Sample records for technology development em-50
-
EM-54 Technology Development In Situ Remediation Integrated Program
International Nuclear Information System (INIS)
1993-08-01
The Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of Environmental Restoration and Waste Management (EM) in November 1989. EM manages remediation of all DOE sites as well as wastes from current operations. The goal of the EM program is to minimize risks to human health, safety and the environment, and to bring all DOE sites into compliance with Federal, state, and local regulations by 2019. EM-50 is charged with developing new technologies that are safer, more effective and less expensive than current methods. The In Situ Remediation Integrated Program (the subject of this report) is part of EM-541, the Environmental Restoration Research and Development Division of EM-54. The In Situ Remediation Integrated Program (ISR IP) was instituted out of recognition that in situ remediation could fulfill three important criteria: Significant cost reduction of cleanup by eliminating or minimizing excavation, transportation, and disposal of wastes; reduced health impacts on workers and the public by minimizing exposure to wastes during excavation and processing; and remediation of inaccessible sites, including: deep subsurfaces; in, under, and around buildings. Buried waste, contaminated soils and groundwater, and containerized wastes are all candidates for in situ remediation. Contaminants include radioactive wastes, volatile and non-volatile organics, heavy metals, nitrates, and explosive materials. The ISR IP tends to facilitate development of in situ remediation technologies for hazardous, radioactive, and mixed wastes in soils, groundwater, and storage tanks. Near-term focus is on containment of the wastes, with treatment receiving greater effort in future years
-
International Nuclear Information System (INIS)
Rinker, M.W.; Bamberger, J.A.; Alberts, D.G.
1997-09-01
The Retrieval Process Development and Enhancements (RPD and E) activities are part of the US Department of Energy (DOE) EM-50 Tanks Focus Area, Retrieval and Closure program. The purpose of RPD and E is to understand retrieval processes, including emerging and existing technologies, and to gather data on these processes, so that end users have requisite technical bases to make retrieval decisions. Technologies addressed during FY97 include enhancements to sluicing, the use of pulsed air to assist mixing, mixer pumps, innovative mixing techniques, confined sluicing retrieval end effectors, borehole mining, light weight scarification, and testing of Russian-developed retrieval equipment. Furthermore, the Retrieval Analysis Tool was initiated to link retrieval processes with tank waste farms and tank geometric to assist end users by providing a consolidation of data and technical information that can be easily assessed. The main technical accomplishments are summarized under the following headings: Oak Ridge site-gunite and associated tanks treatability study; pulsed air mixing; Oak Ridge site-Old Hydrofracture Facility; hydraulic testbed relocation; cooling coil cleaning end effector; light weight scarifier; innovative tank mixing; advanced design mixer pump; enhanced sluicing; Russian retrieval equipment testing; retrieval data analysis and correlation; simulant development; and retrieval analysis tool (RAT)
-
The EM technology development strategy
International Nuclear Information System (INIS)
Frank, C.W.; Barainca, M.; Kubo, A.S.
1992-01-01
The Office of Technology Development (TD) supports research and development of technologies that will lower cost, reduce risk, improve safety, and accelerate cleanup of the Nuclear Weapons Complex and provide solutions to currently untractable environmental problems. The TD strategic plan outlines Applied Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) that will provide needed technology products to be used by Environmental Restoration and Waste Management operations (i.e., our customers). The TD strategic plan is derived from EM Goals, Objectives, and Strategy and is incorporated into DOE'S Five-Year Plan for Environmental Restoration and Waste Management. The TD strategic plan is developed based on integrating customer requirements, and is complemented by a top-down, bottom-up analysis of Site Specific Technology Needs and environmental problems. The execution of TD's strategic plan is implemented largely through Integrated Programs (IP) and Integrated Demonstrations (ID). IDs have proven to be a cost-effective method of managing technology development, testing and evaluation, and implementation of successful technology systems into the DOE Environmental Restoration and Waste Management Programs. The Savannah River ID for Volatile Organic Compounds (VOCs) in Saturated Soils resulted in a 51 percent cost savings over stand-alone demonstrations, saving over $8 million. The IPs and IDs are selected based on customer needs, technical complexity, and complex-wide regulatory and compliance agreements. New technology systems are selected for incorporation into an IP or ID from offerings of the DOE laboratories, industry, and the universities. A major TD initiative was announced in August 1991, with the release of a Program Research and Development Announcement (PRDA) requesting industry and universities to propose innovative new technologies to clean up the Weapons Complex. (author)
-
Dynamic partnership: A new approach to EM technology commercialization and deployment
International Nuclear Information System (INIS)
Daly, D.J.; Erickson, T.A.; Groenewold, G.H.
1996-01-01
The cleanup of nuclear defense complex sites under the U.S. Department of Energy (DOE) Environmental Management (EM) Program presents an unprecedented challenge to the environmental sector. Effective and efficient cleanup of EM sites requires the timely development or modification of cleanup technologies. Facilitating the development of technologies to meet DOE goals for site cleanup is the responsibility of EM-50, the EM Program Office of Science and Technology. However, efforts are often arrested at the open-quotes valley of death,close quotes the general term for barriers to demonstration, commercialization, and deployment. The Energy ampersand Environmental Research Center (EERC), a not-for-profit, contract-supported organization focused on research, development, demonstration, and commercialization (RDD ampersand C) of energy and environmental technologies, is in the second year of a Cooperative Agreement with DOE's Morgantown Energy Technology Center (METC) designed to deliver EM technologies into the commercial marketplace through a unique combination of technical support, real-world demonstration, and brokering. This paper profiles this novel approach, termed open-quotes Dynamic Partnership,close quotes and reviews the application of this concept to the ongoing commercialization and deployment of four innovative cleanup technologies
-
Environmental Education and Development Division (EM-522). Annual report, Fiscal year 1993
Energy Technology Data Exchange (ETDEWEB)
1993-12-31
The Environmental Education and Development Division (EM-522) is one of three divisions within the Office of Technology Integration and Environmental Education and Development (EM-52) in Environmental Restoration and Waste Management`s (EM`s) Office of Technology Development (EM-50). The primary design criterion for EM-522 education activities is directly related to meeting EM`s goal of environmental compliance on an accelerated basis and cleanup of the 1989 inventory of inactive sites and facilities by the year 2019. Therefore, EM-522`s efforts are directed specifically toward stimulating knowledge and capabilities to achieve the goals of EM while contributing to DOE`s overall goal of increasing scientific, mathematical, and technical literacy and competency. This report discusses fiscal year 1993 activities.
-
FY-95 technology catalog. Technology development for buried waste remediation
International Nuclear Information System (INIS)
1995-01-01
The US Department of Energy's (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described
-
FY-95 technology catalog. Technology development for buried waste remediation
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-10-01
The US Department of Energy`s (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described.
-
Dynamic partnership: A new approach to EM technology commercialization and deployment
International Nuclear Information System (INIS)
Daly, D.J.; Erickson, T.A.; Groenewold, G.H.
1996-01-01
The task of restoring nuclear defense complex sites under the U.S. Department of Energy (DOE) Environmental Management (EM) Program presents an unprecedented challenge to the environmental restoration community. Effective and efficient cleanup requires the timely development or modification of novel cleanup technologies applicable to radioactive wastes. Fostering the commercialization of these innovative technologies is the mission of EM-50, the EM Program Office of Science and Technology. However, efforts are often arrested at the open-quotes valley of death,close quotes the general term for barriers to demonstration, commercialization, and deployment. The Energy ampersand Environmental Research Center (EERC), a not-for-profit, contract-supported organization focused on research, development, demonstration, and commercialization (RDD ampersand C) of energy and environmental technologies, is in the second year of a cooperative agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) designed to deliver EM technologies into the commercial marketplace through a unique combination of technical support, real-world demonstration, and brokering. This paper profiles this novel approach, termed open-quotes Dynamic Partnership,close quotes and reviews the application of this concept to the ongoing commercialization and deployment of four innovative cleanup technologies. 2 tabs
-
International Nuclear Information System (INIS)
1994-10-01
The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE's goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD's RDDT and E
-
Next wave EM technology : Electromagnetic communication technology continues to progress
International Nuclear Information System (INIS)
Ludwick, J.
1998-01-01
Alpine Oil Services Corp. and Ryan Energy Technologies Inc., have made technological advances in the use of real time electromagnetic (EM) data transmission, using low frequency radio waves to transmit well commands or geological information. The development of the telemetry activated tool was done in two steps. The first technology was real time EM data transmission from the subsurface which used the wellbore to transfer information. The second step was constructing a memory pack which involved an electronic instrument installed in the wellbore which was programmed to perform certain tasks at certain times by transmitting signals back and forth. The use of EM communication allows the geological steering information to come back faster. The EM signal is much faster compared to MWD systems for deeper directional wells. The EM technology also has immediate applications in underbalanced drilling. 1 fig
-
Energy Technology Data Exchange (ETDEWEB)
1994-10-01
The US Department of Energy (DOE) Office of Environmental Management, formerly the Office of Environmental Restoration and Waste Management (EM), was established in November 1989 as the first step toward correcting contamination problems resulting from nearly 50 years of nuclear weapons production and fuel processing activities. EM consolidates several DOE organizations previously responsible for the handling, treatment, and disposition of radioactive and hazardous waste. Within EM, the Office of Technology Development (OTD/EM-50) is responsible for developing technologies to meet DOE`s goal for environmental restoration. OTD manages an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT and E) for environmental cleanup, waste management, and related technologies. The program is designed to resolve major technical issues, to rapidly advanced beyond current technologies for environmental restoration and waste management operations, and to expedite compliance with applicable environmental laws and regulations. This report summarizes Fiscal Year 1994 (FY94) programmatic information, accomplishments, and planned activities relevant to the individual activities within OTD`s RDDT and E.
-
Technology development activities supporting tank waste remediation
International Nuclear Information System (INIS)
Bonner, W.F.; Beeman, G.H.
1994-06-01
This document summarizes work being conducted under the U.S. Department of Energy's Office of Technology Development (EM-50) in support of the Tank Waste Remediation System (TWRS) Program. The specific work activities are organized by the following categories: safety, characterization, retrieval, barriers, pretreatment, low-level waste, and high-level waste. In most cases, the activities presented here were identified as supporting tank remediation by EM-50 integrated program or integrated demonstration lead staff and the selections were further refined by contractor staff. Data sheets were prepared from DOE-HQ guidance to the field issued in September 1993. Activities were included if a significant portion of the work described provides technology potentially needed by TWRS; consequently, not all parts of each description necessarily support tank remediation
-
International Nuclear Information System (INIS)
Jordan, G.B.; Reed, J.H.; Wyler, L.D.
1997-03-01
This report describes the process and results from an effort to develop metrics for program accomplishments for the FY 1997 budget submission of the U.S. Department of Energy Environmental Management International Technology Integration Program (EM-ITI). The four-step process included interviews with key EM-ITI staff, the development of a strawman program logic chart, and all day facilitated workshop with EM-ITI staff during which preliminary performance plans and measures were developed and refined, and a series of follow-on discussions and activities including a cross-organizational project data base. The effort helped EM-ITI to crystallize and develop a unified vision of their future which they can effectively communicate to their own management and their internal and external customers. The effort sets the stage for responding to the Government Performance and Results Act. The metrics developed may be applicable to other international technology integration programs. Metrics were chosen in areas of eight general performance goals for 1997-1998: (1) number of forums provided for the exchange of information, (2) formal agreements signed, (3) new partners identified, (4) customers reached and satisfied, (5, 6) dollars leveraged by EM technology focus area and from foreign research, (7) number of foreign technologies identified for potential use in remediation of DOE sites, and (8) projects advanced through the pipeline
-
Environmental management technology demonstration and commercialization
International Nuclear Information System (INIS)
Daly, D.J.; Erickson, T.A.; Groenewold, G.H.
1995-01-01
The Energy ampersand Environmental Research Center (EERC), a contract-supported organization focused on technology research, development, demonstration, and commercialization (RDD ampersand C), is entering its second year of a Cooperative Agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) to facilitate the development, demonstration, and commercialization of innovative environmental management (EM) technologies in support of the activities of DOE's Office of Environmental Science and Technology (EM-50) under DOE's EM Program. This paper reviews the concept and approach of the program under the METC-EERC EM Cooperative Agreement and profiles the role the program is playing in the commercialization of five EM technologies
-
Environmental management technology demonstration and commercialization
Energy Technology Data Exchange (ETDEWEB)
Daly, D.J.; Erickson, T.A.; Groenewold, G.H. [Energy & Environmental Research Center, Grand Forks, ND (United States)] [and others
1995-10-01
The Energy & Environmental Research Center (EERC), a contract-supported organization focused on technology research, development, demonstration, and commercialization (RDD&C), is entering its second year of a Cooperative Agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) to facilitate the development, demonstration, and commercialization of innovative environmental management (EM) technologies in support of the activities of DOE`s Office of Environmental Science and Technology (EM-50) under DOE`s EM Program. This paper reviews the concept and approach of the program under the METC-EERC EM Cooperative Agreement and profiles the role the program is playing in the commercialization of five EM technologies.
-
Energy Technology Data Exchange (ETDEWEB)
1994-02-01
This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT&E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT&E programs are discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT&E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section.
-
International Nuclear Information System (INIS)
1994-02-01
This report summarizes significant FY93 programmatic information and accomplishments relevant to the individual activities within the Office of Technology Development Program for Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E). A brief discussion of the mission of the Office of Environmental Restoration and Waste Management (EM) and the Office of Technology Development is presented. An overview is presented of the major problem areas confronting DOE. These problem areas include: groundwater and soils cleanup; waste retrieval and processing; and pollution prevention. The organizational elements within EM are highlighted. An EM-50 Funding Summary for FY92 and FY93 is also provided. RDDT ampersand E programs are discussed and their key problem areas are summarized. Three salient program-formulating concepts are explained. They are: Integrated Demonstrations, Integrated Programs, and the technology window of opportunity. Detailed information for each of the programs within RDDT ampersand E is presented and includes a fact sheet, a list of technical task plans and an accomplishments and objectives section
-
Plutonium focus area: Technology summary
International Nuclear Information System (INIS)
1996-03-01
To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this approach, EM developed a management structure and principles that led to creation of specific focus areas. These organizations were designed to focus scientific and technical talent throughout DOE and the national scientific community on major environmental restoration and waste management problems facing DOE. The focus area approach provides the framework for inter-site cooperation and leveraging of resources on common problems. After the original establishment of five major focus areas within the Office of Technology Development (EM-50), the Nuclear Materials Stabilization Task Group (NMSTG, EM-66) followed EM-50's structure and chartered the Plutonium Focus Area (PFA). NMSTG's charter to the PFA, described in detail later in this book, plays a major role in meeting the EM-66 commitments to the Defense Nuclear Facilities Safety Board (DNFSB). The PFA is a new program for FY96 and as such, the primary focus of revision 0 of this Technology Summary is an introduction to the Focus Area; its history, development, and management structure, including summaries of selected technologies being developed. Revision 1 to the Plutonium Focus Area Technology Summary is slated to include details on all technologies being developed, and is currently planned for release in August 1996. The following report outlines the scope and mission of the Office of Environmental Management, EM-60, and EM-66 organizations as related to the PFA organizational structure
-
File list: Oth.EmF.50.Ddit3.AllCell [Chip-atlas[Archive
Lifescience Database Archive (English)
Full Text Available Oth.EmF.50.Ddit3.AllCell mm9 TFs and others Ddit3 Embryonic fibroblast SRX119350,SR...X119351 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.EmF.50.Ddit3.AllCell.bed ...
-
File list: Oth.EmF.50.Epitope_tags.AllCell [Chip-atlas[Archive
Lifescience Database Archive (English)
Full Text Available Oth.EmF.50.Epitope_tags.AllCell mm9 TFs and others Epitope tags Embryonic fibroblas...RX255460,SRX204644,SRX542102,SRX204643,SRX204642 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.EmF.50.Epitope_tags.AllCell.bed ...
-
File list: InP.EmF.50.Input_control.AllCell [Chip-atlas[Archive
Lifescience Database Archive (English)
Full Text Available InP.EmF.50.Input_control.AllCell mm9 Input control Input control Embryonic fibrobla...363,SRX115361 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/InP.EmF.50.Input_control.AllCell.bed ...
-
Technology development and market access: from a food sovereignty perspective
Quaye, W.
2012-01-01
The concepts of ‘<em>relevant social groups’em> and ‘<em>technical code’em> are used to investigate the social relations in cowpea variety development (<em>technology studiesem>) and also the relationship of small-scale farmers to the Ghana School Feeding Program
-
Energy Technology Data Exchange (ETDEWEB)
Collazo, Yvette T.; DeLeon, Gary; Schneider, Steve; Gerdes, Kurt; Szilagyi, Andy [Office of Technology Innovation and Development, U.S. DOE, Washington, DC 20585 (United States); Wellman, Dawn; Bredt, Paul [Pacific Northwest National Laboratory, Richland, Washington 99352 (United States); Pierce, Eric [Oak Ridge National Laboratory, Oak Ridge, Tennessee, 37831 (United States); Marra, Jim [Savannah River National Laboratory, Aiken, South Carolina 29808 (United States)
2012-07-01
Applied research and technology development has the potential to accelerate environmental cleanup and reduce the cost for cleanup and closure of U.S. Department of Energy (DOE) legacy waste sites throughout the United States. Providing the scientific understanding, knowledge, and technologies to enable successful completion of the DOE Office of Environmental Management (EM) mission, the Technology Innovation and Development program is transforming science and innovation into practical solutions for environmental cleanup. Through integration, collaboration, and communication with DOE partner organization, DOE site managers and contractors, these technologies will reduce human health and environmental risk, cost, and time associated with cleanup and closure. The Office of Technology Innovation and Development (OTID) focused efforts in fiscal year 2011 (FY 2011) to a proactive, visionary program balance with integrated, cross-disciplinary applied research and technology development activities. This transition provides the necessary scientific and technical advancements to address near-term needs. In addition, it fills the critical role in providing scientific approaches and advanced technologies that look beyond today's known needs and requirements to provide innovative technologies to make the necessary long-term changes required to facilitate cleanup and bring sites to closure. The outcomes and impacts of this strategy are summarized in the Impact Plan, which describes potential reduction in life-cycle costs through the development and deployment of advanced technologies supporting EM needs associated with waste processing, groundwater and soil remediation, deactivation and decommissioning, and spent nuclear fuel and materials disposition. Additionally, the OTID International Program Strategic Plan 2010-2015 outlines cooperation and collaboration with the international community that has similar nuclear legacy management experience and expertise to foster
-
International Nuclear Information System (INIS)
Rinker, M.W.; Bamberger, J.A.; Hatchell, B.K.
1996-09-01
The Retrieval Process Development and Enhancements (RPD ampersand E) activities are part of the Retrieval and Closure Program of the U.S. Department of Energy (DOE) EM-50 Tanks Focus Area. The purposes of RPD ampersand E are to understand retrieval processes, including emerging and existing technologies, and to gather data on those processes, so that end users have the requisite technical basis to make retrieval decisions. Work has been initiated to support the need for multiple retrieval technologies across the DOE complex. Technologies addressed during FY96 focused on enhancements to sluicing, borehole mining, confined sluicing retrieval end effectors, the lightweight scarifier, and pulsed air mixing. Furthermore, a decision tool and database have been initiated to link retrieval processes with tank closure to assist end users in making retrieval decisions
-
D and D technology development program
International Nuclear Information System (INIS)
Hyde, J.M.
1998-01-01
This paper describes the content of the current program of work for the Deactivation and Decommissioning Focus Area (DDFA) located in the Office of Science and Technology (EM-50). The authors began using large-scale demonstration projects (LSDPs) in 1996 to demonstrate and test innovative decommissioning and decontamination (D and D) technologies in ongoing US Department of Energy (DOE) decommissioning projects. These LSDPs have been conducted in and are planned for different types of DOE facilities such as research and production reactors; highly enriched uranium, tritium, and plutonium processing facilities; fuel reprocessing canyons; weapons production facilities; gaseous diffusion plants; hot cells; and waste processing facilities. The concept has been to focus on addressing DOE's high-priority deactivation and decommissioning needs through the LSDP strategy. In an LSDP, the focus area demonstrates improved technologies side by side with the current baseline technologies in ongoing site decommissioning projects. This approach helps reduce the risk and liability for the DOE users associated with the first-time use of a technology and promotes creative solutions that expand the D and D tool box beyond standard practices and technologies along with other benefits. As of January 1998, more than 50 technologies have been demonstrated covering the areas of characterization, decontamination, dismantlement, waste disposition, stabilization, and health and safety
-
Roadmapping or development of future investments in environmental science and technology
Energy Technology Data Exchange (ETDEWEB)
Wilburn, D. (Dianne)
2002-01-01
This paper will summarize efforts in roadmapping SCFA technical targets, which could be used for selection of future projects. The timely lessons learned and insights will be valuable to other programs desiring to roadmap large amounts of workscope, but unsure how to successfully complete it, by adequately defining a strategy to develop alternatives and core technologies to ensure needed environmental technologies are available and allow delivery of viable alternatives. In early FY02, Los Alamos National Laboratory's Environmental Science and Waste Technology Program Office was working jointly with Idaho National Environmental Engineering Laboratory to define and develop science and technology mini-roadmaps. We were defining and developing these mini-roadmaps to provide direction and guidance for DOE's Environmental Management's (DOE-EM) Subsurface Contaminants Focus Area (SCFA) in their development of target technologies. DOE EM's Strategic Plan for Science and Technology provides guidance for meeting science and technology needs with a view of the desired future and the long-term strategy to attain it. Program and technology mini-roadmapping were to be used to establish priorities, set program and project direction, and identify the high-priority science and technology need areas according to this document. In the past, EM science and technology needs collection is achieved through the DOE Site Technology Coordination Groups (STCG) across the complex. A future system for needs collection has not been defined. However, there is a need for gap analyses and a technical approach for the prioritization of these needs for DOE-EM to be strategic and successful in their technology research, development, demonstration, and deployments. To define the R&D projects needed to solve particular problems and select the project with the largest potential payoff will require analysis for project selection. Mini-roadmaps could be used for setting goals and
-
A proposed office of technology development education program
Energy Technology Data Exchange (ETDEWEB)
1992-12-31
The office of Environmental Restoration and Waste Management (EM) was formed within the US Department of Energy (DOE) to clean up radioactive and hazardous wastes on US government sites associated with the production and use of nuclear weapon materials In order to insure the development and demonstration of technologies necessary for the task, EM established an office of Technology Development (OTD). Furthermore, in order to accomplish this massive effort, DOE and its contractors will need large numbers of technically trained people. Because of the demands on the same pool of such individuals by other government agencies and the private sector, it is not clear that the supply will be sufficient to meet the competing demands.
-
Morgantown Energy Technology Center, technology summary
International Nuclear Information System (INIS)
1994-06-01
This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. METC's R ampersand D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities
-
DOE EM industry programs robotics development
International Nuclear Information System (INIS)
Staubly, R.; Kothari, V.
1998-01-01
The Office of Science and Technology (OST) manages an aggressive program for RD and D, as well as testing and evaluation for the Department of Energy's (DOE's) Environmental Management (EM) organization. The goal is to develop new and improved environmental restoration and waste management technologies to clean up the inventory of the DOE weapons complex faster, safer, and cheaper than is possible with currently available technologies. Robotic systems reduce worker exposure to the absolute minimum, while providing proven, cost-effective, and, for some applications, the only acceptable technique for addressing challenging problems. Development of robotic systems for remote operations occurs in three main categories: tank waste characterization and retrieval; decontamination and dismantlement; and characterization, mapping, and inspection systems. In addition, the Federal Energy Technology Center (FETC) has some other projects which fall under the heading of supporting R and D. The central objective of all FETC robotic projects is to make robotic systems more attractive by reducing costs and health risks associated with the deployment of robotic technologies in the cleanup of the nuclear weapons complex. This will be accomplished through development of robots that are cheaper, faster, safer, and more reliable, as well as more straightforward to modify/adapt and more intuitive to operate with autonomous capabilities and intelligent controls that prevent accidents and optimize task execution
-
Mixed Waste Integrated Program emerging technology development
International Nuclear Information System (INIS)
Berry, J.B.; Hart, P.W.
1994-01-01
The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m 3 of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development's Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW
-
Robotics Technology Development Program
International Nuclear Information System (INIS)
1994-02-01
The Robotics Technology Development Program (RTDP) is a ''needs-driven'' effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE's Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination ampersand Dismantlement (D ampersand D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D ampersand D and CC ampersand AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas
-
Mixed Waste Integrated Program emerging technology development
Energy Technology Data Exchange (ETDEWEB)
Berry, J.B. [Oak Ridge National Lab., TN (United States); Hart, P.W. [USDOE, Washington, DC (United States)
1994-06-01
The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m{sup 3} of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development`s Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW.
-
International Nuclear Information System (INIS)
Bush, S.
2010-01-01
The mission of the Department of Energy's (DOE's) Office of Environmental Management (EM) is to clean up the environmental legacy of nuclear weapons research and production during the Cold War. That mission includes cleaning up nuclear waste, contaminated groundwater and soil, nuclear materials, and contaminated facilities covering two million acres of land in thirty-five states. EM's principal program goals include timely completion of tank waste treatment facilities, reduction of the life-cycle costs and acceleration of the cleanup of the Cold War legacy, and reduction of the EM footprint. The mission of the EM Technology Innovation and Development program is to transform science and innovation into practical solutions to achieve the EM mission. During fiscal year 2010 (October 2009-September 2010), EM focused upon accelerating environmental cleanup by expeditiously filling identified gaps in available knowledge and technology in the EM program areas. This report describes some of the approaches and transformational technologies in tank waste processing, groundwater and soil remediation, nuclear materials disposition, and facility deactivation and decommissioning developed during fiscal year 2010 that will enable EM to meet its most pressing program goals.
-
Energy Technology Data Exchange (ETDEWEB)
Bush, S.
2010-10-22
The mission of the Department of Energy's (DOE's) Office of Environmental Management (EM) is to clean up the environmental legacy of nuclear weapons research and production during the Cold War. That mission includes cleaning up nuclear waste, contaminated groundwater and soil, nuclear materials, and contaminated facilities covering two million acres of land in thirty-five states. EM's principal program goals include timely completion of tank waste treatment facilities, reduction of the life-cycle costs and acceleration of the cleanup of the Cold War legacy, and reduction of the EM footprint. The mission of the EM Technology Innovation and Development program is to transform science and innovation into practical solutions to achieve the EM mission. During fiscal year 2010 (October 2009-September 2010), EM focused upon accelerating environmental cleanup by expeditiously filling identified gaps in available knowledge and technology in the EM program areas. This report describes some of the approaches and transformational technologies in tank waste processing, groundwater and soil remediation, nuclear materials disposition, and facility deactivation and decommissioning developed during fiscal year 2010 that will enable EM to meet its most pressing program goals.
-
Directory of Open Access Journals (Sweden)
Martielo Ivan Gehrcke
2012-10-01
Full Text Available The formulation of a drug can interfere with its absorption into the circulatory system and may result in changes in the dose required to achieve that particular effect. The aim of this study was to determine the lethal dose 50 (LD 50 and 100 (LD100 of a nanoemulsion of propofol and the lipid emulsion in mice intraperitoneally. One hundred sixty animals weighing 36.47±4.6g, which were distributed randomly into two groups: NANO and EMU who received propofol 1% in the nanoemulsion and lipid emulsion, respectively, intraperitoneally. Began with a dose of 250mg/kg (n=10 and from this isdecreased or increased the dose until achieving 0 and 100% of deaths in each group thus formed were seven subgroups in NANO (each subgroup n = 10 at doses 200, 250, 325, 350, 400, 425 and 475 mg/kg and in EMU eight subgroups (n= 10 each subset 250, 325, 350, 400, 425, 475, 525 and 575 mg/kg. In the CONTROL group (n=10 animals received saline in the largest volume used in the other groups to rule out death by the volume injected. Analysis of LD 50 and LD 100 were obtained by linear regression. The LD 50 was 320, 95 mg / kg and 4243, 51mg / kg and the LD 100 was445.99 mg / kg and 595.31 mg / kg to groups NANO and EMU, respectively. It follows that nanoemulsion is propofol in 25% more potent compared to the lipid emulsionintraperitoneally. A formulação de um fármaco pode interferir na sua absorção para o sistema circulatório, podendo resultar em alterações da dose necessária para que se consiga determinado efeito. O objetivo deste estudo foi determinar as doses letais 50 (DL 50 e 100 (DL100 do propofol em nanoemulsão e emulsão lipídica em camundongos pela via intraperitoneal. Foram utilizados 160 animais pesando 36,47 ± 4,6g, os quais foram distribuídos aleatoriamente em dois grupos: NANO e EMU que receberam propofol à 1% em nanoemulsão e em emulsão lipídica, respectivamente, pela via intraperitoneal. Iniciou-se com a dose de 250mg/kg (n=10 e a partir
-
Technology development and transfer in environmental management
International Nuclear Information System (INIS)
Katz, J.; Karnovitz, A.; Yarbrough, M.
1994-01-01
Federal efforts to develop and employ the innovative technologies needed to clean up contaminated facilities would greatly benefit from a greater degree of interaction and integration with the energies and resources of the private sector. Yet there are numerous institutional, economic, and regulatory obstacles to the transfer and commercialization of environmental restoration and waste management technologies. These obstacles discourage private sector involvement and investment in Federal efforts to develop and use innovative technologies. A further effect is to impede market development even where private sector interest is high. Lowering these market barriers will facilitate the commercialization of innovative environmental cleanup technologies and expedite the cleanup of contaminated Federal and private facilities. This paper identifies the major barriers to transfer and commercialization of innovative technologies and suggests possible strategies to overcome them. Emphasis is placed on issues particularly relevant to the Department of Energy's Environmental Restoration and Waste Management (EM) program, but which are applicable to other Federal agencies confronting complex environmental cleanup problems
-
UNITED STATES DEPARTMENT OF ENERGY WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2007
Energy Technology Data Exchange (ETDEWEB)
Bush, S
2008-08-12
The Office of Environmental Management's (EM) Roadmap, U.S. Department of Energy--Office of Environmental Management Engineering & Technology Roadmap (Roadmap), defines the Department's intent to reduce the technical risk and uncertainty in its cleanup programs. The unique nature of many of the remaining facilities will require a strong and responsive engineering and technology program to improve worker and public safety, and reduce costs and environmental impacts while completing the cleanup program. The technical risks and uncertainties associated with cleanup program were identified through: (1) project risk assessments, (2) programmatic external technical reviews and technology readiness assessments, and (3) direct site input. In order to address these needs, the technical risks and uncertainties were compiled and divided into the program areas of: Waste Processing, Groundwater and Soil Remediation, and Deactivation and Decommissioning (D&D). Strategic initiatives were then developed within each program area to address the technical risks and uncertainties in that program area. These strategic initiatives were subsequently incorporated into the Roadmap, where they form the strategic framework of the EM Engineering & Technology Program. The EM-21 Multi-Year Program Plan (MYPP) supports the goals and objectives of the Roadmap by providing direction for technology enhancement, development, and demonstrations that will lead to a reduction of technical uncertainties in EM waste processing activities. The current MYPP summarizes the strategic initiatives and the scope of the activities within each initiative that are proposed for the next five years (FY2008-2012) to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. As a result of the importance of reducing technical risk and uncertainty in the EM Waste
-
Hanford science and technology needs statements, 2000
Energy Technology Data Exchange (ETDEWEB)
BERLIN, G.T.
1999-07-16
In the aftermath of the Cold War, the United States has begun addressing the environmental consequences of five decades of nuclear weapons production. In November 1989, DOE established the Office of Environmental Restoration and Waste Management (EM) as the central authority for cleaning up the DOE weapons complex legacy of pollution, for preventing further environmental contamination, and for instituting responsible environmental management. While performing its tasks, EM found that many aspects of its large and complex mission could not be achieved using existing science and technology or without incurring unreasonable costs, risks, or schedule impacts. Consequently, a process was developed to solicit needs from around the DOE complex and focus the science and technology resources of EM-50, the National Laboratories, private industry, and colleges and universities on those needs. This document describes those needs that the Hanford Site has identified as requiring additional science or technology to complete.
-
Hanford science and technology needs statements, 1999
Energy Technology Data Exchange (ETDEWEB)
Berlin, G.T.
1998-09-30
In the aftermath of the Cold War, the US has begun addressing the environmental consequences of five decades of nuclear weapons production. In November 1989, DOE established the Office of Environmental Restoration and Waste Management (EM) as the central authority for cleaning up the DOE weapons complex legacy of pollution, for preventing further environmental contamination, and for instituting responsible environmental management. While performing its tasks, EM found that many aspects of its large and complex decisions could not be achieved using existing science and technology or without incurring unreasonable costs, risks, or schedule impacts. Consequently, a process was developed to solicit needs from around the DOE complex and focus the science and technology resources of EM-50, the National Laboratories, private industry, and collages and universities on those needs. This document describes those needs which the Hanford Site has identified as requiring additional science or technology to complete.
-
Directory of Open Access Journals (Sweden)
Xuefeng Zhang
2012-05-01
Full Text Available Fluorescence<em> em>
-
Chemical sensors technology development planning workshop
Energy Technology Data Exchange (ETDEWEB)
Bastiaans, G.J.; Haas, W.J. Jr.; Junk, G.A. [eds.
1993-03-01
The workshop participants were asked to: (1) Assess the current capabilities of chemical sensor technologies for addressing US Department of Energy (DOE) Environmental Restoration and Waste Management (EM) needs; (2) Estimate potential near term (one to two years) and intermediate term (three to five years) capabilities for addressing those needs; and (3) Generate a ranked list of specific recommendations on what research and development (R&D) should be funded to provide the necessary capabilities. The needs were described in terms of two pervasive EM problems, the in situ determination of chlorinated volatile organic compounds (VOCs), and selected metals in various matrices at DOE sites. The R&D recommendations were to be ranked according to the estimated likelihood that the product technology will be ready for application within the time frame it is needed and the estimated return on investment. The principal conclusions and recommendations of the workshop are as follows: Chemical sensors capable of in situ determinations can significantly reduce analytical costs; Chemical sensors have been developed for certain VOCs in gases and water but none are currently capable of in situ determination of VOCs in soils; The DOE need for in situ determination of metals in soils cannot be addressed with existing chemical sensors and the prospects for their availability in three to five years are uncertain; Adaptation, if necessary, and field application of laboratory analytical instruments and those few chemical sensors that are already in field testing is the best approach for the near term; The chemical sensor technology development plan should include balanced support for near- and intermediate-term efforts.
-
2018-04-26
2018 IM & EM TECHNOLOGY SYMPOSIUM INNOVATIVE INSENSITIVE MUNITION SOLUTIONS FOR ENHANCED WARFIGHTER EFFECTIVENESS April 23 – 26, 2018 Doubletree by...IM & EM TECHNOLOGY SYMPOSIUM On behalf of the Insensitive Munitions and Energetic Materials Committee and our MSIAC partner, I would like to...welcome you to the 2018 Insensitive Munitions and Energetic Materials Technology Symposium. This international gathering of the top chemists, system
-
Directory of Open Access Journals (Sweden)
Jung-Ha Kang
2012-06-01
Full Text Available The mottled skate, <em>Raja pulchraem>, is an economically valuable fish. However, due to a severe population decline, it is listed as a vulnerable species by the International Union for Conservation of Nature. To analyze its genetic structure and diversity, microsatellite markers were developed using 454 pyrosequencing. A total of 17,033 reads containing dinucleotide microsatellite repeat units (mean, 487 base pairs were identified from 453,549 reads. Among 32 loci containing more than nine repeat units, 20 primer sets (62% produced strong PCR products, of which 14 were polymorphic. In an analysis of 60 individuals from two <em>R. pulchra em>populations, the number of alleles per locus ranged from 1–10, and the mean allelic richness was 4.7. No linkage disequilibrium was found between any pair of loci, indicating that the markers were independent. The Hardy–Weinberg equilibrium test showed significant deviation in two of the 28 single-loci after sequential Bonferroni’s correction. Using 11 primer sets, cross-species amplification was demonstrated in nine related species from four families within two classes. Among the 11 loci amplified from three other <em>Rajidae> family species; three loci were polymorphic. A monomorphic locus was amplified in all three <em>Rajidae> family species and the <em>Dasyatidae> family. Two <em>Rajidae> polymorphic loci amplified monomorphic target DNAs in four species belonging to the Carcharhiniformes class, and another was polymorphic in two Carcharhiniformes species.
-
Chemical sensors technology development planning workshop
International Nuclear Information System (INIS)
Bastiaans, G.J.; Haas, W.J. Jr.; Junk, G.A.
1993-03-01
The workshop participants were asked to: (1) Assess the current capabilities of chemical sensor technologies for addressing US Department of Energy (DOE) Environmental Restoration and Waste Management (EM) needs; (2) Estimate potential near term (one to two years) and intermediate term (three to five years) capabilities for addressing those needs; and (3) Generate a ranked list of specific recommendations on what research and development (R ampersand D) should be funded to provide the necessary capabilities. The needs were described in terms of two pervasive EM problems, the in situ determination of chlorinated volatile organic compounds (VOCs), and selected metals in various matrices at DOE sites. The R ampersand D recommendations were to be ranked according to the estimated likelihood that the product technology will be ready for application within the time frame it is needed and the estimated return on investment. The principal conclusions and recommendations of the workshop are as follows: Chemical sensors capable of in situ determinations can significantly reduce analytical costs; Chemical sensors have been developed for certain VOCs in gases and water but none are currently capable of in situ determination of VOCs in soils; The DOE need for in situ determination of metals in soils cannot be addressed with existing chemical sensors and the prospects for their availability in three to five years are uncertain; Adaptation, if necessary, and field application of laboratory analytical instruments and those few chemical sensors that are already in field testing is the best approach for the near term; The chemical sensor technology development plan should include balanced support for near- and intermediate-term efforts
-
ABC Technology Development Program
International Nuclear Information System (INIS)
1994-01-01
The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: 'Provide a weapon's grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon's grade plutonium to be disposed on in [20] years.' This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance that meets or exceeds that afforded to the public by modern commercial nuclear power plants; meet or exceed all applicable federal, state, and local regulations or standards for environmental compliance; manage the program in a cost effective manner. The ABC Technology Development Program defines the technology development activities that are required to accomplish this mission. The technology development tasks are related to the following topics: blanket system; vessel systems; reactivity control systems; heat transport system components; energy conversion systems; shutdown heat transport systems components; auxiliary systems; technology demonstrations - large scale experiments
-
Task 10 -- Technology development integration. Semi-annual report, April 1--September 30, 1997
Energy Technology Data Exchange (ETDEWEB)
Erickson, T.A.; Daly, D.J.; Jones, M.L.
1997-12-31
Task 10 activities by the Energy and Environmental Research Center (EERC) have focused on the identification and integration of new cleanup technologies for use in the US Department of Energy (DOE) Environmental Management Program to address environmental issues within the nuclear defense complex. Under Subtask 10A, activities focused on a review of technology needs compiled by the Site Technology Coordination Groups as part of an ongoing assessment of the relevance of the EM Cooperative Agreement Program activities to EM site needs. Work under this subtask was completed August 31. Work under Task 10B had as its goal assisting in the definition and development of specific models to demonstrate several approaches to be used by DOE to encourage the commercialization of environmental technologies. This activity included identification and analysis of economic and regulatory factors affecting feasibility of commercial development of two specific projects and two general models to serve as a mechanism for the transfer of federally supported or developed environmental technologies to the private sector or for rapid utilization in the federal government`s efforts to clean up the weapons complex.
-
Characterization, monitoring, and sensor technology crosscutting program: Technology summary
International Nuclear Information System (INIS)
1995-06-01
The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The technology development must also be cost effective and appropriate to EM-30/40/60 needs. Furthermore, the required technologies must be delivered and implemented when needed. Accordingly, and to ensure that available DOE and other national resources are focused an the most pressing needs, management of the technology development is concentrated on the following Focus Areas: Contaminant Plume Containment and Remediation (PFA); Landfill Stabilization (LSFA); High-Level Waste Tank Remediation (TFA); Mixed Waste Characterization, Treatment, and Disposal (MWFA); and Facility Deactivation, Decommissioning, and Material Disposition (FDDMDFA). Brief descriptions of CMST-CP projects funded in FY95 are presented
-
Characterization, monitoring, and sensor technology crosscutting program: Technology summary
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-06-01
The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The technology development must also be cost effective and appropriate to EM-30/40/60 needs. Furthermore, the required technologies must be delivered and implemented when needed. Accordingly, and to ensure that available DOE and other national resources are focused an the most pressing needs, management of the technology development is concentrated on the following Focus Areas: Contaminant Plume Containment and Remediation (PFA); Landfill Stabilization (LSFA); High-Level Waste Tank Remediation (TFA); Mixed Waste Characterization, Treatment, and Disposal (MWFA); and Facility Deactivation, Decommissioning, and Material Disposition (FDDMDFA). Brief descriptions of CMST-CP projects funded in FY95 are presented.
-
International Nuclear Information System (INIS)
1993-10-01
This mid-year review provides a summary of activities within the Office of Technology Development with individual presentations being made to DOE HQ and field management staff. The presentations are by EM-541, 542, 551, and 552 organizations
-
Technology catalogue. Second edition
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-04-01
The Department of Energy`s (DOE`s) Office of Environmental Management (EM) is responsible for remediating DOE contaminated sites and managing the DOE waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste-management programs within EM. The purpose of the Technology Catalogue is to: (a) provide performance data on OTD-developed technologies to scientists and engineers responsible for preparing Remedial Investigation/Feasibility Studies (RI/FSs) and other compliance documents for the DOE`s clean-up and waste-management programs; and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community.
-
Development of the advanced CANDU technology -Development of basic technology for HWR design-
Energy Technology Data Exchange (ETDEWEB)
Suk, Hoh Chun; Lee, Sang Yong; Suk, Soo Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
1995-07-01
It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR`s that are now being operated or constructed in Korea, it is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, by performing in-depth studies especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 90 figs, 50 tabs, 38 refs. (Author).
-
Development of the advanced CANDU technology -Development of basic technology for HWR design-
International Nuclear Information System (INIS)
Suk, Hoh Chun; Lee, Sang Yong; Suk, Soo Dong
1995-07-01
It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR's that are now being operated or constructed in Korea, it is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, by performing in-depth studies especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 90 figs, 50 tabs, 38 refs. (Author)
-
Integrated thermal and nonthermal treatment technology and subsystem cost sensitivity analysis
International Nuclear Information System (INIS)
Harvego, L.A.; Schafer, J.J.
1997-02-01
The U.S. Department of Energy's (DOE) Environmental Management Office of Science and Technology (EM-50) authorized studies on alternative systems for treating contact-handled DOE mixed low-level radioactive waste (MLLW). The on-going Integrated Thermal Treatment Systems' (ITTS) and the Integrated Nonthermal Treatment Systems' (INTS) studies satisfy this request. EM-50 further authorized supporting studies including this technology and subsystem cost sensitivity analysis. This analysis identifies areas where technology development could have the greatest impact on total life cycle system costs. These areas are determined by evaluating the sensitivity of system life cycle costs relative to changes in life cycle component or phase costs, subsystem costs, contingency allowance, facility capacity, operating life, and disposal costs. For all treatment systems, the most cost sensitive life cycle phase is the operations and maintenance phase and the most cost sensitive subsystem is the receiving and inspection/preparation subsystem. These conclusions were unchanged when the sensitivity analysis was repeated on a present value basis. Opportunity exists for technology development to reduce waste receiving and inspection/preparation costs by effectively minimizing labor costs, the major cost driver, within the maintenance and operations phase of the life cycle
-
Energy Technology Data Exchange (ETDEWEB)
Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing
2009-09-28
This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.
-
International Nuclear Information System (INIS)
McCabe, D.; Chamberlain, G.; Looney, B.; Gladden, J.
2010-01-01
The Environmental Management (EM) mission is to complete the safe cleanup of the environmental legacy brought about from five decades of nuclear weapons development and government-sponsored nuclear energy research. The EM program has embraced a mission completion philosophy based on reducing risk and environmental liability over a 40-50 year lifecycle. The Department has made great progress toward safely disposing of its legacy nuclear waste. EM Research and Development (R and D) program management strategies have driven numerous technology and engineering innovations to reduce risk, minimize cleanup costs, and reduce schedules. Engineering and technology investments have provided the engineering foundation, technical assistance, approaches, and technologies that have contributed to moving the cleanup effort forward. These successes include start-up and operation of several waste treatment facilities and processes at the sites.
-
Energy Technology Data Exchange (ETDEWEB)
Taylor, L.H. [Dept. of Energy, Washington, DC (United States)
1996-12-31
In its beginning, the U.S. Department of Energy (DOE) Office of Environmental Management (EM) viewed private industry as lacking adequate technology know-how to meet demands of hazardous and radioactive waste problems at the DOE`s laboratories and nuclear weapons production facilities. In November 1989, EM`s Office of Technology Development (recently renamed the Office of Science and Technology) embarked on a bold program of developing and demonstrating {open_quotes}innovative{close_quotes} waste cleanup technologies that would be safer, faster, more effective, and less expensive than the {open_quotes}baseline{close_quotes} commercial methods. This program has engaged DOE sites, national laboratories, and universities to produce preferred solutions to the problems of handling and treating DOE wastes. More recently, much of this work has shifted to joint efforts with private industry partners to accelerate the use of newly developed technologies and to enhance existing commercial methods. To date, the total funding allocation to the Office of Science and Technology program has been about $2.8 billion. If the technology applications` projects of the EM Offices of Environmental Restoration and Waste Management are included, the total funding is closer to $4 billion. Yet, the environmental industry generally has not been very receptive to EM`s innovative technology offerings. And, essentially the same can be said for DOE sites. According to the U.S. General Accounting Office in an August 1994 report, {open_quotes}Although DOE has spent a substantial amount to develop waste cleanup technologies, little new technology finds its way into the agency`s cleanup actions{close_quotes}. The DOE Baseline Environmental Management Report estimated cleanups of DOE`s Cold War legacy of wastes to require the considerable cost of $226 billion over a period of 75 years. 1 tab.
-
Directory of Open Access Journals (Sweden)
Wei Lu
2012-06-01
Full Text Available Single nucleotide polymorphisms (SNPs are currently the marker of choice in a variety of genetic studies. Using the high resolution melting (HRM genotyping approach, 101 gene-based SNP markers were developed for <em>Apostichopus japonicusem>, a sea cucumber species with economic significance for the aquaculture industry in East Asian countries. HRM analysis revealed that all the loci showed polymorphisms when evaluated using 40 <em>A. japonicusem> individuals collected from a natural population. The minor allele frequency ranged from 0.035 to 0.489. The observed and expected heterozygosities ranged from 0.050 to 0.833 and 0.073 to 0.907, respectively. Thirteen loci were found to depart significantly from Hardy–Weinberg equilibrium (HWE after Bonferroni corrections. Significant linkage disequilibrium (LD was detected in one pair of markers. These SNP markers are expected to be useful for future quantitative trait loci (QTL analysis, and to facilitate marker-assisted selection (MAS in <em>A. japonicusem>.
-
Development of liquid metal type TBM technology for ITER
International Nuclear Information System (INIS)
Hong, Bong Guen; Kwak, J. G.; Kim, Y.
2008-03-01
The objectives of the ITER project for the construction and operation are to perform the test related to the neutronics, blanket module, tritium treatment technology, advanced plasma technology, and to test the heat extraction and tritium breeding in the test blanket for the fusion reactor. Other parties have been developing the Test Blanket Module (TBM) for testing in the ITER for these purposes. Through this project, we can secure the TBM design and related technology, which will be used as the core technology for the DEMO construction, our own fusion reactor development. In 1st year, the optimized design procedure was established with the existing tools, which have been used in nuclear reactor design, and the optimized HCML TBM design was obtained through iteration method according to the developed design procedure. He cooling system as a TBM auxiliary system was designed considering the final design of the KO HCML TBM such as coolant capacity and operation pressure. Layout for this system was prepared to be installed in the ITER TCWS vault. MHD effect of liquid Li breeder by magnetic flux in ITER such as much higher pressure drop was evaluated with CFD-ACE and it was concluded that the Li breeder should have a slow velocity to reduce this effect. Most results were arranged in the form of DDD including preliminary safety analysis report. In 2nd year, the optimized design procedure was complemented and updated. In performance analysis on thermal-hydraulic and thermo-mechanical one, full 3D meshes were generated and used in this analysis in order to obtain the more exact temperature, deformation, and stress solution. For liquid Li breeder system, design parameters were induced before the detailed design of the system and were used in the design of the liquid Li test loop. LOCA analysis, activation analysis in LOCA, EM analysis were performed as a preliminary safety analysis. In order to develop the manufacturing technology, Be+FMS and FMS to FMS joining conditions
-
Development of liquid metal type TBM technology for ITER
Energy Technology Data Exchange (ETDEWEB)
Hong, Bong Guen; Kwak, J. G.; Kim, Y. (and others)
2008-03-15
The objectives of the ITER project for the construction and operation are to perform the test related to the neutronics, blanket module, tritium treatment technology, advanced plasma technology, and to test the heat extraction and tritium breeding in the test blanket for the fusion reactor. Other parties have been developing the Test Blanket Module (TBM) for testing in the ITER for these purposes. Through this project, we can secure the TBM design and related technology, which will be used as the core technology for the DEMO construction, our own fusion reactor development. In 1st year, the optimized design procedure was established with the existing tools, which have been used in nuclear reactor design, and the optimized HCML TBM design was obtained through iteration method according to the developed design procedure. He cooling system as a TBM auxiliary system was designed considering the final design of the KO HCML TBM such as coolant capacity and operation pressure. Layout for this system was prepared to be installed in the ITER TCWS vault. MHD effect of liquid Li breeder by magnetic flux in ITER such as much higher pressure drop was evaluated with CFD-ACE and it was concluded that the Li breeder should have a slow velocity to reduce this effect. Most results were arranged in the form of DDD including preliminary safety analysis report. In 2nd year, the optimized design procedure was complemented and updated. In performance analysis on thermal-hydraulic and thermo-mechanical one, full 3D meshes were generated and used in this analysis in order to obtain the more exact temperature, deformation, and stress solution. For liquid Li breeder system, design parameters were induced before the detailed design of the system and were used in the design of the liquid Li test loop. LOCA analysis, activation analysis in LOCA, EM analysis were performed as a preliminary safety analysis. In order to develop the manufacturing technology, Be+FMS and FMS to FMS joining conditions
-
EM International, July 1994, Volume 2
International Nuclear Information System (INIS)
1994-01-01
The Office of Environmental Management (EM) at the Department of Energy (DOE) is seeking out and leveraging foreign technology, data, and resources in keeping with EM's mandate to protect public health and the environment through the safe and cost-effective remediation of the Department's nuclear weapons sites. EM works closely with foreign governments, industry, and universities to obtain innovative environmental technologies, scientific and engineering expertise, and operations experience that will support EM's objectives. Where appropriate, these international resources are used to manage the more urgent risks at our sites, secure a safe workplace, help build consensus on critical issues, and strengthen our technology development program. Through international agreements EM engages in cooperative exchange of information, technology, and individuals. Currently, we are managing agreements with a dozen countries in Europe, Latin America, and Asia. These agreements focus on environmental restoration, waste management, transportation of radioactive wastes, and decontamination and decommissioning. This publication contains the following articles: in situ remediation integrated program; in-situ characterization and inspection of tanks; multimedia environmental pollutant assessment system (MEPAS); LLNL wet oxidation -- AEA technology. Besides these articles, this publication covers: EU activities with Russia; technology transfer activities; and international organization activities
-
Directory of Open Access Journals (Sweden)
Mohammad Anis
2012-05-01
Full Text Available An efficient method was developed for plant regeneration and establishment from alginate encapsulated synthetic seeds of <em>Rauvolfia serpentinaem>. Synthetic seeds were produced using <em>in vitroem> proliferated microshoots upon complexation of 3% sodium alginate prepared in Llyod and McCown woody plant medium (WPM and 100 mM calcium chloride. Re-growth ability of encapsulated nodal segments was evaluated after storage at 4 °C for 0, 1, 2, 4, 6 and 8 weeks and compared with non-encapsulated buds. Effects of different media <em>viz>; Murashige and Skoog medium; Lloyd and McCown woody Plant medium, Gamborg’s B5 medium and Schenk and Hildebrandt medium was also investigated for conversion into plantlets. The maximum frequency of conversion into plantlets from encapsulated nodal segments stored at 4 °C for 4 weeks was achieved on woody plant medium supplement with 5.0 μM BA and 1.0 μM NAA. Rooting in plantlets was achieved in half-strength Murashige and Skoog liquid medium containing 0.5 μM indole-3-acetic acid (IAA on filter paper bridges. Plantlets obtained from stored synseeds were hardened, established successfully <em>ex vitroem> and were morphologically similar to each other as well as their mother plant. The genetic fidelity of <em>Rauvolfia em>clones raised from synthetic seeds following four weeks of storage at 4 °C were assessed by using random amplified polymorphic<em> em>DNA (RAPD and inter-simple sequence repeat<em> em>(ISSR markers. All the RAPD and ISSR profiles from generated plantlets were monomorphic and comparable<em> em>to the mother plant, which confirms the genetic<em> em>stability among the clones. This synseed protocol could be useful for establishing a particular system for conservation, short-term storage and production of genetically identical and stable plants before it is released for commercial purposes.
-
International Nuclear Information System (INIS)
1995-01-01
The Waste Management and Technologies Analytical Database System (WMTADS) supported by the Department of Energy's (DOE) Office of Environmental Management (EM), Office of Technology Development (EM-50), was developed and based at the Los Alamos National Laboratory (LANL), Los Alamos, New Mexico, to collect, identify, organize, track, update, and maintain information related to existing/available/developing and planned technologies to characterize, treat, and handle mixed, hazardous and radioactive waste for storage and disposal in support of EM strategies and goals and to focus area projects. WMTADS was developed as a centralized source of on-line information regarding technologies for environmental management processes that can be accessed by a computer, modem, phone line, and communications software through a Local Area Network (LAN), and server connectivity on the Internet, the world's largest computer network, and with file transfer protocol (FTP) can also be used to globally transfer files from the server to the user's computer through Internet and World Wide Web (WWW) using Mosaic
-
International Technology Exchange Division: 1993 Annual report
Energy Technology Data Exchange (ETDEWEB)
1993-12-31
The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES`s goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM`s policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM`s training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.
-
Directory of Open Access Journals (Sweden)
E.C. Carlo
2009-08-01
Full Text Available Avaliaram-se a biocompatibilidade, a osseointegração, a osseocondução e a biodegradação de compósitos de 50% hidroxiapatita (HAP-91® e 50% poli-hidroxibutirato. O compósito foi implantado em defeitos ósseos em 12 coelhos (grupo experimental, sendo comparado a defeitos não preenchidos (grupo-controle, de igual número. Os parâmetros clínicos dor, claudicação, infecção, deiscência e edema foram avaliados nos primeiros oito dias após a cirurgia e aos 45 e 90 dias. Radiografias foram realizadas aos oito, 45 e 90 dias após a cirurgia em quatro animais por grupo que, em seguida, foram submetidos à eutanásia para coleta de amostras destinadas a análises histológica e histomorfométrica. Não ocorreram diferenças entre os grupos para todos os parâmetros clínicos. Radiografias demonstraram um compósito com radiopacidade semelhante à do osso vizinho e contato direto entre osso e compósito aos 45 e 90 dias. Diferença significativa foi observada entre a porcentagem dos tecidos ósseo e conjuntivo dentro do defeito nos dias oito, 45 e 90, assim como na interface aos 45 e 90 dias. Foram observadas projeções dos tecidos ósseo e conjuntivo no interior do compósito e sinais de biodegradação na ausência de infiltrado inflamatório. Pode-se concluir que o compósito é biocompatível, osseocondutor, biodegradável e se integra ao tecido ósseo.The biocompatibility, osseointegration, osseoconductivity, and biodegradation of a 50-50% hydroxyapatite (HAP-91®-polyhydroxybutyrate were evaluated. The composite was implanted in bone defects of 12 rabbits (experimental group, being compared to unfilled defects (control group, 12 animals. The clinical parameters of pain, lameness, infection, dehiscence, and edema were evaluated during the first eight days and on the 45th and 90th days after surgery. Radiographs were taken in four animals per group at 8, 45, and 90 days after surgery, when animals were euthanized to collect samples for
-
Technology catalogue. Second edition
International Nuclear Information System (INIS)
1995-04-01
The Department of Energy's (DOE's) Office of Environmental Management (EM) is responsible for remediating DOE contaminated sites and managing the DOE waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste-management programs within EM. The purpose of the Technology Catalogue is to: (a) provide performance data on OTD-developed technologies to scientists and engineers responsible for preparing Remedial Investigation/Feasibility Studies (RI/FSs) and other compliance documents for the DOE's clean-up and waste-management programs; and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community
-
The outline of the research and development EM-ACROSS in Tono area
International Nuclear Information System (INIS)
Nakajima, Takahiro; Kunitomo, Takahiro; Kumazawa, Mineo; Nagao, Hiromichi
2010-07-01
ACROSS (Accurately Controlled Routinely Operated Signal System) has developed to acquire the detailed information on the tectonically active zone. The technology for example the transmission and receiving technique, the data analysis and the interpretation technique of the ACROSS signal is able to apply not only to seismology but also to other field. We considered the ACROSS technology may apply to the engineering technology of the Mizunami Underground Research Laboratory (MIU) project, for example monitoring of the change of the geological environment around shafts and also the strength of the shaft concrete itself. It is planned that the examination for three years will be made from fiscal year 2007, and the new observation site around the MIU was established, and the data acquisition and data analysis have been carried out. This report compiled technical matters among the results obtained in the research and the development of the EM-ACROSS. (author)
-
Innovation investment area: Technology summary
Energy Technology Data Exchange (ETDEWEB)
1994-03-01
The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.
-
Innovation investment area: Technology summary
International Nuclear Information System (INIS)
1994-03-01
The mission of Environmental Management's (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area's (IIA) two program elements: RDDT ampersand E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation
-
Technology Catalogue. First edition
Energy Technology Data Exchange (ETDEWEB)
1994-02-01
The Department of Energy`s Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM`s Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department`s clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD`s applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina).
-
Development of 50 MVA superconducting generator
International Nuclear Information System (INIS)
Ueda, Kiyotaka; Maki, Naoki; Takahashi, Noriyoshi; Ogata, Hisanao; Sanematsu, Toshihiro.
1984-01-01
Superconducting synchronous generators are expected to be the large capacity turbogenerators of next generation, but they have the structural features considerably different from conventional generators, such as low temperature multiple cylinder rotors and air gap armature winding. For the purpose of grasping the performance of superconducting generators and establishing the fundamental technology for their practical use, Hitachi Ltd. manufactured a 50 MVA superconducting generator. As the results of test, the precooling operation was smoothly finished for about 40 hours, and the superconducting rotor rotated stably at 3000 rpm. The steady and transient electrical characteristics were able to be grasped. It is intended to reflect these results to the development of a practical generator of 500 MVA class expected as the next step. When the superconducting exciting winding cooled by liquid helium is used, the reduction of weight, the improvement of efficiency and the improvement of the stability of power system can be expected. The structural features and the function of superconducting generators, the present state of the development in the world, the outline of the 50 MVA generator, the test results and the problems and the prospect hereafter are reported. The superconducting winding was made of NbTiZr alloy multicore wires. (Kako, I.)
-
International Nuclear Information System (INIS)
Doi, Kunio
2006-01-01
Over the last 50 years, diagnostic imaging has grown from a state of infancy to a high level of maturity. Many new imaging modalities have been developed. However, modern medical imaging includes not only image production but also image processing, computer-aided diagnosis (CAD), image recording and storage, and image transmission, most of which are included in a picture archiving and communication system (PACS). The content of this paper includes a short review of research and development in medical imaging science and technology, which covers (a) diagnostic imaging in the 1950s, (b) the importance of image quality and diagnostic performance, (c) MTF, Wiener spectrum, NEQ and DQE, (d) ROC analysis, (e) analogue imaging systems, (f) digital imaging systems, (g) image processing, (h) computer-aided diagnosis, (i) PACS, (j) 3D imaging and (k) future directions. Although some of the modalities are already very sophisticated, further improvements will be made in image quality for MRI, ultrasound and molecular imaging. The infrastructure of PACS is likely to be improved further in terms of its reliability, speed and capacity. However, CAD is currently still in its infancy, and is likely to be a subject of research for a long time. (review)
-
Project Management Plan for the INEL technology logic diagrams
International Nuclear Information System (INIS)
Rudin, M.J.
1992-10-01
This Project Management Plan (PjMP) describes the elements of project planning and control that apply to activities outlined in Technical Task Plan (TTP) ID-121117, ''Technology Logic Diagrams For The INEL.'' The work on this project will be conducted by personnel in EG ampersand G Idaho, Inc.'s Waste Technology Development Program. Technology logic diagrams represent a formal methodology to identify technology gaps or needs within Environmental Restoration/Waste Management Operations, which will focus on Office of Environmental Restoration and Waste Management (EM-50) research and development, demonstration, test, and evaluation efforts throughout the US Department of Energy complex. This PjMP describes the objectives, organization, roles and responsibilities, workscope and processes for implementing and managing the technology logic diagram for the Idaho National Engineering Laboratory project
-
International Nuclear Information System (INIS)
Cummings, M.A.
1999-01-01
The purpose of this paper is to provide a response to the general question as to why there has been so little actual application of new environmental technologies to on-the-ground cleanup. There are two sides to the issue that may at first seem unrelated, but taken together provide both a tactical and theoretical response to the question. EM-50 has provided a tactical response to the challenge of showing that expenditures in technology development are justified by implementation of its ASTD program. ASTD provides a fiscal incentive for the major DOE facilities to effect remedial actions using new technologies. The purpose of the ASTD is to demonstrate to stakeholders, including US Congress and concerned citizens, that environmental costs can be reduced and site cleanup accelerated by substituting new technologies for established baseline methods. The theoretical side looks at how historically, the substitution of new technologies for old in any given industry follows well-documented principles of diffusion; therefore, the aggregate adoption of new environmental technologies is predictive. It is not within the scope of this paper to accurately quantify the equations that result in the mathematical description of the S-shaped diffusion curve, but the overall concept of the innovation-development process is an important clue in understanding why new EM-50 technologies are not already in more widespread use
-
Energy Technology Data Exchange (ETDEWEB)
1993-12-31
The US Department of Energy (DOE) Office of Environmental Restoration and Waste Management (EM) is charged with overseeing a multi-billion dollar environmental cleanup effort. EM leads an aggressive national research, development, demonstration, testing, and evaluation program to provide environmental restoration and waste management technologies to DOE sites, and to manage DOE-generated waste. DOE is firmly committed to working with industry to effectuate this cleanup effort. We recognize that private industry, university, and other research and development programs are valuable sources of technology innovation. The primary purpose of this document is to provide you with information on potential business opportunities in the following technical program areas: Remediation of High-Level Waste Tanks; Characterization, Treatment, and Disposal of Mixed Waste; Migration of Contaminants; Containment of Existing Landfills; Decommissioning and Final Disposition, and Robotics.
-
The Western Environmental Technology Office (WETO), Butte, Montana, technology summary
International Nuclear Information System (INIS)
1994-09-01
This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. WETO's environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies
-
Directory of Open Access Journals (Sweden)
Oleksii S. Voronkin
2014-02-01
Full Text Available The article presents results of a synthesis study of the evolution of computer technologies to support students studying at the universities of Ukraine since the second half of 50th to the early of 90th of the twentieth century. Research was conducted on the basis of a wide range of sources and materials. There are four historical stages highlighted: 1 the emergence of algorithms of programmed learning; 2 the emergence of automated technologies to support studying; 3 the birth of the first computer training systems and the development of learning environment; 4 an integrated development of computer technology, the development of intelligent tutoring systems and virtual reality systems.
-
International Technology Exchange Division: 1993 Annual report
International Nuclear Information System (INIS)
1993-01-01
The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES's goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM's policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM's training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database
-
The Western Environmental Technology Office (WETO), Butte, Montana, technology summary
Energy Technology Data Exchange (ETDEWEB)
1994-09-01
This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. WETO`s environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies.
-
International Nuclear Information System (INIS)
1994-02-01
The Department of Energy's Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM's Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department's clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD's applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina)
-
Directory of Open Access Journals (Sweden)
Antonio Eduardo Zerati
2005-10-01
Full Text Available OBJECTIVE: To study the immediate and late results obtained from the implantation of vena cava filters in cancer patients with deep vein thrombosis concomitant with neoplasia. METHODS: This was a retrospective evaluation of 50 patients with an association of cancer and deep venous thrombosis who underwent interruption of the inferior vena cava and the insertion of permanent vena cava filters. The indications for the procedure, filter implantation technique, early and late complications related to the operation, and the clinical evolution were evaluated. RESULTS: The most frequent indication for filter implantation was the contraindication for full anticoagulant treatment (80%. The femoral vein was the preferred access route (86% of the patients. There were no complications related to the surgical procedure. During the follow-up, the following complications were observed: 1 episode of nonfatal pulmonary thromboembolism, 2 cases of occlusion of the inferior vena cava, and 1 case of thrombus retained in the device. Twenty patients (40% died due to progression of the neoplasm. CONCLUSIONS: Interruption of the inferior cava vein using an endoluminal filter is a procedure with a low rate of complications. It is a safe and efficient measure for preventing pulmonary embolism in cancer patients who have deep vein thrombosis of the lower limbs.OBJETIVO: Estudar os resultados imediatos e tardios obtidos com a implantação de filtros de veia cava inferior em pacientes com trombose venosa profunda concomitante a neoplasia. MÉTODOS: Avaliamos retrospectivamente 50 pacientes com câncer e trombose venosa profunda associada submetidos a interrupção de veia cava inferior com filtros intraluminais definitivos. Foram estudados aspectos referentes à indicação do procedimento, à técnica de implante dos dispositivos, complicações precoces e tardias relacionadas à operação e à evolução dos pacientes. RESULTADOS: A indicação mais freqüente para o
-
Directory of Open Access Journals (Sweden)
Hye Suck An
2012-08-01
Full Text Available <em>Mytilus coruscusem> (family Mytilidae is one of the most important marine shellfish species in Korea. During the past few decades, this species has become endangered due to the loss of habitats and overfishing. Despite this species’ importance, information on its genetic background is scarce. In this study, we developed microsatellite markers for <em>M.
-
Directory of Open Access Journals (Sweden)
Gen-Chun Wang
2012-07-01
Full Text Available Through bioassay-guided fractionation of the extracts from the aerial parts of the Chinese herb <em>Hypericum japonicumem> Thunb. Murray, Isojacareubin (ISJ was characterized as a potent antibacterial compound against the clinical methicillin-resistant S<em>taphylococcus aureusem> (MRSA. The broth microdilution assay was used to determine the minimal inhibitory concentrations (MICs and minimal bactericidal concentrations (MBCs of ISJ alone. The results showed that its MICs/MBCs ranged from 4/16 to 16/64 μg/mL, with the concentrations required to inhibit or kill 50% of the strains (MIC50/MBC50 at 8/16 μg/mL. Synergistic evaluations of this compound with four conventional antibacterial agents representing different types were performed by the chequerboard and time-kill tests. The chequerboard method showed significant synergy effects when ISJ was combined with Ceftazidime (CAZ, Levofloxacin (LEV and Ampicillin (AMP, with the values of 50% of the fractional inhibitory concentration indices (FICI50 at 0.25, 0.37 and 0.37, respectively. Combined bactericidal activities were also observed in the time-kill dynamic assay. The results showed the ability of ISJ to reduce MRSA viable counts by log10CFU/mL at 24 h of incubation at a concentration of 1 × MIC were 1.5 (LEV, additivity, 0.92 (CAZ, indifference and 0.82 (AMP, indifference, respectively. These <em>in vitroem> anti-MRSA activities of ISJ alone and its synergy with conventional antibacterial agents demonstrated that ISJ enhanced their efficacy, which is of potential use for single and combinatory therapy of patients infected with MRSA.
-
Developing new technology of coal coking
Energy Technology Data Exchange (ETDEWEB)
Erkin, L.I.; Nefedov, P.Ya.
1981-03-01
This paper characterizes types of coke (grain size, compression strength, abrasion, porosity) used by: blast furnaces, shaft furnaces, ferroalloys and phosphorus production, and ore agglomeration. Development of formed metallurgical coke production on the basis of technologies worked out by the Eastern Research Scientific Institute for Coal Chemistry is analyzed. The following phases in the investigations are stressed: optimization of coal blends (increasing proportion of coals with poor caking properties, pressing briquets, carbonization, temperature distribution and temperature control, using heat emitted by hot coke for coal preheating (heat consumption of coking is reduced to 200 kcal/kg). On the basis of technology developed and tested by VUKhIN formed coke consisting of 60% G6 coal and 40% 2SS coal has been produced. Using the coke in blast furnaces increases furnace capacity by 5% and reduces coke consumption in a furnace by 2.6%. It is suggested that wide use of the proposed technology of formed metallurgical coke production in the Kuzbass (using coals with poor caking properties from surface mines) would increase coke production of the region to 50 Mt for a year. technology of producing formed foundry coke from: 80 to 86% anthracites, semianthracites and coals with poor caking properties, 5 to 10% coking coal, and 8% binder is evaluated. Formed foundry coke produced from the blend reduces coke consumption in a foundry by 25 to 30% and increases cast iron temperature by 20 to 50/sup 0/C. Technologies of producing coke for phosphorus industry by continuous coking of coals difficult to coke in vertical coke ovens and production of coke for ore agglomeration are also discussed. (In Russian)
-
International Nuclear Information System (INIS)
Roach, J.A.
1995-11-01
The Assistant Secretary for the Office of Environmental Management (EM) at the US DOE initiated a new approach in August, 1993 to environmental research and technology development. The key features of this new approach included establishment of five focus areas and three crosscutting technology programs, which overlap the boundaries of the focus areas. The five focus areas include the Contaminant Plumes Containment and Remediation; Mixed Waste Characterization, Treatment, and Disposal; High-Level Waste Tank Remediation, Landfill Stabilization, and Decontamination and Decommissioning Focus Areas. The three crosscutting technologies programs include Characterization, Monitoring, and Sensor Technology; Efficient Separations and Processing; and Robotics. The DOE created the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop and facilitate implementation of technologies required to meet its commitments for treatment of mixed wastes. To accomplish this goal, the technology deficiencies must be identified and categorized, the deficiencies and needs must be prioritized, and a technical baseline must be established that integrates the requirements associated with these needs into the planned and ongoing environmental research and technology development activities supported by the MWFA. These steps are described
-
Energy Technology Data Exchange (ETDEWEB)
Hayes, W F
1990-01-01
This report presents an update of the Phase II assessment of development status and performance capabilities for four candidate super-speed ground transportation system alternatives for the Las Vegas-Southern California corridor. The four alternatives considered are the TGV wheel-on-rail technology, the Transrapid TR- 07 long-stator Electromagnetic Maglev (EMS) technology, the Japan Railways MLU Electrodynamic Maglev (EDS) technology, and the HSST Corp. HSST-400 short-stator Electromagnetic Maglev technology.
-
Directory of Open Access Journals (Sweden)
Hillegonda Maria D Novaes
2000-10-01
Full Text Available A área de avaliação de programas, serviços e tecnologias em geral e na saúde, em particular, passa por um processo de expansão e diversificação conceitual e metodológica, bem como por uma crescente demanda para se constituir em instrumento de apoio às decisões necessárias à dinâmica dos sistemas e serviços de saúde, na implementação das políticas de saúde. Apoiando-se em uma revisão da literatura internacional especializada, e tomando por referência a década de 90, foram identificados os critérios nucleares que organizam os processos de avaliação, articulando-os com os recortes adotados pelas principais tipologias de avaliação, atualmente institucionalizadas nos países desenvolvidos, avaliação de programas, avaliação e garantia de qualidade em serviços e avaliação de tecnologias. A participação brasileira no desenvolvimento metodológico da área também é analisada.The field of program, services and technology evaluation in general, and in health care in particular, is going through an important growth and conceptual and methodological diversification. It is also the object of an increasing demand for its participation as an effective supportive instrument in the decision-making process, and a constant need in the dynamics of health systems and services. In this paper, based on literature review, nuclear criteria involved in the organization of all evaluation processes are identified, and articulated with the existing institutionalized evaluation practices in developed countries, that is, program evaluation, quality assessment and management and technology assessment. In conclusion, the incipient development of a methodological evaluation output in Brazil is analyzed.
-
Effects of passing electric current on the elastic property of amorphous Cu50Zr50 and Cu50Ti50
International Nuclear Information System (INIS)
Takemoto, R.; Nagata, M.; Mizubayashi, H.
1996-01-01
For both amorphous Cu 50 Zr 50 and Cu 50 Ti 50 , the dynamic Young's modulus M was found to increase under passing electric d.c.-current (PEC) with the current density i d below 5 x 10 3 A/cm 2 , suggesting that PEC induces internal stress. The i d dependence of M observed at low strain amplitude ε t was found to be identical to the ε t dependence of M without PEC after scaling between i d and ε t , giving Z* in the order of 10 5 , where Z* is the apparent charge number measuring the electromigration force (EM-force) under PEC. The authors surmise that such a large Z* reflects the concentration of EM-force through the collective motion of many atoms, Z* = z*ξ, for ξ atoms with the charge number z* per atom. Application of this view to the observed effect of annealing on Z* gives ξ as several hundreds in the as-quenched state. Based on the present results, the effects of PEC on the structural relaxation and crystallization processes reported are also discussed
-
International Nuclear Information System (INIS)
Bush, S.
2009-01-01
The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5
-
Energy Technology Data Exchange (ETDEWEB)
Varnado, S.G. (ed.)
1980-04-01
The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.
-
Energy Technology Data Exchange (ETDEWEB)
1993-07-01
It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.
-
International Nuclear Information System (INIS)
Jones, J.A.
1995-04-01
This report presents the results of a study performed to identify the most promising vitrification melter technologies that the Department of Energy (EM-50) might pursue with available funding. The primary focus was on plasma arc systems and graphite arc melters. The study was also intended to assist EM-50 in evaluating competing technologies, formulating effective technology strategy, developing focused technology development projects, and directing the work of contractors involved in vitrification melter development
-
Technology transfer in the Clean Development Mechanism
International Nuclear Information System (INIS)
De Coninck, H.C.; Haake, F.; Van der Linden, N.H.
2007-01-01
Technology transfer is often mentioned as an ancillary benefit of the Kyoto Protocol's Clean Development Mechanism (CDM), but this claim has never been researched or substantiated. The question of technology transfer is important from two perspectives: for host countries, whether the CDM provides a corridor for foreign, climate-friendly technologies and investment, and for industrialised countries as it provides export potential for climate-friendly technologies developed as a consequence of stringent greenhouse gas targets. In order to better understand whether technology transfer from the EU and elsewhere is occurring through the CDM, and what is the value of the associated foreign investment, this paper examines technology transfer in the 63 CDM projects that were registered on January 1st, 2006. Technology originates from outside the host country in almost 50% of the evaluated projects. In the projects in which the technology originates from outside the host country, 80% use technology from the European Union. Technologies used in non-CO2 greenhouse gas and wind energy projects, and a substantial share of the hydropower projects, use technology from outside the host country, but biogas, agricultural and biomass projects mainly use local technology. The associated investment value with the CDM projects that transferred technology is estimated to be around 470 million Euros, with about 390 coming from the EU. As the non-CO2 greenhouse gas projects had very low capital costs, the investment value was mostly in the more capital-intensive wind energy and hydropower projects
-
Guo, Shesen; Zhang, Ganzhou; Guo, Yufei
2016-01-01
The definition of the field of educational technology has evolved over 50 years. New inventions and economic globalization increasingly facilitate people's communication for exchange of ideas and collaboration. This work attempts to describe international research collaboration in educational technology for the past 50 years. This article intends…
-
Wegrzecka, Iwona; Panas, Andrzej; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kozłowski, Roman; Sarnecki, Jerzy; Słysz, Wojciech; Szmigiel, Dariusz; Wegrzecki, Maciej; Zaborowski, Michał
2013-07-01
The paper discusses the technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE). The developed technology enables the fabrication of both planar and epiplanar p+-ν-n+ detector structures with an active area of up to 50 cm2. The starting material for epiplanar structures are silicon wafers with a high-resistivity n-type epitaxial layer ( ν layer - ρ < 3 kΩcm) deposited on a highly doped n+-type substrate (ρ< 0,02Ωcm) developed and fabricated at the Institute of Electronic Materials Technology. Active layer thickness of the epiplanar detectors (νlayer) may range from 10 μm to 150 μm. Imported silicon with min. 5 kΩcm resistivity is used to fabricate planar detectors. Active layer thickness of the planar detectors (ν) layer) may range from 200 μm to 1 mm. This technology enables the fabrication of both discrete and multi-junction detectors (monolithic detector arrays), such as single-sided strip detectors (epiplanar and planar) and double-sided strip detectors (planar). Examples of process diagrams for fabrication of the epiplanar and planar detectors are presented in the paper, and selected technological processes are discussed.
-
Development of nuclear analytical technology
International Nuclear Information System (INIS)
Jee, Kwang Yong; Kim, W. H.; Park, Yeong J.; Park, Yong J.; Sohn, S. C.; Song, B. C.; Jeon, Y. S.; Pyo, H. Y.; Ha, Y. K.
2004-04-01
The objectives of this study are to develop the technology for the determination of isotopic ratios of nuclear particles detected from swipe samples and to develop the NIPS system. The R and D contents and results of this study are firstly the production of nuclear micro particle(1 ∼ 20 μm) and standardization, the examination of variation in fission track characteristic according to nuclear particle size and enrichment( 235 U: 1-50%), the construction of database and the application of this technique to swipe samples. If this technique is verified its superiority by various field tests and inter-laboratory comparison program with other institutes in developed countries, it can be possible to join NWAL supervised under IAEA and to export our technology abroad. Secondly, characteristics of alpha track by boron (n, α) nuclear reaction were studied to measure both total boron concentration and 10B enrichment. The correlation of number of alpha tracks and various 10B concentration was studied to evaluate the reliability of this method. Especially, cadmium shielding technique was introduced to reduce the background of alpha tracks by covering the solid track detector and the multi-dot detector plate was developed to increase the reproducibility of measurement by making boron solution dried evenly in the plate. The results of the alpha track method were found to be well agreed with those of mass spectroscopy within less than 10 % deviation. Finally, the NIPS system using 252 Cf neutron source was developed and prompt gamma spectrum and its background were obtained. Monte Carlo method using MCNP-4B code was utilized for the interpretation of neutron and gamma-ray shielding condition as well as the moderation of a fast neutron. Gamma-gamma coincidence was introduced to reduce the prompt gamma background. The counting efficiency of the HPGe detector was calibrated in the energy range from 50 keV to 10 MeV using radio isotope standards and prompt gamma rays of Cl for the
-
International Nuclear Information System (INIS)
Wellman, Dawn M.; Triplett, Mark B.; Freshley, Mark D.; Truex, Michael J.; Gephart, Roy E.; Johnson, Timothy C.; Chronister, Glen B.; Gerdes, Kurt D.; Chamberlain, Skip; Marble, Justin; Ramirez, Rosa
2011-01-01
DOE-EM, Office of Groundwater and Soil Remediation and DOE Richland, in collaboration with the Hanford site and Pacific Northwest National Laboratory, have established the Deep Vadose Zone Applied Field Research Center (DVZ-AFRC). The DVZ-AFRC leverages DOE investments in basic science from the Office of Science, applied research from DOE EM Office of Technology Innovation and Development, and site operation (e.g., site contractors [CH2M HILL Plateau Remediation Contractor and Washington River Protection Solutions], DOE-EM RL and ORP) in a collaborative effort to address the complex region of the deep vadose zone. Although the aim, goal, motivation, and contractual obligation of each organization is different, the integration of these activities into the framework of the DVZ-AFRC brings the resources and creativity of many to provide sites with viable alternative remedial strategies to current baseline approaches for persistent contaminants and deep vadose zone contamination. This cooperative strategy removes stove pipes, prevents duplication of efforts, maximizes resources, and facilitates development of the scientific foundation needed to make sound and defensible remedial decisions that will successfully meet the target cleanup goals for one of DOE EM's most intractable problems, in a manner that is acceptable by regulators.
-
Directory of Open Access Journals (Sweden)
Nawal M. Al-Musayeib
2012-09-01
Full Text Available The present study investigated the <em>in vitroem> antiprotozoal activity of sixteen selected medicinal plants. Plant materials were extracted with methanol and screened <em>in vitroem> against erythrocytic schizonts of <em>Plasmodium falciparumem>, intracellular amastigotes of <em>Leishmania infantum em>and <em>Trypanosoma cruzi em>and free trypomastigotes of<em> T. bruceiem>. Cytotoxic activity was determined against MRC-5 cells to assess selectivity<em>. em>The criterion for activity was an IC50 < 10 µg/mL (4. Antiplasmodial activity was found in the<em> em>extracts of<em> em>
-
Energy Technology Data Exchange (ETDEWEB)
Varnado, S.G. (ed.)
1980-11-01
The progress, status, and results of ongoing research and development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.
-
Directory of Open Access Journals (Sweden)
Li-Ling Chang
2012-05-01
Full Text Available The purpose of the study was to investigate the antioxidant characteristics of <em>Anisomeles indicaem> methanol extract and the inhibitory effect of ovatodiolide on melanogenesis. In the study, the antioxidant capacities of <em>A. indicaem> methanol extract such as DPPH assay, ABTS radical scavenging assay, reducing capacity and metal ion chelating capacity as well as total phenolic content of the extract were investigated. In addition, the inhibitory effects of ovatodiolide on mushroom tyrosinase, B16F10 intracellular tyrosinase and melanin content were determined spectrophotometrically. Our results revealed that the antioxidant capacities of <em>A. indicaem> methanol extract increased in a dose-dependent pattern. The purified ovatodiolide inhibited mushroom tyrosinase activity (IC50 = 0.253 mM, the compound also effectively suppressed intracellular tyrosinase activity (IC50 = 0.469 mM and decreased the amount of melanin (IC50 = 0.435 mM in a dose-dependent manner in B16F10 cells. Our results concluded that <em>A. indicaem> methanol extract displays antioxidant capacities and ovatodiolide purified from the extract inhibited melanogenesis in B16F10 cells. Hence, <em>A. indicaem> methanol extract and ovatodiolide could be applied as a type of dermatological whitening agent in skin care products.
-
Development of Non-Tracking Solar Thermal Technology
Winston, Roland; Johnston, Bruce; Balkowski, Kevin
2011-11-01
The aims of this research is to develop high temperature solar thermal collectors that do not require complex solar tracking devices to maintain optimal performance. The collector technology developed through these efforts uses non-imaging optics and is referred to as an external compound parabolic concentrator. It is able to operate with a solar thermal efficiency of approximately 50% at a temperature of 200 ° C and can be readily manufactured at a cost between 15 and 18 per square foot.
-
Robotics crosscutting program: Technology summary
International Nuclear Information System (INIS)
1996-08-01
The Office of Environmental Management (EM) is responsible for cleaning up the legacy of radioactive and chemically hazardous waste at contaminated sites and facilities throughout the U.S. Department of Energy (DOE) nuclear weapons complex, preventing further environmental contamination, and instituting responsible environmental management. Initial efforts to achieve this mission resulted in the establishment of environmental restoration and waste management programs. However, as EM began to execute its responsibilities, decision makers became aware that the complexity and magnitude of this mission could not be achieved efficiently, affordably, safely, or reasonably with existing technology. Once the need for advanced cleanup technologies became evident, EM established an aggressive, innovative program of applied research and technology development. The Office of Technology Development (OTD) was established in November 1989 to advance new and improved environmental restoration and waste management technologies that would reduce risks to workers, the public, and the environment; reduce cleanup costs; and devise methods to correct cleanup problems that currently have no solutions. In 1996, OTD added two new responsibilities - management of a Congressionally mandated environmental science program and development of risk policy, requirements, and guidance. OTD was renamed the Office of Science and Technology (OST). This documents presents information concerning robotics tank waste retrieval overview, robotic chemical analysis automation, robotics decontamination and dismantlement, and robotics crosscutting and advanced technology
-
Research and Development Needs for Building-Integrated Solar Technologies
Energy Technology Data Exchange (ETDEWEB)
none,
2014-01-01
The Building Technologies Office (BTO) has identified Building Integrated Solar Technologies (BIST) as a potentially valuable piece of the comprehensive pathway to help achieve its goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. This report helps to identify the key research and development (R&D) needs that will be required for BIST to make a substantial contribution toward that goal. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).
-
Energy Technology Data Exchange (ETDEWEB)
Bush, S.
2009-11-05
The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5
-
EM-21 Retrieval Knowledge Center: Waste Retrieval Challenges
Energy Technology Data Exchange (ETDEWEB)
Fellinger, Andrew P.; Rinker, Michael W.; Berglin, Eric J.; Minichan, Richard L.; Poirier, Micheal R.; Gauglitz, Phillip A.; Martin, Bruce A.; Hatchell, Brian K.; Saldivar, Eloy; Mullen, O Dennis; Chapman, Noel F.; Wells, Beric E.; Gibbons, Peter W.
2009-04-10
EM-21 is the Waste Processing Division of the Office of Engineering and Technology, within the U.S. Department of Energy’s (DOE) Office of Environmental Management (EM). In August of 2008, EM-21 began an initiative to develop a Retrieval Knowledge Center (RKC) to provide the DOE, high level waste retrieval operators, and technology developers with centralized and focused location to share knowledge and expertise that will be used to address retrieval challenges across the DOE complex. The RKC is also designed to facilitate information sharing across the DOE Waste Site Complex through workshops, and a searchable database of waste retrieval technology information. The database may be used to research effective technology approaches for specific retrieval tasks and to take advantage of the lessons learned from previous operations. It is also expected to be effective for remaining current with state-of-the-art of retrieval technologies and ongoing development within the DOE Complex. To encourage collaboration of DOE sites with waste retrieval issues, the RKC team is co-led by the Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL). Two RKC workshops were held in the Fall of 2008. The purpose of these workshops was to define top level waste retrieval functional areas, exchange lessons learned, and develop a path forward to support a strategic business plan focused on technology needs for retrieval. The primary participants involved in these workshops included retrieval personnel and laboratory staff that are associated with Hanford and Savannah River Sites since the majority of remaining DOE waste tanks are located at these sites. This report summarizes and documents the results of the initial RKC workshops. Technology challenges identified from these workshops and presented here are expected to be a key component to defining future RKC-directed tasks designed to facilitate tank waste retrieval solutions.
-
EM-21 Retrieval Knowledge Center: Waste Retrieval Challenges
International Nuclear Information System (INIS)
Fellinger, Andrew P.; Rinker, Michael W.; Berglin, Eric J.; Minichan, Richard L.; Poirier, Micheal R.; Gauglitz, Phillip A.; Martin, Bruce A.; Hatchell, Brian K.; Saldivar, Eloy; Mullen, O Dennis; Chapman, Noel F.; Wells, Beric E.; Gibbons, Peter W.
2009-01-01
EM-21 is the Waste Processing Division of the Office of Engineering and Technology, within the U.S. Department of Energy's (DOE) Office of Environmental Management (EM). In August of 2008, EM-21 began an initiative to develop a Retrieval Knowledge Center (RKC) to provide the DOE, high level waste retrieval operators, and technology developers with centralized and focused location to share knowledge and expertise that will be used to address retrieval challenges across the DOE complex. The RKC is also designed to facilitate information sharing across the DOE Waste Site Complex through workshops, and a searchable database of waste retrieval technology information. The database may be used to research effective technology approaches for specific retrieval tasks and to take advantage of the lessons learned from previous operations. It is also expected to be effective for remaining current with state-of-the-art of retrieval technologies and ongoing development within the DOE Complex. To encourage collaboration of DOE sites with waste retrieval issues, the RKC team is co-led by the Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL). Two RKC workshops were held in the Fall of 2008. The purpose of these workshops was to define top level waste retrieval functional areas, exchange lessons learned, and develop a path forward to support a strategic business plan focused on technology needs for retrieval. The primary participants involved in these workshops included retrieval personnel and laboratory staff that are associated with Hanford and Savannah River Sites since the majority of remaining DOE waste tanks are located at these sites. This report summarizes and documents the results of the initial RKC workshops. Technology challenges identified from these workshops and presented here are expected to be a key component to defining future RKC-directed tasks designed to facilitate tank waste retrieval solutions
-
RD50 Collaboration overview: Development of new radiation hard detectors
Energy Technology Data Exchange (ETDEWEB)
Kuehn, S., E-mail: susanne.kuehn@cern.ch
2016-07-11
Silicon sensors are widely used as tracking detectors in high energy physics experiments. This results in several specific requirements like radiation hardness and granularity. Therefore research for highly performing silicon detectors is required. The RD50 Collaboration is a CERN R&D collaboration dedicated to the development of radiation hard silicon devices for application in high luminosity collider experiments. Extensive research is ongoing in different fields since 2001. The collaboration investigates both defect and material characterization, detector characterization, the development of new structures and full detector systems. The report gives selected results of the collaboration and places an emphasis on the development of new structures, namely 3D devices, CMOS sensors in HV technology and low gain avalanche detectors. - Highlights: • The RD50 Collaboration is a CERN R&D collaboration dedicated to the development of radiation hard silicon devices for high luminosity collider experiments. • The collaboration investigates defect, material and detector characterization, the development of new structures and full detector systems. • Results of measured data of n-in-p type sensors allow recommendations for silicon tracking detectors at the HL-LHC. • The charge multiplication effect was investigated to allow its exploitation and resulted in new structures like LGAD sensors. • New sensor types like slim and active edge sensors, 3D detectors, and lately HVCMOS devices were developed in the active collaboration.
-
Directory of Open Access Journals (Sweden)
Xuemei Liu
2012-09-01
Full Text Available Cellulose synthase (CESA, which is an essential catalyst for the generation of plant cell wall biomass, is mainly encoded by the <em>CesA> gene family that contains ten or more members. In this study; four full-length cDNAs encoding CESA were isolated from<em> Betula platyphyllaem> Suk., which is an important timber species, using RT-PCR combined with the RACE method and were named as <em>BplCesA3em>, <em>−4em>,
-
Directory of Open Access Journals (Sweden)
Günther K. Bonn
2012-07-01
Full Text Available This study was designed to investigate the DNA-methylation status of <em>E>-cadherin (<em>CDH1em> and <em>H>-cadherin (<em>CDH13em> in serum samples of cervical cancer patients and control patients with no malignant diseases and to evaluate the clinical utility of these markers. DNA-methylation status of <em>CDH1em> and <em>CDH13em> was analyzed by means of MethyLight-technology in serum samples from 49 cervical cancer patients and 40 patients with diseases other than cancer. To compare this methylation analysis with another technique, we analyzed the samples with a denaturing high performance liquid chromatography (DHPLC PCR-method. The specificity and sensitivity of <em>CDH1em> DNA-methylation measured by MethyLight was 75% and 55%, and for <em>CDH13em> DNA-methylation 95% and 10%. We identified a specificity of 92.5% and a sensitivity of only 27% for the <em>CDH1em> DHPLC-PCR analysis. Multivariate analysis showed that serum <em>CDH1em> methylation-positive patients had a 7.8-fold risk for death (95% CI: 2.2–27.7; <em>p> = 0.001 and a 92.8-fold risk for relapse (95% CI: 3.9–2207.1; <em>p> = 0.005. We concluded that the serological detection of <em>CDH1em> and <em>CDH13em> DNA-hypermethylation is not an ideal diagnostic tool due to low diagnostic specificity and sensitivity. However, it was validated that <em>CDH1em> methylation analysis in serum samples may be of potential use as a prognostic marker for cervical cancer patients.
-
Candidíase em pacientes aidéticos
Directory of Open Access Journals (Sweden)
C.E.O.P. Campos
1992-09-01
Full Text Available Trinta e cinco aidéticos entre 19 e 55 anos admitidos e tratados de candidíase no Hospital Emílio Ribas, SP, com ELISA positivo para HIV e confirmado pelo Western Blot. Tuberculose em 9 sendo 2 com pericardite; neurotoxoplasmose em 6; neurocriptococose em 5; herpes labial em 4; pneumocistose em 3 e sarcoma de Kaposi em 2, achavam-se associadas. A concentração inibitória mínima 50% (MIC 50% para os azoles foi: ketoconazol= 2,2 µg/ml; itraconazol- 21,0 µg/ml; fluconazol = 19,0 µg/ml. O MIC 50% para ospolienos: nistatina- 50,0 µg/ml; anfotericina B= 0,12 µg/ml e para 5 fluorcitosina= 1,6 µg/ml nas 35 amostras de Candida isoladas. Testes não paramétricos de Siegel revelaram significante identificação (80% das Candida albicans na candidíase, e que a dose de AMB não modificou o número de óbitos, precoce e tardio, ocorridos nesses aidéticos. O uso prévio dos azoles e da nistatina explicaria, talvez, o elevado MIC 50% observado nas amostras de Candida isoladas.
-
Jeab at 50: coevolution of research and technology.
Lattal, Kennon A
2008-01-01
Evidence of how behavioral research and technology have evolved together abounds in the history of the Journal of the Experimental Analysis of Behavior (JEAB). Technology from outside the discipline (exogenous), from such disciplines as electronics and computer science, has been adapted for use in behavioral research. Technology from within the discipline (endogenous) has developed from both basic behavioral research and existing apparatus. All of these sources of technology have contributed to the corpus of behavioral research as it has evolved in JEAB. Such research, in turn, has provided the environmental pressure necessary for continuing technological evolution both within and outside the discipline. The new technology thus evolved further spurs research along in novel directions. This dynamic coevolutionary interplay between research and technology is an important variable in the past, present, and future of JEAB.
-
Plasma science and technology: 50 years of progress
International Nuclear Information System (INIS)
Cecchi, J.L.; Cecchi, L.M.
2003-01-01
During the first 50 years of the American Vacuum Society (1953-2003), technology has advanced greatly. But the most impressive and conspicuous advance has been in computational power, due to the exponential increase in computing power at an exponentially decreasing cost per function. Many of our readers will remember the 'Macro-Mechanical System' called a slide rule that was symbolic of engineers and scientists in the 1950s and 1960s. From the slide rule of the past to today's desktop and notebook computers, possessing speed, storage, and power capability that dwarf the mainframes of the recent past, what a transformation!
-
Efficient separations and processing crosscutting program overview
Energy Technology Data Exchange (ETDEWEB)
Gerdes, K.D. [Department of Energy, Germantown, MD (United States); Harness, J.L. [Department of Energy, Oak Ridge, TN (United States); Kuhn, W.L. [Pacific Northwest National Lab., Richland, WA (United States)
1997-10-01
The US Department of Energy (DOE) established the Office of Science and Technology (formerly the Office of Technology Development), as part of the Office of Environmental Management (EM) in November 1989. EM manages remediation of all DOE sites and wastes from current operations. The goal of the EM program is to minimize risks to human health, safety, and the environment and to bring all DOE sites into compliance with federal, state, and local regulations by the year 2019. The Office of Science and Technology (EM-50) is charged with developing and implementing new technologies that are safer, faster, more effective, and less expensive than current methods. To focus resources and address opportunities, EM-50 has targeted four major remediation and waste management problem areas within the DOE complex for action based on risk, prevalence, or need for technology development to meet environmental requirements and regulations. Other areas may be added or current areas further partitioned to ensure that research technology development programs remain focused on EM`s most pressing remediation and waste management needs. These major problem areas, called Focus Areas are: high-level waste tank remediation; mixed waste characterization, treatment, and disposal; subsurface contaminants; and facility transitioning, decommissioning, and final disposition.
-
International Space Station (ISS) Emergency Mask (EM) Development
Toon, Katherine P.; Hahn, Jeffrey; Fowler, Michael; Young, Kevin
2011-01-01
The Emergency Mask (EM) is considered a secondary response emergency Personal Protective Equipment (PPE) designed to provide respiratory protection to the International Space Station (ISS) crewmembers in response to a post-fire event or ammonia leak. The EM is planned to be delivered to ISS in 2012 to replace the current air purifying respirator (APR) onboard ISS called the Ammonia Respirator (AR). The EM is a one ]size ]fits ]all model designed to fit any size crewmember, unlike the APR on ISS, and uses either two Fire Cartridges (FCs) or two Commercial Off-the-Shelf (COTS) 3M(Trademark). Ammonia Cartridges (ACs) to provide the crew with a minimum of 8 hours of respiratory protection with appropriate cartridge swap ]out. The EM is designed for a single exposure event, for either post ]fire or ammonia, and is a passive device that cannot help crewmembers who cannot breathe on their own. The EM fs primary and only seal is around the wearer fs neck to prevent a crewmember from inhaling contaminants. During the development of the ISS Emergency Mask, several design challenges were faced that focused around manufacturing a leak free mask. The description of those challenges are broadly discussed but focuses on one key design challenge area: bonding EPDM gasket material to Gore(Registered Trademark) fabric hood.
-
Technology Requirements For In Situ Decommissioning Workshop Report
International Nuclear Information System (INIS)
Jannik, T.; Lee, P.; Gladden, J.; Langton, C.; Serrato, M.; Urland, C.; Reynolds, E.
2009-01-01
In recognition of the increasing attention being focused on In Situ Decommissioning (ISD or entombment) as an acceptable and beneficial decommissioning end state, the Department of Energy's (DOE) Office of Environmental Management (EM) is developing guidance for the implementation of ISD of excess facilities within the DOE complex. Consistent with the overarching DOE goals for increased personnel and environmental safety, reduced technical uncertainties and risks, and overall gains in efficiencies and effectiveness, EM's Office of Deactivation and Decommissioning and Facility Engineering (EM-23) initiated efforts to identify the technical barriers and technology development needs for the optimal implementation of ISD. Savannah River National Laboratory (SRNL), as the EM Corporate Laboratory, conducted an ISD Technology Needs Workshop to identify the technology needs at DOE sites. The overall goal of the workshop was to gain a full understanding of the specific ISD technical challenges, the technologies available, and those needing development. The ISD Workshop was held December 9-10, 2008 in Aiken, SC. Experienced decommissioning operations personnel from Richland Operations Office (RL), Idaho National Laboratory (INL) and Savannah River Site (SRS) along with scientists and engineers specific expertise were assembled to identify incremental and 'game changing' solutions to ISD technology challenges. The workshop and follow-up activities yielded 14 technology needs statements and the recommendation that EM-23 prioritize and pursue the following specific technology development and deployment actions. For each action, the recommended technology acquisition mechanisms (competitive solicitation (CS) or direct funding (TCR)) are provided. Activities that are time critical for ISD projects, or require unique capabilities that reside in the DOE Laboratory system will be funded directly to those institutions. Activities that have longer lead times and where the private
-
The 2017 Nobel Prize in Chemistry: cryo-EM comes of age.
Shen, Peter S
2018-03-01
The 2017 Nobel Prize in Chemistry was awarded to Jacques Dubochet, Joachim Frank, and Richard Henderson for "developing cryo-electron microscopy (cryo-EM) for the high-resolution structure determination of biomolecules in solution." This feature article summarizes some of the major achievements leading to the development of cryo-EM and recent technological breakthroughs that have transformed the method into a mainstream tool for structure determination.
-
Technology development for a Stirling radioisotope power system
International Nuclear Information System (INIS)
Thieme, Lanny G.; Qiu, Songgang; White, Maurice A.
2000-01-01
NASA Glenn Research Center and the Department of Energy are developing a Stirling convertor for an advanced radioisotope power system to provide spacecraft on-board electric power for NASA deep space missions. NASA Glenn is addressing key technology issues through the use of two NASA Phase II SBIRs with Stirling Technology Company (STC) of Kennewick, WA. Under the first SBIR, STC demonstrated a synchronous connection of two thermodynamically independent free-piston Stirling convertors and a 40 to 50 fold reduction in vibrations compared to an unbalanced convertor. The second SBIR is for the development of an Adaptive Vibration Reduction System (AVRS) that will essentially eliminate vibrations over the mission lifetime, even in the unlikely event of a failed convertor. This paper presents the status and results for these two SBIR projects and also discusses a new NASA Glenn in-house project to provide supporting technology for the overall Stirling radioisotope power system development. Tasks for this new effort include convertor performance verification, controls development, heater head structural life assessment, magnet characterization and thermal aging tests, FEA analysis for a lightweight alternator concept, and demonstration of convertor operation under launch and orbit transfer load conditions
-
ITEP: A survey of innovative environmental restoration technologies in the Netherlands and France
International Nuclear Information System (INIS)
Roberds, W.J.; Voss, C.F.; Hitchcock, S.A.
1995-05-01
The International Technology Exchange Program (ITEP) of the Department of Energy's (DOE's) Office of Environmental Management (EM) is responsible for promoting the import of innovative technologies to better address EM's needs and the export of US services into foreign markets to enhance US competitiveness. Under this program, potentially innovative environmental restoration technologies, either commercially available or under development in the Netherlands and France, were identified, described, and evaluated. It was found that 12 innovative environmental restoration technologies, which are either commercially available or under development in the Netherlands and France, may have some benefit for the DOE EM program and should be considered for transfer to the United States
-
Directory of Open Access Journals (Sweden)
Lei Zhang
2012-09-01
Full Text Available By introducing long carbon-chain alkyl groups at the C-13 position of berberine and palmatine, 13-<em>n>-hexyl/13-<em>n>-octyl berberine and palmatine chloride analogues 4a–d were synthesized and examined by MTT assays for cytotoxic activity in seven human cancer cell lines (7701QGY, SMMC7721, HepG2, CEM, CEM/VCR, KIII, Lewis, yielding IC50 values of 0.02 ± 0.01–13.58 ± 2.84 μM. 13-<em>n>-Octyl palmatine (compound 4d gave the most potent inhibitor activity, with an IC50 of 0.02 ± 0.01 μM for SMMC7721. In all cases, the 13-<em>n>-alkyl berberine and palmatine analogues 4a–d were more cytotoxic than berberine and palmatine. In addition, compounds 4a–d also exhibited more potent cytotoxicity than berberine and palmatine in mice with S180 sarcoma xenografted<em> in vivoem>. The primary screening results indicated that the 13-<em>n>-hexyl/13-<em>n>-octyl berberine and palmatine analogues might be valuable source for new potent anticancer drug candidates.
-
Innovative technology summary report: Transportable vitrification system
International Nuclear Information System (INIS)
1998-09-01
At the end of the cold war, many of the Department of Energy's (DOE's) major nuclear weapons facilities refocused their efforts on finding technically sound, economic, regulatory compliant, and stakeholder acceptable treatment solutions for the legacy of mixed wastes they had produced. In particular, an advanced stabilization process that could effectively treat the large volumes of settling pond and treatment sludges was needed. Based on this need, DOE and its contractors initiated in 1993 the EM-50 sponsored development effort required to produce a deployable mixed waste vitrification system. As a consequence, the Transportable Vitrification System (TVS) effort was undertaken with the primary requirement to develop and demonstrate the technology and associated facility to effectively vitrify, for compliant disposal, the applicable mixed waste sludges and solids across the various DOE complex sites. After 4 years of development testing with both crucible and pilot-scale melters, the TVS facility was constructed by Envitco, evaluated and demonstrated with surrogates, and then successfully transported to the ORNL ETTP site and demonstrated with actual mixed wastes in the fall of 1997. This paper describes the technology, its performance, the technology applicability and alternatives, cost, regulatory and policy issues, and lessons learned
-
International Nuclear Information System (INIS)
Fritsche, Uwe R.; Liptow, Holger
1999-01-01
The Environmental Manual for Power Development (EM) is a computerised tool to include environmental and cost data into the decision-making for energy projects in developing countries. The EM is sponsored by German BMZ (Ministry for Economic Co-operation and Development), Dutch DGIS (Directorate General for International Co-operation), British DfID (Department for International Development), and the World Bank. The EM was developed by GTZ with scientific support from Oeko-Institut (Institute for applied ecology). The EM tracks down the emissions and costs of e.g. the existing power supply system in a country, region, or of a specific energy project, and compares those to alternative options to deliver the same energy service, e.g. electricity, or process heat, or transport services. To do so, the EM maintains a comprehensive database on environmental and cost impacts of energy technologies, and determines environmental impacts for life-cycles: All impacts from mining, transport, conversion etc. can be accounted for. To consistently handle all life-cycles, the EM database offers a variety of pre-defined fuel-and life-cycles to work with. The Em database covers generic energy technologies in developing countries, especially fossil-fueled electricity and heating systems, cogeneration, renewable energies, selected energy efficiency technologies, nuclear power systems, as well as data for upstream activities like mining, fuel benefication, transport, and emission control technologies like flue-gas desulfurisation, low-NO x burners, etc. The EM analyses and compares airborne and greenhouse gas emissions, solid wastes, and land use, as well as internal and external costs associated with investment and operation of energy technologies, including their life-cycle (upstream fuel-cycles, materials). The Em helps to check the compliance of energy processes with given emission standards - its database offers such standard for various countries and regions, and users can test if
-
41 CFR 102-76.50 - What is sustainable development?
2010-07-01
... and Construction Sustainable Development § 102-76.50 What is sustainable development? Sustainable... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What is sustainable development? 102-76.50 Section 102-76.50 Public Contracts and Property Management Federal Property Management...
-
Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.
2010-01-01
Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.
-
Directory of Open Access Journals (Sweden)
Gianna Dondini
2004-06-01
Full Text Available Abstract Captivity observation on body weight cycle and digestive efficiency in <em>Pipistrellus kuhliiem> and <em>Hypsugo saviiem> (Chiroptera: Vespertilionidae Many bat species of cold-temperate climate are subject to seasonal variation of temperature and food availability. Fat reserve during summer-autumn is therefore a physiological adaptation to spend the winter months by hibernating or to sustain migration. During a research on bats in urban areas, two juveniles of Kuhl's bat (<em>Pipistrellus kuhliiem>, 2 females and two juveniles of Savi's bat (<em>Hypsugo saviiem>, 1 male and 1 female were collected in 1997 in the urban area of Florence (central Italy. Bats were kept in a cage of 50x40x30 cm with a temperature between 17° and 22° C. Every day they were weighted with an electronic balance before eating mealworms (<em>Tenebrio molitorem>. Digestive efficiency, calculated on dry material, was about 90% for both species. In about six months <em>P. kuhliiem> and <em>H. saviiem> increased on the average of 450% and 280% in weight respectively. Deposition of fat reserve seemed to be faster in <em>P. kuhliiem> than in <em>H. saviiem>. Both species showed a circannual cycle in the variation of weight. Riassunto Molte specie di pipistrelli dei climi temperato-freddi sono soggette a marcate variazioni stagionali di temperatura e disponibilità di cibo. L'accumulo di grasso in tarda estate-autunno è quindi un adattamento fisiologico per trascorrere in ibernazione i mesi invernali o per intraprendere la migrazione. Nell'ambito di una ricerca pluriennale sui pipistrelli in ambienti urbani, 4 esemplari giovani, di cui 2 di Pipistrello albolimbato (<em>Pipistrellus kuhliiem>, 2 femmine e due di Pipistrello di Savi (<em>Hypsugo saviiem>, 1 maschio e 1 femmina, sono stati raccolti nella pianura di Firenze durante l'estate del 1997 e mantenuti in un contenitore di 50x40x30 cm ad
-
A standard methodology for cost-effectiveness analysis of new environmental technologies
International Nuclear Information System (INIS)
Booth, S.R.; Trocki, L.K.; Bowling, L.
1994-01-01
This paper outlines a methodology that is being applied to assess the cost-effectiveness of new environmental technologies under development by EM-50, DOE. Performance, total system effects, and life-cycle costs are all considered in the methodology to compare new technologies with existing or base-line technologies. An example of performance characterization is given in the paper. Sources of data for cost estimates and technology characterizations also appear in the paper. The Department of Energy (DOE) is facing a massive clean up effort of waste sites that contain hazardous, radioactive, or mixed materials. DOE has recognized that improvements in environmental restoration and waste management methods can potentially save the taxpayers billions of dollars as older, less-effective technologies are displaced. Consequently, DOE has targeted significant funding to search for new technologies and to test and demonstrate them in rapid and cost-effective manner with the goal of applying them quickly to address environmental problems
-
Decontamination & decommissioning focus area
Energy Technology Data Exchange (ETDEWEB)
NONE
1996-08-01
In January 1994, the US Department of Energy Office of Environmental Management (DOE EM) formally introduced its new approach to managing DOE`s environmental research and technology development activities. The goal of the new approach is to conduct research and development in critical areas of interest to DOE, utilizing the best talent in the Department and in the national science community. To facilitate this solutions-oriented approach, the Office of Science and Technology (EM-50, formerly the Office of Technology Development) formed five Focus AReas to stimulate the required basic research, development, and demonstration efforts to seek new, innovative cleanup methods. In February 1995, EM-50 selected the DOE Morgantown Energy Technology Center (METC) to lead implementation of one of these Focus Areas: the Decontamination and Decommissioning (D & D) Focus Area.
-
Proceedings of Opportunity '95 -- Environmental technology through small business
International Nuclear Information System (INIS)
Kothari, V.P.
1994-11-01
The Opportunity '95--Environmental Technology Through Small Business conference was held November 16--17, 1994, at the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of the Environmental Management--Office of Technology Development (EM-OTD) Program at METC. The focus of this conference was also to address the accomplishments and barriers affecting small businesses, and lay the groundwork for future technology development initiatives and opportunities. Twenty papers were presented in three EM-OTD focus areas: mixed waste characterization, treatment and disposal (6 papers); contaminant plume containment and remediation (6 papers); and facility transitioning, decommissioning and final disposition (8 papers). In addition to the presentations, nine posters of environmental management areas were displayed. A panel discussion was also held on technology development assistance to small businesses. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database
-
Demonstrating and Deploying Private Sector Technologies at DOE Sites - Issues to be Overcome
International Nuclear Information System (INIS)
Bedick, R. C.
2002-01-01
The Department of Energy (DOE), Office of Environmental Management (EM) continues to pursue cost-effective, environmental cleanup of the weapons complex sites with a concomitant emphasis on deployment of innovative technologies as a means to this end. The EM Office of Science and Technology (OST) pursues a strategy that entails identification of technologies that have potential applications throughout the DOE complex: at multiple DOE sites and at multiple facilities on those sites. It further encourages a competitive procurement process for the various applications entailed in the remediation of a given facility. These strategies require a competitive private-sector supplier base to help meet EM needs. OST supports technology development and deployment through investments in partnerships with private industry to enhance the acceptance of their technology products within the DOE market. Since 1992, OST and the National Energy Technology Laboratory (NETL) have supported the re search and development of technology products and services offered by the private sector. During this time, NETL has managed over 140 research and development projects involving industrial and university partners. These projects involve research in a broad range of EM related topics, including deactivation and decommissioning, characterization, monitoring, sensors, waste separation, groundwater remediation, robotics, and mixed waste treatment. Successful partnerships between DOE and Industry have resulted in viable options for EM's cleanup needs, and require continued marketing efforts to ensure that these technology solutions are used at multiple DOE sites and facilities
-
An EM System With Dramatic Multi-Axis Transmitter and Tensor Gradiometer Receiver
2011-06-01
Thus, the main difference between the spatial behavior of target anomalies measured with a magnetometer and those we measured with an EM system is in...current efforts include the development of tensor magnetic gradiometers based on triaxial fluxgate technology by the USGS (Snyder & Bracken, Development...Superconducting gradiometer/ Magnetometer Arrays and a Novel Signal Processing Technique. IEEE Trans. on Magnetics, MAG-11(2), 701-707. EM Tensor Gradiometer
-
Directory of Open Access Journals (Sweden)
Jeanne F. Millogo
2012-06-01
Full Text Available This paper describes a preliminary assessment of the nutraceutical value of <em>Amaranthus cruentus (A. cruentusem> and <em>Amaranthus hybridus (A. hybridusem>, two food plant species found in Burkina Faso. Hydroacetonic (HAE, methanolic (ME, and aqueous extracts (AE from the aerial parts were screened for <em>in vitroem> antioxidant and xanthine oxidase inhibitory activities. Phytochemical analyses revealed the presence of polyphenols, tannins, flavonoids, steroids, terpenoids, saponins and betalains. Hydroacetonic extracts have shown the most diversity for secondary metabolites. The TLC analyses of flavonoids from HAE extracts showed the presence of rutin and other unidentified compounds. The phenolic compound contents of the HAE, ME and AE extracts were determined using the Folin–Ciocalteu method and ranged from 7.55 to 10.18 mg Gallic acid equivalent GAE/100 mg. Tannins, flavonoids, and flavonols ranged from 2.83 to 10.17 mg tannic acid equivalent (TAE/100 mg, 0.37 to 7.06 mg quercetin equivalent (QE /100 mg, and 0.09 to 1.31 mg QE/100 mg, respectively. The betacyanin contents were 40.42 and 6.35 mg Amaranthin Equivalent/100 g aerial parts (dry weight in <em>A. cruentusem> and <em>A. hybridusem>, respectively. Free-radical scavenging activity expressed as IC50 (DPPH method and iron reducing power (FRAP method ranged from 56 to 423 µg/mL and from 2.26 to 2.56 mmol AAE/g, respectively. Xanthine oxidase inhibitory activities of extracts of <em>A. cruentus em>and <em>A. hybridusem> were 3.18% and 38.22%, respectively.<em> em>The
-
Energy Technology Data Exchange (ETDEWEB)
Fritsche, Uwe R. [Oeko-Institut, Energy Div., Darmstadt (Germany); Liptow, Holger [Deutsche Gesellschaft fuer Technische Zusammenarbeit GmbH (GTZ), Climate Change Programme, Eschborn (Germany)
1999-07-01
The Environmental Manual for Power Development (EM) is a computerised tool to include environmental and cost data into the decision-making for energy projects in developing countries. The EM is sponsored by German BMZ (Ministry for Economic Co-operation and Development), Dutch DGIS (Directorate General for International Co-operation), British DfID (Department for International Development), and the World Bank. The EM was developed by GTZ with scientific support from Oeko-Institut (Institute for applied ecology). The EM tracks down the emissions and costs of e.g. the existing power supply system in a country, region, or of a specific energy project, and compares those to alternative options to deliver the same energy service, e.g. electricity, or process heat, or transport services. To do so, the EM maintains a comprehensive database on environmental and cost impacts of energy technologies, and determines environmental impacts for life-cycles: All impacts from mining, transport, conversion etc. can be accounted for. To consistently handle all life-cycles, the EM database offers a variety of pre-defined fuel-and life-cycles to work with. The Em database covers generic energy technologies in developing countries, especially fossil-fueled electricity and heating systems, cogeneration, renewable energies, selected energy efficiency technologies, nuclear power systems, as well as data for upstream activities like mining, fuel benefication, transport, and emission control technologies like flue-gas desulfurisation, low-NO{sub x} burners, etc. The EM analyses and compares airborne and greenhouse gas emissions, solid wastes, and land use, as well as internal and external costs associated with investment and operation of energy technologies, including their life-cycle (upstream fuel-cycles, materials). The Em helps to check the compliance of energy processes with given emission standards - its database offers such standard for various countries and regions, and users can
-
The Soils and Groundwater – EM-20 S&T Roadmap Quality Assurance Project Plan
Energy Technology Data Exchange (ETDEWEB)
Fix, N. J.
2008-02-11
The Soils and Groundwater – EM-20 Science and Technology Roadmap Project is a U.S. Department of Energy, Office of Environmental Management-funded initiative designed to develop new methods, strategies and technology for characterizing, modeling, remediating, and monitoring soils and groundwater contaminated with metals, radionuclides, and chlorinated organics. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by EM-20 Roadmap Project staff.
-
Directory of Open Access Journals (Sweden)
José Gabriel Segarra-Moragues
2012-09-01
Full Text Available Polymorphic microsatellite markers were developed for the Ibero-North African, strict gypsophyte <em>Lepidium subulatumem> to unravel the effects of habitat fragmentation in levels of genetic diversity, genetic structure and gene flow among its populations. Using 454 pyrosequencing 12 microsatellite loci including di- and tri-nucleotide repeats were characterized in <em>L. subulatumem>. They amplified a total of 80 alleles (2–12 alleles per locus in a sample of 35 individuals of <em>L. subulatumem>, showing relatively high levels of genetic diversity, <em>H>O = 0.645, <em>H>E = 0.627. Cross-species transferability of all 12 loci was successful for the Iberian endemics <em>Lepidium cardaminesem>, <em>Lepidium stylatumem>, and the widespread, <em>Lepidium graminifoliumem> and one species each of two related genera, <em>Cardaria drabaem> and <em>Coronopus didymusem>. These microsatellite primers will be useful to investigate genetic diversity, population structure and to address conservation genetics in species of <em>Lepidium>.
-
Energy Technology Data Exchange (ETDEWEB)
Chausa, P.; Gomez, A.J.; Apers, L.; Henwood, F.; Mandalia, S.; Wallitt, E.; Leon, A.; Begovac, J.; Borges, M.; Brown, A.; Block, K.; Glaysher, B.; Whetham, J.
2016-07-01
The EmERGE project (http://www.emergeproject.eu/) will develop a mHealth platform to enable self-management of HIV in patients with stable disease. The platform will build upon and integrate the existing mHealth solutions operated by pioneering healthcare providers in the UK and Spain and apply a rigorous co-design approach to ensure patient and clinician input to the solution. The platform will provide users with web based (clinicians) and mobile device applications (patients) which interface securely with relevant medical data and facilitate remote access to key healthcare providers. EATG, the leading European HIV patient organisation, will provide a direct and deep interaction with representative patients and clinicians from 5 EU countries. The platform and interfaces will be validated in a large study of 3900 patients using a tailored Health Technology Assessment process: the Model for Assessment of Telemedicine applications, specifically developed for the assessment of mHealth solutions including translatability as a key factor. (Author)
-
International Nuclear Information System (INIS)
1996-08-01
To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this new approach, EM developed a management structure and principles that led to the creation of specific Focus Areas. These organizations were designed to focus the scientific and technical talent throughout DOE and the national scientific community on the major environmental restoration and waste management problems facing DOE. The Focus Area approach provides the framework for intersite cooperation and leveraging of resources on common problems. After the original establishment of five major Focus Areas within the Office of Technology Development (EM-50, now called the Office of Science and Technology), the Nuclear Materials Stabilization Task Group (EM-66) followed the structure already in place in EM-50 and chartered the Plutonium Focus Area (PFA). The following information outlines the scope and mission of the EM, EM-60, and EM-66 organizations as related to the PFA organizational structure
-
Superconducting Electromagnetic Suspension (EMS) system for Grumman Maglev concept
Kalsi, Swarn S.
1994-01-01
The Grumman developed Electromagnetic Suspension (EMS) Maglev system has the following key characteristics: a large operating airgap--40 mm; levitation at all speeds; both high speed and low speed applications; no deleterious effects on SC coils at low vehicle speeds; low magnetic field at the SC coil--less than 0.35 T; no need to use non-magnetic/non-metallic rebar in the guideway structure; low magnetic field in passenger cabin--approximately 1 G; low forces on the SC coil; employs state-of-the-art NbTi wire; no need for an active magnet quench protection system; and lower weight than a magnet system with copper coils. The EMS Maglev described in this paper does not require development of any new technologies. The system could be built with the existing SC magnet technology.
-
Development of sodium technology
International Nuclear Information System (INIS)
Hwang, Sung Tai; Nam, H. Y.; Choi, Y. D.
2000-05-01
The objective of present study is to produce the experimental data for development and verification of computer codes for development of LMR and to develop the preliminary technologies for the future large scale verification experiments. A MHD experimental test loop has been constructed for the quantitative analysis of the effect of magnetic field on the sodium flow and experiments are carried out for three EM pumps. The previous pressure drop correlations are evaluated using the experimental data obtained from the pressure drop experiment in a 19-pin fuel assembly with wire spacer. An dimensionless variable is proposed to describe the amplitude and frequency of the fluctuation of free surface using the experimental data obtained from free surface experimental apparatus and an empirical correlation is developed using this dimensionless variable. An experimental test loop is constructed to measure the flow characteristics in IHX shell side and the local pressure drop in fuel assembly, and to test the vibration behaviour of fuel pins due to flow induced vibration. The sodium two-phase flow measuring technique using the electromagnetic flowmeter is developed and the sodium differential pressure drop measuring technique using the method of direct contact of sodium and oil is established. The work on the analysis of sodium fire characteristics and produce data for vlidation of computer code is performed. Perfect reopen time of self plugged leak path was observed to be about 130 minutes after water leak initiation. Reopen shape of a specimen appeared to be double layer of circular type, and reopen size of this specimen surface was about 2mm diameter on sodium side. In small water leakage experiments, the following correlation equation about the reopen time between sodium temperature and initial leak rate was obtained, τ c = δ·g -0.83 ·10 (3570/T Na -3.34) , in 400-500 deg C of liquid sodium atmosphere. The characteristics of pressure propagation and gas flow, and
-
Development of sodium technology
Energy Technology Data Exchange (ETDEWEB)
Hwang, Sung Tai; Nam, H Y; Choi, Y D [and others
2000-05-01
The objective of present study is to produce the experimental data for development and verification of computer codes for development of LMR and to develop the preliminary technologies for the future large scale verification experiments. A MHD experimental test loop has been constructed for the quantitative analysis of the effect of magnetic field on the sodium flow and experiments are carried out for three EM pumps. The previous pressure drop correlations are evaluated using the experimental data obtained from the pressure drop experiment in a 19-pin fuel assembly with wire spacer. An dimensionless variable is proposed to describe the amplitude and frequency of the fluctuation of free surface using the experimental data obtained from free surface experimental apparatus and an empirical correlation is developed using this dimensionless variable. An experimental test loop is constructed to measure the flow characteristics in IHX shell side and the local pressure drop in fuel assembly, and to test the vibration behaviour of fuel pins due to flow induced vibration. The sodium two-phase flow measuring technique using the electromagnetic flowmeter is developed and the sodium differential pressure drop measuring technique using the method of direct contact of sodium and oil is established. The work on the analysis of sodium fire characteristics and produce data for vlidation of computer code is performed. Perfect reopen time of self plugged leak path was observed to be about 130 minutes after water leak initiation. Reopen shape of a specimen appeared to be double layer of circular type, and reopen size of this specimen surface was about 2mm diameter on sodium side. In small water leakage experiments, the following correlation equation about the reopen time between sodium temperature and initial leak rate was obtained, {tau}{sub c} = {delta}{center_dot}g{sup -0.83}{center_dot}10{sup (3570/T{sub Na}-3.34)}, in 400-500 deg C of liquid sodium atmosphere. The characteristics
-
Fluid-based radon mitigation technology development for industrial applications
International Nuclear Information System (INIS)
Liu, K.V.; Gabor, J.D.; Holtz, R.E.; Gross, K.C.
1996-01-01
The objective of the radon mitigation technology development effort is to develop an efficient and economical radon gas removal technology based on a fluid absorption process. The technology must be capable of cleaning up a wide range of radon gas stream concentrations to a level that meets EPA gas emission standards for residential and industrial applications. Argonne has recently identified a phenomenon that offers the possibility of radon recovery from the atmosphere with high efficiency at room temperature, and radon release at slightly elevated temperatures (50-60 degrees C.) such a device would offer numerous substantial advantages over conventional cryogenic charcoal systems for the removal of radon. Controlled sources of radon in Argonne's radon research facility are being used to quantitatively assess the performance of a selected class of absorbing fluids over a range of radon concentrations. This paper will discuss the design of laboratory- and engineering-scale radon absorption units and present some preliminary experimental test results
-
Critical Low-Noise Technologies Being Developed for Engine Noise Reduction Systems Subproject
Grady, Joseph E.; Civinskas, Kestutis C.
2004-01-01
NASA's previous Advanced Subsonic Technology (AST) Noise Reduction Program delivered the initial technologies for meeting a 10-year goal of a 10-dB reduction in total aircraft system noise. Technology Readiness Levels achieved for the engine-noise-reduction technologies ranged from 4 (rig scale) to 6 (engine demonstration). The current Quiet Aircraft Technology (QAT) project is building on those AST accomplishments to achieve the additional noise reduction needed to meet the Aerospace Technology Enterprise's 10-year goal, again validated through a combination of laboratory rig and engine demonstration tests. In order to meet the Aerospace Technology Enterprise goal for future aircraft of a 50- reduction in the perceived noise level, reductions of 4 dB are needed in both fan and jet noise. The primary objectives of the Engine Noise Reduction Systems (ENRS) subproject are, therefore, to develop technologies to reduce both fan and jet noise by 4 dB, to demonstrate these technologies in engine tests, and to develop and experimentally validate Computational Aero Acoustics (CAA) computer codes that will improve our ability to predict engine noise.
-
Development of the Information Technology Sector in India: the Role of Government
Directory of Open Access Journals (Sweden)
Inna S. Ashmyanskaya
2014-01-01
Full Text Available In the article the author analyses the role of government in developing the information technology sector in India, specifically its influence on the three factors that determine the development of the information technology sector: human resources, launch capital and infrastructure. By developing these factors, the Indian government has succeeded in prompt formation and promotion of the information technology sector. The development of human capital is mainly realized by developing public education programs. The establishment of close ties with the Indian diaspora played a crucial role. The diaspora acted as a link for transmission to India of expertise, investment and knowledge. The availability of start-up capital, especially venture capital, is another essential component for the success of the national information technology sector. The conditions created by a government for the development of the institution of venture investment in the country will be of fundamental importance. Thanks to the measures taken by the government of India, venture capital investment has become the main form of financing for start-ups in the information technology sector in India. Developed infrastructure is also an important factor in the development of the information technology sector. In India, a developing country with a vast territory, there was a problem of infrastructure development, and software technology parks became a solution to this problem for companies in the information technology sector. Over the past 20 years, software technology parks in India has evolved so that industrial parks created almost 50% of the total exports of the IT sector in India. The demonstrated state policy can be characterized as the model of state technological entrepreneurship according to which the Indian government played the roles of regulator, producer and promoter in the information technology sector and continues to do so until the present day.
-
Development of Korea telecommunication technology
International Nuclear Information System (INIS)
1992-06-01
It concentrates on development of Korea telecommunication technology, which is made up seven chapters. It gives description of manual central telephone exchange or private automatic telephone exchange, transmission technology on wire line and cable line technology and optical transmission, radio communication technology on mobile and natural satellite communication, network technology with intelligent network, broadband ISDN and packet switched Data Network, terminal technology with telephone and data communication terminal and development of Information Technology in Korea. It has an appendix about development of military communication system.
-
Development priorities for in-space propulsion technologies
Johnson, Les; Meyer, Michael; Palaszewski, Bryan; Coote, David; Goebel, Dan; White, Harold
2013-02-01
During the summer of 2010, NASA's Office of Chief Technologist assembled 15 civil service teams to support the creation of a NASA integrated technology roadmap. The Aero-Space Technology Area Roadmap is an integrated set of technology area roadmaps recommending the overall technology investment strategy and prioritization for NASA's technology programs. The integrated set of roadmaps will provide technology paths needed to meet NASA's strategic goals. The roadmaps have been reviewed by senior NASA management and the National Research Council. With the exception of electric propulsion systems used for commercial communications satellite station-keeping and a handful of deep space science missions, almost all of the rocket engines in use today are chemical rockets; that is, they obtain the energy needed to generate thrust by combining reactive chemicals to create a hot gas that is expanded to produce thrust. A significant limitation of chemical propulsion is that it has a relatively low specific impulse. Numerous concepts for advanced propulsion technologies with significantly higher values of specific impulse have been developed over the past 50 years. Advanced in-space propulsion technologies will enable much more effective exploration of our solar system, near and far, and will permit mission designers to plan missions to "fly anytime, anywhere, and complete a host of science objectives at the destinations" with greater reliability and safety. With a wide range of possible missions and candidate propulsion technologies with very diverse characteristics, the question of which technologies are 'best' for future missions is a difficult one. A portfolio of technologies to allow optimum propulsion solutions for a diverse set of missions and destinations are described in the roadmap and herein.
-
The development of application technology for image processing in nuclear facilities
International Nuclear Information System (INIS)
Lee, Jong Min; Lee, Yong Bum; Kim, Woog Ki; Sohn, Surg Won; Kim, Seung Ho; Hwang, Suk Yeoung; Kim, Byung Soo
1991-01-01
The object of this project is to develop application technology of image processing in nuclear facilities where image signal are used for reliability and safety enhancement of operation, radiation exposure reduce of operator, and automation of operation processing. We has studied such application technology for image processing in nuclear facilities as non-tactile measurement, remote and automatic inspection, remote control, and enhanced analysis of visual information. On these bases, automation system and real-time image processing system are developed. Nuclear power consists in over 50% share of electic power supply of our country nowdays. So, it is required of technological support for top-notch technology in nuclear industry and its related fields. Especially, it is indispensable for image processing technology to enhance the reliabilty and safety of operation, to automate the process in a place like a nuclear power plant and radioactive envionment. It is important that image processing technology is linked to a nuclear engineering, and enhance the reliability abd safety of nuclear operation, as well as decrease the dose rate. (Author)
-
Technology development for safeguards
Energy Technology Data Exchange (ETDEWEB)
Kim, Ho Dong; Kang, H. Y.; Song, D. Y. [and others
2005-04-01
The objective of this project are to establish the safeguards technology of the nuclear proliferation resistance to the facilities which handle with high radioactivity nuclear materials like the spent fuel, to provide the foundation of the technical independency for the establishment of the effective management of domestic spent fuels, and to construct the base of the early introduction of the key technology relating to the back-end nuclear fuel cycle through the development of the safeguards technology of the DFDF of the nuclear non-proliferation. The essential safeguards technologies of the facility such as the measurement and account of nuclear materials and the C/S technology were carried out in this stage (2002-2004). The principal results of this research are the development of error reduction technology of the NDA equipment and a new NDA system for the holdup measurement of process materials, the development of the intelligent surveillance system based on the COM, the evaluation of the safeguardability of the Pyroprocessing facility which is the core process of the nuclear fuel cycle, the derivation of the research and development items which are necessary to satisfy the safeguards criteria of IAEA, and the presentation of the direction of the technology development relating to the future safeguards of Korea. This project is the representative research project in the field of the Korea's safeguards. The safeguards technology and equipment developed while accomplishing this project can be applied to other nuclear fuel cycle facilities as well as DFDF and will be contributed to increase the international confidence in the development of the nuclear fuel cycle facility of Korea and its nuclear transparency.
-
Advanced PWR technology development -Development of advanced PWR system analysis technology-
Energy Technology Data Exchange (ETDEWEB)
Jang, Moon Heui; Hwang, Yung Dong; Kim, Sung Oh; Yoon, Joo Hyun; Jung, Bub Dong; Choi, Chul Jin; Lee, Yung Jin; Song, Jin Hoh [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
1995-07-01
The primary scope of this study is to establish the analysis technology for the advanced reactor designed on the basis of the passive and inherent safety concepts. This study is extended to the application of these technology to the safety analysis of the passive reactor. The study was performed for the small and medium sized reactor and the large sized reactor by focusing on the development of the analysis technology for the passive components. Among the identified concepts the once-through steam generator, the natural circulation of the integral reactor, heat pipe for containment cooling, and hydraulic valve were selected as the high priority items to be developed and the related studies are being performed for these items. For the large sized passive reactor, the study plans to extend the applicability of the best estimate computer code RELAP5/MOD3 which is widely used for the safety analyses of the reactor system. The improvement and supplementation study of the analysis modeling and the methodology is planned to be carried out for these purpose. The newly developed technologies are expected to be applied to the domestic advanced reactor design and analysis and these technologies will play a key role in extending the domestic nuclear base technology and consolidating self-reliance in the essential nuclear technology. 72 figs, 15 tabs, 124 refs. (Author).
-
Cooperative technology development: An approach to advancing energy technology
International Nuclear Information System (INIS)
Stern, T.
1989-09-01
Technology development requires an enormous financial investment over a long period of time. Scarce national and corporate resources, the result of highly competitive markets, decreased profit margins, wide currency fluctuations, and growing debt, often preclude continuous development of energy technology by single entities, i.e., corporations, institutions, or nations. Although the energy needs of the developed world are generally being met by existing institutions, it is becoming increasingly clear that existing capital formation and technology transfer structures have failed to aid developing nations in meeting their growing electricity needs. This paper will describe a method for meeting the electricity needs of the developing world through technology transfer and international cooperative technology development. The role of nuclear power and the advanced passive plant design will be discussed. (author)
-
International Nuclear Information System (INIS)
Peterson, M.
1992-08-01
The Department of Energy's Office of Technology Development has instituted an integrated program focused on development of in situ remediation technologies. The development of in situ remediation technologies will focus on five problem groups: buried waste, contaminated soils, contaminated groundwater, containerized wastes and underground detonation sites. The contaminants that will be included in the development program are volatile and non volatile organics, radionuclides, inorganics and highly explosive materials as well as mixtures of these contaminants. The In Situ Remediation Integrated Program (ISR IP) has defined the fiscal year 1993 research and development technology areas for focusing activities, and they are described in this paper. These R ampersand D topical areas include: nonbiological in situ treatment, in situ bioremediation, electrokinetics, and in situ containment
-
International Nuclear Information System (INIS)
Henry, R.; Sumpter, K.C.
1995-01-01
In 1992, the Secretary of Energy directed the Assistant Secretary for Environmental Management (EM) to develop an integrated, long-term, spent nuclear fuel (SNF) management program. In response, EM created the Integrated SNF Program to assess the US Department of Energy (DOE) SNF and SNF storage facilities. As shown in Figure 1 the Integrated SNF Program is responsible for life-cycle management of DOE SNF; that is characterization, processing, interim storage and preparation for disposal. In order to implement the Program it was recognized that technology needs must be identified. A Technology Integration Program was formed to integrate the DOE complex-wide efforts for establishing timely, cost effective and consistent technical criteria for the development of technical solutions. The program is directed toward identification of: (a) what activities need to be done, (b) when they need to be completed, and (c) what priority should be assigned to the various activities
-
International Nuclear Information System (INIS)
Kim, Yu Seok; Chai, Jong Seo; Bak, Seong Ki; Park, Chan Won; Jo, Young Ho; Hong, Seong Seok; Lee, Min Yong; Jang Ho Ha
2000-01-01
The first cyclotron in Korea, MC-50 cyclotron is used for neutron irradiation, radionuclide development, production and material and biomedical research. 50.5MeV and 35MeV proton beam have been extracted with 20-60μA. A total of beam extraction time are 1095.7 hours. 206.5 hours are used for the developments and 663.8 hours are for radionuclide production and development and 225.4 hours for application researches. The shutdown days are 23 days. Fundamental data for failure decrement and efficient beam extraction were composed and maintenance technologies were developed
-
Energy Technology Data Exchange (ETDEWEB)
Kim, Yu Seok; Chai, Jong Seo; Bak, Seong Ki; Park, Chan Won; Jo, Young Ho; Hong, Seong Seok; Lee, Min Yong; Jang Ho Ha
2000-01-01
The first cyclotron in Korea, MC-50 cyclotron is used for neutron irradiation, radionuclide development, production and material and biomedical research. 50.5MeV and 35MeV proton beam have been extracted with 20-60{mu}A. A total of beam extraction time are 1095.7 hours. 206.5 hours are used for the developments and 663.8 hours are for radionuclide production and development and 225.4 hours for application researches. The shutdown days are 23 days. Fundamental data for failure decrement and efficient beam extraction were composed and maintenance technologies were developed.
-
A survey of environmental needs and innovative technologies in Germany
International Nuclear Information System (INIS)
Voss, C.F.; Roberds, W.J.
1995-05-01
The International Technology Program (IT?), formerly the international Technology Exchange Program (ITEP), of the Department of Energy's (DOE's) Office of Environmental Restoration and Waste Management (EM) is responsible for promoting: (1) the import of innovative technologies to better address EM's needs; and (2) the export of US services into foreign markets to enhance US competitiveness. Under this program: (1) the environmental restoration market in Germany was evaluated, including the description of the general types of environmental problems, the environmental regulations, and specific selected contaminated sites; and (2) potentially innovative environmental restoration technologies, either commercially available or under development in Germany, were identified, described and evaluated. It was found that: (1) the environmental restoration market in Germany is very large, on the order of several billion US dollars per year, with a significant portion possibly available to US businesses; and (2) a large number (54) of innovative environmental restoration technologies, which are either commercially available or under development in Germany, may have some benefit to the DOE EM program and should be considered for transfer to the US
-
Summary of fiscal year 1994 near-infrared spectroscopy moisture sensing activities
International Nuclear Information System (INIS)
Reich, F.R.; Johnson, R.E.; Philipp, B.L.; Duncan, J.B.; Schutzenhofer, G.L.
1995-01-01
This report summarizes the work to develop and deploy near-infrared (NIR) moisture sensing technology for application to the Hanford Site's high-level nuclear waste materials. This work is jointly supported by the U.S. Department of Energy's (DOE) EM-50 Office of Technology Development Support and the EM-30 Tank Waste Safety and Tank Waste Remediation Systems Programs. A basic NIR system was developed at the Savannah River Laboratory (SRL) with support from DOE's EM-50 Office. The application of this technology to Hanford's high-level wastes (HLW). Including deployment, is supported by DOE's EM-30 Systems Programs. The need to know the moisture content in HLW is driven by concerns for the safety of underground storage tanks that contain or are suspected of containing ferrocyanide and organic types of materials. The NIR technology has application for both ex situ (hot cell core measurements) and in situ waste tank moisture sensing. The cold test/calibration data in this report was generated as part of the total life cycle development path being followed in the development and deployment of the NIR technology at the Hanford Site
-
Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)
Energy Technology Data Exchange (ETDEWEB)
Moe, Wayne L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)
2017-08-23
This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory
-
Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)
Energy Technology Data Exchange (ETDEWEB)
Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)
2015-05-01
This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory
-
Candidíase em pacientes aidéticos
Directory of Open Access Journals (Sweden)
C.E.O.P. Campos
1992-09-01
Full Text Available Trinta e cinco aidéticos entre 19 e 55 anos admitidos e tratados de candidíase no Hospital Emílio Ribas, SP, com ELISA positivo para HIV e confirmado pelo Western Blot. Tuberculose em 9 sendo 2 com pericardite; neurotoxoplasmose em 6; neurocriptococose em 5; herpes labial em 4; pneumocistose em 3 e sarcoma de Kaposi em 2, achavam-se associadas. A concentração inibitória mínima 50% (MIC 50% para os azoles foi: ketoconazol= 2,2 µg/ml; itraconazol- 21,0 µg/ml; fluconazol = 19,0 µg/ml. O MIC 50% para ospolienos: nistatina- 50,0 µg/ml; anfotericina B= 0,12 µg/ml e para 5 fluorcitosina= 1,6 µg/ml nas 35 amostras de Candida isoladas. Testes não paramétricos de Siegel revelaram significante identificação (80% das Candida albicans na candidíase, e que a dose de AMB não modificou o número de óbitos, precoce e tardio, ocorridos nesses aidéticos. O uso prévio dos azoles e da nistatina explicaria, talvez, o elevado MIC 50% observado nas amostras de Candida isoladas.A total of 35 in patients admitted at Emilio Ribas Hospital - São Paulo, Brazil, with digestive candidiasis and AIDS clinical diagnostic were evaluated 10 month later, being 29 male and 6 female; white outnumbering black with age ranged from 30 to 50 years old. Agar Sabouraud culture and tube germinative tests identified 28 (80% Candida albicans out 35 strains. Minimum inhibitory concentration (MIC 50% was against azoles (ketoconazole= 2.2 µg/ml; itraconazole = 21.0 µg/ml and fluconazole- 19.0 µg/ml; polyenes (ny statine - 50.0 µg/ml and amphotericin B= 0.12 µg/ml and 5 fluorcytosine= 1.6µg/ml. Siegeltests showed significant Candida albicans proportions in strains isolated from 35 AIDS patients. There was no significant relation between AMB dosis and early or late death. Conclusions: candidiasis in AIDS patients showed high MIC 50% to azoles and nystatine and significant Candida albicans proportion in all strains isolated from AIDS patients. Previous amphotericin B
-
Bioassay-Guided Antidiabetic Study of <em>Phaleria macrocarpaem> Fruit Extract
Directory of Open Access Journals (Sweden)
Mohd Z. Asmawi
2012-04-01
Full Text Available An earlier anti-hyperglycemic study with serial crude extracts of <em>Phaleria macrocarpaem> (PM fruit indicated methanol extract (ME as the most effective. In the present investigation, the methanol extract was further fractionated to obtain chloroform (CF, ethyl acetate (EAF, <em>n>-butanol (NBF and aqueous (AF fractions, which were tested for antidiabetic activity. The NBF reduced blood glucose (<em>p> < 0.05 15 min after administration, in an intraperitoneal glucose tolerance test (IPGTT similar to metformin. Moreover, it lowered blood glucose in diabetic rats by 66.67% (<em>p
-
DEPARTMENT OF ENERGY SOIL AND GROUNDWATER SCIENCE AND TECHNOLOGY NEEDS, PLANS AND INITIATIVES
Energy Technology Data Exchange (ETDEWEB)
Aylward, B; V. ADAMS, V; G. M. CHAMBERLAIN, G; T. L. STEWART, T
2007-12-12
This paper presents the process used by the Department of Energy (DOE) Environmental Management (EM) Program to collect and prioritize DOE soil and groundwater site science and technology needs, develop and document strategic plans within the EM Engineering and Technology Roadmap, and establish specific program and project initiatives for inclusion in the EM Multi-Year Program Plan. The paper also presents brief summaries of the goals and objectives for the established soil and groundwater initiatives.
-
The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)
Energy Technology Data Exchange (ETDEWEB)
NONE
1996-03-01
This document has been prepared by the US Department of Energy`s (DOE`s) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE`s Operations Office and Energy Technology Centers.
-
The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)
International Nuclear Information System (INIS)
1996-03-01
This document has been prepared by the US Department of Energy's (DOE's) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT ampersand E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE's Operations Office and Energy Technology Centers
-
Technology Development and Innovation | Wind | NREL
Technology Development and Innovation Technology Development and Innovation Technology Development Technology Center (NWTC) supports efforts to reduce bird and bat fatalities at wind energy projects and photo of wind turbines at the National Wind Technology Center. Wildlife technology research and
-
Chater, Latif
2015-01-01
O emprego da tecnologia de estruturas mistas apresenta vantagens significativas para a indústria da construção civil, em relação ao comportamento estrutural, e também quanto a aspectos construtivos. Os conectores de cisalhamento desempenham papel fundamental na solidarização dos materiais, no caso deste desta pesquisa o aço e o concreto, e portanto na qualidade da ação conjunta dos mesmos. Neste trabalho é apresentado um conector de cisalhamento composto por barra de aço CA-50 dobrada em form...
-
Identifying and overcoming barriers to technology implementation
International Nuclear Information System (INIS)
Bailey, M.; Warren, S.; McCune, M.
1996-01-01
In a recent General Accounting Office report, the Department of Energy's (DOE) Office of Environmental Management was found to be ineffective in integrating their environmental technology development efforts with the cleanup actions. As a result of these findings, a study of remediation documents was performed by the Technology Applications Team within DOE's Office of Environmental Restoration (EM-40) to validate this finding and to understand why it was occurring. A second initiative built on the foundation of the remediation document study and evaluated solutions to the ineffective implementation of improved technologies. The Technology Applications Team examined over 50 remediation documents (17 projects) which included nearly 600 proposed remediation technologies. It was determined that very few technologies are reaching the Records of Decision documents. In fact, most are eliminated in the early stages of consideration. These observations stem from regulators' and stakeholders' uncertainties in cost and performance of the technology and the inability of the technology to meet site specific conditions. The Technology Applications Team also set out to identify and evaluate solutions to barriers to implementing innovative technology into the DOE's environmental management activities. Through the combined efforts of DOE and the Hazardous Waste Action Coalition (HWAC), a full day workshop was conducted at the annual HWAC meeting in June 1995 to solve barriers to innovative technology implementation. Three barriers were identified as widespread throughout the DOE complex and industry. Identified barriers included a lack of verified or certified cost and performance data for innovative technologies; risk of failure to reach cleanup goals using innovative technologies; and communication barriers that are present at virtually every stage of the characterization/remediation process from development through implementation
-
Directory of Open Access Journals (Sweden)
Edvaldo Cavalcante
2005-11-01
Full Text Available OBJETIVO: comparar os resultados de ciclos de reprodução assistida em mulheres doadoras de oócitos no ciclo de tratamento com o de mulheres não doadoras. MÉTODOS: foram avaliadas, retrospectivamente, as taxas de gravidez, implantação e abortamento de 50 pacientes que doaram oócitos durante o ciclo de reprodução assistida (grupo de doadoras e de 50 pacientes que não doaram oócitos (grupo de não-doadoras, em clínica privada de reprodução assistida em São Paulo, entre os anos de 2001 e 2003. Os critérios de inclusão no estudo foram os seguintes: idade menor que 35 anos; ciclos menstruais regulares; dosagem basal de FSH0,05. CONCLUSÃO: em pacientes que recuperam mais de seis oócitos, a doação de oócitos no ciclo de tratamento não prejudica os resultados dos ciclos de reprodução assistida e não eleva as taxas de abortamento.PURPOSE: to compare the outcome of treatment in patients undergoing assisted reproductive technology (ART cycles who donated eggs during their own ART treatment with the outcome of patients undergoing ART without egg donation. METHODS: we studied retrospectively the pregnancy and implantation rates of 50 patients who donated eggs during the course of their ART treatment (donor group, and the pregnancy and implantation rates of 50 patients who underwent ART cycles and kept all their eggs (non-donor group. between the years 2001-2003. The inclusion criteria used were as follows: age 0.05. CONCLUSION: this study suggests that in patients who produce more than 6 oocytes, egg donation in the treatment cycle does not influence adversely the outcome of ART cycles and does not increase the miscarriage rate.
-
IGCC based on proven technology developing towards 50% efficiency mark
Energy Technology Data Exchange (ETDEWEB)
Goudappel, E.; Berkhout, M. [Jacobs Consultancy, Leiden (Netherlands)
2006-07-01
In this paper the achievements made over the last 10 years in terms of reliability, load following and efficiency improvement potential at the Buggenum IGCC plant, are presented. Also the air side heat integration and its pros and cons are discussed. Additionally future business opportunities adjacent to the power production itself and the view on coal gasification in the near future are provided. The results are discussed and it is shown that with 'proven' gasifier and gas treatment technology, overall efficiency exceeding 47% (LHV basis) can be reached. It puts this technical potential in perspective and describes the view on interesting business opportunities around IGCC projects. 5 figs., 3 tabs.
-
Directory of Open Access Journals (Sweden)
Fábio Suano de Souza
2007-04-01
Full Text Available A utilização de adubos pode-se tornar prejudicial caso o fertilizante não seja localizado adequadamente. No presente trabalho foram estudados o crescimento radicular do algodoeiro (Gossypium hirsutum, o crescimento inicial e a nutrição da planta, considerando o local de aplicação do fertilizante. O estudo foi realizado em vasos com parede de vidro. O fertilizante foi colocado a 5,0 cm abaixo e 0,0, 2,5, 5,0 e 10,0 cm ao lado das sementes. O crescimento radicular foi avaliado a cada três dias e, aos 21 dias após a emergência, as plantas foram coletadas, sendo avaliada a produção de matéria seca e a absorção de macronutrientes. A aplicação de fertilizante proporcionou crescimento inicial mais vigoroso do sistema radicular mesmo em solo previamente corrigido e adubado, o que é importante no estabelecimento da cultura. Somente houve bom crescimento inicial do sistema radicular e da parte aérea do algodoeiro quando o fertilizante foi aplicado de 5,0 a 10,0 cm ao lado e 5,0 cm abaixo das sementes.Unless fertilizer is properly placed in the soil it can be harmful. This experiment was conducted to study cotton (Gossypium hirsutum root growth and initial plant development and nutrition as affected by fertilizer placement. Cotton plants were grown in pots with a glass wall. The fertilizer was applied 5.0 cm under the seed row and 0, 2.5, 5.0 and 10.0 cm beside the seed row. Root growth was evaluated every 3 days, and 21 days after emergence the plants were harvested. Dry matter production and macronutrient absorption were evaluated. Even in previously limed and fertilized soil, localized fertilizer application reinforced the initial growth of cotton roots, which is very important for a good crop establishment in the field. Normal root growth and adequate initial plant development was only observed when the fertilizer was placed 5.0 cm below and from 5.0 to 10.0 cm distance from the seed row.
-
Energy, technology, development
Energy Technology Data Exchange (ETDEWEB)
Goldemberg, J [Ministerio da Educacao, Brasilia (Brazil)
1992-02-01
Energy and technology are essential ingredients of development, it is only through their use that it became possible to sustain a population of almost 5 billion on Earth. The challenges to eradicate poverty and underdevelopment in developing countries in the face of strong population increases can only be successfully met with the use of advanced technology, leapfrogging the path followed in the past by today's industrialized countries. It is shown in the paper that energy consumption can be decoupled from economic development. Such possibility will contribute significantly in achieving sustainable development. 10 refs., 4 figs., 3 tabs.
-
Contaminant plumes containment and remediation focus area. Technology summary
International Nuclear Information System (INIS)
1995-06-01
EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs
-
Contaminant plumes containment and remediation focus area. Technology summary
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-06-01
EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs.
-
Technology developments for a compound cycle engine
Bobula, George A.; Wintucky, William T.; Castor, J. G.
1988-01-01
The Compound Cycle Engine (CCE) is a highly turbocharged, power compounded power plant which combines the light weight pressure rise capability of a gas turbine with the high efficiency of a diesel. When optimized for a rotorcraft, the CCE will reduce fuel burned for a typical 2 hour (plus 30 min reserve) mission by 30 to 40 percent when compared to a conventional advanced technology gas turbine. The CCE can provide a 50 percent increase in range-payload product on this mission. Results of recent activities in a program to establish the technology base for a CCE are presented. The objective of this program is to research and develop those critical technologies which are necessary for the demonstration of a multicylinder diesel core in the early 1990s. A major accomplishment was the initial screening and identification of a lubricant which has potential for meeting the material wear rate limits of the application. An in-situ wear measurement system also was developed to provide accurate, readily obtainable, real time measurements of ring and liner wear. Wear data, from early single cylinder engine tests, are presented to show correlation of the in-situ measurements and the system's utility in determining parametric wear trends. A plan to demonstrate a compound cycle engine by the mid 1990s is included.
-
Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)
International Nuclear Information System (INIS)
Moe, Wayne Leland
2015-01-01
This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a ''critical path'' for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain ''minimum'' levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial ''first step'' in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by
-
Energy Technology Data Exchange (ETDEWEB)
Choi, Chang Beom; Kim, Hyeong Soo; Kim, Sang Won; Seok, Ho Cheon; Shim, Ki Seop; Byeon, Taek Sang; Jang, Ho Il; Kim, Sang Sik; Choi, Il Kwon; Cho, Dae Sik; Sheo, Seung Won; Lee, Soo Cheol; Kim, Yoon Hoi; Park, Choon Ho; Jeong, Seong Hoon; Kang, Myeong Soo; Park, Kwang Seok; Oh, Hee Kwan; Jang, Hong Seop; Kim, Yang Kon; Shin, Won Cheol; Lee, Do Yeon; Beon, Yeong Cheol; Lee, Sang Uh; Sho, Dal Yeong; Han, Eun Deok; Kim, Bong Soon; Park, Cheol Joo; Lee, Kyu Am; Yeon, Jin Yeong; Choi, Seok Mo; Shon, Jae Moon [Korea Atomic Energy Res. Inst., Taejon (Korea, Republic of)
1994-07-01
The present study is to develop the advanced CANDU fuel fabrication technologies by means of applying the R and D results and experiences gained from localization of mass production technologies of CANDU fuels. The annual portion of this year study includes following: 1. manufacturing of demo-fuel bundles for out-of-pile testing 2. development of technologies for the fabrication and inspection of advanced fuels 3. design and munufacturing of fuel fabrication facilities 4. performance of fundamental studies related to the development of advanced fuel fabrication technology.
-
Ricor's anniversary of 50 innovative years in cryogenic technology
Filis, Avishai; Segal, Victor; Pundak, Nachman; Bar Haim, Zvi; Danziger, Menachem
2017-05-01
Ricor cryogenics was founded in 1967 and since then it has focused on innovative technologies in the cryogenic field. The paper reviews the initial research and development efforts invested in various technologies that have yielded products such as Cryostats for Mossbauer Effect measurement, Liquid gas Dewar containers, Liquid helium vacuum transfer tubes, Cryosurgery and other innovative products. The major registered patents that matured to products such as a magnetic vacuum valve operator, pumped out safety valve and other innovations are reviewed here. As a result of continuous R and D investment, over the years a new generation of innovative Stirling cryogenic products has developed. This development began with massive split slip-on coolers and has progressed as far as miniature IDDCA coolers mainly for IR applications. The accumulated experience in Stirling technology is used also as a platform for developing self-contained water vapor pumps known as MicroStar and NanoStar. These products are also used in collaboration with a research institute in the field of High Temperature Superconductors. The continuous growth in the cryogenic products range and the need to meet market demands have motivated the expansion, of Ricor's manufacturing facility enabling it to become a world leader in the cryocooler field. To date Ricor has manufactured more than 120,000 cryocoolers. The actual cryogenic development efforts and challenges are also reviewed, mainly in the field of long life cryocoolers, ruggedized products, miniaturization and products for space applications.
-
Progress in the Development of the Lead Tungstate Crystals for EM-Calorimetry in High-Energy Physics
Novotny, R. W.; Brinkmann, K.-T.; Borisevich, A.; Dormenev, V.; Houzvicka, J.; Korjik, M.; Zaunick, H.-G.
2017-11-01
Even at present time there is a strong interest and demand for high quality lead tungstate crystals (PbWO4, PWO) for electromagnetic (EM) calorimetry. PWO is implemented into the EM calorimeter of the CMS-ECAL detector at LHC [1] and required for the completion of the PANDA EMC [2] and various ongoing detector projects at Jefferson Lab. The successful mass production of PWO using the Czochralski method was stopped after bankruptcy of the Bogoroditsk Technical Chemical Plant (BTCP) in Russia as major producer so far. The Shanghai Institute of Ceramics, Chinese Academy of Science (China) was considered as an alternative producer using the modified Bridgman method. The company CRYTUR (Turnov, Czech Republic) with good experience in the development and production of different types of inorganic oxide crystals has restarted at the end of 2014 the development of lead tungstate for mass production based on the Czochralski method. An impressive progress was achieved since then. The growing technology was optimized to produce full size samples with the quality meeting the PANDA-EMC specifications for PWO-II. We will present a detailed progress report on the research program in collaboration with groups at Orsay and JLab. The full size crystals will be characterized with respect to optical performance, light yield, kinetics and radiation hardness.
-
Directory of Open Access Journals (Sweden)
José Américo Bonatti
2008-04-01
Full Text Available PURPOSE: To develop in an interdisciplinary approach between ophthalmology and design areas an ergonomic +22-diopter 50-mm aspheric hand magnifier for low vision. METHODS: An aluminum cylinder was cut, processed using a lathe and carved to produce a ring that accommodated a 50-mm aspheric lens, with an external depression not to slide from the holder's fingers. A cylindrical steel bar was cut, processed using a lathe and carved in order to form an externally turned ring to be screwed into the internal thread of the aluminum ring, to maintain the lens in a steady position. Both rings were submitted to electrostatic painting with a dull black electrostatic Epoxi ink, except the lower border of the external ring, to indicate the correct side of the magnifier to face the material to be read. RESULTS: A 22-diopter 50-mm diameter aspheric lens magnifier with a black ring to be hold at its external circular depression was obtained in order to safely search the adequate reading focus with an inferior aluminum colored ring to face the object to be read and allow a less distorted reading. This is the first Brazilian high-magnification great-diameter magnifier for low vision that permits basically the focusing on an entire word, not only syllables, in order to allow a faster and more comfortable reading. CONCLUSIONS: By an interdisciplinary approach a 22-diopter 50-mm aspheric lens magnifier was developed with image and ergonomic characteristics such as to permit comfortable and adequate reading performance in cases of low vision.OBJETIVO: Desenvolver de modo interdisciplinar entre as áreas de oftalmologia e design uma lupa de mão ergonômica de +22 dioptrias de 50 mm de diâmetro asférica para baixa visão. MÉTODOS: Um cilindro de alumínio foi cortado, torneado e teve feita internamente uma rosca a fim de produzir um anel para acomodar uma lente asférica de 50 mm de diâmetro com uma depressão externa para não escorregar dos dedos do portador. Uma
-
High performance fuel technology development
Energy Technology Data Exchange (ETDEWEB)
Koon, Yang Hyun; Kim, Keon Sik; Park, Jeong Yong; Yang, Yong Sik; In, Wang Kee; Kim, Hyung Kyu [KAERI, Daejeon (Korea, Republic of)
2012-01-15
{omicron} Development of High Plasticity and Annular Pellet - Development of strong candidates of ultra high burn-up fuel pellets for a PCI remedy - Development of fabrication technology of annular fuel pellet {omicron} Development of High Performance Cladding Materials - Irradiation test of HANA claddings in Halden research reactor and the evaluation of the in-pile performance - Development of the final candidates for the next generation cladding materials. - Development of the manufacturing technology for the dual-cooled fuel cladding tubes. {omicron} Irradiated Fuel Performance Evaluation Technology Development - Development of performance analysis code system for the dual-cooled fuel - Development of fuel performance-proving technology {omicron} Feasibility Studies on Dual-Cooled Annular Fuel Core - Analysis on the property of a reactor core with dual-cooled fuel - Feasibility evaluation on the dual-cooled fuel core {omicron} Development of Design Technology for Dual-Cooled Fuel Structure - Definition of technical issues and invention of concept for dual-cooled fuel structure - Basic design and development of main structure components for dual- cooled fuel - Basic design of a dual-cooled fuel rod.
-
Mobilizing technology for developing countries
Energy Technology Data Exchange (ETDEWEB)
Weiss, C Jr
1979-10-01
Mr. Weiss says that the 15 years since the UN Conference on Science, Technology, and Development in Geneva have taught us that what seem at first to be technological obstacles to development frequently turn out on closer examination to have been policy failures; that introduction of technologies into developing countries must be accompanied by institutional and policy changes if the technologies are to benefit the countries. He points out that choice of alternative technology for a developing country should depend on careful overall assessment of local techno-economic, geographical, ecological, and social factors, as well as the desired balance between growth and equity. Such a technology assessment, a key element in the choice of appropriate (i.e., locally suitable) technology for particular investment projects, should be built into procedures for project preparation and appraisal in governments and development assistance agencies. Turning to technologists, Mr. Weiss says they face a double challenge: (1) to recognize potential for new efforts to harness science and technology for the benefit of the developing countries; and (2) by understanding the social, institutional, and economic framework into which an innovation is to operate, to ease its application and diffusion, and thus speed and increase its practical impact. 25 references.
-
An EM System with Dynamic Multi-Axis Transmitter and Tensor Gradiometer Receiver
2011-06-01
main difference between the spatial behavior of target anomalies measured with a magnetometer and those we measured with an EM system is in the nature...environmental and UXO applications, current efforts include the development of tensor magnetic gradiometers based on triaxial fluxgate technology by the USGS...Superconducting gradiometer/ Magnetometer Arrays and a Novel Signal Processing Technique. IEEE Trans. on Magnetics, MAG-11(2), 701-707. EM Tensor
-
Abney, Morgan; Barta, Daniel
2015-01-01
The Next Generation Life Support Spacecraft Oxygen Recovery (SCOR) project element is dedicated to developing technology that enables oxygen recovery from metabolically produced carbon dioxide in space habitats. The state-of-the-art system on the International Space Station uses Sabatier technology to recover (is) approximately 50% oxygen from carbon dioxide. The remaining oxygen required for crew respiration is supplied from Earth. For long duration manned missions beyond low-Earth orbit, resupply of oxygen becomes economically and logistically prohibitive. To mitigate these challenges, the SCOR project element is targeting development of technology to increase the recovery of oxygen to 75% or more, thereby reducing the total oxygen resupply required for future missions.
-
Development of Coated Particle Fuel Technology
International Nuclear Information System (INIS)
Lee, Young Woo; Kim, B. G.; Kim, S. H.
2007-06-01
Uranium kernel fabrication technology using a wet chemical so-gel method, a key technology in the coated particle fuel area, is established up to the calcination step and the first sintering of UO2 kernel was attempted. Experiments on the parametric study of the coating process using the surrogate ZrO2 kernel give the optimum conditions for the PyC and SiC coating layer and ZrC coating conditions were obtained for the vaporization of the ZrCl4 precursor and coating condition from ZrC coating experiments using plate-type graphite substrate. In addition, by development of fuel performance analysis code a part of the code system is completed which enables the participation to the benchmark calculation and comparison in the IAEA collaborated research program. The technologies for irradiation and post irradiation examination, which are important in developing the HTGR fuel technology of its first kind in Korea was started to develop and, through a feasibility study and preliminary analysis, the technologies required to be developed are identified for further development as well as the QC-related basic technologies are reviewed, analyzed and identified for the own technology development. Development of kernel fabrication technology can be enhanced for the remaining sintering technology and completed based on the technologies developed in this phase. In the coating technology, the optimum conditions obtained using a surrogate ZrO2 kernel material can be applied for the uranium kernel coating process development. Also, after completion of the code development in the next phase, more extended participation to the international collaboration for benchmark calculation can be anticipated which will enable an improvement of the whole code system. Technology development started in this phase will be more extended and further focused on the detailed technology development to be required for the related technology establishment
-
Directory of Open Access Journals (Sweden)
Ana Paula Avellar
2009-09-01
Full Text Available A política tecnológica representa, na atualidade, parte central da agenda econômica nos países desenvolvidos e nos países emergentes. O trabalho pretende realizar um exercício empírico de avaliação de impacto de programas de incentivos fiscais e incentivos financeiros do Brasil, na realização de atividades inovativas e de atividades de P&D das empresas, quais sejam: um programa de incentivo fiscal, o Programa de Desenvolvimento Tecnológico Industrial (PDTI; um programa de incentivo financeiro reembolsável, o Programa de Apoio ao Desenvolvimento Tecnológico da Empresa Nacional (ADTEN e um programa de incentivo financeiro não reembolsável, o Fundo Nacional de Desenvolvimento Científico e Tecnológico (FNDCT Cooperativo. Para capturar os efeitos no comportamento das empresas beneficiárias em relação às não beneficiárias será aplicado o método Propensity Score Matching. O estudo conclui que os programas estimularam os gastos em atividades inovativas e em atividades de P&D das empresas beneficiárias.Technology policies have been part of economical agenda in the developed countries as well as in the periphery. The generalized use of these incentives has culminated in a large international discussion questioning its effective capacity to stimulate (or not the benefited companies. This work intends to develop an evaluating empirical exercise of three Brazilian programs of tax incentives and financial incentives to technological activities: Industrial Technological Developing Program (PDTI, National Fund for Scientific and Technological Development (FNDCT and the Support Program for Technological Development of National Companies (ADTEN. In order to capture the effects of these programs on the behavior of benefited companies in relation to those which were not benefited, concerning the decision of expenses in technological activities and to innovative effort, an econometric method will be applied the Propensity Score Matching
-
International Nuclear Information System (INIS)
Ebadian, M.A.
1998-01-01
In 1989, the US Department of Energy (DOE) established the Office of Environmental Management (EM) and delegated to the office the responsibility of cleaning up the US nuclear weapons complex. EM's mission has three primary activities: (1) to assess, remediate, and monitor contaminated sites and facilities; (2) to store, treat, and dispose of wastes from past and current operations; and (3) to develop and implement innovative technologies for environmental remediation. To this end, EM has established domestic and international cooperative technology development programs, including one with the Republic of Argentina. Cooperating with Argentine scientific institutes and industry meets US cleanup objectives by: (1) identifying and accessing Argentine EM-related technologies, thereby leveraging investments and providing cost-savings; (2) improving access to technical information, scientific expertise, and technologies applicable to EM needs; and (3) fostering the development of innovative environmental technologies by increasing US private sector opportunities in Argentina in EM-related areas. Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) serves as DOE-OST's primary technology transfer agent. FIU-HCET acts as the coordinating and managing body for the Department of Energy (DOE)-Argentina National Atomic Energy Commission (CNEA) Arrangement. Activities include implementing standard operating procedures, tracking various technical projects, hosting visiting scientists, advising DOE of potential joint projects based on previous studies, and demonstrating/transferring desired technology. HCET hosts and directs the annual Joint Coordinating Committee for Radioactive and Mixed Waste Management meeting between the DOE and CNEA representatives. Additionally, HCET is evaluating the possibility of establishing similar arrangements with other Latin American countries
-
Mars Technology Program: Planetary Protection Technology Development
Lin, Ying
2006-01-01
This slide presentation reviews the development of Planetary Protection Technology in the Mars Technology Program. The goal of the program is to develop technologies that will enable NASA to build, launch, and operate a mission that has subsystems with different Planetary Protection (PP) classifications, specifically for operating a Category IVb-equivalent subsystem from a Category IVa platform. The IVa category of planetary protection requires bioburden reduction (i.e., no sterilization is required) The IVb category in addition to IVa requirements: (i.e., terminal sterilization of spacecraft is required). The differences between the categories are further reviewed.
-
Directory of Open Access Journals (Sweden)
Conxita Avila
2012-08-01
Full Text Available Ascidians have developed multiple defensive strategies mostly related to physical, nutritional or chemical properties of the tunic. One of such is chemical defense based on secondary metabolites. We analyzed a series of colonial Antarctic ascidians from deep-water collections belonging to the genera <em>Aplidium> and <em>Synoicum> to evaluate the incidence of organic deterrents and their variability. The ether fractions from 15 samples including specimens of the species <em>A.> <em>falklandicum>, <em>A.> <em>fuegiense>, <em>A.> <em>meridianum>, <em>A.> <em>millari> and <em>S.> <em>adareanum> were subjected to feeding assays towards two relevant sympatric predators: the starfish <em>Odontaster> <em>validus>, and the amphipod <em>Cheirimedon> <em>femoratus>. All samples revealed repellency. Nonetheless, some colonies concentrated defensive chemicals in internal body-regions rather than in the tunic. Four ascidian-derived meroterpenoids, rossinones B and the three derivatives 2,3-epoxy-rossinone B, 3-epi-rossinone B, 5,6-epoxy-rossinone B, and the indole alkaloids meridianins A–G, along with other minoritary meridianin compounds were isolated from several samples. Some purified metabolites were tested in feeding assays exhibiting potent unpalatabilities, thus revealing their role in predation avoidance. Ascidian extracts and purified compound-fractions were further assessed in antibacterial tests against a marine Antarctic bacterium. Only the meridianins showed inhibition activity, demonstrating a multifunctional defensive role. According to their occurrence in nature and within our colonial specimens, the possible origin of both types of metabolites is discussed.
-
Fast breeder reactor fuel reprocessing R and D: technological development for a commercial plant
International Nuclear Information System (INIS)
Colas, J.; Saudray, D.; Coste, J.A.; Roux, J.P.; Jouan, A.
1987-01-01
The technological developments undertaken by the CEA are applied to a plant project of a 50 t/y capacity, having to reprocess in particular the SUPERPHENIX 1 reactor fuel. French experience on fast breeder reactor fuel reprocessing is presented, then the 50 t/y capacity plant project and the research and development installations. The R and D programs are described, concerning: head-end operations, solvent extractions, Pu02 conversion and storage, out-of-specification Pu02 redissolution, fission products solution vitrification, conditioning of stainless steel hulls by melting, development of remote operation equipments, study of corrosion and analytical problems
-
<em>In Vivoem> Histamine Optical Nanosensors
Directory of Open Access Journals (Sweden)
Heather A. Clark
2012-08-01
Full Text Available In this communication we discuss the development of ionophore based nanosensors for the detection and monitoring of histamine levels <em>in vivoem>. This approach is based on the use of an amine-reactive, broad spectrum ionophore which is capable of recognizing and binding to histamine. We pair this ionophore with our already established nanosensor platform, and demonstrate <em>in vitroem> and <em>in vivoem> monitoring of histamine levels. This approach enables capturing rapid kinetics of histamine after injection, which are more difficult to measure with standard approaches such as blood sampling, especially on small research models. The coupling together of <em>in vivoem> nanosensors with ionophores such as nonactin provide a way to generate nanosensors for novel targets without the difficult process of designing and synthesizing novel ionophores.
-
Advanced remediation, technology development in the underground storage tank
International Nuclear Information System (INIS)
Gates, T.E.; Gilchrist, R.L.
1992-01-01
Production of nuclear materials has been a major mission of the U. S. Department of Energy (DOE) over the last 50 years. These activities have contributed to a substantial accumulation of hazardous, radioactive, and mixed wastes. In 1989, the DOE established the Office of Environmental Restoration and Waste Management. This office coordinates and manages the DOE's remediation, waste minimization, and environmental compliance activities. It also has responsibility for waste generated by current operations. Within this office is the Office of Technology Development, which is responsible for providing technology improvements. This paper reports on integrated demonstrations which have been established to efficiently bring the best technologies to bear on the common needs of multiple DOE sites. One such need is resolution of the actions required for final closure and waste disposal of liquid (including sludge and salt cake) radioactive and chemical wastes that have been transferred to underground storage tanks
-
International Nuclear Information System (INIS)
Hutter, A.; Weeks, S.
2001-01-01
The mission of the U.S. Department of Energy Office of Environmental Management (EM) is to clean up its contaminated sites from the past production of nuclear weapons. Within EM, the Office of Science and Technology (OST) is responsible for providing a full range of science and technology resources needed to support resolution of EM cleanup and long-term environmental stewardship problems. This responsibility includes implementation of a technology development pathway from basic research to development, demonstration, and deployment of scientific and technological solutions needed by DOE sites. One OST Program is the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP), which aims to provide innovative technologies (i.e., faster, better, cheaper, and/or safer) for environmental characterization and monitoring. Several technologies are described that CMST-CP has supported for development with significant benefits realized or projected over the baseline characterization and monitoring practices. Examples of these technologies include mapping of subsurface radioactivity using Cone Penetrometer and drilling techniques; a Rapid Liquid Sampler for Sr, Ra, Tc, and Cs using 3M Empore TM Rad Disks; Long-Range Alpha Detectors; a Compact High Resolution Spectrometer; BetaScint TM for determination of Sr in soil; Laser-Induced Fluorescence Imaging techniques for mapping U on surfaces; the Environmental Measurements While Drilling System; and the Expedited Site Characterization methodology. (author)
-
Development of Radioisotope Tracer Technology
International Nuclear Information System (INIS)
Jung, Sung Hee; Jin, Joon Ha; Kim, Jong Bum; Kim, Jin Seop; Kim, Jae Jo; Park, Soon Chul; Lim, Don Soon; Choi, Byung Jong; Jang, Dong Soon; Kim, Hye Sook
2007-06-01
The project is aimed to develop the radiotracer technology for process optimization and trouble-shooting to establish the environmental and industrial application of radiation and radioisotopes. The advanced equipment and software such as high speed data acquisition system, RTD model and high pressure injection tool have developed. Based on the various field application to the refinery/petrochemical industries, the developed technology was transfer to NDT company for commercial service. For the environmental application of radiotracer technology, injector, detector sled, core sampler, RI and GPS data logging system are developed and field tests were implemented successfully at Wolsung and Haeundae beach. Additionally tracer technology were also used for the performance test of the clarifier in a wastewater treatment plant and for the leak detection in reservoirs. From the experience of case studies on radiotracer experiment in waste water treatment facilities, 'The New Excellent Technology' is granted from the ministry of environment. For future technology, preliminary research for industrial gamma transmission and emission tomography which are new technology combined with radioisotope and image reconstruction are carried out
-
Directory of Open Access Journals (Sweden)
Karla Davantel de Barros
2011-01-01
Full Text Available A população idosa vem aumentando consideravelmente nas ultimas décadas. Esta etapa da vida é marcada principalmente pela perda da autonomia em suas capacidades funcionais. A perda da força é considerada um fator relevante no processo de envelhecimento. Um programa de AF voltada a saúde pode melhorar a força, aumentar a massa muscular, a flexibilidade e maior autonomia nas atividades da vida diária (AVD’s em indivíduos mais velhos. O objetivo desseestudo é analisar a influência de um programa de AF relacionada a saúde nas variáveis: Atividades da Vida Diária, composição corporal e flexibilidade, durante dez meses, em oito mulheres acima de 50 anos. Para tanto, foram feitas avaliações antes do início e após o término do programa. Os dados foram tratados através do pacote estatístico SPSS 13 for Windows. Utilizou-se dos recursos da estatística descritiva para análise dos dados com nível de significância de 95%. Os exercícios propostos foram: leg-press, supino articulado reto, remada sentada, panturrilha, tríceps polia, cadeira extensora, rosca com halteres, cadeira abdutora e adutora. Os resultados obtidos nos testes de Atividades da Vida Diária foram significativos, corroborando a hipótese de que programas para o desenvolvimento de força podem ser eficazes na melhoria de aspectos da vida diária demulheres idosas, colaborando para a manutenção e prolongamento da autonomia das capacidades funcionais deste grupo.The senior population is increasing considerably in the last decades.This stage of life is marked mainly by the loss of autonomy on its functional capacities. The loss of the strength is considered a relevant factor on the aging process. A weight training programcan improve strength and increase the muscle mass in older individuals. The purpose of this study was to analyze the influence of a program of AF on health-related variables: Activities of Daily Living, body composition and flexibility, for ten
-
Technology transfer and international development: Materials and manufacturing technology
1982-01-01
Policy oriented studies on technological development in several relatively advanced developing countries were conducted. Priority sectors defined in terms of technological sophistication, capital intensity, value added, and export potential were studied in Brazil, Venezuela, Israel, and Korea. The development of technological policy alternatives for the sponsoring country is assessed. Much emphasis is placed on understanding the dynamics of the sectors through structured interviews with a large sample of firms in the leading manufacturing and materials processing sectors.
-
Publications | Page 50 | IDRC - International Development Research ...
International Development Research Centre (IDRC) Digital Library (Canada)
Results 491 - 500 of 6341 ... Through books, articles, research publications, and studies, we aim to widen the impact of our investment and advance development research. ... Does the unequal distribution of technological resources and available data sets threaten the developing world's participation in the open data ...
-
Development of superconductor electronics technology for high-end computing
Energy Technology Data Exchange (ETDEWEB)
Silver, A [Jet Propulsion Laboratory, 4800 Oak Grove Drive, Pasadena, CA 91109-8099 (United States); Kleinsasser, A [Jet Propulsion Laboratory, 4800 Oak Grove Drive, Pasadena, CA 91109-8099 (United States); Kerber, G [Northrop Grumman Space Technology, One Space Park, Redondo Beach, CA 90278 (United States); Herr, Q [Northrop Grumman Space Technology, One Space Park, Redondo Beach, CA 90278 (United States); Dorojevets, M [Department of Electrical and Computer Engineering, SUNY-Stony Brook, NY 11794-2350 (United States); Bunyk, P [Northrop Grumman Space Technology, One Space Park, Redondo Beach, CA 90278 (United States); Abelson, L [Northrop Grumman Space Technology, One Space Park, Redondo Beach, CA 90278 (United States)
2003-12-01
This paper describes our programme to develop and demonstrate ultra-high performance single flux quantum (SFQ) VLSI technology that will enable superconducting digital processors for petaFLOPS-scale computing. In the hybrid technology, multi-threaded architecture, the computational engine to power a petaFLOPS machine at affordable power will consist of 4096 SFQ multi-chip processors, with 50 to 100 GHz clock frequency and associated cryogenic RAM. We present the superconducting technology requirements, progress to date and our plan to meet these requirements. We improved SFQ Nb VLSI by two generations, to a 8 kA cm{sup -2}, 1.25 {mu}m junction process, incorporated new CAD tools into our methodology, demonstrated methods for recycling the bias current and data communication at speeds up to 60 Gb s{sup -1}, both on and between chips through passive transmission lines. FLUX-1 is the most ambitious project implemented in SFQ technology to date, a prototype general-purpose 8 bit microprocessor chip. We are testing the FLUX-1 chip (5K gates, 20 GHz clock) and designing a 32 bit floating-point SFQ multiplier with vector-register memory. We report correct operation of the complete stripline-connected gate library with large bias margins, as well as several larger functional units used in FLUX-1. The next stage will be an SFQ multi-processor machine. Important challenges include further reducing chip supply current and on-chip power dissipation, developing at least 64 kbit, sub-nanosecond cryogenic RAM chips, developing thermally and electrically efficient high data rate cryogenic-to-ambient input/output technology and improving Nb VLSI to increase gate density.
-
Development of superconductor electronics technology for high-end computing
International Nuclear Information System (INIS)
Silver, A; Kleinsasser, A; Kerber, G; Herr, Q; Dorojevets, M; Bunyk, P; Abelson, L
2003-01-01
This paper describes our programme to develop and demonstrate ultra-high performance single flux quantum (SFQ) VLSI technology that will enable superconducting digital processors for petaFLOPS-scale computing. In the hybrid technology, multi-threaded architecture, the computational engine to power a petaFLOPS machine at affordable power will consist of 4096 SFQ multi-chip processors, with 50 to 100 GHz clock frequency and associated cryogenic RAM. We present the superconducting technology requirements, progress to date and our plan to meet these requirements. We improved SFQ Nb VLSI by two generations, to a 8 kA cm -2 , 1.25 μm junction process, incorporated new CAD tools into our methodology, demonstrated methods for recycling the bias current and data communication at speeds up to 60 Gb s -1 , both on and between chips through passive transmission lines. FLUX-1 is the most ambitious project implemented in SFQ technology to date, a prototype general-purpose 8 bit microprocessor chip. We are testing the FLUX-1 chip (5K gates, 20 GHz clock) and designing a 32 bit floating-point SFQ multiplier with vector-register memory. We report correct operation of the complete stripline-connected gate library with large bias margins, as well as several larger functional units used in FLUX-1. The next stage will be an SFQ multi-processor machine. Important challenges include further reducing chip supply current and on-chip power dissipation, developing at least 64 kbit, sub-nanosecond cryogenic RAM chips, developing thermally and electrically efficient high data rate cryogenic-to-ambient input/output technology and improving Nb VLSI to increase gate density
-
Coherent Architecture Development as a Basis for Technology Development
DEFF Research Database (Denmark)
Ravn, Poul Martin
coherent architectures in a technology context as a basis for identification of critical development areas, this research has been focused around the following three areas: 1. Product architecture instances for prototypes testing novel technology. 2. Product architecture definition for a sub-system based......The subject of this PhD thesis is architecture-centered design. It elaborates especially on two specific areas: the coherence in architectures in a technology development context and the identification of critical development areas via property-based reasoning, based on an understanding of cette...... coherence. Despite the acceptance and results presented in multiple studies from the application of architectures, the research on architecture work in a technology development context is limited. Technologies are often developed and represented in the form of product sub-systems that are made available...
-
Directory of Open Access Journals (Sweden)
Maurício Paulo Ferreira Fontes
2011-04-01
Full Text Available
Nutrientes preservados em microagregados podem constituir reserva importante em solos altamente intemperizados. Com o objetivo de melhor compreender a distribuição de nutrientes em microagregados contidos em frações granulométricas de 200-50 <em>u>m e 50-20 <em>u>m, de um Latossolo Vermelho distrófico típico, utilizou-se um procedimento de fracionamento físico, adaptado para o objetivo deste estudo, em conjunto com análises químicas e mineralógicas. Parte destas frações foi caracterizada como microagregados constituídos por minerais da fração argila e silte, com altos teores de macro e micronutrientes. P, Cu, Mn e Zn foram mais eficientemente acumulados nos microagregados e menos susceptíveis à remoção, pela ação do intemperismo e lixiviação, em comparação ao K e Mg. Maiores teores de C foram encontrados nos microagregados de 50-20 <em>u>m do horizonte superficial, devido à proteção física mais eficiente contra a mineralização. Os estoques de macro e micronutrientes (teores totais, nos microagregados (200-50 <em>u>m e 50-20 <em>u>m, corresponderam a 5-19% do total de nutrientes no solo, e 24-26% do total de carbono do solo esteve sequestrado nestes microagregados. Apesar da baixa capacidade de reserva destes microagregados, eles tornam-se um compartimento de alta estabilidade, com maior eficiência na função de preservar os nutrientes, frente à degradação física e ao intemperismo e lixiviação.
Nutrients preserved in microaggregates are an important fraction of the pool of nutrients in
PALAVRAS-CHAVE: Agregados do solo; fracionamento físico; macronutrientes; micronutrientes; estoque de matéria orgânica. -
AVALIAÇÃO DA ADIÇÃO DO KEFIR EM DIETA HOSPITALAR
Directory of Open Access Journals (Sweden)
Joice de Fátima Laureano Martins
2012-06-01
Full Text Available Os grãos de kefir são utilizados na elaboração de um produto lácteo fermentado o qual denominamos kefir. Sua introdução em dietas hospitalares promove vários benefícios aos pacientes e possui grande capacidade de estimular o sistema imunológico. Objetivou-se verificar a aceitação de diferentes formulações tendo como ingrediente o kefir. Os grãos de kefir (5 % foram cultivados por 24 horas à temperatura de 22º C. Em seguida, foram preparadas quatro formulações. Formulação 1 - 50 % de kefir cultivado em leite de vaca integral com 50 % de polpa de morango e adoçante (0,2 mL/100 mL; formulação 2 - 50 % de kefir cultivado em leite de vaca desnatado com 50 % de polpa de morango e adoçante (0,2 mL/100 mL; formulação 3 - 50 % de kefir cultivado em leite de vaca integral com 50 % de polpa de morango e 10 % de sacarose e formulação 4 - 50 % de kefir cultivado em leite de vaca desnatado com 50 % de polpa de morango e 10 % de sacarose. A análise sensorial foi realizada em um hospital do município de Viçosa-MG, tendo como provadores acompanhantes de pacientes internados e funcionários. Verificou-se a aceitação das formulações e utilizouse a escala hedônica de nove pontos. Todas as formulações apresentaram considerável aceitação enquadrando-se com maior frequência entre os escores «gostei moderadamente» a «gostei muito». Estes formulados apresentaram grande potencial para serem introduzidos em dietoterapia e poderão atuar tanto como adjunto ao tratamento de patologias gastrintestinais, como no controle glicêmico e hipercolesterolêmico.
-
Technology development and applications at Fernald
International Nuclear Information System (INIS)
Pettit, P.J.; Skriba, M.C.; Warner, R.D.
1995-01-01
At the Fernald Environmental Management Project (FEMP) northwest of Cincinnati, Ohio, the U.S. Department of Energy and contractor Fernald Environmental Restoration Management Corporation (FERMCO) are aggressively pursuing both the development and the application of improved, innovative technology to the environmental restoration task. Application of emerging technologies is particularly challenging in a regulatory environment that places pressure on operational managers to develop and meet tight schedules. The regulatory and operational needs make close communication essential between technology developers and technology users (CERCLA/RCRA Unit managers). At Fernald this cooperation and communication has led, not only to the development and demonstration of new technologies with applications at other sites, but also to application of new technologies directly to the Fernald clean up. New technologies have been applied to improve environmental safety and health, improve the effectiveness of restoration efforts, and to cut restoration costs. The paper will describe successful efforts to develop and apply new technologies at the FEMP and will emphasize those technologies that have been applied and are planned for use in the clean up of this former uranium production facility
-
National Nuclear Technology Map Development
International Nuclear Information System (INIS)
Shin, J. I.; Lee, T. J.; Yoon, S. W.
2005-03-01
The objective of NuTRM is to prepare a plan of nuclear R and D and technological innovations which is very likely to make nuclear technology a promising power source for future national developments. The NuTRM finds out systematically the nuclear R and D vision and the high-value-added strategic technologies to be developed by the efficient cooperation of actors including government, industry, academy and research institute by 2020. In other words, NuTRM aims at a long-term strategic planning of nuclear R and D and technological innovation in order to promote the socio-economic contributions of nuclear science and technology for the nation's future competitiveness and sustainable development and to raise the global status of the Korean nuclear R and D and Industry
-
Technological development in fisheries management
DEFF Research Database (Denmark)
Eigaard, Ole Ritzau; Marchal, Paul; Gislason, Henrik
2014-01-01
Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism...... referred to as “technological creep.” We review how the introduction of new and more efficient electronic equipment, gear design, engines, deck equipment, and catch-handling procedures influences the capture efficiency (catchability) of commercial fishing vessels. On average, we estimate that catchability...... increases by 3.2% per year due to technological developments, an increase often ignored in fisheries management. The documentation and quantification of technological creep improves the basis for successfully integrating the effects of technological development (and catchability changes) in fisheries...
-
Characterization monitoring & sensor technology crosscutting program
Energy Technology Data Exchange (ETDEWEB)
NONE
1996-08-01
The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the OFfice of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60).
-
River Protection Project Technology and Innovation Roadmap.
Energy Technology Data Exchange (ETDEWEB)
Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)
2017-08-14
The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.
-
Habitats and Surface Construction Technology and Development Roadmap
Cohen, Marc; Kennedy, Kriss J.
1997-01-01
The vision of the technology and development teams at NASA Ames and Johnson Research Centers is to provide the capability for automated delivery and emplacement of habitats and surface facilities. The benefits of the program are as follows: Composites and Inflatables: 30-50% (goal) lighter than Al Hard Structures; Capability for Increased Habitable Volume, Launch Efficiency; Long Term Growth Potential; and Supports initiation of commercial and industrial expansion. Key Habitats and Surface Construction (H&SC) technology issues are: Habitat Shell Structural Materials; Seals and Mechanisms; Construction and Assembly: Automated Pro-Deploy Construction Systems; ISRU Soil/Construction Equipment: Lightweight and Lower Power Needs; Radiation Protection (Health and Human Performance Tech.); Life Support System (Regenerative Life Support System Tech.); Human Physiology of Long Duration Space Flight (Health and Human Performance Tech.); and Human Psychology of Long Duration Space Flight (Health and Human Performance Tech.) What is being done regarding these issues?: Use of composite materials for X-38 CRV, RLV, etc.; TransHAB inflatable habitat design/development; Japanese corporations working on ISRU-derived construction processes. What needs to be done for the 2004 Go Decision?: Characterize Mars Environmental Conditions: Civil Engineering, Material Durability, etc.; Determine Credibility of Inflatable Structures for Human Habitation; and Determine Seal Technology for Mechanisms and Hatches, Life Cycle, and Durability. An overview encompassing all of the issues above is presented.
-
Development of coal energy utilization technologies
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-09-01
Coal liquefaction produces new and clean energy by performing hydrogenation, decomposition and liquefaction on coal under high temperatures and pressures. NEDO has been developing bituminous coal liquefaction technologies by using a 150-t/d pilot plant. It has also developed quality improving and utilization technologies for liquefied coal, whose practical use is expected. For developing coal gasification technologies, construction is in progress for a 200-t/d pilot plant for spouted bed gasification power generation. NEDO intends to develop coal gasification composite cycle power generation with high efficiency and of environment harmonious type. This paper summarizes the results obtained during fiscal 1994. It also dwells on technologies to manufacture hydrogen from coal. It further describes development of technologies to manufacture methane and substituting natural gas (SNG) by hydrogenating and gasifying coal. The ARCH process can select three operation modes depending on which of SNG yield, thermal efficiency or BTX yield is targeted. With respect to promotion of coal utilization technologies, description is given on surveys on development of next generation technologies for coal utilization, and clean coal technology promotion projects. International coal utilization and application projects are also described. 9 figs., 3 tabs.
-
Consuming technologies - developing routines
DEFF Research Database (Denmark)
Gram-Hanssen, Kirsten
2008-01-01
technologies and in this article these processes will be investigated from three different perspectives: an historical perspective of how new technologies have entered homes, a consumer perspective of how both houses and new technologies are purchased and finally, as the primary part of the article, a user...... perspective of how routines develop while these technologies are being used. In the conclusion these insights are discussed in relation to possible ways of influencing routines....
-
HTGR technology development: status and direction
International Nuclear Information System (INIS)
Kasten, P.R.
1982-01-01
During the last two years there has been an extensive and comprehensive effort expended primarily by General Atomic (GA) in generating a revised technology development plan. Oak Ridge National Laboratory (ORNL) has assisted in this effort, primarily through its interactions over the past years in working together with GA in technology development, but also through detailed review of the initial versions of the technology development plan as prepared by GA. The plan covers Fuel Technology, Materials Technology (including metals, graphite, and ceramics), Plant Technology (including methods, safety, structures, systems, heat exchangers, control and electrical, and mechanical), and Component Design Verification and Support areas
-
Task 10 - technology development integration. Semi-annual report, April 1--September 30, 1996
International Nuclear Information System (INIS)
Hendrikson, J.G.; Daly, D.J.
1997-01-01
The Energy and Environmental Research Center (EERC), in conjunction with the Waste Policy Institute (WPI), will identify and integrate new technologies to meet site-specific environmental management (EM) requirements at contaminated sites appropriate to U.S. Department of Energy (DOE) interests. This paper briefly reports overall progress for three activities: technology management, project management, and technology integration. Work performed over the reporting period has focused on providing logistical and administrative support. In addition, six monthly WPI reports to the EERC are included as appendices. The WPI reports contained detailed information for progress in each activity
-
Robotics Technology Crosscutting Program. Technology summary
International Nuclear Information System (INIS)
1995-06-01
The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE's Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas
-
Robotics Technology Crosscutting Program. Technology summary
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-06-01
The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.
-
Technology research and development
International Nuclear Information System (INIS)
Haas, G.M.; Abdov, M.A.; Baker, C.C.; Beuligmann, R.F.
1985-01-01
The U.S. Dept. of Energy discusses the new program plan, the parameters of which are a broad scientific and technology knowledge base, an attractive plasma configuration to be determined, and other issues concerning uncertainty as to what constitutes attractive fusion options to be determined in the future, and increased collaboration. Tables show changing directions in magnetic fusion energy, two examples of boundary condition impacts on long-term technology development, and priority classes of the latter. The Argonne National Laboratory comments on the relationship between science, technology and the engineering aspects of the fusion program. UCLA remarks on the role of fusion technology in the fusion program plan, particularly on results from the recent studies of FINESSE. General Dynamics offers commentary on the issues of a reduced budget, and new emphasis on science which creates an image of the program. A table illustrates technology research and development in the program plan from an industrial perspective
-
The DOE/EM facility transition program
International Nuclear Information System (INIS)
Bixby, W.
1994-01-01
The mission of EM-60 is to plan, implement, and manage receipt of surplus facilities resulting from downsizing of the DOE Weapons Complex facilities and DOE operating program offices to EM, and to ensure prompt deactivation of such facilities in order to reach a minimum surveillance and maintenance condition. The revised organizational structure of EM-60 into four offices (one at headquarters, and the other three at field sites), reflects increased operating functions associated with deactivation, surveillance, and maintenance of facilities. EM-60's deactivation and transition role concerns technical, socioeconomic, institutional, and administrative issues. The primary objective of the deactivation process is to put facilities in the lowest surveillance and maintenance condition safely and quickly by driving down the open-quotes mortgageclose quotes costs of maintaining them until final disposition. EM-60's three key activities are: (1) Inventory of surplus facilities - The 1993 Surplus Facility Inventory and Assessment (SFIA) serves as a planning tool to help the Department and EM-60 determine optimal transition phasing, with safety and cost-effectiveness remaining a priority. (2) Management of accelerated facility life cycle transition - Transitions currently underway illustrate site issues. These include addressing the interests of federal and state regulatory agencies as well as interests of local stakeholders, safe management of large amounts of production residues, and options for treatment, storage, transportation, and disposal. Of equal importance in the transition process is planning the optimal transition of the labor force. (3) Economic development - to address the socio-economic impacts on affected communities of the severe and rapid downsizing of the DOE Weapons Complex, DOE is pursuing an approach that uses the land, equipment, technology assets, and highly skilled local workforces as a basis for alternative economic development
-
Tracing Impacts of Science and Technology Development
Powell, Jeanne
2003-03-01
ATP's Mission and Operations. The ATP partners with industry to accelerate the development of innovative technologies for broad national economic benefit. The program's focus is on co-funding collaborative, multi-disciplinary technologies and enabling technology platforms that appear likely to be commercialized, with private sector funding, once the high technical risks are reduced. Industry-led projects are selected for funding in rigorous competitions on the basis of technical and economic merit. Since 1990, ATP has co-funded 642 projects, with 1,329 participants and another 1,300 subcontractors. Measuring to Mission: Overview of ATP's Evaluation Program. ATP's multi-component evaluation strategy provides measures of progress and performance matched to the stage of project evolution; i.e., for the short-term, from the time of project selection and over the course of the R for the mid-term, as commercial applications are pursued, early products reach the market, and dissemination of knowledge created in the R projects occurs; and for the longer-term, as more fully-developed technologies diffuse across multiple products and industries. The approach is applicable to all public S programs and adaptable to private or university projects ranging from basic research to applied industrial R. Examples of Results. ATP's composite performance rating system assesses ATP's completed projects against multi-faceted performance criteria of Knowledge Creation and Dissemination and Commercialization Progress 2-3 years after the end of ATP-funded R. It generates scores ranging from zero to four stars. Results for ATP's first 50 completed projects show that 16are in the bottom group of zero or one stars. 60the middle group. It is understood that not all ATP projects will be successful given the program's emphasis on funding high-risk technology development that the private sector is unwilling and unable to fund alone. Different technologies have different timelines for
-
Forward-Looking Planning of Technology Development
Directory of Open Access Journals (Sweden)
Katarzyna Halicka
2015-12-01
Full Text Available The main aim of this article is to adapt the Future-Oriented Technology Analysis (FTA to prospective planning of technology development. Firstly, the article presents the assumptions, methods and idea, as well as the concept of the FTA method. Moreover, selected publications on the use of this method were analysed. Then, an original, base model of forward-looking planning of technology development was constructed and presented. The end result of this process will be the development of the localized in time, presented in graphic form, action plan referred to as the route of technology development. Basing on the literature review and the research projects a preliminary route of development of arbitrarily chosen technology was also built and presented.
-
Directory of Open Access Journals (Sweden)
Xiangzheng Deng
2012-06-01
Full Text Available Bioenergy is currently regarded as a renewable energy source with a high growth potential. Forest-based biodiesel, with the significant advantage of not competing with grain production on cultivated land, has been considered as a promising substitute for diesel fuel by many countries, including China. Consequently, extracting biodiesel from <em>Jatropha
-
Development of nuclear fuel cycle technology
International Nuclear Information System (INIS)
Kawahara, Akira; Sugimoto, Yoshikazu; Shibata, Satoshi; Ikeda, Takashi; Suzuki, Kazumichi; Miki, Atsushi.
1990-01-01
In order to establish the stable supply of nuclear fuel as an important energy source, Hitachi ltd. has advanced the technical development aiming at the heightening of reliability, the increase of capacity, upgrading and the heightening of performance of the facilities related to nuclear fuel cycle. As for fuel reprocessing, Japan Nuclear Fuel Service Ltd. is promoting the construction of a commercial fuel reprocessing plant which is the first in Japan. The verification of the process performance, the ensuring of high reliability accompanying large capacity and the technical development for recovering effective resources from spent fuel are advanced. Moreover, as for uranium enrichment, Laser Enrichment Technology Research Association was founded mainly by electric power companies, and the development of the next generation enrichment technology using laser is promoted. The development of spent fuel reprocessing technology, the development of the basic technology of atomic process laser enrichment and so on are reported. In addition to the above technologies recently developed by Hitachi Ltd., the technology of reducing harm and solidification of radioactive wastes, the molecular process laser enrichment and others are developed. (K.I.)
-
Development of National Technology Audit Policy
Directory of Open Access Journals (Sweden)
Subiyanto Subiyanto
2017-07-01
Full Text Available The Laws have mandated implementation of technology audit, nevertheless such implementation needs an additional policy that is more technical. The concept of national audit technology policy shall make technology audit as a tool to ensure the benefit of technology application for society and technology advance for nation independency. This article discusses on technology audit policy concept especially infrastructure requirement, with emphasis on regulation, implementation tools, and related institution. The development of technology audit policy for national interest requires provision of mandatory audit implementation, accompanied by tools for developing technology auditor’s competence and technology audit institutional’s mechanism. To guide technology auditor’s competence, concept of national audit technology policy shall classify object of technology audit into product technology, production technology, and management of technology, accompanied by related parameters of technology performance evaluation.
-
SBWR technology and development
International Nuclear Information System (INIS)
Rao, A.S.; McCandless, R.J.; Sawyer, C.D.
1991-01-01
The simplified boiling water reactor (SBWR) is based on utilizing to the maximum extent possible proven light water reactor (LWR) technology developed through 30 years of operating plant experience plus the advanced boiling water reactor (ABWR) technology development program. For the unique features, developmental programs have been put in place to qualify the design. Thus, the focus of technology development has been on the passive safety features - the gravity-driven ECCS (GDCS) and the containment heat removal (PCCS). General Electric constructed a full-height, scaled, integral facility to demonstrate the GDCS concept and provide data for methods qualification. For the PCCS, a three-pronged program was implemented. Basic heat transfer data were obtained via testing at the Massachusetts Institute of Technology and the University of California at Berkeley. A full-height scaled integral facility to demonstrate the PCCS concept and provide data for methods qualification was constructed in Japan in 1989. Initial testing is now complete. Design of a full-scale heat exchanger unit is underway and testing is planned for completion in early 1993
-
Development of the advanced CANDU technology -Development of basic technology for HWR design
International Nuclear Information System (INIS)
Seok, Ho Cheon; Seok, Soo Dong; Lee, Sang Yong
1996-07-01
It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR's that are now being operated or constructed in Korea. It is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 71 tabs., 147 figs., 143 refs. (Author)
-
Al-Rawashdeh, M.I.M.; Alfeeli, B.; Rawashdeh, A.M.; Hessel, V.
2013-01-01
Current developments in the field of micro-nano technologies in the Middle East and North Africa (MENA) region are highlighted. Firstly, the scientific outcome of micro-nano technologies from the MENA region is analyzed. Egypt and Saudi Arabia are the leading countries, with >50% of the total MENA
-
Development of Radiochemical Separation Technology
Energy Technology Data Exchange (ETDEWEB)
Lee, Eil Hee; Kim, K. W.; Yang, H. B. (and others)
2007-06-15
This project of the second phase was aimed at the development of basic unit technologies for advanced partitioning, and the application tests of pre-developed partitioning technologies for separation of actinides by using a simulated multi-component radioactive waste containing Am, Np, Tc, U and so on. The goals for recovery yield of TRU, and for purity of Tc are high than 99% and about 99%, respectively. The work scopes and contents were as follows. 1). For the development of basic unit technologies for advanced partitioning. 1. Development of technologies for co-removal of TRU and for mutual separation of U and TRU with a reduction-complexation reaction. 2. Development of extraction system for high-acidity co-separation of An(+3) and Ln(+3) and its radiolytic evaluation. 3. Synthesis of extractants for the selective separation of An(+3) and its relevant extraction system development. 4. Development of a hybrid system for the recovery of noble metals and its continuous separation tests. 5. Development of electrolytic system for the decompositions of N-NO3 and N-NH3 compounds to nitrogen gas. 2). For the application test of pre-developed partitioning technologies for the separation of actinide elements in a simulated multi-component solution equivalent to HLW level. 1. Co-separation of Tc, Np and U by a (TBP-TOA)/NDD system. 2. Mutual-separation of Am, Cm and RE elements by a (Zr-DEHPA)/NDD system. All results will be used as the fundamental data for the development of advanced partitioning process in the future.
-
Cutting-edge characterization technologies for D and D
International Nuclear Information System (INIS)
Bossart, S.J.; Kasper, K.M.
1998-01-01
The US Department of Energy's (DOE's) Office of Science and Technology (OST) has been developing and demonstrating technologies to improve methods used to characterize the presence and quantity of contaminants. As a part of OST, the Deactivation and Decommissioning (D and D) Focus Area has been developing and demonstrating innovative technologies for facility characterization to reduce costs associated with this important D and D activity. Characterization activities are an essential and substantial part of D and D. An initial scoping survey must be done to identify personnel hazards and to develop a decommissioning plan. Detailed characterization data must be collected to determine the type and magnitude of contaminants to begin decontamination and dismantlement activities. Surveys must be done during decontamination activities to determine the effectiveness of the decontamination efforts. A final status survey is required, and a confirmatory survey may also be required to document the end-state of a facility. These extensive characterization efforts contribute substantially to the overall cost of a D and D project. Through its Large-Scale Demonstration Program, the D and D Focus Area has been demonstrating many innovative technologies to improve D and D characterization processes. During the large-scale demonstration projects, innovative characterization technologies are evaluated alongside competing baseline technologies. Innovative technology summary reports are being generated on all of these technologies. When they are completed, they will be available through the DOE Office of Science and Technology's Homepage at http://em-52.em.doe.gov/idf/ost/pubs.htm
-
Learning in renewable energy technology development
International Nuclear Information System (INIS)
Junginger, M.
2005-01-01
The main objectives of this thesis are: to investigate technological change and cost reduction for a number of renewable electricity technologies by means of the experience curve approach; to address related methodological issues in the experience curve approach, and, based on these insights; and to analyze the implications for achieving the Dutch renewable electricity targets for the year 2020 within a European context. In order to meet these objectives, a number of research questions have been formulated: What are the most promising renewable electricity technologies for the Netherlands until 2020 under different technological, economic and environmental conditions?; To what extent is the current use of the experience curve approach to investigate renewable energy technology development sound, what are differences in the utilization of this approach and what are possible pitfalls?; How can the experience curve approach be used to describe the potential development of partially new energy technologies, such as offshore wind energy? Is it possible to describe biomass fuel supply chains with experience curves? What are the possibilities and limits of the experience curve approach when describing non-modular technologies such as large (biomass) energy plants?; What are the main learning mechanisms behind the cost reduction of the investigated technologies?; and How can differences in the technological progress of renewable electricity options influence the market diffusion of renewable electricity technologies, and what implications can varying technological development and policy have on the implementation of renewable electricity technologies in the Netherlands? The development of different renewable energy technologies is investigated by means of some case studies. The possible effects of varying technological development in combination with different policy backgrounds are illustrated for the Netherlands. The thesis focuses mainly on the development of investment
-
Technology development for radiation shielding analysis
International Nuclear Information System (INIS)
Ha, Jung Woo; Lee, Jae Kee; Kim, Jong Kyung
1986-12-01
Radiation shielding analysis in nuclear engineering fields is an important technology which is needed for the calculation of reactor shielding as well as radiation related safety problems in nuclear facilities. Moreover, the design technology required in high level radioactive waste management and disposal facilities is faced on serious problems with rapidly glowing nuclear industry development, and more advanced technology has to be developed for tomorrow. The main purpose of this study is therefore to build up the self supporting ability of technology development for the radiation shielding analysis in order to achieve successive development of nuclear industry. It is concluded that basic shielding calculations are possible to handle and analyze by using our current technology, but more advanced technology is still needed and has to be learned for the degree of accuracy in two-dimensional shielding calculation. (Author)
-
Directory of Open Access Journals (Sweden)
Maria Luiza Franceschi Nicodemo
2010-02-01
Full Text Available The selection of adapted tree species is fundamental for the success of silvopastoral systems. The present study aimed to evaluate the initial development of native trees seedlings planted on pastureland chosen by their economic value and nitrogen retrieval. The seedlings were planted in strips containing three lines. Between each strip there was an area of 15 m with pasture. From the measurements of tree height, diameter at the base, damage by insects or by diseases, it was reported the best performances for canafístula (Peltophorum dubium, pau-jacaré (Piptadenia gonoacantha, mutambo (Guazuma ulmifolia and capixingui (Croton floribundus. Ipê-felpudo (Zeyheria tuberculosa showed the worst performance of all under the conditions evaluated. Survival rate in eleven months for pau-jacaré was under 50%.
A seleção de espécies florestais adequadas é de fundamental importância para o sucesso dos sistemas silvipastoris. O objetivo deste trabalho foi avaliar o desenvolvimento inicial de espécies florestais nativas escolhidas pelo valor econômico e aporte de nitrogênio, plantadas em pastagem. Mudas foram plantadas em faixas com três linhas de árvores. As áreas de 15 m entre as faixas de árvores eram ocupadas por pastagem. A partir da avaliação de crescimento em altura, em diâmetro da base, danos por insetos ou por doenças, registrou-se melhor desempenho inicial de canafístula (Peltophorum dubium, pau-jacaré (Piptadenia gonoacantha, mutambo (Guazuma ulmifolia e capixingui (Croton floribundus. O ipê-felpudo (Zeyheria tuberculosa teve o pior desempenho nas condições estudadas. A taxa de sobrevivência em onze meses do pau-jacaré foi inferior a 50%.
doi: 10.4336/2009.pfb.60.89
-
Robotics Technology Development Program Cross Cutting and Advanced Technology
International Nuclear Information System (INIS)
Harrigan, R.W.; Horschel, D.S.
1994-01-01
Need-based cross cutting technology is being developed which is broadly applicable to the clean up of hazardous and radioactive waste within the US Department of Energy's complex. Highly modular, reusable technologies which plug into integrated system architectures to meet specific robotic needs result from this research. In addition, advanced technologies which significantly extend current capabilities such as automated planning and sensor-based control in unstructured environments for remote system operation are also being developed and rapidly integrated into operating systems
-
Directory of Open Access Journals (Sweden)
Alexandre Augusto de Oliveira Gobesso
2009-12-01
Full Text Available O objetivo deste trabalho foi determinar as possíveis diferenças entre períodos diurno e noturno dos coeficientes de digestibilidade parcial pré-cecal da matéria seca, matéria orgânica, amido, proteína bruta, fibra em detergente ácido e fibra em detergente neutro de diferentes dietas formuladas com concentrados energéticos à base de milho, aveia, sorgo e milho/aveia 50/50%. Foram utilizados quatro cavalos íleo-fistulados com 36±4 meses de idade, mestiços, machos, castrados, com peso médio de 308±32kg. O delineamento experimental foi um quadrado latino 4X4 (quatro tratamentos, quatro períodos. Houve diferenças entre os períodos diurno e noturno nas frações da matéria seca, matéria orgânica, amido, fibra em detergente ácido e fibra em detergente neutro no tratamento a base de milho, nas frações fibra em detergente acido e fibra em detergente neutro no tratamento com aveia, e na fibra em detergente ácido dos tratamentos com sorgo e milho/aveia 50/50%.
-
Directory of Open Access Journals (Sweden)
Maria Elisabetta Guerzoni
2012-06-01
Full Text Available Chemical constituents of liverwort (<em>Porella cordaeanaem> extracts have been identified using solid-phase microextraction-gas chromatography mass spectrometry (SPME-GC/MS. The methanol, ethanol and ethyl acetate extracts were rich in terpenoids such as sesquiterpene hydrocarbons (53.12%, 51.68%, 23.16%, and monoterpene hydrocarbons (22.83%, 18.90%, 23.36%, respectively. The dominant compounds in the extracts were β-phellandrene (15.54%, 13.66%, 12.10% and β-caryophyllene (10.72%, 8.29%, 7.79%, respectively. The antimicrobial activity of the extracts was evaluated against eleven food microorganisms using the microdilution and disc diffusion methods. The minimum inhibitory concentration (MIC varied from 0.50 to 2.00 mg/mL for yeast strains (<em>Saccharomyces cerevisiae 635em>, <em>Zygosacharomyces bailii 45em>, <em>Aerobasidium pullulans L6Fem>, <em>Pichia membranaefaciens OC 71em>, <em>Pichia membranaefaciens OC 70em>, <em>Pichia anomalaem> <em>CBS 5759em>, <em>Pichia anomala DBVPG 3003em> and<em> em>
-
Camp, Jordan; Conklin, John; Livas, Jeffrey; Klipstein, William; McKenzie, Kirk; Mueller, Guido; Mueller, Juergen; Thorpe, James Ira; Arsenovic, Peter; Baker, John;
2013-01-01
Humankind will detect the first gravitational wave (GW) signals from the Universe in the current decade using ground-based detectors. But the richest trove of astrophysical information lies at lower frequencies in the spectrum only accessible from space. Signals are expected from merging massive black holes throughout cosmic history, from compact stellar remnants orbiting central galactic engines from thousands of close contact binary systems in the Milky Way, and possibly from exotic sources, some not yet imagined. These signals carry essential information not available from electromagnetic observations, and which can be extracted with extraordinary accuracy. For 20 years, NASA, the European Space Agency (ESA), and an international research community have put considerable effort into developing concepts and technologies for a GW mission. Both the 2000 and 2010 decadal surveys endorsed the science and mission concept of the Laser Interferometer Space Antenna (LISA). A partnership of the two agencies defined and analyzed the concept for a decade. The agencies partnered on LISA Pathfinder (LPF), and ESA-led technology demonstration mission, now preparing for a 2015 launch. Extensive technology development has been carried out on the ground. Currently, the evolved Laser Interferometer Space Antenna (eLISA) concept, a LISA-like concept with only two measurement arms, is competing for ESA's L2 opportunity. NASA's Astrophysics Division seeks to be a junior partner if eLISA is selected. If eLISA is not selected, then a LISA-like mission will be a strong contender in the 2020 decadal survey. This Technology Development Roadmap (TDR) builds on the LISA concept development, the LPF technology development, and the U.S. and European ground-based technology development. The eLISA architecture and the architecture of the Mid-sized Space-based Gravitational-wave Observatory (SGO Mid)-a competitive design with three measurement arms from the recent design study for a NASA
-
Electromagnetic forming - a potentially viable technique for accelerator technology
International Nuclear Information System (INIS)
Rajawat, R.K.; Desai, S.V.; Kulkarni, M.R.; Dolly Rani; Nagesh, K.V.; Sethi, R.C.
2003-01-01
Modern day accelerator development encompasses a myriad technologies required for their diverse needs. Whereas RF, high voltage, vacuum, cryogenics etc., technologies meet their functional requirements, high finish lapping processes, ceramic-metal joining, oven brazing, spark erosion or wire cutting etc., are a must to meet their fabrication requirements. Electromagnetic (EM) forming technique falls in the latter category and is developed as a special technology. It is currently catering to the development as a nuclear reactor technology, but has the potential to meet accelerator requirements too. This paper highlights the general principle of its working, simple design guidelines, advantages, and suggests some specific areas where this could benefit accelerator technologies
-
Directory of Open Access Journals (Sweden)
Maria Cristina Piumbato Innocentini Hayashi
2006-01-01
Full Text Available A inovação tecnológica trouxe para o debate a questão do desenvolvimento tecnológico sustentável. O artigo apresenta um conjunto de reflexões teóricas sobre os temas ciência,tecnologia e desenvolvimento sustentável e aponta as contribuições da Ciência da Informação, enquanto ciência interdisciplinar, para a compreensão do desenvolvimento sustentável. Com base neste referencial foi realizada uma investigação, de natureza exploratória descritiva comabordagem quanti-qualitativa, tendo como objetivo principal identificar a presença da temática do desenvolvimento sustentável em grupos de pesquisa da UFSCar cadastrados noDiretório de Grupos de Pesquisa no Brasil/CNPq. Os resultados apontaram que a temática do desenvolvimento sustentável está presente em onze grupos de pesquisa da UFSCar distribuídas em diferentes áreas de conhecimento. Comparando os dados obtidos com os grupos de pesquisa do país que participaram do Censo 2004 do Diretório de Grupos de Pesquisa no Brasil/CNPq verificou-se que há similaridade entre ambos os achados. De acordo com a literatura científica, confirma-se que a temática do desenvolvimento sustentável é interdisciplinar e que a produção de conhecimento dos grupos de pesquisa é fruto de saberesarticulados entre várias áreas do conhecimento.The technological innovation brought for the debate the question of the sustainable technological development. The article presents an entirety of theoretical reflections on the science, technology and sustainable development themes and to aim the contributions of the Information Science, while interdisciplinary science, with respect to the understanding of the sustainable development. With basis in this reference it was carried through the investigation of descriptive exploratory nature with quanti-qualitative boarding, having as main objective to identify the presence of the sustainable development thematic in research groups of the UFSCar
-
Directory of Open Access Journals (Sweden)
Chad H. Stahl
2012-05-01
Full Text Available Satellite cell activity is necessary for postnatal skeletal muscle growth. Severe phosphate (PO4 deficiency can alter satellite cell activity, however the role of neonatal PO4 nutrition on satellite cell biology remains obscure. Twenty-one piglets (1 day of age, 1.8 ± 0.2 kg BW were pair-fed liquid diets that were either PO4 adequate (0.9% total P, supra-adequate (1.2% total P in PO4 requirement or deficient (0.7% total P in PO4 content for 12 days. Body weight was recorded daily and blood samples collected every 6 days. At day 12, pigs were orally dosed with BrdU and 12 h later, satellite cells were isolated. Satellite cells were also cultured <em>in vitroem> for 7 days to determine if PO4 nutrition alters their ability to proceed through their myogenic lineage. Dietary PO4 deficiency resulted in reduced (<em>P> < 0.05 sera PO4 and parathyroid hormone (PTH concentrations, while supra-adequate dietary PO4 improved (<em>P> < 0.05 feed conversion efficiency as compared to the PO4 adequate group. <em>In vivoem> satellite cell proliferation was reduced (<em>P> < 0.05 among the PO4 deficient pigs, and these cells had altered <em>in vitroem> expression of markers of myogenic progression. Further work to better understand early nutritional programming of satellite cells and the potential benefits of emphasizing early PO4 nutrition for future lean growth potential is warranted.
-
Regulação, circulação e distribuição da penicilina em Portugal (anos 40 e 50 do século XX)
Bell, Victoria; Pita, João Rui; Pereira, Ana Leonor
2017-01-01
Estudar a regulação, circulação e distribuição da penicilina em Portugal nos anos 40 e 50 do século XX. Estudo realizado no Arquivo da Cruz Vermelha Portuguesa e no Arquivo da Universidade de Coimbra. Conclui-se que Portugal teve uma exemplar regulação e distribuição da penicilina
-
Tailings technology. Decommissioning and rehabilitation remedial action technology development
International Nuclear Information System (INIS)
Ramsey, R.W. Jr.
1982-01-01
This paper is to provide an overview of technology requirements for long-term uranium mill tailings disposal and remedial actions for existing tailings to ensure their adequate disposal. The paper examines the scientific disciplines that are the basis for the technology of uranium mill tailings stabilization and the design of barriers to control radiological exposure or environmental degradation at the location of tailings disposal. The discussion is presented as a hypothetical course of instruction at a fictitious university. Features of six mechanisms of dispersal or intrusion are examined with brief discussion of the applicable technology development for each. The paper serves as an introduction to subsequent specific technology development papers in the session. (author)
-
How does technological regime affect performance of technology development projects?
Song, Michael; Hooshangi, Soheil; Zhao, Y. Lisa; Halman, Johannes I.M.
2014-01-01
In this study, we examine how technological regime affects the performance of technology development projects (i.e., project quality, sales, and profit). Technological regime is defined as the set of attributes of a technological environment where the innovative activities of firms take place.
-
Development of Food Preservation and Processing Technologies by Radiation Technology
International Nuclear Information System (INIS)
Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun
2007-07-01
To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of
-
Development of Food Preservation and Processing Technologies by Radiation Technology
Energy Technology Data Exchange (ETDEWEB)
Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun [and others
2007-07-15
To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of
-
Development of Food Preservation and Processing Technologies by Radiation Technology
Energy Technology Data Exchange (ETDEWEB)
Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)
2007-07-15
To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of
-
Design and development for updating national 1:50,000 topographic databases in China
Directory of Open Access Journals (Sweden)
CHEN Jun
2010-02-01
Full Text Available 1.1 Objective Map databases are irreplaceable national treasure of immense importance. Their currency referring to its consistency with respect to the real world plays a critical role in its value and applications. The continuous updating of map databases at 1:50,000 scales is a massive and difficult task for larger countries of the size of more than several million’s kilometer squares. This paper presents the research and technological development to support the national map updating at 1:50,000 scales in China, including the development of updating models and methods, production tools and systems for large-scale and rapid updating, as well as the design and implementation of the continuous updating workflow. 1.2 Methodology The updating of map databases is different than its original creation, and a number of new problems should be solved, such as change detection using latest multi-source data, incremental object revision and relation amendment. The methodology of this paper consists of the following three parts: 1 Examine the four key aspects of map database updating and develop basic updating models/methods, such as currentness-oriented integration of multi-resource data, completeness-based incremental change detection in the context of existing datasets, consistency-aware processing of updated data sets, and user-friendly propagation and services of updates. 2 Design and develop specific software tools and packages to support the large-scale updating production with high resolution imagery and large-scale data generalization, such as map generalization, GIS-supported change interpretation from imagery, DEM interpolation, image matching-based orthophoto generation, data control at different levels. 3 Design a national 1:50,000 databases updating strategy and its production workflow, including a full coverage updating pattern characterized by all element topographic data modeling, change detection in all related areas, and whole process
-
Energy Technology Data Exchange (ETDEWEB)
Temkin, Richard [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)
2014-12-24
Electron Cyclotron Heating (ECH) is needed for plasma heating, current drive, plasma stability control, and other applications in fusion energy sciences research. The program of fusion energy sciences supported by U. S. DOE, Office of Science, Fusion Energy Sciences relies on the development of ECH technology to meet the needs of several plasma devices working at the frontier of fusion energy sciences research. The largest operating ECH system in the world is at DIII-D, consisting of six 1 MW, 110 GHz gyrotrons capable of ten second pulsed operation, plus two newer gyrotrons. The ECH Technology Development research program investigated the options for upgrading the DIII-D 110 GHz ECH system. Options included extending present-day 1 MW technology to 1.3 – 1.5 MW power levels or developing an entirely new approach to achieve up to 2 MW of power per gyrotron. The research consisted of theoretical research and designs conducted by Communication and Power Industries of Palo Alto, CA working with MIT. Results of the study would be validated in a later phase by research on short pulse length gyrotrons at MIT and long pulse / cw gyrotrons in industry. This research follows a highly successful program of development that has led to the highly reliable, six megawatt ECH system at the DIII-D tokamak. Eventually, gyrotrons at the 1.5 megawatt to multi-megawatt power level will be needed for heating and current drive in large scale plasmas including ITER and DEMO.
-
Policy issues inherent in advanced technology development
Energy Technology Data Exchange (ETDEWEB)
Baumann, P.D.
1994-12-31
In the development of advanced technologies, there are several forces which are involved in the success of the development of those technologies. In the overall development of new technologies, a sufficient number of these forces must be present and working in order to have a successful opportunity at developing, introducing and integrating into the marketplace a new technology. This paper discusses some of these forces and how they enter into the equation for success in advanced technology research, development, demonstration, commercialization and deployment. This paper limits itself to programs which are generally governmental funded, which in essence represent most of the technology development efforts that provide defense, energy and environmental technological products. Along with the identification of these forces are some suggestions as to how changes may be brought about to better ensure success in a long term to attempt to minimize time and financial losses.
-
Policy issues inherent in advanced technology development
International Nuclear Information System (INIS)
Baumann, P.D.
1994-01-01
In the development of advanced technologies, there are several forces which are involved in the success of the development of those technologies. In the overall development of new technologies, a sufficient number of these forces must be present and working in order to have a successful opportunity at developing, introducing and integrating into the marketplace a new technology. This paper discusses some of these forces and how they enter into the equation for success in advanced technology research, development, demonstration, commercialization and deployment. This paper limits itself to programs which are generally governmental funded, which in essence represent most of the technology development efforts that provide defense, energy and environmental technological products. Along with the identification of these forces are some suggestions as to how changes may be brought about to better ensure success in a long term to attempt to minimize time and financial losses
-
ELECTRICAL MUSCLE STIMULATION (EMS IMPLEMENTATION IN EXPLOSIVE STRENGTH DEVELOPMENT
Directory of Open Access Journals (Sweden)
Zoran Đokić
2013-07-01
Full Text Available Electrical muscle stimulation (EMS, is also known as neuromuscular electrical stimulation (NMES may be used for therapeutic purposes and training. EMS is causing muscle contractions via electrical impulses. The survey was conducted as a case study. The study was conducted on subject of 3 male of different ages. The study lasted 4 weeks, and the respondents have not used any type of training or activity, which would affect the development of explosive strength of the lower extremities. Electrical stimulation was performed in the evening, every other day, with COMPEX mi sport apparatus (Medical SA - All rights reserved - 07/06 - Art. 885,616 - V.2 model. In 4 week period, a total of 13 treatments were performed on selected muscle groups - quadriceps femoris and gastrocnemius. Program of plyometric training (Plyometric (28 min per treatment, for each muscle group were applied. The main objective of this study was to quantify and compare explosive leg strength, using different vertical jump protocols, before and after the EMS program. The initial and final testing was conducted in the laboratory of the Faculty of Sport and Tourism in Novi Sad, on the contact plate AXON JUMP (Bioingeniería Deportiva, VACUMED, 4538 Westinghouse Street Ventura, CA 93 003 under identical conditions. In all three of the respondents indicated an increase in vertical jump in all applied protocols.
-
Chicago Operations Office: Technology summary
Energy Technology Data Exchange (ETDEWEB)
1994-12-01
This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation (RDDT and E) activities funded through the Chicago Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US Industry`s competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents which highlight technology development activities within each of the OTD program elements. OTD technologies addresses three specific problem areas: (1) groundwater and soils cleanup; (2) waste retrieval and processing; and (3) pollution prevention. These problems are not unique to DOE, but are associated with other Federal agency and industry sites as well. Thus, technical solutions developed within OTD programs will benefit DOE, and should have direct applications in outside markets.
-
Chicago Operations Office: Technology summary
International Nuclear Information System (INIS)
1994-12-01
This document has been prepared by the Department of Energy's (DOE) Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation (RDDT and E) activities funded through the Chicago Operations Office. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US Industry's competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents which highlight technology development activities within each of the OTD program elements. OTD technologies addresses three specific problem areas: (1) groundwater and soils cleanup; (2) waste retrieval and processing; and (3) pollution prevention. These problems are not unique to DOE, but are associated with other Federal agency and industry sites as well. Thus, technical solutions developed within OTD programs will benefit DOE, and should have direct applications in outside markets
-
Working Environment and Technological Development
DEFF Research Database (Denmark)
Clausen, Christian; Nielsen, Klaus T.; Jensen, Per Langaa
1997-01-01
and their and their concept of working environment2) Technology renewal, which considers the role of the working environment in connection with the development and use of concrete technologies3) Working environment planning, which considers the existing efforts to place the working environment in a planning process.......The paper describes the purpose, themes, overarching research questions and specific projects of the programme: Working Environment and Technological Development. The major research themes are:1) Management concepts and the working environment, which considers the visions...
-
Engineering research, development and technology
International Nuclear Information System (INIS)
1994-05-01
The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report
-
Technology Development: From Idea to Implementation - 12131
Energy Technology Data Exchange (ETDEWEB)
Spires, Renee H. [Savannah River Remediation (United States)
2012-07-01
There are good ideas and new technologies proposed every day to solve problems within the DOE complex. A process to transition a new technology from inception to the decision to launch a project with baselines is described. Examples from active technology development projects within Savannah River Remediation (SRR) will be used to illustrate the points. The process includes decision points at key junctures leading to preliminary design. At that point, normal project management tools can be employed. The technology development steps include proof-of-principle testing, scaled testing and analysis, and conceptual design. Tools are used that define the scope necessary for each step of technology development. The tools include use of the DOE technology readiness guide, Consolidated Hazards Analysis (CHA) and internal checklists developed by Savannah River Remediation. Integration with operating or planned facilities is also included. The result is a roadmap and spreadsheet that identifies each open question and how it may be answered. Performance criteria are developed that enable simple decisions to be made after the completion of each step. Conceptual design tasks should begin as the technology development continues. The most important conceptual design tasks at this point in the process include process flow diagrams (PFDs), high level Process and Instrumentation Drawings (P and IDs), and general layout drawings. These should influence the design of the scaled simulant testing. Mechanical and electrical drawings that support cost and schedule development should also be developed. An early safety control strategy developed from the CHA will also influence the cost. The combination of test results, calculations and early design output with rough order of magnitude cost and schedule information provide input into the decisions to proceed with a project and data to establish the baseline. This process can be used to mature any new technology, especially those that must be
-
Development of clean environment conservation technology by radiation
International Nuclear Information System (INIS)
Lee, Myunjoo; Kim, Tak Hyun; Jung, In Ha
2012-04-01
This report is aim to develop the technology for environmental conservation by radiation. It is consisted of two research parts. One is development of wastewater disinfection technology by radiation and the other is development of livestock waste treatment technology by radiation. For the development of wastewater disinfection technology disinfect ion process, technology for treatment of toxic organic chemicals and assessment of ecological toxicity, technology for treatment of endocrine disrupting chemicals and assessment of genetic safety were developed. For the development of livestock waste treatment technology, process for simultaneous removal of nutrients, technology for disinfection and quality enhancement of livestock waste compost, technology for reduction of composting periods, monitoring of toxic organic compounds, pretreatment technology for organic toxic chemicals and enhancement of biological treatment efficiencies were developed. Based on basic research, advanced livestock wastewater treatment process using radiation was established
-
Science and Technology and Economic Development
Lamberte, Mario B.
1988-01-01
Dealing with science and technology and economic development, this paper describes the relationship between technological capability and the degree of economic development. It analyzes the structure of the Philippine economy and the structural changes that have taken place since the 1970. It also investigates the impact of economic developments and technological advances in other countries on the Philippine economy. A discussion on possible research collaboration among PIDS, DOST and regional...
-
Status of irradiation technology development in JMTR
International Nuclear Information System (INIS)
Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.
2008-01-01
Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Centre was organised to development the new irradiation technology for the application at JMTR re-operation. The new irradiation engineering building was remoulded from the old RI development building, and was started to use from the end of September, 2008. Advanced in-situ instrumentation technology(high temperature multi-paired thermocouple, ceramic sensor,application of optical measurement), 99 Mo production technology by new Mo solution irradiation method,recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian countries. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi-paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced
-
Status of Irradiation technology development in JMTR
International Nuclear Information System (INIS)
Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.
2008-01-01
Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Center was organized to development the new irradiation technology for the application at JMTR re operation. The new irradiation engineering building was remodeled from the old RI development building, and was started to use from the end of September, 2008. Advanced in situ instrumentation technology (high temperature multi paired thermocouple, ceramic sensor, application of optical measurement), 99M o production technology by new Mo solution irradiation method, recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian counties. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced
-
Bioética e avaliação tecnológica em saúde Bioethics and health care technology assessment
Directory of Open Access Journals (Sweden)
Fermin Roland Schramm
2000-12-01
Full Text Available A vigência simultânea do paradigma biotecnocientífico (que incentiva a incorporação tecnológica e da cultura dos limites (que seleciona as tecnologias constitui um grande desafio aos sistemas sanitários atuais, suscitando debates éticos e políticos sobre as escolhas a serem feitas. A avaliação tecnológica em saúde diz respeito à análise das conseqüências dos cuidados em saúde e das políticas de saúde, e apresenta pontos de interseção com a bioética, apesar de serem campos distintos. A importância das implicações éticas e sociais da avaliação tecnológica é cada vez mais reconhecida, mas a maioria das publicações tem enfatizado apenas os aspectos metodológicos e científicos. Existem vários tipos de interesses envolvidos na incorporação tecnológica, fontes de conflitos de valores. As implicações éticas incluem aquelas relativas aos ensaios clínicos para aferir sua eficácia; à avaliação da boa ou má prática médica; à forma de incorporar as novas tecnologias e à sua efetividade; ao acesso e à alocação de recursos disponíveis. A incorporação da dimensão ética na avaliação tecnológica possibilitará melhor compreensão da prática de saúde e um avanço em direção ao seu aprimoramento.The simultaneous existence of a biotechnoscientific paradigm (which emphasizes technological incorporation and a culture of limits (which selects technologies challenges current health systems, raising ethical and political discussions as to the choices to be made. Health care technology assessment is mainly concerned with the consequences of health care and health care policies. Thus, there is significant overlap between this activity and bioethics, even though they are different fields of knowledge. Although the importance of ethical and social issues arising in technology assessment has been recognized, most publications emphasize only methodological and scientific aspects. There are different interests
-
Directory of Open Access Journals (Sweden)
Emiko Kawakami de Resende
2009-07-01
Full Text Available O projeto Aquabrasil pretende promover um salto tecnológico na aqüicultura brasileira ao atender às principais demandas da cadeia produtiva aquícola, especialmente na obtenção de alevinos de boa qualidade via melhoramento genético. Utilizando alevinos geneticamente melhorados, com manejo e gestão ambiental associado a boas práticas de manejo, oferecendo alimentos nutricionalmente balanceados, em consonância com os hábitos alimentares de cada espécie e promovendo a identificação e o controle sanitário será possível produzir matéria prima de alta qualidade, passível de processamento agroindustrial capaz de atender tanto ao mercado interno como externo. Participam do projeto Aquabrasil mais de 70 pesquisadores pertencentes a onze unidades de pesquisa da Embrapa e uma série de unidades estaduais e federais, órgãos de pesquisa estaduais e uma série de empresas privadas. Na sua gestão conta com um Conselho Consultivo, formado por órgãos governamentais afetos ao assunto e com a participação da iniciativa privada. A árvore hiperbólica, sistema desenvolvido pela Embrapa, possibilita a gestão do projeto em tempo real.The project aims at giving a technological upgrade to Brazilian aquaculture to attend the demands of the productive chain. The research focus in obtaining genetically improved fishes; in developing environmental friendly feeds of high zootechnical performance; and in implementing the integrated sanitary control in production systems. The adoption of "Best Management Practices" (BPMs in aqualcuture systems will assure the production of good quality fishes and shrimps with higher market prices. The AQUABRASIL project involves more than 70 researchers of eleven different Embrapa research units spread over all the country, national and international research institutes and professors from several public and private universities. An Advisory Council with members from public financial institutions and private sector
-
Lunar Surface Systems Supportability Technology Development Roadmap
Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony;
2011-01-01
The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.
-
Advanced Mirror & Modelling Technology Development
Effinger, Michael; Stahl, H. Philip; Abplanalp, Laura; Maffett, Steven; Egerman, Robert; Eng, Ron; Arnold, William; Mosier, Gary; Blaurock, Carl
2014-01-01
The 2020 Decadal technology survey is starting in 2018. Technology on the shelf at that time will help guide selection to future low risk and low cost missions. The Advanced Mirror Technology Development (AMTD) team has identified development priorities based on science goals and engineering requirements for Ultraviolet Optical near-Infrared (UVOIR) missions in order to contribute to the selection process. One key development identified was lightweight mirror fabrication and testing. A monolithic, stacked, deep core mirror was fused and replicated twice to achieve the desired radius of curvature. It was subsequently successfully polished and tested. A recently awarded second phase to the AMTD project will develop larger mirrors to demonstrate the lateral scaling of the deep core mirror technology. Another key development was rapid modeling for the mirror. One model focused on generating optical and structural model results in minutes instead of months. Many variables could be accounted for regarding the core, face plate and back structure details. A portion of a spacecraft model was also developed. The spacecraft model incorporated direct integration to transform optical path difference to Point Spread Function (PSF) and between PSF to modulation transfer function. The second phase to the project will take the results of the rapid mirror modeler and integrate them into the rapid spacecraft modeler.
-
Assessment of soil properties by organic matter and EM-microorganism incorporation
Directory of Open Access Journals (Sweden)
Valarini P. J.
2003-01-01
Full Text Available Properties of a claim loam soil, collected in Aranjuez (Madrid and enriched with organic matter and microorganisms, were evaluated under controlled temperature and moisture conditions, over a period of three months. The following treatments were carried out: soil (control; soil + 50 t ha-1 of animal manure (E50; soil + 50 t ha-1 of animal manure + 30 L ha-1 of effective microorganisms (E50EM; soil + 30 t ha-1 of the combination of various green crop residues and weeds (RC30 and soil + 30 t ha-1 of the combination of various green crop residues and weeds + 30 L ha-1 of effective microorganisms (RC30EM. Soil samples were taken before and after incubation and their physical, chemical, and microbiological parameters analyzed. Significant increase was observed in the production of exopolysaccharides and basic phosphatase and esterase enzyme activities in the treatments E50EM and RC30EM, in correlation with the humification of organic matter, water retention at field capacity, and the cationic exchange capacity (CEC of the same treatments. The conclusion was drawn that the incorporation of a mixture of effective microorganisms (EM intensified the biological soil activity and improved physical and chemical soil properties, contributing to a quick humification of fresh organic matter. These findings were illustrated by the microbiological activities of exopolysaccharides and by alkaline phosphatase and esterase enzymes, which can be used as early and integrated soil health indicators.
-
Resposta do silício em condições de estresse salino em feijão caupi variedade Gurgéia
Directory of Open Access Journals (Sweden)
Anatercia Ferreira Alves
2014-12-01
Full Text Available Conduziu-se um experimento em casa de vegetação do Departamento de Ciência do Solo da Universidade Federal de Lavras com o objetivo de avaliar o efeito do silício na produção de matéria seca na cultura de feijão caupi variedade Gurgéia, submetidas a estresse salino. Adotou-se esquema fatorial em delineamento inteiramente casualizado, com 4 repetições e duas plantas por vaso de 3 L de capacidade, em que o primeiro fator referiu-se aos níveis de NaCl (0; 25; 50; 100 e 150 mmol.L-1 e o segundo aos níveis de SiO2 (0 e 50 mg.L-1. As soluções foram renovadas em intervalos de 15 dias e aos 90 dias após a semeadura, as plantas foram colhidas e separadas em parte aérea, vagens e raízes, em seguida foram secas para determinação da produção de matéria seca. Observou-se que a adição de silício na dose de 50 ml.L -1 de solução nutritiva contendo NaCl diminuiu o teor de matéria seca na parte aérea e raíz, com exceção das vagens. Na ausência de silício, a produção de matéria seca nas raízes e parte aérea foram maiores nas mesmas condições de estresse salino e em baixas concentrações de NaCl. A produção de matéria seca foi estimulada na ausência de silício.
-
Development of technologies for solar energy utilization
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-09-01
With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.
-
Development of decontamination, decommissioning and environmental restoration technology
Energy Technology Data Exchange (ETDEWEB)
Lee, Byung Jik; Kwon, H S; Kim, G N. and others
1999-03-01
Through the project of 'Development of decontamination, decommissioning and environmental restoration technology', the followings were studied. 1. Development of decontamination and repair technology for nuclear fuel cycle facilities 2. Development of dismantling technology 3. Development of environmental restoration technology. (author)
-
Fusion development and technology
International Nuclear Information System (INIS)
Montgomery, D.B.
1991-01-01
This report discusses the following topics: superconducting magnet technology high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies -- Aries; ITER physics; ITER superconducting PF scenario and magnet analysis; and safety, environmental and economic factors in fusion development
-
Development of decontamination, decommissioning and environmental restoration technology
Energy Technology Data Exchange (ETDEWEB)
Lee, Byung Jik; Kwon, H. S.; Kim, G. N. and others
1999-03-01
Through the project of 'Development of decontamination, decommissioning and environmental restoration technology', the followings were studied. 1. Development of decontamination and repair technology for nuclear fuel cycle facilities 2. Development of dismantling technology 3. Development of environmental restoration technology. (author)
-
Technology development life cycle processes.
Energy Technology Data Exchange (ETDEWEB)
Beck, David Franklin
2013-05-01
This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.
-
Development of fabrication technology for ceramic nuclear fuel
International Nuclear Information System (INIS)
Lee, Young Woo; Sohn, D. S.; Na, S. H.
2003-05-01
The purpose of the study is to develop the fabrication technology of MOX fuel. The researches carried out during the last stage(1997. 4.∼2003. 3.) mainly consisted of ; study of MOX pellet fabrication technology for application and development of characterization technology for the aim of confirming the development of powder treatment technology and sintering technology and of the optimization of the above technologies and fabrication of Pu-MOX pellet specimens through an international joint collaboration between KAERI and PSI based on the fundamental technologies developed in KAERI. Based on the studies carried out and the results obtained during the last stage, more extensive studies for the process technologies of the unit processes were performed, in this year, for the purpose of development of indigenous overall MOX pellet fabrication process technology, relating process parameters among the unit processes and integrating these unit process technologies. Furthermore, for the preparation of transfer of relevant technologies to the industries, a feasibility study was performed on the commercialization of the technology developed in KAERI with the relevant industry in close collaboration
-
Technology Summary Advancing Tank Waste Retrieval And Processing
International Nuclear Information System (INIS)
Sams, T.L.; Mendoza, R.E.
2010-01-01
This technology overview provides a high-level summary of technologies being investigated and developed by Washington River Protection Solutions (WRPS) to advance Hanford Site tank waste retrieval and processing. Technology solutions are outlined, along with processes and priorities for selecting and developing them. This technology overview provides a high-level summary of technologies being investigated, developed, and deployed by WRPS to advance Hanford Site tank waste retrieval and processing. Transformational technologies are needed to complete Hanford tank waste retrieval and treatment by 12/31/2047. Hanford's underground waste storage tanks hold approximately 57 million gallons of radiochemical waste from nuclear defense production - more tank waste than any other site in the United States. In addition, the waste is uniquely complicated because it contains constituents from at least six major radiochemical processes and several lesser processes. It is intermixed and complexed more than any other waste collection known to exist in the world. The multi-faceted nature of Hanford's tank waste means that legally binding agreements in the Federal Facility Agreement and Consent Order (known as the Tri-Party Agreement) and between the Department of Energy (DOE) and its contractors may not be met using current vitrification schedules, plans, and methods. WRPS and the DOE are developing, testing, and deploying technologies to meet the necessary commitments and complete the DOE's River Protection Project (RPP) mission within environmentally acceptable requirements. Technology solutions are outlined, along with processes and priorities for selecting and developing them. DOE's Office of Environmental Management (EM) identifies the environmental management technology needs and the activities necessary to address them. The U.S. Congress then funds these activities through EM or the DOE field offices. Finally, an array of entities that include DOE site prime contractors and
-
Radioactive Dry Process Material Treatment Technology Development
Energy Technology Data Exchange (ETDEWEB)
Park, J. J.; Hung, I. H.; Kim, K. K. (and others)
2007-06-15
The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.
-
Clean Technology Evaluation & Workforce Development Program
Energy Technology Data Exchange (ETDEWEB)
Patricia Glaza
2012-12-01
The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.
-
Technology transfer and development: a preliminary look at Chinese technology in Guyana
Energy Technology Data Exchange (ETDEWEB)
Long, F
1982-05-01
Technology is regarded as a vital ingredient for development. Since developing countries can hardly fill their technological requirements indigenously, such countries tend to acquire the bulk of technology applied to their production systems from abroad. However, the transfer of technology tends to be associated with a series of problems: foreign exchange, inappropriateness, the generation of limited inter-sectorial linkages, limited use of raw materials, and other inputs associated with technology dependency. The study points to the fact that technology transfer need not necessarily be associated with the disadvantages identified in the literature. The study which essentially looks at the use of Chinese technology in clay-brick manufacturing in Guyana, shows that the country was able to reap several development benefits from the technology-transfer arrangement. At the same time, certain problems arising from the technology-transfer package such as the transfer of critical skills in key areas of production, and maintenance and servicing, are discussed. But these, the author argues, are not a function of restrictive conditions found in technology-transfer clauses, but rather of improper technology-transfer management. 2 tables.
-
International Nuclear Information System (INIS)
Brockbank, B.R.
1995-03-01
In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges
-
Development of ultrasensitive spectroscopic analysis technology
International Nuclear Information System (INIS)
Cha, Hyung Ki; Song, K. S.; Kim, D. H.; Yang, K. H.; Jung, E. C.; Jeong, D. Y.; Yi, Y. J.; Lee, S. M.; Hong, K. H.; Han, J. M.; Yoo, B. D.; Rho, S. P.; Yi, J. H.; Park, H. M.; Cha, B. H.; Nam, S. M.; Lee, J. M.
1997-09-01
For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. 1) Laser resonance ionization technology, 2) Laser-induced rare isotope detection technology, 3) Laser-induced plasma analysis technology, 4) Microparticle analysis technology by using ion trap, 5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO 2 , SO 2 , etc. (author). 57 refs., 42 figs
-
Succinic Acid: Technology Development and Commercialization
Directory of Open Access Journals (Sweden)
Nhuan P. Nghiem
2017-06-01
Full Text Available Succinic acid is a precursor of many important, large-volume industrial chemicals and consumer products. It was once common knowledge that many ruminant microorganisms accumulated succinic acid under anaerobic conditions. However, it was not until the discovery of Anaerobiospirillum succiniciproducens at the Michigan Biotechnology Institute (MBI, which was capable of producing succinic acid up to about 50 g/L under optimum conditions, that the commercial feasibility of producing the compound by biological processes was realized. Other microbial strains capable of producing succinic acid to high final concentrations subsequently were isolated and engineered, followed by development of fermentation processes for their uses. Processes for recovery and purification of succinic acid from fermentation broths were simultaneously established along with new applications of succinic acid, e.g., production of biodegradable deicing compounds and solvents. Several technologies for the fermentation-based production of succinic acid and the subsequent conversion to useful products are currently commercialized. This review gives a summary of the development of microbial strains, their fermentation, and the importance of the down-stream recovery and purification efforts to suit various applications in the context of their current commercialization status for biologically derived succinic acid.
-
Pyroprocessing technology development at KAERI
International Nuclear Information System (INIS)
Lee, Han Soo; Park, Geun Il; Kang, Kweon Ho; Hur, Jin Mok; Kim, Jeong Guk; Ahn, Do Hee; Cho, Yung Zun; Kim, Eung Ho
2011-01-01
Pyroprocessing technology was developed in the beginning for metal fuel treatment in the US in the 1960s. The conventional aqueous process, such as PUREX, is not appropriate for treating metal fuel. Pyroprocessing technology has advantages over the aqueous process: less proliferation risk, treatment of spent fuel with relatively high heat and radioactivity, compact equipment, etc. The addition of an oxide reduction process to the pyroprocessing metal fuel treatment enables handling of oxide spent fuel, which draws a potential option for the management of spent fuel from the PWR. In this context, KAERI has been developing pyroprocessing technology to handle the oxide spent fuel since the 1990s. This paper describes the current status of pyroprocessing technology development at KAERI from the head-end process to the waste treatment. A unit process with various scales has been tested to produce the design data associated with the scale up. A performance test of unit processes integration will be conducted at the PRIDE facility, which will be constructed by early 2012. The PRIDE facility incorporates the unit processes all together in a cell with an Ar environment. The purpose of PRIDE is to test the processes for unit process performance, operability by remote equipment, the integrity of the unit processes, process monitoring, Ar environment system operation, and safeguards related activities. The test of PRIDE will be promising for further pyroprocessing technology development
-
A development of solid oxide fuel cell technology
Energy Technology Data Exchange (ETDEWEB)
Lim, Hee Chun; Lee, Chang Woo [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Kim, Kwy Youl; Yoon, Moon Soo; Kim, Ho Ki; Kim, Young Sik; Mun, Sung In; Eom, Sung Wuk [Korea Electrotechnology Research Inst., Changwon (Korea, Republic of)
1996-12-31
Solid oxide fuel cell which was consisted of ceramics has high power density and is very simple in shape. The project named A development of SOFC(Solid Oxide Fuel Cell) technology is to develop the unit cell fabrication processing and to evaluate the unit cell of solid oxide full cell. In this project, a manufacturing process of cathode by citrate method and polymeric precursor methods were established. By using tape casting method, high density thin electrolyte was manufactured and has high performance. Unit cell composed with La{sub 17}Sr{sub 13}Mn{sub 3} as cathode, 8YSZ electrolyte and 50% NiYSZ anode had a performance of O.85 W/cm{sup 2} and recorded 510 hours operation time. On the basis of these results. 100 cm{sup 2} class unit cell will be fabricated and tests in next program (author). 59 refs., 120 figs.
-
A development of solid oxide fuel cell technology
Energy Technology Data Exchange (ETDEWEB)
Lim, Hee Chun; Lee, Chang Woo [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Kim, Kwy Youl; Yoon, Moon Soo; Kim, Ho Ki; Kim, Young Sik; Mun, Sung In; Eom, Sung Wuk [Korea Electrotechnology Research Inst., Changwon (Korea, Republic of)
1995-12-31
Solid oxide fuel cell which was consisted of ceramics has high power density and is very simple in shape. The project named A development of SOFC(Solid Oxide Fuel Cell) technology is to develop the unit cell fabrication processing and to evaluate the unit cell of solid oxide full cell. In this project, a manufacturing process of cathode by citrate method and polymeric precursor methods were established. By using tape casting method, high density thin electrolyte was manufactured and has high performance. Unit cell composed with La{sub 17}Sr{sub 13}Mn{sub 3} as cathode, 8YSZ electrolyte and 50% NiYSZ anode had a performance of O.85 W/cm{sup 2} and recorded 510 hours operation time. On the basis of these results. 100 cm{sup 2} class unit cell will be fabricated and tests in next program (author). 59 refs., 120 figs.
-
An Underground Storage Tank Integrated Demonstration report
International Nuclear Information System (INIS)
Quadrel, M.J.; Hunter, V.L.; Young, J.K.; Lini, D.C.; Goldberg, C.
1993-04-01
The Waste Characterization Data and Technology Development Needs Assessment provides direct support to the Underground Storage Tank Integrated Demonstration (UST-ID). Key users of the study's products may also include individuals and programs within the US Department of Energy (DOE) Office of Technology Development (EM-50), the Office of Waste Operations (EM-30), and the Office of Environmental Restoration (EM-40). The goal of this work is to provide the UST-ID with a procedure for allocating funds across competing characterization technologies in a timely and defensible manner. It resulted in three primary products: 1. It organizes and summarizes information on underground storage tank characterization data needs. 2. It describes current technology development activity related to each need and flags areas where technology development may be beneficial. 3. It presents a decision process, with supporting software, for evaluating, prioritizing, and integrating possible technology development funding packages. The data presented in this document can be readily updated as the needs of the Waste Operations and Environmental Restoration programs mature and as new and promising technology development options emerge
-
Ur Rehman, Ijaz; Shahbaz, Muhammad; Kyophilavong, Phouphet
2013-01-01
We study the relationship between financial development, technological development and economic growth in Romania. We construct aggregate indices of financial development and technological development using principal component analysis. The ARDL bounds testing approach shows the presence of cointegration between financial development, technological development and economic growth. Financial development and technological development contribute to economic growth. Moreover, financial developmen...
-
Ten Items of Integrated Technology Developed by CNPC
Institute of Scientific and Technical Information of China (English)
无
2006-01-01
@@ The technological work of China National Petroleum Corporation (CNPC) was based on the company's general development strategy to become a multinational giant with international competitiveness during the 10th FiveYear Plan Period (2001-2005). The technological efforts were focused on strengthening strategic management of technology to identify the technological development targets, optimizing allocation of technological resources and increasing technological investment to highlight creation of key technology. Aiming at the important and key technologies needed for main business development,CNPC launched 15 technological projects at the State level with a 100 percent completion rate and 379 other projects at the corporate level with a 92.8 percent completion rate. With a number of high-level results achieved, CNPC has developed 10 items of integrated technology.
-
KSC Education Technology Research and Development Plan
Odell, Michael R. L.
2003-01-01
Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.
-
Safeguards and Security Technology Development Directory. FY 1993
Energy Technology Data Exchange (ETDEWEB)
1993-06-01
The Safeguards and Security Technology Development Directory is published annually by the Office of Safeguards and Security (OSS) of the US Department of Energy (DOE), and is Intended to inform recipients of the full scope of the OSS R&D program. It is distributed for use by DOE headquarters personnel, DOE program offices, DOE field offices, DOE operating contractors, national laboratories, other federal agencies, and foreign governments. Chapters 1 through 7 of the Directory provide general information regarding the Technology Development Program, including the mission, program description, organizational roles and responsibilities, technology development lifecycle, requirements analysis, program formulation, the task selection process, technology development infrastructure, technology transfer activities, and current research and development tasks. These chapters are followed by a series of appendices which contain more specific information on aspects of the Program. Appendix A is a summary of major technology development accomplishments made during FY 1992. Appendix B lists S&S technology development reports issued during FY 1992 which reflect work accomplished through the OSS Technology Development Program and other relevant activities outside the Program. Finally, Appendix C summarizes the individual task statements which comprise the FY 1993 Technology Development Program.
-
Development of alternative energy technologies. Entrepreneurs, new technologies, and social change
Energy Technology Data Exchange (ETDEWEB)
Burns, T R
1985-01-01
This paper discusses the introduction and development of several alternative energy technologies in countries where the innovation process has enjoyed some measure of success: solar water heating (California, Israel), windmills (Denmark), wood and peat for co-generation (Northern New England, Finland) and geo-thermal power (California) as well as heat pumps designed to save energy (West Germany). It is argued that the introduction and development of new technologies - and the socio-technical systems which utilize these technologies - depend on the initiatives of entrepreneurs and social change agents. They engage in adapting and matching technology and social structure (laws, institutions, norms, political and economic forces and social structure generally). Successful developments - as well as blocked or retarded developments - are discussed in terms of such ''compatibility analysis''. Policy implications are also discussed. (orig.).
-
Directory of Open Access Journals (Sweden)
Gabriel Henrique Melo Nascimento Leite
2006-08-01
,20-0,30 m. Mesmo sob condições químicas adversas, em todos os tratamentos, o milho apresentou crescimento de raízes até 0,45 m de profundidade. O tratamento 100I apresentou maior crescimento de raízes até 0,15-0,20 m de profundidade do que os tratamentos com doses menores de calcário em superfície (50S e 25S, onde as raízes se concentraram na camada até 0,075 m. A incorporação do calcário proporcionou maior uniformidade na neutralização da acidez do solo em profundidade, o que se refletiu em maior quantidade de raízes até 0,45 m.In Rio Grande do Sul state, the area cultivated with under no-till system now amounts to 60 % of the total rain-fed cultivated area. However, there are still doubts as to crop practices in this soil conservation system, such as liming and fertilization as well as regarding root growth and crop productivity. The objective of this study was to evaluate the effects of lime doses and application forms on corn root development. The experiment was carried out in 1999/2000, in the experimental area of the Soil Science Department of the Federal University of Santa Maria, state of Rio Grande do Sul, Brazil, in a random block design in split plots, with four replications. The soil under study was a typical Hapludalf with 2 % slope. Main treatments were: no lime (SC, incorporation of 100 % of the recommended dose (100I, and 25 % (25S, 50 % (50S and 100 % (100S of the recommended dose (6.8 t ha-1 distributed over the soil surface. Lime was incorporated with conventional tillage in February 1996. Using the "nail board" method, with dimensions of 0,20 x 0,30 m, 0,30 x 0,45 m and 0,45 x 0,70 m, monoliths were taken from the soil profile, parallel to the corn sowing furrow, at 20, 54 and 80 days after corn emergence (DAE. The monoliths were carefully washed and the roots counted to establish a corn rooting profile in each treatment. Increasing lime doses applied on the soil surface (25S, 50S and 100S increased the depth at which elevations in p
-
Directory of Open Access Journals (Sweden)
Angel Freddy Godoy Viera
2007-01-01
Full Text Available A tecnologia de identificação por radiofreqüência (RFID é a mais nova tecnologia que, de forma acelerada, está sendo introduzida nas principais bibliotecas do mundo para a gestão eletrônica do acervo e implementação de serviços de auto-atendimento, entre outros serviços. Este artigo tem por objetivo apresentar os princípios de funcionamento da tecnologia RFID, seus componentes, as barreiras na adoção desta tecnologia e exemplos de iniciativas de implementação em bibliotecas. A metodologia utilizada foi a pesquisa bibliográfica e documental sobre a tecnologia RFID com aplicação em bibliotecas. Os resultados do trabalho mostram que esta tecnologia está se expandindo cada vez mais em nível mundial, no âmbito das bibliotecas. Conclui-se que a tecnologia RFID é uma das tecnologias de automação de bibliotecas que deve ser considerada na gestão eletrônica do acervo, tendo em vista às grandes vantagens que oferece.The Radio Frequency Identification Technology (RFID is the newest technology that is being introduced with force in the libraries, for electronic management of the collection, implementation of automated check-in and check-out services, among others. The objective of this is to presents the principles of operations of the RFID technology, their components, the barriers for the adoption of the RFID technology and examples of implementation in libraries. The methodology used in this article was an extensive bibliographical and documental research about RFID technology. The results shows thatthe RFID technology are expanding more and more, at world level, in the extent of the libraries, for the facilities that the technology supplies. It conclude that the RFID technology is one of the technologies for libraries automation that they should beconsidered in the hour of updating the technological infrastructure for electronic management of the collection in libraries, considering his crescent adoption at world level due
-
Web Development Technology-PHP. How It Is Related To Web Development Technology ASP.NET
Directory of Open Access Journals (Sweden)
Manya Sharma
2015-01-01
Full Text Available ABSTRACT This paper tells about the technologies used in PHP and how they are related to ASP.NET. The paper begin with the introduction of PHP defining what and how technologies has been used in development of User Complaint Web Application. How thistechnology is related to ASP.NET in features such as implementation functionality validation and proactive behavior involved in validating user input from the browser providing users feedback overall time consumed in development and maintenance.
-
Development of decontamination, decommissioning and environmental restoration technology
International Nuclear Information System (INIS)
Lee, Byung Jik; Kwon, H. S.; Kim, G. N. and others
1999-03-01
Through the project of D evelopment of decontamination, decommissioning and environmental restoration technology , the followings were studied. 1. Development of decontamination and repair technology for nuclear fuel cycle facilities 2. Development of dismantling technology 3. Development of environmental restoration technology. (author)
-
Hyatt, Mark J.; Abel, Phillip; Delaune, Paul; Fishman, Julianna; Kohli, Rajiv
2009-01-01
Mission architectures for human exploration of the lunar surface continue to advance as well as the definitions of capability needs, best practices and engineering design to mitigate the impact of lunar dust on exposed systems. The NASA DMP has been established as the agency focal point for dust characterization, technology, and simulant development. As described in this paper, the DMP has defined a process for selecting and justifying its R&T portfolio. The technology prioritization process, which is based on a ranking system according to weighted criteria, has been successfully applied to the current DMP dust mitigation technology portfolio. Several key findings emerged from this assessment. Within the dust removal and cleaning technologies group, there are critical technical challenges that must be overcome for these technologies to be implemented for lunar applications. For example, an in-situ source of CO2 on the moon is essential to the CO2 shower technology. Also, significant development effort is required to achieve technology readiness level TRL 6 for the electrostatic cleaning system for removal of particles smaller than 50 pm. The baseline materials related technologies require considerable development just to achieve TRL 6. It is also a nontrivial effort to integrate the materials in hardware for lunar application. At present, there are no terrestrial applications that are readily adaptable to lunar surface applications nor are there any obvious leading candidates. The unique requirements of dust sealing systems for lunar applications suggest an extensive development effort will be necessary to mature dust sealing systems to TRL 6 and beyond. As discussed here, several alternate materials and technologies have achieved high levels of maturity for terrestrial applications and warrant due diligence in ongoing assessment of the technology portfolio. The present assessment is the initial step in an ongoing effort to continually evaluate the DMP technology
-
International Nuclear Information System (INIS)
Liang, Sai; Zhang, Tianzhu
2011-01-01
Interactions of energy policies with water technology development in China are investigated using a hybrid input-output model and scenario analysis. The implementation of energy policies and water technology development can produce co-benefits for each other. Water saving potential of energy technology development is much larger than that of new energy exploitation. From the viewpoint of proportions of water saving co-benefits of energy policies, energy sectors benefit the most. From the viewpoint of proportions of energy saving and CO 2 mitigation co-benefits of water technology development, water sector benefits the most. Moreover, economic sectors are classified into four categories concerning co-benefits on water saving, energy saving and CO 2 mitigation. Sectors in categories 1 and 2 have big direct co-benefits. Thus, they can take additional responsibility for water and energy saving and CO 2 mitigation. If China implements life cycle materials management, sectors in category 3 can also take additional responsibility for water and energy saving and CO 2 mitigation. Sectors in category 4 have few co-benefits from both direct and accumulative perspectives. Thus, putting additional responsibility on sectors in category 4 might produce pressure for their economic development. -- Highlights: ► Energy policies and water technology development can produce co-benefits for each other. ► For proportions of water saving co-benefits of energy policies, energy sectors benefit the most. ► For proportions of energy saving and CO 2 mitigation co-benefits of water policy, water sector benefits the most. ► China’s economic sectors are classified into four categories for policy implementation at sector scale.
-
Innovative Technology Development Program. Final summary report
International Nuclear Information System (INIS)
Beller, J.
1995-08-01
Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Program. The plan is part of the DOE's program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE's clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process
-
Reference Gene Selection in the Desert Plant <em>Eremosparton songoricuem>m>
Directory of Open Access Journals (Sweden)
Dao-Yuan Zhang
2012-06-01
Full Text Available <em>Eremosparton songoricum em>(Litv. Vass. (<em>E. songoricumem> is a rare and extremely drought-tolerant desert plant that holds promise as a model organism for the identification of genes associated with water deficit stress. Here, we cloned and evaluated the expression of eight candidate reference genes using quantitative real-time reverse transcriptase polymerase chain reactions. The expression of these candidate reference genes was analyzed in a diverse set of 20 samples including various <em>E. songoricumem> plant tissues exposed to multiple environmental stresses. GeNorm analysis indicated that expression stability varied between the reference genes in the different experimental conditions, but the two most stable reference genes were sufficient for normalization in most conditions.<em> EsEFem> and <em>Esα-TUB> were sufficient for various stress conditions, <em>EsEF> and <em>EsACT> were suitable for samples of differing germination stages, and <em>EsGAPDH>and <em>Es
-
Development of ultrasensitive spectroscopic analysis technology
Energy Technology Data Exchange (ETDEWEB)
Cha, Hyung Ki; Song, K S; Kim, D H; Yang, K H; Jung, E C; Jeong, D Y; Yi, Y J; Lee, S M; Hong, K H; Han, J M; Yoo, B D; Rho, S P; Yi, J H; Park, H M; Cha, B H; Nam, S M; Lee, J M
1997-09-01
For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. (1) Laser resonance ionization technology, (2) Laser-induced rare isotope detection technology, (3) Laser-induced plasma analysis technology, (4) Microparticle analysis technology by using ion trap, (5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO{sub 2}, SO{sub 2}, etc. (author). 57 refs., 42 figs.
-
X-43 Hypersonic Vehicle Technology Development
Voland, Randall T.; Huebner, Lawrence D.; McClinton, Charles R.
2005-01-01
NASA recently completed two major programs in Hypersonics: Hyper-X, with the record-breaking flights of the X-43A, and the Next Generation Launch Technology (NGLT) Program. The X-43A flights, the culmination of the Hyper-X Program, were the first-ever examples of a scramjet engine propelling a hypersonic vehicle and provided unique, convincing, detailed flight data required to validate the design tools needed for design and development of future operational hypersonic airbreathing vehicles. Concurrent with Hyper-X, NASA's NGLT Program focused on technologies needed for future revolutionary launch vehicles. The NGLT was "competed" by NASA in response to the President s redirection of the agency to space exploration, after making significant progress towards maturing technologies required to enable airbreathing hypersonic launch vehicles. NGLT quantified the benefits, identified technology needs, developed airframe and propulsion technology, chartered a broad University base, and developed detailed plans to mature and validate hypersonic airbreathing technology for space access. NASA is currently in the process of defining plans for a new Hypersonic Technology Program. Details of that plan are not currently available. This paper highlights results from the successful Mach 7 and 10 flights of the X-43A, and the current state of hypersonic technology.
-
Development of Industrial Process Diagnosis and Measurement Technology
International Nuclear Information System (INIS)
Jung, Sung Hee; Kim, Jong Bum; Moon, Jin Ho
2010-04-01
Section 1. Industrial Gamma CT Technology for Process Diagnosis: The project is aimed to develop industrial process gamma tomography system for investigation on structural and physical malfunctioning and process media distribution by means of sealed gamma source and radioactive materials. Section 2. Development of RI Hydraulic Detection Technology for Industrial Application: The objectives in this study are to develop the evaluation technology of the hydrological characteristics and the hydraulic detection technology using radioisotope, and to analyze the hydrodynamics and pollutant transport in water environment like surface and subsurface. Section 3. Development of RT-PAT System for Powder Process Diagnosis: The objective of this project is the development of a new radiation technology to improve the accuracy of the determination of moisture content in a powder sample by using radiation source through the so-called RT-PAT (Radiation Technology-Process Analytical Technology), which is a new concept of converging technology between the radiation technology and the process analytical technology
-
Development of industrial process diagnosis and measurement technology
International Nuclear Information System (INIS)
Jung, Sunghee; Kim, Jongbum; Moon, Jinho; Suh, Kyungsuk; Kim, Jongyun
2012-04-01
Section1. Industrial Gamma CT Technology for Process Diagnosis The project is aimed to develop industrial process gamma tomography system for investigation on structural and physical malfunctioning and process media distribution by means of sealed gamma source and radioactive materials. Section2. Development of RI Hydraulic Detection Technology for Industrial Application The objectives in this study are to develop the evaluation technology of the hydrological characteristics and the hydraulic detection technology using radioisotope, and to analyze the hydrodynamics and pollutant transport in water environment like surface and subsurface. Section3. Development of RT-PAT System for Powder Process Diagnosis The objective of this project is the development of a new radiation technology to improve the accuracy of the determination of moisture content in a powder sample by using radiation source through the so-called RT-PAT (Radiation Technology-Process Analytical Technology), which is a new concept of converging technology between the radiation technology and the process analytical technology
-
Nigerian Journal of Technological Development
African Journals Online (AJOL)
The Nigerian Journal of Technological Development is now a quarterly publication of the Faculty of Engineering & Technology, University of Ilorin, Ilorin, Nigeria. ... to the subject matter as a Research Paper, Review Paper or a Technical Note.
-
Technology development multidimensional review for engineering and technology managers
Neshati, Ramin; Watt, Russell; Eastham, James
2014-01-01
Developing new products, services, systems, and processes has become an imperative for any firm expecting to thrive in today’s fast-paced and hyper-competitive environment. This volume integrates academic and practical insights to present fresh perspectives on new product development and innovation, showcasing lessons learned on the technological frontier. The first part emphasizes decision making. The second part focuses on technology evaluation, including cost-benefit analysis, material selection, and scenarios. The third part features in-depth case studies to present innovation management tools, such as customer needs identification, technology standardization, and risk management. The fourth part highlights important international trends, such as globalization and outsourcing. Finally the fifth part explores social and political aspects.
-
Decontamination Technology Development for Nuclear Research Facilities
International Nuclear Information System (INIS)
Oh, Won Zin; Jung, Chong Hun; Choi, Wang Kyu; Won, Hui Jun; Kim, Gye Nam
2004-02-01
Technology development of surface decontamination in the uranium conversion facility before decommissioning, technology development of component decontamination in the uranium conversion facility after decommissioning, uranium sludge treatment technology development, radioactive waste soil decontamination technology development at the aim of the temporary storage soil of KAERI, Optimum fixation methodology derivation on the soil and uranium waste, and safety assessment methodology development of self disposal of the soil and uranium waste after decontamination have been performed in this study. The unique decontamination technology applicable to the component of the nuclear facility at room temperature was developed. Low concentration chemical decontamination technology which is very powerful so as to decrease the radioactivity of specimen surface under the self disposal level was developed. The component decontamination technology applicable to the nuclear facility after decommissioning by neutral salt electro-polishing was also developed. The volume of the sludge waste could be decreased over 80% by the sludge waste separation method by water. The electrosorption method on selective removal of U(VI) to 1 ppm of unrestricted release level using the uranium-containing lagoon sludge waste was tested and identified. Soil decontamination process and equipment which can reduce the soil volume over 90% were developed. A pilot size of soil decontamination equipment which will be used to development of real scale soil decontamination equipment was designed, fabricated and demonstrated. Optimized fixation methodology on soil and uranium sludge was derived from tests and evaluation of the results. Safety scenario and safety evaluation model were development on soil and uranium sludge aiming at self disposal after decontamination
-
Abreu,Paulo Giovanni de; Baêta,Fernando da Costa; Abreu,Valéria Maria Nascimento; Soares,Paulo Rubens; Perdomo,Carlos Cláudio; Silva,Martinho de Almeida e
2000-01-01
RESUMO - Este experimento foi realizado em duas fases para estudar o efeito de diferentes sistemas de aquecimento em piso sobre os desempenhos produtivo e bioeconômico de frangos de corte. Um total de 500 pintos de um dia, 50% macho e 50% fêmea, em cada círculo de proteção, foi distribuído em um delineamento experimental em blocos casualizados, com sete tratamentos e quatro blocos. Os sistemas de aquecimento testados foram: placa de fibra de vidro sem cobertura de lona plástica; placa de fibr...
-
Mars Technology Program Planetary Protection Technology Development
Lin, Ying
2006-01-01
The objectives of the NASA Planetary Protection program are to preserve biological and organic conditions of solar-system bodies for future scientific exploration and to protect the Earth from potential hazardous extraterrestrial contamination. As the exploration of solar system continues, NASA remains committed to the implementation of planetary protection policy and regulations. To fulfill this commitment, the Mars Technology Program (MTP) has invested in a portfolio of tasks for developing necessary technologies to meet planetary protection requirements for the next decade missions.
-
Technology-enhanced simulation in emergency medicine: a systematic review and meta-analysis.
Ilgen, Jonathan S; Sherbino, Jonathan; Cook, David A
2013-02-01
Technology-enhanced simulation is used frequently in emergency medicine (EM) training programs. Evidence for its effectiveness, however, remains unclear. The objective of this study was to evaluate the effectiveness of technology-enhanced simulation for training in EM and identify instructional design features associated with improved outcomes by conducting a systematic review. The authors systematically searched MEDLINE, EMBASE, CINAHL, ERIC, PsychINFO, Scopus, key journals, and previous review bibliographies through May 2011. Original research articles in any language were selected if they compared simulation to no intervention or another educational activity for the purposes of training EM health professionals (including student and practicing physicians, midlevel providers, nurses, and prehospital providers). Reviewers evaluated study quality and abstracted information on learners, instructional design (curricular integration, feedback, repetitive practice, mastery learning), and outcomes. From a collection of 10,903 articles, 85 eligible studies enrolling 6,099 EM learners were identified. Of these, 56 studies compared simulation to no intervention, 12 compared simulation with another form of instruction, and 19 compared two forms of simulation. Effect sizes were pooled using a random-effects model. Heterogeneity among these studies was large (I(2) ≥ 50%). Among studies comparing simulation to no intervention, pooled effect sizes were large (range = 1.13 to 1.48) for knowledge, time, and skills and small to moderate for behaviors with patients (0.62) and patient effects (0.43; all p 0.1). Qualitative comparisons of different simulation curricula are limited, although feedback, mastery learning, and higher fidelity were associated with improved learning outcomes. Technology-enhanced simulation for EM learners is associated with moderate or large favorable effects in comparison with no intervention and generally small and nonsignificant benefits in comparison
-
Energy Technology Data Exchange (ETDEWEB)
Chae, Jong Seo; Lee, Dong Hoon; Kim, You Seok; Park, Chan Won; Lee, Yong Min; Hong, Sung Seok; Lee, Min Yong
1995-12-01
The first cyclotron in Korea, MC-59 cyclotron is used for neutron irradiation, radionuclide development, production and material and biomedical research. 50.5MeV and 35MeV proton beam have been extracted with 20-70 .mu.A. A total of beam extraction time are 1095.7 hours. 206.5 hours are used for the developments and 663.8 hours are for radionuclide production and development and 225.4 hours for application researches. The shutdown days are 23days. Fundamental data for failure decrement and efficient beam extraction were composed and maintenance technologies were developed. (author). 8 tabs., 17 figs., 10 refs.
-
International Nuclear Information System (INIS)
Chae, Jong Seo; Lee, Dong Hoon; Kim, You Seok; Park, Chan Won; Lee, Yong Min; Hong, Sung Seok; Lee, Min Yong.
1995-12-01
The first cyclotron in Korea, MC-59 cyclotron is used for neutron irradiation, radionuclide development, production and material and biomedical research. 50.5MeV and 35MeV proton beam have been extracted with 20-70 .mu.A. A total of beam extraction time are 1095.7 hours. 206.5 hours are used for the developments and 663.8 hours are for radionuclide production and development and 225.4 hours for application researches. The shutdown days are 23days. Fundamental data for failure decrement and efficient beam extraction were composed and maintenance technologies were developed. (author). 8 tabs., 17 figs., 10 refs
-
Technologies for a sustainable development; Technologies pour un developpement durable
Energy Technology Data Exchange (ETDEWEB)
NONE
2002-07-01
The European Event on Technology (EET), a recurrent annual event since 1992, is a major meeting opportunity for researchers and engineers as well as private and public decision-makers, on technologies, their evolution and their industrial and social implications. In less than a decade, sustainable development has become both an economic and a political priority. It was urgent and legitimate that those who are the mainsprings should take hold of the subject and give it technological content, estimate its costs and define clear timetables. The debates consist of: plenary sessions on environmental, social and economic stakes of sustainable development and the challenges for, and commitment of engineers, managers and politicians with respect to these goals; and workshops, which provide an overview of recently acquired or upcoming technologies developed by sector: energy, transports, new information technologies, new industrial manufacturing technologies (materials, products, services), waste management, global environment monitoring, water management, bio-technologies, and innovation management. This document brings together the different talks given by the participants. Among these, the following ones fall into the energy and environment scope: energy efficiency of buildings: towards energy autonomy; superconductors enable in new millennium for electric power industry; advanced gas micro-turbine-driven generator technology; environmental and technical challenges of an offshore wind farm; future nuclear energy systems; modelling combustion in engines: progress and prospects for reducing emissions; on-board computers: reduction in consumption and emissions of engine-transmission units for vehicles; polymer-lithium batteries: perspectives for zero-emission traction; hybrid vehicles and energy/environmental optimization: paths and opportunities; fuel cells and zero-emission: perspectives and developments; global change: causes, modeling and economic issues; the GMES
-
Brief introduction of nuclear power plant emergency system EmInfoSys
International Nuclear Information System (INIS)
Xiao Yuhua; Zhao Zhigang
2014-01-01
Nuclear safety is the lifeline of nuclear energy and nuclear technology, nuclear accident emergency response is the last line of nuclear security defense, and is one of the important measures to ensure the healthy development of the nuclear energy safety. The establishment of complete function, sensitive reaction and efficient emergency management system for operation of nuclear and radiation accidents is an important task of nuclear security. From 2001 China Techenergy Co., Ltd. participated in the Qinshan, Tianwan, Ministry of Environmental Protection, Haiyang, Taishan, Fangchenggang, Sanmen, etc. nuclear emergency projects, and the nuclear emergency EmInfoSys (emergency management information system) platform was developed with independent intellectual property rights. A brief introduction about EmInfoSys system was performed in this paper. (authors)
-
Social and Technological Development in Context
DEFF Research Database (Denmark)
Koch, Christian
1997-01-01
This papers studies the processes developing technology and its social "sorroundings", the social networks. Positions in the debate on technological change is discussed. A central topic is the enterprise external development and decision processes and their interplay with the enterprise internal...
-
Directory of Open Access Journals (Sweden)
Patricia Torres
2012-12-01
demonstra que é uma tecnologia consolidada, com eficiências de redução entre 65 % e 80 % de DQO e TRH entre 6 e 10 horas. No entanto, é necessário continuar avançando na melhoria e aperfeiçoamento dos atuais métodos de tratamento que permitam soluções tecnológicas respeitosas com o ambiente e adequadas às condições socioeconômicas e culturais próprias de cada região. Este documento propõe uma análise e reflexão sobre o tratamento anaeróbio de esgotos domésticos em países em desenvolvimento e sobre as perspectivas de aplicação em pequena e grande escala.Appropriate and sustainable municipal wastewater treatments plants -WWTP- are strongly required in developing countries which face both sanitation problems and poverty. Anaerobic digestion, as a leading technology that generates value added products (i.e. bio-energy, nutrients and water for reuse has proved to be suitable in those countries, which are mostly placed in tropical and subtropical regions with temperatures higher than 20 °C. Latin America is the region with the highest number of anaerobic WWTP, being the UASB reactor the most common technology for municipal wastewater treatment. Onça WWTP (Belo Horizonte, Brazil is an example of a large scale implementation, showing that UASB is a stabilized technology with COD removal efficiencies ranging from 65 % to 80 % and HRT between 6-10 hours. However, further research is highly needed in order to improve and upgrade the existing treatment methods; so as to achieve technological solutions that prove to be environmentally harmless and suitable to each particular socio-economic and cultural condition. This work is aimed at analyzing and discussing the anaerobic treatment of domestic wastewater issues and its application perspectives at both small and large scale in developing countries.
-
Directory of Open Access Journals (Sweden)
Susana Cristine Siebeneichler
2008-01-01
Full Text Available Um fator importante na determinação da sobrevivência de uma espécie, é sua adaptação à condição de alta ou baixa luminosidade. O objetivo deste estudo foi verificar o desenvolvimento inicial, teores de clorofila e alocação de biomassa em plantas de Tabebuia heptaphyilla (Vell. Tol, em três condições de luminosidade. O experimento foi conduzido em delineamento de blocos casualizados, com três níveis de luminosidade (pleno sol, 50% de luz e sombra natural e com 15 repetições em cada tratamento, sendo cada planta considerada como uma repetição. Foram avaliados a altura e diâmetro aos 60, 82, 103, 124, 145 dias após a emergência das plântulas. Plantas expostas ao ambiente de sombra natural apresentaram menor desempenho vegetativo do que as demais condições de cultivo testadas (50% e 100% de luminosidade. A condição de 50% de luminosidade pode ser recomendada para a formação de mudas, no entanto, essa prática também pode ser realizada a pleno sol.Important factor in determining species survival, for example, its adaptability to high or low conditions of luminosity. The objective of this study was to verify the initial development, chlorophyll content, and biomass allocation in plants of Tabebuia heptaphyilla (vell. tol., in three lighting conditions. The experiment was carried out in randomized complete blocks, with three levels of luminosity (full sunlight, 50% of light, and natural shade and 15 repetitions of each treatment, and each plant considered as a repetition. The height and diameter were studied on 60, 82, 103, 124, 145 days after the emergence of the plants. Plants exposed in the shade showed lower vegetation performance than the other conditions tested (50% and 100% of RFA. The 50% luminosity, as well as full sunlight, can be recommended for the formation of seedlings.
-
PLGA 50:50 nanoparticles of paclitaxel: Development, in vitro anti ...
Indian Academy of Sciences (India)
lation of novel drug delivery systems to deliver such extreme hydrophobic drug. ... drug delivery system for PTX using biodegradable PLGA. 50:50 .... To this, 200 μl of protein precipitat- ..... Murthy R R 2004 The AAPS Journal 6 Article 23.
-
Technology transfer for development
International Nuclear Information System (INIS)
Abraham, D.
1990-07-01
The IAEA has developed a multifaceted approach to ensure that assistance to Member States results in assured technology transfer. Through advice and planning, the IAEA helps to assess the costs and benefits of a given technology, determine the basic requirements for its efficient use in conditions specific to the country, and prepare a plan for its introduction. This report describes in brief the Technical Co-operation Programmes
-
Lutwack, R.
1974-01-01
A technical assessment of a program to develop photovoltaic power system technology for large-scale national energy applications was made by analyzing and judging the alternative candidate photovoltaic systems and development tasks. A program plan was constructed based on achieving the 10 year objective of a program to establish the practicability of large-scale terrestrial power installations using photovoltaic conversion arrays costing less than $0.50/peak W. Guidelines for the tasks of a 5 year program were derived from a set of 5 year objectives deduced from the 10 year objective. This report indicates the need for an early emphasis on the development of the single-crystal Si photovoltaic system for commercial utilization; a production goal of 5 x 10 to the 8th power peak W/year of $0.50 cells was projected for the year 1985. The developments of other photovoltaic conversion systems were assigned to longer range development roles. The status of the technology developments and the applicability of solar arrays in particular power installations, ranging from houses to central power plants, was scheduled to be verified in a series of demonstration projects. The budget recommended for the first 5 year phase of the program is $268.5M.
-
In Situ Remediation Integrated Program: FY 1994 program summary
International Nuclear Information System (INIS)
1995-04-01
The US Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of the Office of Environmental Management (EM) in November 1989. In an effort to focus resources and address priority needs, EM-50 introduced the concept of integrated programs (IPs) and integrated demonstrations (IDs). The In Situ Remediation Integrated Program (ISR IP) focuses research and development on the in-place treatment of contaminated environmental media, such as soil and groundwater, and the containment of contaminants to prevent the contaminants from spreading through the environment. Using in situ remediation technologies to clean up DOE sites minimizes adverse health effects on workers and the public by reducing contact exposure. The technologies also reduce cleanup costs by orders of magnitude. This report summarizes project work conducted in FY 1994 under the ISR IP in three major areas: treatment (bioremediation), treatment (physical/chemical), and containment technologies. Buried waste, contaminated soils and groundwater, and containerized waste are all candidates for in situ remediation. Contaminants include radioactive waste, volatile and nonvolatile organics, heavy metals, nitrates, and explosive materials
-
In Situ Remediation Integrated Program: FY 1994 program summary
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-04-01
The US Department of Energy (DOE) established the Office of Technology Development (EM-50) as an element of the Office of Environmental Management (EM) in November 1989. In an effort to focus resources and address priority needs, EM-50 introduced the concept of integrated programs (IPs) and integrated demonstrations (IDs). The In Situ Remediation Integrated Program (ISR IP) focuses research and development on the in-place treatment of contaminated environmental media, such as soil and groundwater, and the containment of contaminants to prevent the contaminants from spreading through the environment. Using in situ remediation technologies to clean up DOE sites minimizes adverse health effects on workers and the public by reducing contact exposure. The technologies also reduce cleanup costs by orders of magnitude. This report summarizes project work conducted in FY 1994 under the ISR IP in three major areas: treatment (bioremediation), treatment (physical/chemical), and containment technologies. Buried waste, contaminated soils and groundwater, and containerized waste are all candidates for in situ remediation. Contaminants include radioactive waste, volatile and nonvolatile organics, heavy metals, nitrates, and explosive materials.
-
Development of Risk Management Technology/Development of Risk-Informed Application Technology
Energy Technology Data Exchange (ETDEWEB)
Yang, Joon Eon; Kim, K. Y.; Ahn, K. I.; Lee, Y. H.; Lim, H. G.; Jung, W. S.; Choi, S. Y.; Han, S. J.; Ha, J. J.; Hwang, M. J.; Park, S. Y.; Yoon, C
2007-06-15
This project aims at developing risk-informed application technologies to enhance the safety and economy of nuclear power plant altogether. For this, the Integrated Level 1 and 2 PSA model is developed. In addition, the fire and internal flooding PSA models are improved according to the PSA standard of U.S.A. To solve the issues of domestic PSA model, the best-estimate thermal hydraulic analyses are preformed for the ATWS and LSSB. In order to reduce the uncertainty of PSA, several new PSA technologies are developed: (1) more exact quantification of large fault tree, (2) importance measure including the effects of external PSA. As feasibility studies of Option 2 and 3, the class of 6 systems' SSC are re-classified based on the risk information and the sensitivity analyses is performed for the EDG starting time, respectively. It is also improved that the methodology to identify the vital area of NPP. The research results of this project can be used in the regulatory body and the industry projects for risk-informed applications.
-
Development of Risk Management Technology/Development of Risk-Informed Application Technology
International Nuclear Information System (INIS)
Yang, Joon Eon; Kim, K. Y.; Ahn, K. I.; Lee, Y. H.; Lim, H. G.; Jung, W. S.; Choi, S. Y.; Han, S. J.; Ha, J. J.; Hwang, M. J.; Park, S. Y.; Yoon, C.
2007-06-01
This project aims at developing risk-informed application technologies to enhance the safety and economy of nuclear power plant altogether. For this, the Integrated Level 1 and 2 PSA model is developed. In addition, the fire and internal flooding PSA models are improved according to the PSA standard of U.S.A. To solve the issues of domestic PSA model, the best-estimate thermal hydraulic analyses are preformed for the ATWS and LSSB. In order to reduce the uncertainty of PSA, several new PSA technologies are developed: (1) more exact quantification of large fault tree, (2) importance measure including the effects of external PSA. As feasibility studies of Option 2 and 3, the class of 6 systems' SSC are re-classified based on the risk information and the sensitivity analyses is performed for the EDG starting time, respectively. It is also improved that the methodology to identify the vital area of NPP. The research results of this project can be used in the regulatory body and the industry projects for risk-informed applications
-
New developments in PET detector technology
International Nuclear Information System (INIS)
Niu Lingxin; Zhao Shujun; Zhang Bin; Liu Haojia
2010-01-01
The researches on PET detector are always active and innovative area. The research direction of PET detector includes improving performances of scintillator-based detectors, investigating new detectors suitable for multi-modality imaging (e.g. PET/CT and PET/MRI), meeting requirements of TOF and DOI technologies and boosting the development of the technologies. In this paper, new developments in PET detector technology about scintillation crystal, photodetector and semiconductor detector is introduced. (authors)
-
Energy Technology Data Exchange (ETDEWEB)
Queiroz, Paulo Cesar Beltrao [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), Sao Paulo, SP (Brazil)], e-mail: paulocbqueiroz@gmail.com; Zouain, Desiree Moraes [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: dmzouain@ipen.br
2009-08-15
This paper analyzes both the carbon fiber-based development for uranium centrifuges and the research project that supports its development effort over time. The carbon fibre-based engineering properties make it a valuable supply for high technological products, such as uranium ultracentrifuge. There is no production of such fibers in Brazil. Its trade is subject to international market restrictions due to carbon fibers' dual applications. The Centro Tecnologico da Marinha em Sao Paulo (CTMSP), the Universidade de Campinas (UNICAMP), the Universidade de Sao Paulo (USP), the RADICIFIBRAS Company, and the Financiadora de Estudos e Projetos (FINEP), which is responsible for the project financial support, established a partnership aiming the development of a domestic polyacrylonitrile (Pan)-based carbon fiber industry. Such alliances or technological partnerships are best known in developed countries, such as USA and Japan, as Cooperative Research or Research Joint Ventures (RJV). (author)
-
Development of Technological Profiles for Transfer of Energy- and Resource Saving Technologies
Directory of Open Access Journals (Sweden)
Lysenko, V.S.
2015-01-01
Full Text Available The article deals with the methodological foundations for the development of technological profiles for «System of Transfer of Energy- and Resource Saving Technologies». It is determined that a compliance with the methodology and standards of the European network «Relay Centers» (Innovation Relay Centers — IRC network, since 2008 — EEN, the Russian Technology Transfer Network RTTN and Uk rainian Technology Transfer Network UTTN is the main pri nciple of the development process of technological requests and offers.
-
Advancing CANDU technology AECL's Development program
International Nuclear Information System (INIS)
Torgerson, D.F.
1997-01-01
AECL has a comprehensive product development program that is advancing all aspects of CANDU technology including fuel and fuel cycles, fuel channels, heavy water and tritium technology, safety technology, components and systems, constructability, health and environment, and control and instrumentation. The technology arising from these programs is being incorporated into the CANDU design through an evolutionary process. This evolutionary process is focused on improving economics, enhancing safety and ensuring fuel cycle flexibility to secure fuel supply for the foreseeable future. This strategic thrusts are being used by CANDU designers and researchers to set priorities and goals for AECL's development activities. The goals are part of a 25-year development program that culminates in the 'CANDU X'. The 'CANDU X' is not a specific design - it is a concept that articulates our best extrapolation of what is achievable with the CANDU design over the next 25 years, and includes the advanced features arising from the R and D and engineering to be done over that time. AECL's current product, the 700 MWe class CANDU 6 and the 900 MWe class CANDU 9, both incorporate output from the development programs as the technology become available. A brief description of each development areas is given below. The paper ends with the conclusion that AECL has a clear vision of how CANDU technology and products will evolve over the next several years, and has structured a comprehensive development program to take full advantage of the inherent characteristics of heavy water reactors. (author)
-
Integrating Product and Technology Development
DEFF Research Database (Denmark)
Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.
2016-01-01
.g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...
-
MIxed Waste Integrated Program (MWIP): Technology summary
International Nuclear Information System (INIS)
1994-02-01
The mission of the Mixed Waste Integrated Program (MWIP) is to develop and demonstrate innovative and emerging technologies for the treatment and management of DOE's mixed low-level wastes (MLLW) for use by its customers, the Office of Waste Operations (EM-30) and the Office of Environmental Restoration (EM-40). The primary goal of MWIP is to develop and demonstrate the treatment and disposal of actual mixed waste (MMLW and MTRU). The vitrification process and the plasma hearth process are scheduled for demonstration on actual radioactive waste in FY95 and FY96, respectively. This will be accomplished by sequential studies of lab-scale non-radioactive testing followed by bench-scale radioactive testing, followed by field-scale radioactive testing. Both processes create a highly durable final waste form that passes leachability requirements while destroying organics. Material handling technology, and off-gas requirements and capabilities for the plasma hearth process and the vitrification process will be established in parallel
-
Complete BWR--EM LOCA analysis using the WRAP--EM system
International Nuclear Information System (INIS)
Beckmeyer, R.R.; Gregory, M.V.; Buckner, M.R.
1979-01-01
The Water Reactor Analysis Package, Evaluation Model (WRAP--EM), provides a complete analysis of postulated loss-of-coolant accidents (LOCA's) in light--water nuclear power reactors. The system is being developed at the Savannah River Laboratory (SRL) for use by the Nuclear Regulatory Commission (NRC) to interpret and evaluate reactor vendor, evaluation model (EM) analyses. The initial version of the WRAP--EM system for analysis of boiling water reactors (BWR's) is operational. To demonstrate the complete capability of the WRAP--BWR--EM system, a LOCA analysis has been performed for the Hope Creek Plant
-
International Nuclear Information System (INIS)
Oh, Won Zin; Lee, K. W.; Won, H. J.; Jung, C. J.; Choi, W. K.; Kim, G. N.; Moon, J. K.
2001-04-01
The followings were studied through the project entitled 'Dry Decontamination Technology Development for Highly Radioactive Contaminants'. 1.Contaminant Characteristics Analysis of Domestic Nuclear Fuel Cycle Projects(NFCP) and Applicability Study of the Unit Dry-Decontamination Techniques A. Classification of contaminated equipments and characteristics analysis of contaminants B. Applicability study of the unit dry-decontamination techniques 2.Performance Evaluation of Unit Dry Decontamination Technique A. PFC decontamination technique B. CO2 decontamination technique C. Plasma decontamination technique 3.Development of Residual Radiation Assessment Methodology for High Radioactive Facility Decontamination A. Development of radioactive nuclide diffusion model on highly radioactive facility structure B. Obtainment of the procedure for assessment of residual radiation dose 4.Establishment of the Design Concept of Dry Decontamination Process Equipment Applicable to Highly Radioactive Contaminants 5.TRIGA soil unit decontamination technology development A. Development of soil washing and flushing technologies B. Development of electrokinetic soil decontamination technology
-
Development of IT-based data communication network technology
International Nuclear Information System (INIS)
Hong, Seok Boong; Jeong, K. I.; Yoo, Y. R.
2010-10-01
- Developing broadband high-reliability real-time communications technology for NPP - Developing reliability and performance validation technology for communications network - Developing security technology for NPP communications network - Developing field communications network for harsh environment of NPP - International standard registration(Oct. 28, 2009, IEC 61500
-
Reflector Technology Development and System Design for Concentrating Solar Power Technologies
Energy Technology Data Exchange (ETDEWEB)
Adam Schaut
2011-12-30
performance. The target criteria for the concept development was to achieve a solar field cost savings of 25%-50% thereby meeting or exceeding the DOE solar field cost savings target of $350/m2. After evaluating various structural design approaches, Alcoa down-selected to a monocoque, dubbed Wing Box, design that utilizes the reflective surface as a structural, load carrying member. The cost and performance potential of the Wing Box concept was developed via initial finite element analysis (FEA) and cost modeling. The structural members were sized through material utilization modeling when subjected to representative loading conditions including wind loading. Cost modeling was utilized to refine potential manufacturing techniques that could be employed to manufacture the structural members. Alcoa concluded that an aluminum intensive collector design can achieve significant cost savings without sacrificing performance. Based on the cost saving potential of this Concept Feasibility study, Alcoa recommended further validation of this CSP approach through the execution of Phase II: Design and Prototype Development. Alcoa Phase II objective was to provide the DOE with a validated CSP trough design that demonstrates significant overall system cost savings without sacrificing performance. Phase II consisted of three major tasks; Detail System Design, Prototype Build, and System Validation. Additionally, the reflector surface development that began in Phase I was continued in Phase II. After further development work, Alcoa was unable to develop a reflective technology that demonstrated significant performance or cost benefits compared to commercially available CSP reflective products. After considering other commercially available reflective surfaces, Alcoa selected Alano's MIRO-SUN product for use on the full scale prototype. Although MIRO-SUN has a lower specular reflectivity compared to other options, its durability in terms of handling, cleaning, and long-term reflectivity
-
Directory of Open Access Journals (Sweden)
Roseane Rodrigues de Souza
2010-12-01
Full Text Available O boro desempenha funções importantes em processos biológicos das plantas, como a síntese e estruturação da parede celular, lignificação, metabolismo e transporte de carboidratos, além de participar da divisão e diferenciação celular em tecidos meristemáticos. No entanto, as necessidades nutricionais para o cultivo de copo-de-leite, especialmente de boro, ainda são pouco conhecidas. Assim, objetivou-se avaliar os efeitos de diferentes doses de boro no crescimento e desenvolvimento, teor e acúmulo desse nutriente em plantas de copo-de-leite cultivadas em solução nutritiva. Mudas micropropagadas foram submetidas aos tratamentos com as doses de 0,05; 0,25; 0,50; 0,75; 1,00 e 2,00 mg L-1 de boro em solução nutritiva de Hoagland & Arnon diluída a 30% de sua força iônica. O delineamento experimental foi o inteiramente casualizado, com dez repetições. As plantas não manifestaram sintomas visuais de deficiência ou de toxidez de boro, no entanto, o sistema radicular das plantas cultivadas na dose de 0,05 mg L-1 de boro apresentou-se com o crescimento reduzido. A melhor dose para o desenvolvimento adequado de plantas de copo-de-leite em solução nutritiva é de 1,20 mg L-1 de boro.Boron has essential functions in plant biological processes such as cell wall synthesis and structuralization, lignification, carbohydrates metabolism and transport. This element also acts in cell division and differentiation in meristematic tissues. However, the nutritional needs for calla lily cultivation, and especially boron needs, are still poorly known. Thus, the objective of this work was to evaluate the effects of different boron doses on growth and development, content and accumulation of boron in calla lily plants grown in a nutrient solution. Micropropagated seedlings were submitted to treatments with the doses 0.05; 0.25; 0.50; 0.75; 1.00 and 2.00 mg L-1 boron in Hoagland & Arnon nutrient solution diluted to 30% of its ionic force. The
-
Foreign cooperative technology development and transfer
International Nuclear Information System (INIS)
Schassburger, R.J.; Robinson, R.A.
1988-01-01
It is the policy of the US Department of Energy (DOE) that, in pursuing the development of mined geologic repositories in the United States, the waste isolation program will continue to actively support international cooperation and exchange activities that are judged to be in the best interest of the program and in compliance with the Nuclear Waste Policy Act of 1982, Sec. 223. Because there are common technical issues and because technology development often requires large expenditures of funds and dedication of significant capital resources, it is advantageous to cooperate with foreign organizations carrying out similar activities. The DOE's Office of Civilian Radioactive Waste Management is working on cooperative nuclear waste isolation technology development programs with the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA), Canada's Atomic Energy of Canada, Limited (AECL), Sweden, Switzerland, and the Federal Republic of Germany. This paper describes recent technology results that have been obtained in DOE's foreign cooperative programs. Specific technology development studies are discussed for cooperative efforts with Canada, OECD/NEA, and a natural analog project in Brazil
-
Directory of Open Access Journals (Sweden)
Raymond L. Goldsteen
1990-12-01
Full Text Available A discussion of health policy in developing countries is presented. It argues that developing countries must adopt a progressive approach to health policy which rejects the two-tiered system of public and private health care. However, it also points out that ideology is not sufficient to maintain support. A progressive health system must utilize administrative and social and behavioral sciences to achieve effectiveness and efficiency in health care delivery. It cannot ignore these goals any more than a private health care system can.É discutida a política de saúde em países em desenvolvimento. Defende-se a proposta de que esses países devem adotar uma abordagem progressista quanto a sua política de saúde, rejeitando o sistema que se apoia em dois pilares - o da saúde pública e privada. Salienta-se que a ideologia não pode ser seu único sustentáculo. Um sistema de saúde progressista deve utilizar as ciências administrativas, sociais e comportamentais na formulação e implementação do conjunto de seus programas e propostas, para que possa servir à população de modo eficaz. O sistema de saúde pública não pode se eximir em relação a meta da eficácia.
-
Directory of Open Access Journals (Sweden)
Adriano Tony Ramos
2007-12-01
Full Text Available O carcinoma de células escamosas (CCE é um tumor maligno dos queratinócitos. O desenvolvimento desse tipo de tumor está associado a muitos fatores, incluindo a exposição prolongada à luz ultravioleta, falta de pigmento na epiderme, perda de pêlos ou cobertura de pêlos muito esparsa nos locais afetados. Realizou-se um estudo retrospectivo dos casos de carcinoma de células escamosas em animais de produção (bovinos, ovinos e eqüinos de 1978 a 2002. O material foi obtido nos arquivos do Laboratório Regional de Diagnóstico da Faculdade de Veterinária da Universidade Federal de Pelotas. Os 50 tumores do tipo carcinoma de células escamosas estavam distribuídos nas diferentes espécies (bovina: 30; ovina: sete e eqüina: 13. Dados como raça, sexo, idade e localização corpórea, dentro de cada espécie, foram tabulados. Classificaram-se os tumores segundo seu grau de malignidade em bem diferenciados a pobremente diferenciados, através de avaliação histológica. A etiologia multifatorial dos cce em animais de produção requer mais estudos retrospectivos e prospectivos, para determinar o papel de cada fator na patogênese desse neoplasma.
-
Key technological challenges for JSFR development
International Nuclear Information System (INIS)
Morishita, Masaki; Nakai, Ryodai; Aoto, Kazumi
2008-01-01
JSFR is a sodium cooled loop type fast reactor on which a conceptual design study is now underway in the framework of 'Fast Reactor Cycle Technology Development Project (FaCT project)' of Japan. Achieving economic competitiveness with future light water reactors, along with assuring high level of safety and reliability, is among the most crucial development targets. A number of innovative technologies are pursued for these purposes. A two loop primary heat transfer system (PHTS) design, integration of a main circulation pump and an intermediate heat exchanger (IHX) into one single component, and adoption of high chrome ferritic steel as a structural material are typical technologies mainly for economic purposes. A passive shutdown system, decay heat removal by natural convection, and re-criticality free core configuration are those for mainly safety enhancement purposes. Technically challenging issues inevitably accompany these innovative technologies, and a systematic research and development program is undertaken for resolving these issues and realization of the plant design. An overall picture will be given in this paper on the design concept of JSFR that will be followed by descriptions on the major innovative technologies and their relevant research and development activities. (author)
-
Titanium Aluminide Casting Technology Development
Bünck, Matthias; Stoyanov, Todor; Schievenbusch, Jan; Michels, Heiner; Gußfeld, Alexander
2017-12-01
Titanium aluminide alloys have been successfully introduced into civil aircraft engine technology in recent years, and a significant order volume increase is expected in the near future. Due to its beneficial buy-to-fly ratio, investment casting bears the highest potential for cost reduction of all competing production technologies for TiAl-LPTB. However, highest mechanical properties can be achieved by TiAl forging. In view of this, Access e.V. has developed technologies for the production of TiAl investment cast parts and TiAl die cast billets for forging purposes. While these parts meet the highest requirements, establishing series production and further optimizing resource and economic efficiency are present challenges. In order to meet these goals, Access has recently been certified according to aircraft standards, aiming at qualifying parts for production on technology readiness level 6. The present work gives an overview of the phases of development and certification.
-
International Nuclear Information System (INIS)
Erickson, T.A.
1998-01-01
The objectives of this task are to: Develop a model (paper) to estimate the cost and waste generation of cleanup within the Environmental Management (EM) complex; Identify technologies applicable to decontamination and decommissioning (D and D) operations within the EM complex; Develop a database of facility information as linked to project baseline summaries (PBSs). The above objectives are carried out through the following four subtasks: Subtask 1--D and D Model Development, Subtask 2--Technology List; Subtask 3--Facility Database, and Subtask 4--Incorporation into a User Model
-
Energy Technology Data Exchange (ETDEWEB)
Erickson, T.A.
1998-11-01
The objectives of this task are to: Develop a model (paper) to estimate the cost and waste generation of cleanup within the Environmental Management (EM) complex; Identify technologies applicable to decontamination and decommissioning (D and D) operations within the EM complex; Develop a database of facility information as linked to project baseline summaries (PBSs). The above objectives are carried out through the following four subtasks: Subtask 1--D and D Model Development, Subtask 2--Technology List; Subtask 3--Facility Database, and Subtask 4--Incorporation into a User Model.
-
The DOE safeguards and security technology development program
International Nuclear Information System (INIS)
Cherry, R.C.; Wheelock, A.J.
1991-01-01
This paper reports that strategic planning for safeguards and security within the Department of Energy emphasizes the contributions of advanced technologies to the achievement of Departmental protection program goals. The Safeguards and Security Technology Development Program provides state-of-the-art technologies, systems and technical services in support of the policies and programmatic requirements for the protection of Departmental assets. The Program encompasses research and development in physical security, nuclear material control and accountability, information security and personnel security, and the integration of these disciplines in advanced applications. Technology development tasks serve goals that range from the maintenance of an effective technology base to the development, testing and evaluation of applications to meet field needs. A variety of factors, from the evolving threat to reconfiguration of the DOE complex and the technical requirements of new facilities, are expected to influence safeguards and security technology requirements and development efforts. Implementation of the Program is based on the systematic identification, prioritization and alignment of technology development tasks and needs. Initiatives currently underway are aimed at enhancing technology development project management. Increased management attention is also being placed on efforts to promote the benefits of the Program through technology transfer and interagency liaison
-
Energy consumption and technological developments
International Nuclear Information System (INIS)
Okorokov, V.R.
1990-02-01
The paper determines an outline of the world energy prospects based on principal trends of the development of energy consumption analysed over the long past period. According to the author's conclusion the development of energy systems will be determined in the nearest future (30 - 40 years) by contemporary energy technologies based on the exploitation of traditional energy resources but in the far future technologies based on the exploitation of thermonuclear and solar energy will play the decisive role. (author)
-
International Nuclear Information System (INIS)
Ebadian, M.A.; Boudreaux, J.F.
1998-01-01
The purpose of this two-year investigation is to field test innovative technologies for coating and surface removal on concrete floors and compare the compiled data to baseline technologies, thereby ensuring that the best and most cost-effective options are developed and subsequently used during the decontamination and decommissioning (D and D) of U.S. Department of Energy Environmental Management (DOE-EM) sites. Comprehensive and comparable data will be collected in the areas of health and safety, operations, and secondary waste management. The technologies tested will include DOE-EM funded technologies and commercial non-nuclear technologies that have the potential to meet the environmental restoration objectives. This report summarizes the activities performed during Fiscal Year 1996 (FY96) and describes the planned activities for Fiscal Year 1997 (FY97). Accomplishments for FY96 include the completion of preparatory work to begin field testing of innovative technologies. A total of seven technologies will be tested during FY97. As a part of this project, interactive computer software will be developed during FY97, allowing site-specific parameters and technology performance data to be considered when determining the best option given site-specific conditions
-
Development of a space-flight ADR providing continuous cooling at 50 mK with heat rejection at 10 K
Tuttle, James; Canavan, Edgar; DeLee, Hudson; DiPirro, Michael; Jahromi, Amir; James, Bryan; Kimball, Mark; Shirron, Peter; Sullivan, Dan; Switzer, Eric
2017-12-01
Future astronomical instruments will require sub-Kelvin detector temperatures to obtain high sensitivity. In many cases large arrays of detectors will be used, and the associated cooling systems will need performance surpassing the limits of present technologies. NASA is developing a compact cooling system that will lift heat continuously at temperatures below 50 mK and reject it at over 10 K. Based on adiabatic demagnetization refrigerators (ADRs), it will have high thermodynamic efficiency and vibration-free operation with no moving parts. It will provide more than 10 times the current flight ADR cooling power at 50 mK and will also continuously cool a 4 K stage for instruments and optics. In addition, it will include an advanced magnetic shield resulting in external field variations below 5 μT. We describe the cooling system here and report on the progress in its development.
-
Novel neutralized-beam intense neutron source for fusion technology development
International Nuclear Information System (INIS)
Osher, J.E.; Perkins, L.J.
1983-01-01
We describe a neutralized-beam intense neutron source (NBINS) as a relevant application of fusion technology for the type of high-current ion sources and neutral beamlines now being developed for heating and fueling of magnetic-fusion-energy confinement systems. This near-term application would support parallel development of highly reliable steady-state higher-voltage neutral D 0 and T 0 beams and provide a relatively inexpensive source of fusion neutrons for materials testing at up to reactor-like wall conditions. Beam-target examples described incude a 50-A mixed D-T total (ions plus neutrals) space-charge-neutralized beam at 120 keV incident on a liquid Li drive-in target, or a 50-A T 0 + T + space-charge-neutralized beam incident on either a LiD or gas D 2 target with calculated 14-MeV neutron yields of 2 x 10 15 /s, 7 x 10 15 /s, or 1.6 x 10 16 /s, respectively. The severe local heat loading on the target surface is expected to limit the allowed beam focus and minimum target size to greater than or equal to 25 cm 2
-
Directory of Open Access Journals (Sweden)
Giovanni Ferrara
1992-07-01
Full Text Available Abstract In a lot of Barn Owl's pellets from the Murge plateau a specimen of <em>Sorex> sp. was detected. Thank to some morphological and morphometrical features, the cranial bones can be tentatively attributed to <em>Sorex samniticusem> Altobello, 1926. The genus <em>Sorex> was not yet included in the Apulia's fauna southwards of the Gargano district; the origin and significance of the above record is briefly discussed, the actual presence of a natural population of <em>Sorex> in the Murge being not yet proved. Riassunto Viene segnalato il rinvenimento di un esemplare di <em>Sorex> cfr. <em>samniticus> da borre di <em>Tyto albaem> delle Murge. Poiché il genere non era stato ancora segnalato nella Puglia a sud del Gargano, viene discusso il significato faunistico del reperto.
-
Directory of Open Access Journals (Sweden)
Lizarazo H. Karol
2008-12-01
Full Text Available
El gusano cogollero <em>Spodoptera frugiperdaem> es una de las plagas que más afectan los cultivos en la región de Sumapaz (Cundinamarca, Colombia. En la actualidad se controla principalmente aplicando productos de síntesis química, sin embargo la aplicación de extractos vegetales surge como una alternativa de menor impacto sobre el ambiente. Este control se emplea debido a que las plantas contienen metabolitos secundarios que pueden inhibir el desarrollo de los insectos. Por tal motivo, la presente investigación evaluó el efecto insecticida y antialimentario de extractos vegetales de barbasco <em>Polygonum hydropiperoidesem> (Polygonaceae, carbonero <em>Calliandra pittieriem> (Mimosaceae y hierba mora <em>Solanum nigrumem> (Solanaceae sobre larvas de <em>S. frugiperdaem> biotipo maíz. Se estableció una cría masiva del insecto en el laboratorio utilizando una dieta natural con hojas de maíz. Posteriormente se obtuvieron extractos vegetales utilizando solventes de alta polaridad (agua y etanol y media polaridad (diclorometano los cuales se aplicaron sobre las larvas de segundo instar. Los resultados más destacados se presentaron con extractos de <em>P. hydropiperoidesem>, obtenidos con diclorometano en sus diferentes dosis, con los cuales se alcanzó una mortalidad de 100% 12 días después de la aplicación y un efecto antialimentario representado por un consumo de follaje de maíz inferior al 4%, efectos similares a los del testigo comercial (Clorpiriphos.
-
Technology-development needs for magnetic fusion
International Nuclear Information System (INIS)
Stacey, W.M. Jr.; Baker, C.C.; Conn, R.W.; Krakowski, R.A.; Steiner, D.; Thomassen, K.I.
1983-03-01
The technology-development needs for magnetic fusion have been identified from an assessment of the conceptual design studies which have been performed. A summary of worldwide conceptual design effort is presented. The relative maturity of the various confinement concepts and the intensity and continuity of the design efforts are taken into account in identifying technology development needs. A major conclusion of this study is that there is a high degree of commonality among the technology requirements identified for the various confinement concepts
-
Overcoming regulatory barriers: DOE environmental technology development program
International Nuclear Information System (INIS)
Kurtyka, B.M.; Clodfelter-Schumack, K.; Evans, T.T.
1995-01-01
The potential to improve environmental conditions via compliance or restoration is directly related to the ability to produce and apply innovative technological solutions. However, numerous organizations, including the US General Accounting Office (GAO), the EPA National Advisory Council for Environmental Policy and Technology (NACEPT), the DOE Environmental Management Advisory Board (EMAB), and the National Science and Technology Council (NSTC) have determined that significant regulatory barriers exist that inhibit the development and application of these technologies. They have noted the need for improved efforts in identifying and rectifying these barriers for the purpose of improving the technology development process, providing innovative alternatives, and enhancing the likelihood of technology acceptance by all. These barriers include, among others, regulator and user bias against ''unknown/unproven'' technologies; multi-level/multi-media permit disincentives; potential liability of developers and users for failed implementation; wrongly defined or inadequate data quality objectives: and lack of customer understanding and input. The ultimate goal of technology development is the utilization of technologies. This paper will present information on a number of regulatory barriers hindering DOE's environmental technology development program and describe DOE efforts to address these barriers
-
Are EM's communication tools effective? Evaluation research of two EM publications
International Nuclear Information System (INIS)
Wight, Evelyn; Gardner, Gene; Harvey, Tony
1992-01-01
As a reflection of its growing culture of openness, and in response to the public's need for accurate information about its activities, the U.S. Department of Energy (DOE) Office of the Assistant Secretary for Environmental Restoration and Waste Management (EM) has increased the amount of information available to the public through communication tools such as brochures, fact sheets, and a travelling exhibit with an interactive computer display. Our involvement with this effort has been to design, develop, and critique booklets, brochures, fact sheets and other communication tools for EM. This paper presents an evaluation of the effectiveness of two communication tools we developed: the EM Booklet and the EM Fact Sheets. We measured effectiveness using non-parametric testing. This paper describes DOE's culture change, EM's communication tools and their context within DOE'S new open culture, our research, test methods and results, the significance of our research, and our plans for future research. (author)
-
Development of environmental radiation control technology
International Nuclear Information System (INIS)
Kim, Ingyu; Kim, Enhan; Keum, Dongkwon
2012-04-01
To develop the comprehensive environmental radiation management technology, - An urban atmospheric dispersion model and decision-aiding model have been developed. - The technologies for assessing the radiation impact to non-human biota and the environmental medium contamination have developed. - The analytical techniques of the indicator radionuclides related to decommissioning of nuclear facilities and nuclear waste repository have been developed. - The national environmental radiation impact has been assessed, and the optimum management system of natural radiation has been established
-
Transfer of radiation technology to developing countries
Markovic, Vitomir; Ridwan, Mohammad
1993-10-01
Transfer of technology is a complex process with many facets, options and constraints. While the concept is an important step in bringing industrialization process to agricultural based countries, it is clear, however, that a country will only benefit from a new technology if it addresses a real need, and if it can be absorbed and adapted to suit the existing cultural and technological base. International Atomic Energy Agency, as UN body, has a mandate to promote nuclear applicationsand assist Member States in transfer of technology for peaceful applications. This mandate has been pursued by many different mechanisms developed in the past years: technical assistance, coordinated research programmes, scientific and technical meetings, publications, etc. In all these activities the Agency is the organizer and initiator, but main contributions come from expert services from developed countries and, increasingly, from developing countries themselves. The technical cooperation among developing coutries more and more becomes part of different programmes. In particular, regional cooperation has been demonstrated as an effective instrument for transfer of technology from developed and among developing countries. Some examples of actual programmes are given.
-
Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.
1992-01-01
The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.
-
EMI Architecture and Technology Development Plan
Balazs, K.
2013-01-01
This document provides a brief overview of the EMI architecture and the technology development directions presented by the four EMI technology areas and by EMI partners. The report represents the final revision of EMI technology planning covering a time period beyond the project end.
-
Biofuel technologies. Recent developments
Energy Technology Data Exchange (ETDEWEB)
Gupta, Vijai Kumar [National Univ. of Ireland Galway (Ireland). Dept. of Biochemistry; MITS Univ., Rajasthan (India). Dept. of Science; Tuohy, Maria G. (eds.) [National Univ. of Ireland Galway (Ireland). Dept. of Biochemistry
2013-02-01
Written by experts. Richly illustrated. Of interest to both experienced researchers and beginners in the field. Biofuels are considered to be the main potential replacement for fossil fuels in the near future. In this book international experts present recent advances in biofuel research and related technologies. Topics include biomethane and biobutanol production, microbial fuel cells, feedstock production, biomass pre-treatment, enzyme hydrolysis, genetic manipulation of microbial cells and their application in the biofuels industry, bioreactor systems, and economical processing technologies for biofuel residues. The chapters provide concise information to help understand the technology-related implications of biofuels development. Moreover, recent updates on biofuel feedstocks, biofuel types, associated co- and byproducts and their applications are highlighted. The book addresses the needs of postgraduate researchers and scientists across diverse disciplines and industrial sectors in which biofuel technologies and related research and experimentation are pursued.
-
Hanford science and technology needs statements document
Energy Technology Data Exchange (ETDEWEB)
Piper, L.L.
1997-12-31
This document is a compilation of the Hanford science and technology needs statements for FY 1998. The needs were developed by the Hanford Site Technology Coordination Group (STCG) with full participation and endorsement of site user organizations, stakeholders, and regulators. The purpose of this document is to: (a) provide a comprehensive listing of Hanford science and technology needs, and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community. The Hanford STCG reviews and updates the needs annually. Once completed, the needs are communicated to DOE for use in the development and prioritization of their science and technology programs, including the Focus Areas, Cross-Cutting Programs, and the Environmental Management Science Program. The needs are also transmitted to DOE through the Accelerating Cleanup: 2006 Plan. The public may access the need statements on the Internet on: the Hanford Home Page (www.hanford.gov), the Pacific Rim Enterprise Center`s web site (www2.pacific-rim.org/pacific rim), or the STCG web site at DOE headquarters (em-52.em.doegov/ifd/stcg/stcg.htm). This page includes links to science and technology needs for many DOE sites. Private industry is encouraged to review the need statements and contact the Hanford STCG if they can provide technologies that meet these needs. On-site points of contact are included at the ends of each need statement. The Pacific Rim Enterprise Center (206-224-9934) can also provide assistance to businesses interested in marketing technologies to the DOE.
-
Directory of Open Access Journals (Sweden)
E. V. Sibirskaya
2018-01-01
Full Text Available Russia, having lost a significant part of a high-tech industrial complex during the reforms (1993–2000, sharply reducing the state support of scientific research and development, has turned into a power dependent on the conjuncture in the hydrocarbon energy market and from foreign sup-plies of technologies, consumption goods, including those necessary for life support, thus being on the "technological needle". The main factor of development was the resource-producing complex. This situation had a negative impact on the pace of the country's development, on its defense capability and created real prerequisites for the loss of technological, economic, and, in the long run, political sovereignty and disintegration of the state. Nevertheless, the availability of natural resources along with human capi-tal and geographic location is a global competitive advantage of theRussian Federation, and the task is to use this advantage maximally as one of the first echelon countries in the emerging world order. One of the most important tasks was the search for such a direction of technological devel-opment that allows, on the one hand, to preserve Russia's position in the world market of traditional products; on the other – to strengthen positions in the markets of products with a higher degree of processing of Russian raw materials (oil and gas complex and agro-industrial complex; and finally – to master new "growth points" (services, new markets, talents, technologies in the world market of high-tech products and services. The set tasks assume several solutions. First, scientific and technological development should be based on the strategy of scientific and technological development of theRussian Federationand the national technological initiative, as it sets both resource constraints and priorities in the needs of the economy in new products and new technological solutions. Secondly,Russiashould take into account existing and emerging trends in the
-
A Lunar Surface System Supportability Technology Development Roadmap
Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.
2011-01-01
This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set
-
NASA Astrophysics Funds Strategic Technology Development
Seery, Bernard D.; Ganel, Opher; Pham, Bruce
2016-01-01
The COR and PCOS Program Offices (POs) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions. For example, the SAT program is expected to fund key technology developments needed to close gaps identified by Science and Technology Definition Teams (STDTs) planned to study several large mission concept studies in preparation for the 2020 Decadal Survey.The POs are guided by the National Research Council's "New Worlds, New Horizons in Astronomy and Astrophysics" Decadal Survey report, NASA's Astrophysics Implementation Plan, and the visionary Astrophysics Roadmap, "Enduring Quests, Daring Visions." Strategic goals include dark energy, gravitational waves, and X-ray observatories. Future missions pursuing these goals include, e.g., US participation in ESA's Euclid, Athena, and L3 missions; Inflation probe; and a large UV/Optical/IR (LUVOIR) telescope.To date, 65 COR and 71 PCOS SAT proposals have been received, of which 15 COR and 22 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2/BICEP3/Keck to measure polarization in the CMB signal; advanced UV reflective coatings implemented on the optics of GOLD and ICON, two heliophysics Explorers; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and
-
Souza, Luis Eugenio Portela Fernandes de
2016-11-03
The relationships between health and socioeconomic development are diverse. These relationships find in the health economic complex a privileged ground for expression. The importance of health technologies increased exponentially since the middle of the 20th century, affecting health systems in terms of both, quality of care and economic aspects. In fact, the predominant model of care is based on fragmented, symptomatic therapy practices that encourages the use of products and services and promotes a passive participation of users rather than humanization of care. Overcoming this model requires changes in the health technology standards which, in turn, require changes in the technology standard of society. The critical theory of technology helps to understand the evolution of the industrial civilization. It enriches the discussion by suggesting the health economic complex be more sensibly adjusted to the requirements of comprehensive health care, and to inclusive and sustainable development. Resumo: As relações entre a saúde e o desenvolvimento socioeconômico são múltiplas. Essas relações têm o complexo econômico da saúde como o espaço privilegiado de sua expressão. A importância das tecnologias de saúde aumentou exponencialmente desde meados do século XX, com efeitos sobre os sistemas de saúde, tanto em qualidade da atenção, quanto em aspectos econômicos. Na realidade, predomina um modelo de atenção caracterizado por práticas fragmentadas, que enfatizam tratamentos sintomáticos, estimulam o consumismo de produtos e serviços e promovem, ao invés da humanização, uma participação passiva dos usuários. A superação desse modelo passa pela mudança do padrão tecnológico da saúde, que, por sua vez, exige a transformação do padrão tecnológico da sociedade. A teoria crítica da tecnologia ajuda a compreender a evolução da civilização industrial. Enriquece o debate, sugerindo uma conformação do complexo econômico da saúde mais
-
Mixed Waste Integrated Program -- Problem-oriented technology development
International Nuclear Information System (INIS)
Hart, P.W.; Wolf, S.W.; Berry, J.B.
1994-01-01
The Mixed Waste Integrated Program (MWIP) is responding to the need for DOE mixed waste treatment technologies that meet these dual regulatory requirements. MWIP is developing emerging and innovative treatment technologies to determine process feasibility. Technology demonstrations will be used to determine whether processes are superior to existing technologies in reducing risk, minimizing life-cycle cost, and improving process performance. Technology development is ongoing in technical areas required to process mixed waste: materials handling, chemical/physical treatment, waste destruction, off-gas treatment, final forms, and process monitoring/control. MWIP is currently developing a suite of technologies to process heterogeneous waste. One robust process is the fixed-hearth plasma-arc process that is being developed to treat a wide variety of contaminated materials with minimal characterization. Additional processes encompass steam reforming, including treatment of waste under the debris rule. Advanced off-gas systems are also being developed. Vitrification technologies are being demonstrated for the treatment of homogeneous wastes such as incinerator ash and sludge. An alternative to conventional evaporation for liquid removal--freeze crystallization--is being investigated. Since mercury is present in numerous waste streams, mercury removal technologies are being developed
-
Textile technology development
Shah, Bharat M.
1995-01-01
The objectives of this report were to evaluate and select resin systems for Resin Transfer Molding (RTM) and Powder Towpreg Material, to develop and evaluate advanced textile processes by comparing 2-D and 3-D braiding for fuselage frame applications and develop window belt and side panel structural design concepts, to evaluate textile material properties, and to develop low cost manufacturing and tooling processes for the automated manufacturing of fuselage primary structures. This research was in support of the NASA and Langley Research Center (LaRc) Advanced Composite Structural Concepts and Materials Technologies for Primary Aircraft Structures program.
-
Directory of Open Access Journals (Sweden)
Angela Sikorski Santos
2006-01-01
Full Text Available O objetivo geral desta pesquisa foi identificar as competências demandadas aos bibliotecários tendo em vista a implantação de tecnologias de informação em Bibliotecas Universitárias. O estudo do fenômeno ocorreu por meio do estudo de casos (multicasos, predominantemente qualitativos, com a coleta de dados primários (entrevistas e observação e secundários (documentos. Os resultados demonstram que houve impactos decorrentes da introdução de tecnologias de informação, mas que as entrevistadas não verificaram impactos maiores em decorrência da preparação para o uso das tecnologias. Quanto a demanda de competências que devem ser desenvolvidas com a introdução de novas tecnologias da informação, as bibliotecárias entrevistadas destacaram as seguintes: trabalho em equipe, saber gerenciar recursos humanos, ser dinâmica, compartilhar informações, ter um conjunto de habilidades, aptidões, atitudes e comportamentos para colocar em prática tudo o que se sabe com eficiência e eficácia.The general objective of this research was to identify the abilities demanded to the librarians in view of the implantation of technologies of information in University Libraries. The study of the phenomenon it occurred by means of the study of cases (multicases, predominantly qualitative, with the collection of primary data (interviews and comment and secondary (documents. The results demonstrate that it had decurrent impacts of the introduction of information technologies, but that the interviewed ones had not verified bigger impacts in result of the preparation for the use of the technologies. How much the demand of abilities that must be developed with the introduction of new technologies of the information, the interviewed librarians had detached the following ones: work in team, to know to manage human resources, to be dynamic, to share information, to have a set of abilities, aptitudes, attitudes and behaviors to place in practical
-
A New Natural Lactone from <em>Dimocarpus> <em>longan> Lour. Seeds
Directory of Open Access Journals (Sweden)
Zhongjun Li
2012-08-01
Full Text Available A new natural product named longanlactone was isolated from <em>Dimocarpus> <em>longan> Lour. seeds. Its structure was determined as 3-(2-acetyl-1<em>H>-pyrrol-1-yl-5-(prop-2-yn-1-yldihydrofuran-2(3H-one by spectroscopic methods and HRESIMS.
-
Fusion development and technology
International Nuclear Information System (INIS)
Montgomery, D.B.
1992-01-01
This report discusses the following: superconducting magnet technology; high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies--aries; ITER physics: alpha physics and alcator R ampersand D for ITER; lower hybrid current drive and heating in the ITER device; ITER superconducting PF scenario and magnet analysis; ITER systems studies; and safety, environmental and economic factors in fusion development
-
Information Communication Technology Planning in Developing Countries
Malapile, Sandy; Keengwe, Jared
2014-01-01
This article explores major issues related to Information Communication Technology (ICT) in education and technology planning. Using the diffusion of innovation theory, the authors examine technology planning opportunities and challenges in Developing countries (DCs), technology planning trends in schools, and existing technology planning models…
-
Development of advanced neutron beam technology
Energy Technology Data Exchange (ETDEWEB)
Seong, B S; Lee, J S; Sim, C M [and others
2007-06-15
The purpose of this work is to timely support the national science and technology policy through development of the advanced application techniques for neutron spectrometers, built in the previous project, in order to improve the neutron spectrometer techniques up to the world-class level in both quantity and quality and to reinforce industrial competitiveness. The importance of the research and development (R and D) is as follows: 1. Technological aspects - Development of a high value-added technology through performing the advanced R and D in the broad research areas from basic to applied science and from hard to soft condensed matter using neutron scattering technique. - Achievement of an important role in development of the new technology for the following industries aerospace, defense industry, atomic energy, hydrogen fuel cell etc. by the non-destructive inspection and analysis using neutron radiography. - Development of a system supporting the academic-industry users for the HANARO facility 2. Economical and Industrial Aspects - Essential technology in the industrial application of neutron spectrometer, in the basic and applied research of the diverse materials sciences, and in NT, BT, and IT areas - Broad impact on the economics and the domestic and international collaborative research by using the neutron instruments in the mega-scale research facility, HANARO, that is a unique source of neutron in Korea. 3. Social Aspects - Creating the scientific knowledge and contributing to the advanced industrial society through the neutron beam application - Improving quality of life and building a national consensus on the application of nuclear power by developing the RT fusion technology using the HANARO facility. - Widening the national research area and strengthening the national R and D capability by performing advanced R and D using the HANARO facility.
-
Development of advanced neutron beam technology
International Nuclear Information System (INIS)
Seong, B. S.; Lee, J. S.; Sim, C. M.
2007-06-01
The purpose of this work is to timely support the national science and technology policy through development of the advanced application techniques for neutron spectrometers, built in the previous project, in order to improve the neutron spectrometer techniques up to the world-class level in both quantity and quality and to reinforce industrial competitiveness. The importance of the research and development (R and D) is as follows: 1. Technological aspects - Development of a high value-added technology through performing the advanced R and D in the broad research areas from basic to applied science and from hard to soft condensed matter using neutron scattering technique. - Achievement of an important role in development of the new technology for the following industries aerospace, defense industry, atomic energy, hydrogen fuel cell etc. by the non-destructive inspection and analysis using neutron radiography. - Development of a system supporting the academic-industry users for the HANARO facility 2. Economical and Industrial Aspects - Essential technology in the industrial application of neutron spectrometer, in the basic and applied research of the diverse materials sciences, and in NT, BT, and IT areas - Broad impact on the economics and the domestic and international collaborative research by using the neutron instruments in the mega-scale research facility, HANARO, that is a unique source of neutron in Korea. 3. Social Aspects - Creating the scientific knowledge and contributing to the advanced industrial society through the neutron beam application - Improving quality of life and building a national consensus on the application of nuclear power by developing the RT fusion technology using the HANARO facility. - Widening the national research area and strengthening the national R and D capability by performing advanced R and D using the HANARO facility
-
Cyrogenic Life Support Technology Development Project
Bush, David R.
2015-01-01
KSC has used cryogenic life support (liquid air based) technology successfully for many years to support spaceflight operations. This technology has many benefits unique to cryogenics when compared to traditional compressed gas systems: passive cooling, lighter, longer duration, and lower operating pressure. However, there are also several limiting factors that have prevented the technology from being commercialized. The National Institute of Occupational Safety and Health, Office of Mine Safety and Health Research (NIOSH-OMSHR) has partnered with NASA to develop a complete liquid air based life support solution for emergency mine escape and rescue. The project will develop and demonstrate various prototype devices and incorporate new technological innovations that have to date prevented commercialization.
-
Advances in Robotic Servicing Technology Development
Gefke, Gardell G.; Janas, Alex; Pellegrino, Joseph; Sammons, Matthew; Reed, Benjamin
2015-01-01
NASA's Satellite Servicing Capabilities Office (SSCO) has matured robotic and automation technologies applicable to in-space robotic servicing and robotic exploration over the last six years. This paper presents the progress of technology development activities at the Goddard Space Flight Center Servicing Technology Center and on the ISS, with an emphasis on those occurring in the past year. Highlighted advancements are design reference mission analysis for servicing in low Earth orbit (LEO) and asteroid redirection; delivery of the engineering development unit of the NASA Servicing Arm; an update on International Space Station Robotic Refueling Mission; and status of a comprehensive ground-based space robot technology demonstration expanding in-space robotic servicing capabilities beginning fall 2015.
-
Directory of Open Access Journals (Sweden)
Yijun Fan
2012-07-01
Full Text Available A water-soluble polysaccharide (BEBP was extracted from <em>Boletus edulis em>Bull using hot water extraction followed by ethanol precipitation. The polysaccharide BEBP was further purified by chromatography on a DEAE-cellulose column, giving three major polysaccharide fractions termed BEBP-1, BEBP-2 and BEBP-3. In the next experiment, the average molecular weight (Mw, IR and monosaccharide compositional analysis of the three polysaccharide fractions were determined. The evaluation of antioxidant activities both <em>in vitroem> and <em>in vivo em>suggested that BEBP-3 had good potential antioxidant activity, and should be explored as a novel potential antioxidant.
-
Development of high burnup nuclear fuel technology
International Nuclear Information System (INIS)
Suk, Ho Chun; Kang, Young Hwan; Jung, Jin Gone; Hwang, Won; Park, Zoo Hwan; Ryu, Woo Seog; Kim, Bong Goo; Kim, Il Gone
1987-04-01
The objectives of the project are mainly to develope both design and manufacturing technologies for 600 MWe-CANDU-PHWR-type high burnup nuclear fuel, and secondly to build up the foundation of PWR high burnup nuclear fuel technology on the basis of KAERI technology localized upon the standard 600 MWe-CANDU- PHWR nuclear fuel. So, as in the first stage, the goal of the program in the last one year was set up mainly to establish the concept of the nuclear fuel pellet design and manufacturing. The economic incentives for high burnup nuclear fuel technology development are improvement of fuel utilization, backend costs plant operation, etc. Forming the most important incentives of fuel cycle costs reduction and improvement of power operation, etc., the development of high burnup nuclear fuel technology and also the research on the incore fuel management and safety and technologies are necessary in this country
-
Transmutation Technology Development
Energy Technology Data Exchange (ETDEWEB)
Song, T. Y.; Park, W. S.; Kim, Y. H. (and others)
2007-06-15
The spent fuel coming from the PWR is one of the most difficult problems to be solved for the continuous use of nuclear power. It takes a few million years to be safe under the ground. Therefore, it is not easy to take care of the spent fuel for such a long time. Transmutation technology is the key technology which can solve the spent fuel problem basically. Transmutation is to transmute long-lived radioactive nuclides in the spent fuel into short-lived or stable nuclide through nuclear reactions. The long-lived radioactive nuclides can be TRU and fission products such as Tc-99 and I-129. Although the transmutation technology does not make the underground disposal totally unnecessary, the period to take care of the spent fuel can be reduced to the order of a few hundred years. In addition to the environmental benefit, transmutation can be considered to recycle the energy in the spent fuel since the transmutation is performed through nuclear fission reaction of the TRU in the spent fuel. Therefore, transmutation technology is worth being developed in economical aspect. The results of this work can be a basis for the next stage research. The objective of the third stage research was to complete the core conceptual design and verification of the key technologies. The final results will contribute to the establishment of Korean back end fuel cycle policy by providing technical guidelines.
-
History of nuclear technology development in Japan
Energy Technology Data Exchange (ETDEWEB)
Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp [Visiting Professor, at the Faculty of Petroleum and Renewable Energy Engineering, University Teknologi Malaysia Johor Bahru 81310 (Malaysia); General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195 (Japan)
2015-04-29
Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.
-
History of nuclear technology development in Japan
Yamashita, Kiyonobu
2015-04-01
Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.
-
History of nuclear technology development in Japan
International Nuclear Information System (INIS)
Yamashita, Kiyonobu
2015-01-01
Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident
-
Ocean Technology Development Tank
Federal Laboratory Consortium — The new SWFSC laboratory in La Jolla incorporates a large sea- and fresh-water Ocean Technology Development Tank. This world-class facility expands NOAA's ability to...
-
Technological capacity as an element of development strategy
Energy Technology Data Exchange (ETDEWEB)
Weiss, C; Kamenetzky, M; Ramesh, J
1980-03-01
The idea that science and technology transfers would result in the development of indigenous infrastructures able to cope with social problems overlooked the costs and uncertainties of applying science and technology to modernizing industry. A local capacity to deal with development is not emerging in developing countries and the role of small-scale technology has been largely ignored. A technological capacity needs to be built from within the public and private sectors, with adequate financial and technical support for small production units and adequate sheltering for long-term problems. Public policies are needed which can assess the fitness of technological institutions and policies to develop a capacity for making technological decisions that are compatible with local supply. 12 references. (DCK)
-
Directory of Open Access Journals (Sweden)
Marta Magi
2010-06-01
Full Text Available Abstract During 2004-2005 and 2007-2008, 189 foxes (<em>Vulpes vulpesem> and 6 badgers (<em>Meles melesem> were collected in different areas of Central Northern Italy (Piedmont, Liguria and Tuscany and examined for <em>Angiostrongylus vasorumem> infection. The prevalence of the infection was significantly different in the areas considered, with the highest values in the district of Imperia (80%, Liguria and in Montezemolo (70%, southern Piedmont; the prevalence in Tuscany was 7%. One badger collected in the area of Imperia turned out to be infected, representing the first report of the parasite in this species in Italy. Further studies are needed to evaluate the role played by fox populations as reservoirs of infection and the probability of its spreading to domestic dogs.
Riassunto <em>Angiostrongylus vasorumem> nella volpe (<em>Vulpes vulpesem> e nel tasso (<em>Meles melesem> in Italia centro-settentrionale. Nel 2004-2005 e 2007-2008, 189 volpi (<em>Vulpes vulpesem> e 6 tassi (<em>Meles melesem> provenienti da differenti aree dell'Italia settentrionale e centrale (Piemonte, Liguria Toscana, sono stati esaminati per la ricerca di <em>Angiostrongylus vasorumem>. La prevalenza del nematode è risultata significativamente diversa nelle varie zone, con valori elevati nelle zone di Imperia (80% e di Montezemolo (70%, provincia di Cuneo; la prevalenza in Toscana è risultata del 7%. Un tasso proveniente dall'area di Imperia è risultato positivo per A. vasorum; questa è la prima segnalazione del parassita in tale specie in Italia. Ulteriori studi sono necessari per valutare il potenziale della volpe come serbatoio e la possibilità di diffusione della parassitosi ai cani domestici.
doi:10.4404/hystrix-20.2-4442 -
Developing countries: small technology with big effects
International Nuclear Information System (INIS)
McRobie, G.; Carr, M.
1978-01-01
As far the poor countries of the world are concerned, during the past twenty years they have had access only to the technologies developed by the rich to suit the rich. It is now beyond question that some of the most daunting problems confronting the majority of the worlds populations stem directly from the kind of technology transferred to them under current aid and development programs. That the technology of the rich is generally inappropriate to meet the needs and resources of the poor countries is becoming more widley recognized both by aid-givers and aid-receivers. Yet it is this technology that continues to be almost exclusively and most powerfully promoted in the developing countries. To meet their needs a new technology must be discovered or devised: one that lies between the sickle and the combine harvester and is small, simple and cheap enough to harmonise withlocal human and material resources and lends itself to widespread reproduction with the minimum of outside help. What we now need most urgently is a new set of technologies, designed, by people who are informed by the need to develop capital-saving technologies capable of being decentralized to the maximum extend. The technology gap is not only wide, but the knowledge an resources required to fill is, although they exist in the industrialized countries, have not been mobilized to provide the right kind of knowledge and to make it available to those who need it. It was to do this that the Intermediate Technology Development Group was set up ten years ago. (orig.) 891 HP 892 EKI [de
-
International Nuclear Information System (INIS)
Saaty, R.P.; Showalter, W.E.; Booth, S.R.
1995-01-01
In Situ Bioremediation (ISBR) is an innovative new remediation technology for the removal of chlorinated solvents from contaminated soils and groundwater. The principal contaminant at the SRID is the volatile organic compound (VOC), tricloroetylene(TCE). A 384 day test run at Savannah River, sponsored by the US Department of Energy, Office of Technology Development (EM-50), furnished information about the performance and applications of ISBR. In Situ Bioremediation, as tested, is based on two distinct processes occurring simultaneously; the physical process of in situ air stripping and the biolgoical process of bioremediation. Both processes have the potential to remediate some amount of contamination. A quantity of VOCs, directly measured from the extracted air stream, was removed from the test area by the physical process of air stripping. The biological process is difficult to examine. However, the results of several tests performed at the SRID and independent numerical modeling determined that the biological process remediated an additional 40% above the physical process. Given this data, the cost effectiveness of this new technology can be evaluated
-
Vitamina A em dieta de juvenis de pacu cultivados em tanques-rede
Directory of Open Access Journals (Sweden)
Arcangelo Augusto Signor
2013-08-01
Full Text Available O objetivo deste trabalho foi avaliar o efeito da suplementação de vitamina A na alimentação de juvenis de pacu cultivados em tanques-rede. Foram utilizados 2.000 peixes, com peso inicial médio de 66,93±15,03 g, distribuídos em delineamento inteiramente casualizado, em 20 tanques-rede de 5,0 m³, com cinco tratamentos e quatro repetições. As rações foram formuladas com 0, 3.000, 6.000, 9.000 e 12.000 UI de vitamina A por quilograma de dieta, por meio da suplementação com acetato de retinol. O arraçoamento foi realizado às 8:30, 13:30 e 17:30 h, até a saciedade aparente dos animais. Não foram observadas diferenças quanto aos parâmetros de desempenho produtivo, rendimento e composição química da carcaça, e aos parâmetros hematológicos e lipídios no fígado dos peixes que foram alimentados com diferentes níveis de vitamina A. A suplementação de vitamina A em dietas para juvenis de pacu criados em tanques-rede não influencia o desempenho produtivo dos peixes.
-
CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES
Energy Technology Data Exchange (ETDEWEB)
Hugh W. Rimmer
2004-05-12
This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.
-
Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Technology Development Overview
Hughes, Stephen J.; Cheatwood, F. McNeil; Calomino, Anthony M.; Wright, Henry S.; Wusk, Mary E.; Hughes, Monica F.
2013-01-01
The successful flight of the Inflatable Reentry Vehicle Experiment (IRVE)-3 has further demonstrated the potential value of Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. This technology development effort is funded by NASA's Space Technology Mission Directorate (STMD) Game Changing Development Program (GCDP). This paper provides an overview of a multi-year HIAD technology development effort, detailing the projects completed to date and the additional testing planned for the future.
-
Technical area status report for waste destruction and stabilization
International Nuclear Information System (INIS)
Dalton, J.D.; Harris, T.L.; DeWitt, L.M.
1993-08-01
The Office of Environmental Restoration and Waste Management (EM) was established by the Department of Energy (DOE) to direct and coordinate waste management and site remediation programs/activities throughout the DOE complex. In order to successfully achieve the goal of properly managing waste and the cleanup of the DOE sites, the EM was divided into five organizations: the Office of Planning and Resource Management (EM-10); the Office of Environmental Quality Assurance and Resource Management (EM-20); the Office of Waste Operations (EM-30); the Office of Environmental Restoration (EM-40); and the Office of Technology and Development (EM-50). The mission of the Office of Technology Development (OTD) is to develop treatment technologies for DOE's operational and environmental restoration wastes where current treatment technologies are inadequate or not available. The Mixed Waste Integrated Program (MWIP) was created by OTD to assist in the development of treatment technologies for the DOE mixed low-level wastes (MLLW). The MWIP has established five Technical Support Groups (TSGs) whose purpose is to identify, evaluate, and develop treatment technologies within five general technical areas representing waste treatment functions from initial waste handling through generation of final waste forms. These TSGs are: (1) Front-End Waste Handling, (2) Physical/Chemical Treatment, (3) Waste Destruction and Stabilization, (4) Second-Stage Destruction and Offgas Treatment, and (5) Final Waste Forms. This report describes the functions of the Waste Destruction and Stabilization (WDS) group. Specifically, the following items are discussed: DOE waste stream identification; summary of previous efforts; summary of WDS treatment technologies; currently funded WDS activities; and recommendations for future activities
-
ISV technology development plan for buried waste
International Nuclear Information System (INIS)
Nickelson, D.F.; Callow, R.A.; Luey, J.K.
1992-07-01
This report identifies the main technical issues facing the in situ vitrification (ISV) application to buried waste, and presents a plan showing the top-level schedule and projected resources needed to develop and demonstrate the technology for meeting Environmental Restoration Department (ERD) needs. The plan also proposes a model strategy for the technology transfer from the Department of Energy's Office of Technology Development (DOE-OTD) to the Office of Environmental Restoration (DOE-ER) as the technology proceeds from issues resolution (development) to demonstration and remedial readiness. Implementation of the plan would require $34,91 1K in total funding to be spread in the years FY-93 through FY-98. Of this amount, $10,183K is planned to be funded by DOE-OTD through the ISV Integrated Program. The remaining amount, $24,728K, is recommended to be split between the Department of Energy (DOE) Office of Technology Development ($6,670K) and DOE Office of Environmental Restoration ($18,058K)
-
The development of information technologies
Directory of Open Access Journals (Sweden)
Kostúr Karol
2002-12-01
Full Text Available The contribution analyses the tasks information technologies in industry. At present time is the problem of connecting mutual variously levels of management. Therefore, first priority is an integration of information technologies. The information technologies for enterprise management are analysed. The product SAP R/3 appears as suitable for top management. The SAP R/3 Enterprise has a new technology so call web-server. This server enables the integration with e-business. The development my SAP is based on application of Business information warehouse (BW and Strategic enterprise management (SEM. The cheaper products (SPIN + EVIS are characterized too. Whitness Miner is very interesting system. The contribution this technology is programming realization of method KDD knowledge discovery in databases.
-
The Clean Development Mechanism and neglected environmental technologies
International Nuclear Information System (INIS)
Kim, Jung Eun; Popp, David; Prag, Andrew
2013-01-01
The Clean Development Mechanism (CDM) provides an institutional framework for developed countries to support projects that reduce greenhouse gas emissions in developing countries. Are the technologies promoted those most needed by the recipient countries? We address this question by first reviewing Technology Needs Assessments prepared by developing countries, and then comparing the stated needs to the technologies most frequently promoted via CDM. While there appears to be a good match between requested technologies and those used in CDM, desired technologies such as solar energy for remote locations, biofuels, improved cooking stoves, and efficient lighting appear “neglected” by CDM. Nonetheless, a review of costs for these technologies suggests that many could be cost effective for developing countries. For projects requiring wide dispersal of household items, such as cooking stoves or lighting, the administrative burdens of CDM provide a hurdle. In other cases, difficulties quantifying the ancillary benefits of these projects hinder the promotion of these technologies. We conclude with possible explanations for why these technologies are neglected and suggestions for future research. - Highlights: ► We identify technologies desired by developing countries but not provided via CDM. ► Solar PV is neglected due to high costs. ► The CDM process provides a hurdle for improved cooking stoves and efficient lighting. ► Implications for CDM and climate policy are discussed
-
Incorporating regulatory considerations into waste treatment technology development
International Nuclear Information System (INIS)
Siegel, M.R.; Powell, J.A.; Williams, T.A.; Kuusinen, T.L.; Lesperance, A.M.
1991-02-01
It is generally recognized that the development of new and innovative waste treatment technologies can significantly benefit the US Department of Energy's (DOE) environmental restoration and waste management program. DOE has established a research, development, demonstration, testing, and evaluation (RDDT ampersand E) program, managed by its Office of Technology Development, to encourage and direct the development of new waste treatment and management technologies. The treatment, storage, and disposal of hazardous and radioactive waste is heavily regulated both at the federal and state levels. In order to achieve the goals of applying the best new technologies in the fastest and most cost-effective manner possible, it is essential that regulatory factors be considered early and often during the development process. This paper presents a number of regulatory issues that are relevant to any program intended to encourage the development of new waste treatment and management technologies. It will also address how the use of these basic regulatory considerations can help ensure that technologies that are developed are acceptable to regulators and can therefore be deployed in the field. 2 refs
-
Directory of Open Access Journals (Sweden)
A.M. Paci
2003-10-01
Full Text Available Lo scopo del contributo è di fornire un aggiornamento sulla presenza del Toporagno del Vallese <em>Sorex antinoriiem>, del Toporagno acquatico di Miller <em>Neomys anomalusem> e della Talpa cieca <em>Talpa caecaem> in Umbria, dove le specie risultano accertate ormai da qualche anno. A tal fine sono stati rivisitati i reperti collezionati e la bibliografia conosciuta. Toporagno del Vallese: elevato di recente a livello di specie da Brünner et al. (2002, altrimenti considerato sottospecie del Toporagno comune (<em>S. araneus antinoriiem>. È conservato uno di tre crani incompleti (mancano mandibole ed incisivi superiori al momento prudenzialmente riferiti a <em>Sorex> cfr. <em>antinorii>, provenienti dall?Appennino umbro-marchigiano settentrionale (dintorni di Scalocchio - PG, 590 m. s.l.m. e determinati sulla base della pigmentazione rossa degli ipoconi del M1 e M2; Toporagno acquatico di Miller: tre crani (Breda in Paci e Romano op. cit. e un esemplare intero (Paci, ined. sono stati trovati a pochi chilometri di distanza gli uni dall?altro tra i comuni di Assisi e Valfabbrica, in ambienti mediocollinari limitrofi al Parco Regionale del M.te Subasio (Perugia. In provincia di Terni la specie viene segnalata da Isotti (op. cit. per i dintorni di Orvieto. Talpa cieca: sono noti una femmina e un maschio raccolti nel comune di Pietralunga (PG, rispettivamente in una conifereta a <em>Pinus nigraem> (m. 630 s.l.m. e nelle vicinanze di un bosco misto collinare a prevalenza di <em>Quercus cerrisem> (m. 640 s.l.m.. Recentemente un terzo individuo è stato rinvenuto nel comune di Sigillo (PG, all?interno del Parco Regionale di M.te Cucco, sul margine di una faggeta a 1100 m s.l.m. In entrambi i casi l?areale della specie è risultato parapatrico con quello di <em>Talpa europaeaem>.
-
Salmonelose humana e animal em Araraquara, S. Paulo: prevalência de Shigella em casos humanos
Directory of Open Access Journals (Sweden)
Deise Pasetto Falcão
1975-10-01
Full Text Available Admitida uma baixa freqüência de Salmonella com base em verificações anteriores em casos de diarréia aguda na cidade de Araraquara, S. Paulo, realizou-se uma investigação com um esquema ampliado para o isolamento de Salmonella a partir de 47 casos de gastroenterite infantil, 51 amostras de fezes de animais e 50 amostras de carnes e vísceras de animais destinados a alimentação. Foram isoladas Salmonella em 6,3% dos casos de gastroenterite, 5,8% de fezes de animais e 8,0% de amostras de alimentos, nesse último caso verificando-se a contaminação exclusivamente em fígado de porco, senão negativos todos os resultados de carne e vísceras de bovinos. Os sorotipos isolados corresponderam, em ordem decrescente de freqüência a S. anatum, S. derby e S. daytona. Nas gastroenterites infantis a freqüência de Shigella (12,7% foi duas vezes superior à de Salmonella (6,3%.After some observations, which indicated a low prevalence of Salmonella infections in the area of Araraquara, S. Paulo, an extended schedule of enrichment and isolation media were applied for investigating the presence of Salmonella organisms in 47 fecal specimens from infantile gastroenterites, 51 stool specimens from animais and 50 food samples of animal origin. Salmonella isolates were obtained in 6,3% of the g astro enter itis cases; 5,8% from animal stool cultures and 8,0% from food stuffs. In the last case only pork liver gave positive results, with no isolations being achieved from beef Products. S. anatum, S. derby and S. daytona were found in descendiny order of frequency. As related to the gastroenteritis cases Shigella organisms were twice as frequent than the Salmonella.
-
Technology as a factor of identity transformation: development of HOMO TECHNOLOGIES
Directory of Open Access Journals (Sweden)
Vadim A. Emelin
2016-03-01
Full Text Available Based on the understanding of identity as an individual’s identity with the self within the cultural historical chronotope, and experienced as the feeling of belonging/ non-belonging to some communities, controllability/uncontrollability of situations and predictability/non-predictability of events, the paper describes the processes of identity transformation in the course of a technological development. Taken as the initial point, the idea of organ-extension (K. Marx, E. Kapp and technological extension of man (S. Freud, M. McLuhan means that technologies are the extension of a human body and its organs. The processes of technological extension assume a particular scale under condition of information society development, within which computer-, telecommunication-, transport-, bio-, nano- and other high technologies have become an actual cultural historical force that has a power to transform a human. Special attention is paid to the fact that unlike the precedent technologies that have just facilitated some or other human performance, modern technologies of information society do not only change the human topology, widen and expand human natural abilities but also really transform higher mental functions and mediate mental processes and relations between human individuals. Man becomes not only a biological and social creature but also a technological one, i.e. so called HOMO TECHNOLOGICUS. The scale and speed of cultural historical changes make the study of the technological extensions role in the transformation of identity a key point for developing ways of comprehending their role in the life of a modern person, and also for forecasting the evolution of relationship between man and machines in the future.
-
Technology developments for improved tritium management
International Nuclear Information System (INIS)
Miller, J.M.; Spagnolo, D.A.
1994-06-01
Tritium technology developments have been an integral part of the advancement of CANDU reactor technology. An understanding of tritium behaviour within the heavy-water systems has led to improvements in tritium recovery processes, tritium measurement techniques and overall tritium control. Detritiation technology has been put in place as part of heavy water and tritium management practices. The advances made in these technologies are summarized. (author). 20 refs., 5 figs
-
SRS environmental technology development field test platform
International Nuclear Information System (INIS)
Riha, B.D.; Rossabi, J.; Eddy-Dilek, C.A.
1995-01-01
A critical and difficult step in the development and implementation of new technologies for environmental monitoring and characterization is successfully transferring these technologies to industry and government users for routine assessment and compliance activities. The Environmental Sciences Section of the DOE Savannah River Technology Center provides a forum for developers, potential users, and regulatory organizations to evaluate new technologies in comparison with baseline technologies in a well characterized field test bed. The principal objective of this project is to conduct comprehensive, objective field tests of monitoring and characterization technologies that are not currently used in EPA standard methods and evaluate their performance during actual operating conditions against baseline methods. This paper provides an overview of the field test site and a description of some of the technologies demonstrated at the site including their field applications
-
Suyono, Joko; Sukoco, Agus; Ikhsan Setiawan, M.; Suhermin; Rahim, Robbi
2017-12-01
Indonesia a great number of populations and demand of air transportation services keep increasing by the year in line with the increasing of population and welfare its people. Need for telematics solutions to support goods transport and distribution in cities is mainly due to the complexity of the processes taking place in urban transport systems and the importance of the optimisation of transport operations via ensuring adequate availability of linear and point infrastructure, while reducing the adverse impacts of the transport system on the environment. Efficient infrastructure supports economic growth, improves quality of life, and it is important for national security. Impact of GDP Information Technology in developing of Regional Central Business especially SME Business, are very large correlations and very significant supported by Passenger Arrival and Departure, Baggage Loaded and Unloaded, Cargo Loaded and Unloaded, Separated regional asset, Grant, Capital Expenditure, Investment of Regional Gov., GDP Agriculture-Forestry-Fishing, GDP Manufacturing, GDP Electricity-Gas, GDP Water supply- Sewerage-Waste Management-Remediation Activities, GDP Financial-Insurance Activities, GDP Business Activities, GDP Public Administration and Defense-Compulsory Social Security, GDP Education and GDP Other Services Activities
-
Task 8 - Management and reporting. Semi-annual report, April 1 - September 30, 1997
International Nuclear Information System (INIS)
Daly, D.J.; Erickson, T.A.
1997-01-01
The task of addressing the environmental needs of nuclear defense complex sites under the US Department of Energy (DOE) Environmental Management (EM) Program requires the timely availability of appropriate cleanup technologies. Fostering the commercialization of these technologies is the mission of EM-50, the EM Program Office of Science and Technology. DOE's Federal Energy Technology Center (FETC) pursues activities integral to the EM-50 mission through its Cooperative Agreement with the EM Office of Science and Technology (EMCA). The primary objective of Task 8 is to ensure the effectiveness of the EMCA. This is accomplished through (1) the coordination of internal EMCA activities and coordination with the FETC contractor's representative, (2) the coordination and expansion of the EMCA, and (3) effective technical transfer
-
Applying RFID technology in nuclear materials management
International Nuclear Information System (INIS)
Tsai, H.; Chen, K.; Liu, Y.; Norair, J.P.; Bellamy, S.; Shuler, J.
2008-01-01
The Packaging Certification Program (PCP) of US Department of Energy (DOE) Environmental Management (EM), Office of Safety Management and Operations (EM-60), has developed a radio frequency identification (RFID) system for the management of nuclear materials. Argonne National Laboratory, a PCP supporting laboratory, and Savi Technology, a Lockheed Martin Company, are collaborating in the development of the RFID system, a process that involves hardware modification (form factor, seal sensor and batteries), software development and irradiation experiments. Savannah River National Laboratory and Argonne will soon field test the active RFID system on Model 9975 drums, which are used for storage and transportation of fissile and radioactive materials. Potential benefits of the RFID system are enhanced safety and security, reduced need for manned surveillance, real time access of status and history data, and overall cost effectiveness
-
"JEAB" at 50: Coevolution of Research and Technology
Lattal, Kennon A.
2008-01-01
Evidence of how behavioral research and technology have evolved together abounds in the history of the "Journal of the Experimental Analysis of Behavior" ("JEAB"). Technology from outside the discipline (exogenous) from such disciplines as electronics and computer science has been adapted for use in behavioral research. Technology from within the…
-
RadWorks Project. ISS REM - to - BIRD - to - HERA: The Evolution of a Technology
McLeod, Catherine D.
2015-01-01
The advancement of particle detectors based on technologies developed for use in high-energy physics applications has enabled the development of a completely new generation of compact low-power active dosimeters and area monitors for use in space radiation environments. One such device, the TimePix, is being developed at CERN, and is providing the technology basis for the most recent line of radiation detection devices being developed by the NASA AES RadWorks project. The most fundamental of these devices, an ISS-Radiation Environment Monitor (REM), is installed as a USB device on ISS where it is monitoring the radiation environment on a perpetual basis. The second generation of this TimePix technology, the BIRD (Battery-operated Independent Radiation Detector), was flown on the NASA EFT-1 flight in December 2014. Data collected by BIRD was the first data made available from the Trapped Belt region of the Earth's atmosphere in over 40 years. The 3rdgeneration of this technology, the HERA (Hybrid Electronic Radiation Assessor), is planned to be integrated into the Orion EM-1, and EM-2 vehicles where it will monitor the radiation environment. For the EM-2 flight, HERA will provide Caution and Warning notification for SPEs as well as real time dose measurements for crew members. The development of this line of radiation detectors provide much greater information and characterization of charged particles in the space radiation environment than has been collected in the past, and in the process provide greater information to inform crew members of radiation related risks, while being very power and mass efficient.
-
Directory of Open Access Journals (Sweden)
Giovani José Caetano da Silveira
2005-12-01
Full Text Available Despite the increasing number of mass customization (MC studies in the literature and practice, two research gaps still remain. First, there is a lack of empirical studies to test predicted theoretical relationships between MC strategic, technical, and performance aspects (Tu et al., 2001. Second, there is limited understanding about the role of technology, including information technology in MC systems (Åhlström and Westbrook, 1999. This paper investigates the effects of technology adoption on the MC ability of 315 manufacturers of metal products, machinery, and equipment with either narrow or broad strategic market scope. The results suggest that different technologies have different effects on the MC dimensions of product capability and productivity, and that this effect is determined by the market scope of the firmApesar do número crescente de estudos sobre a Customização em Massa (CM enfocando tanto aspectos teóricos quanto práticos desta estratégia, duas lacunas persistem nas pesquisas sobre o assunto. A primeira diz respeito à ausência de estudos empíricos que testem a relação, prevista na teoria, entre aspectos estratégicos, técnicos e de desempenho da CM (Tu et al., 2001. A segunda lacuna está relacionada à compreensão limitada acerca do papel da tecnologia, em particular da tecnologia de informação, nos sistemas de CM (Åhlström and Westbrook, 1999. Este artigo investiga os efeitos da adoção da tecnologia sobre a capacidade para CM de 315 produtores de bens de metal, máquinas e equipamentos que atuam em mercados amplos ou focalizados. Os resultam indicam que diferentes tecnologias possuem efeitos distintos sobre as dimensões de variedade e produtividade da CM, e que tais efeitos são determinados pelo escopo de mercado das empresas.
-
An open, interoperable, and scalable prehospital information technology network architecture.
Landman, Adam B; Rokos, Ivan C; Burns, Kevin; Van Gelder, Carin M; Fisher, Roger M; Dunford, James V; Cone, David C; Bogucki, Sandy
2011-01-01
Some of the most intractable challenges in prehospital medicine include response time optimization, inefficiencies at the emergency medical services (EMS)-emergency department (ED) interface, and the ability to correlate field interventions with patient outcomes. Information technology (IT) can address these and other concerns by ensuring that system and patient information is received when and where it is needed, is fully integrated with prior and subsequent patient information, and is securely archived. Some EMS agencies have begun adopting information technologies, such as wireless transmission of 12-lead electrocardiograms, but few agencies have developed a comprehensive plan for management of their prehospital information and integration with other electronic medical records. This perspective article highlights the challenges and limitations of integrating IT elements without a strategic plan, and proposes an open, interoperable, and scalable prehospital information technology (PHIT) architecture. The two core components of this PHIT architecture are 1) routers with broadband network connectivity to share data between ambulance devices and EMS system information services and 2) an electronic patient care report to organize and archive all electronic prehospital data. To successfully implement this comprehensive PHIT architecture, data and technology requirements must be based on best available evidence, and the system must adhere to health data standards as well as privacy and security regulations. Recent federal legislation prioritizing health information technology may position federal agencies to help design and fund PHIT architectures.
-
Development of isotope hydrology technology in China
International Nuclear Information System (INIS)
Li Zhangsu
1988-01-01
The development of isotope hydrology technology in China is described. The isotope technology provides an independent approach for solving hydrological problems. Isotope hydrology is applied in three ways: the use of change in environmental isotopic composition of water (especially used in water resources exploitation), the use of artificial radioactive tracers and the use of redioisotope instruments. Many important achievements have been obtained in application of isotopic hydrology technology. For the sake of promoting rapid development of isotope hydrology the topics on management, technology and others are commented
-
Directory of Open Access Journals (Sweden)
Agostinho Lopes de Souza
2011-12-01
Full Text Available O objetivo deste trabalho foi estimar o estoque e o crescimento em volume (V, biomassa (B, carbono (C e dióxido de carbono (CO2 em Floresta Estacional Semidecidual no Vale do Rio Doce, em Minas Gerais. Foram utilizados dados de inventários do estrato arbóreo (DAP > 5,0 cm, cujas parcelas permanentes foram medidas em 2002 e 2007, em estágios médio (Mata 1 e avançado (Mata 2 de regeneração da vegetação secundária. Com base no inventário de 2002, foram selecionadas espécies que apresentavam maiores percentuais em volume e no mínimo cinco indivíduos para determinar as densidades básicas da madeira e da casca. A média da densidade básica da madeira foi de 0,65 g.cm-3 e da casca, igual a 0,49 g.cm-3. Os estoques e os crescimentos em V, B, C e CO2 foram estimados nos dois estágios, Mata 1 e Mata 2. Pelo fato de as matas se encontrarem em estágios médio e avançado de regeneração, respectivamente, elas apresentavam estruturas, estoques e crescimentos distintos.
-
Superconductive MRI system, MRT-50A/SUPER
International Nuclear Information System (INIS)
Suzuki, Hirokazu; Goro, Takehiko
1992-01-01
The MRI (magnetic resonance imaging) market has been rapidly growing and more than 1,300 MRI systems are now operating in the Japanese domestic market. An upper-middle range MRI market, which is characterized by high-image quality, has newly appeared between the high-end and middle-range market niches since last year. To be competitive in this upper-middle range market, Toshiba has developed a superconductive MRI system, the MRT-50A/SUPER. The new system featured a high-performance actively shielded gradient coil called the TSGC (twin-shielded gradient coil), installed in a compact superconductive magnet. This paper introduces the MRT-50A/SUPER and describes recent developments in MRI technology. (author)
-
competitive technologies for sustainable development
International Nuclear Information System (INIS)
Chriqui, Vincent; Bergougnoux, Jean; Hossie, Gaelle; Beeker, Etienne; Buba, Johanne; Delanoe, Julien; Ducos, Geraldine; Hilt, Etienne; Rigard-Cerison, Aude; Teillant, Aude; Auverlot, Dominique; Martinez, Elise; Dambrine, Fabrice; Roure, Francoise
2012-08-01
By letter dated 27 April 2011, the Director General of the Centre for Strategic Analysis, Vincent Chriqui, confided to Jean Bergougnoux, honorary president of the SNCF, Honorary General Director of EDF, the task of animating a reflection Prospective Technological Studies of the sectors of energy, transport and construction. This synthesis report, prepared with the assistance of rapporteurs Centre for Strategic Analysis, attempts to summarize and put into perspective all the work which show these specific reports. Admittedly some very complex issues still need supplements. It may therefore be useful to extend this work in a number of areas. Beyond its role in the competitiveness of a country, technological innovation is essential to provide appropriate responses to the challenges of our commitment to sustainable development in terms of economic growth, preservation of the environmental and social progress. Mission for Prospective Technological conducted by the Centre for Strategic Analysis has sought to clarify this dual problem by proposing a long-term vision for the energy, transport and construction. For each technology studied, it has attempted to assess both the possible contribution to sustainable development and the competitive potential of our country on the international scene. His work, chaired by Jean Bergougnoux have reviewed the technological advances that may occur in the coming decades in the sectors concerned. They examined the conditions for integration of these advances in systems and subsystems existing (or create) and the conditions of a mature technical, economic but also social. Wherever possible, two time horizons were identified: a medium-term horizon, 2030, for which we have a fairly clear vision of future developments and long-term horizon, 2050, which allows to consider jumps Scientists are still uncertain. Finally, the mission is interested in four transverse technologies involved consistently in the three study areas, which are likely to
-
Energy Technology Data Exchange (ETDEWEB)
1986-08-01
As for the development of 50t/d pilot plant for the development of liquefaction plant of Victorian brown coal in Austraria, outline of the contents about the second stage construction following the first stage construction up to this time is reported from the following 4 viewpoints; 1: design of process apparatuses, 2: manufacture of apparatuses, 3: fieldwork of the construction and 4: operation of the first stage facilities. On the first item the outline of detail design made by Japanese and Australian companies is described. On the second item the acceptance of purchasing goods from Japan and Australia and the condition of inspection and quality assurance to specific principal parts are described. On the third item the supplementary construction of the first stage, contents of constructions of the second stage are described. On the fourth item, preparation for operation, target, the whole circumstances and the results of maintenance, especially review of operation technique, training of operators, and occurrence and repair of troubles are described. As other relevant works, envirommental assessment, waste disposal, enviromental monitoring for exhaust gases, drainage and working enviroments, safety measure, educational training and moreover activities for local district people and the state of labor market as the support for execution of the project are described.
-
Ducak, Kate; Keller, Heather
2016-03-01
Few questionnaires to test nutrition knowledge and attitudes of older adults living independently in the community have been developed and tested to assess self-management tools such as Nutri-eSCREEN and other education programs. This study is a first step in the development of a questionnaire designed to evaluate the nutrition knowledge and attitudes of independent older adults (NAK-50+). The steps involved in this study were: (i) drafting initial questions based on the content of the Nutri-eSCREEN education material, (ii) using cognitive interviewing to determine if these questions were understandable and relevant (n = 9 adults ≥50 years of age), and (iii) completing test-retest reliability in a convenient community sample (n = 60 adults ≥50 years of age). Intra-class coefficients (ICC) and kappa were used to determine reliability. A 33-item questionnaire resulted from this development and analysis. ICC for the total score was 0.68 indicating good agreement and thus initial reliability. NAK-50+ is a face valid and reliable questionnaire that assesses nutrition knowledge and attitudes in independent adults aged ≥50 years. Further work to determine construct validity and to refine the questionnaire is warranted. Availability of the questionnaire for this age group will support rigorous evaluation of education and self-management interventions for this segment of the population.
-
Development of MMIS design technology for integral reactor
Energy Technology Data Exchange (ETDEWEB)
Koo, In Soo; Park, H. Y.; Lee, C. K. and others
1999-03-01
The objective of this study is to establish the concept design of the SMART MMIS through the setup of a structure and design concept of MMIS, the development of design methodology, and essential technologies for MMIS considering computer based digital technologies and human factors. Main activities of this study divided into three categories such as the development of conceptual design and requirement of the SMART I and C, the development of conceptual design and requirement of the SMART MMI, and essential technology for the MMIS. The results of main activities that have been performed during the study are as follows; 1) The review of licensing requirements and operating experience of existing plants. 2) The establishment of a system design concept about development strategy, basic functions and requirements, and applicable technology through the adoption of digital technology and human factorsengineering. 3) The accomplishment of function, structure, and design requirement of each MMIS through the performance of conceptual design on system structure and actuation logic using function analysis. It is necessary to develop and apply new technologies for the MMIS design compatible with the design basis of SMART. Considered essential technologies for the MMIS in this study are 1) the development of a signal validation algorithm and sensor diagnosis technique 2) the development of a soft controller for operator's action 3) the establishment of a data communication structure for MMIS architecture 4) the development of an information optimization basis and automatic start-up algorithm 5) the development of sensor reduction requirements 6) the development of a qualification method of digital equipment for applied digital technology and commercial grade items. (author)
-
Development of MMIS design technology for integral reactor
International Nuclear Information System (INIS)
Koo, In Soo; Park, H. Y.; Lee, C. K. and others
1999-03-01
The objective of this study is to establish the concept design of the SMART MMIS through the setup of a structure and design concept of MMIS, the development of design methodology, and essential technologies for MMIS considering computer based digital technologies and human factors. Main activities of this study divided into three categories such as the development of conceptual design and requirement of the SMART I and C, the development of conceptual design and requirement of the SMART MMI, and essential technology for the MMIS. The results of main activities that have been performed during the study are as follows; 1) The review of licensing requirements and operating experience of existing plants. 2) The establishment of a system design concept about development strategy, basic functions and requirements, and applicable technology through the adoption of digital technology and human factors engineering. 3) The accomplishment of function, structure, and design requirement of each MMIS through the performance of conceptual design on system structure and actuation logic using function analysis. It is necessary to develop and apply new technologies for the MMIS design compatible with the design basis of SMART. Considered essential technologies for the MMIS in this study are 1) the development of a signal validation algorithm and sensor diagnosis technique 2) the development of a soft controller for operator's action 3) the establishment of a data communication structure for MMIS architecture 4) the development of an information optimization basis and automatic start-up algorithm 5) the development of sensor reduction requirements 6) the development of a qualification method of digital equipment for applied digital technology and commercial grade items. (author)
-
Alves, Maria Luiza Braz; Paiva, Waldelice Oliveira; Assis, Luís Alberto Guimarães
1982-01-01
Resumo Avaliou-se, em Manaus, AM, a intensidade do ataque de Alternaria porri em híbridos e cultivares de cebola (Allium cepa L.) A doença ocorreu naturalmente e efetuaram-se as observações ao final do ciclo vegetativo. Considerou-se o total de plantas avaliadas como 100% e as plantas, de acordo com a porcentagem de infecção, foram enquadradas nas seguintes classes: I ((0-10%); II (10-30%); III (30-50%); IV (50-70%) e V (> 70%). O híbrido (Px-76) foi o único a apresentar plantas na classe com...
-
Albuquerque Operations Office, Albuquerque, New Mexico: Technology summary
International Nuclear Information System (INIS)
1994-08-01
This document has been prepared by the Department of Energy's (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT ampersand E) activities funded through the Albuquerque Operations Office. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents that highlight technology development activities within each of the OTD program elements. These integrated program summaries include: Volatile Organic Compounds in Non-Arid Soils, Volatile Organic Compounds in Arid Soils, Mixed Waste Landfill Integrated Demonstration, Uranium in Soils Integrated Demonstration, Characterization, Monitoring, and Sensor Technology, In Situ Remediation, Buried Waste Integrated Demonstration, Underground Storage Tank, Efficient Separations and Processing, Mixed Waste Integrated Program, Rocky Flats Compliance Program, Pollution Prevention Program, Innovation Investment Area, and Robotics Technology
-
Environmental Restoration and Waste Management (EM) program: An introduction
International Nuclear Information System (INIS)
1991-06-01
This booklet introduces the reader to the mission and functions of a major unit within the US Department of Energy (DOE): the Office of Environmental Restoration and Waste Management (EM). The Secretary of Energy established EM in November 198, implementing the first step in fulfilling the central purpose of DOE's annually updated Environmental Restoration and Waste Management Five-Year Plan (FYP). The first FYP had been developed three months earlier. The contents of this booklet, and their arrangement, reflect (and will, it is hoped, serve as a kind of appetizer for) the annual update of the Five-Year Plan. The Five-Year Plan supports DOE's strategy for meeting its 30-year compliance and cleanup goal. This strategy involves: (1) focusing DOE's activities on eliminating or reducing known or recognized potential risks to workers, the public, and the environment; (2) containing or isolating, removing, or detoxifying onsite and offsite contamination; and (3) developing technology to achieve DOE's environmental goals. 101 refs
-
China's High-technology Standards Development
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
There are several major technology standards, including audio video coding (AVS), automotive electronics, third generation (3G) mobile phones, mobile television, wireless networks and digital terrestrial television broadcasting, that have been released or are currently under development in China. This article offers a detailed analysis of each standard and studies their impact on China's high-technology industry.
-
Directory of Open Access Journals (Sweden)
M Scazufca
2002-12-01
Full Text Available Na medida em que a população mundial está envelhecendo, a demência está se constituindo em importante problema de saúde pública, particularmente nos países em desenvolvimento. Investigações epidemiológicas nestes países são escassas e apresentam dificuldades metodológicas adicionais, principalmente no que se refere à adequação sociocultural dos instrumentos utilizados para a definição de casos. Tendo em vista estas preocupações, foi fundado o "Grupo de Pesquisa em Demência 10/66", que é constituído por uma rede internacional de pesquisadores, predominantemente de países em desenvolvimento. O nome do grupo tem como referência o paradoxo de que menos de 10% dos estudos populacionais sobre demência são dirigidos aos 2/3 ou mais de casos de pessoas com demência que vivem em países em desenvolvimento. O objetivo do artigo é atualizar informações da literatura sobre as diferenças de prevalência e incidência de demência encontradas em países desenvolvidos e em desenvolvimento.As the world population is ageing, dementia becomes an important public health problem, particularly in developing countries. Epidemiological research in these settings is scarce and present additional methodological difficulties, mainly regarding the socio-cultural adequacy of instruments used to identify cases of dementia. As a result of these concerns the 10/66 Dementia Research Group was founded to fill this gap. This is an international network of investigators, mostly from developing countries, and the group's name was based on the paradox that less than 10% of the population-based studies on dementia are directed to 2/3 or more cases of people with dementia living in developing countries. The aim of the paper is to update data in the literature regarding the differences in dementia prevalence and incidence seen in developed and developing countries.
-
Millin, Michael G; Johnson, David E; Schimelpfenig, Tod; Conover, Keith; Sholl, Matthew; Busko, Jonnathan; Alter, Rachael; Smith, Will; Symonds, Jennifer; Taillac, Peter; Hawkins, Seth C
2017-01-01
A disparity exists between the skills needed to manage patients in wilderness EMS environments and the scopes of practice that are traditionally approved by state EMS regulators. In response, the National Association of EMS Physicians Wilderness EMS Committee led a project to define the educational core content supporting scopes of practice of wilderness EMS providers and the conditions when wilderness EMS providers should be required to have medical oversight. Using a Delphi process, a group of experts in wilderness EMS, representing educators, medical directors, and regulators, developed model educational core content. This core content is a foundation for wilderness EMS provider scopes of practice and builds on both the National EMS Education Standards and the National EMS Scope of Practice Model. These experts also identified the conditions when oversight is needed for wilderness EMS providers. By consensus, this group of experts identified the educational core content for four unique levels of wilderness EMS providers: Wilderness Emergency Medical Responder (WEMR), Wilderness Emergency Medical Technician (WEMT), Wilderness Advanced Emergency Medical Technician (WAEMT), and Wilderness Paramedic (WParamedic). These levels include specialized skills and techniques pertinent to the operational environment. The skills and techniques increase in complexity with more advanced certification levels, and address the unique circumstances of providing care to patients in the wilderness environment. Furthermore, this group identified that providers having a defined duty to act should be functioning with medical oversight. This group of experts defined the educational core content supporting the specific scopes of practice that each certification level of wilderness EMS provider should have when providing patient care in the wilderness setting. Wilderness EMS providers are, indeed, providing health care and should thus function within defined scopes of practice and with
-
Directory of Open Access Journals (Sweden)
José Carlos de Toledo
2008-04-01
Full Text Available As empresas de base tecnológica (EBTs estão associadas à inovação tecnológica, principalmente de produto, o que torna o desenvolvimento de produto um processo crítico para tais empresas. O desempenho deste processo pode ser avaliado em função dos resultados, em termos de sucesso ou não sucesso, do produto desenvolvido. E o grau deste sucesso depende de fatores de gestão praticados durante o desenvolvimento do projeto. Este artigo tem por objetivo identificar e analisar os fatores críticos de sucesso no gerenciamento de projetos de desenvolvimento de novos produtos em EBTs de pequeno e médio portes. Foram analisados projetos desenvolvidos por empresas dos setores de equipamentos médico-hospitalares (EMH e de automação de controle de processos (EACP, localizadas no Estado de São Paulo. Como método foi realizada uma pesquisa de levantamento (survey, aplicando-se um questionário estruturado em visitas realizadas às empresas. Foram levantados dados em 62 empresas, sendo 30 do setor de EMH e 32 do setor EACP. As unidades de análise foram projetos já concluídos por tais empresas. Os resultados demonstram que o gerenciamento de projetos de novos produtos de EBTs deve contemplar ações que valorizem mais as atividades de pré-desenvolvimento, tais como a avaliação do potencial de mercado do novo produto, a compreensão efetiva das necessidades do mercado e a sinergia do novo produto/projeto com outros produtos/projetos da empresa. Os resultados também enfatizam a importância do aprimoramento de habilidades gerenciais e de relacionamento interpessoal dos gerentes (ou líderes dos projetos. Normalmente cabe a esses gerentes (ou líderes suprirem, durante o desenvolvimento, as deficiências gerenciais e organizacionais da empresa.Technology based companies (TBCs are associated with technological innovation, mainly of products, what makes product development a critical process for them. This process can be evaluated using the
-
Technologies in support of CANDU development
International Nuclear Information System (INIS)
Turner, C.; Tapping, B.
2005-01-01
Atomic Energy of Canada, Ltd. (AECL) has significant research and development (R and D) programs designed to meet the needs of both existing CANDU reactors and new and evolving CANDU plant designs. These R and D programs cover a wide range of technology, from chemistry and materials support through to inspection and life management tools. Emphasis is placed on effective technology development programs for fuel channels, feeders and steam generators to ensure their operation through design life, and beyond. This paper specifically addresses how the R and D has been applied in the production of longer-lived pressure tubes for the most recent CANDU 6 reactors, and how this technology forms the basis for the pressure tubes of the Advanced CANDU Reactor (ACR). Similarly, AECL has developed solutions for other critical components such as calandria tubes, feeder pipe and steam generators. The paper also discusses how the R and D knowledge has been integrated into aging management databases and health monitoring tools. Since 1997, AECL has been working with CANDU utilities on comprehensive and integrated CANDU Plant Life Management (PLiM) programs for successful and reliable plant operation through design life and beyond. AECL has developed and implemented an advanced chemistry monitoring and diagnostic system, called ChemAND which allows on-line access by the operators to current and past chemistry conditions enabling appropriate responses and facilitating planning of shutdown maintenance actions. An equivalent tool for monitoring, trending and diagnosing thermal and mechanical data has also been developed; this tool is called ThermAND. AECL is developing the Maintenance Information, Monitoring, and Control (MIMC) system, which provide information to the user for condition-based decision-making in maintenance. To enable more effective inspections, surveillance and data collection, AECL has developed unique one-off tooling to carry out unanticipated inspection and repair
-
AFCI Safeguards Enhancement Study: Technology Development Roadmap
Energy Technology Data Exchange (ETDEWEB)
Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.
2008-12-31
The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.
-
Development of NDT technology of the welds
International Nuclear Information System (INIS)
Li Jianwen; Xu Yansen; Wang Zengyong
2002-01-01
Non-destructive testing (NDT) and its up-to-date development are summarized, including the advantages and disadvantages and the development of NDT technology. The up-to-date development of X-ray imaging and industrial CT is emphasised on, and the fundamental theory of ultrasonic imaging and related signal processing technology is introduced
-
Development of NDT technology of the welds
Energy Technology Data Exchange (ETDEWEB)
Jianwen, Li; Yansen, Xu; Zengyong, Wang [China Academy of Engineering Physics, Mianyang (China). Inst. of Mechanical Engineering
2002-07-01
Non-destructive testing (NDT) and its up-to-date development are summarized, including the advantages and disadvantages and the development of NDT technology. The up-to-date development of X-ray imaging and industrial CT is emphasised on, and the fundamental theory of ultrasonic imaging and related signal processing technology is introduced.
-
Development of a real-time monitor for airborne alpha emissions. First quarter report, TTP AL 142003
Energy Technology Data Exchange (ETDEWEB)
Gritzo, R.E.; Fowler, M.M.
1994-02-01
This is the first quarterly report for Fiscal Year (FY) 1994 for TTP AL 142003, Development of a Real-Time Monitor for Airborne Alpha Emissions. Los Alamos National Laboratory (LANL) is developing a new technology for on-line, real-time monitoring of incinerator stacks for low levels of airborne alpha activity. While initially developed for incinerators, this new technology may well find other applications in continuous air monitoring, process monitoring, and monitoring during remediation activities. Referred to as the Large-Volume Flow Thru Detector System (LVFTDS), this technology responds directly to the need for fast responding, high sensitivity effluent monitoring systems. With DOE EM-50 funding, LANL has fabricated a bench-top proof of concept detector system and is conducting tests to evaluate its performance. A second- generation prototype is being designed, based on requirements driven by potential field test sites. An industrial partner is being solicited to license the technology. Field trials of a full-scale detector system are planned for FY 95. Accomplishments during the first quarter of FY 94 are chronicled in this report, including budgetary data. A schedule for the remainder of the fiscal year is also provided.
-
Development of liquid type TBM technology for ITER
International Nuclear Information System (INIS)
Lee, Dong Won; Kim, S. K.; Yoon, J. S.
2012-03-01
The final objectives of this project are as follows; Development of the key techniques for the liquid type TBM for ITER: Developing plan for leading and participating liquid TBM concepts; Estimating cost and schedule according to development schedule and managing technologies; Developing integrated design system and completing the engineering design for liquid TBM; Developing the key technologies for the liquid TBM; Construction of performance test systems for liquid TBM and verification of the performance. We are technically surveying the ITER system design data, the insufficient part of ITER design, and required R and D items and so on. In Korea, HCML TBM, liquid type breeder with lithium or lead lithium, has been studied during the past years to develop a tritium breeding technology for tritium self-sufficiency of nuclear fusion reactor and the TBM was proposed to be tested in ITER. In this study, we can obtain the key technology of nuclear fusion reactor especially on the TBM design, analysis and manufacturing technology through the present project and these technologies will help the construction of Korea fusion DEMO reactor and the development of commercial nuclear fusion reactor in Korea
-
Technological opportunities and paths of development
DEFF Research Database (Denmark)
Plichta, Kirsten
1993-01-01
the outcome of different firms development effort may also help shape a path at the industry level. This may be because the criteria by which the market selects between the different product may to some extent be anticipated by the developing firms or because the criteria by which the market select betwee...... technological knowledge, their production, development and other routines as well prior investments in products and production equipment play an important role with regard to the technological opportunities that firms' identify and select for development. 3) Because history matters and because firms are bounded...... in the industry. 6) It is argued that such paths of incremental improvement at the industry level may be an outcome of a) the dynamics that produce the technological opportunities; b) the institutions that govern decisions and expectations and c) the criteria by which the chooses between different firms...
-
New York State Education Dept., Albany.
This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…
-
Definition of Technology Readiness Levels for Transmutation Fuel Development
International Nuclear Information System (INIS)
Jon Carmack; Kemal O. Pasamehmetoglu
2008-01-01
To quantitatively assess the maturity of a given technology, the Technology Readiness Level (TRL) process is used. The TRL process has been developed and successfully used by the Department of Defense (DOD) for development and deployment of new technology and systems for defense applications. In addition, NASA has also successfully used the TRL process to develop and deploy new systems for space applications. Transmutation fuel development is a critical technology needed for closing the nuclear fuel cycle. Because the deployment of a new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the transmutation fuel development program is very useful as a management and tracking tool. This report provides definition of the technology readiness level assessment process as defined for use in assessing nuclear fuel technology development for the Transuranic Fuel Development Campaign
-
Development of radioisotope tracer technology
International Nuclear Information System (INIS)
Jin, Joon Ha; Lee, Myun Joo; Jung, Sung Hee; Park, Soon Chul; Lim, Dong Soon; Kim, Jae Ho; Lee, Jae Choon; Lee, Doo Sung; Cho, Yong Suk; Shin, Sung Kuan
2000-04-01
The purpose of this study is to develop the radioisotope tracer technology, which can be used in solving industrial and environmental problems and to build a strong tracer group to support the local industries. In relation to the tracer technology in 1999, experiments to estimate the efficiencies of a sludge digester of a waste water treatment plant and a submerged biological reactor of a dye industry were conducted. As a result, the tracer technology for optimization of facilities related to wastewater treatment has been developed and is believed to contribute to improve their operation efficiency. The quantification of the experimental result was attempted to improve the confidence of tracer technology by ECRIN program which basically uses the MCNP simulation principle. Using thin layer activation technique, wear of tappet shim was estimated. Thin layer surface of a tappet shim was irradiated by proton beam and the correlation between the measured activity loss and the amount of wear was established. The equipment was developed to adjust the energy of proton which collides with the surface of tappet. The tracer project team has participated into the tracer test for estimating the efficiency of RFCC system in SK cooperation. From the experiment the tracer team has obtained the primary elements to be considered for judging the efficiency of RFCC unit. By developing the tracer techniques to test huge industrial units like RFCC, the tracer team will be able to support the local industries that require technical services to solve any urgent trouble. (author)
-
Atoms in industry: Radiation technology supports development [Foreword
International Nuclear Information System (INIS)
Amano, Yukiya
2015-01-01
Cutting-edge industrial technologies underpin the success of strong economies, in developed and developing countries alike. Nuclear science and technology, in particular, can make a major contribution to economic growth and competitiveness, and have an important role to play in support of sustainable development. The IAEA helps to make nuclear science and technology available to enable countries to pursue wider development objectives in areas including human health, agriculture, natural resource management and environmental protection. This edition of the IAEA Bulletin highlights some of the ways in which the technology is being put to effective use in industry.
-
Constituents from <em>Vigna em>vexillata> and Their Anti-Inflammatory Activity
Directory of Open Access Journals (Sweden)
Guo-Feng Chen
2012-08-01
Full Text Available The seeds of <em>Vigna em>genus are important food resources and there have already been many reports regarding their bioactivities. In our preliminary bioassay, the chloroform layer of methanol extracts of<em> V. vexillata em>demonstrated significant anti-inflammatory bioactivity. Therefore, the present research is aimed to purify and identify the anti-inflammatory principles of <em>V. vexillataem>. One new sterol (1 and two new isoflavones (2,3 were reported from the natural sources for the first time and their chemical structures were determined by the spectroscopic and mass spectrometric analyses. In addition, 37 known compounds were identified by comparison of their physical and spectroscopic data with those reported in the literature. Among the isolates, daidzein (23, abscisic acid (25, and quercetin (40 displayed the most significant inhibition of superoxide anion generation and elastase release.
-
Technological Developments in Networking, Education and Automation
Elleithy, Khaled; Iskander, Magued; Kapila, Vikram; Karim, Mohammad A; Mahmood, Ausif
2010-01-01
"Technological Developments in Networking, Education and Automation" includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the following areas: Computer Networks: Access Technologies, Medium Access Control, Network architectures and Equipment, Optical Networks and Switching, Telecommunication Technology, and Ultra Wideband Communications. Engineering Education and Online Learning: including development of courses and systems for engineering, technical and liberal studies programs; online laboratories; intelligent
-
Dry Refabrication Technology Development of Spent Nuclear Fuel
International Nuclear Information System (INIS)
Lee, Jung Won; Park, G. I.; Park, C. J.
2010-04-01
Key technical data on advanced nuclear fuel cycle technology development for the spent fuel recycling have been produced in this study. In the frame work of DUPIC, dry process oxide products fabrication, hot cell experimental data for decladding, powdering and oxide product fabrication from low and high burnup spent fuel have been produced, basic technology for fabrication of spent fuel standard material has been developed, and remote modulated welding equipment has been designed and fabricated. In the area of advanced pre-treatment process development, a rotary-type oxidizer and spherical particle fabrication process were developed by using SIMFUEL and off-gas treatment technology and zircalloy tube treatment technology were studied. In the area of the property characteristics of dry process products, fabrication technology of simulated dry process products was established and property models were developed based on reproducible property measurement data
-
Energy Technology Data Exchange (ETDEWEB)
NONE
1998-03-01
Following the previous fiscal year, the technology development was conducted of a high efficiency waste power generation system using general waste as fuel. In the development of high temperature high efficiency combustion furnace, a combustion test on the external circulating fluidized bed incinerator was made to obtain data on formation/decomposition of dioxins. Moreover, a combustion test was conducted using mock refuse, petroleum-derived waste and waste plastics, to confirm stabilized combustion characteristics and low pollution. In the development of a corrosion resistant superheater, made were the stress load high temperature corrosion test, study of intergranular corrosion by elements of impurities, etc. In the development of the environmental load reduction technology, conducted was the conceptional design of pulse plasma exhaust gas disposal equipment corresponding to the actual one. In the verification test in a pilot plant, the pilot plant passed the pre-use inspection and was completed in February 1998. In the study of an optimal total system, discussed were the data on the pilot plant verification test, measuring points, how to arrange them, etc. 2 refs., 88 figs., 50 tabs.
-
Development of Nuclear Fuel Remote Fabrication Technology
International Nuclear Information System (INIS)
Lee, Jung Won; Yang, M. S.; Kim, S. S. and others
2005-04-01
The aim of this study is to develop the essential technology of dry refabrication using spent fuel materials in a laboratory scale on the basis of proliferation resistance policy. The emphasis is placed on the assessment and the development of the essential technology of dry refabrication using spent fuel materials. In this study, the remote fuel fabrication technology to make a dry refabricated fuel with an enhanced quality was established. And the instrumented fuel pellets and mini-elements were manufactured for the irradiation testing in HANARO. The design and development technology of the remote fabrication equipment and the remote operating and maintenance technology of the equipment in hot cell were also achieved. These achievements will be used in and applied to the future back-end fuel cycle and GEN-IV fuel cycle and be a milestone for Korea to be an advanced nuclear country in the world
-
Directory of Open Access Journals (Sweden)
Xishi Tai
2012-09-01
Full Text Available A new trinuclear Cd (II complex [Cd3(L6(2,2-bipyridine3] [L =<em> Nem>-phenylsulfonyl-L>-leucinato] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction analysis. The results show that the complex belongs to the orthorhombic, space group<em> Pem>212121 with<em> aem> = 16.877(3 Å, <em>b
-
Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP)
International Nuclear Information System (INIS)
1994-04-01
The Characterization, Monitoring, and Sensor Technology Integrated Program seeks to deliver needed technologies, timely and cost-effectively, to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The scope of characterizations monitoring, and sensor technology needs that are required by those organizations encompass: (1) initial location and characterization of wastes and waste environments - prior to treatment; (2) monitoring of waste retrieval, remediation and treatment processes; (3) characterization of the co-position of final waste treatment forms to evaluate the performance of waste treatments processes; and (4) site closure and compliance monitoring. Wherever possible, the CMST-IP fosters technology transfer and commercialization of technologies that it sponsors
-
Energy Technology Data Exchange (ETDEWEB)
Enyakin, Yu.P.; Kotler, V.R.; Babii, V.I.; Shtal' man, S.G.; Shcherbachenko, S.I. (Vsesoyuznyi Teplotekhnicheskii Institut (USSR))
1991-06-01
Evaluates research programs of the All-Union Institute for Heat Technology in the USSR from 1970 to 1991. Research and development programs, developed technologies or equipment types, their tests and use on a commercial scale are discussed. Power plants in the USSR which use the technologies are listed. The following technologies are comparatively evaluated: recirculation of flue gases to a combustion system (reduces emission of nitrogen oxides by about 2 times), two-stage coal combustion (reduces emission by 40-50%), three-stage combustion (reduces emission by 40-50%), use of special types of burners (reduces emission by 25-30%), adapting temperature of air supplied to the combustion zone (reduces emission by 20-30%). 10 refs.
-
Development of improved technology for decommissioning operations
International Nuclear Information System (INIS)
Allen, R.P.
1982-07-01
This paper describes the technology development activities conducted at Pacific Northwest Laboratory under US Department of Energy sponsorship to help ensure the availability of safe, cost-effective and environmentally sound decommissioning technology for radioactively contaminated facilities. These improved decommissioning technologies include techniques for the removal of contaminated concrete surfaces and coatings, adaptation of electropolishing and vibratory finishing decontamination techniques for field decommissioning applications, development of sensitive field instrumentation and methods for the monitoring of large surface areas, techniques for the field sectioning of contaminated components, improved contamination-stabilizing coatings and application methods, and development of a small solidification system for the field solidification of liquid waste. The results of cost/benefit studies for some of these technologies are also reported
-
Status of molten carbonate fuel cell technology development
Parsons, E. L., Jr.; Williams, M. C.; George, T. J.
The MCFC technology has been identified by the DOE as a promising product for commercialization. Development of the MCFC technology supports the National Energy Strategy. Review of the status of the MCFC technology indicates that the MCFC technology developers are making rapid and significant progress. Manufacturing facility development and extensive testing is occurring. Improvements in performance (power density), lower costs, improved packaging, and scale up to full height are planned. MCFC developers need to continue to be responsive to end-users in potential markets. It will be market demands for the correct product definition which will ultimately determine the character of MCFC power plants. There is a need for continued MCFC product improvement and multiple product development tests.
-
Directory of Open Access Journals (Sweden)
Song Yang
2012-08-01
Full Text Available A series of <em>N>-substituted 5-chloro-6-phenylpyridazin-3(2<em>H>-one derivatives were synthesized based on our previous work; all compounds were characterized by spectral data and tested for <em>in vitroem> insecticidal activity against <em>Plutella xylostellaem>. The results showed that the synthesized pyridazin-3(2<em>H>-one compounds possessed good insecticidal activities, especially the compounds 4b, 4d, and 4h which showed > 90% activity at 100 mg/L. The structure-activity relationships (SAR for these compounds were also discussed.
-
Debenham, Sierra; Fuller, Matthew; Stewart, Matthew; Price, Raymond R
2017-12-01
By 2030, road traffic accidents are projected to be the fifth leading cause of death worldwide, with 90% of these deaths occurring in low- and middle-income countries (LMICs). While high-quality, prehospital trauma care is crucial to reduce the number of trauma-related deaths, effective Emergency Medical Systems (EMS) are limited or absent in many LMICs. Although lay providers have long been recognized as the front lines of informal trauma care in countries without formal EMS, few efforts have been made to capitalize on these networks. We suggest that lay providers can become a strong foundation for nascent EMS through a four-fold approach: strengthening and expanding existing lay provider training programs; incentivizing lay providers; strengthening locally available first aid supply chains; and using technology to link lay provider networks. Debenham S , Fuller M , Stewart M , Price RR . Where there is no EMS: lay providers in Emergency Medical Services care - EMS as a public health priority. Prehosp Disaster Med. 2017;32(6):593-595.
-
Joining technology development summary, 189a OH024
International Nuclear Information System (INIS)
Edmonds, D.P.
1978-01-01
Joining technology is discussed for Breeder Reactor technology including welding development and mechanical properties of weldments for austenitic stainless steels, high-temperature structural design data for austenitic stainless steel weldments and advanced transition joints is discussed. Technology developed in this program is briefly reviewed
-
Transferable site remediation technologies developed by U.S. DOE Office of Science and Technology
International Nuclear Information System (INIS)
Anderson, T.D.
1996-01-01
To provide needed technologies for site remediation, the US Department of Energy's Office of Environmental Management, Office of Science and Technology (OST) is developing technologies to address environmental problems associated with hazardous and radioactive contaminants in soil and groundwater. The Technology Investment Decision model serves as a framework for technology management in OST. Seven technology maturation stages are used in the model. These stages run from basic research through implementation. The Innovative Technology Summary Reports (ITSRs) provide a technical synopsis of an individual technology that has been developed. An ITSR is prepared for each technology that is successfully demonstrated in the field. The information required to produce an ITSR is collected as the technology matures through the Technology Investment Decision Process. As of July 1996 there have been thirteen ITSRs completed. This paper describes those thirteen technologies
-
ADVANCED TECHNOLOGIES OF ELECTRONIC EDUCATIONAL SYSTEMS DEVELOPMENT
Directory of Open Access Journals (Sweden)
M. Shishkina
2011-11-01
Full Text Available Actual problems and contradictions of electronic educational systems development are described: availability of education, quality of educational services; individualization of education; exposures and advantages in using of computer technology; standardization of technologies and resources. Tendencies of their solution in the view of development of new advanced technologies of e-education are specified. The essence and advantages of using the cloud computing technologies as a new platform of distributed learning are specified. Advanced directions of cloud-based data usage in executive system of education are declared: access management, content management, asset management, communications management.
-
VLBI Technology Development at SHAO
Zhang, Xiuzhong; Shu, Fengchun; Xiang, Ying; Zhu, Renjie; Xu, Zhijun; Chen, Zhong; Zheng, Weimin; Luo, Jintao; Wu, Yajun
2010-01-01
VLBI technology development made significant progress at SHAO in the last few years. The development status of the Chinese DBBC, the software and FPGA-based correlators, and the new VLBI antenna, as well as VLBI applications are summarized in this paper.
-
Energy Technology Data Exchange (ETDEWEB)
Oh, Won Zin; Lee, K. W.; Won, H. J.; Jung, C. J.; Choi, W. K.; Kim, G. N.; Moon, J. K
2001-04-01
The followings were studied through the project entitled 'Dry Decontamination Technology Development for Highly Radioactive Contaminants'. 1.Contaminant Characteristics Analysis of Domestic Nuclear Fuel Cycle Projects(NFCP) and Applicability Study of the Unit Dry-Decontamination Techniques A. Classification of contaminated equipments and characteristics analysis of contaminants B. Applicability study of the unit dry-decontamination techniques 2.Performance Evaluation of Unit Dry Decontamination Technique A. PFC decontamination technique B. CO2 decontamination technique C. Plasma decontamination technique 3.Development of Residual Radiation Assessment Methodology for High Radioactive Facility Decontamination A. Development of radioactive nuclide diffusion model on highly radioactive facility structure B. Obtainment of the procedure for assessment of residual radiation dose 4.Establishment of the Design Concept of Dry Decontamination Process Equipment Applicable to Highly Radioactive Contaminants 5.TRIGA soil unit decontamination technology development A. Development of soil washing and flushing technologies B. Development of electrokinetic soil decontamination technology.
-
Technology management for environmentally sound and sustainable development
International Nuclear Information System (INIS)
Zaidi, S.M.J.
1992-01-01
With the evolutionary change in the production activities of human societies, the concept of development has also been changing. In the recent years the emphasis has been on the environmentally sound and sustainable development. The environmentally sound and sustainable development can be obtained through judicious use of technology. Technology as a resource transformer has emerged as the most important factor which can constitute to economic growth. But technology is not an independent and autonomous force, it is only an instrument which needs to be used carefully, properly and appropriately which necessitates technology management. (author)
-
Development of technologies for utilizing geothermal energy
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-09-01
In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.
-
Energy Technology Data Exchange (ETDEWEB)
Silvio Vedovatto
2003-12-31
On April 2002 a 200KW Phosphoric Acid Fuel Cell (PAFC) Power Plant. was installed at LACTEC Institute For Technology Development, Research and Development facilities. The power plant installed at LACTEC site is the second of its kind in the Southern Hemisphere. Its presence, not only contributed to the creation of a Fuel Cell Stationary Power market for Brazil and the rest of the region, but increased the knowledge about fuel cell technology, and marked the point of entry as a reference for the education of a new generation of applied scientists. On its first year the power plant has operated 8,558 hours achieving an availability factor of 97% and supplying 730.50MWh of premium energy. As a second regional experience with fuel cell technology, we expect this report about LACTEC PACFC power plant performance, applications and cost-benefit evaluation will provide relevant information for future regional investments on this technology.
-
Developing a Strategic Plan for NASA JSC's Technology Investments
Stecklein, Jonette M.
2012-01-01
Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which adds risks as well as provides a major driver for costs. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cislunar space, near earth asteroid visits, lunar exploration, Mars space, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA fs Johnson Space Center (JSC), as the nation's primary center for human exploration, is addressing this challenge through an innovative approach allocating Internal Research and Development funding to projects that have been prioritized using four focus criteria, with appropriate importance weighting. These four focus criteria are the Human Space Flight Technology Needs, JSC Core Technology Competencies, Commercialization Potential, and Partnership Potential. The inherent coupling in these focus criteria have been captured in a database and have provided an initial prioritization for allocation of technology development research funding. This paper will describe this process and this database
-
Driving forces and barriers for environmental technology development
International Nuclear Information System (INIS)
2005-01-01
Driving forces and barriers behind development and usage of environmental technology is discussed, and also whether there are certain characteristics related to environmental innovations compared to other innovations in general. The development of environmental technology is in principle dominated by the same drivers and barriers as any other technology, but the order and strength of the various factors may be different. This examination as well as other empirical studies shows that regulations play a greater part for environmental technology than 'pure market forces'. To many participants it is important to be one step ahead of the regulations, i.e. the expected regulations are equally important as the factual ones in driving the technology development. Players in the business community express that it is important that the authorities cooperate with them when introducing new regulations. This will increase acceptance for the regulations and facilitate the necessary adjustments. The most important barrier in the development and use of the technologies studied is probably the lack of demand
-
International Nuclear Information System (INIS)
David Kearney; Hank Price
1999-01-01
Technology roadmapping is a needs-driven technology planning process to help identify, select, and develop technology alternatives to satisfy a set of market needs. The DOE's Office of Power Technologies' Concentrating Solar Power (CSP) Program recently sponsored a technology roadmapping workshop for parabolic trough technology. The workshop was attended by an impressive cross section of industry and research experts. The goals of the workshop were to evaluate the market potential for trough power projects, develop a better understanding of the current state of the technology, and to develop a conceptual plan for advancing the state of parabolic trough technology. This report documents and extends the roadmap that was conceptually developed during the workshop
-
Assessing medical technologies in development; a new paradigm of medical technology assessment
Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, Gerhard
2000-01-01
Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. - Method: We introduce a method, based on
-
Assessing medical technologies in development - A new paradigm of medical technology assessment
Hummel, MJM; van Rossum, W; Verkerke, GJ; Rakhorst, G
2000-01-01
Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. Method: We introduce a method, based on
-
Technology development for meeting with automobiles negotiation
Energy Technology Data Exchange (ETDEWEB)
Chung, Yong Il [Korea Institute of Machinery and Materials, Seoul (Korea)
2000-06-01
The direction of technology development for meeting with automobiles negotiation is to establish a development and supply policy of automobile with the minimum mileage. Furthermore the development policy of diesel car should be promoted with the same level of gasoline engine emission and a new concept of developing clean diesel engine is needed to achieve this goal. Therefore a smoke-filtering device, developed in Korea, should be promoted for supplying and post-process technology development such as SCR and DeNox catalyzer should be promoted.
-
Idaho Operations Office: Technology summary, June 1994
International Nuclear Information System (INIS)
1994-06-01
This document has been prepared by the Department of Energy's (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT ampersand E) activities funded through the Idaho Operations Office. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. OTD programs are designed to make new, innovative, and more cost-effective technologies available for transfer to DOE environmental restoration and waste management end-users. Projects are demonstrated, tested, and evaluated to produce solutions to current problems. Transition of technologies into more advanced stages of development is based upon technological, regulatory, economic, and institutional criteria. New technologies are made available for use in eliminating radioactive, hazardous, and other wastes in compliance with regulatory mandates. The primary goal is to protect human health and prevent further contamination. OTD's technology development programs address three major problem areas: (1) groundwater and soils cleanup; (2) waste retrieval and processing; and (3) pollution prevention. These problems are not unique to DOE, but are associated with other Federal agency and industry sites as well. Thus, technical solutions developed within OTD programs will benefit DOE, and should have direct applications in outside markets
-
Idaho Operations Office: Technology summary, June 1994
Energy Technology Data Exchange (ETDEWEB)
1994-06-01
This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Idaho Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. OTD programs are designed to make new, innovative, and more cost-effective technologies available for transfer to DOE environmental restoration and waste management end-users. Projects are demonstrated, tested, and evaluated to produce solutions to current problems. Transition of technologies into more advanced stages of development is based upon technological, regulatory, economic, and institutional criteria. New technologies are made available for use in eliminating radioactive, hazardous, and other wastes in compliance with regulatory mandates. The primary goal is to protect human health and prevent further contamination. OTD`s technology development programs address three major problem areas: (1) groundwater and soils cleanup; (2) waste retrieval and processing; and (3) pollution prevention. These problems are not unique to DOE, but are associated with other Federal agency and industry sites as well. Thus, technical solutions developed within OTD programs will benefit DOE, and should have direct applications in outside markets.
-
Aligning Technology Education Teaching with Brain Development
Katsioloudis, Petros
2015-01-01
This exploratory study was designed to determine if there is a level of alignment between technology education curriculum and theories of intellectual development. The researcher compared Epstein's Brain Growth Theory and Piaget's Status of Intellectual Development with technology education curriculum from Australia, England, and the United…
-
Development of Flow Accelerated Corrosion Reduction Technology
Energy Technology Data Exchange (ETDEWEB)
Heo, Min Bum; Choi, Won Yeol; Lee, Jong Chan; Lim, Dong Seok; Kwon, Byung Il; Ku, Hee Kwon; Kim, Jong Uk [FNC Tech, Yongin (Korea, Republic of)
2015-10-15
Development of flow accelerated corrosion reduction technology is necessary for prevent this kind of accidents. This study deals with development of flow accelerated corrosion reduction technology through platinum injection and developed of flow accelerated corrosion reduction technology by imitating water chemical condition in PWR secondary system in practice. In addition, in order to get reliability of water chemical simulator in PWR secondary system, analyzed and compared with test result through CFD analysis. This study composed test device that can simulate water chemical environment in PWR secondary system, in order to develop flow accelerated corrosion reduction , and evaluated the ratio of corrosion in water chemical environment in PWR secondary system. In conclusion, corrosion ratio of low alloy steel material that includes more Cr and Mo was lower. And the results were confirmed to be the maximum corrosion rate in the case that replicate the 90 elbow. Additionally, inserted Pt nano particle for developing flow accelerated corrosion rate reduction technology, the test results, it was confirmed for about 80% of the flow accelerated corrosion rate reduction than before input.
-
Agnew, Donald L.; Jones, Peter A.
1989-01-01
A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.
-
Genetic technology and agricultural development.
Staub, W J; Blase, M G
1971-07-09
The genetic technologies being adopted in South Asia are significant factors in the agricultural development of the area. But, labeling them " miracle seeds," solely responsible for recent agricultural growth, is misleading. Certainly the introduction of new genetic technology has catalyzed South Asian agriculture and has instilled a new dynamism essential to economic development. Somewhat similar phenomena have, however, been observed in other parts of the world in other periods of history. The nature of these genetic technologies, how they are being applied, and their limits and potential have been explored above. Also, the effects of these varieties on the generation of employment, and the distribution of benefits accruing from them have been examined in preliminary fashion. Stemming from the preceding discussion, two areas of priority appear obvious. First, the close association of genetic technologies with irrigation suggests that irrigation should receive more attention than it has in the past. Large-scale public irrigation schemes are expensive and have tended to yield low rates of return. However, there appears to be room for marginal increases in, or improvements of, existing irrigation facilities. Second, even with a rapid spread of the practices associated with highyeild varieties, it may be too much to expect the farm sector to absorb the expected increases in the rural labor force. The generation of employment is a major problem in India as well as in most other developing countries. Hence, possibilities for expanding rural, nonfarm employment and controlling population growth should be sought vigorously.
-
Directory of Open Access Journals (Sweden)
Guy Hamelin
2011-09-01
Full Text Available Na sua obra, Pedro Abelardo (1079-1142 destaca duas noções metafísicas que fundamentam sua teoria lógica: o <em style="mso-bidi-font-style: normal;">statusem> e o <em style="mso-bidi-font-style: normal;">dictum propositionisem>, ao causar, respectivamente, a imposição (<em style="mso-bidi-font-style: normal;">impositioem> dos termos universais e o valor de verdade das proposições. Trata-se de expressões que se referem a naturezas ontológicas peculiares, na medida em que não são consideradas coisas (<em style="mso-bidi-font-style: normal;">resem>, mesmo que constituem causas. Todavia, também não são nada. Abelardo as chama de ‘quase coisas’ (<em style="mso-bidi-font-style: normal;">quasi resem>. No presente artigo, explicamos, primeiro, essas duas noções essenciais da lógica abelardiana, antes de tentar, em seguida, encontrar a fonte dessa metafísica particular. Em oposição a comentadores importantes da lógica de Abelardo, que estimam que haja uma forte influência platônica sobre essa concepção específica, defendemos antes, com apoio de textos significativos e de acordo com o nominalismo abelardiano, que a maior ascendência sobre a metafísica do nosso autor é a do estoicismo, sobretudo, antigo.In his work, Peter Abelard (1079-1142 highlights two metaphysical notions, which sustain his logical theory: the <em>status> and the <em>dictum propositionisem>, causing respectively both the imposition (<em>impositio> of universal terms and the thuth-value of propositions. Both expressions refer to peculiar ontological natures, in so far as they are not considered things (<em>res>, even if they constitute causes. Nevertheless, neither are they ‘nothing’. Abelard calls them ‘quasi-things’ (<em>quasi resem>. In the present article, we expound first these two essential notions of Abelardian logic before then trying to find the source of this particular metaphysics. Contrary to some important
-
Albuquerque Operations Office, Albuquerque, New Mexico: Technology summary
Energy Technology Data Exchange (ETDEWEB)
1994-08-01
This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Albuquerque Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents that highlight technology development activities within each of the OTD program elements. These integrated program summaries include: Volatile Organic Compounds in Non-Arid Soils, Volatile Organic Compounds in Arid Soils, Mixed Waste Landfill Integrated Demonstration, Uranium in Soils Integrated Demonstration, Characterization, Monitoring, and Sensor Technology, In Situ Remediation, Buried Waste Integrated Demonstration, Underground Storage Tank, Efficient Separations and Processing, Mixed Waste Integrated Program, Rocky Flats Compliance Program, Pollution Prevention Program, Innovation Investment Area, and Robotics Technology.
-
International Nuclear Information System (INIS)
Katrib, J; Nadi, M; Kourtiche, D; Schmitt, P; Roth, P; Magne, I; Souques, M
2013-01-01
Public concern for the compatibility of electromagnetic (EM) sources with active implantable medical devices (AIMD) has prompted the development of new systems that can perform accurate exposure studies. EM field interference with active cardiac implants (e.g. implantable cardioverter-defibrillators (ICDs)) can be critical. This paper describes a magnetic field (MF) exposure system and the method developed for testing the immunity of ICD to continuous-wave MFs. The MFs were created by Helmholtz coils, housed in a Faraday cage. The coils were able to produce highly uniform MFs up to 4000 µT at 50 Hz and 3900 µT at 60 Hz, within the test space. Four ICDs were tested. No dysfunctions were found in the generated MFs. These results confirm that the tested ICDs were immune to low frequency MFs. (paper)
-
Proceedings of the US DOE Photovoltaics Technology Development and Applications Program Review
Energy Technology Data Exchange (ETDEWEB)
None
1978-01-01
The proceedings include summaries of thirty-eight presentations under the following sections: overview and project status reports; standards performance criteria; cost/economics; concentrator and flat panel technology alternative for 50 cents/watt; balance of system technology; and experience gained from the design and operation of photovoltaic systems.
-
International Nuclear Information System (INIS)
Kim, Jang Lyul; Kim, B. H.; Lee, J. I.; Lim, K. S.; Song, M. Y.; Joo, G. S.; Kim, S. I.; Chang, I. S.
2012-04-01
· Development of optically stimulated luminescence (OSL) technique for multi-purpose radiation dosimetry - Development of a semi-automatic type OSL measurement system · Number of sample holders: 10 ea · Development of a built-in type reference radiation irradiation system using 50 kV-1 mA X-rays of the maximum dose rate of 230 mGy/s - Development of an automatic diameter control system and crystal growth system for making a new OSL material: LiMgF 3 : X, LiAlO 2 : C - Development of a procedure of retrospective accident dosimetry · Establishment of Practical Technology for Internal Dose Assessment - Development of the technology to the internal dose assessment for an injection of radionuclides and intercomparison on the evaluation results of the committed effective dose between the estimators of Korea · Construction of workplace monitoring technique by quantification of neutron fields - Preparation of the neutron spectra DB of various neutron fields and production of those dosimetric data: 29 kinds of neutron fields using a thermal neutron irradiator, a proton accelerator and a neutron generator - Neutron monitoring procedure at workplace using neutron fluence spectra
-
Advanced Test Accelerator (ATA) pulse power technology development
International Nuclear Information System (INIS)
Reginato, L.L.; Branum, D.; Cook, E.
1981-01-01
The Advanced Test Accelerator (ATA) is a pulsed linear induction accelerator with the following design parameters: 50 MeV, 10 kA, 70 ns, and 1 kHz in a ten-pulse burst. Acceleration is accomplished by means of 190 ferrite-loaded cells, each capable of maintaining a 250 kV voltage pulse for 70 ns across a 1-inch gap. The unique characteristic of this machine is its 1 kHz burst mode capability at very high currents. This paper dscribes the pulse power development program which used the Experimental Test Accelerator (ETA) technology as a starting base. Considerable changes have been made both electrically and mechanically in the pulse power components with special consideration being given to the design to achieve higher reliability. A prototype module which incorporates all the pulse power components has been built and tested for millions of shots. Prototype components and test results are described
-
Technology development of p-type microstrip detectors with radiation hard p-spray isolation
International Nuclear Information System (INIS)
Pellegrini, G.; Fleta, C.; Campabadal, F.; Diez, S.; Lozano, M.; Rafi, J.M.; Ullan, M.
2006-01-01
A technology for the fabrication of p-type microstrip silicon radiation detectors using p-spray implant isolation has been developed at CNM-IMB. The p-spray isolation has been optimized in order to withstand a gamma irradiation dose up to 50 Mrad (Si), which represents the ionization radiation dose expected in the middle region of the SCT-Atlas detector of the future Super-LHC during 10 years of operation. The best technological options for the p-spray implant were found by using a simulation software package and dedicated calibration runs. Using the optimized technology, detectors have been fabricated in the Clean Room facility of CNM-IMB, and characterized by reverse current and capacitance measurements before and after irradiation. The average full depletion voltage measured on the non-irradiated detectors was V FD =41±3 V, while the leakage current density for the microstrip devices at V FD +20 V was 400 nA/cm 2
-
Marine and Hydrokinetic Technology Development Risk Management Framework
Energy Technology Data Exchange (ETDEWEB)
Snowberg, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States)
2015-09-01
Over the past decade, the global marine and hydrokinetic (MHK) industry has suffered a number of serious technological and commercial setbacks. To help reduce the risks of industry failures and advance the development of new technologies, the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) developed an MHK Risk Management Framework. By addressing uncertainties, the MHK Risk Management Framework increases the likelihood of successful development of an MHK technology. It covers projects of any technical readiness level (TRL) or technical performance level (TPL) and all risk types (e.g. technological risk, regulatory risk, commercial risk) over the development cycle. This framework is intended for the development and deployment of a single MHK technology—not for multiple device deployments within a plant. This risk framework is intended to meet DOE’s risk management expectations for the MHK technology research and development efforts of the Water Power Program (see Appendix A). It also provides an overview of other relevant risk management tools and documentation.1 This framework emphasizes design and risk reviews as formal gates to ensure risks are managed throughout the technology development cycle. Section 1 presents the recommended technology development cycle, Sections 2 and 3 present tools to assess the TRL and TPL of the project, respectively. Section 4 presents a risk management process with design and risk reviews for actively managing risk within the project, and Section 5 presents a detailed description of a risk registry to collect the risk management information into one living document. Section 6 presents recommendations for collecting and using lessons learned throughout the development process.
-
Dry refabrication technology development of spent nuclear fuel
International Nuclear Information System (INIS)
Park, Geun Il; Lee, J. W.; Song, K. C.
2012-04-01
Key technologies highly applicable to the development of advanced nuclear fuel cycle for the spent fuel recycling were developed using spent fuel and simulated spent fuel (SIMFUEL). In the frame work of dry process oxide products fabrication and the property characteristics of dry process products, hot cell experimental data for decladding, powdering and oxide product fabrication from low and high burnup spent fuel have been produced, basic technology for fabrication of spent fuel standard material has been developed, and remotely modulated welding equipment has been designed and fabricated. Also, fabrication technology of simulated dry process products was established and property models were developed based on reproducible property measurement data. In the development of head-end technology for dry refabrication of spent nuclear fuel and key technologies for volume reduction of head-end process waste which are essential in back-end fuel cycle field including pyro-processing, advanced head-end unit process technology development includes the establishment of experimental conditions for synthesis of porous fuel particles using a granulating furnace and for preparation of UO2 pellets, and fabrication and performance demonstration of engineering scale equipment for off-gas treatment of semi-volatile nuclides, and development of phosphate ceramic technology for immobilization of used filters. Radioactivation characterization and treatment equipment design of metal wastes from pretreatment process was conducted, and preliminary experiments of chlorination/electrorefining techniques for the treatment of hull wastes were performed. Based on the verification of the key technologies for head-end process via the hot-cell tests using spent nuclear fuel, pre-conceptual design for the head-end equipments was performed
-
Dry refabrication technology development of spent nuclear fuel
Energy Technology Data Exchange (ETDEWEB)
Park, Geun Il; Lee, J. W.; Song, K. C.; and others
2012-04-15
Key technologies highly applicable to the development of advanced nuclear fuel cycle for the spent fuel recycling were developed using spent fuel and simulated spent fuel (SIMFUEL). In the frame work of dry process oxide products fabrication and the property characteristics of dry process products, hot cell experimental data for decladding, powdering and oxide product fabrication from low and high burnup spent fuel have been produced, basic technology for fabrication of spent fuel standard material has been developed, and remotely modulated welding equipment has been designed and fabricated. Also, fabrication technology of simulated dry process products was established and property models were developed based on reproducible property measurement data. In the development of head-end technology for dry refabrication of spent nuclear fuel and key technologies for volume reduction of head-end process waste which are essential in back-end fuel cycle field including pyro-processing, advanced head-end unit process technology development includes the establishment of experimental conditions for synthesis of porous fuel particles using a granulating furnace and for preparation of UO2 pellets, and fabrication and performance demonstration of engineering scale equipment for off-gas treatment of semi-volatile nuclides, and development of phosphate ceramic technology for immobilization of used filters. Radioactivation characterization and treatment equipment design of metal wastes from pretreatment process was conducted, and preliminary experiments of chlorination/electrorefining techniques for the treatment of hull wastes were performed. Based on the verification of the key technologies for head-end process via the hot-cell tests using spent nuclear fuel, pre-conceptual design for the head-end equipments was performed.
-
Academic Training: Academic Training Programme 50th Anniversary Lectures
Françoise Benz
2004-01-01
13, 14, 15 & 16 September From 16:30 hrs - Main Auditorium bldg. 500 50 years of research at CERN: from past to future Monday 13 September 50 years of research at CERN: from past to future (Accelerator) (1/4) K. Hubner / CERN-DSU A summary of the evolution of the CERN accelerator complex since the beginning will be given. The emphasis will be on the salient features and highlights and what has been learned at each stage in terms of accelerator physics and technology. Possible future options for CERN based on accelerators will be discussed. Tuesday 14 September 50 years of research at CERN: from past to future (Theory) (2/4) G. Veneziano / CERN-PH-TH Great developments in our understanding of fundamental physics, together with striking technological advances, have repeatedly changed the way CERN/TH has been operating during the past 50 years. I will outline the main 'revolutions' I have myself witnessed at CERN/TH since the mid sixties, and then dare to express expectations, hopes, and fears for how ...
-
Modular, Reconfigurable, High-Energy Technology Development
Carrington, Connie; Howell, Joe
2006-01-01
The Modular, Reconfigurable High-Energy (MRHE) Technology Demonstrator project was to have been a series of ground-based demonstrations to mature critical technologies needed for in-space assembly of a highpower high-voltage modular spacecraft in low Earth orbit, enabling the development of future modular solar-powered exploration cargo-transport vehicles and infrastructure. MRHE was a project in the High Energy Space Systems (HESS) Program, within NASA's Exploration Systems Research and Technology (ESR&T) Program. NASA participants included Marshall Space Flight Center (MSFC), the Jet Propulsion Laboratory (JPL), and Glenn Research Center (GRC). Contractor participants were the Boeing Phantom Works in Huntsville, AL, Lockheed Martin Advanced Technology Center in Palo Alto, CA, ENTECH, Inc. in Keller, TX, and the University of AL Huntsville (UAH). MRHE's technical objectives were to mature: (a) lightweight, efficient, high-voltage, radiation-resistant solar power generation (SPG) technologies; (b) innovative, lightweight, efficient thermal management systems; (c) efficient, 100kW-class, high-voltage power delivery systems from an SPG to an electric thruster system; (d) autonomous rendezvous and docking technology for in-space assembly of modular, reconfigurable spacecraft; (e) robotic assembly of modular space systems; and (f) modular, reconfigurable distributed avionics technologies. Maturation of these technologies was to be implemented through a series of increasingly-inclusive laboratory demonstrations that would have integrated and demonstrated two systems-of-systems: (a) the autonomous rendezvous and docking of modular spacecraft with deployable structures, robotic assembly, reconfiguration both during assembly and (b) the development and integration of an advanced thermal heat pipe and a high-voltage power delivery system with a representative lightweight high-voltage SPG array. In addition, an integrated simulation testbed would have been developed
-
Directory of Open Access Journals (Sweden)
Aline Alves Vargas Gonçalves
2006-12-01
Full Text Available OBJETIVO: O objetivo deste estudo é verificar o valor de previsão da angina de peito no diagnóstico da DAC em pacientes portadores de EA, a partir da quinta década de vida. MÉTODOS: A população estudada foi constituída por 186 pacientes consecutivos com EA e idade e" 50 anos, referidos para cirurgia de troca valvar aórtica entre junho de 1989 e setembro de 2004. Cinecoronariografia de rotina foi realizada em todos os pacientes. Cento e um eram homens (54,3% e 85, mulheres (45,7%, com idade de 66±8 anos. Angina estava presente em 124 pacientes (66,7%. O gradiente máximo transvalvar aórtico foi de 89,4±27,6 mmHg e a área valvar aórtica de 0,59±0,17 cm2. Calculamos a sensibilidade, a especificidade, o valor de previsão positivo e negativo e a razão de verossimilhança positiva da angina na predição da presença de DAC. RESULTADOS: DAC estava presente em 93 pacientes (50%. Dos 124 pacientes com angina, 68 (54,8% apresentavam DAC; enquanto dos 62 sem angina, 25 apresentavam DAC (40,3%. Portanto, a sensibilidade da angina para DAC foi de 73,1%, a especificidade de 39,7%, valor preditivo positivo de 54,8%, valor preditivo negativo de 59,6% e razão de verossimilhança positiva de 1,6. CONCLUSÃO: A angina de peito não é bom preditor da presença de DAC em pacientes com EA a partir da quinta década de vida.OBJECTIVE: The objective of this study is to evaluate the value of angina pectoris as a predictor of CAD (coronary artery disease in patients with AS (aortic stenosis during and beyond the 5th decade of life. METHODS: The study population consisted of 186 consecutive patients with AS and e" 50 years of age, referred for surgical aortic valve replacement (AVR between June 1989 and September 2004. Routine coronary angiography was performed for all patients. One hundred and one patients were males (54.3% and 85 were females (45.7%, and the mean age was 66±8 years. One hundred and twenty-four patients (66.7% had angina. The maximum
-
International Nuclear Information System (INIS)
Lee, Jae Han; Joo, Young Sang; Lee, Hueong Yeon and others
2005-03-01
The key research items during the fiscal years of Phase 3 of the mechanical design technology development for liquid metal reactor are described. The objective of this project is to develop the design technology for the mechanical system of 600MWe, pool type liquid metal reactor with sodium coolant, and the structural integrity evaluation technology for mechanical system of the reactor system, structures and equipments. In the design technology development for mechanical structures, the reactor internal structures, reactor head and piping system, reactor containment structures have been studied, and new structural concepts compatible with the new reactor have been proposed. The thermal protection devices of reactor vessel and the refueling system have been conceptually established and the feasibility study for 3-D seismic isolation of reactor building was performed. The structural damage detection technology for reactor internal structures has been studied and its application has been confirmed. In the structural integrity evaluation technology development, the sensitivities of material constants for inelastic analysis codes have been studied and the applicabilities of the developed codes are enhanced. The high temperature creep-fatigue structural behavior test has been conducted so that high temperature structural damage test and evaluation technology were ensured at first in domestic. The high temperature seismic buckling analysis method to evaluate the buckling of thin reactor shell structure under the transient thermal load was established. In addition, the core seismic response analysis code reflected the fluid effect of core was developed and its accuracy was confirmed with a scale-down model test
-
Cyberfeminism, technology, and international "development".
Gajjala, R; Mamidipudi, A
1999-07-01
This article reports on the implications and benefits of Internet technology among women from developing countries. Cyberfeminism is the practice of feminism in cyberspace. Feminists believe that women should take control and augment Internet technologies to empower themselves. Learning to use the computers, getting "connected," and surfing the Internet are encouraged among all women with the aim of advancing feminist causes and empowering women. The Internet has been observed to cause radical changes in the way business and social activities are conducted. A description of how two women have engaged in cyberfeminism and worked in development and technology programs is included. One contributor, Annapurna Mamipudi, is involved in a non-governmental organization working with traditional handloom weavers in India Another contributor is Radhika Gajjala, who works in academia and creates on-line "discussion lists" and Web sites from her North American geographical location. Her job is to create spaces that provide opportunities for dialogue and collaboration among women with Internet access all over the world.
-
Directory of Open Access Journals (Sweden)
Sergio Nolasco Hora das Neves
2007-06-01
Full Text Available OBJECTIVE: This study assesses the relationship between sleep disturbances (SD and attention-deficit and hyperactivity disorder (ADHD to characterize clinical features and associated problems. METHOD: The medical records of 50 children and adolescents ranging in age from 4 to 17 years with ADHD without the diagnosis of mental retardation or pervasive developmental disorders were reviewed. RESULTS: Significant relationships were found between SD and drug therapy (pOBJETIVO: Avaliar a associação entre transtorno do déficit de atenção e hiperatividade (TDAH e distúrbios do sono para caracterizar fatores clínicos e problemas associados. MÉTODO: Foram revistos prontuários de 50 crianças e adolescentes com idade entre 4 e 17 anos e consecutivo diagnóstico de TDAH sem diagnóstico de retardo mental ou transtornos invasivos do desenvolvimento. RESULTADOS: Foram encontradas associações significativas entre alterações do sono e farmacoterapia (p<0,01, comorbidade (p<0,01 e maior aderência ao tratamento prescrito para sintomas de TDAH (p<0,05. CONCLUSÃO: Os resultados deste estudo sugerem que alterações do sono são relevantes em crianças com TDAH e podem estar associadas a aumento dos sintomas.
-
Development of Manufacturing Technology to Accelerate Cost Reduction of Low Concentration and
Energy Technology Data Exchange (ETDEWEB)
Detrick, Adam [The Solaria Corporation, Fremont, CA (United States)
2017-09-27
The purpose of this project was to accelerate deployment of cost-effective US-based manufacturing of Solaria’s unique c-Si module technology. This effort successfully resulted in the development of US-based manufacturing technology to support two highly-differentiated, market leading product platforms. The project was initially predicated on developing Solaria’s low-concentration PV (LCPV) module technology which at the time of the award was uniquely positioned to exceed the SunShot price goal of $0.50/Wp for standard c-Si modules. The Solaria LCPV module is a 2.5x concentrator that leverages proven, high-reliability PV module materials and low silicon cell usage into a technology package that already had the lowest direct material cost and leading Levelized Cost of Electricity (LCOE). With over 25 MW commercially deployed globally, the Solaria module was well positioned to continue to lead in PV module cost reduction. Throughout the term of the contract, market conditions changed dramatically and so to did Solaria’s product offerings to support this. However, the manufacturing technology developed for the LCPV module was successfully leveraged and optimized to support two new and different product platforms. BIPV “PowerVision” and High-efficiency “PowerXT” modules. The primary barrier to enabling high-volume PV module manufacturing in the US is the high manual labor component in certain unique aspects of our manufacturing process. The funding was used to develop unique manufacturing automation which makes the manual labor components of these key processes more efficient and increase throughput. At the core of Solaria’s product offerings are its unique and proprietary techniques for dicing and re-arranging solar cells into modules with highly-differentiated characteristics that address key gaps in the c-Si market. It is these techniques that were successfully evolved and deployed into US-based manufacturing site with SunShot funding. Today, Solaria
-
Energy Technology Data Exchange (ETDEWEB)
Burns, T R; Baumgartner, T
1985-01-01
This report outlines a theoretical framework for describing and analyzing the introduction of new technologies and the development of socio-technical systems associated with such innovations. While the report is largely theoretical in nature, it refers to certain strategic aspects of the development of nuclear, hydro-power and alternative energy systems. The ease with which technological innovation and development occur, the directions they take, and the impacts they have on the social and physical environments depend not only on purely technical and economic factors. Barriers, regulators and facilitators are inherent in the socio-political, institutional and cultural structures within which any attempts at innovation and technological development take place. The final section of the report explores some of the implications of the theory for policy and strategy, including consideration of environmental policy.
-
Directory of Open Access Journals (Sweden)
Eduardo F. Nunes
2011-01-01
Full Text Available Visou-se, neste trabalho, realizar a predição de sinais de radiofrequência para a aplicação de Rede de Sensores Sem Fio (RSSF de monitoramento e controle em uma granja de frango de corte. A tecnologia de comunicação sem fio utilizada foi a Zigbee, com o padrão IEEE 802.15.4 compondo a camada física e de enlace. Desenvolveu-se, para automatizar a leitura de potências, um aplicativo em linguagem Delphi e, para a predição de sinais de RF (Radiofrequência, utilizou-se o modelo Shadowing adaptado. Todos os testes foram realizados em granja comercial, no Município de Tuiuti, estado de São Paulo, Brasil. Os resultados obtidos demonstraram boas condições de transmissão até 131 m, indicando que a tecnologia Zigbee é adequada, segundo a perspectiva de propagação de sinais, para a implementação de RSSF em granjas de frango de corte.This study aimed to conduct an evaluation for the implementation of Wireless Sensors Network (WSN of tracking and control in a poultry farm. The wireless technology used was Zigbee, with the IEEE 802.15.4 standard forming the physical layer and link layer. To automate the power measurement a DELPHI language software was developed and, for the prediction of RF signals, an adjusted model of the shadowing was used. All tests were performed in a commercial broiler farm, in the city of Tuiuti in the State of São Paulo, Brazil. The results of this study indicate that Zigbee technology is appropriate, from the perspective of signal propagation, to implement WSN in poultry housing.
-
Survey of subsurface geophysical exploration technologies adaptable to an airborne platform
International Nuclear Information System (INIS)
Taylor, K.A.
1992-12-01
This report has been prepared by the US Department of Energy (DOE) as part of a Research Development Demonstration Testing and Evaluation (RDDT ampersand E) project by EG ampersand G Energy Measurement's (EG ampersand G/EM) Remote Sensing Laboratory. It examines geophysical detection techniques which may be used in Environmental Restoration/Waste Management (ER/WM) surveys to locate buried waste, waste containers, potential waste migratory paths, and aquifer depths. Because of the Remote Sensing Laboratory's unique survey capabilities, only those technologies which have been adapted or are capable of being adapted to an airborne platform were studied. This survey describes several of the available subsurface survey technologies and discusses the basic capabilities of each: the target detectability, required geologic conditions, and associated survey methods. Because the airborne capabilities of these survey techniques have not been fully developed, the chapters deal mostly with the ground-based capabilities of each of the technologies, with reference made to the airborne capabilities where applicable. The information about each survey technique came from various contractors whose companies employ these specific technologies. EG ampersand G/EM cannot guarantee or verify the accuracy of the contractor information; however, the data given is an indication of the technologies that are available
-
CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES
Energy Technology Data Exchange (ETDEWEB)
Christopher E. Hull
2005-11-04
This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.
-
Crosscutting Technology Development at the Center for Advanced Separation Technologies
Energy Technology Data Exchange (ETDEWEB)
Christopher E. Hull
2006-09-30
This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.
-
CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES
Energy Technology Data Exchange (ETDEWEB)
Christopher E. Hull
2006-05-15
This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.
-
Development of solid oxide fuel cell technology
Energy Technology Data Exchange (ETDEWEB)
Kang, Dae Kab; Kim, Sun Jae; Jung, Choong Hwan; Kim, Kyung Hoh; Park, Ji Yun; Oh, Suk Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
1995-01-01
Solid Oxide Fuel Cell (SOFC) technologies that use zirconium oxide as the electrolyte material were studied in this present report. SOFC exhibits a very high power generation efficiency of over 50 %, and does not discharge pollution materials such as dusts, sulfur dioxide, and nitrogen oxide. Zirconia, Ni/YSZ (yttria stabilized zirconia), and La-Sr-Mn-Oxide materials were developed for the electrolyte material, for the anode, and for the cathode, respectively. After making thin zirconia plate using tape casting process, anode and cathode powders were screen printed on the zirconia plate for fabricating unit cells. A test system composed of a vertical tube furnace, digital multimeter, DC current supplier, and measuring circuit was constructed for testing the unit cell performance. This system was controlled by a home-made computer program. Founded on this unit cell technology and system, a multi-stack SOFC system was studied. This system was composed of 10 unit cells each of them had an electrode area of 40 x 40 mm. Based on this system design, large and thin zirconia plates of 70 x 70 mm in area was fabricated for the electrolyte. Different from in the unit cell system, interconnectors are needed in the multi-stack system for connecting unit cells electrically. For this interconnectors, Inconel 750 alloy was selected, sliced into wafers, machined, surface finished, and then Pt-plated. 55 figs, 8 tabs, 51 refs. (Author).
-
Development of solid oxide fuel cell technology
International Nuclear Information System (INIS)
Kang, Dae Kab; Kim, Sun Jae; Jung, Choong Hwan; Kim, Kyung Hoh; Park, Ji Yun; Oh, Suk Jin
1995-01-01
Solid Oxide Fuel Cell (SOFC) technologies that use zirconium oxide as the electrolyte material were studied in this present report. SOFC exhibits a very high power generation efficiency of over 50 %, and does not discharge pollution materials such as dusts, sulfur dioxide, and nitrogen oxide. Zirconia, Ni/YSZ (yttria stabilized zirconia), and La-Sr-Mn-Oxide materials were developed for the electrolyte material, for the anode, and for the cathode, respectively. After making thin zirconia plate using tape casting process, anode and cathode powders were screen printed on the zirconia plate for fabricating unit cells. A test system composed of a vertical tube furnace, digital multimeter, DC current supplier, and measuring circuit was constructed for testing the unit cell performance. This system was controlled by a home-made computer program. Founded on this unit cell technology and system, a multi-stack SOFC system was studied. This system was composed of 10 unit cells each of them had an electrode area of 40 x 40 mm. Based on this system design, large and thin zirconia plates of 70 x 70 mm in area was fabricated for the electrolyte. Different from in the unit cell system, interconnectors are needed in the multi-stack system for connecting unit cells electrically. For this interconnectors, Inconel 750 alloy was selected, sliced into wafers, machined, surface finished, and then Pt-plated. 55 figs, 8 tabs, 51 refs. (Author)
-
Pacheco, Diana M; Bergerson, Joule A; Alvarez-Majmutov, Anton; Chen, Jinwen; MacLean, Heather L
2016-12-20
A life cycle-based model, OSTUM (Oil Sands Technologies for Upgrading Model), which evaluates the energy intensity and greenhouse gas (GHG) emissions of current oil sands upgrading technologies, is developed. Upgrading converts oil sands bitumen into high quality synthetic crude oil (SCO), a refinery feedstock. OSTUM's novel attributes include the following: the breadth of technologies and upgrading operations options that can be analyzed, energy intensity and GHG emissions being estimated at the process unit level, it not being dependent on a proprietary process simulator, and use of publicly available data. OSTUM is applied to a hypothetical, but realistic, upgrading operation based on delayed coking, the most common upgrading technology, resulting in emissions of 328 kg CO 2 e/m 3 SCO. The primary contributor to upgrading emissions (45%) is the use of natural gas for hydrogen production through steam methane reforming, followed by the use of natural gas as fuel in the rest of the process units' heaters (39%). OSTUM's results are in agreement with those of a process simulation model developed by CanmetENERGY, other literature, and confidential data of a commercial upgrading operation. For the application of the model, emissions are found to be most sensitive to the amount of natural gas utilized as feedstock by the steam methane reformer. OSTUM is capable of evaluating the impact of different technologies, feedstock qualities, operating conditions, and fuel mixes on upgrading emissions, and its life cycle perspective allows easy incorporation of results into well-to-wheel analyses.
-
Directory of Open Access Journals (Sweden)
Maísa Pinto Bravin
2014-10-01
Full Text Available O objetivo deste trabalho foi avaliar o desempenho agronômico das culturas do milho e do capim-xaraés (Urochloa brizantha 'Xaraés' em consórcio, cultivadas em plantio direto e convencional, em sistema agrossilvipastoril, com a aplicação de diferentes doses de nitrogênio em cobertura. O experimento foi conduzido em área de cultivo de milho com a espécie florestal mulateiro (Calycophyllum spruceanum. Utilizou-se o delineamento experimental de blocos ao acaso, com arranjo em parcelas subdivididas, com dois sistemas de manejo do solo (plantio direto e convencional com grade pesada alocados nas parcelas e com cinco doses de adubação nitrogenada em cobertura (0, 50, 100, 150 e 200 kg ha-1 de N, nas subparcelas, o que totalizou dez tratamentos. A produtividade de grãos de milho respondeu linearmente à aplicação de N em área de plantio convencional. Em área de plantio direto, a dose de 165 kg ha-1 de N em cobertura foi necessária para a obtenção de produtividades satisfatórias. A adubação nitrogenada em cobertura na cultura do milho, até a dose de 200 kg ha-1 de N, não influencia o rendimento do capim-xaraés em consórcio nas entrelinhas, após a colheita do milho.
-
Let nuclear technology create new brilliancy for china's sustainable development
International Nuclear Information System (INIS)
Du Xiangwan
2008-01-01
This paper summarizes the development and application directions of nuclear technology, including five aspects: nuclear technology and energy nuclear technology and medicine, nuclear anclear analysis technology, nuclear radiation technology, astronautics and voyage's nuclear power, etc. The paper discusses the importance of them to sustainable development and generalizes the development trilogy of nuclear science and technology and its prospect. (authors)
-
"Design for Somebody" - Approach Enabling Mobile Technology Development.
Sirkka, Andrew; Merilampi, Sari; Koivisto, Antti; Tommiska, Janika; Saarinen, Tatu-Pekka
2017-01-01
This paper presents case examples of Design for Somebody (DfS) philosophy used both in developing novel technologies and modifying existing main stream technologies applicable for users with special needs. DfS embodies variety of mobile technology approaches to generate personalised means to enable and motivate physical, cognitive and social skills development.
-
Scientific projection paper for cluster B: technology development
International Nuclear Information System (INIS)
Sinclair, W.K.
1980-01-01
This section deals with new technology developments in fields primarily concerned with dose reduction and matters relating to radiation protection rather than toward technology developments that might enhance the beneficial uses of ionizing radiation, except for the consideration of diagnostic techniques which may result in alternatives to ionizing radiation. Three major areas have been identified in which progress can be made via technology development: diagnostic radiology, occupational exposure and exposure of the public to radioactivity
-
The development of an innovative, real-time monitor for airborne alpha emissions
International Nuclear Information System (INIS)
Gritzo, R.; Fowler, M.; Wouters, J.
1994-01-01
Los Alamos National Laboratory (LANL) is developing a technology for on-line, real-time monitoring of incinerator stacks for low levels of airborne alpha activity. Referred to as the Large-Volume Flow Thru Detector System (LVFTDS), this technology uses a unique design for sensitive, real-time measurements of alpha particle emissions. Scintillating plates are stacked close together so that alpha-particle emissions in the flowing gas stream strike a plate. The light pulses produced when the alpha particle strikes the plate are registered by photomultiplier tubes and processed to determine the concentration of alpha emitting radionuclides present in the air. This technology directly addresses the public's demand for fast responding, high sensitivity effluent monitoring systems. With Department of Energy (DOE) EM-50 funding LANL has fabricated a beach-top proof of concept detector system and is conducting tests to evaluate its performance. A second generation prototype is being designed, based on requirements driven by potential field test sites. An industrial partner is being solicited to license the technology. Field trials of a full-scale detector system are planned for fiscal year 1995. In this paper the LVFTDS technology is explained, including the measured performance of a prototype detector. The advantages, disadvantages, and other ramifications of applying this technology to incinerator effluent monitoring are also discussed. An overview of the development effort is also provided
-
Systems engineering identification and control of mixed waste technology development
International Nuclear Information System (INIS)
Beitel, G.A.
1997-01-01
The Department of Energy (DOE) established the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop technologies required to meet the Department's commitments for treatment of mixed low-level and transuranic wastes. Waste treatment includes all necessary steps from generation through disposal. Systems engineering was employed to reduce programmatic risk, that is, risk of failure to meet technical commitments within cost and schedule. Customer needs (technology deficiencies) are identified from Site Treatment Plans, Consent Orders, ten year plans, Site Technical Coordinating Groups, Stakeholders, and Site Visits. The Technical Baseline, a prioritized list of technology deficiencies, forms the basis for determining which technology development activities will be supported by the MWFA. Technology Development Requirements Documents are prepared for each technology selected for development. After technologies have been successfully developed and demonstrated, they are documented in a Technology Performance Report. The Technology Performance Reports are available to any of the customers or potential users of the technology, thus closing the loop between problem identification and product development. This systematic approach to technology development and its effectiveness after 3 years is discussed in this paper
-
Development of a Virtual Technology Coach to Support Technology Integration for K-12 Educators
Sugar, William; van Tryon, Patricia J. Slagter
2014-01-01
In an effort to develop a virtual technology coach for K-12 educators, this article analyzed survey results from sixty teachers with regards to specific resources that a technology coach could provide within a virtual environment. A virtual technology coach was proposed as a possible solution to provide continual professional development for…
-
DOE SNF technology development necessary for final disposal
International Nuclear Information System (INIS)
Hale, D.L.; Fillmore, D.L.; Windes, W.E.
1996-01-01
Existing technology is inadequate to allow safe disposal of the entire inventory of US Department of Energy (DOE) spent nuclear fuel (SNF). Needs for SNF technology development were identified for each individual fuel type in the diverse inventory of SNF generated by past, current, and future DOE materials production, as well as SNF returned from domestic and foreign research reactors. This inventory consists of 259 fuel types with different matrices, cladding materials, meat composition, actinide content, and burnup. Management options for disposal of SNF include direct repository disposal, possible including some physical or chemical preparation, or processing to produce a qualified waste form by using existing aqueous processes or new treatment processes. Technology development needed for direct disposal includes drying, mitigating radionuclide release, canning, stabilization, and characterization technologies. While existing aqueous processing technology is fairly mature, technology development may be needed to apply one of these processes to SNF different than for which the process was originally developed. New processes to treat SNF not suitable for disposal in its current form were identified. These processes have several advantages over existing aqueous processes
-
Environmental Restoration and Waste Management (EM) program: An introduction
International Nuclear Information System (INIS)
1990-12-01
This booklet introduces the reader to the mission and functions of a major new unit within the US Department of Energy (DOE): the Office of Environmental Restoration and Waste Management (EM). The Secretary of Energy established EM in November 1989, implementing a central purpose of DOE's first annual Environmental Restoration and Waste Management Five-Year Plan, which had appeared three months earlier. The contents of this booklet, and their arrangement, reflect the annual update of the Five-Year Plan. The Five-Year Plan supports DOE's strategy for meeting its 30-year compliance and cleanup goal. This strategy involves: focusing DOE's activities on eliminating or reducing known or recognized potential risks to worker and public health and the environment, containing or isolating, removing, or detoxifying onsite and offsite contamination, and developing technology to achieve DOE's environmental goals
-
International Nuclear Information System (INIS)
Hellman, H.L.
2004-01-01
Due to the high cost of research and development and the broad spectrum of knowledge and competences required to develop fuel cell products, many product-developing firms outsource fuel cell technology, either partly or completely. This article addresses the inter-firm process of fuel cell product development from an Industrial Design Engineering perspective. The fuel cell product development can currently be characterised by a high degree of economic and technical uncertainty. Regarding the technology uncertainty: product-developing firms are more often then not unfamiliar with fuel cell technology technology. Yet there is a high interface complexity between the technology supplied and the product in which it is to be incorporated. In this paper the information exchange in three current fuel cell product development projects is analysed to determine the information required by a product designer to develop a fuel cell product. Technology transfer literature suggests that transfer effectiveness is greatest when the type of technology (technology uncertainty) and the type of relationship between the technology supplier and the recipient are carefully matched. In this line of thinking this paper proposes that the information required by a designer, determined by the design strategy and product/system volume, should be met by an appropriate level of communication interactivity with a technology specialist. (author)
-
Development and validation of educational technology for venous ulcer care.
Benevides, Jéssica Lima; Coutinho, Janaina Fonseca Victor; Pascoal, Liliane Chagas; Joventino, Emanuella Silva; Martins, Mariana Cavalcante; Gubert, Fabiane do Amaral; Alves, Allana Mirella
2016-04-01
To develop and validate an educational technology venous ulcers care. Methodological study conducted in five steps: Situational diagnosis; literature review; development of texts, illustrations and layout; apparent and content validity by the Content Validity Index, assessment of Flesch Readability Index; and pilot testing. The developed technology was a type of booklet entitled Booklet for Venous Ulcers Care, consisting of seven topics: Diet and food intake, walking and light exercise, resting with elevated leg, bandage care, compression therapy, family support, and keeping healthy habits. The apparent validity revealed minimal agreement of 85.7% in the clarity and comprehensibility. The total content validity index was 0.97, the Flesch Readability Index was 75%, corresponding to the reading "fairly easy". The pilot test showed that 100% of people with venous ulcers evaluated the text and the illustrations as understandable, as appropriate. The educational technology proved to be valid for the appearance and content with potential for use in clinical practice. Construir e validar uma tecnologia educativa para cuidados com úlcera venosa. Estudo metodológico realizado em cinco fases: diagnóstico situacional; revisão da literatura; desenvolvimento de textos, ilustrações e diagramação; validade de aparência e de conteúdo pelo Índice de Validade de Conteúdo, avaliação do Índice de Legibilidade de Flesch; e teste piloto. A tecnologia desenvolvida foi do tipo cartilha intitulada Cartilha para cuidados com úlcera venosa, constituída de sete tópicos: Alimentação, Caminhadas e exercícios leves, Repouso com a perna elevada, Cuidados com o curativo, Terapia compressiva, Apoio familiar, e manter hábitos saudáveis. A validade aparente revelou concordância mínima de 85,7% na clareza e compreensibilidade. O Índice de Validade de Conteúdo total foi de 0,97, o Índice de legibilidade de Flesch foi de 75%, o que correspondeu à leitura "razoavelmente f
-
Information technology research and development critical trends and issues
1985-01-01
Information Technology Research and Development: Critical Trends and Issues is a report of the Office of Technology Assessment of the United States Government on the research and development in the area of information technology. The report discusses information technology research and development - its goals, nature, issues, and strategies; environment and its changes; the roles of the participants; and the health of its field. The book then goes on to four selected case studies in information technology: advanced computer architecture; fiber optic communications; software engineering; and ar
-
Data-Base Software For Tracking Technological Developments
Aliberti, James A.; Wright, Simon; Monteith, Steve K.
1996-01-01
Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.
-
Controle alternativo da podridão peduncular em manga
Directory of Open Access Journals (Sweden)
Severina Rodrigues de Oliveira Lins
2011-09-01
Full Text Available O objetivo dessa pesquisa foi verificar o efeito de produtos alternativos em mangas inoculadas com Lasiodiplodia theobromae e a influência desses sobre o crescimento micelial do fitopatógeno. Mangas foram tratadas com fosfato de potássio (FP (50, 100 e 150, ácido hidroxidobenzóico (AH (5, 10 e 15, cloreto de cálcio (CC (0,13, 0,26 e 0,39 (em milimolar, Luz ultravioleta (LUV (10; 20 e 30 min., extratos de alho (EA, melão-de-são-caetano (EM, casca de manga (ECM (25, 50 e 75% e água (testemunha. Inoculou-se 10m de suspensão de 10(6 conídios/mL de L. theobromae imediatamente (T1, 12 horas (T2 e 24 horas, após os tratamentos (T3. No T1, os melhores tratamentos foram FP (50 mmol e CC (0,13 mmol. No T2 foram CC (0,13 mmol, AH (5 mmol, EA (25% e FP (100 mmol. No T3 não houve diferença entre os tratamentos. In vitro, os produtos foram misturados ao meio de cultura. Após solidificação, depositaram-se no centro de cada placa, estruturas do fitopatógeno. Quarenta e oito horas após, mediu-se o diâmetro da colônia. Os melhores tratamentos foram FP (100 e 150 mmol, ECM (50 e 75% e EA (50%.
-
Integrated Micro Product and Technology Development
DEFF Research Database (Denmark)
Hansen, Hans Nørgaard
2003-01-01
The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....
-
The Clean Development Mechanism and Technology Transfer
DEFF Research Database (Denmark)
Aggarwal, Aradhna
2017-01-01
This study assesses the impact of the Clean Development Mechanism (CDM) on the transfer of clean technology in India. The reason this study is unique is because firstly, it adopts an outcome-oriented approach to define ‘technology transfer’, which means that technology transfer occurs if firms...
-
Energy Technology Data Exchange (ETDEWEB)
Bernard, E.A. [Sandia National Labs., Germantown, MD (United States)
1995-12-31
The Department of Energy (DOE), in response to the 1992 Federal Facility Compliance Act, has prepared Site Treatment Plans (STP) for the approximately 2,000 waste streams identified within its mixed waste inventory Concurrently, emerging mixed waste treatment technologies are in final development. This paper defines a three-phase process to identify and assess implementation opportunities for these emerging technologies within the STP. It highlights the first phase, functional matching of expected treatment capabilities with proposed treatment requirements. Matches are based on treatment type, regulated contaminant and waste matrix type, for both capabilities and requirements. Results identify specific waste streams and volumes that could be treated by each emerging technology. A study for Plasma Hearth Process, Delphi DETOX{sup sm}, Supercritical Water Oxidation and Vitrification shows that about 200,000 ml of DOE`s mixed waste inventory can potentially be treated by one or more of these emerging technologies. Actual implementations are small fractions of the treatable inventory. Differences between potential and actual implementations must be minimized to accrue optimum benefit from implementation of emerging or alternative treatment technologies. Functional matching is the first phase in identifying and quantifying benefits, addressing technology system and treatment issues, and providing, in part, the basis for STP implementation decisions. DOE, through EM`s Office of Technology Development, has funded this work.
-
Development of superconductor application technology
Energy Technology Data Exchange (ETDEWEB)
Hong, G W; Kim, C J; Lee, H G; Lee, H J; Kim, K B; Won, D Y; Jang, K I; Kwon, S C; Kim, W J; Ji, Y A; Yang, S W; Kim, W K; Park, S D; Lee, M H; Lee, D M; Park, H W; Yu, J K; Lee, I S; Kim, J J; Choi, H S; Chu, Y; Kim, Y S; Kim, D H
1997-09-01
Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm{sup 2} was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm{sup 2} was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs.
-
Development of superconductor application technology
International Nuclear Information System (INIS)
Hong, G. W.; Kim, C. J.; Lee, H. G.; Lee, H. J.; Kim, K. B.; Won, D. Y.; Jang, K. I.; Kwon, S. C.; Kim, W. J.; Ji, Y. A.; Yang, S. W.; Kim, W. K.; Park, S. D.; Lee, M. H.; Lee, D. M.; Park, H. W.; Yu, J. K.; Lee, I. S.; Kim, J. J.; Choi, H. S.; Chu, Y.; Kim, Y. S.; Kim, D. H.
1997-09-01
Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm 2 was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm 2 was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs
-
International Nuclear Information System (INIS)
2010-01-01
Superconductivity has a long history of about 100 years. Over the past 50 years, progress in superconducting materials has been mainly in metallic superconductors, such as Nb, Nb-Ti and Nb 3 Sn, resulting in the creation of various application fields based on the superconducting technologies. High-T c superconductors, the first of which was discovered in 1986, have been changing the future vision of superconducting technology through the development of new application fields such as power cables. On basis of these trends, future prospects of superconductor technology up to 2040 are discussed. In this article from the viewpoints of material development and the applications of superconducting wires and electronic devices. (author)
-
Commercialization Development of Crop Straw Gasification Technologies in China
Directory of Open Access Journals (Sweden)
Zhengfeng Zhang
2014-12-01
Full Text Available Crop straw gasification technologies are the most promising biomass gasification technologies and have great potential to be further developed in China. However, the commercialization development of gasification technology in China is slow. In this paper, the technical reliability and practicability of crop straw gasification technologies, the economic feasibility of gas supply stations, the economic feasibility of crop straw gasification equipment manufacture enterprises and the social acceptability of crop straw gasification technologies are analyzed. The results show that presently both the atmospheric oxidation gasification technology and the carbonization pyrolysis gasification technology in China are mature and practical, and can provide fuel gas for households. However, there are still a series of problems associated with these technologies that need to be solved for the commercialization development, such as the high tar and CO content of the fuel gas. The economic feasibility of the gas supply stations is different in China. Parts of gas supply stations are unprofitable due to high initial investment, the low fuel gas price and the small numbers of consumers. In addition, the commercialization development of crop straw gasification equipment manufacture enterprises is hindered for the low market demand for gasification equipment which is related to the fund support from the government. The acceptance of the crop straw gasification technologies from both the government and the farmers in China may be a driving force of further commercialization development of the gasification technologies. Then, the crop straw gasification technologies in China have reached at the stage of pre-commercialization. At this stage, the gasification technologies are basically mature and have met many requirements of commercialization, however, some incentives are needed to encourage their further development.
-
Casali,André Oliveira; Detmann,Edenio; Valadares Filho,Sebastião de Campos; Pereira,José Carlos; Cunha,Maura da; Detmann,Kelly da Silva Coutinho; Paulino,Mário Fonseca
2009-01-01
Objetivou-se avaliar os teores de fibra em detergente neutro indigestível (FDNi) obtidos por procedimento in situ e a perda de partículas fibrosas em meio aquoso de alguns alimentos para ruminantes, utilizando sacos de diferentes tecidos. Observou-se, concomitantemente, a estrutura física dos tecidos utilizados. Os alimentos avaliados foram: farelo de trigo (FT), casca de soja (CS), silagem de milho (SM) e feno de capim-braquiária (FB); e os tecidos: náilon (50 µm); F57 (Ankom®); e tecido não...
-
Development of zirconium alloy tube manufacturing technology
International Nuclear Information System (INIS)
Kim, In Kyu; Park, Chan Hyun; Lee, Seung Hwan; Chung, Sun Kyo
2009-01-01
In late 2004, Korea Nuclear Fuel Company (KNF) launched a government funded joint development program with Westinghouse Electric Co. (WEC) to establish zirconium alloy tube manufacturing technology in Korea. Through this program, KNF and WEC have developed a state of the art facility to manufacture high quality nuclear tubes. KNF performed equipment qualification tests for each manufacturing machine with the support of WEC, and independently carried out product qualification tests for each tube product to be commercially produced. Apart from those tests, characterization test program consisting of specification test and characterization test was developed by KNF and WEC to demonstrate to customers of KNF the quality equivalency of products manufactured by KNF and WEC plants respectively. As part of establishment of performance evaluation technology for zirconium alloy tube in Korea, KNF carried out analyses of materials produced for the characterization test program using the most advanced techniques. Thanks to the accomplishment of the development of zirconium alloy tube manufacturing technology, KNF is expected to acquire positive spin off benefits in terms of technology and economy in the near future
-
Tarasenko, A. B.; Popel', O. S.
2015-11-01
The state and key tendencies of the development of basic technologies for manufacture of photoelectric converters (PECs) in the world are considered, and their advantages and disadvantages are discussed. The first part of the review gives short information on the development of photovoltaics in the world and planes of the development of solar power plants in Russia. Total power of photoelectric plants operating in various countries in 2015 exceeded 150 GW and increased in the last ten years with a rate of approximately 50% per year. Russia made important state decisions on the support of the development of renewable power engineering and developed mechanisms, which were attractive for business, on the stimulation of building of the network of solar power plants with a total power to 1.5 GW in the country to 2020. At the same time, the rigid demands are made with respect to the localization of the production of components of these plants that opens new abilities for the development of the domestic production of photovoltaics manufacture. Data on the efficiency of PECs of various types that are attained in the leading laboratories of the world are given. Particular emphasis has been placed on the consideration of basic silicon technologies of PEC manufacture, which had the widest commercial application. The basic methods for production of polycrystalline silicon and making single-crystal and multicrystal silicon are described. Fundamentals of making techniques for plates, PECs, and photoelectric modules based on single-crystal and polycrystalline silicon are considered. The second part will be devoted to modifications of manufacturing techniques for photoelectric converters, enhancement methods for contact structures, and recommendations of authors with respect to the choice of prospective technologies for the expansion of PEC production in Russia. It will involve formulations and substantiations of the most promising lines of the development of photoelectric
-
Reduction of heavy metals in refinery waste sludge using em treatment
International Nuclear Information System (INIS)
Ahmad, J.; Ahmad, F.; Saleemi, A.R.; Ahmad, I.
2005-01-01
This paper presents the efforts of National Cleaner Production Center (NCPC) and Attock Refinery Limited (ARL) Rawalpindi, to address the problem of refinery solid waste. A trial project was designed to treat and convert 1.7 m ton to oil sludge into environmental friendly residue (compost) under anaerobic conditions. The residue can be treated as bio fertilizer for agricultural purpose. The trial on bio remediation (anaerobic) of oily sludge of ARL, Rawalpindi within its premises using EM technology was successfully completed with the collaboration of effective microorganism research organization (EMRO), NCPC and ARL between 29th October to 10th December, 2002. The effective microorganisms transformed the undiluted oily sludge from ARL into bioactive sludge; which may be called as bio sludge. For heavy metal breakdown the trial data shows that Ba has been reduced by 85% in the EM. Treated oily sludge as compared to original ARL sludge, and Pb, Fe, Zn and Ni have been reduced by about 50% in the treated bio sludge. The contents of As, Cr, Cu and Mn showed no change. The residue obtained can be used as a bio fertilizer. (author)
-
Technology-Enhanced Learning in Developing Nations: A review
Directory of Open Access Journals (Sweden)
Shalni Gulati
2008-02-01
Full Text Available Learning ‘using’ technologies has become a global phenomenon. The Internet is often seen as a value-neutral tool that potentially allows individuals to overcome the constraints of traditional elitist spaces and gain unhindered access to learning. It is widely suggested that online technologies can help address issues of educational equity and social exclusion, and open up democratic and accessible educational opportunities. The national governments and non-governmental agencies who fund educational endeavours in developing countries have advocated the use of new technologies to reduce the cost of reaching and educating large numbers of children and adults who are currently missing out on education. This paper presents an overview of the educational developments in open, distance, and technology-facilitated learning that aim to reach the educationally deprived populations of the world. It reveals the challenges encountered by children and adults in developing countries as they attempt to access available educational opportunities. The discussion questions whether, in face of these challenges, developing nations should continue to invest money, time, and effort into e-learning developments. Can technology-enhanced learning help address the poverty, literacy, social, and political problems in developing countries?
-
Modern Trends in the Development of Business Technologies in Entrepreneurship
Directory of Open Access Journals (Sweden)
Dudko Pavlo M.
2017-09-01
Full Text Available The aim of the article is to study modern trends in the development of business technologies and their integration into entrepreneurship. Business technologies are a combination of methods, techniques, innovations, technical and mental solutions that promote development of business, expand its capabilities and create new prospects for it. The main business technologies that are widely used in entrepreneurship and have gained worldwide recognition include franchising, leasing, outsourcing, cashback, clustering. Due to the rapid development of information technologies and the Internet, such business technologies as e-commerce, IT outsourcing, offshore programming, crowdsourcing and the CRM strategy have emerged. At the same time, business technologies develop independently and without using modern technical innovations, an example of which is co-marketing. Summarizing, it can be noted that business technologies are not only the existing methods of business development but also a constant and dynamic search for new solutions in entrepreneurship. The development and improvement of the existing business technologies, as well as the emergence of new ones, directly depends on the technological progress and development of mankind.