WorldWideScience

Sample records for technology evaluation center

  1. Evaluating an Assistive Technology Resource Center in Taiwan

    Science.gov (United States)

    Ho, Hua-Kuo

    2010-01-01

    The purpose of this article is intended to present the procedure and outcomes of an evaluation of the Assistive Technology Resource Center in a city of Taiwan. The evaluation was initiated by Chiayi City Government through inviting three professionals in the field of assistive technology as evaluators. For the purpose of evaluation, the Executive…

  2. Technology evaluation center assessment synopsis: full-field digital mammography.

    Science.gov (United States)

    Rothenberg, Barbara M; Ziegler, Kathleen M; Aronson, Naomi

    2006-08-01

    Full-field digital mammography (FFDM) is proposed as an alternative to screen-film mammography (SFM). The ability to separate and optimize the acquisition, storage, and display of images may allow greater visualization of breast cancers at equal or lower radiation doses, especially in younger women and those with denser breasts. This is a synopsis of a systematic review by the Blue Cross Blue Shield Association Technology Evaluation Center. This updated systematic review primarily incorporated the results of the ACR Imaging Network(R) Digital Mammographic Imaging Screening Trial (DMIST), which provided results on 42,760 asymptomatic women who underwent both FFDM and SFM and showed with reasonable certainty that there was no difference in the accuracy of the 2 modalities for asymptomatic women in general, with some advantages of FFDM in certain subgroups. There were no strong, new studies on the use of digital mammography compared with film mammography in a diagnostic population. However, the DMIST results indicated that tumors detected by FFDM, but not by SFM, were likely to be invasive carcinomas or medium-grade to high-grade ductal carcinoma in situ. On the basis of the suppositions that these are the cancers of greatest interest and the ones more likely to be found in a diagnostic population and that the diagnostic population may be younger on average than the screening population, it was concluded that there is sufficient evidence to support the use of FFDM for diagnostic purposes.

  3. Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

    Science.gov (United States)

    O'Neil, Dara

    2002-01-01

    Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

  4. National Fuel Cell Technology Evaluation Center (NFCTEC); (NREL) National Renewable Energy Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Jennifer; Sprik, Sam

    2014-03-11

    This presentation gives an overview of the National Fuel Cell Technology Evaluation Center (NFCTEC), describes how NFCTEC benefits the hydrogen and fuel cell community, and introduces a new fuel cell cost/price aggregation project.

  5. Mississippi Technology Transfer Center

    Science.gov (United States)

    1987-01-01

    The Mississippi Technology Transfer Center at the John C. Stennis Space Center in Hancock County, Miss., was officially dedicated in 1987. The center is home to several state agencies as well as the Center For Higher Learning.

  6. The Center for Research and Evaluation in the Application of Technology to Education.

    Science.gov (United States)

    Rubin, David P.; Weisgerber, Robert A.

    1985-01-01

    The Center for Research and Development in the Application of Technology to Education project identifies effective uses of new technologies for the learning disabled. Areas investigated include effective instructional design principles, program design strategies, adjusting technology for individual learners, software development, and use of…

  7. "Infotonics Technology Center"

    Energy Technology Data Exchange (ETDEWEB)

    Fritzemeier, L. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Boysel, M. B. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Smith, D. R. [Infotonics Technology Center Inc., Canandaigua, NY (United States)

    2004-09-30

    During this grant period July 15, 2002 thru September 30, 2004, the Infotonics Technology Center developed the critical infrastructure and technical expertise necessary to accelerate the development of sensors, alternative lighting and power sources, and other specific subtopics of interest to Department of Energy. Infotonics fosters collaboration among industry, universities and government and operates as a national center of excellence to drive photonics and microsystems development and commercialization. A main goal of the Center is to establish a unique, world-class research and development facility. A state-of-the-art microsystems prototype and pilot fabrication facility was established to enable rapid commercialization of new products of particular interest to DOE. The Center has three primary areas of photonics and microsystems competency: device research and engineering, packaging and assembly, and prototype and pilot-scale fabrication. Center activities focused on next generation optical communication networks, advanced imaging and information sensors and systems, micro-fluidic systems, assembly and packaging technologies, and biochemical sensors. With targeted research programs guided by the wealth of expertise of Infotonics business and scientific staff, the fabrication and packaging facility supports and accelerates innovative technology development of special interest to DOE in support of its mission and strategic defense, energy, and science goals.

  8. Morgantown Energy Technology Center, technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

  9. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-10-31

    The Deactivation and Decommissioning (D&D) Technology Assessment Program (TAP) was developed to provide detailed, comparable data for environmental technologies and to disseminate this data to D&D professionals in a manner that will facilitate the review and selection of technologies to perform decontamination and decommissioning. The objectives for this project include the following: Determine technology needs through review of the Site Technology Coordination Group (STCG) information and other applicable websites and needs databases; Perform a detailed review of industries that perform similar activities as those required in D&D operations to identify additional technologies; Define the technology assessment program for characterization and waste management problem sets; Define the data management program for characterization, dismantlement, and waste management problem sets; Evaluate baseline and innovative technologies under standard test conditions at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and other locations and collect data in the areas of performance, cost, health and safety, operations and maintenance, and primary and secondary waste generation; Continue to locate, verify, and incorporate technology performance data from other sources into the multimedia information system; and Develop the conceptual design for a dismantlement technology decision analysis tool for dismantlement technologies.

  10. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  11. An evaluation of the role played by remote sensing technology following the World Trade Center attack

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Remote sensing technology has been widely recognized for contributing to emergency response efforts after the World Trade Center attack on September 11th, 2001. The need to coordinate activities in the midst of a dense, yet relatively small area, made the combination of imagery and mapped data strategically useful. This paper reviews the role played by aerial photography, satellite imagery, and LIDAR data at Ground Zero. It examines how emergency managers utilized these datasets, and identifies significant problems that were encountered. It goes on to explore additional ways in which imagery could have been used, while presenting recommendations for more effective use in future disasters and Homeland Security applications. To plan adequately for future events, it was important to capture knowledge from individuals who responded to the World Trade Center attack. In recognition, interviews with key emergency management and geographic information system (GIS) personnel provide the basis of this paper. Successful techniques should not be forgotten, or serious problems dismissed. Although widely used after September 11th, it is important to recognize that with better planning, remote sensing and GIS could have played an even greater role. Together with a data acquisition timeline, an expanded discussion of these issues is available in the MCEER/NSF report "Emergency Response in the Wake of the World Trade Center Attack: The Remote Sensing Perspective" (Huyck and Adams, 2002).

  12. Solar Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Bob

    2011-04-27

    The Department of Energy, Golden Field Office, awarded a grant to the UNLV Research Foundation (UNLVRF) on August 1, 2005 to develop a solar and renewable energy information center. The Solar Technology Center (STC) is to be developed in two phases, with Phase I consisting of all activities necessary to determine feasibility of the project, including design and engineering, identification of land access issues and permitting necessary to determine project viability without permanently disturbing the project site, and completion of a National Environmental Policy Act (NEPA) Environmental Assessment. Phase II is the installation of infrastructure and related structures, which leads to commencement of operations of the STC. The STC is located in the Boulder City designated 3,000-acre Eldorado Valley Energy Zone, approximately 15 miles southwest of downtown Boulder City and fronting on Eldorado Valley Drive. The 33-acre vacant parcel has been leased to the Nevada Test Site Development Corporation (NTSDC) by Boulder City to accommodate a planned facility that will be synergistic with present and planned energy projects in the Zone. The parcel will be developed by the UNLVRF. The NTSDC is the economic development arm of the UNLVRF. UNLVRF will be the entity responsible for overseeing the lease and the development project to assure compliance with the lease stipulations established by Boulder City. The STC will be operated and maintained by University of Nevada, Las Vegas (UNLV) and its Center for Energy Research (UNLV-CER). Land parcels in the Eldorado Valley Energy Zone near the 33-acre lease are committed to the construction and operation of an electrical grid connected solar energy production facility. Other projects supporting renewable and solar technologies have been developed within the energy zone, with several more developments in the horizon.

  13. Alternative Evaluation Designs for Data-Centered Technology-Based Geoscience Education Projects

    Science.gov (United States)

    Zalles, D. R.

    2012-12-01

    This paper will present different strategies for how to evaluate contrasting K-12 geoscience classroom-based interventions with different goals, leveraging the first author's experiences as principal investigator of four NSF and NASA-funded geoscience education projects. Results will also be reported. Each project had its own distinctive features but all had in common the broad goal of bringing to high school classrooms uses of real place-based geospatial data to study the relationships of Earth system phenomena to climate change and sustainability. The first project's goal was to produce templates and exemplars for curriculum and assessment designs around studying contrasting geoscience topics with different data sets and forms of data representation. The project produced a near transfer performance assessment task in which students who studied climate trends in Phoenix turned their attention to climate in Chicago. The evaluation looked at the technical quality of the assessment instrument as measured by inter-rater reliability. It then analyzed the assessment results against student responses to the instructional tasks about Phoenix. The evaluation proved useful in pinpointing areas of student strength and weakness on different inquiry tasks, from simple map interpretation to analysis of contrasting claims about what the data indicate. The goal of the second project was to produce an exemplar curriculum unit that bridges Western science and traditional American Indian ecological knowledge for student learning and skill building about local environmental sustainability issues. The evaluation looked at the extent to which Western and traditional perspectives were incorporated into the design of the curriculum. The curriculum was not constructed with a separate assessment, yet evidence centered design was utilized to extrapolate from the exemplar unit templates for future instructional and assessment tasks around other places, other sustainability problems, and

  14. THE RETRIEVAL KNOWLEDGE CENTER EVALUATION OF LOW TANK LEVEL MIXING TECHNOLOGIES FOR DOE HIGH LEVEL WASTE TANK RETRIEVAL 10516

    Energy Technology Data Exchange (ETDEWEB)

    Fellinger, A.

    2009-12-08

    The Department of Energy (DOE) Complex has over two-hundred underground storage tanks containing over 80-million gallons of legacy waste from the production of nuclear weapons. The majority of the waste is located at four major sites across the nation and is planned for treatment over a period of almost forty years. The DOE Office of Technology Innovation & Development within the Office of Environmental Management (DOE-EM) sponsors technology research and development programs to support processing advancements and technology maturation designed to improve the costs and schedule for disposal of the waste and closure of the tanks. Within the waste processing focus area are numerous technical initiatives which included the development of a suite of waste removal technologies to address the need for proven equipment and techniques to remove high level radioactive wastes from the waste tanks that are now over fifty years old. In an effort to enhance the efficiency of waste retrieval operations, the DOE-EM Office of Technology Innovation & Development funded an effort to improve communications and information sharing between the DOE's major waste tank locations as it relates to retrieval. The task, dubbed the Retrieval Knowledge Center (RKC) was co-lead by the Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL) with core team members representing the Oak Ridge and Idaho sites, as well as, site contractors responsible for waste tank operations. One of the greatest challenges to the processing and closure of many of the tanks is complete removal of all tank contents. Sizeable challenges exist for retrieving waste from High Level Waste (HLW) tanks; with complications that are not normally found with tank retrieval in commercial applications. Technologies currently in use for waste retrieval are generally adequate for bulk removal; however, removal of tank heels, the materials settled in the bottom of the tank, using the same

  15. Technology Evaluations Related to Mercury, Technetium, and Chloride in Treatment of Wastes at the Idaho Nuclear Technology and Engineering Center of the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    C. M. Barnes; D. D. Taylor; S. C. Ashworth; J. B. Bosley; D. R. Haefner

    1999-10-01

    The Idaho High-Level Waste and Facility Disposition Environmental Impact Statement defines alternative for treating and disposing of wastes stored at the Idaho Nuclear Technology and Engineering Center. Development is required for several technologies under consideration for treatment of these wastes. This report contains evaluations of whether specific treatment is needed and if so, by what methods, to remove mercury, technetium, and chlorides in proposed Environmental Impact Statement treatment processes. The evaluations of mercury include a review of regulatory requirements that would apply to mercury wastes in separations processes, an evaluation of the sensitivity of mercury flowrates and concentrations to changes in separations processing schemes and conditions, test results from laboratory-scale experiments of precipitation of mercury by sulfide precipitation agents from the TRUEX carbonate wash effluent, and evaluations of methods to remove mercury from New Waste Calcining Facility liquid and gaseous streams. The evaluation of technetium relates to the need for technetium removal and alternative methods to remove technetium from streams in separations processes. The need for removal of chlorides from New Waste Calcining Facility scrub solution is also evaluated.

  16. An International Development Technology Center

    Science.gov (United States)

    Morgan, Robert P.

    1969-01-01

    Main focus of the Center is "the application of science and technology to the solution of problems faced by people in less-developed areas of the world. Adapted from paper presented at ASEE Annual Meeting, The Pennsylvania State University, June, 1969. (Author/WM)

  17. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-04-30

    The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

  18. NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners. With specialized teams, TTC guides the interactions of our partners from the point of discovery to patenting, from invention development to licensing. We play a key role in helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class researchers, facilities, and knowledge.

  19. Establishing and evaluating bar-code technology in blood sampling system: a model based on human centered human-centered design method.

    Science.gov (United States)

    Chou, Shin-Shang; Yan, Hsiu-Fang; Huang, Hsiu-Ya; Tseng, Kuan-Jui; Kuo, Shu-Chen

    2012-01-01

    This study intended to use a human-centered design study method to develop a bar-code technology in blood sampling process. By using the multilevel analysis to gather the information, the bar-code technology has been constructed to identify the patient's identification, simplify the work process, and prevent medical error rates. A Technology Acceptance Model questionnaire was developed to assess the effectiveness of system and the data of patient's identification and sample errors were collected daily. The average scores of 8 items users' perceived ease of use was 25.21(3.72), 9 items users' perceived usefulness was 28.53(5.00), and 14 items task-technology fit was 52.24(7.09), the rate of patient identification error and samples with order cancelled were down to zero, however, new errors were generated after the new system deployed; which were the position of barcode stickers on the sample tubes. Overall, more than half of nurses (62.5%) were willing to use the new system.

  20. Center for Advanced Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, Rick

    2013-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, CAST is now a five-university consortium – Virginia Tech, West Virginia University, University of Kentucky, University of Utah and Montana Tech, - that is supported through U.S. DOE Cooperative Agreement No. DE-FE0000699, Center for Advanced Separation Technology. Much of the research to be conducted with Cooperative Agreement funds will be longer term, high-risk, basic research and will be carried out in two broad areas: Advanced Pre-Combustion Clean Coal Technologies and Gas-Gas Separations. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the five member universities. These were reviewed and the selected proposals were forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed below by category, along with abstracts from their final reports.

  1. NCI Start-Up 2.0: An Evaluation Option License Program | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NCI's Start-Up Evaluation Option License minimizes barriers to entry faced by start-up companies that seek to license NIH technologies. The license encourages and supports the commercial development of early-stage technologies developed in the NIH Intramural Research Program. While the NIH has been quite flexible in structuring licenses for the benefit of start-up companies, one of the goals of the NIH Start-up License program is to further reduce the time and capital to negotiate and finalize an exclusive license agreement. | [google6f4cd5334ac394ab.html

  2. Mobile 3D television: development of core technological elements and user-centered evaluation methods toward an optimized system

    Science.gov (United States)

    Gotchev, Atanas; Smolic, Aljoscha; Jumisko-Pyykkö, Satu; Strohmeier, Dominik; Bozdagi Akar, Gozde; Merkle, Philipp; Daskalov, Nikolai

    2009-02-01

    A European consortium of six partners has been developing core technological components of a mobile 3D television system over DVB-H channel. In this overview paper, we present our current results on developing optimal methods for stereo-video content creation, coding and transmission and emphasize their significance for the power-constrained mobile platform, equipped with auto-stereoscopic display. We address the user requirements by applying modern usercentered approaches taking into account different user groups and usage contexts in contrast to the laboratory assessment methods which, though standardized, offer limited applicability to real applications. To this end, we have been aiming at developing a methodological framework for the whole system development process. One of our goals has been to further develop the user-centered approach towards experienced quality of critical system components. In this paper, we classify different research methods and technological solutions analyzing their pros and constraints. Based on this analysis we present the user-centered methodological framework being used throughout the whole development process of the system and aimed at achieving the best performance and quality appealing to the end user.

  3. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-06-30

    To enhance the measurement capability of EICs to alpha spectrometry, measurements at FIU-HCET were performed on different energy alpha sources, and response factors of ST electrets in 960-mL chamber were determined. Earlier, EIC was considered as only a charge-integrating device without spectrometric capability. This is a potentially significant development accomplished by FIU-HCET. It could appreciably lower the current cost of spectral characterization. FIU-HCET has been invited to participate in the Operating Engineers' National Hazmat program's assessment of the Mini Mitter, commercially known as the VitalSense{trademark} Telemetric Monitoring System. This evaluation is scheduled for early July 1999. Additional health and safety technology evaluations, in which FIU-HCET will also participate, are also scheduled for later in the summer. The Technology Information System (TIS), MISD, and DASD are now complete and accessible through the Internet website http://www.DandD.org/tis.

  4. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-09-30

    The Princeton Plasma Physics Laboratory (PPPL) demonstration of the diamond wire cutting technology on the surrogate of the Tokamak Fusion Test Reactor (TFTR), Figure 1, was performed from August 23-September 3, 1999. The plated diamond wire, Figure 2, was successful in cutting through all components of the TFTR surrogate including stainless steel, inconel and graphite. The demonstration tested three different void fill materials (mortar with sand, Rheocell-15, and foam) and three cooling systems (water, air, and liquid nitrogen). The optimum combination was determined to be the use of the low-density concrete void fill, Rheocell-15 with an average density of 52 lbs/ft{sup 3}, using a water coolant. However, the liquid nitrogen performed better than expected with only minor problems and was considered to be a successful demonstration of the Bluegrass Concrete Cutting, Inc. proprietary liquid-nitrogen coolant system. Data from the demonstration is being calculated and a summary of the technology demonstration will be included in the October monthly report. An ITSR will be written comparing the diamond wire saw to the plasma arc (baseline) technology. The MTR Chemical Protective Suit, a proprietary new suit from Kimberly Clark, was evaluated from 8/9/99 to 8/12/99 at Beaver, WV. This particular suit was tested on subjects performing three different tasks: climbing through a horizontal confined space, vertical confined space (pit), and loading and unloading material using a wheel barrow. Multiple test subjects performed each task for 20 minutes each. Performance of the innovative suit was compared to two commonly used types of protective clothing. Vital statistics, including body temperature and heart rate, were continuously monitored and recorded by an authorized physician. A summary of the demonstration will be included in the October monthly report. Along with the MTR Chemical Protective Suit, the VitalSense{trademark} Telemetric Monitoring System from Mini Mitter

  5. Center for Nanoscale Science and Technology

    Science.gov (United States)

    NIST Center for Nanoscale Science and Technology (Program website, free access)   Currently there is no database matching your keyword search, but the NIST Center for Nanoscale Science and Technology website may be of interest. The Center for Nanoscale Science and Technology enables science and industry by providing essential measurement methods, instrumentation, and standards to support all phases of nanotechnology development, from discovery to production.

  6. Building Technologies Research and Integration Center (BTRIC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

  7. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    2000-01-31

    The Online Measurement of Decontamination project team received a commitment for a demonstration in May from the Sacramento (California) Municipal Utility District (SMUD) Rancho Seco site. Since this site is a member of the DOE Commercial Utilities Consortium, the demonstration will fulfill the DOE and commercial technology demonstration requirements. Discussion on deployment of the Integrated Vertical and Overhead Decontamination (IVOD) System at Rancho Seco was conducted; date for deployment tentatively scheduled for early spring. Based upon fictional requirements from SRS for a shiny monitor in a high-level waste tank, FIU-HCET developed and delivered a draft slurry monitor design and draft test plan. Experiments measuring slurry settling time for SRS slurry simulant at 10 wt% have been completed on FIU-HCET'S flow loop with SRS dip. The completed design package of the test mockup for evaluating Non-Intrusive Location of Buried Items Technologies was sent to Fluor Fernald and the Operating Engineers National Hazmat Program for review. Comments are due at the end of January. Preliminary experiments to determine size distribution of aerosols generated during metal cutting were performed. A 1/4-inch-thick iron plate was cut using a plasma arc torch, and the size distribution of airborne particles was measured using a multistage impactor. Per request of DOE-Ohio, FIU-HCET participated in a weeklong value engineering study for the characterization, decontamination, and dismantlement of their critical path facility.

  8. User-centered Technologies For Blind Children

    Directory of Open Access Journals (Sweden)

    Jaime Sánchez

    2008-01-01

    Full Text Available The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathematical skills, navigation and orientation, and problem solving of blind children. Findings indicate significant improvements in learning and cognition from using audio-based tools specially tailored for the blind. That is, technologies for blind children, carefully tailored through user-centered design approaches, can make a significant contribution to cognitive development of these children. This paper contributes new insight into the design and implementation of audio-based virtual environments to facilitate learning and cognition in blind children.

  9. Search Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  10. Available Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  11. CAD/BIM Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — Supporting Better Decisions in Facility, Infrastructure, and Environment Management Access to technology tools to model structures before they are built can provide...

  12. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-05-31

    The programming and website for the advanced Technology Information System (TIS) have been completed. Over and above the LSDDP-TIS, the new system provides information on DOE's baseline technologies, technology data contained in DOE's databases, technologies assessed at FIU-HCET Technology Assessment Program (TAP), as well as links to other selected D&D sites with valuable technology information. The new name for the website is Gateway for Environmental Technology (GET). A super-vacuum type blasting system was tested for decontamination of 12-in pipe internal surfaces. The system operates on compressed air and propels grit media at high speed at wall surfaces. It is equipped with a vacuum system for collecting grit, dust, and debris. This technology was selected for further development. The electret ion chamber (EIC) system for measurement of alpha contamination on surfaces has been calibrated and is ready for demonstration and deployment. FIU-HCET is working with representatives from Fernald, Oak Ridge, Rocky Flats, and Savannah River to procure a demonstration and deployment site. Final arrangements are ongoing for the mock-up design for the glove box and tank size reduction technology assessments, including designing of support bases for tanks, a piping support system, and a mobilization plan for glove boxes and tanks from storage site to the PermaCon.

  13. CAD/BIM Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — Supporting Better Decisions in Facility, Infrastructure, and Environment ManagementAccess to technology tools to model structures before they are built can provide...

  14. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-01-31

    FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.

  15. Advanced technologies for Mission Control Centers

    Science.gov (United States)

    Dalton, John T.; Hughes, Peter M.

    1991-01-01

    Advance technologies for Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: technology needs; current technology efforts at GSFC (human-machine interface development, object oriented software development, expert systems, knowledge-based software engineering environments, and high performance VLSI telemetry systems); and test beds.

  16. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-07-31

    FIU-HCET personnel visited the Special Technologies Laboratory (STL) for discussions with the Principal Investigator (PI) of Laser Induced Fluorescence Imaging (LIFI) and for training in LIFI. Mr. Peter Gibbons, Tanks Retrieval Technology Integration Manager, visited FIU-HCET on July 20, 1999. Mr. Gibbons inspected the pipeline unplugging experimental facility at the HCET testing field. The detailed test bed construction, testing plan, and plugging material specifications were discussed.

  17. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-03-30

    A vendor was selected for the diamond wire technology demonstration scheduled for this summer at Princeton Plasma Physics Laboratory (PPPL). A team consisting of personnel from FIU-HCET, PPPL, and AEA Technology reviewed the submitted bids. FIU-HCET will contract this vendor. At the SRS Ninth ICT teleconference, the ICT team discussed the status of the following demonstrations: LRAD; x-ray, K-edge; Strippable Coatings; Thermal Spray Vitrification; Cutting/Shearing/Dismantlement/Size Reduction; and Electrets. The LRAD demo is complete, and the x-ray/K-edge, Strippable Coatings, and Electrets demos are ongoing. The Asbestos and Thermal Spray Vitrification demos require more laboratory testing. The Cutting/Shearing/Dismantlement/Size Reduction demo is undergoing procurement. Five FIU-HCET staff members took the 1S0 14000 environmental auditor training course February 22-26, 1999, given by ASC. The test plan for the Facility Dismantlement Technology Assessment is finished and ready for internal review.

  18. Techniques for evaluating optimum data center operation

    Science.gov (United States)

    Hamann, Hendrik F.; Rodriguez, Sergio Adolfo Bermudez; Wehle, Hans-Dieter

    2017-06-14

    Techniques for modeling a data center are provided. In one aspect, a method for determining data center efficiency is provided. The method includes the following steps. Target parameters for the data center are obtained. Technology pre-requisite parameters for the data center are obtained. An optimum data center efficiency is determined given the target parameters for the data center and the technology pre-requisite parameters for the data center.

  19. Savannah River Technology Center, monthly report

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This is the monthly report to detail the research currently being conducted at the Savannah River Technology Center. The areas of research are in Tritium, Seperation processes, Environmental Engineering, and Waste Management.

  20. Savannah River Technology Center monthly report

    Energy Technology Data Exchange (ETDEWEB)

    1992-10-01

    This document contains many small reports from personnel at the technology center under the umbrella topics of reactors, tritium, separations, environment, waste management, and general engineering. Progress and accomplishments are given.

  1. NASA(Field Center Based) Technology Commercialization Centers

    Science.gov (United States)

    1995-01-01

    Under the direction of the IC(sup 2) Institute, the Johnson Technology Commercialization Center has met or exceeded all planned milestones and metrics during the first two and a half years of the NTCC program. The Center has established itself as an agent for technology transfer and economic development in- the Clear Lake community, and is positioned to continue as a stand-alone operation. This report presents data on the experimental JTCC program, including all objective measures tracked over its duration. While the metrics are all positive, the data indicates a shortage of NASA technologies with strong commercial potential, barriers to the identification and transfer of technologies which may have potential, and small financial return to NASA via royalty-bearing licenses. The Center has not yet reached the goal of self-sufficiency based on rental income, and remains dependent on NASA funding. The most important issues raised by the report are the need for broader and deeper community participation in the Center, technology sourcing beyond JSC, and the form of future funding which will be appropriate.

  2. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A.Ebadian

    1999-02-28

    Search for decontamination technologies to be assessed at FIU-HCET continues. Bartlett Nuclear Inc. returned to FIU-HCET on February 15-19, 1999, to complete the demonstration of coating removal from concrete ceiling and aggressive contamination removal on uncoated concrete wall using their Robotic Climber. The design of test beds for large-scale technology demonstration of blockage locating and pipe unplugging has undergone major revision. The lab-scale test loop is also under modification. A new sampling system using isokinetic principles and consisting of thermistors, flow controller, and Wheatstone bridge will be installed on the flow loop. FIU-HCET International Coordinator attended the VII Steering Committee meeting in Lima, Peru, on February 11-12, 1999, and successfully introduced the Interactive Communication Website. Additional agenda items on the Website were proposed by the Steering Committee for upcoming committee meetings and working groups.

  3. Technologies for Learner-Centered Feedback

    Science.gov (United States)

    Costello, Jane; Crane, Daph

    2013-01-01

    As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes.…

  4. Center for Assistive Technology & Environmental Access

    Science.gov (United States)

    ... new address and college name * The Center for Assistive Technology and Environmental Access Georgia Institute of Technology (GT) College of Design 512 Means St., Suite 300, Atlanta, GA 30332-0156 (for shipping, please use 30318) U.S.A. Phone: 404-894-4960 (v/tty) ... | Privacy Agreement

  5. Join TTC! | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) offers a unique opportunity for training through the NCI TTC Fellowship program. TTC also has a unit dedicated to marketing these research opportunities and their underlying technologies to potential collaborators and licensees. | [google6f4cd5334ac394ab.html

  6. Satisloh centering technology developments past to present

    Science.gov (United States)

    Leitz, Ernst Michael; Moos, Steffen

    2015-10-01

    The centering of an optical lens is the grinding of its edge profile or contour in relationship to its optical axis. This is required to ensure that the lens vertex and radial centers are accurately positioned within an optical system. Centering influences the imaging performance and contrast of an optical system. Historically, lens centering has been a purely manual process. Along its 62 years of assembling centering machines, Satisloh introduced several technological milestones to improve the accuracy and quality of this process. During this time more than 2.500 centering machines were assembled. The development went from bell clamping and diamond grinding to Laser alignment, exchange chuckor -spindle systems, to multi axis CNC machines with integrated metrology and automatic loading systems. With the new centering machine C300, several improvements for the clamping and grinding process were introduced. These improvements include a user friendly software to support the operator, a coolant manifold and "force grinding" technology to ensure excellent grinding quality and process stability. They also include an air bearing directly driven centering spindle to provide a large working range of lenses made of all optical materials and diameters from below 10 mm to 300 mm. The clamping force can be programmed between 7 N and 1200 N to safely center lenses made of delicate materials. The smaller C50 centering machine for lenses below 50 mm diameter is available with an optional CNC loading system for automated production.

  7. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  8. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  9. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  10. Center for Coastline Security Technology, Year 3

    Science.gov (United States)

    2008-05-01

    Figure 2.6.8: Close-Up Photograph of RPUUV Tail Section. Figure 2.6.9: Force and moments applied on a hydrofoil . Figure 2.6.10: The NACA 21016... hydrofoil profile. Florida Atlantic University 4/28/08 Page 10 Center for Coastline Security Technology Year Three-Final Report Figure...as a 3D wing with a NACA 21016 hydrofoil profile (Figure 2.6.10) held by 3 cylinders (Figure 2.6.8). Center for Coastline Security Technology Year

  11. Inter-institutional decision making in the technology transfer process: Some preliminary issues in the evaluation of ORNL's High-Temperature Superconductivity Pilot Center

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, D.L.

    1989-09-01

    This report illuminates the decision-making processes affecting technology transfer at ORNL as they potentially impact upon development of high-temperature superconductors. The methodology of this report consists of an analysis of Oak Ridge National Laboratory (ORNL) documents laws, and regulations; a review of relevant literature on licensing, patents, and user center decision making; and interviews with persons directly involved in technology development and transfer at the laboratory. The process of technology development at ORNL encompasses, among other things, activities aimed at research and development (R D), technology transfer, and technology utilization. Each of these activities has officially become part of an overall laboratory mission referred to as technology development. 28 refs., 1 fig., 3 tabs.

  12. 2017 Technology Showcase | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The 2017 Technology Showcase is an inaugural, half-day event that will showcase technologies developed by the National Cancer Institute's Center for Cancer Research (CCR) and the Frederick National Laboratory for Cancer Research (FNLCR). The goal of the Showcase is to encourage startup company formation, technology licensing, and public-private collaborations. It will introduce the Frederick community to the regional technology development stakeholders, as well as highlight available resources. WHO SHOULD ATTEND: Prospective investors, established companies, educators, those looking to commercialize technologies, and all interested stakeholders. | [google6f4cd5334ac394ab.html

  13. Technologies for learner-centered feedback

    Directory of Open Access Journals (Sweden)

    Jane Costello

    2013-09-01

    Full Text Available As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes. Feedback, types of feedback, guidelines for effective learner-centered feedback, and feedback’s relationship to assessment are presented. Methods of providing feedback, for example, automated, audio scribe pens, digital audio, etc., and the related technologies are described. Technologies that allow instructors to make informed decisions about the use of various methods for feedback are discussed.

  14. Graduate Automotive Technology Education (GATE) Center

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Hodgson; David Irick

    2005-09-30

    The Graduate Automotive Technology Education (GATE) Center at the University of Tennessee, Knoxville has completed its sixth year of operation. During this period the Center has involved thirteen GATE Fellows and ten GATE Research Assistants in preparing them to contribute to advanced automotive technologies in the center's focus area: hybrid drive trains and control systems. Eighteen GATE students have graduated, and three have completed their course work requirements. Nine faculty members from three departments in the College of Engineering have been involved in the GATE Center. In addition to the impact that the Center has had on the students and faculty involved, the presence of the center has led to the acquisition of resources that probably would not have been obtained if the GATE Center had not existed. Significant industry interaction such as internships, equipment donations, and support for GATE students has been realized. The value of the total resources brought to the university (including related research contracts) exceeds $4,000,000. Problem areas are discussed in the hope that future activities may benefit from the operation of the current program.

  15. License Agreements | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Since the government cannot engage in the development, manufacture, and sale of products, the NCI Technology Transfer Center (TTC) makes its discoveries (and discoveries from nine other NIH Institutes) available to organizations that can assist in the further development and commercialization of these basic science discoveries, to convert them into public health benefits. | [google6f4cd5334ac394ab.html

  16. About TTC | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners, and helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class facilities, resources, and discoveries. Contact us to learn more. | [google6f4cd5334ac394ab.html

  17. Marshall Space Flight Center Technology Investments Overview

    Science.gov (United States)

    Tinker, Mike

    2014-01-01

    NASA is moving forward with prioritized technology investments that will support NASA's exploration and science missions, while benefiting other Government agencies and the U.S. aerospace enterprise. center dotThe plan provides the guidance for NASA's space technology investments during the next four years, within the context of a 20-year horizon center dotThis plan will help ensure that NASA develops technologies that enable its 4 goals to: 1.Sustain and extend human activities in space, 2.Explore the structure, origin, and evolution of the solar system, and search for life past and present, 3.Expand our understanding of the Earth and the universe and have a direct and measurable impact on how we work and live, and 4.Energize domestic space enterprise and extend benefits of space for the Nation.

  18. The Hydrogen Technology Center at Wyle Laboratories

    Science.gov (United States)

    Wheelock, H.; Smith, D.; Frazier, J.

    1990-10-01

    A deactivated storable propellant test area with numerous test cells, large open concrete pads of up to 65-ft length, and two enclosed metal storage buildings, has been converted into a Hydrogen Technology Center. The conversion strategy involved extensive use of modified surplus equipment, well established testing technologies, and innovative engineering to obviate long-delivery time items. Simple, high heat flux water-to-cryogen heat exchangers are used to generate ambient temperature H2 and N gas. Hydrogen-fueled combustors were designed and fabricated to power the specialized heat exchangers required to support high-temperature hydrogen experiments. The facility has operated productively and safely since October, 1988.

  19. Biological Semiconductors | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's Cancer Diagnostic Program and the Food and Drug Administration's Center for Devices and Radiological Health is seeking statements of capability or interest from parties interested in collaborative research to further develop, evaluate, or commercialize biological semiconductors as diagnostic sensors.

  20. Mission & Role | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The NCI TTC serves as the focal point for implementing the Federal Technology Transfer Act to utilize patents as incentive for commercial development of technologies and to establish research collaborations and licensing among academia, federal laboratories, non-profit organizations, and industry. The TTC supports technology development activities for the National Cancer Institute and nine other NIH Institutes and Centers. TTC staff negotiate co-development agreements and licenses with universities, non-profit organizations, and pharmaceutical and biotechnology companies to ensure compliance with Federal statutes, regulations and the policies of the National Institutes of Health. TTC also reviews employee invention reports and makes recommendations concerning filing of domestic and foreign patent applications. | [google6f4cd5334ac394ab.html

  1. Evaluation Of Investments In Science, Technology And Innovation: Applying Scientific and Technical Human Capital Framework For Assessment of Doctoral Students In Cooperative Research Centers

    Science.gov (United States)

    Leonchuk, Olena

    This dissertation builds on an alternative framework for evaluation of science, technology and innovation (STI) outcomes - the scientific & technical (S&T) human capital which was developed by Bozeman, Dietz and Gaughan (2001). At its core, this framework looks beyond simple economic and publication metrics and instead focuses on scientists' social capital. The premise of the framework is that science does not happen in vacuum and that resources embedded in scientists' social networks are important and enduring outcomes of the scientific process that were not being captured by traditional metrics. This dissertation examines social capital of science and engineering (S&E) graduate students, an underrepresented group of stakeholders in STI evaluations. S&E graduate students are unique for several reasons. In comparison with students in other disciplines, S&E graduate students have a greater proportion of international students; are widely employed by industry in numbers exceeded only by business graduates. And, most importantly, S&E graduates pursue education in fields that contribute the most to the US innovation capacity. This dissertation introduces a multidimensional measure of social capital based on the network theory of social capital proposed by Nan Lin (1999). According to Lin, social capital consists of three components: availability of resources and social embeddedness in one's network and mobilization of these resources. In order to address these elements, the dissertation employs two studies that focus on different components of social capital. Study 1 looks at accessibility of resources in students' social networks and whether students would be likely to mobilize them by using a proxy measure of norms and values about collaborations. The study also addresses the effect of social capital on students' experiences and outcomes, specifically, on their satisfaction and perceived career preparedness. The researcher investigates the mechanisms that explain

  2. Overview of Stirling Technology Research at NASA Glenn Research Center

    Science.gov (United States)

    Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

    2016-01-01

    Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

  3. Federally Sponsored Multidisciplinary Research Centers: Learning, Evaluation, and Vicious Circles

    Science.gov (United States)

    Youtie, Jan; Corley, Elizabeth A.

    2011-01-01

    Despite the increasing investment in multi-year federally funded science and technology centers in universities, there are few studies of how these centers engage in learning and change based on information submitted from various agents in the oversight and evaluation process. One challenge is how to manage and respond to this evaluative…

  4. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  5. Mobile Health Technology Evaluation

    Science.gov (United States)

    Kumar, Santosh; Nilsen, Wendy J.; Abernethy, Amy; Atienza, Audie; Patrick, Kevin; Pavel, Misha; Riley, William T.; Shar, Albert; Spring, Bonnie; Spruijt-Metz, Donna; Hedeker, Donald; Honavar, Vasant; Kravitz, Richard; Lefebvre, R. Craig; Mohr, David C.; Murphy, Susan A.; Quinn, Charlene; Shusterman, Vladimir; Swendeman, Dallas

    2013-01-01

    Creative use of new mobile and wearable health information and sensing technologies (mHealth) has the potential to reduce the cost of health care and improve well-being in numerous ways. These applications are being developed in a variety of domains, but rigorous research is needed to examine the potential, as well as the challenges, of utilizing mobile technologies to improve health outcomes. Currently, evidence is sparse for the efficacy of mHealth. Although these technologies may be appealing and seemingly innocuous, research is needed to assess when, where, and for whom mHealth devices, apps, and systems are efficacious. In order to outline an approach to evidence generation in the field of mHealth that would ensure research is conducted on a rigorous empirical and theoretic foundation, on August 16, 2011, researchers gathered for the mHealth Evidence Workshop at NIH. The current paper presents the results of the workshop. Although the discussions at the meeting were cross-cutting, the areas covered can be categorized broadly into three areas: (1) evaluating assessments; (2) evaluating interventions; and, (3) reshaping evidence generation using mHealth. This paper brings these concepts together to describe current evaluation standards, future possibilities and set a grand goal for the emerging field of mHealth research. PMID:23867031

  6. CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan; Hull, Christopher

    2014-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

  7. MINERGY CORPORATION GLASS FURNACE TECHNOLOGY EVALUATION: INNOVATION TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report presents performance and economic data for a U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program demonstration of the Minergy Corporation (Minergy) Glass Furnace Technology (GFT). The demonstration evaluated the techno...

  8. Tiger Team Assessment, Energy Technology Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

  9. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  10. Scientific Data Management Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Vouk, Mladen A.

    2013-01-15

    Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Fortunately, the data management problems encountered by most scientific domains are common enough to be addressed through shared technology solutions. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation, analysis, or visualization engine. These processes are complicated by the fact that scientific data are structured differently for specific application domains, and are stored in specialized file formats. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Specialized feature discovery and statistical analysis techniques are needed before the data can be understood or visualized. Furthermore, interactive analysis requires techniques for efficiently selecting subsets of the data. Finally, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration. The SDM center was established under the SciDAC program to address these issues. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced

  11. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  12. Center for Drug Evaluation and Research

    Data.gov (United States)

    Federal Laboratory Consortium — The Center for Drug Evaluation and Research(CDER) performs an essential public health task by making sure that safe and effective drugs are available to improve the...

  13. Center for Global Health announces grants to support portable technologies

    Science.gov (United States)

    NCI's Center for Global Health announced grants that will support the development and validation of low-cost, portable technologies. These technologies have the potential to improve early detection, diagnosis, and non-invasive or minimally invasive treatm

  14. Evaluative conditioning of food technologies

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2015-01-01

    attitudes toward food technologies. The present study tests how evaluative conditioning can affect consumer acceptance of new food technologies. Furthermore, authors investigate whether evaluative conditioning is resistant to extinction after a two-month period and whether the evaluative conditioning effect......Consumer attitudes play an important role in the acceptance of new technologies. The success of food innovations depends on understanding how consumers form and change attitudes toward food technologies. Earlier post hoc explanations suggest that evaluative conditioning can change consumer...... prevails in a product-related context. Within an evaluative conditioning paradigm including between-subjects control groups in addition to standard within-subjects control conditions, participants were presented with three food technologies (conventional, enzyme, and genetic technology) paired...

  15. Armstrong Flight Research Center Research Technology and Engineering Report 2015

    Science.gov (United States)

    Voracek, David F.

    2016-01-01

    I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

  16. Applied technology center business plan and market survey

    Science.gov (United States)

    Hodgin, Robert F.; Marchesini, Roberto

    1990-01-01

    Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

  17. PCP IMMUMOASSAY TECHNOLOGIES - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Three enzyme-linked immunosorbent assay technologies for pentachlorophenol (PCP) testing in soil and water were evaluated. Penta RISc Test Systems (formerly ENSYS, Inc.), EnviroGard™ PCP Immunoassay Test Kit (Millipore Corp.), and Pentachlorophenol RaPID Assay (formerly Ohmicron ...

  18. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-11-15

    The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (a) Solid-solid separation (b) Solid-liquid separation (c) Chemical/Biological Extraction (d) Modeling and Control, and (e) Environmental Control. Distribution of funds is being handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. The first of these solicitations, referred to as the CAST II-Round 1 RFP, was issued on October 28, 2002. Thirty-eight proposals were received by the December 10, 2002 deadline for this RFP-eleven (11) Solid-Solid Separation, seven (7) Solid-Liquid Separation, ten (10) Chemical/Biological Extraction, six (6) Modeling & Control and four (4) Environmental Control. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. This process took some 7 months to complete but 17 projects (one joint) were in place at the constituent universities (three at Virginia Tech, two at West Virginia University, three at University of

  19. Alternative treatment technology information center computer database system

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, D. [Environmental Protection Agency, Edison, NJ (United States)

    1995-10-01

    The Alternative Treatment Technology Information Center (ATTIC) computer database system was developed pursuant to the 1986 Superfund law amendments. It provides up-to-date information on innovative treatment technologies to clean up hazardous waste sites. ATTIC v2.0 provides access to several independent databases as well as a mechanism for retrieving full-text documents of key literature. It can be accessed with a personal computer and modem 24 hours a day, and there are no user fees. ATTIC provides {open_quotes}one-stop shopping{close_quotes} for information on alternative treatment options by accessing several databases: (1) treatment technology database; this contains abstracts from the literature on all types of treatment technologies, including biological, chemical, physical, and thermal methods. The best literature as viewed by experts is highlighted. (2) treatability study database; this provides performance information on technologies to remove contaminants from wastewaters and soils. It is derived from treatability studies. This database is available through ATTIC or separately as a disk that can be mailed to you. (3) underground storage tank database; this presents information on underground storage tank corrective actions, surface spills, emergency response, and remedial actions. (4) oil/chemical spill database; this provides abstracts on treatment and disposal of spilled oil and chemicals. In addition to these separate databases, ATTIC allows immediate access to other disk-based systems such as the Vendor Information System for Innovative Treatment Technologies (VISITT) and the Bioremediation in the Field Search System (BFSS). The user may download these programs to their own PC via a high-speed modem. Also via modem, users are able to download entire documents through the ATTIC system. Currently, about fifty publications are available, including Superfund Innovative Technology Evaluation (SITE) program documents.

  20. Emerging Technologies: Applications and Implications for School Library Media Centers.

    Science.gov (United States)

    Craver, Kathleen W.

    This paper examines emerging information technologies and their implications for school library media centers. Because of the fluctuating situation regarding new innovations, only emerging technologies that specialists believe will occur within the next 5 to 10 years are discussed. For each technology mentioned, a brief description is given…

  1. Inauguration of the Stoll Fashion & Technology Center

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ On April 1st 2009 the new Stoll Fashion & Technology showroom will be opened in New York.The new showroom is situated in the heart of the Garment District of Manhattan,New York and will present the opportunity to gain hands-on experience to the services of the Stoll Fashion & Technology world.The highlight of the inauguration at the 15.000 square feet showroom will be the introduction to the reinvented service approach as well as innovative projects under the Stoll Fashion & Technology Company.

  2. Marshall Space Flight Center ECLSS technology activities

    Science.gov (United States)

    Wieland, Paul

    1990-01-01

    Viewgraphs on Environmental Control and Life Support System (ECLSS) technology activities are presented. Topics covered include: analytical development; ECLSS modeling approach; example of water reclamation modeling needs; and hardware development and testing.

  3. Standoff Detection Technology Evaluation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Standoff Detection Technology Evaluation facility is the only one of its kind in the country and allows researchers to release a known amount of material while...

  4. Thermal Desorption/Ultraviolet Photolysis Process Technology Research, Test, and Evaluation Performed at the Naval Construction Battalion Center, Gulfport, Mississippi, for the USAF Installation Restoration Program. Volume 2

    Science.gov (United States)

    1987-12-01

    packed in ice. Sampling of vent gas and off- gases from the two thermal desorption technologies will be performie using procedures and techniques...solvent used in it. wash with hot voat Cenaslunug detergent.. inse with copioua aMunts of tap water and severa2 portioc of distilled voter. Drain d4y

  5. Second leader named at Center for Geospatial Information Technology

    OpenAIRE

    Trulove, Susan

    2006-01-01

    Stephen Prisley of Blacksburg, associate professor of forestry in the College of Natural Resources at Virginia Tech, will become the director of the university's Center for Geospatial Information Technology (CGIT) as of May 15.

  6. Usability evaluation of centered time cartograms

    Science.gov (United States)

    Ullah, Rehmat; Mengistu, Eskedar Zelalem; van Elzakker, C. P. J. M.; Kraak, Menno-Jan

    2016-06-01

    A time cartogram visualizes travelling-times between locations. It replaces the geographic distance by time distance and distorts the underlyingmap accordingly. By distorting themap, time cartogramsmay give a more intuitive and clear picture of travelling-times. The distortion of the map, however, can make time cartograms harder to recognize and use. Although cartograms are becoming widespread in use, very little is known about their usability. This study focuses on the usability of centered time cartograms: time cartograms that visualize travellingtimes from a fixed starting location to other destinations in a region. We created several centered time cartograms to answer spatio-temporal questions related to the Dutch railway network. Two experiments were performed: a laboratory test and an online survey. In the laboratory test, we used eye-tracking, thinking aloud, and video-recording to compare four different designs of centered time cartograms to find out which one (or combination) of these performs better in answering spatiotemporal questions and thus, to establish a favorable design strategy for these cartograms. In the online survey, centered time cartograms were evaluated against a geographic and schematic map for accuracy, response time, and preference. The first experiment suggested that among various designs, the centered time cartogram with emphasized railroads is the most preferred design and the centered time cartogram without railroads is the least preferred. The second experiment indicated that overall, centered time cartograms perform better than the two other solutions in performing spatio-temporal tasks, particularly when the task has a dominant time-related component.

  7. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  8. Corrosion evaluation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Uh Chul; Han, Jeong Ho; Nho, Kye Ho; Lee, Eun Hee; Kim, Hong Pyo; Hwang, Seong Sik; Lee, Deok Hyun; Hur, Do Haeng; Kim, Kyung Mo

    1997-09-01

    A multifrequency ACPD system was assembled which can measure very small crack. Stress corrosion cracking test system with SSRT operating high temperature was installed. Stress corrosion cracking test of newly developed alloy 600 and existing alloy 600 was carried out in steam atmosphere of 400 deg C. No crack was observed in both materials within a test period of 2,000 hrs. Corrosion fatigue test system operating at high temperature was installed in which fatigue crack was measured by CDPD. Lead enhanced the SCC of the Alloy 600 in high temperature water, had a tendency to modify a cracking morphology from intergranular to transgranular. Pit initiation preferentially occurred at Ti-rich carbide. Resistance to pit initiation decreased with increasing temperature up to 300 deg C. Test loop for erosion corrosion was designed and fabricated. Thin layer activation technique was very effective in measuring erosion corrosion. Erosion corrosion of a part of secondary side pipe was evaluated by the Check Family Codes of EPRI. Calculated values of pipe thickness by Check Family Codes coincided with the pipe thickness measured by UT with an error of {+-} 20%. Literature review on turbine failure showed that failure usually occurred in low pressure turbine rotor disc and causes of failure are stress corrosion cracking and corrosion fatigue. (author). 12 refs., 20 tabs., 77 figs.

  9. Bioinformatics and Computational Core Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — SERVICES PROVIDED BY THE COMPUTER CORE FACILITY Evaluation, purchase, set up, and maintenance of the computer hardware and network for the 170 users in the research...

  10. Industrial Assessment Center Program Impact Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Martin, M.A.

    2000-01-26

    This report presents the results of an evaluation of the U.S. Department of Energy's Industrial Assessment Center (IAC) Program. The purpose of this program is to conduct energy, waste, and productivity assessments for small to medium-sized industrial firms. Assessments are conducted by 30 university-based industrial assessment centers. The purpose of this project was to evaluate energy and cost savings attributable to the assessments, the trained alumni, and the Websites sponsored by this program. How IAC assessments, alumni, and Web-based information may influence industrial energy efficiency decision making was also studied. It is concluded that appreciable energy and cost savings may be attributed to the IAC Program and that the IAC Program has resulted in more active and improved energy-efficiency decision making by industrial firms.

  11. Investigating "The Coolest School in America": How Technology Is Used in a Learner-Centered School

    Science.gov (United States)

    Aslan, Sinem; Reigeluth, Charles M.

    2016-01-01

    Reigeluth et al. ("Educ Technol" 48(6):32-39, 2008) proposed major and secondary functions for educational technology systems for the learner-centered paradigm of education. However, the functions proposed should be formatively evaluated and revised using a variety of cases to develop a better understanding of how technology can support…

  12. 2017 Technology Showcase Presentations | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Presentations from the 2017 Technology Showcase by NIH Intramural Research Program scientists held at Frederick National Laboratories for Cancer Research on June 7, 2017. | [google6f4cd5334ac394ab.html

  13. Marshall Space Flight Center Research and Technology Report 2016

    Science.gov (United States)

    Tinker, M. L.; Abney, M. B. (Compiler); Reynolds, D. W. (Compiler); Morris, H. C. (Compiler)

    2017-01-01

    Marshall Space Flight Center is essential to human space exploration and our work is a catalyst for ongoing technological development. As we address the challenges facing human deep space exploration, we advance new technologies and applications here on Earth, expand scientific knowledge and discovery, create new economic opportunities, and continue to lead global space exploration.

  14. The Advanced Technology Environmental Education Center Summer Fellows Institute.

    Science.gov (United States)

    Depken, Diane E.; Zeman, Catherine L.; Lensch, Ellen Kabat; Brown, Edward J.

    2002-01-01

    Describes the background, activities, and outcomes of the Advanced Technology Environmental Education Center (ATEEC) and its Summer Fellows Institutes as a model for disciplinary and cross-disciplinary infusion of environmental science and technology content, curriculum, and methods into the classroom. Presents experiences, themes, and activities…

  15. SciDAC Visualization and Analytics Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Joy, Kenneth I. [Univ. of California, Davis, CA (United States)

    2014-09-14

    This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an "information big bang," which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies.

  16. Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

  17. Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

  18. 77 FR 43131 - Designation of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry...

    Science.gov (United States)

    2012-07-23

    ... Designation of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries (PCI... of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries (PCI... determined that the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries...

  19. 77 FR 43368 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

    Science.gov (United States)

    2012-07-24

    ... Employment and Training Administration Navistar Truck Development and Technology Center, a Subsidiary of... October 20, 2011, applicable to workers of Navistar International Truck Development and Technology Center... Truck Development and Technology Center, a Subsidiary of Navistar International Corporation,...

  20. The potential of RFID technology in Blood Center processes.

    Science.gov (United States)

    Kebo, V; Klement, P; Cermáková, Z; Gottfried, J; Sommerová, M; Palecek, A

    2010-01-01

    Current RFID technology deployment is limited by safety, procedural and physical limitations in healthcare field. It is important to define and ensure safe operation of technologies without actual deployment in real operation. Potential problems could arise due to the consequences of technical and physical characteristics of RFID technology and its improper location. This article deals with manipulation of blood products and the definition of suitable places for radio identification. Each suitable place must undergo laboratory experiments and tests. The results can provide a convenient base for defining efficient and safe deployment of RFID technology in Blood Centers with substantial financial savings for Czech healthcare.

  1. Sustainable Technology Research and Demonstration Center for Earth Structures

    Directory of Open Access Journals (Sweden)

    Judy Ueda

    2012-10-01

    Full Text Available This is a discussion paper that the authors presented at the International Workshop on Rammed Earth Materials and Sustainable Structures and Hakka Tulou Forum 2011: Structures of Sustainability, 28–31 October 2011, Xiamen University, China. A Sustainable Technology Research and Demonstration Center for Earth Structures is proposed to study, preserve, advance, promote, and implement rammed earth structures. The Center concept including the objectives, scope of activities and benefits of the proposed center are outlined. The Center for Alternative Technology in Wales, UK has been examined as a good base model along with a few successful environmental sustainability initiatives in China. The funding options to establish the proposed center have been discussed. The breadth of activities ultimately depends on funding capability. It is believed that the proposed center development will require significant government support at the initial stage but once corporate sponsorships are in place, the proposed center will potentially become self-supporting. The strategies, for the establishment of the proposed center are also addressed.

  2. GENERAL ENVIRONMENTAL CORPORATION; CURE ELECTROCOAGULATION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The CURE electrocoagulation technology was demonstrated under the Superfund Innovative Technology Evaluation (SITE) program at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS), where water from the solar evaporation ponds (SEPs) was contaminat...

  3. TECHNOLOGY EVALUATION REPORT CEREX ENVIRONMENTAL SERVICES UV HOUND POINT SAMPLE AIR MONITOR

    Science.gov (United States)

    The USEPA's National Homeland Security Research Center (NHSRC) Technology Testing and Evaluation Program (TTEP) is carrying out performance tests on homeland security technologies. Under TTEP, Battelle evaluated the performance of the Cerex UV Hound point sample air monitor in de...

  4. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  5. SAVANNAH RIVER TECHNOLOGY CENTER MONTHLY REPORT AUGUST 1992

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, J.M.

    1999-06-21

    'This monthly report summarizes Programs and Accomplishments of the Savannah River Technology Center in support of activities at the Savannah River Site. The following categories are addressed: Reactor, Tritium, Separations, Environmental, Waste Management, General, and Items of Interest.'

  6. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  7. Sino-Swiss center for cassava technology launched in Shanghai

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Under the joint sponsorship of the Shanghai Institutes for Biological Sciences (SIBS) and Swiss Federal Institute of Technology (ETH Zurich), the Shanghai Center for Cassava Biotechnology (SCCB) has been established at the Shanghai Institute of Plant Physiology and Ecology(SIPE), SIBS.

  8. User-centered design and interactive health technologies for patients.

    Science.gov (United States)

    De Vito Dabbs, Annette; Myers, Brad A; Mc Curry, Kenneth R; Dunbar-Jacob, Jacqueline; Hawkins, Robert P; Begey, Alex; Dew, Mary Amanda

    2009-01-01

    Despite recommendations that patients be involved in the design and testing of health technologies, few reports describe how to involve patients in systematic and meaningful ways to ensure that applications are customized to meet their needs. User-centered design is an approach that involves end users throughout the development process so that technologies support tasks, are easy to operate, and are of value to users. In this article, we provide an overview of user-centered design and use the development of Pocket Personal Assistant for Tracking Health (Pocket PATH) to illustrate how these principles and techniques were applied to involve patients in the development of this interactive health technology. Involving patient-users in the design and testing ensured functionality and usability, therefore increasing the likelihood of promoting the intended health outcomes.

  9. 13 CFR 306.7 - Performance evaluations of University Centers.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Performance evaluations of... Development Program § 306.7 Performance evaluations of University Centers. (a) EDA will: (1) Evaluate each... evaluation period. (b) The performance evaluation will determine in part whether a University Center...

  10. A Report on the Technological Enhancements Project Evaluation: Deepening Early Learning Experiences through Technology

    Science.gov (United States)

    Hupert, Naomi; Cervantes, Francisco; DeGroof, Emily

    2010-01-01

    As part of the "Ready to Learn" Initiative, Education Development Center, Inc. (EDC), was charged with addressing the evaluation of Technological Enhancements for the outreach efforts of three producers: Out of the Blue's Super WHY! Technology Add-On; Sesame Workshop's The Electric Company School's Initiative Curriculum; and WordWorld's eBook…

  11. Renal Cancer Biomarkers | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's Laboratory of Proteomics and Analytical Technologies is seeking statements of capability or interest from parties interested in collaborative research to further develop, evaluate, or commercialize diagnostic, therapeutic and prognostic cancer biomarkers from clinical specimens.

  12. 76 FR 30696 - Technology Evaluation Process

    Science.gov (United States)

    2011-05-26

    .... Department of Energy, Building Technologies Program, Mailstop EE-2J, Revisions to Energy Efficiency... Energy Efficiency and ] Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue... of Energy Efficiency and Renewable Energy Technology Evaluation Process AGENCY: Office of...

  13. 76 FR 11498 - Submission for OMB Review; Comment Request; Generic Submission of Technology Transfer Center (TTC...

    Science.gov (United States)

    2011-03-02

    ... Submission of Technology Transfer Center (TTC) External Customer Satisfaction Surveys (NCI) SUMMARY: Under... control number. Proposed Collection: Title: Generic Submission of Technology Transfer Center (TTC... collaborations and alliances with the NIH. The needs of external technology transfer customers and stakeholders...

  14. SciDAC visualization and analytics center for enabling technology

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E Wes [Computing Sciences Division, Lawrence Berkeley National Laboratory, The University of California, Berkeley, CA 94720-8139 (United States); Johnson, Chris [Scientific Computing and Imaging Institute, University of Utah, 72 S. Central Campus Drive, Salt Lake City, UT 84112 (United States); Joy, Ken [Institute for Data Analysis and Visualization, University of California, One Shields Avenue, Davis, CA 95616-8562 (United States); Ahern, Sean [National Center for Computational Sciences, Oak Ridge National Laboratory, One Bethel Valley Road, PO Box 2008 MS-6016, Oak Ridge, TN 37831 (United States); Pascucci, Valerio [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Childs, Hank [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Cohen, Jonathan; Duchaineau, Mark [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Hamann, Bernd [Institute for Data Analysis and Visualization, University of California, One Shields Avenue, Davis, CA 95616-8562 (United States); Hansen, Charles; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier [Scientific Computing and Imaging Institute, University of Utah, 72 S. Central Campus Drive, Salt Lake City, UT 84112 (United States); Laney, Dan [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Lindstrom, Peter [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Meredith, Jeremy; Ostrouchov, George [National Center for Computational Sciences, Oak Ridge National Laboratory, One Bethel Valley Road, PO Box 2008 MS-6016, Oak Ridge, TN 37831 (United States)

    2007-07-15

    The Visualization and Analytics Center for Enabling Technologies (VACET) focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang,' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision of VACET is to adapt, extend, create when necessary, and deploy visual data analysis solutions that are responsive to the needs of DOE's computational and experimental scientists. Our center is engineered to be directly responsive to those needs and to deliver solutions for use in DOE's large open computing facilities. The research and development directly target data understanding problems provided by our scientific application stakeholders. VACET draws from a diverse set of visualization technology ranging from production quality applications and application frameworks to state-of-the-art algorithms for visualization, analysis, analytics, data manipulation, and data management.

  15. Center for Renewable Energy and Alternative Transportation Technologies (CREATT)

    Energy Technology Data Exchange (ETDEWEB)

    Mackin, Thomas

    2012-06-30

    The Center for Renewable Energy and Alternative Transportation Technologies (CREATT) was established to advance the state of the art in knowledge and education on critical technologies that support a renewable energy future. Our research and education efforts have focused on alternative energy systems, energy storage systems, and research on battery and hybrid energy storage systems.This report details the Center's progress in the following specific areas: Development of a battery laboratory; Development of a demonstration system for compressed air energy storage; Development of electric propulsion test systems; Battery storage systems; Thermal management of battery packs; and Construction of a micro-grid to support real-world performance monitoring of a renewable energy system.

  16. Establishment of the Center for Biomedical Technology Innovation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-12-15

    The report discussed the following topics: (1) Orthopedic Devices; (2) Hybrid Vector and Method Resulting in Protein Overproduction by Eukaryotic Cells; (3) Surgical Simulator; (4) CBTI (Center for Biomedical Technology Innovation) as an Incubator for Start-up Companies; (5) Voice-activated, computer-assisted surgical robotics; (6) Through transmission ultrasonic 3-D holography for diagnostic imaging; (7) CBTI's Scibermed{trademark} Virtual Institute (SVI); and (8) Laser Oxygenation Tomography.

  17. Career and Technology Center Honors Julie Hartman | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer On May 7, Julie Hartman was honored by the Frederick County Career and Technology Center (CTC) for her support of the CTC’s Biomedical Sciences Program. As an education program specialist for Outreach and Special Programs at NCI at Frederick, Hartman is responsible for NCI at Frederick’s participation in the program, which is designed to offer Frederick County high school students hands-on, practical laboratory experience beyond the typical classroom setting. 

  18. ESTABLISHMENT OF THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-07-01

    Technical Progress Report describes progress made on the eight sub-projects awarded in the first year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of activity only.

  19. Establishment of the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Final Technical Report covers the eight sub-projects awarded in the first year and the five projects awarded in the second year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  20. Center for BioBased Binders and Pollution Reduction Technology

    Energy Technology Data Exchange (ETDEWEB)

    Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

    2013-07-01

    Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

  1. Publications in academic medical centers: technology-facilitated culture clash.

    Science.gov (United States)

    Berner, Eta S

    2014-05-01

    Academic culture has a set of norms, expectations, and values that are sometimes tacit and sometimes very explicit. In medical school and other health professions educational settings, probably the most common norm includes placing a high value on peer-reviewed research publications, which are seen as the major evidence of scholarly productivity. Other features of academic culture include encouraging junior faculty and graduate students to share their research results at professional conferences and lecturing with slides as a major way to convey information. Major values that faculty share with journal editors include responsible conduct of research and proper attribution of others' words and ideas. Medical school faculty also value technology and are often quick to embrace technological advances that can assist them in their teaching and research. This article addresses the effects of technology on three aspects of academic culture: education, presentations at professional meetings, and research publications.The technologies discussed include online instruction, dissemination of conference proceedings on the Internet, plagiarism-detection software, and new technologies deployed by the National Center for Biotechnology Information, the home of PubMed. The author describes how the ease of deploying new technologies without faculty changing their norms and behavior in the areas of teaching and research can lead to conflicts of values among key stakeholders in the academic medical community, including faculty, journal editors, and professional associations. The implications of these conflicts and strategies for managing them are discussed.

  2. Robotic Technology Efforts at the NASA/Johnson Space Center

    Science.gov (United States)

    Diftler, Ron

    2017-01-01

    The NASA/Johnson Space Center has been developing robotic systems in support of space exploration for more than two decades. The goal of the Center's Robotic Systems Technology Branch is to design and build hardware and software to assist astronauts in performing their mission. These systems include: rovers, humanoid robots, inspection devices and wearable robotics. Inspection systems provide external views of space vehicles to search for surface damage and also maneuver inside restricted areas to verify proper connections. New concepts in human and robotic rovers offer solutions for navigating difficult terrain expected in future planetary missions. An important objective for humanoid robots is to relieve the crew of "dull, dirty or dangerous" tasks allowing them more time to perform their important science and exploration missions. Wearable robotics one of the Center's newest development areas can provide crew with low mass exercise capability and also augment an astronaut's strength while wearing a space suit. This presentation will describe the robotic technology and prototypes developed at the Johnson Space Center that are the basis for future flight systems. An overview of inspection robots will show their operation on the ground and in-orbit. Rovers with independent wheel modules, crab steering, and active suspension are able to climb over large obstacles, and nimbly maneuver around others. Humanoid robots, including the First Humanoid Robot in Space: Robonaut 2, demonstrate capabilities that will lead to robotic caretakers for human habitats in space, and on Mars. The Center's Wearable Robotics Lab supports work in assistive and sensing devices, including exoskeletons, force measuring shoes, and grasp assist gloves.

  3. Center for Biologics Evaluation and Research (CBER)

    Data.gov (United States)

    Federal Laboratory Consortium — CBER is the Center within FDA that regulates biological products for human use under applicable federal laws, including the Public Health Service Act and the Federal...

  4. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  5. NASA Johnson Space Center SBIR STTR Program Technology Innovations

    Science.gov (United States)

    Krishen, Kumar

    2007-01-01

    The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

  6. Mouse Xenograft Model for Mesothelioma | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute is seeking parties interested in collaborative research to co-develop, evaluate, or commercialize a new mouse model for monoclonal antibodies and immunoconjugates that target malignant mesotheliomas. Applications of the technology include models for screening compounds as potential therapeutics for mesothelioma and for studying the pathology of mesothelioma.

  7. The 1991 research and technology report, Goddard Space Flight Center

    Science.gov (United States)

    Soffen, Gerald (Editor); Ottenstein, Howard (Editor); Montgomery, Harry (Editor); Truszkowski, Walter (Editor); Frost, Kenneth (Editor); Sullivan, Walter (Editor); Boyle, Charles (Editor)

    1991-01-01

    The 1991 Research and Technology Report for Goddard Space Flight Center is presented. Research covered areas such as (1) earth sciences including upper atmosphere, lower atmosphere, oceans, hydrology, and global studies; (2) space sciences including solar studies, planetary studies, Astro-1, gamma ray investigations, and astrophysics; (3) flight projects; (4) engineering including robotics, mechanical engineering, electronics, imaging and optics, thermal and cryogenic studies, and balloons; and (5) ground systems, networks, and communications including data and networks, TDRSS, mission planning and scheduling, and software development and test.

  8. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

  9. The Savannah River Technology Center environmental monitoring field test platform

    Energy Technology Data Exchange (ETDEWEB)

    Rossabi, J.

    1993-03-05

    Nearly all industrial facilities have been responsible for introducing synthetic chemicals into the environment. The Savannah River Site is no exception. Several areas at the site have been contaminated by chlorinated volatile organic chemicals. Because of the persistence and refractory nature of these contaminants, a complete clean up of the site will take many years. A major focus of the mission of the Environmental Sciences Section of the Savannah River Technology Center is to develop better, faster, and less expensive methods for characterizing, monitoring, and remediating the subsurface. These new methods can then be applied directly at the Savannah River Site and at other contaminated areas in the United States and throughout the world. The Environmental Sciences Section has hosted field testing of many different monitoring technologies over the past two years primarily as a result of the Integrated Demonstration Program sponsored by the Department of Energy`s Office of Technology Development. This paper provides an overview of some of the technologies that have been demonstrated at the site and briefly discusses the applicability of these techniques.

  10. Scientific and educational center "space systems and technology"

    Science.gov (United States)

    Kovalev, I. V.; Loginov, Y. Y.; Zelenkov, P. V.

    2015-10-01

    The issues of engineers training in the aerospace university on the base of Scientific and Educational Center "Space Systems and Technology" are discussed. In order to improve the quality of education in the Siberian State Aerospace University the research work of students, as well as the practice- oriented training of engineers are introduced in the educational process. It was made possible as a result of joint efforts of university with research institutes of the Russian Academy of Science and industrial enterprises. The university experience in this area promotes the development of a new methods and forms of educational activities, including the project-oriented learning technologies, identifying promising areas of specialization and training of highly skilled engineers for aerospace industry and other institutions. It also allows you to coordinate the work of departments and other units of the university to provide the educational process in workshops and departments of the industrial enterprises in accordance with the needs of the target training. Within the framework of scientific and education center the students perform researches, diploma works and master's theses; the postgraduates are trained in advanced scientific and technical areas of enterprise development.

  11. Research and technology, fiscal year 1986, Marshall Space Flight Center

    Science.gov (United States)

    1986-01-01

    The Marshall Space Flight Center is continuing its vigorous efforts in space-related research and technology. Extensive activities in advanced studies have led to the approval of the Orbital Maneuvering Vehicle as a new start. Significant progress was made in definition studies of liquid rocket engine systems for future space transportation needs and the conceptualization of advanced laucnch vehicles. The space systems definition studies have brought the Advanced X-ray Astrophysics Facility and Gravity Probe-B to a high degree of maturity. Both are ready for project implementation. Also discussed include significant advances in low gravity sciences, solar terrestrial physics, high energy astrophysics, atmospheric sciences, propulsion systems, and on the critical element of the Space Shuttle Main Engine in particular. The goals of improving the productivity of high-cost repetitive operations on reusable transportation systems, and extending the useful life of such systems are examined. The research and technology highlighted provides a foundation for progress on the Hubble Space Telescope, the Space Station, all elements of the Space Transportation System, and the many other projects assigned to this Center.

  12. Technology Games: Using Wittgenstein for Understanding and Evaluating Technology.

    Science.gov (United States)

    Coeckelbergh, Mark

    2017-08-15

    In the philosophy of technology after the empirical turn, little attention has been paid to language and its relation to technology. In this programmatic and explorative paper, it is proposed to use the later Wittgenstein, not only to pay more attention to language use in philosophy of technology, but also to rethink technology itself-at least technology in its aspect of tool, technology-in-use. This is done by outlining a working account of Wittgenstein's view of language (as articulated mainly in the Investigations) and by then applying that account to technology-turning around Wittgenstein's metaphor of the toolbox. Using Wittgenstein's concepts of language games and form of life and coining the term 'technology games', the paper proposes and argues for a use-oriented, holistic, transcendental, social, and historical approach to technology which is empirically but also normatively sensitive, and which takes into account implicit knowledge and know-how. It gives examples of interaction with social robots to support the relevance of this project for understanding and evaluating today's technologies, makes comparisons with authors in philosophy of technology such as Winner and Ihde, and sketches the contours of a phenomenology and hermeneutics of technology use that may help us to understand but also to gain a more critical relation to specific uses of concrete technologies in everyday contexts. Ultimately, given the holism argued for, it also promises a more critical relation to the games and forms of life technologies are embedded in-to the ways we do things.

  13. Evaluation of the cleaner technology programme

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou; Jørgensen, Ulrik

    The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination of the dissemi...... of the dissemination of cleaner technology solutions achieved in six industrial branches, and on the overall programme and its effects, in particular environmental impacts, but also results in the form of employment, environmental export, strenghtening of Danish know-how etc.......The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination...

  14. Developing and Evaluating Collaborative Technologies

    Science.gov (United States)

    2005-11-01

    undertaking. This paper considers the topic of assessing collaborative technologies in the context of military logistics . A historical view of collaborative...research in military logistics is provided, as well as a discussion of current research aimed at developing a framework for assessing collaborative technologies.

  15. GRACE BIOREMEDIATION TECHNOLOGIES - DARAMEND™ BIOREMEDIATION TECHNOLOGY. INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Grace Dearborn's DARAMEND™ Bioremediation Technology was developed to treat soils/sediment contaminated with organic contaminants using solid-phase organic amendments. The amendments increase the soil’s ability to supply biologically available water/nutrients to micro...

  16. Advanced Stirling Technology Development at NASA Glenn Research Center

    Science.gov (United States)

    Shaltens, Richard K.; Wong, Wayne A.

    2007-01-01

    The NASA Glenn Research Center has been developing advanced energy-conversion technologies for use with both radioisotope power systems and fission surface power systems for many decades. Under NASA's Science Mission Directorate, Planetary Science Theme, Technology Program, Glenn is developing the next generation of advanced Stirling convertors (ASCs) for use in the Department of Energy/Lockheed Martin Advanced Stirling Radioisotope Generator (ASRG). The next-generation power-conversion technologies require high efficiency and high specific power (watts electric per kilogram) to meet future mission requirements to use less of the Department of Energy's plutonium-fueled general-purpose heat source modules and reduce system mass. Important goals include long-life (greater than 14-yr) reliability and scalability so that these systems can be considered for a variety of future applications and missions including outer-planet missions and continual operation on the surface of Mars. This paper provides an update of the history and status of the ASC being developed for Glenn by Sunpower Inc. of Athens, Ohio.

  17. Evaluation and Assessment in Educational Information Technology.

    Science.gov (United States)

    Liu, Leping, Ed.; Johnson, D. LaMont, Ed.; Maddux, Cleborne D., Ed.; Henderson, Norma J., Ed.

    This book contains the following articles on evaluating and assessing educational information technology: (1) "Assessing Learning in the New Age of Information Technology in Education" (Leping Liu, D. LaMont Johnson, Cleborne D. Maddux, and Norma J. Henderson); (2) "Instruments for Assessing the Impact of Technology in Education" (Rhonda…

  18. 76 FR 37344 - Technology Evaluation Process

    Science.gov (United States)

    2011-06-27

    .... Department of Energy, Building Technologies Program, Mailstop EE-2J, Revisions to Energy Efficiency... Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue... Office of Energy Efficiency and Renewable Energy Technology Evaluation Process AGENCY: Office of...

  19. Evaluating Internal Technological Capabilities in Energy Companies

    Directory of Open Access Journals (Sweden)

    Mingook Lee

    2016-03-01

    Full Text Available As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsistent results when different models are used. To solve these problems, this paper proposes a comprehensive framework for evaluating technological capabilities in energy companies by considering the complex properties of technological knowledge. For this purpose, we first explored various factors affecting technological capabilities and divided the factors into three categories: individual, organizational, and technology competitiveness. Second, we identified appropriate evaluation items for each category to measure the technological capability. Finally, by using a hybrid approach of qualitative and quantitative methods, we developed an evaluation method for each item and suggested a method to combine the results. The proposed framework was then verified with an energy generation and supply company to investigate its practicality. As one of the earliest attempts to evaluate multi-faceted technological capabilities, the suggested model can support technology and strategic planning.

  20. Evaluation of Command and Control Centers

    Science.gov (United States)

    1981-05-01

    MAUA ) model for the evaluation of C information capabili- ties. MAUA is a structured, logically defensible approach to the evaluation of entities which...vary along more than one dimension. A MAUA model is hierarchical in nature, starting with the specified top-level factor for which an overall score...used in MAUA . One is a "top-down" approach, which begins at the top of a hierarchy, first establishing the relative importance between factors (level

  1. Evaluating Internal Technological Capabilities in Energy Companies

    OpenAIRE

    Mingook Lee; Sungjoo Lee

    2016-01-01

    As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsiste...

  2. [Activities of Goddard Earth Sciences and Technology Center, Maryland University

    Science.gov (United States)

    2003-01-01

    The Goddard Space Flight Center (GSFC) is recognized as a world leader in the application of remote sensing and modeling aimed at improving knowledge of the Earth system. The Goddard Earth Sciences Directorate plays a central role in NASA's Earth Observing System and the U.S. Global Change Research Program. Goddard Earth Sciences and Technology (GEST) is organized as a cooperative agreement with the GSFC to promote excellence in the Earth sciences, and is a consortium of universities and corporations (University of Maryland Baltimore County, Howard University, Hampton University, Caelum Research Corporation and Northrop Grumman Corporation). The aim of this new program is to attract and introduce promising students in their first or second year of graduate studies to Oceanography and Earth system science career options through hands-on instrumentation research experiences on coastal processes at NASA's Wallops Flight Facility on the Eastern Shore of Virginia.

  3. An organizational survey of the Pittsburgh Energy Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Stock, D.A.; Shurberg, D.A.; Haber, S.B.

    1991-09-01

    An Organizational Survey (OS) was administrated at the Pittsburgh Energy Technology Center (PETC) that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concerns, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of culture''; that is, the values attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization.

  4. An organizational survey of the Pittsburgh Energy Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Stock, D.A.; Shurberg, D.A.; Haber, S.B.

    1991-09-01

    An Organizational Survey (OS) was administrated at the Pittsburgh Energy Technology Center (PETC) that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concerns, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of ``culture``; that is, the values attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization.

  5. Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

    2009-03-30

    A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

  6. A review of user-centered design for diabetes-related consumer health informatics technologies.

    Science.gov (United States)

    LeRouge, Cynthia; Wickramasinghe, Nilmini

    2013-07-01

    User-centered design (UCD) is well recognized as an effective human factor engineering strategy for designing ease of use in the total customer experience with products and information technology that has been applied specifically to health care information technology systems. We conducted a literature review to analyze the current research regarding the use of UCD methods and principles to support the development or evaluation of diabetes-related consumer health informatics technology (CHIT) initiatives. Findings indicate that (1) UCD activities have been applied across the technology development life cycle stages, (2) there are benefits to incorporating UCD to better inform CHIT development in this area, and (3) the degree of adoption of the UCD process is quite uneven across diabetes CHIT studies. In addition, few to no studies report on methods used across all phases of the life cycle with process detail. To address that void, the Appendix provides an illustrative case study example of UCD techniques across development stages.

  7. The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

    2003-02-25

    In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies.

  8. Evaluation Study of Day-Care Centers in Israel.

    Science.gov (United States)

    Korazim, Malka; Trachtenberg, Silvia

    In recent years, day-care centers for the elderly have been playing an increasingly important role in the community service system for the elderly in Israel. ESHEL, one of the leading agencies in developing day-care services in Israel initiated a comprehensive evaluation study of day-care centers to identify variations among different types of…

  9. Technology evaluation: PRO-542, Progenics Pharmaceuticals inc.

    Science.gov (United States)

    Mukhtar, M; Parveen, Z; Pomerantz, R J

    2000-12-01

    Progenics's rCD4-IgG2 (PRO-542) is a recombinant fusion protein, which has been developed using the company's Universal Antiviral Binding (UnAB) technology, and is in phase I/II clinical trials for the treatment of human immunodeficiency virus type I (HIV-1) infection [273391]. At the beginning of 1997, Progenics received a Phase II Small Business Innovation Research Program (SBIR) grant from the National Institute of Allergy and Infectious diseases (NIAID) to fund the development of PRO-542 [236048]. A further grant of $2.7 million was awarded in August 1998 for the clinical evaluation of PRO-542 and other anti-HIV therapies [294200]. Progenics is collaborating with the Aaron Diamond AIDS Research Center (ADARC) in New York and the Center for Disease Control and Prevention in Atlanta [178410]. In February 2000, Progenics and Genzyme Transgenics Corp signed an agreement to continue the development of a transgenic source of PRO-542. Genzyme will develop transgenic goats that produce PRO-542 in their milk in exchange for undisclosed fees and milestone payments. Genzyme will supply PRO-542 to Progenics for clinical trials with a possibility for eventual commercial supply [357291]. Following on from this, in October 2000, Progenics received an SBIR grant to fund a two-year project with Genzyme Transgenics into the development of cost-effective methods for the manufacture of PRO-542, by optimization of the production of the drug in the milk of transgenic dairy animals [385982]. In August 2000, Punk, Ziegel & Company predicted that Progenics Pharmaceuticals will become sustainably profitable in 2003 following the launch of PRO-542 and GMK (Progenics Pharmaceuticals) in 2002 [390063].

  10. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  11. Technology evaluation report, commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1976-04-01

    Criteria are presented which are to be met by solar hardware for inclusion in the demonstration program. Assessments are made, based on a survey made of solar hardware manufacturers and developers, of when components, subsystems, and systems will be available for demonstration according to the technology status categories set forth in ERDA 23A. Task outlines are provided for development activity recommended to improve available systems or develop advanced systems for later demonstration cycles. (WDM)

  12. National Security Technology Incubator Evaluation Process

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2007-12-31

    This report describes the process by which the National Security Technology Incubator (NSTI) will be evaluated. The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report includes a brief description of the components, steps, and measures of the proposed evaluation process. The purpose of the NSPP is to promote national security technologies through business incubation, technology demonstration and validation, and workforce development. The NSTI will focus on serving businesses with national security technology applications by nurturing them through critical stages of early development. An effective evaluation process of the NSTI is an important step as it can provide qualitative and quantitative information on incubator performance over a given period. The vision of the NSTI is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety and security. The mission of the NSTI is to identify, incubate, and accelerate technologies with national security applications at various stages of development by providing hands-on mentoring and business assistance to small businesses and emerging or growing companies. To achieve success for both incubator businesses and the NSTI program, an evaluation process is essential to effectively measure results and implement corrective processes in the incubation design if needed. The evaluation process design will collect and analyze qualitative and quantitative data through performance evaluation system.

  13. 76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

    Science.gov (United States)

    2011-06-17

    ..., Detroit, MI; UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including... Center, Technology Training Joint Programs Staff, Detroit, Michigan (TA-W-71,047) and Warren, Michigan..., Technology Training Joint Programs Staff. The Department has determined that these workers were...

  14. Evaluating innovation networks in emerging technologies

    NARCIS (Netherlands)

    Valk, T. van der; Chappin, M.M.H.; Gijsbers, G.W.

    2011-01-01

    Interorganisational innovation networks are increasingly important for innovation in emerging technology fields. The performance of such networks can have a large impact on the future development of emerging technologies. A useful framework for the evaluation of innovation networks however does not

  15. Health Information Technology Adoption in California Community Health Centers

    Science.gov (United States)

    Kim, Katherine K.; Rudin, Robert S.; Wilson, Machelle D.

    2016-01-01

    Objectives National and state initiatives to spur adoption of electronic health record (EHR) use and health information exchange (HIE) among providers in rural and underserved communities have been in place for 15 years. Our goal was to systematically assess the impact of these initiatives by quantifying the level of adoption and key factors associated with adoption among community health centers (CHCs) in California. Study Design Cross-sectional statewide survey. Methods We conducted a telephone survey of all California primary care CHCs from August to September 2013. Multiple logistic regressions were fit to test for associations between various practice characteristics and adoption of EHRs, Meaningful Use (MU)–certified EHRs, and HIE. For the multivariable model, we included those variables which were significant at the P = .10 level in the univariate tests. Results We received responses from 194 CHCs (73.5% response rate). Adoption of any EHRs (80.3%) and MU–certified EHRs (94.6% of those with an EHR) was very high. Adoption of HIE is substantial (48.7%) and took place within a few years (mean = 2.61 years; SD = 2.01). More than half (54.7%) of CHCs are able to receive data into the EHR, indicating some level of interoperability. Patient engagement capacity is moderate, with 21.6% offering a personal health record, and 55.2% electronic visit summaries. Rural location and belonging to a multi-site clinic organization both increase the odds of adoption of EHRs, HIE, and electronic visit summary, with odds ratios ranging from 0.63 to 3.28 (all P values <.05). Conclusions Greater adoption of health information technology (IT) in rural areas may be the result of both federal and state investments. As CHCs lack access to capital for investments, continued support of technology infrastructure may be needed for them to further leverage health IT to improve healthcare. PMID:26760431

  16. Technology Transfer from University-Based Research Centers: The University of New Mexico Experience.

    Science.gov (United States)

    Rogers, Everett M.; Hall, Brad; Hashimoto, Michio; Steffensen, Morten; Speakman, Kristen L.; Timko, Molly K.

    1999-01-01

    A study of 55 research centers at the University of New Mexico investigated the nature of the typical center, why funding has risen during the 1990s, reasons for founding the centers, the director's role, how university-based research centers transfer technology to private companies and other organizations, and what determines program…

  17. Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

  18. Turbine Inflow Characterization at the National Wind Technology Center: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, A.; Schreck, S.; Scott, G.; Kelley, N.; Lundquist, J.

    2012-01-01

    Utility-scale wind turbines operate in dynamic flows that can vary significantly over timescales from less than a second to several years. To better understand the inflow to utility-scale turbines, two inflow towers were installed and commissioned at the National Renewable Energy Laboratory's (NREL) National Wind Technology Center near Boulder, Colorado, in 2011. These towers are 135 m tall and instrumented with a combination of sonic anemometers, cup anemometers, wind vanes, and temperature measurements to characterize the inflow wind speed and direction, turbulence, stability and thermal stratification to two utility-scale turbines. Herein, we present variations in mean and turbulent wind parameters with height, atmospheric stability, and as a function of wind direction that could be important for turbine operation as well as persistence of turbine wakes. Wind speed, turbulence intensity, and dissipation are all factors that affect turbine performance. Our results shown that these all vary with height across the rotor disk, demonstrating the importance of measuring atmospheric conditions that influence wind turbine performance at multiple heights in the rotor disk, rather than relying on extrapolation from lower levels.

  19. Interactivity Centered Usability Evaluation (ICUE) for Course Management Systems

    Science.gov (United States)

    Yoon, Sangil

    2010-01-01

    ICUE (Interactivity Centered Usability Evaluation) is an enhanced usability testing protocol created by the researcher. ICUE augments the facilitator's role for usability testing, and offers strategies in developing and presenting usability tasks during a testing session. ICUE was designed to address weaknesses found in the usability evaluation of…

  20. Software Test And Evaluation Center Of CASC Established

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The software Test and Evaluation Center of CASC(CASC-STEC) was established recently.The establishment of the CASC-STEC is an important measure to strengthen the capability of software test and evaluation,to ensure the quality of software products and improve the level of software engineering.

  1. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center

    Science.gov (United States)

    1976-01-01

    Updated information is given pertaining to Technology Use Studies Center (TUSC) clients who are those that receive/use information as disseminated by the center. The client information is presented as a continuation of client data as set forth in the center's previous annual report.

  2. Evaluation of the technology roadmap for intelligent building technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-03-01

    A Technology Roadmap (TRM) is a process tool developed to help Canadian industries identify and address the technology challenges in the future. This report presented the findings from an evaluation of the Technology Roadmap for Intelligent Building Technologies (IBT TRM) that began in 1999 and was released in 2002. The IBT TRM was a collaborative research project between industry and 5 Canadian federal government organizations. The project was managed by the Continental Automated Buildings Association (CABA). The purpose of the TRM was to clarify the challenges and opportunities in the general area of intelligent building technologies. The lack of understanding of IBTs by the construction industry was identified by participants as a significant national issue because it was the major obstacle to the adoption of emerging technologies. New initiatives launched by the IBT TRM as a consequence of the evaluation include the creation of the Intelligent and Integrated Buildings Council (IIBC) sub-committee of CABA to act on the recommendations of the TRM; and planning by CABA for a new TRM to focus on residential rather than commercial buildings. It was also noted that a valuable network of contracts was created during the evaluation process. Various promotional initiatives were reviewed. It was concluded that Industry Canada should continue to play a continued role in the TRM, particularly in the area of fostering and facilitating the development of regulations and standards; further leveraging the expertise of federal research facilities; encouraging international trade efforts; and exploring the applications of intelligent building technologies to other industries. It was suggested that TRMs support the sector's strategic objectives related to the development, adaptation, diffusion and use of sustainable technologies.

  3. Evaluative conditioning of food technologies in China

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2014-01-01

    This study provides an initial examination of the evaluative conditioning (EC) of consumers’ attitudes toward food technologies in China, including how EC can affect consumer acceptance of new technology when participants possess different levels of social trust. In a study using the EC paradigm...... and a combination of between-subjects control groups and within-subjects control conditions, participants considered three food technologies (conventional, enzyme, and genetic), paired with affectively positive, neutral, and negative images. Subsequent evaluative measurements revealed that EC can explain attitude...... formation toward food technologies in China when consumers see affective images, but the strength of the effects varies at different levels of social trust. Participants with a high level of trust in the institutions that promote and regulate the technologies can be conditioned both positively...

  4. Utilising digital technology for dialogue and evaluation

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2016-01-01

    This article investigates how digital technology can enhance evaluation and eflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora...

  5. Utilising digital technology for dialogue and evaluation

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2016-01-01

    This article investigates how digital technology can enhance evaluation and reflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora...

  6. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  7. Utilising digital technology for dialogue and evaluation

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2016-01-01

    This article investigates how digital technology can enhance evaluation and reflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora as ...

  8. George C. Marshall Space Flight Center Research and Technology Report 2014

    Science.gov (United States)

    Keys, A. S. (Compiler); Tinker, M. L. (Compiler); Sivak, A. D. (Compiler)

    2015-01-01

    Many of NASA's missions would not be possible if it were not for the investments made in research advancements and technology development efforts. The technologies developed at Marshall Space Flight Center contribute to NASA's strategic array of missions through technology development and accomplishments. The scientists, researchers, and technologists of Marshall Space Flight Center who are working these enabling technology efforts are facilitating NASA's ability to fulfill the ambitious goals of innovation, exploration, and discovery.

  9. Center for Integrated Nanotechnologies (CINT) Chemical Release Modeling Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Stirrup, Timothy Scott [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-12-20

    This evaluation documents the methodology and results of chemical release modeling for operations at Building 518, Center for Integrated Nanotechnologies (CINT) Core Facility. This evaluation is intended to supplement an update to the CINT [Standalone] Hazards Analysis (SHA). This evaluation also updates the original [Design] Hazards Analysis (DHA) completed in 2003 during the design and construction of the facility; since the original DHA, additional toxic materials have been evaluated and modeled to confirm the continued low hazard classification of the CINT facility and operations. This evaluation addresses the potential catastrophic release of the current inventory of toxic chemicals at Building 518 based on a standard query in the Chemical Information System (CIS).

  10. Planning nuclear energy centers under technological and demand uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Meier, P.M.; Palmedo, P.F.

    1976-01-01

    The question considered is whether new nuclear power plants should be located in nuclear energy centers, or ''power parks'' with co-located fabrication and reprocessing facilities. That issue has been addressed in a recent study by the Nuclear Regulatory Commission and remains under investigation at Brookhaven and elsewhere. So far, however, the advisability of this policy has been analyzed primarily within the framework of a single view of the future. Suggestions of the types of questions that should be asked regarding this policy if it is properly to be viewed as an example of decision making under uncertainty are made. It is concluded that ''A consideration of the various uncertainties involved in the question of dispersed vs. remote siting of energy facilities introduces a number of new elements into the analysis. On balance those considerations provide somewhat greater support for the clustered concept. The NEC approach seems to provide somewhat greater flexibility in accomodating possible future electricity generating technologies. Increased regulatory and construction efficiencies possible in an NEC reduces the impact of demand uncertainty as does the lower costs associated with construction acceleration or deceleration.'' It is also noted that, in the final analysis, ''it is the public's perception of the relative costs and benefits of a measure that determine the acceptability or unacceptability of a particular innovation,'' not the engineer's cost/benefit analysis. It is further noted that if the analysis can identify limits on analytical methods and models, it will not make the job of energy decision-making any easier, but it may make the process more responsive to its impact on society. (MCW)

  11. 78 FR 30303 - National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation...

    Science.gov (United States)

    2013-05-22

    ...Under the provisions of the Paperwork Reduction Act, the General Services Administration will be submitting to the Office of Management and Budget (OMB) a request to review and approve an extension of a previously approved information collection requirement regarding the National Contact Center customer evaluation surveys. In this request, the previously approved surveys have been supplemented......

  12. 75 FR 6032 - National Contact Center; Submission for OMB Review; National Contact Center Customer Evaluation...

    Science.gov (United States)

    2010-02-05

    ...Under the provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the General Services Administration will be submitting to the Office of Management and Budget (OMB) a request to review and approve a renewal of a previously approved information collection requirement regarding the National Contact Center customer evaluation survey. A request for public comments was published......

  13. 78 FR 14549 - National Contact Center; Information Collection; National Contact Center Customer Evaluation Survey

    Science.gov (United States)

    2013-03-06

    ...Under the provisions of the Paperwork Reduction Act, the General Services Administration will be submitting to the Office of Management and Budget (OMB) a request to review and approve an extension of a previously approved information collection requirement regarding the National Contact Center customer evaluation surveys. In this request, the previously approved surveys have been supplemented......

  14. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  15. Effective evaluation of green building technologies

    Energy Technology Data Exchange (ETDEWEB)

    Sawers, J. [Reid Crowther and Partners Ltd., Calgary, AB (Canada)

    1998-12-01

    A proposed green building technology evaluation model is described. The model was developed as result of the inability of traditional evaluation techniques such as pay-back period, net present value and life cycle cost, to deal effectively with the intangible benefits of green technologies. Unlike traditional tools which are primarily financial in nature, the proposed model is based on a model developed in the Information Technology (IT) industry. It extends the concept of `benefit` to include a wide range of factors that affect a system`s business value. It also extends the concept of `cost` to include an evaluation of risk. The model considers nine criteria divided into two groups: business criteria and technology criteria. Business criteria encompass economic impact, strategic alignment, competitive advantage, improved management information, competitive risk, and organizational risk. The technological criteria comprise strategic architecture, definition uncertainty, and infrastructure risk. Assignment of weights to each of these criteria is somewhat subjective, but subjectivity can be overcome by the consistent use of good judgment. The green building technologies model draws on both the IT model and the value management concept (i.e. `value to a client within a particular context`). The model provides for the use of a value hierarchy to establish and weigh decision criteria; it expands the definition of project `costs` and `benefits`, and provides a decision matrix and sensitivity analysis. 6 refs., 4 figs.

  16. Performance Evaluation Methods for Assistive Robotic Technology

    Science.gov (United States)

    Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

    Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

  17. The National Center of Evaluation for Higher Education (CENEVAL) and the External Evaluation of Mexican Education

    National Research Council Canada - National Science Library

    Antonio Gago Huguet

    2000-01-01

    The National Center for the Evaluation of Higher Education (CENEVAL) has developed and set in motion a series of examinations which permits the evaluation of students when they complete their Bachelor’s level education...

  18. A usage-centered evaluation methodology for unmanned ground vehicles

    NARCIS (Netherlands)

    Diggelen, J. van; Looije, R.; Mioch, T.; Neerincx, M.A.; Smets, N.J.J.M.

    2012-01-01

    This paper presents a usage-centered evaluation method to assess the capabilities of a particular Unmanned Ground Vehicle (UGV) for establishing the operational goals. The method includes a test battery consisting of basic tasks (e.g., slalom, funnel driving, object detection). Tests can be of diffe

  19. Residential Environmental Education Center Program Evaluation: An Ongoing Challenge

    Science.gov (United States)

    Bourke, Nicholas; Buskist, Connie; Herron, Julie

    2014-01-01

    Residential environmental education centers (REECs) have been criticized for their lack of quality program evaluation. However, the last national study done on the practices of REECs was Chenery and Hammerman's (1985) research. This article presents the results of a national survey of directors of REECs (n = 114) that gives insight into the…

  20. Usability Evaluation of the Student Centered e-Learning Environment

    Science.gov (United States)

    Junus, Inas Sofiyah; Santoso, Harry Budi; Isal, R. Yugo K.; Utomo, Andika Yudha

    2015-01-01

    Student Centered e-Learning Environment (SCeLE) has substantial roles to support learning activities at Faculty of Computer Science, Universitas Indonesia (Fasilkom UI). Although it has been utilized for about 10 years, the usability aspect of SCeLE as an e-Learning system has not been evaluated. Therefore, the usability aspects of SCeLE Fasilkom…

  1. A usage-centered evaluation methodology for unmanned ground vehicles

    NARCIS (Netherlands)

    Diggelen, J. van; Looije, R.; Mioch, T.; Neerincx, M.A.; Smets, N.J.J.M.

    2012-01-01

    This paper presents a usage-centered evaluation method to assess the capabilities of a particular Unmanned Ground Vehicle (UGV) for establishing the operational goals. The method includes a test battery consisting of basic tasks (e.g., slalom, funnel driving, object detection). Tests can be of diffe

  2. Graduate Automotive Technology Education (GATE) Program: Center of Automotive Technology Excellence in Advanced Hybrid Vehicle Technology at West Virginia University

    Energy Technology Data Exchange (ETDEWEB)

    Nigle N. Clark

    2006-12-31

    This report summarizes the technical and educational achievements of the Graduate Automotive Technology Education (GATE) Center at West Virginia University (WVU), which was created to emphasize Advanced Hybrid Vehicle Technology. The Center has supported the graduate studies of 17 students in the Department of Mechanical and Aerospace Engineering and the Lane Department of Computer Science and Electrical Engineering. These students have addressed topics such as hybrid modeling, construction of a hybrid sport utility vehicle (in conjunction with the FutureTruck program), a MEMS-based sensor, on-board data acquisition for hybrid design optimization, linear engine design and engine emissions. Courses have been developed in Hybrid Vehicle Design, Mobile Source Powerplants, Advanced Vehicle Propulsion, Power Electronics for Automotive Applications and Sensors for Automotive Applications, and have been responsible for 396 hours of graduate student coursework. The GATE program also enhanced the WVU participation in the U.S. Department of Energy Student Design Competitions, in particular FutureTruck and Challenge X. The GATE support for hybrid vehicle technology enhanced understanding of hybrid vehicle design and testing at WVU and encouraged the development of a research agenda in heavy-duty hybrid vehicles. As a result, WVU has now completed three programs in hybrid transit bus emissions characterization, and WVU faculty are leading the Transportation Research Board effort to define life cycle costs for hybrid transit buses. Research and enrollment records show that approximately 100 graduate students have benefited substantially from the hybrid vehicle GATE program at WVU.

  3. Evaluating community engagement in an academic medical center.

    Science.gov (United States)

    Szilagyi, Peter G; Shone, Laura P; Dozier, Ann M; Newton, Gail L; Green, Theresa; Bennett, Nancy M

    2014-04-01

    From the perspective of academic medical centers (AMCs), community engagement is a collaborative process of working toward mutually defined goals to improve the community's health, and involves partnerships between AMCs, individuals, and entities representing the surrounding community. AMCs increasingly recognize the importance of community engagement, and recent programs such as Prevention Research Centers and Clinical and Translational Science Awards have highlighted community engagement activities. However, there is no standard or accepted metric for evaluating AMCs' performance and impact of community engagement activities.In this article, the authors present a framework for evaluating AMCs' community engagement activities. The framework includes broad goals and specific activities within each goal, wherein goals and activities are evaluated using a health services research framework consisting of structure, process, and outcome criteria. To illustrate how to use this community engagement evaluation framework, the authors present specific community engagement goals and activities of the University of Rochester Medical Center to (1) improve the health of the community served by the AMC; (2) increase the AMC's capacity for community engagement; and (3) increase generalizable knowledge and practices in community engagement and public health.Using a structure-process-outcomes framework, a multidisciplinary team should regularly evaluate an AMC's community engagement program with the purpose of measurably improving the performance of the AMC and the health of its surrounding community.

  4. Continuous evaluation of evolving behavioral intervention technologies.

    Science.gov (United States)

    Mohr, David C; Cheung, Ken; Schueller, Stephen M; Hendricks Brown, C; Duan, Naihua

    2013-10-01

    Behavioral intervention technologies (BITs) are web-based and mobile interventions intended to support patients and consumers in changing behaviors related to health, mental health, and well-being. BITs are provided to patients and consumers in clinical care settings and commercial marketplaces, frequently with little or no evaluation. Current evaluation methods, including RCTs and implementation studies, can require years to validate an intervention. This timeline is fundamentally incompatible with the BIT environment, where technology advancement and changes in consumer expectations occur quickly, necessitating rapidly evolving interventions. However, BITs can routinely and iteratively collect data in a planned and strategic manner and generate evidence through systematic prospective analyses, thereby creating a system that can "learn." A methodologic framework, Continuous Evaluation of Evolving Behavioral Intervention Technologies (CEEBIT), is proposed that can support the evaluation of multiple BITs or evolving versions, eliminating those that demonstrate poorer outcomes, while allowing new BITs to be entered at any time. CEEBIT could be used to ensure the effectiveness of BITs provided through deployment platforms in clinical care organizations or BIT marketplaces. The features of CEEBIT are described, including criteria for the determination of inferiority, determination of BIT inclusion, methods of assigning consumers to BITs, definition of outcomes, and evaluation of the usefulness of the system. CEEBIT offers the potential to collapse initial evaluation and postmarketing surveillance, providing ongoing assurance of safety and efficacy to patients and consumers, payers, and policymakers.

  5. Sustainability evaluation of water supply technologies

    DEFF Research Database (Denmark)

    Godskesen, Berit

    - & stormwater harvesting as the most environmentally friendly technology followed by the cases relying on groundwater abstraction. The least favorable case is desalination of seawater. Rain- & stormwater harvesting and desalination have markedly lower environmental impacts in the use stage compared to the base...... the main driver is the limitations of the available resource from the groundwater bodies. The environmental impact of products and systems can be evaluated by life-cycle assessment (LCA) which is a comprehensive and dominant decision support tool capable of evaluating a water system from the cradle...... to the grave. The first aim of this PhD thesis was to assess the environmental impacts of water supply technologies. For this LCA was used to compare the impacts of Copenhagen’s water supply technology of today with relevant cases considered for implementation in future water supply. The importance of placing...

  6. Technology evaluation for time sensitive data transport

    DEFF Research Database (Denmark)

    Wessing, Henrik; Breach, Tony; Colmenero, Alberto

    Emerging research and commercial services like IPTV, high quality video conferencing, remote surgeries and cloud computing in particular are time sensitive and their successful deployment assumes network with minimal delay and jitter in combination with high bandwidth and preferably low packet loss....... The NREN communities must provide underlying network infrastructures and transport technologies to facilitate ser-vices with such requirements to the network. In this paper we investigate and evaluate circuit and packet based transport technologies from classic best effort IP over MPLS flavours, Provider...... overhead and restoration time. Thirdly, complexity and automation possibilities for establishment of paths for high demanding applica-tions, and finally how the technologies are backed by research communities and major vendors like Ciena, Alcatel-Lucent, Nokia-Siemens and Huawei. The technologies...

  7. Child-Centered Evaluation: Broadening the Child/Designer Dyad

    Directory of Open Access Journals (Sweden)

    Sofia Pardo

    2008-01-01

    Full Text Available Some settings challenge a literal interpretation of user-centered design orthodoxy; that design is best done for a user, by designing with that user. We explore the value that a copresent proxy and interpreter can bring to certain hard-to-reach or difficult-to-interpret situations; in this case the evaluation of educational software intended to be used by children. We discuss the effect that introducing a teacher had on the results of the evaluation and conclude that adding an expert-based component to evaluations increased its diagnostic power.

  8. Evaluation of Reference Centers for Special Immunobiologicals implementation

    Directory of Open Access Journals (Sweden)

    Laura Andrade Lagôa Nóbrega

    2016-01-01

    Full Text Available ABSTRACT OBJECTIVE To describe the Reference Centers for Special Immunobiologicals and evaluate their implementation considering formal regulations. METHODS We conducted a program evaluation, of evaluative research type. From August 2011 to January 2012, a questionnaire was applied to the 42 Reference Centers for Special Immunobiologicals existing in the Country, approaching the structure, human resources, and developed activities dimensions. We conducted a descriptive analysis of data and used a clustering for binary data with the squared Euclidean distance, by the farthest neighbor method, to aggregate services with similar features. RESULTS We observed great diversity among the services in the three dimensions. The clustering resulted in five service profiles, named according to their characteristics. 1 Best structure: 12 Reference Centers for Special Immunobiologicals with the highest proportion of services with the minimum of rooms recommended, purpose-built vaccine refrigerators, preventive maintenance of the cold chain, and oxygen source. 2 Immunobiologicals distributor: six Reference Centers for Special Immunobiologicals that distributed more than applied immunogens; no doctor present for more than half of the working hours and no purpose-built vaccine refrigerators . 3 Incipient implementation: five Reference Centers for Special Immunobiologicals with inadequate structure, such as absence of purpose-built vaccine refrigerators, preventive maintenance of the cold chain and oxygen source; none had computer. 4 Vaccination rooms: 13 Reference Centers for Special Immunobiologicals, everyone did routine immunization, most participated in vaccination campaigns. 5 Teaching and research: six services, all inserted into teaching hospitals, developed researches and received trainees; most had doctors in more than half of the working hours. CONCLUSIONS The evaluation of the Reference Centers for Special Immunobiologicals implementation was based on

  9. End-User Evaluations of Semantic Web Technologies

    Energy Technology Data Exchange (ETDEWEB)

    McCool, Rob; Cowell, Andrew J.; Thurman, David A.

    2005-11-07

    Stanford University's Knowledge Systems Laboratory (KSL) is working in partnership with Battelle Memorial Institute and IBM Watson Research Center to develop a suite of technologies for information extraction, knowledge representation & reasoning, and human-information interaction, in unison entitled 'Knowledge Associates for Novel Intelligence' (KANI). We have developed an integrated analytic environment composed of a collection of analyst associates, software components that aid the user at different stages of the information analysis process. An important part of our participatory design process has been to ensure our technologies and designs are tightly integrate with the needs and requirements of our end users, To this end, we perform a sequence of evaluations towards the end of the development process that ensure the technologies are both functional and usable. This paper reports on that process.

  10. Evaluation of X-Ray Protective Measurements in Intraoral Radiography Equipped Centers in Yazd

    OpenAIRE

    D.Goodarzi Pour; S.Ebrahimi Moghaddam

    2005-01-01

    Statement of Problem: A few decades have past from using radiographic technology as an accurate paraclinical method and always protective measurements is applicated against ionizing radiation. As dentalradiography is a routine procedure in dentistry the importance of protective strategies is clear.Propose: The aim of this descriptive study is to evaluate the protection principles in centers which haveintraoral radiographic devices in Yazd.Material and Methods: We have considered all three asp...

  11. Technology Evaluation Report: Non-destructive ...

    Science.gov (United States)

    Technology Evaluation Report HSRP is working to develop tools and information that will help detect the intentional introduction of chemical or biological contaminants in buildings or water systems, the containment of these contaminants, the decontamination of buildings and/or water systems, and the management of wastes generated from decontamination and cleanup operations. Evaluation of the performance of CBI Polymers’ DeconGelTM 1108, Environmental Alternatives, Inc.’s (EAI’s) Rad-Release II (RRII), Environmental Alternatives, Inc.’s SuperGel, and Intek Technologies’ LH-21. The objective of evaluating these technologies was to test their ability to remove radioactive cesium (Cs)-137 from the mixed building material coupons of brick with mortar, tile with grout, granite with mortar, all mortar and all grout coupons.

  12. A review of the design and development processes of simulation for training in healthcare - A technology-centered versus a human-centered perspective.

    Science.gov (United States)

    Persson, Johanna

    2017-01-01

    This article reviews literature about simulation systems for training in healthcare regarding the prevalence of human-centered approaches in the design and development of these systems, motivated by a tradition in this field of working technology-centered. The results show that the focus on human needs and context of use is limited. It is argued that a reduction of the focus on technical advancements in favor of the needs of the users and the healthcare community, underpinned by human factors and ergonomics theory, is favorable. Due to the low number of identified articles describing or discussing human-centered approaches it is furthermore concluded that the publication culture promotes technical descriptions and summative evaluations rather than descriptions and reflections regarding the design and development processes. Shifting the focus from a technology-centered approach to a human-centered one can aid in the process of creating simulation systems for training in healthcare that are: 1) relevant to the learning objectives, 2) adapted to the needs of users, context and task, and 3) not selected based on technical or fidelity criteria.

  13. Information for Our Partners | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NCI TTC CRADA PAYMENT OPTIONS: Electronic Payments by Wire Transfer via Fedwire, Mail a check to the Institute or Center, or Automated Clearing House (ACH)/Electronic Funds Transfer (ETF) payments via Pay.gov (NCI ONLY). | [google6f4cd5334ac394ab.html

  14. Dissemination of Technology to Evaluate Healthy Food Incentive Programs.

    Science.gov (United States)

    Freedman, Darcy A; Hunt, Alan R; Merritt, Katie; Shon, En-Jung; Pike, Stephanie N

    2017-03-01

    Federal policy supports increased implementation of monetary incentive interventions for chronic disease prevention among low-income populations. This study describes how a Prevention Research Center, working with a dissemination partner, developed and distributed technology to support nationwide implementation and evaluation of healthy food incentive programming focused on Supplemental Nutrition Assistance Program recipients. FM Tracks, an iOS-based application and website, was developed to standardize evaluation methods for healthy food incentive program implementation at direct-to-consumer markets. This evaluation examined diffusion and adoption of the technology over 9 months (July 2015-March 2016). Data were analyzed in 2016. FM Tracks was disseminated to 273 markets affiliated with 37 regional networks in 18 states and Washington, DC. All markets adopted the sales transaction data collection feature, with nearly all recording at least one Supplemental Nutrition Assistance Program (99.3%) and healthy food incentive (97.1%) transaction. A total of 43,493 sales transactions were recorded. By the ninth month of technology dissemination, markets were entering individual sales transactions using the application (34.5%) and website (29.9%) and aggregated transactions via website (35.6%) at similar rates. Use of optional evaluation features like recording a customer ID with individual transactions increased successively with a low of 22.2% during the first month to a high of 69.2% in the ninth month. Systematic and widely used evaluation technology creates possibilities for pragmatic research embedded within ongoing, real-world implementation of food access interventions. Technology dissemination requires supportive technical assistance and continuous refinement that can be advanced through academic-practitioner partnerships. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  15. Marshall Space Flight Center Research and Technology Report 2015

    Science.gov (United States)

    Keys, A. S. (Compiler); Tinker, M. L. (Compiler); Sivak, A. D. (Compiler); Morris, H. C. (Compiler)

    2015-01-01

    The investments in technology development we made in 2015 not only support the Agency's current missions, but they will also enable new missions. Some of these projects will allow us to develop an in-space architecture for human space exploration; Marshall employees are developing and testing cutting-edge propulsion solutions that will propel humans in-space and land them on Mars. Others are working on technologies that could support a deep space habitat, which will be critical to enable humans to live and work in deep space and on other worlds. Still others are maturing technologies that will help new scientific instruments study the outer edge of the universe-instruments that will provide valuable information as we seek to explore the outer planets and search for life.

  16. Factors predicting the use of technology: findings from the Center for Research and Education on Aging and Technology Enhancement (CREATE).

    Science.gov (United States)

    Czaja, Sara J; Charness, Neil; Fisk, Arthur D; Hertzog, Christopher; Nair, Sankaran N; Rogers, Wendy A; Sharit, Joseph

    2006-06-01

    The successful adoption of technology is becoming increasingly important to functional independence. The present article reports findings from the Center for Research and Education on Aging and Technology Enhancement (CREATE) on the use of technology among community-dwelling adults. The sample included 1,204 individuals ranging in age from 18-91 years. All participants completed a battery that included measures of demographic characteristics, self-rated health, experience with technology, attitudes toward computers, and component cognitive abilities. Findings indicate that the older adults were less likely than younger adults to use technology in general, computers, and the World Wide Web. The results also indicate that computer anxiety, fluid intelligence, and crystallized intelligence were important predictors of the use of technology. The relationship between age and adoption of technology was mediated by cognitive abilities, computer self-efficacy, and computer anxiety. These findings are discussed in terms of training strategies to promote technology adoption.

  17. A perspective on ATR evaluation technology

    Science.gov (United States)

    Sadjadi, Firooz; Bazakos, Mike

    1990-09-01

    A historical perspective on the evolution of performance evaluation technology for automatic target recognition (ATR) systems is presented. It is shown that the ad hoc and artistic evaluation techniques of the past are now evolving into scientific approaches. The most perspective areas of this technology include: (1) first principle coupled, multi-sensor modeling of objects, environment, atmosphere, and vegetation; (2) integration of models with the task of ATR algorithm development; (3) integration of a new generation of parallel processor that can process every pixel of an image without the need for data reduction; (4) extending the instrumentation control of ATR to include sensor selection and sensor fusion; and (5) development of signal metrics for radar, acoustic and ladar, and linking these metrics to phenomenological sources.

  18. Performance evaluation soil samples utilizing encapsulation technology

    Energy Technology Data Exchange (ETDEWEB)

    Dahlgran, James R.

    1997-12-01

    Performance evaluation soil samples and method of their preparation are described using encapsulation technology to encapsulate analytes which are introduced into a soil matrix for analysis and evaluation by analytical laboratories. Target analytes are mixed in an appropriate solvent at predetermined concentrations. The mixture is emulsified in a solution of polymeric film forming material. The emulsified solution is polymerized to form microcapsules. The microcapsules are recovered, quantitated and introduced into a soil matrix in a predetermined ratio to form soil samples with the desired analyte concentration.

  19. A Qualitative Study of the Treatment Improvement Protocols (TIPs): An Assessment of the Use of TIPs by Individuals Affiliated with the Addiction Technology Transfer Centers (ATTCs).

    Science.gov (United States)

    Hayashi, Susan W.; Suzuki, Marcia; Hubbard, Susan M.; Huang, Judy Y.; Cobb, Anita M.

    2003-01-01

    Evaluated the Addiction Technology Transfer Centers (ATTCs) of the Center for Substance Abuse Treatment (CSAT) as a means of diffusion of innovations, focusing on use of the Treatment Improvement Protocols (TIPs). Qualitative studies at 6 ATTCs that included 57 interviews show that the CSAT is at the forefront of providing resources to the…

  20. The Employee Invention Report (EIR) | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    After making a unique, non-obvious, and useful discovery, NIH researchers must immediately contact their Laboratory or Branch Chief and inform him or her of a possible invention, and then consult with your NCI TTC Technology Transfer Manager about submitting an Employee Invention Report (EIR) Form. | [google6f4cd5334ac394ab.html

  1. Managing Information Technology in Academic Medical Centers: A "Multicultural" Experience.

    Science.gov (United States)

    Friedman, Charles P.; Corn, Milton; Krumrey, Arthur; Perry, David R.; Stevens, Ronald H.

    1998-01-01

    Examines how beliefs and concerns of academic medicine's diverse professional cultures affect management of information technology. Two scenarios, one dealing with standardization of desktop personal computers and the other with publication of syllabi on an institutional intranet, form the basis for an exercise in which four prototypical members…

  2. Water Reclamation Technology Development at Johnson Space Center

    Science.gov (United States)

    Callahan, Michael R.; Pickering, Karen

    2014-01-01

    Who We Are: A staff of approximately 14 BS, MS, and PhD-Level Engineers and Scientists with experience in Aerospace, Civil, Environmental, and Mechanical Engineering, Chemistry, Physical Science and Water Pollution Microbiology. Our Primary Objective: To develop the next generation water recovery system technologies that will support NASA's long duration missions beyond low-earth orbit.

  3. Co-Development Agreements | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's TTC uses three different co-development agreements to help industry and academia interact and partner with National Institutes of Health laboratories and scientists to support technology development activities. | [google6f4cd5334ac394ab.html

  4. Project of space research and technology center in Engelhardt astronomical observatory

    Science.gov (United States)

    Nefedyev, Y.; Gusev, A.; Sherstukov, O.; Kascheev, R.; Zagretdinov, R.

    2012-09-01

    Today on the basis of Engelhardt astronomical observatory (EAO) is created Space research and technology center as consistent with Program for expansion of the Kazan University. The Centre has the following missions: • EDUCATION • SCIENCE • ASTRONOMICAL TOURISM

  5. Chinese Telephone Number-Input Technology and Its Applications in a Customer Service Call Center

    Institute of Scientific and Technical Information of China (English)

    罗仁; 许晓革; 兰德品; 郭盛芳

    2002-01-01

    The Chinese intelligence input technology, its applications, and a customer serv ice call center system are developed. This technology can be used both in stan dard English telephone number-input keyboard and in Chinese telephone number- input keyboard .And authors develop sophisticated technologies including "Pinyi n" (the Chinese p honetic alphabet ) encoding technology of phonetic symbol code and formal symbo l code of Chinese character structure, phrase encoding technology, input technol ogy of whole sentence intelligence encoding and input technology of Chinese tele phone number encoding.

  6. 76 FR 39811 - International Center for Technology Assessment and the Center for Food Safety; Noxious Weed...

    Science.gov (United States)

    2011-07-07

    ... Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered... engineered for tolerance to the herbicide glyphosate should not be listed as a Federal noxious weed and... noxious weeds. Our decision is based on our analysis of available scientific data, our weed risk...

  7. Earth System Grid Center for Enabling Technologies: Building a Global Infrastructure for Climate Change Research

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ahrens, J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ananthakrishnan, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Bell, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bharathi, S. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Brown, D. [National Center for Atmospheric Reserch, Boulder, CO (United States); Chen, M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chervenak, A. L. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Cinquini, L. [National Aeronautics and Space Administration, Pasadena, CA (United States); Drach, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, I. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Fox, P. [Rensselaer Polytechnic Inst., Troy, NY (United States); Hankin, S. [National Oceanic and Atmospheric Administration (PMEL), Seattle, WA (United States); Harper, D. [National Center for Atmospheric Reserch, Boulder, CO (United States); Hook, N. [National Center for Atmospheric Reserch, Boulder, CO (United States); Jones, P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Middleton, D. E. [National Center for Atmospheric Reserch, Boulder, CO (United States); Miller, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nienhouse, E. [National Center for Atmospheric Reserch, Boulder, CO (United States); Schweitzer, R. [National Oceanic and Atmospheric Administration (PMEL), Seattle, WA (United States); Schuler, R. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Shipman, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shoshani, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Siebenlist, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Sim, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Strand, W. G. [National Center for Atmospheric Reserch, Boulder, CO (United States); Wang, F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilcox, H. [National Center for Atmospheric Reserch, Boulder, CO (United States); Wilhelmi, N. [National Center for Atmospheric Reserch, Boulder, CO (United States)

    2010-08-16

    Established within DOE’s Scientific Discovery through Advanced Computing (SciDAC-) 2 program, with support from ASCR and BER, the Earth System Grid Center for Enabling Technologies (ESG-CET) is a consortium of seven laboratories (Argonne National Laboratory [ANL], Los Alamos National Laboratory [LANL], Lawrence Berkeley National Laboratory [LBNL], Lawrence Livermore National Laboratory [LLNL], National Center for Atmospheric Research [NCAR], Oak Ridge National Laboratory [ORNL], and Pacific Marine Environmental Laboratory [PMEL]), and two institutes (Rensselaer Polytechnic Institute [RPI] and the University of Southern California, Information Sciences Institute [USC/ISI]). The consortium’s mission is to provide climate researchers worldwide with a science gateway to access data, information, models, analysis tools, and computational capabilities required to evaluate extreme-scale data sets. Its stated goals are to (1) make data more useful to climate researchers by developing collaborative technology that enhances data usability; (2) meet the specific needs that national and international climate projects have for distributed databases, data access, and data movement; (3) provide a universal and secure web-based data access portal for broad-based multi-model data collections; and (4) provide a wide range of climate data-analysis tools and diagnostic methods to international climate centers and U.S. government agencies. To this end, the ESG-CET is working to integrate all highly publicized climate data sets—from climate simulations to observations—using distributed storage management, remote high-performance units, high-bandwidth wide-area networks, and user desktop platforms in a collaborative problem-solving environment.

  8. BEHAVIOUR OF STONE FACADES IN URBAN CENTERS INNOVATIVE BUILDING TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Antonio Monaco

    1990-12-01

    Full Text Available An innovative technology using stone and granite as exterior sheeting of modern steel and concrete tall buildings is presented, Granites are chosen for the indubitable superior durability in any wheather and polluted atmosfere condition. But to guarantee durability stone sheets have to be mounted in such a way as to avoid any inner irregular stress. In particular stresses from deformation of the main structure must not be trasmitted to the exterior sheeting. Moreover an all-proof wheather barrier has to be incorporated in the factory builded sheeting panel. The innovative technology allowing use of granite and stone in facing of tall buildings is here presented along with two very important realisations: The North Tower in Genoa and the Canary Wharf in London.

  9. The Establishment and Research on Evaluation System for Core Competence and Technological Support Capability of International Travel and Healthcare Centers in Entry- Exit Inspection and Quarantine System%国际旅行卫生保健中心核心能力及技术支撑能力建设评价体系的建立与研究

    Institute of Scientific and Technical Information of China (English)

    秦佳; 章琪; 杨柳; 李俊; 周启明; 韩晓辉; 方筠; 叶魏

    2015-01-01

    Objective] To establish the evaluation system for core competence and technological support capability of International Travel and Healthcare centers in Entry-Exit Inspection and Quarantine system based on current situation and problem-oriented research,in order to provide a guidance and orientation in capacity building practice. [Methods] A literature research was made for literatures and relevant docu-ments of National Ministry of health and General Administration of Quality Supervision,Inspection and Quarantine(AQSIQ). An indicator system evaluation method was conducted from both theoretical and practical perspective according to the research result. Shanghai International Travel and Healthcare center was chosen as a sample. [Results] In accordance with the data,experiences and facts acquired,we es-tablished the evaluation system as target level,access level and indicator level. The case study showed that the core competence and technological support capability of Shanghai center was strong. But the in-formation management capability and public health emergency control ability should be enhanced. [Con-clusion] The evaluation system for core competence and technological support capability of International Travel and Healthcare centers has great practical significance and theory value,thus could play as a direc-tive role in the process of core competence and technology support ability construction.%[目的]对检验检疫系统国际旅行卫生保健中心的核心能力及技术支撑能力建设内涵及评价体系支持理论进行探索,建立与口岸卫生检疫技术保障要求相适应的评价体系。[方法]应用文献研究法分析国内外文献和上级部门印发的有关文件;根据分析结果,从理论和实践上阐述核心能力及技术支撑能力建设的具体内涵,构建其评价体系;搜集整理典型案例,应用案例研究法进行验证。[结果]经研究建立3个层次的指标体系,具体由目标层、

  10. Center for Integration of Medicine and Innovative Technology

    Science.gov (United States)

    2007-11-01

    anastomoses sites. This completes this project. Minimally Invasive Surgery - Craniofacial Surgery Planning – Leonard Kaban, MD, MGH The CIMIT...illness. These developing technologies lessen: the time required for recovery, the pain and suffering associated with therapy, and the overall...The engineering of craniofacial tissues in the laboratory: a review of biomaterials for scaffolds and implant coatings. Dent Clin North Am. 2006;50

  11. Joint research center activity in thermonuclear fusion technology

    Energy Technology Data Exchange (ETDEWEB)

    Casini, G.; Rocco, P. (Commission of the European Communities, Ispra (Italy). Joint Research Centre)

    1984-04-01

    A review of the activities in progress in the field of thermonuclear fusion technology at the Joint Research Centre of the European Communities is presented. The research areas are: (I) reactor studies, including conceptual design studies of experimental Tokamak reactors (INTOR/NET) and safety analyses; (II) experimental investigation on first wall and blanket materials and components. Emphasis has been given to those topics which are not reported in detail in the following articles of the issue.

  12. Hypermedia Laboratory, Defense Applied Information Technology Center; Review for 1988

    Science.gov (United States)

    1988-12-01

    des images. La proliferation des reseatix publics et prives et des services de messagerie oti courrier electronique utilisant de larges bandes et des...technologies tres fiables permer de transporter du texte integral et de proceder a des transferts eLectroniques de documents la oti pour l’instant on...des reseaux de coumrer electronique (comme Infotap et Geomail), et des possibilites de transferts rapides entre collections archivees sur disques et

  13. Technology-Based Biliteracy Centers for the 21st Century Learner

    Science.gov (United States)

    Mercuri, Sandra; Ramos, Laura

    2014-01-01

    The purpose of this reflective article is to present an alternative that incorporates the four language skills in all content areas through technology-based dual-language centers for emergent bilinguals at the elementary level. The authors propose a matrix to plan the centers and include three examples to facilitate language transfer in English…

  14. Between Technological Endorsement and Resistance: The State of Online Writing Centers

    Science.gov (United States)

    Neaderhiser, Stephen; Wolfe, Joanna

    2009-01-01

    Over the past two decades, writing centers have steadily been expanding services and materials they offer online. The way students write and communicate about their writing continues to change, and the writing center has increasingly been looked upon as a site through which technology and writing have the ability to converge in the form of…

  15. Personalized Integrated Educational System: Technology Functions for the Learner- Centered Paradigm of Education

    Science.gov (United States)

    Reigeluth, Charles M.; Aslan, Sinem; Chen, Zengguan; Dutta, Pratima; Huh, Yeol; Lee, Dabae; Lin, Chun-Yi; Lu, Ya-Huei; Min, Mina; Tan, Verily; Watson, Sunnie Lee; Watson, William R.

    2015-01-01

    The learner-centered paradigm of instruction differs in such fundamental ways from the teacher-centered paradigm that it requires technology to serve very different functions. In 2006, a research team at Indiana University began to work on identifying those functions and published their results in 2008. Subsequently, the team elaborated and…

  16. The Efficiency and Effectiveness of the K-12 Energy Technology Education Promotion Centers in Taiwan

    Science.gov (United States)

    Lee, Lung-Sheng

    2013-01-01

    In order to promote energy literacy for graders K-12, the Ministry of Education (MOE) in Taiwan initiated a K-12 Energy Technology Education Project in September 2010. This 40-month project has one project office affiliated to a university, and 18 promotion centers affiliated to 18 schools--including 5 regional centers for upper-secondary schools…

  17. 78 FR 65300 - Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center...

    Science.gov (United States)

    2013-10-31

    ...: Federal Docket Management System Office, 4800 Mark Center Drive, East Tower, 2nd floor, Suite 02G09... of the Secretary Notice of Availability (NOA) for General Purpose Warehouse and Information... Purpose Warehouse and Information Technology Center at Defense Distribution Depot San Joaquin,...

  18. Kennedy space center cardiovascular disease risk reduction program evaluation

    Directory of Open Access Journals (Sweden)

    Kristine S Calderon

    2008-04-01

    Full Text Available Kristine S Calderon1, Charles Smallwood1, David A Tipton21Occupational Medicine and Environmental Health Services, Comprehensive Health Services, Inc., Kennedy Space Center, Kennedy Space Center, FL, USA; 2Aerospace Medicine and Occupational Health Branch, National Aeronautics and Space Administration, Kennedy Space Center, FL, USAAbstract: This program evaluation examined the Kennedy Space Center (KSC Cardiovascular Disease (CVD Risk Reduction Program which aims to identify CVD risk factors and reduce these risk factors through health education phone counseling. High risk participants (those having two or more elevated lipid values are identified from monthly voluntary CVD screenings and counseled. Phone counseling consists of reviewing lab values with the participant, discussing dietary fat intake frequency using an intake questionnaire, and promoting the increase in exercise frequency. The participants are followed-up at two-months and five-months for relevant metrics including blood pressure, weight, body mass index (BMI, total cholesterol, high density lipoprotein (HDL and low density lipoprotein (LDL cholesterol, triglycerides, dietary fat intake, and exercise frequency. Data for three years of the KSC CVD Program included 366 participants, average age of 49 years, 75% male, and 25% female. For those with complete two and five month follow-up data, significant baseline to two-month follow-up comparisons included decreases in systolic blood pressure (p = 0.03; diastolic blood pressure (p = 0.002; total cholesterol, LDL cholesterol and dietary fat intake (all three at p < 0.0001 as well as a significant increase in exercise frequency (p = 0.04. Significant baseline to five-month follow-up comparisons included decreases in triglycerides (p = 0.05; and total cholesterol, LDL cholesterol and dietary intake (all three at p < 0.0001. These program evaluation results indicate that providing brief phone health education counseling and information

  19. CD-ROM technology at the EROS data center

    Science.gov (United States)

    Madigan, Michael E.; Weinheimer, Mary C.

    1993-01-01

    The vast amount of digital spatial data often required by a single user has created a demand for media alternatives to 1/2" magnetic tape. One such medium that has been recently adopted at the U.S. Geological Survey's EROS Data Center is the compact disc (CD). CD's are a versatile, dynamic, and low-cost method for providing a variety of data on a single media device and are compatible with various computer platforms. CD drives are available for personal computers, UNIX workstations, and mainframe systems, either directly connected, or through a network. This medium furnishes a quick method of reproducing and distributing large amounts of data on a single CD. Several data sets are already available on CD's, including collections of historical Landsat multispectral scanner data and biweekly composites of Advanced Very High Resolution Radiometer data for the conterminous United States. The EROS Data Center intends to provide even more data sets on CD's. Plans include specific data sets on a customized disc to fulfill individual requests, and mass production of unique data sets for large-scale distribution. Requests for a single compact disc-read only memory (CD-ROM) containing a large volume of data either for archiving or for one-time distribution can be addressed with a CD-write once (CD-WO) unit. Mass production and large-scale distribution will require CD-ROM replication and mastering.

  20. The 1994 research and technology report at the Goddard Space Flight Center

    Science.gov (United States)

    Soffen, Gerald (Editor); Halem, Milton (Editor); Green, James (Editor); Frost, Kenneth (Editor); Maran, Stephen (Editor); Boyle, Charles (Editor); Truszlowski, Walter (Editor); Sullivan, Walter (Editor); Ottenstein, Howard (Editor)

    1994-01-01

    The breadth of subject material in this 1994 edition of the Research and Technology Report illustrates the broad scope of activities at the Goddard Space Flight Center. The numerous entries dealing with data processing and visualization show the strong emphasis on data and its interpretation. Reports are presented in the following sections: data processing and visualization; space sciences - high energy astronomy, solar system, and new techniques; earth system science - atmospheres, oceans and ice, solid earth, and soils and vegetation; networks, planning, and information systems - mission scheduling and operations, spacecraft operation and status, software engineering, and infrastructure support; engineering and materials - spacecraft subsystems, launch vehicles, thermal control, new mechanisms, and testing and evaluation; and flight projects.

  1. Idaho Nuclear Technology and Engineering Center (INTEC) (formerly ICPP) ash reutilization study

    Energy Technology Data Exchange (ETDEWEB)

    Langenwalter, T.; Pettet, M.; Ochoa, R.; Jensen, S.

    1998-05-01

    Since 1984, the coal-fired plant at the Idaho Nuclear Technology and Engineering Center (INTEC, formerly Idaho Chemical Processing Plant) has been generating fly ash at a rate of approximately 1,000 tons per year. This ash is hydrated and placed in an ash bury pit near the coal-fired plant. The existing ash bury pit will be full in less than 1 year at its present rate of use. A conceptual design to build a new ash bury pit was completed, and the new pit is estimated to cost $1.7 million. This report evaluates ash reutilization alternatives that propose to eliminate this waste stream and save the $1.7 million required to build a new pit. The alternatives include using ash for landfill day cover, concrete admixture, flowable fill, soil stabilization, waste remediation, and carbon recovery technology. Both physical and chemical testing, under the guidance of the American Society for Testing and Materials, have been performed on ash from the existing pit and from different steps within the facility`s processes. The test results have been evaluated, compared to commercial ash, and are discussed as they relate to reutilization alternatives. This study recommends that the ash be used in flowable fill concrete for Deactivation and Demolition work at the Idaho National Engineering and Environmental Laboratory.

  2. Vaccines for HIV | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The development of an effective HIV vaccine has been an ongoing area of research. The high variability in HIV-1 virus strains has represented a major challenge in successful development. Ideally, an effective candidate vaccine would provide protection against the majority of clades of HIV. Two major hurdles to overcome are immunodominance and sequence diversity. This vaccine utilizes a strategy for overcoming these two issues by identifying the conserved regions of the virus and exploiting them for use in a targeted therapy. NCI seeks licensees and/or research collaborators to commercialize this technology, which has been validated in macaque models.

  3. Center for Alternative Energy Storage Research and Technology

    Science.gov (United States)

    2013-03-28

    and civilian markets . Research at CAESRT has been directed primarily at Defense Department (Army) applications to provide effective technology...system-level operational strategies . Specifically, CAESRT has conducted interrelated research on: nanostructured battery and capacitor...applications are sensitive to the characteristics of the applications. Often it takes more than 3nS 2pS 4pS 1pS 3pS 2nS 4nS 1Li 3Li 1C 2C 3C 4C 5C 2Li

  4. A User Centered Approach to Developing Emergent Technology Products

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo; McAloone, Timothy Charles; Schlegel, Tanja

    2008-01-01

    be used too early in the design process, given that users respond best to issues they know or can relate to. This paper presents a case study where a user-centred approach was used to determine when and how to involve users in the design of a TV-enabled mobile telephone. The aim of the study......Current participatory design methods do not allow designers to gain the insight required to develop products with emerging technologies, that is, products that do not have any precedents in the users’ knowledge base and experience. This poses challenges to the designers, as input from users cannot...

  5. Development of a National Center for Hydrogen Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jay C. Almlie; Bruce Wood; Rich Schlupp

    2007-03-01

    In November 2005, the Energy & Environmental Research Center (EERC), ePowerSynergies, Inc. (ePSI), and Resurfice Corporation teamed to develop, produce, and demonstrate the world's first and only fuel cell-powered ice resurfacer. The goals of this project were: {sm_bullet} To educate the public on the readiness, practicality, and safety of fuel cells powered by hydrogen fuel and {sm_bullet} To establish a commercialization pathway in an early-adopter, niche market. The vehicle was developed and produced in a short 3-month span. The vehicle made its world debut at U.S. Senator Byron Dorgan's (D-ND) 2005 Hydrogen Energy Action Summit. Subsequently, the vehicle toured North America appearing at numerous public events and conferences, receiving much attention from international media outlets.

  6. Evaluation of X-Ray Protective Measurements in Intraoral Radiography Equipped Centers in Yazd

    Directory of Open Access Journals (Sweden)

    D.Goodarzi Pour

    2005-02-01

    Full Text Available Statement of Problem: A few decades have past from using radiographic technology as an accurate paraclinical method and always protective measurements is applicated against ionizing radiation. As dentalradiography is a routine procedure in dentistry the importance of protective strategies is clear.Propose: The aim of this descriptive study is to evaluate the protection principles in centers which haveintraoral radiographic devices in Yazd.Material and Methods: We have considered all three aspects of practitioner, environment and patientprotection using questionnaire and visiting those centers.Results: 33/7% of dental offices ,10 clinics ,3 institution and faculty of dentistry had intraoral radiographicequipments. Stablishment of protection principles for radiographer was favorable. 7.7% of centers had x-ray room with leaded walls, 23.1% had curtain , in 69/2% of centers radiographers stood in correct position anddistance while taking radiograph. Regarding to protection of environment, beams leakage control in 23.1% dental offices, 70% of clinics, all institution and faculty of dentistry have done.Conclusion: Non of the centers used rectangular localizator, thyroid shield, film holder and just some centers used leaded apron in specific circumstances. We have concluded that patient protection constitute less consideration. Generally lack of protective consideration is related to deficient knowledge of operators. Lackof information about protection equipments causes decrease of demanding of these tools and ultimately lack of these equipments in the market.

  7. Why NIH Scientists Need to Report an Invention | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    As an NIH scientist, you must report new inventions, including improvements of previously reported inventions, to the Technology Transfer Manager assigned to your Laboratory. If you do not know the name of your TTM, please call or email the Technology Transfer Center.  | [google6f4cd5334ac394ab.html

  8. Using a Student-Centered Model for Assessing Preservice Teachers' Use of Technology in Student Teaching

    Science.gov (United States)

    Pratt, David; Stevenson, Heidi J.

    2007-01-01

    This article describes a student-centered assessment model used at a large university to encourage preservice teachers' use of technology in the K-12 classroom. This model allows preservice teachers to have discretion over the content, form, and time period in which they complete technology proficiencies. More specifically, this article describes…

  9. Two-Phase Technology at NASA/Johnson Space Center

    Science.gov (United States)

    Ungar, Eugene K.; Nicholson, Leonard S. (Technical Monitor)

    1999-01-01

    Since the baseline International Space Station (ISS) External Active Thermal Control System (EATCS) was changed from a two-phase mechanically pumped system to a single phase cascade system in the fall of 1993, two-phase EATCS research has continued at a low level at JSC. One of-the lessons of the ISS EATCS selection was that two-phase thermal control systems must have significantly lower power than comparable single phase systems to overcome their larger radiator area, larger line and fluid mass, and perceived higher technical risk. Therefore, research at JSC has concentrated on low power mechanically pumped two-phase EATCSs. In the presentation, the results of a study investigating the trade of single and two-phase mechanically pumped EATCSs for space vehicles will be summarized. The low power two-phase mechanically pumped EATCS system under development at JSC will be described in detail and the current design status of the subscale test unit will be reviewed. Also, performance predictions for a full size EATCS will be presented. In addition to the discussion of two-phase mechanically pumped EATCS development at JSC, two-phase technologies under development for biological water processing will be discussed. These biological water processor technologies are being prepared for a 2001 flight experiment and subsequent usage on the TransHab module on the International Space Station.

  10. Understanding Technology Literacy: A Framework for Evaluating Educational Technology Integration

    Science.gov (United States)

    Davies, Randall S.

    2011-01-01

    Federal legislation in the United States currently mandates that technology be integrated into school curricula because of the popular belief that learning is enhanced through the use of technology. The challenge for educators is to understand how best to teach with technology while developing the technological expertise of their students. This…

  11. Evaluating the Readiness of Iranian Research Centers in Knowledge Management

    Directory of Open Access Journals (Sweden)

    Nasrin D. Mamaghani

    2011-01-01

    Full Text Available Problem statement: Knowledge and its management are considered as a foundation for creating competitive advantages in organizations. Most of large companies have allocated plenty of resources to Knowledge Management (KM because they believe Knowledge and its management is a foundation for creating competitive advantages in organizations. However, implementing knowledge management projects in an organization requires essential organizational changes. The main purpose of this study was to explore KM success factors of Iranian research center to make a basis for evaluating the readiness of KM in them. Approach: In this study, success factors of knowledge management were extracted from literature review on papers represented between 1997 and 2009. Then the factors were categorized and effective and critical success factors in each group were determined. The results were validated and analyzed by a questionnaire through binomial test and approved by an expert panel. Results: The study revealed that KM success factors of Iranian research centers are: Knowledge strategy, management support, motivational encouragements to share knowledge, suitable technical infrastructure. It is obvious that continuous attention of management to these factors is vital for the success of knowledge management in organizations. Conclusions: Based on results, to improve current situation of KM in Iranian research center, KM and its benefits should be represented to managers to attract their support in organization. Then KM should be employed in strategic program of organization. Besides, implementing the projects of KM should be accompanied with reward and motivational systems to facilitate knowledge sharing and create proper organizational culture.

  12. Novel Method Of Preparing Vaccines | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    This invention from the NCI Cancer and Inflammation Program describes methods to prepare vaccines for the treatment of human immunodeficiency virus (HIV) infections. The National Cancer Institute's Cancer and Inflammation Program seeks parties interested in licensing or collaborative research to further develop, evaluate, or commercialize novel methods of preparing vaccines.

  13. Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

    Science.gov (United States)

    1999-01-01

    Center Director Roy Bridges stops to talk to one of the vendors at the Disability Awareness and Action Working Group (DAAWG) Technology Fair being held Oct. 20-21 at Kennedy Space Center. With him at the far left is Sterling Walker, director of Engineering Development at KSC and chairman of DAAWG, and Nancie Strott, a multi-media specialist with Dynacs and chairperson of the Fair; at the right is Carol Cavanaugh, with KSC Public Services. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

  14. Technology complementing military behavioral health efforts at tripler army medical center.

    Science.gov (United States)

    Stetz, Melba C; Folen, Raymond A; Yamanuha, Bronson K

    2011-06-01

    The purpose of this article is to provide a short narrative on the ways that behavioral health professionals and their patients are currently benefitting from the use of technology. Examples stem from applications of technology to patients/research participants at the Tripler Army Medical Center. The paper also discusses how current use of this technology has made it possible to serve individuals in their own cultural environment, providing a cost-effective means of providing mental health services.

  15. JPRS Report, Science & Technology, Japan, Key Tech Center Advanced Communications Research

    Science.gov (United States)

    2007-11-02

    information society . Today, information telecommunication systems are being networked through interconnections, and it is expected that such systems will play a leading role in the future flow of advanced information. Therefore in order to predict future technological developments, it is necessary to elucidate the themes of the development of communication technologies related both to network construction and administration, and to analyze user needs sufficiently. From this perspective, the Key Technology Center initiated its ’Research in Advanced Communications

  16. Improving consistency in student evaluation at affiliated family practice centers.

    Science.gov (United States)

    Rabinowitz, H K

    1986-01-01

    The Department of Family Medicine at Jefferson Medical College has since 1974 been successful in administering a required third-year family medicine clerkship, providing students with a structured, didactic, and experiential curriculum in six affiliated family practice centers. Prior analysis (1976-1981) had indicated, however, that variation existed in evaluating similar students, depending on the clerkship training site, i.e., three sites graded students in a significantly different fashion than the three other sites. Utilizing these data to focus on the evaluation process, a comprehensive and specific six-point plan was developed to improve consistency in evaluations at the different training sites. This plan consisted of a yearly meeting of affiliate faculty, assigning predoctoral training administrative responsibility to one faculty member at each training site, increased telephone communication, affiliate-faculty attendance at the university site evaluation session, faculty rotation to spend time at other training sites, and financial reimbursement to the affiliate training sites. After intervention, analysis (1981-1983) indicated that five of the six clerkship sites now grade students in a consistent fashion, with only one affiliate using different grading standards. The intervention was therefore judged to be successful for five of the six training sites, allowing for better communication and more critical and consistent evaluation of medical students.

  17. [Evaluation of family care delivered at a psychosocial care center].

    Science.gov (United States)

    Duarte, Maria de Lourdes Custódio; Kantorski, Luciane Prado

    2011-01-01

    This study aimed to evaluate qualitatively the care offered to families for a Center of Psychosocial Atention of type I, located in Southern Region of Brazil. The Dialectical hermeneutic circle was used as a technique of data collection, a method recommended by the Fourth Generation Evaluation proposed by Guba and Lincoln. Topics such as reception, family meetings, home visits and involvement of family emerged in interviews with family members of this health service. Interviews and observations were the techniques used to collect data. The way has been consolidated to care for families in services represents a challenge for health professionals, since it entails the restructuring and formation of a reflection of all the actors involved in this process of change.

  18. Progress of Covariance Evaluation at the China Nuclear Data Center

    Energy Technology Data Exchange (ETDEWEB)

    Xu, R., E-mail: xuruirui@ciae.ac.cn [China Nuclear Data Center, P.O. Box, 275(41), Beijing 102413 (China); Zhang, Q. [China Nuclear Data Center, P.O. Box, 275(41), Beijing 102413 (China); Shanxi Normal University, Linfen, Shanxi Province 041004 (China); Zhang, Y.; Liu, T.; Ge, Z.; Lu, H.; Sun, Z.; Yu, B. [China Nuclear Data Center, P.O. Box, 275(41), Beijing 102413 (China); Tang, G. [Peking University, Beijing 100871 (China)

    2015-01-15

    Covariance evaluations at the China Nuclear Data Center focus on the cross sections of structural materials and actinides in the fast neutron energy range. In addition to the well-known Least-squares approach, a method based on the analysis of the sources of experimental uncertainties is especially introduced to generate a covariance matrix for a particular reaction for which multiple measurements are available. The scheme of the covariance evaluation flow is presented, and an example of n+{sup 90}Zr is given to illuminate the whole procedure. It is proven that the accuracy of measurements can be properly incorporated into the covariance and the long-standing small uncertainty problem can be avoided.

  19. Lifetime-Aware Cloud Data Centers: Models and Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Luca Chiaraviglio

    2016-06-01

    Full Text Available We present a model to evaluate the server lifetime in cloud data centers (DCs. In particular, when the server power level is decreased, the failure rate tends to be reduced as a consequence of the limited number of components powered on. However, the variation between the different power states triggers a failure rate increase. We therefore consider these two effects in a server lifetime model, subject to an energy-aware management policy. We then evaluate our model in a realistic case study. Our results show that the impact on the server lifetime is far from negligible. As a consequence, we argue that a lifetime-aware approach should be pursued to decide how and when to apply a power state change to a server.

  20. Issues surrounding the health economic evaluation of genomic technologies

    Science.gov (United States)

    Buchanan, James; Wordsworth, Sarah; Schuh, Anna

    2014-01-01

    Aim Genomic interventions could enable improved disease stratification and individually tailored therapies. However, they have had a limited impact on clinical practice to date due to a lack of evidence, particularly economic evidence. This is partly because health economists are yet to reach consensus on whether existing methods are sufficient to evaluate genomic technologies. As different approaches may produce conflicting adoption decisions, clarification is urgently required. This article summarizes the methodological issues associated with conducting economic evaluations of genomic interventions. Materials & methods A structured literature review was conducted to identify references that considered the methodological challenges faced when conducting economic evaluations of genomic interventions. Results Methodological challenges related to the analytical approach included the choice of comparator, perspective and timeframe. Challenges in costing centered around the need to collect a broad range of costs, frequently, in a data-limited environment. Measuring outcomes is problematic as standard measures have limited applicability, however, alternative metrics (e.g., personal utility) are underdeveloped and alternative approaches (e.g., cost–benefit analysis) underused. Effectiveness data quality is weak and challenging to incorporate into standard economic analyses, while little is known about patient and clinician behavior in this context. Comprehensive value of information analyses are likely to be helpful. Conclusion Economic evaluations of genomic technologies present a particular challenge for health economists. New methods may be required to resolve these issues, but the evidence to justify alternative approaches is yet to be produced. This should be the focus of future work in this field. PMID:24236483

  1. A Rapid Usability Evaluation (RUE) Method for Health Information Technology.

    Science.gov (United States)

    Russ, Alissa L; Baker, Darrell A; Fahner, W Jeffrey; Milligan, Bryce S; Cox, Leeann; Hagg, Heather K; Saleem, Jason J

    2010-11-13

    Usability testing can help generate design ideas to enhance the quality and safety of health information technology. Despite these potential benefits, few healthcare organizations conduct systematic usability testing prior to software implementation. We used a Rapid Usability Evaluation (RUE) method to apply usability testing to software development at a major VA Medical Center. We describe the development of the RUE method, provide two examples of how it was successfully applied, and discuss key insights gained from this work. Clinical informaticists with limited usability training were able to apply RUE to improve software evaluation and elected to continue to use this technique. RUE methods are relatively simple, do not require advanced training or usability software, and should be easy to adopt. Other healthcare organizations may be able to implement RUE to improve software effectiveness, efficiency, and safety.

  2. The Scientific Data Management Center: Available Technologies and Highlights

    Energy Technology Data Exchange (ETDEWEB)

    Shoshani, Arie; Altintas, Ilkay; Chen, Jin; Chin, George; Choudhary, Alok; Crawl, Daniel; Critchlow, Terence J.; Gao, K.; Grimm, B.; Iyer, H.; Kamath, Chandrika; Khan, Ayla; Klasky, S.; Koehler, Sven; Lang, Rob; Latham, Robert J.; Li, J. W.; Liao, Wei-keng; Ligon, J.; Liu, Q.; Ludaescher, Bertram T.; Mouallem, Pierre; Nagappan, Mie; Podhorszki, Norbert; Ross, Rob; Rotem, Doron; Samatova, Nagiza F.; Silva, C.; Sim, A.; Tchoua, Roselynne; Thakur, R.; Vouk, M.; Wu, J.; Yu, Weikuan

    2011-09-30

    Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Furthermore, exploratory analysis requires techniques for efficiently selecting subsets of the data. Third, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration.

  3. The National Center of Evaluation for Higher Education (CENEVAL) and the External Evaluation of Mexican Education

    OpenAIRE

    Antonio Gago Huguet

    2000-01-01

    The National Center for the Evaluation of Higher Education (CENEVAL) has developed and set in motion a series of examinations which permits the evaluation of students when they complete their Bachelor’s level education. The General Examination for Bachelor’s Degree Graduates (EGEL) explores the essential knowledge and abilities required to begin professional practice. The claims in favor of applying the EGEL exam stand on its usefulness as an external evaluation instrument which permits s...

  4. The National Center of Evaluation for Higher Education (CENEVAL) and the External Evaluation of Mexican Education

    OpenAIRE

    Antonio Gago Huguet

    2000-01-01

    The National Center for the Evaluation of Higher Education (CENEVAL) has developed and set in motion a series of examinations which permits the evaluation of students when they complete their Bachelor’s level education. The General Examination for Bachelor’s Degree Graduates (EGEL) explores the essential knowledge and abilities required to begin professional practice. The claims in favor of applying the EGEL exam stand on its usefulness as an external evaluation instrument which permits s...

  5. VACET: Proposed SciDAC2 Visualization and Analytics Center forEnabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, W.; Johnson, Chris; Hansen, Charles; Parker, Steve; Sanderson, Allen; Silva, Claudio; Tricoche, Xavier; Pascucci, Valerio; Childs, Hank; Cohen, Jonathon; Duchaineau, Mark; Laney, Dan; Lindstrom,Peter; Ahern, Sean; Meredith, Jeremy; Ostrouchov, George; Joy, Ken; Hamann, Bernd

    2006-06-19

    This paper accompanies a poster that is being presented atthe SciDAC 2006 meeting in Denver, CO. This project focuses on leveragingscientific visualization and analytics software technology as an enablingtechnology for increasing scientific productivity and insight. Advancesincomputational technology have resultedin an "information big bang,"which in turn has createda significant data understanding challenge. Thischallenge is widely acknowledged to be one of the primary bottlenecks incontemporary science. The vision for our Center is to respond directly tothat challenge by adapting, extending, creating when necessary anddeploying visualization and data understanding technologies for ourscience stakeholders. Using an organizational model as a Visualizationand Analytics Center for Enabling Technologies (VACET), we are wellpositioned to be responsive to the needs of a diverse set of scientificstakeholders in a coordinated fashion using a range of visualization,mathematics, statistics, computer and computational science and datamanagement technologies.

  6. Evaluation of Warm-Mix Asphalt Technologies for Use on Airfield Pavements

    Science.gov (United States)

    2013-12-01

    Auburn, AL: National Center for Asphalt Technology. Cooley Jr., L. A. 2003. Evaluation of Pavement Permeability in Mississippi. Auburn, AL: National...ER D C/ G SL T R -1 2 -3 Evaluation of Warm-Mix Asphalt Technologies for Use on Airfield Pavements G eo te ch n ic al a n d S tr u ct...default. ERDC/GSL TR-12-3 February 2012 (Revised December 2013) Evaluation of Warm-Mix Asphalt Technologies for Use on Airfield Pavements

  7. Safety, Reliability, and Quality Assurance Provisions for the Office of Aeronautics, Exploration and Technology Centers

    Science.gov (United States)

    1991-01-01

    This Handbook establishes general safety, reliability, and quality assurance (SR&QA) guidelines for use on flight and ground-based projects conducted at the Ames, Langley, and Lewis Research Centers, hereafter identified as the Office of Aeronautics, Exploration and Technology (OAET) Centers. This document is applicable to all projects and operations conducted at these Centers except for those projects covered by more restrictive provisions such as the Space Shuttle, Space Station, and unmanned spacecraft programs. This Handbook is divided into two parts. The first (Chapters 1 and 2) establishes the SR&QA guidelines applicable to the OAET Centers, and the second (Appendices A, B, C, and D) provides examples and definitions for the total SR&QA program. Each center should implement SR&QA programs using these guidelines with tailoring appropriate to the special projects conducted by each Center. This Handbook is issued in loose-leaf form and will be revised by page changes.

  8. Savannah River Technology Center monthly report, November 1993

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, J.M.

    1993-11-01

    This paper contains brief summaries of work in the following five areas: (1) Tritium: Single bed loading status; Replacement Tritium Facility (RTF) technical issues tracking; RTF thermal cycling absorption process support; Metal hydride composites; and Effects of H{sub 2} isotopes on welded steels; (2) Separations: Optimization study; Tank 9.6 and 9.8 solution evaporation studies; F-Canyon and FB-Line restart issues; Hydrogen generation in Fb-Line process hold tanks; and Fb-Line basis for interim operation; (3) Environmental: Groundwater modeling; Microbiology support; Analysis of samples from old F-area seepage basin; Electrokinetic migration; List of constituents of concern for metallurgical laboratory seepage basin; TNX groundwater treatability study support; Silver saddles; CRADA; Magnetic-separation demonstration support; Six phase heating; Ion trap mass spectrometer development; and Mobile bioreactor system; (4) Waste management: WSRC and Westinghouse Hanford Company pump development program; High-level waste vitrification government owned company operated meeting; High-level waste simulation package; Initial screening of site waste for vitrification; and Offgas components test facility startup; (5) General: SRTC basis for interim operation; Project management integration and costing system implementation within SRTC; Shipping container recertification; Update to materials consultation operating procedure; Material evaluation support for 484-D boiler refurbishment; and Welding irradiated stainless steel.

  9. Dynamics of center-periphery patterns in knowledge networks - the case of China's biotech science and technology system

    CERN Document Server

    Hennemann, Stefan; Liefner, Ingo

    2011-01-01

    Science and technology systems - and their epistemic communities - are usually hierarchical and composed of a number of strong, large, leading organizations, along with a number of smaller and less influential ones. Moreover, these hierarchical patterns have a spatial structure: the leading organizations are concentrated in a few places, creating a science and technology center, whereas the majority of locations are peripheral. In the example of biotech research in China, we found dynamic changes in center-periphery patterns. These results are based on a network analysis of evolving co-authorship networks from 2001 to 2009 that were built combining national and international databases. Therefore, our results are not only relevant for evaluating the spatial structure and dynamics in the Chinese biotech system and its integration into the global knowledge network, but also revive a discussion on persistence and processes of change in the systems theory for sciencebased industries.

  10. Evaluation of Reference Centers for Special Immunobiologicals implementation.

    Science.gov (United States)

    Nóbrega, Laura Andrade Lagôa; Novaes, Hillegonda Maria Dutilh; Sartori, Ana Marli Christovam

    2016-09-01

    To describe the Reference Centers for Special Immunobiologicals and evaluate their implementation considering formal regulations. We conducted a program evaluation, of evaluative research type. From August 2011 to January 2012, a questionnaire was applied to the 42 Reference Centers for Special Immunobiologicals existing in the Country, approaching the structure, human resources, and developed activities dimensions. We conducted a descriptive analysis of data and used a clustering for binary data with the squared Euclidean distance, by the farthest neighbor method, to aggregate services with similar features. We observed great diversity among the services in the three dimensions. The clustering resulted in five service profiles, named according to their characteristics. 1) Best structure: 12 Reference Centers for Special Immunobiologicals with the highest proportion of services with the minimum of rooms recommended, purpose-built vaccine refrigerators, preventive maintenance of the cold chain, and oxygen source. 2) Immunobiologicals distributor: six Reference Centers for Special Immunobiologicals that distributed more than applied immunogens; no doctor present for more than half of the working hours and no purpose-built vaccine refrigerators . 3) Incipient implementation: five Reference Centers for Special Immunobiologicals with inadequate structure, such as absence of purpose-built vaccine refrigerators, preventive maintenance of the cold chain and oxygen source; none had computer. 4) Vaccination rooms: 13 Reference Centers for Special Immunobiologicals, everyone did routine immunization, most participated in vaccination campaigns. 5) Teaching and research: six services, all inserted into teaching hospitals, developed researches and received trainees; most had doctors in more than half of the working hours. The evaluation of the Reference Centers for Special Immunobiologicals implementation was based on the profiles found and considered the official regulations

  11. Informal Evaluation and Institutionalization of Neoteric Technology Ideas

    DEFF Research Database (Denmark)

    Ulrich, Frank; Mengiste, Shegaw Anagaw; Müller, Sune Dueholm

    2015-01-01

    institutionalized technologies during their informal evaluation and sensemaking of these ideas. Moreover, we suggest that conflicts between competing frames of reference during this evaluation may result in the rejection, adoption, or multiplication of new technology ideas. Drawing on Information Systems (IS) based...... theories of creativity, Scandinavian institutionalism, and empirical data from two Danish organizations, this article investigates the interplay between creativity, technology, and human sensemaking in the process of translating and transforming technology ideas into full-fledged technological innovations....

  12. The feasibility of a unified role for NASA regional dissemination centers and technology application teams

    Science.gov (United States)

    1974-01-01

    Insights and recommendations arising from a study of the feasibility of combining the NASA Regional Dissemination Center (RDC) and Technology Application Team (Tateam) roles to form Regional Application Centers (RADC's) are presented. The apparent convergence of the functions of RDC's and Tateams is demonstrated and strongly supportive of the primary recommendation that an applications function be added to those already being performed by the RDC's. The basis of a national network for technology transfer and public and private sector problem solving is shown to exist, the skeleton of which is an interactive network of Regional Application Centers and NASA Field Centers. The feasibility of developing and extending this network is considered and the detailed ramifications of so doing are discussed and the imperatives emphasized. It is hypothesized that such a national network could become relatively independent of NASA funding within five years.

  13. 76 FR 45268 - Center for Drug Evaluation and Research, Approach to Addressing Drug Shortage; Public Workshop

    Science.gov (United States)

    2011-07-28

    ... HUMAN SERVICES Food and Drug Administration Center for Drug Evaluation and Research, Approach to... approach of the Center for Drug Evaluation and Research (CDER) to addressing drug shortages. This public... Benner, Center for Drug Evaluation and Research, Food and Drug Administration, 10903 New Hampshire...

  14. SciDAC Visualization and Analytics Center for EnablingTechnology

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E. Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci,Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

    2006-11-28

    The SciDAC2 Visualization and Analytics Center for EnablingTechnologies (VACET) began operation on 10/1/2006. This document, dated11/27/2006, is the first version of the VACET project management plan. Itwas requested by and delivered to ASCR/DOE. It outlines the Center'saccomplishments in the first six weeks of operation along with broadobjectives for the upcoming future (12-24 months).

  15. SciDAC Visualization and Analytics Center for EnablingTechnology

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E. Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci,Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

    2006-11-28

    The SciDAC2 Visualization and Analytics Center for EnablingTechnologies (VACET) began operation on 10/1/2006. This document, dated11/27/2006, is the first version of the VACET project management plan. Itwas requested by and delivered to ASCR/DOE. It outlines the Center'saccomplishments in the first six weeks of operation along with broadobjectives for the upcoming future (12-24 months).

  16. Introducing Nagasaki Coal Mining Technology Training Center owned by the Mitsui Matsushima Resources Co., Ltd.

    Energy Technology Data Exchange (ETDEWEB)

    Kumakawa, K. [Mitsui Matsushima Resources Co., Ltd. (Japan)

    2006-09-15

    The Nagasaki Coal Mine Technology Training Center was established as a facility for 'The Training Project' on coal mine technology following the purchase of part of the mining area owned by the Matsushima Coal Mine which was closed in November 2001. The Training Center is located seaward at Ikeshima approximately 7 km west of the Nishisonogi Peninsula's western coast. Training is provided to personnel from Vietnam and Indonesia in subjects ranging from underground mining safety, exploration surveying and rock drivage, to electrical engineering. 3 figs., 4 tabs.

  17. SciDAC Visualization and Analytics Center for EnablingTechnologies

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E. Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci,Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jermey; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier.

    2007-06-30

    The Visualization and Analytics Center for EnablingTechnologies (VACET) focuses on leveraging scientific visualization andanalytics software technology as an enabling technology for increasingscientific productivity and insight. Advances in computational technologyhave resulted in an 'information big bang,' which in turn has created asignificant data understanding challenge. This challenge is widelyacknowledged to be one of the primary bottlenecks in contemporaryscience. The vision of VACET is to adapt, extend, create when necessary,and deploy visual data analysis solutions that are responsive to theneeds of DOE'scomputational and experimental scientists. Our center isengineered to be directly responsive to those needs and to deliversolutions for use in DOE's large open computing facilities. The researchand development directly target data understanding problems provided byour scientific application stakeholders. VACET draws from a diverse setof visualization technology ranging from production quality applicationsand application frameworks to state-of-the-art algorithms forvisualization, analysis, analytics, data manipulation, and datamanagement.

  18. The development and technology transfer of software engineering technology at NASA. Johnson Space Center

    Science.gov (United States)

    Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

    1992-01-01

    The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

  19. 76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

    Science.gov (United States)

    2011-01-12

    ... Programs Staff, Detroit, MI; UAW-Chrysler Technical Training Center Technology Training Joint Programs... Technology Training Joint Programs Staff; and the criteria set forth in Section 222(a) has been met. During...-Chrysler National Training Center, Technology Training Joint Programs Staff, Detroit, Michigan, and...

  20. Study on evaluation system of high & new technology superior enterprises

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    With the globalization of economy and science & technology, high & new technology enterprises have become the point of Chinese economic growth and the important basis for constructing innovative country. By analyzing the characteristics of high & new technology superior enterprises and the influential factors, the evaluation index and method based on Grey Relation Analysis are designed. Some high & new technology enterprises in Heilongjiang province are evaluated and application tactics of evaluation system are proposed. This study provides scientific method and basis for government to obtain development state about high & new technology enterprises and design planning and policies of high & new technology industry.

  1. Final Report for "Center for Technology for Advanced Scientific Component Software"

    Energy Technology Data Exchange (ETDEWEB)

    Svetlana Shasharina

    2010-12-01

    The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

  2. Development of a National Center for Hydrogen Technology. A Summary Report of Activities Completed at the National Center for Hydrogen Technology - Year 6

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Michael [Univ. of North Dakota, Grand Forks, ND (United States)

    2012-08-01

    The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology (NCHT) since 2005 under a Cooperative Agreement with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research on hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding for hydrogen-related projects ($24 million for projects in the NCHT, which includes federal and corporate partner development funds) involving more than 85 partners (27 with the NCHT). The NCHT Program's nine activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan that refers to realistic testing of technologies at adequate scale, process intensification, and contaminant control. A number of projects have been completed that range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in Year 6 of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

  3. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Rogers, Adam Zachary; Simmons, R. F.; Palethorpe, S. J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  4. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program, FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; Rogers, A.Z.; McCray, J.A.; Simmons, R.F.; Palethorpe, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  5. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai; Hinckley, Steve Harold

    1999-10-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.

  6. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    A. K. Herbst; J. A. McCray; R. J. Kirkham; J. Pao; S. H. Hinckley

    1999-09-30

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.

  7. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-2000 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai; Argyle, Mark Don; Lauerhass, Lance; Bendixsen, Carl Lee; Hinckley, Steve Harold

    2000-11-01

    The Low-Activity Waste Process Technology Program anticipated that grouting will be used for disposal of low-level and transuranic wastes generated at the Idaho Nuclear Technology Engineering Center (INTEC). During fiscal year 2000, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed using silica gel and other absorbents to solidify sodium-bearing wastes. A feasibility study and conceptual design were completed for the construction of a grout pilot plant for simulated wastes and demonstration facility for actual wastes.

  8. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-2000 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; McCray, J.A.; Kirkham, R.J.; Pao, J.; Argyle, M.D.; Lauerhass, L.; Bendixsen, C.L.; Hinckley, S.H.

    2000-10-31

    The Low-Activity Waste Process Technology Program anticipated that grouting will be used for disposal of low-level and transuranic wastes generated at the Idaho Nuclear Technology Engineering Center (INTEC). During fiscal year 2000, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed using silica gel and other absorbents to solidify sodium-bearing wastes. A feasibility study and conceptual design were completed for the construction of a grout pilot plant for simulated wastes and demonstration facility for actual wastes.

  9. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center, 2

    Science.gov (United States)

    Gold, H. C. (Editor); Moore, A. M.; Dodd, B.; Dittmar, V.

    1971-01-01

    The clientele served by the Technology Use Studies Center (TUSC) is updated. Manufacturing leads the list of client firms. The standard industrial classification (SIC) range of these firms is broad. Substantial numbers of college and university faculties are using TUSC services. Field operations inherent in the functions of dissemination and assistance are reviewed. Increasing emphasis among clientele is on environmental concerns and management. A record is provided of the institutions contacted and the extent of TUSC involvement with them, as well as TUSC's cooperation with agencies and organizations. The impact of TUSC and the NASA-sponsored Technology Utilization Program on other public agencies is discussed.

  10. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program, FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; Rogers, A.Z.; McCray, J.A.; Simmons, R.F.; Palethorpe, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  11. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; McCray, J.A.; Rogers, A.Z.; Simmons, R.F.; Palethrope, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  12. A cost evaluation methodology for surgical technologies.

    Science.gov (United States)

    Ismail, Imad; Wolff, Sandrine; Gronfier, Agnes; Mutter, Didier; Swanström, Lee L; Swantröm, Lee L

    2015-08-01

    To create and validate a micro-costing methodology that surgeons and hospital administrators can use to evaluate the cost of implementing innovative surgical technologies. Our analysis is broken down into several elements of fixed and variable costs which are used to effectively and easily calculate the cost of surgical operations. As an example of application, we use data from 86 robot assisted gastric bypass operations made in our hospital. To validate our methodology, we discuss the cost reporting approaches used in 16 surgical publications with respect to 7 predefined criteria. Four formulas are created which allow users to import data from their health system or particular situation and derive the total cost. We have established that the robotic surgical system represents 97.53 % of our operating room's medical device costs which amounts to $4320.11. With a mean surgery time of 303 min, personnel cost per operation amounts to $1244.73, whereas reusable instruments and disposable costs are, respectively, $1539.69 and $3629.55 per case. The literature survey demonstrates that the cost of surgery is rarely reported or emphasized, and authors who do cover this concept do so with variable methodologies which make their findings difficult to interpret. Using a micro-costing methodology, it is possible to identify the cost of any new surgical procedure/technology using formulas that can be adapted to a variety of operations and healthcare systems. We hope that this paper will provide guidance for decision makers and a means for surgeons to harmonise cost reporting in the literature.

  13. ECONOMIC EVALUATION OF CO2 SEQUESTRATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Bert R. Bock; Richard G. Rhudy; David E. Nichols

    2001-07-01

    In order to plan for potential CO{sub 2} mitigation mandates, utilities need better information on CO{sub 2} mitigation options, especially carbon sequestration options that involve non-utility operations. One of the major difficulties in evaluating CO{sub 2} sequestration technologies and practices, both geologic storage of captured CO{sub 2} and storage in biological sinks, is obtaining consistent, transparent, accurate, and comparable economics. This project is comparing the economics of major technologies and practices under development for CO{sub 2} sequestration, including captured CO{sub 2} storage options such as active oil reservoirs, depleted oil and gas reservoirs, deep aquifers, coal beds, and oceans, as well as the enhancement of biological sinks such as forests and croplands. An international group of experts has been assembled to compare on a consistent basis the economics of this diverse array of CO{sub 2} sequestration options. Designs and data collection are nearly complete for each of the CO{sub 2} sequestration options being compared. Initial spreadsheet development has begun on concepts involving storage of captured CO{sub 2}. No significant problems have been encountered, but some additional outside expertise will be accessed to supplement the team's expertise in the areas of life cycle analysis, oil and gas exploration and production, and comparing CO{sub 2} sequestration options that differ in timing and permanence of CO{sub 2} sequestration. Plans for the next reporting period are to complete data collection and a first approximation of the spreadsheet. We expect to complete this project on time and on budget.

  14. ARCTIC FOUNDATIONS, INC. FREEZE BARRIER TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Arctic Foundations, Inc. (AFI), of Anchorage, Alaska has developed a freeze barrier technology designed to prevent the migration of contaminants in groundwater by completely isolating contaminant source areas until appropriate remediation techniques can be applied. With this tech...

  15. Assessment techniques for a learning-centered curriculum: evaluation design for adventures in supercomputing

    Energy Technology Data Exchange (ETDEWEB)

    Helland, B. [Ames Lab., IA (United States); Summers, B.G. [Oak Ridge National Lab., TN (United States)

    1996-09-01

    As the classroom paradigm shifts from being teacher-centered to being learner-centered, student assessments are evolving from typical paper and pencil testing to other methods of evaluation. Students should be probed for understanding, reasoning, and critical thinking abilities rather than their ability to return memorized facts. The assessment of the Department of Energy`s pilot program, Adventures in Supercomputing (AiS), offers one example of assessment techniques developed for learner-centered curricula. This assessment has employed a variety of methods to collect student data. Methods of assessment used were traditional testing, performance testing, interviews, short questionnaires via email, and student presentations of projects. The data obtained from these sources have been analyzed by a professional assessment team at the Center for Children and Technology. The results have been used to improve the AiS curriculum and establish the quality of the overall AiS program. This paper will discuss the various methods of assessment used and the results.

  16. Hardware-in-the-loop simulation technology of wide-band radar targets based on scattering center model

    Institute of Scientific and Technical Information of China (English)

    Huang Hao; Pan Minghai; Lu Zhijun

    2015-01-01

    Hardware-in-the-loop (HWIL) simulation technology can verify and evaluate the radar by simulating the radio frequency environment in an anechoic chamber. The HWIL simulation technology of wide-band radar targets can accurately generate wide-band radar target echo which stands for the radar target scattering characteristics and pulse modulation of radar transmitting sig-nal. This paper analyzes the wide-band radar target scattering properties first. Since the responses of target are composed of many separate scattering centers, the target scattering characteristic is restructured by scattering centers model. Based on the scattering centers model of wide-band radar target, the wide-band radar target echo modeling and the simulation method are discussed. The wide-band radar target echo is reconstructed in real-time by convoluting the transmitting signal to the target scattering parameters. Using the digital radio frequency memory (DRFM) system, the HWIL simulation of wide-band radar target echo with high accuracy can be actualized. A typical wide-band radar target simulation is taken to demonstrate the preferable simulation effect of the reconstruction method of wide-band radar target echo. Finally, the radar target time-domain echo and high-resolution range profile (HRRP) are given. The results show that the HWIL simulation gives a high-resolution range distribution of wide-band radar target scattering centers.

  17. An Evaluation of Enhanced Geothermal Systems Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jelacic, Allan [U.S. Dept. of Energy, Washington, DC (United States); Fortuna, Raymond [U.S. Dept. of Energy, Washington, DC (United States); LaSala, Raymond [U.S. Dept. of Energy, Washington, DC (United States); Nathwani, Jay [U.S. Dept. of Energy, Washington, DC (United States); Nix, Gerald [U.S. Dept. of Energy, Washington, DC (United States); Visser, Charles [National Renewable Energy Lab. (NREL), Golden, CO (United States); Green, Bruce [National Renewable Energy Lab. (NREL), Golden, CO (United States); Renner, Joel [Idaho National Lab. (INL), Idaho Falls, ID (United States); Blankenship, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennedy, Mack [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bruton, Carol [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2008-04-01

    This 2008 document presents the results of an eight-month study by the Department of Energy (DOE) and its support staff at the national laboratories concerning the technological requirements to commercialize a new geothermal technology, Enhanced Geothermal Systems (EGS).

  18. Military aircraft and missile technology at the Langley Research Center: A selected bibliography

    Science.gov (United States)

    Maddalon, D. V.

    1980-01-01

    A compilation of reference material is presented on the Langley Research Center's efforts in developing advanced military aircraft and missile technology over the past twenty years. Reference material includes research made in aerodynamics, performance, stability, control, stall-spin, propulsion integration, flutter, materials, and structures.

  19. Research and technology activities at Ames Research Center's Biomedical Research Division

    Science.gov (United States)

    Martello, N.

    1985-01-01

    Various research and technology activities at Ames Research Center's Biomedical Research Division are described. Contributions to the Space Administration's goals in the life sciences include descriptions of research in operational medicine, cardiovascular deconditioning, motion sickness, bone alterations, muscle atrophy, fluid and electrolyte changes, radiation effects and protection, behavior and performance, gravitational biology, and life sciences flight experiments.

  20. The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Nicholi S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-28

    The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

  1. Technology Can Help Young Children Succeed. PACER Center ACTion Information Sheets: PHP-c70

    Science.gov (United States)

    PACER Center, 2014

    2014-01-01

    Parents of young children with disabilities are discovering that carefully selected computer software and mobile apps can provide many benefits such as improved self-esteem, a longer attention span, and inclusion among family and other children that help their children succeed at home and in school. PACER's Simon Technology Center (STC) can help…

  2. NASA Lewis Research Center low-gravity fluid management technology program

    Science.gov (United States)

    Aydelott, J. C.; Carney, M. J.; Hochstein, J. I.

    1985-01-01

    A history of the Lewis Research Center in space fluid management technology program is presented. Current programs which include numerical modeling of fluid systems, heat exchanger/radiator concept studies, and the design of the Cryogenic Fluid Management Facility are discussed. Recent analytical and experimental activities performed to support the Shuttle/Centaur development activity are highlighted.

  3. Calcined Waste Storage at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    M. D. Staiger

    2007-06-01

    This report provides a quantitative inventory and composition (chemical and radioactivity) of calcined waste stored at the Idaho Nuclear Technology and Engineering Center. From December 1963 through May 2000, liquid radioactive wastes generated by spent nuclear fuel reprocessing were converted into a solid, granular form called calcine. This report also contains a description of the calcine storage bins.

  4. Technology Can Help Young Children Succeed. PACER Center ACTion Information Sheets: PHP-c70

    Science.gov (United States)

    PACER Center, 2014

    2014-01-01

    Parents of young children with disabilities are discovering that carefully selected computer software and mobile apps can provide many benefits such as improved self-esteem, a longer attention span, and inclusion among family and other children that help their children succeed at home and in school. PACER's Simon Technology Center (STC) can help…

  5. Mode 2 in action. Working across sectors to create a Center for Humanities and Technology

    NARCIS (Netherlands)

    Wyatt, S.M.E.

    2015-01-01

    This article examines recent developments in Amsterdam to establish a Center for Humanities and Technology (CHAT). The project is a collaboration between public research institutions and a private partner. To date, a White Paper has been produced that sets out a shared research agenda addressing bot

  6. Technology and Student Learning: Toward a Learner-Centered Teaching Model

    Science.gov (United States)

    Keengwe, Jared; Onchwari, Grace; Onchwari, Jacqueline

    2009-01-01

    There is need to reform teacher education programs through the creation of active learning environments that support and improve the depth and scope of student learning. Specifically, teachers should provide intellectually powerful, learner-centered, and technology-rich environments for students without undermining sound pedagogical practices.…

  7. Development of a national center for hydrogen technology. A summary report of activities completed at the national center hydrogen technology from 2005 to 2010

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Michael J. [Univ. of North Dakota, Grand Forks, ND (United States)

    2011-06-01

    The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology® (NCHT®) since 2005 under a Cooperative Agreement with the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research of hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding of hydrogen-related projects ($20 million for the NCHT project which includes federal and corporate development partner funds) involving more than 85 partners (27 with the NCHT). The NCHT project's 19 activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan. A number of projects have been completed which range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified to transportation-grade quality in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in the first 5 years of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

  8. Evaluation of Smart Gun Technologies preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1996-01-01

    The Smart Gun Technology Project has a goal to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing {open_quote}smart{close_quote} technologies. Smart technologies are those that can in some manner identify an officer. This report will identify, describe, and grade various technologies as compared to the requirements that were obtained from officers. This report does not make a final recommendation for a smart gun technology, nor does it give the complete design of a smart gun system.

  9. Relative risk site evaluations for Yakima Training Center

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R.M.; Whelan, G.

    1996-11-01

    All 20 U.S. Army Yakima Training Center (YTC) sites evaluated were given a `low` relative risk. At Solid Waste Management Unit (SWMU) 22, a `minimum` soils contaminant hazard factor was assigned even though 6,700 mg/kg TPH-diesel was found in surface soil. SWMU 22 is physically located on top of and with the fence surrounding Area of Concern (AOC) 4. Because the diesel is most likely associated with AOC 4, and plans are to clean up AOC 4, any further actions regarding these contaminated soils should be addressed as part of the planned actions for AOC 4. Contaminant hazard factors of `moderate` were assigned to the soil pathway for SWMUs 4 and 7 because dieldrin and arsenic, respectively, were found in surface soil samples at concentrations exceeding standards. A `moderate` contaminant hazard factor was also assigned to the sediment pathway for AOC 1 because arsenic detected in sediments in `Larry`s Swimming Pool` exceeded the standard. All other contaminant hazard factors were rated as minimal. The receptor factor for all sites and pathways was rated `limited,` except for SWMU 54 in which the groundwater receptor factor was rated `potential.` A `potential` rating was assigned to the groundwater pathway at this site to be conservative. The site is located on the south side of the syncline axis where the unconfined aquifer may be present and there are no monitoring wells at the site to confirm or deny the presence of groundwater contamination.

  10. Review of ultra-high density optical storage technologies for big data center

    Science.gov (United States)

    Hao, Ruan; Liu, Jie

    2016-10-01

    In big data center, optical storage technologies have many advantages, such as energy saving and long lifetime. However, how to improve the storage density of optical storage is still a huge challenge. Maybe the multilayer optical storage technology is the good candidate for big data center in the years to come. Due to the number of layers is primarily limited by transmission of each layer, the largest capacities of the multilayer disc are around 1 TB/disc and 10 TB/ cartridge. Holographic data storage (HDS) is a volumetric approach, but its storage capacity is also strictly limited by the diffractive nature of light. For a holographic disc with total thickness of 1.5mm, its potential capacities are not more than 4TB/disc and 40TB/ cartridge. In recent years, the development of super resolution optical storage technology has attracted more attentions. Super-resolution photoinduction-inhibition nanolithography (SPIN) technology with 9 nm feature size and 52nm two-line resolution was reported 3 years ago. However, turning this exciting principle into a real storage system is a huge challenge. It can be expected that in the future, the capacities of 10TB/disc and 100TB/cartridge can be achieved. More importantly, due to breaking the diffraction limit of light, SPIN technology will open the door to improve the optical storage capacity steadily to meet the need of the developing big data center.

  11. Improving early cycle economic evaluation of diagnostic technologies

    NARCIS (Netherlands)

    Steuten, Lotte M.G.; Ramsey, Scott D.

    2014-01-01

    The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to increa

  12. The National Center of Evaluation for Higher Education (CENEVAL and the External Evaluation of Mexican Education

    Directory of Open Access Journals (Sweden)

    Antonio Gago Huguet

    2000-11-01

    Full Text Available The National Center for the Evaluation of Higher Education (CENEVAL has developed and set in motion a series of examinations which permits the evaluation of students when they complete their Bachelor’s level education. The General Examination for Bachelor’s Degree Graduates (EGEL explores the essential knowledge and abilities required to begin professional practice. The claims in favor of applying the EGEL exam stand on its usefulness as an external evaluation instrument which permits students and institutions to verify efficacy and achievement in accordance to national standards. The evaluation of graduates with the EGEL complements the universities’ own certification of students. The preceding allows the author to propose that in the immediate future, there be established standards in the educational institutions or laws in the country supporting the double evaluation of graduates: one internal, applied by their own higher education institution (HEI; and another external, conducted by joint bodies (government, professional bodies, specialized agencies, etc...

  13. IITRI RADIO FREQUENCY HEATING TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    IITRI's patented in situ RFH technology enhances the removal of volatile and semi-volatile organics by soil vapor extraction (SVE). Electromagnetic energy heats the soil resulting in increased contaminant vapor pressures and potentially higher soil permeability. RFH heats soil us...

  14. INNOVATIVE TECHNOLOGY EVALUATION REPORT: RADIO FREQUENCY HEATING, KAI TECHNOLOGIES, INC.

    Science.gov (United States)

    A demonstration of KAI Technologies in-situ radio frequency heating system for soil treatment was conducted from January 1994 to July 1994 at Kelly Air Force Base in San Antonio, Texas. This demonstration was conducted as a joint effort between the USEPA and the USAF. The technol...

  15. MATRIX PHOTOCATALYTIC, INC. PHOTOCATALYTIC OXIDATION TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Matrix Technology involves the exposure of titanium dioxide (Ti02) particles to ultraviolet light (UV). The Ti02 is activated by UV light to produce high oxidizing hydroxyl radicals. Maxtrix also uses hydrogen peroxide (H202) and ozone (03) to enhance the treatment systems p...

  16. DYNAPHORE, INC. FORAGER™ SPONGE TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Forager™ Sponge is an open-celled cellulose sponge incorporating an amine-containing chelating polymer that selectively absorbs dissolved heavy metals from aqueous waste streams. The Developer states that the technology can be utilized to remove and concentrate heavy metals f...

  17. IITRI RADIO FREQUENCY HEATING TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    IITRI's patented in situ RFH technology enhances the removal of volatile and semi-volatile organics by soil vapor extraction (SVE). Electromagnetic energy heats the soil resulting in increased contaminant vapor pressures and potentially higher soil permeability. RFH heats soil us...

  18. High speed technology development and evaluation

    Science.gov (United States)

    Parker, D. R.; Brown, E. R.; Dickson, J. F.

    1986-10-01

    Semiconductor technology suited to high on-board data handling rates was investigated. Very high speed discrete logic and high speed gate arrays; single chip digital signal processors and single chip floating point processing peripherals; and analog CCD technologies and custom designed CCD chips for synthetic aperture radar applications were assessed. The 2 micron CMOS technology is highly reliable, supporting semicustom design techniques. Process JGC, the CCD technology, is highly reliable except for tolerance to ionizing radiation. Reliability of the ECL 16-bit serial-parallel parallel-serial converter junction isolated bipolar process, process WZA, is compromised by a design error and oxide contamination contributing to high leakage levels. The bipolar circuit is tolerant to an ionizing radiation of 20kRad. Step stress environmental testing to 200 C produces no failures in CMOS and CCD technologies, but accelerates the degradation of the oxide contaminated bipolar process. All technologies are susceptible to single event upsets.

  19. Patient-centered applications: use of information technology to promote disease management and wellness. A white paper by the AMIA knowledge in motion working group.

    Science.gov (United States)

    Demiris, George; Afrin, Lawrence B; Speedie, Stuart; Courtney, Karen L; Sondhi, Manu; Vimarlund, Vivian; Lovis, Christian; Goossen, William; Lynch, Cecil

    2008-01-01

    Advances in information technology (IT) enable a fundamental redesign of health care processes based on the use and integration of electronic communication at all levels. New communication technologies can support a transition from institution centric to patient-centric applications. This white paper defines key principles and challenges for designers, policy makers, and evaluators of patient-centered technologies for disease management and prevention. It reviews current and emerging trends; highlights challenges related to design, evaluation, reimbursement and usability; and reaches conclusions for next steps that will advance the domain.

  20. HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

  1. Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

    Science.gov (United States)

    1999-01-01

    Center Director Roy Bridges stops to pet one of the dogs that serves with Canine Companions for Independence, a vendor displaying its capabilities at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Standing at the right is Carol Cavanaugh, with KSC Public Services; behind Bridges is Nancie Strott (left), a multi-media specialist with Dynacs and chairperson of the Fair, and Sterling Walker (right), director of Engineering Development and chairman of DAAWG. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the other vendors participating are Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

  2. Evaluation of Ski Center Services in Greece based on the Multiattribute Measurement Model of Attitudes

    Directory of Open Access Journals (Sweden)

    Theophilos Masmanidis

    2006-01-01

    Full Text Available The scope of this study was to evaluate ski center services in Greece. Our research sample consists of n=1,614 visitors in 11 of the largest ski centers in Greece. The 22-item SERVQUAL standard questionnaire has been used, with each item classified based on five quality-assessment dimensions. In order to assess ski center offered services, the Multiattribute Attitude Measurement Model has been used. The values gathered by applying this model were used as reference values for ski center evaluation. Ski centers have then been ranked based on their total attitude score. The paper provides administrative suggestions on improving center offered services.

  3. Completion of Green Building by Korea Institute of Energy Research - Energy{center_dot}Conservation{center_dot}Environmental Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Dong [Korea Institute of Energy Research, Taejon (Korea)

    2001-04-01

    Korea Institute of Energy Research (KIER), which was fully aware that the effective utilization of energy could not only save energy but also reduce the environmental pollution due to a combustion exhaust gas, has built and operated 'the Ultra Energy Saving Building' whose energy consumption was only a fifth of general buildings as a example. KIER has started to research the project for the technology development and spread of Green Building in 'Enertech 21' - the most important research program of 1994 year - and has constructed the central building of the Institute with only the current available technology since the early of 1997 year, via researches by a step. Finally, KIER held the ceremony for the completion of Green Building in March sixth. This building is not just the first green building in Korea but also the representative building of energy environment research center, which will be marked out for a model for the domestic construction and construction industry in future. Therefore, this building has functions of exhibition, publicity, education, and experimentation for the building researchers as well as the office and researching place that is original function of this building. 4 figs., 5 tabs.

  4. SLJ's Technology Survey 2006: New Technologies--Like Blogs and Wikis--Are Taking Their Place in the School Media Center

    Science.gov (United States)

    Brewer, Sally; Milam, Peggy

    2006-01-01

    This article presents findings from the School Library Journal's 2006 national technology survey that investigated the trend in today's library media centers. As this study demonstrates, technology continues to be a significant aspect of K-12 media centers. Despite restricted funding and schedules stretched to the limit, media specialists have…

  5. Accelerated Adoption of Advanced Health Information Technology in Beacon Community Health Centers.

    Science.gov (United States)

    Jones, Emily; Wittie, Michael

    2015-01-01

    To complement national and state-level HITECH Act programs, 17 Beacon communities were funded to fuel community-wide use of health information technology to improve quality. Health centers in Beacon communities received supplemental funding. This article explores the association between participation in the Beacon program and the adoption of electronic health records. Using the 2010-2012 Uniform Data System, trends in health information technology adoption among health centers located within and outside of Beacon communities were explored using differences in mean t tests and multivariate logistic regression. Electronic health record adoption was widespread and rapidly growing in all health centers, especially quality improvement functionalities: structured data capture, order and results management, and clinical decision support. Adoption lagged for functionalities supporting patient engagement, performance measurement, care coordination, and public health. The use of advanced functionalities such as care coordination grew faster in Beacon health centers, and Beacon health centers had 1.7 times higher odds of adopting health records with basic safety and quality functionalities in 2010-2012. Three factors likely underlie these findings: technical assistance, community-wide activation supporting health information exchange, and the layering of financial incentives. Additional technical assistance and community-wide activation is needed to support the use of functionalities that are currently lagging. © Copyright 2015 by the American Board of Family Medicine.

  6. Implementation of efficient technologies application center; Implantacao de um centro de aplicacao de tecnologias eficientes

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Reynaldo S. da; Aguiar, Joao C.R.; Pinto Junior, Ary V.; Souza, Hamilton M. [Centro de Pesquisas de Energia Eletrica, Rio de Janeiro, RJ (Brazil). Programa de Sistemas de Distribuicao e Uso Eficiente de Energia Eletrica

    1997-12-31

    This paper describes the basic concept and the main activities at the Electric Technology Application Center (ETAC) placed at CEPEL. The aim of the center is presented, regarding issues such as: energy waste preventing, energy-efficient production processes and environmental protection. This work also presents the initial partnerships and the first ETAC products, according to three main areas: Industrial Commercial and Residential. (author) 3 refs., 1 fig., 1 tab.; e-mail: cref at fund.cepel.br; sigiliao at fund.cepel.br

  7. Evaluation of nitrate and nitrite destruction/separation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, D.T.

    1997-08-29

    This report describes and evaluates four types of nitrate and nitrite destruction and separation technologies that could be used to treat the aqueous, alkaline, nitrate-bearing mixed waste that is generated by the In-Tank Precipitation (ITP) process at the Savannah River Site (SRS). The technologies considered in this report include thermal, hydrothermal, chemical, and electrochemical technologies.

  8. Technology Foundations for Computational Evaluation of Software Security Attributes

    Science.gov (United States)

    2006-12-01

    Technology Foundations for Computational Evaluation of Software Security Attributes Gwendolyn H. Walton Thomas A. Longstaff Richard C...security attributes to the functional behavior of the software . The emergence of CERT’s new function extraction (FX) technology , unavailable to previous... software meets security requirements if they have been specified in behavioral terms. FX technology prescribes effective means to create and record

  9. Career and Technology Center Guides Students in Real-Life Careers | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer Frederick County Public School students have a unique opportunity—a chance to get a real-world, hands-on experience in biomedical science and biotechnology before they even graduate from high school, thanks to the Frederick County Career and Technology Center (CTC). Several years ago, the CTC established its biomedical sciences program with a curriculum from Project Lead the Way (PLTW), a nonprofit, nationwide developer of science, technology, engineering, and mathematics (STEM) education in elementary, middle, and high schools.

  10. An Ethical Framework for Evaluating Experimental Technology.

    Science.gov (United States)

    van de Poel, Ibo

    2016-06-01

    How are we to appraise new technological developments that may bring revolutionary social changes? Currently this is often done by trying to predict or anticipate social consequences and to use these as a basis for moral and regulatory appraisal. Such an approach can, however, not deal with the uncertainties and unknowns that are inherent in social changes induced by technological development. An alternative approach is proposed that conceives of the introduction of new technologies into society as a social experiment. An ethical framework for the acceptability of such experiments is developed based on the bioethical principles for experiments with human subjects: non-maleficence, beneficence, respect for autonomy, and justice. This provides a handle for the moral and regulatory assessment of new technologies and their impact on society.

  11. BioServe space technologies: A NASA Center for the Commercial Development of Space

    Science.gov (United States)

    1992-01-01

    BioServe Space Technologies, a NASA Center for the Commercial Development of Space (CCDS), was established in 1987. As is characteristic of each CCDS designated by NASA, the goals of this commercial center are aimed at stimulating high technology research that takes advantage of the space environment and at leading in the development of new products and services which have commercial potential or that contribute to possible new commercial ventures. BioServe's efforts in these areas focus upon space life science studies and the development of enabling devices that will facilitate ground-based experiments as well as the conversion of such to the microgravity environment. A direct result of BioServe's hardware development and life sciences studies is the training of the next generation of bioengineers who will be knowledgeable and comfortable working with the challenges of the space frontier.

  12. Calcine Waste Storage at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    Staiger, Merle Daniel; M. C. Swenson

    2005-01-01

    This report documents an inventory of calcined waste produced at the Idaho Nuclear Technology and Engineering Center during the period from December 1963 to May 2000. The report was prepared based on calciner runs, operation of the calcined solids storage facilities, and miscellaneous operational information that establishes the range of chemical compositions of calcined waste stored at Idaho Nuclear Technology and Engineering Center. The report will be used to support obtaining permits for the calcined solids storage facilities, possible treatment of the calcined waste at the Idaho National Engineering and Environmental Laboratory, and to ship the waste to an off-site facility including a geologic repository. The information in this report was compiled from calciner operating data, waste solution analyses and volumes calcined, calciner operating schedules, calcine temperature monitoring records, and facility design of the calcined solids storage facilities. A compact disk copy of this report is provided to facilitate future data manipulations and analysis.

  13. Thermal Technology Development Activities at the Goddard Space Flight Center - 2001

    Science.gov (United States)

    Butler, Dan

    2002-01-01

    This presentation provides an overview of thermal technology development activities carried out at NASA's Goddard Space Flight Center during 2001. Specific topics covered include: two-phase systems (heat pipes, capillary pumped loops, vapor compression systems and phase change materials), variable emittance systems, advanced coatings, high conductivity materials and electrohydrodynamic (EHD) thermal coatings. The application of these activities to specific space missions is also discussed.

  14. Final Technical Report - Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Sussman, Alan [University of Maryland

    2014-10-21

    This is a final technical report for the University of Maryland work in the SciDAC Center for Technology for Advanced Scientific Component Software (TASCS). The Maryland work focused on software tools for coupling parallel software components built using the Common Component Architecture (CCA) APIs. Those tools are based on the Maryland InterComm software framework that has been used in multiple computational science applications to build large-scale simulations of complex physical systems that employ multiple separately developed codes.

  15. Weapons of Mass Destruction Technology Evaluation and Training Range

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Larry Young

    2009-05-01

    The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

  16. SDN Data Center Performance Evaluation of Torus and Hypercube Interconnecting Schemes

    DEFF Research Database (Denmark)

    Andrus, Bogdan-Mihai; Vegas Olmos, Juan José; Mehmeri, Victor;

    2015-01-01

    — By measuring throughput, delay, loss-rate and jitter, we present how SDN framework yields a 45% performance increase in highly interconnected topologies like torus and hypercube compared to current Layer2 switching technologies, applied to data center architectures......— By measuring throughput, delay, loss-rate and jitter, we present how SDN framework yields a 45% performance increase in highly interconnected topologies like torus and hypercube compared to current Layer2 switching technologies, applied to data center architectures...

  17. Audio networking at the Center for Art and Media Technology Karlsruhe

    Science.gov (United States)

    Dutilleux, Pierre

    1993-01-01

    The Center for Art and Media Technology is dedicated to art and its relationship to new media. The Center supports music as well as graphic art. It also will house museums. The Center will be fully operational by the middle of 1996. The audio network will interconnect five recording studios and a large theater with three control rooms. With the additional facilities, the number of 40 interconnected rooms is reached. As to the quality and the versatility, the network can be compared, to some extent, to that of a broadcast-building. Traditional networking techniques involve many kilometers of high quality audio-cables and bulky automated patch-bays. Still, we wish even more freedom in the way the rooms are interconnected. Digital audio and computer network technology are promising. Although digital audio technology is spreading, the size of the totally digital systems is still limited. Fiber optic and large capacity optical disks offer attractive alternatives to traditional techniques (cabling, multitrack recorders, sound archives, routing). The digital audio standards are evolving from point to point communication to network communication. A 1 Gbit/s network could be the backbone of a solution.

  18. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility

    Energy Technology Data Exchange (ETDEWEB)

    Ansley, Shannon L.

    2002-02-20

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.

  19. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Waste Disposal Facility

    Energy Technology Data Exchange (ETDEWEB)

    Ansley, Shannon Leigh

    2002-02-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.

  20. A Technology for Program Documentation and Evaluation: A Pilot Meta-Evaluation.

    Science.gov (United States)

    Gray, Peter J.

    Meta evaluation, or the evaluation of evaluations, was applied to a technology for program documentation and evaluation used in a mainstreaming project. The technology consisted of four phases: (1) planning for decision-making; (2) documenting actual program outcomes; (3) implementing decisions; and (4) instituting program renewal. This pilot meta…

  1. The Assimilation of Assistive Technology in Residential Care Centers for People with Intellectual Disabilities

    Directory of Open Access Journals (Sweden)

    Eli Carmeli

    2004-01-01

    Full Text Available People with intellectual disability (ID require special support in order to achieve independence in their daily life. Persons with ID are less exposed to assistive technology, although studies have shown that the availability of aids afford an opportunity to reach independence and cooperation. The aim of this study was to examine the nature of the relationship between involvement of the physiotherapy (PT team and the degree to which assistive technology was used. A questionnaire was sent to all PTs employed at all 54 residential care centers for persons with ID of the Division for Mental Retardation at the Ministry of Social Affairs in Israel. A significantly positive correlation was found between the degree of involvement of the PT and the utilization of assistive technology. The study results may be summarized by stating that PTs demonstrated a great deal of involvement, particularly in relation to the extent of their work in the residential care centers. PT's awareness of the importance was indicated as the major reason to use assistive technology.

  2. Secondary relative evaluations on regional technology innovation capability in SMEs

    Institute of Scientific and Technical Information of China (English)

    BI Ke-xin; SUN Jin-hua; FENG Ying-jun

    2005-01-01

    According to this problem that every regional technology innovation of SMEs and innovation environment are different, the method on secondary relative evaluation to measure the innovation capability of SMEs in 9 provinces and 3 municipalities is developed in this paper. First the Fuzzy Integral Comprehensive Evaluation is adopted to measure the comprehensive index states of technological innovation of SMEs in different regions,and then the BCC model in Data Envelopment Analysis is used to calculate the secondary relative evaluation of regional technology innovation capability in SMEs, so that this method not only settles the relevance between indexes influencing regional technology innovation capability of SMEs, but also eliminates the influence of objective basic condition, and then provides bases for every region to make out policies and rules on technological innovation of SMEs and for enterprise to establish relevant strategy of technological innovation.

  3. Assessment and evaluation of technologies for environmental restoration. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Uzochukwu, G.A.

    1999-01-15

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  4. Assessment and evaluation of technologies for environmental restoration. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Uzochukwu, G. A. [North Carolina A and T State Univ., Greensboro, NC (United States)

    2000-06-30

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  5. Activities of the NASA/Marshall Space Flight Center pump stage technology team

    Science.gov (United States)

    Garcia, R.; Mcconnaughey, P.; Eastland, A.

    1992-01-01

    In order to advance rocket propulsion technology, the Consortium for Computational Fluid Dynamics (CFD) Application in Propulsion Technology has been formed at Marshall Space Flight Center (MSFC). The Consortium consists of three Teams: the turbine stage team, the pump stage team (PST), and the combustion devices team. The PST has formulated and is implementing a plan for pump technology development whose end product will be validated CFD codes suitable for application to pump components, test data suitable for validating CFD codes, and advanced pump components optimized using CFD codes. The PST's work during the fall of 1991 and the winter and spring of 1992 is discussed in this paper. This work is highlighted by CFD analyses of an advanced impeller design and collection of laser two-focus velocimeter data for the Space Shuttle Main Engine High Pressure Fuel Pump impeller.

  6. User-Centered Evaluation of Adaptive and Adaptable Systems

    NARCIS (Netherlands)

    Velsen, van Lex; Geest, van der Thea M.; Klaassen, Rob F.

    2009-01-01

    Adaptive and adaptable systems provide tailored output to various users in various contexts. While adaptive systems base their output on implicit inferences, adaptable systems use explicitly provided information. Since the presentation or output of these systems is adapted, standard user-centered ev

  7. Performance evaluation of a center pivot variable rate irrigation system

    Science.gov (United States)

    Variable Rate Irrigation (VRI) for center pivots offers potential to match specific application rates to non-uniform soil conditions along the length of the lateral. The benefit of such systems is influenced by the areal extent of these variations and the smallest scale to which the irrigation syste...

  8. The Albuquerque City Center Schools. Program Evaluation, 1984-85.

    Science.gov (United States)

    Johns, Jennifer S.; Panofsky, Carolyn

    The Albuquerque City Center Schools (ACCS) project, begun in 1983, was designed to increase the effectiveness of 12 schools in the Albuquerque High School cluster by creating a climate of high expectations, improving academic achievement, encouraging a climate of positive discipline, promoting student, community and private sector participation,…

  9. Innovative Rehabilitation Technology Demonstration and Evaluation Program

    Science.gov (United States)

    The needs associated with the aging water infrastructure are immense and have been estimated at more than $1 trillion dollars over the next 20 years for water and wastewater utilities. To meet this growing need, utilities require the use of innovative technologies and procedures...

  10. Biometric systems technology, design and performance evaluation

    CERN Document Server

    Wayman, James; Maltoni, Davide

    2005-01-01

    A reference book for anyone involved in the design, management or implementation of biometric systems, and provides all the information needed to a build reliable system. It focuses on the four most widely used types of biometric technology - speech, fingerprint, iris and face recognition.

  11. An Ethical Framework for Evaluating Experimental Technology

    NARCIS (Netherlands)

    Van de Poel, I.R.

    2015-01-01

    How are we to appraise new technological developments that may bring revolutionary social changes? Currently this is often done by trying to predict or anticipate social consequences and to use these as a basis for moral and regulatory appraisal. Such an approach can, however, not deal with the unce

  12. Novel energy saving technologies evaluation tool

    NARCIS (Netherlands)

    Klemeš, J.; Bulatov, I.; Koppejan, J.

    2009-01-01

    The lead-time for the development of a new energy technology, from the initial idea to the commercial application, can take many years. The reduction of this time has been the main objective of the EC DGTREN, who have funded two related recent projects, EMINENT and EMINENT2 (Early Market Introductio

  13. Novel energy saving technologies evaluation tool

    NARCIS (Netherlands)

    Klemeš, J.; Bulatov, I.; Koppejan, J.

    2009-01-01

    The lead-time for the development of a new energy technology, from the initial idea to the commercial application, can take many years. The reduction of this time has been the main objective of the EC DGTREN, who have funded two related recent projects, EMINENT and EMINENT2 (Early Market Introductio

  14. Evaluation of Courses and Programs Offered Under the Auspices of Wayne State University and the University of Michigan at the University Center for Adult Education, Detroit, Michigan.

    Science.gov (United States)

    Dada, Paul O. A.

    By use of interviews, questionnaires, and observation, the courses and programs offered by the University Center for Adult Education, in Detroit, were evaluated. The courses concerned Communication and Language Art, Environment, Practical Economics, Behavioral Science, Technology, Extension Courses, and Special Events. Evaluation findings show…

  15. The World Wide Web and Technology Transfer at NASA Langley Research Center

    Science.gov (United States)

    Nelson, Michael L.; Bianco, David J.

    1994-01-01

    NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of the WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. During its first year on the Web, LaRC also developed several WWW-based information repositories. The Langley Technical Report Server (LTRS), a technical paper delivery system with integrated searching and retrieval, has proved to be quite popular. The NASA Technical Report Server (NTRS), an outgrowth of LTRS, provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software with the possible phase-out of NASA's COSMIC program. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people. With the completion of the LaRC reorganization, the Technology Applications Group, charged with interfacing with non-aerospace companies, opened for business with a popular home page.

  16. User-Centered Evaluation of the Quality of Blogs

    Science.gov (United States)

    Chuenchom, Sutthinan

    2011-01-01

    Blogs serve multiple purposes, resulting in several types of blogs that vary greatly in terms of quality and content. It is important to evaluate the quality of blogs, which requires appropriate evaluation criteria. Unfortunately, there are minimal studies on framework and the specific criteria and indicators for evaluating the quality of blogs.…

  17. Development of evaluation and performance verification technology for radiotherapy radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. Y.; Jang, S. Y.; Kim, B. H. and others

    2005-02-15

    No matter how much the importance is emphasized, the exact assessment of the absorbed doses administered to the patients to treat the various diseases such as lately soaring malignant tumors with the radiotherapy practices is the most important factor. In reality, several over-exposed patients from the radiotherapy practice become very serious social issues. Especially, the development of a technology to exactly assess the high doses and high energies (In general, dose administered to the patients with the radiotherapy practices are very huge doses, and they are about three times higher than the lethal doses) generated by the radiation generators and irradiation equipment is a competing issue to be promptly conducted. Over fifty medical centers in Korea operate the radiation generators and irradiation equipment for the radiotherapy practices. However, neither the legal and regulatory systems to implement a quality assurance program are sufficiently stipulated nor qualified personnel who could run a program to maintain the quality assurance and control of those generators and equipment for the radiotherapy practices in the medical facilities are sufficiently employed. To overcome the above deficiencies, a quality assurance program such as those developed in the technically advanced countries should be developed to exactly assess the doses administered to patients with the radiotherapy practices and develop the necessary procedures to maintain the continuing performance of the machine or equipment for the radiotherapy. The QA program and procedures should induce the fluent calibration of the machine or equipment with quality, and definitely establish the safety of patients in the radiotherapy practices. In this study, a methodology for the verification and evaluation of the radiotherapy doses is developed, and several accurate measurements, evaluations of the doses delivered to patients and verification of the performance of the therapy machine and equipment are

  18. 76 FR 60505 - Center for Drug Evaluation and Research, Approach to Addressing Drug Shortage; Public Workshop...

    Science.gov (United States)

    2011-09-29

    ... HUMAN SERVICES Food and Drug Administration Center for Drug Evaluation and Research, Approach to... notice, FDA announced a public workshop regarding the approach of the Center for Drug Evaluation and Research to addressing drug shortages. FDA is opening a comment period in light of public interest in...

  19. 78 FR 16679 - Center for Drug Evaluation and Research Medical Policy Council; Request for Comments

    Science.gov (United States)

    2013-03-18

    ... HUMAN SERVICES Food and Drug Administration Center for Drug Evaluation and Research Medical Policy... interested organizations, on medical policy issues that may be considered by the CDER Medical Policy Council (Council) in FDA's Center for Drug Evaluation and Research (CDER). These comments will help the...

  20. 76 FR 59407 - Center for Biologics Evaluation and Research Report of Scientific and Medical Literature and...

    Science.gov (United States)

    2011-09-26

    ... ``Center for Biologics Evaluation and Research Report of Scientific and Medical Literature and Information... HUMAN SERVICES Food and Drug Administration Center for Biologics Evaluation and Research Report of Scientific and Medical Literature and Information on Non-Standardized Allergenic Extracts in the Diagnosis...

  1. 75 FR 76995 - National Toxicology Program (NTP); Center for the Evaluation of Risks to Human Reproduction...

    Science.gov (United States)

    2010-12-10

    ... established the NTP Center for the Evaluation of Risks to Human Reproduction (CERHR) in 1998 (63 FR 68782) to... HUMAN SERVICES National Toxicology Program (NTP); Center for the Evaluation of Risks to Human Reproduction (CERHR); NTP Workshop: Role of Environmental Chemicals in the Development of Diabetes and...

  2. 42 CFR 415.174 - Exception: Evaluation and management services furnished in certain centers.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Exception: Evaluation and management services furnished in certain centers. 415.174 Section 415.174 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... in Teaching Settings § 415.174 Exception: Evaluation and management services furnished in certain...

  3. The Brave New World of GEC Evaluation: The Experience of the Rhode Island Geriatric Education Center

    Science.gov (United States)

    Filinson, Rachel; Clark, Phillip G.; Evans, Joann; Padula, Cynthia; Willey, Cynthia

    2012-01-01

    In 2007, the Health Resources Services Administration introduced new mandates that raised the standards on program evaluation for Geriatric Education Centers. Described in this article are the primary and secondary evaluation efforts undertaken for one program within the Rhode Island Geriatric Education Center (RIGEC), the findings from these…

  4. Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

    Science.gov (United States)

    Quick, Jason

    2009-01-01

    The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the

  5. A survey of program evaluation practices in family-centered pediatric rehabilitation settings.

    Science.gov (United States)

    Moreau, Katherine A; Cousins, J Bradley

    2014-04-01

    Program evaluation is becoming increasingly important in pediatric rehabilitation settings that adhere to the family-centered service (FCS) philosophy. However, researchers know little about the specific evaluation activities occurring in these settings or the extent to which evaluators/service providers uphold FCS in their program evaluation activities. Through a questionnaire survey, this study aimed to document evaluators/service providers' perceptions of the level of program evaluation occurring in their Canadian pediatric rehabilitation centers. It also investigated the extent to which evaluators/service providers perceive program evaluation practices at their centers to be consistent with the FCS context of Canadian pediatric rehabilitation settings. The findings suggested that the amount of evaluation activities occurring within the respondents' centers is variable; that the majority of individuals working in program evaluation do not have formal training in it; and that the respondents' centers have limited resources for evaluation. The study also showed that staff members believe their centers' evaluation activities are somewhat consistent with FCS philosophy, but that improvements are needed.

  6. Evaluation of completeness of selected poison control center data fields.

    Science.gov (United States)

    Jaramillo, Jeanie E; Marchbanks, Brenda; Willis, Branch; Forrester, Mathias B

    2010-08-01

    Poison control center data are used in research and surveillance. Due to the large volume of information, these efforts are dependent on data being recorded in machine readable format. However, poison center records include non-machine readable text fields and machine readable coded fields, some of which are duplicative. Duplicating this data increases the chance of inaccurate/incomplete coding. For surveillance efforts to be effective, coding should be complete and accurate. Investigators identified a convenience sample of 964 records and reviewed the substance code determining if it matched its text field. They also reviewed the coded clinical effects and treatments determining if they matched the notes text field. The substance code matched its text field for 91.4% of the substances. The clinical effects and treatments codes matched their text field for 72.6% and 82.4% of occurrences respectively. This under-reporting of clinical effects and treatments has surveillance and public health implications.

  7. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...

  8. Evaluation and directions of the photovoltaic technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kazmerski, L.L.; Emery, K.A.; DeBlasio, R. (National Renewable Energy Lab., Golden, CO (United States))

    1994-08-01

    The status of, directions and expectations for photovoltaic technologies are discussed and updated, with emphasis on the performances of cells and modules used in various research and commercial solar cell approaches. Current and projected research and development directions are indicated. Special aspects of the current evolution of photovoltaics from the research laboratory to the commercial arena are discussed, including new programs directed to make this energy resource a viable electricity choice for users worldwide. (Author)

  9. Patients' satisfaction evaluation with the health center of elis province.

    Science.gov (United States)

    Karavida, Angeliki; Stamouli, Maria-Aggeliki; Balis, Charalampos

    2014-01-01

    Patient satisfaction related to the provided health services is a key indicator of the quality of the health sector. The SERVQUAL model was employed as a way of measuring the level of patient satisfaction with the services of the Health Center of Elis Province. Although certain aspects such as "Assurance" and "Empathy" meet the users' needs, improvements like a detailed medical record and an overhaul of the equipment need to be introduced.

  10. Performance evaluation of two highly interconnected Data Center networks

    DEFF Research Database (Denmark)

    Andrus, Bogdan-Mihai; Mihai Poncea, Ovidiu; Vegas Olmos, Juan José;

    2015-01-01

    In this paper we present the analysis of highly interconnected topologies like hypercube and torus and how they can be implemented in data centers in order to cope with the rapid increase and demands for performance of the internal traffic. By replicating the topologies and subjecting them...... of the network was increased by a factor of 32. The performance measurements are supported by abstract metrics that also give a cost and complexity indication in choosing the right topology for the required application....

  11. The Study on Educational Technology Abilities Evaluation Method

    Science.gov (United States)

    Jing, Duan

    The traditional methods used to evaluate the test, the test did not really measure that we want to measuring things. Test results and can not serve as a basis for evaluation, so it was worth the natural result of its evaluation of weighing. This system is full use of technical means of education, based on education, psychological theory, to evaluate the object-based, evaluation tools, evaluation of secondary teachers to primary and secondary school teachers in educational technology as the goal, using a variety of evaluation of side France, from various angles established an informal evaluation system.

  12. Approaches for Evaluating the Usability of Assistive Technology Product Prototypes

    Science.gov (United States)

    Choi, Young Mi; Sprigle, Stephen H.

    2011-01-01

    User input is an important component to help guide designers in producing a more usable product. Evaluation of prototypes is one method of obtaining this input, but methods for evaluating assistive technology prototypes during design have not been adequately described or evaluated. This project aimed to compare different methods of evaluating…

  13. Students’ Perception on Teaching Practicum Evaluation using Video Technology

    Science.gov (United States)

    Chee Sern, Lai; ‘Ain Helan Nor, Nurul; Foong, Lee Ming; Hassan, Razali

    2017-08-01

    Video technology has been widely used in education especially in teaching and learning. However, the use of video technology for evaluation purpose especially in teaching practicum is extremely scarce and the benefits of video technology in teaching practicum evaluation have not yet been fully discovered. For that reason, this quantitative research aimed at identifying the perceptions of trainee teachers towards teaching practicum evaluation via video technology. A total of 260 students of Teacher Certification Programme (Program Pensiswazahan Guru - PPG) from the Faculty of Technical and Vocational Education (FPTV) of Universiti Tun Hussein Onn Malaysia (UTHM) had been randomly selected as respondents. A set of questionnaire was developed to assess the suitability, effectiveness and satisfaction of using video technology for teaching practicum. Conclusively, this research showed that the trainee teachers have positive perceptions in all three aspects related teaching practicum evaluation using video technology. Apart from that, no significant racial difference was found in the measured aspects. In addition, the trainee teachers also showed an understanding of the vast importance of teaching practicum evaluation via video. These research findings suggest that video technology can be a feasible and practical means of teaching practicum evaluation especially for distance learning program.

  14. Using the NIATx Model to Implement User-Centered Design of Technology for Older Adults.

    Science.gov (United States)

    Gustafson, David H; Maus, Adam; Judkins, Julianne; Dinauer, Susan; Isham, Andrew; Johnson, Roberta; Landucci, Gina; Atwood, Amy K

    2016-01-14

    What models can effectively guide the creation of eHealth and mHealth technologies? This paper describes the use of the NIATx model as a framework for the user-centered design of a new technology for older adults. The NIATx model is a simple framework of process improvement based on the following principles derived from an analysis of decades of research from various industries about why some projects fail and others succeed: (1) Understand and involve the customer; (2) fix key problems; (3) pick an influential change leader; (4) get ideas from outside the field; (5) use rapid-cycle testing. This paper describes the use of these principles in technology development, the strengths and challenges of using this approach in this context, and lessons learned from the process. Overall, the NIATx model enabled us to produce a user-focused technology that the anecdotal evidence available so far suggests is engaging and useful to older adults. The first and fourth principles were especially important in developing the technology; the fourth proved the most challenging to use.

  15. Informal Evaluation and Institutionalization of Neoteric Technology Ideas

    DEFF Research Database (Denmark)

    Ulrich, Frank; Mengiste, Shegaw Anagaw; Mûller, Sune Dueholm

    2015-01-01

    This article explores the complex process of how ideas evolve in organizations that are engaged in developing and using information technology (IT) based systems. We put forward a framework emphasizing the interconnection between creativity and institutionalization. We argue that ideas are embedded...... institutionalized technologies during their informal evaluation and sensemaking of these ideas. Moreover, we suggest that conflicts between competing frames of reference during this evaluation may result in the rejection, adoption, or multiplication of new technology ideas. Drawing on Information Systems (IS) based...... theories of creativity, Scandinavian institutionalism, and empirical data from two Danish organizations, this article investigates the interplay between creativity, technology, and human sensemaking in the process of translating and transforming technology ideas into full-fledged technological innovations....

  16. New microencapsulated sunscreens: technology and comparative evaluation.

    Science.gov (United States)

    Anselmi, C; Centini, M; Rossi, C; Ricci, M; Rastrelli, A; Andreassi, M; Buonocore, A; La Rosa, C

    2002-08-21

    The aim of this work is to obtain new technologically improved microencapsulated sunscreens characterised by UV-radiation stability, good substantivity, low toxicity, a better tolerability and easiness to formulation. For this purpose we prepared two different systems using semisynthetic Hyaluronic Acid (HA) benzyl ester and a synthetic polymer (patent pending). We obtained these systems using two different methodologies: emulsification/solvent evaporation and emulsification/solvent extraction. The comparison between the two formulated systems was carried out in terms of their chemical-physical and biological properties.

  17. The Upside of an Annual Survey in Light of Involvement and Use: Evaluating the Advanced Technological Education Program

    Science.gov (United States)

    Toal, Stacie A.; Gullickson, Arlen R.

    2011-01-01

    In 1999, the National Science Foundation (NSF) awarded funds to the Evaluation Center at Western Michigan University to conduct an external evaluation of the Advanced Technological Education (ATE) program. ATE, a federally mandated program designed to increase the number and quality of skilled technicians in the U.S. workforce, has funded over 346…

  18. The centering and leveling adjustment and control technology for the ultra-precision turntable

    Science.gov (United States)

    Tian, Yanrong; Wang, Yun; Wang, Longxiao; Zhao, Weirui

    2015-08-01

    In order to realize the centering and leveling adjustment in large aperture spherical and aspheric surface shape measurement, by combining with the aerostatic bearing rotary shaft, working platform, high performance servo motor, photoelectric encoder, the micro displacement actuator of XYZ axis, sensor and Renishaw circular grating ,a set of fast and ultra-precision centering and leveling adjustment system is developed .The system is based on large range of air lubrication technology for high precision aerostatic bearing turntable, using the principle of three point supporting method, and the driving of tens nanometer resolution are provided by a piezoelectric micro displacement actuator. To realize the automatical centering and leveling adjustment in the large aperture spherical and aspheric surface shape measurement system, a software control program is designed with VC++. Through experimental test: centering adjusting operation can eventually converges to 0.5μm, leveling adjusting operation can eventually converges to 0.2 ", the time of adjusting can be less than 120 s. The experimental results shows that, compared with the previous system, the structure of the developed measurement and control system is more simple, more flexible, it can meet the demands of high precision, high resolution, large adjusting range, no friction, easy to drive, and high bearing stiffness etc in eccentric adjusting operation of optical precision measurement well.

  19. The Terascale Simulation Tools and Technologies Center Annual Report August 15, 2001-September 30, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Glimm, J; Brown, D L; Freitag, L

    2002-09-30

    The overall goal of the TSTT Center is to enable the scientific community to more easily use modern high-order, adaptive, parallel mesh and discretization tools. To achieve this goal, we are following three distinct but related paths. The first is to work directly with a number of lead application teams (for the most part SciDAC-funded) to use such technologies in their application domains. The second is to create new technology that eases the use of such tools, not only for our designated application partners, but across a broad range of application areas that require mesh and discretization tools for scientific simulation. The main technology thrust is not to create new tools (although some of this will occur), but to create new capabilities that will allow the use of these tools interoperably. This very profound step can be compared to the shift from hand craftmanship to manufactured products with interchangable components which revolutionized the world economy one to two centuries ago. The third component of our efforts is to embed this work in a larger framework of related activities, each seeking a similar, and profound, change in the practice of computational science. To ensure the relevance of our work to the SciDAC program goals, we originally selected six application areas, and in each, one or more application projects and teams with which to work directly. One application collaboration which targeted the development of an adaptive mesh refinement capability for the oceanographic code POP was postponed and may be dropped due to unanticipated technical obstacles in the specific goal selected. One new application involving jet breakup for spray combustion was added. The initial job of establishing good working relations, agreement on a plan of action, and obtaining initial results was accomplished in all cases. In general, our work with the applications has been more difficult than anticipated, in spite of the experience of the TSTT team members in similar

  20. The Terascale Simulation Tools and Technologies Center Annual Report August 15, 2001-September 30, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Glimm, J; Brown, D L; Freitag, L

    2002-09-30

    The overall goal of the TSTT Center is to enable the scientific community to more easily use modern high-order, adaptive, parallel mesh and discretization tools. To achieve this goal, we are following three distinct but related paths. The first is to work directly with a number of lead application teams (for the most part SciDAC-funded) to use such technologies in their application domains. The second is to create new technology that eases the use of such tools, not only for our designated application partners, but across a broad range of application areas that require mesh and discretization tools for scientific simulation. The main technology thrust is not to create new tools (although some of this will occur), but to create new capabilities that will allow the use of these tools interoperably. This very profound step can be compared to the shift from hand craftmanship to manufactured products with interchangable components which revolutionized the world economy one to two centuries ago. The third component of our efforts is to embed this work in a larger framework of related activities, each seeking a similar, and profound, change in the practice of computational science. To ensure the relevance of our work to the SciDAC program goals, we originally selected six application areas, and in each, one or more application projects and teams with which to work directly. One application collaboration which targeted the development of an adaptive mesh refinement capability for the oceanographic code POP was postponed and may be dropped due to unanticipated technical obstacles in the specific goal selected. One new application involving jet breakup for spray combustion was added. The initial job of establishing good working relations, agreement on a plan of action, and obtaining initial results was accomplished in all cases. In general, our work with the applications has been more difficult than anticipated, in spite of the experience of the TSTT team members in similar

  1. Data center network performance evaluation in ns3

    DEFF Research Database (Denmark)

    Andrus, Bogdan-Mihai; Vegas Olmos, Juan José

    2015-01-01

    In the following paper we present the analysis of highly interconnected topologies like hypercube and torus and how they can be implemented in data centers in order to cope with the rapid increase and demands for performance of the internal traffic. By replicating the topologies in NS3 and subjec...... we scale the network from 16 to 512 switches. The performance measurements are supported by abstract metrics that that also give a cost and complexity indication in choosing the right topology for the required application....

  2. Economic Development Activities at the Young - Rainey Science, Technology, & Research (STAR) Center

    Energy Technology Data Exchange (ETDEWEB)

    Paul S. Sacco; Carl Smeigh; John Caponiti, Jr.

    2008-06-30

    Project mission was to mitigate the adverse economic effects of closing the U.S. Department of Energy's Pinellas Plant in Largo, Florida. This project was to facilitate the physical renovation of the plant and to help maintain and create jobs for the employees that worked at the plant when DOE terminated its operations. It also included finding and attracting high technology, industrial manufacturing and related firms to utilize the space and high tech equipment to remain at the plant. Stakeholders included the affected plant employees, local government and related public organizations, and businesses and universities in the Tampa Bay Florida area. The $17.6 million funded for this project helped produce 2,780 jobs at the Young - Rainey STAR Center at an average cost of $6,328. Rental income from STAR Center tenants and third party cash input amounted to approximately $66 million over the project period of 13.3 years.

  3. Evaluating Computer Technology Integration in a Centralized School System

    Science.gov (United States)

    Eteokleous, N.

    2008-01-01

    The study evaluated the current situation in Cyprus elementary classrooms regarding computer technology integration in an attempt to identify ways of expanding teachers' and students' experiences with computer technology. It examined how Cypriot elementary teachers use computers, and the factors that influence computer integration in their…

  4. Assistive Technology for Persons with Physical Disabilities: Evaluation and Outcomes

    NARCIS (Netherlands)

    Rigby, P.J.

    2009-01-01

    This thesis presents a compilation of published studies that evaluated assistive technology interventions for children and adults with physical disabilities. The first chapter introduces the need for and the challenges involved in studying the outcomes of assistive technology interventions. The pers

  5. Prototype-Technology Evaluator and Research Aircraft Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Area-I team has developed and flight tested the unmanned Prototype-Technology Evaluation and Research Aircraft or PTERA ("ptera" being Greek for wing, or...

  6. TECHNOLOGY EVALUATION REPORT: RETECH'S PLASMA CENTRIFUGAL FURNACE - VOLUME I

    Science.gov (United States)

    A demonstration of the Retech, Inc. Plasma Centrifugal Furnace (PCF) was conducted under the Superfund Innovative Technology Evaluation (SITE) Program at the Department of Energy's (DOE's) Component Development and Integration Facility in Butte, Montana. The furnace uses heat gen...

  7. EVALUATION OF CURRENT SUSTAINABILITY ASSESSMENT OF BIOBASED TECHNOLOGY

    Science.gov (United States)

    Sustainable technology is driven by economic competitiveness, government policies and public pressure. The claim of inherent cleanliness for biotechnology is too simplistic. Each application of biotechnology must be evaluated for suitable characteristics of sustainability. The ...

  8. Cancer Inhibitors Isolated from an African Plant | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's Molecular Targets Development Program is seeking parties interested in collaborative research to further develop, evaluate, or commercialize cancer inhibitors isolated from the African plant Phyllanthus englerii. The technology is also available for exclusive or non-exclusive licensing.

  9. Organizational Analysis of the United States Army Evaluation Center

    Science.gov (United States)

    2014-12-01

    Separation Incentive Program (VSIP) as it appears as if all individuals on the same PD have the same exact skill mix .. The commodities that AEC evaluates...There is a varying mix of civilian and military personnel in all types of positions at AEC. Both types of personnel bring different but important...Report  OMAR  20  Safety Confirmation  SC  132  Safety Confirmation Recommendation  SCR   21  System Evaluation Plan  SEP  4  System Evaluation Plan

  10. National Center of Excellence for Energy Storage Technology 168.10

    Energy Technology Data Exchange (ETDEWEB)

    Guezennec, Yann

    2011-12-31

    This report documents the performance of the Ohio State University (OSU) and Edison Welding Institute (EWI) in the period from 10/1/2010 to 12/31/2012. The objective of the project is to establish a Center of Excellence that leverages the strengths of the partners to establish a unique capability to develop and transfer energy storage industries to establish a unique capability in the development and transfer of energy storage system technology through a fundamental understanding of battery electrical and thermal performance, damage and aging mechanisms, and through the development of reliable, high-speed processes for joining substrates in battery cell, module and pack assemblies with low manufacturing variability. During this period, the OSU activity focused on procuring the equipment, materials and supplies necessary to conduct the experiments planned in the statement of project objectives. In detail, multiple laboratory setups were developed to enable for characterizing the open-circuit potential of cathode and anode materials for Li-ion batteries, perform experiments on calorimetry, and finally built multiple cell and module battery cyclers to be able to perform aging campaign on a wide variety of automotive grade battery cells and small modules. This suite of equipment feeds directly into the development, calibration of battery models ranging from first principle electrochemical models to electro-thermal equivalent circuit models suitable for use in control and xEV vehicle simulations. In addition, it allows to develop and calibrate ‘aging’ models for Li-ion batteries that enable the development of diagnostics and prognostics tools to characterize and predict battery degradation from automotive usage under a wide array of environmental and usage scenarios. The objective of the EWI work scope is to develop improved processes for making metal-tometal joints in advanced battery cells and packs. It will focus on developing generic techniques for making

  11. Evaluation of New European Technologies for Future Avionics

    Science.gov (United States)

    Poupat, Jean-Luc; Chevalier, Laurent; Monchaux, David; Le Meur, Patrick

    2014-08-01

    With the support of CNES DLA as operator, and Airbus DS Space System as architect, Airbus DS Electronics in Elancourt has developed a modular platform to evaluate new technologies for future avionics.This paper presents the Avionic-X project that has initiated this development, the modular platform itself and the status on this activity performed on this evaluation platform which has allowed the use of European technologies such as ARM processing cores or TTEthernet communication bus.

  12. The Use of Assessment Center Technology for the Prevention and Reduction of Professional Burnout

    Directory of Open Access Journals (Sweden)

    Stalnova I.A.,

    2014-08-01

    Full Text Available Dynamism of professional activity, increasing workload and working time shortage, high social responsibility for results and other factors increase the probability of formation of burnout in government employees. This actualizes the search for new forms and methods of professional qualification of government employees based on an assessment of their psychological qualities. We discuss the problem of professional and personal burnout in Rosreestr employees, reveal the symptoms of this syndrome. As a tool for preventing and reducing the negative impact of professional deformation in Rosreestr workers, we propose the use of assessment center technology successfully tested in the international practice and requiring adaptation to Russian realities.

  13. Idaho Nuclear Technology and Engineering Center Newly Generated Liquid Waste Demonstration Project Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.

    2000-02-01

    A research, development, and demonstration project for the grouting of newly generated liquid waste (NGLW) at the Idaho Nuclear Technology and Engineering Center is considered feasible. NGLW is expected from process equipment waste, decontamination waste, analytical laboratory waste, fuel storage basin waste water, and high-level liquid waste evaporator condensate. The potential grouted waste would be classed as mixed low-level waste, stabilized and immobilized to meet RCRA LDR disposal in a grouting process in the CPP-604 facility, and then transported to the state.

  14. Electric Power Research Institute Environmental Control Technology Center Report to the Steering Committee

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1998-01-12

    Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC). Testing for the month involved the Dry Sorbent Injection (DSI) test block with the Carbon Injection System. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit, the 0.4 MW Mini-Pilot Wet Scrubber, and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. These units remain available for testing as future project work is identified.

  15. NASA Center for Climate Simulation (NCCS) Advanced Technology AT5 Virtualized Infiniband Report

    Science.gov (United States)

    Thompson, John H.; Bledsoe, Benjamin C.; Wagner, Mark; Shakshober, John; Fromkin, Russ

    2013-01-01

    The NCCS is part of the Computational and Information Sciences and Technology Office (CISTO) of Goddard Space Flight Center's (GSFC) Sciences and Exploration Directorate. The NCCS's mission is to enable scientists to increase their understanding of the Earth, the solar system, and the universe by supplying state-of-the-art high performance computing (HPC) solutions. To accomplish this mission, the NCCS (https://www.nccs.nasa.gov) provides high performance compute engines, mass storage, and network solutions to meet the specialized needs of the Earth and space science user communities

  16. Panel 1 - comparative evaluation of deposition technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, G.R.; Stodolsky, F. [Argonne National Lab., IL (United States); Benson, D.K.; Pitts, R.J. [National Renewable Energy Lab., Golden, CO (United States); Bhat, D.G. [GTE Valenite Corp., Troy, MI (United States); Yulin Chen [Allison Gas Turbine Division, GM, Indianapolis, IN (United States); Gat, R.; Sunkara, M.K. [Case Western Reserve Univ., Cleveland, OH (United States); Kelly, M. [Stanford Univ., CA (United States); Lawler, J.E. [Univ. of Wisconsin, Madison (United States); Nagle, D.C. [Martin Marietta Labs., Baltimore, MD (United States); Outka, D. [Sandia National Laboratories, Livermore, CA (United States); Revankar, G.S. [Deere & Co., Moline, IL (United States); Subramaniam, V.V. [Ohio State Univ., Columbus (United States); Wilbur, P.J. [Colorado State Univ., Fort Collins (United States); Mingshow Wong [Northwestern Univ., Evanston, IL (United States); Woolam, W.E. [Southwest Research Inst., Arlington, VA (United States)

    1993-01-01

    This working group attempted to evaluate/compare the different types of deposition techniques currently under investigation for depositing diamond and diamond-like carbon films. A table lists the broad types of techniques that were considered for depositing diamond and diamond-like carbon films. After some discussion, it was agreed that any evaluation of the various techniques would be dependent on the end application. Thus the next action was to list the different areas where diamond and DLC films could find applications in transportation. These application areas are listed in a table. The table intentionally does not go into great detail on applications because that subject is dealt with specifically by Panel No. 4 - Applications To Transportation. The next action concentrated on identifying critical issues or limitations that need to be considered in evaluating the different processes. An attempt was then made to rank different broad categories of deposition techniques currently available or under development based on the four application areas and the limitations. These rankings/evaluations are given for diamond and DLC techniques. Finally, the working group tried to identify critical development and research issues that need to be incorporated into developing a long-term program that focuses on diamond/DLC coatings for transportation needs. 5 tabs.

  17. Evaluation of patient-centered electronic health record to overcome digital divide.

    Science.gov (United States)

    Kim, E; Mayani, A; Modi, S; Kim, Y; Soh, C

    2005-01-01

    Advances and wide acceptance of information and communication technology (ICT) have made development and implementation of web-based electronic personal health records (PHRs) more feasible than ever before, and previous studies have demonstrated some of its potential and promises. However, this type of ICT-dependent approach inherits its own vulnerabilities of exposing the society to "digital divide", commonly described as the gap that exists among individuals and communities with regards to the 'haves' and 'have-nots' of information and modern communications technologies. To address these concerns and improve healthcare outcomes, we have developed and customized a web-based patient-centered electronic PHR, named the Personal Health Information Management System (PHIMS), and evaluated the system at the Everett Housing Authority, which provides housings for low-income families and elderly or disabled populations. A preliminary study demonstrates that 92% of the participating residents are satisfied with the PHIMS system in general. Some of the residents found PHIMS records very useful for their clinic visits.

  18. Defining a framework for health information technology evaluation.

    Science.gov (United States)

    Eisenstein, Eric L; Juzwishin, Don; Kushniruk, Andre W; Nahm, Meredith

    2011-01-01

    Governments and providers are investing in health information technologies with little evidence as to their ultimate value. We present a conceptual framework that can be used by hospitals, clinics, and health care systems to evaluate their health information technologies. The framework contains three dimensions that collectively define generic evaluation types. When these types are combined with contextual considerations, they define specific evaluation problems. The first dimension, domain, determines whether the evaluation will address the information intervention or its outcomes. The second dimension, mechanism, identifies the specific components of the new information technology and/or its health care system that will be the subject of the evaluation study. And, the third dimension, timing, determines whether the evaluation occurs before or after the health information technology is implemented. Answers to these questions define a set of evaluation types each with generic sets of evaluation questions, study designs, data collection requirements, and analytic methods. When these types are combined with details of the evaluation context, they define specific evaluation problems.

  19. Information systems performance evaluation, introducing a two-level technique: Case study call centers

    Directory of Open Access Journals (Sweden)

    Hesham A. Baraka

    2015-03-01

    The objective of this paper was to introduce a new technique that can support decision makers in the call centers industry to evaluate, and analyze the performance of call centers. The technique presented is derived from the research done on measuring the success or failure of information systems. Two models are mainly adopted namely: the Delone and Mclean model first introduced in 1992 and the Design Reality Gap model introduced by Heeks in 2002. Two indices are defined to calculate the performance of the call center; the success index and the Gap Index. An evaluation tool has been developed to allow call centers managers to evaluate the performance of their call centers in a systematic analytical approach; the tool was applied on 4 call centers from different areas, simple applications such as food ordering, marketing, and sales, technical support systems, to more real time services such as the example of emergency control systems. Results showed the importance of using information systems models to evaluate complex systems as call centers. The models used allow identifying the dimensions for the call centers that are facing challenges, together with an identification of the individual indicators in these dimensions that are causing the poor performance of the call center.

  20. The National Space Science and Technology Center's Education and Public Outreach Program

    Science.gov (United States)

    Cox, G. N.; Denson, R. L.

    2004-12-01

    The objective of the National Space Science and Technology Center's (NSSTC) Education and Public Outreach program (EPO) is to support K-20 education by coalescing academic, government, and business constituents awareness, implementing best business/education practices, and providing stewardship over funds and programs that promote a symbiotic relationship among these entities, specifically in the area of K-20 Science, Technology, Engineering, and Mathematics (STEM) education. NSSTC EPO Program's long-term objective is to showcase its effective community-based integrated stakeholder model in support of STEM education and to expand its influence across the Southeast region for scaling ultimately across the United States. The Education and Public Outreach program (EPO) is coordinated by a supporting arm of the NSSTC Administrative Council called the EPO Council (EPOC). The EPOC is funded through federal, state, and private grants, donations, and in-kind contributions. It is comprised of representatives of NSSTC Research Centers, both educators and scientists from the Alabama Space Science and Technology Alliance (SSTA) member institutions, the Alabama Space Grant Consortium and the NASA Marshall Space Flight Center's (MSFC) Education Office. Through its affiliation with MSFC and the SSTA - a consortium of Alabama's research universities that comprise the NSSTC, EPO fosters the education and development of the next generation of Alabama scientists and engineers by coordinating activities at the K-20 level in cooperation with the Alabama Department of Education, the Alabama Commission on Higher Education, and Alabama's businesses and industries. The EPO program's primary objective is to be Alabama's premiere organization in uniting academia, government, and private industry by way of providing its support to the State and Federal Departments of Education involved in systemic STEM education reform, workforce development, and innovative uses of technology. The NSSTC EPO

  1. Noise Evaluation in the Commercial Center of Santa Cruz / RN

    Directory of Open Access Journals (Sweden)

    Dimitri Taurino Guedes

    2010-06-01

    Full Text Available The modern cities are characterized, mostly, by excessive concentration of trade and services in central areas, a fact that contributes to many problems, including noise pollution, which resulting in inconvenience and health problems to the population. This study aimed to analyze the level noise in the center of the city of Santa Cruz / RN. Were analyzed 15 spots on the main streets of the city during morning and Verpertine for two weeks, with the analyzer the Multi-Role Model THDL - 400, with INTERVAL of 40 minutes between measurements. It was observed that most points had noise levels above 70 decibels during the period. Therefore, above 65dB, the proposed legislation, requiring increased supervisory processes and environmental education.

  2. Assessing controls on perched saturated zones beneath the Idaho Nuclear Technology and Engineering Center, Idaho

    Science.gov (United States)

    Mirus, Benjamin B.; Perkins, Kim S.; Nimmo, John R.

    2011-01-01

    Waste byproducts associated with operations at the Idaho Nuclear Technology and Engineering Center (INTEC) have the potential to contaminate the eastern Snake River Plain (ESRP) aquifer. Recharge to the ESRP aquifer is controlled largely by the alternating stratigraphy of fractured volcanic rocks and sedimentary interbeds within the overlying vadose zone and by the availability of water at the surface. Beneath the INTEC facilities, localized zones of saturation perched on the sedimentary interbeds are of particular concern because they may facilitate accelerated transport of contaminants. The sources and timing of natural and anthropogenic recharge to the perched zones are poorly understood. Simple approaches for quantitative characterization of this complex, variably saturated flow system are needed to assess potential scenarios for contaminant transport under alternative remediation strategies. During 2009-2011, the U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, employed data analysis and numerical simulations with a recently developed model of preferential flow to evaluate the sources and quantity of recharge to the perched zones. Piezometer, tensiometer, temperature, precipitation, and stream-discharge data were analyzed, with particular focus on the possibility of contributions to the perched zones from snowmelt and flow in the neighboring Big Lost River (BLR). Analysis of the timing and magnitude of subsurface dynamics indicate that streamflow provides local recharge to the shallow, intermediate, and deep perched saturated zones within 150 m of the BLR; at greater distances from the BLR the influence of streamflow on recharge is unclear. Perched water-level dynamics in most wells analyzed are consistent with findings from previous geochemical analyses, which suggest that a combination of annual snowmelt and anthropogenic sources (for example, leaky pipes and drainage ditches) contribute to recharge of shallow and

  3. PERSON-CENTERED AND PERSON-ACTIVITY APPROACH AS A BASIS OF INTEGRATIVE LANGUAGE TEACHING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Yulia N. KARPOVA

    2015-01-01

    Full Text Available The article touches upon one of the most acute and complex problems of the modern Russian society the problem of reforming the current system of professional education. The author emphasizes the fact that person – centered and person-activity approach should be the key elements in higher education system modernization as a student personality and his future professional activity should be highlighted in the process of education and upbringing. The author has developed and successfully implemented the integrative language teaching technology, which unites both linguistic and religious knowledge. The article provides a detailed description of the main stages of the process of the technology introduction, the literature and the video materials that were used in the course of the technology implementation in the educational process, as well as formulates conclusions at each stage of its implementation. The effectiveness of the integrative language teaching technology has been proven and is defined by the author as the effect of pedagogical synergy of mutual interaction of several disciplines, characterized by the fact that the influence of the tech nology use exceeds the influence exerted by each discipline as the component of the educational process taken separately.

  4. Evaluating Implementation Fidelity in Health Information Technology Interventions

    Science.gov (United States)

    Eisenstein, Eric L.; Lobach, David F.; Montgomery, Paul; Kawamoto, Kensaku; Anstrom, Kevin J.

    2007-01-01

    Health information technology evaluators need to distinguish between intervention efficacy as assessed in the ideal circumstances of clinical trials and intervention effectiveness as assessed in the real world circumstances of actual practice. Because current evaluation study designs do not routinely allow for this distinction, we have developed a framework for evaluation of implementation fidelity that considers health information technologies as complex interventions and makes use of common intervention components as defined in the Oxford Implementation Index. We also propose statistical methods for the evaluation of interventions at the system and component level using the Rubin Causal Model. We then describe how to apply this framework to evaluate an ongoing clinical trial of three health information technology interventions currently implemented in a 17,000 patient community-based health network caring for Medicaid beneficiaries in Durham County, North Carolina. PMID:18693828

  5. Comparative evaluation of CVD diamond technologies

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, T.R. [General Electric Corporate Research & Development Center, Schenectady, NY (United States)

    1993-01-01

    Chemical vapor deposition (CVD) of diamonds occurs from hydrogen-hydrocarbon gas mixtures in the presence of atomic hydrogen at subatmospheric pressures. Most CVD methods are based on different means of generating and transporting atomic hydrogen in a particular system. Evaluation of these different techniques involves their capital costs, material costs, energy costs, labor costs and the type and quality of diamond that they produce. Currently, there is no universal agreement on which is the best technique and technique selection has been largely driven by the professional background of the user as well as the particular application of interest. This article discusses the criteria for evaluating a process for low-pressure deposition of diamond. Next, a brief history of low-pressure diamond synthesis is reviewed. Several specific processes are addressed, including the hot filament process, hot filament electron-assisted chemical vapor deposition, and plasma generation of atomic hydrogen by glow discharge, microwave discharge, low pressure radio frequency discharge, high pressure DC discharge, high pressure microwave discharge jets, high pressure RF discharge, and high and low pressure flames. Other types of diamond deposition methods are also evaluated. 101 refs., 15 figs.

  6. Evaluation of kidney allograft status using novel ultrasonic technologies

    Directory of Open Access Journals (Sweden)

    Cheng Yang

    2015-07-01

    Full Text Available Early diagnosis of kidney allograft injury contributes to proper decisions regarding treatment strategy and promotes the long-term survival of both the recipients and the allografts. Although biopsy remains the gold standard, non-invasive methods of kidney allograft evaluation are required for clinical practice. Recently, novel ultrasonic technologies have been applied in the evaluation and diagnosis of kidney allograft status, including tissue elasticity quantification using acoustic radiation force impulse (ARFI and contrast-enhanced ultrasonography (CEUS. In this review, we discuss current opinions on the application of ARFI and CEUS for evaluating kidney allograft function and their possible influencing factors, advantages and limitations. We also compare these two technologies with other non-invasive diagnostic methods, including nuclear medicine and radiology. While the role of novel non-invasive ultrasonic technologies in the assessment of kidney allografts requires further investigation, the use of such technologies remains highly promising.

  7. Final evaluation of the acoustics of the APS conference center

    Energy Technology Data Exchange (ETDEWEB)

    Restrepo, J.M.

    1995-11-01

    Along with a description of the changes that I prescribed on the original design, this report is an evaluation of the acoustical properties of the new Advanced Photon Source Auditorium at Argonne National Laboratory. Acoustical deficiencies in the hall are presented with several options for their expedient and economical solution.

  8. Information technology leadership in academic medical centers: a tale of four cultures.

    Science.gov (United States)

    Friedman, C P

    1999-07-01

    Persons and groups within academic medical centers bring consistent and predictable viewpoints to planning and decision making. The varied professional and academic cultures of these individuals appear to account primarily for the diversity of their viewpoints. Understanding these professional cultures can help leaders achieve some predictability in the complex environments for which they are responsible. Leaders in information technology in particular, in order to be successful, must become part-time anthropologists, immersing themselves in the varied workplaces of their constituents to understand the work they do and the cultures that have grown up around this work. Only in this way will they be able to manage the challenges that arise continuously as the technology and the needs it can address change over time. In this article, the author briefly describes the concept of culture, portrays four specific professional cultures that typically coexist in academic medical centers, and argues that understanding these cultures is absolutely critical to effective management and use of information resources.

  9. Anaphylaxis across two Canadian pediatric centers: evaluating management disparities

    Science.gov (United States)

    Lee, Alison YM; Enarson, Paul; Clarke, Ann E; La Vieille, Sébastien; Eisman, Harley; Chan, Edmond S; Mill, Christopher; Joseph, Lawrence; Ben-Shoshan, Moshe

    2017-01-01

    Background There are no data on the percentage of visits due to anaphylaxis in the emergency department (ED), triggers, and management of anaphylaxis across different provinces in Canada. Objective To compare the percentage of anaphylaxis cases among all ED visits, as well as the triggers and management of anaphylaxis between two Canadian pediatric EDs (PEDs). Methods As part of the Cross-Canada Anaphylaxis Registry (C-CARE), children presenting to the British Columbia Children’s Hospital (BCCH) and Montreal Children’s Hospital (MCH) EDs with anaphylaxis were recruited. Characteristics, triggers, and management of anaphylaxis were documented using a standardized data entry form. Differences in demographics, triggers, and management were determined by comparing the difference of proportions and 95% confidence interval. Results Between June 2014 and June 2016, there were 346 visits due to anaphylaxis among 93,730 PED visits at the BCCH ED and 631 anaphylaxis visits among 164,669 pediatric visits at the MCH ED. In both centers, the majority of cases were triggered by food (BCCH 91.3% [88.7, 94.0], MCH 82.4% [79.7, 85.3]), of which peanuts were the most common culprit (24.7% [20.9, 29.9] and 19.0% [15.8, 22.7], respectively). Pre-hospital administration of epinephrine (BCCH 27.7% [23.2, 32.8], MCH 33.1% [29.5, 37.0]) and antihistamines (BCCH 50.6% [45.2, 56.0], MCH 47.1% [43.1, 51.0]) was similar. In-hospital management differed in terms of increased epinephrine, antihistamine, and steroid use at the BCCH (59.2% [53.9, 64.4], 59.8% [54.4, 65.0], and 60.1% [54.7, 65.3], respectively) compared to the MCH (42.2% [38.3, 46.2], 36.2% [32.5, 40.1], and 11.9% [9.5, 14.8], respectively). Despite differences in management, percentage of cases admitted to the intensive care unit was similar between the two centers. Conclusion Compared to previous European and North American reports, there is a high percentage of anaphylaxis cases in two PEDs across Canada with substantial

  10. Evaluation of the Advanced Subsonic Technology Program Noise Reduction Benefits

    Science.gov (United States)

    Golub, Robert A.; Rawls, John W., Jr.; Russell, James W.

    2005-01-01

    This report presents a detailed evaluation of the aircraft noise reduction technology concepts developed during the course of the NASA/FAA Advanced Subsonic Technology (AST) Noise Reduction Program. In 1992, NASA and the FAA initiated a cosponsored, multi-year program with the U.S. aircraft industry focused on achieving significant advances in aircraft noise reduction. The program achieved success through a systematic development and validation of noise reduction technology. Using the NASA Aircraft Noise Prediction Program, the noise reduction benefit of the technologies that reached a NASA technology readiness level of 5 or 6 were applied to each of four classes of aircraft which included a large four engine aircraft, a large twin engine aircraft, a small twin engine aircraft and a business jet. Total aircraft noise reductions resulting from the implementation of the appropriate technologies for each class of aircraft are presented and compared to the AST program goals.

  11. INNOVATIVE TECHNOLOGY EVALUATION REPORT, SEDIMENT SAMPLING TECHNOLOGY, ART'S MANUFACTURING, SPLIT CORE SAMPLER FOR SUBMERGED SEDIMENTS

    Science.gov (United States)

    The Split Core Sampler for Submerged Sediments (Split Core Sampler) designed and fabricated by Arts Manufacturing & Supply, Inc., was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation Program in April and May 1999 at ...

  12. Marshall Space Flight Center Technology Capabilities for Use in Space Situational Awareness Activities

    Science.gov (United States)

    Gagliano, Larry; McLeod, Todd; Hovater, Mary A.

    2017-01-01

    Marshall performs research, integrates information, matures technologies, and enhances science to bring together a diverse portfolio of products and services of interest for Space Situational Awareness (SSA) and Space Asset Management (SAM), all of which can be accessed through partnerships with Marshall. Integrated Space Situational Awareness and Asset Management (ISSAAM) is an initiative of NASA's Marshall Space Flight Center to improve space situational awareness and space asset management through technical innovation, collaboration, and cooperation with U.S. Government agencies and the global space community. Marshall Space Flight Center provides solutions for complex issues with in-depth capabilities, a broad range of experience, and expertise unique in the world, and all available in one convenient location. NASA has longstanding guidelines that are used to assess space objects. Specifically, Marshall Space Flight Center has the capabilities, facilities and expertise to address the challenges that space objects, such as near-Earth objects (NEO) or Orbital Debris pose. ISSAAM's three pronged approach brings together vital information and in-depth tools working simultaneously toward examining the complex problems encountered in space situational awareness. Marshall's role in managing, understanding and planning includes many projects grouped under each prong area: Database/Analyses/Visualization; Detection/Tracking/ Mitigation/Removal. These are not limited to those listed below.

  13. TECHNOLOGY EVALUATION REPORT, HYDROTECHNICS IN SITU FLOW SENSOR

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program evaluated performance of HydroTechnics, Inc. flow sensors in measuring the three-dimensional flow pattern created by operation of the Wasatch Environmental, Inc. (WEI) ground...

  14. Economic evaluation of information technology applications on dairy farms

    NARCIS (Netherlands)

    Asseldonk, van M.A.P.M.

    1999-01-01

    The research described in this thesis focused on the economic evaluation of information technology (IT) applications on dairy farms in order to support investment decisions. The evaluation included a normative (deductive) approach and an empirical (positive) approach. The normative approach predicte

  15. A Survey on Economic-driven Evaluations of Information Technology

    NARCIS (Netherlands)

    Mutschler, B.; Zarvić, N.; Reichert, M.U.

    2007-01-01

    The economic-driven evaluation of information technology (IT) has become an important instrument in the management of IT projects. Numerous approaches have been developed to quantify the costs of an IT investment and its assumed profit, to evaluate its impact on business process performance, and to

  16. Radiation technology facilities operating at the italian ENEA-Casaccia research center

    Energy Technology Data Exchange (ETDEWEB)

    Tata, A.; Festinesi, A.; Rosa, R. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Innovazione

    1998-04-01

    The ENEA Casaccia Research Center, 20 km far from Rome, is the main Italian technological research Center, with more than 2000 scientists involved in several advanced research fields (materials, energy, environment, etc.). Within the frame of radiation technology, three main facilities are in service at full power at the Casaccia research Center: a 1 MW TRIGA Mark II reactor (RC-1); a 5 kW fast source reactor (TAPIRO); a 3.7 x 10{sup 15} Bq Cobalt-60 irradiation plant (CALLIOPE). Main R-D programmes carried out regard medical radioisotopes and radio trackers production, neutron radiography, neutron activation analysis, radiation damage analysis, neutron diffractometry, foodstuffs treatment, crosslinking processes, wastes (hazardous, chemical, hospital) processing. The paper provides a features description of utilized facilities and reports main present carried out projects. [Italiano] Il Centro Ricerca ENEA della casaccia, situato a 20 km circa da Roma, e` il maggiore centro di ricerca tecnologica italiano, con oltre 2000 ricercatori impegnati in numerosi campi di ricerca avanzata (materiali, energia, ambiente, etc.). Nell`ambito delle tecnologie di irraggiamento, sono presenti e pienamente funzionanti presso il C.R. Casaccia tre principali impianti: un reattore termico TRIGA mark II da 1 MW (RC-1); un reattore-sorgente veloce da 5 kW (TAPIRO); un impianto di irraggiamento a Cobalto-60 da 3.7. x 10{sup 15} Bq (CALLIOPE). I principali programmi R-D condotti riguardano la produzione di radioisotopi e radiotraccianti di utilizzo in campo medico, la radiografia neutronica, l`analisi per attivazione neutronica, l`analisi del danno da radiazioni, la diffrattometria neutronica, il trattamento di derrate alimentari, i processi di reticolazione polimerica, il trattamento di rifiuti (tossico-nocivi, chimici, ospedaliri). Il presente lavoro fornisce una descrizione tecnica degli impianti, nonche` indicazioni sui principali programmo condotti attualmente presso tali impienti.

  17. Research Center for Optical Physics: Education and Technology for the 21st Century

    Science.gov (United States)

    2003-01-01

    During the past eleven years since its inception, RCOP has excelled in its two primary goals: 1) training of the scientists and engineers needed for the twenty-first century with special emphasis on underrepresented citizens and 2) research and technological development in areas of relevance to NASA. In the category of research training, as of May 2003, RCOP produced 36 Bachelors degrees, 25 Masters degrees, and 13 Doctoral degrees. Of these, all 36 Bachelors degrees, 16 of the Masters degrees and 9 of the Doctoral degrees were awarded to African Americans. Four of the Doctoral graduates and one of the Masters graduates are working at NASA Field Centers. RCOP has also provided research experiences to 130 undergraduate students and 22 high school students through a number of outreach programs held during the summer and the academic year. RCOP has also been crucial to the development of the Ph.D. program in physics at Hampton University by providing high quality research training and technical electives required for a Doctoral degree in physics. RCOP has also excelled in research and technological development. Since 1992, RCOP researchers have leveraged over 8 million dollars in additional research funding, published 152 papers in refereed journals and proceedings, and given 125 presentations at refereed international conferences in the United States and eight other countries. RCOP also developed numerous collaborations with other research centers, universities and industries. In recognition of this outstanding work, RCOP is the first research center in the United States invited to join the Joint Open Laboratory for Laser Crystals and Precise Laser Systems headed by Dr. Alexander Kaminiskii of the Russian Academy of Sciences.

  18. Redox Biology Course Evaluation Form | Center for Cancer Research

    Science.gov (United States)

    To improve the Redox Biology (RB) course in future years, we would appreciate your feedback by completing this course evaluation. Please score the course elements as poor, fair, average, good or excellent. Please type any comments that you have in response to the questions at the bottom of the form. Remember to include your name as you wish it to appear on the certificate. Thank you for your feedback.

  19. Meeting the Demand for College Student Concerns in College Counseling Centers: Evaluating a Clinical Triage System

    Science.gov (United States)

    Hardy, Jennifer A.; Weatherford, Ryan D.; Locke, Benjamin D.; DePalma, Natalie Hernandez; D'Iuso, Nadia T.

    2011-01-01

    University counseling centers, experiencing an imbalance between student demand and available resources, respond in various ways. The current mixed-method study evaluated one university counseling center transitioning from a wait-list system to a triage method of managing demand. Significant reductions in wait time and increase in attendance were…

  20. Program Evaluation of Community College Learning Assistance Centers: What Do LAC Directors Think?

    Science.gov (United States)

    Franklin, Doug; Blankenberger, Bob

    2016-01-01

    Objective: This study seeks to determine the nature of current program evaluation practices for learning assistance centers (LACs), the practices being used for program evaluation, and whether LAC directors believe their practices are appropriate for evaluating program effectiveness. Method: We conducted a survey (n = 61) of community college LAC…

  1. Program Evaluation of Community College Learning Assistance Centers: What Do LAC Directors Think?

    Science.gov (United States)

    Franklin, Doug; Blankenberger, Bob

    2016-01-01

    Objective: This study seeks to determine the nature of current program evaluation practices for learning assistance centers (LACs), the practices being used for program evaluation, and whether LAC directors believe their practices are appropriate for evaluating program effectiveness. Method: We conducted a survey (n = 61) of community college LAC…

  2. Anaphylaxis across two Canadian pediatric centers: evaluating management disparities

    Directory of Open Access Journals (Sweden)

    Lee AYM

    2016-12-01

    the MCH ED. In both centers, the majority of cases were triggered by food (BCCH 91.3% [88.7, 94.0], MCH 82.4% [79.7, 85.3], of which peanuts were the most common culprit (24.7% [20.9, 29.9] and 19.0% [15.8, 22.7], respectively. Pre-hospital administration of epinephrine (BCCH 27.7% [23.2, 32.8], MCH 33.1% [29.5, 37.0] and antihistamines (BCCH 50.6% [45.2, 56.0], MCH 47.1% [43.1, 51.0] was similar. In-hospital management differed in terms of increased epinephrine, antihistamine, and steroid use at the BCCH (59.2% [53.9, 64.4], 59.8% [54.4, 65.0], and 60.1% [54.7, 65.3], respectively compared to the MCH (42.2% [38.3, 46.2], 36.2% [32.5, 40.1], and 11.9% [9.5, 14.8], respectively. Despite differences in management, percentage of cases admitted to the intensive care unit was similar between the two centers. Conclusion: Compared to previous European and North American reports, there is a high percentage of anaphylaxis cases in two PEDs across Canada with substantial differences in hospital management practices. It is crucial to develop training programs that aim to increase epinephrine use in anaphylaxis. Keywords: anaphylaxis, emergency department, epinephrine, triggers of anaphylaxis, management

  3. Update and Expansion of the Center of Automotive Technology Excellence Under the Graduate Automotive Technology Education (GATE) Program at the University of Tennessee, Knoxville

    Energy Technology Data Exchange (ETDEWEB)

    Irick, David

    2012-08-30

    The Graduate Automotive Technology Education (GATE) Center at the University of Tennessee, Knoxville has completed its seventh year of operation under this agreement, its thirteenth year in total. During this period the Center has involved eleven GATE Fellows and three GATE Research Assistants in preparing them to contribute to advanced automotive technologies in the center’s focus area: Advanced Hybrid Propulsion and Control Systems. In addition to the impact that the Center has had on the students and faculty involved, the presence of the center has led to the acquisition of resources that probably would not have been obtained if the GATE Center had not existed. Significant industry interaction such as equipment donations, and support for GATE students has been realized. The value of the total resources brought to the university (including related research contracts) exceeds $2,000,000.

  4. Student Use of Communication Technologies--Parent/Guardian Survey Report. Survey Research Center Report 2010/8

    Science.gov (United States)

    Julka, Ashley; Stehr, Grady; Parks, Denise; Trechter, David

    2010-01-01

    The purpose of this study was to gain a better understanding of how middle school students and their parents are using technologies and what programs citizens of Wisconsin might need with respect to these technologies. During the month of February 2010, staff from the Survey Research Center (SRC) at the University of Wisconsin-River Falls, Lori…

  5. 76 FR 77578 - In the Matter of: Brendan Technologies, Inc., CenterStaging Corp., PGMI, Inc., Thermal Energy...

    Science.gov (United States)

    2011-12-13

    ... COMMISSION In the Matter of: Brendan Technologies, Inc., CenterStaging Corp., PGMI, Inc., Thermal Energy... concerning the securities of Brendan Technologies, Inc. because it has not filed any periodic reports since... information concerning the securities of Thermal Energy Storage, Inc. because it has not filed any...

  6. 76 FR 2388 - National Toxicology Program (NTP); NTP Interagency Center for the Evaluation of Alternative...

    Science.gov (United States)

    2011-01-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES National Toxicology Program (NTP); NTP Interagency Center for the Evaluation of... Director, National Toxicology Program. BILLING CODE 4140-01-P...

  7. Methane mitigation timelines to inform energy technology evaluation

    Science.gov (United States)

    Roy, Mandira; Edwards, Morgan R.; Trancik, Jessika E.

    2015-11-01

    Energy technologies emitting differing proportions of methane (CH4) and carbon dioxide (CO2) vary significantly in their relative climate impacts over time, due to the distinct atmospheric lifetimes and radiative efficiencies of the two gases. Standard technology comparisons using the global warming potential (GWP) with a fixed time horizon do not account for the timing of emissions in relation to climate policy goals. Here we develop a portfolio optimization model that incorporates changes in technology impacts based on the temporal proximity of emissions to a radiative forcing (RF) stabilization target. An optimal portfolio, maximizing allowed energy consumption while meeting the RF target, is obtained by year-wise minimization of the marginal RF impact in an intended stabilization year. The optimal portfolio calls for using certain higher-CH4-emitting technologies prior to an optimal switching year, followed by CH4-light technologies as the stabilization year approaches. We apply the model to evaluate transportation technology pairs and find that accounting for dynamic emissions impacts, in place of using the static GWP, can result in CH4 mitigation timelines and technology transitions that allow for significantly greater energy consumption while meeting a climate policy target. The results can inform the forward-looking evaluation of energy technologies by engineers, private investors, and policy makers.

  8. Gas-Centered Swirl Coaxial Liquid Injector Evaluations

    Science.gov (United States)

    Cohn, A. K.; Strakey, P. A.; Talley, D. G.

    2005-01-01

    Development of Liquid Rocket Engines is expensive. Extensive testing at large scales usually required. In order to verify engine lifetime, large number of tests required. Limited Resources available for development. Sub-scale cold-flow and hot-fire testing is extremely cost effective. Could be a necessary (but not sufficient) condition for long engine lifetime. Reduces overall costs and risk of large scale testing. Goal: Determine knowledge that can be gained from sub-scale cold-flow and hot-fire evaluations of LRE injectors. Determine relationships between cold-flow and hot-fire data.

  9. A Measurement Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Hendrik Hamann, Levente Klein

    2012-06-28

    Data center (DC) electricity use is increasing at an annual rate of over 20% and presents a concern for the Information Technology (IT) industry, governments, and the society. A large fraction of the energy use is consumed by the compressor cooling to maintain the recommended operating conditions for IT equipment. The most common way to improve the DC efficiency is achieved by optimally provisioning the cooling power to match the global heat dissipation in the DC. However, at a more granular level, the large range of heat densities of today's IT equipment makes the task of provisioning cooling power optimized to the level of individual computer room air conditioning (CRAC) units much more challenging. Distributed sensing within a DC enables the development of new strategies to improve energy efficiency, such as hot spot elimination through targeted cooling, matching power consumption at rack level with workload schedule, and minimizing power losses. The scope of Measurement and Management Technologies (MMT) is to develop a software tool and the underlying sensing technology to provide critical decision support and control for DC and telecommunication facilities (TF) operations. A key aspect of MMT technology is integration of modeling tools to understand how changes in one operational parameter affect the overall DC response. It is demonstrated that reduced ordered models for DC can generate, in less than 2 seconds computational time, a three dimensional thermal model in a 50 kft{sup 2} DC. This rapid modeling enables real time visualization of the DC conditions and enables 'what if' scenarios simulations to characterize response to 'disturbances'. One such example is thermal zone modeling that matches the cooling power to the heat generated at a local level by identifying DC zones cooled by a specific CRAC. Turning off a CRAC unit can be simulated to understand how the other CRAC utilization changes and how server temperature responds

  10. Clinicopathological Evaluation of the Kidney Biopsies: Our Center's Experience

    Directory of Open Access Journals (Sweden)

    Serhan PİŞKİNPAŞA

    2012-05-01

    Full Text Available OBJECTIVES: Kidney biopsy is a valuable tool for both diagnosis and to guide treatment of renal diseases. In this report, we aimed both clinical and pathological evaluation of the kidney biopsies in our institution. MATERIAL and METHODS: Kidney biopsies in adult patients performed between 2002-2011 at the Department of Nephrology were analyzed. Biopsies were performed with the guidance of ultrasonography, and 16 and 18 G needles for two cores were used. At least seven glomeruli and one artery was accepted as adequate for diagnosis. RESULTS: Five hundred thirty six kidney biopsy reports was evaluated. The mean age of the patients at presentation was 42.80±16.66 years (16-85 years old, and 55.4% of the patients was male. The most frequent indication of the kidney biopsies were nephrotic range proteinuria with 63.43%. The most common histopathological diagnosis in primary and secondary glomerular diseases was membranous nephropathy (n=88, 16.4% and amyloidosis (n=96, 17.9% respectively. The most frequent diagnosis of the biopsies performed due to acute kidney injury was rapidly progressing glomerulonephritis (n=20, 3.7%. The major complication rate was low (0.18%. CONCLUSION: Nephrotic range proteinuria was the most frequent indication for the kidney biopsy in our institution. Membranous nephropathy and amyloidosis were the most frequent primary and secondary glomerular diseases. Complication rate in percutaneous kidney biopsy with the guidance of ultrasonography is low.

  11. Integrating Balloon and Satellite Operation Data Centers for Technology Readiness Assessment

    Science.gov (United States)

    Mattiello-Francisco, Fátima; Fernandes, Jose Oscar

    2016-07-01

    Stratospheric balloon-borne experiments have been one of the most effective ways to validate innovative space technology, taking the advantage of reduced development cycles and low cost in launching and operation. In Brazil, the National Institute for Space Research (INPE) has balloon and satellite ground infrastructures since the 1970´s and the 1990´s, respectively. In the recent past, a strategic approach was adopted on the modernization of balloon ground operation facilities for supporting the protoMIRAX experiment, an X-ray imaging telescope under development at INPE as a pathfinder for the MIRAX (Monitor e Imageador de Raios X) satellite mission. The strategic target was to reuse the SATellite Control System (SATCS), a software framework developed to control and monitor INPÉs satellites, for balloon operation. This paper presents the results of that effort and the new ongoing project, a computer-based framework named I2Bso, which strategic target is to Integrate INPÉs Balloon and Satellite Operation data centers. The I2Bso major purpose is to support the continuous assessment of an innovative technology after different qualification flights either on board balloons or satellites in order to acquire growing evidence for the technology maturity.

  12. Geothermal Research at the Geo-Heat Center Oregon Institute of Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lund, John W.

    1997-01-01

    The Geo-Heat Center was established in 1975 to provide information and technical services for geothermal energy direct-use and development--mainly utilizing low- and moderate-temperature resources (<150oC). The Center is funded by the Geothermal Division of the U.S. Department of Energy (USDOE). Our main functions are (1) technical assistance, (2) resource information, (3) advising and referrals, (4) speaker’s bureau, (5) tours of geothermal systems, (6) publications, (7) research, and (8) stocking a geothermal library. During 1997, the Geo-Heat Center staff provided assistance to 761 individuals, companies and municipalities--up to eight hours of technical assistance can be provided free of charge. Staff members have also participated in numerous international geothermal direct-use projects. The Center has developed a “Geothermal Direct Use Engineering and Design Guidebook” and publishes a free “Quarterly Bulletin” on geothermal direct-use projects and research. The Geo-Heat Center also has a website (http://www.oit.edu/~geoheat). Several of these direct-use research projects are discussed in the paper, including: a) Downhole Heat Exchangers, b) A Cost Comparison of Commercial Ground- Source Heat Pump Systems, c) A Spreadsheet for Geothermal Energy Cost Evaluation, d) Utilization of Silica Waste from Geothermal Power Production, e) Fossil Fuel-Fired Peak Heating for Geothermal Greenhouses, f) Selected Cost Considerations for the Geothermal District Heating in Existing Single-Family Residential Areas, and g) Collocated Resources Inventory of Wells and Hot Springs in the Western U.S.

  13. [An Introduction to Methods for Evaluating Health Care Technology].

    Science.gov (United States)

    Lee, Ting-Ting

    2015-06-01

    The rapid and continual advance of healthcare technology makes ensuring that this technology is used effectively to achieve its original goals a critical issue. This paper presents three methods that may be applied by healthcare professionals in the evaluation of healthcare technology. These methods include: the perception/experiences of users, user work-pattern changes, and chart review or data mining. The first method includes two categories: using interviews to explore the user experience and using theory-based questionnaire surveys. The second method applies work sampling to observe the work pattern changes of users. The last method conducts chart reviews or data mining to analyze the designated variables. In conclusion, while evaluative feedback may be used to improve the design and development of healthcare technology applications, the informatics competency and informatics literacy of users may be further explored in future research.

  14. A Systematic Evaluation Model for Solar Cell Technologies

    Directory of Open Access Journals (Sweden)

    Chang-Fu Hsu

    2014-01-01

    Full Text Available Fossil fuels, including coal, petroleum, natural gas, and nuclear energy, are the primary electricity sources currently. However, with depletion of fossil fuels, global warming, nuclear crisis, and increasing environmental consciousness, the demand for renewable energy resources has skyrocketed. Solar energy is one of the most popular renewable energy resources for meeting global energy demands. Even though there are abundant studies on various solar technology developments, there is a lack of studies on solar technology evaluation and selection. Therefore, this research develops a model using interpretive structural modeling (ISM, benefits, opportunities, costs, and risks concept (BOCR, and fuzzy analytic network process (FANP to aggregate experts' opinions in evaluating current available solar cell technology. A case study in a photovoltaics (PV firm is used to examine the practicality of the proposed model in selecting the most suitable technology for the firm in manufacturing new products.

  15. Pinning center evaluation of a YBCO thin film; YBCO hakumaku no pinningu senta hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Michishita, K.; Sasaki, Y.; Higashida, Y.; Kubo, Y. [Japan Fine Ceramics Center, Nagoya (Japan); Nakamura, K. [Nagoya Inst. of Tech., Nagoya (Japan); Takeda, K. [Engineering Research Association for Superconductive Genertion Equipment and Materials, Osaka (Japan)

    1999-06-07

    Line of magnetic flux distribution of YBCO thin film and BSCCO single crystal was evaluated by the Bitter method. Since there is no powerful pinning center, in BSCCO single crystal, which shows low Jc, it is the almost regular line of magnetic flux distribution. For this, in an YBCO thin film which showed high Jc, powerful pinning center such as tilt boundary and heterogenous phase existed, and it was clarified to be the line of magnetic flux distribution without the regularity. This time, an YBCO thin film was evaluated for the purpose of the identification of pinning center. (NEDO)

  16. Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies

    Energy Technology Data Exchange (ETDEWEB)

    David Holloway

    2005-09-30

    Beginning the fall semester of 1999, The University of Maryland, Departments of Mechanical and Electrical Engineering and the Institute for Systems Research served as a U.S. Department of Energy (USDOE) Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies. A key goal was to produce a graduate level education program that educated and prepared students to address the technical challenges of designing and developing hybrid electric vehicles, as they progressed into the workforce. A second goal was to produce research that fostered the advancement of hybrid electric vehicles, their controls, and other related automotive technologies. Participation ended at the University of Maryland after the 2004 fall semester. Four graduate courses were developed and taught during the course of this time, two of which evolved into annually-taught undergraduate courses, namely Vehicle Dynamics and Control Systems Laboratory. Five faculty members from Mechanical Engineering, Electrical Engineering, and the Institute for Systems Research participated. Four Ph.D. degrees (two directly supported and two indirectly supported) and seven Master's degrees in Mechanical Engineering resulted from the research conducted. Research topics included thermoelectric waste heat recovery, fuel cell modeling, pre- and post-transmission hybrid powertrain control and integration, hybrid transmission design, H{sub 2}-doped combustion, and vehicle dynamics. Many of the participating students accepted positions in the automotive industry or government laboratories involved in automotive technology work after graduation. This report discusses the participating faculty, the courses developed and taught, research conducted, the students directly and indirectly supported, and the publication list. Based on this collection of information, the University of Maryland firmly believes that the key goal of the program was met and that the majority of the

  17. A new concept for medical imaging centered on cellular phone technology.

    Directory of Open Access Journals (Sweden)

    Yair Granot

    Full Text Available According to World Health Organization reports, some three quarters of the world population does not have access to medical imaging. In addition, in developing countries over 50% of medical equipment that is available is not being used because it is too sophisticated or in disrepair or because the health personnel are not trained to use it. The goal of this study is to introduce and demonstrate the feasibility of a new concept in medical imaging that is centered on cellular phone technology and which may provide a solution to medical imaging in underserved areas. The new system replaces the conventional stand-alone medical imaging device with a new medical imaging system made of two independent components connected through cellular phone technology. The independent units are: a a data acquisition device (DAD at a remote patient site that is simple, with limited controls and no image display capability and b an advanced image reconstruction and hardware control multiserver unit at a central site. The cellular phone technology transmits unprocessed raw data from the patient site DAD and receives and displays the processed image from the central site. (This is different from conventional telemedicine where the image reconstruction and control is at the patient site and telecommunication is used to transmit processed images from the patient site. The primary goal of this study is to demonstrate that the cellular phone technology can function in the proposed mode. The feasibility of the concept is demonstrated using a new frequency division multiplexing electrical impedance tomography system, which we have developed for dynamic medical imaging, as the medical imaging modality. The system is used to image through a cellular phone a simulation of breast cancer tumors in a medical imaging diagnostic mode and to image minimally invasive tissue ablation with irreversible electroporation in a medical imaging interventional mode.

  18. A new concept for medical imaging centered on cellular phone technology.

    Science.gov (United States)

    Granot, Yair; Ivorra, Antoni; Rubinsky, Boris

    2008-04-30

    According to World Health Organization reports, some three quarters of the world population does not have access to medical imaging. In addition, in developing countries over 50% of medical equipment that is available is not being used because it is too sophisticated or in disrepair or because the health personnel are not trained to use it. The goal of this study is to introduce and demonstrate the feasibility of a new concept in medical imaging that is centered on cellular phone technology and which may provide a solution to medical imaging in underserved areas. The new system replaces the conventional stand-alone medical imaging device with a new medical imaging system made of two independent components connected through cellular phone technology. The independent units are: a) a data acquisition device (DAD) at a remote patient site that is simple, with limited controls and no image display capability and b) an advanced image reconstruction and hardware control multiserver unit at a central site. The cellular phone technology transmits unprocessed raw data from the patient site DAD and receives and displays the processed image from the central site. (This is different from conventional telemedicine where the image reconstruction and control is at the patient site and telecommunication is used to transmit processed images from the patient site). The primary goal of this study is to demonstrate that the cellular phone technology can function in the proposed mode. The feasibility of the concept is demonstrated using a new frequency division multiplexing electrical impedance tomography system, which we have developed for dynamic medical imaging, as the medical imaging modality. The system is used to image through a cellular phone a simulation of breast cancer tumors in a medical imaging diagnostic mode and to image minimally invasive tissue ablation with irreversible electroporation in a medical imaging interventional mode.

  19. Simulation studies for the evaluation of health information technologies

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... and lessons learnt while conducting the study. Although the new electronic medication management system showed tendencies to improve medication safety when compared with the standard system, this tendency was not significant. Altogether, five distinct situations were identified where the new medication...

  20. Simulation Studies for the evaluation of health information technologies:

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner O; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... is not sufficiently mature. Laboratory-based evaluations have also been shown to have insufficient external validity. Simulation studies seem to be a way to bridge this gap. The aim of this study was to evaluate, using a simulation methodology, the impact of a new prototype of an electronic medication management...... and lessons learnt while conducting the study. Although the new electronic medication management system showed tendencies to improve medication safety when compared with the standard system, this tendency was not significant. Altogether, fi ve distinct situations were identifi ed where the new medication...

  1. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Human Exploration and Operations Mission Directorate Projects at Glenn Research Center for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2016-01-01

    This report is intended to help NASA program and project managers incorporate Glenn Research Center Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR) technologies into NASA Human Exploration and Operations Mission Directorate (HEOMD) programs and projects. Other Government and commercial project managers can also find this useful. Introduction Incorporating Small Business Innovation Research (SBIR)-developed technology into NASA projects is important, especially given the Agency's limited resources for technology development. The SBIR program's original intention was for technologies that had completed Phase II to be ready for integration into NASA programs, however, in many cases there is a gap between Technology Readiness Levels (TRLs) 5 and 6 that needs to be closed. After SBIR Phase II projects are completed, the technology is evaluated against various parameters and a TRL rating is assigned. Most programs tend to adopt more mature technologies-at least TRL 6 to reduce the risk to the mission rather than adopt TRLs between 3 and 5 because those technologies are perceived as too risky. The gap between TRLs 5 and 6 is often called the "Valley of Death" (Figure 1), and historically it has been difficult to close because of a lack of funding support from programs. Several papers have already suggested remedies on how to close the gap (Refs. 1 to 4).

  2. The changing role of economic evaluation in valuing medical technologies.

    Science.gov (United States)

    Rotter, Jason S; Foerster, Douglas; Bridges, John Fp

    2012-12-01

    Economic evaluation is established within health-technology assessment but is challenged by those wanting to use economic evaluation to inform pricing and/or incorporate nontraditional sources of value and the views of diverse stakeholders. The changing role of economic evaluation in (formally or informally) assessing prices/values in four jurisdictions (UK, Australia, Germany and USA) is detailed and the authors propose a taxonomy of factors impacting the value of medical technology spanning clinical utility (effectiveness, safety/tolerability and quality of evidence), consumer demand (consumer preferences, process utility and unmet need), economic incentives (innovation, option value and market competition) and the societal perspective (social justice, social values and national interest). The authors suggest that multicriteria decision analysis methods grounded in hedonic-pricing theory can facilitate the valuing/pricing of medical technologies. The use of such an approach is hindered by a paucity of relevant educational opportunities, vested interests and aversion to placing prices/values on health.

  3. Evaluation for Applied Materials of Eco-technology

    Institute of Scientific and Technical Information of China (English)

    张俊斌; 梁大庆; 陈洁音; 翁韶良

    2005-01-01

    The eco-materials (include natural and artificial material) applied in the eco-technology in internal currently,usually lack of evaluation for applicative conditions.Hence,this study carry on the whole research and identifications to draft the eco-materials of eco-technology.The evaluation models of applied materials for eco-technology were proposed.The quantitative score were obtained by expert's person evaluation.Three models were proposed to quantify the effects of applied materials on the ecological environment.The statistical procedures were adopted to compare the performance of these materials for eco-technology.The results indicated that the comparison of applied materials can be treated by quantitative analysis.For the further analysis,more evaluated data from expert's experience need to be collected then the bias of person subject can be reduced.In addition to reach the benefits in the respects of ecosystem,society,economy and function,also practice the comprehensive effects in eco-technology.

  4. A framework for evaluation of technology transfer programs. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    The objective of this volume is to describe a framework with which DOE can develop a program specific methodology to evaluate it`s technology transfer efforts. This approach could also be applied to an integrated private sector technology transfer organization. Several benefits will be realized from the application of this work. While the immediate effect will be to assist program managers in evaluating and improving program performance, the ultimate benefits will accrue to the producing industry, the states, and the nation in the form of sustained or increased domestic oil production. This benefit depends also, of course, on the effectiveness of the technology being transferred. The managers of the Technology Transfer program, and the larger federal oil and gas R&D programs, will be provided with a means to design and assess the effectiveness of program efforts as they are developed, tested and performed. The framework allows deficiencies in critical aspects of the program to be quickly identified, allowing for timely corrections and improvements. The actual process of developing the evaluation also gives the staff of the Oil R&D Program or Technology Transfer subprogram the opportunity to become oriented to the overall program goals. The structure and focus imposed by the evaluation paradigm will guide program staff in selecting activities which are consistent with achieving the goals of the overall R&D program.

  5. 75 FR 54343 - Center for Biologics Evaluation and Research eSubmitter Pilot Evaluation Program for Blood...

    Science.gov (United States)

    2010-09-07

    ...The Food and Drug Administration (FDA), Center for Biologics Evaluation and Research (CBER) is announcing an invitation to participate in a pilot evaluation program for CBER's eSubmitter Program (eSubmitter). CBER's eSubmitter has been customized as an automated biologics license application (BLA) and BLA supplement (BLS) submission system for blood and blood components. Participation in the......

  6. Environment, Safety and Health Progress Assessment of the Morgantown Energy Technology Center (METC)

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    This report documents the result of the US Department of Energy`s (DOE) Environment, Safety and Health (ES&H) Progress Assessment of the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. METC is currently a research and development facility, managed by DOE`s Office of Fossil Energy. Its goal is to focus energy research and development to develop engineered fossil fuel systems, that are economically viable and environmentally sound, for commercial application. There is clear evidence that, since the 1991 Tiger Team Assessment, substantial progress has been made by both FE and METC in most aspects of their ES&H program. The array of new and restructured organizations, systems, and programs at FE and METC; increased assignments of staff to support these initiatives; extensive training activities; and the maturing planning processes, all reflect a discernable, continuous improvement in the quality of the ES&H performance.

  7. Electric Power Research Institute, Environmental Control Technology Center monthly report to the Steering Committee, June 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-11-02

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot FGD unit continued this month with High Velocity Scrubbing and the Tampa Electric Company (TECO) Tailored Collaboration test block. Additionally, Phase III of the Toxics Removal/Carbon Injection test block was conducted concurrently with FGD testing. At the beginning of the month, a second phase of third-party testing began for Suncor, Inc. The Suncor Gypsum Sample Collection test block (MSUN) began on June 5 on the 0.4 MW Mini-Pilot Wet FGD unit. Testing was completed on June 13. On the Cold-Side Selective Catalytic Reduction (SCR) unit, testing continued this month as ammonia slip measurements were conducted under low catalyst inlet temperatures and at baseline conditions.

  8. Technology Development for Hydrogen Propellant Storage and Transfer at the Kennedy Space Center (KSC)

    Science.gov (United States)

    Youngquist, Robert; Starr, Stanley; Krenn, Angela; Captain, Janine; Williams, Martha

    2016-01-01

    The National Aeronautics and Space Administration (NASA) is a major user of liquid hydrogen. In particular, NASA's John F. Kennedy (KSC) Space Center has operated facilities for handling and storing very large quantities of liquid hydrogen (LH2) since the early 1960s. Safe operations pose unique challenges and as a result NASA has invested in technology development to improve operational efficiency and safety. This paper reviews recent innovations including methods of leak and fire detection and aspects of large storage tank health and integrity. We also discuss the use of liquid hydrogen in space and issues we are addressing to ensure safe and efficient operations should hydrogen be used as a propellant derived from in-situ volatiles.

  9. Calcine Waste Storage at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    M. D. Staiger

    1999-06-01

    A potential option in the program for long-term management of high-level wastes at the Idaho Nuclear Technology and Engineering Center (INTEC), at the Idaho National Engineering and Environmental Laboratory, calls for retrieving calcine waste and converting it to a more stable and less dispersible form. An inventory of calcine produced during the period December 1963 to May 1999 has been prepared based on calciner run, solids storage facilities operating, and miscellaneous operational information, which gives the range of chemical compositions of calcine waste stored at INTEC. Information researched includes calciner startup data, waste solution analyses and volumes calcined, calciner operating schedules, solids storage bin capacities, calcine storage bin distributor systems, and solids storage bin design and temperature monitoring records. Unique information on calcine solids storage facilities design of potential interest to remote retrieval operators is given.

  10. Current Development of Nuclear Thermal Propulsion technologies at the Center for Space Nuclear Research

    Energy Technology Data Exchange (ETDEWEB)

    Robert C. O' Brien; Steven K. Cook; Nathan D. Jerred; Steven D. Howe; Ronald Samborsky; Daniel Brasuell

    2012-09-01

    Nuclear power and propulsion has been considered for space applications since the 1950s. Between 1955 and 1972 the US built and tested over twenty nuclear reactors / rocket engines in the Rover/NERVA programs1. The Aerojet Corporation was the prime contractor for the NERVA program. Modern changes in environmental laws present challenges for the redevelopment of the nuclear rocket. Recent advances in fuel fabrication and testing options indicate that a nuclear rocket with a fuel composition that is significantly different from those of the NERVA project can be engineered; this may be needed to ensure public support and compliance with safety requirements. The Center for Space Nuclear Research (CSNR) is pursuing a number of technologies, modeling and testing processes to further the development of safe, practical and affordable nuclear thermal propulsion systems.

  11. Center for Technology for Advanced Scientific Component Software (TASCS) Consolidated Progress Report July 2006 - March 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bernholdt, D E; McInnes, L C; Govindaraju, M; Bramley, R; Epperly, T; Kohl, J A; Nieplocha, J; Armstrong, R; Shasharina, S; Sussman, A L; Sottile, M; Damevski, K

    2009-04-14

    A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

  12. Addressing data center efficiency. Lessons learned from process evaluations of utility energy efficiency programs

    Energy Technology Data Exchange (ETDEWEB)

    Howard, A.J.; Holmes, J. [Energy Market Innovations, Inc, 83 Columbia St., Suite 303, Seattle, WA 98104 (United States)

    2012-01-15

    This paper summarizes the unique challenges related to addressing energy efficiency in the data center industry and lessons learned from original research and two process evaluations of energy efficiency programs with components that specifically target data centers. The lessons learned include: creating program opportunities specifically focused on data centers; clearly identifying target data centers able to implement energy efficiency programs; understanding decision making in these facilities; and effectively communicating the program opportunities to the target market. The growing energy use of data centers has drawn international attention from policy makers, regulators, industry consortiums, and electric utilities. Any program effective at improving the energy performance of data centers must include specific strategies and processes aimed at confronting a number of challenges specific to this industry, including: the concentrated and rapidly growing energy use of these facilities; the rapid pace of innovation; the extremely high reliability requirements; and the significant split incentives due to the typical data center management structure. The process evaluations covered in this paper are the Pacific Gas and Electric (PG and E) High-Tech program and the Silicon Valley Power (SVP) Public Benefits Program. While the PG and E evaluation was a more complete process evaluation, the SVP evaluation focused specifically on participation from co-location facilities. These process evaluations together included interviews with program participants, nonparticipants and utility staff and also included outreach to a large variety of industry stakeholders. In addition, the PG and E evaluation included detailed process-mapping used to identify the necessity and importance of all program processes. The insights gathered from these evaluations are not only applicable to US electrical utilities but can also be applied to any international organization looking to create

  13. Evaluation of Aqua-Ammonia Chiller Technologies and Field Site Installation

    Energy Technology Data Exchange (ETDEWEB)

    Zaltash, Abdolreza [ORNL

    2007-09-01

    The Naval Facilities Engineering Service Center (NFESC) has sponsored Oak Ridge National Laboratory (ORNL) to review, select, and evaluate advanced, gas-fired, 5-ton, aqua-ammonia, chiller technologies. The selection criteria was that units have COP values of 0.67 or better at Air-conditioning and Refrigeration Institute (ARI) 95 F outdoor rating conditions, an active refrigerant flow control, and a variable-speed condenser fan. These features are expected to allow these units to operate at higher ambient temperatures (up to the maximum operating temperature of 110 F) with minimal degradation in performance. ORNL evaluated three potential manufacturers of advanced, gas-fired, 5-ton, aqua-ammonia chillers-Robur, Ambian, and Cooling Technologies. Unfortunately, Robur did not meet the COP requirements and Cooling Technologies could not deliver a unit to be tested at the U.S. Department of Energy (DOE)-ORNL environmental chamber testing facility for thermally activated heat pumps. This eliminated these two technologies from further consideration, leaving only the Ambian chillers for evaluation. Two Ambian chillers were evaluated at the DOE-ORNL test facility. Overall these chillers operated well over a wide range of ambient conditions with minimal degradation in performance due to several control strategies used such as a variable speed condenser fan, a modulating burner, and active refrigerant flow control. These Ambian pre-commercial units were selected for installation and field testing at three federal facilities. NFESC worked with ORNL to assist with the site selection for installation and evaluation of these chillers. Two sites (ORNL and Naval Surface Warfare Center [NSWC] Corona) had a single chiller unit installed; and at one site (Naval Amphibious Base [NAB] Little Creek), two 5-ton chillers linked together were installed to provide 10 tons of cooling. A chiller link controller developed under this project was evaluated in the field test at Little Creek.

  14. TECHNOLOGY EVALUATION REPORT: SILICATE TECHNOLOGY CORPORATION - SOLIDIFICATION/STABILIZATION OF PCP AND INORGANIC CONTAMINANTS IN SOILS - SELMA, CA

    Science.gov (United States)

    This Technolgy Evaluation Report evaluates the solidification/stabilization process of Silicate Technology Corporation (STC) for the on-site treatment of contaminated soil The STC immobilization technology uses a proprietary product (FMS Silicate) to chemically stabilize and ...

  15. NASA Education and Educational Technologies Exemplified by the Space Weather Action Center Program

    Science.gov (United States)

    Reis, Norma Teresinha Oliveira; André, Claudio; Cline, Troy D.; Eastman, Timothy E.; Maher, Margaret J.; Mayo, Louis A.; Lewis, Elaine M.

    We explore here the Space Weather Action Center (SWAC) Program, as an example of NASA initiatives in education. Many human activities in space can be disrupted by space weather. The main objective of this program is to enable students to produce space weather forecasts by accessing current NASA data. Implementation of the SWAC Program requires: technological resources, online materials, and systematic work. Instructional guides, materials and methods are explained on the Space Weather Action Center Web site (http://sunearthday.nasa.gov/swac). Ultimately, students’ forecasts can be presented through a variety of accessible media including inexpensive video editing software and/or already existing school-based broadcast studios. This cross-curricular program is targeted to middle and high school and can be applied in almost all educational contexts as the number of schools with computer and internet access increases worldwide. SWAC is a pioneer initiative that contributes to fostering student interest in STEM and promotes their intellectual autonomy. Through SWAC, they get to act like real scientists by accessing, analyzing, recording, and communicating space weather forecasts in a professional approach.

  16. Technology Evaluation Workshop Report for Tank Waste Chemical Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Eberlein, S.J.

    1994-04-01

    A Tank Waste Chemical Characterization Technology Evaluation Workshop was held August 24--26, 1993. The workshop was intended to identify and evaluate technologies appropriate for the in situ and hot cell characterization of the chemical composition of Hanford waste tank materials. The participants were asked to identify technologies that show applicability to the needs and good prospects for deployment in the hot cell or tanks. They were also asked to identify the tasks required to pursue the development of specific technologies to deployment readiness. This report describes the findings of the workshop. Three focus areas were identified for detailed discussion: (1) elemental analysis, (2) molecular analysis, and (3) gas analysis. The technologies were restricted to those which do not require sample preparation. Attachment 1 contains the final workshop agenda and a complete list of attendees. An information package (Attachment 2) was provided to all participants in advance to provide information about the Hanford tank environment, needs, current characterization practices, potential deployment approaches, and the evaluation procedure. The participants also received a summary of potential technologies (Attachment 3). The workshop opened with a plenary session, describing the background and issues in more detail. Copies of these presentations are contained in Attachments 4, 5 and 6. This session was followed by breakout sessions in each of the three focus areas. The workshop closed with a plenary session where each focus group presented its findings. This report summarizes the findings of each of the focus groups. The evaluation criteria and information about specific technologies are tabulated at the end of each section in the report. The detailed notes from each focus group are contained in Attachments 7, 8 and 9.

  17. Results of advanced batter technology evaluations for electric vehicle applications

    Energy Technology Data Exchange (ETDEWEB)

    DeLuca, W.H.; Gillie, K.R.; Kulaga, J.E.; Smaga, J.A.; Tummillo, A.F.; Webster, C.E.

    1992-01-01

    Advanced battery technology evaluations are performed under simulated electric-vehicle operating conditions at the Analysis Diagnostic Laboratory (ADL) of Argonne National Laboratory. The ADL results provide insight Into those factors that limit battery performance and life. The ADL facilities include a test laboratory to conduct battery experimental evaluations under simulated application conditions and a post-test analysis laboratory to determine, In a protected atmosphere if needed, component compositional changes and failure mechanisms. This paper summarizes the performance characterizations and life evaluations conducted during 1991--1992 on both single cells and multi-cell modules that encompass eight battery technologies (Na/S, Li/MS (M=metal), Ni/MH, Ni/Cd, Ni/Zn, Ni/Fe, Zn/Br, and Pb-acid). These evaluations were performed for the Department of Energy, Office of Transportation Technologies, Electric and Hybrid Propulsion Division, and the Electric Power Research Institute. The ADL provides a common basis for battery performance characterization and life evaluations with unbiased application of tests and analyses. The results help identify the most-promising R D approaches for overcoming battery limitations, and provide battery users, developers, and program managers with a measure of the progress being made in battery R D programs, a comparison of battery technologies, and basic data for modeling.

  18. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Kwon, J. D. [Yeungnam Univ., Gyeongsan (Korea, Republic of); Kang, K. J. [Chonnam National Univ., Gwangju (Korea, Republic of)] (and others)

    2001-03-15

    This research focuses on development of reliable life evaluation technology for nuclear power plant (NPP) components, and is divided into two parts, development of life evaluation systems for pressurized components and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered: development of expert systems for integrity assessment of pressurized components, development of integrity evaluation systems of steam generator tubes, prediction of failure probability for NPP components based on probabilistic fracture mechanics, development of fatigue damage evaluation technique for plant life extension, domestic round robin analysis for pressurized thermal shock of reactor vessels, domestic round robin analysis of constructing P--T limit curves for reactor vessels, and development of data base for integrity assessment. For evaluation of applicability of emerging technology to operating plants, on the other hand, the following eight topics are covered: applicability of the Leak-Before-Break analysis to Cast S/S piping, collection of aged material tensile and toughness data for aged Cast S/S piping, finite element analyses for load carrying capacity of corroded pipes, development of Risk-based ISI methodology for nuclear piping, collection of toughness data for integrity assessment of bi-metallic joints, applicability of the Master curve concept to reactor vessel integrity assessment, measurement of dynamic fracture toughness, and provision of information related to regulation and plant life extension issues.

  19. Technical cooperation front line. JICA technology cooperation project in Indonesia and Vietnam (Coal mining technology enhancement project in Indonesia); (Coal Mine Firedamp Gas Management Center in Vietnam)

    Energy Technology Data Exchange (ETDEWEB)

    Inami, K. [Japan Coal Energy Center (Japan). Technical Service Group, Engineering Dept.

    2002-09-01

    In April 2001, two coal mining technical cooperation projects of Japan International Cooperation Agency (JICA) started. The first project is 'Coal Mining Technology Enhancement Project in Indonesia'. The second project is 'Coal Mine Firedamp Gas Management Center in Vietnam'. Both are project-type technical cooperation for the technology transfer centering in advanced Japanese underground coal mine technologies for a five years project period from April 1 2001 to 31 March 2006. Japan Coal Energy Center (JCOAL) have carried out indirect supporting function for the planning and the execution of the project from the preparation phase of the project start-up as a supporting agency based on the business agreement with JICA. This paper reports the projects development. 2 figs., 1 tab.

  20. Lyndon B. Johnson Space Center (JSC) proposed dual-use technology investment program in intelligent robots

    Science.gov (United States)

    Erikson, Jon D.

    1994-01-01

    This paper presents an overview of the proposed Lyndon B. Johnson Space Center (JSC) precompetitive, dual-use technology investment project in robotics. New robotic technology in advanced robots, which can recognize and respond to their environments and to spoken human supervision so as to perform a variety of combined mobility and manipulation tasks in various sectors, is an obejective of this work. In the U.S. economy, such robots offer the benefits of improved global competitiveness in a critical industrial sector; improved productivity by the end users of these robots; a growing robotics industry that produces jobs and profits; lower cost health care delivery with quality improvements; and, as these 'intelligent' robots become acceptable throughout society, an increase in the standard of living for everyone. In space, such robots will provide improved safety, reliability, and productivity as Space Station evolves, and will enable human space exploration (by human/robot teams). The proposed effort consists of partnerships between manufacturers, universities, and JSC to develop working production prototypes of these robots by leveraging current development by both sides. Currently targeted applications are in the manufacturing, health care, services, and construction sectors of the U.S. economy and in the inspection, servicing, maintenance, and repair aspects of space exploration. But the focus is on the generic software architecture and standardized interfaces for custom modules tailored for the various applications allowing end users to customize a robot as PC users customize PC's. Production prototypes would be completed in 5 years under this proposal.

  1. Impelementation of Information Technology Service Management at Data And Information System Center of XYZ University

    Directory of Open Access Journals (Sweden)

    Kornelius Irfandhi

    2016-03-01

    Full Text Available Information Technology (IT is increasingly progressing. Nowadays, the success of a business of the organization/company is highly dependent on the IT infrastructure used. Therefore, organizations/companies have to manage their IT service to be optimal to their customers. Looking at this matter and the increasing dynamics of XYZ University, then Data and Information System Center (Pusdatin - an IT provider of XYZ University began implementing IT Service Management (ITSM from 2013 using the latest version of Information Technology Infrastructure Library (ITIL, namely ITIL v3 as a framework for implementing ITSM in its business processes. However, along the way, there are still some problems happen in Pusdatin in order that ITSM can actually support and align with the objectives of XYZ University. Through this paper, the authors want to explain how the implementation of ITSM at Pusdatin, identify the problems related to the implementation of ITSM, and provide the solutions for each problem. The methods used are direct observation to Pusdatin, conductan interview with the Head of Pusdatin and Staff of Pusdatin, and also perform a literature review of books and papers that discuss about ITIL. The result of this research is that ITSM process of Pusdatin generally works quite well but there are still some shortcomings because ITSM is not 100% implemented in all areas.

  2. Recent Stirling Conversion Technology Developments and Operational Measurements at NASA Glenn Research Center

    Science.gov (United States)

    Oriti, Salvatore M.; Schifer, Nicholas A.

    2010-01-01

    In support of the Advanced Stirling Radioisotope Generator (ASRG) project and other potential applications, NASA Glenn Research Center (GRC) has initiated convertor technology development efforts in the areas of acoustic emission, electromagnetic field mitigation, thermoacoustic Stirling conversion, and multiple-cylinder alpha arrangements of Stirling machines. The acoustic emission measurement effort was developed as a health monitoring metric for several Stirling convertors undergoing life testing. While accelerometers have been used in the past to monitor dynamic signature, the acoustic sensors were chosen to monitor cycle events, such gas bearing operation. Several electromagnetic interference (EMI) experiments were performed on a pair of Advanced Stirling Convertors (ASC). These tests demonstrated that a simple bucking coil was capable of reducing the alternating current (ac) magnetic field below the ASRG system specification. The thermoacoustic Stirling concept eliminates the displacer typically found in Stirling machines by making use of the pressure oscillations of a traveling acoustic wave. A 100 W-class thermoacoustic Stirling prototype manufactured by Northrop Grumman Space and Technology was received and tested. Another thermoacoustic prototype designed and fabricated by Sunpower, Inc., will be tested in the near future. A four cylinder free piston alpha prototype convertor was received from Sunpower, Inc. and has been tested at GRC. This hardware was used as a proof of concept to validate thermodynamic models and demonstrate stable operation of multiple-cylinder free-piston Stirling conversion. This paper will discuss each of these activities and the results they produced.

  3. NASA's Corrosion Technology Laboratory at the Kennedy Space Center: Anticipating, Managing, and Preventing Corrosion

    Science.gov (United States)

    Calle, Luz Marina

    2015-01-01

    The marine environment at NASAs Kennedy Space Center (KSC) has been documented by ASM International (formerly American Society for Metals) as the most corrosive in North America. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pads were rendered even more severe by the highly corrosive hydrochloric acid (HCl) generated by the solid rocket boosters (SRBs). Numerous failures at the launch pads are caused by corrosion. The structural integrity of ground infrastructure and flight hardware is critical to the success, safety, cost, and sustainability of space missions. NASA has over fifty years of experience dealing with unexpected failures caused by corrosion and has developed expertise in corrosion control in the launch and other environments. The Corrosion Technology Laboratory at KSC evolved, from what started as an atmospheric exposure test site near NASAs launch pads, into a capability that provides technical innovations and engineering services in all areas of corrosion for NASA, external partners, and customers.This paper provides a chronological overview of NASAs role in anticipating, managing, and preventing corrosion in highly corrosive environments. One important challenge in managing and preventing corrosion involves the detrimental impact on humans and the environment of what have been very effective corrosion control strategies. This challenge has motivated the development of new corrosion control technologies that are more effective and environmentally friendly. Strategies for improved corrosion protection and durability can have a huge impact on the economic sustainability of human spaceflight operations.

  4. Evaluation of a technology enabled garment for older walkers.

    Science.gov (United States)

    Burns, William P; Nugent, Chris D; McCullagh, Paul J; Finlay, Dewar D; Cleland, Ian; Scotney, Bryan W; McClean, Sally I; McCann, Jane; Gueldenring, Daniel

    2012-01-01

    Walking is often cited as the best form of activity for persons over the age of 60. In this paper we outline the development and evaluation of a smart garment system that aims to monitor the wearer's wellbeing and activity regimes during walking activities. Functional requirements were ascertained using a combination of questionnaires and two workshops with a target cohort. The requirements were subsequently mapped onto current technologies as part of the technical design process. In this paper we outline the development and second round of evaluations of a prototype as part of a three-phase iterative development cycle. The evaluation was undertaken with 6 participants aged between 60 and 73 years of age. The results of the evaluation demonstrate the potential role that technology can play in the promotion of activity regimes for the older population.

  5. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Kim, Yun Jae; Choi, Jae Boong [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2002-03-15

    This project focuses on developing reliable life evaluation technology for nuclear power plant components, and is divided into two parts, development of a life evaluation system for nuclear pressure vessels and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered in this project: defect assessment method for steam generator tubes, development of fatigue monitoring system, assessment of corroded pipes, domestic round robin analysis for constructing P-T limit curve for RPV, development of probabilistic integrity assessment technique, effect of aging on strength of dissimilar welds, applicability of LBB to cast stainless steel, and development of probabilistic piping fracture mechanics.

  6. 75 FR 57027 - National Toxicology Program (NTP); NTP Interagency Center for the Evaluation of Alternative...

    Science.gov (United States)

    2010-09-17

    ... technical evaluations of new, revised, and alternative methods with regulatory applicability, and promotes... HUMAN SERVICES National Toxicology Program (NTP); NTP Interagency Center for the Evaluation of..., Director, NICEATM, NIEHS, P.O. Box 12233, Mail Stop: K2-16, Research Triangle Park, NC 27709, (telephone...

  7. 75 FR 6401 - Medical Devices Regulated by the Center for Biologics Evaluation and Research; Availability of...

    Science.gov (United States)

    2010-02-09

    ... Evaluation and Research; Availability of Summaries of Safety and Effectiveness Data for Premarket Approval... safety and effectiveness data to the Division of Dockets Management (HFA-305), Food and Drug... the Center for Biologics Evaluation and Research (CBER). This list is intended to inform the public...

  8. Quality, technology and outcomes: evolution and evaluation of new treatments and/or new technology.

    Science.gov (United States)

    Fraass, Benedick A; Moran, Jean M

    2012-01-01

    The pace of technological innovation and adoption continues to increase each year, and the field of Radiation Oncology struggles to react appropriately to the changes and potential improvements in treatment which hopefully will result from this innovation. The standard methods used in the past to test new technology and treatment techniques are often no longer appropriate for this fast-changing environment. This paper uses examples from radiotherapy technological developments over the last decades to illustrate issues which need to be solved in order to study and evaluate potential advances, and then describes several improved ways to study new techniques and technology. Design of appropriate studies can help us improve patient care while at the same time documenting which new clinical strategies, enabled by new technology, lead to improved patient outcomes.

  9. NASA's Corrosion Technology Laboratory at the Kennedy Space Center: Anticipating, Managing, and Preventing Corrosion

    Science.gov (United States)

    Calle, Luz Marina

    2014-01-01

    Corrosion is the degradation of a material that results from its interaction with the environment. The marine environment at NASAs Kennedy Space Center (KSC) has been documented by ASM International (formerly American Society for Metals) as the most corrosive in the United States. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pads were rendered even more severe by the 70 tons of highly corrosive hydrochloric acid that were generated by the solid rocket boosters. Numerous failures at the launch pads are caused by corrosion.The structural integrity of ground infrastructure and flight hardware is critical to the success, safety, cost, and sustainability of space missions. As a result of fifty years of experience with launch and ground operations in a natural marine environment that is highly corrosive, NASAs Corrosion Technology Laboratory at KSC is a major source of corrosion control expertise in the launch and other environments. Throughout its history, the Laboratory has evolved from what started as an atmospheric exposure facility near NASAs launch pads into a world-wide recognized capability that provides technical innovations and engineering services in all areas of corrosion for NASA and external customers.This presentation will provide a historical overview of the role of NASAs Corrosion Technology in anticipating, managing, and preventing corrosion. One important challenge in managing and preventing corrosion involves the detrimental impact on humans and the environment of what have been very effective corrosion control strategies. This challenge has motivated the development of new corrosion control technologies that are more effective and environmentally friendly. Strategies for improved corrosion protection and durability can have a huge impact on the economic sustainability of human spaceflight operations.

  10. Development of a Set of Indicators to Evaluate Injury Control Research Centers.

    Science.gov (United States)

    Runyan, Carol; Garrettson, Mariana; Yee, Sue Lin

    2014-04-01

    Few methods have been defined for evaluating the individual and collective impacts of academic research centers. In this project, with input from injury center directors, we systematically defined indicators to assess the progress and contributions of individual Injury Control Research Centers (ICRCs) and, ultimately, to monitor progress of the overall injury center program. We used several methods of deriving a list of recommended priority and supplemental indicators. This included published literature review, telephone interviews with selected federal agency staff, an e-mail survey of injury center directors, an e-mail survey of staff at the Centers for Disease Control and Prevention, a two-stage Delphi process (e-mailed), and an in-person focus group with injury center directors. We derived the final indicators from an analysis of ratings of potential indicators by center directors and CDC staff. We also examined qualitative responses to open-ended items that address conceptual and implementation issues. All currently funded ICRCs participated in at least one part of the process, resulting in a list of 27 primary indicators (some with subcomponents), 31 supplemental indicators, and multiple suggestions for using the indicators. Our results support an approach that combines standardized definitions and quantifiable indicators with qualitative reporting, which allows consideration of center distinctions and priorities. The center directors urged caution in using the indicators, given funding constraints and recognition of unique institutional environments. While focused on injury research centers, we suggest these indicators also may be useful to academic research centers of other types. © The Author(s) 2014.

  11. X-231B technology demonstration for in situ treatment of contaminated soil: Technology evaluation and screening

    Energy Technology Data Exchange (ETDEWEB)

    Siegrist, R.L.; Morris, M.I.; Donaldson, T.L.; Palumbo, A.V.; Herbes, S.E.; Jenkins, R.A.; Morrissey, C.M.; Harris, M.T.

    1993-08-01

    The Portsmouth Gaseous Diffusion Plant (Ports) is located approximately 70 miles south of Columbus in southern Ohio. Among the several waste management units on the facility, the X-231B unit consists of two adjacent oil biodegradation plots. The plots encompass {approximately} 0.8 acres and were reportedly used from 1976 to 1983 for the treatment and disposal of waste oils and degreasing solvents, some containing uranium-235 and technetium-99. The X-231B unit is a regulated solid waste management unit (SWMU) under the Resource Conservation and Recovery Act (RCRA). The X-231B unit is also a designated SWMU located within Quadrant I of the site as defined in an ongoing RCRA Facilities Investigation and Corrective Measures Study (RFI/CMS). Before implementing one or more Technology Demonstration Project must be completed. The principal goal of this project was to elect and successfully demonstrate one ore more technologies for effective treatment of the contaminated soils associated with the X-231B unit at PORTS. The project was divided into two major phases. Phase 1 involved a technology evaluation and screening process. The second phase (i.e., Phase 2) was to involve field demonstration, testing and evaluation of the technology(s) selected during Phase 1. This report presents the methods, results, and conclusions of the technology evaluation and screening portion of the project.

  12. Distribution of male infertility specialists in relation to the male population and assisted reproductive technology centers in the United States.

    Science.gov (United States)

    Nangia, Ajay K; Likosky, Donald S; Wang, Dongmei

    2010-07-01

    To describe the spatial distribution of assisted reproductive technology (ART) centers and male infertility specialists by location, driving distance from ART center, and potential male population in need of these resources. Cross-sectional study. Male population in the reproductive years (20-49 years old) based on U.S. Census Bureau data in 2000. Urology male infertility specialists as defined by 2005 specialty society membership directories. ART centers registered with the Society for Assisted Reproductive Technology in 2005. Male population and male infertility specialists within the service area served by in-state and neighboring-state ART centers, as defined by a 60-minute travel time. One hundred ninety-seven male infertility specialists and 390 ART centers were identified. On a state level, the highest male population in the reproductive years was seen in California, Texas, and Florida. The highest male populations per male specialist were found in Oregon, Tennessee, and Oklahoma. The highest number of ART centers per male specialist was found in Tennessee. The highest proximities of male specialists within the 60-minute driving service area of different ART centers were found in the North East and Southern California. The Midwest to Northwest had the least. A disparity of urology male infertility specialists exists in the United States, with large areas of the country being underserved and overserved based on the location of ART centers. Copyright 2010 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  13. Evaluating the Feasibility of Using Remote Technology for Cochlear Implants

    Science.gov (United States)

    Goehring, Jenny L.; Hughes, Michelle L.; Baudhuin, Jacquelyn L.

    2012-01-01

    The use of remote technology to provide cochlear implant services has gained popularity in recent years. This article contains a review of research evaluating the feasibility of remote service delivery for recipients of cochlear implants. To date, published studies have determined that speech-processor programming levels and other objective tests…

  14. Strategic Evaluation of University Knowledge and Technology Transfer Effectiveness

    Science.gov (United States)

    Tran, Thien Anh

    2013-01-01

    Academic knowledge and technology transfer has been growing in importance both in academic research and practice. A critical question in managing this activity is how to evaluate its effectiveness. The literature shows an increasing number of studies done to address this question; however, it also reveals important gaps that need more research.…

  15. Strategic Evaluation of University Knowledge and Technology Transfer Effectiveness

    Science.gov (United States)

    Tran, Thien Anh

    2013-01-01

    Academic knowledge and technology transfer has been growing in importance both in academic research and practice. A critical question in managing this activity is how to evaluate its effectiveness. The literature shows an increasing number of studies done to address this question; however, it also reveals important gaps that need more research.…

  16. Technological Effects on Aesthetic Evaluation: Vermeer and the Camera Obscura

    Science.gov (United States)

    Hantula, Donald A.; Sudduth, Mary Margaret; Clabaugh, Alison

    2009-01-01

    The question of whether an artist's use of technology to create art results in a detectable aesthetic difference was investigated in the case of Dutch realist painter Johannes Vermeer and his use of the camera obscura. In Experiment 1, participants evaluated 20 Vermeer paintings on 6 aesthetic dimensions and preferred paintings created with the…

  17. Techno-economic evaluation of broadband access technologies

    DEFF Research Database (Denmark)

    Sigurdsson, Halldór Matthias; Skouby, Knud Erik

    2005-01-01

    Broadband for all is an essential element in the EU policy concerning the future of ICT-based society. The overall purpose of this paper is to present a model for evaluation of different broadband access technologies and to present some preliminary results based on the model that has been carried...

  18. Application of the Study Model of \\\\\\"Knowledge Management Infrastructure in Organizations\\\\\\" in Information Centers: The case of the Regional Information Center for Science and Technology (RICeST

    Directory of Open Access Journals (Sweden)

    Abdolhossein Farajpahlou

    2012-02-01

    Full Text Available Information centers are duly obliged to move in line with their parent organizations’ goals and missions in creating knowledge. In the age of information and communication revolution, and in a knowledge-based economy, organizations that are involved in creation of knowledge have an important role in communication and diffusion of knowledge. In the mean time, libraries and information centers change from being mere depository sources to knowledge institutions. The current research aimed to study the present state of knowledge management infrastructures of the Regional Information Center for Science and Technology (RICeST as a national and regional information center. The statistic population of this study was consisted of 87 staff. Data was collected by means of questionnaires, observation and interviews. The results showed the required infrastructure for KM activities were almost there, among different aspects of which, budgeting had a better situation in the institution under study. In regards with establishment of knowledge management, RICeST was paying more attention to information and communication technology and knowledge network via applications such as the Internet and extranets. Another fact was that in the RICeST, emphasis was on learning and on human resources as the substantial sources in creation of knowledge. Among other aspects, “organizational culture” was in a lower state compared with other aspects in the RICeST.

  19. Evaluating trauma center structural performance: The experience of a Canadian provincial trauma system

    Directory of Open Access Journals (Sweden)

    Lynne Moore

    2013-01-01

    Full Text Available Background: Indicators of structure, process, and outcome are required to evaluate the performance of trauma centers to improve the quality and efficiency of care. While periodic external accreditation visits are part of most trauma systems, a quantitative indicator of structural performance has yet to be proposed. The objective of this study was to develop and validate a trauma center structural performance indicator using accreditation report data. Materials and Methods: Analyses were based on accreditation reports completed during on-site visits in the Quebec trauma system (1994-2005. Qualitative report data was retrospectively transposed onto an evaluation grid and the weighted average of grid items was used to quantify performance. The indicator of structural performance was evaluated in terms of test-retest reliability (kappa statistic, discrimination between centers (coefficient of variation, content validity (correlation with accreditation decision, designation level, and patient volume and forecasting (correlation between visits performed in 1994-1999 and 1998-2005. Results: Kappa statistics were >0.8 for 66 of the 73 (90% grid items. Mean structural performance score over 59 trauma centers was 47.4 (95% CI: 43.6-51.1. Two centers were flagged as outliers and the coefficient of variation was 31.2% (95% CI: 25.5% to 37.6%, showing good discrimination. Correlation coefficients of associations with accreditation decision, designation level, and volume were all statistically significant (r = 0.61, -0.40, and 0.24, respectively. No correlation was observed over time (r = 0.03. Conclusion: This study demonstrates the feasibility of quantifying trauma center structural performance using accreditation reports. The proposed performance indicator shows good test-retest reliability, between-center discrimination, and construct validity. The observed variability in structural performance across centers and over-time underlines the importance of

  20. EVALUATION PROGRAM OF REGIONAL TRAINING CENTER (PELATDA) PON XIX SOUTH SULAWESI

    OpenAIRE

    Sahabuddin, Sahabuddin

    2017-01-01

    AbstractThe objective of this research is to evaluate Program Regional Training Center (PELATDA) PON XIX South Sulawesi. This is a qualitative and quantitative research with evaluation approach using Context, Input, Process, and Product (CIPP) model. Methods of collecting data in triangulation using questionnaires, interviews, document studies and observation. The result shows that: (1) Context Evaluation: having strong government policies, objectives and targets are well manifested, with an ...

  1. 75 FR 69631 - National Medal of Technology and Innovation Nomination Evaluation Committee Meeting

    Science.gov (United States)

    2010-11-15

    ...] National Medal of Technology and Innovation Nomination Evaluation Committee Meeting AGENCY: United States... Technology and Innovation (NMTI) Nomination Evaluation Committee will meet in closed session on Tuesday..., Program Manager, National Medal of Technology and Innovation Program, United States Patent and...

  2. 76 FR 68167 - National Medal of Technology and Innovation Nomination Evaluation Committee Meeting

    Science.gov (United States)

    2011-11-03

    ...-2011-0069] National Medal of Technology and Innovation Nomination Evaluation Committee Meeting AGENCY... of Technology and Innovation (NMTI) Nomination Evaluation Committee will meet in closed session on.... FOR FURTHER INFORMATION CONTACT: Vikrum Aiyer, Program Manager, National Medal of Technology...

  3. Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

    2006-09-01

    The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

  4. Evaluating trauma center process performance in an integrated trauma system with registry data

    Directory of Open Access Journals (Sweden)

    Lynne Moore

    2013-01-01

    Full Text Available Background: The evaluation of trauma center performance implies the use of indicators that evaluate clinical processes. Despite the availability of routinely collected clinical data in most trauma systems, quality improvement efforts are often limited to hospital-based audit of adverse patient outcomes. Objective: To identify and evaluate a series of process performance indicators (PPI that can be calculated using routinely collected trauma registry data. Materials and Methods: PPI were identified using a review of published literature, trauma system documentation, and expert consensus. Data from the 59 trauma centers of the Quebec trauma system (1999, 2006; N = 99,444 were used to calculate estimates of conformity to each PPI for each trauma center. Outliers were identified by comparing each center to the global mean. PPI were evaluated in terms of discrimination (between-center variance, construct validity (correlation with designation level and patient volume, and forecasting (correlation over time. Results: Fifteen PPI were retained. Global proportions of conformity ranged between 6% for reduction of a major dislocation within 1 h and 97% for therapeutic laparotomy. Between-center variance was statistically significant for 13 PPI. Five PPI were significantly associated with designation level, 7 were associated with volume, and 11 were correlated over time. Conclusion: In our trauma system, results suggest that a series of 15 PPI supported by literature review or expert opinion can be calculated using routinely collected trauma registry data. We have provided evidence of their discrimination, construct validity, and forecasting properties. The between-center variance observed in this study highlights the importance of evaluating process performance in integrated trauma systems.

  5. Evaluation of urban underground space resources using digitalization technologies

    Directory of Open Access Journals (Sweden)

    Hehua Zhu

    2016-12-01

    Full Text Available Exploitation and utilization of urban underground space resources is gaining increasing attention in cities’ sustainable development. Due to the attributes of fragility and irreversibility, urban underground space resources can be extremely vulnerable to damage and it is often difficult in restoring their original state once damaged. Therefore, scientific and reasonable evaluation of urban underground space resources is of vital importance in urban planning and development. This paper first describes the content and methods for the evaluation of urban underground space resources, and introduces the digitalization technologies to handle the problems of strong subjectivity, low efficiency and rough precision encountered when using traditional evaluation tools. Then, the related concepts and main technologies for digitalization were demonstrated and an intelligent GIS-based engineering geology system was built. Based on the drilling information in Changzhou City, stratum standardization and 3D modeling of strata, underground structures and pipelines were conducted in the built intelligent system. Finally, with the help of spatial overlay analysis in the GIS-based platform and a combination of other digitalization technologies, the urban underground space resources of Changzhou City were evaluated. Maps of geological suitability were produced, which provide scientific guidance and reference for the exploitation and planning of urban underground space resources in Changzhou City. In addition, site selection for key projects was conducted based on the evaluation results using this platform.

  6. Cyber security evaluation of II&C technologies

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Laboratory (INL), Idaho Falls, ID (United States)

    2014-11-01

    The Light Water Reactor Sustainability (LWRS) Program is a research and development program sponsored by the Department of Energy, which is conducted in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Within the LWRS Program, the Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. The II&C Pathway is conducted by Idaho National Laboratory (INL). Cyber security is a common concern among nuclear utilities and other nuclear industry stakeholders regarding the digital technologies that are being developed under this program. This concern extends to the point of calling into question whether these types of technologies could ever be deployed in nuclear plants given the possibility that the information in them can be compromised and the technologies themselves can potentially be exploited to serve as attack vectors for adversaries. To this end, a cyber security evaluation has been conducted of these technologies to determine whether they constitute a threat beyond what the nuclear plants already manage within their regulatory-required cyber security programs. Specifically, the evaluation is based on NEI 08-09, which is the industry’s template for cyber security programs and evaluations, accepted by the Nuclear Regulatory Commission (NRC) as responsive to the requirements of the nuclear power plant cyber security regulation found in 10 CFR 73.54. The evaluation was conducted by a

  7. Cyber Security Evaluation of II&C Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ken Thomas

    2014-11-01

    The Light Water Reactor Sustainability (LWRS) Program is a research and development program sponsored by the Department of Energy, which is conducted in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Within the LWRS Program, the Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. The II&C Pathway is conducted by Idaho National Laboratory (INL). Cyber security is a common concern among nuclear utilities and other nuclear industry stakeholders regarding the digital technologies that are being developed under this program. This concern extends to the point of calling into question whether these types of technologies could ever be deployed in nuclear plants given the possibility that the information in them can be compromised and the technologies themselves can potentially be exploited to serve as attack vectors for adversaries. To this end, a cyber security evaluation has been conducted of these technologies to determine whether they constitute a threat beyond what the nuclear plants already manage within their regulatory-required cyber security programs. Specifically, the evaluation is based on NEI 08-09, which is the industry’s template for cyber security programs and evaluations, accepted by the Nuclear Regulatory Commission (NRC) as responsive to the requirements of the nuclear power plant cyber security regulation found in 10 CFR 73.54. The evaluation was conducted by a

  8. Oil Bypass Filter Technology Performance Evaluation - January 2003 Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Laurence R. Zirker; James E. Francfort

    2003-01-01

    This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

  9. Oil Bypass Filter Technology Performance Evaluation - First Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Zirker, L.R.; Francfort, J.E.

    2003-01-31

    This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

  10. Logistics Distribution Center Location Evaluation Based on Genetic Algorithm and Fuzzy Neural Network

    Science.gov (United States)

    Shao, Yuxiang; Chen, Qing; Wei, Zhenhua

    Logistics distribution center location evaluation is a dynamic, fuzzy, open and complicated nonlinear system, which makes it difficult to evaluate the distribution center location by the traditional analysis method. The paper proposes a distribution center location evaluation system which uses the fuzzy neural network combined with the genetic algorithm. In this model, the neural network is adopted to construct the fuzzy system. By using the genetic algorithm, the parameters of the neural network are optimized and trained so as to improve the fuzzy system’s abilities of self-study and self-adaptation. At last, the sampled data are trained and tested by Matlab software. The simulation results indicate that the proposed identification model has very small errors.

  11. Evaluation of technological measures to cope with climate change

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Hiroshi; Moriguchi, Yulchi [National Inst. for Environmental Studies, Onogawa Tsukuba (Japan)

    1993-12-31

    Because the global warming (climate change) is recognized as a highly probable phenomenon in the next century, the countermeasures to cope with this issue is really Important. International discussion Is progressing towards the conclusion of the treaty to stabilize global warming. Therefore, now is the time to take concrete action to reduce the emission to the greenhouse gases (GHG). To find the way to reduce the emission of the GHG, the procedure as next should be taken. (1) Systematic estimation of GHG emission (GHG analysis), (2) Identification of conventional and Innovative technologies, (3) Assessment of individual sectoral technologies, (4) Comprehensive evaluation of countermeasures as a whole. Both in the U.S.A. and Japan, this kind of research have been made independently. Among these processes, the standard methodologies should be established on the GHG analysis, the assessment of individual technologies and the comprehensive evaluation. From such a background, it is important to discuss the way to evaluate technological measures to cope with climate change between the specialist from the U.S.A. and Japan. And still required to search the possibility to establish a joint project between both countries.

  12. Evaluation of Brine Processing Technologies for Spacecraft Wastewater

    Science.gov (United States)

    Shaw, Hali L.; Flynn, Michael; Wisniewski, Richard; Lee, Jeffery; Jones, Harry; Delzeit, Lance; Shull, Sarah; Sargusingh, Miriam; Beeler, David; Howard, Jeanie; Howard, Kevin; Harris, Linden; Parodi, Jurek; Kawashima, Brian

    2015-01-01

    Brine drying systems may be used in spaceflight. There are several advantages to using brine processing technologies for long-duration human missions including a reduction in resupply requirements and achieving high water recovery ratios. The objective of this project was to evaluate four technologies for the drying of spacecraft water recycling system brine byproducts. The technologies tested were NASA's Forward Osmosis Brine Drying (FOBD), Paragon's Ionomer Water Processor (IWP), NASA's Brine Evaporation Bag (BEB) System, and UMPQUA's Ultrasonic Brine Dewatering System (UBDS). The purpose of this work was to evaluate the hardware using feed streams composed of brines similar to those generated on board the International Space Station (ISS) and future exploration missions. The brine formulations used for testing were the ISS Alternate Pretreatment and Solution 2 (Alt Pretreat). The brines were generated using the Wiped-film Rotating-disk (WFRD) evaporator, which is a vapor compression distillation system that is used to simulate the function of the ISS Urine Processor Assembly (UPA). Each system was evaluated based on the results from testing and Equivalent System Mass (ESM) calculations. A Quality Function Deployment (QFD) matrix was also developed as a method to compare the different technologies based on customer and engineering requirements.

  13. Accuracy of patient's turnover time prediction using RFID technology in an academic ambulatory surgery center.

    Science.gov (United States)

    Marchand-Maillet, Florence; Debes, Claire; Garnier, Fanny; Dufeu, Nicolas; Sciard, Didier; Beaussier, Marc

    2015-02-01

    Patients flow in outpatient surgical unit is a major issue with regards to resource utilization, overall case load and patient satisfaction. An electronic Radio Frequency Identification Device (RFID) was used to document the overall time spent by the patients between their admission and discharge from the unit. The objective of this study was to evaluate how a RFID-based data collection system could provide an accurate prediction of the actual time for the patient to be discharged from the ambulatory surgical unit after surgery. This is an observational prospective evaluation carried out in an academic ambulatory surgery center (ASC). Data on length of stay at each step of the patient care, from admission to discharge, were recorded by a RFID device and analyzed according to the type of surgical procedure, the surgeon and the anesthetic technique. Based on these initial data (n = 1520), patients were scheduled in a sequential manner according to the expected duration of the previous case. The primary endpoint was the difference between actual and predicted time of discharge from the unit. A total of 414 consecutive patients were prospectively evaluated. One hundred seventy four patients (42%) were discharged at the predicted time ± 30 min. Only 24% were discharged behind predicted schedule. Using an automatic record of patient's length of stay would allow an accurate prediction of the discharge time according to the type of surgery, the surgeon and the anesthetic procedure.

  14. Review and evaluation of the Office of Science and Technology`s Community Leaders Network

    Energy Technology Data Exchange (ETDEWEB)

    Carnes, S.A.; Schweitzer, M.; Peelle, E.R.

    1997-08-01

    This report constitutes a review and evaluation of the Community Leaders Network (CLN), an informally structured national stakeholder group sponsored by the Department of Energy (DOE) Environmental Management (EM) Program`s Office of Science and Technology (OST) to obtain citizen input into the technology research and development programs of the OST. Since the CLN`s inception in 1993, its participants, currently numbering about 35 members mostly from jurisdictions hosting DOE waste management and environmental remediation sites, and its clients (i.e., OST) have invested substantial resources to develop the capability to enhance technology development and deployment activities through proactive stakeholder involvement. The specific objectives of the CLN are to: provide feedback and input to OST on technology development activities; provide information on OST ideas and approaches to key stakeholder groups, and provide input to OST on stakeholder concerns and involvement.

  15. Carbon black dispersion pre-plating technology for printed wire board manufacturing. Final technology evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    Folsom, D.W.; Gavaskar, A.R.; Jones, J.A.; Olfenbuttel, R.F.

    1993-10-01

    The project compared chemical use, waste generation, cost, and product quality between electroless copper and carbon-black-based preplating technologies at the printed wire board (PWB) manufacturing facility of McCurdy Circuits in Orange, CA. The carbon-black based preplating technology evaluated is used as an alternative process for electroless copper (EC) plating of through-holes before electrolytic copper plating. The specific process used at McCurdy is the BlackHole (BH) technology process, which uses a dispersion of carbon black in an aqueous solution to provide a conductive surface for subsequent electrolytic copper plating. The carbon-black dispersion technology provided effective waste reduction and long-term cost savings. The economic analysis determined that the new process was cost efficient because chemical use was reduced and the process proved more efficient; the payback period was less than 4 yrs.

  16. INNOVATIVE TECHNOLOGY EVALUATION REPORT, SEDIMENT SAMPLING TECHNOLOGY, AQUATIC RESEARCH INSTRUMENTS, RUSSIAN PEAT BORER

    Science.gov (United States)

    The Russian Peat Borer designed and fabricated by Aquatic Research Instruments was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation Program in April and May 1999 at sites in EPA Regions 1 and 5, respectively. In additio...

  17. Evaluating E-Learning Accessibility by Automated and Student-Centered Methods

    Science.gov (United States)

    Kumar, Kari L.; Owston, Ron

    2016-01-01

    The use of learning technologies is becoming ubiquitous in higher education. As a result, there is a pressing need to develop methods to evaluate their accessibility to ensure that students do not encounter barriers to accessibility while engaging in e-learning. In this study, sample online units were evaluated for accessibility by automated tools…

  18. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Center

    Science.gov (United States)

    Gold, C. H.; Moore, A. M.; Dodd, B.; Marshall, R.; West, S. G.

    1978-01-01

    Performance information for the center is reported. The search production during the reporting period exceeds the production record of the center during any period in its 14 year history. A performance average of 30 searches per month, which represents an increase of 45%, is reported. Numerical listings of the searches processed are given. A section of transfer and impact report is included.

  19. Evaluation of a federally funded workforce development program: the Centers for Public Health Preparedness.

    Science.gov (United States)

    Sobelson, Robyn K; Young, Andrea C

    2013-04-01

    The Centers for Public Health Preparedness (CPHP) program was a five-year cooperative agreement funded by the Centers for Disease Control and Prevention (CDC). The program was initiated in 2004 to strengthen terrorism and emergency preparedness by linking academic expertise to state and local health agency needs. The purposes of the evaluation study were to identify the results achieved by the Centers and inform program planning for future programs. The evaluation was summative and retrospective in its design and focused on the aggregate outcomes of the CPHP program. The evaluation results indicated progress was achieved on program goals related to development of new training products, training members of the public health workforce, and expansion of partnerships between accredited schools of public health and state and local public health departments. Evaluation results, as well as methodological insights gleaned during the planning and conduct of the CPHP evaluation, were used to inform the design of the next iteration of the CPHP Program, the Preparedness and Emergency Response Learning Centers (PERLC).

  20. Research on auto-centering device in surface defects evaluation system of large spherical optics

    Science.gov (United States)

    Zhang, Yihui; Yang, Yongying; Wu, Fan; Chai, Huiting; Yan, Kai; Zhou, Lin; Li, Yang; Liu, Dong; Bai, Jian; Shen, Yibing; Cao, Pin

    2016-09-01

    For the Spherical Surface Defects Evaluation System (SSDES), lens centering is essential to obtain the precise scanning trace and defect features without mismatch. Based on a combination of auto-collimating microscopy and Computer-Aided Alignment (CAA), an auto-centering system that can measure the deviation of large spherical center with respect to a reference rotation axis rapidly and accurately is established in this paper. The auto-centering system allows the closedloop feedback control of spherical center according to the different images of the crosshair reticle on CCD. Image entropy algorithm is employed to evaluate image clarity determined by the auto-focus experiment of 50μm step-length. Subsequently, an improved algorithm that can search the crosshair center automatically is proposed to make the trajectory of crosshair images and the position of rotation axis more reliable based on original circle fitting algorithm by the least square method (LSM). The comparison results indicates to show the high accuracy and efficiency of the proposed fitting method with LSM.

  1. 78 FR 20924 - Center for Biologics Evaluation and Research eSubmitter Pilot Evaluation Program for...

    Science.gov (United States)

    2013-04-08

    ... Pilot Evaluation Program for Investigational New Drug Applications AGENCY: Food and Drug Administration...) applications to participate in a pilot evaluation program for CBER's eSubmitter Program (eSubmitter). CBER's e... FDA. II. eSubmitter Pilot Evaluation Program Expectations The eSubmitter pilot evaluation program...

  2. C-130 Advanced Technology Center wing box conceptual design/cost study

    Science.gov (United States)

    Whitehead, R. S.; Foreman, C. R.; Silva, K.

    1992-01-01

    A conceptual design was developed by Northrop/LTV for an advanced C-130 Center Wing Box (CWB) which could meet the severe mission requirements of the SOF C-130 aircraft. The goals for the advanced technology CWB relative to the current C-130H CWB were: (1) the same acquisition cost; (2) lower operating support costs; (3) equal or lower weight; (4) a 30,000 hour service life for the SOF mission; and (5) minimum impact on the current maintenance concept. Initially, the structural arrangement, weight, external and internal loads, fatigue spectrum, flutter envelope and design criteria for the SOF C-130 aircraft CWB were developed. An advanced materials assessment was then conducted to determine the suitability of advanced materials for a 1994 production availability and detailed trade studies were performed on candidate CWB conceptual designs. Finally, a life-cycle cost analysis was performed on the advanced CWB. The study results showed that a hybrid composite/metallic CWB could meet the severe SOF design requirements, reduce the CWB weight by 14 pct., and was cost effective relative to an all metal beefed up C-130H CWB.

  3. Environmental Survey preliminary report, Morgantown Energy Technology Center, Morgantown, West Virginia

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Morgantown Energy Technology Center (METC) conducted November 30 through December 4, 1987. In addition, the preliminary findings of the Laramie Project Office (LPO) Survey, which was conducted as part of the METC Survey on January 25 through 29, 1988, are presented in Appendices E and F. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with METC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at METC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities at METC. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the results will be incorporated into the METC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey METC. 60 refs., 28 figs., 43 tabs.

  4. The Chicago Center for Green Technology: life-cycle assessment of a brownfield redevelopment project

    Science.gov (United States)

    Brecheisen, Thomas; Theis, Thomas

    2013-03-01

    The sustainable development of brownfields reflects a fundamental, yet logical, shift in thinking and policymaking regarding pollution prevention. Life-cycle assessment (LCA) is a tool that can be used to assist in determining the conformity of brownfield development projects to the sustainability paradigm. LCA was applied to the process of a real brownfield redevelopment project, now known as the Chicago Center for Green Technology, to determine the cumulative energy required to complete the following redevelopment stages: (1) brownfield assessment and remediation, (2) building rehabilitation and site development and (3) ten years of operation. The results of the LCA have shown that operational energy is the dominant life-cycle stage after ten years of operation. The preservation and rehabilitation of the existing building, the installation of renewable energy systems (geothermal and photovoltaic) on-site and the use of more sustainable building products resulted in 72 terajoules (TJ) of avoided energy impacts, which would provide 14 years of operational energy for the site. Methodological note: data for this life-cycle assessment were obtained from project reports, construction blueprints and utility bills.

  5. Calcined Waste Storage at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    Staiger, M. Daniel, Swenson, Michael C.

    2011-09-01

    This comprehensive report provides definitive volume, mass, and composition (chemical and radioactivity) of calcined waste stored at the Idaho Nuclear Technology and Engineering Center. Calcine composition data are required for regulatory compliance (such as permitting and waste disposal), future treatment of the caline, and shipping the calcine to an off-Site-facility (such as a geologic repository). This report also contains a description of the calcine storage bins. The Calcined Solids Storage Facilities (CSSFs) were designed by different architectural engineering firms and built at different times. Each CSSF has a unique design, reflecting varying design criteria and lessons learned from historical CSSF operation. The varying CSSF design will affect future calcine retrieval processes and equipment. Revision 4 of this report presents refinements and enhancements of calculations concerning the composition, volume, mass, chemical content, and radioactivity of calcined waste produced and stored within the CSSFs. The historical calcine samples are insufficient in number and scope of analysis to fully characterize the entire inventory of calcine in the CSSFs. Sample data exist for all the liquid wastes that were calcined. This report provides calcine composition data based on liquid waste sample analyses, volume of liquid waste calcined, calciner operating data, and CSSF operating data using several large Microsoft Excel (Microsoft 2003) databases and spreadsheets that are collectively called the Historical Processing Model. The calcine composition determined by this method compares favorably with historical calcine sample data.

  6. The OCHIN community information network: bringing together community health centers, information technology, and data to support a patient-centered medical village.

    Science.gov (United States)

    Devoe, Jennifer E; Sears, Abigail

    2013-01-01

    Creating integrated, comprehensive care practices requires access to data and informatics expertise. Information technology (IT) resources are not readily available to individual practices. One model of shared IT resources and learning is a "patient-centered medical village." We describe the OCHIN Community Health Information Network as an example of this model; community practices have come together collectively to form an organization that leverages shared IT expertise, resources, and data, providing members with the means to fully capitalize on new technologies that support improved care. This collaborative facilitates the identification of "problem sheds" through surveillance of network-wide data, enables shared learning regarding best practices, and provides a "community laboratory" for practice-based research. As an example of a community of solution, OCHIN uses health IT and data-sharing innovations to enhance partnerships between public health leaders, clinicians in community health centers, informatics experts, and policy makers. OCHIN community partners benefit from the shared IT resource (eg, a linked electronic health record, centralized data warehouse, informatics, and improvement expertise). This patient-centered medical village provides (1) the collective mechanism to build community-tailored IT solutions, (2) "neighbors" to share data and improvement strategies, and (3) infrastructure to support innovations based on electronic health records across communities, using experimental approaches.

  7. An Integrated Modeling Approach to Evaluate and Optimize Data Center Sustainability, Dependability and Cost

    Directory of Open Access Journals (Sweden)

    Gustavo Callou

    2014-01-01

    Full Text Available Data centers have evolved dramatically in recent years, due to the advent of social networking services, e-commerce and cloud computing. The conflicting requirements are the high availability levels demanded against the low sustainability impact and cost values. The approaches that evaluate and optimize these requirements are essential to support designers of data center architectures. Our work aims to propose an integrated approach to estimate and optimize these issues with the support of the developed environment, Mercury. Mercury is a tool for dependability, performance and energy flow evaluation. The tool supports reliability block diagrams (RBD, stochastic Petri nets (SPNs, continuous-time Markov chains (CTMC and energy flow (EFM models. The EFM verifies the energy flow on data center architectures, taking into account the energy efficiency and power capacity that each device can provide (assuming power systems or extract (considering cooling components. The EFM also estimates the sustainability impact and cost issues of data center architectures. Additionally, a methodology is also considered to support the modeling, evaluation and optimization processes. Two case studies are presented to illustrate the adopted methodology on data center power systems.

  8. Preparing Pre-Service Teachers to Integrate Technology into K-12 Instruction: Evaluation of a Technology-Infused Approach

    Science.gov (United States)

    Admiraal, Wilfried; van Vugt, Felix; Kranenburg, Frans; Koster, Bob; Smit, Ben; Weijers, Sanne; Lockhorst, Ditte

    2017-01-01

    The quality of how technology is addressed in teacher education programmes is conditional for how student teachers apply technology in secondary schools after their graduation. Two technology-infused courses of one teacher education programme were evaluated. In line with studies on the development of pre-service teachers' technological,…

  9. Designing and Evaluating Usable Technology in Industrial Research Three Case Studies

    CERN Document Server

    Karat, Clare-Marie

    2010-01-01

    This book is about HCI research in an industrial research setting. It is based on the experiences of two researchers at the IBM T. J. Watson Research Center. Over the last two decades, Drs. John and Clare-Marie Karat have conducted HCI research to create innovative usable technology for users across a variety of domains. We begin the book by introducing the reader to the context of industrial research as well as a set of common themes or guidelines to consider in conducting HCI research in practice. Then case study examples of HCI approaches to the design and evaluation of usable solutions for

  10. SAW filter manufacture and piezoelectric materials evaluation based on printed electronics technology

    Science.gov (United States)

    Liu, Xiao-chen; Li, Kun; Xuan, Xiu-wei; Cao, Yang; Teng, Jian-fu

    2014-09-01

    In this paper, the silver nanoparticle ink and ink-jet printing technology are used to manufacture the surface acoustic wave (SAW) filters. The characteristics of three common substrate piezoelectric materials of ST-quartz, Y36°-LiTaO3 and Y128°-LiNbO3 are evaluated. The experimental results show that Y128°-LiNbO3 matches the ink much better than others. The printed SAW filter with Y128°-LiNbO3 as piezoelectric substrate is realized, and its center frequency and bandwidth are 18.4 MHz and 500 kHz, respectively.

  11. SURFACTANT-ENHANCED EXTRACTION TECHNOLOGY EVALUATION VERSUCHSEININCHTUNG ZUR GRUNDWASSER-UND ALTLASTENSANIERUNG (VEGAS) FACILITY, STUTTGART, GERMANY

    Science.gov (United States)

    This innovative technology evaluation report (ITER) summarized the results of an evaluation of a surfactant-enhanced extraction technology. This evaluation was conducted under a bilateral agreement between the United States (U.S.) Environmental Protection Agency (EPA) Superfund ...

  12. Mobile STEMship Discovery Center: K-12 Aerospace-Based Science, Technology, Engineering, and Mathematics (STEM) Mobile Teaching Vehicle

    Science.gov (United States)

    2015-08-03

    AND SUBTITLE Mobile STEMship Discovery Center: K-12 Aerospace-Based Science, Technology, Engineering, and Mathematics (STEM) Mobile Teaching Vehicle...college. Three students have gone through the NRL internships and now are full time employees at NRL. This pattern of direct corporate, government and

  13. Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

    Science.gov (United States)

    Diorio, Kimberly A.

    2002-01-01

    A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

  14. Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

    Science.gov (United States)

    Diorio, Kimberly A.

    2002-01-01

    A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

  15. Technical evaluation: pressurized fluidized-bed combustion technology

    Energy Technology Data Exchange (ETDEWEB)

    Miller, S A; Vogel, G J; Gehl, S M; Hanway, Jr, J E; Henry, R F; Parker, K M; Smyk, E B; Swift, W M; Podolski, W F

    1982-04-01

    The technology of pressurized fluidized-bed combustion, particularly in its application to a coal-burning combined-cycle plant, is evaluated by examining the technical status of advanced-concept plant components - boiler system (combustor, air-handling and air-injection equipment, and heat exchangers); solids handling, injection, and ejection system; hot-gas cleanup equipment; instrumentation/control system; and the gas turbine - along with materials of plant construction. Environmental performance as well as energy efficiency are examined, and economic considerations are reviewed briefly. The evaluation concludes with a broad survey of the principal related research and development programs in the United States and other countries, a foreview of the most likely technological developments, and a summary of unresolved technical issues and problems.

  16. Science on Drupal: An evaluation of CMS Technologies

    Science.gov (United States)

    Vinay, S.; Gonzalez, A.; Pinto, A.; Pascuzzi, F.; Gerard, A.

    2011-12-01

    We conducted an extensive evaluation of various Content Management System (CMS) technologies for implementing different websites supporting interdisciplinary science data and information. We chose two products, Drupal and Bluenog/Hippo CMS, to meet our specific needs and requirements. Drupal is an open source product that is quick and easy to setup and use. It is a very mature, stable, and widely used product. It has rich functionality supported by a large and active user base and developer community. There are many plugins available that provide additional features for managing citations, map gallery, semantic search, digital repositories (fedora), scientific workflows, collaborative authoring, social networking, and other functions. All of these work very well within the Drupal framework if minimal customization is needed. We have successfully implemented Drupal for multiple projects such as: 1) the Haiti Regeneration Initiative (http://haitiregeneration.org/); 2) the Consortium on Climate Risk in the Urban Northeast (http://beta.ccrun.org/); and 3) the Africa Soils Information Service (http://africasoils.net/). We are also developing two other websites, the Côte Sud Initiative (CSI) and Emerging Infectious Diseases, using Drupal. We are testing the Drupal multi-site install for managing different websites with one install to streamline the maintenance. In addition, paid support and consultancy for Drupal website development are available at affordable prices. All of these features make Drupal very attractive for implementing state-of-the-art scientific websites that do not have complex requirements. One of our major websites, the NASA Socioeconomic Data and Applications Center (SEDAC), has a very complex set of requirements. It has to easily re-purpose content across multiple web pages and sites with different presentations. It has to serve the content via REST or similar standard interfaces so that external client applications can access content in the CMS

  17. Evaluation of the organizational cultural competence of a community health center: a multimethod approach.

    Science.gov (United States)

    Cherner, Rebecca; Olavarria, Marcela; Young, Marta; Aubry, Tim; Marchant, Christina

    2014-09-01

    Cultural competence is an important component of client-centered care in health promotion and community health services, especially considering the changing demographics of North America. Although a number of tools for evaluating cultural competence have been developed, few studies have reported on the results of organizational cultural competence evaluations in health care or social services settings. This article aims to fill this gap by providing a description of a cultural competence evaluation of a community health center serving a diverse population. Data collection included reviewing documents, and surveying staff, management, and the Board of Directors. The organization fully met 28 of 53 standards of cultural competence, partially met 21 standards, and did not meet 2 standards, and 2 standards could not be assessed due to missing information. The advantages and lessons learned from this organizational cultural competence evaluation are discussed. © 2014 Society for Public Health Education.

  18. Arctic Technology Evaluation 2014 Oil-in-Ice Demonstration Report

    Science.gov (United States)

    2015-03-01

    USCGC Healy and evaluated their performance in the cold weather environment as part of Arctic Shield. Based on lessons learned in 2013, the RDC...servicing. Additional bottles were provided for cold weather . Figure 3. Aerostat and LRS (left) and aerostat deployed (right). Arctic Technology...long durations through all weather conditions; and communicate real-time data from the surface of the ocean. The model used in Arctic Shield 2014 was

  19. Evaluating HDR photos using Web 2.0 technology

    Science.gov (United States)

    Qiu, Guoping; Mei, Yujie; Duan, Jiang

    2011-01-01

    High dynamic range (HDR) photography is an emerging technology that has the potential to dramatically enhance the visual quality and realism of digital photos. One of the key technical challenges of HDR photography is displaying HDR photos on conventional devices through tone mapping or dynamic range compression. Although many different tone mapping techniques have been developed in recent years, evaluating tone mapping operators prove to be extremely difficult. Web2.0, social media and crowd-sourcing are emerging Internet technologies which can be harnessed to harvest the brain power of the mass to solve difficult problems in science, engineering and businesses. Paired comparison is used in the scientific study of preferences and attitudes and has been shown to be capable of obtaining an interval-scale ordering of items along a psychometric dimension such as preference or importance. In this paper, we exploit these technologies for evaluating HDR tone mapping algorithms. We have developed a Web2.0 style system that enables Internet users from anywhere to evaluate tone mapped HDR photos at any time. We adopt a simple paired comparison protocol, Internet users are presented a pair of tone mapped images and are simply asked to select the one that they think is better or click a "no difference" button. These user inputs are collected in the web server and analyzed by a rank aggregation algorithm which ranks the tone mapped photos according to the votes they received. We present experimental results which demonstrate that the emerging Internet technologies can be exploited as a new paradigm for evaluating HDR tone mapping algorithms. The advantages of this approach include the potential of collecting large user inputs under a variety of viewing environments rather than limited user participation under controlled laboratory environments thus enabling more robust and reliable quality assessment. We also present data analysis to correlate user generated qualitative

  20. EVALUATION OF ADAPTATIVE RESOURCES OF CHILDREN WITH MODERN AUTOMATED TECHNOLOGY

    OpenAIRE

    V.N. Luchaninova; L.V. Trankovskaya; E.A. Kosnitskaya

    2008-01-01

    Adaptative resources of children's organisms at the time of their entrance to school were evaluated with modern automated technology — the method of computer dermographia (KD). Significant risk factors of negative course of adaptative process were determined. High self descriptiveness of KD for integral estimation of state of health at the time of adaptation of children to the school conditions was demonstrated. The scheme of prophylactic measures was developed for the purpose of improvement ...