WorldWideScience

Sample records for technology fair project

  1. 5th China Fujian Technology And Projects Fair

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Fifth China (Fujian) Technology and Projects Fair (CFTPF), which was held on June 18-20 in Fuzhou, capital of Fujian Province, proved a big success, allowing an increasing number of businesses to participate and find new opportunities. In three days,

  2. Environmental Science: 49 Science Fair Projects. Science Fair Projects Series.

    Science.gov (United States)

    Bonnet, Robert L.; Keen, G. Daniel

    This book contains 49 science fair projects designed for 6th to 9th grade students. Projects are organized by the topics of soil, ecology (projects in habitat and life cycles), pests and controls (projects in weeds and insects), recycling (projects in resources and conservation), waste products (projects in decomposition), microscopic organisms,…

  3. FAIR project at GSI

    Science.gov (United States)

    Kester, Oliver; Spiller, Peter; Stoecker, Horst

    FAIR -- the Facility for Antiproton and Ion Research in Europe -- constructed at GSI Helmholtzzentrum für Schwerionenforschung GmbH in Darmstadt comprises an international centre of heavy ion accelerators that will drive heavy ion and antimatter research (FBTR, 2006). FAIR will provide worldwide unique accelerator and experimental facilities allowing a large variety of fore-front research in physics and applied science. FAIR will deliver antiproton and ion beams of unprecedented intensities and qualities. The main part of the FAIR facility is a sophisticated and cost efficient accelerator system, which delivers parallel beams to different experiments of the FAIR experimental collaborations -- APPA, NuSTAR, CBM and PANDA. The accelerated primary beams will then be employed to create new, often highly exotic particles in a series of parallel experimental programs. Experiments with exotic particles will explore fundamental processes which are expected to have taken place in the early phases and still happen in the on-going evolution of the Universe. These processes produced the basic constituents of matter and overall structure we observe today...

  4. Conservation Science Fair Projects.

    Science.gov (United States)

    Soil Conservation Society of America, Ankeny, IA.

    Included are ideas, suggestions, and examples for selecting and designing conservation science projects. Over 70 possible conservation subject areas are presented with suggested projects. References are cited with each of these subject areas, and a separate list of annotated references is included. The references pertain to general subject…

  5. Science Fair Projects: The Environment.

    Science.gov (United States)

    Bonnet, Bob; Keen, Dan

    This book approaches the development of science fair projects from the point of view that science should be enjoyable, interesting, and thought-provoking. The scientific concepts introduced here will later help young students to understand more advanced scientific principles. These projects develop skills such as classification, making measured…

  6. Low-Cost Composite Technology for Large Rocket Payload Fairings Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Commission on the Future of the U.S. Aerospace Industry states that reducing the cost to orbit is an essential ingredient for progress. This Phase I project will...

  7. Science Fair Project Index 1981-1984.

    Science.gov (United States)

    Bishop, Cynthia, Ed.; Crowe, Deborah, Ed.

    This second supplement to the "Science Fair Project Index 1960-1972" indexes science projects and experiments found in books and magazines published from 1981 through 1984. This index is intended for use by students in grade five through high school and by teachers who are involved in creating science fair projects. Emphasis is on actual projects,…

  8. Science Fair Project Index 1973-1980.

    Science.gov (United States)

    Akron - Summit County Public Library, OH.

    This supplement to the "Science Fair Project Index 1960-1972" indexes science projects and experiments found in books and magazines published from 1973 through 1980. This index is intended for use by students in grade five through high school and by teachers who are involved in creating science fair projects. Emphasis is on actual projects,…

  9. Science Fair Project Index 1981-1984.

    Science.gov (United States)

    Bishop, Cynthia, Ed.; Crowe, Deborah, Ed.

    This second supplement to the "Science Fair Project Index 1960-1972" indexes science projects and experiments found in books and magazines published from 1981 through 1984. This index is intended for use by students in grade five through high school and by teachers who are involved in creating science fair projects. Emphasis is on actual projects,…

  10. Science Fair Project Index 1973-1980.

    Science.gov (United States)

    Akron - Summit County Public Library, OH.

    This supplement to the "Science Fair Project Index 1960-1972" indexes science projects and experiments found in books and magazines published from 1973 through 1980. This index is intended for use by students in grade five through high school and by teachers who are involved in creating science fair projects. Emphasis is on actual projects,…

  11. Science Fair Scene: Turning Ideas into Projects.

    Science.gov (United States)

    McQueen, David R.

    1991-01-01

    Outlines the steps necessary to conduct a science fair project and examines two specific examples of how a basic idea for a science fair topic can be followed to its completion. Provides examples of day-to-day operational science in a basic botany project and a lunar geography project. (JJK)

  12. NEW IDEAS FOR SCIENCE FAIR PROJECTS.

    Science.gov (United States)

    FARMER, ROBERT A.; SAWYER, ROGER WILLIAMS

    THIS GUIDE FOR THE SCIENCE FAIR PARTICIPANTS BEGINS WITH A CHAPTER ON THE NATURE OF SCIENCE, AND THE SCIENCE FAIR, AND CONTINUES THROUGH THE FIVE CHAPTERS OF PART ONE, PLANNING AND EXECUTING YOUR PROJECT, TO EXPLAIN THE DETAILS INVOLVED IN SELECTING, DEVELOPING, AND EXHIBITING A PROJECT. PART II OF THE VOLUME CONSIDERS THE STRUCTURE OF SCIENCE…

  13. NEW IDEAS FOR SCIENCE FAIR PROJECTS.

    Science.gov (United States)

    FARMER, ROBERT A.; SAWYER, ROGER WILLIAMS

    THIS GUIDE FOR THE SCIENCE FAIR PARTICIPANTS BEGINS WITH A CHAPTER ON THE NATURE OF SCIENCE, AND THE SCIENCE FAIR, AND CONTINUES THROUGH THE FIVE CHAPTERS OF PART ONE, PLANNING AND EXECUTING YOUR PROJECT, TO EXPLAIN THE DETAILS INVOLVED IN SELECTING, DEVELOPING, AND EXHIBITING A PROJECT. PART II OF THE VOLUME CONSIDERS THE STRUCTURE OF SCIENCE…

  14. How To Host a Library Technology Fair.

    Science.gov (United States)

    Gaudin, Charles

    2000-01-01

    Describes how the Northwestern State University library organized a successful technology fair that focused on the library and campus technology. Discusses reasons for organizing the fair, including the introduction of new workstations; academic department participation; vendor participation; marketing strategies and communication; and student…

  15. Science Fair Projects. LC Science Tracer Bullet.

    Science.gov (United States)

    Carter, Constance, Comp.

    This bibliography assists junior and senior high school students and teachers in planning, preparing, executing, and evaluating science fair projects. A few books with experiments suitable for elementary grade students are listed. This publication is not intended to be a comprehensive bibliography but is designed to put the reader "on target."…

  16. The Complete Handbook of Science Fair Projects, Revised Edition.

    Science.gov (United States)

    Bochinski, Julianne Blair

    Science fairs have become an important key to gathering valuable science experience while pursuing independent projects. This book serves as a guide to every aspect of science fairs and science fair projects. It provides information on finding suitable topics, researching them properly, developing experiments, and giving meaning to data results.…

  17. The FAIR-INNOVATION dissemination project.

    Science.gov (United States)

    Gormley, R

    2001-08-01

    The goal of the FAIR-INNOVATION dissemination project (FLAIR-FLOW 3) (1997-2000) was to disseminate R&D results from the EU FAIR programme to small and medium-sized food enterprises (SMEs), health professionals (HPs) and consumer groups (CGs) in 19 European countries. The dissemination routes were: (i) one-page technical documents on research results; (ii) their reproduction on the internet; (iii) their reproduction in journals Europe-wide; (iv) workshops on results from EU-supported food research programmes; and (v) lectures and poster presentations by FLAIR-FLOW network personnel. Of the 135 one-pagers produced, 62% were targeted at SMEs, 18% at HPs and 5% at CGs. The remaining 15% were on food safety and were common to the three target groups. There were 1047 publications arising from one-pages in trade journals, and over 8000 requests (paper route) were received for follow-up information. These were in addition to 240 k downloads from the FLAIR-FLOW 3 web site (www.flair-flow.com). Initiatives for HPs included specially collated versions of the one-pagers for major conferences, 20 focused workshops, and interaction with the European Federation of Associations of Dieticians. Currently, dissemination is continuing through FLAIR-FLOW 4 (2001-2003) in 24 countries. FLAIR-FLOW 4 is co-ordinated by M. Jean François Quillien from INRA-CRIAA (FR) at criaa@rennes.inra.fr.

  18. The Need to Explore: Nonexperimental Science Fair Projects.

    Science.gov (United States)

    McNay, Margaret

    1985-01-01

    For the sake of grade school entrants in particular, nonexperimental science fair projects should be encouraged and accepted for science fairs. Support for this approach is given along with several suggestions for projects. Guidelines for judging nonexperimental projects are also included. (DH)

  19. Science Fair Projects: Teaching Science or Something Else?

    Science.gov (United States)

    Cornell, Elizabeth A.

    1981-01-01

    Frequently, science fair projects have little relevance to the goals of science. Criteria for judging projects are not evident to students, parents, judges, and other participants. Listed are seven steps to a better fair project which emphasize methodology and presentation. Also included are hints for involving parents. (DC)

  20. Fair

    CERN Multimedia

    2005-01-01

    The 'Presses Polytechniques Universitaires Romandes' is organising a book exhibition. The major topics covered will be science and technology. The fair will take place in the foyer of the main building (building 60), and will be open from 10am - 4pm on 5th July 2005.

  1. Science Fair Scene: How to Conduct a Science-Fair Project.

    Science.gov (United States)

    McQueen, David R.

    1991-01-01

    Advice on how to transform a practical idea into a first-class science fair project is provided. How to do scientific research, what to include in a science fair report, how to pick a topic, when to begin, writing the report, and making the display are topics of discussion. (KR)

  2. Non-Traditional Characteristics of a Successful Science Fair Project

    Science.gov (United States)

    Sumrall, William; Schillinger, Don

    2004-01-01

    Science fairs offer students the opportunity to develop skills in inquiry, writing research proposals, working with peers, verifying results, and sharing experimental findings. However, the science fair itself does not necessarily translate into a student's attainment of such skills. Project quality and a student's successful achievement of good…

  3. The HADES-at-FAIR project

    Energy Technology Data Exchange (ETDEWEB)

    Lapidus, K., E-mail: kirill.lapidus@ph.tum.de [Excellence Cluster ' Origin and Structure of the Universe' (Germany); Agakishiev, G. [Joint Institute of Nuclear Research (Russian Federation); Balanda, A. [Jagiellonian University, Smoluchowski Institute of Physics (Poland); Bassini, R. [Sezione di Milano, Istituto Nazionale di Fisica Nucleare (Italy); Behnke, C. [J.W.Goethe-Universitaet, Institut fuer Kernphysik (Germany); Belyaev, A. [Joint Institute of Nuclear Research (Russian Federation); Blanco, A. [LIP-Laboratorio de Instrumentacao e Fisica Experimental de Particulas (Portugal); Boehmer, M. [Technische Universitaet Muenchen, Physik Department E12 (Germany); Cabanelas, P. [Universidad de Santiago de Compostela, Departamento de Fisica de Particulas (Spain); Carolino, N. [LIP-Laboratorio de Instrumentacao e Fisica Experimental de Particulas (Portugal); Chen, J. C. [Excellence Cluster ' Origin and Structure of the Universe' (Germany); Chernenko, S. [Joint Institute of Nuclear Research (Russian Federation); Diaz, J. [Universidad de Valencia-CSIC, Instituto de Fisica Corpuscular (Spain); Dybczak, A. [Jagiellonian University, Smoluchowski Institute of Physics (Poland); Collaboration: HADES Collaboration; and others

    2012-05-15

    After the completion of the experimental program at SIS18 the HADES setup will migrate to FAIR, where it will deliver high-quality data for heavy-ion collisions in an unexplored energy range of up to 8 A GeV. In this contribution, we briefly present the physics case, relevant detector characteristics and discuss the recently completed upgrade of HADES.

  4. The HADES-at-FAIR project

    Science.gov (United States)

    Lapidus, K.; Agakishiev, G.; Balanda, A.; Bassini, R.; Behnke, C.; Belyaev, A.; Blanco, A.; Böhmer, M.; Cabanelas, P.; Carolino, N.; Chen, J. C.; Chernenko, S.; Díaz, J.; Dybczak, A.; Epple, E.; Fabbietti, L.; Fateev, O.; Finocchiaro, P.; Fonte, P.; Friese, J.; Fröhlich, I.; Galatyuk, T.; Garzón, J. A.; Gernhäuser, R.; Gil, A.; Göbel, K.; Golubeva, M.; González-Díaz, D.; Guber, F.; Gumberidze, M.; Harabasz, S.; Heidel, K.; Heinz, T.; Hennino, T.; Holzmann, R.; Huck, P.; Hutsch, J.; Ierusalimov, A.; Iori, I.; Ivashkin, A.; Jurkovic, M.; Kämpfer, B.; Kajetanowicz, M.; Karavicheva, T.; Koenig, I.; Koenig, W.; Kolb, B. W.; Korcyl, G.; Kornakov, G.; Kotte, R.; Kozuch, A.; Krebs, E.; Krücken, R.; Kuc, H.; Kühn, W.; Kugler, A.; Kurepin, A.; Kurilkin, A.; Kurilkin, P.; Ladygin, V.; Lalik, R.; Lange, J. S.; Liu, M.; Liu, T.; Lopes, L.; Lorenz, M.; Lykasov, G.; Maier, L.; Malakhov, A.; Mangiarotti, A.; Markert, J.; Metag, V.; Michalska, B.; Michel, J.; Müntz, C.; Münzer, R.; Naumann, L.; Palka, M.; Parpottas, Y.; Pechenov, V.; Pechenova, O.; Pereira, A.; Pietraszko, J.; Przygoda, W.; Ramstein, B.; Rehnisch, C.; Reshetin, A.; Rosier, P.; Rustamov, A.; Sadovsky, A.; Salabura, P.; Scheib, T.; Schmah, A.; Schuldes, H.; Schwab, E.; Siebenson, J.; Smolyankin, V.; Sobiella, M.; Sobolev, Yu. G.; Spataro, S.; Spruck, B.; Ströbele, H.; Stroth, J.; Sturm, C.; Tarantola, A.; Teilab, K.; Tiflov, V.; Tlusty, P.; Traxler, M.; Trebacz, R.; Troyan, A.; Tsertos, H.; Usenko, E.; Vasiliev, T.; Visotski, S.; Wagner, V.; Weber, M.; Wendisch, C.; Wüstenfeld, J.; Yurevich, S.; Zanevsky, Y.

    2012-05-01

    After the completion of the experimental program at SIS18 the HADES setup will migrate to FAIR, where it will deliver high-quality data for heavy-ion collisions in an unexplored energy range of up to 8 A GeV. In this contribution, we briefly present the physics case, relevant detector characteristics and discuss the recently completed upgrade of HADES.

  5. Science Fair Projects. LC Science Tracer Bullet.

    Science.gov (United States)

    Howland, Joyce, Comp.

    The sources listed in this document are selected to provide guidance to students, parents, and teachers throughout the process of planning, developing, implementing, and competing in science fair activities. While sources range in suitability from elementary to high school levels, the emphasis is on materials for grades 9-12. This guide updates LC…

  6. Plasma Fairings for Quieting Aircraft Landing Gear Noise Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase II SBIR project deals with the design, development, and testing of a "Plasma Fairing" to reduce noise on the Gulfstream G550 landing gear. The plasma...

  7. Expanding educational access and opportunities: The globalization and foreign direct investment of multinational corporations and their influence on STEM, project-based learning and the national science and technology fair in schools in Costa Rica

    Science.gov (United States)

    Valdez, Joaquin G.

    The purpose of this qualitative study was to examine the influence of globalization and the foreign direct investment (FDI) of multinational corporations (MNCs) on the curriculum in schools in Costa Rica. The study focused primarily on Science, Technology, Engineering and Mathematics (STEM), Project-Based Learning (PBL), 21st century skills, and the national science and technology fair. The high influx of MNCs such as Intel has changed the global and educational culture of the country increasing the number of knowledge-based workers in Costa Rica. As a result, policy changes have been instituted in education to mirror the demands of sustaining the country's global economy. This study was supported by the creation of three research questions that would attempt to answer 1) the extent that teachers implementing STEM curriculum trace their practices back to policy, globalization, and multinational corporations as well as the extent to which the economic growth of Costa Rica and STEM education are related, 2) how mandating the national science and technology fair has influenced 21st century skills through project-based learning and the use of technology by teachers and its impact on curriculum and instruction, and 3) how has the national science and technology fair policy changed the value of STEM education for students, teachers, and educational leaders. To further understand the outcome of this study, four theoretical frameworks were applied that included, Spring's theory of world educational culture, Friedman's world flatteners, Wagner's 21st century skills and partnerships for 21st century skills, and Slough and Milam's STEM project-based learning theoretical framework. Each framework was applied to support the changes to the educational system; survival skills necessary to compete in the global job market; application of 21st century skills in the classroom and in the science projects students created. A research team comprised of 14 doctoral students, led by Dr

  8. FLUKA shielding calculations for the FAIR project; FLUKA-Abschirmrechnungen fuer das FAIR-Projekt

    Energy Technology Data Exchange (ETDEWEB)

    Fehrenbacher, Georg [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Kozlova, Ekaterina; Radon, Torsten [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Abt. Beschleuniger-Strahlenschutz, Darmstadt (Germany); Sokolov, Alexey [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Abt. Strahlenschutz und Sicherheit, Darmstadt (Germany)

    2015-07-01

    FAIR is an international accelerator project being in construction at GSI Helmholtz center for heavy ion research in Darmstadt. The Monte Carlo program FLUKA is used to study radiation protection problems. The contribution deals with general application possibilities of FLUKA and for FAIR with respect the radiation protection planning. The necessity to simulate the radiation transport through shielding of several meters thickness and to determine the equivalent doses outside the shielding with sufficient accuracy is demonstrated using two examples under consideration of the variance reduction. Results of simulation calculations for activation estimation in accelerator facilities are presented.

  9. Examining Perceptions of the Science Fair Project: Content or Process?

    Science.gov (United States)

    Watson, Jinx Stapleton

    2003-01-01

    Discusses student research, information literacy and research skills, and the role of inquiry in the research process. Presents a case study of a middle school science fair project that examined what students should accomplish in their research and what the role of stakeholders is, including teachers, parents, and school library media specialists.…

  10. Examining Perceptions of the Science Fair Project: Content or Process?

    Science.gov (United States)

    Watson, Jinx Stapleton

    2003-01-01

    Discusses student research, information literacy and research skills, and the role of inquiry in the research process. Presents a case study of a middle school science fair project that examined what students should accomplish in their research and what the role of stakeholders is, including teachers, parents, and school library media specialists.…

  11. Technology is Changing What's "Fair Use" in Teaching

    Directory of Open Access Journals (Sweden)

    Linda Howe-Steiger

    2002-01-01

    Full Text Available The Doctrine of Fair Use was established by the courts to exempt certain activities such as teaching and research from the legal requirements of the copyright law. Before the 1976 Revision of the Copyright Act, only two cases were brought against teachers for copyright infringements. In both cases the teachers lost because their extensive copying was found to impact the copyright owner's market for legally published copies. Although the 1976 Act explicitly recognizes the existence of potentially Fair Uses, the act makes application of the principle highly situational. Classroom Guidelines attached to the Act make application even more murky and constrained. After 1976 photocopy technology and the advent of the coursepack began a trend towards circumscribing situations in which Fair Use may be applied. Potential impact on a new, lucrative market for sale of rights to copy portions of books and journals appears to dominate contemporary case law. Desktop publishing and Internet and web-based teaching, the authors believe, will further erode traditional applications of Fair Use for educational purposes. They argue that instructors and researchers should assume that there is no Fair Use on the Internet. Guidelines are provided for faculty and others considering dissemination of potentially copyrighted materials to students via digital technologies.

  12. faire ?

    African Journals Online (AJOL)

    africaine', elle s'intéressait à une histoire qui devait d'abord leur restituer un ..... définition de faire de l'histoire » des courants historiographiques actuels”. ..... nent — la production africaine du monde au plan géographique et humain n et.

  13. Fair Oaks Dairy Farms Cellulosic Ethanol Technology Review Summary

    Energy Technology Data Exchange (ETDEWEB)

    Andrew Wold; Robert Divers

    2011-06-23

    At Fair Oaks Dairy, dried manure solids (''DMS'') are currently used as a low value compost. United Power was engaged to evaluate the feasibility of processing these DMS into ethanol utilizing commercially available cellulosic biofuels conversion platforms. The Fair Oaks Dairy group is transitioning their traditional ''manure to methane'' mesophilic anaerobic digester platform to an integrated bio-refinery centered upon thermophilic digestion. Presently, the Digested Manure Solids (DMS) are used as a low value soil amendment (compost). United Power evaluated the feasibility of processing DMS into higher value ethanol utilizing commercially available cellulosic biofuels conversion platforms. DMS was analyzed and over 100 potential technology providers were reviewed and evaluated. DMS contains enough carbon to be suitable as a biomass feedstock for conversion into ethanol by gasification technology, or as part of a conversion process that would include combined heat and power. In the first process, 100% of the feedstock is converted into ethanol. In the second process, the feedstock is combusted to provide heat to generate electrical power supporting other processes. Of the 100 technology vendors evaluated, a short list of nine technology providers was developed. From this, two vendors were selected as finalists (one was an enzymatic platform and one was a gasification platform). Their selection was based upon the technical feasibility of their systems, engineering expertise, experience in commercial or pilot scale operations, the ability or willingness to integrate the system into the Fair Oaks Biorefinery, the know-how or experience in producing bio-ethanol, and a clear path to commercial development.

  14. The role of the computer in science fair projects: Current status and potential

    Energy Technology Data Exchange (ETDEWEB)

    Trainor, M.S.

    1991-01-01

    The need for more students to enter the field of science is acute in the nation, and science fair projects provide a motivational mechanism to entice students into pursuing scientific careers. Computers play a major role in science today. Because computers are a major source of entertainment for our children, one would expect them to play a significant role in many science fair projects. This study investigated current and potential uses of computers in science fair projects and incorporated an informal case study of scientists, teachers, and students involved in science fair projects from a highly scientific community. Interviews, a survey, and observations were conducted. Results indicated that most projects either do not use or inadequately use computers and that a significant potential for more effective use of computers for science fair projects exists.

  15. "Saturday Night Live" Goes to High School: Conducting and Advising a Political Science Fair Project

    Science.gov (United States)

    Allen, Meg; Brewer, Paul R.

    2010-01-01

    This article uses a case study to illustrate how science fair projects--which traditionally focus on "hard science" topics--can contribute to political science education. One of the authors, a high school student, conducted an experimental study of politics for her science fair project. The other author, a faculty member, was asked to advise the…

  16. "Saturday Night Live" Goes to High School: Conducting and Advising a Political Science Fair Project

    Science.gov (United States)

    Allen, Meg; Brewer, Paul R.

    2010-01-01

    This article uses a case study to illustrate how science fair projects--which traditionally focus on "hard science" topics--can contribute to political science education. One of the authors, a high school student, conducted an experimental study of politics for her science fair project. The other author, a faculty member, was asked to advise the…

  17. 76 FR 12507 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2011-03-07

    ... Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project... monitor the fair, equitable, and consistent implementation of the provisions of the demonstration project... March 7, 2011 Part III Department of Defense Science and Technology Reinvention Laboratory...

  18. Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  19. Radiation protection planning for the international FAIR project; Strahlenschutzplanung fuer das internationale FAIR-Projekt

    Energy Technology Data Exchange (ETDEWEB)

    Fehrenbacher, G. [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); FAIR - Facility for Antiproton and Ion Research in Europe GmbH, Darmstadt (Germany); Belousov, A.; Conrad, I. [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); and others

    2015-07-01

    FAIR (=Facility for AntiProton and Ion Research) is an international accelerator facility which will be built near the GSI site in Darmstadt, where protons and heavy ion beams can be accelerated in a synchrotron to energies up to 30 GeV/nucleon with intensities partially up to 1E13/sec. The accelerated particles will be used for experiments in atomic, nuclear and plasma physics as well as for radiation biology and medicine and materials research. The radiation protection planning focuses on the estimation of radiation fields produced by heavy ions and its shielding. As examples, the radiation protection planning for the heavy ion synchrotron SIS100 as well as for two experiment caves are presented. Moreover, further important topics in this radiation protection planning are the estimation of the distribution and production of radionuclides in media and the handling before disposal.

  20. Planning a Science Fair

    Science.gov (United States)

    Ebert, Jim

    1976-01-01

    Presented are views, on planning science fairs and science fair projects, of a fair coordinator, a science teacher, and students. Also included are 25 questions which might result in science fair projects. (SL)

  1. Planning a Gender Fair as a Semester-Long Final Project

    Science.gov (United States)

    Enck, Suzanne Marie

    2015-01-01

    This semester-long activity for a "Gender Fair" project helps undergraduate students gain an appreciation of gender as a social, historical, and cultural construction that is constituted intersectionally (with race-class-sexuality, at minimum) and fundamentally through communication practices. Specifically, upon completing this project,…

  2. The use of animals in national high school student science fair projects in the United States.

    Science.gov (United States)

    Miller-Spiegel, Crystal

    2004-06-01

    Science fair projects can provide a sound opportunity to teach students the value of scientific methodology without relying on the routine and unnecessary use of animals. Unfortunately, students are often encouraged to use animals in an expendable manner that both duplicates previous experiments and neglects the opportunity to "think outside the box" in order to generate new hypotheses/theories about human health, physiological processes or basic biological concepts. Although at least one national science fair sponsor has changed its policy regarding students' utilisation of vertebrate animals, others continue to encourage the more traditional in vivo experimental projects. This paper will review the guidelines of two major national science fairs in the USA; types of projects conducted that involve animals; numbers of animals involved; interview responses by some student finalists who used vertebrates in their projects; successful initiatives by animal advocates in the USA to eliminate the use of animals in science fairs; and potential areas of outreach to science educators, science fair sponsors, high schools and students.

  3. Information technology project management

    National Research Council Canada - National Science Library

    Schwalbe, Kathy

    2014-01-01

    ... (IT) projects that extend well beyond standard project management requirements. No book offers more up-to-the minute insights and software tools for IT project management success, including updates that reflect the latest PMBOKʼ...

  4. Information technology project management

    National Research Council Canada - National Science Library

    Schwalbe, Kathy

    2014-01-01

    ... (IT) projects that extend well beyond standard project management requirements. No book offers more up-to-the minute insights and software tools for IT project management success, including updates that reflect the latest PMBOK...

  5. Transformational Tools and Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Transformational Tools and Technologies (TTT) Project advances state-of-the-art computational and experimental tools and technologies that are vital to aviation...

  6. Fundamentals of technology project management

    CERN Document Server

    Garton, Colleen

    2012-01-01

    Designed to provide software engineers, students, and IT professionals with an understanding of the fundamentals of project management in the technology/IT field, this book serves as a practical introduction to the subject. Updated with information on how Fundamentals of Project Management integrates with and complements Project Management Institute''s Project Management Body of Knowledge, this collection explains fundamental methodologies and techniques while also discussing new technology, tools, and virtual work environments. Examples and case studies are based on technology projects, and t

  7. How Can I Help My Child with a Science Fair Project?

    Science.gov (United States)

    DeBruin, Jerome E.

    1980-01-01

    Sixteen different suggestions are given to parents for helping their children with science fair projects. Among the 16 suggestions included are contacting people who have expertise in science, helping the child obtain pertinent information, keeping a daily log of research activities. (DS)

  8. Science Fair Projects Bring It All Together: Collaboration, Information Literacy, and Public Relations.

    Science.gov (United States)

    Young, Terrence E., Jr.

    2000-01-01

    Discusses the role of school library media specialists in helping students with science fair projects. Topics include selecting a topic; reviewing basic library resources, including print and electronic; remote access to databases; locating information on the Web; word processing and presentation software; and relevant Web sites. (LRW)

  9. Technology Education Professional Enhancement Project

    Science.gov (United States)

    Hughes, Thomas A., Jr.

    1996-01-01

    The two goals of this project are: the use of integrative field of aerospace technology to enhance the content and instruction delivered by math, science, and technology teachers through the development of a new publication entitled NASA Technology Today, and to develop a rationale and structure for the study of technology, which establishes the foundation for developing technology education standards and programs of the future.

  10. Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

    Science.gov (United States)

    1999-01-01

    Center Director Roy Bridges stops to talk to one of the vendors at the Disability Awareness and Action Working Group (DAAWG) Technology Fair being held Oct. 20-21 at Kennedy Space Center. With him at the far left is Sterling Walker, director of Engineering Development at KSC and chairman of DAAWG, and Nancie Strott, a multi-media specialist with Dynacs and chairperson of the Fair; at the right is Carol Cavanaugh, with KSC Public Services. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

  11. China Fairs & Expos

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Commodity and Trade Fair Urnmqi Foreign Economic Relations and Trade Fair Date:September 1-September 5,2008 Venue:Xinjiang International Exhibition Center Sector:Exhibition of new products,new technology and new project,to negotiate on import & export trade and domestic commodity trade,etc Web:www.urmqifair.com Add:107,Xinhua South Road,Urumchi,China, 830049 Tel:86-991-2850497/2879890 Fax:86-991-2850497/2879890 E-mail:office@urumqifair.com

  12. [Earth Science Technology Office's Computational Technologies Project

    Science.gov (United States)

    Fischer, James (Technical Monitor); Merkey, Phillip

    2005-01-01

    This grant supported the effort to characterize the problem domain of the Earth Science Technology Office's Computational Technologies Project, to engage the Beowulf Cluster Computing Community as well as the High Performance Computing Research Community so that we can predict the applicability of said technologies to the scientific community represented by the CT project and formulate long term strategies to provide the computational resources necessary to attain the anticipated scientific objectives of the CT project. Specifically, the goal of the evaluation effort is to use the information gathered over the course of the Round-3 investigations to quantify the trends in scientific expectations, the algorithmic requirements and capabilities of high-performance computers to satisfy this anticipated need.

  13. Additive Manufacturing Technology Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The 3D Printing In Zero-G (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling...

  14. SHANGHAI INTERNATIONAL INDUSTRIAL FAIR

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Third Shanghai International Industrial Fair was held in New International Fair Center in Pudong Area in late November. This industrial fair titled "Information and Industrialization" aimed at highlighting China's high technology and industrial achievements in the new century. The sponsors for this session of industrial fair include China State Economic and Trade Commission, Ministry of Foreign Economic and Trade Relations, Ministry of Information Industry, Ministry of Science and Technology, Ministry of Education, Chinese Academy of Sciences and Shanghai Government.CNPC and Sinopec participated in the exhibition displaying a number of the latest technologies such as PetroChina's model for state land resources and Sinopec's model for 300,000-ton ethylene project.

  15. Examining of the Predictors of Pre-Service Teachers' Perceptions of the Quality of the Science Fair Projects in Turkey

    Science.gov (United States)

    Tortop, Hasan Said

    2014-01-01

    This study aimed at examining the predictors of quality of science fair (SF) projects in the light of pre-service teachers' evaluation of SF rubric' domains. These projects were selected by judges in A city for the A Regional Exhibition of Science and Mathematics Project Study for Primary School Students: The SF projects were evaluated by thirty…

  16. Photonics: Technology project summary

    Science.gov (United States)

    Depaula, Ramon P.

    1991-01-01

    Photonics involves the use of light (photons) in conjunction with electronics for applications in communications, computing, control, and sensing. Components used in photonic systems include lasers, optical detectors, optical wave guide devices, fiber optics, and traditional electronic devices. The goal of this program is to develop hybrid optoelectronic devices and systems for sensing, information processing, communications, and control. It is hoped that these new devices will yield at least an order of magnitude improvement in performance over existing technology. The objective of the program is to conduct research and development in the following areas: (1) materials and devices; (2) networking and computing; (3) optical processing/advanced pattern recognition; and (4) sensing.

  17. Photonics: Technology project summary

    Science.gov (United States)

    Depaula, Ramon P.

    1991-01-01

    Photonics involves the use of light (photons) in conjunction with electronics for applications in communications, computing, control, and sensing. Components used in photonic systems include lasers, optical detectors, optical wave guide devices, fiber optics, and traditional electronic devices. The goal of this program is to develop hybrid optoelectronic devices and systems for sensing, information processing, communications, and control. It is hoped that these new devices will yield at least an order of magnitude improvement in performance over existing technology. The objective of the program is to conduct research and development in the following areas: (1) materials and devices; (2) networking and computing; (3) optical processing/advanced pattern recognition; and (4) sensing.

  18. Bilingual communication methods, text versus video, to increase parent involvement and science fair project student achievement

    Science.gov (United States)

    Clevenson, Rhonda Suzanne

    This research examined the responses of families to bilingual communication methods, text versus video, designed to facilitate school to home communication to increase parent involvement and seventh grade student achievement in the science fair project. Using an experimental design, 161 families were randomly selected to receive either a two part informational text or video series during the science fair unit taught at a culturally diverse urban middle school. The bilingual informational materials were created and produced by the staff at the research site. Measures were taken to make sure all families could access the informational materials and innovations such as a special travel envelope and reminding procedures aided data collection. Surveys measuring variables on a Likert scale with spaces for comments were collected from the parents and students. An interrater reliability study was completed to measure the agreement of the two teachers who used a grading checklist to score science fair project achievement. Quantitative methods including ANOVA and MLR were used to examine the data in terms of student achievement and the communication method (text or video), audience (students and parents), and the anticipated outcome (parent help). Nonparametric and qualitative data analyses were used to explore how families used and responded to the informational materials. Significant results were that the video communication method was positively associated with student achievement on the science fair project. Significant main effects were observed for the student characteristics, educational services (general and special education, and English as a Second Language), and previous achievement in science, and the parent characteristics, previous experience with science fair projects, primary viewing language (English or Spanish), and expectations for student achievement. Student achievement was not significantly related to the amount or usefulness of parent help. The amount

  19. Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

    Science.gov (United States)

    1999-01-01

    Center Director Roy Bridges stops to pet one of the dogs that serves with Canine Companions for Independence, a vendor displaying its capabilities at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Standing at the right is Carol Cavanaugh, with KSC Public Services; behind Bridges is Nancie Strott (left), a multi-media specialist with Dynacs and chairperson of the Fair, and Sterling Walker (right), director of Engineering Development and chairman of DAAWG. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the other vendors participating are Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

  20. An Alternative Science Fair.

    Science.gov (United States)

    Romjue, Mary Kalen; Clementson, John J.

    1992-01-01

    Proposes the organization of noncompetitive science fairs to create a more positive learning experience for children in the elementary grades. Describes methods of organizing and judging the fair, and provides a list of suggested resources for science fair projects. (MDH)

  1. Merging science, engineering, and data with FUN: Recreational Drones in STEaM Education Activities and Science Fair Projects

    Science.gov (United States)

    Olds, S. E.; Mooney, M. E.; Dahlman, L. E.

    2016-12-01

    Recreational drones, also known as unmanned aerial vehicles (UAVs), provide an ideal platform for engaging students in science, technology, engineering, and math (STEM) investigations for science fair projects, after-school clubs, and in-class activities. UAVs are very popular (estimate of >1 million received as gifts this past year), relatively inexpensive (Arduino board. This presentation will elaborate upon the year-long process of working with educators via webinars and a 1-day workshop at the 2016 ESIP summer meeting and beyond. It will also provide examples of student-led investigations, instructions for building the SABEL sensor package, insights gleaned from workshop feedback - and - the status of the new e-book compilation of student-focused activities using recreational drones to pursue STEM investigations!

  2. Challenges and opportunities for atomic physics at FAIR: The new GSI accelerator project

    Energy Technology Data Exchange (ETDEWEB)

    Hagmann, S. [Institut f. Kernphysik, University of Frankfurt (Germany) and GSI, Max Planckstr.1, Darmstadt (Germany)]. E-mail: s.hagmann@gsi.de; Beyer, H.F. [GSI, Max Planckstr.1, Darmstadt (Germany); Bosch, F. [GSI, Max Planckstr.1, Darmstadt (Germany); Braeuning-Demian, A. [GSI, Max Planckstr.1, Darmstadt (Germany); Kluge, H.-J. [GSI, Max Planckstr.1, Darmstadt (Germany); Kozhuharov, Ch. [GSI, Max Planckstr.1, Darmstadt (Germany); Kuehl, Th. [GSI, Max Planckstr.1, Darmstadt (Germany); Liesen, D. [GSI, Max Planckstr.1, Darmstadt (Germany); Stoehlker, Th. [GSI, Max Planckstr.1, Darmstadt (Germany); Ullrich, J. [Max Planck Inst. f. Kernphysik, Heidelberg (Germany); Moshammer, R. [Max Planck Inst. f. Kernphysik, Heidelberg (Germany); Mann, R. [GSI, Max Planckstr.1, Darmstadt (Germany); Mokler, P. [GSI, Max Planckstr.1, Darmstadt (Germany); Quint, W. [GSI, Max Planckstr.1, Darmstadt (Germany); Schuch, R. [Department of Physics, University of Stockholm (Sweden); Warczak, A. [Department of Physics, University of Cracow (Poland)

    2005-12-15

    We present a short overview of the current status of the new accelerator project FAIR at GSI with the new double synchrotron rings and the multi-storage rings. The key features of the new facility, which provides intense relativistic beams of stable and unstable nuclei, are introduced and their relation to the anticipated experimental programs in nuclear structure physics and antiproton physics is shown. The main emphasis in this overview is given to the atomic physics program with unique opportunities which will be provided e.g. by bare U{sup 92+} ions with kinetic energies continuously variable between relativistic energies corresponding to {gamma} up to {approx_equal}35 down to kinetic energies of such ions in traps corresponding to fractions of a Kelvin.

  3. Taking CERN and ESA technology to the World’s largest industry fair

    CERN Multimedia

    2014-01-01

    Signed just two weeks ago, the new CERN-ESA agreement is already bearing fruit. This week, our two organisations went to the World’s leading industrial fair, the Hannover Messe, with a joint stand showcasing technologies derived from particle physics and space research.   The notion that space brought us Teflon is something of a cliché, and of dubious veracity, while the World Wide Web is the technology most closely, and in this case correctly, identified with CERN. But technology transfer from ESA and CERN goes well beyond clichés: much of the technology we take for granted today can be traced back to basic research in the highly demanding research fields our organizations deal in. This is a message that both CERN and ESA strive to communicate, and the Hannover Messe gave us that opportunity. But going to Hannover was about more than showcasing past success: it was first and foremost about laying the groundwork for future success. Much of the technology deve...

  4. Examining of the Predictors of Pre-service Teachers’ Perceptions of the Quality of the Science Fair Projects in Turkey

    OpenAIRE

    Hasan Said TORTOP

    2014-01-01

    This study aimed at examining the predictors of quality of science fair (SF) projects in the light of pre-service teachers’ evaluation of SF rubric’ domains. These projects were selected by judges in A city for the A Regional Exhibition of Science and Mathematics Project Study for Primary School Students: The SF projects were evaluated by thirty junior pre-service teachers who took the Projects Based Learning Applications course at A University A Faculty of Education in the Fall Term of the a...

  5. PENGEMBANGAN ASESMEN ALTERNATIF PRAKTIKUM KIMIA DASAR II MELALUI CHEMISTRY FAIR PROJECT (CFP BERBASIS KONSERVASI DENGAN MEMANFAATKAN DAILY CHEMICAL

    Directory of Open Access Journals (Sweden)

    Indah Urwatin Wusqo

    2016-12-01

    Full Text Available Penelitian ini bertujuan untuk (1 Mengembangkan asesmen alternatif pada praktikum kimia dasar II melalui chemistry fair project berbasis konservasi dengan memanfaatkan daily chemical(2 Mengetahui tingkat kevalidan, kepraktisan dan keefektifannya. Penelitian ini merupakan penelitian pengembangan (Development Research Model pengembangan yang diterapkan Dick dan Carey (1985. Subjek uji coba terbatas maupun subjek uji coba lapangan adalah dosen dan mahasiswa Prodi Pendidikan IPA UNNES. Sampel ditentukan secara purposive, yaitu dosen pengampu dan mahasiswa yang menempuh mata kuliah Praktikum Kimia Dasar II. Data yang diperoleh dari uji coba ini adalah: (1 masukan dari pakar, untuk menentukan validitas isi dan konstruk dari fitur asesmen; (2 masukan dari sampel uji coba terbatas, untuk menentukan kepraktisan petunjuk chemistry fair project (CFP berbasis konservasi dengan memanfaatkan daily chemical ; Instrumen pengumpul data berupa angket keterbacaan petunjuk pembuatan chemistry fair project (CFP berbasis konservasi dengan memanfaatkan daily chemical, pedoman penskoran. (3 data hasil belajar siswa untuk mengetahui efektivitas asesmen. Masukan dari pakar angket mahasiswa, dan nilai chemistry fair project (CFP sampel ujicoba terbatas dianalisis secara kualitatif, dan kuantitatif. Asesmen alternative Praktikum Kimia Dasar II yang dikembangkan dikatakan berhasil baik apabila asesmen yang dikembangkan valid, praktis, dan efektif.

  6. It's TIME for Technology: The Technology in Mathematics Education Project

    Science.gov (United States)

    Hardy, Michael

    2008-01-01

    This article describes the impact that the Technology in Mathematics Education (TIME) Project had on participating middle level and secondary mathematics teachers' preparedness to teach through technology. Results indicate that the TIME Project positively impacted participants' perceptions of their knowledge of technological resources and methods…

  7. Judging Fairs Fairly.

    Science.gov (United States)

    McBride, John W.; Silverman, Fredrick L.

    1988-01-01

    Discusses some of the problems associated with winners and losers at science fairs. Presents two alternatives to the traditional prize system: "The Scouting Concept" and "The County Fair Concept." Stresses the values and learnings that are associated with successful fairs. (CW)

  8. Patients' perspectives in health technology assessment: a route to robust evidence and fair deliberation.

    Science.gov (United States)

    Facey, Karen; Boivin, Antoine; Gracia, Javier; Hansen, Helle Ploug; Lo Scalzo, Alessandra; Mossman, Jean; Single, Ann

    2010-07-01

    There is increasing emphasis on providing patient-focused health care and ensuring patient involvement in the design of health services. As health technology assessment (HTA) is meant to be a multidisciplinary, wide-ranging policy analysis that informs decision making, it would be expected that patients' views should be incorporated into the assessment. However, HTA is still driven by collection of quantitative evidence to determine the clinical and cost effectiveness of a health technology. Patients' perspectives about their illness and the technology are rarely included, perhaps because they are seen as anecdotal, biased views. There are two distinct but complementary ways in which HTAs can be strengthened by: (i) gathering robust evidence about the patients' perspectives, and (ii) ensuring effective engagement of patients in the HTA process from scoping, through evidence gathering, assessment of value, development of recommendations and dissemination of findings. Robust evidence eliciting patients' perspectives can be obtained through social science research that is well conducted, critically appraised and carefully reported, either through meta-synthesis of existing studies or new primary research. Engagement with patients can occur at several levels and we propose that HTA should seek to support effective patient participation to create a fair deliberative process. This should allow two-way flow of information, so that the views of patients are obtained in a supportive way and fed into decision-making processes in a transparent manner.

  9. Collaborative Simulation and Testing of the Superconducting Dipole Prototype Magnet for the FAIR Project

    Science.gov (United States)

    Zhu, Yinfeng; Zhu, Zhe; Xu, Houchang; Wu, Weiyue

    2012-08-01

    The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research (FAIR) is an international cooperation project. The collaborative simulation and testing of the developed prototype magnet is presented in this paper. To evaluate the mechanical strength of the coil case during quench, a 3-dimensional (3D) electromagnetic (EM) model was developed based on the solid97 magnetic vector element in the ANSYS commercial software, which includes the air region, coil and yoke. EM analysis was carried out with a peak operating current at 278 A. Then, the solid97 element was transferred into the solid185 element, the coupled analysis was switched from electromagnetic to structural, and the finite element model for the coil case and glass-fiber reinforced composite (G10) spacers was established by the ANSYS Parametric Design Language based on the 3D model from the CATIA V5 software. However, to simulate the friction characteristics inside the coil case, the conta173 surface-to-surface contact element was established. The results for the coil case and G10 spacers show that they are safe and have sufficient strength, on the basis of testing in discharge and quench scenarios.

  10. A preparation Penning trap for the TRAPSENSOR project with prospects for MATS at FAIR

    Science.gov (United States)

    Cornejo, J. M.; Rodríguez, D.

    2016-06-01

    Most of the Penning trap spectrometers for precision measurements at radioactive ion beam facilities make use of another Penning trap, located upstream in the experimental set up, to perform isobaric separation and deliver cooled and pure ion samples to be measured. The preparation trap for the project TRAPSENSOR at the University of Granada has been built to prepare ions, produced off-line with a laser-desorption ion source, using firstly the buffer-gas cooling technique. The system has been built following the geometrical specifications given in the Technical Design Report for the MATS Penning-trap system to be built at the future Facility for Antiprotons and Ion Research (FAIR) in Darmstadt. So far, cooling resonances have been obtained for stable nuclides, with mass-to-charge ratios ranging from 40 to about 200, with a performance similar to those systems already in operation at radioactive ion beam facilities. In this contribution, the preparation trap, built and commissioned at the University of Granada, will be briefly described. First results on buffer-gas cooling will be presented.

  11. A Fair Proposition?

    Science.gov (United States)

    Grobman, Arnold

    1993-01-01

    Describes problems with school science fairs including poor judging and a lack of understanding by the students of their own projects. Suggests improvements to the system. One suggestion is for science fair projects to be displayed only in classrooms and not district or regional fairs. (PR)

  12. The Language Technologies for Lifelong Learning Project

    NARCIS (Netherlands)

    Berlanga, Adriana

    2009-01-01

    Berlanga, A. J. (2009). The Language Technologies for Lifelong Learning Project. Poster presented at the 9th IEEE International Conference on Advanced Learning Technologies (ICALT 2009). July, 15-17, 2009, Riga, Latvia.

  13. Advanced Situation Awareness Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. This powerful technology will also find...

  14. Examining of the Predictors of Pre-service Teachers’ Perceptions of the Quality of the Science Fair Projects in Turkey

    Directory of Open Access Journals (Sweden)

    Hasan Said TORTOP

    2014-06-01

    Full Text Available This study aimed at examining the predictors of quality of science fair (SF projects in the light of pre-service teachers’ evaluation of SF rubric’ domains. These projects were selected by judges in A city for the A Regional Exhibition of Science and Mathematics Project Study for Primary School Students: The SF projects were evaluated by thirty junior pre-service teachers who took the Projects Based Learning Applications course at A University A Faculty of Education in the Fall Term of the academic year of 2011-2012. The results of study revealed that the lowest mean scores of the domain of SF rubric was the method domain (X ̅=1.35, and the highest mean scores of the domain of SF rubric was the utility domain (X ̅=1.64 according to the results of the descriptive statistics. Surprisingly, the methods domain was one of the weakest predictors of overall scores of the SF rubric. It is important that project competitions and project based learning applications should do to help students to gain the scientific research skills. The necessary steps should be taken to help teachers and pre-service teachers to look at the science fair and preparing SF projects from this perspective.

  15. Gerber Technology Showcases Latest Automation Solutions for the Apparel Industry at China's Dongguan Fair 2012

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    During the 13th China (D.ongguan) International Textile and Clothing Industry Fair (DTC 2012) being held March 28-31, Gerber Technology showcased its software and hardware systems under the theme Take Comfort in Qur Experience.

  16. Management of Innovative Projects through Agile Technology

    Directory of Open Access Journals (Sweden)

    Radu Bucea-Manea-Tonis

    2014-09-01

    Full Text Available Because of the globalization and the evolution of internet and technologies, nowadays the innovation is associated with open collaboration conducted by a legal framework. The paper analyses the methods that allow a better management for innovative projects and focuses on agile projects within a technological network.

  17. Smart Gun Technology project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1996-05-01

    The goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user form firing a law officer`s firearm by implementing user-recognizing-and-authorizing (or {open_quotes}smart{close_quotes}) surety technologies. This project was funded by the National Institute of Justice. This report lists the findings and results of the project`s three primary objectives. First, to find and document the requirements for a smart firearm technology that law enforcement officers will value. Second, to investigate, evaluate, and prioritize technologies that meet the requirements for a law enforcement officer`s smart firearm. Third, to demonstrate and document the most promising technology`s usefulness in models of a smart firearm.

  18. Methane LIDAR Laser Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fibertek proposes to develop laser technology intended to meet NASA's need for innovative lidar technologies for atmospheric measurements of methane. NASA and the...

  19. Advanced Situation Awareness Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. ASAT will create an Advanced Situation...

  20. Improved hyperspectral imaging technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Improved hyperspectral imaging technologies could enable lower-cost analysis for planetary science including atmospheric studies, mineralogical investigations, and...

  1. NUSTAR and the status of the R3B project at FAIR

    Indian Academy of Sciences (India)

    O Tengblad; R3B

    2010-08-01

    Over the last 15 years, reaction experiments on fixed targets using secondary beams of high energy have developed a potential as exploratory tool to study the properties of nuclei far from stability. NUSTAR (nuclear structure, astrophysics and reactions) is a collaboration of the international nuclear structure and astrophysics community with the aim to further explore this method at the FAIR Facility. Within the FAIR complex, NUSTAR defines a facility where the heart is the super-fragment separator (Super-FRS), which serves three experimental branches: The RING, the LOW- and the HIGH-ENERGY branches.

  2. Personal projection with Ujoy technology

    Science.gov (United States)

    Moench, Holger; Mackens, Uwe; Pekarski, Pavel; Ritz, Arnd; S'heeren, Griet; Verbeek, Will

    2007-02-01

    Personal projection is a new way to use projectors for gaming, entertainment or photo projection. The requirements for this new category have been defined based on market research with focus groups. A screen brightness of 200-300lm out of compact and affordable devices is a must. In order to reach this performance a very bright light source is at least as important as for professional projectors. The new 50W Ujoy lamp system with 1mm arc enables efficient projection systems. Lower cooling requirements, the potential for battery operation and the low voltage input makes it the ideal source for this new category of projectors.

  3. Causal Models for Safety Assurance Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fulfillment of NASA's System-Wide Safety and Assurance Technology (SSAT) project at NASA requires leveraging vast amounts of data into actionable knowledge. Models...

  4. Computer Programming Projects in Technology Courses.

    Science.gov (United States)

    Thomas, Charles R.

    1985-01-01

    Discusses programming projects in applied technology courses, examining documentation, formal reports, and implementation. Includes recommendations based on experience with a sophomore machine elements course which provided computers for problem solving exercises. (DH)

  5. Science Fair Projects. LC Science Tracer Bullet. TB 07-6

    Science.gov (United States)

    Howland, Joyce, Comp.

    2007-01-01

    Selected sources in this bibliography provide guidance to students, parents, and teachers throughout the process of planning, developing, implementing and competing in science fair activities. Sources range in suitability from elementary to high school levels. This guide updates "Library of Congress Science Tracer Bullet" 01-4. More specialized…

  6. Wireless Sensor Portal Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Mobitrum Corporation has demonstrated the feasibility in the Phase I of " A Wireless Sensor Portal Technology" and proposes a Phase II effort to develop a wireless...

  7. Computer Technology in Construction Project Management

    Institute of Scientific and Technical Information of China (English)

    Zhang Zhi

    2014-01-01

    Today, the network information has become a trend al of the industries have to face. For the construction project management, we must fuly master the use of computer information technology, mining its intrinsic value, so that it can promote the construction industry to meet the requirements of the times. This paper demonstrates the main application of computer technology in construction project management in a brief analysis.

  8. OVERVIEW OF A NATIONAL SCIENCE FAIR IN TURKEY FROM THE FOCUS ON ADMINISTRATORS’, TEACHERS’, STUDENTS’ VIEWS AND QUALITY OF SCIENCE PROJECTS

    Directory of Open Access Journals (Sweden)

    Hasan Said TORTOP

    2013-06-01

    Full Text Available In Turkey called ‘’This is My Work’’ science and mathematics project science fair for elementary school students has been investigated this qualitative study from perspectives of administrator, teacher and students about engaging motivations, difficulties, increasing of involving and productivity, mentorship role, contributing of science education, collaboration with corporation and institutes at project preparing process and quality of science projects. This study was conducted at 2009-2010 educational term, and its sample students engaging from A city at B Regional Fair and their administrators and teachers. Semi-structured interviews, observations, projects reports, attitudinal survey used as collecting data tools. Results form data analysis; engaging motivations administrators that school reputation, teachers stated that pressure of administrator and student willingness, students stated that viewing project. Although teacher are positive attitude towards science fair, they stated that ‘’If my district did not require participation, I would not involve my students in science fair competitions’’ mostly. Administrators, teachers and student mostly stated that mentorships or parents are more effective role at projects making. Findings which qualitative investigating of projects determined serious mistakes at using scientific method, data analysis and searching resource. It should be taken importance to the teachers who are key role at science fairs, if it wants to achieve the science fairs’ aims. It should not be ignored the dimension of ethics and moral education at science fair.

  9. Cost analysis methodology: Photovoltaic Manufacturing Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Whisnant, R.A. (Research Triangle Inst., Research Triangle Park, NC (United States))

    1992-09-01

    This report describes work done under Phase 1 of the Photovoltaic Manufacturing Technology (PVMaT) Project. PVMaT is a five-year project to support the translation of research and development in PV technology into the marketplace. PVMaT, conceived as a DOE/industry partnership, seeks to advanced PV manufacturing technologies, reduce PV module production costs, increase module performance, and expand US commercial production capacities. Under PVMaT, manufacturers will propose specific manufacturing process improvements that may contribute to the goals of the project, which is to lessen the cost, thus hastening entry into the larger scale, grid-connected applications. Phase 1 of the PVMaT project is to identify obstacles and problems associated with manufacturing processes. This report describes the cost analysis methodology required under Phase 1 that will allow subcontractors to be ranked and evaluated during Phase 2.

  10. Ceramic technology for advanced heat engines project

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems in Conservation and Renewable Energy. This project was developed to meet the ceramic technology requirements of the OTT's automotive technology programs. This project is managed by ORNL and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DoD, and industry. Research is discussed under the following topics; Turbomilling of SiC Whiskers; microwave sintering of silicon nitride; and milling characterization; processing of monolithics; silicon nitride matrix; oxide matrix; silicate matrix; thermal and wear coatings; joining; design; contact interfaces; time-dependent behavior; environmental effects; fracture mechanics; nondestructive evaluation; and technology transfer. References, figures, and tables are included with each topic.

  11. Technology Management on Large Construction Projects

    DEFF Research Database (Denmark)

    Bonke, Sten

    The aim of this text is to discuss and to develop the concept of technology management in relation to the empirical field of construction projects. In the first of the two main sections central theories and their derived assertions concerning technology management criteria are summed up...... in a schematic theoretical framework. Hereafter the general characteristics of construction are examined from the point of view of serving as an empirical field for technology management analysis. In the second section the technology management theme is associated with the empirical properties of the Great Belt...... Fixed Link construction project. Finally on this basis the concluding remarks are pointing to the main theoretical problems and their practical implementations for the introduction of a technology management discipline in construction....

  12. Projection display technologies for the new millennium

    Science.gov (United States)

    Kahn, Frederic J.

    2000-04-01

    Although analog CRTs continue to enable most of the world's electronic projection displays such as US consumer rear projection televisions, discrete pixel (digital) active matrix LCD and DLP reflective mirror array projectors have rapidly created large nonconsumer markets--primarily for business. Recent advances in image quality, compactness and cost effectiveness of digital projectors have the potential to revolutionize major consumer and entertainment markets as well. Digital penetration of the mainstream consumer projection TV market will begin in the hear 2000. By 2005 digital projection HDTVs could take the major share of the consumer HDTV projection market. Digital projection is expected to dominate both the consumer HDTV and the cinema market by 2010, resulting in potential shipments for all projection markets exceeding 10 M units per year. Digital projection is improving at a rate 10X faster than analog CRT projectors and 5X faster than PDP flat panels. Continued rapid improvement of digital projection is expected due to its relative immaturity and due to the wide diversity of technological improvements being pursued. Key technology enablers are the imaging panels, light sources and micro-optics. Market shares of single panel projectors, MEMs panels, LCOS panels and low T p-Si TFT LCD panel variants are expected to increase.

  13. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

  14. Fair Use Rights in the Digital World: A Phenomenological Study of Instructional Technology Specialists

    Science.gov (United States)

    Alakur, Turgay

    2015-01-01

    The aim of this study is to reveal an insight into the awareness and experiences of IT specialists about fair use in Turkey. A phenomenological design was employed and the criterion sampling method was used in this study. A total of nine specialists volunteered to participate. The data were collected through semi-structured interviews. Information…

  15. Teaching Physics Using Appropriate Technology Projects

    Science.gov (United States)

    Pearce, Joshua M.

    2007-03-01

    Appropriate technologies able to be easily and economically constructed from readily available materials by local craftspeople have a central role in the alleviation of poverty in the developing world. However, research and development of these technologies are generally apportioned relatively modest support by the developed world's institutions, in part because the operation of many of these appropriate technologies is dependent on relatively well-understood science accessible even to introductory college physics students. This paper describes a project-based assignment used to capitalize on this opportunity to motivate students to learn physics by offering them a chance to make concrete contributions to the optimization of appropriate technologies for sustainable development.

  16. Information Technology in Engineering and Project Management

    Directory of Open Access Journals (Sweden)

    Chien-Ho Ko

    2017-01-01

    Full Text Available Information Technology (IT can be regarded as the use of computers to store, analyze, and manipulate data (Daintith, 2009. With the rapid development of personal computers, IT has been widely applied in nearly every field (Davenport, 2013. This issue presents five papers covering engineering and project management, three of which focus on the application of IT to solve engineering and project management issues, while one presents research into public private partnerships, and another into cash flow forecasting.

  17. Project Management for Engineering, Business, and Technology

    CERN Document Server

    Nicholas, John M

    2012-01-01

    There is an ever-growing need for better project management within the disciplines of engineering, business and technology and this new edition is a direct response to that need. By emphasizing practical applications, this book targets the ultimate purpose of project management; to unify and integrate the interests, resources and work efforts of many stakeholders to accomplish the overall project goal. The book encompasses the essential background material, from philosophy to methodology, that is required, before dedicating itself to presenting concepts and techniques of practical application

  18. Ceramic Technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    The Ceramic Technology For Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DOD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic hearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  19. Working with Teachers to Develop Fair and Reliable Measures of Effective Teaching. MET Project

    Science.gov (United States)

    Bill & Melinda Gates Foundation, 2010

    2010-01-01

    In fall 2009, the Bill & Melinda Gates Foundation launched the Measures of Effective Teaching (MET) project to develop and test multiple measures of teacher effectiveness. The goal of the MET project is to improve the quality of information about teaching effectiveness available to education professionals within states and districts--information…

  20. ESA's Cloudscape: A Review of Projects Using Cloud Technology in ESA

    Science.gov (United States)

    O'Mullane, W.; Balseiro, J. F.

    2012-09-01

    Several projects in the space agency have flirted with cloud solutions, all with fairly positive results. In this talk a quick overview of the projects will be given. They span a large number of perhaps surprising areas. Much of ESA's videoconferencing is now done using cloud resources. Perhaps more than one might expect, several projects from earth observation to astronomy use cloud tech for data processing. Some more detail will be given from the Gaia perspective, as this is the authors' area of expertise. Within Gaia we have experimented with Amazon for data processing and are investigating how catalogue access might be facilitated with this technology.

  1. JUPITER PROJECT - MERGING INVERSE PROBLEM FORMULATION TECHNOLOGIES

    Science.gov (United States)

    The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project seeks to enhance and build on the technology and momentum behind two of the most popular sensitivity analysis, data assessment, calibration, and uncertainty analysis programs used in envi...

  2. Ceramic technology for Advanced Heat Engines Project

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1991-07-01

    Significant accomplishments in fabricating ceramic components for advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and database and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. This project is managed by ORNL for the Office of Transportation Technologies, Office of Transportation Materials, and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DOD, and industry.

  3. Geospatial Technologies: Real Projects in Real Classrooms

    Science.gov (United States)

    Kolvoord, Bob

    2008-01-01

    Geospatial technologies of geographic information systems, global positioning systems, and remote sensing are just a few of the projects that evoke an unexpected drive and devotion from high school students in Virginia. Their integration into different curricular areas lets students focus on understanding their community and the many issues that…

  4. NASA's Cryogenic Fluid Management Technology Project

    Science.gov (United States)

    Tramel, Terri L.; Motil, Susan M.

    2008-01-01

    The Cryogenic Fluid Management (CFM) Project's primary objective is to develop storage, transfer, and handling technologies for cryogens that will support the enabling of high performance cryogenic propulsion systems, lunar surface systems and economical ground operations. Such technologies can significantly reduce propellant launch mass and required on-orbit margins, reduce or even eliminate propellant tank fluid boil-off losses for long term missions, and simplify vehicle operations. This paper will present the status of the specific technologies that the CFM Project is developing. The two main areas of concentration are analysis models development and CFM hardware development. The project develops analysis tools and models based on thermodynamics, hydrodynamics, and existing flight/test data. These tools assist in the development of pressure/thermal control devices (such as the Thermodynamic Vent System (TVS), and Multi-layer insulation); with the ultimate goal being to develop a mature set of tools and models that can characterize the performance of the pressure/thermal control devices incorporated in the design of an entire CFM system with minimal cryogen loss. The project does hardware development and testing to verify our understanding of the physical principles involved, and to validate the performance of CFM components, subsystems and systems. This database provides information to anchor our analytical models. This paper describes some of the current activities of the NASA's Cryogenic Fluid Management Project.

  5. The New Mexico Technology Deployment Pilot Project: A technology reinvestment project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The New Mexico Technology Deployment Project (NMTDP) has been in operation for slightly more than two years. As one of the original TRP projects, NMTDP had the charter to develop and validate a new model for technology extraction which emphasized focused technology collaboration, early industry involvement, and a strong dual use commercialization and productization emphasis. Taken in total, the first two years of the NMTDP have been exceptionally successful, surpassing the goals of the project. This report describes the accomplishments and evolution of the NMTDP to date and discusses the future potential of the project. Despite the end of federal funding, and a subsequent reduction in level of effort, the project partners are committed to continuation of the project.

  6. Biologically inspired technologies in NASA's morphing project

    Science.gov (United States)

    McGowan, Anna-Maria R.; Cox, David E.; Lazos, Barry S.; Waszak, Martin R.; Raney, David L.; Siochi, Emilie J.; Pao, S. Paul

    2003-07-01

    For centuries, biology has provided fertile ground for hypothesis, discovery, and inspiration. Time-tested methods used in nature are being used as a basis for several research studies conducted at the NASA Langley Research Center as a part of Morphing Project, which develops and assesses breakthrough vehicle technologies. These studies range from low drag airfoil design guided by marine and avian morphologies to soaring techniques inspired by birds and the study of small flexible wing vehicles. Biology often suggests unconventional yet effective approaches such as non-planar wings, dynamic soaring, exploiting aeroelastic effects, collaborative control, flapping, and fibrous active materials. These approaches and other novel technologies for future flight vehicles are being studied in NASA's Morphing Project. This paper will discuss recent findings in the aeronautics-based, biologically-inspired research in the project.

  7. Photovoltaic concentrator technology development project. Sixth project integration meeting

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    Thirty-three abstracts and short papers are presented which describe the current status of research, development, and demonstration of concentrator solar cell technology. Solar concentrators discussed include the parabolic trough, linear focus Fresnel lens, point focus Fresnel lens, and the parabolic dish. Solar cells studied include silicon, GaAs, and AlGaAs. Research on multiple junction cells, combined photovoltaic/thermal collectors, back contact solar cells, and beam splitter modules is described. Concentrator solar cell demonstration programs are reported. Contractor status summaries are given for 33 US DOE concentrator solar cell contracts; a description of the project, project status, and key results to date is included. (WHK)

  8. Exam fairness

    CERN Document Server

    Bouville, Mathieu

    2008-01-01

    It is widely agreed that exams must be fair; yet what this exactly means is not made clear. One may mean fairness of treatment, but this merely propagates the fairness or unfairness of pre-existing rules. Fairness of opportunity on the other hand necessarily leads to identical grades for everyone, which clearly makes it inapplicable. Neither view is helpful to make decisions on competing claims: fairness of treatment ignores the problem and fairness of opportunity holds all claims to be equally valid. To escape this deadlock one needs an external criterion to replace fairness viewed as student-student comparison. Keywords: assessment; bias; engineering education; examinations; grading; justice; tests

  9. A National Science Fair: Exhibiting Support for the Knowledge Economy

    Science.gov (United States)

    Bencze, John Lawrence; Bowen, Gervase Michael

    2009-01-01

    Student-directed, open-ended scientific investigations and invention projects may serve to deepen and broaden students' scientific and technological literacy, and, in so doing, enable them to succeed in democracies greatly affected by processes and products of science and technology. Science fairs, events at which student-led projects are…

  10. Pilot Project Technology Business Case: Mobile Work Packages

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lawrie, Sean [ScottMadden, Inc., Raleigh, NC (United States); Niedermuller, Josef [ScottMadden, Inc., Raleigh, NC (United States)

    2015-05-01

    Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are

  11. Thermodynamic Properties of Fast Ramped Superconducting Accelerator Magnets for the Fair Project

    Science.gov (United States)

    Fischer, E.; Mierau, A.; Schnizer, P.; Bleile, A.; Gärtner, W.; Guymenuk, O.; Khodzhibagiyan, H.; Schroeder, C.; Sikler, G.; Stafiniak, A.

    2010-04-01

    The 100 Tm synchrotron SIS 100 is the core component of the international Facility of Antiproton and Ion Research (FAIR) to be built at GSI Darmstadt. The 108 bending magnets are 3 m long 2 T superferric dipoles providing a nominal ramp rate of 4 T/s within a usable aperture of 115 mmṡ60 mm. An intensive R&D period was conducted to minimise the AC losses to lower operation costs and to guarantee a safe thermal stability for long term continuous cycling with a maximum repetition frequency of 1 Hz. The latter requirement is strictly limited by the overall heat flow originated by eddy currents and hysteresis losses in iron yoke and coil as well as by its hydraulic resistance respective to the forced two phase helium cooling flow within the hollow superconducting cable. Recently three full size dipoles—and one quadrupole magnets were built and intensive tests have been started in the end of 2008 at the GSI cryogenic test facility. We present the measured thermodynamic parameters of the first tested dipole: AC losses depending on Bmax and dB/dt for various characteristic ramping modes and conclude for necessary optimisations toward the final design of the series magnets.

  12. Hypernuclear Spectroscopy with Stable Heavy Ion Beams and Rare-isotope Beams:HypHI Project at GSI and FAIR

    Institute of Scientific and Technical Information of China (English)

    T.R.Saito

    2009-01-01

    The international HypHI collaboration proposes to perform hypernuclear spectroscopy with stable heavy ion beams and rare isotope beams at GSI and FAIR in order to study neutron and proton rich hypernuclei and to measure directly hypernuclear magnetic moments for the first time.The project is divided into four phases.In the first Phase 0 experiment,the feasibility of precise hypernuclear spectroscopy with heavy ion beams will be demonstrated by observing π~- decay channels of ~e_ΛH,~4_ΛH and ~5_ΛHe with ~6Li projectiles at 2 AGeV impinging on a ~(12)C target.In the later Phases 1 through 3,studies of proton and neutron rich hypernuclei,direct measurements of hypernuclear magnetic moments and the spectroscopy of hypernuclei toward the nucleon drip-lines are planned.

  13. The HypHI project: Hypernuclear spectroscopy with stable heavy ion beams and rare isotope beams at GSI and FAIR

    CERN Document Server

    Bianchin, S; Ajimura, S; Borodina, O; Fukuda, T; Hoffmann, J; Kavatsyuk, M; Koch, K; Koike, T; Kurz, N; Maas, F; Minami, S; Mizoi, Y; Nagae, T; Nakajima, D; Okamura, A; Ott, W; Özel, B; Pochodzalla, J; Rappold, C; Saito, T R; Sakaguchi, A; Sako, M; Sekimoto, M; Sugimura, H; Takahashi, T; Tamura, H; Tanida, K; Trautmann, W

    2008-01-01

    The HypHI collaboration aims to perform a precise hypernuclear spectroscopy with stable heavy ion beams and rare isotope beams at GSI and fAIR in order to study hypernuclei at extreme isospin, especially neutron rich hypernuclei to look insight hyperon-nucleon interactions in the neutron rich medium, and hypernuclear magnetic moments to investigate baryon properties in the nuclei. We are currently preparing for the first experiment with $^6$Li and $^{12}$C beams at 2 AGeV to demonstrate the feasibility of a precise hypernuclear spectroscopy by identifying $^{3}_{\\Lambda}$H, $^{4}_{\\Lambda}$H and $^{5}_{\\Lambda}$He. The first physics experiment on these hypernuclei is planned for 2009. In the present document, an overview of the HypHI project and the details of this first experiment will be discussed.

  14. How Fair is Fair Trade?

    NARCIS (Netherlands)

    Vaal, A. de; Maseland, R.K.J.

    2001-01-01

    This paper investigates to what extent fair trade programmes, are indeed fair . This is accomplished by comparing fair trade with free trade and protectionist trade regimes on their compliance of the criteria set by the fair trade movement itself. This comparison is made using comparative cost base

  15. How Fair is Fair Trade?

    NARCIS (Netherlands)

    Maseland, R.K.J.; Vaal, A. de

    2002-01-01

    This paper investigates to what extent fair trade programmes, are indeed ‘fair.’ This is accomplished by comparing fair trade with free trade and protectionist trade regimes on their compliance of the criteria set by the fair trade movement itself. This comparison is made using comparative cost base

  16. How Fair is Fair Trade?

    NARCIS (Netherlands)

    Vaal, A. de; Maseland, R.K.J.

    2001-01-01

    This paper investigates to what extent fair trade programmes, are indeed fair . This is accomplished by comparing fair trade with free trade and protectionist trade regimes on their compliance of the criteria set by the fair trade movement itself. This comparison is made using comparative cost base

  17. How Fair is Fair Trade?

    NARCIS (Netherlands)

    Maseland, R.K.J.; Vaal, A. de

    2002-01-01

    This paper investigates to what extent fair trade programmes, are indeed ‘fair.’ This is accomplished by comparing fair trade with free trade and protectionist trade regimes on their compliance of the criteria set by the fair trade movement itself. This comparison is made using comparative cost base

  18. HYPERNUCLEAR SPECTROSCOPY WITH HEAVY ION BEAMS : THE HypHI PROJECT AT GSI AND FAIR

    NARCIS (Netherlands)

    Saito, T. R.; Bianchin, S.; Borodina, O.; Hoffmann, J.; Koch, K.; Kurz, N.; Maas, F.; Minami, S.; Nakajima, D.; Ott, W.; Oezel, B.; Rappold, C.; Schmidt, C.; Trautmann, W.; Traeger, M.; Voltz, S.; Achenbach, P.; Pochodzalla, J.; Sekimoto, M.; Takahashi, T.; Kavatsyuk, M.; Hayashi, Y.; Hiraiwa, T.; Moritsu, M.; Nagae, T.; Okamura, A.; Sako, M.; Sugimura, H.; Tanida, K.; Fukuda, T.; Mizoi, Y.; Ajimura, S.; Mochizuki, T.; Sakaguchi, A.; Koike, T.; Tamura, H.

    2010-01-01

    The HypHI experiment for precise hypernuclear spectroscopy with induced reactions of stable heavy ion beams and rare isotope beams is currently under preparation at GSI. The main goal of the HypHI project is to study neutron and proton rich hypernuclei and to measure directly hypernuclear magnetic m

  19. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...

  20. Reliability and Validity: A Sine Qua Non for Fair Assessment of Undergraduate Technical and Vocational Education Projects in Nigerian Universities

    Science.gov (United States)

    John, A. C.

    2015-01-01

    The aim of the study was to examine the importance of reliability and validity as necessary foundation for fair assessment. The concepts of reliability, validity, fair assessment and their relationships were analysed. Qualities of fair assessment were discussed. A number of recommendations were made to make assessors be more cautious in award of…

  1. National Security Technology Incubation Project Continuation Plan

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-09-30

    This document contains a project continuation plan for the National Security Technology Incubator (NSTI). The plan was developed as part of the National Security Preparedness Project (NSPP) funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This continuation plan describes the current status of NSTI (staffing and clients), long-term goals, strategies, and long-term financial solvency goals.The Arrowhead Center of New Mexico State University (NMSU) is the operator and manager of the NSTI. To realize the NSTI, Arrowhead Center must meet several performance objectives related to planning, development, execution, evaluation, and sustainability. This continuation plan is critical to the success of NSTI in its mission of incubating businesses with security technology products and services.

  2. Supporting Project Work with Information Technology

    DEFF Research Database (Denmark)

    Heilesen, Simon

    2015-01-01

    Like so many other institutions, Roskilde University has had to adapt to the new realities brought about by the rapid developments in information and communication technology (ICT). On the whole, ICT tools have proven to be helpful in supporting and developing the work forms on which Roskilde...... University problem-oriented project work is based. However, in implementing and integrating the new technologies in academic practices, a number of challenges have had to be addressed. This chapter discusses four of these challenges. The first is to provide a physical and virtual framework for learning...... activities. The second is to direct student use of ICT in terms of making systems available and teaching academic computing. The third challenge is to supervise and conduct project work online and in blended learning environments. Finally, one must find a way to exploit the potentials of ICT in problem...

  3. Advanced Turbine Technology Applications Project (ATTAP)

    Science.gov (United States)

    1993-01-01

    This report is the fifth in a series of Annual Technical Summary Reports for the Advanced Turbine Technology Applications Project (ATTAP), sponsored by the U.S. Department of Energy (DOE). The report was prepared by Garrett Auxiliary Power Division (GAPD), a unit of Allied-Signal Aerospace Company, a unit of Allied Signal, Inc. The report includes information provided by Garrett Ceramic Components, and the Norton Advanced Ceramics Company, (formerly Norton/TRW Ceramics), subcontractors to GAPD on the ATTAP. This report covers plans and progress on ceramics development for commercial automotive applications over the period 1 Jan. through 31 Dec. 1992. Project effort conducted under this contract is part of the DOE Gas Turbine Highway Vehicle System program. This program is directed to provide the U.S. automotive industry the high-risk, long-range technology necessary to produce gas turbine engines for automobiles with reduced fuel consumption, reduced environmental impact, and a decreased reliance on scarce materials and resources. The program is oriented toward developing the high-risk technology of ceramic structural component design and fabrication, such that industry can carry this technology forward to production in the 1990's. The ATTAP test bed engine, carried over from the previous AGT101 project, is being used for verification testing of the durability of next generation ceramic components, and their suitability for service at Reference Powertrain Design conditions. This document reports the technical effort conducted by GAPD and the ATTAP subcontractors during the fifth year of the project. Topics covered include ceramic processing definition and refinement, design improvements to the ATTAP test bed engine and test rigs, and the methodology development of ceramic impact and fracture mechanisms. Appendices include reports by ATTAP subcontractors in the development of silicon nitride materials and processes.

  4. Academe, Technology, Society, and the Market: Four Frames of Reference for Copyright and Fair Use.

    Science.gov (United States)

    Metcalfe, Amy; Diaz, Veronica; Wagoner, Richard

    2003-01-01

    Suggests that varied and often understated uses of copyrighted materials exist in academic settings. Introduces four "frames" of reference: Academic, Technological, Social, and Market. Presents court cases relevant to each frame. Explores two scenarios involving use of copyrighted materials. As technology increases both access and control, the…

  5. Advanced Gas Turbine (AGT) technology development project

    Science.gov (United States)

    1987-01-01

    This report is the final in a series of Technical Summary Reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorizrd under NASA Contract DEN3-167 and sponsored by the DOE. The project was administered by NASA-Lewis Research Center of Cleveland, Ohio. Plans and progress are summarized for the period October 1979 through June 1987. This program aims to provide the US automotive industry the high risk, long range technology necessary to produce gas turbine engines for automobiles that will reduce fuel consumption and reduce environmental impact. The intent is that this technology will reach the marketplace by the 1990s. The Garrett/Ford automotive AGT was designated AGT101. The AGT101 is a 74.5 kW (100 shp) engine, capable of speeds to 100,000 rpm, and operates at turbine inlet temperatures to 1370 C (2500 F) with a specific fuel consumption level of 0.18 kg/kW-hr (0.3 lbs/hp-hr) over most of the operating range. This final report summarizes the powertrain design, power section development and component/ceramic technology development.

  6. Fair skoleledelse

    DEFF Research Database (Denmark)

    Larsen, Peter; Vestergaard, Bo

    2014-01-01

    relationelle strategiske ledelsesprocesser (RSL-processer) mellem ledelse og medarbejdere i organisationers strategiarbejde. I artiklens anden del oversættes den teoretiske del til et praksisorienteret ottefaset strategisk procesdesign: FAIR SKOLELEDELSE. FAIR SKOLELEDELSE er et strategisk tanke- og...

  7. Fair Trade

    OpenAIRE

    2007-01-01

    This paper deals with the behavior of fair trade organizations in an oligopolistic setting in which the vertically integrated fair trade firm produces a commodity which is a weak substitute for another commodity. Profit-maximizing oligopolists are vertically disintegrated and produce for both markets and the fair trade firm can charge a premium to consumers due to a "warm glow effect" that depends on the wage paid to fair trade producers. We show that trade integration will unambiguously incr...

  8. Workplace Factors That Shape Information Technology Project Success

    Science.gov (United States)

    Nguyen, Dan Schilling

    2013-01-01

    Information technology (IT) project success depends on having a project manager with effective decision making, leadership, and project management skills. Project success also depends on completing the project in a given budget, time, and scope. Despite these critical qualities of a successful project manager, little research has explored the…

  9. Super Science Fair Sourcebook.

    Science.gov (United States)

    Iritz, Maxine Haren

    This guide to science fair projects is designed for students and provides clear directions on how to complete a successful science project. Real projects are used as examples and information and advice is provided by teachers, judges, and participants and their families about the process. Topics covered in this book include choosing a science fair…

  10. A Distributed Algorithm for Fair and Efficient User-Network Association in Multi-Technology Wireless Networks

    CERN Document Server

    Touati, Corinne; Gaujal, Bruno

    2008-01-01

    Recent mobile equipment (as well as the norm IEEE 802.21) now offers the possibility for users to switch from one technology to another (vertical handover). This allows flexibility in resource assignments and, consequently, increases the potential throughput allocated to each user. In this paper, we design a fully distributed algorithm based on trial and error mechanisms that exploits the benefits of vertical handover by finding fair and efficient assignment schemes. On the one hand, mobiles gradually update the fraction of data packets they send to each network based on the rewards they receive from the stations. On the other hand, network stations send rewards to each mobile that represent the impact each mobile has on the cell throughput. This reward function is closely related to the concept of marginal cost in the pricing literature. Both the station and the mobile algorithms are simple enough to be implemented in current standard equipment. Based on tools from evolutionary games, potential games and rep...

  11. How Fair Is Actuarial Fairness?

    DEFF Research Database (Denmark)

    Landes, Xavier

    2015-01-01

    in exchange for the payment of premi- ums. In the insurance industry, the concept of actuarial fairness serves to establish what could be adequate, fair premiums. Accordingly, premiums paid by policyholders should match as closely as possible their risk exposure (i.e. their expected losses). Such premiums...... are the product of the probabilities of losses and the expected losses. This article presents a discussion of the fairness of actuarial fairness through three steps: (1) defining the concept based on its formulation within the insurance industry; (2) determining in which sense it may be about fairness; and (3......) raising some objections to the actual fairness of actu- arial fairness. The necessity of a normative evaluation of actuarial fairness is justified by the influence of the concept on the current reforms of public insurance systems and the fact that it highlights the question of the repartition of the gains...

  12. Collaborative Simulation and Testing of the Superconducting Dipole Prototype Magnet for the FAIR Project

    Institute of Scientific and Technical Information of China (English)

    ZHU Yinfeng; ZHU Zhe; XU Houchang; WU Weiyue

    2012-01-01

    The superconducting dipole prototype magnet of the collector ring for the Facility for Antiproton and Ion Research (FAIR) is an international cooperation project. The collaborative simulation and testing of the developed prototype magnet is presented in this paper. To evaluate the mechanical strength of the coil case during quench, a 3-dimensional (3D) electromagnetic (EM) model was developed based on the solid97 magnetic vector element in the ANSYS commercial software, which includes the air region, coil and yoke. EM analysis was carried out with a peak operating current at 278 A. Then, the solid97 element was transferred into the solid185 element, the coupled analysis was switched from electromagnetic to structural, and the finite element model for the coil case and glass-fiber reinforced composite (G10) spacers was established by the ANSYS Parametric Design Language based on the 3D model from the CATIA V5 software. However, to simulate the friction characteristics inside the coil case, the conta173 surface-to-surface contact element was established. The results for the coil case and G10 spacers show that they are safe and have sufficient strength, on the basis of testing in discharge and quench scenarios.

  13. Science Fairs: The Whys and Hows.

    Science.gov (United States)

    Edelman, Phyllis

    1988-01-01

    There has been some evidence that students who develop projects for science fairs continue their interest in science through high school and beyond. Local and regional fairs generally are slated as a prelude to state science fairs and the International Science and Engineering Fair (ISEF). Organizing a district science fair requires informed…

  14. Implementing the Precautionary Principle: incorporating science, technology, fairness, and accountability in environmental, health, and safety decisions.

    Science.gov (United States)

    Ashford, Nicholas A

    2004-01-01

    The Precautionary Principle is in sharp political focus today because: 1) the nature of scientific uncertainty is changing, and 2) there is increasing pressure to base governmental action on more "rational" schemes, such as cost-benefit analysis and quantitative risk assessment, the former being an embodiment of "rational choice theory" promoted by the Chicago School of Law and Economics. The Precautionary Principle has been criticized as being both too vague and too arbitrary to form a basis for rational decision making. The assumption underlying this criticism is that any scheme not based on cost-benefit analysis and risk assessment is both irrational and without secure foundation in either science or economics. This paper contests that view and makes explicit the rational tenets of the Precautionary Principle within an analytical framework as rigorous as uncertainties permit, and one that mirrors democratic values embodied in regulatory, compensatory, and common law. Unlike other formulations that reject risk assessment, this paper argues that risk assessment can be used within the formalism of tradeoff analysis--a more appropriate alternative to traditional cost-benefit analysis and one that satisfies the need for well-grounded public policy decision making. This paper will argue that the precautionary approach is the most appropriate basis for policy, even when large uncertainties do not exist, especially where the fairness of the distributions of costs and benefits of hazardous activities and products are a concern. Furthermore, it will offer an approach to making decisions within an analytic framework, based on equity and justice, to replace the economic paradigm of utilitarian cost-benefit analysis.

  15. China Fairs & Expos

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Agriculture,Fishery,Animal Husbandry2010 China Husbandry and New Technology,New Product, New Equipment Promotion and Trade Fair Date: April 16-April 18, 2010 Frequency: Yearly Venue: Fujian Economic and Trade Exhibition

  16. How Fair are Fair Allocations?

    DEFF Research Database (Denmark)

    Wøhlk, Sanne; Kiilerich, Lone

    investigates the fairness of such allocations. Previous literature has applied numerous ways of measuring allocation fairness as well as numerous strategies for obtaining allocations. The goal of this paper is to study the fairness of allocations obtained by different allocation methods as viewed by different...... fairness measures. We hope that this will help guide future research towards a rational choice of allocation methods and measures....

  17. How fair is fair trade?

    NARCIS (Netherlands)

    Maseland, Robbert; Vaal, Albert de

    2001-01-01

    This paper investigates to what extent fair trade programmes, are indeed ‘fair’. This is accomplished by comparing fair trade with free trade and protectionist trade regimes on their compliance of the criteria set by the fair trade movement itself. This comparison is made using comparative cost base

  18. How fair is fair trade?

    NARCIS (Netherlands)

    Maseland, Robbert; Vaal, Albert de

    2001-01-01

    This paper investigates to what extent fair trade programmes, are indeed ‘fair’. This is accomplished by comparing fair trade with free trade and protectionist trade regimes on their compliance of the criteria set by the fair trade movement itself. This comparison is made using comparative cost

  19. How fair is fair trade?

    NARCIS (Netherlands)

    Maseland, Robbert; Vaal, Albert de

    2001-01-01

    This paper investigates to what extent fair trade programmes, are indeed ‘fair’. This is accomplished by comparing fair trade with free trade and protectionist trade regimes on their compliance of the criteria set by the fair trade movement itself. This comparison is made using comparative cost base

  20. Information technology project risk management in Peru

    OpenAIRE

    Del Carpio Gallegos, Javier; Universidad Nacional Mayor de San Marcos

    2014-01-01

    This article shows how some principles, uses, and practices of risk management are applied in information technology projects in Peru; in the last four years, in representative sectors like manufacturing, banking, information and communications, academics institutions, construction, government, consulting, services, and others. El presente artículo muestra algunos principios, usos y prácticas de cómo la gestión de riesgos de proyectos de tecnología se ha llevado a cabo en los últimos cuatr...

  1. Venture Leaders Prize for innovative technology projects

    CERN Multimedia

    2006-01-01

    In co-operation with the GEBERT RÜF FOUNDATION and the Ernest & Young Entrepreneur of the Year Award, venturelab will be presenting the Venture Leaders Prize. The Venture Leaders Prize, which is the new guise of the NETS (New Entrepreneurs in Technology and Science) Prize, will give twenty research entrepreneurs with projects to develop innovative technologies the opportunity to win the chance of participating in a programme to assist them in starting up their companies. The winners will go to spend 10 days in the Boston area (United States) where they will take part in a development programme for their project, which will include an entrepreneurship course, opportunities to meet start-up companies and financing experts, etc. This prize has already spawned many companies such as id Quantique, Selexis or ABMI which have contributed to the economic development of regions, particularly in French-speaking Switzerland. The competition is open to students and scientists from all fields, who would like to s...

  2. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2008-03-12

    Pacific Northwest National Laboratory researchers are working on the Columbia River Protection Supplemental Technologies Project. This project is a U. S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies, and technologies for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by the Technologies Project staff.

  3. Ceramic Technology Project database: March 1990 summary report. DOE/ORNL Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-07-01

    This report is the fifth in a series of semiannual data summary reports on information being stored in the Ceramic Technology Project (CTP) database. The overall system status as of March 31, 1990, is summarized, and the latest additions of ceramic mechanical properties data are given for zirconia, silicon carbide, and silicon nitride ceramic mechanical properties data, including some properties on brazed specimens.

  4. Small Hydropower Research and Development Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blackmore, Mo [Near Space Systems, Inc.

    2013-12-06

    The objective of this work was to investigate, develop, and validate the next generation of small hydroturbine generator designs that maximize the energy transfer from flowing water to electrical power generation. What resulted from this effort was the design of a new technology hydroturbine that Near Space Systems (NSS) has named the Star*Stream© Hydroturbine. Using a design that eliminates nearly all of the shortfalls of conventional hydroturbines, the Star*Stream© Hydroturbine employs a new mechanical-to-electrical energy transfer hydro design that operates without lubrication of any kind, and does not introduce foreign chemicals or particulate matter from oil or drive shaft seal degradation into the hydro ecology. In its unique configuration, the Star*Stream© Hydroturbine is nearly environmentally inert, without the negative aspects caused by interrupting the ecological continuity, i.e., disruptions to sedimentation, water quality, habitat changes, human displacement, fish migration, etc., - while it ensures dramatically reduced timeframes to project completion. While a remarkable reduction in LCOE resulting from application of the Star*Stream© Hydroturbine technology has been the core achievement of the this effort, there have been numerous technological breakthroughs from the development effort.

  5. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  6. 30 CFR 402.11 - Technology-development project applications.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Technology-development project applications... RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Application, Evaluation, and Management Procedures § 402.11 Technology-development project applications. (a) Grant awards will be used...

  7. I-5/Gilman advanced technology bridge project

    Science.gov (United States)

    Lanza di Scalea, Francesco; Karbhari, Vistasp M.; Seible, Frieder

    2000-04-01

    The UCSD led I-5/Gilman Advanced Technology Bridge Project will design and construct a fully functional traffic bridge of advanced composite materials across Interstate 5 in La Jolla, California. Its objective is to demonstrate the use of advanced composite technologies developed by the aerospace industry in commercial applications to increase the life expectancy of new structures and for the rehabilitation of aging infrastructure components. The structure will be a 450 ft long, 60 ft wide cable-stayed bridge supported by a 150 ft A-frame pylon with two vehicular lanes, two bicycle lanes, pedestrian walkways and utility tunnels. The longitudinal girders and pylon will be carbon fiber shells filled with concrete. The transverse deck system will consist of hollow glass/carbon hybrid tubes and a polypropylene fiber reinforced concrete deck with an arch action. Selected cables will be composite. The bridge's structural behavior will be monitored to determine how advanced composite materials perform in civil infrastructure applications. The bridge will be instrumented to obtain performance and structural health data in real time and, where possible, in a remote fashion. The sensors applied to the bridge will include electrical resistance strain gages, fiberoptic Bragg gratings and accelerometers.

  8. Nuclear Systems (NS): Technology Demonstration Unit (TDU) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Nuclear Systems Project demonstrates nuclear power technology readiness to support the goals of NASA’s Space Technology Mission Directorate. To this end,...

  9. Solid State Electrolyte for Li Battery Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration —  The fabrication technology developed in this project will aid GRC in advancing  Lithium Ion Batteries (LIB) technology by developing new electrode and SSE...

  10. Fair Isle

    OpenAIRE

    2011-01-01

    An analyses of the name Fair Isle. It is argued that the name is likely to be linked to more than 20 other similar names, mostly Færøy in Norway, and that the etymology is from Old Norse fara and ferd, 'travel, journey'. The motive behind the names is the importance of these islands for travel, and Fair Isle between Orkney and Shetland exceptionally so.

  11. Fair Testing

    OpenAIRE

    1995-01-01

    We investigate the notion of fair testing, a formal testing theory in the style of De Nicola and Hennessy where divergences are disregarded as long as there are visible outgoing transitions. The usual testing theories, such as the standard model of failure pre-order, do not allow such fair interpretations because of the way in which they ensure their compositionality with respect to abstraction from observable actions. This feature is usually present in the form of a hiding-operator (CSP, ACP...

  12. Milliken Clean Coal Technology Demonstration Project. Project performance summary, Clean Coal Technology Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-11-30

    The New York State Electric & Gas Corporation (NYSEG) demonstrated a combination of technologies at its Milliken Station in Lansing, New York, designed to: (1) achieve high sulfur dioxide (SO2) capture efficiency, (2) bring nitrogen oxide (NOx) emissions into compliance with Clean Air Act Amendments of 1990 (CAAA), (3) maintain high station efficiency, and (4) eliminate waste water discharge. This project is part of the U.S. Department of Energy's (DOE) Clean Coal Technology Demonstration Program (CCTDP) established to address energy and environmental concerns related to coal use. DOE sought cost-shared partnerships with industry through five nationally competed solicitations to accelerate commercialization of the most promising advance coal-based power generation and pollution control technologies. The CCTDP, valued at over five billion dollars, has significantly leveraged federal funding by forging effective partnerships founded on sound principles. For every federal dollar invested, CCTDP participants have invested two dollars. These participants include utilities, technology developers, state governments, and research organizations. The project presented here was one of nine selected in January 1991 from 33 proposals submitted in response to the program's fourth solicitation.

  13. Milliken Clean Coal Technology Demonstration Project. Project performance summary, Clean Coal Technology Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-11-30

    The New York State Electric & Gas Corporation (NYSEG) demonstrated a combination of technologies at its Milliken Station in Lansing, New York, designed to: (1) achieve high sulfur dioxide (SO2) capture efficiency, (2) bring nitrogen oxide (NOx) emissions into compliance with Clean Air Act Amendments of 1990 (CAAA), (3) maintain high station efficiency, and (4) eliminate waste water discharge. This project is part of the U.S. Department of Energy's (DOE) Clean Coal Technology Demonstration Program (CCTDP) established to address energy and environmental concerns related to coal use. DOE sought cost-shared partnerships with industry through five nationally competed solicitations to accelerate commercialization of the most promising advance coal-based power generation and pollution control technologies. The CCTDP, valued at over five billion dollars, has significantly leveraged federal funding by forging effective partnerships founded on sound principles. For every federal dollar invested, CCTDP participants have invested two dollars. These participants include utilities, technology developers, state governments, and research organizations. The project presented here was one of nine selected in January 1991 from 33 proposals submitted in response to the program's fourth solicitation.

  14. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne, CH and P. BRUZZONE / CRPP-EPFL, Zürich, CH The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the...

  15. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne and P. BRUZZONE / CRPP-EPFL, Zürich The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the de...

  16. On 18 November 2010, CERN signed an agreement with the Facility for Antiproton and Ion Research (FAIR) GmbH, the company that is co-ordinating the construction of the accelerator and experiment facilities for the FAIR project in Germany.

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    The agreement, which was signed by CERN's director-general, Rolf Heuer (left) and FAIR's scientific director Boris Sharkov, concerns collaboration in accelerator sciences and technologies and other scientific domains of mutual interest.

  17. Introducing New Technology

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The 5th China Fujian Technology and Project Fair (CFTPF) will be held from June 18 to 20 this year. Established in 2003, the CFTPF is one of the most impor - tant fairs for promoting advanced science and technological products for the benefit of Chinese

  18. Science and Technology Roadmapping to Support Project Planning

    Energy Technology Data Exchange (ETDEWEB)

    Mc Carthy, Jeremiah Justin; Haley, Daniel Joseph; Dixon, Brent Wayne

    2001-07-01

    Disciplined science and technology roadmapping provides a framework to coordinate research and development activities with project objectives. This case-history paper describes initial project technology needs identification, assessment and R&D ranking activities supporting characterization of 781 waste tanks requiring a 'hazardous waste determination' or 'verification of empty' decision to meet an Idaho state Voluntary Consent Order.

  19. THE HYPHI PROJECT : HYPERNUCLEAR SPECTROSCOPY WITH STABLE HEAVY ION BEAMS AND RARE ISOTOPE BEAMS AT GSI AND FAIR

    NARCIS (Netherlands)

    Bianchin, S.; Achenbach, P.; Ajimura, S.; Borodina, O.; Fukuda, T.; Hoffmann, J.; Kavatsyuk, M.; Koch, K.; Koike, T.; Kurz, N.; Maas, F.; Minami, S.; Mizoi, Y.; Nagae, T.; Nakajima, D.; Okamura, A.; Ott, W.; Ozel, B.; Pochodzalla, J.; Rappold, C.; Saito, T. R.; Sakaguchi, A.; Sako, M.; Sekimoto, M.; Sugimura, H.; Takahashi, T.; Tamura, H.; Tanida, K.; Trautmann, W.

    2009-01-01

    The HypHI collaboration aims to perform a precise hypernuclear spectroscopy with stable heavy ion beams and rare isotope beams at GSI and FAIR in order to study hypernuclei at extreme isospin, especially neutron rich hypernuclei to look insight hyperon-nucleon interactions in the neutron rich medium

  20. Manufacturing Methods and Technology Project Summary Reports.

    Science.gov (United States)

    1980-12-01

    as high speed machining. Except for the abrasive aluminum alloys like A356 which must be machined with carbide, either carbide or high speed steel...Shear Forging Processes for Missile 82 Primary Structure Project 376 3230 - Manufacturing Methods for High Speed Machining of 85 Aluminum Project 376 3231...Production Methods for Squeeze Castings 88 Projects 471 4312 and 472 4312 - Hard Face Coating to Aluminum Com- 91 ponents Project 576 6759

  1. Evaluation of Representative Smart Grid Investment Project Technologies: Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Prakash Kumar, Nirupama; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of a limited number of demand response technologies and implementations deployed in the SGIG projects.

  2. Assessing the Relationship between Ethical Project Management and Information Technology Project Success

    Science.gov (United States)

    Howell, Byron Winter

    2010-01-01

    The purpose of this quantitative study was to assess the relationship between ethical project management and information technology (IT) project success. The success of IT projects is important for organizational success, but the rate of IT projects is historically low, costing billions of dollars annually. Using four key ethical variables…

  3. An overview of the Communications Technology Satellite (CTS) project

    Science.gov (United States)

    Rapp, W.; Ogden, D.; Wright, D.

    1982-01-01

    The Communications Technology Satellite (CTS) project is reviewed. A technical description of the CTS spacecraft and its cognate hardware and operations is included. A historical treatise of the CTS project is provided. Also presented is an overview of the CTS experiments and demonstrations conducted during the course of the project.

  4. The Columbia River Protection Supplemental Technologies Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2007-01-10

    The U.S. Department of Energy (DOE) has conducted interim groundwater remedial activities on the Hanford Site since the mid-1990s for several groundwater contamination plumes. DOE established the Columbia River Protection Supplemental Technologies Project (Technologies Project) in 2006 to evaluate alternative treatment technologies. The objectives for the technology project are as follows: develop a 300 Area polyphosphate treatability test to immobilize uranium, design and test infiltration of a phosphate/apatite technology for Sr-90 at 100-N, perform carbon tetrachloride and chloroform attenuation parameter studies, perform vadose zone chromium characterization and geochemistry studies, perform in situ biostimulation of chromium studies for a reducing barrier at 100-D, and perform a treatability test for phytoremediation for Sr-90 at 100-N. This document provides the quality assurance guidelines that will be followed by the Technologies Project. This Quality Assurance Project Plan is based on the quality assurance requirements of DOE Order 414.1C, Quality Assurance, and 10 CFR 830, Subpart A--Quality Assurance Requirements as delineated in Pacific Northwest National Laboratory’s Standards-Based Management System. In addition, the technology project is subject to the Environmental Protection Agency (EPA) Requirements for Quality Assurance Project Plans (EPA/240/B-01/003, QA/R-5). The Hanford Analytical Services Quality Assurance Requirements Documents (HASQARD, DOE/RL-96-68) apply to portions of this project and to the subcontractors. HASQARD requirements are discussed within applicable sections of this plan.

  5. Propulsive Descent Technologies (PDT): Original Content Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Future missions to Mars require landed mass that exceeds the capability of current entry, descent, and landing technology.  New technology and techniques are...

  6. Critical success factors in information technology projects

    Directory of Open Access Journals (Sweden)

    Ayesha

    2017-02-01

    Full Text Available The purpose of this study is to determine the critical success factors (CSF of IT projects in Pa-kistan. The identified factors cannot only be functional to exact type IT projects but also to all types of IT projects, their success directly affects the achievement of whole organization. The proposed study of this paper has determined 15 factors influencing the most on the success of IT projects through multiple regression analysis. The survey has disclosed that many CSFs were found related to IT projects but these 15 factors are also the backbone of IT projects. The re-search results obtained clearly indicated that the Leadership Qualities played a significant role in obtaining Top Management support in order to access to resources however, the Leadership Qualities did not play any role on the trained and capable Project Team Members. Besides, it is undoubtedly defined effective communication of the project was established to be influential on the conclusion and contributing factor towards the Success of IT projects in Pakistan. Top Man-agement Support as a whole was not found to play a key role in the IT Project Success.

  7. A Science Fair Companion. ERIC Digest.

    Science.gov (United States)

    McCann, Wendy Sherman

    This digest comments on various aspects of school science fairs. General expectations for science fair projects and participants are discussed, and tips for choosing a topic and completing a project are given. Organizational strategies for teachers charged with conducting science fairs are presented. Guidelines for parents in helping children with…

  8. Book fair

    CERN Multimedia

    2006-01-01

    The Swiss academic publishing house 'Presses Polytechniques Universitaires Romandes'will be presenting its most recent scientific and technical publications at a book fair in the lobby of the Main Building (60) from 10 a.m. to 4 p.m. on Thursday 28 September 2006.

  9. Toward Fairness

    Institute of Scientific and Technical Information of China (English)

    CHEN RAN

    2010-01-01

    @@ How can countries ensure a fair business environment in the flee trade area (FTA) between China and the Association of Southeast Asian Nations (ASEAN)? The question triggered wide discussion among partici-pants at a forum on the China-ASEAN Free Trade Area (CAFTA) held on January 7-8 in Nanning, capital of southwest China's Guangxi Zhuang Autonomous Region.

  10. Project Management Plan for the INEL technology logic diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, M.J.

    1992-10-01

    This Project Management Plan (PjMP) describes the elements of project planning and control that apply to activities outlined in Technical Task Plan (TTP) ID-121117, ``Technology Logic Diagrams For The INEL.`` The work on this project will be conducted by personnel in EG&G Idaho, Inc.`s Waste Technology Development Program. Technology logic diagrams represent a formal methodology to identify technology gaps or needs within Environmental Restoration/Waste Management Operations, which will focus on Office of Environmental Restoration and Waste Management (EM-50) research and development, demonstration, test, and evaluation efforts throughout the US Department of Energy complex. This PjMP describes the objectives, organization, roles and responsibilities, workscope and processes for implementing and managing the technology logic diagram for the Idaho National Engineering Laboratory project.

  11. Project Management Plan for the INEL technology logic diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, M.J.

    1992-10-01

    This Project Management Plan (PjMP) describes the elements of project planning and control that apply to activities outlined in Technical Task Plan (TTP) ID-121117, Technology Logic Diagrams For The INEL.'' The work on this project will be conducted by personnel in EG G Idaho, Inc.'s Waste Technology Development Program. Technology logic diagrams represent a formal methodology to identify technology gaps or needs within Environmental Restoration/Waste Management Operations, which will focus on Office of Environmental Restoration and Waste Management (EM-50) research and development, demonstration, test, and evaluation efforts throughout the US Department of Energy complex. This PjMP describes the objectives, organization, roles and responsibilities, workscope and processes for implementing and managing the technology logic diagram for the Idaho National Engineering Laboratory project.

  12. BMDO: New Mexico Technology Transfer Demonstration Project. Interim final report

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    The BMDO-New Mexico Technology Transfer Demonstration Project(BMDO-NM) was a collaborative effort among the national laboratories to identify and evaluate the commercial potential of selected SDI-funded technologies. The project was funded by BMDO (formerly known as the Strategic Defense Initiative Office or SDIO), the Technology Enterprise Division (NM-TED) of the NM Economic Development Division, and the three National Laboratories. The project was managed and supervised by SAGE Management Partners of Albuquerque, and project funding was administered through the University of New Mexico. The BMDO-NM Demonstration Project focused on the development of a process to assist technology developers in the evaluation of selected BMDO technology programs so that commercialization decisions can be made in an accelerated manner. The project brought together BMDO, the NM-TED, the University of New Mexico, and three New Mexico Federal laboratories -- Los Alamos (DOE), Phillips (DOD) and Sandia (DOE). Each national laboratory actively participated throughout the project through its technology transfer offices. New Mexico was selected as the site for the Demonstration Program because of its three national and federal research laboratories engaged in BMDO programs, and the existing relationship among state govemment, the labs, universities and local economic development and business assistance organizations. Subsequent Commercialization and Implementation phases for the selected technologies from LANL and SNL were completed by SAGE and the Project Team. Funding for those phases was provided by the individual labs as well as BMDO and NM-TED in kind services. NM-TED played a proactive role in this New Mexico partnership. Its mandate is to promote technology-based economic development, with a commitment to facilitate the use of technology by industry and business statewide. TED assumed the role of program manager and executing agent for BMDO in this demonstration project.

  13. China Fairs & Expos

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Food and Additives, Beverage, Drinks, Seasonings, Dairy Products Hong Kong International Tea Fair Date: August 12-August 15, 2011 Venue: Hong Kong Convention and Exhibition Center Exhibits: Tea, processing equipment and testing services, tea ware, tea bars/organizations, tea technology, tea service and publications.

  14. Current Renewable Energy Technologies and Future Projections

    Energy Technology Data Exchange (ETDEWEB)

    Allison, Stephen W [ORNL; Lapsa, Melissa Voss [ORNL; Ward, Christina D [ORNL; Smith, Barton [ORNL; Grubb, Kimberly R [ORNL; Lee, Russell [ORNL

    2007-05-01

    The generally acknowledged sources of renewable energy are wind, geothermal, biomass, solar, hydropower, and hydrogen. Renewable energy technologies are crucial to the production and utilization of energy from these regenerative and virtually inexhaustible sources. Furthermore, renewable energy technologies provide benefits beyond the establishment of sustainable energy resources. For example, these technologies produce negligible amounts of greenhouse gases and other pollutants in providing energy, and they exploit domestically available energy sources, thereby reducing our dependence on both the importation of fossil fuels and the use of nuclear fuels. The market price of renewable energy technologies does not reflect the economic value of these added benefits.

  15. In-Space Propulsion (346620) Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Technologies include, but are not limited to, electric and advanced chemical propulsion, propellantless propulsion such as aerocapture and solar sails, sample return...

  16. Cryogenic MEMS Technology for Sensing Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of cryogenic microwave components, such as focal plane polarization modulators, first requires an RF MEMS switching technology that operates...

  17. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    This paper describes a survey of technologies and to what extent they support virtual project based learning. The paper argues that a survey of learning technologies should be related to concrete learning tasks and processes. Problem oriented project pedagogy (POPP) is discussed, and a framework...... for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...... for e-learning. The paper concludes that virtual project based learning may benefit from facilities of all these systems....

  18. CNPC Appoints Chief Experts for Important Technological Projects

    Institute of Scientific and Technical Information of China (English)

    Zhao Jianzhong

    2006-01-01

    @@ On June 27th, China National Petroleum Corporation (CNPC) held a public recruitment to appoint chief experts in Beijing for its important technological projects, which is the first time for CNPC to appoint chief managers by the means of competitive recruitment. This recruitment covers four projects, such as drilling, logging, geophysical survey and ground engineering with 15 projects. Of those,there are 8 drilling projects, which make up 50 percent of all the important technological projects for public recruitment. CNPC expects to further boost the chief expert responsibility system and promote the research and development (R&D) of technological project on the basis of the public recruitment. The company completes the recruitment following the procedure of making announcement, conducting competitive recruitment and giving publicity. On July 25th, the appointment ceremony was held by CNPC and 15 experts were awarded the certificates. CNPC is entering a new stage for the implementation of the technology and talent strategy for the 11th Five-Year Plan. What's more, a new management mode is taking shape for the technological project and for the construction of technological personnel pool.

  19. Slot Coupled Patch Array Antenna Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed project is an antenna array whose beam is controlled digitally. The Phase 1 effort will assess the method needed to achieve the gain, bandwidth, and...

  20. Success in large high-technology projects: What really works?

    Science.gov (United States)

    Crosby, P.

    2014-08-01

    Despite a plethora of tools, technologies and management systems, successful execution of big science and engineering projects remains problematic. The sheer scale of globally funded projects such as the Large Hadron Collider and the Square Kilometre Array telescope means that lack of project success can impact both on national budgets, and collaborative reputations. In this paper, I explore data from contemporary literature alongside field research from several current high-technology projects in Europe and Australia, and reveal common `pressure points' that are shown to be key influencers of project control and success. I discuss the how mega-science projects sit between being merely complicated, and chaotic, and explain the importance of understanding multiple dimensions of project complexity. Project manager/leader traits are briefly discussed, including capability to govern and control such enterprises. Project structures are examined, including the challenge of collaborations. I show that early attention to building project resilience, curbing optimism, and risk alertness can help prepare large high-tech projects against threats, and why project managers need to understand aspects of `the silent power of time'. Mission assurance is advanced as a critical success function, alongside the deployment of task forces and new combinations of contingency plans. I argue for increased project control through industrial-style project reviews, and show how post-project reviews are an under-used, yet invaluable avenue of personal and organisational improvement. Lastly, I discuss the avoidance of project amnesia through effective capture of project knowledge, and transfer of lessons-learned to subsequent programs and projects.

  1. Manufacturing Methods and Technology Project Summary Reports

    Science.gov (United States)

    1982-06-01

    variation. The goal of this FY78 project was to solve these problems, develop pilot line production of 200 ferrites , and test them. SWITCHING ...WIRES FERRITE HIGH &. DIELECTRIC ^ mm i ii ’&Z2ZL f M Figure 1 - Non-Reciprocal Latching Phase Shifter - Side Loaded Geometry 39 i SUMMARY...Control Manufacturing Modernization Plan 18 ELECTRONICS Project 273 9638 - Integrated Hybrid Transistor Switch for Solid 21 State Converter

  2. Fair Pi

    OpenAIRE

    2006-01-01

    International audience; In this paper, we define fair computations in the pi-calculus. We follow Costa and Stirling's approach for CCS-like languages but exploit a more natural labeling method of process actions to filter out unfair process executions. The new labeling allows us to prove all the significant properties of the original one, such as unicity, persistence and disappearance of labels. It also turns out that the labeled pi-calculus is a conservative extension of the standard one. We...

  3. 75 FR 30197 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2010-05-28

    .... Classification Standards. d. Fair Labor Standards Act (FLSA). (1) Guidelines for FLSA Determinations. (2... as a Secretary, Level II. d. Fair Labor Standards Act (FLSA). Demonstration project positions will be... INFORMATION: Section 342(b) of the National Defense Authorization Act (NDAA) for Fiscal Year (FY) 1995, Public...

  4. Picosats for Autonomous Rendezvous and Docking Technology Demonstration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Over the next decade, a host of new technologies and capabilities will be needed by NASA to support Project Constellation. For risk reduction considerations, it is...

  5. Fabrication Technology for X-Ray Optics and Mandrels Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has a cross-project need for large format aspheric x-ray optics, which, demonstrate exceptionally low periodic surface errors. Available technologies to both...

  6. The Role of the Project Management Office on Information Technology Project Success

    Science.gov (United States)

    Stewart, Jacob S.

    2010-01-01

    The rate of failed and challenged Information Technology (IT) projects is too high according to the CHAOS Studies by the Standish Group and the literature on project management (Standish Group, 2008). The CHAOS Studies define project success as meeting the triple constraints of scope, time, and cost. Assessing critical success factors is another…

  7. The Role of the Project Management Office on Information Technology Project Success

    Science.gov (United States)

    Stewart, Jacob S.

    2010-01-01

    The rate of failed and challenged Information Technology (IT) projects is too high according to the CHAOS Studies by the Standish Group and the literature on project management (Standish Group, 2008). The CHAOS Studies define project success as meeting the triple constraints of scope, time, and cost. Assessing critical success factors is another…

  8. Human Robotic Systems (HRS): Rover Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In FY15, the HRS Rover Technologies will begin design of a prototype rover designed for the lunar surface, begin development of resource efficient navigation...

  9. Advanced Manufacturing Technologies (AMT): Manufacturing Initiative Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA supports the Advanced Manufacturing National Program Office (AMNPO). Hosted by the National Institute of Standards and Technology (NIST) the AMNPO is...

  10. Braided Composite Technologies for Rotorcraft Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed program will focus on the development of a new generation of advanced technology for rotorcraft transmission systems. This program will evaluate the...

  11. Braided Composite Technologies for Rotorcraft Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phase 2 effort will be used to advance the material and design technologies that were explored in the Phase 1 study of hybrid gears. In this hybrid approach, the...

  12. Extreme Environment Hybrid Gearbox Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Nearly all mechanism applications require some form of gearbox. Wet lubricated gearbox technologies are limited to the relatively narrow temperature ranges of their...

  13. Advanced Manufacturing Technologies (AMT): Advanced Near Net Shape Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and mature manufacturing technology to enable fabrication of single-piece integrally-stiffened launch vehicle structures to replace expensive, heavy, and...

  14. Numerical modeling in photonic crystals integrated technology: the COPERNICUS Project

    DEFF Research Database (Denmark)

    Malaguti, Stefania; Armaroli, Andrea; Bellanca, Gaetano

    2011-01-01

    Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project.......Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project....

  15. Essays on Technology Adoption and Provision Efficiency in Development Projects

    OpenAIRE

    2016-01-01

    In many development projects, technologies with potential to improve welfare are under adopted and under-utilized once adopted. One possible cause for this inefficiency is ignoring fit risk (the risk the technology may not meet the needs of the potential adopter). This dissertation attempts to introduce fit risk in the development context and develops a framework to analyze resource misallocation when fit risk is not addressed by project donors and managers. We examine strategies to reduce fi...

  16. Numerical modeling in photonic crystals integrated technology: the COPERNICUS Project

    DEFF Research Database (Denmark)

    Malaguti, Stefania; Armaroli, Andrea; Bellanca, Gaetano

    2011-01-01

    Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project.......Photonic crystals will play a fundamental role in the future of optical communications. The relevance of the numerical modeling for the success of this technology is assessed by using some examples concerning the experience of the COPERNICUS Project....

  17. Leadership Styles: Perceptions in Information Technology Project Teams

    Science.gov (United States)

    Fune, Roy P.

    2013-01-01

    The purpose of this study was to uncover Information Technology (IT) Project Managers' and IT Professionals' perceptions of effective leadership styles as they apply to project success. There have been prior studies dealing with the differences in perceptions between IT Functional Manager's leadership self-perception versus staff perceptions of…

  18. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  19. Leadership Styles: Perceptions in Information Technology Project Teams

    Science.gov (United States)

    Fune, Roy P.

    2013-01-01

    The purpose of this study was to uncover Information Technology (IT) Project Managers' and IT Professionals' perceptions of effective leadership styles as they apply to project success. There have been prior studies dealing with the differences in perceptions between IT Functional Manager's leadership self-perception versus staff perceptions of…

  20. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  1. Nuestra Tierra: A University/Public School Technology Integration Project.

    Science.gov (United States)

    Wiburg, Karin M.; Montoya, Nidelia; Sandin, John

    1999-01-01

    Describes a university/public school project to integrate technology with teaching and learning in a Southwest border school district. Discusses how the project was collaboratively designed, implemented, and evaluated by university faculty and school teachers and administrators. Findings demonstrated the potential of university researchers working…

  2. Leadership Styles: Perceptions in Information Technology Project Teams

    Science.gov (United States)

    Fune, Roy P.

    2013-01-01

    The purpose of this study was to uncover Information Technology (IT) Project Managers' and IT Professionals' perceptions of effective leadership styles as they apply to project success. There have been prior studies dealing with the differences in perceptions between IT Functional Manager's leadership self-perception versus staff…

  3. Manufacturing Methods and Technology Project Summary Reports

    Science.gov (United States)

    1982-12-01

    MORE INFORMATION 1 Additional information can be obtained from the project officer, Mr. Nathaniel Scott, ARRADCOM, AV 880-6945 or Commercial (201...QAM6, Mr. S. R. Caswell Cdr, Hawthorne AAP, Attn: SARHW-CO Cdr, Holston AAP, Attn: SARHO-CO Cdr, Indiana AAP, Attn: SARIN-CO AII-3 DRXIB-MT

  4. FAIR-share

    CERN Multimedia

    2009-01-01

    Twenty-seven engineers involved in the FAIR project in Germany recently spent three days at CERN. The purpose of their visit: tour ALICE and meet with CERN engineers. This marks the start of a close cooperation. The FAIR project engineers and their CERN counterparts.If you want to build a new particle accelerator and wish to benefit from existing expertise, who do you go to see? Well… why not go straight to CERN? That’s what this group of 27 engineers did. They are working on a new accelerator project, the Facility for Antiproton and Ion Research (FAIR), to be built at the heavy-ion research centre GSI located near Darmstadt, Germany. Representing a variety of disciplines, from manufacturing to architecture, they will be responsible for making the project a reality. The visit was organised from 14-16 October, making it possible to include a tour of the ALICE experiment prior to the re-start of the LHC. However, the main goal was ...

  5. Underwater communication. FOA-STU project 4: Maritime technology

    Science.gov (United States)

    Goetherstroem, L.; Kleman, B.; Lindquist, R.; Pentelius, T.

    1980-04-01

    Technological forecasts for underwater communication by acoustical, optical, or radio techniques are summarized. Results on transmission by the various means were evaluated under different hypotheses for the aqueous milieu. Technological possibilities, the need for underwater communications in assorted applications, and a practical assessment of the potential for realization are considered. Conclusions lead to a proposal for a series of development projects.

  6. Fuel Cell Technology Status Analysis Project: Partnership Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    2017-03-13

    Fact sheet describing the National Renewable Energy Laboratory's (NREL's) Fuel Cell Technology Status Analysis Project. NREL is seeking fuel cell industry partners from the United States and abroad to participate in an objective and credible analysis of commercially available fuel cell products to benchmark the current state of the technology and support industry growth.

  7. NASA Composite Cryotank Technology Project Game Changing Program

    Science.gov (United States)

    Fikes, John

    2015-01-01

    The fundamental goal of this project was to provide new and innovative cryotank technologies that enable human space exploration to destinations beyond low earth orbit such as the moon, near-earth asteroids, and Mars. The goal ... to mature technologies in preparation for potential system level flight demonstrations through significant ground-based testing and/or laboratory experimentation

  8. A Partnership Project: Integrating Computer Technology and Orff-Schulwerk.

    Science.gov (United States)

    Woody, Robert H.; Fredrickson, Julie M.

    2000-01-01

    Describes an alternative approach for general music educators wanting to study new instructional strategies in which a classroom teacher and university educator collaborated to explore the integration of computer technology with Orff-Schulwerk in second- and third-grade music classes. Discusses the project and two of its technology-assisted…

  9. Technology Transfer and Outreach for SNL/Rochester ALPHA Project.

    Energy Technology Data Exchange (ETDEWEB)

    Sinars, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-01-01

    This report describes the next stage goals and resource needs for the joint Sandia and University of Rochester ARPA-E project. A key portion of this project is Technology Transfer and Outreach, with the goal being to help ensure that this project develops a credible method or tool that the magneto-inertial fusion (MIF) research community can use to broaden the advocacy base, to pursue a viable path to commercial fusion energy, and to develop other commercial opportunities for the associated technology. This report describes an analysis of next stage goals and resource needs as requested by Milestone 5.1.1.

  10. Electrical Impedance Tomography Technology (EITT) Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J.

    2014-01-01

    Development of a portable, lightweight device providing two-dimensional tomographic imaging of the human body using impedance mapping. This technology can be developed to evaluate health risks and provide appropriate medical care on the ISS, during space travel and on the ground.

  11. Force Project Technology Presentation to the NRCC

    Science.gov (United States)

    2014-02-04

    cycle engineering for: – Fuel Handling & Quality Surveillance Equipment – Water Purification , Handling, & Quality Equipment – Combat Engineer...Material Handling Equipment – Military Bridging – Fuels and Lubricants – Army Petroleum Laboratory • Respond to Maneuver Support Center of...Systems & Latrines  A gray water reuse technology (TRL 6) that treats water from current CSS equipment to include Water Purification Systems & Shower

  12. Ceramic Technology Project semiannual progress report, October 1992--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-09-01

    This project was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Although progress has been made in developing reliable structural ceramics, further work is needed to reduce cost. The work described in this report is organized according to the following work breakdown structure project elements: Materials and processing (monolithics [Si nitride, carbide], ceramic composites, thermal and wear coatings, joining, cost effective ceramic machining), materials design methodology (contact interfaces, new concepts), data base and life prediction (structural qualification, time-dependent behavior, environmental effects, fracture mechanics, nondestructive evaluation development), and technology transfer.

  13. Minimal Technologies Application Project: Planning and installation

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S.D.; Hinchman, R.R.; Severinghaus, W.D.; Johnson, D.O.; Brent, J.J.

    1989-03-01

    Intensive and continuous tactical training during the last 35 years at the Hohenfels Training Area in West Germany has caused the loss of vegetative ground cover and has accelerated soil erosion rates, resulting in extensive environmental damage, safety hazards, and unrealistic training habitats. The objectives of this project are to develop and evaluate revegetation procedures for establishing adequate vegetative cover to control erosion at minimal costs and disruption to training activities. This project involved the development and installation of 12 revegetation procedures that combined four seedbed preparation methods and seeding options with three site-closure periods. In March 1987, the four seedbed preparation/seeding options and closure periods were selected, a study site design and location chosen, and specifications for the revegetation procedures developed. A German rehabilitation contractor attempted the specified seedbed preparation and seeding on the 13.5-ha site in June, but abnormally high rainfall, usually wet site conditions, and lack of adequate equipment prevented the contractor from completing six of the 12 planned procedures. Planning and execution of the project has nonetheless provided valuable information on the importance and use of soil analytical results, seed availability and cost data, contractor equipment requirements, and time required for planning future revegetation efforts. Continued monitoring of vegetative ground cover at the site for the next two years, combined with cost information, will provide necessary data to determine which of the six revegetation procedures is the most effective. These data will be used in planning future rehabilitation efforts on tactical training areas.

  14. Korea-China Optical Technology Research Centre Project

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Jung; Rhee, Y. J.; Jung, D. Y. and others

    2004-06-15

    The main objectives of this project are to establish the international collaboration basis of optical technologies between Korea and China. The combination of the Chinese advanced fundamental technologies with the Korean industrialization and commercialization infrastructures is realized, by ways of exchanging scientists and informations, holding joint seminars, cooperative utilization of research resources. On the ground of this establishment, the optical technologies of Korea are supposed to be leveled up to those of the world-most advanced. At the same time, for the improvement of mutual benefit and financial profit of both countries, providing technical advice and suggestions to the optical industries in the two countries is an another goal of this project. The state-of-the-arts of the Chinese technologies such as aerospace engineering, military defence technology, medical technology, laser fusion research, and so on, are known to be far above those of Korean and up to one of the most advanced in the world. Thus it is thought to be necessary that the acquisition of these technologies, implementation of joint research projects for technology development as well as the balanced opportunities for commercial product/sales and cooperation should be actively pursued in order to enhance the levels of Korean technologies in these fields.

  15. SUCCESS CONCEPT ANALYSIS APPLIED TO THE INFORMATION TECHNOLOGY PROJECT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Cassio C. Montenegro Duarte

    2012-05-01

    Full Text Available This study evaluates the concept of success in project management that is applicable to the IT universe, from the classical theory associated with the techniques of project management. Therefore, it applies the theoretical analysis associated to the context of information technology in enterprises as well as the classic literature of traditional project management, focusing on its application in business information technology. From the literature developed in the first part of the study, four propositions were prepared for study which formed the basis for the development of the field research with three large companies that develop projects of Information Technology. The methodology used in the study predicted the development of the multiple case study. Empirical evidence suggests that the concept of success found in the classical literature in project management adjusts to the environment management of IT projects. Showed that it is possible to create the model of standard IT projects in order to replicate it in future derivatives projects, which depends on the learning acquired at the end of a long and continuous process and sponsorship of senior management, which ultimately results in its merger into the company culture.

  16. Keynote presentation: Project Management, Technology and Evolving Work Processes

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth

    Bridging the classroom and workplace is a challenge in the Project Management classroom because students rarely have the opportunity or the experience needed to head up large projects. So how can instructors present the opportunity to develop skills and gain experience needed to understand project...... management in a classroom setting? To begin to answer this question, the presentation describes three key strategies used in a Project Management course developed from a communications perspective in the International Bachelor Program in Marketing and Management Communication, Business & Social Sciences...... Management regardless of the technology used to support it....

  17. Didactics, Technology, and Organisation of Project Based Distance Education

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack; Borch, Ole M.; Helbo, Jan

    2005-01-01

    The didactics, technology, and organization of an ICT supported distance engineering Master education are described. A systematic monitoring and evaluation of the basis year has given useful experience, subsequently used for adjustments and improvements. A successful on-campus project organized...... learning method applied at Aalborg University has been transferred to the off-campus situation. Experience show that didactic adjustments are required, in particular for obtaining an optimal balance between course and project work. Project collaboration in groups requires communication, synchronous as well......, was constructed. This system, called Uniflex, handles project work, courses, and exchange of information between the administrative coordinator, students and teachers....

  18. NASA Fixed Wing Project: Green Technologies for Future Aircraft Generation

    Science.gov (United States)

    DelRosario, Ruben

    2014-01-01

    The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advances in multidisciplinary technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. The presentation will highlight the FW Project vision of revolutionary systems and technologies needed to achieve the challenging goals of aviation. Specifically, the primary focus of the FW Project is on the N+3 generation that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe.

  19. Disruption of Information Technology Projects: The Reactive Decoupling of Project Management Methodologies

    Science.gov (United States)

    Schmitz, Kurt W.

    2013-01-01

    Information Technology projects have migrated toward two dominant Project Management (PM) methodologies. Plan-driven practices provide organizational control through highly structured plans, schedules, and specifications that facilitate oversight by hierarchical bureaucracies. In contrast, agile practices emphasize empowered teams using flexible…

  20. Disruption of Information Technology Projects: The Reactive Decoupling of Project Management Methodologies

    Science.gov (United States)

    Schmitz, Kurt W.

    2013-01-01

    Information Technology projects have migrated toward two dominant Project Management (PM) methodologies. Plan-driven practices provide organizational control through highly structured plans, schedules, and specifications that facilitate oversight by hierarchical bureaucracies. In contrast, agile practices emphasize empowered teams using flexible…

  1. Energy+ pumps - Technology procurement for very energy efficient circulation pumps, first results of the current IEE-project

    Energy Technology Data Exchange (ETDEWEB)

    Barthel, Claus; Thomas, Stefan [Wuppertal Inst. for Climate, Environment, Energy (Germany); Benke, Georg; Schaeppi, Bernd [Austrian Energy Agency A.E.A (Austria); Forfori, Fabio [Politecnico di Milano, Dept. di Energetica (Italy); Guisson, Ruben [Flemisch Inst. for technological research (Vito) (Belgium); Papamikrouli, Louiza [Centre for Renewable Energy Sources (CRES) (Greece); Puente, Margarita [ESCAN, S.A. (Spain); Spirek, Tomas [SEVEn, Stredisko pro efektivni vyuzivani energie, o.p.s. (Czech Republic); Rautiainen, Kimmo [Motiva Oy (Finland); Koehl, Joerg [Deutsche Energie-Agentur GmbH (Germany); Anglade, Alain [ADEME (France); Nipkow, Juerg [ARENA (Switzerland)

    2007-07-01

    About 2 % of the overall electricity consumption of the EU is caused by circulators in single or double family homes and flats. A new technology of pumps with electronically commutated (EC) motor pumps is available now; it is one possible way to achieve a reduction in circulator annual electricity use by 60 % or more.The project's objective is a market transformation towards this new very energy-efficient pump technologies - Energy+ pumps - for circulators in heating systems, both stand alone and integrated in boilers. Only few manufacturers have so far introduced the new pump technology to the market for single or double family homes and flats.To bring more products to the market from all major manufacturers, the project will adapt and apply the technology procurement methodology as it was very successfully tested in the European Energy+ project on energy-efficient cold appliances [5] [6]. Large buyers will be aggregated, to activate the pump and boiler manufacturers. Sales and training materials and a sizing spreadsheet software for installation contractors will be developed and applied. A competition both for energy-efficient products and marketing campaigns will be organised and the information on the Energy+ pumps will be disseminated widely through website, newsletter, media, and fairs.This paper gives a short overview of this project and presents the results of the first project phases: a European wide market study on circulators and heating systems, and the first Energy+ lists for circulators, buyers and supporters.

  2. Fair Play

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    China reassures foreign companies they are still welcome to invest in government-funded projects Nine Chinese ministries,including the National Development and Reform Commission (NDRC),jointly issued a notice on June

  3. Influence of Strategic Management Project Portfolio in Technological Development

    OpenAIRE

    Bitencourt, Lorene Carvalho; Garcez, Marcos Paixão

    2013-01-01

    This text aims to present a case of a multinational company that acts in construction and furniture markets. For three years ago the company had implemented an area of portfolio project management with objective of using strategic criteria to select project that contributes with technologic development of the company. The methodology of this study was grounded in Castro and Carvalho theoretical reference for analyze the implementation process and the tools used by portfolio management. The re...

  4. REGULATORY FUNDAMENTALS FOR IMPLEMENTATION OF INFORMATION TECHNOLOGY PROJECTS IN INDUSTRY

    Directory of Open Access Journals (Sweden)

    L. V. Gubich

    2016-01-01

    Full Text Available The article provides an overview of the existing regulatory basis for the development of IIST. The features of IT projects management and a brief description of methodological recommendations on implementation of IT projects of the State scientific and technical Program «Electronic enterprise resource planning (CALS-ERP-technology» for 2011–2015 are considered.

  5. Ceramic Technology Project. Semiannual progress report, April 1991--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  6. Collaborative Project-Based Learning: An Integrative Science and Technological Education Project

    Science.gov (United States)

    Baser, Derya; Ozden, M. Yasar; Karaarslan, Hasan

    2017-01-01

    Background: Blending collaborative learning and project-based learning (PBL) based on Wolff (2003) design categories, students interacted in a learning environment where they developed their technology integration practices as well as their technological and collaborative skills. Purpose: The study aims to understand how seventh grade students…

  7. Application of Technology in Project-Based Distance Learning

    Directory of Open Access Journals (Sweden)

    Ali Mehrabian

    2008-06-01

    Full Text Available Present technology and the accessibility of internet have made distance learning easier, more efficient, and more convenient for students. This technology allows instructors and students to communicate asynchronously, at times and locations of their own choosing, by exchanging printed or electronic information. The use of project-based approach is being recognized in the literature as a potential component of courses in the faculties of engineering, science, and technology. Instructors may have to restructure their course differently to accommodate and facilitate the effectiveness of distance learning. A project-based engineering course, traditionally taught in a classroom settings using live mode at the College of Engineering and Computer Sciences at the University of Central Florida (UCF has been transformed to a distance course taught using distance modes. In this case, pedagogical transitions and adjustments are required, in particular for obtaining an optimal balance between the course material and the project work. Project collaboration in groups requires communication, which is possible with extensive utilization of new information and communication technology, such as virtual meetings. This paper discusses the course transition from live to distance modes and touches on some issues as they relate to the effectiveness of this methodology and the lessons learned from its application within different context. More specifically, this discussion includes the benefit of implementing project-based work in the domain of the distance learning courses.

  8. Didactics, Technology, and Organisation of Project Based Distance Education

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack; Borch, Ole M.; Helbo, Jan

    2005-01-01

    learning method applied at Aalborg University has been transferred to the off-campus situation. Experience show that didactic adjustments are required, in particular for obtaining an optimal balance between course and project work. Project collaboration in groups requires communication, synchronous as well...... as asynchronous, which is possible with extensive utilization of new information and communication technology. Virtual meetings are conducted with text, sound and video based communication. Also the organization requires technology. A new learning management system, specifically designed to the didactic form...

  9. Job Diagnostic Survey: A Team Project Information Technology Perspective

    Directory of Open Access Journals (Sweden)

    Renato Telles

    2016-10-01

    Full Text Available This work aims to understand the effects of management styles on the work motivation of a team project in the telecommunications information technology context. To understand this complex behavior, we use the Job Diagnostic Survey methodology. In this critical analysis, we identify the main factors for failure in the field of telecommunications. The managers need to implement a methodology and define processes and formal procedures that need to be applied during the development of projects to mitigate the risk of failure and maintain control over it. One of the main findings in this research is associated with challenges and motivation by the Information Technology (IT professionals.

  10. Advanced Turbine Technology Applications Project (ATTAP) and Hybrid Vehicle Turbine Engine Technology Support project (HVTE-TS): Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This final technical report was prepared by Rolls-Royce Allison summarizing the multiyear activities of the Advanced Turbine Technology Applications Project (ATTAP) and the Hybrid Vehicle Turbine Engine Technology Support (HVTE-TS) project. The ATTAP program was initiated in October 1987 and continued through 1993 under sponsorship of the US Department of Energy (DOE), Energy Conservation and Renewable Energy, Office of Transportation Technologies, Propulsion Systems, Advanced Propulsion Division. ATTAP was intended to advance the technological readiness of the automotive ceramic gas turbine engine. The target application was the prime power unit coupled to conventional transmissions and powertrains. During the early 1990s, hybrid electric powered automotive propulsion systems became the focus of development and demonstration efforts by the US auto industry and the Department of energy. Thus in 1994, the original ATTAP technology focus was redirected to meet the needs of advanced gas turbine electric generator sets. As a result, the program was restructured to provide the required hybrid vehicle turbine engine technology support and the project renamed HVTE-TS. The overall objective of the combined ATTAP and HVTE-TS projects was to develop and demonstrate structural ceramic components that have the potential for competitive automotive engine life cycle cost and for operating 3,500 hr in an advanced high temperature turbine engine environment. This report describes materials characterization and ceramic component development, ceramic components, hot gasifier rig testing, test-bed engine testing, combustion development, insulation development, and regenerator system development. 130 figs., 12 tabs.

  11. Pipeline cost reduction through effective project management and applied technology

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, A. [TransCanada Pipeline Ltd., Alberta (Canada); Babuk, T. [Empress International Inc., Westwood, NJ (United States); Mohitpour, M. [Tempsys Pipeline Solutions Inc., Vancouver, BC (Canada); Murray, M.A. [National Energy Board of Canada (Canada)

    2005-07-01

    Pipelines are regarded by many as passive structures with the technology involved in their construction and operation being viewed as relatively simple and stable. If such is the case how can there be much room for cost improvement? In reality, there have been many technological and regulatory innovations required within the pipeline industry to meet the challenges posed by ever increasing consumer demand for hydrocarbons, the effects of aging infrastructure and a need to control operating and maintenance expenditures. The importance of technology management, as a subset of overall project management, is a key element of life cycle cost control. Assurance of public safety and the integrity of the system are other key elements in ensuring a successful pipeline project. The essentials of best practise project management from an owner/ operator's perspective are set out in the paper. Particular attention is paid to the appropriate introduction of new technology, strategic procurement practice and material selection, indicating that capital cost savings of up to 15% are achievable without harming life cycle cost. The value of partnering leading to technical innovation, cost savings and improved profitability for all the participants is described. Partnering also helps avoid duplicated effort through the use of common tools for design, planning schedule tracking and reporting. Investing in appropriate technology development has been a major source of cost reduction in recent years and the impact of a number of these recently introduced technologies in the areas of materials, construction processes and operation and maintenance are discussed in the paper. (author)

  12. Space technology and robotics in school projects

    Science.gov (United States)

    Villias, Georgios

    2016-04-01

    Space-related educational activities is a very inspiring and attractive way to involve students into science courses, present them the variety of STEM careers that they can follow, while giving them at the same time the opportunity to develop various practical and communication skills necessary for their future professional development. As part of a large scale extracurricular course in Space Science, Space Technology and Robotics that has been introduced in our school, our students, divided in smaller groups of 3-4 students in each, try to understand the challenges that current and future space exploration is facing. Following a mixture of an inquiry-based learning methodology and hands-on practical activities related with constructions and experiments, students get a glimpse of the pre-mentioned fields. Our main goal is to gain practical knowledge and inspiration from the exciting field of Space, to attain an adequate level of team spirit and effective cooperation, while developing technical and research data-mining skills. We use the following two approaches: 1. Constructive (Technical) approach Designing and constructing various customized robotic machines, that will simulate the future space exploration vehicles and satellites needed to study the atmosphere, surface and subsurface of planets, moons or other planetary bodies of our solar system that have shown some promising indications for the existence of life, taking seriously into account their special characteristics and known existing conditions (like Mars, Titan, Europa & Enceladus). The STEM tools we use are the following: - LEGO Mindstorms: to construct rovers for surface exploration. - Hydrobots: an MIT's SeaPerch program for the construction of submarine semi-autonomous robots. - CanSats: Arduino-based microsatellites able to receive, record & transmit data. - Space balloons: appropriate for high altitude atmospheric measurements & photography. 2. Scientific approach Conducting interesting physics

  13. Atoms at the Science Fair

    Energy Technology Data Exchange (ETDEWEB)

    LeCompte, Robert G. [AEC Division of Technical Information; Wood, Burrell L. [AEC Division of Special Projects

    1968-01-01

    The United States Atomic Energy Commission has prepared this booklet to help young science fair exhibitors, their science teachers, project counselors, and parents. The booklet suggests some of the numerous nuclear topics on which students can base meaningful science projects. It offers all exhibitors advice on how to plan, design, and construct successful exhibits.

  14. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  15. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  16. Ubiquitous Learning Project Using Life-Logging Technology in Japan

    Science.gov (United States)

    Ogata, Hiroaki; Hou, Bin; Li, Mengmeng; Uosaki, Noriko; Mouri, Kosuke; Liu, Songran

    2014-01-01

    A Ubiquitous Learning Log (ULL) is defined as a digital record of what a learner has learned in daily life using ubiquitous computing technologies. In this paper, a project which developed a system called SCROLL (System for Capturing and Reusing Of Learning Log) is presented. The aim of developing SCROLL is to help learners record, organize,…

  17. OCTAVIUS: a FP7 project demonstrating CO2 capture technologies

    NARCIS (Netherlands)

    Broutin, P.; Kvamsdal, H.M.; La Marca, C.; Os, P.J. van; Robinson, L.

    2014-01-01

    The OCTAVIUS project (Optimisation of CO2 Capture Technology Allowing Verification and Implementation at Utility Scale) has started on March 1st 2012 for a period of 5 years, as part of the 7th Framework Programme of the European Commission. Gathering 15 European and 2 South African partners,

  18. Proceedings of the Nuclear Criticality Technology and Safety Project Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.G. [comp.

    1994-01-01

    This report is the proceedings of the annual Nuclear Criticality Technology and Safety Project (NCTSP) Workshop held in Monterey, California, on April 16--28, 1993. The NCTSP was sponsored by the Department of Energy and organized by the Los Alamos Critical Experiments Facility. The report is divided into six sections reflecting the sessions outlined on the workshop agenda.

  19. OCTAVIUS: a FP7 project demonstrating CO2 capture technologies

    NARCIS (Netherlands)

    Broutin, P.; Kvamsdal, H.M.; La Marca, C.; Os, P.J. van; Robinson, L.

    2014-01-01

    The OCTAVIUS project (Optimisation of CO2 Capture Technology Allowing Verification and Implementation at Utility Scale) has started on March 1st 2012 for a period of 5 years, as part of the 7th Framework Programme of the European Commission. Gathering 15 European and 2 South African partners, OCTAVI

  20. Ubiquitous Learning Project Using Life-Logging Technology in Japan

    Science.gov (United States)

    Ogata, Hiroaki; Hou, Bin; Li, Mengmeng; Uosaki, Noriko; Mouri, Kosuke; Liu, Songran

    2014-01-01

    A Ubiquitous Learning Log (ULL) is defined as a digital record of what a learner has learned in daily life using ubiquitous computing technologies. In this paper, a project which developed a system called SCROLL (System for Capturing and Reusing Of Learning Log) is presented. The aim of developing SCROLL is to help learners record, organize,…

  1. Ceramic Technology Project database: March 1990 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-07-01

    This report is the fifth in a series of semiannual data summary reports on information being stored in the Ceramic Technology Project (CTP) database. The overall system status as of March 31, 1990, is summarized, and the latest additions of ceramic mechanical properties data are given for zirconia, silicon carbide, and silicon nitride ceramic mechanical properties data, including some properties on brazed specimens.

  2. Expert system for economic evaluation of technological projects

    Directory of Open Access Journals (Sweden)

    Bohumil Hlavenka

    2001-01-01

    Full Text Available Apart from the technical level, a basic tool for decision-making and realization of the technical innovation project is also its economic effectiveness. It is assessed by comparing expenses and effects with respect to all-society interests and standards valid in a relevant period for the areas of technology, economy, ecology, safety of work, etc.

  3. Developing Instructional Technology Products Using Effective Project Management Practices

    Science.gov (United States)

    Allen, Stephanie; Hardin, Paul C.

    2008-01-01

    Delivering a successful instructional technology (IT) product depends on more than just having an extremely creative instructional solution or following an instructional systems design (ISD) model. Proper planning, direction, and execution of the project are require, as well. We present a model of management that encompasses the ISD process. Five…

  4. Project to demonstrate key technologies for native medicines

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Aresearch project on the demonstration of key technologies for developing medicines and pharmacy of Chinese minorities will soon be started at the CAS Northwest Institute of Plateau Biology (NWIPB). From 3 to 5 November, 2008, a forum to appraise its implementation approaches was held in Xining, capital of northwest China's Qinghai Province.

  5. Materials Development Program: Ceramic Technology Project bibliography, 1984--1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The Ceramic Technology [for Advanced Heat Engines] Project was begun in 1983 to meet the ceramic materials needs of the companion DOE automotive engine program, the Advanced Gas Turbine (AGT) project, and the Heavy Duty Transport (low-heat-rejection, heavy-duty diesel) project. Goal is to develop an industry technology base for reliable and cost effective ceramics for applications in advanced automotive gas turbine and diesel engines. Research areas were identified following extensive input from industry and academia. Majority of research is done by industry (60%); work is also done at colleges and universities, in-house, and at other national laboratories and government agencies. In the beginning, reliability of ceramic components was the key issue. The reliability issues have largely been met and, at the present time, cost is the driving issue, especially in light of the highly cost-sensitive automotive market. Emphasis of the program has now been shifted toward developing cost-effective ceramic components for high-performance engines in the near-term. This bibliography is a compilation of publications done in conjunction with the Ceramic Technology Project since its beginning. Citations were obtained from reports done by participants in the project. We have tried to limit citations to those published and easily located. The end date of 1992 was selected.

  6. Learning to make technology work - a study of learning in technology demonstration projects

    DEFF Research Database (Denmark)

    Sutherland Olsen, Dorothy; Andersen, Per Dannemand

    2014-01-01

    Building working demonstrations of new technologies within sustainable energy and transport has become an important activity in the move towards a more energy efficient society. The work involved in building these demonstrations is usually organised in a project with a variety of different...... participants, including users. The aim of the project is usually to test the technology and promote changes in users habits, while learning is frequently cited as the main outcome. In this paper we review existing studies of demonstration projects and try to gain an overview of the main aims and effects...

  7. Biomedical Monitoring By A Novel Noncontact Radio Frequency Technology Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J. (Compiler)

    2014-01-01

    The area of Space Health and Medicine is one of the NASA's Space Technology Grand Challenges. Space is an extreme environment which is not conducive to human life. The extraterrestrial environment can result in the deconditioning of various human physiological systems and thus require easy to use physiological monitoring technologies in order to better monitor space crews for appropriate health management and successful space missions and space operations. Furthermore, the Space Technology Roadmap's Technology Area Breakdown Structure calls for improvements in research to support human health and performance (Technology Area 06). To address these needs, this project investigated a potential noncontact and noninvasive radio frequency-based technique of monitoring central hemodynamic function in human research subjects in response to orthostatic stress.

  8. Demonstration Project 111, ITS/CVO Technology Truck, Final Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Gambrell, KP

    2002-01-11

    In 1995, the planning and building processes began to design and develop a mobile demonstration unit that could travel across the nation and be used as an effective outreach tool. In 1997, the unit was completed; and from June 1997 until December 2000, the Federal Highway Administration (FHWA)/Federal Motor Carrier Safety Administration (FMCSA) mobilized the Technology Truck, also known as Demonstration Project No. 111, ''Advanced Motor Carrier Operations and Safety Technologies.'' The project featured the latest available state-of-the-practice intelligent transportation systems (ITS) technologies designed to improve both the efficiency and safety of commercial vehicle operations (CVO). The Technology Truck was designed to inform and educate the motor carrier community and other stakeholders regarding ITS technologies, thus gaining support and buy-in for participation in the ITS program. The primary objective of the project was to demonstrate new and emerging ITS/CVO technologies and programs, showing their impact on motor carrier safety and productivity. In order to meet the objectives of the Technology Truck project, the FHWA/FMCSA formed public/private partnerships with industry and with Oak Ridge National Laboratory to demonstrate and display available ITS/CVO technologies in a cooperative effort. The mobile demonstration unit was showcased at national and regional conferences, symposiums, universities, truck shows and other venues, in an effort to reach as many potential users and decision makers as possible. By the end of the touring phase, the ITS/CVO Technology Truck had been demonstrated in 38 states, 4 Canadian provinces, 88 cities, and 114 events; been toured by 18,099 people; and traveled 115,233 miles. The market penetration for the Technology Truck exceeded 4,000,000, and the website received more than 25,000 hits. In addition to the Truck's visits, the portable ITS/CVO kiosk was demonstrated at 31 events in 23 cites in 15

  9. Ceramic Technology Project semiannual progress report, April 1992--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1993-07-01

    This project was developed to meet the ceramic technology requirements of the DOE Office of Transportation Systems` automotive technology programs. Significant progress in fabricating ceramic components for DOE, NASA, and DOE advanced heat engine programs show that operation of ceramic parts in high-temperature engines is feasible; however, addition research is needed in materials and processing, design, and data base and life prediction before industry will have a sufficient technology base for producing reliable cost-effective ceramic engine components commercially. A 5-yr project plan was developed, with focus on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

  10. Risk management in methodologies of information technology and communications projects

    Directory of Open Access Journals (Sweden)

    Jonathan Carrillo

    2013-12-01

    Full Text Available (Received: 2013/10/02 - Accepted: 2013/12/13At present there are methodologies that have several alternatives and methods to manage projects of Information and Communication Technologies. However, these do not cover a solution for the technology events that can occur in the industry, government, education, among others. In the technology market there are several models to identify and analyze risks according to relevant aspects of their area of specialty e.g. projects, in software development, communications, information security and business alignment. For this reason, this research conducted an evaluation of risk management activities of the methodologies used mostly to know which of them includes more correspondence with basic elements of IT using a rating scale.

  11. Project Morpheus: Lessons Learned in Lander Technology Development

    Science.gov (United States)

    Olansen, Jon B.; Munday, Stephen R.; Mitchell, Jennifer D.

    2013-01-01

    NASA's Morpheus Project has developed and tested a prototype planetary lander capable of vertical takeoff and landing, that is designed to serve as a testbed for advanced spacecraft technologies. The lander vehicle, propelled by a LOX/Methane engine and sized to carry a 500kg payload to the lunar surface, provides a platform for bringing technologies from the laboratory into an integrated flight system at relatively low cost. Designed, developed, manufactured and operated in-house by engineers at Johnson Space Center, the initial flight test campaign began on-site at JSC less than one year after project start. After two years of testing, including two major upgrade periods, and recovery from a test crash that caused the loss of a vehicle, flight testing will evolve to executing autonomous flights simulating a 500m lunar approach trajectory, hazard avoidance maneuvers, and precision landing, incorporating the Autonomous Landing and Hazard Avoidance (ALHAT) sensor suite. These free-flights are conducted at a simulated planetary landscape built at Kennedy Space Center's Shuttle Landing Facility. The Morpheus Project represents a departure from recent NASA programs and projects that traditionally require longer development lifecycles and testing at remote, dedicated testing facilities. This paper expands on the project perspective that technologies offer promise, but capabilities offer solutions. It documents the integrated testing campaign, the infrastructure and testing facilities, and the technologies being evaluated in this testbed. The paper also describes the fast pace of the project, rapid prototyping, frequent testing, and lessons learned during this departure from the traditional engineering development process at NASA's Johnson Space Center.

  12. Fair Preorder for Partial Fair Kripke Structures

    Institute of Scientific and Technical Information of China (English)

    徐蔚文; 陆鑫达

    2003-01-01

    This paper discussed how to handle the fairness conditions in partial Kripke structures. The partial Krip-ke structures were used for partial state spaces model checking, which is a new technique to solve problems of stateexplosion. This paper extended the partial Kripke structure with fairness conditions by defining a partial fair Krip-ke structure, and a 3-valued fair CTL(Computation-Tree Logic) semantics correspondingly. It defines a fair pre-order between partial Kripke structures that preserves fairness and is akin to fair bisimulation. In addition, a perti-nent theorem is also given, which indicates the relationship between the partial state spaces and the more completeone by illustrating the characterizations of states in the partial fair structure in terms of CTL formulae.

  13. A Quantitative Study into the Information Technology Project Portfolio Practice: The Impact on Information Technology Project Deliverables

    Science.gov (United States)

    Yu, Wei

    2013-01-01

    This dissertation applied the quantitative approach to the data gathered from online survey questionnaires regarding the three objects: Information Technology (IT) Portfolio Management, IT-Business Alignment, and IT Project Deliverables. By studying this data, this dissertation uncovered the underlying relationships that exist between the…

  14. A Quantitative Study into the Information Technology Project Portfolio Practice: The Impact on Information Technology Project Deliverables

    Science.gov (United States)

    Yu, Wei

    2013-01-01

    This dissertation applied the quantitative approach to the data gathered from online survey questionnaires regarding the three objects: Information Technology (IT) Portfolio Management, IT-Business Alignment, and IT Project Deliverables. By studying this data, this dissertation uncovered the underlying relationships that exist between the…

  15. Fair use versus fair return: copyright legislation and its consequences.

    Science.gov (United States)

    Horowitz, I L; Curtis, M E

    1984-03-01

    The purpose of this article is to examine the ramifications of legislative recognition of the concept of fair use in the Copyright Act of 1976. The fair use concept, while of small consequence in its normative origins, has turned out to be the foundation of the most perplexing and divisive issues in the new legislative guidelines governing copyright. Legislative recognition of the concept of fair use, coupled with enormous growth of a new technology--extending from xerography to on-line database systems--creates de facto exemptions to both the intent and content of new copyright guidelines. The issue is not one of limiting use or suppressing information, but of mechanisms for safeguarding the rights of copyright holders, be they authors or publishers, and insuring the free flow of information by providing a proper return on both intellectual creativity and capital expenditures. The authors argue that the elimination, or at least curtailment of fair use doctrine, coupled with an increase in technological approaches to reporting of secondary use of copyrighted material, will benefit all sections of the knowledge industry. Authors will receive proper royalties on use; publishers will be able to sell more books and journals at lower prices; and librarians will be liberated from extensive chores such as monitoring usage or determining fee schedules and transferences. The issue is one of fair return--an issue obscured and ultimately subverted by fair use.

  16. Four Tools for Science Fair Success

    Science.gov (United States)

    Smith, Sherry Weaver; Messmer, Barbara; Storm, Bill; Weaver, Cheryl

    2007-01-01

    These teacher-tested ideas will guide students in creating true inquiry-based projects. Two of the ideas, the Topic Selection Wizard and Science Project Timeline, are appropriate for all science fair programs, even new ones. For existing programs, the Black Box of Project Improvement and After-School Project Clinic improve project quality and…

  17. Communication in high technology product development projects:project personnel’s viewpoint for improvement

    OpenAIRE

    Väänänen, M. (Mirja)

    2010-01-01

    Abstract Product development plays a crucial role in the survival of high technology companies. High technology product development projects typically are multi-technical, multicultural, geographically dispersed, inter-connected and organized in a network of companies. These settings pose extra challenges for communication. In this qualitative multiple-case study, communication challenges and possible solutions for developing communication were studied. The empirical data were collect...

  18. Technology for construction of formwork for fair- faced concrete for open tunnel in east artificial island of Hongkong- Zhuhai- Macao Bridge%港珠澳大桥东人工岛敞开段清水混凝土模板施工技术

    Institute of Scientific and Technical Information of China (English)

    张奎; 吴海章; 陈传正

    2016-01-01

    Formwork is very important for construction of fair-faced concrete and its quality is the key to a project. The method for assembling fair-faced concrete formwork is introduced and the technology for construction of formwork for fair-faced concrete is described on the basis of the engineering practice in the construction of fair-faced concrete for the open tunnel walls in the east artificial island of Hongkong-Zhuhai-Macao Bridge.%清水混凝土施工中,模板处于重要地位,其质量是工程的关键。结合港珠澳大桥岛隧工程东人工岛隧道敞开段墙身清水混凝土施工实际,介绍了清水混凝土模板的拼装方法,阐述了清水混凝土模板施工技术。

  19. The Hyperion Project: Partnership for an Advaned Technology Cluster Testbed

    Energy Technology Data Exchange (ETDEWEB)

    Seager, M; Leininger, M

    2008-04-28

    The Hyperion project offers a unique opportunity to participate in a community-driven testing and development resource at a scale beyond what can be accomplished by one entity alone. Hyperion is a new strategic technology partnership intended to support the member-driven development and testing at scale. This partnership will allow commodity clusters to scale up to meet the growing demands of customers multi-core petascale simulation environments. Hyperion will tightly couple together the outstanding research and development capabilities of Lawrence Livermore National Laboratory with leading technology companies, including Cisco, Data Direct Networks, Dell, Intel, LSI, Mellanox, Qlogic, RedHat, SuperMicro and Sun. The end goal of this project is to revolutionize cluster computing in fundamental ways by providing the critical software and hardware components for a highly scalable simulation environment. This environment will include support for high performance networking, parallel file systems, operating system, and cluster management. This goal will be achieved by building a scalable technology cluster testbed that will be fully dedicated to the partners and provide: (1) A scalable development testing and benchmarking environment for critical enabling Linux cluster technologies; (2) An evaluation testbed for new hardware and software technologies; and (3) A vehicle for forming long term collaborations.

  20. Scene projection technology development for imaging sensor testing at AEDC

    Science.gov (United States)

    Lowry, H.; Fedde, M.; Crider, D.; Horne, H.; Bynum, K.; Steely, S.; Labello, J.

    2012-06-01

    Arnold Engineering Development Center (AEDC) is tasked with visible-to-LWIR imaging sensor calibration and characterization, as well as hardware-in-the-loop (HWIL) testing with high-fidelity complex scene projection to validate sensor mission performance. They are thus involved in the development of technologies and methodologies that are used in space simulation chambers for such testing. These activities support a variety of program needs such as space situational awareness (SSA). This paper provides an overview of pertinent technologies being investigated and implemented at AEDC.

  1. Technology Applications Group Multimedia CD-ROM Project

    Science.gov (United States)

    McRacken, Kristi D.

    1995-01-01

    To produce a multimedia CD-ROM for the Technology Applications Group which would present the Technology Opportunity Showcase (TOPS) exhibits and Small Business Innovative Research (SBIR) projects to interested companies. The CD-ROM format is being used and developed especially for those companies who do not have Internet access, and cannot directly visit Langley through the World Wide Web. The CD-ROM will include text, pictures, sound, and movies. The information for the CD-ROM will be stored in a database from which the users can query and browse the information, and future CD's can be maintained and updated.

  2. Gas-turbine critical research and advanced technology support project

    Science.gov (United States)

    Clark, J. S.; Lowell, C. E.; Niedzwiecki, R. W.; Nainiger, J. J.

    1979-01-01

    The technical progress made during the first 15 months of a planned 40-month project to provide a critical-technology data base for utility gas-turbine systems capable of burning coal-derived fuels is summarized. Tasks were included in the following areas: (1) combustion, to study the combustion of coal-derived fuels and conversion of fuel-bound nitrogen to NOx; (2) materials, to understand and prevent hot corrosion; and (3) system studies, to integrate and guide the other technologies. Significant progress was made.

  3. OPTIMIZING OUTCOME IN THE UNIVERSITY-INDUSTRY TECHNOLOGY TRANSFER PROJECTS

    Directory of Open Access Journals (Sweden)

    Hamed ALAVI

    2016-04-01

    Full Text Available Transferring inventions of academic scientists to private enterprises for the purpose of commercialization is long known as University-Industry (firm Technology Transfer While the importance of this phenomenon is simultaneously raising in public and private sector, only a part of patented academic inventions succeed in passing the process of commercialization. Despite the fact that formal Technology Transfer process and licencing of patented innovations to third party is the main legal tool for safeguarding rights of academic inventors in commercialization of their inventions, it is not sufficient for transmitting tacit knowledge which is necessary in exploitation of transferred technology. Existence of reciprocal and complementary relations between formal and informal technology transfer process has resulted in formation of different models for university-industry organizational collaboration or even integration where licensee firms keep contact with academic inventors after gaining legal right for commercialization of their patented invention. Current paper argues that despite necessity for patents to legally pass the right of commercialization of an invention, they are not sufficient for complete knowledge transmission in the process of technology transfer. Lack of efficiency of formal mechanism to end the Technology Transfer loop makes an opportunity to create innovative interpersonal and organizational connections among patentee and licensee company. With emphasize on need for further elaboration of informal mechanisms as critical and underappreciated aspect of technology transfer process, article will try to answer the questions of how to optimize knowledge transmission process in the framework of University-Industry Technology Transfer Projects? What is the theoretical basis for university-industry technology transfer process? What are organization collaborative models which can enhance overall performance by improving transmission of

  4. Implementation of Relevant Methods in Assessing Traffic-Technological Projects

    Directory of Open Access Journals (Sweden)

    Danijela Barić

    2007-09-01

    Full Text Available The assessment of investment traffic-technological projectsmeans a set of activities whose basic aim is to determine the justificationand feasibility of the projects. The decision-makingprocess, including the decision-making on investments is an extremelycomplex process, and the decision-maker has to have avision of the future and make decisions accordingly in a modemand flexible manner. Therefore, the decisions need to be theresult of a planning and research process based on relevant scientificmethods. The work includes the selected, analysed andpresented methods of cost-benefit analysis, methods of multi-criteria decision-making and SWOT (Strengths, Weaknesses,Opportunities, and Threats analysis methods. Regarding thebasic characteristics, the mentioned methods have been compared,the order of their implementation has been determined,and then they have been implemented in assessing the traffic-technological projects of reconstmction with the aim of selectingthe optimal variant solution.

  5. Technology and commercial supply of components for the LHC project

    CERN Document Server

    Faugeras, Paul E

    1998-01-01

    After a brief reminder of the motives and the outline of the Large Hadron Collider (LHC) project, one will review the technology and the hardware to be built up. The LHC calls for High Tech innovation s in superconductivity, cryogenics with superfluid helium, ultra high vacuum, surface treatments, etc. which have to be transferred to Industry and produced on a large scale. It will also make extensi ve use of more conventional technology, but because of the intrinsic complexity of the machine and of the international nature of its funding and procurement sources, it will require sophisticated man agement and logistics tools to minimize costs and installation time. The planning for the whole project will be given with an indication of the nature and time schedule of the major contracts.

  6. A Tailored Systems Engineering Framework for Science and Technology Projects

    Science.gov (United States)

    2009-03-01

    developments, and maybe even humanity’s grand challenges [ NAE , 2008]) and allows scientists, technologists, engineers, and project managers the opportunity...application (in which case the process is usually executed at the TD level), or cross- and multi-discipline technology solutions (executed at the enterprise...E. Director, United States Air Force Center for Systems Engineering, Wright-Patterson AFB OH. Personal Interview. 21 July 2008. [ NAE , 2008

  7. ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

    Science.gov (United States)

    Baresi, Larry

    1989-03-01

    The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

  8. NASA Fixed Wing Project: Green Technologies for Future Aircraft Generation

    Science.gov (United States)

    Del Rosario, Ruben; Koudelka, John M.; Wahls, Rich; Madavan, Nateri

    2014-01-01

    Commercial aviation relies almost entirely on subsonic fixed wing aircraft to constantly move people and goods from one place to another across the globe. While air travel is an effective means of transportation providing an unmatched combination of speed and range, future subsonic aircraft must improve substantially to meet efficiency and environmental targets.The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. Multidisciplinary advances are required in aerodynamic efficiency to reduce drag, structural efficiency to reduce aircraft empty weight, and propulsive and thermal efficiency to reduce thrust-specific energy consumption (TSEC) for overall system benefit. Additionally, advances are required to reduce perceived noise without adversely affecting drag, weight, or TSEC, and to reduce harmful emissions without adversely affecting energy efficiency or noise.The paper will highlight the Fixed Wing project vision of revolutionary systems and technologies needed to achieve these challenging goals. Specifically, the primary focus of the FW Project is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe

  9. Bringing technology to students’ proximity: a sociocultural account of technology-based learning projects

    OpenAIRE

    Evode Mukama

    2014-01-01

    This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs) through a sociocultural perspective. The methodology included focus-group discussions and field notes to collect empirical data. The findings reveal that the more educational technologies capture objects of learning positioned in the students’ ...

  10. Science Fairs and Projects K-8. A Collection of Articles Reprinted from "Science and Children,""Science Scope," and "The Science Teacher."

    Science.gov (United States)

    Watt, Shirley, Ed.; And Others

    The National Science Teachers Association (NSTA) has assembled this collection of reprints to assist teachers in organizing a science fair, working with students and establishing equitable judging procedures. The NSTA position statement on science fairs is included. The 24 reprints in this volume are geared toward elementary and middle school…

  11. Implementing Biogas Technology Project in Malvar, Batangas, Philippines

    Directory of Open Access Journals (Sweden)

    Juvy G. Mojares

    2015-11-01

    Full Text Available This study sought to determine the environmental and social impacts of the biogas technology project of the municipal government of Malvar, Batangas, Philippines, through the Municipal Environment and Natural Resources Office. Document analysis and interview were employed in this study. Results showed that heat and electricity generation from biogas decreased dependency on electricity and fuel oil.In terms of social impacts, the biogas technology contributed to socio-economic improvement of the barangay in the form of job creation, technological and skills transfer through training in biogas production, contribution to continuous pursuing of energy neutrality and encouraged sustainability development at the community level. Aside from these, the technology was a source of organic fertilizer for the farming community of Malvar. It is recommended that commercial farms be strictly monitored and ordinances be imposed on them specifically on the use of biogas technology. The municipal government could partner with GOs and NGOs providing grant or equipment for such technology. For the monitoring of backyard farms, develop close coordination with barangay officials, if it does not work, plan a consultative meeting with agencies concerned to explain the hazards of improper disposal of hog wastes.

  12. Waste-to-energy technologies and project implementation

    CERN Document Server

    Rogoff, Marc J

    2011-01-01

    This book covers in detail programs and technologies for converting traditionally landfilled solid wastes into energy through waste-to-energy projects. Modern Waste-to-Energy plants are being built around the world to reduce the levels of solid waste going into landfill sites and contribute to renewable energy and carbon reduction targets. The latest technologies have also reduced the pollution levels seen from early waste incineration plants by over 99 per cent. With case studies from around the world, Rogoff and Screve provide an insight into the different approaches taken to the planning and implementation of WTE. The second edition includes coverage of the latest technologies and practical engineering challenges as well as an exploration of the economic and regulatory context for the development of WTE.

  13. Validity and Fairness

    Science.gov (United States)

    Kane, Michael

    2010-01-01

    This paper presents the author's critique on Xiaoming Xi's article, "How do we go about investigating test fairness?," which lays out a broad framework for studying fairness as comparable validity across groups within the population of interest. Xi proposes to develop a fairness argument that would identify and evaluate potential fairness-based…

  14. Test Fairness: A Response

    Science.gov (United States)

    Davies, Alan

    2010-01-01

    This article presents the author's response to Xiaoming Xi's paper titled "How do we go about investigating test fairness?" In the paper, Xi offers "a means to fully integrate fairness investigations and practice". Given the current importance accorded to fairness in the language testing community, Xi makes a case for viewing fairness as an aspect…

  15. Building Information Modelling (BIM) and Unmanned Aerial Vehicle (UAV) technologies in infrastructure construction project management and delay and disruption analysis

    Science.gov (United States)

    Vacanas, Yiannis; Themistocleous, Kyriacos; Agapiou, Athos; Hadjimitsis, Diofantos

    2015-06-01

    Time in infrastructure construction projects has always been a fundamental issue as early as from the inception of a project, during the construction process and often after the completion and delivery. In a typical construction contract time related matters such as the completion date and possible delays are among the most important issues that are dealt with by the contract provisions. In the event of delay there are usually provisions for extension of time award to the contractor with possible reimbursement for the extra cost and expenses caused by this extension of time to the contract duration. In the case the contractor is not entitled to extension of time, the owner will be possibly entitled to amounts as compensation for the time prohibited from using his development. Even in the event of completion within the time agreed, under certain circumstances a contractor may have claims for reimbursement for extra costs incurred due to induced acceleration measures he had to take in order to mitigate disruption effects caused to the progress of the works by the owner or his representatives. Depending on the size of the project and the agreement amount, these reimbursement sums may be extremely high. Therefore innovative methods with the exploitation of new technologies for effective project management for the avoidance of delays, delay analysis and mitigation measures are essential; moreover, methods for collecting efficiently information during the construction process so that disputes regarding time are avoided or resolved in a quick and fair manner are required. This paper explores the state of art for existing use of Building Information Modelling (BIM) and Unmanned Aerial Vehicles (UAV) technologies in the construction industry in general. Moreover the paper considers the prospect of using BIM technology in conjunction with the use of UAV technology for efficient and accurate as-built data collection and illustration of the works progress during an

  16. Projects at the Western Environmental Technology Office. Quarterly technical progress report, April 1--June 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This report contains brief outlines of the multiple projects under the responsibility of the Western Environmental Technology Office in Butte Montana. These projects include biomass remediation, remediation of contaminated soils, mine waste technology, and several other types of remediation.

  17. Local participation in complex technological projects as bridging between different communities in Belgium

    NARCIS (Netherlands)

    Sips, K.; Craps, M.; Dewulf, A.

    2013-01-01

    Local community participation in complex technological projects, where technological innovations and risks need to be managed, is notoriously challenging. Relations with local inhabitants easily take the form of exclusion, protest, controversy or litigation. While such projects represent

  18. Bringing Technology to Students' Proximity: A Sociocultural Account of Technology-Based Learning Projects

    Science.gov (United States)

    Mukama, Evode

    2014-01-01

    This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs) through a sociocultural perspective. The methodology included focus group discussions and field…

  19. A Kinder-Science Fair

    Science.gov (United States)

    Torres, Angelica; Vitti, Debbye

    2007-01-01

    A science fair might be the last thing you think of when planning a kindergarten science curriculum, but the authors found it to be the perfect avenue for teaching their students science-process skills. Here they share their steps in teaching science-process skills and assembling student projects in a kindergarten classroom throughout the year.…

  20. Health fairs bring wellness concepts to life.

    Science.gov (United States)

    Serina, M; Giove, S

    1991-01-01

    Incorporated into the nursing curriculum, the health fair is a stimulating, unique, nontraditional educational project that examines effective health education tools, leadership skills, and interaction with the community. Students test theories and collaborate with other school disciplines while planning, implementing, and evaluating health education and health fair promotion. Health fairs help students to identify positive lifestyles and create opportunities to test the skills needed to improve the population's wellness level.

  1. Fair value accounting

    OpenAIRE

    Shamkuts, Volha, 1977-

    2010-01-01

    The thesis is devoted to fair value accounting. Fair value accounting implies that assets and liabilities get measured and reported in firm´s financial statements at their market value. The purpose of the thesis is to analyze the conceptual foundations of fair value accounting. The thesis is organized in the following way. First, origins and development of fair value accounting are discussed. Second, overview of fair value accounting is presented. The overview includes de...

  2. Java Fair Threads

    OpenAIRE

    Boussinot, Frédéric

    2001-01-01

    Fair threads are cooperative threads run by a fair scheduler which gives them equal access to the processor. Fair threads can communicate using broadcast events, and are fully portable as their semantics does not depends on the executing platform. Fine control over fair threads execution is possible allowing the programming of specific user-defined scheduling strategies. This paper presents fair threads in the context of the Java language, and describes the API to use them. Link with reactive...

  3. Science Fairs: Promoting Positive Attitudes Towards Science from Student Participation

    Science.gov (United States)

    Wilson, Janell D.; Cordry, Sheila; Unline, Carol

    2004-01-01

    The purpose of the article is to describe step by step procedures teachers can use to successfully engage their students in the development of science fair projects. The article further explains how the student should prepare their science fair project for science fair competition. It is expected that increasing student participation in science…

  4. Google Science Fair winner visits CERN

    CERN Multimedia

    Katarina Anthony

    2012-01-01

    Google Science Fair Grand Prize winner Brittany Michelle Wenger today wrapped up a day-and-a-half's visit of the CERN site. Her winning project uses an artificial neural network to diagnose breast cancer – a non-invasive technique with significant potential for use in hospitals.   Brittany Michelle Wenger at CERN's SM18 Hall. Besides winning a $50,000 scholarship from Google and work experience opportunities with some of the contest hosts, Brittany was offered a personal tour of CERN. “This visit has just been incredible,” she says. “I got to speak with [CERN's Director for Accelerators and Technology] Steve Myers about some of the medical applications and technologies coming out of the LHC experiments and how they can be used to treat cancer. We talked about proton therapy and hadron therapy, which could really change the way patients are treated, improving success rates and making treatment not such an excruciating process. That ...

  5. Bringing Technology to Students’ Proximity: A Sociocultural Account of Technology-Based Learning Projects

    Directory of Open Access Journals (Sweden)

    Evode Mukama

    2014-12-01

    Full Text Available This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs through a sociocultural perspective. The methodology included focus-group discussions and field notes to collect empirical data. The findings reveal that the more educational technologies capture objects of learning positioned in the students’ sociocultural proximity, the more focused the learners’ attention is on these objects. The study shows also that a change in learning projects may depend to a large extent on whether the technology relates to the students’ sociocultural proximity, that is, taking into consideration students’ physical, cultural, and contextual real world. The study recommends a community of learning/inquiry embedded in a collaborative, problem-solving dynamic involving cognitive support from peers, teachers, external specialists, and the wider community.

  6. Technical cooperation front line. JICA technology cooperation project in Indonesia and Vietnam (Coal mining technology enhancement project in Indonesia); (Coal Mine Firedamp Gas Management Center in Vietnam)

    Energy Technology Data Exchange (ETDEWEB)

    Inami, K. [Japan Coal Energy Center (Japan). Technical Service Group, Engineering Dept.

    2002-09-01

    In April 2001, two coal mining technical cooperation projects of Japan International Cooperation Agency (JICA) started. The first project is 'Coal Mining Technology Enhancement Project in Indonesia'. The second project is 'Coal Mine Firedamp Gas Management Center in Vietnam'. Both are project-type technical cooperation for the technology transfer centering in advanced Japanese underground coal mine technologies for a five years project period from April 1 2001 to 31 March 2006. Japan Coal Energy Center (JCOAL) have carried out indirect supporting function for the planning and the execution of the project from the preparation phase of the project start-up as a supporting agency based on the business agreement with JICA. This paper reports the projects development. 2 figs., 1 tab.

  7. Laboratory technology research - abstracts of FY 1997 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. A distinguishing feature of the ER multi-program national laboratories is their ability to integrate broad areas of science and engineering in support of national research and development goals. The LTR program leverages this strength for the Nation`s benefit by fostering partnerships with US industry. The partners jointly bring technology research to a point where industry or the Department`s technology development programs can pursue final development and commercialization. Projects supported by the LTR program are conducted by the five ER multi-program laboratories. These projects explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials; intelligent processing/manufacturing research; and sustainable environments.

  8. From RISING to the DESPEC fast-timing project within NUSTAR at FAIR: Sub-nanosecond nuclear timing spectroscopy with LaBr{sub 3} scintillators

    Energy Technology Data Exchange (ETDEWEB)

    Regan, P.H., E-mail: p.regan@surrey.ac.uk [Department of Physics, University of Surrey, Guildford GU2 7XH (United Kingdom)

    2012-07-15

    This paper summarises a presentation given at the IRRMA8 conference in June 2011 which reviewed briefly the topic of current research studies in the evolution of nuclear structure with changing proton and neutron numbers. A short review of relevant contemporary spectroscopic studies of the structure of nuclei with highly exotic N/Z ratios using projectile fragmentation and fission reactions is given, together with an overview of some of the physics research aims to be attacked using the proposed Decay Spectroscopy (DESPEC) LaBr{sub 3} Fast-Timing gamma-ray array for the NUSTAR project at the upcoming Facility for Anti-Proton and Ion Research (FAIR). Examples of recent results using both 'isomer' and {beta}{sup -}-delayed gamma-ray decay measurements with the Stopped RISING hyper-pure germanium array at GSI are summarised and used to highlight some of the fundamental physics studies which are expected to become available in this area of research in the coming decade. Examples of the performance of cerium-doped LaBr{sub 3} detectors from 'in-beam' test experiments are presented together with initial plans for the geometry of the planned multi-detector LaBr{sub 3}(Ce) array for DESPEC. - Highlights: Black-Right-Pointing-Pointer The paper presents an overview of nuclear excitation systematics in even-even nuclei. Black-Right-Pointing-Pointer The paper gives a description of the Stopped RISING gamma-ray spectrometer. Black-Right-Pointing-Pointer This paper gives some of the recent scientific results in nuclear spectroscopy of exotic nuclei. Black-Right-Pointing-Pointer The paper shows the use of halide scintillation detectors for gamma-ray decay studies of nuclei. Black-Right-Pointing-Pointer This paper shows the use of LaBr{sub 3} detectors to nuclear excited state lifetimes in the ns regime.

  9. 75 FR 77379 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2010-12-10

    .... Classification Standards d. Fair Labor Standards Act (FLSA) (1) Guidelines for FLSA Determinations (2... Labor Standards Act. Corrected Figure 4 by including the word `review' for Pay Band III of the... demonstration project, standard operating procedures and policies will be such that employees receive...

  10. Technology Base Research Project for electrochemical energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, Kim (ed.)

    1991-06-01

    The US DOE's Office of Propulsion Systems provides support for an electrochemical energy storage program, which includes R D on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The general R D areas addressed by the project include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the development of air-system (fuel cell, metal/air) technology for transportation applications. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs. The TBR Project is divided into three major project elements: Exploratory Research, Applied Science Research, and Air Systems Research. Highlights of each project element are summarized according to the appropriate battery system or electrochemical research area. 16 figs., 4 tabs.

  11. Ceramics Technology Project database: September 1991 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    The piston ring-cylinder liner area of the internal combustion engine must withstand very-high-temperature gradients, highly-corrosive environments, and constant friction. Improving the efficiency in the engine requires ring and cylinder liner materials that can survive this abusive environment and lubricants that resist decomposition at elevated temperatures. Wear and friction tests have been done on many material combinations in environments similar to actual use to find the right materials for the situation. This report covers tribology information produced from 1986 through July 1991 by Battelle columbus Laboratories, Caterpillar Inc., and Cummins Engine Company, Inc. for the Ceramic Technology Project (CTP). All data in this report were taken from the project`s semiannual and bimonthly progress reports and cover base materials, coatings, and lubricants. The data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies, but not to draw conclusions from these data.

  12. Ceramic Technology Project data base: September 1992 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1993-06-01

    Data presented in this report represent an intense effort to improve processing methods, testing methods, and general mechanical properties (rupture modulus, tensile, creep, stress-rupture, dynamic and cyclic fatigue, fracture toughness) of candidate ceramics for use in advanced heat engines. This work was performed by many facilities and represents only a small part of the data generated by the Ceramic Technology Project (CTP) since 1986. Materials discussed include GTE PY6, GN-10, NT-154, NT-164, SN-260, SN-251, SN-252, AY6, silicon nitride combined with rare-earth oxides, Y-TZP, ZTA, NC-433, NT-230, Hexoloy SA, MgO-PSZ-to-MgO-PSZ joints, MgO-PSZ-to-cast iron, and a few whisker/fiber-reinforced ceramics. Information in this report was taken from the project`s semiannual and bimonthly progress reports and from final reports summarizing the results of individual studies. Test results are presented in tabular form and in graphs. All data, including test rig descriptions and material characterizations, are stored in the CTP data base and are available to all project participants on request. The objective of this report is to make available the test results from these studies but not to draw conclusions from those data.

  13. Laboratory technology research: Abstracts of FY 1998 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of the country: the world-class basic research capability of the DOE Office of Science (SC) national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program in FY 1998 explore the applications of basic research advances relevant to DOE`s mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing and manufacturing research, and environmental and biomedical research. Abstracts for 85 projects are contained in this report.

  14. An evaluation approach for research project pilot technological applications

    Science.gov (United States)

    Marcelino-Jesus, Elsa; Sarraipa, Joao; Jardim-Goncalves, Ricardo

    2013-10-01

    In a world increasingly more competitive and in a constantly development and growth it's important that companies have economic tools, like frameworks to help them to evaluate and validate the technology development to better fits in each company particular needs. The paper presents an evaluation approach for research project pilot applications to stimulate its implementation and deployment, increasing its adequacy and acceptance to their stakeholders and consequently providing new business profit and opportunities. Authors used the DECIDE evaluation framework as a major guide to this approach, which was tested in the iSURF project to support the implementation of an interoperability service utility for collaborative supply chain planning across multiple domains supported by RFID devices.

  15. Laboratory Technology Research: Abstracts of FY 1996 projects

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The Laboratory Technology Research (LTR) program supports high-risk, multidisciplinary research partnerships to investigate challenging scientific problems whose solutions have promising commercial potential. These partnerships capitalize on two great strengths of this country: the world-class basic research capability of the DOE Energy Research (ER) multi-program national laboratories and the unparalleled entrepreneurial spirit of American industry. Projects supported by the LTR program are conducted by the five ER multi-program laboratories: Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, and Pacific Northwest National Laboratories. These projects explore the applications of basic research advances relevant to Department of Energy`s (DOE) mission over a full range of scientific disciplines. The program presently emphasizes three critical areas of mission-related research: advanced materials, intelligent processing/manufacturing research, and sustainable environments.

  16. The Entrepreneur Fair: Fifth Grade Student Businesses

    Science.gov (United States)

    Moore, Teresa

    2010-01-01

    In twenty years of teaching, the author has never been involved in a project that sparked as much enthusiasm from students, parents, the administration, and other teachers as the Entrepreneur Fair. In an effort to challenge students to become entrepreneurs, the author developed a one-day market called the Entrepreneur Fair at Stonewall Elementary…

  17. Exploring the Relationship between Authentic Leadership and Project Outcomes and Job Satisfaction with Information Technology Professionals

    Science.gov (United States)

    Fischer, Mark A.

    2014-01-01

    One of the most important issues for organizations and information technology (IT) professionals is measuring the success or failure of information technology projects. How we understand the value and usefulness of IT projects is critical to how information technology executives evaluate and decide on technology investments. In a 2009 CHAOS…

  18. Exploring the Relationship between Authentic Leadership and Project Outcomes and Job Satisfaction with Information Technology Professionals

    Science.gov (United States)

    Fischer, Mark A.

    2014-01-01

    One of the most important issues for organizations and information technology (IT) professionals is measuring the success or failure of information technology projects. How we understand the value and usefulness of IT projects is critical to how information technology executives evaluate and decide on technology investments. In a 2009 CHAOS…

  19. Ceramic Technology Project database: September 1990 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    Data generated within the Ceramic Technology Project (CTP) represent a valuable resource for both research and industry. The CTP database was created to provide easy access to this information in electronic and hardcopy forms by using a computerized database and by issuing periodic hardcopy reports on the database contents. This report is the sixth in a series of semiannual database summaries and covers recent additions to the database, including joined brazed specimen test data. It covers 1 SiC, 34 SiN, 10 whisker-reinforced SiN, 2 zirconia-toughened aluminas, 8 zirconias, and 34 joints.

  20. 1990 DOE/SANDIA crystalline photovoltaic technology project review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Ruby, D.S. (ed.)

    1990-07-01

    This document serves as the proceedings for the annual project review meeting held by Sandia's Photovoltaic Cell Research Division and Photovoltaic Technology Division. It contains information supplied by each organization making a presentation at the meeting, which was held August 7 through 9, 1990 at the Sheraton Hotel in Albuquerque, New Mexico. Sessions were held to discuss national photovoltaic programs, one-sun crystalline silicon cell research, concentrator silicon cell research, concentrator 3-5 cell research, and concentrating collector development.

  1. 1992 DOE/Sandia crystalline photovoltaic technology project review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Maish, A. [ed.

    1992-07-01

    This document serves as the proceedings for the annual project review meeting held by Sandia National Laboratories` Photovoltaic Technology and Photovoltaic Evaluation Departments. It contains information supplied by organizations making presentations at the meeting, which was held July 14--15, 1992 at the Sheraton Old Town Hotel in Albuquerque, New Mexico. Overview sessions covered the Department of Energy (DOE) program, including those at Sandia and the National Renewable Energy Laboratory (NREL), and non-DOE programs, including the EPRI concentrator collector program, The Japanese crystalline silicon program, and some concentrating photovoltaic activities in Europe. Additional sessions included papers on Sandia`s Photovoltaic Device Fabrication Laboratory`s collaborative research, cell processing research, the activities of the participants in the Concentrator Initiative Program, and photovoltaic technology evaluation at Sandia and NREL.

  2. The Advanced Linked Extended Reconnaissance & Targeting Technology Demonstration project

    Science.gov (United States)

    Edwards, Mark

    2008-04-01

    The Advanced Linked Extended Reconnaissance & Targeting (ALERT) Technology Demonstration (TD) project is addressing many operational needs of the future Canadian Army's Surveillance and Reconnaissance forces. Using the surveillance system of the Coyote reconnaissance vehicle as an experimental platform, the ALERT TD project aims to significantly enhance situational awareness by fusing multi-sensor and tactical data, developing automated processes, and integrating beyond line-of-sight sensing. The project is exploiting important advances made in computer processing capability, displays technology, digital communications, and sensor technology since the design of the original surveillance system. As the major research area within the project, concepts are discussed for displaying and fusing multi-sensor and tactical data within an Enhanced Operator Control Station (EOCS). The sensor data can originate from the Coyote's own visible-band and IR cameras, laser rangefinder, and ground-surveillance radar, as well as from beyond line-of-sight systems such as mini-UAVs and unattended ground sensors. Video-rate image processing has been developed to assist the operator to detect poorly visible targets. As a second major area of research, automatic target cueing capabilities have been added to the system. These include scene change detection, automatic target detection and aided target recognition algorithms processing both IR and visible-band images to draw the operator's attention to possible targets. The merits of incorporating scene change detection algorithms are also discussed. In the area of multi-sensor data fusion, up to Joint Defence Labs level 2 has been demonstrated. The human factors engineering aspects of the user interface in this complex environment are presented, drawing upon multiple user group sessions with military surveillance system operators. The paper concludes with Lessons Learned from the project. The ALERT system has been used in a number of C4ISR

  3. NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

    Science.gov (United States)

    Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

    2010-01-01

    Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

  4. CERN Book fair

    CERN Multimedia

    CERN Central Library and IT Department Bookshop

    2004-01-01

    The CERN Library, in conjunction with the IT Department Bookshop, is organizing a book fair on the 28th and 29th October. Some 15 major publishers will be represented, including 6 who will be here in person, and more than 700 of their latest titles will be on display (for sale or order). The major topics covered will be computing, physics, technology, mathematics, engineering and popular science. Those present at this event will include Alpha Science, Cambridge University Press, Elsevier, Institute of Physics, Microsoft Press, O'Reilly, OLF Switzerland, Oxford University Press, McGraw-Hill, Springer, Pearson, Thali Switzerland, Wiley, World Scientific and Ebooks Corporation. The fair will take place on the first floor of the Main Building (bldg.60), Salle des Pas Perdus, and will be open from 10.00 to 17.00 on both days. In addition, EBooks Corporation will describe their electronic book system; insight into this is available at http://www.eblib.com/ We look forward to your support for this initiative. Sh...

  5. The NUSTAR program at FAIR

    Directory of Open Access Journals (Sweden)

    Herlert Alexander

    2014-04-01

    Full Text Available The NUSTAR Collaboration brings together several hundred scientists to form one of the four scientific pillars of the future FAIR facility. NUSTAR aims at the exploitation of intense radioactive beams with energies up to 1.5 GeV/u in order to explore nuclei with large neutron or proton excess. The project has evolved over the last years and now reached a state where a large fraction of the core program is financed, partly built, and even ready for operation. With the signing of the FAIR convention in 2010 and the start of construction, the sub-projects in NUSTAR gain momentum and look forward to commissioning and first beams in this decade. The present status of the project will be presented, focusing on the instrumentation to be applied in the various experimental areas behind the Super-FRS fragment separator, which is the central instrument of NUSTAR.

  6. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Young Cheol; Kim, Kyoung Pyo; Yi, Ji Ho (and others)

    2007-12-15

    The results and contents of the project are as follows; - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. - Domestic INIS project has carried out various activities on supporting a decision-making for INIS Secretariat, exchanges of the statistical information between INIS and the country, and technical assistance for domestic end-users using INIS database. - Based on the construction of INIS database sent by member states, the data published in the country has been gathered, collected, and inputted to INIS database according to the INIS reference series. - Using the INIS output data, it has provided domestic users with searching INIS CD-ROM DB and INIS online database, INIS SDI service, non-conventional literature delivery services and announce INIS to users. - Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy information and computer software developed in the advanced countries.

  7. Towards a Fair Global Economic Regime?

    DEFF Research Database (Denmark)

    Staricco, Juan Ignacio

    This dissertation offers an assessment of Fair Trade’s transformative potential through an empirical examination of the case of Fair Trade wine produced in Argentina and consumed in the United Kingdom. Guided by a dialectical understanding of the research process, the analysis is done at various...... levels of generality, offering both case-specific and universal arguments about the Fair Trade system as a whole. Theoretically, the dissertation develops a regulationist framework based on a critical engagement with the French Regulation Approach and the Amsterdam Project in International Political....... The further exploration of Fair Trade’s political and ideological dimensions sheds light on the reasons behind the system’s current limitations. The analysis shows that Fair Trade offers very limited improvements compared to the conventional economy. Additionally, for the Argentinean wine industry, Fair Trade...

  8. Benefits from the U.S. photovoltaic manufacturing technology project

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, R.L.; Witt, C.E.; Thomas, H.P. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1996-05-01

    This paper examines the goals of the Photovoltaic Manufacturing Technology (PVMaT) project and its achievements in recapturing the investment by the photovoltaic (PV) industry and the public in this research. The PVMaT project was initiated in 1990 with the goal of enhancing the world-wide competitiveness of the U.S. PV industry. Based on the authors analysis, PVMaT has contributed to PV module manufacturing process improvements, increased product value, and reductions in the price of today`s PV products. An evaluation of success in this project was conducted using data collected from 10 of the PVMaT industrial participants in late fiscal year (FY) 1995. These data indicate a reduction of 56% in the weighted average module manufacturing costs from 1992 to 1996. During this same period, U.S. module manufacturing capacity has increased by more than a factor of 6. Finally, the analysis indicates that both the public and the manufacturers will recapture the funds expended in R&D manufacturing improvements well before the year 2000.

  9. Evaluation of Representative Smart Grid Investment Grant Project Technologies: Thermal Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Tuffner, Francis K.; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of energy storage technologies deployed in the SGIG projects.

  10. CERN Scientific Book Fair 2013

    CERN Document Server

    CERN Library

    2013-01-01

    The CERN Bookshop and CERN Library invite you to attend the 2013 CERN Book Fair, a two-day scientific event offering you the opportunity to meet key publishers and to browse and purchase books at significant discounts.   Key publishers will present a selection of titles in physics, technology, mathematics, engineering, computing and popular science. You are welcome to come along and meet the publishers’ representatives or simply have a look at the books on sale. The fair will take place in the Main Building (Bldg. 500) on the ground floor near Restaurant 1 on Monday 9 and Tuesday 10 September. Participating or represented publishers include: Oxford University Press, Princeton University Press, Springer, Wiley, and World Scientific-Imperial College Press. Fair opening times:  - Monday 9 September 9:00 - 18:00  - Tuesday 10 September 9:00 - 18:00

  11. CERN scientific book fair 2010

    CERN Multimedia

    CERN Library

    2010-01-01

    The CERN Bookshop and CERN Library invite you to attend the 2010 CERN Book Fair, a two-day scientific event offering you the opportunity to meet key publishers and to browse and purchase books at significant discounts.   Some twelve companies will be present and will bring with them a selection of titles in physics, technology, mathematics, engineering, computing and popular science. You are welcome to come along and meet the publishers’ representatives or simply have a look to the books on offer. The Fair will take place in the Main Building (bldg. 500) on the ground floor near the Restaurant 1 on Tuesday 7th and Wednesday 8th September. Participating or represented publishers include: Cambridge University Press, EPFL Press – PPUR, Oxford University Press, Imperial College Press, McGraw-Hill, Oxford University Press, Pearson Education, Princeton University Press, Springer, Taylor and Francis, Wiley, World Scientific. Fair opening times: Tuesday 7 September 9:00 &ndash...

  12. Project-based Supply Chain Crossorganizational Bidirectional Incentives Based on Fairness Preference Theory%基于公平偏好的项目导向型供应链双向激励

    Institute of Scientific and Technical Information of China (English)

    吴光东; 施建刚; 唐代中

    2011-01-01

    在项目型组织之间平等合作的基础上,引入公平偏好理论,从最大化项目价值增值效用角度,建立项目导向型供应链跨组织双向激励模型,剖析项目型组织的努力水平、公平偏好程度、支付成本和分配系数对项目价值增值的影响,并对模型分析结果进行数据模拟和算例分析.结果表明,在项目型组织具有公平偏好情况下,项目导向型供应链实施跨组织双向激励策略不仅可实现项目价值增值的最大化,使得项目型组织合理分配资源和努力水平,而且可实现合作双方收益的改善和支付成本的降低.%On the basis of equal cooperation between project-based enterprises, the fairness preference theory was applied to constructing project-based supply chain cross-organizational bidirectional incentives model from the view of maximizing project value-adding, thus an analysis was made of the influence of project-based enterprises' effects level, fairness preference degree and project value-adding allocation coefficient on project-based supply chain project value-adding, and then the related digital simulation and example analysis were presented for the purpose of proofing the model theoretical analysis conclusions. The results reflect that, while under the condition that project-based enterprises have fairness preference, the project-based supply chain implemented cross-organizational bidirectional incentives strategy not only can achieve project value-addingmaximization, which prompts project-based enterprises allocating resources and efforts level reasonably, but as well realize project-based supply chain benefits improvement and payment cost reduction between the cooperative partners.

  13. Resizing Triathlons for Fairness.

    Science.gov (United States)

    Wainer, Howard; De Veaux, Richard D.

    As currently configured, triathlons are dominated by cyclists and runners. The concept of fairness, as applied to triathlons, suggests that a cyclist, runner, and swimmer, all equally proficient, can each traverse the associated segment of the triathlon in approximately equal times. This definition of fairness is used to derive fair triathlon…

  14. Using Information and Communication Technologies in Hospital Classrooms: SAVEH Project

    Directory of Open Access Journals (Sweden)

    Dolores Meneses

    2011-03-01

    Full Text Available Children suffering a serious illness, experience enormous changes in their daily lives. Not only does the direct consequences of the disease affect the child, but also the fact of being at a hospital, or at home and not being allowed to go to school. Frequently, connections with classmates, neighbors, and sometimes even some with his relatives are lost. Furthermore, the responsibility of the state, to continue his schooling process is much harder, since different communities (family, school teachers, hospital teachers, medical doctors, psychologists… have to be coordinated. Last but not least, entertainment and enjoyment should be provided to avoid boredom and to improve their affective state. At the same time, with the development of Information and Communication Technologies, a large number of solutions have arisen that allow people to enhance their communication, education and entertainment possibilities. These technologies seem perfectly suitable to be used to tackle the problems described above. In this article, some of the special necessities of children suffering from a serious illness are pointed out, technologies available to be facilitated are described and some initiatives taking place in Spain mentioned. The SAVEH project will be described in detail.

  15. Flexible Electrostatic Technology for Capture and Handling Project

    Science.gov (United States)

    Keys, Andrew; Bryan, Tom; Horwitz, Chris; Rakoczy, John; Waggoner, Jason

    2015-01-01

    previous MSFC and NASA proposals or concepts can now be realized or simplified by the development of the this initial and future FETCH grippers including commercial resupply, Exploration vehicle assembly, Satellite servicing, and orbital debris removal since a major part of these missions is to align to and capture some handle. Completed Project (2013 - 2014) Flexible Electrostatic Technology for Capture & Handling Project Center Innovation Fund: MSFC CIF Program | Space Technology Mission Directorate (STMD) For more information visit techport.nasa.gov Some NASA technology projects are smaller (for example SBIR/STTR, NIAC and Center Innovation Fund), and will have less content than other, larger projects. Newly created projects may not sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 pounds per square inch or 70-300 lb./sq. ft. of surface contact, the FETCH can turn-on and turn-off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, and precision relocation for accurate anchor adhesion.

  16. Gas Dynamic Spray Technology Demonstration Project Management. Joint Test Report

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    The standard practice for protecting metallic substrates in atmospheric environments is the use of an applied coating system. Current coating systems used across AFSPC and NASA contain volatile organic compounds (VOCs) and hazardous air pollutants (HAPs). These coatings are sUbject to environmental regulations at the Federal and State levels that limit their usage. In addition, these coatings often cannot withstand the high temperatures and exhaust that may be experienced by Air Force Space Command (AFSPC) and NASA structures. In response to these concerns, AFSPC and NASA have approved the use of thermal spray coatings (TSCs). Thermal spray coatings are extremely durable and environmentally friendly coating alternatives, but utilize large cumbersome equipment for application that make the coatings difficult and time consuming to repair. Other concerns include difficulties coating complex geometries and the cost of equipment, training, and materials. Gas Dynamic Spray (GOS) technology (also known as Cold Spray) was evaluated as a smaller, more maneuverable repair method as well as for areas where thermal spray techniques are not as effective. The technology can result in reduced maintenance and thus reduced hazardous materials/wastes associated with current processes. Thermal spray and GOS coatings also have no VOCs and are environmentally preferable coatings. The primary objective of this effort was to demonstrate GDS technology as a repair method for TSCs. The aim was that successful completion of this project would result in approval of GDS technology as a repair method for TSCs at AFSPC and NASA installations to improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination, and reduce the amount of hazardous waste generated.

  17. The Learning Process and Technological Change in Wind Power: Evidence from China's CDM Wind Projects

    Science.gov (United States)

    Tang, Tian; Popp, David

    2016-01-01

    The Clean Development Mechanism (CDM) is a project-based carbon trade mechanism that subsidizes the users of climate-friendly technologies and encourages technology transfer. The CDM has provided financial support for a large share of Chinese wind projects since 2002. Using pooled cross-sectional data of 486 registered CDM wind projects in China…

  18. The Learning Process and Technological Change in Wind Power: Evidence from China's CDM Wind Projects

    Science.gov (United States)

    Tang, Tian; Popp, David

    2016-01-01

    The Clean Development Mechanism (CDM) is a project-based carbon trade mechanism that subsidizes the users of climate-friendly technologies and encourages technology transfer. The CDM has provided financial support for a large share of Chinese wind projects since 2002. Using pooled cross-sectional data of 486 registered CDM wind projects in China…

  19. Factors that Impact Software Project Success in Offshore Information Technology (IT) Companies

    Science.gov (United States)

    Edara, Venkatarao

    2011-01-01

    Information technology (IT) projects are unsuccessful at a rate of 65% to 75% per year, in spite of employing the latest technologies and training employees. Although many studies have been conducted on project successes in U.S. companies, there is a lack of research studying the impact of various factors on software project success in offshore IT…

  20. Soft city culture and technology the Betaville Project

    CERN Document Server

    Skelton, Carl

    2014-01-01

    Soft City Culture and Technology: The Betaville Project discusses the complete cycle of conception, development, and deployment of the Betaville platform. Betaville is a massively participatory online environment for distributed 3D design and development of proposals for changes to the built environment– an experimental integration of art, design, and software development for the public realm. Through a detailed account of Betaville from a Big Crazy Idea to a working "deep social medium", the author examines the current conditions of performance and accessibility of hardware, software, networks, and skills that can be brought together into a new form of open public design and deliberation space, for and spanning and integrating the disparate spheres of art, architecture, social media, and engineering. Betaville is an ambitious enterprise, of building compelling and constructive working relationships in situations where roles and disciplinary boundaries must be as agile as the development process of the soft...

  1. Proceedings of the nuclear criticality technology safety project

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, R.G. [comp.

    1997-06-01

    This document contains summaries of the most of the papers presented at the 1994 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 10 and 11 at Williamsburg, Va. The meeting was broken up into seven sessions, which covered the following topics: (1) Validation and Application of Calculations; (2) Relevant Experiments for Criticality Safety; (3) Experimental Facilities and Capabilities; (4) Rad-Waste and Weapons Disassembly; (5) Criticality Safety Software and Development; (6) Criticality Safety Studies at Universities; and (7) Training. The minutes and list of participants of the Critical Experiment Needs Identification Workgroup meeting, which was held on May 9 at the same venue, has been included as an appendix. A second appendix contains the names and addresses of all NCTSP meeting participants. Separate abstracts have been indexed to the database for contributions to this proceedings.

  2. The JPL parabolic dish project. [solar collectors technology development

    Science.gov (United States)

    Truscello, V. C.; Williams, A. N.

    1980-01-01

    The parabolic dish solar collector is a highly versatile concentrating collector system that can produce heat for many thermal processes and electricity by coupling the collector to a suitable heat engine. This paper discusses a project for the development of these collector systems and summarizes contracts with industry for developing the dish subsystems which include concentrator, receiver, and heat engine. An early market for dishes is the dispersed small community market which depends heavily on oil to operate diesel or steam turbine plants in order to generate electricity. The present contracts with industry for conducting engineering experiments using the developed dish hardware to demonstrate the technology in these early opportunity markets is also discussed.

  3. In search of income reference points for SLCA using a country level sustainability benchmark (part 2): fair minimum wage. A contribution to the Oiconomy project

    NARCIS (Netherlands)

    Croes, Pim R.; Vermeulen, Walter J. V.

    2016-01-01

    Purpose: This paper is part 2 of our twin articles on income reference points for social life cycle assessment (SLCA). The purpose of this article is to provide a well-founded fair minimum wage standard, which enables the determination of the preventative costs for the impact category of unfair

  4. In search of income reference points for SLCA using a country level sustainability benchmark (part 2): fair minimum wage. A contribution to the Oiconomy project

    NARCIS (Netherlands)

    Croes, Pim R.; Vermeulen, Walter J. V.

    2016-01-01

    Purpose: This paper is part 2 of our twin articles on income reference points for social life cycle assessment (SLCA). The purpose of this article is to provide a well-founded fair minimum wage standard, which enables the determination of the preventative costs for the impact category of unfair pric

  5. Shuffling the Deck To Ensure Fairness in Dealing: A Commentary on Some Issues of Equity and Mathematics Education from the Perspective of the QUASAR Project.

    Science.gov (United States)

    Silver, Edward A.

    This paper is a reaction to a plenary address, "Fairness in Dealing: Diversity, Psychology, and Mathematics Education" by Suzanne Damarin (SE 057 179). The issues of intentionality, institutional and instructional practices, identity development, and assessment are addressed in regard to the Quantitative Understanding: Amplifying Student…

  6. Grandma's Games Project: Bridging Tradition and Technology Mediated Education

    Directory of Open Access Journals (Sweden)

    Marina Vasileva

    2014-02-01

    Full Text Available This article presents a project entitled "Grandma’s games", following a research idea to enrich the educational process of K9 students by introducing the traditional children games of our ancestors in the learning environment, revived and adapted for modern students with the aid of information and communication technology. While creating a strong connection between our heritage and the modern educational trends, the project’s intention goes beyond mere fulfilment of educational goals, striving to increase the interest and motivation of primary education students to develop their creativity and originality while learning, with respect of their own personal preferences and cultural heritage. The "Grandma’s games" research project engaged twelve traditional games in the educational activities at primary schools from both rural and non-rural environments in Republic of Macedonia. Descriptive statistics was applied on the data set sampled from the extensive survey conducted among teachers in these schools, to illustrate the benefits from the application of the Grandma’s games in educational process.

  7. ECUT (Energy Conversion and Utilization Technologies Program). Biocatalysis Project

    Science.gov (United States)

    1986-01-01

    Presented are the FY 1985 accomplishments, activities, and planned research efforts of the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Program. The Project's technical activities were organized as follows: In the Molecular Modeling and Applied Genetics work element, research focused on (1) modeling and simulation studies to establish the physiological basis of high temperature tolerance in a selected enzyme and the catalytic mechanisms of three species of another enzyme, and (2) determining the degree of plasmid amplification and stability of several DNA bacterial strains. In the Bioprocess Engineering work element, research focused on (1) studies of plasmid propagation and the generation of models, (2) developing methods for preparing immobilized biocatalyst beads, and (3) developing an enzyme encapsulation method. In the Process Design and Analysis work element, research focused on (1) further refinement of a test case simulation of the economics and energy efficiency of alternative biocatalyzed production processes, (2) developing a candidate bioprocess to determine the potential for reduced energy consumption and facility/operating costs, and (3) a techno-economic assessment of potential advancements in microbial ammonia production.

  8. Review of PV Inverter Technology Cost and Performance Projections

    Energy Technology Data Exchange (ETDEWEB)

    Navigant Consulting Inc.

    2006-01-01

    The National Renewable Energy Laboratory (NREL) has a major responsibility in the implementation of the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program. Sandia National Laboratories (SNL) has a major role in supporting inverter development, characterization, standards, certifications, and verifications. The Solar Energy Technologies Program recently published a Multiyear Technical Plan, which establishes a goal of reducing the Levelized Energy Cost (LEC) for photovoltaic (PV) systems to $0.06/kWh by 2020. The Multiyear Technical Plan estimates that, in order to meet the PV system goal, PV inverter prices will need to decline to $0.25-0.30 Wp by 2020. DOE determined the need to conduct a rigorous review of the PV Program's technical and economic targets, including the target set for PV inverters. NREL requested that Navigant Consulting Inc.(NCI) conduct a review of historical and projected cost and performance improvements for PV inverters, including identification of critical barriers identified and the approaches government might use to address them.

  9. Ceramic Technology Project. Semiannual progress report for April 1993 through September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Ceramic Technology Project was originally developed by the Department of Energy`s Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. During the course of the Ceramic Technology Project, remarkable progress has been made in the development of reliable structural ceramics. However, further work is needed to reduce the cost of ceramics to facilitate their commercial introduction, especially in the highly cost-sensitive automotive market. The work described in this report is organized according to the following WBS project elements: Project Management and Coordination; Materials and Processing; Materials Design Methodology; Data Base and Life Prediction; and Technology Transfer. This report includes contributions from all currently active project participants. Separate abstracts were prepared for the 47 projects reported here.

  10. Fairness and nanotechnology concern.

    Science.gov (United States)

    McComas, Katherine A; Besley, John C

    2011-11-01

    Research suggests that fairness perceptions matter to people who are asked to evaluate the acceptability of risks or risk management. Two separate national random surveys (n = 305 and n = 529) addressed Americans' concerns about and acceptance of nanotechnology risk management in the context of the degree to which they view scientists and risk managers as fair. The first survey investigated general views about scientists across four proposed dimensions of fairness (distributional, procedural, interpersonal, and informational). The results show that respondents who believe that the outcomes of scientific research tend to result in unequal benefits (distributional fairness) and that the procedures meant to protect the public from scientific research are biased (procedural fairness) were more concerned about nanotechnology. Believing scientists would treat them with respect (interpersonal fairness) and ensure access to information (informational fairness) were not significant predictors of concern. The second study also looked at these four dimensions of fairness but focused on perceptions of risk managers working for government, universities, and major companies. In addition to concern, it also examined acceptance of nanotechnology risk management. Study 2 results were similar to those of study 1 for concern; however, only perceived informational fairness consistently predicted acceptance of nanotechnology risk management. Overall, the study points to the value of considering fairness perceptions in the study of public perceptions of nanotechnology. © 2011 Society for Risk Analysis.

  11. Correlational Study of Risk Management and Information Technology Project Success

    Science.gov (United States)

    Gillespie, Seth J.

    2014-01-01

    Many IT projects fail despite the best efforts to keep these projects within budget, schedule, and scope. Few studies have looked at the effect of project risk management tools and techniques on project success. The primary focus of this study was to examine the extent to which utilization of project risk management processes influence project…

  12. Correlational Study of Risk Management and Information Technology Project Success

    Science.gov (United States)

    Gillespie, Seth J.

    2014-01-01

    Many IT projects fail despite the best efforts to keep these projects within budget, schedule, and scope. Few studies have looked at the effect of project risk management tools and techniques on project success. The primary focus of this study was to examine the extent to which utilization of project risk management processes influence project…

  13. A Synthesis and Survey of Critical Success Factors for Computer Technology Projects

    Science.gov (United States)

    Baker, Ross A.

    2012-01-01

    The author investigated the existence of critical success factors for computer technology projects. Current research literature and a survey of experienced project managers indicate that there are 23 critical success factors (CSFs) that correlate with project success. The survey gathered an assessment of project success and the degree to which…

  14. 78 FR 29335 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects

    Science.gov (United States)

    2013-05-20

    ... Management, AMRDEC, 5400 Fowler Road, Redstone Arsenal, AL 35898-5000; ERDC: Personnel Demonstration Project... of the Secretary Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects AGENCY: Office of the Deputy Assistant Secretary of Defense (Civilian Personnel...

  15. 78 FR 64204 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-10-28

    ... published a notice of approval of a personnel management demonstration project for eligible ONR employees... of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration Project, Department of Navy, Office of Naval Research (ONR); Amendment and Corrections AGENCY:...

  16. Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

    Science.gov (United States)

    Jones, Harry

    2005-01-01

    The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation

  17. Thermal Protection System Materials (TPSM): Heat Shield for Extreme Entry Environment Technology (HEEET) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Heatshield for Extreme Entry Environ­ment Technology (HEEET) project seeks to mature a game changing Woven Ther­mal Protection System (TPS) technology to...

  18. Business planning innovative projects: the essence of technology, advantages and disadvantages

    Directory of Open Access Journals (Sweden)

    S.V. Knyaz

    2012-06-01

    Full Text Available The article substantiates the necessity to develop technology business planning innovative projects. Arguments made by the ground analysis of the advantages and disadvantages of existing business planning technologies.

  19. Green technology foresight of products and materials - some reflections and results from an ongoing Danish project

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pedersen, Thomas Thoning; Falch, Morten

    2005-01-01

    The article presents some methodological and theoretical reflections and some preliminary results from a Danish Green Technology Foresight project about environmental friendly products and materials, where the environmental potentials and risks from three technology areas are analysed: nano- bio...

  20. Experiments on extreme states of matter towards HIF at FAIR

    Directory of Open Access Journals (Sweden)

    Sharkov Boris

    2013-11-01

    Full Text Available The Facility for Antiproton and Ion Research in Europe (FAIR will provide worldwide unique accelerator and experimental facilities allowing for a large variety of unprecedented frontier research in extreme state of matter physics and applied science. Indeed, it is the largest basic research project on the roadmap of the European Strategy Forum of Research Infrastructures (ESFRI, and it is cornerstone of the European Research Area. FAIR offers to scientists from the whole world an abundance of outstanding research opportunities, broader in scope than any other contemporary large-scale facility worldwide. More than 2500 scientists are involved in setting up and exploiting the FAIR facility. They will push the frontiers of our knowledge in plasma, nuclear, atomic, hadron and applied physics far ahead, with important implications also for other fields in science such as cosmology, astro and particle physics, and technology. It includes 14 initial experiments, which form the four scientific pillars of FAIR. The main thrust of intense heavy ion and laser beam-matter interaction research focuses on the structure and evolution of extreme state of matter on both a microscopic and on a cosmic scale.

  1. Experiments on extreme states of matter towards HIF at FAIR

    Energy Technology Data Exchange (ETDEWEB)

    Sharkov, Boris, E-mail: boris.sharkov@fair-center.eu [FAIR GmbH, Planckstrasse 1, 64291 Darmstadt (Germany); Varentsov, Dmitry [GSI Helmholtzzentrum für Schwerionenforshung GmbH, Planckstrasse 1, 64291 Darmstadt (Germany)

    2014-01-01

    The Facility for Antiproton and Ion Research in Europe (FAIR) will provide worldwide unique accelerator and experimental facilities allowing for a large variety of unprecedented frontier research in extreme state of matter physics and applied science. Indeed, it is the largest basic research project on the roadmap of the European Strategy Forum of Research Infrastructures (ESFRI), and it is cornerstone of the European Research Area. FAIR offers to scientists from the whole world an abundance of outstanding research opportunities, broader in scope than any other contemporary large-scale facility worldwide. More than 2500 scientists are involved in setting up and exploiting the FAIR facility. They will push the frontiers of our knowledge in plasma, nuclear, atomic, hadron and applied physics far ahead, with important implications also for other fields in science such as cosmology, astro and particle physics, and technology. It includes 14 initial experiments, which form the four scientific pillars of FAIR. The main thrust of intense heavy ion and laser beam-matter interaction research focuses on the structure and evolution of extreme state of matter on both a microscopic and on a cosmic scale.

  2. Technology Performance Report: Duke Energy Notrees Wind Storage Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Wehner, Jeff [Duke Energy Renewables, Charlotte, NC (United States); Mohler, David [Duke Energy Renewables, Charlotte, NC (United States); Gibson, Stuart [Duke Energy Renewables, Charlotte, NC (United States); Clanin, Jason [Duke Energy Renewables, Charlotte, NC (United States); Faris, Don [Duke Energy Renewables, Charlotte, NC (United States); Hooker, Kevin [Duke Energy Renewables, Charlotte, NC (United States); Rowand, Michael [Duke Energy Renewables, Charlotte, NC (United States)

    2015-11-01

    Duke Energy Renewables owns and operates the Notrees Wind Farm in west Texas’s Ector and Winkler counties. The wind farm, which was commissioned in April 2009, has a total capacity of 152.6 MW generated by 55 Vestas V82 turbines, one Vestas 1-V90 experimental turbine, and 40 GE 1.5-MW turbines. The Vestas V82 turbines have a generating capacity of 1.65 MW each, the Vestas V90 turbine has a generating capacity of 1.86 MW, and the GE turbines have a generating capacity of 1.5 MW each. The objective of the Notrees Wind Storage Demonstration Project is to validate that energy storage increases the value and practical application of intermittent wind generation and is commercially viable at utility scale. The project incorporates both new and existing technologies and techniques to evaluate the performance and potential of wind energy storage. In addition, it could serve as a model for others to adopt and replicate. Wind power resources are expected to play a significant part in reducing greenhouse gas emissions from electric power generation by 2030. However, the large variability and intermittent nature of wind presents a barrier to integrating it within electric markets, particularly when competing against conventional generation that is more reliable. In addition, wind power production often peaks at night or other times when demand and electricity prices are lowest. Energy storage systems can overcome those barriers and enable wind to become a valuable asset and equal competitor to conventional fossil fuel generation.

  3. Projects to improve mathematics performance at a university of technology

    Directory of Open Access Journals (Sweden)

    Ina Louw

    2009-09-01

    Full Text Available Lecturers at tertiary institutions have been expressing concern about the quality of students in mathematics for a long time now. Blame is usually placed at the door of secondary schools, but through put figures are still determining state subsidies and as such necessitate institutions to constantly revisit their efforts in terms of improving performance in mathematics. In this article, the results of two studies to improve the mathematics performance at a technical university are reported. The first study took place at the former Technikon Northern Gauteng and was an action research project with an experimental design. The study entailed the implementation of tutorial sessions and it revealed certain traits of tertiary mathematics education. Data were collected through structured observation, questionnaires and focus group interviews. A standardized questionnaire, Study Orientation Questionnaire in Maths (SOM, was introduced and “study habits” was the field in the test that featured most significantly in both the experimental and the control groups. The results revealed, inter alia, that timely assessment is needed to detect and correct misconceptions as soon as possible. It also pointed out that attendance of lectures (and tutorials impacted strongly on performance. Lastly, it was found that students preferred communicating mathematics through the medium of English and not by using their mother tongue. The second project was conducted at the Tshwane University of Technology (TUT and consisted of an investigation into assessment practices in first year mathematics. The study was executed with action research as strategy and data were collected through interviews, questionnaires and focus group interviews. Qualitative and quantitative data were collected and respondents were exposed to contemporary assessment strategies as suggested by OBE. The aim of the study was to enhance the respondents’ insight into contemporary assessment

  4. High Performance Fairness Algorithm for Resilient Packet Ring

    Institute of Scientific and Technical Information of China (English)

    Kangbok; Lee; Sangyeoun; Lee; Heyungsub; Lee; Hyeongho; Lee

    2003-01-01

    Resilient Packet Ring (RPR) is MAN technology with two counter-rotating rings that multiple stations share the bandwidth. The stations on ring must negotiate the allowed rate that they can transmit fairness eligible traffic based on the total amount of uncommitted bandwidth. RPR draft employs distributed bandwidth control algorithm in order to assure global fairness. In this paper, we suggest a new fairness control algorithm termed Congestion Distributed Fairness Algorithm (CDFA) that exhibits better pe...

  5. It's Not Fair

    Science.gov (United States)

    Turner, Jane

    2012-01-01

    Is a "fair test" the only way to carry out science investigations? Many children (and primary teachers) following the National Curriculum in England and Wales would answer "yes" to this question. This is because fair test investigations have historically been promoted in national assessment, published curricula, schemes of work…

  6. Australianness as fairness

    DEFF Research Database (Denmark)

    Plage, Stefanie; Willing, Indigo; Skrbis, Zlatko

    2017-01-01

    such as fairness, openness and egalitarianism effectively enhances cosmopolitan outlooks. It identifies the mechanisms through which these same virtues are mobilized to rationalize the failure to actualize cosmopolitanism in everyday practice. We argue that Australianness understood as the popular ‘fair...

  7. It's Not Fair

    Science.gov (United States)

    Turner, Jane

    2012-01-01

    Is a "fair test" the only way to carry out science investigations? Many children (and primary teachers) following the National Curriculum in England and Wales would answer "yes" to this question. This is because fair test investigations have historically been promoted in national assessment, published curricula, schemes of work and assessment…

  8. Australianness as fairness

    DEFF Research Database (Denmark)

    Plage, Stefanie; Willing, Indigo; Skrbis, Zlatko

    2017-01-01

    such as fairness, openness and egalitarianism effectively enhances cosmopolitan outlooks. It identifies the mechanisms through which these same virtues are mobilized to rationalize the failure to actualize cosmopolitanism in everyday practice. We argue that Australianness understood as the popular ‘fair...

  9. Fairness and Ability Grouping.

    Science.gov (United States)

    Strike, Kenneth A.

    1983-01-01

    A recent controversy regarding ability grouping is that it is often perceived as a means whereby racial or class bias can be subtly transformed into mechanisms of discrimination which exhibit the appearance of fairness and objectivity. This article addresses the question of fairness in ability grouping. (CJB)

  10. Rethinking the Science Fair

    Science.gov (United States)

    Craven, John; Hogan, Tracy

    2008-01-01

    Spring is the season when thousands of creased cardboard pests can be found lodged under the armpits of students and teachers as they observe the educational rite of spring known as the school science fair. A recent visit to a local school's gymnasium to witness one of these events reminded the authors of why they so dislike science fairs. In this…

  11. It's Not Fair

    Science.gov (United States)

    Turner, Jane

    2012-01-01

    Is a "fair test" the only way to carry out science investigations? Many children (and primary teachers) following the National Curriculum in England and Wales would answer "yes" to this question. This is because fair test investigations have historically been promoted in national assessment, published curricula, schemes of work…

  12. Computational Fair Division

    DEFF Research Database (Denmark)

    Branzei, Simina

    Fair division is a fundamental problem in economic theory and one of the oldest questions faced through the history of human society. The high level scenario is that of several participants having to divide a collection of resources such that everyone is satisfied with their allocation -- e.g. two...... heirs dividing a car, house, and piece of land inherited. The literature on fair division was developed in the 20th century in mathematics and economics, but computational work on fair division is still sparse. This thesis can be seen as an excursion in computational fair division divided in two parts...... study alternative and richer models, such as externalities in cake cutting, simultaneous cake cutting, and envy-free cake cutting. The second part of the thesis tackles the fair allocation of multiple goods, divisible and indivisible. In the realm of divisible goods, we investigate the well known...

  13. Elementary school teachers and successful science fairs

    Science.gov (United States)

    Cook, Helen Mounce

    , traveling and reading about science and science fairs. Their practice matched well with the National Science Education Standards (National Research Council, 1996). All of the teachers displayed positive attitudes toward science and science fairs. There appeared to be a relationship between completing a science fair project at school and very positive attitudes toward science fairs and science. The five teachers had more commonalities than differences in their knowledge base, their skills and their attitudes.

  14. Sperner's lemma and fair division

    OpenAIRE

    DAKSKOBLER, LARISA

    2016-01-01

    Fair division is an active research area in Mathematics, Economics, Computer Science, etc. There are many different kinds of fair division problems. These are often named after everyday situations: fair resource allocation, fair cake-cutting, fair chore division, room assignment – rent division, and more. Although many exact and approximative methods for finding fair solutions already exist, the area of fair division still expands and tries to find better solutions for everyday problems. The...

  15. Projects in Technology Education and Fostering Learning: The Potential and Its Realization

    Science.gov (United States)

    Barak, Moshe; Shachar, Ahron

    2008-06-01

    The current study aimed at examining the efficacy of technological projects as learning tools by exploring the following questions: the extent to which projects in technology develop students as independent learners; the types of knowledge the students deal with in working on their projects; the role of problem-solving in technological projects; and how projects integrate into traditional schooling. The subjects were 53 high school (12th grade) students who prepared graduating projects in technology under the supervision of nine teachers. Data were collected by observing the students in the laboratory, administrating two questionnaires to both the students and the teachers, and analyzing 25 portfolios prepared by the students of their projects. The findings indicate that projects in technology provide a good opportunity to engage students in challenging tasks that enhance their learning skills. To maximize this potential, it is necessary to employ the project method from the early stages of learning technology. It is especially important that teachers having a strong engineering orientation also acquire pedagogical knowledge on issues such as fostering independent learning, creativity, peer learning and reflective practice in the technological classroom.

  16. Teaching Engineering Statistics with Technology, Group Learning, Contextual Projects, Simulation Models and Student Presentations

    Science.gov (United States)

    Romeu, Jorge Luis

    2008-01-01

    This article discusses our teaching approach in graduate level Engineering Statistics. It is based on the use of modern technology, learning groups, contextual projects, simulation models, and statistical and simulation software to entice student motivation. The use of technology to facilitate group projects and presentations, and to generate,…

  17. The AECT HistoryMakers Project: Conversations with Leaders in Educational Technology

    Science.gov (United States)

    Lockee, Barbara B.; Song, Kibong; Li, Wei

    2014-01-01

    The early beginnings and evolution of the field of educational technology (ET) have been documented by various scholars in the field. Recently, another form of historical documentation has been undertaken through a project of the Association for Educational Communications and Technology (AECT). The AECT HistoryMakers Project is a collaborative…

  18. Teaching Engineering Statistics with Technology, Group Learning, Contextual Projects, Simulation Models and Student Presentations

    Science.gov (United States)

    Romeu, Jorge Luis

    2008-01-01

    This article discusses our teaching approach in graduate level Engineering Statistics. It is based on the use of modern technology, learning groups, contextual projects, simulation models, and statistical and simulation software to entice student motivation. The use of technology to facilitate group projects and presentations, and to generate,…

  19. An Examination of the Determinants of Top Management Support of Information Technology Projects

    Science.gov (United States)

    Mahoney, Michael L.

    2011-01-01

    Despite compelling evidence that top management support promotes information technology project success, existing research fails to offer insight into the antecedents of top management support of such projects. This gap in the literature is significant since the exploitation of information technology offers organizations unique opportunities for…

  20. Financing Projects That Use Clean-Energy Technologies. An Overview of Barriers and Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, D. P. [New Energy Capital, LLC, Hanover, NH (United States); McKenna, J. J. [Hamilton Clark & Co., Washington, DC (United States); Murphy, L. M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2005-10-01

    This technical paper describes the importance of project financing for clean-energy technology deployment. It describes the key challenges in financing clean-energy technology projects, including technical risks, credit worthiness risk, revenue security risk, market competition, scale and related cost, as well as first-steps to overcome those barriers.

  1. Including information technology project management in the nursing informatics curriculum.

    Science.gov (United States)

    Sockolow, Paulina; Bowles, Kathryn H

    2008-01-01

    Project management is a critical skill for nurse informaticists who are in prominent roles developing and implementing clinical information systems. It should be included in the nursing informatics curriculum, as evidenced by its inclusion in informatics competencies and surveys of important skills for informaticists. The University of Pennsylvania School of Nursing includes project management in two of the four courses in the master's level informatics minor. Course content includes the phases of the project management process; the iterative unified process methodology; and related systems analysis and project management skills. During the introductory course, students learn about the project plan, requirements development, project feasibility, and executive summary documents. In the capstone course, students apply the system development life cycle and project management skills during precepted informatics projects. During this in situ experience, students learn, the preceptors benefit, and the institution better prepares its students for the real world.

  2. Geothermal Reservoir Technology Research Program: Abstracts of selected research projects

    Energy Technology Data Exchange (ETDEWEB)

    Reed, M.J. (ed.)

    1993-03-01

    Research projects are described in the following areas: geothermal exploration, mapping reservoir properties and reservoir monitoring, and well testing, simulation, and predicting reservoir performance. The objectives, technical approach, and project status of each project are presented. The background, research results, and future plans for each project are discussed. The names, addresses, and telephone and telefax numbers are given for the DOE program manager and the principal investigators. (MHR)

  3. CERN Scientific Book Fair 2008

    CERN Document Server

    DSU Unit

    2008-01-01

    The CERN Bookshop and CERN Library invite you to attend the 2008 CERN Book Fair 2008, a three-day scientific book festival offering you the opportunity to meet key publishers and electronic book suppliers and to browse and purchase books at significant discounts. Some ten companies will be participating and will bring with them a selection of titles in physics, technology, mathematics, engineering and popular science. There will also be a number of tie-in events intended to give you an insight into the writing and publishing process from authors within our own community. Come along and meet the authors, discuss your book ideas with the publishers’ representatives or simply browse the books on offer. The Fair will take place in Building 500 in the area near the Main Auditorium, and special presentations (as detailed below) will be held in rooms nearby or in the Library. Participating publishers and book traders include: Cambridge ...

  4. New technologies for DNA analysis – a review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J.; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Reste, Le Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F.; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D.; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N.; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; Helvoort, van Joop M.L.M.; Zaag, van der Pieter J.; Tegenfeldt, Jonas O.; Brookes, Anthony J.; Mir, Kalim; Nilsson, Mats; Willcocks, James P.; Gut, Ivo G.

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and deve

  5. New Technologies for DNA analysis-A review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Le Reste, Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; van Helvoort, Joop M L M; van der Zaag, Pieter J; Tegenfeldt, Jonas O; Brookes, Anthony J; Mir, Kalim; Nilsson, Mats; Willcocks, Spike; Gut, Ivo G

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and deve

  6. Technological and regulatory aspects of quality management during the life cycle of investment and construction projects

    OpenAIRE

    Kropyvko Serhii Maksymovych

    2016-01-01

    The division of the life cycle of investment and construction projects in four phases, based on their technological features, is proposed in the article. Regulatory aspects of quality management during each phase of the life cycle of investment and construction projects are analyzed. The model of quality management during the phases of the life cycle of investment and construction project is developed.

  7. Success Rates by Software Development Methodology in Information Technology Project Management: A Quantitative Analysis

    Science.gov (United States)

    Wright, Gerald P.

    2013-01-01

    Despite over half a century of Project Management research, project success rates are still too low. Organizations spend a tremendous amount of valuable resources on Information Technology projects and seek to maximize the utility gained from their efforts. The author investigated the impact of software development methodology choice on ten…

  8. The Effects of the Project Champion's Leadership Style on Global Information Technology User Acceptance and Use

    Science.gov (United States)

    Ekiko, Mbong C.

    2014-01-01

    The research problem was the lack of knowledge about the effect of leadership style of the project champion on global information technology (IT) project outcomes, resulting in a high failure rate of IT projects accompanied by significant waste of resources. The purpose of this quantitative, nonexperimental study was to evaluate the relationship…

  9. Harnessing the Power of Technologies to Manage Collaborative e-Learning Projects in Dispersed Environments

    Science.gov (United States)

    Gosper, Maree Veroncia; McNeill, Margot Anne; Woo, Karen

    2010-01-01

    "The impact of web-based lecture technologies on current and future practice in learning and teaching" was a collaborative project across four Australian universities, funded by the Australian Learning and Teaching Council (ALTC). The project was both exploratory and developmental in nature and according to the project's external…

  10. New Technologies for DNA analysis-A review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Le Reste, Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; van Helvoort, Joop M L M; van der Zaag, Pieter J; Tegenfeldt, Jonas O; Brookes, Anthony J; Mir, Kalim; Nilsson, Mats; Willcocks, Spike; Gut, Ivo G

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and deve

  11. New technologies for DNA analysis – a review of the READNA Project

    NARCIS (Netherlands)

    McGinn, Steven; Bauer, David; Brefort, Thomas; Dong, Liqin; El-Sagheer, Afaf; Elsharawy, Abdou; Evans, Geraint; Falk-Sörqvist, Elin; Forster, Michael; Fredriksson, Simon; Freeman, Peter; Freitag, Camilla; Fritzsche, Joachim; Gibson, Spencer; Gullberg, Mats; Gut, Marta; Heath, Simon; Heath-Brun, Isabelle; Heron, Andrew J.; Hohlbein, Johannes; Ke, Rongqin; Lancaster, Owen; Reste, Le Ludovic; Maglia, Giovanni; Marie, Rodolphe; Mauger, Florence; Mertes, Florian; Mignardi, Marco; Moens, Lotte; Oostmeijer, Jelle; Out, Ruud; Pedersen, Jonas Nyvold; Persson, Fredrik; Picaud, Vincent; Rotem, Dvir; Schracke, Nadine; Sengenes, Jennifer; Stähler, Peer F.; Stade, Björn; Stoddart, David; Teng, Xia; Veal, Colin D.; Zahra, Nathalie; Bayley, Hagan; Beier, Markus; Brown, Tom; Dekker, Cees; Ekström, Björn; Flyvbjerg, Henrik; Franke, Andre; Guenther, Simone; Kapanidis, Achillefs N.; Kaye, Jane; Kristensen, Anders; Lehrach, Hans; Mangion, Jonathan; Sauer, Sascha; Schyns, Emile; Tost, Jörg; Helvoort, van Joop M.L.M.; Zaag, van der Pieter J.; Tegenfeldt, Jonas O.; Brookes, Anthony J.; Mir, Kalim; Nilsson, Mats; Willcocks, James P.; Gut, Ivo G.

    2016-01-01

    The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 4 1/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and deve

  12. Success Rates by Software Development Methodology in Information Technology Project Management: A Quantitative Analysis

    Science.gov (United States)

    Wright, Gerald P.

    2013-01-01

    Despite over half a century of Project Management research, project success rates are still too low. Organizations spend a tremendous amount of valuable resources on Information Technology projects and seek to maximize the utility gained from their efforts. The author investigated the impact of software development methodology choice on ten…

  13. New business opportunity: Green field project with new technology

    Directory of Open Access Journals (Sweden)

    Lee Seung Jae

    2014-06-01

    Full Text Available Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation

  14. New business opportunity: Green field project with new technology

    Science.gov (United States)

    Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

    2014-06-01

    Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

  15. Keynote presentation: Project Management, Technology and Evolving Work Processes

    DEFF Research Database (Denmark)

    Kampf, Constance Elizabeth

    Bridging the classroom and workplace is a challenge in the Project Management classroom because students rarely have the opportunity or the experience needed to head up large projects. So how can instructors present the opportunity to develop skills and gain experience needed to understand project...... management in a classroom setting? To begin to answer this question, the presentation describes three key strategies used in a Project Management course developed from a communications perspective in the International Bachelor Program in Marketing and Management Communication, Business & Social Sciences......, Aarhus University. First, this Project Management course involves continual, ongoing development through working with real clients. To learn about project management from a communications perspective, learners were asked to work in teams for project conception and planning. To communicate with the client...

  16. The Road to Stress-Free Science Fairs

    Science.gov (United States)

    Carrier, Sarah J.

    2006-01-01

    While few disagree that science fair projects have great potential for student learning, the preparation and execution of projects can be stressful for teachers, students, and parents alike. While working as a fourth-grade teacher, the author's goal was to provide students with a science fair experience minus the pressure of trying to figure out…

  17. Novel High Pressure Pump-on-a-Chip Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc proposes to develop a novel high pressure "pump-on-a-chip" and "valve-on-a-chip" microfluidic technology for NASA planetary science...

  18. Enabling Technologies for Fabrication of Large Area Flexible Antennas Project

    Data.gov (United States)

    National Aeronautics and Space Administration — MesoScribe Technologies, a high tech start-up from SUNY-Stony Brook, proposes to apply a breakthrough new direct writing technology to meet the objectives set-forth...

  19. Novel High Pressure Pump-on-a-Chip Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HJ Science & Technology, Inc. proposes to develop a novel high pressure "pump-on-a-chip" (HPPOC) technology capable of generating high pressure and flow rate on...

  20. Usable optimistic fair exchange

    OpenAIRE

    Küpçü, Alptekin; Lysyanskaya, A.

    2012-01-01

    Fairly exchanging digital content is an everyday problem. It has been shown that fair exchange cannot be achieved without a trusted third party (called the Arbiter). Yet, even with a trusted party, it is still non-trivial to come up with an efficient solution, especially one that can be used in a p2p file sharing system with a high volume of data exchanged. We provide an efficient optimistic fair exchange mechanism for bartering digital files, where receiving a payment in return for a file (b...

  1. Fairness is intuitive

    DEFF Research Database (Denmark)

    Cappelen, Alexander W.; Panton, Ulrik Haagen; Tungodden, Bertil

    2016-01-01

    In this paper we provide new evidence showing that fair behavior is intuitive to most people. We find a strong association between a short response time and fair behavior in the dictator game. This association is robust to controls that take account of the fact that response time might be affected...... by the decision-maker’s cognitive ability and swiftness. The experiment was conducted with a large and heterogeneous sample recruited from the general population in Denmark. We find a striking similarity in the association between response time and fair behavior across groups in the society, which suggests...

  2. Fairness is intuitive

    DEFF Research Database (Denmark)

    Cappelen, Alexander W.; Panton, Ulrik Haagen; Tungodden, Bertil

    2016-01-01

    In this paper we provide new evidence showing that fair behavior is intuitive to most people. We find a strong association between a short response time and fair behavior in the dictator game. This association is robust to controls that take account of the fact that response time might be affected...... by the decision-maker’s cognitive ability and swiftness. The experiment was conducted with a large and heterogeneous sample recruited from the general population in Denmark. We find a striking similarity in the association between response time and fair behavior across groups in the society, which suggests...

  3. Fairness in society

    CERN Document Server

    Flomenbom, Ophir

    2011-01-01

    Models that explain the economical and political realities of nowadays societies should help all the world's citizens. Yet, the last four years showed that the current models are missing. Here we develop a dynamical society-deciders model showing that the long lasting economical stress can be solved when increasing fairness in nations. fairness is computed for each nation using indicators from economy and politics. Rather than austerity versus spending, the dynamical model suggests that solving crises in western societies is possible with regulations that reduce the stability of the deciders, while shifting wealth in the direction of the people. This shall increase the dynamics among socio-economic classes, further increasing fairness.

  4. Physics at FAIR

    Energy Technology Data Exchange (ETDEWEB)

    Chattopadhyay, Subhasis

    2014-11-15

    The Facility for Antiproton and Ion Research (FAIR) is under construction at Darmstadt, Germany. It will deliver high intensity beams of ions and antiprotons for experiments in the fields of atomic physics, plasma physics, nuclear physics, hadron physics, nuclear matter physics, material physics and biophysics. One of the scientific pillars of FAIR is the Compressed Baryonic Matter (CBM) experiment which is designed for the study of high density nuclear matter as it exists in the core of neutron stars. In this article the scientific program of FAIR will be reviewed with emphasis on the CBM experiment.

  5. Technological Innovation Projects: Proposal For an Integrative Model Between Project Management and Knowledge Management in a Customer-Supplier Perspective

    Directory of Open Access Journals (Sweden)

    Edval da Silva Tavares

    2014-10-01

    Full Text Available In face of strong competition, companies in Brazil have increased their financial investments in automation, offering new products and services and reducing operating costs. These companies are focusing their efforts on core competencies and, therefore, they often lack the internal expertise to implement new projects, especially those that bring technological innovation. For this reason, we use the processes of outsourcing or subcontracting to help implement such projects. The unit of analysis in this study is the project and the object of the study to analyze the process of knowledge transfer from a provider to a customer during the duration of the project, which involves new technologies. The main motivation of this work is to address the acquisition and retention of new knowledge related to projects designed for business customers. We have developed a study of three cases of multiple financial firms that buy new technologies and two suppliers of information technology. As a practical result, a management model of knowledge transfer and retention of knowledge in client companies is proposed and incorporated into project management.

  6. The Carnegie H.A.T. Project--History and Technology.

    Science.gov (United States)

    Laskey, Sue

    1991-01-01

    Describes the History and Technology Project (HAT) at a model technology school. Offers suggestions of suitable hardware and software, and ideas for funding. Emphasizes the goal of integrating technology into all levels of history and social science. Calls for increasing teacher-student interaction and restructuring teaching methods to reach all…

  7. How Undergraduate Students Use Social Media Technologies to Support Group Project Work

    Science.gov (United States)

    McAliney, Peter J.

    2013-01-01

    Technology continues to evolve and become accessible to students in higher education. Concurrently, teamwork has become an important skill in academia and the workplace and students have adopted established technologies to support their learning in both individual and team project work. Given the emergence of social media technologies, I examined…

  8. How Undergraduate Students Use Social Media Technologies to Support Group Project Work

    Science.gov (United States)

    McAliney, Peter J.

    2013-01-01

    Technology continues to evolve and become accessible to students in higher education. Concurrently, teamwork has become an important skill in academia and the workplace and students have adopted established technologies to support their learning in both individual and team project work. Given the emergence of social media technologies, I examined…

  9. Next Slide Please: The Magical, Scientific and Corporate Discourses of Visual Projection Technologies

    Science.gov (United States)

    Eisenhauer, Jennifer F.

    2006-01-01

    This article examines the cultural history of slide projection technologies by focusing upon how such technologies acquire cultural meaning. The meanings acquired by these technologies emerge in areas as diverse as public and domestic entertainment, religion, science, and education. I identify three important discursive shifts impacting the…

  10. Factors influencing the societal acceptance of new energy technologies. Meta-analysis of recent European projects

    Energy Technology Data Exchange (ETDEWEB)

    Poti, B.; Difiore, M. [Consiglio Nazionale delle Ricerche, Rome (Italy); Brohmann, B.; Daniels, A.; Fritsche, U.; Huenecke, K. [Oeko-Institut, Darmstadt (Germany); Heiskanen, E. [National Consumer Research Centre, Helsinki (Finland); Raven, R.P.J.M.; Mourik, R.; Feenstra, C.F.J.; Willemse, R. [ECN Policy Studies, Petten (Netherlands); Hodson, M. [Centre for Sustainable Urban and Regional Futures SURF, University of Salford, Manchester (United Kingdom); Alcantud Torrent, A.; Schaefer, B. [Ecoinstitut Barcelona, Barcelona (Spain); Farkas, B.; Fucsko, J. [Hungarian Environmental Economics Centre MAKK, Budapest (Hungary); Jolivet, E. [IAE Toulouse, Toulouse (France); Maack, M.H.; Matschoss, K. [Icelandic New Energy INE, Reykjavik (Iceland); Oniszk-Poplawska, A. [Institute for Renewable Energy IEO, Warszawa (Poland); Prasad, G. [Energy Research Centre ERC, University of Cape Town, Cape Town (South Africa)

    2008-03-15

    Within this report an analysis is made of 27 case studies of historical and recent new energy technologies in different European regions and South Africa. The analysis focuses on the societal acceptance in these projects in order to identify determinants of success and failure. A wide diversity of technologies is discussed including hydrogen, CO2 capture and storage, biomass, solar and wind energy technologies.

  11. Using Project Portfolio Management in a Junior Enterprise Technology

    Directory of Open Access Journals (Sweden)

    RIBEIRO, D. M.

    2011-06-01

    Full Text Available Junior Enterprises have their own particularities in managing of their projects. Scarcity of resources and lack of experience of its members are critics and typical factors in the daily life of these companies. However, these and other variables such as the time for return on investment, project complexity and runtime of the project, must be taken into consideration in the prioritization of the outstanding portfolio projects to maximize desired outcomes. The Portfolio Management aims to provide the company a better allocation of resources in an environment with multiple projects going simultaneously. The model proposed here seeks a link between projects and organizational strategy. In this Paper also are presented the results of applying the model on Upe consultoria JR.

  12. On fairness and randomness

    DEFF Research Database (Denmark)

    Jaeger, Manfred

    2009-01-01

    We investigate the relation between the behavior of non-deterministic systems under fairness constraints, and the behavior of probabilistic systems. To this end, first a framework based on computable stopping strategies is developed that provides a common foundation for describing both fair...... and probabilistic behavior. On the basis of stopping strategies it is then shown that fair behavior corresponds in a precise sense to random behavior in the sense of Martin-Löf's definition of randomness. We view probabilistic systems as concrete implementations of more abstract non-deterministic systems. Under...... this perspective the question is investigated what probabilistic properties are needed in such an implementation to guarantee (with probability one) certain required fairness properties in the behavior of the probabilistic system. Generalizing earlier concepts of ε -bounded transition probabilities, we introduce...

  13. Is Equality Fair?

    Directory of Open Access Journals (Sweden)

    Arthur Tarasov

    2015-11-01

    Full Text Available This paper attempts to answer the question whether people consider decisions that lead to equal outcomes fair. I find that this is not always the case. In an experiment where subjects are given equal opportunities to choose how to divide money between each other in a two-player game, any strategy is perceived to be fair more than half the time, including the profit-maximizing strategy. The equal divisions that lead to equal outcomes are sometimes considered unfair by both players. Moreover, players frequently punished the others, whose decisions led to equal outcomes. I hypothesize that such punishments occur because people have different conceptions of what a fair outcome and fair punishment are

  14. Technology projects for characterization--monitoring of volatile organic compounds (VOCs)

    Energy Technology Data Exchange (ETDEWEB)

    Junk, G.A.; Haas, W.J. Jr.

    1992-07-01

    One hundred thirty technology project titles related to the characterization of volatile organic compounds (VOCs) at an arid site are listed alphabetically by first contact person in a master compilation that includes phone numbers, addresses, keywords, and short descriptions. Separate tables are presented for 62 field-demonstrated, 36 laboratory-demonstrated, and 35 developing technology projects. The technology projects in each of these three categories are also prioritized in separate summary tables. Additional tables are presented for a number of other categorizations of the technology projects: In Situ; Fiberoptic; Mass Spectrometer; Optical Spectroscopy; Raman or SERS; Ion Mobility or Acoustic; Associated; and Commercial. Four lists of contact person names are provided so details concerning the projects that deal with sampling, and VOCs in gases, waters, and soils (sediments) can be obtained. Finally, seven wide-ranging conclusions based on observations and experiences during this work are presented.

  15. Theme of Vanity Fair

    Institute of Scientific and Technical Information of China (English)

    祝荣玲

    2008-01-01

    1.1The Theme:A Novel without a Hero There is one clear,overarching theme in Vanity Fair:A Novel without a Hero,and Thackeray telegraphs it in his title and subtitle.In the pages of Vanity Fair,all is vanity and all are vain.Some are more vain-more obsessed with self and with the ephemeral treasures of social position and money-than others,

  16. Northwest Open Automated Demand Response Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann

    2009-08-01

    Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) performed a technology demonstration and evaluation for Bonneville Power Administration (BPA) in Seattle City Light's (SCL) service territory. This report summarizes the process and results of deploying open automated demand response (OpenADR) in Seattle area with winter morning peaking commercial buildings. The field tests were designed to evaluate the feasibility of deploying fully automated demand response (DR) in four to six sites in the winter and the savings from various building systems. The project started in November of 2008 and lasted 6 months. The methodology for the study included site recruitment, control strategy development, automation system deployment and enhancements, and evaluation of sites participation in DR test events. LBNL subcontracted McKinstry and Akuacom for this project. McKinstry assisted with recruitment, site survey collection, strategy development and overall participant and control vendor management. Akuacom established a new server and enhanced its operations to allow for scheduling winter morning day-of and day-ahead events. Each site signed a Memorandum of Agreement with SCL. SCL offered each site $3,000 for agreeing to participate in the study and an additional $1,000 for each event they participated. Each facility and their control vendor worked with LBNL and McKinstry to select and implement control strategies for DR and developed their automation based on the existing Internet connectivity and building control system. Once the DR strategies were programmed, McKinstry commissioned them before actual test events. McKinstry worked with LBNL to identify control points that can be archived at each facility. For each site LBNL collected meter data and trend logs from the energy management and control system. The communication system allowed the sites to receive day-ahead as well as day-of DR test event signals. Measurement of DR was

  17. A Proposal to Manage Lessons Learned in Projects: Web 2.0 Technologies to Promote Innovation

    Directory of Open Access Journals (Sweden)

    Marcirio Silveira Chaves

    2014-06-01

    Full Text Available The web 2.0 is transforming the project management in organizations by improving communication and collaboration. The new generation of web-based collaborative tools provides much better experience than the traditional software package allowing document sharing, integrated task tracking, enforcing team processes and agile planning. Despite of the indubitable benefits brought by web 2.0, the use of these technologies to promote knowledge management remains unexplored. For many project managers to obtain and integrate information from different tools of previous similar projects in global organizations remains a challenge. This theoretical paper presents a proposal that suggests an innovation in the knowledge management area applying web 2.0 technologies. The main goal is to provide an integrated vision of a set of technologies that could be used by organizations in order to promote better management of lessons learned. The proposal includes the lessons learned processes (e.g. capture, share and dissemination, the process-based (e.g. project review and after action review and documentation-based (e.g. micro article and learning histories methods. Results show how web 2.0 technologies can help project managers and team project to cope with the main lessons learned processes and methods to learn from experience. Moreover, recommendations are made for the effective use of web 2.0 components promoting innovation and supporting lessons learned management in projects.Keywords: Project management; Lessons learned processes; lessons learned methods; project learning; web 2.0 technologies; innovation.

  18. Los Alamos National Laboratory Tritium Technology Deployments Large Scale Demonstration and Deployment Project

    Energy Technology Data Exchange (ETDEWEB)

    McFee, J.; Blauvelt, D.; Stallings, E.; Willms, S.

    2002-02-26

    This paper describes the organization, planning and initial implementation of a DOE OST program to deploy proven, cost effective technologies into D&D programs throughout the complex. The primary intent is to accelerate closure of the projects thereby saving considerable funds and at the same time being protective of worker health and the environment. Most of the technologies in the ''toolkit'' for this program have been demonstrated at a DOE site as part of a Large Scale Demonstration and Deployment Project (LSDDP). The Mound Tritium D&D LSDDP served as the base program for the technologies being deployed in this project but other LSDDP demonstrated technologies or ready-for-use commercial technologies will also be considered. The project team will evaluate needs provided by site D&D project managers, match technologies against those needs and rank deployments using a criteria listing. After selecting deployments the project will purchase the equipment and provide a deployment engineer to facilitate the technology implementation. Other cost associated with the use of the technology will be borne by the site including operating staff, safety and health reviews etc. A cost and performance report will be prepared following the deployment to document the results.

  19. Interdisciplinary Project-Based Learning: Technology for Improving Student Cognition

    Science.gov (United States)

    Stozhko, Natalia; Bortnik, Boris; Mironova, Ludmila; Tchernysheva, Albina; Podshivalova, Ekaterina

    2015-01-01

    The article studies a way of enhancing student cognition by using interdisciplinary project-based learning (IPBL) in a higher education institution. IPBL is a creative pedagogic approach allowing students of one area of specialisation to develop projects for students with different academic profiles. The application of this approach in the Ural…

  20. Avionics Technology Contract Project Report Phase I with Research Findings.

    Science.gov (United States)

    Sappe', Hoyt; Squires, Shiela S.

    This document reports on Phase I of a project that examined the occupation of avionics technician, established appropriate committees, and conducted task verification. Results of this phase provide the basic information required to develop the program standards and to guide and set up the committee structure to guide the project. Section 1…

  1. Final Project Summary Report Bechtel Nevada and Fiberchem Environmental, Inc., Cooperative Research and Technology Development Project

    Energy Technology Data Exchange (ETDEWEB)

    R. J. Pollina

    1999-04-01

    This is a report summarizing work on a small project dedicated to adapting a new chemical sensing platform for the US Department of Energy and its customers. At the same time and in the spirit of technology transfer, FCI Environmental, Inc., would receive technical support in the form of expertise from the US Department of Energy to assist in developing this product. The sensor is a hybrid integrated-circuit, optical waveguide, chemical sensor that is patented by FCI Environmental, Inc., and manufactured under license by Texas Instruments, Inc. A down-hole penetrometer probe was designed for use in hot, 60 C, hydrocarbon-saturated, saline environment at a depth of 200 feet. The probe design includes three chemical sensing, hybrid integrated-circuits with chemical reference and measurement channels, a water seal, output electronics, and a removable measurement head for replacement in the field. A hand-held chemical detector prototype--containing a hybrid integrated-circuit chemical sensor with reference channel, user alarm, and level display--was designed and constructed, and a software interface developed to operate the hand-held sensor interfaced with a laboratory data acquisition system.

  2. Science Teachers' Views about the Science Fair at Primary Education Level

    Science.gov (United States)

    Tortop, Hasan Said

    2013-01-01

    Science fair is an environment where students present their scientific research projects. Opinions of science teachers who participated as a mentor in science fair are important for determining of the science fair quality and its contribution of science education. The aim of study was to determine science teachers' views about the science fair at…

  3. The Impact of Involvement in a Science Fair on Seventh Grade Students.

    Science.gov (United States)

    Yasar, Senay; Baker, Dale

    Current research shows that the number of science fairs and science fair participants is increasing. However, other than the growth of participant numbers, there is very little research investigating the benefits of these science fairs and assessing whether science fair projects are worth the time, effort, and money spent on them. The purpose of…

  4. Advanced Technology MEMS-based Acoustic Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Interdisciplinary Consulting Corporation proposes a technological advancement of current state-of-the-art acoustic energy harvester for harsh environment...

  5. Advanced Multimission Operations Systems Tech (AMMOS) Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — AMMOS Technology tasks include: - Enhance mission planning and sequence generation tools with constraint based automated planning and scheduling techniques to enable...

  6. Evaluation of Representative Smart Grid Investment Grant Project Technologies: Distributed Generation

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Ruchi; Vyakaranam, Bharat GNVSR

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of addition of renewable resources- solar and wind in the distribution system as deployed in the SGIG projects.

  7. Review of EOR (enhanced oil recovery) project trends and thermal EOR (enhanced oil recovery) technology

    Energy Technology Data Exchange (ETDEWEB)

    Pautz, J. F.; Sarathi, P.; Thomas, R.

    1990-03-01

    Information on United States (US) enhanced oil recovery (EOR) projects is analyzed to discern trends in applications of EOR technologies. This work is based on an evaluation of current literature and analysis of the Department of Energy (DOE) EOR project data base which contains information on over 1,300 projects. Three-quarters of current US oil production attributed to EOR is derived from thermal EOR processes (TEOR). Changes in the technology of TEOR since the 1984 Enhanced Oil Recovery'' study by the National Petroleum Council (NPC) are reviewed in terms of the current applied technology and reported research. 87 refs., 4 figs., 20 tabs.

  8. High Performance Fairness Algorithm for Resilient Packet Ring

    Institute of Scientific and Technical Information of China (English)

    Kangbok Lee; Sangyeoun Lee; Heyungsub Lee; Hyeongho Lee

    2003-01-01

    Resilient Packet Ring (RPR) is MAN technology with two counter-rotating rings that multiple stations share the bandwidth. The stations on ring must negotiate the allowed rate that they can transmit fairness eligible traffic based on the total amount of uncommitted bandwidth. RPR draft employs distributed bandwidth control algorithm in order to assure global fairness. In this paper, we suggest a new fairness control algorithm termed Congestion Distributed Fairness Algorithm (CDFA) that exhibits better performance than RPR fairness algorithm. It attributes all stations on ring to have a regular transmission rate even though heavy congestion occurs in a station.

  9. Large-scale decontamination and decommissioning technology demonstration project at a former uranium metal production facility

    Energy Technology Data Exchange (ETDEWEB)

    Martineit, R.A.; Borgman, T.D.; Peters, M.S.; Stebbins, L.L. [and others

    1997-03-05

    The Department of Energy`s (DOE) Office of Science and Technology Decontamination and Decommissioning (D&D) Focus Area, led by the Federal Energy Technology Center, has been charged with improving upon baseline D&D technologies with the goal of demonstrating and validating more cost-effective and safer technologies to characterize, deactivate, survey, decontaminate, dismantle, and dispose of surplus structures, buildings, and their contents at DOE sites. The D&D Focus Area`s approach to verifying the benefits of the improved D&D technologies is to use them in large-scale technology demonstration (LSTD) projects at several DOE sites. The Fernald Environmental Management Project (FEMP) was selected to host one of the first three LSTD`s awarded by the D&D Focus Area. The FEMP is a DOE facility near Cincinnati, Ohio, that was formerly engaged in the production of high quality uranium metal. The FEMP is a Superfund site which has completed its RUFS process and is currently undergoing environmental restoration. With the FEMP`s selection to host an LSTD, the FEMP was immediately faced with some challenges. The primary challenge was that this LSTD was to be integrated into the FEMP`s Plant 1 D&D Project which was an ongoing D&D Project for which a firm fixed price contract had been issued to the D&D Contractor. Thus, interferences with the baseline D&D project could have significant financial implications. Other challenges include defining and selecting meaningful technology demonstrations, finding/selecting technology providers, and integrating the technology into the baseline D&D project. To date, twelve technologies have been selected, and six have been demonstrated. The technology demonstrations have yielded a high proportion of {open_quotes}winners.{close_quotes} All demonstrated, technologies will be evaluated for incorporation into the FEMP`s baseline D&D strategy.

  10. Anchored Instruction in Preservice Educational Technology Classes: A Research Project.

    Science.gov (United States)

    Bauer, Jeffrey W.

    This study examined the effectiveness of the anchored instruction (i.e., using a theme or anchor around which various learning activities take place) approach in preparing preservice teachers to integrate technology. Participants were 48 students enrolled in the three sections of a preservice educational technology class during the summer of 1997.…

  11. Examining the Relationship between Technology Leadership Behaviors and Project Success

    Science.gov (United States)

    Bolman, David B.

    2012-01-01

    Organizations invest substantial resources into technology initiatives intended to generate advantages associated with improved use of human resources, increased operational efficiencies, and creating new capacities within processes and products; however, there is limited knowledge regarding how technology leadership behaviors influence project…

  12. FACTORS EFFECTING TECHNOLOGY ACQUISITION DECISIONS IN NATIONAL DEFENSE PROJECTS

    Directory of Open Access Journals (Sweden)

    Gökhan ASTAN

    2015-04-01

    Full Text Available “Defense Industry” (DI not only strengthens the military power of a country, but also effects other fields of technology and economy positively and enables countries to be much more powerful in terms of their competitiveness in technology and knowledge instead of merely being a follower and a continuous customer. If a state seeks to have high-tech and capable DI the only foundation is to create a national environment which is managed based on a systematic ”Technology Management” philosophy and well-defined “Acquisition” process. With already reduced resources, it is crucial to spend money for the most needed and right technology. Consequently, the focus of this study is on the “Acquisition" and "Technology Transfer" (TT concepts and approaches. As such the different TT methods are compared and their advantages and disadvantages discussed. In the last part of the study, DI is described and assessed in terms of the TT methods.

  13. Adaptive Deployable Entry and Placement Technology (ADEPT) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The ADEPT Project is developing a mechanically deployable low-ballistic coefficient aeroshell entry system to perform entry descent landing (EDL) functions for...

  14. Technology Base Research Project for electrochemical energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K. (ed.)

    1991-06-01

    This report is an executive summary of major project goals and descriptions for electrochemical energy storage. Exploratory research, applied science research, air systems research, milestones, and management activities are a few of the topics discussed. (JL)

  15. Demonstration of Submillimeter Astrophysics Technology at Caltech Submillimeter Observatory Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The following are the objectives of this project:(1) Demonstration of 1600-element Kinetic Inductance Detector (KID) imaging array operating at 350 micron with near...

  16. Fast GC for Space Applications Based on PIES Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase II project is aimed at the development of an analytical instrument which combines the advantages of fast gas chromatography (GC) and a detector that...

  17. GIS Technology: Resource and Habitability Assessment Tool Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This is a one-year project to apply a GIS analysis tool to new orbital data for lunar resource assessment and martian habitability identification.  We used...

  18. Geometry Projects Linking Mathematics, Literacy, Art, and Technology.

    Science.gov (United States)

    Little, Catherine

    1999-01-01

    Describes a geometry project for students using the Geometer's Sketchpad. Students choose from constructing an instruction manual, writing and illustrating a children's picture book, or creating a piece of art in the Escher style. (ASK)

  19. Operation algorithm of the information system of improving organizational and technological reliability of construction projects using energy efficient technologies

    Directory of Open Access Journals (Sweden)

    Ginzburg Aleksandr Vital’evich

    2016-10-01

    Full Text Available The main source for the development of construction projects with energy-efficient technologies in use is investments. The traditional approaches of risk management: insurance, diversification and redundancy only raise the cost of the construction project, which has a negative impact on the investor’s decision to invest. In order to solve this problem an information system has been developed, which is based on the principle of insightful analysis of the potential “pure” risks and a list of recommendations of risk management. This tool allows identifying all the weaknesses of a construction project, improving the organizational and technological reliability, and imparting an understanding to the investor / a customer of the resources required for the project implementation.

  20. Magnetic levitation technology and its applications in exploration projects

    Science.gov (United States)

    Shu, Quan-Sheng; Cheng, Guangfeng; Susta, Joseph T.; Hull, John R.; Fesmire, James E.; Augustanowicz, Stan D.; Demko, Jonathan A.; Werfel, Frank N.

    2006-02-01

    An energy efficient cryogenic transfer line with magnetic suspension has been prototyped and cryogenically tested. The prototype transfer line exhibits cryogen saving potential of 30-35% in its suspension state as compared to its solid support state. Key technologies developed include novel magnetic levitation using multiple-pole high temperature superconductor (HTS) and rare earth permanent-magnet (PM) elements and a smart cryogenic actuator as the warm support structure. These technologies have vast applications in extremely low thermal leak cryogenic storage/delivery containers, superconducting magnetic bearings, smart thermal switches, etc. This paper reviews the development work and discusses future applications of established technologies.

  1. FACTORS EFFECTING TECHNOLOGY ACQUISITION DECISIONS IN NATIONAL DEFENSE PROJECTS

    OpenAIRE

    2015-01-01

    “Defense Industry” (DI) not only strengthens the military power of a country, but also effects other fields of technology and economy positively and enables countries to be much more powerful in terms of their competitiveness in technology and knowledge instead of merely being a follower and a continuous customer. If a state seeks to have high-tech and capable DI the only foundation is to create a national environment which is managed based on a systematic ”Technology Management” philosophy a...

  2. Phase Change Permeation Technology for Environmental Control & Life Support Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project will explore a recent advancement in Phase Change Permeation™ technology to enable improved (1) water recovery from urine/brine for Environmental...

  3. 77 FR 69601 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects

    Science.gov (United States)

    2012-11-20

    ... of the Secretary Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Projects AGENCY: Office of the Deputy Assistant Secretary of Defense (Civilian Personnel Policy) (DASD (CPP)), Department of Defense (DoD). ACTION: Notice of proposed amendment to demonstration...

  4. 76 FR 1923 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2011-01-11

    ... organization's human resources management authorities, policies, and practices must have the flexibility needed... contribution-based compensation system, talent acquisition/retention, and professional human capital planning... Defense Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

  5. Technologies Enabling Exploration of Skylights, Lava Tubes and Caves Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Missions to date have orbited and roved, but sub-planetary worlds elude exploration. This investigation proposes to develop technology for venturing underground and...

  6. Biomedical Monitoring by a Novel Noncontact Radio Frequency Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This technology will be a quantum advance in cardiac monitoring and will be applicable in numerous situations such as for immediate assessment and monitoring of...

  7. Automated Service Discovery using Autonomous Control Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  8. Prototype-Technology Evaluator and Research Aircraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Area-I team has developed and flight tested the unmanned Prototype-Technology Evaluation and Research Aircraft or PTERA ("ptera" being Greek for wing, or...

  9. Lightweight Pump Technology for Advanced Green Monopropellants Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Systima will develop an innovative light weight self-pressurizing pump (SPP) technology to provide a constant-pressure supply of monopropellant to a spacecraft or...

  10. Affordable, Precision Reflector Mold Technology (PDRT08-029) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advances in replication mold technology that reduce material costs, grinding time, and polishing time would enable fabrication of large, precision molds and possibly...

  11. Polymer Matrix Composites using Fused Deposition Modeling Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fused deposition modeling (FDM) is an additive manufacturing technology that allows fabrication of complex three-dimensional geometries layer-by-layer. The goal of...

  12. Novel Polymer Microfluidics Technology for In Situ Planetary Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Los Gatos Research proposes to develop a new polymer based microfluidics technology for NASA planetary science applications. In particular, we will design, build and...

  13. Calibration/Validation Technology for the CO2 Satellite Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We are proposing to develop high altitude CO2 analyzer technology that can be deployed on the research aircraft of NASA's Airborne Science Program (ASP). The...

  14. Health-Enabled Smart Sensor Fusion Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — It has been proven that the combination of smart sensors with embedded metadata and wireless technologies present real opportunities for significant improvements in...

  15. An MMOD Risk Mitigation Technology for Spacecraft TPS Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposed technology uses nitrogen or helium gas and water to prevent structural damage that could lead to loss of vehicle and loss of crew caused by high...

  16. Dalian International Garment Fair

    Institute of Scientific and Technical Information of China (English)

    Bai Yifeng

    2004-01-01

    @@ The 17th Dalian International Garment Fair is a new starting point. In the face of the main development trend of international and domes tic convention and exhibition industry, the fierce competition among the domestic exhibition industry, Dalian International Garment Fair sizes up the situation and the golden opportunity that China will revitalize the Northeast old industrial base and turn Dalian into the international shipping center in Northeast Asia; it takes the new Dalian Convention and Exhibition Center as a turning point. Under the leadership of Dalian Mu-nicipal Party Committee and Dalian municipal government, and under the support and assistance of the sponsors, Dalian International Garment Fair emancipates the mind and plans the future with the viewpoint of scientific development, innovative thinking and practical operation.

  17. Trust, confidence, procedural fairness, outcome fairness, moral conviction, and the acceptance of GM field experiments.

    Science.gov (United States)

    Siegrist, Michael; Connor, Melanie; Keller, Carmen

    2012-08-01

    In 2005, Swiss citizens endorsed a moratorium on gene technology, resulting in the prohibition of the commercial cultivation of genetically modified crops and the growth of genetically modified animals until 2013. However, scientific research was not affected by this moratorium, and in 2008, GMO field experiments were conducted that allowed us to examine the factors that influence their acceptance by the public. In this study, trust and confidence items were analyzed using principal component analysis. The analysis revealed the following three factors: "economy/health and environment" (value similarity based trust), "trust and honesty of industry and scientists" (value similarity based trust), and "competence" (confidence). The results of a regression analysis showed that all the three factors significantly influenced the acceptance of GM field experiments. Furthermore, risk communication scholars have suggested that fairness also plays an important role in the acceptance of environmental hazards. We, therefore, included measures for outcome fairness and procedural fairness in our model. However, the impact of fairness may be moderated by moral conviction. That is, fairness may be significant for people for whom GMO is not an important issue, but not for people for whom GMO is an important issue. The regression analysis showed that, in addition to the trust and confidence factors, moral conviction, outcome fairness, and procedural fairness were significant predictors. The results suggest that the influence of procedural fairness is even stronger for persons having high moral convictions compared with persons having low moral convictions. © 2012 Society for Risk Analysis.

  18. Fairness in Combinatorial Auctioning Systems

    CERN Document Server

    Saini, Megha

    2008-01-01

    One of the Multi-Agent Systems that is widely used by various government agencies, buyers and sellers in a market economy, in such a manner so as to attain optimized resource allocation, is the Combinatorial Auctioning System (CAS). We study another important aspect of resource allocations in CAS, namely fairness. We present two important notions of fairness in CAS, extended fairness and basic fairness. We give an algorithm that works by incorporating a metric to ensure fairness in a CAS that uses the Vickrey-Clark-Groves (VCG) mechanism, and uses an algorithm of Sandholm to achieve optimality. Mathematical formulations are given to represent measures of extended fairness and basic fairness.

  19. SCINTILLA A European project for the development of scintillation detectors and new technologies for nuclear security

    CERN Document Server

    Alemberti, A; Botta, E; De Vita, R; Fanchini, E; Firpo, G

    2014-01-01

    Europe monitors transits using radiation detectors to prevent illicit trafficking of nuclear materials. The SCINTILLA project aims to develop a toolbox of innovative technologies designed to address different usage cases. This article will review the scope, approach, results of the first benchmark campaign and future plans of the SCINTILLA project.

  20. Profiting from empowerment? Investigating dissemination avenues for educational technology content within an emerging market solutions project

    NARCIS (Netherlands)

    P.A. Arora (Payal)

    2005-01-01

    textabstractABSTRACT: The Stills in Sync (SIS) project is a joint initiative of the nonprofit organization PlanetRead and the global information and communication technology (ICT) company Hewlett Packard (HP). The SIS project entails creating a multimedia product designed to enhance literacy in

  1. Becoming Little Scientists: Technologically-Enhanced Project-Based Language Learning

    Science.gov (United States)

    Dooly, Melinda; Sadler, Randall

    2016-01-01

    This article outlines research into innovative language teaching practices that make optimal use of technology and Computer-Mediated Communication (CMC) for an integrated approach to Project-Based Learning. It is based on data compiled during a 10- week language project that employed videoconferencing and "machinima" (short video clips…

  2. Tension awareness of stakeholders in large technology projects : a duality perspective

    NARCIS (Netherlands)

    Boonstra, Albert; van Offenbeek, Marjolein; Vos, Janita F.J.

    2017-01-01

    This paper analyzes the tensions evolving from project management dilemmas and how they relate to stakeholders in large technology projects. The study addresses an organization-wide electronic health record implementation in a large hospital. It adopts a duality lens in exploring whether and how

  3. Virtual Teaming and Collaboration Technology: A Study of Influences on Virtual Project Outcomes

    Science.gov (United States)

    Broils, Gary C.

    2014-01-01

    The purpose of this quantitative correlational study was to explore the relationships between the independent variables, contextual factors for virtual teams and collaboration technology, and the dependent variable, virtual project outcomes. The problem leading to the need for the study is a lower success rate for virtual projects compared to…

  4. 78 FR 34655 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

    Science.gov (United States)

    2013-06-10

    ... of the Secretary Science and Technology Reinvention Laboratory Personnel Management Demonstration... Demonstration Project (75 FR 77380-77447, December 10, 2010). SUMMARY: On December 10, 2010 (75 FR 77380-77447), DoD published a notice of approval of a personnel management demonstration project for eligible...

  5. Tension Awareness of Stakeholders in Large Technology Projects : A Duality Perspective

    NARCIS (Netherlands)

    Boonstra, Albert; van Offenbeek, Marjolein; Vos, Janita F.J.

    2017-01-01

    This article analyzes the tensions evolving from project management dilemmas and how they relate to stakeholders in large technology projects. The study addresses an organization-wide electronic health record implementation in a large hospital. It adopts a duality lens in exploring whether and how

  6. Statistics on Science and Technology in Latin America, Experience with UNESCO Pilot Projects, 1972-1974.

    Science.gov (United States)

    Thebaud, Schiller

    This report examines four UNESCO pilot projects undertaken in 1972 in Brazil, Colombia, Peru, and Uruguay to study the methods used for national statistical surveys of science and technology. The projects specifically addressed the problems of comparing statistics gathered by different methods in different countries. Surveys carried out in Latin…

  7. Profiting from empowerment? Investigating dissemination avenues for educational technology content within an emerging market solutions project

    NARCIS (Netherlands)

    P.A. Arora (Payal)

    2005-01-01

    textabstractABSTRACT: The Stills in Sync (SIS) project is a joint initiative of the nonprofit organization PlanetRead and the global information and communication technology (ICT) company Hewlett Packard (HP). The SIS project entails creating a multimedia product designed to enhance literacy in rura

  8. Virtual Teaming and Collaboration Technology: A Study of Influences on Virtual Project Outcomes

    Science.gov (United States)

    Broils, Gary C.

    2014-01-01

    The purpose of this quantitative correlational study was to explore the relationships between the independent variables, contextual factors for virtual teams and collaboration technology, and the dependent variable, virtual project outcomes. The problem leading to the need for the study is a lower success rate for virtual projects compared to…

  9. Scientific and technological progress and innovation of Three Gorges Project%Scientific and technological progress and innovation of Three Gorges Project

    Institute of Scientific and Technical Information of China (English)

    Zhang Chaoran; Sun Zhiyu

    2011-01-01

    In the design, construction and operation periods of the Three Gorges Project (TGP), great challenges have been met in different fields such as water resources and hydropower project construction, electromechanical equipment manufacture and ecological environment protection. In view of the key techniques and difficulties in the construction period, scientific and technological breakthroughs have been made by the experts and scholars of various fields and a series of innovative achievements are gained, which make the scientific and technological levels in relevant fields improved. Some major innovative achievements in the construction and operation of TGP are enumerated, which are significant for the hydropower project construction and clean energy development in the future in China.

  10. Technological and regulatory aspects of quality management during the life cycle of investment and construction projects

    Directory of Open Access Journals (Sweden)

    Kropyvko Serhii Maksymovych

    2016-12-01

    Full Text Available The division of the life cycle of investment and construction projects in four phases, based on their technological features, is proposed in the article. Regulatory aspects of quality management during each phase of the life cycle of investment and construction projects are analyzed. The model of quality management during the phases of the life cycle of investment and construction project is developed.

  11. Diagnostic framework and health check tool for engineering and technology projects

    Directory of Open Access Journals (Sweden)

    Simon P Philbin

    2014-10-01

    Full Text Available Purpose: Development of a practitioner oriented diagnostic framework and health check tool to support the robust assessment of engineering and technology projects.Design/methodology/approach: The research is based on a literature review that draws together insights on project assessment and critical success factors to establish an integrated systems view of projects. This is extended to allow a comprehensive diagnostic framework to be developed along with a high-level health check tool that can be readily deployed on projects. The utility of the diagnostic framework and health check tool are explored through three illustrative case studies, with two from Canada and one from the United Kingdom. Findings andOriginality/value: The performance of engineering and technology projects can be viewed through a systems perspective and being a function of six sub-systems that are: process, technology, resources, impact, knowledge and culture. The diagnostic framework that is developed through this research integrates these sub-systems to provide a comprehensive assessment methodology for projects, which is linked to existing best practice for project reviews, performance management and maturity models. The case studies provide managerial insights that are related to the diagnostic framework but crucially also position the approach in the context of industrial applications for construction engineering and technology management.Research limitations/implications: The case study approach includes two case studies from the construction and facilities development sector with the third case study from the research and technology sector. Further work is required to investigate the use of the diagnostic framework and health check tool in other sectors.Practical implications: The health check tool will be of practical benefit to new projects managers that require access to a robust and convenient project review methodology for assessing the status and health of a

  12. Towards a Fair Global Economic Regime?

    DEFF Research Database (Denmark)

    Staricco, Juan Ignacio

    levels of generality, offering both case-specific and universal arguments about the Fair Trade system as a whole. Theoretically, the dissertation develops a regulationist framework based on a critical engagement with the French Regulation Approach and the Amsterdam Project in International Political...

  13. 7 CFR 3560.104 - Fair housing.

    Science.gov (United States)

    2010-01-01

    ... plan, the following items must be considered by the borrower: (i) Direction of marketing activities... Housing Marketing Plan. (1) Borrowers with housing projects that have four or more rental units must prepare and maintain an Affirmative Fair Housing Marketing Plan (AFHMP) as defined in 24 CFR part...

  14. A Survey of Technologies Supporting Virtual Project Based Learning

    DEFF Research Database (Denmark)

    Dirckinck-Holmfeld, Lone

    2002-01-01

    for evaluation is proposed where negotiation of meaning, coordination and resource management are identified as the key concepts in virtual project based learning. Three e-learning systems are selected for the survey, Virtual-U, Lotus Learningspace and Lotus Quickplace, as each system offers different strategies...

  15. Industrial Technology Modernization Program. Project 32. Factory Vision. Phase 2

    Science.gov (United States)

    1988-04-01

    400B is through floppy disk media . On the shop floor, a set-up person is responsible for setting up the machines. The set-up person must look at the...million dollars. An additional five millon dollars of projected savings would be associated with the incorporation of the fifth cell for the same ten

  16. So You're Planning a Science Fair: Comments from a Judge

    Science.gov (United States)

    Riechard, Donald E.

    1976-01-01

    After judging and evaluating four science fairs during a two week period, the author moved to put down some thoughts and suggestions. His comments fell into three major categories: 1) purposes of science fairs, 2) types of science fair projects, and 3) judging the projects. (Author/RK)

  17. Study on the Factors Influencing the Level of Innovation in Agricultural Science and Technology Projects

    Institute of Scientific and Technical Information of China (English)

    Jing; SUN; Baofeng; CHEN

    2015-01-01

    This paper carries out a questionnaire survey of persons in charge of the agricultural project in the " Eleventh Five-Year National Support Program" on the level of innovation in projects and the factors influencing innovation. After the linear regression analysis of the survey data,it is found that the factors influencing the innovation in agricultural science and technology projects include the level of innovation in scientific achievements,efficiency of research methods and creation of innovation environment. Through the variance analysis of the level of innovation and its influencing factors related to different innovators,it is found that there are differences in the statistical significance of level of innovation in projects among universities,research institutes,research and extension departments directly under the government,and enterprises; there are no significant differences in the understanding of factors influencing innovation,that is,different innovators basically have the same understanding of factors influencing innovation,but the assessment on level of innovation in projects completed is different to some extent.On this basis,this paper proposes the recommendations for further strengthening the level of innovation in agricultural science and technology projects in order to provide a theoretical reference and practical basis for the project managers to effectively improve the level of agricultural science and technology project management,and enhance the level of innovation in projects.

  18. Exploring the Effects of Technology Overload on the Outcomes of Enterprise Resource Planning (ERP) Implementation Projects

    Science.gov (United States)

    Kates, Earl B.

    2016-01-01

    Despite significant investments made by organizations to implement ERP systems and prior research that explored contributing factors of ERP failure, the ERP implementation success rate continues to remain low in practice. Increased technology usage in the workplace coupled with higher dependency on technology to complete project tasks often leads…

  19. PROJECT W-551 INTERIM PRETREATMENT SYSTEM TECHNOLOGY SELECTION SUMMARY DECISION REPORT AND RECOMMENDATION

    Energy Technology Data Exchange (ETDEWEB)

    CONRAD EA

    2008-08-12

    This report provides the conclusions of the tank farm interim pretreatment technology decision process. It documents the methodology, data, and results of the selection of cross-flow filtration and ion exchange technologies for implementation in project W-551, Interim Pretreatment System. This selection resulted from the evaluation of specific scope criteria using quantitative and qualitative analyses, group workshops, and technical expert personnel.

  20. A Constructivist Stretch: Preservice Teachers Meet Preteens in a Technology-Based Literacy Project.

    Science.gov (United States)

    Bauer, John F.; Anderson, Rebecca S.

    2002-01-01

    Describes a study conducted within a constructivist framework to examine pre-service teachers' development and implementation of a collaborative, technology-based literacy project with 11- and 12-year-old learners. Concludes that the pre-service teachers learned the value of Internet technology, e-mail, and hypermedia applications, but problems…

  1. Current status and future tasks of the Sunshine Project. (Development of new energy technology)

    Energy Technology Data Exchange (ETDEWEB)

    Takada, T.

    1983-01-01

    Since its inception in 1974, the Sunshine Project has involved advances in new energy technology in many areas. The present report covers the principal areas of activity in 1980, examining the development status of solar energy, goethermal energy, coal liquefaction and gasification, hydrogen energy, wind power, ocean thermal energy conversion, etc. Future trends and tasks of new energy technology development are discussed. (In Japanese)

  2. Progress of Project “The Key Technology Research of Passive Shutdown System for CDFR”

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Passive shutdown technology is one of the key technologies to increase safety performance of larger-size sodium-cooled fast reactors. The objective to the project was to develop the preliminary design of the rod on the basis of theoretic analysis of passive shutdown assembly.

  3. Exploring the Effects of Technology Overload on the Outcomes of Enterprise Resource Planning (ERP) Implementation Projects

    Science.gov (United States)

    Kates, Earl B.

    2016-01-01

    Despite significant investments made by organizations to implement ERP systems and prior research that explored contributing factors of ERP failure, the ERP implementation success rate continues to remain low in practice. Increased technology usage in the workplace coupled with higher dependency on technology to complete project tasks often leads…

  4. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  5. A project in support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Ki Jung; Choi, Pyong Hoon; Yi, Ji Ho (and others)

    2005-12-15

    Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing. - Promotion of domestic nuclear energy technology by utilizing nuclear energy informations and computer software developed in the advanced countries. - Establish strategies of international cooperation in an effort to promote our nation's Leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate.

  6. Fair market value: taking a proactive approach.

    Science.gov (United States)

    Romero, Richard A

    2008-04-01

    A valuation report assessing the fair market value of a contractual arrangement should include: A description of the company, entity, or circumstance being valued. Analysis of general economic conditions that are expected to affect the enterprise. Evaluation of economic conditions in the medical services industry. Explanation of the various valuation approaches that were considered. Documentation of key underlying assumptions, including revenue and expense projections, projected profit, and ROI.

  7. Fair Factory Floors

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The number of labor disputes has soared and fairness remains elusive China’s Labor Contract Law, which has been in effect since January 1, 2008, has had significant positive impacts on the labor market, but there are still many difficulties facing workers and employers. In April 2009, Beijing’s Transition Institute conducted labor research in textile

  8. Fair mulighedslighed og sundhed

    DEFF Research Database (Denmark)

    Nielsen, Lasse

    2014-01-01

    Når vi skal diskutere de normative spørgsmål, der rejser sig i forbindelse med ulighed i sundhed, er Norman Daniels’ teori om retfærdig sundhed central. Teoriens omdrejningspunkt er en udvidelse af Rawls’ princip om fair mulighedslighed til også at omfatte sundhed, og den er uden tvivl blandt de...

  9. A Fair Production

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Traditional markets are returning to big cities in China,but with a new twist:They’re organic AFTER participating in Beijing’s"Country Fair"in March,a netizen going by the name"north slope"wrote in his blog,"It’s more like a creative market.

  10. Fair mulighedslighed og sundhed

    DEFF Research Database (Denmark)

    Nielsen, Lasse

    2014-01-01

    Når vi skal diskutere de normative spørgsmål, der rejser sig i forbindelse med ulighed i sundhed, er Norman Daniels’ teori om retfærdig sundhed central. Teoriens omdrejningspunkt er en udvidelse af Rawls’ princip om fair mulighedslighed til også at omfatte sundhed, og den er uden tvivl blandt de...

  11. Contract law as fairness

    NARCIS (Netherlands)

    J. Klijnsma

    2015-01-01

    This article examines the implications for contract law of Rawls' theory of justice as fairness. It argues that contract law as an institution is part of the basic structure of society and as such subject to the principles of justice. Discussing the basic structure in relation to contract law is par

  12. The Madam Fair

    Institute of Scientific and Technical Information of China (English)

    1997-01-01

    "NADAM" means "entertainment" or "game" in Mongolian. The Nadam Fair, a traditional Mongolian gathering, is held each year in summer or autumn and features horse racing, wrestling, shooting, singing and dancing. In the summer, I, together with my friends, traveled to Dong Ujimqin Banner of Xilin Gol League in Inner Mongolia for

  13. TRAMS Project: variability and reliability of SRAM memories in sub-22nm bulk-CMOS technologies

    OpenAIRE

    2011-01-01

    The TRAMS (Terascale Reliable Adaptive MEMORY Systems) project addresses in an evolutionary way the ultimate CMOS scaling technologies and paves the way for revolutionary, most promising beyond-CMOS technologies. In this abstract we show the significant variability levels of future 18 and 13 nm device bulk-CMOS technologies as well as its dramatic effect on the yield of memory cells and circuits. Peer Reviewed

  14. White House Technology Reinvestment Project Briefing And Transcripts

    Science.gov (United States)

    1993-04-12

    Technology Development, is in the SBIR are two entirely separate Cartier Room, which is to your right. concepts. I’m sorry, Deployment. I’m sorry, MR. GUDAS...libraries whereby access is provided to to lay up, both polymer , metal matrix a large number of people and ways in and ceramic matrix composites are

  15. ATTAP: Advanced Turbine Technology Applications Project. Annual report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Purpose of ATTAP is to bring the automotive gas turbine engine to a technology state at which industry can make commercialization decisions. Activities during the past year included test-bed engine design and development, ceramic component design, materials and component characterization, ceramic component process development and fabrication, ceramic component rig testing, and test-bed engine fabrication and testing.

  16. Propulsion Noise Reduction Research in the NASA Advanced Air Transport Technology Project

    Science.gov (United States)

    Van Zante, Dale; Nark, Douglas; Fernandez, Hamilton

    2017-01-01

    The Aircraft Noise Reduction (ANR) sub-project is focused on the generation, development, and testing of component noise reduction technologies progressing toward the NASA far term noise goals while providing associated near and mid-term benefits. The ANR sub-project has efforts in airframe noise reduction, propulsion (including fan and core) noise reduction, acoustic liner technology, and propulsion airframe aeroacoustics for candidate conventional and unconventional aircraft configurations. The current suite of propulsion specific noise research areas is reviewed along with emerging facility and measurement capabilities. In the longer term, the changes in engine and aircraft configuration will influence the suite of technologies necessary to reduce noise in next generation systems.

  17. Expedited technology demonstration project final report: final forms

    Energy Technology Data Exchange (ETDEWEB)

    Hopper, R W

    1999-05-01

    ETDP Final Forms was an attempt to demonstrate the fabrication and performance of a ceramic waste form immobilizing the hazardous and radioactive elements of the MSO/SR mineral residues. The ceramic material had been developed previously. The fabrication system was constructed and functioned as designed except for the granulator. Fabrication of our particular ceramic, however, proved unsatisfactory. The ceramic material design was therefore changed toward the end of the project, replacing nepheline with zircon as the sink for silica. Preliminary results were encouraging, but more development is needed. Fabrication of the new ceramic requires major changes in the processing: Calcination and granulation would be replaced by spray drying; and sintering would be at higher temperature. The main goal of the project--demonstrating the fabrication and performance of the waste form--was not achieved. This report summarizes Final Forms' activities. The problem of immobilizing the MSO/SR mineral residues is discussed.

  18. CO2 CAPTURE PROJECT - AN INTEGRATED, COLLABORATIVE TECHNOLOGY DEVELOPMENT PROJECT FOR NEXT GENERATION CO2 SEPARATION, CAPTURE AND GEOLOGIC SEQUESTRATION

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Helen Kerr

    2003-08-01

    The CO{sub 2} Capture Project (CCP) is a joint industry project, funded by eight energy companies (BP, ChevronTexaco, EnCana, Eni, Norsk Hydro, Shell, Statoil, and Suncor) and three government agencies (1) European Union (DG Res & DG Tren), (2) Norway (Klimatek) and (3) the U.S.A. (Department of Energy). The project objective is to develop new technologies, which could reduce the cost of CO{sub 2} capture and geologic storage by 50% for retrofit to existing plants and 75% for new-build plants. Technologies are to be developed to ''proof of concept'' stage by the end of 2003. The project budget is approximately $24 million over 3 years and the work program is divided into eight major activity areas: (1) Baseline Design and Cost Estimation--defined the uncontrolled emissions from each facility and estimate the cost of abatement in $/tonne CO{sub 2}. (2) Capture Technology, Post Combustion: technologies, which can remove CO{sub 2} from exhaust gases after combustion. (3) Capture Technology, Oxyfuel: where oxygen is separated from the air and then burned with hydrocarbons to produce an exhaust with high CO{sub 2} for storage. (4) Capture Technology, Pre -Combustion: in which, natural gas and petroleum coke are converted to hydrogen and CO{sub 2} in a reformer/gasifier. (5) Common Economic Model/Technology Screening: analysis and evaluation of each technology applied to the scenarios to provide meaningful and consistent comparison. (6) New Technology Cost Estimation: on a consistent basis with the baseline above, to demonstrate cost reductions. (7) Geologic Storage, Monitoring and Verification (SMV): providing assurance that CO{sub 2} can be safely stored in geologic formations over the long term. (8) Non-Technical: project management, communication of results and a review of current policies and incentives governing CO{sub 2} capture and storage. Technology development work dominated the past six months of the project. Numerous studies are making

  19. Manufacturing Methods & Technology Project Execution Report. Second Half CY 1980

    Science.gov (United States)

    1981-03-01

    U.S. ARMY MATER-IEL DEVELOP AND READINESS COMMAND Lu ti MAANUFACTURING METHODS & 0 ~ ECHNOLOGY ELECTE, hAY 4 19 81 PROJECT EXECUTION REPORTautw w...Armament Materiel Readiness Command (Ammunition) . ... 83 Armament R&D Cormtand Armament Materiel Readiness Command (Weapons) .. . . . 105 Mobility ... MOBILIZATION PRODUCTION RATES ARE ESTIMATED TO BE S1t6 6000 PER YEAR. 5 78 4288 EXPLOSIVE SAFE SEPARATION AND SENSITIVITY CRITERIA ZERO PALLET SPACING

  20. Telecommunication Technologies for Smart Grid Projects with Focus on Smart Metering Applications

    Directory of Open Access Journals (Sweden)

    Nikoleta Andreadou

    2016-05-01

    Full Text Available This paper provides a study of the smart grid projects realised in Europe and presents their technological solutions with a focus on smart metering Low Voltage (LV applications. Special attention is given to the telecommunications technologies used. For this purpose, we present the telecommunication technologies chosen by several European utilities for the accomplishment of their smart meter national roll-outs. Further on, a study is performed based on the European Smart Grid Projects, highlighting their technological options. The range of the projects analysed covers the ones including smart metering implementation as well as those in which smart metering applications play a significant role in the overall project success. The survey reveals that various topics are directly or indirectly linked to smart metering applications, like smart home/building, energy management, grid monitoring and integration of Renewable Energy Sources (RES. Therefore, the technological options that lie behind such projects are pointed out. For reasons of completeness, we also present the main characteristics of the telecommunication technologies that are found to be used in practice for the LV grid.

  1. Ceramic Technology Project database: September 1993 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1994-01-01

    Data presented in this report represent an intense effort to improve processing methods, testing methods, and general mechanical properties of candidate ceramics for use in advanced heat engines. Materials discussed include GN-10, GS-44, GTE PY6, NT-154, NT-164, sintered-reaction-bonded silicon nitrides, silicon nitride combined with rare-earth oxides, NT-230, Hexoloy SX-G1, Dow Corning`s {beta}-Si{sub 3}N{sub 4}, and a few whisker-reinforced ceramic composites. Information in this report was taken from the project`s semiannual and bimonthly progress reports and from final reports summarizing the results of individual studies. Test results are presented in tabular form and in graphs. All data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies but not to draw conclusions from those data.

  2. Tehachapi Wind Energy Storage Project - Technology Performance Report #3

    Energy Technology Data Exchange (ETDEWEB)

    Pinsky, Naum [Southern California Edison, Rosemead, CA (United States); O' Neill, Lori [Southern California Edison, Rosemead, CA (United States)

    2017-03-31

    The TSP is located at SCE’s Monolith Substation in Tehachapi, California. The 8 MW, 4 hours (32 MWh) BESS is housed in a 6,300 square foot facility and 2 x 4 MW/4.5 MVA smart inverters are on a concrete pad adjacent to the BESS facility. The project will evaluate the capabilities of the BESS to improve grid performance and assist in the integration of large-scale intermittent generation, e.g., wind. Project performance was measured by 13 specific operational uses: providing voltage support and grid stabilization, decreasing transmission losses, diminishing congestion, increasing system reliability, deferring transmission investment, optimizing renewable-related transmission, providing system capacity and resources adequacy, integrating renewable energy (smoothing), shifting wind generation output, frequency regulation, spin/non-spin replacement reserves, ramp management, and energy price arbitrage. Most of the operations either shift other generation resources to meet peak load and other electricity system needs with stored electricity, or resolve grid stability and capacity concerns that result from the interconnection of intermittent generation. SCE also demonstrated the ability of lithium ion battery storage to provide nearly instantaneous maximum capacity for supply-side ramp rate control to minimize the need for fossil fuel-powered back-up generation. The project began in October, 2010 and will continue through December, 2016.

  3. A forward looking approach to project management tools, trends, and the impact of disruptive technologies

    CERN Document Server

    Gurjar, Nikhil

    2017-01-01

    This book is intended as a basis for advanced treatment of concepts in project management. In the current scenario where most questions are answered through the internet, the knowledge element in project management has come under the influence of disruptive technologies. In other words, project managers no longer get 'points' for knowing something that is easily available on the internet. This has far-reaching consequences. The present day project managers need to orient themselves to newer benchmarks of what is required for success on the business front. This book deals with a few such advanced concepts in project management. This book is not designed as an elementary primer to the field of project management, rather it is an advanced level treatment on the subject, to be read after the preliminary study has already been completed. The book is designed for practicing project managers, and graduate students in engineering and management, who need to understand the dynamics that are typically encountered in a ...

  4. The Science Fair: A New Look at an Old Tradition

    Science.gov (United States)

    McComas, William F.

    2011-01-01

    As a science teacher educator and former science teacher, the author has long known that the science fair should be part of his professional experience, but he had not given it much thought until recently. As he worked with his daughter's project, he became convinced that it is time to reconsider the range of activities one calls "science fairs."…

  5. WEB 2.0 TECHNOLOGIES IN ENTERPRISES AND PROJECT MANAGEMENT: ANALISYS AND A RESEARCH AGENDA

    Directory of Open Access Journals (Sweden)

    Marcirio Silveira Chaves.

    2015-06-01

    Full Text Available Web 2.0 technologies, e.g. wikis, social networks and blogs, have gained attention by companies and start being incorporated into project management in recent years. It is known that for the effective use of these technologies, project managers must overcome some barriers, such as: a. To adapt to the organizational culture and the culture of the company's employees; b. Check the knowledge of employees on the use of these tools; c. Provide adequate training before use; d. Re-evaluate the data storage structure, i.e. hardware and software; e. Improving communication between project developers. The objectives of this paper are twofold: 1. To analyze the use of IT 2.0 in business and project management and 2. To provide a research agenda on IT 2.0 use in project management. The research is characterized as exploratory and descriptive. As a result, the researchers receive an agenda to guide research on how to apply IT 2.0 in projects, while contributing to the practice allows project managers have a broad view of how such technologies are being used and how they can be used in years come. In addition, this paper seeks to disseminate the new field of Project Management 2.0.

  6. Improvement of Project Portfolio Management in an Information Technology Consulting Company

    Science.gov (United States)

    Kaewta, S.; Chutima, P.

    2014-06-01

    The scope of this research is to improve the efficiency of multiple project management in an information technology consulting company through the adaptation of the project portfolio management technique. The project management information system (PMIS) is implemented to establish effective communication channels so that internal and external teams as well as all relevant stakeholders can be employed to negotiate their work schedules. In addition, all activities created by multiple teams can be systematically reviewed and combined into a single checklist to be used as an agreed working plan for all team members. A general guideline for project portfolio management in information technology consulting companies is also proposed, which could results in a higher level of project on-time delivery.

  7. The Technology Reinvestment Project: Integrating Military and Civilian Industries

    Science.gov (United States)

    1993-07-01

    Extension Partnership Program 68 C-4. Department of Energy R&D Budgets by Mission 70 C-5. NASA Research and Development Budget 71 C-6. National Science...significantly the layoffs that will take place over the next few years because of cutbacks in defense spending. The technology programs may, however... layoffs that will take place over the next few years because of cutbacks in defense spending. The defense budget cutbacks proposed by the Clinton

  8. A Project in Support of Nuclear Technology Cooperation

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Deok Ku; Kim, Kyoung Pyo; Ko, Young Chel (and others)

    2006-12-15

    Establish strategies of international cooperation in an effect to promote our nation's leading role in international society, to form the foundation for the effective transfer of nuclear technology to developing countries, and to cope with the rapidly changing international nuclear climate. Using the INIS output data, it has provided domestic users with searching. Establish the integrated management system of information resources and to automate business flow and to improve business productivity through efficient information sharing.

  9. 城市道路地下结构清水混凝土模板施工技术%Construction Technology for Formwork of Fair-faced Concrete of Underground Structures of Urban Roads

    Institute of Scientific and Technical Information of China (English)

    秦凯

    2012-01-01

    为总结地下结构工程清水混凝土模板施工技术,以无锡太湖大道节点改造工程SD3标为例,介绍无锡太湖大道节点改造工程结构施工的特点和要求,着重介绍清水混凝土模板的选型、设计、安装和拆除等关键技术。实践证明:1)在地下结构清水混凝土施工中,采用定型大钢模板与普通胶模板相结合的方式,能够达到预期的饰面设计效果;2)模板的设计和计算,符合规范要求,能够满足工程质量和安全要求,并且能兼顾经济适用性原则;3)模板的安装与控制是清水混凝土质量的关键施工步骤。%The type selection, design, installation and disassembling of the formwork of the fair-faced concrete of the underground structure of a project in Wuxi are presented. The practice shows that : 1 ) The surface decoration effect ex- pected can be realized by using set steel formwork combined with rubber formwork. 2) The design and calculation of the formwork meets the requirements of relevant standards and meets the quality and safety requirements of the project. The formwork adopted is economic and appropriate. 3 ) The installation and control of the formwork are key procedures to guarantee the quality of fair-faced concrete.

  10. An Empirical Analysis of Technology Transfer of National R&D Projects in South Korea

    Directory of Open Access Journals (Sweden)

    Mi-Sun Kim

    2015-01-01

    Full Text Available This study is aimed at seeking policy implications for the policy makers of South Korean government and finding a direction to support R&D institutions in performing R&D activities more efficiently, by analyzing the factors influencing technology transfer of the national R&D projects. The data retrieved from NTIS (National Science & Technology Information Service was used in analyzing the results of 575 projects with 1,903 cases of technology transfer, performed by the Ministry of Science, ICT and Future Planning, between 2002 and 2012. We found that there were significant differences between the government funded institutions and the universities and between basic R&D and applied ones. We also discovered that the government funded institutions did not necessarily take a better position than the universities in terms of the quantity of technology transfer. Lastly, the applied R&D of the universities was very vulnerable in terms of technology transfer.

  11. Minimal Technologies Application Project, Hohenfels Training Area, Germany: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Zellmer, S.D.; Hinchman, R.R.; Johnson, D.O. [Argonne National Lab., IL (United States). Energy Systems Div.; Severinghaus, W.D. [Corps of Engineers, Champaign, IL (United States); Brent, J.J. [Army Construction Engineering Research Lab., Champaign, IL (United States)

    1991-12-01

    At the US Army Hohenfels Training Area in Germany, more than 30 years of continuous and intensive tactical training has caused extensive environmental damage because of the loss of vegetative cover and accelerated soil erosion. A project was conducted to evaluate the cost-effectiveness and relative benefits of various revegetation procedures. These procedures involved amendment and seedbed preparation options that were combined with three different durations of site closure. The point-intercept method was used to measure the types and amounts of vegetation established and changes in the vegetative community. Over three growing seasons, applications of fertilizer and seed increased the percent grass, legume, and total vegetative cover. The duration of site closure had no influence on the types or amounts of ground cover established. Materials made up only 10% of the total cost of the fertilization and seeding operations. The results of the research indicate that less expensive methods of amendment application should be evaluated. The data also show that site closure is not practical, economical, or necessary. The results of this project suggest that a regular maintenance program consisting of seeding and fertilization is required to maintain adequate vegetative cover and control erosion on tactical training areas.

  12. Aviation Safety Program Atmospheric Environment Safety Technologies (AEST) Project

    Science.gov (United States)

    Colantonio, Ron

    2011-01-01

    Engine Icing: Characterization and Simulation Capability: Develop knowledge bases, analysis methods, and simulation tools needed to address the problem of engine icing; in particular, ice-crystal icing Airframe Icing Simulation and Engineering Tool Capability: Develop and demonstrate 3-D capability to simulate and model airframe ice accretion and related aerodynamic performance degradation for current and future aircraft configurations in an expanded icing environment that includes freezing drizzle/rain Atmospheric Hazard Sensing and Mitigation Technology Capability: Improve and expand remote sensing and mitigation of hazardous atmospheric environments and phenomena

  13. LNG - Status in Denmark. Technology and potential. Project report

    Energy Technology Data Exchange (ETDEWEB)

    Naeslund, M.

    2012-05-15

    The interest for LNG both on a small and a large scale is increasing worldwide. The experiences and knowledge on LNG is limited in Denmark. The Danish gas companies' Technical Management Group (TCG) has asked for a status report including a technology description and an evaluation of the potential in Denmark. A survey of primarily small-scale LNG technology is done in the report. The focus is motivated by the new areas of gas utilisation that become possible with small-scale LNG. Small-scale LNG in this study is defined as LNG stored and used at the application or in an isolated gas grid. The small-scale use of LNG has today an almost negligible share of the total LNG trade but offers interesting new applications for gas utilisation. LNG on a small scale can be used primarily as: 1) Ship fuel. 2) Truck fuel (heavy duty long distance). 3) Individual users not connected to the natural gas grid. 4) Backup for upgraded biogas to individual users and vehicle fleets. 5) Security of supply or supply enhancement of heavily loaded parts of the gas grid. 6) Small-scale storage and/or peak shaving. All but the first topics are natural uses for the current Danish gas distributors. LNG as ship fuel may engage other specialized LNG companies. The report contains a technical description of the parts in primarily small-scale LNG handling and operation. Liquefaction, transport, storage, engine technologies, gas quality and safety aspects related to LNG are covered. There seem to be two more or less separate paths for LNG in Denmark, onshore and off-shore use. These are not, apparently, sharing their experiences and knowledge. Rules and regulations are also different which may create some problems in the interface, for example ship bunkering. Further studies are suggested in the area of gas quality and engine technologies and adaptation of foreign guidelines for small-scale installations to Danish conditions. These guidelines ought to be based on international standards and

  14. Real Time Technology Application Demonstration Project Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Volpe, John [Univ of KY, Center for Applied Energy Research, Kentucky Research Consortium for Energy and Environment; Hampson, Steve [Univ of KY, Center for Applied Energy Research, Kentucky Research Consortium for Energy and Environment; Johnson, Robert L [Argonne National Lab, Environmental Science Div.

    2008-09-01

    The work and results described in this final report pertain to the demonstration of real-time characterization technologies applied to potentially contaminated surface soils in and around Area of Concern (AOC) 492 at the Paducah Gaseous Diffusion Plant (PGDP). The work was conducted under the auspices of Kentucky Research Consortium for Energy and Environment (KRCEE). KRCEE was created to support the Department of Energy's (DOE) efforts to complete the expeditious and economically viable environmental restoration of the Paducah Gaseous Diffusion Plant (PGDP), the Western Kentucky Wildlife Management Area (WKWMA), and surrounding areas.

  15. New technology for interactive CAL: the Origami project

    Directory of Open Access Journals (Sweden)

    Robert Harding

    1997-12-01

    Full Text Available For many years, almost since the dawn of computing, people have speculated about the paperless society. Each new technology is heralded as the one that will finally take us to the fully electronic Utopia. However, the use of computers as document preparation tools has actually increased the number of paper documents. The latest mass-market development, the Internet, is unlikely to buck this trend even though the tools used seem to encourage on-screen browsing. The problems inherent with screen presentation have not gone away, while the amount of information available to the average computer user is increasing all the time.

  16. Fairness Through Awareness

    CERN Document Server

    Dwork, Cynthia; Pitassi, Toniann; Reingold, Omer; Zemel, Rich

    2011-01-01

    "What can be learned about from the sole fact that I have been shown this on-line advertisement?" By definition, the answer to this question is non-trivial whenever advertisements are not served indiscriminately. Advertisers, hoping to have targeted precisely and appropriately, use information from multiple sources to give different on-line experiences to different people. Thus the message of "giving you the ads that interest you" does not tell the whole story of behavioral targeting, and the resulting differentiation in user experience may, or may not, work to the advantage of the user. When it results in differential pricing it arguably does not benefit some users; when it results in steering minorities away from certain neighborhoods or toward less advantageous credit card offerings, it is illegal. This raises the question of fairness in advertising, and, more generally, of fairness in classification. This rather broad topic is not restricted to the digital world, and encompasses classification in such div...

  17. On a fair verdict

    Directory of Open Access Journals (Sweden)

    Sergei G. Ol'kov

    2014-01-01

    Full Text Available Objective the study of the phenomenon of justice in general and fairness in judicial verdicts in particular. Methods 1 observation 2 deduction 3 use of the laws of formal logic 4 comparative analysis 5 formal legal 6 mathematical modeling. Results the author considers the possibility of creating the scale of good and evil. As a result of rendering of legal laws in the language of mathematics were obtained the following conclusions 1 definition of justice as equality between the objective truth of the real world X and the subjective evaluation of this truth Y Y X assessment is on the line of justice in the Cartesian coordinate system if the deeds axis is correctly scaled ndash quotso it actually is and this is our answerrdquo the fair sentence is an accurate evaluation by the court the value of punishment of the deed the legal relations subject with the exact scaling of deeds and punishments axes y x where y is the assessment x ndash deed 2 general suggestions for scaling coordinate axes of deeds abscissa and penalties ordinates ndash proposal on the need to develop scales of relations for valuation of objects ndash deeds and evaluation as it is ndash the scale of punishments 3 grounds for the idea that not every degree or measure of the consistency of the realworld objects estimation by a wide range of evaluation subjects is fair justice 4 identification of the range of existing problems in the judicial practice in making fair sentences anbspthe absence in the criminal law of the clear scales of deeds and punishments the legislator does not give a clear estimation of the deed but establishes either continuous or multiple evaluation b modern legislator cannot give absolute scale of good and evil but specifies a relative scale in implicit form dependent on time place method of organization of power in the state ideas of the society about good and evil and justice. As a result the relative scale is quotslidingquot in time and space c the

  18. Bargaining and fairness.

    Science.gov (United States)

    Binmore, Kenneth

    2014-07-22

    The idea that human morality might be the product of evolution is not popular. The reason is partly that the moral principles that actually govern our day-to-day behavior have been idealized in a way that makes a natural origin seem impossible. This paper puts the case for a more down-to-earth assessment of human morality by arguing that the evolution of our sense of fairness can be traced to the practicalities of food-sharing. When animals share food, they can be seen as enjoying the fruits of an implicit bargain to ensure each other against hunger. The implications of this observation are explored using the tools of game theory. The arguments lead to a structure for fair bargains that closely resembles the structure proposed by John Rawls, the leading moral philosopher of the last century.

  19. The PANDA experiment at FAIR

    Energy Technology Data Exchange (ETDEWEB)

    Destefanis, M.

    2013-12-15

    The PANDA (antiProton ANnihilation at DArmstadt) experiment is one of the major projects in preparation at the upcoming FAIR facility in Darmstadt, Germany. It will study interactions between antiprotons and protons or nuclei in the momentum range from 1.5 GeV/c to 15 GeV/c. The PANDA scientific program will address a wide range of topics, all aiming at improving our understanding of the strong interaction and hadron structure. The PANDA detector is a general-purpose spectrometer that will collect high quality and high statistics data in the fields of meson spectroscopy, baryon-antibaryon production, baryon spectroscopy, hypernuclear physics, hadron properties in the nuclear medium, and nucleon structure. This paper reviews some of the main physics topics of the experiment, together with a presentation of the detector.

  20. Northwest Open Automated Demand Response Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Kiliccote, Sila; Piette, Mary Ann; Dudley, Junqiao

    2010-03-17

    The Lawrence Berkeley National Laboratory (LBNL) Demand Response Research Center (DRRC) demonstrated and evaluated open automated demand response (OpenADR) communication infrastructure to reduce winter morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA) in the Seattle City Light (SCL) service territory at five sites: Seattle Municipal Tower, Seattle University, McKinstry, and two Target stores. This report describes the process and results of the demonstration. OpenADR is an information exchange model that uses a client-server architecture to automate demand-response (DR) programs. These field tests evaluated the feasibility of deploying fully automated DR during both winter and summer peak periods. DR savings were evaluated for several building systems and control strategies. This project studied DR during hot summer afternoons and cold winter mornings, both periods when electricity demand is typically high. This is the DRRC project team's first experience using automation for year-round DR resources and evaluating the flexibility of commercial buildings end-use loads to participate in DR in dual-peaking climates. The lessons learned contribute to understanding end-use loads that are suitable for dispatch at different times of the year. The project was funded by BPA and SCL. BPA is a U.S. Department of Energy agency headquartered in Portland, Oregon and serving the Pacific Northwest. BPA operates an electricity transmission system and markets wholesale electrical power at cost from federal dams, one non-federal nuclear plant, and other non-federal hydroelectric and wind energy generation facilities. Created by the citizens of Seattle in 1902, SCL is the second-largest municipal utility in America. SCL purchases approximately 40% of its electricity and the majority of its transmission from BPA through a preference contract. SCL also