WorldWideScience

Sample records for technology development aimed

  1. Development Principles of the Pedagogical System Aimed at Bachelor Training Based on Modern Information Technology

    Science.gov (United States)

    Kurymbayev, Sayat G.; Samashova, Gulfarida E.; Alshynbayeva, Zhuldyz E.; Mukhametzhanova, Aigul O.; Sharazdin, Adilzada M.; Kalybekova, Kalamkas S.; Kosybaeva, Umitzhan A.

    2016-01-01

    Modern education is aimed at training competent specialists, which requires modernizing the training process by implementing innovative technologies, especially information technologies. Information technologies allow quickly accessing necessary data, which speeds up the training process. This paper deals with issues related to training bachelors…

  2. Japan's Science and Technology Aim toward Globalization.

    Science.gov (United States)

    Lepkowski, Wil

    1989-01-01

    Investigates Japanese efforts to enter a new phase of its postwar technological period with a focus on internationalization of its economy and industry. Analyzes which technologies will dominate the early 21st century and their relationships to each other. (MVL)

  3. AIM cryocooler developments for HOT detectors

    Science.gov (United States)

    Rühlich, I.; Mai, M.; Withopf, A.; Rosenhagen, C.

    2014-06-01

    Significantly increased FPA temperatures for both Mid Wave and Long Wave IR detectors, i.e. HOT detectors, which have been developed in recent years are now leaving the development phase and are entering real application. HOT detectors allowing to push size weight and power (SWaP) of Integrated Detectors Cooler Assemblies (IDCA's) to a new level. Key component mainly driving achievable weight, volume and power consumption is the cryocooler. AIM cryocooler developments are focused on compact, lightweight linear cryocoolers driven by compact and high efficient digital cooler drive electronics (DCE) to also achieve highest MTTF targets. This technology is using moving magnet driving mechanisms and dual or single piston compressors. Whereas SX030 which was presented at SPIE in 2012 consuming less 3 WDC to operate a typical IDCA at 140K, next smaller cooler SX020 is designed to provide sufficient cooling power at detector temperature above 160K. The cooler weight of less than 200g and a total compressor length of 60mm makes it an ideal solution for all applications with limited weight and power budget, like in handheld applications. For operating a typical 640x512, 15μm MW IR detector the power consumption will be less than 1.5WDC. MTTF for the cooler will be in excess of 30,000h and thus achieving low maintenance cost also in 24/7 applications. The SX020 compressor is based on a single piston design with integrated passive balancer in a new design achieves very low exported vibration in the order of 100mN in the compressor axis. AIM is using a modular approach, allowing the chose between 5 different compressor types for one common Stirling expander. The 6mm expander with a total length of 74mm is now available in a new design that fits into standard dewar bores originally designed for rotary coolers. Also available is a 9mm coldfinger in both versions. In development is an ultra-short expander with around 35mm total length to achieve highest compactness. Technical

  4. Biomedical foundation supports technology aimed at destroying cancer cells

    OpenAIRE

    Nystrom, Lynn A.

    2008-01-01

    A new technology, using electric pulses to destroy cancer tissue and named by NASA Tech Briefs as one of seven key technological breakthroughs of 2007, is receiving additional support aimed at moving the procedure to the marketplace. One of its lead developers, Rafael V. Davalos, a faculty member of the Virginia Tech-Wake Forest University School of Biomedical Engineering and Sciences (SBES), received a $240,000 grant from the Wallace H. Coulter Foundation and $25,000 from the Wake Forest Com...

  5. Learning object for teacher training aimed to develop communication skills

    Directory of Open Access Journals (Sweden)

    Norma Esmeralda RODRÍGUEZ RAMÍREZ

    2014-06-01

    Full Text Available This article presents the results and reflections obtained across a research aimed to analyze the quality criteria of an opened learning object oriented to develop communication skills in order to be able to report and validate it according to its content, pedagogic structure, technological structure, graphical and textual language and usability to teacher training, in order to base it theoretically, pedagogically and technologically. The research question was: Which are the quality criteria that a learning object aimed to develop communication skills must cover? Under a quantitative approach, there were electronic questionnaires applied to: 34 Technological University teachers, eight experts about of communicative competence, teaching, technology and graphic design. The results indicated that some of the quality criteria of learning object are: the effective managing of the learning content, the balanced composition of his pedagogic structure, the technological structure efficiency and the proper managing of graphical and textual language.

  6. Development of Image Overlay and Knowledge Transfer Module Technologies Aimed at Enhancing Feasibility and External Validation of Magnetic Resonance Imaging-based Scoring Systems.

    Science.gov (United States)

    Jaremko, Jacob L; Pitts, Meaghan; Maksymowych, Walter P; Lambert, Robert G

    2016-01-01

    Semiquantitative arthritis scoring assesses disease burden by scoring presence/extent of features such as bone marrow lesion (BML) or effusion in multiple anatomic regions at a joint. An image overlay clarifying region borders may enhance feasibility and reliability of these scoring systems. To be scalable for use in large clinical trials, systematic computer-based user training is desirable. We developed an overlay and user training module for magnetic resonance imaging (MRI)-based scoring of hip osteoarthritis (OA). We designed a semitransparent 2-dimensional image overlay applied to individual MRI slices to facilitate hip OA scoring [HIMRISS (Hip Inflammation MRI Scoring System)], initially using freeware and then in a customized HTML Web browser environment. We developed a systematic knowledge translation package including instructional presentation, fully scored expert consensus cases, and video tutorials for training in the use of these scoring systems with the overlays. Three musculoskeletal radiologists who had not used this scoring system before each performed a scoring exercise with no overlay, then repeated this with overlays after completing the training module. Based on postexercise interviews and a reader survey, we identified and corrected problems in the module. The entire training process was then repeated using 3 new readers. Overlays were considered useful, particularly when integrated into a Web browser. The knowledge translation module was considered conceptually valuable, but as initially implemented was too lengthy and not sufficiently interactive. Semitransparent image overlays and standardized knowledge translation modules for reader training show promise to facilitate reader calibration using MRI-based scoring systems. Based on our experience, knowledge translation modules should emphasize close feedback evaluating performance and reader time efficiency.

  7. TECHNOLOGICAL PROCESS MODELING AIMING TO IMPROVE ITS OPERATIONS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Ivan Mihajlović

    2011-11-01

    Full Text Available This paper presents the modeling procedure of one real technological system. In this study, thecopper extraction from the copper flotation waste generated at the Bor Copper Mine (Serbia, werethe object of modeling. Sufficient data base for statistical modeling was constructed using theorthogonal factorial design of the experiments. Mathematical model of investigated system wasdeveloped using the combination of linear and multiple linear statistical analysis approach. Thepurpose of such a model is obtaining optimal states of the system that enable efficient operationsmanagement. Besides technological and economical, ecological parameters of the process wereconsidered as crucial input variables.

  8. Progress of MCT Detector Technology at AIM Towards Smaller Pitch and Lower Dark Current

    Science.gov (United States)

    Eich, D.; Schirmacher, W.; Hanna, S.; Mahlein, K. M.; Fries, P.; Figgemeier, H.

    2017-09-01

    We present our latest results on cooled p-on- n planar mercury cadmium telluride (MCT) photodiode technology. Along with a reduction in dark current for raising the operating temperature ( T op), AIM INFRAROT-MODULE GmbH (AIM) has devoted its development efforts to shrinking the pixel size. Both are essential requirements to meet the market demands for reduced size, weight and power and high-operating temperature applications. Detectors based on the p-on- n technology developed at AIM now span the spectrum from the mid-wavelength infrared (MWIR) to the very long wavelength infrared (VLWIR) with cut-off wavelengths from 5 μm to about 13.5 μm at 80 K. The development of the p-on- n technology for VLWIR as well as for MWIR is mainly implemented in a planar photodetector design with a 20- μm pixel pitch. For the VLWIR, dark currents significantly reduced as compared to `Tennant's Rule 07' are demonstrated for operating temperatures between 30 K and 100 K. This allows for the same dark current performance at a 20 K higher operating temperature than with previous AIM technology. For MWIR detectors with a 20- μm pitch, noise equivalent temperature differences of less than 30 mK are obtained up to 170 K. This technology has been transferred to our small pixel pitch high resolution (XGA) MWIR detector with 1024 × 768 pixels at a 10- μm pitch. Excellent performance at an operating temperature of 160 K is demonstrated.

  9. PEDAGOGICAL TECHNOLOGY AIMED AT STUDENTS’ ADAPTATION TO DISCIPLINE-BASED EDUCATION IN SECONDARY SCHOOLS

    Directory of Open Access Journals (Sweden)

    Ekaterina M. Cheprakova

    2015-01-01

    Full Text Available The aim of the study is to describe the educational technology aimed at students adaptation to discipline-based education in basic school; results discussion of the application practice to the educational process of the 5th grade.Methods. The methods involve learning experience, school documentation analysis, pedagogical experiment, study of students’ creativity and pedagogical experience on its organizational work. Systematic approach is used while structuring of the 5th grade students’ representations on the disciplines’ content of primary and basic general education on the methodological levelResults. The pedagogical technology of breaking the students’ educational disadaptation in the basic school is presented. The program of the course «All the subjects are good» is worked out. This program may allow students to adapt to the discipline content of the general education, to understand the essence of curriculum disciplines content and links between them, and the motivation development towards disciplinebased education evidence students’ adaptation. These objectives can be achieved through generation of skills based on the algorithmic of the concepts’ definitions mastering. The pilot implementation of the proposed technology in secondary school № 65 and in the Center «Giftedness and technology» of Yekaterinburg is presented.Scientific novelty. The effective way of neutralization and elimination of students’ discipline-educational disadaptation based on purposeful development of their conceptual thinking is proposed.Practical significance. The technology developed by authors allows teachers to form and develop the universal educational actions representing itself as a result of school training in the requirements of the educational standard. Timely use of this technology at transition age of children from primary school to secondary one provides the further success of their education.

  10. Technology adoption and prediction tools for everyday technologies aimed at people with dementia.

    Science.gov (United States)

    Chaurasia, Priyanka; McClean, Sally I; Nugent, Chris D; Cleland, Ian; Shuai Zhang; Donnelly, Mark P; Scotney, Bryan W; Sanders, Chelsea; Smith, Ken; Norton, Maria C; Tschanz, JoAnn

    2016-08-01

    A wide range of assistive technologies have been developed to support the elderly population with the goal of promoting independent living. The adoption of these technology based solutions is, however, critical to their overarching success. In our previous research we addressed the significance of modelling user adoption to reminding technologies based on a range of physical, environmental and social factors. In our current work we build upon our initial modeling through considering a wider range of computational approaches and identify a reduced set of relevant features that can aid the medical professionals to make an informed choice of whether to recommend the technology or not. The adoption models produced were evaluated on a multi-criterion basis: in terms of prediction performance, robustness and bias in relation to two types of errors. The effects of data imbalance on prediction performance was also considered. With handling the imbalance in the dataset, a 16 feature-subset was evaluated consisting of 173 instances, resulting in the ability to differentiate between adopters and non-adopters with an overall accuracy of 99.42 %.

  11. Locally specific measures for employment aimed at regional development

    Directory of Open Access Journals (Sweden)

    Vladimir Cini

    2013-12-01

    Full Text Available The oldest and largest sub-region in the world functioning on the principle of economic union is the European Union. The creation of a single market has initiated the process of conditional adjustment of markets in the EU member states, which has a significant impact on the social welfare of its citizens. It is necessary to tackle this issue by joint efforts within the European Union. As globalization processes push for economic integration and development of competitive advantage, the regions will have to make some challenging adjustments. The development tends to concentrate in highly competitive regions, while regions in the periphery lag behind. However, this pertains not only to the economic lag, but also to a potential negative political situation. Locally specific active employment policy measures are a continuation of the effort to make these measures more flexible. They refer to the Joint Assessment of Employment Policy Priorities and the IPA Human Resources Development Operational Programme - a regional policy instrument of the European Union. Both documents highlight the issue of disproportional development of regions, which requires special local measures and active labour market policy programmes. To reduce regional differences in development, it is necessary to invest more resources in the regions that lag behind. In this particular case, this means the counties in Croatia with high unemployment rates, a large number of registered unemployed persons and low employment rate. Consequently, this paper explains the importance of the adoption of locally specific measures for employment, which unfortunately did not take hold in the Republic of Croatia, and highlights the need for further decentralization of public services, with the aim of balancing regional development

  12. Youth take aim against AIDS | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2011-01-14

    Jan 14, 2011 ... An IDRC-supported project in Peru employs youthful creativity and advanced communication technology in the battle against HIV/AIDS. New information and communication technologies (ICTs) are becoming an increasingly common tool in the fight against HIV/AIDS.

  13. Motive activity as the criterion of efficiency of introduction of the technology which is aimed at the development of professionally significant physical qualities of pupils of clothing manufacture in vocational-technical schools

    Directory of Open Access Journals (Sweden)

    Vitaly Kaszuba

    2016-08-01

    Full Text Available Purpose: to carry out the analysis of results of researches of the forming experiment, and in particular, indicators of motive activity of respondents. Material & Methods: contingent: pupils of "Balty vocational-technical agrarian school" of Balty of the Odessa Region – 40 girls of the I course who do not go in for sports; methods: analysis of literature, pedagogical methods of the research, questioning, methods of mathematical statistics. Results: the data are analyzed, which are obtained in the forming experiment on the determination of level of motive activity by means of Framingham technique as one of the criteria of efficiency of introduction of the technology, which is directed to the improvement of professionally significant physical qualities of pupils of vocational-technical schools of clothing manufacture. Results of the questioning, which is directed to the identification subjective opinions of respondents concerning their motive activity, are analyzed. The results of questioning of pupils about the main conditions are presented, which are necessary for the involvement of students to the active physical improvement. Conclusions: the received results confirm the efficiency of the developed and introduced technology.

  14. Organizational technologies for transforming care: measures and strategies for pursuit of IOM quality aims.

    Science.gov (United States)

    Gamm, Larry; Kash, Bita; Bolin, Jane

    2007-01-01

    Progress on the Institute of Medicine's (IOM's) 6 aims to bridge the "quality chasm" requires both measurement and the concerting of multiple organizational technologies. The basic thesis of this article is that rapid progress on the IOM's multiple aims calls for transformative change within and among healthcare organizations. The promise of a number of types of transformative approaches is closely linked to their ability to simultaneously build upon several organizational technologies: clinical, social, information, and administrative technologies. To encourage and advance such efforts, this article identifies illustrative measures of attainment of the IOM's 6 aims or targeted areas for improvement that reflect the contributions of the 4 organizational technologies. It discusses examples of relationships between the IOM aims and the organizational technologies considered. Finally, the article offers illustrations of the interplay of these organizational technologies and IOM aims-across an array of organizational innovations with transformative potential. Included among such innovations are information technology in the form of electronic medical records, computer-based physician order entry, and patient health records; organization-wide patient-centered cultural change such as Studer's Hardwiring Excellence; Six Sigma and Toyota Production Management/LEAN; major clinical technology change, for example, minimally invasive cardiac surgery and broader treatment innovations such as disease management.

  15. Ambiguous Aims: English-Language Voluntourism as Development

    Science.gov (United States)

    Jakubiak, Cori

    2016-01-01

    "English-language voluntourism" is a practice whereby people from the Global North teach English in the Global South as an alternative form of travel and means of development assistance. As part of a larger, multisited ethnography, I investigate how in-service and former English-language voluntourism program participants frame short-term…

  16. EM Safety Innovations Aim Toward Safer Technologies and Better Information for Users

    Energy Technology Data Exchange (ETDEWEB)

    Lankford, M.; Geiger, J.; Carpenter, C.

    2002-02-26

    Beginning in 2000, the Department of Energy's Office of Environmental Management (EM), Office of Science and Technology (OST) has substantially re-examined and improved our approach to worker safety and health. Consistent with OST's responsibilities for safety, these initiatives can be categorized generally as: (1) Making our technologies inherently safer to use; and (2) Providing useful safety and health information about our technologies to the sites and technology operators. This evolved through a collaborative process by the EM Office of Safety, Health and Security, the EM Office of Science and Technology, EM Focus Areas and others. It was, initially, largely in response to a set of eight recommendations by the Environmental Management Advisory Board (EMAB) and to lessons learned from a serious accident in August, 2000 involving an OST-funded new technology. The cornerstone of this effort is the Policy for Occupational Safety and Health in EM's Science and Technology Program, issued in January 2001. DOE Focus Areas are focusing more attention on worker safety and health in their solicitations and procurement documents for new technology research and development (R&D) projects. EM Headquarters is working with Focus Areas, site environmental contractors, technology developers, and their respective DOE field organizations to ensure that roles and responsibilities for worker safety and health are clearly defined when a new technology is demonstrated at an environmental management site. The peer review process administered by the American Society of Mechanical Engineers (ASME) now requires technology developers to think through their approach to safety and health in a more detailed, focused way than previously. In Innovative Technology Summary Reports (ITSRs), developers are comparing their new technologies to baseline technologies on the basis of safety and health. Technology Safety Data Sheets (TSDSs) are being prepared for new technologies when

  17. Indian gas field development plan aims for quick production

    International Nuclear Information System (INIS)

    Banerjee, N.

    1992-01-01

    The development of a new oil or gas field involves construction of various downstream facilities such as field flow lines, trunk lines, oil and gas collecting and processing stations, and transportation to refineries and consuming centers. This paper reports that it is essential that these facilities be built on a schedule that allows the products to be transported and processed as early as possible. Unless such an approach is initiated, the wells producing crude oil or natural gas will need to be shut-in in the absence of the other relative facilities. For quick returns on the investments, a realistic program and careful evaluation of the schedule is needed to ensure that early commissioning of the fields is possible

  18. AIM Photonics: Tomorrow’s Technology at the Speed of Light

    Science.gov (United States)

    2016-09-01

    AIM) Integrated Photonics , where he focuses on creating new AIM business opportunities and is responsible for the effective and efficient operation of...AIM’s programs, including the State University of New York (SUNY) Polytechnic Institute’s strategic 300-millimeter (mm) integrated photonic ...design automation companies AIM Photonics Tomorrow’s Technology at the Speed of Light Michael Liehr Defense AT&L: September-October 2010 386

  19. Older adults' perceptions of technologies aimed at falls prevention, detection or monitoring: a systematic review.

    Science.gov (United States)

    Hawley-Hague, Helen; Boulton, Elisabeth; Hall, Alex; Pfeiffer, Klaus; Todd, Chris

    2014-06-01

    Over recent years a number of Information and Communication Technologies (ICTs) have emerged aiming at falls prevention, falls detection and alarms for use in case of fall. There are also a range of ICT interventions, which have been created or adapted to be pro-active in preventing falls, such as those which provide strength and balance training to older adults in the prevention of falls. However, there are issues related to the adoption and continued use of these technologies by older adults. This review provides an overview of older adults' perceptions of falls technologies. We undertook systematic searches of MEDLINE, EMBASE, CINAHL and PsychINFO, COMPENDEX and the Cochrane database. Key search terms included 'older adults', 'seniors', 'preference', 'attitudes' and a wide range of technologies, they also included the key word 'fall*'. We considered all studies that included older adults aged 50 and above. Studies had to include technologies related specifically to falls prevention, detection or monitoring. The Joanna Briggs Institute (JBI) tool and the Quality Assessment Tool for Quantitative Studies by the Effective Public Health Practice Project (EPHPP) were used. We identified 76 potentially relevant papers. Some 21 studies were considered for quality review. Twelve qualitative studies, three quantitative studies and 6 mixed methods studies were included. The literature related to technologies aimed at predicting, monitoring and preventing falls suggest that intrinsic factors related to older adults' attitudes around control, independence and perceived need/requirements for safety are important for their motivation to use and continue using technologies. Extrinsic factors such as usability, feedback gained and costs are important elements which support these attitudes and perceptions. Positive messages about the benefits of falls technologies for promoting healthy active ageing and independence are critical, as is ensuring that the technologies are simple

  20. Interventions aimed at improving the ability to use everyday technology in work after brain injury.

    Science.gov (United States)

    Kassberg, Ann-Charlotte; Prellwitz, Maria; Malinowsky, Camilla; Larsson-Lund, Maria

    2016-01-01

    The aim of this study was to explore and describe how client-centred occupational therapy interventions may support and improve the ability to use everyday technology (ET) in work tasks in people with acquired brain injury (ABI). A qualitative, descriptive multiple-case study was designed, and occupation-based interventions were provided to three working-age participants with ABI. Multiple sources were used to collect data throughout the three intervention processes, including assessments, field notes, and interviews. The Canadian Occupational Performance Measure and the Management of Everyday Technology Assessment were administered before the interventions, after the interventions and at a follow-up session 2-3 months subsequent to the interventions. The three intervention processes initially consisted of similar actions, but subsequently the actions took on a different focus and intensity for each case. All of the goals in each of the three case processes were achieved, and both perceived and observed abilities to use ET in work tasks improved. Client-centred occupational therapy interventions might have the potential to improve the ability to use ET in work tasks in people with ABI.

  1. A new technology aimed at re-establishing a global sulphur supply/demand balance

    International Nuclear Information System (INIS)

    Slavens, A.F.; Jorgensen, C.; Ogg, D.

    2009-01-01

    The world's sulphur supply is mainly determined by involuntary production of elemental sulphur during the processing of oil and gas. As a result, sulphur supply is decoupled from demand, resulting in an imbalance between the two. For almost two decades, sulphur supply has exceeded demand, which has raised significant concerns for oil and gas producers such as where to store all of the excess sulphur, and how to transport a low-value commodity to market in an economically attractive fashion. Black and Veatch is involved in the development of a new technology called sulphur to energy process (STEP TM ) which has the potential to assist in balancing global sulphur supply and demand, as well as affording other benefits such as low-emission energy production. This paper presented the potential merits of the STEP as a means to reestablish a global sulphur supply/demand balance for the world trading market. It explored the other potential benefits that may result from the use of this new technology and compared STEP to other technologies and operating schemes that regulate sulphur supply. It was concluded that STEP has the potential to allow the processor to produce elemental sulphur when demand is high, or to provide safe and ecological disposal when demand is low, with the added benefits of energy recovery from the sulphur combustion process, and sour gas reservoir sweetening over time as sulphur dioxide reacts with hydrogen sulphide present in the reservoir. 13 refs., 3 tabs., 22 figs

  2. Consuming technologies - developing routines

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2008-01-01

    technologies and in this article these processes will be investigated from three different perspectives: an historical perspective of how new technologies have entered homes, a consumer perspective of how both houses and new technologies are purchased and finally, as the primary part of the article, a user...... perspective of how routines develop while these technologies are being used. In the conclusion these insights are discussed in relation to possible ways of influencing routines....

  3. Graphite technology development plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-07-01

    This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

  4. Inaugural Technology Showcase Aims to Increase Industry Partnerships and Commercialization of Cancer-Related Inventions | FNLCR

    Science.gov (United States)

    Biotechnology stakeholders from across the region will have the opportunity to learn about cutting-edge technologies addressing urgent and intractable problems in cancer research at the 2017 Technology Showcase, to be held at the Frederick National

  5. AIM - Agile Instrumented Monitoring for Improving User Experience of Participation in HealthIT Development.

    Science.gov (United States)

    Pitkänen, Janne; Nieminen, Marko

    2017-01-01

    Participation of healthcare professionals in information technology development has emerged as an important challenge. As end-users, the professionals are willing to participate in the development activities, but their experiences on the current methods of participation remain mostly negative. There is lack of applicable methods for meeting the needs of agile development approach and scaling up to the largest implementation projects, while maintaining the interest of the professional users to participate in development activities and keeping up their ability to continue working in a productive manner. In this paper, we describe the Agile Instrumented Monitoring as a methodology, based on the methods of instrumented usability evaluation, for improving user experience in HealthIT development. The contribution of the proposed methodology is analyzed in relation to activities of whole iteration cycle and chosen usability evaluation methods, while the user experience of participation is addressed regarding healthcare professionals. Prospective weak and strong market tests for AIM are discussed in the conclusions for future work.

  6. Advanced Mirror Technology Development

    Science.gov (United States)

    Stahl, H. Philip

    2017-01-01

    The Advanced Mirror Technology Development (AMTD) project matures critical technologies required to enable ultra-stable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics and ultra-high-contrast observations of exoplanets.

  7. Ocean Technology Development Tank

    Data.gov (United States)

    Federal Laboratory Consortium — The new SWFSC laboratory in La Jolla incorporates a large sea- and fresh-water Ocean Technology Development Tank. This world-class facility expands NOAA's ability to...

  8. Technology research and development

    International Nuclear Information System (INIS)

    Haas, G.M.; Abdov, M.A.; Baker, C.C.; Beuligmann, R.F.

    1985-01-01

    The U.S. Dept. of Energy discusses the new program plan, the parameters of which are a broad scientific and technology knowledge base, an attractive plasma configuration to be determined, and other issues concerning uncertainty as to what constitutes attractive fusion options to be determined in the future, and increased collaboration. Tables show changing directions in magnetic fusion energy, two examples of boundary condition impacts on long-term technology development, and priority classes of the latter. The Argonne National Laboratory comments on the relationship between science, technology and the engineering aspects of the fusion program. UCLA remarks on the role of fusion technology in the fusion program plan, particularly on results from the recent studies of FINESSE. General Dynamics offers commentary on the issues of a reduced budget, and new emphasis on science which creates an image of the program. A table illustrates technology research and development in the program plan from an industrial perspective

  9. Fusion development and technology

    International Nuclear Information System (INIS)

    Montgomery, D.B.

    1991-01-01

    This report discusses the following topics: superconducting magnet technology high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies -- Aries; ITER physics; ITER superconducting PF scenario and magnet analysis; and safety, environmental and economic factors in fusion development

  10. Technology transfer for development

    International Nuclear Information System (INIS)

    Abraham, D.

    1990-07-01

    The IAEA has developed a multifaceted approach to ensure that assistance to Member States results in assured technology transfer. Through advice and planning, the IAEA helps to assess the costs and benefits of a given technology, determine the basic requirements for its efficient use in conditions specific to the country, and prepare a plan for its introduction. This report describes in brief the Technical Co-operation Programmes

  11. Development of Radioisotope Tracer Technology

    International Nuclear Information System (INIS)

    Jung, Sung Hee; Jin, Joon Ha; Kim, Jong Bum; Kim, Jin Seop; Kim, Jae Jo; Park, Soon Chul; Lim, Don Soon; Choi, Byung Jong; Jang, Dong Soon; Kim, Hye Sook

    2007-06-01

    The project is aimed to develop the radiotracer technology for process optimization and trouble-shooting to establish the environmental and industrial application of radiation and radioisotopes. The advanced equipment and software such as high speed data acquisition system, RTD model and high pressure injection tool have developed. Based on the various field application to the refinery/petrochemical industries, the developed technology was transfer to NDT company for commercial service. For the environmental application of radiotracer technology, injector, detector sled, core sampler, RI and GPS data logging system are developed and field tests were implemented successfully at Wolsung and Haeundae beach. Additionally tracer technology were also used for the performance test of the clarifier in a wastewater treatment plant and for the leak detection in reservoirs. From the experience of case studies on radiotracer experiment in waste water treatment facilities, 'The New Excellent Technology' is granted from the ministry of environment. For future technology, preliminary research for industrial gamma transmission and emission tomography which are new technology combined with radioisotope and image reconstruction are carried out

  12. Fusion development and technology

    International Nuclear Information System (INIS)

    Montgomery, D.B.

    1992-01-01

    This report discusses the following: superconducting magnet technology; high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies--aries; ITER physics: alpha physics and alcator R ampersand D for ITER; lower hybrid current drive and heating in the ITER device; ITER superconducting PF scenario and magnet analysis; ITER systems studies; and safety, environmental and economic factors in fusion development

  13. Fusion development and technology

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, D.B.

    1992-01-01

    This report discusses the following: superconducting magnet technology; high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies--aries; ITER physics: alpha physics and alcator R D for ITER; lower hybrid current drive and heating in the ITER device; ITER superconducting PF scenario and magnet analysis; ITER systems studies; and safety, environmental and economic factors in fusion development.

  14. Biofuel technologies. Recent developments

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Vijai Kumar [National Univ. of Ireland Galway (Ireland). Dept. of Biochemistry; MITS Univ., Rajasthan (India). Dept. of Science; Tuohy, Maria G. (eds.) [National Univ. of Ireland Galway (Ireland). Dept. of Biochemistry

    2013-02-01

    Written by experts. Richly illustrated. Of interest to both experienced researchers and beginners in the field. Biofuels are considered to be the main potential replacement for fossil fuels in the near future. In this book international experts present recent advances in biofuel research and related technologies. Topics include biomethane and biobutanol production, microbial fuel cells, feedstock production, biomass pre-treatment, enzyme hydrolysis, genetic manipulation of microbial cells and their application in the biofuels industry, bioreactor systems, and economical processing technologies for biofuel residues. The chapters provide concise information to help understand the technology-related implications of biofuels development. Moreover, recent updates on biofuel feedstocks, biofuel types, associated co- and byproducts and their applications are highlighted. The book addresses the needs of postgraduate researchers and scientists across diverse disciplines and industrial sectors in which biofuel technologies and related research and experimentation are pursued.

  15. Titanium Aluminide Casting Technology Development

    Science.gov (United States)

    Bünck, Matthias; Stoyanov, Todor; Schievenbusch, Jan; Michels, Heiner; Gußfeld, Alexander

    2017-12-01

    Titanium aluminide alloys have been successfully introduced into civil aircraft engine technology in recent years, and a significant order volume increase is expected in the near future. Due to its beneficial buy-to-fly ratio, investment casting bears the highest potential for cost reduction of all competing production technologies for TiAl-LPTB. However, highest mechanical properties can be achieved by TiAl forging. In view of this, Access e.V. has developed technologies for the production of TiAl investment cast parts and TiAl die cast billets for forging purposes. While these parts meet the highest requirements, establishing series production and further optimizing resource and economic efficiency are present challenges. In order to meet these goals, Access has recently been certified according to aircraft standards, aiming at qualifying parts for production on technology readiness level 6. The present work gives an overview of the phases of development and certification.

  16. Development of gas analyzer to aim for speed and high sensitivity and shaping of mass spectrum

    International Nuclear Information System (INIS)

    Hatano, Toshihisa; Hiratsuka, Hajime; Abe, Tetsuya

    2011-01-01

    The gas analysis system with EI-QMS (Electron Ionization-Quadrupole Mass Spectrometer) developed by Japan Atomic Energy Agency (JAEA) is commercially available from a private company through a technology transfer. The system has already been used to a medical field such as breath analysis, a quality control of automobile casting parts made of recycled aluminum, and a measurement of food aromatic elements emitting from vegetable and sake. A pulse gas sampling and a continuous evacuation were integrated to the system that aimed at obtaining high sensitive and stable mass spectrum and accomplishing fast measurement prepared for 100% inspection of industrial parts and various foods. As a result, the system achieved a background pressure of 10 -7 Pa and a background ion current of 10 -13 A in the normal condition. An intensity of the mass spectrum decreased linearly with decreasing the pressure by the continuous evacuation, therefore, the intensity of the mass spectrum was corrected by the pump down curve, which is a new mathematical approach equivalent to a constant pressure curve. It was confirmed that the system had the sensing performance of 100 ppb. (author)

  17. ABC Technology Development Program

    International Nuclear Information System (INIS)

    1994-01-01

    The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: 'Provide a weapon's grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon's grade plutonium to be disposed on in [20] years.' This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance that meets or exceeds that afforded to the public by modern commercial nuclear power plants; meet or exceed all applicable federal, state, and local regulations or standards for environmental compliance; manage the program in a cost effective manner. The ABC Technology Development Program defines the technology development activities that are required to accomplish this mission. The technology development tasks are related to the following topics: blanket system; vessel systems; reactivity control systems; heat transport system components; energy conversion systems; shutdown heat transport systems components; auxiliary systems; technology demonstrations - large scale experiments

  18. Robotics Technology Development Program

    International Nuclear Information System (INIS)

    1994-02-01

    The Robotics Technology Development Program (RTDP) is a ''needs-driven'' effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE's Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination ampersand Dismantlement (D ampersand D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D ampersand D and CC ampersand AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas

  19. Making a difference in LDCs. IAEA partnerships support aims in least developed countries

    International Nuclear Information System (INIS)

    Kastens, Royal; Volkoff, Alex

    2001-01-01

    No single organization can realize the world's goals for sustainable development. Broad engagement with a variety of factors is needed. This is especially the case to help determine where science and technology can play the best role, particularly in Least Developed Countries (LDCs). One mechanism which the IAEA Technical Cooperation Programme uses for nuclear science and technology is regional agreements between governments. This brings a double benefit: it strengthens technical self-reliance and it enables more advanced institutions within a region to act as technical mentors for less advanced ones, particularly those in LDCs. The Technical Cooperation Programme for LDCs is built upon development of human resources through advanced training and expert support. Several regional projects, for example, focus upon graduate level courses in nuclear science and technology for scientists. However, deteriorating economic situation in many LDCs make it difficult for some counterpart institutions to sustain the outcomes of projects. A new strategy was adopted in 1995, to alleviate the underlying constraints. Upon request, essential spare parts and consumables which are not locally available are provided to facilitate, in particular, continuation of activities related to completed technical cooperation projects. Expert services are also utilized for consultancy missions and to assist in organizing local training events. To reinforce the scientific and technological base, training opportunities offer a 'sandwich pattern', leading to advanced degrees in basic sciences and nuclear technology as part of an alternate (local-overseas) educational training programme

  20. Transmutation Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Song, T. Y.; Park, W. S.; Kim, Y. H. (and others)

    2007-06-15

    The spent fuel coming from the PWR is one of the most difficult problems to be solved for the continuous use of nuclear power. It takes a few million years to be safe under the ground. Therefore, it is not easy to take care of the spent fuel for such a long time. Transmutation technology is the key technology which can solve the spent fuel problem basically. Transmutation is to transmute long-lived radioactive nuclides in the spent fuel into short-lived or stable nuclide through nuclear reactions. The long-lived radioactive nuclides can be TRU and fission products such as Tc-99 and I-129. Although the transmutation technology does not make the underground disposal totally unnecessary, the period to take care of the spent fuel can be reduced to the order of a few hundred years. In addition to the environmental benefit, transmutation can be considered to recycle the energy in the spent fuel since the transmutation is performed through nuclear fission reaction of the TRU in the spent fuel. Therefore, transmutation technology is worth being developed in economical aspect. The results of this work can be a basis for the next stage research. The objective of the third stage research was to complete the core conceptual design and verification of the key technologies. The final results will contribute to the establishment of Korean back end fuel cycle policy by providing technical guidelines.

  1. ECH Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Temkin, Richard [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2014-12-24

    Electron Cyclotron Heating (ECH) is needed for plasma heating, current drive, plasma stability control, and other applications in fusion energy sciences research. The program of fusion energy sciences supported by U. S. DOE, Office of Science, Fusion Energy Sciences relies on the development of ECH technology to meet the needs of several plasma devices working at the frontier of fusion energy sciences research. The largest operating ECH system in the world is at DIII-D, consisting of six 1 MW, 110 GHz gyrotrons capable of ten second pulsed operation, plus two newer gyrotrons. The ECH Technology Development research program investigated the options for upgrading the DIII-D 110 GHz ECH system. Options included extending present-day 1 MW technology to 1.3 – 1.5 MW power levels or developing an entirely new approach to achieve up to 2 MW of power per gyrotron. The research consisted of theoretical research and designs conducted by Communication and Power Industries of Palo Alto, CA working with MIT. Results of the study would be validated in a later phase by research on short pulse length gyrotrons at MIT and long pulse / cw gyrotrons in industry. This research follows a highly successful program of development that has led to the highly reliable, six megawatt ECH system at the DIII-D tokamak. Eventually, gyrotrons at the 1.5 megawatt to multi-megawatt power level will be needed for heating and current drive in large scale plasmas including ITER and DEMO.

  2. Graphite Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; T. Burchell; R. Bratton

    2007-09-01

    This technology development plan is designed to provide a clear understanding of the research and development direction necessary for the qualification of nuclear grade graphite for use within the Next Generation Nuclear Plant (NGNP) reactor. The NGNP will be a helium gas cooled Very High Temperature Reactor (VHTR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Considerable effort will be required to ensure that the graphite performance is not compromised during operation. Based upon the perceived requirements the major data needs are outlined and justified from the perspective of reactor design, reatcor performance, or the reactor safety case. The path forward for technology development can then be easily determined for each data need. How the data will be obtained and the inter-relationships between the experimental and modeling activities will define the technology development for graphite R&D. Finally, the variables affecting this R&D program are discussed from a general perspective. Factors that can significantly affect the R&D program such as funding, schedules, available resources, multiple reactor designs, and graphite acquisition are analyzed.

  3. Development of Radiochemical Separation Technology

    International Nuclear Information System (INIS)

    Lee, Eil Hee; Kim, K. W.; Yang, H. B.

    2007-06-01

    This project of the second phase was aimed at the development of basic unit technologies for advanced partitioning, and the application tests of pre-developed partitioning technologies for separation of actinides by using a simulated multi-component radioactive waste containing Am, Np, Tc, U and so on. The goals for recovery yield of TRU, and for purity of Tc are high than 99% and about 99%, respectively. The work scopes and contents were as follows. 1). For the development of basic unit technologies for advanced partitioning. 1. Development of technologies for co-removal of TRU and for mutual separation of U and TRU with a reduction-complexation reaction. 2. Development of extraction system for high-acidity co-separation of An(+3) and Ln(+3) and its radiolytic evaluation. 3. Synthesis of extractants for the selective separation of An(+3) and its relevant extraction system development. 4. Development of a hybrid system for the recovery of noble metals and its continuous separation tests. 5. Development of electrolytic system for the decompositions of N-NO3 and N-NH3 compounds to nitrogen gas. 2). For the application test of pre-developed partitioning technologies for the separation of actinide elements in a simulated multi-component solution equivalent to HLW level. 1. Co-separation of Tc, Np and U by a (TBP-TOA)/NDD system. 2. Mutual-separation of Am, Cm and RE elements by a (Zr-DEHPA)/NDD system. All results will be used as the fundamental data for the development of advanced partitioning process in the future

  4. Development of Radiochemical Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eil Hee; Kim, K. W.; Yang, H. B. (and others)

    2007-06-15

    This project of the second phase was aimed at the development of basic unit technologies for advanced partitioning, and the application tests of pre-developed partitioning technologies for separation of actinides by using a simulated multi-component radioactive waste containing Am, Np, Tc, U and so on. The goals for recovery yield of TRU, and for purity of Tc are high than 99% and about 99%, respectively. The work scopes and contents were as follows. 1). For the development of basic unit technologies for advanced partitioning. 1. Development of technologies for co-removal of TRU and for mutual separation of U and TRU with a reduction-complexation reaction. 2. Development of extraction system for high-acidity co-separation of An(+3) and Ln(+3) and its radiolytic evaluation. 3. Synthesis of extractants for the selective separation of An(+3) and its relevant extraction system development. 4. Development of a hybrid system for the recovery of noble metals and its continuous separation tests. 5. Development of electrolytic system for the decompositions of N-NO3 and N-NH3 compounds to nitrogen gas. 2). For the application test of pre-developed partitioning technologies for the separation of actinide elements in a simulated multi-component solution equivalent to HLW level. 1. Co-separation of Tc, Np and U by a (TBP-TOA)/NDD system. 2. Mutual-separation of Am, Cm and RE elements by a (Zr-DEHPA)/NDD system. All results will be used as the fundamental data for the development of advanced partitioning process in the future.

  5. Graphite Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; T. Burchell; M.Carroll

    2010-10-01

    The Next Generation Nuclear Plant (NGNP) will be a helium-cooled High Temperature Gas Reactor (HTGR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Graphite has been used effectively as a structural and moderator material in both research and commercial high-temperature gas-cooled reactors. This development has resulted in graphite being established as a viable structural material for HTGRs. While the general characteristics necessary for producing nuclear grade graphite are understood, historical “nuclear” grades no longer exist. New grades must be fabricated, characterized, and irradiated to demonstrate that current grades of graphite exhibit acceptable non-irradiated and irradiated properties upon which the thermomechanical design of the structural graphite in NGNP is based. This Technology Development Plan outlines the research and development (R&D) activities and associated rationale necessary to qualify nuclear grade graphite for use within the NGNP reactor.

  6. Developing technologies and resources

    International Nuclear Information System (INIS)

    Walker, R.S.

    2015-01-01

    Our success as a nuclear nation rests on interdependent pillars involving industry, governments, regulators, and academia. In a context of coherent public policy, we must achieve: 5 Nuclear Industry Priorities: Ensure refurbishments are completed to cost and schedule; Achieve Canadian supply chain success in international nuclear business; Support a strong Canadian nuclear science, technology and innovation agenda; Enhance the supply of skilled workers; Develop a coordinated and integrated strategy for the long term management of all radioactive waste materials; Refine communication strategies informed by insights from social sciences. Canada's nuclear sector has the opportunity to adapt to the opportunities presented by having a national laboratory in Canada.

  7. Development of sodium technology

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Sung Tai; Nam, H. Y.; Choi, Y. D. [and others

    2000-05-01

    The objective of present study is to produce the experimental data for development and verification of computer codes for development of LMR and to develop the preliminary technologies for the future large scale verification experiments. A MHD experimental test loop has been constructed for the quantitative analysis of the effect of magnetic field on the sodium flow and experiments are carried out for three EM pumps. The previous pressure drop correlations are evaluated using the experimental data obtained from the pressure drop experiment in a 19-pin fuel assembly with wire spacer. An dimensionless variable is proposed to describe the amplitude and frequency of the fluctuation of free surface using the experimental data obtained from free surface experimental apparatus and an empirical correlation is developed using this dimensionless variable. An experimental test loop is constructed to measure the flow characteristics in IHX shell side and the local pressure drop in fuel assembly, and to test the vibration behaviour of fuel pins due to flow induced vibration. The sodium two-phase flow measuring technique using the electromagnetic flowmeter is developed and the sodium differential pressure drop measuring technique using the method of direct contact of sodium and oil is established. The work on the analysis of sodium fire characteristics and produce data for vlidation of computer code is performed. Perfect reopen time of self plugged leak path was observed to be about 130 minutes after water leak initiation. Reopen shape of a specimen appeared to be double layer of circular type, and reopen size of this specimen surface was about 2mm diameter on sodium side. In small water leakage experiments, the following correlation equation about the reopen time between sodium temperature and initial leak rate was obtained, {tau}{sub c} = {delta}{center_dot}g{sup -0.83}{center_dot}10{sup (3570/T{sub Na}-3.34)}, in 400-500 deg C of liquid sodium atmosphere. The characteristics

  8. Development of sodium technology

    International Nuclear Information System (INIS)

    Hwang, Sung Tai; Nam, H. Y.; Choi, Y. D.

    2000-05-01

    The objective of present study is to produce the experimental data for development and verification of computer codes for development of LMR and to develop the preliminary technologies for the future large scale verification experiments. A MHD experimental test loop has been constructed for the quantitative analysis of the effect of magnetic field on the sodium flow and experiments are carried out for three EM pumps. The previous pressure drop correlations are evaluated using the experimental data obtained from the pressure drop experiment in a 19-pin fuel assembly with wire spacer. An dimensionless variable is proposed to describe the amplitude and frequency of the fluctuation of free surface using the experimental data obtained from free surface experimental apparatus and an empirical correlation is developed using this dimensionless variable. An experimental test loop is constructed to measure the flow characteristics in IHX shell side and the local pressure drop in fuel assembly, and to test the vibration behaviour of fuel pins due to flow induced vibration. The sodium two-phase flow measuring technique using the electromagnetic flowmeter is developed and the sodium differential pressure drop measuring technique using the method of direct contact of sodium and oil is established. The work on the analysis of sodium fire characteristics and produce data for vlidation of computer code is performed. Perfect reopen time of self plugged leak path was observed to be about 130 minutes after water leak initiation. Reopen shape of a specimen appeared to be double layer of circular type, and reopen size of this specimen surface was about 2mm diameter on sodium side. In small water leakage experiments, the following correlation equation about the reopen time between sodium temperature and initial leak rate was obtained, τ c = δ·g -0.83 ·10 (3570/T Na -3.34) , in 400-500 deg C of liquid sodium atmosphere. The characteristics of pressure propagation and gas flow, and

  9. Technology Development Facility (TDF)

    International Nuclear Information System (INIS)

    Doggett, J.N.

    1982-01-01

    We have been studying small, driven, magnetic-mirror-based fusion reactors for the Technology Development Facility (TDF), that will test fusion reactor materials, components, and subsystems. Magnetic mirror systems are particularly interesting for this application because of their inherent steady-state operation, potentially high neutron wall loading, and relatively small size. Our design is a tandem mirror device first described by Fowler and Logan, based on the physics of the TMX experiments at Lawrence Livermore National Laboratory (LLNL). The device produces 20 MW of fusion power with a first-wall, uncollided 14-MeV neutron flux of 1.4 MW/m 2 on an area of approximately 8 m 2 , while consuming approximately 250 MW of electrical power. The work was done by a combined industrial-laboratory-university group

  10. Development of Korea telecommunication technology

    International Nuclear Information System (INIS)

    1992-06-01

    It concentrates on development of Korea telecommunication technology, which is made up seven chapters. It gives description of manual central telephone exchange or private automatic telephone exchange, transmission technology on wire line and cable line technology and optical transmission, radio communication technology on mobile and natural satellite communication, network technology with intelligent network, broadband ISDN and packet switched Data Network, terminal technology with telephone and data communication terminal and development of Information Technology in Korea. It has an appendix about development of military communication system.

  11. Technology Development of Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Dong; Kang, H. Y.; Ko, W. I. (and others)

    2007-04-15

    The objective of this project is to perform R and D on the essential technologies in nuclear material measurement and surveillance and verification system, and to improve the state of being transparent on the nuclear material management of DUPIC Fuel Development Facility (DFDF) through the evaluation of safeguard ability on non-proliferation fuel cycle and nuclear proliferation resistance. Nuclear material position scan system for the reduction of measurement error was developed for the spatial distribution search of spent fuel in DUPIC facility. Web-based realtime remote monitoring system was designed and constructed for satisfying the IAEA's performance criteria of continuous monitoring, and also developed a software for the function of remote control and message. And diversion paths in a proliferation resistant pyroprocess for SFR were analyzed and its protecting system against the diversion paths were suggested for enhancing proliferation resistance of advanced nuclear fuel cycle. These results could be used for planning the further R and D items in the area of safeguards. Those R and D results mentioned above would be helpful for increasing Korean nuclear transparency in the future.

  12. Developments in lubricant technology

    CERN Document Server

    Srivastava, S P

    2014-01-01

    Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

  13. MELTED BUTTER TECHNOLOGY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    L. V. Golubeva

    2014-01-01

    Full Text Available Summary. Melted butter is made from dairy butter by rendering the fat phase. It has specific taste and aroma, high-calorie content and good assimilability. Defects of butter which appeared during the storage causes by the development of microbiological processes or by the chemical oxidation. On the development of these processes influence quality and composition of fresh butter, its physical structure, content of the increased amount of gas phase and content of heavy metals, storage conditions. Microbiological spoilage of butter occurs generally due to damage of plasma which is good environment for the development of microorganisms. Defects of microbiological origin include: unclean, sour, moldy, yeasty, cheesy, bitter taste. Defects of test and smell chemical origin are formed due to hydrolytic digestion of lipids. It's prevailed at long storage of butter in the conditions of freezing temperatures. It's picked out the following main processes of spoiling: souring, acidifying and sallowness. Often these processes take place simultaneously.It has been investigated melted butter with lactated additive. The latter improves the microbiological and toxicological safety, prolongs the storage condition of the products. Technological efficiency of the additives is achieved by a multilayer products formation from the inactive bound water, preventing microorganisms growth and by the barrier layer with lactate inhibiting hydrolytic reactions. Oil samples were obtained with the batch-type butter maker application, then they were melted and after that lactated additive were supplemented. It has been studied organoleptic and physico-chemical indices of the melted butter samples. The fatty-acid composition of melted butter were studied. Comparative analysis of fatty-acid composition of cow's milk fat and produced melted butter has shown their similarity. Also in the last sample there is increased weight fraction of linoleic and linolenic acids. The obtained

  14. Development of a Minimum Data Set (MDS) for C-Section Anesthesia Information Management System (AIMS).

    Science.gov (United States)

    Sheykhotayefeh, Mostafa; Safdari, Reza; Ghazisaeedi, Marjan; Khademi, Seyed Hossein; Seyed Farajolah, Seyedeh Sedigheh; Maserat, Elham; Jebraeily, Mohamad; Torabi, Vahid

    2017-04-01

    Caesarean section, also known as C-section, is a very common procedure in the world. Minimum data set (MDS) is defined as a set of data elements holding information regarding a series of target entities to provide a basis for planning, management, and performance evaluation. MDS has found a great use in health care information systems. Also, it can be considered as a basis for medical information management and has shown a great potential for contributing to the provision of high quality care and disease control measures. The principal aim of this research was to determine MDS and required capabilities for Anesthesia information management system (AIMS) in C-section in Iran. Data items collected from several selected AIMS were studied to establish an initial set of data. The population of this study composed of 115 anesthesiologists was asked to review the proposed data elements and score them in order of importance by using a five-point Likert scale. The items scored as important or highly important by at least 75% of the experts were included in the final list of minimum data set. Overall 8 classes of data (consisted of 81 key data elements) were determined as final set. Also, the most important required capabilities were related to airway management and hypertension and hypotension management. In the development of information system (IS) based on MDS and identification, because of the broad involvement of users, IS capabilities must focus on the users' needs to form a successful system. Therefore, it is essential to assess MDS watchfully by considering the planned uses of data. Also, IS should have essential capabilities to meet the needs of its users.

  15. Enabling professionals to change practices aimed at tackling social inequality through professional development

    DEFF Research Database (Denmark)

    Jensen, Bente; Brandi, Ulrik

    2018-01-01

    Research has shown the potential for early childhood education and care (ECEC) in making a difference for all children. However, research also highlights how hard overcoming the ‘gaps’ between children from differing social backgrounds still is. The overall aim of this article is to examine the i...... inequality. The study emphasises that practices are enhanced through professional development that makes sense for participants, is organised in communities of practices (CoP) and communities of innovation (CoI), and is facilitated and integrated in entire ECEC systems...... conditions and well-being of all children, and socially disadvantaged children in particular. The overall argument is that co-construction as well as openness and reflection in the ECEC field is needed when professionals are to change their pedagogical practices towards tackling the issues of social...

  16. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  17. Evaluating public education messages aimed at monitoring and responding to social interactive technology on smartphones among young drivers.

    Science.gov (United States)

    Gauld, Cassandra S; Lewis, Ioni; White, Katherine M; Fleiter, Judy J; Watson, Barry

    2017-07-01

    Young drivers are more likely than any other age group to access social interactive technology (e.g., Facebook, E-mail) on a smartphone while driving. The current study formed part of a larger investigation and was guided by The Step Approach to Message Design and Testing (SatMDT) to evaluate the relative effectiveness of three different public education messages aimed at reducing smartphone use among young drivers. The messages were each adapted to the specific behaviours of monitoring/reading and responding to social interactive technology on smartphones. Participants (n=288; 199F, 89M) were drivers aged 17-25 years who resided in the Australian state of Queensland. Message acceptance (i.e., intention and effectiveness) and message rejection were both assessed using a self-report survey. Multivariate analyses found that, overall, the messages targeting monitoring/reading behaviour were considered more effective than those targeting responding behaviour. The message that challenged the underlying motivation that believing you are a good driver makes it easier to monitor/read social interactive technology while driving was considered particularly effective by young male drivers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Smart Fabrics Technology Development

    Science.gov (United States)

    Simon, Cory; Potter, Elliott; Potter, Elliott; McCabe, Mary; Baggerman, Clint

    2010-01-01

    Advances in Smart Fabrics technology are enabling an exciting array of new applications for NASA exploration missions, the biomedical community, and consumer electronics. This report summarizes the findings of a brief investigation into the state of the art and potential applications of smart fabrics to address challenges in human spaceflight.

  19. Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

    International Nuclear Information System (INIS)

    Brockbank, B.R.

    1995-03-01

    In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges

  20. The development of information technologies

    OpenAIRE

    Kostúr Karol

    2002-01-01

    The contribution analyses the tasks information technologies in industry. At present time is the problem of connecting mutual variously levels of management. Therefore, first priority is an integration of information technologies. The information technologies for enterprise management are analysed. The product SAP R/3 appears as suitable for top management. The SAP R/3 Enterprise has a new technology so call web-server. This server enables the integration with e-business. The development my S...

  1. Assessing biofuels: Aiming for sustainable development or complying with the market?

    International Nuclear Information System (INIS)

    Diaz-Chavez, Rocio A.

    2011-01-01

    The growing interest in biofuels has led to increasing concern about their wider implications, particularly if grown for transport use in large scale. Such concerns include environmental, social and economic issues. To counterbalance the possible negative effects, a series of measures are being put in place to help their sustainability. Nevertheless, considering the different meanings of sustainability in different parts of the world and the need to expand productive rural activities, the differences between trying to assure a commodity and the benefits or impacts at local level raise the questions between the aims of sustainability and the need to comply with a market. The ideal situation would be to reconcile both aspects, which in practise represent a major challenge for governments and industry. This paper provides an overview on the sustainability assessment of biofuels to consider a possible way forward. - Highlights: → Multi-interactions in biomass production for bioenergy are a new paradigm to develop policies. → Certification and verification schemes are limited to assess broader sustainability issues. → Improved agricultural and forestry systems for biomass use will boost policies and investment.

  2. 20 years TraumaRegister DGU(®): development, aims and structure.

    Science.gov (United States)

    2014-10-01

    The TraumaRegister DGU(®) organisational and technical development has undergone an evolution process, which started 20 years ago. Currently, the management of the registry is under the management of the "AUC - Academy for Trauma Surgery" (infrastructure) and the "Sektion NIS" (scientific responsibility). The aim of the registry was to establish an inter-hospital quality assessment tool with the option to use the increasing database for scientific evaluations of acute care. Year after year and most recently with the obligatory participation of certified hospitals the number of participating hospitals has grown as well as the registered cases per annum. Recently, even hospitals from other countries joined the registry too. Starting with six German hospitals and 260 cases in 1993, 20 years later more than 600 hospitals from eleven countries deliver over 30,000 trauma cases per year resulting in over 150,000 reported cases until 2013. In this article a historical perspective is presented of the evolution and current status of the TraumaRegister DGU(®). Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Forward-Looking Planning of Technology Development

    Directory of Open Access Journals (Sweden)

    Katarzyna Halicka

    2015-12-01

    Full Text Available The main aim of this article is to adapt the Future-Oriented Technology Analysis (FTA to prospective planning of technology development. Firstly, the article presents the assumptions, methods and idea, as well as the concept of the FTA method. Moreover, selected publications on the use of this method were analysed. Then, an original, base model of forward-looking planning of technology development was constructed and presented. The end result of this process will be the development of the localized in time, presented in graphic form, action plan referred to as the route of technology development. Basing on the literature review and the research projects a preliminary route of development of arbitrarily chosen technology was also built and presented.

  4. Working Environment and Technological Development

    DEFF Research Database (Denmark)

    Clausen, Christian; Nielsen, Klaus T.; Jensen, Per Langaa

    1997-01-01

    The paper describes the purpose, themes, overarching research questions and specific projects of the programme: Working Environment and Technological Development. The major research themes are:1) Management concepts and the working environment, which considers the visions...... and their and their concept of working environment2) Technology renewal, which considers the role of the working environment in connection with the development and use of concrete technologies3) Working environment planning, which considers the existing efforts to place the working environment in a planning process....

  5. Summary of instructor training program in FY2014 aiming at Asian countries introducing nuclear technologies for peaceful use (Contract program)

    International Nuclear Information System (INIS)

    Hidaka, Akihide; Nakano, Yoshihiro; Watanabe, Yoko; Arai, Nobuyoshi; Sawada, Makoto; Nakamura, Jinichi; Sakurai, Takeshi; Torata, Shinichiro; Nakamura, Kazuyuki; Yamashita, Kiyonobu; Kanaizuka, Seiichi; Katogi, Aki; Shimada, Mayuka; Ishikawa, Tomomi; Ebine, Masako

    2016-07-01

    Japan Atomic Energy Agency (JAEA) has been conducting the Instructor Training Program (ITP) since 1996 under auspices of MEXT (Ministry of Education, Culture, Sports, Science and Technology) to contribute effectively to human resource development in Asian countries in the field of radiation utilization for seeking peaceful use of nuclear energy. ITP consists of Instructor Training Course (ITC), Nuclear Technology Seminars held in Japan and the Follow-up Training Course (FTC) which is organized by past ITC participants in their home countries. In the ITP, lectures, exercises and facility visits relating to radiation utilization are performed in Japan by inviting nuclear related people from Asian countries to Japan and by dispatching Japanese lecturers to Asian countries in order to enhance their knowledge or technology and to cultivate technical lecturers in their home countries. In addition, the R and D information obtained through the ITP is broadly provided for local people near NPPs in Japan and Asian countries through the preparation of News Letters. The steering committee meeting is held every year at ITP participating countries to hear their comments and to reflect them on ITP. The ITP participating countries in FY2014 are 11 countries such as Bangladesh, China, Indonesia, Kazakhstan, Malaysia, Mongolia, Philippines, Sri Lanka, Thailand, Turkey and Vietnam. The present report describes the activities of FY2014 ITP and future challenges for improving ITP more effectively. (author)

  6. A methodology aimed at fostering and sustaining the development processes of an IE-based industry

    Science.gov (United States)

    Corallo, Angelo; Errico, Fabrizio; de Maggio, Marco; Giangreco, Enza

    In the current competitive scenario, where business relationships are fundamental in building successful business models and inter/intra organizational business processes are progressively digitalized, an end-to-end methodology is required that is capable of guiding business networks through the Internetworked Enterprise (IE) paradigm: a new and innovative organizational model able to leverage Internet technologies to perform real-time coordination of intra and inter-firm activities, to create value by offering innovative and personalized products/services and reduce transaction costs. This chapter presents the TEKNE project Methodology of change that guides business networks, by means of a modular and flexible approach, towards the IE techno-organizational paradigm, taking into account the competitive environment of the network and how this environment influences its strategic, organizational and technological levels. Contingency, the business model, enterprise architecture and performance metrics are the key concepts that form the cornerstone of this methodological framework.

  7. Research and development aimed at enabling Industry 4.0 from a cybersecurity perspective

    CSIR Research Space (South Africa)

    Mtsweni, Jabu

    2017-10-01

    Full Text Available system monitoring Energy harvesting Source quality monitoring Waste water management Pressure monitoring Leakage detection Water quality monitoring Smart metering ‹#› Cyber[in]security thinking for Industry 4.0… Technology ‹#› • Secure... infrastructure sectors ICTs Finance Manufacturing Food Health Energy Utilities Water Transportation Safety Government ‹#› Benefits and risks Doing smart things (Innovation) Doing things smarter (efficiency and agility) Wider risk surface (safety...

  8. Low dark current MCT-based focal plane detector arrays for the LWIR and VLWIR developed at AIM

    Science.gov (United States)

    Gassmann, Kai Uwe; Eich, Detlef; Fick, Wolfgang; Figgemeier, Heinrich; Hanna, Stefan; Thöt, Richard

    2015-10-01

    For nearly 40 years AIM develops, manufactures and delivers photo-voltaic and photo-conductive infrared sensors and associated cryogenic coolers which are mainly used for military applications like pilotage, weapon sights, UAVs or vehicle platforms. In 2005 AIM started to provide the competences also for space applications like IR detector units for the SLSTR instrument on board of the Sentinel 3 satellite, the hyperspectral SWIR Imager for EnMAP or pushbroom detectors for high resolution Earth observation satellites. Meanwhile AIM delivered more than 25 Flight Models for several customers. The first European pulse-tube cooler ever operating on-board of a satellite is made by AIM. AIM homes the required infrared core capabilities such as design and manufacturing of focal plane assemblies, detector housing technologies, development and manufacturing of cryocoolers and also data processing for thermal IR cameras under one roof which enables high flexibility to react to customer needs and assures economical solutions. Cryogenically cooled Hg(1-x)CdxTe (MCT) quantum detectors are unequalled for applications requiring high imaging as well as high radiometric performance in the infrared spectral range. Compared with other technologies, they provide several advantages, such as the highest quantum efficiency, lower power dissipation compared to photoconductive devices and fast response times, hence outperforming micro-bolometer arrays. However, achieving an excellent MCT detector performance at long (LWIR) and very long (VLWIR) infrared wavelengths is challenging due to the exponential increase in the thermally generated photodiode dark current with increasing cut-off wavelength and / or operating temperature. Dark current is a critical design driver, especially for LWIR / VLWIR multi-spectral imagers with moderate signal levels or hyper-spectral Fourier spectrometers operating deep into the VLWIR spectral region. Consequently, low dark current (LDC) technologies are the

  9. How to Develop Creative Imagination? Assumptions, Aims and Effectiveness of Role Play Training in Creativity (RPTC)

    Science.gov (United States)

    Karwowski, Maciej; Soszynski, Marcin

    2008-01-01

    There are hundreds of ways to develop creativity among children, youths and adults. Developing new ideas and ways of teaching creativity should also incorporate youth's interests and hobbies. The article presents the main information about the new way of developing creative abilities, especially creative imagination, the Role Play Training in…

  10. Wind energy technology developments

    DEFF Research Database (Denmark)

    Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard

    2014-01-01

    turbine blades and towers are very large series-produced components, which costs and quality are strongly dependent on the manufacturing methods. The industrial wind energy sector is well developed in Denmark, and the competitive advantage of the Danish sector and the potential for job creation...

  11. Technological development in fisheries management

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Marchal, Paul; Gislason, Henrik

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism...... referred to as “technological creep.” We review how the introduction of new and more efficient electronic equipment, gear design, engines, deck equipment, and catch-handling procedures influences the capture efficiency (catchability) of commercial fishing vessels. On average, we estimate that catchability...... increases by 3.2% per year due to technological developments, an increase often ignored in fisheries management. The documentation and quantification of technological creep improves the basis for successfully integrating the effects of technological development (and catchability changes) in fisheries...

  12. Nigerian Journal of Technological Development

    African Journals Online (AJOL)

    The Nigerian Journal of Technological Development is now a quarterly publication of the Faculty of Engineering & Technology, University of Ilorin, Ilorin, Nigeria. It publishes original high-quality articles focusing on all aspects of Engineering and Applied Sciences in March, June, September and December. Manuscripts are ...

  13. High performance fuel technology development

    Energy Technology Data Exchange (ETDEWEB)

    Koon, Yang Hyun; Kim, Keon Sik; Park, Jeong Yong; Yang, Yong Sik; In, Wang Kee; Kim, Hyung Kyu [KAERI, Daejeon (Korea, Republic of)

    2012-01-15

    {omicron} Development of High Plasticity and Annular Pellet - Development of strong candidates of ultra high burn-up fuel pellets for a PCI remedy - Development of fabrication technology of annular fuel pellet {omicron} Development of High Performance Cladding Materials - Irradiation test of HANA claddings in Halden research reactor and the evaluation of the in-pile performance - Development of the final candidates for the next generation cladding materials. - Development of the manufacturing technology for the dual-cooled fuel cladding tubes. {omicron} Irradiated Fuel Performance Evaluation Technology Development - Development of performance analysis code system for the dual-cooled fuel - Development of fuel performance-proving technology {omicron} Feasibility Studies on Dual-Cooled Annular Fuel Core - Analysis on the property of a reactor core with dual-cooled fuel - Feasibility evaluation on the dual-cooled fuel core {omicron} Development of Design Technology for Dual-Cooled Fuel Structure - Definition of technical issues and invention of concept for dual-cooled fuel structure - Basic design and development of main structure components for dual- cooled fuel - Basic design of a dual-cooled fuel rod.

  14. Research and development of an aimed magnetic lead current density-magnetic field diagnostic. Final report

    International Nuclear Information System (INIS)

    1985-01-01

    A diagnostics survey was made to provide a clear definition of advanced diagnostic needs and the limitations of current approaches in addressing those needs. Special attention was given to the adequacy with which current diagnostics are interfaced to signal processing/data acquisition devices and systems. Critical evaluations of selected alternative diagnostic techniques for future R and D activities are presented. The conceptual basis of the Aimed Magnetic Lead Gradiometric system as a current density/magnetic field diagnostic is established

  15. Inaugural Technology Showcase Aims to Increase Industry Partnerships and Commercialization of Cancer-Related Inventions | FNLCR Staging

    Science.gov (United States)

    Biotechnology stakeholders from across the region will have the opportunity to learn about cutting-edge technologies addressing urgent and intractable problems in cancer research at the 2017 Technology Showcase, to be held at the Frederick National

  16. Multichip module technology development

    International Nuclear Information System (INIS)

    Kapustinsky, J.S.; Boissevain, J.G.; Muck, R.C.; Smith, G.D.; Wong-Swanson, B.G.; Ziock, H.J.

    1997-01-01

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). A Multichip Module (MCM) was designed and submitted for fabrication to the Lockheed Martin foundry using a licensed process called High Density Interconnect (HDI). The HDI process uses thin film techniques to create circuit interconnect patterns on multiple layers of dielectric film which are deposited directly on top of unpackaged electronic die. This results in an optimally small package that approaches the area of the bare die themselves. This project tested the capability of the Lockheed Martin foundry to produce, in an HDI process, a complex mixed-mode (analog and digital) circuit on a single MCM substrate

  17. Radioisotope Power Systems Technology Development

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of the RPS's technology portfolio is to advance performance of radioisotope power systems through new and novel innovations being developed and transitioned...

  18. Energy consumption and technological developments

    International Nuclear Information System (INIS)

    Okorokov, V.R.

    1990-02-01

    The paper determines an outline of the world energy prospects based on principal trends of the development of energy consumption analysed over the long past period. According to the author's conclusion the development of energy systems will be determined in the nearest future (30 - 40 years) by contemporary energy technologies based on the exploitation of traditional energy resources but in the far future technologies based on the exploitation of thermonuclear and solar energy will play the decisive role. (author)

  19. Antiviral Information Management System (AIMS): a prototype for operational innovation in drug development.

    Science.gov (United States)

    Jadhav, Pravin R; Neal, Lauren; Florian, Jeff; Chen, Ying; Naeger, Lisa; Robertson, Sarah; Soon, Guoxing; Birnkrant, Debra

    2010-09-01

    This article presents a prototype for an operational innovation in knowledge management (KM). These operational innovations are geared toward managing knowledge efficiently and accessing all available information by embracing advances in bioinformatics and allied fields. The specific components of the proposed KM system are (1) a database to archive hepatitis C virus (HCV) treatment data in a structured format and retrieve information in a query-capable manner and (2) an automated analysis tool to inform trial design elements for HCV drug development. The proposed framework is intended to benefit drug development by increasing efficiency of dose selection and improving the consistency of advice from US Food and Drug Administration (FDA). It is also hoped that the framework will encourage collaboration among FDA, industry, and academic scientists to guide the HCV drug development process using model-based quantitative analysis techniques.

  20. Decontamination Technology Development for Nuclear Research Facilities

    International Nuclear Information System (INIS)

    Oh, Won Zin; Jung, Chong Hun; Choi, Wang Kyu; Won, Hui Jun; Kim, Gye Nam

    2004-02-01

    Technology development of surface decontamination in the uranium conversion facility before decommissioning, technology development of component decontamination in the uranium conversion facility after decommissioning, uranium sludge treatment technology development, radioactive waste soil decontamination technology development at the aim of the temporary storage soil of KAERI, Optimum fixation methodology derivation on the soil and uranium waste, and safety assessment methodology development of self disposal of the soil and uranium waste after decontamination have been performed in this study. The unique decontamination technology applicable to the component of the nuclear facility at room temperature was developed. Low concentration chemical decontamination technology which is very powerful so as to decrease the radioactivity of specimen surface under the self disposal level was developed. The component decontamination technology applicable to the nuclear facility after decommissioning by neutral salt electro-polishing was also developed. The volume of the sludge waste could be decreased over 80% by the sludge waste separation method by water. The electrosorption method on selective removal of U(VI) to 1 ppm of unrestricted release level using the uranium-containing lagoon sludge waste was tested and identified. Soil decontamination process and equipment which can reduce the soil volume over 90% were developed. A pilot size of soil decontamination equipment which will be used to development of real scale soil decontamination equipment was designed, fabricated and demonstrated. Optimized fixation methodology on soil and uranium sludge was derived from tests and evaluation of the results. Safety scenario and safety evaluation model were development on soil and uranium sludge aiming at self disposal after decontamination

  1. An Organizational and Task Perspective Model Aimed at Enhancing Teachers' Professional Development and Occupational Expertise

    Science.gov (United States)

    Evers, Arnoud T.; Kreijns, Karel; Van der Heijden, Beatrice I. J. M.; Gerrichhauzen, John T. G.

    2011-01-01

    Currently, many countries, including the Netherlands, are "plagued" by severe, both quantitative and qualitative, teacher shortages that are even expected to increase in the years to come. Teachers' occupational development, therefore, has become an important issue on the research agenda of the respective countries. It is essential to…

  2. A Method for User Centering Systematic Product Development Aimed at Industrial Design Students

    Science.gov (United States)

    Coelho, Denis A.

    2010-01-01

    Instead of limiting the introduction and stimulus for new concept creation to lists of specifications, industrial design students seem to prefer to be encouraged by ideas in context. A new method that specifically tackles human activity to foster the creation of user centered concepts of new products was developed and is presented in this article.…

  3. Expressions of Liberal Justice? Examining the Aims of the UN's Sustainable Development Goals for Education

    Science.gov (United States)

    VanderDussen Toukan, Elena

    2017-01-01

    This paper analyzes the United Nations' Sustainable Development Goals (SDGs) for education, which sets benchmarks for member states to "ensure inclusive and equitable quality education and promote lifelong opportunities for all" by the year 2030. I examine ways in which the underlying philosophical rationale for the targets invokes a…

  4. Characteristic Features of Innovation Project Management Aimed at University Human Resource Development

    Science.gov (United States)

    Kalimullin, Aydar M.; Yungblud, Valery T.; Khodyreva, Elena A.

    2016-01-01

    The relevance of the studied issue is based on the need to develop theoretical approaches to project management at a higher educational institution taking into consideration the specifics of the subject area of the projects that ensure finding the "growth points" and addressing the long-term objectives of a university in the field of…

  5. Engineering research, development and technology

    International Nuclear Information System (INIS)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report

  6. The EM technology development strategy

    International Nuclear Information System (INIS)

    Frank, C.W.; Barainca, M.; Kubo, A.S.

    1992-01-01

    The Office of Technology Development (TD) supports research and development of technologies that will lower cost, reduce risk, improve safety, and accelerate cleanup of the Nuclear Weapons Complex and provide solutions to currently untractable environmental problems. The TD strategic plan outlines Applied Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) that will provide needed technology products to be used by Environmental Restoration and Waste Management operations (i.e., our customers). The TD strategic plan is derived from EM Goals, Objectives, and Strategy and is incorporated into DOE'S Five-Year Plan for Environmental Restoration and Waste Management. The TD strategic plan is developed based on integrating customer requirements, and is complemented by a top-down, bottom-up analysis of Site Specific Technology Needs and environmental problems. The execution of TD's strategic plan is implemented largely through Integrated Programs (IP) and Integrated Demonstrations (ID). IDs have proven to be a cost-effective method of managing technology development, testing and evaluation, and implementation of successful technology systems into the DOE Environmental Restoration and Waste Management Programs. The Savannah River ID for Volatile Organic Compounds (VOCs) in Saturated Soils resulted in a 51 percent cost savings over stand-alone demonstrations, saving over $8 million. The IPs and IDs are selected based on customer needs, technical complexity, and complex-wide regulatory and compliance agreements. New technology systems are selected for incorporation into an IP or ID from offerings of the DOE laboratories, industry, and the universities. A major TD initiative was announced in August 1991, with the release of a Program Research and Development Announcement (PRDA) requesting industry and universities to propose innovative new technologies to clean up the Weapons Complex. (author)

  7. Individualized teaching aimed at stimulating the development of talent and creativity in students

    Directory of Open Access Journals (Sweden)

    Arsić Zvezdan M.

    2013-01-01

    Full Text Available The time in which we live is characterized by rapid and conflicting changes as well as the development of all segments of social life. Access to the civilization of knowledge whose objectives, processes, and outcomes confirm that the human factor is becoming a leading cause of progress, requires redefinition of the relationship between society and schools. In the process of the cultural development, there is a need for talented and creative members of society who are going to be prepared for the leading roles through the educational system. However, in the teaching process, the gifted and creative students very often face a number of difficulties and problems that interfere with their optimal development. They are primarily victims of ignorance and disregard of individual differences among children of the same age, even children with the same IQ. For this reason, the main focus of this paper is on creating the conditions that can contribute to overcoming the problems that gifted and creative students encounter in the present circumstances of the organization and application of the process. Individualized instruction is a reasonable basis for success in this area, since it allows the contents, organization, methods and means of teaching, and learning adapt to individual differences, needs and abilities of students.

  8. Evaluation of a faculty development program aimed at increasing residents' active learning in lectures.

    Science.gov (United States)

    Desselle, Bonnie C; English, Robin; Hescock, George; Hauser, Andrea; Roy, Melissa; Yang, Tong; Chauvin, Sheila W

    2012-12-01

    Active engagement in the learning process is important to enhance learners' knowledge acquisition and retention and the development of their thinking skills. This study evaluated whether a 1-hour faculty development workshop increased the use of active teaching strategies and enhanced residents' active learning and thinking. Faculty teaching in a pediatrics residency participated in a 1-hour workshop (intervention) approximately 1 month before a scheduled lecture. Participants' responses to a preworkshop/postworkshop questionnaire targeted self-efficacy (confidence) for facilitating active learning and thinking and providing feedback about workshop quality. Trained observers assessed each lecture (3-month baseline phase and 3-month intervention phase) using an 8-item scale for use of active learning strategies and a 7-item scale for residents' engagement in active learning. Observers also assessed lecturer-resident interactions and the extent to which residents were asked to justify their answers. Responses to the workshop questionnaire (n  =  32/34; 94%) demonstrated effectiveness and increased confidence. Faculty in the intervention phase demonstrated increased use of interactive teaching strategies for 6 items, with 5 reaching statistical significance (P ≤ .01). Residents' active learning behaviors in lectures were higher in the intervention arm for all 7 items, with 5 reaching statistical significance. Faculty in the intervention group demonstrated increased use of higher-order questioning (P  =  .02) and solicited justifications for answers (P  =  .01). A 1-hour faculty development program increased faculty use of active learning strategies and residents' engagement in active learning during resident core curriculum lectures.

  9. The development of information technologies

    Directory of Open Access Journals (Sweden)

    Kostúr Karol

    2002-12-01

    Full Text Available The contribution analyses the tasks information technologies in industry. At present time is the problem of connecting mutual variously levels of management. Therefore, first priority is an integration of information technologies. The information technologies for enterprise management are analysed. The product SAP R/3 appears as suitable for top management. The SAP R/3 Enterprise has a new technology so call web-server. This server enables the integration with e-business. The development my SAP is based on application of Business information warehouse (BW and Strategic enterprise management (SEM. The cheaper products (SPIN + EVIS are characterized too. Whitness Miner is very interesting system. The contribution this technology is programming realization of method KDD – knowledge discovery in databases.

  10. Neuroenhancement and the Developing Brain: Commentary on the AIMS Neuroscience Special Issue on “Neuroenhancers”

    Directory of Open Access Journals (Sweden)

    Sarah Ly

    2015-10-01

    Full Text Available The use of pharmaceutical neuroenhancers to improve cognitive function poses unique neurobiological concerns as stimulants are being widely prescribed to adolescents and young adults with increasing prevalence. In the following commentary on the papers by Hoffman et al [1] and Cheung and Pierre [2] in the special issue on Neuroenhancers, we discuss the need to consider the effects of stimulant use in healthy adolescents. We review some of the data that has emerged on the neurobiological and behavioral effects of adolescent neuroenhancement, and conclude that special consideration should be taken to characterize the consequences of neuroenhancement use in the developing brain. Studies focused specifically on adolescent vulnerabilities to neuroenhancement are necessary because the brain undergoes dynamics changes that are unique to this period of development, which differentiates it from the healthy adult response to neuroenhancer exposure. Moving forward, scientists and physicians should take careful consideration to examine the long-term neurological consequences of neuroenhancers so that the therapeutic benefits that might be gained from neuroenhancement are not shadowed by negative consequences to public health in the future.

  11. Theorizing about technological development of manufacturing companies

    DEFF Research Database (Denmark)

    Matthiesen, Rikke Vestergaard

    2012-01-01

    The aim of the paper is to apply metatriangulation and theory building to strengthen our theorizing on technological development of manufacturing firms. AMT literature is reviewed and by means of bracketing, the paper identifies a set of problematic assumptions embedded within traditional AMT res...

  12. Comaparison of Web Developement Technologies

    OpenAIRE

    Ramesh Nagilla, Ramesh

    2012-01-01

    Web applications play an important role for many business purpose activities in the modernworld. It has become a platform for the companies to fulfil the needs of their business. In thissituation, Web technologies that are useful in developing these kinds of applications become animportant aspect. Many Web technologies like Hypertext Preprocessor (PHP), Active ServerPages (ASP.NET), Cold Fusion Markup Language (CFML), Java, Python, and Ruby on Rails areavailable in the market. All these techn...

  13. European innovation and technology development

    International Nuclear Information System (INIS)

    Johnson, R.W.

    1991-01-01

    The promotion of technological innovation by European national governments and the EC in pursuit of both increased recovery and the anchoring of technology in supply, manufacturing and service sector companies has been a feature of the strategic involvement by European states in exploration and production research and development. This paper summaries past trends in this activity and reviews the targets for future industry innovation which will enable European (primarily the North Sea) production to be sustained for a further generation

  14. Integrating Product and Technology Development

    DEFF Research Database (Denmark)

    Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2016-01-01

    .g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

  15. Space technology developments in Malaysia:

    Science.gov (United States)

    Sabirin, A.

    The venture of space is, by nature, a costly one. However, exploring space is not just an activity reserved for international superpowers. Smaller and emerging space nations, some with burgeoning space programs of their own, can play a role in space technology development and interplanetary exploration, sometimes simply by just being there. Over the past four decades, the range of services delivered by space technologies in Malaysia has grown enormously. For many business and public services, space based technologies have become the primary means of delivery of such services. Space technology development in Malaysia started with Malaysia's first microsatellite, TiungSAT-1. TiungSAT-1 has been successfully launched from the Baikonur Cosmodrome, Kazakhstan on the 26th of September 2000 on a Russian-Ukrainian Dnepr rocket. There have been wide imaging applications and information extraction using data from TiungSAT-1. Various techniques have been applied to the data for different applications in environmental assessment and monitoring as well as resource management. As a step forward, Malaysia has also initiated another space technology programme, RAZAKSAT. RAZAKSAT is a 180kg class satellite designed to provide 2.5meter ground sampling distance resolution imagery on a near equatorial orbit. Its mission objective is to demonstrate the capability of a medium high resolution remote sensing camera using a cost effective small satellite platform and a multi-channel linear push-broom electro-optical instrument. Realizing the immense benefits of space technology and its significant role in promoting sustainable development, Malaysia is committed to the continuous development and advancement of space technology within the scope of peaceful use of outer space and boosting its national economic growth through space related activities.

  16. Advanced Mirror & Modelling Technology Development

    Science.gov (United States)

    Effinger, Michael; Stahl, H. Philip; Abplanalp, Laura; Maffett, Steven; Egerman, Robert; Eng, Ron; Arnold, William; Mosier, Gary; Blaurock, Carl

    2014-01-01

    The 2020 Decadal technology survey is starting in 2018. Technology on the shelf at that time will help guide selection to future low risk and low cost missions. The Advanced Mirror Technology Development (AMTD) team has identified development priorities based on science goals and engineering requirements for Ultraviolet Optical near-Infrared (UVOIR) missions in order to contribute to the selection process. One key development identified was lightweight mirror fabrication and testing. A monolithic, stacked, deep core mirror was fused and replicated twice to achieve the desired radius of curvature. It was subsequently successfully polished and tested. A recently awarded second phase to the AMTD project will develop larger mirrors to demonstrate the lateral scaling of the deep core mirror technology. Another key development was rapid modeling for the mirror. One model focused on generating optical and structural model results in minutes instead of months. Many variables could be accounted for regarding the core, face plate and back structure details. A portion of a spacecraft model was also developed. The spacecraft model incorporated direct integration to transform optical path difference to Point Spread Function (PSF) and between PSF to modulation transfer function. The second phase to the project will take the results of the rapid mirror modeler and integrate them into the rapid spacecraft modeler.

  17. Accelerating System Development for the Food Chain: A Portfolio of over 30 Projects, Aiming at Impact and Growth

    Directory of Open Access Journals (Sweden)

    Harald Sundmaeker

    2016-08-01

    The FIWARE initiative is accelerating startups and supporting SME type technology developers that are realising solutions for real world business cases, which are serving as reference customers and test cases to assure an end-user acceptance and valid business models. This paper discusses the main food chain related topics and innovation potentials that are addressed as well as outlines the related methodological and technological approaches that are used to facilitate the realisation of impact and growth for commercial exploitation.

  18. Inaugural Technology Transfer Showcase Aims to Increase Industry Partnerships and Commercialization of Cancer-Related Inventions | Poster

    Science.gov (United States)

    Science and business professionals from across the region will have an opportunity to learn about—and perhaps even commercialize—cutting-edge technologies being used to address some of the most urgent and intractable problems in the biomedical sciences at an upcoming event held at the Frederick National Laboratory for Cancer Research.

  19. Development of clean environment conservation technology by radiation

    International Nuclear Information System (INIS)

    Lee, Myunjoo; Kim, Tak Hyun; Jung, In Ha

    2012-04-01

    This report is aim to develop the technology for environmental conservation by radiation. It is consisted of two research parts. One is development of wastewater disinfection technology by radiation and the other is development of livestock waste treatment technology by radiation. For the development of wastewater disinfection technology disinfect ion process, technology for treatment of toxic organic chemicals and assessment of ecological toxicity, technology for treatment of endocrine disrupting chemicals and assessment of genetic safety were developed. For the development of livestock waste treatment technology, process for simultaneous removal of nutrients, technology for disinfection and quality enhancement of livestock waste compost, technology for reduction of composting periods, monitoring of toxic organic compounds, pretreatment technology for organic toxic chemicals and enhancement of biological treatment efficiencies were developed. Based on basic research, advanced livestock wastewater treatment process using radiation was established

  20. Technological Development and Fisheries Management

    NARCIS (Netherlands)

    Eigaard, O.R.; Marchal, P.; Gislason, H.; Rijnsdorp, A.D.

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism

  1. Technology and Motor Ability Development

    Science.gov (United States)

    Wang, Lin; Lang, Yong; Luo, Zhongmin

    2014-01-01

    As a new member joining the technology family, active video games have been developed to promote physical exercise. This working-in-progress paper shares an ongoing project on examining the basic motor abilities that are enhanced through participating in commercially available active video games. [For the full proceedings see ED557181.

  2. Development of radioisotope tracer technology

    International Nuclear Information System (INIS)

    Jin, Joon Ha; Lee, Myun Joo; Jung, Sung Hee; Park, Soon Chul; Lim, Dong Soon; Kim, Jae Ho; Lee, Jae Choon; Lee, Doo Sung; Cho, Yong Suk; Shin, Sung Kuan

    2000-04-01

    The purpose of this study is to develop the radioisotope tracer technology, which can be used in solving industrial and environmental problems and to build a strong tracer group to support the local industries. In relation to the tracer technology in 1999, experiments to estimate the efficiencies of a sludge digester of a waste water treatment plant and a submerged biological reactor of a dye industry were conducted. As a result, the tracer technology for optimization of facilities related to wastewater treatment has been developed and is believed to contribute to improve their operation efficiency. The quantification of the experimental result was attempted to improve the confidence of tracer technology by ECRIN program which basically uses the MCNP simulation principle. Using thin layer activation technique, wear of tappet shim was estimated. Thin layer surface of a tappet shim was irradiated by proton beam and the correlation between the measured activity loss and the amount of wear was established. The equipment was developed to adjust the energy of proton which collides with the surface of tappet. The tracer project team has participated into the tracer test for estimating the efficiency of RFCC system in SK cooperation. From the experiment the tracer team has obtained the primary elements to be considered for judging the efficiency of RFCC unit. By developing the tracer techniques to test huge industrial units like RFCC, the tracer team will be able to support the local industries that require technical services to solve any urgent trouble. (author)

  3. competitive technologies for sustainable development

    International Nuclear Information System (INIS)

    Chriqui, Vincent; Bergougnoux, Jean; Hossie, Gaelle; Beeker, Etienne; Buba, Johanne; Delanoe, Julien; Ducos, Geraldine; Hilt, Etienne; Rigard-Cerison, Aude; Teillant, Aude; Auverlot, Dominique; Martinez, Elise; Dambrine, Fabrice; Roure, Francoise

    2012-08-01

    By letter dated 27 April 2011, the Director General of the Centre for Strategic Analysis, Vincent Chriqui, confided to Jean Bergougnoux, honorary president of the SNCF, Honorary General Director of EDF, the task of animating a reflection Prospective Technological Studies of the sectors of energy, transport and construction. This synthesis report, prepared with the assistance of rapporteurs Centre for Strategic Analysis, attempts to summarize and put into perspective all the work which show these specific reports. Admittedly some very complex issues still need supplements. It may therefore be useful to extend this work in a number of areas. Beyond its role in the competitiveness of a country, technological innovation is essential to provide appropriate responses to the challenges of our commitment to sustainable development in terms of economic growth, preservation of the environmental and social progress. Mission for Prospective Technological conducted by the Centre for Strategic Analysis has sought to clarify this dual problem by proposing a long-term vision for the energy, transport and construction. For each technology studied, it has attempted to assess both the possible contribution to sustainable development and the competitive potential of our country on the international scene. His work, chaired by Jean Bergougnoux have reviewed the technological advances that may occur in the coming decades in the sectors concerned. They examined the conditions for integration of these advances in systems and subsystems existing (or create) and the conditions of a mature technical, economic but also social. Wherever possible, two time horizons were identified: a medium-term horizon, 2030, for which we have a fairly clear vision of future developments and long-term horizon, 2050, which allows to consider jumps Scientists are still uncertain. Finally, the mission is interested in four transverse technologies involved consistently in the three study areas, which are likely to

  4. PRINTING TECHNIQUES: RECENT DEVELOPMENTS IN PHARMACEUTICAL TECHNOLOGY.

    Science.gov (United States)

    Jamroz, Witold; Kurek, Mateusz; Lyszczarz, Ewelina; Brniak, Witold; Jachowicz, Renata

    2017-05-01

    In the last few years there has been a huge progress in a development of printing techniques and their application in pharmaceutical sciences and particularly in the pharmaceutical technology. The variety of printing methods makes it necessary to systemize them, explain the principles of operation, and specify the possibilities of their use in pharmaceutical technology. This paper aims to review the printing techniques used in a drug development process. The growing interest in 2D and 3D printing methods results in continuously increasing number of scientific papers. Introduction of the first printed drug Spritam@ to the market seems to be a milestone of the 3D printing development. Thus, a particular aim of this review is to show the latest achievements of the researchers in the field of the printing medicines.

  5. Technology development life cycle processes.

    Energy Technology Data Exchange (ETDEWEB)

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  6. AFCI Safeguards Enhancement Study: Technology Development Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

    2008-12-31

    The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

  7. Mount Sinai leverages smartphone technology, aiming to boost care, coordination of ED patients while also trimming costs.

    Science.gov (United States)

    2015-05-01

    Mount Sinai Hospital in New York, NY, is using smartphone technology to enhance follow-up calls to senior patients who have visited the ED, and to help provide acute-level care to select patients in their own homes. Investigators are hoping to show that these approaches can improve care and coordination while trimming costs, and they expect that patients will approve of these new approaches as well. While senior patients are still in the ED, nurse coordinators will work with them to load a HIPAA-compliant application to their smartphones so they can conduct face-to-face follow-up calls that meet HIPAA standards. Nurses say the face-to-face communications enhance their ability to assess how patients are doing following their ED visit. The hospital is also testing a program that enables some ED patients who meet inpatient criteria to receive this care in the home setting through the use of a mobile acute care team (MACT). In the case of emergencies, the MACT team relies on community paramedics who will visit the patients' homes and provide care under the direction of MACT physicians who are linked in to these visits via smartphone technology.

  8. Efficiency of environmental policies aiming at fostering the adoption of new technologies: the case of renewable energies

    International Nuclear Information System (INIS)

    Lamy, M.L.

    2004-10-01

    This thesis aims to study the efficiency of promotion policies of renewable energies in electric power production taking into account the environment economy problems. The techniques at a commercial scale are particularly discussed. The first part deals with the incitement to technical progress in favor of the environmental protection. The second part proposes an empirical analysis based on the efficiency economical parameters and the last part analyses theoretically the efficiency of promotion tools of renewable energies. (A.L.B.)

  9. Advanced Modular Inverter Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Adam Szczepanek

    2006-02-04

    Electric and hybrid-electric vehicle systems require an inverter to convert the direct current (DC) output of the energy generation/storage system (engine, fuel cells, or batteries) to the alternating current (AC) that vehicle propulsion motors use. Vehicle support systems, such as lights and air conditioning, also use the inverter AC output. Distributed energy systems require an inverter to provide the high quality AC output that energy system customers demand. Today's inverters are expensive due to the cost of the power electronics components, and system designers must also tailor the inverter for individual applications. Thus, the benefits of mass production are not available, resulting in high initial procurement costs as well as high inverter maintenance and repair costs. Electricore, Inc. (www.electricore.org) a public good 501 (c) (3) not-for-profit advanced technology development consortium assembled a highly qualified team consisting of AeroVironment Inc. (www.aerovironment.com) and Delphi Automotive Systems LLC (Delphi), (www.delphi.com), as equal tiered technical leads, to develop an advanced, modular construction, inverter packaging technology that will offer a 30% cost reduction over conventional designs adding to the development of energy conversion technologies for crosscutting applications in the building, industry, transportation, and utility sectors. The proposed inverter allows for a reduction of weight and size of power electronics in the above-mentioned sectors and is scalable over the range of 15 to 500kW. The main objective of this program was to optimize existing AeroVironment inverter technology to improve power density, reliability and producibility as well as develop new topology to reduce line filter size. The newly developed inverter design will be used in automotive and distribution generation applications. In the first part of this program the high-density power stages were redesigned, optimized and fabricated. One of the main

  10. Development of Industrial Process Diagnosis and Measurement Technology

    International Nuclear Information System (INIS)

    Jung, Sung Hee; Kim, Jong Bum; Moon, Jin Ho

    2010-04-01

    Section 1. Industrial Gamma CT Technology for Process Diagnosis: The project is aimed to develop industrial process gamma tomography system for investigation on structural and physical malfunctioning and process media distribution by means of sealed gamma source and radioactive materials. Section 2. Development of RI Hydraulic Detection Technology for Industrial Application: The objectives in this study are to develop the evaluation technology of the hydrological characteristics and the hydraulic detection technology using radioisotope, and to analyze the hydrodynamics and pollutant transport in water environment like surface and subsurface. Section 3. Development of RT-PAT System for Powder Process Diagnosis: The objective of this project is the development of a new radiation technology to improve the accuracy of the determination of moisture content in a powder sample by using radiation source through the so-called RT-PAT (Radiation Technology-Process Analytical Technology), which is a new concept of converging technology between the radiation technology and the process analytical technology

  11. Development of industrial process diagnosis and measurement technology

    International Nuclear Information System (INIS)

    Jung, Sunghee; Kim, Jongbum; Moon, Jinho; Suh, Kyungsuk; Kim, Jongyun

    2012-04-01

    Section1. Industrial Gamma CT Technology for Process Diagnosis The project is aimed to develop industrial process gamma tomography system for investigation on structural and physical malfunctioning and process media distribution by means of sealed gamma source and radioactive materials. Section2. Development of RI Hydraulic Detection Technology for Industrial Application The objectives in this study are to develop the evaluation technology of the hydrological characteristics and the hydraulic detection technology using radioisotope, and to analyze the hydrodynamics and pollutant transport in water environment like surface and subsurface. Section3. Development of RT-PAT System for Powder Process Diagnosis The objective of this project is the development of a new radiation technology to improve the accuracy of the determination of moisture content in a powder sample by using radiation source through the so-called RT-PAT (Radiation Technology-Process Analytical Technology), which is a new concept of converging technology between the radiation technology and the process analytical technology

  12. Information and Communication Technologies in the Care of the Elderly: Systematic Review of Applications Aimed at Patients With Dementia and Caregivers

    Science.gov (United States)

    2016-01-01

    Background The interest in applying information and communications technology (ICT) in older adult health care is frequently promoted by the increasing and unsustainable costs of health care services. In turn, the unprecedented growth of the elderly population around the globe has urged institutions, companies, industries, and governments to respond to older adults’ medical needs. Objective The aim of this review is to systematically identify the opportunities that ICT offers to health services, specifically for patients with dementia and their families. Methods A systematic review of the literature about ICT applications that have been developed to assist patients with Alzheimer’s disease (AD) and their primary caregivers was conducted. The bibliographic search included works published between January 2005 and July 2015 in the databases Springer Link, Scopus, and Google Scholar. Of the published papers, 902 were obtained in the initial search, of which 214 were potentially relevant. Included studies fulfilled the following inclusion criteria: (1) studies carried out between the years of 2005 and 2015, (2) studies were published in English or Spanish, (3) studies with titles containing the keywords, (4) studies with abstracts containing information on ICT applications and AD, and (5) studies published in indexed journals, proceedings, and book chapters. Results A total of 26 studies satisfied the inclusion criteria for the current review. Among them, 16 were aimed at the patient with AD and 10 at the primary caregivers and/or family members. The studies targeted applications that included assistive technology (44%, 7/16), telecare (37%, 6/16), and telemedicine (31%, 5/16). The information systems (56%, 9/16) and Internet (44%, 7/16) were the most commonly used enabling technologies for the studies. Finally, areas of attention more covered by the studies were care (56%, 9/16), treatment (56%, 9/16), and management (50%, 8/16). Furthermore, it was found that 20

  13. The development strategy of financial and innovative technologies

    OpenAIRE

    R.V. Lavrov

    2013-01-01

    The aim of the article. The aim of the article is to define and to estimate the forming of expediency of the development strategy of financial and innovative technologies in the context of modern economic space realities.The results of the analysis. The growing importance of the financial sector in the contemporary economic space, as well as rapid changes in it, generates a need for financial innovative technologies. Development strategy of financial and innovative technologies is always asso...

  14. EAGLE: relay mirror technology development

    Science.gov (United States)

    Hartman, Mary; Restaino, Sergio R.; Baker, Jeffrey T.; Payne, Don M.; Bukley, Jerry W.

    2002-06-01

    EAGLE (Evolutionary Air & Space Global Laser Engagement) is the proposed high power weapon system with a high power laser source, a relay mirror constellation, and the necessary ground and communications links. The relay mirror itself will be a satellite composed of two optically-coupled telescopes/mirrors used to redirect laser energy from ground, air, or space based laser sources to distant points on the earth or space. The receiver telescope captures the incoming energy, relays it through an optical system that cleans up the beam, then a separate transmitter telescope/mirror redirects the laser energy at the desired target. Not only is it a key component in extending the range of DoD's current laser weapon systems, it also enables ancillary missions. Furthermore, if the vacuum of space is utilized, then the atmospheric effects on the laser beam propagation will be greatly attenuated. Finally, several critical technologies are being developed to make the EAGLE/Relay Mirror concept a reality, and the Relay Mirror Technology Development Program was set up to address them. This paper will discuss each critical technology, the current state of the work, and the future implications of this program.

  15. How does technological regime affect performance of technology development projects?

    NARCIS (Netherlands)

    Song, Michael; Hooshangi, Soheil; Zhao, Y. Lisa; Halman, Johannes I.M.

    2014-01-01

    In this study, we examine how technological regime affects the performance of technology development projects (i.e., project quality, sales, and profit). Technological regime is defined as the set of attributes of a technological environment where the innovative activities of firms take place.

  16. Development of DUPIC safeguards technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. D.; Ko, W. I.; Song, D. Y. [and others

    2000-03-01

    During the first phase of R and D program conducted from 1997 to 1999, nuclear material safeguards studies system were performed on the technology development of DUPIC safeguards system such as nuclear material measurement in bulk form and product form, DUPIC fuel reactivity measurement, near-real-time accountancy, and containment and surveillance system for effective and efficient implementation of domestic and international safeguards obligation. For the nuclear material measurement system, the performance test was finished and received IAEA approval, and now is being used in DUPIC Fuel Fabrication Facility(DFDF) for nuclear material accounting and control. Other systems being developed in this study were already installed in DFDF and being under performance test. Those systems developed in this study will make a contribution not only to the effective implementation of DUPIC safeguards, but also to enhance the international confidence build-up in peaceful use of spent fuel material. (author)

  17. Empowering employees with chronic diseases; development of an intervention aimed at job retention and design of a randomised controlled trial

    NARCIS (Netherlands)

    Varekamp, Inge; de Vries, Gabe; Heutink, Annelies; van Dijk, Frank J. H.

    2008-01-01

    ABSTRACT: BACKGROUND: Persons with a chronic disease are less often employed than healthy persons. If employed, many of them experience problems at work. Therefore, we developed a training programme aimed at job retention. The objective of this paper is to describe this intervention and to present

  18. Assessing medical technologies in development; a new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, Gerhard

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. - Method: We introduce a method, based on

  19. Assessing medical technologies in development - A new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, MJM; van Rossum, W; Verkerke, GJ; Rakhorst, G

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. Method: We introduce a method, based on

  20. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  1. Development of nuclear analytical technology

    International Nuclear Information System (INIS)

    Jee, Kwang Yong; Kim, W. H.; Park, Yeong J.; Park, Yong J.; Sohn, S. C.; Song, B. C.; Jeon, Y. S.; Pyo, H. Y.; Ha, Y. K.

    2004-04-01

    The objectives of this study are to develop the technology for the determination of isotopic ratios of nuclear particles detected from swipe samples and to develop the NIPS system. The R and D contents and results of this study are firstly the production of nuclear micro particle(1 ∼ 20 μm) and standardization, the examination of variation in fission track characteristic according to nuclear particle size and enrichment( 235 U: 1-50%), the construction of database and the application of this technique to swipe samples. If this technique is verified its superiority by various field tests and inter-laboratory comparison program with other institutes in developed countries, it can be possible to join NWAL supervised under IAEA and to export our technology abroad. Secondly, characteristics of alpha track by boron (n, α) nuclear reaction were studied to measure both total boron concentration and 10B enrichment. The correlation of number of alpha tracks and various 10B concentration was studied to evaluate the reliability of this method. Especially, cadmium shielding technique was introduced to reduce the background of alpha tracks by covering the solid track detector and the multi-dot detector plate was developed to increase the reproducibility of measurement by making boron solution dried evenly in the plate. The results of the alpha track method were found to be well agreed with those of mass spectroscopy within less than 10 % deviation. Finally, the NIPS system using 252 Cf neutron source was developed and prompt gamma spectrum and its background were obtained. Monte Carlo method using MCNP-4B code was utilized for the interpretation of neutron and gamma-ray shielding condition as well as the moderation of a fast neutron. Gamma-gamma coincidence was introduced to reduce the prompt gamma background. The counting efficiency of the HPGe detector was calibrated in the energy range from 50 keV to 10 MeV using radio isotope standards and prompt gamma rays of Cl for the

  2. Dry rod consolidation technology development

    International Nuclear Information System (INIS)

    Rasmussen, T.L.; Schoonen, D.H.; Feldman, E.M.; Fisher, M.W.

    1987-01-01

    The Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is funding a program to consolidate commercial spent fuel for testing in dry storage casks and to develop technology that will be fed into other OCRWM programs, e.g., Prototypical Consolidation Demonstration Program (PCDP). The program is being conducted at the Idaho National Engineering Laboratory (INEL) by the INEL Operating Contractor EG and G Idaho, Inc. Hardware and software have been designed and fabricated for installation in a hot cell adjacent to the Test Area North (TAN) Hot Shop Facility. This equipment is used to perform dry consolidation of commercial spent fuel from the Virginia Power (VP) Cooperative Agreement Spent Fuel Storage Cask (SFSC) Demonstration Program and assemblies that had previously been stored at the Engine Maintenance and Disassembly (EMAD) facility in Nevada. Consolidation is accomplished by individual, horizontal rod pulling. A computerized semiautomatic control system with operator involvement is utilized to conduct consolidation operations. During consolidation operations, data is taken to characterize this technology. Still photo, video tape, and other documentation will be generated to make developed information available to interested parties. Cold checkout of the hardware and software was completed in September of 1986. Following installation in the hot cell, consolidation operations begins in May 1987. Resulting consolidated fuel will be utilized in the VP Cooperative Agreement SFSC Program

  3. Dry rod consolidation technology development

    International Nuclear Information System (INIS)

    Rasmussen, T.L.; Schoonen, D.H.; Fisher, M.W.

    1986-01-01

    The Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is funding a Program to consolidate commercial spent fuel for testing in dry storage casks and to develop technology that will be fed into other OCRWM Programs, e.g., Prototypical Consolidation Demonstration Program. The Program is being conducted at the Idaho National Engineering Laboratory (INEL) by the Operating Contractor, EGandG Idaho, Inc. Hardware and software have been designed and fabricated for installation in a hot cell adjacent to the Test Area North (TAN) Hot Shop Facility. This equipment will be used to perform dry consolidation of commercial spent fuel from the Virginia Power (VP) Cooperative Agreement Spent Fuel Storage Cask (SPSC) Demonstration Program and assemblies that had previously been stored at the Engine Maintenance and Disassembly (EMAD) facility in Nevada. Consolidation will be accomplished by individual, horizontal rod pulling. A computerized semi-automatic control system with operator involvement will be utilized to conduct consolidation operations. Special features have been incorporated in the design to allow crud collection and measurement of rod pulling forces. During consolidation operations, data will be taken to characterize this technology. Still photo, video tape, and other documentation will be generated to make developed information available to interested parties. Cold checkout of the hardware and software will complete in September of 1986. Following installation in the hot cell, consolidation operations will begin in January 1987. Resulting consolidated fuel will be utilized in the VP Cooperative Agreement SFSC Program

  4. Information and Communication Technologies in the Care of the Elderly: Systematic Review of Applications Aimed at Patients With Dementia and Caregivers.

    Science.gov (United States)

    Martínez-Alcalá, Claudia I; Pliego-Pastrana, Patricia; Rosales-Lagarde, Alejandra; Lopez-Noguerola, J S; Molina-Trinidad, Eva M

    2016-05-02

    The interest in applying information and communications technology (ICT) in older adult health care is frequently promoted by the increasing and unsustainable costs of health care services. In turn, the unprecedented growth of the elderly population around the globe has urged institutions, companies, industries, and governments to respond to older adults' medical needs. The aim of this review is to systematically identify the opportunities that ICT offers to health services, specifically for patients with dementia and their families. A systematic review of the literature about ICT applications that have been developed to assist patients with Alzheimer's disease (AD) and their primary caregivers was conducted. The bibliographic search included works published between January 2005 and July 2015 in the databases Springer Link, Scopus, and Google Scholar. Of the published papers, 902 were obtained in the initial search, of which 214 were potentially relevant. Included studies fulfilled the following inclusion criteria: (1) studies carried out between the years of 2005 and 2015, (2) studies were published in English or Spanish, (3) studies with titles containing the keywords, (4) studies with abstracts containing information on ICT applications and AD, and (5) studies published in indexed journals, proceedings, and book chapters. A total of 26 studies satisfied the inclusion criteria for the current review. Among them, 16 were aimed at the patient with AD and 10 at the primary caregivers and/or family members. The studies targeted applications that included assistive technology (44%, 7/16), telecare (37%, 6/16), and telemedicine (31%, 5/16). The information systems (56%, 9/16) and Internet (44%, 7/16) were the most commonly used enabling technologies for the studies. Finally, areas of attention more covered by the studies were care (56%, 9/16), treatment (56%, 9/16), and management (50%, 8/16). Furthermore, it was found that 20 studies (77%, 8/26) evaluated their ICT

  5. Information Communication Technology Planning in Developing Countries

    Science.gov (United States)

    Malapile, Sandy; Keengwe, Jared

    2014-01-01

    This article explores major issues related to Information Communication Technology (ICT) in education and technology planning. Using the diffusion of innovation theory, the authors examine technology planning opportunities and challenges in Developing countries (DCs), technology planning trends in schools, and existing technology planning models…

  6. Technology platforms: opportunities and development perspectives

    Science.gov (United States)

    Belyakov, G. P.; Avramchikova, N. T.; Belyakova, G. Y.; Chuvashova, M. N.

    2016-11-01

    The term “technology platform” is used to define thematic scopes in terms of which technological priorities are formed concerning state, business, science and education cooperation that are aimed to solve the problem of state technological independence. The authors have examined the implementation of this tool so that to concentrate essential resources in priority-driven vectors of science and technological advancement of a guiding cluster of innovative technologies in the field of space applications.

  7. Inspection technologies -Development of national safeguards technology-

    International Nuclear Information System (INIS)

    Hong, J. S.; Kim, B. K.; Kwack, E. H.

    1996-12-01

    17 facility regulations prepared by nuclear facilities according to the Ministerial Notices were evaluated. Safeguards inspection activities under Safeguards are described. Safeguards inspection equipments and operation manuals to be used for national inspection are also described. Safeguards report are produced and submitted to MOST by using the computerized nuclear material accounting system at state level. National inspection support system are developed to produce the on-site information for domestic inspection. Planning and establishment of policy for nuclear control of nuclear materials, international cooperation for nuclear control, CTBT, strengthening of international safeguards system, and the supply of PWRs to North Korea are also described. (author). 43 tabs., 39 figs

  8. Advanced baffle materials technology development

    Science.gov (United States)

    Johnson, E. A.; Vonbenken, C. J.; Halverson, W. D.; Evans, R. D.; Wollam, J. S.

    1991-10-01

    Optical sensors for strategic defense will require optical baffles to achieve adequate off-axis stray light rejection and pointing accuracy. Baffle materials must maintain their optical performance after exposure to both operational and threat environments. In addition, baffle materials must not introduce contamination which would compromise the system signal-to-noise performance or impair system mission readiness. Critical examination of failure mechanisms in current baffle materials are quite fragile and contribute to system contamination problems. Spire has developed technology to texture the substrate directly, thereby, removing minute, fragile interfaces subject to mechanical failure. This program has demonstrated that ion beam texturing produces extremely dark surfaces which are immune to damage from ordinary handling. This technology allows control of surface texture feature size and hence the optical wavelength at which the surface absorbs. The USAMTL/Spire program has produced dramatic improvements in the reflectance of ion beam textured aluminum without compromising mechanical hardness. In simulated launch vibration tests, this material produced no detectable contamination on adjacent catcher plates.

  9. Developing a dashboard to help measure and achieve the triple aim: a population-based cohort study.

    Science.gov (United States)

    Seow, Hsien-Yeang; Sibley, Lyn M

    2014-08-30

    sicker ACGs. It can help to achieve the third aim, improved care experience, when ACG utilization predictions are reported to providers to proactively develop care plans. The dashboard, developed via case-mix methods, measures 2 of the Triple Aim goals and can help health system planners better manage their health delivery systems.

  10. Technology transfer and international development: Materials and manufacturing technology

    Science.gov (United States)

    1982-01-01

    Policy oriented studies on technological development in several relatively advanced developing countries were conducted. Priority sectors defined in terms of technological sophistication, capital intensity, value added, and export potential were studied in Brazil, Venezuela, Israel, and Korea. The development of technological policy alternatives for the sponsoring country is assessed. Much emphasis is placed on understanding the dynamics of the sectors through structured interviews with a large sample of firms in the leading manufacturing and materials processing sectors.

  11. Technology in Sustainable Development Context

    Science.gov (United States)

    Uno, Kimio

    The economic and demographic growth in Asia has put increased importance to this part of the world whose contribution to the global community is vital in meeting global challenges. International cooperation in engineering education assumes a pivotal role in providing access to the frontiers of scientific and technological knowledge to the growing youths in the region. The thrust for advancement has been provided by the logic coming from the academic world itself, whereas expectations are high that the engineering education responds to challenges that are coming from outside the universities, such as environmental management, disaster management, and provision of common knowledge platform across disciplinary lines. Some cases are introduced in curriculum development that incorporates fieldwork and laboratory work intended to enhance the ability to cooperate. The new mode is discussed with focus on production, screening, storing/delivery, and leaning phases of knowledge. The strength of shared information will be enhanced through international cooperation.

  12. Technology transfer and sustainable development in emerging economies

    OpenAIRE

    JAVIER CARRILLO

    2003-01-01

    (WP 01/03 Clave pdf) This paper aims to show how the process of diffusion of "clean technologies" confronts a variety of forces at the macro level that create systematic, technological and institutional barriers to their adoption. There is abundant literature on the role of technology transfer in the development of emerging economies, but this perspective is clearly new. What needs to be borne in mind is the possibility that the transferred dominant technology may be subject to a techno-insti...

  13. Global Air Mobility Advanced Technologies (GAMAT) Advanced Technology Development (ATD) Phase II Research and Development

    National Research Council Canada - National Science Library

    Kuper, Samuel R; Scott, Ronald; Kazmierczak, Thomas; Roth, Emilie; Whitaker, Randall

    2004-01-01

    ...) Advanced Technology Development (ATD) research and development program. The goal of the GAMAT ATD was to further the development of a new type of user interface technology called Work-Centered Support System (WCSS) technology. The U.S...

  14. Rationale, development, and design of the Altering Intake, Managing Symptoms (AIMS) dietary intervention for bowel dysfunction in rectal cancer survivors.

    Science.gov (United States)

    Sun, Virginia; Crane, Tracy E; Slack, Samantha D; Yung, Angela; Wright, Sarah; Sentovich, Stephen; Melstrom, Kurt; Fakih, Marwan; Krouse, Robert S; Thomson, Cynthia A

    2018-03-19

    Bowel dysfunction is a common, persistent long-term effect of treatment for rectal cancer survivors. Survivors often use dietary modifications to maintain bowel control. There are few evidence-based interventions to guide survivors on appropriate diet modifications for bowel symptom management. The purpose of this paper is to describe the development and design of the Altering Intake, Managing Symptoms (AIMS) intervention to support bowel dysfunction management in rectal cancer survivors. The AIMS intervention is a ten-session, telephone-based diet behavior change intervention delivered by trained health coaches. It uses dietary recall, participant-completed food and symptom diaries, and health coaching guided by motivational interviewing to promote bowel symptom management and improved diet quality. Based on the Chronic Care Self-Management Model (CCM), the AIMS Intervention is designed to improve self-efficacy and self-management of bowel symptoms by coaching survivors to appropriately modify their diets through goal setting, self-monitoring, and problem-solving. The intervention targets survivors with stage I-III rectosigmoid colon/rectum cancer who are 6 months post-treatment, 21 years and older, and English-speaking. The design and development process described in this paper provides an overview and underscores the potential of the AIMS intervention to positively impact the quality of long-term survivorship for rectal cancer survivors. An ongoing pilot study will inform the design and development of future multi-site Phase II and III randomized trials. Copyright © 2018. Published by Elsevier Inc.

  15. Development of MOX manufacturing technology in BNFL

    International Nuclear Information System (INIS)

    Buchan, P.G.; Powell, D.J.; Edwards, J.

    1998-01-01

    BNFL is successfully operating a small scale MOX fuel fabrication facility at its Sellafield Site and is currently constructing an advanced, commercial scale MOX facility to complement its existing LWR UO 2 fabrication capability. BNFL's MOX fuel capability is fully supported by a comprehensive technology development programme aimed at providing a high quality product which is successfully competing in the market. Building on the experience gained over the last 30 years, is from the production of both thermal and fast reactor MOX fuels, BNFL's development team set a standard for its MOX product which is targeted at exceeding the performance of UO 2 fuel in reactor. In order to meet the stringent design requirements the product development team has introduced the Short Binderless Route (SBR) process that is now used routinely in BNFL's MOX Demonstration Facility (MDF) and which forms the basis for BNFL's large scale Sellafield MOX Plant. This plant not only uses the SBR process for MOX production but also incorporates the most advanced technology available anywhere in the world for nuclear fuel production. A detailed account of the technology developed by BNFL to support its MOX fuels business will be provided, together with an explanation of the processes and plants used for MOX fuel production by BNFL. The paper also looks at the future needs of the MOX business and how improvements in pellet design can assist the MOX fabrication production process to meet the user demand requirements of utilities around the world. (author)

  16. Development of germline manipulation technologies in livestock

    International Nuclear Information System (INIS)

    Whitelaw, C.B.A.

    2005-01-01

    Genetic improvement by conventional breeding is restricted to those genetic loci present in the parental breeding individuals. Gene addition through transgenic technology offers a route to overcome this restriction. The transgene can be introduced into the germ cells or the fertilized zygote, using viral vectors, by simple co-culture or direct micro-injection. Alternatively, the transgene can be incorporated into a somatic cell, which is then incorporated into a developing embryo. This latter approach allows gene-targeting strategies to be employed. Using pronuclear injection methods, transgenic livestock have been generated with the aim of enhancing breeding traits of agricultural importance, or for biomedical applications. Neither has been taken beyond the development phase. Before they are, in addition to issues of commercial development, basic technological issues addressing inefficiency and complexity of the methodology need to be overcome, and appropriate gene targets identified. At the moment, perhaps the most encouraging development involves the use of viral vectors that offer increased simplicity and efficiency. By combining this new technology with transgenes that evoke the powerful intracellular machinery involved in RNA interference, pioneering applications to generate animals that are less susceptible to infectious disease may be possible. (author)

  17. Arctic Energy Technology Development Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sukumar Bandopadhyay; Charles Chamberlin; Robert Chaney; Gang Chen; Godwin Chukwu; James Clough; Steve Colt; Anthony Covescek; Robert Crosby; Abhijit Dandekar; Paul Decker; Brandon Galloway; Rajive Ganguli; Catherine Hanks; Rich Haut; Kristie Hilton; Larry Hinzman; Gwen Holdman; Kristie Holland; Robert Hunter; Ron Johnson; Thomas Johnson; Doug Kame; Mikhail Kaneveskly; Tristan Kenny; Santanu Khataniar; Abhijeet Kulkami; Peter Lehman; Mary Beth Leigh; Jenn-Tai Liang; Michael Lilly; Chuen-Sen Lin; Paul Martin; Pete McGrail; Dan Miller; Debasmita Misra; Nagendra Nagabhushana; David Ogbe; Amanda Osborne; Antoinette Owen; Sharish Patil; Rocky Reifenstuhl; Doug Reynolds; Eric Robertson; Todd Schaef; Jack Schmid; Yuri Shur; Arion Tussing; Jack Walker; Katey Walter; Shannon Watson; Daniel White; Gregory White; Mark White; Richard Wies; Tom Williams; Dennis Witmer; Craig Wollard; Tao Zhu

    2008-12-31

    The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

  18. Technological products to support the Venezuelan heavy oil development

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, J.; Negrin, Z.; Duran, M.; Vilera, M.; Santamaria, F. [PDVSA INTEVEP (Venezuela)

    2011-07-01

    In Venezuela, important reserves of heavy oil crude are located at the Orinoco oil belt and the challenge is to develop these fields in a safe and environmentally friendly way. To address this challenge, PDVSA Intevep has been developing cutting edge technologies for more than 30 years. The aim of this paper is to present the principal inventions of PDVSA Intevep and their application in the Venezuelan traditional areas. PDVSA Intevep is the technological development and research center of the Venezuelan national oil industry; they own 773 patents, 103 trademarks, 48 copyrights, 13 trade secrets and 35 products used in different technological areas. The technologies presented will be used in the Orinoco oil belt in support of Venezuelan technological sovereignty. PDVSA Intevep has developed and adapted many technologies aimed at putting oil resources at the service of the whole population and ending social inequalities.

  19. Cooperative technology development: An approach to advancing energy technology

    International Nuclear Information System (INIS)

    Stern, T.

    1989-09-01

    Technology development requires an enormous financial investment over a long period of time. Scarce national and corporate resources, the result of highly competitive markets, decreased profit margins, wide currency fluctuations, and growing debt, often preclude continuous development of energy technology by single entities, i.e., corporations, institutions, or nations. Although the energy needs of the developed world are generally being met by existing institutions, it is becoming increasingly clear that existing capital formation and technology transfer structures have failed to aid developing nations in meeting their growing electricity needs. This paper will describe a method for meeting the electricity needs of the developing world through technology transfer and international cooperative technology development. The role of nuclear power and the advanced passive plant design will be discussed. (author)

  20. Robotics Technology Development Program Cross Cutting and Advanced Technology

    International Nuclear Information System (INIS)

    Harrigan, R.W.; Horschel, D.S.

    1994-01-01

    Need-based cross cutting technology is being developed which is broadly applicable to the clean up of hazardous and radioactive waste within the US Department of Energy's complex. Highly modular, reusable technologies which plug into integrated system architectures to meet specific robotic needs result from this research. In addition, advanced technologies which significantly extend current capabilities such as automated planning and sensor-based control in unstructured environments for remote system operation are also being developed and rapidly integrated into operating systems

  1. INNOVATIVE DEVELOPMENT OF WAREHOUSE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Judit OLÁH

    2017-12-01

    Full Text Available The smooth operation of stocking and the warehouse play a very important role in all manufacturing companies; therefore ongoing monitoring and application of new techniques is essential to increase efficiency. The aim of our research is twofold: the utilization of the pallet shuttle racking system, and the introduction of a development opportunity by the merging of storage and order picking operations in the pallet shuttle system. It can be concluded that it is beneficial for the company to purchase two mobile cars in order to increase the utilization of the pallet shuttle racking system from 60% to 72% and that of the storage from 74% to 76%. We established that after the merging of the storage and order picking activities within the pallet shuttle system, the forklift driver can also complete the selection activities immediately after storage. By merging the two operations and saving time the number of forklift drivers can be reduced from 4 to 3 per shift.

  2. Open Technology Development: Roadmap Plan

    National Research Council Canada - National Science Library

    Herz, J. C; Lucas, Mark; Scott, John

    2006-01-01

    .... Collaborative and distributed online tools; and 4. Technological Agility. Open standards and interfaces were initially established through ARPA and distributed via open source software reference implementations...

  3. HTGR technology development: status and direction

    International Nuclear Information System (INIS)

    Kasten, P.R.

    1982-01-01

    During the last two years there has been an extensive and comprehensive effort expended primarily by General Atomic (GA) in generating a revised technology development plan. Oak Ridge National Laboratory (ORNL) has assisted in this effort, primarily through its interactions over the past years in working together with GA in technology development, but also through detailed review of the initial versions of the technology development plan as prepared by GA. The plan covers Fuel Technology, Materials Technology (including metals, graphite, and ceramics), Plant Technology (including methods, safety, structures, systems, heat exchangers, control and electrical, and mechanical), and Component Design Verification and Support areas

  4. Technological development in mechanical ventilation.

    Science.gov (United States)

    Conti, Giorgio; Costa, Roberta

    2010-02-01

    Innovative modes of mechanical ventilation, mainly based on complex closed loop technologies, have been recently developed and are now available for clinical use. Proportional assist ventilation with load-adjustable gain factors and neurally adjusted ventilatory assist are innovative modes of mechanical ventilation delivering a level of assistance proportional to the patient's effort, thus improving patient-ventilator synchrony and potentially representing a real clinical advantage. Adaptive support ventilation is a ventilatory mode delivering assisted (pressure support ventilation-like) or controlled breathing cycles (pressure-controlled-like), related to a minute ventilation target set by the clinician and on automated measurements of the patient's respiratory mechanics. Noisy pressure support ventilation, finally, is a recently described experimental evolution of pressure support, with some improvement potentials, but no clinical application till now. The recently reported results with proportional assist ventilation with load-adjustable gain factors, neurally adjusted ventilatory assist, and adaptive support ventilation are, till now, mainly based on preliminary physiologic and clinical studies; although they seem to be promising, suggesting that closed loop-based modes could represent a real innovation in the field of mechanical ventilation, further clinical evaluation is needed before their widespread diffusion into clinical practice.

  5. Development of superconductor application technology

    Energy Technology Data Exchange (ETDEWEB)

    Hong, G. W.; Kim, C. J.; Lee, H. G.; Lee, H. J.; Kim, K. B.; Won, D. Y.; Jang, K. I.; Kwon, S. C.; Kim, W. J.; Ji, Y. A.; Yang, S. W.; Kim, W. K.; Park, S. D.; Lee, M. H.; Lee, D. M.; Park, H. W.; Yu, J. K.; Lee, I. S.; Kim, J. J.; Choi, H. S.; Chu, Y.; Kim, Y. S.; Kim, D. H.

    1997-09-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm{sup 2} was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm{sup 2} was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs.

  6. Development of superconductor application technology

    International Nuclear Information System (INIS)

    Hong, G. W.; Kim, C. J.; Lee, H. G.; Lee, H. J.; Kim, K. B.; Won, D. Y.; Jang, K. I.; Kwon, S. C.; Kim, W. J.; Ji, Y. A.; Yang, S. W.; Kim, W. K.; Park, S. D.; Lee, M. H.; Lee, D. M.; Park, H. W.; Yu, J. K.; Lee, I. S.; Kim, J. J.; Choi, H. S.; Chu, Y.; Kim, Y. S.; Kim, D. H.

    1997-09-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm 2 was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm 2 was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs

  7. AND TECHNOLOGY FOR NATIONAL DEVELOPMENT

    African Journals Online (AJOL)

    within the interest and capabilities of all humans regardless of race, gender, national- ity or ethnicity (Byant & Swinton, ... and technology among men and women that are taken for granted have changed. The marginalization of .... Secondly, science and technology are perceived as powerful model for understanding and ...

  8. Success factors in technology development

    Science.gov (United States)

    Preston, John T.

    1995-01-01

    Universities in the U.S. have a significant impact on business through the transfer of technology. This paper describes goals and philosophy of the Technology Licensing Office at the Massachusetts Institute of Technology. This paper also relates the critical factors for susscessful technology transfer, particularly relating to new business formation. These critical factors include the quality of the technology, the quality of the management, the quality of the investor, the passion for success, and the image of the company. Descriptions of three different levels of investment are also given and the most successful level of investment for starting a new company is reviewed. Licensing to large companies is also briefly reviewed, as this type of licensing requires some different strategies than that of licensing to start-up companies. High quality critical factors and intelligent investment create rewards for the parties and successful ventures.

  9. Development of borehole sealing technology

    International Nuclear Information System (INIS)

    Shimada, Kuniaki; Abe, Kenichi; Tanada, Masuakira; Fujii, Mitsuru

    2004-03-01

    As a part of the geoscientific research in JNC Tono Geoscience Center, we are conducting the borehole investigation as a method of surveying techniques to gain an understanding of geological environment characterization (geology/geological structure, rock hydraulic characteristics, ground water geochemical characteristics and rock mechanics) from surface to deep underground. The borehole for the borehole investigation is used for monitoring hole after the borehole investigation. Since the borehole may act as a passage of groundwater flow and disturb the geological environment artificially, it has to be sealed in finally. Moreover, the hydraulic testing and the geochemical analysis of groundwater that be conducted in the zones injected some kind of lost circulation materials might be impacted on the accuracy of test result. The actual technologies regarding to these themes was researched and evaluated. In the second step, clarification of problems and procedure of R and D for solution of these problems was examined. In order to estimate the effect of lost circulation materials on hydraulic testing, a laboratory test of borehole behavior was performed using a scale model that consisted of a borehole and a water-loss zone. In this test, we found out that the lost circulation material was desorbed from the water-loss zone by back-flow action. It was proved by the test that there is little influence from lost circulation materials on hydraulic testing. Investigation regarding borehole sealing technology was conducted in literature search and interview to overseas researchers. In consequent, three kinds of materials - bentonite clay, bentonite pellet, and ethanol bentonite, were selected as effective sealing material. Moreover, five kinds of methods were selected as effective sealing methods. In water permeability test of sealing material, three kinds of sealing materials indicated lower permeability - order of 10 -11 m/sec, and it was evaluated that it could be worked

  10. Computer-based applications aimed at youth and adults with intellectual disability for the development of support areas

    Directory of Open Access Journals (Sweden)

    Maria Esther BAÑOS GARCÍA

    2018-03-01

    Full Text Available The use of Information and Communication Technologies is widely spread in all fields, including education. In the case of young people and adults with intellectual disabilities, it seems obvious that applications should serve to improve those supports to provide in the different functional areas. In this manuscript, 56 computer applications, in English and/or in Spanish, have been found by means of the search and study of reviews, scientific articles and web pages. Then, its connection with the support areas was evaluated by identifying the link for each computer application with each of the nine support areas. The findings confirm that the digital divide continues to increase and, in some cases, the treatment of the proposed activities promoting a childlike picture of this group is maintained. We found a low level of awareness of the support areas among developers and an imbalance in the applications, since some areas have great coverage while others have a residual presence. Promoting the consideration of the support areas among developers and further training for both educators and youth and adults with intellectual disabilities in order to reach a more productive use of ICT is recommended.

  11. FY-95 technology catalog. Technology development for buried waste remediation

    International Nuclear Information System (INIS)

    1995-01-01

    The US Department of Energy's (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described

  12. Status of Irradiation technology development in JMTR

    International Nuclear Information System (INIS)

    Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.

    2008-01-01

    Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Center was organized to development the new irradiation technology for the application at JMTR re operation. The new irradiation engineering building was remodeled from the old RI development building, and was started to use from the end of September, 2008. Advanced in situ instrumentation technology (high temperature multi paired thermocouple, ceramic sensor, application of optical measurement), 99M o production technology by new Mo solution irradiation method, recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian counties. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced

  13. Policy issues inherent in advanced technology development

    International Nuclear Information System (INIS)

    Baumann, P.D.

    1994-01-01

    In the development of advanced technologies, there are several forces which are involved in the success of the development of those technologies. In the overall development of new technologies, a sufficient number of these forces must be present and working in order to have a successful opportunity at developing, introducing and integrating into the marketplace a new technology. This paper discusses some of these forces and how they enter into the equation for success in advanced technology research, development, demonstration, commercialization and deployment. This paper limits itself to programs which are generally governmental funded, which in essence represent most of the technology development efforts that provide defense, energy and environmental technological products. Along with the identification of these forces are some suggestions as to how changes may be brought about to better ensure success in a long term to attempt to minimize time and financial losses

  14. Status of irradiation technology development in JMTR

    International Nuclear Information System (INIS)

    Inaba, Y.; Inoue, S.; Izumo, H.; Kitagishi, S.; Tsuchiya, K.; Saito, T.; Ishitsuka, E.

    2008-01-01

    Irradiation Engineering Section of the Neutron Irradiation and Testing Reactor Centre was organised to development the new irradiation technology for the application at JMTR re-operation. The new irradiation engineering building was remoulded from the old RI development building, and was started to use from the end of September, 2008. Advanced in-situ instrumentation technology(high temperature multi-paired thermocouple, ceramic sensor,application of optical measurement), 99 Mo production technology by new Mo solution irradiation method,recycling technology on used beryllium reflector, and so on are planned as the development of new irradiation technologies. The development will be also important for the education and training programs through the development of young generation in not only Japan but also Asian countries. In this report, as the status of the development the new irradiation technology, new irradiation engineering building, high temperature multi-paired thermocouple, experiences of optical measurement, recycling technology on used beryllium reflector are introduced

  15. Mobile Sensor Technologies Being Developed

    Science.gov (United States)

    Greer, Lawrence C.; Oberle, Lawrence G.

    2003-01-01

    The NASA Glenn Research Center is developing small mobile platforms for sensor placement, as well as methods for communicating between roving platforms and a central command location. The first part of this project is to use commercially available equipment to miniaturize an existing sensor platform. We developed a five-circuit-board suite, with an average board size of 1.5 by 3 cm. Shown in the preceding photograph, this suite provides all motor control, direction finding, and communications capabilities for a 27- by 21- by 40-mm prototype mobile platform. The second part of the project is to provide communications between mobile platforms, and also between multiple platforms and a central command location. This is accomplished with a low-power network labeled "SPAN," Sensor Platform Area Network, a local area network made up of proximity elements. In practice, these proximity elements are composed of fixed- and mobile-sensor-laden science packages that communicate to each other via radiofrequency links. Data in the network will be shared by a central command location that will pass information into and out of the network through its access to a backbone element. The result will be a protocol portable to general purpose microcontrollers satisfying a host of sensor networking tasks. This network will enter the gap somewhere between television remotes and Bluetooth but, unlike 802.15.4, will not specify a physical layer, thus allowing for many data rates over optical, acoustical, radiofrequency, hardwire, or other media. Since the protocol will exist as portable C-code, developers may be able to embed it in a host of microcontrollers from commercial to space grade and, of course, to design it into ASICs. Unlike in 802.15.4, the nodes will relate to each other as peers. A demonstration of this protocol using the two test bed platforms was recently held. Two NASA modified, commercially available, mobile platforms communicated and shared data with each other and a

  16. Development of fabrication technology for ceramic nuclear fuel

    International Nuclear Information System (INIS)

    Lee, Young Woo; Sohn, D. S.; Na, S. H.

    2003-05-01

    The purpose of the study is to develop the fabrication technology of MOX fuel. The researches carried out during the last stage(1997. 4.∼2003. 3.) mainly consisted of ; study of MOX pellet fabrication technology for application and development of characterization technology for the aim of confirming the development of powder treatment technology and sintering technology and of the optimization of the above technologies and fabrication of Pu-MOX pellet specimens through an international joint collaboration between KAERI and PSI based on the fundamental technologies developed in KAERI. Based on the studies carried out and the results obtained during the last stage, more extensive studies for the process technologies of the unit processes were performed, in this year, for the purpose of development of indigenous overall MOX pellet fabrication process technology, relating process parameters among the unit processes and integrating these unit process technologies. Furthermore, for the preparation of transfer of relevant technologies to the industries, a feasibility study was performed on the commercialization of the technology developed in KAERI with the relevant industry in close collaboration

  17. Empowering employees with chronic diseases; development of an intervention aimed at job retention and design of a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Heutink Annelies

    2008-11-01

    Full Text Available Abstract Background Persons with a chronic disease are less often employed than healthy persons. If employed, many of them experience problems at work. Therefore, we developed a training programme aimed at job retention. The objective of this paper is to describe this intervention and to present the design of a study to evaluate its effectiveness. Development and description of intervention A systematic review, a needs assessment and discussions with Dutch experts led to a pilot group training, tested in a pilot study. The evaluation resulted in the development of a seven-session group training combined with three individual counselling sessions. The training is based on an empowerment perspective that aims to help individuals enhance knowledge, skills and self-awareness. These advances are deemed necessary for problem solving in three stages: exploration and clarification of work related problems, communication at the workplace, and development and implementation of solutions. Seven themes are discussed and practised in the group sessions: 1 Consequences of a chronic disease in the workplace, 2 Insight into feelings and thoughts about having a chronic disease, 3 Communication in daily work situations, 4 Facilities for disabled employees and work disability legislation, 5 How to stand up for oneself, 6 A plan to solve problems, 7 Follow-up. Methods Participants are recruited via occupational health services, patient organisations, employers, and a yearly national conference on chronic diseases. They are eligible when they have a chronic physical medical condition, have a paid job, and experience problems at work. Workers on long-term, 100% sick leave that is expected to continue during the training are excluded. After filling in the baseline questionnaire, the participants are randomised to either the control or the intervention group. The control group will receive no care or care as usual. Post-test mail questionnaires will be sent after 4, 8

  18. After the Conference of United Nations Conference on Environment and Development. The aims of the state environmental policy

    International Nuclear Information System (INIS)

    1996-01-01

    Total 162 aims of the Strategy of the state environmental policy and next followed programs, projects and measures of the environmental policy of the Slovak Republic can be grouped into 4 blocks: (1) the environmental policy in the protection of air, water and before of risk factors, in the nuclear safety and waste economy (environmental safety; (2) the environmental policy in protection of the nature and the country, protection and use of mineral surroundings, soils and forest;; (3) the environmental policy in the economy; (4) the environmental policy in the guidance, education, public information, organization, control and coordination of the ministration on the environment. These aims are grouped into 10 sectors: Sector A - Protection of the air and ozone layer; Sector B - Protection and rationalize waters use; Sector C - Waste economy; Sector D - Risk factors and nuclear safety; Sector E - The ministration on the nature and the country and land development; Sector F - The protection and using of mineral surroundings, soils and forest; Sector G - The economy of the environment; Sector H - Environmental information science and monitoring; Sector I - Environmental guidance, education, and promotion; Sector J - Organization and control of the ministration on the environment

  19. Electric Aircraft Systems Technology Development

    Data.gov (United States)

    National Aeronautics and Space Administration — This project looks at multiple manned/unmanned full-scale/sub-scale flying research prototypes that will lead to the integration of electric propulsion technology on...

  20. Additive Manufacturing Technology Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The 3D Printing In Zero-G (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling...

  1. Development of Pollution Prevention Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Polle, Juergen [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States); Sanchez-Delgado, Roberto [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States)

    2013-12-30

    This project investigated technologies that may reduce environmental pollution. This was a basic research/educational project addressing two major areas: A. In the algae research project, newly isolated strains of microalgae were investigated for feedstock production to address the production of renewable fuels. An existing collection of microalgae was screened for lipid composition to determine strains with superior composition of biofuel molecules. As many microalgae store triacylglycerides in so-called oil bodies, selected candidate strains identified from the first screen that accumulate oil bodies were selected for further biochemical analysis, because almost nothing was known about the biochemistry of these oil bodies. Understanding sequestration of triacylglycerides in intracellular storage compartments is essential to developing better strains for achieving high oil productivities by microalgae. At the onset of the project there was almost no information available on how to obtain detailed profiles of lipids from strains of microalgae. Our research developed analytical methods to determine the lipid profiles of novel microalgal strains. The project was embedded into other ongoing microalgal projects in the Polle laboratory. The project benefited the public, because students were trained in cell cultivation and in the operation of state-of-the-art analytical equipment. In addition, students at Brooklyn College were introduced into the concept of a systems biology approach to study algal biofuels production. B. A series of new nanostructured catalysts were synthesized, and characterized by a variety of physical and chemical methods. Our catalyst design leads to active nanostructures comprising small metal particles in intimate contact with strongly basic sites provided by the supports, which include poly(4-vinylpyridine), magnesium oxide, functionalized multi-walled carbon nanotubes, and graphene oxide. The new materials display a good potential as catalysts

  2. Modern Methods of Management Decision-Making in Entrepreneurial Structures Aimed at Sustainable Development in Conditions of Crisis

    Directory of Open Access Journals (Sweden)

    Marina Viktorovna Glazova

    2016-06-01

    Full Text Available The aim of the article is to develop a method for management decisionmaking, ensuring the sustainable development of enterprise structures in the conditions of crisis. To this end, the author makes a comparative analysis of modern methods of justification, adoption and implementation of administrative decisions in enterprise structures, focused on sustainable development in the conditions of crisis. The results of this analysis show that all of these methods involve quantifying the scale of different criteria, which do not reflect causal logic of the preferences of some other criteria. The results of the ranking cannot be distinguished from a number of other similar ratings (with slight differences in the weights, therefore, the expected nature of the uniqueness of the decision-making model is not provided. To solve the problems indicated in this paper, we propose an alternative approach to the aggregation of conflicting preferences of managerial decisions: to come up with a quality solution to resolve conflicts between the preferences of solutions through a variety of criteria, and to aggregate them to the final decision. The author develops unified method of decision-making. The fact that the method provides information to clarify the criteria values and the reasons for their relative importance to the decision makes it particularly attractive in times of crisis, as it creates an opportunity for the delegation of authority and the use of standard solutions. It allows to reflect the logic and the causal relationships of ranking criteria, as well as to simplify the process of management decision-making, eliminating it from a difficult procedure for placing the weighting factors. The method is recommended for the use in making decisions with a small number of options and criteria. It can also be used as a test has taken management decisions, taking into account only the most significant criteria.

  3. Climate change 2 - Canadian technology development conference

    International Nuclear Information System (INIS)

    Tsang, K.T.

    2001-01-01

    These Conference Proceedings summarise the program of the 'Climate Change 2: Canadian Technology Development' Conference held on October 3-5, 2001 in Toronto, Ontario, Canada. The Conference program was multidisciplinary, representing diverse science and technology-oriented associations and organizations from across Canada. The conference was designed to provide a forum to explore and showcase Canadian technologies that could be developed and deployed to reduce greenhouse-gas emissions and/or remove greenhouse gases from the atmosphere. The Conference brought together national and provincial policy makers and innovators to discover, discuss and develop technologies and strategies to encourage appropriate energy, agriculture and forestry technology

  4. Guiding recombinant antivenom development by omics technologies

    DEFF Research Database (Denmark)

    Laustsen, Andreas Hougaard

    2017-01-01

    , endogenous animal proteins with toxin-neutralizing capabilities, and recombinant monoclonal antibodies. Harnessing either of these approaches, antivenom development may benefit from an in-depth understanding of venom compositions and the medical importance of individual venom toxins. Focus is thus also...... directed towards the different omics technologies (particularly venomics, antivenomics, and toxicovenomics) that are being used to uncover novel animal toxins, shed light on venom complexity, and provide directions for how to determine the medical relevance of individual toxins within whole venoms. Finally......In this review, the different approaches that have been employed with the aim of developing novel antivenoms against animal envenomings are presented and discussed. Reported efforts have focused on the use of innovative immunization strategies, small molecule inhibitors against enzymatic toxins...

  5. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  6. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  7. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  8. Information technology for sustainable development

    DEFF Research Database (Denmark)

    Holgaard, Jette Egelund; Guerra, Aida; Knoche, Hendrik

    2013-01-01

    In this paper we present different strategies to integrate concerns about sustainability into Information and Communication Technology (ITC) projects by use of problem based learning (PBL) methodology. In alignment with PBL we introduce two different models for problem analysis where students move...... that initiate design, implementation and test of ICT for SD. On the empirical level we draw from experiments in autumn 2009 and spring 2013 within the field of Media technology. Observations, text analysis of students’ work as well as reflections from staff has been relied on in order to analyse the practical...

  9. History of nuclear technology development in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp [Visiting Professor, at the Faculty of Petroleum and Renewable Energy Engineering, University Teknologi Malaysia Johor Bahru 81310 (Malaysia); General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195 (Japan)

    2015-04-29

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

  10. History of nuclear technology development in Japan

    International Nuclear Information System (INIS)

    Yamashita, Kiyonobu

    2015-01-01

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident

  11. Development of NDT technology of the welds

    International Nuclear Information System (INIS)

    Li Jianwen; Xu Yansen; Wang Zengyong

    2002-01-01

    Non-destructive testing (NDT) and its up-to-date development are summarized, including the advantages and disadvantages and the development of NDT technology. The up-to-date development of X-ray imaging and industrial CT is emphasised on, and the fundamental theory of ultrasonic imaging and related signal processing technology is introduced

  12. Understanding Technology: Key to Development. | Bvekerwa ...

    African Journals Online (AJOL)

    This paper observes that technology as a concept is not fully understood in the developing world. More often than not technology and science are taken to mean the same thing. It is argued here that the two terms are not synonymous but are actually two sides of the same coin. It is further illustrated that technology is not ...

  13. The develop of technology production in Spain

    International Nuclear Information System (INIS)

    Fernandez Labastida, J. M.

    2007-01-01

    Spanish Science and Technology system has been very effective in scientific production but not in technology transfer to economic activities. A cultural change is needed to improve the knowledge transfer mechanisms. Some specific actions are proposed in order to develop useful instruments to achieve a better technology transfer system. (Author)

  14. Pathways to Inclusive Development through Innovation, Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Technology and innovation can drive economic growth, help solve social and environmental problems, and reduce poverty. All countries need to develop the capacity to produce and use science and technology themselves and adapt knowledge to their needs and contexts. While industrial upgrading through technology ...

  15. Pipe Leak Detection Technology Development

    Science.gov (United States)

    The U. S. Environmental Protection Agency (EPA) has determined that one of the nation’s biggest infrastructural needs is the replacement or rehabilitation of the water distribution and transmission systems. The institution of more effective pipe leak detection technology will im...

  16. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  17. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; hide

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  18. Innovative Technology Development Program. Final summary report

    International Nuclear Information System (INIS)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Program. The plan is part of the DOE's program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE's clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process

  19. Innovative Technology Development Program. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program. The plan is part of the DOE`s program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE`s clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process.

  20. Technology transfer in the Clean Development Mechanism

    International Nuclear Information System (INIS)

    De Coninck, H.C.; Haake, F.; Van der Linden, N.H.

    2007-01-01

    Technology transfer is often mentioned as an ancillary benefit of the Kyoto Protocol's Clean Development Mechanism (CDM), but this claim has never been researched or substantiated. The question of technology transfer is important from two perspectives: for host countries, whether the CDM provides a corridor for foreign, climate-friendly technologies and investment, and for industrialised countries as it provides export potential for climate-friendly technologies developed as a consequence of stringent greenhouse gas targets. In order to better understand whether technology transfer from the EU and elsewhere is occurring through the CDM, and what is the value of the associated foreign investment, this paper examines technology transfer in the 63 CDM projects that were registered on January 1st, 2006. Technology originates from outside the host country in almost 50% of the evaluated projects. In the projects in which the technology originates from outside the host country, 80% use technology from the European Union. Technologies used in non-CO2 greenhouse gas and wind energy projects, and a substantial share of the hydropower projects, use technology from outside the host country, but biogas, agricultural and biomass projects mainly use local technology. The associated investment value with the CDM projects that transferred technology is estimated to be around 470 million Euros, with about 390 coming from the EU. As the non-CO2 greenhouse gas projects had very low capital costs, the investment value was mostly in the more capital-intensive wind energy and hydropower projects

  1. Learning in renewable energy technology development

    International Nuclear Information System (INIS)

    Junginger, M.

    2005-01-01

    The main objectives of this thesis are: to investigate technological change and cost reduction for a number of renewable electricity technologies by means of the experience curve approach; to address related methodological issues in the experience curve approach, and, based on these insights; and to analyze the implications for achieving the Dutch renewable electricity targets for the year 2020 within a European context. In order to meet these objectives, a number of research questions have been formulated: What are the most promising renewable electricity technologies for the Netherlands until 2020 under different technological, economic and environmental conditions?; To what extent is the current use of the experience curve approach to investigate renewable energy technology development sound, what are differences in the utilization of this approach and what are possible pitfalls?; How can the experience curve approach be used to describe the potential development of partially new energy technologies, such as offshore wind energy? Is it possible to describe biomass fuel supply chains with experience curves? What are the possibilities and limits of the experience curve approach when describing non-modular technologies such as large (biomass) energy plants?; What are the main learning mechanisms behind the cost reduction of the investigated technologies?; and How can differences in the technological progress of renewable electricity options influence the market diffusion of renewable electricity technologies, and what implications can varying technological development and policy have on the implementation of renewable electricity technologies in the Netherlands? The development of different renewable energy technologies is investigated by means of some case studies. The possible effects of varying technological development in combination with different policy backgrounds are illustrated for the Netherlands. The thesis focuses mainly on the development of investment

  2. Microhole Drilling Tractor Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Western Well Tool

    2007-07-09

    In an effort to increase the U.S. energy reserves and lower costs for finding and retrieving oil, the USDOE created a solicitation to encourage industry to focus on means to operate in small diameter well-Microhole. Partially in response to this solicitation and because Western Well Tool's (WWT) corporate objective to develop small diameter coiled tubing drilling tractor, WWT responded to and was awarded a contract to design, prototype, shop test, and field demonstrate a Microhole Drilling Tractor (MDT). The benefit to the oil industry and the US consumer from the project is that with the MDT's ability to facilitate Coiled Tubing drilled wells to be 1000-3000 feet longer horizontally, US brown fields can be more efficiently exploited resulting in fewer wells, less environmental impact, greater and faster oil recovery, and lower drilling costs. Shortly after award of the contract, WWT was approached by a major oil company that strongly indicated that the specified size of a tractor of 3.0 inches diameter was inappropriate and that immediate applications for a 3.38-inch diameter tractor would substantially increase the usefulness of the tool to the oil industry. Based on this along with an understanding with the oil company to use the tractor in multiple field applications, WWT applied for and was granted a no-cost change-of-scope contract amendment to design, manufacture, assemble, shop test and field demonstrate a prototype a 3.38 inch diameter MDT. Utilizing existing WWT tractor technology and conforming to an industry developed specification for the tool, the Microhole Drilling Tractor was designed. Specific features of the MDT that increase it usefulness are: (1) Operation on differential pressure of the drilling fluid, (2) On-Off Capability, (3) Patented unique gripping elements (4) High strength and flexibility, (5) Compatibility to existing Coiled Tubing drilling equipment and operations. The ability to power the MDT with drilling fluid results in a

  3. KSC Education Technology Research and Development Plan

    Science.gov (United States)

    Odell, Michael R. L.

    2003-01-01

    Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

  4. Technology development for radiation shielding analysis

    International Nuclear Information System (INIS)

    Ha, Jung Woo; Lee, Jae Kee; Kim, Jong Kyung

    1986-12-01

    Radiation shielding analysis in nuclear engineering fields is an important technology which is needed for the calculation of reactor shielding as well as radiation related safety problems in nuclear facilities. Moreover, the design technology required in high level radioactive waste management and disposal facilities is faced on serious problems with rapidly glowing nuclear industry development, and more advanced technology has to be developed for tomorrow. The main purpose of this study is therefore to build up the self supporting ability of technology development for the radiation shielding analysis in order to achieve successive development of nuclear industry. It is concluded that basic shielding calculations are possible to handle and analyze by using our current technology, but more advanced technology is still needed and has to be learned for the degree of accuracy in two-dimensional shielding calculation. (Author)

  5. Development of proliferation resistant isotope separation technology

    International Nuclear Information System (INIS)

    Jeong, Doyoung; Ko, Kwanghoon; Kim, Taeksoo; Park, Hyunmin; Lim, Gwon; Cha, Yongho; Han, Jaemin; Baik, Sunghoon; Cha, Hyungki

    2012-02-01

    This project was accomplished with an aim of establishing the industrial facilities for isotope separation in Korea. The experiment for the measurement of neutrino mass that has been an issue in physics, needs very much of enriched calcium-48 isotope. However, calcium-48 isotope can be produced only by the electro-magnetic method and, thus, its price is very expensive. Therefore, we expect that ALSIS can replace the electro-magnetic method for calcium-48 isotope production. In this research stage, the research was advanced systematically with core technologies, such as atomic vapor production, the measurement of vapor characteristics and stable and powerful laser development. These researches will be the basis of the next research stages. In addition, the international research trends and cooperation results are reported in this report

  6. Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

    International Nuclear Information System (INIS)

    Moe, Wayne Leland

    2015-01-01

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a ''critical path'' for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain ''minimum'' levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial ''first step'' in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by

  7. Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-08-23

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

  8. Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

  9. Technological Developments in Networking, Education and Automation

    CERN Document Server

    Elleithy, Khaled; Iskander, Magued; Kapila, Vikram; Karim, Mohammad A; Mahmood, Ausif

    2010-01-01

    "Technological Developments in Networking, Education and Automation" includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the following areas: Computer Networks: Access Technologies, Medium Access Control, Network architectures and Equipment, Optical Networks and Switching, Telecommunication Technology, and Ultra Wideband Communications. Engineering Education and Online Learning: including development of courses and systems for engineering, technical and liberal studies programs; online laboratories; intelligent

  10. SRS environmental technology development field test platform

    International Nuclear Information System (INIS)

    Riha, B.D.; Rossabi, J.; Eddy-Dilek, C.A.

    1995-01-01

    A critical and difficult step in the development and implementation of new technologies for environmental monitoring and characterization is successfully transferring these technologies to industry and government users for routine assessment and compliance activities. The Environmental Sciences Section of the DOE Savannah River Technology Center provides a forum for developers, potential users, and regulatory organizations to evaluate new technologies in comparison with baseline technologies in a well characterized field test bed. The principal objective of this project is to conduct comprehensive, objective field tests of monitoring and characterization technologies that are not currently used in EPA standard methods and evaluate their performance during actual operating conditions against baseline methods. This paper provides an overview of the field test site and a description of some of the technologies demonstrated at the site including their field applications

  11. The DOE safeguards and security technology development program

    International Nuclear Information System (INIS)

    Cherry, R.C.; Wheelock, A.J.

    1991-01-01

    This paper reports that strategic planning for safeguards and security within the Department of Energy emphasizes the contributions of advanced technologies to the achievement of Departmental protection program goals. The Safeguards and Security Technology Development Program provides state-of-the-art technologies, systems and technical services in support of the policies and programmatic requirements for the protection of Departmental assets. The Program encompasses research and development in physical security, nuclear material control and accountability, information security and personnel security, and the integration of these disciplines in advanced applications. Technology development tasks serve goals that range from the maintenance of an effective technology base to the development, testing and evaluation of applications to meet field needs. A variety of factors, from the evolving threat to reconfiguration of the DOE complex and the technical requirements of new facilities, are expected to influence safeguards and security technology requirements and development efforts. Implementation of the Program is based on the systematic identification, prioritization and alignment of technology development tasks and needs. Initiatives currently underway are aimed at enhancing technology development project management. Increased management attention is also being placed on efforts to promote the benefits of the Program through technology transfer and interagency liaison

  12. Modern Trends in the Development of Business Technologies in Entrepreneurship

    Directory of Open Access Journals (Sweden)

    Dudko Pavlo M.

    2017-09-01

    Full Text Available The aim of the article is to study modern trends in the development of business technologies and their integration into entrepreneurship. Business technologies are a combination of methods, techniques, innovations, technical and mental solutions that promote development of business, expand its capabilities and create new prospects for it. The main business technologies that are widely used in entrepreneurship and have gained worldwide recognition include franchising, leasing, outsourcing, cashback, clustering. Due to the rapid development of information technologies and the Internet, such business technologies as e-commerce, IT outsourcing, offshore programming, crowdsourcing and the CRM strategy have emerged. At the same time, business technologies develop independently and without using modern technical innovations, an example of which is co-marketing. Summarizing, it can be noted that business technologies are not only the existing methods of business development but also a constant and dynamic search for new solutions in entrepreneurship. The development and improvement of the existing business technologies, as well as the emergence of new ones, directly depends on the technological progress and development of mankind.

  13. Social and Technological Development in Context

    DEFF Research Database (Denmark)

    Koch, Christian

    1997-01-01

    This papers studies the processes developing technology and its social "sorroundings", the social networks. Positions in the debate on technological change is discussed. A central topic is the enterprise external development and decision processes and their interplay with the enterprise internal...

  14. Information and Communication Technologies for Development in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Information and Communication Technologies for Development in the Middle East : Exploration. This project seeks to foster an inclusive knowledge society by building capacity to apply information and communication technology (ICT) to human, social and economic development in the Middle ... Royal Scientific Society.

  15. Aligning Technology Education Teaching with Brain Development

    Science.gov (United States)

    Katsioloudis, Petros

    2015-01-01

    This exploratory study was designed to determine if there is a level of alignment between technology education curriculum and theories of intellectual development. The researcher compared Epstein's Brain Growth Theory and Piaget's Status of Intellectual Development with technology education curriculum from Australia, England, and the United…

  16. New nuclear technology; International developments. Review 1995

    International Nuclear Information System (INIS)

    Devell, L.; Aggeryd, I.; Hultgren, Aa.; Lundell, B.; Pedersen, T.

    1995-09-01

    A summary review of the development of new nuclear rector technology is presented in this report. Fuel cycle strategies and waste handling developments are also commented. Different plans for dismantling nuclear weapons are presented. 18 refs

  17. Biofloc technology application in aquaculture to support sustainable development goals

    OpenAIRE

    Bossier, Peter; Ekasari, Julie

    2017-01-01

    Summary Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The...

  18. Biofloc technology application in aquaculture to support sustainable development goals

    OpenAIRE

    Bossier, P.; Ekasari, J.

    2017-01-01

    Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The biofloc...

  19. The DOE Office of Technology Development robotics program

    International Nuclear Information System (INIS)

    Yarbrough, L.W.; Williams, A.; Pasini, J. III

    1992-01-01

    The objective of the Robotics Technology Development Program (RTDP) is to develop and apply technologies for environmental restoration and waste management that will be applicable throughout the U.S. Department of Energy (DOE) complex. These efforts are aimed at: (1) reducing worker exposure and increasing safety through remote operation and control of equipment; (2) increasing productivity through enhanced capabilities and automation; and (3) reducing costs by faster completion of remediation activities, that in turn will reduce life-cycle costs. (author)

  20. Research status and development of application fields in enzyme technology

    Science.gov (United States)

    Ji, Y. B.; Wang, S. W.; Yu, M.; Ru, X.; Wei, C.; Zhu, H. J.; Li, Z. Y.; Zhao, H.; Qiao, A. N.; Guo, S. Z.; Lu, L.

    2018-01-01

    Biological enzymes are catalyzed by living cells, most of which are proteins, and very few are RNA. Biological engineering as a new high-tech has been rapid development, Enzyme manufacturing and application areas are gradually expanding, In this paper, the status and progress of the application of enzyme technology are reviewed by reviewing the literature. and aims to provide reference for the application of enzyme technology and provide scientific basis for its future research and development in new field.

  1. Development of Food Preservation and Processing Technologies by Radiation Technology

    International Nuclear Information System (INIS)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun

    2007-07-01

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  2. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  3. Development of environmental radiation control technology

    International Nuclear Information System (INIS)

    Kim, Ingyu; Kim, Enhan; Keum, Dongkwon

    2012-04-01

    To develop the comprehensive environmental radiation management technology, - An urban atmospheric dispersion model and decision-aiding model have been developed. - The technologies for assessing the radiation impact to non-human biota and the environmental medium contamination have developed. - The analytical techniques of the indicator radionuclides related to decommissioning of nuclear facilities and nuclear waste repository have been developed. - The national environmental radiation impact has been assessed, and the optimum management system of natural radiation has been established

  4. Development of high burnup nuclear fuel technology

    International Nuclear Information System (INIS)

    Suk, Ho Chun; Kang, Young Hwan; Jung, Jin Gone; Hwang, Won; Park, Zoo Hwan; Ryu, Woo Seog; Kim, Bong Goo; Kim, Il Gone

    1987-04-01

    The objectives of the project are mainly to develope both design and manufacturing technologies for 600 MWe-CANDU-PHWR-type high burnup nuclear fuel, and secondly to build up the foundation of PWR high burnup nuclear fuel technology on the basis of KAERI technology localized upon the standard 600 MWe-CANDU- PHWR nuclear fuel. So, as in the first stage, the goal of the program in the last one year was set up mainly to establish the concept of the nuclear fuel pellet design and manufacturing. The economic incentives for high burnup nuclear fuel technology development are improvement of fuel utilization, backend costs plant operation, etc. Forming the most important incentives of fuel cycle costs reduction and improvement of power operation, etc., the development of high burnup nuclear fuel technology and also the research on the incore fuel management and safety and technologies are necessary in this country

  5. Development of technologies for solar energy utilization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.

  6. Technology development and applications at Fernald

    International Nuclear Information System (INIS)

    Pettit, P.J.; Skriba, M.C.; Warner, R.D.

    1995-01-01

    At the Fernald Environmental Management Project (FEMP) northwest of Cincinnati, Ohio, the U.S. Department of Energy and contractor Fernald Environmental Restoration Management Corporation (FERMCO) are aggressively pursuing both the development and the application of improved, innovative technology to the environmental restoration task. Application of emerging technologies is particularly challenging in a regulatory environment that places pressure on operational managers to develop and meet tight schedules. The regulatory and operational needs make close communication essential between technology developers and technology users (CERCLA/RCRA Unit managers). At Fernald this cooperation and communication has led, not only to the development and demonstration of new technologies with applications at other sites, but also to application of new technologies directly to the Fernald clean up. New technologies have been applied to improve environmental safety and health, improve the effectiveness of restoration efforts, and to cut restoration costs. The paper will describe successful efforts to develop and apply new technologies at the FEMP and will emphasize those technologies that have been applied and are planned for use in the clean up of this former uranium production facility

  7. Mirror fusion vacuum technology developments

    International Nuclear Information System (INIS)

    Batzer, T.H.; Call, W.R.

    1983-01-01

    Magnetic Mirror Fusion experiments, such as MFTF-B+T (Mirror Fusion Test Facility-B, Tritium Upgrade) and foreseeable follow-on devices, have operational and maintenance requirements that have not yet been fully demonstrated. Among those associated with vacuum technology are the very-high continuous-pumping speeds, 10 7 to 10 8 l/s for D 2 , T 2 and, to a lesser extent, He; the early detection of water leaks from the very-high heat-flux neutral-beam dumps and the detection and location of leaks in the superconducting magnets not protected by guard vacuums. Possible solutions to these problems have been identified and considerable progress has been made toward successfully demonstrating their feasibility

  8. Technologies for a sustainable development; Technologies pour un developpement durable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The European Event on Technology (EET), a recurrent annual event since 1992, is a major meeting opportunity for researchers and engineers as well as private and public decision-makers, on technologies, their evolution and their industrial and social implications. In less than a decade, sustainable development has become both an economic and a political priority. It was urgent and legitimate that those who are the mainsprings should take hold of the subject and give it technological content, estimate its costs and define clear timetables. The debates consist of: plenary sessions on environmental, social and economic stakes of sustainable development and the challenges for, and commitment of engineers, managers and politicians with respect to these goals; and workshops, which provide an overview of recently acquired or upcoming technologies developed by sector: energy, transports, new information technologies, new industrial manufacturing technologies (materials, products, services), waste management, global environment monitoring, water management, bio-technologies, and innovation management. This document brings together the different talks given by the participants. Among these, the following ones fall into the energy and environment scope: energy efficiency of buildings: towards energy autonomy; superconductors enable in new millennium for electric power industry; advanced gas micro-turbine-driven generator technology; environmental and technical challenges of an offshore wind farm; future nuclear energy systems; modelling combustion in engines: progress and prospects for reducing emissions; on-board computers: reduction in consumption and emissions of engine-transmission units for vehicles; polymer-lithium batteries: perspectives for zero-emission traction; hybrid vehicles and energy/environmental optimization: paths and opportunities; fuel cells and zero-emission: perspectives and developments; global change: causes, modeling and economic issues; the GMES

  9. Development of isotope hydrology technology in China

    International Nuclear Information System (INIS)

    Li Zhangsu

    1988-01-01

    The development of isotope hydrology technology in China is described. The isotope technology provides an independent approach for solving hydrological problems. Isotope hydrology is applied in three ways: the use of change in environmental isotopic composition of water (especially used in water resources exploitation), the use of artificial radioactive tracers and the use of redioisotope instruments. Many important achievements have been obtained in application of isotopic hydrology technology. For the sake of promoting rapid development of isotope hydrology the topics on management, technology and others are commented

  10. Space Technology Mission Directorate: Game Changing Development

    Science.gov (United States)

    Gaddis, Stephen W.

    2015-01-01

    NASA and the aerospace community have deep roots in manufacturing technology and innovation. Through it's Game Changing Development Program and the Advanced Manufacturing Technology Project NASA develops and matures innovative, low-cost manufacturing processes and products. Launch vehicle propulsion systems are a particular area of interest since they typically comprise a large percentage of the total vehicle cost and development schedule. NASA is currently working to develop and utilize emerging technologies such as additive manufacturing (i.e. 3D printing) and computational materials and processing tools that could dramatically improve affordability, capability, and reduce schedule for rocket propulsion hardware.

  11. Development of coal energy utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Coal liquefaction produces new and clean energy by performing hydrogenation, decomposition and liquefaction on coal under high temperatures and pressures. NEDO has been developing bituminous coal liquefaction technologies by using a 150-t/d pilot plant. It has also developed quality improving and utilization technologies for liquefied coal, whose practical use is expected. For developing coal gasification technologies, construction is in progress for a 200-t/d pilot plant for spouted bed gasification power generation. NEDO intends to develop coal gasification composite cycle power generation with high efficiency and of environment harmonious type. This paper summarizes the results obtained during fiscal 1994. It also dwells on technologies to manufacture hydrogen from coal. It further describes development of technologies to manufacture methane and substituting natural gas (SNG) by hydrogenating and gasifying coal. The ARCH process can select three operation modes depending on which of SNG yield, thermal efficiency or BTX yield is targeted. With respect to promotion of coal utilization technologies, description is given on surveys on development of next generation technologies for coal utilization, and clean coal technology promotion projects. International coal utilization and application projects are also described. 9 figs., 3 tabs.

  12. Supporting medical technology development with the analytic hierarchy process

    NARCIS (Netherlands)

    Hummel, J. Marjan

    2001-01-01

    This thesis aims to develop an adequate method of CTA to influence decision making about the development and clinical application of a medical technology. The adequacy of this method is related to the timing of its application, the information used in the assessment, the consensus formation about,

  13. Enabling Professionals to Change Practices Aimed at Tackling Social Inequality through Professional Development: Results from a Case Study

    Science.gov (United States)

    Jensen, Bente; Brandi, Ulrik

    2018-01-01

    Research has shown the potential for early childhood education and care (ECEC) in making a difference for all children. However, research also highlights how hard overcoming the "gaps" between children from differing social backgrounds still is. The overall aim of this article is to examine the impact of a professional development…

  14. Technological Microbiology: Development and Applications

    Directory of Open Access Journals (Sweden)

    Luciana C. Vitorino

    2017-05-01

    Full Text Available Over thousands of years, modernization could be predicted for the use of microorganisms in the production of foods and beverages. However, the current accelerated pace of new food production is due to the rapid incorporation of biotechnological techniques that allow the rapid identification of new molecules and microorganisms or even the genetic improvement of known species. At no other time in history have microorganisms been so present in areas such as agriculture and medicine, except as recognized villains. Currently, however, beneficial microorganisms such as plant growth promoters and phytopathogen controllers are required by various agricultural crops, and many species are being used as biofactories of important pharmacological molecules. The use of biofactories does not end there: microorganisms have been explored for the synthesis of diverse chemicals, fuel molecules, and industrial polymers, and strains environmentally important due to their biodecomposing or biosorption capacity have gained interest in research laboratories and in industrial activities. We call this new microbiology Technological Microbiology, and we believe that complex techniques, such as heterologous expression and metabolic engineering, can be increasingly incorporated into this applied science, allowing the generation of new and improved products and services.

  15. Technological Microbiology: Development and Applications.

    Science.gov (United States)

    Vitorino, Luciana C; Bessa, Layara A

    2017-01-01

    Over thousands of years, modernization could be predicted for the use of microorganisms in the production of foods and beverages. However, the current accelerated pace of new food production is due to the rapid incorporation of biotechnological techniques that allow the rapid identification of new molecules and microorganisms or even the genetic improvement of known species. At no other time in history have microorganisms been so present in areas such as agriculture and medicine, except as recognized villains. Currently, however, beneficial microorganisms such as plant growth promoters and phytopathogen controllers are required by various agricultural crops, and many species are being used as biofactories of important pharmacological molecules. The use of biofactories does not end there: microorganisms have been explored for the synthesis of diverse chemicals, fuel molecules, and industrial polymers, and strains environmentally important due to their biodecomposing or biosorption capacity have gained interest in research laboratories and in industrial activities. We call this new microbiology Technological Microbiology, and we believe that complex techniques, such as heterologous expression and metabolic engineering, can be increasingly incorporated into this applied science, allowing the generation of new and improved products and services.

  16. Technological Microbiology: Development and Applications

    Science.gov (United States)

    Vitorino, Luciana C.; Bessa, Layara A.

    2017-01-01

    Over thousands of years, modernization could be predicted for the use of microorganisms in the production of foods and beverages. However, the current accelerated pace of new food production is due to the rapid incorporation of biotechnological techniques that allow the rapid identification of new molecules and microorganisms or even the genetic improvement of known species. At no other time in history have microorganisms been so present in areas such as agriculture and medicine, except as recognized villains. Currently, however, beneficial microorganisms such as plant growth promoters and phytopathogen controllers are required by various agricultural crops, and many species are being used as biofactories of important pharmacological molecules. The use of biofactories does not end there: microorganisms have been explored for the synthesis of diverse chemicals, fuel molecules, and industrial polymers, and strains environmentally important due to their biodecomposing or biosorption capacity have gained interest in research laboratories and in industrial activities. We call this new microbiology Technological Microbiology, and we believe that complex techniques, such as heterologous expression and metabolic engineering, can be increasingly incorporated into this applied science, allowing the generation of new and improved products and services. PMID:28539920

  17. Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

    Science.gov (United States)

    Agnew, Donald L.; Jones, Peter A.

    1989-01-01

    A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

  18. Information and Communication Technology for Rural Development

    OpenAIRE

    Ankur Mani Tripathi; Abhishek Kumar Singh; Arvind Kumar

    2012-01-01

    Due to the lack of knowledge and use of ICT in rural areas, development is at a very low rate. Some improvement and advancement in the technologies provided by the government but there is no more effect in the development of rural areas. Information and communication technologies are developing day by day but are lessapplicable in rural areas. Lack of communication and resources are the cause of undeveloped. Main problem are in rural areas are electricity, communication, transportation and la...

  19. Nuclear technology for sustainable development

    International Nuclear Information System (INIS)

    2001-01-01

    Introduces three of the IAEA's current programmes: Promoting food security - use of the sterile insect technique to eradicate the tsetse fly in Sub-Saharan Africa; Managing water resources - use of isotope hydrology to check water for traces of arsenic in Bangladesh; Improving human health - use of nuclear techniques for diagnosis, imaging and cancer treatment in developing countries

  20. Solar cell materials developing technologies

    CERN Document Server

    Conibeer, Gavin J

    2014-01-01

    This book presents a comparison of solar cell materials, including both new materials based on organics, nanostructures and novel inorganics and developments in more traditional photovoltaic materials. It surveys the materials and materials trends in the field including third generation solar cells (multiple energy level cells, thermal approaches and the modification of the solar spectrum) with an eye firmly on low costs, energy efficiency and the use of abundant non-toxic materials.

  1. Development of Nuclear Analytical Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yong Joon; Kim, J. Y.; Sohn, S. C. (and others)

    2007-06-15

    The pre-treatment and handling techniques for the micro-particles in swipe samples were developed for the safeguards purpose. The development of screening technique for the swipe samples has been established using the nuclear fission track method as well as the alpha track method. The laser ablation system to take a nuclear particle present in swipe was designed and constructed for the determination of the enrichment factors for uranium or plutonium, and its performance was tested in atmosphere as well as in vacuum. The optimum conditions for the synthesis of silica based micro-particles were obtained for mass production. The optimum ion exchange resin was selected and the optimum conditions for the uranium adsorption in resin bead technique were established for the development of the enrichment factor for nuclear particles in swipe. The established technique was applied to the swipe taken directly from the nuclear facility and also to the archive samples of IAEA's environmental swipes. The evaluation of dose rate of neutron and secondary gamma-ray for the radiation shields were carried out to design the NIPS system, as well as the evaluation of the thermal neutron concentration effect by the various reflectors. D-D neutron generator was introduced as a neutron source for the NIPS system to have more advantages such as easier control and moderation capability than the {sup 252}Cf source. Simulated samples for explosive and chemical warfare were prepared to construct a prompt gamma-ray database. Based on the constructed database, a computer program for the detection of illicit chemical and nuclear materials was developed using the MATLAB software.

  2. Technology development multidimensional review for engineering and technology managers

    CERN Document Server

    Neshati, Ramin; Watt, Russell; Eastham, James

    2014-01-01

    Developing new products, services, systems, and processes has become an imperative for any firm expecting to thrive in today’s fast-paced and hyper-competitive environment.  This volume integrates academic and practical insights to present fresh perspectives on new product development and innovation, showcasing lessons learned on the technological frontier.  The first part emphasizes decision making.  The second part focuses on technology evaluation, including cost-benefit analysis, material selection, and scenarios. The third part features in-depth case studies to present innovation management tools, such as customer needs identification, technology standardization, and risk management. The fourth part highlights important international trends, such as globalization and outsourcing. Finally the fifth part explores social and political aspects.

  3. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  4. Recent developments in chemical decontamination technology

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.J. [Electric Power Research Institute, Palo Alto, CA (United States)

    1995-03-01

    Chemical decontamination of parts of reactor coolant systems is a mature technology, used routinely in many BWR plants, but less frequently in PWRs. This paper reviews recent developments in the technology - corrosion minimization, waste processing and full system decontamination, including the fuel. Earlier work was described in an extensive review published in 1990.

  5. Readiness for banking technologies in developing countries

    African Journals Online (AJOL)

    Are customers who have a higher perceived desirability of using technological .... low-income people. Hypothesis development. 1Before it is possible to determine the relationship between technology readiness and key demographics ... not possible to draw a random sample of respondents from the target population.

  6. The framework which aims at improving compatibility of the high-level radioactive waste disposal technology with social values and the role of risk communication

    International Nuclear Information System (INIS)

    Sakamoto, Shuichi; Kanda, Keiji

    2002-01-01

    Public perception on safety is the key factor for achieving public acceptance of the high-level radioactive waste (HLW) disposal program. Past studies on public perception and HLW management have confirmed that the public do not share the confidence of the experts in safety and feasibility of HLW disposal. The importance of a more comprehensive approach to enhance acceptability of the HLW disposal technology is recognized. This paper proposes a framework for inducing the implementers and regulators to improve compatibility of the HLW disposal technology with social values. In this framework, the implementers and regulators identify technical components which are subject to substantial influence from public concerns. Then, they manage these components through the following actions: 1) establishing policies, targets and plans to make these components compatible with social values, 2) developing and utilizing the components based on the above policies, targets and plans, 3) checking the extent of compatibility through intensive risk communication and 4) improving the process of developing and utilizing the components. This framework requires information disclosure and evaluation by an independent body which are expected to intensify the incentive to take the above actions. Canada's environmental assessment review process regarding the HLW disposal concept suggests that this framework could work effectively. (author)

  7. The challenges of co-developing a behaviour change app that aimed to make physical activity a habit

    Directory of Open Access Journals (Sweden)

    Alice S Forster

    2016-01-01

    Developers of behaviour change apps must balance the demands of users that will make using the app a habit, while retaining the ingredients necessary for the app to achieve its purpose. Mixed methods provide a rich data set with which to base app development and greater confidence that the app will meet the needs of users in terms of social networking and privacy.

  8. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  9. Energy technology transfer to developing countries

    International Nuclear Information System (INIS)

    Butera, F.; Farinelli, U.

    1992-01-01

    With the use of critical analyses of some examples of technology transfer by industrialized to third world countries, this paper illustrates the importance, in technology transfer, of giving due consideration to the specific social and marketing contexts of the targeted developing country and its physical and financial capability to acquire all the technology necessary to make the total realization of a desired industrial scheme feasible from the economic, technical and social points of view. It also indicates that the most effective transfers are those in which efforts are made to optimize local work force learning levels, process scheme efficiency and cost through the careful integration of innovative with conventional technologies

  10. The Clean Development Mechanism and Technology Transfer

    DEFF Research Database (Denmark)

    Aggarwal, Aradhna

    2017-01-01

    This study assesses the impact of the Clean Development Mechanism (CDM) on the transfer of clean technology in India. The reason this study is unique is because firstly, it adopts an outcome-oriented approach to define ‘technology transfer’, which means that technology transfer occurs if firms...... are able to upgrade their ‘dynamic capabilities’. It uses three indicators of firms’ dynamic capabilities: R&D expenditures to sales ratio, fuel consumption to sales ratio and total factor productivity growth. Secondly, it moves away from the analysis of technology transfer claims made in either Project...

  11. Development of Technology and Installation for Biohydrogen Production

    Science.gov (United States)

    Pridvizhkin, S. V.; Vyguzova, M. A.; Bazhenov, O. V.

    2017-11-01

    The article discusses the method for hydrogen production and the device this method application. The relevance of the use of renewable fuels and the positive impact of renewable energy on the environment and the economy is also considered. The presented technology relates to a method for hydrogen production from organic materials subject to anaerobic fermentation, such as the components of solid municipal waste, sewage sludge and agricultural enterprises wastes, sewage waste. The aim of the research is to develop an effective eco-friendly technology for hydrogen producing within an industrial project To achieve the goal, the following issues have been addressed in the course of the study: - development of the process schemes for hydrogen producing from organic materials; - development of the technology for hydrogen producing; - optimization of a biogas plant with the aim of hydrogen producing at one of the fermentation stages; - approbation of the research results. The article is recommended for engineers and innovators working on the renewable energy development issues.

  12. Mixed Waste Integrated Program emerging technology development

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B. [Oak Ridge National Lab., TN (United States); Hart, P.W. [USDOE, Washington, DC (United States)

    1994-06-01

    The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m{sup 3} of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development`s Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW.

  13. Evaluating the effectiveness of an educational and feedback intervention aimed at improving consideration of sex differences in guideline development

    NARCIS (Netherlands)

    Keuken, D. G.; Haafkens, J. A.; Mohrs, J.; Klazinga, N. S.; Bindels, P. J. E.

    2010-01-01

    Objectives To investigate the effect of an educational and feedback intervention to enhance consideration of sex differences in clinical guideline development. Design Preintervention and postintervention questionnaires in intervention and control groups. Content analysis of intervention guidelines

  14. High-Speed Sealift Technology Development Plan

    National Research Council Canada - National Science Library

    2002-01-01

    .... The purpose of the project was to define the technology investments required to enable development of the high-speed commercial and military ships needed to provide realistic future mission capabilities...

  15. Developing technologies for lunar-based astronomy

    Science.gov (United States)

    Johnson, Stewart W.; Burns, Jack O.; Chua, Koon Meng; Wetzel, John P.

    1992-01-01

    Prospects for lunar-based astronomy and the development of the required technologies are briefly reviewed. A systematic approach to lunar-based astronomy includes a progression in capability from small automated telescopes to the 16-meter reflector on the moon. A next step beyond the 16-meter reflector will be a Lunar Optical/Ultraviolet/Infrared Synthesis Array. Intermediate steps are represented by the Lunar Transit Telescope and the Lunar Cluster Telescope Experiment. Priorities for the required technology development are identified.

  16. Global Nuclear Energy Partnership Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    David J. Hill

    2007-07-01

    This plan describes the GNEP Technology Demonstration Program (GNEP-TDP). It has been prepared to guide the development of integrated plans and budgets for realizing the domestic portion of the GNEP vision as well as providing the basis for developing international cooperation. Beginning with the GNEP overall goals, it describes the basic technical objectives for each element of the program, summarizes the technology status and identifies the areas of greatest technical risk. On this basis a proposed technology demonstration program is described that can deliver the required information for a Secretarial decision in the summer of 2008 and support construction of facilities.

  17. Developing Technological Capabilities in Agro-Industry

    DEFF Research Database (Denmark)

    Whitfield, Lindsay

    2012-01-01

    This article examines the emergence and trajectory of a new agro-industry in Ghana, the pineapple export industry, using the technological capabilities approach. It explains the limited expansion of the industry and its declining competitiveness in the face of new competition by looking at how...... Ghanaian exporters developed technological capabilities initially and the incentives and disincentives to building on those capabilities. The article argues that at the heart of the industry's crisis was an inability to further develop technological capabilities. The crisis had systemic features that have...

  18. Capitalizing on App Development Tools and Technologies

    Science.gov (United States)

    Luterbach, Kenneth J.; Hubbell, Kenneth R.

    2015-01-01

    Instructional developers and others creating apps must choose from a wide variety of app development tools and technologies. Some app development tools have incorporated visual programming features, which enable some drag and drop coding and contextual programming. While those features help novices begin programming with greater ease, questions…

  19. Banking, Technology Workers and Their Career Development.

    Science.gov (United States)

    Armstrong, Lesley; West, Jim

    2001-01-01

    An Australian bank developed a four-stage career development strategy for information technology workers: (1) career coaching sessions with executives; (2) career coaching seminars for line managers and team leaders; (3) staff career planning workshops; and (4) online career development support. The program resulted in increased satisfaction,…

  20. Mixed Waste Integrated Program emerging technology development

    International Nuclear Information System (INIS)

    Berry, J.B.; Hart, P.W.

    1994-01-01

    The US Department of Energy (DOE) is responsible for the management and treatment of its mixed low-level wastes (MLLW). MLLW are regulated under both the Resource Conservation and Recovery Act and various DOE orders. Over the next 5 years, DOE will manage over 1.2 m 3 of MLLW and mixed transuranic (MTRU) wastes. In order to successfully manage and treat these mixed wastes, DOE must adapt and develop characterization, treatment, and disposal technologies which will meet performance criteria, regulatory approvals, and public acceptance. Although technology to treat MLLW is not currently available without modification, DOE is committed to developing such treatment technologies and demonstrating them at the field scale by FY 1997. The Office of Research and Development's Mixed Waste Integrated Program (MWIP) within the DOE Office of Environmental Management (EM), OfFice of Technology Development, is responsible for the development and demonstration of such technologies for MLLW and MTRU wastes. MWIP advocates and sponsors expedited technology development and demonstrations for the treatment of MLLW

  1. Development and Validation of Information Technology Mentor Teacher Attitude Scale: A Pilot Study

    Science.gov (United States)

    Saltan, Fatih

    2015-01-01

    The aim of this study development and validation of a teacher attitude scale toward Information Technology Mentor Teachers (ITMT). ITMTs give technological support to other teachers for integration of technology in their lessons. In the literature, many instruments have been developed to measure teachers' attitudes towards the technological tools…

  2. Coherent Architecture Development as a Basis for Technology Development

    DEFF Research Database (Denmark)

    Ravn, Poul Martin

    coherent architectures in a technology context as a basis for identification of critical development areas, this research has been focused around the following three areas: 1. Product architecture instances for prototypes testing novel technology. 2. Product architecture definition for a sub-system based......The subject of this PhD thesis is architecture-centered design. It elaborates especially on two specific areas: the coherence in architectures in a technology development context and the identification of critical development areas via property-based reasoning, based on an understanding of cette...... coherence. Despite the acceptance and results presented in multiple studies from the application of architectures, the research on architecture work in a technology development context is limited. Technologies are often developed and represented in the form of product sub-systems that are made available...

  3. SMD Technology Development Story for NASA Annual Technology report

    Science.gov (United States)

    Seablom, Michael S.

    2017-01-01

    The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community-including the recommendations set forth in the National Research Council (NRC) decadal surveys-and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions-Heliophysics, Earth Science, Planetary Science, and Astrophysics-develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation-e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

  4. Theoretical Insights for Developing the Concept of Social Technologies

    Directory of Open Access Journals (Sweden)

    Monika Skaržauskaitė

    2012-12-01

    Full Text Available Purpose—Social technologies continue to grow in popularity in society. Even though the term “social technology” is most commonly used to refer to new social media such as Twitter and Facebook, a redefinition of this concept based on the original definition is needed. Nowadays the concept of “social technology” has several aspects, which destabilize the dominant image of technology. It emphasizes the social sciences and the humanities as shapers of society, reconsiders the strength of “soft technologies.” The aim of this paper is to provide rich insight into the concept of social technologies’ and to develop the meaning of social technologies in information and knowledge society by analysing new needs and application forms of social technologies.Findings—the research contributed to the understanding of the concept of social technologies. Based on the analysis and synthesis of the scientific literature, a theoretical framework for defining social technologies was developed.Research limitations/implications—the research is limited in a few aspects. For a deeper understanding of social technologies and for developing technological perspectives in social sciences a broader theoretical, as well as empirical, research is necessary. In order to generalise the research findings, further research should include different dimensions from the perspective of other sciences.

  5. Theoretical Insights for Developing the Concept of Social Technologies

    Directory of Open Access Journals (Sweden)

    Rūta Tamošiūnaitė

    2013-02-01

    Full Text Available Purpose—Social technologies continue to grow in popularity in society. Even though the term “social technology” is most commonly used to refer to new social media such as Twitter and Facebook, a redefinition of this concept based on the original definition is needed. Nowadays the concept of “social technology” has several aspects, which destabilize the dominant image of technology. It emphasizes the social sciences and the humanities as shapers of society, reconsiders the strength of “soft technologies.” The aim of this paper is to provide rich insight into the concept of social technologies’ and to develop the meaning of social technologies in information and knowledge society by analysing new needs and application forms of social technologies. Findings—the research contributed to the understanding of the concept of social technologies. Based on the analysis and synthesis of the scientific literature, a theoretical framework for defining social technologies was developed. Research limitations/implications—the research is limited in a few aspects. For a deeper understanding of social technologies and for developing technological perspectives in social sciences a broader theoretical, as well as empirical, research is necessary. In order to generalise the research findings, further research should include different dimensions from the perspective of other sciences. Article Type: conceptual paper.

  6. Design, development, implementation and evaluation of a purilingual ICALL system for romance languages aimed at advanced learners

    OpenAIRE

    Koller, Thomas

    2007-01-01

    Plurilingual teaching and learning of Romance languages exploits the similarities between these languages to teach them contrastively and to raise the language awareness of the learner. Several European projects have been devoted to plurilingual teaching and learning of Romance languages. The materials developed in these projects do not involve Natural Language Processing (NLP) capabilities and almost exclusively focus on receptive skills. The research goal of my Ph.D. dissertation was th...

  7. Development of ultrasensitive spectroscopic analysis technology

    International Nuclear Information System (INIS)

    Cha, Hyung Ki; Song, K. S.; Kim, D. H.; Yang, K. H.; Jung, E. C.; Jeong, D. Y.; Yi, Y. J.; Lee, S. M.; Hong, K. H.; Han, J. M.; Yoo, B. D.; Rho, S. P.; Yi, J. H.; Park, H. M.; Cha, B. H.; Nam, S. M.; Lee, J. M.

    1997-09-01

    For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. 1) Laser resonance ionization technology, 2) Laser-induced rare isotope detection technology, 3) Laser-induced plasma analysis technology, 4) Microparticle analysis technology by using ion trap, 5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO 2 , SO 2 , etc. (author). 57 refs., 42 figs

  8. Development of ultrasensitive spectroscopic analysis technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyung Ki; Song, K. S.; Kim, D. H.; Yang, K. H.; Jung, E. C.; Jeong, D. Y.; Yi, Y. J.; Lee, S. M.; Hong, K. H.; Han, J. M.; Yoo, B. D.; Rho, S. P.; Yi, J. H.; Park, H. M.; Cha, B. H.; Nam, S. M.; Lee, J. M.

    1997-09-01

    For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. (1) Laser resonance ionization technology, (2) Laser-induced rare isotope detection technology, (3) Laser-induced plasma analysis technology, (4) Microparticle analysis technology by using ion trap, (5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO{sub 2}, SO{sub 2}, etc. (author). 57 refs., 42 figs.

  9. Mechanistic studies aimed at the development of single site metal alkoxide catalysts for the production of polyoxygenates from renewable resources.

    Energy Technology Data Exchange (ETDEWEB)

    Chisholm, Malcolm H. [The Ohio State Univ., Columbus, OH (United States)

    2015-12-15

    The work proposed herein follows on directly from the existing 3 year grant and the request for funding is for 12 months to allow completion of this work and graduation of current students supported by DOE. The three primary projects are as follows. 1.) A comparative study of the reactivity of LMg(OR) (solvent), where L= a β-diiminate or pyrromethene ligand, in the ring-opening of cyclic esters. 2.) The homopolymerization of expoxides, particularly propylene oxide and styrene oxide, and their copolymerizations with carbon dioxide or organic anhydrides to yield polycarbonates or polyesters, respectively. 3.) The development of well-defined bismuth (III) complexes for ring-opening polymerizations that are tolerant of both air and water. In each of these topics special emphasis is placed on developing a detailed mechanistic understanding of the ring-opening event and how this is modified by the employment of specific metal and ligand combinations. This document also provides a report on findings of the past grant period that are not yet in the public domain/published and shows how the proposed work will bring the original project to conclusion.

  10. African languages, and information communication technologies and development

    OpenAIRE

    Dia, Ibrahima Amadou

    2017-01-01

    This study aims to comprehend the intersections between African languages and information communication technologies (ICTs) and African development and the ensuing opportunities and gaps. First, it presents the theoretical model underpinning this article. Second, it analyzes some initiatives aimed at addressing social and economic hardships whilst strengthening the African indigenous languages. Third, it points out the shortcomings in using ICTs devices to mainstream the African languages int...

  11. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  12. Development of leading technology using reactor produced radioisotope

    International Nuclear Information System (INIS)

    Choi, S. J.; Hong, Y. D.; Choi, K. H.

    2011-01-01

    This project aimed to develop radioimmunotherapeutic candidates for cancer targeting, and production technology for high valued RI(Lu-177) and sealed source for medical application. Major scope and contents are as followed. The development of radiotherapeutic candidates for cancer targeting: Screaning of cancer targeting bioactive materials, Synthesis and radiolabeling of cancer targeting bioactive materials, - Preparation of BFCAs - Highly effective radiolabeling with RI: Validation of therapeutic efficacy of candidate radiopharmaceuticals: in vivo visualization, Development of production technology for RI(Lu-177) and sealed source for medical/industrial application: Separation of Lu-177 using by enriched target: Fabrication of radioactive core for P-32 ophthalmic applicator

  13. Research and development and management of technology

    International Nuclear Information System (INIS)

    Kim, Yeong Gil

    1989-04-01

    This book mentions current state of affairs on research and development and prospect : activity of business, field like information and materials, energy and resource, public welfare, general industry technology. It introduces policy on promotion of research and development such as propel of special research and development business, propel strategy for 10 priority tasks, reinforcement of basic research, promotion of information industry and propel for technical development of business.

  14. HUMID AIR TURBINE CYCLE TECHNOLOGY DEVELOPMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Richard Tuthill

    2002-07-18

    The Humid Air Turbine (HAT) Cycle Technology Development Program focused on obtaining HAT cycle combustor technology that will be the foundation of future products. The work carried out under the auspices of the HAT Program built on the extensive low emissions stationary gas turbine work performed in the past by Pratt & Whitney (P&W). This Program is an integral part of technology base development within the Advanced Turbine Systems Program at the Department of Energy (DOE) and its experiments stretched over 5 years. The goal of the project was to fill in technological data gaps in the development of the HAT cycle and identify a combustor configuration that would efficiently burn high moisture, high-pressure gaseous fuels with low emissions. The major emphasis will be on the development of kinetic data, computer modeling, and evaluations of combustor configurations. The Program commenced during the 4th Quarter of 1996 and closed in the 4th Quarter of 2001. It teamed the National Energy Technology Laboratory (NETL) with P&W, the United Technologies Research Center (UTRC), and a subcontractor on-site at UTRC, kraftWork Systems Inc. The execution of the program started with bench-top experiments that were conducted at UTRC for extending kinetic mechanisms to HAT cycle temperature, pressure, and moisture conditions. The fundamental data generated in the bench-top experiments was incorporated into the analytical tools available at P&W to design the fuel injectors and combustors. The NETL then used the hardware to conduct combustion rig experiments to evaluate the performance of the combustion systems at elevated pressure and temperature conditions representative of the HAT cycle. The results were integrated into systems analysis done by kraftWork to verify that sufficient understanding of the technology had been achieved and that large-scale technological application and demonstration could be undertaken as follow-on activity. An optional program extended the

  15. Development of Risk Management Technology/Development of Risk-Informed Application Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Joon Eon; Kim, K. Y.; Ahn, K. I.; Lee, Y. H.; Lim, H. G.; Jung, W. S.; Choi, S. Y.; Han, S. J.; Ha, J. J.; Hwang, M. J.; Park, S. Y.; Yoon, C

    2007-06-15

    This project aims at developing risk-informed application technologies to enhance the safety and economy of nuclear power plant altogether. For this, the Integrated Level 1 and 2 PSA model is developed. In addition, the fire and internal flooding PSA models are improved according to the PSA standard of U.S.A. To solve the issues of domestic PSA model, the best-estimate thermal hydraulic analyses are preformed for the ATWS and LSSB. In order to reduce the uncertainty of PSA, several new PSA technologies are developed: (1) more exact quantification of large fault tree, (2) importance measure including the effects of external PSA. As feasibility studies of Option 2 and 3, the class of 6 systems' SSC are re-classified based on the risk information and the sensitivity analyses is performed for the EDG starting time, respectively. It is also improved that the methodology to identify the vital area of NPP. The research results of this project can be used in the regulatory body and the industry projects for risk-informed applications.

  16. Development of a permanent geological environment model of Kazan city aimed to solve various engineering-geological problems (Russia)

    Science.gov (United States)

    Zharkova, N.; Latypov, A.; Shevelev, A.; Khuzin, I.

    2016-03-01

    The article discusses the composition, structure and operation principles of a digital geological environment model for the urban area located in the valley of a large lowland river (the Volga). The model is implemented in ESRI (ArcView and ArcGis) and MapInfo software environments. The basis of the model is the data on the composition and physical and mechanical properties of soils, the information about ground waters and industrial loads. The model has been used to conduct zoning of soil conditions, groundwater aggressivity to the materials of underground structures. Also, the areas of existing and possible exogenous geological processes (flooding, karst, suffusion, erosion, landslides) have been identified. According to the model, it is offered to evaluate the stability of geological environment to human impact using typification on the soil conditions based on the pre-zoning of water content and the degree of drainage. A new monitoring system of dangerous exogenous geological processes has been developed, the impact of exogenous processes on the residential buildings has been estimated, and, also, the analysis and evaluation of geological risks have been performed. According to the data on the composition, density and water saturation of soils, the stability of the ground bases to a dynamic impact has been estimated.

  17. Advances in Robotic Servicing Technology Development

    Science.gov (United States)

    Gefke, Gardell G.; Janas, Alex; Pellegrino, Joseph; Sammons, Matthew; Reed, Benjamin

    2015-01-01

    NASA's Satellite Servicing Capabilities Office (SSCO) has matured robotic and automation technologies applicable to in-space robotic servicing and robotic exploration over the last six years. This paper presents the progress of technology development activities at the Goddard Space Flight Center Servicing Technology Center and on the ISS, with an emphasis on those occurring in the past year. Highlighted advancements are design reference mission analysis for servicing in low Earth orbit (LEO) and asteroid redirection; delivery of the engineering development unit of the NASA Servicing Arm; an update on International Space Station Robotic Refueling Mission; and status of a comprehensive ground-based space robot technology demonstration expanding in-space robotic servicing capabilities beginning fall 2015.

  18. Fission Surface Power Technology Development Status

    Science.gov (United States)

    Palac, Donald T.; Mason, Lee S.; Houts, Michael G.; Harlow, Scott

    2010-01-01

    Power is a critical consideration in planning exploration of the surfaces of the Moon, Mars, and beyond. Nuclear power is an important option, especially for locations in the solar system where sunlight is limited in availability or intensity. NASA is maintaining the option for fission surface power for the Moon and Mars by developing and demonstrating technology for an affordable fission surface power system. Because affordability drove the determination of the system concept that this technology will make possible, low development and recurring costs result, while required safety standards are maintained. However, an affordable approach to fission surface power also provides the benefits of simplicity, robustness, and conservatism in design. This paper will illuminate the multiplicity of benefits to an affordable approach to fission surface power, and will describe how the foundation for these benefits is being developed and demonstrated in the Exploration Technology Development Program s Fission Surface Power Project.

  19. Trends in Wind Energy Technology Development

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Madsen, Peter Hauge; Tande, John O.

    2011-01-01

    . The development of new and larger turbines to some extent stagnated, and costs even rose due to high demand and rising materials costs. We believe, however – and this is supported by recent trends – that the next decade will be a new period of technology development and further scale-up, leading to more cost-effective....... The huge potential of wind, the rapid development of the technology and the impressive growth of the industry justify the perception that wind energy is changing its role to become the future backbone of a secure global energy supply. Between the mid-1980s, when the wind industry took off, and 2005 wind...... turbine technology has seen rapid development, leading to impressive increases in the size of turbines, with corresponding cost reductions. From 2005 to 2009 the industry’s focus seems to have been on increasing manufacturing capacity, meeting market demand and making wind turbines more reliable...

  20. Technological opportunities and paths of development

    DEFF Research Database (Denmark)

    Plichta, Kirsten

    1993-01-01

    in the industry. 6) It is argued that such paths of incremental improvement at the industry level may be an outcome of a) the dynamics that produce the technological opportunities; b) the institutions that govern decisions and expectations and c) the criteria by which the chooses between different firms...... technological development efforts. 7) The dynamic that produces opportunities for technological development will in part depend on characteristics of the product (e.g., its complexity), the interdependence between the product and production techniques, the diffusion of the product and in part...... the outcome of different firms development effort may also help shape a path at the industry level. This may be because the criteria by which the market selects between the different product may to some extent be anticipated by the developing firms or because the criteria by which the market select betwee...

  1. Developing technology pushed breakthroughs: an empirical study

    Directory of Open Access Journals (Sweden)

    Jari Sarja

    2017-12-01

    Full Text Available Developing a technology push product that brings real novelty to the market is difficult, risky and costly. This case study analyzes success factors defined by the literature. True industrial cases, representing Finnish ICT firms in their early phase after a successful market entry, were researched for the success factor analysis. The whole set of the previously introduced success factors were variably supported, and three new factors arose. Because the technology pushed development processes are risky with high failure rates, the validated success factors are valuable knowledge for the developments intensive firm’s management.

  2. Music, Technology and National Development: Rethinking Some ...

    African Journals Online (AJOL)

    There is equally the tacit acceptance of the importance of the role of technology for music in particular and development in general. This paper examines the background assumptions that set in motion the conference theme, to find out what music can genuinely contribute to national development, given the trajectories which ...

  3. Developing Industrial and Technological Manpower via Technical ...

    African Journals Online (AJOL)

    In line with the assertion, this study identified the mechanisms for developing industrial and technological manpower via TVET for national development. The study was guided with two research questions and one hypothesis. The descriptive survey research design was employed. The sample was made up of 135 TVET ...

  4. New Achievements in Technology Education and Development

    Science.gov (United States)

    Soomro, Safeeullah, Ed.

    2010-01-01

    Since many decades Education Science and Technology has an achieved tremendous recognition and has been applied to variety of disciplines, mainly Curriculum development, methodology to develop e-learning systems and education management. Many efforts have been taken to improve knowledge of students, researchers, educationists in the field of…

  5. Development of coal hydro gasification technology

    International Nuclear Information System (INIS)

    Itoh, Kazuo; Nomura, Kazuo; Asaoka, Yoshikiyo; Kato, Shojiro; Seo, Tomoyuki

    1997-01-01

    Taking a potential future decrease in natural gas supply into consideration, we are looking for a way to secure a stable supply of high quality substitute natural gas made from coal (which occurs abundantly throughout the world) in large volumes at low cost. We are working towards our goal of commercializing coal hydro gasification technology in the 2010's and have started developing elemental technology from FY, 1996 as a part of the governmental new energy program. (au)

  6. Development and evaluation of an intervention aiming to reduce fatigue in airline pilots: design of a randomised controlled trial.

    Science.gov (United States)

    van Drongelen, Alwin; van der Beek, Allard J; Hlobil, Hynek; Smid, Tjabe; Boot, Cécile R L

    2013-08-26

    A considerable percentage of flight crew reports to be fatigued regularly. This is partly caused by irregular and long working hours and the crossing of time zones. It has been shown that persistent fatigue can lead to health problems, impaired performance during work, and a decreased work-private life balance. It is hypothesized that an intervention consisting of tailored advice regarding exposure to daylight, optimising sleep, physical activity, and nutrition will lead to a reduction of fatigue in airline pilots compared to a control group, which receives a minimal intervention with standard available information. The study population will consist of pilots of a large airline company. All pilots who posses a smartphone or tablet, and who are not on sick leave for more than four weeks at the moment of recruitment, will be eligible for participation.In a two-armed randomised controlled trial, participants will be allocated to an intervention group that will receive the tailored advice to optimise exposure to daylight, sleep, physical activity and nutrition, and a control group that will receive standard available information. The intervention will be applied using a smartphone application and a website, and will be tailored on flight- and participant-specific characteristics. The primary outcome of the study is perceived fatigue. Secondary outcomes are need for recovery, duration and quality of sleep, dietary and physical activity behaviours, work-private life balance, general health, and sickness absence. A process evaluation will be conducted as well. Outcomes will be measured at baseline and at three and six months after baseline. This paper describes the development of an intervention for airline pilots, consisting of tailored advice (on exposure to daylight and sleep-, physical activity, and nutrition) applied into a smartphone application. Further, the paper describes the design of the randomised controlled trial evaluating the effect of the intervention on

  7. Development of technologies for utilizing geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.

  8. Wind technology development: Large and small turbines

    Science.gov (United States)

    Thresher, R. W.; Hock, S. M.; Loose, R. R.; Goldman, P.

    1994-12-01

    Wind technology has developed rapidly over the last decade with the design and development of advanced systems with improved performance, higher reliability, and lower costs. During the past several years, substantial gains have been made in wind turbine designs, lowering costs to an average of $0.05/kWh while further technology development is expected to allow the cost to drop below $0.04/kWh by 2000. As a result, wind is expected to be one of the least expensive forms of new electric generation in the next century. This paper will present the technology developments for both utility-scale wind turbines and remote, small-village wind turbines that are currently available or in development. Technology innovations are being adapted for remote and stand-alone power applications with smaller wind turbines. Hybrid power systems using smaller 1 to 50 (kW) wind turbines are being developed for non-grid-connected electrical generation applications. These village power systems typically use wind energy, photovoltaics, battery storage, and conventional diesel generators to power remote communities. Smaller turbines are being explored for application as distributed generation sources on utility grids to supply power during periods of peak demand, avoiding costly upgrades in distribution equipment. New turbine designs now account for turbulence-induced loads, unsteady aerodynamic stall effects, and complex fatigue loads, making use of new technology developments such as advanced airfoils. The new airfoils increase the energy capture, improve the operating efficiency, and reduce the sensitivity of the airfoils to operation roughness. Electronic controls are allowing variable rotor speed operation; while aerodynamic control devices, such as ailerons and flaps, are used to modulate power or stop the rotor in high-speed conditions. These technology trends and future turbine configurations are being sponsored and explored by the U.S. Department of Energy's Wind Energy Program.

  9. Development of industrial ion implantation technology

    International Nuclear Information System (INIS)

    Choi, Byung Ho; Hwang, Churl Kew; Kim, Wan; Jin, Jung Tai; Jung, Ki Sok; Yoon, Su Ho; Shin, Won Churl; Kim, Jong Gook; Han, Jeon Geon; Chung, Ki Hyung

    1994-01-01

    On a cooperation between KAERI, Kurchatov Institute (Russia), and Mirae Co., development of a metal ion implanter and ion implantation technology is performed on a basic idea of popularization and refinement of ion implantation technology applied to the industrial components. The developed implanter is a two beam type: the mass separation line produces several mA of metal ion beams and the non-separation line produces several tens of mA gas ion beams, thus making the synergistic effect possible by the irradiation of beams from both lines. The target is made of a rotating plate of 60cm in radius and can treat various types of industrial components or parts. About 60 kinds of specimens were treated for the development of implantation technology. Two or five times lengthening of longevities were achieved on the PCB drills, razor blades, cutters, and precision dies. (Author)

  10. Development of national safeguards inspection technology

    Energy Technology Data Exchange (ETDEWEB)

    Kwack, Eun Ho; You, Keon Jung; Kim, Jin Su [and others

    1995-12-01

    It is considered that the safeguards trend in the IAEA and international nonproliferation regime is being accelerated toward strengthened safeguards system. In order to effectively respond to the stream as a whole, government has to have a firm policy-intention on nuclear non-proliferation, and supporting stance as to the stream should be taken consistently. Also, technological development satisfying the non-proliferation requirement would be pursued for the establishment of transparency and the enhancement of international confidence. At present, Korea stands at take-off stage in terms of safeguards. Therefore, necessary measures such as arrangement of legal framework, staffing and training of inspection man-power, and purchase of inspection equipment should be taken at the same time for earlier settlement of national safeguards system. In this connection, international cooperation with the share of the inspection results and equipment between the IAEA and TCNC is demanded. In the long term, the development of inspection technology as well as the research of sophisticated technology will have to be pursued. Emphasis should be placed on the regional safeguards system as well. In addition, it is necessary to ensure internationally that nuclear technological development to be planned is development of safeguards technology. (author). 20 tabs., 24 figs., 45 refs.

  11. ISV technology development plan for buried waste

    International Nuclear Information System (INIS)

    Nickelson, D.F.; Callow, R.A.; Luey, J.K.

    1992-07-01

    This report identifies the main technical issues facing the in situ vitrification (ISV) application to buried waste, and presents a plan showing the top-level schedule and projected resources needed to develop and demonstrate the technology for meeting Environmental Restoration Department (ERD) needs. The plan also proposes a model strategy for the technology transfer from the Department of Energy's Office of Technology Development (DOE-OTD) to the Office of Environmental Restoration (DOE-ER) as the technology proceeds from issues resolution (development) to demonstration and remedial readiness. Implementation of the plan would require $34,91 1K in total funding to be spread in the years FY-93 through FY-98. Of this amount, $10,183K is planned to be funded by DOE-OTD through the ISV Integrated Program. The remaining amount, $24,728K, is recommended to be split between the Department of Energy (DOE) Office of Technology Development ($6,670K) and DOE Office of Environmental Restoration ($18,058K)

  12. Validated physical models and parameters of bulk 3C–SiC aiming for credible technology computer aided design (TCAD) simulation

    Science.gov (United States)

    Arvanitopoulos, A.; Lophitis, N.; Gyftakis, K. N.; Perkins, S.; Antoniou, M.

    2017-10-01

    The cubic form of SiC (β- or 3C-) compared to the hexagonal α-SiC polytypes, primarily 4H- and 6H–SiC, has lower growth cost and can be grown heteroepitaxially in large area silicon (Si) wafers which makes it of special interest. This in conjunction with the recently reported growth of improved quality 3C–SiC, make the development of devices an imminent objective. However, the readiness of models that accurately predict the material characteristics, properties and performance is an imperative requirement for attaining the design and optimization of functional devices. The purpose of this study is to provide and validate a comprehensive set of models alongside with their parameters for bulk 3C–SiC. The validation process revealed that the proposed models are in a very good agreement to experimental data and confidence ranges were identified. This is the first piece of work achieving that for 3C–SiC. Considerably, it constitutes the necessary step for finite element method simulations and technology computer aided design.

  13. Development of advanced neutron beam technology

    Energy Technology Data Exchange (ETDEWEB)

    Seong, B. S.; Lee, J. S.; Sim, C. M. (and others)

    2007-06-15

    The purpose of this work is to timely support the national science and technology policy through development of the advanced application techniques for neutron spectrometers, built in the previous project, in order to improve the neutron spectrometer techniques up to the world-class level in both quantity and quality and to reinforce industrial competitiveness. The importance of the research and development (R and D) is as follows: 1. Technological aspects - Development of a high value-added technology through performing the advanced R and D in the broad research areas from basic to applied science and from hard to soft condensed matter using neutron scattering technique. - Achievement of an important role in development of the new technology for the following industries aerospace, defense industry, atomic energy, hydrogen fuel cell etc. by the non-destructive inspection and analysis using neutron radiography. - Development of a system supporting the academic-industry users for the HANARO facility 2. Economical and Industrial Aspects - Essential technology in the industrial application of neutron spectrometer, in the basic and applied research of the diverse materials sciences, and in NT, BT, and IT areas - Broad impact on the economics and the domestic and international collaborative research by using the neutron instruments in the mega-scale research facility, HANARO, that is a unique source of neutron in Korea. 3. Social Aspects - Creating the scientific knowledge and contributing to the advanced industrial society through the neutron beam application - Improving quality of life and building a national consensus on the application of nuclear power by developing the RT fusion technology using the HANARO facility. - Widening the national research area and strengthening the national R and D capability by performing advanced R and D using the HANARO facility.

  14. Development of advanced neutron beam technology

    International Nuclear Information System (INIS)

    Seong, B. S.; Lee, J. S.; Sim, C. M.

    2007-06-01

    The purpose of this work is to timely support the national science and technology policy through development of the advanced application techniques for neutron spectrometers, built in the previous project, in order to improve the neutron spectrometer techniques up to the world-class level in both quantity and quality and to reinforce industrial competitiveness. The importance of the research and development (R and D) is as follows: 1. Technological aspects - Development of a high value-added technology through performing the advanced R and D in the broad research areas from basic to applied science and from hard to soft condensed matter using neutron scattering technique. - Achievement of an important role in development of the new technology for the following industries aerospace, defense industry, atomic energy, hydrogen fuel cell etc. by the non-destructive inspection and analysis using neutron radiography. - Development of a system supporting the academic-industry users for the HANARO facility 2. Economical and Industrial Aspects - Essential technology in the industrial application of neutron spectrometer, in the basic and applied research of the diverse materials sciences, and in NT, BT, and IT areas - Broad impact on the economics and the domestic and international collaborative research by using the neutron instruments in the mega-scale research facility, HANARO, that is a unique source of neutron in Korea. 3. Social Aspects - Creating the scientific knowledge and contributing to the advanced industrial society through the neutron beam application - Improving quality of life and building a national consensus on the application of nuclear power by developing the RT fusion technology using the HANARO facility. - Widening the national research area and strengthening the national R and D capability by performing advanced R and D using the HANARO facility

  15. Using ISS to develop telescope technology

    Science.gov (United States)

    Saenz-Otero, Alvar; Miller, David W.

    2005-08-01

    Future space telescope missions concepts have introduced new technologies such as precision formation flight, optical metrology, and segmented mirrors. These new technologies require demonstration and validation prior to deployment in final missions such as the James Webb Space Telescope, Terrestrial Planet Finder, and Darwin. Ground based demonstrations do not provide the precision necessary to obtain a high level of confidence in the technology; precursor free flyer space missions suffer from the same problems as the final missions. Therefore, this paper proposes the use of the International Space Station as an intermediate research environment where these technologies can be developed, demonstrated, and validated. The ISS provides special resources, such as human presence, communications, power, and a benign atmosphere which directly reduce the major challenges of space technology maturation: risk, complexity, cost, remote operations, and visibility. Successful design of experiments for use aboard the space station, by enabling iterative research and supporting multiple scientists, can further reduce the effects of these challenges of space technology maturation. This paper presents results of five previous MIT Space Systems Laboratory experiments aboard the Space Shuttle, MIR, and the ISS to illustrate successful technology maturation aboard these facilities.

  16. Making technological innovation work for sustainable development.

    Science.gov (United States)

    Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G; Matus, Kira; Moon, Suerie; Murthy, Sharmila L; Clark, William C

    2016-08-30

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset.

  17. Making technological innovation work for sustainable development

    Science.gov (United States)

    Anadon, Laura Diaz; Harley, Alicia G.; Matus, Kira; Moon, Suerie; Murthy, Sharmila L.

    2016-01-01

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset. PMID:27519800

  18. Development of information technology: Ethical dimensions

    Directory of Open Access Journals (Sweden)

    Pećanac Slobodan

    2016-01-01

    Full Text Available Despite disagreements about whether the technology development in general (including information technology is something that is good or bad for the morale of the community and the individual, there is no dispute that this influence exists. Even when negatively affecting morale, these technologies do so only in the presence of other essential factors primarly and above all human intentions that go beyond the moral norms. So, no matter how much we are certain that information technologies themselves are not the main factor of immorality that does not mean that their use that leads to the 'chaos of immorality' should not be prevented. First of all, by strengthening of the moral community. In any case, mankind can not afford the luxury of hesitating when considering ethical questions posed to the fast development of technology and information transfer despite the pressures to shift all responsibility on lawyers and politicians. Certain legislation within the communities is inevitable and no doubt necessary, but solving ethical dilemmas in the field of new media should be left to the moral community and the reasonable judgment of all its members and not the exclusive regulatory powers of government. Defence of the communication ethics through new media is conditioned by the previously achieved results of efforts to defend the basic principles of sociability. Therefore, conscious efforts for establishing a much stronger social moral legally must lead to a reduction of moral chaos in all areas of communication and means of communication and new information technologies.

  19. Development of technologically important crystals and devices

    International Nuclear Information System (INIS)

    Singh, S.G.; Tyagi, M.; Desai, D.G.; Singh, A.K.; Tiwari, Babita; Sen, Shashwati; Chauhan, A.K.; Gadkari, S.C.

    2011-01-01

    Device-grade single crystals of technologically important materials for use as scintillators in nuclear radiation detection, lasers and optical devices are grown in Crystal Technology Section of the Technical Physics Division. The expertise has been developed to establish crystal growth processes and design and fabricate crystal growth equipment. In addition, single crystals of new materials to be used in neutron and gamma detection are also being studied and developed currently. The processing, characterization and testing of devices are carried out using in-house facilities as well as in collaboration with other Divisions. (author)

  20. Development of nuclear equipment qualification technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Heon O; Kim, Wu Hyun; Kim, Jin Wuk; Kim, Jeong Hyun; Lee, Jeong Kyu; Kim, Yong Han; Jeong, Hang Keun [Korea Institute of Machinery and Materials, Taejon (Korea)

    1999-03-01

    In order to enhance testing and evaluation technologies, which is one of the main works of the Chanwon branch of KIMM(Korea Institute of Machinery and Materials), in addition to the present work scope of the testing and evaluation in the industrial facilities such as petroleum and chemical, plants, the qualification technologies of the equipments important to safety used in the key industrial facilities such as nuclear power plants should be localized: Equipments for testing and evaluation is to be set up and the related technologies must be developed. In the first year of this study, of vibration aging qualification technologies of equipments important to safety used in nuclear power plants have been performed. (author). 27 refs., 81 figs., 17 tabs.

  1. Recent Technological Developments and Their Influence

    International Nuclear Information System (INIS)

    Neitzel, U.

    2000-01-01

    At present, medical X ray imaging is undergoing major changes triggered by important technological developments. Because of the widespread availability of powerful computers and recent advances in large-area electronics, digital imaging technologies are about to replace the last stronghold of conventional imaging, the radiographic film. An overview is given of the technological principles of the different digital image receptors and their relative merits. Another area where digital acquisition technology has already penetrated into clinical practice is fluoroscopy. Digital snapshots have virtually replaced the spot film. Grid controlled fluoroscopy allows the radiation pulses and thus the dose to be tailored according to the diagnostic question. Dose reductions of up to 80% are possible without loss of diagnostic information. The decoupling of detection and display in digital systems gives new freedom for optimising the imaging parameters but also requires new and appropriate optimisation strategies with respect to image quality and dose. (author)

  2. Biofloc technology application in aquaculture to support sustainable development goals.

    Science.gov (United States)

    Bossier, Peter; Ekasari, Julie

    2017-09-01

    Biofloc technology (BFT) application offers benefits in improving aquaculture production that could contribute to the achievement of sustainable development goals. This technology could result in higher productivity with less impact to the environment. Furthermore, biofloc systems may be developed and performed in integration with other food production, thus promoting productive integrated systems, aiming at producing more food and feed from the same area of land with fewer input. The biofloc technology is still in its infant stage. A lot more research is needed to optimise the system (in relation to operational parameters) e.g. in relation to nutrient recycling, MAMP production, immunological effects. In addition research findings will need to be communicated to farmers as the implementation of biofloc technology will require upgrading their skills. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

  3. Development of fabrication technology for CANDU advanced fuel -Development of the advanced CANDU technology-

    International Nuclear Information System (INIS)

    Choi, Chang Beom; Kim, Hyeong Soo; Kim, Sang Won; Seok, Ho Cheon; Shim, Ki Seop; Byeon, Taek Sang; Jang, Ho Il; Kim, Sang Sik; Choi, Il Kwon; Cho, Dae Sik; Sheo, Seung Won; Lee, Soo Cheol; Kim, Yoon Hoi; Park, Choon Ho; Jeong, Seong Hoon; Kang, Myeong Soo; Park, Kwang Seok; Oh, Hee Kwan; Jang, Hong Seop; Kim, Yang Kon; Shin, Won Cheol; Lee, Do Yeon; Beon, Yeong Cheol; Lee, Sang Uh; Sho, Dal Yeong; Han, Eun Deok; Kim, Bong Soon; Park, Cheol Joo; Lee, Kyu Am; Yeon, Jin Yeong; Choi, Seok Mo; Shon, Jae Moon

    1994-07-01

    The present study is to develop the advanced CANDU fuel fabrication technologies by means of applying the R and D results and experiences gained from localization of mass production technologies of CANDU fuels. The annual portion of this year study includes following: 1. manufacturing of demo-fuel bundles for out-of-pile testing 2. development of technologies for the fabrication and inspection of advanced fuels 3. design and munufacturing of fuel fabrication facilities 4. performance of fundamental studies related to the development of advanced fuel fabrication technology

  4. Foreign cooperative technology development and transfer

    International Nuclear Information System (INIS)

    Schassburger, R.J.; Robinson, R.A.

    1988-01-01

    It is the policy of the US Department of Energy (DOE) that, in pursuing the development of mined geologic repositories in the United States, the waste isolation program will continue to actively support international cooperation and exchange activities that are judged to be in the best interest of the program and in compliance with the Nuclear Waste Policy Act of 1982, Sec. 223. Because there are common technical issues and because technology development often requires large expenditures of funds and dedication of significant capital resources, it is advantageous to cooperate with foreign organizations carrying out similar activities. The DOE's Office of Civilian Radioactive Waste Management is working on cooperative nuclear waste isolation technology development programs with the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA), Canada's Atomic Energy of Canada, Limited (AECL), Sweden, Switzerland, and the Federal Republic of Germany. This paper describes recent technology results that have been obtained in DOE's foreign cooperative programs. Specific technology development studies are discussed for cooperative efforts with Canada, OECD/NEA, and a natural analog project in Brazil

  5. Development of Laser Application Technology for Stable Isotope Production

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Do Young; Ko, Kwang Hoon; Kwon, Duck Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)] (and others)

    2007-04-15

    Tl-203 is used as a source material to produce Tl-201 radioisotope which is produced in a cyclotron by irradiating the enriched Tl-203 target. Tl-201 is a radiopharmaceutical for SPECT (single photon emission computerized tomography) to diagnose heart diseases and tumors. This Project aim to develop laser application technology to product stable isotopes such as Tl-203, Yb-168, and Yb-176. For this, photoion extraction device, atomic beam generator, dye lasers, and high power IR lasers are developed.

  6. Advanced technology development reducing CO2 emissions

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Sup

    2010-09-15

    Responding to Korean government policies on green growth and global energy/ environmental challenges, SK energy has been developing new technologies to reduce CO2 emissions by 1) CO2 capture and utilization, 2) efficiency improvement, and 3) Li-ion batteries. The paper introduces three advanced technologies developed by SK energy; GreenPol, ACO, and Li-ion battery. Contributing to company vision, a more energy and less CO2, the three technologies are characterized as follows. GreenPol utilizes CO2 as a feedstock for making polymer. Advanced Catalytic Olefin (ACO) reduces CO2 emission by 20% and increase olefin production by 17%. Li-ion Batteries for automotive industries improves CO2 emission.

  7. Developing innovative environmental technologies for DOE needs

    International Nuclear Information System (INIS)

    Devgun, J.S.; Sewell, I.O.; DeGregory, J.

    1995-01-01

    Environmental restoration and waste management activities at US Department of Energy (DOE) facilities are diverse and complex. Contamination at DOE sites and facilities includes radionuclides, chlorinated hydrocarbons, volatile organic compounds, non-aqueous phase liquids, and heavy metals, among others. Soil and groundwater contamination are major areas of concern and DOE has focused very significant efforts in these areas. Relevant technology development activities are being conducted at DOE's own national laboratories, as well as through collaborative efforts with other federal agencies and the private sector. These activities span research and development (R ampersand D) of new concepts and techniques to demonstration and commercialization of mature technologies. Since 1990, DOE has also supported R ampersand D of innovative technologies through interagency agreements with US Environmental Protection Agency (EPA), US Department of Defense, the National Science Foundation, and others

  8. 78 FR 17418 - Rural Health Information Technology Network Development Grant

    Science.gov (United States)

    2013-03-21

    ... Information Technology Network Development Grant AGENCY: Health Resources and Services Administration (HRSA...-competitive replacement award under the Rural Health Information Technology Network Development Grant (RHITND... relinquishing its fiduciary responsibilities for the Rural Health Information Technology Network Development...

  9. Cosmic Origins (COR) Technology Development Program Overview

    Science.gov (United States)

    Werneth, Russell; Pham, B.; Clampin, M.

    2014-01-01

    The Cosmic Origins (COR) Program Office was established in FY11 and resides at the NASA Goddard Space Flight Center (GSFC). The office serves as the implementation arm for the Astrophysics Division at NASA Headquarters for COR Program related matters. We present an overview of the Program’s technology management activities and the Program’s technology development portfolio. We discuss the process for addressing community-provided technology needs and the Technology Management Board (TMB)-vetted prioritization and investment recommendations. This process improves the transparency and relevance of technology investments, provides the community a voice in the process, and leverages the technology investments of external organizations by defining a need and a customer. Goals for the COR Program envisioned by the National Research Council’s (NRC) “New Worlds, New Horizons in Astronomy and Astrophysics” (NWNH) Decadal Survey report includes a 4m-class UV/optical telescope that would conduct imaging and spectroscopy as a post-Hubble observatory with significantly improved sensitivity and capability, a near-term investigation of NASA participation in the Japanese Aerospace Exploration Agency/Institute of Space and Astronautical Science (JAXA/ISAS) Space Infrared Telescope for Cosmology and Astrophysics (SPICA) mission, and future Explorers.

  10. Smallholder agricultural technology development in Soroti district ...

    African Journals Online (AJOL)

    Mo

    Greater involvement of farmers in development and dissemination of agricultural technology is a key component in current reforms of ... its members to engage in demand-driven agricultural services in Soroti district and thereby contributed to the success of .... long training in integrated production and pest management.

  11. Information and Communication Technologies for Development in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project seeks to foster an inclusive knowledge society by building capacity to apply information and communication technology (ICT) to human, social and economic development in the Middle East, specifically Jordan, Lebanon, Palestine (West Bank and Gaza), Syria and Yemen. The project will focus on the areas of ...

  12. Mobile Haptic Technology Development through Artistic Exploration

    DEFF Research Database (Denmark)

    Cuartielles, David; Göransson, Andreas; Olsson, Tony

    2012-01-01

    This paper investigates how artistic explorations can be useful for the development of mobile haptic technology. It presents an alternative framework of design for wearable haptics that contributes to the building of haptic communities outside specialized research contexts. The paper also present...

  13. Developing Pre-service Teachers' Technology Integration ...

    African Journals Online (AJOL)

    Developing Pre-service Teachers' Technology Integration Competencies in Science and Mathematics Teaching: Experiences from Tanzania and Uganda. ... This study investigated the ICT integration practices in pre-service teacher education in the School of Education at Makerere University (College of Education and ...

  14. Constructive Technology Assessment for HIT development

    DEFF Research Database (Denmark)

    Høstgaard, Anna Marie Balling; Bertelsen, Pernille; Petersen, Lone Stub

    2013-01-01

    Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success facto...... during all the phases in the process. Thereby anumber of problems were prevented to occur later on.Thus, the CTA method and its framework are useful for evaluators and project-management in order to facilitate and support successful HIT development.......Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success factor...... in HIT development. A new evaluation methodology, including an analytical framework, has been developed specifically for HIT development: Constructive Technology Assessment (CTA) for HIT. It offers solutions to both the problems associated with summative technology evaluation and a way to involve end...

  15. Current Developments in DETER Cybersecurity Testbed Technology

    Science.gov (United States)

    2015-12-08

    1 Current Developments in DETER Cybersecurity Testbed Technology Terry Benzel1*, Bob Braden*, Ted Faber*, Jelena Mirkovic*, Steve Schwab...fundamentally transformational cybersecurity research methodologies. This paper discusses underlying rationale, together with initial design and...implementation, of key technical concepts that drive these transformations. 1. Introduction The DETER cybersecurity testbed [3] is a dedicated

  16. Strategic alliances in engineering, technology and development

    International Nuclear Information System (INIS)

    Jazrawi, W.

    1991-01-01

    The role of strategic alliances in the development of heavy oil resources, both mineable and in-situ, is discussed. A strategic alliance is defined as a custom designed, long term collaborative working arrangement between two parties to pool, exchange, and integrate their resources to maximize mutual gain. A combination of one or more of the following success factors is seen as contributing to the unlocking of static heavy oil resources: sufficiently high and sustained crude oil prices; strategic intent to pursue heavy oil development regardless of short-term setbacks or economic downturns; technology breakthroughs that can reduce bitumen supply and upgrading costs; and strategic alliances. An idealized model for strategic alliances designed to help develop heavy oil resources is illustrated. The advantages and pitfalls involved in strategic alliances are listed along with the characteristics of viable contract agreements for such alliances. Some examples of strategic alliances in engineering and technology development are presented from Alberta experience. 2 figs., 1 tab

  17. NASA Astrophysics Funds Strategic Technology Development

    Science.gov (United States)

    Seery, Bernard D.; Ganel, Opher; Pham, Bruce

    2016-01-01

    The COR and PCOS Program Offices (POs) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions. For example, the SAT program is expected to fund key technology developments needed to close gaps identified by Science and Technology Definition Teams (STDTs) planned to study several large mission concept studies in preparation for the 2020 Decadal Survey.The POs are guided by the National Research Council's "New Worlds, New Horizons in Astronomy and Astrophysics" Decadal Survey report, NASA's Astrophysics Implementation Plan, and the visionary Astrophysics Roadmap, "Enduring Quests, Daring Visions." Strategic goals include dark energy, gravitational waves, and X-ray observatories. Future missions pursuing these goals include, e.g., US participation in ESA's Euclid, Athena, and L3 missions; Inflation probe; and a large UV/Optical/IR (LUVOIR) telescope.To date, 65 COR and 71 PCOS SAT proposals have been received, of which 15 COR and 22 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2/BICEP3/Keck to measure polarization in the CMB signal; advanced UV reflective coatings implemented on the optics of GOLD and ICON, two heliophysics Explorers; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and

  18. The Development and Initial Testing of the AIM2 Framework to Assess Risk and Strengths in Young People Who Sexually Offend

    Science.gov (United States)

    Griffin, Helen Louise; Beech, Anthony; Print, Bobbie; Bradshaw, Helen; Quayle, Jeremy

    2008-01-01

    This paper describes the AIM2 assessment framework and the process of its development and initial testing. AIM2 is used to assess areas of concerns and strengths of young people. Some preliminary analysis is described, including the correlation of assessment items, their ability to discriminate between cases, their inter-rater reliability and a…

  19. Green technology innovation in a developing country

    Science.gov (United States)

    Treesubsuntorn, Chairat; Dolphen, Rujira; Dhurakit, Prapai; Siswanto, Dian; Thiravetyan, Paitip

    2017-11-01

    Developing countries rapidly grow when green technology, which is referred to as eco-friendly processes or methods, is developed in parallel. Here, some examples of green technology research and development in Thailand will be overviewed. A huge amount of agricultural waste is generated during agricultural processes. Applying these agricultural wastes in order to maximize the benefits for environmental cleanups of water, soil and air has been studied and commercialized. For example: 1) Application of agricultural waste and/or biochar developed from agricultural waste as biological adsorbents for wastewater treatment in some industries, such as textile/dye industries, and printing industries. In addition, this agricultural waste can also be applied in decolorization of sugar syrup from sugar industries; 2) The research on modified biomaterials as adsorbents and packing materials in biofilters would also be presented, and now, pilot scale biofilters have been developed and applied to solve air pollution problems in the field for future commercialization; 3) Some agricultural waste and/or biochar developed from agricultural waste in our laboratory can promote rice growth and improve rice quality via the reduction of Cd uptake and translocation in rice. Phytoremediation technology, in which plants are used to improve the environmental quality in water and air, has also been studied and would be presented. 1) Some species of native Thai plants can effectively remove heavy metals and dye from wastewater. For this research, a constructed wetland for wastewater treatment was developed and applied in a real contaminated site. 2) In air phytoremediation, some plant species harbor highly volatile organic compound (VOC) removal efficiency. In addition, plants do not only absorb organic pollutants, but also they have the innate ability to degrade organic compounds and use them as carbon sources for their growth. In addition, plant growth-promoting (PGP) bacteria inoculation

  20. Development of fuel and energy storage technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Development of fuel cell power plants is intended of high-efficiency power generation using such fuels with less air pollution as natural gas, methanol and coal gas. The closest to commercialization is phosphoric acid fuel cells, and the high in efficiency and rich in fuel diversity is molten carbonate fuel cells. The development is intended to cover a wide scope from solid electrolyte fuel cells to solid polymer electrolyte fuel cells. For new battery power storage systems, development is focused on discrete battery energy storage technologies of fixed type and mobile type (such as electric vehicles). The ceramic gas turbine technology development is purposed for improving thermal efficiency and reducing pollutants. Small-scale gas turbines for cogeneration will also be developed. Development of superconduction power application technologies is intended to serve for efficient and stable power supply by dealing with capacity increase and increase in power distribution distance due to increase in power demand. In the operations to improve the spread and general promotion systems for electric vehicles, load leveling is expected by utilizing and storing nighttime electric power. Descriptions are given also on economical city systems which utilize wide-area energy. 30 figs., 7 tabs.

  1. Development of System Engineering Technology for Nuclear Fuel Cycle

    International Nuclear Information System (INIS)

    Kim, Ho Dong; Kim, Sung Ki; Song, Kee Chan

    2010-04-01

    This report is aims to establish design requirements for constructing mock-up system of pyroprocess by 2011 to realize long-term goal of nuclear energy promotion comprehensive plan, which is construction of engineering scale pyroprocess integrated process demonstration facility. The development of efficient process for spent fuel and establishment of system engineering technology to demonstrate the process are required to develop nuclear energy continuously. The detailed contents of research for these are as follows; - Design of Mock-up facility for demonstrate pyroprocess, Construction, Approval, Trial run, Performance test - Development of nuclear material accountancy technology for unit processes of pyroprocess and design of safeguards system - Remote operation of demonstrating pyroprocess / Development of maintenance technology and equipment - Establishment of transportation system and evaluation of pre-safety for interim storage system - Deriving and implementation of a method to improve nuclear transparency for commercialization proliferation resistance nuclear fuel cycle Spent fuel which is the most important pending problem of nuclear power development would be reduced and recycled by developing the system engineering technology of pyroprocess facility by 2010. This technology would contribute to obtain JD for the use of spent fuel between the ROK-US and to amend the ROK-US Atomic Energy Agreement scheduled in 2014

  2. Technology-Enhanced Learning in Developing Nations: A review

    Directory of Open Access Journals (Sweden)

    Shalni Gulati

    2008-02-01

    Full Text Available Learning ‘using’ technologies has become a global phenomenon. The Internet is often seen as a value-neutral tool that potentially allows individuals to overcome the constraints of traditional elitist spaces and gain unhindered access to learning. It is widely suggested that online technologies can help address issues of educational equity and social exclusion, and open up democratic and accessible educational opportunities. The national governments and non-governmental agencies who fund educational endeavours in developing countries have advocated the use of new technologies to reduce the cost of reaching and educating large numbers of children and adults who are currently missing out on education. This paper presents an overview of the educational developments in open, distance, and technology-facilitated learning that aim to reach the educationally deprived populations of the world. It reveals the challenges encountered by children and adults in developing countries as they attempt to access available educational opportunities. The discussion questions whether, in face of these challenges, developing nations should continue to invest money, time, and effort into e-learning developments. Can technology-enhanced learning help address the poverty, literacy, social, and political problems in developing countries?

  3. Technological advances in precision medicine and drug development.

    Science.gov (United States)

    Maggi, Elaine; Patterson, Nicole E; Montagna, Cristina

    New technologies are rapidly becoming available to expand the arsenal of tools accessible for precision medicine and to support the development of new therapeutics. Advances in liquid biopsies, which analyze cells, DNA, RNA, proteins, or vesicles isolated from the blood, have gained particular interest for their uses in acquiring information reflecting the biology of tumors and metastatic tissues. Through advancements in DNA sequencing that have merged unprecedented accuracy with affordable cost, personalized treatments based on genetic variations are becoming a real possibility. Extraordinary progress has been achieved in the development of biological therapies aimed to even further advance personalized treatments. We provide a summary of current and future applications of blood based liquid biopsies and how new technologies are utilized for the development of biological therapeutic treatments. We discuss current and future sequencing methods with an emphasis on how technological advances will support the progress in the field of precision medicine.

  4. Assessing nano cellulose developments using science and technology indicators

    International Nuclear Information System (INIS)

    Milanez, Douglas Henrique; Amaral, Roniberto Morato do; Faria, Leandro Innocentini Lopes de; Gregolin, Jose Angelo Rodrigues

    2013-01-01

    This research aims to examine scientific and technological trends of developments in nano cellulose based on scientometric and patent indicators obtained from the Science Citation Index and Derwent Innovations Index in 2001-2010. The overall nano cellulose activity indicators were compared to nanotechnology and other selected nano materials. Scientific and technological future developments in nano cellulose were forecasted using extrapolation growth curves and the main countries were also mapped. The results showed that nano cellulose publications and patent documents have increased rapidly over the last five years with an average growth rate higher than that of nanotechnology and fullerene. The USA, Japan, France, Sweden and Finland all played a significant role in nano cellulose development and the extrapolation growth curves suggested that nano cellulose scientific and technological activities are still emerging. Finally, the evidence from this study recommends monitoring nano cellulose S and T advances in the coming years. (author)

  5. Assessing nano cellulose developments using science and technology indicators

    Energy Technology Data Exchange (ETDEWEB)

    Milanez, Douglas Henrique; Amaral, Roniberto Morato do; Faria, Leandro Innocentini Lopes de; Gregolin, Jose Angelo Rodrigues, E-mail: douglasmilanez@yahoo.com.br [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Nucleo de Informacao Tecnologica em Materiais. Dept. de Engenharia de Materiais

    2013-11-01

    This research aims to examine scientific and technological trends of developments in nano cellulose based on scientometric and patent indicators obtained from the Science Citation Index and Derwent Innovations Index in 2001-2010. The overall nano cellulose activity indicators were compared to nanotechnology and other selected nano materials. Scientific and technological future developments in nano cellulose were forecasted using extrapolation growth curves and the main countries were also mapped. The results showed that nano cellulose publications and patent documents have increased rapidly over the last five years with an average growth rate higher than that of nanotechnology and fullerene. The USA, Japan, France, Sweden and Finland all played a significant role in nano cellulose development and the extrapolation growth curves suggested that nano cellulose scientific and technological activities are still emerging. Finally, the evidence from this study recommends monitoring nano cellulose S and T advances in the coming years. (author)

  6. Assessing nanocellulose developments using science and technology indicators

    Directory of Open Access Journals (Sweden)

    Douglas Henrique Milanez

    2013-06-01

    Full Text Available This research aims to examine scientific and technological trends of developments in nanocellulose based on scientometric and patent indicators obtained from the Science Citation Index and Derwent Innovations Index in 2001-2010. The overall nanocellulose activity indicators were compared to nanotechnology and other selected nanomaterials. Scientific and technological future developments in nanocellulose were forecasted using extrapolation growth curves and the main countries were also mapped. The results showed that nanocellulose publications and patent documents have increased rapidly over the last five years with an average growth rate higher than that of nanotechnology and fullerene. The USA, Japan, France, Sweden and Finland all played a significant role in nanocellulose development and the extrapolation growth curves suggested that nanocellulose scientific and technological activities are still emerging. Finally, the evidence from this study recommends monitoring nanocellulose S&T advances in the coming years.

  7. Technology development risk assessment and mixed interests

    International Nuclear Information System (INIS)

    Borrelli, G.; Sartori, S.

    1992-05-01

    The main purpose of this work is to demonstrate by means of a critical analysis of the state-of-the-art in technological and environmental risk analysis and decision making, that risk and environmental management decisions involve heterogeneous groups of social actors, each representing conflicting interests. It is argued that risk analyses should therefore be based on social interaction and communication paradigma, as well as, on a new rational way of thinking concerning the optimum choice of suitable technological development strategies leading towards a publicly acceptable balance between national energy-economic strategic necessities and social and individual perception of risk

  8. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  9. Continuation of Crosscutting Technology Development at Cast

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan

    2012-03-31

    This Final Technical Report describes progress made on the sub-projects awarded in the Cooperative Agreement DE-FC26-05NT42457: Continuation of Crosscutting Technology Development at Center for Advanced Separation Technologies (CAST). The final reports for each sub-project are attached in the appendix. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: a) Solid-solid separation b) Solid-liquid separation c) Chemical/Biological Extraction d) Modeling and Control, and e) Environmental Control.

  10. Technologies in support of CANDU development

    International Nuclear Information System (INIS)

    Turner, C.; Tapping, B.

    2005-01-01

    Atomic Energy of Canada, Ltd. (AECL) has significant research and development (R and D) programs designed to meet the needs of both existing CANDU reactors and new and evolving CANDU plant designs. These R and D programs cover a wide range of technology, from chemistry and materials support through to inspection and life management tools. Emphasis is placed on effective technology development programs for fuel channels, feeders and steam generators to ensure their operation through design life, and beyond. This paper specifically addresses how the R and D has been applied in the production of longer-lived pressure tubes for the most recent CANDU 6 reactors, and how this technology forms the basis for the pressure tubes of the Advanced CANDU Reactor (ACR). Similarly, AECL has developed solutions for other critical components such as calandria tubes, feeder pipe and steam generators. The paper also discusses how the R and D knowledge has been integrated into aging management databases and health monitoring tools. Since 1997, AECL has been working with CANDU utilities on comprehensive and integrated CANDU Plant Life Management (PLiM) programs for successful and reliable plant operation through design life and beyond. AECL has developed and implemented an advanced chemistry monitoring and diagnostic system, called ChemAND which allows on-line access by the operators to current and past chemistry conditions enabling appropriate responses and facilitating planning of shutdown maintenance actions. An equivalent tool for monitoring, trending and diagnosing thermal and mechanical data has also been developed; this tool is called ThermAND. AECL is developing the Maintenance Information, Monitoring, and Control (MIMC) system, which provide information to the user for condition-based decision-making in maintenance. To enable more effective inspections, surveillance and data collection, AECL has developed unique one-off tooling to carry out unanticipated inspection and repair

  11. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scienti c distributed applications [1]. The survey established, arguably for the rst time, the relationship between infrastructure and scienti c distributed applications. It examined well known contributors to the complexity associated with infrastructure, such as inconsistent internal and external interfaces, and demonstrated the correlation with application brittleness. It discussed how infrastructure complexity reinforces the challenges inherent in developing distributed applications.

  12. Development of safety analysis technology for LMR

    International Nuclear Information System (INIS)

    Hahn, Do Hee; Kwon, Y. M.; Suk, S. D.

    2002-05-01

    In the present study, the KALIMER safety analysis has been made for the transients considered in the design concept, hypothetical core disruptive accident (HCDA), and containment performance with the establishment of the design basis. Such analyses have not been possible without the computer code improvement, and the experience attained during this research period must have greatly contributed to the achievement of the self reliance in the domestic technology establishment on the safety analysis areas of the conceptual design. The safety analysis codes have been improved to extend their applicable ranges for detailed conceptual design, and a basic computer code system has been established for HCDA analysis. A code-to-code comparison analysis has been performed as a part of code verification attempt, and the leading edge technology of JNC also has been brought for the technology upgrade. In addition, the research and development on the area of the database establishment has been made for the efficient and systematic project implementation of the conceptual design, through performances on the development of a project scheduling management, integration of the individually developed technology, establishment of the product database, and so on, taking into account coupling of the activities conducted in each specific area

  13. Advanced Materials and Nano technology for Sustainable Energy Development

    International Nuclear Information System (INIS)

    Huo, Z.; Wu, Ch.H.; Zhu, Z.; Zhao, Y.

    2015-01-01

    Energy is the material foundation of human activities and also the single most valuable resource for the production activities of human society. Materials play a pivotal role in advancing technologies that can offer efficient renewable energy solutions for the future. This special issue has been established as an international foremost interdisciplinary forum that aims to publish high quality and original full research articles on all aspects of the study of materials for the deployment of renewable and sustainable energy technologies. The special issue covers experimental and theoretical aspects of materials and prototype devices for sustainable energy conversion, storage, and saving, together with materials needed for renewable energy production. It brings together stake holders from universities, industries, government agents, and businesses that are involved in the invention, design, development, and implementation of sustainable technologies. The research work has already been published in this special issue which discusses comprehensive technologies for wastewater treatment, strategies for controlling gaseous pollutant releases within chemical plant, evaluation of FCC catalysis poisoning mechanism, clean technologies for fossil fuel use, new-type photo catalysis material design with controllable morphology for solar energy conversion, and so forth. These studies describe important, intriguing, and systematic investigations on advanced materials and technologies for dealing with the key technologies and important issues that continue to haunt the global energy industry. They also tie together many aspects of current energy transportation science and technology, exhibiting outstanding industrial insights that have the potential to encourage and stimulate fresh perspectives on challenges, opportunities, and solutions to energy and environmental sustainability

  14. Application of radiation technology in vaccines development.

    Science.gov (United States)

    Seo, Ho Seong

    2015-07-01

    One of the earliest methods used in the manufacture of stable and safe vaccines is the use of chemical and physical treatments to produce inactivated forms of pathogens. Although these types of vaccines have been successful in eliciting specific humoral immune responses to pathogen-associated immunogens, there is a large demand for the development of fast, safe, and effective vaccine manufacturing strategies. Radiation sterilization has been used to develop a variety of vaccine types, because it can eradicate chemical contaminants and penetrate pathogens to destroy nucleic acids without damaging the pathogen surface antigens. Nevertheless, irradiated vaccines have not widely been used at an industrial level because of difficulties obtaining the necessary equipment. Recent successful clinical trials of irradiated vaccines against pathogens and tumors have led to a reevaluation of radiation technology as an alternative method to produce vaccines. In the present article, we review the challenges associated with creating irradiated vaccines and discuss potential strategies for developing vaccines using radiation technology.

  15. Decommissioning Technology Development for Nuclear Research Facilities

    International Nuclear Information System (INIS)

    Lee, K. W.; Kang, Y. A.; Kim, G. H.

    2007-06-01

    It is predicted that the decommissioning of a nuclear power plant would happen in Korea since 2020 but the need of partial decommissioning and decontamination for periodic inspection and life extension still has been on an increasing trend and its domestic market has gradually been extended. Therefore, in this project we developed following several essential technologies as a decommissioning R and D. The measurement technology for in-pipe radioactive contamination was developed for measuring alpha/beta/gamma emitting nuclides simultaneously inside a in-pipe and it was tested into the liquid waste transfer pipe in KRR-2. And the digital mock-up system for KRR-1 and 2 was developed for choosing the best scenarios among several scenarios on the basis of various decommissioning information(schedule, waste volume, cost, etc.) that are from the DMU and the methodology of decommissioning cost estimation was also developed for estimating a research reactor's decommissioning cost and the DMU and the decommissioning cost estimation system were incorporated into the decommissioning information integrated management system. Finally the treatment and management technology of the irradiated graphites that happened after decommissioning KRR-2 was developed in order to treat and manage the irradiated graphites safely

  16. Latest Developments in Nuclear Emulsion Technology

    Science.gov (United States)

    Morishima, Kunihiro

    Nuclear emulsion is high sensitive photographic film used for detection of three-dimensional trajectory of charged particles. These trajectories are recorded as tracks consist of a lot of silver grains. The size of silver grain is about 1 μm, so that nuclear emulsion has submicron three-dimensional spatial resolution, which gives us a few mrad three-dimensional angular resolution. The important technical progress was speed-up of the read-out technique of nuclear emulsions built with optical microscope system. We succeeded in developing a high-speed three-dimensional read-out system named Super Ultra Track Selector (S-UTS) with the operating read-out speed of approximately 50 cm2/h. Nowadays we are developing the nuclear emulsion gel independently in Nagoya University by introducing emulsion gel production machine. Moreover, we are developing nuclear emulsion production technologies (gel production, poring and mass production). In this paper, development of nuclear emulsion technologies for the OPERA experiment, applications by the technologies and current development are described.

  17. Decommissioning Technology Development for Nuclear Research Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K. W.; Kang, Y. A.; Kim, G. H. (and others)

    2007-06-15

    It is predicted that the decommissioning of a nuclear power plant would happen in Korea since 2020 but the need of partial decommissioning and decontamination for periodic inspection and life extension still has been on an increasing trend and its domestic market has gradually been extended. Therefore, in this project we developed following several essential technologies as a decommissioning R and D. The measurement technology for in-pipe radioactive contamination was developed for measuring alpha/beta/gamma emitting nuclides simultaneously inside a in-pipe and it was tested into the liquid waste transfer pipe in KRR-2. And the digital mock-up system for KRR-1 and 2 was developed for choosing the best scenarios among several scenarios on the basis of various decommissioning information(schedule, waste volume, cost, etc.) that are from the DMU and the methodology of decommissioning cost estimation was also developed for estimating a research reactor's decommissioning cost and the DMU and the decommissioning cost estimation system were incorporated into the decommissioning information integrated management system. Finally the treatment and management technology of the irradiated graphites that happened after decommissioning KRR-2 was developed in order to treat and manage the irradiated graphites safely.

  18. Development of laser technology in Poland

    CERN Document Server

    Gajda, J

    2009-01-01

    The paper presents chosen development threads of laser technology and associated branches of optoelectronics in this country. An occasion to summarize the work and show their current status is the 50 th anniversary of construction of the first laser. The first laser in Poland was launched successfully in 1969, almost simultaneously at WAT and PW. Domestic achievements in this area are summarized every three years by Symposium on Laser Technology held traditionally in Swinoujscie. The work carried on in Poland concerns technology of laser materials, construction of new lasers and associated equipment as well as laser applications. Many technical teams participate in laser oriented European structural and framework projects. Ths is an invited paper to present participation of Polish teams in such European projects as EuCARD - European Coordination of Accelerator Research, FLASH - Free ELctron Laser in DESY Hamburg, E-XFEL - European X-Ray FEL, ELI - Extreme Light Infrastructure, and HIPER.

  19. Space solar cell technology development - A perspective

    Science.gov (United States)

    Scott-Monck, J.

    1982-01-01

    The developmental history of photovoltaics is examined as a basis for predicting further advances to the year 2000. Transistor technology was the precursor of solar cell development. Terrestrial cells were modified for space through changes in geometry and size, as well as the use of Ag-Ti contacts and manufacture of a p-type base. The violet cell was produced for Comsat, and involved shallow junctions, new contacts, and an enhanced antireflection coating for better radiation tolerance. The driving force was the desire by private companies to reduce cost and weight for commercial satellite power supplies. Liquid phase epitaxial (LPE) GaAs cells are the latest advancement, having a 4 sq cm area and increased efficiency. GaAs cells are expected to be flight ready in the 1980s. Testing is still necessary to verify production techniques and the resistance to electron and photon damage. Research will continue in CVD cell technology, new panel technology, and ultrathin Si cells.

  20. Development of integrated scenarios to attain the environmental aims of the national sustainability strategy; Entwicklung von integrierten Szenarien zur Erreichung der umweltbezogenen Ziele der Nationalen Nachhaltigkeitsstrategie

    Energy Technology Data Exchange (ETDEWEB)

    Fink, Alexander; Rammig, Hanna [ScMI AG Paderborn (Germany)

    2013-02-15

    The national sustainability strategy (NHS) shall significantly shape the direction of the sustainable development in Germany. It is aim of the project ''Development of integrated scenarios to attain the environmental aims of the national sustainability strategy'' to develop different options, of how to possibly approach the environmental aims of the national sustainability strategy. In a first step external scenarios were developed, which describe the national sustainability strategy. In a first step external scenarios were developed, which describe the external context for the embodiment of sustainability. In a second step, option scenarios which show alternatives for different actor groups were built for the three areas ''Leisure time, living and alimentation''. In a third step the combination of the different external scenarios and internal options has been conducted, how do the different solution areas fit to the external scenarios.

  1. Development of the advanced CANDU technology

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Soo Dong; Min, Byung Joo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Na, Y. H.; Lee, S. Y.; Choi, J. H.; Lee, B. C.; Kim, S. N.; Jo, C. H.; Paik, J. S.; On, M. R.; Park, H. S.; Kim, S. R. [Korea Electric Power Co., Taejon (Korea, Republic of)

    1997-07-01

    The purpose of this study is to develop the advanced design technology to improve safety, operability and economy and to develop and advanced safety evaluation system. More realistic and reasonable methodology and modeling was employed to improve safety margin in containment analysis. Various efforts have been made to verify the CATHENA code which is the major safety analysis code for CANDU PHWR system. Fully computerized prototype ECCS was developed. The feasibility study and conceptual design of the distributed digital control system have been performed as well. The core characteristics of advanced fuel cycle, fuel management and power upgrade have been studied to determine the advanced core. (author). 77 refs., 51 tabs., 108 figs.

  2. Development of neutron science and technology

    International Nuclear Information System (INIS)

    Lee, Ki Hong; Seong, Baik Seok; Lee, Jeong Soo

    2012-04-01

    Using various neutron scattering, imaging, and activation analysis instruments and irradiation facility and capsules, the short-term industrial application and mid and long-term basic science with neutrons was carried out. In this regard, we proposed the utilization of the neutron scattering and diffraction techniques to the study of physical, mechanical material properties in industrial components. The nano magnetic thin film structure study using neutron reflectometry, spin structure and dynamics study using neutron scattering, hydrogen combination structure study using single crystal diffraction were carried out. The triple-axis spectrometer has been installed. Also, a new growth facility of single crystal has been developed to supply crystals for the neutron scattering experiment. We have contributed to the performance enhancement of hydrogen fuel cell by the development of quantitative neutron radiography technology and developed the differential phase imaging technology using silicon grating. To perform precise neutron activation analysis, a Compton suppressed gamma-ray spectroscopy system was installed. Through the analysis of actual samples as well as geological and biological reference materials, performance test was carried out. We built up analytical data base and develope integrated analytical program for INAA/PGAA. The analysis and evaluation technology of the irradiation capsule test in HANARO for the commercial and future nuclear reactor systems was improved

  3. Development of Advanced Ceramic Manufacturing Technology; FINAL

    International Nuclear Information System (INIS)

    Pujari, V.K.

    2001-01-01

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. I n order to achieve these objectives, NAC, a leading U.S. advanced ceramics component manufacturer, assembled a multidisciplinary, vertically integrated team. This team included: a major diesel engine builder, Detroit Diesel Corporation (DDC); a corporate ceramics research division, SGIC's Northboro R and D Center; intelligent processing system developers, BDM Federal/MATSYS; a furnace equipment company, Centorr/Vacuum Industries; a sintering expert, Wittmer Consultants; a production OEM, Deco-Grand; a wheel manufacturer and grinding operation developer, Norton Company's Higgins Grinding Technology Center (HGTC); a ceramic machine shop, Chand Kare Technical Ceramics; and a manufacturing cost consultant, IBIS Associates. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration

  4. Development of safety analysis technology for LMR

    International Nuclear Information System (INIS)

    Lee, Y. B.; Kwon, Y. M.; Suk, S. D.

    2005-03-01

    The MATRA-LMR-FB has been developed internally for the damage prevention as well as the safety assessment during a channel blockage accident and, as a the result, the quality of the code becomes comparable to that developed in the leading countries. For a code-to-code comparison, KAERI could have access to the SASSYS-1 through a bilateral collaboration between KAERI and ANL. The study could bring into the reliability improvements both on the reactivity models in the SSC-K and on the SSC-K prediction capability. It finally leads to the completion of the SSC-K version 1.3 resulting from the qualitative and quantitative code-to-code comparison. The preliminary analysis for a metal fueled LMR could also become possible with the MELT-III and the VENUS-II, which had originally been developed for the HCDA analysis with an oxidized fuel, by developing the relevant models For the development of the safety evaluation technology, the safety limits have been set up, and the analyses of the internal and external channel blockages in an assembly have also been performed. Besides, the more reliable analysis results on the key design concepts could be obtained by way of the methodology improvement resulting from the qualitative and quantitative comparison study. For an efficient and systematic control of the main project, the integration of the developed technologies and the establishment of their data base have been pursued. It has gone through the development of the process control with taking account of interfaces among the sub-projects, the overall coordination of the developed technologies, the data base for the design products, and so on

  5. Office of Technology Development integrated program for development of in situ remediation technologies

    International Nuclear Information System (INIS)

    Peterson, M.

    1992-08-01

    The Department of Energy's Office of Technology Development has instituted an integrated program focused on development of in situ remediation technologies. The development of in situ remediation technologies will focus on five problem groups: buried waste, contaminated soils, contaminated groundwater, containerized wastes and underground detonation sites. The contaminants that will be included in the development program are volatile and non volatile organics, radionuclides, inorganics and highly explosive materials as well as mixtures of these contaminants. The In Situ Remediation Integrated Program (ISR IP) has defined the fiscal year 1993 research and development technology areas for focusing activities, and they are described in this paper. These R ampersand D topical areas include: nonbiological in situ treatment, in situ bioremediation, electrokinetics, and in situ containment

  6. Technology Development for High Efficiency Optical Communications

    Science.gov (United States)

    Farr, William H.

    2012-01-01

    Deep space optical communications is a significantly more challenging operational domain than near Earth space optical communications, primarily due to effects resulting from the vastly increased range between transmitter and receiver. The NASA Game Changing Development Program Deep Space Optical Communications Project is developing four key technologies for the implementation of a high efficiency telecommunications system that will enable greater than 10X the data rate of a state-of-the-art deep space RF system (Ka-band) for similar transceiver mass and power burden on the spacecraft. These technologies are a low mass spacecraft disturbance isolation assembly, a flight qualified photon counting detector array, a high efficiency flight laser amplifier and a high efficiency photon counting detector array for the ground-based receiver.

  7. Data on development of new energy technologies

    Science.gov (United States)

    1994-03-01

    The paper compiles data on the trend of development of new energy technologies into a book. By category, renewable energy is solar energy, wind power generation, geothermal power generation, ocean energy, and biomass. As a category of fuel form conversion, cited are coal liquefaction/gasification, coal gasification combined cycle power generation, and natural gas liquefaction/decarbonization. The other categories are cogeneration by fuel cell and ceramic gas turbine, district heat supply system, power load leveling technology, transportation-use substitution-fuel vehicle, and others (Stirling engine, superconducting power generator, etc.). The data are systematically compiled on essential principles, transition of introduction, objectives of introduction, status of production, cost, development schedule, performance, etc. The paper also deals with the related legislation system, developmental organizations, and a menu for power companies' buying surplus power.

  8. The Plasma Hearth Process Technology Development Project

    International Nuclear Information System (INIS)

    Geimer, R.; Batdorf, J.; Wolfe, P.

    1993-01-01

    The US DOE Office of Technology Development (OTD) is currently evaluating the Plasma Hearth Process (PHP) for potential treatment of several DOE waste types. The PHP is a high-temperature vitrification process that has potential application for a wide range of mixed waste types in both the low-level and transuranic mixed waste categories. The PHP is being tested under both the OTD Mixed Waste Integrated Program and the Buried Waste Integrated Demonstration. Initial testing has been completed on several different surrogate waste forms that are representative of some of the DOE mixed waste streams. Destruction of organic material exceeds that of conventional incineration technologies. The vitrified residual has leaching characteristics comparable to glass formulations produced in the high-level waste program. The first phase of the PHP demonstration project has been successfully completed, and the project is currently beginning a comprehensive second phase of development and testing

  9. Development of Radiation Breeding Technology of Macroalgae

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jongil; Park, J. H.; Song, B. S.; Kim, J. K.; Kim, J. H.; Lee, H. J.; Yang, H. Y.

    2013-01-15

    Macroalgae has been utilized as food material from long time ago, and recently newly recognized as functional materials and the source of bio-fuel. But, the study on the macroalgae is just beginning and the study on radiation effect and radiation breeding technology was not reported. In this study, the effect of radiation on the macroalgae Porphyra was investigated for the development of new mutant strains. Prphyra was successively cultivated in the laboratory chamber with optimized growth condition. Also, the radiation sensitivity of Porphyra was determined. To develop the mutant strain, irradiated Porphyra strains were screened for better growth and higher resistance against oxidative stress. The selected Porphyra was further cultivated in ocean site. Also, several genes from mutant Porphyra was heterologous expressed and studied for its dunctionality. This results can provide mutation technology of macroalgae and further contribute in the activation of fishery industry and national health enhancement.

  10. Thai health technology assessment guideline development.

    Science.gov (United States)

    Teerawattananon, Yot; Chaikledkaew, Usa

    2008-06-01

    Health Technology Assessment (HTA) is a comprehensive form of policy research that provides information on the consequences of the application of health technology. It is used primarily to guide health care resource allocation decisions. In Thailand, there is increasing impetus to use HTA information to allow more explicit and transparent health care priority setting. A previous study indicated that serious attention needed to be given to the quality of reporting and the use of information in the analyses. These problems could be reduced by setting up standard guidelines for conducting HTA to stimulate the provision of standardized, reliable and good quality information for policy makers. Nevertheless, Thailand has not yet set up such guidelines. This may lead to low quality evaluations. Therefore, the objective of this article was to describe the rationale for guideline development, supporting principles, guideline development process, sources of information, and future challenges for HTA.

  11. Development of the centribaric dewatering technology

    Energy Technology Data Exchange (ETDEWEB)

    Keles, S.; Luttrell, G.; Yoon, R.H.; Estes, T.; Schultz, W.; Bethell, P. [Virginia Tech, Blacksburg, VA (United States)

    2010-07-01

    The solid-solid separation processes employed by modern coal preparation plants require large amounts of process water. After cleaning, the unwanted water must be removed from the surfaces of the particles using mechanical dewatering equipment such as filters or centrifuges. Unfortunately, the existing processes that are used to dewater fine particles are inefficient in terms of moisture reduction and/or solids recovery. In light of these problems, a new ultrafine dewatering process called the Centribaric technology has been developed. This novel device combines centrifugation and pressure filtration within one process to substantially reduce moisture over what can be achieved using conventional dewatering systems. This article discusses the evolution of the Centribaric technology from early research through commercial development and presents data from recent laboratory, pilot-plant, and in-plant test programs.

  12. Technology Roadmaps: A guide to development and implementation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    New low-carbon technologies show clear potential for transforming the global energy system, but a key challenge remains: what steps do governments and industry need to take to ensure their development and deployment? Roadmapping, used for decades in technology-intensive industries, is a useful tool to help address complicated issues strategically at the national, regional and global levels. To help turn political statements and analytical work into concrete action, the International Energy Agency (IEA) is developing a series of global roadmaps devoted to low-carbon energy technologies. This guide is aimed at providing countries and companies with the context, information and tools they need to design, manage and implement an effective energy roadmap process.

  13. Technology Development for a Neutrino Astrophysical Observatory

    International Nuclear Information System (INIS)

    Chaloupka, V.; Cole, T.; Crawford, H.J.; He, Y.D.; Jackson, S.; Kleinfelder, S.; Lai, K.W.; Learned, J.; Ling, J.; Liu, D.; Lowder, D.; Moorhead, M.; Morookian, J.M.; Nygren, D.R.; Price, P.B.; Richards, A.; Shapiro, G.; Shen, B.; Smoot, George F.; Stokstad, R.G.; VanDalen, G.; Wilkes, J.; Wright, F.; Young, K.

    1996-01-01

    We propose a set of technology developments relevant to the design of an optimized Cerenkov detector for the study of neutrino interactions of astrophysical interest. Emphasis is placed on signal processing innovations that enhance significantly the quality of primary data. These technical advances, combined with field experience from a follow-on test deployment, are intended to provide a basis for the engineering design for a kilometer-scale Neutrino Astrophysical Observatory

  14. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of

  15. PROJECT OF MAKING GUIDEBOOK TO EMPLOYMENT : Developing a Guidebook for Students of Bachelor of Social Services that Aims to Prepare Students for Challenges of Finnish Labor Market

    OpenAIRE

    Gurung, Kanchan; Riaz, Asmara

    2015-01-01

    Gurung, Kanchan & Riaz, Asmara. Project of Making Guidebook to Employment: Developing a Guidebook for Students of Bachelor of Social Services that Aims to Prepare Students for Challenges of Finnish Labor Market. A Product Thesis. 54 pages. 5 appendices. Language: English. Diaconia University of Applied Sciences, Degree Program in Social Services, Bachelor in Social Services. Autumn 2015. The aim of this report is to elaborate the process, objectives and challenges of producing the g...

  16. The development of nuclear technology transfer

    International Nuclear Information System (INIS)

    Nack-chung Sung

    1987-01-01

    Korea, as a recipient of nuclear technology transfer, has good experience of progressively building up its indigeneous capability of nuclear technology through three stages of technology transfer, namely: technology transfer under the turnkey approach, component approach, and integrated technology transfer with a local prime contractor. Here, each stage of experience of technology transfer, with Korea as a recipient, is presented. (author)

  17. Medically relevant ElectroNeedle technology development.

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Carrie Frances; Thomas, Michael Loren; McClain, Jaime L.; Harper, Jason C.; Achyuthan, Komandoor E.; Ten Eyck, Gregory A.

    2008-11-01

    ElectroNeedles technology was developed as part of an earlier Grand Challenge effort on Bio-Micro Fuel Cell project. During this earlier work, the fabrication of the ElectroNeedles was accomplished along with proof-of-concept work on several electrochemically active analytes such as glucose, quinone and ferricyanide. Additionally, earlier work demonstrated technology potential in the field of immunosensors by specifically detecting Troponin, a cardiac biomarker. The current work focused upon fabrication process reproducibility of the ElectroNeedles and then using the devices to sensitively detect p-cresol, a biomarker for kidney failure or nephrotoxicity. Valuable lessons were learned regarding fabrication assurance and quality. The detection of p-cresol was accomplished by electrochemistry as well as using fluorescence to benchmark ElectroNeedles performance. Results from these studies will serve as a guide for the future fabrication processes involving ElectroNeedles as well as provide the groundwork necessary to expand technology applications. One paper has been accepted for publication acknowledging LDRD funding (K. E. Achyuthan et al, Comb. Chem. & HTS, 2008). We are exploring the scope for a second paper describing the applications potential of this technology.

  18. Development of Reconstitution Technology for Surveillance Specimens

    International Nuclear Information System (INIS)

    Yasushi Atago; Shunichi Hatano; Eiichiro Otsuka

    2002-01-01

    The Japan Power Engineering and Inspection Corporation (JAPEIC) has been carrying out the project titled 'Nuclear Power Plant Integrated Management Technology (PLIM)' consigned by Japanese Ministry of Economy, Trade and Industry (METI) since 1996FY as a 10-years project. As one of the project themes, development of reconstitution technology for reactor pressure vessel (RPV/RV) surveillance specimens, which are installed in RPVs to monitor the neutron irradiation embrittlement on RPV/RV materials, is now on being carried out to deal with the long-term operation of nuclear power plants. The target of this theme is to establish the technical standard for applicability of reconstituted surveillance specimens including the reconstitution of the Charpy specimens and Compact Tension (CT) specimens. With the Charpy specimen reconstitution, application of 10 mm length inserts is used, which enables the conversion of tests from the LT-direction to the TL-direction. This paper presents the basic data from Charpy and CT specimens of RPV materials using the surveillance specimens obtained for un-irradiated materials including the following. 1) Reconstitution Technology of Charpy Specimens. a) The interaction between plastic zone and Heat Affected Zone (HAZ). b) The effects of the possible deviations from the standard specimens for the reconstituted specimens. 2) Reconstitution Technology of CT specimens. a) The correlation between fracture toughness and plastic zone width. Because the project is now in progress, this paper describes the outline of the results obtained as of the end of 2000 FY. (authors)

  19. Nuclear technology centre. Preserving and developing competence and resources

    International Nuclear Information System (INIS)

    Tiren, I.

    1995-01-01

    The Royal Institute of Technology in Stockholm provides one third of Sweden's capacity for engineering studies and technical research at the post-high-school level. Altogether, the institute includes about 8000 students and 900 active postgraduate students and has a staff of nearly 2500. The research activities cover a broad spectrum of the natural sciences and technology, as well as architecture, industrial economics, urban planning, work science and environmental technology. In 1993, a Nuclear Technology Centre was established at the institute. The purpose of this Centre is to stimulate education and research in nuclear technology in order to contribute to the preservation and development of competence in the nuclear field. The formation of the Centre should be regarded as one of several recent initiatives aimed at maintaining a high level of safety and reliability in the operation of nuclear power plants at a time when there are political manoeuvres to phase out nuclear energy in Sweden. The paper summarizes the motives that led to the formation of the Centre, its goals and organization, and its initial activities and results. The paper may be of interest to similar organizations in other countries which are also faced with uncertainties regarding the future of existing nuclear power plants or of current programmes, and which consider that co-operation between the industry and universities is an important factor in ensuring the quality of technological development. (author). 4 refs

  20. Developing Technology Products - A Physicist's Perspective

    Science.gov (United States)

    Burka, Michael

    2014-03-01

    There are many physicists working in the industrial sector. We rarely have the word physicist in our job title; we are far more commonly called engineers or scientists. But, we are physicists, and we succeed because our training in physics has given us the habits of mind and the technical skills that one needs to solve complex technical challenges. This talk will explore the transition from physics research to technology product development using examples from my own career, first as a postdoctoral fellow and research scientist on the LIGO project, and then developing products in the spectroscopy, telecommunications, and medical device industries. Approaches to identifying and pursuing opportunities in industry will be discussed.

  1. Game development and simulation with unreal technology

    CERN Document Server

    Tavakkoli, Alireza

    2015-01-01

    Game Development and Simulation with Unreal Technology explores the use of Unreal Engine 4 (UE4) for the development of real-time digital interactive contents to be used in computerized games or simulations. The engine is considered in three main iterations: from the basic use of the engine to build games and simulation content out of the box, to intermediate design of interactive content by building on the pre-supplied contents from the base engine, and through advanced implementations geared toward a comprehensive understanding of the power of the Unreal Engine. This is one of the first book

  2. Developing Digital Technologies for Undergraduate University Mathematics

    DEFF Research Database (Denmark)

    Triantafyllou, Eva; Timcenko, Olga

    2013-01-01

    adopt a participatory design method, involving collaboration with students and teachers. As a first step in our design, we developed in collaboration with teachers a set of visualization applets using GeoGebra for the “Mathematics for Multimedia Applications” course taught for Media Technology students...... during lectures and exercise time. During these observations we were able to investigate how the applets were used in practice but also to get insight in the challenges that the students face during mathematics learning. These findings together with student feedback inspire the next round of design...... requirements for the development of digital tools that support mathematics teaching and learning at university level....

  3. Development of decontamination, decommissioning and environmental restoration technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Jik; Kwon, H. S.; Kim, G. N. and others

    1999-03-01

    Through the project of 'Development of decontamination, decommissioning and environmental restoration technology', the followings were studied. 1. Development of decontamination and repair technology for nuclear fuel cycle facilities 2. Development of dismantling technology 3. Development of environmental restoration technology. (author)

  4. Development of the advanced CANDU technology -Development of basic technology for HWR design

    International Nuclear Information System (INIS)

    Seok, Ho Cheon; Seok, Soo Dong; Lee, Sang Yong

    1996-07-01

    It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR's that are now being operated or constructed in Korea. It is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 71 tabs., 147 figs., 143 refs. (Author)

  5. Development of the advanced CANDU technology -Development of basic technology for HWR design-

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Hoh Chun; Lee, Sang Yong; Suk, Soo Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR`s that are now being operated or constructed in Korea, it is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, by performing in-depth studies especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 90 figs, 50 tabs, 38 refs. (Author).

  6. Web Development Technology-PHP. How It Is Related To Web Development Technology ASP.NET

    Directory of Open Access Journals (Sweden)

    Manya Sharma

    2015-01-01

    Full Text Available ABSTRACT This paper tells about the technologies used in PHP and how they are related to ASP.NET. The paper begin with the introduction of PHP defining what and how technologies has been used in development of User Complaint Web Application. How thistechnology is related to ASP.NET in features such as implementation functionality validation and proactive behavior involved in validating user input from the browser providing users feedback overall time consumed in development and maintenance.

  7. Fission Surface Power Technology Development Update

    Science.gov (United States)

    Palac, Donald T.; Mason, Lee S.; Houts, Michael G.; Harlow, Scott

    2011-01-01

    Power is a critical consideration in planning exploration of the surfaces of the Moon, Mars, and places beyond. Nuclear power is an important option, especially for locations in the solar system where sunlight is limited or environmental conditions are challenging (e.g., extreme cold, dust storms). NASA and the Department of Energy are maintaining the option for fission surface power for the Moon and Mars by developing and demonstrating technology for a fission surface power system. The Fission Surface Power Systems project has focused on subscale component and subsystem demonstrations to address the feasibility of a low-risk, low-cost approach to space nuclear power for surface missions. Laboratory demonstrations of the liquid metal pump, reactor control drum drive, power conversion, heat rejection, and power management and distribution technologies have validated that the fundamental characteristics and performance of these components and subsystems are consistent with a Fission Surface Power preliminary reference concept. In addition, subscale versions of a non-nuclear reactor simulator, using electric resistance heating in place of the reactor fuel, have been built and operated with liquid metal sodium-potassium and helium/xenon gas heat transfer loops, demonstrating the viability of establishing system-level performance and characteristics of fission surface power technologies without requiring a nuclear reactor. While some component and subsystem testing will continue through 2011 and beyond, the results to date provide sufficient confidence to proceed with system level technology readiness demonstration. To demonstrate the system level readiness of fission surface power in an operationally relevant environment (the primary goal of the Fission Surface Power Systems project), a full scale, 1/4 power Technology Demonstration Unit (TDU) is under development. The TDU will consist of a non-nuclear reactor simulator, a sodium-potassium heat transfer loop, a power

  8. Tracing Impacts of Science and Technology Development

    Science.gov (United States)

    Powell, Jeanne

    2003-03-01

    ATP's Mission and Operations. The ATP partners with industry to accelerate the development of innovative technologies for broad national economic benefit. The program's focus is on co-funding collaborative, multi-disciplinary technologies and enabling technology platforms that appear likely to be commercialized, with private sector funding, once the high technical risks are reduced. Industry-led projects are selected for funding in rigorous competitions on the basis of technical and economic merit. Since 1990, ATP has co-funded 642 projects, with 1,329 participants and another 1,300 subcontractors. Measuring to Mission: Overview of ATP's Evaluation Program. ATP's multi-component evaluation strategy provides measures of progress and performance matched to the stage of project evolution; i.e., for the short-term, from the time of project selection and over the course of the R for the mid-term, as commercial applications are pursued, early products reach the market, and dissemination of knowledge created in the R projects occurs; and for the longer-term, as more fully-developed technologies diffuse across multiple products and industries. The approach is applicable to all public S programs and adaptable to private or university projects ranging from basic research to applied industrial R. Examples of Results. ATP's composite performance rating system assesses ATP's completed projects against multi-faceted performance criteria of Knowledge Creation and Dissemination and Commercialization Progress 2-3 years after the end of ATP-funded R. It generates scores ranging from zero to four stars. Results for ATP's first 50 completed projects show that 16are in the bottom group of zero or one stars. 60the middle group. It is understood that not all ATP projects will be successful given the program's emphasis on funding high-risk technology development that the private sector is unwilling and unable to fund alone. Different technologies have different timelines for

  9. Technology road mapping to guide development planning

    International Nuclear Information System (INIS)

    Goossen, J.E.; Congedo, T.V.

    2004-01-01

    For the past five years, Westinghouse Electric Company, has made ever increasing use of Technology Road Mapping, to direct company development efforts to achieve maximum benefits for our customers and ourselves. Comprised of business units in Nuclear Fuels, Nuclear Services and Nuclear Power Plants, including domestic and international business segments, Westinghouse must pay particular attention to coordinating development to satisfy the diverse needs of our growing international customer base. We must develop products which both benefit the individual Business Unit customer base, and which create synergy to produce the best possible offerings to the broader marketplace. The knowledge we gain through customer contacts and direct customer participation provides the basis from which we develop the Technology Road Map. This Road Map development process can be compared to painting a picture, where the background colors and features correspond to drivers related to the Customer and the prevailing features of the market environment. The subsequent layers of detail include broad Technical Objectives and then specific Technical Goals which will support achieving those objectives. The process is described in detail, and examples are provided. (authors)

  10. Decommissioning technology development for research reactors

    International Nuclear Information System (INIS)

    Lee, K. W.; Kim, S. K.; Kim, Y. K.

    2004-03-01

    Although it is expected that the decommissioning of a nuclear power plant will happen since 2020, the need of partial decommissioning and decontamination for periodic inspection and life extension has been on an increasing trend and domestic market has gradually been extended. Therefore, in this project the decommissioning DB system on the KRR-1 and 2 was developed as establishing the information classification system of the research reactor dismantling and the structural design and optimization of the decommissioning DB system. Also in order to secure the reliability and safety about the dismantling process, the main dismantling simulation technology that can verify the dismantling process before their real dismantling work was developed. And also the underwater cutting equipment was developed to remove these stainless steel parts highly activated from the RSR. First, the its key technologies were developed and then the design, making, and capability analysis were performed. Finally the actual proof was achieved for applying the dismantling site. an automatic surface contamination measuring equipment was developed in order to get the sample automatically and measure the radiation/radioactivity

  11. Nonthermal physical technologies to decontaminate and extend the shelf-life of fruits and vegetables: Trends aiming at quality and safety.

    Science.gov (United States)

    Pinela, José; Ferreira, Isabel C F R

    2017-07-03

    Minimally processed fruits and vegetables are one of the major growing sectors in food industry. This growing demand for healthy and convenient foods with fresh-like properties is accompanied by concerns surrounding efficacy of the available sanitizing methods to appropriately deal with food-borne diseases. In fact, chemical sanitizers do not provide an efficient microbial reduction, besides being perceived negatively by the consumers, dangerous for human health, and harmful to the environment, and the conventional thermal treatments may negatively affect physical, nutritional, or bioactive properties of these perishable foods. For these reasons, the industry is investigating alternative nonthermal physical technologies, namely innovative packaging systems, ionizing and ultraviolet radiation, pulsed light, high-power ultrasound, cold plasma, high hydrostatic pressure, and dense phase carbon dioxide, as well as possible combinations between them or with other preservation factors (hurdles). This review discusses the potential of these novel or emerging technologies for decontamination and shelf-life extension of fresh and minimally processed fruits and vegetables. Advantages, limitations, and challenges related to its use in this sector are also highlighted.

  12. Small Hydropower Research and Development Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blackmore, Mo [Near Space Systems, Inc.

    2013-12-06

    The objective of this work was to investigate, develop, and validate the next generation of small hydroturbine generator designs that maximize the energy transfer from flowing water to electrical power generation. What resulted from this effort was the design of a new technology hydroturbine that Near Space Systems (NSS) has named the Star*Stream© Hydroturbine. Using a design that eliminates nearly all of the shortfalls of conventional hydroturbines, the Star*Stream© Hydroturbine employs a new mechanical-to-electrical energy transfer hydro design that operates without lubrication of any kind, and does not introduce foreign chemicals or particulate matter from oil or drive shaft seal degradation into the hydro ecology. In its unique configuration, the Star*Stream© Hydroturbine is nearly environmentally inert, without the negative aspects caused by interrupting the ecological continuity, i.e., disruptions to sedimentation, water quality, habitat changes, human displacement, fish migration, etc., - while it ensures dramatically reduced timeframes to project completion. While a remarkable reduction in LCOE resulting from application of the Star*Stream© Hydroturbine technology has been the core achievement of the this effort, there have been numerous technological breakthroughs from the development effort.

  13. MHD magnet technology development program summary, September 1982

    Energy Technology Data Exchange (ETDEWEB)

    1983-11-01

    The program of MHD magnet technology development conducted for the US Department of Energy by the Massachusetts Institute of Technology during the past five years is summarized. The general strategy is explained, the various parts of the program are described and the results are discussed. Subjects covered include component analysis, research and development aimed at improving the technology base, preparation of reference designs for commercial-scale magnets with associated design evaluations, manufacturability studies and cost estimations, the detail design and procurement of MHD test facility magnets involving transfer of technology to industry, investigations of accessory subsystem characteristics and magnet-flow-train interfacing considerations and the establishment of tentative recommendations for design standards, quality assurance procedures and safety procedures. A systematic approach (framework) developed to aid in the selection of the most suitable commercial-scale magnet designs is presented and the program status as of September 1982 is reported. Recommendations are made for future work needed to complete the design evaluation and selection process and to provide a sound technological base for the detail design and construction of commercial-scale MHD magnets. 85 references.

  14. MHD magnet technology development program summary, September 1982

    International Nuclear Information System (INIS)

    1983-11-01

    The program of MHD magnet technology development conducted for the US Department of Energy by the Massachusetts Institute of Technology during the past five years is summarized. The general strategy is explained, the various parts of the program are described and the results are discussed. Subjects covered include component analysis, research and development aimed at improving the technology base, preparation of reference designs for commercial-scale magnets with associated design evaluations, manufacturability studies and cost estimations, the detail design and procurement of MHD test facility magnets involving transfer of technology to industry, investigations of accessory subsystem characteristics and magnet-flow-train interfacing considerations and the establishment of tentative recommendations for design standards, quality assurance procedures and safety procedures. A systematic approach (framework) developed to aid in the selection of the most suitable commercial-scale magnet designs is presented and the program status as of September 1982 is reported. Recommendations are made for future work needed to complete the design evaluation and selection process and to provide a sound technological base for the detail design and construction of commercial-scale MHD magnets. 85 references

  15. Mechanisation and automation technologies development in work at construction sites

    Science.gov (United States)

    Sobotka, A.; Pacewicz, K.

    2017-10-01

    Implementing construction work that creates buildings is a very complicated and laborious task and requires the use of various types of machines and equipment. For years there has been a desire for designers and technologists to introduce devices that replace people’s work on machine construction, automation and even robots. Technologies for building construction are still being developed and implemented to limit people’s hard work and improve work efficiency and quality in innovative architectonical and construction solutions. New opportunities for improving work on the construction site include computerisation of technological processes and construction management for projects and processes. The aim of the paper was to analyse the development of mechanisation, automation and computerisation of construction processes and selected building technologies, with special attention paid to 3D printing technology. The state of mechanisation of construction works in Poland and trends in its development in construction technologies are presented. These studies were conducted on the basis of the available literature and a survey of Polish construction companies.

  16. Remote maintenance system technology development for nuclear fuel cycle plants

    International Nuclear Information System (INIS)

    Kashihara, Hidechiyo

    1984-01-01

    The necessity of establishing the technology of remote maintenance, the kinds of maintenance techniques and the change, the image of a facility adopting remote maintenance canyon process, and the outline of the R and D plan to put remote maintenance canyon process in practical use are described. As the objects of development, there are twin arm type servo manipulator system, rack system, remote tube connectors, solution sampling system, inspection system for in-cell equipment, and large plugs for wall penetration. The outline of those are also reported. The development of new remote maintenance technology has been forwarded in the Tokai Works aiming at the application to a glass solidification pilot plant and a FBR fuel recycling test facility. The lowering of the rate of utilization of cells due to poor accessibility and the increase of radiation exposure of workers must be overcome to realize nuclear fuel cycle technology. The maintenance technology is classified into crane canyon method, direct maintenance cell method, remote maintenance cell method and remote maintenance canyon method, and those are described briefly. The development plan of remote maintenance technology is outlined. (Kako, I.)

  17. Fission Surface Power Technology Development Status

    Science.gov (United States)

    Palac, Donald T.; Mason, Lee S.; Harlow, Scott

    2009-01-01

    With the potential future deployment of a lunar outpost there is expected to be a clear need for a high-power, lunar surface power source to support lunar surface operations independent of the day-night cycle, and Fission Surface Power (FSP) is a very effective solution for power levels above a couple 10 s of kWe. FSP is similarly enabling for the poorly illuminated surface of Mars. The power levels/requirements for a lunar outpost option are currently being studied, but it is known that cost is clearly a predominant concern to decision makers. This paper describes the plans of NASA and the DOE to execute an affordable fission surface power system technology development project to demonstrate sufficient technology readiness of an affordable FSP system so viable and cost-effective FSP system options will be available when high power lunar surface system choices are expected to be made in the early 2010s.

  18. Technology development activities supporting tank waste remediation

    International Nuclear Information System (INIS)

    Bonner, W.F.; Beeman, G.H.

    1994-06-01

    This document summarizes work being conducted under the U.S. Department of Energy's Office of Technology Development (EM-50) in support of the Tank Waste Remediation System (TWRS) Program. The specific work activities are organized by the following categories: safety, characterization, retrieval, barriers, pretreatment, low-level waste, and high-level waste. In most cases, the activities presented here were identified as supporting tank remediation by EM-50 integrated program or integrated demonstration lead staff and the selections were further refined by contractor staff. Data sheets were prepared from DOE-HQ guidance to the field issued in September 1993. Activities were included if a significant portion of the work described provides technology potentially needed by TWRS; consequently, not all parts of each description necessarily support tank remediation

  19. Photonics technology development for optical fuzing.

    Energy Technology Data Exchange (ETDEWEB)

    Liu, J.J. (U.S. Army Research Laboratory, Adelphi, MD); Geib, Kent Martin; von der Lippe, C.M. (U.S. Army ARDEC, Adelphi, MD); Peake, Gregory Merwin; Serkland, Darwin Keith; Keeler, Gordon Arthur; Mar, Alan

    2005-07-01

    This paper describes the photonic component development, which exploits pioneering work and unique expertise at Sandia National Laboratories, ARDEC and the Army Research Laboratory by combining key optoelectronic technologies to design and demonstrate components for this fuzing application. The technologies under investigation for the optical fuze design covered in this paper are vertical cavity surface emitting lasers (VECSELs), integrated resonant cavity photodetectors (RCPD), and diffractive micro-optics. The culmination of this work will be low cost, robust, fully integrated, g-hardened components designed suitable for proximity fuzing applications. The use of advanced photonic components will enable replacement of costly assemblies that employ discrete lasers, photodetectors, and bulk optics. The integrated devices will be mass produced and impart huge savings for a variety of Army applications.

  20. Development of Interconnect Technologies for Particle Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, Mani [Univ. of California, Davis, CA (United States)

    2015-01-29

    This final report covers the three years of this grant, for the funding period 9/1/2010 - 8/31/2013. The project consisted of generic detector R&D work at UC Davis, with an emphasis on developing interconnect technologies for applications in HEP. Much of the work is done at our Facility for Interconnect Technologies (FIT) at UC Davis. FIT was established using ARRA funds, with further studies supported by this grant. Besides generic R&D work at UC Davis, FIT is engaged in providing bump bonding help to several DOE supported detector R&D efforts. Some of the developmental work was also supported by funding from other sources: continuing CMS project funds and the Linear Collider R&D funds. The latter program is now terminated. The three year program saw a good deal of progress on several fronts, which are reported here.

  1. Small Orbital Stereo Tracking Camera Technology Development

    Science.gov (United States)

    Gagliano, L.; Bryan, T.; MacLeod, T.

    On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASAs Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well To help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

  2. Multipurpose prevention technologies: products in development.

    Science.gov (United States)

    Friend, David R; Clark, Justin T; Kiser, Patrick F; Clark, Meredith R

    2013-12-01

    Multipurpose prevention technologies (MPTs) are broadly defined as products capable of simultaneously addressing multiple sexual and reproductive health needs including unintended pregnancy, STIs including HIV-1, and other reproductive tract infections. MPTs have been discussed for a few decades but little product development has occurred. With the recent proof-of-concept that a topically applied antiretroviral (ARV) can effectively reduce sexual transmission of HIV-1 (tenofovir 1% gel) the impetus to develop MPTs is gaining momentum. Products currently in development are broadly categorized as either long-acting or on-demand. Long-acting MPTs include intravaginal rings (IVRs) and long-acting injectable products. Several IVR MPTs are under development including one designed to release tenofovir to prevent transmission of HIV-1 and levonorgestrel (LNG) to prevent unintended pregnancy over a 90-day period. Another MPT IVR under development is designed to release the ARV dapivirine and LNG for 2 months. Long-acting injectable pre-exposure prophylaxis (PrEP) formulations of rilpivirine (TMC278) and GSK1265744 have entered clinical evaluation and could form the basis of long-acting injectable products for HIV-1 prevention and prevention of unintended pregnancy. On-demand products include TFV 1% gel (HIV-1/HSV-2 prevention), a zinc/carrageenan zinc gel (HIV-1/HSV-2 prevention), and the SILCS diaphragm administered with TFV 1% gel. Significant technical, funding, and regulatory hurdles must be overcome to develop most MPTs; however, the significant reproductive health benefits to many women around the world should provide motivation to overcome these hurdles. This article is based on a presentation at the "Product Development Workshop 2013: HIV and Multipurpose Prevention Technologies", held in Arlington, Virginia on February 21-22, 2013. It forms part of a special supplement to Antiviral Research. Copyright © 2013. Published by Elsevier B.V.

  3. Development of radioisotope preparation and application technology

    International Nuclear Information System (INIS)

    Han, Hyon Soo; Park, K. B.; Bang, H. S. and others

    2000-04-01

    The purpose of this project is to develop RI production technology utility 'HANARO' and to construct a sound infra-structure for mass production and supply to domestic users. The developed contents and results are as follows: two types of rig for irradiation in reactor core were designed and manufactured. The safety of OR rig during irradiation was identified through various test and it is used for RI production. The prepared IR rig will be used to performance tests for safety. We prepared two welders and welding jigs for production of sealed sources, and equipments for quality control of the welded materials. Production processes and apparatus Cr-51, P-32, I-125 and Sr-89, were developed. Developed results would be used for routine production and supply of radioisotopes. The automatic Tc-99m extraction apparatus was supplied to Libya under IAEA support. For approval on special form radioactive material of the developed Ir-192 source assembly and projector documents were prepared and submitted to MOST. The high dose rate Ir-192 source(diameter 1.1 mm, length 5.2 mm) for RALS and the laser welding system for its fabrication were developed. Production technologies of Ir-192 sources for destructive test and medical therapy were transferred to private company for commercial supply. The chemical immobilization method based on the self-assemble monolayer of ω-functionalized thiol and the sensing scheme based on the beta-emitter labeling method were developed for the fabrication radioimmuno-sensors. Results of this study will be applied to mass production of radioisotopes 'HANARO' and are to contribute the advance of domestic medicine and industry related to radioisotopes

  4. Development of radioisotope preparation and application technology

    Energy Technology Data Exchange (ETDEWEB)

    Han, Hyon Soo; Park, K. B.; Bang, H. S. [and others

    2000-04-01

    The purpose of this project is to develop RI production technology utility 'HANARO' and to construct a sound infra-structure for mass production and supply to domestic users. The developed contents and results are as follows: two types of rig for irradiation in reactor core were designed and manufactured. The safety of OR rig during irradiation was identified through various test and it is used for RI production. The prepared IR rig will be used to performance tests for safety. We prepared two welders and welding jigs for production of sealed sources, and equipments for quality control of the welded materials. Production processes and apparatus Cr-51, P-32, I-125 and Sr-89, were developed. Developed results would be used for routine production and supply of radioisotopes. The automatic Tc-99m extraction apparatus was supplied to Libya under IAEA support. For approval on special form radioactive material of the developed Ir-192 source assembly and projector documents were prepared and submitted to MOST. The high dose rate Ir-192 source(diameter 1.1 mm, length 5.2 mm) for RALS and the laser welding system for its fabrication were developed. Production technologies of Ir-192 sources for destructive test and medical therapy were transferred to private company for commercial supply. The chemical immobilization method based on the self-assemble monolayer of {omega}-functionalized thiol and the sensing scheme based on the beta-emitter labeling method were developed for the fabrication radioimmuno-sensors. Results of this study will be applied to mass production of radioisotopes 'HANARO' and are to contribute the advance of domestic medicine and industry related to radioisotopes.

  5. Development of coated particle fuel technology

    International Nuclear Information System (INIS)

    Cho, Moonsung; Kim, B. G.; Kim, D. J.

    2011-06-01

    Ammonia contacting method for prehardenning the surfaces of ADU liquid droplets and the ageing/washing/drying method and equipment for spherical dried-ADU particles were improved and tested with laboratory sacle. After the improvement of fabrication process, the sphericity of UO 2 kernel obtained to 1.1, and the sintered density and O/U ratio of final UO 2 kernel were above 10.60g/cm 3 . 2.01 respectively. Defects of SiC coating layer could be minimized by optimization of gas flow rate. The fracture strength of SiC layer increased from 450 MPa to 530 MPa by controlling the coating defects. An effort was made to develop the fundamental technology for the fuel element compact for use in High Temperature Gas-cooled Reactor(HTGR) through an establishment of fabrication process, required materials and process equipment as well as performing experiments to identify the basic process conditions and optimize them. Thermal load simulation and verification experiments were carried out for an assesment of the design feasibility of the irradiation rod. Out-of-pile testing of irradiation device such as measurement of pressure drop and vibration, endurance test was performed and the validity of its design was confirmed. A fuel performance analysis code, COPA has been developed to calculate the fuel temperature, the failure fractions of coated fuel particles, the release of fission products. The COPA code can be used to evaluate the performance of the high temperature reactor fuel under the reactor operation, irradiation, heating conditions. KAERI participated in the round robin test of IAEA CRP-6 program to characterize the diameter, sphericity, coating thickness, density and anisotropy of coated particles provided by Korea, USA and South Africa. QC technology was established for TRISO-coated fuel particle. A method for accurate measurement of the optical anisotropy factor for PyC layers of coated particles was developed. Technology and inspection procedures for density

  6. Laser Processed Condensing Heat Exchanger Technology Development

    Science.gov (United States)

    Hansen, Scott; Wright, Sarah; Wallace, Sarah; Hamilton, Tanner; Dennis, Alexander; Zuhlke, Craig; Roth, Nick; Sanders, John

    2017-01-01

    The reliance on non-permanent coatings in Condensing Heat Exchanger (CHX) designs is a significant technical issue to be solved before long-duration spaceflight can occur. Therefore, high reliability CHXs have been identified by the Evolvable Mars Campaign (EMC) as critical technologies needed to move beyond low earth orbit. The Laser Processed Condensing Heat Exchanger project aims to solve these problems through the use of femtosecond laser processed surfaces, which have unique wetting properties and potentially exhibit anti-microbial growth properties. These surfaces were investigated to identify if they would be suitable candidates for a replacement CHX surface. Among the areas researched in this project include microbial growth testing, siloxane flow testing in which laser processed surfaces were exposed to siloxanes in an air stream, and manufacturability.

  7. Status of SOFCo SOFC technology development

    Energy Technology Data Exchange (ETDEWEB)

    Privette, R.; Perna, M.A.; Kneidel, K. [SOFCo, Alliance, OH (United States)] [and others

    1996-12-31

    SOFCo, a Babcock & Wilcox/Ceramatec Research & Development Limited Partnership, is a collaborative research and development venture to develop technologies related to planar, solid-oxide fuel cells (SOFCs). SOFCo has successfully demonstrated a kW-class, solid-oxide fuel cell module operating on pipeline natural gas. The SOFC system design integrates the air preheater and the fuel processor with the fuel cell stacks into a compact test unit; this is the platform for multi-kW modules. The cells, made of tape-cast zirconia electrolyte and conventional electrode materials, exhibit excel lent stability in single-cell tests approaching 40,000 hours of operation. Stack tests using 10-cm and 15-cm cells with ceramic interconnects also show good performance and stability in tests for many thousands of hours.

  8. Development of membrane technology in BARC

    International Nuclear Information System (INIS)

    Misra, B.M.

    2003-01-01

    BARC has been engaged in research and development work on pressure-driven membrane technology from laboratory to pilot plant scale and its commercial scale deployment, for sea and brackish water desalination into potable water, effluent water treatment and water reuse and in various industrial separations including decontamination of radioactive liquid effluents for their safe disposal into the environment. This paper gives a brief description of pressure-driven membrane processes, reverse osmosis, nano filtration, ultrafiltration and micro filtration. Selection of polymeric candidate materials, preparation of semi-permeable membranes and their characterization has been discussed. Various applications of these processes conducted on pilot plant scale have been presented. Large scale deployment of membrane processes for sea water desalination has been indicated. Research and development at BARC has thus resulted in the indigenous development of membrane processes for commercial scale operation. (author)

  9. Current developments in TREAT hodoscope technology

    International Nuclear Information System (INIS)

    De Volpi, A.

    1975-01-01

    The development of fuel motion monitoring is traced from its inception through present operation and into future programs. After noting the role of fuel motion studies in terms of safety assurance for the LMFBR, the history of in-pile fuel monitoring is reviewed. The operational record of the present TREAT fast neutron hodoscope is summarized with attention to various performance features. Development plans for the TREAT hodoscope are described in some detail. Application of the hodoscope has been considered for eight safety facilities other than TREAT. In addition, there is a possible role for fuel monitoring techniques to be extended to real-time ex-vessel core surveillance in operating reactors. Certain intrinsic strengths of the hodoscope technique for material monitoring are identified. The pattern of development may be characterized as an adaptation of several technologies to fit available requirements and resources

  10. Development of environmental radiation control technology

    International Nuclear Information System (INIS)

    Han, M. H.; Kim, E. H.; Keum, D. K.; Kang, M. J.; Jang, B. W.

    2010-04-01

    The objectives of the study are to development of an urban atmospheric dispersion model and data assimilation technique for improving the reliability, to develop the technology for assessing the radiation impact to biota and the surface water transport model, to develop the analytical techniques for the indicator radionuclides on decommissioning of nuclear facilities and nuclear waste disposal sites and to assess of the national environmental radiation impact and establish the optimum management bases of natural radiation. The obtained results might be used; for assessing the radiological effects due to and radiological incident in an urban area, for assessing radiation doses on biota for the environmental protection from ionizing radiation with the application of new concept of the ICP new recommendation, for analyzing the indicator radionuclides on decommissioning of nuclear facilities and nuclear waste disposal sites, and for providing the natural radionuclide database of Korea to international organizations such as UNSCEAR. It can be used for emphasizing relative nuclear safety

  11. Professional Development Aimed at Increasing the Quality of Language Input during Storybook Interactions: Lessons from One Head Start Teacher's Experiences

    Science.gov (United States)

    O'Keefe, Casey

    2018-01-01

    This article provides a review of problems associated with teachers' talk and indicators of higher quality teachers' talk for use with lower socioeconomic status (SES) Head Start students. Then it shows how one Head Start teacher, called Michele in this article, responded to professional development that was aimed at increasing the quality of…

  12. Development of spent fuel remote handling technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, B. S.; Yoon, J. S.; Hong, H. D. (and others)

    2007-02-15

    In this research, the remote handling technology was developed for the ACP application. The ACP gives a possible solution to reduce the rapidly cumulative amount of spent fuels generated from the nuclear power plants in Korea. The remote technologies developed in this work are a slitting device, a voloxidizer, a modified telescopic servo manipulator and a digital mock-up. A slitting device was developed to declad the spent fuel rod-cuts and collect the spent fuel UO{sub 2} pellets. A voloxidizer was developed to convert the spent fuel UO{sub 2} pellets obtained from the slitting process in to U{sub 3}O{sub 8} powder. Experiments were performed to test the capabilities and remote operation of the developed slitting device and voloxidizer by using simulated rod-cuts and fuel in the ACP hot cell. A telescopic servo manipulator was redesigned and manufactured improving the structure of the prototype. This servo manipulator was installed in the ACP hot cell, and the target module for maintenance of the process equipment was selected. The optimal procedures for remote operation were made through the maintenance tests by using the servo manipulator. The ACP digital mockup in a virtual environment was established to secure a reliability and safety of remote operation and maintenance. The simulation for the remote operation and maintenance was implemented and the operability was analyzed. A digital mockup about the preliminary conceptual design of an enginnering-scale ACP was established, and an analysis about a scale of facility and remote handling was accomplished. The real-time diagnostic technique was developed to detect the possible fault accidents of the slitting device. An assessment of radiation effect for various sensors was also conducted in the radiation environment.

  13. Technology Development for Cosmic Microwave Background Cosmology

    Science.gov (United States)

    Munson, Charles D.

    2017-05-01

    The Cosmic Microwave Background (CMB) offers a unique window into the early universe by probing thermal radiation remaining from the big bang. Due to its low temperature and bright foregrounds, its thorough characterization requires technological advancement beyond the current state-of-the-art. In this thesis, I present the development and fabrication of novel metamaterial silicon optics to improve the sensitivity of current and future CMB telescopes. By machining subwavelength features into the silicon surfaces, traditional antireflection coatings can be replaced by all-silicon metamaterials that significantly reduce reflections over previous approaches. I discuss the design of these structured surfaces and the design and construction of a sophisticated fabrication facility necessary to implement this technology on large diameter (30+ cm) lenses for the Atacama Cosmology Telescope Polarization project (ACTPol). I then apply this metamaterial technology to the development of improved free-space filters for millimeter and sub-millimeter wavelength imaging (focusing specifically on blocking infrared radiation, necessary for current cryogenic detector systems). This produces a highly effective infrared-blocking filter, blocking over 99% of the incident power from a 300 K blackbody while maintaining transmission of better than 99% in a target CMB observing band (between 70 and 170 GHz). I conclude with a discussion of the development of a real-space simulation framework to assist in better understanding current CMB results and forecasting for future experiments. By taking a CMB realization and adding to it accurate real-space modeling of the Sunyaev-Zel'dovich effect and weak lensing distortions (introduced by galaxy clusters), a better understanding of the impacts of large scale structure on the CMB can be obtained.

  14. Development of Advanced Ceramic Manufacturing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pujari, V.K.

    2001-04-05

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration. A high-power diesel engine valve for the DDC Series 149 engine was chosen as the demonstration part for this program. This was determined to be an ideal component type to demonstrate cost-effective process enhancements, the beneficial impact of advanced ceramics on transportation systems, and near-term commercialization potential. The baseline valve material was NAC's NT451 SiAION. It was replaced, later in the program, by an alternate silicon nitride composition (NT551), which utilized a lower cost raw material and a simplified powder-processing approach. The material specifications were defined based on DDC's engine requirements, and the initial and final component design tasks were completed.

  15. Developments in rubber technology 2 synthetic rubbers

    CERN Document Server

    Lee, K

    1981-01-01

    This book is intended for those people who have a knowledge or understanding of rubber materials and processes but who wish to update their knowledge. It should be read in conjunction with Developments in Rubber Technology-l as that volume discussed developments in natural rubber and selected special purpose synthetic rubbers as well as additives. The authors have been selected for their expertise in each particular field and we, as editors, would like to express our appreciation to the individual authors and also to their companies. Such a book would be impossible to produce without such active cooperation as we have received. Volumes 1 and 2 of Developments in Rubber Technology cover rubbers which are processed and vulcanised in the traditional manner. It is appreciated that the omission of non-vulcanised rubber materials (the so­ called thermoplastic elastomers) will be unwelcome to many readers but it is intended, because of the size of the subject, to cover these materials in a subsequent volume. A.W. K...

  16. Development of inspection safety evaluation technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Seok Chul; Yoon, Yeo Chang; Kim, Jong Soo; Lee, Tae Young; Kim, Chang Ryol; Lee, Hyung Sub; Kim, Jong Soo

    1995-12-01

    The purpose of this project is to protection nation inspector`s over exposure from radiation that can be occurred by inspection activity at nuclear facilities and its environment, and to ensure the safety of inspection activity at the nuclear facilities. To effectively carry out the domestic inspection task to be enforced from 1996, the evaluation for special radiation exposure rate of nuclear facilities, air and surface contamination level, and measurement and monitoring of water contamination level were made to determine whether these measured values exceeded permissible limitations, and to protect the inspector`s over exposure from radiation at domestic nuclear facilities. Management of inspector`s exposure was carried out under assistance of the Department of Health Physics. Performance tests of two gamma detectors, one neutron detector, alpha and beta detector, and gamma spectroscopy analyzer were carried out to control dose on extremity, the characteristic test for extremity dosimeter was carried out and the theoretical calculation of gamma dose conversion factors based on ANSI N13.32 standard was performed. Under the 93+2 program, IAEA began to recognize the necessity of environmental observation technology development of air-borne particulates travelled from long distance location. Associated with the necessity of this technology development, a proposal of international joint research for development of the special radiation measurement and analysis has been prepared. (author). 21 tabs., 24 figs., 20 refs.

  17. Technology development for high temperature logging tools

    Energy Technology Data Exchange (ETDEWEB)

    Veneruso, A.F.; Coquat, J.A.

    1979-01-01

    A set of prototype, high temperature logging tools (temperature, pressure and flow) were tested successfully to temperatures up to 275/sup 0/C in a Union geothermal well during November 1978 as part of the Geothermal Logging Instrumentation Development Program. This program is being conducted by Sandia Laboratories for the Department of Energy's Division of Geothermal Energy. The progress and plans of this industry based program to develop and apply the high temperature instrumentation technology needed to make reliable geothermal borehole measurements are described. Specifically, this program is upgrading existing sondes for improved high temperature performance, as well as applying new materials (elastomers, polymers, metals and ceramics) and developing component technology such as high temperature cables, cableheads and electronics to make borehole measurements such as formation temperature, flow rate, high resolution pressure and fracture mapping. In order to satisfy critical existing needs, the near term goal is for operation up to 275/sup 0/C and 7000 psi by the end of FY80. The long term goal is for operation up to 350/sup 0/C and 20,000 psi by the end of FY84.

  18. Development of Essential Technology for VHTR

    International Nuclear Information System (INIS)

    Kim, Yong Wan; Koo, G. H.; Kim, D. H.

    2009-04-01

    The research tasks performed in this project can be classified into five categories; high temperature material of VHTR reactor and components for hydrogen production, the nuclear graphite for the core material, the essential technologies for VHTR components, Process Heat Exchanger (PHE) fabrication, and gas loop for PHE verification tests. Research tasks on high temperature materials of VHTR reactor and components include creep properties of super alloy for high temperature components, properties of a modified 9Cr-1Mo alloy, fabrication and properties of in-core ceramic composites, and corrosion properties of the materials for the sulfuric acid decomposer. The technologies of graphitization evaluation, nondestructive defect detection, and impurity analysis were developed in field of nuclear graphites. The properties of graphites were evaluated by tests using small specimen test. The abroad status of graphite machining was reviewed. Review about the status of VHTR components, structural sizing and analysis for hot gas duct, thermal sizing of IHX were performed in the field of the essential technologies for VHTR components. The surface modification process with ion beam mixing was optimized and evaluated for the fabrication of process heat exchanger (PHE). The secondary sulfuric acid loop was designed and constructed in the gas loop. The lab-scale PHE test was performed in the gas loop. In addition, the conceptual design of the mid-size helium loop was performed in the next stage of this project

  19. Wind Energy Workforce Development: Engineering, Science, & Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, George A.; Stewart, Susan W.; Bridgen, Marc

    2013-03-29

    Broadly, this project involved the development and delivery of a new curriculum in wind energy engineering at the Pennsylvania State University; this includes enhancement of the Renewable Energy program at the Pennsylvania College of Technology. The new curricula at Penn State includes addition of wind energy-focused material in more than five existing courses in aerospace engineering, mechanical engineering, engineering science and mechanics and energy engineering, as well as three new online graduate courses. The online graduate courses represent a stand-alone Graduate Certificate in Wind Energy, and provide the core of a Wind Energy Option in an online intercollege professional Masters degree in Renewable Energy and Sustainability Systems. The Pennsylvania College of Technology erected a 10 kilowatt Xzeres wind turbine that is dedicated to educating the renewable energy workforce. The entire construction process was incorporated into the Renewable Energy A.A.S. degree program, the Building Science and Sustainable Design B.S. program, and other construction-related coursework throughout the School of Construction and Design Technologies. Follow-on outcomes include additional non-credit opportunities as well as secondary school career readiness events, community outreach activities, and public awareness postings.

  20. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    OpenAIRE

    Steenhuis, H.J.; de Bruijn, E.J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of developing high technology competencies. This paper analysis the strategies of some developing countries in a particular high technology industry: the aircraft manufacturing industry. The focus is on Brazi...

  1. NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

    Science.gov (United States)

    Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

    2010-01-01

    Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

  2. Development of nuclear fuel cycle technologies

    International Nuclear Information System (INIS)

    Suzuoki, Akira; Matsumoto, Takashi; Suzuki, Kazumichi; Kawamura, Fumio

    1995-01-01

    In the long term plan for atomic energy that the Atomic Energy Commission decided the other day, the necessity of the technical development for establishing full scale fuel cycle for future was emphasized. Hitachi Ltd. has engaged in technical development and facility construction in the fields of uranium enrichment, MOX fuel fabrication, spent fuel reprocessing and so on. In uranium enrichment, it took part in the development of centrifuge process centering around Power Reactor and Nuclear Fuel Development Corporation (PNC), and took its share in the construction of the Rokkasho uranium enrichment plant of Japan Nuclear Fuel Service Co., Ltd. Also it cooperates with Laser Enrichment Technology Research Association. In Mox fuel fabrication, it took part in the construction of the facilities for Monju plutonium fuel production of PNC, for pellet production, fabrication and assembling processes. In spent fuel reprocessing, it cooperated with the technical development of maintenance and repair of Tokai reprocessing plant of PNC, and the construction of spent fuel stores in Rokkasho reprocessing plant is advanced. The centrifuge process and the atomic laser process of uranium enrichment are explained. The high reliability of spent fuel reprocessing plants and the advancement of spent fuel reprocessing process are reported. Hitachi Ltd. Intends to exert efforts for the technical development to establish nuclear fuel cycle which increases the importance hereafter. (K.I.)

  3. Essential technologies for developing human and robot collaborative system

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, Nobuyuki; Suzuki, Katsuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-10-01

    In this study, we aim to develop a concept of new robot system, i.e., `human and robot collaborative system`, for the patrol of nuclear power plants. This paper deals with the two essential technologies developed for the system. One is the autonomous navigation program with human intervention function which is indispensable for human and robot collaboration. The other is the position estimation method by using gyroscope and TV image to make the estimation accuracy much higher for safe navigation. Feasibility of the position estimation method is evaluated by experiment and numerical simulation. (author)

  4. Essential technologies for developing human and robot collaborative system

    International Nuclear Information System (INIS)

    Ishikawa, Nobuyuki; Suzuki, Katsuo

    1997-10-01

    In this study, we aim to develop a concept of new robot system, i.e., 'human and robot collaborative system', for the patrol of nuclear power plants. This paper deals with the two essential technologies developed for the system. One is the autonomous navigation program with human intervention function which is indispensable for human and robot collaboration. The other is the position estimation method by using gyroscope and TV image to make the estimation accuracy much higher for safe navigation. Feasibility of the position estimation method is evaluated by experiment and numerical simulation. (author)

  5. Trends in the development of confectionery technology

    Directory of Open Access Journals (Sweden)

    Z. A. Kanarskaya

    2016-01-01

    Full Text Available Nutrition is one of the main factors that have an enormous impact on the health, performance, creativity, activity and life expectancy, as all essential nutrients enter the body is food. Nutrients are transformed by metabolism in the structural elements of the cell, providing the necessary human plastic material and energy. The traditional source of important nutrients for the human body are the pastries, which are in our population is very popular. However, confectionery products is inherent drawback. Excessive consumption of flour confectionery goods violated balanced diets on nutrients and energy value. This is due to a high fat, carbohydrates, and low enough in some cases, complete absence of fiber, minerals and vitamins. In connection with the formation of the system of healthy nutrition of the population requires the development of production technology of confectionery products with the introduction in their structure of functional ingredients, do not change the organoleptic properties of the product, but can help reduce caloric properties of food and the taste of Tatar national. The purpose of this survey – to identify trends in the development of confectionery technology. This review shows that in confectionery production technology to reduce calories and increase the biological value of the replacement trend in the formulations of wheat flour on chickpeas, flax, triticale, sorghum, rice, barley, corn, bird cherry. It is noted that in the recipes for cakes confectionery introduced from non-traditional raw materials containing dietary fiber. It determined to be a gluten-free medical and functional confectionery products for people with celiac disease.

  6. Technology development needs summary, FY 1995

    International Nuclear Information System (INIS)

    1994-03-01

    Historic activities of DOE during the period of nuclear weapons development, and disposal practices of that time, resulted in the discharge of chemical and radioactive materials to the environment at many DOE facilities and sites. DOE has now focused a major technical effort on mitigating the effects of those discharges through an environmental restoration program. Since this could lead to prohibitive costs if conventional technology is applied for remedial action, a national program will be initiated to develop and demonstrate faster, better, cheaper, and safer means of restoring the DOE sites to conditions that will meet state and federal environment regulations. Key elements of the initiative are the Integrated Programs and Integrated Demonstrations, which work together to identify possible solutions to major environmental problems. Needed statements are given for the following programs: mixed waste landfill, uranium in soils, VOC-arid, decontamination and decommissioning of facilities, buried waste, characterization/monitoring/sensor technology, mixed waste, in situ remediation, efficient separations/processing, minimum additive waste stabilization, supercritical water oxidation. A section on how to get involved is included

  7. Current Status of VHTR Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    David Petti; Hans Gougar; Richard Wright; William Windes; Steve Herring; Richard Schultz; Paul Humrickhouse

    2010-10-01

    Abstract – High Temperature Gas-cooled Reactors (HTGRs) featuring particle fuel reached the stage of commercial deployment in the mid-1980s with the Fort St.Vrain and Thorium HochTemperatur Reaktor feeding electricity to the grids in the United States and West Germany, respectively. The technology was then adopted by Japan and China with the operation of the High Temperature Test Reactor in Oarai, Japan and the High Temperature Reactor (HTR-10) in China. Increasing the outlet temperature of the HTGR to even higher temperatures above 900°C will improve the thermodynamic efficiency of the system and enable application of a new class of gas reactor, the very high temperature reactor, to provide process heat, electricity, and hydrogen to chemical industries with the attendant benefits of improved energy security and reduced CO2 emissions. However, the increase in coolant outlet temperature presents a number of technical challenges associated with fuel, materials, power conversion, and analysis methods for the reactor and hydrogen production. The U.S. Department of Energy is sponsoring a broad program of research and development with a goal of addressing the technical challenges over a broad range of outlet temperatures as part of the Next Generation Nuclear Plant Project. This paper describes the research and development activities that are currently underway to realize the technologies needed for an HTGR that features outlet temperatures of 750 to 950°C.

  8. Technology development needs summary, FY 1995

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    Historic activities of DOE during the period of nuclear weapons development, and disposal practices of that time, resulted in the discharge of chemical and radioactive materials to the environment at many DOE facilities and sites. DOE has now focused a major technical effort on mitigating the effects of those discharges through an environmental restoration program. Since this could lead to prohibitive costs if conventional technology is applied for remedial action, a national program will be initiated to develop and demonstrate faster, better, cheaper, and safer means of restoring the DOE sites to conditions that will meet state and federal environment regulations. Key elements of the initiative are the Integrated Programs and Integrated Demonstrations, which work together to identify possible solutions to major environmental problems. Needed statements are given for the following programs: mixed waste landfill, uranium in soils, VOC-arid, decontamination and decommissioning of facilities, buried waste, characterization/monitoring/sensor technology, mixed waste, in situ remediation, efficient separations/processing, minimum additive waste stabilization, supercritical water oxidation. A section on how to get involved is included.

  9. Photonics technology development for optical fuzing

    Science.gov (United States)

    Geib, K. M.; Serkland, D. K.; Keeler, G. A.; Peake, G. M.; Mar, A.; von der Lippe, C. M.; Liu, J. J.

    2005-09-01

    This paper describes the photonic component development taking place at Sandia National Laboratories, ARDEC and the Army Research Laboratory in support of an effort to develop a robust, compact, and affordable photonic proximity sensor for munitions fuzing applications. Successful implementation of this sensor will provide a new capability for direct fire applications. The technologies under investigation for the optical fuze design covered in this paper are vertical-cavity surface-emitting lasers (VCSELs), vertical-external-cavity surface-emitting lasers (VECSELs), integrated resonant-cavity photodetectors (RCPDs), and refractive micro-optics. The culmination of this work will be low cost, robust, fully integrated, g-hardened components suitable for proximity fuzing applications. The use of advanced photonic components will enable replacement of costly assemblies that employ discrete lasers, photodetectors, and bulk optics. The integrated devices will be mass produced and impart huge savings for a variety of Army applications. The specific application under investigation is for gun-fired munitions. Nevertheless, numerous civilian uses exist for this proximity sensor in automotive, robotics and aerospace applications. This technology is also applicable to robotic ladar and short-range 3-D imaging.

  10. New developments in nuclear medicine technology

    International Nuclear Information System (INIS)

    Ziegler, S.I.; Pichler, B.J.

    2000-01-01

    During the past few years, there have been new impulses in the development of a number of technologies employed in Nuclear Medicine imaging. These include new scintillation materials, the way of detecting the scintillation light, and completely novel methods to detect gamma rays by means of semiconductor detectors. In addition to combined instrumentation that can be used for SPECT and PET, already in clinical use, combined scintigraphic and anatomic imaging devices are now becoming available, for example SPECT/CT or PET/CT. This review article describes the most important of the new components, part of which have already entered product development and part of which are still in the research phase. The review focus on the employment of modern semiconductor detectors in Nuclear Medicine. (orig.) [de

  11. Energy Storage Technology Development for Space Exploration

    Science.gov (United States)

    Mercer, Carolyn R.; Jankovsky, Amy L.; Reid, Concha M.; Miller, Thomas B.; Hoberecht, Mark A.

    2011-01-01

    The National Aeronautics and Space Administration is developing battery and fuel cell technology to meet the expected energy storage needs of human exploration systems. Improving battery performance and safety for human missions enhances a number of exploration systems, including un-tethered extravehicular activity suits and transportation systems including landers and rovers. Similarly, improved fuel cell and electrolyzer systems can reduce mass and increase the reliability of electrical power, oxygen, and water generation for crewed vehicles, depots and outposts. To achieve this, NASA is developing non-flow-through proton-exchange-membrane fuel cell stacks, and electrolyzers coupled with low permeability membranes for high pressure operation. The primary advantage of this technology set is the reduction of ancillary parts in the balance-of-plant fewer pumps, separators and related components should result in fewer failure modes and hence a higher probability of achieving very reliable operation, and reduced parasitic power losses enable smaller reactant tanks and therefore systems with lower mass and volume. Key accomplishments over the past year include the fabrication and testing of several robust, small-scale non-flow-through fuel cell stacks that have demonstrated proof-of-concept. NASA is also developing advanced lithium-ion battery cells, targeting cell-level safety and very high specific energy and energy density. Key accomplishments include the development of silicon composite anodes, lithiatedmixed- metal-oxide cathodes, low-flammability electrolytes, and cell-incorporated safety devices that promise to substantially improve battery performance while providing a high level of safety.

  12. Risk Management for Human Support Technology Development

    Science.gov (United States)

    jones, Harry

    2005-01-01

    NASA requires continuous risk management for all programs and projects. The risk management process identifies risks, analyzes their impact, prioritizes them, develops and carries out plans to mitigate or accept them, tracks risks and mitigation plans, and communicates and documents risk information. Project risk management is driven by the project goal and is performed by the entire team. Risk management begins early in the formulation phase with initial risk identification and development of a risk management plan and continues throughout the project life cycle. This paper describes the risk management approach that is suggested for use in NASA's Human Support Technology Development. The first step in risk management is to identify the detailed technical and programmatic risks specific to a project. Each individual risk should be described in detail. The identified risks are summarized in a complete risk list. Risk analysis provides estimates of the likelihood and the qualitative impact of a risk. The likelihood and impact of the risk are used to define its priority location in the risk matrix. The approaches for responding to risk are either to mitigate it by eliminating or reducing the effect or likelihood of a risk, to accept it with a documented rationale and contingency plan, or to research or monitor the risk, The Human Support Technology Development program includes many projects with independently achievable goals. Each project must do independent risk management, considering all its risks together and trading them against performance, budget, and schedule. Since the program can succeed even if some projects fail, the program risk has a complex dependence on the individual project risks.

  13. Development of forage cryo minced fish technology

    Directory of Open Access Journals (Sweden)

    Titova S. A.

    2017-11-01

    Full Text Available The technology of grinding the frozen fish raw material using the useful model of a piston-type extrusion plant with cold working bodies for fodder minced fish (cryo minced fish feed by the method of cryoextrusion has been developed. The possibility of replacing the standard manufacturing operations (defrosting and subsequent grinding of raw materials to the one (cryoextrusion has been substantiated. The optimal shape of holes of the die for forcing the raw material has been determined in the form of "hourglass", the hole diameter is 7 mm, the length of the process of pushing is 40 s. It has been established that the finished product (cryo minced fish feed has a homogeneous grinding, juicy, crumbly texture, the temperature in the thickness of the product is equal to the temperature of the raw material before processing (–18 °C. The technological scheme of producing the minced fish feed by the method of cryoextrusion has been developed. Researching the chemical composition of fish and feed of mince produced by the traditional and developed methods it has been established that protein content in the cryo minced fish feed remains unchanged. The amino acid composition of cryo minced fish feed has been determined, the amount of essential amino acids is 365.6 mg/g of protein. In the proteins of the cryo minced fish feed methionine has been contained in the minimum quantity (10.0 mg/g protein and in the maximum – serine (155.3 mg/g protein. In the protein of the cryo minced fish feed the only limiting amino acid is methionine. The coefficient of rationality of the cryo minced fish feed whiting is equal to 0.33. The product is not toxic, is not subject to contamination with dangerous microorganisms, has high biological value, contains necessary in animal nutrition mineral elements, the energy value per 100 g of the product is 87 kcal. The combination of the processes of cryoextrusion and lyophilization allows to obtain a new food product with high

  14. The DOE technology development programme on severe accident management

    International Nuclear Information System (INIS)

    Neuhold, R.J.; Moore, R.A.; Theofanous, T.G.

    1998-01-01

    The US Department of Energy (DOE) is sponsoring a programme in technology development aimed at resolving the technical issues in severe accident management strategies for advanced and evolutionary light water reactors (LWRs). The key objective of this effort is to achieve a robust defense-in-depth at the interface between prevention and mitigation of severe accidents. The approach taken towards this goal is based on the Risk Oriented Accident Analysis Methodology (ROAAM). Applications of ROAAM to the severe accident management strategy for the US AP600 advanced LWR have been effective both in enhancing the design and in achieving acceptance of the conclusions and base technology developed in the course of the work. This paper presents an overview of that effort and its key technical elements

  15. Liquid metal reactor development. Development of LMR coolant technology

    Energy Technology Data Exchange (ETDEWEB)

    Nam, H. Y.; Choi, S. K.; Hwang, J. s.; Lee, Y. B.; Choi, B. H.; Kim, J. M.; Kim, Y. G.; Kim, M. J.; Lee, S. D.; Kang, Y. H.; Maeng, Y. Y.; Kim, T. R.; Park, J. H.; Park, S. J.; Cha, J. H.; Kim, D. H.; Oh, S. K.; Park, C. G.; Hong, S. H.; Lee, K. H.; Chun, M. H.; Moon, H. T.; Chang, S. H.; Lee, D. N.

    1997-07-15

    Following studies have been performed during last three years as the 1.2 phase study of the mid and long term nuclear technology development plan. First, the small scale experiments using the sodium have been performed such as the basic turbulent mixing experiment which is related to the design of a compact reactor, the flow reversal characteristics experiment by natural circulation which is necessary for the analysis of local flow reversal when the electromagnetic pump is installed, the feasibility test of the decay heat removal by wall cooling and the operation of electromagnetic pump. Second, the technology of operation mechanism of sodium facility is developed and the technical analysis and fundamental experiments of sodium measuring technology has been performed such as differential pressure measuring experiment, local flow rate measuring experimenter, sodium void fraction measuring experiment, under sodium facility, the free surface movement experiment and the side orifice pressure drop experiment. A new bounded convection scheme was introduced to the ELBO3D thermo-hydraulic computer code designed for analysis of experimental result. A three dimensional computer code was developed for the analysis of free surface movement and the analysis model of transmission of sodium void fraction was developed. Fourth, the small scale key components are developed. The submersible-in-pool type electromagnetic pump which can be used as primary pump in the liquid metal reactor is developed. The SASS which uses the Curie-point electromagnet and the mock-up of Pantograph type IVTM were manufactured and their feasibility was evaluated. Fifth, the high temperature characteristics experiment of stainless steel which is used as a major material for liquid metal reactor and the material characteristics experiment of magnet coil were performed. (author). 126 refs., 98 tabs., 296 figs.

  16. Strategic decision-making for technology implementation in developing countries

    OpenAIRE

    Hipkin, Ian; Bennett, David

    2003-01-01

    Researchers and managers stress the importance of long-term technology strategies to develop technological capabilities for global competitive advantage. This paper explores the relationship between technology decision-making and strategy in technology transfer (TT) in developing countries, with special reference to South Africa. Earlier research by the authors considered technology and operations integration in developing countries and identified factors that were important to managers in th...

  17. The development and application of high throughput cultivation technology in bioprocess development.

    Science.gov (United States)

    Long, Quan; Liu, Xiuxia; Yang, Yankun; Li, Lu; Harvey, Linda; McNeil, Brian; Bai, Zhonghu

    2014-12-20

    This review focuses on recent progress in the technology of high throughput (HTP) cultivation and its increasing application in quality by design (QbD) -driven bioprocess development. Several practical HTP strategies aimed at shortening process development (PD) timelines from DNA to large scale processes involving commercially available HTP technology platforms, including microtiter plate (MTP) culture, micro-scale bioreactors, and in parallel fermentation systems, etc., are critically reviewed in detail. This discussion focuses upon the relative strengths and weaknesses or limitations of each of these platforms in this context. Emerging prototypes of micro-bioreactors reported recently, such as milliliter (mL) scale stirred tank bioreactors, and microfludics integrated micro-scale bioreactors, and their potential for practical application in QbD-driven HTP process development are also critically appraised. The overall aim of such technology is to rapidly gain process insights, and since the analytical technology deployed in HTP systems is critically important to the achievement of this aim, this rapidly developing area is discussed. Finally, general future trends are critically reviewed. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Development of IT-based data communication network technology

    International Nuclear Information System (INIS)

    Hong, Seok Boong; Jeong, K. I.; Yoo, Y. R.

    2010-10-01

    - Developing broadband high-reliability real-time communications technology for NPP - Developing reliability and performance validation technology for communications network - Developing security technology for NPP communications network - Developing field communications network for harsh environment of NPP - International standard registration(Oct. 28, 2009, IEC 61500

  19. User Interface Technology for Formal Specification Development

    Science.gov (United States)

    Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

    1994-01-01

    Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

  20. Development of conformal respirator monitoring technology

    International Nuclear Information System (INIS)

    Shonka, J.J.; Weismann, J.J.; Logan, R.J.

    1997-04-01

    This report summarizes the results of a Small Business Innovative Research Phase II project to develop a modular, surface conforming respirator monitor to improve upon the manual survey techniques presently used by the nuclear industry. Research was performed with plastic scintillator and gas proportional modules in an effort to find the most conducive geometry for a surface conformal, position sensitive monitor. The respirator monitor prototype developed is a computer controlled, position-sensitive detection system employing 56 modular proportional counters mounted in molds conforming to the inner and outer surfaces of a commonly used respirator (Scott Model 801450-40). The molds are housed in separate enclosures and hinged to create a open-quotes waffle-ironclose quotes effect so that the closed monitor will simultaneously survey both surfaces of the respirator. The proportional counter prototype was also designed to incorporate Shonka Research Associates previously developed charge-division electronics. This research provided valuable experience into pixellated position sensitive detection systems. The technology developed can be adapted to other monitoring applications where there is a need for deployment of many traditional radiation detectors

  1. Protection of civil rights and technological development

    International Nuclear Information System (INIS)

    Wagner, H.

    1985-01-01

    The question of how the consequences of technological development are to be mastered on the legal level is not primarily a problem of the administrative procedure. The essential point in the discussion on protection of basic rights is not to be seen in the citizen's right to participate in administrative procedures, but rather in the substantive civil rights of individual persons as against the government, together with the system of values established in the Basic Law and derived from the basic rights, as well as in the proper functioning of the principle of separation of powers (legislature, administration, and judicature). The law on procedure and thus the idea of (protection of civil rights by rules of procedure) in this context only have an enhancing effect. Practical protection of civil rights is also ascertained in the Federal Republic of Germany by the particularly well-established guarantee of access to the courts. Another idea to be mentioned in this context is an approach that can be termed as 'protection of civil rights by government-funded research'. Other facts contributing to building a protective shield against infringement of civil rights by technology, activities or installations, include e.g. the federal structure of the state and the administration, type and scope of organisation of the public service, the established system of environmental protection and the safety provided by the current system of expert opinions. (orig./HSCH) [de

  2. Development of fission Mo-99 production technology

    International Nuclear Information System (INIS)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2001-05-01

    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility

  3. Development of fission Mo-99 production technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2001-05-01

    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility.

  4. Development of Atmospheric Kr-85 Analysis Technology

    Energy Technology Data Exchange (ETDEWEB)

    Keum, Dong Kwon; Lee, Han Soo; Choi, Hei Hu; Kang, Hee Seok; Lee, Wan Ro; Lee, Chang Woo

    2004-12-15

    In order to establish effectively the atmospheric Kr-85 analysis system. the preliminary study, including the analysis of state of the art, the construction of a Kr collection system and its performance test, and the set up of future plan have been performed. As the result of the performance test of the collection system. the concentration of Kr in air was concentrated by about 700 times, compared to that before the collection, and the collected Kr gas volume was about 2.1 cc, which was about 10 times larger than the minimum Kr gas volume (about 0.2cc) required for the measurement of the radioactivity using GM tube. Three-stage action plan for the establishment of the Kr-85 analysis system is presented. In the next stage, the focused works include the completion of the design technology for the Kr collection system via a practical application and the development of critical unit technology for the separation and purification of sample.

  5. Safeguards technology research and development at CIAE

    International Nuclear Information System (INIS)

    Yang Qun

    2001-01-01

    Full text: China Institute of Atomic Energy (CIAE) is a multi-disciplinary institute under the leadership of China National Nuclear Corporation (CNNC). The Laboratory of Technical Research for Nuclear Safeguards was established at CIAE in 1991 to develop safeguards technology and to provide technical assistance to competent authorities for nuclear material management and control, which became one of the key laboratories approved by CNNC in 1993. The main research works for safeguards at CIAE include: nuclear material control and accounting, facilities license review and assessment, domestic inspection, NDA and DA analysis, physical protection and technical training. Research and development of equipment and technique for safeguards has been continuing at CIAE. A variety of NDA equipment that has different resolution and analysis capability has been developed. Method of NDA measurement has been investigated for nuclear material with different characteristics. Mathematics method such as Monte Carlo simulation is applied in NDA. Advanced destructive analysis (DA) instrument is installed at laboratory of CIAE, such as TIMS, ICP-MS and electronic chemistry analyzing system. The high accuracy results of element analysis and isotopic analysis for nuclear material can be obtained. It is possible to measure the types and quantities of nuclear material in a given area by means of NDA and DA. Physical protection system has also been developed. It consists of access control and management, various alarm (including perimeter alarm, intrusion alarms, fire alarms), video and audio monitors, intercommunication set and central console. The system can meet technical requirement for safeguards of first rank. Nuclear material accounting is an important aspect of safeguards research at CIAE. The computer software related to material accounting has been developed. It is the important task for scientists at CIAE to design and review nuclear accounting systems in various facilities. For

  6. EPA-developed, patented technologies available for licensing

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace.

  7. Risk analysis and technology assessment in support of technology development

    NARCIS (Netherlands)

    Wezel, van Annemarie P.; Lente, van Harro; Sandt, van de Johannes J.M.; Bouwmeester, Hans; Vandeberg, Rens L.J.; Sips, Adrienne J.A.M.

    2018-01-01

    Governments invest in “key enabling technologies,” such as nanotechnology, to solve societal challenges and boost the economy. At the same time, governmental agencies demand risk reduction to prohibit any often unknown adverse effects, and industrial parties demand smart approaches to reduce

  8. Development of Integrated Information Technology System

    National Research Council Canada - National Science Library

    Gilstrap, Scott

    2004-01-01

    The Integrated Medical Information Technology System (IMITS) Program is focused on implementation of advanced technology solutions that eliminate inefficiencies, increase utilization and improve quality of care for active duty forces...

  9. Development of the Integrated Information Technology System

    National Research Council Canada - National Science Library

    2005-01-01

    The Integrated Medical Information Technology System (IMITS) Program is focused on implementation of advanced technology solutions that eliminate inefficiencies, increase utilization and improve quality of care for active duty forces...

  10. Demand for Clean Energies Efficient Development in Buildings Technologies

    International Nuclear Information System (INIS)

    Mustafa Omer, Abdeen

    2017-01-01

    Aims/Purpose: The increased availability of reliable and efficient energy services stimulates new development alternatives. This article discusses the potential for such integrated systems in the stationary and portable power market in response to the critical need for a cleaner energy technology. Throughout the theme several issues relating to renewable energies, environment, and sustainable development are examined from both current and future perspectives. It is concluded that green energies like wind, solar, ground source heat pumps, and biomass must be promoted, implemented, and demonstrated from the economic and/or environmental point view. Biogas from biomass appears to have potential as an alternative energy source, which is potentially rich in biomass resources. This is an overview of some salient points and perspectives of biogas technology. The current literature is reviewed regarding the ecological, social, cultural and economic impacts of biogas technology. This article gives an overview of present and future use of biomass as an industrial feedstock for production of fuels, chemicals and other materials. However, to be truly competitive in an open market situation, higher value products are required. Results suggest that biogas technology must be encouraged, promoted, invested, implemented, and demonstrated, but especially in remote rural areas. Study design: Anticipated patterns of future energy use and consequent environmental impacts (acid precipitation, ozone depletion and the greenhouse effect or global warming) are comprehensively discussed in this article. Place and Duration of Study: National Centre for Research, Energy Research Institute (ERI), between January 2014 and July 2015. (author)

  11. Interactions of energy technology development and new energy exploitation with water technology development in China

    International Nuclear Information System (INIS)

    Liang, Sai; Zhang, Tianzhu

    2011-01-01

    Interactions of energy policies with water technology development in China are investigated using a hybrid input-output model and scenario analysis. The implementation of energy policies and water technology development can produce co-benefits for each other. Water saving potential of energy technology development is much larger than that of new energy exploitation. From the viewpoint of proportions of water saving co-benefits of energy policies, energy sectors benefit the most. From the viewpoint of proportions of energy saving and CO 2 mitigation co-benefits of water technology development, water sector benefits the most. Moreover, economic sectors are classified into four categories concerning co-benefits on water saving, energy saving and CO 2 mitigation. Sectors in categories 1 and 2 have big direct co-benefits. Thus, they can take additional responsibility for water and energy saving and CO 2 mitigation. If China implements life cycle materials management, sectors in category 3 can also take additional responsibility for water and energy saving and CO 2 mitigation. Sectors in category 4 have few co-benefits from both direct and accumulative perspectives. Thus, putting additional responsibility on sectors in category 4 might produce pressure for their economic development. -- Highlights: ► Energy policies and water technology development can produce co-benefits for each other. ► For proportions of water saving co-benefits of energy policies, energy sectors benefit the most. ► For proportions of energy saving and CO 2 mitigation co-benefits of water policy, water sector benefits the most. ► China’s economic sectors are classified into four categories for policy implementation at sector scale.

  12. DEVELOPMENT OF TECHNOLOGY AND REGULATORY DOCUMENTATION ON PROCESSED BROCCOLI PRODUCT

    Directory of Open Access Journals (Sweden)

    T. I. Kryachko

    2017-01-01

    Full Text Available The aim of the present investigation was development of an efficient technology for obtaining powders from fresh broccoli; determination of the possibility of using domestic production of broccoli as an import-substituting product; development of regulatory documentation for broccoli powders for the food industry. The research was carried out jointly with the representatives of the Federal Scientific cen-ter of vegetable production on an experimental basis in 2016. The domestic Tonus variety of broccoli (Federal Scientific center of vegetable production and the Maraton F1 hybrid (France, differing in appearance, vegetative period, biochemical and physical characteristics were chosen. Technology of broccoli powder production from domestic and imported products was developed using two methods of drying convection and lyophilization. The gentle drying conditions of broccoli freeze drying compared to convective drying technology provided higher content of both vitamin C and polyphenols in the final powder. Comparative studies of organoleptic and physico-chemical properties of powders obtained from domestic and imported broccoli demonstrated close quality parameters, indicating the possibility of effective domestic broccoli utilization and import substitution. For the first time in the Russian Federation, the "Organization Standard" was developed for regulation of the quality parameters of broccoli powders intended for use in the food industry.

  13. Development of Coated Particle Fuel Technology

    International Nuclear Information System (INIS)

    Cho, Moon Sung; Kim, B. G.; Kim, Y. K.

    2009-04-01

    UO 2 kernel fabrication technology was developed at the lab sacle(20∼30g-UO 2 /batch). The GSP technique, modified method of sol-gel process, was used in the preparation of spherical ADU gel particle and these particles were converted to UO 3 and UO 2 phases in calcination furnace and sintering furnace respectively. Based on the process variables optimized using simulant kernels in 1-2 inch beds, SiC TRISO-coated particles were fabricated using UO 2 kernel. Power densities of TRISO coated particle fuels and gamma heat of the tubes are calculated as functions of vertical location of the fuel specimen in the irradiation holes by using core physics codes, MCNP and Helios. A finite model was developed for the calculations of temperatures and stresses of the specimen and the irradiation tubes. Dimensions of the test tubes are determined based on the temperatures and stresses as well as the gamma heat generated at the given condition. 9 modules of the COPA code (MECH, FAIL, TEMTR, TEMBL, TEMPEB, FPREL, MPRO, BURN, ABAQ), the MECH, FAIL, TEMTR, TEMBL, TEMPEB, and FPREL were developed. The COPA-FPREL was verified through IAEA CRP-6 accident benchmarking problems. KAERI participated in the round robin test of IAEA CRP-6 program to characterize the diameter, sphericity, coating thickness, density and anisotropy of coated particles provided by Korea, USA and South Africa. The inspection and test plan describing specifications and inspection method of coated particles was developed to confirm the quality standard of coated particles. The quality inspection instructions were developed for the inspection of coated particles by particle size analyzer, density inspection of coating layers by density gradient column, coating thickness inspection by X-ray, and inspection of optical anistropy factor of PyC layer. The quality control system for the TRISO-coated particle fuel was derived based on the status of quality control systems of other countries

  14. Liquid metal reactor development. Development of LMR design technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Cheol; Kim, Y. I.; Kim, Y. G.; Kim, E. K.; Song, H.; Chung, H. T.; Sim, Y. S.; Min, B. T.; Kim, Y. S.; Wi, M. H.; Yoo, B.; Lee, J. H.; Lee, H. Y.; Kim, J. B.; Koo, G. H.; Hahn, D. H.; Na, B. C.; Hwang, W.; Nam, C.; Ryu, W. S.; Lim, G. S.; Kim, D. H.; Kim, J. D.; Gil, C. S.

    1997-07-01

    This project was performed in five parts, the scope and contents of which are as follows: The nuclear data processing system was established and the KFS group constant library was improved and verified. Basic computation system was constructed by either developing or adding its function. Input/output (I/O) interface processing was developed to establish an integrated calculation system for LMR core nuclear rand thermal-hydraulic design and analysis. An experimental data analysis was performed to validate the constructed core neutronic calculation system. Using the established core calculation system and design technology, preliminary core design and performance analysis on the domestic LMR core design concept were carried out. To develop the basic technology of the LMR system analysis, LMR system behavior characteristics evaluation, thermal -fluid system analysis in the reactor pool, preliminary overall plant analysis and computer codes development have been performed. A porous model and simple one-dimensional model have been evaluated for the reactor pool analysis. The evaluation of the residual heat removal system on different design concepts has been also conducted. For the development of high temperature structural analysis, the heat transfer and thermal stress analyses were performed using finite element program with user subroutine that has been developed with an implementation of the Chaboche constitutive model for inelastic analysis capability, and the evaluation of creep-fatigue and ratcheting behavior of high temperature structure was carried out using this program. for development of the seismic isolation system and to predict the shear behavior for the laminated rubber bearing were established. And the behavior tests of isolation bearing and rubber specimens were carried out, and the seismic response tests for the isolation model structure were performed using the 30 ton shaking table. (author). 369 refs., 119 tabs., 320 figs.

  15. Wikipedia use: Risk for developing technology addiction

    OpenAIRE

    Sharma, Manoj Kumar

    2016-01-01

    The present case highlights the addictive potential of Wikipedia usage. The users approached a technology addiction clinic for the management of excessive use of technology. A clinical interview was used to elicit information about usages. It indicates the addictive use of Wikipedia and associated dysfunction in lifestyle. It has implication for promotion of healthy use of technology.

  16. Wikipedia use: Risk for developing technology addiction

    Directory of Open Access Journals (Sweden)

    Manoj Kumar Sharma

    2016-01-01

    Full Text Available The present case highlights the addictive potential of Wikipedia usage. The users approached a technology addiction clinic for the management of excessive use of technology. A clinical interview was used to elicit information about usages. It indicates the addictive use of Wikipedia and associated dysfunction in lifestyle. It has implication for promotion of healthy use of technology.

  17. Digital Technology and Student Cognitive Development

    Science.gov (United States)

    Cavanaugh, J. Michael; Giapponi, Catherine C.; Golden, Timothy D.

    2016-01-01

    Digital technology has proven a beguiling, some even venture addictive, presence in the lives of our 21st century (millennial) students. And while screen technology may offer select cognitive benefits, there is mounting evidence in the cognitive neuroscience literature that digital technology is restructuring the way our students read and think,…

  18. Wikipedia use: Risk for developing technology addiction.

    Science.gov (United States)

    Sharma, Manoj Kumar

    2016-01-01

    The present case highlights the addictive potential of Wikipedia usage. The users approached a technology addiction clinic for the management of excessive use of technology. A clinical interview was used to elicit information about usages. It indicates the addictive use of Wikipedia and associated dysfunction in lifestyle. It has implication for promotion of healthy use of technology.

  19. Transferable site remediation technologies developed by U.S. DOE Office of Science and Technology

    International Nuclear Information System (INIS)

    Anderson, T.D.

    1996-01-01

    To provide needed technologies for site remediation, the US Department of Energy's Office of Environmental Management, Office of Science and Technology (OST) is developing technologies to address environmental problems associated with hazardous and radioactive contaminants in soil and groundwater. The Technology Investment Decision model serves as a framework for technology management in OST. Seven technology maturation stages are used in the model. These stages run from basic research through implementation. The Innovative Technology Summary Reports (ITSRs) provide a technical synopsis of an individual technology that has been developed. An ITSR is prepared for each technology that is successfully demonstrated in the field. The information required to produce an ITSR is collected as the technology matures through the Technology Investment Decision Process. As of July 1996 there have been thirteen ITSRs completed. This paper describes those thirteen technologies

  20. New Technologies and Sustainable Development of Industry

    International Nuclear Information System (INIS)

    Muggli, Christoph; Baumgartner, Walter; Werner, Frank

    1996-08-01

    The present technology assessment study examines the effects of three technology scenarios on future energy consumption and the energy-related emissions by industrial manufacturing in Switzerland. The three paths of development (Trend, High-Tech, Alternative) can be represented as follows: After a reduction until 2015, the Trend development entails a slight increase in consumption of energy. Until then consumption is some 10 percent lower in both the High-Tech and the Alternative Scenarios. Consumption of electricity increases in all scenarios, the proportion is highest in 20 year's time under the High-Tech scenario. SO 2 and CO 2 emissions decrease in all scenarios until 2000 and then level out at a low level. The emissions are lowest in the High-Tech scenario. In contrast the NO x and the VOC emissions diminish until 2000 and then rise again continuously. At this juncture important bases are still not yet available for a definitive evaluation with respect to the sustainable development. Sustainability objectives are currently being compiled for Switzerland in the wake of the Berlin Climate Conference and the Rio Conference. In the political lobbies the Green factions are making demands, such as those currently under discussion internationally (e.g. CO 2 reductions on a scale of some 80 percent by 2050), whereas conservative and industrial circle representatives support the objective of sustainable development but reject a quantification of objectives. The official objectives of the Swiss Energy 2000 programme can be achieved with all scenarios. With the High-Tech and Alternative scenarios, concepts of a reduction in CO 2 by 20 percent by 2015 (as currently under discussion in Switzerland), are realistic. However, further energy-relevant efficiency potentials in industrial production can be activated by energy-policy motivated measures. More extensive objectives, such as e.g. a CO 2 reduction of 50 percent, are hardly attainable, even in the long-term, without

  1. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

  2. Cotton, Prof. Aime Auguste

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1935 Honorary. Cotton, Prof. Aime Auguste. Date of birth: 9 October 1869. Date of death: 16 April 1951. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. Theory Of Evolution. Posted on 23 January 2018. Joint Statement by the Three Science Academies of India on the ...

  3. Airbreathing Hypersonic Technology Vision Vehicles and Development Dreams

    Science.gov (United States)

    McClinton, C. R.; Hunt, J. L.; Ricketts, R. H.; Reukauf, P.; Peddie, C. L.

    1999-01-01

    Significant advancements in hypersonic airbreathing vehicle technology have been made in the country's research centers and industry over the past 40 years. Some of that technology is being validated with the X-43 flight tests. This paper presents an overview of hypersonic airbreathing technology status within the US, and a hypersonic technology development plan. This plan builds on the nation's large investment in hypersonics. This affordable, incremental plan focuses technology development on hypersonic systems, which could be operating by the 2020's.

  4. 30 CFR 402.11 - Technology-development project applications.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Technology-development project applications... RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Application, Evaluation, and Management Procedures § 402.11 Technology-development project applications. (a) Grant awards will be used to...

  5. Industrialized Development Models of Agricultural Scientific and Technological Achievements

    OpenAIRE

    WANG, Wanjiang

    2015-01-01

    Industrialization of agricultural scientific and technological achievements has become an extremely important part in agricultural structural adjustment and agricultural economic development. Basic models for industrialization of China’s agricultural scientific and technological achievements should be: (i) integrating scientific and technological development and production relying on large enterprises; (ii) integrating scientific research and development with agricultural scientific and tec...

  6. Methodology Development for Assessment of Spaceport Technology Returns and Risks

    Science.gov (United States)

    Joglekar, Prafulla; Zapata, Edgar

    2001-01-01

    As part of Kennedy Space Center's (KSC's) challenge to open the space frontier, new spaceport technologies must be developed, matured and successfully transitioned to operational systems. R&D investment decisions can be considered from multiple perspectives. Near mid and far term technology horizons must be understood. Because a multitude of technology investment opportunities are available, we must identify choices that promise the greatest likelihood of significant lifecycle At the same time, the costs and risks of any choice must be well understood and balanced against its potential returns The problem is not one of simply rank- ordering projects in terms of their desirability. KSC wants to determine a portfolio of projects that simultaneously satisfies multiple goals, such as getting the biggest bang for the buck, supporting projects that may be too risky for private funding, staying within annual budget cycles without foregoing the requirements of a long term technology vision, and ensuring the development of a diversity of technologies that, support the variety of operational functions involved in space transportation. This work aims to assist in the development of in methods and techniques that support strategic technology investment decisions and ease the process of determining an optimal portfolio of spaceport R&D investments. Available literature on risks and returns to R&D is reviewed and most useful pieces are brought to the attention of the Spaceport Technology Development Office (STDO). KSC's current project management procedures are reviewed. It is found that the "one size fits all" nature of KSC's existing procedures and project selection criteria is not conducive to prudent decision-making. Directions for improving KSC's - procedures and criteria are outlined. With help of a contractor, STDO is currently developing a tool, named Change Management Analysis Tool (CMAT)/ Portfolio Analysis Tool (PAT), to assist KSC's R&D portfolio determination. A

  7. Succinic Acid: Technology Development and Commercialization

    Directory of Open Access Journals (Sweden)

    Nhuan P. Nghiem

    2017-06-01

    Full Text Available Succinic acid is a precursor of many important, large-volume industrial chemicals and consumer products. It was once common knowledge that many ruminant microorganisms accumulated succinic acid under anaerobic conditions. However, it was not until the discovery of Anaerobiospirillum succiniciproducens at the Michigan Biotechnology Institute (MBI, which was capable of producing succinic acid up to about 50 g/L under optimum conditions, that the commercial feasibility of producing the compound by biological processes was realized. Other microbial strains capable of producing succinic acid to high final concentrations subsequently were isolated and engineered, followed by development of fermentation processes for their uses. Processes for recovery and purification of succinic acid from fermentation broths were simultaneously established along with new applications of succinic acid, e.g., production of biodegradable deicing compounds and solvents. Several technologies for the fermentation-based production of succinic acid and the subsequent conversion to useful products are currently commercialized. This review gives a summary of the development of microbial strains, their fermentation, and the importance of the down-stream recovery and purification efforts to suit various applications in the context of their current commercialization status for biologically derived succinic acid.

  8. Development of Very High Temperature Reactor Technology

    International Nuclear Information System (INIS)

    Lee, Won Jae; Noh, J. M.; Kim, Y. H.

    2009-04-01

    For an efficient production of nuclear hydrogen, the VHTR (Very High Temperature Gas-cooled Reactor) of 950 .deg. C outlet temperature and the interfacing system for the hydrogen production are required. We have developed various evaluation technologies for the performance and safety of VHTR through the accomplishment of this project. First, to evaluate the performance of VHTR, a series of analyses has been performed such as core characteristics at 950 .deg. C, applicability of cooled-vessel, intermediate loop system and high temperature structural integrity. Through the analyses of major accidents such as HPCC and LPCC and the analysis of the risk/performance-informed method, VHTR safety evaluation has been also performed. In addition, various design analysis codes have been developed for a nuclear design, system loop design, system performance analysis, air-ingress accident analysis, fission product/tritium transport analysis, graphite structure seismic analysis and hydrogen explosion analysis, and they are being verified and validated through a lot of international collaborations

  9. AIM Data Services

    Directory of Open Access Journals (Sweden)

    Michael Scholz

    2016-05-01

    Full Text Available AIM Data Services as a virtual facility provides virtual 3D reference tracks for simulation applications in the domain of automotive and railway systems. It offers tools for management and analysis of experiment data and a platform for survey and processing of vehicle data in the public transport domain. Collected spatial data is bundled in a database cluster and published through common web mapping interfaces.

  10. Small Orbital Stereo Tracking Camera Technology Development

    Science.gov (United States)

    Bryan, Tom; MacLeod, Todd; Gagliano, Larry

    2017-01-01

    Any exploration vehicle assembled or Spacecraft placed in LEO or GTO must pass through this debris cloud and survive. Large cross section, low thrust vehicles will spend more time spiraling out through the cloud and will suffer more impacts.Better knowledge of small debris will improve survival odds. Current estimated Density of debris at various orbital attitudes with notation of recent collisions and resulting spikes. Orbital Debris Tracking and Characterization has now been added to NASA Office of Chief Technologists Technology Development Roadmap in Technology Area 5 (TA5.7)[Orbital Debris Tracking and Characterization] and is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crews due to the risk of Orbital Debris damage to ISS Exploration vehicles. The Problem: Traditional orbital trackers looking for small, dim orbital derelicts and debris typically will stare at the stars and let any reflected light off the debris integrate in the imager for seconds, thus creating a streak across the image. The Solution: The Small Tracker will see Stars and other celestial objects rise through its Field of View (FOV) at the rotational rate of its orbit, but the glint off of orbital objects will move through the FOV at different rates and directions. Debris on a head-on collision course (or close) will stay in the FOV at 14 Km per sec. The Small Tracker can track at 60 frames per sec allowing up to 30 fixes before a near-miss pass. A Stereo pair of Small Trackers can provide range data within 5-7 Km for better orbit measurements.

  11. Development of decommissioning technology for nuclear fuel facility

    International Nuclear Information System (INIS)

    Tanimoto, Ken-ichi

    1998-01-01

    There are many kinds of objects for decommissioning and their properties are greatly different in respects of morphology, constituent materials, contamination history, etc. Therefore, the techniques for decontamination and dismantlement are required to have a great applicability. In addition, most of contamination nuclides have long half-life and so, it is desirable to rapidly take measures to stop or close a contaminated facility. In consideration of these characteristics developments of elementary techniques for decontamination have been attempted. This report summarized the present states of decommissioning technology for nuclear fuel facility. The function and performance of each elementary technique were examined through test operation and simulation was made for the important techniques of them aiming at generalization and optimization. For remote handling technology, two operation tools; 'metal splitting saw cutting tool' and 'plasma cutting tool' were produced and utilizations of these tools in combination with a robot for conveyance are under investigation now. (M.N.)

  12. Development of Micro-Pattern Gas Detectors Technologies

    CERN Multimedia

    Richer, J; Santos, D; Barsuk, S; Hamar, G; Shah, M K; Catanesi, M G; Colaleo, A; Maggi, M; Loddo, F; Berardi, V; Bagliesi, M; Menon, G; Richter, R; Lahonde-hamdoun, C; Dris, M; Chechik, R; Ochi, A; Hartjes, F; Lopes, I M; Deshpande, A; Franz, A; Dabrowski, W; Fiutowski, T A; Ferreira, A; Bastos de oliveira, C A; Miller, B W; Monrabal-capilla, F; Liubarsky, I; Plazas de pinzon, M C; Tsarfati, T; Voss, B J R; Carmona martinez, J M; Stocchi, A; Dinu, N; Semeniouk, I; Giebels, B; Marton, K; De leo, R; De lucia, E; Alviggi, M; Bellerive, A; Herten, L G; Zimmermann, S U; Giomataris, I; Peyaud, A; Schune, P; Delagnes, E; Delbart, A; Charles, G; Wang, W; Markou, A; Arazi, L; Cibinetto, G; Edo, Y; Neves, F F; Solovov, V; Stoll, S; Sampsonidis, D; Mindur, B; Sauli, F; Calapez de albuquerque veloso, J F; Kahlaoui, N; Sharma, A; Zenker, K; Cebrian guajardo, S V; Luzon marco, G M; Guillaudin, O J H; Cornebise, P; Lounis, A; Bruel, P J; Laszlo, A; Mukerjee, K; Nappi, E; Nuzzo, S V; Bencivenni, G; Tessarotto, F; Levorato, S; Dixit, M S; Riallot, M; Jeanneau, F; Nizery, F G; Maltezos, S; Kyriakis, A; Lyashenko, A; Van der graaf, H; Ferreira marques, R; Alexa, C; Liyanage, N; Dehmelt, K; Hemmick, T K; Polychronakos, V; Cisbani, E; Garibaldi, F; Koperny, S Z; Das neves dias carramate, L F; Munoz-vidal, J; Gutierrez, R; Van stenis, M; Resnati, F; Lupberger, M; Desch, K K; Adloff, C J; Chefdeville, M; Vouters, G; Ranieri, A; Lami, S; Shekhtman, L; Dolgov, A; Bamberger, A; Landgraf, U; Kortner, O; Ferrero, A; Aune, S; Attie, D M; Bakas, G; Balossino, I; Tsigaridas, S; Surrow, B; Gnanvo, K A K; Feege, N M; Woody, C L; Bhattacharya, S; Capogni, M; Zielinska, A Z; Veenhof, R J; Tapan, I; Dangendorf, V; Monteiro bernades, C M; Castro serrato, H F; De oliveira, R; Ropelewski, L; Behnke, T; Boudry, V; Radicioni, E; Lai, A; Shemyakina, E; Giganon, A E; Titov, M; Papakrivopoulos, I; Komai, H; Van bakel, N A; Tchepel, V; Repond, J O; Li, Y; Kourkoumelis, C; Tzamarias, S; Majumdar, N; Kowalski, T; Da rocha azevedo, C D; Serra diaz cano, L; Alvarez puerta, V; Trabelsi, A; Riegler, W; Ketzer, B F; Rosemann, C G; Herrera munoz, D C; Drancourt, C; Mayet, F; Geerebaert, Y; De robertis, G; Felici, G; Scribano memoria, A; Cecchi, R; Dalla torre, S; Gregori, M; Buzulutskov, A; Schwegler, P; Sanchez nieto, F J; Colas, P M A; Gros, M; Neyret, D; Zito, M; Ferrer ribas, E; Breskin, A; Martoiu, V S; Purschke, M L; Loomba, D; Gasik, P J; Petridou, C; Kordas, K; Mukhopadhyay, S; Bucciantonio, M; Biagi, S F; Ji, X; Kanaki, K; Zavazieva, D; Capeans garrido, M D M; Schindler, H; Kaminski, J; Krautscheid, T; Lippmann, C; Arora, R; Dafni, T; Garcia irastorza, I; Puill, V; Wicek, F B; Burmistrov, L; Singh, K P; Pugliese, G; Kroha, H; Kunne, F; Alexopoulos, T; Daskalakis, G; Geralis, T; Bettoni, D; Heijhoff, K; Xiao, Z; Tzanakos, G; Leisos, A; Frullani, S; Sahin, O; Kalkan, Y; Giboni, K; Krieger, C; Breton, D R; Bhattacharyya, S; Abbrescia, M; Erriquez, O; Paticchio, V; Cardini, A; Aloisio, A; Turini, N; Bressan, A; Tikhonov, Y; Schumacher, M; Simon, F R; Nowak, S; Herlant, S; Chaus, A; Fanourakis, G; Bressler, S; Homma, Y; Timmermans, J; Fonte, P; Underwood, D G; Azmoun, B; Fassouliotis, D; Wiacek, P; Dos santos covita, D; Monteiro da silva, A L; Yahlali haddou, N; Marques ferreira dos santos, J; Domingues amaro, F

    The proposed R&D collaboration, RD51, aims at facilitating the development of advanced gas-avalanche detector technologies and associated electronic-readout systems, for applications in basic and applied research. Advances in particle physics have always been enabled by parallel advances in radiation-detector technology. Radiation detection and imaging with gas-avalanche detectors, capable of economically covering large detection volumes with a low material budget, have been playing an important role in many fields. Besides their widespread use in particle-physics and nuclear-physics experiments, gaseous detectors are employed in many other fields: astro-particle research and applications such as medical imaging, material science, and security inspection. While extensively employed at the LHC, RHIC, and other advanced HEP experiments, present gaseous detectors (wire-chambers, drift-tubes, resistive-plate chambers and others) have limitations which may prevent their use in future experiments. Present tec...

  13. Development of decommissioning technology for nuclear fuel facility

    Energy Technology Data Exchange (ETDEWEB)

    Tanimoto, Ken-ichi [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1998-01-01

    There are many kinds of objects for decommissioning and their properties are greatly different in respects of morphology, constituent materials, contamination history, etc. Therefore, the techniques for decontamination and dismantlement are required to have a great applicability. In addition, most of contamination nuclides have long half-life and so, it is desirable to rapidly take measures to stop or close a contaminated facility. In consideration of these characteristics developments of elementary techniques for decontamination have been attempted. This report summarized the present states of decommissioning technology for nuclear fuel facility. The function and performance of each elementary technique were examined through test operation and simulation was made for the important techniques of them aiming at generalization and optimization. For remote handling technology, two operation tools; `metal splitting saw cutting tool` and `plasma cutting tool` were produced and utilizations of these tools in combination with a robot for conveyance are under investigation now. (M.N.)

  14. Technology Development Risk Assessment for Space Transportation Systems

    Science.gov (United States)

    Mathias, Donovan L.; Godsell, Aga M.; Go, Susie

    2006-01-01

    A new approach for assessing development risk associated with technology development projects is presented. The method represents technology evolution in terms of sector-specific discrete development stages. A Monte Carlo simulation is used to generate development probability distributions based on statistical models of the discrete transitions. Development risk is derived from the resulting probability distributions and specific program requirements. Two sample cases are discussed to illustrate the approach, a single rocket engine development and a three-technology space transportation portfolio.

  15. Construction in year 2030: developing an information technology vision.

    Science.gov (United States)

    Erdogan, B; Abbott, C; Aouad, G

    2010-08-13

    Emerging technologies offer new solutions to the construction industry, improving processes, enabling automation and effective decision-making mechanisms and changing current ways of work. Previous research has tended to consider a direct causal relationship between the emerging and prospective technologies and the future of construction. However, the future of construction will be influenced not only by the developments in the information technology (IT) industry, but also by other technological changes. Societal, economic, environmental and political factors will shape the future, together with emerging technologies. This paper presents a scenario-planning exercise that aimed to identify possible futures that the construction industry might face. In order to achieve the aims of the research, a literature review was carried out on scenario planning and future studies related to construction and construction IT, which was followed by a mini survey and two prospective workshops as part of the La Prospective scenario-planning approach. In a future study, it is important to understand the forces, issues and trends in order to inform and enable further thinking and action towards achieving a preferred future state whilst being prepared for what might be round the corner. Therefore, the paper first investigates the driving forces of change, main trends, issues and factors that might shape the future, focusing on factors related to society, technology, environment, economy and politics. Secondly, four future scenarios that were developed keeping these factors in mind are presented. The scenarios start from a global view and present the images of the future world in year 2030. They later focus on the construction industry, imagining how it will be shaped by the future world and trying to visualize the information and communication technology implications for construction. Finally, a preferred future scenario for 2030 is introduced based on the principle that the future

  16. LIDAR technology developments in support of ESA Earth observation missions

    Science.gov (United States)

    Durand, Yannig; Caron, Jérôme; Hélière, Arnaud; Bézy, Jean-Loup; Meynart, Roland

    2017-11-01

    Critical lidar technology developments have been ongoing at the European Space Agency (ESA) in support of EarthCARE (Earth Clouds, Aerosols, and Radiation Explorer), the 6th Earth Explorer mission, and A-SCOPE (Advanced Space Carbon and Climate Observation of Planet Earth), one of the candidates for the 7th Earth Explorer mission. EarthCARE is embarking an Atmospheric backscatter Lidar (ATLID) while A-SCOPE is based on a Total Column Differential Absorption Lidar. As EarthCARE phase B has just started, the pre-development activities, aiming at validating the technologies used in the flight design and at verifying the overall instrument performance, are almost completed. On the other hand, A-SCOPE pre-phase A has just finished. Therefore technology developments are in progress, addressing critical subsystems or components with the lowest TRL, selected in the proposed instrument concepts. The activities described in this paper span over a broad range, addressing all critical elements of a lidar from the transmitter to the receiver.

  17. Diagnosing Management of Agricultural Research and Technology Development under the Agricultural Innovation Framework

    Directory of Open Access Journals (Sweden)

    2014-06-01

    Full Text Available This study aimed at identifying and analyzing issues and challenges on the agricultural research and technology development under the national innovation framework. The survey consisted of two groups: agricultural researchers of Agriculture-Research and Education Organization and all faculty members of public agricultural faculties of Ministry of Scientific, Research and Technology. Using Cochran sampling formula and multi-stage sampling method, 188 researchers and 205 faculty members were selected in order to fill in the survey questionnaire. Using the SPSS, collected data analyzed based on explanatory factor analysis. Totally, factor analysis of three sets of issues and challenges on the agricultural research and technology development under the national innovation framework led to extract 13 factors, including agricultural structure and policy, infrastructure and resources of agricultural development, supportive services for agricultural development (level of agricultural development, investment and capacity building in research and technology, management of research and technology development, research and technology productivity, research culture, networks for research and technology development (level of national innovation system, agricultural research policy, impacts and effectiveness of agricultural research and technology development, integrated management of research and technology, institutional development for agricultural research and technology and systematic synergy of agricultural research and higher education (level of agricultural innovation system. Totally, these three sets of factors explained 64%, 75% and 73% of the total variances. Finally, using conceptual clustering for the extracted factors, a conceptual model of issues and challenges of agricultural research and technology development under the national innovation framework was presented.

  18. Some implications of in situ uranium mining technology development

    Energy Technology Data Exchange (ETDEWEB)

    Cowan, C.E.; Parkhurst, M.A.; Cole, R.J.; Keller, D.; Mellinger, P.J.; Wallace, R.W.

    1980-09-01

    A technology assessment was initiated in March 1979 of the in-situ uranium mining technology. This report explores the impediments to development and deployment of this technology and evaluates the environmental impacts of a generic in-situ facility. The report is divided into the following sections: introduction, technology description, physical environment, institutional and socioeconomic environment, impact assessment, impediments, and conclusions. (DLC)

  19. Some implications of in situ uranium mining technology development

    International Nuclear Information System (INIS)

    Cowan, C.E.; Parkhurst, M.A.; Cole, R.J.; Keller, D.; Mellinger, P.J.; Wallace, R.W.

    1980-09-01

    A technology assessment was initiated in March 1979 of the in-situ uranium mining technology. This report explores the impediments to development and deployment of this technology and evaluates the environmental impacts of a generic in-situ facility. The report is divided into the following sections: introduction, technology description, physical environment, institutional and socioeconomic environment, impact assessment, impediments, and conclusions

  20. Astrbiology Science and Technology for Instrument Development (ASTID)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Astrobiology Science and Technology for Instrument Development (ASTID) develops instrumentation capabilities to help meet Astrobiology science requirements on...

  1. Nuclear technology and the developing world

    International Nuclear Information System (INIS)

    Walsh, Kathleen

    2005-01-01

    The early 21st century has magnified the dangers posed by proliferation of weapons of mass destruction (WMD). Nonetheless, cooperative efforts to thwart this trade have grown considerably more difficult and the challenges more complicated. The ubiquitous nature of dual-use technology, the application of terrorist tactics for mass destruction on 9/11, the emergence of a more unilateralist US foreign policy, and the world's ever-expanding economic relations have all made more arduous the task of stemming proliferation of WMD, their precursors, and delivery systems. All of these challenges have been highlighted in recent years, but it is the last of these - the changing nature of the global economy- that is perhaps least analyzed but also most essential to improving international cooperation on nonproliferation. Many of today's proliferation concerns are familiar problems exacerbated by accelerating levels of international trade and investment. For example, controlling sensitive exports has become more complicated as officials, industry leaders, and nonproliferation experts must struggle simultaneously to find ways to ensure the flow of exports to legitimate buyers and supply chain partners who increasingly span the globe. Similarly, competitive enterprises today place a premium on rapid delivery and the speed of transactions. This in turn has increased pressures placed on officials around the world to reduce the time they spend evaluating each licensing decision, even as these assessments become more difficult as global investors move deeper into the developing world. Furthermore, the emergence of developing economies as second-tier suppliers with the potential to transship critically sensitive technologies to third parties is another complicating factor and a consequence of the globalizing economy. Science, technology, and industry research and development activities with dual-use applications are also becoming increasingly international endeavors, facilitated

  2. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  3. Development of technologies for national control of and accountancy for nuclear materials

    International Nuclear Information System (INIS)

    Choi, Young Myung; Kwack, E. H.; Kim, B. K.

    2002-03-01

    The aim of this project is to establish a rigid foundation of national safeguards and to develop the new technologies for the nuclear control. This project is composed of four different technologies; 1. Monitoring technology for nuclear materials, 2. Detection technology for a single particle, 3. Safeguards information management technology, 4. Physical protection technology. Various studies such as a remote verification system for CANDU spent fuel in dry storage canister, a spent fuel verification system using an optical fiber scintillator, and development of softwares for safeguards and physical protection were performed in the frist phase('99-'01). As a result of this research, it has been identified that the developed technologies could be a crucial means of the control for the nuclear material and facilities related. We are planing to accomplish a steady national safeguard system in the second phase('02-'06). This research will help to elevate the transparency and credibility in national nuclear activities by improving the relative technologies

  4. Development of a software for a multi-processor system aimed at the on-line control of nuclear physics experiments

    International Nuclear Information System (INIS)

    Poggioli, Jean Renaud

    1984-01-01

    This research thesis reports the development of a software for an acquisition computer aimed at the on-line control of nuclear physics experiments. An original architecture, based on the assignment of a processor to each fundamental task, enables the implementation of a high performance system. In order to make the user free of programming constraints, the author developed a software for dynamic generation of acquisition and processing codes. These codes are created from a data base which is programmed by the user by using a language close to the physical reality. Procedures of interactive control of the experiment are thus simplified by displaying function menus on the operator terminal. The author evokes possible hardware improvements and possible extensions of the system [fr

  5. Exploitation of Technology by Tshwane Residents for Tourism Development Purposes

    OpenAIRE

    P. P. S. Sifolo; M. J. Maimela M. P. Tladi

    2014-01-01

    This article investigates technology used by Tshwane residents intended for tourism purposes. The aim is to contribute information for planning and management concerning technology within the tourism sector in the city of Tshwane, South Africa. This study identified the types of tourist related technologies used by the Tshwane residents, be it for business purposes or personal use. The study connected the exploitation of technology for tourism purposes through unpacking the tourism sector as ...

  6. Developing an instrument for assessing students' concepts of the nature of technology

    Science.gov (United States)

    Liou, Pey-Yan

    2015-05-01

    Background:The nature of technology has been rarely discussed despite the fact that technology plays an essential role in modern society. It is important to discuss students' concepts of the nature of technology, and further to advance their technological literacy and adaptation to modern society. There is a need to assess high school students' concepts of the nature of technology. Purpose:This study aims to engage in discourse on students' concepts of the nature of technology based on a proposed theoretical framework. Moreover, another goal is to develop an instrument for measuring students' concepts of the nature of technology. Sample:Four hundred and fifty-five high school students' perceptions of technology were qualitatively analyzed. Furthermore, 530 students' responses to a newly developed questionnaire were quantitatively analyzed in the final test. Design and method:First, content analysis was utilized to discuss and categorize students' statements regarding technology and its related issues. The Student Concepts of the Nature of Technology Questionnaire was developed based on the proposed theoretical framework and was supported by the students' qualitative data. Finally, exploratory factor analysis and reliability analysis were applied to determine the structure of the items and the internal consistency of each scale. Results:Through a process of instrument development, the Student Concepts of the Nature of Technology Questionnaire was shown to be a valid and reliable tool for measuring students' concepts of the nature of technology. This newly developed questionnaire is composed of 29 items in six scales, namely 'technology as artifacts,' 'technology as an innovation change,' 'the current role of technology in society,' 'technology as a double-edged sword,' 'technology as a science-based form,' and 'history of technology.' Conclusions:The Student Concepts of the Nature of Technology Questionnaire has been confirmed as a reasonably valid and reliable

  7. Political strategies concerning technological development after Chernobyl

    International Nuclear Information System (INIS)

    Soeldner-Rembold, S.

    1986-01-01

    The twelve contributions compiled in this book are intended to show political as well as technological conclusions to be drawn from the Chernobyl reactor accident. The material presented stands up to the arguments put forward by the nuclear lobbyists, and explains reasons calling for a nuclear shut-down, backing out of the fast breeder reactor technology and of the fusion technology. Brown coal is stated to be the energy source of choice. (DG) [de

  8. Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Technology Development Overview

    Science.gov (United States)

    Hughes, Stephen J.; Cheatwood, F. McNeil; Calomino, Anthony M.; Wright, Henry S.; Wusk, Mary E.; Hughes, Monica F.

    2013-01-01

    The successful flight of the Inflatable Reentry Vehicle Experiment (IRVE)-3 has further demonstrated the potential value of Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. This technology development effort is funded by NASA's Space Technology Mission Directorate (STMD) Game Changing Development Program (GCDP). This paper provides an overview of a multi-year HIAD technology development effort, detailing the projects completed to date and the additional testing planned for the future.

  9. Development of Innovative Construction Technologies for ABWRs

    International Nuclear Information System (INIS)

    Yamashita, T.; Fukuda, T.; Masuda, N.

    2002-01-01

    This paper describes an effort by Tokyo Electric Power Company (TEPCO) to shorten the construction time in a drastic manner for the Advanced Boiling Water Reactors (ABWR), thereby aiming at reducing construction costs. First an outline of the actual construction records for the five BWR Units and the two ABWR Units at the Kashiwazaki-Kariwa site is introduced along with the construction methods employed for these units. There is a continued trend in the reduction of construction time from Unit 1 to 7 owing to a number of improvements made to these units, and in particular it is noteworthy that the drastic reduction was accomplished due to the change in reactor type from BWR to ABWR. Explained next is an on-going effort for the next ABWR and the following next generation of ABWRs to further shorten construction time. In this effort an emphasis is laid on the development of innovative construction methods by the adoption of steel plate/concrete composite structures (SC Structure), and the application of those structures even to containment vessel (so-called SCCV). This work is being conducted as part of TEPCO's research and development for the next generation ABWRs (ABWR II). Presently it is expected that the construction time from bedrock inspection to fuel loading could be shortened in a stepwise fashion to 38 and 31.5 months for the next ABWR and finally to 23 months for the next generation ABWR II, thus enabling a greatly reduced power generating cost and enhanced safety during construction. In addition to the above effort, a preliminary study has been performed concerning the application of base isolation systems to ABWR plants. From this study which is aimed at standardization, lowered cost and mitigation of engineering work, it was found that base isolation system effectively reduces seismic response and is instrumental in achieving the above-mentioned objectives. Therefore it can be said that the use of this system gives more freedom in selecting sites

  10. Elementary Teachers' Experiences with Technology Professional Development and Using Technology in the Classroom: A Case Study

    Science.gov (United States)

    Grizzle, Pamela Lavon

    2016-01-01

    In order for educators to prepare students for technology-enhanced learning educators must first be prepared. The digital divide and technology professional development are two factors impacting the depth at which technology is integrated into the classroom. The local problem addressed in this study was that the impact of technology professional…

  11. Development of Multimodal Human Interface Technology

    Science.gov (United States)

    Hirose, Michitaka

    About 20 years have passed since the word “Virtual Reality” became popular. During these two decades, novel human interface technology so called “multimodal interface technology” has been formed. In this paper, firstly, recent progress in realtime CG, BCI and five senses IT is quickly reviewed. Since the life cycle of the information technology is said to be 20 years or so, novel directions and paradigms of VR technology can be found in conjunction with the technologies forementioned. At the end of the paper, these futuristic directions such as ultra-realistic media are briefly introduced.

  12. Developing a research agenda for patient safety in primary care. Background, aims and output of the LINNEAUS collaboration on patient safety in primary care

    Science.gov (United States)

    Esmail, Aneez; Valderas, Jose M.; Verstappen, Wim; Godycki-Cwirko, Maciek; Wensing, Michel

    2015-01-01

    ABSTRACT This paper is an introduction to a supplement to The European Journal of General Practice, bringing together a body of research focusing on the issue of patient safety in relation to primary care. The supplement represents the outputs of the LINNEAUS collaboration on patient safety in primary care, which was a four-year (2009–2013) coordination and support action funded under the Framework 7 programme by the European Union. Being a coordination and support action, its aim was not to undertake new research, but to build capacity through engaging primary care researchers and practitioners in identifying some of the key challenges in this area and developing consensus statements, which will be an essential part in developing a future research agenda. This introductory article describes the aims of the LINNEAUS collaboration, provides a brief summary of the reasons to focus on patient safety in primary care, the epidemiological and policy considerations, and an introduction to the papers included in the supplement. PMID:26339828

  13. Technology Development Roadmap: A Technology Development Roadmap for a Future Gravitational Wave Mission

    Science.gov (United States)

    Camp, Jordan; Conklin, John; Livas, Jeffrey; Klipstein, William; McKenzie, Kirk; Mueller, Guido; Mueller, Juergen; Thorpe, James Ira; Arsenovic, Peter; Baker, John; hide

    2013-01-01

    Humankind will detect the first gravitational wave (GW) signals from the Universe in the current decade using ground-based detectors. But the richest trove of astrophysical information lies at lower frequencies in the spectrum only accessible from space. Signals are expected from merging massive black holes throughout cosmic history, from compact stellar remnants orbiting central galactic engines from thousands of close contact binary systems in the Milky Way, and possibly from exotic sources, some not yet imagined. These signals carry essential information not available from electromagnetic observations, and which can be extracted with extraordinary accuracy. For 20 years, NASA, the European Space Agency (ESA), and an international research community have put considerable effort into developing concepts and technologies for a GW mission. Both the 2000 and 2010 decadal surveys endorsed the science and mission concept of the Laser Interferometer Space Antenna (LISA). A partnership of the two agencies defined and analyzed the concept for a decade. The agencies partnered on LISA Pathfinder (LPF), and ESA-led technology demonstration mission, now preparing for a 2015 launch. Extensive technology development has been carried out on the ground. Currently, the evolved Laser Interferometer Space Antenna (eLISA) concept, a LISA-like concept with only two measurement arms, is competing for ESA's L2 opportunity. NASA's Astrophysics Division seeks to be a junior partner if eLISA is selected. If eLISA is not selected, then a LISA-like mission will be a strong contender in the 2020 decadal survey. This Technology Development Roadmap (TDR) builds on the LISA concept development, the LPF technology development, and the U.S. and European ground-based technology development. The eLISA architecture and the architecture of the Mid-sized Space-based Gravitational-wave Observatory (SGO Mid)-a competitive design with three measurement arms from the recent design study for a NASA

  14. THE ROLE OF THE PUBLIC SECTOR IN TECHNOLOGY DEVELOPMENT: GENERALIZATIONS FROM GENERAL PURPOSE TECHNOLOGIES

    OpenAIRE

    Ruttan, Vernon W.

    2001-01-01

    In the new science and technology policy literature that emerged in the early 1980s it was held, while public support for science is appropriate, public support for technology development represents an unproductive use of public resources. The perspective that emerges in my recent book, Technology, Growth and Development: An Induced Innovation Perspective is quite different. Government has played an important role in technology development and transfer in almost every U.S. industry that has b...

  15. Annual report 1974. Sodium technology development programme

    International Nuclear Information System (INIS)

    1975-01-01

    The sodium technology development program comprises a number of separate research programs in the field of designing and testing parts and components for the SNR-300 reactor. Design studies and theoretical studies on cold trapping and the behavior of hydrogen in sodium circuits are reported. A preliminary test program for fighting sodium fires is completed. Results of research done on vibration measurements and counter-current mixing in a dummy tube bundle of a S.N.R. spiralized steam generator with counter-current flow are reported briefly. Research done in the field of heat transfer, pressure drop and bubble dynamics of a straight pipe steam generator are also briefly reported. To determine the influence of spiral diameter of the spiralized pipe on heat transfer in a spiralized pipe heat exchanger, a second testsection will be built in 1975. Research was reported on pump viscoseals, bearing stability, rotordynamics and bearing materials for sodium pumps. Research done on the properties of SNR-construction materials at high temperature and long time exposure and corrosion in sodium are reported. Fundamental research on corrosion accompanied this research. The report closes with results of weldability, mechanized-welding and remote welding of sodium-wetted surfaces

  16. New developments in surface technology and prototyping

    Science.gov (United States)

    Himmer, Thomas; Beyer, Eckhard

    2003-03-01

    Novel lightweight applications in the automotive and aircraft industries require advanced materials and techniques for surface protection as well as direct and rapid manufacturing of the related components and tools. The manufacturing processes presented in this paper are based on multiple additive and subtractive technologies such as laser cutting, laser welding, direct laser metal deposition, laser/plasma hybrid spraying technique or CNC milling. The process chain is similar to layer-based Rapid Prototyping Techniques. In the first step, the 3D CAD geometry is sliced into layers by a specially developed software. These slices are cut by high speed laser cutting and then joined together. In this way laminated tools or parts are built. To improve surface quality and to increase wear resistance a CNC machining center is used. The system consists of a CNC milling machine, in which a 3 kW Nd:YAG laser, a coaxial powder nozzle and a digitizing system are integrated. Using a new laser/plasma hybrid spraying technique, coatings can be deposited onto parts for surface protection. The layers show a low porosity and high adhesion strength, the thickness is up to 0.3 mm, and the lower effort for preliminary surface preparation reduces time and costs of the whole process.

  17. Development of beam utilization/application technology

    International Nuclear Information System (INIS)

    Choi, B. H.; Kim, Y.K.; Song, T.Y.

    1999-05-01

    High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized for industries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs

  18. BNCT Technology Development on HANARO Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chun, Ki Jung; Park, Kyung Bae; Whang, Seung Ryul; Kim, Myong Seop

    2007-06-15

    So as to establish the biological effects of BNCT in the HANARO Reactor, biological damages in cells and animals with treatment of boron/neutron were investigated. And 124I-BPA animal PET image, analysis technology of the boron contents in the mouse tissues by ICP-AES was established. A Standard clinical protocol, a toxicity evaluation report and an efficacy investigation report of BNCT has been developed. Based on these data, the primary permission of clinical application was acquired through IRB of our hospital. Three cases of pre-clinical experiment for boron distribution and two cases of medium-sized animal simulation experiment using cat with verifying for 2 months after BNCT was performed and so the clinical demonstration with a patient was prepared. Also neutron flux, fast neutron flux and gamma ray dose of BNCT facility were calculated and these data will be utilized good informations for clinical trials and further BNCT research. For the new synthesis of a boron compound, o-carboranyl ethylamine, o-carboranylenepiperidine, o-carboranyl-THIQ and o-carboranyl-s-triazine derivatives were synthesized. Among them, boron uptake in the cancer cell of the triazine derivative was about 25 times than that of BPA and so these three synthesized methods of new boron compounds were patented.

  19. Development of beam utilization/application technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, B. H.; Kim, Y.K.; Song, T.Y. [and others

    1999-05-01

    High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized forindustries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs.

  20. BNCT Technology Development on HANARO Reactor

    International Nuclear Information System (INIS)

    Chun, Ki Jung; Park, Kyung Bae; Whang, Seung Ryul; Kim, Myong Seop

    2007-06-01

    So as to establish the biological effects of BNCT in the HANARO Reactor, biological damages in cells and animals with treatment of boron/neutron were investigated. And 124I-BPA animal PET image, analysis technology of the boron contents in the mouse tissues by ICP-AES was established. A Standard clinical protocol, a toxicity evaluation report and an efficacy investigation report of BNCT has been developed. Based on these data, the primary permission of clinical application was acquired through IRB of our hospital. Three cases of pre-clinical experiment for boron distribution and two cases of medium-sized animal simulation experiment using cat with verifying for 2 months after BNCT was performed and so the clinical demonstration with a patient was prepared. Also neutron flux, fast neutron flux and gamma ray dose of BNCT facility were calculated and these data will be utilized good informations for clinical trials and further BNCT research. For the new synthesis of a boron compound, o-carboranyl ethylamine, o-carboranylenepiperidine, o-carboranyl-THIQ and o-carboranyl-s-triazine derivatives were synthesized. Among them, boron uptake in the cancer cell of the triazine derivative was about 25 times than that of BPA and so these three synthesized methods of new boron compounds were patented

  1. Development of Joining Technology for KO TBM

    International Nuclear Information System (INIS)

    Jung, Yang Il; Park, Jeong Yong; Lee, Jung Suk; Choi, Byoung Kwon; Jeong, Yong Hwan; Hong, Bong Guen

    2009-01-01

    TBM(Test Blanket Module) is introduced to test the feasibility and practicability of the design concepts of tritium breeding high temperature blankets relevant to a future fusion power reactor, especially the next step beyond ITER DEMO. Materials for TBM are categorized into five parts: armor material, structural material, tritium breeding material, neutron multiplier, and coolant material. Table I demonstrates the materials briefly. In Korea, two types of TBM, i.e. He cooled solid breeder (HCSB) and He cooled molten Li Breeder (HCML), are considered. For the fabrication of TBM, the joining technology for Be (as an armor material) and ferritic-martensitic steel (as an structural material) is also developing by the Korea Atomic Energy Research Institute. In this paper, the joining of Be with FMS will be presented. The Be and FMS joined successfully by adopting (i) coating of a compliant layer, and (ii) diffusion barrier. The effect of the interlayer properties will be discussed in view of the diffusion and proper bonding strength

  2. Development beer technology with amaranth flour

    Directory of Open Access Journals (Sweden)

    M. M. Danina

    2016-01-01

    Full Text Available At the present time, the urgent problem is the development of product range of beer and the reduction of production costs. We used amaranth flour: "protein" and "carbohydrate", is designed and experimentally obtained from seeds of amaranth and made available for research "Agros" company (Kaliningrad region. The article discusses the effects of different concentrations of flour on the process of mashing, fermentation and the quality of beer. Prepared in the ratio of light barley malt:amaranth flour 90:10 and 80:20, respectively. Experimental were chosen of mashing barley malt with the addition of flour. The mashing process started with a temperature of 40 or 500C. Cytolytic pause was 30 min, protein-25 min, malt pause was increased up to 30 min. Using 20% of flour in the total grain charge leads to the increase of first wort extract content to 12.2%. By increasing the amount of flour in the grist of grain products increases the saccharification of the mash. The time of saccharification when you make 20% of the "protein" flour and the initial temperature of mashing 500C is 26 minutes, and "carbohydrate" flour -18min., therefore, when developing technology of new beer, from the point of view of reducing the cost of production, it is advisable to use "carbohydrate" amaranth flour in the amount of 20% in the total grain products. We estimated the impact of concentrations used flour on organoleptic indicators of finished beer on a 25 point scale. The aroma of the beer was felt citrus and malt undertones. Total score of beer with 10% amaranth flour is 18 points, and 20% amaranth flour is 20 points.

  3. Development of cereals for animal feed technology

    Directory of Open Access Journals (Sweden)

    A. N. Ostrikov

    2017-01-01

    Full Text Available The technological process of cereals production used in the production of feed stuff, which includes the following basic steps: grain moistening; binning of moistened grain for redistribution of moisture in the bulk of kernel; steaming of moistened grain; rolling of steamed grain; drying and cooling of flakes – is developed. In the production of flakes from scoured barley and oat grain before feeding to the rolling line film removal from the grain of these crops and the separation of the husks is carried out by one the existing methods: the method of grinding, followed by sifting and eventilation of films from tail fractions or a method of peeling on special machines with a separation of films. Wet-heat treatment of grain, followed by rolling helps to improve taste and palatability of feed, improves the nutritional value of carbohydrate and protein complexes, reduces the exertion of the body to digest food nutrients, allows to inactivate antinutritional substances and free the grain from the pathogenic and other microorganisms. In the duration of rolling process splitting of complex carbohydrates occurs, starch loses its original structure and is easier exposed to enzymes. The dried and cooled flakes have satisfactory flowability, do not set up. Humidity of flakes is not more than 14%, the temperature is not more than 10 °C above the ambient temperature, bulk density is 350–400 kg/m3. Developed set of equipment allows producing cereal flakes, the use of which in feed stuff and rations of young cattle and pigs increases the productivity of animals by 15–20% while reducing feed costs by 12–15%. Cereal flakes are used in the manufacture of complete feed for piglets (pigs at the age of 10 to 60 days, feed concentrates for pigs under the age of 4 months, the calves under the age of 115 days, high-producing cows, sporting and trained horses and lactating mares.

  4. Working Environment and Technological Development - An Introduction

    DEFF Research Database (Denmark)

    Clausen, Christian; Nielsen, Klaus T.

    1997-01-01

    The chapter is concerned with the different departures, research questions, positions and controversies that is identified in the research programme: Working Environment and Technological Environment. The chapter counterposes positions from six different chapters and raises four themes for debate...... and further research. 1) Whast is planning? 2) Organisational change - learning or political processes? 3) Transformations of technology. 4) Strategies for considering working conditions....

  5. Office of Technology Development's integrated program for development of in situ remediation technologies

    International Nuclear Information System (INIS)

    Peterson, M.E.; Shupe, M.; Walker, J.; Ellis, B.

    1992-03-01

    The In-Situ Remediation Integrated Program (ISR IP) was initiated in FY 1991 and is progressing through the planning stages. The ISR IP currently plans to invest in the development of in situ bioremediation for the cleanup of volatile organics in the vadose zone and in groundwater, and in R ampersand D activities to support the development of electrokinetics. Additional investment decisions will be made as a result of convening technical support groups to evaluate and recommend R ampersand D activities for other in situ remediation technologies. The major activities for this fiscal year include the overall planning for the ISR IP. A five-year program plan to be prepared later this year will establish the long-term goals for the program. To support the preparation of this plan, interfaces with the integrated demonstrations, environmental restoration and waste operations have been formed to assure that the R ampersand D activities are focused on the priority problem descriptions and technology needs

  6. Design of the Balance@Work project: systematic development, evaluation and implementation of an occupational health guideline aimed at the prevention of weight gain among employees

    Directory of Open Access Journals (Sweden)

    Weel Andre NH

    2009-12-01

    Full Text Available Abstract Background Occupational health professionals may play an important role in preventive health promotion activities for employees. However, due to a lack of knowledge and evidence- and practice based methods and strategies, interventions are hardly being implemented by occupational physicians to date. The aim of the Balance@Work project is to develop, evaluate, and implement an occupational health guideline aimed at the prevention of weight gain among employees. Methods Following the guideline development protocol of the Netherlands Society of Occupational Medicine and the Intervention Mapping protocol, the guideline was developed based on literature, interviews with relevant stakeholders, and consensus among an expert group. The guideline consists of an individual and an environmental component. The individual component includes recommendations for occupational physicians on how to promote physical activity and healthy dietary behavior based on principles of motivational interviewing. The environmental component contains an obesogenic environment assessment tool. The guideline is evaluated in a randomised controlled trial among 20 occupational physicians. Occupational physicians in the intervention group apply the guideline to eligible workers during 6 months. Occupational physicians in the control group provide care as usual. Measurements take place at baseline and 6, 12, and 18 months thereafter. Primary outcome measures include waist circumference, daily physical activity and dietary behavior. Secondary outcome measures include sedentary behavior, determinants of behavior change, body weight and body mass index, cardiovascular disease risk profile, and quality of life. Additionally, productivity, absenteeism, and cost-effectiveness are assessed. Discussion Improving workers' daily physical activity and dietary behavior may prevent weight gain and subsequently improve workers' health, increase productivity, and reduce absenteeism

  7. Design of the Balance@Work project: systematic development, evaluation and implementation of an occupational health guideline aimed at the prevention of weight gain among employees.

    Science.gov (United States)

    Verweij, Lisanne M; Proper, Karin I; Weel, Andre N H; Hulshof, Carel T J; van Mechelen, Willem

    2009-12-14

    Occupational health professionals may play an important role in preventive health promotion activities for employees. However, due to a lack of knowledge and evidence- and practice based methods and strategies, interventions are hardly being implemented by occupational physicians to date. The aim of the Balance@Work project is to develop, evaluate, and implement an occupational health guideline aimed at the prevention of weight gain among employees. Following the guideline development protocol of the Netherlands Society of Occupational Medicine and the Intervention Mapping protocol, the guideline was developed based on literature, interviews with relevant stakeholders, and consensus among an expert group. The guideline consists of an individual and an environmental component. The individual component includes recommendations for occupational physicians on how to promote physical activity and healthy dietary behavior based on principles of motivational interviewing. The environmental component contains an obesogenic environment assessment tool. The guideline is evaluated in a randomised controlled trial among 20 occupational physicians. Occupational physicians in the intervention group apply the guideline to eligible workers during 6 months. Occupational physicians in the control group provide care as usual. Measurements take place at baseline and 6, 12, and 18 months thereafter. Primary outcome measures include waist circumference, daily physical activity and dietary behavior. Secondary outcome measures include sedentary behavior, determinants of behavior change, body weight and body mass index, cardiovascular disease risk profile, and quality of life. Additionally, productivity, absenteeism, and cost-effectiveness are assessed. Improving workers' daily physical activity and dietary behavior may prevent weight gain and subsequently improve workers' health, increase productivity, and reduce absenteeism. After an effect- and process evaluation the guideline will be

  8. "Design for Somebody" - Approach Enabling Mobile Technology Development.

    Science.gov (United States)

    Sirkka, Andrew; Merilampi, Sari; Koivisto, Antti; Tommiska, Janika; Saarinen, Tatu-Pekka

    2017-01-01

    This paper presents case examples of Design for Somebody (DfS) philosophy used both in developing novel technologies and modifying existing main stream technologies applicable for users with special needs. DfS embodies variety of mobile technology approaches to generate personalised means to enable and motivate physical, cognitive and social skills development.

  9. Development and application of titanium alloy casting technology in China

    Directory of Open Access Journals (Sweden)

    HAN Hai

    2005-11-01

    Full Text Available The development and research of casting titanium alloy and its casting technology, especially its application in aeronautical industry in China are presented. The technology of moulding, melting and casting of titanium alloy, casting quality control are introduced. The existing problem and development trend in titanium alloy casting technology are also discussed.

  10. Development of the destruction technology for radioactive organic solid wastes

    International Nuclear Information System (INIS)

    Oh, Won Zin; Park, H.S.; Lee, K.W.

    1999-04-01

    The followings were studied through the project entitled 'Technology development for nuclear fuel cycle waste treatment'. 1. Organic waste decomposition technology development A. Destruction technology for organic wastes using Ag(2)-mediated electrochemical oxidation B. Recovery and regeneration technology for the spent chemicals used in the MEO process 2. Radioactive metal waste recycling technology A. Surface decontamination processes B. Decontamination waste treatment technology 3. Volume reduction technology nuclear fuel cycle (NFC) technology A. Estimation of the amount of radwastes and the optimum volume reduction methodology of domestic NFC B. Pretreatment of spent fuel cladding by electrochemical decontamination C. Hot cell process technology for the treatment of NFC wastes 4. Design and fabrication of the test equipment of volume reduction and reuse of alpha contaminated wastes 5. Evaluation on environmental compatibility of NFC A. Development of evaluation methodology on environmental friendliness of NFC B. Residual activity assessment of recycling wastes. (author). 321 refs., 54 tabs., 183 figs

  11. Development of the destruction technology for radioactive organic solid wastes

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Park, H.S.; Lee, K.W. [and others

    1999-04-01

    The followings were studied through the project entitled 'Technology development for nuclear fuel cycle waste treatment'. 1. Organic waste decomposition technology development A. Destruction technology for organic wastes using Ag(2)-mediated electrochemical oxidation B. Recovery and regeneration technology for the spent chemicals used in the MEO process 2. Radioactive metal waste recycling technology A. Surface decontamination processes B. Decontamination waste treatment technology 3. Volume reduction technology nuclear fuel cycle (NFC) technology A. Estimation of the amount of radwastes and the optimum volume reduction methodology of domestic NFC B. Pretreatment of spent fuel cladding by electrochemical decontamination C. Hot cell process technology for the treatment of NFC wastes 4. Design and fabrication of the test equipment of volume reduction and reuse of alpha contaminated wastes 5. Evaluation on environmental compatibility of NFC A. Development of evaluation methodology on environmental friendliness of NFC B. Residual activity assessment of recycling wastes. (author). 321 refs., 54 tabs., 183 figs.

  12. Assessing technology transfer in the Clean Development Mechanism

    OpenAIRE

    Cools, Sara Lena Yri

    2007-01-01

    This paper presents an operational definition of technology transfer, to be applied in studies of technology transfer in projects under the Kyoto Protocol’s Clean Development Mechanism (CDM). Although the CDM has never been given an explicit mandate for transferring technologies, its contribution in this respect has both been hoped for and exacted. The discussions of technology transfer in CDM projects are however blurred by widely varying conceptions of what technology transfer is. Qu...

  13. Development of a Virtual Technology Coach to Support Technology Integration for K-12 Educators

    Science.gov (United States)

    Sugar, William; van Tryon, Patricia J. Slagter

    2014-01-01

    In an effort to develop a virtual technology coach for K-12 educators, this article analyzed survey results from sixty teachers with regards to specific resources that a technology coach could provide within a virtual environment. A virtual technology coach was proposed as a possible solution to provide continual professional development for…

  14. D and D technology development program

    International Nuclear Information System (INIS)

    Hyde, J.M.

    1998-01-01

    This paper describes the content of the current program of work for the Deactivation and Decommissioning Focus Area (DDFA) located in the Office of Science and Technology (EM-50). The authors began using large-scale demonstration projects (LSDPs) in 1996 to demonstrate and test innovative decommissioning and decontamination (D and D) technologies in ongoing US Department of Energy (DOE) decommissioning projects. These LSDPs have been conducted in and are planned for different types of DOE facilities such as research and production reactors; highly enriched uranium, tritium, and plutonium processing facilities; fuel reprocessing canyons; weapons production facilities; gaseous diffusion plants; hot cells; and waste processing facilities. The concept has been to focus on addressing DOE's high-priority deactivation and decommissioning needs through the LSDP strategy. In an LSDP, the focus area demonstrates improved technologies side by side with the current baseline technologies in ongoing site decommissioning projects. This approach helps reduce the risk and liability for the DOE users associated with the first-time use of a technology and promotes creative solutions that expand the D and D tool box beyond standard practices and technologies along with other benefits. As of January 1998, more than 50 technologies have been demonstrated covering the areas of characterization, decontamination, dismantlement, waste disposition, stabilization, and health and safety

  15. EPA-developed, patented technologies available for licensing

    Data.gov (United States)

    U.S. Environmental Protection Agency — Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be...

  16. Technology Transfer: Use of Federally Funded Research and Development

    National Research Council Canada - National Science Library

    Schacht, Wendy H

    2007-01-01

    .... These applications can result from technology transfer, a process by which technology developed in one organization, in one area, or for one purpose is applied in another organization, in another...

  17. Technology development for SOI monolithic pixel detectors

    International Nuclear Information System (INIS)

    Marczewski, J.; Domanski, K.; Grabiec, P.; Grodner, M.; Jaroszewicz, B.; Kociubinski, A.; Kucharski, K.; Tomaszewski, D.; Caccia, M.; Kucewicz, W.; Niemiec, H.

    2006-01-01

    A monolithic detector of ionizing radiation has been manufactured using silicon on insulator (SOI) wafers with a high-resistivity substrate. In our paper the integration of a standard 3 μm CMOS technology, originally designed for bulk devices, with fabrication of pixels in the bottom wafer of a SOI substrate is described. Both technological sequences have been merged minimizing thermal budget and providing suitable properties of all the technological layers. The achieved performance proves that fully depleted monolithic active pixel matrix might be a viable option for a wide spectrum of future applications

  18. Noise exposure and oxidative balance in auditory and extra-auditory structures in adult and developing animals. Pharmacological approaches aimed to minimize its effects.

    Science.gov (United States)

    Molina, S J; Miceli, M; Guelman, L R

    2016-07-01

    Noise coming from urban traffic, household appliances or discotheques might be as hazardous to the health of exposed people as occupational noise, because may likewise cause hearing loss, changes in hormonal, cardiovascular and immune systems and behavioral alterations. Besides, noise can affect sleep, work performance and productivity as well as communication skills. Moreover, exposure to noise can trigger an oxidative imbalance between reactive oxygen species (ROS) and the activity of antioxidant enzymes in different structures, which can contribute to tissue damage. In this review we systematized the information from reports concerning noise effects on cell oxidative balance in different tissues, focusing on auditory and non-auditory structures. We paid specific attention to in vivo studies, including results obtained in adult and developing subjects. Finally, we discussed the pharmacological strategies tested by different authors aimed to minimize the damaging effects of noise on living beings. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Models and automation technologies for the curriculum development

    Directory of Open Access Journals (Sweden)

    V. N. Volkova

    2016-01-01

    Full Text Available The aim of the research was to determine the sequence of the curriculum development stages on the basis of the system analysis, as well as to create models and information technologies for the implementation of thesestages.The methods and the models of the systems’ theory and the system analysis, including methods and automated procedures for structuring organizational aims, models and automated procedures for organizing complex expertise.On the basis of the analysis of existing studies in the field of curriculum modeling, using formal mathematical language, including optimization models, that help to make distribution of disciplines by years and semesters in accordance with the relevant restrictions, it is shown, that the complexity and dimension of these tasks require the development of special software; the problem of defining the input data and restrictions requires a large time investment, that seems to be difficult to provide in real conditions of plans’ developing, thus it is almost impossible to verify the objectivity of the input data and the restrictions in such models. For a complete analysis of the process of curriculum development it is proposed to use the system definition, based on the system-targeted approach. On the basis of this definition the reasonable sequence of the integrated stages for the development of the curriculum was justified: 1 definition (specification of the requirements for the educational content; 2 determining the number of subjects, included in the curriculum; 3 definition of the sequence of the subjects; 4 distribution of subjects by semesters. The models and technologies for the implementation of these stages of curriculum development were given in the article: 1 models, based on the information approach of A.Denisov and the modified degree of compliance with objectives based on Denisov’s evaluation index (in the article the idea of evaluating the degree of the impact of disciplines for realization

  20. Recent developments in optical neuromodulation technologies

    NARCIS (Netherlands)

    Kos, A.; Loohuis, N.F.; Glennon, J.C.; Celikel, T.; Martens, G.J.M.; Tiesinga, P.H.E.; Aschrafi, A.

    2013-01-01

    The emergence of optogenetics technology facilitated widespread applications for interrogation of complex neural networks, such as activation of specific axonal pathways, previously found impossible with electrical stimulation. Consequently, within the short period of its application in neuroscience

  1. Development of Technology Transfer Economic Growth Metrics

    Science.gov (United States)

    Mastrangelo, Christina M.

    1998-01-01

    The primary objective of this project is to determine the feasibility of producing technology transfer metrics that answer the question: Do NASA/MSFC technical assistance activities impact economic growth? The data for this project resides in a 7800-record database maintained by Tec-Masters, Incorporated. The technology assistance data results from survey responses from companies and individuals who have interacted with NASA via a Technology Transfer Agreement, or TTA. The goal of this project was to determine if the existing data could provide indications of increased wealth. This work demonstrates that there is evidence that companies that used NASA technology transfer have a higher job growth rate than the rest of the economy. It also shows that the jobs being supported are jobs in higher wage SIC codes, and this indicates improvements in personal wealth. Finally, this work suggests that with correct data, the wealth issue may be addressed.

  2. Distance technology transfer course content development.

    Science.gov (United States)

    2013-06-01

    The Illinois Department of Transportation (IDOT) offers multiple technology transfer courses for engineering, : project design, and safety training for state and local agency personnel. These courses are often essential to the : agency mission. Becau...

  3. Information Technology Research & Development Foresight in Iran.

    Directory of Open Access Journals (Sweden)

    Mansoor Sheydaee

    2017-09-01

    The results of the Delphi process was reported in national level, including Delphi panel members demography, public questions and specialized questions for each of the technologies. Finally the research provides some recommendations for decision makers.

  4. Energy technology transfer to developing countries

    International Nuclear Information System (INIS)

    Goldemberg, J.

    1991-01-01

    This paper gives some examples of how technology transfer can successfully be given to third world countries to allow them to benefit in their quest for economic growth and better standards of living through reduced energy consumption and environmental pollution. It also suggests methods by which obstacles such as high investment costs, lack of information, market demand, etc., can be overcome in order to motivate technological transfer by industrialized countries

  5. Modelling architectures in multi-product oriented technology development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir

    This thesis investigates the use of architecture modelling in a technology development context.This context presents greater uncertainties than more mature new product development. Applications—the use of products based on the technology being developed—are not fully identified and the requiremen...... frameworks in a technology development projectare presented, along with descriptive results on the context of technology development gained through active participation in the case project.......This thesis investigates the use of architecture modelling in a technology development context.This context presents greater uncertainties than more mature new product development. Applications—the use of products based on the technology being developed—are not fully identified and the requirements...... to be fulfilled are not completely defined.The products to be based on the technology are yet to be developed as the foundation for their development will be developed during the technology development. Furthermore, the production of a new technology is not defined as both the technology and derivative products...

  6. MARKETING TECHNOLOGIES AS AN INSTRUMENT FOR EFFICIENT DEVELOPMENT OF DOMESTIC ENTERPRISES

    Directory of Open Access Journals (Sweden)

    V. Svyatnenko

    2014-09-01

    Full Text Available The paper investigates the essence and characteristics of marketing technologies, necessity of their use in domestic enterprises in conditions of competition. The problems of interpretation of the term "marketing techniques", their species and main characteristics are examined. The aim of the article is to research roles marketing technologies in ensuring the effective development of domestic enterprises in modern conditions.

  7. Manufacturing capability as a technological development indicator in the pharmaceutical industry

    OpenAIRE

    John Jairo Gallo Castro; Bibiana Margarita Vallejo Díaz; Clara Eugenia Plazas Bonilla

    2010-01-01

    The pharmaceutical industrial has five subsectors: medicines, cosmetics, phytotherapeutics, cleaning products and medical devices. The medicine subsector consists of organisations producing, importing and selling these products. Most studies about this industry have been guided by economic interests without assessing technological aspects of production. This article was aimed at proposing a methodology for assessing and describing the medicine sector according to its technological development...

  8. Development of hydrogen, alcohol and biomass technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This paper describes verification tests on fuel conversion to methanol for oil-fired thermal power plants. Methanol is a liquid in normal temperatures, easy to transport and store, clean and affluent in raw material availability, such as natural gas and coal. High-efficiency refuse power generation uses refuses having been made high in calories, produces high temperature and pressure steam stably, and aims at high-efficiency power generation. In manufacturing high-efficiency methane gas, general refuses having been removed of non-combustible materials such as metals are solubilized, and then methane fermentation is carried out to recover energy as methane and give waste water a high-level treatment at the same time. The paper also describes joint researches with developing countries on simplified purification systems for industrial waste water by using anaerobic treatment. Discussions have been given on low-temperature crushing and sorting of wastes from large-size household electric appliances to re-utilize them and recover energy therefrom. Discussions have also been given on new methods for manufacturing methanol for fuel, such as an air-phase fluidized bed method that achieves cost reduction by means of upsizing, and a low-temperature liquid phase method which simplifies manufacturing facilities. Descriptions are given also on a global-scale utilization system for hydrogen electrolyzed by using hydraulic power and solar power. 8 figs., 6 tabs.

  9. Impact of lifestyle and technology developments on sleep

    Directory of Open Access Journals (Sweden)

    Shochat T

    2012-03-01

    Full Text Available Tamar ShochatDepartment of Nursing, Faculty of Social Welfare and Health Sciences, University of Haifa, Haifa, IsraelAbstract: Although the physiological and psychological mechanisms involved in the development of sleep disorders remain similar throughout history, factors that potentiate these mechanisms are closely related to the "zeitgeist", ie, the sociocultural, technological and lifestyle trends which characterize an era. Technological advancements have afforded modern society with 24-hour work operations, transmeridian travel and exposure to a myriad of electronic devices such as televisions, computers and cellular phones. Growing evidence suggests that these advancements take their toll on human functioning and health via their damaging effects on sleep quality, quantity and timing. Additional behavioral lifestyle factors associated with poor sleep include weight gain, insufficient physical exercise and consumption of substances such as caffeine, alcohol and nicotine. Some of these factors have been implicated as self-help aids used to combat daytime sleepiness and impaired daytime functioning. This review aims to highlight current lifestyle trends that have been shown in scientific investigations to be associated with sleep patterns, sleep duration and sleep quality. Current understanding of the underlying mechanisms of these associations will be presented, as well as some of the reported consequences. Available therapies used to treat some lifestyle related sleep disorders will be discussed. Perspectives will be provided for further investigation of lifestyle factors that are associated with poor sleep, including developing theoretical frameworks, identifying underlying mechanisms, and establishing appropriate therapies and public health interventions aimed to improve sleep behaviors in order to enhance functioning and health in modern society.Keywords: sleep, technology, lifestyle, behavior

  10. Information technology research and development critical trends and issues

    CERN Document Server

    1985-01-01

    Information Technology Research and Development: Critical Trends and Issues is a report of the Office of Technology Assessment of the United States Government on the research and development in the area of information technology. The report discusses information technology research and development - its goals, nature, issues, and strategies; environment and its changes; the roles of the participants; and the health of its field. The book then goes on to four selected case studies in information technology: advanced computer architecture; fiber optic communications; software engineering; and ar

  11. Development of Welding and Hardfacing Technology: challenges for ASTRID project

    International Nuclear Information System (INIS)

    Marlaud, T.; Bonnot, A-F.; Pierron, D.; Forest, L.; Blat-Yrieix, M.; Mathieu, J-P.; Blanc, M.

    2015-01-01

    The purpose of this article is to present the challenges for welding and hardfacing technology involved by sodium fast breeder reactors and by ASTRID specificities. To meet with compromises between achieving good ductility properties (toughness, impact, elongation…) and room/high temperature mechanical resistance (creep, strength…) in welds, as ensuring metallurgical (solidification cracking) and process weldability, the development of specific welding filler consumables for materials used in the creep conditions is needed. The developments deal with the candidate materials (316L(N), Grade 91) and integrate a qualification approach to aim at achiving a robust manufacturing. Contact zones in FBR sodium environment are subjected to various solicitations (high temperature, severe contact pressure, cycling…). When subjected to radiation, hardfacing alternatives to traditional cobalt base coatings depend on the application are required. The approach to evaluate the performance of alternative solutions, through an experimental program, will be presented. (author)

  12. Systems engineering identification and control of mixed waste technology development

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1997-01-01

    The Department of Energy (DOE) established the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop technologies required to meet the Department's commitments for treatment of mixed low-level and transuranic wastes. Waste treatment includes all necessary steps from generation through disposal. Systems engineering was employed to reduce programmatic risk, that is, risk of failure to meet technical commitments within cost and schedule. Customer needs (technology deficiencies) are identified from Site Treatment Plans, Consent Orders, ten year plans, Site Technical Coordinating Groups, Stakeholders, and Site Visits. The Technical Baseline, a prioritized list of technology deficiencies, forms the basis for determining which technology development activities will be supported by the MWFA. Technology Development Requirements Documents are prepared for each technology selected for development. After technologies have been successfully developed and demonstrated, they are documented in a Technology Performance Report. The Technology Performance Reports are available to any of the customers or potential users of the technology, thus closing the loop between problem identification and product development. This systematic approach to technology development and its effectiveness after 3 years is discussed in this paper

  13. Development of system integration technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Moon Hee; Kang, D. J.; Kim, K. K. and others

    1999-03-01

    The objective of this report is to integrate the conceptual design of an integral reactor, SMART producing thermal energy of 330 MW, which will be utilized to supply energy for seawater desalination and small-scale power generation. This project also aims to develop system integration technology for effective design of the reactor. For the conceptual design of SMART, preliminary design requirements including the top-tier requirements and design bases were evaluated and established. Furthermore, in the view of the application of codes and standards to the SMART design, existing laws, codes and standards were analyzed and evaluated with respect to its applicability. As a part of this evaluation, directions and guidelines were proposed for the development of new codes and standards which shall be applied to the SMART design. Regarding the integration of SMART conceptual designs, major design activities and interfaces between design departments were established and coordinated through the design process. For the effective management of all design schedules, a work performance evaluation system was developed and applied to the design process. As the results of this activity, an integrated output of SMART designs was produced. Two additional scopes performed in this project include the preliminary economic analysis on the SMART utilization for seawater desalination, and the planning of verification tests for technology implemented into SMART and establishing development plan of the computer codes to be used for SMART design in the next phase. The technical cooperation with foreign country and international organization for securing technologies for integral reactor design and its application was coordinated and managed through this project. (author)

  14. The Tipping Points of Technology Development

    Directory of Open Access Journals (Sweden)

    Tauno Kekäle

    2014-07-01

    Full Text Available The tipping point, the decisive point in time in the competition between old and new, is an interesting phenomenon in physics of today. This aspect in technology acceptance is connected to many business decisions such as technology investments, product releases, resource allocation, sales forecasts and, ultimately, affects the profitability and even survival of a company. The tipping point itself is based on many stochastic and dynamic variables, and the process may at least partly be described as path-dependent. This paper analyses the tipping point from three aspects: (1 product performance, (2 features of the market and infrastructure (including related technologies and human network externalities, and (3 actions of the incumbents (including customer lock-in, systems lock-in, and sustaining innovation. The paper is based on the Bass s-curve idea and the technology trajectory concept proposed by Dosi. Three illustrative cases are presented to make the point of the multiple factors affecting technology acceptance and, thus, the tipping point. The paper also suggests outlines for further research in field of computer simulation.

  15. Development and in situ application of an adjustable aiming device to guide extra- to intraarticular tibial tunnel drilling for the insertion of the cranial cruciate ligament in dogs.

    Science.gov (United States)

    Winkels, Philipp; Werner, Hinnerk; Grevel, Vera; Oechtering, Gerhard; Böttcher, Peter

    2010-04-01

    To develop and test an arthroscopic aiming device for extra- to intraarticular tibial tunnel drilling emerging at the center of the tibial insertion (CenterTib) of the cranial cruciate ligament (CCL) in medium to large breed dogs. Descriptive experimental study. Fifty-two cadaveric hind limbs of dogs >or=20 kg BW. The mediolateral position and craniocaudal position (ccPos) of CenterTib in relation to the caudomedial meniscotibial ligament were measured on photographs of 46 dissected tibial plateaus. The proximal tibial depth (TibDepth) was determined on lateral radiographs and its correlation with ccPos was assessed using linear regression analysis. Extra- to intraarticular arthroscopic tibial tunnel drilling was performed in 6 independent cadaveric stifles. A C-guide with an adjustable craniocaudal offset was constructed and adjusted according to ccPos estimated based on TibDepth. The position of the resulting bone tunnels was compared with the position of the CenterTib. Pearson's correlation between TibDepth and ccPos was strong (R=0.86; P<.001). ccPos (y) as a function of TibDepth (x) can be expressed as y=-4.8+0.3x. Arthroscopic tunnel drilling resulted in a median deviation of the drill tunnels around the CenterTib of 1 mm. The regression equation and aiming device permit localization and targeting of CenterTib during extra- to intraarticular tibial bone tunnel drilling in vitro. The proposed technique may reduce tibial tunnel misplacement when performing intraarticular CCL repair using a tibial bone tunnel.

  16. Key policy considerations for facilitating low carbon technology transfer to developing countries

    International Nuclear Information System (INIS)

    Ockwell, David G.; Watson, Jim; MacKerron, Gordon; Pal, Prosanto; Yamin, Farhana

    2008-01-01

    Based on Phase I of a UK-India collaborative study, this paper analyses two case studies of low carbon technologies-hybrid vehicles and coal-fired power generation via integrated gasification combined cycle (IGCC). The analysis highlights the following six key considerations for the development of policy aimed at facilitating low carbon technology transfer to developing countries: (1) technology transfer needs to be seen as part of a broader process of sustained, low carbon technological capacity development in recipient countries; (2) the fact that low carbon technologies are at different stages of development means that low carbon technology transfer involves both vertical transfer (the transfer of technologies from the R and D stage through to commercialisation) and horizontal transfer (the transfer from one geographical location to another). Barriers to transfer and appropriate policy responses often vary according to the stage of technology development as well as the specific source and recipient country contexts; (3) less integrated technology transfer arrangements, involving, for example, acquisition of different items of plant from a range of host country equipment manufacturers, are more likely to involve knowledge exchange and diffusion through recipient country economies; (4) recipient firms that, as part of the transfer process, strategically aim to obtain technological know-how and knowledge necessary for innovation during the transfer process are more likely to be able to develop their capacity as a result; (5) whilst access to Intellectual Property Rights (IPRs) may sometimes be a necessary part of facilitating technology transfer, it is not likely to be sufficient in itself. Other factors such as absorptive capacity and risks associated with new technologies must also be addressed; (6) there is a central role for both national and international policy interventions in achieving low carbon technology transfer. The lack of available empirical analysis

  17. Technology developments for Japanese BWR MOX fuel utilization

    International Nuclear Information System (INIS)

    Oguma, M.; Mochida, T.; Nomata, T.; Asahi, K.

    1997-01-01

    The Long-Term Program for Research, Development and Utilization of Nuclear Energy established by the Atomic Energy Commission of Japan asserts that Japan will promote systematic utilization of MOX fuel in LWRs. Based on this Japanese nuclear energy policy, we have been pushing development of MOX fuel technology aimed at future full scale utilization of this fuel in BWRs. In this paper, the main R and D topics are described from three subject areas, MOX core and fuel design, MOX fuel irradiation behaviour, and MOX fuel fabrication technology. For the first area, we explain the compatibility of MOX fuel with UO 2 core, the feasibility of the full MOX core, and the adaptability of MOX design methods based on a mock-up criticality experiment. In the second, we outline the Tsuruga MOX irradiation program and the DOMO program, and suggest that MOX fuel behaviour is comparable to ordinary BWR UO 2 fuel behaviour. In the third, we examine the development of a fully automated MOX bundle assembling apparatus and its features. (author). 14 refs, 11 figs, 3 tabs

  18. Development of blanket box structure fabrication technology

    International Nuclear Information System (INIS)

    Mohri, K.; Sato, S.; Kawaguchi, I.; Sato, K.; Kuroda, T.; Hashimoto, T.; Sato, S.; Takatsu, H.

    1995-01-01

    Fabrication studies have been performed for the first wall and blanket box structure in the fusion experimental reactor designed in Japan. The hot isostatic pressing technique has been proposed as one of the most promising candidate methods for fabricating the first wall. This paper describes the trial fabrication of a half-scale mock-up for part of an outboard module near the midplane, without the internal structure of a breeding region, to investigate its feasibility and to clarify technological issues associated with the proposed fabrication technologies. (orig.)

  19. Scientific projection paper for cluster B: technology development

    International Nuclear Information System (INIS)

    Sinclair, W.K.

    1980-01-01

    This section deals with new technology developments in fields primarily concerned with dose reduction and matters relating to radiation protection rather than toward technology developments that might enhance the beneficial uses of ionizing radiation, except for the consideration of diagnostic techniques which may result in alternatives to ionizing radiation. Three major areas have been identified in which progress can be made via technology development: diagnostic radiology, occupational exposure and exposure of the public to radioactivity

  20. Beyond High-Fidelity Simulation: Emerging Technologies in Leadership Development.

    Science.gov (United States)

    Bleich, Michael R; Jackson, Christina; Werner, Stacy H; Hines, Diana; Stuart, Nancy; Nelson, Alison

    2018-03-01

    Technology offers educators active learning and new teaching strategies. Five lower cost and scalable technology applications are presented as alternative or complement to high-fidelity simulation. Professional nurse educators should adopt technology when teaching and interact with vendors to generate real-world applications that advance development. J Contin Educ Nurs. 2018;49(3):105-108. Copyright 2018, SLACK Incorporated.