WorldWideScience

Sample records for technology innovation process

  1. Introduction to Innovative Food Processing and Technology

    OpenAIRE

    Tokusoglu, Ozlem

    2015-01-01

    Consumers, the food industry and the regulatory agencies demand the innovative technologies to provide safe and stable foods. Nonthermal processing technologies offer unprecedented opportunities and challenges for the food industry to market safe, high quality health-promoting foods. Those innovative food processing is often perceived as an alternative to thermal food processing, yet there are many nonthermal preparatory unit operations as well as food processing and preservation opportunitie...

  2. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  3. Innovative Canadian Process Technology For Biodiesel Production

    Energy Technology Data Exchange (ETDEWEB)

    Johar, Sangat; Norton, Kevin

    2010-09-15

    The need for increasing renewable and alternative energy in the global energy mix has been well recognized by Governments and major scientific forums to reduce climate change impact for this living planet. Biodiesel has very high potential for GHG emission reduction. An innovative process developed in Canada provides solution to mitigate the feedstock, yield and quality issues impacting the industry. The Biox process uses a continuous process which reduces reaction times, provides > 99% yield of high quality biodiesel product. The process is feedstock flexible and can use cheaper higher FFA feedstock providing a sustainable approach for biodiesel production.

  4. Innovative Pedagogical Processes Involving Educational Technology

    DEFF Research Database (Denmark)

    Weitze, Charlotte Lærke

    it experimented with gamified learning designs. This involved the students designing digital games while implementing learning goals from their curriculum. The project thus created knowledge about which learning designs and competence development models were possible in this environment, which learning designs...... about how design and learning processes can support continuous pedagogical innovation and competence development. The objective of the learning designs was to create motivating learning experiences for the students in the hybrid synchronous video-mediated learning environment, to which end...

  5. Technological innovation: a structrational process view

    NARCIS (Netherlands)

    Fehse, K.I.A.; Wognum, P.M.

    1999-01-01

    The central aim of our research is to describe and explain how the introduction of a computer-based technology, which supports co-operative work in engineering departments, induces change processes. The employment of computer-based technologies in product development organisations to support co-oper

  6. Impact on technology transfer innovation processes: Ukrainian and foreign experience

    Directory of Open Access Journals (Sweden)

    Halyna Nahornyak

    2013-11-01

    Full Text Available The paper identified and reasonably effective mechanisms for technology transfer in Ukraine and several foreign countries. The analysis of the national and international technology transfer. It is shown that based on the experience of the transfer of innovative technologies in foreign countries, the priority areas of the state scientific and technical policy is to create conditions for innovation-based economic development and structural adjustment of industrial and technological sectors. The development of legislation affecting science and technology and innovation activity in Ukraine. Comparison of statistical data on the innovation process in the European Union and Ukraine. Investigated the technical and technological production in Ukraine, as well as the factors that hinder the development of innovations in the industry. Found effective mechanisms for technology transfer in foreign countries (USA, Germany, Japan, Russia. The role of technology transfer centres, public-private partnerships, long-term leasing of equipment, government contracts, the introduction of tax incentives to enterprises that carry out upgrading and development of new technologies. An effective means of technology transfer that will enhance innovation processes of enterprises in the innovation economy type.

  7. The Process of Accepting Technology Innovation for Rural Teachers

    Science.gov (United States)

    Cerovski, Jeremy

    2016-01-01

    In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

  8. Innovative Pedagogical Processes Involving Educational Technology

    DEFF Research Database (Denmark)

    Weitze, Charlotte Lærke

    it experimented with gamified learning designs. This involved the students designing digital games while implementing learning goals from their curriculum. The project thus created knowledge about which learning designs and competence development models were possible in this environment, which learning designs......This design-based research project investigates the elements, methods, processes and practices that can contribute to the creation of reflected, innovative and motivating learning designs for teachers and students in a hybrid synchronous video-mediated teaching context, with a focus on how...... to create motivating learning for the students. This was done by examining the three actors in the educational institution (students, teachers and the surrounding organisation) individually and relationally. The design-based research project developed knowledge in co-design processes with the three actors...

  9. Innovative Technologies for Science Data Processing

    Science.gov (United States)

    Ramachandran, R.; Conover, H. T.; Graves, S. J.; Keiser, K.; Smith, M. R.

    2001-05-01

    The Information Technology and Systems Center (ITSC) at the University of Alabama has long been active in information technology research applied to Earth science data. This poster will showcase three key technologies being developed by ITSC: the Earth Science Markup Language (ESML), data mining applied to Earth science data, and data set independent subsetting tools. Each of these technologies is designed to ease data handling by Earth scientists, thereby freeing their time for research. ESML uses the eXtensible Markup Language (XML) as the basis for standardizing metadata or information about data formats, thus facilitating development of search, visualization, and analysis tools that are independent of data type or format. A unique feature of ESML is that it not only describes the content and structure of the data, but also provides semantic information, which allows an application to intelligently interpret the data. Thus, ESML provides a means for working with legacy, current, and future data sets in an integrated fashion, by defining a standard for external metadata to describe the content, structure, and semantics of a file. The Algorithm Development and Mining (ADaM) system applies data mining technologies to Earth science remote sensing data and other spatial data sets. The ADaM system consists of a series of interoperable data readers, preprocessing and analysis modules, and data writers, which can be linked together in many ways to create customized mining processes. This system has been applied to several Earth science problems including tropical cyclone detection, cloud classification, lightning detection, and mesoscale convective system identification. Current research is adapting data mining technologies for real-time processing on board satellites. ITSC has also developed several tools for science data subsetting. The HDF-EOS Web-Based Subsetter (HEW) is designed to work on any properly formatted HDF-EOS swath or grid data file. UAH is working with

  10. Technological Innovation: Concept, Process, Typology and Implications in the Economy

    Directory of Open Access Journals (Sweden)

    Mihaela DIACONU

    2011-10-01

    Full Text Available Growing interest worldwide to boost innovation in business sector activities, especially the technology, is intended to maintain or increase national economic competitiveness, inclusively as an effect of awareness concerning the effects resulting from economic activity on consumption of resources and environment, which requires design of new patterns of production and consumption. In this paper we review the most important contributions in the literature in terms of the implications of technological innovation in the economy, at the microand macroeconomic level, viewing the organization's ability to generate new ideas in support of increasing production, employment and environmental protection, starting from the concepts of innovation, innovation process and, respectively, from the innovation typology analysis.

  11. The formalization of innovative processes of food technology equipment

    Directory of Open Access Journals (Sweden)

    V. A. Panfilov

    2016-01-01

    Full Text Available Improving the efficiency of scientific and engineering work to develop methods for converting agricultural raw materials into food is the most important condition of output processing and food sectors of agriculture in the sixth technological structure. The purpose of this article is to formalize the process of creating a progressive technique of food technologies. The process of self-organizing technological systems, presents a model of dual mechanism of control with regard to the processes of food technology. It is shown that in the process of adaptation development of the technological system as purposefully improving the structure and functioning of the system: increases the efficiency of interaction with the external environment. This smoothed out the contradictions of the technological system and its the main thing, the main technical contradiction: «productivity – quality». The steps to be taken to ensure that the technological system of conditions for intensive development. It is concluded that the potential development of some technological systems is hidden in the perspective of automation, and others – is associated with adaptive development processes, in particular machines, devices and bioreactors. The paper shows that innovative and truly breakthrough developments leading to the creation of fundamentally new equipment and new generations of technological systems, possible only with the establishment of patterns of organization, structure, functioning and development of open systems, which are modern technologies of agriculture. The mechanism of control of technological object acts as a core of adaptive development, which implements the anti-entropic entity management object, formalizing the innovation process of innovative food processing technologies.

  12. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  13. MANAGEMENT OF TECHNOLOGICAL INNOVATION PROCESSES IN AN ORGANIZATION ON THE BASIS OF COST APPROACH

    OpenAIRE

    Dokukina, I.

    2014-01-01

    The process of innovation management within the intensive economic development includes a number in a sequence of scientific, technological, industrial, institutional and commercial work, leading to an increase in its profits by increasing the productivity of labor and equipment, reducing production costs and improving product quality. In turn, technological innovation is an innovation in technology, improvements in technology, the use of fundamentally new technologies in the production of ma...

  14. Biodesign process and culture to enable pediatric medical technology innovation.

    Science.gov (United States)

    Wall, James; Wynne, Elizabeth; Krummel, Thomas

    2015-06-01

    Innovation is the process through which new scientific discoveries are developed and promoted from bench to bedside. In an effort to encourage young entrepreneurs in this area, Stanford Biodesign developed a medical device innovation training program focused on need-based innovation. The program focuses on teaching systematic evaluation of healthcare needs, invention, and concept development. This process can be applied to any field of medicine, including Pediatric Surgery. Similar training programs have gained traction throughout the United States and beyond. Equally important to process in the success of these programs is an institutional culture that supports transformative thinking. Key components of this culture include risk tolerance, patience, encouragement of creativity, management of conflict, and networking effects. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Management of the Technological Innovation Process in Software Companies from Sinaloa, Mexico

    Directory of Open Access Journals (Sweden)

    Alejandra MIRANDA FELIX

    2016-06-01

    Full Text Available The objective of this paper is to explain the management process of technological innovation within certified software companies from Sinaloa, considering their strategic technology plan, innovative processes, and intellectual capital. This work is based on the study of 9 software companies located in Sinaloa and certified through the CMMI (Capability Maturity Model for Integration process. Their problems are grouped into three areas: 1 strategic technology plan, 2 innovation and 3 intellectual capital. We propose a model of innovation management to explain and evaluate the integration of those three areas applying a mixed methodology, theoretical foundations, and the analysis of the results. The overall results reveal that the certified software companies from Sinaloa manage innovation informally, through an internal, costly and independent innovation process without considering alliances with other companies, educational institutions, government agencies, technology parks or research and development centers.

  16. INNOVATION PROCESSES: THE IMPACT IN THE FORM OF TECHNOLOGY, GOODS, LABOR PRODUCTIVITY

    Directory of Open Access Journals (Sweden)

    G. K. Kulakin

    2013-01-01

    Full Text Available The article presents the main results of the impact analysis, as well as innovation activities of enterprises and organizations engaged in technological innovation. The main task - to identify the most productive group of organizations engaged in innovation processes.

  17. Innovation processes in technologies for the processing of refractory mineral raw materials

    Science.gov (United States)

    Chanturiya, V. A.

    2008-12-01

    Analysis of the grade of mineral resources of Russia and other countries shows that end products that are competitive in terms of both technological and environmental criteria in the world market can only be obtained by the development and implementation of progressive technologies based on the up-to-date achievements of fundamental sciences. The essence of modern innovation processes in technologies developed in Russia for the complex and comprehensive processing of refractory raw materials with a complex composition is ascertained. These processes include (i) radiometric methods of concentration of valuable components, (ii) high-energy methods of disintegration of highly dispersed mineral components, and (iii) electrochemical methods of water conditioning to obtain target products for solving specific technological problems.

  18. Innovation process

    DEFF Research Database (Denmark)

    Kolodovski, A.

    2006-01-01

    Purpose of this report: This report was prepared for RISO team involved in design of the innovation system Report provides innovation methodology to establish common understanding of the process concepts and related terminology The report does not includeRISO- or Denmark-specific cultural, econom...

  19. Customer Innovation Process Leadership

    DEFF Research Database (Denmark)

    Lindgren, Peter; Jørgensen, Jacob Høj; Goduscheit, René Chester

    2007-01-01

    Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been...... on different types of organisational setup to the product development model and process. The globalization and enhanced competitive markets are however changing the innovation game and the challenge to innovation leadership Excellent product development innovation and leadership seems not any longer to enough...... another outlook to future innovation leadership - Customer Innovation Process Leadership - CIP-leadership. CIP-leadership moves the company's innovation process closer to the customer innovation process and discusses how companies can be involved and innovate in customers' future needs and lead...

  20. A Complexity Perspective on Innovation Processes for Subsea Technology Development

    Science.gov (United States)

    Aasen, Tone Merethe Berg

    2009-01-01

    In today's business thinking, innovation is commonly equated with progress, indicating an underlying assumption that company management have the power to choose a specific future and control the way into it. Drawing on examples from a longitudinal research initiative in the Norwegian petroleum company StatoilHydro, this article raises some of the…

  1. THE IMPLICATIONS OF INNOVATION PROCESS ON THE MARKETING OF HIGH-TECHNOLOGY PRODUCTS

    Directory of Open Access Journals (Sweden)

    BALASESCU SIMONA

    2013-12-01

    Full Text Available This paper highlights the role and importance of the Open Innovation Model on the marketing activity developed by the companies from the high-technology industry. In this area, the technology is advancing continuously and new products are appearing rapidly. Competition on high-tech market is very tough and not all companies have the resources to cope with change. For these companies, the ideal solution is to apply the Open Innovation Model. The paper includes some results of a qualitative marketing research which had as main objective finding the opinions of managers from high-tech industry regarding the need for innovation process and the choice of the most effective innovation strategies.

  2. Innovation processes in the field of energy technology; Innovationsprozesse bei Energietechnologien

    Energy Technology Data Exchange (ETDEWEB)

    Berwert, A.; Zehnder, M. [Ruetter und Partner, Rueschlikon (Switzerland); Markard, J.; Wirth, S. [Circus, EAWAG, Duebendorf (Switzerland)

    2008-06-15

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) examines the innovation process as described in a number of case studies. The case studies include three projects in the photovoltaics area - Flexcell, Oerlikon Solar and SolarMax - a combined heat and power project - SwissMotor - two heat-pump tumblers from Schulthess and V-Zug, two inverter projects - Drivetek and Vivatek and two projects in the wood gasification area - 'Pyroforce/CTU' and 'dasagren'. For each case study a short description, technological and organisational milestones and the environment in which the innovation work took place are noted, along with factors that helped or hindered innovation. Also, the basic aspects of each case are discussed. On the basis of this work, suggestions on how the innovation process can be enhanced are discussed.

  3. A Change Process at German University--Innovation through Information and Communication Technologies?

    Science.gov (United States)

    Zentel, Peter; Bett, Katja; Meister, Dorothee M.; Rinn, Ulrike; Wedekind, Joachim

    2004-01-01

    In this article, we describe the current situation of virtual universities in Germany and pursue the question of whether innovation processes taking place throughout the entire higher education landscape. Our study shows that the integration of ICT [information and communication technologies] not only changes the medial characteristics of the…

  4. Innovation processes of knowledge-based technologies. Example of PEM fuel cell; Innovationsprozesse wissensbasierter Technologien. Beispiel der PEM-Brennstoffzelle

    Energy Technology Data Exchange (ETDEWEB)

    Bertram, Bjoern

    2011-07-01

    Knowledge as distinguished from increasingly crucial factor of production and forms the basis for development of knowledge-based technologies. This study analyzed the example of the PEM fuel cell technology, this innovation process, drawing upon the heuristic of the innovation system. At the same time a detailed picture of the PEM technology as part of the electric mobility is drawn. (orig.)

  5. Customer Innovation Process Leadership

    DEFF Research Database (Denmark)

    Lindgren, Peter; Jørgensen, Jacob Høj; Goduscheit, René Chester

    2007-01-01

    Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been on diffe......Innovation leadership has traditionally been focused on leading the companies' product development fast, cost effectively and with an optimal performance driven by technological inventions or by customers´ needs. To improve the efficiency of the product development process focus has been...... to handle shorter and faster product life cycles. Continuously changing customer needs are pushing companies' competence of continuous innovation to a maximum - but still this seems not to be enough to stay competitive on the global market and reach the goals of growth. This article therefore suggests...... another outlook to future innovation leadership - Customer Innovation Process Leadership - CIP-leadership. CIP-leadership moves the company's innovation process closer to the customer innovation process and discusses how companies can be involved and innovate in customers' future needs and lead...

  6. EDUCATIVE INNOVATION PROCESS IN UNIVERSITY FORMATION, NEW PRODUCTIVE BESTS PRACTICES IN EDUCATIVE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Bartolomé Rubia-Avi

    2010-02-01

    Full Text Available The influence of educational innovation in the transformation of Spanish Universities to achieved the goals posed by the European Higher Education Area is a crucial aspect for this reform. This process of deep impact within the European countries is promoting the revision of traditional teaching methods. Small groups of teachers and communities of practice are leading this revision by reflecting upon the main issues affecting the higher education system at the same time that they propose horizontal innovations to overcome them. Information and Communication Technologies are becoming of special relevance with regard to the aforementioned innovations. This paper describes a experience conducted within the GSIC-EMIC research team that illustrates the efforts done by a community of teachers at the University of Valladolid (Spain to analyze and improve their own teaching practices.

  7. Geothermal innovative technologies catalog

    Energy Technology Data Exchange (ETDEWEB)

    Kenkeremath, D. (ed.)

    1988-09-01

    The technology items in this report were selected on the basis of technological readiness and applicability to current technology transfer thrusts. The items include technologies that are considered to be within 2 to 3 years of being transferred. While the catalog does not profess to be entirely complete, it does represent an initial attempt at archiving innovative geothermal technologies with ample room for additions as they occur. The catalog itself is divided into five major functional areas: Exploration; Drilling, Well Completion, and Reservoir Production; Materials and Brine Chemistry; Direct Use; and Economics. Within these major divisions are sub-categories identifying specific types of technological advances: Hardware; Software; Data Base; Process/Procedure; Test Facility; and Handbook.

  8. Results of innovative communication processes on productivity gains in a high technology environment

    Science.gov (United States)

    Kelly, B. J.

    1985-01-01

    The technology which resulted in performance breakthroughs at engineering and management services is discussed. As a result of the innovative approaches of communicating productivity concepts to the employees, specific outcomes can now be pinpointed at all levels of the organization such as: (1) employee-headed program; (2) performance feedback processes; and (3) an investigative approach to creating leadership. The Lockheed Corporation began the innovative trend in 1974 when they became the first company to introduce quality circles in America. Although some of Lockheed-EMSCO's processes may sound different from traditional improvement processes, the context out of which those to be presented evolved has sustained more than 10 years of positive results through employee involvement activities.

  9. 技术创新过程中风险探析%Risk Analysis in the Process of Technological Innovation

    Institute of Scientific and Technical Information of China (English)

    贾宁

    2011-01-01

    The technological innovation process is a long course and a kind of exploratory and creative economic activities.The technological innovation process is an uncertain process, which is full of all sorts of challenges and great risk.But the technology innovation is the wheels of progress of enterprise.%技术创新过程是一个长期的过程,是一种具有探索性,创造性的经济活动;是一个不确定的过程,充满各种挑战,风险极大,但技术创新却是企业前进的动力.

  10. Radically innovative steelmaking technologies

    Science.gov (United States)

    Szekely, Julian

    1980-09-01

    The steel industry is faced with serious problems caused by the increasing cost of energy, labor and capital and by tough overseas competition, employing new highly efficient process plants. The very high cost of capital and of capital equipment renders the construction of new green field site plants, exemplifying the best available technology economically unattractive. For this reason, over the long term the development radically innovative steelmaking technologies appears to be the only satisfactory resolution of this dilemma. The purpose of this article is to present a critical review of some of the radically innovative steelmaking technologies that have been proposed during the past few years and to develop the argument that these indeed do deserve serious consideration at the present time. It should be stressed, however, that these innovative technologies can be implemented only as part of a carefully conceived long range plan, which contains as a subset short term solutions, such as trigger prices improved investment credits, and so forth and intermediate term solutions, such as more extensive use of continuous casting, external desulfurization and selective modernization in general.

  11. Linking Organizational Structure, Technological Support and Process Innovation: the Mediating Role of Knowledge Sharing in the Iraqi Textile Industry

    Directory of Open Access Journals (Sweden)

    Al-Mamoori Amal Ghalib Rashid

    2015-01-01

    Full Text Available This paper investigates the relationships among organizational structure, technological support, knowledge sharing and process innovation and whether knowledge sharing has a mediating effect on these relationships. Based on the survey among employees in the Iraqi textile industry, the results revealed that organizational structure and technological support positively and significantly influence knowledge sharing. Knowledge sharing was also found to be an important mediator between organizational structure, support technology and process innovation. The findings bear implications to the Iraqi government’s call for innovation in the Iraqi textile industry.

  12. On-line process analysis innovation: DiComp (tm) shunting dielectric sensor technology

    Science.gov (United States)

    Davis, Craig R.; Waldman, Frank A.

    1993-01-01

    The DiComp Shunting Dielectric Sensor (SDS) is a new patent-pending technology developed under the Small Business Innovation Research Program (SBIR) for NASA's Kennedy Space Center. The incorporation of a shunt electrode into a conventional fringing field dielectric sensor makes the SDS uniquely sensitive to changes in material dielectric properties in the KHz to MHz range which were previously detectable only at GHz measurement frequencies. The initial NASA application of the SDS for Nutrient Delivery Control has demonstrated SDS capabilities for thickness and concentration measurement of Hoagland nutrient solutions. The commercial introduction of DiComp SDS technology for concentration and percent solids measurements in dispersions, emulsions and solutions represents a new technology for process measurements for liquids in a variety of industries.

  13. SCIENTIFIC AND TECHNOLOGICAL INNOVATION

    Directory of Open Access Journals (Sweden)

    Gabriel I. NASTASE

    2011-11-01

    Full Text Available Today, science and, accordingly, scientific research is widely recognized as the main driving force of production and source of innovation and technology transfer. There are many definitions in this regard that seek to express the concept of scientific research, experimental development (engineering and technical progress. Practically in the developed countries the phenomenon of innovation is being analyzed in relation to the concept of technology transfer, based on the experience and knowledge in science and technology. Innovation has to be addressed systematically, it involving: science, technology, financial and economic principles, management.

  14. Innovative Separations Technologies

    Energy Technology Data Exchange (ETDEWEB)

    J. Tripp; N. Soelberg; R. Wigeland

    2011-05-01

    Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

  15. Science, technology and environmental demands: innovations in oil refining process; Ciencia, tecnologia e demandas ambientais: inovacoes nos processos de refino

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Adalberto Mantovani Martiniano de [Universidade Estadual de Campinas, SP (Brazil). Inst. de Geociencias. Programa de Pos-graduacao do Departamento de Politica Cientifica e Tecnologica

    2003-07-01

    This paper consists in a survey about changes in oil refining technologies caused by an increase of external environmental restrictions, that create demands for innovations related to the reduction of environmental impacts in refining processes and products. The environmental restrictions considered in this paper include state regulation, like the control over solid and gas wastes and the control over levels of air pollutants on refined products. Another group of restrictions include market restrictions, mainly the restrictions for obtaining 'green' quality labels, like ISO 14000. The paper will show the main environmental restrictions for the Paulinia Refinery (REPLAN), and its reaction in introducing innovations in refining processes. Some aspects of the innovations observed will be described, like the kind of innovation (process or product), the institutions that created innovations and their resources, the knowledge fields applied, and another characteristics for the evaluation of environmental influence over the development on oil refining innovations. (author)

  16. Launching technological innovations

    DEFF Research Database (Denmark)

    Talke, Katrin; Salomo, Søren

    2009-01-01

    have received less attention. This study considers the interdependencies between strategic, internally and externally, directed tactical launch activities and investigates both direct and indirect performance effects. The analysis is based upon data from 113 technological innovations launched...

  17. Innovation Chinese rice wine brewing technology by bi-acidification to exclude rice soaking process.

    Science.gov (United States)

    Wei, Xiao Lu; Liu, Shuang Ping; Yu, Jian Shen; Yu, Yong Jian; Zhu, Sheng Hu; Zhou, Zhi Lei; Hu, Jian; Mao, Jian

    2017-04-01

    As a traditional fermented alcoholic beverage of China, Chinese rice wine (CRW) had a long history of more than 5000 years. Rice soaking process was the most crucial step during CRW brewing process, because rice soaking quality directly determined the quality of CRW. However, rice soaking water would cause the eutrophication of water bodies and waste of water. The longer time of rice soaking, the higher the content of biogenic amine, and it would have a huge impact on human health. An innovation brewing technology was carried out to exclude the rice soaking process and the Lactobacillus was added to make up for the total acid. Compared to the traditional brewing technology, the new technology saved water resources and reduced environmental pollution. The concentration of biogenic amine was also decreased by 27.16%, which improving the security of the CRW. The esters increased led to more soft-tasted CRW and less aging time; the quality of CRW would be improved with less alcohol.

  18. Energy Technology Innovation

    DEFF Research Database (Denmark)

    Brix, Jacob

    2015-01-01

    Anmeldelse af bogen: Energy Technology Innovation – Learning from Historical Successes and Failures, A. Grubler, C. Wilson (eds.) Cambridge University Press, New York (2014) 387p., ISBN: 978-1-107-02322-2......Anmeldelse af bogen: Energy Technology Innovation – Learning from Historical Successes and Failures, A. Grubler, C. Wilson (eds.) Cambridge University Press, New York (2014) 387p., ISBN: 978-1-107-02322-2...

  19. Innovating Technological Process for Expanding the Service Life of Underground Power Cables

    Directory of Open Access Journals (Sweden)

    Tabacaru V.

    2016-08-01

    Full Text Available As a public power distribution operator on low voltage (023/0.4 kV, medium voltage (6 and 20 kV, and high voltage (110 kV in the territory of Galati County, SDEE Galati serves approximately 240,000 consumers (captive and eligible, domestic and non-domestic For this purpose, in the field of medium voltage underground distribution lines, SDEE Galati manages and operates a volume of approx. 500 km UDL/6kV circuit and approximately 630 km UDL/20 kV circuit. Many of these cables which are still in operation, were manufactured with materials and on the technological level of the ’60s,’70s and ‘80s decades and have reached the end of their service life. Evidence does and incident statistics from these networks in which, every year, one of the "tips" is the medium voltage cables damaged "technical wear" normal operating conditions. The current paper will present the main features of an innovating technological process called SPR (Sustained Pressure Rejuvenation, designed for on-site refurbishing of underground power cable insulation medium and high voltage. The process offers a viable alternative that has proven, over the 25 years of application initially on the American content and now on the worldwide, substantially more cost effective than replacing cables. The paper does not propose detailed presentation of the technological process, but to inform the family of energetics NPS about the existence and the benefits of applying this new technological process to the old cable medium and high voltage.

  20. Summary of innovative concepts for industrial process improvement: An experimental technology exchange

    Energy Technology Data Exchange (ETDEWEB)

    Conger, R.L. [Pacific Northwest Lab., Richland, WA (United States); Lee, V.E.; Buel, L.M. [eds.] [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01

    This document is a compilation of one-page technical briefs that summarize the highlights of thirty-eight innovations that were presented at the seventh Innovative Concepts Fair, held in Denver, Colorado on April 20--21, 1995. Sixteen of the innovations were funded through the Innovative Concepts Program, and twenty-two innovations represent other state or federally funded programs. The concepts in this year`s fair addressed innovations that can substantially improve industrial processes. Each tech brief describes the need for the proposed concept; the concept being proposed; and the concept`s economics and market potential, key experimental results, and future development needs. A contact block is also included with each flier.

  1. Technological Innovation of Agricultural Products Processing Enterprises from the Perspective of Modern Marketing——A Case of Agricultural Products Processing Enterprises in Hubei Province,China

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The science and technology development of agricultural products processing enterprises in Hubei Province is analyzed.From the perspective of modern marketing,problems in the research and development work of agricultural products processing enterprises are analyzed from the aspects of market,personal training and technology radiation,which are mainly the lack of close connection with market.Countermeasures for the technological innovation of agricultural products processing enterprises are put forward,such as establishing modern enterprise culture with innovative features,strengthening the market benefits of brand,constructing a comprehensive customer orientation information platform,scientifically predicting and developing the market,doing well in market positioning of enterprise,selecting corresponding technology innovation strategy,taking technological innovation strategy as the basis,realizing the transformation from "4P" marketing combination to "4C",cultivating technical personnel,and realizing the integration of professional skill and marketing ability.

  2. Technological innovation and convergent journalism. Case study on the transformation process of Bavaria’s public broadcasting service

    Directory of Open Access Journals (Sweden)

    Klaus MEIER

    2017-01-01

    Full Text Available As a consequence of technological innovations and their social utilisation, media organisations and newsrooms are undergoing a fundamental transformation process. This article analyses the interrelations between technological innovations and the challenges of convergent journalism. Studies conducted on newsroom convergence to date set out from one-sided influences: They investigated the extent to which technical innovations determine the newsrooms, or whether journalistic structures and long-range trends are so strong as to largely obstruct the adoption of new technologies in journalism. Therefore technology — especially in studies carried out on newsroom convergence — is considered as an influencing factor on somehow resisting or non-resisting newsrooms. We broaden the scope of this investigation by considering that any such influence might not come exclusively from technology, but that impulses can come also from innovative newsrooms: technological gaps, wishes and obstacles are identified from the journalist's viewpoint and brought to the attention of the developers of newsroom technologies — on the basis of empirical research findings from a case study of Bavaria’s public broadcasting service, Bayerischer Rundfunk (BR. With its 5.000 employees, BR is one of Germany's largest media organisations. It is undergoing a fundamental and long-term convergence process. A variety of gaps, problems and wishes came to light from 25 in-depth interviews with journalists working on innovative projects. For example, criticism is expressed of complicated, partly unknown or non-existent networking of cross-media production systems. There is a desire for the increased use of consumer devices like smartphones in professional news production. There exists a creative potential for innovative solutions, but these are not comprehensively evaluated. To date, there has been no systematic implementation of the findings of innovative media projects in everyday

  3. INNOVATIVE TECHNOLOGY FOR THE PRODUCTION OF FOOD ADDITIVES FROM PUMPKIN PROCESSING SECONDARY RESOURCES

    Directory of Open Access Journals (Sweden)

    Kupin G. A.

    2016-09-01

    Full Text Available The article presents data characterizing the composition of macro and micronutrients from secondary resources of pumpkin processing – pumpkin pomace. We have found that extracts of pumpkin are valuable raw materials for the production of food additives, as they contain proteins, dietary fiber, including pectin and protopectin, minerals, as well as such biologically active substances as vitamin C, β- carotene and P-active substances using nuclear magnetic relaxation, it is shown that pretreatment of pomace pumpkin in the microwave electromagnetic field of certain parameters before IR drying allows to transfer part of the bound moisture free moisture, that allows to intensify the subsequent process IR drying. We have developed an innovative technology of production of food supplements from pumpkin extracts, which is protected by Russian patent for the invention and having the “know-how” status. The article presents data describing the organoleptic and physical and chemical indicators of quality nutritional supplements, formulated according to the developed technological regimes

  4. Technology, Innovation and Knowledge

    DEFF Research Database (Denmark)

    Andersson, Ulf; Dasi, Angels; Mudambi, Ram

    2016-01-01

    The relevance of ideas is at the core of the IB field and has been captured in concepts like technology, innovation and knowledge. While these concepts have evolved over the last decades, the point that the ideas and the international connectivity are central for IB remains genuine. This paper...... is an attempt to take stock of the evolution of the concepts technology, innovation and knowledge in IB literature along the past five decades with a particular focus on the role of the Columbia Journal of World Business (CJWB) and the Journal of World Business (JWB) in this evolution. Likewise, our objective...

  5. Methodological Grounds of Formation of the Scorecard of Diagnostics of the Innovation Component of Technological Processes of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Zhezhuha Volodymyr Yo.

    2014-01-01

    Full Text Available The goal of the article is development of scientific provisions with respect of methodological specific features of formation of the scorecard of diagnostics of the innovation component of technological processes of industrial enterprises. The article proves fragmentariness of views of theoreticians and practitioners on this problem. It justifies a necessity of formation of these indicators from the point of view of a system approach, consequently, accounting of all interconnections and interdependencies between them, and also coverage of main factors that identify the diagnosed innovation component. Pursuant to result of the study the article specifies system properties of the scorecard of diagnostics of the innovation component of technological processes of industrial enterprises. It reveals a possibility of application of two alternative approaches to formation of this scorecard, and also establishes their advantages and shortcomings. It gives a number of requirements, which have to be met when selecting, developing and forming the scorecard of diagnostics of the innovation component of technological processes of industrial enterprises. It reflects key issues that should form the basis of the methodological approach to formation of this system. It shows typology of indicators of diagnostics of the innovation component of technological processes of industrial enterprises, which gives subjects of diagnostics a possibility to select relevant indicators depending on the set criteria and restrictions. Prospects of further studies in this direction should lie in development of the system of a specific scorecard of diagnostics of each innovation component of technological processes of industrial enterprises with consideration of methodological specific features of its formation described in the article.

  6. Global Health Innovation Technology Models

    Directory of Open Access Journals (Sweden)

    Kimberly Harding

    2016-04-01

    Full Text Available Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC research collaborators directly prevent the growth of sustainable Global Health innovation for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utilizing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to accelerate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

  7. Logistics Innovation Process Revisited

    DEFF Research Database (Denmark)

    Gammelgaard, Britta; Su, Shong-Iee Ivan; Yang, Su-Lan

    2011-01-01

    innovation process model may include not just customers but also suppliers; logistics innovation in buyer-supplier relations may serve as an alternative to outsourcing; logistics innovation processes are dynamic and may improve supplier partnerships; logistics innovations in the supply chain are as dependent...... into the process of a logistics innovation in an oriental healthcare supply chain context. The study is, however, still limited in disclosing end-to-end supply chain benefits including concrete performance improvements at the suppliers. Examining logistics innovation processes should result not only......Purpose – The purpose of this paper is to learn more about logistics innovation processes and their implications for the focal organization as well as the supply chain, especially suppliers. Design/methodology/approach – The empirical basis of the study is a longitudinal action research project...

  8. Innovation, Technology and Knowledge

    OpenAIRE

    Johansson, Börje; Karlsson, Charlie; Norman, Therese

    2011-01-01

    This paper outlines a set of fundamental changes in the global economy that have altered the nature of the innovation process, brought about global challenges, and stimulated cross border phenomena and network formation responses. These changes has brought about an increase of the demand for knowledge as well as changed the conditions for knowledge production and innovation. Against the background of a changing global economy, the purpose of the paper is to make an overview over the role and ...

  9. Staging Collaborative Innovation Processes

    DEFF Research Database (Denmark)

    Pedersen, Signe; Clausen, Christian

    Organisations are currently challenged by demands for increased collaborative innovation internally as well as with external and new entities - e.g. across the value chain. The authors seek to develop new approaches to managing collaborative innovative processes in the context of open innovation...... and public private innovation partnerships. Based on a case study of a collaborative design process in a large electronics company the paper points to the key importance of staging and navigation of collaborative innovation process. Staging and navigation is presented as a combined activity: 1) to translate...

  10. Technological Innovation and Teaching Methods

    Science.gov (United States)

    Riboli, Maria Cristina

    The wide diffusion of information technology brins generally changes in any field of society. In universities, the teaching approach must conform itself to these new needs adding the information technology tools into the learning process. A multi-disciplinary technical team of Florence University was set up a project involving technical staff developer, educational technologist and web developer and has pointed out issues concerning hardware, software, technical methods and knowledge required by these innovations.

  11. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Larisa Alexejevna Ismagilova

    2016-12-01

    Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

  12. The Influence of Technology Transfers on the Development of Innovations in the Process Industry of Croatia (Istrian County Case

    Directory of Open Access Journals (Sweden)

    Marinko Škare

    2015-06-01

    Full Text Available This paper studies the influence of technology transfers on the development of innovations in the process industry in Croatia (Istrian County case. The technological regime identifies characteristics of the learning processes, sources of knowledge and the nature of knowledge bases linked to the innovative process in the company happening as part of production activities. The research supports Schumpeter’s standpoint in his theory of creative destruction. When a new and more efficient design for the production of a commodity is created, the enterprise that first starts using the new design conquer a part of its competitors’ market. The competition reacts either by introducing the same design or one even newer or completely loses the market, as this is the case in the process industry in Croatia.

  13. Campus Technology Innovators Awards 2010

    Science.gov (United States)

    Lloyd, Meg; Raths, David

    2010-01-01

    Each year in judging the Campus Technology Innovators awards, the authors have the privilege of reading through hundreds of fascinating examples of technology innovation on campus. Nominated projects cover the gamut of technology areas, from assessment and advising to wireless and web 2.0. This article presents 11 innovator award winners of this…

  14. Unmet needs: relevance to medical technology innovation?

    Science.gov (United States)

    McCarthy, Avril D; Sproson, Lise; Wells, Oliver; Tindale, Wendy

    2014-01-01

    This paper describes and discusses the role of unmet needs in the innovation of new medical technologies using the National Institute for Health Research Devices for Dignity (D4D) Healthcare Technology Co-operative as a case study. It defines an unmet need, providing a spectrum of classification and discusses the benefits and the challenges of identifying unmet need and its influence on the innovation process. The process by which D4D has captured and utilized unmet needs to drive technology innovation is discussed and examples given. It concludes by arguing that, despite the challenges, defining and reviewing unmet need is a fundamental factor in the success of medical technology innovation.

  15. Global Health Innovation Technology Models

    Directory of Open Access Journals (Sweden)

    Kimberly Harding

    2016-04-01

    Full Text Available Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC research collaborators directly prevent the growth of sustainable Global Health innova‐ tion for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utiliz‐ ing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to acceler‐ ate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

  16. Smart space technology innovations

    CERN Document Server

    Chen, Mu-Yen

    2013-01-01

    Recently, ad hoc and wireless communication technologies have made available the device, service and information rich environment for users. Smart Space and ubiquitous computing extend the ""Living Lab"" vision of everyday objects and provide context-awareness services to users in smart living environments. This ebook investigates smart space technology and its innovations around the Living Labs. The final goal is to build context-awareness smart space and location-based service applications that integrate information from independent systems which autonomously and securely support human activ

  17. Technology Matters - When new technology reshape innovation

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    Management of innovation is an important issue for firms and being good at this may be the deciding difference between death and survival. This paper ar-gues, based on 12 case studies, that new technology influence the innovative ca-pability of firms and disturbingly the process appears...... the firm, which over time becomes a source of innovation. However, through adoption of this new technology firms engage in a mu-tual learning and forming process where the firm learn by using the new technol-ogy. When learning, the firm and the new technology is mutually formed as the firm tries to adopt...... not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...

  18. Studying Innovation Technologies in Modern Education

    Science.gov (United States)

    Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

    2016-01-01

    In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

  19. Measuring Consumer Innovativeness: Identifying Innovators among Consumers of Modern Technologies

    Directory of Open Access Journals (Sweden)

    Jana Filová

    2015-12-01

    Full Text Available The methods currently used in innovation marketing research are focused on the late phases of the innovation process and are usually methodologically complex. This limits their practical impact. The presented work aims to create a simple self-report scale applicable in the initial and late phases of the innovation process, highly modular and suitable for a wide range of research. The main battery of questions was inspired by the adopter categorization by Rogers. The questions determine both (1 general characteristics of innovation adopters and (2 their relationship to a specific innovation. The scale was tested during robust longitudinal online research, thematically focused on users of modern technologies. A representative sample of 4,000 Internet users in the Czech Republic took part in the survey from 2013 to 2015. The result is a new self-report scale measuring consumer innovativeness applicable for prototyping, strategic decisions and effective communication of innovations to consumers.

  20. Technological Innovation, R & D Activities and Innovation System Between Organizations

    Directory of Open Access Journals (Sweden)

    Jonas Pedro Fabris

    2015-08-01

    Full Text Available This theoretical paper aimed to explicit, through the rescue of theoretical assumptions, the innovation, the innovation system, and the research and development (R & D activities. The innovation, especially technological innovation, is now seen as essential in differentiation strategies, competitiveness and growth in a greater number of businesses. Innovation is not only the result of financial investments by companies. For it to exist, it is necessary the existence of innovative capacity that should be present at all stages of the innovation process, and a favorable institutional environment and, increasingly, of specific incentive policies. That is, there are internal and external factors to companies and other institutions involved in the process. Innovation systems were discovered to resolve the variations in the degree of competitiveness of different economies and, above all, in relation to the technological performance and the ability to innovate these economies face the growing importance of international markets for high-tech products. Thus, it was found that successful innovators are not successful just because of their personal qualities and actions but as a result of their interaction with research and innovation systems that inhabit the quality of such systems.

  1. Technological Innovations from NASA

    Science.gov (United States)

    Pellis, Neal R.

    2006-01-01

    The challenge of human space exploration places demands on technology that push concepts and development to the leading edge. In biotechnology and biomedical equipment development, NASA science has been the seed for numerous innovations, many of which are in the commercial arena. The biotechnology effort has led to rational drug design, analytical equipment, and cell culture and tissue engineering strategies. Biomedical research and development has resulted in medical devices that enable diagnosis and treatment advances. NASA Biomedical developments are exemplified in the new laser light scattering analysis for cataracts, the axial flow left ventricular-assist device, non contact electrocardiography, and the guidance system for LASIK surgery. Many more developments are in progress. NASA will continue to advance technologies, incorporating new approaches from basic and applied research, nanotechnology, computational modeling, and database analyses.

  2. Process innovation laboratory

    DEFF Research Database (Denmark)

    Møller, Charles

    2007-01-01

    Most organizations today are required not only to operate effective business processes but also to allow for changing business conditions at an increasing rate. Today nearly every business relies on their enterprise information systems (EIS) for process integration and future generations of EIS...... will increasingly be driven by business process models. Consequently business process modelling and improvement is becoming a serious challenge. The aim of this paper is to establish a conceptual framework for business process innovation (BPI) in the supply chain based on advanced EIS. The challenge is thus...... to create a new methodology for developing and exploring process models and applications. The paper outlines the process innovation laboratory as a new approach to BPI. The process innovation laboratory is a comprehensive framework and a collaborative workspace for experimenting with process models...

  3. Teaching biomedical technology innovation as a discipline.

    Science.gov (United States)

    Yock, Paul G; Brinton, Todd J; Zenios, Stefanos A

    2011-07-20

    Recently, universities in the United States and abroad have developed dedicated educational programs in life science technology innovation. Here, we discuss the two major streams of educational theory and practice that have informed these programs: design thinking and entrepreneurship education. We make the case that the process of innovation for new medical technologies (medtech) is different from that for biopharmaceuticals and outline the challenges and opportunities associated with developing a discipline of medtech innovation.

  4. Game-like Technology Innovation Education

    DEFF Research Database (Denmark)

    Magnussen, Rikke

    2011-01-01

    scenario designed for technology education in grades 7 - 9 in Danish schools. In the paper, methodological challenges of doing design-based research into technology innovation education are discussed. The preliminary results from the first studies of a game-inspired technology innovation camp are also......  The aim of this paper is to discuss the first results and methodological challenges and perspectives of designing game-inspired scenarios for implementation of innovation processes into schools' science education. This paper comprises and report on a case study of a game-inspired innovation...

  5. Making technological innovation work for sustainable development.

    Science.gov (United States)

    Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G; Matus, Kira; Moon, Suerie; Murthy, Sharmila L; Clark, William C

    2016-08-30

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset.

  6. Processes of Institutional Innovation

    DEFF Research Database (Denmark)

    Boxenbaum, Eva; Acquier, Aurélien; Pinheiro, Rebecca

    How does innovation come about in a highly institutionalized field like the construction sector? The construction sector is characterized by relatively rigid routines, strong professional boundaries, clear division of labor, and elaborate national legislation. It tends to lag behind other sectors...... of the economy when it comes to innovation, being perceived as mechanically responding to external (client) needs and as implementing innovations that originate elsewhere (Winch 1998, Harty 2008). Sustainable construction represents a remarkable break with this tradition with strong ambitions to boost...... construction in terms of its economic, environmental and social performance. In sustainable construction, new technologies are appearing, new 'best practices' are being formulated, and new managerial systems and labels are being introduced. For instance, innovations like zeroenergy housing and eco...

  7. Processes of Institutional Innovation

    DEFF Research Database (Denmark)

    Boxenbaum, Eva; Acquier, Aurélien; Pinheiro, Rebecca;

    How does innovation come about in a highly institutionalized field like the construction sector? The construction sector is characterized by relatively rigid routines, strong professional boundaries, clear division of labor, and elaborate national legislation. It tends to lag behind other sectors...... of the economy when it comes to innovation, being perceived as mechanically responding to external (client) needs and as implementing innovations that originate elsewhere (Winch 1998, Harty 2008). Sustainable construction represents a remarkable break with this tradition with strong ambitions to boost...... construction in terms of its economic, environmental and social performance. In sustainable construction, new technologies are appearing, new 'best practices' are being formulated, and new managerial systems and labels are being introduced. For instance, innovations like zeroenergy housing and eco...

  8. INNOVATIVE SOLUTIONS IN GRAINDRYING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    D. A. Britikov

    2012-01-01

    Full Text Available Heat pump oil-plants grain drying and storage innovative technology providing product quality increase, energy consumption decrease and environmental safety is scientifically grounded.

  9. Sustainable development through process innovation

    NARCIS (Netherlands)

    Sleeman, E.; Oonk, J.; Krist-Spit, mw. C.E.

    1998-01-01

    Innovation of processes is one of the corner stones of sustainable development. Innovation may be characterized by the degree of intervention in the existing basematerials-processes-products chains. Four types of innovation are distinguished [1]:

  10. Innovations in Radiotherapy Technology.

    Science.gov (United States)

    Feain, I J; Court, L; Palta, J R; Beddar, S; Keall, P

    2017-02-01

    Many low- and middle-income countries, together with remote and low socioeconomic populations within high-income countries, lack the resources and services to deal with cancer. The challenges in upgrading or introducing the necessary services are enormous, from screening and diagnosis to radiotherapy planning/treatment and quality assurance. There are severe shortages not only in equipment, but also in the capacity to train, recruit and retain staff as well as in their ongoing professional development via effective international peer-review and collaboration. Here we describe some examples of emerging technology innovations based on real-time software and cloud-based capabilities that have the potential to redress some of these areas. These include: (i) automatic treatment planning to reduce physics staffing shortages, (ii) real-time image-guided adaptive radiotherapy technologies, (iii) fixed-beam radiotherapy treatment units that use patient (rather than gantry) rotation to reduce infrastructure costs and staff-to-patient ratios, (iv) cloud-based infrastructure programmes to facilitate international collaboration and quality assurance and (v) high dose rate mobile cobalt brachytherapy techniques for intraoperative radiotherapy. Copyright © 2016 The Royal College of Radiologists. All rights reserved.

  11. Rethinking the Market - Technology Relationship for Innovation

    DEFF Research Database (Denmark)

    Howells, John

    This paper revisits the 'what causes innovation - market pull or technology push?' debate to argue that the conceptualisation is flawed and that the firm is the only 'agent' capable of innovative action. The paper differentiates between 'use', 'need' and 'intended use' to obtain greater precision...... with respect to the technology-market matching process that is fundamental to innovation. The validity of the approach is demonstrated through empirical examples. These examples also show the value of distinguishing between two types of market concept used by the innovating firm. These are the 'reference...... market' which is a traded product that is a principal source of 'use' ideas for the mental construction of the 'innovation market' concept. It is the latter that can be thought to guide the construction of innovative production technology....

  12. Technological Innovations in Forensic Genetics

    DEFF Research Database (Denmark)

    Wienroth, Matthias; Morling, Niels; Williams, Robin

    2014-01-01

    This paper discusses the nature of four waves of technological innovations in forensic genetics alongside the social, legal and ethical aspect of these innovations. It emphasises the way in which technological advances and their socio-legal frameworks are co-produced, shaping technology expectati......This paper discusses the nature of four waves of technological innovations in forensic genetics alongside the social, legal and ethical aspect of these innovations. It emphasises the way in which technological advances and their socio-legal frameworks are co-produced, shaping technology...... expectations, social identities, and legal institutions. It also considers how imagined and actual uses of forensic genetic technologies are entangled with assertions about social order, affirmations of common values and civil rights, and promises about security and justice. Our comments seek to encourage...... the participation of scientific actors in the development of anticipatory governance deliberations concerning the widening application of forensic genetics in an increasing number of criminal and civil jurisdictions....

  13. Innovation Processes and Entrepreneurial Culture for Radical Innovations

    Directory of Open Access Journals (Sweden)

    Ľubica Knošková

    2015-02-01

    Full Text Available To survive and prosper, the organizations need to embed the processes and mechanisms to discover major technology and consumer trends and respond to them through new growth areas. Based on profound literature review providing insight into organizational factors that affect firms’ ability to manage innovation this paper asks which innovation processes and entrepreneurial culture support radical innovations. The aim of the paper is to specify the company behaviour that leads to innovative outputs with high level of novelty in country specific context of Slovakia. We conducted two-stage empirical research in 2009 and 2014 mapping companies’ approach to innovation management during the last 10 years. After surveying 102 firms in the first stage and 287 firms in the second stage we derive success factors for radical innovations. The findings demonstrate growing importance of corporate strategic orientation, highly developed innovation processes and parallel mechanisms for radical innovation, ability to manage internally and externally open innovation and support entrepreneurial culture. This study makes unique contribution to the understanding of innovation processes, organizational factors, and their significance and dynamics. It should attract managerial attention to recognize the importance of innovation management factors for building firm’s innovation competency.

  14. Rethinking the Market - Technology Relationship for Innovation

    DEFF Research Database (Denmark)

    Howells, John

    with respect to the technology-market matching process that is fundamental to innovation. The validity of the approach is demonstrated through empirical examples. These examples also show the value of distinguishing between two types of market concept used by the innovating firm. These are the 'reference...

  15. User driven innovation in mobile technologies?

    DEFF Research Database (Denmark)

    Larsen, Casper Schultz; Koch, Christian

    2007-01-01

    Developing dedicated mobile technology systems for AEC demands the introduction of user driven innovation. A Danish research project collected international examples and user-experiences of mobile and handheld ICT in the building industry i.a. by reading off the functionality of the mobile...... technology systems relying on the concept of affordance. This paper examines how innovation processes mediate between user orientations and technology offers. There is a great potential for mobile handheld ICT-systems to support numerous work processes in the AEC-industry and this can be substantiated......-site processes. On the other hand generic technologies are also widely implemented in routine and day-today activities, making mobile technologies in construction a mix of user and technology driven innovations....

  16. Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 1, Industrial solid waste processing municipal waste reduction/recycling

    Energy Technology Data Exchange (ETDEWEB)

    Lee, V.E. [ed.; Watts, R.L.

    1993-04-01

    This two-volume proceedings summarizes the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  17. Technology Matters - When new technology reshape innovation

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...... the firm, which over time becomes a source of innovation. However, through adoption of this new technology firms engage in a mu-tual learning and forming process where the firm learn by using the new technol-ogy. When learning, the firm and the new technology is mutually formed as the firm tries to adopt...... learning. As the possibilities of the new hybrid tech-nology are recognised a new strategy based on the new hybrid technology is formed trying to exploit its advantages. The paper uses a number of case studies in firms implementing product configuration systems to substantiate these claims. It has been...

  18. DEPLOYMENT OF INNOVATIVE CHARACTERIZATION TECHNOLOGIES AND IMPLEMENTATION OF THE MARSSIM PROCESS AT RADIOLOGICALLY CONTAMINATED SITES.

    Energy Technology Data Exchange (ETDEWEB)

    KALB,P.D.; MILIAN,L.; LUCKETT,L.; WATTERS,D.; MILLER,K.M.; GOGOLAK,C.

    2001-05-01

    The success of this Accelerated Site Technology Deployment (ASTD) project is measured on several levels. First, the deployment of this innovative approach using in situ characterization, portable field laboratory measurements, and implementation of MARSSIM was successfully established for all three phases of D and D characterization, i.e., pre-job scoping, on-going disposition of waste, and final status surveys upon completion of the activity. Unlike traditional D and D projects, since the Brookhaven Graphite Research Reactor Decommissioning Project (BGRR-DP) is operating on an accelerated schedule, much of the work is being carried out simultaneously. Rather than complete a full characterization of the facility before D and D work begins, specific removal actions require characterization as the activity progresses. Thus, the need for rapid and cost-effective techniques for characterization is heightened. Secondly, since the approach used for this ASTD project was not thoroughly proven prior to deployment, a large effort was devoted to demonstrating technical comparability to project managers, regulators and stakeholders. During the initial phases, large numbers of replicate samples were taken and analyzed by conventional baseline techniques to ensure that BGRR-DP quality assurance standards were met. ASTD project staff prepared comparisons of data gathered using ISOCS and BetaScint with traditional laboratory methods and presented this information to BGRR-DP staff and regulators from EPA Region II, NYS Department of Environmental Conservation, and the Suffolk County Board of Health. As the results of comparability evaluations became available, approval for these methods was received and the techniques associated with in situ characterization, portable field laboratory measurements, and implementation of MARSSIM were gradually integrated into BGRR-DP procedures.

  19. DEPLOYMENT OF INNOVATIVE CHARACTERIZATION TECHNOLOGIES AND IMPLEMENTATION OF THE MARSSIM PROCESS AT RADIOLOGICALLY CONTAMINATED SITES.

    Energy Technology Data Exchange (ETDEWEB)

    KALB,P.D.; MILIAN,L.; LUCKETT,L.; WATTERS,D.; MILLER,K.M.; GOGOLAK,C.

    2001-05-01

    The success of this Accelerated Site Technology Deployment (ASTD) project is measured on several levels. First, the deployment of this innovative approach using in situ characterization, portable field laboratory measurements, and implementation of MARSSIM was successfully established for all three phases of D and D characterization, i.e., pre-job scoping, on-going disposition of waste, and final status surveys upon completion of the activity. Unlike traditional D and D projects, since the Brookhaven Graphite Research Reactor Decommissioning Project (BGRR-DP) is operating on an accelerated schedule, much of the work is being carried out simultaneously. Rather than complete a full characterization of the facility before D and D work begins, specific removal actions require characterization as the activity progresses. Thus, the need for rapid and cost-effective techniques for characterization is heightened. Secondly, since the approach used for this ASTD project was not thoroughly proven prior to deployment, a large effort was devoted to demonstrating technical comparability to project managers, regulators and stakeholders. During the initial phases, large numbers of replicate samples were taken and analyzed by conventional baseline techniques to ensure that BGRR-DP quality assurance standards were met. ASTD project staff prepared comparisons of data gathered using ISOCS and BetaScint with traditional laboratory methods and presented this information to BGRR-DP staff and regulators from EPA Region II, NYS Department of Environmental Conservation, and the Suffolk County Board of Health. As the results of comparability evaluations became available, approval for these methods was received and the techniques associated with in situ characterization, portable field laboratory measurements, and implementation of MARSSIM were gradually integrated into BGRR-DP procedures.

  20. Energy Saving Melting and Revert Reduction Technology: Innovative Semi-Solid Metal (SSM) Processing

    Energy Technology Data Exchange (ETDEWEB)

    Diran Apelian

    2012-08-15

    Semi-solid metal (SSM) processing has emerged as an attractive method for near-net-shape manufacturing due to the distinct advantages it holds over conventional near-net-shape forming technologies. These advantages include lower cycle time, increased die life, reduced porosity, reduced solidification shrinkage, improved mechanical properties, etc. SSM processing techniques can not only produce the complex dimensional details (e.g. thin-walled sections) associated with conventional high-pressure die castings, but also can produce high integrity castings currently attainable only with squeeze and low-pressure permanent mold casting processes. There are two primary semi-solid processing routes, (a) thixocasting and (b) rheocasting. In the thixocasting route, one starts from a non-dendritic solid precursor material that is specially prepared by a primary aluminum manufacturer, using continuous casting methods. Upon reheating this material into the mushy (a.k.a. "two-phase") zone, a thixotropic slurry is formed, which becomes the feed for the casting operation. In the rheocasting route (a.k.a. "slurry-on-demand" or "SoD"), one starts from the liquid state, and the thixotropic slurry is formed directly from the melt via careful thermal management of the system; the slurry is subsequently fed into the die cavity. Of these two routes, rheocasting is favored in that there is no premium added to the billet cost, and the scrap recycling issues are alleviated. The CRP (Trade Marked) is a process where the molten metal flows through a reactor prior to casting. The role of the reactor is to ensure that copious nucleation takes place and that the nuclei are well distributed throughout the system prior to entering the casting cavity. The CRP (Trade Marked) has been successfully applied in hyper-eutectic Al-Si alloys (i.e., 390 alloy) where two liquids of equal or different compositions and temperatures are mixed in the reactor and creating a SSM slurry. The process has been mostly

  1. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  2. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  3. Manufacturing Innovation and Technological Superiority

    Science.gov (United States)

    2016-09-01

    Defense AT&L: September-October 2016 2 From the Under Secretary of Defense for Acquisit ion, Technology, and Logist ics Manufacturing Innovation ...English advantages in mechanized textile manufacturing in the early 1800s drove the performance of the British economy, just as Carnegie’s steel...program to establish Manufacturing Innovation Institutes (MIIs) that would create incubators for advanced manufacturing technology in key

  4. Aerospace Technology Innovation. Volume 10

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor); Bennett, Evonne (Editor); Vendette, Joel (Editor); West, Kenyon (Editor)

    2002-01-01

    Whether finding new applications for existing NASA technologies or developing unique marketing strategies to demonstrate them, NASA's offices are committed to identifying unique partnering opportunities. Through their efforts NASA leverages resources through joint research and development, and gains new insight into the core areas relevant to all NASA field centers. One of the most satisfying aspects of my job comes when I learn of a mission-driven technology that can be spun-off to touch the lives of everyday people. NASA's New Partnerships in Medical Diagnostic Imaging is one such initiative. Not only does it promise to provide greater dividends for the country's investment in aerospace research, but also to enhance the American quality of life. This issue of Innovation highlights the new NASA-sponsored initiative in medical imaging. Early in 2001, NASA announced the launch of the New Partnerships in Medical Diagnostic Imaging initiative to promote the partnership and commercialization of NASA technologies in the medical imaging industry. NASA and the medical imaging industry share a number of crosscutting technologies in areas such as high-performance detectors and image-processing tools. Many of the opportunities for joint development and technology transfer to the medical imaging market also hold the promise for future spin back to NASA.

  5. 创新过程技术间断及其跨越的结构模型%Technology Disrupt in Innovation Process and Its Leapfrogging Structure Model

    Institute of Scientific and Technical Information of China (English)

    刘建国

    2013-01-01

    The technology innovation process is divided into “from product innovation to process innovation”,“from component innovation to structure innovation”,“from generic technology to core technology” three correlate processes in this paper.A four-layer technology innovation structure model was put forward based on the “innovation process-technology disrupt-across obstacles-leading ability”.It analyzes the related discontinuities of technology innovation,structure innovation,core technology,and its path obstacles.It also analyzes the leading ability across the technology gap from technology platform,product platform and development power.%把技术创新过程分为“从产品创新到工艺创新”、“从组件创新到结构创新”、“从共性技术到核心技术”三个相关联的过程,提出一个基于“创新过程一技术间断一跨越障碍一主导能力”的四层次技术创新结构模型,分析了与其相关联的工艺创新间断点、结构创新间断点、核心技术间断点的形成及其路径障碍,并从工艺平台能力、产品平台能力、开拓性动力能力等方面分析了跨越技术间断的主导能力.

  6. Water Innovation and Technology

    Science.gov (United States)

    Water technologies are a specific sector that EPA works to address through the water technology cluster, aging infrastructure research, green infrastructure, and major industry meetings such as WEFTEC.

  7. Group Innovation Ability of Agricultural Technological Innovation Strategic Alliance

    Institute of Scientific and Technical Information of China (English)

    Chishun; MA; Jintian; YU

    2013-01-01

    Agricultural technological innovation strategic alliance, as an important form of strategic alliance, has steadily strengthened the collaborative management among organizations and raised competitive power with the backing of improved group innovation ability. This article studies innovation ability from individual innovation ability to the group innovation ability. Firstly, basic connotation of group innovation ability is to be concluded through the comparison of individual and group innovation ability. Secondly, evaluation index system is to be established based on the influencing factors of the group innovation ability of agricultural technological innovation strategic alliance and evaluation is based on three dimensions, namely organization technological innovation ability, alliance collaborative innovation ability as well as innovation environment. Furthermore, basic methods for promoting the group innovation ability of alliance are to be proposed.

  8. The Roles and Identification of Innovators and Linkers in the Technology Transfer Process.

    Science.gov (United States)

    1977-09-01

    I u - 2 7 u - 0 u u + O ’ u + 2 0 WOOLLEY HCCI -IBERGER (1977) Figure 7 . The hy pothes i zed distribution of innovators based on...icers of the Civil Engine ering Corps. Monterey. California. Naval Postgraduate School. NPS ( 1973) . 12. Creighton . J. W .. J. A. Jolly. and S. A

  9. Innovation Technologies as a Factor of Advanced Development of the Education Process: Problems and Prospects

    Directory of Open Access Journals (Sweden)

    Nataliya I. Lopina

    2017-03-01

    Full Text Available The article reflects some significant features of the practical use of modern teaching methods. On the basis of the system and student-centered approaches to education at higher school it has been determined the pedagogical conditions for the implementation of innovations in the teaching medical Latin of the first-year students.

  10. Innovate or imitate? Behavioural technological change

    NARCIS (Netherlands)

    Hommes, C.; Zeppini, P.

    2013-01-01

    We propose a behavioural model of technological change with evolutionary switching between boundedly rational costly innovators and free imitators, and study the endogenous interplay of innovation decisions, market price dynamics and technological progress. Innovation and imitation are strategic sub

  11. Innovate or imitate? Behavioural technological change

    NARCIS (Netherlands)

    Hommes, C.; Zeppini, P.

    2014-01-01

    We propose a behavioural model of technological change with evolutionary switching between costly innovators and free imitators, and study the endogenous interplay of innovation decisions, market price dynamics and technological progress. Innovation and imitation are strategic substitutes and exhibi

  12. Innovation Processes and Closure

    DEFF Research Database (Denmark)

    Darsø, Lotte; Austin, Robert

    2009-01-01

    Artiklen beskriver, diskuterer og illustrerer en lang række forskellige innovationsprocesmodeller med fokus på hvordan (og hvornår) innovative teams håndterer at stoppe processen. Sommetider er der tale om forceret lukning fx pga deadlines eller andet, andre gange sker der en tydelig krystalliser......Artiklen beskriver, diskuterer og illustrerer en lang række forskellige innovationsprocesmodeller med fokus på hvordan (og hvornår) innovative teams håndterer at stoppe processen. Sommetider er der tale om forceret lukning fx pga deadlines eller andet, andre gange sker der en tydelig...... krystallisering af et koncept. Der peges også på nye typer af modeller, hvor udviklingsprocessen holdes åben, fordi produktet aldrig bliver "færdigt". Endelig sammenholdes innovationsprocessen med kunstneriske og kreative processer....

  13. Process innovation in the sugar industry : Chromatographic sugar separation using SMB technology

    NARCIS (Netherlands)

    Bussmann, P.; Vroon, R.; Timmer, J.; Boon, F.; Bruijn, J.M. de

    2007-01-01

    The chromatographic separation of sugar from raw juice was identified as a promising alternative for the current juice purification. Simulated moving bed technology (SMB) was chosen as the most suitable technology on the basis of the purification, limited degree of dilution and increased sugar

  14. Innovative technologies in business hotels

    Directory of Open Access Journals (Sweden)

    Анастасия Игоревна Сидоренко

    2015-10-01

    Full Text Available The article analyzes the state and prospects of development of the hotel industry sector in Ukraine, aimed at a business audience that is constantly increasing; the need for the development and implementation of innovative technologies in a business hotel, because in the long term they will provide improving the service levels, the occupancy rate of the hotel rooms and competitiveness. An expediency of introducing innovative wireless LED lighting system in the rooms of business hotels is proved

  15. Technological literacy and innovation education

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    2014-01-01

    , and a heavy digitization of the health care sector. These developments have actualized the fundamental question of how new technologies change and challenge the professions and their professional relationships? As one way to deal with this question, health education programmes have begun to focus...... on innovation education and educational activities fostering technological literacy. While focus on technological literacy has often (historically) taken a functionalist direction, and mainly been related to ICT and development of non- vocational curricula, more recent developments of approaches...

  16. Technological innovation as an unusual and non-biological evolutionary process. John Ziman (Ed.) Technological Innovation as an Evolutionary Process; Cambridge University Press, Cambridge, 2000, xvii + 379 pp., hardback, ISBN 0-521-62361-8

    Science.gov (United States)

    Vermaas, Pieter E.

    'Isn't technological innovation rather like biological evolution?' That is the question Gerry Martin asked John Ziman in 1993 and that is the question that has been discussed by scholars united in The Epistemology Group. With the present volume, edited by Ziman and containing 22 papers, these scholars present their results.

  17. APPLICATION OF INNOVATIVE TECHNOLOGIES IN AN EDUCATIONAL PROCESS IN HIGHER EDUCATIONAL ESTABLISHMENT

    Directory of Open Access Journals (Sweden)

    Natalia Yuryevna Yaduarova

    2015-01-01

    Full Text Available The article tells about the use of TRIZ Technology in teaching students of the Chechen State University. In order to be actual specialists in the modern world it is necessary to have non-standard thinking or creative approach to solution of problems presented by life. TRIZ-technology develops creative thinking and by unusual solutions of life problems helps students to master the disciplines and thus to become competitive professionals at today’s labor market. The article is addressed to all not indifferent teachers, who aim to improve the level of education in our country meeting the challenges of the time, teaching a new generation in their new, interesting, clear for them language of modern technologies.

  18. Group Innovation Ability of Agricultural Technological Innovation Strategic Alliance

    OpenAIRE

    Ma, Chishun; Yu, Jintian

    2013-01-01

    Agricultural technological innovation strategic alliance, as an important form of strategic alliance, has steadily strengthened the collaborative management among organizations and raised competitive power with the backing of improved group innovation ability. This article studies innovation ability from individual innovation ability to the group innovation ability. Firstly, basic connotation of group innovation ability is to be concluded through the comparison of individual and group innovat...

  19. Innovating Petroleum Processing Technology to Push on Development of China's Petroleum Refining Industry

    Institute of Scientific and Technical Information of China (English)

    Hou Fusheng

    2002-01-01

    @@ 1 Introduction The petroleum processing industry of China has been developing very fast. By the end of 1999 the total crude processing capacity of China reached 263 Mt/a, and 182 million tons of crude oils were processed in 1999. The annual average GDP growth in China is projected to be 7% during the "Tenth Five-Year Plan" period, while the corresponding growth in consumption of petroleum products is forecast to reach 4.7%.

  20. Investigating the Learning to Teach Process: Pedagogy, Innovation Adoption, Expertise Development, and Technology Integration

    OpenAIRE

    2013-01-01

    This dissertation reported three studies whose overarching purpose is to enhance our understanding about how teachers learn to teach by revealing the learning to teach process. Each of three studies revealed the learning to teach process from different perspectives. Guided by the Pedagogical Content Knowledge (PCK) framework, the first study revealed the learning process of elementary teachers' development of engineering PCK through engineering teaching practices. Approaching elementary teach...

  1. Strategy for design NIR calibration sets based on process spectrum and model space: An innovative approach for process analytical technology.

    Science.gov (United States)

    Cárdenas, V; Cordobés, M; Blanco, M; Alcalà, M

    2015-10-10

    The pharmaceutical industry is under stringent regulations on quality control of their products because is critical for both, productive process and consumer safety. According to the framework of "process analytical technology" (PAT), a complete understanding of the process and a stepwise monitoring of manufacturing are required. Near infrared spectroscopy (NIRS) combined with chemometrics have lately performed efficient, useful and robust for pharmaceutical analysis. One crucial step in developing effective NIRS-based methodologies is selecting an appropriate calibration set to construct models affording accurate predictions. In this work, we developed calibration models for a pharmaceutical formulation during its three manufacturing stages: blending, compaction and coating. A novel methodology is proposed for selecting the calibration set -"process spectrum"-, into which physical changes in the samples at each stage are algebraically incorporated. Also, we established a "model space" defined by Hotelling's T(2) and Q-residuals statistics for outlier identification - inside/outside the defined space - in order to select objectively the factors to be used in calibration set construction. The results obtained confirm the efficacy of the proposed methodology for stepwise pharmaceutical quality control, and the relevance of the study as a guideline for the implementation of this easy and fast methodology in the pharma industry.

  2. Innovation investment area: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

  3. Investigating the Learning to Teach Process: Pedagogy, Innovation Adoption, Expertise Development, and Technology Integration

    Science.gov (United States)

    Sun, Yan

    2013-01-01

    This dissertation reported three studies whose overarching purpose is to enhance our understanding about how teachers learn to teach by revealing the learning to teach process. Each of three studies revealed the learning to teach process from different perspectives. Guided by the Pedagogical Content Knowledge (PCK) framework, the first study…

  4. Retail innovation technologies

    Directory of Open Access Journals (Sweden)

    Vasile Dinu

    2015-05-01

    Full Text Available Commerce, as an important industry of any national economy, is a socially important complex of activities, which has to correspond to the general level of development and civilization of the community it serves. Considering this, the essential priorities commercial activity will turn to are represented by the increased power that consumers get through better informing, the assurance of a better connection between retail and innovation, more equitable and sustainable commercial relationships along the purchase chain, the improvement of retail services accessibility, the creation of a better work environment through the better correlation between employers’ needs and employers’ competences. Retail is permanently adapting to the changing market conditions, remaining a high competitive sector. Modern buyer is hurried, more mobile, better informed; more concerned about health, environment, comfort and aesthetics issues, more demanding in terms of quality and level of customization. Population migration, urbanization, and ageing, its absolute decrease, the average households size reduction, are all demographic trends to which retail must provide an appropriate answer. Retail businesses operating costs tend to increase, while buyers are warier under the impact of the global financial crisis, which will put additional pressure on profit margins.

  5. Innovative Technologies in Science Teaching

    Science.gov (United States)

    Guerra, Cecilia; Pombo, Lucia; Moreira, Antonio

    2011-01-01

    Technology plays a crucial role in pupils' and primary teachers' lives nowadays and its use can facilitate change towards an innovative school environment. The internet, for example, can act as a platform to foster science teaching and offers a variety of opportunities for effective science learning and engaging and motivating children. But…

  6. Governing Science, Technology and Innovation:

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing

    2007-01-01

    Abstract: As an object of public management, Science, Technology and Innovation (STI) is characterised by a high level of uncertainty and complexity. The paper argues that to cope with the phenomenon of STI as a coherent area of policy formulation and regulation, a balancing of rational-, reflexive...

  7. Innovations and Innovation Processes in Higher Education.

    Science.gov (United States)

    Berg, Barbro; Ostergren, Bertil

    Included in this report are seven comparative case studies of innovation processes in higher education in Sweden. The purpose of the study is to chart dysfunctions in the system in planning for change, and also to gain more knowledge of the organization by studying it when it has been "disturbed" through introduction of an innovative…

  8. The Role of Fe and Ni for S-process Nucleosynthesis and Innovative Nuclear Technologies

    CERN Document Server

    Giubrone, G; Perkowski, J; Andriamonje, S; Carrapico, C; Wallner, A; Vannini, G; Quesada, J M; Lederer, C; Tarrio, D; Berthier, B; Lozano, M; Krticka, M; Domingo-Pardo, C; Chiaveri, E; Jericha, E; Ferrari, A; Massimi, C; Avrigeanu, V; Martinez, T; Guerrero, C; Andrzejewski, J; Karadimos, D; Mendoza, E; Ganesan, S; Vlachoudis, V; Milazzo, P M; Cortes, G; Becares, V; Tain, J L; Variale, V; Quinones, J; Calvino, F; Kappeler, F; Gunsing, F; Gramegna, F; Colonna, N; Marrone, S; Lebbos, E; Paradela, C; Mastinu, P F; Vaz, P; Tassan-Got, L; Kadi, Y; Dillman, I; Cano-Ott, D; Brugger, M; Audouin, L; Fernandez-Ordonez, M; Sarmento, R; Becvar, F; Goncalves, I F; Martin-Fuertes, F; Cerutti, F; Pina, G; Mosconi, M; Tagliente, G; Duran, I; Berthoumieux, E; Praena, J; Ioannides, K; Weiss, C; Mirea, M; Gomez-Hornillos, M B; Vlastou, R; Calviani, M; Nolte, R; Mengoni, A; Gonzalez-Romero, E; Marganiec, J; Leeb, H; Heil, M; Meaze, M H; Pavlik, A; Belloni, F; Harrispopulos S

    2011-01-01

    The accurate measurement of neutron capture cross sections of all Fe and Ni isotopes is important for disentangling the contribution of the s-process and the r-process to the stellar nucleosynthesis of elements in the mass range 60 < A < 120. At the same time, Fe and Ni are important components of structural materials and improved neutron cross section data is relevant in the design of new nuclear systems. With the aim of obtaining improved capture data on all stable iron and nickel isotopes, a program of measurements has been launched at the CERN Neutron Time of Flight Facility n_TOF.

  9. On Market-Oriented Technological Innovation

    Institute of Scientific and Technical Information of China (English)

    CAO Li-he; WANG Jian-pei

    2003-01-01

    Technological innovations, the lifeline of enterprises, should originate from and endure the test of the market. Technological innovations are not only related to technology but more so to marketing. Hence, technological innovations should be market-oriented and relative marketing operations should be enhanced.

  10. Technology innovation and process integrations for sub-100nm gate patterning

    Institute of Scientific and Technical Information of China (English)

    Meihua Shen; Wilfred Pau; Nicolas Gani; Jianping Wen; Shashank Deshmukh; Thorsten Lill; Jian Zhang; Hanming Wu; Guqing Xing

    2004-01-01

    This paper presents a brief overview of the Applied Centura(R)DPS(R)system,configured with silicon etch DPS Ⅱ chamber, with emphasis on discussing tuning capability for CD uniformity control. It also presents the studies of etch process chemistry and film integration impact for an overall successful gate patterning development. Discussions will focus on resolutions to key issues, such as CD uniformity, line-edge roughness, and multilayer film etching integration.

  11. Upflow Sludge Blanket Filtration (USBF: An Innovative Technology in Activated Sludge Process

    Directory of Open Access Journals (Sweden)

    R Saeedi

    2010-06-01

    Full Text Available Background: A new biological domestic wastewater treatment process, which has been presented these days in activated sludge modification, is Upflow Sludge Blanket Filtration (USBF. This process is aerobic and acts by using a sludge blanket in the separator of sedimentation tank. All biological flocs and suspended solids, which are presented in the aeration basin, pas through this blanket. The performance of a single stage USBF process for treatment of domestic wastewater was studied in laboratory scale.Methods: The pilot of USBF has been made from fiberglass and the main electromechanical equipments consisted of an air com­pressor, a mixing device and two pumps for sludge return and wastewater injection. The wastewater samples used for the experiments were prepared synthetically to have qualitative characteristics similar to a typical domestic wastewater (COD= 277 mg/l, BOD5= 250 mg/l and TSS= 1 mg/l.Results: On the average, the treatment system was capable to remove 82.2% of the BOD5 and 85.7% of COD in 6 h hydraulic re­tention time (HRT. At 2 h HRT BOD and COD removal efficiencies dramatically reduced to 50% and 46.5%, respectively.Conclusion: Even by increasing the concentrations of pollutants to as high as 50%, the removal rates of all pollutants were re­mained similar to the HRT of 6 h.

  12. Understanding the Adoption Process of National Security Technology: An Integration of Diffusion of Innovations and Volitional Behavior Theories.

    Science.gov (United States)

    Iles, Irina A; Egnoto, Michael J; Fisher Liu, Brooke; Ackerman, Gary; Roberts, Holly; Smith, Daniel

    2017-03-01

    After the 9/11 terrorist attacks, the U.S. government initiated several national security technology adoption programs. The American public, however, has been skeptical about these initiatives and adoption of national security technologies has been mandated, rather than voluntary. We propose and test a voluntary behavioral intention formation model for the adoption of one type of new security technology: portable radiation detectors. Portable radiation detectors are an efficient way of detecting radiological and nuclear threats and could potentially prevent loss of life and damage to individuals' health. However, their functioning requires that a critical mass of individuals use them on a daily basis. We combine the explanatory advantages of diffusion of innovation with the predictive power of two volitional behavior frameworks: the theory of reasoned action and the health belief model. A large sample survey (N = 1,482) investigated the influence of factors identified in previous diffusion of innovation research on portable radiation detector adoption intention. Results indicated that nonfinancial incentives, as opposed to financial incentives, should be emphasized in persuasive communications aimed at fostering adoption. The research provides a new integration of diffusion of innovation elements with determinants of volitional behavior from persuasion literature, and offers recommendations on effective communication about new security technologies to motivate public adoption and enhance national safety. © 2017 Society for Risk Analysis.

  13. Innovative Technology Development Program. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program. The plan is part of the DOE`s program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE`s clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process.

  14. Assessment on Dairy Product Processing Enterprises' Science and Technology Innovation Ability%乳品加工企业科技创新能力评估研究

    Institute of Scientific and Technical Information of China (English)

    林丽; 张润清; 张岩峰; 李彦宁

    2012-01-01

    分析了乳品加工企业科技创新的基本概念、乳品加工科技创新类型和乳品加工企业创新面临的新特点以及影响乳品加工企业科技创新能力的因素.在此基础上,运用模糊综合评价方法建立了乳品加工企业科技创新能力综合评判体系,该模型将乳品加工企业的科技创新能力划分为4个等级,利用德尔菲法和数据统计得到评价体系中的数据,并对数据进行拟合运算,最后得出乳品加工企业科技创新能力的等级.在分析了乳品加工企业面临的内外环境之后,结合乳品加工企业科技创新能力影响因素,提出了提升乳品加工企业科技创新能力的对策与建议.%The basic concepts of scientific and technological innovation in dairy processing enterprises, type of dairy science and technology innovation,and new features of innovation in dairy processing were analyzed. Based on it, a comprehensive e-valuation system of science and technology innovation ability in dairy processing enterprises was established, using fuzzy comprehensive evaluation method. Dairy processing enterprises' technological innovation ability was divided into four levels in the model, using the Delphi method and the statistical evaluation system to get the data, and carried on the fitting operation to the data, and finally arrived at scientific and technological innovation level of the dairy processing enterprises. After the analysis of external environment dairy processing enterprises facing, combined with the effects factors, recommendations for improving the ability of technological innovation in dairy product processing enterprises were made.

  15. Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 2, Industrial liquid waste processing, industrial gaseous waste processing

    Energy Technology Data Exchange (ETDEWEB)

    Lee, V.E. [ed.; Watts, R.L.

    1993-04-01

    This two-volume proceedings summarize the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Individual reports are indexed separately.

  16. Cultivate technology convergence for product innovation.

    Science.gov (United States)

    Wilkinson, J Malcolm

    2006-04-01

    Technologies from diverse scientific disciplines are being combined to drive innovation in medical devices. How technology convergence and innovation could be further stimulated is explored here using developments in imaging and point-of-care devices as examples.

  17. Process monitoring with disposable chemical sensors fit in the framework of process analysis technology (PAT) for innovative pharmaceutical development and quality assurance.

    Science.gov (United States)

    Spichiger, Stefan; Spichiger-Keller, Ursula E

    2010-01-01

    The innovative principle of enzymatic sensors applied to monitor the feeding process in disposable bioreactors is described. Innovative is the type of enzyme immobilized within the 'paste' to monitor L-glutamate. Innovative is the application of the miniaturized disposable sensor developed at C-CIT AG for continuous monitoring. The sensor allows the amount of the digested nutrient to be estimated from the amperometric signal. Innovative is the wireless signal transduction between the sensor mounted to the bioreactor and the signal receiver. An example of a process control run is given and, also, the biocompatibility and the specifications of the biosensors. The comparison of results evaluated by different analytical methods is discussed.

  18. The Management of Innovation and Technology

    DEFF Research Database (Denmark)

    Howells, John

    of the reality of taking decisions on innovation. The chapters cover: - The social context for individual acts of creative insight - The development of the technology-market relationship - The management of R&D and technological standards - Technological competition - The role of institutions of finance...... in innovation - The reciprocal relationship between intellectual property law and technological innovation. - The role of technological skills and regimes of technological education in innovation. - An introduction to the role of the state in maintaining the innovative capacity of the private sector....

  19. Innovative technology summary report.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-05-09

    Traditional site characterization methods rely on preplanned sampling programs and off-site analysis of samples to determine the extent and level of hazardous waste contamination. This process is costly and time-consuming. Static work plans specify the numbers and locations of samples to be collected, as well as the analyses to be performed on collected samples. Sampling crews are mobilized, samples are collected, and the crews are demobilized before final results become available. Additional sampling programs are often required to resolve uncertainties raised by the initial sampling and analysis results. The drawbacks of a traditional approach to sampling program design and execution are high costs per sample, pressure to over sample while at the site, and inevitable surprises in the analytical results that require additional sampling to resolve. A key step in the characterization of hazardous wastes at U.S. Department of Energy (DOE) sites is determination of the extent of contamination. The proper number and placement of sampling locations is required to both minimize characterization costs and guarantee that contamination extent can be estimated with reasonable confidence. Because ''soft'' information (i.e., historical records, computer modeling results, past experience, etc.) for a site are usually just as important as ''hard'' laboratory results, the approach taken must include a quantitative way of accounting for both hard and soft site data. An alternative to traditional sampling programs is Adaptive Sampling and Analysis Programs (ASAPs). ASAPs rely on field analytical methods to generate sample results quickly enough to have an impact on the course of the sampling program. Rather than a static work plan, ASAPs are based on dynamic work plans that specify the logic for how sampling numbers, locations, and analyses will be determined as the program proceeds. To ensure that the sampling stays on track, ASAPs also rely

  20. Mastering Technologies in Design-Driven Innovation

    DEFF Research Database (Denmark)

    Dell'era, Claudio; Marchesi, Alessio; Verganti, Roberto

    2010-01-01

    and semantic dimensions of a product. Case studies of two leading Italian companies in the furniture industry--Kartell and Luceplan--illustrate two principal interpretations of the role of technology in radical design-driven innovation: technology as an enabler of new product meanings for the customer......Only a few companies have mastered the design-driven approach to innovation. This paper examines what it means to make design a central part of the business process, able to add value to products and create new markets. More specifically, it focuses on the interplay between the functional......, and the importance of supply networks that allow manufacturers to change product technologies quickly and experiment with new technologies....

  1. Technology Licensing and Firm Innovation

    DEFF Research Database (Denmark)

    Moreira, Solon

    that facilitate or constrain firms' ability to deal with licensed-in technologies have received little attention. This paper starts investigating in a longitudinal setting the effect of technology licensing on the number of patents produced by the licensee within the three years subsequent to the technology...... acquisition. The findings indicate that technology licensing is positively related to the number of inventions produced by the licensee in the years subsequent to the licensing deal. Subsequently, I investigate the moderating effect that organizational slack and myopia have on this main relationship....... The findings also suggest that high levels of Organizational Slack (available financial resources) strengthen the positive effect of licensing on innovation. However, higher levels of Organizational Myopia (the extent to which a firm draws on its own knowledge) can decrease the main effect of licensing....

  2. The Conceptual Framework for Business Process Innovation

    DEFF Research Database (Denmark)

    Møller, Charles

    This paper proposes a research program on Business Process Innovation: Towards Global Supply Chain Intelligence. Few words are more ubiquitous in business or society today than "innovation". This reflects that businesses are striving for ways to survive and thrive in an increasingly complex....... Organizations today are required not only to operate effective business processes but they also need to accommodate to changing business conditions at an increasing rate. Consequently the ability to develop and implement new processes driven by the Enterprise Information Systems is a central competence in most...... industries, and furthermore it is a critical practice for a global enterprise. The next practice in Global Supply Chain Management is Business Process Innovation. Business Process Innovation is the transformation of a global supply chain driven by a new advanced Enterprise Information Systems technology...

  3. Innovation, what innovation? : a comparison between product, process and organisational innovation

    NARCIS (Netherlands)

    Boer, Harry; During, Willem E.

    2001-01-01

    This article compares and contrasts three types of innovations, namely, product innovation, process innovation and organisational innovation. From similarities and differences between these three types, implications for the theory and practice of innovation management are inferred. Most of these imp

  4. Managing Innovation and Technology in Developing Countries

    CERN Document Server

    Ali, Murad; Khan, Pervez

    2009-01-01

    Innovation and technology management is an inevitable issue in the high end technological and innovative organizations. Today, most of the innovations are limited with developed countries like USA, Japan and Europe while developing countries are still behind in the field of innovation and management of technology. But it is also becoming a subject for rapid progress and development in developing countries. Innovation and technology environment in developing countries are by nature, problematic, characterized by poor business models, political instability and governance conditions, low education level and lack of world-class research universities, an underdeveloped and mediocre physical infrastructure, and lack of solid technology based on trained human resources. This paper provides a theoretical and conceptual framework analysis for managing innovation and technology in developing countries like India and China. We present the issues and challenges in innovation and technology management and come up with pro...

  5. 开放式技术创新范式下企业全面创新投入研究%Resource Allocation in the Technological Innovation Process for Open Innovations

    Institute of Scientific and Technical Information of China (English)

    陈劲; 吴波

    2011-01-01

    The current technological innovation studies are primarily built upon Schumpeter Rents' theory. Tidd, et al. (1997) presents a 5-generation-model to illustrate the evolution of technological innovation modes that emphasizes both the development of external networks and internal systems. Although these literatures use a more integrated structure to explain the inputs of innovation resource, a unified structure is not sufficient to locate resource allocation bottlenecks. It is important to identify them and present a more effective and efficient way to manage innovation resource inputs.This research focuses on identifying the resource allocation bottlenecks in the innovation process for manufacturers. The paper uses a list of common input items and adopts the stepwise regression method to investigate which one of them has the most significant compact on the innovation performance. We conduct a survey with 213 Chinese equipment manufacturers. We use the Oslo Manual as our guideline to set the innovation frequency as the performance indicator in different stages of product innovation, process innovation and platform innovation. First, we conduct a literature review on different activities in the innovation process, including R&D, manufacturing, and marketing. Our literature review leads us to the development of an input list for Chinese equipment manufacturers. We also discuss the stage-division method proposed by Utterback & Abernathy (U-A) model, and propose a 3-stage model. Second, we introduce our research methods, including variable measurement, sample selection, and stepwise regression method. Third, we analyze the data and report analysis results, including sample distribution, and the causal relationships between our identified input items and innovation performance. Analysis results indicate that internal R&D, engineering processing, cooperative R&D and experimental production have significant impacts on production innovation. In contrast, experimental

  6. Innovation Processes in Higher Education.

    Science.gov (United States)

    Berg, Barbro; Ostergren, Bertil

    1979-01-01

    Innovation processes in the Swedish Higher Education System are described and related to a general theory of innovation. Using the theories of Kurt Lewin, characteristics of higher education as a social system and factors which determine the nature of the forces towards a certain type of change are defined. (JMF)

  7. Evaluating innovation networks in emerging technologies

    NARCIS (Netherlands)

    Valk, T. van der; Chappin, M.M.H.; Gijsbers, G.W.

    2011-01-01

    Interorganisational innovation networks are increasingly important for innovation in emerging technology fields. The performance of such networks can have a large impact on the future development of emerging technologies. A useful framework for the evaluation of innovation networks however does not

  8. Innovation Process Design: A Change Management and Innovation Dimension Perspective

    Science.gov (United States)

    Peisl, Thomas; Reger, Veronika; Schmied, Juergen

    The authors propose an innovative approach to the management of innovation integrating business, process, and maturity dimensions. Core element of the concept is the adaptation of ISO/IEC 15504 to the innovation process including 14 innovation drivers. Two managerial models are applied to conceptualize and visualize the respective innovation strategies, the Balanced Scorecard and a Barriers in Change Processes Model. An illustrative case study shows a practical implementation process.

  9. The technological innovation case of the KAERI

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J. I. [Habat Univ., Daejeon (Korea, Republic of); Jang, S. K. [Sungkonghoe Univ., Seoul (Korea, Republic of); Hong, K. P. [Baekseok Univ., Chunan (Korea, Republic of); Lee, E. S. [National Fusion Research Institue, Daejeon (Korea, Republic of)

    2008-01-15

    The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge.

  10. Technology for Innovation in Radiation Oncology.

    Science.gov (United States)

    Chetty, Indrin J; Martel, Mary K; Jaffray, David A; Benedict, Stanley H; Hahn, Stephen M; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A; Mankoff, David; Marks, Lawrence B; Ollendorf, Daniel; Paganetti, Harald; Ross, Brian; Siochi, Ramon Alfredo C; Timmerman, Robert D; Wong, John W

    2015-11-01

    Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled "Technology for Innovation in Radiation Oncology," which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

  11. User Driven Innovation in the Building Process

    DEFF Research Database (Denmark)

    Christiansson, Per; Sørensen, Kristian Birch; Rødtness, Mette;

    2008-01-01

    to introduction of advanced information and communication technology (ICT). The paper focuses on creative changes of the building process powered by user driven innovation activities. An overview of existing user driven innovation methodologies is given as well experiences from the ongoing Virtual Innovation......During the late years there has been an ever-increasing focus on the possibilities to change the building process to raise quality on the final building products as well as the activities of actors involved in the building process. One reason for this interest is the new opportunities evolving due...... building design. A general methodological framework and meta ontology for Virtual Innovation in Construction is presented as well as findings from implementation of the method....

  12. A Review of the Literature on Process Innovation in Remanufacturing

    Directory of Open Access Journals (Sweden)

    Huriye Sabancı Özer

    2012-07-01

    Full Text Available The aim of this article is to present a concise review of the relationship between environmental sustainability, environmental innovation and remanufacturing. In the past, corporate environment was accounted as an environment determining the firm performance by economic, social, political and technological factors. However, lately, environmental factors are also included into the corporate environment. Recent research studies focus on the Environmental Management System as an extremely effective instrument for organizations; and concentrate on the Environmental Innovation as technological product and process innovation. Product innovation has been widely studied in the areas of new product development, product design for environment, and design for remanufacturing. The studies on remanufacturing show that it can be profitable and can create environmental benefits. However, the literature is insufficient on process innovation. Consequently, environmental innovation as technological product and process innovation results in a reduction of environmental impacts, and there is an emerging need for further studies on process innovation in remanufacturing.

  13. Work and technological innovation in organic agriculture.

    Science.gov (United States)

    Tereso, M J A; Abrahão, R F; Gemma, S F B; Montedo, U B; Menegon, N L; Guarneti, J E; Ribeiro, I A V

    2012-01-01

    Organic agriculture is a sustainable cultivation ecologically, economically and socially. Several researches in organic agriculture have been made from technical perspectives, economic traits or related to ecological aspects. There are practically no investigations into the nature of the technology used in organic agriculture, especially from an ergonomic perspective. From the activity analysis, this study aimed to map the technology used in the production of organic vegetables. Properties producing organic vegetables were selected representing the State of São Paulo. It was applied an instrument (questionnaire and semi-structured interview) with their managers and it was made visual records to identify adaptations, innovations and technological demands that simultaneously minimize the workload and the difficulties in performing the tasks and increase work productivity. For some of the technological innovations a digital scanner was used to generate a virtual solid model to facilitate its redesign and virtual prototyping. The main results show that organic farmers have little technology in product form. The main innovations that enable competitive advantage or allow higher labor productivity occur in the form of processes, organization and marketing.

  14. Opening up the Innovation Process

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2008-01-01

    . Seeking, developing, and protecting knowledge is a costly endeavour. Moreover, apart from being expensive, the process of turning new knowledge into useful and well-protected innovations often slows the speed of development and increases costs. In this chapter, alternative strategies for innovation......, in which sharing and co-operation play a critical part, are discussed. In particular, we address the involvement of users in opening up the innovation process which, in turn, offers participating actors some useful strategies for product development. Four archetypal strategies are identified and classified...

  15. Understanding energy technology developments from an innovation system perspective

    Energy Technology Data Exchange (ETDEWEB)

    Borup, M.; Nygaard Madsen, A. [Risoe National Lab., DTU, Systems Analysis Dept., Roskilde (Denmark); Gregersen, Birgitte [Aalborg Univ., Department of Business Studies (Denmark)

    2007-05-15

    With the increased market-orientation and privatisation of the energy area, the perspective of innovation is becoming more and more relevant for understanding the dynamics of change and technology development in the area. A better understanding of the systemic and complex processes of innovation is needed. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark. The study focuses on five technology areas: bio fuels, hydrogen technology, wind energy, solar cells and energy-efficient end-use technologies. The main result of the analysis is that the technology areas are quite diverse in a number of innovation-relevant issues like actor set-up, institutional structure, maturity, and connections between market and non-market aspects. The paper constitutes background for discussing the framework conditions for transition to sustainable energy technologies and strengths and weaknesses of the innovation systems. (au)

  16. Innovative technologies for soil cleanup

    Energy Technology Data Exchange (ETDEWEB)

    Yow, J.L. Jr.

    1992-09-01

    These notes provide a broad overview of current developments in innovative technologies for soil cleanup. In this context, soil cleanup technologies include site remediation methods that deal primarily with the vadose zone and with relatively shallow, near-surface contamination of soil or rock materials. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in soil cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the sits-specific technical challenges presented by each sold contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After cataloging a representative selection of these technologies, one of the new technologies, Dynamic Underground Stripping, is discussed in more detail to highlight a promising soil cleanup technology that is now being field tested.

  17. Barriers to using consumer science information in food technology innovations: An exploratory study using Delphi methodology

    NARCIS (Netherlands)

    Raley, Marian E.; Ragona, Maddalena; Sijtsema, S.J.; Fischer, A.R.H.; Frewer, L.J.

    2016-01-01

    Food technology innovation has the potential to deliver many benets to society, although some technologies have been problematic in terms of public acceptance. In promoting the commercial success of innovative technological processes and resultant products it will be important to

  18. Evaluating Colombian SMEs’ technological innovation: Part 1: conceptual basis, evaluation methodology and characterisation of innovative companies

    OpenAIRE

    Óscar Fernando Castellanos Domínguez; Luz Marina Torres; Aida Mayerly Fúquene Montañez

    2010-01-01

    Innovative processes currently constitute one of the most important alternatives for increasing organisations’ levels of competitiveness and productivity. The Colombian state (being conscious of this) has generated mechanisms aimed at encouraging technological and innovative development activities in SMEs, as was the case with the Colombian Prize for Entrepreneurial Technological Innovation for SME (Innova) 2006. The experience acquired through the technical evaluation of such prize was a ...

  19. Innovative process rational choice grounding in organization

    Directory of Open Access Journals (Sweden)

    S.M. Illiashenko

    2015-06-01

    Full Text Available The aim of the article. The aim of the article is to investigate and scientifically to ground recommendations concerning choice of the rational structure and innovative process content, depending on innovative development potential in the organization and innovation radicalization degree, which provides to coordinate interconnection between SRCCW and innovations marketing at its stages for various innovative business types. The results of the analysis. The generalized scheme of organization innovative activity is investigated. It characterizes interconnections between innovative process, innovative business and innovative strategies types. The peculiarities of the works conduct concerning innovative process distinguished types are confirmed by scheme: works essence, type (types of the innovative business, innovative strategy (strategies, which is realized. Recommendations concerning works conduct reasonability of the several stages in the innovative process for organizations, which have innovative business combined type, are suggested. Essence and content of SRRCW works and innovations marketing works are confirmed at the innovative and life cycle stages of the new product. Table of decisions is developed to choose innovative process variants, which are reasonably to realize by concrete organization, depending on subsystems constituents state of its innovative development potential and innovative product radicalization degree. The enlarged block-scheme of the algorithm to choose rational structure in the innovative process within one or every innovative projects, realized by organization, is investigated. The recommendations concerning estimation of the innovative processes possible simultaneous conduct with various or similar variants of the innovative process structures by formal procedures are developed. Conclusions and directions of further researches. Author’s studies together allow to increase validity and decrease risk to choose

  20. Process intensification: a balance between product and process innovation

    NARCIS (Netherlands)

    Graaff, M.P. de; Swinkels, P.

    2013-01-01

    Martijn de Graaff of TNO and Pieter Swinkels of TU Delft discuss the challenges of implementing process intensification in new product and process innovation. The Delft Product & Process Design Institute at Delft University of Technology in the Netherlands (TU Delft) has seen over 100 case studies o

  1. 75 FR 22553 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2010-04-29

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program Advisory Board, National Institute of Standards and Technology... Technology Innovation Program (TIP) Advisory Board is composed of ten members appointed by the Director...

  2. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    OpenAIRE

    Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

    2016-01-01

    We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

  3. Downstream Processing Technologies/Capturing and Final Purification : Opportunities for Innovation, Change, and Improvement. A Review of Downstream Processing Developments in Protein Purification.

    Science.gov (United States)

    Singh, Nripen; Herzer, Sibylle

    2017-08-10

    Increased pressure on upstream processes to maximize productivity has been crowned with great success, although at the cost of shifting the bottleneck to purification. As drivers were economical, focus is on now on debottlenecking downstream processes as the main drivers of high manufacturing cost. Devising a holistically efficient and economical process remains a key challenge. Traditional and emerging protein purification strategies with particular emphasis on methodologies implemented for the production of recombinant proteins of biopharmaceutical importance are reviewed. The breadth of innovation is addressed, as well as the challenges the industry faces today, with an eye to remaining impartial, fair, and balanced. In addition, the scope encompasses both chromatographic and non-chromatographic separations directed at the purification of proteins, with a strong emphasis on antibodies. Complete solutions such as integrated USP/DSP strategies (i.e., continuous processing) are discussed as well as gains in data quantity and quality arising from automation and high-throughput screening (HTS). Best practices and advantages through design of experiments (DOE) to access a complex design space such as multi-modal chromatography are reviewed with an outlook on potential future trends. A discussion of single-use technology, its impact and opportunities for further growth, and the exciting developments in modeling and simulation of DSP rounds out the overview. Lastly, emerging trends such as 3D printing and nanotechnology are covered. Graphical Abstract Workflow of high-throughput screening, design of experiments, and high-throughput analytics to understand design space and design space boundaries quickly. (Reproduced with permission from Gregory Barker, Process Development, Bristol-Myers Squibb).

  4. Evaluating Colombian SMEs’ technological innovation. Part 2: problems and challenges in innovation

    Directory of Open Access Journals (Sweden)

    Óscar Fernando Castellanos Domínguez

    2010-04-01

    Full Text Available As innovation is an extremely important aspect of economic progress, then new technologies and improving exist-ing ones must be evaluated for establishing the state of innovative culture and the ability to develop technology. The Colombian Innova award for Entrepreneurial Technological Innovation for SMEs was created in 2004, aimed at motivating technological and innovative development in this type of company. It also represents an important state initiative for promoting entrepreneurial innovation, providing a valuable source of information for establishing mechanisms for producing innovation in companies and gauging the current state of Colombian SMEs regarding innovation. This article outlines the structure of the award value chain, following-up and analysing the award’s results, understanding how it is awarded and identifying the actors involved in it. Analysing the award value chain led to identifying the lack of coordination between the National Innovation System (NIS and companies and establishing participants and award-winners’ geographical and sector distribution (contrasts being found between cities such as Bogotá, Medellín and Cali. The characteristics of processes leading to promoting innovation in participating companies (in most cases developing their innovative products or processes in completely organisationally endog-enous contexts were thus identified. These results (providing valuable information for strengthening the award also provided important input for strengthening strategies for promoting innovation in Colombian SMEs

  5. RELATIONSHIP MARKETING IN THE INNOVATION PROCESSES

    Directory of Open Access Journals (Sweden)

    Rodica Boier

    2014-01-01

    Full Text Available Inspired from the context of business-to-business markets, relationship marketing in the context of innovation have been expanded more and more to the consumer markets as well. The paper starts with a review of several most relevant studies on relationship marketing-innovation topic, from the first references to the current complex approaches. The effective stakeholder involvement in the value creation provides a more fertile ground for further successful innovations. All of the variables generating the success of a relationship marketing approach – trust, commitment, communication, seller’s customer orientation and empathy, experience and satisfaction a.s.o. – are also involved, with specific particularities, in the management of the innovation and new product development processes. The paper also outline the different perspectives to understand the relationship marketing-innovation approaches, coming from the product type, its business-to-business or business-to-consumer settings, the specific industry, the actual stage of the market evolution – emerging or mature –, the level of technological novelty as dimension of technological uncertainty, the position/ status and role of stakeholders as part in the relationships, the state of the new product development process in which the interactions occurs or special issues like sustainable innovation, for profit and not-for-profit areas etc.

  6. Healthcare technology innovation adoption electronic health records and other emerging health information technology innovations

    CERN Document Server

    Daim, Tugrul U; Basoglu, Nuri; Kök, Orhun M; Hogaboam, Liliya

    2016-01-01

    This book aims to study the factors affecting the adoption and diffusion of Health Information Technology (HIT) innovation. It analyzes the adoption processes of various tools and applications, particularly Electronic Health Records (EHR), highlighting the impact on various sectors of the healthcare system, such as physicians, administration,  and patient care, while also identifying the various pitfalls and gaps in the literature. With the various challenges currently facing the United States healthcare system, the study, adoption and diffusion of healthcare technology innovation, particularly HIT, is imperative to achieving national goals. This book is organized into three sections. Section one reviews theories and applications for the diffusion of Health Care Technologies. Section two evaluates EHR technology, including the barriers and enables in adoption and alternative technologies. Finally, section three examines the factors impacting the adoption of EHR systems. This book will be a key source for stu...

  7. The Management of Innovation and Technology

    DEFF Research Database (Denmark)

    Howells, John

    in innovation - The reciprocal relationship between intellectual property law and technological innovation. - The role of technological skills and regimes of technological education in innovation. - An introduction to the role of the state in maintaining the innovative capacity of the private sector.......This book analyses a range of social contexts in which human decisions shape technology in the market economy. It comprises a critical review of both a select research literature and in-depth historical studies. Material is drawn from many social science disciplines to inform the reader...... of the reality of taking decisions on innovation. The chapters cover: - The social context for individual acts of creative insight - The development of the technology-market relationship - The management of R&D and technological standards - Technological competition - The role of institutions of finance...

  8. Business Process Innovation using the Process Innovation Laboratory

    DEFF Research Database (Denmark)

    Møller, Charles

    for practical applications has not been identified. The aim of this paper is to establish a conceptual framework for business process innovation in the supply chain based on advanced enterprise systems. The main approach to business process innovation in this context is to create a new methodology for exploring......Most organizations today are required not only to establish effective business processes but they are required to accommodate for changing business conditions at an increasing rate. Many business processes extend beyond the boundary of the enterprise into the supply chain and the information...... infrastructure therefore is critical. Today nearly every business relies on their Enterprise System (ES) for process integration and the future generations of enterprise systems will increasingly be driven by business process models. Consequently process modeling and improvement will become vital for business...

  9. Technology Innovation Mode of Agricultural Leading Enterprise——Based on the Virtual Organization Mode

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Based on the definition of technology innovation of agricultural leading enterprises by domestic and foreign experts and scholars,technology innovation of agricultural enterprises is a process of new market increment,which uses new knowledge,technology,process and production mode,produces new products,offers new services and realizes commercialization. Characteristics of agricultural technology innovation are introduced,such as obvious regionality,relatively high risk,long-term periodicity and public attribute. Predicament for technology innovation of leading enterprises is analyzed,such as technical constraints,financial constraints and personnel constraints. Technological Innovation Mode can be classified into three modes of independent innovation,imitative innovation and cooperative innovation by the method of technology innovation. Among them,since there are some defects in the technology innovation process,independent innovation and imitative innovation are generally not used for the innovation of agricultural enterprises. Cooperative Innovation Mode can rely on foreign aid,can realize complementary advantages and achievement sharing,and can be widely applied in the agricultural innovation enterprise. Virtual organization in cooperation innovation mode is described,which makes up for technology,capital and human resources barriers in the process of agricultural enterprise innovation. Therefore,this mode is popular among the agricultural innovation enterprise.

  10. Technology Audit: Assessment of Innovative Portfolio

    Directory of Open Access Journals (Sweden)

    Kurushina Viktoria

    2016-01-01

    Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

  11. Enabling technologies: Supporting the development and use of innovative, energy-efficient, and environmentally friendly products and processes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    This pamphlet describes the Office of Industrial Technologies cooperative efforts to address industry needs for advanced materials, sensors and controls, process energy and energy efficiency. US industry needs enabling materials that are stronger and lighter, with resistance to high-temperature fatigue and improved resistance to corrosion and wear. New industrial materials such as intermetallic alloys and advanced ceramics have the potential to meet the challenges of the Industries of the Future. The manufacturing industries obtain over 85% of their energy from the on-site combustion of fuels. Enhancements to burners, boilers, and process heating systems can lower energy costs, reduce emissions, enhance fuel options, and increase safety and reliability. Robust, integrated measurement devices linked to intelligent control systems will enable US industry to use resources more efficiently and improve product quality. Through constant process monitoring and adjustment of parameters, these systems can reduce energy use and labor, minimize waste and pollution, and boost productivity. The Enabling Technologies Program is designed to address the cross-cutting needs of the Office of Industrial Technologies (OIT). OIT partners with industry to promote the development and use of energy-efficient, pollution-preventing technologies. The Nation`s environment benefits from greater use of these technologies, and industries benefit from cost savings, improved productivity, and increased competitiveness.

  12. 76 FR 70970 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-11-16

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program (TIP) Advisory Board will hold a meeting via teleconference on... Innovation Program Acting Deputy Director, National Institute of Standards and Technology, 100 Bureau...

  13. 76 FR 22673 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-04-22

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY... notice in the Federal Register announcing an open meeting for the Technology Innovation Program Advisory... rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology Innovation Program (TIP)...

  14. 企业产品——工艺组合技术创新模式探析%Analysis on Portfolio Model of Enterprise Product - Process Technological Innovation

    Institute of Scientific and Technical Information of China (English)

    毛维青; 陈劲; 郑文山

    2012-01-01

    In researches, product innovation and process innovation have always been considered separately. However, in reality, to obtain an everlasting market competitive advantage, an enterprise must make product innovation and process in-novation coordinated and matched. On the basis of analyzing the functions of product innovation and process innovation, we propose a view of innovation portfolio constituted by product innovation and process innovation. Then, through the analysis of four typical innovation portfolio models, we conclude that technological innovation capability must be a precondition for enterprises to choose the model of enterprise innovation portfolio.%传统研究中,产品创新与工艺创新之间一般是单独加以考虑.而实际上,企业的产品创新和工艺创新只有有效地协调匹配,才能取得持久的市场竞争优势.本文在分析产品创新与工艺创新作用的基础上,提出产品创新与工艺创新的组合创新.通过对四种典型组合创新模式的比较分析,认为企业组合创新模式的选择,必须以企业的技术创新能力为前提.

  15. Bringing to Market Technological Innovation: What Distinguishes Success from Failure

    OpenAIRE

    Federico Frattini; Alfredo De Massis; Vittorio Chiesa; Lucio Cassia; Giovanna Campopiano

    2012-01-01

    Commercialization is a critical step in technological innovation. Nevertheless, many scholars believe that it is often the least well-managed activity of the whole innovation process. The launch stage seems to be particularly critical in high-technology markets because of the volatility, interconnectedness and the proliferation of new technologies they experience. However, academic and practitioners' literature has not, so far, developed a clear understanding of the factors that distinguish a...

  16. GENERAL ENVIRONMENTAL CORPORATION; CURE ELECTROCOAGULATION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The CURE electrocoagulation technology was demonstrated under the Superfund Innovative Technology Evaluation (SITE) program at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS), where water from the solar evaporation ponds (SEPs) was contaminat...

  17. Technology and Innovation in Adult Learning

    Science.gov (United States)

    King, Kathy P.

    2017-01-01

    "Technology and Innovation in Adult Learning" introduces educators and students to the intersection of adult learning and the growing technological revolution. Written by an internationally recognized expert in the field, this book explores the theory, research, and practice driving innovation in both adult learning and learning…

  18. Management of Innovative Projects through Agile Technology

    Directory of Open Access Journals (Sweden)

    Radu Bucea-Manea-Tonis

    2014-09-01

    Full Text Available Because of the globalization and the evolution of internet and technologies, nowadays the innovation is associated with open collaboration conducted by a legal framework. The paper analyses the methods that allow a better management for innovative projects and focuses on agile projects within a technological network.

  19. Science, Technology and Innovation in Uganda

    Science.gov (United States)

    Brar, Sukhdeep; Farley, Sara E.; Hawkins, Robert; Wagner, Caroline S.

    2010-01-01

    Science, Technology and Innovation in Uganda is part of the World Bank Studies series. These papers are published to communicate the results of the Bank's ongoing research and to stimulate public discussion. This study presents a unique methodology to view science, technology and innovation (STI) in developing countries. The study provides a set…

  20. Innovation process and innovativeness of facility management organizations

    NARCIS (Netherlands)

    Mudrak, T.; Wagenberg, van A.F.; Wubben, E.F.M.

    2005-01-01

    Purpose - The innovation patterns and processes in facility management (FM) organizations are crucial for the development of FM as a discipline, but they are not yet fully explored and understood. This paper aims to clarify FM innovation from the perspective of innovation processes and the

  1. Innovation process and innovativeness of facility management organizations

    NARCIS (Netherlands)

    Mudrak, T.; Wagenberg, van A.F.; Wubben, E.F.M.

    2005-01-01

    Purpose - The innovation patterns and processes in facility management (FM) organizations are crucial for the development of FM as a discipline, but they are not yet fully explored and understood. This paper aims to clarify FM innovation from the perspective of innovation processes and the innovativ

  2. The development strategy of financial and innovative technologies

    Directory of Open Access Journals (Sweden)

    R.V. Lavrov

    2013-09-01

    Full Text Available The aim of the article. The aim of the article is to define and to estimate the forming of expediency of the development strategy of financial and innovative technologies in the context of modern economic space realities.The results of the analysis. The growing importance of the financial sector in the contemporary economic space, as well as rapid changes in it, generates a need for financial innovative technologies. Development strategy of financial and innovative technologies is always associated with the current state of the financial system, its existent technical, technological and financial base. Therefore, the strategy of financial and innovative technologies will be considered the system of long-term goals and means of achieving them, implemented in the financial activity. Financial innovative technologies strategy includes two aspects: 1 management of the introduction of technical and technological innovations; 2the process of constant changes in the financial sector according to the environment change. Thus, theessence of the development strategy of financial innovative technologies is to target business entities (including banks to application new and more efficient technologies, services and organizational structures. In other words, to put the problem of profitability, flexibility and adaptability increasing in the financial market.The development expediency of the financial and innovative technologies is determined by such criteria: concordance with the amount of capital that can be directed to the financial activity; efficiency or concordance of the results and the real costs of achieving them; distinctness in terms of achieving the aim; the optimal combination of expected achievement the necessary profitability and possible risks and uncertainty in the future period; concordance of planned financial technologies with general economic conditions of the environment. Choosing the basic strategy of financial innovative technologies

  3. Impact of technological innovation on a nursing home performance and on the medication-use process safety.

    Science.gov (United States)

    Baril, Chantal; Gascon, Viviane; Brouillette, Christel

    2014-03-01

    Despite the fact that since 1985 the government of Québec increased by 5.75 % on average the amount of money spent on healthcare per year, little improvement was noted. It is obvious that an optimal use of resources is essential to reduce waiting times and provide safer and faster services to patients. The use of new technology can contribute to improve the healthcare system efficiency. Our study aims to assess the impact of a medication distribution technology on 1) the performance of a health and social services center's pharmacy, 2) the performance of one care unit in a nursing home and on 3) the medication-use process safety. To measure performance we were inspired by the Lean approach. The results show that medication distribution technology is considered as an effective way to significantly detect medication errors, to allow nurses to focus more on patients and pharmacy to react more rapidly to changes in patient medications.

  4. Innovating beyond Technology: Studies on how management innovation, co-creation and business model innovation contribute to firms' (innovation) performance

    OpenAIRE

    Heij, Kevin

    2015-01-01

    textabstractInnovation is generally considered to be a cornerstone of organizational survival in many of today’s dynamic and competitive markets. This dissertation goes beyond the dominant focus on technological innovation in innovation studies by examining how and under which conditions several major non-technological types of innovation contribute to firm performance. The five studies presented in this dissertation reveal more about how management innovation, co-creation with customers and ...

  5. Opening up the Innovation Process

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2008-01-01

    , in which sharing and co-operation play a critical part, are discussed. In particular, we address the involvement of users in opening up the innovation process which, in turn, offers participating actors some useful strategies for product development. Four archetypal strategies are identified and classified......An organization's ability to create, retrieve, and use knowledge to innovate is a critical strategic asset. Until recently, most textbooks on business and product development argued that managers should keep their new ideas to themselves and protect knowledge from getting into competitors' hands...

  6. Healthcare technology co-operatives: Innovative about innovation.

    Science.gov (United States)

    Heron, Nicola M; Tindale, Wendy B

    2014-01-01

    The paper provides an introduction to the National Institute for Health Research Devices for Dignity Healthcare Technology Co-operative. Embedded within the NHS, Devices for Dignity identifies areas of unmet clinical need and translates these into research and development projects to develop new medical technologies. It addresses the needs of people living with long-term conditions, helping them to live more dignified and independent lives. Through partnerships with patients, universities, the NHS and industry, Devices for Dignity has developed an innovation methodology for successful medical technology innovation.

  7. Research and Innovation Processes revisited

    DEFF Research Database (Denmark)

    Timmermans, Job; Yaghmaei, Emad; Carsten Stahl, Bernd

    2017-01-01

    Purpose: The purpose of this paper is to explore how relationships between different actors are being shaped to allow industry to come to acceptable and desirable uses of research and innovation (R&I) that address societal challenges. Design/methodology/approach: Building on existing notions....... By describing overlaps in objects, subjects and other aspects across relationships, the theoretical model proved adequate in untangling and displaying interrelatedness of responsibilities. Furthermore, the analysis surfaced characteristics of responsible research and innovation (RRI) that are already in place...... in the R&I processes of two innovative companies, such as anticipation, foresight and stakeholder engagement. Not all aspects of responsibility outlined in the theoretical model could be extracted from the interview data for every responsibility relationship, pointing to the need for further research...

  8. The power of design product innovation in sustainable energy technologies

    CERN Document Server

    Reinders, Angele H; Brezet, Han

    2012-01-01

    The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

  9. Health of students in modern environmental conditions and innovative technologies.

    Directory of Open Access Journals (Sweden)

    Losik T. N.

    2011-08-01

    Full Text Available It is shown the row of the phenomena which negatively influence not only on a health man but also on his professional capacity: detraining of an organism through the lack of motive activity, tense emotional state of man in the process of his everyday work, negative influencing of environment and innovative technologies. The analysis of publications which examine influence of environment and innovative technologies on the state of health of man is presented. The system of organism is certain, feel like negative influence of environment and innovative technologies. It is set that an environment is indissolubly related to the man, which is the active object of nature.

  10. 75 FR 62369 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2010-10-08

    ... Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board... address is rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology Innovation Program...

  11. Overcoming resistance to change in business innovation processes

    OpenAIRE

    Jose Vicente Berna-Martinez; Francisco Macia-Perez

    2012-01-01

    This paper summarizes the experience gained in dealing with resistance to change appeared in the companies when they develop innovative processes related to the adoption of new technologies, tools, equipment, infrastructure and methodologies. Technological innovation is rapidly absorbed by society on a personal level. But at the enterprise level, resistance to innovation can occur at any hierarchical level of the company and may appear with different intensity. Depending on the type of enterp...

  12. Innovation as a nonlinear process, the scientometric perspective, and the specification of an 'innovation opportunities explorer'

    NARCIS (Netherlands)

    Leydesdorff, L.; Rotolo, D.; de Nooy, W.

    2013-01-01

    The process of innovation follows nonlinear patterns across the domains of science, technology, and the economy. Novel bibliometric mapping techniques can be used to investigate and represent distinctive, but complementary perspectives on the innovation process (e.g. ‘demand’ and ‘supply’) as well

  13. Innovation in surgical technology and techniques: Challenges and ethical issues.

    Science.gov (United States)

    Geiger, James D; Hirschl, Ronald B

    2015-06-01

    The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation.

  14. INNOVATION TRENDS ON INFORMATION AND COMMUNICATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Radu CURETEANU

    2010-12-01

    Full Text Available The importance of innovation was long underestimated in service activities. In contrast to the radical innovations vital to growth in manufacturing sectors, innovations in services and tourism were secondary and capital-scarce, and for this reason they were excluded from the scope of government interest and action. It is interesting to note that the discourse changed with the emergence of new information and communication technologies, which have been especially influential in the realm of tourism.

  15. Information Technology, Environmental Innovations and Complementarity Strategies

    OpenAIRE

    2013-01-01

    The paper investigates the extent to which the adoption of Information and Communication Technology (ICT) by firms affects the likelihood of adopting environmental innovations (EI). We also test empirically whether various types of ICT adoption and other innovation practices (R&D, techno-organizational change) are complementary inputs with respect to the introduction of specific environmental innovations. The analysis is based on two different data sources, which offer various views on ICT an...

  16. Robotics: Breakthrough Technologies, Innovation, Intellectual Property

    OpenAIRE

    Andrew Keisner; Julio Raffo; Sacha Wunsch-Vincent

    2016-01-01

    Robotics technology and the increasing sophistication of artifi cial intelligence are breakthrough innovations with signifi cant growth prospects. Th ey have the potential to disrupt existing socio-economic facets of everyday life. Yet few studies have analysed the development of robotics innovation. Th is paper closes this gap by analysing current developments in innovation in robotics; how it is diff used, and what role is played by intellectual property (IP). Th e paper argues that robotic...

  17. 76 FR 18166 - Technology Innovation Program Advisory Board

    Science.gov (United States)

    2011-04-01

    ... National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY.... SUMMARY: The Technology Innovation Program Advisory Board, National Institute of Standards and Technology.... Cesaro's e-mail address is rene.cesaro@nist.gov . SUPPLEMENTARY INFORMATION: The Technology...

  18. MINERGY CORPORATION GLASS FURNACE TECHNOLOGY EVALUATION: INNOVATION TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report presents performance and economic data for a U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program demonstration of the Minergy Corporation (Minergy) Glass Furnace Technology (GFT). The demonstration evaluated the techno...

  19. Innovative mechanical technologies for agricultural and forest quality productions

    Directory of Open Access Journals (Sweden)

    Raffaele Cavalli

    2008-04-01

    Full Text Available The quality of agricultural and forest products are related to the productive process in which innovative mechanical technologies are used. The innovation should be considered at product, process and enterprise level, the last one being considered as changes into enterprise organization, included services diversification. In the field of machinery used for agricultural products, from soil tillage to harvesting and post-harvesting processes the innovation dealing with products, but also with energy use, environmental protection, work safety has been important due to the mechanical technology output. In the forest sector working systems in which operations are carried out in totally mechanized way, with small turn to semi-mechanized operations, are growing. They are innovations that should change the relationship with young generation which could consider the mechanical technologies attractive for a working activity until now evaluated not much desiderable.

  20. Innovative mechanical technologies for agricultural and forest quality productions

    Directory of Open Access Journals (Sweden)

    Raffaele Cavalli

    2011-02-01

    Full Text Available The quality of agricultural and forest products are related to the productive process in which innovative mechanical technologies are used. The innovation should be considered at product, process and enterprise level, the last one being considered as changes into enterprise organization, included services diversification. In the field of machinery used for agricultural products, from soil tillage to harvesting and post-harvesting processes the innovation dealing with products, but also with energy use, environmental protection, work safety has been important due to the mechanical technology output. In the forest sector working systems in which operations are carried out in totally mechanized way, with small turn to semi-mechanized operations, are growing. They are innovations that should change the relationship with young generation which could consider the mechanical technologies attractive for a working activity until now evaluated not much desiderable.

  1. Innovation Dialectics: An Extended Process Perspective on Innovation in Services

    DEFF Research Database (Denmark)

    Nardelli, Giulia

    2017-01-01

    Services are characterised by the involvement of customers and other interest groups in the innovation process. The aim of this study is to understand how and why, in the service context, tensions and potential conflicts between heterogeneous interest groups unfold during processes of innovation....... is a process model, which proposes innovation dialectics as one of the driving mechanisms of innovation in services.......Services are characterised by the involvement of customers and other interest groups in the innovation process. The aim of this study is to understand how and why, in the service context, tensions and potential conflicts between heterogeneous interest groups unfold during processes of innovation....... The empirical field in which the investigation was set is facility services, a type of business-to-business support services. The findings were extracted from a longitudinal, in-depth case study of a Danish, multi-national organisation over 13 years, complemented with an explorative study in the Danish facility...

  2. Innovation as a Nonlinear Process and the Scientometric Perspective

    NARCIS (Netherlands)

    Leydesdorff, L.; Rotolo, D.; de Nooy, W.; Archambault, E.; Gingras, Y.; Larivière, V.

    2012-01-01

    The process of innovation follows non-linear patterns across the domains of science, technology, and the economy. Novel bibliometric mapping techniques can be used to investigate and represent distinctive, but complementary perspectives on the innovation process (e.g., "demand" and "supply") as well

  3. Evaluating Colombian SMEs’ technological innovation: Part 1: conceptual basis, evaluation methodology and characterisation of innovative companies

    Directory of Open Access Journals (Sweden)

    Óscar Fernando Castellanos Domínguez

    2010-04-01

    Full Text Available Innovative processes currently constitute one of the most important alternatives for increasing organisations’ levels of competitiveness and productivity. The Colombian state (being conscious of this has generated mechanisms aimed at encouraging technological and innovative development activities in SMEs, as was the case with the Colombian Prize for Entrepreneurial Technological Innovation for SME (Innova 2006. The experience acquired through the technical evaluation of such prize was a valuable element for identifying Colombian MSMSC innovative characteristics and trends. The present article seeks to establish the current state of innovation in SMEs from expe- rience gained when evaluating and awarding the Innova prize; a frame of reference concerning innovation and design, the methodology used for evaluating the prize and some general statistics regarding the results obtained in 2006 are thus presented. A future publication will give the factors influencing innovation taking geographical regions, sectors and impact as reference. Such results revealed innovative initiatives in strategic sectors such as computer science and services, the leadership of cities such as Bogota and MedellIn and the need for producing clear guidelines for incorporating process and product design into being part of the innovative process.

  4. LOGISTICS AS A PART OF INNOVATION PROCESS

    Directory of Open Access Journals (Sweden)

    Erika Loučanová

    2016-03-01

    Full Text Available The paper deals with the importance of logistics in innovation process. The issue is focused on management of different logistic processes building on the innovation and on innovation process. However, logistics is an essential part of this process. The results describe logistics chain within innovation process for the satisfaction of customers´ demand and fulfilment of customers’ requests on the innovation. This approach involves “7S of logistics” which means: “create proper innovation, in the proper quality, for the right place and in the right time, as well as, with the proper price and package”.

  5. Water Technology Innovation: Ten Market Opportunities

    Science.gov (United States)

    The Water Technology Innovation Blueprint offers an overview of market opportunities that include conserving and recovering energy, recovering nutrients, improving water infrastructure, reducing costs for water monitoring, and improving water quality.

  6. Emerging technologies, innovative teachers and moral cohesion

    CSIR Research Space (South Africa)

    Batchelor, J

    2012-05-01

    Full Text Available using Straussian Grounded Theory Method to articulate a substantive theory which aims to better our understanding of knowledge creation when innovative teachers use emerging technology to enhance their teaching and learning practice. The resultant...

  7. Technological Innovation Management and its Role in Performance of Organizations

    Directory of Open Access Journals (Sweden)

    Laura-Diana Radu

    2012-10-01

    Full Text Available This paper aims to identify the main benefits of technological innovation in organizations and how it should be managed to ensure economic efficiency. The current level of social and economic evolution was possible only through active involvement of individuals and organizations in the innovative process. Adoption of appropriate policies and strategies at institutional, national and international level has significant impact on both the innovation process and innovation results. At company level, involvement in an innovative process depends on the financial and human resources and on the availability and interest of management and employees. The main motivating factor in adoption of technological innovation is, most often, obtaining financial benefits. This reflects itself either as a direct increase in profits, or by obtaining competitive advantage which leads, in the long run, to profits increase and achieving a favorable position on the market. Should not be neglected other motivating factors of innovation, such as compliance with environmental standards, ensuring a secure position on the market with opportunities for further expansion, reducing the cost of raw materials and / or production process, improving company image, attitude and achievements of partners in the field (competitors, suppliers, customers etc. Managers need to carefully analyze these factors and decide the manner and degree of involvement in an innovative process.

  8. The Kyoto Mechanisms and Technological Innovation

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    Climate change response, including implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. One of the important agreements in several declarations, including the Kyoto protocol, has been to promote and coordinate...... the collaboration between the countries in the necessary technological development. The paper encourage that the Kyoto mechanisms will be used for acceleration of the necessary technical innovation in Denmark....

  9. Problems forming innovative-technological image of russian regions

    Directory of Open Access Journals (Sweden)

    Irina Markovna Golova

    2012-06-01

    Full Text Available In this paper, actual problems of innovative-technological image as a key element of the mechanism of the healing sources of socioeconomic development of the Russian regionsare considered. The author gives an assessment of the level of differentiation of subjects of the Russian Federation on the potential for innovative development. Trends in spatial transformations of thescientific and technical and innovation capacities of the country are analyzedand reasons of low innovational activity of Russian enterprises are disclosed. Basic conditions for the success of actions to create an attractive image of innovative-technological territory are formulated. Special attention is paid to the position of regions as participants in the innovational processes, creating preconditions for creativity, harmonization of spatial priorities of innovation, technological and socio-economic development, support for the development of new high-tech industries, improvement of inter-budgetary relations. There are proved priority areas of state policy to reduce barriers to the realization of an innovative paradigm for development of Russian society and effective inclusion of local communities in the implementation of innovative changes.

  10. User Driven Innovation in the Building Process

    Institute of Scientific and Technical Information of China (English)

    Per Christiansson; Kistian Birch Sorensen; Mette Rodtness; Mette Abrahamsen; Lars Ostenfeld Riemnann; Morten Alsdorf

    2008-01-01

    During the late years there has been an ever-increasing focus on the possibilities to change the building process to raise quality on the final building products as well as the activities of actors involved in the building process. One reason for this interest is the new opportunities evolving due to introduction of ad-vanced information and communication technology (ICT). The paper focuses on creative changes of the building process powered by user driven innovation activities. An overview of existing user driven innovation methodologies is given as well experiences from the ongoing Virtual Innovation in Construction (VIC) project.One important driving force for change is the opportunity for users to develop and articulate real needs con-cerning for example different functionalities of a building and its parts, but also on artifacts supporting the ac-tual needs capture and requirements formulation during building design. A general methodological frame-work and meta ontology for Virtual Innovation in Construction is presented as well as findings from imple-mentation of the method.

  11. Innovative and Alternative Technology Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  12. Cultivating Technological Innovation in the Mind

    Directory of Open Access Journals (Sweden)

    PROF ANYATA BENEDICT U.(Ph.D

    2015-11-01

    Full Text Available Cultivating innovation in the mind is imperative to successfully move technology to the next level. Technology is growing rapidly in developed countries and has almost reached its peak. Developing countries and continents like Africa on the other hand are now seen as a breeding ground to explore in technological innovation. Researchers and entrepreneurs are shifting base to Africa where they can achieve maximum profit resulting from under development of the continent. Reefs, city and web are used to explain the best way to cultivate innovation. The city and web are such engines of new innovation because both environments are powerfully suited for the creation, diffusion and adoption of good ideas. The seven keys of cultivating innovation include tropical humidity, illiteracy, poor power surge of electronic use for research, good concept of the liquid networks, slow hunches, serendipity, acceptance of error in cultivating innovation, Exaptation, coffee breaks, application of programming interface and the use of quadrant as a tool. These keys are recommended to be put to use by every individual who has the mindset of driving technological innovation to the next level.

  13. Factors affecting multifunctional teams in innovation processes

    OpenAIRE

    Shen, Xin

    2002-01-01

    Structuring the innovation process and managing multifunctional teams is a basic prerequisite successful innovation. A well-structured process gives the possibility to implement effective multifunctional teamwork. Meanwhile, multifunctional teamwork helps to optimise and accomplish the innovation process. Organizational support is necessary to achieve effective teamwork. Designing or changing the organizational structures for multifunctional collaboration is an important issue. Changing the s...

  14. EFFECT OF CORPORATE INNOVATION ABILITY ON THE CHOICE BETWEEN PRODUCT INNOVATION AND PROCESS INNOVATION

    OpenAIRE

    Zeng Wu; Tian Zhilong

    2010-01-01

    With the method of duopoly game theory, the effect of firms’ innovation ability on the choice between product and process innovation is studied. The concept of cost coefficient of product innovation is introduced, and the criterion equation for the innovation type is derived. The following conclusions are made: the more the product innovation ability, the more the possibility for the firms to carry out the product innovation in both the Bertrand and the Cournot competitions. Wi...

  15. Managing risks in business model innovation processes

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2010-01-01

    industrial companies shows that both companies are experiencing high levels of uncertainty and complexity during their innovation processes and are, consequently, struggling to find new processes for handling the risks involved. Based on the two companies’ experiences, various testable propositions are put......) innovation is a risky enterprise, many companies are still choosing not to apply any risk management in the BM innovation process. The objective of this paper is to develop a better understanding of how risks are handled in the practice of BM innovation. An analysis of the BM innovation experiences of two...... forward, which link success and failure to the way companies appreciate and handle the risks involved in BM innovation....

  16. Innovative process rational choice grounding in organization

    OpenAIRE

    S.M. Illiashenko

    2015-01-01

    The aim of the article. The aim of the article is to investigate and scientifically to ground recommendations concerning choice of the rational structure and innovative process content, depending on innovative development potential in the organization and innovation radicalization degree, which provides to coordinate interconnection between SRCCW and innovations marketing at its stages for various innovative business types. The results of the analysis. The generalized scheme of organizati...

  17. Innovating beyond Technology : Studies on how management innovation, co-creation and business model innovation contribute to firms' (innovation) performance

    NARCIS (Netherlands)

    C.V. Heij (Kevin)

    2015-01-01

    textabstractInnovation is generally considered to be a cornerstone of organizational survival in many of today’s dynamic and competitive markets. This dissertation goes beyond the dominant focus on technological innovation in innovation studies by examining how and under which conditions several

  18. Innovating beyond Technology : Studies on how management innovation, co-creation and business model innovation contribute to firms' (innovation) performance

    NARCIS (Netherlands)

    C.V. Heij (Kevin)

    2015-01-01

    textabstractInnovation is generally considered to be a cornerstone of organizational survival in many of today’s dynamic and competitive markets. This dissertation goes beyond the dominant focus on technological innovation in innovation studies by examining how and under which conditions several maj

  19. Innovative Technologies And Modern Facilities In Beekeeping

    Science.gov (United States)

    Gaga, V. A.; Esaulov, V. N.

    2016-08-01

    This article discusses the features of the application of innovative technologies in beekeeping. The authors, based on years of personal experience in beekeeping and learning experience of the best apiaries in Russia and abroad, summarized materials on the topic and offered advanced modern technology in beekeeping to apply, which was successfully tested in other apiaries.

  20. Tales of Technology Innovation Gone Wrong

    Science.gov (United States)

    Mallery, Mary

    2008-01-01

    People do not want to talk about failure, and technological innovations that do not work out are especially difficult for librarians to discuss. Technological failures are expensive in terms of money and time lost, and they are often minimized by library directors in their annual reports in favor of reporting more positive outcomes. Today's…

  1. Designing Corporate Databases to Support Technology Innovation

    Science.gov (United States)

    Gultz, Michael Jarett

    2012-01-01

    Based on a review of the existing literature on database design, this study proposed a unified database model to support corporate technology innovation. This study assessed potential support for the model based on the opinions of 200 technology industry executives, including Chief Information Officers, Chief Knowledge Officers and Chief Learning…

  2. The Kyoto mechanisms and technological innovation

    DEFF Research Database (Denmark)

    Lund, Henrik

    2006-01-01

    Climate change response, including the implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. Based on the Danish case, this paper evaluates the type of technological change necessary. During a period of 30 years, Denmark...... managed to stabilize primary energy supply, and CO2 emissions decreased by 10%, during a period of 20 years. However, after the introduction of the Kyoto Mechanisms, Denmark has changed its strategy. Instead of continuing the domestic CO2 emission controls, Denmark plans to buy CO2 reductions in other...... countries. Consequently, the innovative technological development has changed. This paper evaluates the character of such change and makes preliminary recommendations for policies to encourage the use of the Kyoto Mechanisms as an acceleration of the necessary technological innovation....

  3. Vaccine process technology.

    Science.gov (United States)

    Josefsberg, Jessica O; Buckland, Barry

    2012-06-01

    The evolution of vaccines (e.g., live attenuated, recombinant) and vaccine production methods (e.g., in ovo, cell culture) are intimately tied to each other. As vaccine technology has advanced, the methods to produce the vaccine have advanced and new vaccine opportunities have been created. These technologies will continue to evolve as we strive for safer and more immunogenic vaccines and as our understanding of biology improves. The evolution of vaccine process technology has occurred in parallel to the remarkable growth in the development of therapeutic proteins as products; therefore, recent vaccine innovations can leverage the progress made in the broader biotechnology industry. Numerous important legacy vaccines are still in use today despite their traditional manufacturing processes, with further development focusing on improving stability (e.g., novel excipients) and updating formulation (e.g., combination vaccines) and delivery methods (e.g., skin patches). Modern vaccine development is currently exploiting a wide array of novel technologies to create safer and more efficacious vaccines including: viral vectors produced in animal cells, virus-like particles produced in yeast or insect cells, polysaccharide conjugation to carrier proteins, DNA plasmids produced in E. coli, and therapeutic cancer vaccines created by in vitro activation of patient leukocytes. Purification advances (e.g., membrane adsorption, precipitation) are increasing efficiency, while innovative analytical methods (e.g., microsphere-based multiplex assays, RNA microarrays) are improving process understanding. Novel adjuvants such as monophosphoryl lipid A, which acts on antigen presenting cell toll-like receptors, are expanding the previously conservative list of widely accepted vaccine adjuvants. As in other areas of biotechnology, process characterization by sophisticated analysis is critical not only to improve yields, but also to determine the final product quality. From a regulatory

  4. Imagining value, imagining users: academic technology transfer for health innovation.

    Science.gov (United States)

    Miller, Fiona Alice; Sanders, Carrie B; Lehoux, Pascale

    2009-04-01

    Governments have invested heavily in the clinical and economic promise of health innovation and express increasing concern with the efficacy and efficiency of the health innovation system. In considering strategies for 'better' health innovation, policy makers and researchers have taken a particular interest in the work of universities and related public research organizations: How do these organizations identify and transfer promising innovations to market, and do these efforts make best use of public sector investments? We conducted an ethnographic study of technology transfer offices (TTOs) in Ontario and British Columbia, Canada, to consider the place of health and health system imperatives in judgments of value in early-stage health innovation. Our analysis suggests that the valuation process is poorly specified as a set of task-specific judgments. Instead, we argue that technology transfer professionals are active participants in the construction of the innovation and assign value by 'imagining' the end product in its 'context of use'. Oriented as they are to the commercialization of health technology, TTOs understand users primarily as market players. The immediate users of TTOs' efforts are commercial partners (i.e., licensees, investors) who are capable of translating current discoveries into future commodities. The ultimate end users - patients, clinicians, health systems - are the future consumers of the products to be sold. Attention to these proximate and more distal users in the valuation process is a complex and constitutive feature of the work of health technology transfer. At the same time, judgements about individual technologies are made in relation to a broader imperative through which TTOs seek to imagine and construct sustainable innovation systems. Judgments of value are rendered sensible in relation to the logic of valuation for systems of innovation that, in turn, configure users of health innovation in systemic ways.

  5. Art technologies as possible propulsars in technological innovation

    DEFF Research Database (Denmark)

    Jørgensen, Lars Botin

    2003-01-01

    kind. This discussion, of general character, constitutes the initial part of this paper. Then it briefly looks into the final terms of the papertitle and try to relate to the diffuse and discussed technological innovation. Both aspects – art and technology and technological innovation – will be dealt...... with from a historical/hermeneutic and social constructivist point of view, as the paper moves from a general principal level to a more specific, exemplary level, where three different art technologies are presented as possible propulsars in technological innovation.......Art and technology has, as the German philosopher Martin Heidegger points out, the same etymological root. A thorough investigation of the relationship between art and technology will show how this same root has manifested itself in different times and spaces bringing results of the most variegated...

  6. Frugal innovation process: Comparing between grassroots and elite contexts

    DEFF Research Database (Denmark)

    Hossain, Mokter; Levänen, Jarkko; Lindeman, Sara

    2017-01-01

    processes. Second, we show how individuals have very different understandings of frugal innovations as well as capacities and resources needed for the development of frugal innovations. Two prominent frugal innovation cases are used in this study. One innovation was developed by individuals from the USA......The objective of this paper is to understand the processes of the development of frugal innovation with an entrepreneurial spirit. The contributions of this study are twofold. First, we explore, compare, and contrast two very different contexts - grassroots and elite - of frugal innovation...... and another developed by an individual from the Gujarat, India. Using effectuation theory we find that there are some distinct differences between two categories regarding finance, access to science and technology, the motivation of innovators, options they have, actions they take, etc....

  7. INTRODUCTION OF INNOVATIVE TECHNOLOGIES IN EDUCATIONAL PROCESS AS CONDITION IMPROVING THE QUALITY OF EDUCATION OF CHILDREN WITH SEVERE SPEECH DISORDERS

    Directory of Open Access Journals (Sweden)

    E. N. Azletskaya

    2016-01-01

    Full Text Available The aim of the article is to describe the experience of kindergarten specialists in language development of preschool age children through the organization of children's and parents' productive activities. The article  substantiates  the  relevance  of  the  develo pment  and  implementation of the innovative  project "Psycho-pedagogical support for parents of children with severe speech disorders, in condition of art studio." Innovative project devoted to the actual direction  of  pre-school  pedagogy   psychological and educational support for parents in term s of preschool organizations. It is established that the activ ities of children's and parents' studio art allows you to organize an effective psychological and pedago gical support to parents with children with severe speech disorders; It creates condition s for improving   their   psychological   and  pedagogical   comp etence, activating parental involvement in the educ ational activities of pre-school organizations as participants in  the  educational  relationship.  Based  on the analysis of innovation found that the joint parent-child hand-productive work not only contributes to  the  development  of  fine  motor  skills  of  hands, which in turn has a positive effect on the development of a child's speech and further solves a number of problems: bringing up children love and respect for the traditions of people, way of life; forms moral qualities to establish positive interpersonal relatio nships, favorable psychological climate in the group; It creates conditions for the creative expression of children; optimizes the parent-child relationship.

  8. Campus Technology Innovators Awards 2011: Technology All-Stars

    Science.gov (United States)

    Lloyd, Meg; Raths, David

    2011-01-01

    Out of a total of 393 entries for the 2011 Campus Technology Innovators award, 10 winners rose to the top in six categories: (1) Leadership, Governance, and Policy; (2) Teaching and Learning; (3) Student Systems and Services; (4) Administrative Systems; (5) IT Infrastructure and Systems; and (6) Education Futurists. These innovative IT leaders…

  9. Achievements of Theoretical Research on Chinese Technological Innovation

    Directory of Open Access Journals (Sweden)

    Wang Hanxi

    2017-01-01

    Full Text Available Using the CNKI database as the sample source, we investigated the makeup of current research results on Chinese technological innovation, and found that the study of Chinese technological innovation consists of nine directions - underlying principles of innovation behavior, concepts of innovation cognition, methods of innovation, behavior of innovation subjects, structure of innovation mediators, innovation capacity, public service system of innovation, policy support system of innovation, and cultural environment of innovation, as well as several issues of innovation, including its behavior mechanism, operational mechanism, work mechanism, modes of implementation, modes of mathematical representation, modes of physical representation, modes of behavioral representation, modes of performance representation, modes of function realization, modes of structure realization, modes of workflow realization, modes of carrier realization, etc. Such a scattered makeup requires us to formulate the system of Chinese technological innovation achievements from the perspective of philosophy of science. This will be an important mission in the study of Chinese technological innovation.

  10. Aerospace Technology Innovation. Volume 9

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor)

    2001-01-01

    Commercializing technology is a daunting task. Of every 11 new product ideas, only one will successfully make it to the marketplace. Fully 46% of new product investment becomes sunk in cost. Yet, a few good companies consistently attain an 80% technology commercialization success rate and have lead the way in establishing best practices. The NASA Incubator program consists of nine incubators, each residing near a NASA research center. The purpose of the incubators is to use the best practices is to use the best practices of technology commercialization to help early stage businesses successfully launch new products that incorporate NASA technology.

  11. Bringing to Market Technological Innovation: What Distinguishes Success from Failure

    Directory of Open Access Journals (Sweden)

    Federico Frattini

    2012-09-01

    Full Text Available Commercialization is a critical step in technological innovation. Nevertheless, many scholars believe that it is often the least well-managed activity of the whole innovation process. The launch stage seems to be particularly critical in high-technology markets because of the volatility, interconnectedness and the proliferation of new technologies they experience. However, academic and practitioners’ literature has not, so far, developed a clear understanding of the factors that distinguish an effective commercialization from an unsuccessful one, especially in high-technology environments. This paper discusses the results of a research project that aimed to understand the ingredients for success in the commercialization of a technological innovation. The first stage of the research consisted of a comparative historical analysis of 18 innovations, which were commercialized in consumer high-tech markets in the last 30 years. The analysis advocates that an effective commercialization comprises three sub-strategies: Early adoption strategy, Adoption network configuration strategy and Mainstream adoption strategy, with each one characterized by a coherent set of commercialization dimensions. The relative importance of each sub-strategy in determining the innovation commercial success depends on the type of innovation that is commercialized, be it radical or incremental and discontinuous or continuous.

  12. Innovation, Diffusion, and Regulation in Energy Technologies

    Science.gov (United States)

    Fetter, Theodore Robert

    The innovation and diffusion of new technologies is one of the central concerns of economics. New inventions or technological combinations do not spring fully formed into the world; as firms encounter and learn about new technologies they experiment, refine, and learn about them, improving productivity (and sometimes earning economic rents). Understanding the processes by which firms learn, and how these processes interact with regulations, is fundamental to understanding the emergence of new technologies, their contribution to growth, and the interaction of innovation and regulation. This dissertation addresses how firms learn and respond to regulations in the context of emerging technologies. Within this framework, I address several questions. When production inputs are socially controversial, do firms respond to disclosure laws by voluntarily constraining their inputs? Do these public disclosure laws facilitate knowledge transmission across firms, and if so, what are the implications for public welfare - for instance, do the gains from trade outweigh any effects of reduced incentives for innovation? I study these questions in the context of hydraulic fracturing, though the results offer insight for more general settings. Panning out to a much broader view, I also explore how energy-related technologies - in both generation and consumption - diffuse across national boundaries over time, and whether innovation and diffusion of energy-efficient technologies has led to more or less energy-efficient economic growth. In my first paper, I contribute to improved understanding of the conditions in which information-based regulations, which are increasingly common in multiple policy domains, decrease externalities such as environmental pollution. Specifically, I test whether information disclosure regulations applied to hydraulic fracturing chemicals caused firms to decrease their use of toxic inputs. Prior to these mandatory disclosure laws, some operators voluntarily

  13. Study on Risk of Enterprise' Technology Innovation Based on ISM

    Science.gov (United States)

    Li, Hongyan

    The risk in the process of enterprise' technology innovation is concluted five subsystems: environmental risk, market risk, enterprise capacity risk, project risk and project management risk, 16 risk factors under each subsystem are identified. A Interpretative Structural Modeling(ISM) of of risk factors is established, the relationship and influence levels of them is confirmed, the purpose is to help enterprise assessing risks and taking countermeasure to minimize the potential loss and increase the innovation income.

  14. Between tradition and technological innovation: challenges to lime Heritage conservation

    Directory of Open Access Journals (Sweden)

    Marluci Menezes

    2016-01-01

    Full Text Available The aim is to discuss the relationship between traditional and scientific technological knowledge as innovative and fundamental to heritage conservation. It is argued that this innovation does not necessarily come from scientific knowledge, but potentially from a wise articulation between these two types of knowledge. This discussion starts from an already long process of reflection on lime heritage conservation, as developed in LNEC from research projects.

  15. Between tradition and technological innovation: challenges to lime Heritage conservation

    Directory of Open Access Journals (Sweden)

    Marluci Menezes

    2016-01-01

    Full Text Available The aim is to discuss the relationship between traditional and scientific technological knowledge as innovative and fundamental to heritage conservation. It is argued that this innovation does not necessarily come from scientific knowledge, but potentially from a wise articulation between these two types of knowledge. This discussion starts from an already long process of reflection on lime heritage conservation, as developed in LNEC from research projects.

  16. Entrepreneurs and Their Innovation Behavior in Science and Technology Innovation Process--Enterprises as the Main Body of Technical Innovation System%科技创新中的企业家及其创新行为——兼论企业为主体的技术创新体系

    Institute of Scientific and Technical Information of China (English)

    洪银兴

    2012-01-01

    After the transformation from technical innovation to science and technology innovation, enterprises have become not only the main body of adopting new technologies, but also participated positively to the innovation system which combines production, teaching and research, thus becoming main sources of new high technologies. The premise is that managers act as entrepreneurs and technological entrepreneurs as well. Technological entrepreneurs are supposed to possess enterpriser's qualities and technological qualities. Under the background of co-operation and innovation by production, teaching and research, entrepreneurs play the leading role in the process that companies transfer the new scientific discoveries to new technologies. This process reflects the co-operation between scientists and entrepreneurs. Technological entrepreneurs need to guide these two sides simultaneously. Also, compatible system and mechanism are required for the development of technological entrepreneurs. Cultivating technological entrepreneur team according to the growth nature of technological entrepreneurs is the key factor to the construction of our country's innovation system.%在技术创新上升为科技创新后,企业不只是成为采用新技术的主体,还会主动参与到产学研合作创新的体系中.成为孵化高新技术的一个主体。其前提是企业经营者不仅成为企业家。更是成为科技企业家。科技企业家既具有企业家素质。又具备科技素养。在产学研合作创新背景下,企业进入科学新发现孵化为新技术阶段.体现科学家和企业家的合作,在这个过程中,起主导作用的仍然是企业家。在科技创新的背景下,技术创新不仅以市场为导向.还需要以新的科学发现为导向。科技企业家对这两个方面都要进行导向。科技企业家的成长需要适合的体制机制.按照科技企业家成长的生态培育科技企业家队伍是国家创新体系建设的关键。

  17. Effects of RFID Technology on the Logistics Innovation

    OpenAIRE

    金, 双鴿; Shuangge, JIN

    2010-01-01

    An advanced automatic identification technology based on the Radio Frequency Identification (RFID) technology has significant value for inventory systems. RFID tag is a microchip combined with an antenna in a compact package and is called also IC tag. Other benefits of using RFID include the reduction of labor costs, the simplification of business processes, and the reduction of inventory inaccuracies. This paper aims to analyse the effects of RFID technology on the logistics innovation.

  18. Policies for the Energy Technology Innovation System (ETIS)

    NARCIS (Netherlands)

    Grubler, A.; Aguayo, F.; Gallagher, K.; Hekkert, M.P.; Jiang, K.; Mytelka, L.; Neij, L.; Nemet, G.; Wilson, C.

    2012-01-01

    Innovation and technological change are integral to the energy system transformations described in the Global Energy Assessment (GEA) pathways. Energy technology innovations range from incremental improvements to radical breakthroughs and from technologies and infrastructure to social institutions a

  19. Policies for the Energy Technology Innovation System (ETIS)

    NARCIS (Netherlands)

    Grubler, A.; Aguayo, F.; Gallagher, K.; Hekkert, M.P.; Jiang, K.; Mytelka, L.; Neij, L.; Nemet, G.; Wilson, C.

    2012-01-01

    Innovation and technological change are integral to the energy system transformations described in the Global Energy Assessment (GEA) pathways. Energy technology innovations range from incremental improvements to radical breakthroughs and from technologies and infrastructure to social institutions a

  20. Policies for the Energy Technology Innovation System (ETIS)

    NARCIS (Netherlands)

    Grubler, A.; Aguayo, F.; Gallagher, K.; Hekkert, M.P.; Jiang, K.; Mytelka, L.; Neij, L.; Nemet, G.; Wilson, C.

    2012-01-01

    Innovation and technological change are integral to the energy system transformations described in the Global Energy Assessment (GEA) pathways. Energy technology innovations range from incremental improvements to radical breakthroughs and from technologies and infrastructure to social institutions

  1. Technological Innovation – A Route Towards Sustainability

    Directory of Open Access Journals (Sweden)

    Gráinne Kavanagh

    2012-06-01

    Full Text Available The sustainability of small and medium-sized enterprises (SMEs  is constantly challenged on today’s dynamic operating environment. Evolving regulatory trends, difficult economic conditions, and diminishing natural resources, pose serious questions for all players across the food system. Technological innovation, as a means of ensuring future sustainability in the same in the face of such challenges, has been the focus of significant government investment in Ireland. This paper, aims to facilitate a greater understanding of the motivations and barriers influencing the decision by food SMEs to invest in technological innovation emanating from research conducted in publicly‐funded research institutes.

  2. EFFECT OF CORPORATE INNOVATION ABILITY ON THE CHOICE BETWEEN PRODUCT INNOVATION AND PROCESS INNOVATION

    Directory of Open Access Journals (Sweden)

    Zeng Wu

    2010-02-01

    Full Text Available With the method of duopoly game theory, the effect of firms’ innovation ability on the choice between product and process innovation is studied. The concept of cost coefficient of product innovation is introduced, and the criterion equation for the innovation type is derived. The following conclusions are made: the more the product innovation ability, the more the possibility for the firms to carry out the product innovation in both the Bertrand and the Cournot competitions. With the decrease of the product innovation ability, for the high-quality firms, Cournot competitor turns to select the process innovation earlier than the Bertrand competitor. But for the low-quality firms, the Bertrand competitor would select the process innovation firstly.

  3. Facilitation of Educational Process in a University (On the Example of Master's Program "Innovative Bank Strategies and Technologies")

    Science.gov (United States)

    Bondarenko, Tatiana Grigorievna; Isaeva, Ekaterina Anatolievna

    2016-01-01

    Higher school reorganization requires significant restructuring not only of the content, but also of the technology of teaching the students, searching and using teaching tools, which are most suitable for the new educational paradigm and are aimed at interaction between research and teaching staff of a higher educational institution, students and…

  4. Food safety intervention research at the Eastern Regional Research Center: innovative sanitizers, natural antimicrobials and nonthermal processing technologies

    Science.gov (United States)

    Foodborne pathogens such as Salmonella, Listeria monocytogenes and Escherichia coli O157:H7cause millions of illnesses every year. A variety of technologies have been advanced in recent years to expand on the suite of tools available to food processors. At the US Department of Agriculture’s Eastern ...

  5. Disruptive innovation as an entrepreneurial process

    NARCIS (Netherlands)

    Chandra, Y.; Yang, S.-J.S.; Singh, P.; Prajogo, D.; O'Neill, P.; Rahman, S.

    2008-01-01

    Research on conditions and causal mechanisms that influence disruptive innovation has been relatively unexplored in the extant research in disruptive innovation. By re-conceptualizing disruptive innovation as an entrepreneurial process at product, firm and industry levels, this paper draws on emergi

  6. Disruptive innovation as an entrepreneurial process

    NARCIS (Netherlands)

    Chandra, Y.; Yang, S.-J.S.; Singh, P.; Prajogo, D.; O'Neill, P.; Rahman, S.

    2008-01-01

    Research on conditions and causal mechanisms that influence disruptive innovation has been relatively unexplored in the extant research in disruptive innovation. By re-conceptualizing disruptive innovation as an entrepreneurial process at product, firm and industry levels, this paper draws on

  7. Functions of Innovation Systems : A new approach for analysing technological change

    NARCIS (Netherlands)

    Hekkert, Marco; Suurs, R.A.A.; Negro, Simona; Kuhlmann, Stefan; Smits, Ruud

    2007-01-01

    The central idea of this paper is that innovation systems are a very important determinant of technological change. We describe that the emergence of a new innovation system and changes in existing innovation systems co-evolve with the process of technological change. Therefore, it is necessary to c

  8. Functions of Innovation Systems : A new approach for analysing technological change

    NARCIS (Netherlands)

    Hekkert, Marco; Suurs, R.A.A.; Negro, Simona; Kuhlmann, Stefan; Smits, Ruud

    2007-01-01

    The central idea of this paper is that innovation systems are a very important determinant of technological change. We describe that the emergence of a new innovation system and changes in existing innovation systems co-evolve with the process of technological change. Therefore, it is necessary to

  9. The importance of basic factors in innovation processes and their effects on innovation capability of Malaysian-owned manufacturing companies

    Science.gov (United States)

    Suradi, Nur Riza Mohd; Omar, Aminuddin; Shahabuddin, Faridatulazna Ahmad

    2015-02-01

    Innovation is the core ingredient in the competitiveness of today's businesses. Any company that cannot innovate will be losing its competitiveness. While the study on innovation at conceptual level is widely available, there is still lack of deep understanding of how innovation factors impact each stage of the processes of innovation that happen in Malaysian companies. This process-factor approach and understanding may help the government focuses its assistance on relevant factors at relevant process according to the size of the company. This study examines how companies are affected by fundamental factors needed in innovation. Based on results of MYTIC Study 2012 on the level of Technological Innovation Capability (TIC) of Malaysian companies using the RDCB framework, the significance of each innovation factor in each innovation process is determined. This study shows that human resource factor gives more impact than other factors in most processes. Also, financial and human resource factors are likely dictated by the size of the company.

  10. Innovation, what innovation? A comparison between product, process and organizational innovaton

    NARCIS (Netherlands)

    Boer, Harm; Boer, H.; During, W.E.

    2001-01-01

    This article compares and contrasts three types of innovations, namely, product innovation, process innovation and organisational innovation. From similarities and differences between these three types, implications for the theory and practice of innovation management are inferred. Most of these

  11. Innovative aspects of enhancement of management processes in the higher educational institution on the basis of application of modern information and communication technologies

    Directory of Open Access Journals (Sweden)

    I. E. Zhukovskya

    2016-01-01

    Full Text Available This article is devoted to innovative aspects of enhancement of management processes in a higher educational institution on the basis of application of modern information and communication technologies. Research purpose is development of theoretical provisions and practical recommendations about enhancement of management processes in higher education institution on the basis of application of information and communication technologies. This purpose has determined statement and the solution of the following tasks: to research theoretical essence and concept of corporate management of higher education institution; to determine the directions and forms of corporate management in higher education institution; to reveal feature of corporate management processes in higher education institutions; to determine the factors constraining implementation of the corporate principles of management of higher education institution; to develop technology of use of corporate mail of higher education institution on the basis of application of the program MS Outlook complex and a security system of Kerio Control. In the course of research methods of the economic, historical and logical analysis, system approach, a method of analogies, methods of generalization, method of expert evaluations, SWOT analysis, etc. were applied. Applied researches on this problem, and also practical experience of the Tashkent state economic university are used. During writing of article the results containing elements of scientifi c novelty are received: author’s defi nition «corporate management in higher education institution» on macro and microlevels is given. At the macrolevel – this state regulation, support and assistance of processes of implementation, transformation and adaptation of methods, models and the best practices (practice of corporate management to the sphere of the higher education, increase of degree of autonomy of higher education

  12. Measuring Research on County Agricultural Technological Innovation Ability Index

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Taking the mechanism of technological construction guidance theory and mode which consists of "objective-construction-evaluation-construction-objective" as a starting point, on the basis of county agricultural technological innovation ability and its index definition, this paper researches the constructing system of county agricultural technological innovation ability. Firstly, on the basis of defining county agricultural technological innovation ability and the definition of index, according to the principle of purposefulness, scientificity, systematicness, integration of dynamic state and static state, integration of quantitativeness and qualitativeness and so on, we construct the multi-level measuring system of county agricultural technological innovation ability, including 4 first-level indices, namely technological innovation environment, technological innovation basis, technological innovation ability, and technological innovation efficiency; 15 second-level indices, such as technological policy, technological system mechanism, technological institution construction, ability of innovation subject, ability of industrial expansion, scale merit, technological contribution rate. Moreover, this system has 45 third-level indices. Then, by using unascertained mathematics method and AHM method, we establish the multi-level unascertained composite measuring model of county agricultural technological innovation ability index. Finally, by using the survey data of one county in Hebei Province, and the established county agricultural technological innovation ability index model, we get the county agricultural technological innovation ability index of 0.711 by calculation, that is, the innovation ability is at the intermediate level, namely the modern agricultural sub-stage. The empirical research proves the correctness and applicability of this model.

  13. From Radical Innovation to Emerging Technology: Based on the Analysis of the IT Industry Cases

    Institute of Scientific and Technical Information of China (English)

    LI Tian-Zhu; YIN Lu

    2006-01-01

    A process model of radical innovation evolving to emerging technology is built in this paper. Based on some typical cases in IT industry, by using this model, a systematic study about the process, path, characteristics and affect factors of radical innovation evolving to emerging technology is made. The conclusion of this study brings some inspiration for the management of emerging technology.

  14. The Introduction of Innovative Educational Technologies in the Personnel Training Process for Sport and Tourism Industries through the Application of Professional Standards

    Science.gov (United States)

    Zaitseva, Natalia A.; ?ndryushchenko, Lilia ?.

    2016-01-01

    The relevance of the research stems from the importance of modernization of the system of training for sport and tourism, without which the intensive development of this kind of professional activity is not possible. The aim of the study was the generalization of the experience of introduction of the innovative educational technologies in the…

  15. PCP IMMUMOASSAY TECHNOLOGIES - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Three enzyme-linked immunosorbent assay technologies for pentachlorophenol (PCP) testing in soil and water were evaluated. Penta RISc Test Systems (formerly ENSYS, Inc.), EnviroGard™ PCP Immunoassay Test Kit (Millipore Corp.), and Pentachlorophenol RaPID Assay (formerly Ohmicron ...

  16. Emerging Technologies - Capturing Innovation with Technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-12-01

    ET team research results are critical to achieving 50% energy savings across U.S. buildings within the next two decades. The ET team focuses on supporting research, development, and tech-to-market opportunities of high impact technologies, or those that demonstrate potential for achieving significant energy savings cost effectively.

  17. Innovative Technologies for Global Space Exploration

    Science.gov (United States)

    Hay, Jason; Gresham, Elaine; Mullins, Carie; Graham, Rachael; Williams-Byrd; Reeves, John D.

    2012-01-01

    Under the direction of NASA's Exploration Systems Mission Directorate (ESMD), Directorate Integration Office (DIO), The Tauri Group with NASA's Technology Assessment and Integration Team (TAIT) completed several studies and white papers that identify novel technologies for human exploration. These studies provide technical inputs to space exploration roadmaps, identify potential organizations for exploration partnerships, and detail crosscutting technologies that may meet some of NASA's critical needs. These studies are supported by a relational database of more than 400 externally funded technologies relevant to current exploration challenges. The identified technologies can be integrated into existing and developing roadmaps to leverage external resources, thereby reducing the cost of space exploration. This approach to identifying potential spin-in technologies and partnerships could apply to other national space programs, as well as international and multi-government activities. This paper highlights innovative technologies and potential partnerships from economic sectors that historically are less connected to space exploration. It includes breakthrough concepts that could have a significant impact on space exploration and discusses the role of breakthrough concepts in technology planning. Technologies and partnerships are from NASA's Technology Horizons and Technology Frontiers game-changing and breakthrough technology reports as well as the External Government Technology Dataset, briefly described in the paper. The paper highlights example novel technologies that could be spun-in from government and commercial sources, including virtual worlds, synthetic biology, and human augmentation. It will consider how these technologies can impact space exploration and will discuss ongoing activities for planning and preparing them.

  18. Centrifugal shot blasting. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    1999-07-01

    At the US Department of Energy (DOE) Fernald Environmental Management Project (FEMP), the Facilities Closure and Demolition Projects Integrated Remedial Design/Remedial Action (RD/RA) work plan calls for the removal of one inch (1 in) depth of concrete surface in areas where contamination with technetium-99 has been identified. This report describes a comparative demonstration between two concrete removal technologies: an innovative system using Centrifugal Shot Blasting (CSB) and a modified baseline technology called a rotary drum planer.

  19. Fostering Creativity and Innovation through Technology

    Science.gov (United States)

    Vaidyanathan, Sheena

    2012-01-01

    To compete in the global workforce, educators know that their students must be well educated in science, engineering, technology, and mathematics (STEM) subjects. But, as outlined in the NETS, they must also develop the key skills of creativity and innovation. How can educators teach the typically left-brained STEM subjects along with the more…

  20. Technology innovation, human resources and dysfunctional integration

    DEFF Research Database (Denmark)

    Madsen, Arne Stjernholm; Ulhøi, John Parm

    2005-01-01

    (Internet technology), which transcends the traditional business of the company in question. It illustrates what goes wrong when innovative human resources do not succeed in becoming integrated into the rest of the host organization and therefore may become trapped by their own passion in a position as self......-righteous missionaries. In closing, implications for research and management are addressed....

  1. Technology innovation, human resources and dysfunctional integration

    DEFF Research Database (Denmark)

    Madsen, Arne Stjernholm; Ulhøi, John Parm

    2005-01-01

    (Internet technology), which transcends the traditional business of the company in question. It illustrates what goes wrong when innovative human resources do not succeed in becoming integrated into the rest of the host organization and therefore may become trapped by their own passion in a position as self...

  2. Innovative Rehabilitation Technology Demonstration and Evaluation Program

    Science.gov (United States)

    The needs associated with the aging water infrastructure are immense and have been estimated at more than $1 trillion dollars over the next 20 years for water and wastewater utilities. To meet this growing need, utilities require the use of innovative technologies and procedures...

  3. Innovative Processes in Computer Assisted Language Learning

    National Research Council Canada - National Science Library

    Khaled M. Alhawiti

    2015-01-01

    .... qualitative and quantitative research study aims to address the innovative processes in computer-assisted language learning through surveying the reading level and streamline content of the ESL...

  4. The Development Direction of Research on Chinese Technological Innovation

    Directory of Open Access Journals (Sweden)

    Wang Hanxi

    2017-01-01

    Full Text Available The theoretical study of Chinese technological innovation assumes the perspective of prototype structure of scientific being, and consists of four directions of investigations: ontological study of innovation cognition, behavior study of innovation cognition, subjects of innovation cognition, and subjective material foundation of innovation cognition. The study aims to obtain technological innovation capacity through construction of an external technological innovation system. However, an external system would necessarily result in redundancy of systems and decreased operability. For the purpose of environmental friendliness and resource conservation, it is vital for our technological innovation to ignite the intrinsic innovation vitality of the system. Therefore the endogenous mechanism of innovation is the scientific direction to take for the theoretical study of technological innovation.

  5. Overcoming resistance to change in business innovation processes

    Directory of Open Access Journals (Sweden)

    Jose Vicente Berna-Martinez

    2012-07-01

    Full Text Available This paper summarizes the experience gained in dealing with resistance to change appeared in the companies when they develop innovative processes related to the adoption of new technologies,tools, equipment, infrastructure and methodologies. Technological innovation is rapidly absorbed by society on a personal level. But at the enterprise level, resistance to innovation can occur at anyhierarchical level of the company and may appear with different intensity. Depending on the type of enterprise, the hierarchical level of the employee, the intensity of resistance and other factors, the measures taken are different. In this paper we summarize our experience in the cataloging of the resistance to innovation in terms of impact on workers and showing how technology education andbusiness training can help overcome these resistance forces. This paper describes the experience acquired over 22 projects deployed in the period 2005 to 2011 and that has affected a total of 264 workers of different cultural, technological, business and hierarchical levels.

  6. Technology Outlook as a tool for the management of innovation

    Directory of Open Access Journals (Sweden)

    Jon Mikel Zabala-Iturriagagoitia

    2012-03-01

    Full Text Available The purpose of this paper is to present a theoretical overview of innovation management and the tools that can aid in this endeavour. The paper adopts a user-oriented description, aiming at making SMEs familiar with the possibilities opened by innovation management tools in general and technology outlook in particular.The goal of technology outlook is to search, interpret and evaluate information on technological developments in the areas of interest for the company. The process is divided into three general stages: observe, analyze and use. The paper explores all dimensions included in these stages together with the requirements for their implementation in the context of SMEs. In addition we also introduce the roles required for such a process to systematically work: observers, analysts and decision makers. These roles correspond to the previous three stages, so observers are involved during the first step, analysts are related to the second phase and decision makers to the final exploitation.The paper closes by raising some concerns as to why innovation management tools in general and technology outlook in particular are underused in the context of SMEs. The author concludes that if SMEs are to increase their innovative potential, this challenge will be to a great extent dependent on their ability to introduce innovation management routines and tools aligned with their general strategies.

  7. Innovative Information Technology for Space Weather Research

    Science.gov (United States)

    Wang, H.; Qu, M.; Shih, F.; Denker, C.; Gerbessiotis, A.; Lofdahl, M.; Rees, D.; Keller, C.

    2004-05-01

    Solar activity is closely related to the near earth environment -- summarized descriptively as space weather. Changes in space weather have adverse effect on many aspects of life and systems on earth and in space. Real-time, high-quality data and data processing would be a key element to forecast space weather promptly and accurately. Recently, we obtained a funding from US National Science Foundation to apply innovative information technology for space weather prediction. (1) We use the technologies of image processing and pattern recognition, such as image morphology segmentation, Support Vector Machines (SVMs), and neural networks to detect and characterize three important solar activities in real-time: filament eruptions, flares, and emerging flux regions (EFRs). Combining the real time detection with the recent statistical study on the relationship among filament eruptions, flares, EFRs, coronal mass ejections (CMEs), and geomagnetic storms, we are establishing real time report of solar events and automatic forecasting of earth directed CMEs and subsequent geomagnetic storms. (2) We combine state-of-art parallel computing techniques with phase diverse speckle imaging techniques, to yield near real-time diffraction limited images with a cadence of approximately 10 sec. We utilize the multiplicity of parallel paradigms to optimize the calculation of phase diverse speckle imaging to improve calculation speed. With such data, we can monitor flare producing active regions continuously and carry out targeted studies of the evolution and flows in flare producing active regions. (3) We are developing Web based software tools to post our processed data, events and forecasting in real time, and to be integrated with current solar activity and space weather prediction Web pages at BBSO. This will also be a part of Virtual Solar Observatory (VSO) being developed by the solar physics community. This research is supported by NSF ITR program.

  8. Towards a Toolbox for a Process Innovation Laboratory

    DEFF Research Database (Denmark)

    2012-01-01

    the BPI concepts, compare it with Business Process Improvement (BPIm) and Business Process Reengineering (BPR), and then build an analytical framework to define business process innovation from four different perspectives: management science, knowledge management, information technology and quality......Driven by the global competition, process Innovation has been a challenge to large enterprises for many years. The research in this paper discusses about the theory and methods of Business Process Innovation (BPI) in designing Intelligent Supply Chains (ISC) in inter-organizations. We first review...... control/process improvement. Then we present the case study of Genpact, and based on the findings we formulate the challenges towards a toolbox for a process innovation laboratory. These guidelines are the main contribution of this paper....

  9. Towards a Toolbox for a Process Innovation Laboratory

    DEFF Research Database (Denmark)

    2011-01-01

    the BPI concepts, compare it with Business Process Improvement (BPIm) and Business Process Reengineering (BPR), and then build an analytical framework to define business process innovation from four different perspectives: management science, knowledge management, information technology and quality......Driven by the global competition, process Innovation has been a challenge to large enterprises for many years. The research in this paper discusses about the theory and methods of Business Process Innovation (BPI) in designing Intelligent Supply Chains (ISC) in inter-organizations. We first review...... control/process improvement. Then we present the case study of Genpact, and based on the findings we formulate the challenges towards a toolbox for a process innovation laboratory. These guidelines are the main contributions of this paper....

  10. Towards a Toolbox for a Process Innovation Laboratory

    DEFF Research Database (Denmark)

    Gong, Jie; Møller, Charles

    2012-01-01

    the BPI concepts, compare it with Business Process Improvement (BPIm) and Business Process Reengineering (BPR), and then build an analytical framework to define business process innovation from four different perspectives: management science, knowledge management, information technology and quality...... control/process improvement. Then we present the case study of Genpact, and based on the findings we formulate the challenges towards a toolbox for a process innovation laboratory. These guidelines are the main contribution of this paper.......Driven by the global competition, process Innovation has been a challenge to large enterprises for many years. The research in this paper discusses about the theory and methods of Business Process Innovation (BPI) in designing Intelligent Supply Chains (ISC) in inter-organizations. We first review...

  11. Anniversaries of Innovative Drilling Technologies. Reference Review Program

    Directory of Open Access Journals (Sweden)

    Кozhevnikov, А.А.

    2015-07-01

    Full Text Available Processes of formation of diamond rock cutting tools, namely big diamond drilling crown; small diamond drilling crown; crown equipped with synthetic diamonds; reinforced by composite materials using diamonds are considered. Stages of innovative development of drilling technologies are presented.

  12. Information Technology and Firm Performance: The Role of Innovation

    NARCIS (Netherlands)

    Zand, F.

    2011-01-01

    There is an essential quest in the literature to open up the “black box” of Information Technology (IT) by identifying and explaining how and why IT creates value for the firm. The present dissertation is an attempt to clarify the role of innovation in the process of value creation from IT investmen

  13. Which One Triggers the Other? Technological or Social Innovation

    Science.gov (United States)

    Bulut, Cagri; Eren, Hakan; Halac, Duygu Seckin

    2013-01-01

    The term "innovation" has sometimes been used as a synonym for technological innovation until the concept of "social innovation" attracted academic attention. Since then, these two types of innovation have been investigated individually. It can be claimed that, despite the great importance of social innovation studies,…

  14. Which One Triggers the Other? Technological or Social Innovation

    Science.gov (United States)

    Bulut, Cagri; Eren, Hakan; Halac, Duygu Seckin

    2013-01-01

    The term "innovation" has sometimes been used as a synonym for technological innovation until the concept of "social innovation" attracted academic attention. Since then, these two types of innovation have been investigated individually. It can be claimed that, despite the great importance of social innovation studies,…

  15. Fashion retail innovation: about context, antecedents and outcome in technological change projects

    DEFF Research Database (Denmark)

    Tambo, Torben

    2015-01-01

    Fashion retail is recognised for its strong capabilities in product innovation, while also having the potential to improve the governance of technology-based process innovation. This chapter proposes a model perspective in management of technology and innovation, including special requirements of...... characteristics of the fashion retail industry.......Fashion retail is recognised for its strong capabilities in product innovation, while also having the potential to improve the governance of technology-based process innovation. This chapter proposes a model perspective in management of technology and innovation, including special requirements...... of fashion retailing. In particular, this chapter discusses the context of fashion retailing understood as product and brand-based characteristics. A case study-based methodology is then used to guide an analysis of antecedents and (expected) outcome of fashion retail innovation. IT-based innovation...

  16. Limitations of Technological Innovations in Modern Russian Industry

    Directory of Open Access Journals (Sweden)

    Aleksandr Vladimirovich Chernysh

    2016-03-01

    Full Text Available The article discusses the economic growth in the conditions of current economic situation and the sanctions against Russia. The development of import replacement industries will allow rebuilding the Russian products competitiveness in quality and price in the domestic market and increasing the export to foreign markets. The author concludes that the strategy of the Russian Federation industries development is to modernize enterprises by implementing technological innovation programs. The main problems hindering the large-scale implementation of innovation policy were revealed on the basis of the analysis, and the possibilities of their solutions were offered. The study reveals that major factors hindering the large scale implementation of innovation policy are high risks and lack of finance. The diversity of approaches to programs efficiency estimation and the lack of a unified estimation methodology reasonably do not allow the enterprises to obtain additional funding from potential investors. To solve this task the author proposes to develop and adopt a single “recommended by the Russian Federation Government” methodology for estimating the technological innovation programs efficiency, which when applied by the company could attract potential investors due to clear and consistent indicators of project performance. The author reasons the necessity to consider some guidelines in this methodology: to estimate efficiency at each stage; to consider innovation process generation; to reflect operational, financial and investment efficiency and integral effect of the originator, producer, consumer and budget; to consider special characteristics of economic branches and technological innovation life cycles.

  17. Production chain and innovative technologies for living

    Directory of Open Access Journals (Sweden)

    Eugenio Arbizzani

    2012-10-01

    Full Text Available The continued growth of residential demand, coupled with the significant decline of the housing market, is encouraging the development of many procedural and constructive experiments on the theme of affordable housing for a range of users increasingly unable to access home ownership. The spread of an approach to planning that is socially, economically and technologically sustainable, represents a culture of quality that is once more measurable, which makes it possible today to define innovative building models for the industrial and production chain. The use of innovative and integrated industrialised building systems may be one of the supporting factors in the achievement of the objectives of social housing.

  18. Innovative developments in sand reclamation technologies

    Directory of Open Access Journals (Sweden)

    R. Dañko

    2011-04-01

    Full Text Available Proper sand management and efficient sand reclamation system are two main factors influencing economical and ecological side of modern foundry plant. It is well known fact that the production of 1 metric ton of casting from ferrous alloys generates circa 1 metric ton of waste [1], which due to containing certain amounts of harmful and dangerous compounds should undergo a reclamation – at least of the main component, which means a silica sand grains. The paper present problems of scientific and development research concerning the innovative reclamation technologies of used foundry sands such as: mechanical-cryogenic reclamation and innovative thermal reclamation.

  19. The role of Fe and Ni for s-process nucleosynthesis in the early Universe and for innovative nuclear technologies

    CERN Multimedia

    Manousos, A; Heil, M; Plag, R

    The early universe was enriched in heavy elements by massive stars via their s- and r-process contributions. Ultra metal-poor stars were found to show abundance patterns that scale exactly with the solar r component. While this holds exactly for elements heavier than barium, there is still confusion about significant discrepancies in the mass region below A ${\\leq}$ 120. It is known that massive stars contribute significantly to the abundances between Fe and Zr. This so-called weak s-process component was found to exhibit large uncertainties due to the poorly known cross sections, especially in the Fe- i region. In view of this problem it is proposed to perform accurate state-of-the art measurements on highly enriched samples of the stable Fe and Ni isotopes at the n_TOF facility. Transformation of these results into significantly improved stellar cross section rates will allow to disentangle the s and r contributions observed in the oldest stars for a reliable comparison with galactic chemical evolution mode...

  20. Grounding the Innovation of Future Technologies

    Directory of Open Access Journals (Sweden)

    Antti Oulasvirta

    2005-01-01

    Full Text Available Mobile and ubiquitous technologies can potentially change the role of information and communication technology in human lives. Empirical, human-centered approaches are emerging as an alternative to technology-driven approaches in the innovation of these technologies. Three necessary empirical stages, intertwined with analytical ones and with each informing and grounding the succeeding stages, are analyzed. First, needfinding is utilized to discover societal and individual demands for technology. Second, observational and experimental studies examine the social and cognitive preconditions for interaction. From these two steps, a hypothesis is formulated regarding how technology will change existing practices. Finally, this hypothesis, embodied in the design of a prototype, is tested in a field trial. Four design cases illustrate the value of empirical grounding.

  1. Disruptive Innovation in Air Measurement Technology: Reality ...

    Science.gov (United States)

    This presentation is a big picture overview on the changing state of air measurement technology in the world, with a focus on the introduction of low-cost sensors into the market place. The presentation discusses how these new technologies may be a case study in disruptive innovation for the air pollution measurement field. The intended audience is primarily those with experience in air pollution measurement methods, but much of the talk is accessible to the general public. This is a keynote presentation on emerging air monitoring technology, to be provided at the AWMA measurements conference in March, 2016.

  2. Innovation drivers and barriers in food processing

    NARCIS (Netherlands)

    Fortuin, F.T.J.M.; Omta, S.W.F.

    2009-01-01

    Purpose - The food processing industry, confronted with increased global competition and more stringent customer demands, is pressurized to improve the pace and quality of its innovation processes. This paper aims to find out what factors constitute the main drivers and barriers to innovation and to

  3. Innovation drivers and barriers in food processing

    NARCIS (Netherlands)

    Fortuin, F.T.J.M.; Omta, S.W.F.

    2009-01-01

    Purpose - The food processing industry, confronted with increased global competition and more stringent customer demands, is pressurized to improve the pace and quality of its innovation processes. This paper aims to find out what factors constitute the main drivers and barriers to innovation and to

  4. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...... and technology factors in organizations. Theoretical implications call for a design-oriented view of technology and process alignment....

  5. Monitoring system of technological innovation potential on the market

    Directory of Open Access Journals (Sweden)

    O.P. Kosenko

    2016-12-01

    Full Text Available The aim of the article. The main purpose of the study is to develop practical tools for monitoring and evaluating commercial potential results of creative industry and identify strategic directions for their further developments. The results of the analysis. The article confirmed that timely monitoring of the enterprise intellectual potential and commercial possibilities of the individual technological developments can become the basis for points of growth identification, early detecting of negative trends, determining the optimal ratio of both traditional and new areas of the enterprise. The results of the monitoring process are also needed for managing decisions at both the enterprise and at the regional level of the country. So in this case we can consider very relevant the development of algorithms for monitoring and evaluating commercial potential of intellectual development industry. It is proved that the accuracy and objectivity of the current state of the technological innovation commercial potential depends more on the potential economic benefit that is available for developers of technological innovations in their commercialization, and consumer technology in their use. With economic effect parameters developer and consumer of technological innovation generated tangential monitoring function and economic characteristics defined set of values. It is proposed to improve the accuracy and reliability of the results to take into account quality monitoring of technological developments and commercial risk implementation. Proposed to take into account the indicators during the monitoring process Placed sponsored task performed using arctangent monitoring function that includes the integral index of a technology and successful commercialization state of the risk ,also was calculated the number of factors affecting it. It was proved that the most efficient monitoring of commercial potential (level of market attractiveness with technological

  6. Enacting outsourcing: An innovation process perspective

    Directory of Open Access Journals (Sweden)

    Benedikte Borgström

    2010-11-01

    Full Text Available Much research has been done on outsourcing. However, we still know little about outsourcing based on a social process view on innovation. Outsourcing is an innovation as a logistics-related process that is perceived as new by the adopter. We will explore and analyse an outsourcing idea, its development and implementation, from an innovation perspective. The development is studied in a qualitative, long-term process study. The analysis draws on Hoholm’s (2009 model of innovation processes. It extends the applicability of this innovation model and its methodology of following the action into logistics and supply chain management (SCM research. The outsourcing process is an innovation that develops in a rational way based on the incremental process because of its actor-network and simultaneous reflection. Interactions and confrontations come about because of involved contrary forces such as competing objectives. The model explains the practice of SCM innovation and increases the understanding of dynamics and complexity. The process study brings insights to cause-effect relations in the development of outsourcing that are consequential to innovative logistics and SCM.

  7. Barriers to using consumer science information in food technology innovations: An exploratory study using Delphi methodology

    NARCIS (Netherlands)

    Raley, Marian E.; Ragona, Maddalena; Sijtsema, S.J.; Fischer, A.R.H.; Frewer, L.J.

    2016-01-01

    Food technology innovation has the potential to deliver many benets to society, although some technologies have been problematic in terms of public acceptance. In promoting the commercial success of innovative technological processes and resultant products it will be important to incorporate
    inf

  8. Technology innovation for patients with kidney disease.

    Science.gov (United States)

    Mitsides, Nicos; Keane, David F; Lindley, Elizabeth; Mitra, Sandip

    2014-01-01

    The loss of kidney function is a life-changing event leading to life-long dependence on healthcare. Around 5000 people are diagnosed with kidney failure every year. Historically, technology in renal medicine has been employed for replacement therapies. Recently, a lot of emphasis has been placed on technologies that aid early identification and prevent progression of kidney disease, while at the same time empowering affected individuals to gain control over their chronic illness. There is a shift in diversity of technology development, driven by collaborative innovation initiatives such the National Institute's for Health Research Healthcare Technology Co-operative for Devices for Dignity. This has seen the emergence of the patient as a key figure in designing technologies that are fit for purpose, while business involvement has ensured uptake and sustainability of these developments. An embodiment of this approach is the first successful Small Business Research Initiative in the field of renal medicine in the UK.

  9. Problems of Agricultural Technological Innovation in China and Countermeasures

    Institute of Scientific and Technical Information of China (English)

    Hongbo; LIU; Ren; LIU; Huazhen; LIU

    2013-01-01

    Major problems of agricultural technological innovation in China were summarized as below: first,poor agricultural science and technology system; second,deficient technological promotion system; third,shortage of agricultural professionals; fourth,serious shortage of science and technology input. In view of these problems,the following suggestions were given to improve the innovation of agricultural technology in China. ( 1) Restructuring agricultural research institutes,establishing cooperative innovation centers,improving agricultural technological innovation system; ( 2) Specifying the direction of research projects,improving scientific research level of technicians,so as to improve the agricultural technological innovation capacity; ( 3) Improving promotion and service stations in towns,organizing technological service teams of agricultural universities and colleges,establishing agricultural technological promotion systems; ( 4) Increasing input in agricultural technological innovation by attracting government input,enterprise investment and other financial support; ( 5) Cultivating more talents of agricultural technology,training leading agricultural technicians,grassroots agricultural service staff and practical talents.

  10. Removable Urban Pavements: An innovative, sustainable technology

    OpenAIRE

    2012-01-01

    Removable Urban Pavements: An innovative, sustainable technology By definition, a Removable Urban Pavement (RUP) can be quickly opened and closed, using lightweight equipment, for easy access to underground networks. While no such pavement appears to have ever been constructed, the premises of the concept can be found in certain military paths or industrial soils. A survey conducted among French municipal authorities has revealed the potential benefit of the RUP concept in decreasing the publ...

  11. Emerging Technological Risk Underpinning the Risk of Technology Innovation

    CERN Document Server

    Anderson, Stuart

    2012-01-01

    Classes of socio-technical hazards allow a characterization of the risk in technology innovation and clarify the mechanisms underpinning emergent technological risk. Emerging Technological Risk provides an interdisciplinary account of risk in socio-technical systems including hazards which highlight: ·         How technological risk crosses organizational boundaries, ·         How technological trajectories and evolution develop from resolving tensions emerging between social aspects of organisations and technologies and ·         How social behaviour shapes, and is shaped by, technology. Addressing an audience from a range of academic and professional backgrounds, Emerging Technological Risk is a key source for those who wish to benefit from a detail and methodical exposure to multiple perspectives on technological risk. By providing a synthesis of recent work on risk that captures the complex mechanisms that characterize the emergence of risk in technology innovation, Emerging Tec...

  12. Innovations in food technology for health.

    Science.gov (United States)

    Hsieh, Yun-Hwa Peggy; Ofori, Jack Appiah

    2007-01-01

    Modern nutritional science is providing ever more information on the functions and mechanisms of specific food components in health promotion and/or disease prevention. In response to demands from increasingly health conscious consumers, the global trend is for food industries to translate nutritional information into consumer reality by developing food products that provide not only superior sensory appeal but also nutritional and health benefits. Today's busy life styles are also driving the development of healthy convenience foods. Recent innovations in food technologies have led to the use of many traditional technologies, such as fermentation, extraction, encapsulation, fat replacement, and enzyme technology, to produce new health food ingredients, reduce or remove undesirable food components, add specific nutrient or functional ingredients, modify food compositions, mask undesirable flavors or stabilize ingredients. Modern biotechnology has even revolutionized the way foods are created. Recent discoveries in gene science are making it possible to manipulate the components in natural foods. In combination with biofermentation, desirable natural compounds can now be produced in large amounts at a low cost and with little environmental impact. Nanotechnology is also beginning to find potential applications in the area of food and agriculture. Although the use of new technologies in the production of health foods is often a cause for concern, the possibility that innovative food technology will allow us to produce a wide variety of food with enhanced flavor and texture, while at the same time conferring multiple health benefits on the consumer, is very exciting.

  13. Managing risks in business model innovation processes

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2010-01-01

    ) innovation is a risky enterprise, many companies are still choosing not to apply any risk management in the BM innovation process. The objective of this paper is to develop a better understanding of how risks are handled in the practice of BM innovation. An analysis of the BM innovation experiences of two......Companies today, in some industries more than others, invest more capital and resources just to stay competitive, develop more diverse solutions, and increasingly start thinking more radically when considering their business models. However, despite the understanding that business model (BM...... industrial companies shows that both companies are experiencing high levels of uncertainty and complexity during their innovation processes and are, consequently, struggling to find new processes for handling the risks involved. Based on the two companies’ experiences, various testable propositions are put...

  14. Secondary relative evaluations on regional technology innovation capability in SMEs

    Institute of Scientific and Technical Information of China (English)

    BI Ke-xin; SUN Jin-hua; FENG Ying-jun

    2005-01-01

    According to this problem that every regional technology innovation of SMEs and innovation environment are different, the method on secondary relative evaluation to measure the innovation capability of SMEs in 9 provinces and 3 municipalities is developed in this paper. First the Fuzzy Integral Comprehensive Evaluation is adopted to measure the comprehensive index states of technological innovation of SMEs in different regions,and then the BCC model in Data Envelopment Analysis is used to calculate the secondary relative evaluation of regional technology innovation capability in SMEs, so that this method not only settles the relevance between indexes influencing regional technology innovation capability of SMEs, but also eliminates the influence of objective basic condition, and then provides bases for every region to make out policies and rules on technological innovation of SMEs and for enterprise to establish relevant strategy of technological innovation.

  15. Essays on Energy Technology Innovation Policy

    Science.gov (United States)

    Chan, Gabriel Angelo Sherak

    Motivated by global climate change, enhancing innovation systems for energy technologies is seen as one of the largest public policy challenges of the near future. The role of policy in enhancing energy innovation systems takes several forms: public provision of research and develop funding, facilitating the private sector's capability to develop new technologies, and creating incentives for private actors to adopt innovative and appropriate technologies. This dissertation explores research questions that span this range of policies to develop insights in how energy technology innovation policy can be reformed in the face of climate change. The first chapter of this dissertation explores how decision making to allocate public research and development funding could be improved through the integration of expert technology forecasts. I present a framework to evaluate and optimize the U.S. Department of Energy's research and development portfolio of applied energy projects, accounting for spillovers from technical complimentary and competition for the same market share. This project integrates one of the largest and most comprehensive sets of expert elicitations on energy technologies (Anadon et al., 2014b) in a benefit evaluation framework. This work entailed developing a new method for probability distribution sampling that accommodates the information that can be provided by expert elicitations. The results of this project show that public research and development in energy storage and solar photovoltaic technologies has the greatest marginal returns to economic surplus, but the methodology developed in this chapter is broadly applicable to other public and private R&D-sponsoring organizations. The second chapter of this dissertation explores how policies to transfer technologies from federally funded research laboratories to commercialization partners, largely private firms, create knowledge spillovers that lead to further innovation. In this chapter, I study the U

  16. Innovating Healthcare Processes for Speed and Effectiveness

    Directory of Open Access Journals (Sweden)

    Maryline Margueritte

    2013-12-01

    Full Text Available For several years, health networks have developed devices enabling coordinated care of patients in France, regarding both medical plans as well as medico-psycho-social and human care. Some have developed computerized health records for sharing useful information for the coordination and continuity of care. Since the 2009 hospital reform, cooperative operating modes between health system professionals and users are being installed. The implementation of a health information system permits, on one hand, to ensure the transversality of the business process with the patient and, on the other hand, to measure the results of the medical and economic evolution of a complex system of information. The possibilities offered by new technologies of information and communication enable the development of applications supporting increased "on line" participation for citizens. The "ambulatory approach" exports healthcare outside hospital walls. This is an innovative medicine allowing the patient to stay at his home. In France, this re-engineering is based on four areas: a medical record, a collective ownership by the medical and paramedical professions, empowerment of patients and networking in the health sector.Keywords: Health; Networks; Information System; Innovation; Medicine; Patients; Science.

  17. Intermediaries in the Management Process of Innovation

    DEFF Research Database (Denmark)

    Gretzinger, Susanne; Hinz, Holger; Matiaske, Wenzel

    2012-01-01

    Information is a critical resource in innovation processes. SMEs are therefore advised to draw on consulting in innovation processes, as they cannot ensure the necessary information flow internally due to lesser resources. From the strategic point of view, the involvement of intermediaries is acc...... is accompanied by the risk of losing specific knowledge to the business environment. But the other way around: To neglect the integration of consultancies could mean a deficit in the process of information management.......Information is a critical resource in innovation processes. SMEs are therefore advised to draw on consulting in innovation processes, as they cannot ensure the necessary information flow internally due to lesser resources. From the strategic point of view, the involvement of intermediaries...

  18. Intermediaries in the Management Process of Innovation

    DEFF Research Database (Denmark)

    Gretzinger, Susanne; Hinz, Holger; Matiaske, Wenzel

    2012-01-01

    Information is a critical resource in innovation processes. SMEs are therefore advised to draw on consulting in innovation processes, as they cannot ensure the necessary information flow internally due to lesser resources. From the strategic point of view, the involvement of intermediaries is acc...... is accompanied by the risk of losing specific knowledge to the business environment. But the other way around: To neglect the integration of consultancies could mean a deficit in the process of information management.......Information is a critical resource in innovation processes. SMEs are therefore advised to draw on consulting in innovation processes, as they cannot ensure the necessary information flow internally due to lesser resources. From the strategic point of view, the involvement of intermediaries...

  19. Educational innovation, learning technologies and Virtual culture potential'

    Directory of Open Access Journals (Sweden)

    David Riley

    2002-12-01

    Full Text Available Learning technologies are regularly associated with innovative teaching but will they contribute to profound innovations in education itself? This paper addresses the question by building upon Merlin.Donald's co-evolutionary theory of mind, cognition and culture. He claimed that the invention of technologies for storing and sharing external symbol systems, such as writing, gave rise to a 'theoretic culture' with rich symbolic representations and a resultant need for formal education. More recently, Shaffer and Kaput have claimed that the development of external and shared symbol-processing technologies is giving rise to an emerging 'virtual culture'. They argue that mathematics curricula are grounded in theoretic culture and should change to meet the novel demands of 'virtual culture' for symbol-processing and representational fluency. The generic character of their cultural claim is noted in this paper and it is suggested that equivalent pedagogic arguments are applicable across the educational spectrum. Hence, four general characteristics of virtual culture are proposed, against which applications of learning technologies can be evaluated for their innovative potential. Two illustrative uses of learning technologies are evaluated in terms of their 'virtual culture potential' and some anticipated questions about this approach are discussed towards the end of the paper.

  20. Mineral Processing Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-09-01

    This document represents the roadmap for Processing Technology Research in the US Mining Industry. It was developed based on the results of a Processing Technology Roadmap Workshop sponsored by the National Mining Association in conjunction with the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held January 24 - 25, 2000.

  1. 消费者嵌入式开放创新价值生成过程研究--基于消费类电子信息产品技术创新的视角%Research on the Value Generated Process of Consumer Embedded Open Innovation Based on the Perspective of Technology Innovation of Consuming Electronic and Information Products

    Institute of Scientific and Technical Information of China (English)

    许爱萍

    2015-01-01

    消费类电子信息产品创新过程越来越重视客户体验和需要,将顾客视为最终消费者的企业-顾客互动式创新模式已经难以满足消费类电子技术高速创新的需要。提出顾客嵌入式开放创新的概念和内涵,并对消费类电子信息产品顾客嵌入式开放创新过程和创新价值生成过程进行剖析,有助于探究顾客嵌入技术创新的轨迹,以期为相关产业开放式技术创新提供参考。%More and more consuming electronic information product companies focus on customers experience in the inno-vative process and choose open innovative models to fit customer needs. The businesses and customer interactive innovation model which treats consumers as the final consumer is barely to meet the high speed of consuming electronics information technology innovation. In the paper,the concept and content of embedded customers open innovation is proposed,and the consumer embedded open innovation process of consuming electronics and information technology products and its value generation process is explored,which will help exploring the trajectory of embedded innovation in order to provide a refer-ence to open technology innovation for related industries.

  2. Determining Technological Innovation and Competitiveness: A Cross Organizational Analysis of the Malaysian Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Amlus Ibrahim

    2012-01-01

    Full Text Available This study analyzed the determinants of technological innovation in the Malaysian manufacturing industry. Its main purpose is to identify a set of management- related variables characterizing Malaysian innovative firms. Moreover, the study aimed to test whether the set of determinant differs for firms with different technological trajectories. A sample of 204 Malaysian firms was used for the investigation, with one respondent from each firm. The questionnaire measured the technological innovation, as well as 5 main potential determinants of innovation adopted from literature. Statistical analysis used, including bivariate correlation and multivariate regression, in identifying association between the technological innovation and the determining variables. The results of the analysis lead the researcher to the model of 5 important determining factors of technological innovation. The important factors were intensity of R&D, trvhnoogical trajectories,intensity of marketing, engineers, scientist and managers with experience locally and technical competency of personnel,. The analysis of technological trajectories confirmed the hypotheses that set of important determinants of innovation as well as the extent of technological innovation differs for firms in different innovation processes.Keywords: Technologies trajectories, technological innovation, intensity of R&D.

  3. Understanding the build-up of a technological innovation system around hydrogen and fuel cell technologies

    Energy Technology Data Exchange (ETDEWEB)

    Suurs, Roald A.A. [Innovation Studies Group, Copernicus Institute for Sustainable Development and Innovation, Utrecht University, Heidelberglaan 2, 3584 CS Utrecht (Netherlands); TNO Built Environment and Geosciences, Business Unit Innovation and Environment, Van Mourik Broekmanweg 6, 2628 XE Delft (Netherlands); Hekkert, Marko P.; Smits, Ruud E.H.M. [Innovation Studies Group, Copernicus Institute for Sustainable Development and Innovation, Utrecht University, Heidelberglaan 2, 3584 CS Utrecht (Netherlands)

    2009-12-15

    This study provides insight into the development of hydrogen and fuel cell technologies in the Netherlands (1980-2007). This is done by applying a Technological Innovation System (TIS) approach. This approach takes the perspective that a technology is shaped by a surrounding network of actors, institutions and technologies. When a technology is in an early stage of development, a TIS has yet to be built up in order to propel technological progress. This build-up process is studied for the hydrogen and fuel cell innovation system in the Netherlands. This is done by systematically studying the dynamics of seven key activities that accelerated (or slowed down) developments around hydrogen and fuel cell technologies. The analysis contributes to a better understanding of these dynamics and of the drivers and barriers that caused them to emerge. The study derives important lessons for practitioners. (author)

  4. Innovating Education and Educating for Innovation: The Power of Digital Technologies and Skills

    Science.gov (United States)

    OECD Publishing, 2016

    2016-01-01

    OECD's Innovation Strategy calls upon all sectors in the economy and society to innovate in order to foster productivity, growth and well-being. Education systems are critically important for innovation through the development of skills that nurture new ideas and technologies. However, whereas digital technologies are profoundly changing the way…

  5. USCAL mechatronics engineering, a strategic process of innovation and technological competition; USCAL ingenieria mecatronica un proceso estrategico de innovacion y competencia tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    Carsi Sister, R.; Lopez Perez, R.

    2010-07-01

    The automobile industry in Navarra got its momentum in 1970 with the launching of the Mini 850 manufactured by British Leyland. Since then, two large automobile brands (SEAT and VOLSKWAGEN) have fueled the introduction of out sourcing practices with local suppliers and have given raise to the building of the automobile auxiliary industry in Navarra. This article describes the growing and internationalization path of a Spanish technological company called USCAL and outlines the importance of keeping innovation as a key element to maintain sustainable business growth. (Author) 15 refs.

  6. INNOVATION PROCESS IN OPEN CAPITAL BRAZILIAN COMPANIES

    Directory of Open Access Journals (Sweden)

    Ricardo Floriani

    2013-12-01

    Full Text Available This study aims to identify the innovation process used by the open capital Brazilian companies and establish a ranking of the potentially innovative ones. For this, a questionnaire was sent to 484 companies with shares traded in Bovespa, receiving a response from 22. The innovation process is based on the model of Barrett and Sexton (2006. A summary of the results is presented below. (i Organizational Capabilities – 95.5% answered that they have incentives for innovation activities and 68.2% reported having procedures for all services. The leadership has a facilitator role encouraging the initiative (86.4% and promotes the maintenance of the group relationship (72.7%. Value risk taking, even through failures and prioritize the learning and experimenting new ideas. (ii Background of the innovation – reveals aspects of the capacity (internal or (external. Of the respondents, 59.1% developed internal activities of continuing P & D. Training to innovate is present in a continuous or occasional basis in 81.8% of the companies. The respondents characterize the economic environment as dynamic and the majority purchased software and equipments. In only 12 opportunities was a reference to obtaining patents as innovation protection measure. (iii Focus of innovation – the majority of the companies mentioned process or product innovation. Rewards are offered when the objectives are met and it is brought to attention when this does not occur. (iv Highlighted performance – the innovations achieved the expectations and created effects. The relevant benefits noticed were: improvement in quality of goods and services, increase of market share, increase of goods and services, and increase of productive capacity.

  7. On SD-oriented mechanism of technological innovation

    Institute of Scientific and Technical Information of China (English)

    Yang Yuwen; Zhang Juyong

    2007-01-01

    If one enterprise just takes technological innovation as the way for economic profit but not the combinational profit of economy,society and ecology,it will never survive in this fierce competition market.Based on the relationship between technological innovation and sustainable development,this paper brings forward that technological innovation must take the sustainablel development of society as the fundamental goal.Technological innovation should be the real impulse for the development of society,economy and ecology.On the basis of the analysis on previous technologicalinnovation impetus mechanism,combined with the influential factors,this paper puts forward SD-oriented mechanism oftechnological innovation.

  8. New Technologies, Old Habits: Automation without Innovation

    Directory of Open Access Journals (Sweden)

    José Osvaldo De Sordi

    2012-01-01

    Full Text Available This research investigated the underuse of technological tools by innovative organizations which are acknowledged for their use of and familiarity with new technologies. The research conducted an analysis of 58 institutional repositories (IRs out of 43 educational and research institutions which are internationally renowned for excellence. The core aspect of the analysis was the use of IRs for publishing and dealing with evidence in order to legitimize and add value to scientific research. The following items were analyzed: (a the logical structuring of scientific communication published in the IRs; (b the metadata which describe scientific communication based on the terms of the DCMI protocol used; (c the availability of software functions which facilitate the queries and publication of evidences. Results show that the introduction of IRs did not add value to the quality of research in terms of associating and publishing evidence that could back them up. A strong tendency to replicate the traditional library model of physical collections was observed. It was concluded that merely possessing good technological tools is not sufficient for fostering innovation and strategic gains in organizations, even if their implementation takes place in highly promising and favorable environments.

  9. Innovative Technologies for Optical and Infrared Astronomy

    CERN Document Server

    Cunningham, C R; Molster, F; Kendrew, S; Kenworthy, M A; Snik, F

    2012-01-01

    Advances in astronomy are often enabled by adoption of new technology. In some instances this is where the technology has been invented specifically for astronomy, but more usually it is adopted from another scientific or industrial area of application. The adoption of new technology typically occurs via one of two processes. The more usual is incremental progress by a series of small improvements, but occasionally this process is disruptive, where a new technology completely replaces an older one. One of the activities of the OPTICON Key Technology Network over the past few years has been a technology forecasting exercise. Here we report on a recent event which focused on the more radical, potentially disruptive technologies for ground-based, optical and infrared astronomy.

  10. OPEN INNOVATION PROJECT: THE SYSTEM OF ONLINE INDICATORS IN SCIENCE, TECHNOLOGY AND INNOVATION OF AMAZONAS (SiON

    Directory of Open Access Journals (Sweden)

    Moises Andrade Coelho

    2016-05-01

    Full Text Available This study aims to evaluate the implementation of an open innovation project in a public institution in the state of Amazonas. The theoretical and empirical background deals with science, technology and innovation indicators and open innovation. The study is characterized as a qualitative and descriptive research, with the case study as a methodological procedure. The delimitation of the universe was composed by a public institution in the area of science, technology and innovation (ST&I. In the case study, it was used an approach as tool to assess the implementation of open innovation projects. The results are shown several stages of open innovation project analyzed.  The study demonstrates the implications of open innovation project adoption to the strengthening of external networks and the maturing of the internal environment. The relevance of the study is based on the evaluation of an open innovation project in a public institution in order to foster the transition from traditional innovation processes to open innovation processes.

  11. Steam vacuum cleaning. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. The baseline technology currently used for washing debris is a high-pressure water cleaning (HPWC) system. The system used at the FEMP is the Hotsy{reg_sign} Model 550B HPWC. Although the HPWC technology has functioned satisfactorily, improvements are being sought in areas related to reduced liquid waste volume, increased productivity, increased washing effectiveness, and decreased airborne contamination. An innovative technology that offers potential improvements in these areas is a steam vacuum cleaning (SVC) system that integrates high-pressure steam cleaning with a vacuum recovery sub-system that simultaneously collects dislodged contaminants thereby reducing airborne contamination. The SVC system selected for demonstration at the FEMP was the Kelly{trademark} Decontamination System shown. This report provides comparative performance and cost analyses between the Hotsy HPWC system and the Kelly Decontamination System. Both technologies were demonstrated at the FEMP site located at Fernald, Ohio from July 29, 1996 through August 15, 1996. The demonstrations were conducted at the FEMP Plant 1 as part of the LSTD project sponsored by the Deactivation and Decommissioning Focus Area (DDFA) of the US DOE`s Office of Science and Technology.

  12. REGIONALIZATION OF MANAGEMENT PROCESS BY INNOVATIVE ACTIVITY

    Directory of Open Access Journals (Sweden)

    E. V. Sibirskaia

    2014-01-01

    Full Text Available Summary. In current market conditions, the economy and Russia's accession to international trade scholars and experts from various fields of knowledge paying special attention to a huge set of regional problems. The growing role of regional research determines the level of establishing effective mechanisms for the implementation of the economic interests of actors as well as economic development and improving the quality of human life is the priority objectives of federal, regional and local authorities. Today, the Russian economic science faces a global goal - to develop ways and means of transformation of the Russian economy and bring it to a path of sustainable, innovative development, providing new quality of life. Achieving this goal must surely be a central task of the Russian economics and politics, as in the near future and the long term In article authors opened the maintenance of determinants of innovative development of the territory, mediated by strengthening of regionalization of management by innovative activity: condition of resource and innovative potential; the developed forms and nature of interaction between public authorities of regional level, local community and business; applied forms of integration of subjects of managing for realization of their innovative potential due to expansion of opportunities of participation in the perspective directions of scientific and technical, economic and social development; system of the incentives developing favorable conditions for introduction and development of innovative technologies, and also increases in the enterprise activity, formed by the external institutional environment; regional economic policy as instrument of increase of efficiency of innovative activity.

  13. Small Businesses are More Active as Inventors than as Innovators in the Innovation Process.

    Science.gov (United States)

    1981-12-31

    small businesses to the innovation process. GAO concludes that small businesses have been important contributors to the innova - tion process and that...WILLARD F. MUELLER, Market Structure and Technological Performance in the Food Manufacturing industry (1979). Two periods of innova - tire activity in the...small businesses have been significant contributors to the innova - tion process. While we are not able to generalize from the exist- ing evidence to

  14. The Influence of Demographic Factor on Personal Innovativeness towards Technology Acceptance

    Science.gov (United States)

    Noh, Noraini Mohamed; Hamzah, Mahizer; Abdullah, Norazilawati

    2016-01-01

    Library and Media Teacher (LMT) readiness of accepting and using technology innovation earlier than their colleagues could expedite the technology innovation process into the school education system. The aim of this paper is to report on a study that explored the impact of experience in using computer and the level of ICT knowledge towards…

  15. Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

    Science.gov (United States)

    Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

    2015-11-30

    Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner.

  16. Innovation adoption processes for third party property management companies

    Energy Technology Data Exchange (ETDEWEB)

    Shockman, Chris; Piette, Mary Ann

    2000-07-01

    Innovation adoption studies have never been applied to third party property management companies. These companies manage buildings for a fee as their primary business. Property management companies are influential in the adoption process for new technologies because they act as gatekeepers for technical information. This study analyzes radical and routine adoption process that are found in large, professionally operated property management companies. The process is explicated. The technical managers, and their role as technology gate keepers, are described. The distinction to the technical managers between routine and radical technology is that routine technologies do something in a new way and radical technologies do something new. Observations concerning evaluation and adoption of information technologies are described. The findings suggest methods of successfully tailoring and introducing technologies to this market.

  17. Information and Communication Technologies Innovations conference

    CERN Document Server

    Kocarev, Ljupco

    2012-01-01

    Information and Communication Technologies has enlarged its horizon and it is practiced under multidisciplinary contexts that introduce new challenges to theoretical and technical approaches. The most critical benefit of introducing new ICT technologies in our real world living are the new ways of working that the online world makes possible. Complexity, uncertainty and scaling issues of real world problems as well as natural phenomena in ecology, medicine and biology demanding ICT assistance create challenging application domains for artificial intelligence, decision support and intelligence systems, wireless sensor networks, pervasive and ubiquitous computing, multimedia information systems, data management systems, internet and web applications and services, computer networks, security and cryptography, distributed systems, GRID and cloud computing. This book offers a collection of papers presented at the Third International Conference on ICT Innovations held in September 2011, in Skopje, Macedonia. The co...

  18. Exploring IT roles in business process innovation

    DEFF Research Database (Denmark)

    Gong, Jie; Møller, Charles

    2013-01-01

    This paper explores the relationships between IT and Business process innovation (BPI) through examining IT roles in the processes of BPI. BPI is an innovative activity in business which has been paying more attention in recent years. However it is often confused with other process...... the answer to these two questions, the definition of BPI in academia and the relationships with other popular process-orientation activities in practice are reviewed, then a framework of comprehensive understanding of BPI is put forward, and thereafter the interactions between IT and BPI are explored...

  19. Measuring the evolution of the drivers of technological innovation in the patent record.

    Science.gov (United States)

    Buchanan, Andrew; Packard, Norman H; Bedau, Mark A

    2011-01-01

    We argue that technology changes over time by an evolutionary process that is similar in important respects to biological evolution. The process is adaptive in the sense that technologies are selected because of their specific adaptive value and not at random, but this adaptive evolutionary process differs from the Darwinian process of random variation followed by natural selection. We find evidence for the adaptive evolution of technology in the US patent record, specifically, the public bibliographic information of all utility patents issued in the United States from 1976 through 2010. Patents record certain innovations in the evolution of technology. The 1976-2010 patent record is huge, containing almost four million patents. We use a patent's incoming citations to measure its impact on subsequent patented innovations. Weighting innovative impact by the dissimilarity between parent and child technologies reveals that many of the most fecund inventions are door-opening technologies that spawn innovations in widely diverse categories.

  20. Opening up the innovation process: archetypal strategies

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2005-01-01

    The ability to create, retrieve and use knowledge and to be innovative is a strategic asset of immeasurable value. Until recently, most textbooks on business and product development taught that managers should keep their ideas to themselves and protect knowledge from getting into competitors' hands....... Seeking, developing and protecting knowledge is a costly activity. Moreover, apart from being expensive, the process of turning acquired knowledge into useful and well-protected innovations often slows the speed of development. In this paper we examine alternative strategies to innovation, in which...... sharing and co-operation play a critical part. The paper addresses the involvement of users in opening up the innovation process, which in turn gives the participating actors an interesting alternative for product development. We identify and classify four archetypal strategies for opening up...

  1. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  2. Technologically Reflective Individuals as Enablers of Social Innovation.

    Science.gov (United States)

    Schweitzer, Fiona; Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

    2015-11-01

    This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco-challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy-to-administer multi-item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co-creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process.

  3. Technologically Reflective Individuals as Enablers of Social Innovation*

    Science.gov (United States)

    Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

    2015-01-01

    This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco‐challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy‐to‐administer multi‐item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co‐creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process. PMID:27134342

  4. Architectural quality: innovation, technological research and design

    Directory of Open Access Journals (Sweden)

    Andrea Campioli

    2011-04-01

    Full Text Available Architectural redevelopment and the revival of the construction sector are conditional on the incentivisation and bolstering of innovation processes. Thus the partial declensions that have been attached to these processes over the last few years have seen research and experimentation being tailored to the spectacularisation of shapes or the hidden performance optimisation of materials and components. Genuine improvement in the quality of architecture and its construction in this day and age depends on the abilities of designers to adopt the entire life cycle of buildings as a reference framework and on the willingness of all those working in the construction supply chain to activate virtuous cooperation.

  5. Utilities’ Technology Management of Smart Grid Innovation and Implementation

    DEFF Research Database (Denmark)

    Tambo, Torben

    2012-01-01

    companies. Few proven concepts exist, and with the prolongation, smart grid represents an excellent case of technology management. The current study uses a series of loosely related technological studies of smart grid technologies in SME electricity companies to highlight and characterise critical issues....... Major findings are that the companies have limited capabilities in management of technology despite both strong push and pull, and they suffer from vaguely expressed objectives.......To create sustainability in society’s energy system, power producers and consumers need smart grid technology to balance among producing and consuming units. Smart grid makes up a host of specifications, unproven products and concepts as well as a strong and dedicated innovation process for utility...

  6. The Heterogeneity Of Innovation Process In The Brazilian Industry: Analysis From Stylized Facts

    Directory of Open Access Journals (Sweden)

    Ronivaldo Steingraber

    2013-12-01

    Full Text Available This article seeks to analyze the dynamics of innovation in the economy. It analyzes the economic structure and social conditions involved in promoting technological progress and innovations. The economic structure is considered against the requirements of the innovator and the accumulation of capabilities dedicated to innovation. The social conditions are analyzed using the role of institutions in the innovation process. There is increasing effort to develop technological, scientific and innovative in recent years in Brazil, however, this effort is still generating codified and not tacit knowledge, it is centralized in public spending and universities. The private sector participates bit of effort to build national knowledge and depends on foreign technologies to innovate. The data also show a high dispersion of innovation (in product and process ranging sectors (industries, the main Brazilian states and regions and by size of company

  7. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

    Directory of Open Access Journals (Sweden)

    Mahesha M. Poojary

    2016-11-01

    Full Text Available Marine microalgae and seaweeds (microalgae represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield, selectivity (purity, high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

  8. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds.

    Science.gov (United States)

    Poojary, Mahesha M; Barba, Francisco J; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A; Juliano, Pablo

    2016-11-22

    Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

  9. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

    Science.gov (United States)

    Poojary, Mahesha M.; Barba, Francisco J.; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A.; Juliano, Pablo

    2016-01-01

    Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability. PMID:27879659

  10. INFORMATION TECHNOLOGY AS A DETERMINANT OF SMES COLLABORATION AND INNOVATIVENESS

    Directory of Open Access Journals (Sweden)

    Svetlana Cvetanovic

    2014-12-01

    Full Text Available Studies of small and medium-sized enterprise (SMEs development around the world show that the most significant factor for increasing their numbers and improving business success is the free enterprise, as exogenous, and innovation as an endogenous variable. At the same time, the dominant view in economic theory is that innovation is a key generator of changes for which the SMEs can be considered as a kind of metaphors for a successful business over the last twenty years in a number of economies. Arguing that cooperation between SMEs is increasingly common generic strategy of their development, the paper first explains the importance of collaboration to increase innovation and competitiveness, and then provides possible models using information technology such as Workflow Management Systems (WfMS, Service Oriented Architecture (SOA and Service-Oriented Cloud Computing Architecture (SOCCA to support the collaboration of these business entities. Solutions provided are aimed at improving the innovativeness of SMEs and fully follow the requirements of the so-called fifth-generation innovation process whose key attributes are integration and flexibility.

  11. Needs-Based Innovation in Interventional Radiology: The Biodesign Process.

    Science.gov (United States)

    Steinberger, Jonathan D; Denend, Lyn; Azagury, Dan E; Brinton, Todd J; Makower, Josh; Yock, Paul G

    2017-06-01

    There are many possible mechanisms for innovation and bringing new technology into the marketplace. The Stanford Biodesign innovation process is based in a deep understanding of clinical unmet needs as the basis for focused ideation and development. By identifying and vetting a compelling unmet need, the aspiring innovator can "derisk" a project and maximize chances for successful development in an increasingly challenging regulatory and economic environment. As a specialty founded by tinkerers, with a history of disruptive innovation that has yielded countless new ways of delivering care with minimal invasiveness, lower morbidity, and lower cost, interventional radiologists are uniquely well positioned to identify unmet needs and develop novel solutions free of dogmatic convention. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Business process Innovation – The LEGO Case

    DEFF Research Database (Denmark)

    Møller, Charles; Hansen, Poul H. Kyvsgård

    2006-01-01

    process innovation (BPI) in future organizations. This paper explores the applicability of one particular methodology for Business Process Innovation to deal with the challenge that the LEGO organization is facing with the alignment of their product development process and their supply chain. The paper......Most organizations today are required not only to establish effective business processes but they are required to accommodate for changing business conditions at an increasing rate. Many business processes extend beyond the boundary of the enterprise into the supply chain and the information...... infrastructure therefore is critical. Today nearly every business relies on their Enterprise System (ES) for process integration and the future generations of Enterprise Systems will increasingly be driven by business process models. Consequently process modelling and improvement will become vital for business...

  13. Innovativeness In Process Study Relationship Between Organizational Climate & Innovativeness In Process By SEM

    Directory of Open Access Journals (Sweden)

    fatemeh shakeri

    2012-02-01

    Full Text Available In the world of today, most of countries attempt to improve their productivity and economic status by concentrating on innovation. Organizations have considered factors affecting innovation and have achieved enormous competitive advantages. The aim of this research is to investigate the influence of organizational climate in terms of seven dimensions of cohesiveness, autonomy, challenge, resources, openness to innovation, encouragement and supervision on process innovativeness. Data has been collected by random sampling in Khodrocar Lizing company as a subdivision of Iran Khodro Industrial Group. The validity of the conceptual models of each dimension of climate and process innovativeness has been assessed by confirmatory factor analysis (CFA. Results imply the validity of causal relationship between components and the latent variable except for the cohesiveness dimension. Finally, the hypotheses of research have been examined by structural equation modeling (SEM. Findings imply that challenge, resources, openness to innovation, and supervision influence process innovativeness. Supervision has the highest influence and openness to innovation has negative influence on innovativeness, while in prioritizing the factors by the Vikor technique, openness to innovation has the first rank.

  14. Technology Innovation:The Last 1O0 Years and the Future

    Institute of Scientific and Technical Information of China (English)

    Lu Yongxiang

    2001-01-01

    The article gives a general review on the most important achievements of engineering technology in such areas as information technology, materials, microelectronics, optoelectronics, energy, and biological and medical technology. The article also analyzes their social and economic impacts on human beings and the effects on the process of civilization, the driving forces of technology innovation and its necessary social environment, and the roles of scientists, engineers, entrepreneurs and government. The author tries to define the right way and mechanism of technology innovation, in the hope of pushing forward the technology innovation and the industrialization in the new century. The author also predicts the development of engineering technology in the future, which is believed to stir the interest among the publicity and students who care about technology innovation and industrialization.

  15. The impact of innovative commercial technologies on students’ behaviour of an economic university

    Directory of Open Access Journals (Sweden)

    Laurentiu-Dan Anghel

    2015-05-01

    Full Text Available In a dynamic business environment, implementing innovative commercial technologies facilitates the winning of new competitive advantages in the retail industry, given the manifested influence on consumer buying behaviour towards commercial units, as well as the significant contribution to the development of modern shops image. This paper presents the attitude of students from the Bucharest University of Economic Studies towards the adoption of innovative retail technologies within hypermarkets in Romania, based on a selective marketing research, conducted on a sample of 359 students from undergraduate and master cycles. The main objectives focused on identifying: the image of certain instruments belonging to the innovative commercial technologies in terms of usefulness in the process of buying; the intention to use innovative commercial technologies; the perception of the main advantages and disadvantages of using innovative commercial technologies in the buying process; the importance of commercial technologies in relation to other attributes underlying the development of a hypermarket image. Research results show a relatively low level of awareness among buyers, due to a reduced exposure to innovative commercial technologies, but a relatively high availability of acceptance in the purchasing process. Thus, there is a favourable assessment of the utility of commercial instruments in the buying process and a relatively high intention of use. The paper also highlights the influence of innovative commercial technologies on store image and loyalty of buyers.

  16. Innovation Value of Information Technology: Impact of Information Technology--Intensity on Innovation Capability and Firm Performance

    Science.gov (United States)

    Ramamani, Mahesh Kumar

    2010-01-01

    Though information technology adoptions have been always referred to as innovations in firms, much of the business value literature has concentrated on the tangible and immediately measurable impacts of information technology (IT) adoptions. This study aims to explore the impact of information technology investments on the innovativeness of a…

  17. [Innovation and Future Technologies for PET Scanners].

    Science.gov (United States)

    Yamaya, Taiga

    2015-01-01

    Positron emission tomography (PET) plays important roles in cancer diagnosis, neuroimaging and molecular imaging research; but potential points remain for which big improvements could be made, including spatial resolution, sensitivity and manufacturing costs. Higher spatial resolution is essential to enable earlier diagnosis, and improved sensitivity results in reduced radiation exposure and shortened measurement time. Therefore, research on next generation PET technologies remains a hot topic worldwide. In this paper, innovation and future technologies for the next generation PET scanners, such as time-of-flight measurement and simultaneous PET/MRI measurement, are described. Among them, depth-of-interaction (DOI) measurement in the radiation sensor will be a key technology to get any significant improvement in sensitivity while maintaining high spatial resolution. DOI measurement also has a potential to expand PET application fields because it allows for more flexible detector arrangement. As an example, the world's first, open-type PET geometry "OpenPET", which is expected to lead to PET imaging during treatment, is under development. The DOI detector itself continues to evolve with the help of recently developed semiconductor photodetectors, often referred to as silicon photomultipliers.

  18. Exploring IT roles in business process innovation

    DEFF Research Database (Denmark)

    Gong, Jie; Møller, Charles

    2013-01-01

    -orientation concepts, such as Business process management (BPM) and Business process reengineering (BPR). The paper aims to find out two research questions: 1) How do we understand the meanings of BPI in the current background of economic globalization? 2) What IT roles are in the process of BPI? Based on finding......This paper explores the relationships between IT and Business process innovation (BPI) through examining IT roles in the processes of BPI. BPI is an innovative activity in business which has been paying more attention in recent years. However it is often confused with other process...... the answer to these two questions, the definition of BPI in academia and the relationships with other popular process-orientation activities in practice are reviewed, then a framework of comprehensive understanding of BPI is put forward, and thereafter the interactions between IT and BPI are explored...

  19. Innovation as a Nonlinear Process, the Scientometric Perspective, and the Specification of an "Innovation Opportunities Explorer"

    CERN Document Server

    Leydesdorff, Loet; de Nooy, Wouter

    2012-01-01

    The process of innovation follows non-linear patterns across the domains of science, technology, and the economy. Novel bibliometric mapping techniques can be used to investigate and represent distinctive, but complementary perspectives on the innovation process (e.g., "demand" and "supply") as well as the interactions among these perspectives. The perspectives can be represented as "continents" of data related to varying extents over time. For example, the different branches of Medical Subject Headings (MeSH) in the Medline database provide sources of such perspectives (e.g., "Diseases" versus "Drugs and Chemicals"). The multiple-perspective approach enables us to reconstruct facets of the dynamics of innovation, in terms of selection mechanisms shaping localizable trajectories and/or resulting in more globalized regimes. By expanding the data with patents and scholarly publications, we demonstrate the use of this multi-perspective approach in the case of RNA Interference (RNAi). The possibility to develop a...

  20. Innovation Processes as a Stimulant of Internationalisation Process of Firms

    Directory of Open Access Journals (Sweden)

    Małgorzata Kosała

    2015-06-01

    Full Text Available The study focuses on the links between innovation and internationalisation of  the  firm.  The  aim  of  the  research  is  to  determine  the  impact of  innovative processes on the process of internationalisation of the firm. For the needs of the implementation of this study, the available literature of the subject and its constructive critics was used. The  concept  of  innovationinnovation  potential  and  innovativeness  are  discussed,  taking  into  account  the  different  approaches  and  changes  (trends  as  to their  interpretations.  Innovative  activities  in  foreign  markets seem  to  be  a  natural consequence of the innovation processes carried out by  the firm, which is perfectly illustrated by I-models (innovation-related models. Undertaking innovative activity by firms results in the  introduction  of  these  businesses  to  international  markets,  and innovations become the main element of innovation-based internationalisation models as well as international  entrepreneurship models. In  contemporary economic  conditions, innovation processes and business internationalisation processes become increasingly visible  and co-dependent,  creating  a  new  dimension  of entrepreneurship  – international entrepreneurship. The article concentrates on one of three dimensions of international entrepreneurial orientation (IEO, whichis innovativeness. It shows how the  implementation  of  new  ideas  and  new  solutions stimulates  the internationalisation process of the firm, which per seis treated as one of five forms of innovation – entering or opening new markets.

  1. Theoretical and technological building blocks for an innovation accelerator

    Science.gov (United States)

    van Harmelen, F.; Kampis, G.; Börner, K.; van den Besselaar, P.; Schultes, E.; Goble, C.; Groth, P.; Mons, B.; Anderson, S.; Decker, S.; Hayes, C.; Buecheler, T.; Helbing, D.

    2012-11-01

    Modern science is a main driver of technological innovation. The efficiency of the scientific system is of key importance to ensure the competitiveness of a nation or region. However, the scientific system that we use today was devised centuries ago and is inadequate for our current ICT-based society: the peer review system encourages conservatism, journal publications are monolithic and slow, data is often not available to other scientists, and the independent validation of results is limited. The resulting scientific process is hence slow and sloppy. Building on the Innovation Accelerator paper by Helbing and Balietti [1], this paper takes the initial global vision and reviews the theoretical and technological building blocks that can be used for implementing an innovation (in first place: science) accelerator platform driven by re-imagining the science system. The envisioned platform would rest on four pillars: (i) Redesign the incentive scheme to reduce behavior such as conservatism, herding and hyping; (ii) Advance scientific publications by breaking up the monolithic paper unit and introducing other building blocks such as data, tools, experiment workflows, resources; (iii) Use machine readable semantics for publications, debate structures, provenance etc. in order to include the computer as a partner in the scientific process, and (iv) Build an online platform for collaboration, including a network of trust and reputation among the different types of stakeholders in the scientific system: scientists, educators, funding agencies, policy makers, students and industrial innovators among others. Any such improvements to the scientific system must support the entire scientific process (unlike current tools that chop up the scientific process into disconnected pieces), must facilitate and encourage collaboration and interdisciplinarity (again unlike current tools), must facilitate the inclusion of intelligent computing in the scientific process, must facilitate

  2. GRACE BIOREMEDIATION TECHNOLOGIES - DARAMEND™ BIOREMEDIATION TECHNOLOGY. INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Grace Dearborn's DARAMEND™ Bioremediation Technology was developed to treat soils/sediment contaminated with organic contaminants using solid-phase organic amendments. The amendments increase the soil’s ability to supply biologically available water/nutrients to micro...

  3. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    Enterprise Systems Management (ESM) and Business Pro- cess Management (BPM), although highly correlated, have evolved as alternative and mutually exclusive approaches to corporate infrastruc- ture. As a result, companies struggle to nd the right balance between technology and process factors...... in infrastructure implementation projects. The purpose of this paper is articulate a need and a direction to medi- ate between the process-driven and the technology-driven approaches. Using a cross-case analysis, we gain insight into two examples of sys- tems and process implementation. We highlight the dierences...... between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...

  4. Purchasing medical innovation the right technology, for the right patient, at the right price

    CERN Document Server

    Robinson, James C

    2015-01-01

    Innovation in medical technology generates a remarkable supply of new drugs, devices, and diagnostics that improve health, reduce risks, and extend life. But these technologies are too often used on the wrong patient, in the wrong setting, or at an unaffordable price. The only way to moderate the growth in health care costs without undermining the dynamic of medical innovation is to improve the process of assessing, pricing, prescribing, and using new technologies. Purchasing Medical Innovation analyzes the contemporary revolution in the purchasing of health care technology, with a focus on th

  5. Advanced Manufacturing Technologies and Green Innovation: The Role of Internal Environmental Collaboration

    Directory of Open Access Journals (Sweden)

    Ting Kong

    2016-10-01

    Full Text Available Green innovation has been deemed a key corporate capability to deal with environmental issues. The usage of advanced manufacturing technologies (AMT provides important resources and knowledge for firms’ green innovation. Drawing on a resources-based approach, this study contributes to the existing literature by examining how the adoption of specific types of AMT (process, design, and planning influences two dimensions of green innovation (green product innovation and green process innovation. In particular, we explore these relationships through internal environmental collaboration. Based on data collected from 198 Chinese manufacturing firms, we found that process, design, and planning AMT can contribute to both green products and process innovation. Moreover, the findings confirm the significant mediating role of internal environmental collaboration in this relationship. Specifically, internal environmental collaboration mediates the relationship between process AMT and green product innovation as well as the relationship between design AMT and two dimensions of green innovation; it also partially mediates the relationship between process AMT and green process innovation as well as the relationship between planning AMT and two dimensions of green innovation. These findings provide novel insights into how manufacturing firms can use various types of AMT to enhance their green innovation.

  6. Technology and innovation: 2010 a year in review.

    Science.gov (United States)

    Sanberg, Paul R; Vindrola-Padros, Cecilia; Eve, David J; Federoff, Howard J

    2011-01-01

    The following commentary provides a discussion of the articles published in Technology and Innovation in 2010 and where possible places them into context with those reported in Cell Transplantation. These articles can be divided into the following topics: a) models for innovation and technological commercialization, b) the ethical and legal consequences of the emergence of new technologies, c) research on novel technologies and methods, and d) the difficulties involved in peer review and scientific assessment. The articles shed light on the effects of technological innovation and commercialization on scientific ethical regulation, the establishment of legal standards for the protection of intellectual property, and the development of financial models.

  7. Technology Road Mapping for Innovation Pathways of Fibrates: A ...

    African Journals Online (AJOL)

    Technology Road Mapping for Innovation Pathways of Fibrates: A ... Purpose: To examine international technology development of fibrates ... It will aid researchers, entrepreneurs, investors and policymakers to identify foci for fibrate research ...

  8. Dietary assessment in Africa: Integration with innovative technology ...

    African Journals Online (AJOL)

    Dietary assessment in Africa: Integration with innovative technology. ... African Journal of Food, Agriculture, Nutrition and Development ... an opportunity for exploring the benefits and general acceptance of using technology to improve health.

  9. A Comparative Assessment of Wind Turbine Innovation and Diffusion Policies. Historical Case Studies of Energy Technology Innovation

    DEFF Research Database (Denmark)

    Neij, Lena; Andersen, Per Dannemand

    2012-01-01

    path of the 1980s. The third stage is the emerging markets of the 1990s and 2000s, including countries such as India and China. Within these different stages, common elements in government policy strategies can be identified as essential for a sustainable and successful innovation process. These can......Wind turbines have become a mainstream technology, a first choice for many when investing in new electricity generation facilities. This comparative case study addresses how governmental policy has been formulated to support the wind turbine innovation and diffusion process. Three innovation stages...... and corresponding innovation strategies are identified. The first stage is the early movers of the 1970s and early 1980s, including pioneer countries such as Denmark, the United States, Germany, and the Netherlands. The second stage is the booming markets of the 1990s, guided by the successful Danish innovation...

  10. From translational research to open technology innovation systems.

    Science.gov (United States)

    Savory, Clive; Fortune, Joyce

    2015-01-01

    The purpose of this paper is to question whether the emphasis placed within translational research on a linear model of innovation provides the most effective model for managing health technology innovation. Several alternative perspectives are presented that have potential to enhance the existing model of translational research. A case study is presented of innovation of a clinical decision support system. The paper concludes from the case study that an extending the triple helix model of technology transfer, to one based on a quadruple helix, present a basis for improving the performance translational research. A case study approach is used to help understand development of an innovative technology within a teaching hospital. The case is then used to develop and refine a model of the health technology innovation system. The paper concludes from the case study that existing models of translational research could be refined further through the development of a quadruple helix model of heath technology innovation that encompasses greater emphasis on user-led and open innovation perspectives. The paper presents several implications for future research based on the need to enhance the model of health technology innovation used to guide policy and practice. The quadruple helix model of innovation that is proposed can potentially guide alterations to the existing model of translational research in the healthcare sector. Several suggestions are made for how innovation activity can be better supported at both a policy and operational level. This paper presents a synthesis of the innovation literature applied to a theoretically important case of open innovation in the UK National Health Service. It draws in perspectives from other industrial sectors and applies them specifically to the management and organisation of innovation activities around health technology and the services in which they are embedded.

  11. Technological progress as a driver of innovation in infant foods.

    Science.gov (United States)

    Ferruzzi, Mario G; Neilson, Andrew P

    2010-01-01

    Advances in nutrition and food sciences are interrelated components of the innovative framework for infant formula and foods. While nutrition science continues to define the composition and functionality of human milk as a reference, food ingredient, formulation and processing technologies facilitate the design and delivery of nutritional and functional concepts to infant products. Expanding knowledge of both nutritive and non-nutritive components of human milk and their functionality guides selection and development of novel ingredient, formulation and processing methods to generate enhanced infant products targeting benefits including healthy growth, development as well as protection of health through the life cycle. In this chapter, identification and application of select novel ingredients/technologies will be discussed in the context of how these technological advancements have stimulated innovation in infant foods. Special focus will be given to advancements in protein technologies, as well as bioactive long-chain polyunsaturated fatty acids, prebiotics, probiotics that have allowed infant formula composition, and more critically functionality, to more closely align with that of human milk.

  12. The Effects of Firm' s Learning Processes on Innovation Performance in Technology Alliance%技术联盟中企业学习对创新绩效的影响研究

    Institute of Scientific and Technical Information of China (English)

    付敬; 朱桂龙

    2013-01-01

    基于活动理论框架,提出一个联盟企业学习过程、潜在吸收能力与其创新绩效关系的研究模型.实证结果表明,联盟中企业“投入中学”只对企业突破性创新起到显著影响,而与渐进性创新无直接相关性;非正式交流的“从他人学”与潜在吸收能力正相关;与不同类型伙伴正式合作研发的“干中学”过程对于企业创新绩效的影响路径与作用效果有显著差异;“产学研合作研发中学”对企业渐进性创新的正向影响被其潜在吸收能力完全中介,而对突破性创新起到显著的直接促进作用;“产业内合作研发中学”正向影响企业创新绩效.%Based on activity theory frameworks, this paper proposes a research model about the relationships among learning processes, potential absorptive capacity ( PAC) and innovation performance in technology alliance. The results find that learning - by - investment improves firm' s radical innovation performance directly instead of incremental one. Learning - from - others is positively related to PAC. Furthermore, two kinds of learning - by - doing have different impacts on radical and incremental innovation performance respectively. Learning form universities is positively related to radical innovation but its effect on incremental innovation is completely mediated by PAC, Learning from industry - chain partners improves innovation performance.

  13. 浅谈科技创新在粮油加工中的作用和地位%Preliminary Discussion on Role and Status of Science and Technology Innovation in Grain and Oil Processing

    Institute of Scientific and Technical Information of China (English)

    陶海腾; 王文亮; 徐同成; 刘丽娜; 祝清俊; 杜方岭

    2012-01-01

    Grain and oil processing plays an important part in agricultural products processing, and is facing new opportunities and challenges along with the economic development. Science and technology innovation is the important support and fundamental guarantee for grain and oil processing keeping pace with the times. In terms of product quality, deep processing, resource utilization and strategic process ing layout, the important role and status of science and technology innovation were described to provide theoretical basis for subsequent in dustry development.%粮油加工是农产品加工的重要组成部分,随着经济的发展面临着新的机遇与挑战。科技创新是促进粮油加工与时俱进的重要支撑和根本保障。本文从产品品质、精深加工、资源综合利用、加工战略布局等方面,阐述了科技创新在粮油加工发展中的重要作用和地位。

  14. Venture Leaders Prize for innovative technology projects

    CERN Multimedia

    2006-01-01

    In co-operation with the GEBERT RÜF FOUNDATION and the Ernest & Young Entrepreneur of the Year Award, venturelab will be presenting the Venture Leaders Prize. The Venture Leaders Prize, which is the new guise of the NETS (New Entrepreneurs in Technology and Science) Prize, will give twenty research entrepreneurs with projects to develop innovative technologies the opportunity to win the chance of participating in a programme to assist them in starting up their companies. The winners will go to spend 10 days in the Boston area (United States) where they will take part in a development programme for their project, which will include an entrepreneurship course, opportunities to meet start-up companies and financing experts, etc. This prize has already spawned many companies such as id Quantique, Selexis or ABMI which have contributed to the economic development of regions, particularly in French-speaking Switzerland. The competition is open to students and scientists from all fields, who would like to s...

  15. Standardising Software Processes - An Obstacle for Innovation?

    DEFF Research Database (Denmark)

    Aaen, Ivan; Pries-Heje, Jan

    2004-01-01

    Over the last 10 years CMM has achieved widespread use as a model for improving software organisations. Often CMM is used to standardise software processes across projects. In this paper we discuss this standardisation of SPI in relation to innovation, organisational size and company growth. Our...

  16. Public Leadership and processes of societal innovations

    NARCIS (Netherlands)

    Termeer, C.J.A.M.

    2007-01-01

    Societal actors can come against problems that cross the traditional boundaries of sectors, organisations and routines. Processes of societal innovation are started on the way to an unknown future, creating new solutions and new corporations. In this paper I focus on the question how public leaders

  17. Opening up the innovation process: archetypal strategies

    DEFF Research Database (Denmark)

    Vujovic, Sladjana; Ulhøi, John Parm

    2005-01-01

    sharing and co-operation play a critical part. The paper addresses the involvement of users in opening up the innovation process, which in turn gives the participating actors an interesting alternative for product development. We identify and classify four archetypal strategies for opening up...

  18. 40 CFR 60.398 - Innovative technology waivers.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Innovative technology waivers. 60.398 Section 60.398 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... Light Duty Truck Surface Coating Operations § 60.398 Innovative technology waivers. (a) General Motors...

  19. Cyber Portfolio: The Innovative Menu for 21st Century Technology

    Science.gov (United States)

    Robles, Ava Clare Marie O.

    2012-01-01

    Cyber portfolio is a valuable innovative menu for teachers who seek out strategies or methods to integrate technology into their lessons. This paper presents a straightforward preparation on how to innovate a menu that addresses the 21st century skills blended with higher order thinking skills, multiple intelligence, technology and multimedia.…

  20. Technological Innovation and Cooperation for Foreign Information Access Program

    Science.gov (United States)

    Office of Postsecondary Education, US Department of Education, 2012

    2012-01-01

    The Technological Innovation and Cooperation for Foreign Information Access (TICFIA) Program supports projects focused on developing innovative technologies for accessing, collecting, organizing, preserving, and disseminating information from foreign sources to address the U.S.' teaching and research needs in international education and foreign…

  1. Does Your Department Have a Technology Innovation Strategy?

    Science.gov (United States)

    Felkey, Bill G; Fox, Brent I

    2016-11-01

    There are ways to facilitate the successful implementation of technological innovations. These are especially important in a time of rapid development of new tools to support safe and effective medication therapy. This installment addresses some of the key components of a successful technology innovation strategy.

  2. Teaching Innovation in High School Technology Classes

    Science.gov (United States)

    Wright, Geoffrey A.; Skaggs, Paul; West, Richard E.

    2013-01-01

    Innovation is central to modern industry. It can and should be taught in schools. Not only does providing students a background in innovation benefit them later in life and industry, but it also promotes and further develops their critical thinking and collaboration skills. Despite the need for innovation, many have struggled with how to teach it.…

  3. Teaching Innovation in High School Technology Classes

    Science.gov (United States)

    Wright, Geoffrey A.; Skaggs, Paul; West, Richard E.

    2013-01-01

    Innovation is central to modern industry. It can and should be taught in schools. Not only does providing students a background in innovation benefit them later in life and industry, but it also promotes and further develops their critical thinking and collaboration skills. Despite the need for innovation, many have struggled with how to teach it.…

  4. Spaces of the possible: universal Darwinism and the wall between technological and biological innovation.

    Science.gov (United States)

    Wagner, Andreas; Rosen, William

    2014-08-01

    Innovations in biological evolution and in technology have many common features. Some of them involve similar processes, such as trial and error and horizontal information transfer. Others describe analogous outcomes such as multiple independent origins of similar innovations. Yet others display similar temporal patterns such as episodic bursts of change separated by periods of stasis. We review nine such commonalities, and propose that the mathematical concept of a space of innovations, discoveries or designs can help explain them. This concept can also help demolish a persistent conceptual wall between technological and biological innovation.

  5. Spaces of the possible: universal Darwinism and the wall between technological and biological innovation

    Science.gov (United States)

    Wagner, Andreas; Rosen, William

    2014-01-01

    Innovations in biological evolution and in technology have many common features. Some of them involve similar processes, such as trial and error and horizontal information transfer. Others describe analogous outcomes such as multiple independent origins of similar innovations. Yet others display similar temporal patterns such as episodic bursts of change separated by periods of stasis. We review nine such commonalities, and propose that the mathematical concept of a space of innovations, discoveries or designs can help explain them. This concept can also help demolish a persistent conceptual wall between technological and biological innovation. PMID:24850903

  6. Significant factors in the technological profile of innovative companies in the return of capital in technological innovation

    Directory of Open Access Journals (Sweden)

    Eloisa de Moura Lopes

    2013-12-01

    Full Text Available  Aim to analyze the significance of factors of technological profile in innovative companies that contribute to the return of capital in innovation (ROEI. The method used was design of experiments, by the structure of non-balanced factorial design. The field research was done with seventy companies. The main return of the capital applied in innovation, should support the open innovation system, and exclusively systematic studies of ideas for new products.  

  7. Photon technology. Laser process technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For developing laser process technology by interaction between substance and photon, the present state, system, R and D issues and proposal of such technology were summarized. Development of the photon technology aims at the modification of bonding conditions of substances by quantum energy of photon, and the new process technology for generating ultra- high temperature and pressure fields by concentrating photon on a minute region. Photon technology contributes to not only the conventional mechanical and thermal forming and removal machining but also function added machining (photon machining) in quantum level and new machining technology ranging from macro- to micro-machining, creating a new industrial field. This technology extends various fields from the basis of physics and chemistry to new bonding technology. Development of a compact high-quality high-power high-efficiency photon source, and advanced photon transmission technology are necessary. The basic explication of an unsolved physicochemical phenomenon related to photon and substance, and development of related application technologies are essential. 328 refs., 147 figs., 13 tabs.

  8. Fatores de Influência no Processo de Inovação em Empresas de Base Tecnológica = Influence Factors in the Innovation Process Technology Based Companies

    Directory of Open Access Journals (Sweden)

    Aléssio Bessa Sarquis

    2015-12-01

    Full Text Available A inovação é uma estratégia fundamental no setor de base tecnológica. O processo de gestão é influenciado por diferentes fatores do ambiente interno e externo da organização. Assim, o presente estudo buscou analisar os fatores de influência no processo de inovação nas empresas de base tecnológica do Polo Tecnológico de Florianópolis/SC. A coleta de dados primários envolveu a aplicação de pesquisa quantitativa, descritiva não conclusiva, na forma de levantamento de campo (survey, de corte transversal, em 96 empresas de base tecnológica, por meio de questionário autoadministrado e pré-testado. Os resultados apontaram como principais fatores de influência os seguintes: disponibilidade de recursos financeiros/tecnológicos externos; apoio de governo, agências de fomento e associações empresariais; participação de clientes e técnicos externos (fatores do ambiente externo; existência de processo de inovação estruturado; disponibilidade de recursos internos; cultura organizacional favorável à inovação (fatores do ambiente interno.Innovation is a key strategy in technology-based industry, and the management process influenced by different factors of the internal and external environment of the organization. The present study investigates the influence of factors in the innovation process in technology-based companies in the Technological Pole of Florianópolis/SC. The primary data collection involved the application of quantitative research, no conclusive descriptive, in the form of survey, cross-sectional in 96 technology-based companies, through self-administered questionnaire and pre-tested. The results showed the following main influencing factors: availability of financial resources and external technology; support of government, development agencies and business associations; participation of customers and external experts (the external environment factors; existence of structured innovation process

  9. Technologies for Optical Processing

    DEFF Research Database (Denmark)

    Stubkjær, Kristian

    2008-01-01

    The article consists of a Powerpoint presentation on technologies for optical processing. The paper concludes that the nonlinear elements based on SOA, fibers and waveguide structures have capabilities of simple processing at data rates of 100-600 Gb/s. Switching powers comparable to electronics...

  10. Capabilities of technological innovation in companies involved in the defense industry; Capacidades de innovacion tecnologia en empresas relacionadas con la industria de defensa

    Energy Technology Data Exchange (ETDEWEB)

    Briones Penalver, A. J.; Laborda Penalver, F.

    2010-07-01

    This paper studies the capacities related with the innovation types, the technological development, the role of the innovation systems and the institutional aspects. It presents a study of 236 small and medium-sized companies which comprise the defence industry. It examines the innovation strategy and defines the most important factors of technological innovation processes (measures, values and results of innovation). It analyses statistically the causal relationship between strategy and structure, the role of innovation in cooperation and inter company relationships and the dependence relationship in technological innovation capacities of several variables in the innovation processes in these companies. (Author) 65 refs.

  11. Concept Relation Discovery and Innovation Enabling Technology (CORDIET)

    CERN Document Server

    Poelmans, Jonas; Neznanov, Alexey; Viaene, Stijn; Kuznetsov, Sergei O; Ignatov, Dmitry; Dedene, Guido

    2012-01-01

    Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self Organizing Maps (ESOM) and Hidden Markov Models (HMM) as main artifacts in the analysis process. The user can define temporal, text mining and compound attributes. The text mining attributes are used to analyze the unstructured text in documents, the temporal attributes use these document's timestamps for analysis. The compound attributes are XML rules based on text mining and temporal attributes. The user can cluster objects with object-cluster rules and can chop the data in pieces with segmentation rules. The artifacts are optimized for efficient data analysis; object labels in the FCA lattice and ESOM map contain an URL on which the user can click to open the selected document.

  12. Technology innovation and management in the US Bureau of the Census: Discussion and recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B.; Edwards, R.; Goeltz, R.; Hake, K.

    1990-09-01

    This report contains a set of recommendations prepared by Oak Ridge National Laboratory (ORNL) for the US Bureau of the Census pertaining to technology innovation and management. Technology has the potential to benefit the Bureau's data collection, capture, processing, and analysis activities. The entire Bureau was represented from Decennial Census to Economic Programs and various levels of Bureau management and numerous experts in technology. Throughout the Bureau, workstations, minicomputers, and microcomputers have found their place along side the Bureau's mainframes. The Bureau's new computer file structure called the Topologically Integrated Geographic Encoding and Referencing data base (TIGER) represents a major innovation in geographic information systems and impressive progress has been made with Computer Assisted Telephone Interviewing (CATI). Other innovations, such as SPRING, which aims to provide Bureau demographic analysts with the capability of interactive data analysis on minicomputers, are in the initial stages of development. Recommendations fall into five independent, but mutually beneficial categories. (1) The ADP Steering Committee be disbanded and replaced with The Technology Forum. (2) Establishment of a Technology Review Committee (TRC), to be composed of technology experts from outside the Bureau. (3) Designate technological gurus. These individuals will be the Bureau's experts in new and innovative technologies. (4) Adopt a technology innovation process. (5) Establish an Advanced Technology Studies Staff (ATSS) to promote technology transfer, obtain funding for technological innovation, manage innovation projects unable to find a home in other divisions, evaluate innovations that cut across Bureau organizational boundaries, and provide input into Bureau technology analyses. (JF)

  13. Negotiating sustainable innovation? Hydrogen and fuel cell technologies in Germany

    Directory of Open Access Journals (Sweden)

    Weert Canzler

    2013-06-01

    Full Text Available Recently, the German Federal Government made the consequential decision to change its energy program. This not only as a result of the decision to shut down the existing nuclear power plants within the next few years, but also due to vital challenges like climate change and security of energy supply. The shift in the energy-technology paradigm from fossil fuel technologies to regenerative energies might appear as a merely technical process at first glance. Yet, the road to environmental sustainability is paved with economic and social stumbling blocks. The concept of sustainable development is not a blueprint for technical progress but requires deliberations on questions about innovations and governance: How do we want to live and how do we want to get there? This paper traces the negotiations of sustainable innovation on the example of hydrogen and fuel cell technologies in Germany. The institutional set up in this field is analyzed and the new organizational actors are identified. These actors attempt to inform and persuade others of the benefits of hydrogen and fuel cells in order to establish a common view that is to guide the further development. However, while they succeeded in mobilizing enough actors to launch the largest Public Private Partnership in this sector in the EU, they could not attain the leadership in the public discourse on these technologies. It seems that an attractive guiding vision of a sustainable, post-fossil energy future and a broad acceptance in daily use would have been major prerequisites for such leadership.

  14. A model for technology assessment and commercialization for innovative disruptive technologies

    Energy Technology Data Exchange (ETDEWEB)

    KASSICIEH, SULEIMAN K.; WALSH, STEVE; MCWHORTER,PAUL J.; CUMMINGS JR.,JOHN C.; WILLIAMS,W. DAVID; ROMIG JR.,ALTON D.

    2000-05-17

    Disruptive technologies are scientific discoveries that break through the usual product technology capabilities and provide a basis for a new competitive paradigm as described by Anderson and Tushman [1990], Tushman and Rosenkopf [1992], and Bower and Christensen [1995]. Discontinuous innovations are products/processes/services that provide exponential improvements in the value received by the customer much in the same vein as Walsh [1996], Lynn, Morone and Paulson [1996], and Veryzer [1998]. For more on definitions of disruptive technologies and discontinuous innovations, see Walsh and Linton [1999] who provide a number of definitions for disruptive technologies and discontinuous innovations. Disruptive technologies and discontinuous innovations present a unique challenge and opportunity for R and D organizations seeking to build their commercialization efforts and to reinvent the corporation. These technologies do not have a proven path from scientific discovery to mass production and therefore require novel approaches. These critically important technologies are the wellspring of wealth creation and new competency generation but are not readily accepted by the corporate community. They are alternatively embraced and eschewed by the commercial community. They are finally accepted when the technology has already affected the industry or when the technological horse has already flown out of the hanger. Many firms, especially larger firms, seem reluctant to familiarize themselves with these technologies quickly. The trend seems to be that these firms prefer to react to a proven disruptive technology that has changed the product market paradigm. If true, then there is cause for concern. This paper will review the literature on disruptive technologies presenting a model of the progression from scientific idea to mass production for disruptive technologies contrasted to the more copious incremental technologies. The paper will then describe Sandia National Laboratories

  15. Business cycle and innovation activity in medium-high and high technology industry in Poland

    Directory of Open Access Journals (Sweden)

    Dzikowski Piotr

    2015-12-01

    Full Text Available This article examines differences in an impact of business cycle phases on innovation activity in medium-high and high technology industry in Poland. It is assumed that each business cycle phase influences innovation activity in the same fashion, but its impact varies and it depends on the firm’s innovation activity. The higher innovation activity the less impact of business cycle. The scope of the survey relates to innovation in MHT and HT industry in Poland. The data concerns the innovation at the firm level and the diffusion “new for the company”. Innovation activity is defined by the following activities: (1 expenditure on research and development and investments in fixed assets not used so far such as: abuildings, premises and land; b machinery and equipment, c computer software; (2 implementation of new products and technological processes and (3 innovation cooperation. The methodological part of the analysis includes a logit modeling. The survey includes 1355 companies. Business cycle has a great influence on innovation activity in MTH and HT industry in Poland. The influence of recovery phase is positive whereas both stagnation and recession phases decrease the probability of innovation activity. The character of influence depends on the propensity to take innovation activity. The higher level of innovation activity the enterprises present the less influence of business cycle they get.

  16. Particle processing technology

    Science.gov (United States)

    Yoshio, Sakka

    2014-02-01

    In recent years, there has been strong demand for the development of novel devices and equipment that support advanced industries including IT/semiconductors, the environment, energy and aerospace along with the achievement of higher efficiency and reduced environmental impact. Many studies have been conducted on the fabrication of innovative inorganic materials with novel individual properties and/or multifunctional properties including electrical, dielectric, thermal, optical, chemical and mechanical properties through the development of particle processing. The fundamental technologies that are key to realizing such materials are (i) the synthesis of nanoparticles with uniform composition and controlled crystallite size, (ii) the arrangement/assembly and controlled dispersion of nanoparticles with controlled particle size, (iii) the precise structural control at all levels from micrometer to nanometer order and (iv) the nanostructural design based on theoretical/experimental studies of the correlation between the local structure and the functions of interest. In particular, it is now understood that the application of an external stimulus, such as magnetic energy, electrical energy and/or stress, to a reaction field is effective in realizing advanced particle processing [1-3]. This special issue comprises 12 papers including three review papers. Among them, seven papers are concerned with phosphor particles, such as silicon, metals, Si3N4-related nitrides, rare-earth oxides, garnet oxides, rare-earth sulfur oxides and rare-earth hydroxides. In these papers, the effects of particle size, morphology, dispersion, surface states, dopant concentration and other factors on the optical properties of phosphor particles and their applications are discussed. These nanoparticles are classified as zero-dimensional materials. Carbon nanotubes (CNT) and graphene are well-known one-dimensional (1D) and two-dimensional (2D) materials, respectively. This special issue also

  17. Opening up the Agile Innovation Process

    Science.gov (United States)

    Conboy, Kieran; Donnellan, Brian; Morgan, Lorraine; Wang, Xiaofeng

    The objective of this panel is to discuss how firms can operate both an open and agile innovation process. In an era of unprecedented changes, companies need to be open and agile in order to adapt rapidly and maximize their innovation processes. Proponents of agile methods claim that one of the main distinctions between agile methods and their traditional bureaucratic counterparts is their drive toward creativity and innovation. However, agile methods are rarely adopted in their textbook, "vanilla" format, and are usually adopted in part or are tailored or modified to suit the organization. While we are aware that this happens, there is still limited understanding of what is actually happening in practice. Using innovation adoption theory, this panel will discuss the issues and challenges surrounding the successful adoption of agile practices. In addition, this panel will report on the obstacles and benefits reported by over 20 industrial partners engaged in a pan-European research project into agile practices between 2006 and 2009.

  18. THE APPLICATION OF FORESIGHT PROJECTS IN FORMATION OF TECHNOLOGICAL COMPANIES’ INNOVATION DEVELOPMENT STRATEGY

    Directory of Open Access Journals (Sweden)

    M. E. Zolotareva

    2016-01-01

    Full Text Available In the article is considered the possibility of application of methodology of foresight to the formation of strategy of innovative development of technological companies. The application of existing approaches to defining targets and goals of innovation development does not meet the requirements of the nonlinearity of the modern processes of technological companies’ innovation development.The goals and objectives. The purpose of this article is to study the possibilities of application of methods of foresight in forming of technological companies’ innovation development strategy. To achieve the goal, the author has solved the following problems: considered the interrelationship and interdependence between corporate strategy and technological companies’ innovation development strategy; defined the main problems of formation technological companies’ innovation development strategies; revealed the concept of "foresight" and diff erence in methodology of foresight and traditional forecasting techniques; defined the basic principles of foresight; presents the main stages of the foresight project implementation in technological companies.Research methods. The theoretical basis of the study are the publications of Russian and foreign scientists in the field of formation and development of innovation strategies through the application of foresight methods at the level of national innovation system and at company level. As a methodological basis of the study used methods of analysis, synthesis, induction method, deduction method, the comparison, was applied certain aspects of the synergetic analysis.Summary. The results of Russian and foreign researchers systematized by author confirm the possibility and necessity foresight projects implementation in formation and adjustment of technological companies’ innovation development strategies and in the national innovation system development. The principles of engagement of various social forces

  19. MODERN INNOVATIVE PEDAGOGICAL TECHNOLOGY FOR PROFILE SCHOOL CHEMISTRY LESSONS

    Directory of Open Access Journals (Sweden)

    Maria D. Tukalo

    2011-10-01

    Full Text Available The article gives a characteristic of modern innovative pedagogical technologies with methods of their use in chemistry lessons at school it reveals their importance in the learning process to optimize the learning and the knowledge and skills to apply them to solve specific problems of scientific opinion, enhance the creative activity of transition cognitive motivation of the professional through the establishment of conditions for development of the creative potential of students using computer-oriented learning means within a modern educational system in order to fulfill the basic educational goals: developing, information, mobilization, communication, research.

  20. EMBRACING GREEN TECHNOLOGY INNOVATION THROUGH STRATEGIC HUMAN RESOURCE MANAGEMENT: A CASE OF AN AUTOMOTIVE COMPANY

    Directory of Open Access Journals (Sweden)

    Reihaneh Montazeri Shatouri

    2013-01-01

    Full Text Available What makes a technological innovation successful for an industry? This study examines how green technology innovation is impacted by strategic management of the human resource in firms. The value of this study lies in its intention to explain the needs to effectively blend people matters first before endeavouring technologies. We focus on Malaysia’s leading automobile manufacturer, Proton which currently embarks on smart green initiatives in its product development. The quantitative survey identifies potential challenges of Proton’s human resource management that may infringe green technology process. Our findings confirm the effects of strategic human resource management system on adopting the green technology innovation. The most important factors affecting the implementation of green technology include knowledge application, team development, knowledge sharing, performance-based reward and training of before and during the process of embracing the new technology.

  1. Innovation and communicative action: health management networks and technologies.

    Science.gov (United States)

    Rivera, Francisco Javier Uribe; Artmann, Elizabeth

    2016-11-03

    This article discusses elements of a theory of innovation from the perspective of innovation networks and social construction of technology, based on Habermas' Theory of Communicative Action and authors from the Sociology of Innovation. Based on the theoretical framework of the communicative production of scientific facts, we focus on innovation management as a basic dimension that must meet some organizational and methodological requirements in order to power its results. We present and discuss instruments such as Situational Planning, Prospective Analysis, Strategic Portfolio Management, and Networks Management that can help deal with the challenge of innovation and exploration of the future. We conclude that network organizational formats centered on reflexivity of interdisciplinary groups and planning approaches that encourage innovation criteria in assessing the attractiveness of activities and that help anticipate forms of innovation through systematic prospective analysis can potentiate the process of generating innovation as a product of networks. Resumo: No artigo são discutidos elementos de uma teoria da inovação numa perspectiva de redes de inovação e de construção social da tecnologia, a partir da Teoria do Agir Comunicativo de Habermas e de autores da Sociologia da Inovação. Com base no marco teórico da produção comunicativa de fatos científicos, focamos a gestão da inovação como uma dimensão fundamental que deve contemplar alguns requisitos, tanto de natureza organizacional quanto metodológica, para potencializar seus resultados. Apresentamos e discutimos instrumentos como o Planejamento Situacional, a Análise Prospectiva, a Gestão Estratégica de Portfólios e a Gestão de Redes que podem contribuir para o desafio da inovação e exploração do futuro. Conclui-se que formas organizativas em rede, centradas na reflexividade de grupos interdisciplinares, e enfoques de planejamento que estimulem o uso de critérios de inovação na

  2. Finding Space for Student Innovative Practices with Technology in the Classroom

    Science.gov (United States)

    Hillman, Thomas

    2014-01-01

    This article examines the role students play in shaping the nature of the technologies they use in their classrooms and the role teachers play in supporting students' innovative practices. Drawing on research on the sociology of technological development from the field of Science and Technology Studies, the process by which one student's…

  3. Innovate or Die: Innovation and Technology for Special Operations

    Science.gov (United States)

    2010-12-01

    voluminous case studies spanning defense and commercial innova - tion success is that breakthrough capabilities often emerge not from the original...instructive example of the role of individuals in institutional innovation in “Adaptors and Innova - tors: Why New Initiatives Get Blocked.” 40 Kirton places...immeasurably cost effective in the long run. David Stirling’s creation of the SAS is an almost literal example of innova - tion as a contact sport. While in

  4. 2nd Symposium on applied nuclear physics and innovative technologies

    CERN Document Server

    2014-01-01

    Symposium on Applied Nuclear Physics and Innovative Technologies will be held for the second time at Collegium Maius, the oldest building of the Jagiellonian University in Cracow, the same building where Nicolaus Copernicus has studied astronomy. Symposium is organized in the framework of the MPD programme carried out by the Foundation for Polish science based on the European Structural Funds. The aim of this conference is to gather together young scientists and experts in the field of applied and fundamental nuclear as well as particle physics. Aiming at interplay of fundamental and applied science the conference will be devoted to the following topics: * Medical imaging and radiotherapy * New materials and technologies in radiation detection * Fission, fusion and spallation processes * High-performance signal processing and data analysis * Tests of foundations of physics and search for a new kind of sub-atomic matter

  5. Innovation under Regulatory Uncertainty: Evidence from Medical Technology.

    Science.gov (United States)

    Stern, Ariel Dora

    2017-01-01

    This paper explores how the regulatory approval process affects innovation incentives in medical technologies. Prior studies have found early mover regulatory advantages for drugs. I find the opposite for medical devices, where pioneer entrants spend 34 percent (7.2 months) longer than follow-on entrants in regulatory approval. Back-of-the- envelope calculations suggest that the cost of a delay of this length is upwards of 7 percent of the total cost of bringing a new high-risk device to market. Considering potential explanations, I find that approval times are largely unrelated to technological novelty, but are meaningfully reduced by the publication of objective regulatory guidelines. Finally, I consider how the regulatory process affects small firms' market entry patterns and find that small firms are less likely to be pioneers in new device markets, a fact consistent with relatively higher costs of doing so for more financially constrained firms.

  6. Elucidate Innovation Performance of Technology-driven Mergers and Acquisitions

    Energy Technology Data Exchange (ETDEWEB)

    Huang, L.; Wang, K.; Yu, H.; Shang, L.; Mitkova, L.

    2016-07-01

    The importance and value of Mergers and Acquisitions (M&As) have increased with the expectancy to obtain key technology capabilities and rapid impact on innovation. This article develops an original analytical framework to elucidate the impact of the technology and product relatedness (similarity/complementarity) of the Technology-driven M&A’ partners on post-innovation performance. We present results drawing on a multiple case studies of Chinese High-Tech firms from three industries. (Author)

  7. Sources of Information as Determinants of Product and Process Innovation.

    Science.gov (United States)

    Gómez, Jaime; Salazar, Idana; Vargas, Pilar

    2016-01-01

    In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities) to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process) considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent.

  8. Sources of Information as Determinants of Product and Process Innovation

    Science.gov (United States)

    2016-01-01

    In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities) to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process) considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent. PMID:27035456

  9. Sources of Information as Determinants of Product and Process Innovation.

    Directory of Open Access Journals (Sweden)

    Jaime Gómez

    Full Text Available In this paper we use a panel of manufacturing firms in Spain to examine the extent to which they use internal and external sources of information (customers, suppliers, competitors, consultants and universities to generate product and process innovation. Our results show that, although internal sources are influential, external sources of information are key to achieve innovation performance. These results are in line with the open innovation literature because they show that firms that are opening up their innovation process and that use different information sources have a greater capacity to generate innovations. We also find that the importance of external sources of information varies depending on the type of innovation (product or process considered. To generate process innovation, firms mainly rely on suppliers while, to generate product innovation, the main contribution is from customers. The potential simultaneity between product and process innovation is also taken into consideration. We find that the generation of both types of innovation is not independent.

  10. The Mediating Role of Knowledge Sharing on Information Technology and Innovation

    Directory of Open Access Journals (Sweden)

    Onwika Kaewchur

    2013-12-01

    Full Text Available This study aims to investigate the relationship between information technology, knowledge sharing, and a firm’s innovation. Knowledge sharing as a mediating effect is also simultaneously investigated with regard to the relationship between information technology and a firm’s innovation. In this research, the quantitative method was mainly employed. The data was collected with a survey. A total of 224 respondents from herbal manufacturing companies were included in the research. The results presented in this paper demonstrate that knowledge sharing and information technology can critically influence the organization’s innovation and can play a vital role as a significant success factor in this process.

  11. Innovative Technologies for the Solution of Environmental Problems in the World Community

    Directory of Open Access Journals (Sweden)

    T. K. Usmanova

    2017-01-01

    Full Text Available Purpose: the purpose of the article is the disclosure of environmental problems and prospects commercialization of intellectual property within development of innovative information technologies in the conditions of integration of economies into the world economy, identification of opportunities of forming, organization, financing, management, ownership, commercialization and protection of innovative technologies and intellectual property. Relevance of the chosen subject is caused by the current state of ecology and problems of commercialization of intellectual property in development of innovative information technologies within the conditions of integration of economies into the world economy. The existing changes of the current legislation and tendencies of development of the industry of innovative information technologies in field of ecology in the Russian Federation require cardinal review because of its low competitiveness. Ensuring sustainable development of the country directly depends on implementation of innovative information technologies, not only within the sphere of ecology, but also in all industries of the national economy of Russia. Especially important direction of development of innovations is the field of information technologies with its further implementation in innovative productions and provision of services with a focus on protection of ecology and healthcare. Methods: the methodology of the solution of objectives is based on usage of a method of dialectic research, methods of the economic analysis, forecasting, the situational and systemic analysis, expert evaluations and the analysis of empirical data. Results: in the process of researching the direction of solving environmental problems, the author studied foreign and Russian programs based on innovative technologies in this field and identified current proposals regarding the practical implementation of partnerships in the form of Public Private Partnerships PPPs

  12. NON-TECHNOLOGICAL INNOVATION: CURRENT ISSUES AND PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    Cristina Saraiva Pereira

    2013-06-01

    Full Text Available ABSTRACTInnovationcan be considered to be a complex phenomenon including technical andnon-technical aspects. A remarkable increase in the interdisciplinary attention devoted to innovation has been noticed over the recent decades but the formal technological and economic aspects of innovation have received much more attention and have been taken into account in a far greater number of analyses, despite the great importance of the non-technological dimension of innovation.This paper attempts a review on the important subject of non-technological innovation. The main ideas on the non-technological dimension of innovation research will be highlighted, followed by an attempt to integrate diverse and disparate perspectives on the subject, to present evidence on possible generalizations and to discuss eventual research gaps and opportunities for further studies. The relationship between technological and non-technological innovation is complex and not fully understood. Among several aspects that will be covered in this paper, two specific ones will receive special attention in this brief analysis: the evidence on the impacts of non-technological innovation, and the measurements efforts that have been made concerning this phenomenon.

  13. Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

  14. 77 FR 43131 - Designation of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry...

    Science.gov (United States)

    2012-07-23

    ... Designation of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries (PCI... of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries (PCI... determined that the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries...

  15. 77 FR 22359 - Innovative Technology Experiences for Students and Teachers (ITEST) Program; Comment Request

    Science.gov (United States)

    2012-04-13

    ... Innovative Technology Experiences for Students and Teachers (ITEST) Program; Comment Request AGENCY: National...: Innovative Technology Experiences for Students and Teachers (ITEST) Program. Evaluation for the National...: Initial clearance. Abstract: Innovative Technology Experiences for Students and Teachers (ITEST) is a...

  16. 78 FR 70963 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    Science.gov (United States)

    2013-11-27

    ... SPACE ADMINISTRATION NASA Advisory Council; Technology and Innovation Committee; Meeting AGENCY... and Space Administration (NASA) announces a meeting of the Technology and Innovation Committee (TIC... page ``Public Admission to the Technology Innovation Committee Meeting of the NASA Advisory Council...

  17. 75 FR 69631 - National Medal of Technology and Innovation Nomination Evaluation Committee Meeting

    Science.gov (United States)

    2010-11-15

    ...] National Medal of Technology and Innovation Nomination Evaluation Committee Meeting AGENCY: United States... Technology and Innovation (NMTI) Nomination Evaluation Committee will meet in closed session on Tuesday..., Program Manager, National Medal of Technology and Innovation Program, United States Patent and...

  18. Innovation and rationalization of production processes by introduction of computer and information technology. Unapredjenje i racionalizacija proizvodnih procesa uvodjenjem racunarskih informacionih tehnologija

    Energy Technology Data Exchange (ETDEWEB)

    Vujic, S. (Rudarsko-Geoloski Fakultet, Belgrade (Yugoslavia))

    1990-01-01

    Discusses the importance of modern computer and information technology in the mining industry, geology and metallurgy in Yugoslavia. Wide application of this technology is required for rationalization and modernization of production processes. A description of the computerized information and monitoring system of the Kennecott Minerals Co. in Salt Lake City (USA) is made. The network center of the system monitors management of a power plant, surface mines, ore preparation plant, flotation plant as well as smelting and refining plant. The computer-aided management system in an ore surface mine is further outlined. It deals primarily with computer-assisted maintenance and repair of mining equipment. The Kennecott computerized management system is recommended for Yugoslav coal and ore mining enterprises. 6 refs.

  19. Using the regularities of high and critical technologies developing in innovative project management

    Directory of Open Access Journals (Sweden)

    S. G. Selivanov

    2014-01-01

    Full Text Available Problem-orientated to the innovative activity, computer-aided systems of production engineering (CASPE integrates design, manufacture, and organization activities using the interrelated innovation principles thus leaning the innovative activity towards the creation of innovative products and technological innovations of high science and technology level and efficiency. In this situation the innovative activity uses in practice not only the newest experience, but also the science laws and consequences, that is, in particular, “Science of Innovations”. The mentioned science laws explain wave dynamics of technical (technological systems development. In the course of innovation activities and/or innovation designing a modification of continuously acting technological system, usually, causes its developing and growing upwards by Sshaped curve. Changing a principle of action changes S-shaped curve development (Fig. 1. If such changes are within the certain “trace tube” we are entitled to state the steady system development.Analysis of changing target function of technological system within the “trace tube” of its steady development characterizes its growing wave dynamics (Fig. 1 using the S-shaped curves (sigmoid type relations. S-shaped innovative development relations of technological systems are, usually, explained by different mathematical models, each being in compliance with the certain process of science and technology. Singular innovative project management using the S-shaped curves can be explained by the following example (Fig.2.To use such management technique it is very important to know the mathematical models of S-curves for different types of innovation projects. That is why we consider given S-shaped relations in-detail for:- developing the high and critical technologies during R&D implementation using the cutting-edge CASSR (computer-aided systems of scientific research of high and critical technologies in innovation

  20. The Opportunities and Challenges of Persuasive Technology in Creating Sustainable Innovation and Business Model Innovation

    DEFF Research Database (Denmark)

    Aagaard, Annabeth; Lindgren, Peter

    2015-01-01

    The opportunities of persuasive technology in facilitating sustainable innovation and business model innovation have been witnessed continuously during the last decade. The unique ability of persuasive technology in interacting and mediating across users, customers, decisions makers and other...... stakeholders provides access to core knowledge about behavior and opportunities to influence and even change their behavior in a positive and more sustainable manner. Sustainable innovation and business model innovation is gaining more and more competitive leverage due to customer requirements, the growing......-focused sustainable innovation and business model innovation, which is explored through a theoretical review and case examples in the present study. The findings reveal a number of key opportunities to pursue and a number of critical challenges to adjust to as presented in propositions....

  1. Innovation in mathematics education: beyond the technology

    Directory of Open Access Journals (Sweden)

    Salvador Llinares

    2013-06-01

    Full Text Available Relationships between mathematical competence and mathematics teaching innovation do emerge the need for new practices of mathematics teaching. One of the aspects of this new practice is the interaction patterns in the classroom characterizing the mathematical discourse. From these perspectives, the relation between innovation and new mathematics practices defines different contexts for professional development of mathematics teacher.

  2. Family Assets and Liabilities in the Innovation Process

    DEFF Research Database (Denmark)

    Bennedsen, Morten; Foss, Nicolai Juul

    2015-01-01

    stimulate innovation performance. However, family firms can fight this process by institutionalizing innovation within the family and the firm by means of family and corporate governance and through incentivizing key individuals in the innovation process.......Innovation in family firms is often driven by family assets, valuable resources that are particularly prevalent in family firms. For example, they have particularly strong networks that can be deployed in an innovation context. These family assets can over time atrophy and stifle rather than...

  3. Family Assets and Liabilities in the Innovation Process

    DEFF Research Database (Denmark)

    Bennedsen, Morten; Foss, Nicolai Juul

    2015-01-01

    Innovation in family firms is often driven by family assets, valuable resources that are particularly prevalent in family firms. For example, they have particularly strong networks that can be deployed in an innovation context. These family assets can over time atrophy and stifle rather than...... stimulate innovation performance. However, family firms can fight this process by institutionalizing innovation within the family and the firm by means of family and corporate governance and through incentivizing key individuals in the innovation process....

  4. Technological Innovation Characteristics and Capacity Enhancement Ways for the Agricultural Science and Technology Enterprises in Beijing City

    Institute of Scientific and Technical Information of China (English)

    Ping LI; Ruimei WANG; Xun ZHENG

    2016-01-01

    From the perspective of innovation mechanism,capital,personnel,achievements and conversion,this study analyzes the current situation of technological innovation in Beijing agricultural science and technology enterprises,and summarizes the characteristics including single financing channel of R&D funds,low conversion rate of innovative products,unbalanced distribution of technology and innovative talents,the underestimated position of enterprises as the main body of technological innovation,the large gap of innovation achievements between developed provinces and Beijing.At last,this study puts forward the ways to improve technological innovation ability in Beijing agricultural science and technology enterprises as follows:developing technological innovation strategies;improving the R&D expenditure and expanding the financing channels;perfecting the mechanism of professional personnel training in agricultural technology innovation;enhancing the level of innovation performance management;establishing and improving the corporate culture of innovation and cultivating technology innovation spirit.

  5. VLSI signal processing technology

    CERN Document Server

    Swartzlander, Earl

    1994-01-01

    This book is the first in a set of forthcoming books focussed on state-of-the-art development in the VLSI Signal Processing area. It is a response to the tremendous research activities taking place in that field. These activities have been driven by two factors: the dramatic increase in demand for high speed signal processing, especially in consumer elec­ tronics, and the evolving microelectronic technologies. The available technology has always been one of the main factors in determining al­ gorithms, architectures, and design strategies to be followed. With every new technology, signal processing systems go through many changes in concepts, design methods, and implementation. The goal of this book is to introduce the reader to the main features of VLSI Signal Processing and the ongoing developments in this area. The focus of this book is on: • Current developments in Digital Signal Processing (DSP) pro­ cessors and architectures - several examples and case studies of existing DSP chips are discussed in...

  6. Competition and innovation in a technology setting software duopoly

    DEFF Research Database (Denmark)

    Bitzer, Jürgen; Schröder, Philipp

    2003-01-01

    the assumption that software producers compete in technology rather than price or quantities. The model includes the presence of technological progress and menu costs of adjusting existing software, i.e. innovation. It is found that: (i) moving from monopoly to duopoly does increase the technology level set...... by firms in the software industry; (ii) a duopoly adjusts more readily to global technological progress than a monopolist. Furthermore, results are presented comparing open source versus for-profit firms in terms of technology levels and innovation....

  7. Technological innovation and valorisation of traditional food: a sustainable combination?

    Directory of Open Access Journals (Sweden)

    Marco Dalla Rosa

    2009-10-01

    Full Text Available Valorization of traditional foods is nowadays a key element for market developments where national industries are strongly involved in saving product peculiarity against imitative food coming from foreign countries or even different continents. Other than the lack in well defined and garanteed sensorial quality, the production conditions, the quality of raw material and the different cultural background lead to produce foods that, despite to the name indicating some italian origin or recallin in some ways Italy and italian food and traditions, are only imitation without safety and quality proper of the original traditional food. Thus it is necessary to individuate appropriated technologies and strategies to increase le level of garantee offered to the consumer in order to promote the consumption of traditional foods with the promised quality and safety. In this paper the role that the modern food technology and the food science can assume to improve the processing conditions and yields, introducing some innovations into the old processes will be pointed out. Furthermore, the characterization of the complexity of the chemical, chemico-physical and rheological properties that influence the whole sensorial aspect of traditional foods, both from animal and vegetal (and fruit origin, is a growing challenge of the food science since the new analytical methodologies now available. In the paper some example of objective characterization and introduction of innovation steps are reported as well as genuinity marker individuation in order to give sustainability to the production of traditional foods in particular in SME.

  8. Filling the Gap with Technology Innovations: Standards, Curriculum, Collaboration, Success!

    Science.gov (United States)

    Williams, Mia Kim; Foulger, Teresa S.

    2007-01-01

    Filling the Gap with Innovations is a study of a higher education professional development model used to infuse a teacher education program with technology innovations in order to address curriculum gaps. Professional educators at the university level are not traditionally collaborative. Yet, when an assessment of program alignment to state…

  9. Concept relation discovery and innovation enabling technology (CORDIET)

    NARCIS (Netherlands)

    Poelmans, J.; Elzinga, P.; Neznanov, A.; Viaene, S.; Kuznetsov, S.O.; Ignatov, D.; Dedene, G.

    2011-01-01

    Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self

  10. Understanding University Faculty Perceptions about Innovation in Teaching and Technology

    Science.gov (United States)

    Kopcha, Theodore J.; Rieber, Lloyd P.; Walker, Brandy B.

    2016-01-01

    The purpose of this research is to understand faculty perceptions about innovation in teaching and technology in a college of education in a research-intensive university. This study was motivated by the creation of a new initiative begun in a large college of education at a Carnegie Research-Intensive university to promote innovation in teaching…

  11. The Role of Nonprofits in Educational Technology Innovation

    Science.gov (United States)

    Zucker, Andrew A.

    2009-01-01

    For decades, nonprofit organizations have played a vital role in educational technology innovation. "Sesame Street," online high schools, probeware for science and mathematics teaching and learning, and many other innovations now widely used both in and outside schools were developed by nonprofits, including not only universities but also…

  12. Innovation in industry and the diffusion of technology.

    Science.gov (United States)

    Utterback, J M

    1974-02-15

    The varied definitions used in the sources that have been discussed make any aggregate analysis difficult. A simple three-stage analysis of flows to, from, and within the firm was used to facilitate comparisons. Even so, each of the generalizations is drawn from relatively small and unrepresentative samples. Case studies may continue to be a source of ideas and hypotheses for further research, but do not appear to offer a means for deeper understanding of the innovation process. The retrospective nature of nearly all of the sources discussed probably means that the process has been viewed as much more rational and well-ordered than it is in fact. This failing is partially overcome in firsthand accounts such as those of Suites and Bueche (63) and Frey and Goldman (64). Each of these accounts involves a successful innovation according to technical or commercial criteria, or both. However, many of the characteristics of innovations that have failed commercially (10) appear to be similar to those of successful cases. The few longitudinal studies, and studies comparing more and less successful cases, do support the main conclusions drawn above (10, 32, 38). More serious problems are raised by the distinctly nonrepresentative nature of the samples used. There are few cases (17, 33, 65) in which the contributions of more than one organization, or details of interactions over a significant period of time, are discussed. There is a wide variation in the importance of the innovations included, ranging from those affecting the economy as a whole to cases involving production in a single firm, albeit with significant commercial results (66). In addition to questions of comparability and sampling, a central problem for further research on innovation will be to devise an operational model to account for interfirm and interindustry differences. Polar definitions used in past studies, "high technology" and "mature industry," for example, are insufficient. One possibility is to use

  13. Innovation with information technologies in healthcare

    CERN Document Server

    Berkowitz, Lyle

    2012-01-01

    This book offers healthcare executives, consultants and vendors a truly helpful and practical resource for planning and implementing healthcare IT, one which provides real life examples as well as advice on how to utilize HIT in a truly innovative manner.

  14. New Building Technology, Innovation, and Government Interests

    National Research Council Canada - National Science Library

    2017-01-01

    This book explores innovation in the U.S. construction-related industries (i.e., design services, construction, building materials and products manufacture, and facilities operation and maintenance...

  15. Innovative technology summary report: Transportable vitrification system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    At the end of the cold war, many of the Department of Energy`s (DOE`s) major nuclear weapons facilities refocused their efforts on finding technically sound, economic, regulatory compliant, and stakeholder acceptable treatment solutions for the legacy of mixed wastes they had produced. In particular, an advanced stabilization process that could effectively treat the large volumes of settling pond and treatment sludges was needed. Based on this need, DOE and its contractors initiated in 1993 the EM-50 sponsored development effort required to produce a deployable mixed waste vitrification system. As a consequence, the Transportable Vitrification System (TVS) effort was undertaken with the primary requirement to develop and demonstrate the technology and associated facility to effectively vitrify, for compliant disposal, the applicable mixed waste sludges and solids across the various DOE complex sites. After 4 years of development testing with both crucible and pilot-scale melters, the TVS facility was constructed by Envitco, evaluated and demonstrated with surrogates, and then successfully transported to the ORNL ETTP site and demonstrated with actual mixed wastes in the fall of 1997. This paper describes the technology, its performance, the technology applicability and alternatives, cost, regulatory and policy issues, and lessons learned.

  16. Biomaterials innovation bundling technologies and life

    CERN Document Server

    Styhre, A

    2014-01-01

    Rapid advances in the life sciences means that there is now a far more detailed understanding of biological systems on the cellular, molecular and genetic levels. Sited at the intersection between the life sciences, the engineering sciences and the design sciences, innovations in the biomaterials industry are expected to garner increasing attention and play a key role in future development. This book examines the biomaterials innovations taking place in corporations and in academic research settings today.

  17. 40 CFR 35.935-20 - Innovative processes and techniques.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Innovative processes and techniques. 35... § 35.935-20 Innovative processes and techniques. If the grantee receives 85-percent grant assistance for innovative processes and techniques, the following conditions apply during the 5-year period...

  18. ANALYSIS OF THE MECHANISM MODELS OF TECHNOLOGICAL INNOVATION DIFFUSION

    Institute of Scientific and Technical Information of China (English)

    XU Jiuping; HU Minan

    2004-01-01

    This paper analyzes the mechanism and principle of diffusion of technology diffusion on the basis of quantitative analysis. Then it sets up the diffusion model of innovation incorporating price, advertising and distribution, the diffusion model of innovation including various kinds of consumers, and the substitute model between the new technology and the old one applied systems dynamics, optimization method, probabilistic method and simulation method on computer. Finally this paper concludes with some practical observations from a case study.

  19. Technological and organisational innovations in the retail trade modernisation process Inovações tecnológicas e organizacionais no processo de modernização do comércio varejista

    Directory of Open Access Journals (Sweden)

    José Tarcísio Pires Trindade

    2000-05-01

    Full Text Available Aspects of the modernisation process in the sector of distribution service, in particular the self-service segment, supermarkets and department stores are analysed. The adoption of technological and organisational innovation is essential for organisations to face the strong competition present in all sectors of the economy. Current practices of technological and organisational innovations are analysed and their impact on the performance of companies discussed. The analysis and discussion that ensue are based on case studiesO trabalho discute alguns aspectos do processo de modernização do setor de serviços de distribuição, em especial o segmento de auto-serviço, supermercados e lojas de departamento. Nesse processo a adoção das inovações tecnológicas e organizacionais é fundamental para as organizações enfrentarem a forte competição que existe no setor, e na economia como um todo, nos anos mais recentes. As análises sobre as inovações tecnológicas e organizacionais adotadas bem como os impactos no plano de realizações das empresas foram baseadas em estudos de caso

  20. Renewable energy-driven innovative energy-efficient desalination technologies

    KAUST Repository

    Ghaffour, Noreddine

    2014-04-13

    Globally, the Kingdom of Saudi Arabia (KSA) desalinates the largest capacity of seawater but through energy-intensive thermal processes such as multi-stage flash (MSF) distillation (>10 kW h per m3 of desalinated water, including electrical and thermal energies). In other regions where fossil energy is more expensive and not subsidized, seawater reverse osmosis (SWRO) is the most common desalination technology but it is still energy-intensive (3-4 kW h_e/m3). Both processes therefore lead to the emission of significant amounts of greenhouse gases (GHGs). Moreover, MSF and SWRO technologies are most often used for large desalination facilities serving urban centers with centralized water distribution systems and power grids. While renewable energy (RE) sources could be used to serve centralized systems in urban centers and thus provide an opportunity to make desalination greener, they are mostly used to serve rural communities off of the grid. In the KSA, solar and geothermal energy are of most relevance in terms of local conditions. Our group is focusing on developing new desalination processes, adsorption desalination (AD) and membrane distillation (MD), which can be driven by waste heat, geothermal or solar energy. A demonstration solar-powered AD facility has been constructed and a life cycle assessment showed that a specific energy consumption of <1.5 kW h_e/m3 is possible. An innovative hybrid approach has also been explored which would combine solar and geothermal energy using an alternating 12-h cycle to reduce the probability of depleting the heat source within the geothermal reservoir and provide the most effective use of RE without the need for energy storage. This paper highlights the use of RE for desalination in KSA with a focus on our group\\'s contribution in developing innovative low energy-driven desalination technologies. © 2014 Elsevier Ltd. All rights reserved.

  1. Using Hybrid Model to Evaluate Performance of Innovation and Technology Professionals in Marine Logistics Industry

    Directory of Open Access Journals (Sweden)

    Qunzhen Qu

    2015-01-01

    Full Text Available With the development of marine logistics industry to grow, the government and corporate more and more attach importance to the performance evaluation of innovation and technology professionals. Combine the characteristics of marine logistics industry and innovative technology professionals to design a performance evaluation index of marine logistics industry in innovation and technology professionals, with the Analytic Hierarchy Process (AHP to determine the weights of the various performance indicatorsf and through the establishment of fuzzy comprehensive evaluation model to make the problems of complex performance evaluation quantification and then come to their performance evaluation results, and provide reference methods and recommendations for innovation and technology professionals in performance evaluation theory and practice of marine logistics industry.

  2. Roadmapping and Strategy in Science, Technology and Innovation: Why connectivity matters

    DEFF Research Database (Denmark)

    Ricard, Lykke Margot

    The thesis focuses on the coordination of technology-intensive innovation activities at both sector and firm levels, supported by the use of the strategic roadmapping method. Investigations combine qualitative and quantitative research methods; using a narrative approach in the form of interviews...... to uncover innovation and technology barriers, and a social network analysis of stakeholders’ role in relation to two technology platforms: TPWind and ZEP (Zero Emission Platform), during a five-year period when the roadmaps 2020 were developed. In this respect, the thesis emphasizes the view of innovation...... as an interactive process to develop competences among technology users, producers, research institutions, and politicians. As a result, knowledge on how the platforms evolved, and their dynamics, provide new reflections on the innovation systems approach: that connectivity seems to change along the changes...

  3. Innovative forming and fabrication technologies : new opportunities.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest

  4. Small Business Innovation Research and Small Business Technology Transfer Programs

    Science.gov (United States)

    Garrison, Lynn; Jasper, Gwen

    2015-01-01

    The Small Business Innovation Research (SBIR)/Small Business Technology Transfer (STTR) programs fund the research, development, and demonstration of innovative technologies that fulfill NASA's needs as described in the annual Solicitations and have significant potential for successful commercialization. The only eligible participants are small business concern (SBC) with 500 or fewer employees or a nonprofit research institute such as a university or a research laboratory with ties to an SBC. These programs are potential sources of seed funding for the development of small business innovations.

  5. How Weak Is China’s Technological Innovation Ability?

    Institute of Scientific and Technical Information of China (English)

    谢伟

    2007-01-01

    According to the national mainstream view,China remains weak in terms of technological innovation and,as a"world factory", is situated at the lower end of the global value chain.However,lacking in innovative ability,how can China,a great power in the manufacturing industry, gain a competitive edge? Xie Wei’s article provides an answer to this question. Using China’s video disk player industry as an example and based upon the differentiation between systematic innovation,critical innovation and peripheral innovation,the author analyzes the distribution of innovation among Chinese enterprises and looks into the reasons behind the market entry strategies adopted by Chinese enterprises and their ensuing success.

  6. TELEGRAPHS TO INCANDESCENT LAMPS: A SEQUENTIAL PROCESS OF INNOVATION

    Directory of Open Access Journals (Sweden)

    Laurence J. Malone

    2000-01-01

    Full Text Available This paper outlines a sequential process of technological innovation in the emergence of the electrical industry in the United States from 1830 to 1880. Successive inventions that realize the commercial possibilities of electricity provided the foundation for an industry where technical knowledge, invention and diffusion were ultimately consolidated within the managerial structure of new firms. The genesis of the industry is traced, sequentially, through the development of the telegraph, arc light and incandescent lamp. Exploring the origins of the telegraph and incandescent lamp reveals a process where a series of inventions and firms result from successful efforts touse scientific principles to create new commodities and markets.

  7. PNAUM: integrated approach to Pharmaceutical Services, Science, Technology and Innovation

    Science.gov (United States)

    Gadelha, Carlos Augusto Grabois; Costa, Karen Sarmento; do Nascimento, José Miguel; Soeiro, Orlando Mário; Mengue, Sotero Serrate; da Motta, Márcia Luz; de Carvalho, Antônio Carlos Campos

    2016-01-01

    ABSTRACT This paper describes the development process of the Pesquisa Nacional sobre Acesso, Utilização e Promoção do Uso Racional de Medicamentos (PNAUM – National Survey on Access, Use and Promotion of Rational Use of Medicines) based on an integrated approach to pharmaceutical services, science, technology and innovation. It starts by contextualizing health and development in Brazil and features elements of the National Policy for Science, Technology and Innovation in Health in Brazil and the National Policy for Pharmaceutical Services. On presenting pharmaceutical policy guidelines, it stresses the lack of nationwide data. This survey, commissioned by the Brazilian Ministry of Health, has two components: household survey and evaluation of pharmaceutical services in primary care. The findings point to perspectives that represent, besides the enhancement of public policy for pharmaceutical services and public health, results of government action aimed at developing the economic and industrial health care complex to improve the health conditions of the Brazilian population. PMID:27982379

  8. Incorporating Enterprise Risk Management in the Business Model Innovation Process

    OpenAIRE

    Yariv Taran; Harry Boer; Peter Lindgren

    2013-01-01

    Purpose: Relative to other types of innovations, little is known about business model innovation, let alone the process of managing the risks involved in that process. Using the emerging (enterprise) risk management literature, an approach is proposed through which risk management can be embedded in the business model innovation process. Design: The integrated business model innovation risk management model developed in this paper has been tested through an action research study in a Dani...

  9. COST-EFFECTIVENESS OF INNOVATIVE TECHNOLOGIES BAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    I. P. Bogomolova

    2014-01-01

    Full Text Available Summary.Research priorities is the development of food therapeutic and prophylactic purposes, innovative methods of complex processing of raw materials with maximum preservation of the original chemical composition and on the basis of a new product release in generation functionality. This article explores the many reasons for the lag of the Patriotic-owned enterprises in terms of technological development, analyzes the features of innovation in the bakery production of Russia, proposed the current directions for the innovative development of grain-processing industry. The observation revealed that during the years of market transformations in the bakeries have been significant changes, especially in the volume of products sold. Based on the results of statistical studies, it was found that at least 75% of the population consume daily baked goods and this makes them appropriate nutrient enrichment. The current state and bakeries, bakeries and revealed a high degree of wear of the process equipment. Over the past 14 years, marked by a decline in production, which led to a decline in production output and profitability constraints. It was found that in bakeries and bakeries deterioration index technique is approximately 67%. With respect to raw materials for bread production, noted that the creation of a civilized grain market in Russia requires the solution of a number of key issues. It is established that is currently happening aggression from industrialized countries to seize the Russian food market, leading to a narrowing of the domestic demand for domestic products, and this causes the drop in the economic growth of the food industry. The analysis revealed that there is considerable potential for the development of the industry.

  10. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  11. Reducing the distance in distance-caregiving by technology innovation

    Directory of Open Access Journals (Sweden)

    Lazelle E Benefield

    2007-07-01

    Full Text Available Lazelle E Benefield1, Cornelia Beck21College of Nursing, University of Oklahoma Health Sciences Center, Oklahoma City, Oklahoma, USA; 2Pat & Willard Walker Family Memory Research Center, University of Arkansas for Medical Sciences, Little Rock, Arkansas, USAAbstract: Family caregivers are responsible for the home care of over 34 million older adults in the United States. For many, the elder family member lives more than an hour’s distance away. Distance caregiving is a growing alternative to more familiar models where: 1 the elder and the family caregiver(s may reside in the same household; or 2 the family caregiver may live nearby but not in the same household as the elder. The distance caregiving model involves elders and their family caregivers who live at some distance, defined as more than a 60-minute commute, from one another. Evidence suggests that distance caregiving is a distinct phenomenon, differs substantially from on-site family caregiving, and requires additional assistance to support the physical, social, and contextual dimensions of the caregiving process. Technology-based assists could virtually connect the caregiver and elder and provide strong support that addresses the elder’s physical, social, cognitive, and/or sensory impairments. Therefore, in today’s era of high technology, it is surprising that so few affordable innovations are being marketed for distance caregiving. This article addresses distance caregiving, proposes the use of technology innovation to support caregiving, and suggests a research agenda to better inform policy decisions related to the unique needs of this situation.Keywords: caregiving, family, distance, technology, elders

  12. Diffusion of an innovation: Computer technology integration and the role of collaboration

    OpenAIRE

    Hoerup, Sharon Lynn

    2001-01-01

    (Abstract) This study investigates the extent to which teachers adopted a computer technology innovation and the role of collaboration in the adoption process. Semi-structured interviews with seven teachers and one Computer Resource Teacher, supplemented by observations and documentation regarding the innovation, provide data for an in-depth, ethnographic case study. Six months were spent in the setting recording the teachers' interactions and processes centered on adopting the innovati...

  13. How innovation commons contribute to discovering and developing new technologies

    Directory of Open Access Journals (Sweden)

    Darcy W.E. Allen

    2016-09-01

    Full Text Available In modern economics, the institutions surrounding the creation and development of new technologies are firms, markets and governments. We propose an alternative theory that locates the institutional origin of new technologies further back in the commons when self-organizing groups of technology enthusiasts develop effective governance rules to pool distributed information resources. The ‘innovation commons’ alleviates uncertainty around a nascent technology by pooling distributed information about uses, costs, problems and opportunities. While innovation commons are mostly temporary, because the resource itself – the information about opportunities – is only temporarily valuable, they are a further addition to the Pantheon of commons, and suggest that the institutions of the commons – and the common pool resource of information about applications of the technology – may be far more important in the study of innovation than previously thought.

  14. Accelerating nano-technological innovation in the Danish construction industry

    DEFF Research Database (Denmark)

    Koch, Christian; Stissing Jensen, Jens

    2007-01-01

      By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which...... concludes that opportunities are generally poorly appreciated by the industry and research communities alike. It is found that the construction industry is characterised by low-tech trajectories where dedicated innovation networks are often too fragile for innovations to stabilize and diffuse....... The institutional features of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support "incubation rooms" or marked...

  15. Auditing of Innovation Process: a case study in Inmetro

    Directory of Open Access Journals (Sweden)

    Vanessa Lage Bellazzi de Pellegrini

    2014-04-01

    Full Text Available The main objective of the research was to describe the contribution of the audit for the INMETRO innovation process. The intermediate objectives sought to characterize the innovation process INMETRO; identify the procedures and instruments used by the institute in the auditing of the innovation process, and describe the influence of the auditing in the development of two innovations by INMETRO. As a secondary objective the INMETRO innovation process was evaluated by using the evaluation model of Tidd, Bessant & Pavitt (2008.The research method was a single case study with a descriptive purpose. Semistructured interviews with eight employees working with audit and control as well as narratives of two innovations by employees who closely followed the development of innovations were used for data collection. The collected data were treated by means of content analysis. The survey results indicated that neither the innovation process nor the process innovation audit is institutionalized in INMETRO. This makes each main unit of the institute develop innovations according to a viewpoint itself. The absence of reports of audit processes of innovation management with suggestions for improvements in the processes of innovation, and the few references to issues related to audit on the accounts obtained during narratives of development of the innovations surveyed show that the influence of management innovation audit is still small in INMETRO. This is compounded by the fact that management innovation audit is still in its infancy. Paradoxically the legitimate concern of the Institute with normalization may be harming the correct understanding of what would be the appropriate procedures and instruments to an innovation audit. While not referring directly to the question innovation, often appear reports of respondents complaining of excessive standards.

  16. Innovation

    DEFF Research Database (Denmark)

    Nielsen, Janni; Yaganeh, Suzanne; Bloch Rasmussen, Leif

    2013-01-01

    This paper contributes to a theoretical discussion of creation of innovation with participants in, or outside, organisations. We address the creation of innovation with a complex theoretical understanding drawing on the Scandinavian and the Participatory Design tradition introducing two approaches...... to the processes of innovation. We ask if innovation can be initiated and enhanced looking at two collaborative approaches; participatory innovation (PIN) and cooperative innovation (COIN). We invite to dialogue and reflections on PIN’s conflict and creative frictions on one side and COIN’s complexity......, complementarity in diversity and the didactic scaffolding of the innovation process on the other side. Our contribution focuses on the methods and practices for facilitation of co-creating activities between different groups leading to cooperation, and innovation in thinking....

  17. European consumers' acceptance of beef processing technologies

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Grunert, Klaus G.

    2010-01-01

    The use of new technologies in beef production chains may affect consumers' opinion of meat products. A qualitative study was performed to investigate consumers' acceptance of seven beef processing technologies: marinating by injection aiming for increased 1) healthiness; 2) safety; and 3) eating...... adults (19-60 years old) participated in eight focus groups in Spain, France, Germany and the UK. Results suggested a relationship between acceptance of new beef products, technology familiarity and perceived risks related to its application. Excessive manipulation and fear of moving away from 'natural......' beef were considered negative outcomes of technological innovations. Beef processing technologies were predominantly perceived as valuable options for convenience shoppers and less demanding consumers. Overall, respondents supported the development of 'non-invasive' technologies that were able...

  18. Perspectives on Multienzyme Process Technology

    DEFF Research Database (Denmark)

    Santacoloma, Paloma A.; Woodley, John M.

    2014-01-01

    There is little doubt that chemical processing of the future will involve an increasing number of biocatalytic processes using more than one enzyme. There are good reasons for developing such innovative biocatalytic processes and interesting new biocatalyst and process options will be introduced....

  19. Padrões tecnológicos e processo de inovação de produtos: o caso da Itautec-Philco S.A. Technology standards and product innovation process: the case of itautec-philco

    Directory of Open Access Journals (Sweden)

    Dionisio dos Santos Júnior

    2000-08-01

    Full Text Available O objetivo deste trabalho é apresentar e discutir a influência dos padrões tecnológicos no processo de inovação de produtos da indústria de computadores, focalizando o caso em que se tem de lidar com padrões já estabelecidos. Com este fim foi estudado o processo de definição de produtos da linha de microcomputadores fabricados pela Itautec-Philco S.A. O trabalho mostra que os padrões tecnológicos da indústria devem ser cuidadosamente considerados nas análises das decisões de projeto da empresa, pois condicionam as direções e os ritmos das estratégias tecnológicas e das mudanças técnicas implementadas.This article seeks to illustrate the influence of technology standards in the process of product innovation. An analysis of the situation in which firms have to deal with industry standards already established was carried out as well as the analysis of the product definition process of the microcomputer line developed by Itautec-Philco S.A, a Brazilian computer company. This article shows that computer technology standards are a core element to consider in the analysis of the project decisions, because they condition directions and rates of technology strategies and technical changes implemented.

  20. Cross-industry innovation processes strategic implications for telecommunication companies

    CERN Document Server

    Hahn, Tobias

    2015-01-01

    Based on multiple case study analysis, focusing on scalable service innovation, the present study provides a practical process model that shall serve telecommunication companies as a guideline while conducting strategic cross-industry innovation projects. The findings also pay attention to characteristics in cross-industry collaboration, organizational preconditions and strategic deliberations and postulate propositions for present theoretical innovation process models.

  1. Towards an understanding of business model innovation processes

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2009-01-01

    Companies today, in some industries more than others, invest more capital and resources just to stay competitive, develop more diverse solutions, and increasingly start to think more radically, when considering to innovate their business model. However, the development and innovation of business ...... by proposing a generic process to business model innovation, supported by risk management processes....

  2. Past, Present and Future of the Innovation Process

    Directory of Open Access Journals (Sweden)

    Ondřej Žižlavsk y

    2013-09-01

    management control of innovation performance under the postdoc research project “Innovation Process Performance Assessment: a Management Control System Approach in the Czech Small and Medium-sized Enterprises” No. 13- 20123P of the Czech Science Foundation.

  3. Innovative Use of Cloud Computing in Smart Phone Technology

    Directory of Open Access Journals (Sweden)

    Vaibhav Rana

    2013-07-01

    Full Text Available This paper elaborates the vital and innovative use of Cloud computing in the field of Smart Phone Technology. In the proposed environment there is a cloud server installed at the central place called as cloud center of mobile computing. The function of cloud computing is to accept the request of the end users and process the required applications accordingly. Henceforth this server is fully equipped with all advance ICT infrastructure, mobile communication utilities and full security measure, so that every feature can be used with full security. All users are having equal priority to get connection with the cloud server and use every application as well as each function equally. Due to use of this modern technology the main advantage is that a single entity is being used by many remote users for various requirements at the same time without occupying much space and infrastructure. The resulting new paradigm of mobile cloud computing is being embraced by researchers, professionals and practitioners as an exciting new way to extend the capabilities of mobile devices and mobile platforms. This has the potential for profound impacts on the business environment and people's daily life. The most salient feature of the system is that by the use of this infrastructure we can perform mobile communication and electronic communication by a single unit and the same communication spectrum. The presented cloud computing technology offers a natural solution for expending the limited capabilities of mobile devices. This process makes the whole communication system cost effective, efficient, transparent, modular system.

  4. Identification of Characteristic Features of Structural Change in the Research and Innovation Process

    Directory of Open Access Journals (Sweden)

    Mikhail Aleksandrovich Gusakov

    2015-12-01

    Full Text Available The paper substantiates and identifies the characteristics and emerging trends of structural change in the research and innovation process in the conditions of formation of post-industrial economy and transition to post-industrial technology. The characteristics and developments concern the structure of the research and innovation process, research and development quality, the role of basic science and high technology, the place of services in research and innovation products, and the spatial context of the structure. The evolution of the concept and content (structure of the research and innovation process determines the initial trend in the specific features of structural change in the research and innovation process. The authors of the article investigate the dynamics of the main indicators of innovation activity as an integrated result of boosting the efficiency of the research and innovation process, the indicators of development of high-tech industries with special emphasis on nanotechnology and information and communication technology, the indicators of dissemination of post-industrial economic services, in the spatial context as well. The article reveals a tendency towards the implementation of the research and innovation process in the spatial dimension. The authors reveal characteristic features of structural change in the research and innovation process and several emerging shifts in the structure of the process; this helps to outline certain specific requirements to the organizational-economic mechanism, the feasibility of changing institutional conditions and institutions for the purpose of strengthening the promising trends of development of post-industrial technology and acceleration of innovation development

  5. New Progress on Self-Reliant Innovation of HVDC Technology

    Institute of Scientific and Technical Information of China (English)

    Li Yan; Li Xiaolin; Rao Hong; Zhao Jie; Yang Xiaoli

    2009-01-01

    @@ It is an important direction for China's power industry to master the design and the equipment manufacturing core technology of large-capacity HVDC power transmission systems,and to form the sustainable development capability.Before the self-reliant innovation of Guiguang Ⅱ HVDC project in 2004,the deficiency of the HVDC core technology in China was shown in the following aspects.

  6. Technology Innovation for Promoting The Development of Space Industry

    Institute of Scientific and Technical Information of China (English)

    SunQing

    2005-01-01

    Forum on The Technology Innovation for Promoting The Development of Space Industry,hosted by China National Space Administration (CNSA) and China Association of Science and Technology (CAST), was held in Beijing on April 1,2005. Nearly one hundred experts from space industry attended the forum. They got together to have discussions on the industrialization of space industry.

  7. Organisational Culture and Technology-Enhanced Innovation in Higher Education

    Science.gov (United States)

    Zhu, Chang

    2015-01-01

    Higher education institutions are evolving and technology often plays a central role in their transformations. Educational changes benefit from a supportive environment. The study examines the relationship between organisational culture and teachers' perceptions of and responses to technology-enhanced innovation among Chinese universities. A…

  8. Biomimicry and the Materiality of Ecological Technology and Innovation

    NARCIS (Netherlands)

    Blok, V.

    2016-01-01

    In this paper, we reflect on the concept of nature that is presupposed in biomimetic approaches to technology and innovation. Because current practices of biomimicry presuppose a technological model of nature, it is questionable whether its claim of being a more ecosystem friendly approach to

  9. Organisational Culture and Technology-Enhanced Innovation in Higher Education

    Science.gov (United States)

    Zhu, Chang

    2015-01-01

    Higher education institutions are evolving and technology often plays a central role in their transformations. Educational changes benefit from a supportive environment. The study examines the relationship between organisational culture and teachers' perceptions of and responses to technology-enhanced innovation among Chinese universities. A…

  10. Disruptive Innovation in Air Measurement Technology: Reality or Hype?

    Science.gov (United States)

    This presentation is a big picture overview on the changing state of air measurement technology in the world, with a focus on the introduction of low-cost sensors into the market place. The presentation discusses how these new technologies may be a case study in disruptive innov...

  11. Disruptive Innovation in Air Measurement Technology: Reality or Hype?

    Science.gov (United States)

    This presentation is a big picture overview on the changing state of air measurement technology in the world, with a focus on the introduction of low-cost sensors into the market place. The presentation discusses how these new technologies may be a case study in disruptive innov...

  12. Innovation as a distributed, collaborative process of knowledge generation: open, networked innovation

    NARCIS (Netherlands)

    Sloep, Peter

    2009-01-01

    Sloep, P. B. (2009). Innovation as a distributed, collaborative process of knowledge generation: open, networked innovation. In V. Hornung-Prähauser & M. Luckmann (Eds.), Kreativität und Innovationskompetenz im digitalen Netz - Creativity and Innovation Competencies in the Web, Sammlung von ausgewäh

  13. Innovation as a distributed, collaborative process of knowledge generation: open, networked innovation

    NARCIS (Netherlands)

    Sloep, Peter

    2009-01-01

    Sloep, P. B. (2009). Innovation as a distributed, collaborative process of knowledge generation: open, networked innovation. In V. Hornung-Prähauser & M. Luckmann (Eds.), Kreativität und Innovationskompetenz im digitalen Netz - Creativity and Innovation Competencies in the Web, Sammlung von

  14. Innovation as a distributed, collaborative process of knowledge generation: open, networked innovation

    NARCIS (Netherlands)

    Sloep, Peter

    2009-01-01

    Sloep, P. B. (2009). Innovation as a distributed, collaborative process of knowledge generation: open, networked innovation. In V. Hornung-Prähauser & M. Luckmann (Eds.), Kreativität und Innovationskompetenz im digitalen Netz - Creativity and Innovation Competencies in the Web, Sammlung von ausgewäh

  15. HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

  16. INNOVATIVE MODERNIZATION AND TECHNOLOGICAL DEVELOPMENT: THE REJECTION OR ADJUSTMENT OF THE STRATEGY?

    Directory of Open Access Journals (Sweden)

    N. I. Komkov

    2013-01-01

    Full Text Available The state of the innovation processes of modernization of the Russian economy. The slow progress in the creation of new technologies and their development, significantly lagging behind the normative assessments set by the federal documents. Based on the analysis of reasons for the low rate of innovation modernization makes proposals to address them in a new model of economic development that can provide innovative solutions to domestic demand, support for long production chains in the economy and harmonize the development of production, processing and manufacturing industries..

  17. A dedicated fund supports technological innovation

    CERN Multimedia

    Katarina Anthony

    2010-01-01

    The Knowledge and Technology Transfer (KTT) Group is calling on CERN Departments to take their technology out of the confines of the laboratory and make it ready for dissemination. For the first time, projects can apply for financial support from the newly established KTT Fund.   Scientific inquiry can lead to unexpected developments for society when researchers apply their expertise for public use. CERN actively encourages this transfer of knowledge and technology and, for the first time, has created a dedicated fund to provide financial support to projects aiming at disseminating their technologies to external audiences. CERN’s technology transfer schemes were formalised in the recent Policy on the Management of Intellectual Property in Technology Transfer, approved in March. Revenues generated by commercial exploitation will be distributed between the members of the team that developed the technology, their Department, and the KTT Fund for reinvestment in further KTT projects. &qu...

  18. The Identification of Technology Platforms and Innovation Areas with High Regional Impact

    Directory of Open Access Journals (Sweden)

    Nataša Urbančíková

    2011-10-01

    Full Text Available The paper is focused on the process of identification of the technological platforms and innovation areas with high regional impact. The aim is to discover future fields of technological innovation which are having a high qualitative and quantitative demand of high potentials. The research has been undertaken within project Innovative Development of European Areas by fostering transnational Knowledge Development – IDEA/ 2CE1175P1 funded by Central Europe Programme. The aim of IDEA project is the development of an adequate strategy which enables the small and medium sized enterprises in the regions of Central Europe to face the increasing demand of high potentials with tested methods and instruments. The target group of IDEA project are so called “high potentials” in the engineering and scientific sector where future-oriented technologies are one of the main sources of innovation.

  19. [Medical technology innovation: why get involved and how?].

    Science.gov (United States)

    Azagury, Dan E; Buchs, Nicolas C; Volonté, Francesco; Morel, Philippe

    2013-06-19

    Medical technologies are an intrinsic part of our daily practice. More than a simple recipient of novel medical devices, clinicians have a unique role to play in medtech innovation. They are invaluable assets for testing devices and guiding manufacturers towards the most clinically relevant solutions. More importantly, they have a direct view on patient needs and can therefore identify unmet clinical needs. As these skills are not part of medical school curricula, new centers in medtech innovation education are arising across Europe following the success of US programs. These centers offer a full curriculum in medtech innovation so that doctors can more actively participate and foster innovation in their field. This new knowledge can allow us to initiate our own innovations and potentially influence the future of our own practice.

  20. Innovative machine designs for radiation processing

    Science.gov (United States)

    Vroom, David

    2007-12-01

    In the 1990s Raychem Corporation established a program to investigate the commercialization of several promising applications involving the combined use of its core competencies in materials science, radiation chemistry and e-beam radiation technology. The applications investigated included those that would extend Raychem's well known heat recoverable polymer and wire and cable product lines as well as new potential applications such as remediation of contaminated aqueous streams. A central part of the program was the development of new accelerator technology designed to improve quality, lower processing costs and efficiently process conformable materials such at liquids. A major emphasis with this new irradiation technology was to look at the accelerator and product handling systems as one integrated, not as two complimentary systems.

  1. Research on the Relationship Between Absorbed Slack and Technology Innovation

    Institute of Scientific and Technical Information of China (English)

    刘益; 方润生

    2003-01-01

    This paper divides the absorbed slack into dispersed slack and combined slack from the point of view of control right and analyzes the affection these two kinds of slacks have on the innovation. This research build a model of structural equation reflecting the relationship among the slack, absorbed capacity and innovation and proved this model with the data get from 607 enterprises by questionnaire. The result indicates that the dispersed slack and combined slack have positive relationship respectively with product innovation and process innovation and different slacks have some matching relationship with different absorptive capacities, which can result in different innovative output. This shows that the slack in Chinese enterprises can also promote the innovative output just like the western enterprises; so reducing the staff according to simple principles perhaps cannot be the most efficient way to improve the effectiveness in Chinese enterprises.

  2. Education, Science and Technology in Mexico: Challenges for Innovation

    Science.gov (United States)

    Gómez-Merino, Fernando Carlos; Trejo-Téllez, Libia Iris; Méndez-Cadena, María Esther; Hernández-Cázares, Aleida Selene

    2017-01-01

    The innovation process is founded on a high-quality education system at all levels, which trains scientists and technologists capable of generating innovations. Education is the most decisive factor in human development, yet in Mexico current statistics reveal a critical situation at every educational level, as only 1 out of every 10 children…

  3. Engineering innovation in healthcare: technology, ethics and persons.

    Science.gov (United States)

    Bowen, W Richard

    2011-01-01

    Engineering makes profound contributions to our health. Many of these contributions benefit whole populations, such as clean water and sewage treatment, buildings, dependable sources of energy, efficient harvesting and storage of food, and pharmaceutical manufacture. Thus, ethical assessment of these and other engineering activities has often emphasized benefits to communities. This is in contrast to medical ethics, which has tended to emphasize the individual patient affected by a doctor's actions. However technological innovation is leading to an entanglement of the activities, and hence ethical responsibilities, of healthcare professionals and engineering professionals. The article outlines three categories of innovation: assistive technologies, telehealthcare and quasi-autonomous systems. Approaches to engineering ethics are described and applied to these innovations. Such innovations raise a number of ethical opportunities and challenges, especially as the complexity of the technology increases. In particular the design and operation of the technologies require engineers to seek closer involvement with the persons benefiting from their work. Future innovation will require engineers to have a good knowledge of human biology and psychology. More particularly, healthcare engineers will need to prioritize each person's wellbeing, agency, human relationships and ecological self rather than technology, in the same way that doctors prioritize the treatment of persons rather than their diseases.

  4. Determinants of the pace of global innovation in energy technologies.

    Directory of Open Access Journals (Sweden)

    Luís M A Bettencourt

    Full Text Available Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to limited investment in public and private research and development (R&D. Here we build a comprehensive global database of energy patents covering the period 1970-2009, which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases, we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model reveals a regular relationship between patents, R&D funding, and growing markets across technologies, and accurately predicts patenting rates at different stages of technological maturity and market development. We show quantitatively how growing markets have formed a vital complement to public R&D in driving innovative activity. These two forms of investment have each leveraged the effect of the other in driving patenting trends over long periods of time.

  5. INNOVATIVE FOSSIL FUEL FIRED VITRIFICATION TECHNOLOGY FOR SOIL REMEDIATION

    Energy Technology Data Exchange (ETDEWEB)

    J. Hnat; L.M. Bartone; M. Pineda

    2001-10-31

    This Final Report summarizes the progress of Phases 3,3A and 4 of a waste technology Demonstration Project sponsored under a DOE Environmental Management Research and Development Program and administered by the U.S. Department of Energy National Energy Technology Laboratory-Morgantown (DOE-NETL) for an ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation''. The Summary Reports for Phases 1 and 2 of the Program were previously submitted to DOE. The total scope of Phase 3 was to have included the design, construction and demonstration of Vortec's integrated waste pretreatment and vitrification process for the treatment of low level waste (LLW), TSCA/LLW and mixed low-level waste (MLLW). Due to funding limitations and delays in the project resulting from a law suit filed by an environmental activist and the extended time for DOE to complete an Environmental Assessment for the project, the scope of the project was reduced to completing the design, construction and testing of the front end of the process which consists of the Material Handling and Waste Conditioning (MH/C) Subsystem of the vitrification plant. Activities completed under Phases 3A and 4 addressed completion of the engineering, design and documentation of the MH/C System such that final procurement of the remaining process assemblies can be completed and construction of a Limited Demonstration Project be initiated in the event DOE elects to proceed with the construction and demonstration testing of the MH/C Subsystem. Because of USEPA policies and regulations that do not require treatment of low level or low-level/PCB contaminated wastes, DOE terminated the project because there is no purported need for this technology.

  6. Innovation Technologies and Applications for Coastal Archaeological sites

    Science.gov (United States)

    Di Iorio, A.; Biliouris, D.; Guzinski, R.; Hansen, L. B.; Bagni, M.

    2015-04-01

    Innovation Technologies and Applications for Coastal Archaeological sites project (ITACA) aims to develop and test a management system for underwater archaeological sites in coastal regions. The discovering and monitoring service will use innovative satellite remote sensing techniques combined with image processing algorithms. The project will develop a set of applications integrated in a system pursuing the following objectives: - Search and location of ancient ship wrecks; - Monitoring of ship wrecks, ruins and historical artefacts that are now submerged; - Integration of resulting search and monitoring data with on-site data into a management tool for underwater sites; - Demonstration of the system's suitability for a service. High resolution synthetic aperture radar (TerraSAR-X, Cosmo-SkyMed) and multispectral satellite data (WorldView) will be combined to derive the relative bathymetry of the bottom of the sea up to the depth of 50 meters. The resulting data fusion will be processed using shape detection algorithms specific for archaeological items. The new algorithms, the physical modelling and the computational capabilities will be integrated into the Web-GIS, together with data recorded from surface (2D and 3D modelling) and from underwater surveys. Additional specific archaeological layers will be included into the WebGIS to facilitate the object identification through shape detection techniques and mapping. The system will be verified and validated through an extensive onground (sea) campaign carried out with both cutting edge technologies (side-scan sonar, multi beam echo sounder) and traditional means (professional scuba divers) in two test sites in Italy and Greece. The project is leaded by Planetek Hellas E.P.E. and include ALMA Sistemi sas for the "shape detection" and dissemination tasks, DHI-GRAS and Kell Srl for multispectral and SAR bathymetry. The complete consortium is composed by eleven partners and the project Kick-Off has been held in

  7. On Agricultural Scientific Research Institutions Supporting and Serving Technological Innovation Entities

    Institute of Scientific and Technical Information of China (English)

    Xiaoqiang; CHU; Bingqiang; XU; Hanchun; QIN; Guoyan; SHAN; Peiqun; LIN; Guixiu; HUANG

    2015-01-01

    This paper firstly analyzed current situation of agricultural technological innovation system in China and obstacles restricting agricultural enterprises to become technological innovation entities. It discussed exploration and practice of Chinese Academy of Tropical Agricultural Sciences in supporting and serving technological innovation entities. Finally,it came up with ideas and approaches for supporting and serving technological innovation entities in the new trend,to provide a new idea and practice for agricultural scientific research institute supporting and serving technological innovation entities.

  8. Innovative production technology ethanol from sweet sorghum

    Science.gov (United States)

    Kashapov, N. F.; Nafikov, M. M.; Gazetdinov, M. X.; Nafikova, M. M.; Nigmatzyanov, A. R.

    2016-06-01

    The paper considers the technological aspects of production of ethanol from nontraditional for Russian Federation crops - sweet sorghum. Presents the technological scheme of alcohol production and fuel pellets from sweet sorghum. Special attention is paid to assessing the efficiency of alcohol production from sweet sorghum. The described advantage of sugar content in stem juice of sweet sorghum compared with other raw materials. Allegedly, the use of the technology for producing alcohol from sweet sorghum allows to save resources.

  9. ASSESSING THE IMPACT OF UNIVERSITY TECHNOLOGY TRANSFER ON FIRMS’ INNOVATION

    OpenAIRE

    Paola Cardamone; Valeria Pupo; Fernanda Ricotta

    2014-01-01

    This paper analyses the influence of universities on Italian firms’ probability to innovate. Using firm-level data, we focus on institutionalised technology transfer (TT) activities in universities, namely spin-offs, patents and research contracts. Results show that TT activities play a significant role in the probability to innovate by Italian manufacturing firms located in the same province as the university. Nevertheless, the effect is not uniform: the contribution of university TT activit...

  10. Process of innovation in product lifecycle management business strategy

    Directory of Open Access Journals (Sweden)

    Valentina Gecevska

    2011-11-01

    Full Text Available This article proposes a scenario of Product Lifecycle Management (PLM, as a innovative business strategy based on the analysis of business drivers, industry requirements, limit of current solution, and recent state-of-the-art review in the domain related to PLM. Potential industrial impact of the developed PLM technology solutions is analyzed. It is hoped that the proposed PLM technology solutions will form the frontier basis for further research, development, and application of PLM systems to quickly adapt to the dynamic changing market for industry companies to pursue the most advanced competitiveness. This article presents a process oriented framework to support effective PLM implementation with a set of lifecycle oriented business process reference models which links the necessary fundamental concepts, enterprise knowledge and software solutions to effectively deploy PLM.

  11. Technology Innovation of Power Transmission Gearing in Aviation

    Science.gov (United States)

    Handschuh, Robert F.

    2009-01-01

    An overview of rotary wing evolution and innovations over the last 20 years was presented. This overview is provided from a drive system perspective. Examples of technology innovations that have changed and advanced drive systems of rotary wing vehicles will be provided. These innovations include full 6-axis CNC gear manufacture, face gear development to aerospace standards, health and usage monitoring, and gear geometry and bearing improvements. Also, an overview of current state-of-the-art activities being conducted at NASA Glenn is presented with a short look to fixed and rotary wing aircraft and systems needed for the future.

  12. What drives successful implementation of pollution prevention and cleaner technology strategy? The role of innovative capability.

    Science.gov (United States)

    Bhupendra, Kumar Verma; Sangle, Shirish

    2015-05-15

    Firms that are dynamic and prepared to implement environmental strategies have a potential competitive advantage over their industry counterparts. Therefore, it is important to understand, what capabilities are required to implement proactive environmental strategies. The paper discusses the attributes of innovative capability required by firms in order to adopt pollution prevention and cleaner technology strategies. Empirical results show that process and behavioral innovativeness are required by firms to implement a pollution prevention strategy. In addition to process and behavioral innovativeness, firms need a top management with high risk-taking ability as well as market, product, and strategic innovativeness to implement a cleaner technology strategy. The paper proposes some important managerial implications on the basis of the above research findings. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Mixing Methods in Innovation Research: Studying the Process-Culture-Link in Innovation Management

    Directory of Open Access Journals (Sweden)

    Jens O. Meissner

    2010-09-01

    Full Text Available Two trends in innovation management have influenced the basic idea of this paper. The first trend shows increased attempts by managers to utilize linear innovation processes derived from literature and from practice. The second trend is an increasing acceptance of the dynamics created in an "innovation culture," as being one of the key drivers of innovation. Both approaches partially contrast each other. Researching the literature in more detail, we found that studies explaining the link between innovation culture and innovation project management are rare. Indeed there is a study by Shona BROWN and Kathleen EISENHARDT (1995 which gives an excellent overview of innovation management research, but again the issue of "culture" was lacking. This missing link between innovation process design and innovation culture at the firm-level provides the theoretical framework of this paper. Behind the scenes of innovation management studies, we realized a methodological gap existed between the research of innovation cultures and their impact upon an organization's innovation processes. Thus, we applied a methodological mix of problem-centered interviews, structural analyses, and context analyses to study the phenomenon. We conducted an interview-based single case study in a Swiss telecommunications company. From these methodologies we created a themed landscape comprising relational topics of the innovation dynamics within an innovation project in the company (one year duration and briefly described each topic. The main finding in our study is the dynamic role-model that innovation managers in large service firms have to apply to succeed in their innovation management work. Thus, our methodological mix proved to be helpful, although some weaknesses remain to be solved in the future. URN: urn:nbn:de:0114-fqs1003134

  14. The changing environment for technological innovation in health care.

    Science.gov (United States)

    Goodman, C S; Gelijns, A C

    1996-01-01

    A distinguishing feature of American health care is its emphasis on advanced technology. Yet today's changing health care environment is overhauling the engine of technological innovation. The rate and direction of technological innovation are affected by a complex of supply- and demandside factors, including biomedical research, education, patent law, regulation, health care payment, tort law, and more. Some distinguishing features of technological innovation in health care are now at increased risk. Regulatory requirements and rising payment hurdles are especially challenging to small technology companies. Closer management of health care delivery and payment, particularly the standardization that may derive from practice guidelines and clamping down on payment for investigational technologies, curtails opportunities for innovation. Levels and distribution of biomedical research funding in government and industry are changing. Financial constraints are limiting the traditional roles of academic health centers in fostering innovation. Despite notable steps in recent years to lower regulatory barriers and speed approvals, especially for products for life-threatening conditions, the Food and Drug Administration is under great pressure from Congress, industry, and patients to do more. Technology gatekeeping is shifting from hundreds of thousands of physicians acting on behalf of their patients to fewer, yet more powerful, managed care organizations and health care networks. Beyond its direct effects on adoption, payment, and use of technologies, the extraordinary buying leverage of these large providers is cutting technology profit margins and heightening competition among technology companies. It is contributing to unprecedented restructuring of the pharmaceutical and medical device industries, leading to unprecedented alliances with generic product companies, health care providers, utilization review companies, and other agents. These industry changes are already

  15. Blockchain - an Innovation Technology of the Post-Industrial Economy

    Directory of Open Access Journals (Sweden)

    Arkhireiska Natalia V.

    2017-07-01

    Full Text Available The article is aimed at studying the innovation technology of the post-industrial economy - blockchain. It has been found that blockchain is a multifunctional and multi-level information technology designed to reliably account for different assets. It has been proved that the most important today is blockchain for Bitcoin. The article explores the opportunities, prospects and risks associated with investment in cryptocurrency. It has been determined that the main advantages of investment in Bitcoins are: steadily growing rate, confidence in currency, liquidity, anonymity, decentralization. However, there are significant downsides, such as: scaling problem, uncertainty about the status of the cryptocurrency on the part of the State, and excessive processing time for payments (approximately 10 minutes. It has been proved that the main benefits of Blockchain 1.0 and 2.0 are economic efficiency and cost savings through the use of decentralized network models, which do not require trust in a single transactional center, while Blockchain 3.0 is a freedom that will enable blockchain technology to implement solutions that are not related to monetary turnover and market transactions.

  16. Improving primary health care through technological innovation.

    NARCIS (Netherlands)

    Groenewegen, P.P.; Hutten, J.B.F.

    1989-01-01

    As a result of policy changes and developments on the demand side, the importance of technology in primary health care will grow fast. An approach to the implementation of new technologies in primary health care is presented in this article. First we describe the main problems in Dutch primary healt

  17. Rural Schools and Technology: Connecting for Innovation

    Science.gov (United States)

    Barter, Barbara

    2013-01-01

    Placed within the context of rural teaching and learning and the use of new technologies, this paper presents a comparative study of three technological approaches to the presentation of curriculum in schools. Supported by three different research projects in one Canadian province, it highlights three areas of e-learning: the use of video…

  18. Do External or Internal Technology Spillovers Have a Stronger Influence on Innovation Efficiency in China?

    Directory of Open Access Journals (Sweden)

    Xionghe Qin

    2017-09-01

    Full Text Available In this study, we bridge an important gap in the literature by comparing the extent to which external technology spillovers, as indicated by foreign direct investment (FDI, and internal technology spillovers, as indicated by university-institute-industry cooperation (UIC, influence innovation efficiency in China. We divide the innovation process into two sequential stages, namely the knowledge creation and technology commercialization stages, and employ a network data envelopment analysis approach to measure innovation efficiency at each stage. The spatial analysis of the distribution of knowledge creation efficiency and technology commercialization efficiency reveals the heterogeneity of innovation efficiency at the provincial level. Then, a panel data regression is used to analyze the effect of FDI and UIC on innovation efficiency at each stage, using data from 2009 to 2015 for 30 provinces in China. By comparing FDI with UIC, we find that FDI has a higher coefficient and stronger significance level at the knowledge creation stage, while only industry-institute linkages exhibit a stronger association with innovation efficiency at the technology commercialization stage.

  19. Technological innovation capability in Malaysian-owned resource-based manufacturing companies: Early findings

    Science.gov (United States)

    Razali, Nur Fhathyhah; Mohd Suradi, Nur Riza; Ahmad Shahabuddin, Faridatul Azna; Ismail, Wan Rosmanira; Abidin, Norkisme Zainal; Ahmad, Nor Amalina; Mustafa, Zainol

    2013-04-01

    This study aims to identify the determinants of technological innovation capability of Malaysian-owned companies in the resources-based manufacturing, to identify the relationship between technological innovation capability (TIC) and technological innovation performance (TIP) for the resource-based manufacturing. Furthermore, this study also aims to identify innovation capability factors that need more emphasis and improvements from the respective authority. The scope of the study covers four industries which are petrochemical industries, pharmaceutical industries, palm oil-based industries and food processing industries which are located in the state of Selangor. Descriptive analysis, correlation analysis and performance capability analysis were used in this study. It was found that, technological innovation capabilities (TIC) for companies in the resource-based manufacturing are moderate. Factors such as policies capability, human resources capability and facilities capability have a positive relationship with the performance of technological innovation (TIP). These findings will help the government in making decisions and better implementation of policies to strengthen the competitiveness of the company, particularly in resource-based manufacturing.

  20. Enhancing technological innovation in small firms: Role of collaboration

    Science.gov (United States)

    Singh, D.; Khamba, J. S.; Nanda, T.

    2014-07-01

    Contribution of Micro-Small and Medium Enterprises (MSMEs) is highly remarkable in the overall industrial economy of the country. In recent years, the MSME sector has consistently registered higher growth rate compared to the overall industrial sector. With its agility and dynamism, the sector has shown admirable innovativeness and adaptability to survive the recent economic downturn and recession. However, MSMEs growth rate is still at low level. Therefore, it becomes essential for organizations to adopt new technologies or upgrade existing setup to meet continuously changing global market and fulfill customer needs. This paper explores the relationships between different collaboration networks and technological innovation of small firms through an extensive review of literature. The study finds that collaboration with larger enterprises, R&D institutions, universities and government agencies play a significant role in enhancing technological innovation in small firms.

  1. Organizational Ambidexterity: How Small Technology Firms Balance Innovation and Support

    Directory of Open Access Journals (Sweden)

    Alem Legesse

    2012-02-01

    Full Text Available Many technology entrepreneurs start their companies by focusing on an innovation that creates a market offer to attract their first customers. When the entrepreneur’s firm makes its first sale, the dynamics of the organization change and the entrepreneur faces a new challenge: how can the firm concurrently develop new products and support existing customers? This problem is of great concern to entrepreneurs who own small technology firms and is the subject of this article. In this article, we first address the innovate-versus-support dilemma that small technology firms face early in their lifecycles. Next, we describe the paradigm of the ambidextrous organization. We conclude with a discussion of five mechanisms small firms can use to achieve balance in their quest to concurrently satisfy the need to innovate while fulfilling the demands of existing clients and products.

  2. Project and Innovation Management in New Product Development Processes

    DEFF Research Database (Denmark)

    Henriksen, Leif; Gayretli, Ahmet

    2010-01-01

    to product design processes like inefficient project management, increasing product complexity, conflict management, shortfall of existing methods and tools, and high failures in new product introduction. A new approach has been proposed for a system based platform, which consist of a product platform......Although the process of innovation is one of the most important drivers behind the growth and prosperity of today’s global economy, it is one of the least understood. This paper aims to address specific problems in carrying out new product development processes. There are crucial issues related......, a process platform, and a technology platform. Even if there is no single solution to these complex problems the proposed method can offer a more structured way of attacking the issues....

  3. Innovative development of mesosystems in the sphere of chemical technology (by the example of Tatarstan Republic

    Directory of Open Access Journals (Sweden)

    Chulpan A. Misbakhova

    2017-03-01

    Full Text Available Objective to identify the peculiarities of innovative development of mesosystems basing on the systematization of practical experience of Tatarstan Republic and to conduct the economicmathematical modeling. Methods systemic analysis description and generalization component and factor analysis. Results the author substantiates the necessity of development and modernization of petrochemical plants as one of the most important sectors of Russian industry. It is stated that the development of petrochemical wastesrsquo processing technologies flexible production technologies as well as the creation of energy efficient and ecologically safe technologies of oil refining requires substantial revision of approaches to innovations implementation and financing. The article shows that despite the large number of hightech industries Russia ranks only 20 among developed countries by the level of spending on research and development. The analysis carried out on the basis of statistical data for the Republic of Tatarstan showed that the petrochemical complex occupies the leading position in the regional economy while demonstrating higher efficiency compared to other industries. The main institutions for the petrochemical industry development in the Republic have been defined including Tekhnopolis quotKhimgradquot quotRegional center of engineering in the sphere of chemical technologiesquot JSC and others. To assess the development of the national innovation system the innovation diffusion factors were studied and systematized. 16 indicators of research and innovation activities in the Republic of Tatarstan for 20102014 were selected which were then grouped into four integrated categories intellectual activity research and development innovation activity of small businesses and innovation outcomes. Factor analysis determined their contribution to the process of the innovations diffusion at the level of 86 . Scientific novelty the model of innovation diffusion at

  4. A patent survey case: how could technological forecasting help cosmetic chemists with product innovation?

    Science.gov (United States)

    Domicio Da Silva Souza, Ivan; Juliana Pinheiro, Bárbara; Passarini Takahashi, Vania

    2012-01-01

    Patents represent a free and open source of data for studying innovation and forecasting technological trends. Thus, we suggest that new discussions about the role of patent information are needed. To illustrate the relevance of this issue, we performed a survey of patents involving skin care products, which were granted by the United States Patent and Trademark Office (USPTO) between 2006 and 2010, to identify opportunities for innovation and technological trends. We quantified the use of technologies in 333 patents. We plotted a life cycle of technologies related to natural ingredients. We also determined the cross impact of the technologies identified. We observed technologies related to processes applied to cosmetics (2.2%), functional packaging and applicators (2.9%), excipients and active compounds (21.5%), and cosmetic preparations (73.5%). Further, 21.6% of the patents were related to the use of natural ingredients. Several opportunities for innovation were discussed throughout this paper, for example, the use of peptides as active compounds or intracellular carriers (only 3.9% of the technologies in cosmetic preparations). We also observed technological cross impacts that suggested a trend toward multifunctional cosmetics, among others. Patent surveys may help researchers with product innovation because they allow us to identify available and unexplored technologies and turn them into whole new concepts.

  5. Social impacts of the development of science, technology and innovation indicators

    OpenAIRE

    Gault, F.

    2011-01-01

    This paper examines the social impacts of the development of science, technology and innovation indicators. The approach deals separately with the development process and with the use of the indicators that result. Underlying the discussion is an assumption that indicators are a technology, a product, which governs behaviour, is modified by users (outside of the producer community), and develops in response to user needs. Science and technology indicators are considered separately from innova...

  6. FY10 Engineering Innovations, Research and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

    2011-01-11

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but

  7. IDEA MANAGEMENT IN THE INNOVATION PROCESS

    Directory of Open Access Journals (Sweden)

    Cătălin George ALEXE

    2014-12-01

    Full Text Available The employees of a company often want to make themselves useful and to make life easier at work by providing potentially useful ideas, aimed at eliminating problems or to exploit the opportunities. Without the ability to obtain new ideas, an organization stagnates, declines and eventually is eliminated by the competitors who have new ideas. To materialize the idea into an innovative product, it is desirable that it corresponds to the company's goals to be achieved with the existing technology and resources in order to reduce the investments. Thus, it appeared the need for an idea management to bring order in the set of ideas and to create a transparent and effective mode in attracting and management of these ideas. This paper proposes, starting from a number of scientific approaches in the literature, to address to the idea management as a complex model and to identify which are those dedicated IT solutions that could help going over various phases and sub-phases of such a complex model, particularly useful for the management of a company.

  8. 75 FR 33268 - Technology Innovation Program (TIP) Notice of Availability of Funds; Amendment

    Science.gov (United States)

    2010-06-11

    ... National Institute of Standards and Technology Technology Innovation Program (TIP) Notice of Availability... solicitation of proposals for the fiscal year 2010 Technology Innovation Program (TIP) competition. NIST is... National Institute of Standards and Technology, Technology Innovation Program, 100 Bureau Drive, Stop 4750...

  9. 77 FR 46909 - Small Business Innovation Research (SBIR) Program and Small Business Technology Transfer (STTR...

    Science.gov (United States)

    2012-08-06

    ... Innovation Research (SBIR) Program and Small Business Technology Transfer (STTR) Program Policy Directives... Small Business Innovation Research (SBIR) and Small Business Technology Transfer Program (STTR) Policy... technology@sba.gov . SUPPLEMENTARY INFORMATION: I. Background Information SBA is publishing Policy Directives...

  10. 78 FR 20359 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    Science.gov (United States)

    2013-04-04

    ... SPACE ADMINISTRATION NASA Advisory Council; Technology and Innovation Committee; Meeting AGENCY... and Space Administration (NASA) announces a meeting of the Technology and Innovation Committee of the... Technology Mission Directorate programs; status of activities within the Office of the Chief...

  11. 77 FR 40646 - NASA Advisory Council; Technology and Innovation Committee; Meeting Amendment

    Science.gov (United States)

    2012-07-10

    ... SPACE ADMINISTRATION NASA Advisory Council; Technology and Innovation Committee; Meeting Amendment... Aeronautics and Space Administration (NASA) announces a meeting of the Technology and Innovation Committee of... Technologist Update. --Status of NASA's Space Technology Program. --Briefing and Review of NASA's...

  12. 76 FR 68167 - National Medal of Technology and Innovation Nomination Evaluation Committee Meeting

    Science.gov (United States)

    2011-11-03

    ...-2011-0069] National Medal of Technology and Innovation Nomination Evaluation Committee Meeting AGENCY... of Technology and Innovation (NMTI) Nomination Evaluation Committee will meet in closed session on.... FOR FURTHER INFORMATION CONTACT: Vikrum Aiyer, Program Manager, National Medal of Technology...

  13. Innovative technologies for greenhouse gas emission reduction in steel production

    Directory of Open Access Journals (Sweden)

    D. Burchart-Korol

    2016-01-01

    Full Text Available The main goal of the study was to present the most significant technological innovations aiming at reduction of greenhouse gas emission in steel production. Reduction of greenhouse gas and dust pollution is a very important aspect in the iron and steel industry. New solutions are constantly being searched for to reduce greenhouse gases (GHG. The article presents the most recent innovative technologies which may be applied in the steel industry in order to limit the emission of GHG. The significance of CCS (CO2 Capture and Storage and CCU (CO2 Capture and Utilization in the steel industry are also discussed.

  14. Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

  15. Patented Biologically-inspired Technological Innovations: A Twenty Year View

    Institute of Scientific and Technical Information of China (English)

    Richard H. C. Bonser

    2006-01-01

    Publication rate of patents can be a useful measure of innovation and productivity in fields of science and technology. To assess the growth in industrially-important research, I conducted an appraisal of patents published between 1985 and 2005 on online databases using keywords chosen to select technologies arising as a result of biological inspiration. Whilst the total number of patents increased over the period examined, those with biomimetic content had increased faster as a proportion of total patent publications. Logistic regression analysis reveals that we may be a little over half way through an initial innovation cycle inspired by biological systems.

  16. RELATIONSHIP MARKETING IN THE INNOVATION PROCESSES

    OpenAIRE

    Rodica Boier

    2014-01-01

    Inspired from the context of business-to-business markets, relationship marketing in the context of innovation have been expanded more and more to the consumer markets as well. The paper starts with a review of several most relevant studies on relationship marketing-innovation topic, from the first references to the current complex approaches. The effective stakeholder involvement in the value creation provides a more fertile ground for further successful innovations. All of the variables gen...

  17. INNOVATIVE FOSSIL FUEL FIRED VITRIFICATION TECHNOLOGY FOR SOIL REMEDIATION

    Energy Technology Data Exchange (ETDEWEB)

    J. Hnat; L.M. Bartone; M. Pineda

    2001-07-13

    This Summary Report summarizes the progress of Phases 3, 3A and 4 of a waste technology Demonstration Project sponsored under a DOE Environmental Management Research and Development Program and administered by the U.S. Department of Energy National Energy Technology Laboratory-Morgantown (DOE-NETL) for an ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation''. The Summary Reports for Phases 1 and 2 of the Program were previously submitted to DOE. The total scope of Phase 3 was to have included the design, construction and demonstration of Vortec's integrated waste pretreatment and vitrification process for the treatment of low level waste (LLW), TSCA/LLW and mixed low-level waste (MLLW). Due to funding limitations and delays in the project resulting from a law suit filed by an environmental activist and the extended time for DOE to complete an Environmental Assessment for the project, the scope of the project was reduced to completing the design, construction and testing of the front end of the process which consists of the Material Handling and Waste Conditioning (MH/C) Subsystem of the vitrification plant. Activities completed under Phases 3A and 4 addressed completion of the engineering, design and documentation of the Material Handling and Conditioning System such that final procurement of the remaining process assemblies can be completed and construction of a Limited Demonstration Project be initiated in the event DOE elects to proceed with the construction and demonstration testing of the MH/C Subsystem.

  18. The NIHR Invention for Innovation (i4i) Programme: A Review of Progress and Contributions to Innovation in Healthcare Technologies.

    Science.gov (United States)

    Marjanovic, Sonja; Krapels, Joachim; Sousa, Sonia; Castle-Clarke, Sophie; Horvath, Veronika; Chataway, Joanna

    2015-11-30

    The National Institute for Health Research (NIHR) Invention for Innovation (i4i) programme supports the development of innovative medical technologies for patient benefit. The i4i product development stream involves collaborative projects between at least two partners from academia, the NHS and industry. Medical technology innovators apply for funding for one to three years, through a peer review-based process that includes presentation to a selection panel. The funding and business advice provided by i4i support the development of early-stage innovations, generally at proof of concept and prototype stages. Since its inception the product development stream has identified and supported 170 projects, led by 146 principal investigators (PIs). RAND Europe evaluated the programme, with the aim of identifying its outputs and impacts and examining the factors influencing performance. The evaluation findings should help inform the future of the programme. The evaluation used a multi-method approach, including a focused review of background information from i4i, scoping interviews with key informants, a survey of programme participants and case studies of projects representing diverse technologies and health needs.

  19. Nature's powerhouse. Innovative technologies for a more sustainable future; Kraftwerk Natur. Innovative Technologien fuer mehr Nachhaltigkeit

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2013-09-01

    Across the globe, our hunger for energy continues to grow. Yet climate change and dwindling fossil fuel supplies are forcing us to rethink our energy policy and turn increasingly to renewable resources. Achieving a sustainable energy mix and eco-friendly mobility options demands innovative technologies. And that is where Linde's gas and plant engineering specialists come in, developing efficient processes and providing crucial momentum for a greener future. (orig.)

  20. Technology transfer within the telecare technology innovation system

    NARCIS (Netherlands)

    Vlies, R.D. van der; Felix, E.

    2013-01-01

    Telecare technology is not common yet, although it is perceived as promising. Most studies on telecare technology transfer present a case involving the use of a single methodology and approach during some steps of technology transfer. Technology transfer models cannot be sensibly constructed if they

  1. The nature of innovation processes in Facility Management services

    DEFF Research Database (Denmark)

    Nardelli, Giulia

    Purpose: This work investigates the dynamics of interaction between stakeholders of Facilities Management (FM) innovation and improvement processes. The aim is to understand how the complex value chain of FM services influences innovation processes within this field. Theory: This study combines...... theories on innovation in services with research focused on the empirical field of FM. More specifically, the analytical framework for this study applies the differentiation between reactive and proactive innovation processes by Toivonen and Tuominen (2009) to the value chain identified by Coenen...... has a threefold impact on the nature of innovation processes within this field. Firstly, end-users of FM services are usually not involved in innovation processes, although they might sometimes play a role as initial drivers. Secondly, FM services are intangible but more easily reproducible than other...

  2. Nurses' adoption of technology: application of Rogers' innovation-diffusion model.

    Science.gov (United States)

    Lee, Ting-Ting

    2004-11-01

    This qualitative study applied Everett Rogers' innovation-diffusion model to analyze nurses' perceptions toward using a computerized care plan system. Twelve nurses from three respiratory intensive care units in Taiwan voluntarily participated in a one-on-one, in-depth interview. Data were analyzed by constant comparative analysis. The content that emerged was compared with the model's five innovation characteristics (relative advantage, compatibility, complexity, trialability, and observability), as perceived by new users. Results indicate that Rogers' model can accurately describe nurses' behavior during the process of adopting workplace innovations. Related issues that emerged deserve further attention to help nurses make the best use of technology.

  3. New information technologies for an innovative education

    Directory of Open Access Journals (Sweden)

    Ion Smeureanu

    2011-12-01

    Full Text Available Information technology has a powerful impact on learning and the central idea of the current e-learning technologies is to provide users the ability to use and reuse of learning objects, which must be compatible with the learning management systems and with any other future technology from that field. The success of new learning technologies is related to student-centered learning approach, on skills which will be acquired as a result of learning. Their establishment is in close accordance with the didactic objectives of teaching the lessons. From informatics point of view the content to be taught in terms of components-based learning, which the existing software components are assembled into an application in such a way that they interact to get a predefined functionality. The components can react depending on the architecture where they are assembled. According to semantic model, the learning components can be assembled by manually, so as to provide a great opportunity for both students and teachers to exercise their creativity and vision. New information technologies, as component-oriented programming or service-oriented architecture, allow the easy handling and composition of learning objects even by non specialists, teachers who prepare their lessons according to their vision, or students who can practice the knowledge acquired solving the variants of problems studied.

  4. US hospital payment adjustments for innovative technology lag behind those in Germany, France, and Japan.

    Science.gov (United States)

    Hernandez, John; Machacz, Susanne F; Robinson, James C

    2015-02-01

    Medicare pioneered add-on payments to facilitate the adoption of innovative technologies under its hospital prospective payment system. US policy makers are now experimenting with broader value-based payment initiatives, but these have not been adjusted for innovation. This article examines the structure, processes, and experience with Medicare's hospital new technology add-on payment program since its inception in 2001 and compares it with analogous payment systems in Germany, France, and Japan. Between 2001 and 2015 CMS approved nineteen of fifty-three applications for the new technology add-on payment program. We found that the program resulted in $201.7 million in Medicare payments in fiscal years 2002-13-less than half the level anticipated by Congress and only 34 percent of the amount projected by CMS. The US program approved considerably fewer innovative technologies, compared to analogous technology payment mechanisms in Germany, France and Japan. We conclude that it is important to adjust payments for new medical innovations within prospective and value-based payment systems explicitly as well as implicitly. The most straightforward method to use in adjusting value-based payments is for the insurer to retrospectively adjust spending targets to account for the cost of new technologies. If CMS made such retrospective adjustments, it would not financially penalize hospitals for adopting beneficial innovations. Project HOPE—The People-to-People Health Foundation, Inc.

  5. Innovation technology in the initial training of children by the example of sport games

    Directory of Open Access Journals (Sweden)

    Ruslana Sushko

    2015-04-01

    Full Text Available Purpose: to determine the characteristics of innovative technologies and the current state of organizational work with children at the initial stage of training in sports. Material and Methods: to understand the application of innovative technologies used coaches poll and summarized expert assessment specialists in the field of sports. Results: the current state of the question concerning the possibility of the initial training of children in early specialization in sports for example basketball, volleyball and tennis. Clarified the importance and necessity of innovative activities for children at the initial stage of training in sports. Conclusions: the identified innovative approaches for constructing the process of initial training in tennis, which are not observed in other kinds of sports.

  6. People, Politics, and Innovation: A Process Perspective

    NARCIS (Netherlands)

    L. Alexander (Lameez)

    2014-01-01

    markdownabstract__Abstract__ Innovation is often considered the Holy Grail of competitive advantage and growth in modern organizations. Organizing for innovation can therefore be seen as the cornerstone of organizational success. In this dissertation, I aimed to advance a more complex and

  7. People, Politics, and Innovation: A Process Perspective

    NARCIS (Netherlands)

    L. Alexander (Lameez)

    2014-01-01

    markdownabstract__Abstract__ Innovation is often considered the Holy Grail of competitive advantage and growth in modern organizations. Organizing for innovation can therefore be seen as the cornerstone of organizational success. In this dissertation, I aimed to advance a more complex and dynamic

  8. Innovations in Telecommunications Technology: Implications for Education.

    Science.gov (United States)

    Korman, Frank

    A survey of literature and information sources disclosed the overall trends for telecommunications technology in education. This report describes both hardware and software aspects of these trends. Hardware trends include microminiaturization, increased message transmission capacity, interactive information flow, more complex and complete…

  9. Promoting Innovative Methods in Technology Education

    Science.gov (United States)

    Al-Nasra, Moayyad M.

    2012-01-01

    The engineering profession is very sensitive to the new changes in the engineering job market demand. The engineering job market is changing in a much faster rate than the engineering/engineering technology education. A 13-year study will be presented. The study focuses on the factors affecting the survival rate, student academic performance,…

  10. Using Videotape Technology: Innovations in Behavioral Research.

    Science.gov (United States)

    Niebuhr, Robert E.; And Others

    1981-01-01

    Reviews present and potential uses of videotape technology in behavioral research. Emphasis is placed on research methodology and the value of incorporating videotape in current research practices, including behavior observation studies, in modeling research, and in perceptual attribution investigations. Concludes with an analysis of advantages…

  11. Innovative Mechanical Engineering Technologies, Equipment and Materials-2013

    Science.gov (United States)

    Ilnaz Izailovich, Fayrushin; Nail Faikovich, Kashapov; Mahmut Mashutovich, Ganiev

    2014-12-01

    In the period from 25 to 27 September 2013 the city of Kazan hosted the International Scientific Conference "Innovative mechanical engineering technologies, equipment and materials - 2013" (IRTC "IMETEM - 2013"). The conference was held on the grounds of "Kazanskaya Yarmarka" (Kazan). The conference plenary meeting was held with the participation of the Republic of Tatarstan, breakout sessions, forum "Improving the competitiveness and efficiency of engineering enterprises in the WTO" and a number of round tables. Traditionally, the event was followed by the 13th International specialized exhibition "Engineering. Metalworking. Kazan ", in which were presented the development of innovative enterprises in the interests of the Russian Federation of Industry of Republic of Tatarstan, to support the "Foundation for Assistance to Small Innovative Enterprises in Science and Technology" and the 8th specialized exhibition "TechnoWelding". Kashapov Nail, D.Sc., professor (Kazan Federal University)

  12. Innovative cold joining technologies based on tube forming

    Directory of Open Access Journals (Sweden)

    Alves Luis M.

    2015-01-01

    Full Text Available This paper is focused on innovative cold joining technologies for connecting tubes and fixing tubes to sheets. The proposed technologies are based on the utilization of plastic instability waves in thin-walled tubes subjected to axial compression and may be seen as an alternative to conventional joining technologies based on mechanical fixing with fasteners, welding and structural adhesive bonding. Besides allowing connecting dissimilar materials and being successfully employed in fixture conditions that are difficult and costly to achieve by means of conventional joining the new proposed technologies also cope with the growing concerns on the demand, lifecycle and recycling of materials.

  13. Fostering Innovation through Physics, 52 Technologies, and Wide Participation

    Science.gov (United States)

    Tagg, Randall

    2015-03-01

    We have created in a single site a workspace called the Innovation Hyperlab. It organizes 52 technologies into 3-technology work bays and houses appropriate supplies, tools, and instrumentation. Key to the operation is a supporting web site (for open release in summer 2015) with modular instruction in individual technologies. The instruction emphasizes underlying physical principles but provides direct engagement with key devices and methods in a given technology. The aim is to support learning on-demand in the midst of design projects as well as formal courses. The physical and virtual sides of the lab are designed to serve a wide range of participants, from high school students to graduate students. Most experience to date has been through using the space to support undergraduate-mentored high school student research and innovation teams pursuing projects as wide ranging as helicopter rescue and neurological rehabilitation.

  14. A Systematic Analysis of Innovation Studies: A Proposed Framework on Relatioship Between Innovation Process and Firm's Performance

    Directory of Open Access Journals (Sweden)

    Suriati Binti Zainal Abidin

    2012-01-01

    Full Text Available Innovation has been discussed in a broad field. Scholars have defined and discussed innovation in various forms and perspectives. Whether empirical or conceptual, the discussions have delineated innovation in various perspectives such as organizational innovation, newness, innovation management, innovation as interactive model and types of innovation. In fact, due to the competitive environment, innovation is crucial and has become a niche for firm’s performance. This paper aims to provide a systematic analysis and propose framework that emphasizes on investigating the relationship between innovation and firm performance. Based on literature review, this paper proposes six constructs which can be used to examine the innovation implementation at firm level. The constructs are leadership, managerial levers, business processes, innovation process, innovation outcome and firm performance. Keywords: innovation, innovation outcomes, firm performance

  15. Theory Building- Towards an understanding of business model innovation processes

    DEFF Research Database (Denmark)

    Taran, Yariv; Boer, Harry; Lindgren, Peter

    2009-01-01

    researchers' and practitioners' perspectives as to how the process of business model innovation can be realized. By using various researchers' perspectives and assumptions, we identify relevant inconsistencies, which consequently lead us to propose possible supplementary solutions. We conclude our paper...... by proposing a generic process to business model innovation, supported by risk management processes. .......Companies today, in some industries more than others, invest more capital and resources just to stay competitive, develop more diverse solutions, and increasingly start to think more radically, when considering to innovate their business model. However, the development and innovation of business...

  16. New Technological Waves Promote Innovation and Integration in Service Outsourcing

    Institute of Scientific and Technical Information of China (English)

    Yang Ting

    2011-01-01

    @@ New technologies represented by cloud computing will lead innovations in delivery mode and pricing mode of service outsourcing.Virtual allocation of service resources can help improve service providers' service capacity and profitability.Cloud platform will boost the delivery efficiency and effect of service outsourcing.The establishment of cloud-based service outsourcing trading platform can promote the efficiency of service trade.In the future, cloud technology and cloud platform will become more popular in service outsourcing industry.

  17. FY2011 Engineering Innovations, Research, and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Kip [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martz, Harry E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Poyneer, Lisa A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Shusteff, Maxim [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Spadaccini, Christopher M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hopkins, Jonathan B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bernier, Joel V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); King, Michael J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Puso, Michael A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Weisgraber, Todd H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Goldstein, Noah C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sales, Ana Paula De Oliveira [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dehlinger, Dietrich A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotovsky, Jack [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kuntz, Joshua D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Voss, Lars F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wheeler, Elizabeth K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chang, John T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lehman, Sean K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Vernon, Stephen P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tang, Vincent [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-04-24

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory’s Engineering Directorate for FY2011. These efforts exemplify Engineering’s nearly 60-year history of developing and applying the technology innovations needed for the Laboratory’s national security missions, and embody Engineering’s mission to “Enable program success today and ensure the Laboratory’s vitality tomorrow.

  18. Determinants of the Pace of Global Innovation in Energy Technologies

    Science.gov (United States)

    2013-10-14

    has increased signifi- cantly in recent years (Figure S1 in File S1). Moreover, patent citations (a proxy for patent impact or quality [13,20]) have...however, prove relevant to the development of other technologies and to general theories of technological innovation. Materials and Methods Patent Data... bibliometric advantages of using keyword searches rather than patent codes or classes, including complete- ness, accuracy, and consistency across patent

  19. Social innovation to reduce the gap between innovative assistive technology and people living with dementia

    NARCIS (Netherlands)

    Snaphaan, L.; Lubbe-Verhaegh, E. van der; Gastel, L. van; Wouters, Eveline; Bongers, I.

    2016-01-01

    Purpose Currently, most technology (robotics, smart homes, etc) that has been developed for the healthcare sector are difficult in use, expensive and often not affordable for individual persons in their home situation. Affordable innovations that activate people instead of taking tasks over can be a

  20. Innovation capabilities in food and beverages and technology-based innovation projects

    NARCIS (Netherlands)

    Tepic, M.; Fortuin, F.T.J.M.; Kemp, R.G.M.; Omta, S.W.F.

    2014-01-01

    Purpose - The aim of this paper is to establish the differences between the food and beverages (F&B) and technology-based industries with regards to the relation between previously identified success factors and innovation project performance. Design/methodology/approach - These differences are