Evaluating a voice recognition system: finding the right product for your department.

Science.gov (United States)

Freeh, M; Dewey, M; Brigham, L

2001-06-01

The Department of Radiology at the University of Utah Health Sciences Center has been in the process of transitioning from the traditional film-based department to a digital imaging department for the past 2 years. The department is now transitioning from the traditional method of dictating reports (dictation by radiologist to transcription to review and signing by radiologist) to a voice recognition system. The transition to digital operations will not be complete until we have the ability to directly interface the dictation process with the image review process. Voice recognition technology has advanced to the level where it can and should be an integral part of the new way of working in radiology and is an integral part of an efficient digital imaging department. The transition to voice recognition requires the task of identifying the product and the company that will best meet a department's needs. This report introduces the methods we used to evaluate the vendors and the products available as we made our purchasing decision. We discuss our evaluation method and provide a checklist that can be used by other departments to assist with their evaluation process. The criteria used in the evaluation process fall into the following major categories: user operations, technical infrastructure, medical dictionary, system interfaces, service support, cost, and company strength. Conclusions drawn from our evaluation process will be detailed, with the intention being to shorten the process for others as they embark on a similar venture. As more and more organizations investigate the many products and services that are now being offered to enhance the operations of a radiology department, it becomes increasingly important that solid methods are used to most effectively evaluate the new products. This report should help others complete the task of evaluating a voice recognition system and may be adaptable to other products as well.

An Evaluation of Wind Turbine Technology at Peterson Air Force Base

Science.gov (United States)

2005-03-01

by the wind speed. Darrieus turbines are ordinarily inexpensive and are used for electricity generation and irrigation. One advantage to a...AN EVALUATION OF WIND TURBINE TECHNOLOGY...02 AN EVALUATION OF WIND TURBINE TECHNOLOGY AT PETERSON AIR FORCE BASE THESIS Presented to the Faculty Department of

US Department of Energy, Office of Technology Development, mixed-waste treatment research, development, demonstration, testing, and evaluation

International Nuclear Information System (INIS)

Berry, J.B.; Backus, P.M.; Conley, T.B.; Coyle, G.J.; Lurk, P.W.; Wolf, S.M.

1993-01-01

Department of Energy (DOE) mixed waste is contaminated with both chemically hazardous and radioactive species. The DOE is responsible for regulating radioactive species while the Environmental Protection Agency (EPA) is responsible for regulating hazardous species. Dual regulations establish treatment standards and therefore affect the treatment technologies used to process mixed waste. This duality is reflected in technology development initiatives. Significant technology development has been conducted for either radioactive or hazardous waste, but limited technology development, specifically addressing mixed waste treatment issues, has been completed. Technology has not been designed, developed, demonstrated, or tested to produce a low-risk final waste form that increases the probability that the final waste form will be disposed

Light detection and ranging (LiDAR) technology evaluation.

Science.gov (United States)

2010-10-01

Evaluation project was undertaken to provide an analysis on the current state of Laser based technology and its applicability, : potential accuracies and information content with respect to Missouri Department of Transportation( MODOT) applications.

Environmental Science and Technology department. Annual report 1991

Energy Technology Data Exchange (ETDEWEB)

Jensen, A.; Gunderson, V.; Hansen, H.; Gissel Nielsen, G.; Nielsen, O.J.; Oestergaard, H. [eds.

1992-06-01

Selected activities in the Environmental Science and Technology Department during 1991 are presented. The research approach in the department is predominantly experimental. The research topics emphasized are introduced and reviewed in chapters one to seven: 1. Introduction, 2. The Atmosphere, 3. Plant Genetics and Resistance Biology, 4. Plant Nutrition, 5. Geochemistry, 6. Ecology, 7. Other activities. The Department`s contribution to national and international collaborative research programmes is presented together with information about large facilities managed and used by the department. Information about the department`s education and training activities are included in the annual report along with lists of publications, publications in press, lectures and poster presentations. Further, names of the scientific and technical staff members, Ph.D. students and visiting scientists are listed. (au) (23 ills., 58 refs.).

Best Available Technology (BAT) guidance for radiological liquid effluents at US Department of Energy Facilities

International Nuclear Information System (INIS)

Wallo, A. III; Peterson, H.T. Jr.; Ikenberry, T.A.; Baker, R.E.

1993-01-01

The US Department of Energy (DOE), in DOE Order 5400.5 (1990), directs operators of DOE facilities to apply the Best Available Technology (BAT) to control radiological liquid effluents from these facilities when specific conditions are present. DOE has published interim guidance to assist facility operators in knowing when a BAT analysis is needed and how such an analysis should be performed and documented. The purpose of the guidance is to provide a uniform basis in determining BAT throughout DOE and to assist in evaluating BAT determinations during programmatic audits. The BAT analysis process involves characterizing the effluent source; identifying and selecting candidate control technologies; evaluating the potential environmental, operational, resource, and economic impacts of the control technologies; developing an evaluation matrix for comparing the technologies; selecting the BAT; and documenting the evaluation process. The BAT analysis process provides a basis for consistent evaluation of liquid effluent releases, yet allows an individual site or facility the flexibility to address site-specific issues or concerns in the most appropriate manner

Department of Plasma Physics and Technology - Overview

International Nuclear Information System (INIS)

Sadowski, M.

1997-01-01

In 1996 the main activities of Department P-5 (until December 1996 known as the Department of Thermonuclear Research) were concentrated on 5 topics: 1. Selected problems of plasma theory, 2. Studies of phenomena within high-current plasma concentrators, 3. Development of plasma diagnostic methods, 4. Studies in the field of fusion technology, 5. Research on new plasma-ion technologies. Theoretical studies mainly concerned elementary processes occurring within a plasma, and particularly those within near-electrode regions of microwave discharges as well as those within near-wall layers (SOL) of tokamaks. We also developed computational packages for parameter identification and modelling of physical phenomena in pulse plasma coaxial accelerators. Experimental studies were concentrated on the generation of a dense magnetized plasma in different high-current PF (Plasma Focus) facilities and small Z-Pinch devices. We carried out investigations of X-rays, relativistic electron beams (REBs), accelerated primary ions, and fast products of fusion reactions for deuterium discharges. Research on plasma diagnostics comprised the development of methods and equipment for studies of X-ray emission, pulsed electron beams, and fast ions, using special Cherenkov-type detectors of electrons and solid-state nuclear track detectors (SSNTDs) of ions. New diagnostic techniques were developed. Studies in the field of fusion technology concerned the design, construction, and testing of different high-voltage pulse generators. We also developed special opto-electronic systems for control and data transmission. Research on plasma-ion technology concentrated on the generation of pulsed high-power plasma-ion streams and their applications for the surface modification of semiconductors, pure metals and alloys. The material engineering studies were carried out in close collaboration with our P-9 Department and other domestic and foreign research centers

U.S. Department of Energy, Office of Technology Development, mixed-waste treatment research, development, demonstration, testing, and evaluation

International Nuclear Information System (INIS)

Berry, J.B.

1993-01-01

Both chemically hazardous and radioactive species contaminate mixed waste. Historically, technology has been developed to treat either hazardous or radioactive waste. Technology specifically designed to produce a low-risk final waste form for mixed low-level waste has not been developed, demonstrated, or tested. Site-specific solutions to management of mixed waste have been initiated; however, site-specific programs result in duplication of technology development effort between various sites. There is a clear need for technology designed to meet the unique requirements for mixed-waste processing and a system-wide integrated strategy for developing technology and managing mixed waste. This paper discusses the US Department of Energy (DOE) approach to addressing these unique requirements through a national technology development effort

Enviromental Science and Technology Department. Annual report 1990

Energy Technology Data Exchange (ETDEWEB)

Jensen, A; Helms Joergensen, J; Nielsen, O J; Nilsson, K; Aarkrog, A

1991-03-01

Selected activities of the Environmental Science and Technology Department during 1990 are presented. The research in the department is predominantly experimental, and the research topics emphaized are introduced and reviewed in eight chapters: 1. Introduction, 2. The Atmospheric Environment, 3. Plant Genetics and Biology, 4. Nutrient Efficiency in Plant Production, 5. Chemistry of the Geosphere, 6. Ecology and Mineral Cycling, 7. Other Acitvities, 8. Large Facilities. The department`s contribution to national and international collaborative research programmes is presented together with information about large facilities managed and used by the department as well as activities within education and training. Lists of scientific and technical staff members, visiting scientists, Ph.D. students, publications, lectures and poster presentations are included in the report. (author).

Kansas Department of Transportation research & technology news, vol. 6 #2, December 2013.

Science.gov (United States)

2013-12-01

Research & Technology News is a newsletter published by the Kansas Department of : Transportation, Bureau of Researchs Technology Transfer Section, in cooperation with : the Federal Highway Administration and the U.S. Department of Transportation.

Development of treatment technologies of the processing of U.S. Department of Energy mixed waste

International Nuclear Information System (INIS)

Backus, P.M.; Berry, J.B.; Coyle, G.J. Jr.; Lurk, P.; Wolf, S.M.

1994-01-01

Waste contaminated with chemically hazardous and radioactive species is defined as mixed waste. Significant technology development has been conducted for separate treatment of hazardous and radioactive waste, but technology development addressing mixed-waste treatment has been limited. In response to the need for a comprehensive and consistent approach to mixed-waste technology development, the Office of Technology Development of the US Department of Energy (DOE) has established the Mixed Waste Integrated Program. The program is identifying and evaluating treatment technologies to treat present and estimated future mixed wastes at DOE sites. The status of the technical initiatives in chemical/physical treatment, waste destruction/stabilization technology, off-gas treatment, and final waste form production/assessment is described in this paper

Evaluation Report on The Department's Unclassified Cyber Security Program - 2009

International Nuclear Information System (INIS)

Anon

2009-01-01

Industry experts report that security challenges and threats are continually evolving as malicious activity has become more web-based and attackers are able to rapidly adapt their attack methods. In addition, the number of data breaches continues to rise. In an effort to mitigate and address threats and protect valuable information, the Department of Energy anticipated spending about $275 million in Fiscal Year (FY) 2009 to implement cyber security measures necessary to protect its information technology resources. These systems and data are designed to support the Department's mission and business lines of energy security, nuclear security, scientific discovery and innovation, and environmental responsibility. The Federal Information Security Management Act of 2002 (FISMA) provides direction to agencies on the management and oversight of information security risks, including design and implementation of controls to protect Federal information and systems. As required by FISMA, the Office of Inspector General conducts an annual independent evaluation to determine whether the Department's unclassified cyber security program adequately protects its information systems and data. This memorandum and the attached report present the results of our evaluation for FY 2009. The Department continued to make incremental improvements in its unclassified cyber security program. Our evaluation disclosed that most sites had taken action to address weaknesses previously identified in our FY 2008 evaluation report. They improved certification and accreditation of systems; strengthened configuration management of networks and systems; performed independent assessments; and, developed and/or refined certain policies and procedures. In addition, the Department instituted a centralized incident response organization designed to eliminate duplicative efforts throughout the Department. As we have noted in previous reports, the Department continued to maintain strong network perimeter

Environmental Science and Technology department. Annual report 1991

Energy Technology Data Exchange (ETDEWEB)

Jensen, A.; Gunderson, V.; Hansen, H.; Gissel Nielsen, G.; Nielsen, O.J.; Oestergaard, H. (eds.)

1992-06-01

Selected activities in the Environmental Science and Technology Department during 1991 are presented. The research approach in the department is predominantly experimental. The research topics emphasized are introduced and reviewed in chapters one to seven: 1. Introduction, 2. The Atmosphere, 3. Plant Genetics and Resistance Biology, 4. Plant Nutrition, 5. Geochemistry, 6. Ecology, 7. Other activities. The Department's contribution to national and international collaborative research programmes is presented together with information about large facilities managed and used by the department. Information about the department's education and training activities are included in the annual report along with lists of publications, publications in press, lectures and poster presentations. Further, names of the scientific and technical staff members, Ph.D. students and visiting scientists are listed. (au) (23 ills., 58 refs.).

Environmental Science and Technology department. Annual report 1991

International Nuclear Information System (INIS)

Jensen, A.; Gunderson, V.; Hansen, H.; Gissel Nielsen, G.; Nielsen, O.J.; Oestergaard, H.

1992-06-01

Selected activities in the Environmental Science and Technology Department during 1991 are presented. The research approach in the department is predominantly experimental. The research topics emphasized are introduced and reviewed in chapters one to seven: 1. Introduction, 2. The Atmosphere, 3. Plant Genetics and Resistance Biology, 4. Plant Nutrition, 5. Geochemistry, 6. Ecology, 7. Other activities. The Department's contribution to national and international collaborative research programmes is presented together with information about large facilities managed and used by the department. Information about the department's education and training activities are included in the annual report along with lists of publications, publications in press, lectures and poster presentations. Further, names of the scientific and technical staff members, Ph.D. students and visiting scientists are listed. (au) (23 ills., 58 refs.)

THE DEVELOPMENT OF COAL-BASED TECHNOLOGIES FOR DEPARTMENT OF DEFENSE FACILITIES

Energy Technology Data Exchange (ETDEWEB)

Bruce G. Miller; Sharon Falcone Miller; Sarma V. Pisupati; Chunshan Song; Ronald S. Wasco; Ronald T. Wincek; Xiaochun Xu; Alan W. Scaroni; Richard Hogg; Subhash Chander; M. Thaddeus Ityokumbul; Mark S. Klima; Peter T. Luckie; Adam Rose; Richard L. Gordon; Jeffrey Lazo; A. Michael Schaal

2004-01-30

The third phase of a three-phase project investigating the development of coal-based technologies for US Department of Defense (DOD) facilities was completed. The objectives of the project were to: decrease DOD's dependence on foreign oil and increase its use of coal; promote public and private sector deployment of technologies for utilizing coal-based fuels in oil-designed combustion equipment; and provide a continuing environment for research and development of coal-based fuel technologies for small-scale applications at a time when market conditions in the US are not favorable for the introduction of coal-fired equipment in the commercial and industrial capacity ranges. The Phase III activities were focused on evaluating deeply-cleaned coals as fuels for industrial boilers and investigating emissions control strategies for providing ultra-low emissions when firing coal-based fuels. This was addressed by performing coal beneficiation and preparation studies, and bench- to demonstration-scale emissions reduction studies. In addition, economic studies were conducted focused on determining cost and market penetration, selection of incentives, and regional economic impacts of coal-based technologies.

Enviromental Science and Technology Department. Annual report 1990

International Nuclear Information System (INIS)

Jensen, A.; Helms Joergensen, J.; Nielsen, O.J.; Nilsson, K.; Aarkrog, A.

1991-03-01

Selected activities of the Environmental Science and Technology Department during 1990 are presented. The research in the department is predominantly experimental, and the research topics emphaized are introduced and reviewed in eight chapters: 1. Introduction, 2. The Atmospheric Environment, 3. Plant Genetics and Biology, 4. Nutrient Efficiency in Plant Production, 5. Chemistry of the Geosphere, 6. Ecology and Mineral Cycling, 7. Other Acitvities, 8. Large Facilities. The department's contribution to national and international collaborative research programmes is presented together with information about large facilities managed and used by the department as well as activities within education and training. Lists of scientific and technical staff members, visiting scientists, Ph.D. students, publications, lectures and poster presentations are included in the report. (author)

Assessment and evaluation of technologies for environmental restoration. Progress report

Energy Technology Data Exchange (ETDEWEB)

Uzochukwu, G. A. [North Carolina A and T State Univ., Greensboro, NC (United States)

2000-06-30

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

Assessment and evaluation of technologies for environmental restoration. Progress report

International Nuclear Information System (INIS)

Uzochukwu, G. A.

2000-01-01

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

Assessment and evaluation of technologies for environmental restoration. Progress report

International Nuclear Information System (INIS)

Uzochukwu, G.A.

1999-01-01

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites

ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT. ANNUAL REPORT TO THE US DEPARTMENT OF ENERGY

International Nuclear Information System (INIS)

PROJECT STAFF

2001-01-01

OAK A271 ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT ANNUAL REPORT TO THE US DEPARTMENT OF ENERGY. The General Atomics (GA) Advanced Fusion Technology Program seeks to advance the knowledge base needed for next-generation fusion experiments, and ultimately for an economical and environmentally attractive fusion energy source. To achieve this objective, they carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and they conduct research to develop basic and applied knowledge about these technologies. GA's Advanced Fusion Technology program derives from, and draws on, the physics and engineering expertise built up by many years of experience in designing, building, and operating plasma physics experiments. The technology development activities take full advantage of the GA DIII-D program, the DIII-D facility and the Inertial Confinement Fusion (ICF) program and the ICF Target Fabrication facility

U.S. Department of Energy FreedomCAR & Vehicle Technologies Program: Oil Bypass Filter Technology Evaluation Seventh Quarterly Report April - June 2004

Energy Technology Data Exchange (ETDEWEB)

Larry Zirker; James Francfort; Jordan Fielding

2004-08-01

This Oil Bypass Filter Technology Evaluation quarterly report (April–June 2004) details the ongoing fleet evaluation of an oil bypass filter technology by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy’s (DOE) FreedomCAR & Vehicle Technologies Program. Eight INEEL four-cycle diesel engine buses used to transport INEEL employees on various routes and six INEEL Chevrolet Tahoes with gasoline engines are equipped with oil bypass filter systems from the puraDYN Corporation. The bypass filters are reported to have engine oil filtering capability of <1 micron and a built-in additive package to facilitate extended oil-drain intervals. This quarter, the eight diesel engine buses traveled 85,632 miles. As of the end of June 2004, the eight buses have accumulated 498,814 miles since the beginning of the test and 473,192 miles without an oil change. This represents an avoidance of 39 oil changes, which equates to 1,374 quarts (343 gallons) of new oil not consumed and, furthermore, 1,374 quarts of waste oil not generated. One bus had its oil changed due to the degraded quality of the engine oil. Also this quarter, the six Tahoe test vehicles traveled 48,193 miles; to date, the six Tahoes have accumulated 109,708 total test miles. The oil for all six of the Tahoes was changed this quarter due to low Total Base Numbers (TBN). The oil used initially in the Tahoe testing was recycled oil; the recycled oil has been replaced with Castrol virgin oil, and the testing was restarted. However, the six Tahoe’s did travel a total of 98,266 miles on the initial engine oil. This represents an avoidance of 26 oil changes, which equates to 130 quarts (32.5 gallons) of new oil not consumed and, consequently, 130 quarts of waste oil not generated. Based on the number of oil changes avoided by the test buses and Tahoes to date, the potential engine oil savings if an oil bypass filter system were used was estimated for the INEEL, DOE

Department of Accelerator Physics and Technology: Overview

International Nuclear Information System (INIS)

Plawski, E.

2003-01-01

Full text: The main activities of the Accelerator Physics and Technology Department were focused on following subjects: - contribution to development and building of New Therapeutical Electron Accelerator delivering the photon beams of 6 and 15 MeV, - study of the photon and electron spectra of narrow photon beams with the use of the BEAM/EGSnrc codes, - design and construction of special RF structures for use in CLIC Test Facility in CERN, - design and construction of 1:1 copper, room temperature models of accelerating superconducting 1.3 GHz structures for TESLA Project in DESY. In spite of drastic reduction of scientific and technical staff (from 16 to 10 persons) the planned works were successfully completed, but requested some extraordinary efforts. In realisation of 6/15 MeV Accelerator Project, the Department was responsible all along the project for calculations of all most important parts (electron gun, accelerating structure, beam focusing, achromatic deviation) and also for construction and physical modelling of some strategic subassemblies. The results of scientific and technical achievements of our Department in this work are documented in the Annex to Final Report on realisation of KBN Scientific Project No PBZ 009-13 and earlier Annual Reports 2000 and 2001. The results of Monte Carlo calculations of narrow photon beams and experimental verification using Varian Clinac 2003CD, Simens Mevatron and CGR MeV Saturn accelerators ended up with PhD thesis prepared by MSc Anna Wysocka. Her thesis: Collimation and Dosimetry of X-ray Beams for Stereotactic Radiotherapy with Linear Accelerators was sponsored by KBN scientific Project Nr T11E 04121. In collaboration with LNF INFN Frascati the electron beam deflectors were designed for CERN CLIC Test Facility CTF3. These special type travelling wave RF structures were built by our Department and are actually operated in CTF3 experiment. As the result of collaboration with TESLA-FEL Project in DESY, the set of RF

Evaluation and compilation of DOE [Department of Energy] waste package test data

International Nuclear Information System (INIS)

Interrante, C.; Escalante, E.; Fraker, A.; Plante, E.

1989-10-01

This report summarizes evaluations by the National Institute of Standards and Technology (NIST) of Department of Energy (DOE) activities on waste packages designed for containment of radioactive high-level nuclear waste (HLW) for the six month period February 1988 through July 1988. Activities for the DOE Materials Characterization Center are reviewed for the period January 1988 through June 1988. A summary is given of the Yucca Mountain, Nevada disposal site activities. Short discussions relating to the reviewed publications are given and complete reviews and evaluations are included. 20 refs., 1 fig., 1 tab

Department of Nuclear Equipment '' High Technology Center - HITEC '' - Overview

International Nuclear Information System (INIS)

Krawczyk, P.

2010-01-01

Full text: The Department of Nuclear Equipment specializes in applications of accelerator technologies in medicine and industrial radiography. It combines research and development with manufacturing activities. The year 2009 was an important and busy period for the Department. We expect to observe already its full results in the coming year. In 2009, the Department concentrated on developing technologies, solutions and elements for use in the new generation of medical accelerators. Design, manufacturing and tests of a model of a new accelerating structure were conducted. The overall mechanical and electrical design of the accelerator was reworked and partially tested. Major efforts were devoted to creating an efficient software environment for the accelerators: new concepts for the control system were developed and tested, and a recording and verification system based on the DICOM standard was completed. A new imaging system was designed and manufactured and work on the associated imaging software was initiated. Design work on a multileaf collimator, begun in 2008, was continued. In effect, an operational model of the device was manufactured which allowed a practical verification of the design ideas. A lull scale prototype is scheduled for manufacture in 2010. The 2009 edition of the HITEC School on Medical Accelerators was directed to Medical Technicians. Very positive feedback from the participants proves the correctness of that decision. The year 2009 was also important for the manufacturing capabilities of the Department of Nuclear Equipment: a new Precision Machining Workshop was established and equipped with modern CNC milling machines. Also, the Vacuum Technologies Laboratory significantly extended the range of its machinery. In 2009 HITEC underwent deep organizational changes. The Quality Management System that governs all aspects of the Department's activities was also substantially redesigned. In December 2009, the new System was successfully audited and

75 FR 47631 - Swets Information Services, Operations Department, Information Technology Group, Marketing Group...

Science.gov (United States)

2010-08-06

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,668] Swets Information Services, Operations Department, Information Technology Group, Marketing Group, Finance Group, Runnemede..., Information Technology (IT) Group, Marketing Group and the Finance Group into one entity instead of...

Effect of Kiken-Yochi training (KYT) induction on patient safety at the department of radiological technology

International Nuclear Information System (INIS)

Yasuda, Mitsuyoshi; Uchiyama, Yushi; Sakiyama, Koshi; Shibata, Masako; Sasaki, Haruaki; Kato, Kyoichi; Nakazawa, Yasuo; Sanbe, Takeyuki; Yoshikawa, Kohki

2013-01-01

In this report, we evaluated whether radiological technologists' (RTs') awareness of patient safety would improve and what kind of effects would be seen at the department of radiological technology by introducing KYT [K: kiken (hazard), Y: yochi (prediction), T: (training)]. KYT was carried out by ten RTs based on a KYT sheet for the department of radiological technology. To evaluate the effects of KYT, we asked nine questions each to ten participants before and after KYT enforcement with regard to their attitude to patient safety and to operating procedures for working safely. Significant improvements after KYT enforcement were obtained in two items concerning medical safety: It is important for any risk to be considered by more than one person; The interest in preventive measures against medical accident degree conducted now) and one concerning operating procedures (It is necessary to have a nurse assist during testing with the mobile X-ray apparatus) (p<0.05). Performing KYT resulted in improved awareness of the importance of patient safety. KYT also enabled medical staffers to evaluate objectively whether the medical safety measures currently performed would be effective for patients. (author)

Involving stakeholders in evaluating environmental restoration technologies

International Nuclear Information System (INIS)

McCabe, G.H.; Serie, P.J.

1993-02-01

Involving citizens, interest groups, and regulators in environmental restoration and waste management programs is a challenge for government agencies and the organizations that support them. To be effective, such involvement activities must identify all individuals and groups who have a stake in the cleanup. Their participation must be early, substantive, and meaningful. Stockholders must be able to see how their input was considered and used, and feel that a good- faith effort was made to reconcile conflicting objectives. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is a Department of Energy Office of Technology Development project located at Hanford. Along with technical evaluation of innovative cleanup technologies, the program is conducting an institutional assessment of regulatory and public acceptance of new technologies. Through a series of interviews and workshops, and use of a computerized information management tool, stakeholders are having a voice in the evaluation. Public and regulatory reaction has been positive

Federal Highway Administration research and technology evaluation final report : Eco-Logical

Science.gov (United States)

2018-03-01

This report documents an evaluation of Federal Highway Administrations (FHWA) Research and Technology Programs activities on the implementation of the Eco-Logical approach by State transportation departments and metropolitan planning organizati...

Department of Accelerator Physics and Technology: Overview

International Nuclear Information System (INIS)

Pachan, M.

2000-01-01

Full text: The principal Department's duties in 1999 have not changed and were consequently directed on development in the area of electron and ion accelerators and their applications in science, medicine and technology. Two important events dominated the current and future orientation of R and D activity. The first was finalizing of long time efforts for preparing of the ordered research project granted by the State Committee of Scientific Research and devoted to elaboration and design of a new electron accelerator for radiotherapy, with two energies of X-ray photon beams. This project was formally approved in March 1999 and due to organisatory procedures set in operation after few months. In the second half of 1999, an important progress was done in advancing the project. The second mentioned event is foundation by the government of a Multiyear Research Programme - called ''Isotopes and Accelerators''. This programme formulates a broad spectrum of important tasks oriented on application of isotopes and accelerator techniques in many branches of science and national economy. The expected participation of the Department in this programme comprises following subjects: medical interoperative accelerator, high power electron accelerator for radiation technology, and upgrading of cyclotron for isotopes production. In course of 1999, preparatory studies in these subjects were carried out. Some of the results were presented on conferences and seminars. An interesting experience was the expertise done on technical status of Eindhoven isochronous cyclotron and its possible transfer to Swierk as a professional tool for isotopes production. In the group of medical applications, three subjects were continued during 1999 and brought important results: - completion of microwave measurements of high gradient acceleration structure for low energy accelerators; such structure will be very useful solution for Co-Line and interoperative accelerator; - evaluation of design data and

Energy technology evaluation report: Energy security

Science.gov (United States)

Koopman, R.; Lamont, A.; Schock, R.

1992-09-01

Energy security was identified in the National Energy Strategy (NES) as a major issue for the Department of Energy (DOE). As part of a process designed by the DOE to identify technologies important to implementing the NES, an expert working group was convened to consider which technologies can best contribute to reducing the nation's economic vulnerability to future disruptions of world oil supplies, the working definition of energy security. Other working groups were established to deal with economic growth, environmental quality, and technical foundations. Energy Security working group members were chosen to represent as broad a spectrum of energy supply and end-use technologies as possible and were selected for their established reputations as experienced experts with an ability to be objective. The time available for this evaluation was very short. The group evaluated technologies using criteria taken from the NES which can be summarized for energy security as follows: diversifying sources of world oil supply so as to decrease the increasing monopoly status of the Persian Gulf region; reducing the importance of oil use in the US economy to diminish the impact of future disruptions in oil supply; and increasing the preparedness of the US to deal with oil supply disruptions by having alternatives available at a known price. The result of the first phase of the evaluation process was the identification of technology groups determined to be clearly important for reducing US vulnerability to oil supply disruptions. The important technologies were mostly within the high leverage areas of oil and gas supply and transportation demand but also included hydrogen utilization, biomass, diversion resistant nuclear power, and substitute industrial feedstocks.

Evaluation of tubular reactor designs for supercritical water oxidation of U.S. Department of Energy mixed waste

International Nuclear Information System (INIS)

Barnes, C.M.

1994-12-01

Supercritical water oxidation (SCWO) is an emerging technology for industrial waste treatment and is being developed for treatment of the US Department of Energy (DOE) mixed hazardous and radioactive wastes. In the SCWO process, wastes containing organic material are oxidized in the presence of water at conditions of temperature and pressure above the critical point of water, 374 C and 22.1 MPa. DOE mixed wastes consist of a broad spectrum of liquids, sludges, and solids containing a wide variety of organic components plus inorganic components including radionuclides. This report is a review and evaluation of tubular reactor designs for supercritical water oxidation of US Department of Energy mixed waste. Tubular reactors are evaluated against requirements for treatment of US Department of Energy mixed waste. Requirements that play major roles in the evaluation include achieving acceptable corrosion, deposition, and heat removal rates. A general evaluation is made of tubular reactors and specific reactors are discussed. Based on the evaluations, recommendations are made regarding continued development of supercritical water oxidation reactors for US Department of Energy mixed waste

DOE evaluates nine alternative thermal technologies for treatment of mixed waste

International Nuclear Information System (INIS)

Anon.

1995-01-01

In June 1993, the U.S. Department of Energy's (DOE's) Office of Technology Development commissioned a study to evaluate 19 thermal technologies for treating DOE's mixed waste. The study was divided into two phases: Phase I evaluated ten conventional incineration techniques (primarily rotary kiln), and Phase II looked at nine innovative, alternative thermal treatment technologies. The treatment processes were evaluated as part of an integrated waste treatment system, which would include all of the facilities, equipment, and methods required to treat and dispose DOE mixed waste. The relative merits and life-cycle costs were then developed for each of the 19 waste treatment systems evaluated. The study also identified the additional research and development, demonstration, and testing/evaluation steps that would be necessary for the waste treatment systems to successfully treat DOE mixed waste. 3 tabs., 2 refs

The United States Department of Energy Office of Industrial Technology`s Technology Benefits Recording System

Energy Technology Data Exchange (ETDEWEB)

Hughes, K.R.; Moore, N.L.

1994-09-01

The U.S. Department of Energy (DOE) Office of Industrial Technology`s (OIT`s) Technology Benefits Recording System (TBRS) was developed by Pacific Northwest Laboratory (PNL). The TBRS is used to organize and maintain records of the benefits accrued from the use of technologies developed with the assistance of OIT. OIT has had a sustained emphasis on technology deployment. While individual program managers have specific technology deployment goals for each of their ongoing programs, the Office has also established a separate Technology Deployment Division whose mission is to assist program managers and research and development partners commercialize technologies. As part of this effort, the Technology Deployment Division developed an energy-tracking task which has been performed by PNL since 1977. The goal of the energy-tracking task is to accurately assess the energy savings impact of OIT-developed technologies. In previous years, information on OIT-sponsored technologies existed in a variety of forms--first as a hardcopy, then electronically in several spreadsheet formats that existed in multiple software programs. The TBRS was created in 1993 for OIT and was based on information collected in all previous years from numerous industrial contacts, vendors, and plants that have installed OIT-sponsored technologies. The TBRS contains information on technologies commercialized between 1977 and the present, as well as information on emerging technologies in the late development/early commercialization stage of the technology life cycle. For each technology, details on the number of units sold and the energy saved are available on a year-by-year basis. Information regarding environmental benefits, productivity and competitiveness benefits, or impact that the technology may have had on employment is also available.

An Evaluative Case Study on Professional Competency of Preservice Information Technology Teachers

Science.gov (United States)

Kabakci Yurdakul, Isil

2011-01-01

The purpose of this study is to evaluate preservice Information Technology (IT) teachers' professional competency in the teaching process. The study was designed on the basis of evaluative case study. The participants of the study consisted of seven preservice IT teachers attending the department of Computer Education and Instructional…

MINERGY CORPORATION GLASS FURNACE TECHNOLOGY EVALUATION: INNOVATION TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

This report presents performance and economic data for a U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program demonstration of the Minergy Corporation (Minergy) Glass Furnace Technology (GFT). The demonstration evaluated the techno...

Department of Energy Technology. Annual Progress Report 1 January - 31 December 1982

DEFF Research Database (Denmark)

Risø National Laboratory, Roskilde

The general development of the Department of Energy Technology at Risø during 1982 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included.......The general development of the Department of Energy Technology at Risø during 1982 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included....

1992 update of US EPA's Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program

International Nuclear Information System (INIS)

Lewis, N.M.; Barkley, N.P.; Williams, T.

1992-01-01

The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies for use at hazardous waste sites for five years. The ETP was established under the Superfund Amendments and Reauthorization Act (SARA) of 1986. The ETP complies with the goal of the SITE Program to promote, accelerate and make commercially available the development of alternative/innovative treatment technologies for use at Superfund sites. Technologies are submitted to the ETP through yearly solicitations for Preproposals. Applicants are asked to submit a detailed project proposal and a cooperative agreement application that requires Developer/EPA cost sharing. EPA co-funds selected Developers for one to two years. Second-year funding requires documentation of significant progress during the first year. Facilities, equipment, data collection, performance and development are monitored throughout the project. The US Department of Energy (DOE) and the US Air Force (USAF) are participants in the ETP. DOE has co-funded ETP projects since 1990 and the USAF since 1991. A goal of the ETP is to move developed technologies to the field-demonstration stage. A developer may be considered for participation in the SITE Demonstration Program if performance in the ETP indicates the technology is field-ready for evaluation. Six technology categories: biological, chemical, materials handling, physical, solidification/stabilization and thermal, are presently in the ETP. Technologies of primary interest to EPA are those that can treat complex mixtures of hazardous organic and inorganic contaminants and provide improved solids handling and/or pretreatment. An account of the background and progress of the ETP's first five years is presented in this paper. Technologies currently in the ETP are noted, and developers and EPA Project Managers, are listed. 4 refs., 11 figs., 6 tabs

Cyber security evaluation of II&C technologies

Energy Technology Data Exchange (ETDEWEB)

Thomas, Ken [Idaho National Laboratory (INL), Idaho Falls, ID (United States)

2014-11-01

The Light Water Reactor Sustainability (LWRS) Program is a research and development program sponsored by the Department of Energy, which is conducted in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Within the LWRS Program, the Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. The II&C Pathway is conducted by Idaho National Laboratory (INL). Cyber security is a common concern among nuclear utilities and other nuclear industry stakeholders regarding the digital technologies that are being developed under this program. This concern extends to the point of calling into question whether these types of technologies could ever be deployed in nuclear plants given the possibility that the information in them can be compromised and the technologies themselves can potentially be exploited to serve as attack vectors for adversaries. To this end, a cyber security evaluation has been conducted of these technologies to determine whether they constitute a threat beyond what the nuclear plants already manage within their regulatory-required cyber security programs. Specifically, the evaluation is based on NEI 08-09, which is the industry’s template for cyber security programs and evaluations, accepted by the Nuclear Regulatory Commission (NRC) as responsive to the requirements of the nuclear power plant cyber security regulation found in 10 CFR 73.54. The evaluation was conducted by a

U.S. Department of Energy national technology information exchange workshops

International Nuclear Information System (INIS)

Daub, G.J.; Earle, S.D.; Smibert, A.M.; Wight, E.H.

1994-01-01

The U.S. Department of Energy National Technology Information Exchange (TIE) Workshops bring together environmental restoration and technology development personnel to exchange and share problems, needs, technological solutions, ideas, and successes and failures from lessons learned at DOE sites. The success of this forum is measured by the knowledge gained, contacts made, and program dollars saved by the people who actually do the work in the field. TIE is a unique opportunity to unite the DOE community and allow individuals to listen and to learn about each others' problems and solutions. By using today's technologies better, the National TIE Workshops help identify and implement cost-effective and appropriate technologies to meet the needs of the DOE environmental restoration program

Utilization of dashboard technology in academic radiology departments: results of a national survey.

Science.gov (United States)

Mansoori, Bahar; Novak, Ronald D; Sivit, Carlos J; Ros, Pablo R

2013-04-01

The aim of this study was to identify the most widely used financial, productivity, and accessibility metrics used by academic radiology departments (ARDs) in a dashboard format via a national survey. The results provide a guide to the selection of preferred or commonly used indicators to facilitate dashboard implementation and use. The study met the criteria for an exemption from institutional review board approval. A cross-sectional survey was conducted using a survey approved by the Society of Chairs of Academic Radiology Departments and sent to its members. The survey was designed to evaluate the adoption, access, and composition of dashboard technology in ARDs, particularly those related to measures of productivity and financial performance. The overall response rate was 42% (56 of 131 members). Sixty-two percent of responding ARDs currently use some form of dashboard technology, but 50% have used this technology for ≤2 years. Sixty-five percent of all ARDs use their dashboard information on a monthly basis. The two dashboard financial indicators most frequently used by ARDs are revenue and actual expenses. Similarly, the two productivity indicators used most widely are total examination volume and examination volume per modality. The two most important access indicators used are report turnaround time and backlog per unit time. Currently, fewer than two-thirds of the responding ARDs use dashboard technology, and one-half have used the technology for ≤2 years. Although some fiscal and productivity indices are more frequently used, there are a diverse number of factors used to measure productivity, finance, access, and other operational parameters in ARD dashboards. Thus, the information provided by each institutional dashboard may be significantly different from that in other ARDs. Copyright © 2013 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Department of Energy Technology. Annual progress report 1 January - 31 December 1989

International Nuclear Information System (INIS)

Micheelsen, B.; Hoejerup, C.F.

1990-09-01

The general development of the Department of Energy Technology at Risoe during 1989 is presented. This year was the last one for the department, as organizational changes at the beginning of 1990 caused a split-up of the sections of the department. The activities within the major fields are described in some detail and lists of staff and publicaltions are included. (author) 10 ills., 29 refs

A study of professional competence for radiological technology department students in Taiwan area

International Nuclear Information System (INIS)

Cheng Kai-Yuan; Hsieh Bor-Tsung; Huang W.

2005-01-01

Recently, so many medical institutions established and the increasing use of the high technological medical imaging equipment, it makes radiological technology become the main instrument for the medical diagnostic and radiation therapy. However, the medical radiological technologies play the important role to operate all the related radiological machines. If they do not use the machines adequately, it will increase the patients' radiation absorbed dose. Then, the whole society health may be influenced. Therefore, constructing the professional competence of the medical radiological technologists is an important course. The purpose of this research are: (1) to construct the index of professional competence with radiological technology students, (2) to discuss the professional competence for the graduates from the department of radiological technology to be the reference for the Ministry of Examination for the license test of radiological technologists, (3) to provide the direction of the radiological technology department development. (author)

Department of Accelerator Physics and Technology: Overview

International Nuclear Information System (INIS)

Plawski, E.

2004-01-01

problems with DKFZ Heidelberg, where she participates in the development so called scanning collimators. As a result of a collaboration with LNF INFN Frascati, apart from two travelling wave RF structures now operated in the CTF3 experiment at CERN, one additional TW structure was made in our Department. It serves as an experimental unit for further study of TW technology. The collaboration with the DESY TESLA-FEL Project during the past years concerned mainly the RF accelerating super-conducting superstructures. This work ended with good results; it was reported in a common international oral session held during PAC2003 in Portland, USA. The superstructures have a chance to be mass-produced if the TESLA Superconducting Collider gets international financial approval. The work on RF vacuum windows upgrading against the multipactor effects in high power couplers was continued at DESY till the end of 2003. The original new technologies of thin TiN coating of ceramic windows were applied using newly constructed coating set-up. The summary of our 2003 results on coating will be presented in the TESLA Report 2004-02. A prerequisite of practising Accelerator Physics is understanding its importance in the wider context. Looking to professional literature on accelerators applications, one finds that in the developed world roughly 20000 accelerators exist (excluding electron units below 0.2 MeV) and yearly this number increases by at least 10%. More than half are used for material modification and roughly 30 % in radiotherapy. The most advanced technically and technologically are accelerators for subatomic physics and synchrotron radiation sources, where the total number of existing or under construction machines surpasses 200. New solutions, new technologies, cost reductions are still being investigated. So, in spite of difficult financial conditions, there is real motivation to keep accelerator physics alive in our Institute. (author)

United States Department Of Energy Office Of Environmental Management Waste Processing Annual Technology Development Report 2008

International Nuclear Information System (INIS)

Bush, S.

2009-01-01

The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

Mixed Waste Integrated Program interim evaluation report on thermal treatment technologies

International Nuclear Information System (INIS)

Gillins, R.L.; DeWitt, L.M.; Wollerman, A.L.

1993-02-01

The Mixed Waste Integrated Program (MWIP) is one of several US Department of Energy (DOE) integrated programs established to organize and coordinate throughout the DOE complex the development of technologies for treatment of specific waste categories. The goal of the MWIP is to develop and deploy appropriate technologies for -the treatment of DOE mixed low-level and alpha-contaminated wastes in order to bring all affected DOE installations and projects into compliance with environmental laws. Evaluation of treatment technologies by the MWIP will focus on meeting waste form performance requirements for disposal. Thermal treatment technologies were an early emphasis for the MWIP because thermal treatment is indicated (or mandated) for many of the hazardous constituents in DOE mixed waste and because these technologies have been widely investigated for these applications. An advisory group, the Thermal Treatment Working Group (TTWG), was formed during the program's infancy to assist the MWIP in evaluating and prioritizing thermal treatment technologies suitable for development. The results of the overall evaluation scoring indicate that the four highest-rated technologies were rotary kilns, slagging kilns, electric-arc furnaces, and plasma-arc furnaces. The four highest-rated technologies were all judged to be applicable on five of the six waste streams and are the only technologies in the evaluation with this distinction. Conclusions as to the superiority of one technology over others are not valid based on this preliminary study, although some general conclusions can be drawn

Evaluation of Technologies for Retrieval of Waste from Leaking Tanks

International Nuclear Information System (INIS)

Bamberger, Judith A.; Hatchell, Brian K.; Lewis, Benjamin E.; Randolph, John D.; Killough, Stephen M.

2000-01-01

The US Department of Energy Environmental and Waste Management Tanks Focus Area selected as a strategic initiative the need to identify and develop technologies for remediation of tanks that are known or are suspected to leak. This investigation identified and evaluated technical options for single-shell tank waste retrieval applicable to retrieve waste from potentially leaking tanks. Technologies that minimize leakage use minimal water, and dry retrieval technologies were evaluated. Safety, cost, authorization basis, and schedule risks were identified for each technology to provide River Protection Program with information to evaluate technical and programmatic risk. A workshop was held to identify technology needs and solutions. These approaches grouped into five categories: those related to waste dislodging, waste conveyance, both waste dislodging and conveyance, the deployment platform, and technologies related to leak detection, monitoring, and mitigation. Based on the ranking, six technologies were selected as potential candidates for further evaluation. These items were prioritized into four technologies to recommend for further evaluation (1) Air assisted TORE(R). The TORE(R) produces a processing vortex core with the ability to convey solids at pre-determined slurry concentrations over great distances. The dry TORE(R) concept uses air to develop the vortex to fluidize dry solids. The TORE(R)the solids in a slurry transport line. (2) Sonication for waste dislodging utilizes ultrasonic energy to fracture and dislodge hard waste types such as salt cake and sludge. (3) Novel long-reach manipulators concept is to investigate novel cost effective approaches for long-reach manipulator technology. (4) Next generation crawler technology envisions a non-umbilical dislodger, possibly radio controlled and powered remotely to provide a deployment platform not affected by path, or the need to retrace steps

US Department of Energy Environmental Cleanup Technology Development program: Business and research opportunities guide

Energy Technology Data Exchange (ETDEWEB)

1993-12-31

The US Department of Energy (DOE) Office of Environmental Restoration and Waste Management (EM) is charged with overseeing a multi-billion dollar environmental cleanup effort. EM leads an aggressive national research, development, demonstration, testing, and evaluation program to provide environmental restoration and waste management technologies to DOE sites, and to manage DOE-generated waste. DOE is firmly committed to working with industry to effectuate this cleanup effort. We recognize that private industry, university, and other research and development programs are valuable sources of technology innovation. The primary purpose of this document is to provide you with information on potential business opportunities in the following technical program areas: Remediation of High-Level Waste Tanks; Characterization, Treatment, and Disposal of Mixed Waste; Migration of Contaminants; Containment of Existing Landfills; Decommissioning and Final Disposition, and Robotics.

Department of Energy Recovery Act Investment in Biomass Technologies

Energy Technology Data Exchange (ETDEWEB)

None

2010-11-01

The American Recovery and Reinvestment Act of 2009 (Recovery Act) provided more than $36 billion to the Department of Energy (DOE) to accelerate work on existing projects, undertake new and transformative research, and deploy clean energy technologies across the nation. Of this funding, $1029 million is supporting innovative work to advance biomass research, development, demonstration, and deployment.

Advancing the US Department of Energy's Technologies through the Underground Storage Tank: Integrated Demonstration Program

International Nuclear Information System (INIS)

Gates, T.E.

1993-01-01

The principal objective of the Underground Storage Tank -- Integrated Demonstration Program is the demonstration and continued development of technologies suitable for the remediation of waste stored in underground storage tanks. The Underground Storage Tank Integrated Demonstration Program is the most complex of the integrated demonstration programs established under the management of the Office of Technology Development. The Program has the following five participating sites: Oak Ridge, Idaho, Fernald, Savannah River, and Hanford. Activities included within the Underground Storage Tank -- Integrated Demonstration are (1) characterizating radioactive and hazardous waste constituents, (2) determining the need and methodology for improving the stability of the waste form, (3) determining the performance requirements, (4) demonstrating barrier performance by instrumented field tests, natural analog studies, and modeling, (5) determining the need and method for destroying and stabilizing hazardous waste constituents, (6) developing and evaluating methods for retrieving, processing (pretreatment and treatment), and storing the waste on an interim basis, and (7) defining and evaluating waste packages, transportation options, and ultimate closure techniques including site restoration. The eventual objective is the transfer of new technologies as a system to full-scale remediation at the US Department of Energy complexes and sites in the private sector

Fusion technology development. Annual report to the US Department of Energy, October 1, 1996--September 30, 1997

International Nuclear Information System (INIS)

1998-03-01

In FY97, the General Atomics (GA) Fusion Group made significant contributions to the technology needs of the magnetic fusion program. The work was supported by the Office of Fusion Energy Sciences, International and Technology Division, of the US Department of Energy. The work is reported in the following sections on Fusion Power Plant Studies (Section 2), Plasma Interactive Materials (Section 3), Magnetic Diagnostic Probes (Section 4) and RF Technology (Section 5). Meetings attended and publications are listed in their respective sections. The overall objective of GA's fusion technology research is to develop the technologies necessary for fusion to move successfully from present-day physics experiments to ITER and other next-generation fusion experiments, and ultimately to fusion power plants. To achieve this overall objective, we carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and we conduct research to develop basic knowledge about these technologies, including plasma technologies, fusion nuclear technologies, and fusion materials. We continue to be committed to the development of fusion power and its commercialization by US industry

Evaluation of alternative nonflame technologies for destruction of hazardous organic waste

International Nuclear Information System (INIS)

Schwinkendorf, W.E.; Musgrave, B.C.; Drake, R.N.

1997-04-01

The US Department of Energy's Mixed Waste Focus Area (MWFA) commissioned an evaluation of mixed waste treatment technologies that are alternatives to incineration for destruction of hazardous organic wastes. The purpose of this effort is to evaluate technologies that are alternatives to open-flame, free-oxygen combustion (as exemplified by incinerators), and recommend to the Waste Type Managers and the MWFA which technologies should be considered for further development. Alternative technologies were defined as those that have the potential to: destroy organic material without use of open-flame reactions with free gas-phase oxygen as the reaction mechanism; reduce the offgas volume and associated contaminants (metals, radionuclides, and particulates) emitted under normal operating conditions; eliminate or reduce the production of dioxins and furans; and reduce the potential for excursions in the process that can lead to accidental release of harmful levels of chemical or radioactive materials. Twenty-three technologies were identified that have the potential for meeting these requirements. These technologies were rated against the categories of performance, readiness for deployment, and environment safety, and health. The top ten technologies that resulted from this evaluation are Steam Reforming, Electron Beam, UV Photo-Oxidation, Ultrasonics, Eco Logic reduction process, Supercritical Water oxidation, Cerium Mediated Electrochemical Oxidation, DETOX SM , Direct Chemical Oxidation (peroxydisulfate), and Neutralization/Hydrolysis

Oil Bypass Filter Technology Performance Evaluation - First Quarterly Report

Energy Technology Data Exchange (ETDEWEB)

Zirker, L.R.; Francfort, J.E.

2003-01-31

This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

Evaluative conditioning of food technologies

DEFF Research Database (Denmark)

Loebnitz, Natascha; Grunert, Klaus G

2015-01-01

Consumer attitudes play an important role in the acceptance of new technologies. The success of food innovations depends on understanding how consumers form and change attitudes toward food technologies. Earlier post hoc explanations suggest that evaluative conditioning can change consumer...... attitudes toward food technologies. The present study tests how evaluative conditioning can affect consumer acceptance of new food technologies. Furthermore, authors investigate whether evaluative conditioning is resistant to extinction after a two-month period and whether the evaluative conditioning effect...... prevails in a product-related context. Within an evaluative conditioning paradigm including between-subjects control groups in addition to standard within-subjects control conditions, participants were presented with three food technologies (conventional, enzyme, and genetic technology) paired...

Evaluating New Technology.

Science.gov (United States)

Carniol, Paul J; Heffelfinger, Ryan N; Grunebaum, Lisa D

2018-05-01

There are multiple complex issues to consider when evaluating any new technology. First evaluate the efficacy of the device. Then considering your patient population decide whether this technology brings an added benefit to your patients. If it meets these 2 criteria, then proceed to the financial analysis of acquiring this technology. The complete financial analysis has several important components that include but are not limited to cost, value, alternatives, return on investment, and associated marketing expense. Copyright © 2018 Elsevier Inc. All rights reserved.

U.S. Department of Energy Hydrogen and Fuel Cells Program 2011 Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

Satypal, S.

2011-09-01

This document summarizes the comments provided by peer reviewers on hydrogen and fuel cell projects presented at the FY 2011 U.S. Department of Energy (DOE) Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting (AMR), held May 9-13, 2011 in Arlington, Virginia

Technology application analyses at five Department of Energy Sites

International Nuclear Information System (INIS)

1995-05-01

The Hazardous Waste Remedial Actions Program (HAZWRAP), a division of Lockheed Martin Energy Systems, Inc., managing contractor for the Department of Energy (DOE) facilities in Oak Ridge, Tennessee, was tasked by the United States Air Force (USAF) through an Interagency Agreement between DOE and the USAF, to provide five Technology Application Analysis Reports to the USAF. These reports were to provide information about DOE sites that have volatile organic compounds contaminating soil or ground water and how the sites have been remediated. The sites were using either a pump-and-treat technology or an alternative to pump-and-treat. The USAF was looking at the DOE sites for lessons learned that could be applied to Department of Defense (DoD) problems in an effort to communicate throughout the government system. The five reports were part of a larger project undertaken by the USAF to look at over 30 sites. Many of the sites were DoD sites, but some were in the private sector. The five DOE projects selected to be reviewed came from three sites: the Savannah River Site (SRS), the Kansas City Site, and Lawrence Livermore National Laboratory (LLNL). SRS and LLNL provided two projects each. Both provided a standard pump-and-treat application as well as an innovative technology that is an alternative to pump-and-treat. The five reports on these sites have previously been published separately. This volume combines them to give the reader an overview of the whole project

Department of Nuclear Equipment 'High Technology Center - HITEC' - Overview

International Nuclear Information System (INIS)

Kopec, J.

2009-01-01

Full text: The main activities of the Department for Nuclear Equipment High Technology Centre in 2008 were focused on the development of specialized systems using linear accelerators for medical applications, realized within the frame of the Innovative Economy Operational Program: · Calculations, simulations and design of accelerator structures and beam shaping devices · Design of a model of carrying structures · Building stands for carrying out critical component examinations and tests A new evolutionary algorithm has been implemented in a three-dimensional treatment planning system for intensity modulated radiotherapy (IMRT) planning optimization. A design for a multi leaf collimator, second model, was worked out. The Department received an Award for the Polkam TBI therapeutic table in the first edition of the '' Teraz-Polska '' national contest for the best Polish innovative product. Equipment manufactured by the High Technology Centre and especially for total body irradiation techniques was presented for the first time during the Biennial Meeting of the European Society for Therapeutic Radiology and Oncology in Goeteborg, Sweden. The second edition of the School of Medical Accelerator Physics organized in October 2008 was well received by medical physicists and physicians. (author)

Soil washing technology evaluation

International Nuclear Information System (INIS)

Suer, A.

1995-04-01

Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2008

Energy Technology Data Exchange (ETDEWEB)

Bush, S.

2009-11-05

The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

Science and Technology of Nanostructures in the Department of Defense

International Nuclear Information System (INIS)

Murday, James S.

1999-01-01

The United States Department of Defense maintains a research and development program in nanostructures with special attention to miniaturization of information technology devices, nanostructured materials, and nanobiotechnology for detection of biological agents. This article provides a brief guide to those DoD funding officers and research scientists actively interested in nanostructures

A challenge for higher education: Wearable technology for fashion design departments

Directory of Open Access Journals (Sweden)

Elif Buğra Kuzu Demir

2016-04-01

Full Text Available As the technology is integrated into different disciplines, we witness how powerful it can be. Rather than standing in isolation, technology changes the nature of the field it arrives in. Wearable technologies in fashion design education is a good example for this. Wearable technology defined as lightweight, easy portable and wearable smart devices that have sensors and computing capabilities. The structure of wearable technologies has brought a new trend to fashion design area. Fashion design, as known to be a very dynamic application area, has already accepted the issue and started using the most powerful examples of wearable technologies already. However, although the stages are using wearable technologies, the schools that graduate fashion designers of the future are far beyond the capacity of the stages. It is therefore; this paper brings suggestions for the integration of technology into fashion design departments in Turkey and while doing this it tries to be country specific.

Evaluation of alternative nonflame technologies for destruction of hazardous organic waste

Energy Technology Data Exchange (ETDEWEB)

Schwinkendorf, W.E. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States); Musgrave, B.C. [BC Musgrave, Inc. (United States); Drake, R.N. [Drake Engineering, Inc. (United States)

1997-04-01

The US Department of Energy`s Mixed Waste Focus Area (MWFA) commissioned an evaluation of mixed waste treatment technologies that are alternatives to incineration for destruction of hazardous organic wastes. The purpose of this effort is to evaluate technologies that are alternatives to open-flame, free-oxygen combustion (as exemplified by incinerators), and recommend to the Waste Type Managers and the MWFA which technologies should be considered for further development. Alternative technologies were defined as those that have the potential to: destroy organic material without use of open-flame reactions with free gas-phase oxygen as the reaction mechanism; reduce the offgas volume and associated contaminants (metals, radionuclides, and particulates) emitted under normal operating conditions; eliminate or reduce the production of dioxins and furans; and reduce the potential for excursions in the process that can lead to accidental release of harmful levels of chemical or radioactive materials. Twenty-three technologies were identified that have the potential for meeting these requirements. These technologies were rated against the categories of performance, readiness for deployment, and environment safety, and health. The top ten technologies that resulted from this evaluation are Steam Reforming, Electron Beam, UV Photo-Oxidation, Ultrasonics, Eco Logic reduction process, Supercritical Water oxidation, Cerium Mediated Electrochemical Oxidation, DETOX{sup SM}, Direct Chemical Oxidation (peroxydisulfate), and Neutralization/Hydrolysis.

Evaluating Technology Transfer and Diffusion.

Science.gov (United States)

Bozeman, Barry; And Others

1988-01-01

Four articles discuss the evaluation of technology transfer and diffusion: (1) "Technology Transfer at the U.S. National Laboratories: A Framework for Evaluation"; (2) "Application of Social Psychological and Evaluation Research: Lessons from Energy Information Programs"; (3) "Technology and Knowledge Transfer in Energy R and D Laboratories: An…

A proposed framework for establishing integrated cost and performance criteria for environmental technologies. A summary report to the U.S. Department of Energy

International Nuclear Information System (INIS)

1994-05-01

Through an Interagency Agreement between the US Environmental Protection Agency (EPA) and the US Department of Energy (DOE), EPA directed a project to establish a suite of standard cost and performance criteria to guide the evaluation of environmental cleanup technologies for DOE sites. Ideally, these criteria would be ''generic'' in that they could be used as a basis for evaluating any cleanup technology for any DOE site. To be most useful, however, these criteria would also reflect the interests of diverse decisionmakers who influence DOE technology evaluation. The project was conducted by the National Environmental Technology Applications Center (NETAC), a nonprofit organization specializing in the development and commercialization of new and innovative environmental technologies for national and international markets. To accomplish the project objective, NETAC (1) developed a data gathering questionnaire, (2) interviewed government and industry decisionmakers, (3) identified previous criteria development efforts, (4) conducted a workshop, (5) evaluated workshop discussions, and (6) applied its five years' experience in commercializing environmental technologies to analyze project findings. The project resulted in the development of a unique and comprehensive resource or tool to enhance communication among decisionmakers. This resource, a ''Proposed Framework for Establishing Integrated Cost and Performance Criteria for Evaluating Environmental Cleanup Technologies for DOE Sites,'' offers decisionmakers a first-time comprehensive assessment of major technology evaluation issues by a decisionmaker group

Evaluation of Performance Indexes of Emergency Department

Directory of Open Access Journals (Sweden)

Alireza Baratloo

2015-02-01

Full Text Available Introduction: The importance of evaluating performance indicators in the emergency department, as one of the most important departments of hospital, is obvious to everyone. Therefore, in this study we aimed to appraise the five performance indicators, approved by the ministry of health, in Shohadaye Tajrish hospital, Tehran, Iran. Methods: In a descriptive cross-sectional study based on the profiles of all the patients admitted to the emergency department, performance indicators in the emergency department were evaluated. The study was divided into 2 parts about the establishment of emergency medicine system and training the medical staff: the first 6 months of 1392 and the second. Then these 2 periods were compared using Mann-Whitney U test while P< 0.05 was considered as the level of significance. Results: Of the studied indicators, mean triage time was 6.04 minutes in the first 6 months which was reduced to 1.5 minutes in the second 6 months (p=0.016. In addition, the percentage of patients who moved out of the department in 12 hours was lowered from 97.3% in the first period to 90.4% in the second (p=0.004. While, the percentage of patients who were decided upon in 6 hours (p=0.2, unsuccessful CPR percentage (p=0.34 and patients discharged against medical advice (p=0.42 showed no significant difference. Conclusion: The results of this study showed that the establishment of the emergency medicine system in the emergency department could lead to more efficient triage. Due to the differences made after their establishment including: different pattern of the patients admitted, increased stay of the patients in the department due to their need for prolonged intensive care, a raise in patient referral to the hospital by pre-hospital services and a higher percentage of occupied hospital beds, other indicators have not shown a significant improvement.

In Situ Remediation Integrated Program, Evaluation and assessment of containment technology

International Nuclear Information System (INIS)

Gerber, M.A.; Fayer, M.J.

1994-04-01

The In Situ Remediation Integrated Program (ISRIP) was established by the US Department of Energy (DOE) to advance the state-of-the art of innovative in situ remediation technologies to the point of demonstration and to broaden the applicability of these technologies to the widely varying site remediation requirements throughout the DOE complex. This program complements similar ongoing integrated demonstration programs being conducted at several DOE sites. The ISRIP has been conducting baseline assessments on in situ technologies to support program planning. Pacific Northwest Laboratory conducted an assessment and evaluation of subsurface containment barrier technology in support of ISRIP's Containment Technology Subprogram. This report summarizes the results of that activity and provides a recommendation for priortizing areas in which additional research and development is needed to advance the technology to the point of demonstration in support of DOE's site restoration activities

Development of coal-based technologies for Department of Defense Facilities. Semiannual technical progress report, March 28, 1997--September 27, 1997

Energy Technology Data Exchange (ETDEWEB)

Miller, B.G.; Miller, S.F.; Morrison, J.L. [and others

1998-01-06

The U.S. Department of Defense (DOD), through an Interagency Agreement with the U.S. Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of developing technologies which can potentially decrease DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE. Phase I was completed on November 1, 1995. Work in Phase II focused on emissions reductions, coal beneficiation/preparation studies, and economic analyses of coal use. Emissions reductions investigations included performing pilot-scale air toxics (i.e., trace elements and volatile organic compounds) testing and evaluating a ceramic filtering device on the demonstration boiler. Also, a sodium bicarbonate duct injection system was installed on the demonstration boiler. An economic analysis was conducted which investigated the benefits of decreased dependence on imported oil by using new coal combustion technologies. Work related to coal preparation and utilization was primarily focused on preparing the final report. Work in Phase III focused on coal preparation studies, pilot-scale NO{sub x} reduction studies, economic analyses of coal use, and evaluation of deeply-cleaned coal as boiler fuel. Coal preparation studies were focused on continuing activities on particle size control, physical separations, and surface-based separation processes. The evaluation of deeply-cleaned coal as boiler fuel included receiving three cleaned coals from Cyprus-Amax.

Low-Temperature Projects of the Department of Energy's Geothermal Technologies Program: Evaluation and Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

Williams, Tom; Snyder, Neil; Gosnold, Will

2016-10-23

This paper discusses opportunities and challenges related to the technical and economic feasibility of developing power generation from geothermal resources at temperatures of 150 degrees C and lower. Insights from projects funded by the U.S. Department of Energy (DOE), Geothermal Technologies Office inform these discussions and provide the basis for some lessons learned to help guide decisions by DOE and the industry in further developing this resource. The technical basis for low-temperature geothermal energy is well established and the systems can be economic today in certain situations. However, these applications are far from a 'plug and play' product; successful development today requires a good knowledge of geothermal system design and operation.

Environmental control technology activities of the Department of Energy in FY 1977

International Nuclear Information System (INIS)

1977-11-01

The Department of Energy is responsible for the research, development, and demonstration of emerging energy technologies and the promotion of energy conservation. An integral and significant part of that responsibility includes the balancing of energy goals with environmental requirements to protect and enhance the general health, safety, and welfare of the nation. This requires that environmental effects be considered and mitigating measures be taken in all energy processes through incorporation of environmental and safety controls which are developed as an integral part of energy system design. This inventory of environmental control technology activities was initiated by the Administrator, ERDA, prior to the incorporation of that administration within the Department of Energy. This compilation of total Energy Research and Development Administration (ERDA) environmental control technology activities, and associated funding, related to environmental control technology identifies the resources committed by ERDA to demonstrate its objective to protect and enhance the general health, safety, and welfare of the nation in the research, development, and demonstration of energy systems. Only ERDA research, development, and demonstration activities are covered in this report. The compilation for FY 1978 will encompass all of the DOE activities

Oil Bypass Filter Technology Performance Evaluation - January 2003 Quarterly Report

Energy Technology Data Exchange (ETDEWEB)

Laurence R. Zirker; James E. Francfort

2003-01-01

This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

Technology development, evaluation, and application (TDEA) FY 1997 progress report

Energy Technology Data Exchange (ETDEWEB)

Hoffman, L.G.

1998-05-01

The public expects that the Los Alamos National Laboratory (LANL) will operate in a manner that prevents negative impacts to the environment and protects the safety and health of its employees and the public. To achieve this goal within budget, the Department of Energy (DOE) and LANL must develop new and improved environment, safety, and health (ES and H) technologies and implement innovative, more cost-effective ES and H approaches to operations. In FY95, the Environment, Safety, and Health (ESH) Division initiated a Technology Development, Evaluation, and Application (TDEA) program. The purpose of this unique program is to test and develop technologies that solve LANL ES and H problems and improve the safety of LANL operations. This progress report presents the results of 10 projects funded in FY97 by the TDEA Committee of the Environment, Safety, and Health Division. Products generated from the projects funded in FY97 included implementation of radiation worker dosimetric monitoring systems (two); evaluation and validation of cost-effective animal-tracking systems for environmental studies (two); evaluation of personal protective equipment (two); and development of a method for optimal placement of continuous air monitors in the workplace.

Technology development, evaluation, and application (TDEA) FY 1997 progress report

International Nuclear Information System (INIS)

Hoffman, L.G.

1998-05-01

The public expects that the Los Alamos National Laboratory (LANL) will operate in a manner that prevents negative impacts to the environment and protects the safety and health of its employees and the public. To achieve this goal within budget, the Department of Energy (DOE) and LANL must develop new and improved environment, safety, and health (ES and H) technologies and implement innovative, more cost-effective ES and H approaches to operations. In FY95, the Environment, Safety, and Health (ESH) Division initiated a Technology Development, Evaluation, and Application (TDEA) program. The purpose of this unique program is to test and develop technologies that solve LANL ES and H problems and improve the safety of LANL operations. This progress report presents the results of 10 projects funded in FY97 by the TDEA Committee of the Environment, Safety, and Health Division. Products generated from the projects funded in FY97 included implementation of radiation worker dosimetric monitoring systems (two); evaluation and validation of cost-effective animal-tracking systems for environmental studies (two); evaluation of personal protective equipment (two); and development of a method for optimal placement of continuous air monitors in the workplace

Evaluation and Selection of Renewable Energy Technologies for Highway Maintenance Facilities

Science.gov (United States)

Andrews, Taylor

The interest in renewable energy has been increasing in recent years as attempts to reduce energy costs as well the consumption of fossil fuels are becoming more common. Companies and organizations are recognizing the increasing reliance on limited fossil fuels' resources, and as competition and costs for these resources grow, alternative solutions are becoming more appealing. Many federally run buildings and associations also have the added pressure of meeting the mandates of federal energy policies that dictate specific savings or reductions. Federal highway maintenance facilities run by the Department of Transportation fall into this category. To help meet energy saving goals, an investigation into potential renewable energy technologies was completed for the Ohio Department of Transportation. This research examined several types of renewable energy technologies and the major factors that affect their performance and evaluated their potential for implementation at highway maintenance facilities. Facilities energy usage data were provided, and a facility survey and site visits were completed to enhance the evaluation of technologies and the suitability for specific projects. Findings and technology recommendations were presented in the form of selection matrices, which were designed to help make selections in future projects. The benefits of utilization of other tools such as analysis software and life cycle assessments were also highlighted. These selection tools were designed to be helpful guides when beginning the pursuit of a renewable energy technology for highway maintenance facilities, and can be applied to other similar building types and projects. This document further discusses the research strategies and findings as well as the recommendations that were made to the personnel overseeing Ohio's highway maintenance facilities.

Progress report 1 January - 31 December 1988. Department of Information Technology

International Nuclear Information System (INIS)

1989-04-01

This progress report describes the work carried out in the Department of Information Technology. The department comprises three sections. The Applied Laser Physics Section works in the areas of holographic optical elements, optical image processing, and the photorefractive effect. The Computer Section is primarily responsible for the central computer facilities and computer networks at Risoe. The Section for Information Processing and Cognitive Science, Sicos, is concerned with cognitive science, decision support, knowledge-based systems, and process simulation. Information given may be preliminary. (author) 1 tab., 9 ills., 46 refs

Microbial Monitoring from the Frontlines to Space: Department of Defense Small Business Innovation Research Technology Aboard the International Space Station

Science.gov (United States)

Oubre, Cherie M.; Khodadad, Christina L.; Castro, Victoria A.; Ott, C. Mark; Flint, Stephanie; Pollack, Lawrence P.; Roman, Monserrate C.

2017-01-01

The RAZOR (trademark) EX, a quantitative Polymerase Chain Reaction (qPCR) instrument, is a portable, ruggedized unit that was designed for the Department of Defense (DoD) with its reagent chemistries traceable to a Small Business Innovation Research (SBIR) contract beginning in 2002. The PCR instrument's primary function post 9/11 was to enable frontline soldiers and first responders to detect biological threat agents and bioterrorism activities in remote locations to include field environments. With its success for DoD, the instrument has also been employed by other governmental agencies including Department of Homeland Security (DHS). The RAZOR (Trademark) EX underwent stringent testing by the vendor, as well as through the DoD, and was certified in 2005. In addition, the RAZOR (trademark) EX passed DHS security sponsored Stakeholder Panel on Agent Detection Assays (SPADA) rigorous evaluation in 2011. The identification and quantitation of microbial pathogens is necessary both on the ground as well as during spaceflight to maintain the health of astronauts and to prevent biofouling of equipment. Currently, culture-based monitoring technology has been adequate for short-term spaceflight missions but may not be robust enough to meet the requirements for long-duration missions. During a NASA-sponsored workshop in 2011, it was determined that the more traditional culture-based method should be replaced or supplemented with more robust technologies. NASA scientists began investigating innovative molecular technologies for future space exploration and as a result, PCR was recommended. Shortly after, NASA sponsored market research in 2012 to identify and review current, commercial, cutting edge PCR technologies for potential applicability to spaceflight operations. Scientists identified and extensively evaluated three candidate technologies with the potential to function in microgravity. After a thorough voice-of-the-customer trade study and extensive functional and

76 FR 30696 - Technology Evaluation Process

Science.gov (United States)

2011-05-26

...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... (DOE) seeks comments and information related to a commercial buildings technology evaluation process... evaluation efforts. The goal of creating this standard process is to evaluate energy-saving technologies in a...

SBIR and STTR Program for Assistive Technology Device Development: Evaluation of Impact Using an ICF-Based Classification

Science.gov (United States)

Bauer, Stephen M.; Arthanat, Sajay

2010-01-01

The purpose of this paper was to evaluate the impact of Small Business Innovation Research (SBIR) and Small Business Technology Transfer Research (STTR) grant programs of 5 federal agencies National Institutes of Health (NIH), National Science Foundation (NSF), U.S. Department of Education (USDE), U.S. Department of Agriculture (USDA), and…

Evaluation of technologies for remediation of disposed radioactive and hazardous wastes in a facility at the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Reno, H.W.; Martin, D.D.; Rasmussen, T.L.

1989-01-01

For the past twenty years the US Department of Energy has been investigating and evaluating technologies for the long term management of disposed transuranic contaminated wastes at the Radioactive Waste Management Complex of the Idaho National Engineering Laboratory. More than fifty technologies have been investigated and evaluated and three technologies have been selected for feasibility study demonstration at the complex. This paper discusses the evaluation of those technologies and describes the three technologies selected for demonstration. The paper further suggests that future actions under the Comprehensive Environmental Response, Compensation, and Liability Act should build from previous evaluations completed heretofore. 18 refs., 3 figs., 1 tab

Department of Energy Technology annual progress report 1 January - 31 December 1984

International Nuclear Information System (INIS)

Micheelsen, B.; List, F.

1985-02-01

The general development of the Department of Technology at Risoe during 1984 is presented, and the activities within the major subject fields are described in some detail. Lists of staff and publications are included. (author)

Department of Energy Technology annual progress report 1 January - 31 December 1985

International Nuclear Information System (INIS)

Micheelsen, B.; List, F.

1986-02-01

The general development of the Department of Energy Technology at Risoe during 1985 is presented, and the activities within the major subject fields are described in some detail. Lists of staff and publications are included. (author)

Department of energy technology annual progress report 1 January - 31 December 1986

International Nuclear Information System (INIS)

Micheelsen, B.; List, F.

1987-02-01

The general development of the Department of Energy Technology at Risoe during 1986 is presented, and the activities within the major subject fields are described in some detail. Lists of staff and publications are included. (author)

Department of energy technology. Annual progress report 1 January - 31 December 1983

International Nuclear Information System (INIS)

1984-01-01

The general development of the Department of Energy Technology at Risoe during 1983 is presented, and the activities within the major subject fields are described in some detail. Lists of staff and publications are included. (author)

Public participation in the evaluation of innovative environmental cleanup technology

International Nuclear Information System (INIS)

Peterson, T.; McCabe, G.; Serie, P.; Niesen, K.

1994-08-01

Technologies for remediation of contamination are urgently needed to clean up US Department of Energy (DOE) sites across the country. DOE is managing a national program to develop, demonstrate, and deploy new technologies with promise to expedite this cleanup. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is one such effort. Time and resources, however, are too limited to be invested in methods of remediation that will never be deployed because they have not been rigorously evaluated or because they face the withering opposition of stakeholders. Therefore the VOC-Arid ID is assessing technology both in terms of its technical effectiveness and its stakeholder acceptability. Only if a technology performs as required and is acceptable to regulators, users of technology, and the public will the VOC-Arid ID recommend its use. What distinguishes public involvement in the VOC-Arid ID is the direct influence stakeholders have on the design of technology demonstrations by working directly with technology developers. Stakeholders participated in defining the criteria with which innovative environmental cleanup technology is being evaluated. The integrated demonstration is committed to providing stakeholders with the information they've indicated they need to reach reasoned judgments about the use of specific cleanup technologies. A guiding principle of the VOC-Arid ID is that stakeholder participation improves the technologies being developed, enhances the acceptance of the technologies, and will lead to the broad and timely deployment of appropriate and effective methods of environmental remediation. The VOC-Arid ID has involved stakeholders from the host demonstration site, Hanford, Washington, and from other and sites where the ID technologies may be deployed

Evaluation of automated vehicle technology for transit.

Science.gov (United States)

2015-01-01

The purpose of this report is to provide an overview of the state of automated vehicle (AV) technology : in transit. The Florida Department of Transportation (FDOT) wishes to know what AV technology is : currently available that could be used in tran...

76 FR 37344 - Technology Evaluation Process

Science.gov (United States)

2011-06-27

...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... seeks comments and information related to a commercial buildings technology evaluation process. DOE is seeking to create a process for evaluating emerging and underutilized energy efficient technologies for...

76 FR 56406 - Science and Technology Reinvention Laboratory Demonstration Project; Department of the Army; Army...

Science.gov (United States)

2011-09-13

... DEPARTMENT OF DEFENSE Office of the Secretary Science and Technology Reinvention Laboratory Demonstration Project; Department of the Army; Army Research, Development and Engineering Command; Tank... personnel management demonstration project for eligible TARDEC employees. Within that notice the table...

Pathways to Commercial Success: Technologies and Innovations Enabled by the U.S. Department of Energy Fuel Cell Technologies Office

Energy Technology Data Exchange (ETDEWEB)

None, None

2017-10-11

This report published in October 2017 updates the results of an effort to identify and document the commercial and emerging (projected to be commercialized within the next 3 to 5 years) hydrogen and fuel cell technologies and products that resulted from U.S. Department of Energy support through the Fuel Cell Technologies Office in the Office of Energy Efficiency and Renewable Energy.

Recent activities of the nuclear fuel technology department of Cekmece Nuclear Research and Training Center

International Nuclear Information System (INIS)

Can, S.; Aybers, T.; Kopuz, B.

1997-01-01

The Nuclear Fuel Technology Department (NFTD) in CNRTC is a unique unit in Turkey in charge of performing all activities in nuclear fuel field. It has a pilot plant on uranium refining and conversion to UO 2 since 1986. Presently, its R and D activities are focused on pellet manufacturing and characterization: UO 2 , ThO 2 and (Th,U)O 2 . The studies on thorium dioxide fuel include to obtain ThO 2 pellets from thorium nitrate and mixed (Th,U)O 2 pellets. A study on evaluation of different fuel cycle options in accordance with nuclear energy planning in Turkey is also going on. (author)

Evaluation of the US Department of Energy Weatherization Innovation Pilot Program (2010-2014)

Energy Technology Data Exchange (ETDEWEB)

Tonn, Bruce Edward [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rose, Erin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hawkins, Beth A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-05-01

This report contains results from analysis conducted on each of the Weatherization Innovation Pilot Program (WIPP) grants awarded to 16 organizations by the US Department of Energy (DOE) in 2010. The purpose of WIPP was to explore the potential adoptability or replicability of innovative processes or technologies for the enhancement of DOE’s Weatherization Assistance Program (WAP). DOE initiated the WIPP grant to accelerate effective innovations in home energy efficiency and other WAP mission-related goals for income-qualifying households of low socioeconomic status. This study was performed alongside a broader, national evaluation of WAP conducted by Oak Ridge National Laboratory (ORNL) for DOE.

New technologies and surgical innovation: five years of a local health technology assessment program in a surgical department.

Science.gov (United States)

Poulin, Paule; Austen, Lea; Kortbeek, John B; Lafrenière, René

2012-06-01

There is pressure for surgical departments to introduce new and innovative health technologies in an evidence-based manner while ensuring that they are safe and effective and can be managed with available resources. A local health technology assessment (HTA) program was developed to systematically integrate research evidence with local operational management information and to make recommendations for subsequent decision by the departmental executive committee about whether and under what conditions the technology will be used. The authors present a retrospective analysis of the outcomes of this program as used by the Department of Surgery & Surgical Services in the Calgary Health Region over a 5-year period from December 2005 to December 2010. Of the 68 technologies requested, 15 applications were incomplete and dropped, 12 were approved, 3 were approved for a single case on an urgent/emergent basis, 21 were approved for "clinical audit" for a restricted number of cases with outcomes review, 14 were approved for research use only, and 3 were referred to additional review bodies. Subsequent outcome reports resulted in at least 5 technologies being dropped for failure to perform. Decisions based on local HTA program recommendations were rarely "yes" or "no." Rather, many technologies were given restricted approval with full approval contingent on satisfying certain conditions such as clinical outcomes review, training protocol development, or funding. Thus, innovation could be supported while ensuring safety and effectiveness. This local HTA program can be adapted to a variety of settings and can help bridge the gap between evidence and practice.

Department of Energy Technology. Annual progress report 1 Jan - 31 Dec 1987

International Nuclear Information System (INIS)

Micheelsen, B.; List, F.

1988-03-01

The general development of the Department of Energy Technology at Risoe during 1987 is presented, and the activities within the major subject fields are described in some detail. Lists of staff and publications and included. 13 ills., 24 refs. (author)

Low-Temperature Projects of the Department of Energy's Geothermal Technologies Program: Evaluation and Lessons Learned: Preprint

Energy Technology Data Exchange (ETDEWEB)

Williams, Tom; Snyder, Neil; Gosnold, Will

2016-12-01

This paper discusses opportunities and challenges related to the technical and economic feasibility of developing power generation from geothermal resources at temperatures of 150 degrees C and lower. Insights from projects funded by the U.S. Department of Energy (DOE), Geothermal Technologies Office inform these discussions and provide the basis for some lessons learned to help guide decisions by DOE and the industry in further developing this resource. The technical basis for low-temperature geothermal energy is well established and the systems can be economic today in certain situations. However, these applications are far from a 'plug and play' product; successful development today requires a good knowledge of geothermal system design and operation.

Evaluation of Aqua-Ammonia Chiller Technologies and Field Site Installation

Energy Technology Data Exchange (ETDEWEB)

Zaltash, Abdolreza [ORNL

2007-09-01

The Naval Facilities Engineering Service Center (NFESC) has sponsored Oak Ridge National Laboratory (ORNL) to review, select, and evaluate advanced, gas-fired, 5-ton, aqua-ammonia, chiller technologies. The selection criteria was that units have COP values of 0.67 or better at Air-conditioning and Refrigeration Institute (ARI) 95 F outdoor rating conditions, an active refrigerant flow control, and a variable-speed condenser fan. These features are expected to allow these units to operate at higher ambient temperatures (up to the maximum operating temperature of 110 F) with minimal degradation in performance. ORNL evaluated three potential manufacturers of advanced, gas-fired, 5-ton, aqua-ammonia chillers-Robur, Ambian, and Cooling Technologies. Unfortunately, Robur did not meet the COP requirements and Cooling Technologies could not deliver a unit to be tested at the U.S. Department of Energy (DOE)-ORNL environmental chamber testing facility for thermally activated heat pumps. This eliminated these two technologies from further consideration, leaving only the Ambian chillers for evaluation. Two Ambian chillers were evaluated at the DOE-ORNL test facility. Overall these chillers operated well over a wide range of ambient conditions with minimal degradation in performance due to several control strategies used such as a variable speed condenser fan, a modulating burner, and active refrigerant flow control. These Ambian pre-commercial units were selected for installation and field testing at three federal facilities. NFESC worked with ORNL to assist with the site selection for installation and evaluation of these chillers. Two sites (ORNL and Naval Surface Warfare Center [NSWC] Corona) had a single chiller unit installed; and at one site (Naval Amphibious Base [NAB] Little Creek), two 5-ton chillers linked together were installed to provide 10 tons of cooling. A chiller link controller developed under this project was evaluated in the field test at Little Creek.

The value of adding regional to local stakeholder involvement in evaluating the acceptability of innovative technologies

International Nuclear Information System (INIS)

Peterson, T.S.; McCabe, G.; Niesen, K.; Serie, P.

1995-02-01

Technology is urgently needed to clean up contamination by volatile organic compounds at United States Department of Energy (DOE) sites. In many cases, however, existing technology is too slow, inefficient, or expensive. The record of technology development is, in some cases, similarly disappointing. Remediation technologies developed at great expense and evaluated piecemeal over long periods have not been deployed because, in the end, the public judged them ineffective or unacceptable. The need for successful methods of remediation is too great and resources too limited to continue with ineffective technology evaluation. In order to make good decisions about which technologies to deploy, remedial project managers need to know stakeholders' requirements for the performance of proposed technologies. Expanding stakeholder involvement regionally identifies the concerns of a broad range of stakeholders at and DOE sites throughout the West -- issues that must be taken into account if technologies are to be accepted for wide deployment

Department of Plasma Physics and Technology - Overview

International Nuclear Information System (INIS)

Sadowski, M.J.

2006-01-01

In 2005 research activities in Department P-V were concentrated on the continuation of previous studies in the field of plasma physics and CNF, but new investigations were also undertaken, particularly in the field of plasma technology. The main tasks were as follows: 1. Studies of physical phenomena in pulsed discharges producing dense magnetized plasma; 2. Development of methods and tools for high-temperature plasma diagnostics; 3. Research in the field of plasma technologies. As to the first task, particular attention was paid to studies of X-ray pulses and pulsed electron beams, by means of different diagnostic techniques. Measurements of the polarization of the selected X-ray spectral lines and their correlation with pulsed e-beams were performed in the MAJA-PF facility. Taking into account microscopic irreproducibility of so-called 'hot-spots', particular efforts were devoted to the correlation of the X-ray emission from a single hot-spot with corresponding non-thermal electron pulses. Some observations of X-rays were performed also at the PF-1000 facility at IPPLM in Warsaw. Other studies concerned the correlation of fast-neutron pulses with X-rays and other corpuscular emissions. Results of experimental studies carried out in the IPJ-IPPLM collaboration were analyzed and summarized. New measurements, carried out in the MAJA-PF facility, determined the temporal correlation of X-rays pulses, fusion-neutrons, fast electron beams and high-energy ion beams. Other efforts concerned studies of fast (ripple-born) electrons in tokamaks. An analysis of the capability of special Cerenkov-type detectors (based on diamond-crystal radiators) was performed, and measuring heads for the CASTOR and TORE-SUPRA facilities have been designed. Concerning the development of plasma diagnostic techniques, characteristics of PM-355 nuclear track detectors were analyzed and the calibrated detectors (with appropriate absorption filters) were used for measurements of fast (> 3 Me

The development of coal-based technologies for Department of Defense facilities. Semiannual technical progress report, March 28, 1994--September 27, 1994

Energy Technology Data Exchange (ETDEWEB)

Miller, B.G.; Bartley, D.A.; Morrison, J.L. [and others

1995-04-14

The US Department of Defense (DOD), through an Interagency Agreement with the US Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal Water Slurry Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE and the first two phases of the program are underway. Activities this reporting period included performing coal beneficiation/preparation studies, conducting combustion performance evaluations, preparing retrofit engineering designs, determining retrofit economics, and installing a micronized coal-water mixture (MCWM) circuit.

A Training Technology Evaluation Tool

National Research Council Canada - National Science Library

Livingston, Stephen C; Dyer, Jean L; Swinson, Diadra

2005-01-01

A Training Technology Evaluation Tool was developed to help procurers and developers of training technologies to make informed decisions and to improve the overall effectiveness of training technologies...

Department of Accelerator Physics And Technology - Overview

International Nuclear Information System (INIS)

Plawski, E.

2009-01-01

Full text: The activity of department P-10 is focused on the development of new acceleration techniques and technology, as well as on applications of particle accelerators. In 2008, the following topics were investigated and/or realized: 1. A linear accelerator for protons called TOP (Terapia Oncologica con Protoni, Oncological Proton Therapy). Basically a proton linac of modified Alvarez type working at 3000 MHz frequency and delivering beams in the energy range from 65 MeV to 200 MeV. In 2005, a contract was signed between ENEA and SINS-Swierk for the design, manufacture and delivery to Frascati of the input section of a 65 MeV linac. This section of SCDTL type will increase the proton energy from 7 to 16 MeV. In 2008, the field distribution in the manufactured structure was measured and optimized using available universal test stand. Measurements were also performed in ENEA/Frascati in October; a small difference in results, around 0.25%, is under investigation. Beam dynamics calculations using 3D codes have been started in parallel. 2. Preparation for participation in the international X-FEL project. Calculations of the parasitic Higher Order Modes (HOMs) induced in superconducting accelerating structures by very short electron bunches have been continued. Thanks to the special research grant received by department P-10 the design and completion of the HOM elements has been started for two accelerating modules, where each module consists of eight superconducting accelerating structures and focusing/correcting elements. 3. Superconducting layers; studies in INFN-Roma. Within the European CARE/JRA1/WP4-2 project, serious modification of the Nb-coating stand for the 1.3 GHz single-cell copper resonators using a vacuum arc was performed. Thanks to this stand the internal surface of the resonator was successfully coated. 4. TiN coating vacuum stand for RF components. At this stand the analysis of the TiN layer thickness as a function of reactive atmosphere pressure

Evaluating technology service options.

Science.gov (United States)

Blumberg, D F

1997-05-01

Four service and support options are available to healthcare organizations for maintaining their growth arsenals of medical and information technology. These options include maintaining and servicing all equipment using a facility-based biomedical engineering and MIS service department; using a combination of facility-based service and subcontracted service; expanding facility-based biomedical and MIS service departments to provide service to other healthcare organizations to achieve economies of scale; and outsourcing all maintenance, repair, and technical support services. Independent service companies and original equipment manufacturers (OEMs) are offering healthcare organizations a wider array of service and support capabilities than ever before. However, some health systems have successfully developed their own independent service organizations to take care of their own--and other healthcare organizations'--service and support needs.

IMPACT OF TECHNOLOGICAL DEVELOPMENT ON BUSINESS EFFICIENCY IN THE FOOD AND BEVERAGE DEPARTMENT

Directory of Open Access Journals (Sweden)

Slobodan Ivanovic

2015-12-01

Full Text Available Technological development has a great significance in the hospitality industry, specifically in the food and beverage department, and particularly in the differentiation of supply and price leadership. Technological development through the 20th century and the beginning of the 21st century led to a revolution in many fields, like communication, computer sciences to the monitoring of operations and better organization. The use of modern technological solutions affects the workforce, but it must be taken into account that the devices and equipment cannot compensate for the skills, knowledge, expertise and creativity of employees, so use of such devices and equipment decreases the need for unskilled and semiskilled workers. Innovations in the food and beverage department are important for competitive differentiation, but also innovations in the hospitality industry are always at risk as they can easily be copied and imitated, which leads the company to further innovation and improvement of services. Standardization of the working procedures, handling the groceries, binds the usage of technological solutions that allow standardization during the work, which regulates the number of employees needed, energy consumption, lower waste, with increased hygiene and cleanliness of the working process and greater effectiveness and cost efficiency for the company itself.

Mr. Pat McDonald, Director of "Key Business Technologies", Department of Trade and Industry, United Kingdom

CERN Multimedia

Maximilien Brice

2002-01-01

Photos 01,02: Mr Pat McDonald, Director of "Key Business Technologies", Department of Trade and Industry, UK (third from left, front) in front of the ATLAS End-Cap Toroid vacuum vessel in the ATLAS assembly hall with, from left to right, Fred Wickens, Chris Jones, Peter Fletcher, Ray Browne, Neil Geddes, Jim Fleming, Anne Trefethen, Jim Wilson, Edwin Towndrow, Sharon Bonfield, Guy Rickett, Ken Smith, Peter Jenni. Photo 03: Mr Pat McDonald, Director of "Key Business Technologies", Department of Trade and Industry, UK (fifth from left) visiting ATLAS assembly hall with, from left to right, Jim Wilson, Peter Jenni, Ken Smith, Edwin Towndrow, Ray Brown, Chris Jones, Neil Geddes, Sharon Bonfield, Anne Trefethen, Jim Fleming, Fred Wickens. Photo 04: Mr Pat McDonald, Director of "Key Business Technologies", Department of Trade and Industry, UK (fourth from right) in front of the ATLAS Barrel Toroid coil casing in the ATLAS assembly hall with, from left to right, Peter Jenni, Jim Wilson, Guy Rickett, Anne Trefethen, ...

US Department of Energy interim mixed waste inventory report: Waste streams, treatment capacities and technologies

International Nuclear Information System (INIS)

1993-04-01

The United States Department of Energy (DOE) has prepared this report to provide an inventory of its mixed wastes and treatment capacities and technologies in response to section 3021(a) of the Resource Conservation and Recovery Act (RCRA), as amended by section 105(a) of the Federal Facility Compliance Act (FFCA) of 1992 (Pub. L. No. 102-386). DOE has prepared this report for submission to EPA and the States in which DOE stores, generates, or treats mixed wastes. As required by the FFCA, this report contains: a national inventory of all mixed wastes in the DOE system that are currently stored or will be generated over the next five years, including waste stream name, description, EPA waste codes, basis for characterization (i.e., sampling and analysis or process knowledge), effect of radionuclides on treatment, quantity stored that is subject to the Land Disposal Restrictions (LDRs) storage prohibition, quantity stored that is not subject to the LDRS, expected generation over the next five years, Best Demonstrated Available Technology (BDAT) used for developing the LDR requirements, and waste minimization activities; and a national inventory of mixed waste treatment capacities and technologies, including information such as the descriptions, capacities, and locations of all existing and proposed treatment facilities, explanations for not including certain existing facilities in capacity evaluations, information to support decisions on unavailability of treatment technologies for certain mixed wastes, and the planned technology development activities

DEPARTMENT OF ENERGY SOIL AND GROUNDWATER SCIENCE AND TECHNOLOGY NEEDS, PLANS AND INITIATIVES

Energy Technology Data Exchange (ETDEWEB)

Aylward, B; V. ADAMS, V; G. M. CHAMBERLAIN, G; T. L. STEWART, T

2007-12-12

This paper presents the process used by the Department of Energy (DOE) Environmental Management (EM) Program to collect and prioritize DOE soil and groundwater site science and technology needs, develop and document strategic plans within the EM Engineering and Technology Roadmap, and establish specific program and project initiatives for inclusion in the EM Multi-Year Program Plan. The paper also presents brief summaries of the goals and objectives for the established soil and groundwater initiatives.

Report of the evaluation by the Ad Hoc Review Committee on Information Technology. In-advance evaluation in fiscal year 2000

International Nuclear Information System (INIS)

2001-06-01

The Research Evaluation Committee, which consisted of 14 members from outside of the Japan Atomic Energy Research Institute (JAERI), set up an Ad Hoc Review Committee on Information Technology in accordance with the Fundamental Guideline for the Evaluation of Research and Development (R and D) at JAERI' and its subsidiary regulations in order to evaluate the adequacy of the R and D programs pertaining to the establishment and utilization of the Information Technology Based Laboratory (ITBL) to be implemented for five years starting in Fiscal Year 2001 at Center for Promotion of Computational Science and Engineering and Department of Environmental Sciences of JAERI. The Ad Hoc Review Committee consisted of eight specialists from outside of JAERI. The Ad Hoc Review Committee conducted its activities from February to March 2001. The evaluation was performed on the basis of the materials submitted in advance and of the oral presentations made at the Ad Hoc Review Committee meeting which was held on February 9, 2001, in line with the items, viewpoints, and criteria for the evaluation specified by the Research Evaluation Committee. The result of the evaluation by the Ad Hoc Review Committee was submitted to the Research Evaluation Committee, and was judged to be appropriate at its meeting held on March 16, 2001. This report describes the result of the evaluation by the Ad Hoc Review Committee on Information Technology. (author)

An assessment of thermal destruction technologies for application to Department of Energy mixed wastes

International Nuclear Information System (INIS)

1991-08-01

A study of known operational and emerging thermal treatment technologies was conducted for the Department of Energy's (DOE's) Office of Technology Development (OTD) through the Hazardous Waste Remedial Actions Program (HAZWRAP). This study addressed thermal treatment of mixed wastes (MWs), for which the most comprehensive set of waste has been divided into two volumes. Volume 1 contains the details and results of the technology assessments and comparisons between technologies. This volume (Volume 2) contains the comprehensive data collected on each technology, including descriptions, process and cost data, comments on advantages and deficiencies, types of waste treatable and by-products of these wastes, and reference information. 2 figs

Department of ractor technology: Annual progress report 1 January-31 December 1975

International Nuclear Information System (INIS)

1976-01-01

The work of the Department of Reactor Technology within the following fields is described: Reactor engineering, Steel pressure vessel research, Reliability, Reactor physics, Steady-state thermohydraulics, Accident analysis, Containment analysis, Experimental heat transfer, Core dynamicsand power plant simulators, Experimental activation measurements and neutron radiography at the DR 1 reactor. (B.M.)

Department of Reactor Technology annual progress report 1 January - 31 December 1978

International Nuclear Information System (INIS)

1979-04-01

The activities of the department of reactor technology at Risoe during 1978 are described. The work is presented in five chapters: Reactor Engineering, Reactor Physics and Dynamics, Heat Transfer and Hydraulics, The DR 1 Reactor, and Non-Nuclear Activities. A list of the staff and of publications is included. (author)

Evaluating Internal Technological Capabilities in Energy Companies

Directory of Open Access Journals (Sweden)

Mingook Lee

2016-03-01

Full Text Available As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsistent results when different models are used. To solve these problems, this paper proposes a comprehensive framework for evaluating technological capabilities in energy companies by considering the complex properties of technological knowledge. For this purpose, we first explored various factors affecting technological capabilities and divided the factors into three categories: individual, organizational, and technology competitiveness. Second, we identified appropriate evaluation items for each category to measure the technological capability. Finally, by using a hybrid approach of qualitative and quantitative methods, we developed an evaluation method for each item and suggested a method to combine the results. The proposed framework was then verified with an energy generation and supply company to investigate its practicality. As one of the earliest attempts to evaluate multi-faceted technological capabilities, the suggested model can support technology and strategic planning.

Internal evaluation of public health department of Semnan university of medical sciences

Directory of Open Access Journals (Sweden)

Behrad Pour- Mohammadi

2011-10-01

Full Text Available Introduction: Internal evaluation is a fundamental determinant to quality development in teachingdepartments and faculties. The purpose of this study was an internal departmental evaluation in the publichealth department of Semnan university of medical sciences (SUMS.Materials and Methods: This work was performed (during 2008-2009 in department of public health ofSUMS utilizing an accreditation model. The assessment covered 9 areas, namely: educational missions andobjectives, management and organization, educational programs, scientific board, students, educationalresources, research activities, assessment and evaluation, and graduates. Questionnaires were developed bythe scientific members of the department. After collecting the data, results were categorized according toGourman scoring scale, from unsatisfied class to very strong class, with the range of 1-5 scores.Results: The mean scores in the 9 evaluation areas were obtained and the rankings were as below:Educational programs area was in strong ranking; educational missions and objectives, scientific board,and assessment and evaluation areas were in good ranking; management and organization area was in morethan satisfied ranking; students area was in satisfied ranking; educational resources and research activitiesareas were in borderline ranking; and finally, the department was ranked as unsatisfied in the graduatesarea.Conclusions: Results showed that by achieved mean of 3.19 in whole of the evaluation areas, the publichealth department has placed in "more than satisfied" class. Although the overall status is acceptable, thereis a need to modify the weak points in the suboptimal areas to improve the educational quality in thisdepartment.

Semi-annual report of the Mineral Technology Department from CDTN - July to December 1988

International Nuclear Information System (INIS)

Coelho, S.V.; Fernandes, M.D.; Golcalves, J.R.; Murta, R.L.L.

1989-01-01

The activities developed by the Mineral Technology Department of CDTN during 1988, in the area of chemical analysis, mineralogy, petrography and studies about mineral characterization are described. (E.G.) [pt

U.S. Department of Energy Hydrogen and Fuel Cells Program: 2017 Annual Merit Review and Peer Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

Popovich, Neil A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-10-18

The fiscal year 2017 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting (AMR), in conjunction with DOE's Vehicle Technologies Office AMR, was held from June June 5-9, 2017, in Washington, D.C. This report is a summary of comments by AMR peer reviewers about the hydrogen and fuel cell projects funded by DOE's Office of Energy Efficiency and Renewable Energy.

Development of coal-based technologies for Department of Defense Facilities. Semiannual technical progress report, September 28, 1996--March 27, 1997

Energy Technology Data Exchange (ETDEWEB)

Miller, B.G.; Miller, S.F.; Pisupati, S.V. [and others

1997-07-22

The U.S. Department of Defense (DOD), through an Interagency Agreement with the U.S. Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of developing technologies which can potentially decrease DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE. Work in Phase II focused on emissions reductions, coal beneficiation/preparation studies, and economic analyses of coal use. Work in Phase III focused on coal preparation studies, pilot-scale NO{sub x} reduction studies, economic analyses of coal use, and evaluation of deeply-cleaned coal as boiler fuel. Coal preparation studies were focused on continuing activities on particle size control, physical separations, surface-based separation processes, and dry processing. Preliminary pilot-scale NO{sub x} reduction catalyst tests were conducted when firing natural gas in Penn State`s down-fired combustor. This is the first step in the scale-up of bench-scale results obtained in Phase II to the demonstration boiler scale when firing coal. The economic study focused on community sensitivity to coal usage, regional/national economic impacts of new coal utilization technologies, and constructing a national energy portfolio. The evaluation of deeply-cleaned coal as boiler fuel included installing a ribbon mixer into Penn State`s micronized coal-water mixture circuit for reentraining filter cake. In addition, three cleaned coals were received from CQ Inc. and three cleaned coals were received from Cyprus-Amax.

Integration of New Technology for Research in the Emergency Department: Feasibility of Deploying a Robotic Assessment Tool for Mild Traumatic Brain Injury Evaluation.

Science.gov (United States)

Subbian, Vignesh; Ratcliff, Jonathan J; Meunier, Jason M; Korfhagen, Joseph J; Beyette, Fred R; Shaw, George J

2015-01-01

The objective of this paper is to demonstrate the effective deployment of a robotic assessment tool for the evaluation of mild traumatic brain injury (mTBI) patients in a busy, resource-constrained, urban emergency department (ED). Functional integration of new robotic technology for research in the ED presented several obstacles that required a multidisciplinary approach, including participation from electrical and computer engineers, emergency medicine clinicians, and clinical operations staff of the hospital. Our team addressed many challenges in deployment of this advanced technology including: 1) adapting the investigational device for the unique clinical environment; 2) acquisition and maintenance of appropriate testing space for point-of-care assessment; and 3) dedicated technical support and upkeep of the device. Upon successful placement of the robotic device in the ED, the clinical study required screening of all patients presenting to the ED with complaints of head injury. Eligible patients were enrolled and tested using a robot-assisted test battery. Three weeks after the injury, patients were contacted to complete follow-up assessments. Adapting the existing technology to meet anticipated physical constraints of the ED was performed by engineering a mobile platform. Due to the large footprint of the device, it was frequently moved before ultimately being fully integrated into the ED. Over 14 months, 1423 patients were screened. Twenty-eight patients could not be enrolled because the device was unavailable due to operations limitations. Technical problems with the device resulted in failure to include 20 patients. A total of 66 mTBI patients were enrolled and 42 of them completed both robot-assisted testing and follow-up assessment. Successful completion of screening and enrollment demonstrated that the challenges associated with integration of investigational devices into the ED can be effectively addressed through a collaborative patient

An analysis of the implementation of problem-based learning at the Department of Energy Technology – Aalborg University

DEFF Research Database (Denmark)

Silva, Filipe Miguel Faria da

2016-01-01

increases students’ motivation and improves their performance resulting in better grades when comparing with traditional teaching methods. Engineering curriculums at AAU are organised in projects (i.e. problem-based) and courses (i.e. lecture-based). However, there are no systematic studies evaluating how...... well students do in projects and courses, and their perceptions on the respective assessments. This paper evaluates the AAU PBL model, based on a statistical analysis of the grades obtained by students from the department of Energy Technology, together with answers given by these students in an online....... A possible area for curriculum improvement, consisting in changing the project content at the first years of bachelor, is also evaluated. The results show that the projects have consistently higher grades than courses and a lower failure rate. The students agree that PBL improves the learning of technical...

76 FR 34215 - Notice of Department of Energy-Quadrennial Technology Review Capstone Workshop

Science.gov (United States)

2011-06-13

... Council of Advisors on Science & Technology. This Administration's national energy goals are to: Reduce..., 2011)], the Department requested public comment on the questions related to the DOE-QTR and the framing... framing document: In the mobile sector, these are vehicle efficiency, electrification, and advanced fuels...

Technology Evaluation for Environmental Risk Mitigation Compendium

Science.gov (United States)

Meinhold, A.; Greene, B.; Dussich, J.; Sorkin, A.; Olsen, W.

2017-01-01

The Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center and its predecessor organization the Acquisition Pollution Prevention Program (AP2) supported the National Aeronautics and Space Administration (NASA) in identifying technology solutions to risks and costs to NASA programs driven by environmental regulations and requirements. TEERM researched the commercial and government marketplace to locate viable and available technologies that met NASAs needs. TEERM focused on addressing environmentally-driven risks of direct concern to NASA programs and facilities, including hazardous materials in NASA operations and materials that became obsolescent because of environmental regulations. TEERM projects aimed to reduce cost; ensure the health and safety of people, assets, and the environment; promote efficiency; and minimize duplication. Major TEERM and AP2 projects focused on waste minimization and hazardous waste treatment, recycling, corrosion prevention and control, solvent and ozone depleting substances substitution, and aqueous based cleaners. In 2017, NASA made the decision to terminate the TEERM Principal Center. This Compendium Report documents TEERM and AP2 project successes. The Compendium Report traces the evolution of TEERM based on evolving risks and requirements for NASA and its relationship to the Space Shuttle Program, the United States Department of Defense, the European Space Agency, and other public and private stakeholders. This Compendium Report also documents project details from Project Summaries and Joint Test Plans and describes project stakeholders and collaborative effort results.

Evaluation of the cleaner technology programme

DEFF Research Database (Denmark)

Andersen, Mikael Skou; Jørgensen, Ulrik

The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination...... of the dissemination of cleaner technology solutions achieved in six industrial branches, and on the overall programme and its effects, in particular environmental impacts, but also results in the form of employment, environmental export, strenghtening of Danish know-how etc....

Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

Energy Technology Data Exchange (ETDEWEB)

Moore, E.B.

1984-10-01

The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables.

Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

International Nuclear Information System (INIS)

Moore, E.B.

1984-10-01

The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables

Evaluating the Impact of Information Technology Tools to Support the Asthma Medical Home.

Science.gov (United States)

Matiz, L Adriana; Robbins-Milne, Laura; Krause, M Christine; Peretz, Patricia J; Rausch, John C

2016-02-01

This study aimed to evaluate the impact of information technology tools on the outcomes of children with asthma in the medical home. A registry was established for children aged 4 to 18 years with an ICD-9 code for asthma. Changes to the electronic health record included modifications to notes, care plans, and orders. A retrospective analysis of emergency department and in-patient utilization for a cohort of patients was conducted from July 2009 through June 2013. Of the study population (n = 1217), 65% had a classification of asthma severity and 63% were risk-stratified. Seventy percent had a control assessment at least once. Care plan use increased from 5% to 22% and enrollment in care coordination increased from 0.1% to 4%. After 3 years, there was a reduction of emergency department and inpatient admissions for asthma (P information technology tools was associated with improved asthma outcomes. © The Author(s) 2015.

Information Technology (IT) Ethics: Training and Awareness Materials for the Department of the Navy

National Research Council Canada - National Science Library

Senter, Jasper

2002-01-01

Information ethics is a relatively new field of study that aims to identify and to analyze the impact technology has on society, personal values, and the application of ethics in cyberspace The Department of the Navy (DoN...

Technologies for security, military police, and professional policing organizations: the Department of Energy perspective

Science.gov (United States)

Steele, Basil J.

1997-01-01

There are many emerging technologies that can be used to help the law enforcement community protect the public as well as public and private facilities against ever increasing threats to this country and its resources. These technologies include sensors, closed circuit television (CCTV), access control, contraband detection, communications, control and display, barriers, and various component and system modeling techniques. This paper will introduce some of the various technologies that have been examined for the Department of Energy that could be applied to various law enforcement applications. They include: scannerless laser radar; next generation security systems; response force video information helmet system; access delay technologies; rapidly deployable intrusion detection systems; cost risk benefit analysis.

Overview of Chromium Remediation Technology Evaluations At The Hanford Site, Richland Washington

Science.gov (United States)

Morse, J. G.; Hanson, J. P.

2009-12-01

This paper will present an overview of the different technologies and the results to date for optimizing and improving the remediation of Cr+6 in the soil and groundwater at the Hanford Site. The Hanford Site, par of the U.S. Department of Energy's (DOE)nuclear weapons complex, encompasses approximately 586 square miles in southeast Washington State. The Columbia River flows through the site (Hanford Reach.) Reactors were located along the Hanford Reach as part of the production process. Sodium dichromate was used as a corrosion inhibitor in the cooling water for the reactors. As a result chromium (Cr+6) is present in the soil and groundwater. Since the mid 90's interim groundwater pump and treat systems have been in place to try and contain or mitigate the migration of contaminated groundwater into the Columbia River. The primary concern being the protection of aquatic spawning habitat for salmon and other species. In order to improve the effectiveness of the remedial actions a number of different technologies have been evaluated and/or deployed. These include, permeable reactive barriers, in-situ bio-stimulation, in-situ chemical reduction, zero-valent iron injection and evaluation of improved above ground treatment technologies. An overview of the technologies and results to date are presented.

Technology evaluation for time sensitive data transport

DEFF Research Database (Denmark)

Wessing, Henrik; Breach, Tony; Colmenero, Alberto

. The NREN communities must provide underlying network infrastructures and transport technologies to facilitate ser-vices with such requirements to the network. In this paper we investigate and evaluate circuit and packet based transport technologies from classic best effort IP over MPLS flavours, Provider...... Backbone Bridging (PBB), “Transparent Interconnect of Lots of Links” (TRILL) to Optical Transport Network (OTN) and SDH. The transport technologies are evaluated theoreti-cally, using simulations and/or experimentally. Each transport technology is evaluated based on its performances and capabilities...... overhead and restoration time. Thirdly, complexity and automation possibilities for establishment of paths for high demanding applica-tions, and finally how the technologies are backed by research communities and major vendors like Ciena, Alcatel-Lucent, Nokia-Siemens and Huawei. The technologies...

Development of inspection safety evaluation technology

Energy Technology Data Exchange (ETDEWEB)

Yoon, Seok Chul; Yoon, Yeo Chang; Kim, Jong Soo; Lee, Tae Young; Kim, Chang Ryol; Lee, Hyung Sub; Kim, Jong Soo

1995-12-01

The purpose of this project is to protection nation inspector`s over exposure from radiation that can be occurred by inspection activity at nuclear facilities and its environment, and to ensure the safety of inspection activity at the nuclear facilities. To effectively carry out the domestic inspection task to be enforced from 1996, the evaluation for special radiation exposure rate of nuclear facilities, air and surface contamination level, and measurement and monitoring of water contamination level were made to determine whether these measured values exceeded permissible limitations, and to protect the inspector`s over exposure from radiation at domestic nuclear facilities. Management of inspector`s exposure was carried out under assistance of the Department of Health Physics. Performance tests of two gamma detectors, one neutron detector, alpha and beta detector, and gamma spectroscopy analyzer were carried out to control dose on extremity, the characteristic test for extremity dosimeter was carried out and the theoretical calculation of gamma dose conversion factors based on ANSI N13.32 standard was performed. Under the 93+2 program, IAEA began to recognize the necessity of environmental observation technology development of air-borne particulates travelled from long distance location. Associated with the necessity of this technology development, a proposal of international joint research for development of the special radiation measurement and analysis has been prepared. (author). 21 tabs., 24 figs., 20 refs.

Pilot demonstrations of arsenic treatment technologies in U.S. Department of Energy Arsenic Water Technology Partnership program.

Energy Technology Data Exchange (ETDEWEB)

Everett, Randy L.; Aragon, Alicia R.; Siegal Malcolm D.; Dwyer, Brian P.

2005-01-01

The Arsenic Water Technology Partnership program is a multi-year program funded by a congressional appropriation through the Department of Energy. The program is designed to move technologies from benchscale tests to field demonstrations. It will enable water utilities, particularly those serving small, rural communities and Indian tribes, to implement the most cost-effective solutions to their arsenic treatment needs. As part of the Arsenic Water Technology Partnership program, Sandia National Laboratories is carrying out field demonstration testing of innovative technologies that have the potential to substantially reduce the costs associated with arsenic removal from drinking water. The scope for this work includes: (1) Selection of sites and identification of technologies for pilot demonstrations; (2) Laboratory studies to develop rapid small-scale test methods; and (3) Pilot-scale studies at community sites involving side-by-side tests of innovative technologies. The goal of site selection is to identify sites that allow examination of treatment processes and systems under conditions that are relevant to different geochemical settings throughout the country. A number of candidate sites have been identified through reviews of groundwater quality databases, conference proceedings and discussions with state and local officials. These include sites in New Mexico, Arizona, Colorado, Oklahoma, Michigan, and California. Candidate technologies for the pilot tests are being reviewed through vendor forums, proof-of-principle benchscale studies managed by the American Water Works Association Research Foundation (AwwaRF) and the WERC design contest. The review considers as many potential technologies as possible and screens out unsuitable ones by considering data from past performance testing, expected costs, complexity of operation and maturity of the technology. The pilot test configurations will depend on the site-specific conditions such as access, power availability

Technologies for security, military police and professional policing organizations, the Department of Energy perspective

International Nuclear Information System (INIS)

Steele, B.J.

1996-01-01

There are many technologies emerging from this decade that can be used to help the law enforcement community protect the public as well as public and private facilities against ever increasing threats to this country and its resources. These technologies include sensors, closed circuit television (CCTV), access control, contraband detection, communications, control and display, barriers, and various component and system modeling techniques. This paper will introduce some of the various technologies that have been examined for the Department of Energy that could be applied to various law enforcement applications. They include: (1) scannerless laser radar; (2) next generation security systems; (3) response force video information helmet system; (4) access delay technologies; (5) rapidly deployable intrusion detection systems; and (6) cost risk benefit analysis

UNITED STATES DEPARTMENT OF ENERGY WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2007

Energy Technology Data Exchange (ETDEWEB)

Bush, S

2008-08-12

The Office of Environmental Management's (EM) Roadmap, U.S. Department of Energy--Office of Environmental Management Engineering & Technology Roadmap (Roadmap), defines the Department's intent to reduce the technical risk and uncertainty in its cleanup programs. The unique nature of many of the remaining facilities will require a strong and responsive engineering and technology program to improve worker and public safety, and reduce costs and environmental impacts while completing the cleanup program. The technical risks and uncertainties associated with cleanup program were identified through: (1) project risk assessments, (2) programmatic external technical reviews and technology readiness assessments, and (3) direct site input. In order to address these needs, the technical risks and uncertainties were compiled and divided into the program areas of: Waste Processing, Groundwater and Soil Remediation, and Deactivation and Decommissioning (D&D). Strategic initiatives were then developed within each program area to address the technical risks and uncertainties in that program area. These strategic initiatives were subsequently incorporated into the Roadmap, where they form the strategic framework of the EM Engineering & Technology Program. The EM-21 Multi-Year Program Plan (MYPP) supports the goals and objectives of the Roadmap by providing direction for technology enhancement, development, and demonstrations that will lead to a reduction of technical uncertainties in EM waste processing activities. The current MYPP summarizes the strategic initiatives and the scope of the activities within each initiative that are proposed for the next five years (FY2008-2012) to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. As a result of the importance of reducing technical risk and uncertainty in the EM Waste

Practice-centred evaluation and the privileging of care in health information technology evaluation.

Science.gov (United States)

Darking, Mary; Anson, Rachel; Bravo, Ferdinand; Davis, Julie; Flowers, Steve; Gillingham, Emma; Goldberg, Lawrence; Helliwell, Paul; Henwood, Flis; Hudson, Claire; Latimer, Simon; Lowes, Paul; Stirling, Ian

2014-06-05

Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes. Electronic Patient Records (EPRs) and telemedicine are positioned by policymakers as health information technologies that are integral to achieving improved clinical outcomes and efficiency savings. However, evaluating the extent to which these aims are met poses distinct evaluation challenges, particularly where clinical and cost outcomes form the sole focus of evaluation design. We propose that a practice-centred approach to evaluation - in which those whose day-to-day care practice is altered (or not) by the introduction of new technologies are placed at the centre of evaluation efforts - can complement and in some instances offer advantages over, outcome-centric evaluation models. We carried out a regional programme of innovation in renal services where a participative approach was taken to the introduction of new technologies, including: a regional EPR system and a system to support video clinics. An 'action learning' approach was taken to procurement, pre-implementation planning, implementation, ongoing development and evaluation. Participants included clinicians, technology specialists, patients and external academic researchers. Whilst undergoing these

Nuclear fusion and fission, and related technologies department: 2007 progress report

International Nuclear Information System (INIS)

2007-12-01

ENEA continues to contribute to broadening plasma physics knowledge as well as to developing the relevant technologies in the framework of the EURATOM-ENEA Association for fusion. This report describes the 2007 research activities carried out by the ENEA Fusion Research Group of the Nuclear Fusion and Fission, and Related Technologies Department (FPN). Other ENEA research groups also contributed to the activities. The following fields were addressed: magnetically confined nuclear fusion (physics and technology), superconductivity and inertial fusion. Planning of the 2007 fusion activities took into account the different scenarios determined by the new organisation of the European programme based on the start of ITER construction. The establishment of the ITER International Organisation and the European Domestic Agency (Fusion for Energy) required a new organisational scheme. This has implied not only the implementation of a more project oriented structure but also the need to launch the constitution of a consortium agreement between the Associations in order to cope with the needs for the design and construction of the components of ITER that require specific know-how, e.g., diagnostics and test blanket module

The Relationship between Application of Information, Communication Technology and Organizational Effectiveness in Physical Education Departments of Universities of Tehran

OpenAIRE

Hamid Ghasemi; Abolfazl Farahani; Maryam Mashatan

2012-01-01

The purpose of this study was to determine the relationship between use of information communication technology (ITC) and organizational effectiveness in physical education departments of the University of Tehran carried out through the correlation method and the field research. All employees of Physical Education departments comprised our statistical population of whom 114 were randomly taken as the survey sample. We administered researcher-made information and communication technology (α=0....

Sustainability evaluation of water supply technologies

DEFF Research Database (Denmark)

Godskesen, Berit

Sustainability evaluation of water supply systems is important to include in the decision making process when planning new technologies or resources for water supply. In Denmark the motivations may be many and different for changing technology, but since water supply is based on groundwater...... the main driver is the limitations of the available resource from the groundwater bodies. The environmental impact of products and systems can be evaluated by life-cycle assessment (LCA) which is a comprehensive and dominant decision support tool capable of evaluating a water system from the cradle......-criteria decision analysis method was used to develop a decision support system and applied to the study. In this thesis a standard LCA of the drinking water supply technology of today (base case) and 4 alternative cases for water supply technologies is conducted. The standard LCA points at the case rain...

Evaluation of airborne thermal, magnetic, and electromagnetic characterization technologies

Energy Technology Data Exchange (ETDEWEB)

Josten, N.E.

1992-03-01

The identification of Buried Structures (IBS) or Aerial Surveillance Project was initiated by the US Department of Energy (DOE) Office of Technology Development to demonstrate airborne methods for locating and identifying buried waste and ordnance at the Idaho National Engineering Laboratory (INEL). Two technologies were demonstrated: (a) a thermal infrared imaging system built by Martin Marietta Missile Systems and (b) a magnetic and electromagnetic (EM) geophysical surveying system operated by EBASCO Environmental. The thermal system detects small differences in ground temperature caused by uneven heating and cooling of the ground by the sun. Waste materials on the ground can be detected when the temperature of the waste is different than the background temperature. The geophysical system uses conventional magnetic and EM sensors. These sensors detect disturbances caused by magnetic or conductive waste and naturally occurring magnetic or conductive features of subsurface soils and rock. Both systems are deployed by helicopter. Data were collected at four INEL sites. Tests at the Naval Ordnance Disposal Area (NODA) were made to evaluate capabilities for detecting ordnance on the ground surface. Tests at the Cold Simulated Waste Demonstration Pit were made to evaluate capabilities for detecting buried waste at a controlled site, where the location and depth of buried materials are known. Tests at the Subsurface Disposal Area and Stationary Low-Power Reactor-1 burial area were made to evaluate capabilities for characterizing hazardous waste at sites that are typical of DOE buried waste sites nationwide.

Evaluation of airborne thermal, magnetic, and electromagnetic characterization technologies

International Nuclear Information System (INIS)

Josten, N.E.

1992-03-01

The identification of Buried Structures (IBS) or Aerial Surveillance Project was initiated by the US Department of Energy (DOE) Office of Technology Development to demonstrate airborne methods for locating and identifying buried waste and ordnance at the Idaho National Engineering Laboratory (INEL). Two technologies were demonstrated: (a) a thermal infrared imaging system built by Martin Marietta Missile Systems and (b) a magnetic and electromagnetic (EM) geophysical surveying system operated by EBASCO Environmental. The thermal system detects small differences in ground temperature caused by uneven heating and cooling of the ground by the sun. Waste materials on the ground can be detected when the temperature of the waste is different than the background temperature. The geophysical system uses conventional magnetic and EM sensors. These sensors detect disturbances caused by magnetic or conductive waste and naturally occurring magnetic or conductive features of subsurface soils and rock. Both systems are deployed by helicopter. Data were collected at four INEL sites. Tests at the Naval Ordnance Disposal Area (NODA) were made to evaluate capabilities for detecting ordnance on the ground surface. Tests at the Cold Simulated Waste Demonstration Pit were made to evaluate capabilities for detecting buried waste at a controlled site, where the location and depth of buried materials are known. Tests at the Subsurface Disposal Area and Stationary Low-Power Reactor-1 burial area were made to evaluate capabilities for characterizing hazardous waste at sites that are typical of DOE buried waste sites nationwide

Department of Reactor Technology annual progress report 1 January -31 December 1977

International Nuclear Information System (INIS)

1978-04-01

The work of the Department of Reactor Technology within the following fields is described: reactor engineering, reactor operation, structural reliability, system reliability, reactor physics, fuel management, reactor accident analysis for LOCA and ECC, containment analysis, experimental heat transfer, reactor core dynamics and power plant simulators, experimental activation measurements and neutron radiography at the DR 1 reactor, underground storage of gas, solar heating and underground heat storage, wind power. (author)

Proposal for an ad hoc computer network in the military electronic systems department at the military academy applying bluetooth technology

Directory of Open Access Journals (Sweden)

Miroslav R. Terzić

2011-01-01

Full Text Available The historical development of the Bluetooth module is given in the introduction of this paper. The importance of the Bluetooth standard for wireless connection on small distances is shown as well. The organization of the Department of Military Electronic Systems is presented with its area of duties, subordinate sections and deployment. The concept of a local area network for this Department, using Bluetooth technology, includes network topology and working regimes based on the main characteristics and technical specifications for the connection with Bluetooth technology. The Department's disperse computer network is proposed as a scatter net where one piconetwork includes the Head of Department and the Heads of Sections while other piconetworks are formed from the Heads of Sections and their subordinates. The security aspect of the presented network deals with basic computer network attack categories, protection methods and aspects. The paper concludes with some recommendations for the local area network using Bluetooth technology with respect to its economical and security aspects as well as to the managing principles of the Department.

ICPP radioactive liquid and calcine waste technologies evaluation final report and recommendation

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

Using a formalized Systems Engineering approach, the Latched Idaho Technologies Company developed and evaluated numerous alternatives for treating, immobilizing, and disposing of radioactive liquid and calcine wastes at the Idaho Chemical Processing Plant. Based on technical analysis data as of March, 1995, it is recommended that the Department of Energy consider a phased processing approach -- utilizing Radionuclide Partitioning for radioactive liquid and calcine waste treatment, FUETAP Grout for low-activity waste immobilization, and Glass (Vitrification) for high-activity waste immobilization -- as the preferred treatment and immobilization alternative.

U.S. Department of Energy Hydrogen and Fuel Cells Program 2012 Annual Merit Review and Peer Evaluation Report: May 14-18, 2012, Arlington, VA

Energy Technology Data Exchange (ETDEWEB)

2012-09-01

This document summarizes the comments provided by peer reviewers on hydrogen and fuel cell projects presented at the fiscal year (FY) 2012 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting (AMR), held May 14-18, 2012, in Arlington, VA.

Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model.

Science.gov (United States)

Ehteshami, Asghar

2017-03-01

Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don't accept and don't use it. This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be important in the barcode

The Profile of Neurology Patients Evaluated in the Emergency Department

Directory of Open Access Journals (Sweden)

Ufuk Emre

2009-09-01

Full Text Available OBJECTIVE: Early, rapid, and multidisciplinary approaches are very important in the diagnosis of neurological disorders in emergency departments. The present study aimed to investigate the features of patients that presented for neurology consultation in the emergency department. METHODS: The present study included 780 patients. Patient demographic features, reasons for emergent treatment and neurological consultation, neurological diagnosis by the neurologist, and laboratory (total blood count, serum glucose level, urea, creatine, erythrocyte sedimentation rate, and D-dimer levels and imaging findings were retrospectively evaluated based on patient charts. RESULTS: Impaired consciousness was the most frequent reason for neurological consultation (19.7%. Among these patients, ischemic stroke was diagnosed in 27.9%, hypoxic encephalopathy in 18.2%, cerebral hemorrhage in 9.1%, and 11% had no neurological diagnosis. Other common reasons for neurological consultation were vertigo, headache, seizure, and stroke. Clinical findings were related to other systemic causes in 43.7% of the study group. Focal neurological findings were present, especially in patients that presented with ischemic and hemorrhagic stroke, epilepsy, and hypoxic encephalopathy. CONCLUSION: In emergency departments, metabolic causes should be ruled out in patients with impaired consciousness and the absence of focal neurological signs. Intracranial structural disorders must be evaluated when focal neurological signs are present. Cautiously prepared algorithms and neurological examination training will help improve the accuracy of emergency department diagnoses

Robotics Scoping Study to Evaluate Advances in Robotics Technologies that Support Enhanced Efficiencies for Yucca Mountain Repository Operations

International Nuclear Information System (INIS)

Burgess, T.; Noakes, M.; Spampinato, P.

2005-01-01

This paper presents an evaluation of robotics and remote handling technologies that have the potential to increase the efficiency of handling waste packages at the proposed Yucca Mountain High-Level Nuclear Waste Repository. It is expected that increased efficiency will reduce the cost of operations. The goal of this work was to identify technologies for consideration as potential projects that the U.S. Department of Energy Office of Civilian Radioactive Waste Management, Office of Science and Technology International Programs, could support in the near future, and to assess their ''payback'' value. The evaluation took into account the robotics and remote handling capabilities planned for incorporation into the current baseline design for the repository, for both surface and subsurface operations. The evaluation, completed at the end of fiscal year 2004, identified where significant advantages in operating efficiencies could accrue by implementing any given robotics technology or approach, and included a road map for a multiyear R and D program for improvements to remote handling technology that support operating enhancements

Robotics Scoping Study to Evaluate Advances in Robotics Technologies that Support Enhanced Efficiencies for Yucca Mountain Repository Operations

Energy Technology Data Exchange (ETDEWEB)

T. Burgess; M. Noakes; P. Spampinato

2005-03-17

This paper presents an evaluation of robotics and remote handling technologies that have the potential to increase the efficiency of handling waste packages at the proposed Yucca Mountain High-Level Nuclear Waste Repository. It is expected that increased efficiency will reduce the cost of operations. The goal of this work was to identify technologies for consideration as potential projects that the U.S. Department of Energy Office of Civilian Radioactive Waste Management, Office of Science and Technology International Programs, could support in the near future, and to assess their ''payback'' value. The evaluation took into account the robotics and remote handling capabilities planned for incorporation into the current baseline design for the repository, for both surface and subsurface operations. The evaluation, completed at the end of fiscal year 2004, identified where significant advantages in operating efficiencies could accrue by implementing any given robotics technology or approach, and included a road map for a multiyear R&D program for improvements to remote handling technology that support operating enhancements.

Development of technology for next generation reactor - Research of evaluation technology for nuclear power plant -

Energy Technology Data Exchange (ETDEWEB)

Park, Jong Kyun; Chang, Moon Heuy; Hwang, Yung Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)] [and others

1993-09-01

For development of next generation reactor, a project for evaluation technology for nuclear power plant is performed. Evaluation technology is essential to next generation reactor for reactor safety and system analysis. For design concept, detailed evaluation technologies are studied as follows: evaluation of safety margin, evaluation of safety facilities, evaluation of measurement and control technology; man-machine interface. Especially for thermal efficiency, thermal properties and chemical composition of inconel 690 tube, instead of inconel 600 tube, are measured for steam generator. (Author).

Melter Technologies Assessment

Energy Technology Data Exchange (ETDEWEB)

Perez, J.M. Jr. [Pacific Northwest National Lab., Richland, WA (United States); Schumacher, R.F. [Savannah River Technology Center, Aiken, SC (United States); Forsberg, C.W. [Oak Ridge National Lab., TN (United States)

1996-05-01

The problem of controlling and disposing of surplus fissile material, in particular plutonium, is being addressed by the US Department of Energy (DOE). Immobilization of plutonium by vitrification has been identified as a promising solution. The Melter Evaluation Activity of DOE`s Plutonium Immobilization Task is responsible for evaluating and selecting the preferred melter technologies for vitrification for each of three immobilization options: Greenfield Facility, Adjunct Melter Facility, and Can-In-Canister. A significant number of melter technologies are available for evaluation as a result of vitrification research and development throughout the international communities for over 20 years. This paper describes an evaluation process which will establish the specific requirements of performance against which candidate melter technologies can be carefully evaluated. Melter technologies that have been identified are also described.

Metallurgy Department

DEFF Research Database (Denmark)

Risø National Laboratory, Roskilde

The activities of the Metallurgy Department at Risø during 1981 are described. The work is presented in three chapters: General Materials Research, Technology and Materials Development, Fuel Elements. Furthermore, a survey is given of the department's participation in international collaboration...

Thermal treatment technology study and data base for Department of Energy mixed waste

International Nuclear Information System (INIS)

Gillins, R.L.; Steverson, E.M.; Balo, K.A.

1991-01-01

The Department of Energy (DOE) has a wide variety of waste streams that must be treated to meet various regulations before final disposal. One category of technologies for treating many of these waste streams is thermal treatment. A study of known thermal treatment technologies was conducted to aid DOE in the development of strategies to meet its waste management needs. The study was specifically addressed to mixed waste, but it is also applicable to hazardous and radioactive wastes. The data collected in the study, along with other waste management data, are being included in a comprehensive data base that DOE is developing. 3 refs., 1 fig

Technology Validation: Fuel Cell Bus Evaluations

Energy Technology Data Exchange (ETDEWEB)

Eudy, Leslie [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-01-02

This presentation describing the FY 2016 accomplishments for the National Renewable Energy Laboratory's Fuel Cell Bus Evaluations project was presented at the U.S. Department of Energy Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting, June 7, 2016.

Weapons of Mass Destruction Technology Evaluation and Training Range

Energy Technology Data Exchange (ETDEWEB)

Kevin Larry Young

2009-05-01

The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

Department of Accelerator Physics and Technology: Overview

International Nuclear Information System (INIS)

Pachan, M.

1999-01-01

Full text: As presented at the overview seminar held on December 98, the activities of the Department were shared among several directions of accelerator applications, as well as research and development works on new accelerator techniques and technologies. In the group of proton and ion accelerators, two main tasks were advanced. The first was a further step in the optimization of operational parameters of multicusp ion-source, prepared for axial injection system in C-30 cyclotron. Another one is the participation in important modifications of r.f. acceleration system in heavy-ion accelerator C-200 of Warsaw University. In the broad field of electron accelerators our main attention was directed at medical applications. Most important of them was the designing and construction of a full scale technological model of a high-gradient accelerating structure for low-energy radiotherapy unit CO-LINE 1000. Microwave measurements, and tuning were accomplished, and the technical documentation for construction of radiation unit completed. This work was supported by the State Committee for Scientific Research. Preparatory work was continued to undertake in the year 1999 the design of two new medical accelerators. First is a new generation radiotherapy unit, with 15 MeV electron beam and two selected energies of X-ray photons. This accelerator should in future replace the existing Neptun 10 MeV units. The work will be executed in the frame of the Project-Ordered commissioned by the State Committee for Scientific Research. The next type of accelerators in preparation is the mobile, self-shielded electron-beam unit for inter operative irradiation. The specification of parameters was completed and study of possible solutions advanced. The programme of medical accelerator development is critically dependent on the existence of a metrological and experimental basis. Therefore the building of a former proton linear accelerator was adopted to the new function as electron accelerators

U.S. Department of Energy Hydrogen and Fuel Cells Program, 2013 Annual Merit Review and Peer Evaluation Report (Book)

Energy Technology Data Exchange (ETDEWEB)

None, None

2013-10-01

The fiscal year (FY) 2013 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting (AMR), in conjunction with DOE's Vehicle Technologies Office AMR, was held from May 13-16, 2013, at the Crystal City Marriott and Crystal Gateway Marriott in Arlington, Virginia. This report is a summary of comments by AMR peer reviewers about the hydrogen and fuel cell projects funded by DOE's Office of Energy Efficiency and Renewable Energy (EERE).

Evaluation of Trenchless Installation Technology for Radioactive Wastewater Piping Applications

International Nuclear Information System (INIS)

Robinson, Sharon M.; Jubin, Robert Thomas; Patton, Bradley D.; Sullivan, Nicholas M.; Bugbee, Kathy P.

2009-01-01

The U.S. Department of Energy (DOE) Office of Environmental Management (EM) cleanup mission at Oak Ridge National Laboratory (ORNL) includes dispositioning facilities, contaminated legacy materials/waste, and contamination sources and remediation of soil under facilities, groundwater, and surface water to support final Records of Decision (RODs). The Integrated Facilities Disposition Project (IFDP) is a roughly $15B project for completion of the EM mission at Oak Ridge, with a project duration of up to 35 years. The IFDP Mission Need Statement - Critical Decision-0 (CD-0) - was approved by DOE in July 2007, and the IFDP Alternative Selection and Cost Range - Critical Decision-1 (CD-1) - was approved in November 2008. The IFDP scope includes reconfiguration of waste collection and treatment systems as needed to complete the IFDP remediation and decontamination and decommissioning (D and D) missions in a safe and cost-effective manner while maintaining compliance with all governing regulations and bodies and preserving the support of continuing operations at ORNL. A step in the CD-1 approval process included an external technical review (ETR) of technical approaches proposed in the CD-1 document related to the facility reconfiguration for the ORNL radioactive waste and liquid low-level waste management systems. The ETR team recommended that the IFDP team consider the use of trenchless technologies for installing pipelines underground in and around contaminated sites as part of the alternatives evaluations required in support of the CD-2 process. The team specifically recommended evaluating trenchless technologies for installing new pipes in existing underground pipelines as an alternative to conventional open trench installation methods. Potential benefits could include reduction in project costs, less costly underground piping, fewer disruptions of ongoing and surface activities, and lower risk for workers. While trenchless technologies have been used extensively in

Department of Reactor Technology: annual progress report 1 January - 31 December 1976

International Nuclear Information System (INIS)

1977-06-01

The work of the Department of Reactor Technology within the following fields is described: reactor engineering, structural reliability, system reliability, radiation fiels in nuclear power plants, reactor physics, fuel management, fission product decay analysis, steady-state thermo-hydraulics, reactor accident analysis for LOCA and ECC, containment analysis, experimental heat transfer, reactor core dynamics and power plant simulators, control rod ejection accident analysis, economic studies for power plants, experimental activation measurements and neutron radiography at the DR 1 reactor. (author)

The development of coal-based technologies for Department of Defense facilities. Semiannual technical progress report, September 28, 1993--March 27, 1994

Energy Technology Data Exchange (ETDEWEB)

Miller, B.G.; Morrison, J.L.; Sharifi, R.; Shepard, J.F.; Scaroni, A.W.; Hogg, R.; Chander, S.; Cho, H.; Ityokumbul, M.T.; Klima, M.S. [and others

1994-11-30

The U.S. Department of Defense (DOD), through an Interagency Agreement with the U.S. Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE and the first two phases of the program are underway. To achieve the objectives of the program, a team of researchers was assembled. Phase I activities are focused on developing clean, coal-based combustion technologies for the utilization of both micronized coal-water slurry fuels (MCWSFS) and dry, micronized coal (DMC) in fuel oil-designed industrial boilers. Phase II research and development activities will continue to focus on industrial boiler retrofit technologies by addressing emissions control and precombustion (i.e., slagging combustion and/or gasification) strategies for the utilization of high ash, high sulfur coals. Phase III activities will examine coal-based fuel combustion systems that cofire wastes. Each phase includes an engineering cost analysis and technology assessment. The activities and status of Phases I and II are described below. The objective in Phase I is to deliver fully engineered retrofit options for a fuel oil-designed watertube boiler located on a DOD installation to fire either MCWSF or DMC. This will be achieved through a program consisting of the following five tasks: (1) Coal Beneficiation and Preparation; (2) Combustion Performance Evaluation; (3) Engineering Design; (4) Engineering and Economic Analysis; and (5) Final Report/Submission of Design Package.

Technology Evaluation Report: Non-destructive ...

Science.gov (United States)

Technology Evaluation Report HSRP is working to develop tools and information that will help detect the intentional introduction of chemical or biological contaminants in buildings or water systems, the containment of these contaminants, the decontamination of buildings and/or water systems, and the management of wastes generated from decontamination and cleanup operations. Evaluation of the performance of CBI Polymers’ DeconGelTM 1108, Environmental Alternatives, Inc.’s (EAI’s) Rad-Release II (RRII), Environmental Alternatives, Inc.’s SuperGel, and Intek Technologies’ LH-21. The objective of evaluating these technologies was to test their ability to remove radioactive cesium (Cs)-137 from the mixed building material coupons of brick with mortar, tile with grout, granite with mortar, all mortar and all grout coupons.

The US Department of Energy Personnel Dosimetry Evaluation and Upgrade Program

International Nuclear Information System (INIS)

Faust, L.G.; Stroud, C.M.; Swinth, K.L.; Vallario, E.J.

1987-11-01

The US Department of Energy (DOE) Personnel Dosimetry Evaluation and Upgrade Program is designed to identify and evaluate dosimetry deficiencies and to conduct innovative research and development programs that will improve overall capabilities, thus ensuring that DOE can comply with applicable standards and regulations for dose measurement. To achieve these goals, two programs were initiated to evaluate and upgrade beta measurement and neutron dosimetry. 3 refs

[Evaluation of hospital admissions: admission guidelines implementation in a pediatric emergency department].

Science.gov (United States)

Katz, Manuel; Warshawsky, Sheila S; Rosen, Shirley; Barak, Nurit; Press, Joseph

2004-10-01

To develop and implement locally tailored pediatric admission guidelines for use in a pediatric emergency department and evaluate the appropriateness of admissions based on these guidelines. Our Study was based on the development of admission guidelines by senior physicians, using the Delphi Consensus Process, for use in the Pediatric Emergency Department (PED) at Soroka University Medical Center (Soroka). We evaluated the appropriateness of admissions to the pediatric departments of Soroka on 33 randomly selected days in 1999 and 2000 prior to guideline implementation and 30 randomly selected days in 2001, after guideline implementation. A total of 1037 files were evaluated. A rate of 12.4% inappropriate admissions to the pediatric departments was found based on locally tailored admission guidelines. There was no change in the rate of inappropriate admissions after implementation of admission guidelines in PED. Inappropriate admissions were associated with age above 3 years, hospital stay of two days or less and the season. The main reasons for evaluating an admission as inappropriate were that the admission did not comply with the guidelines and that the case could be managed in an ambulatory setting. There were distinctive differences in the characteristics of the Bedouin and Jewish populations admitted to the pediatric departments, although no difference was found in the rate of inappropriate admissions between these populations. Patient management in Soroka PED is tailored to the conditions of this medical center and to the characteristics of the population it serves. The admission guidelines developed reflect these special conditions. Lack of change in the rate of inappropriate admissions following implementation of the guidelines indicates that the guidelines reflect the physicians' approach to patient management that existed in Soroka PED prior to guideline implementation. Hospital admission guidelines have a role in the health management system; however

Evaluating the Implementation of a Twitter-Based Foodborne Illness Reporting Tool in the City of St. Louis Department of Health

Directory of Open Access Journals (Sweden)

Jenine K. Harris

2018-04-01

Full Text Available Foodborne illness is a serious and preventable public health problem affecting 1 in 6 Americans with cost estimates over $50 billion annually. Local health departments license and inspect restaurants to ensure food safety and respond to reports of suspected foodborne illness. The City of St. Louis Department of Health adopted the HealthMap Foodborne Dashboard (Dashboard, a tool that monitors Twitter for tweets about food poisoning in a geographic area and allows the health department to respond. We evaluated the implementation by interviewing employees of the City of St. Louis Department of Health involved in food safety. We interviewed epidemiologists, environmental health specialists, health services specialists, food inspectors, and public information officers. Participants viewed engaging innovation participants and executing the innovation as challenges while they felt the Dashboard had relative advantage over existing reporting methods and was not complex once in place. This study is the first to examine practitioner perceptions of the implementation of a new technology in a local health department. Similar implementation projects should focus more on process by developing clear and comprehensive plans to educate and involve stakeholders prior to implementation.

Examination of the factors and issues for an environmental technology utilization partnership between the private sector and the Department of Energy. Final report

Energy Technology Data Exchange (ETDEWEB)

Brouse, P.

1997-05-01

The Department of Energy (DOE) held a meeting on November 12, 1992 to evaluate the DOE relations with industry and university partners concerning environmental technology utilization. The goal of this meeting was to receive feedback from DOE industry and university partners for the identification of opportunities to improve the DOE cooperative work processes with the private sector. The meeting was designed to collect information and to turn that information into action to improve private sector partnerships with DOE.

INTEGRATION OF INFORMATIONAL COMPUTER TECHNOLOGIES SMK: AUTOMATION OF THE MAIN FUNCTIONS OF THE TECHNICAL CONTROL DEPARTMENT

Directory of Open Access Journals (Sweden)

S. A. Pavlenko

2010-01-01

Full Text Available It is shown that automation of some functions of control department allows to record defects, reclamations and failures of technology, to make the necessary reporting forms and quality certificates for production.

Improving early cycle economic evaluation of diagnostic technologies

NARCIS (Netherlands)

Steuten, Lotte Maria Gertruda; Ramsey, Scott D.

2014-01-01

The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to

U.S. Department of Energy Report on the First Quadrennial Technology Review (QTR)

Energy Technology Data Exchange (ETDEWEB)

Quadrennial Technology Review Team

2011-09-01

Access to clean, affordable, secure, and reliable energy has been a cornerstone of American’s economic growth. Yet, today the Nation’s systems that produce, store, transmit, and use energy are falling short of U.S needs. The Department of Energy’s (DOE) first Quadrennial Technology Review (QTR), launched at the recommendation of the President’s Council of Advisors on Science and Technology (PCAST), addresses these facts. The report details today’s energy landscape and the associated energy security, economic and environmental challenges; provides a framework for presenting six strategies to address those challenges encompassing vehicle efficiency, deployment of alternative hydrocarbon fuels, increased building and industrial efficiency, modernization of the grid, and deployment of clean electricity; addresses priorities among activities in DOE’s energy-technology programs; and explains the roles that DOE, the broader government, the private sector, the national laboratories, and academia play in energy transformation.

Portrait of rural emergency departments in Quebec and utilisation of the Quebec Emergency Department Management Guide: a study protocol.

Science.gov (United States)

Fleet, Richard; Archambault, Patrick; Légaré, France; Chauny, Jean-Marc; Lévesque, Jean-Frédéric; Ouimet, Mathieu; Dupuis, Gilles; Haggerty, Jeannie; Poitras, Julien; Tanguay, Alain; Simard-Racine, Geneviève; Gauthier, Josée

2013-01-01

Emergency departments are important safety nets for people who live in rural areas. Moreover, a serious problem in access to healthcare services has emerged in these regions. The challenges of providing access to quality rural emergency care include recruitment and retention issues, lack of advanced imagery technology, lack of specialist support and the heavy reliance on ambulance transport over great distances. The Quebec Ministry of Health and Social Services published a new version of the Emergency Department Management Guide, a document designed to improve the emergency department management and to humanise emergency department care and services. In particular, the Guide recommends solutions to problems that plague rural emergency departments. Unfortunately, no studies have evaluated the implementation of the proposed recommendations. To develop a comprehensive portrait of all rural emergency departments in Quebec, data will be gathered from databases at the Quebec Ministry of Health and Social Services, the Quebec Trauma Registry and from emergency departments and ambulance services managers. Statistics Canada data will be used to describe populations and rural regions. To evaluate the use of the 2006 Emergency Department Management Guide and the implementation of its various recommendations, an online survey and a phone interview will be administered to emergency department managers. Two online surveys will evaluate quality of work life among physicians and nurses working at rural emergency departments. Quality-of-care indicators will be collected from databases and patient medical files. Data will be analysed using statistical (descriptive and inferential) procedures. This protocol has been approved by the CSSS Alphonse-Desjardins research ethics committee (Project MP-HDL-1213-011). The results will be published in peer-reviewed scientific journals and presented at one or more scientific conferences.

Clean coal technologies---An international seminar: Seminar evaluation and identification of potential CCT markets

International Nuclear Information System (INIS)

Guziel, K.A.; Poch, L.A.; Gillette, J.L.; Buehring, W.A.

1991-07-01

The need for environmentally responsible electricity generation is a worldwide concern. Because coal is available throughout the world at a reasonable cost, current research is focusing on technologies that use coal with minimal environmental effects. The United States government is supporting research on clean coal technologies (CCTs) to be used for new capacity additions and for retrofits to existing capacity. To promote the worldwide adoption of US CCTs, the US Department of Energy, the US Agency for International Development, and the US Trade and Development Program sponsored a two-week seminar titled Clean Coal Technologies -- An International Seminar. Nineteen participants from seven countries were invited to this seminar, which was held at Argonne National Laboratory in June 1991. During the seminar, 11 US CCT vendors made presentations on their state-of-the-art and commercially available technologies. The presentations included technical, environmental, operational, and economic characteristics of CCTs. Information on financing and evaluating CCTs also was presented, and participants visited two CCT operating sites. The closing evaluation indicated that the seminar was a worthwhile experience for all participants and that it should be repeated. The participants said CCT could play a role in their existing and future electric capacity, but they agreed that more CCT demonstration projects were needed to confirm the reliability and performance of the technologies

Evaluating Work-Life Balance in the Department of Defense

Science.gov (United States)

2011-04-18

Evaluating Work - Life Balance in the Department of Defense Erin A. Moeser Defense Equal Opportunity Management Institute (DEOMI) Kizzy M. Parks...for service members’ family lives may increase satisfaction with work - life balance . Examples of family-friendly organizational policies include...1,500 active duty military personnel were surveyed on the value of work / life balance initiates. More specifically, this study assessed respondents

Development of treatment technologies for the processing of US Department of Energy mixed waste

International Nuclear Information System (INIS)

Backus, P.M.; Berry, J.B.; Coyle, G.J.; Lurk, P.W.; Wolf, S.M.

1993-01-01

Waste contaminated with chemically hazardous and radioactive species is defined as mixed waste. Significant technology development has been conducted for separate treatment of hazardous and radioactive waste, but technology development addressing mixed-waste treatment has been limited. Management of mixed waste requires treatment which must meet the standards established by the US Environmental Protection Agency for the specific hazardous constituents while also providing adequate control of the radionuclides. Technology has not been developed, demonstrated, or tested to produce a low-risk final waste form specifically for mixed waste. Throughout the US Department of Energy (DOE) complex, mixed waste is a problem because definitive treatment standards have not been established and few disposal facilities are available. Treatment capability and capacity are also limited. Site-specific solutions to the management of mixed waste have been initiated; however, site-specific programs result in duplication of technology development between various sites. Significant progress is being made in developing technology for mixed waste under the Mixed Waste Integrated Program. The status of the technical initiatives in chemical/physical treatment, destruction/stabilization technology, off-gas treatment, and final waste form production/assessment is described in this paper

Department of Nuclear Equipment '' High Technology Center - HITEC '' - Overview

International Nuclear Information System (INIS)

Krawczyk, P.

2010-01-01

Full text: The Department of Nuclear Equipment, also known under the brand '' HITEC '' plays a unique role in the Institute. It combines research and development with manufacturing activities in the area of accelerator technology applications in medicine and industrial radiography. In 2010, the Department continued intense development efforts in the framework of Project No. POIG.01.01-14-012/08-00 (known under the short name of '' Accelerators and Detectors '') funded by EU Structural Funds. As described in detail elsewhere in this Report, these efforts resulted in substantial progress in the design and manufacture of the first model of a medical multi-energy accelerator for advanced radiotherapy. This model is an important testbed for a number of technologies and solutions that will be implemented in the final accelerator. Also, design and manufacture of the elements for an intra-surgery accelerator was carried out. It is worth noting that participation in the '' Accelerators and Detectors '' Project allowed HITEC to modernize significantly its manufacturing and testing capabilities. In 2010, the new equipment was successfully implemented for use in a manufacturing regime. The year 2010 also saw the completion of two R(and)D projects co-financed by the Polish Ministry of Science and Higher Education: · Multileaf Collimator as a Precision Device for Irradiation Field Delimiting in Medical Accelerators; · 4? Recessed Ionization Chamber with Internal Power Supply. In both cases, full scale prototypes of the respective devices were manufactured. In response to market interest HITEC started in 2010 a concept study of a compact low energy industrial radiography accelerator. Subsequently, HITEC received an order to develop and manufacture such a device and the development work was started. On completion the new device will extend the range of commercially available accelerators. In parallel to the above, HITEC continued to extend its engagement in scientific

Innovative technology transfer of nondestructive evaluation research

Science.gov (United States)

Brian Brashaw; Robert J. Ross; Xiping Wang

2008-01-01

Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

Students’ Perception on Teaching Practicum Evaluation using Video Technology

Science.gov (United States)

Chee Sern, Lai; ‘Ain Helan Nor, Nurul; Foong, Lee Ming; Hassan, Razali

2017-08-01

Video technology has been widely used in education especially in teaching and learning. However, the use of video technology for evaluation purpose especially in teaching practicum is extremely scarce and the benefits of video technology in teaching practicum evaluation have not yet been fully discovered. For that reason, this quantitative research aimed at identifying the perceptions of trainee teachers towards teaching practicum evaluation via video technology. A total of 260 students of Teacher Certification Programme (Program Pensiswazahan Guru - PPG) from the Faculty of Technical and Vocational Education (FPTV) of Universiti Tun Hussein Onn Malaysia (UTHM) had been randomly selected as respondents. A set of questionnaire was developed to assess the suitability, effectiveness and satisfaction of using video technology for teaching practicum. Conclusively, this research showed that the trainee teachers have positive perceptions in all three aspects related teaching practicum evaluation using video technology. Apart from that, no significant racial difference was found in the measured aspects. In addition, the trainee teachers also showed an understanding of the vast importance of teaching practicum evaluation via video. These research findings suggest that video technology can be a feasible and practical means of teaching practicum evaluation especially for distance learning program.

Assessment of the adequacy of US accelerator technology for Department of Energy missions

International Nuclear Information System (INIS)

Gerry, E.T.; Mani, S.A.

1983-09-01

Accelerator technology has made enormous impact across a wide field of research, industrial, and commercial endeavor and new developments are projected to broaden this technology transfer and open up new applications not previously possible or economically attractive. At the same time, however, the broad multi-agency base of support for the development of accelerator technology has largely evaporated leaving the program with the Department of Energy (DOE) Office of Energy Research (OER) as the only major National effort not directed at specific narrow applications. In order to continue to reap the benefits and spin-offs from this area of technology, an expanded long-term funding committment is vigorously endorsed since there appear to be major payoff potential in several areas of national need. Three specific recommendations are made that would accelerate the projected benefits from accelerator technology. An expanded effort should be undertaken to develop the key technologies of high brightness, high current, large area, long life, reliable ion, electron and RF sources along with associated studies directed toward accelerator design optimization. A centralized computational facility with a dedicated staff and library of programs for simulation of accelerator phenomenology should be created similar to that for the magnetic fusion program. Advanced accelerator R and D should be funded at a steady level to support a long range accelerator applications program

The Department of Energy's safeguards and security technology development program

International Nuclear Information System (INIS)

Smith, G.D.; Pocratsky, C.A.

1995-01-01

The US DOE has had a program that develops technologies to protect sensitive nuclear weapons facilities for more than thirty years. The mission of the program is overwhelmingly diverse, as it must be to protect an array of assets such as nuclear weapons, special nuclear material in various forms, components of nuclear weapons, and classified nuclear weapons design information. Considering that the nuclear weapons complex consists of dozens of facilities that are scattered all over the US, the technology development mission is very challenging. Complicating matters further is the ever uncertain future of the DOE. Some examples of dramatic Departmental mission changes that directly impact their security technology development program are given. A few development efforts are highlighted as examples of efforts currently being sponsored. They are: automated sensor testing devices to help reduce the requirement for personnel to enter vaults containing highly radioactive nuclear materials; a vehicle inspection portal to screen vehicles for hidden passengers, nuclear material, explosives, and other contraband; non-lead and short-range ammunition as an environmentally safe alternative to lead ammunition; a complex-wide visitor access control system to allow all DOE employees to travel to all sites with a commonly recognized credential; automated nuclear material monitoring technologies to provide assurance that material in storage has not been tampered with; laser radar as a potential solution to early warning deficiencies throughout the Department; performance testing standards for many security products to include an automated and consistent standard for assessing the quality of video; low temperature pyrotechnic smoke as a possible adversary delay mechanism; modular vaults to provide temporary protection for nuclear material during D and D activities, and a protection approach for restricted passage areas such as the volume above a tiled ceiling or within a crawl space

Department of Accelerator Physics and Technology - Overview

International Nuclear Information System (INIS)

Plawski, E.

2006-01-01

The activities of P-10 Department in year 2005 were devoted to: - development of radiographic 4 MeV electron accelerator, - development of accelerating and deflecting types travelling (TW) and standing wave (SW) RF structures for electrons and ions, - MC simulations applied to photon and ion radiotherapy The compact 6 MeV electron linac constructed in Department P-10 was put in the beginning of reported year into experimental operation. The request for permission to use ionisation source (6 MeV linac) was submitted to National Atomic Energy Agency. On the basis of all necessary documents the permission for routine using of our linac was granted. Actually the e/X conversion tungsten target has been moved from vacuum to air. To improve the safety of accelerator operation, the new collimator and some shielding walls were added. Two regimes of operation are actually possible: X ray output beam or electron beam depending on user demand. Some old non-reliable sub-units of accelerator were replaced, and energy and intensity optimisation for e-/X-ray conversion were made. The MC calculations of photon beams produced on e-/X converter were repeated taking into account the new collimator and additional shields. The triode gun, originally thought of as a part of 6/15 MeV medical accelerator is still on long term tests showing excellent performance; it was twice opened to air to confirm the possibility of repeated formation of gun dispenser cathode. New pulse modulator was routinely used in these tests. The sublimation set-up designed and made in our Department for the TiN coating of accelerator components underwent successfully the technological test including coating quality of several ceramic RF power vacuum windows. Within the German heavy ion therapy program the DKFZ Heidelberg is responsible for medical physics problems of treatment planning and modeling of ion beams for GSI Radiotherapy Facility. The MC simulations are used to calibrate the X-ray CT scanners to obtain

SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Fourth Results Report

Energy Technology Data Exchange (ETDEWEB)

Eudy, L.; Chandler, K.

2013-01-01

SunLine Transit Agency, which provides public transit services to the Coachella Valley area of California, has demonstrated hydrogen and fuel cell bus technologies for more than 10 years. In May 2010, SunLine began demonstrating the advanced technology (AT) fuel cell bus with a hybrid electric propulsion system, fuel cell power system, and lithium-based hybrid batteries. This report describes operations at SunLine for the AT fuel cell bus and five compressed natural gas buses. The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) is working with SunLine to evaluate the bus in real-world service to document the results and help determine the progress toward technology readiness. NREL has previously published three reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from February 2012 through November 2012.

Empirical Evaluation of a Technology-rich Learning Environment

OpenAIRE

McCreary, Faith

2001-01-01

In the fall of 1996, the Computer Science Department at Virginia Tech initiated a joint project with a local school district, to determine how ready access to networked computing in the fifth grade would affect students. Called the PCs for Families (PCF) project, its goal was to learn what could be achieved if technology access, support, and curriculum integration could be eliminated as obstacles or constraints in the classroom and at home. A technology-rich classroom was created, with the cl...

Federal technology transfer requirements :a focused study of principal agencies approaches with implications for the Department of Homeland Security.

Energy Technology Data Exchange (ETDEWEB)

Koker, Denise; Micheau, Jill M.

2006-07-01

This report provides relevant information and analysis to the Department of Homeland Security (DHS) that will assist DHS in determining how to meet the requirements of federal technology transfer legislation. These legal requirements are grouped into five categories: (1) establishing an Office of Research and Technology Applications, or providing the functions thereof; (2) information management; (3) enabling agreements with non-federal partners; (4) royalty sharing; and (5) invention ownership/obligations. These five categories provide the organizing framework for this study, which benchmarks other federal agencies/laboratories engaged in technology transfer/transition Four key agencies--the Department of Health & Human Services (HHS), the U.S. Department of Agriculture (USDA), the Department of Energy (DOE), and the Department of Defense (DoD)--and several of their laboratories have been surveyed. An analysis of DHS's mission needs for commercializing R&D compared to those agencies/laboratories is presented with implications and next steps for DHS's consideration. Federal technology transfer legislation, requirements, and practices have evolved over the decades as agencies and laboratories have grown more knowledgeable and sophisticated in their efforts to conduct technology transfer and as needs and opinions in the federal sector have changed with regards to what is appropriate. The need to address requirements in a fairly thorough manner has, therefore, resulted in a lengthy paper. There are two ways to find summary information. Each chapter concludes with a summary, and there is an overall ''Summary and Next Steps'' chapter on pages 57-60. For those readers who are unable to read the entire document, we recommend referring to these pages.

Transferability of economic evaluations of medical technologies: a new technology for orthopedic surgery.

Science.gov (United States)

Steuten, Lotte; Vallejo-Torres, Laura; Young, Terry; Buxton, Martin

2008-05-01

Transferring results of economic evaluations across countries or jurisdictions can potentially save scarce evaluation resources while helping to make market access and reimbursement decisions in a timely fashion. This article points out why transferring results of economic evaluations is particularly important in the field of medical technologies. It then provides an overview of factors that are previously identified in the literature as affecting transferability of economic evaluations, as well as methods for transferring results in a scientifically sound way. As the current literature almost exclusively relates to transferability of pharmacoeconomic evaluations, this article highlights those factors and methodologies that are of particular relevance to transferring medical technology assessments. Considering the state-of-the-art literature and a worked, real life, example of transferring an economic evaluation of a product used in orthopedic surgery, we provide recommendations for future work in this important area of medical technology assessment.

Evaluative conditioning of food technologies in China

DEFF Research Database (Denmark)

Loebnitz, Natascha; Grunert, Klaus G

2014-01-01

This study provides an initial examination of the evaluative conditioning (EC) of consumers’ attitudes toward food technologies in China, including how EC can affect consumer acceptance of new technology when participants possess different levels of social trust. In a study using the EC paradigm...... and a combination of between-subjects control groups and within-subjects control conditions, participants considered three food technologies (conventional, enzyme, and genetic), paired with affectively positive, neutral, and negative images. Subsequent evaluative measurements revealed that EC can explain attitude...... formation toward food technologies in China when consumers see affective images, but the strength of the effects varies at different levels of social trust. Participants with a high level of trust in the institutions that promote and regulate the technologies can be conditioned both positively...

Improving early cycle economic evaluation of diagnostic technologies.

Science.gov (United States)

Steuten, Lotte M G; Ramsey, Scott D

2014-08-01

The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to increase the return on investment as well as patient and societal impact. This paper describes examples of 'early cycle economic evaluations' as applied to diagnostic technologies and highlights challenges in its real-time application. It shows that especially in the field of diagnostics, with rapid technological developments and a changing regulatory climate, early cycle economic evaluation can have a guiding role to improve the efficiency of the diagnostics innovation process. In the next five years the attention will move beyond the methodological and analytic challenges of early cycle economic evaluation towards the challenge of effectively applying it to improve diagnostic research and development and patient value. Future work in this area should therefore be 'strong on principles and soft on metrics', that is, the metrics that resonate most clearly with the various decision makers in this field.

Evaluation of technology modifications required to apply clean coal technologies in Russian utilities. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

The report describes the following: overview of the Russian power industry; electric power equipment of Russia; power industry development forecast for Russia; clean coal technology demonstration program of the US Department of Energy; reduction of coal TPS (thermal power station) environmental impacts in Russia; and base options of advanced coal thermal power plants. Terms of the application of clean coal technology at Russian TPS are discussed in the Conclusions.

Department of Plasma Physics and Technology - Overview

International Nuclear Information System (INIS)

Rabinski, M.

2008-01-01

Full text: The activities of the Department in 2007 continued previous studies in the following fields of plasma physics, controlled nuclear fusion and plasma technology of surface engineering: · Studies of physical phenomena in pulsed discharges in the Plasma-Focus (PF) and RPI-IBIS facilities; · Development of selected methods for high-temperature plasma diagnostics; · Research on plasma technologies; · Selected problems of plasma theory and computational modelling. As for the experimental studies particular attention was paid to the analysis of the correlation of X-ray pulses with pulsed electron beams and other corpuscular emissions from different Plasma-Focus (PF) facilities. A collisional-radiative model, taking into account the Stark effect and strong electric fields in the so called '' hot- spot '' regions of a pinch, was applied in those analyses. The main aim of these studies was to identify the physical phenomena responsible for the emission during the PF-type discharges. The emitted protons were also measured with nuclear track detectors. The measurements made it possible to obtain images of the regions, where the D-D fusion reactions occurred, as well as to determine the angular distribution of the emitted protons. Pulsed plasma streams were also investigated by means of time-resolved optical spectroscopy and corpuscular diagnostics. In a frame of the EURATOM program, efforts were devoted to the development of diagnostic methods for tokamak-type facilities. Such studies include the design and construction of the 4-channel Cherenkov-type detection system for the TORE-SUPRA tokamak at CEA-Cadarache. In the meantime in order to collect some experience a new measuring head was especially prepared for experiments within small facilities. Other fusion- oriented efforts are connected with the application of the solid-state nuclear track detectors for investigation of protons from tokamak plasma and high-energy beams emitted from laser produced plasmas

Staff evaluation of US Department of Energy proposal for monitored retrievable storage

International Nuclear Information System (INIS)

1986-03-01

As directed by the Nuclear Waste Policy Act of 1982, the US Department of Energy has prepared a proposal for the US Congress for a facility that can be used for the monitored retrievable storage of spent fuel from commercial users. This report describes the evaluation performed by the staff of the US Nuclear Regulatory Commission of the design concepts for the monitored retrievable storage facility proposed by the Department of Energy. On February 5, 1986 the NRC submitted its principal comments to the Department of Energy in the letter shown on the following pages. 30 refs., 10 figs., 2 tabs

Analysis and evaluation of the applicability of green energy technology

Science.gov (United States)

Xu, Z. J.; Song, Y. K.

2017-11-01

With the seriousness of environmental issues and the shortage of resources, the applicability of green energy technology has been paid more and more attention by scholars in different fields. However, the current researches are often single in perspective and simple in method. According to the Theory of Applicable Technology, this paper analyzes and defines the green energy technology and its applicability from the all-around perspectives of symbiosis of economy, society, environment and science & technology etc., and correspondingly constructs the evaluation index system. The paper further applies the Fuzzy Comprehensive Evaluation to the evaluation of its applicability, discusses in depth the evaluation models and methods, and explains in detail with an example. The author holds that the applicability of green energy technology involves many aspects of economy, society, environment and science & technology and can be evaluated comprehensively by an index system composed of a number of independent indexes. The evaluation is multi-object, multi-factor, multi-level and fuzzy comprehensive, which is undoubtedly correct, effective and feasible by the Fuzzy Comprehensive Evaluation. It is of vital theoretical and practical significance to understand and evaluate comprehensively the applicability of green energy technology for the rational development and utilization of green energy technology and for the better promotion of sustainable development of human and nature.

30 CFR 7.31 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.31 Section 7.31 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... technology. MSHA may approve brattice cloth and ventilation tubing that incorporates technology for which the...

Performance Evaluation Methods for Assistive Robotic Technology

Science.gov (United States)

Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

Technology Games: Using Wittgenstein for Understanding and Evaluating Technology.

Science.gov (United States)

Coeckelbergh, Mark

2017-08-15

In the philosophy of technology after the empirical turn, little attention has been paid to language and its relation to technology. In this programmatic and explorative paper, it is proposed to use the later Wittgenstein, not only to pay more attention to language use in philosophy of technology, but also to rethink technology itself-at least technology in its aspect of tool, technology-in-use. This is done by outlining a working account of Wittgenstein's view of language (as articulated mainly in the Investigations) and by then applying that account to technology-turning around Wittgenstein's metaphor of the toolbox. Using Wittgenstein's concepts of language games and form of life and coining the term 'technology games', the paper proposes and argues for a use-oriented, holistic, transcendental, social, and historical approach to technology which is empirically but also normatively sensitive, and which takes into account implicit knowledge and know-how. It gives examples of interaction with social robots to support the relevance of this project for understanding and evaluating today's technologies, makes comparisons with authors in philosophy of technology such as Winner and Ihde, and sketches the contours of a phenomenology and hermeneutics of technology use that may help us to understand but also to gain a more critical relation to specific uses of concrete technologies in everyday contexts. Ultimately, given the holism argued for, it also promises a more critical relation to the games and forms of life technologies are embedded in-to the ways we do things.

Clean Technology Evaluation & Workforce Development Program

Energy Technology Data Exchange (ETDEWEB)

Patricia Glaza

2012-12-01

The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

Standoff Detection Technology Evaluation Facility

Data.gov (United States)

Federal Laboratory Consortium — The Standoff Detection Technology Evaluation facility is the only one of its kind in the country and allows researchers to release a known amount of material while...

30 CFR 7.411 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.411 Section 7.411 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Kits § 7.411 New technology. MSHA may approve cable products or splice kits that incorporate technology...

30 CFR 7.92 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 7.92 Section 7.92 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... Mines § 7.92 New technology. MSHA may approve a diesel engine that incorporates technology for which the...

30 CFR 14.23 - New technology.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false New technology. 14.23 Section 14.23 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF... § 14.23 New technology. MSHA may approve a conveyor belt that incorporates technology for which the...

Technology transfer in the energy domain in the Canton of Berne. Evaluation 1996. Final Report; Technologievermittlung im Energiebereich des Kantons Bern. Begleitende Evaluation 1996. Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Meier, R.; Schaerer, H.U.; Jakob, E.; Kriesi, R.; Spahr, I.; Schaefer, H.; Kuster, J.

1996-12-01

The Canton of Bern has promoted the transfer of technology since 1993. Together with the Department of Energy Economy, it began a pilot project in this field in 1995. An energy expert from the private sector was given the task of building up contacts between the energy research and industry. In this report, an independent expert evaluates this pilot project as positive and recommends its continuation. (author) figs., tabs., 10 refs.

Sodium technology handbook

International Nuclear Information System (INIS)

2005-09-01

This document was published as a textbook for the education and training of personnel working for operations and maintenances of sodium facilities including FBR plants and those engaged in R and D activities related to sodium technology. This handbook covers the following technical areas. Properties of sodium. Compatibilities of sodium with materials. Thermalhydraulics and structural integrity. Sodium systems and components. Sodium instrumentations. Sodium handling technology. Sodium related accident evaluation and countermeasures for FBRs. Operation, maintenance and repair technology of sodium facilities. Safety measures related to sodium. Laws, regulations and internal rules related to sodium. The plannings and discussions of the handbook were made in the Sodium Technology Education Committee organized in O-arai Engineering Center consisting of the representatives of the related departments including Tsuruga headquarters. Experts in various departments participated in writing individual technical subjects. (author)

Process evaluation of treatment times in a large radiotherapy department

International Nuclear Information System (INIS)

Beech, R.; Burgess, K.; Stratford, J.

2016-01-01

Purpose/objective: The Department of Health (DH) recognises access to appropriate and timely radiotherapy (RT) services as crucial in improving cancer patient outcomes, especially when facing a predicted increase in cancer diagnosis. There is a lack of ‘real-time’ data regarding daily demand of a linear accelerator, the impact of increasingly complex techniques on treatment times, and whether current scheduling reflects time needed for RT delivery, which would be valuable in highlighting current RT provision. Material/methods: A systematic quantitative process evaluation was undertaken in a large regional cancer centre, including a satellite centre, between January and April 2014. Data collected included treatment room-occupancy time, RT site, RT and verification technique and patient mobility status. Data was analysed descriptively; average room-occupancy times were calculated for RT techniques and compared to historical standardised treatment times within the department. Results: Room-occupancy was recorded for over 1300 fractions, over 50% of which overran their allotted treatment time. In a focused sample of 16 common techniques, 10 overran their allocated timeslots. Verification increased room-occupancy by six minutes (50%) over non-imaging. Treatments for patients requiring mobility assistance took four minutes (29%) longer. Conclusion: The majority of treatments overran their standardised timeslots. Although technique advancement has reduced RT delivery time, room-occupancy has not necessarily decreased. Verification increases room-occupancy and needs to be considered when moving towards adaptive techniques. Mobility affects room-occupancy and will become increasingly significant in an ageing population. This evaluation assesses validity of current treatment times in this department, and can be modified and repeated as necessary. - Highlights: • A process evaluation examined room-occupancy for various radiotherapy techniques. • Appointment lengths

Richland Operations Office technology summary

International Nuclear Information System (INIS)

1994-05-01

This document has been prepared by the Department of Energy's Environmental Management Office of Technology Development to highlight its research, development, demonstration, testing, and evaluation activities funded through the Richland Operations Office. Technologies and processes described have the potential to enhance cleanup and waste management efforts

Richland Operations Office technology summary

Energy Technology Data Exchange (ETDEWEB)

1994-05-01

This document has been prepared by the Department of Energy`s Environmental Management Office of Technology Development to highlight its research, development, demonstration, testing, and evaluation activities funded through the Richland Operations Office. Technologies and processes described have the potential to enhance cleanup and waste management efforts.

Assistive technology evaluations: Remote-microphone technology for children with Autism Spectrum Disorder.

Science.gov (United States)

Schafer, Erin C; Wright, Suzanne; Anderson, Christine; Jones, Jessalyn; Pitts, Katie; Bryant, Danielle; Watson, Melissa; Box, Jerrica; Neve, Melissa; Mathews, Lauren; Reed, Mary Pat

The goal of this study was to conduct assistive technology evaluations on 12 children diagnosed with Autism Spectrum Disorder (ASD) to evaluate the potential benefits of remote-microphone (RM) technology. A single group, within-subjects design was utilized to explore individual and group data from functional questionnaires and behavioral test measures administered, designed to assess school- and home-based listening abilities, once with and once without RM technology. Because some of the children were unable to complete the behavioral test measures, particular focus was given to the functional questionnaires completed by primary teachers, participants, and parents. Behavioral test measures with and without the RM technology included speech recognition in noise, auditory comprehension, and acceptable noise levels. The individual and group teacher (n=8-9), parent (n=8-9), and participant (n=9) questionnaire ratings revealed substantially less listening difficulty when RM technology was used compared to the no-device ratings. On the behavioral measures, individual data revealed varied findings, which will be discussed in detail in the results section. However, on average, the use of the RM technology resulted in improvements in speech recognition in noise (4.6dB improvement) in eight children, higher auditory working memory and comprehension scores (12-13 point improvement) in seven children, and acceptance of poorer signal-to-noise ratios (8.6dB improvement) in five children. The individual and group data from this study suggest that RM technology may improve auditory function in children with ASD in the classroom, at home, and in social situations. However, variability in the data and the inability of some children to complete the behavioral measures indicates that individualized assistive technology evaluations including functional questionnaires will be necessary to determine if the RM technology will be of benefit to a particular child who has ASD. Copyright �

25 CFR 1000.367 - Will the Department evaluate a Tribe's/Consortium's performance of non-trust related programs?

Science.gov (United States)

2010-04-01

... Evaluations § 1000.367 Will the Department evaluate a Tribe's/Consortium's performance of non-trust related... 25 Indians 2 2010-04-01 2010-04-01 false Will the Department evaluate a Tribe's/Consortium's performance of non-trust related programs? 1000.367 Section 1000.367 Indians OFFICE OF THE ASSISTANT SECRETARY...

Evaluation of soil characterization technologies using a stochastic, value-of-information approach

International Nuclear Information System (INIS)

Kaplan, P.G.

1993-01-01

The US Department of Energy has initiated an integrated demonstration program to develop and compare new technologies for the characterization of uranium-contaminated soils. As part of this effort, a performance-assessment task was funded in February, 1993 to evaluate the field tested technologies. Performance assessment can be cleaned as the analysis that evaluates a system's, or technology's, ability to meet the criteria specified for performance. Four new technologies were field tested at the Fernald Environmental Management Restoration Co. in Ohio. In the next section, the goals of this performance assessment task are discussed. The following section discusses issues that must be resolved if the goals are to be successfully met. The author concludes with a discussion of the potential benefits to performance assessment of the approach taken. This paper is intended to be the first of a series of documentation that describes the work. Also in this proceedings is a paper on the field demonstration at the Fernald site and a description of the technologies (Tidwell et al, 1993) and a paper on the application of advanced geostatistical techniques (Rautman, 1993). The overall approach is to simply demonstrate the applicability of concepts that are well described in the literature but are not routinely applied to problems in environmental remediation, restoration, and waste management. The basic geostatistical concepts are documented in Clark (1979) and in Issaks and Srivastava (1989). Advanced concepts and applications, along with software, are discussed in Deutsch and Journel (1992). Integration of geostatistical modeling with a decision-analytic framework is discussed in Freeze et al (1992). Information-theoretic and probabilistic concepts are borrowed from the work of Shannon (1948), Jaynes (1957), and Harr (1987). The author sees the task as one of introducing and applying robust methodologies with demonstrated applicability in other fields to the problem at hand

HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

The Systematic Approach to Training: Analysis and Evaluation in the Department of Safeguards

International Nuclear Information System (INIS)

Ticevic, S.; Weichselbraun, A.; Pickett, S.; Crete, J.-M.

2015-01-01

In applying a systematic approach to training (SAT), identifying the learning needs is the first step - a learning needs analysis allows the organization to identify the competencies required to perform a particular job. A systematic approach can provide a clear structure for training and education programme development as well as the necessary evaluation and feedback so that the organization can adjust the development accordingly and deliver the optimal learning experience. In this presentation we will describes two key elements of a SAT used in the Safeguards Training Section in the Department of Safeguards: Analysis and Evaluation. Analysis is the first part of a SAT needed to define competencies for Safeguards staff in order to improve training development within the Department. We describe the training needs analysis used to capture and articulate the various competencies required for safeguards implementation based upon an analysis of tasks and activities carried out by staff members in the Department. Firstly, we highlight the different qualitative methods used to gather information from staff and the process of evaluating and organizing this information into a structured framework. Secondly, we describe how this framework provides the necessary reference to specify learning objectives, evaluate training effectiveness, review and revise training offerings, and select appropriate training paths based on identified needs. In addition, as part of the SAT, evaluation is performed to identify the usefulness of course outcomes and improvements for future offerings based on lessons learned, to ensure that appropriate knowledge and skills are being taught and to demonstrate the value of training by meeting the organization's needs. We present how the Kirkpatrick four-level evaluation model has been implemented by Safeguards Training Section in order to evaluate course effectiveness after the training has been completed, and discuss how the current evaluation

New Technologies, New Approaches to Evaluating Academic Productivity

Science.gov (United States)

Rich, Peter J.; West, Richard E.

2012-01-01

Technology has enabled a proliferation of publication venues for disseminating academic work. The task of evaluating the relative quality of each of these venues is simultaneously exacerbated and resolved by the use of new technologies. In this article, the authors propose a three-pronged framework for evaluating the quality of scholarly work that…

Health technology assessment. Evaluation of biomedical innovative technologies.

Science.gov (United States)

Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

2010-01-01

This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

U.S. Department of Energy instrumentation and controls technology research for advanced small modular reactors

International Nuclear Information System (INIS)

Wood, Richard Thomas

2013-01-01

Instrumentation, controls, and human-machine interfaces (ICHMI) are essential enabling technologies that strongly influence nuclear power plant performance and operational costs. The U.S. Department of Energy (DOE) has recognized that ICHMI research, development, and demonstration (RD and D) is needed to resolve the technical challenges that may compromise the effective and efficient utilization of modern ICHMI technology and consequently inhibit realization of the benefits offered by expanded utilization of nuclear power. Consequently, key DOE programs have substantial ICHMI RD and D elements to their respective research portfolio. This article describes current ICHMI research to support the development of advanced small modular reactors. (author)

US Department of Energy natural phenomena design/evaluation guidelines/lessons learned

International Nuclear Information System (INIS)

Conrads, T.J.

1991-08-01

In the spring of 1988, DOE Order 6430.1A, General Design Criteria [1], was issued for use. This document references UCRL-15910, Design and Evaluation Guidelines for DOE Facilities Subjected to Natural Phenomena Hazards [2], which is to be used as the basis for the design and evaluation of new and existing facilities to natural phenomena loading. Rather than use the historical deterministic methods for computing structural and component loading from potential natural phenomena, UCRL-15910 incorporated the years of hazards studies conducted throughout the US Department of Energy complex into probabilistic-based methods. This paper describes the process used to incorporate US Department of Energy natural phenomena design guidelines into the Hanford Plant Standards -- Standard Design Criteria for Architectural and Civil Standards [3]. It also addresses the subsequent use of these criteria during structural assessments of facilities, systems, and components of various vintage in support of updating safety analysis reports. The paper includes comparison of results using these most recent probabilistic-based natural phenomena loading criteria to those obtained from previous assessments, and it addresses the lessons learned from the many structural evaluations of 1940--1960 vintage buildings

Development and demonstration of treatment technologies for the processing of US Department of Energy mixed waste

International Nuclear Information System (INIS)

Berry, J.B.; Bloom, G.A.; Kuchynka, D.J.

1994-01-01

Mixed waste is defined as waste contaminated with chemically hazardous (governed by the Resource Conservation and Recovery Act) and radioactive species [governed by US Department of Energy (DOE) orders]. The Mixed Waste Integrated Program (MWIP) is responding to the need for DOE mixed waste treatment technologies that meet these dual regulatory requirements. MWIP is developing emerging and innovative treatment technologies to determine process feasibility. Technology demonstrations will be used to determine whether processes are superior to existing technologies in reducing risk, minimizing life-cycle cost, and improving process performance. The Program also provides a forum for stakeholder and customer involvement in the technology development process. MWIP is composed of six technical areas that support a mixed-waste treatment system: (1) systems analysis, (2) materials handling, (3) chemical/physical separation, (4) waste destruction and stabilization, (5) off-gas treatment, and (6) final waste form stabilization. The status of the technical initiatives and the current research, development, and demonstration in each of these areas is described in this paper

U.S. Department of Energy Hydrogen and Fuel Cells Program 2016 Annual Merit Review and Peer Evaluation Report: June 6-10, 2016, Washington, DC

Energy Technology Data Exchange (ETDEWEB)

Popovich, Neil

2016-10-01

The fiscal year 2016 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting (AMR), in conjunction with DOE's Vehicle Technologies Office AMR, was held from June 6-10, 2015, in Washington, D.C.. This report is a summary of comments by AMR peer reviewers about the hydrogen and fuel cell projects funded by DOE's Office of Energy Efficiency and Renewable Energy.

U.S. Department of Energy Hydrogen and Fuel Cells Program 2015 Annual Merit Review and Peer Evaluation Report: June 8-12, 2015, Arlington, Virginia

Energy Technology Data Exchange (ETDEWEB)

Popovich, Neil

2015-10-01

The fiscal year 2015 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting (AMR), in conjunction with DOE's Vehicle Technologies Office AMR, was held from June 8-12, 2015, in Arlington, Virginia. This report is a summary of comments by AMR peer reviewers about the hydrogen and fuel cell projects funded by DOE's Office of Energy Efficiency and Renewable Energy.

The development of coal-based technologies for Department of Defense facilities: Phase 1 final report. Volume 1: Technical report

Energy Technology Data Exchange (ETDEWEB)

Miller, B.G.; Morrison, J.L.; Pisupati, S.V. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

1997-01-31

The first phase of a three-phase project investigating the development of coal-based technologies for Department of Defense facilities has been completed. The objectives of the project are to: decrease DOD`s dependence on foreign oil and increase its use of coal; promote public and private sector deployment of technologies for utilizing coal-based fuels in oil-designed combustion equipment; and provide a continuing environment for research and development of coal-based fuel technologies for small-scale applications at a time when market conditions in the US are not favorable for the introduction of coal-fired equipment in the commercial and industrial capacity ranges. The Phase 1 activities were focused on developing clean, coal-based combustion technologies for the utilization of both micronized coal-water mixtures (MCWMs) and dry, micronized coal (DMC) in fuel oil-designed industrial boilers. The specific objective in Phase 1 was to deliver fully engineered retrofit options for a fuel oil-designed watertube boiler located on a DOD installation to fire either MCWM or DMC. This was achieved through a project consisting of fundamental, pilot-sale, and demonstration-scale activities investigating coal beneficiation and preparation, and MCWM and DMC combustion performance. In addition, detailed engineering designs and an economic analysis were conducted for a boiler located at the Naval Surface Warfare Center, near Crane, Indiana. Results are reported on MCWM and DMC combustion performance evaluation; engineering design; and cost/economic analysis.

Evaluation of the radiological protection in several departments of nuclear medicine

International Nuclear Information System (INIS)

Lopez Bejerano, G.; Jova Sed, L.

2001-01-01

For the evaluation of radiation protection, in several departments of nuclear medicine a survey was elaborated and applied that includes mainly: aspects of the licence and compliance with the requirements settled down in this, the program of individual radiological surveillance and their evaluation, functions that it completes the service of radiation protection, training program and the personnel's training, equipment and means of radiation protection, radiological surveillance program of the work areas, characteristics of the installation, radioactive waste management, quality assurance program, relative aspects to radiation protection in the procedures of diagnoses, as well as to pregnant patients and those related with the investigation of accidental medical exposures. The work makes a systematization and discussion of the state of compliance of the radiation protection requirements reflected in the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS) and the main recommendations are exposed to achieve in these departments the optimization of the radiation protection. (author)

Department of Energy Small-Scale Hydropower Program: Feasibility assessment and technology development summary report

International Nuclear Information System (INIS)

Rinehart, B.N.

1991-06-01

This report summarizes two subprograms under the US Department of Energy's Small-Scale Hydroelectric Power Program. These subprograms were part of the financial assistance activities and included the Program Research and Development Announcement (PRDA) feasibility assessments and the technology development projects. The other major subprograms included engineering research and development, legal and institutional aspects, and technology transfer. These other subprograms are covered in their respective summary reports. The problems of energy availability and increasing costs of energy led to a national effort to develop economical and environmental attractive alternative energy resources. One such alternative involved the utilization of existing dams with hydraulic heads of <65 ft and the capacity to generate hydroelectric power of 15 MW or less. Thus, the PRDA program was initiated along with the Technology Development program. The purpose of the PRDA feasibility studies was to encourage development of renewable hydroelectric resources by providing engineering, economic, environmental, safety, and institutional information. Fifty-five feasibility studies were completed under the PRDA. This report briefly summarizes each of those projects. Many of the PRDA projects went on to become technology development projects. 56 refs., 1 fig., 2 tabs

Department of Energy Small-Scale Hydropower Program: Feasibility assessment and technology development summary report

Energy Technology Data Exchange (ETDEWEB)

Rinehart, B.N.

1991-06-01

This report summarizes two subprograms under the US Department of Energy's Small-Scale Hydroelectric Power Program. These subprograms were part of the financial assistance activities and included the Program Research and Development Announcement (PRDA) feasibility assessments and the technology development projects. The other major subprograms included engineering research and development, legal and institutional aspects, and technology transfer. These other subprograms are covered in their respective summary reports. The problems of energy availability and increasing costs of energy led to a national effort to develop economical and environmental attractive alternative energy resources. One such alternative involved the utilization of existing dams with hydraulic heads of <65 ft and the capacity to generate hydroelectric power of 15 MW or less. Thus, the PRDA program was initiated along with the Technology Development program. The purpose of the PRDA feasibility studies was to encourage development of renewable hydroelectric resources by providing engineering, economic, environmental, safety, and institutional information. Fifty-five feasibility studies were completed under the PRDA. This report briefly summarizes each of those projects. Many of the PRDA projects went on to become technology development projects. 56 refs., 1 fig., 2 tabs.

REMEDIATION TECHNOLOGY EVALUATION AT THE GILT EDGE MINE, SOUTH DAKOTA

Science.gov (United States)

This document reports the findings of the Mine Waste Technology Program's Activity III, Project 29,The Remediation Technology Evaluation Project at the Gilt Edge Mine, S.D. This project consisted of evaluating three emerging acidic waste rock stabilization technologies and compar...

Dr Phil Mjwara Director General, Department of Science and Technology (DST) Ministry of Science and Technology Republic of South Africa visit the Alice experiment introduce by Prof. Jurgen Schukraft, spokeperson for Alice.

CERN Multimedia

Maximilien Brice

2007-01-01

Dr Phil Mjwara Director General, Department of Science and Technology (DST) Ministry of Science and Technology Republic of South Africa visit the Alice experiment introduce by Prof. Jurgen Schukraft, spokeperson for Alice.

Technological options for management of hazardous wastes from US Department of Energy facilities

Energy Technology Data Exchange (ETDEWEB)

Chiu, S.; Newsom, D.; Barisas, S.; Humphrey, J.; Fradkin, L.; Surles, T.

1982-08-01

This report provides comprehensive information on the technological options for management of hazardous wastes generated at facilities owned or operated by the US Department of Energy (DOE). These facilities annually generate a large quantity of wastes that could be deemed hazardous under the Resource Conservation and Recovery Act (RCRA). Included in these wastes are liquids or solids containing polychlorinated biphenyls, pesticides, heavy metals, waste oils, spent solvents, acids, bases, carcinogens, and numerous other pollutants. Some of these wastes consist of nonnuclear hazardous chemicals; others are mixed wastes containing radioactive materials and hazardous chemicals. Nearly 20 unit processes and disposal methods are presented in this report. They were selected on the basis of their proven utility in waste management and potential applicability at DOE sites. These technological options fall into five categories: physical processes, chemical processes, waste exchange, fixation, and ultimate disposal. The options can be employed for either resource recovery, waste detoxification, volume reduction, or perpetual storage. Detailed descriptions of each technological option are presented, including information on process performance, cost, energy and environmental considerations, waste management of applications, and potential applications at DOE sites. 131 references, 25 figures, 23 tables.

Technological options for management of hazardous wastes from US Department of Energy facilities

International Nuclear Information System (INIS)

Chiu, S.; Newsom, D.; Barisas, S.; Humphrey, J.; Fradkin, L.; Surles, T.

1982-08-01

This report provides comprehensive information on the technological options for management of hazardous wastes generated at facilities owned or operated by the US Department of Energy (DOE). These facilities annually generate a large quantity of wastes that could be deemed hazardous under the Resource Conservation and Recovery Act (RCRA). Included in these wastes are liquids or solids containing polychlorinated biphenyls, pesticides, heavy metals, waste oils, spent solvents, acids, bases, carcinogens, and numerous other pollutants. Some of these wastes consist of nonnuclear hazardous chemicals; others are mixed wastes containing radioactive materials and hazardous chemicals. Nearly 20 unit processes and disposal methods are presented in this report. They were selected on the basis of their proven utility in waste management and potential applicability at DOE sites. These technological options fall into five categories: physical processes, chemical processes, waste exchange, fixation, and ultimate disposal. The options can be employed for either resource recovery, waste detoxification, volume reduction, or perpetual storage. Detailed descriptions of each technological option are presented, including information on process performance, cost, energy and environmental considerations, waste management of applications, and potential applications at DOE sites. 131 references, 25 figures, 23 tables

0-6803 : technology task force.

Science.gov (United States)

2013-12-01

Texas 83rd Legislature charged the Texas Department : of Transportation (TxDOT) with examining and : evaluating innovative transportation technologies to : decrease costs, reduce traffic congestion, enhance : safety, and increase economic producti...

SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: First Results Report

Energy Technology Data Exchange (ETDEWEB)

Eudy, L.; Chandler, K.

2011-03-01

This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This report provides the early data results and implementation experience of the AT fuel cell bus since it was placed in service.

DOE (Department of Energy) natural phenomena guidelines flood design and evaluation

International Nuclear Information System (INIS)

McCann, M.W.; Savy, J.B.

1989-01-01

Design and evaluation guidelines for DOE (Department of Energy) facilities subjected to earthquake, wind/tornado, and flood have been developed and presented in UCRL-15910 (Ref.1). This paper summarizes Chapter 6 of UCRL-15910 describing the philosophy and procedures for the design or evaluation of facilities for flood. The flood design and evaluation guidelines seek to ensure that DOE facilities satisfy the performance goals described in UCRL-15910. The guidelines are applicable to new and existing construction; however, in the evaluation of existing facilities, fewer design options may be available to satisfy the performance goals. Evaluation of the flood design for a facility consists of: (1) defining the design basis flood (DBFL), (2) evaluating site conditions (e.g., facility location, location of openings and doorways), and (3) assessing flood design strategies (e.g., build above DBFL levels, harden the site)

6th July 2010 - United Kingdom Science and Technology Facilities Council W. Whitehorn signing the guest book with Head of International relations F. Pauss, visiting the Computing Centre with Information Technology Department Head Deputy D. Foster, the LHC superconducting magnet test hall with Technology Department P. Strubin,the Centre Control Centre with Operation Group Leader M. Lamont and the CLIC/CTF3 facility with Project Leader J.-P. Delahaye.

CERN Multimedia

Teams : M. Brice, JC Gadmer

2010-01-01

6th July 2010 - United Kingdom Science and Technology Facilities Council W. Whitehorn signing the guest book with Head of International relations F. Pauss, visiting the Computing Centre with Information Technology Department Head Deputy D. Foster, the LHC superconducting magnet test hall with Technology Department P. Strubin,the Centre Control Centre with Operation Group Leader M. Lamont and the CLIC/CTF3 facility with Project Leader J.-P. Delahaye.

Implementing Relative Ranking Evaluation Framework at Department of Energy (DOE) installations

International Nuclear Information System (INIS)

Sharma, S.K.; Williamson, D.; Treichel, L.C.; James, L.M.

1996-01-01

The US Department of Energy (DOE) Office of Environmental Restoration (EM-40) has developed the Relative Ranking Evaluation Framework (RREF) to help categorize release sites, facilities and buildings requiring restoration or decommissioning. Based on this framework, a computer tool, the Relative Rank Evaluation Program (RREP) has been developed to evaluate release sites, facilities and buildings, and to manage information pertaining to relative ranking evaluations. The relative ranking information is being used by both Headquarters and field project managers, and other environmental personnel responsible for planning, executing and evaluation environmental restoration activities at DOE installations. External stakeholders, such as representatives of federal and state regulatory agencies, local governments and communities in the vicinity of current and formerly used DOE installations may use this data to review proposed and planned activities

[Decision modeling for economic evaluation of health technologies].

Science.gov (United States)

de Soárez, Patrícia Coelho; Soares, Marta Oliveira; Novaes, Hillegonda Maria Dutilh

2014-10-01

Most economic evaluations that participate in decision-making processes for incorporation and financing of technologies of health systems use decision models to assess the costs and benefits of the compared strategies. Despite the large number of economic evaluations conducted in Brazil, there is a pressing need to conduct an in-depth methodological study of the types of decision models and their applicability in our setting. The objective of this literature review is to contribute to the knowledge and use of decision models in the national context of economic evaluations of health technologies. This article presents general definitions about models and concerns with their use; it describes the main models: decision trees, Markov chains, micro-simulation, simulation of discrete and dynamic events; it discusses the elements involved in the choice of model; and exemplifies the models addressed in national economic evaluation studies of diagnostic and therapeutic preventive technologies and health programs.

SANDIA NATIONAL LABORATORIES IN SITU ELECTROKINETIC EXTRACTION TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

As a part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated the In-Situ Electrokinetic Extraction (ISEE) system at Sandia National Laboratories, Albuquerque, New Mexico.The SITE demonstration results show ...

An assessment of thermal destruction technologies for application to Department of Energy mixed wastes

International Nuclear Information System (INIS)

1991-08-01

As evidenced by the Department of Energy (DOE) Environmental Restoration and Waste Management Five-Year Plan, the Department is committing to a long-range waste management program. A category of waste that represents a sizable portion of the total DOE waste picture and also presents significant complications in management is waste that contains both hazardous and radioactive components. This category of wastes, referred to as mixed waste (MW), is present at all but a few of the Department's sites. The presence of radioactive constituents in this waste category implies that it be managed, like radioactive-only wastes, on DOE-owned property. Thermal treatment of MW's offers a variety of benefits in the final disposition of the waste. One obvious benefit is volume reduction of the waste if it contains organics because most of the organics are converted to gases and water, leaving only the inert material or ash. Another benefit is the destruction of hazardous materials by thermal conversion to simple, nonhazardous gases water. A third benefit, for some thermal technologies, is that the thermal process yields a process residue that meets disposal requirements for both hazardous and radioactive constituents without further processing. 2 refs., 47 figs., 8 tabs

Report by the AERES on the unit: Department of Nuclear Technology under the supervision of the establishments and bodies: Atomic Energy Commission (CEA)

International Nuclear Information System (INIS)

2010-02-01

This report is a kind of audit report on a research laboratory, the DTN (Department of Nuclear Technology) which comprises four departments: technology of industrial reactors, advanced technologies and processes, transfer modelling and nuclear measurements, thermal-hydraulic and technological studies. The authors discuss an assessment of the whole unit activities in terms of strengths and opportunities, aspects to be improved, risks and recommendations, productions and publications, scientific quality, influence and attractiveness (awards, recruitment capacity, capacity to obtain financing and to tender, participation to international programs), strategy and governance, and project. The same discussion is proposed for the different research themes: design of nuclear installation circuits and components, thermal-hydraulic and severe accidents, instrumentation for nuclear measurements and process control, transfers in reactors and in the environment

Hydrogen and Fuel Cell Transit Bus Evaluations : Joint Evaluation Plan for the U.S. Department of Energy and the Federal Transit Administration

Science.gov (United States)

2008-05-01

This document describes the hydrogen transit bus evaluations performed by the National Renewable Energy Laboratory (NREL) and funded by the U.S. Department of Energy (DOE) and the U.S. Department of Transportations Federal Transit Administration (...

Advanced energy design and operation technologies research: Recommendations for a US Department of Energy multiyear program plan

Energy Technology Data Exchange (ETDEWEB)

Brambley, M.R.; Crawley, D.B.; Hostetler, D.D.; Stratton, R.C.; Addision, M.S.; Deringer, J.J.; Hall, J.D.; Selkowitz, S.E.

1988-12-01

This document describes recommendations for a multiyear plan developed for the US Department of Energy (DOE) as part of the Advanced Energy Design and Operation Technologies (AEDOT) project. The plan is an outgrowth of earlier planning activities conducted for DOE as part of design process research under the Building System Integration Program (BSIP). The proposed research will produce intelligent computer-based design and operation technologies for commercial buildings. In this document, the concept is explained, the need for these new computer-based environments is discussed, the benefits are described, and a plan for developing the AEDOT technologies is presented for the 9-year period beginning FY 1989. 45 refs., 37 figs., 9 tabs.

Hazards Control Department annual technology review, 1987

Energy Technology Data Exchange (ETDEWEB)

Griffith, R.V.; Anderson, K.J. (eds.)

1988-07-01

This document describes some of the research performed in the LLNL Hazards Control Department from October 1986 to September 1987. The sections in the Annual report cover scientific concerns in the areas of Health Physics, Industrial Hygiene, Industrial Safety, Aerosol Science, Resource Management, Dosimetry and Radiation Physics, Criticality Safety, and Fire Science. For a broader overview of the types of work performed in the Hazards Control Department, we have also compiled a selection of abstracts of recent publications by Hazards Control employees. Individual reports are processed separately for the data base.

Idle reduction assessment for the New York State Department of Transportation region 4 fleet.

Science.gov (United States)

2015-03-01

Energetics Incorporated conducted a study to evaluate the operational, economic, and environmental impacts of advanced technologies to reduce idling in : the New York State Department of Transportation (NYSDOT) Region 4 fleet without compromising fun...

An assessment of off-gas treatment technologies for application to thermal treatment of Department of Energy wastes

International Nuclear Information System (INIS)

Dalton, J.D.; Gillins, R.L.; Harris, T.L.; Wollerman, A.L.

1992-09-01

The purpose of this report is to describe available air pollution control technologies for pollutants generated by thermal treatment of DOE wastes. A basic process for selecting air pollution control devices is summarized. Types of air pollutants generated by thermal treatment units are described, as well as the factors that influence the types and quantities of pollutants generated. This report also reviews applicable regulatory emission requirements. A listing of available and emerging air pollution control technologies and a brief introduction to the basic engineering principles involved in collecting each of the pollutants are presented. Section 7 of this report contains two types of evaluations for air pollution control devices. First, comparative evaluations of individual technologies are presented, based upon criteria generally relevant to DOE facilities. Using this evaluation system, the spray dryer absorber received the highest rating for acid-gas removal; high-efficiency particulate air (HEPA) filters received the highest rating for particulate removal; activated carbon adsorption received the highest rating for the removal of both toxic metals and residual hydrocarbons; and selective catalytic reduction received the highest rating for nitrogen oxide abatement. Also evaluated in Sect. 7 is the expected performance of different types of pollution control systems on two hypothetical waste streams. The waste streams were defined based upon typical DOE wastes and thermal treatment technologies. Section 8 presents conclusions for this report. Two appendixes are included with this report. The first appendix contains a brief description of all the technologies evaluated and the second lists of some of the vendors for each of the technologies that was evaluated

The value added of conducting regional versus local stakeholder involvement in evaluating technology acceptance

International Nuclear Information System (INIS)

McCabe, G.H.

1995-06-01

Battelle has conducted a three-year effort, funded by the U. S Department of Energy's (DOE) Office of Technology Development, to involve stakeholders in evaluating innovative technologies to clean up volatile organic compound (VOC) contamination at arid sites. Stakeholders have been encouraged to participate in the demonstration of these innovative technologies in order to improve decisions made by DOE and its contractors about technology development, demonstration, and deployment. The basic approach is to identify people and organizations with a stake in the remediation process, and hence in the demonstration of innovative technologies. Stakeholders have included public interest group and environmental group representatives, regulators, technology users, Native Americans, Hispanic community members, and local elected officials. These people are invited to be involved and they are presented with substantive information about the technologies. Their input in terms of identifying issues and concerns, defining the kinds of information needed from the demonstrations, and assessing the acceptability of the technologies for deployment, will help ensure that only broadly promising technologies are carried forward. This approach is designed to increase the likelihood of successful deployment of the new technologies needed to accomplish environmental restoration throughout the DOE complex and at private facilities. The hypothesis in conducting this regional stakeholder involvement program is that there will be different data requirements for different sites due to geographical, institutional, programmatic, and cultural differences at the sites. Identifying the broadest set of data requirements, collecting this information during the technology demonstration, and providing the results of the demonstration to stakeholders will enhance the acceptance of the technology at these sites and, thereby, enhance the technology's deployability

Evaluation of User Acceptance of Mixed Reality Technology

Science.gov (United States)

Yusoff, Rasimah Che Mohd; Zaman, Halimah Badioze; Ahmad, Azlina

2011-01-01

This study investigates users' perception and acceptance of mixed reality (MR) technology. Acceptance of new information technologies has been important research area since 1990s. It is important to understand the reasons why people accept information technologies, as this can help to improve design, evaluation and prediction how users will…

Curriculum Evaluation and Employers Opinions: the case study of Educational Technology Program in Bachelor Degree (Continuing Program

Directory of Open Access Journals (Sweden)

Nakhon Lalognam

2016-09-01

uncertain level, process aspect was at the high level and product aspect was at the high level. 2. The opinions of employers to the ideal characteristics were at the highest level and actual characteristics were at the high level. 3. The opinions to the requirements of the Educational Technology Program in Bachelor Degree (Continuing Program and knowledge implementation in work of graduate were: 3.1 The opinions of graduates, the curriculum committee and instructors to the Educational Technology Program in Bachelor Degree (Continuing Program were at the highest level. 3.2 The opinions of graduates to knowledge implementation in work at the high level. 4. The suggestions and guidelines for improving of the Educational Technology Program in Bachelor Degree (Continuing Program were as follows: 4.1 Context Evaluation Aspect: The results indicated that should improve philosophy, course outline, course description and course content of the curriculum appropriate to the current economic, social and technological and meet with requirements of learners and graduate – employers and specific psychomotor aspect which are used for existing of life in society. 4.2 Input Evaluation Aspect: Instructor should have knowledge which are the curriculum, specific specialization in subject, continually developing of new task and should make academic position for subjects which they teach that is promoting of strength of the curriculum. Department of Educational Technology manage training or seminar about techniques of pedagogy and learning process, the enhanced project about development of knowledge, attitude and basic psychomotor for learners, allocate budget and provide textbooks, hardware and software media and set up laboratory be adequate and appropriate for learner. 4.3 Process Evaluation Aspect: Instructional management requires both of theory and practice that instructors should explicitly determine and must use a variety of measurement, should get evaluation for every 4 years according

Designing and evaluating a balanced scorecard for a health information management department in a Canadian urban non-teaching hospital.

Science.gov (United States)

Nippak, Pria Md; Veracion, Julius Isidro; Muia, Maria; Ikeda-Douglas, Candace J; Isaac, Winston W

2016-06-01

This report is a description of a balanced scorecard design and evaluation process conducted for the health information management department at an urban non-teaching hospital in Canada. The creation of the health information management balanced scorecard involved planning, development, implementation, and evaluation of the indicators within the balanced scorecard by the health information management department and required 6 months to complete. Following the evaluation, the majority of members of the health information management department agreed that the balanced scorecard is a useful tool in reporting key performance indicators. These findings support the success of the balanced scorecard development within this setting and will help the department to better align with the hospital's corporate strategy that is linked to the provision of efficient management through the evaluation of key performance indicators. Thus, it appears that the planning and selection process used to determine the key indicators within the study can aid in the development of a balanced scorecard for a health information management department. In addition, it is important to include the health information management department staff in all stages of the balanced scorecard development, implementation, and evaluation phases. © The Author(s) 2014.

Evaluation and management of acute abdominal pain in the emergency department

Directory of Open Access Journals (Sweden)

Macaluso CR

2012-09-01

Full Text Available Christopher R Macaluso, Robert M McNamaraDepartment of Emergency Medicine, Temple University School of Medicine, Philadelphia, PA, USAAbstract: Evaluation of the emergency department patient with acute abdominal pain is sometimes difficult. Various factors can obscure the presentation, delaying or preventing the correct diagnosis, with subsequent adverse patient outcomes. Clinicians must consider multiple diagnoses, especially those life-threatening conditions that require timely intervention to limit morbidity and mortality. This article will review general information on abdominal pain and discuss the clinical approach by review of the history and the physical examination. Additionally, this article will discuss the approach to unstable patients with abdominal pain.Keywords: acute abdomen, emergency medicine, peritonitis

Health Information Technology Adoption in the Emergency Department.

Science.gov (United States)

Selck, Frederic W; Decker, Sandra L

2016-02-01

To describe the trend in health information technology (IT) systems adoption in hospital emergency departments (EDs) and its effect on ED efficiency and resource use. 2007-2010 National Hospital Ambulatory Medical Care Survey - ED Component. We assessed changes in the percent of visits to EDs with health IT capability and the estimated effect on waiting time to see a provider, visit length, and resource use. The percent of ED visits that took place in an ED with at least a basic health IT or an advanced IT system increased from 25.2 and 3.1 percent in 2007 to 69.1 and 30.6 percent in 2010, respectively (p < .05). Controlling for ED fixed effects, waiting times were reduced by 6.0 minutes in advanced IT-equipped EDs (p < .05), and the number of tests ordered increased by 9 percent (p < .01). In models using a 1-year lag, advanced systems also showed an increase in the number of medications and images ordered per visit. Almost a third of visits now occur in EDs with advanced IT capability. While advanced IT adoption may decrease wait times, resource use during ED visits may also increase depending on how long the system has been in place. We were not able to determine if these changes indicated more appropriate care. © Health Research and Educational Trust.

Utilising digital technology for dialogue and evaluation

DEFF Research Database (Denmark)

Kjærgaard, Thomas

2016-01-01

This article investigates how digital technology can enhance evaluation and eflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora...

Utilising digital technology for dialogue and evaluation

DEFF Research Database (Denmark)

Kjærgaard, Thomas

2016-01-01

This article investigates how digital technology can enhance evaluation and reflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora...

TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

Academic Standards for Developing, Implementing, Evaluating, and Improving Information Science and Technology Baccalaureate Degrees

Science.gov (United States)

Shields-Bryant, Elayne

2006-01-01

The unprecedented growth, development and implementation of information technology (IT) driven by e-commerce and other technological advances have resulted in an increased demand of technology skilled workers (Reichgelt, Zhang, & Price, 2002; United States Department of Labor Bureau of Labor Statistics, 2005). In response to degree-dependent…

Ultrasound assisted evaluation of chest pain in the emergency department.

Science.gov (United States)

Colony, M Deborah; Edwards, Frank; Kellogg, Dylan

2018-04-01

Chest pain is a commonly encountered emergency department complaint, with a broad differential including several life-threatening possible conditions. Ultrasound-assisted evaluation can potentially be used to rapidly and accurately arrive at the correct diagnosis. We propose an organized, ultrasound assisted evaluation of the patient with chest pain using a combination of ultrasound, echocardiography and clinical parameters. Basic echo techniques which can be mastered by residents in a short time are used plus standardized clinical questions and examination. Information is kept on a checklist. We hypothesize that this will result in a quicker, more accurate evaluation of chest pain in the ED leading to timely treatment and disposition of the patient, less provider anxiety, a reduction in the number of diagnostic errors, and the removal of false assumptions from the diagnostic process. Copyright © 2017 Elsevier Inc. All rights reserved.

A Logic Model for Evaluating the Academic Health Department.

Science.gov (United States)

Erwin, Paul Campbell; McNeely, Clea S; Grubaugh, Julie H; Valentine, Jennifer; Miller, Mark D; Buchanan, Martha

2016-01-01

Academic Health Departments (AHDs) are collaborative partnerships between academic programs and practice settings. While case studies have informed our understanding of the development and activities of AHDs, there has been no formal published evaluation of AHDs, either singularly or collectively. Developing a framework for evaluating AHDs has potential to further aid our understanding of how these relationships may matter. In this article, we present a general theory of change, in the form of a logic model, for how AHDs impact public health at the community level. We then present a specific example of how the logic model has been customized for a specific AHD. Finally, we end with potential research questions on the AHD based on these concepts. We conclude that logic models are valuable tools, which can be used to assess the value and ultimate impact of the AHD.

A Study of KHNP Nuclear Power Plant Technology Level Evaluation

International Nuclear Information System (INIS)

Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han

2016-01-01

KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning

A Study of KHNP Nuclear Power Plant Technology Level Evaluation

Energy Technology Data Exchange (ETDEWEB)

Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han [KHNP, Daejeon (Korea, Republic of)

2016-05-15

KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning.

US Department of Energy Integrated Resource Planning Program: Accomplishments and opportunities

Energy Technology Data Exchange (ETDEWEB)

White, D.L. [Oak Ridge National Lab., TN (United States); Mihlmester, P.E. [Aspen Systems Corp., Oak Ridge, TN (United States)

1993-12-17

The US Department of Energy Integrated Resource Planning Program supports many activities and projects that enhance the process by which utilities assess demand and supply options and, subsequently, evaluate and select resources. The US Department of Energy program coordinates integrated resource planning in risk and regulatory analysis; utility and regional planning; evaluation and verification; information transfer/technological assistance; and demand-side management. Professional staff from the National Renewable Energy Laboratory, Oak Ridge National Laboratory, Lawrence Berkeley Laboratory, and Pacific Northwest Laboratories collaborate with peers and stakeholders, in particular, the National Association of Regulatory Utility Commissioners, and conduct research and activities for the US Department of Energy. Twelve integrated resource planning activities and projects are summarized in this report. The summaries reflect the diversity of planning and research activities supported by the Department. The summaries also reflect the high levels of collaboration and teaming that are required by the Program and practiced by the researchers. It is concluded that the Program is achieving its objectives by encouraging innovation and improving planning and decision making. Furthermore, as the Department continues to implement planned improvements in the Program, the Department is effectively positioned to attain its ambitious goals.

The Center for Environmental Technology Innovative Technology Screening Process

International Nuclear Information System (INIS)

Bertrand, C.M.

1995-02-01

The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

An evaluation on the impact of national cancer wait targets on a (UK) radiotherapy department

International Nuclear Information System (INIS)

Roberts, Neill

2012-01-01

The radiotherapy department in this evaluation has been working towards full compliance with national cancer wait targets (CWT) since their implementation. 31 and 62 day targets set a maximum time frame for cancer patients to commence treatment. This evaluation explored the impact of these targets on staff and patients within the radiotherapy department and their overall impact on the radiotherapy service. Methods: This evaluation followed a mixed method approach of sequential triangulation. Qualitative data collection and analysis dominate findings but existing quantitative data, available within the department, was used to support the overall findings. Staff and patient interviews were used to establish attitudes to and experiences of the CWT initiative in relation to radiotherapy treatment. Quantitative data was taken from the local Cancer Centre CWT database that tracks patients referred for radiotherapy. Findings and Conclusion: Qualitative data analysis identified four main themes: pressure, appropriateness of target lengths, quality of treatment provided and efficiency of working practices within the department. Responses within these themes were both positive and negative with patients mainly the former and staff the latter. Quantitative evaluation found an increased monitoring and management burden from the CWT initiative, primarily for administrative, clerical and managerial staff. The main impact of the CWT initiative was an increase in pressure on staff due to reduced time to prepare and deliver treatment. Patients felt the initiative had not impacted negatively on their care and experienced a reduction in anxiety due to a reduction in waiting time.

Department of Plasma Physics and Technology - Overview

International Nuclear Information System (INIS)

Sadowski, M.J.

2007-01-01

In 2006 research activity of the P-V Department was concentrated on the continuation of previous studies in the field of plasma physics and controlled nuclear fusion (CNF), but several new topics concerning plasma technology were also investigated. The main tasks of the research activities were as follows: 1. Studies of physical phenomena in pulsed discharges producing dense magnetized plasma; 2. Development of methods and tools for high-temperature plasma diagnostics; 3. Research in the field of plasma technologies. In a frame of the first task particular attention was paid to studies of X-ray pulses and fast electron beams emitted from different Plasma-Focus (PF) facilities. The correlation of X-ray pulses with pulsed electron beams and other corpuscular emissions (i.e. accelerated primary ions and fusion reaction products) was investigated in the PF-360 device in Swierk. The X-ray and corpuscular emission was also studied in a PF-1000 facility at IPPLM in Warsaw. Separate efforts were devoted to the investigation of fast electrons escaping from Tokamak-type facilities. Such studies were carried out in a frame of the EURATOM program, using special Cerenkov-type detectors within the CASTOR tokamak, operated at IPP in Prague. Signals from the Cerenkov detector were recorded and interpreted. Other studies concerned the design and construction of a new 4-channel Cerenkov detection system for a TORE-SUPRA facility at CEA-Cadarache. Since thermal loads upon the Cerenkov probe within the TORE SUPRA facility can amount to 1 MW/cm 2 , it was necessary to perform detailed computations of heat transfer in various materials (i.e. diamond-radiators and the probe body). Some efforts were devoted to the calibration of new nuclear track detectors (NTD) and their application for measurements of fusion-produced protons emitted from PF-360 and PF-1000 facilities. In frame of the EURATOM program the calibrated NTD were also applied for measurements of fusion-protons in a TEXTOR

Methane mitigation timelines to inform energy technology evaluation

Science.gov (United States)

Roy, Mandira; Edwards, Morgan R.; Trancik, Jessika E.

2015-11-01

Energy technologies emitting differing proportions of methane (CH4) and carbon dioxide (CO2) vary significantly in their relative climate impacts over time, due to the distinct atmospheric lifetimes and radiative efficiencies of the two gases. Standard technology comparisons using the global warming potential (GWP) with a fixed time horizon do not account for the timing of emissions in relation to climate policy goals. Here we develop a portfolio optimization model that incorporates changes in technology impacts based on the temporal proximity of emissions to a radiative forcing (RF) stabilization target. An optimal portfolio, maximizing allowed energy consumption while meeting the RF target, is obtained by year-wise minimization of the marginal RF impact in an intended stabilization year. The optimal portfolio calls for using certain higher-CH4-emitting technologies prior to an optimal switching year, followed by CH4-light technologies as the stabilization year approaches. We apply the model to evaluate transportation technology pairs and find that accounting for dynamic emissions impacts, in place of using the static GWP, can result in CH4 mitigation timelines and technology transitions that allow for significantly greater energy consumption while meeting a climate policy target. The results can inform the forward-looking evaluation of energy technologies by engineers, private investors, and policy makers.

Methane mitigation timelines to inform energy technology evaluation

International Nuclear Information System (INIS)

Roy, Mandira; Edwards, Morgan R; Trancik, Jessika E

2015-01-01

Energy technologies emitting differing proportions of methane (CH 4 ) and carbon dioxide (CO 2 ) vary significantly in their relative climate impacts over time, due to the distinct atmospheric lifetimes and radiative efficiencies of the two gases. Standard technology comparisons using the global warming potential (GWP) with a fixed time horizon do not account for the timing of emissions in relation to climate policy goals. Here we develop a portfolio optimization model that incorporates changes in technology impacts based on the temporal proximity of emissions to a radiative forcing (RF) stabilization target. An optimal portfolio, maximizing allowed energy consumption while meeting the RF target, is obtained by year-wise minimization of the marginal RF impact in an intended stabilization year. The optimal portfolio calls for using certain higher-CH 4 -emitting technologies prior to an optimal switching year, followed by CH 4 -light technologies as the stabilization year approaches. We apply the model to evaluate transportation technology pairs and find that accounting for dynamic emissions impacts, in place of using the static GWP, can result in CH 4 mitigation timelines and technology transitions that allow for significantly greater energy consumption while meeting a climate policy target. The results can inform the forward-looking evaluation of energy technologies by engineers, private investors, and policy makers. (letter)

Introduction of new technologies and decision making processes: a framework to adapt a Local Health Technology Decision Support Program for other local settings.

Science.gov (United States)

Poulin, Paule; Austen, Lea; Scott, Catherine M; Poulin, Michelle; Gall, Nadine; Seidel, Judy; Lafrenière, René

2013-01-01

Introducing new health technologies, including medical devices, into a local setting in a safe, effective, and transparent manner is a complex process, involving many disciplines and players within an organization. Decision making should be systematic, consistent, and transparent. It should involve translating and integrating scientific evidence, such as health technology assessment (HTA) reports, with context-sensitive evidence to develop recommendations on whether and under what conditions a new technology will be introduced. However, the development of a program to support such decision making can require considerable time and resources. An alternative is to adapt a preexisting program to the new setting. We describe a framework for adapting the Local HTA Decision Support Program, originally developed by the Department of Surgery and Surgical Services (Calgary, AB, Canada), for use by other departments. The framework consists of six steps: 1) development of a program review and adaptation manual, 2) education and readiness assessment of interested departments, 3) evaluation of the program by individual departments, 4) joint evaluation via retreats, 5) synthesis of feedback and program revision, and 6) evaluation of the adaptation process. Nine departments revised the Local HTA Decision Support Program and expressed strong satisfaction with the adaptation process. Key elements for success were identified. Adaptation of a preexisting program may reduce duplication of effort, save resources, raise the health care providers' awareness of HTA, and foster constructive stakeholder engagement, which enhances the legitimacy of evidence-informed recommendations for introducing new health technologies. We encourage others to use this framework for program adaptation and to report their experiences.

Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.

Energy Technology Data Exchange (ETDEWEB)

Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

2006-09-01

The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

Mixed reaction to science department proposal

Science.gov (United States)

The recommendation last month by a presidential commission that a federal Department of Science and Technology be created to encompass “major civilian research and development (R&D) agencies” has elicited a mixed reaction from members of the geophysical sciences community.The Commission on Industrial Competitiveness, created by President Ronald Reagan in June 1983 to study ways to strengthen the ability of the United States to compete in a global marketplace, recommended establishment of a Cabinet-level science department “to promote national interest in and policies for research and technological innovation.” The commission, chaired by John A. Young, president of the Hewlett-Packard Company, was composed primarily of presidents and chief executive officers of major technology corporations but also included members of academia and government. Creation of a federal science and technology 'department is one of many suggestions contained in the commission's final report, Global Competition: The New Reality.

US Department of Energy Three Mile Island research and development program. 1985 annual report

International Nuclear Information System (INIS)

Brown, G.R.

1986-04-01

In 1985, the US Department of Energy's Three Mile Island Research and Development Program at Three Mile Island Unit 2 (TMI-2), the Idaho National Engineering Laboratory, and other supporting laboratories, concentrated on three major areas: fuel and waste handling and disposition, accident evaluation, and reactor evaluation. While the general technology being developed is of direct benefit to the recovery operations at TMI-2, this technology will be of generic benefit to the entire nuclear power industry. Others engaged in research and development, design, construction, operation, maintenance, and regulation of nuclear plants will have access to this technology to enhance plant safety and reliability

Department of Material Studies - Overview

International Nuclear Information System (INIS)

Werner, Z.

2009-01-01

Full text: The technology of modifying surfaces of technological materials by means of continuous and pulsed energy and particle beams has been intensely studied for more than 20 years. In some fields, it is currently utilized on a wide scale in industry. Continuous or pulsed ion and plasma beams play a significant role among various approaches used in this area. The research carried by Department P-IX is centered on applications of our two ion implantation facilities (ion implanters) of different kinds and unique sources of high-intensity intense plasma pulses, operated by the Department of Plasma Physics. The Department cooperates closely with Forschungszentrum Rossendorf (FZR, Dresden, Germany) in the field of analytical ion beam techniques and the use of unique ion implantation facilities. The main objectives of the Department are: · the search for new ways of modifying the surface properties of solid materials by means of continuous or pulsed ion and plasma beams and · the implementation of ion implantation techniques in national industries as a method of improving the lifetime of machine parts and tools utilized in industry. In 2008, research was focused on: · ion implantation/plasma treatment of ceramics aimed at improving their wettability in ceramic-metal joints, · ion beam synthesis and plasma pulse activation of superconducting MgB 2 phases, · cobalt and zirconium inclusions in conducting layers produced in oxide insulators (Al 2 O 3 ) by ion implantation and thermal annealing. Research was conducted in cooperation with Department P-V of IPJ, Institute of Nuclear Chemistry and Technology (Warsaw), Warsaw University of Technology, Institute of Technology of Materials for Electronics (Warsaw), Institute of Molecular Physics, Polish Academy of Sciences (Poznan), Institute of Chemical Physics PAS and Forschungszentrum Rossendorf FZR (Dresden, Germany), as well as with some industrial companies. (author)

VOC reduction technology deveolpment as part of the U.S. Department of Energy, Industrial Waste Reduction Program

International Nuclear Information System (INIS)

Cranford, B.

1993-01-01

A strong industry is vital to U.S. Economic health and prosperity, but U.S. industry is facing serious challenges both domestically and internationally. One of these challenges is the reduction of volatile organic compounds emissions from industrial processes and products. To assist industry with these challenges, the U.S. Department of Energy established the Industrial Waste Reduction Program to improve energy efficiency and competitiveness to private industry through cost-effective waste material reduction. This paper describes the programs and the use of joint partnerships between the Department of Energy, industry, national laboratories, universities and others, in developing technologies which reduce VOC emissions while improving energy efficiency. This paper also describes the process and selection criteria for participation in the program, and briefly describes the following five VOC reduction technologies under development: Dual Cure Coatings, Solvent Reduction through use of a No-clean Soldering Process, Solvent Waste Minimization by Supercritical CO 2 Cleaning Process, ethanol Recovery Process, and Membrane Vapor Recovery Systems. The VOC reductions as well as the energy savings and other benefits to the U.S. are discussed

34 CFR 300.6 - Assistive technology service.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Assistive technology service. 300.6 Section 300.6 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION... selection, acquisition, or use of an assistive technology device. The term includes— (a) The evaluation of...

Department of Accelerator Physics and Technology - Overview

International Nuclear Information System (INIS)

Wronka, S.

2010-01-01

Full text: The activity of the P-10 department is focused on the development of new acceleration techniques and technology, as well as on applications of particle accelerators. Our team is able to perform all kind of calculations of research, medical and industrial accelerator components, including accelerating cavities, magnets, transfer lines, sources and targets, collimators and applicators. The main topic of the 2010 was the realization of the ' Accelerators and Detectors ' project. All results of this work are included in detailed descriptions of the particular machines. The other tasks are summarized below: 1) WP-06 Task in the European XFEL Project As part of the EXFEL preparatory phase, IPJ is developing HOM and Pickup output lines from superconducting cavities antennas, and Beam Line Absorbers of travelling HOM. This abridged WP-06 task is wholly realized by IPJ and belongs to WPG-1 (Work Package Group 1- Cold linac). The HOM couplers are used to extract and to dissipate Radio Frequency ('' RF '') energy present in the cavity due to the excitation of the HOMs by the electron beam bunches. The low frequency part of the HOM spectrum (below the cut-off frequency of the beam tube) will be extracted by HOM couplers and transmitted via coax lines to external loads. Each 9-cell cavity is equipped with two HOM couplers placed close to the end cells and working in a 2K environment. The propagating HOM power will be ca. 5.4 W/cryomodule for operation with 40000 bunches/s of a nominal charge of 1 nCoulomb. Power dissipated in BLA will be transferred to the 70 K environment by a copper stub brazed directly to the absorbing ceramic ring. The stub holds the ring in a stainless steel vacuum chamber thermally isolated from the 2K region by a flexible bellows. In 2010 the wakefields excited by beam bunches down to 40 microns were calculated, and the related wake potential and frequency spectrum of HOMs evaluated. The absorbing material (CA137 of Ceradyne Enterprice

Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part B, Remedial Action

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1 and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the ranking os remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. The focus of Vol. 1, Pt. B, is RA, and it has been divided into six chapters. The first chapter is an introduction, which defines problems specific to the ER Program for ORNL. Chapter 2 provides a general overview of the TLD. Chapters 3 through 5 are organized into necessary subelement categories: RA, characterization, and robotics and automation. The final chapter contains regulatory compliance information concerning RA.

U.S. Department of Energy Hydrogen and Fuel Cells Program 2014 Annual Merit Review and Peer Evaluation Report: June 16-20, 2014, Washington, D.C.

Energy Technology Data Exchange (ETDEWEB)

2014-10-01

The fiscal year (FY) 2014 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting (AMR), in conjunction with DOE's Vehicle Technologies Office AMR, was held from June 16-20, 2014, at the Washington Marriott Wardman Park in Washington, D.C. This report is a summary of comments by AMR peer reviewers about the hydrogen and fuel cell projects funded by DOE's Office of Energy Efficiency and Renewable Energy (EERE).

Energetic and economic evaluations on hydrogen storage technologies

Energy Technology Data Exchange (ETDEWEB)

Arca, S.; Di Profio, P.; Germani, R. [Perugia Univ., Perugia (Italy). Centro di Eccellenza Materiali Innovativi Nanostrutturati, Dip. Chimica; Savelli, G.; Cotana, F.; Rossi, F.; Amantini, M. [Universita degli Studi di Perugia, Perugia (Italy). Dipartimento di Ingegneria Industriale, Sezione di Fisica Tecnica

2008-07-01

With the development of the hydrogen economy and fuel cell vehicles, a major technological issue has emerged regarding the storage and delivery of large amounts of hydrogen. Several hydrogen storage methodologies are available while other technologies are being developed aside from the classical compression and liquefaction of hydrogen. A novel technology is also in rapid process, which is based on clathrate hydrates of hydrogen. The features and performances of available storage systems were evaluated in an effort to determine the best technology throughout the hydrogen chain. For each of the storage solutions presented, the key parameters were compared. These key parameters included interaction energy between hydrogen and support; real and practical storage capacity; and specific energy consumption. The paper presented the study methods and discussed hydrogen storage technologies using compressed hydrogen; metal hydrides; liquefied hydrogen; carbon nanotubes; ammonia; and gas hydrates. Carbon dioxide emissions were also evaluated for each storage system analyzed. The paper also presented the worst scenario. It was concluded that a technology based on clathrate hydrates of hydrogen, while being far from optimized, was highly competitive with the classical approaches. 21 refs., 9 figs.

TECHNOLOGY EVALUATION REPORT: SILICATE TECHNOLOGY CORPORATION - SOLIDIFICATION/STABILIZATION OF PCP AND INORGANIC CONTAMINANTS IN SOILS - SELMA, CA

Science.gov (United States)

This Technolgy Evaluation Report evaluates the solidification/stabilization process of Silicate Technology Corporation (STC) for the on-site treatment of contaminated soil The STC immobilization technology uses a proprietary product (FMS Silicate) to chemically stabilize and ...

Embedding technology into inter-professional best practices in home safety evaluation.

Science.gov (United States)

Burns, Suzanne Perea; Pickens, Noralyn Davel

2017-08-01

To explore inter-professional home evaluators' perspectives and needs for building useful and acceptable decision-support tools for the field of home modifications. Twenty semi-structured interviews were conducted with a range of home modification professionals from different regions of the United States. The interview transcripts were analyzed with a qualitative, descriptive, perspective approach. Technology supports current best practice and has potential to inform decision making through features that could enhance home evaluation processes, quality, efficiency and inter-professional communication. Technological advances with app design have created numerous opportunities for the field of home modifications. Integrating technology and inter-professional best practices will improve home safety evaluation and intervention development to meet client-centred and societal needs. Implications for rehabilitation Understanding home evaluators technology needs for home safety evaluations contributes to the development of app-based assessments. Integrating inter-professional perspectives of best practice and technological needs in an app for home assessments improves processes. Novice and expert home evaluators would benefit from decision support systems embedded in app-based assessments. Adoption of app-based assessment would improve efficiency while remaining client-centred.

Department of Accelerator Physics and Technology: Overview

International Nuclear Information System (INIS)

Pachan, M.

1998-01-01

(full text) In the context of general discussions concerning the activity of the Institute, it was important to look critically at current and future directions at the Department's activity. Attention is given to development of basic accelerator knowledge, realized at home and throughout international collaborations. Of importance is a steady improvement of metrological and experimental basis for accelerator research. Apart of this, some development tendencies were formulated during 1997, oriented to application fields of accelerators. As examples should be named: - medical applications: a) A serious effort was given to an idea of using the existing compact cyclotron C-30 as a source for creation of a diagnostic centre in Swierk. The proposition was formulated in contact with the Nuclear Medicine Department of the Medical Academy, and the ''Brodno'' General Hospital. In spite of declared medical interest in such an installation, the project was not approved, due to lack of proper financial support. b) Model measurements and verification of theoretical assumptions and calculations oriented on the design of a very short, high-gradiented acceleration structure for the low energy accelerator COLINE/1000 were done. This project will enable us to achieve ''source - isocentre distance'', of 1000 mm, instead of existing 800 mm. This is important for therapy. In 1998, this work will be supported by the State Committee for Scientific Research. c) Preliminary discussions, and design approach were undertaken in collaboration with the Centre of Oncology, for elaboration of a movable low-energy accelerator with electron beam output, matched to inter operational irradiation during surgical therapy of tumours. - applications in radiation technology: Comparison of isotope and machine radiation sources indicates that, under Polish conditions it is reasonable to use purpose-oriented high power accelerators. The working group composed of specialists from IChTJ and IPJ prepared the

KEK Engineering Department -activity report FY 2003

International Nuclear Information System (INIS)

2005-03-01

This report includes all kinds of activities of the Engineering Department of KEK from 2002 to 2003 FY. There are fourteen chapters, which contain KEK Prize for engineering, KEK meeting of engineering technologies, Engineering Seminar, COACK (Component Oriented Advanced Control Kernel) for cooperation R and D project, Forum on engineering technologies from 1998 to 2003 FY, Engineering Department Symposium, service trainings, Engineering Department research study, English training, training for professional worker, training for technical expert, report on joint training for technical expert, training for middle school students, and the Engineering Department system and the main events from 1971 to 2003. (S.Y. )

Technology Evaluation Workshop Report for Tank Waste Chemical Characterization

International Nuclear Information System (INIS)

Eberlein, S.J.

1994-04-01

A Tank Waste Chemical Characterization Technology Evaluation Workshop was held August 24--26, 1993. The workshop was intended to identify and evaluate technologies appropriate for the in situ and hot cell characterization of the chemical composition of Hanford waste tank materials. The participants were asked to identify technologies that show applicability to the needs and good prospects for deployment in the hot cell or tanks. They were also asked to identify the tasks required to pursue the development of specific technologies to deployment readiness. This report describes the findings of the workshop. Three focus areas were identified for detailed discussion: (1) elemental analysis, (2) molecular analysis, and (3) gas analysis. The technologies were restricted to those which do not require sample preparation. Attachment 1 contains the final workshop agenda and a complete list of attendees. An information package (Attachment 2) was provided to all participants in advance to provide information about the Hanford tank environment, needs, current characterization practices, potential deployment approaches, and the evaluation procedure. The participants also received a summary of potential technologies (Attachment 3). The workshop opened with a plenary session, describing the background and issues in more detail. Copies of these presentations are contained in Attachments 4, 5 and 6. This session was followed by breakout sessions in each of the three focus areas. The workshop closed with a plenary session where each focus group presented its findings. This report summarizes the findings of each of the focus groups. The evaluation criteria and information about specific technologies are tabulated at the end of each section in the report. The detailed notes from each focus group are contained in Attachments 7, 8 and 9

Stimulation Technologies for Deep Well Completions

Energy Technology Data Exchange (ETDEWEB)

Stephen Wolhart

2005-06-30

The Department of Energy (DOE) is sponsoring the Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies conducted a study to evaluate the stimulation of deep wells. The objective of the project was to review U.S. deep well drilling and stimulation activity, review rock mechanics and fracture growth in deep, high-pressure/temperature wells and evaluate stimulation technology in several key deep plays. This report documents results from this project.

75 FR 8043 - National Medal of Technology and Innovation Nomination Evaluation Committee

Science.gov (United States)

2010-02-23

... balance, the Department is seeking additional nominations of candidates from small, medium-sized, and large businesses or with special expertise in the following sub-sectors of the technology enterprise...

Natural phenomena evaluation of the Department of Energy-field office Oak Ridge office buildings

International Nuclear Information System (INIS)

Rucker, R.W.; Fricke, K.E.; Hunt, R.J.

1991-01-01

The Department of Energy - Field Office Oak Ridge (DOE-OR) is performing natural phenomena evaluations of existing office buildings located in the city of Oak Ridge, Tennessee. The natural phenomena considered are earthquake, wind, and flood. The evaluations are being performed to determine if the facilities are in compliance with DOE General Design Criteria 6430.IA. This paper presents results of the evaluations for three of the office buildings

Health services research evaluation principles. Broadening a general framework for evaluating health information technology.

Science.gov (United States)

Sockolow, P S; Crawford, P R; Lehmann, H P

2012-01-01

Our forthcoming national experiment in increased health information technology (HIT) adoption funded by the American Recovery and Reinvestment Act of 2009 will require a comprehensive approach to evaluating HIT. The quality of evaluation studies of HIT to date reveals a need for broader evaluation frameworks that limits the generalizability of findings and the depth of lessons learned. Develop an informatics evaluation framework for health information technology (HIT) integrating components of health services research (HSR) evaluation and informatics evaluation to address identified shortcomings in available HIT evaluation frameworks. A systematic literature review updated and expanded the exhaustive review by Ammenwerth and deKeizer (AdK). From retained studies, criteria were elicited and organized into classes within a framework. The resulting Health Information Technology Research-based Evaluation Framework (HITREF) was used to guide clinician satisfaction survey construction, multi-dimensional analysis of data, and interpretation of findings in an evaluation of a vanguard community health care EHR. The updated review identified 128 electronic health record (EHR) evaluation studies and seven evaluation criteria not in AdK: EHR Selection/Development/Training; Patient Privacy Concerns; Unintended Consequences/ Benefits; Functionality; Patient Satisfaction with EHR; Barriers/Facilitators to Adoption; and Patient Satisfaction with Care. HITREF was used productively and was a complete evaluation framework which included all themes that emerged. We can recommend to future EHR evaluators that they consider adding a complete, research-based HIT evaluation framework, such as HITREF, to their evaluation tools suite to monitor HIT challenges as the federal government strives to increase HIT adoption.

Introduction of new technologies and decision making processes: a framework to adapt a Local Health Technology Decision Support Program for other local settings

Directory of Open Access Journals (Sweden)

Poulin P

2013-11-01

Full Text Available Paule Poulin,1 Lea Austen,1 Catherine M Scott,2 Michelle Poulin,1 Nadine Gall,2 Judy Seidel,3 René Lafrenière1 1Department of Surgery, 2Knowledge Management, 3Public Health Innovation and Decision Support, Alberta Health Services, Calgary, AB, Canada Purpose: Introducing new health technologies, including medical devices, into a local setting in a safe, effective, and transparent manner is a complex process, involving many disciplines and players within an organization. Decision making should be systematic, consistent, and transparent. It should involve translating and integrating scientific evidence, such as health technology assessment (HTA reports, with context-sensitive evidence to develop recommendations on whether and under what conditions a new technology will be introduced. However, the development of a program to support such decision making can require considerable time and resources. An alternative is to adapt a preexisting program to the new setting. Materials and methods: We describe a framework for adapting the Local HTA Decision Support Program, originally developed by the Department of Surgery and Surgical Services (Calgary, AB, Canada, for use by other departments. The framework consists of six steps: 1 development of a program review and adaptation manual, 2 education and readiness assessment of interested departments, 3 evaluation of the program by individual departments, 4 joint evaluation via retreats, 5 synthesis of feedback and program revision, and 6 evaluation of the adaptation process. Results: Nine departments revised the Local HTA Decision Support Program and expressed strong satisfaction with the adaptation process. Key elements for success were identified. Conclusion: Adaptation of a preexisting program may reduce duplication of effort, save resources, raise the health care providers' awareness of HTA, and foster constructive stakeholder engagement, which enhances the legitimacy of evidence

A strategic framework for proliferation resistance: a systematic approach for the identification and evaluation of technology opportunities to enhance the proliferation resistance of civilian nuclear energy systems

International Nuclear Information System (INIS)

Hassberger, J.A.; Isaac, T.; Schock, R.N.

2001-01-01

The United State Department of Energy Nuclear Energy Research Advisory Committee recently completed a study ''Technological Opportunities To Increase The Proliferation Resistance Of Global Civilian Nuclear Power Systems (TOPS)''. That effort included the development of a set of both intrinsic and extrinsic barriers to proliferation that technologies can directly impact. In this paper we will review these barriers as and framework for assisting in the evaluation of the relative proliferation resistance of various nuclear fuel cycles, technologies and alternatives. (author)

DOE (Department of Energy) natural phenomena guidelines earthquake design and evaluation

International Nuclear Information System (INIS)

Short, S.A.; Murray, R.C.; Kennedy, R.P.

1989-01-01

Design and evaluation guidelines for DOE (Department of Energy) facilities subjected to earthquake, wind/tornado, and flood have been developed. This paper describes the philosophy and procedures fr the design or evaluation of facilities for earthquake ground shaking. The guidelines are intended to meet probabilistic-based performance goals expressed in terms of annual probability of exceedance of some level of structural damage. Meeting performance goals can be accomplished by specifying hazard probabilities of exceedance along with seismic behavior evaluation procedures in which the level of conservatism introduced is controlled such that desired performance can be achieved. Limited inelastic behavior is permitted by permitting demand determined from elastic response spectrum analyses to exceed capacity by an allowable inelastic demand-capacity ratio specified in the guidelines for different materials and construction

Technology Development Benefits and the Economics Breakdown Structure

Science.gov (United States)

Shaw, Eric J.

1998-01-01

This paper describes the construction and application of the EBS (Economics Breakdown Structure) in evaluating technology investments across multiple systems and organizations, illustrated with examples in space transportation technology. The United States Government (USG) has a long history of investing in technology to enable its missions. Agencies such as the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD) have evaluated their technology development programs primarily on their effects on mission performance and cost. More and more, though, USG agencies are being evaluated on their technology transfer to the commercial sector. In addition, an increasing number of USG missions are being accomplished by industry-led or joint efforts, where the USG provides technology and funding but tasks industry with development and operation of the mission systems.

SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Third Results Reports

Energy Technology Data Exchange (ETDEWEB)

Eudy, L.; Chandler, K.

2012-05-01

This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. NREL has previously published two reports documenting the operation of the fuel cell bus in service. This report provides a summary of the results with a focus on the bus operation from July 2011 through January 2012.

Evaluation of radiation protection of the radiotherapy department in cancer hospital

International Nuclear Information System (INIS)

Feng Ningyuan; Zhang Hongzhi; Yu Yun

1987-01-01

In this paper, the emphases are put on the description of design principle and calculation method for radiation protection in the new radiotherapy department of Cancer Research Institute and Hospital, Chinese Academy of Medical Science, as well as the evaluation of meusaring results. In addition, the problem of photo-neutron contamination among 16 MV X-ray from SL 75-20 Philips Linear Accelerator and its relavent shielding measures have been discussed

2013 Bioenergy Technologies Office Peer Review Report

Energy Technology Data Exchange (ETDEWEB)

None, None

2014-02-01

This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2013 U.S. Department of Energy Bioenergy Technologies Office's Peer Review meeting.

Reactor Engineering Department annual report

International Nuclear Information System (INIS)

Matsuura, S.; Nakahara, Y.; Takano, H.

1983-09-01

Research and development activities in the Department of Reactor Engineering in fiscal 1982 are described. The work of the Department is closely related to development of multipurpose Very High Temperature Gas Cooled Reactor and Fusion Reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Since fiscal 1982, Systematic research and development work on safeguards technology has been added to the activities of the Department. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, integral experiment and analysis, fusion neutronics, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, and safeguards technology, and activities of the Committee on Reactor Physics. (author)

The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This document has been prepared by the US Department of Energy`s (DOE`s) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE`s Operations Office and Energy Technology Centers.

The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

International Nuclear Information System (INIS)

1996-03-01

This document has been prepared by the US Department of Energy's (DOE's) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT ampersand E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE's Operations Office and Energy Technology Centers

Evaluation of Brine Processing Technologies for Spacecraft Wastewater

Science.gov (United States)

Shaw, Hali L.; Flynn, Michael; Wisniewski, Richard; Lee, Jeffery; Jones, Harry; Delzeit, Lance; Shull, Sarah; Sargusingh, Miriam; Beeler, David; Howard, Jeanie;

Department of Radiation Detectors: Overview

International Nuclear Information System (INIS)

Piekoszewski, J.

1998-01-01

(full text) Work carried out in 1997 in the Department of Radiation Detectors concentrated on three subjects: (i) Semiconductor Detectors (ii) X-ray Tube Generators (iii) Material Modification using Ion and Plasma Beams. Semiconductor detectors: Semiconductor detectors of ionizing radiation are among the basic tools utilized in such fields of research and industry as nuclear physics, high energy physics, medical (oncology) radiotherapy, radiological protection, environmental monitoring, energy dispersive X-ray fluorescence non-destructive analysis of chemical composition, nuclear power industry. The Department all objectives are: - search for new types of detectors, - adapting modern technologies (especially of industrial microelectronics) to detector manufacturing, - producing unique detectors tailored for physics experiments, - manufacturing standard detectors for radiation measuring instruments, - scientific development of the staff. These 1997 objectives were accomplished particularly by: - research on unique detectors for nuclear physics (e.g. transmission type Si(Li) detectors with extremely thin entrance and exit window), - development of technology of high-resistivity (HRSi) silicon detectors and thermoelectric cooling systems (KBN grant), - study of the applicability of industrial planar technology in producing detectors, - manufacturing detectors developed in previous years, re-generating and servicing customer detectors of various origin. In accomplishing of the above, the Department cooperated with interested groups of physicists from our Institute (P-I and P-II Departments), Warsaw University, Warsaw Heavy Ion Laboratory and with some technology Institutes based in Warsaw (ITME, ITE). Some detectors and services have been delivered to customers on a commercial basis. X-Rat tube generators: The Department conducts research on design and technology of producing X-ray generators based on X-ray tubes of special construction. In 1997, work on a special

Evaluation of selected sewage sludge gasification technological parameters

Science.gov (United States)

Gałko, Grzegorz; Król, Danuta

2018-02-01

Evaluation of selected sewage sludge gasification technological parameters was shown in this paper. Degree of carbon conducted in combustible substance and syngas efficiency (technological readiness coefficient) in accordance with equations were calculated. Enthalpy of individual compounds formation and energy balance were calculated in accordance with rule of Hess.

Technology Catalogue. First edition

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

The Department of Energy`s Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM`s Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department`s clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD`s applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina).

[The evaluation of academic emergency department design].

Science.gov (United States)

Deniz, Turgut; Aydinuraz, Kuzey; Oktay, Cem; Saygun, Meral; Ağalar, Fatih

2007-01-01

In our study which was based upon a questionnaire, the inner and outer architectural designs of emergency services of Emergency Medicine Departments were investigated. In this descriptive study, a standard questionnaire was sent to 26 Emergency Medicine Departments which were operating at that time. In the questionnaire, the internal, external architectural and functional features were questioned. Answers of 22 Emergency Medicine Departments were analysed. Two Emergency Medicine Departments that were not operating at that time were not included in the study. The analysis of the replies revealed that only 59% (n=13) of the Emergency Medicine Departments were designed as an emergency service prior to the construction. The ambulance parking areas were not suitable in 77% of the emergency units while only 54.5% (n=12) had protection against adverse weather conditions. In only 59% (n=13) of the emergency units, a triage unit was present and in only one of the in only one (4.5%), a decontamination room was available. It was understood that only 32% (n=8) of the emergency units were appropriate in enlarging their capacity taking the local risk factors into consideration. There was a toilette for disabled patients in only 18% (n=4) of the units as well. Considering a 12-year of history of the Emergency Medicine in Turkey, the presence of a lecture room is still 68% (n=15) in emergency departments which reflects that academic efforts in this field is emerging in challenging physical conditions. The results of our study revealed that emergency service architecture was neglected in Turkey and medical care given was precluded by the insufficient architecture. The design of emergency services has to be accomplished under guidance of scientific data and rules taking advices of architects who have knowledge and experience on this field.

Causes of poisoning in patients evaluated in a hospital emergency department in Konya, Turkey

International Nuclear Information System (INIS)

Kara, H.; Bayir, A.; Degirmenci, S.; Akinci, M.; Ak, A.; Azap, M.

2014-01-01

Objectives: To evaluate demographic and clinical characteristics of patients with poisoning at a community hospital. Methods: The retrospective study comprised records of patients who were admitted to the emergency department of Konya Numune Hospital, Turkey, because of poisoning between January 1, 2009, and December 31, 2011. Data was evaluated for age, gender, educational status, occupation, arrival time, mechanism of intoxication , body temperature, pulse, respiratory rate, Glasgow Coma Scale score, treatment applied, duration of hospital stay, duration of follow-up, test results, final diagnosis, clinical disposition, and outcome. Agents causing the poisoning were also determined. Results: Records of 1036 patients were evaluated. Of them, 764(74%) were female and 272(26%) were male. The predominant age range was 15-24 years in 617(60%) patients. The median time from substance exposure to admission to the emergency department was 2 hours. The most common cause of poisoning was attempted suicide in 955 (92%) patients and drug intoxication was the agent involved in 932 (90%). In the 15-24 year age range, there were 469(76%) female patients. Of the total female population in the study, 716(94%) attempted suicide. The median hospital stay was 24 hours. There were 908(88%) patients who were advised to seek further evaluation at the psychiatry clinic, and 9 (0.9%) patients were admitted to the psychiatry inpatient units after medical treatment. In patients who were hospitalized and followed up, 1 (0.1%) died because of multiple drug poisoning. Conclusion: Most admissions to the emergency department for poisoning related to young women had used drugs during a suicide attempt. (author)

Special number issued in commemoration of 10th anniversary of NEDO's industrial technology research and development department; NEDO sangyo gijutsu kenkyu kaihatsu bumon 10 shunenshi

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

This special number is issued in commemoration of 10th anniversary of NEDO's industrial technology research and development department, to look back its R and D activity results and help the future projects. This department was established in 1988, based on the Law of Establishment of the Industrial Technology Research and Development System, and started its activities as the central institute for positively promoting the R and D of the industrial technologies, centered by the basic and advanced areas, while in closely cooperation with oversea institutes. During this period, the department has been pursuing various projects, including large-scale industrial technology R and D projects transferred from the Agency of Industrial Science and Technology; R and D projects for technologies for the industrial bases of the next generation and medical/welfare equipment technologies; projects for assistance to international cooperative research teams; projects for establishing facilities as research bases necessary for promoting R and D of advanced industrial technologies; and, more recently, projects for establishing measures to cope with global environmental problems. NEDO has been playing a role of managing and controlling various large-size R and D projects, both in name and reality, taking over the projects which had been promoted by the Agency of Industrial Science and Technology. This special number outlines the R and D projects NEDO has pursued in the past 10 years. (NEDO)

Dissemination of Technology to Evaluate Healthy Food Incentive Programs.

Science.gov (United States)

Freedman, Darcy A; Hunt, Alan R; Merritt, Katie; Shon, En-Jung; Pike, Stephanie N

2017-03-01

Federal policy supports increased implementation of monetary incentive interventions for chronic disease prevention among low-income populations. This study describes how a Prevention Research Center, working with a dissemination partner, developed and distributed technology to support nationwide implementation and evaluation of healthy food incentive programming focused on Supplemental Nutrition Assistance Program recipients. FM Tracks, an iOS-based application and website, was developed to standardize evaluation methods for healthy food incentive program implementation at direct-to-consumer markets. This evaluation examined diffusion and adoption of the technology over 9 months (July 2015-March 2016). Data were analyzed in 2016. FM Tracks was disseminated to 273 markets affiliated with 37 regional networks in 18 states and Washington, DC. All markets adopted the sales transaction data collection feature, with nearly all recording at least one Supplemental Nutrition Assistance Program (99.3%) and healthy food incentive (97.1%) transaction. A total of 43,493 sales transactions were recorded. By the ninth month of technology dissemination, markets were entering individual sales transactions using the application (34.5%) and website (29.9%) and aggregated transactions via website (35.6%) at similar rates. Use of optional evaluation features like recording a customer ID with individual transactions increased successively with a low of 22.2% during the first month to a high of 69.2% in the ninth month. Systematic and widely used evaluation technology creates possibilities for pragmatic research embedded within ongoing, real-world implementation of food access interventions. Technology dissemination requires supportive technical assistance and continuous refinement that can be advanced through academic-practitioner partnerships. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

A New Framework for Evaluating the Functional Capabilities of Intra-Enterprise Application Integration Technologies

Directory of Open Access Journals (Sweden)

Hossein Moradi

2010-10-01

Full Text Available Enterprise Application Integration (EAI technologies facilitate the sharing of information and business processes of interrelated information systems in order to achieve the target integrated systems. Different EAI solutions and technologies provide various capabilities which lead to the complexity of their evaluation process. To reduce this complexity, appropriate tools for evaluating the functional capabilities of EAI technologies are required. This paper proposes a new framework for evaluating the functional capabilities of EAI technologies, which simplify the process of evaluating the functional capabilities of intra-enterprise integration technologies and solutions.The proposed framework for evaluating the EAI technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various EAI technologies are categorized in different classes and are evaluated based on their supporting level for functional integration capabilities’ criteria.The new framework offers two lists containing integration technologies and their associated classifications, and functional capabilities of integration technologies. The proposed framework is a novel one which can be used by information system experts for evaluation and comparison purposes of various integration technologies.

Broad Overview of Energy Efficiency and Renewable Energy Opportunities for Department of Defense Installations

Energy Technology Data Exchange (ETDEWEB)

Anderson, E.; Antkowiak, M.; Butt, R.; Davis, J.; Dean, J.; Hillesheim, M.; Hotchkiss, E.; Hunsberger, R.; Kandt, A.; Lund, J.; Massey, K.; Robichaud, R.; Stafford, B.; Visser, C.

2011-08-01

The Strategic Environmental Research and Developmental Program (SERDP)/Environmental Security Technology Certification Program (ESTCP) is the Department of Defense?s (DOD) environmental science and technology program focusing on issues related to environment and energy for the military services. The SERDP/ESTCP Office requested that the National Renewable Energy Laboratory (NREL) provide technical assistance with strategic planning by evaluating the potential for several types of renewable energy technologies at DOD installations. NREL was tasked to provide technical expertise and strategic advice for the feasibility of geothermal resources, waste-to-energy technology, photovoltaics (PV), wind, microgrids, and building system technologies on military installations. This technical report is the deliverable for these tasks.

Decontamination technology assessment

International Nuclear Information System (INIS)

Allen, R.P.; Konzek, G.J.; Schneider, K.J.; Smith, R.I.

1988-01-01

This study was conducted by the Pacific Northwest Laboratory (PNL) for the U.S. Department of Energy (DOE) to identify and technically assess foreign decontamination and decommissioning (D and D) technology developments that may represent significant improvements over D and D technology currently available or under development in the United States. Technology need areas for nuclear power reactor decommissioning operations were identified and prioritized using the results of past light water rector (LWR) decommissioning studies to quantitatively evaluate the potential for reducing cost and decommissioning worker radiation dose for each major decommissioning activity. Based on these identified needs, current foreign D and D technologies of potential interest to the U.S. were identified through personal contacts and the collection and review of an extensive body of D and D literature. These technologies were then assessed qualitatively to evaluate their uniqueness, potential for a significant reduction in D and D costs and/or worker radiation dose, development status, and other factors affecting their value and applicability to U.S. needs

Clinical Simulation: A Protocol for Evaluation of Mobile Technology.

Science.gov (United States)

Mather, Carey; Jensen, Sanne; Cummings, Elizabeth

2017-01-01

For mobile technology to be accepted at point of care in healthcare environments there is a need to demonstrate benefits whilst ameliorating the risks and challenges. To provide a standardised approach to evaluation of mobile technology a simulation protocol was developed to provide guidance for its use in healthcare environments. Simulated conditions provide the opportunity to assess intended and unintended consequences and identify potential workarounds when using technology. The protocol can also be used to demonstrate the importance of the development of digital professionalism by end-users prior to students entering the clinical practice setting. The mobile technology protocol was adapted from a health information systems protocol developed and used at the ITX Lab, Denmark for use in other simulation laboratories. Use case scenarios were developed to enable evaluation of mobile technology for mobile learning of nurses, nurse supervisors, students and patients. The scenarios can be used in a range of simulated environments including hospital bedside, outpatient clinic or community settings. A case study exemplar of a nurse and patient is included to demonstrate how the mobile technology protocol can be applied.

FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation

International Nuclear Information System (INIS)

1994-10-01

The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE's goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD's RDDT and E

Evaluation of radiation protection in some nuclear medicine department

International Nuclear Information System (INIS)

Abdelrahim, Yassir Mohammed

2015-12-01

This study was carryout to evaluate the radiation protection in nuclear medicine department in Sudan, accordance with the standards international recommendation and code of practice for radiation protection in nuclear medicine, the evaluation was done for three nuclear medicine departments, included direct measurement of dose rate and the contamination level in some areas, were radiation sources, radiation workers and public are involved. The data was collected and analyzed from the results for three nuclear medicine departments that the average reading of ambient dose rate in : outside the door of imaging room (SPECT) 0.18μSv/h in hospital (1)& and 0.19μSv/h in hospital(2) and 0.19μSv/h hospital(3), inside control of imaging room (SPECT) 27.8μSv/h in hospital(1)& 0.14μSv/h in hospital(2)& 14μSv/h in hospital(3), inside the injection room 28.81μSv/h in hospital(1), 0.36μSv/h in hpspital(2), 0.06μSv/h in hospital(3) outside the door of lap, 0.65μSv/h in hospital(1), 0.13μSv/h in hospital(2) & 0.12μSv/h in hospital(3), inside the hot lap, 9.68μSv/h in hospital(1) & 0.30μSv/h in hospital(2) & 0.85 μSv/h in hospital(3), in outsidee the door of waiting room of injected patient 1.41μSv/h in hospital(1)& 0.16μSv/h in hospital(2) & 1.08μSv/h in hospital(3). Avaerge reading of contamination in: Floor of hot lap 44.50 B/cm"2 hospital(1) & 4.42B/cm"2in hospital(2) & 6.22 B/cm"2 in hospital (3) . on the bench tap 186.30 B/cm"2 hospital(1), 19.91 B/cm"2 in hospital(2) & 8.77B/cm"2 in hospital(3) floor of injection room 12.60 B/cm"2 in hospital(1) & 11.70 B/cm"2 in hospital(2) & 13.73 B/cm"2 hospital(3) & table of injection room 13.00 B/cm"2 in hospital(1)& 11.70 B/cm"2in hospital(2)& 13.73 B/cm"2 in hospital & tble of injection room 13.00 B/cm"2 in hospital(1) & 20.40 B/cm"2 in hospital(2) & 23.23 B/cm"2 B/cm"2 in hospital(3) on the shield of working surface 144.30 B/cm in hospital(1)& 47.00 B/cm"2 in hospital(2) & 52.33 B/cm"2 in hospital(3) , and makes check

EPA [Environmental Protection Agency] SITE [Superfund Innovative Technology Evaluation] program seeks technology proposals

International Nuclear Information System (INIS)

Anon.

1989-01-01

EPA will issue an RFP to initiate the SITE-005 solicitation for demonstration of technologies under the Superfund Innovative Technology Evaluation (SITE) Program. This portion of the SITE program offers a mechanism for conducting a joint technology demonstration between EPA and the private sector. The goal of the demonstration program is to provide an opportunity for developers to demonstrate the performance of their technologies on actual hazardous wastes at Superfund sites, and to provide accurate and reliable data on that performance. Technologies selected must be of commercial scale and provide solutions to problems encountered at Superfund Sites. Primary emphasis in the RFP is on technologies that address: treatment of mixed, low level radioactive wastes in soils and groundwater; treatment of soils and sludges contaminated with organics and/or inorganics, materials handling as a preliminary step to treatment or further processing, treatment trains designed to handle specific wastes, are in situ technologies, especially those processes providing alternatives to conventional groundwater pump and treat techniques

United States Department of Energy solar receiver technology development

Science.gov (United States)

Klimas, P. C.; Diver, R. B.; Chavez, J. M.

The United States Department of Energy (DOE), through Sandia National Laboratories, has been conducting a Solar Thermal Receiver Technology Development Program, which maintains a balance between analytical modeling, bench and small scale testing, and experimentation conducted at scales representative of commercially-sized equipment. Central receiver activities emphasize molten salt-based systems on large scales and volumetric devices in the modeling and small scale testing. These receivers are expected to be utilized in solar power plants rated between 100 and 200 MW. Distributed receiver research focuses on liquid metal refluxing devices. These are intended to mate parabolic dish concentrators with Stirling cycle engines in the 5 to 25 kW(sub e) power range. The effort in the area of volumetric receivers is less intensive and highly cooperative in nature. A ceramic foam absorber of Sandia design was successfully tested on the 200 kW(sub t) test bed at Plataforma Solar during 1989. Material integrity during the approximately 90-test series was excellent. Significant progress has been made with parabolic dish concentrator-mounted receivers using liquid metals (sodium or a potassium/sodium mixture) as heat transport media. Sandia has successfully solar-tested a pool boiling reflux receiver sized to power a 25 kW Stirling engine. Boiling stability and transient operation were both excellent. This document describes these activities in detail and will outline plans for future development.

Sodium-bearing Waste Treatment Technology Evaluation Report

Energy Technology Data Exchange (ETDEWEB)

Charles M. Barnes; Arlin L. Olson; Dean D. Taylor

2004-05-01

Sodium-bearing waste (SBW) disposition is one of the U.S. Department of Energy (DOE) Idaho Operation Office’s (NE-ID) and State of Idaho’s top priorities at the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL has been working over the past several years to identify a treatment technology that meets NE-ID and regulatory treatment requirements, including consideration of stakeholder input. Many studies, including the High-Level Waste and Facilities Disposition Environmental Impact Statement (EIS), have resulted in the identification of five treatment alternatives that form a short list of perhaps the most appropriate technologies for the DOE to select from. The alternatives are (a) calcination with maximum achievable control technology (MACT) upgrade, (b) steam reforming, (c) cesium ion exchange (CsIX) with immobilization, (d) direct evaporation, and (e) vitrification. Each alternative has undergone some degree of applied technical development and preliminary process design over the past four years. This report presents a summary of the applied technology and process design activities performed through February 2004. The SBW issue and the five alternatives are described in Sections 2 and 3, respectively. Details of preliminary process design activities for three of the alternatives (steam reforming, CsIX, and direct evaporation) are presented in three appendices. A recent feasibility study provides the details for calcination. There have been no recent activities performed with regard to vitrification; that section summarizes and references previous work.

United States Department Of Energy Office Of Environmental Management Technology Development Report Fiscal Year 2010

International Nuclear Information System (INIS)

Bush, S.

2010-01-01

The mission of the Department of Energy's (DOE's) Office of Environmental Management (EM) is to clean up the environmental legacy of nuclear weapons research and production during the Cold War. That mission includes cleaning up nuclear waste, contaminated groundwater and soil, nuclear materials, and contaminated facilities covering two million acres of land in thirty-five states. EM's principal program goals include timely completion of tank waste treatment facilities, reduction of the life-cycle costs and acceleration of the cleanup of the Cold War legacy, and reduction of the EM footprint. The mission of the EM Technology Innovation and Development program is to transform science and innovation into practical solutions to achieve the EM mission. During fiscal year 2010 (October 2009-September 2010), EM focused upon accelerating environmental cleanup by expeditiously filling identified gaps in available knowledge and technology in the EM program areas. This report describes some of the approaches and transformational technologies in tank waste processing, groundwater and soil remediation, nuclear materials disposition, and facility deactivation and decommissioning developed during fiscal year 2010 that will enable EM to meet its most pressing program goals.

UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT TECHNOLOGY DEVELOPMENT REPORT FISCAL YEAR 2010

Energy Technology Data Exchange (ETDEWEB)

Bush, S.

2010-10-22

The mission of the Department of Energy's (DOE's) Office of Environmental Management (EM) is to clean up the environmental legacy of nuclear weapons research and production during the Cold War. That mission includes cleaning up nuclear waste, contaminated groundwater and soil, nuclear materials, and contaminated facilities covering two million acres of land in thirty-five states. EM's principal program goals include timely completion of tank waste treatment facilities, reduction of the life-cycle costs and acceleration of the cleanup of the Cold War legacy, and reduction of the EM footprint. The mission of the EM Technology Innovation and Development program is to transform science and innovation into practical solutions to achieve the EM mission. During fiscal year 2010 (October 2009-September 2010), EM focused upon accelerating environmental cleanup by expeditiously filling identified gaps in available knowledge and technology in the EM program areas. This report describes some of the approaches and transformational technologies in tank waste processing, groundwater and soil remediation, nuclear materials disposition, and facility deactivation and decommissioning developed during fiscal year 2010 that will enable EM to meet its most pressing program goals.

Overview Of Impacts Of Technology Deployment On The Mission Of The Department Of Energy Office Of Environmental Management

International Nuclear Information System (INIS)

McCabe, D.; Chamberlain, G.; Looney, B.; Gladden, J.

2010-01-01

The Environmental Management (EM) mission is to complete the safe cleanup of the environmental legacy brought about from five decades of nuclear weapons development and government-sponsored nuclear energy research. The EM program has embraced a mission completion philosophy based on reducing risk and environmental liability over a 40-50 year lifecycle. The Department has made great progress toward safely disposing of its legacy nuclear waste. EM Research and Development (R and D) program management strategies have driven numerous technology and engineering innovations to reduce risk, minimize cleanup costs, and reduce schedules. Engineering and technology investments have provided the engineering foundation, technical assistance, approaches, and technologies that have contributed to moving the cleanup effort forward. These successes include start-up and operation of several waste treatment facilities and processes at the sites.

13 September 2013 - Chairman of the Board of Directors of the von Karman Institute Kingdom of Belgium J.-P. Contzen visiting the ATLAS experimental cavern with ATLAS Former Spokesperson P. Jenni; visiting the LHC tunnel at Point 1 with Technology Department N. Delruelle and signing the guest book with Technology Department Head F. Bordry. International Relations Adviser T. Kurtyka present.

CERN Multimedia

Laurent Egli (visit)

2013-01-01

13 September 2013 - Chairman of the Board of Directors of the von Karman Institute Kingdom of Belgium J.-P. Contzen visiting the ATLAS experimental cavern with ATLAS Former Spokesperson P. Jenni; visiting the LHC tunnel at Point 1 with Technology Department N. Delruelle and signing the guest book with Technology Department Head F. Bordry. International Relations Adviser T. Kurtyka present.

Early economic evaluation of emerging health technologies: protocol of a systematic review

Science.gov (United States)

2014-01-01

Background The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. Methods/design This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to

Preparing Pre-Service Teachers to Integrate Technology into K-12 Instruction: Evaluation of a Technology-Infused Approach

Science.gov (United States)

Admiraal, Wilfried; van Vugt, Felix; Kranenburg, Frans; Koster, Bob; Smit, Ben; Weijers, Sanne; Lockhorst, Ditte

2017-01-01

The quality of how technology is addressed in teacher education programmes is conditional for how student teachers apply technology in secondary schools after their graduation. Two technology-infused courses of one teacher education programme were evaluated. In line with studies on the development of pre-service teachers' technological,…

DEMONSTRATION OF AQUAFIX AND SAPS PASSIVE MINE WATER TREATMENT TECHNOLOGIES AT SUMMITVILLE MINE SITE, INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

As part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated two passive water treatment (PWT) technologies for metals removal from acid mine drainage (AMD) at the Summitville Mine Superfund Site in southern Colorado...

Sludge technology assessment

International Nuclear Information System (INIS)

Krause, T.R.; Cunnane, J.C.; Helt, J.E.

1994-12-01

The retrieval, processing, and generation of final waste forms from radioactive tank waste sludges present some of the most challenging technical problems confronting scientists and engineers responsible for the waste management programs at the various Department of Energy laboratories and production facilities. Currently, the Department of Energy is developing a strategy to retrieve, process, and generate a final waste form for the sludge that meets the acceptance criteria for the final disposition. An integral part of this strategy will be use of separation processes that treat the sludge; the goal is to meet feed criteria for the various processes that will generate the final waste form, such as vitrification or grouting. This document is intended to (1) identify separation technologies which are being considered for sludge treatment at various DOE sites, (2) define the current state of sludge treatment technology, (3) identify what research and development is required, (4) identify current research programs within either DOE or academia developing sludge treatment technology, and (5) identify commercial separation technologies which may be applicable. Due to the limited scope of this document, technical evaluations regarding the need for a particular separations technology, the current state of development, or the research required for implementation, are not provided

Materials Research Department annual report 1997

Energy Technology Data Exchange (ETDEWEB)

Soerensen, B F; Hansen, N [eds.

1998-04-01

Selected activities of the Materials Research Department at Risoe National Laboratory during 1997 are described. The scientific work is presented in four chapters: Materials Science, Materials Chemistry, Materials Engineering and Materials Technology. A survey is given of the Department`s participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications and other Department activities are included. (au) 278 refs.

The Evaluation of World Literature Courses in Turkish Language Teaching Departments Based on Conceptual Field

Science.gov (United States)

Uysal, Basak

2016-01-01

In this study, World Literature course that are given in Turkish Language Teaching Departments of the universities in Turkey have been evaluated within the scope of "World Literature" that was used by Goethe in the 1820s and developed afterwards. With the purpose of conducting this evaluation, course contents of World Literature of…

Insights on Technology Innovation - A Review of the U.S. Department of Energy Solar Decathlon Competition Entries 2002-2015

Energy Technology Data Exchange (ETDEWEB)

Simon, Joseph J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Doris, Elizabeth S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Farrar, Sara L [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-10-09

The U.S. Department of Energy (DOE) Solar Decathlon is a collegiate competition that challenges student teams to design and build full-size, solar-powered houses. Because of balanced design priorities of architecture, engineering, innovation, performance, and energy use, teams have focused on a range of technologies in the built environment, from wall materials to home control systems, from electric lighting to HVAC equipment, and from geothermal to solar photovoltaic technology. This report provides insights into building technology innovation from a review of the Solar Decathlon competition entry designs, anecdotal experiences, and related market reports. The report describes example case studies of the evolution of technology solutions over time to illustrate the innovative, market-driving nature of the Solar Decathlon. It charts technologies utilized in the team designs over seven competitions and compares those to broader market adoption. It is meant to illustrate the technology innovation aspects of the competition, not to be a comprehensive or quantitative analysis. Solar Decathlon also has impacts on public perception of innovative technologies as well as workforce development through the thousands of participating students. The focus of these case studies is to showcase how it contributes to marketplace adoption of innovative energy technologies.

Materials Department. Annual report 1991

International Nuclear Information System (INIS)

Horsewell, A.; Hansen, N.

1992-03-01

Selected activities of the Materials Department at Risoe National Laboratory during 1991 are described. The work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. (au)

Technology Catalogue

International Nuclear Information System (INIS)

1994-02-01

The Department of Energy's Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM's Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department's clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD's applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina)

Evaluation of technological measures to cope with climate change

Energy Technology Data Exchange (ETDEWEB)

Shimizu, Hiroshi; Moriguchi, Yulchi [National Inst. for Environmental Studies, Onogawa Tsukuba (Japan)

1993-12-31

Because the global warming (climate change) is recognized as a highly probable phenomenon in the next century, the countermeasures to cope with this issue is really Important. International discussion Is progressing towards the conclusion of the treaty to stabilize global warming. Therefore, now is the time to take concrete action to reduce the emission to the greenhouse gases (GHG). To find the way to reduce the emission of the GHG, the procedure as next should be taken. (1) Systematic estimation of GHG emission (GHG analysis), (2) Identification of conventional and Innovative technologies, (3) Assessment of individual sectoral technologies, (4) Comprehensive evaluation of countermeasures as a whole. Both in the U.S.A. and Japan, this kind of research have been made independently. Among these processes, the standard methodologies should be established on the GHG analysis, the assessment of individual technologies and the comprehensive evaluation. From such a background, it is important to discuss the way to evaluate technological measures to cope with climate change between the specialist from the U.S.A. and Japan. And still required to search the possibility to establish a joint project between both countries.

Simulation studies for the evaluation of health information technologies

DEFF Research Database (Denmark)

Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

2012-01-01

It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... system on the appropriateness of prescriptions and drugrelated activities, including laboratory test ordering or medication changes. This article presents the results of a controlled simulation study with 50 simulation runs, including ten doctors and five simulation patients, and discusses experiences...

X-231B technology demonstration for in situ treatment of contaminated soil: Technology evaluation and screening

International Nuclear Information System (INIS)

Siegrist, R.L.; Morris, M.I.; Donaldson, T.L.; Palumbo, A.V.; Herbes, S.E.; Jenkins, R.A.; Morrissey, C.M.; Harris, M.T.

1993-08-01

The Portsmouth Gaseous Diffusion Plant (Ports) is located approximately 70 miles south of Columbus in southern Ohio. Among the several waste management units on the facility, the X-231B unit consists of two adjacent oil biodegradation plots. The plots encompass ∼ 0.8 acres and were reportedly used from 1976 to 1983 for the treatment and disposal of waste oils and degreasing solvents, some containing uranium-235 and technetium-99. The X-231B unit is a regulated solid waste management unit (SWMU) under the Resource Conservation and Recovery Act (RCRA). The X-231B unit is also a designated SWMU located within Quadrant I of the site as defined in an ongoing RCRA Facilities Investigation and Corrective Measures Study (RFI/CMS). Before implementing one or more Technology Demonstration Project must be completed. The principal goal of this project was to elect and successfully demonstrate one ore more technologies for effective treatment of the contaminated soils associated with the X-231B unit at PORTS. The project was divided into two major phases. Phase 1 involved a technology evaluation and screening process. The second phase (i.e., Phase 2) was to involve field demonstration, testing and evaluation of the technology(s) selected during Phase 1. This report presents the methods, results, and conclusions of the technology evaluation and screening portion of the project

Evaluation of a model training program for respiratory-protection preparedness at local health departments.

Science.gov (United States)

Alfano-Sobsey, Edie; Kennedy, Bobby; Beck, Frank; Combs, Brian; Kady, Wendy; Ramsey, Steven; Stockweather, Allison; Service, Will

2006-04-01

Respiratory-protection programs have had limited application in local health departments and have mostly focused on protecting employees against exposure to tuberculosis (TB). The need to provide the public health workforce with effective respiratory protection has, however, been underscored by recent concerns about emerging infectious diseases, bioterrorism attacks, drug-resistant microbes, and environmental exposures to microbial allergens (as in recent hurricane flood waters). Furthermore, OSHA has revoked the TB standard traditionally followed by local health departments, replacing it with a more stringent regulation. The additional OSHA requirements may place increased burdens on health departments with limited resources and time. For these reasons, the North Carolina Office of Public Health Preparedness and Response and industrial hygienists of the Public Health Regional Surveillance Teams have developed a training program to facilitate implementation of respiratory protection programs at local health departments. To date, more than 1,400 North Carolina health department employees have been properly fit-tested for respirator use and have received training in all aspects of respiratory protection. This article gives an overview of the development and evaluation of the program. The training approach presented here can serve as a model that other health departments and organizations can use in implementing similar respiratory-protection programs.

Audit Report "Department of Energy Efforts to Manage Information Technology Resources in an Energy-Efficient and Environmentally Responsible Manner"

Energy Technology Data Exchange (ETDEWEB)

None

2009-05-01

necessary steps to reduce energy consumption and resource usage of their data centers, such as identifying and monitoring the amount of energy used at their facilities. We concluded that Headquarters programs offices (which are part of the Department of Energy's Common Operating Environment) as well as field sites had not developed and/or implemented policies and procedures necessary to ensure that information technology equipment and supporting infrastructure was operated in an energy-efficient manner and in a way that minimized impact on the environment. For example, although required by the Department, sites had not enabled computer equipment power management features designed to reduce energy consumption. In addition, officials within Headquarters programs and at the sites reviewed had not effectively monitored performance or taken steps to fully evaluate available reductions in energy usage at their facilities. Without improvements, the Department will not be able to take advantage of opportunities to reduce energy consumption and realize cost savings of nearly $23 million over the next five years at just the seven sites reviewed. We noted that the potential for reduced energy consumption at these sites alone was equivalent to the annual power requirements of over 2,400 homes or, alternatively, removing about 3,000 cars from the road each year. Many of the available energy reduction strategies, such as fully utilizing energy-efficient settings on the many computers used by the Department and its contractors, are 'low hanging fruit' in that they will provide immediate tangible energy savings at little or no cost. Others, such as a shift to thin-client computing, an environment that transfers the processing capabilities from an individual's desk to a shared server environment, will require some level of investment which can, based on available literature, be successfully recovered through reduced acquisition and support costs. In our judgment, given

SunLine Transit Agency Advanced Technology Fuel Cell Bus Evaluation: Second Results Report and Appendices

Energy Technology Data Exchange (ETDEWEB)

Eudy, L.; Chandler, K.

2011-10-01

This report describes operations at SunLine Transit Agency for their newest prototype fuel cell bus and five compressed natural gas (CNG) buses. In May 2010, SunLine began operating its sixth-generation hydrogen fueled bus, an Advanced Technology (AT) fuel cell bus that incorporates the latest design improvements to reduce weight and increase reliability and performance. The agency is collaborating with the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to evaluate the bus in revenue service. This is the second results report for the AT fuel cell bus since it was placed in service, and it focuses on the newest data analysis and lessons learned since the previous report. The appendices, referenced in the main report, provide the full background for the evaluation. They will be updated as new information is collected but will contain the original background material from the first report.

Multiple performance measures are needed to evaluate triage systems in the emergency department.

Science.gov (United States)

Zachariasse, Joany M; Nieboer, Daan; Oostenbrink, Rianne; Moll, Henriëtte A; Steyerberg, Ewout W

2018-02-01

Emergency department triage systems can be considered prediction rules with an ordinal outcome, where different directions of misclassification have different clinical consequences. We evaluated strategies to compare the performance of triage systems and aimed to propose a set of performance measures that should be used in future studies. We identified performance measures based on literature review and expert knowledge. Their properties are illustrated in a case study evaluating two triage modifications in a cohort of 14,485 pediatric emergency department visits. Strengths and weaknesses of the performance measures were systematically appraised. Commonly reported performance measures are measures of statistical association (34/60 studies) and diagnostic accuracy (17/60 studies). The case study illustrates that none of the performance measures fulfills all criteria for triage evaluation. Decision curves are the performance measures with the most attractive features but require dichotomization. In addition, paired diagnostic accuracy measures can be recommended for dichotomized analysis, and the triage-weighted kappa and Nagelkerke's R 2 for ordinal analyses. Other performance measures provide limited additional information. When comparing modifications of triage systems, decision curves and diagnostic accuracy measures should be used in a dichotomized analysis, and the triage-weighted kappa and Nagelkerke's R 2 in an ordinal approach. Copyright © 2017 Elsevier Inc. All rights reserved.

Materials Department. Annual report 1990

International Nuclear Information System (INIS)

Horsewell, A.; Hansen, N.

1991-07-01

Selected activities of the Materials Department at Risoe National Laboratory during 1990 are described. The work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. (author) 91 refs., 46 ills

Application research for 4D technology in flood forecasting and evaluation

Science.gov (United States)

Li, Ziwei; Liu, Yutong; Cao, Hongjie

1998-08-01

In order to monitor the region which disaster flood happened frequently in China, satisfy the great need of province governments for high accuracy monitoring and evaluated data for disaster and improve the efficiency for repelling disaster, under the Ninth Five-year National Key Technologies Programme, the method was researched for flood forecasting and evaluation using satellite and aerial remoted sensed image and land monitor data. The effective and practicable flood forecasting and evaluation system was established and DongTing Lake was selected as the test site. Modern Digital photogrammetry, remote sensing and GIS technology was used in this system, the disastrous flood could be forecasted and loss can be evaluated base on '4D' (DEM -- Digital Elevation Model, DOQ -- Digital OrthophotoQuads, DRG -- Digital Raster Graph, DTI -- Digital Thematic Information) disaster background database. The technology of gathering and establishing method for '4D' disaster environment background database, application technology for flood forecasting and evaluation based on '4D' background data and experimental results for DongTing Lake test site were introduced in detail in this paper.

Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

Department of Energy 1977--1994: A summary history

Energy Technology Data Exchange (ETDEWEB)

Fehner, T.R.; Holl, J.M.

1994-11-01

The Department of Energy Organization Act of 1977 created perhaps the most interesting and diverse agency in the Federal Government. The new department brought together for the first time not only most of the government`s energy programs but also defense responsibilities that included the design, construction, and testing of nuclear weapons. The Department of Energy incorporated a score of organizational entities from a dozen departments and agencies, each with its own history and traditions. Uniting these seemingly disparate entities and programs was a common commitment to performing first rate science and technology. The Department of Energy sought--and continues to seek--to be one of the Nation`s premier science and technology organizations. The Department of Energy, 1977--1994, is a summary history of the origins, goals, and achievements of the Department and selected major programs. Beginning with the various fuels policies on the energy side and the Manhattan project on the defense side, the study details how the Department was born of the energy crisis of the early and mid-1970s. The history then surveys the Department and its programs from the Carter through the Clinton administrations. As the energy crisis eased, the Department played a central role on issues as dissimilar as the Strategic Defense Initiative and the Superconducting Super Collider. With the end of the Cold War, the Department of Energy further transformed itself, moving from the building of bombs to partial dismantlement of the nuclear weapons complex and to an increased emphasis on environmental activities and technology transfer efforts.

The development of coal-based technologies for Department of Defense facilities. Technical progress report, September 1995 - March 1996

Energy Technology Data Exchange (ETDEWEB)

Miller, B.G.; Pisupati, S.V.; Scaroni, A.W. [and others

1996-10-01

The U.S. Department of Defense (DOD), through an Interagency Agreement with the U.S. Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE. Activities this reporting period are summarized by phase. During this reporting period, the Phase I final report was completed. Work in Phase II focused on emissions reductions, coal beneficiation/preparation studies, and economic analyses of coal use. Emissions reductions investigations included completing a study to identify appropriate SO{sub 2} and NO{sub x} control technologies for coal-fired industrial boilers. In addition, work continued on the design of a ceramic filtering device for installation on the demonstration boiler. The ceramic filtering device will be used to demonstrate a smaller and more efficient filtering device for retrofit applications. Work related to coal preparation and utilization, and the economic analysis was primarily focused on preparing the final report. Work in Phase III focused on coal preparation studies and economic analyses of coal use. Coal preparation studies were focused on continuing activities on particle size control, physical separations, surface-based separation processes, and dry processing. The economic study focused on community sensitivity to coal usage, regional economic impacts of new coal utilization technologies, and constructing a national energy portfolio.

Materials Research Department annual report 1996

International Nuclear Information System (INIS)

Soerensen, B.F.; Hansen, N.

1997-04-01

Selected activities of the Materials Research Department at Risoe National Laboratory during 1996 are described. The scientific work is presented in four chapters: Materials Science, Materials Chemistry, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications and other Department activities are included. (au)

Materials Research Department annual report 1997

International Nuclear Information System (INIS)

Soerensen, B.F.; Hansen, N.

1998-04-01

Selected activities of the Materials Research Department at Risoe National Laboratory during 1997 are described. The scientific work is presented in four chapters: Materials Science, Materials Chemistry, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications and other Department activities are included. (au)

Evaluation technology of human behavior cognition; Ningen kodo ninchi hyoka gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For human engineering and improvement of the living environment, the evaluation technology of human behavior cognition was studied. For the future reformation and creation of economic structure, the following are required: establishment of safe and affluent communities, further improvement of the safety and harmonious balance of people, lives and society, and R & D close to people and social needs. Introduction of Product Liability law and a fail-safe concept are examples of such efforts. However, since many accidents are found in the human society, the relation between human errors and human characteristics should be studied in detail. The cognitive science of human behavior is an objective evaluation technology from the viewpoint of human being, object, environment and society. Based on these social and technological background, the feasibility of the evaluation technology is studied, and the future trend and skeleton of this project are clarified. The domestic and foreign trends of technologies concerned are thus surveyed, and the important points, features, skeleton and ripple effect of the technology are summarized. 500 refs., 70 figs., 5 tabs.

1978 annual report of the safety department

International Nuclear Information System (INIS)

Kiefer, H.; Koelzer, W.

1979-04-01

The Safety Officer and the Security Officer, respectively, are responsible for radiation protection and technical safety, both conventional and nuclear, for the physical protection as well as the security of nuclear materials and radioactive substances within the Kernforschungszentrum Karlsruhe GmbH. (KfK). To fulfill these functions they rely on the assitance of the Safety Department. The duties of this Department cover tasks relative to radiation protection, safety and security on behalf of the institutes and departments of KfK and environmental monitoring for the whole Karlsruhe Nuclear Research Center as well as research and development work, mainly performed under the Nuclear Safety Project and the Nuclear Safeguards Project. The centers of interest of r and d activities are: investigation of the atmospheric diffusion of nuclear pollutants on the micro- and meso-scales, evaluation of the radiological consequences of accidents in reactors under probabilistic aspects, studies of the physical and chemical behavior of radionuclides with particularly high biological effectiveness in the environment, implementation of nuclear fuel safequarding systems, improvements in radiation protection measurement technology. This report gives details of the different duties, indicates the results of 1978 routine tasks, and reports about new results of investigations and developments of the working groups of the Department. (orig.) [de

Annual Report 1979 of the Safety Department

International Nuclear Information System (INIS)

Kiefer, H.; Koelzer, W.; Koenig, L.A.

1980-04-01

The Safety Officer and the Security Officer, respectively, are responsible for radiation protection and technical safety, both conventional and nuclear, for the physical protection as well as the security of nuclear materials and radioactive substances within the Kernforschungszentrum Karlsruhe GmbH. (KfK). To fulfill these functions they rely on the assistance of the Safety Department. The duties of this Department cover tasks relative to radiation protection, safety and security on behalf of the institutes and departments of KfK and environmental monitoring for the whole Karlsruhe Nuclear Research Center as well as research and development work, mainly performed under the Nuclear Safety Project and the Nuclear Safeguards Project. The centers of interest of r and d activities are: investigation of the atmospheric diffusion of nuclear pollutants on the micro- and meso-scales, evaluation of the radiological consequences of accidents in reactors under probabilistic aspects, studies of the physical and chemical behavior of radionuclides with particularly high biological effectiveness in the environment, implemantation of nuclear fuel safeguarding systems, improvements in radiation protection measurement technology. This report gives details of the different duties, indicates the results of 1979 routine tasks, and reports about results of investigations and developments of the working groups of the Department. (orig.) [de

NDA technology for uranium resource evaluation. Progress report, January 1-June 30, 1980

International Nuclear Information System (INIS)

Evans, M.L.

1981-08-01

This report describes work performed during the time period from January 1, 1980, to June 30, 1980, on the contract for Nondestructive Nuclear Analysis Technology for Uranium Resource Evaluation in the Safeguards Technology, International Safeguards, and Training Group, Q-1, at Los Alamos National Laboratory. The calculational effort was concentrated on the development of a generalized computer model to simulate the emission, transport, and detection of natural gamma radiation from various logging environments. The model yields accurate high-resolution gamma-ray pulse-height spectra that can be used to correct both gross gamma-ray and spectral gamma-ray logs. The experimental effort focused on the analytical chemistry assay of a series of crushed concrete samples ten from the Department of Energy (DOE) Grand Junction calibration models used to calibrate logging tools employing active neutron interrogation techniques. The results establish the levels of neutron poisons in the test pits. In addition, the outfitting of a Bendix Field Engineering Corporation/DOE logging truck for the field testing of the photoneutron probe is described, as is a sodium iodide passive gamma-ray probe used to verify the absence of obstructions in a borehole and to locate uranium-bearing ore zones

Trauma in elderly patients evaluated in a hospital emergency department in Konya, Turkey: a retrospective study

Directory of Open Access Journals (Sweden)

Kara H

2013-12-01

Full Text Available Hasan Kara,1 Aysegul Bayir,1 Ahmet Ak,1 Murat Akinci,1 Necmettin Tufekci,1 Selim Degirmenci,1 Melih Azap21Department of Emergency Medicine, Selçuk University, Konya, Turkey; 2Department of Emergency Medicine, Konya Numune Hospital, Konya, TurkeyPurpose: Trauma is a common cause of admission to the hospital emergency department. The purpose of this study was to evaluate the cause of admission, clinical characteristics, and outcomes of patients aged ≥65 years admitted to an emergency department in Turkey because of blunt trauma.Materials and methods: Medical records were retrospectively reviewed for 568 patients (314 women and 254 men aged ≥65 years who were admitted to an emergency department of a tertiary care hospital.Results: Trauma was caused by low-energy fall in 379 patients (67%, traffic accident in 79 patients (14%, high-energy fall in 69 patients (12%, and other causes in 41 patients (7%. The most frequent sites of injury were the lower extremity, thorax, upper extremity, and head. The femur was the most frequent fracture site. After evaluation in the emergency department, 377 patients (66% were hospitalized. There were 31 patients (5% who died. Risk of hospitalization after trauma was significantly associated with trauma to the lower extremity, thorax, and spine; fractures of the femur and rib; and intracranial injury.Conclusion: Emergency department admission after trauma in patients aged $65 years is common after low-energy falls, and most injuries occur to the extremities. It is important to focus on prevention of falls to decrease the frequency of trauma in the elderly.Keywords: fall, femur, fracture, injury

An overview of the U.S. Department of Energy's program for liquid metal reactor seismic technology

International Nuclear Information System (INIS)

Jetter, R.I.; Seidensticker, R.W.

1988-01-01

During the past decade, the U.S. Department of Energy (DOE) has sponsored the development of seismic design technology in support of Liquid Metal Reactors (LMR's). This has been accomplished through 1) major projects such as the Fast Flux Test Facility (FFTF) and the Clinch River Breeder Reactor (CRBR), 2) base technology programs and 3) support to the design development of innovative LMR's, SAFR and PRISM. These developments have come in the areas of ground motion definition, soil-structure interaction, seismic isolation, fluid-structure interaction and structural analysis methods and criteria for equipment and components such as piping, reactor core and vessels. The initial developments in seismic design technology by DOE and others were directed toward ensuring that the plant, equipment and components had sufficient seismic resistance to ensure availability after an Operations Basis Earthquake (OBE) and to survive a Safe Shutdown Earthquake (SSE). During this period, the emphasis on conservative design had significant cost impacts. The current focus is directed toward a better understanding of seismic design margins and the development of methods to reduce seismic loads on plant and equipment and to enhance siting flexibility. From this perspective, the DOE is currently reassessing the needs and priorities for future seismic technology development. Coordination with University research programs and ongoing seismic technology development sponsored by other governmental agencies and institutions is an integral part of this planning process. The purpose of this paper is to highlight the current status of DOE's seismic technology program for LMR's and to provide an overview of future areas of interest. (author). 7 refs

Methodology Of PACS Effectiveness Evaluation As Part Of A Technology Assessment. The Dutch PACS Project Extrapolated.

Science.gov (United States)

Andriessen, J. H. T. H.; van der Horst-Bruinsma, I. E.; ter Haar Romeny, B. M.

1989-05-01

The present phase of the clinical evaluation within the Dutch PACS project mainly focuses on the development and evaluation of a PACSystem for a few departments in the Utrecht University hospital (UUH). A report on the first clinical experiences and a detailed cost/savings analysis of the PACSystem in the UUH are presented elsewhere. However, an assessment of the wider fmancial and organizational implications for hospitals and for the health sector is also needed. To this end a model for (financial) cost assessment of PACSystems is being developed by BAZIS. Learning from the actual pilot implementation in UUH we realized that general Technology Assessment (TA) also calls for an extra-polation of the medical and organizational effects. After a short excursion into the various approaches towards TA, this paper discusses the (inter) organizational dimensions relevant to the development of the necessary exttapolationmodels.

Technical and economic evaluation of selected technologies of the Landfill Characterization System

Energy Technology Data Exchange (ETDEWEB)

Floran, R.J.

1993-12-31

In 1992 and 1993, numerous innovative and emerging technologies for characterizing metal and mixed waste contaminants and their migration beneath landfills in and environments were field tested at Sandia`s Chemical Waste Landfill. Many of these technologies are being evaluated as part of the Landfill Characterization System (LCS). The LCS emphasizes minimally intrusive technologies and downhole sensors that strive to be cheaper, better, safer and faster than conventional methods. Major aims of the LCS are to demonstrate, test and evaluate these technologies, and determine whether substantial cost saving over traditional baseline methods can be realized. To achieve these goals, the LCS uses an integrated systems approach that stresses the application of complementary and compatible technologies. Successful field demonstrations combined with favorable economics, will greatly assist the commercialization of these technologies to the private sector and to Environmental Restoration groups throughout the DOE Complex. In this paper, a technical and economic evaluation of selected technologies that comprise the LCS is presented. Because sampling and analysis is the most costly part of a characterization effort, the economic evaluation presented here focuses specifically on these activities. LCS technologies discussed include the ``Smart Sampling Methodology`` and two field screening analytical methods, stripping voltammetry and x-ray fluorescence.

Patient exposure evaluation in Romanian radiological departments

International Nuclear Information System (INIS)

Girjoaba, O.; Cucu, A.

2012-01-01

Purpose: A nation-wide evaluation of ionizing radiation exposure of the Romanian population due to the radiological examinations is performed in accordance with European Directive 97/43 EURATOM implemented in national regulations. Method: The study is applied to the collected data from radiological departments from Romanian hospitals during 2010. The radiological examinations were grouped in three categories: conventional diagnostic radiology, interventional radiology and computed tomography. The annual collective dose was determined from the reported data about the mean effective doses and the frequency for each type of radiological examination, in conformity with the national regulations. Regarding the frequency aspects, the results include the age and gender distributions. Major results: More then 6 million radiological examinations were performed in 2010, Romania having a population about of 20.3 million inhabitants. The collective effective dose for 2010 resulted from the study is 152 mSv per 1000 inhabitants. Conclusions: Medical practitioners must select the best medical imaging investigation for each clinical case taking into account the importance of keeping the patient dose as low as possible. Medical physicists should be strongly involved in the establishing of the dosimetry procedures. (author)

Guidelines for preparing criticality safety evaluations at Department of Energy non-reactor nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

This Department of Energy (DOE) is approved for use by all components of DOE. It contains guidelines that should be followed when preparing Criticality Safety Evaluations that will be used to demonstrate the safety of operations performed at DOE Non-Reactor Nuclear Facilities. Adherence with these guidelines will provide consistency and uniformity in Criticality Safety Evaluations (CSEs) across the complex and will document compliance with DOE Order 5480.24 requirements as they pertain to CSEs.

Guidelines for preparing criticality safety evaluations at Department of Energy non-reactor nuclear facilities

International Nuclear Information System (INIS)

1998-09-01

This Department of Energy (DOE) is approved for use by all components of DOE. It contains guidelines that should be followed when preparing Criticality Safety Evaluations that will be used to demonstrate the safety of operations performed at DOE Non-Reactor Nuclear Facilities. Adherence with these guidelines will provide consistency and uniformity in Criticality Safety Evaluations (CSEs) across the complex and will document compliance with DOE Order 5480.24 requirements as they pertain to CSEs

A National Research Council Evaluation of the Department of Energy's Marine and Hydrokinetic Resource Assessments

Science.gov (United States)

Glickson, D.; Holmes, K. J.; Cooke, D.

2012-12-01

Marine and hydrokinetic (MHK) resources are increasingly becoming part of energy regulatory, planning, and marketing activities in the U.S. and elsewhere. In particular, state-based renewable portfolio standards and federal production and investment tax credits have led to an increased interest in the possible deployment of MHK technologies. The Energy Policy Act of 2005 (Public Law 109-58) directed the Department of Energy (DOE) to estimate the size of the MHK resource base. In order to help DOE prioritize its overall portfolio of future research, increase the understanding of the potential for MHK resource development, and direct MHK device and/or project developers to locations of greatest promise, the DOE Wind and Water Power Program requested that the National Research Council (NRC) provide an evaluation of the detailed assessments being conducted by five individual resource assessment groups. These resource assessment groups were contracted to estimate the amount of extractable energy from wave, tidal, ocean current, ocean thermal energy conversion, and riverine resources. Performing these assessments requires that each resource assessment group estimate the average power density of the resource base, as well as the basic technology characteristics and spatial and temporal constituents that convert power into electricity for that resource. The NRC committee evaluated the methodologies, technologies, and assumptions associated with each of these resource assessments. The committee developed a conceptual framework for delineating the processes used to develop the assessment results requested by the DOE, with definitions of the theoretical, technical, and practical resource to clarify elements of the overall resource assessment process. This allowed the NRC committee to make a comparison of different methods, terminology, and processes among the five resource assessment groups. The committee concluded that the overall approach taken by the wave resource and

Does Your Department Have a Technology Innovation Strategy?

Science.gov (United States)

Felkey, Bill G; Fox, Brent I

2016-11-01

There are ways to facilitate the successful implementation of technological innovations. These are especially important in a time of rapid development of new tools to support safe and effective medication therapy. This installment addresses some of the key components of a successful technology innovation strategy.

An Orchestrating Evaluation of Complex Educational Technologies: a Case Study of a CSCL System

Directory of Open Access Journals (Sweden)

Luis P. Prieto

2014-06-01

Full Text Available As digital technologies permeate every aspect of our lives, the complexity of the educational settings, and of the technological support we use within them, unceasingly rises. This increased complexity, along with the need for educational practitioners to apply such technologies within multi-constraint authentic settings, has given rise to the notion of technology-enhanced learning practice as “orchestration of learning”. However, at the same time, the complexity involved in evaluating the benefits of such educational technologies has also increased, prompting questions about the way evaluators can cope with the different places, technologies, informants and issues involved in their evaluation activity. By proposing the notion of “orchestrating evaluation”, this paper tries to reconcile the often disparate “front office accounts” of research publications and the “shop floor practice” of evaluation of educational technology, through the case study of evaluating a system to help teachers in coordinating computer-supported collaborative learning (CSCL scenarios. We reuse an internationally-evaluated conceptual framework of “orchestration aspects” (design, management, adaptation, pragmatism, etc. to structure the case‟s narrative, showing how the original evaluation questions and methods were modulated in the face of the multiple (authentic evaluation setting constraints.

Department of Material Studies - Overview

International Nuclear Information System (INIS)

Werner, Z.

2007-01-01

The technology of modifying surfaces of practical-use materials by means of continuous and pulsed energy and particle beams has been intensely studied for more than 20 years. In some fields it is presently utilized on a wide scale in industry. Continuous or pulsed ion and plasma beams play a significant role among various approaches used in this area. The research carried by Department P-IX is centered around the use of two own ion implantation machines (ion implanters) of different kind and several world-wide unique sources of high-intensity intense plasma pulses, utilized jointly with Department P-V. The Department cooperates closely with Forschungszentrum Rossendorf (FZR, Dresden, Germany) in the field of ion-beam-based analytical techniques and the use of unique ion implantation facilities. The main objectives of the Department are: search for new ways of modifying surface properties of solid materials by means of continuous or pulsed ion and plasma beams and implementation of ion implantation technique in national industries as a method of improving the lifetime of machine parts and tools utilized in industry. In 2006 these objectives were accomplished in many ways, particularly by research on: formation of superconducting MgB 2 phases, electrical conductivity in metallic nano-layers produced in oxide insulators (Al 2 O 3 ) by ion implantation, ion implantation as a method of improving mechanical properties of stainless steels without degrading their corrosion resistance, ion implantation/plasma treatment of ceramics aimed at improving their wettability in ceramic-metal joints, methods of controlling wear of ceramic-polymer pairs used in bio-medical applications. The research was conducted in cooperation with Department P-V of IPJ, Institute of Nuclear Chemistry and Technology (Warsaw), Warsaw University of Technology, Institute of Technology of Materials for Electronics (Warsaw), and Institute of Molecular Physics Polish Academy of Sciences (Poznan

Materials Research Department annual report 1999

DEFF Research Database (Denmark)

Sørensen, Bent F.; Hansen, Niels

2000-01-01

with national and international industries and research institutions and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditures of theDepartment are given. Lists of staff members, visiting scientists, publications and other Department activities......Selected activities of the Materials Research Department at Risø National Laboratory during 1999 are described. The scientific work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given ofthe Department's participation in collaboration...

Resistance to Classroom Observation in the Context of Teacher Evaluation: Teachers' and Department Heads' Experiences and Perspectives

Science.gov (United States)

de Lima, Jorge Ávila; Silva, Maria João Tavares

2018-01-01

This paper reports the main findings of a study that sought to understand how teachers and department heads perceived and experienced the implementation of a classroom observation system in a teacher evaluation context. The data was collected through a teacher and department head survey and interviews with department heads who were responsible for…

METHODS FOR EVALUATION OF COMPANIES’ INFORMATION SYSTEMS AND TECHNOLOGIES EFFICIENCY AND CONTROL IN TEACHING COURSE "INFORMATION TECHNOLOGY GOVERNANCE"

Directory of Open Access Journals (Sweden)

Samchynska Yaroslava

2014-10-01

Full Text Available The use of the information systems and technologies in economic activity is called to represent companies’ corporate principles, aims, traditions, to help in realization of the planned strategies, thanks to that the management efficiency and the cost of enterprise increases. Teaching for educational discipline «IT Governance» is directed on a study and research of these intercommunications by students of the 5th course on specialties «Computer Science», «Software Engineering» for educational level Specialist (Past Bachelor Degree, Master degree. The auditing services belong to the actual methods for evaluation of the information systems and technologies efficiency and control, which are studied according to the course «IT Governance». The article deals with the methodological basis of providing auditing services for evaluation of efficiency and control of information systems (technologies for the purpose of satisfaction of growing informational needs of companies and functional activation in their information resources. The main task of auditing services for control of information systems (information communication technologies efficiency is to evaluate independently and objectively if the information technologies provide the necessary services. The basic criteria, data ware, subject and object of audit necessary for drawing up an audit report and assurance declaring are established. The program and a detailed list of auditing procedures for evaluation of efficiency of information systems and technologies have been presented

Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

Science.gov (United States)

Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

2016-01-01

The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

Study on the evaluation of decontamination and decommissioning technologies and their demands in Korea

Energy Technology Data Exchange (ETDEWEB)

Oh, Won Zin; Lee, K. W.; Jung, C. H.; Choi, W. K.; Won, H. J.; Kim, G. N.; Jung, K. J.; Chung, U. S.; Lee, D. G.; Kim, C. J.; Kim, S. H.; Chung, J. M.; Kwon, S. O. [Korea Atomic Energy Research Institute, Taejeon (Korea)

2001-03-01

D and D market demand, the current status of the technology, technology items applicable to the domestic market and the future prospect of technologies not self-developed in Korea were evaluated. In the evaluation of D and D market demand and the current status of the technology, 1) the market demand was investigated on the D and D objects such as the research reactors, the nuclear power plants and the nuclear fuel cycle development facilities from 2001 to 2010, and 2) the technology demand for decommissioning of the nuclear power plants from 2001 to 2030 were investigated. In the evaluation of the technology items applicable to the domestic market, 1) the analysis of the technologies derived from the technology requirements on D and D objects and their related similar technologies was performed, and 2) the technology items applicable to the domestic market were derived from the evaluation of the suitability on the domestic technology requirements. The promising technologies applicable to the domestic market were derived from the integrated evaluation of the technological factors(innovation, internationally competitive power and the difficulty of the technology development), economical factors (domestic demand and substitution effect of foreign currency) and domestically applicable factors (applicability on the industry and a ripple effect). The background of the technology development such as business applicability and the technology demonstration effect through the integrated management of the decommissioning of TRIGA reactor and the uranium conversion facility was also analyzed. 10 refs., 9 figs., 28 tabs. (Author)

Evaluation of filtration and distillation methods for recycling automotive coolant

International Nuclear Information System (INIS)

Randall, P.M.; Gavaskar, A.R.

1992-01-01

Government regulations and high waste disposal cost of spent automotive coolant have driven the vehicle maintenance industry to explore on-site recycling. The USEPA in cooperation with the New Jersey Department of Environmental Protection (NJDEP) and the New Jersey Department of Transportation (NJDOT) evaluated two commercially available technologies that have potential for reducing the volume of spent automotive coolant. The objective of this study was to evaluate the quality of the recycled coolant, the pollution prevention potential, and the economic feasibility of the technologies

Post Advanced Technology Implementation Effects on School Psychologist Job Performance

Science.gov (United States)

Hobson, Rana Dirice

2017-01-01

The technology acceptance model (TAM) has been widely used to assess technology adoption in business, education, and health care. The New York City Department of Education (NYCDOE) launched a web-based Individualized Educational Program (IEP) system for school psychologists to use in conducting evaluations and reviews. This quantitative study…

FY 1994 program summary: Office of Technology Development, Office of Research and Development, Office of Demonstration, Testing, and Evaluation

Energy Technology Data Exchange (ETDEWEB)

1994-10-01

The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE`s goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD`s RDDT and E.

Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

International Nuclear Information System (INIS)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

2004-02-01

The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

2004-02-15

The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

Air contamination measurements for the evaluation of internal dose to workers in nuclear medicine departments

Science.gov (United States)

De Massimi, B.; Bianchini, D.; Sarnelli, A.; D'Errico, V.; Marcocci, F.; Mezzenga, E.; Mostacci, D.

2017-11-01

Radionuclides handled in nuclear medicine departments are often characterized by high volatility and short half-life. It is generally difficult to monitor directly the intake of these short-lived radionuclides in hospital staff: this makes measuring air contamination of utmost interest. The aim of the present work is to provide a method for the evaluation of internal doses to workers in nuclear medicine, by means of an air activity sampling detector, to ensure that the limits prescribed by the relevant legislation are respected. A continuous air sampling system measures isotope concentration with a Nal(TI) detector. Energy efficiency of the system was assessed with GEANT4 and with known activities of 18F. Air is sampled in a number of areas of the nuclear medicine department of the IRST-IRCCS hospital (Meldola- Italy). To evaluate committed doses to hospital staff involved (doctors, technicians, nurses) different exposure situations (rooms, times, radionuclides etc) were considered. After estimating the intake, the committed effective dose has been evaluated, for the different radionuclides, using the dose coefficients mandated by the Italian legislation. Error propagation for the estimated intake and personal dose has been evaluated, starting from measurement statistics.

Analysis and evaluation of Food and Beverage Department of a hotel

OpenAIRE

Sychrová, Veronika

2011-01-01

Analysis of the department and evaluation of present condition was elaborated at the request of the hotel manager. From the analysis comes the main aim - proposition of a new marketing concept. The structure of the thesis is divided into theoretical part concerning accommodation and gastronomic service and marketing. Practical part is then focused on the characteristic of the hotel in general, where the main emphasis is on competitor hotels and restaurants analysis. Following chapter addresse...

28 May 2010 - Japanese Ambassador H. Ueda visiting the LHC superconducting magnet test hall with CERN Technology Deputy Department Head L. Rossi.

CERN Multimedia

Maximilien Brice

2010-01-01

CERN-HI-1005088 02 Japanese Ambassador H. Ueda (right) visiting the LHC superconducting magnet test hall with Technology Deputy Department Head L. Rossi(left). H. Ueda is accompanied by KEK and ATLAS Collaboration T. Kondo (centre).

Development of life evaluation technology for nuclear power plant components

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Jin; Kim, Yun Jae; Choi, Jae Boong [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

2002-03-15

This project focuses on developing reliable life evaluation technology for nuclear power plant components, and is divided into two parts, development of a life evaluation system for nuclear pressure vessels and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered in this project: defect assessment method for steam generator tubes, development of fatigue monitoring system, assessment of corroded pipes, domestic round robin analysis for constructing P-T limit curve for RPV, development of probabilistic integrity assessment technique, effect of aging on strength of dissimilar welds, applicability of LBB to cast stainless steel, and development of probabilistic piping fracture mechanics.

Managing medical equipment used by technology-dependent children: evaluation of an instructional tool for pediatric residents and medical students.

Science.gov (United States)

Jackson, Jennifer M; Radulovic, Andrea; Nageswaran, Savithri

2012-08-01

To evaluate the effectiveness of a workshop on managing medical devices used in technology-dependent children. Study participants included residents and medical students rotating in the pediatrics department at the time of the study. A workshop was conducted consisting of learning stations for common medical devices, including brief presentations and opportunities for hands-on practice with each device. Participants completed surveys before and after the workshop assessing their perceived ability to manage medical equipment before and after the workshop and their ongoing learning needs. All participants indicated a substantial need for training on how to manage medical devices used by technology-dependent patients. Scores for perceived ability to manage the devices improved significantly after workshop participation for nearly all devices taught. Medical trainees have significant learning needs for managing devices used by technology-dependent patients. Hands-on, small-group training can be an effective instructional tool for improving confidence in these skills.

Plant Research Department annual report 2003

DEFF Research Database (Denmark)

Kossmann, J.; Jakobsen, Iver; Nielsen, K.K.

2004-01-01

In 2003 the Plant Research Department (PRD) at Risø National Laboratory was involved in establishing the consortium Plant Biotech Denmark, which is unifying most of the Danish Plant Biotechnology activities. Within the consortium, PRD has the uniqueopportunity to be the only life science department...... to genes, which are widely applicable in the life sciences, such as non-invasive and non-destructive technologies to determine metabolite concentrationswith high spatial and temporal resolution. The Plant Research Department applies these and state-of-the-art technologies to increase knowledge to develop...... located in an environment that is largely dominated by physicists. PRD is challenged to optimally interface Plant Biology with the different fields of expertise that are established at Risø NationalLaboratory. These activities are mainly related to develop novel post-genomic tools to assign function...

Optics and Plasma Research Department annual progress report for 2004

OpenAIRE

Bindslev, Henrik; Lynov, Jens-Peter; Pedersen, C.; Petersen, Paul Michael; Skaarup, Bitten

2005-01-01

The Optics and Plasma Research Department performs basic and applied research within three scientific programmes: (1) laser systems and optical materials, (2) optical diagnostics and information processing and (3) plasma physics and technology. Thedepartment has core competencies in optical sensors, optical materials, biophotonics, fusion plasma physics, and industrial plasma technology. The department employs key technologies in micro- and nanotechnology for optical systems, temperaturecalib...

Materials Research Department annual report 1999

Energy Technology Data Exchange (ETDEWEB)

Soerensen, B.F.; Hansen, N. [eds.

2000-04-01

Selected activities of the Materials Research Department at Risoe National Laboratory during 1999 are described. The scientific work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in collaboration with national and international industries and research institutions and of its actitivities within education and training. Furthermore, the main figures outlining the funding and expenditures of the Department are given. Lists of staff members, visiting scientists, publications and other Department activities are included. (au)

Materials Research Department annual report 1999

International Nuclear Information System (INIS)

Soerensen, B.F.; Hansen, N.

2000-04-01

Selected activities of the Materials Research Department at Risoe National Laboratory during 1999 are described. The scientific work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in collaboration with national and international industries and research institutions and of its actitivities within education and training. Furthermore, the main figures outlining the funding and expenditures of the Department are given. Lists of staff members, visiting scientists, publications and other Department activities are included. (au)

Intervention of drudgery reducing technologies in agriculture and impact evaluation.

Science.gov (United States)

Mehta, Manju; Gandhi, Sudesh; Dilbaghi, Mamta

2012-01-01

Agriculture is main source of livelihood for majority of the population in India. Agriculture has been established as one of the drudgery prone occupation of unorganized sector due to lack of access to improved agricultural technologies. The present study was planned to assess intervention of drudgery reducing technologies in agriculture and its impact evaluation. The drudgery areas/activities in agriculture were identified. Participatory field level skill training for proper use of the ergonomically improved farm technologies were given to men and women in separate groups. An intervention package consisting of improved sickle, wheel hand hoe, capron, cot bag and protective gloves was introduced in village Shahpur. Data were collected to quantify the impact of intervention on the level of drudgery of worker before and after the technology intervention from sample of 30 respondents (15 male and 15 female) selected randomly from village Shahpur. Gain in knowledge and change in awareness level were calculated after the training.Evaluation of field validation of technology on drudgery of men & women was done after its use in the field conditions. A significant gain in awareness was observed among both men(2.6) & women (3.0) whereas the gain in knowledge was more among men (6.6) than women (4.5). In evaluation of field validation of technology on drudgery it was found that all the five technologies reduced the drudgery of men as well as women. However wheel hand hoe was used successfully by men in comparison to women who preferred to use their conventional technology i.e improved long-handled hoe. Evaluation of validation trials of the technologies reported that improved sickle was used successfully by both men & women farmers. More than half of the men farmers (53.3%) & only 13.3 percent women farmers preferred the wheel hand hoe over the traditional one as they found it four times more efficient in terms of time, energy & money saving. Cot bag was preferred by the

New technologies to meet regulations

International Nuclear Information System (INIS)

Frank, C.; Harmon, L.

1991-01-01

The US Department of Energy's (DOE's) Office of Environmental Restoration and Waste Management has set the ambitious goal of having all of its facilities cleaned up and in compliance with applicable environmental laws and regulations by the year 2019. This goal is ambitious both because of the magnitude of the effort required and because, in many cases, the means for attaining the goal do not now exist. The DOE's strategy for reaching its goal is based on applied research and development, education, and cooperation with regulators. The Office of Technology Development (OTD) within the Office of Environmental Restoration and Waste Management has instituted a program to assess the magnitude of the cleanup effort and to evaluate the potential technologies to be used. The OTD has program responsibility for providing new and more effective technologies for meeting DOE's goal for compliance and cleanup. Included are research and development of new technologies; demonstration, testing, and evaluation of technologies developed elsewhere; transportation; and educational programs to produce the scientists and engineers needed to maintain the momentum of research, development, demonstration, testing, and evaluation (RDDT and E) until the job is complete

Review and evaluation of alternative chemical disposal technologies

National Research Council Canada - National Science Library

National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

.... In light of the fact that alternative technologies have evolved since the 1994 study, this new volume evaluates five Army-chosen alternatives to the baseline incineration system for the disposal...

Reactor engineering department annual report

International Nuclear Information System (INIS)

1990-09-01

This report summarizes the research and development activities in the Department of Reactor Engineering during the fiscal year of 1989 (April 1, 1989 - March 31, 1990). One of major Department's programs is the assessment of the high conversion light water reactor and the design activities of advanced reactor system. Development of a high energy proton linear accelerator for the nuclear engineering including is also TRU incineration promoted. Other major tasks of the Department are various basic researches on nuclear data and group constants, theoretical methods and code development, on reactor physics experiments and analyses, fusion neutronics, radiation shielding, reactor instrumentation, reactor control/diagnosis, thermohydraulics, technology assessment of nuclear energy and technology developments related to the reactor physics facilities. The cooperative works to JAERI's major projects such as the high temperature gas cooled reactor or the fusion reactor and to PNC's fast reactor project also progressed. The activities of the Research Committee on Reactor Physics are also summarized. (author)

End-User Evaluations of Semantic Web Technologies

Energy Technology Data Exchange (ETDEWEB)

McCool, Rob; Cowell, Andrew J.; Thurman, David A.

2005-11-07

Stanford University's Knowledge Systems Laboratory (KSL) is working in partnership with Battelle Memorial Institute and IBM Watson Research Center to develop a suite of technologies for information extraction, knowledge representation & reasoning, and human-information interaction, in unison entitled 'Knowledge Associates for Novel Intelligence' (KANI). We have developed an integrated analytic environment composed of a collection of analyst associates, software components that aid the user at different stages of the information analysis process. An important part of our participatory design process has been to ensure our technologies and designs are tightly integrate with the needs and requirements of our end users, To this end, we perform a sequence of evaluations towards the end of the development process that ensure the technologies are both functional and usable. This paper reports on that process.

Department of Defense Research, Development, Test, and Evaluation (RDT and E): Appropriations Structure

Science.gov (United States)

2016-12-13

Research Projects Agency website, accessed December 5, 2016, http://www.darpa.mil/about-us/mission. Appropriations Structure of Defense RDT&E...funding streams. Among the many other factors that may affect the effectiveness of the performance of RDT&E are: organizational structures and...Department of Defense Research, Development, Test, and Evaluation (RDT&E): Appropriations Structure John F. Sargent Jr. Specialist in

DOE/EPA sludge irradiation technology transfer program

International Nuclear Information System (INIS)

Ahlstrom, S.B.

1980-01-01

The cesium-137 sludge irradiation program has successfully progressed through the phases of technology development and pilot plant evaluation and has entered the technology transfer phase. Initial technology transfer activities have identified a growing interest among wastewater engineers and public officials to learn more about the application of irradiation in sludge treatment. As a result, a formal technology transfer program has been developed. As a major activity of this program, it is planned that the US Department of Energy, working with the US Environmental Protection Agency, state and local governments, will support the placement of five to 10 sludge irradiators at selected wastewater treatment facilities throughout the United States. Facilities which may best benefit from this process technology are being identified. Technology transfer will be stimulated as engineers and wastewater officials become familiar with the evaluation and implementation of sludge irradiation at these sites

An evaluation of supersonic STOVL technology

Science.gov (United States)

Kidwell, G. H., Jr.; Lampkin, B. A.

1983-01-01

The purpose of this paper is to document the status of supersonic STOVL aircraft technology. The major focus is the presentation of summaries of pertinent aspects of supersonic STOVL technology, such as justification for STOVL aircraft, current designs and their recognized areas of uncertainty, recent research programs, current activities, plans, etc. The remainder of the paper is an evaluation of the performance differential between a current supersonic STOVL design and three production (or near production) fighters, one of them the AV-8B. The results indicate that there is not a large range difference between a STOL aircraft and a STOVL aircraft, and that other aspects of performance, such as field performance or combat maneuverability, may more than make up for this decrement.

Systems Analysis Department. Annual Report 2003

Energy Technology Data Exchange (ETDEWEB)

Larsen, H.; Olsson, C. (eds.)

2004-04-01

This report describes the work of the Systems Analysis Department at Risoe National Laboratory during 2003. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning UNEP Centre, Safety, Reliability and Human Factors, and Technology Scenarios. The report includes summary statistics and list of staff members. (au)

Annual report 1987 Materials Department

International Nuclear Information System (INIS)

1989-01-01

Review of the activities performed by the Materials Department of the National Atomica Energy Commission of the Argentine Republic during the year 1987. The Department provides services and assistance in all matters related to metallography and special techniques, corrosion and materials' transport, transport phenomena, casting and solidification, damage by radiation, thermomechanical treatments, mechanical properties, fatigue and fracture, multinational project of research and development in materials, VII course on metallurgy and technology of materials. Likewise, information on the Materials Department's staff, its publications, projects and agreements, seminars, courses and conferences during 1987 is included [es

Department of Accelerator Physics and Technology: Overview

International Nuclear Information System (INIS)

Pachan, M.

2002-01-01

Full text:Due to financial shortages, the Extensive Research Program ''Isotopes and Accelerators'' did not come into effect. This in consequence limited the scope of new design and construction works. As the most important topic remained the continuation of work on Ordered Project for new therapeutical accelerator ''6/15''. It has to be emphasized that during realization of this task, several significant modifications were introduced to get a final solution better matched to future implementation of the prototype. The initially adopted ''classical'' solution of accelerating structure with separate bunching and accelerating sections, was replaced by a single mechanical unit with both incorporated functional subsystems. This solution is more convenient for future production and servicing, but in order to cover the broad range of energy variation is was necessary to recalculate the beam dynamics and to find the method for internal phase correction. Another important feature was an additional design of two possible injection systems, the first with a diode gun for 40 keV energy, and the second one with triode gun 15-20 keV. These solutions provide a contingency for - two production versions of an accelerator equipped with different RF power systems - klystron or magnetron. Substantial effort was directed to completion and operation of an experimental facility for testing accelerating structures. This facility is equipped with a RF high - power source in the form of 6 MW klystron, and high-vacuum pumping system. External apparatus connected to the facility are - magnetic spectrometer and computerized water phantom, which enable the diagnostics of accelerated electron beam. Several structure models were tested, and for the first time an electron energy in the vicinity of 15 MeV was registered. Other important subjects in (he Department's activity were: * Implementation of new versions of MC codes, for analysis of electron and photon beams distribution at the output of

Works Technical Department progress report, March 1961

Energy Technology Data Exchange (ETDEWEB)

None

1961-04-19

This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

A geoscientist in the State Department

Science.gov (United States)

Prather, Michael J.

2006-12-01

It must have been in a fit of idealism, à la Jimmy Stewart, that I applied to be a Jefferson Science Fellow (JSF) at the U.S. Department of State in the summer of 2004. The flyer was appealing, offering an opportunity to become "directly involved with the State Department, applying current knowledge of science and technology in support of the development of U.S. international policy. The Jefferson Science Fellowships enable academic scientists and engineers to act as consultants to the State Department on matters of science, technology, and engineering as they affect foreign policy."My own science—elating to ozone depletion, climate change, and aviation environmental impacts—often has been at the science-policy interface. As a result, I have attended governmental and intergovernmental meetings, particularly the international assessments on climate change and ozone depletion. I had even come to know the State Department team on climate negotiations, although I had never been inside the State Department. The appeal of working on the inside of negotiations within the United Nations Framework Convention on Climate Change was strong—if only to find out what an 'interlocutor' was.

Healthy China 2020 : Policy and Technology Evaluation | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Healthy China 2020 : Policy and Technology Evaluation ... aimed at providing a blueprint for universal basic healthcare coverage for all by 2020. ... Implementing clinical pathway management and reforming compensation mechanism in rural ...

Exploring the relationship between costs and quality. Does the joint evaluation of costs and quality alter the rankings of Danish hospital departments?

DEFF Research Database (Denmark)

Hvenegaard, Anne; Nielsen Arendt, Jacob; Street, Andrew

2011-01-01

vascular departments, we estimate fixed effect models for costs (linear) and quality (logistic). We consider two quality measures; mortality and wound complications. To assess whether the joint evaluation of costs and quality affects the ranking of departments, we construct joint confidence regions......OBJECTIVE: The purpose is to evaluate the relationship between costs and quality and to assess whether the joint evaluation of costs and quality affects the ranking of hospital departments relative to comparison based on costs alone. METHODS: Using patient level data for 3,754 patients in six...... for each pair of departmental effects for costs and quality using a bootstrap method and rank departments according to their cost-effectiveness ratio. The findings are used to evaluate a theory of a U-shaped cost/quality relationship. RESULTS: The association between cost and quality differs depending...

75 FR 65462 - Renewal of Department of Defense Federal Advisory Committee; Department of Defense Military...

Science.gov (United States)

2010-10-25

... Committee; Department of Defense Military Family Readiness Council AGENCY: Department of Defense (DoD... renewing the charter for the Department of Defense Military Family Readiness Council (hereafter referred to... requirements for the support of military family readiness by the Department of Defense; and (c) evaluate and...

Optics and Plasma Research Department. Annual progress report for 2004

International Nuclear Information System (INIS)

Bindslev, H.; Lynov, J.P.; Pedersen, C.; Petersen, P.M.; Skaarup, B.

2005-03-01

The Optics and Plasma Research Department performs basic and applied research within three scientific programmes: (1) laser systems and optical materials, (2) optical diagnostics and information processing and (3) plasma physics and technology. The department has core competencies in optical sensors, optical materials, biophotonics, fusion plasma physics, and industrial plasma technology. The department employs key technologies in micro- and nanotechnology for optical systems, temperature calibration, and infrared measurement techniques. The research is supported by several EU programmes, including EURATOM, by Danish research councils and by industry. A summary of the activities in 2004 is presented. (au)

Hyperspectral Technology Transfer to the US Department of Interior: Summary of Results of the NASA/DOI Hyperspectral Technology Transfer Project

Science.gov (United States)

Root, Ralph; Wickland, Diane

2001-01-01

In 1997 the Office of Biological Informatics and Outreach (OBIO), Biological Resources Division, US Geological Survey and NASA, Office of Earth Science (OES), initiated a coordinated effort for applying Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) data and analysis, as a technology transfer project, to critical DOI environmental issues in four study sites throughout the United States. This work was accomplished by four US Department of the Interior (DOI) study teams with support from NASA/OES principal investigators and the Office of Earth Science programs. The studies, including personnel, objectives, background, project plans, and milestones were documented in a project website at . This report summarizes the final outcomes of the project, detailing accomplishments, lessons learned, and benefits realized to NASA, the US Geological Survey, and the participating DOI bureaus.

Annual report 1982 of the Central Safety Department

International Nuclear Information System (INIS)

Kiefer, H.; Koelzer, W.; Koenig, L.A.

1983-04-01

The Safety Officer and the Security Officer are responsible for radiation protection and technical safety, both conventional and nuclear, for the physical protection as well as the safeguards of nuclear materials and radioactive substances within the Kernforschungszentrum Karlsruhe GmbH (KfK). To fulfill these functions they rely on the assistance of the Safety Department. The duties of this Department cover tasks relative to radiation protection, safety and security on behalf of the institutes and departments of KfK and environmental monitoring for the whole Karlsruhe Nuclear Research Center as well as research and development work, mainly performed under the Nuclear Safety Project. The centers of interest of r + d activities are: investigation of the atmospheric diffusion of nuclear pollutants on the micro- and meso-scales, evaluation of the radiological consequences of accidents in reactors under probabilistic aspects, studies of the physical and chemical behavior of radionuclides with particularly high biological effectiveness in the environment, improvements in radiation protection measurement technology. This report gives details of the different duties, indicates the results of 1982 routine tasks and reports about results of investigations and developments of the working groups of the Department. The reader is referred to the English translation of the Table of Contents and of Chapter 1 describing the duties and organization of the Central Safety Department. (orig.) [de

Systems Analysis Department annual progress report 1999

DEFF Research Database (Denmark)

2000-01-01

This report describes the work of the Systems Analysis Department at Risø National Laboratory during 1999. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning - UNEP Centre, Safety,Realiability and Human Factors, and Technology...

Sustainability Of Electricity Supply Technologies under German Conditions: A Comparative Evaluation

International Nuclear Information System (INIS)

Hirschberg, S; Dones, R.; Heck, T.; Burgherr, P.; Schenler, W.; Bauer, C.

2004-12-01

On behalf of the International Committee on Nuclear Technology (ILK) the Paul Scherrer Institut carried out a comparative study addressing the sustainability of electricity supply technologies operating under German-specific conditions. The general objective of this analysis was to provide a support for the formulation of ILK position on the sustainability of various electricity supply technologies, with special emphasis on nuclear energy. The evaluation covers selected current fossil, nuclear and renewable technologies, which are representative for the average conditions in Germany. Two methods of indicator aggregation were employed, i.e. estimation of total (internal and extemal) costs and Multi-criteria Decision Analysis (MCDA). Use of MCDA is motivated by acknowledgement of the role of value judgements in decision-making. Both total costs and MCDA-based technology-specific total scores are useful comparative indicators of sustainability. Sustainability perspective implies a balanced (equal) importance assignment to economic, ecological and social aspects. In summary, this study provides a framework for systematic evaluation of sustainability of energy systems. Refinements of the methodology and specific indicators are feasible. Options for future applications include direct involvement of stakeholders, and evaluations of future technologies and of supply scenarios combining the various candidate technologies. Tools supporting such analyses have been developed by PSI and can be adjusted to the needs of country-specific applications. (author)

Assistive Technology for Persons with Physical Disabilities: Evaluation and Outcomes

NARCIS (Netherlands)

Rigby, P.J.

2009-01-01

This thesis presents a compilation of published studies that evaluated assistive technology interventions for children and adults with physical disabilities. The first chapter introduces the need for and the challenges involved in studying the outcomes of assistive technology interventions. The

TECHNOLOGY EVALUATION FOR CONDITIONING OF HANFORD TANK WASTE USING SOLIDS SEGREGATION AND SIZE REDUCTION

Energy Technology Data Exchange (ETDEWEB)

Restivo, M.; Stone, M.; Herman, D.; Lambert, D.; Duignan, M.; SMITH, G.; WELLS, B.; LUMETTA, G.; ENDRELIN, C.; ADKINS, H.

2014-04-15

The Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL) team performed a literature search on current and proposed technologies for solids segregation and size reduction of particles in the slurry feed from the Hanford Tank Farm (HTF). The team also investigated technology research performed on waste tank slurries, both real and simulated, and reviewed academic theory applicable to solids segregation and size reduction. This review included text book applications and theory, commercial applications suitable for a nuclear environment, research of commercial technologies suitable for a nuclear environment, and those technologies installed in a nuclear environment, including technologies implemented at Department of Energy (DOE) facilities. Information on each technology is provided in this report along with the advantages and disadvantages of the technologies for this application.

Systems Analysis Department annual report 2003

DEFF Research Database (Denmark)

2004-01-01

This report describes the work of the Systems Analysis Department at Risø National Laboratory during 2003. The department is undertaking research within Energy Systems Analysis, Energy, Environment and Development Planning – UNEP Centre, Safety,Reliability and Human Factors, and Technology...... Scenarios. The report includes summary statistics and list of staff members....

Smart technology

International Nuclear Information System (INIS)

Bruckner, D.G.

1991-01-01

The success of smart technology in the pursuit of the Gulf War has accentuated the awareness of how the Safeguards and Security disciplines are changing in response to new weaponry. Throughout the Department of Energy Integrated Complex (IC) Safeguards and Security efforts such as: Protection Programs Operations; Materials, Controls and Accountability; Information Security; Computer Security; Operational Security; Personnel Security, Safeguards and/or Security (S and S) surveys, and Inspections and Evaluations are undergoing a reassessment and refocusing. Some of this is in response to such things as the DOE initiated Freeze Report and the Drell Report. An important aspect is also technological, adjusting the way business is done in light of the weapons, tools and processes/procedures becoming available. This paper addresses the S and S issues with the promise of using smart technology to develop new approaches and equipment across the IC

Evaluating Basic Technology Instruction in Nigerian Secondary ...

African Journals Online (AJOL)

It is an important technique which when appropriately adopted results into effective teaching and learning of practical subjects. This study focused on identification of evaluating techniques aimed at improving the teaching of Basic technology in Edo State. The area of study comprises of the eighteen Local Government Areas ...

Site Characterization Analysis Penetrometer System (SCAPS): An Innovative Technology Evaluation Report

National Research Council Canada - National Science Library

Jack, Lary

1995-01-01

... of subsurface soil at hazardous waste sites. The effectiveness of each technology was evaluated by comparing each technology's results to the results obtained using conventional reference methods...

28 August 2013 - Director of Technical Quality Management Head of ESTEC Establishment European Space Agency F. Ongaro visiting the LHC tunnel at Point 1 with Technology Department Head F. Bordry and Technology Department J.-P. Tock; visiting the ATLAS experimental area with ATLAS Deputy Spokesperson T. Wengler and signing the guest book with CERN Director-General R. Heuer. Accompanied throughout by F. Bordry and V. Parma.

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

28 August 2013 - Director of Technical Quality Management Head of ESTEC Establishment European Space Agency F. Ongaro visiting the LHC tunnel at Point 1 with Technology Department Head F. Bordry and Technology Department J.-P. Tock; visiting the ATLAS experimental area with ATLAS Deputy Spokesperson T. Wengler and signing the guest book with CERN Director-General R. Heuer. Accompanied throughout by F. Bordry and V. Parma.

Evaluating HDR photos using Web 2.0 technology

Science.gov (United States)

Qiu, Guoping; Mei, Yujie; Duan, Jiang

2011-01-01

High dynamic range (HDR) photography is an emerging technology that has the potential to dramatically enhance the visual quality and realism of digital photos. One of the key technical challenges of HDR photography is displaying HDR photos on conventional devices through tone mapping or dynamic range compression. Although many different tone mapping techniques have been developed in recent years, evaluating tone mapping operators prove to be extremely difficult. Web2.0, social media and crowd-sourcing are emerging Internet technologies which can be harnessed to harvest the brain power of the mass to solve difficult problems in science, engineering and businesses. Paired comparison is used in the scientific study of preferences and attitudes and has been shown to be capable of obtaining an interval-scale ordering of items along a psychometric dimension such as preference or importance. In this paper, we exploit these technologies for evaluating HDR tone mapping algorithms. We have developed a Web2.0 style system that enables Internet users from anywhere to evaluate tone mapped HDR photos at any time. We adopt a simple paired comparison protocol, Internet users are presented a pair of tone mapped images and are simply asked to select the one that they think is better or click a "no difference" button. These user inputs are collected in the web server and analyzed by a rank aggregation algorithm which ranks the tone mapped photos according to the votes they received. We present experimental results which demonstrate that the emerging Internet technologies can be exploited as a new paradigm for evaluating HDR tone mapping algorithms. The advantages of this approach include the potential of collecting large user inputs under a variety of viewing environments rather than limited user participation under controlled laboratory environments thus enabling more robust and reliable quality assessment. We also present data analysis to correlate user generated qualitative

A Survey on Economic-driven Evaluations of Information Technology

NARCIS (Netherlands)

Mutschler, B.B.; Zarvic, N.; Reichert, M.U.

2007-01-01

The economic-driven evaluation of information technology (IT) has become an important instrument in the management of IT projects. Numerous approaches have been developed to quantify the costs of an IT investment and its assumed profit, to evaluate its impact on business process performance, and to

Spatial Modeling of a New Technological Typification in Forestry Based on Multicriteria Evaluation of Skidding Technologies

Directory of Open Access Journals (Sweden)

Michal Synek

2015-01-01

Full Text Available The study describes a new system of technological typification in forestry based on multicriteria evaluation of environmentally friendly use of common skidding technologies. A farm tractor, skidder, cable system, forwarder, and forwarder in combination with harvester were selected as model skidding technologies. The proposed model determines one of the four categories in terms of their environmentally friendly use: 1 Fully suitable, 2 Suitable, 3 Unsuitable – not excluded and 4 Unsuitable for every forest stand and individual skidding technology. The Saaty matrix was used to define weights of input parameters for multicriteria evaluation. The selected input parameters included: slope inclination, ground bearing capacity, risk of logging-transportation erosion hazard, presence and size of obstacles, skidding distance, terrain shape and age of stands. Stocking and areal representation of selected tree species were added to the evaluation of forwarder-harvester combination. Different equipment (standard tires, low-pressure tires, wheel tracks and climatic conditions (dry, wet were also taken into account in the evaluation of the model. A multicriteria evaluation was carried out by means of GIS tools in SW ESRI ArcGIS Desktop. The model was applied to the selected experimental territory in the upper part of the basin of the Oskava river and it was verified in different forest stands and terrain conditions in the northern part of the Mendel University Training Forest Enterprise Křtiny. Verification of model results was carried out in randomly selected stands with the overall area representing more than 10% of the total forest area in the experimental territory and more than 8% of the total forest area in the verification territory.

Department of Radiation Detectors: Overview

International Nuclear Information System (INIS)

Piekoszewski, J.

1999-01-01

Full text: Work carried out in 1998 in the Department of Radiation Detectors concentrated on three subjects: (i) Semiconductor Detectors (ii) X-ray Tube Generators (iii) Material Modification Using Ion and Plasma Beams. SEMICONDUCTOR DETECTORS: Semiconductor detectors of ionizing radiation are among the basic tools utilized in such fields of research and industry as nuclear physics, high energy physics, medical (oncology) radiotherapy, radiological protection, environmental monitoring, energy dispersive X-ray fluorescence non-destructive analysis of chemical composition, nuclear power industry. The departmental objectives are: a search for new types of detectors; producing unique detectors tailored for physics experiments; manufacturing standard detectors for radiation measuring instruments; scientific development of the staff. These objectives were accomplished in 1998 particularly by: research on unique thin silicon detectors for identification of particles in E-ΔE telescopes, modernization of technology of manufacturing Ge(Li) detectors capable of detecting broader range of gamma energies, manufacturing detectors developed in previous years, re-generating and servicing customer detectors of various origin. In accomplishment of the above the Department co-operated with groups of physicists from IPJ, PAN Institute of Physics (Warsaw), and with some technology Institutes based in Warsaw (ITME, ITE). Some detectors and services have been delivered to customers on a commercial basis. X-Ray TUBE GENERATORS: The Department conducts research on design and technology of manufacturing X-ray generators as well as on imaging and dosimetry of X-ray beams. Various models of special construction X-ray tubes and their power supplies are under construction. In 1998 work concentrated on: completing laboratory equipment for manufacturing X-ray tubes and their components, developing technology of manufacturing X-ray tubes and their components, completing a laboratory set-up with

Acceptance of genetically modified foods: the relation between technology and evaluation.

Science.gov (United States)

Tenbült, Petra; De Vries, Nanne K; van Breukelen, Gerard; Dreezens, Ellen; Martijn, Carolien

2008-07-01

This study investigates why consumers accept different genetically modified food products to different extents. The study shows that whether food products are genetically modified or not and whether they are processed or not are the two important features that affect the acceptance of food products and their evaluation (in terms of perceived healthiness, naturalness, necessity and tastiness). The extent to which these evaluation attributes and acceptance of a product are affected by genetic modification or processing depends on whether the product is negatively affected by the other technology: Any technological change to a 'natural' product (when nonprocessed products are genetically modified or when non-genetically modified products are processed) affect evaluation and acceptance stronger than a change to an technologically adapted product (when processed products are also genetically modified or vice versa). Furthermore, evaluation attributes appear to mediate the effects of genetic modification and processing on acceptance.