WorldWideScience

Sample records for technology evaluation bulletin

  1. Superfund Innovative Technology Evaluation: Demonstration Bulletin: Organic Extraction Utilizing Solvents

    Science.gov (United States)

    This technology utilizes liquified gases as the extracting solvent to remove organics, such as hydrocarbons, oil and grease, from wastewater or contaminated sludges and soils. Carbon dioxide is generally used for aqueous solutions, and propane is used for sediment, sludges and ...

  2. Technology applications bulletins

    International Nuclear Information System (INIS)

    Koncinski, W. Jr.

    1989-02-01

    Martin Marietta Energy Systems, Inc. (Energy Systems), operates five facilities for the US Department of Energy (DOE): the Oak Ridge National Laboratory (ORNL), which is a large, multidisciplinary research and development (R and D) center whose primary mission is energy research; the Oak Ridge Y-12 Plant, which engages in defense research, development, and production; and the uranium-enrichment plants at Oak Ridge; Paducah, Kentucky; and Portsmouth, Ohio. Much of the research carried out at these facilities is of interest to industry and to state or local governments. To make information about this research available, the Energy Systems Office of Technology Applications publishes brief descriptions of selected technologies and reports. These technology applications bulletins describe the new technology and inform the reader about how to obtain further information, gain access to technical resources, and initiate direct contact with Energy Systems researchers

  3. Technology applications bulletins: Number one

    Energy Technology Data Exchange (ETDEWEB)

    Koncinski, W. Jr. (ed.)

    1989-02-01

    Martin Marietta Energy Systems, Inc. (Energy Systems), operates five facilities for the US Department of Energy (DOE): the Oak Ridge National Laboratory (ORNL), which is a large, multidisciplinary research and development (R and D) center whose primary mission is energy research; the Oak Ridge Y-12 Plant, which engages in defense research, development, and production; and the uranium-enrichment plants at Oak Ridge; Paducah, Kentucky; and Portsmouth, Ohio. Much of the research carried out at these facilities is of interest to industry and to state or local governments. To make information about this research available, the Energy Systems Office of Technology Applications publishes brief descriptions of selected technologies and reports. These technology applications bulletins describe the new technology and inform the reader about how to obtain further information, gain access to technical resources, and initiate direct contact with Energy Systems researchers.

  4. Superfund Innovative Technology Evaluation - Demonstration Bulletin: In-Situ Soil Stabilization

    Science.gov (United States)

    In-situ stabilization technology immobilizes organics and inorganic compounds in wet or dry soils by using reagents (additives) to polymerize with the soils and sludges producing a cement-like mass. Two basic components of this technology are the Geo-Con/DSM Deep Soil Mixing Sy...

  5. Manufacturing technology: A Sandia Technology Bulletin, Volume 1, No. 1

    Energy Technology Data Exchange (ETDEWEB)

    Maydew, R.C.; Leonard, J.A.; Hey, N.S. (eds.)

    1990-08-01

    Welcome to this first issue of Manufacturing Technology, one of three new technology bulletins published at Sandia National Laboratories in which we seek to share information with US industry about applications of technology. Inside this issue: industry/DOE/Sandia agreement to strengthen specialty metals competitiveness; silicon micromachining produces microscopic parts; Sandia develops state-of-the-art capacitor winding machine; new robotic system spells finis to manual edge finishing; and milling assistant speeds numerically controlled machine programming.

  6. Development and evaluation of an electronic drug and therapeutics bulletin.

    Science.gov (United States)

    Alderman, Christopher P

    2002-10-01

    To describe the development, implementation, and initial evaluation of a paperless drug and therapeutics bulletin that is distributed by electronic mail from the pharmacy department of an Australian teaching hospital. A standardized format for the bulletin was designed and approved in February 2001. The aim of the bulletin is to facilitate the timely dissemination of concise, factual information about issues of current interest in therapeutics, drug safety, and the cost-effective use of medicines. A simple and attractive graphic design was chosen, and the hospital's clinical pharmacists and drug information staff developed an initial bank of content during the period immediately preceding the launch. The bulletin is presented as a 1-page, read-only file in Word for Windows format and was initially distributed by electronic mail to all users of the hospital's computerized communication network. As the popularity of the bulletin increased, healthcare practitioners from outside of the hospital began to request permission for inclusion on the circulation list, and the content was frequently forwarded by E-mail to workers in other hospitals and community-based settings. The bulletin is now distributed to pharmacists around Australia via 2 separate moderated discussion lists, one of which provides an archive site for previous editions. Healthcare workers in Singapore, the US, Canada, and New Zealand also receive the bulletin, which is now also abstracted by a major Australian pharmacy journal. A readership survey (also electronically distributed) was used to seek feedback after the publication of the first 12 editions. Readers indicated a high level of satisfaction with the content, format, and frequency of distribution of the materials. Although the concept and execution of this project was relatively simple, an extensive literature review did not reveal any previously published reports describing this type of approach to the distribution of a pharmacy bulletin. The

  7. Testing Technology: A Sandia technology bulletin

    Energy Technology Data Exchange (ETDEWEB)

    Goetsch, B.; Floyd, H.L.; Doran, L. [eds.

    1994-08-01

    Inside this issue is a farewell to Testing Technology message from technical advisor, Ruth David. Also included are articles on: Testing the I-40 bridge over the Rio Grande, simulated reactor meltdown studies, an inexpensive monitor for testing integrated circuits, testing of antihelicoptor mines, and quality assurance on aircraft inspection.

  8. DEMONSTRATION BULLETIN: MICROFILTRATION TECHNOLOGY EPOC WATER, INC.

    Science.gov (United States)

    The EPOC mbrofiltratbn technology is designed to remove suspended solids that are 0.1 microns in diameter or larger from liquid wastes. Wastewaters containing dissolved metals are treated by chemical precipitation, so that the metal contamination present is greater than or equal...

  9. DEMONSTRATION BULLETIN: RADIO FREQUENCY HEATING - KAI TECHNOLOGIES, INC.

    Science.gov (United States)

    Radio frequency heating (RFH) is a process that uses electromagnetic energy in the radio frequency (RF) band to heat soil in situ, thereby potentially enhancing the performance of standard soil vapor extraction (SVE) technologies. An RFH system developed by KAI Technologies, I...

  10. Evaluation of sixteen years of INGV seismic Bulletins

    Directory of Open Access Journals (Sweden)

    R. Di Maro

    2006-06-01

    Full Text Available In this work we analyze earthquake parameters published in the Seismic Bulletin of the Istituto Nazionale di Geofisica e Vulcanologia (INGV The analysis and the interpretation of the digital signals, done by specialized employees daily, produce most of the seismological information that comprises INGV’s earthquake bulletins. After a brief introduction on the criteria we use to obtain seismic parameters, this paper will review the processing procedures employed over a period of sixteen years from 1988 to September 2003. This study also addresses the issue of the comparison between Magnitude calculated on signal duration (Md and on amplitude (ML and the lack of a correct calibration between them . A completeness analysis of the whole bulletin performed using both the Stepp and the Habermann techniques shows the importance of considering changes in the seismicity rate and in the geometry of the seismological network. To conclude this excursus, we calculated the errors of hypocentral locations and the detection capacity of individual seismic stations. This final step stresses the increasing improvement of the INGV seismic network over the past 16 years.

  11. Soil washing technology evaluation

    International Nuclear Information System (INIS)

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

  12. Evaluation of speciation technology

    International Nuclear Information System (INIS)

    2001-01-01

    It has been widely recognised among researchers that speciation data are essential for proper and reliable modelling of radionuclide behaviour, which is studied inter alia in the context of radioactive waste management. Participants at the OECD/NEA workshop on 'Evaluation of Speciation Technology' reviewed the various techniques used to identify different species of actinide and fission product elements present in nuclear waste and nuclear reprocessing streams. The review takes into account the advantages, disadvantages and limitations of the various methods in relation to their field of application. Recommendations for future R and D are also provided. These proceedings will primarily be of interest to chemists specialized in separation techniques and radioactive waste management experts. (author)

  13. OCRWM Bulletin

    International Nuclear Information System (INIS)

    1996-01-01

    This document is the Winter 1996 ORCWM Bulletin which is a report from the U.S. Department of Energy's Office of Civilian Radioactive Waste Management. Budget considerations and a discussion of waste policy forums are described. Several articles about the on-going site characterization at Yucca Mountain are included as a part of this bulletin.Tunnel excavations, meteorology studies, effects of seismic events, and design of a conveyor belt system are some of the topics covered in this issue

  14. Evaluative conditioning of food technologies

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2015-01-01

    Consumer attitudes play an important role in the acceptance of new technologies. The success of food innovations depends on understanding how consumers form and change attitudes toward food technologies. Earlier post hoc explanations suggest that evaluative conditioning can change consumer...... attitudes toward food technologies. The present study tests how evaluative conditioning can affect consumer acceptance of new food technologies. Furthermore, authors investigate whether evaluative conditioning is resistant to extinction after a two-month period and whether the evaluative conditioning effect...... prevails in a product-related context. Within an evaluative conditioning paradigm including between-subjects control groups in addition to standard within-subjects control conditions, participants were presented with three food technologies (conventional, enzyme, and genetic technology) paired...

  15. COMPOST-FREE BIOLOGICAL TREATMENT OF ACID ROCK DRAINAGE, TECHNICAL EVALUATION BULLETIN

    Science.gov (United States)

    As part of the Superfund Innovative Technology Evaluation (SITE) program, an evaluation of the compost-free bioreactor treatment of acid rock drainage (ARD) from the Aspen Seep was conducted at the Leviathan Mine Superfund site located in a remote, high altitude area of Alpine Co...

  16. OCRWM Bulletin

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This document is the Winter 1996 ORCWM Bulletin which is a report from the U.S. Department of Energy`s Office of Civilian Radioactive Waste Management. Budget considerations and a discussion of waste policy forums are described. Several articles about the on-going site characterization at Yucca Mountain are included as a part of this bulletin.Tunnel excavations, meteorology studies, effects of seismic events, and design of a conveyor belt system are some of the topics covered in this issue.

  17. OCRWM Bulletin

    International Nuclear Information System (INIS)

    1995-01-01

    This document is the Spring 1995 ORCWM Bulletin which is a report from the U.S. Department of Energy's Office of Civilian Radioactive Waste Management. Budget considerations, public response to waste acceptance issues, and a discussion of waste policy forums are described. Several articles about the on-going site characterization at Yucca Mountain are included as a part of this bulletin. Detection of pathways for gases and fluids in the subsurface, hydrochemistry experiments, and a description of the appointment of a new Yucca Mountain Site Characterization Office project manager are some of the topics covered in this issue

  18. Technical Bulletin, Evaluation of Land Application Systems: Evaluation Checklist and Supporting Commentary.

    Science.gov (United States)

    Environmental Protection Agency, Washington, DC. Office of Water Programs.

    This document contains a checklist and background information for the evaluation for land application systems of wastewater. It is divided into three major sections dealing with facilities plans, design plans and specifications, and operation and maintenance manuals. The focus of section one is the thorough evaluation of alternatives and the…

  19. THR Bulletin

    African Journals Online (AJOL)

    Yasin

    were collected on filter paper at days 0, 3, 7 and 14. Parasite genomic DNA ..... have a survival advantages in many parts of Africa. Reports from .... in an Area of Intense. Perennial Transmission, Kilombero District,. Tanzania. PhD. Thesis. University of Basel. pp. 150. Tanzania Health Research Bulletin Vol. 8 No. 2 May 2006.

  20. Alexandria Bulletin

    African Journals Online (AJOL)

    AmL

    2009-02-12

    Feb 12, 2009 ... S M Al-Orf. Alexandria Bulletin. 65. Bull. Alex. Fac. Med. 46 No.1, 2010. © 2010 Alexandria Faculty of Medicine. EFFECT OF GRADED LEVELS OF DATES DIETARY FIBER ON WEIGHT GAIN, SERUM. GLUCOSE AND INSULIN LEVELS OF NORMAL AND STREPTOZOTOCIN-. INDUCED DIABETIC RATS.

  1. Alexandria Bulletin

    African Journals Online (AJOL)

    AmL

    2010-02-22

    Feb 22, 2010 ... Alexandria Bulletin. 75. Bull. Alex. Fac. Med. 46 No.1, 2010. © 2010 Alexandria Faculty of Medicine. A POSSIBLE ROLE FOR GASTROPROTECTIVES ON ASPIRIN-INDUCED. GASTRIC ULCER IN RATS. Adel A Angelo,* Madiha A Hassan,* Nagwa M Nour El Din,* Hoda M Khalifa,**. Suzan A Abdel Ghany ...

  2. CODESRIA Bulletin

    African Journals Online (AJOL)

    The aim of CODESRIA quarterly Bulletin is to stimulate discussion, exchangeinformation and encourage research cooperation among African researchers. Contributions on theoretical matters, reports on conferences and seminars are welcome. It is distributed free of charge to all social science research institutes and ...

  3. THR Bulletin

    African Journals Online (AJOL)

    Yasin

    factors and gender relations. This paper looks at the influence of the sex of a child on response to febrile illness. Materials and Methods. Study area. The study was carried out in Mbaise, Imo State,. Nigeria. Mbaise is one of the most culturally distinct rural communities in Imo State, with an. Tanzania Health Research Bulletin ...

  4. Standoff Detection Technology Evaluation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Standoff Detection Technology Evaluation facility is the only one of its kind in the country and allows researchers to release a known amount of material while...

  5. EMERGING TECHNOLOGY BULLETIN: RECLAMATION OF LEAD FROM SUPERFUND WASTE MATERIAL USING SECONDARY LEAD SMELTERS

    Science.gov (United States)

    This process involves incorporating lead-contaminated Superfund waste with the regular feed to a secondary lead smelter. Since secondary lead smelters already recover lead from recycled automobile batteries, it seems likely that this technology could be used to treat waste from ...

  6. DEMONSTRATION BULLETIN: TERRA KLEEN SOLVENT EXTRACTION TECHNOLOGY - TERRA-KLEEN RESPONSE GROUP, INC.

    Science.gov (United States)

    The Terra-Kleen Solvent Extraction Technology was developed by Terra-Kleen Response Group, Inc., to remove polychlorinated biphenyls (PCB) and other organic constituents from contaminated soil. This batch process system uses a proprietary solvent at ambient temperatures to treat ...

  7. Corrosion evaluation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Uh Chul; Han, Jeong Ho; Nho, Kye Ho; Lee, Eun Hee; Kim, Hong Pyo; Hwang, Seong Sik; Lee, Deok Hyun; Hur, Do Haeng; Kim, Kyung Mo

    1997-09-01

    A multifrequency ACPD system was assembled which can measure very small crack. Stress corrosion cracking test system with SSRT operating high temperature was installed. Stress corrosion cracking test of newly developed alloy 600 and existing alloy 600 was carried out in steam atmosphere of 400 deg C. No crack was observed in both materials within a test period of 2,000 hrs. Corrosion fatigue test system operating at high temperature was installed in which fatigue crack was measured by CDPD. Lead enhanced the SCC of the Alloy 600 in high temperature water, had a tendency to modify a cracking morphology from intergranular to transgranular. Pit initiation preferentially occurred at Ti-rich carbide. Resistance to pit initiation decreased with increasing temperature up to 300 deg C. Test loop for erosion corrosion was designed and fabricated. Thin layer activation technique was very effective in measuring erosion corrosion. Erosion corrosion of a part of secondary side pipe was evaluated by the Check Family Codes of EPRI. Calculated values of pipe thickness by Check Family Codes coincided with the pipe thickness measured by UT with an error of {+-} 20%. Literature review on turbine failure showed that failure usually occurred in low pressure turbine rotor disc and causes of failure are stress corrosion cracking and corrosion fatigue. (author). 12 refs., 20 tabs., 77 figs.

  8. Economic evaluation of medical technologies.

    Science.gov (United States)

    Seifan, Alon; Shemer, Joshua

    2005-02-01

    Innovation in medical science is progressing at a rapid pace. As a result, new medical technologies that offer to improve upon or completely replace existing alternatives are continually appearing. These technologies--which include pharmaceuticals, devices, equipment, supplies, medical and surgical procedures, and administrative and support systems--are changing the way medicine can be practiced and delivered, forcing healthcare providers and policymakers to consistently evaluate and adapt to new treatment options. Meanwhile, society is becoming more demanding of new medical technologies. Emerging medical technology, however, has been viewed as a significant factor in increasing the cost of healthcare. The abundance of new medical alternatives, combined with scarcity of resources, has led to priority setting, rationing and the need for more technology management and assessment. Economic evaluation of medical technologies is a system of analysis used to formally compare the costs and consequences of alternative healthcare interventions. EEMT can be used by many healthcare entities, including national policymakers, manufacturers, payers and providers, as a tool to aid in resource allocation decisions. This paper discusses the four current popular methodologies for EEMT (cost-minimization, cost-benefit, cost-effectiveness and cost-utility), and describes the industry environment that has shaped their development.

  9. Social Security Bulletin

    Data.gov (United States)

    Social Security Administration — The Social Security Bulletin (ISSN 1937-4666) is published quarterly by the Social Security Administration. The Bulletin is prepared in the Office of Retirement and...

  10. Endangered Species Protection Bulletins

    Science.gov (United States)

    Endangered Species Protection Bulletins set forth geographically specific pesticide use limitations for the protection of threatened and endangered (listed) species and their designated critical habitat. Find out how to get and use Bulletins.

  11. Geomagnetic Indices Bulletin (GIB)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Geomagnetic Indices Bulletin is a one page sheet containing the magnetic indices Kp, Ap, Cp, An, As, Am and the provisional aa indices. The bulletin is published...

  12. Bulletin Bibliographique

    OpenAIRE

    Airiau, Paul; Airiau, Paul; Airiau, Paul; Allouche-Benayoun, Joëlle; Arminjon, Constance; Aubin, Françoise; Aubin, Françoise; Aubin, Françoise; Aubin, Françoise; Aubourg, Valérie; Azria, Régine; Azria, Régine; Azria, Régine; Béraud, Céline; Béraud, Céline

    2013-01-01

    Ce numéro du Bulletin Bibliographique combine plus d’une centaine de comptes rendus de livres avec des notes critiques et des lectures sous plusieurs angles d’ouvrages marquants. La première note critique révèle la richesse des parutions et la vitalité des questionnements sur la pluralité des religions en Extrême-Orient. La seconde se penche sur la plasticité de la notion sans cesse renouvelée de chamanisme dans l’Asie de l’Est. La troisième traite de la manière dont le philosophe Jacques Bo...

  13. Engineering Manpower Bulletin, Number 16.

    Science.gov (United States)

    Engineers Joint Council, New York, NY. Engineering Manpower Commission.

    This bulletin presents the highlights of an evaluation of today's engineering graduates as seen by the managers of engineering, manufacturing and technical marketing in a major electrical equipment manufacturing company. Today's engineer is seen as far more productive than his predecessor. The computer has greatly expanded his productive capacity.…

  14. The Bulletin turns 50!

    CERN Multimedia

    2015-01-01

    What does the Bulletin mean to you? Send us your thoughts!   Fifty years ago, on 30 March 1965, the CERN Bulletin – or the Weekly Bulletin as it was known in those days – was born. It was just a simple newsletter back then, but the Bulletin has changed over the years to become a proper magazine bringing together articles on scientific and technical subjects as well as the latest news from the Laboratory and its personnel. And so, over time, the CERN Bulletin has become - the editors would like to think – an icon of the Laboratory, to which the people of CERN are very attached. If you agree, please send us your comments! Whatever theme you want to highlight – reading habits, anecdotes, scientific discoveries – we’d like to hear what the Bulletin means to you. These messages will be published in our anniversary edition on 27 March. The CERN Bulletin team

  15. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Rajkumar. Articles written in Bulletin of Materials Science. Volume 25 Issue 6 November 2002 pp 549-551. Semiconductor applications of plasma immersion ion implantation technology · Mukesh Kumar Rajkumar Dinesh Kumar P J George · More Details Abstract Fulltext PDF.

  16. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Dinesh Kumar. Articles written in Bulletin of Materials Science. Volume 25 Issue 6 November 2002 pp 549-551. Semiconductor applications of plasma immersion ion implantation technology · Mukesh Kumar Rajkumar Dinesh Kumar P J George · More Details Abstract Fulltext ...

  17. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  18. Evaluation of responses to IE Bulletin 82-02: degradation of threaded fasteners in reactor coolant pressure boundary of pressurized-water-reactor plants

    International Nuclear Information System (INIS)

    Anderson, W.; Sterner, P.

    1985-05-01

    IE Bulletin 82-02 was issued by the NRC on June 2, 1982, to notify licensees about incidents of severe degradation of threaded fasteners. The bulletin required appropriate action including submittal of information from pressurized water reactors having an operating license. Responses from 41 licensees included their recent experience with degradation of threaded fasteners in primary system components. Data from recent regular inspections of reactor coolant pressure boundary component connections of 6-in. size and larger are compiled for technical evaluation. Statistical analysis is used to determine significant factors related to frequency of leakage incidents in connections, occurrence of degradation of bolts and studs, and the need for bolt replacement. Factors examined include the age of the plant, types of components, use of lubricants and sealants, and differences between plants. The compiled data indicate that, on the average, 10% of the bolted connections show evidence of leaking during an 18-month period. Also, 80% of the connections that show evidence of leakage undergo some degradation of the bolting. Results of the analysis show a significant decrease in the occurrence of bolting degradation events as the age of the plant increases. The data also show that valves are less subject to bolting corrosion. A group of 5 of the 41 plants accounted for about one-half of the reported leakage and corrosion events. The common characteristic found for four of these five plants was the lubricant used. The use of nickel-graphite based lubricants appears to offer a significantly reduced incidence of leakage and corrosion, based on late corrections to the reported data. The data also permit the conclusion that the use of molybdenum-disulfide-based lubricants and graphite-based lubricants results in a significantly increased incidence of leakage and corrosion. Reporting of data on lubricants was of poor quality and detracted from the value of the bulletin responses

  19. Publication of the Bulletin

    CERN Multimedia

    The final edition (Nos 51-52/2009 and 1-2/2010) of the last Weekly Bulletin of the year will be published on Friday 11 December and will cover events at CERN from 14 December 2009 to 8 January 2010. Announcements for publication in this issue should reach the Publication Section (Communications group) or the Staff Association, as appropriate, by noon on Tuesday 8 December. Bulletin publication 2010 The table below lists the 2010 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Paper version 2-3 Tuesday 5 January Friday 8 and 15 January Wednesday 13 J...

  20. 76 FR 37344 - Technology Evaluation Process

    Science.gov (United States)

    2011-06-27

    ...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... evaluation process. The stakeholder comment period is being extended an additional 30 days to give potential... seeks comments and information related to a commercial buildings technology evaluation process. DOE is...

  1. A Training Technology Evaluation Tool

    National Research Council Canada - National Science Library

    Livingston, Stephen C; Dyer, Jean L; Swinson, Diadra

    2005-01-01

    .... The overall ratings reflect the initial performance of the Soldiers to be trained on the tasks covered by the training technology, task and subtask characteristics, learning difficulty, residual...

  2. Technology Games: Using Wittgenstein for Understanding and Evaluating Technology.

    Science.gov (United States)

    Coeckelbergh, Mark

    2017-08-15

    In the philosophy of technology after the empirical turn, little attention has been paid to language and its relation to technology. In this programmatic and explorative paper, it is proposed to use the later Wittgenstein, not only to pay more attention to language use in philosophy of technology, but also to rethink technology itself-at least technology in its aspect of tool, technology-in-use. This is done by outlining a working account of Wittgenstein's view of language (as articulated mainly in the Investigations) and by then applying that account to technology-turning around Wittgenstein's metaphor of the toolbox. Using Wittgenstein's concepts of language games and form of life and coining the term 'technology games', the paper proposes and argues for a use-oriented, holistic, transcendental, social, and historical approach to technology which is empirically but also normatively sensitive, and which takes into account implicit knowledge and know-how. It gives examples of interaction with social robots to support the relevance of this project for understanding and evaluating today's technologies, makes comparisons with authors in philosophy of technology such as Winner and Ihde, and sketches the contours of a phenomenology and hermeneutics of technology use that may help us to understand but also to gain a more critical relation to specific uses of concrete technologies in everyday contexts. Ultimately, given the holism argued for, it also promises a more critical relation to the games and forms of life technologies are embedded in-to the ways we do things.

  3. Bulletin timetable for 2010

    CERN Multimedia

    CERN Bulletin

    2009-01-01

    The table below lists the 2010 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Paper version 2-3 Tuesday 5 January Friday 8 and 15 January Wednesday 13 January 4-5 Tuesday 19 January Friday 22 and 29 January Wednesday 27 January 6-7 Tuesday 2 February Friday 5 and 12 february Wednesday 10 February 8-9 Tuesday 16 February Friday 19 and 26 February ...

  4. Evaluation of the cleaner technology programme

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou; Jørgensen, Ulrik

    The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination of the dissemi......The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination...... of the dissemination of cleaner technology solutions achieved in six industrial branches, and on the overall programme and its effects, in particular environmental impacts, but also results in the form of employment, environmental export, strenghtening of Danish know-how etc....

  5. Evaluating Internal Technological Capabilities in Energy Companies

    Directory of Open Access Journals (Sweden)

    Mingook Lee

    2016-03-01

    Full Text Available As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsistent results when different models are used. To solve these problems, this paper proposes a comprehensive framework for evaluating technological capabilities in energy companies by considering the complex properties of technological knowledge. For this purpose, we first explored various factors affecting technological capabilities and divided the factors into three categories: individual, organizational, and technology competitiveness. Second, we identified appropriate evaluation items for each category to measure the technological capability. Finally, by using a hybrid approach of qualitative and quantitative methods, we developed an evaluation method for each item and suggested a method to combine the results. The proposed framework was then verified with an energy generation and supply company to investigate its practicality. As one of the earliest attempts to evaluate multi-faceted technological capabilities, the suggested model can support technology and strategic planning.

  6. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. P K Panda. Articles written in Bulletin of Materials Science. Volume 25 Issue 2 April 2002 pp 127-132 Ceramic Materials. Evaluation of thermal shock resistance of cordierite honeycombs · Rathindra Nath Das C D Madhusoodana P K Panda Kiyoshi Okada · More Details ...

  7. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. S K Das. Articles written in Bulletin of Materials Science. Volume 24 Issue 4 August 2001 pp 373-378 Metals and Alloys. Evaluation of solid–liquid interface profile during continuous casting by a spline based formalism · S K Das · More Details Abstract Fulltext PDF. A numerical ...

  8. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. A S Singha. Articles written in Bulletin of Materials Science. Volume 31 Issue 1 February 2008 pp 7-13 Polymers. Pressure induced graft-co-polymerization of acrylonitrile onto Saccharum cilliare fibre and evaluation of some properties of grafted fibre · A S Singha Anjali Shama ...

  9. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. S R Dharwadkar. Articles written in Bulletin of Materials Science. Volume 26 Issue 7 December 2003 pp 667-671 Catalysis. A simple red-ox titrimetric method for the evaluation of photo-catalytic activity of titania based catalysts · Y S Satpute S A Borkar S R Dharwadkar.

  10. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Fathollah Moztarzadeh. Articles written in Bulletin of Materials Science. Volume 36 Issue 7 December 2013 pp 1339-1346. Synthesis, characterization and evaluation of bioactivity and antibacterial activity of quinary glass system (SiO2–CaO–P2O5–MgO–ZnO): In vitro study.

  11. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Deepak Jain. Articles written in Bulletin of Materials Science. Volume 27 Issue 3 June 2004 pp 227-233 Composites. Evaluation of a.c. conductivity behaviour of graphite filled polysulphide modified epoxy composites · Navin Chand Deepak Jain · More Details Abstract Fulltext ...

  12. Evaluating Internal Technological Capabilities in Energy Companies

    OpenAIRE

    Mingook Lee; Sungjoo Lee

    2016-01-01

    As global competition increases, technological capability must be evaluated objectively as one of the most important factors for predominance in technological competition and to ensure sustainable business excellence. Most existing capability evaluation models utilize either quantitative methods, such as patent analysis, or qualitative methods, such as expert panels. Accordingly, they may be in danger of reflecting only fragmentary aspects of technological capabilities, and produce inconsiste...

  13. Field Research and Evaluation Technology

    Science.gov (United States)

    Ianni, Francis A. J.

    1977-01-01

    Discusses the utility of field research techniques for the evaluation of educational programs in general and the Minneapolis South East Alternatives Program in particular. Examines relationships between theory, field research, and evaluation in education and describes a pattern of relationships that has evaluative utility and provides responsible…

  14. New Bulletin: Latest News

    CERN Multimedia

    2005-01-01

    The paper version of the CERN Bulletin will be published twice a month with effect from 18 April 2005. The electronic version will be updated weekly. This year will see many changes in the Bulletin, designed to make it more economical, more compact and more attractive.

  15. IDRC Bulletin #122

    International Development Research Centre (IDRC) Digital Library (Canada)

    2017-09-24

    Sep 24, 2017 ... ... and don't forget to apply to our call to strengthen engineering research and training in Africa. IDRC Bulletin logo IDRC Bulletin — September 2017. Featured this month. An older woman signing papers. Expert Talks: Understanding civil registration and vital statistics systems. Housed at IDRC, the Centre ...

  16. IDRC Bulletin #127

    International Development Research Centre (IDRC) Digital Library (Canada)

    In this issue, learn how scaling science can maximize social impact; find out how a new digital economy is changing the Haitian labour market for young women; and don't forget to apply to our new call for proposals. IDRC Bulletin logo IDRC Bulletin — March 2018. Featured this month. A worker from Caritas Homabay is ...

  17. Bulletin du CRDI #123

    International Development Research Centre (IDRC) Digital Library (Canada)

    Dans ce numéro, découvrez comment les travaux de recherche que nous finançons contribuent à l'autonomisation des femmes. Apprenez-en plus sur notre nouveau partenariat avec Cancer Research UK, et n'oubliez pas de participer à notre Assemblée publique annuelle. Logo du Bulletin du CRDI Bulletin du CRDI ...

  18. Publication of the bulletin

    CERN Multimedia

    DG Unit

    2010-01-01

    The final edition (Nos 50-51-52/2010 and 1-2/2011) of the last Weekly Bulletin of the year will be published on Friday 10 December and will cover events at CERN from 13 December 2010 to 14 January 2011. Announcements for publication in this issue should reach the Publication Section (Communication group) or the Staff Association, as appropriate by noon, on Tuesday 7 December. The table below lists the 2011 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Printed version 3-4   Tuesday 11 January Fridays 14 and 21 January Wednes...

  19. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  20. Evaluating roadway surface rating technologies.

    Science.gov (United States)

    2015-06-01

    The key project objective was to assess and evaluate the feasibility and accuracy of : custom software used in smartphones to measure road roughness from the : accelerometer data collected from smartphones and compare results with PASER : (Pavement S...

  1. Publication of the bulletin

    CERN Multimedia

    2007-01-01

    The final edition (Nos 51-52/2007 and 1-2-3/2008) of the last Bulletin of the year will appear on Friday 14 December and will cover events at CERN from 17 December 2007 to 18 January 2008. Announcements for publication in this issue should reach the Publication Section (Communication group) or the Staff Association, as appropriate, by noon on Tuesday 11 December. The table below lists the 2008 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin publication 2008 Bulletin N° 4-5 Publication: Monday 21 january Submission deadline for announcements: Tuesday 15 January Bulletin N° 6-7 Publication: Monday 4 february Submission deadline for announcements: Tuesday 29 January Bulletin N° 8-9 Publication: Monday 18 february Submission deadline for announcements: Tuesday 12 February Bulletin N° 10-11 P...

  2. Alexandria Bulletin

    African Journals Online (AJOL)

    AmL

    spine, entire body involvement, and the signal intensity of involved vertebral bodies were evaluated.), intervertebral disc items as (disc space). ,Spinal canal items as ( meningeal and spinal cord involvement), The post contrast evaluation including the degree and pattern of the enhancement of the lesion , and finally we did ...

  3. Evaluative conditioning of food technologies in China

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2014-01-01

    This study provides an initial examination of the evaluative conditioning (EC) of consumers’ attitudes toward food technologies in China, including how EC can affect consumer acceptance of new technology when participants possess different levels of social trust. In a study using the EC paradigm...... formation toward food technologies in China when consumers see affective images, but the strength of the effects varies at different levels of social trust. Participants with a high level of trust in the institutions that promote and regulate the technologies can be conditioned both positively...... and negatively, independent of food technology. Participants with a low level of trust can be conditioned too, but only when the technology is paired with negative unconditioned stimuli. If social trust is low, positive conditioning of food technologies is not demonstrated in this study....

  4. Evaluation of Hydrogel Technologies for the Decontamination ...

    Science.gov (United States)

    Report This current research effort was developed to evaluate intermediate level (between bench-scale and large-scale or wide-area implementation) decontamination procedures, materials, technologies, and techniques used to remove radioactive material from different surfaces. In the event of such an incident, application of this technology would primarily be intended for decontamination of high-value buildings, important infrastructure, and landmarks.

  5. Evaluating innovation networks in emerging technologies

    NARCIS (Netherlands)

    Valk, T. van der; Chappin, M.M.H.; Gijsbers, G.W.

    2011-01-01

    Interorganisational innovation networks are increasingly important for innovation in emerging technology fields. The performance of such networks can have a large impact on the future development of emerging technologies. A useful framework for the evaluation of innovation networks however does not

  6. Evaluative conditioning of food technologies in China

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2014-01-01

    This study provides an initial examination of the evaluative conditioning (EC) of consumers’ attitudes toward food technologies in China, including how EC can affect consumer acceptance of new technology when participants possess different levels of social trust. In a study using the EC paradigm...... and a combination of between-subjects control groups and within-subjects control conditions, participants considered three food technologies (conventional, enzyme, and genetic), paired with affectively positive, neutral, and negative images. Subsequent evaluative measurements revealed that EC can explain attitude...... formation toward food technologies in China when consumers see affective images, but the strength of the effects varies at different levels of social trust. Participants with a high level of trust in the institutions that promote and regulate the technologies can be conditioned both positively...

  7. Advanced waste management technology evaluation

    Science.gov (United States)

    Couch, H.; Birbara, P.

    1996-01-01

    The purpose of this program is to evaluate the feasibility of steam reforming spacecraft wastes into simple recyclable inorganic salts, carbon dioxide and water. Model waste compounds included cellulose, urea, methionine, Igapon TC-42, and high density polyethylenes. These are compounds found in urine, feces, hygiene water, etc. The gasification and steam reforming process used the addition of heat and low quantities of oxygen to oxidize and reduce the model compounds.The studied reactions were aimed at recovery of inorganic residues that can be recycled into a closed biologic system. Results indicate that even at very low concentrations of oxygen (less than 3%) the formation of a carbonaceous residue was suppressed. The use of a nickel/cobalt reforming catalyst at reaction temperature of 1600 degrees yielded an efficient destruction of the organic effluents, including methane and ammonia. Additionally, the reforming process with nickel/cobalt catalyst diminished the noxious odors associated with butyric acid, methionine and plastics.

  8. Sustainability evaluation of water supply technologies

    DEFF Research Database (Denmark)

    Godskesen, Berit

    -criteria decision analysis method was used to develop a decision support system and applied to the study. In this thesis a standard LCA of the drinking water supply technology of today (base case) and 4 alternative cases for water supply technologies is conducted. The standard LCA points at the case rain......Sustainability evaluation of water supply systems is important to include in the decision making process when planning new technologies or resources for water supply. In Denmark the motivations may be many and different for changing technology, but since water supply is based on groundwater...... the main driver is the limitations of the available resource from the groundwater bodies. The environmental impact of products and systems can be evaluated by life-cycle assessment (LCA) which is a comprehensive and dominant decision support tool capable of evaluating a water system from the cradle...

  9. Technology evaluation for time sensitive data transport

    DEFF Research Database (Denmark)

    Wessing, Henrik; Breach, Tony; Colmenero, Alberto

    Backbone Bridging (PBB), “Transparent Interconnect of Lots of Links” (TRILL) to Optical Transport Network (OTN) and SDH. The transport technologies are evaluated theoreti-cally, using simulations and/or experimentally. Each transport technology is evaluated based on its performances and capabilities....... The NREN communities must provide underlying network infrastructures and transport technologies to facilitate ser-vices with such requirements to the network. In this paper we investigate and evaluate circuit and packet based transport technologies from classic best effort IP over MPLS flavours, Provider......Emerging research and commercial services like IPTV, high quality video conferencing, remote surgeries and cloud computing in particular are time sensitive and their successful deployment assumes network with minimal delay and jitter in combination with high bandwidth and preferably low packet loss...

  10. Market bulletin - February 1991

    International Nuclear Information System (INIS)

    1991-01-01

    This bulletin deals with the brazilian electric power consumption in February 1991, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  11. Market bulletin - December 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in December 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  12. Market bulletin - December 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in December 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  13. Market bulletin - March 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in March 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  14. Market bulletin - October 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in October 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  15. Market bulletin - November 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in November 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  16. Market bulletin - July 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in July 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  17. Market bulletin - November 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in November 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  18. Market bulletin - April 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in April 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  19. Market bulletin - September 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in September 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  20. Market bulletin - April 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in April 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  1. Market bulletin - April 1991

    International Nuclear Information System (INIS)

    1991-01-01

    This bulletin deals with the brazilian electric power consumption in April 1991, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  2. Market bulletin - May 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in May 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  3. Market bulletin - June 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in June 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  4. Market bulletin - September 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in September 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  5. Market bulletin - May 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in May 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  6. Market bulletin - June 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in June 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  7. Market bulletin - January 1991

    International Nuclear Information System (INIS)

    1991-01-01

    This bulletin deals with the brazilian electric power consumption in January 1991, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  8. Market bulletin - March 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in March 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  9. Market bulletin - January 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in January 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  10. Market bulletin - February 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in February 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  11. Market bulletin - August 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in August 1990, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  12. Market bulletin - August 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in August 1989, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  13. Market bulletin - March 1991

    International Nuclear Information System (INIS)

    1991-01-01

    This bulletin deals with the brazilian electric power consumption in March 1991, containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. (C.G.C.)

  14. IDRC Bulletin #123

    International Development Research Centre (IDRC) Digital Library (Canada)

    Subscribe | Unsubscribe. Subscribe to IDRC's regional newsletters. Asia | Latin America and the Caribbean | Middle East and North Africa | Sub-Saharan Africa Questions or comments? Send us your feedback at bulletin@idrc.ca. Canada ...

  15. Publication of the bulletin

    CERN Multimedia

    DSU Unit

    2008-01-01

    The final edition (Nos 51-52/2008 and 1-2/2009) of the last Weekly Bulletin of the year will be published on Friday 12 December and will cover events at CERN from 15 December 2008 to 12 January 2009. Announcements for publication in this issue should reach the Publication Section (Communication group) or the Staff Association, as appropriate by noon, on Tuesday 9 December. Bulletin publication 2009 The table below lists the 2009 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Publication date 3-4 Tuesday 6 January Monday 12 January 5-6 Tuesday 20 January Monday 26 January 7-8 Tuesday 3 February Monday 9 February 9-10 Tuesday 17 Februar...

  16. CBP Quota Bulletins

    Data.gov (United States)

    Department of Homeland Security — Quota information is issued for the trade community by the Quota Enforcement Administration Branch within the Office of International Trade. The Quota Bulletins have...

  17. Solar Indices Bulletin

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Solar Indices Bulletin is a prompt monthly information product that is distributed within two weeks after the observation month closes. For the month just ended,...

  18. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  19. Bulletin publication schedule

    CERN Multimedia

    Publications Section, DG-CO Group

    2011-01-01

    The final edition (Nos 51-52/2011 and 1-2-3/2012) of the Bulletin this year will be published on Friday 16 December and will cover events at CERN from 19 December 2011 to 19 January 2012. Announcements for publication in this issue should reach the Communication Group or the Staff Association, as appropriate, by noon on Tuesday 13 December. Bulletin publication schedule for 2012 The table below lists the 2012 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 noon on Tuesdays at the latest.   Bulletin No. Week number Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Printed version 4-5   Tuesday 17 January Fridays 20 and 27 January Wednesday25 January 6-7   Tuesday 31 January Fridays 3 and 10 February Wednesday 8 February 8-9 Tuesday 14 February Fridays 17 and 24 february Wednesday 22 Februa...

  20. Bulletin Survey - Early Results

    CERN Multimedia

    2002-01-01

    There was a good response to our questionnaire on the Bulletin (around 450 so far). Many thanks to all of you - your views are invaluable to us. Pending publication of the full figures, which will give latecomers time to take part in the survey, here we give here answers some of your most frequent comments. Thank you for the many warm tributes and messages of encouragement we received. We also received criticisms about the way information is handled in the Bulletin and on its circulation. In today's issue we reply to these two points. Why is the Bulletin politically correct ? Many respondents reproach the Bulletin for a lack of objectivity and for being too politically correct to the point of being a propaganda organ. It is true that the Bulletin is not a newspaper, but rather a bulletin of communication (like SLAC's Beam Line). What is the difference ? A newspaper is objectively independent of the subjects it reports on, and when its reporters write stories they dig around for information from all parties...

  1. Bulletin Survey: Technical clarifications

    CERN Multimedia

    2002-01-01

    In the latest of our articles on the results of the Bulletin survey, we respond to some of your technical comments on the Electronic Bulletin. Many thanks to the more than 500 of you who completed the questionnaire. The full statistics will be published next week. 'It takes too long to download the pages' Yes, it's true that the Electronic Bulletin's download time isn't perfect but it will improve when the Bulletin migrates to another, faster database. 'I find it very difficult to locate all the articles' Some people experience difficulty negotiating their way through the Bulletin once they have entered a specific section. The blue column on the left contains an 'In this issue' link taking you to the other sections. What's more, the whole of the paper Bulletin is available in the electronic version. As the latter is relatively new, however, it will take a bit of time to get used to browsing through it. Many of you say that it's still too early to form an opinion. 'Pull-down menus would be good, so that yo...

  2. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  3. Performance Evaluation Methods for Assistive Robotic Technology

    Science.gov (United States)

    Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

    Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

  4. Credit Cards. Bulletin No. 721. (Revised.)

    Science.gov (United States)

    Fox, Linda Kirk

    This cooperative extension bulletin provides basic information about credit cards and their use. It covers the following topics: types of credit cards (revolving credit, travel and entertainment, and debit); factors to consider when evaluating a credit card (interest rates, grace period, and annual membership fee); other credit card costs (late…

  5. Involving stakeholders in evaluating environmental restoration technologies

    International Nuclear Information System (INIS)

    McCabe, G.H.; Serie, P.J.

    1993-02-01

    Involving citizens, interest groups, and regulators in environmental restoration and waste management programs is a challenge for government agencies and the organizations that support them. To be effective, such involvement activities must identify all individuals and groups who have a stake in the cleanup. Their participation must be early, substantive, and meaningful. Stockholders must be able to see how their input was considered and used, and feel that a good- faith effort was made to reconcile conflicting objectives. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is a Department of Energy Office of Technology Development project located at Hanford. Along with technical evaluation of innovative cleanup technologies, the program is conducting an institutional assessment of regulatory and public acceptance of new technologies. Through a series of interviews and workshops, and use of a computerized information management tool, stakeholders are having a voice in the evaluation. Public and regulatory reaction has been positive

  6. Technology Evaluation Report: Non-destructive ...

    Science.gov (United States)

    Technology Evaluation Report HSRP is working to develop tools and information that will help detect the intentional introduction of chemical or biological contaminants in buildings or water systems, the containment of these contaminants, the decontamination of buildings and/or water systems, and the management of wastes generated from decontamination and cleanup operations. Evaluation of the performance of CBI Polymers’ DeconGelTM 1108, Environmental Alternatives, Inc.’s (EAI’s) Rad-Release II (RRII), Environmental Alternatives, Inc.’s SuperGel, and Intek Technologies’ LH-21. The objective of evaluating these technologies was to test their ability to remove radioactive cesium (Cs)-137 from the mixed building material coupons of brick with mortar, tile with grout, granite with mortar, all mortar and all grout coupons.

  7. Evaluating a speech-language pathology technology.

    Science.gov (United States)

    Pulga, Marina Jorge; Spinardi-Panes, Ana Carulina; Lopes-Herrera, Simone Aparecida; Maximino, Luciana Paula

    2014-03-01

    The creation of new educational strategies based on technology is the essence of telehealth. This innovative learning is an alternative to promote integration and improve the professional practices in speech-language pathology (SLP). The objective of this study was to evaluate an SLP technology designed for distance learning. The survey selected fourth-year SLP students (n=60) from three public universities in the state of São Paulo, Brazil. The experimental group (EG) contained 10 students from each university (n=30), and the remaining students formed the control group (CG). Initially, both groups answered a preprotocol questionnaire, and the EG students received the technology, the recommendations, and the deadline to explore the material. In the second stage all students answered the postprotocol questionnaire in order to evaluate the validity and the learning of the technology contents. The comparison between the CG students showed that their performance worsened in the majority in comparison with the EG students, who showed an improved performance. Therefore, this study concluded that the technology instrument actually responded to the population studied and is recommended to complement traditional teaching.

  8. Technologies for evaluating fish passage through turbines

    Energy Technology Data Exchange (ETDEWEB)

    Weiland, Mark A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, Thomas J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2003-10-01

    This study evaluated the feasibility of two types of technologies to observe fish and near neutrally buoyant drogues as they move through hydropower turbines. Existing or reasonably modified light-emitting and ultrasonic technologies were used to observe flow patterns, the response of fish to flow, and interactions between fish and turbine structures with good spatial and temporal accuracy. This information can be used to assess the biological benefits of turbine design features such as reductions in gaps at the tips and hub of turbine runner blades, reshaping wicket gates and stay vanes, modifications to draft tube splitter piers, and design changes that enhance egress through the powerhouse and tailrace.

  9. Utilising digital technology for dialogue and evaluation

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2016-01-01

    This article investigates how digital technology can enhance evaluation and eflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora...... as dialogue facilitators. The article suggests methods for assessing enagement/disengagement instead of presence/absence in a theory lesson at a university college. The article compares and contrasts the practical use of Socrative and Online Discussions Forums in order to shed light on their different...

  10. Utilising digital technology for dialogue and evaluation

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas

    2016-01-01

    This article investigates how digital technology can enhance evaluation and reflection through dialogue in a theory lesson in the context of university college teaching. The pedagogical designs in the article vary from synchronous classroom evaluation on smartphones, to online discussion fora...... as dialogue facilitators. The article suggests methods for assessing engagement/disengagement instead of presence/absence in a theory lesson at a university college. The article compares and contrasts the practical use of Socrative and Online Discussions Forums in order to shed light on their different...

  11. NATIONAL TECHNOLOGICAL INITIATIVE: EVALUATION OF PERSPECTIVES OF RUSSIA'S TECHNOLOGICAL LEADERSHIP

    OpenAIRE

    N. G. Kurakova; A. N. Petrov

    2015-01-01

    There were analysed scientific-technological solutions which are suggested to be included in the National Technological Initiative «New Production technologies» (NSI-NPT). Considering that Russian President set a target to become a technological leader and conquer the noticeable niches of global products and services markets using technologies, the attention has been drawn to the fact that readiness to influence markets of high-technological products is defined by the shares of patents, recei...

  12. RESEARCH BULLETIN. NUMBER 2.

    Science.gov (United States)

    American Foundation for the Blind, New York, NY.

    THE FOLLOWING REPORTS CONCERNING RESEARCH WITH THE VISUALLY HANDICAPPED ARE CONTAINED IN THIS BULLETIN--"SELECTED IMPAIRMENTS BY ETIOLOGY AND ACTIVITY LIMITATION, UNITED STATES, JULY 1959-JUNE 1961,""AN EXPERIMENT USING REVISED STIMULUS PRESENTATION" BY S. KARP, "EXPERIMENTS IN TACTUAL PERCEPTION" BY S. KARP, "A STUDY OF BRAILLE CODE REVISIONS" BY…

  13. Market bulletin - February 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in February 1989, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C.)

  14. Market bulletin - July 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in July 1989, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C.)

  15. New Bulletin: Latest News

    CERN Document Server

    2005-01-01

    The paper version of the CERN Bulletin will be published twice a month with effect from 18 April 2005. The electronic version will be updated weekly. This year will see many changes in the Bulletin, designed to make it more economical, more compact and more attractive. From 18 April the paper version of the Bulletin will be published twice monthly, so we shall have to stop calling it the "Weekly". The purpose of this change in publication frequency is to redistribute the resources of the Publications Section of the Communications Group so that it can produce new brochures for the general public. However, so as not to compromise on topicality and communication of information, the Official News and General Information sections, the Pension Fund and training announcements and the seminar schedule will continue to be updated weekly. If you have signed up to be informed of the updates, you will continue to receive a weekly e-mail reminding you that the electronic version of the Bulletin has been updated. Offici...

  16. EUDISED R & D Bulletin.

    Science.gov (United States)

    Council of Europe, Strasbourg (France). Documentation Center for Education in Europe.

    The EUDISED project, which was started in 1968, is a computer-based network of national agencies dealing with the main fields of educational information. Listed in this bulletin for 1976 are on-going and completed projects in educational research and development reported from Austria, Finland, France, Federal Republic of Germany, Norway, Spain,…

  17. IDRC Bulletin CRDI #110

    International Development Research Centre (IDRC) Digital Library (Canada)

    An employee at a print shop in Peru carries a stack of paper on his head. Canadian Geographic: Greening South America, one business at a time. Alanna Mitchell explores how small and ... Questions or comments? Send us your feedback at bulletin@idrc.ca. Connect with us: Follow us on Twitter · Follow us on Facebook ...

  18. Safety Bulletin 2013-4

    CERN Document Server

    HSE Unit

    2013-01-01

    The HSE Unit has just released the Safety Bulletin 2013-4 entitled “Electrical work: protect yourself!”.   The Bulletin is available on EDMS under the following number: 1336918. We would like to remind you that HSE Safety Bulletins are published in English and French and share feedback from incidents/near misses/accidents that have occurred on the CERN site with the aim of improving prevention.

  19. Safety Bulletin 2013-2

    CERN Multimedia

    HSE Unit

    2013-01-01

    The HSE Unit just released the Safety Bulletin 2013-2 entitled “Protect your head!”.   The Bulletin is available on EDMS under the following number: 1323573. We would like to remind you that HSE Safety Bulletins are published in English and French and share feedback from incidents/near misses/accidents that have occurred on the CERN site with the aim of improving prevention.

  20. Safety Bulletin 2013-3

    CERN Multimedia

    HSE Unit

    2013-01-01

    The HSE Unit just released the Safety Bulletin 2013-3 entitled “Drive with caution!”.   The Bulletin is available on EDMS under the following number: 1325442. Be reminded  that HSE Safety Bulletins are published in English and French and share feedbacks of incidents/nearmiss/accidents that happened on the CERN site with the aim to improve prevention.

  1. Safety Bulletin 2013-1

    CERN Multimedia

    HSE Unit

    2013-01-01

    The HSE Unit has just released the Safety Bulletin 2013-1 entitled “When the alarm rings, you must leave!”.   The Bulletin is available on EDMS under the following number: 1307611. Be reminded  that HSE Safety Bulletins are published in English and French and share feedback on incidents/nearmiss/accidents on the CERN site with the aim of improving prevention.

  2. Development of technology for next generation reactor - Research of evaluation technology for nuclear power plant -

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jong Kyun; Chang, Moon Heuy; Hwang, Yung Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)] [and others

    1993-09-01

    For development of next generation reactor, a project for evaluation technology for nuclear power plant is performed. Evaluation technology is essential to next generation reactor for reactor safety and system analysis. For design concept, detailed evaluation technologies are studied as follows: evaluation of safety margin, evaluation of safety facilities, evaluation of measurement and control technology; man-machine interface. Especially for thermal efficiency, thermal properties and chemical composition of inconel 690 tube, instead of inconel 600 tube, are measured for steam generator. (Author).

  3. Safety Bulletin 2014-2

    CERN Multimedia

    HSE Unit

    2014-01-01

    The HSE Unit would like to inform you that the Safety Bulletin 2014-2 entitled “False floors: real dangers” has just been released.     The Bulletin is available on EDMS under the following number: 1366385. We would like to remind you that HSE Safety Bulletins are published in English and French and incorporate feedback from incidents/near misses/accidents that have occurred on the CERN site, with the aim of improving prevention. We remain at your disposal in case you have further questions: safety.bulletin@cern.ch.

  4. A Study of KHNP Nuclear Power Plant Technology Level Evaluation

    International Nuclear Information System (INIS)

    Yang, Seung Han; Lee, Sung Jin; Kim, Yo Han

    2016-01-01

    KHNP's 2030 mid and long term plan goal in technology field is securing global No. 1 NPP technology level. Quantifying technology level for this purpose, technology level at present should be surveyed. Technology level of South Korea has been surveyed by KISTEP (Korea Institute of S and T Evaluation and Planning) every two year but the technology level of KHNP has not been surveyed by any organization including KHNP itself. Also the size of technology surveyed by KISTEP was too broad to quantifying technology level of KHNP. In this paper, technology level of KHNP and South Korea are presented. In this study, NPP related technologies were divided into Level I and Level II technologies and conducted a survey for each Level II technologies using Delphi questionnaire survey that is widely used in technology level evaluation. The results of technology level and gap will be used from strategic point of view and also as a reference data for technology improvement planning

  5. Technology Evaluation for Environmental Risk Mitigation Compendium

    Science.gov (United States)

    Meinhold, A.; Greene, B.; Dussich, J.; Sorkin, A.; Olsen, W.

    2017-01-01

    The Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center and its predecessor organization the Acquisition Pollution Prevention Program (AP2) supported the National Aeronautics and Space Administration (NASA) in identifying technology solutions to risks and costs to NASA programs driven by environmental regulations and requirements. TEERM researched the commercial and government marketplace to locate viable and available technologies that met NASAs needs. TEERM focused on addressing environmentally-driven risks of direct concern to NASA programs and facilities, including hazardous materials in NASA operations and materials that became obsolescent because of environmental regulations. TEERM projects aimed to reduce cost; ensure the health and safety of people, assets, and the environment; promote efficiency; and minimize duplication. Major TEERM and AP2 projects focused on waste minimization and hazardous waste treatment, recycling, corrosion prevention and control, solvent and ozone depleting substances substitution, and aqueous based cleaners. In 2017, NASA made the decision to terminate the TEERM Principal Center. This Compendium Report documents TEERM and AP2 project successes. The Compendium Report traces the evolution of TEERM based on evolving risks and requirements for NASA and its relationship to the Space Shuttle Program, the United States Department of Defense, the European Space Agency, and other public and private stakeholders. This Compendium Report also documents project details from Project Summaries and Joint Test Plans and describes project stakeholders and collaborative effort results.

  6. Evaluating Technology Resistance and Technology Satisfaction on Students' Performance

    Science.gov (United States)

    Norzaidi, Mohd Daud; Salwani, Mohamed Intan

    2009-01-01

    Purpose: Using the extended task-technology fit (TTF) model, this paper aims to examine technology resistance, technology satisfaction and internet usage on students' performance. Design/methodology/approach: The study was conducted at Universiti Teknologi MARA, Johor, Malaysia and questionnaires were distributed to 354 undergraduate students.…

  7. Evaluating technologies of oil spill surveillance

    International Nuclear Information System (INIS)

    Hover, G.L.

    1993-01-01

    Surveillance and monitoring of oil in the marine environment imposes a broad spectrum of remote sensing requirements. At the US Coast Guard Research ampersand Development Center, the environmental safety branch is sponsoring oil spill remote sensing research in four areas of technology: Synthetic aperture radar (SAR), Frequency-scanning microwave radiometry (FSR), Laser fluorosensing (LFS), and Forward-looking infrared (FLIR) imagers. SAR technology uses sophisticated signal processing to overcome prior limitations, providing images of higher and more uniform spatial acuity which may enable interpreters to more-readily distinguish petroleum slicks from others. The ability to determine the distribution of oil thickness within a slick is necessary when an estimate of oil volume is desired. Scientists at MIT have formulated a new approach to radiometric oil thickness measurement that takes advantage of recent advances in electronic component technology. The initial data collected with a prototype FSR instrument have validated the FSR concept and more work is ongoing. The Coast Guard is co-funding a program to demonstrate and evaluate the capabilities of an airborne laser fluorosensor to support oil spill response operations. During a controlled test, the instrument successfully demonstrated an ability to detect oil on water, ice, and various beach surfaces. Additional testing included different oil types and allowed for weathering. Data analysis is ongoing. Recent developments in infrared imager technology have produced a wide variety of off-the-shelf, portable cameras that could potentially provide a rapid-response spill assessment capability. The R ampersand D Center has been involved in the testing of many of these sensors

  8. bulletin Publication 2009

    CERN Multimedia

    DSU Unit

    2008-01-01

    The table below lists the 2009 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Publication date 3-4 Tuesday 6 January Monday 12 January 5-6 Tuesday 20 January Monday 26 January 7-8 Tuesday 3 February Monday 9 February 9-10 Tuesday 17 February Monday 23 February 11-12 Tuesday 3 March Monday 9 March 13-14 Tuesday 17 March Monday 23 March 15-16-17 (Easter issue) Tuesday 31 March Monday 6 April 18-19 Tuesday 21 April Monday 27 April 20-21 Tuesday 5 May Monday 11 May 22-23 Tuesday 19 May Monday 25 May 24-25 ...

  9. SET-MM – A Software Evaluation Technology Maturity Model

    OpenAIRE

    García-Castro, Raúl

    2011-01-01

    The application of software evaluation technologies in different research fields to verify and validate research is a key factor in the progressive evolution of those fields. Nowadays, however, to have a clear picture of the maturity of the technologies used in evaluations or to know which steps to follow in order to improve the maturity of such technologies is not easy. This paper describes a Software Evaluation Technology Maturity Model that can be used to assess software evaluation tech...

  10. Environmental guidance regulatory bulletin

    International Nuclear Information System (INIS)

    1997-01-01

    This document describes the background on expanding public participation in the Resource Conservation and Recovery Act and DOE's response. The bulletin also describes the changes made by the final rule to existing regulations, guidance provided by EPA in the preamble and in the revised RCRA Public Participation Manual, the relationship between public participation and environmental justice, and DOE's recent public participation and environmental justice initiatives

  11. International bulletin on atomic and molecular data for fusion. No. 47

    International Nuclear Information System (INIS)

    Botero, J.

    1993-12-01

    This bulletin, published by the IAEA, provides atomic and molecular data references relevant to fusion research and technology. In part I the indexation of the papers is provided separately for (i) structure and spectra, (ii) atomic and molecular collisions, and (iii) surface interactions. Part II contains the bibliographic data for the above-listed topics and for high-energy laser and beam-matter interaction of atomic particles with fields. Also included are sections on atomic and molecular data needs for fusion research and on news about ALADDIN (A Labelled Atomic Data INterface) and evaluated data bases

  12. Wisconsin Secondary Vocational Education: 1978-1982 Aggregate of Data. Evaluation Report, Cycle I. Bulletin No. 3266.

    Science.gov (United States)

    Wisconsin Univ. - Stout, Menomonie. Center for Vocational, Technical and Adult Education.

    The first five-year cycle of the Wisconsin Secondary Vocational Program Evaluation System was completed on December 31, 1982 to aid in planning and assessing vocational education in the state and to portray its impact at local, state and national levels. This aggregate report presents first phase data from high school self-evaluations. The second…

  13. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. M K Rabinal. Articles written in Bulletin of Materials Science. Volume 35 Issue 4 August 2012 pp 529-532. An optical tweezer-based study of antimicrobial activity of silver nanoparticles · Yogesha Sarbari Bhattacharya M K Rabinal Sharath Ananthamurthy · More Details Abstract ...

  14. IDRC Bulletin — Winter 2017

    International Development Research Centre (IDRC) Digital Library (Canada)

    2018-01-16

    Jan 16, 2018 ... In this issue, read the research results from our Safe and Inclusive Cities program and don't forget that the Joint Canada-Israel Health Research Program 2018 call is now open. IDRC Bulletin logo IDRC Bulletin — Winter 2017. Featured this month. View of Port-au-Prince in Haiti, March 30, 2016. Safe and ...

  15. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. DIPTI VAYA. Articles written in Bulletin of Materials Science. Volume 39 Issue 7 December 2016 pp 1735-1743. Photocatalytic degradation of Malachite Green dye by modified ZnO nanomaterial · S MEENA DIPTI VAYA B K DAS · More Details Abstract Fulltext PDF. In this article ...

  16. International Bulletin on Atomic and Molecular Data for Fusion. No. 28

    International Nuclear Information System (INIS)

    Hughes, J.G.

    1985-03-01

    The bulletin presents a selected bibliography (462 literature pieces) on atomic and molecular data relevant to fusion research and technology. It also gives a list of indexed papers, separately on structure and spectra, atomic and molecular collisions, and surface effects

  17. Development of inspection safety evaluation technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Seok Chul; Yoon, Yeo Chang; Kim, Jong Soo; Lee, Tae Young; Kim, Chang Ryol; Lee, Hyung Sub; Kim, Jong Soo

    1995-12-01

    The purpose of this project is to protection nation inspector`s over exposure from radiation that can be occurred by inspection activity at nuclear facilities and its environment, and to ensure the safety of inspection activity at the nuclear facilities. To effectively carry out the domestic inspection task to be enforced from 1996, the evaluation for special radiation exposure rate of nuclear facilities, air and surface contamination level, and measurement and monitoring of water contamination level were made to determine whether these measured values exceeded permissible limitations, and to protect the inspector`s over exposure from radiation at domestic nuclear facilities. Management of inspector`s exposure was carried out under assistance of the Department of Health Physics. Performance tests of two gamma detectors, one neutron detector, alpha and beta detector, and gamma spectroscopy analyzer were carried out to control dose on extremity, the characteristic test for extremity dosimeter was carried out and the theoretical calculation of gamma dose conversion factors based on ANSI N13.32 standard was performed. Under the 93+2 program, IAEA began to recognize the necessity of environmental observation technology development of air-borne particulates travelled from long distance location. Associated with the necessity of this technology development, a proposal of international joint research for development of the special radiation measurement and analysis has been prepared. (author). 21 tabs., 24 figs., 20 refs.

  18. A Method of Sharing Tacit Knowledge by a Bulletin Board Link to Video Scene and an Evaluation in the Field of Nursing Skill

    Science.gov (United States)

    Shimada, Satoshi; Azuma, Shouzou; Teranaka, Sayaka; Kojima, Akira; Majima, Yukie; Maekawa, Yasuko

    We developed the system that knowledge could be discovered and shared cooperatively in the organization based on the SECI model of knowledge management. This system realized three processes by the following method. (1)A video that expressed skill is segmented into a number of scenes according to its contents. Tacit knowledge is shared in each scene. (2)Tacit knowledge is extracted by bulletin board linked to each scene. (3)Knowledge is acquired by repeatedly viewing the video scene with the comment that shows the technical content to be practiced. We conducted experiments that the system was used by nurses working for general hospitals. Experimental results show that the nursing practical knack is able to be collected by utilizing bulletin board linked to video scene. Results of this study confirmed the possibility of expressing the tacit knowledge of nurses' empirical nursing skills sensitively with a clue of video images.

  19. Technology evaluation: SAGE, Genzyme molecular oncology.

    Science.gov (United States)

    Bartlett, J

    2001-02-01

    Genzyme Molecular Oncology (GMO) is using its SAGE (Serial Analysis of Gene Expression) combinatorial chemistry technology to screen compound libraries. SAGE is a high-throughput, high-efficiency method to simultaneously detect and measure the expression levels of genes expressed in a cell at a given time, including rare genes. SAGE can be used in a wide variety of applications to identify disease-related genes, to analyze the effect of drugs on tissues and to provide insights into disease pathways. It works by isolating short fragments of genetic information from the expressed genes that are present in the cell being studied. These short sequences, called SAGE tags, are linked together for efficient sequencing. The sequence data are then analyzed to identify each gene expressed in the cell and the levels at which each gene is expressed. This information forms a library that can be used to analyze the differences in gene expression between cells [293437]. By December 1999, GMO had identified a set of 40 genes from 3.5 million transcripts that were expressed at elevated levels in all cancer tissue but not seen in normal tissue. The company hope these may provide diagnostic markers or therapeutic targets. The studies also provided data furthering the understanding of the way cells use their genome [349968]. GMO has signed a collaborative agreement with the National Cancer Institute (NCI) to search for new drug candidates in the field of cancer chemotherapy. The collaboration combines GMO's SAGE technology with the NCI's extensive array of 60 cell-based cancer screens. Under the agreement, the NCI will evaluate Genzyme's library consisting of one million compounds against selected cancer screens to identify compounds with anticancer properties [255082]. Xenometrix granted a license agreement for gene expression profiling to GMO in February 1999, giving company access to claims covered in issued US and European patents. The license is non-exclusive and covers the

  20. Power Transformers: Technical Terminology Bulletin. Terminotech, Vol.2, No. 6.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to power transformers. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  1. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 31; Issue 3. Formation of InN nanoparticle and nanorod structures by nitrogen plasma annealing method ... Department of Physics, Indian Institute of Technology Delhi, New Delhi 110 016, India; Material Science Division, Indira Gandhi Centre for Atomic Research, ...

  2. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 33; Issue 1. Dispersion and reinforcing mechanism of carbon nanotubes in epoxy nanocomposites. Smrutisikha Bal ... Author Affiliations. Smrutisikha Bal1. Department of Metallurgical and Materials Engineering, National Institute of Technology, Rourkela 769 008, India ...

  3. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 35; Issue 2. Removal ... Mixtures of poly(ethylene terephthalate) and magnesium carbonate at different weight ratios were heated up to 850°C in argon atmosphere. ... Institute of Chemical and Environmental Engineering, West Pomeranian University of Technology, ul.

  4. Iron Metallurgy: Technical Terminology Bulletin. Terminotech, Vol. 2, No. 7.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to iron metallurgy. Various aspects of iron production are described in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  5. ECONOMIC EVALUATION OF CO2 SEQUESTRATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Bert R. Bock; Richard G. Rhudy; David E. Nichols

    2001-07-01

    In order to plan for potential CO{sub 2} mitigation mandates, utilities need better information on CO{sub 2} mitigation options, especially carbon sequestration options that involve non-utility operations. One of the major difficulties in evaluating CO{sub 2} sequestration technologies and practices, both geologic storage of captured CO{sub 2} and storage in biological sinks, is obtaining consistent, transparent, accurate, and comparable economics. This project is comparing the economics of major technologies and practices under development for CO{sub 2} sequestration, including captured CO{sub 2} storage options such as active oil reservoirs, depleted oil and gas reservoirs, deep aquifers, coal beds, and oceans, as well as the enhancement of biological sinks such as forests and croplands. An international group of experts has been assembled to compare on a consistent basis the economics of this diverse array of CO{sub 2} sequestration options. Designs and data collection are nearly complete for each of the CO{sub 2} sequestration options being compared. Initial spreadsheet development has begun on concepts involving storage of captured CO{sub 2}. No significant problems have been encountered, but some additional outside expertise will be accessed to supplement the team's expertise in the areas of life cycle analysis, oil and gas exploration and production, and comparing CO{sub 2} sequestration options that differ in timing and permanence of CO{sub 2} sequestration. Plans for the next reporting period are to complete data collection and a first approximation of the spreadsheet. We expect to complete this project on time and on budget.

  6. An Evaluation of Enhanced Geothermal Systems Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jelacic, Allan [U.S. Dept. of Energy, Washington, DC (United States); Fortuna, Raymond [U.S. Dept. of Energy, Washington, DC (United States); LaSala, Raymond [U.S. Dept. of Energy, Washington, DC (United States); Nathwani, Jay [U.S. Dept. of Energy, Washington, DC (United States); Nix, Gerald [U.S. Dept. of Energy, Washington, DC (United States); Visser, Charles [National Renewable Energy Lab. (NREL), Golden, CO (United States); Green, Bruce [National Renewable Energy Lab. (NREL), Golden, CO (United States); Renner, Joel [Idaho National Lab. (INL), Idaho Falls, ID (United States); Blankenship, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennedy, Mack [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bruton, Carol [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2008-04-01

    This 2008 document presents the results of an eight-month study by the Department of Energy (DOE) and its support staff at the national laboratories concerning the technological requirements to commercialize a new geothermal technology, Enhanced Geothermal Systems (EGS).

  7. REMEDIATION TECHNOLOGY EVALUATION AT THE GILT EDGE MINE, SOUTH DAKOTA

    Science.gov (United States)

    This document reports the findings of the Mine Waste Technology Program's Activity III, Project 29,The Remediation Technology Evaluation Project at the Gilt Edge Mine, S.D. This project consisted of evaluating three emerging acidic waste rock stabilization technologies and compar...

  8. Evaluation of Smart Gun Technologies preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1996-01-01

    The Smart Gun Technology Project has a goal to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing {open_quote}smart{close_quote} technologies. Smart technologies are those that can in some manner identify an officer. This report will identify, describe, and grade various technologies as compared to the requirements that were obtained from officers. This report does not make a final recommendation for a smart gun technology, nor does it give the complete design of a smart gun system.

  9. Safety Bulletin 2014-1

    CERN Multimedia

    HSE Unit

    2014-01-01

    The HSE Unit would like to inform you that Safety Bulletin 2014-1 entitled “Call for help!” has just been released.   The Bulletin is available on EDMS under the following number: 1346313. We would like to remind you that HSE Safety Bulletins are published in English and French, and incorporate feedback from incidents/near misses/accidents that have occurred on the CERN site with the aim of improving prevention. We remain at your disposal in case you have further questions.

  10. Assistive Technology for Persons with Physical Disabilities: Evaluation and Outcomes

    NARCIS (Netherlands)

    Rigby, P.J.

    2009-01-01

    This thesis presents a compilation of published studies that evaluated assistive technology interventions for children and adults with physical disabilities. The first chapter introduces the need for and the challenges involved in studying the outcomes of assistive technology interventions. The

  11. INNOVATIVE TECHNOLOGY EVALUATION REPORT: RADIO FREQUENCY HEATING, KAI TECHNOLOGIES, INC.

    Science.gov (United States)

    A demonstration of KAI Technologies in-situ radio frequency heating system for soil treatment was conducted from January 1994 to July 1994 at Kelly Air Force Base in San Antonio, Texas. This demonstration was conducted as a joint effort between the USEPA and the USAF. The technol...

  12. IITRI RADIO FREQUENCY HEATING TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    IITRI's patented in situ RFH technology enhances the removal of volatile and semi-volatile organics by soil vapor extraction (SVE). Electromagnetic energy heats the soil resulting in increased contaminant vapor pressures and potentially higher soil permeability. RFH heats soil us...

  13. MATRIX PHOTOCATALYTIC, INC. PHOTOCATALYTIC OXIDATION TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Matrix Technology involves the exposure of titanium dioxide (Ti02) particles to ultraviolet light (UV). The Ti02 is activated by UV light to produce high oxidizing hydroxyl radicals. Maxtrix also uses hydrogen peroxide (H202) and ozone (03) to enhance the treatment systems p...

  14. Java Bluetooth wireless technology for evaluating student performance in classroom

    OpenAIRE

    Davidrajuh, Reggie

    2005-01-01

    This paper focuses on the use of Java Bluetooth wireless technology for evaluation of student performance in classroom. First, an introduction to Bluetooth wireless technology is given. Second, use of Java technology for developing wireless applications is explored. Third, a framework is given for identifying the processes involved in education that can make use of mobile technology. Finally, a case study is presented on wireless classroom application for student evaluation.

  15. SAFETY BULLETIN 2002-02

    CERN Multimedia

    TIS Secretariat

    2002-01-01

    Please note that the Safety Bulletin 2002-02 entitled "PRESSURIZED GAS CYLINDERS - DANGER!" is available on the EDMS. Paper copies can also be obtained from the TIS Divisional Secretariat, email: tis.secretariat@cern.ch. TIS Secretariat

  16. Bulletin of International Simultaneous Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The publication of the Bulletin of International Simultaneous Observations, began July 1, 1875, with daily maps added in 1877. It was published for distribution...

  17. Evaluation of automated vehicle technology for transit.

    Science.gov (United States)

    2015-01-01

    The purpose of this report is to provide an overview of the state of automated vehicle (AV) technology : in transit. The Florida Department of Transportation (FDOT) wishes to know what AV technology is : currently available that could be used in tran...

  18. Performance Evaluation of Hyper Threading Technology ...

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    2015-12-01

    Dec 1, 2015 ... This paper describes the Hyper-Threading Technology architecture, and discusses the micro architecture details of Intel's structure. Hyper-Threading Technology is an important addition to. Intel's enterprise product line and has been integrated into a wide variety of products. Intel provides Hyper-Threading ...

  19. More changes to the Bulletin

    CERN Multimedia

    DSU Department

    2006-01-01

    The transformation of the Bulletin that began last year is continuing. As you will see in the next edition, the CERN Bulletin and the pages of the Staff Association have now become two separate publications. Their contents have always been independent of each other but the physical separation of the two will make this absolutely clear. This change will be followed by the introduction of a more modern layout and new distribution arrangements in the coming weeks. Happy reading! DSU Department

  20. Mars in Situ Resource Utilization Technology Evaluation

    Science.gov (United States)

    Muscatello, Anthony C.; Santago-Maldonado, Edgardo

    2012-01-01

    We have examined the technologies required to enable Mars In-Situ Resource Utilization (ISRU) because our understanding of Mars resources has changed significantly in the last five years as a result of recent robotic missions to the red planet. Two major developments, (1) confirmation of the presence of near-surface water in the form of ice in very large amounts at high latitudes by the Phoenix Lander and (2) the likely existence of water at lower latitudes in the form of hydrates or ice in the top one meter of the regolith, have the potential to change ISRU technology selection. A brief technology assessment was performed for the most promising Mars atmospheric gas processing techniques: Reverse Water Gas Shift (RWGS) and Methanation (aka Sabatier), as well as an overview of soil processing technology to extract water from Martian soil.

  1. WPC's Short Range Forecast Coded Bulletin

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Short Range Forecast Coded Bulletin. The Short Range Forecast Coded Bulletin describes the expected locations of high and low pressure centers, surface frontal...

  2. Quantitative evaluation of nonablative laser technology.

    Science.gov (United States)

    Friedman, Paul M; Skover, Greg R; Payonk, Greg; Geronemus, Roy G

    2002-12-01

    analyzed and compared including the right and left cheek and the right and left forehead. Measurements were taken at baseline and then at 1-, 3- and 6-month follow-up visits. Skin roughness decreased 11% from baseline in the patient with photodamaged skin, while the patients with acne scarring showed a 33% improvement from baseline after 3 treatment sessions. Six-months after the fifth treatment session, a 26% improvement in skin smoothness was documented in the patients with photodamaged skin, while a 61% improvement was recorded in the subject with acne scarring. Biomechanical analysis of the skin showed a 23% decrease in skin stiffness and a 30% increase in skin compliance at the 6-month follow-up in the patients with photodamage. Alternatively, the patient with acne scarring showed a 50% increase in skin stiffness, and a 30% decrease in skin compliance at the 6-month follow-up. Three-dimensional in vivo optical skin imaging provided a rapid and quantitative assessment of surface topography and facial fine lines after multiple treatment sessions with a 1064-nm QS Nd:YAG laser, correlating with clinical and subjective responses. Biomechanical analysis provided technical understanding of structural changes in photodamaged skin and acne scarring following nonablative laser treatment. Future applications of these devices may include comparison of nonablative laser technology, optimization of treatment regimens, and objective evaluation of other aesthetic procedures performed by dermatologists.

  3. Analysis and evaluation of the applicability of green energy technology

    Science.gov (United States)

    Xu, Z. J.; Song, Y. K.

    2017-11-01

    With the seriousness of environmental issues and the shortage of resources, the applicability of green energy technology has been paid more and more attention by scholars in different fields. However, the current researches are often single in perspective and simple in method. According to the Theory of Applicable Technology, this paper analyzes and defines the green energy technology and its applicability from the all-around perspectives of symbiosis of economy, society, environment and science & technology etc., and correspondingly constructs the evaluation index system. The paper further applies the Fuzzy Comprehensive Evaluation to the evaluation of its applicability, discusses in depth the evaluation models and methods, and explains in detail with an example. The author holds that the applicability of green energy technology involves many aspects of economy, society, environment and science & technology and can be evaluated comprehensively by an index system composed of a number of independent indexes. The evaluation is multi-object, multi-factor, multi-level and fuzzy comprehensive, which is undoubtedly correct, effective and feasible by the Fuzzy Comprehensive Evaluation. It is of vital theoretical and practical significance to understand and evaluate comprehensively the applicability of green energy technology for the rational development and utilization of green energy technology and for the better promotion of sustainable development of human and nature.

  4. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 24; Issue 4. Evaluation of solid–liquid interface profile during continuous casting by a spline based formalism. S K Das. Metals and Alloys Volume ... Keywords. Continuous casting; solidification; solid–liquid interface; front tracking algorithm; phase change; heat transfer.

  5. Weapons of Mass Destruction Technology Evaluation and Training Range

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Larry Young

    2009-05-01

    The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

  6. SANDIA NATIONAL LABORATORIES IN SITU ELECTROKINETIC EXTRACTION TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As a part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated the In-Situ Electrokinetic Extraction (ISEE) system at Sandia National Laboratories, Albuquerque, New Mexico.The SITE demonstration results show ...

  7. Novel energy saving technologies evaluation tool

    NARCIS (Netherlands)

    Klemeš, J.; Bulatov, I.; Koppejan, J.

    2009-01-01

    The lead-time for the development of a new energy technology, from the initial idea to the commercial application, can take many years. The reduction of this time has been the main objective of the EC DGTREN, who have funded two related recent projects, EMINENT and EMINENT2 (Early Market

  8. Biometric systems technology, design and performance evaluation

    CERN Document Server

    Wayman, James; Maltoni, Davide

    2005-01-01

    A reference book for anyone involved in the design, management or implementation of biometric systems, and provides all the information needed to a build reliable system. It focuses on the four most widely used types of biometric technology - speech, fingerprint, iris and face recognition.

  9. Assessment and evaluation of technologies for environmental restoration. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Uzochukwu, G. A. [North Carolina A and T State Univ., Greensboro, NC (United States)

    2000-06-30

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  10. Assessment and evaluation of technologies for environmental restoration. Progress report

    International Nuclear Information System (INIS)

    Uzochukwu, G. A.

    2000-01-01

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  11. Assessment and evaluation of technologies for environmental restoration. Progress report

    International Nuclear Information System (INIS)

    Uzochukwu, G.A.

    1999-01-01

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites

  12. Assessment and evaluation of technologies for environmental restoration. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Uzochukwu, G.A.

    1999-01-15

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  13. Technology Validation: Fuel Cell Bus Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, Leslie [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-01-02

    This presentation describing the FY 2016 accomplishments for the National Renewable Energy Laboratory's Fuel Cell Bus Evaluations project was presented at the U.S. Department of Energy Hydrogen and Fuel Cells Program Annual Merit Review and Peer Evaluation Meeting, June 7, 2016.

  14. Students’ Perception on Teaching Practicum Evaluation using Video Technology

    Science.gov (United States)

    Chee Sern, Lai; ‘Ain Helan Nor, Nurul; Foong, Lee Ming; Hassan, Razali

    2017-08-01

    Video technology has been widely used in education especially in teaching and learning. However, the use of video technology for evaluation purpose especially in teaching practicum is extremely scarce and the benefits of video technology in teaching practicum evaluation have not yet been fully discovered. For that reason, this quantitative research aimed at identifying the perceptions of trainee teachers towards teaching practicum evaluation via video technology. A total of 260 students of Teacher Certification Programme (Program Pensiswazahan Guru - PPG) from the Faculty of Technical and Vocational Education (FPTV) of Universiti Tun Hussein Onn Malaysia (UTHM) had been randomly selected as respondents. A set of questionnaire was developed to assess the suitability, effectiveness and satisfaction of using video technology for teaching practicum. Conclusively, this research showed that the trainee teachers have positive perceptions in all three aspects related teaching practicum evaluation using video technology. Apart from that, no significant racial difference was found in the measured aspects. In addition, the trainee teachers also showed an understanding of the vast importance of teaching practicum evaluation via video. These research findings suggest that video technology can be a feasible and practical means of teaching practicum evaluation especially for distance learning program.

  15. Informal Evaluation and Institutionalization of Neoteric Technology Ideas

    DEFF Research Database (Denmark)

    Ulrich, Frank; Mengiste, Shegaw Anagaw; Mûller, Sune Dueholm

    2015-01-01

    institutionalized technologies during their informal evaluation and sensemaking of these ideas. Moreover, we suggest that conflicts between competing frames of reference during this evaluation may result in the rejection, adoption, or multiplication of new technology ideas. Drawing on Information Systems (IS) based......This article explores the complex process of how ideas evolve in organizations that are engaged in developing and using information technology (IT) based systems. We put forward a framework emphasizing the interconnection between creativity and institutionalization. We argue that ideas are embedded...... in existing institutionalized technologies within the organization and that emerging technologies introduce neoteric ideas to the organization. Furthermore, we argue that when attempting to introduce technology-based ideas, human actors will focus their attention on ideas embedded in existing...

  16. Evaluation across Contexts: Evaluating the Impact of Technology Integration Professional Development Partnerships

    Science.gov (United States)

    Smolin, Louanne; Lawless, Kimberly A.

    2011-01-01

    Professional development is a necessary component for effectively integrating technology into classrooms. Unfortunately, the evaluation of technology integration professional development (TIPD) rarely moves beyond participation satisfaction surveys, nor does it reflect the concerns of the multiple stakeholders participating in technology…

  17. Panel 1 - comparative evaluation of deposition technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, G.R.; Stodolsky, F. [Argonne National Lab., IL (United States); Benson, D.K.; Pitts, R.J. [National Renewable Energy Lab., Golden, CO (United States); Bhat, D.G. [GTE Valenite Corp., Troy, MI (United States); Yulin Chen [Allison Gas Turbine Division, GM, Indianapolis, IN (United States); Gat, R.; Sunkara, M.K. [Case Western Reserve Univ., Cleveland, OH (United States); Kelly, M. [Stanford Univ., CA (United States); Lawler, J.E. [Univ. of Wisconsin, Madison (United States); Nagle, D.C. [Martin Marietta Labs., Baltimore, MD (United States); Outka, D. [Sandia National Laboratories, Livermore, CA (United States); Revankar, G.S. [Deere & Co., Moline, IL (United States); Subramaniam, V.V. [Ohio State Univ., Columbus (United States); Wilbur, P.J. [Colorado State Univ., Fort Collins (United States); Mingshow Wong [Northwestern Univ., Evanston, IL (United States); Woolam, W.E. [Southwest Research Inst., Arlington, VA (United States)

    1993-01-01

    This working group attempted to evaluate/compare the different types of deposition techniques currently under investigation for depositing diamond and diamond-like carbon films. A table lists the broad types of techniques that were considered for depositing diamond and diamond-like carbon films. After some discussion, it was agreed that any evaluation of the various techniques would be dependent on the end application. Thus the next action was to list the different areas where diamond and DLC films could find applications in transportation. These application areas are listed in a table. The table intentionally does not go into great detail on applications because that subject is dealt with specifically by Panel No. 4 - Applications To Transportation. The next action concentrated on identifying critical issues or limitations that need to be considered in evaluating the different processes. An attempt was then made to rank different broad categories of deposition techniques currently available or under development based on the four application areas and the limitations. These rankings/evaluations are given for diamond and DLC techniques. Finally, the working group tried to identify critical development and research issues that need to be incorporated into developing a long-term program that focuses on diamond/DLC coatings for transportation needs. 5 tabs.

  18. Evaluation of selected sewage sludge gasification technological parameters

    Science.gov (United States)

    Gałko, Grzegorz; Król, Danuta

    2018-02-01

    Evaluation of selected sewage sludge gasification technological parameters was shown in this paper. Degree of carbon conducted in combustible substance and syngas efficiency (technological readiness coefficient) in accordance with equations were calculated. Enthalpy of individual compounds formation and energy balance were calculated in accordance with rule of Hess.

  19. SITE CHARACTERIZATION ANALYSIS PENETROMETER SYSTEM (SCAPS) - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    In August 1994, a demonstration of cone penetrometer-mounted sensor technologies took place to evaluate their effectiveness in sampling and analyzing the physical and chemical characteristics of subsurface sod at hazardous waste sites. he effectiveness of each technology was eval...

  20. Bulletin 2 PDA : diploma project

    CERN Document Server

    Stankowski, D; Wagen, J F; Pettenati, Corrado; Le Meur, Jean-Yves; Faggian, R; Vanoirbeek, C

    2002-01-01

    The aim of the project "Bulletin 2 PDA" is to develop an information system, which provides the CERN eBulletin on mobile devices. The main goal is to connect different database outputs, to convert this data into personalized content and then to output it in an appropriate format depending on the connected device. The following paper describes the establishment of the diploma work which is in the context of collaboration with the University of Applied Sciences of Fribourg and the European Organization of Nuclear Research Geneva.

  1. More changes to the Bulletin

    CERN Multimedia

    2006-01-01

    The transformation of the Bulletin that began last year is continuing. As you will see in this issue, the CERN Bulletin and the pages of the Staff Association have now become two separate publications. The same has been done for the Web site and the electronic alert. Their contents have always been independent of each other but the physical separation of the two will make this absolutely clear. This change will be followed by the introduction of a more modern layout and new distribution arrangements in the coming weeks. Happy reading!

  2. Methods in artificial insemination technology and fertility evaluation in poultry

    Science.gov (United States)

    The symposium will include an in-depth review and hands-on demonstrations of selected methodologies in AI technology and fertility evaluation. The symposium is geared for commercial farm and hatchery technical staffs and research lab personnel....

  3. Prototype-Technology Evaluator and Research Aircraft, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The Area-I team has developed and flight tested the unmanned Prototype-Technology Evaluation and Research Aircraft or PTERA ("ptera" being Greek for wing, or...

  4. EVALUATION OF CURRENT SUSTAINABILITY ASSESSMENT OF BIOBASED TECHNOLOGY

    Science.gov (United States)

    Sustainable technology is driven by economic competitiveness, government policies and public pressure. The claim of inherent cleanliness for biotechnology is too simplistic. Each application of biotechnology must be evaluated for suitable characteristics of sustainability. The ...

  5. Technological and economic evaluation of the oxidizer for vanadium

    International Nuclear Information System (INIS)

    Cherkashin, V.I.; Denisova, L.V.; Sklyar, A.V.; Khlopkov, L.P.

    1978-01-01

    Vanadium oxidizers, applied to processing vanadium-containing scrap resulted from titanium production are characterized and evaluated according to their technological properties and economic expenses. Advantages of potassium perchlorate, ammonium persulphate, and pyrolusite over sodium and calcium hypochlorites are shown

  6. Light detection and ranging (LiDAR) technology evaluation.

    Science.gov (United States)

    2010-10-01

    Evaluation project was undertaken to provide an analysis on the current state of Laser based technology and its applicability, : potential accuracies and information content with respect to Missouri Department of Transportation( MODOT) applications.

  7. Review and evaluation of alternative chemical disposal technologies

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

    .... In light of the fact that alternative technologies have evolved since the 1994 study, this new volume evaluates five Army-chosen alternatives to the baseline incineration system for the disposal...

  8. Status report on energy recovery from municipal solid waste: technologies, lessons and issues. Information bulletin of the energy task force of the urban consortium

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-01-01

    A review is presented of the lessons learned and issues raised regarding the recovery of energy from solid wastes. The review focuses on technologies and issues significant to currently operating energy recovery systems in the US - waterwall incineration, modular incineration, refuse derived fuels systems, landfill gas recovery systems. Chapters are: Energy Recovery and Solid Waste Disposal; Energy Recovery Systems; Lessons in Energy Recovery; Issues in Energy Recovery. Some basic conclusions are presented concerning the state of the art of energy from waste. Plants in shakedown or under construction, along with technologies in the development stages, are briefly described. Sources of additional information and a bibliography are included. (MCW)

  9. Evaluation of New European Technologies for Future Avionics

    Science.gov (United States)

    Poupat, Jean-Luc; Chevalier, Laurent; Monchaux, David; Le Meur, Patrick

    2014-08-01

    With the support of CNES DLA as operator, and Airbus DS Space System as architect, Airbus DS Electronics in Elancourt has developed a modular platform to evaluate new technologies for future avionics.This paper presents the Avionic-X project that has initiated this development, the modular platform itself and the status on this activity performed on this evaluation platform which has allowed the use of European technologies such as ARM processing cores or TTEthernet communication bus.

  10. Comparative evaluation of CVD diamond technologies

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, T.R. [General Electric Corporate Research & Development Center, Schenectady, NY (United States)

    1993-01-01

    Chemical vapor deposition (CVD) of diamonds occurs from hydrogen-hydrocarbon gas mixtures in the presence of atomic hydrogen at subatmospheric pressures. Most CVD methods are based on different means of generating and transporting atomic hydrogen in a particular system. Evaluation of these different techniques involves their capital costs, material costs, energy costs, labor costs and the type and quality of diamond that they produce. Currently, there is no universal agreement on which is the best technique and technique selection has been largely driven by the professional background of the user as well as the particular application of interest. This article discusses the criteria for evaluating a process for low-pressure deposition of diamond. Next, a brief history of low-pressure diamond synthesis is reviewed. Several specific processes are addressed, including the hot filament process, hot filament electron-assisted chemical vapor deposition, and plasma generation of atomic hydrogen by glow discharge, microwave discharge, low pressure radio frequency discharge, high pressure DC discharge, high pressure microwave discharge jets, high pressure RF discharge, and high and low pressure flames. Other types of diamond deposition methods are also evaluated. 101 refs., 15 figs.

  11. Evaluation of air cleaning technologies existing in the Danish market

    DEFF Research Database (Denmark)

    Ardkapan, Siamak Rahimi; Afshari, Alireza; Bergsøe, Niels Christian

    2014-01-01

    Five portable air cleaning technologies including one new technology were evaluated to find their effectiveness in removing ultrafine particles. Measurements were carried out both in a duct and in a test room. The results showed that the technologies that use/create ozone to clean air can increase...... the ozone level significantly in the room. Moreover, they can cause generation of ultrafine particles and consequently increase ultrafine particle concentration in the room. The study suggests using a mechanical filter with low pressure drop as a recommended air cleaning technology in order to remove...

  12. International bulletin on atomic and molecular data for fusion. No. 49

    International Nuclear Information System (INIS)

    Botero, J.

    1995-06-01

    This issue of the bulletin provides atomic and molecular data references relevant to fusion research and technology. In part 1 the indexation of the papers is provided separately for (i) structure and spectra, (ii) atomic and molecular collisions, and (iii) surface interactions. Part 2 contains the bibliographic data for the above-listed topics and brief bibliographic lists for the following topics: (a) fusion research of general interest, (b) high energy laser- and beam-matter interaction, (c) bibliographic and numerical data collections, and (d) interaction of atomic particles with fields. Moreover, the creation of the Atomic and Molecular Data Information System (AMDIS) is announced by the IAEA. AMDIS contains three main parts: the Atomic and Molecular Bibliographic Data System (AMBDAS), the numerical database of recommended and evaluated atomic, molecular and plasma-surface interaction data ALADDIN and an electronic bulletin board with information regarding data needs, meetings and programs of the IAEA Atomic and Molecular Data Unit. AMDIS may be reached via INTERNET. For information on how to access AMDIS, an electronic mail inquiry can be sent (address: ''pms'' followed by the usual ''at'' symbol followed by ''ripcrs01.iaea.or.at'')

  13. NDE [nondestructive evaluation] of the interiors of components: Technology evaluation

    International Nuclear Information System (INIS)

    Goldberg, L.O.

    1990-01-01

    Sea Test Services (STS) is investigating the need for and feasibility of integrating robotic and advanced NDE technology for inspecting nuclear power plants from their interiors. This project covers Phase I of a two-phase program. Phase I concentrates on identifying currently available robotic NDE systems that are readily amenable to integration. Tasks are identified as follows: identify the needs of utilities for interior inspections; document current practices in the nuclear industry and in technology transfer from other industries that require internal robotic NDE; determine the limits of sensitivity that can be expected of an integrated robotic-NDE system; and investigate remote visual inspection relative to determining system sensitivity and provide industry with guidelines for remote visual inspection. Primary focus has been on NDE integration for underwater remote-operated vehicles (UROVs) and pipe crawlers and on manipulators for use on UROVs and pipe crawlers. A limited investigation has been made on remote-operated devices such as the programmable and remote (PaR) tool. This study will disseminate to nuclear utilities information that should assist in making decisions on the use of integrated robotic-NDE systems

  14. Annual bulletin of market 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This bulletin deals with the brazilian electric power consumption in 1990 containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C)

  15. Annual bulletin of market 1989

    International Nuclear Information System (INIS)

    1989-01-01

    This bulletin deals with the brazilian electric power consumption in 1989 containing data about the total consumption, the growth rates, the special tariffs, and the monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C)

  16. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 2. Issue front cover thumbnail. Volume 39, Issue 2. April 2016, pages 337-601. pp 337-343. Cellulose acetate electrospun nanofibrous membrane: fabrication, characterization, drug loading and antibacterial properties · NAZNIN SULTANA ANISAH ZAINAL.

  17. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 38; Issue 6 ... Influences of protective atmosphere on the characterization and properties of NaSr2Nb5O15 lead-free piezoelectric ceramics by sol–gel method ... A 1 V supercapacitor device with nanostructured graphene oxide/polyaniline composite materials.

  18. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 26; Issue 5. Issue front cover thumbnail. Volume 26, Issue 5. August 2003, pages 461-568. pp 461-464 Sensor Materials. Preparation, characterization and dielectric behaviour of some yttrium doped strontium stannates · P K Bajpai Kuldeep Ratre Mukul Pastor T P ...

  19. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 38; Issue 2. Issue front cover thumbnail. Volume 38, Issue 2. April 2015, pages 283-582. pp 283-290. Enhanced thermo-mechanical performance and strain-induced band gap reduction of TiO2@PVC nanocomposite films · Mudassir Hasan Arghya Narayan Banerjee ...

  20. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 4. Issue front cover thumbnail. Volume 39, Issue 4. August 2016, pages 913-1138. pp 913-924. Characterization of microstructure and properties of Al–Al 3 Zr–Al 2 O 3 composite · ANUP MANDAL KARABI DAS SIDDHARTHA DAS · More Details Abstract ...

  1. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 36; Issue 1. Issue front cover thumbnail. Volume 36, Issue 1. February 2013, pages 1-182. pp 1-7. Carbon nanotubes purification constrains due to large Fe–Ni/Al2O3 catalyst particles encapsulation · Goran Boskovic Sanja Ratkovic Erne Kiss Olga Geszti · More Details ...

  2. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 23; Issue 5. Issue front cover thumbnail. Volume 23, Issue 5. October 2000, pages 341-452. pp 341-344 Synthesis. Preparation of Pt–Ru bimetallic catalyst supported on carbon nanotubes · B Rajesh K Ravindranathan Thampi J -M Bonard B Viswanathan · More Details ...

  3. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 26; Issue 3. Issue front cover thumbnail. Volume 26, Issue 3. April 2003, pages 279-364. pp 279-281 Synthesis. An improved process for the synthesis of VPI-5 molecular sieve · N Venkatathri · More Details Abstract Fulltext PDF. VPI-5 was synthesized with lesser time ...

  4. Bulletin publication schedule for 2013

    CERN Multimedia

    DG Unit

    2012-01-01

    The table below lists the 2013 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 noon on Tuesdays at the latest.   Bulletin No. Week number Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Printed version 4-5   Tuesday 15 January Fridays 18 and 25 January Wednesday 23 January 6-7   Tuesday 29 January Fridays 1 and 8 February Wednesday 6 February 8-9 Tuesday 12 February Fridays 15 and 22 february Wednesday 20 February 10-11 Tuesday 26 February Fridays 1 and 8 March Wednesday 6 March 12-13-14 Tuesday 12 March Fridays 15, 22 and 29 March Wednesday 20 March 15-16 Tuesday 2 April Fridays 5 and 12 April Wednesday 10 April 17-18 Tuesday 16 April Fridays 19 and 26 April Wednesday 24 April 19-20 Tuesday 30 April Fridays 3 and 10 May Thursday 8 May 21-22 Tuesday 14 M...

  5. Bulletin publication schedule for 2012

    CERN Multimedia

    DG Unit

    2011-01-01

    The table below lists the 2012 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 noon on Tuesdays at the latest.   Bulletin No. Week number Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Printed version 4-5   Tuesday 17 January Fridays 20 and 27 January Wednesday25 January 6-7   Tuesday 31 January Fridays 3 and 10 February Wednesday 8 February 8-9 Tuesday 14 February Fridays 17 and 24 february Wednesday 22 February 10-11 Tuesday 28 February Fridays 2 and 9 March Wednesday 7 March 12-13 Tuesday 13 March Fridays 16 and 23 March Wednesday 21 March 14-15 Tuesday 27 March Friday 30 March and Thursday 5 April Wednesday 4 April 16-17 Tuesday 10 April Fridays 13 and 20 April Wednesday 18 April 18-19 Tuesday 24 April Fridays 27 April and 4 May Thursday 3 May 20-21 ...

  6. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 37; Issue 3. Issue front cover thumbnail. Volume 37, Issue 3. May 2014, pages 371-741. pp 371-381. Studies on interfacial interactions of TiO2 nanoparticles with bacterial cells under light and dark conditions · Swayamprava Dalai Sunandan Pakrashi Sujay Chakravarty ...

  7. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 36; Issue 5. Issue front cover thumbnail. Volume 36, Issue 5. October 2013, pages 765-943. pp 765-770. Morphological evolution in single-crystalline Bi2Te3 nanoparticles, nanosheets and nanotubes with different synthesis temperatures · Punita Srivastava Kedar ...

  8. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 35; Issue 2. Issue front cover thumbnail. Volume 35, Issue 2. April 2012, pages 129-290. pp 129-136. Development and characterization of new phosphorus based flame retardant tetraglycidyl epoxy nanocomposites for aerospace application · K Shree Meenakshi E ...

  9. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 27; Issue 1. Issue front cover thumbnail. Volume 27, Issue 1. February 2004, pages 1-84. pp 1-17 Review--Ionic Conductros. Theoretical approaches to superionic conductivity · C S Sunandana P Senthil Kumar · More Details Abstract Fulltext PDF. Recent theoretical ...

  10. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 36; Issue 3. Issue front cover thumbnail. Volume 36, Issue 3. June 2013, pages 345-504. pp 345-351. Exploring a novel approach to fabricate vanadium carbide encapsulated into carbon nanotube (VC@C) with large specific surface area · Yifu Zhang Juecheng Zhang ...

  11. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 35; Issue 6. Issue front cover ... pp 925-931. Surface modified Al2O3 in fluorinated polyimide/Al2O3 nanocomposites: Synthesis and characterization .... Studies on electrical conductivity and dielectric behaviour of PVdF–HFP–PMMA–NaI polymer blend electrolyte.

  12. Proyecto Leer Bulletin, Number 8.

    Science.gov (United States)

    Benson, Susan Shattuck

    This bulletin lists educational materials for the Spanish speaking. Several hundred documents are listed in three main sections: (1) organizations, programs, laws, and news related to the Spanish speaking; (2) a list of books selected; and (3) a list of publishers and distributors with their addresses. Several bibliographies are included. Entries…

  13. Proyecto Leer Bulletin, Number 11.

    Science.gov (United States)

    Tome, Martha V., Ed.

    Educational materials for students of Spanish and the Spanish speaking are listed in this bulletin. A general information section lists reference materials on bilingual children, the blind and physically handicapped, comics, consumer education, employment, health, heritage of the Spanish speaking, Mexican American biography, Mexican American film…

  14. Proyecto Leer Bulletin, Number 9.

    Science.gov (United States)

    Benson, Susan Shattuck

    This bulletin lists addresses of publishers and distributors of audiovisual instructional materials in Spanish in the United States and Latin America. Sources are listed in four categories: (1) federal sources of materials, information on materials, names of resource people, programs, and proposal guidelines concerning the Spanish speaking; (2)…

  15. Proyecto Leer Bulletin, Number 12.

    Science.gov (United States)

    Tome, Martha V., Ed.

    This bulletin is designed to serve the Spanish-speaking population of the United States. This issue contains a list of popular magazines in Spanish for children and adults. Another section provides the names of comics for children. Titles to be found under "Publications in Series and Collections" are the popular type of romantic, western, or…

  16. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 32; Issue 5. Issue front cover thumbnail. Volume 32, Issue 5. October 2009, pages 465-561. pp 465-470 Nanomatter. Preparation and characterization of nano-hydroxyapatite powder using sol–gel technique · K P Sanosh Min-Cheol Chu A Balakrishnan T N Kim ...

  17. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 34; Issue 3. Issue front cover thumbnail. Volume 34, Issue 3. June 2011, pages 417-594. pp 417-422. Gold nanoparticle-coated biomaterial as SERS micro-probes · G V Pavan Kumar · More Details Abstract Fulltext PDF. We report for the first time, on the utility of ...

  18. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 5. Structural, microstructural and optical properties of Cu 2 ZnSnS 4 thin films prepared by thermal evaporation: effect of substrate temperature and annealing. U CHALAPATHI S UTHANNA V SUNDARA RAJA. Volume 40 Issue 5 September 2017 pp 887-895 ...

  19. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 30; Issue 1. Issue front cover thumbnail. Volume 30, Issue 1. February 2007, pages 1-71. pp 1-3 Single Crystals. Thermoluminescence characteristics of Sm doped NaYF4 crystals · M V Ramana Reddy Ch Gopal Reddy K Narasimha Reddy · More Details Abstract ...

  20. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 36; Issue 2. Issue front cover thumbnail. Volume 36, Issue 2. April 2013, pages 183-344. pp 183-188. Antimicrobial coatings — obtaining and characterization · Cornelia Guran Alexandra Pica Denisa Ficai Anton Ficai Cezar Comanescu · More Details Abstract Fulltext ...

  1. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 28; Issue 2. Issue front cover thumbnail. Volume 28, Issue 2. April 2005, pages 81-185. pp 81-85 Alloys and Steels. Corrosion of steel structures in sea-bed sediment · Xiutong Wang Jizhou Duan Yan Li Jie Zhang Shide Ma Baorong Hou · More Details Abstract Fulltext ...

  2. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 25; Issue 1. Issue front cover thumbnail. Volume 25, Issue 1. February 2002, pages 1-78. pp 1-5 Thin Films. Organization of copper nanoclusters in Langmuir–Blodgett films · G Hemakanthi Aruna Dhathathreyan T Ramasami · More Details Abstract Fulltext PDF.

  3. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 24; Issue 2. Issue front cover thumbnail. Volume 24, Issue 2. April 2001, pages 95-255. pp 95-95. Foreword · B K Sarkar · More Details Fulltext PDF. pp 97-100. Some numerical approaches of creep, thermal shock, damage and delayed failure of ceramics and ...

  4. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 26; Issue 6. Issue front cover thumbnail. Volume 26, Issue 6. October 2003, pages 569-654. pp 569-574 Semiconductors. Anisotropic behaviour of semiconducting tin monosulphoselenide single crystals · T H Patel Rajiv Vaidya S G Patel · More Details Abstract Fulltext ...

  5. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 37; Issue 1. Issue front cover thumbnail. Volume 37, Issue 1. February 2014, pages 1-166. pp 1-8. Synthesis and characterization of TiO2 –SiO2 nanoparticles as catalyst for dehydrogenation of 1,4-dihydropyridines · F Farzaneh L Jafarie Fourozune · More Details ...

  6. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 32; Issue 2. Issue front cover thumbnail. Volume 32, Issue 2. April 2009, pages 117-214. pp 117-123 Thin Films and Nanomatter. Microstructural characteristics and mechanical properties of magnetron sputtered nanocrystalline TiN films on glass substrate.

  7. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 32; Issue 4. Issue front cover thumbnail. Volume 32, Issue 4. August 2009, pages 369-463. pp 369-373 Thin Films. Mobility activation in thermally deposited CdSe thin films · Kangkan Sarmah Ranjan Sarma · More Details Abstract Fulltext PDF. Effect of illumination on ...

  8. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 24; Issue 1. Issue front cover thumbnail. Volume 24, Issue 1. February 2001, pages 1-94. pp 1-21 Review---Phase Transitions. Kinetics of pressure induced structural phase transitions—A review · N V Chandra Shekar K Govinda Rajan · More Details Abstract Fulltext ...

  9. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 23; Issue 3. Issue front cover thumbnail. Volume 23, Issue 3. June 2000, pages 159-238. pp 159-163 Nanomaterials. A note on the use of ellipsometry for studying the kinetics of formation of self-assembled monolayers · Murali Sastry · More Details Abstract Fulltext PDF.

  10. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 27; Issue 3. Issue front cover thumbnail. Volume 27, Issue 3. June 2004, pages 217-322. pp 217-220 Synthesis. Synthesis of BaTiO3 powder from barium titanyl oxalate (BTO) precursor employing microwave heating technique · Y S Malghe A V Gurjar S R Dharwadkar.

  11. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 33; Issue 5 ... Volume 33, Issue 5. October 2010, pages 519-645. pp 519-523. Size variation of polyaniline nanoparticles dispersed in polyvinyl alcohol matrix · J Bhadra D Sarkar .... Ethanol and LPG sensing characteristics of SnO2 activated Cr2O3 thick film sensor.

  12. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 1. Issue front cover thumbnail. Volume 39, Issue 1. February 2016, pages 1-336b. pp 1-5. Biogenic ZnO nanoparticles synthesized using L. aculeata leaf extract and their antifungal activity against plant fungal pathogens · S Narendhran Rajeshwari Sivaraj.

  13. European Science Notes Information Bulletin.

    Science.gov (United States)

    1992-12-01

    Office of Naval Research AD-A259 632 STr "., A European Office l illlillIIIIllllllil 92-06 NAVSO P-3678 ESN I NFORMATION BULLETIN European Science...Products ites, chocolates (for composites, abrasives Development Laboratory). The director of the can be added to the water to help it cut but laboratory

  14. The Bulletin turns the page

    CERN Multimedia

    2006-01-01

    Today, the paper version of the CERN Bulletin has a new look, the first since the 1970s. The new layout, which has been designed to improve readability, is part of an ongoing effort to improve internal communication at CERN. The Bulletin is the Organization's main tool for communication with the CERN community. It keeps everyone abreast of information that is important and essential for our working life at CERN. It plays an important role in keeping us up to date with social and scientific developments at the Laboratory. And it should be a force for cohesion across this very diverse organization. At the same time, the distribution for the printed Bulletin is being changed from individual mailboxes to distribution points around the Laboratory. This reflects changing reading habits, with the on-line version gaining a steadily increasing readership. For some time now, the paper Bulletin has been published fortnightly. However, the on-line version is updated weekly, so I encourage you all to look at it. In addi...

  15. Crime Solving Techniques: Training Bulletin.

    Science.gov (United States)

    Sands, Jack M.

    The document is a training bulletin for criminal investigators, explaining the use of probability, logic, lateral thinking, group problem solving, and psychological profiles as methods of solving crimes. One chpater of several pages is devoted to each of the five methods. The use of each method is explained; problems are presented for the user to…

  16. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 35; Issue 7. Issue front cover thumbnail. Volume 35, Issue 7. December 2012, pages 1039-1239. pp 1039-1045. Development, characterization, sintering, dielectric and optical properties of NdBa2ZrO5.5 nanocrystals · V Ratheesh Kumar P R S Wariar R Pazhani J K ...

  17. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 26; Issue 7. Issue front cover .... pp 699-701 Cements. Leaching ofCo andCs from spent ion exchange resins in cement–bentonite clay matrix .... pp 733-739 Composites. Synthesis, characterization and low frequency a.c. conduction of polyaniline/fly ash composites.

  18. AAHE Bulletin, 1995-96.

    Science.gov (United States)

    Marchese, Theodore J., Ed.

    1996-01-01

    The 10 issues of this organizational bulletin for the 1995-96 school year present reports, reviews, and essays on issues concerning the advancement of higher education as well as organizational news items. Major articles include: "Bowling Alone"--An Interview with Robert Putnam; "Crossing Boundaries: Pathways to Productive Learning…

  19. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 27; Issue 2. Issue front cover thumbnail. Volume 27, Issue 2. April 2004, pages 85-216. pp 85-111 Review---Thin Films. Deposition of metal chalcogenide thin films by successive ionic layer adsorption and reaction (SILAR) method · H M Pathan C D Lokhande.

  20. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 36; Issue 4. Issue front cover thumbnail. Volume 36, Issue 4. August 2013, pages 505-764. pp 505-511. Preparation and gas-sensing property of parallel-aligned ZnO nanofibrous films · Zikui Bai Weilin Xu Changsheng Xie Mingchao Dong Shunping Zhang Jie Xu Shili ...

  1. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 29; Issue 1. Issue front cover thumbnail. Volume 29, Issue 1. February 2006, pages 1-99. pp 1-5 Nanomaterials. A simple synthesis and characterization of CuS nanocrystals · Ujjal K Gautam Bratindranath Mukherjee · More Details Abstract Fulltext PDF. Water-soluble ...

  2. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 3. Issue front cover thumbnail. Volume 40, Issue 3. June 2017, pages 427-614. pp 427-434. Electrochemical impedance studies of capacity fading of electrodeposited ZnO conversion anodes in Li-ion battery · G K KIRAN TIRUPATHI RAO PENKI N ...

  3. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 3. Issue front cover thumbnail. Volume 39, Issue 3. June 2016, pages 603-912. pp 603-611. Stability field diagrams for Ln–O–Cl systems · K T JACOB APOORVA DIXIT ARNEET RAJPUT · More Details Abstract Fulltext PDF. Isothermal stability field diagrams ...

  4. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 38; Issue 4. Issue front cover thumbnail. Volume 38, Issue 4. August 2015, pages 817-1118. pp 817-823. Viscoelastic nature of Au nanoparticle–PDMS nanocomposite gels · Ritu Gupta Hima K Nagamanasa Rajesh Ganapathy Giridhar U Kulkarni · More Details Abstract ...

  5. Bulletin of Materials Science | News

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 38; Issue 7. Issue front cover thumbnail. Volume 38, Issue 7. December 2015, pages 1673-1897cq. pp 1673-1678. Magnetic properties and microwave absorption properties of short carbon fibres coated by Ni–Fe alloy coatings · Ying Liu Chengwen Qiang · More Details ...

  6. Public participation in the evaluation of innovative environmental cleanup technology

    International Nuclear Information System (INIS)

    Peterson, T.; McCabe, G.; Serie, P.; Niesen, K.

    1994-08-01

    Technologies for remediation of contamination are urgently needed to clean up US Department of Energy (DOE) sites across the country. DOE is managing a national program to develop, demonstrate, and deploy new technologies with promise to expedite this cleanup. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is one such effort. Time and resources, however, are too limited to be invested in methods of remediation that will never be deployed because they have not been rigorously evaluated or because they face the withering opposition of stakeholders. Therefore the VOC-Arid ID is assessing technology both in terms of its technical effectiveness and its stakeholder acceptability. Only if a technology performs as required and is acceptable to regulators, users of technology, and the public will the VOC-Arid ID recommend its use. What distinguishes public involvement in the VOC-Arid ID is the direct influence stakeholders have on the design of technology demonstrations by working directly with technology developers. Stakeholders participated in defining the criteria with which innovative environmental cleanup technology is being evaluated. The integrated demonstration is committed to providing stakeholders with the information they've indicated they need to reach reasoned judgments about the use of specific cleanup technologies. A guiding principle of the VOC-Arid ID is that stakeholder participation improves the technologies being developed, enhances the acceptance of the technologies, and will lead to the broad and timely deployment of appropriate and effective methods of environmental remediation. The VOC-Arid ID has involved stakeholders from the host demonstration site, Hanford, Washington, and from other and sites where the ID technologies may be deployed

  7. Technology evaluation: leukemia therapy, University of Pennsylvania.

    Science.gov (United States)

    Orr, R M

    1999-06-01

    The University of Pennsylvania is developing an antisense oligonucleotide (AS ON) as a potential treatmentfor myelogenous leukemia. The 24-mer phosphorothioate (PS) ON targets the c-myb gene (codons 2 to 9), a regulator of transcription. In a pilot study, patient bone marrow was purged with the PS ON before being returned to the patient. In January 1997, it was reported that out of six evaluable patients, four demonstrated marked hematological remission with normalized white blood cell counts. A second phase I trial was initiated, in which myelogenous leukemia patients were treated with systemic infusions of the PS ON at doses of 0.3 to 2.0 mg/kg/dayfor 7 days. By January 1997, 18 patients had been treated, 12 showed stable disease and one patient in blast crisis experienced a transient reversal to the chronic phase of the disease. No dose-related toxicity was noted and c-myb mRNA and protein levels were halved. Preclinical studies in leukemic mice showed that the myb AS PS ON increased survival times 2- to 4-fold and reduced leukemic proliferation in the brain [229790]. The ON was originally developed and patented at Temple University and was being jointly developed by Lynx Therapeutics, however, this collaboration was terminated in 1996 [264351]. New phase I studies are starting in 1999, with INX-3001 (University of Pennsylvania c-myb AS PS) supported by the NIH and Inex Pharmaceuticals Corporation.

  8. Standardized and Repeatable Technology Evaluation for Cybersecurity Acquisition

    Science.gov (United States)

    2017-02-01

    include: DITEC+, an enterprise-level tool, and the Cyber-Supervisory Control and Data Acquisition ( SCADA ) Evaluation Capability (C-SEC), an...instantiation of DITEC for evaluating SCADA network cybersecurity technologies. iii CONTENTS EXECUTIVE SUMMARY...a product, where a network administrator would be more concerned with the ability to install a vendor update with minimal system downtime. The UPD

  9. Methane mitigation timelines to inform energy technology evaluation

    International Nuclear Information System (INIS)

    Roy, Mandira; Edwards, Morgan R; Trancik, Jessika E

    2015-01-01

    Energy technologies emitting differing proportions of methane (CH 4 ) and carbon dioxide (CO 2 ) vary significantly in their relative climate impacts over time, due to the distinct atmospheric lifetimes and radiative efficiencies of the two gases. Standard technology comparisons using the global warming potential (GWP) with a fixed time horizon do not account for the timing of emissions in relation to climate policy goals. Here we develop a portfolio optimization model that incorporates changes in technology impacts based on the temporal proximity of emissions to a radiative forcing (RF) stabilization target. An optimal portfolio, maximizing allowed energy consumption while meeting the RF target, is obtained by year-wise minimization of the marginal RF impact in an intended stabilization year. The optimal portfolio calls for using certain higher-CH 4 -emitting technologies prior to an optimal switching year, followed by CH 4 -light technologies as the stabilization year approaches. We apply the model to evaluate transportation technology pairs and find that accounting for dynamic emissions impacts, in place of using the static GWP, can result in CH 4 mitigation timelines and technology transitions that allow for significantly greater energy consumption while meeting a climate policy target. The results can inform the forward-looking evaluation of energy technologies by engineers, private investors, and policy makers. (letter)

  10. Methane mitigation timelines to inform energy technology evaluation

    Science.gov (United States)

    Roy, Mandira; Edwards, Morgan R.; Trancik, Jessika E.

    2015-11-01

    Energy technologies emitting differing proportions of methane (CH4) and carbon dioxide (CO2) vary significantly in their relative climate impacts over time, due to the distinct atmospheric lifetimes and radiative efficiencies of the two gases. Standard technology comparisons using the global warming potential (GWP) with a fixed time horizon do not account for the timing of emissions in relation to climate policy goals. Here we develop a portfolio optimization model that incorporates changes in technology impacts based on the temporal proximity of emissions to a radiative forcing (RF) stabilization target. An optimal portfolio, maximizing allowed energy consumption while meeting the RF target, is obtained by year-wise minimization of the marginal RF impact in an intended stabilization year. The optimal portfolio calls for using certain higher-CH4-emitting technologies prior to an optimal switching year, followed by CH4-light technologies as the stabilization year approaches. We apply the model to evaluate transportation technology pairs and find that accounting for dynamic emissions impacts, in place of using the static GWP, can result in CH4 mitigation timelines and technology transitions that allow for significantly greater energy consumption while meeting a climate policy target. The results can inform the forward-looking evaluation of energy technologies by engineers, private investors, and policy makers.

  11. Simulation Studies for the evaluation of health information technologies:

    DEFF Research Database (Denmark)

    Ammenwerth, Elske; Hackl, Werner O; Binzer, Kristine

    2012-01-01

    It is essential for new health information technologies (IT) to undergo rigorous evaluations to ensure they are effective and safe for use in real-world situations. However, evaluation of new health IT is challenging, as field studies are often not feasible when the technology being evaluated...... of participants before using unfamiliar applications; consideration of time, effort and costs of conducting the simulation; technical maturity of the evaluated system; and allowing adequate preparation of simulation scenarios and simulation setting. Simulation studies are an interesting but time......-consuming approach, which can be used to evaluate newly developed health IT systems, particularly those systems that are not yet suffi ciently mature to undergo field evaluation studies....

  12. Publication of the bulletin in 2011

    CERN Multimedia

    DG Unit

    2010-01-01

    The table below lists the 2011 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Printed version 3-4   Tuesday 11 January Fridays 14 and 21 January Wednesday 19 January 5-6   Tuesday 25 January Fridays 28 January and 4 February Wednesday 2 February 7-8 Tuesday 8 February Fridays 11 and 18 February Wednesday 16 February 9-10 Tuesday 22 F...

  13. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1 and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the ranking os remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. The focus of Vol. 1, Pt. B, is RA, and it has been divided into six chapters. The first chapter is an introduction, which defines problems specific to the ER Program for ORNL. Chapter 2 provides a general overview of the TLD. Chapters 3 through 5 are organized into necessary subelement categories: RA, characterization, and robotics and automation. The final chapter contains regulatory compliance information concerning RA.

  14. International bulletin on atomic and molecular data for fusion. No. 48

    International Nuclear Information System (INIS)

    1994-10-01

    This bulletin provides atomic and molecular data references relevant to thermonuclear fusion research and technology. In part I the indexing of the papers is given separately for (i) structure and spectra (energy levels, wavelengths; transition probabilities, oscillator strengths; interatomic potentials), (ii) atomic and molecular collisions (photon collisions, electron collisions, heavy particle collisions), and (iii) surface interactions (sputtering, surface damage, blistering, flaking, arcing, chemical reactions). Part II contains the bibliographic data for the above listed topics and for plasma composition and impurities, plasma heating, cooling and fuelling, high energy laser- and beam- matter interaction, bibliographic and numerical data collections, and on interaction of atomic particles with fields. Also included are sections on atomic and molecular data needs for fusion research and on news about ALADDIN (A Labelled Atomic Data Interface) and evaluated-data bases

  15. International bulletin on atomic and molecular data for fusion. No. 42-45

    International Nuclear Information System (INIS)

    Botero, J.

    1991-01-01

    The bulletin is published by the International Atomic Energy Agency to provide atomic and molecular data relevant to fusion research and technology. In Part I the indexed papers are listed separately for (i) structure and spectra (energy levels, wavelengths; transition probabilities, oscillator strengths; polarizabilities, electric moments; interatomic potentials); (ii) atomic and molecular collisions (photon collisions; electro collisions; heavy-particle collisions; homonuclear sequences), and (iii) surface interactions (sputtering; trapping, detrapping; adsorption, desorption; surface damage; blistering, flaking; chemical reactions). Part II contains the bibliographic data for the above listed topics and for plasma composition and impurities; plasma heating, cooling and fuelling; fusion research of general interest; high energy laser- and beam-matter interaction; interaction of atomic particles with fields. A list of evaluated data bases on atomic and molecular collisions and on particle-surface interactions is also given

  16. Technology Evaluation Workshop Report for Tank Waste Chemical Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Eberlein, S.J.

    1994-04-01

    A Tank Waste Chemical Characterization Technology Evaluation Workshop was held August 24--26, 1993. The workshop was intended to identify and evaluate technologies appropriate for the in situ and hot cell characterization of the chemical composition of Hanford waste tank materials. The participants were asked to identify technologies that show applicability to the needs and good prospects for deployment in the hot cell or tanks. They were also asked to identify the tasks required to pursue the development of specific technologies to deployment readiness. This report describes the findings of the workshop. Three focus areas were identified for detailed discussion: (1) elemental analysis, (2) molecular analysis, and (3) gas analysis. The technologies were restricted to those which do not require sample preparation. Attachment 1 contains the final workshop agenda and a complete list of attendees. An information package (Attachment 2) was provided to all participants in advance to provide information about the Hanford tank environment, needs, current characterization practices, potential deployment approaches, and the evaluation procedure. The participants also received a summary of potential technologies (Attachment 3). The workshop opened with a plenary session, describing the background and issues in more detail. Copies of these presentations are contained in Attachments 4, 5 and 6. This session was followed by breakout sessions in each of the three focus areas. The workshop closed with a plenary session where each focus group presented its findings. This report summarizes the findings of each of the focus groups. The evaluation criteria and information about specific technologies are tabulated at the end of each section in the report. The detailed notes from each focus group are contained in Attachments 7, 8 and 9.

  17. Technology Evaluation Workshop Report for Tank Waste Chemical Characterization

    International Nuclear Information System (INIS)

    Eberlein, S.J.

    1994-04-01

    A Tank Waste Chemical Characterization Technology Evaluation Workshop was held August 24--26, 1993. The workshop was intended to identify and evaluate technologies appropriate for the in situ and hot cell characterization of the chemical composition of Hanford waste tank materials. The participants were asked to identify technologies that show applicability to the needs and good prospects for deployment in the hot cell or tanks. They were also asked to identify the tasks required to pursue the development of specific technologies to deployment readiness. This report describes the findings of the workshop. Three focus areas were identified for detailed discussion: (1) elemental analysis, (2) molecular analysis, and (3) gas analysis. The technologies were restricted to those which do not require sample preparation. Attachment 1 contains the final workshop agenda and a complete list of attendees. An information package (Attachment 2) was provided to all participants in advance to provide information about the Hanford tank environment, needs, current characterization practices, potential deployment approaches, and the evaluation procedure. The participants also received a summary of potential technologies (Attachment 3). The workshop opened with a plenary session, describing the background and issues in more detail. Copies of these presentations are contained in Attachments 4, 5 and 6. This session was followed by breakout sessions in each of the three focus areas. The workshop closed with a plenary session where each focus group presented its findings. This report summarizes the findings of each of the focus groups. The evaluation criteria and information about specific technologies are tabulated at the end of each section in the report. The detailed notes from each focus group are contained in Attachments 7, 8 and 9

  18. TECHNOLOGY EVALUATION REPORT: SILICATE TECHNOLOGY CORPORATION - SOLIDIFICATION/STABILIZATION OF PCP AND INORGANIC CONTAMINANTS IN SOILS - SELMA, CA

    Science.gov (United States)

    This Technolgy Evaluation Report evaluates the solidification/stabilization process of Silicate Technology Corporation (STC) for the on-site treatment of contaminated soil The STC immobilization technology uses a proprietary product (FMS Silicate) to chemically stabilize and ...

  19. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Kwon, J. D. [Yeungnam Univ., Gyeongsan (Korea, Republic of); Kang, K. J. [Chonnam National Univ., Gwangju (Korea, Republic of)] (and others)

    2001-03-15

    This research focuses on development of reliable life evaluation technology for nuclear power plant (NPP) components, and is divided into two parts, development of life evaluation systems for pressurized components and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered: development of expert systems for integrity assessment of pressurized components, development of integrity evaluation systems of steam generator tubes, prediction of failure probability for NPP components based on probabilistic fracture mechanics, development of fatigue damage evaluation technique for plant life extension, domestic round robin analysis for pressurized thermal shock of reactor vessels, domestic round robin analysis of constructing P--T limit curves for reactor vessels, and development of data base for integrity assessment. For evaluation of applicability of emerging technology to operating plants, on the other hand, the following eight topics are covered: applicability of the Leak-Before-Break analysis to Cast S/S piping, collection of aged material tensile and toughness data for aged Cast S/S piping, finite element analyses for load carrying capacity of corroded pipes, development of Risk-based ISI methodology for nuclear piping, collection of toughness data for integrity assessment of bi-metallic joints, applicability of the Master curve concept to reactor vessel integrity assessment, measurement of dynamic fracture toughness, and provision of information related to regulation and plant life extension issues.

  20. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Kim, Yun Jae; Choi, Jae Boong [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2002-03-15

    This project focuses on developing reliable life evaluation technology for nuclear power plant components, and is divided into two parts, development of a life evaluation system for nuclear pressure vessels and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered in this project: defect assessment method for steam generator tubes, development of fatigue monitoring system, assessment of corroded pipes, domestic round robin analysis for constructing P-T limit curve for RPV, development of probabilistic integrity assessment technique, effect of aging on strength of dissimilar welds, applicability of LBB to cast stainless steel, and development of probabilistic piping fracture mechanics.

  1. Energetic and economic evaluations on hydrogen storage technologies

    Energy Technology Data Exchange (ETDEWEB)

    Arca, S.; Di Profio, P.; Germani, R. [Perugia Univ., Perugia (Italy). Centro di Eccellenza Materiali Innovativi Nanostrutturati, Dip. Chimica; Savelli, G.; Cotana, F.; Rossi, F.; Amantini, M. [Universita degli Studi di Perugia, Perugia (Italy). Dipartimento di Ingegneria Industriale, Sezione di Fisica Tecnica

    2008-07-01

    With the development of the hydrogen economy and fuel cell vehicles, a major technological issue has emerged regarding the storage and delivery of large amounts of hydrogen. Several hydrogen storage methodologies are available while other technologies are being developed aside from the classical compression and liquefaction of hydrogen. A novel technology is also in rapid process, which is based on clathrate hydrates of hydrogen. The features and performances of available storage systems were evaluated in an effort to determine the best technology throughout the hydrogen chain. For each of the storage solutions presented, the key parameters were compared. These key parameters included interaction energy between hydrogen and support; real and practical storage capacity; and specific energy consumption. The paper presented the study methods and discussed hydrogen storage technologies using compressed hydrogen; metal hydrides; liquefied hydrogen; carbon nanotubes; ammonia; and gas hydrates. Carbon dioxide emissions were also evaluated for each storage system analyzed. The paper also presented the worst scenario. It was concluded that a technology based on clathrate hydrates of hydrogen, while being far from optimized, was highly competitive with the classical approaches. 21 refs., 9 figs.

  2. Clinical Simulation: A Protocol for Evaluation of Mobile Technology.

    Science.gov (United States)

    Mather, Carey; Jensen, Sanne; Cummings, Elizabeth

    2017-01-01

    For mobile technology to be accepted at point of care in healthcare environments there is a need to demonstrate benefits whilst ameliorating the risks and challenges. To provide a standardised approach to evaluation of mobile technology a simulation protocol was developed to provide guidance for its use in healthcare environments. Simulated conditions provide the opportunity to assess intended and unintended consequences and identify potential workarounds when using technology. The protocol can also be used to demonstrate the importance of the development of digital professionalism by end-users prior to students entering the clinical practice setting. The mobile technology protocol was adapted from a health information systems protocol developed and used at the ITX Lab, Denmark for use in other simulation laboratories. Use case scenarios were developed to enable evaluation of mobile technology for mobile learning of nurses, nurse supervisors, students and patients. The scenarios can be used in a range of simulated environments including hospital bedside, outpatient clinic or community settings. A case study exemplar of a nurse and patient is included to demonstrate how the mobile technology protocol can be applied.

  3. X-231B technology demonstration for in situ treatment of contaminated soil: Technology evaluation and screening

    International Nuclear Information System (INIS)

    Siegrist, R.L.; Morris, M.I.; Donaldson, T.L.; Palumbo, A.V.; Herbes, S.E.; Jenkins, R.A.; Morrissey, C.M.; Harris, M.T.

    1993-08-01

    The Portsmouth Gaseous Diffusion Plant (Ports) is located approximately 70 miles south of Columbus in southern Ohio. Among the several waste management units on the facility, the X-231B unit consists of two adjacent oil biodegradation plots. The plots encompass ∼ 0.8 acres and were reportedly used from 1976 to 1983 for the treatment and disposal of waste oils and degreasing solvents, some containing uranium-235 and technetium-99. The X-231B unit is a regulated solid waste management unit (SWMU) under the Resource Conservation and Recovery Act (RCRA). The X-231B unit is also a designated SWMU located within Quadrant I of the site as defined in an ongoing RCRA Facilities Investigation and Corrective Measures Study (RFI/CMS). Before implementing one or more Technology Demonstration Project must be completed. The principal goal of this project was to elect and successfully demonstrate one ore more technologies for effective treatment of the contaminated soils associated with the X-231B unit at PORTS. The project was divided into two major phases. Phase 1 involved a technology evaluation and screening process. The second phase (i.e., Phase 2) was to involve field demonstration, testing and evaluation of the technology(s) selected during Phase 1. This report presents the methods, results, and conclusions of the technology evaluation and screening portion of the project

  4. Replacing Smartphones With Mini Tablet Technology: An Evaluation.

    Science.gov (United States)

    Maneval, Rhonda; Mechtel, Marci

    Handheld technology allows students to access point-of-care resources throughout the clinical experience. To assess the viability of replacing student smartphones with tablets, an evaluation project was undertaken. Overall, students were equally dissatisfied with the 2 types of tablets that were evaluated. Students saw the potential usefulness of tablets to manage clinical assignments, interact with the learning management system, and communicate with faculty, but not for retrieving information currently accessible on their phones.

  5. Economic evaluation of information technology applications on dairy farms

    OpenAIRE

    Asseldonk, van, M.A.P.M.

    1999-01-01

    The research described in this thesis focused on the economic evaluation of information technology (IT) applications on dairy farms in order to support investment decisions. The evaluation included a normative (deductive) approach and an empirical (positive) approach. The normative approach predicted potential benefits from a theoretical model of the investment, and investigated how farmers should deal with the applications. The empirical approach observed the actual effects of the i...

  6. Evaluating learning and teaching technologies in further education

    OpenAIRE

    Jones, Ann; Barnard, Jane; Calder, Judith; Scanlon, Eileen; Thompson, Julie

    2000-01-01

    With the current emphasis on quality assessment and the role of evaluation in quality assessment, it is likely that teachers in post-compulsory education will increasingly be expected to evaluate their teaching, especially when making changes to their teaching methods. In Further Education (FE), there have been a number of developments to foster the use of Information and Learning Technologies (ILT), following the publication of the Higginson Report in 1996. However, there is some evidence th...

  7. Evaluation of National School for Professional Technology Education in Mexico

    OpenAIRE

    Lopez-Acevedo, Gladys

    2005-01-01

    The National School for Professional Technology Education (CONALEP) is Mexico's largest and oldest technical education system. CONALEP serves low-income students at the upper-secondary school level in Mexico. The labor market performance of CONALEP graduates has been evaluated four times in the past. These evaluations have yielded encouraging results, showing that CONALEP's graduates find jobs faster and earn higher wages than similar "control" groups. In contrast, using non-experimental meth...

  8. Evaluation of Technological Quality of Meat Produced from Nsukka ...

    African Journals Online (AJOL)

    The technological quality of raw meat from Nsukka local abattoir was evaluated by analyzing the proximate composition, water holding capacity, pH, Napole yield and sensory colour and texture of longissimus dorsi [LD] and psoas major [PM] of beef and pork. Results show that moisture [71.36 – 72.76%], protein [21.37 ...

  9. Healthy China 2020 : Policy and Technology Evaluation | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Healthy China 2020 : Policy and Technology Evaluation. In April 2009, China issued a new round of health sector reform policies aimed at providing a blueprint for universal basic healthcare coverage for all by 2020. The China Health Economics Institute (CHEI) within the Chinese Ministry of Health is responsible for ...

  10. A Methodology for Evaluating a Systems Approach to Instructional Technology.

    Science.gov (United States)

    Felker, Daniel B.; Shettel, Harris H.

    This study was designed to develop a methodology for evaluating the application of Instructional Technology (IT), conceived of in terms of a systems approach. An idealized model of IT was prepared based on a literature review of current models. The model was matched against basic nursing education programs purporting to use IT. A rating technique…

  11. Evaluating the Feasibility of Using Remote Technology for Cochlear Implants

    Science.gov (United States)

    Goehring, Jenny L.; Hughes, Michelle L.; Baudhuin, Jacquelyn L.

    2012-01-01

    The use of remote technology to provide cochlear implant services has gained popularity in recent years. This article contains a review of research evaluating the feasibility of remote service delivery for recipients of cochlear implants. To date, published studies have determined that speech-processor programming levels and other objective tests…

  12. Techno-economic evaluation of broadband access technologies

    DEFF Research Database (Denmark)

    Sigurdsson, Halldór Matthias; Skouby, Knud Erik

    2005-01-01

    Broadband for all is an essential element in the EU policy concerning the future of ICT-based society. The overall purpose of this paper is to present a model for evaluation of different broadband access technologies and to present some preliminary results based on the model that has been carried...

  13. The evaluations of facebook as an educational technology tools in ...

    African Journals Online (AJOL)

    Entrepreneurship is integrated into the curriculum structure designed for students studying subjects other than Business. The aim of this study was to evaluate the usage of Facebook as an educational technology tool in entrepreneurship course in TVET institution particularly in Polytechnic Malaysia. The 400 sample was ...

  14. African Journal of Science and Technology (AJST) EVALUATION OF ...

    African Journals Online (AJOL)

    opiyo

    1:June, 2001. African Journal of Science and Technology (AJST). Science and Engineering Series Vol. 2, No. 1, pp. 65-71. EVALUATION OF THE FEEDING VALUE OF TWO TROPICAL. CEREAL STRAWS, MAIZE STOVER, RICE STRAW AND THEIR BOTANICAL. FRACTIONS BY NYLON AND MOBILE BAG TECHNIQUE.

  15. Strategic Evaluation of University Knowledge and Technology Transfer Effectiveness

    Science.gov (United States)

    Tran, Thien Anh

    2013-01-01

    Academic knowledge and technology transfer has been growing in importance both in academic research and practice. A critical question in managing this activity is how to evaluate its effectiveness. The literature shows an increasing number of studies done to address this question; however, it also reveals important gaps that need more research.…

  16. Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

    2006-09-01

    The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

  17. Oil Spill Research in the Bulletin

    Science.gov (United States)

    The Bulletin of Environmental Contamination and Toxicology has been a venue for publishing oil spill research for over forty years. Rehwoldt et al. (1974) published the first oil spill focused paper in the Bulletin, reporting on the aquatic toxicity of two spill mitigating agents...

  18. 1991 OCRWM bulletin compilation and index

    International Nuclear Information System (INIS)

    1992-05-01

    The OCRWM Bulletin is published by the Department of Energy, Office of Civilian Radioactive Waste Management, to provide current information about the national program for managing spent fuel and high-level radioactive waste. The document is a compilation of issues from the 1991 calendar year. A table of contents and an index have been provided to reference information contained in this year's Bulletins

  19. Juvenile Arrests, 2007. Juvenile Justice Bulletin

    Science.gov (United States)

    Puzzanchera, Charles

    2009-01-01

    This Bulletin summarizes 2007 juvenile crime and arrest data reported by local law enforcement agencies across the country and cited in the FBI report, "Crime in the United States 2007." The Bulletin describes the extent and nature of juvenile crime that comes to the attention of the justice system. It serves as a baseline for comparison for…

  20. OCRWM Bulletin, summer/fall 1994

    International Nuclear Information System (INIS)

    1994-01-01

    This publication consists of two parts, OCRWM Bulletin, and Of Mountains ampersand Science which is about the Yucca Mountain project. The OCRWM bulletin provides information about OCRWM activities, program update to Congress, reorganization, training provided on OCRWM database, OCRWM calendar, and exhibit schedule for 1994. Recent work at the Yucca Mountain project such as the tunnel boring machines are presented in layman's term

  1. ICFA Instrumentation Bulletin, Volume 14, Spring 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The publication of the ICFA Instrumentation Bulletin is an activity of the Panel on Future Innovation and Development of ICFA (International Committee for Future Accelerators). The Bulletin reports on research and progress in the field of instrumentation with emphasis on application in the field of high-energy physics. It encourages issues of generic instrumentation.

  2. ICFA Instrumentation Bulletin, Volume 13, Fall 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The publication of the ICFA Instrumentation Bulletin is an activity of the Panel on Future Innovation and Development of ICFA (International Committee for Future Accelerators). The Bulletin reports on research and progress in the field of instrumentation with emphasis on application in the field of high-energy physics. It encourages issues of generic instrumentation.

  3. Dissemination of Technology to Evaluate Healthy Food Incentive Programs.

    Science.gov (United States)

    Freedman, Darcy A; Hunt, Alan R; Merritt, Katie; Shon, En-Jung; Pike, Stephanie N

    2017-03-01

    Federal policy supports increased implementation of monetary incentive interventions for chronic disease prevention among low-income populations. This study describes how a Prevention Research Center, working with a dissemination partner, developed and distributed technology to support nationwide implementation and evaluation of healthy food incentive programming focused on Supplemental Nutrition Assistance Program recipients. FM Tracks, an iOS-based application and website, was developed to standardize evaluation methods for healthy food incentive program implementation at direct-to-consumer markets. This evaluation examined diffusion and adoption of the technology over 9 months (July 2015-March 2016). Data were analyzed in 2016. FM Tracks was disseminated to 273 markets affiliated with 37 regional networks in 18 states and Washington, DC. All markets adopted the sales transaction data collection feature, with nearly all recording at least one Supplemental Nutrition Assistance Program (99.3%) and healthy food incentive (97.1%) transaction. A total of 43,493 sales transactions were recorded. By the ninth month of technology dissemination, markets were entering individual sales transactions using the application (34.5%) and website (29.9%) and aggregated transactions via website (35.6%) at similar rates. Use of optional evaluation features like recording a customer ID with individual transactions increased successively with a low of 22.2% during the first month to a high of 69.2% in the ninth month. Systematic and widely used evaluation technology creates possibilities for pragmatic research embedded within ongoing, real-world implementation of food access interventions. Technology dissemination requires supportive technical assistance and continuous refinement that can be advanced through academic-practitioner partnerships. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  4. Cyber security evaluation of II&C technologies

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Laboratory (INL), Idaho Falls, ID (United States)

    2014-11-01

    The Light Water Reactor Sustainability (LWRS) Program is a research and development program sponsored by the Department of Energy, which is conducted in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Within the LWRS Program, the Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. The II&C Pathway is conducted by Idaho National Laboratory (INL). Cyber security is a common concern among nuclear utilities and other nuclear industry stakeholders regarding the digital technologies that are being developed under this program. This concern extends to the point of calling into question whether these types of technologies could ever be deployed in nuclear plants given the possibility that the information in them can be compromised and the technologies themselves can potentially be exploited to serve as attack vectors for adversaries. To this end, a cyber security evaluation has been conducted of these technologies to determine whether they constitute a threat beyond what the nuclear plants already manage within their regulatory-required cyber security programs. Specifically, the evaluation is based on NEI 08-09, which is the industry’s template for cyber security programs and evaluations, accepted by the Nuclear Regulatory Commission (NRC) as responsive to the requirements of the nuclear power plant cyber security regulation found in 10 CFR 73.54. The evaluation was conducted by a

  5. Oil Bypass Filter Technology Performance Evaluation - January 2003 Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Laurence R. Zirker; James E. Francfort

    2003-01-01

    This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

  6. Oil Bypass Filter Technology Performance Evaluation - First Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Zirker, L.R.; Francfort, J.E.

    2003-01-31

    This report details the initial activities to evaluate the performance of the oil bypass filter technology being tested by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass systems from the puraDYN Corporation. Each bus averages about 60,000 miles a year. The evaluation includes an oil analysis regime to monitor the presence of necessary additives in the oil and to detect undesirable contaminants. Very preliminary economic analysis suggests that the oil bypass system can reduce life-cycle costs. As the evaluation continues and oil avoidance costs are quantified, it is estimated that the bypass system economics may prove increasingly favorable, given the anticipated savings in operational costs and in reduced use of oil and waste oil avoidance.

  7. Environmental Evaluation of Soil Salinity with Various Watering Technologies Assessment.

    Science.gov (United States)

    Seitkaziev, Adeubay; Shilibek, Kenzhegali; Fakhrudenova, Idiya; Salybayev, Satybaldy; Zhaparova, Sayagul; Duisenbayeva, Saule; Bayazitova, Zulfia; Aliya, Maimakova; Seitkazieva, Karlygash; Aubakirov, Hamit

    2018-01-01

      The purpose of this study is to develop mathematical tools for evaluating the level of environmental safety of various watering technologies. A set of indicators, was developed with regard to the natural factors, the nature of the man-induced load, degradation type, and characteristics of the disruption of humification conditions. Thermal and physical characteristics of the soil, the state of its surface, and meteorological factors, including air temperature, relative humidity, precipitation, wind speed, solar radiation, etc. were studied with a view to determining the heat and air exchange in the soil. An environmental evaluation of the methods for saline land development was conducted with regard to the heat and moisture supply. This tool can be used to determine the level of environmental safety of soil salinization during the environmental evaluation of the investigation of soil salinity with various watering technologies.

  8. Evaluation of Brine Processing Technologies for Spacecraft Wastewater

    Science.gov (United States)

    Shaw, Hali L.; Flynn, Michael; Wisniewski, Richard; Lee, Jeffery; Jones, Harry; Delzeit, Lance; Shull, Sarah; Sargusingh, Miriam; Beeler, David; Howard, Jeanie; hide

    2015-01-01

    Brine drying systems may be used in spaceflight. There are several advantages to using brine processing technologies for long-duration human missions including a reduction in resupply requirements and achieving high water recovery ratios. The objective of this project was to evaluate four technologies for the drying of spacecraft water recycling system brine byproducts. The technologies tested were NASA's Forward Osmosis Brine Drying (FOBD), Paragon's Ionomer Water Processor (IWP), NASA's Brine Evaporation Bag (BEB) System, and UMPQUA's Ultrasonic Brine Dewatering System (UBDS). The purpose of this work was to evaluate the hardware using feed streams composed of brines similar to those generated on board the International Space Station (ISS) and future exploration missions. The brine formulations used for testing were the ISS Alternate Pretreatment and Solution 2 (Alt Pretreat). The brines were generated using the Wiped-film Rotating-disk (WFRD) evaporator, which is a vapor compression distillation system that is used to simulate the function of the ISS Urine Processor Assembly (UPA). Each system was evaluated based on the results from testing and Equivalent System Mass (ESM) calculations. A Quality Function Deployment (QFD) matrix was also developed as a method to compare the different technologies based on customer and engineering requirements.

  9. A case study evaluation of the use of video technology in concrete pavement evaluation.

    Science.gov (United States)

    2000-01-01

    This report presents the results of an evaluation of video technology as a possible solution to the problem of safely collecting objective condition data for prioritizing concrete pavement rehabilitation needs in Virginia. The study involved the eval...

  10. 75 FR 8043 - National Medal of Technology and Innovation Nomination Evaluation Committee

    Science.gov (United States)

    2010-02-23

    ...] National Medal of Technology and Innovation Nomination Evaluation Committee AGENCY: United States Patent... the National Medal of Technology and Innovation Nomination Evaluation Committee. The United States... FURTHER INFORMATION CONTACT: Richard Maulsby, Program Manager, National Medal of Technology and Innovation...

  11. EPA [Environmental Protection Agency] SITE [Superfund Innovative Technology Evaluation] program seeks technology proposals

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    EPA will issue an RFP to initiate the SITE-005 solicitation for demonstration of technologies under the Superfund Innovative Technology Evaluation (SITE) Program. This portion of the SITE program offers a mechanism for conducting a joint technology demonstration between EPA and the private sector. The goal of the demonstration program is to provide an opportunity for developers to demonstrate the performance of their technologies on actual hazardous wastes at Superfund sites, and to provide accurate and reliable data on that performance. Technologies selected must be of commercial scale and provide solutions to problems encountered at Superfund Sites. Primary emphasis in the RFP is on technologies that address: treatment of mixed, low level radioactive wastes in soils and groundwater; treatment of soils and sludges contaminated with organics and/or inorganics, materials handling as a preliminary step to treatment or further processing, treatment trains designed to handle specific wastes, are in situ technologies, especially those processes providing alternatives to conventional groundwater pump and treat techniques

  12. HEALTH TECHNOLOGY ASSESSMENT EVIDENCE ON E-HEALTH/M-HEALTH TECHNOLOGIES: EVALUATING THE TRANSPARENCY AND THOROUGHNESS.

    Science.gov (United States)

    Vukovic, Vladimir; Favaretti, Carlo; Ricciardi, Walter; de Waure, Chiara

    2018-01-01

    Evaluation is crucial for integration of e-Health/m-Health into healthcare systems and health technology assessment (HTA) could offer sound methodological basis for these evaluations. Aim of this study was to look for HTA reports on e-Health/m-Health technologies and to analyze their transparency, consistency and thoroughness, with the goal to detect areas that need improvement. PubMed, ISI-WOS, and University of York - Centre for Reviews and Dissemination-electronic databases were searched to identify reports on e-Health/m-Health technologies, published up until April 1, 2016. The International Network of Agencies for Health Technology Assessment (INAHTA) checklist was used to evaluate transparency and consistency of included reports. Thoroughness was assessed by checking the presence of domains suggested by the European network for Health Technology Assessment (EUnetHTA) HTA Core Model. Twenty-eight reports published between 1999 and 2015 were included. Most were delivered by non-European countries (71.4 percent) and only 35.7 percent were classified as full reports. All the HTA reports defined the scope of research whereas more than 80 percent provided author details, summary, discussed findings, and conclusion. On the contrary, policy and research questions were clearly defined in around 30 percent and 50 percent of reports. With respect to the EUnetHTA Core Model, around 70 percent of reports dealt with effectiveness and economic evaluation, more than 50 percent described health problem and approximately 40 percent organizational and social aspects. E-Health/m-Health technologies are increasingly present in the field of HTA. Yet, our review identified several missing elements. Most of the reports failed to respond to relevant assessment components, especially ethical, social and organizational implications.

  13. Practice-centred evaluation and the privileging of care in health information technology evaluation.

    Science.gov (United States)

    Darking, Mary; Anson, Rachel; Bravo, Ferdinand; Davis, Julie; Flowers, Steve; Gillingham, Emma; Goldberg, Lawrence; Helliwell, Paul; Henwood, Flis; Hudson, Claire; Latimer, Simon; Lowes, Paul; Stirling, Ian

    2014-06-05

    Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes. Electronic Patient Records (EPRs) and telemedicine are positioned by policymakers as health information technologies that are integral to achieving improved clinical outcomes and efficiency savings. However, evaluating the extent to which these aims are met poses distinct evaluation challenges, particularly where clinical and cost outcomes form the sole focus of evaluation design. We propose that a practice-centred approach to evaluation - in which those whose day-to-day care practice is altered (or not) by the introduction of new technologies are placed at the centre of evaluation efforts - can complement and in some instances offer advantages over, outcome-centric evaluation models. We carried out a regional programme of innovation in renal services where a participative approach was taken to the introduction of new technologies, including: a regional EPR system and a system to support video clinics. An 'action learning' approach was taken to procurement, pre-implementation planning, implementation, ongoing development and evaluation. Participants included clinicians, technology specialists, patients and external academic researchers. Whilst undergoing these

  14. Technology transfer - insider protection workshop (Safeguards Evaluation Method - Insider Threat)

    International Nuclear Information System (INIS)

    Strait, R.S.; Renis, T.A.

    1986-01-01

    The Safeguards Evaluation Method - Insider Threat, developed by Lawrence Livermore National Laboratory, is a field-applicable tool to evaluate facility safeguards against theft or diversion of special nuclear material (SNM) by nonviolent insiders. To ensure successful transfer of this technology from the laboratory to DOE field offices and contractors, LLNL developed a three-part package. The package includes a workbook, user-friendly microcomputer software, and a three-day training program. The workbook guides an evaluation team through the Safeguards Evaluation Method and provides forms for gathering data. The microcomputer software assists in the evaluation of safeguards effectiveness. The software is designed for safeguards analysts with no previous computer experience. It runs on an IBM Personal Computer or any compatible machine. The three-day training program is called the Insider Protection Workshop. The workshop students learn how to use the workbook and the computer software to assess insider vulnerabilities and to evaluate the benefits and costs of potential improvements. These activities increase the students' appreciation of the insider threat. The workshop format is informal and interactive, employing four different instruction modes: classroom presentations, small-group sessions, a practical exercise, and ''hands-on'' analysis using microcomputers. This approach to technology transfer has been successful: over 100 safeguards planners and analysts have been trained in the method, and it is being used at facilities through the DOE complex

  15. End-User Evaluations of Semantic Web Technologies

    Energy Technology Data Exchange (ETDEWEB)

    McCool, Rob; Cowell, Andrew J.; Thurman, David A.

    2005-11-07

    Stanford University's Knowledge Systems Laboratory (KSL) is working in partnership with Battelle Memorial Institute and IBM Watson Research Center to develop a suite of technologies for information extraction, knowledge representation & reasoning, and human-information interaction, in unison entitled 'Knowledge Associates for Novel Intelligence' (KANI). We have developed an integrated analytic environment composed of a collection of analyst associates, software components that aid the user at different stages of the information analysis process. An important part of our participatory design process has been to ensure our technologies and designs are tightly integrate with the needs and requirements of our end users, To this end, we perform a sequence of evaluations towards the end of the development process that ensure the technologies are both functional and usable. This paper reports on that process.

  16. The Steam Turbine: Technical Terminology Bulletin. Terminotech, Vol. 2, No. 4.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to the steam turbine. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  17. The Moving-Coil Ammeter: Technical Terminology Bulletin. Terminotech, Vol. 2, No. 8.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to the moving-coil ammeter. A brief narrative on the subject is presented in both French and English. A English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  18. Hydraulic Turbines: The Francis Turbine. Technical Terminology Bulletin. Terminotech, Vol. 2, No. 2.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to the Francis turbine. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. An explanatory illustration is appended. (JB)

  19. Hydraulic Turbines: The Pelton Turbine. Technical Terminology Bulletin. Terminotech, Vol. 2, No. 3.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to the Pelton turbine. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  20. ONR (Office of Naval Research) Far East Scientific Bulletin. Volume 10, Number 1, January to March 1985.

    Science.gov (United States)

    1985-03-01

    diagnosis of troubles in diesel locomotives , which contains over 1200 rules (Bonissone and Johnson, 1984). To use the ANTICIPATOR system for prescribing...Scientific Bulletin, 9,(3) 1 (1984). "DELTA: An Expert System for Diesel Electric Locomotive Repair," Bonissone, P.P., and Johnson, H.E. (Jr...technology ocean development technology bionics technology new materials technology electronics technology space technology peaceful utilization

  1. IDRC Bulletin #125

    International Development Research Centre (IDRC) Digital Library (Canada)

    Mobile phones, Internet, and gender in Myanmar Women in Myanmar are 29% less likely than men to own a mobile phone. This mobile gender gap is explored in an IDRC-supported LIRNEasia survey that identifies the economic and cultural factors limiting women's access to and use of mobile technology in Myanmar.

  2. Bulletin June. 2004

    African Journals Online (AJOL)

    highest coverage was cholera. Cholera outbreaks were frequently reported from the 3 districts in Dar es Salaam Region. Other epidemic-prone diseases received very little coverage. These included meningitis and rabies. With globalisation and high technological information systems, reports of disease outbreaks are more ...

  3. Development of in-pile test and evaluation technology

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Yung Hwan; Park, Jong Man; Joo, Kee Nam; Park, Duk Keun; Park, Se Jin; Oh, Jong Myung; Kim, Tae Ryong; Park Jin Suk; Lee, Jae Han [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-08-01

    To develop the in-pile test and evaluation technologies using KMRR, basic design of instrumented capsule and auxiliary system for material irradiation test and the related studies are performed. First, reactor and test hole characteristics are summarized, and conceptual design requirements of capsule to KMRR are reviewed. And fundamental principles and criteria for the instrumented capsule design are summarized. Basic design and analysis of instrumented capsule are performed, and design of capsule supporting system are also performed and structural integrity of the system is analyzed. Based on the prior studies, test mock-ups are designed and manufactured, and thermohydraulic and vibration tests are prepared. And, as in-pile test evaluation technologies, KMRR neutron dosimetry and mechanical tests related to material irradiation are investigated. 67 figs, 30 tabs, 41 refs. (Author).

  4. Technical evaluation: pressurized fluidized-bed combustion technology

    Energy Technology Data Exchange (ETDEWEB)

    Miller, S A; Vogel, G J; Gehl, S M; Hanway, Jr, J E; Henry, R F; Parker, K M; Smyk, E B; Swift, W M; Podolski, W F

    1982-04-01

    The technology of pressurized fluidized-bed combustion, particularly in its application to a coal-burning combined-cycle plant, is evaluated by examining the technical status of advanced-concept plant components - boiler system (combustor, air-handling and air-injection equipment, and heat exchangers); solids handling, injection, and ejection system; hot-gas cleanup equipment; instrumentation/control system; and the gas turbine - along with materials of plant construction. Environmental performance as well as energy efficiency are examined, and economic considerations are reviewed briefly. The evaluation concludes with a broad survey of the principal related research and development programs in the United States and other countries, a foreview of the most likely technological developments, and a summary of unresolved technical issues and problems.

  5. Supercritical Wing Technology: A Progress Report on Flight Evaluations

    Science.gov (United States)

    1972-01-01

    The papers in this compilation were presented at the NASA Symposium on "Supercritical Wing Technology: A Progress Report on Flight Evaluation" held at the NASA Flight Research Center, Edwards, Calif., on February 29, 1972. The purpose of the symposium was to present timely information on flight results obtained with the F-8 and T-2C supercritical wing configurations, discuss comparisons with wind-tunnel predictions, and project [ ] flight programs planned for the F-8 and F-III (TACT) airplanes.

  6. EVALUATION OF ADAPTATIVE RESOURCES OF CHILDREN WITH MODERN AUTOMATED TECHNOLOGY

    OpenAIRE

    V.N. Luchaninova; L.V. Trankovskaya; E.A. Kosnitskaya

    2008-01-01

    Adaptative resources of children's organisms at the time of their entrance to school were evaluated with modern automated technology — the method of computer dermographia (KD). Significant risk factors of negative course of adaptative process were determined. High self descriptiveness of KD for integral estimation of state of health at the time of adaptation of children to the school conditions was demonstrated. The scheme of prophylactic measures was developed for the purpose of improvement ...

  7. Evaluating HDR photos using Web 2.0 technology

    Science.gov (United States)

    Qiu, Guoping; Mei, Yujie; Duan, Jiang

    2011-01-01

    High dynamic range (HDR) photography is an emerging technology that has the potential to dramatically enhance the visual quality and realism of digital photos. One of the key technical challenges of HDR photography is displaying HDR photos on conventional devices through tone mapping or dynamic range compression. Although many different tone mapping techniques have been developed in recent years, evaluating tone mapping operators prove to be extremely difficult. Web2.0, social media and crowd-sourcing are emerging Internet technologies which can be harnessed to harvest the brain power of the mass to solve difficult problems in science, engineering and businesses. Paired comparison is used in the scientific study of preferences and attitudes and has been shown to be capable of obtaining an interval-scale ordering of items along a psychometric dimension such as preference or importance. In this paper, we exploit these technologies for evaluating HDR tone mapping algorithms. We have developed a Web2.0 style system that enables Internet users from anywhere to evaluate tone mapped HDR photos at any time. We adopt a simple paired comparison protocol, Internet users are presented a pair of tone mapped images and are simply asked to select the one that they think is better or click a "no difference" button. These user inputs are collected in the web server and analyzed by a rank aggregation algorithm which ranks the tone mapped photos according to the votes they received. We present experimental results which demonstrate that the emerging Internet technologies can be exploited as a new paradigm for evaluating HDR tone mapping algorithms. The advantages of this approach include the potential of collecting large user inputs under a variety of viewing environments rather than limited user participation under controlled laboratory environments thus enabling more robust and reliable quality assessment. We also present data analysis to correlate user generated qualitative

  8. Technology development, evaluation, and application (TDEA) FY 1997 progress report

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, L.G.

    1998-05-01

    The public expects that the Los Alamos National Laboratory (LANL) will operate in a manner that prevents negative impacts to the environment and protects the safety and health of its employees and the public. To achieve this goal within budget, the Department of Energy (DOE) and LANL must develop new and improved environment, safety, and health (ES and H) technologies and implement innovative, more cost-effective ES and H approaches to operations. In FY95, the Environment, Safety, and Health (ESH) Division initiated a Technology Development, Evaluation, and Application (TDEA) program. The purpose of this unique program is to test and develop technologies that solve LANL ES and H problems and improve the safety of LANL operations. This progress report presents the results of 10 projects funded in FY97 by the TDEA Committee of the Environment, Safety, and Health Division. Products generated from the projects funded in FY97 included implementation of radiation worker dosimetric monitoring systems (two); evaluation and validation of cost-effective animal-tracking systems for environmental studies (two); evaluation of personal protective equipment (two); and development of a method for optimal placement of continuous air monitors in the workplace.

  9. Technology development, evaluation, and application (TDEA) FY 1997 progress report

    International Nuclear Information System (INIS)

    Hoffman, L.G.

    1998-05-01

    The public expects that the Los Alamos National Laboratory (LANL) will operate in a manner that prevents negative impacts to the environment and protects the safety and health of its employees and the public. To achieve this goal within budget, the Department of Energy (DOE) and LANL must develop new and improved environment, safety, and health (ES and H) technologies and implement innovative, more cost-effective ES and H approaches to operations. In FY95, the Environment, Safety, and Health (ESH) Division initiated a Technology Development, Evaluation, and Application (TDEA) program. The purpose of this unique program is to test and develop technologies that solve LANL ES and H problems and improve the safety of LANL operations. This progress report presents the results of 10 projects funded in FY97 by the TDEA Committee of the Environment, Safety, and Health Division. Products generated from the projects funded in FY97 included implementation of radiation worker dosimetric monitoring systems (two); evaluation and validation of cost-effective animal-tracking systems for environmental studies (two); evaluation of personal protective equipment (two); and development of a method for optimal placement of continuous air monitors in the workplace

  10. Sources of Infrasound events listed in IDC Reviewed Event Bulletin

    Science.gov (United States)

    Bittner, Paulina; Polich, Paul; Gore, Jane; Ali, Sherif; Medinskaya, Tatiana; Mialle, Pierrick

    2017-04-01

    Until 2003 two waveform technologies, i.e. seismic and hydroacoustic were used to detect and locate events included in the International Data Centre (IDC) Reviewed Event Bulletin (REB). The first atmospheric event was published in the REB in 2003, however automatic processing required significant improvements to reduce the number of false events. In the beginning of 2010 the infrasound technology was reintroduced to the IDC operations and has contributed to both automatic and reviewed IDC bulletins. The primary contribution of infrasound technology is to detect atmospheric events. These events may also be observed at seismic stations, which will significantly improve event location. Examples sources of REB events, which were detected by the International Monitoring System (IMS) infrasound network were fireballs (e.g. Bangkok fireball, 2015), volcanic eruptions (e.g. Calbuco, Chile 2015) and large surface explosions (e.g. Tjanjin, China 2015). Query blasts (e.g. Zheleznogorsk) and large earthquakes (e.g. Italy 2016) belong to events primarily recorded at seismic stations of the IMS network but often detected at the infrasound stations. In case of earthquakes analysis of infrasound signals may help to estimate the area affected by ground vibration. Infrasound associations to query blast events may help to obtain better source location. The role of IDC analysts is to verify and improve location of events detected by the automatic system and to add events which were missed in the automatic process. Open source materials may help to identify nature of some events. Well recorded examples may be added to the Reference Infrasound Event Database to help in analysis process. This presentation will provide examples of events generated by different sources which were included in the IDC bulletins.

  11. Contribution of Infrasound to IDC Reviewed Event Bulletin

    Science.gov (United States)

    Bittner, Paulina; Polich, Paul; Gore, Jane; Ali, Sherif Mohamed; Medinskaya, Tatiana; Mialle, Pierrick

    2016-04-01

    Until 2003 two waveform technologies, i.e. seismic and hydroacoustic were used to detect and locate events included in the International Data Centre (IDC) Reviewed Event Bulletin (REB). The first atmospheric event was published in the REB in 2003 but infrasound detections could not be used by the Global Association (GA) Software due to the unmanageable high number of spurious associations. Offline improvements of the automatic processing took place to reduce the number of false detections to a reasonable level. In February 2010 the infrasound technology was reintroduced to the IDC operations and has contributed to both automatic and reviewed IDC bulletins. The primary contribution of infrasound technology is to detect atmospheric events. These events may also be observed at seismic stations, which will significantly improve event location. Examples of REB events, which were detected by the International Monitoring System (IMS) infrasound network were fireballs (e.g. Bangkok fireball, 2015), volcanic eruptions (e.g. Calbuco, Chile 2015) and large surface explosions (e.g. Tjanjin, China 2015). Query blasts and large earthquakes belong to events primarily recorded at seismic stations of the IMS network but often detected at the infrasound stations. Presence of infrasound detection associated to an event from a mining area indicates a surface explosion. Satellite imaging and a database of active mines can be used to confirm the origin of such events. This presentation will summarize the contribution of 6 years of infrasound data to IDC bulletins and provide examples of events recorded at the IMS infrasound network. Results of this study may help to improve location of small events with observations on infrasound stations.

  12. SURVIAC Bulletin, Issue 1

    Science.gov (United States)

    2013-01-01

    Assistant Secretary of Defense for Research and Engineering (ASD(R&E)), formerly DDR &E, to ensure the IACs best met the ever-changing research and...C-130 Wing Hydrodynamic Ram Evaluation Program with ballistic test planning, test site support, data archiving and analysis and test reporting...This program evaluated the vulnerability of C-130 aircraft to threat-induced hydrodynamic ram in wing fuel tanks. He also provided support for the C

  13. International bulletin on atomic and molecular data for fusion

    International Nuclear Information System (INIS)

    Stephens, J.A.; Bannister, M.E.; Fuhr, J.

    1999-12-01

    The International Bulletin on Atomic and Molecular Data for Fusion is prepared by the Atomic and Molecular Data Unit of the International Atomic Energy Agency. It is distributed free of charge by the IAEA to assist in the development of fusion research and technology. In part 1, the Atomic and Molecular Data Information System (AMDIS) is presented. In Part 2, the indexed papers are listed separately for structure and spectra, atomic and molecular collisions and surface interactions. Part 3 contains all the bibliographic data for both the indexed and non-indexed references. Finally, the Author Index (part 4) refers to the bibliographic references contained in part 3

  14. Design and evaluation of the ONC health information technology curriculum.

    Science.gov (United States)

    Mohan, Vishnu; Abbott, Patricia; Acteson, Shelby; Berner, Eta S; Devlin, Corkey; Hammond, William E; Kukafka, Rita; Hersh, William

    2014-01-01

    As part of the Heath Information Technology for Economic and Clinical Health (HITECH) Act, the Office of the National Coordinator for Health Information Technology (ONC) implemented its Workforce Development Program, which included initiatives to train health information technology (HIT) professionals in 12 workforce roles, half of them in community colleges. To achieve this, the ONC tasked five universities with established informatics programs with creating curricular materials that could be used by community colleges. The five universities created 20 components that were made available for downloading from the National Training and Dissemination Center (NTDC) website. This paper describes an evaluation of the curricular materials by its intended audience of educators. We measured the quantity of downloads from the NTDC site and administered a survey about the curricular materials to its registered users to determine use patterns and user characteristics. The survey was evaluated using mixed methods. Registered users downloaded nearly half a million units or components from the NTDC website. We surveyed these 9835 registered users. 1269 individuals completed all or part of the survey, of whom 339 identified themselves as educators (26.7% of all respondents). This paper addresses the survey responses of educators. Successful aspects of the curriculum included its breadth, convenience, hands-on and course planning capabilities. Several areas were identified for potential improvement. The ONC HIT curriculum met its goals for community college programs and will likely continue to be a valuable resource for the larger informatics community in the future.

  15. An evaluation approach for research project pilot technological applications

    Science.gov (United States)

    Marcelino-Jesus, Elsa; Sarraipa, Joao; Jardim-Goncalves, Ricardo

    2013-10-01

    In a world increasingly more competitive and in a constantly development and growth it's important that companies have economic tools, like frameworks to help them to evaluate and validate the technology development to better fits in each company particular needs. The paper presents an evaluation approach for research project pilot applications to stimulate its implementation and deployment, increasing its adequacy and acceptance to their stakeholders and consequently providing new business profit and opportunities. Authors used the DECIDE evaluation framework as a major guide to this approach, which was tested in the iSURF project to support the implementation of an interoperability service utility for collaborative supply chain planning across multiple domains supported by RFID devices.

  16. Compendium of structure and collision data in the first 12 issues of the international bulletin on atomic and molecular data for fusion

    International Nuclear Information System (INIS)

    Katsonis, K.; Rumble, J. Jr.

    1980-06-01

    This document is a compendium of the structure, spectra and collision data in the first 12 issues of the International Bulletin on Atomic and Molecular Data for Fusion. The Bulletin is issued quarterly by the International Atomic Energy Agency to assist the development of fusion research and technology. Not included in this compendium are those parts of the Bulletin concerned with Surface Effects, Work in Progress, Contributed Numerical Data, and Data Requests. Where necessary, corrections have been made to the data previously published to make the compendium as accurate as possible. The editors would appreciate any information on errors, duplications or omissions which would make future compendia more accurate and useful. (author)

  17. EVALUATION OF VADOSE ZONE TREATMENT TECHNOLOGIES TO IMMOBILIZE TECHNETIUM-99

    Energy Technology Data Exchange (ETDEWEB)

    PETERSEN, S.W.

    2006-03-15

    The Hanford Site End State Vision document (DOE/RL-2003-59) states: ''There should be an aggressive plan to develop technology for remediation of the contamination that could get to the groundwater (particularly the technetium [{sup 99}Tc])''. In addition, there is strong support from the public and regulatory agencies for the above statement, with emphasis on investigation of treatment alternatives. In July 2004, PNNL completed a preliminary evaluation of remediation technologies with respect to their effectiveness and implementability for immobilization of {sup 99}Tc beneath the BC Cribs in the 200 West Area (Truex, 2004). As a result of this evaluation, PNNL recommended treatability testing of in situ soil desiccation, because it has the least uncertainty of those technologies evaluated in July 2004 (Treatability Test Outline, September 30, 2004). In 2005, DOE-RL and Fluor Hanford convened an independent technical panel to review alternative remediation technologies, including desiccation, at a three-day workshop in Richland, Washington. The panel was composed of experts in vadose-zone transport, infiltration control, hydrology, geochemistry, environmental engineering, and geology. Their backgrounds include employment in academia, government laboratories, industry, and consulting. Their review, presented in this document, is based upon written reports from Hanford, oral presentations from Hanford staff, and each panel members' years of experience in their particular field of expertise. The purpose of this report is to document the panel's evaluation of various treatment alternatives with potential for minimizing contaminant migration in the deep vadose zone at the Department of Energy Hanford Site. The panel was tasked with assessing the most viable and practical approach and making recommendations for testing. The evaluation of vadose-zone treatment alternatives was conducted to be broadly applicable at a variety of locations at

  18. A reflexive evaluation of technology-enhanced learning

    Directory of Open Access Journals (Sweden)

    Suzanne Young

    2017-11-01

    Full Text Available This article explores the lived experiences of two academics in a UK Higher Education Institution who have embedded digital learning approaches within their curriculum delivery. Achieving student excellence can be impeded by a lack of engagement and sense of identity on large courses. Digital learning strategies can offer opportunities to overcome these challenges by empowering students to engage self-confidently. Through an evaluation of the authors’ own experiences of using social media, polling and web-conferencing software, the article shows how interacting with students via a range of learning technologies can create more inclusive and engaging learning environments. Including feedback from students within this article provides evidence that diversification of communication within teaching and learning practice gives students more choice and opportunity to interact with both their peers and teaching staff. The article concludes with recommendations for embedding technology, whilst acknowledging the well-established value of face-to-face interaction.

  19. Evaluation of airborne thermal, magnetic, and electromagnetic characterization technologies

    Energy Technology Data Exchange (ETDEWEB)

    Josten, N.E.

    1992-03-01

    The identification of Buried Structures (IBS) or Aerial Surveillance Project was initiated by the US Department of Energy (DOE) Office of Technology Development to demonstrate airborne methods for locating and identifying buried waste and ordnance at the Idaho National Engineering Laboratory (INEL). Two technologies were demonstrated: (a) a thermal infrared imaging system built by Martin Marietta Missile Systems and (b) a magnetic and electromagnetic (EM) geophysical surveying system operated by EBASCO Environmental. The thermal system detects small differences in ground temperature caused by uneven heating and cooling of the ground by the sun. Waste materials on the ground can be detected when the temperature of the waste is different than the background temperature. The geophysical system uses conventional magnetic and EM sensors. These sensors detect disturbances caused by magnetic or conductive waste and naturally occurring magnetic or conductive features of subsurface soils and rock. Both systems are deployed by helicopter. Data were collected at four INEL sites. Tests at the Naval Ordnance Disposal Area (NODA) were made to evaluate capabilities for detecting ordnance on the ground surface. Tests at the Cold Simulated Waste Demonstration Pit were made to evaluate capabilities for detecting buried waste at a controlled site, where the location and depth of buried materials are known. Tests at the Subsurface Disposal Area and Stationary Low-Power Reactor-1 burial area were made to evaluate capabilities for characterizing hazardous waste at sites that are typical of DOE buried waste sites nationwide.

  20. Evaluation of airborne thermal, magnetic, and electromagnetic characterization technologies

    International Nuclear Information System (INIS)

    Josten, N.E.

    1992-03-01

    The identification of Buried Structures (IBS) or Aerial Surveillance Project was initiated by the US Department of Energy (DOE) Office of Technology Development to demonstrate airborne methods for locating and identifying buried waste and ordnance at the Idaho National Engineering Laboratory (INEL). Two technologies were demonstrated: (a) a thermal infrared imaging system built by Martin Marietta Missile Systems and (b) a magnetic and electromagnetic (EM) geophysical surveying system operated by EBASCO Environmental. The thermal system detects small differences in ground temperature caused by uneven heating and cooling of the ground by the sun. Waste materials on the ground can be detected when the temperature of the waste is different than the background temperature. The geophysical system uses conventional magnetic and EM sensors. These sensors detect disturbances caused by magnetic or conductive waste and naturally occurring magnetic or conductive features of subsurface soils and rock. Both systems are deployed by helicopter. Data were collected at four INEL sites. Tests at the Naval Ordnance Disposal Area (NODA) were made to evaluate capabilities for detecting ordnance on the ground surface. Tests at the Cold Simulated Waste Demonstration Pit were made to evaluate capabilities for detecting buried waste at a controlled site, where the location and depth of buried materials are known. Tests at the Subsurface Disposal Area and Stationary Low-Power Reactor-1 burial area were made to evaluate capabilities for characterizing hazardous waste at sites that are typical of DOE buried waste sites nationwide

  1. Annual market and own load bulletin - 1992

    International Nuclear Information System (INIS)

    1993-01-01

    This bulletin makes the market analysis for electric energy in Brazil in 1992, presenting data about energy consumption in each Brazilian region and the prices of electric power and petroleum products. (M.V.M.)

  2. ICPP radioactive liquid and calcine waste technologies evaluation. Interim report

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, J.A.; Pincock, L.F.; Christiansen, I.N.

    1994-06-01

    The Department of Energy (DOE) has received spent nuclear fuel (SNF) at the Idaho Chemical Processing Plant (ICPP) for interim storage since 1951 and reprocessing since 1953. Until recently, the major activity of the ICPP has been the reprocessing of SNF to recover fissile uranium; however, changing world events have raised questions concerning the need to recover and recycle this material. In April 1992, DOE chose to discontinue reprocessing SNF for uranium recovery and shifted its focus toward the management and disposition of radioactive wastes accumulated through reprocessing activities. Currently, 1.8 million gallons of radioactive liquid wastes (1.5 million gallons of radioactive sodium-bearing liquid wastes and 0.3 million gallons of high-level liquid waste) and 3,800 cubic meters (m{sup 3}) of calcine waste are in inventory at the ICPP. Legal drivers and agreements exist obligating the INEL to develop, demonstrate, and implement technologies for safe and environmentally sound treatment and interim storage of radioactive liquid and calcine waste. Candidate treatment processes and waste forms are being evaluated using the Technology Evaluation and Analysis Methodology (TEAM) Model. This process allows decision makers to (1) identify optimum radioactive waste treatment and disposal form alternatives; (2) assess tradeoffs between various optimization criteria; (3) identify uncertainties in performance parameters; and (4) focus development efforts on options that best satisfy stakeholder concerns. The Systems Analysis technology evaluation presented in this document supports the DOE in selecting the most effective radioactive liquid and calcine waste management plan to implement in compliance with established regulations, court orders, and agreements.

  3. Design and Evaluation of an Instructional Solar Energy Technologies Lab

    Directory of Open Access Journals (Sweden)

    Christina B. Class

    2011-09-01

    Full Text Available This paper presents a design for a solar energy lab that allows students to plan, install and evaluate different system architectures and gain relevant practical experiences. The addressed learning outcomes are analyzed based on the 13 learning outcomes defined by the Accreditation Board for Engineering and Technology (ABET as well as based on the taxonomy levels of the cognitive domain after Bloom. In this paper we present a sample lab assignment and map its tasks to the learning outcomes and cognitive domains. First results of qualitative student feedback are equally presented.

  4. [Health Technology Assessment--evaluating health care interventions].

    Science.gov (United States)

    Wild, Claudia; Gartlehner, Gerald

    2008-01-01

    The evaluation of health interventions has become internationally known as Health Technology Assessment (HTA) and has received increased attention as an instrument for supporting policy decisions in health care in recent years. HTA is a multidisciplinary process that summarises information about the medical, social, economic and ethical issues related to the use of new, and established health interventions in a systematic, transparent, unbiased, robust manner. HTA strives to provide pertinent information to help formulate safe and effective health policies that focus on the patient while aiming to achieve the best use of assets available.

  5. Evaluation of demonstration technologies: Quail creek water supply system

    International Nuclear Information System (INIS)

    1993-02-01

    The U.S. EPA is currently demonstrating central and household treatment units at several sites in the U.S. The Quail Creek System near Spicewood, Texas is one of these sites where the technology demonstration program is scheduled to be completed soon as part of the EPA's Office of Ground Water and Drinking Water demonstration initiative. The report provides a summary of the small system demonstration project and presents an evaluation of the information collected during the operation, and by the EPA in September 1992

  6. Information technology model for evaluating emergency medicine teaching

    Science.gov (United States)

    Vorbach, James; Ryan, James

    1996-02-01

    This paper describes work in progress to develop an Information Technology (IT) model and supporting information system for the evaluation of clinical teaching in the Emergency Medicine (EM) Department of North Shore University Hospital. In the academic hospital setting student physicians, i.e. residents, and faculty function daily in their dual roles as teachers and students respectively, and as health care providers. Databases exist that are used to evaluate both groups in either academic or clinical performance, but rarely has this information been integrated to analyze the relationship between academic performance and the ability to care for patients. The goal of the IT model is to improve the quality of teaching of EM physicians by enabling the development of integrable metrics for faculty and resident evaluation. The IT model will include (1) methods for tracking residents in order to develop experimental databases; (2) methods to integrate lecture evaluation, clinical performance, resident evaluation, and quality assurance databases; and (3) a patient flow system to monitor patient rooms and the waiting area in the Emergency Medicine Department, to record and display status of medical orders, and to collect data for analyses.

  7. The new Bulletin arrives in two weeks

    CERN Multimedia

    2006-01-01

    In May, you will discover a redesigned CERN Bulletin. Starting with the first May issue (No. 19-20/2006), the format of the CERN Bulletin will change completely. The page layout will be more attractive, reminiscent of a proper newspaper, with pictograms to identify the different sections. The information provided will also be more visible. The Bulletin was much in need of a makeover as its current layout dates back to 1976! The introduction of the new format will coincide with the introduction of a new means of distribution. You will still receive the elctronic version of the Bulletin every week directly on your computer. However, in order to avoid the waste from the dozens of copies that linger unread in people's mailboxes, the paper version will be available at a series of distribution points around the Laboratory. You will find the Bulletin along with the Staff Association newsletter at the cafeteria closest to your office. The Bulletin will be available from the following distribution points: On the M...

  8. The redesigned Bulletin is on its way

    CERN Multimedia

    2006-01-01

    In May, you will discover a redesigned CERN Bulletin. Starting with the first May issue (No. 19-20/2006), the format of the Bulletin will change completely. The page layout will be more attractive, reminiscent of a proper newspaper, with pictograms to identify the different sections. The information provided will also be more visible. The Bulletin was much in need of a makeover as its current layout dates back to 1976! The introduction of the new format will coincide with the introduction of a new means of distribution. You will still receive the electronic version of the Bulletin every week directly on your computer. However, in order to avoid the waste from the dozens of copies that linger unread in people's mailboxes, the paper version will be available at a series of distribution points around the Laboratory. You will find the Bulletin along with the Staff Association newsletter at the cafeteria closest to your office. The Bulletin will be available from the following distribution points: On the Meyrin...

  9. Preparing pre-service teachers to integrate technology into K-12 instruction : Evaluation of a technology-infused approach

    NARCIS (Netherlands)

    Admiraal, Wilfried; van Vugt, F.; Kranenburg, F.A.N.; Koster, B.; Smit, Ben; Weijers, Sanne; Lokhorst, Ditte

    2017-01-01

    The quality of how technology is addressed in teacher education programs is conditional for how student teachers apply technology in secondary schools after their graduation. Two technology-infused courses of one teacher education program were evaluated. In line with studies on the development of

  10. Bulletin of Animal Health and Production in Africa: Site Map

    African Journals Online (AJOL)

    Bulletin of Animal Health and Production in Africa: Site Map. Journal Home > About the Journal > Bulletin of Animal Health and Production in Africa: Site Map. Log in or Register to get access to full text downloads.

  11. Bulletin of the Chemical Society of Ethiopia: Site Map

    African Journals Online (AJOL)

    Bulletin of the Chemical Society of Ethiopia: Site Map. Journal Home > About the Journal > Bulletin of the Chemical Society of Ethiopia: Site Map. Log in or Register to get access to full text downloads.

  12. Bulletin of Animal Health and Production in Africa: Journal ...

    African Journals Online (AJOL)

    Bulletin of Animal Health and Production in Africa: Journal Sponsorship. Journal Home > About the Journal > Bulletin of Animal Health and Production in Africa: Journal Sponsorship. Log in or Register to get access to full text downloads.

  13. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Information for Authors. Bulletin of Materials Science. Authors may communicate their research work as papers and rapid communications to the Bulletin of Materials Science. They may also submit topical reviews. We have now switched over to an Editorial Management System.

  14. Evaluation technology of clothing comfortableness; Ifuku tekigosei hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Niwaya, H.

    1999-10-26

    Modern apparel industries are required to supply many kinds of products corresponding to various needs of consumers. Among consumers' needs, comfortableness to wear such as size-fitness is primarily important. To facilitate apparel industries, it is expected to develop a new technology of pattern designing of comfortable garment and measuring garment pressure distribution. Our research is aimed at developing technology that uses computer simulation to predict and evaluate wear comfort, including size suitability, without the need to actually sew up a garment. First, we developed a basic system to predict wearing silhouette, garment pressure, and ease looseness of the garment. Using this system, we carried on the following study. The 3-dimensional distributions of the garment pressure and ease looseness were reversely mapped on the paper pattern in order to indicate the preferable modification. The system was extended for several poses, e.g. twist, bend. From various parameters, we examined the factors of garment pressure and ease looseness. In addition, we selected the parameters for the size-fit indicators and investigated size-fit evaluation indicators. (author)

  15. Technology Education in South Africa: Evaluating an Innovative Pilot Project

    Science.gov (United States)

    Stables, Kay; Kimbell, Richard

    2001-02-01

    Researchers from Goldsmiths College were asked to undertake an evaluation of a three year curriculum initiative introducing technology education, through a learner-centred, problem solving and collaborative approach. The program was developed in a group of high schools in the North West Province of South Africa. We visited ten schools involved in the project and ten parallel schools not involved who acted as a control group. We collected data on student capability (demonstrated through an innovative test activity) and on student attitudes towards technology (demonstrated in evaluation questionnaires and in semi-structured interviews). Collectively the data indicate that in areas of knowledge and skill and in certain aspects of procedures (most notably problem solving) the project has had a marked impact. We also illustrate that greater consideration could have been given in the project to developing skills in generating and developing ideas and in graphic communication. Gender differences are noted, particularly in terms of positive attitudes illustrated by both boys and girls from schools involved in the project. Attention is drawn to the critical impact the project has had on transforming the pedagogy of the teachers from a teacher-centred didactic model, to a learner-centred, problem solving model. Some wider implications of the successes of this project are debated.

  16. ENVIRONMENTAL AND SUSTAINABLE TECHNOLOGY EVALUATION: BIOMASS CO-FIRING IN INDUSTRIAL BOILERS--UNIVERSITY OF IOWA

    Science.gov (United States)

    The U.S. EPA operates the Environmental and Sustainable Technology Evaluation (ESTE) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. This ESTE project involved evaluation of co-firing common woody bio...

  17. DEMONSTRATION OF AQUAFIX AND SAPS PASSIVE MINE WATER TREATMENT TECHNOLOGIES AT SUMMITVILLE MINE SITE, INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated two passive water treatment (PWT) technologies for metals removal from acid mine drainage (AMD) at the Summitville Mine Superfund Site in southern Colorado...

  18. The Meteoritical Bulletin, No. 105

    Science.gov (United States)

    Bouvier, Audrey; Gattacceca, Jérôme; Grossman, Jeffrey; Metzler, Knut

    2017-11-01

    Meteoritical Bulletin 105 contains 2666 meteorites including 12 falls (Aouinet Legraa, Banma, Buritizal, Ejby, Kamargaon, Moshampa, Mount Blanco, Murrili, Osceola, Sariçiçek, Sidi Ali Ou Azza, Stubenberg), with 2244 ordinary chondrites, 142 HED achondrites, 116 carbonaceous chondrites, 37 Lunar meteorites, 20 enstatite chondrites, 20 iron meteorites, 20 ureilites, 19 Martian meteorites, 12 Rumuruti chondrites, 10 primitive achondrites, 9 mesosiderites, 5 angrites, 4 pallasites, 4 ungrouped achondrites, 2 ungrouped chondrites, 1 enstatite achondrite, and 1 relict meteorite, and with 1545 from Antarctica, 686 from Africa, 245 from Asia, 147 from South America, 22 from North America, 14 from Europe, 5 from Oceania, 1 from unknown origin. Note: 5 meteorites from Russia were counted as European. It also includes a list of approved new Dense Collection Areas and a nomenclature of the Aletai (IIIE-an) iron meteorites from Xinjiang, China.

  19. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Search. Search. Bulletin of Materials Science. Title. Author. Keywords. Fulltext. Submit. Bulletin of Materials Science. Current Issue : Vol. 41, Issue 1. Current Issue Volume 41 | Issue 1. February 2018. Home · Volumes & Issues · Special Issues · Forthcoming Issue · Forthcoming ...

  20. Evaluation of Mars CO2 Capture and Gas Separation Technologies

    Science.gov (United States)

    Muscatello, Anthony C.; Santiago-Maldonado, Edgardo; Gibson, Tracy; Devor, Robert; Captain, James

    2011-01-01

    Recent national policy statements have established that the ultimate destination of NASA's human exploration program is Mars. In Situ Resource Utilization (ISRU) is a key technology required to ,enable such missions and it is appropriate to review progress in this area and continue to advance the systems required to produce rocket propellant, oxygen, and other consumables on Mars using the carbon dioxide atmosphere and other potential resources. The Mars Atmospheric Capture and Gas separation project is selecting, developing, and demonstrating techniques to capture and purify Martian atmospheric gases for their utilization for the production of hydrocarbons, oxygen, and water in ISRU systems. Trace gases will be required to be separated from Martian atmospheric gases to provide pure CO2 to processing elements. In addition, other Martian gases, such as nitrogen and argon, occur in concentrations high enough to be useful as buffer gas and should be captured as well. To achieve these goals, highly efficient gas separation processes will be required. These gas separation techniques are also required across various areas within the ISRU project to support various consumable production processes. The development of innovative gas separation techniques will evaluate the current state-of-the-art for the gas separation required, with the objective to demonstrate and develop light-weight, low-power methods for gas separation. Gas separation requirements include, but are not limited to the selective separation of: (1) methane and water from unreacted carbon oxides (C02-CO) and hydrogen typical of a Sabatier-type process, (2) carbon oxides and water from unreacted hydrogen from a Reverse Water-Gas Shift process, (3)/carbon oxides from oxygen from a trash/waste processing reaction, and (4) helium from hydrogen or oxygen from a propellant scavenging process. Potential technologies for the separations include' freezers, selective membranes, selective solvents, polymeric sorbents

  1. Enhanced Geothermal Systems (EGS) well construction technology evaluation report.

    Energy Technology Data Exchange (ETDEWEB)

    Capuano, Louis, Jr. (Thermasource Inc.); Huh, Michael; Swanson, Robert (Thermasource Inc.); Raymond, David Wayne; Finger, John Travis; Mansure, Arthur James; Polsky, Yarom; Knudsen, Steven Dell

    2008-12-01

    Electricity production from geothermal resources is currently based on the exploitation of hydrothermal reservoirs. Hydrothermal reservoirs possess three ingredients critical to present day commercial extraction of subsurface heat: high temperature, in-situ fluid and high permeability. Relative to the total subsurface heat resource available, hydrothermal resources are geographically and quantitatively limited. A 2006 DOE sponsored study led by MIT entitled 'The Future of Geothermal Energy' estimates the thermal resource underlying the United States at depths between 3 km and 10 km to be on the order of 14 million EJ. For comparison purposes, total U.S. energy consumption in 2005 was 100 EJ. The overwhelming majority of this resource is present in geological formations which lack either in-situ fluid, permeability or both. Economical extraction of the heat in non-hydrothermal situations is termed Enhanced or Engineered Geothermal Systems (EGS). The technologies and processes required for EGS are currently in a developmental stage. Accessing the vast thermal resource between 3 km and 10 km in particular requires a significant extension of current hydrothermal practice, where wells rarely reach 3 km in depth. This report provides an assessment of well construction technology for EGS with two primary objectives: (1) Determining the ability of existing technologies to develop EGS wells. (2) Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics. Towards these ends, a methodology is followed in which a case study is developed to systematically and quantitatively evaluate EGS well construction technology needs. A baseline EGS well specification is first formulated. The steps, tasks and tools involved in the construction of this prospective baseline EGS well are then explicitly defined by a geothermal drilling contractor in terms of sequence, time and

  2. Informal Evaluation and Institutionalization of Neoteric Technology Ideas

    DEFF Research Database (Denmark)

    Ulrich, Frank; Mengiste, Shegaw Anagaw; Müller, Sune Dueholm

    2015-01-01

    in existing institutionalized technologies within the organization and that emerging technologies introduce neoteric ideas to the organization. Furthermore, we argue that when attempting to introduce technology-based ideas, human actors will focus their attention on ideas embedded in existing...... theories of creativity, Scandinavian institutionalism, and empirical data from two Danish organizations, this article investigates the interplay between creativity, technology, and human sensemaking in the process of translating and transforming technology ideas into full-fledged technological innovations....

  3. NASA Technology Evaluation for Environmental Risk Mitigation Remediation Technology Collaboration Development

    Science.gov (United States)

    Romeo, James

    2013-01-01

    NASA is committed to finding solutions to agency cleanup problems that are better, cheaper, and more effective than the status quo. Unfortunately, some potential solutions involve innovative technologies for which NASA remediation managers may not have a high level of understanding or confidence. Since 2004, NASA's Stennis Space Center (SSC) in Mississippi has been pumping groundwater contaminated with trichloroethylene (TCE) and other halogenated volatile organic compounds (HVOC) from their cleanup location designated "Area G" through extraction wells to an aboveground treatment system. Over time, however, the effectiveness of this treatment strategy has diminished and an alternative approach is needed. In 2012, professionals from NASA's Principal Center for Technology Evaluation for Environmental Risk Mitigation (TEERM) introduced SSC managers to an innovative technology for enhancing the performance of SSC's existing pump and treat system. The technology, generally referred to as in situ chemical oxidation (ISCO), involves slowly and continuously injecting a strong but safe chemical oxidant into the groundwater. Treatment is enhanced by a "surfactant-type effect" which causes residual contamination from saturated soil to be released into the dissolved-phase where it can be readily oxidized. Any dissolved-phase contamination that was not oxidized can be collected by the extraction well network and treated aboveground. SSC was not familiar with the technology so to increase their confidence, TEERM identified a contractor who was willing to demonstrate their product and process at a significantly reduced price. An initial, small-scale demonstration of ISCO began at sse in March 2012 and completed in August 2012. This successful demonstration was followed by three larger-scale ISCO demonstrations between August and December 2012. The contractor's innovative Continuous Injection System (CIS) incorporated "green" and sustainable technologies and practices. A slow

  4. Life cycle evaluation of emerging lignocellulosic ethanol conversion technologies.

    Science.gov (United States)

    Spatari, Sabrina; Bagley, David M; MacLean, Heather L

    2010-01-01

    Lignocellulosic ethanol holds promise for addressing climate change and energy security issues associated with personal transportation through lowering the fuel mixes' carbon intensity and petroleum demand. We compare the technological features and life cycle environmental impacts of near- and mid-term ethanol bioconversion technologies in the United States. Key uncertainties in the major processes: pre-treatment, hydrolysis, and fermentation are evaluated. The potential to reduce fossil energy use and greenhouse gas (GHG) emissions varies among bioconversion processes, although all options studied are considerably more attractive than gasoline. Anticipated future performance is found to be considerably more attractive than that published in the literature as being achieved to date. Electricity co-product credits are important in characterizing the GHG impacts of different ethanol production pathways; however, in the absence of near-term liquid transportation fuel alternatives to gasoline, optimizing ethanol facilities to produce ethanol (as opposed to co-products) is important for reducing the carbon intensity of the road transportation sector and for energy security.

  5. Risk-benefit evaluation for large technological systems

    International Nuclear Information System (INIS)

    Okrent, D.

    1979-01-01

    The related topics of risk-benefit analysis, risk analysis, and risk-acceptance criteria (How safe is safe enough) are of growing importance. An interdisciplinary study on various aspects of these topics, including applications to nuclear power, was recently completed at the University of California, Los Angeles (UCLA), with the support of the National Science Foundation. In addition to more than 30 topical reports and various open-literature publications, a final report (UCLA-ENG-7777) to the study, titled ''A Generalized Evaluation Approach to Risk--Benefit for Large Technological Systems and Its Application to Nuclear Power'', was issued in early 1978. This article briefly summarizes portions of the final report dealing with general aspects of risk-benefit methodology, societal knowledge and perception of risk, and risk-acceptance criteria

  6. Technology development for evaluation of operational quantities in radiation protection

    International Nuclear Information System (INIS)

    Jang, Si Young; Lee, T. Y.; Kim, B. H.

    2003-03-01

    Korean government recently published a national regulation on the internal exposure monitoring and dose evaluation (internal dosimetry) based on the most recent ICRP recommendation 60 and subsequent publications, which supercede the former ICRP recommendation 26 and publication 30, on which the internal dosimetry practice in Korea had been based so far. Consequently, this project, according to the demand from both government and nuclear industry, had been launched to develop a user-friendly computer code on internal dosimetry adopting the most up to date ICRP biokinetic and dosimetric model to resolve the difficulties and problems faced to nuclear industry and to develop related technology. The reliability of this code, named as BiDAS, as a result of several benchmark calculations for self assurance appeared to be excellent comparing with the foreign computer code. This computer code is expected to be successfully utilized in nuclear industry and related fields in complying with the national regulation on internal dosimetry program started from late 2003. Reference low level gamma(γ) radiation field for calibration of environmental radiation(γ) monitor and reference neutron field for calibration of n monitoring equipment have been established and characterized. International cross comparison of these reference radiation fields have been performed and radiation response of various radiation monitoring instrument has been tested by using these reference radiation fields. A technology which can directly measure the radiation quality factor and tissue absorbed dose has been established to evaluate the neutron dose in terms of operational quantity in the unknown mixed n-γ radiation field. Spherical and cylindrical TEPC systems have been designed and manufactured and a portable TEPC system to measure the neutron quality and dose in the real work field has been developed and tested in accelerator laboratory

  7. Development of evaluation and performance verification technology for radiotherapy radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. Y.; Jang, S. Y.; Kim, B. H. and others

    2005-02-15

    No matter how much the importance is emphasized, the exact assessment of the absorbed doses administered to the patients to treat the various diseases such as lately soaring malignant tumors with the radiotherapy practices is the most important factor. In reality, several over-exposed patients from the radiotherapy practice become very serious social issues. Especially, the development of a technology to exactly assess the high doses and high energies (In general, dose administered to the patients with the radiotherapy practices are very huge doses, and they are about three times higher than the lethal doses) generated by the radiation generators and irradiation equipment is a competing issue to be promptly conducted. Over fifty medical centers in Korea operate the radiation generators and irradiation equipment for the radiotherapy practices. However, neither the legal and regulatory systems to implement a quality assurance program are sufficiently stipulated nor qualified personnel who could run a program to maintain the quality assurance and control of those generators and equipment for the radiotherapy practices in the medical facilities are sufficiently employed. To overcome the above deficiencies, a quality assurance program such as those developed in the technically advanced countries should be developed to exactly assess the doses administered to patients with the radiotherapy practices and develop the necessary procedures to maintain the continuing performance of the machine or equipment for the radiotherapy. The QA program and procedures should induce the fluent calibration of the machine or equipment with quality, and definitely establish the safety of patients in the radiotherapy practices. In this study, a methodology for the verification and evaluation of the radiotherapy doses is developed, and several accurate measurements, evaluations of the doses delivered to patients and verification of the performance of the therapy machine and equipment are

  8. Comparative economic evaluation of environmental impact of different cogeneration technologies

    International Nuclear Information System (INIS)

    Patrascu, Roxana; Athanasovici, Victor; Raducanu, Cristian; Minciuc, Eduard; Bitir-Istrate, Ioan

    2004-01-01

    Cogeneration is one of the most powerful technologies for reduction of environmental pollution along with renewable energies. At the Kyoto Conference cogeneration has been identified as being the most important measure for reducing emissions of greenhouse effect gases. It has also been mentioned that cogeneration has a potential of reducing pollution with about 180 million tones per year. In order to promote new cogeneration technologies and evaluate the existing ones it is necessary to know and to be able to quantify in economical terms the environmental issues. When comparing different cogeneration technologies: steam turbine (TA), gas turbine (TG), internal combustion engine (MT), in order to choose the best one, the final decision implies an economic factor, which is even more important if it includes the environmental issues. The environmental impact of different cogeneration technologies is quantified using different criteria: depletion of non-renewable natural resources, eutrofisation, greenhouse effect, acidification etc. Environmental analysis using these criteria can be made using the 'impact with impact' methodology or the global one. The results of such an analysis cannot be quantified economically directly. Therefore there is a need of internalisation of ecological effects within the costs of produced energy: electricity and heat. In the energy production sector the externalizations represent the indirect effects on the environment. They can be materialised within different types of environmental impact: - Different buildings of mines, power plants etc; - Fuel losses during transportation and processing; - Effect of emissions in the air, water and soil. Introduction of the environmental impact costs in the energy price is called internalisation and it can be made using the direct and indirect methods. The paper discusses aspects regarding the emissions of cogeneration systems, the eco-taxes - method of 'internalisation' of environmental

  9. Stereotactic Radiation Therapy for Liver Tumours. Technological evaluation report

    International Nuclear Information System (INIS)

    Zeghari-Squalli, Nadia

    2016-09-01

    The purpose of this report was to analyse the efficacy and safety data of Stereotactic Body Radiation Therapy (SBRT) in patients with inoperable primary (hepatocellular carcinoma (HCC) and metastatic liver tumors (LM), to define the indications and the place of SBRT in the therapeutic strategy with the aim of its inclusion in the CCAM (French National list of reimbursement). The key points that arose from this assessment are the following: - The results are preliminary and the literature is inconclusive about safety and efficacy; - There are no standardised guidelines for: the indications, the eligibility criteria, the treatment protocols or the place of SBRT in the therapeutic strategy; - SBRT is a technique that requires great rigorous radioprotection and quality assurance procedures; the professionals and National institutions concerned recommend that SBRT only be performed in centres with sufficient resources, specific expertise and an organisation which guarantees that the quality assurance procedures will be respected. Recommendations HAS believes it is premature to recommend SBRT for the routine treatment of liver tumors and its reimbursement by the National Health Insurance (Assurance Maladie). HAS recommends its use in the strict context of clinical research by centres with sufficient resources, specific expertise and an organisation which guarantees that the quality assurance procedures will be respected. The literature search strategy prioritized randomised comparative studies and systematic reviews; If these were not available then non-randomised controlled trials, prospective studies were to be used and finally retrospective studies and case series were to be used. The assessment of SRBT for liver tumors was based on the critical analysis of clinical data from: - Three prospective case series, five retrospective case series, four health technology evaluation reports and 11 good practice recommendations, for primary liver tumors (HCC) - One prospective

  10. Evaluation of a permeable reactive barrier technology for use at Rocky Flats Environmental Technology Site (RFETS)

    International Nuclear Information System (INIS)

    Dwyer, Brian P.

    2000-01-01

    Three reactive materials were evaluated at laboratory scale to identify the optimum treatment reagent for use in a Permeable Reactive Barrier Treatment System at Rocky Flats Environmental Technology Site (RFETS). The contaminants of concern (COCS) are uranium, TCE, PCE, carbon tetrachloride, americium, and vinyl chloride. The three reactive media evaluated included high carbon steel iron filings, an iron-silica alloy in the form of a foam aggregate, and a peculiar humic acid based sorbent (Humasorb from Arctech) mixed with sand. Each material was tested in the laboratory at column scale using simulated site water. All three materials showed promise for the 903 Mound Site however, the iron filings were determined to be the least expensive media. In order to validate the laboratory results, the iron filings were further tested at a pilot scale (field columns) using actual site water. Pilot test results were similar to laboratory results; consequently, the iron filings were chosen for the fill-scale demonstration of the reactive barrier technology. Additional design parameters including saturated hydraulic conductivity, treatment residence time, and head loss across the media were also determined and provided to the design team in support of the final design. The final design was completed by the Corps of Engineers in 1997 and the system was constructed in the summer of 1998. The treatment system began fill operation in December, 1998 and despite a few problems has been operational since. Results to date are consistent with the lab and pilot scale findings, i.e., complete removal of the contaminants of concern (COCs) prior to discharge to meet RFETS cleanup requirements. Furthermore, it is fair to say at this point in time that laboratory developed design parameters for the reactive barrier technology are sufficient for fuel scale design; however,the treatment system longevity and the long-term fate of the contaminants are questions that remain unanswered. This

  11. What you think about the Bulletin

    CERN Multimedia

    Alizée Dauvergne

    2010-01-01

    The internal communication service has carried out a survey regarding the quality of the Bulletin. Between the middle of May and the middle of June, 35 members of the CERN personnel were consulted individually about what they liked and disliked about the Bulletin and any changes they wanted to see.   A wide readership The first point to emerge from the survey is that the Bulletin is read by a large proportion of the CERN population, even if opinions on its form and contents vary: 33 of the 35 people questioned said that they read it, representing 94.3%. Some even consider it as a point of reference: "If a subject isn’t featured in the Bulletin, I don't even know it exists!", said one young woman. Different reading habits Of course, almost all the people questioned don't read the Bulletin from cover to cover but select the information which concerns them personally or is on a subject of interest to them. The choice of articles read varies according to profession, job a...

  12. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sung Jin; Kim, Young Hwan; Shin, Hyun Jae [Sungkwunkwan Univ., Seoul (Korea, Republic of); Lee, Hyang Beom [Soongsil Univ., Seoul (Korea, Republic of); Shin, Young Kil [Kunsan National Univ., Gunsan (Korea, Republic of); Chung, Hyun Jo [Wonkwang Univ., Iksan (Korea, Republic of); Park, Ik Keun; Park, Eun Soo [Seoul National University of Technology, Seoul (Korea, Republic of)

    2001-03-15

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of nuclear power plant. In order to Improve reliabilities of ultrasonic testing and eddy current testing, the following five subjects were carried out in this study: development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field and evaluation of statistical reliability of PD-RR test of ultrasonic testing. As results, BEM analysis of eddy current signal, intelligent analysis of eddy current signal using neural network, and FEM analysis of remote field eddy current testing have been developed for the inspection of SG tubes. FEM analysis of ultrasonic waves in 2-dimensional media and evaluation of statistical reliability of ultrasonic testing with PD-RR test also have been carried out for the inspection of weldments. Those results can be used to Improve reliability of nondestructive testing.

  13. Using Voice Boards: pedagogical design, technological implementation, evaluation and reflections

    Directory of Open Access Journals (Sweden)

    Elisabeth Yaneske

    2010-12-01

    Full Text Available We present a case study to evaluate the use of a Wimba Voice Board to support asynchronous audio discussion. We discuss the learning strategy and pedagogic rationale when a Voice Board was implemented within an MA module for language learners, enabling students to create learning objects and facilitating peer-to-peer learning. Previously students studying the module had communicated using text-based synchronous and asynchronous discussion only. A common criticism of text-based media is the lack of non-verbal communication. Audio communication is a richer medium where use of pitch, tone, emphasis and inflection can increase personalisation and prevent misinterpretation. Feedback from staff and students on the affordances and constraints of voice communication are presented. Evaluations show that while there were several issues with the usability of the Wimba Voice Board, both staff and students felt the use of voice communication in an online environment had many advantages, including increased personalisation, motivation, and the opportunity to practice speaking and listening skills. However, some students were inhibited by feelings of embarrassment. The case study provides an in-depth study of Voice Boards, which makes an important contribution to the learning technology literature.

  14. Development of life evaluation technology for nuclear power plant components

    International Nuclear Information System (INIS)

    Song, Sung Jin; Kim, Young Hwan; Shin, Hyun Jae; Lee, Hyang Beom; Shin, Young Kil; Chung, Hyun Jo; Park, Ik Keun; Park, Eun Soo

    2001-03-01

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of nuclear power plant. In order to Improve reliabilities of ultrasonic testing and eddy current testing, the following five subjects were carried out in this study: development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field and evaluation of statistical reliability of PD-RR test of ultrasonic testing. As results, BEM analysis of eddy current signal, intelligent analysis of eddy current signal using neural network, and FEM analysis of remote field eddy current testing have been developed for the inspection of SG tubes. FEM analysis of ultrasonic waves in 2-dimensional media and evaluation of statistical reliability of ultrasonic testing with PD-RR test also have been carried out for the inspection of weldments. Those results can be used to Improve reliability of nondestructive testing

  15. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part A, Characterization, Decontamination

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram; and Vol. 3, Technology Evaluation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B,and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA, and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2. The data sheets are arranged alphanumerically by the TEDS code number in the upper right comer of each sheet.

  16. Technology development for evaluation of operational quantities in radiation protection

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jang Lyul; Chang, S. Y.; Lee, L. T.; Kim, B. H.; Chung, K. K.; Lee, J. I.; Lim, G. S.; Kim, J. S.; Nam, Y. M.; Chang, J. K.; Kim, D. Y.; Yang, J. S

    2000-03-01

    A study on the fabrication of a new personal thermo-luminescence dosimeter, which can evaluate the personal dose equivalent H{sub p}(d), has been performed. Optimum conditions for fabrication of a LiF:Mg,Cu,Na,Si TL phosphor powder has been determined and a disc type TL pellet has been fabricated from this TL powder. Another type of CaSO{sub 4}:Dy,Mo TL material has been also fabricated. These two TL materials have shown greater TL sensitivity than the foreign-made commercial TL materials. Mono-energetic fluorescence X-ray from 8.6 keV to 75 keV for use in performance testing of the developed TLDs energy response have been constructed and evaluated for the performance of the purity, air kerma, beam uniformity and distribution, and scattered fraction of X-rays. Reference neutron field of a D{sub 2}O moderated {sup 252}Cf source was characterized and the irradiation system using {sup 226}Ra and {sup 137}Cs sources was installed to construct the environmental gamma reference radiation and the low-level gamma radiation. A capability of calibration and measurement of KAERI In Vivo counting system for transuranic elements in the lung has been evaluated through the participation in the overseas intercomparison study on the In Vivo radioactivity measurement. An improvement and advancement of KAERI lung counting technology have been made by the analysis off uncertainties from the assumption of uniform radioactivity distribution in the lung, experimental determination and comparing of detection efficiency with different lung sets, and mathematical efficiency calibration of In Vivo counting system. (author)

  17. A Re-Evaluation of Mobile Communication Technology: A Theoretical Approach for Technology Evaluation in Contemporary Digital Learning

    Science.gov (United States)

    Yumurtaci, Onur

    2017-01-01

    We live in an age of continual technological development. Rapidly developing technologies have found use in nearly all aspects of life. As such, it is understandable that technology has also infiltrated the field of education. Information and Communication Technology (ICT) has provided us with the technical underpinnings for distance and lifelong…

  18. ECONOMIC EVALUATION OF CO2 SEQUESTRATION TECHNOLOGIES; SEMIANNUAL

    International Nuclear Information System (INIS)

    Bert R. Bock; Richard G. Rhudy; David E. Nichols

    2001-01-01

    In order to plan for potential CO(sub 2) mitigation mandates, utilities need better information on CO(sub 2) mitigation options, especially carbon sequestration options that involve non-utility operations. One of the major difficulties in evaluating CO(sub 2) sequestration technologies and practices, both geologic storage of captured CO(sub 2) and storage in biological sinks, is obtaining consistent, transparent, accurate, and comparable economics. This project is comparing the economics of major technologies and practices under development for CO(sub 2) sequestration, including captured CO(sub 2) storage options such as active oil reservoirs, depleted oil and gas reservoirs, deep aquifers, coal beds, and oceans, as well as the enhancement of biological sinks such as forests and croplands. An international group of experts has been assembled to compare on a consistent basis the economics of this diverse array of CO(sub 2) sequestration options. Designs and data collection are nearly complete for each of the CO(sub 2) sequestration options being compared. Initial spreadsheet development has begun on concepts involving storage of captured CO(sub 2). No significant problems have been encountered, but some additional outside expertise will be accessed to supplement the team's expertise in the areas of life cycle analysis, oil and gas exploration and production, and comparing CO(sub 2) sequestration options that differ in timing and permanence of CO(sub 2) sequestration. Plans for the next reporting period are to complete data collection and a first approximation of the spreadsheet. We expect to complete this project on time and on budget

  19. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  20. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  1. Review and evaluation of alternative chemical disposal technologies

    National Research Council Canada - National Science Library

    National Research Council Staff; Commission on Engineering and Technical Systems; Division on Engineering and Physical Sciences; National Research Council; National Academy of Sciences

    ... in comparison to the Army's baseline incineration system. The volume's main finding was that no alternative technology was preferable to incineration but that work should continue on the neutralization technologies under Army consideration...

  2. Evaluating Satellite and Supercomputing Technologies for Improved Coastal Ecosystem Assessments

    Science.gov (United States)

    McCarthy, Matthew James

    Water quality and wetlands represent two vital elements of a healthy coastal ecosystem. Both experienced substantial declines in the U.S. during the 20th century. Overall coastal wetland cover decreased over 50% in the 20th century due to coastal development and water pollution. Management and legislative efforts have successfully addressed some of the problems and threats, but recent research indicates that the diffuse impacts of climate change and non-point source pollution may be the primary drivers of current and future water-quality and wetland stress. In order to respond to these pervasive threats, traditional management approaches need to adopt modern technological tools for more synoptic, frequent and fine-scale monitoring and assessment. In this dissertation, I explored some of the applications possible with new, commercial satellite imagery to better assess the status of coastal ecosystems. Large-scale land-cover change influences the quality of adjacent coastal water. Satellite imagery has been used to derive land-cover maps since the 1960's. It provides multiple data points with which to evaluate the effects of land-cover change on water quality. The objective of the first chapter of this research was to determine how 40 years of land-cover change in the Tampa Bay watershed (6,500 km2) may have affected turbidity and chlorophyll concentration - two proxies for coastal water quality. Land cover classes were evaluated along with precipitation and wind stress as explanatory variables. Results varied between analyses for the entire estuary and those of segments within the bay. Changes in developed land percent cover best explained the turbidity and chlorophyll-concentration time series for the entire bay (R2 > 0.75, p metrics were evaluated against atmospheric, meteorological, and oceanographic variables including precipitation, wind speed, U and V wind vectors, river discharge, and water level over weekly, monthly, seasonal and annual time steps. Climate

  3. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections.

  4. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections

  5. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section

  6. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section.

  7. Enhanced Geothermal Systems (EGS) Well Construction Technology Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Polsky, Yarom [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Capuano, Louis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Finger, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Huh, Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Knudsen, Steve [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chip, A.J. Mansure [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Raymond, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Swanson, Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2008-12-01

    This report provides an assessment of well construction technology for EGS with two primary objectives: 1. Determining the ability of existing technologies to develop EGS wells. 2. Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics.

  8. Science You Can Use Bulletin: Burgeoning biomass: Creating efficient and sustainable forest biomass supply chains in the Rockies

    Science.gov (United States)

    Sue Miller; Maureen Essen; Nate Anderson; Woody Chung; Bill Elliot; Deb Page-Dumroese; Han-Sup Han; John Hogland; Christopher R. Keyes

    2014-01-01

    Woody biomass could be used to generate energy in the western US if the utilization process is both economically feasible and ecologically sustainable. The purpose of the RMRS-led Biomass Research and Development Initiative (BRDI) is to develop technologies, approaches, and new science that will help to make this possible. This issue of the Bulletin is focused on...

  9. The new Bulletin has arrived!

    CERN Multimedia

    2006-01-01

    This edition of the CERN Bulletin is the first with a new layout for the paper version. Its innovations include a more attractive format, as well as the printing of the English and French texts on inverted pages, the two distinguishable by the colour of the header on the first page (green for the English and blue for the French). This and the use of pictograms to identify the various sections make the whole thing easier to read. The introduction of this new formula coincides with the addition of a new section, a monthly column called 'A Word from the DG,' in which the Director-General will give an update on the main issues facing CERN and particle physics. The coming months will see the introduction of other new sections. Last but not least, the weekly timetable of seminars, showing the title, date and speaker, now appears in the middle of the paper version rather than at the end. Summaries are published only on the Web. All these changes are accompanied by new distribution arrangements. You will find pap...

  10. Initial ACTR retrieval technology evaluation test material recommendations

    International Nuclear Information System (INIS)

    Powell, M.R.

    1996-04-01

    Millions of gallons of radiaoctive waste are contained in underground storage tanks at Hanford (SE Washington). Techniques for retrieving much of this waste from the storage tanks have been developed. Current baseline approach is to use sluice jets for single-shell tanks and mixer pumps for double-shell tanks. The Acquire Commercial Technology for Retrieval (ACTR) effort was initiated to identify potential improvements in or alternatives to the baseline waste retrieval methods. Communications with a variety of vendors are underway to identify improved methods that can be implemented at Hanford with little or no additional development. Commercially available retrieval methods will be evaluated by a combination of testing and system-level cost estimation. Current progress toward developing waste simulants for testing ACTR candidate methods is reported; the simulants are designed to model 4 different types of tank waste. Simulant recipes are given for wet sludge, hardpan/dried sludge,hard saltcake, and soft saltcake. Comparisons of the waste and simulant properties are documented in this report

  11. EVALUATION OF SUPERCRITICAL CARBON DIOXIDE TECHNOLOGY TO REDUCE SOLVENT IN SPRAY COATING APPLICATIONS

    Science.gov (United States)

    This evaluation, part of the Pollution Prevention Clean Technology Demonstration (CTD) Program, addresses the product quality, waste reduction, and economic issues of spray paint application using supercritical carbon dioxide (CO2). Anion Carbide has developed this technology and...

  12. Space Qualified Non-Destructive Evaluation and Structural Health Monitoring Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NextGen Aeronautics is proposing an innovative space qualified non-destructive evaluation and health monitoring technology. The technology is built on concepts...

  13. Space Qualified Non-Destructive Evaluation and Structural Health Monitoring Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NextGen Aeronautics is proposing an innovative space qualified non-destructive evaluation and health monitoring technology. The technology is built on concepts...

  14. International bulletin on atomic and molecular data for fusion. No. 61

    International Nuclear Information System (INIS)

    Stephens, J.A.; Bannister, M.E.; Delcroix, J.L.; Fuhr, J.

    2002-01-01

    This bulletin is prepared by the IAEA to assist in the development of fusion research and technology. In part 1 the Atomic and Molecular Data Information System (AMDIS) of the IAEA is presented. In part 2, the indexed papers are listed separately for structure and spectra, atomic and molecular collisions and surface interactions. Part 3 contains all the bibliographic data for both indexed and non-indexed references

  15. Integrating Human Factors Engineering and Information Processing Approaches to Facilitate Evaluations in Criminal Justice Technology Research.

    Science.gov (United States)

    Salvemini, Anthony V; Piza, Eric L; Carter, Jeremy G; Grommon, Eric L; Merritt, Nancy

    2015-06-01

    Evaluations are routinely conducted by government agencies and research organizations to assess the effectiveness of technology in criminal justice. Interdisciplinary research methods are salient to this effort. Technology evaluations are faced with a number of challenges including (1) the need to facilitate effective communication between social science researchers, technology specialists, and practitioners, (2) the need to better understand procedural and contextual aspects of a given technology, and (3) the need to generate findings that can be readily used for decision making and policy recommendations. Process and outcome evaluations of technology can be enhanced by integrating concepts from human factors engineering and information processing. This systemic approach, which focuses on the interaction between humans, technology, and information, enables researchers to better assess how a given technology is used in practice. Examples are drawn from complex technologies currently deployed within the criminal justice system where traditional evaluations have primarily focused on outcome metrics. Although this evidence-based approach has significant value, it is vulnerable to fully account for human and structural complexities that compose technology operations. Guiding principles for technology evaluations are described for identifying and defining key study metrics, facilitating communication within an interdisciplinary research team, and for understanding the interaction between users, technology, and information. The approach posited here can also enable researchers to better assess factors that may facilitate or degrade the operational impact of the technology and answer fundamental questions concerning whether the technology works as intended, at what level, and cost. © The Author(s) 2015.

  16. Coal gasification systems engineering and analysis. Appendix G: Commercial design and technology evaluation

    Science.gov (United States)

    1980-01-01

    A technology evaluation of five coal gasifier systems (Koppers-Totzek, Texaco, Babcock and Wilcox, Lurgi and BGC/Lurgi) and procedures and criteria for evaluating competitive commercial coal gasification designs is presented. The technology evaluation is based upon the plant designs and cost estimates developed by the BDM-Mittelhauser team.

  17. TERRA-KLEEN RESPONSE GROUP, INC. SOLVENT EXTRACTION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the results of a field demonstration conducted under the SITE program. The technology which was demonstrated was a solvent extraction technology developed by Terra-Kleen Response Group. Inc. to remove organic contaminants from soil. The technology employs...

  18. Evaluating Colombian SMEs’ technological innovation: Part 1: conceptual basis, evaluation methodology and characterisation of innovative companies

    Directory of Open Access Journals (Sweden)

    Óscar Fernando Castellanos Domínguez

    2007-01-01

    Full Text Available Innovative processes currently constitute one of the most important alternatives for increasing organisations’ levels of competitiveness and productivity. The Colombian state (being conscious of this has generated mechanisms aimed at encouraging technological and innovative development activities in SMEs, as was the case with the Colombian Prize for Entrepreneurial Technological Innovation for SME (Innova 2006. The experience acquired through the technical evaluation of such prize was a valuable element for identifying Colombian MSMSC innovative characteristics and trends. The present article seeks to establish the current state of innovation in SMEs from expe- rience gained when evaluating and awarding the Innova prize; a frame of reference concerning innovation and design, the methodology used for evaluating the prize and some general statistics regarding the results obtained in 2006 are thus presented. A future publication will give the factors influencing innovation taking geographical regions, sectors and impact as reference. Such results revealed innovative initiatives in strategic sectors such as computer science and services, the leadership of cities such as Bogota and MedellIn and the need for producing clear guidelines for incorporating process and product design into being part of the innovative process.

  19. Evaluation of Representative Smart Grid Investment Project Technologies: Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Prakash Kumar, Nirupama; Bonebrake, Christopher A.

    2012-02-14

    This document is one of a series of reports estimating the benefits of deploying technologies similar to those implemented on the Smart Grid Investment Grant (SGIG) projects. Four technical reports cover the various types of technologies deployed in the SGIG projects, distribution automation, demand response, energy storage, and renewables integration. A fifth report in the series examines the benefits of deploying these technologies on a national level. This technical report examines the impacts of a limited number of demand response technologies and implementations deployed in the SGIG projects.

  20. Evaluation of TOGAF as a Management of Technology Framework

    DEFF Research Database (Denmark)

    Tambo, Torben; Bargholz, Jonas Magleby; Yde, Lars

    2016-01-01

    The purpose of this paper is to review the management of technology (MOT) discipline in an industrial context, where the framework of TOGAF (The Open Group Architecture Framework) is selected to guide technological change, strategic orientation and technology portfolio realignment after a merger...... of TOGAF. The study indicate TOGAF is a viable framework for MOT although with shortcomings related to organizational and human aspects on the one side, and core technologies in form of data, systems and networks, on the other side. To the major findings of this paper are issues of potentials for adding...

  1. Construction and Research of Evaluation Indicator System for Technological Innovation Performance

    OpenAIRE

    Li, Xiaolang; Liang, Ying; Lu, Boli

    2013-01-01

    In view of sci-tech innovation and innovation-driving requirements of Chinese President Xi Jinping, it is necessary to establish a complete evaluation indicator system for technological innovation performance in Guizhou Province, to accurately evaluate development situation of technological innovation in Guizhou Province, promote close connection of science and technology with economy, and boost rapid development of national economy. In Guizhou Province, there is still no complete evaluation ...

  2. NHTSA's Office of Defects Investigation (ODI) - Technical Service Bulletins System (TSBS) - Downloadable file

    Data.gov (United States)

    Department of Transportation — The Technical Service Bulletins data contains summaries of the Manufacturers' Technical Service Bulletins by single year, make and model. An optional item of Vehicle...

  3. A Survey on Evaluation Factors for Business Process Management Technology

    NARCIS (Netherlands)

    Mutschler, B.B.; Reichert, M.U.

    2006-01-01

    Estimating the value of business process management (BPM) technology is a difficult task to accomplish. Computerized business processes have a strong impact on an organization, and BPM projects have a long-term cost amortization. To systematically analyze BPM technology from an economic-driven

  4. Evaluating the Effect of Information Technology in Small Businesses

    Science.gov (United States)

    Newman, Peter

    2010-01-01

    Information technology (IT) has become a strategic vehicle for small businesses to achieve and sustain their competitive advantage. Prior research has suggested that information technology plays an important role in the decision-making process. The purpose of this study is to examine the relationship between organizational IT performance and…

  5. Technological Innovations and Banking in Ghana: An Evaluation of ...

    African Journals Online (AJOL)

    In Sub-Saharan Africa, developments in information and communication technology are radically changing the way business is done. These developments in technology have resulted in new delivery channels for banking products and services such as Automated Teller Machines (ATMs), Telephone Banking, PC-Banking, ...

  6. Economic evaluation of three on-station fish farming technologies ...

    African Journals Online (AJOL)

    While the technolo-gies were considered to be socially desirable that could ensure efficiency in use of resources, screening on-station was germane in technology transfer. Undiscounted profit, rate of return, return on annual operation cost, benefit-cost ratio, return to management, and land were adopted as indicators for ...

  7. Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 2

    Science.gov (United States)

    Greenburg, J. S.; Kaplan, M.; Fishman, J.; Hopkins, C.

    1985-01-01

    The computational procedures used in the evaluation of spacecraft technology programs that impact upon commercial communication satellite operations are discussed. Computer programs and data bases are described.

  8. Electronic bulletin board. OCRWM INFOLINK. Revision

    International Nuclear Information System (INIS)

    1986-04-01

    This user's manual provides instructions for access to OCRWM INFOLINK (an electronic bulletin board). INFOLINK provides current program information and access to texts of: press releases; fact sheets/backgrounders; comgressional questions and answers; congressional testimony; speeches; schedules (milestones, meetings, and activities); and miscellaneous announcements

  9. Monthly Bulletin of Statistics. December 2009

    International Nuclear Information System (INIS)

    2009-01-01

    The Monthly Bulletin of Statistics presents statistics for more than 200 countries and territories of the world. It contains monthly and/or annual and quarterly data on a variety of subjects, including population, prices, employment and earnings, energy, manufacturing, transport, construction, international merchandise trade and finance

  10. Market bulletin and own load - June 1992

    International Nuclear Information System (INIS)

    1992-01-01

    This bulletin deals with the brazilian electric power consumption in June 1992, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C.)

  11. Market bulletin and own load - October 1992

    International Nuclear Information System (INIS)

    1992-01-01

    This bulletin deals with the brazilian electric power consumption in October 1992, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C.)

  12. Market bulletin and own load - May 1991

    International Nuclear Information System (INIS)

    1991-01-01

    This bulletin deals with the brazilian electric power consumption in May 1991, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C.)

  13. Market and own load bulletin - May 1993

    International Nuclear Information System (INIS)

    1993-01-01

    This bulletin shows the Brazilian electric power consumption in May 1993, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each Brazilian region. The economic indexes of industrial production, the market, the prices of electric power and petroleum products are also presented. (M.V.M.)

  14. Market bulletin and own load - October 1991

    International Nuclear Information System (INIS)

    1991-01-01

    This bulletin deals with the brazilian electric power consumption in October 1991, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C.)

  15. Market bulletin and own load - May 1992

    International Nuclear Information System (INIS)

    1992-01-01

    This bulletin deals with the brazilian electric power consumption in May 1992, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C.)

  16. Market and own load bulletin - February 1993

    International Nuclear Information System (INIS)

    1993-01-01

    This bulletin shows the Brazilian electric power consumption in February 1993, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each Brazilian region. The economic indexes of industrial production, the market, the prices of electric power and petroleum products are also presented. (M.V.M.)

  17. Market bulletin and own load - April 1992

    International Nuclear Information System (INIS)

    1992-01-01

    This bulletin deals with the brazilian electric power consumption in April 1992, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each brazilian region. The economic indexes of industrial production, the market and the prices of electric power and petroleum products are also presented. (C.G.C.)

  18. Market and own load bulletin - November 1992

    International Nuclear Information System (INIS)

    1992-01-01

    This bulletin shows the Brazilian electric power consumption in November 1993, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each Brazilian region. The economic indexes of industrial production, the market, the prices of electric power and petroleum products are also presented. (M.V.M.)

  19. Market and own load bulletin - January 1993

    International Nuclear Information System (INIS)

    1993-01-01

    This bulletin shows the Brazilian electric power consumption in January 1993, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each Brazilian region. The economic indexes of industrial production, the market, the prices of electric power and petroleum products are also presented. (M.V.M.)

  20. Market and own load bulletin - March 1993

    International Nuclear Information System (INIS)

    1993-01-01

    This bulletin shows the Brazilian electric power consumption in March 1993, containing data about the total consumption, the growth rates, the special tariffs and monthly evolution in each Brazilian region. The economic indexes of industrial production, the market, the prices of electric power and petroleum products are also presented. (M.V.M.)

  1. Family Violence & Sexual Assault Bulletin, 1996.

    Science.gov (United States)

    Geffner, Robert, Ed.

    These two Bulletins contain selected articles that highlight research and treatment issues in child abuse and child sexual abuse. The first issue includes the following featured articles: (1) "The Relationships between Animal Abuse and Other Forms of Family Violence" (Phil Arkow), which addresses animal cruelty as a harbinger of…

  2. College Readiness Indicators. Bulletin. Issue 25

    Science.gov (United States)

    Cromwell, Ashley M.; McClarty, Katie Larsen; Larson, Sarah J.

    2013-01-01

    This paper outlines current student-level indicators at the high school and middle school levels that predict college success. In this bulletin, indicators are divided into three categories: assessment scores (e.g., SAT® exam scores), transcript attributes (e.g., course rigor), and additional indicators (e.g., attendance) that impact achievement.

  3. Predictors of Youth Violence. Juvenile Justice Bulletin.

    Science.gov (United States)

    Hawkins, J. David; Herrenkohl, Todd I.; Farrington, David P.; Brewer, Devon; Catalano, Richard F.; Harachi, Tracy W.; Cothern, Lynn

    This Bulletin describes the strength and duration of changeable risk and protective factors for youth violence at points in youth development when they appear most salient. These predictors are potential targets for prevention and intervention. The quantitative results of a large number of studies were synthesized using meta-analysis procedures.…

  4. CERN Bulletin publication schedule for 2014

    CERN Multimedia

    DG Unit

    2013-01-01

    The table below lists the 2014 publication dates for the CERN Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 noon on Tuesdays at the latest.   Bulletin No. (corresponding to the week number) Submission of announcements (before 12.00 midday) Bulletin Web version Bulletin Printed version 4-5   Tuesday 14 January Friday 17 January Wednesday 22 January 6-7   Tuesday 28 January Friday 31 January Wednesday 5 February 8-9 Tuesday 11 February Friday 14 February Wednesday 19 February 10-11 Tuesday 25 February Friday 28 February Wednesday 5 March 12-13 Tuesday 11 March Friday 14 March Wednesday 19 March 14-15 Tuesday 25 March Friday 28 March Wednesday 2 April 16-17 Tuesday 8 April Friday 11 April Wednesday 16 April 18-19 Tuesday 22 April Friday 25 April Thursday 30 April 20-21 Tuesday 6 May Friday 9 May Wednesday 14 May 22-23 Tuesday ...

  5. Juvenile Arrests, 2000. Juvenile Justice Bulletin.

    Science.gov (United States)

    Snyder, Howard N.

    This bulletin examines the national and state juvenile arrest rate in 2000 using data reported annually by local law enforcement agencies nationwide to the FBI's Uniform Crime Reporting program. Results indicate that the murder rate in 2000 was the lowest since 1965; juvenile arrests for violence in 2000 were the lowest since 1988; few juveniles…

  6. OCRWM INFOLINK: an electronic bulletin board

    International Nuclear Information System (INIS)

    1985-12-01

    This Users' Manual provides instructions for access to OCRWM INFOLINK (an electronic bulletin board). Ready access is provided to texts of: press releases; fact sheets/backgrounders; congressional questions and answers; congressional testimony; speeches; schedules (milestones, meetings, and activities); and miscellaneous announcements

  7. The CODESRIA Bulletin: A Content Analysis

    African Journals Online (AJOL)

    Prof

    DISCIPLINARY JOURNAL,. ETHIOPIA. AFRREV VOL. 11 (1), SERIAL NO. 45, JANUARY, 2017:1-10. ISSN 1994-9057 (Print). ISSN 2070-0083 (Online). DOI : http://dx.doi.org/10.4314/afrrev.v11i1.1. The CODESRIA Bulletin: A Content Analysis.

  8. Fighting Juvenile Gun Violence. Juvenile Justice Bulletin.

    Science.gov (United States)

    Sheppard, David; Grant, Heath; Rowe, Wendy; Jacobs, Nancy

    This bulletin describes the Office of Juvenile Justice and Delinquency Prevention's efforts to fight juvenile gun violence. The Office awarded four community demonstration grants to implement "Partnerships To Reduce Juvenile Gun Violence." Partnership goals include increasing the effectiveness of existing strategies by enhancing and…

  9. METHODS FOR EVALUATION OF COMPANIES’ INFORMATION SYSTEMS AND TECHNOLOGIES EFFICIENCY AND CONTROL IN TEACHING COURSE "INFORMATION TECHNOLOGY GOVERNANCE"

    Directory of Open Access Journals (Sweden)

    Samchynska Yaroslava

    2014-10-01

    Full Text Available The use of the information systems and technologies in economic activity is called to represent companies’ corporate principles, aims, traditions, to help in realization of the planned strategies, thanks to that the management efficiency and the cost of enterprise increases. Teaching for educational discipline «IT Governance» is directed on a study and research of these intercommunications by students of the 5th course on specialties «Computer Science», «Software Engineering» for educational level Specialist (Past Bachelor Degree, Master degree. The auditing services belong to the actual methods for evaluation of the information systems and technologies efficiency and control, which are studied according to the course «IT Governance». The article deals with the methodological basis of providing auditing services for evaluation of efficiency and control of information systems (technologies for the purpose of satisfaction of growing informational needs of companies and functional activation in their information resources. The main task of auditing services for control of information systems (information communication technologies efficiency is to evaluate independently and objectively if the information technologies provide the necessary services. The basic criteria, data ware, subject and object of audit necessary for drawing up an audit report and assurance declaring are established. The program and a detailed list of auditing procedures for evaluation of efficiency of information systems and technologies have been presented

  10. A New Framework for Evaluating the Functional Capabilities of Intra-Enterprise Application Integration Technologies

    Directory of Open Access Journals (Sweden)

    Hossein Moradi

    2010-10-01

    Full Text Available Enterprise Application Integration (EAI technologies facilitate the sharing of information and business processes of interrelated information systems in order to achieve the target integrated systems. Different EAI solutions and technologies provide various capabilities which lead to the complexity of their evaluation process. To reduce this complexity, appropriate tools for evaluating the functional capabilities of EAI technologies are required. This paper proposes a new framework for evaluating the functional capabilities of EAI technologies, which simplify the process of evaluating the functional capabilities of intra-enterprise integration technologies and solutions.The proposed framework for evaluating the EAI technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various EAI technologies are categorized in different classes and are evaluated based on their supporting level for functional integration capabilities’ criteria.The new framework offers two lists containing integration technologies and their associated classifications, and functional capabilities of integration technologies. The proposed framework is a novel one which can be used by information system experts for evaluation and comparison purposes of various integration technologies.

  11. EVALUATION OF TECHNOLOGICAL INTENSITY OF EXPORTS IN THE FORESTRY SECTOR

    Directory of Open Access Journals (Sweden)

    Orlando Monteiro da Silva

    2016-04-01

    Full Text Available ABSTRACT One of the fastest growing sectors in the domestic industry is the forestry, which has contributed significantly to economic development, job creation, income taxes, putting Brazil in a prominent position in the world market. This paper analyzes the evolution of the technological intensity of 12 main products exported by the sector, from 2000 to 2011. For that, utilizes an indicator called PRODY, which allows classifying different products according to their technological intensity or income content and considers the GDP per capita of exporting countries of each product, weighted by its revealed comparative advantage. It can be seen by the results, a continuous growth in all products' technology indicators and their decomposition into income effects, comparative advantage and joint effects, allowed to verify the main causes of this growth. Products with lower PRODY values are those that presented a higher evolution during the period studied. Products of higher processing, and those from pulp and paper industry, had greater technological advances, thanks to a joint effect, while the ones of lower processing, had a technological improvement due to the increase in GDP per capita in exporting countries. Sawn wood was the standout product, being the only one who proved to be dependent of comparative advantage effect, confirming that this industry has been reinventing itself and incorporating, in fact, more technology. This study revealed the importance of technological intensification to generate comparative advantage and be able to stand against international competition.

  12. Evaluating learning and teaching technologies in further education

    Directory of Open Access Journals (Sweden)

    Ann Jones

    2000-12-01

    Full Text Available There is currently an unprecedented interest in the use of technologies for supporting teaching and learning. In post-compulsory education, the current Government's commitment to increasing access to Lifelong Learning is expressed through a number of initiatives that also affect the further education (FE sector. For example, in The Learning Age: A Renaissance for a New Britain (Stationery Office, 1998 the government outlines its proposal to expand the scale, scope and nature of both further and higher education. The Learning Age follows a number of such government papers that emphasize the importance of Information and Communication Technologies (ICTs or Information and Learning Technologies (ILTs in FE and HE.

  13. Mars In-Situ Resource Utilization Technology Evaluation

    Science.gov (United States)

    Santiago-Maldonado, Edgardo; Muscatello, Anthony

    2011-01-01

    We have examined the technologies required to enable Mars Tn-Situ Resource Utilization (ISRU) because our understanding of Mars resources has changed significantly in the last five years as a result of recent robotic missions to the red planet [1-4]. Two major developments, (1) confirmation of the presence of near-surface water in the form of ice in very large amounts at high latitudes by the Phoenix Lander and (2) the likely existence of water at lower latitudes in the form of hydrates or ice in the top one meter of the regolith, have the potential to change ISRU technology selection. A brief technology assessment was performed for the most promising Mars atmospheric gas processing techniques: Reverse Water Gas Shift (RWGS) and Methanation (aka Sabatier), as well as an overview of soil.processing technology to extract water from Martian soil.

  14. Lightweight Zerodur Mirror Technology Technical Report Analysis Condensation Evaluation (TRACE)

    National Research Council Canada - National Science Library

    Gardopee, George

    1982-01-01

    ...), greater homogeneity, and easier machinability and polishability. Zerodur has not been selected as a candidate mirror blank material because the technology for producing lightweight mirrors from Zerodur did not exist...

  15. Evaluation of automated vehicle technology for transit : [summary].

    Science.gov (United States)

    2014-01-01

    Automated transportation has been portrayed in : futuristic literature since the 19th century, but : making vehicles truly autonomous has only been : possible in recent decades with advanced control : and computer technologies. Automating cars is a :...

  16. Training Effectiveness Evaluation of the VESUB Technology Demonstration System

    National Research Council Canada - National Science Library

    Hays, Robert

    1998-01-01

    ...) technology demonstration system. A two-phase TEE was conducted at the Submarine Training Facility, Norfolk, VA and the Naval Submarine School, Groton, CT using Navy trainees ranging in experience from Junior Officers to qualified...

  17. Radiation Evaluation and Concept Development for Analog Probability Processing Technology

    Data.gov (United States)

    National Aeronautics and Space Administration — Analog probability processing technology has the ability to provide game-changing performance advances and power savings for on-board data processing applications....

  18. Energy technology programmes 1993-1998. Evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    1999-09-01

    In the late 1980s Finland`s Ministry of Trade and Industry (KTM) initiated a series of research and development (R and D) programmes in the field of energy technology. Subsequently, in 1993, it launched a further suite of eleven Energy Technology Programmes scheduled to run over the period 1993-1998. Aimed at the development of efficient and environmentally sound energy technologies intended to be competitive in the international marketplace, the programmes sought to involve the research, industrial and public sectors in some FIM 1.2 billion of research and development activity. The technology areas spanned: Combustion and gasification techniques Bioenergy, Advanced energy systems and technologies (e.g. wind, solar energy), Fusion, Energy and environmental technology, Energy and the environment in transportation, Energy use in buildings, Energy in steel and metal production, Energy in paper and board production, District heating, Electricity distribution automation. In early 1995, the Technology Development Centre of Finland (Tekes) assumed responsibility for the funding, management and administration of the programmes. As the final year of activities began, Tekes commissioned Technopolis to assemble a team to conduct a major review of all eleven programmes over the course of 1998. The broad aim of the exercise was to review the experience of the eleven technology R and D programmes and to make suggestions for the future. In particular, the intention was to cover a number of distinct levels. Most important were the Programme and Portfolio levels. At the individual Programme level, the review was to comment on the relevance, calibre and impact of programmes, concentrating in particular on the following: Relevance - were programme and project level goals in line with Finnish interests and comparable agendas in other countries; Efficiency - how well were the programmes implemented and managed; Quality - how did the scientific and technological quality of the work

  19. EVALUATION OF SOLIDIFICATION/STABILIZATION AS A BEST DEMONSTRATED AVAILABLE TECHNOLOGY FOR CONTAMINATED SOILS

    Science.gov (United States)

    This project involved the evaluation of solidification/stabilization technology as a BDAT for contaminated soil. Three binding agents were used on four different synthetically contaminated soils. Performance evaluation data included unconfined compressive strength (UCS) and the T...

  20. Testing and Evaluating the Effectiveness of Advanced Technologies for Work Zones in Nevada

    Science.gov (United States)

    2008-08-30

    The objective of this study was to evaluate two advanced technologies for improving safety in work zones: 1) speed monitoring display and 2) automatic work zone information system. In the evaluation of the speed monitoring display (also called a spee...

  1. 75 FR 69631 - National Medal of Technology and Innovation Nomination Evaluation Committee Meeting

    Science.gov (United States)

    2010-11-15

    ... Technology and Innovation Nomination Evaluation Committee Meeting AGENCY: United States Patent and Trademark Office, Commerce. ACTION: Notice of closed meeting. SUMMARY: The National Medal of Technology and... Manager, National Medal of Technology and Innovation Program, United States Patent and Trademark Office...

  2. Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

    OpenAIRE

    Maarten Messagie; Kenneth Lebeau; Thierry Coosemans; Cathy Macharis; Joeri van Mierlo

    2013-01-01

    Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventi...

  3. Evaluation of EDAR vehicle emissions remote sensing technology.

    Science.gov (United States)

    Ropkins, Karl; DeFries, Timothy H; Pope, Francis; Green, David C; Kemper, Jim; Kishan, Sandeep; Fuller, Gary W; Li, Hu; Sidebottom, Jim; Crilley, Leigh R; Kramer, Louisa; Bloss, William J; Stewart Hager, J

    2017-12-31

    Despite much work in recent years, vehicle emissions remain a significant contributor in many areas where air quality standards are under threat. Policy-makers are actively exploring options for next generation vehicle emission control and local fleet management policies, and new monitoring technologies to aid these activities. Therefore, we report here on findings from two separate but complementary blind evaluation studies of one new-to-market real-world monitoring option, HEAT LLC's Emission Detection And Reporting system or EDAR, an above-road open path instrument that uses Differential Absorption LIDAR to provide a highly sensitive and selective measure of passing vehicle emissions. The first study, by Colorado Department of Public Health and Environment and Eastern Research Group, was a simulated exhaust gas test exercise used to investigate the instrumental accuracy of the EDAR. Here, CO, NO, CH 4 and C 3 H 8 measurements were found to exhibit high linearity, low bias, and low drift over a wide range of concentrations and vehicle speeds. Instrument accuracy was high (R 2 0.996 for CO, 0.998 for NO; 0.983 for CH 4 ; and 0.976 for C 3 H 8 ) and detection limits were 50 to 100ppm for CO, 10 to 30ppm for NO, 15 to 35ppmC for CH 4 , and, depending on vehicle speed, 100 to 400ppmC 3 for C 3 H 8 . The second study, by the Universities of Birmingham and Leeds and King's College London, used the comparison of EDAR, on-board Portable Emissions Measurement System (PEMS) and car chaser (SNIFFER) system measurements collected under real-world conditions to investigate in situ EDAR performance. Given the analytical challenges associated with aligning these very different measurements, the observed agreements (e.g. EDAR versus PEMS R 2 0.92 for CO/CO 2 ; 0.97 for NO/CO 2 ; ca. 0.82 for NO 2 /CO 2 ; and, 0.94 for PM/CO 2 ) were all highly encouraging and indicate that EDAR also provides a representative measure of vehicle emissions under real-world conditions. Copyright

  4. International bulletin on atomic and molecular data for fusion. No. 46

    International Nuclear Information System (INIS)

    Botero, J.

    1993-06-01

    The bulletin is published by the International Atomic Energy Agency to provide atomic and molecular data relevant to fusion research and technology. In Part I the indexed papers are listed separately for (i) structure and spectra (energy levels, wavelengths; transition probabilities, oscillator strengths; interatomic potentials); (ii) atomic and molecular collisions (photon collisions; electron collisions; heavy-particle collisions; homonuclear sequences; isoelectronic sequences), and (iii) surface interactions (sputtering; chemical reactions; trapping and detrapping; surface damage; blistering, flaking; secondary electron emission). Part II contains the bibliographic data for the above listed topics and for high energy laser- and beam-matter interaction; interaction of atomic particles with fields. The atomic and molecular data needs in fusion research, as identified during the IAEA Consultants' Meeting on 'Atomic and Molecular Database for Hydrogen Recycling and Helium Exhaust from Fusion Reactors', June 1992, Vienna, are listed, covering (i) atomic and molecular collision processes, (ii) particle-surface interaction processes, and (iii) the status of data bases on atomic and molecular data and plasma-surface interactions. News on the ALADDIN (A labelled Atomic Data INterface) system is provided. Finally, a list of evaluated atomic and molecular data bases is provided

  5. Definition and compositions of standard wastestreams for evaluation of Buried Waste Integrated Demonstration treatment technologies

    International Nuclear Information System (INIS)

    Bates, S.O.

    1993-06-01

    The Buried Waste Integrated Demonstration (BWID) Project was organized at the Idaho National Engineering Laboratory to support research, development, demonstration, testing, and evaluation of emerging technologies that offer promising solutions to remediation of buried waste. BWID will identify emerging technologies, screen them for applicability to the identified needs, select technologies for demonstration, and then evaluate the technologies based on prescribed performance objectives. The technical objective of the project is to establish solutions to Environmental Restoration and Waste Management's technological deficiencies and improve baseline remediation systems. This report establishes a set of standard wastestream compositions that will be used by BWID to evaluate the emerging technologies. Five wastestreams are proposed that use four types of waste and a nominal case that is a homogenized combination of the four wastes. The five wastestreams will provide data on the compositional extremes and indicate the technologies' effectiveness over the complete range of expected wastestream compositions

  6. Science on Drupal: An evaluation of CMS Technologies

    Science.gov (United States)

    Vinay, S.; Gonzalez, A.; Pinto, A.; Pascuzzi, F.; Gerard, A.

    2011-12-01

    We conducted an extensive evaluation of various Content Management System (CMS) technologies for implementing different websites supporting interdisciplinary science data and information. We chose two products, Drupal and Bluenog/Hippo CMS, to meet our specific needs and requirements. Drupal is an open source product that is quick and easy to setup and use. It is a very mature, stable, and widely used product. It has rich functionality supported by a large and active user base and developer community. There are many plugins available that provide additional features for managing citations, map gallery, semantic search, digital repositories (fedora), scientific workflows, collaborative authoring, social networking, and other functions. All of these work very well within the Drupal framework if minimal customization is needed. We have successfully implemented Drupal for multiple projects such as: 1) the Haiti Regeneration Initiative (http://haitiregeneration.org/); 2) the Consortium on Climate Risk in the Urban Northeast (http://beta.ccrun.org/); and 3) the Africa Soils Information Service (http://africasoils.net/). We are also developing two other websites, the Côte Sud Initiative (CSI) and Emerging Infectious Diseases, using Drupal. We are testing the Drupal multi-site install for managing different websites with one install to streamline the maintenance. In addition, paid support and consultancy for Drupal website development are available at affordable prices. All of these features make Drupal very attractive for implementing state-of-the-art scientific websites that do not have complex requirements. One of our major websites, the NASA Socioeconomic Data and Applications Center (SEDAC), has a very complex set of requirements. It has to easily re-purpose content across multiple web pages and sites with different presentations. It has to serve the content via REST or similar standard interfaces so that external client applications can access content in the CMS

  7. The value of adding regional to local stakeholder involvement in evaluating the acceptability of innovative technologies

    International Nuclear Information System (INIS)

    Peterson, T.S.; McCabe, G.; Niesen, K.; Serie, P.

    1995-02-01

    Technology is urgently needed to clean up contamination by volatile organic compounds at United States Department of Energy (DOE) sites. In many cases, however, existing technology is too slow, inefficient, or expensive. The record of technology development is, in some cases, similarly disappointing. Remediation technologies developed at great expense and evaluated piecemeal over long periods have not been deployed because, in the end, the public judged them ineffective or unacceptable. The need for successful methods of remediation is too great and resources too limited to continue with ineffective technology evaluation. In order to make good decisions about which technologies to deploy, remedial project managers need to know stakeholders' requirements for the performance of proposed technologies. Expanding stakeholder involvement regionally identifies the concerns of a broad range of stakeholders at and DOE sites throughout the West -- issues that must be taken into account if technologies are to be accepted for wide deployment

  8. Improving NASA's technology transfer process through increased screening and evaluation in the information dissemination program

    Science.gov (United States)

    Laepple, H.

    1979-01-01

    The current status of NASA's technology transfer system can be improved if the technology transfer process is better understood. This understanding will only be gained if a detailed knowledge about factors generally influencing technology transfer is developed, and particularly those factors affecting technology transfer from government R and D agencies to industry. Secondary utilization of aerospace technology is made more difficult because it depends on a transfer process which crosses established organizational lines of authority and which is outside well understood patterns of technical applications. In the absence of a sound theory about technology transfer and because of the limited capability of government agencies to explore industry's needs, a team approach to screening and evaluation of NASA generated technologies is proposed which calls for NASA, and other organizations of the private and public sectors which influence the transfer of NASA generated technology, to participate in a screening and evaluation process to determine the commercial feasibility of a wide range of technical applications.

  9. 77 FR 15997 - National Medal of Technology and Innovation Nomination Evaluation Committee Charter Renewal

    Science.gov (United States)

    2012-03-19

    ...] National Medal of Technology and Innovation Nomination Evaluation Committee Charter Renewal AGENCY: United States Patent and Trademark Office, Commerce. ACTION: Notice. SUMMARY: The Chief Financial Officer and... Administration, renewed the Charter for the National Medal of Technology and Innovation Nomination Evaluation...

  10. Evaluation of technology transferring: The experiences of the first Navy Domestic Technology Transfair. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1989-12-31

    In August 1989 the Office of the Chief of Naval Research and the American Defense Preparedness Association conducted the first Navy Domestic Technology Transfair. The objective of the Transfair was to expose the US Navy`s years of solid experience across a broad span of technology to organizations outside of the Navy. It was an opportunity for private industry to capitalize on the Navy developed technology and this opening for industry was the primary focus of the Transfair. The event provided a unique forum to meet leading Navy scientific and engineering innovators face-to-face. Information was available concerning licensing of naval technology that was for sale to the private sector. Further, discussions covered opportunities for new cooperative research and development agreements with Navy laboratories and R&D activities. These agreements were authorized under the Federal Technology Transfer Act of 1986. The Transfair program was conducted in such a manner as to allow each Navy inventor, either scientist or engineer, to present a system, piece of hardware, or licensable concept in a formal paper presentation. Then, the Navy inventors were available in two, two-hour periods in which individual discussions were conducted, with attendees pursuing specific venues of cooperative agreements as desired. This report provides specifics concerning the technologies that were made available for transfer to the private sector during the Transfair. The Transfair concept sought to add special emphasis to the opening that the 1988 Technology Transfer Act brought to the marketplace. The experience was a step in the education of the possibilities for cooperation between the government and the private sector to share technology. Of additional significance is the economic enhancement for business expansion with the application of the technology to markets beyond defense.

  11. Evaluation of Irrigation Technology Adoption in Edo State Nigeria

    Directory of Open Access Journals (Sweden)

    Imanogor P. A.

    2016-10-01

    Full Text Available The acceptance and continuous use of any innovation is the ultimate objective of extension programme. However, extension efforts have failed to avail farmers with some beneficial research-based agricultural technology. There are various factors which predispose farmers to the adoption of any innovation. This study was carried out to find out what factors would favourably dispose farmers to the adoption of irrigation technology. The study was done in the three senatorial districts of Edo State. A total of one hundred and fifty farmers were interviewed of which fifty nine were adopters of irrigation technology. Personal characteristics of farmers which were found to significantly influence the adoption of the innovation include farm size, level of education, social participation and contact with extension agents with a significant index value of 0.88. However the required impact desired through extension service is yet to be appreciated.

  12. Evaluation of the efficiency of alternative enzyme production technologies

    DEFF Research Database (Denmark)

    Albæk, Mads Orla

    production of cellulases and hemi-cellulases. The aim of the thesiswas to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process...... was carried out in pilot scale stirred tank reactors and based on a range of different process conditions, a process model was constructed which satisfactory described the course of fermentation. The process was governed by the rate limiting mass transfer of oxygen from the gas to the liquid phase. During...... of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative fermentation technologies for enzyme production were identified in the open literature. Their mass transfer capabilities and their energy efficiencies were...

  13. Research evaluation of mechanical cutting technology of mulberry branch

    Directory of Open Access Journals (Sweden)

    Zhanhua SONG

    2016-12-01

    Full Text Available China is the world's largest silkworm cocoon and raw silk producer and exporter. However, as the labor price increases quickly, the sericulture production costs increases, the comparative benefits of sericulture production decreases, and the farmers' enthusiasm in mulberry planting becomes lower. To solve the problem, aiming at the low level of mechanical harvesting and cutting technology of mulberry branch in China, on the basis of discussing the cutting damage forms of mulberry stool in zhe progress of mechanical harvesting muiberry branch, the existing problems and the present situation of the research of cutting technology of mulberry branch and others crop stalks are analyzed. The developmental trend of the mechanical cutting technology of mulberry branch is put formward.

  14. Risk Evaluation of Business Continuity Management by Using Green Technology

    Science.gov (United States)

    Gang, Chen

    IT disasters can be seen as the test of the ability in communities and firms to effectively protect their information and infrastructure, to reduce both human and property loss, and to rapidly recover. In this paper, we use a literature meta-analysis method to identify potential research directions in Green Business Continuity Management (GBCM). The concept and characteristics of GBCM are discussed. We analysis the connotation and the sources of green technology risk. An assessment index system is established from the perspectives of GBCM. A fuzzy comprehensive assessment method is introduced to assess the risks of green technology in Business Continuity Management.

  15. A methodology for evaluating ''new'' technologies in nuclear power plants

    International Nuclear Information System (INIS)

    Korsah, K.; Clark, R.L.; Holcomb, D.E.

    1994-01-01

    As obsolescence and spare parts issues drive nuclear power plants to upgrade with new technology (such as optical fiber communication systems), the ability of the new technology to withstand stressors present where it is installed needs to be determined. In particular, new standards may be required to address qualification criteria and their application to the nuclear power plants of tomorrow. This paper discusses the failure modes and age-related degradation mechanisms of fiber optic communication systems, and suggests a methodology for identifying when accelerated aging should be performed during qualification testing

  16. [Evaluation of new technologies PET/CT nuclear imaging].

    Science.gov (United States)

    Giraldes, Maria Rosário

    2010-01-01

    Nuclear imaging has used initially anatomic and volumetric technologies as CT or MRI. In recent years new dimensions of non invasive studies, as PET, have shown a higher utility in the effectiveness of the treatment. The evaluation of need must be done according to a principle of Horizontal Equity, equal treatment for equal need and of a principle of Vertical Equity, Different treatment, at regional level, according to each hospital level. The evaluation of need has been made according to the Potential Demand by Potential User Groups: diabetes, type 2, (50 years and more); screening colorectal (50 years and more); morbidity by cancer; surgery of lung cancer; cardiology; heart surgery; acute chest pain in the emergency department. In a Macro Perspective need has been evaluated using the Population Estimations for 2007, at municipality level. Relatively to Lisbon and Porto data at locality level has been used, from the 2001 Census. According to Campos, J.R. (2007), in 2006, it existed 1 PET by 1 million inhabitants and after that date 2 more were created (Quadrantes and Hospital ad Luz), belonging to the private sector. Mores 15 PET are needed in the NHS, 1 PET for about 504128 inhabitants. According to The Potential Demand perspective 18 new PET are needed, 15 from the public sector. The private sector will cover progressively the demand. Dorado and Albertino (2002), in Spain, mention that the introduction of this new technique in our Health System must be done slowly due to the cost and complexity. In Portugal exists already 6 PET and this applies also. As a first priority the intervention in Oncology in the IPO (Coimbra). A priority must be given to the University Hospitals of Santa Maria and São João. The Central Hospitals of Viseu and VilaReal/Régua must have also 1 PET. A priority must be given to the interior in order to avoid transports of patients and families. In fourth place the HC Central Lisbon must have also 1 PET, which will go to the New Hospital

  17. Orchestration in Learning Technology Research: Evaluation of a Conceptual Framework

    Science.gov (United States)

    Prieto, Luis P.; Dimitriadis, Yannis; Asensio-Pérez, Juan I.; Looi, Chee-Kit

    2015-01-01

    The term "orchestrating learning" is being used increasingly often, referring to the coordination activities performed while applying learning technologies to authentic settings. However, there is little consensus about how this notion should be conceptualised, and what aspects it entails. In this paper, a conceptual framework for…

  18. Expert system for economic evaluation of technological projects

    Directory of Open Access Journals (Sweden)

    Bohumil Hlavenka

    2001-01-01

    Full Text Available Apart from the technical level, a basic tool for decision-making and realization of the technical innovation project is also its economic effectiveness. It is assessed by comparing expenses and effects with respect to all-society interests and standards valid in a relevant period for the areas of technology, economy, ecology, safety of work, etc.

  19. Keeping Women Students in Technology: Preliminary Evaluation of an Intervention

    Science.gov (United States)

    Wasburn, Mara H.; Miller, Susan G.

    2008-01-01

    Increasingly, companies and corporations are seeking to diversify areas of their workforce that are predominantly male. Many of the positions in these areas are highly technical. However, despite abundant opportunities, women are not preparing themselves for technology-related careers. To develop a first step toward addressing this problem, a…

  20. BIOSENSOR TECHNOLOGY EVALUATIONS FOR REAL-TIME/SOURCE WATER PROTECTION

    Science.gov (United States)

    Recent advances in electronics and computer technology have made great strides in the field of remote sensing and biomonitoring. The quality of drinking water sources has come under closer scrutiny in recent years. Issues ranging from ecological to public health and national se...

  1. Evaluating Recommender Systems for Technology Enhanced Learning: A Quantitative Survey

    Science.gov (United States)

    Erdt, Mojisola; Fernandez, Alejandro; Rensing, Christoph

    2015-01-01

    The increasing number of publications on recommender systems for Technology Enhanced Learning (TEL) evidence a growing interest in their development and deployment. In order to support learning, recommender systems for TEL need to consider specific requirements, which differ from the requirements for recommender systems in other domains like…

  2. Sodium-bearing Waste Treatment Technology Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Charles M. Barnes; Arlin L. Olson; Dean D. Taylor

    2004-05-01

    Sodium-bearing waste (SBW) disposition is one of the U.S. Department of Energy (DOE) Idaho Operation Office’s (NE-ID) and State of Idaho’s top priorities at the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL has been working over the past several years to identify a treatment technology that meets NE-ID and regulatory treatment requirements, including consideration of stakeholder input. Many studies, including the High-Level Waste and Facilities Disposition Environmental Impact Statement (EIS), have resulted in the identification of five treatment alternatives that form a short list of perhaps the most appropriate technologies for the DOE to select from. The alternatives are (a) calcination with maximum achievable control technology (MACT) upgrade, (b) steam reforming, (c) cesium ion exchange (CsIX) with immobilization, (d) direct evaporation, and (e) vitrification. Each alternative has undergone some degree of applied technical development and preliminary process design over the past four years. This report presents a summary of the applied technology and process design activities performed through February 2004. The SBW issue and the five alternatives are described in Sections 2 and 3, respectively. Details of preliminary process design activities for three of the alternatives (steam reforming, CsIX, and direct evaporation) are presented in three appendices. A recent feasibility study provides the details for calcination. There have been no recent activities performed with regard to vitrification; that section summarizes and references previous work.

  3. Technology evaluation: HPV vaccine (quadrivalent), Aventis Pasteur MSD/CSL.

    Science.gov (United States)

    Reinis, Milan

    2004-04-01

    CSL, licensee of UniQuest's HPV technology, and Aventis Pasteur MSD (a joint venture between Merck & Co and Aventis) are jointly developing a vaccine for the potential prophylaxis of genital warts and cervical cancer caused by human papilloma virus infection. Enrollment for a phase III trial has been completed.

  4. Evaluating the Impact of Technology Integration in Teaching and Learning

    Science.gov (United States)

    Adedokun-Shittu, Nafisat Afolake; Shittu, Abdul Jaleel Kehinde

    2014-01-01

    This article reports the impacts of technology integration on teaching and learning from a study that examines the impact of ICT deployment in teaching and learning at a University in Nigeria. The survey data were drawn from 593 respondents (students and lecturers) and the survey instrument employed for both the students and the lecturers is a…

  5. In vivo evaluation on organ degeneration using radiation technology

    International Nuclear Information System (INIS)

    Kim, Sung Ho; Moon, C. J.; Kim, S. R.

    2010-05-01

    The purpose of this study is to investigate the effect of developed product on skin and reproductive system of animal due to irradiation via in vivo test, and finally acquire fundamental data for evaluation of protective materials on degenerative damages. - Evaluate the effect of candidate materials on UV-induced skin damages · Test the effect of candidate materials to protect the skin from photodamage, the gross and microscopic changes in the skin of hairless mice and materials-treated mice exposed chronically to UV - Evaluate the effect of developed product (HemoHIM) on radiation-induced reproductive system (female) damages - Evaluate the effect of developed product (HemoHIM) on chemical-induced reproductive system (female) damages - Evaluate the effect of developed product (HemoHIM) on radiation-induced reproductive system (male) damages - Evaluate the effect of developed product (HemoHIM) on chemical-induced reproductive system (male) damages

  6. An evaluation of the dismantling technologies for decommissioning of nuclear power plants

    International Nuclear Information System (INIS)

    Jeong, KwanSeong; Choi, ByungSeon; Moon, Jeikwon; Hyun, Dongjun; Lee, JongHwan; Kim, IkJune; Kim, GeunHo; Seo, JaeSeok

    2014-01-01

    Highlights: • This paper is evaluation method on the technologies for decommissioning of nuclear power plants. • The parameters of evaluation are performance, site-specific, safety, and cost impacts. • The evaluation model was applied for dismantling of a steam generator. - Abstract: This paper is to suggest an evaluation method on the dismantling technologies for decommissioning of nuclear power plants. The parameters of evaluation are performance impacts, site-specific impacts, safety impacts, and cost impacts. The evaluation model was provided and applied for dismantling of a steam generator

  7. An Orchestrating Evaluation of Complex Educational Technologies: a Case Study of a CSCL System

    Directory of Open Access Journals (Sweden)

    Luis P. Prieto

    2014-06-01

    Full Text Available As digital technologies permeate every aspect of our lives, the complexity of the educational settings, and of the technological support we use within them, unceasingly rises. This increased complexity, along with the need for educational practitioners to apply such technologies within multi-constraint authentic settings, has given rise to the notion of technology-enhanced learning practice as “orchestration of learning”. However, at the same time, the complexity involved in evaluating the benefits of such educational technologies has also increased, prompting questions about the way evaluators can cope with the different places, technologies, informants and issues involved in their evaluation activity. By proposing the notion of “orchestrating evaluation”, this paper tries to reconcile the often disparate “front office accounts” of research publications and the “shop floor practice” of evaluation of educational technology, through the case study of evaluating a system to help teachers in coordinating computer-supported collaborative learning (CSCL scenarios. We reuse an internationally-evaluated conceptual framework of “orchestration aspects” (design, management, adaptation, pragmatism, etc. to structure the case‟s narrative, showing how the original evaluation questions and methods were modulated in the face of the multiple (authentic evaluation setting constraints.

  8. Mixed Waste Integrated Program interim evaluation report on thermal treatment technologies

    International Nuclear Information System (INIS)

    Gillins, R.L.; DeWitt, L.M.; Wollerman, A.L.

    1993-02-01

    The Mixed Waste Integrated Program (MWIP) is one of several US Department of Energy (DOE) integrated programs established to organize and coordinate throughout the DOE complex the development of technologies for treatment of specific waste categories. The goal of the MWIP is to develop and deploy appropriate technologies for -the treatment of DOE mixed low-level and alpha-contaminated wastes in order to bring all affected DOE installations and projects into compliance with environmental laws. Evaluation of treatment technologies by the MWIP will focus on meeting waste form performance requirements for disposal. Thermal treatment technologies were an early emphasis for the MWIP because thermal treatment is indicated (or mandated) for many of the hazardous constituents in DOE mixed waste and because these technologies have been widely investigated for these applications. An advisory group, the Thermal Treatment Working Group (TTWG), was formed during the program's infancy to assist the MWIP in evaluating and prioritizing thermal treatment technologies suitable for development. The results of the overall evaluation scoring indicate that the four highest-rated technologies were rotary kilns, slagging kilns, electric-arc furnaces, and plasma-arc furnaces. The four highest-rated technologies were all judged to be applicable on five of the six waste streams and are the only technologies in the evaluation with this distinction. Conclusions as to the superiority of one technology over others are not valid based on this preliminary study, although some general conclusions can be drawn

  9. International bulletin on atomic and molecular data for fusion. No. 60

    International Nuclear Information System (INIS)

    Stephens, J.A.; Bannister, M.E.; Delcroix, J.L.; Fuhr, J.

    2001-06-01

    This bulletin comprises updated atomic and molecular data for fusion. It includes the Atomic and Molecular Data Information System (AMDIS) of the IAEA. It contains two parts: a bibliographic database for atomic and molecular data for fusion research, and numerical databases of recommended and evaluated atomic, molecular and plasma-surface interaction data. The indexed papers are also listed separately for structure and spectra, atomic and molecular collisions, and surface interactions

  10. Y-12 Plant Remedial Action technology logic diagram. Volume I: Technology evaluation

    International Nuclear Information System (INIS)

    1994-09-01

    The Y-12 Plant Remedial Action Program addresses remediation of the contaminated groundwater, surface water and soil in the following areas located on the Oak Ridge Reservation: Chestnut Ridge, Bear Creek Valley, the Upper and Lower East Fork Popular Creek Watersheds, CAPCA 1, which includes several areas in which remediation has been completed, and CAPCA 2, which includes dense nonaqueous phase liquid wells and a storage facility. There are many facilities within these areas that are contaminated by uranium, mercury, organics, and other materials. This Technology Logic Diagram identifies possible remediation technologies that can be applied to the soil, water, and contaminants for characterization, treatment, and waste management technology options are supplemented by identification of possible robotics or automation technologies. These would facilitate the cleanup effort by improving safety, of remediation, improving the final remediation product, or decreasing the remediation cost. The Technology Logic Diagram was prepared by a diverse group of more than 35 scientists and engineers from across the Oak Ridge Reservation. Most are specialists in the areas of their contributions. 22 refs., 25 tabs

  11. Y-12 Plant Remedial Action technology logic diagram. Volume I: Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Program addresses remediation of the contaminated groundwater, surface water and soil in the following areas located on the Oak Ridge Reservation: Chestnut Ridge, Bear Creek Valley, the Upper and Lower East Fork Popular Creek Watersheds, CAPCA 1, which includes several areas in which remediation has been completed, and CAPCA 2, which includes dense nonaqueous phase liquid wells and a storage facility. There are many facilities within these areas that are contaminated by uranium, mercury, organics, and other materials. This Technology Logic Diagram identifies possible remediation technologies that can be applied to the soil, water, and contaminants for characterization, treatment, and waste management technology options are supplemented by identification of possible robotics or automation technologies. These would facilitate the cleanup effort by improving safety, of remediation, improving the final remediation product, or decreasing the remediation cost. The Technology Logic Diagram was prepared by a diverse group of more than 35 scientists and engineers from across the Oak Ridge Reservation. Most are specialists in the areas of their contributions. 22 refs., 25 tabs.

  12. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part A, Decontamination and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Strategic Roadmap for the Oak Ridge Reservation is a generalized planning document that identifies broad categories of issues that keep ORNL outside full compliance with the law and other legally binding agreements. Possible generic paths to compliance, issues, and the schedule for resolution of the issues one identified. The role of the Oak Ridge National Laboratory Technology Logic Diagram (TLD) is then to identify specific site issues (problems), identify specific technologies that can be brought to bear on the issues, and assess the current status and readiness of these remediation technologies within the constraints of the schedule commitment. Regulatory requirements and commitments contained in the Strategic Roadmap for the Oak Ridge Reservation are also included in the TLD as constraints to the application of immature technological solutions. Some otherwise attractive technological solutions may not be employed because they may not be deployable on the schedule enumerated in the regulatory agreements. The roadmap for ORNL includes a list of 46 comprehensive logic diagrams for WM of low-level, radioactive-mixed, hazardous, sanitary and industrial. and TRU waste. The roadmapping process gives comparisons of the installation as it exists to the way the installation should exist under full compliance. The identification of the issues is the goal of roadmapping. This allows accurate and timely formulation of activities.

  13. Publication of the bulletin in 2009

    CERN Multimedia

    DG Unit

    2009-01-01

    The table below lists the 2009 publication dates for the paper version of the Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12.00 midday on Tuesdays at the latest. Bulletin No. Week number Submission of announcements (before 12.00 midday) Publication date 3-4 Tuesday 6 January Monday 12 January 5-6 Tuesday 20 January Monday 26 January 7-8 Tuesday 3 February Monday 9 February 9-10 Tuesday 17 February Monday 23 February 11-12 Tuesday 3 March Monday 9 March 13-14 Tuesday 17 March Monday 23 March 15-16-17 (Easter issue) Tuesday 31 March Monday 6 April 18-19 Tuesday 21 April Monday 27 April 20-21 Tuesday 5 May Monday 11 May 22-23 Tuesday 19 May Monday 25 May 24-25 ...

  14. Evaluating the impacts of energy supply technology options

    International Nuclear Information System (INIS)

    Peachey, B.R.

    2009-01-01

    The newly formed Chemical Institute of Canada (CIC)/Canadian Society for Chemical Engineering (CSChE) Energy Subject Division is working to develop a methodology for assessing and communicating to governments, regulators and the public the relative merits of different technologies for meeting energy demand requirements or reducing energy consumption. The focus is on developing a process that considers a broader range of issues than basic economics, or greenhouse gas (GHG) emissions. The 12 assessment criteria proposed would address five major areas of concerns including: a) how well assumptions have been tested against the scientific method over the life cycle of an energy development, b) impacts on the availability of the basic requirements for life, c) maintaining the quality of human life, d) maintaining the quality of the local environment (air, land and water), in the area where a specific technology is used, and e) considers the potential global impacts of GHG emissions. (author)

  15. Evaluating business models for microgrids: Interactions of technology and policy

    International Nuclear Information System (INIS)

    Hanna, Ryan; Ghonima, Mohamed; Kleissl, Jan; Tynan, George; Victor, David G.

    2017-01-01

    Policy makers are increasingly focused on strategies to decentralize the electricity grid. We analyze the business model for one mode of decentralization—microgrids—and quantify the economics for self-supply of electricity and thermal energy and explicitly resolve technological as well as policy variables. We offer a tool, based on the Distributed Energy Resources Customer Adoption Model (DER-CAM) modeling framework, that determines the cost-minimal capacity and operation of distributed energy resources in a microgrid, and apply it in southern California to three “iconic” microgrid types which represent typical commercial adopters: a large commercial building, critical infrastructure, and campus. We find that optimal investment leads to some deployment of renewables but that natural gas technologies underpin the most robust business cases—due in part to relatively cheap gas and high electricity rates. This finding contrasts sharply with most policy advocacy, which has focused on the potentials for decentralization of the grid to encourage deployment of renewables. Decentralization could radically reduce customer energy costs, but without the right policy framework it could create large numbers of small decentralized sources of gas-based carbon emissions that will be difficult to control if policy makers want to achieve deep cuts in greenhouse gas emissions. - Highlights: • We offer a modeling tool to study technology and policy variables for microgrids. • We construct comprehensive load profiles for three likely adopters of microgrids. • Investment in natural gas generators is key to enabling business models. • Solar PV and storage are optimal but as supplements to gas generation. • Business models are highly robust to sensitivity in technology and policy variables.

  16. Comparative Evaluation of Display Technologies for Collaborative Design Review

    Science.gov (United States)

    2009-04-01

    kinesthetic , force, and tactile feedback using a Pinch glove, joystick, or other input devices (e.g., Dede, Salzman, & Loftmn, 1996; Werkhoven & Groen, 1998...display technologies track and update the visual scene based on an observer’s head or eye movements (Kocian & Task, 1995). These features produce a...pushed exclusively via eye movements , while involving minimal cognitive or physical effort. In some systems, a search must be accomplished using a control

  17. Evaluation of metrology technologies for free form surfaces

    DEFF Research Database (Denmark)

    Arámbula, K.; Siller, H.R.; De Chiffre, Leonardo

    2012-01-01

    This research work describes a novel approach for comparing different technologies for free form surface metrology: computerized tomography (CT), photogrammetry and coordinate measuring machines (CMM). The comparison has the aim of providing relevant information for the selection of metrology...... equipment when measuring free form components. Results demonstrate that there is the imperative need to assess the uncertainty and reproducibility of CT and photogrammetry measurements by applying some calibration procedures taking into account some recommendations for work piece alignment. This article...

  18. Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

    Directory of Open Access Journals (Sweden)

    Maarten Messagie

    2013-11-01

    Full Text Available Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventional petrol and diesel vehicles. The assessments are done from a life cycle perspective. The effect on human health, resources and ecosystems is considered when calculating the environmental impact. The total cost of ownership (TCO model includes the purchase price, registration and road taxes, insurance, fuel or electricity cost, maintenance, tires replacement, technical control, battery leasing and battery replacement. In the presented analysis different vehicle technologies and fuels are compared (petrol, diesel, hybrid electric vehicles (HEVs, battery electric vehicles (BEVs and plug-in hybrid electric vehicles (PHEVs on their level of environmental impact and cost per kilometer. The analysis shows a lower environmental impact for electric vehicles. However, electric vehicles have a higher total cost of ownership compared to conventional vehicles, even though the fuel operating costs are significantly lower. The purchase cost of electric vehicles is highly linked to the size of the battery pack, and not to the size of the electric vehicle. This explains the relative high cost for the electric city cars and the comparable cost for the medium and premium cars.

  19. Economic Research Bulletin (2012, No.2)

    OpenAIRE

    Česká národní banka

    2012-01-01

    The importance of analysing the interactions between financial stability and monetary policy and its effects on macroeconomic fluctuations has risen substantially during the current financial crisis. This edition of the Research Bulletin is focused on five articles which analyse these interactions from various angles. The first article examines the effect of tighter macroprudential and monetary policies on output. According to this research, in comparison to monetary policy, macroprudential p...

  20. HyQue: evaluating hypotheses using Semantic Web technologies

    Directory of Open Access Journals (Sweden)

    Callahan Alison

    2011-05-01

    Full Text Available Abstract Background Key to the success of e-Science is the ability to computationally evaluate expert-composed hypotheses for validity against experimental data. Researchers face the challenge of collecting, evaluating and integrating large amounts of diverse information to compose and evaluate a hypothesis. Confronted with rapidly accumulating data, researchers currently do not have the software tools to undertake the required information integration tasks. Results We present HyQue, a Semantic Web tool for querying scientific knowledge bases with the purpose of evaluating user submitted hypotheses. HyQue features a knowledge model to accommodate diverse hypotheses structured as events and represented using Semantic Web languages (RDF/OWL. Hypothesis validity is evaluated against experimental and literature-sourced evidence through a combination of SPARQL queries and evaluation rules. Inference over OWL ontologies (for type specifications, subclass assertions and parthood relations and retrieval of facts stored as Bio2RDF linked data provide support for a given hypothesis. We evaluate hypotheses of varying levels of detail about the genetic network controlling galactose metabolism in Saccharomyces cerevisiae to demonstrate the feasibility of deploying such semantic computing tools over a growing body of structured knowledge in Bio2RDF. Conclusions HyQue is a query-based hypothesis evaluation system that can currently evaluate hypotheses about the galactose metabolism in S. cerevisiae. Hypotheses as well as the supporting or refuting data are represented in RDF and directly linked to one another allowing scientists to browse from data to hypothesis and vice versa. HyQue hypotheses and data are available at http://semanticscience.org/projects/hyque.

  1. CERN Bulletin publication schedule for 2016

    CERN Multimedia

    2015-01-01

    The table below lists the 2016 publication dates for the CERN Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12 noon on Tuesdays at the latest.   Bulletin No. (corresponding to the week number) Submission deadline for announcements (before 12 noon) Publication of Bulletin (web version) 3-4 Tuesday 12 January Friday 15 January 5-6 Tuesday 26 January Friday 29 January 7-8 Tuesday 9 February Friday 12 February 9-10 Tuesday 23 February Friday 26 February 11-12 Tuesday 8 March Friday 11 March 13-14 MONDAY 21 March THURSDAY 24 March 15-16 Tuesday 5 April Friday 8 April 17-18-19 Tuesday 19 April Friday 22 April 20-21 Tuesday 10 May Friday 13 May 22-23 Tuesday 24 May Friday 27 May 24-25 Tuesday 7 June Friday 10 June 26-27 Tuesday 21 June Friday 24 June 28-29 Tuesday 5 July Friday 8 July 30-31-32 Tuesday 19 July Friday 22 July 33-34-35 Tuesday 9 August Friday 12 August 3...

  2. CERN Bulletin publication schedule for 2015

    CERN Multimedia

    2014-01-01

    The table below lists the 2015 publication dates for the CERN Bulletin and the corresponding deadlines for the submission of announcements. Please note that all announcements must be submitted by 12 noon on Tuesdays at the latest.   .tftable {font-size:12px;color:#333333;width:100%;border-width: 1px;border-color: #a9a9a9;border-collapse: collapse;} .tftable th {font-size:12px;background-color:#b8b8b8;border-width: 1px;padding: 8px;border-style: solid;border-color: #a9a9a9;text-align:left;} .tftable tr {background-color:#ffffff;} .tftable td {font-size:12px;border-width: 1px;padding: 8px;border-style: solid;border-color: #a9a9a9;} .tftable tr:hover {background-color:#ffff99;} Bulletin No. (corresponding to the week number) Submission deadline for announcements (before 12 noon) Publication of Bulletin (web version) 4-5 Tuesday 13 January Friday 16 January 6-7 Tuesday 26 January Friday 30 January 8-9 Tuesday 10 February Friday 13 February 10-11 Tuesday 24 February ...

  3. Welcome to the new eBulletin!

    CERN Multimedia

    Corinne Pralavorio

    You are now reading one of the new sections of the new eBulletin launched this week. Entitled "What's New", this section will allow us to tell you about important news and events when they occur, without having to wait for a new Bulletin update. So, when the Higgs Boson is discovered, you will be among the first to know! This column will also contain links to the new items included in the weekly update of the electronic Bulletin. Under this section, you will find several other practical sections:"Four Your Eyes Only", presenting a striking photo or a video, "What's on Today", detailing the day's seminars and other events, and "Under the CERN Sky", giving the latest weather information. There is also a list of useful links at the bottom of the column. Concerning your usual section: the "News Articles" can be accessed directly from links on the home page, while other information items are accessible from the relevant menu headings. In addition, you will now find a set of tools at the end of each article, enabli...

  4. Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

    Science.gov (United States)

    Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

    2018-01-05

    Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

  5. Oak Ridge K-25 Site Technology Logic Diagram. Volume 1, Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. This Volume, Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume is divided into ten chapters. The first chapter is a brief introduction, and the second chapter details the technical approach of the TLD. These categories are the work activities necessary for successful decontamination and decommissioning, waste management, and remedial action of the K-25 Site. The categories are characterization, decontamination, dismantlement, robotics and automation, remedial action, and waste management. Materials disposition is addressed in Chap. 9. The final chapter contains regulatory compliance information concerning waste management, remedial action, and decontamination and decommissioning.

  6. Methodology for evaluation of railroad technology research projects

    Science.gov (United States)

    1981-04-01

    This Project memorandum presents a methodology for evaluating railroad research projects. The methodology includes consideration of industry and societal benefits, with special attention given to technical risks, implementation considerations, and po...

  7. Bulletin of Animal Health and Production in Africa

    African Journals Online (AJOL)

    The Bulletin of Animal Health and Production in Africa publishes articles on original research relevant to animal health and production activities which may lead to the improvement of the livestock industry in Africa and better utilisation of her animal resources. Le Bulletin de la Santé et de la Production animales en Afrique ...

  8. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. C Ghanshyam. Articles written in Bulletin of Materials Science. Volume 25 Issue 3 June 2002 pp 231-234 Thin Films. Alcohol sensing of tin oxide thin film prepared by sol–gel process · Sunita Mishra C Ghanshyam Nathai Ram Satinder Singh R P Bajpai R K Bedi · More Details ...

  9. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. P A Ramakrishnan. Articles written in Bulletin of Materials Science. Volume 23 Issue 6 December 2000 pp 461-466 Material Synthesis. Microwave synthesis of electrode materials for lithium batteries · M Harish Bhat B P Chakravarthy P A Ramakrishnan A Levasseur K J RAO.

  10. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. J Temuujin. Articles written in Bulletin of Materials Science. Volume 23 Issue 4 August 2000 pp 301-304 Material Synthesis. Thermal formation of corundum from aluminium hydroxides prepared from various aluminium salts · J Temuujin Ts JADAMBAA K J D Mackenzie P ...

  11. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. ANCA DUTA. Articles written in Bulletin of Materials Science. Volume 35 Issue 6 November 2012 pp 997-1002. Influence of solvents on properties of solar selective coatings obtained by spray pyrolysis · Mihaela Dudita Luminita Isac Anca Duta · More Details Abstract Fulltext ...

  12. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Arnab Ganguly. Articles written in Bulletin of Materials Science. Volume 30 Issue 2 April 2007 pp 183-185 Nanomaterials. Synthesis, characterization and gas sensitivity of MoO3 nanoparticles · Arnab Ganguly Raji George · More Details Abstract Fulltext PDF. Nanoparticles of ...

  13. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. VISWADEVARAYALU ANNAVARAM. Articles written in Bulletin of Materials Science. Volume 39 Issue 3 June 2016 pp 759-767. Fabrication of graphene–TiO 2 nanocomposite with improved photocatalytic degradation for acid orange 7 dye under solar light irradiation.

  14. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Qin Yang. Articles written in Bulletin of Materials Science. Volume 37 Issue 5 August 2014 pp 1167-1174. Magnetic-supported cucurbituril: A recyclable adsorbent for the removal of humic acid from simulated water · Qin Yang Ying Jiang Xiaoli Li Yongli Yang Liyun Hu.

  15. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. S Ghatak. Articles written in Bulletin of Materials Science. Volume 24 Issue 2 April 2001 pp 121-124. Mechanical characteristics of microwave sintered silicon carbide · S Mandal A Seal S K Dalui A K Dey S Ghatak A K Mukhopadhyay · More Details Abstract Fulltext PDF.

  16. Agnieszka Sobczak-Kupiec - Bulletin of Materials Science | Indian ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. AGNIESZKA SOBCZAK-KUPIEC. Articles written in Bulletin of Materials Science. Volume 36 Issue 4 August 2013 pp 755-764. Effect of calcination conditions of pork bone sludge on behaviour of hydroxyapatite in simulated body fluid · Agnieszka Sobczak-Kupiec Zbigniew ...

  17. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. QINGSONG YE. Articles written in Bulletin of Materials Science. Volume 41 Issue 1 February 2018 pp 12. Construction of CaF 2 -appended PVA nanofibre scaffold · JIA XU JIANFENG MA YAN HE CHUNHONG LIU QINGSONG YE · More Details Abstract Fulltext PDF.

  18. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. N K PANDEY. Articles written in Bulletin of Materials Science. Volume 40 Issue 2 April 2017 pp 253-262. Electrical and optical properties of ZnO–WO 3 nanocomposite and its application as a solid-state humidity sensor · VANDNA SHAKYA N K PANDEY SUNEET KUMAR ...

  19. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. D D Dung. Articles written in Bulletin of Materials Science. Volume 37 Issue 1 February 2014 pp 19-25. Influence of preparation conditions on superconducting properties of Bi-2223 thin films · N T Mua A Sundaresan N K Man D D Dung · More Details Abstract Fulltext PDF.

  20. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. E Subramanian. Articles written in Bulletin of Materials Science. Volume 25 Issue 7 December 2002 pp 613-618 Polymers. Metal oxalate complexes as novel inorganic dopants: Studies on their effect on conducting polyaniline · R Murugesan E Subramanian · More Details ...

  1. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Rani Joseph. Articles written in Bulletin of Materials Science. Volume 26 Issue 3 April 2003 pp 343-348 Thin Films. Optimization of pH and direct imaging conditions of complexed methylene blue sensitized poly(vinyl chloride) films · M Ushamani N G Leenadeenja K Sreekumar ...

  2. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. J Kathirvelan. Articles written in Bulletin of Materials Science. Volume 38 Issue 4 August 2015 pp 909-913. Detection of methane using multi-walled carbon nanotubes · J Kathirvelan R Vijayaraghavan · More Details Abstract Fulltext PDF. A sensor for detecting and estimating ...

  3. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Bindu Krishnan. Articles written in Bulletin of Materials Science. Volume 28 Issue 3 June 2005 pp 239-242 Thin Films. Screen printed nanosized ZnO thick film · Bindu Krishnan V P N Nampoori · More Details Abstract Fulltext PDF. Nanosized ZnO was prepared by polyol ...

  4. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. K K Gupta. Articles written in Bulletin of Materials Science. Volume 29 Issue 2 April 2006 pp 181-185 Electrical Properties. Dielectric measurements on PWB materials at microwave frequencies · A Tanwar K K Gupta P J Singh Y K Vijay · More Details Abstract Fulltext PDF.

  5. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. DAVOUD DORRANIAN. Articles written in Bulletin of Materials Science. Volume 39 Issue 7 December 2016 pp 1677-1684. Effect of temperature on the characteristics of ZnO nanoparticles produced by laser ablation in water · ELMIRA SOLATI DAVOUD DORRANIAN.

  6. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Li Yajiang. Articles written in Bulletin of Materials Science. Volume 24 Issue 6 December 2001 pp 639-642 Alloys and Steels. Fine structure at the diffusion welded interface of Fe3Al/Q235 dissimilar materials · Wang Juan Li Yajiang Wu Huiqiang · More Details Abstract Fulltext ...

  7. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. V Kannan. Articles written in Bulletin of Materials Science. Volume 37 Issue 1 February 2014 pp 95-99. High mobility polymer gated organic field effect transistor using zinc phthalocyanine · K R Rajesh V Kannan M R Kim Y S Chae J K Rhee · More Details Abstract Fulltext PDF.

  8. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Lalit Kumar. Articles written in Bulletin of Materials Science. Volume 31 Issue 3 June 2008 pp 233-240. Formation of InN nanoparticle and nanorod structures by nitrogen plasma annealing method · Ajay Kumar Mann Deepak Varandani Bodh Raj Mehta Lalit Kumar Malhotra G ...

  9. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. D B Sirdeshmukh. Articles written in Bulletin of Materials Science. Volume 23 Issue 2 April 2000 pp 147-150 Mechanical Properties. Systematic hardness studies on lithium niobate crystals · K G Subhadra K Kishan Rao D B Sirdeshmukh · More Details Abstract Fulltext PDF.

  10. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Harish C Barshilia. Articles written in Bulletin of Materials Science. Volume 26 Issue 2 February 2003 pp 233-237 Thin Films. Deposition of TiN/CrN hard superlattices by reactive d.c. magnetron sputtering · Harish C Barshilia K S Rajam · More Details Abstract Fulltext PDF.

  11. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. D K Avasthi. Articles written in Bulletin of Materials Science. Volume 27 Issue 3 June 2004 pp 263-267 Polymers. Electrical properties of ion irradiated polypropylene films · N L Singh Anita Sharma V Shrinet A K Rakshit D K Avasthi · More Details Abstract Fulltext PDF. The effect ...

  12. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. A Sarkar. Articles written in Bulletin of Materials Science. Volume 23 Issue 4 August 2000 pp 319-324 Polymers. An experimental investigation of electrical conductivities in biopolymers · H Mallick A Sarkar · More Details Abstract Fulltext PDF. Gum arabica obtained from acacia ...

  13. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. S G WAKCHAURE. Articles written in Bulletin of Materials Science. Volume 39 Issue 6 October 2016 pp 1557-1563. Synthesis, characterization and gas sensing performance of aluminosilicate azide cancrinite · A V BORHADE T A KSHIRSAGAR S G WAKCHAURE A G DHOLI.

  14. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. P S Misra. Articles written in Bulletin of Materials Science. Volume 25 Issue 2 April 2002 pp 169-173 Paints. A study on the behaviour of M-type barium hexagonal ferrite based microwave absorbing paints · M R Meshram Nawal K Agrawal Bharoti Sinha P S Misra · More Details ...

  15. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Chandrabhas Narayana. Articles written in Bulletin of Materials Science. Volume 33 Issue 3 June 2010 pp 251-255 Polymers. Effect of substrate roughness on growth of diamond by hot filament CVD · Awadesh K Mallik S R Binu L N Satapathy Chandrabhas Narayana Md Motin ...

  16. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. S A R Hashmi. Articles written in Bulletin of Materials Science. Volume 26 Issue 6 October 2003 pp 579-583 Tribological Materials. Role of PET in improving wear properties of PP in dry sliding condition · Somit Neogi S A R Hashmi Navin Chand · More Details Abstract Fulltext ...

  17. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. N Kumar. Articles written in Bulletin of Materials Science. Volume 29 Issue 4 August 2006 pp 379-384 Composites. Studies on conductivity and dielectric properties of polyaniline–zinc sulphide composites · H C Pant M K Patra S C Negi A Bhatia S R Vadera N Kumar.

  18. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. A U Ubale. Articles written in Bulletin of Materials Science. Volume 28 Issue 1 February 2005 pp 43-47 Thin Films. Preparation and study of thickness dependent electrical characteristics of zinc sulfide thin films · A U Ubale D K Kulkarni · More Details Abstract Fulltext PDF.

  19. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. B Eraiah. Articles written in Bulletin of Materials Science. Volume 29 Issue 4 August 2006 pp 375-378 Ceramics and Glasses. Optical properties of samarium doped zinc–tellurite glasses · B Eraiah · More Details Abstract Fulltext PDF. Glasses with the composition, ...

  20. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. N T Mua. Articles written in Bulletin of Materials Science. Volume 37 Issue 1 February 2014 pp 19-25. Influence of preparation conditions on superconducting properties of Bi-2223 thin films · N T Mua A Sundaresan N K Man D D Dung · More Details Abstract Fulltext PDF.