Elastase production by B16-F10 melanoma cells

International Nuclear Information System (INIS)

Shrager, J.B.; Yusa, T.; Netland, P.A.; Zetter, B.R.

1986-01-01

Elastolytic activity was found in sonicates of mouse B16-F10 melanoma cells and in medium conditioned by these cells. Degradation of elastin was determined by measuring the release of soluble 3 H-peptides from labelled insoluble elastin. The activity secreted from B16-F10 cells was soluble and was not associated with membrane vesicles. The secreted activity was partially inhibited by incubation with phenymethylsulfonylfluoride (PMSF) and was abolished by incubation with the alpha-1-protease inhibitor, with pepstatin A or with L-1-tosylamide-2-phenylethyl chloromethyl ketone (TPCK). In contrast, the activity was unaffected by incubation with elastatinal, with the plasmin inhibitor Σ-aminocaproic acid (EACA), the metalloproteinase inhibitor ethylenediamine-tetra-acetic acid (EDTA), the soybean trypsin inhibitor or the trypsin inhibitor N proportional to-p-tosyl-L-lysine chloromethyl ketone (TLCK). These results suggest that the majority of the tumor cell-derived elastolytic activity is attributable to a serine protease that differs in specificity from the well characterized elastases previously isolated from neutrophils, macrophages or from mammalian pancreas. The authors postulate that the release of elastase from lung-colonizing B16-F10 cells may facilitate their invasion of elastin-rich lung tissue

Organic light-emitting diodes with F16CuPC as an efficient hole-injection layer

International Nuclear Information System (INIS)

Lee, H. K.; Shin, Y. C.; Kwon, D. S.; Lee, C. H.

2006-01-01

We report a new hole-injection material, copper hexadecafluorophthalocyanine (F 16 CuPC) for organic light-emitting diodes (OLEDs) consisting of N,N'-di(1-naphthyl)-N,N'-diphenylbenzidine (α-NPD) as a hole-transport layer and 8-tris-hydroxyquinoline aluminum (Alq 3 ) as a light-emitting and electron-transport layer. The insertion of the F 16 CuPC between indium-tin oxide (ITO) and α-NPD reduces the operating voltage significantly and thereby increases the luminous efficiency. By measuring the device characteristics for various F 16 CuPC thicknesses, we find that an optimum F 16 CuPC thickness is about 15 nm. At a luminance of 1000 cd/m 2 , the device with 15-nm-thick F 16 CuPC shows a luminous efficiency of 1.5 lm/W and a device operating voltage of 7.2 V while the device without the F 16 CuPC layer shows 1.1 lm/W and 10.4 V. The significant decrease in a driving voltage and increase in the luminous efficiency can be attributed to the high hole-injection efficiency when F 16 CuPC is inserted between ITO and α-NPD.

Integrated care information technology.

Science.gov (United States)

Rowe, Ian; Brimacombe, Phil

2003-02-21

Counties Manukau District Health Board (CMDHB) uses information technology (IT) to drive its Integrated Care strategy. IT enables the sharing of relevant health information between care providers. This information sharing is critical to closing the gaps between fragmented areas of the health system. The tragic case of James Whakaruru demonstrates how people have been falling through those gaps. The starting point of the Integrated Care strategic initiative was the transmission of electronic discharges and referral status messages from CMDHB's secondary provider, South Auckland Health (SAH), to GPs in the district. Successful pilots of a Well Child system and a diabetes disease management system embracing primary and secondary providers followed this. The improved information flowing from hospital to GPs now enables GPs to provide better management for their patients. The Well Child system pilot helped improve reported immunization rates in a high health need area from 40% to 90%. The diabetes system pilot helped reduce the proportion of patients with HbA1c rang:9 from 47% to 16%. IT has been implemented as an integral component of an overall Integrated Care strategic initiative. Within this context, Integrated Care IT has helped to achieve significant improvements in care outcomes, broken down barriers between health system silos, and contributed to the establishment of a system of care continuum that is better for patients.

F-16 Media Selection and Utilization Plan Report.

Science.gov (United States)

1981-03-01

F0260A-79-C-887S Eommhhmhhhhhmu EmhEmhEEohhhEE Efl ~fflflEfl EN 11111 ~ ~ 111 5_______ III mi o - ~ I I . I 1 N I t 1 , I F16 AIRCREW TRAININgN...two to three objectives per segment, and the types of objective (and thus the type of instructional strategy required to teach it) will not be mixed... teaching of a given objective can be identified. Since the medium is the device for presenting displays and handling all interactions between the student

Integration оf Foreign Educational Technologies іn the Content of Program of Pre-School Education in Ukraine

Directory of Open Access Journals (Sweden)

Nadiia Frolenkova

2017-02-01

Full Text Available Reveals the integration and implementation of foreign educational technologies in the content of educational programs of preschool education in Ukraine. The emphasis on the implementation of programs for the ideas of Waldorf education, Montessori programs, “SelfEsteem”, “Step by Step”, “Education for sustainable development for children of pre-school age”. It is proved that the integration of foreign educational technologies in the process of optimizing the scientific and methodological support preschool education content Ukraine simulated based priority, primarily oriented humanistic, pedagogical ideas and technologies.Key words: educational technologies, integration, educational program, content of preschool education, children of pre-school age.

F-16D Pacer Calibration Techniques (SPEED PACER)

Science.gov (United States)

2012-07-01

from the calibration FTTs and therefore, would add flight hours to accomplish. Other variables used in creation of the total costs are as follows: F-16... ZULU Time --- ∆ static source error correction n/d Δ Psic static pressure instrument error correction inHg Δ Ptic total pressure

PCR-Independent Detection of Bacterial Species-Specific 16S rRNA at 10 fM by a Pore-Blockage Sensor

Directory of Open Access Journals (Sweden)

Leyla Esfandiari

2016-07-01

Full Text Available A PCR-free, optics-free device is used for the detection of Escherichia coli (E. coli 16S rRNA at 10 fM, which corresponds to ~100–1000 colony forming units/mL (CFU/mL depending on cellular rRNA levels. The development of a rapid, sensitive, and cost-effective nucleic acid detection platform is sought for the detection of pathogenic microbes in food, water and body fluids. Since 16S rRNA sequences are species specific and are present at high copy number in viable cells, these nucleic acids offer an attractive target for microbial pathogen detection schemes. Here, target 16S rRNA of E. coli at 10 fM concentration was detected against a total RNA background using a conceptually simple approach based on electromechanical signal transduction, whereby a step change reduction in ionic current through a pore indicates blockage by an electrophoretically mobilized bead-peptide nucleic acid probe conjugate hybridized to target nucleic acid. We investigated the concentration detection limit for bacterial species-specific 16S rRNA at 1 pM to 1 fM and found a limit of detection of 10 fM for our device, which is consistent with our previous finding with single-stranded DNA of similar length. In addition, no false positive responses were obtained with control RNA and no false negatives with target 16S rRNA present down to the limit of detection (LOD of 10 fM. Thus, this detection scheme shows promise for integration into portable, low-cost systems for rapid detection of pathogenic microbes in food, water and body fluids.

Individual, work-, and flight-related issues in F-16 pilots reporting neck pain

NARCIS (Netherlands)

de Loose, Veerle; van den Oord, Marieke; Burnotte, Frédéric; van Tiggelen, Damien; Stevens, Veerle; Cagnie, Barbara; Witvrouw, Erik; Danneels, Lieven

2008-01-01

INTRODUCTION: Neck pain is a common problem in F-16 pilots. A cross-sectional survey was used to determine the self-reported 1-yr prevalence of neck pain and to compare individual, work-related, and flight-related characteristics in F-16 pilots with and without neck pain. METHOD: There were 90 male

Design and Simulation of a PIC16F877A and LM35 Based ...

African Journals Online (AJOL)

This paper describes the design and simulation of a temperature virtual monitoring system using proteus (Labcenter electronics). The device makes use of the PIC16F877A, LM35, 2x16 LCD and other discrete components. The lm35 serve as the temperature sensor, whose output is fed into the PIC16F877A for further ...

Investigation of the reaction 16O(p,n)16F at Esub(p)=135 MeV

International Nuclear Information System (INIS)

Gareev, F.A.; Ershov, S.N.

1984-01-01

The 16 O(p,n) 16 F reaction at 135 MeV has been analyzed the framework of the distorted-wave impulse-approximation (DWIA). Both direct and exchange mechanisms of nucleon knock-out are taken into account. Including the n-particle n-hole (n=0, 1, 2) correlations in the wave functions of A=16 nuclei improves the description of experimental data: diminishes the absolute value of the cross sections about twice as compared with the calculations using the simple particle-hole structure models

MTG16 contributes to colonic epithelial integrity in experimental colitis

Science.gov (United States)

Williams, Christopher S; Bradley, Amber M; Chaturvedi, Rupesh; Singh, Kshipra; Piazuelo, Maria B; Chen, Xi; McDonough, Elizabeth M; Schwartz, David A; Brown, Caroline T; Allaman, Margaret M; Coburn, Lori A; Horst, Sara N; Beaulieu, Dawn B; Choksi, Yash A; Washington, Mary Kay; Williams, Amanda D; Fisher, Melissa A; Zinkel, Sandra S; Peek, Richard M; Wilson, Keith T; Hiebert, Scott W

2013-01-01

Objective The myeloid translocation genes (MTGs) are transcriptional corepressors with both Mtg8−/− and Mtgr1−/− mice showing developmental and/or differentiation defects in the intestine. We sought to determine the role of MTG16 in intestinal integrity. Methods Baseline and stress induced colonic phenotypes were examined in Mtg16−/− mice. To unmask phenotypes, we treated Mtg16−/− mice with dextran sodium sulphate (DSS) or infected them with Citrobacter rodentium and the colons were examined for ulceration and for changes in proliferation, apoptosis and inflammation. Results Mtg16−/− mice have altered immune subsets, suggesting priming towards Th1 responses. Mtg16−/− mice developed increased weight loss, diarrhoea, mortality and histological colitis and there were increased innate (Gr1+, F4/80+, CD11c+ and MHCII+; CD11c+) and Th1 adaptive (CD4) immune cells in Mtg16−/− colons after DSS treatment. Additionally, there was increased apoptosis and a compensatory increased proliferation in Mtg16−/− colons. Compared with wild-type mice, Mtg16−/− mice exhibited increased colonic CD4;IFN-γ cells in vehicle-treated and DSS-treated mice. Adoptive transfer of wildtype marrow into Mtg16−/− recipients did not rescue the Mtg16−/− injury phenotype. Isolated colonic epithelial cells from DSS-treated Mtg16−/− mice exhibited increased KC (Cxcl1) mRNA expression when compared with wild-type mice. Mtg16−/− mice infected with C rodentium had more severe colitis and greater bacterial colonisation. Last, MTG16 mRNA levels were reduced in human ulcerative colitis versus normal colon tissues. Conclusions These observations indicate that MTG16 is critical for colonocyte survival and regeneration in response to intestinal injury and provide evidence that this transcriptional corepressor regulates inflammatory recruitment in response to injury. PMID:22833394

16 CFR Appendix F to Part 698 - General Summary of Consumer Rights

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false General Summary of Consumer Rights F... FORMS AND DISCLOSURES Pt. 698, App. F Appendix F to Part 698—General Summary of Consumer Rights The... consumer. ER30NO04.002 ER30NO04.003 [69 FR 69787, Nov. 30, 2004] ...

Integrated System Health Management (ISHM) Technology Demonstration Project Final Report

Science.gov (United States)

Mackey, Ryan; Iverson, David; Pisanich, Greg; Toberman, Mike; Hicks, Ken

2006-01-01

Integrated System Health Management (ISHM) is an essential capability that will be required to enable upcoming explorations mission systems such as the Crew Exploration Vehicle (CEV) and Crew Launch Vehicle (CLV), as well as NASA aeronautics missions. However, the lack of flight experience and available test platforms have held back the infusion by NASA Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) of ISHM technologies into future space and aeronautical missions. To address this problem, a pioneer project was conceived to use a high-performance aircraft as a low-cost proxy to develop, mature, and verify the effectiveness of candidate ISHM technologies. Given the similarities between spacecraft and aircraft, an F/A-18 currently stationed at Dryden Flight Research Center (DFRC) was chosen as a suitable host platform for the test bed. This report describes how the test bed was conceived, how the technologies were integrated on to the aircraft, and how these technologies were matured during the project. It also describes the lessons learned during the project and a forward path for continued work.

Technology integration plan

International Nuclear Information System (INIS)

Henry, R.; Sumpter, K.C.

1995-01-01

In 1992, the Secretary of Energy directed the Assistant Secretary for Environmental Management (EM) to develop an integrated, long-term, spent nuclear fuel (SNF) management program. In response, EM created the Integrated SNF Program to assess the US Department of Energy (DOE) SNF and SNF storage facilities. As shown in Figure 1 the Integrated SNF Program is responsible for life-cycle management of DOE SNF; that is characterization, processing, interim storage and preparation for disposal. In order to implement the Program it was recognized that technology needs must be identified. A Technology Integration Program was formed to integrate the DOE complex-wide efforts for establishing timely, cost effective and consistent technical criteria for the development of technical solutions. The program is directed toward identification of: (a) what activities need to be done, (b) when they need to be completed, and (c) what priority should be assigned to the various activities

Technology Integration Experiences of Teachers

Science.gov (United States)

Çoklar, Ahmet Naci; Yurdakul, Isil Kabakçi

2017-01-01

Teachers are important providers of educational sustainability. Teachers' ability to adapt themselves to rapidly developing technologies applicable to learning environments is connected with technology integration. The purpose of this study is to investigate teachers' technology integration experiences in the course of learning and teaching…

C5 Extract Induces Apoptosis in B16F10 Murine Melanoma Cells ...

African Journals Online (AJOL)

Purpose: To investigate the anti-cancer activities of C5 extract (C5E), a new herbal preparation from Korea, on B16F10 cells. Methods: The anti-proliferative effects of C5E were assessed by culturing B16F10 cells in the presence or absence of C5E. Cell cycle progression was analyzed by PI staining using flow cytometry.

Examining the Relationship among High-School Teachers' Technology Self-Efficacy, Attitudes towards Technology Integration, and Quality of Technology Integration

Science.gov (United States)

Gonzales, Stacey

2013-01-01

This quantitative study explored the relationships among high-school teachers' (n = 74) technology self-efficacy, teachers' attitudes towards technology integration, and quality of teachers' technology integration into instruction. This study offered the unique perspectives of in-service high-school teachers as they have first-hand experience…

The Impact of a Technology Integration Academy on Instructional Technology Integration in a Texas School District

Science.gov (United States)

Burkholder, Karla

2013-01-01

This applied dissertation was designed to determine the impact of a technology integration professional development on high school teachers' technology integration and students' use of computers in core content areas. The District invested in technology for all classrooms, as well as 1:1 technology for all secondary students with an expectation…

Automatic synthesis of 16α-[18F]fluoro-17β-estradiol using a cassette-type [18F]fluorodeoxyglucose synthesizer

International Nuclear Information System (INIS)

Mori, Tetsuya; Kasamatsu, Shingo; Mosdzianowski, Christoph; Welch, Michael J.; Yonekura, Yoshiharu; Fujibayashi, Yasuhisa

2006-01-01

16α-[ 18 F]fluoro-17β-estradiol ([ 18 F]FES) is a radiotracer for imaging estrogen receptors by positron emission tomography. We developed a clinically applicable automatic preparation system for [ 18 F]FES by modifying a cassette-type [ 18 F]fluorodeoxyglucose synthesizer. Two milligrams of 3-O-methoxymethyl-16,17-O-sulfuryl-16-epiestriol in acetonitrile was heated at 105 o C for 10 min with dried [ 18 F]fluoride. The resultant solution was evaporated and hydrolyzed with 0.2 N HCl in 90% acetonitrile/water at 95 o C for 10 min under pressurized condition. The neutralization was carried out with 2.8% NaHCO 3 , and then the high-performance liquid chromatography (HPLC) purification was performed. The desired radioactive fraction was collected and the solvent was replaced by 10 ml of saline, and then passed through a 0.22-μm filter into a pyrogen-free vial as the final product. The HPLC purification data demonstrated that [ 18 F]FES was synthesized with a yield of 76.4±1.9% (n=5). The yield as the final product for clinical use was 42.4±3.2% (n=5, decay corrected). The total preparation time was 88.2±6.4 min, including the HPLC purification and the solvent replacement process. The radiochemical purity of the final product was >99%, and the specific activity was more than 111 GBq/μmol. The final product was stable for more than 6 h in saline containing sodium ascorbate. This new preparation system enables us to produce [ 18 F]FES safe for clinical use with high and reproducible yield

16 December 2013 - P. Lavie President of the Technion Institute of Technology in Israel visiting the ATLAS cavern with ATLAS Deputy Spokesperson T. Wengler; visiting the LHC tunnel at Point 1 with Technology Department Head F. Bordry and signing the Guest Book with CERN Director-General R. Heuer. G. Mikenberg, E. Rabinovici, Y. Rozen and S. Tarem present throughout.

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

16 December 2013 - P. Lavie President of the Technion Institute of Technology in Israel visiting the ATLAS cavern with ATLAS Deputy Spokesperson T. Wengler; visiting the LHC tunnel at Point 1 with Technology Department Head F. Bordry and signing the Guest Book with CERN Director-General R. Heuer. G. Mikenberg, E. Rabinovici, Y. Rozen and S. Tarem present throughout.

Preparation of 16α[18F] fluoro-17β-fluoroestradiol on domestic synthesis module

International Nuclear Information System (INIS)

Sun Chuanjin; Zhu Hong; Fang Keyuan

2012-01-01

To investigate the synthesis method of 16α-[ 18 F] fluoro-17β-fluoroestradiol on domestic synthesizing module, the automated synthesis was carried out through the reaction of 3-O-(methoxymethyl) -16,17-O-sulfuryl-16-epiestriol (MMSE, 1 mg) as precursor with 18 F- at 105 ℃ for 15 min in sealed system on domestic synthesizer, then 0.8 mL 1 mol/L HC1 dissolved in 7.2 mL acetonetrile was added in three parts to the reaction vessel for hydrolysis and hydrolysis reaction was performed at 105 ℃ for 6 min. The final reaction solution was purified by HPLC to give 18 F-FES. Preparation of 18 F-FES on domestic synthesis module was in the uncorrected synthesis yield of 8.2% (corrected synthesis yield 12.8%). Total synthesis time was about 70 min and radiochemical purity was higher than 98%. The product had good stability at room temperature. 18 F-FES injection can be prepared on domes- tic synthesis module and the quality can meet the requirements of radiopharmaceuticals for clinical use, (authors)

SenSyF Experience on Integration of EO Services in a Generic, Cloud-Based EO Exploitation Platform

Science.gov (United States)

Almeida, Nuno; Catarino, Nuno; Gutierrez, Antonio; Grosso, Nuno; Andrade, Joao; Caumont, Herve; Goncalves, Pedro; Villa, Guillermo; Mangin, Antoine; Serra, Romain; Johnsen, Harald; Grydeland, Tom; Emsley, Stephen; Jauch, Eduardo; Moreno, Jose; Ruiz, Antonio

2016-08-01

SenSyF is a cloud-based data processing framework for EO- based services. It has been pioneer in addressing Big Data issues from the Earth Observation point of view, and is a precursor of several of the technologies and methodologies that will be deployed in ESA's Thematic Exploitation Platforms and other related systems.The SenSyF system focuses on developing fully automated data management, together with access to a processing and exploitation framework, including Earth Observation specific tools. SenSyF is both a development and validation platform for data intensive applications using Earth Observation data. With SenSyF, scientific, institutional or commercial institutions developing EO- based applications and services can take advantage of distributed computational and storage resources, tailored for applications dependent on big Earth Observation data, and without resorting to deep infrastructure and technological investments.This paper describes the integration process and the experience gathered from different EO Service providers during the project.

Educational Technology: Integration?

Science.gov (United States)

Christensen, Dean L.; Tennyson, Robert D.

This paper presents a perspective of the current state of technology-assisted instruction integrating computer language, artificial intelligence (AI), and a review of cognitive science applied to instruction. The following topics are briefly discussed: (1) the language of instructional technology, i.e., programming languages, including authoring…

Elementary Education Pre-Service Teachers' Development of Mathematics Technology Integration Skills in a Technology Integration Course

Science.gov (United States)

Polly, Drew

2015-01-01

Preparing pre-service teachers to effectively integrate technology in the classroom requires rich experiences that deepen their knowledge of technology, pedagogy, and content and the intersection of these aspects. This study examined elementary education pre-service teachers' development of skills and knowledge in a technology integration course…

Planning for Integrating Teaching Technologies

Directory of Open Access Journals (Sweden)

Mandie Aaron

2004-06-01

Full Text Available Teaching technologies offer pedagogical advantages which vary with specific contexts. Successfully integrating them hinges on clearly identifying pedagogical goals, then planning for the many decisions that technological change demands. In examining different ways of organizing this process, we have applied planning tools from other domains - Fault Tree Analysis and Capability Maturity Modeling- at the school and college levels. In another approach, we have examined attempts to broadly model the integration process at the university level. Our studies demonstrate that the use of a variety of tools and techniques can render the integration of teaching technologies more systematic.

Propulsion/flight control integration technology (PROFIT) software system definition

Science.gov (United States)

Carlin, C. M.; Hastings, W. J.

1978-01-01

The Propulsion Flight Control Integration Technology (PROFIT) program is designed to develop a flying testbed dedicated to controls research. The control software for PROFIT is defined. Maximum flexibility, needed for long term use of the flight facility, is achieved through a modular design. The Host program, processes inputs from the telemetry uplink, aircraft central computer, cockpit computer control and plant sensors to form an input data base for use by the control algorithms. The control algorithms, programmed as application modules, process the input data to generate an output data base. The Host program formats the data for output to the telemetry downlink, the cockpit computer control, and the control effectors. Two applications modules are defined - the bill of materials F-100 engine control and the bill of materials F-15 inlet control.

Probing nuclear forces beyond the drip-line using the mirror nuclei N-16 and F-16

Czech Academy of Sciences Publication Activity Database

Stefan, I.; de Oliveira Santos, F.; Sorlin, O.; Davinson, T.; Lewitowicz, M.; Dumitru, G.; Angelique, J. C.; Angelique, M.; Berthoumieux, E.; Borcea, C.; Borcea, R.; Buta, A.; Daugas, J. M.; De Grancey, F.; Fadil, M.; Grévy, S.; Kiener, J.; Lefebvre-Schuhl, A.; Lenhardt, M.; Mrázek, Jaromír; Negoita, F.

2014-01-01

Roč. 90, č. 1 (2014), 014307 ISSN 0556-2813 Institutional support: RVO:61389005 Keywords : nuclear reactions * differential cross sections * 15,16F * deduced levels * resonances * spectroscopic factors * R-matrix analysis Subject RIV: BG - Nuclear, Atomic and Molecular Physics , Colliders Impact factor: 3.733, year: 2014

Technologies Avancées - Vol 16 (2003)

African Journals Online (AJOL)

Navigation neuro-floue d'un robot mobile dans un environment inconnu avec un apprentissage par renforcement · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. W Nouibat, Z A Foitih, F A Haouari, 19-30. http://dx.doi.org/10.4314/ta.v16i1.18474 ...

Teacher Beliefs and Technology Integration

Science.gov (United States)

Kim, ChanMin; Kim, Min Kyu; Lee, Chiajung; Spector, J. Michael; DeMeester, Karen

2013-01-01

The purpose of this exploratory mixed methods study was to investigate how teacher beliefs were related to technology integration practices. We were interested in how and to what extent teachers' (a) beliefs about the nature of knowledge and learning, (b) beliefs about effective ways of teaching, and (c) technology integration practices were…

Business and technology integrated model

OpenAIRE

Noce, Irapuan; Carvalho, João Álvaro

2011-01-01

There is a growing interest in business modeling and architecture in the areas of management and information systems. One of the issues in the area is the lack of integration between the modeling techniques that are employed to support business development and those used for technology modeling. This paper proposes a modeling approach that is capable of integrating the modeling of the business and of the technology. By depicting the business model, the organization structure and the technolog...

Authentic Learning Exercises as a Means to Influence Preservice Teachers' Technology Integration Self-Efficacy and Intentions to Integrate Technology

Science.gov (United States)

Banas, Jennifer R.; York, Cindy S.

2014-01-01

This study explored the impact of authentic learning exercises, as an instructional strategy, on preservice teachers' technology integration self-efficacy and intentions to integrate technology. Also explored was the predictive relationship between change in preservice teachers' technology integration self-efficacy and change in intentions to…

Heterogeneous Integration Technology

Science.gov (United States)

2017-05-19

integrated CMOS imaging system for high frame rate applications [171]. .................... 68 Figure 83: CPU-DRAM Memory Landscape . [127... film transistors (TFT) were integrated with GaN HEMTs on the same wafer at AFRL. The thin film transistor fabrication using metal-oxide...second layer. Layer transfer produces the best quality devices compared to other additive technologies such as re-crystallization of thin films [148

Radioactivity measurement of 18F in 16 ml vials for calibration of radionuclide calibrators

International Nuclear Information System (INIS)

Wurdiyanto, Gatot; Marsoem, Pujadi; Candra, Hermawan; Wijono, Paidi

2012-01-01

Fluorine-18 is obtained through the reaction 18 O(p, n) 18 F using a cyclotron that is situated in a hospital in Jakarta. Standardization of the 18 F solution is performed by gamma spectrometry using calibration sources of 152 Eu, 60 Co and 137 Cs that have traceability to the International System of units (SI). The activities in the 16 ml vials that were used for calibrating the radionuclide calibrators were between 1 and 2 GBq, with expanded uncertainties of 3.8%. The expanded uncertainty, at a coverage factor of k=2, on the derived calibration factor for the radionuclide calibrator was 6.6%. - Highlights: ► PTKMR–BATAN as a NMI of Indonesia is required to have procedures to calibrate the radionuclide calibrators. ► Standardizations were carried out on a solution of [ 18 F]FDG using gamma spectrometry. ► The volume of 18 F solutions used was 16 ml because this is the volume often used in hospitals. ► The Secondary Standard ionization chamber is a CRC-7BT Capintec radionuclide calibrator. ► A dial setting for 16 ml of [ 18 F]FDG solution in a vial is 443 for the Capintec dose calibrator.

Prevalence of the integration status for human papillomavirus 16 in esophageal carcinoma samples.

Science.gov (United States)

Li, Shuying; Shen, Haie; Li, Ji; Hou, Xiaoli; Zhang, Ke; Li, Jintao

2018-03-01

To investigate the etiology of esophageal cancer (EC) related with human papillomavirus (HPV) infection. Fresh surgically resected tissue samples and clinical information were obtained from 189 patients. Genomic DNA was extracted, and HPV was detected using polymerase chain reaction (PCR) with HPV L1 gene primers of MY09/11; HPV16 was detected using HPV16 E6 type-specific primer sets. Copies of HPV16 E2, E6, and the human housekeeping gene β-actin were tested using quantitative PCR to analyze the relationship between HPV16 integration and esophageal squamous cell carcinoma and the relationship between the HPV16 integration status and clinical information of patients. Of the 189 samples, 168 HPV-positive samples were detected, of which 76 were HPV16 positive. Among the HPV16 positive samples, 2 cases (E2/E6 ratio>1) were 2.6% (2/76) purely episomal, 65 (E2/E6 ratio between 0 and 1) were 85.6% (65/76) mixture of integrated and episomal, and 9 (E2/E6 ratio=0) were 11.8% (9/76) purely integrated. The results indicate that integration of HPV16 was more common in the host genome than in the episome genome. The prevalence rate of HPV16 integration is increasing with the pathological stage progression of esophageal carcinoma (EC). A high prevalence of HPV16 suggested that HPV16 has an etiological effect on the progress of EC. Integration of HPV16 is more common than episome genome in the host cells, indicating that continuous HPV infection is the key to esophageal epithelial cell malignant conversion and canceration.

Integrative production technology theory and applications

CERN Document Server

Özdemir, Denis

2017-01-01

This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students. .

16 CFR Appendix F to Part 436 - Sample Item 20(5) Table-Projected New Franchised Outlets

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Sample Item 20(5) Table-Projected New Franchised Outlets F Appendix F to Part 436 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES DISCLOSURE REQUIREMENTS AND PROHIBITIONS CONCERNING FRANCHISING Pt. 436, App. F Appendix F to Part...

Technology Integration through Professional Learning Community

Science.gov (United States)

Cifuentes, Lauren; Maxwell, Gerri; Bulu, Sanser

2011-01-01

We describe efforts to build a learning community to support technology integration in three rural school districts and the contributions of various program strategies toward teacher growth. The Stages of Adoption Inventory, classroom observations, the Questionnaire for Technology Integration, interviews, STAR evaluation surveys, a survey of…

Teacher Models of Technology Integration.

Science.gov (United States)

Peterman, Leinda

2003-01-01

Provides examples of best practices in technology integration from five Technology Innovation Challenge Grant (TICG) programs, funded through the Department of Education to meet the No Child Left Behind technology goals. Highlights include professional development activities in Louisiana and New Mexico; collaborative learning applications; and…

Cytotoxicity of the coagulant Moringa oleifera lectin (cMoL) to B16-F10 melanoma cells.

Science.gov (United States)

de Andrade Luz, Luciana; Rossato, Franco Aparecido; Costa, Rute Alves Pereira E; Napoleão, Thiago Henrique; Paiva, Patrícia Maria Guedes; Coelho, Luana Cassandra Breitenbach Barroso

2017-10-01

Moringa oleifera seeds are used in alternative medicine to treat inflammation, tumors and bacterial and protozoan infections, for example. The seeds contain lectins, which are carbohydrate-binding proteins with several biological properties including cytotoxicity to cancer cells. In this work, we examined the cytotoxicity of the coagulant M. oleifera lectin (cMoL) on B16-F10 murine melanoma cells. cMoL cytotoxic effects were evaluated through trypan blue assay and flow cytometry analysis. Mitochondrial superoxide levels and activation of caspases 3, 8 and 9 were measured. cMoL (1.5-16μM) reduced viability and caused cell death of B16-F10 cells with an IC 50 of 9.72μM. Flow cytometry analysis indicated induction of necrosis and suggested the presence of cells in late apoptosis. Specificity for tumor cells was observed since death of normal human fibroblasts (GN) was not higher than 20% in treatments with cMoL from 1.5 to 16μM. Microscopy images revealed rounded shape and reduction of volume in B16-F10 cells treated with cMoL. cMoL increased mitochondrial ROS production and promoted caspases 3, 8 and 9 activation in B16-F10 cells, indicating the activation of apoptosis-related pathway. In conclusion, this study demonstrates that cMoL is cytotoxic to B16-F10 cells, which stimulates more investigation on the anticancer potential of this lectin. Copyright © 2017 Elsevier Ltd. All rights reserved.

Technology Integration and Technology Leadership in Schools as Learning Organizations

Science.gov (United States)

Cakir, Recep

2012-01-01

The purpose of this study was to investigate technology integration in primary schools from the perspective of leadership in learning organizations. To that end, the study examines two groups: school administrators who play effective roles in technology integration in schools and computer teachers who are mainly responsible for schools' technology…

Development of system integration technology for integral reactor

Energy Technology Data Exchange (ETDEWEB)

Chang, Moon Hee; Kang, D. J.; Kim, K. K. and others

1999-03-01

The objective of this report is to integrate the conceptual design of an integral reactor, SMART producing thermal energy of 330 MW, which will be utilized to supply energy for seawater desalination and small-scale power generation. This project also aims to develop system integration technology for effective design of the reactor. For the conceptual design of SMART, preliminary design requirements including the top-tier requirements and design bases were evaluated and established. Furthermore, in the view of the application of codes and standards to the SMART design, existing laws, codes and standards were analyzed and evaluated with respect to its applicability. As a part of this evaluation, directions and guidelines were proposed for the development of new codes and standards which shall be applied to the SMART design. Regarding the integration of SMART conceptual designs, major design activities and interfaces between design departments were established and coordinated through the design process. For the effective management of all design schedules, a work performance evaluation system was developed and applied to the design process. As the results of this activity, an integrated output of SMART designs was produced. Two additional scopes performed in this project include the preliminary economic analysis on the SMART utilization for seawater desalination, and the planning of verification tests for technology implemented into SMART and establishing development plan of the computer codes to be used for SMART design in the next phase. The technical cooperation with foreign country and international organization for securing technologies for integral reactor design and its application was coordinated and managed through this project. (author)

Market Integration, Choice of Technology and Welfare

DEFF Research Database (Denmark)

Hansen, Jørgen Drud; Nielsen, Jørgen Ulff-Møller

2010-01-01

technologies. Market integration may induce a technological restructuring where firms either diversify their technologies or switch to a homogeneous technology. In general, market integration improves welfare. However, a small decrease of trade costs which induces a switch from heterogeneous technologies...... to a homogeneous technology may locally reduce global welfare. The model also shows that productivity differences lead to intra-industry firm heterogeneity in size and exports similar to the "new-new" trade models with monopolistic competition....

Comparison of Quantity Versus Quality Using Performance, Reliability, and Life Cycle Cost Data. A Case Study of the F-15, F-16, and A-10 Aircraft.

Science.gov (United States)

1985-09-01

CoC S~04 COMPARISON OF QUANTITY VERSUS QUALITY USING PERFORMANCE, RELIABILITY, AND LIFE CYCLE COST DATA. A CASE STUDY OF THE F-15, F-16, AND A-10...CYCLE COSTIATU.AT CAE AIR ORE HEO OG .- jAITR UIVERSITY W right.,Patterson Air Force Base, Ohio .! 5ൔ ,6 198 C.IT. U AF’IT/GSL,4/L3Q/65:S Ŗ J...COMPARISON OF QUANTITY VERSUS QUALITY USING PERFORMANCE, RELIABILITY, AND LIFE CYCLE COST DATA. A CASE STUDY OF THE F-15, F-16, AND A-10 AIRCRAFT THESIS David

Converging Technologies for Improving Human Performance: Integrating From the Nanoscale

International Nuclear Information System (INIS)

Roco, M.C.; Bainbridge, W.S.

2002-01-01

In the early decades of the twenty-first century, concentrated efforts can unify science based on the unity of nature, thereby advancing the combination of nanotechnology, biotechnology, information technology, and new humane technologies based in cognitive science. Converging technologies integrated from the nanoscale could determine a tremendous improvement in human abilities and societal outcomes. This is a broad, cross cutting, emerging, and timely opportunity of interest to individuals, society, and humanity in the long term.About eighty scientific leaders, industry experts, and policy makers across a range of fields have contributed to develop a vision for the potential to improve human physical, mental, and social capabilities through the convergence of the four technologies. Six major themes have emerged: (a) The broad potential of converging technologies; (b) Expanding human cognition and communication; (c) Improving human health and physical capabilities; (d) Enhancing group and societal outcomes; (e) National security, and (f) Unifying science and education. This article summarizes the observations, conclusions, and recommendations made in the report (Roco and Bainbridge, eds., 2002. Converging Technologies for Improving Human Performance, NSF-DOC Report, June 2002, Arlington VA, USA)

16 CFR 1511.5 - Structural integrity tests.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Structural integrity tests. 1511.5 Section 1511.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT... lowest position in the cylinder. If the uppermost edge of the component or fragment is below the plane of...

Rural Elementary School Teachers' Technology Integration

Science.gov (United States)

Howley, Aimee; Wood, Lawrence; Hough, Brian

2011-01-01

Based on survey responses from more than 500 third-grade teachers, this study addressed three research questions relating to technology integration and its impact in rural elementary schools. The first analyses compared rural with non-rural teachers, revealing that the rural teachers had more positive attitudes toward technology integration. Then…

Comprehensive mapping of the human papillomavirus (HPV) DNA integration sites in cervical carcinomas by HPV capture technology.

Science.gov (United States)

Liu, Ying; Lu, Zheming; Xu, Ruiping; Ke, Yang

2016-02-02

Integration of human papillomavirus (HPV) DNA into the host genome can be a driver mutation in cervical carcinoma. Identification of HPV integration at base resolution has been a longstanding technical challenge, largely due to sensitivity masking by HPV in episomes or concatenated forms. The aim was to enhance the understanding of the precise localization of HPV integration sites using an innovative strategy. Using HPV capture technology combined with next generation sequencing, HPV prevalence and the exact integration sites of the HPV DNA in 47 primary cervical cancer samples and 2 cell lines were investigated. A total of 117 unique HPV integration sites were identified, including HPV16 (n = 101), HPV18 (n = 7), and HPV58 (n = 9). We observed that the HPV16 integration sites were broadly located across the whole viral genome. In addition, either single or multiple integration events could occur frequently for HPV16, ranging from 1 to 19 per sample. The viral integration sites were distributed across almost all the chromosomes, except chromosome 22. All the cervical cancer cases harboring more than four HPV16 integration sites showed clinical diagnosis of stage III carcinoma. A significant enrichment of overlapping nucleotides shared between the human genome and HPV genome at integration breakpoints was observed, indicating that it may play an important role in the HPV integration process. The results expand on knowledge from previous findings on HPV16 and HPV18 integration sites and allow a better understanding of the molecular basis of the pathogenesis of cervical carcinoma.

Antimelanogenic, Antioxidant and Antiproliferative Effects of Antrodia camphorata Fruiting Bodies on B16-F0 Melanoma Cells.

Directory of Open Access Journals (Sweden)

Jyh-Jye Wang

Full Text Available Antrodia camphorata is a fungus that is endemic to Taiwan, and its fruiting body has been used as a folk medicine for the prevention or treatment of diverse diseases. The present study is aimed at investigating the antimelanogenesis and antioxidation effect of the ethanolic extract of Antrodia camphorata fruiting body (EE-AC, as well as its antiproliferation effects in B16-F0 melanoma cells. Regarding antimelanogenic effects, EE-AC had effective cupric ions reducing capacity and expressed more potent inhibitory effect than kojic acid on mushroom tyrosinase activity. Moreover, EE-AC significantly inhibited cellular tyrosinase activity and the melanin content in B16-F0 cells at 12.5 μg/mL concentration without cell toxicities. Regarding antioxidant effects, EE-AC exhibited potent DPPH radical- and SOD-like-scavenging activities. Regarding antiproliferative effects, EE-AC exhibited a selective cytotoxic effect and markedly inhibited the migration ability of B16-F0 cells. EE-AC increased the population of B16-F0 cells at sub-G1 phase of the cell cycle. EE-AC also caused the increase of early apoptotic cells and chromatin condensation, which indicated the apoptotic effects in B16-F0 cells. We demonstrated that EE-AC possessed antimelanogenic, antioxidant and anti-skin cancer actions. The results would contribute to the development and application of cosmetics, healthy food and pharmaceuticals.

Technology Improvement for the High Reliability LM-2F Launch Vehicle

Institute of Scientific and Technical Information of China (English)

QIN Tong; RONG Yi; ZHENG Liwei; ZHANG Zhi

2017-01-01

The Long March 2F (LM-2F) launch vehicle,the only launch vehicle designed for manned space flight in China,successfully launched the Tiangong 2 space laboratory and the Shenzhou ll manned spaceship into orbits in 2016 respectively.In this study,it introduces the technological improvements for enhancing the reliability of the LM-2F launch vehicle in the aspects of general technology,control system,manufacture and ground support system.The LM2F launch vehicle will continue to provide more contributions to the Chinese Space Station Project with its high reliability and 100％ success rate.

Strategic Analysis of Technology Integration at Allstream

OpenAIRE

Brown, Jeff

2011-01-01

Innovation has been defined as the combination of invention and commercialization. Invention without commercialization is rarely, if ever, profitable. For the purposes of this paper the definition of innovation will be further expanded into the concept of technology integration. Successful technology integration not only includes new technology introduction, but also the operationalization of the new technology within each business unit of the enterprise. This paper conducts an analysis of Al...

Extending Database Integration Technology

National Research Council Canada - National Science Library

Buneman, Peter

1999-01-01

Formal approaches to the semantics of databases and database languages can have immediate and practical consequences in extending database integration technologies to include a vastly greater range...

Integrating rehabilitation engineering technology with biologics.

Science.gov (United States)

Collinger, Jennifer L; Dicianno, Brad E; Weber, Douglas J; Cui, Xinyan Tracy; Wang, Wei; Brienza, David M; Boninger, Michael L

2011-06-01

Rehabilitation engineers apply engineering principles to improve function or to solve challenges faced by persons with disabilities. It is critical to integrate the knowledge of biologics into the process of rehabilitation engineering to advance the field and maximize potential benefits to patients. Some applications in particular demonstrate the value of a symbiotic relationship between biologics and rehabilitation engineering. In this review we illustrate how researchers working with neural interfaces and integrated prosthetics, assistive technology, and biologics data collection are currently integrating these 2 fields. We also discuss the potential for further integration of biologics and rehabilitation engineering to deliver the best technologies and treatments to patients. Engineers and clinicians must work together to develop technologies that meet clinical needs and are accessible to the intended patient population. Copyright © 2011 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

International Nuclear Information System (INIS)

Williams, C.V.; Burford, T.D.

1996-08-01

Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy's (DOE's) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID's technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID

Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

Energy Technology Data Exchange (ETDEWEB)

Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)

1996-08-01

Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

Toward a Comprehensive Framework for Evaluating the Core Integration Features of Enterprise Integration Middleware Technologies

Directory of Open Access Journals (Sweden)

Hossein Moradi

2013-01-01

Full Text Available To achieve greater automation of their business processes, organizations face the challenge of integrating disparate systems. In attempting to overcome this problem, organizations are turning to different kinds of enterprise integration. Implementing enterprise integration is a complex task involving both technological and business challenges and requires appropriate middleware technologies. Different enterprise integration solutions provide various functions and features which lead to the complexity of their evaluation process. To overcome this complexity, appropriate tools for evaluating the core integration features of enterprise integration solutions is required. This paper proposes a new comprehensive framework for evaluating the core integration features of both intra-enterprise and inter-enterprise Integration's enabling technologies, which simplify the process of evaluating the requirements met by enterprise integration middleware technologies.The proposed framework for evaluating the core integration features of enterprise integration middleware technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various enterprise integration middleware technologies are categorized in different classifications and are evaluated based on their supporting level for the core integration features' criteria. These criteria include the functional and supporting features. The proposed framework, which is a revised version of our previous framework in this area, has developed the scope, structure and content of the mentioned framework.

Integrating Product and Technology Development

DEFF Research Database (Denmark)

Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

.g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

Understanding Technology Literacy: A Framework for Evaluating Educational Technology Integration

Science.gov (United States)

Davies, Randall S.

2011-01-01

Federal legislation in the United States currently mandates that technology be integrated into school curricula because of the popular belief that learning is enhanced through the use of technology. The challenge for educators is to understand how best to teach with technology while developing the technological expertise of their students. This…

Integrating Informatics Technologies into Oracle

Directory of Open Access Journals (Sweden)

Manole VELICANU

2006-01-01

Full Text Available A characteristic of the actual informatics’ context is the interference of the technologies, which assumes that for creating an informatics product, is necessary to use integrate many technologies. This thing is also used for database systems which had integrated, in the past few years, almost everything is new in informatics technology. The idea is that when using database management systems - DBMS the user can benefit all the necessary interfaces and instruments for developing an application with databases from the very beginning to the end, no matter the type of application and the work environment. For example, if the database application needs any Internet facilities these could be appealed from the products that the DBMS is working with offers. The concept of the interference of informatics technologies has many advantages, which all contribute to increasing the efficiency of the activities that develop and maintain complex databases applications.

Buried Waste Integrated Demonstration lessons learned: 1993 technology demonstrations

International Nuclear Information System (INIS)

Kostelnik, K.M.; Owens, K.J.

1994-01-01

An integrated technology demonstration was conducted by the Buried Waste Integrated Demonstration (BWID) at the Idaho National Engineering Laboratory Cold Test Pit in the summer of 1993. This program and demonstration was sponsored by the US Department of Energy Office of Technology Development. The demonstration included six technologies representing a synergistic system for the characterization and retrieval of a buried hazardous waste site. The integrated technology demonstration proved very successful and a summary of the technical accomplishments is presented. Upon completion of the integrated technology demonstration, cognizant program personnel participated in a lessons learned exercise. This exercise was conducted at the Simplot Decision Support Center at Idaho State University and lessons learned activity captured additional information relative to the integration of technologies for demonstration purposes. This information will be used by BWID to enhance program planning and strengthen future technology demonstrations

DEACTIVATION AND DECOMMISSIONING (D AND D) TECHNOLOGY INTEGRATION

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian, Ph.D.

1999-01-01

As part of the ongoing task of making Deactivation and Decommissioning (D&D) operations more efficient, this subtask has addressed the need to integrate existing characterization technologies with decontamination technologies in order to provide real-time data on the progress of contamination removal. Specifically, technologies associated with concrete decontamination and/or removal have been examined with the goal of integrating existing technologies and commercializing the resulting hybrid. The Department of Energy (DOE) has estimated that 23 million cubic meters of concrete will require disposition as 1200 buildings undergo the D&D process. All concrete removal to be performed will also necessitate extensive use of characterization techniques. The in-process characterization presents the most potential for improvement and cost-savings as compared to other types. Current methods for in-process characterization usually require cessation of work to allow for radiation surveys to assess the rate of decontamination. Combining together decontamination and characterization technologies would allow for in-process evaluation of decontamination efforts. Since the present methods do not use in-process evaluations for the progress of decontamination, they may allow for ''overremoval'' of materials (removal of contaminated along with non-contaminated materials). Overremoval increases the volume of waste and therefore the costs associated with disposal. Integrating technologies would facilitate the removal of only contaminated concrete and reduce the total volume of radioactive waste, which would be disposed of. This would eventually ensure better productivity and time savings. This project presents a general procedure to integrate the above-mentioned technologies in the form of the Technology Integration Module (TIM) along with combination lists of commercially available decontamination and characterization technologies. The scope of the project has also

DEACTIVATION AND DECOMMISSIONING (D AND D) TECHNOLOGY INTEGRATION

International Nuclear Information System (INIS)

Ebadian, M.A.

1999-01-01

As part of the ongoing task of making Deactivation and Decommissioning (D and D) operations more efficient, this subtask has addressed the need to integrate existing characterization technologies with decontamination technologies in order to provide real-time data on the progress of contamination removal. Specifically, technologies associated with concrete decontamination and/or removal have been examined with the goal of integrating existing technologies and commercializing the resulting hybrid. The Department of Energy (DOE) has estimated that 23 million cubic meters of concrete will require disposition as 1200 buildings undergo the D and D process. All concrete removal to be performed will also necessitate extensive use of characterization techniques. The in-process characterization presents the most potential for improvement and cost-savings as compared to other types. Current methods for in-process characterization usually require cessation of work to allow for radiation surveys to assess the rate of decontamination. Combining together decontamination and characterization technologies would allow for in-process evaluation of decontamination efforts. Since the present methods do not use in-process evaluations for the progress of decontamination, they may allow for ''overremoval'' of materials (removal of contaminated along with non-contaminated materials). Overremoval increases the volume of waste and therefore the costs associated with disposal. Integrating technologies would facilitate the removal of only contaminated concrete and reduce the total volume of radioactive waste, which would be disposed of. This would eventually ensure better productivity and time savings. This project presents a general procedure to integrate the above-mentioned technologies in the form of the Technology Integration Module (TIM) along with combination lists of commercially available decontamination and characterization technologies. The scope of the project has also been

Proceedings of the Technical Forum (3rd) on the F-16 MIL-STD-1750A Microprocessor and the F-16 MIL-STD-1589B Compiler Held at Wright-Patterson AFB, OH on May 5-6, 1982. Volume 1. Papers,

Science.gov (United States)

1982-05-06

BUS MKS Fucioa Diagram ~ALAOAR *RSAU TT E E 0E U D*iQ MKSXQ16 Microinstruction Word 1 ~ ~5 .6 a7 . 6 1 1,I 1,. 151li "" SP*D ACCA CONTROL JASNTJ EX...result CALLSF 4F FA Call with ID in register GETSID 4F F9 Get re-time ID of function Data Forwarding FWD 4F F6 Forward integer DFWD 4F F5 Forward

Characterization, Monitoring and Sensor Technology Integrated Program

International Nuclear Information System (INIS)

1993-01-01

This booklet contains summary sheets that describe FY 1993 characterization, monitoring, and sensor technology (CMST) development projects. Currently, 32 projects are funded, 22 through the OTD Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP), 8 through the OTD Program Research and Development Announcement (PRDA) activity managed by the Morgantown Energy Technology Center (METC), and 2 through Interagency Agreements (IAGs). This booklet is not inclusive of those CMST projects which are funded through Integrated Demonstrations (IDs) and other Integrated Programs (IPs). The projects are in six areas: Expedited Site Characterization; Contaminants in Soils and Groundwater; Geophysical and Hydrogeological Measurements; Mixed Wastes in Drums, Burial Grounds, and USTs; Remediation, D ampersand D, and Waste Process Monitoring; and Performance Specifications and Program Support. A task description, technology needs, accomplishments and technology transfer information is given for each project

RSS SSMIS OCEAN PRODUCT GRIDS DAILY FROM DMSP F16 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSMIS Ocean Product Grids Daily from DMSP F16 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

The Role of 18F-FDG PET/CT Integrated Imaging in Distinguishing Malignant from Benign Pleural Effusion

Science.gov (United States)

Sun, Yajuan; Yu, Hongjuan; Ma, Jingquan

2016-01-01

Objective The aim of our study was to evaluate the role of 18F-FDG PET/CT integrated imaging in differentiating malignant from benign pleural effusion. Methods A total of 176 patients with pleural effusion who underwent 18F-FDG PET/CT examination to differentiate malignancy from benignancy were retrospectively researched. The images of CT imaging, 18F-FDG PET imaging and 18F-FDG PET/CT integrated imaging were visually analyzed. The suspected malignant effusion was characterized by the presence of nodular or irregular pleural thickening on CT imaging. Whereas on PET imaging, pleural 18F-FDG uptake higher than mediastinal activity was interpreted as malignant effusion. Images of 18F-FDG PET/CT integrated imaging were interpreted by combining the morphologic feature of pleura on CT imaging with the degree and form of pleural 18F-FDG uptake on PET imaging. Results One hundred and eight patients had malignant effusion, including 86 with pleural metastasis and 22 with pleural mesothelioma, whereas 68 patients had benign effusion. The sensitivities of CT imaging, 18F-FDG PET imaging and 18F-FDG PET/CT integrated imaging in detecting malignant effusion were 75.0%, 91.7% and 93.5%, respectively, which were 69.8%, 91.9% and 93.0% in distinguishing metastatic effusion. The sensitivity of 18F-FDG PET/CT integrated imaging in detecting malignant effusion was higher than that of CT imaging (p = 0.000). For metastatic effusion, 18F-FDG PET imaging had higher sensitivity (p = 0.000) and better diagnostic consistency with 18F-FDG PET/CT integrated imaging compared with CT imaging (Kappa = 0.917 and Kappa = 0.295, respectively). The specificities of CT imaging, 18F-FDG PET imaging and 18F-FDG PET/CT integrated imaging were 94.1%, 63.2% and 92.6% in detecting benign effusion. The specificities of CT imaging and 18F-FDG PET/CT integrated imaging were higher than that of 18F-FDG PET imaging (p = 0.000 and p = 0.000, respectively), and CT imaging had better diagnostic consistency with

The Role of 18F-FDG PET/CT Integrated Imaging in Distinguishing Malignant from Benign Pleural Effusion.

Science.gov (United States)

Sun, Yajuan; Yu, Hongjuan; Ma, Jingquan; Lu, Peiou

2016-01-01

The aim of our study was to evaluate the role of 18F-FDG PET/CT integrated imaging in differentiating malignant from benign pleural effusion. A total of 176 patients with pleural effusion who underwent 18F-FDG PET/CT examination to differentiate malignancy from benignancy were retrospectively researched. The images of CT imaging, 18F-FDG PET imaging and 18F-FDG PET/CT integrated imaging were visually analyzed. The suspected malignant effusion was characterized by the presence of nodular or irregular pleural thickening on CT imaging. Whereas on PET imaging, pleural 18F-FDG uptake higher than mediastinal activity was interpreted as malignant effusion. Images of 18F-FDG PET/CT integrated imaging were interpreted by combining the morphologic feature of pleura on CT imaging with the degree and form of pleural 18F-FDG uptake on PET imaging. One hundred and eight patients had malignant effusion, including 86 with pleural metastasis and 22 with pleural mesothelioma, whereas 68 patients had benign effusion. The sensitivities of CT imaging, 18F-FDG PET imaging and 18F-FDG PET/CT integrated imaging in detecting malignant effusion were 75.0%, 91.7% and 93.5%, respectively, which were 69.8%, 91.9% and 93.0% in distinguishing metastatic effusion. The sensitivity of 18F-FDG PET/CT integrated imaging in detecting malignant effusion was higher than that of CT imaging (p = 0.000). For metastatic effusion, 18F-FDG PET imaging had higher sensitivity (p = 0.000) and better diagnostic consistency with 18F-FDG PET/CT integrated imaging compared with CT imaging (Kappa = 0.917 and Kappa = 0.295, respectively). The specificities of CT imaging, 18F-FDG PET imaging and 18F-FDG PET/CT integrated imaging were 94.1%, 63.2% and 92.6% in detecting benign effusion. The specificities of CT imaging and 18F-FDG PET/CT integrated imaging were higher than that of 18F-FDG PET imaging (p = 0.000 and p = 0.000, respectively), and CT imaging had better diagnostic consistency with 18F-FDG PET/CT integrated

CoPc and CoPcF16 on gold: Site-specific charge-transfer processes

Directory of Open Access Journals (Sweden)

Fotini Petraki

2014-04-01

Full Text Available Interface properties of cobalt(II phthalocyanine (CoPc and cobalt(II hexadecafluoro-phthalocyanine (CoPcF16 to gold are investigated by photo-excited electron spectroscopies (X-ray photoemission spectroscopy (XPS, ultraviolet photoemission spectroscopy (UPS and X-ray excited Auger electron spectroscopy (XAES. It is shown that a bidirectional charge transfer determines the interface energetics for CoPc and CoPcF16 on Au. Combined XPS and XAES measurements allow for the separation of chemical shifts based on different local charges at the considered atom caused by polarization effects. This facilitates a detailed discussion of energetic shifts of core level spectra. The data allow the discussion of site-specific charge-transfer processes.

Inhibition of ERK1/2 or AKT Activity Equally Enhances Radiation Sensitization in B16F10 Cells

Science.gov (United States)

Kalal, Bhuvanesh Sukhlal; Fathima, Faraz; Pai, Vinitha Ramanath; Sanjeev, Ganesh; Krishna, Chilakapati Murali; Upadhya, Dinesh

2018-01-01

Background The aim of the study was to evaluate the radiation sensitizing ability of ERK1/2, PI3K-AKT and JNK inhibitors in highly radiation resistant and metastatic B16F10 cells which carry wild-type Ras and Braf. Methods Mouse melanoma cell line B16F10 was exposed to 1.0, 2.0 and 3.0 Gy of electron beam radiation. Phosphorylated ERK1/2, AKT and JNK levels were estimated by ELISA. Cells were exposed to 2.0 and 3.0 Gy of radiation with or without prior pharmacological inhibition of ERK1/2, AKT as well as JNK pathways. Cell death induced by radiation as well as upon inhibition of these pathways was measured by TUNEL assay using flow cytometry. Results Exposure of B16F10 cells to 1.0, 2.0 and 3.0 Gy of electron beam irradiation triggered an increase in all the three phosphorylated proteins compared to sham-treated and control groups. B16F10 cells pre-treated with either ERK1/2 or AKT inhibitors equally enhanced radiation-induced cell death at 2.0 as well as 3.0 Gy (P < 0.001), while inhibition of JNK pathway increased radiation-induced cell death to a lesser extent. Interestingly combined inhibition of ERK1/2 or AKT pathways did not show additional cell death compared to individual ERK1/2 or AKT inhibition. This indicates that ERK1/2 or AKT mediates radiation resistance through common downstream molecules in B16F10 cells. Conclusions Even without activating mutations in Ras or Braf genes, ERK1/2 and AKT play a critical role in B16F10 cell survival upon radiation exposure and possibly act through common downstream effector/s. PMID:29581812

Stress hormones promote growth of B16-F10 melanoma metastases: an interleukin 6- and glutathione-dependent mechanism

OpenAIRE

Valles, Soraya L; Benlloch, Mar?a; Rodriguez, Mar?a L; Mena, Salvador; Pellicer, Jos? A; Asensi, Miguel; Obrador, Elena; Estrela, Jos? M

2013-01-01

[EN] Background: Interleukin (IL)-6 (mainly of tumor origin) activates glutathione (GSH) release from hepatocytes and its interorgan transport to B16-F10 melanoma metastatic foci. We studied if this capacity to overproduce IL-6 is regulated by cancer cell-independent mechanisms. Methods: Murine B16-F10 melanoma cells were cultured, transfected with red fluorescent protein, injected i.v. into syngenic C57BL/6J mice to generate lung and liver metastases, and isolated from metastatic f...

Tenured Teachers & Technology Integration in the Classroom

Science.gov (United States)

Cox, Jerad

2013-01-01

This article explores teachers' technology integration in the classroom through 2 means: 1) what researchers are saying about emerging trends and best practices as well as, 2) the author's research assignment regarding the technology integration experiences of longer tenured teachers. More tenured teachers are different than their younger…

Integrating Technology: The Principals' Role and Effect

Science.gov (United States)

Machado, Lucas J.; Chung, Chia-Jung

2015-01-01

There are many factors that influence technology integration in the classroom such as teacher willingness, availability of hardware, and professional development of staff. Taking into account these elements, this paper describes research on technology integration with a focus on principals' attitudes. The role of the principal in classroom…

New Structure for a Six-Port Reflectometer in Monolithic Microwave Integrated-Circuit Technology

OpenAIRE

Wiedmann , Frank; Huyart , Bernard; Bergeault , Eric; Jallet , Louis

1997-01-01

International audience; This paper presents a new structure for a six-port reflectometer which due to its simplicity can be implemented very easily in monolithic microwave integrated-circuit (MMIC) technology. It uses nonmatched diode detectors with a high input impedance which are placed around a phase shifter in conjunction with a power divider for the reference detector. The circuit has been fabricated using the F20 GaAs process of the GEC–Marconi foundry and operates between 1.3 GHz and 3...

Clinical case in digital technology for nursing students' learning: An integrative review.

Science.gov (United States)

Hara, Cristina Yuri Nakata; Aredes, Natália Del Angelo; Fonseca, Luciana Mara Monti; Silveira, Renata Cristina de Campos Pereira; Camargo, Rosangela Andrade Aukar; de Goes, Fernanda Santos Nogueira

2016-03-01

This review aimed to analyze the available evidences in literature about clinical case studies inserted in digital technologies for nursing education, characterizing the technology resources and cognitive, procedural and attitudinal learnings. Integrative review of literature with the following steps: development of the research problem, data collection, data extraction and critic evaluation, data analysis and interpretation and presentation of results. The research question was: how does the clinical case study inserted in educational digital technology collaborate for cognitive, attitudinal and procedural learning of nursing students? data bases LILACS, PUBMED, CINAHL and Scopus. the search resulted in 437 studies: 136 from LILACS, 122 from PUBMED, 104 from Scopus and 75 from CINAHL. Of these, 143 did not meet the including criteria, 93 were duplicated and four studies were unavailable. After analyzing all abstracts based on inclusion and exclusion criteria, there were selected 197 studies and after full text analysis the final sample resulted in 21 primary studies. Case study use in educational digital technologies allowed the students to build different types of learning: cognitive learning (n 16 studies), attitudinal learning (n=12 studies) and procedural learning (n=8 studies). It is possible to conclude that case studies can collaborate with the students to develop different learnings which can be built integrate, continuous, informative and formative, aiming integral formation and aligned to policies of formation in nursing, both national and international. Copyright © 2015 Elsevier Ltd. All rights reserved.

Breaking E8 to SO(16) in M-theory and F-theory

International Nuclear Information System (INIS)

Aldabe, F.

1998-01-01

M-theory on an 11-dimensional manifold with a boundary must have E 8 gauge groups at each boundary in order to cancel anomalies. The type IA supergravity must have SO(16) gauge group at each boundary in order to be a consistent theory. The latter action can be obtained from the former one via dimensional reduction. Here we make use of the current algebra of the open membrane which couples to the former action to explain why the gauge group E 8 breaks down to SO(16) in going from M-theory to type IA supergravity. We also use the same current algebra to explain why F-theory has an E 8 x E 8 gauge group in its strong coupling limit while it has an SO(16) x SO(16) gauge group in its weak coupling limit. (orig.)

Novel (1E,3E,5E-1,6-bis(Substituted phenylhexa-1,3,5-triene Analogs Inhibit Melanogenesis in B16F10 Cells and Zebrafish

Directory of Open Access Journals (Sweden)

Jisun Oh

2018-04-01

Full Text Available The present study aimed to evaluate the anti-melanogenic activity of 1,6-diphenyl-1,3,5-hexatriene and its derivatives in B16F10 murine melanoma cells and zebrafish embryos. Twenty five (1E,3E,5E-1,6-bis(substituted phenylhexa-1,3,5-triene analogs were synthesized and their non-cytotoxic effects were predictively analyzed using three-dimensional quantitative structure-activity relationship approach. Inhibitory activities of these synthetic compounds against melanin synthesis were determined by evaluating melanin content and melanogenic regulatory enzyme expression in B16F10 cells. The anti-melanogenic activity was verified by observing body pigmentation in zebrafishes treated with these compounds. Compound #2, #4, and #6 effectively decreased melanogenesis induced by α-melanocyte-stimulating hormone. In particular, compound #2 remarkably lowered the mRNA and protein expression levels of microphthalmia-associated transcription factor (MITF, tyrosinase (TYR, tyrosinase-related protein 1 (TYRP1, and TYRP2 in B16F10 cells and substantially reduced skin pigmentation in the developed larvae of zebrafish. These findings suggest that compound #2 may be used as an anti-melanogenic agent for cosmetic purpose.

High-Throughput Multiple Dies-to-Wafer Bonding Technology and III/V-on-Si Hybrid Lasers for Heterogeneous Integration of Optoelectronic Integrated Circuits

Directory of Open Access Journals (Sweden)

Xianshu eLuo

2015-04-01

Full Text Available Integrated optical light source on silicon is one of the key building blocks for optical interconnect technology. Great research efforts have been devoting worldwide to explore various approaches to integrate optical light source onto the silicon substrate. The achievements so far include the successful demonstration of III/V-on-Si hybrid lasers through III/V-gain material to silicon wafer bonding technology. However, for potential large-scale integration, leveraging on mature silicon complementary metal oxide semiconductor (CMOS fabrication technology and infrastructure, more effective bonding scheme with high bonding yield is in great demand considering manufacturing needs. In this paper, we propose and demonstrate a high-throughput multiple dies-to-wafer (D2W bonding technology which is then applied for the demonstration of hybrid silicon lasers. By temporarily bonding III/V dies to a handle silicon wafer for simultaneous batch processing, it is expected to bond unlimited III/V dies to silicon device wafer with high yield. As proof-of-concept, more than 100 III/V dies bonding to 200 mm silicon wafer is demonstrated. The high performance of the bonding interface is examined with various characterization techniques. Repeatable demonstrations of 16-III/V-die bonding to pre-patterned 200 mm silicon wafers have been performed for various hybrid silicon lasers, in which device library including Fabry-Perot (FP laser, lateral-coupled distributed feedback (LC-DFB laser with side wall grating, and mode-locked laser (MLL. From these results, the presented multiple D2W bonding technology can be a key enabler towards the large-scale heterogeneous integration of optoelectronic integrated circuits (H-OEIC.

Factors That Influence Technology Integration in the Classroom

Science.gov (United States)

Montgomery, Maureen C.

2017-01-01

Education is one area where the use of technology has had great impact on student learning. The integration of technology in teaching and learning can significantly influence the outcome of education in the classroom. However, there are a myriad of factors that influence technology integration in the classroom. The purpose of this study was to…

Integrating Information & Communications Technologies into the Classroom

Science.gov (United States)

Tomei, Lawrence, Ed.

2007-01-01

"Integrating Information & Communications Technologies Into the Classroom" examines topics critical to business, computer science, and information technology education, such as: school improvement and reform, standards-based technology education programs, data-driven decision making, and strategic technology education planning. This book also…

Integrated Magnetic MEMS Relays: Status of the Technology

Directory of Open Access Journals (Sweden)

Giuseppe Schiavone

2014-08-01

Full Text Available The development and application of magnetic technologies employing microfabricated magnetic structures for the production of switching components has generated enormous interest in the scientific and industrial communities over the last decade. Magnetic actuation offers many benefits when compared to other schemes for microelectromechanical systems (MEMS, including the generation of forces that have higher magnitude and longer range. Magnetic actuation can be achieved using different excitation sources, which create challenges related to the integration with other technologies, such as CMOS (Complementary Metal Oxide Semiconductor, and the requirement to reduce power consumption. Novel designs and technologies are therefore sought to enable the use of magnetic switching architectures in integrated MEMS devices, without incurring excessive energy consumption. This article reviews the status of magnetic MEMS technology and presents devices recently developed by various research groups, with key focuses on integrability and effective power management, in addition to the ability to integrate the technology with other microelectronic fabrication processes.

Technological Integration of Acquisitions in Digital Industries

DEFF Research Database (Denmark)

Henningsson, Stefan; Toppenberg, Gustav

2015-01-01

providers to extend the platform core and to derive network effects by consolidating platform user groups, and (b) complement providers to create monopoly positions for the complements and for innovation complementarity. To enable these acquisition benefits, acquirers face technological integration...... challenges in process and product integration. Through a case study of Network Solutions Corp. (NSC), a Fortune 500 company that has acquired more than 175 business units, we develop four propositions explaining how the benefits of platform core and complement acquisitions are differently contingent......Acquisitions have become essential tools to retain the technological edge in digital industries. This paper analyses the technological integration challenges in such acquisitions. Acquirers in digital industries are typically platform leaders in platform markets. They acquire (a) other platform...

Supporting learner-centered technology integration through situated mentoring

Science.gov (United States)

Rosenberg, Marian Goode

Situated mentoring was used as a professional development method to help 11 high school science teachers integrate learner-centered technology. The teachers' learner-centered technology beliefs and practices as well as their perception of barriers to learner-centered technology integration were explored before and after participating in the mentoring program. In addition, the participants' thoughts about the effectiveness of various components of the mentoring program were analyzed along with the mentor's observations of their practices. Situated mentoring can be effective for supporting learner-centered technology integration, in particular decreasing the barriers teachers experience. Goal setting, collaborative planning, reflection, and onsite just-in-time support were thought to be the most valuable components of the mentoring program.

Information Integration Technology Demonstration (IITD)

National Research Council Canada - National Science Library

Loe, Richard

2001-01-01

The objectives of the Information Integration Technology Demonstration (IITD) were to investigate, design a software architecture and demonstrate a capability to display intelligence data from multiple disciplines...

25 CFR 542.16 - What are the minimum internal control standards for information technology?

Science.gov (United States)

2010-04-01

... information technology? 542.16 Section 542.16 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE... standards for information technology? Link to an amendment published at 73 FR 60498, Oct. 10, 2008. This... adequately segregated and monitored to prevent error in general information technology procedures to go...

MRI study of the morphometry of the cervical musculature in F-16 pilots

NARCIS (Netherlands)

de Loose, Veerle; van den Oord, Marieke; Keser, Ilke; Burnotte, Frédéric; van Tiggelen, Damien; Dumarey, Alexandre; Cagnie, Barbara; Witvrouw, Erik; Danneels, Lieven

2009-01-01

INTRODUCTION: In fighter pilots neck muscle strengthening exercises are often recommended to protect the neck against pathologies. The aim of the current study was to compare the relative cross-sectional area (rCSA) and muscle:fat ratio of the cervical musculature of F-16 pilots experiencing neck

Developing Pre-service Teachers' Technology Integration ...

African Journals Online (AJOL)

Developing Pre-service Teachers' Technology Integration Competencies in Science and Mathematics Teaching: Experiences from Tanzania and Uganda. ... This study investigated the ICT integration practices in pre-service teacher education in the School of Education at Makerere University (College of Education and ...

Organizational Culture: Technology Integration. Review of Literature and Data Gathering

Science.gov (United States)

Simpson, Selena E.

2008-01-01

Background: Communities of practice and technology integration within such communities requires much attention in the future of education and developing organizations. Purpose: To examine the effectiveness of technology integration and how communities of practice plays a role in the successful implementation of technology integration for teacher…

The relationship between technology leadership roles and profiles of school principals and technology integration in primary school classrooms

Directory of Open Access Journals (Sweden)

Mustafa SAMANCIOĞLU

2015-12-01

Full Text Available The purpose of this study was to investigate the relationship between technology leadership behaviors of school principals and teachers’ level of technology integration, and to determine technology leadership profiles based on teacher views and examine their association with technology integration. The researchers administered two questionnaires to 352 teachers working at sixteen primary schools in a large city in southeastern Turkey. The results revealed a positive, but weak relationship between technology leadership and technology integration. Furthermore, it was concluded that there were positive but weak relationships among technology integration and human centeredness, communication and collaboration, vision and support sub-dimensions of technology leadership. Two technology leadership profiles (high-TLP=65.6% and low-TLP=34.4% were constructed as a result of cluster analysis. A statistically significant difference was detected between teachers’ technology integration perceptions which were categorized into two profiles. The paper concludes by suggestions for implications to strengthen the link between technology leadership and technology integration.

Wearable Technology

Science.gov (United States)

Watson, Amanda

2013-01-01

Wearable technology projects, to be useful, in the future, must be seamlessly integrated with the Flight Deck of the Future (F.F). The lab contains mockups of space vehicle cockpits, habitat living quarters, and workstations equipped with novel user interfaces. The Flight Deck of the Future is one element of the Integrated Power, Avionics, and Software (IPAS) facility, which, to a large extent, manages the F.F network and data systems. To date, integration with the Flight Deck of the Future has been limited by a lack of tools and understanding of the Flight Deck of the Future data handling systems. To remedy this problem it will be necessary to learn how data is managed in the Flight Deck of the Future and to develop tools or interfaces that enable easy integration of WEAR Lab and EV3 products into the Flight Deck of the Future mockups. This capability is critical to future prototype integration, evaluation, and demonstration. This will provide the ability for WEAR Lab products, EV3 human interface prototypes, and technologies from other JSC organizations to be evaluated and tested while in the Flight Deck of the Future. All WEAR Lab products must be integrated with the interface that will connect them to the Flight Deck of the Future. The WEAR Lab products will primarily be programmed in Arduino. Arduino will be used for the development of wearable controls and a tactile communication garment. Arduino will also be used in creating wearable methane detection and warning system.

Integrating Technology Tools for Students Struggling with Written Language

Science.gov (United States)

Fedora, Pledger

2015-01-01

This exploratory study was designed to assess the experience of preservice teachers when integrating written language technology and their likelihood of applying that technology in their future classrooms. Results suggest that after experiencing technology integration, preservice teachers are more likely to use it in their future teaching.

The OsO(3)F(+) and mu-F(OsO(3)F)(2)(+) cations: their syntheses and study by Raman and (19)F NMR spectroscopy and electron structure calculations and X-ray crystal structures of [OsO(3)F][PnF(6)] (Pn = As, Sb), [OsO(3)F][HF](2)[AsF(6)], [OsO(3)F][HF][SbF(6)], and [OsO(3)F][Sb(3)F(16)].

Science.gov (United States)

Gerken, Michael; Dixon, David A; Schrobilgen, Gary J

2002-01-28

The fluoride ion donor properties of OsO(3)F(2) have been investigated. The salts [OsO(3)F][AsF(6)], [OsO(3)F][HF](2)[AsF(6)], mu-F(OsO(3)F)(2)[AsF(6)], [OsO(3)F][HF](2)[SbF(6)], and [OsO(3)F][HF][SbF(6)] have been prepared by reaction of OsO(3)F(2) with AsF(5) and SbF(5) in HF solvent and have been characterized in the solid state by Raman spectroscopy. The single-crystal X-ray diffraction studies of [OsO(3)F][AsF(6)] (P2(1)/n, a = 7.0001(11) A, c = 8.8629(13) A, beta = 92.270(7) degrees, Z = 4, and R(1) = 0.0401 at -126 degrees C), [OsO(3)F][SbF(6)] (P2(1)/c, a = 5.4772(14) A, b = 10.115(3) A, c = 12.234(3) A, beta = 99.321(5) degrees, Z = 4, and R(1) = 0.0325 at -173 degrees C), [OsO(3)F][HF](2)[AsF(6)] (P2(1)/n, a = 5.1491(9) A, b = 8.129(2) A, c = 19.636(7) A, beta = 95.099(7) degrees, Z = 4, and R(1) = 0.0348 at -117 degrees C), and [OsO(3)F][HF][SbF(6)] (Pc, a = 5.244(4) A, b = 9.646(6) A, c = 15.269(10) A, beta = 97.154(13) degrees, Z = 4, and R(1) = 0.0558 at -133 degrees C) have shown that the OsO(3)F(+) cations exhibit strong contacts to the anions and HF solvent molecules giving rise to cyclic, dimeric structures in which the osmium atoms have coordination numbers of 6. The reaction of OsO(3)F(2) with neat SbF(5) yielded [OsO(3)F][Sb(3)F(16)], which has been characterized by (19)F NMR spectroscopy in SbF(5) and SO(2)ClF solvents and by Raman spectroscopy and single-crystal X-ray diffraction in the solid state (P4(1)m, a = 10.076(6) A, c = 7.585(8) A, Z = 2, and R(1) = 0.0858 at -113 degrees C). The weak fluoride ion basicity of the Sb(3)F(16)(-) anion resulted in an OsO(3)F(+) cation (C(3)(v) point symmetry) that is well isolated from the anion and in which the osmium is four-coordinate. The geometrical parameters and vibrational frequencies of OsO(3)F(+), ReO(3)F, mu-F(OsO(3)F)(2)(+), (FO(3)Os--FPnF(5))(2), and (FO(3)Os--(HF)(2)--FPnF(5))(2) (Pn = As, Sb) have been calculated using density functional theory methods.

The Impact of Technology Integration through a Transformative Approach

Science.gov (United States)

Cubillos, Jo Ann

2013-01-01

The integration of technology into classroom instruction in K-12 schools remains problematic. The problems associated with this integration are troubling, as technology integration may change a teacher's pedagogy toward more innovative approaches that increase student achievement. The purpose of this study was to document teachers' experiences as…

Mapping of carbonic anhydrase and estrone sulphatase in rat brain using 16-α-[18F]fluoroestradiol-3,17-β-disulphamate ([18F]FESDS)

International Nuclear Information System (INIS)

Rodig, H.; Brust, P.; Bergmann, R.; Roemer, J.; Fuechtner, F.; Steinbach, J.; Kasch, H.

2002-01-01

16α-[ 18 F]Fluoroestradiol-3,17β-disulphamate ([ 18 F]FESDS) was recently found to display affinities to carbonic anhydrase (CA) and estrone sulphatase (ES), enzymes which are expressed in the CNS and probably play a regulatory role in various brain diseases. In this study the radioligand was used to provide quantitative data on the regional distribution of these enzymes in the rat brain. (orig.)

Determination of tea fluorine concentration with 19F(p, αγ)16O prompt nuclear reaction analysis

International Nuclear Information System (INIS)

Liang Daihua; Shen Guantao; Li Deyi; Wu Junheng

1987-01-01

Experiments of 19 F(p, αγ) 16 O prompt nuclear reaction analyses of tea F contents were performed on a Cockroft-Walton accelerator. The principle and apparatus are described. More than 150 varieties tea samples were examined. Results show that for the same variety of tea samples, the higher the grade of the tea, the higher the F concentration it contains, and for different varieties, the better the tea, the lower the F concentration of the tea

A Synthesis of Hybrid RANS/LES CFD Results for F-16XL Aircraft Aerodynamics

Science.gov (United States)

Luckring, James M.; Park, Michael A.; Hitzel, Stephan M.; Jirasek, Adam; Lofthouse, Andrew J.; Morton, Scott A.; McDaniel, David R.; Rizzi, Arthur M.

2015-01-01

A synthesis is presented of recent numerical predictions for the F-16XL aircraft flow fields and aerodynamics. The computational results were all performed with hybrid RANS/LES formulations, with an emphasis on unsteady flows and subsequent aerodynamics, and results from five computational methods are included. The work was focused on one particular low-speed, high angle-of-attack flight test condition, and comparisons against flight-test data are included. This work represents the third coordinated effort using the F-16XL aircraft, and a unique flight-test data set, to advance our knowledge of slender airframe aerodynamics as well as our capability for predicting these aerodynamics with advanced CFD formulations. The prior efforts were identified as Cranked Arrow Wing Aerodynamics Project International, with the acronyms CAWAPI and CAWAPI-2. All information in this paper is in the public domain.

Integrating technology education concepts into China's educational system

Science.gov (United States)

Yang, Faxian

The problem of this study was to develop a strategy for integrating technology education concepts within the Chinese mathematics and science curricula. The researcher used a case study as the basic methodology. It included three methods for collecting data: literature review, field study in junior and senior secondary schools in America and China, and interviews with experienced educators who were familiar with the status of technology education programs in the selected countries. The data came from the following areas: Japan, Taiwan, the United Kingdom, China, and five states in the United States: Illinois, Iowa, Maryland, Massachusetts, and New York. The researcher summarized each state and country's educational data, identified the advantages and disadvantages of their current technology education program, and identified the major concepts within each program. The process determined that identified concepts would be readily acceptable into the current Chinese educational system. Modernization of, industry, agriculture, science and technology, and defense have been recent objectives of the Chinese government. Therefore, Chinese understanding of technology, or technology education, became important for the country. However, traditional thought and culture curb the implementation of technology education within China's current education system. The proposed solution was to integrate technology education concepts into China's mathematics and science curricula. The purpose of the integration was to put new thoughts and methods into the current educational structure. It was concluded that the proposed model and interventions would allow Chinese educators to carry out the integration into China's education system.

Technology Use in Science Instruction (TUSI): Aligning the Integration of Technology in Science Instruction in Ways Supportive of Science Education Reform

Science.gov (United States)

Campbell, Todd; Abd-Hamid, Nor Hashidah

2013-08-01

This study describes the development of an instrument to investigate the extent to which technology is integrated in science instruction in ways aligned to science reform outlined in standards documents. The instrument was developed by: (a) creating items consistent with the five dimensions identified in science education literature, (b) establishing content validity with both national and international content experts, (c) refining the item pool based on content expert feedback, (d) piloting testing of the instrument, (e) checking statistical reliability and item analysis, and (f) subsequently refining and finalization of the instrument. The TUSI was administered in a field test across eleven classrooms by three observers, with a total of 33 TUSI ratings completed. The finalized instrument was found to have acceptable inter-rater intraclass correlation reliability estimates. After the final stage of development, the TUSI instrument consisted of 26-items separated into the original five categories, which aligned with the exploratory factor analysis clustering of the items. Additionally, concurrent validity of the TUSI was established with the Reformed Teaching Observation Protocol. Finally, a subsequent set of 17 different classrooms were observed during the spring of 2011, and for the 9 classrooms where technology integration was observed, an overall Cronbach alpha reliability coefficient of 0.913 was found. Based on the analyses completed, the TUSI appears to be a useful instrument for measuring how technology is integrated into science classrooms and is seen as one mechanism for measuring the intersection of technological, pedagogical, and content knowledge in science classrooms.

Technology in Education: Technology Integration into the School's Curriculum

Science.gov (United States)

Culver, Bobby L., Jr.

2017-01-01

Integrating technology into the school's curriculum is a very contentious issue. However, it is an important issue that schools need to consider and assess. The purpose of this study was to examine the relationship between K-5th grade teachers' perceptions of proficiency of technology equipment, experience with technology in education, and…

Integrated Micro Product and Technology Development

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

Technology and Environmental Education: An Integrated Curriculum

Science.gov (United States)

Willis, Jana M.; Weiser, Brenda

2005-01-01

Preparing teacher candidates to integrate technology into their future classrooms effectively requires experience in instructional planning that utilizes technology to enhance student learning. Teacher candidates need to work with curriculum that supports a variety of technologies. Using Project Learning Tree and environmental education (EE),…

Risk-Aversion: Understanding Teachers' Resistance to Technology Integration

Science.gov (United States)

Howard, Sarah K.

2013-01-01

Teachers who do not integrate technology are often labelled as "resistant" to change. Yet, considerable uncertainties remain about appropriate uses and actual value of technology in teaching and learning, which can make integration and change seem risky. The purpose of this article is to explore the nature of teachers' analytical and…

Technology Integration Support Levels for In-Service Teachers

Science.gov (United States)

Williams, Mable Evans

2017-01-01

In-service teachers across the globe are expected to integrate technology in their respective instructional content area. The purpose of this qualitative study was to explore the perceptions of in-service teachers concerning building-level support for technology integration. Participants in the study were asked to participate in semi-structured…

Ca2+ signals, cell membrane disintegration, and activation of TMEM16F during necroptosis.

Science.gov (United States)

Ousingsawat, Jiraporn; Cabrita, Inês; Wanitchakool, Podchanart; Sirianant, Lalida; Krautwald, Stefan; Linkermann, Andreas; Schreiber, Rainer; Kunzelmann, Karl

2017-01-01

Activated receptor-interacting protein kinase 3 (RIPK3) and mixed lineage kinase domain like (MLKL) are essential components of the necroptotic pathway. Phosphorylated MLKL (pMLKL) is thought to induce membrane leakage, leading to cell swelling and disintegration of the cell membrane. However, the molecular identity of the necroptotic membrane pore remains unclear, and the role of pMLKL for membrane permeabilization is currently disputed. We observed earlier that the phospholipid scramblase and ion channel TMEM16F/anoctamin 6 cause large membrane currents, cell swelling, and cell death when activated by a strong increase in intracellular Ca 2+ . We, therefore, asked whether TMEM16F is also central to necroptotic cell death and other cellular events during necroptosis. Necroptosis was induced by TNFα, smac mimetic, and Z-VAD (TSZ) in NIH3T3 fibroblasts and the four additional cell lines HT 29 , 16HBE, H441, and L929. Time-dependent changes in intracellular Ca 2+ , cell morphology, and membrane currents were recorded. TSZ induced a small and only transient oscillatory rise in intracellular Ca 2+ , which was paralleled by the activation of outwardly rectifying Cl - currents, which were typical for TMEM16F/ANO6. Ca 2+ oscillations were due to Ca 2+ release from endoplasmic reticulum, and were independent of extracellular Ca 2+ . The initial TSZ-induced cell swelling was followed by cell shrinkage. Using typical channel blockers and siRNA-knockdown, the Cl - currents were shown to be due to the activation of ANO6. However, the knockdown of ANO6 or inhibitors of ANO6 did not inhibit necroptotic cell death. The present data demonstrate the activation of ANO6 during necroptosis, which, however, is not essential for cell death.

Development of the Integrated Information Technology System

National Research Council Canada - National Science Library

2005-01-01

The Integrated Medical Information Technology System (IMITS) Program is focused on implementation of advanced technology solutions that eliminate inefficiencies, increase utilization and improve quality of care for active duty forces...

Teachers' Preparation Needs for Integrating Technology in the Classroom

Science.gov (United States)

Jackson, Barcus C.

2013-01-01

School districts across the country are charged with preparing the next generation for competing in a global economy and have spent billions of dollars on technology acquisition and Internet use. However, teachers do not feel prepared to integrate technology in the classroom. To prepare teachers for technology integration, the most common approach…

Active and Passive Technology Integration: A Novel Approach for Managing Technology's Influence on Learning Experiences in Context-Aware Learning Spaces

Science.gov (United States)

Laine, Teemu H.; Nygren, Eeva

2016-01-01

Technology integration is the process of overcoming different barriers that hinder efficient utilisation of learning technologies. The authors divide technology integration into two components based on technology's role in the integration process. In active integration, the technology integrates learning resources into a learning space, making it…

MINIMALLY-INVASIVE TUBE THORACOSTOMY MADE EASY WITH A COMBINATION OF THORACIC ULTRASOUND AND SMALL BORE CHEST DRAIN KITS (12F TO 16F USING GUIDEWIRE TECHNIQUE

Directory of Open Access Journals (Sweden)

Venkateswararao

2017-11-01

Full Text Available BACKGROUND Minimally-invasive tube thoracostomy made easy with a combination of thoracic ultrasound and small bore chest drain kits (12F to16F using guidewire technique. The present study is aimed at easy and safe insertion of small bore chest drains (12F to 16F using Seldinger technique under ultrasound guidance with least discomfort to the patient. Large bore chest drains of size >20F using blunt dissection technique is painful, difficult to place in thick chest walls and technically more demanding. Placing the drains blindly basing on chest x-ray image may sometimes injure the underlying lung. MATERIALS AND METHODS Present study included 21 cases, of which 12 cases (57.1% were of pleural effusion and 9 cases (42.8% were of pneumothorax. Thoracic ultrasound was utilised by the operator for all pleural effusions and for those cases of pneumothorax who were on ventilator before tube insertion. Small bore chest drains (12F to 16F designed for guidewire technique were used in the present study. RESULTS Complete and sustainable lung expansion was seen in 19 of 21 cases (90.4%. It failed in remaining 2 cases (9.5% who had complex empyemas and hepatic hydrothorax. Pleurodesis was attempted in 6 cases (28.5% using tetracycline injectable form with success rate of 90%. Patient tolerance was good with numeric pain rating score of 1 to 3 (range 0 to 10; 0 = no pain; 5 = moderate pain; 10 = worst possible pain. CONCLUSION Using small bore chest tubes of sizes 12F to 16F designed for guidewire technique of insertion and utilising thoracic ultrasound, while insertion made the procedure easy and safe, less painful and good tolerance from patient’s point of view. Complete and sustainable lung expansion was seen in 90.4% of cases and highly efficacious for spontaneous and iatrogenic pneumothorax and in noncomplex and malignant pleural effusions. The technique is less demanding and thoracic ultrasound knowledge can be easily learnt and a combination of this

Hinokitiol, a tropolone derivative, inhibits mouse melanoma (B16-F10) cell migration and in vivo tumor formation.

Science.gov (United States)

Huang, Chien-Hsun; Lu, Shing-Hwa; Chang, Chao-Chien; Thomas, Philip Aloysius; Jayakumar, Thanasekaran; Sheu, Joen-Rong

2015-01-05

Invasion and metastasis are the major causes of treatment failure in patients with cancer. Hinokitiol, a natural bioactive compound found in Chamacyparis taiwanensis, has been used in hair tonics, cosmetics, and food as an antimicrobial agent. In this study, we investigated the effects and possible mechanisms of action of hinokitiol on migration by the metastatic melanoma cell line, B16-F10, in which matrix metalloproteinase-1 (MMP-1) is found to be highly- expressed. Treatment with hinokitiol revealed a concentration-dependent inhibition of migration of B16-F10 melanoma cells. Hinokitiol appeared to achieve this effect by reducing the expression of MMP-1 and by suppressing the phosphorylation of mitogen- activated protein kinase (MAPK) signaling molecules such as extracellular signal-regulated kinase (ERK) 1/2, p38 MAPK and c-Jun N-terminal kinases (JNK). On the other hand, hinokitiol treatment reversed IκB-α degradation and inhibited the phosphorylation of p65 nuclear factor kappa B (NF-κB) and cJun in B16-F10 cells. In addition, hinokitiol suppressed the translocation of p65 NF-κB from the cytosol to the nucleus, suggesting reduced NF-κB activation. Consistent with these in vitro findings, our in vivo study demonstrated that hinokitiol treatment significantly reduced the total number of mouse lung metastatic nodules and improved histological alterations in B16-F10 injected C57BL/6 mice. These findings suggest that treatment of B16-F10 cells with hinokitiol significantly inhibits metastasis, possibly by blocking MMP-1 activation, MAPK signaling pathways and inhibition of the transcription factors, NF-κB and c-Jun, involved in cancer cell migration. These results may accelerate the development of novel therapeutic agents for the treatment of malignant cancers. Copyright © 2014 Elsevier B.V. All rights reserved.

Sustaining Integrated Technology in Undergraduate Mathematics

Science.gov (United States)

Oates, Greg

2011-01-01

The effective integration of technology into the teaching and learning of mathematics remains one of the critical challenges facing contemporary tertiary mathematics. This article reports on some significant findings of a wider study investigating the use of technology in undergraduate mathematics. It first discusses a taxonomy developed to…

Integrating neural network technology and noise analysis

International Nuclear Information System (INIS)

Uhrig, R.E.; Oak Ridge National Lab., TN

1995-01-01

The integrated use of neural network and noise analysis technologies offers advantages not available by the use of either technology alone. The application of neural network technology to noise analysis offers an opportunity to expand the scope of problems where noise analysis is useful and unique ways in which the integration of these technologies can be used productively. The two-sensor technique, in which the responses of two sensors to an unknown driving source are related, is used to demonstration such integration. The relationship between power spectral densities (PSDs) of accelerometer signals is derived theoretically using noise analysis to demonstrate its uniqueness. This relationship is modeled from experimental data using a neural network when the system is working properly, and the actual PSD of one sensor is compared with the PSD of that sensor predicted by the neural network using the PSD of the other sensor as an input. A significant deviation between the actual and predicted PSDs indicate that system is changing (i.e., failing). Experiments carried out on check values and bearings illustrate the usefulness of the methodology developed. (Author)

Oxygen mask fit analysis in F-16 fighter pilots using 3D imaging

NARCIS (Netherlands)

Schreinemakers, J.R.C.; Oudenhuijzen, A.J.K.; Amerongen, P.C.G.M. van; Kon, M.

2013-01-01

Background: The majority of Dutch F-16 pilots experience in-flight oxygen mask related nasal discomfort and injury. We aimed to analyze the fit of the oxygen mask. Methods: We successfully scanned 35 pilots with a 3D scanner to measure the distance between the contact area on the nose and the oxygen

Integration of element technology and system supporting thermonuclear fusion

International Nuclear Information System (INIS)

2003-01-01

A special committee for integrated system technology survey on thermonuclear fusion (TNF) was begun on June, 1999, under an aim to generally summarize whole of shapes on technology to realize TNF reactor to summarize present state of every technologies and their positioning in whole of their TNF technology. On a base of survey of these recent informations, this report is comprehensively summarized for an integrated system technology on TNF. It has outlines on magnetic field enclosing method, outlines on inertia enclosing method, element technology supporting TNF, new power generation techniques, and ripple effects on TNF technology. (G.K.)

Radiation effects in semiconductors: technologies for hardened integrated circuits

International Nuclear Information System (INIS)

Charlot, J.M.

1984-01-01

Various technologies are used to manufacture integrated circuits for electronic systems. But for specific applications, including those with radiation environment, it is necessary to choose an appropriate technology or to improve a specific one in order to reach a definite hardening level. The aim of this paper is to present the main effects induced by radiation (neutrons and gamma rays) into the basic semiconductor devices, to explain some physical degradation mechanisms and to propose solutions for hardened integrated circuit fabrication. The analysis involves essentially the monolithic structure of the integrated circuits and the isolation technology of active elements. In conclusion, the advantages of EPIC and SOS technologies are described and the potentialities of new technologies (GaAs and SOI) are presented. (author)

From Technology Teacher to Technology Integration Specialist: Preparing for a Paradigm Shift

Science.gov (United States)

Dalrymple, Jennifer Lynn Penry

2017-01-01

This dissertation examines the effectiveness of a professional development program designed specifically to provide foundational knowledge and skills to Technology Teachers in preparation for a transition to a Technology Integration Specialist position. Specifically, it evaluates the Technology Teachers' changes in knowledge and beliefs as a…

Microwaves integrated circuits: hybrids and monolithics - fabrication technology

International Nuclear Information System (INIS)

Cunha Pinto, J.K. da

1983-01-01

Several types of microwave integrated circuits are presented together with comments about technologies and fabrication processes; advantages and disadvantages in their utilization are analysed. Basic structures, propagation modes, materials used and major steps in the construction of hybrid thin film and monolithic microwave integrated circuits are described. Important technological applications are revised and main activities of the microelectronics lab. of the University of Sao Paulo (Brazil) in the field of hybrid and monolithic microwave integrated circuits are summarized. (C.L.B.) [pt

Educational Technology: A Review of the Integration, Resources, and Effectiveness of Technology in K-12 Classrooms

Directory of Open Access Journals (Sweden)

Adolph Delgado

2015-09-01

Full Text Available There is no questioning that the way people live, interact, communicate, and conduct business is undergoing a profound, rapid change. This change is often referred to as the “digital revolution,” which is the advancement of technology from analog, electronic and mechanical tools to the digital tools available today. Moreover, technology has begun to change education, affecting how students acquire the skill sets needed to prepare for college and a career and how educators integrate digital technological instructional strategies to teach. Numerous studies have been published discussing the barriers of integrating technology, the estimated amount of investment that is needed in order to fully support educational technology, and, of course, the effectiveness of technology in the classroom. As such, this article presents a critical review of the transitions that technology integration has made over the years; the amount of resources and funding that has been allocated to immerse school with technology; and the conflicting results presented on effectiveness of using is technology in education. Through synthesis of selected themes, we found a plethora of technological instructional strategies being used to integrate technology into K-12 classrooms. Also, though there have been large investments made to integrate technology into K-12 classrooms to equip students with the skills needed to prepare for college and a career, the practical use of this investment has not been impressive. Lastly, several meta-analyses showed promising results of effectiveness of technology in the classroom. However, several inherent methodological and study design issues dampen the amount of variance that technology accounts for.

Development of mechanical design technology for integral reactor

Energy Technology Data Exchange (ETDEWEB)

Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Kim, Tae Wan; Jeong, Kyeong Hoon; Lee, Gyu Mahn

1999-03-01

While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose application such as small capacity power generation, co-generation and sea water desalination. With this in mind, an integral reactor SMART is under development. Design concepts, system layout and types of equipment of integral reactor are significantly different from those of loop type reactor. Conceptual design development of mechanical structures of integral reactor SMART is completed through the first stage of the project. Efforts were endeavored for the establishment of design basis and evaluation of applicable codes and standards. Design and functional requirements of major structural components were setup, and three dimensional structural modelling of SMART reactor vessel assembly was prepared. Also, maintenance and repair scheme as well as preliminary fabricability evaluation were carried out. Since small integral reactor technology includes sensitive technologies and know-how's, it is hard to achieve systematic and comprehensive technology transfer from nuclear-advanced countries. Thus, it is necessary to develop the related design technology and to verify the adopted methodologies through test and experiments in order to assure the structural integrity of reactor system. (author)

Development of mechanical design technology for integral reactor

International Nuclear Information System (INIS)

Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Kim, Tae Wan; Jeong, Kyeong Hoon; Lee, Gyu Mahn

1999-03-01

While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose application such as small capacity power generation, co-generation and sea water desalination. With this in mind, an integral reactor SMART is under development. Design concepts, system layout and types of equipment of integral reactor are significantly different from those of loop type reactor. Conceptual design development of mechanical structures of integral reactor SMART is completed through the first stage of the project. Efforts were endeavored for the establishment of design basis and evaluation of applicable codes and standards. Design and functional requirements of major structural components were set up, and three dimensional structural modelling of SMART reactor vessel assembly was prepared. Also, maintenance and repair scheme as well as preliminary fabricability evaluation were carried out. Since small integral reactor technology includes sensitive technologies and know-how's, it is hard to achieve systematic and comprehensive technology transfer from nuclear-advanced countries. Thus, it is necessary to develop the related design technology and to verify the adopted methodologies through test and experiments in order to assure the structural integrity of reactor system. (author)

Pressure-induced magnetic collapse and metallization of TlF e1.6S e2

Science.gov (United States)

Naumov, P. G.; Filsinger, K.; Shylin, S. I.; Barkalov, O. I.; Ksenofontov, V.; Qi, Y.; Palasyuk, T.; Schnelle, W.; Medvedev, S. A.; Greenblatt, M.; Felser, C.

2017-08-01

The crystal structure, magnetic ordering, and electrical resistivity of TlF e1.6S e2 were studied at high pressures. Below ˜7 GPa , TlF e1.6S e2 is an antiferromagnetically ordered semiconductor with a ThC r2S i2 -type structure. The insulator-to-metal transformation observed at a pressure of ˜7 GPa is accompanied by a loss of magnetic ordering and an isostructural phase transition. In the pressure range ˜7.5 -11 GPa a remarkable downturn in resistivity, which resembles a superconducting transition, is observed below 15 K. We discuss this feature as the possible onset of superconductivity originating from a phase separation in a small fraction of the sample in the vicinity of the magnetic transition.

Cab technology integration laboratory demonstration with moving map technology

Science.gov (United States)

2013-03-31

A human performance study was conducted at the John A. Volpe National Transportation Systems Center (Volpe Center) using a locomotive research simulatorthe Cab Technology Integration Laboratory (CTIL)that was acquired by the Federal Railroad Ad...

Digital Technologies Supporting Person-Centered Integrated Care - A Perspective.

Science.gov (United States)

Øvretveit, John

2017-09-25

Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning "digitalisation" of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

Integrating Technology into Peer Leader Responsibilities

Science.gov (United States)

Johnson, Melissa L.

2012-01-01

Technology has become an integral part of landscape of higher education. Students are coming to college with an arsenal of technological tools at their disposal. These tools are being used for informal, everyday communication as well as for formal learning in the classroom. At the same time, higher education is experiencing an increase in peer…

Managing the Technology Acquisition Integration Paradox at SAP

DEFF Research Database (Denmark)

Henningsson, Stefan; Kude, Thomas; Popp, Karl Michael

2016-01-01

rests in ensuring critical speed while not compromising accuracy in the integration process. For SAP, the Product Council became a vital component in its technology acquisition capability that allows the company to retain its technological edge in the hypercompetitive software industry.......In this paper, we report on a novel approach developed by SAP AG, the German enterprise software company, for managing the integration of acquisitions of companies to access innovative technologies and related capabilities: the Product Council approach. The value of the Product Council approach...

Perceptions and Practice: The Relationship between Teacher Perceptions of Technology Use and Level of Classroom Technology Integration

Science.gov (United States)

Sawyer, Laura M.

2017-01-01

This correlational-predictive study investigated the relationship between teacher perceptions of technology use and observed classroom technology integration level using the "Technology Uses and Perceptions Survey" (TUPS) and the "Technology Integration Matrix-Observation" (TIM-O) instruments, developed by the Florida Center…

Preservice and In-Service Teachers' Perceptions toward Technology Benefits and Integration

Science.gov (United States)

Spaulding, Michael

2013-01-01

This study examined preservice teacher attitudes toward and expected technology integration practices as compared to in-service teachers' attitudes toward and actual (self-reported) practice of technology integration. The preservice teachers revealed a greater level of confidence in their ability to integrate technology and more positive beliefs…

Leveraging Technology for Refugee Integration

DEFF Research Database (Denmark)

Abu Jarour, Safa'a; Krasnova, Hanna; Wenninger, Helena

2016-01-01

, especially smartphones, is an important distinction of the current refugees’ crisis. ICT may support integrative efforts undertaken by local authorities and other stakeholders. Nonetheless, the question how ICTs can be applied to support refugees and how detrimental effects for them and the hosting societies...... of ICT use by refugees on an operational level, and how ICT systems should be designed and culturally adapted.......Spurred by the military conflicts, refugees’ crisis has swept Europe by surprise. With a challenge of integrating refugees into hosting societies comes the question about the role that ICTs could play in the ongoing integration efforts. Indeed, unprecedented reliance of refugees on technology...

Design and test results of a low-noise readout integrated circuit for high-energy particle detectors

International Nuclear Information System (INIS)

Zhang Mingming; Chen Zhongjian; Zhang Yacong; Lu Wengao; Ji Lijiu

2010-01-01

A low-noise readout integrated circuit for high-energy particle detector is presented. The noise of charge sensitive amplifier was suppressed by using single-side amplifier and resistors as source degeneration. Continuous-time semi-Gaussian filter is chosen to avoid switch noise. The peaking time of pulse shaper and the gain can be programmed to satisfy multi-application. The readout integrated circuit has been designed and fabricated using a 0.35 μm double-poly triple-metal CMOS technology. Test results show the functions of the readout integrated circuit are correct. The equivalent noise charge with no detector connected is 500-700 e in the typical mode, the gain is tunable within 13-130 mV/fC and the peaking time varies from 0.7 to 1.6 μs, in which the average gain is about 20.5 mV/fC, and the linearity reaches 99.2%. (authors)

Integrating Adult Learning and Technologies for Effective Education: Strategic Approaches

Science.gov (United States)

Wang, Victor C. X.

2010-01-01

As adult learners and educators pioneer the use of technology in the new century, attention has been focused on developing strategic approaches to effectively integrate adult learning and technology in different learning environments. "Integrating Adult Learning and Technologies for Effective Education: Strategic Approaches" provides innovative…

RSS SSMIS OCEAN PRODUCT GRIDS 3-DAY AVERAGE FROM DMSP F16 NETCDF V7

Data.gov (United States)

National Aeronautics and Space Administration — The RSS SSMIS Ocean Product Grids 3-Day Average from DMSP F16 netCDF dataset is part of the collection of Special Sensor Microwave/Imager (SSM/I) and Special Sensor...

Making Technology Ready: Integrated Systems Health Management

Science.gov (United States)

Malin, Jane T.; Oliver, Patrick J.

2007-01-01

This paper identifies work needed by developers to make integrated system health management (ISHM) technology ready and by programs to make mission infrastructure ready for this technology. This paper examines perceptions of ISHM technologies and experience in legacy programs. Study methods included literature review and interviews with representatives of stakeholder groups. Recommendations address 1) development of ISHM technology, 2) development of ISHM engineering processes and methods, and 3) program organization and infrastructure for ISHM technology evolution, infusion and migration.

Technology Integration Coursework and Finding Meaning in Pre-Service Teachers' Reflective Practice

Science.gov (United States)

Kimmons, Royce; Miller, Brant G.; Amador, Julie; Desjardins, Christopher David; Hall, Cassidy

2015-01-01

This study seeks to inform teacher preparation programs regarding technology integration by understanding (1) relationships between tasks with specific technologies and pre-service teachers' critical thinking about technology integration and (2) relationships between how pre-service teachers are critically thinking about technology integration and…

Integrating technologies for scalable ecology and conservation

NARCIS (Netherlands)

Marvin, D.C.; Koh, L.P.; Lynam, A.J.; Wich, S.; Davies, A.B.; Krishnamurthy, R.; Stokes, E.; Starkey, R.; Asner, G.P.

Integration of multiple technologies greatly increases the spatial and temporal scales over which ecological patterns and processes can be studied, and threats to protected ecosystems can be identified and mitigated. A range of technology options relevant to ecologists and conservation practitioners

Radiation effects in semiconductors: technologies for hardened integrated circuits

International Nuclear Information System (INIS)

Charlot, J.M.

1983-09-01

Various technologies are used to manufacture integrated circuits for electronic systems. But for specific applications, including those with radiation environment, it is necessary to choose an appropriate technologie or to improve a specific one in order to reach a definite hardening level. The aim of this paper is to present the main effects induced by radiation (neutrons and gamma rays) into the basic semiconductor devices, to explain some physical degradation mechanisms and to propose solutions for hardened integrated circuit fabrication. The analysis involves essentially the monolithic structure of the integrated circuits and the isolation technology of active elements. In conclusion, the advantages of EPIC and SOS technologies are described and the potentialities of new technologies (GaAs and SOI) are presented

Toward integrated design of waste management technologies

International Nuclear Information System (INIS)

Carnes, S.A.; Wolfe, A.K.

1994-01-01

Implementation of waste management technologies has been hindered by the intervention of diverse interests. Relying on a perceived history of inadequate and improper management, operations, and technological design, critics have stymied the implementation of scientifically and governmentally approved technologies and facilities, leading to a critical shortage of hazardous, mixed, and radioactive waste management capacity. The research and development (R ampersand D) required to identify technologies that are simultaneously (1) scientifically valid, (2) economically sound, and (3) publicly acceptable must necessarily address, in an integrated and interdisciplinary manner, these three criteria and how best to achieve the integration of stakeholders early in the technology implementation process (i.e., R ampersand D, demonstration, and commercialization). The goal of this paper is to initiate an identification of factors likely to render radioactive and hazardous waste management technologies publicly acceptable and to provide guidance on how technological R ampersand D might be revised to enhance the acceptability of alternative waste management technologies. Principal among these factors are the equitable distribution of costs, risks, and benefits of waste management policies and technologies, the equitable distribution of authority for making waste management policy and selecting technologies for implementation, and the equitable distribution of responsibility for resolving waste management problems. Stakeholder participation in assessing the likely distribution of these factors and mitigative mechanisms to enhance their equitable distribution, together with stakeholder participation in policy and technology R ampersand D, as informed by stakeholder assessments, should enhance the identification of acceptable policies and technologies

Division algebras with integral elements

International Nuclear Information System (INIS)

Koca, M.; Ozdes, N.

1988-06-01

Pairing two elements of a given division algebra furnished with a multiplication rule leads to an algebra of higher dimension restricted by 8. This fact is used to obtain the roots of SO(4) and SP(2) from the roots ±1 of SU(2) and the weights ±1/2 of its spinor representation. The root lattice of SO(8) described by 24 integral quaternions are obtained by pairing two sets of roots of SP(2). The root system of F 4 is constructed in terms of 24 integral and 24 ''half-integral'' quaternions. The root lattice of E 8 expressed as 240 integral octonions are obtained by pairing two sets of roots of F 4 . 24 integral quaternions of SO(8) forming a discrete subgroup of SU(2) is shown to be the automorphism group of the root lattices of SO(8), F 4 and E 8 . The roots of maximal subgroups SO(16), E 7 XSU(2), E 6 XSU(3), SU(9) and SU(5)XSU(5) of E 8 are identified with a simple method. Subsets of the discrete subgroup of SU(2) leaving maximal subgroups of E 8 are obtained. Constructions of E 8 root lattice with integral octonions in 7 distinct ways are made. Magic square of integral lattices of Goddard, Nahm, Olive, Ruegg and Schwimmer are derived. Possible physical applications are suggested. (author). 16 refs, 6 figs, 5 tabs

Stress hormones promote growth of B16-F10 melanoma metastases: an interleukin 6- and glutathione-dependent mechanism.

Science.gov (United States)

Valles, Soraya L; Benlloch, María; Rodriguez, María L; Mena, Salvador; Pellicer, José A; Asensi, Miguel; Obrador, Elena; Estrela, José M

2013-03-22

Interleukin (IL)-6 (mainly of tumor origin) activates glutathione (GSH) release from hepatocytes and its interorgan transport to B16-F10 melanoma metastatic foci. We studied if this capacity to overproduce IL-6 is regulated by cancer cell-independent mechanisms. Murine B16-F10 melanoma cells were cultured, transfected with red fluorescent protein, injected i.v. into syngenic C57BL/6J mice to generate lung and liver metastases, and isolated from metastatic foci using high-performance cell sorting. Stress hormones and IL-6 levels were measured by ELISA, and CRH expression in the brain by in situ hybridization. DNA binding activity of NF-κB, CREB, AP-1, and NF-IL-6 was measured using specific transcription factor assay kits. IL-6 expression was measured by RT-PCR, and silencing was achieved by transfection of anti-IL-6 small interfering RNA. GSH was determined by HPLC. Cell death analysis was distinguished using fluorescence microscopy, TUNEL labeling, and flow cytometry techniques. Statistical analyses were performed using Student's t test. Plasma levels of stress-related hormones (adrenocorticotropin hormone, corticosterone, and noradrenaline) increased, following a circadian pattern and as compared to non-tumor controls, in mice bearing B16-F10 lung or liver metastases. Corticosterone and noradrenaline, at pathophysiological levels, increased expression and secretion of IL-6 in B16-F10 cells in vitro. Corticosterone- and noradrenaline-induced transcriptional up-regulation of IL-6 gene involves changes in the DNA binding activity of nuclear factor-κB, cAMP response element-binding protein, activator protein-1, and nuclear factor for IL-6. In vivo inoculation of B16-F10 cells transfected with anti-IL-6-siRNA, treatment with a glucocorticoid receptor blocker (RU-486) or with a β-adrenoceptor blocker (propranolol), increased hepatic GSH whereas decreased plasma IL-6 levels and metastatic growth. Corticosterone, but not NORA, also induced apoptotic cell death in

Analytical applications of 19F (p, αγ)16O reaction

International Nuclear Information System (INIS)

Arias Revollo, F.R.

1977-11-01

The reaction 19 F (p, αγ) 16 O was used to determine fluorine concentration in various substances. A pronounced resonance at E sub(P) = 672 KeV permitted analysis of samples at various depths. Backscattered protons were used to normalize the number of 6,13 and 7,12 MeV gamma rays emitted during sample irradiation. Comparison with gamma/particle ratios from pure substances of know fluorine concentration permits an absolute interpretation of results. The technique was applied to several human and animal tooth samples and fluorine containing minerals. (Author) [pt

InP membrane on silicon integration technology

NARCIS (Netherlands)

Smit, M.K.

2013-01-01

Integration of light sources in silicon photonics is usually done with an active InP-based layer stack on a silicon-based photonic circuit-layer. InP Membrane On Silicon (IMOS) technology integrates all functionality in a single InP-based layer.

Nigerian teachers' perception of barriers to technology integration ...

African Journals Online (AJOL)

This paper documents chemistry teachers' perceptions of barriers to technology integration into the chemistry lessons. Underlying the study was a conceptual underpinning which focused on the concept of ICT integration, competencies of integration and chemistry curriculum. 13 participants were recruited for the study.

Integrated technology projects for rural communities

Energy Technology Data Exchange (ETDEWEB)

Forestier-Walker, C O

1982-10-01

Integrated Technology Projects (ITP) are set up so that they interact concurrently in ways that are compatible with local cultures, religions, traditions, and life styles. This management approach can take into account the low productivity of arid and semi-arid regions by increasing water, power, and fertilizer inputs in ways that will integrate their supply with other activities and minimize costs. The author illustrates how integrated agricultural, water and sanitation, energy, and housing modules can accomplish this. 1 reference, 4 figures, 5 tables. (DCK)

F-16XL Ship #2 Laminar Flow Glove mounting

Science.gov (United States)

1995-01-01

NASA's two-seat F-16XL research aircraft is shown in the modification hangar at NASA's Dryden Flight Research Center, Edwards, California, during installation of a titanium 'glove' on the upper surface of its modified left wing. The aircraft subsequently carried out a 13-month-long, 45-flight research program which investigated drawing off a small part of the boundary-layer air in order to provide laminar--or smooth--flow over a major portion of a wing flying at supersonic speeds. A turbo-compressor in the aircraft's fuselage provided suction to draw air through more than 10 million tiny laser-drilled holes in the glove via a manifold system employing 20 valves. Data obtained during the program could assist designers of future aircraft in developing a more efficient high-speed civil transport.

Challenge of Effective Technology Integration into Teaching and Learning

Science.gov (United States)

Ramorola, M. Z.

2013-01-01

South African teachers are faced with challenges in integrating technology effectively into a coherent framework at school level. There seems to be little evidence of technology integration into classroom activities such as systematic planning and implementation of lessons that require learners to think critically, work collaboratively, and use…

Comparison of Different Technologies for Integrated Solar Combined Cycles: Analysis of Concentrating Technology and Solar Integration

Directory of Open Access Journals (Sweden)

Antonio Rovira

2018-04-01

Full Text Available This paper compares the annual performance of Integrated Solar Combined Cycles (ISCCs using different solar concentration technologies: parabolic trough collectors (PTC, linear Fresnel reflectors (LFR and central tower receiver (CT. Each solar technology (i.e. PTC, LFR and CT is proposed to integrate solar energy into the combined cycle in two different ways. The first one is based on the use of solar energy to evaporate water of the steam cycle by means of direct steam generation (DSG, increasing the steam production of the high pressure level of the steam generator. The other one is based on the use of solar energy to preheat the pressurized air at the exit of the gas turbine compressor before it is introduced in the combustion chamber, reducing the fuel consumption. Results show that ISCC with DSG increases the yearly production while solar air heating reduces it due to the incremental pressure drop. However, air heating allows significantly higher solar-to-electricity efficiencies and lower heat rates. Regarding the solar technologies, PTC provides the best thermal results.

Program Integration for International Technology Exchange

International Nuclear Information System (INIS)

Rea, J.L.

1993-01-01

Sandia National Laboratories (SNL), Albuquerque, New Mexico, supports the International Technology Exchange Division (ITED) through the integration of all international activities conducted within the DOE's Office of Environmental Management (EM)

Two Inseparable Facets of Technology Integration Programs: Technology and Theoretical Framework

Science.gov (United States)

Demir, Servet

2011-01-01

This paper considers the process of program development aiming at technology integration for teachers. For this consideration, the paper focused on an integration program which was recently developed as part of a larger project. The participants of this program were 45 in-service teachers. The program continued four weeks and the conduct of the…

Technology solutions for wind integration in Ercot

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-02-23

Texas has for more than a decade led all other states in the U.S. with the most wind generation capacity on the U.S. electric grid. The State recognized the value that wind energy could provide, and committed early on to build out the transmission system necessary to move power from the windy regions in West Texas to the major population centers across the state. It also signaled support for renewables on the grid by adopting an aggressive renewable portfolio standard (RPS). The joining of these conditions with favorable Federal tax credits has driven the rapid growth in Texas wind capacity since its small beginning in 2000. In addition to the major transmission grid upgrades, there have been a number of technology and policy improvements that have kept the grid reliable while adding more and more intermittent wind generation. Technology advancements such as better wind forecasting and deployment of a nodal market system have improved the grid efficiency of wind. Successful large scale wind integration into the electric grid, however, continues to pose challenges. The continuing rapid growth in wind energy calls for a number of technology additions that will be needed to reliably accommodate an expected 65% increase in future wind resources. The Center for the Commercialization of Electric Technologies (CCET) recognized this technology challenge in 2009 when it submitted an application for funding of a regional demonstration project under the Recovery Act program administered by the U.S. Department of Energy1. Under that program the administration announced the largest energy grid modernization investment in U.S. history, making available some $3.4 billion in grants to fund development of a broad range of technologies for a more efficient and reliable electric system, including the growth of renewable energy sources like wind and solar. At that time, Texas was (and still is) the nation’s leader in the integration of wind into the grid, and was investing heavily

Technology solutions for wind integration in ERCOT

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-01-03

Texas has for more than a decade led all other states in the U.S. with the most wind generation capacity on the U.S. electric grid. The State recognized the value that wind energy could provide, and committed early on to build out the transmission system necessary to move power from the windy regions in West Texas to the major population centers across the state. It also signaled support for renewables on the grid by adopting an aggressive renewable portfolio standard (RPS). The joining of these conditions with favorable Federal tax credits has driven the rapid growth in Texas wind capacity since its small beginning in 2000. In addition to the major transmission grid upgrades, there have been a number of technology and policy improvements that have kept the grid reliable while adding more and more intermittent wind generation. Technology advancements such as better wind forecasting and deployment of a nodal market system have improved the grid efficiency of wind. Successful large scale wind integration into the electric grid, however, continues to pose challenges. The continuing rapid growth in wind energy calls for a number of technology additions that will be needed to reliably accommodate an expected 65% increase in future wind resources. The Center for the Commercialization of Electric Technologies (CCET) recognized this technology challenge in 2009 when it submitted an application for funding of a regional demonstration project under the Recovery Act program administered by the U.S. Department of Energy1. Under that program the administration announced the largest energy grid modernization investment in U.S. history, making available some $3.4 billion in grants to fund development of a broad range of technologies for a more efficient and reliable electric system, including the growth of renewable energy sources like wind and solar. At that time, Texas was (and still is) the nation’s leader in the integration of wind into the grid, and was investing heavily

Environmental restoration: Integrating hydraulic control of groundwater, innovative contaminant removal technologies and wetlands restoration--A case study at SRS

International Nuclear Information System (INIS)

Lewis, C.M.; Serkiz, S.M.; Adams, J.; Welty, M.

1992-01-01

The groundwater remediation program at the F and H Seepage Basins, Savannah River Sits (SRS) is a case study of the integration of various environmental restoration technologies at a single waste site. Hydraulic control measures are being designed to mitigate the discharge of groundwater plumes to surface water. One of the primary constituents of the plumes is tritium. An extraction and reinjection scenario is being designed to keep the tritium in circulation in the shallow groundwater, until it can naturally decay. This will be accomplished by extracting groundwater downgradient of the waste sites, treatment, and reinjection of the tritiated water into the water table upgradient of the basins. Innovative in-situ technologies, including electrolytic migration, are being field tested at the site to augment the pump-treat-reinject system. The in-situ technologies target removal of contaminants which are relatively immobile, yet represent long term risks to human health and the environment. Wetland restoration is an integral part of the F and H remediation program. Both in-situ treatment of the groundwater discharging the wetlands to adjust the pH, and replacement of water loss due to the groundwater extraction program ar being considered. Toxicity studies indicate that drought and the effects of low pH groundwater discharge have been factors in observed tree mortality in wetlands near the waste sites

Office of Technology Development integrated program for development of in situ remediation technologies

International Nuclear Information System (INIS)

Peterson, M.

1992-08-01

The Department of Energy's Office of Technology Development has instituted an integrated program focused on development of in situ remediation technologies. The development of in situ remediation technologies will focus on five problem groups: buried waste, contaminated soils, contaminated groundwater, containerized wastes and underground detonation sites. The contaminants that will be included in the development program are volatile and non volatile organics, radionuclides, inorganics and highly explosive materials as well as mixtures of these contaminants. The In Situ Remediation Integrated Program (ISR IP) has defined the fiscal year 1993 research and development technology areas for focusing activities, and they are described in this paper. These R ampersand D topical areas include: nonbiological in situ treatment, in situ bioremediation, electrokinetics, and in situ containment

Experiencing Technology Integration in Education: Children's Perceptions

Science.gov (United States)

Baytak, Ahmet; Tarman, Bülent; Ayas, Cemalettin

2011-01-01

The purpose of this phenomenological study was to explore the experiences of six children using technologies in their education. Data were collected via in-depth interviews, classroom observations, and home observations. The results showed that students have common perceptions toward their experience with technology integration. Furthermore, the…

Oxygen mask related nasal integument and osteocartilagenous disorders in F-16 fighter pilots.

Directory of Open Access Journals (Sweden)

J Rieneke C Schreinemakers

Full Text Available BACKGROUND: A preliminary survey showed half of the participating Royal Netherlands Air Force (RNLAF F-16 fighter pilots to have nasal integument and osteocartilagenous disorders related to wearing in-flight oxygen masks. AIM: To make an inventory of these disorders and possible associated factors. METHODS: All RNLAF F-16 pilots were requested to fill out a semi-structured questionnaire for a cross-sectional survey. Additionally, one squadron in The Netherlands and pilots in operational theater were asked to participate in a prospective study that required filling out a pain score after each flight. Pilot- and flight-related variables on all participants were collected from the RNLAF database. A linear mixed model was built to identify associated factors with the post-flight pain score. RESULTS: The response rate to the survey was 83%. Ninety of the 108 participants (88%, 6 missing reported tenderness, irritation, pain, erythema, skin lesions, callous skin, or swelling of nasal bridge integument or architecture. Seventy-two participants (71%, 6 missing reported their symptoms to be troublesome after a mean of 6±3 out of 10 flights (0;10, 54 missing. Sixty-six pilots participated in scoring post-flight pain. Pain scores were significantly higher if a participant had ≥3 nasal disorders, after longer than average flights, after flying abroad, and after flying with night vision goggles (respectively +2.7 points, p = 0.003; +0.2 points, p = 0.027; +1.8 points, p = 0.001; +1.2 points p = 0.005. Longer than average NVG flights and more than average NVG hours per annum decreased painscores (respectively -0.8 points, p = 0.017; -0.04 points, p = 0.005. CONCLUSIONS: The majority of the RNLAF F-16 fighter pilot community has nasal disorders in the contact area of the oxygen mask, including pain. Six pilot- or flight-related characteristics influence the experienced level of pain.

Development of the Astrobee F sounding rocket system.

Science.gov (United States)

Jenkins, R. B.; Taylor, J. P.; Honecker, H. J., Jr.

1973-01-01

The development of the Astrobee F sounding rocket vehicle through the first flight test at NASA-Wallops Station is described. Design and development of a 15 in. diameter, dual thrust, solid propellant motor demonstrating several new technology features provided the basis for the flight vehicle. The 'F' motor test program described demonstrated the following advanced propulsion technology: tandem dual grain configuration, low burning rate HTPB case-bonded propellant, and molded plastic nozzle. The resultant motor integrated into a flight vehicle was successfully flown with extensive diagnostic instrumentation.-

Radiation hardening of integrated circuits technologies

International Nuclear Information System (INIS)

Auberton-Herve, A.J.; Leray, J.L.

1991-01-01

The radiation hardening studies started in the mid decade -1960-1970. To survive the different military or space radiative environment, a new engineering science borned, to understand the degradation of electronics components. The different solutions to improve the electronic behavior in such environment, have been named radiation hardening of the technologies. Improvement of existing technologies, and qualification method have been widely studied. However, at the other hand, specific technologies was developped : The Silicon On Insulator technologies for CMOS or Bipolar. The HSOI3HD technology (supported by DGA-CEA DAM and LETI with THOMSON TMS) offers today the highest hardening level for the integration density of hundreds of thousand transistors on the same silicon. Full complex systems would be realized on a single die with a technological radiation hardening and no more system hardening

Wearable smart systems: from technologies to integrated systems.

Science.gov (United States)

Lymberis, A

2011-01-01

Wearable technology and integrated systems, so called Smart Wearable Systems (SWS) have demonstrated during the last 10-15 years significant advances in terms of, miniaturisation, seamless integration, data processing & communication, functionalisation and comfort. This is mainly due to the huge progress in sciences and technologies e.g. biomedical and micro & nano technologies, but also to a strong demand for new applications such as continuous personal health monitoring, healthy lifestyle support, human performance monitoring and support of professionals at risk. Development of wearable systems based of smart textile have, in addition, benefited from the eagerness of textile industry to develop new value-added apparel products like functionalized garments and smart clothing. Research and development in these areas has been strongly promoted worldwide. In Europe the major R&D activities were supported through the Information & Communication Technologies (ICT) priority of the R&D EU programs. The paper presents and discusses the main achievements towards integrated systems as well as future challenges to be met in order to reach a market with reliable and high value-added products.

The Luna 16 and Luna 20 samples and their integrated studies in India

International Nuclear Information System (INIS)

Lal, D.

1974-01-01

The results of an integrated study of physical and chemical properties of lunar samples returned to earth by the automatic Soviet stations Luna 16 and 20 carried out with a view to dilineate the evolutionary history of moon, are reported. The nature of the Luna 16 and Luna 20 landing sites and lunar samples, and the manner in which the integrated analyses were planned and executed, are discussed. It is noted that the two lunar missions have provided a wealth of new information in unravelling the early history of planetary formation. (A.K.)

Artistic Technology Integration: Stories From Primary and Elementary Classrooms

Science.gov (United States)

Steckel, Barbara; Shinas, Valerie Harlow; Van Vaerenewyck, Leah

2015-01-01

The purpose of this article is to inform teachers about the ways technology can be integrated to add value to literacy instruction. Artistic technology-integrated literacy and disciplinary instruction in preK through grade 4 classrooms is described through the stories of five teachers who were identified as both strong teachers of literacy and…

Building secure network by integrated technology

International Nuclear Information System (INIS)

An Dehai; Xu Rongsheng; Liu Baoxu

2000-01-01

The author introduces a method which can realize the most powerful network security prevention by the network security integrated technologies such as firewall, realtime monitor, network scanner, Web detection and security, etc

F-16XL ship #1 (#849) during first flight of the Digital Flight Control System (DFCS)

Science.gov (United States)

1997-01-01

After completing its first flight with the Digital Flight Control System on December 16, 1997, the F-16XL #1 aircraft began a series of envelope expansion flights. On January 27 and 29, 1998, it successfully completed structural clearance tests, as well as most of the load testing Only flights at Mach 1.05 at 10,000 feet, Mach 1.1 at 15,000 feet, and Mach 1.2 at 20,000 feet remained. During the next flight, on February 4, an instrumentation problem cut short the planned envelope expansion tests. After the problem was corrected, the F-16XL returned to flight status, and on February 18 and 20, flight control and evaluation flights were made. Two more research flights were planned for the following week, but another problem appeared. During the ground start up, project personnel noticed that the leading edge flap moved without being commanded. The Digital Flight Control Computer was sent to the Lockheed-Martin facility at Fort Worth, where the problem was traced to a defective chip in the computer. After it was replaced, the F-16XL #1 flew a highly successful flight controls and handling qualities evaluation flight on March 26, clearing the way for the final tests. The final limited loads expansion flight occurred on March 31, and was fully successful. As a result, the on-site Lockheed-Martin loads engineer cleared the aircraft to Mach 1.8. The remaining two handling qualities and flight control evaluation flights were both made on April 3, 1998. These three flights concluded the flight test portion of the DFCS upgrade.

Integrating technologies for scalable ecology and conservation

OpenAIRE

David C. Marvin; Lian Pin Koh; Antony J. Lynam; Serge Wich; Andrew B. Davies; Ramesh Krishnamurthy; Emma Stokes; Ruth Starkey; Gregory P. Asner

2016-01-01

Integration of multiple technologies greatly increases the spatial and temporal scales over which ecological patterns and processes can be studied, and threats to protected ecosystems can be identified and mitigated. A range of technology options relevant to ecologists and conservation practitioners are described, including ways they can be linked to increase the dimensionality of data collection efforts. Remote sensing, ground-based, and data fusion technologies are broadly discussed in the ...

Experiences of technology integration in home care nursing.

Science.gov (United States)

Johnson, K A; Valdez, R S; Casper, G R; Kossman, S P; Carayon, P; Or, C K L; Burke, L J; Brennan, P F

2008-11-06

The infusion of health care technologies into the home leads to substantial changes in the nature of work for home care nurses and their patients. Nurses and nursing practice must change to capitalize on these innovations. As part of a randomized field experiment evaluating web-based support for home care of patients with chronic heart disease, we engaged nine nurses in a dialogue about their experience integrating this modification of care delivery into their practice. They shared their perceptions of the work they needed to do and their perceptions and expectations for patients and themselves in using technologies to promote and manage self-care. We document three overarching themes that identify preexisting factors that influenced integration or represent the consequences of technology integration into home care: doing tasks differently, making accommodations in the home for devices and computers, and being mindful of existing expectations and skills of both nurses and patients.

Monolithic Microwave Integrated Circuits Based on GaAs Mesfet Technology

Science.gov (United States)

Bahl, Inder J.

Advanced military microwave systems are demanding increased integration, reliability, radiation hardness, compact size and lower cost when produced in large volume, whereas the microwave commercial market, including wireless communications, mandates low cost circuits. Monolithic Microwave Integrated Circuit (MMIC) technology provides an economically viable approach to meeting these needs. In this paper the design considerations for several types of MMICs and their performance status are presented. Multifunction integrated circuits that advance the MMIC technology are described, including integrated microwave/digital functions and a highly integrated transceiver at C-band.

A Senior Teacher's Implementation of Technology Integration

Science.gov (United States)

Tsai, Hsien-Chang

2015-01-01

This study investigated whether a senior teacher with many years of teaching experience, despite lacking adequate technology skills or contending with other barriers, can sufficiently implement technology integration in the classroom. The research was conducted between October 2013 and January 2014 and was focused on a junior high school biology…

Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

Directory of Open Access Journals (Sweden)

John Øvretveit

2017-09-01

Full Text Available Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

Science.gov (United States)

2017-01-01

Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care. PMID:29588629

Evaluation of gross tumor size using CT, 18F-FDG PET, integrated 18F-FDG PET/CT and pathological analysis in non-small cell lung cancer

International Nuclear Information System (INIS)

Yu Huiming; Liu Yunfang; Hou Ming; Liu Jie; Li Xiaonan; Yu Jinming

2009-01-01

Purpose: The correlation of gross tumor sizes between combined 18 F-FDG PET/CT images and macroscopic surgical samples has not yet been studied in detail. In the present study, we compared CT, 18 F-FDG PET and combined 18 F-FDG PET/CT for the delineation of gross tumor volume (GTV) and validated the results through examination of the macroscopic surgical specimen. Methods: Fifty-two operable non-small cell lung cancer (NSCLC) patients had integrated 18 F-FDG PET/CT scans preoperatively and pathological examination post-operation. Four separate maximal tumor sizes at X (lateral direction), Y (ventro-dorsal direction) and Z (cranio-caudal direction) axis were measured on 18 F-FDG PET, CT, combined 18 F-FDG PET/CT and surgical specimen, respectively. Linear regression was calculated for each of the three imaging measurements versus pathological measurement. Results: No significant differences were observed among the tumor sizes measured by three images and pathological method. Compared with pathological measurement, CT size at X, Y, Z axis was larger, whereas combined 18 F-FDG PET/CT and 18 F-FDG PET size were smaller. Combined 18 F-FDG PET/CT size was more similar to the pathological size than that of 18 F-FDG PET or CT. Results of linear regressions showed that integrated 18 F-FDG PET/CT was the most accurate modality in measuring the size of cancer. Conclusions: 18 F-FDG PET/CT correlates more faithfully with pathological findings than 18 F-FDG PET or CT. Integrated 18 F-FDG PET/CT is an effective tool to define the target of GTV in radiotherapy.

A high-performance trench capacitor integrated in a passive integration technology

International Nuclear Information System (INIS)

Geiselbrechtinger, Angelika; Büyüktas, Kevni; Allers, Karl-Heinz; Hartung, Wolfgang

2009-01-01

The requirements for the electrical characteristics of passive on-chip devices become more and more important. The electrical performance of RF circuits is predominantly restricted by the passives. New technologies and new device concepts are necessary to meet the demands. In this work, a trench capacitor developed for RF applications is presented for the first time. This so-called SilCap (silicon capacitor) device features very high capacitance density, extreme low-voltage dependence, excellent temperature stability, good RF performance and a high breakthrough voltage. First, the device function and the technological concept are introduced. The concept is realized without implementing cost-intensive high-k materials. This trench capacitor is integrated in the front end of line of a passive integration technology. The achieved specific capacitance density is compared to a standard planar capacitor. Performance of the SilCap in terms of quality factor and breakthrough voltage is shown. Finally, reliability data of this trench capacitor are presented with special focus on extrinsic and dielectric lifetime

Mobile Technology and CAD Technology Integration in Teaching Architectural Design Process for Producing Creative Product

Science.gov (United States)

Bin Hassan, Isham Shah; Ismail, Mohd Arif; Mustafa, Ramlee

2011-01-01

The purpose of this research is to examine the effect of integrating the mobile and CAD technology on teaching architectural design process for Malaysian polytechnic architectural students in producing a creative product. The website is set up based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

Vacuum decay container/closure integrity testing technology. Part 1. ASTM F2338-09 precision and bias studies.

Science.gov (United States)

Wolf, Heinz; Stauffer, Tony; Chen, Shu-Chen Y; Lee, Yoojin; Forster, Ronald; Ludzinski, Miron; Kamat, Madhav; Godorov, Phillip; Guazzo, Dana Morton

2009-01-01

ASTM F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method is applicable for leak-testing rigid and semi-rigid non-lidded trays; trays or cups sealed with porous barrier lidding materials; rigid, nonporous packages; and flexible, nonporous packages. Part 1 of this series describes the precision and bias studies performed in 2008 to expand this method's scope to include rigid, nonporous packages completely or partially filled with liquid. Round robin tests using three VeriPac 325/LV vacuum decay leak testers (Packaging Technologies & Inspection, LLC, Tuckahoe, NY) were performed at three test sites. Test packages were 1-mL glass syringes. Positive controls had laser-drilled holes in the barrel ranging from about 5 to 15 microm in nominal diameter. Two different leak tests methods were performed at each site: a "gas leak test" performed at 250 mbar (absolute) and a "liquid leak test" performed at about 1 mbar (absolute). The gas leak test was used to test empty, air-filled syringes. All defects with holes > or = 5.0 microm and all no-defect controls were correctly identified. The only false negative result was attributed to a single syringe with a ASTM F2338-09 test method and the precision and bias study report are available by contacting ASTM International in West Conshohocken, PA, USA (www.astm.org).

MEMS-LSI Integrated Microchip using Pseudo-SoC Technology

Science.gov (United States)

Funaki, Hideyuki; Itaya, Kazuhiko; Yamada, Hiroshi; Onozuka, Yutaka; Iida, Atsuko

The authors have developed pseudo-SoC technology to realize MEMS-LSI integrated micro-chip. The pseudo-SoC technology consists of three technologies which are wafer reconfiguration technology, inter-chip redistribution layer technology, and pseudo-SoC thinning technology. In the wafer reconfiguration technology, the filling of resin and surface step between heterogeneous chips were improved through the optimization of vacuum printing process and resin material. These improvements reduced the warpage of reconfiguration wafer, leading to achievement of the reconfiguration wafer with 5 inch in diameter. In the inter-chip redistribution layer technology, the interface adherence between planar layer and inter-chip redistribution layer was improved, leading to the inter-chip redistribution layer with 1μm/1μm in line/space on reconfiguration wafer. In the pseudo-SoC thinning technology, thin pseudo-SoC device with 100μm in thickness was achieved through developing mechanical backside grinding process technology. Furthermore, ultra-thin pseudo-SoC which integrated electrostatic MEMS light valve and PWM driver IC was prototyped through developing the ultra-thin MEMS encapsulation technology.

Toward a Broader Understanding of Teacher Technology Integration Beliefs and Values

Science.gov (United States)

Kimmons, Royce; Hall, Cassidy

2016-01-01

In authentic K-12 settings, technology integration is influenced by the decisions and perspectives of a variety of stakeholders, but current research and practice related to teacher technology integration tends to revolve only around pedagogical and technical skill factors influencing integration, thereby ignoring the institutional realities that…

Integration of energy efficient technologies in UK supermarkets

International Nuclear Information System (INIS)

Ochieng, E.G.; Jones, N.; Price, A.D.F.; Ruan, X.; Egbu, C.O; Zuofa, T.

2014-01-01

The purpose of this paper is twofold: to determine if the integration of energy efficient technologies in UK supermarkets can determine consumer behaviour, and to establish if such activities can help satisfying the environmental elements of the clients corporate social responsibilities (CSR) in an attempt to create a competitive advantage. A literature review of existing material considered the history and drivers of sustainability, the types of energy efficient technologies and factors concerning CSR and consumer behaviour in relation to the supermarket industry. Interviews with 15 senior store managers were recorded and transcribed. The opinions of the senior store managers were then sought and analysed using qualitative research software NVivo software. Validity of the data was achieved at a later stage through workshops. The results of this paper suggested that there is a definite lack of awareness and knowledge amongst customers regarding energy efficient technologies. From the findings, it was further established that the key driver for retailers who integrate energy efficient technologies is fiscal incentives, although it was suggested some retailers use CSR strategies to report there are environmental achievements it was ultimately found that cost savings were the primary driver. - Highlights: • The effect of sustainability towards consumer behaviour was explored. • Majority of consumers are unaware of energy efficient technologies. • Energy efficient technologies do not determine or create shifts in paradigm in consumer actions. • Stores are driven to integrate energy efficient technologies more by government legislation. • Participants were clear in making the point that their image and reputation was based on trust

A systemic model for differentiating school technology integration

Directory of Open Access Journals (Sweden)

Tel Amiel

2016-07-01

Full Text Available School technology integration rarely begins with school or educator choice. It is part of a wider context where external and internal factors have direct influence on the goals and tools that are adopted over time. The objective of this study is to investigate the systemic conditions that contribute or inhibit the development of different activities by teachers making use of new media. We compiled a list of well-known conditions for technology integration success and mapped these in the historical and culturally bound perspective of activity theory (cultural historical activity theory. We conducted a multiple case study analysis of four schools, public and private. The results point to unique and distinctive scenarios even when homogeneity would be expected, reinforcing the argument that material conditions do not determine pedagogical outcomes nor do they determine changes in practice. Beyond this, the study proposes a methodology that can help elicit tensions in technology integration, pointing to avenues for school development.

Episode-Centered Guidelines for Teacher Belief Change toward Technology Integration

Science.gov (United States)

Er, Erkan; Kim, ChanMin

2017-01-01

Teachers' episodic memories influence their beliefs. The investigation of episodic memories can help identify the teacher beliefs that limit technology-integration. We propose the Episode-Centered Belief Change (ECBC) model that utilizes teachers' episodic memories for changing beliefs impeding effective technology integration. We also propose…

Micro-resonators based on integrated polymer technology for optical sensing

Science.gov (United States)

Girault, Pauline; Lemaitre, Jonathan; Guendouz, Mohammed; Lorrain, Nathalie; Poffo, Luiz; Gadonna, Michel; Bosc, Dominique

2014-05-01

Research on sensors has experienced a noticeable development over the last decades especially in label free optical biosensors. However, compact sensors without markers for rapid, reliable and inexpensive detection of various substances induce a significant research of new technological solutions. The context of this work is the development of a sensor based on easily integrated and inexpensive micro-resonator (MR) component in integrated optics, highly sensitive and selective mainly in the areas of health and food. In this work, we take advantage of our previous studies on filters based on micro-resonators (MR) to experiment a new couple of polymers in the objective to use MR as a sensing function. MRs have been fabricated by processing SU8 polymer as core and PMATRIFE polymer as cladding layer of the waveguide. The refractive index contrast reaches 0.16 @ 1550 nm. Sub-micronic ring waveguides gaps from 0.5 to 1 μm have been successfully achieved with UV (i-line) photolithography. This work confirms our forecasts, published earlier, about the resolution that can be achieved. First results show a good extinction coefficient of ~17 dB, a quality factor around 104 and a finesse of 12. These results are in concordance with the theoretical study and they allow us to validate our technology with this couple of polymers. Work is going on with others lower cladding materials that will be used to further increase refractive index contrast for sensing applications.

Research and Development Needs for Building-Integrated Solar Technologies

Energy Technology Data Exchange (ETDEWEB)

none,

2014-01-01

The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development (R&D) needs that will be required for BIST to make a substantial contribution toward that goal. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).

Integrating fMRI with psychophysiological measurements in the study of decision-making

OpenAIRE

Wong, Savio W.H.; Xue, Gui; Bechara, Antoine

2011-01-01

Neuroimaging techniques have recently been used to examine the neural mechanism of decision-making. Nevertheless, most of the neuroimaging studies overlook the importance of emotion and autonomic response in modulating the process of decision-making. In this paper, we discussed how to integrating fMRI with psychophysiological measurements in studying decision-making. We suggested that psychophysiological data would complement with fMRI findings in providing a more comprehensive understanding ...

Sensor Technology Integration for Efficient and Cost-Effective D and D

International Nuclear Information System (INIS)

Varona, J. M.; Lagos, L. E.

2002-01-01

The deactivation and decommissioning of radiologically contaminated facilities require the use of a multitude of technologies to perform characterization, decontamination, dismantlement, and waste management. Current baseline technologies do not provide adequate tools to perform this work in an efficient and cost-effective manner. Examples of such tasks that can be modified to enhance the D and D work include: floor and wall decontamination, pipe decontamination, and surveillance and monitoring. FIU-HCET's Technology Development, Integration and Deployment (TDID) group aims to enhance the D and D process by integrating sensor technology to existing decontamination and remote surveillance tools. These integrated systems have been demonstrated throughout the DOE Complex and commercial nuclear facilities undergoing decommissioning. Finding new ways of integrating technologies utilized in the decommissioning and surveillance and monitoring process has been a goal of this group during the past several years. Current and previous integration projects include: Mobile Integrated Piping Decontamination and Characterization System, On-Line Decontamination and Characterization System, In-Situ Pipe Decontamination and Unplugging System, Remote Hazardous Environment Surveyor (RHES), and the Online Handheld grit blasting decontamination system As a result of integrating sensors with D and D tools, the resulting technologies have removed the downtime currently found in baseline processes by allowing operators and project managers to have real-time contamination data during the specified D and D process. This added component allows project managers to verify that full decontamination and surveillance has been conducted. Through successful demonstration and deployments of the TDID-developed technologies, FIU-HCET has provided tools that can impact the cost, schedule and health and safety of D and D operations in a positive way, leading to shorter downtimes and significant cost

Development of wide range charge integration application specified integrated circuit for photo-sensor

Energy Technology Data Exchange (ETDEWEB)

Katayose, Yusaku, E-mail: katayose@ynu.ac.jp [Department of Physics, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501 (Japan); Ikeda, Hirokazu [Institute of Space and Astronautical Science (ISAS)/Japan Aerospace Exploration Agency (JAXA), 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); Tanaka, Manobu [National Laboratory for High Energy Physics, KEK, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Shibata, Makio [Department of Physics, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama, Kanagawa 240-8501 (Japan)

2013-01-21

A front-end application specified integrated circuit (ASIC) is developed with a wide dynamic range amplifier (WDAMP) to read-out signals from a photo-sensor like a photodiode. The WDAMP ASIC consists of a charge sensitive preamplifier, four wave-shaping circuits with different amplification factors and Wilkinson-type analog-to-digital converter (ADC). To realize a wider range, the integrating capacitor in the preamplifier can be changed from 4 pF to 16 pF by a two-bit switch. The output of a preamplifier is shared by the four wave-shaping circuits with four gains of 1, 4, 16 and 64 to adapt the input range of ADC. A 0.25-μm CMOS process (of UMC electronics CO., LTD) is used to fabricate the ASIC with four-channels. The dynamic range of four orders of magnitude is achieved with the maximum range over 20 pC and the noise performance of 0.46 fC + 6.4×10{sup −4} fC/pF. -- Highlights: ► A front-end ASIC is developed with a wide dynamic range amplifier. ► The ASIC consists of a CSA, four wave-shaping circuits and pulse-height-to-time converters. ► The dynamic range of four orders of magnitude is achieved with the maximum range over 20 pC.

CMOS analog integrated circuit design technology; CMOS anarogu IC sekkei gijutsu

Energy Technology Data Exchange (ETDEWEB)

Fujimoto, H.; Fujisawa, A. [Fuji Electric Co. Ltd., Tokyo (Japan)

2000-08-10

In the field of the LSI (large scale integrated circuit) in rapid progress toward high integration and advanced functions, CAD (computer-aided design) technology has become indispensable to LSI development within a short period. Fuji Electric has developed design technologies and automatic design system to develop high-quality analog ICs (integrated circuits), including power supply ICs. within a short period. This paper describes CMOS (complementary metal-oxide semiconductor) analog macro cell, circuit simulation, automatic routing, and backannotation technologies. (author)

INTEGRATING MOBILE TECHNOLOGY IN ESL CLASSROOMS

OpenAIRE

K. Manigandan; N. Santha Kumar; B. Devi

2017-01-01

It’s the right time to know more about mobile technology and mobile learning in the present digital era where mobile phones have become an integral part of everyone’s life. In recent years there have been amazing advances in mobile technology. Mobile learning has enabled various institutions, colleges and schools throughout the world in order to modernize aspects of teaching, learning and training. The key words in mobile learning are “facilitate, support, enhance, extend”.

Advanced Manufacturing Technologies (AMT): Composites Integrated Modeling

Data.gov (United States)

National Aeronautics and Space Administration — The Composites Integrated Modeling (CIM) Element developed low cost, lightweight, and efficient composite structures, materials and manufacturing technologies with...

Integration of the Aurora KrF ICF laser system at Los Alamos

International Nuclear Information System (INIS)

Rosocha, L.A.; Blair, L.S.

1988-01-01

The Aurora laser system, under construction at the Los Alamos National Laboratory for the past few years, is now being integrated into a working system for examining the applicability of high-power KrF lasers to inertial confinement fusion (ICF). The design principles of the system have been described in detail in earlier publications and conferences. Multikilojoule 248-nm 5-ns duration laser pulses, which have been derived from angular-multiplexed electron-beam-driven KrF amplifiers, are to be delivered to ICF targets when the system is fully integrated. The authors describe the progress of the Aurora system toward the goal of delivering energy (MkJ/48 pulses stacked into one 5-ns pulse/200-μm spot) to ICF targets. Integrated performance to date of the front end optical multiplexer/demultiplexer e-beam-driven amplifiers and alignment hardware are discussed in particular. They have concentrated on the demonstration of system integration at a modest (--100-J) level of energy on-target (without the final amplifier stage). They discuss the amplifier gain measurements, the extraction of energy from a chain of three e-beam-driven machines, and progress toward the delivery of on-target energy

Using Action Research Projects to Examine Teacher Technology Integration Practices

Science.gov (United States)

Dawson, Kara

2012-01-01

This study examined the technology integration practices of teachers involved in a statewide initiative via one cycle of action research. It differs from other studies of teacher technology integration practices because it simultaneously involved and provided direct benefits to teachers and researchers. The study used thematic analysis to provide…

Integration of GMR Sensors with Different Technologies.

Science.gov (United States)

Cubells-Beltrán, María-Dolores; Reig, Càndid; Madrenas, Jordi; De Marcellis, Andrea; Santos, Joana; Cardoso, Susana; Freitas, Paulo P

2016-06-22

Less than thirty years after the giant magnetoresistance (GMR) effect was described, GMR sensors are the preferred choice in many applications demanding the measurement of low magnetic fields in small volumes. This rapid deployment from theoretical basis to market and state-of-the-art applications can be explained by the combination of excellent inherent properties with the feasibility of fabrication, allowing the real integration with many other standard technologies. In this paper, we present a review focusing on how this capability of integration has allowed the improvement of the inherent capabilities and, therefore, the range of application of GMR sensors. After briefly describing the phenomenological basis, we deal on the benefits of low temperature deposition techniques regarding the integration of GMR sensors with flexible (plastic) substrates and pre-processed CMOS chips. In this way, the limit of detection can be improved by means of bettering the sensitivity or reducing the noise. We also report on novel fields of application of GMR sensors by the recapitulation of a number of cases of success of their integration with different heterogeneous complementary elements. We finally describe three fully functional systems, two of them in the bio-technology world, as the proof of how the integrability has been instrumental in the meteoric development of GMR sensors and their applications.

Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

Science.gov (United States)

Strudwick, Gillian

2015-05-01

The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

Building Technologies Research and Integration Center (BTRIC)

Data.gov (United States)

Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

A New Framework for Evaluating the Functional Capabilities of Intra-Enterprise Application Integration Technologies

Directory of Open Access Journals (Sweden)

Hossein Moradi

2010-10-01

Full Text Available Enterprise Application Integration (EAI technologies facilitate the sharing of information and business processes of interrelated information systems in order to achieve the target integrated systems. Different EAI solutions and technologies provide various capabilities which lead to the complexity of their evaluation process. To reduce this complexity, appropriate tools for evaluating the functional capabilities of EAI technologies are required. This paper proposes a new framework for evaluating the functional capabilities of EAI technologies, which simplify the process of evaluating the functional capabilities of intra-enterprise integration technologies and solutions.The proposed framework for evaluating the EAI technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various EAI technologies are categorized in different classes and are evaluated based on their supporting level for functional integration capabilities’ criteria.The new framework offers two lists containing integration technologies and their associated classifications, and functional capabilities of integration technologies. The proposed framework is a novel one which can be used by information system experts for evaluation and comparison purposes of various integration technologies.

Electroless plating technology of integral hohlraum Cu target

International Nuclear Information System (INIS)

Liu Jiguang; Fu Qu; Wan Xiaobo; Zhou Lan; Xiao Jiang

2005-01-01

The electroless plating method of making integral hohlraum Cu target and corrosion-resistant technology of target's surface were researched. The actual process was as follows, choosing plexiglass (PMMA) as arbor, taking cationic activation and electroless plating Cu on the arbor surface, taking arbor surface passivation and chemical etching by C 6 H 5 N 3 solution. The technology is easy to realize and its cost is lower, so it is of great reference value for fabricating other integral hohlraum metal or alloy targets used for inertial confinement fusion study. (author)

Student Collaboration and School Educational Technology: Technology Integration Practices in the Classroom

Science.gov (United States)

Scalise, Kathleen

2016-01-01

With the onset of Web 2.0 and 3.0--the social and semantic webs--a next wave for integration of educational technology into the classroom is occurring. The aim of this paper is to show how some teachers are increasingly bringing collaboration and shared meaning-making through technology environments into learning environments (Evergreen Education…

Teachers' Perceptions of Technology Integration in a Unified School District

Science.gov (United States)

Bloodman, Suzette L.

2014-01-01

A unified school district (USD) continues to invest millions of dollars into its technology integration initiatives with minimal academic gains. Since teachers are essential to effective technology integration, the purpose of this phenomenological study was to analyze the perceptions of 13 teachers within the USD relative to how they could more…

The computational design of Geological Disposal Technology Integration System

International Nuclear Information System (INIS)

Ishihara, Yoshinao; Iwamoto, Hiroshi; Kobayashi, Shigeki; Neyama, Atsushi; Endo, Shuji; Shindo, Tomonori

2002-03-01

In order to develop 'Geological Disposal Technology Integration System' that is intended to systematize as knowledge base for fundamental study, the computational design of an indispensable database and image processing function to 'Geological Disposal Technology Integration System' was done, the prototype was made for trial purposes, and the function was confirmed. (1) Database of Integration System which systematized necessary information and relating information as an examination of a whole of repository composition and managed were constructed, and the system function was constructed as a system composed of image processing, analytical information management, the repository component management, and the system security function. (2) The range of the data treated with this system and information was examined, the design examination of the database structure was done, and the design examination of the image processing function of the data preserved in an integrated database was done. (3) The prototype of the database concerning a basic function, the system operation interface, and the image processing function was manufactured to verify the feasibility of the 'Geological Disposal Technology Integration System' based on the result of the design examination and the function was confirmed. (author)

75 FR 20388 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

Science.gov (United States)

2010-04-19

... Machines Corporation, Global Technology Services Business Unit, Integrated Technology Services, Cost and... Technology Services Business Unit, Integrated Technology Services, Cost and Expense Team working from various... Technology Services Business Unit. The company reports that workers leased from Datrose, Inc., were employed...

Cluster processing for 16Mb DRAM production

International Nuclear Information System (INIS)

Bergendahl, A.; Horak, D.

1989-01-01

Multichamber and in-situ technology are used to meet the challenge of manufacturing 16-Mb cost/performance DRAMs. The 16-Mb fabrication process is more complex than earlier 1-Mb and 4-Mb chips. Clustering of sequential process steps effectively compensates for both manufacturing complexity and foreign-material (FM) related defect densities. The development time of clusters combining new processes and equipment in multiple automated steps is nearly as long as the product development cycle. This necessitates codevelopment of manufacturing process cluster with technology integration while addressing the factors influencing FM defect generation, processing turnaround time (TAT), manufacturing costs, yield and array cell and support device designs. The advantages of multichamber and in situ processing have resulted in their application throughout the entire 16-Mb DRAM process as appropriate equipment becomes available

A Framework for Integration of IVHM Technologies for Intelligent Integration for Vehicle Management

Science.gov (United States)

Paris, Deidre E.; Trevino, Luis; Watson, Mike

2005-01-01

As a part of the overall goal of developing Integrated Vehicle Health Management (IVHM) systems for aerospace vehicles, the NASA Faculty Fellowship Program (NFFP) at Marshall Space Flight Center has performed a pilot study on IVHM principals which integrates researched IVHM technologies in support of Integrated Intelligent Vehicle Management (IIVM). IVHM is the process of assessing, preserving, and restoring system functionality across flight and ground systems (NASA NGLT 2004). The framework presented in this paper integrates advanced computational techniques with sensor and communication technologies for spacecraft that can generate responses through detection, diagnosis, reasoning, and adapt to system faults in support of IIVM. These real-time responses allow the IIVM to modify the effected vehicle subsystem(s) prior to a catastrophic event. Furthermore, the objective of this pilot program is to develop and integrate technologies which can provide a continuous, intelligent, and adaptive health state of a vehicle and use this information to improve safety and reduce costs of operations. Recent investments in avionics, health management, and controls have been directed towards IIVM. As this concept has matured, it has become clear the IIVM requires the same sensors and processing capabilities as the real-time avionics functions to support diagnosis of subsystem problems. New sensors have been proposed, in addition, to augment the avionics sensors to support better system monitoring and diagnostics. As the designs have been considered, a synergy has been realized where the real-time avionics can utilize sensors proposed for diagnostics and prognostics to make better real-time decisions in response to detected failures. IIVM provides for a single system allowing modularity of functions and hardware across the vehicle. The framework that supports IIVM consists of 11 major on-board functions necessary to fully manage a space vehicle maintaining crew safety and mission

Technology Integration Initiative In Support of Outage Management

Energy Technology Data Exchange (ETDEWEB)

Gregory Weatherby; David Gertman

2012-07-01

Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Often, command and control during outages is maintained in the outage control center where many of the underlying technologies supporting outage control are the same as those used in the 1980’s. This research reports on the use of advanced integrating software technologies and hand held mobile devices as a means by which to reduce cycle time, improve accuracy, and enhance transparency among outage team members. This paper reports on the first phase of research supported by the DOE Light Water Reactor Sustainability (LWRS) Program that is performed in close collaboration with industry to examine the introduction of newly available technology allowing for safe and efficient outage performance. It is thought that this research will result in: improved resource management among various plant stakeholder groups, reduced paper work, and enhanced overall situation awareness for the outage control center management team. A description of field data collection methods, including personnel interview data, success factors, end-user evaluation and integration of hand held devices in achieving an integrated design are also evaluated. Finally, the necessity of obtaining operations cooperation support in field studies and technology evaluation is acknowledged.

Photonic integrated circuits : a new approach to laser technology

NARCIS (Netherlands)

Piramidowicz, R.; Stopinski, S.T.; Lawniczuk, K.; Welikow, K.; Szczepanski, P.; Leijtens, X.J.M.; Smit, M.K.

2012-01-01

In this work a brief review on photonic integrated circuits (PICs) is presented with a specific focus on integrated lasers and amplifiers. The work presents the history of development of the integration technology in photonics and its comparison to microelectronics. The major part of the review is

Integration of Information Technologies in Enterprise Application Development

OpenAIRE

Iulia SURUGIU

2012-01-01

Healthcare enterprises are disconnected. In the era of integrated information systems and Internet explosion, the necessity of information systems integration reside from business process evolution, on the one hand, and from information technology tendencies, on the other hand. In order to become more efficient and adaptive to change, healthcare organizations are tremendously preoccupied of business process automation, flexibility and complexity. The need of information systems integration ar...

Technology advancement for integrative stem cell analyses.

Science.gov (United States)

Jeong, Yoon; Choi, Jonghoon; Lee, Kwan Hyi

2014-12-01

Scientists have endeavored to use stem cells for a variety of applications ranging from basic science research to translational medicine. Population-based characterization of such stem cells, while providing an important foundation to further development, often disregard the heterogeneity inherent among individual constituents within a given population. The population-based analysis and characterization of stem cells and the problems associated with such a blanket approach only underscore the need for the development of new analytical technology. In this article, we review current stem cell analytical technologies, along with the advantages and disadvantages of each, followed by applications of these technologies in the field of stem cells. Furthermore, while recent advances in micro/nano technology have led to a growth in the stem cell analytical field, underlying architectural concepts allow only for a vertical analytical approach, in which different desirable parameters are obtained from multiple individual experiments and there are many technical challenges that limit vertically integrated analytical tools. Therefore, we propose--by introducing a concept of vertical and horizontal approach--that there is the need of adequate methods to the integration of information, such that multiple descriptive parameters from a stem cell can be obtained from a single experiment.

Integration of multi-technology on oil spill emergency preparedness.

Science.gov (United States)

Liao, Zhenliang; Hannam, Phillip M; Xia, Xiaowei; Zhao, Tingting

2012-10-01

This paper focuses on the integration of technologies including Case-Based Reasoning (CBR), Genetic Algorithm (GA) and Artificial Neural Network (ANN) for establishing emergency preparedness for oil spill accidents. In CBR, the Frame method is used to define case representation, and the HEOM (Heterogeneous Euclidean-Overlap Metric) is improved to define the similarity of case properties. In GA, we introduce an Improved Genetic Algorithm (IGA) that achieves case adaptation, in which technologies include the Multi-Parameter Cascade Code method, the Small Section method for generation of an initial population, the Multi-Factor Integrated Fitness Function, and Niche technology for genetic operations including selection, crossover, and mutation. In ANN, a modified back-propagation algorithm is employed to train the algorithm to quickly improve system preparedness. Through the analysis of 32 fabricated oil spill cases, an oil spill emergency preparedness system based on the integration of CBR, GA and ANN is introduced. In particular, the development of ANN is presented and analyzed. The paper also discusses the efficacy of our integration approach. Copyright © 2012 Elsevier Ltd. All rights reserved.

Thermonuclear 19F(p, {{\\boldsymbol{\\alpha }}}_{0})16O reaction rate

Science.gov (United States)

He, Jian-Jun; Lombardo, Ivano; Dell'Aquila, Daniele; Xu, Yi; Zhang, Li-Yong; Liu, Wei-Ping

2018-01-01

The thermonuclear 19F(p, {{{α }}}0)16O reaction rate in the temperature region 0.007-10 GK has been derived by re-evaluating the available experimental data, together with the low-energy theoretical R-matrix extrapolations. Our new rate deviates by up to about 30% compared to the previous results, although all rates are consistent within the uncertainties. At very low temperature (e.g. 0.01 GK) our reaction rate is about 20% lower than the most recently published rate, because of a difference in the low energy extrapolated S-factor and a more accurate estimate of the reduced mass used in the calculation of the reaction rate. At temperatures above ˜1 GK, our rate is lower, for instance, by about 20% around 1.75 GK, because we have re-evaluated the previous data (Isoya et al., Nucl. Phys. 7, 116 (1958)) in a meticulous way. The present interpretation is supported by the direct experimental data. The uncertainties of the present evaluated rate are estimated to be about 20% in the temperature region below 0.2 GK, and are mainly caused by the lack of low-energy experimental data and the large uncertainties in the existing data. Asymptotic giant branch (AGB) stars evolve at temperatures below 0.2 GK, where the 19F(p, {{α }})16O reaction may play a very important role. However, the current accuracy of the reaction rate is insufficient to help to describe, in a careful way, the fluorine over-abundances observed in AGB stars. Precise cross section (or S factor) data in the low energy region are therefore needed for astrophysical nucleosynthesis studies. Supported by National Natural Science Foundation of China (11490562, 11490560, 11675229) and National Key Research and Development Program of China (2016YFA0400503)

Integrative mapping analysis of chicken microchromosome 16 organization

Directory of Open Access Journals (Sweden)

Bed'hom Bertrand

2010-11-01

Full Text Available Abstract Background The chicken karyotype is composed of 39 chromosome pairs, of which 9 still remain totally absent from the current genome sequence assembly, despite international efforts towards complete coverage. Some others are only very partially sequenced, amongst which microchromosome 16 (GGA16, particularly under-represented, with only 433 kb assembled for a full estimated size of 9 to 11 Mb. Besides the obvious need of full genome coverage with genetic markers for QTL (Quantitative Trait Loci mapping and major genes identification studies, there is a major interest in the detailed study of this chromosome because it carries the two genetically independent MHC complexes B and Y. In addition, GGA16 carries the ribosomal RNA (rRNA genes cluster, also known as the NOR (nucleolus organizer region. The purpose of the present study is to construct and present high resolution integrated maps of GGA16 to refine its organization and improve its coverage with genetic markers. Results We developed 79 STS (Sequence Tagged Site markers to build a physical RH (radiation hybrid map and 34 genetic markers to extend the genetic map of GGA16. We screened a BAC (Bacterial Artificial Chromosome library with markers for the MHC-B, MHC-Y and rRNA complexes. Selected clones were used to perform high resolution FISH (Fluorescent In Situ Hybridization mapping on giant meiotic lampbrush chromosomes, allowing meiotic mapping in addition to the confirmation of the order of the three clusters along the chromosome. A region with high recombination rates and containing PO41 repeated elements separates the two MHC complexes. Conclusions The three complementary mapping strategies used refine greatly our knowledge of chicken microchromosome 16 organisation. The characterisation of the recombination hotspots separating the two MHC complexes demonstrates the presence of PO41 repetitive sequences both in tandem and inverted orientation. However, this region still needs to

A Needs Analysis for Technology Integration Plan: Challenges and Needs of Teachers

Science.gov (United States)

Vatanartiran, Sinem; Karadeniz, Sirin

2015-01-01

Lack of technology leadership and technology integration plans are important obstacles for using technology effectively in schools. We carried out a large-scale study to be able to design a technology integration plan for one of the pilot provinces that Fatih Project was initiated. The purpose of this research is to examine the perceived…

Technology and diabetes self-management: An integrative review

OpenAIRE

Hunt, Caralise W

2015-01-01

Technology can be used to supplement healthcare provider diabetes care by providing both educational and motivational support. Education can be provided using technology allowing patients to learn new practices and routines related to diabetes management. Technology can support daily diabetes self-management activities including blood glucose monitoring, exercising, healthy eating, taking medication, monitoring for complications, and problem-solving. This article describes an integrative revi...

16 CFR 312.8 - Confidentiality, security, and integrity of personal information collected from children.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Confidentiality, security, and integrity of... COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS CHILDREN'S ONLINE PRIVACY PROTECTION RULE § 312.8 Confidentiality, security, and integrity of personal information collected from children. The operator must...

Integrating Educational Technologies into the Culinary Classroom and Instructional Kitchen

Science.gov (United States)

Glass, Samuel

2005-01-01

The integration of educational technologies has and will continue to change the nature of education. From the advent of the printed word to the current use of computer assisted teaching and learning, the use of technology is an integral part of modern day realities and approaches to education. The purpose of this paper is to review some of the…

Integration of GMR Sensors with Different Technologies

Directory of Open Access Journals (Sweden)

María-Dolores Cubells-Beltrán

2016-06-01

Full Text Available Less than thirty years after the giant magnetoresistance (GMR effect was described, GMR sensors are the preferred choice in many applications demanding the measurement of low magnetic fields in small volumes. This rapid deployment from theoretical basis to market and state-of-the-art applications can be explained by the combination of excellent inherent properties with the feasibility of fabrication, allowing the real integration with many other standard technologies. In this paper, we present a review focusing on how this capability of integration has allowed the improvement of the inherent capabilities and, therefore, the range of application of GMR sensors. After briefly describing the phenomenological basis, we deal on the benefits of low temperature deposition techniques regarding the integration of GMR sensors with flexible (plastic substrates and pre-processed CMOS chips. In this way, the limit of detection can be improved by means of bettering the sensitivity or reducing the noise. We also report on novel fields of application of GMR sensors by the recapitulation of a number of cases of success of their integration with different heterogeneous complementary elements. We finally describe three fully functional systems, two of them in the bio-technology world, as the proof of how the integrability has been instrumental in the meteoric development of GMR sensors and their applications.

Ten Items of Integrated Technology Developed by CNPC

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

@@ The technological work of China National Petroleum Corporation (CNPC) was based on the company's general development strategy to become a multinational giant with international competitiveness during the 10th FiveYear Plan Period (2001-2005). The technological efforts were focused on strengthening strategic management of technology to identify the technological development targets, optimizing allocation of technological resources and increasing technological investment to highlight creation of key technology. Aiming at the important and key technologies needed for main business development,CNPC launched 15 technological projects at the State level with a 100 percent completion rate and 379 other projects at the corporate level with a 92.8 percent completion rate. With a number of high-level results achieved, CNPC has developed 10 items of integrated technology.

New integrable models and analytical solutions in f (R ) cosmology with an ideal gas

Science.gov (United States)

Papagiannopoulos, G.; Basilakos, Spyros; Barrow, John D.; Paliathanasis, Andronikos

2018-01-01

In the context of f (R ) gravity with a spatially flat FLRW metric containing an ideal fluid, we use the method of invariant transformations to specify families of models which are integrable. We find three families of f (R ) theories for which new analytical solutions are given and closed-form solutions are provided.

TPACK Competencies and Technology Integration Self-Efficacy Perceptions of Pre-Service Teachers

Science.gov (United States)

Keser, Hafize; Karaoglan Yilmaz, Fatma Gizem; Yilmaz, Ramazan

2015-01-01

This study compared the technological pedagogical content knowledge (TPACK) competency of pre-service teachers with their self-efficacy perception towards technology integration, based on various variables; and the correlation between their TPACK competencies and self-efficacy perceptions towards technology integration were examined. The study…

The relationship between technology leadership roles and profiles of school principals and technology integration in primary school classrooms

OpenAIRE

Mustafa SAMANCIOĞLU; Murat BAĞLIBEL; Mahmut KALMAN; Mehmet SİNCAR

2015-01-01

The purpose of this study was to investigate the relationship between technology leadership behaviors of school principals and teachers’ level of technology integration, and to determine technology leadership profiles based on teacher views and examine their association with technology integration. The researchers administered two questionnaires to 352 teachers working at sixteen primary schools in a large city in southeastern Turkey. The results revealed a positive, but weak relationship bet...

Progress Report 16 for the period April-September 1980, and the proceedings of the 16th Project Integration Meeting

Energy Technology Data Exchange (ETDEWEB)

McDonald, R.R.

1980-01-01

Progress made by the Low-Cost Solar Array Project during the period April to September 1980, is reported in detail. Progress on project analysis and integration; technology development in silicon material, large-area silicon sheet and encapsulation; production process and equipment development; engineering, and operations is described. A report on, and copies of visual presentations made at, the Project Integration Meeting held September 24 and 25, 1980 are included.

The use of software agents and distributed objects to integrate enterprises: Compatible or competing technologies?

Energy Technology Data Exchange (ETDEWEB)

Pancerella, C.M.

1998-04-01

Distributed object and software agent technologies are two integration methods for connecting enterprises. The two technologies have overlapping goals--interoperability and architectural support for integrating software components--though to date little or no integration of the two technologies has been made at the enterprise level. The primary difference between these two technologies is that distributed object technologies focus on the problems inherent in connecting distributed heterogeneous systems whereas software agent technologies focus on the problems involved with coordination and knowledge exchange across domain boundaries. This paper addresses the integration of these technologies in support of enterprise integration across organizational and geographic boundaries. The authors discuss enterprise integration issues, review their experiences with both technologies, and make recommendations for future work. Neither technology is a panacea. Good software engineering techniques must be applied to integrate an enterprise because scalability and a distributed software development team are realities.

Road Service Performance Based On Integrated Road Design Consistency (IC Along Federal Road F0023

Directory of Open Access Journals (Sweden)

Zainal Zaffan Farhana

2017-01-01

Full Text Available Road accidents are one of the world’s largest public health and injury prevention problems. In Malaysia, the west coast area of Malaysia been stated as the highest motorcycle fatalities and road accidents are one of the factors that cause of death and injuries in this country. The most common fatal accident is between a motorcycle and passenger car. The most of the fatal accidents happened on Federal roads with 44 fatal accidents reported, which is equal to 29%. Lacks of road geometric designs consistency where the drivers make mistakes errors due to the road geometric features causes the accident kept rising in Malaysia. Hence, models are based on operating speed to calculate design consistency of road. The profiles were obtained by continuous speed profile using GPS data. The continuous operating speed profile models were plotted based on operating speed model (85th percentile. The study was conduct at F0023 from km 16 until km 20. The purpose of design consistency is to know the relationship between the operating speed and elements of geometric design on the road. As a result, the integrated design consistency motorcycle and cars along a segment at F0023, the threshold shows poor design quality for motorcycles and cars.

Technology management: case study of an integrated health system.

Science.gov (United States)

Dahl, D H; McFarlan, T K

1994-12-01

Technology management has assumed a role of vital importance in today's health care environment. Capital reserves and operating income have been stretched by pervasive and expensive technologies, while overall reimbursement has been reduced. It is imperative for hospitals to develop and consistently use technology management processes that begin prior to a technology's introduction in the hospital and continue throughout its life cycle. At Samaritan Health System (SHS), an integrated health care delivery system based in Phoenix, technology management provides tools to improve decision making and assist in the system's integration strategy as well as control expenses. SHS uses a systemwide technology-specific plan to guide acquisition and/or funding decisions. This plan describes how particular technologies can help achieve SHS' organizational goals such as promoting system integration and/or improving patient outcomes while providing good economic value. After technologies are targeted in this systemwide plan they are prioritized using a two-stage capital prioritization process. The first stage of the capital prioritization process considers the quantitative and qualitative factors critical for equitable capital distribution across the system. The second stage develops a sense of ownership among the parties that affect and are affected by the allocation at a facility level. This process promotes an efficient, effective, equitable, and defensible approach to resource allocation and technology decision making. Minimizing equipment maintenance expenditures is also an integral part of technology management at SHS. The keys to reducing maintenance expenditures are having a process in place that supports a routine fiscal evaluation of maintenance coverage options and ensuring that manufacturers are obligated to provide critical maintenance resources at the time of equipment purchase. Maintenance service options under consideration in this report include full

Integrated CMOS sensor technologies for the CLIC tracker

CERN Document Server

AUTHOR|(SzGeCERN)754303

2017-01-01

Integrated technologies are attractive candidates for an all silicon tracker at the proposed future multi-TeV linear e+e- collider CLIC. In this context CMOS circuitry on a high resistivity epitaxial layer has been studied using the ALICE Investigator test-chip. Test-beam campaigns have been performed to study the Investigator performance and a Technology Computer Aided Design based simulation chain has been developed to further explore the sensor technology.

Offshore platform integration and floatover technology

CERN Document Server

Liu, Gengshen

2017-01-01

This book discusses offshore platform integration technology, focusing on the floatover methodology and its applications. It also addresses topics related to safety and cost-effectiveness, as well as ensuring the success of a project through careful planning and established detailed operation procedure/working manuals, which are rarely found in the published literature. Unlike other publications in this area, the book not only includes details of technology development, but also presents real project cases in the discussion to make it more comprehensible. Each topic is illustrated with carefully created sketches to show the complex operation procedures. .

Physical Education Student Teachers' Technology Integration Self-Efficacy

Science.gov (United States)

Krause, Jennifer M.

2017-01-01

Pre- and in-service physical education teachers have evaluated themselves as not being very well prepared or proficient in technology use. Thus, better preparation of PE teachers to integrate technology is necessary. In this study, I examined the effects of technology-related mastery experiences, vicarious experiences, and social persuasion on…

Factors Relevant to Utility Integration of Intermittent Renewable Technologies

Energy Technology Data Exchange (ETDEWEB)

Wan, Y.; Parsons, B.

1993-08-24

This study assesses factors that utilities must address when they integrate intermittent renewable technologies into their power-supply systems; it also reviews the literature in this area and has a bibliography containing more than 350 listings. Three topics are covered: (1) interface (hardware and design-related interconnection), (2) operability/stability, and (3) planning. This study finds that several commonly held perceptions regarding integration of intermittent renewable energy technologies are not valid. Among fmdings of the study are the following: (1) hardware and system design advances have eliminated most concerns about interface, (2) cost penalties have not occurred at low to moderate penetration levels (and high levels am feasible); and (3) intermittent renewable energy technologies can have capacity values. Obstacles still interfering with intermittent renewable technologies are also indentified.

Factors relevant to utility integration of intermittent renewable technologies

Energy Technology Data Exchange (ETDEWEB)

Wan, Yih-huei; Parsons, B.K.

1993-08-01

This study assesses factors that utilities must address when they integrate intermittent renewable technologies into their power-supply systems; it also reviews the literature in this area and has a bibliography containing more than 350 listings. Three topics are covered: (1) interface (hardware and design-related interconnection), (2) operability/stability, and (3) planning. This study finds that several commonly held perceptions regarding integration of intermittent renewable energy technologies are not valid. Among findings of the study are the following: (1) hardware and system design advances have eliminated most concerns about interface; (2) cost penalties have not occurred at low to moderate penetration levels (and high levels are feasible); and (3) intermittent renewable energy technologies can have capacity values. Obstacles still interfering with intermittent renewable technologies are also identified.

Viral load and genomic integration of HPV 16 in cervical samples from HIV-1-infected and uninfected women in Burkina Faso.

Science.gov (United States)

Rousseau, Marie-Noelle Didelot; Costes, Valérie; Konate, Issouf; Nagot, Nicolas; Foulongne, Vincent; Ouedraogo, Abdoulaye; Van de Perre, Philippe; Mayaud, Philippe; Segondy, Michel

2007-06-01

The relationships between human papillomavirus type 16 (HPV 16) viral load, HPV 16 integration status, human immunodeficiency virus type 1 (HIV-1) status, and cervical cytology were studied among women enrolled in a cohort of female sex workers in Burkina Faso. The study focused on 24 HPV 16-infected women. The HPV 16 viral load in cervical samples was determined by real-time PCR. Integration ratio was estimated as the ratio between E2 and E6 genes DNA copy numbers. Integrated HPV16 viral load was defined as the product of HPV 16 viral load by the integration ratio. High HPV 16 viral load and high integration ratio were more frequent among women with squamous intraepithelial lesions compared with women with normal cytology (33% vs. 11%, and 33% vs. 0%, respectively), and among women with high-grade squamous intraepithelial lesions compared with women without high-grade squamous intraepithelial lesions (50% vs. 17%, and 50% vs. 11%, respectively). High HPV 16 DNA load, but not high integration ratio, was also more frequent among HIV-1-positive women (39% vs. 9%; and 23% vs. 18%, respectively). The absence of statistical significance of these differences might be explained by the small study sample size. High-integrated HPV 16 DNA load was significantly associated with the presence of high-grade squamous intraepithelial lesions (50% vs. 5%, P = 0.03) in univariate and multivariate analysis (adjusted odds-ratio: 19.05; 95% confidence interval (CI), 1.11-328.3, P = 0.03), but not with HIV-1 or other high-risk HPV types (HR-HPV). Integrated HPV 16 DNA load may be considered as a useful marker of high-grade cervical lesions in HPV 16-infected women. (c) 2007 Wiley-Liss, Inc.

Technology for Building Systems Integration and Optimization – Landscape Report

Energy Technology Data Exchange (ETDEWEB)

William Goetzler, Matt Guernsey, Youssef Bargach

2018-01-31

BTO's Commercial Building Integration (CBI) program helps advance a range of innovative building integration and optimization technologies and solutions, paving the way for high-performing buildings that could use 50-70% less energy than typical buildings. CBI’s work focuses on early stage technology innovation, with an emphasis on how components and systems work together and how whole buildings are integrated and optimized. This landscape study outlines the current body of knowledge, capabilities, and the broader array of solutions supporting integration and optimization in commercial buildings. CBI seeks to support solutions for both existing buildings and new construction, which often present very different challenges.

F4 quantum integrable, rational and trigonometric models: space-of-orbits view

International Nuclear Information System (INIS)

Turbiner, A V; Vieyra, J C Lopez

2014-01-01

Algebraic-rational nature of the four-dimensional, F 4 -invariant integrable quantum Hamiltonians, both rational and trigonometric, is revealed and reviewed. It was shown that being written in F 4 Weyl invariants, polynomial and exponential, respectively, both similarity-transformed Hamiltonians are in algebraic form, they are quite similar the second order differential operators with polynomial coefficients; the flat metric in the Laplace-Beltrami operator has polynomial (in invariants) matrix elements. Their potentials are calculated for the first time: they are meromorphic (rational) functions with singularities at the boundaries of the configuration space. Ground state eigenfunctions are algebraic functions in a form of polynomials in some degrees. Both Hamiltonians preserve the same infinite flag of polynomial spaces with characteristic vector (1, 2, 2, 3), it manifests exact solvability. A particular integral common for both models is derived. The first polynomial eigenfunctions are presented explicitly.

The integration of Information and Communication Technology into medical practice.

Science.gov (United States)

Lupiáñez-Villanueva, Francisco; Hardey, Michael; Torrent, Joan; Ficapal, Pilar

2010-07-01

To identify doctors' utilization of ICT; to develop and characterise a typology of doctors' utilization of ICT and to identify factors that can enhance or inhibit the use of these technologies within medical practice. An online survey of the 16,531 members of the Physicians Association of Barcelona who had a registered email account in 2006 was carried out. Factor analysis, cluster analysis and binomial logit model were undertaken. Multivariate statistics analysis of the 2199 responses obtained revealed two profiles of adoption of ICT. The first profile (38.61% of respondents) represents those doctors who place high emphasis on ICT within their practice. This group is thus referred to as 'integrated doctors'. The second profile (61.39% of respondents) represents those doctors who make less use of ICT so are consequently labelled 'non-integrated doctors'. From the statistical modelling, it was observed that an emphasis on international information; emphasis on ICT for research and medical practice; emphasis on information systems to consult and prescribe; undertaking teaching/research activities; a belief that the use of the Internet improved communication with patients and practice in both public and private health organizations play a positive and significant role in the probability of being an 'integrated doctor'. The integration of ICT within medical practice cannot be adequately understood and appreciated without examining how doctors are making use of ICT within their own practice, organizational contexts and the opportunities and constraints afforded by institutional, professional and patient expectations and demands. 2010 Elsevier Ireland Ltd. All rights reserved.

Prognostic value of pretreatment 18F-FDG PET/CT and human papillomavirus type 16 testing in locally advanced oropharyngeal squamous cell carcinoma

International Nuclear Information System (INIS)

Cheng, Nai-Ming; Yen, Tzu-Chen; Chang, Joseph Tung-Chieh; Tsan, Din-Li; Lin, Chien-Yu; Huang, Chung-Guei; Ng, Shu-Hang; Wang, Hung-Ming; Hsu, Cheng-Lung; Liao, Chun-Ta

2012-01-01

Human papillomavirus type 16 (HPV-16) positivity is associated with favourable survival in oropharyngeal squamous cell carcinoma (OPSCC). We report here a study of the prognostic significance of 18 F-FDG PET/CT functional parameters and HPV-16 infection in OPSCC patients. We retrospectively analysed 60 patients with stage III or IV OPSCC who had had a pretherapy 18 F-FDG PET/CT scan and had completed concurrent chemoradiotherapy (n = 58) or curative radiotherapy (n = 2). All patients were followed up for ≥24 months or until death. We determined total lesion glycolysis (TLG) and the maximal standardized uptake values (SUV max ) of the primary tumour and neck lymph nodes from the pretherapy 18 F-FDG PET/CT scan. Optimal cut-offs of the 18 F-FDG PET/CT parameters were obtained by receiver operating characteristic (ROC) curve analyses. Pretherapy tumour biopsies were studied by polymerase chain reaction to determine HPV infection status. The pretherapy tumour biopsies were positive for HPV-16 in 12 patients (20.0 %). Cox regression analyses revealed HPV-16 positivity and tumour TLG >135.3 g to be independently associated with overall survival (p = 0.027 and 0.011, respectively). However, only tumour TLG >135.3 g was independently associated with progression-free survival, disease-free survival and locoregional control (p = 0.011, 0.001 and 0.034, respectively). A scoring system was formulated to define distinct overall survival groups using tumour TLG and HPV-16 status. Patients positive for HPV-16 and with tumour TLG ≤135.3 g experienced better survival than those with tumour TLG >135.3 g and no HPV infection (p = 0.001). Tumour TLG was an independent predictor of survival in patients with locally advanced OPSCC. A scoring system was developed and may serve as a risk stratification strategy for guiding therapy. (orig.)

Seeing the System: Dynamics and Complexity of Technology Integration in Secondary Schools

Science.gov (United States)

Howard, Sarah K.; Thompson, Kate

2016-01-01

This paper introduces system dynamics modeling to understand, visualize and explore technology integration in schools, through the development of a theoretical model of technology-related change in teachers' practice. Technology integration is a dynamic social practice, within the social system of education. It is difficult, if not nearly…

Excitation functions of pion reactions on 14N, 16O, and 19F through the (3,3) resonance

International Nuclear Information System (INIS)

Jacob, N.P. Jr.; Markowitz, S.S.

1976-01-01

Cross sections for pion-induced reactions of the form (π,πN) and more complex spallation reactions of the form (π,X) have been measured from 50--550 MeV on the target nuclei 14 N, 16 O, and 19 F using the secondary pion beams at the Lawrence Berkeley Laboratory 184-inch synchrocyclotron and the Clinton P. Anderson Meson Physics Facility. The dominance of the (3,3) free-particle resonance is seen in all excitation functions determined in this work. Relative to the 12 C(π/sup plus-or-minus/,πN) 11 C reactions, the (π/sup plus-or-minus/,πN) reactions on 14 N, 16 O, and 19 F have magnitudes of 0.2, 1, and 0.7, respectively. The cross section ratio R=sigma (π - ,π - n)/sigma (π + ,π N) =1.68+-0.18 for 14 N at 188+-15 MeV, 1.68+-0.05 for 16 O at 188+-9 MeV, and 1.68+-0.03 for 19 F at 178+-2 MeV incident pion energy. The results from this work are compared to previous pion work, analogous proton-induced reactions, Monte Carlo intranuclear cascade-evaporation calculations, and to a semiclassical nucleon charge-exchange model which convincingly explains the (π,πN) reaction mechanism in the (3,3) resonance region

Syngeneic B16F10 Melanoma Causes Cachexia and Impaired Skeletal Muscle Strength and Locomotor Activity in Mice

Directory of Open Access Journals (Sweden)

Fabrício A. Voltarelli

2017-09-01

Full Text Available Muscle wasting has been emerging as one of the principal components of cancer cachexia, leading to progressive impairment of work capacity. Despite early stages melanomas rarely promotes weight loss, the appearance of metastatic and/or solid tumor melanoma can leads to cachexia development. Here, we investigated the B16F10 tumor-induced cachexia and its contribution to muscle strength and locomotor-like activity impairment. C57BL/6 mice were subcutaneously injected with 5 × 104 B16F10 melanoma cells or PBS as a Sham negative control. Tumor growth was monitored during a period of 28 days. Compared to Sham mice, tumor group depicts a loss of skeletal muscle, as well as significantly reduced muscle grip strength and epididymal fat mass. This data are in agreement with mild to severe catabolic host response promoted by elevated serum tumor necrosis factor-alpha (TNF-α, interleukin-6 (IL-6 and lactate dehydrogenase (LDH activity. Tumor implantation has also compromised general locomotor activity and decreased exploratory behavior. Likewise, muscle loss, and elevated inflammatory interleukin were associated to muscle strength loss and locomotor activity impairment. In conclusion, our data demonstrated that subcutaneous B16F10 melanoma tumor-driven catabolic state in response to a pro-inflammatory environment that is associated with impaired skeletal muscle strength and decreased locomotor activity in tumor-bearing mice.

Research and Technology at the John F. Kennedy Space Center 1993

Science.gov (United States)

1993-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1993 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. Major areas of research include material science, advanced software, industrial engineering, nondestructive evaluation, life sciences, atmospheric sciences, environmental technology, robotics, and electronics and instrumentation.

3D Integration of MEMS and IC: Design, technology and simulations

OpenAIRE

Schjølberg-Henriksen, Kari

2009-01-01

* 3D integration: Opportunities and trends* e-CUBES: Tire pressure monitoring system (TPMS)* Package design including thermo-mechanical modeling* Technology development* Sensor packaging concept* Gold stud bump bonding* Device characterization and testing* Summary and outlook 3D Integration of MEMS and IC: Design, technology and simulations

Synthesis, radiosynthesis and in vitro evaluation of 18F-Bodipy-C16/triglyceride as a dual modal imaging agent for brown adipose tissue.

Directory of Open Access Journals (Sweden)

Andreas Paulus

Full Text Available Brown adipose tissue research is in the focus in the field of endocrinology. We designed a dual-modal fluorescent/PET fatty acid based tracer on commercially available Bodipy-C16, which can be synthesized to its corresponding triglyceride and which combines the benefits of fluorescent and PET imaging.Bodipy-C16 was coupled to 1,3-diolein resulting in Bodipy-triglyceride. Bodipy-C16 and Bodipy-triglyceride compounds were radiolabeled with 18F using an 18F/19F exchange reaction to yield a dual-modal imaging molecule. Uptake of radiolabeled and non-labeled Bodipy-C16 and Bodipy-triglyceride was analyzed by fluorescence imaging and radioactive uptake in cultured adipocytes derived from human brown adipose tissue and white adipose tissue.Bodipy-C16 and Bodipy-triglyceride were successfully radiolabeled and Bodipy-C16 showed high shelf life and blood plasma stability (99% from 0-4 h. The uptake of Bodipy-C16 increased over time in cultured adipocytes, which was further enhanced after beta-adrenergic stimulation with norepinephrine. The uptake of Bodipy-C16 was inhibited by oleic acid and CD36 inhibitor sulfosuccinimidyl-oleate. The poor solubility of Bodipy-triglyceride did not allow stability or in vitro experiments.The new developed dual modal fatty acid based tracers Bodipy-C16 and Bodipy-triglyceride showed promising results to stimulate further in vivo evaluation and will help to understand brown adipose tissues role in whole body energy expenditure.

University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

Energy Technology Data Exchange (ETDEWEB)

Pendse, Hemant P.

2010-11-23

This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

Integrating Science and Technology: Using Technological Pedagogical Content Knowledge as a Framework to Study the Practices of Science Teachers

Science.gov (United States)

Pringle, Rose M.; Dawson, Kara; Ritzhaupt, Albert D.

2015-01-01

In this study, we examined how teachers involved in a yearlong technology integration initiative planned to enact technological, pedagogical, and content practices in science lessons. These science teachers, engaged in an initiative to integrate educational technology in inquiry-based science lessons, provided a total of 525 lesson plans for this…

An IRT Analysis of Preservice Teacher Self-Efficacy in Technology Integration

Science.gov (United States)

Browne, Jeremy

2011-01-01

The need for rigorously developed measures of preservice teacher traits regarding technology integration training has been acknowledged (Kay 2006), but such instruments are still extremely rare. The Technology Integration Confidence Scale (TICS) represents one such measure, but past analyses of its functioning have been limited by sample size and…

Area-wide integration of lepidopteran F1 sterility and augmentative biological control

International Nuclear Information System (INIS)

Carpenter, James E.

2000-01-01

Area-wide pest management (APM) and integrated pest management (IPM) originated from two different efforts to combine two or more control techniques into programmes in which each method could synergise the effectiveness of others and thus create a level of pest control that was greater than that of a single technique (Perkins 1982). Since then, the concept of APM has evolved to include many aspects of IPM and often is now referred to as area-wide IPM. Still, the element of total population management is central to this approach of insect pest management. In support of APM, Knipling (1998) stated that of the insect pests that were of major concern to agriculture before the newer classes of insecticides were available, most are still pests today, the major exceptions being the screw-worm fly and the boll weevil in the southeastern US cotton growing region. Knipling also noted that both of these pest species were subjected to area-wide suppression programmes. In response to the USDA IPM Initiative (USDA 1993, 1994) which seeks to achieve the national goal of having 75% of the crop acres under IPM by the year 2000, the Agricultural Research Service developed an Area-wide IPM Programme. This programme combines environmentally-sound pest control techniques with the advantages of APM and develops partnerships with other federal, state, local and private sector entities. Technologies such as the integration of lepidopteran F 1 sterility and augmentative biological control may be considered for future programmes

Smart Power: New power integrated circuit technologies and their applications

Science.gov (United States)

Kuivalainen, Pekka; Pohjonen, Helena; Yli-Pietilae, Timo; Lenkkeri, Jaakko

1992-05-01

Power Integrated Circuits (PIC) is one of the most rapidly growing branches of the semiconductor technology. The PIC markets has been forecast to grow from 660 million dollars in 1990 to 1658 million dollars in 1994. It has even been forecast that at the end of the 1990's the PIC markets would correspond to the value of the whole semiconductor production in 1990. Automotive electronics will play the leading role in the development of the standard PIC's. Integrated motor drivers (36 V/4 A), smart integrated switches (60 V/30 A), solenoid drivers, integrated switch-mode power supplies and regulators are the latest standard devices of the PIC manufactures. ASIC (Application Specific Integrated Circuits) PIC solutions are needed for the same reasons as other ASIC devices: there are no proper standard devices, a company has a lot of application knowhow, which should be kept inside the company, the size of the product must be reduced, and assembly costs are wished to be reduced by decreasing the number of discrete devices. During the next few years the most probable ASIC PIC applications in Finland will be integrated solenoid and motor drivers, an integrated electronic lamp ballast circuit and various sensor interface circuits. Application of the PIC technologies to machines and actuators will strongly be increased all over the world. This means that various PIC's, either standard PIC's or full custom ASIC circuits, will appear in many products which compete with the corresponding Finnish products. Therefore the development of the PIC technologies must be followed carefully in order to immediately be able to apply the latest development in the smart power technologies and their design methods.

A module concept for the upgrades of the ATLAS pixel system using the novel SLID-ICV vertical integration technology

CERN Document Server

Beimforde, M; Macchiolo, A; Moser, H G; Nisius, R; Richter, R H; Weigell, P; 10.1088/1748-0221/5/12/C12025

2010-01-01

The presented R&D activity is focused on the development of a new pixel module concept for the foreseen upgrades of the ATLAS detector towards the Super LHC employing thin n-in-p silicon sensors together with a novel vertical integration technology. A first set of pixel sensors with active thicknesses of 75 μm and 150 μm has been produced using a thinning technique developed at the Max-Planck-Institut für Physik (MPP) and the MPI Semiconductor Laboratory (HLL). Charge Collection Efficiency (CCE) measurements of these sensors irradiated with 26 MeV protons up to a particle fluence of 1016neqcm−2 have been performed, yielding higher values than expected from the present radiation damage models. The novel integration technology, developed by the Fraunhofer Institut EMFT, consists of the Solid-Liquid InterDiffusion (SLID) interconnection, being an alternative to the standard solder bump-bonding, and Inter-Chip Vias (ICVs) for routing signals vertically through electronics. This allows for extracting the ...

Integration thermal processes through Pinch technology

International Nuclear Information System (INIS)

Rios H, Carlos Mario; Grisales Rincon, Rogelio; Cardona, Carlos Ariel

2004-01-01

This paper presents the techniques of heat integration used for process optimization, their fortresses and weaknesses during the implementation in several specific process are also discussed. It is focused to the pinch technology, explaining algorithms for method applications in the industry. The paper provides the concepts and models involved in different types of commercial software applying this method for energy cost reduction, both in design of new plants and improve of old ones. As complement to benefits of the energy cost reduction it is analysed other favorable aspects of process integration, as the emissions waste reduction and the combined heat end power systems

Rural School Math and Science Teachers' Technology Integration Familiarization

Science.gov (United States)

Kalonde, Gilbert

2017-01-01

This study explored the significance of technology integration familiarization and the subsequent PD provided to rural middle school teachers with several opportunities to gain technological skills for technology use in rural middle school math and science classrooms. In order to explore the use of technology in rural schools, this study surveyed…

Phenomenological Investigation of Elementary School Teachers Who Successfully Integrated Instructional Technology into the Curriculum

Science.gov (United States)

Walker, Lori Raquel; Shepard, MaryFriend

2011-01-01

Technology integration in school curricula promotes student achievement, yet many teachers are not successfully integrating technology for learning. This phenomenological study explored the strategies of 10 elementary teachers in Georgia who overcame barriers to technology integration to successfully incorporate lessons within the public school…

How Accurately do Leading and Lagging Indictors Predict F-16 Aircraft Availability (AA)

Science.gov (United States)

2016-08-01

Availability Forecasting Metrics 19 Chapter Summary 20 Chapter IV: Methodology…...…………………………………………..………………..21 AU/ACSC/2016 iv Chapter...IPT or AIs , through the MRC PM, quarterly, until the chair of the MRC, in conjunction with the applicable SMEs closes the item. The F-16 is a...and cognizant owners of the part number or National Stock Number that the problem is associated to. IPTs and AIs are established and feedback from

Integrative Technologies Complicate Communication during Development Work Context: Industry-Academy Collaboration

Directory of Open Access Journals (Sweden)

Pauliina Mansikkamäki

2007-06-01

Full Text Available A competition in the electronics industry is hard. For most companies, strong technological know-how will be a competitiveness factor in the future. The future technologies will be increasingly based on a combination of innovations from several branches of science. Also, many innovations are based on external technology integration. The days are over when one company could internally create all of the technology it needs to maintain its competitiveness. One approach of promising framework for the development of a new integrative technology is an industrial R&D network combined with industrial-academic collaboration. However, this kind of collaboration is a challenging undertaking. Companies in a value network might have very different expectations regarding a new technology due to differences in their position in the value network or their company strategy. One of the main challenges in an R&D network is to translate the expectations of all parties involved into new technology solutions so that all in the R&D network feel they have obtained benefit. One of key factors on creating successful industrial-academic collaboration is open and trustful communication. But, there are communication challenges, intellectual property sharing problems, and discussions regarding the sharing of cost and benefits. Developing a new integrative technology structure requires seamless teamwork, holistic and interdisciplinary understanding, and open communication throughout the R&D team and the industrial-academic network. The focus of this paper is on network communication, knowledge communication and team communication. The results of this study indicate that successful communication in an industrial-academic R&D network to develop a new integrative technology improves knowledge creation and accelerates commercialization of the technology.

Factors Influencing the Integration of Technology by Community College Adjunct Faculty

Science.gov (United States)

Paver, Jonathan David

2012-01-01

This research examined the factors that predict intention to integrate technology into instruction by community college adjunct faculty. For this study the integration of technology was defined as beyond simple occasional use, within the next academic year. The decomposed theory of planned behavior was tested for its predictive ability with this…

Functional characterization of the gene FoOCH1 encoding a putative α-1,6-mannosyltransferase in Fusarium oxysporum f. sp. cubense.

Science.gov (United States)

Li, Min-Hui; Xie, Xiao-Ling; Lin, Xian-Feng; Shi, Jin-Xiu; Ding, Zhao-Jian; Ling, Jin-Feng; Xi, Ping-Gen; Zhou, Jia-Nuan; Leng, Yueqiang; Zhong, Shaobin; Jiang, Zi-De

2014-04-01

Fusarium oxysporum f. sp. cubense (FOC) is the causal agent of banana Fusarium wilt and has become one of the most destructive pathogens threatening the banana production worldwide. However, few genes related to morphogenesis and pathogenicity of this fungal pathogen have been functionally characterized. In this study, we identified and characterized the disrupted gene in a T-DNA insertional mutant (L953) of FOC with significantly reduced virulence on banana plants. The gene disrupted by T-DNA insertion in L953 harbors an open reading frame, which encodes a protein with homology to α-1,6-mannosyltransferase (OCH1) in fungi. The deletion mutants (ΔFoOCH1) of the OCH1 orthologue (FoOCH1) in FOC were impaired in fungal growth, exhibited brighter staining with fluorescein isothiocyanate (FITC)-Concanavalin A, had less cell wall proteins and secreted more proteins into liquid media than the wild type. Furthermore, the mutation or deletion of FoOCH1 led to loss of ability to penetrate cellophane membrane and decline in hyphal attachment and colonization as well as virulence to the banana host. The mutant phenotypes were fully restored by complementation with the wild type FoOCH1 gene. Our data provide a first evidence for the critical role of FoOCH1 in maintenance of cell wall integrity and virulence of F. oxysporum f. sp. cubense. Copyright © 2014 Elsevier Inc. All rights reserved.

Concise Review: Organ Engineering: Design, Technology, and Integration.

Science.gov (United States)

Kaushik, Gaurav; Leijten, Jeroen; Khademhosseini, Ali

2017-01-01

Engineering complex tissues and whole organs has the potential to dramatically impact translational medicine in several avenues. Organ engineering is a discipline that integrates biological knowledge of embryological development, anatomy, physiology, and cellular interactions with enabling technologies including biocompatible biomaterials and biofabrication platforms such as three-dimensional bioprinting. When engineering complex tissues and organs, core design principles must be taken into account, such as the structure-function relationship, biochemical signaling, mechanics, gradients, and spatial constraints. Technological advances in biomaterials, biofabrication, and biomedical imaging allow for in vitro control of these factors to recreate in vivo phenomena. Finally, organ engineering emerges as an integration of biological design and technical rigor. An overall workflow for organ engineering and guiding technology to advance biology as well as a perspective on necessary future iterations in the field is discussed. Stem Cells 2017;35:51-60. © 2016 AlphaMed Press.

Revisiting Teacher Adoption of Technology: Research Implications and Recommendations for Successful Full Technology Integration

Science.gov (United States)

Buckenmeyer, Janet

2008-01-01

Most teachers are still failing to fully integrate technologies in their classrooms to improve student achievement. If certain conditions exist, however, they are more likely to accept and use appropriate technologies in significant instructional ways. Relevant professional development and continuous access to needed resources are two significant…

Interactions of 16{alpha}-[{sup 18}F]-fluoroestradiol (FES) with sex steroid binding protein (SBP)

Energy Technology Data Exchange (ETDEWEB)

Tewson, T.J. E-mail: ttewson@u.washington.edu; Mankoff, D.A.; Peterson, L.M.; Woo, I.; Petra, P

1999-11-01

Fluorine-18 16{alpha}-Fluoroestradiol ([{sup 18}F]- FES) is a positron-emitting tracer for the estrogen receptor that is used for positron emission tomography (PET) studies of tumor tissues rich in the estrogen receptor. The role of the sex steroid binding protein (SBP or SHBG) in the transport of the [{sup 18}F]-FES to the estrogen-receptor-rich tissue in breast cancer patients in vivo was investigated. To determine the extent to which [{sup 18}F]-FES is bound to SBP in the blood, we performed a series of studies using blood samples obtained from patients undergoing [{sup 18}F]-FES PET scans. The binding of [{sup 18}F]-FES to the SBP was measured using a simple protein precipitation assay. The binding of [{sup 18}F]-FES metabolites to SBP was also measured. These measurements showed that the tracer was distributed between albumin and SBP, and the binding capacity of SBP was sufficient to ensure that the protein was not saturated when the tracer was fully mixed with the plasma; however, local saturation of SBP may occur when [{sup 18}F]-FES is administered intravenously. Typically about 45% of [{sup 18}F]-FES in circulating plasma was bound to SBP, but this fraction was dependent on the concentration of SBP in plasma. The transfer of the tracer between the two proteins was rapid, complete in less than 20 s at 0 deg. C, suggesting that the equilibrium was maintained under most circumstances and that local saturation resolved quickly when blood from the injection site entered the central circulation. These data suggest that SBP binding of [{sup 18}F]-FES is significant and will affect the input function of the tracer for any model that is used for the quantitative evaluation of [{sup 18}F]-FES uptake in PET studies. Estimates of equilibrium binding in blood samples are sufficient to characterize [{sup 18}F]-FES binding to SBP in the circulation.

Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

International Nuclear Information System (INIS)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

2004-02-01

The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

2004-02-15

The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

Melanogenesis inhibits respiration in B16-F10 melanoma cells whereas enhances mitochondrial cell content

International Nuclear Information System (INIS)

Meira, Willian Vanderlei; Heinrich, Tassiele Andréa; Cadena, Silvia Maria Suter Correia; Martinez, Glaucia Regina

2017-01-01

Melanoma is a rare and aggressive skin tumor; the survival of patients diagnosed late is fairly low. This high mortality rate is due to the characteristics of the cells that allow them to be resistant to radiotherapy and conventional chemotherapy, besides of being able to evade the immune system. Melanin, the pigment responsible for skin, hair and eye color, seems to be involved in this resistance. The main function of melanin is to protect the cells against ultraviolet (UV) light by absorbing this radiation and reactive oxygen species (ROS) scavenging. But this pigment may have also a role as photosensitizer, because when it is irradiated with UVA light (320-400 nm), the generation of ROS was detected. Besides, the melanogenesis stimulation on B16-F10 cells resulted in cell cycle arrest, induction of a quiescent state, change in the expression of several proteins and alterations on ADP/ATP ratio. The present study aimed to investigate the influence of melanogenesis stimulation in mitochondrial function of B16-F10 melanoma cells. Therefore, we analyzed cells respiration, mitochondrial membrane potential (Δψ_m) and mitochondria mass in B16-F10 melanoma cells stimulated with 0.4 mM L-tyrosine and 10 mM NH_4Cl. Our results showed that the induction of melanin synthesis was able to reduce significantly the oxygen consumption after 48 h of stimulation, without changes of mitochondrial membrane potential when compared to non-stimulated cells. Despite of respiration inhibition, the mitochondria mass was higher in cells with melanogenesis stimulation. We suggest that the stimulation in the melanin synthesis might be promoting the inhibition of electrons transport chain by some intermediate compound from the synthesis of the pigment and this effect could contribute to explain the entry in the quiescent state. - Highlights: • Melanoma pigmentation alters mitochondrial respiration. • Induction of melanin synthesis by 48 h do not change mitochondrial membrane potential

Melanogenesis inhibits respiration in B16-F10 melanoma cells whereas enhances mitochondrial cell content

Energy Technology Data Exchange (ETDEWEB)

Meira, Willian Vanderlei; Heinrich, Tassiele Andréa; Cadena, Silvia Maria Suter Correia; Martinez, Glaucia Regina, E-mail: grmartinez@ufpr.br

2017-01-01

Melanoma is a rare and aggressive skin tumor; the survival of patients diagnosed late is fairly low. This high mortality rate is due to the characteristics of the cells that allow them to be resistant to radiotherapy and conventional chemotherapy, besides of being able to evade the immune system. Melanin, the pigment responsible for skin, hair and eye color, seems to be involved in this resistance. The main function of melanin is to protect the cells against ultraviolet (UV) light by absorbing this radiation and reactive oxygen species (ROS) scavenging. But this pigment may have also a role as photosensitizer, because when it is irradiated with UVA light (320-400 nm), the generation of ROS was detected. Besides, the melanogenesis stimulation on B16-F10 cells resulted in cell cycle arrest, induction of a quiescent state, change in the expression of several proteins and alterations on ADP/ATP ratio. The present study aimed to investigate the influence of melanogenesis stimulation in mitochondrial function of B16-F10 melanoma cells. Therefore, we analyzed cells respiration, mitochondrial membrane potential (Δψ{sub m}) and mitochondria mass in B16-F10 melanoma cells stimulated with 0.4 mM L-tyrosine and 10 mM NH{sub 4}Cl. Our results showed that the induction of melanin synthesis was able to reduce significantly the oxygen consumption after 48 h of stimulation, without changes of mitochondrial membrane potential when compared to non-stimulated cells. Despite of respiration inhibition, the mitochondria mass was higher in cells with melanogenesis stimulation. We suggest that the stimulation in the melanin synthesis might be promoting the inhibition of electrons transport chain by some intermediate compound from the synthesis of the pigment and this effect could contribute to explain the entry in the quiescent state. - Highlights: • Melanoma pigmentation alters mitochondrial respiration. • Induction of melanin synthesis by 48 h do not change mitochondrial membrane

Development of FIR arrays with integrating amplifiers

Science.gov (United States)

Young, Erick T.

1988-08-01

The development of optimized photoconductor arrays suitable for far infrared space astronomical applications are described. Although the primary impetus is the production of a 16 by 16 element Ge:Ga demonstration array for SIRTF, the extension of this technology to Large Deployable Reflector (LDR) is considered. The optimization of Ge:Ga and Ge:Be photoconductor materials is discussed. In collaboration with Lawrence Berkeley Laboratory, measurements of FIR photoconductors with quantum efficiencies greater than 20 percent at 100 micrometers, and dark currents below 300 electrons/s are presented. Integrating J-FET amplifier technology is discussed. The current generation of integrating amplifiers has a demonstrated read noise of less than 20 electrons for an integration time of 100 s. The design is shown for a stackable 16 x n Ge:Ga array that utilizes a 16-channel monolithic version of the J-FET integrator. A part of the design is the use of a thin, thermally insulating substrate that allows the electronics to operate at the optimum temperature of 50 K while maintaining thermal and optical isolation from the detectors at 2 K. The power dissipation for the array is less than 16 mW. The array design may particularly be applicable to high resolution imaging spectrometers for LDR.

Ethanol extract of Lycoris radiata induces cell death in B16F10 melanoma via p38-mediated AP-1 activation.

Science.gov (United States)

Son, Minsik; Kim, Aeyung; Lee, Jaewoo; Park, Chul-Hong; Heo, Jin-Chul; Lee, Hyun-Jin; Lee, Sang-Han

2010-08-01

Some active alkaloids isolated from Lycoris, a bulbous perennial herb, was shown to possess various anti-tumor and anti-inflammatory activities. In this study, we evaluated the in vitro apoptotic effect of ethanol extract from Lycoris radiata (LRE) and further probed the underlying molecular mechanisms of LRE effects. The survival rate of B16F10 melanoma cells exposed to LRE was decreased in a dose-dependent manner, cell growth was retarded by arresting cell cycle at G1 phase and apoptotic appearance such as caspase-3 activation as well as DNA fragmentation was observed by LRE treatment. In addition, LRE induced p38 and c-Jun phosphorylation, followed by activation of transcription factor AP-1. Pretreatment with the p38 inhibitor (SB203580) blocked LRE-induced AP-1 transcriptional activity, and curcumin, AP-1 inhibitor, dramatically inhibited LRE-induced apoptosis in B16F10 melanoma cells. Our results collectively indicate that LRE-mediated apoptosis occurs through the activation of p38 and AP-1 pathway and potentially LRE exhibits anti-cancer activity against B16F10 melanoma cells.

Integrated Microelectronics and Photonics Active Cooling Technology (IMPACT)

National Research Council Canada - National Science Library

Bowers, John

2003-01-01

...) coolers and their integration with microelectronics and photonics. The majority of our research involves the development of this new technology through nanostructured materials design and growth...

Affordable Integrated Technology Projects Science Education towards New Horizons

Science.gov (United States)

Paoletti, Franco; Carlucci, Lisa Marie

2009-03-01

The new-era concept of education supports a type of instruction whereby technology directly acts as a conduit of change, fundamentally altering what is learned, how it is learned, and the role of the educator in the classroom. In our current world, the learning about technology itself has become a goal and a means to successful participation in today's society. Efficient integration of technology to enhance and support the educational process will: 1) provide educators with the resources and the freedom to actualize innovative educational programs; 2) allow educators to be successful in challenging each student to reach his/her highest potential to ultimately increase academic achievement. This study analyzes what technology integration into education means identifying the benefits and the challenges that educators need to meet in order to be successful in their efforts while providing examples of how to successfully implement effective programs under budgetary constraints.

The Teacher Technology Integration Experience: Practice and Reflection in the Classroom

Directory of Open Access Journals (Sweden)

Dana Ruggiero

2015-05-01

Full Text Available Previous studies indicated that the technology integration practices of teachers in the classroom often did not match their teaching styles. Researchers concluded that this was due, at least partially, to external barriers that prevented teachers from using technology in ways that matched their practiced teaching style. Many of these barriers, such as professional support and access to hardware and software, have been largely diminished over the last twenty years due to an influx of money and strategies for enhancing technology in primary and secondary schools in the United States. This mixed-methods research study was designed to examine the question, “What technology do teachers use and how do they use that technology to facilitate student learning?” K-12 classroom teachers were purposefully selected based on their full-time employment in a public, private, or religious school in a Midwestern state in the United States, supported by the endorsement of a school official. There were 1048 teachers from over 100 school corporations who completed an online survey consisting of six questions about classroom technology tools and professional development involving technology. Survey results suggest that technology integration is pervasive in the classroom with the most often used technology tool identified as PowerPoint. Moreover, teachers identified that training about technology is most effective when it is contextually based in their own classroom. Follow-up interviews were conducted with ten percent (n=111 of the teachers in order to examine the relationship between teachers’ daily classroom use of technology and their pedagogical practices. Results suggest a close relationship; for example, teachers with student-centric technology activities were supported by student-centric pedagogical practices in other areas. Moreover, teachers with strongly student-centered practices tended to exhibit a more pronounced need to create learning

Environment, safety, and health information technology systems integration.

Energy Technology Data Exchange (ETDEWEB)

Hendrickson, David A.; Bayer, Gregory W.

2006-02-01

The ES&H Information Systems department, motivated by the numerous isolated information technology systems under its control, undertook a significant integration effort. This effort was planned and executed over the course of several years and parts of it still continue today. The effect was to help move the ES&H Information Systems department toward integration with the corporate Information Solutions and Services center.

Applications of a Case Library of Technology Integration Stories for Teachers

Science.gov (United States)

Wang, Feng-Kwei; Jonassen, David H.; Strobel, Johannes; Cernusca, Dawn

2003-01-01

Stories are the most natural form of communication and learning among humans. In this paper, we describe how we have designed and implemented an case library of technology integration stories to support pre-service and in-service teachers learning how to integrate technologies into their teaching. The case library was built using the artificial…

Prognostic value of pretreatment {sup 18}F-FDG PET/CT and human papillomavirus type 16 testing in locally advanced oropharyngeal squamous cell carcinoma

Energy Technology Data Exchange (ETDEWEB)

Cheng, Nai-Ming; Yen, Tzu-Chen [Chang Gung University College of Medicine, Department of Nuclear Medicine and Molecular Imaging Center, Chang Gung Memorial Hospital, Taipei (China); Chang, Joseph Tung-Chieh; Tsan, Din-Li; Lin, Chien-Yu [Chang Gung University College of Medicine, Department of Radiation Oncology, Chang Gung Memorial Hospital, Taipei (China); Huang, Chung-Guei [Chang Gung Memorial Hospital and Chang Gung University College of Medicine, Department of Laboratory Medicine, Taipei (China); Ng, Shu-Hang [Chang Gung University College of Medicine, Department of Diagnostic Radiology, Chang Gung Memorial Hospital, Taipei (China); Wang, Hung-Ming; Hsu, Cheng-Lung [Chang Gung University College of Medicine, Division of Hematology/Oncology, Department of Internal Medicine, Chang Gung Memorial Hospital, Taipei (China); Liao, Chun-Ta [Chang Gung University College of Medicine, Department of Otolaryngology-Head and Neck Surgery, Chang Gung Memorial Hospital, Taipei (China)

2012-11-15

Human papillomavirus type 16 (HPV-16) positivity is associated with favourable survival in oropharyngeal squamous cell carcinoma (OPSCC). We report here a study of the prognostic significance of {sup 18}F-FDG PET/CT functional parameters and HPV-16 infection in OPSCC patients. We retrospectively analysed 60 patients with stage III or IV OPSCC who had had a pretherapy {sup 18}F-FDG PET/CT scan and had completed concurrent chemoradiotherapy (n = 58) or curative radiotherapy (n = 2). All patients were followed up for {>=}24 months or until death. We determined total lesion glycolysis (TLG) and the maximal standardized uptake values (SUV{sub max}) of the primary tumour and neck lymph nodes from the pretherapy {sup 18}F-FDG PET/CT scan. Optimal cut-offs of the {sup 18}F-FDG PET/CT parameters were obtained by receiver operating characteristic (ROC) curve analyses. Pretherapy tumour biopsies were studied by polymerase chain reaction to determine HPV infection status. The pretherapy tumour biopsies were positive for HPV-16 in 12 patients (20.0 %). Cox regression analyses revealed HPV-16 positivity and tumour TLG >135.3 g to be independently associated with overall survival (p = 0.027 and 0.011, respectively). However, only tumour TLG >135.3 g was independently associated with progression-free survival, disease-free survival and locoregional control (p = 0.011, 0.001 and 0.034, respectively). A scoring system was formulated to define distinct overall survival groups using tumour TLG and HPV-16 status. Patients positive for HPV-16 and with tumour TLG {<=}135.3 g experienced better survival than those with tumour TLG >135.3 g and no HPV infection (p = 0.001). Tumour TLG was an independent predictor of survival in patients with locally advanced OPSCC. A scoring system was developed and may serve as a risk stratification strategy for guiding therapy. (orig.)

Compact, Low-Power, and High-Speed Graphene-Based Integrated Photonic Modulator Technology

Science.gov (United States)

2017-11-02

Compact, Low-Power, and High-Speed Graphene- Based Integrated Photonic Modulator Technology The views, opinions and/or findings contained in this...Graphene-Based Integrated Photonic Modulator Technology Report Term: 0-Other Email: sorger@gwu.edu Distribution Statement: 1-Approved for public release...which is an all-time record at Georgia Tech. Protocol Activity Status: Technology Transfer: Nothing to Report PARTICIPANTS: Person Months Worked

Mixed Waste Integrated Program emerging technology development

International Nuclear Information System (INIS)

Berry, J.B.; Hart, P.W.

1994-01-01

The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m 3 of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development's Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW

Integrating Records Management (RM) and Information Technology (IT)

Energy Technology Data Exchange (ETDEWEB)

NUSBAUM,ANNA W.; CUSIMANO,LINDA J.

2000-03-02

Records Managers are continually exploring ways to integrate their services with those offered by Information Technology-related professions to capitalize on the advantages of providing customers a total solution to managing their records and information. In this day and age, where technology abounds, there often exists a fear on the part of records management that this integration will result in a loss of identity and the focus of one's own mission - a fear that records management may become subordinated to the fast-paced technology fields. They need to remember there is strength in numbers and it benefits RM, IT, and the customer when they can bring together the unique offerings each possess to reach synergy for the benefit of all the corporations. Records Managers, need to continually strive to move ''outside the records management box'', network, expand their knowledge, and influence the IT disciplines to incorporate the concept of ''management'' into their customer solutions.

Integrating technology in a changing organisation

International Nuclear Information System (INIS)

Guillon, O.

1996-01-01

The paper relates to integrating technology in a changing organisation of Elf Aquitaine. There is a strong pressure to cut costs and be more effective in the company's operations. A process was initiated in 1994 to re-analyse its E and P (Exploration and Production) research and development (R and D) in order to enhance its alignment with the company assets needs, with a subsequent prioritization of R and D projects. The integration included a strategy for cooperation with other oil and service companies. The author presents the process set up to align the company's R and D program to the business needs of its operations, the various levels of cooperation used, and finally an illustration, in the domain of the geosciences, of the various facets of the ongoing cultural revolution which is required to reach a true integration. 11 figs

Technology Integration in a Science Classroom: Preservice Teachers' Perceptions

Science.gov (United States)

Rehmat, Abeera P.; Bailey, Janelle M.

2014-01-01

The challenge of preparing students for the information age has prompted administrators to increase technology in the public schools. Yet despite the increased availability of technology in schools, few teachers are integrating technology for instructional purposes. Preservice teachers must be equipped with adequate content knowledge of technology…

Integrating Educational Technologies into Teacher Education: A Case Study

Science.gov (United States)

Rawlins, Peter; Kehrwald, Benjamin

2014-01-01

This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

20th May 2010 - Malaysian Minister for Science, Technology and Innovation H. F: B. H. Yusof signing the guest book with Coordinator for External Relations F. Pauss and CMS Collaboration Deputy Spokesperson A. De Roeck; visiting the LHC superconducting magnet test hall with Technology Department Head F. Bordry; throughout accompanied by CERN Advisers J. Ellis and E. Tsesmelis.

CERN Document Server

Maximilien brice

2010-01-01

20th May 2010 - Malaysian Minister for Science, Technology and Innovation H. F: B. H. Yusof signing the guest book with Coordinator for External Relations F. Pauss and CMS Collaboration Deputy Spokesperson A. De Roeck; visiting the LHC superconducting magnet test hall with Technology Department Head F. Bordry; throughout accompanied by CERN Advisers J. Ellis and E. Tsesmelis.

Interactive Garments: Flexible Technologies for Textile Integration

OpenAIRE

Anupam Bhatia

2016-01-01

Upon reviewing the literature and the pragmatic work done in the field of E- textiles, it is observed that the applications of wearable technologies have found a steady growth in the field of military, medical, industrial, sports; whereas fashion is at a loss to know how to treat this technology and bring it to market. The purpose of this paper is to understand the practical issues of integration of electronics in garments; cutting patterns for mass production, maintaining the basic propertie...

Integrative Production Technology for High-Wage Countries

CERN Document Server

2012-01-01

Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of ...

Integration of Smart Grid Technologies in Households

DEFF Research Database (Denmark)

Friis, Freja; Gram-Hanssen, Kirsten

2013-01-01

This article considers the interplay between new smart grid technologies and households everyday practices. The research focuses on how Electric Vehicles (EVs) and Dynamic Pricing influence on Danish households’ everyday life and how these technologies constitutes and change routines and practice...... to a more complex and multiple consideration of the interplay between households’ social practices and new smart grid technologies - and thereby helps to fill out the lack of research on the integration of peak-shaving technologies in the end-user design.......This article considers the interplay between new smart grid technologies and households everyday practices. The research focuses on how Electric Vehicles (EVs) and Dynamic Pricing influence on Danish households’ everyday life and how these technologies constitutes and change routines and practices......, is analysed from the analytical concept offered by the Social Practice Theory. Overall, the case-study demonstrates that the smart grid technologies influence the ‘way of driving’ and changed the temporal patterns of consumption in the families during the test-period. The inquiry attempts to contribute...

Integrated optics theory and technology

CERN Document Server

Hunsperger, Robert G

1984-01-01

Our intent in producing this book was to provide a text that would be comprehensive enough for an introductory course in integrated optics, yet concise enough in its mathematical derivations to be easily readable by a practicing engineer who desires an overview of the field. The response to the first edition has indeed been gratifying; unusually strong demand has caused it to be sold out during the initial year of publication, thus providing us with an early opportunity to produce this updated and improved second edition. This development is fortunate, because integrated optics is a very rapidly progressing field, with significant new research being regularly reported. Hence, a new chapter (Chap. 17) has been added to review recent progress and to provide numerous additional references to the relevant technical literature. Also, thirty-five new problems for practice have been included to supplement those at the ends of chapters in the first edition. Chapters I through 16 are essentially unchanged, except for ...

Effect of simulated in-flight thrust reversing on vertical-tail loads of F-18 and F-15 airplane models. [conducted in the Langley 16-foot transonic tunnel

Science.gov (United States)

Bare, E. A.; Berrier, B. L.; Capone, F. J.

1981-01-01

Investigations were conducted in the Langley 16-Foot Transonic Tunnel to provide data on a 0.10-scale model of the prototype F-18 airplane and a 0.047-scale model of the F-15 three-surface configuration (canard, wing, and horizontal tails). Test data were obtained at static conditions and at Mach numbers from 0.6 to 1.2 over an angle-of-attack range from 2 deg to 15 deg. Nozzle pressure ratio was varied from jet off to about 8.0.

High CpG island methylation of p16 gene and loss of p16 protein ...

Indian Academy of Sciences (India)

The study subjects consisted of 75 healthy ... that p16 protein expression was significantly lower in ToF group compared to ... in p16 promoters in ToF patients was negatively correlated with p16 protein ... studies, human foetal ventricular cardiomyocytes (HFCs) are ..... oral epithelial dysplasia: a prospective cohort study.

Pre-service teachers' competencies for technology integration: Insights from a mathematics-specific instructional technology course

NARCIS (Netherlands)

Agyei, D.D.; Voogt, Joke; Resta, P.

2012-01-01

A combination of various measures (self-report, learning outcomes and written reports) was employed to investigate 104 pre-service teachers’ competencies in spreadsheet integration after enrolling in an Instructional Technology course. The pre-service teachers engaged in a “learning technology by

Redesigning Technology Integration into World Language Education

Science.gov (United States)

Rodríguez, Julio C.

2018-01-01

This article describes how a multi-institutional, proficiency-based program engages stakeholders in design thinking to discover and explore solutions to perennial problems in technology integration into world language education (WLE). Examples of replicable activities illustrate the strategies used to fuel innovation efforts, including fostering…

Monolithic Microwave Integrated Circuit (MMIC) technology for space communications applications

Science.gov (United States)

Connolly, Denis J.; Bhasin, Kul B.; Romanofsky, Robert R.

1987-01-01

Future communications satellites are likely to use gallium arsenide (GaAs) monolithic microwave integrated-circuit (MMIC) technology in most, if not all, communications payload subsystems. Multiple-scanning-beam antenna systems are expected to use GaAs MMIC's to increase functional capability, to reduce volume, weight, and cost, and to greatly improve system reliability. RF and IF matrix switch technology based on GaAs MMIC's is also being developed for these reasons. MMIC technology, including gigabit-rate GaAs digital integrated circuits, offers substantial advantages in power consumption and weight over silicon technologies for high-throughput, on-board baseband processor systems. For the more distant future pseudomorphic indium gallium arsenide (InGaAs) and other advanced III-V materials offer the possibility of MMIC subsystems well up into the millimeter wavelength region. All of these technology elements are in NASA's MMIC program. Their status is reviewed.

Integration of Information Technologies in Enterprise Application Development

Directory of Open Access Journals (Sweden)

Iulia SURUGIU

2012-05-01

Full Text Available Healthcare enterprises are disconnected. In the era of integrated information systems and Internet explosion, the necessity of information systems integration reside from business process evolution, on the one hand, and from information technology tendencies, on the other hand. In order to become more efficient and adaptive to change, healthcare organizations are tremendously preoccupied of business process automation, flexibility and complexity. The need of information systems integration arise from these goals, explaining, at the same time, the special interest in EAI. Extensible software integration architectures and business orientation of process modeling and information systems functionalities, the same as open-connectivity, accessibility and virtualization lead to most suitable integration solutions: SOA and BPM architectural styles in a cloud computing environment.

Undergraduate Teacher Candidate Perceptions Integrating Technology in Classroom Instruction

Science.gov (United States)

Anderson, Charlise Askew

2016-01-01

The purpose of this study was to analyze undergraduate teacher candidates' perceptions on integrating technology in the classroom. The study was embedded in the "Technology Pedagogical Content Knowledge" theoretical model. A sample of 143 undergraduate teacher candidates participated in the study. They were asked to address items on a…

Integrated STEM: A New Primer for Teaching Technology Education

Science.gov (United States)

Asunda, Paul A.; Mativo, John

2017-01-01

Part One of this article ("Technology and Engineering Teacher," 75(4), December/January, 2016) presented a process that science, math, engineering, and technology teachers could use to collaborate and design integrated STEM courses. A conceptual framework was discussed that could provide a premise that educators interested in delivery of…

Organizational Support of Technology Integration in One School in Lebanon

Science.gov (United States)

Zgheib, Rosine S.

2013-01-01

Technology has been at the center of heated debates in educational settings driving schools to compete for the best technological equipments. However, in Lebanon there is a lag in technology integration matching twenty first century advances. Several barriers related to teacher attitudes, lack of technical skills and organizational constraints to…

Brain network segregation and integration during an epoch-related working memory fMRI experiment.

Science.gov (United States)

Fransson, Peter; Schiffler, Björn C; Thompson, William Hedley

2018-05-17

The characterization of brain subnetwork segregation and integration has previously focused on changes that are detectable at the level of entire sessions or epochs of imaging data. In this study, we applied time-varying functional connectivity analysis together with temporal network theory to calculate point-by-point estimates in subnetwork segregation and integration during an epoch-based (2-back, 0-back, baseline) working memory fMRI experiment as well as during resting-state. This approach allowed us to follow task-related changes in subnetwork segregation and integration at a high temporal resolution. At a global level, the cognitively more taxing 2-back epochs elicited an overall stronger response of integration between subnetworks compared to the 0-back epochs. Moreover, the visual, sensorimotor and fronto-parietal subnetworks displayed characteristic and distinct temporal profiles of segregation and integration during the 0- and 2-back epochs. During the interspersed epochs of baseline, several subnetworks, including the visual, fronto-parietal, cingulo-opercular and dorsal attention subnetworks showed pronounced increases in segregation. Using a drift diffusion model we show that the response time for the 2-back trials are correlated with integration for the fronto-parietal subnetwork and correlated with segregation for the visual subnetwork. Our results elucidate the fast-evolving events with regard to subnetwork integration and segregation that occur in an epoch-related task fMRI experiment. Our findings suggest that minute changes in subnetwork integration are of importance for task performance. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Teaching for Application: A Model for Assisting Pre-Service Teachers with Technology Integration

Science.gov (United States)

Hur, Jung Won; Cullen, Theresa; Brush, Thomas

2010-01-01

The purpose of this paper is to introduce a technology integration model designed to assist pre-service teachers to learn meaningful uses of technology in K-12 classrooms. Based on studies in teacher education, learning theory, and technology integration, the authors define five essential characteristics necessary for pre-service teacher…

Remaining Sites Verification Package for the 116-F-16, PNL Outfall and the 100-F-43, PNL Outfall Spillway. Attachment to Waste Site Reclassification Form 2006-039 and 2006-096

International Nuclear Information System (INIS)

Dittmer, L.M.

2006-01-01

The 116-F-16 waste site is the former Pacific National Laboratories (PNL) Outfall, used to discharge waste effluents from the 100-F Experimental Animal Farm. The results of verification sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River

Integration Of Innovative Technologies And Affective Teaching amp Learning In Programming Courses

Directory of Open Access Journals (Sweden)

Alvin Prasad

2015-08-01

Full Text Available Abstract Technology has been integral component in the teaching and learning process in this millennium. In this review paper we evaluate the different technologies which are used to currently facilitate the teaching and learning of computer programming courses. The aim is to identify problems or gaps in technology usage in the learning environment and suggest affective solutions for technology integration into programming courses at the University levels in the future. We believe that with the inclusion of suggested innovative technologies and affective solutions in programming courses teaching and learning will be attractive and best for the programming industry.

Development of a mechanical maintenance training simulator in OpenSimulator for F-16 aircraft engines

OpenAIRE

Pinheiro, André; Fernandes, Paulo; Maia, Ana; Cruz, Gonçalo; Pedrosa, Daniela; Fonseca, Benjamim; Paredes, Hugo; Martins, Paulo; Morgado, Leonel; Rafael, Jorge

2014-01-01

Mechanical maintenance of F-16 engines is carried out as a team effort involving 3–4 skilled engine technicians, but the details of its procedures and requisites change constantly, to improve safety, optimize resources, and respond to knowledge learned from field outcomes. This provides a challenge for development of training simulators, since simulated actions risk becoming obsolete rapidly and require costly reimplementation. This paper presents the development of a 3D mechanical maintenanc...

Systematic framework for the efficient integration of wind technologies into buildings

Directory of Open Access Journals (Sweden)

Ashraf A. ELMokadem

2016-03-01

Full Text Available The renewed interest that is being paid by architects, project developers and local governments to integrate wind turbines with buildings is mainly required a framework to unify much data, criteria and variables to ease the design process to many architects. Therefore, this paper introduces and elaborates the systematic framework towards the efficient integration of wind technologies into new building. Moreover, it evaluates the framework effectiveness by comparing the current status of wind technologies integration into a building with the suggested status if the framework is followed.

Sustaining high energy efficiency in existing processes with advanced process integration technology

International Nuclear Information System (INIS)

Zhang, Nan; Smith, Robin; Bulatov, Igor; Klemeš, Jiří Jaromír

2013-01-01

Highlights: ► Process integration with better modelling and more advanced solution methods. ► Operational changes for better environmental performance through optimisation. ► Identification of process integration technology for operational optimisation. ► Systematic implementation procedure of process integration technology. ► A case study with crude oil distillation to demonstrate the operational flexibility. -- Abstract: To reduce emissions in the process industry, much emphasis has been put on making step changes in emission reduction, by developing new process technology and making renewable energy more affordable. However, the energy saving potential of existing systems cannot be simply ignored. In recent years, there have been significant advances in process integration technology with better modelling techniques and more advanced solution methods. These methods have been applied to the new design and retrofit studies in the process industry. Here attempts are made to apply these technologies to improve the environmental performance of existing facilities with operational changes. An industrial project was carried out to demonstrate the importance and effectiveness of exploiting the operational flexibility for energy conservation. By applying advanced optimisation technique to integrate the operation of distillation and heat recovery in a crude oil distillation unit, the energy consumption was reduced by 8% without capital expenditure. It shows that with correctly identified technology and the proper execution procedure, significant energy savings and emission reduction can be achieved very quickly without major capital expenditure. This allows the industry to improve its economic and environment performance at the same time.

Information Technology Integration in Higher Education: A Novel Approach for Impact Assessment

Directory of Open Access Journals (Sweden)

Abdulkareem Al-Alwani

2014-12-01

Full Text Available In the current technological world of Information services, academic systems are also in the process of adapting information technology solutions. Information systems vary for different applications and specifically in academia domain, a range of information systems are available for different institutions worldwide. Integration of e-learning can optimize implementation of computer-based and computer-assisted educational processes at all levels. Therefore it is imperative to assess and evaluate integration of these information systems because they have serious impact on e-learning processes. In this study an instrument survey is presented for evaluating integration of information technology systems and practices in an educational environment. Survey is constructed using descriptive questions related to information technology tools to assess qualitative impact and usage of such tools. Critical feedback, analysis and suggestions from 25 educationists played a pivotal role in finalizing proposed survey questionnaire. A subsequent test evaluation by teachers and students is also carried out to assess adequate utilization of information systems in Yanbu University College. The results showed that feedback using this survey can help in identifying technological gaps and facilitate effective integration of information technology in an educational environment. Survey instrument proposed in this research can greatly enhance integration of IT tools as it can identify shortcomings by collecting statistical data from feedback of both faculty and students. Solution to these problems is deterministic and can be easily implemented to optimize overall performance of e-learning systems.

Toward a procedure for integrating moral issues in health technology assessment.

Science.gov (United States)

Hofmann, Bjørn

2005-01-01

Although ethics has been on the agenda in health technology assessment (HTA) since its inception, the integration of moral issues is still not standard and is performed in a vast variety of ways. Therefore, there is a need for a procedure for integrating moral issues in HTA. Literature review of existing approaches together with application of various theories in moral philosophy and axiology. The article develops a set of questions that addresses a wide range of moral issues related to the assessment and implementation of health technology. The issues include general moral issues and moral issues related to stakeholders, methodology, characteristics of technology, and to the HTA process itself. The questions form a kind of checklist for use in HTAs. The presented approach for integrating moral issues in HTA has a broad theoretical foundation and has shown to be useful in practice. Integrating ethical issues in HTAs can be of great importance with respect to the dissemination of HTA results and in efficient health policy making.

Examining Changes of Preservice Teachers' Beliefs about Technology Integration during Student Teaching

Science.gov (United States)

Hsu, Pi-Sui

2013-01-01

The purpose of this qualitative case study was to examine changes in preservice teachers' beliefs about technology integration during the student teaching semester in USA. This study used in-depth interviews, review of documents, and observations. The findings indicated the preservice teachers' beliefs about technology integration changed in two…

In Situ Remediation Integrated Program, Evaluation and assessment of containment technology

International Nuclear Information System (INIS)

Gerber, M.A.; Fayer, M.J.

1994-04-01

The In Situ Remediation Integrated Program (ISRIP) was established by the US Department of Energy (DOE) to advance the state-of-the art of innovative in situ remediation technologies to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. This program complements similar ongoing integrated demonstration programs being conducted at several DOE sites. The ISRIP has been conducting baseline assessments on in situ technologies to support program planning. Pacific Northwest Laboratory conducted an assessment and evaluation of subsurface containment barrier technology in support of ISRIP's Containment Technology Subprogram. This report summarizes the results of that activity and provides a recommendation for priortizing areas in which additional research and development is needed to advance the technology to the point of demonstration in support of DOE's site restoration activities

Sources of capabilities, integration and technology commercialization

DEFF Research Database (Denmark)

Zahra, Shaker A.; Nielsen, Anders

2002-01-01

In recent years, companies have increased their use of internal and external sources in pursuit of a competitive advantage through the effective and timely commercialization of new technology. Grounded in the resource-based view of the firm, this study examines the effect of a company's use...... of internal and external sources on multiple dimensions of successful technology commercialization (TC). The study also explores the moderating role of formal vs. informal integration mechanisms on these relationships. Applying a longitudinal design and data from 119 companies, the results show that internal...

Mixed Waste Integrated Program emerging technology development

Energy Technology Data Exchange (ETDEWEB)

Berry, J.B. [Oak Ridge National Lab., TN (United States); Hart, P.W. [USDOE, Washington, DC (United States)

1994-06-01

The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m{sup 3} of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development`s Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW.

Cytosolic DNA Sensor Upregulation Accompanies DNA Electrotransfer in B16.F10 Melanoma Cells

Directory of Open Access Journals (Sweden)

Katarina Znidar

2016-01-01

Full Text Available In several preclinical tumor models, antitumor effects occur after intratumoral electroporation, also known as electrotransfer, of plasmid DNA devoid of a therapeutic gene. In mouse melanomas, these effects are preceded by significant elevation of several proinflammatory cytokines. These observations implicate the binding and activation of intracellular DNA-specific pattern recognition receptors or DNA sensors in response to DNA electrotransfer. In tumors, IFNβ mRNA and protein levels significantly increased. The mRNAs of several DNA sensors were detected, and DAI, DDX60, and p204 tended to be upregulated. These effects were accompanied with reduced tumor growth and increased tumor necrosis. In B16.F10 cells in culture, IFNβ mRNA and protein levels were significantly upregulated. The mRNAs for several DNA sensors were present in these cells; DNA-dependent activator of interferon regulatory factor (DAI, DEAD (Asp-Glu-Ala-Asp box polypeptide 60 (DDX60, and p204 were significantly upregulated while DDX60 protein levels were coordinately upregulated. Upregulation of DNA sensors in tumors could be masked by the lower transfection efficiency compared to in vitro or to dilution by other tumor cell types. Mirroring the observation of tumor necrosis, cells underwent a significant DNA concentration-dependent decrease in proliferation and survival. Taken together, these results indicate that DNA electrotransfer may cause the upregulation of several intracellular DNA sensors in B16.F10 cells, inducing effects in vitro and potentially in vivo.

Implementation of multi-layer feed forward neural network on PIC16F877 microcontroller

International Nuclear Information System (INIS)

Nur Aira Abd Rahman

2005-01-01

Artificial Neural Network (ANN) is an electronic model based on the neural structure of the brain. Similar to human brain, ANN consists of interconnected simple processing units or neurons that process input to generate output signals. ANN operation is divided into 2 categories; training mode and service mode. This project aims to implement ANN on PIC micro-controller that enable on-chip or stand alone training and service mode. The input can varies from sensors or switches, while the output can be used to control valves, motors, light source and a lot more. As partial development of the project, this paper reports the current status and results of the implemented ANN. The hardware fraction of this project incorporates Microchip PIC16F877A microcontrollers along with uM-FPU math co-processor. uM-FPU is a 32-bit floating point co-processor utilized to execute complex calculation requires by the sigmoid activation function for neuron. ANN algorithm is converted to software program written in assembly language. The implemented ANN structure is three layer with one hidden layer, and five neurons with two hidden neurons. To prove the operability and functionality, the network is trained to solve three common logic gate operations; AND, OR, and XOR. This paper concludes that the ANN had been successfully implemented on PIC16F877a and uM-FPU math co-processor hardware that works accordingly on both training and service mode. (Author)

Technology innovation, human resources and dysfunctional integration

DEFF Research Database (Denmark)

Madsen, Arne Stjernholm; Ulhøi, John Parm

2005-01-01

(Internet technology), which transcends the traditional business of the company in question. It illustrates what goes wrong when innovative human resources do not succeed in becoming integrated into the rest of the host organization and therefore may become trapped by their own passion in a position as self...

An integrated ball projection technology for the study of dynamic interceptive actions.

Science.gov (United States)

Stone, J A; Panchuk, D; Davids, K; North, J S; Fairweather, I; Maynard, I W

2014-12-01

Dynamic interceptive actions, such as catching or hitting a ball, are important task vehicles for investigating the complex relationship between cognition, perception, and action in performance environments. Representative experimental designs have become more important recently, highlighting the need for research methods to ensure that the coupling of information and movement is faithfully maintained. However, retaining representative design while ensuring systematic control of experimental variables is challenging, due to the traditional tendency to employ methods that typically involve use of reductionist motor responses such as buttonpressing or micromovements. Here, we outline the methodology behind a custom-built, integrated ball projection technology that allows images of advanced visual information to be synchronized with ball projection. This integrated technology supports the controlled presentation of visual information to participants while they perform dynamic interceptive actions. We discuss theoretical ideas behind the integration of hardware and software, along with practical issues resolved in technological design, and emphasize how the system can be integrated with emerging developments such as mixed reality environments. We conclude by considering future developments and applications of the integrated projection technology for research in human movement behaviors.

On-chip multi-wavelength laser sources fabricated using generic photonic integration technology

NARCIS (Netherlands)

Latkowski, S.; Williams, K.A.; Bente, E.A.J.M.

Generic photonic integration technology platforms allow for design and fabrication of large complexity application specific photonic integrated circuits. Monolithic active-passive integration on indium phosphide substrate naturally enables a reliable co-integration of optical gain elements and

The "Third"-Order Barrier for Technology-Integration Instruction: Implications for Teacher Education

Science.gov (United States)

Tsai, Chin-Chung; Chai, Ching Sing

2012-01-01

Technology integration is a major trend in contemporary education practice. When undertaking technology integration in classrooms, a first-order barrier and a second-order barrier, as proposed by Ertmer (1999), can hinder its implementation. The first-order barrier is external, such as lack of adequate access, time, training and institutional…

A 16 b 2 GHz digital-to-analog converter in 0.18 μm CMOS with digital calibration technology

International Nuclear Information System (INIS)

Yang Weidong; Pu Jie; Zhang Ruitao; Chen Chao; Zang Jiandong; Li Tiehu; Luo Pu

2015-01-01

This paper presents a 16-bit 2 GSPS digital-to-analog converter (DAC) in 0.18 μm CMOS technology. This DAC is implemented using time division multiplex access system architecture in the digital domain. The input data is received with a two-channel LVDS interface. The DLL technology is introduced to meet the timing requirements between phases of the LVDS data and the data sampling clock. A FIFO is designed to absorb the phase difference between the data clock and DAC system clock. A delay controller is integrated to adjust the phase relationship between the high speed digital clock and analog clock, obtaining a sampling rate of 2 GSPS. The current source mismatch at higher bits is calibrated in the digital domain. Test results show that the DAC achieves 74.02 dBC SFDR at analog output of 36 MHz, and DNL less than ±2.1 LSB and INL less than ±4.3 LSB after the chip is calibrated. (paper)

An Integrated Business and Technology Curriculum: Oil and Water?

Science.gov (United States)

Hodges, Hillary Jean

2011-01-01

Technology in every form has become an important part of everyday life. In business, it is a necessity for success and survival. Many authors (Kotrlik & Redmann, 2009; Ma & Runyon (2004), among others) in the arena of higher education have pointed out the need for truly integrated business and technology programs at the graduate level, but…

Technology success: Integration of power plant reliability and effective maintenance

International Nuclear Information System (INIS)

Ferguson, K.

2008-01-01

The nuclear power generation sector has a tradition of utilizing technology as a key attribute for advancement. Companies that own, manage, and operate nuclear power plants can be expected to continue to rely on technology as a vital element of success. Inherent with the operations of the nuclear power industry in many parts of the world is the close connection between efficiency of power plant operations and successful business survival. The relationship among power plant availability, reliability of systems and components, and viability of the enterprise is more evident than ever. Technology decisions need to be accomplished that reflect business strategies, work processes, as well as needs of stakeholders and authorities. Such rigor is needed to address overarching concerns such as power plant life extension and license renewal, new plant orders, outage management, plant safety, inventory management etc. Particular to power plant reliability, the prudent leveraging of technology as a key to future success is vital. A dominant concern is effective asset management as physical plant assets age. Many plants are in, or are entering in, a situation in which systems and component design life and margins are converging such that failure threats can come into play with increasing frequency. Wisely selected technologies can be vital to the identification of emerging threats to reliable performance of key plant features and initiating effective maintenance actions and investments that can sustain or enhance current reliability in a cost effective manner. This attention to detail is vital to investment in new plants as well This paper and presentation will address (1) specific technology success in place at power plants, including nuclear, that integrates attention to attaining high plant reliability and effective maintenance actions as well as (2) complimentary actions that maximize technology success. In addition, the range of benefits that accrue as a result of

Jordanian Pre-Service Teachers' and Technology Integration: A Human Resource Development Approach

Science.gov (United States)

Al-Ruz, Jamal Abu; Khasawneh, Samer

2011-01-01

The purpose of this study was to test a model in which technology integration of pre-service teachers was predicted by a number of university-based and school-based factors. Initially, factors affecting technology integration were identified, and a research-based path model was developed to explain causal relationships between these factors. The…

Technology Integration to Business Focusing on RFID, Interoperability, and Sustainability for Manufacturing, Logistics, and Supply Chain Management

CERN Document Server

Yee, John T

2013-01-01

Today’s global business environments drive companies to be more dependent on technology, and to remain competitive, firms will face situations in which they will need to introduce or adopt a new technology to their business. In order to achieve a successful integration with maximum return on investment, companies need a systematic approach that accommodates acomprehensive course of action of technology integration. Technology Integration to Business suggests a business-driven holistic approach of technology integration that consists of several steps. First, companies should examine the current state, issues, benefits, and obstacles of technology integration in conjunction with their competitive business strategy and operational capability. Second, firms should investigate new, emerging business technologies as to how those technologies can contribute to improve the business. Third, with the technology integration needs identified, companies should complete preparatory tasks before actual implementation, su...

JPRS Report Science & Technology Japan 16th International Congress of the International Society for Photogrammetry and Remote Sensing Volume 1

Science.gov (United States)

1989-01-24

Valder Matos de Medeiros, MSc DCG—Guidance and Control Department, INPE—Instituto de Pesquisas Espaciais, MCT—Ministerio da Ciencia e Tecnologia , Caixa...integral b(x, y ) = [j+" fCx’^MhCx^x’^^dx’dy’ (1) where f(x, y ) and b(x, y ) are the image and object intensity distribution respectively, and h(x, y ) is the...occupies only a limited region of the field. Equation (1) can be simplified to a convolution integral b(x.y) = fp" fUVy^hCx-x’^- y ^dx’dy’ (2j In the

Thermionic integrated circuit technology for high power space applications

International Nuclear Information System (INIS)

Yadavalli, S.R.

1984-01-01

Thermionic triode and integrated circuit technology is in its infancy and it is emerging. The Thermionic triode can operate at relatively high voltages (up to 2000V) and at least tens of amperes. These devices, including their use in integrated circuitry, operate at high temperatures (800 0 C) and are very tolerant to nuclear and other radiations. These properties can be very useful in large space power applications such as that represented by the SP-100 system which uses a nuclear reactor. This paper presents an assessment of the application of thermionic integrated circuitry with space nuclear power system technology. A comparison is made with conventional semiconductor circuitry considering a dissipative shunt regulator for SP-100 type nuclear power system rated at 100 kW. The particular advantages of thermionic circuitry are significant reductions in size and mass of heat dissipation and radiation shield subsystems

Technology-integrated Mathematics Education at the Secondary School Level

Directory of Open Access Journals (Sweden)

Hamdi Serin

2017-06-01

Full Text Available The potential of technological devices to enrich learning and teaching of Mathematics has been widely recognized recently. This study is founded on a case study that investigates how technology-related Mathematics teaching can enhance learning of Mathematical topics. The findings indicate that when teachers integrate technology into their teaching practices, students’ learning of Mathematics is significantly promoted. It was seen that the use of effective presentations through technological devices highly motivated the students and improved their mathematics achievement. This highlights that the availability of technological devices, teacher beliefs, easy access to resources and most importantly teacher skills of using technological devices effectively are decisive factors that can provide learners better understanding of mathematical concepts.

Professional Development Recognizing Technology Integration Modeled after the TPACK Framework

Science.gov (United States)

McCusker, Laura

2017-01-01

Public school teachers within a Pennsylvania intermediate unit are receiving inadequate job-embedded professional development that recognizes knowledge of content, pedagogy, and technology integration, as outlined by Mishra and Koehler's Technological Pedagogical Content Knowledge (TPACK) framework (2006). A school environment where teachers are…

F-16 Pilot Media Selection

Science.gov (United States)

1981-03-01

sweep wLS1vaTI GrJAVA-M*- .~--- ’- - - -t------ 7EOA FFM 𔃼t ee.W?mv ~.L: 1.7.5.4/2n C.AMM~AT!: L’sftle MIMI I-- itlm . z4 ~~~as~e;.~~ i c’.1~te1...ac~e I C-s.met~ I £’A.F- ivsa ~ta I ~ acca az~Y I I tc~ ~t I tca± - e~aec N .x-c, ; cnar. ~ ;zar~a I ~i~; EC~I~ a c2r..1C:%ttI I ~t7!fl - -- rr..r

Impact on estrogen receptor binding and target tissue uptake of [18F]fluorine substitution at the 16α-position of fulvestrant (faslodex; ICI 182,780)

International Nuclear Information System (INIS)

Seimbille, Yann; Benard, Francois; Rousseau, Jacques; Pepin, Emilie; Aliaga, Antonio; Tessier, Guillaume; Lier, Johan E. van

2004-01-01

Fulvestrant (Faslodex; ICI 182,780) is a pure estrogen receptor (ER) antagonist recently approved for the treatment of hormone-sensitive breast cancer in post-menopausal women with disease progression following antiestrogen therapy. Fulvestrant strongly binds to the ER and its mode of action consists of inhibition of ER dimerization leading to a down regulation of ER protein cellular levels. With the aim to develop a probe for positron emission tomography (PET) imaging capable of predicting the potential therapeutic efficacy of selective ER modulators (SERM), we prepared three new 16α-[ 18 F]fluoro-fulvestrant derivatives. These new radiopharmaceuticals were evaluated for their binding affinity to the human ERα and for their target tissue uptake in immature female rats. Substitution of one of the side-chain F-atoms of fulvestrant for 18 F would have led to a product of low specific activity; instead we selected the 16α-position for 18 F-labeling, which at least in the case of estradiol (ES) is well tolerated by the ER. Radiochemical synthesis proceeds by stereoselective introduction of the [ 18 F]fluoride at the 16- 18 F-position of fulvestrant via opening of an intermediate O-cyclic sulfate followed by hydrolysis of the protecting methoxymethyl (MOM) ether and sulfate groups. Three analogs with different oxidation states of the side chain sulfur, i.e. sulfide, sulfone or sulfoxide (fulvestrant) were prepared. Introduction of the 16 18 F-fluorine led to a dramatic decrease of the apparent binding affinity for ER, as reported by Wakeling et al. (Cancer Res. 1991;51:3867-73). Likewise, in vivo ER-mediated uterus uptake values in immature female rats were disappointing. Overall, our findings suggest that these new PET radiopharmaceuticals are not suitable as tracers to predict ER(+) breast cancer response to hormonal therapy with selective ER modulators

Easier Said than Done: Leading Technology Integration

Science.gov (United States)

Bleakley, David A.; Mangin, Melinda M.

2013-01-01

In this case, Mr. Phuture, a district administrator, attempts to lead a diverse team of educators and community members in an effort to develop a district-wide action plan for the integration of instructional technology in K-12 classrooms. Along the way, Mr. Phuture confronts ambiguities in the superintendent's directives, passionate contradicting…

Buried Waste Integrated Demonstration Technology Preparedness and Status Report Guidance

International Nuclear Information System (INIS)

Blacker, P.B.; Bonnenberg, R.W.; Cannon, P.G.; Hyde, R.A.; Watson, L.R.

1994-04-01

A Technology Preparedness and Status Report is required for each Technical Task Plan funded by the Buried Waste Integrated Demonstration. This document provides guidance for the preparation of that report. Major sections of the report will include a subset of the need for the technology, objectives of the demonstration, technology description and readiness evaluation, demonstration requirements, and preparedness checklist and action plan

Research and technology: 1994 annual report of the John F. Kennedy Space Center

Science.gov (United States)

1994-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1994 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. The Technology Programs and Commercialization Office (DE-TPO), (407) 867-3017, is responsible for publication of this report and should be contacted for any desired information regarding the advanced technology program.

Technology for the compatible integration of silicon detectors with readout electronics

International Nuclear Information System (INIS)

Zimmer, G.

1984-01-01

Compatible integration of detectors and readout electronics on the same silicon substrate is of growing interest. As the methods of microelectronics technology have already been adapted for detector fabrication, a common technology basis for detectors and readout electronics is available. CMOS technology exhibits most attractive features for the compatible realization of readout electronics when advanced LSI processing steps are combined with detector requirements. The essential requirements for compatible integration are the availability of high resistivity (100)-oriented single crystalline silicon substrate, the formation of suitably doped areas for MOS circuits and the isolation of the low voltage circuit from the detector operated at much higher supply voltage. Junction isolation as a first approach based on present production technology and dielectric isolation based on an advanced SOI-LSI technology are discussed as the most promising solutions for present and future applications, respectively. (orig.)

Caracterização físico-química e tecnológica da farinha de soja integral fermentada com Aspergillus oryzae Physicochemical and technological characterization of whole soybean flour fermented by Aspergillus oryzae

OpenAIRE

Leomar Hackbart da Silva; Paula Fernanda Pinto da Costa; Gabriela Wakayama Nomiyama; Ingrid Paula de Souza; Yoon Kil Chang

2012-01-01

Neste trabalho, estudou-se o efeito das condições de fermentação da farinha de soja integral, utilizando-se o fungo Aspergillus oryzae, sobre as características físico-químicas e as propriedades tecnológicas da farinha de soja integral autoclavada fermentada. A farinha de soja integral autoclavada foi fermentada com o fungo Aspergillus oryzae CCT 4359, incubada às temperaturas de 30 °C e 40 °C por 24 horas e 48 horas, e seca em estufa a vácuo, a 60 °C, até 10% de umidade final, obtendo-se a f...

Analyzing power for the 16O(p,n)16F (4-, 6.37 MeV) reaction at 134 MeV

International Nuclear Information System (INIS)

Madey, R.; Fazely, A.; Anderson, B.D.; Baldwin, A.R.; Kalenda, A.M.; McCarthy, R.J.; Tandy, P.C.; Watson, J.W.; Bertozzi, W.; Buti, T.; Finn, M.; Kovash, M.; Pugh, B.; Foster, C.C.

1982-01-01

We measured the analyzing power for the 16 O(p,n) 16 F (4 - , 6.37 MeV) reaction at 134.0 MeV and the differential cross section for the same reaction at 135.2 MeV. The shape of the cross section for the transition to this unnatural parity stretched state is described well by a distorted-wave impulse-approximation calculation using a (πd/sub 5/2/, νp/sub 3/2//sup ts-1/) 4 /sub -/ configuration and the effective interaction derived by Love and Franey from nucleon-nucleon phase shifts. The analyzing power from this calculation reproduces all of the qualitative features of the data and supports the use of the impulse approximation as an excellent starting point for describing the reaction mechanism. Quantitative agreement between the experimental and theoretical analyzing power can be improved by eliminating the imaginary tensor term of this interaction and taking the real part to be that derived by Love from the Sussex matrix elements. The sensitivity of the calculations to the choice of optical potentials and the importance of spin-orbit distortion is explored

Tech-Savvy Science Education? Understanding Teacher Pedagogical Practices for Integrating Technology in K-12 Classrooms

Science.gov (United States)

Hechter, Richard; Vermette, Laurie Anne

2014-01-01

This paper examines the technology integration practices of Manitoban K-12 inservice science educators based on the Technological, Pedagogical, and Content knowledge (TPACK) framework. Science teachers (n = 433) completed a 10-item online survey regarding pedagogical beliefs about technology integration, types of technology used, and how often…

Nanodiamonds coupled with 5,7-dimethoxycoumarin, a plant bioactive metabolite, interfere with the mitotic process in B16F10 cells altering the actin organization

Directory of Open Access Journals (Sweden)

Gismondi A

2016-02-01

Full Text Available Angelo Gismondi,1 Valentina Nanni,1 Giacomo Reina,2 Silvia Orlanducci,2 Maria Letizia Terranova,2 Antonella Canini1 1Department of Biology, 2Department of Chemical Science and Technology, University of Rome “Tor Vergata”, Rome, Italy Abstract: For the first time, we coupled reduced detonation nanodiamonds (NDs with a plant secondary metabolite, citropten (5,7-dimethoxycoumarin, and demonstrated how this complex was able to reduce B16F10 tumor cell growth more effectively than treatment with the pure molecule. These results encouraged us to find out the specific mechanism underlying this phenomenon. Internalization kinetics and quantification of citropten in cells after treatment with its pure or ND-conjugated form were measured, and it was revealed that the coupling between NDs and citropten was essential for the biological properties of the complex. We showed that the adduct was not able to induce apoptosis, senescence, or differentiation, but it determined cell cycle arrest, morphological changes, and alteration of mRNA levels of the cytoskeletal-related genes. The identification of metaphasic nuclei and irregular disposition of β-actin in the cell cytoplasm supported the hypothesis that citropten conjugated with NDs showed antimitotic properties in B16F10 cells. This work can be considered a pioneering piece of research that could promote and support the biomedical use of plant drug-functionalized NDs in cancer therapy. Keywords: citropten, cytoskeletal structure, plant secondary metabolite, melanoma, internalization kinetics

Decentralized peri-urban wastewater treatment technologies assessment integrating sustainability indicators.

Science.gov (United States)

Mena-Ulecia, Karel; Hernández, Heykel Hernández

2015-01-01

Selection of treatment technologies without considering the environmental, economic and social factors associated with each geographical context risks the occurrence of negative impacts that were not properly foreseen, working against the sustainable performance of the technology. The principal aim of this study was to evaluate 12 technologies for decentralized treatment of domestic wastewater applicable to peri-urban communities using sustainability approaches and, at the same time, continuing a discussion about how to address a more integrated assessment of overall sustainability. For this, a set of 13 indicators that embody the environmental, economic and social approach for the overall sustainability assessment were used by means of a target plot diagram as a tool for integrating indicators that represent a holistic analysis of the technologies. The obtained results put forward different degrees of sustainability, which led to the selection of: septic tank+land infiltration; up-flow anaerobic reactor+high rate trickling filter and septic tank+anaerobic filter as the most sustainable and attractive technologies to be applied in peri-urban communities, according to the employed indicators.

Integrative analyses reveal novel strategies in HPV11,-16 and-45 early infection

DEFF Research Database (Denmark)

Kaczkowski, Bogumil; Rossing, Maria; Andersen, Ditte

2012-01-01

of genes not previously implicated in HPV biology, such as the PSG family and ANKRD1, and of genes implicated in the biology of other viruses, e. g. MX1, IFI44 and DDX60. Carcinogenesis-related genes, e. g. ABL2, MGLL and CYR61, were upregulated by high-risk HPV16 and -45. The integrative analysis revealed...... the suppression of DNA repair by HPV11 and -16, and downregulation of cytoskeleton genes by all HPV types. Various signalling pathways were affected by the HPVs: IL-2 by HPV11; JAK-STAT by HPV16; and TGF-beta, NOTCH and tyrosine kinase signalling by HPV45. This study uncovered novel strategies employed by HPV...... to establish infection and promote uncontrolled growth....

Efektivitas kurkumin sebagai antioksidan dan inhibitor melanin pada kultur sel B16F1

Directory of Open Access Journals (Sweden)

Sugiharto Sugiharto

2013-03-01

Full Text Available Melanin inhibitors have become increasingly important ingredients in medication and cosmetics for the prevention ofhyperpigmentation. In the last few years, a huge number of natural herbal extracts have been tested as inhibitors of melanin synthesisand some of these effects are related to the antioxidant properties. The objectives of this study were to determine of curcumin propertiesas antioxidant activity and melanin inhibitors. In this study, our data indicated that antioxidant assay with DPPH showed IC50 was16,05 μg/ml. In the absence of α-MSH (α-Melanocyte Stimulating Hormone, melanin content assay in cell B16-F1 indicated thatthe highest activity of curcumin to reduce melanin content of 45,67% at 25 μg/ml. Meanwhile, in the presence of α-MSH at the sameconcentration indicated that the highest activity was 53,87%. Based on the data, curcumin has potential properties as antioxidantactivity and melanin inhibitor.

Predicting Elementary Education Candidates' Technology Integration during Their Field Placement Instruction.

Science.gov (United States)

Negishi, Meiko; Elder, Anastasia D.; Hamil, J. Burnette; Mzoughi, Taha

A growing concern in teacher education programs is technology training. Research confirms that training positively affects perservice teachers' attitudes and technology proficiency. However, little is known about the kinds of factors that may predict preservice teachers' integration of technology into their own instruction. The goal of this study…

F-16XL Ship #2 in hangar for Laminar Flow Glove mounting

Science.gov (United States)

1995-01-01

NASA's two-seat F-16XL research aircraft is shown in the modification hangar at the Dryden Flight Research Center, Edwards, California, during installation of a titanium 'glove' on the upper surface of its modified left wing. The aircraft subsequently concluded a 13 month-long, 45-flight research program which investigated drawing off a small portion of the boundary-layer air in order to provide laminar -- or smooth -- flow over a major portion of a wing flying at supersonic speeds. A turbo-compressor in the aircraft's fuselage provided suction to draw air through more than 10 million tiny laser-drilled holes in the glove via a manifold system employing 20 valves. Data obtained during the program could assist designers of future high-speed aircraft in developing a more efficient civil transport.

B16F1 melanoma cells upregulate melanin synthesis after photodynamic therapy

International Nuclear Information System (INIS)

Moder, A.; Gassner, F.; Krammer, B.; Thalhamer, J.; Hammerl, P.

2003-01-01

Full text: The success of photodynamic therapy (PDT) of melanotic tumors is severely limited by insufficient penetration of light into deeper tissue layers. In this study, we analyzed the effect of PDT on the melanin production of the melanoma cell line B16F1. In vitro, these cells produce only little melanin. However, after PDT we found a dramatic elevation in intracellular melanin. Melanin production increased with, both, the concentration of the sensitizing agent and the light dose, and was found to continue for several hours after cell death. PDT-induced melanin synthesis was not prevented by the addition of cycloheximide or actinomycin D prior to irradiation, indicating that de-novo protein synthesis and transcriptional activity are not required for this effect. We also analyzed tyrosinase activity, a key enzyme in melanin biosynthesis, in PDT-treated B16 cells. Tyrosinase activity was found in PDT-treated as well as untreated cells. Cell fractionation experiments showed that tyrosinase was present in the cytosolic as well as the melanosomal fractions of, both, PDT-treated (melanin-high) as well as untreated (melanin-low) cells. These data indicate that PDT-induced production of melanin is not controlled at the transcriptional or translational level and that tyrosinase is not likely an essential regulator in this process. (author)

On-chip integrated functional near infra-red spectroscopy (fNIRS) photoreceiver for portable brain imaging

Science.gov (United States)

Kamrani, Ehsan

Optical brain imaging using functional near infra-red spectroscopy (fNIRS) offers a direct and noninvasive tool for monitoring of blood oxygenation. fNIRS is a noninvasive, safe, minimally intrusive, and high temporal-resolution technique for real-time and long-term brain imaging. It allows detecting both fast-neuronal and slow-hemodynamic signals. Besides the significant advantages of fNIRS systems, they still suffer from few drawbacks including low spatial-resolution, moderately high-level noise and high-sensitivity to movement. In order to overcome the limitations of currently available non-portable fNIRS systems, we have introduced a new low-power, miniaturized on-chip photodetector front-end intended for portable fNIRS systems. It includes silicon avalanche photodiode (SiAPD), Transimpedance amplifier (TIA), and Quench- Reset circuitry implemented using standard CMOS technologies to operate in both linear and Geiger modes. So it can be applied for both continuous-wave fNIRS (CW-fNIRS) and also single-photon counting applications. Several SiAPDs have been implemented in novel structures and shapes (Rectangular, Octagonal, Dual, Nested, Netted, Quadratic and Hexadecagonal) using different premature edge breakdown prevention techniques. The main characteristics of the SiAPDs are validated and the impact of each parameter and the device simulators (TCAD, COMSOL, etc.) have been studied based on the simulation and measurement results. Proposed techniques exhibit SiAPDs with high avalanche-gain (up to 119), low breakdown-voltage (around 12V) and high photon-detection efficiency (up to 72% in NIR region) in additional to a low dark-count rate (down to 30Hz at 1V excess bias voltage). Three new high gain-bandwidth product (GBW) and low-noise TIAs are introduced and implemented based on distributed-gain concept, logarithmic-amplification and automatic noise-rejection and have been applied in linear-mode of operation. The implemented TIAs offer a power

Wolfram technologies as an integrated scalable platform for interactive learning

Science.gov (United States)

Kaurov, Vitaliy

2012-02-01

We rely on technology profoundly with the prospect of even greater integration in the future. Well known challenges in education are a technology-inadequate curriculum and many software platforms that are difficult to scale or interconnect. We'll review an integrated technology, much of it free, that addresses these issues for individuals and small schools as well as for universities. Topics include: Mathematica, a programming environment that offers a diverse range of functionality; natural language programming for getting started quickly and accessing data from Wolfram|Alpha; quick and easy construction of interactive courseware and scientific applications; partnering with publishers to create interactive e-textbooks; course assistant apps for mobile platforms; the computable document format (CDF); teacher-student and student-student collaboration on interactive projects and web publishing at the Wolfram Demonstrations site.

Legacy system integration using web technology

Science.gov (United States)

Kennedy, Richard L.; Seibert, James A.; Hughes, Chris J.

2000-05-01

As healthcare moves towards a completely digital, multimedia environment there is an opportunity to provide for cost- effective, highly distributed physician access to clinical information including radiology-based imaging. In order to address this opportunity a Universal Clinical Desktop (UCD) system was developed. A UCD provides a single point of entry into an integrated view of all types of clinical data available within a network of disparate healthcare information systems. In order to explore the application of a UCD in a hospital environment, a pilot study was established with the University of California Davis Medical Center using technology from Trilix Information Systems. Within this pilot environment the information systems integrated under the UCD include a radiology information system (RIS), a picture archive and communication system (PACS) and a laboratory information system (LIS).

AN INTEGRATED MODELING FRAMEWORK FOR CARBON MANAGEMENT TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Anand B. Rao; Edward S. Rubin; Michael B. Berkenpas

2004-03-01

CO{sub 2} capture and storage (CCS) is gaining widespread interest as a potential method to control greenhouse gas emissions from fossil fuel sources, especially electric power plants. Commercial applications of CO{sub 2} separation and capture technologies are found in a number of industrial process operations worldwide. Many of these capture technologies also are applicable to fossil fuel power plants, although applications to large-scale power generation remain to be demonstrated. This report describes the development of a generalized modeling framework to assess alternative CO{sub 2} capture and storage options in the context of multi-pollutant control requirements for fossil fuel power plants. The focus of the report is on post-combustion CO{sub 2} capture using amine-based absorption systems at pulverized coal-fired plants, which are the most prevalent technology used for power generation today. The modeling framework builds on the previously developed Integrated Environmental Control Model (IECM). The expanded version with carbon sequestration is designated as IECM-cs. The expanded modeling capability also includes natural gas combined cycle (NGCC) power plants and integrated coal gasification combined cycle (IGCC) systems as well as pulverized coal (PC) plants. This report presents details of the performance and cost models developed for an amine-based CO{sub 2} capture system, representing the baseline of current commercial technology. The key uncertainties and variability in process design, performance and cost parameters which influence the overall cost of carbon mitigation also are characterized. The new performance and cost models for CO{sub 2} capture systems have been integrated into the IECM-cs, along with models to estimate CO{sub 2} transport and storage costs. The CO{sub 2} control system also interacts with other emission control technologies such as flue gas desulfurization (FGD) systems for SO{sub 2} control. The integrated model is applied to

Technology Integration with Teacher Candidates in a Summer-Camp Setting

Science.gov (United States)

Pilgrim, Jodi; Berry, Joan

2014-01-01

Many districts have implemented one-to-one technology initiatives, where students have access to computers or tablets for use in and out of school. Teachers participating in these initiatives may lack knowledge about ways to integrate technology into classroom practices (Pilgrim and Bledsoe, 2012); therefore, teacher preparation programs must…

Design and development of low cost thermoluminescence measurement system using PIC16F877 microcontroller

International Nuclear Information System (INIS)

Neelamegam, P; Rajendran, A

2006-01-01

A real time microcontroller based thermoluminescence system has been developed to measure light intensity and temperature and to control linear heating. This instruments permits to conduct investigations on thermoluminescent materials, such as alkali halides, phosphors and related compounds, which have important applications in materials science and in dosimetry. A low cost dedicated PIC16F877 based microcontroller board was employed for the hardware. The detail of its interface and software to measure thermoluminescence and to send data to PC is explained in this paper

Design and development of low cost thermoluminescence measurement system using PIC16F877 microcontroller

Energy Technology Data Exchange (ETDEWEB)

Neelamegam, P [Department of Electronics and Instrumentation Engineering, Shunmuga Arts, Science, Technology and Research Academy (SASTRA), Deemed University, Thanjavur-613 402, Tamil Nadu (India); Rajendran, A [PG and Research Department of Applied Physics, Nehru Memorial College (Autonomous), Puthanampatti-621 007, Tiruchirappalli, Tamil Nadu (India)

2006-05-15

A real time microcontroller based thermoluminescence system has been developed to measure light intensity and temperature and to control linear heating. This instruments permits to conduct investigations on thermoluminescent materials, such as alkali halides, phosphors and related compounds, which have important applications in materials science and in dosimetry. A low cost dedicated PIC16F877 based microcontroller board was employed for the hardware. The detail of its interface and software to measure thermoluminescence and to send data to PC is explained in this paper.

Integration with Energy Harvesting Technology

Directory of Open Access Journals (Sweden)

S. Williams

2012-11-01

Full Text Available This paper reports on the design and implementation of a wireless sensor communication system with a low power consumption that allows it to be integrated with the energy harvesting technology. The system design and implementation focus on reducing the power consumption at three levels: hardware, software and data transmission. The reduction in power consumption, at hardware level in particular, is mainly achieved through the introduction of an energy-aware interface (EAI that ensures a smart inter-correlated management of the energy flow. The resulted system satisfies the requirements of a wireless sensor structure that possesses the energy autonomous capability.

Impact of Professional Development on Level of Technology Integration in the Elementary Classroom

Science.gov (United States)

Miktuk, Darlynda

2012-01-01

The purpose of the quantitative study was to evaluate the impact of professional development on the level of technology integration within the elementary classroom using an online survey known as the LoTi (levels of teaching innovation) survey. Information about the history of computers, technology integration, andragogy, and effective…

Literacy and Technology: Integrating Technology with Small Group, Peer-led Discussions of Literature

Directory of Open Access Journals (Sweden)

Genya Coffey

2012-03-01

Full Text Available This review examines research of computer-mediated small group discussion of literature. The goal of this review is to explore several instructional formats for integrating print-based and new literacies skills. First, the theoretical foundations for the shift from teacher-led to student led discussion are outlined. Research exploring ways in which technology has been infused into several common elements of literature discussion groups are presented next. Benefits and challenges of such integration are highlighted and suggestions for future research are presented.

A Model of Leadership in Integrating Educational Technology in Higher Education

Science.gov (United States)

Markova, Mariya

2014-01-01

The potential impacts and implications of technology on the professional lives of instructors in higher education, and the role of leadership in integrating educational technology, present a variety of complexities and challenges. The purpose of this paper is to identify the reasons why faculty members are not fully embracing technology and what…

Advances in fMRI Real-Time Neurofeedback.

Science.gov (United States)

Watanabe, Takeo; Sasaki, Yuka; Shibata, Kazuhisa; Kawato, Mitsuo

2017-12-01

Functional magnetic resonance imaging (fMRI) neurofeedback is a type of biofeedback in which real-time online fMRI signals are used to self-regulate brain function. Since its advent in 2003 significant progress has been made in fMRI neurofeedback techniques. Specifically, the use of implicit protocols, external rewards, multivariate analysis, and connectivity analysis has allowed neuroscientists to explore a possible causal involvement of modified brain activity in modified behavior. These techniques have also been integrated into groundbreaking new neurofeedback technologies, specifically decoded neurofeedback (DecNef) and functional connectivity-based neurofeedback (FCNef). By modulating neural activity and behavior, DecNef and FCNef have substantially advanced both basic and clinical research. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Vertical integration technologies for vertex detectors

International Nuclear Information System (INIS)

Ratti, L.

2011-01-01

This work is focused on the use of vertical integration (3D) technologies in the design of hybrid or monolithic pixel detectors in view of applications to silicon vertex trackers (SVTs) at the future high luminosity colliders. After a short introduction on the specifications of next-generation SVTs, the paper will discuss the general features of 3D microelectronic processes and the benefits they can provide to the design of pixel detectors for high energy physics experiments.

Advanced Stirling Convertor (ASC) Technology Maturation

Science.gov (United States)

Wong, Wayne A.; Wilson, Scott; Collins, Josh; Wilson, Kyle

2016-01-01

The Advanced Stirling Convertor (ASC) development effort was initiated by NASA Glenn Research Center with contractor Sunpower, Inc., to develop high-efficiency thermal-to-electric power conversion technology for NASA Radioisotope Power Systems (RPSs). Early successful performance demonstrations led to the expansion of the project as well as adoption of the technology by the Department of Energy (DOE) and system integration contractor Lockheed Martin Space Systems Company as part of the Advanced Stirling Radioisotope Generator (ASRG) flight project. The ASRG integrates a pair of ASCs to convert the heat from a pair of General Purpose Heat Source (GPHS) modules into electrical power. The expanded NASA ASC effort included development of several generations of ASC prototypes or engineering units to help prepare the ASC technology and Sunpower for flight implementation. Sunpower later had two parallel contracts allowing the last of the NASA engineering units called ASC-E3 to serve as pathfinders for the ASC-F flight convertors being built for DOE. The ASC-E3 convertors utilized the ASC-F flight specifications and were built using the ASC-F design and process documentation. Shortly after the first ASC-F pair achieved initial operation, due to budget constraints, the DOE ASRG flight development contract was terminated. NASA continues to invest in the development of Stirling RPS technology including continued production of the ASC-E3 convertors, seven of which have been delivered with one additional unit in production. Starting in fiscal year 2015, Stirling Convertor Technology Maturation has been reorganized as an element of the RPS Stirling Cycle Technology Development (SCTD) Project and long-term plans for continued Stirling technology advancement are in reformulation. This paper provides a status on the ASC project, an overview of advancements made in the design and production of the ASC at Sunpower, and a summary of acceptance tests, reliability tests, and tactical

The development of integrated safety assessment technology

International Nuclear Information System (INIS)

Yoo, Keon Joong; Park, Chang Kyu; Kim, Tae Un; Han, Sang Hoon; Yang, Joon Eon; Lim, Tae Jin; Han, Jae Joo; Je, Moo Seong; An, Kwang Il; Kim, Shi Dal; Jeong, Jong Tae; Jeong, Kwang Seop; Jin, Yeong Ho; Kim, Dong Ha; Kim, Kil Yoo; Cho, Yeong Kyoon; Jeong, Won Dae; Jang, Seung Cheol; Choi, Yeong; Park, Soo Yong; Seong, Tae Yong; Song, Yong Man; Kang, Dae Il; Park, Jin Hee; Jang, Seon Joo; Hwang, Mi Jeong; Choi, Seon Yeong

1993-05-01

For the purpose of developing the integrated PSA methodology and computer codes, Level-1 and Level-2 PSA methodology and tools were reviewed and improved. The Level-1 PSA computer code package KIRAP was improved and released by the name of KIRAP Release 2.0 Several Human reliability analysis and common cause failure analysis methods was reviewed and compared. For the development of Level-2 PSA computer code, several level-1 and Level-2 interface methods and containment event tree development methods were reviewed and compared. And the new technology such as artificial intelligence was reviewed if the technology can be applied to the development of PSA methodology.(Author)

Impact on estrogen receptor binding and target tissue uptake of [{sup 18}F]fluorine substitution at the 16{alpha}-position of fulvestrant (faslodex; ICI 182,780)

Energy Technology Data Exchange (ETDEWEB)

Seimbille, Yann; Benard, Francois E-mail: francois.benard@USherbrooke.ca; Rousseau, Jacques; Pepin, Emilie; Aliaga, Antonio; Tessier, Guillaume; Lier, Johan E. van

2004-08-01

Fulvestrant (Faslodex; ICI 182,780) is a pure estrogen receptor (ER) antagonist recently approved for the treatment of hormone-sensitive breast cancer in post-menopausal women with disease progression following antiestrogen therapy. Fulvestrant strongly binds to the ER and its mode of action consists of inhibition of ER dimerization leading to a down regulation of ER protein cellular levels. With the aim to develop a probe for positron emission tomography (PET) imaging capable of predicting the potential therapeutic efficacy of selective ER modulators (SERM), we prepared three new 16{alpha}-[{sup 18}F]fluoro-fulvestrant derivatives. These new radiopharmaceuticals were evaluated for their binding affinity to the human ER{alpha} and for their target tissue uptake in immature female rats. Substitution of one of the side-chain F-atoms of fulvestrant for {sup 18}F would have led to a product of low specific activity; instead we selected the 16{alpha}-position for {sup 18}F-labeling, which at least in the case of estradiol (ES) is well tolerated by the ER. Radiochemical synthesis proceeds by stereoselective introduction of the [{sup 18}F]fluoride at the 16-{sup 18}F-position of fulvestrant via opening of an intermediate O-cyclic sulfate followed by hydrolysis of the protecting methoxymethyl (MOM) ether and sulfate groups. Three analogs with different oxidation states of the side chain sulfur, i.e. sulfide, sulfone or sulfoxide (fulvestrant) were prepared. Introduction of the 16{sup 18}F-fluorine led to a dramatic decrease of the apparent binding affinity for ER, as reported by Wakeling et al. (Cancer Res. 1991;51:3867-73). Likewise, in vivo ER-mediated uterus uptake values in immature female rats were disappointing. Overall, our findings suggest that these new PET radiopharmaceuticals are not suitable as tracers to predict ER(+) breast cancer response to hormonal therapy with selective ER modulators.

Issues in Integrating Information Technology in Learning and Teaching EFL: The Saudi Experience

Science.gov (United States)

Al-Maini, Yousef Hamad

2013-01-01

The Saudi education system is facing a climate of change characterized by an interest in integrating new technology and educational approaches to improve teaching and learning. In this climate, the present paper explores the issues in integrating information technology in learning and teaching English as a foreign language (EFL) in government…

The biochemical characterization, stabilization studies and the antiproliferative effect of bromelain against B16F10 murine melanoma cells.

Science.gov (United States)

São Paulo Barretto Miranda, Íngara Keisle; Fontes Suzart Miranda, Anderson; Souza, Fernanda Vidigal Duarte; Vannier-Santos, Marcos André; Pirovani, Carlos Priminho; Pepe, Iuri Muniz; Rodowanski, Ivanoé João; Ferreira, Katiúcia Tícila de Souza Eduvirgens; Mendes Souza Vaz, Luciano; de Assis, Sandra Aparecida

2017-06-01

The current study aims to extract bromelain from different parts (stem, crown, peels, pulp and leaves) of Ananas comosus var. comosus AGB 772; to determine of optimum pH and temperature; to test bromelain stability in disodium EDTA and sodium benzoate, and to investigate its pharmacological activity on B16F10 murine melanoma cells in vitro. The highest enzymatic activity was found in bromelain extracted from the pulp and peel. The optimum bromelain pH among all studied pineapple parts was 6.0. The optimum temperature was above 50 °C in all bromelain extracts. The fluorescence analysis confirmed the stability of bromelain in the presence of EDTA and sodium benzoate. Bromelain was pharmacologically active against B16F10 melanoma cells and it was possible verifying approximately 100% inhibition of tumor cell proliferation in vitro. Since bromelain activity was found in different parts of pineapple plants, pineapple residues from the food industry may be used for bromelain extraction.

Geluidsexpositie bij Gebruik van Otoplastieken met Communicatie (Sound Exposure Level of F-16 Crew Chiefs Using Custom Molded Communications Earplugs)

National Research Council Canada - National Science Library

Houben, M. M; Verhave, J. A

2008-01-01

.... In a previous study, we developed a method to assess the sound exposure level of CEP users. Not only was the attenuated F 16 noise taken into account, but also the sound exposure resulting from communication through the CEP...

cRGD-installed docetaxel-loaded mertansine prodrug micelles: redox-triggered ratiometric dual drug release and targeted synergistic treatment of B16F10 melanoma

Science.gov (United States)

Zhong, Ping; Qiu, Min; Zhang, Jian; Sun, Huanli; Cheng, Ru; Deng, Chao; Meng, Fenghua; Zhong, Zhiyuan

2017-07-01

Combinatorial chemotherapy, which has emerged as a promising treatment modality for intractable cancers, is challenged by a lack of tumor-targeting, robust and ratiometric dual drug release systems. Here, docetaxel-loaded cRGD peptide-decorated redox-activable micellar mertansine prodrug (DTX-cRGD-MMP) was developed for targeted and synergistic treatment of B16F10 melanoma-bearing C57BL/6 mice. DTX-cRGD-MMP exhibited a small size of ca. 49 nm, high DTX and DM1 loading, low drug leakage under physiological conditions, with rapid release of both DTX and DM1 under a cytoplasmic reductive environment. Notably, MTT and flow cytometry assays showed that DTX-cRGD-MMP brought about a synergistic antitumor effect to B16F10 cancer cells, with a combination index of 0.37 and an IC50 over 3- and 13-fold lower than cRGD-MMP (w/o DTX) and DTX-cRGD-Ms (w/o DM1) controls, respectively. In vivo studies revealed that DTX-cRGD-MMP had a long circulation time and a markedly improved accumulation in the B16F10 tumor compared with the non-targeting DTX-MMP control (9.15 versus 3.13% ID/g at 12 h post-injection). Interestingly, mice treated with DTX-cRGD-MMP showed almost complete growth inhibition of B16F10 melanoma, with tumor inhibition efficacy following an order of DTX-cRGD-MMP > DTX-MMP (w/o cRGD) > cRGD-MMP (w/o DTX) > DTX-cRGD-Ms (w/o DM1) > free DTX. Consequently, DTX-cRGD-MMP significantly improved the survival rates of B16F10 melanoma-bearing mice. Importantly, DTX-cRGD-MMP caused little adverse effects as revealed by mice body weights and histological analyses. The combination of two mitotic inhibitors, DTX and DM1, appears to be an interesting approach for effective cancer therapy.

Mixed Waste Integrated Program -- Problem-oriented technology development

International Nuclear Information System (INIS)

Hart, P.W.; Wolf, S.W.; Berry, J.B.

1994-01-01

The Mixed Waste Integrated Program (MWIP) is responding to the need for DOE mixed waste treatment technologies that meet these dual regulatory requirements. MWIP is developing emerging and innovative treatment technologies to determine process feasibility. Technology demonstrations will be used to determine whether processes are superior to existing technologies in reducing risk, minimizing life-cycle cost, and improving process performance. Technology development is ongoing in technical areas required to process mixed waste: materials handling, chemical/physical treatment, waste destruction, off-gas treatment, final forms, and process monitoring/control. MWIP is currently developing a suite of technologies to process heterogeneous waste. One robust process is the fixed-hearth plasma-arc process that is being developed to treat a wide variety of contaminated materials with minimal characterization. Additional processes encompass steam reforming, including treatment of waste under the debris rule. Advanced off-gas systems are also being developed. Vitrification technologies are being demonstrated for the treatment of homogeneous wastes such as incinerator ash and sludge. An alternative to conventional evaporation for liquid removal--freeze crystallization--is being investigated. Since mercury is present in numerous waste streams, mercury removal technologies are being developed

DNV RP-F116 integrity management of submarine pipeline system

Energy Technology Data Exchange (ETDEWEB)

Leinum, B.H.; Etterdal, B. [Det Norske Veritas (DNV), Hoevik (Norway); Augustinovic, Z. [Dong Energy, Fredericia (Denmark); Paula, A. [Det Norske Veritas (DNV), Rio de Janeiro, RJ (Brazil)

2009-12-19

The need to keep pipelines operating safely and efficiently is paramount for any operator. Additionally, there is an increasing awareness at both regulatory and public level. Authorities around the world are adopting a more proactive approach as they seek to minimize the risk of human injuries or harm to the environment resulting from pipeline leaks. A joint industry project (JIP) led by DNV Energy is formulating guidelines for how to manage the integrity of submarine pipeline system. The resultant document of recommended practice, DNV RP-F116, will provide the oil and gas industry with a useful tool in an area where no such formal guidance currently exists. This paper gives an overview of the RP and demonstrates the use with a case study for the Siri field. The Siri field is operated by DONG Energy, Denmark and all infield pipelines were subjected to an integrity assessment using the Integrity Management process as outlined in the upcoming DNV RP-116. In parallel with establishing the RP, DNV has further developed the web-based software system, Orbit+, which is aligned with the RP. The software system is implemented and used by Dong Energy. (author)

Promoting Science and Technology in Primary Education: A Review of Integrated Curricula

NARCIS (Netherlands)

Drs Rens Gresnigt; Koeno Gravemeijer; Hanno Keulen, van; Liesbeth Baartman; Ruurd Taconis

2014-01-01

Integrated curricula seem promising for the increase of attention on science and technology in primary education. A clear picture of the advantages and disadvantages of integration efforts could help curriculum innovation. This review has focussed on integrated curricula in primary education from

Promoting science and technology in primary education : a review of integrated curricula

NARCIS (Netherlands)

Gresnigt, H.L.L.; Taconis, R.; Keulen, van Hanno; Gravemeijer, K.P.E.; Baartman, L.K.J.

2014-01-01

Integrated curricula seem promising for the increase of attention on science and technology in primary education. A clear picture of the advantages and disadvantages of integration efforts could help curriculum innovation. This review has focused on integrated curricula in primary education from

Promoting science and technology in primary education : a review of integrated curricula

NARCIS (Netherlands)

Hanno van Keulen; Rens Gresnigt; Liesbeth Baartman; Ruurd Taconis; Koeno Gravemeijer

2014-01-01

Integrated curricula seem promising for the increase of attention on science and technology in primary education. A clear picture of the advantages and disadvantages of integration efforts could help curriculum innovation. This review has focussed on integrated curricula in primary education from

Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP)

International Nuclear Information System (INIS)

1994-04-01

The Characterization, Monitoring, and Sensor Technology Integrated Program seeks to deliver needed technologies, timely and cost-effectively, to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The scope of characterizations monitoring, and sensor technology needs that are required by those organizations encompass: (1) initial location and characterization of wastes and waste environments - prior to treatment; (2) monitoring of waste retrieval, remediation and treatment processes; (3) characterization of the co-position of final waste treatment forms to evaluate the performance of waste treatments processes; and (4) site closure and compliance monitoring. Wherever possible, the CMST-IP fosters technology transfer and commercialization of technologies that it sponsors

75 FR 37860 - Aris Industries, Inc., Bene Io, Inc., Commodore Separation Technologies, Inc., Food Integrated...

Science.gov (United States)

2010-06-30

...., Commodore Separation Technologies, Inc., Food Integrated Technologies, Inc., Gap Instrument Corp., Skysat Communications Network Corp., and Vicon Fiber Optics Corp.; Order of Suspension of Trading June 28, 2010. It... information concerning the securities of Food Integrated Technologies, Inc. because it has not filed any...

Evaluating Technology to Prevent Academic Integrity Violations in Online Environments

Science.gov (United States)

Brown, Victoria

2018-01-01

Protection of academic integrity in online environments can be challenging. Understanding how the technology works and concerns about each of the methods for monitoring online interactions can assist in the selection of the best proctoring tools. Depending on the content, the type of assessment and the comfort level with the technology, a…

Antitumor effect of iRGD-modified liposomes containing conjugated linoleic acid–paclitaxel (CLA-PTX on B16-F10 melanoma

Directory of Open Access Journals (Sweden)

Du R

2014-06-01

Full Text Available Ruo Du,1 Ting Zhong,1 Wei-Qiang Zhang,1 Ping Song,1 Wen-Ding Song,1 Yang Zhao,1 Chao-Wang,1 Yi-Qun Tang,3 Xuan Zhang,1,2 Qiang Zhang1,2 1Department of Pharmaceutics, 2State Key Laboratory of Natural and Biomimetic Drugs, School of Pharmaceutical Sciences, Peking University, Beijing, 3Department of Clinical Pharmacy, China Pharmaceutical University, Nanjing, People’s Republic of China Abstract: In the present study, we prepared a novel delivery system of iRGD (CRGDK/RGPD/EC-modified sterically stabilized liposomes (SSLs containing conjugated linoleic acid–paclitaxel (CLA-PTX. The anti-tumor effect of iRGD-SSL-CLA-PTX was investigated on B16-F10 melanoma in vitro and in vivo. The in vitro targeting effect of iRGD-modified SSLs was investigated in a real-time confocal microscopic analysis experiment. An endocytosis-inhibition assay was used to evaluate the endocytosis pathways of the iRGD-modified SSLs. In addition, the in vitro cellular uptake and in vitro cytotoxicity of iRGD-SSL-CLA-PTX were evaluated in B16-F10 melanoma cells. In vivo biodistribution and in vivo antitumor effects of iRGD-SSL-CLA-PTX were investigated in B16-F10 tumor-bearing mice. The induction of apoptosis by iRGD-SSL-CLA-PTX was evaluated in tumor-tissue sections. Real-time confocal microscopic analysis results indicated that the iRGD-modified SSLs internalized into B16-F10 cells faster than SSLs. The identified endocytosis pathway of iRGD-modified SSLs indicated that energy- and lipid raft-mediated endocytosis played a key role in the liposomes’ cellular uptake. The results of the cellular uptake experiment indicated that the increased cellular uptake of CLA-PTX in the iRGD-SSL-CLA-PTX-treated group was 1.9-, 2.4-, or 2.1-fold compared with that in the CLA-PTX group after a 2-, 4-, or 6-hour incubation, respectively. In the biodistribution test, the CLA-PTX level in tumor tissues from iRGD-SSL-CLA-PTX-treated mice at 1 hour (1.84±0.17 µg/g and 4 hours (1.17±0

Integrated optical circuit engineering IV; Proceedings of the Meeting, Cambridge, MA, Sept. 16, 17, 1986

Science.gov (United States)

Mentzer, Mark A.; Sriram, S.

The design and implementation of integrated optical circuits are discussed in reviews and reports. Topics addressed include lithium niobate devices, silicon integrated optics, waveguide phenomena, coupling considerations, processing technology, nonlinear guided-wave optics, integrated optics for fiber systems, and systems considerations and applications. Also included are eight papers and a panel discussion from an SPIE conference on the processing of guided-wave optoelectronic materials (held in Los Angeles, CA, on January 21-22, 1986).

Faculty Integration of Technology into Instruction and Students' Perceptions of Computer Technology to Improve Student Learning

Science.gov (United States)

Keengwe, Jared

2007-01-01

There has been a remarkable improvement in access and rate of adoption of technology in higher education. Even so, reports indicate that faculty members are not integrating technology into instruction in ways that make a difference in student learning (Cuban, 2001; McCannon & Crews, 2000). To help faculty make informed decisions on student…

Intravenous administration of bone marrow-derived multipotent mesenchymal stromal cells enhances the recruitment of CD11b{sup +} myeloid cells to the lungs and facilitates B16-F10 melanoma colonization

Energy Technology Data Exchange (ETDEWEB)

Souza, Lucas E.B., E-mail: lucasebsouza@usp.br [Department of Clinical Medicine, School of Medicine of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil); Hemotherapy Center of Ribeirão Preto, School of Medicine of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil); Almeida, Danilo C., E-mail: gudaalmeida@gmail.com [Department of Medicine – Nephrology, Laboratory of Clinical and Experimental Immunology, Federal University of São Paulo, São Paulo, SP (Brazil); Yaochite, Juliana N.U., E-mail: ueda.juliana@gmail.com [Department of Biochemistry and Immunology, Basic and Applied Immunology Program, School of Medicine of Ribeirão Preto, University of São Paulo (Brazil); Covas, Dimas T., E-mail: dimas@fmrp.usp.br [Department of Clinical Medicine, School of Medicine of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil); Hemotherapy Center of Ribeirão Preto, School of Medicine of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil); Fontes, Aparecida M., E-mail: aparecidamfontes@usp.br [Department of Genetics, School of Medicine of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP (Brazil)

2016-07-15

The discovery that the regenerative properties of bone marrow multipotent mesenchymal stromal cells (BM-MSCs) could collaterally favor neoplastic progression has led to a great interest in the function of these cells in tumors. However, the effect of BM-MSCs on colonization, a rate-limiting step of the metastatic cascade, is unknown. In this study, we investigated the effect of BM-MSCs on metastatic outgrowth of B16-F10 melanoma cells. In in vitro experiments, direct co-culture assays demonstrated that BM-MSCs stimulated the proliferation of B16-F10 cells in a dose-dependent manner. For in vivo experiments, luciferase-expressing B16-F10 cells were injected through tail vein and mice were subsequently treated with four systemic injections of BM-MSCs. In vivo bioluminescent imaging during 16 days demonstrated that BM-MSCs enhanced the colonization of lungs by B16-F10 cells, which correlated with a 2-fold increase in the number of metastatic foci. Flow cytometry analysis of lungs demonstrated that although mice harboring B16-F10 metastases displayed more endothelial cells, CD4 T and CD8 T lymphocytes in the lungs in comparison to metastases-free mice, BM-MSCs did not alter the number of these cells. Interestingly, BM-MSCs inoculation resulted in a 2-fold increase in the number of CD11b{sup +} myeloid cells in the lungs of melanoma-bearing animals, a cell population previously described to organize “premetastatic niches” in experimental models. These findings indicate that BM-MSCs provide support to B16-F10 cells to overcome the constraints that limit metastatic outgrowth and that these effects might involve the interplay between BM-MSCs, CD11b{sup +} myeloid cells and tumor cells. - Highlights: • BM-MSCs enhanced B16-F10 proliferation in a dose-dependent manner in vitro. • BM-MSCs facilitated lung colonization by B16-F10 melanoma cells. • BM-MSCs administration did not alter the number of endothelial cells and T lymphocytes in the lungs. • BM-MSCs enhanced

Bioactive Constituents of Zanthoxylum rhetsa Bark and Its Cytotoxic Potential against B16-F10 Melanoma Cancer and Normal Human Dermal Fibroblast (HDF Cell Lines

Directory of Open Access Journals (Sweden)

Ramesh Kumar Santhanam

2016-05-01

Full Text Available Zanthoxylum rhetsa is an aromatic tree, known vernacularly as “Indian Prickly Ash”. It has been predominantly used by Indian tribes for the treatment of many infirmities like diabetes, inflammation, rheumatism, toothache and diarrhea. In this study, we identified major volatile constituents present in different solvent fractions of Z. rhetsa bark using GC-MS analysis and isolated two tetrahydrofuran lignans (yangambin and kobusin, a berberine alkaloid (columbamine and a triterpenoid (lupeol from the bioactive chloroform fraction. The solvent fractions and purified compounds were tested for their cytotoxic potential against human dermal fibroblasts (HDF and mouse melanoma (B16-F10 cells, using the MTT assay. All the solvent fractions and purified compounds were found to be non-cytotoxic to HDF cells. However, the chloroform fraction and kobusin exhibited cytotoxic effect against B16-F10 melanoma cells. The presence of bioactive lignans and alkaloids were suggested to be responsible for the cytotoxic property of Z. rhetsa bark against B16-F10 cells.

Considerations Regardingthe Integration-Intrication Processin the Nature and Technology

Science.gov (United States)

Tecaru Berekmeri, Camelia Velia; Blebea, Ioan

2014-11-01

The big challenges in education and R&D activities in the century just started are related on the complexity and transdisciplinarity understanding and promotion.The approaches are necessary in order to understand the unity of the world we live in through the unity of knowledge.The complexity is the result of the integration process.The paper presents fundamentals of the integration-intrication process in the nature and technology.The concept of integronics and the basic principles of the integration process are outlined too. Also the main features of mechatronics as environment for transdisciplinarity learning and the concept of integral education promotion are presented.The advanced mechatronics and the embedded systems are fundamentals of the cyberphysical systems of the future

Technology Integration in Education: An Examination of Technology Adoption in Teaching and Learning by Secondary Teachers in Minnesota

Science.gov (United States)

Cherry, Jennifer E.

2014-01-01

The purpose of this study was to explore possible causal factors for level of teachers' adoption of technology in teaching and learning. Furthering the understanding of the factors related to teachers' technology adoption may facilitate increased levels of technology integration in the teaching and learning process. Based on previous research and…

76 FR 5834 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

Science.gov (United States)

2011-02-02

... Machines Corporation, Global Technology Services Business Unit, Integrated Technology Services, Cost and..., applicable to workers of International Business Machines Corporation, Global Technology Services Business... engaged in activities related to support for the Global Technology Services Business Unit. The company...

Advances in gallium arsenide monolithic microwave integrated-circuit technology for space communications systems

Science.gov (United States)

Bhasin, K. B.; Connolly, D. J.

1986-01-01

Future communications satellites are likely to use gallium arsenide (GaAs) monolithic microwave integrated-circuit (MMIC) technology in most, if not all, communications payload subsystems. Multiple-scanning-beam antenna systems are expected to use GaAs MMIC's to increase functional capability, to reduce volume, weight, and cost, and to greatly improve system reliability. RF and IF matrix switch technology based on GaAs MMIC's is also being developed for these reasons. MMIC technology, including gigabit-rate GaAs digital integrated circuits, offers substantial advantages in power consumption and weight over silicon technologies for high-throughput, on-board baseband processor systems. In this paper, current developments in GaAs MMIC technology are described, and the status and prospects of the technology are assessed.

High CpG island methylation of p16 gene and loss of p16 protein ...

Indian Academy of Sciences (India)

SI-JU GAO

The study subjects consisted of 75 healthy controls and 63 ToF ... Additionally, our analysis suggested that CpG island methylation in p16 promoters in ToF ..... reduced p16 protein expression in lung cancer (Kondo et al. 2006). In this context ..... promoter methylation in gastric carcinogenesis: a meta-analysis. Mol. Biol. Rep.

Functional Integration

Science.gov (United States)

Cartier, Pierre; DeWitt-Morette, Cecile

2010-06-01

Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

The Threat of Security: Hindering Technology Integration in the Classroom

Science.gov (United States)

Robinson, LeAnne K.; Brown, Abbie; Green, Tim

2007-01-01

For the last year the authors have been gathering examples of how perceived "threats of security" are hampering the integration of technology in teaching and learning. They hope that educators will examine both the challenges of increased security demands and ways in which security might enhance, rather than detract from, the use of technology for…

Handbook of Research on Innovative Technology Integration in Higher Education

Science.gov (United States)

Nafukho, Fredrick Muyia, Ed.; Irby, Beverly J., Ed.

2015-01-01

Our increasingly globalized world is driven by shared knowledge, and nowhere is that knowledge more important than in education. Now more than ever, there is a demand for technology that will assist in the spread of knowledge through customized, self-paced, and on-demand learning. The Handbook of Research on Innovative Technology Integration in…

Medical technology integration: CT, angiography, imaging-capable OR-table, navigation and robotics in a multifunctional sterile suite.

Science.gov (United States)

Jacob, A L; Regazzoni, P; Bilecen, D; Rasmus, M; Huegli, R W; Messmer, P

2007-01-01

Technology integration is an enabling technological prerequisite to achieve a major breakthrough in sophisticated intra-operative imaging, navigation and robotics in minimally invasive and/or emergency diagnosis and therapy. Without a high degree of integration and reliability comparable to that achieved in the aircraft industry image guidance in its different facets will not ultimately succeed. As of today technology integration in the field of image-guidance is close to nonexistent. Technology integration requires inter-departmental integration of human and financial resources and of medical processes in a dialectic way. This expanded techno-socio-economic integration has profound consequences for the administration and working conditions in hospitals. At the university hospital of Basel, Switzerland, a multimodality multifunction sterile suite was put into operation after a substantial pre-run. We report the lessons learned during our venture into the world of medical technology integration and describe new possibilities for similar integration projects in the future.

Integration of problem-based learning and innovative technology into a self-care course.

Science.gov (United States)

McFalls, Marsha

2013-08-12

To assess the integration of problem-based learning and technology into a self-care course. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Students' scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Integrating problem-based learning and technology into a self-care course enabled students to become active learners.

On Solid Ground: Science, Technology, and Integrated Land ...

International Development Research Centre (IDRC) Digital Library (Canada)

The Commission's Panel on Integrated Land Management was convened to explore how science and technology could contribute to the overall discussion of land management as part of the review by the Commission on Sustainable Development of the follow-up to the 1992 United Nations Conference on Environment and ...

Dynamic integrated assessment of bioenergy technologies for energy production utilizing agricultural residues: An input–output approach

International Nuclear Information System (INIS)

Song, Junnian; Yang, Wei; Higano, Yoshiro; Wang, Xian’en

2015-01-01

Highlights: • A dynamic input–output model is developed with bioenergy technologies complemented. • Availability of agricultural residues for bioenergy technologies is evaluated. • Trends in electricity and biofuel production are simulated dynamically. • Net profit and GHG mitigation contribution of bioenergy technologies are assessed. • Combustion power generation and briquette fuel are more advantageous. - Abstract: In order to facilitate regional agricultural residue utilization for energy production through bioenergy technologies, a dynamic input–output model is developed to estimate and assess the energy, economic and environmental performances of industrialization of five bioenergy technologies within a 15-year time horizon. Electricity and solid, gaseous and liquid biofuels are energy products of bioenergy technologies. Bioenergy technologies are complemented into regional input–output framework and combined with socioeconomic activities aided by their bottom-up economic and energy parameters. The simulation results for the target area indicate that the agricultural residues available for bioenergy technologies could amount to 55.16 million t, facilitating to 8.38 million t coal-equivalent bioenergy production by 2025. A 3.1% net reduction in accumulative greenhouse gas emission compared with the “business as usual” case could be achieved owing to substitution of fossil energy with electricity and biofuels produced by bioenergy technologies. From energy production, economic benefits and greenhouse gas mitigation three aspects integratedly, direct-combustion power generation and briquette fuel are more advantageous in the target area. The quantified energy, economic and environmental performances of bioenergy technologies are expected to give recommendations for their industrial development.

Recoil distance measurements of litetimes of levels in 2120F and 16N

International Nuclear Information System (INIS)

Kozub, R.L.; Mateja, J.F.; Lin, J.; Lister, C.J.; Olness, J.; Warburton, E.K.; Bynum, M.R.; Matthews, T.L.

1981-01-01

The previously-reported measurements of meanlives of 20 21 F levels using the recoil-distance method (RDM) and 18 O + 7 Li reactions have been repeated using improved experimental techniques. In addition, the lifetimes of two 16 N levels were measured, using the same experimental setup and 11 B + 7 Li reactions. Data were taken using the BNL precision plunger, in which were mounted a stretched Ta stopper foil (approx. 20 /sub cm 2 //sup mg/ thick) and a 300 μg/cm 2 - thick Li target condensed onto a stretched, 1.4 mg/cm 2 - thick Ta backing. Changes in target-to-stopper distance (d) could be controlled to an accuracy of about +- 1 μm, and were monitored by measuring target-to-stopper capacitance

Professional Development for International Teachers: Examining TPACK and Technology Integration Decision Making

Science.gov (United States)

Dalal, Medha; Archambault, Leanna; Shelton, Catharyn

2017-01-01

This mixed-methods study explored the impacts of a semester-long technology professional development for secondary school international teachers from developing nations around the world. We used (a) a survey approach to examine international teachers' perceived technology integration abilities using the technological pedagogical content knowledge…

The fluorine destruction in stars: First experimental study of the 19F(p,α)16O reaction at astrophysical energies

International Nuclear Information System (INIS)

La Cognata, M.; Mukhamedzhanov, A.; Spitaleri, C.; Indelicato, I.; Aliotta, M.; Burjan, V.; Cherubini, S.; Coc, A.; Gulino, M.; Hons, Z.; Kiss, G. G.; Kroha, V.; Lamia, L.; Mrazek, J.; Palmerini, S.; Piskor, S.; Pizzone, R. G.; Puglia, S. M. R.; Rapisarda, G. G.; Romano, S.

2012-01-01

The 19 F(p,α) 16 O reaction is an important fluorine destruction channel in the proton-rich outer layers of asymptotic giant branch (AGB) stars and it might also play a role in hydrogendeficient post-AGB star nucleosynthesis. So far, available direct measurements do not reach the energy region of astrophysical interest (E cm ∼ 300 keV), because of the hindrance effect of the Coulomb barrier. The Trojan Horse (TH) method was thus used to access this energy region, by extracting the quasi-free contribution to the 2 H( 19 F,α 16 O)n reaction. The TH measurement of the α 0 channel, which is the dominant one at such energies, shows the presence of resonant structures not observed before that cause an increase of the reaction rate at astrophysical temperatures up to a factor of 1.7, with potential important consequences for stellar nucleosynthesis.

The integration of Information and Communication Technology into nursing.

Science.gov (United States)

Lupiáñez-Villanueva, Francisco; Hardey, Michael; Torrent, Joan; Ficapal, Pilar

2011-02-01

To identify and characterise different profiles of nurses' utilization of Information and Communication Technology (ICT) and the Internet and to identify factors that can enhance or inhibit the use of these technologies within nursing. An online survey of the 13,588 members of the Nurses Association of Barcelona who had a registered email account in 2006 was carried out. Factor analysis, cluster analysis and binomial logit model was undertaken. Although most of the nurses (76.70%) are utilizing the Internet within their daily work, multivariate statistics analysis revealed two profiles of the adoption of ICT. The first profile (4.58%) represents those nurses who value ICT and the Internet so that it forms an integral part of their practice. This group is thus referred to as 'integrated nurses'. The second profile (95.42%) represents those nurses who place less emphasis on ICT and the Internet and are consequently labelled 'non-integrated nurses'. From the statistical modelling, it was observed that undertaking research activities an emphasis on international information and a belief that health information available on the Internet was 'very relevant' play a positive and significant role in the probability of being an integrated nurse. The emerging world of the 'integrated nurse' cannot be adequately understood without examining how nurses make use of ICT and the Internet within nursing practice and the way this is shaped by institutional, technical and professional opportunities and constraints. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

The Adoption and Integration of Technology Within the Classroom: Teacher Self-Efficacy Beliefs

Science.gov (United States)

Haight, Kevin W.

Many teachers are failing to incorporate technology into their classroom instruction. Researchers have reported a general failure in this regard; however, minimal study is available on the role of teacher self-efficacy in incorporating technology into pedagogy. This sequential, mixed-method study sought to discover whether a significant correlation exists between teacher self-efficacy and technology adoption within an urban K--12 school district. The conceptual framework for the research is grounded in Bandura's theory of self-efficacy. A sample of K--12 faculty members completed a 38-item Likert-type survey designed to measure self-efficacy as it relates to the integration of technology within the classroom. Quantitative data were analyzed using a Pearson product-moment correlation to identify relationships between self-efficacy and technology adoption. In the qualitative phase of the study, 6 participants were interviewed. Constant comparison was performed to analyze the transcribed interview data. The findings indicated a positive correlation between teacher self-efficacy and the integration of technology. The results provide valuable information needed to address the concerns and fears of teachers as they integrate technology into their classroom instruction. Implications for social change include providing educators and administrators with the needed data to develop the skills required to teach technology to their students. Acquiring technical skills will prepare students to become more competitive in a technology based society and for further educational endeavors.

The emergence and policy implications of converging new technologies integrated from the nanoscale

International Nuclear Information System (INIS)

Roco, M. C.

2005-01-01

Science based on the unified concepts on matter at the nanoscale provides a new foundation for knowledge creation, innovation, and technology integration. Convergent new technologies refers to the synergistic combination of nanotechnology, biotechnology, information technology and cognitive sciences (NBIC), each of which is currently progressing at a rapid rate, experiencing qualitative advancements, and interacting with the more established fields such as mathematics and environmental technologies (Roco and Bainbridge, 2002). It is expected that converging technologies will bring about tremendous improvements in transforming tools, new products and services, enable human personal abilities and social achievements, and reshape societal relationships.After a brief overview of the general implications of converging new technologies, this paper focuses on its effects on R and D policies and business models as part of changing societal relationships. These R and D policies will have implications on investments in research and industry, with the main goal of taking advantage of the transformative development of NBIC. Introduction of converging technologies must be done with respect of immediate concerns (privacy, toxicity of new materials, etc.) and longer-term concerns including human integrity, dignity and welfare. The efficient introduction and development of converging new technologies will require new organizations and business models, as well as solutions for preparing the economy, such as multifunctional research facilities, integrative technology platforms, and global risk governance

The emergence and policy implications of converging new technologies integrated from the nanoscale

Science.gov (United States)

Roco, M. C.

2005-06-01

Science based on the unified concepts on matter at the nanoscale provides a new foundation for knowledge creation, innovation, and technology integration. Convergent new technologies refers to the synergistic combination of nanotechnology, biotechnology, information technology and cognitive sciences (NBIC), each of which is currently progressing at a rapid rate, experiencing qualitative advancements, and interacting with the more established fields such as mathematics and environmental technologies (Roco & Bainbridge, 2002). It is expected that converging technologies will bring about tremendous improvements in transforming tools, new products and services, enable human personal abilities and social achievements, and reshape societal relationships. After a brief overview of the general implications of converging new technologies, this paper focuses on its effects on R&D policies and business models as part of changing societal relationships. These R&D policies will have implications on investments in research and industry, with the main goal of taking advantage of the transformative development of NBIC. Introduction of converging technologies must be done with respect of immediate concerns (privacy, toxicity of new materials, etc.) and longer-term concerns including human integrity, dignity and welfare. The efficient introduction and development of converging new technologies will require new organizations and business models, as well as solutions for preparing the economy, such as multifunctional research facilities, integrative technology platforms, and global risk governance.

The emergence and policy implications of converging new technologies integrated from the nanoscale

Energy Technology Data Exchange (ETDEWEB)

Roco, M. C. [National Science Foundation (United States)], E-mail: mroco@nsf.gov

2005-06-15

Science based on the unified concepts on matter at the nanoscale provides a new foundation for knowledge creation, innovation, and technology integration. Convergent new technologies refers to the synergistic combination of nanotechnology, biotechnology, information technology and cognitive sciences (NBIC), each of which is currently progressing at a rapid rate, experiencing qualitative advancements, and interacting with the more established fields such as mathematics and environmental technologies (Roco and Bainbridge, 2002). It is expected that converging technologies will bring about tremendous improvements in transforming tools, new products and services, enable human personal abilities and social achievements, and reshape societal relationships.After a brief overview of the general implications of converging new technologies, this paper focuses on its effects on R and D policies and business models as part of changing societal relationships. These R and D policies will have implications on investments in research and industry, with the main goal of taking advantage of the transformative development of NBIC. Introduction of converging technologies must be done with respect of immediate concerns (privacy, toxicity of new materials, etc.) and longer-term concerns including human integrity, dignity and welfare. The efficient introduction and development of converging new technologies will require new organizations and business models, as well as solutions for preparing the economy, such as multifunctional research facilities, integrative technology platforms, and global risk governance.

Opening speech annual meeting on nuclear technology 2013, 14 to 16 May 2013, Berlin, Germany

Energy Technology Data Exchange (ETDEWEB)

Gueldner, Ralf [Deutsches Atomforum e.V. (DAtF), Berlin (Germany)

2013-07-15

Germany is an important location for nuclear technology also in the face of the 'Energiewende'. Our industry is not merely the object of political decisions, but it also continues to make its reliable and safe contribution to supplying energy and to this country's prosperity. The 9 nuclear power plants connected to the grid are a pillar of the energy supply especially for baseload generation, with an installed power of 12,700 MW at an average availability of over 90 %. With almost 100 billion kilowatt hours generated annually, they contributed 1/6 of the electricity generated in Germany in 2012 and made Germany the second largest nuclear power producer in the European Union. The nuclear power plants ensure, as do the other large power plants, the regional voltage and frequency stability and with their good controllability and the large standard service volume make an important contribution to integrating the production of electricity from renewables which is very high by international comparison. Nuclear technology in Germany is not restricted to the dismantling, final storage and remaining operations of plants, but rather it is made up of a vigorous, competitive nuclear industry that is among the best in the world. That does not merely show in the ranking of the nuclear power plants with the highest output rates, which placed 4 German plants in the top ten in the world also in 2012. It also becomes apparent when nuclear technology Made in Germany is sought after all over the world, in particular where the level of safety is concerned, e.g. worldwide in improving the safety of plants after the accident at Fukushima. Quite a number of safety components that are just being ordered elsewhere have been tried and tested for years already in Germany, and are supplied, installed and serviced by German suppliers and service providers. The broad range of the nuclear industry in Germany and its backing in a diverse research landscape means that the products

Photon-induced cell migration and integrin expression promoted by DNA integration of HPV16 genome

Energy Technology Data Exchange (ETDEWEB)

Rieken, Stefan; Simon, Florian; Habermehl, Daniel; Dittmar, Jan Oliver; Combs, Stephanie E.; Weber, Klaus; Debus, Juergen; Lindel, Katja [University Hospital of Heidelberg, Department of Radiation Therapy and Radiation Oncology, Heidelberg (Germany)

2014-10-15

Persistent human papilloma virus 16 (HPV16) infections are a major cause of cervical cancer. The integration of the viral DNA into the host genome causes E2 gene disruption which prevents apoptosis and increases host cell motility. In cervical cancer patients, survival is limited by local infiltration and systemic dissemination. Surgical control rates are poor in cases of parametrial infiltration. In these patients, radiotherapy (RT) is administered to enhance local control. However, photon irradiation itself has been reported to increase cell motility. In cases of E2-disrupted cervical cancers, this phenomenon would impose an additional risk of enhanced tumor cell motility. Here, we analyze mechanisms underlying photon-increased migration in keratinocytes with differential E2 gene status. Isogenic W12 (intact E2 gene status) and S12 (disrupted E2 gene status) keratinocytes were analyzed in fibronectin-based and serum-stimulated migration experiments following single photon doses of 0, 2, and 10 Gy. Quantitative FACS analyses of integrin expression were performed. Migration and adhesion are increased in E2 gene-disrupted keratinocytes. E2 gene disruption promotes attractability by serum components, therefore, effectuating the risk of local infiltration and systemic dissemination. In S12 cells, migration is further increased by photon RT which leads to enhanced expression of fibronectin receptor integrins. HPV16-associated E2 gene disruption is a main predictor of treatment-refractory cancer virulence. E2 gene disruption promotes cell motility. Following photon RT, E2-disrupted tumors bear the risk of integrin-related infiltration and dissemination. (orig.) [German] Persistierende Infektionen mit humanen Papillomaviren 16 (HPV16) sind ein Hauptausloeser des Zervixkarzinoms. Die Integration der viralen DNS in das Wirtszellgenom fuehrt zum Integritaetsverlust des E2-Gens, wodurch in der Wirtszelle Apoptose verhindert und Motilitaet gesteigert werden. In

Computer aided process planning system based on workflow technology and integrated bill of material tree

Institute of Scientific and Technical Information of China (English)

LU Chun-guang; MENG Li-li

2006-01-01

It is extremely important for procedure of process design and management of process data for product life cycle in Computer Aided Process Planning (CAPP) system,but there are many shortcomings with traditional CAPP system in these respects.To solve these questions,application of workflow technology in CAPP system based on web-integrated Bill of Material (BOM) tree is discussed,and a concept of integrated BOM tree was brought forward.Taking integrated BOM as the thread,CAPP systematic technological process is analyzed.The function,system architecture,and implementation mechanism of CAPP system based on Browser/Server and Customer/Server model are expatiated.Based on it,the key technologies of workflow management device were analyzed.Eventually,the implementation mechanism of integrated BOM tree was analyzed from viewpoints of material information encoding,organization node design of integrated BOM tree,transformation from Engineering BOM (EBOM)to Process BOM (PBOM),and the programming implementation technology.

Technology integrated teaching in Malaysian schools: GIS, a SWOT analysis

Directory of Open Access Journals (Sweden)

Habibah Lateh, vasugiammai muniandy

2011-08-01

Full Text Available Geographical Information System (GIS has been introduced and widely used in schools in various countries. The year 1990 onwards, the implementation of GIS in schools showed an increase. This is due to the drastic changes and reforms in the education system. Even though the name GIS suits well to the Geography subject, but it is widely integrated in various subjects such as History, Chemistry, Physics and Science. In Malaysia, GIS is common in fields such as risk management, architecture, town planning and municipal department. Anyhow, it is still unknown in the school education system. Even upper secondary students are not familiar with GIS. The Ministry of Education in Malaysia has been continuously reforming the education towards the aim of creating a society based on economic fundamentals and knowledge. The Master Plan for Educational Development with the aim of developing individual potential with well-integrated and balanced education is already on field. Recently, Malaysia invested 18 % of the annual national budget towards upgrading its education system. The computer in education program started in 1999. Three hundred and twenty two schools were chosen as ‘break a way’ from conventional teaching method towards technology integrated teaching. Projects such as New Primary School Curriculum (KBSR, Integrated Secondary School Curriculum (KBSM, Smart School Project, School Access Centre were introduced constantly. Teacher as the cogwheel of innovations in schools were given courses in aim to develop their ICT knowledge and skill. To this date, the technology integration in subjects is not equal and it disperses through subjects. Geography is one of the ‘dry’ subjects in schools with less technology which is not preferable among students. Geographical Information System (GIS is foremost the best Geographical Information Technology (GIT to be implied in geography subject. In Malaysian Education System, GIS is still exposed just in papers

Inhibition of cell proliferation, migration and invasion of B16-F10 melanoma cells by α-mangostin

Energy Technology Data Exchange (ETDEWEB)

Beninati, Simone, E-mail: beninati@bio.uniroma2.it [Department of Biology, University “Tor Vergata”, Rome (Italy); Oliverio, Serafina [Department of Biology, University “Tor Vergata”, Rome (Italy); Cordella, Martina [Department of Hematology, Oncology and Molecular Medicine, Istituto Superiore di Sanità, Rome (Italy); Rossi, Stefania; Senatore, Cinzia [Regina Elena National Cancer Institute, Rome (Italy); Liguori, Immacolata; Lentini, Alessandro; Piredda, Lucia [Department of Biology, University “Tor Vergata”, Rome (Italy); Tabolacci, Claudio [Department of Biology, University “Tor Vergata”, Rome (Italy); Department of Hematology, Oncology and Molecular Medicine, Istituto Superiore di Sanità, Rome (Italy)

2014-08-08

Highlights: • We studied the anticancer potential of a new emerging molecule, α-mangostin (α-M). • We provide first evidences on the effects of α-M on transglutaminase activity. • We deeply examined the antimetastatic effects of α-M through many in vitro assays. • Proteomic analysis revealed that α-M promotes a reorganization at cellular level. - Abstract: In this study, we have evaluated the potential antineoplastic effects of α-mangostin (α-M), the most representative xanthone in Garcinia mangostana pericarp, on melanoma cell lines. This xanthone markedly inhibits the proliferation of high-metastatic B16-F10 melanoma cells. Furthermore, by deeply analyzing which steps in the metastatic process are influenced by xanthone it was observed that α-M strongly interferes with homotypic aggregation, adhesion, plasticity and invasion ability of B16-F10 cells, probably by the observed reduction of metalloproteinase-9 activity. The antiproliferative and antimetastatic properties of α-M have been established in human SK-MEL-28 and A375 melanoma cells. In order to identify pathways potentially involved in the antineoplastic properties of α-M, a comparative mass spectrometry proteomic approach was employed. These findings may improve our understanding of the molecular mechanisms underlying the anti-cancer effects of α-M on melanoma.

Strategic Technology Investment Analysis: An Integrated System Approach

Science.gov (United States)

Adumitroaie, V.; Weisbin, C. R.

2010-01-01

Complex technology investment decisions within NASA are increasingly difficult to make such that the end results are satisfying the technical objectives and all the organizational constraints. Due to a restricted science budget environment and numerous required technology developments, the investment decisions need to take into account not only the functional impact on the program goals, but also development uncertainties and cost variations along with maintaining a healthy workforce. This paper describes an approach for optimizing and qualifying technology investment portfolios from the perspective of an integrated system model. The methodology encompasses multi-attribute decision theory elements and sensitivity analysis. The evaluation of the degree of robustness of the recommended portfolio provides the decision-maker with an array of viable selection alternatives, which take into account input uncertainties and possibly satisfy nontechnical constraints. The methodology is presented in the context of assessing capability development portfolios for NASA technology programs.

Evaluating Instructor Technology Integration in Community and Technical Colleges: A Performance Evaluation Matrix

Science.gov (United States)

Del Favero, Marietta; Hinson, Janice M.

2007-01-01

The press for implementing technology based instructional delivery systems in community and technical colleges is well documented. Yet faculty face numerous challenges in integrating technology into instruction (AL-Bataineh & Brooks, 2003; Groves & Zemel, 2000; Khoury, 1997). Stimulating faculty ownership in technology, diffusion of technology use…

Integrated Electrical and Thermal Grid Facility - Testing of Future Microgrid Technologies

Directory of Open Access Journals (Sweden)

Sundar Raj Thangavelu

2015-09-01

Full Text Available This paper describes the Experimental Power Grid Centre (EPGC microgrid test facility, which was developed to enable research, development and testing for a wide range of distributed generation and microgrid technologies. The EPGC microgrid facility comprises a integrated electrical and thermal grid with a flexible and configurable architecture, and includes various distributed energy resources and emulators, such as generators, renewable, energy storage technologies and programmable load banks. The integrated thermal grid provides an opportunity to harness waste heat produced by the generators for combined heat, power and cooling applications, and support research in optimization of combined electrical-thermal systems. Several case studies are presented to demonstrate the testing of different control and operation strategies for storage systems in grid-connected and islanded microgrids. One of the case studies also demonstrates an integrated thermal grid to convert waste heat to useful energy, which thus far resulted in a higher combined energy efficiency. Experiment results confirm that the facility enables testing and evaluation of grid technologies and practical problems that may not be apparent in a computer simulated environment.

Health information technology: integration of clinical workflow into meaningful use of electronic health records.

Science.gov (United States)

Bowens, Felicia M; Frye, Patricia A; Jones, Warren A

2010-10-01

This article examines the role that clinical workflow plays in successful implementation and meaningful use of electronic health record (EHR) technology in ambulatory care. The benefits and barriers of implementing EHRs in ambulatory care settings are discussed. The researchers conclude that widespread adoption and meaningful use of EHR technology rely on the successful integration of health information technology (HIT) into clinical workflow. Without successful integration of HIT into clinical workflow, clinicians in today's ambulatory care settings will continue to resist adoption and implementation of EHR technology.

Integrating Oil Debris and Vibration Gear Damage Detection Technologies Using Fuzzy Logic

Science.gov (United States)

Dempsey, Paula J.; Afjeh, Abdollah A.

2002-01-01

A diagnostic tool for detecting damage to spur gears was developed. Two different measurement technologies, wear debris analysis and vibration, were integrated into a health monitoring system for detecting surface fatigue pitting damage on gears. This integrated system showed improved detection and decision-making capabilities as compared to using individual measurement technologies. This diagnostic tool was developed and evaluated experimentally by collecting vibration and oil debris data from fatigue tests performed in the NASA Glenn Spur Gear Fatigue Test Rig. Experimental data were collected during experiments performed in this test rig with and without pitting. Results show combining the two measurement technologies improves the detection of pitting damage on spur gears.

A 16X16 Discrete Cosine Transform Chip

Science.gov (United States)

Sun, M. T.; Chen, T. C.; Gottlieb, A.; Wu, L.; Liou, M. L.

1987-10-01

Among various transform coding techniques for image compression the Discrete Cosine Transform (DCT) is considered to be the most effective method and has been widely used in the laboratory as well as in the market, place. DCT is computationally intensive. For video application at 14.3 MHz sample rate, a direct implementation of a 16x16 DCT requires a throughput, rate of approximately half a billion multiplications per second. In order to reduce the cost of hardware implementation, a single chip DCT implementation is highly desirable. In this paper, the implementation of a 16x16 DCT chip using a concurrent architecture will be presented. The chip is designed for real-time processing of 14.3 MHz sampled video data. It uses row-column decomposition to implement the two-dimensional transform. Distributed arithmetic combined with hit-serial and hit-parallel structures is used to implement the required vector inner products concurrently. Several schemes are utilized to reduce the size of required memory. The resultant circuit only uses memory, shift registers, and adders. No multipliers are required. It achieves high speed performance with a very regular and efficient integrated circuit realization. The chip accepts 0-bit input and produces 14-bit DCT coefficients. 12 bits are maintained after the first one-dimensional transform. The circuit has been laid out using a 2-μm CMOS technology with a symbolic design tool MULGA. The core contains approximately 73,000 transistors in an area of 7.2 x 7.0

Mixed Waste Integrated Program interim evaluation report on thermal treatment technologies

International Nuclear Information System (INIS)

Gillins, R.L.; DeWitt, L.M.; Wollerman, A.L.

1993-02-01

The Mixed Waste Integrated Program (MWIP) is one of several US Department of Energy (DOE) integrated programs established to organize and coordinate throughout the DOE complex the development of technologies for treatment of specific waste categories. The goal of the MWIP is to develop and deploy appropriate technologies for -the treatment of DOE mixed low-level and alpha-contaminated wastes in order to bring all affected DOE installations and projects into compliance with environmental laws. Evaluation of treatment technologies by the MWIP will focus on meeting waste form performance requirements for disposal. Thermal treatment technologies were an early emphasis for the MWIP because thermal treatment is indicated (or mandated) for many of the hazardous constituents in DOE mixed waste and because these technologies have been widely investigated for these applications. An advisory group, the Thermal Treatment Working Group (TTWG), was formed during the program's infancy to assist the MWIP in evaluating and prioritizing thermal treatment technologies suitable for development. The results of the overall evaluation scoring indicate that the four highest-rated technologies were rotary kilns, slagging kilns, electric-arc furnaces, and plasma-arc furnaces. The four highest-rated technologies were all judged to be applicable on five of the six waste streams and are the only technologies in the evaluation with this distinction. Conclusions as to the superiority of one technology over others are not valid based on this preliminary study, although some general conclusions can be drawn

Building effective workforce management practices through shared governance and technology systems integration.

Science.gov (United States)

Krive, Jacob

2013-01-01

In integrated delivery networks (IDNs) with complex management structures, shared governance in nursing is a proven model for health care delivery. After Advocate Health Care, the largest IDN in Illinois, implemented shared governance in its nursing, clinical, and non-clinical departments and restructured the organization's technology use, it benefited greatly from a new, shared decision-making process. After listening to business consultants, clinical professionals, and information technology experts, hospitals should take the blended, or comprehensive, approach to new projects. They can succeed by promoting communication supported by an integrated computer platform that helps nursing and business executives reach a consensus. Traditional modes of operation, in which individual administrative, clinical, and technology departments separately introduce innovation, do not deliver an advantage. However, models that incorporate open communication, integration, and knowledge sharing will help large IDNs and other complex health care organizations make the best possible use of their resources and investments.

MODELS OF TECHNOLOGY ADOPTION: AN INTEGRATIVE APPROACH