WorldWideScience

Sample records for technology control regime

  1. Impact of Export Control and Technology Transfer Regimes: International Perspectives

    Science.gov (United States)

    2012-01-07

    Iranians seeking fighter aircraft from Russia and China, but none of these initiatives have yet borne fruit (“Islamic Republic of Iran Air Force...and added to its range. A most important modification was to replace the computer-assisted control system of the YF-17 with a digital fly -by-wire...possible, their role essentially is that of customer rather than partner. Figure 1. Lifecycle Framework View Matters such as the location of the

  2. A European Dilemma: The EU Export Control Regime on Dual-Use Goods and Technologies

    Directory of Open Access Journals (Sweden)

    Alavi Hamed

    2016-09-01

    Full Text Available Export controls for dual-use items are an important constituent element of both the security policies of state exporters and WMD non-proliferation efforts. Dual-use goods and technologies can be used for both civil and military purposes, which requires careful oversight over their export to countries that are considered unfriendly or have ambiguous foreign policy attitudes. By their very nature, dual-use items may be used both to further legitimate ends, like promoting technological development and strengthening economic ties, and to aid in unwarranted acts. State exporters are faced with the responsibility of balancing the security objectives pertaining to exports of dual-use items with the competitiveness of local economies. The paper discusses the EU export control regime and EU membership in international export control groups. In doing so, comparative and normative research methods are chosen to analyze existing literature on Council Regulation 428/2009 and other international export control groups, including the Wassenaar Arrangement, the Missile Technology Control Regime (MTCR, the Australia Group (AG and the Nuclear Suppliers Group (NSG. The paper will conclude by identifying shortcomings and addressing possible amendments to the regulation.

  3. How does technological regime affect performance of technology development projects?

    NARCIS (Netherlands)

    Song, Michael; Hooshangi, Soheil; Zhao, Y. Lisa; Halman, Johannes I.M.

    2014-01-01

    In this study, we examine how technological regime affects the performance of technology development projects (i.e., project quality, sales, and profit). Technological regime is defined as the set of attributes of a technological environment where the innovative activities of firms take place.

  4. Are Some Technologies Beyond Regulatory Regimes?

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Wendell B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kusnezov, Dimitri [National Nuclear Security Administration (NNSA), Washington, DC (United States)

    2017-08-01

    Regulatory frameworks are a common tool in governance to incent and coerce behaviors supporting national or strategic stability. This includes domestic regulations and international agreements. Though regulation is always a challenge, the domain of fast evolving threats, like cyber, are proving much more difficult to control. Many discussions are underway searching for approaches that can provide national security in these domains. We use game theoretic learning models to explore the question of strategic stability with respect to the democratization of certain technologies (such as cyber). We suggest that such many-player games could inherently be chaotic with no corresponding (Nash) equilibria. In the absence of such equilibria, traditional approaches, as measures to achieve levels of overall security, may not be suitable approaches to support strategic stability in these domains. Altogether new paradigms may be needed for these issues. At the very least, regulatory regimes that fail to address the basic nature of the technology domains should not be pursued as a default solution, regardless of success in other domains. In addition, the very chaotic nature of these domains may hold the promise of novel approaches to regulation.

  5. Negotiating a regime to control global warming

    International Nuclear Information System (INIS)

    Sebenius, J.K.

    1991-01-01

    For purposes of analysis, this paper has uncritically maintained that the prospect of a serious climate problem exists and has only lightly examined the broader advantages and drawbacks of various proposed policy and institutional responses. Crucial as they are to a full treatment of the issues, these underlying substantive and policy questions enter the analysis primarily insofar as they affect the likely outcomes of pending and potential negotiations. To an advocate of a new greenhouse control regime, the fundamental negotiating task is to craft and sustain a meaningful winning coalition of countries backing such a regime. Two centrally necessary conditions for the fundamental task are: (1) that each member of the coalition see enough gain in the regime relative to the alternatives to adhere and (2) the potential and actual blocking coalitions of interests opposed to the regime be prevented from forming and from being acceptably accommodated or otherwise neutralized. The analysis of this paper is organized around key questions whose answers will influence whether and how these two necessary conditions might (or might not) be met

  6. Environmental controls on food web regimes: A fluvial perspective

    Science.gov (United States)

    Power, Mary E.

    2006-02-01

    Because food web regimes control the biomass of primary producers (e.g., plants or algae), intermediate consumers (e.g., invertebrates), and large top predators (tuna, killer whales), they are of societal as well as academic interest. Some controls over food web regimes may be internal, but many are mediated by conditions or fluxes over large spatial scales. To understand locally observed changes in food webs, we must learn more about how environmental gradients and boundaries affect the fluxes of energy, materials, or organisms through landscapes or seascapes that influence local species interactions. Marine biologists and oceanographers have overcome formidable challenges of fieldwork on the high seas to make remarkable progress towards this goal. In river drainage networks, we have opportunities to address similar questions at smaller spatial scales, in ecosystems with clear physical structure and organization. Despite these advantages, we still have much to learn about linkages between fluxes from watershed landscapes and local food webs in river networks. Longitudinal (downstream) gradients in productivity, disturbance regimes, and habitat structure exert strong effects on the organisms and energy sources of river food webs, but their effects on species interactions are just beginning to be explored. In fluid ecosystems with less obvious physical structure, like the open ocean, discerning features that control the movement of organisms and affect food web dynamics is even more challenging. In both habitats, new sensing, tracing and mapping technologies have revealed how landscape or seascape features (e.g., watershed divides, ocean fronts or circulation cells) channel, contain or concentrate organisms, energy and materials. Field experiments and direct in situ observations of basic natural history, however, remain as vital as ever in interpreting the responses of biota to these features. We need field data that quantify the many spatial and temporal scales of

  7. Induction thermoelastic actuator with controllable operation regime

    Czech Academy of Sciences Publication Activity Database

    Doležel, Ivo; Kotlan, V.; Krónerová, E.; Ulrych, B.

    2010-01-01

    Roč. 29, č. 4 (2010), s. 1004-1014 ISSN 0332-1649 R&D Projects: GA ČR GA102/09/1305 Institutional research plan: CEZ:AV0Z20570509 Keywords : control of position * thermoelastic actuator * electromagnetic field Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.386, year: 2010 www.emeraldinsight.com/compel.htm

  8. Control of Synchronization Regimes in Networks of Mobile Interacting Agents

    Science.gov (United States)

    Perez-Diaz, Fernando; Zillmer, Ruediger; Groß, Roderich

    2017-05-01

    We investigate synchronization in a population of mobile pulse-coupled agents with a view towards implementations in swarm-robotics systems and mobile sensor networks. Previous theoretical approaches dealt with range and nearest-neighbor interactions. In the latter case, a synchronization-hindering regime for intermediate agent mobility is found. We investigate the robustness of this intermediate regime under practical scenarios. We show that synchronization in the intermediate regime can be predicted by means of a suitable metric of the phase response curve. Furthermore, we study more-realistic K -nearest-neighbor and cone-of-vision interactions, showing that it is possible to control the extent of the synchronization-hindering region by appropriately tuning the size of the neighborhood. To assess the effect of noise, we analyze the propagation of perturbations over the network and draw an analogy between the response in the hindering regime and stable chaos. Our findings reveal the conditions for the control of clock or activity synchronization of agents with intermediate mobility. In addition, the emergence of the intermediate regime is validated experimentally using a swarm of physical robots interacting with cone-of-vision interactions.

  9. Process-based humidity control regime for greenhouse crops

    NARCIS (Netherlands)

    Korner, O.; Challa, H.

    2003-01-01

    Modern greenhouses in The Netherlands are designed for efficient use of energy. Climate control traditionally aims at optimal crop performance. However, energy saving is a major issue for the development of new temperature regimes. Temperature integration (TI) results in fluctuating and often high

  10. The identification of technology regimes in banking : Implications for the market power-fragility nexus

    NARCIS (Netherlands)

    Koetter, M.; Poghosyan, T.

    Neglecting the existence of different technologies in banking can contaminate efficiency, market power, and other performance measures. By simultaneously estimating (i) technology regimes conditional on exogenous factors, (ii) efficiency conditional on risk management, and (iii) Lerner indices of

  11. Neural network based adaptive control for nonlinear dynamic regimes

    Science.gov (United States)

    Shin, Yoonghyun

    Adaptive control designs using neural networks (NNs) based on dynamic inversion are investigated for aerospace vehicles which are operated at highly nonlinear dynamic regimes. NNs play a key role as the principal element of adaptation to approximately cancel the effect of inversion error, which subsequently improves robustness to parametric uncertainty and unmodeled dynamics in nonlinear regimes. An adaptive control scheme previously named 'composite model reference adaptive control' is further developed so that it can be applied to multi-input multi-output output feedback dynamic inversion. It can have adaptive elements in both the dynamic compensator (linear controller) part and/or in the conventional adaptive controller part, also utilizing state estimation information for NN adaptation. This methodology has more flexibility and thus hopefully greater potential than conventional adaptive designs for adaptive flight control in highly nonlinear flight regimes. The stability of the control system is proved through Lyapunov theorems, and validated with simulations. The control designs in this thesis also include the use of 'pseudo-control hedging' techniques which are introduced to prevent the NNs from attempting to adapt to various actuation nonlinearities such as actuator position and rate saturations. Control allocation is introduced for the case of redundant control effectors including thrust vectoring nozzles. A thorough comparison study of conventional and NN-based adaptive designs for a system under a limit cycle, wing-rock, is included in this research, and the NN-based adaptive control designs demonstrate their performances for two highly maneuverable aerial vehicles, NASA F-15 ACTIVE and FQM-117B unmanned aerial vehicle (UAV), operated under various nonlinearities and uncertainties.

  12. Computer Language Choices in Arms Control and Nonproliferation Regimes

    International Nuclear Information System (INIS)

    White, G K

    2005-01-01

    The U.S. and Russian Federation continue to make substantive progress in the arms control and nonproliferation transparency regimes. We are moving toward an implementation choice for creating radiation measurement systems that are transparent in both their design and in their implementation. In particular, the choice of a programming language to write software for such regimes can decrease or significantly increase the costs of authentication. In this paper, we compare procedural languages with object-oriented languages. In particular, we examine the C and C++ languages; we compare language features, code generation, implementation details, and executable size and demonstrate how these attributes aid or hinder authentication and backdoor threats. We show that programs in lower level, procedural languages are more easily authenticated than are object-oriented ones. Potential tools and methods for authentication are covered. Possible mitigations are suggested for using object-oriented programming languages

  13. Control of satellite imaging formations in multi-body regimes

    Science.gov (United States)

    Howell, Kathleen C.; Millard, Lindsay D.

    2009-03-01

    Libration point orbits may be ideal locations for satellite imaging formations. Therefore, control of these arrays in multi-body regimes is critical. A continuous feedback control algorithm is developed that maintains a formation of satellites in motion that is bounded relative to a halo orbit. This algorithm is derived based on the dynamic characteristics of the phase space near periodic orbits in the circular restricted three-body problem (CR3BP). By adjusting parameters of the control algorithm appropriately, satellites in the formation follow trajectories that are particularly advantageous to imaging arrays. Image reconstruction and coverage of the ( u, v) plane are simulated for interferometric satellite configurations, demonstrating potential applications of the algorithm and the resulting motion.

  14. Hydroperiod regime controls the organization of plant species in wetlands.

    Science.gov (United States)

    Foti, Romano; del Jesus, Manuel; Rinaldo, Andrea; Rodriguez-Iturbe, Ignacio

    2012-11-27

    With urban, agricultural, and industrial needs growing throughout the past decades, wetland ecosystems have experienced profound changes. Most critically, the biodiversity of wetlands is intimately linked to its hydrologic dynamics, which in turn are being drastically altered by ongoing climate changes. Hydroperiod regimes, e.g., percentage of time a site is inundated, exert critical control in the creation of niches for different plant species in wetlands. However, the spatial signatures of the organization of plant species in wetlands and how the different drivers interact to yield such signatures are unknown. Focusing on Everglades National Park (ENP) in Florida, we show here that cluster sizes of each species follow a power law probability distribution and that such clusters have well-defined fractal characteristics. Moreover, we individuate and model those signatures via the interplay between global forcings arising from the hydroperiod regime and local controls exerted by neighboring vegetation. With power law clustering often associated with systems near critical transitions, our findings are highly relevant for the management of wetland ecosystems. In addition, our results show that changes in climate and land management have a quantifiable predictable impact on the type of vegetation and its spatial organization in wetlands.

  15. THE FISCAL ANTI-FRAUD CONTROL. LEGAL REGIME

    Directory of Open Access Journals (Sweden)

    Rada POSTOLACHE

    2014-05-01

    Full Text Available The fiscal anti-fraud control has been regulated quite recently, by the Government Emergency Ordinance No. 74/2013, adopted in the context of the implementation of the “Project for the modernization of the fiscal administration” and the intensification of the fight against tax evasion. On the basis of the legal norms applying to it, of specialized doctrine and legal literature, the present work aims to approach fiscal control from various perspectives – organization, enforcement and definition of legal accountability – so as to point at the same time its specific forms, in relation to other similar control forms. Moreover, the present work will also analyse the novelty elements which the law brings, so as to create a specific technical support for the authorities, regarding those case laws having as object the economic-financial frauds. The current study aims to delineate the legal regime of this control form, which we consider a specialized activity, organized within the National Agency of Fiscal Administration and performed with the specific target of control, so as to prevent, acknowledge and fight tax evasion. At the same time, the present study is useful under the present circumstances, in which fiscal fraud has become more intense, becoming a phenomenon, but also because fiscal fraud has incidence upon other field of economic and financial interest.

  16. Modeling of dialogue regimes of distance robot control

    Science.gov (United States)

    Larkin, E. V.; Privalov, A. N.

    2017-02-01

    Process of distance control of mobile robots is investigated. Petri-Markov net for modeling of dialogue regime is worked out. It is shown, that sequence of operations of next subjects: a human operator, a dialogue computer and an onboard computer may be simulated with use the theory of semi-Markov processes. From the semi-Markov process of the general form Markov process was obtained, which includes only states of transaction generation. It is shown, that a real transaction flow is the result of «concurrency» in states of Markov process. Iteration procedure for evaluation of transaction flow parameters, which takes into account effect of «concurrency», is proposed.

  17. Transparencies used in describing the CTBT verification regime and its four monitoring technologies

    International Nuclear Information System (INIS)

    Basham, P.

    1999-01-01

    This presentation includes description of the CTBT verification regime and its four monitoring technologies, (namely, seismic monitoring, hydro acoustic monitoring, infrasound monitoring and radionuclides monitoring) CTBT global verification system, sequence of steps needed for installing an international monitoring system station which includes: site survey, site preparation and construction, equipment procurement and installation, final tests and certification

  18. Dynamical regimes due to technological change in a microeconomical model of production.

    Science.gov (United States)

    Hamacher, K

    2012-09-01

    We develop a microeconomical model to investigate the impact of technological change onto production decisions of suppliers-modeling an effective feedback mechanism of the market. An important property-the time horizon of production planning-is related to the Kolmogorov entropy of the one-dimensional maps describing price dynamics. We simulate this price dynamics in an ensemble representing the whole macroeconomy. We show how this model can be used to support ongoing research in economic growth and incorporate the obtained microeconomic findings into the discussion about appropriate macroeconomic quantities such as the production function-thus effectively underpinning macroeconomics with microeconomical dynamics. From there we can show that the model exhibits different dynamical regimes (suggesting "phase transitions") with respect to an order parameter. The non-linear feedback under technological change was found to be the crucial mechanism. The implications of the obtained regimes are finally discussed.

  19. Dynamical regimes due to technological change in a microeconomical model of production

    Science.gov (United States)

    Hamacher, K.

    2012-09-01

    We develop a microeconomical model to investigate the impact of technological change onto production decisions of suppliers—modeling an effective feedback mechanism of the market. An important property—the time horizon of production planning—is related to the Kolmogorov entropy of the one-dimensional maps describing price dynamics. We simulate this price dynamics in an ensemble representing the whole macroeconomy. We show how this model can be used to support ongoing research in economic growth and incorporate the obtained microeconomic findings into the discussion about appropriate macroeconomic quantities such as the production function—thus effectively underpinning macroeconomics with microeconomical dynamics. From there we can show that the model exhibits different dynamical regimes (suggesting "phase transitions") with respect to an order parameter. The non-linear feedback under technological change was found to be the crucial mechanism. The implications of the obtained regimes are finally discussed.

  20. Continental Scientific Drilling (CSD): Technology Barriers to Deep Drilling Studies in Thermal Regimes

    Energy Technology Data Exchange (ETDEWEB)

    Kolstad, George A.; Rowley, John C.

    1987-01-16

    This report is the proceedings of a workshop. The primary thrust of these discussion was to identify the major key technology barriers to the Department of Energy (DOE) supported Thermal Regimes CSD projects and to set priorities for research and development. The major technological challenge is the high temperature to be encountered at depth. Specific problems derived from this issue were widely recognized among the participants and are reflected in this summary. A major concern for the projected Thermal Regimes CSD boreholes was the technology required for continuous coring, in contrast to that required for drilling without core or spot coring. Current commercial technology bases for these two techniques are quite different. The DOE has successfully fielded projects that used both technologies, i.e, shallow continuous coring (Inyo Domes and Valles Caldera) and deeper drilling with spot cores (Imperial Valley-SSSDP). It was concluded that future scientific objectives may still require both approaches, but continuous coring is the most likely requirement in the near term. (DJE-2005)

  1. 78 FR 42430 - Revisions to the Export Administration Regulations Based on the 2012 Missile Technology Control...

    Science.gov (United States)

    2013-07-16

    ... Administration Regulations (EAR) to reflect changes to the Missile Technology Control Regime (MTCR) Annex that.... 130104008-3008-01] RIN 0694-AF81 Revisions to the Export Administration Regulations Based on the 2012 Missile Technology Control Regime Plenary Agreements AGENCY: Bureau of Industry and Security, Commerce...

  2. 75 FR 20520 - Revisions to the Export Administration Regulations Based on the 2009 Missile Technology Control...

    Science.gov (United States)

    2010-04-20

    ... Administration Regulations (EAR) to reflect changes to the Missile Technology Control Regime (MTCR) Annex that.... 0912031426-0047-01] RIN 0694-AE79 Revisions to the Export Administration Regulations Based on the 2009 Missile Technology Control Regime Plenary Agreements AGENCY: Bureau of Industry and Security, Commerce...

  3. Environmental control technology

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    During this report period, Chem Tech identified environmental control technology (ECT) as an area of emphasis for future planning and resource allocation. The Division plans to continue to perform R and D activities in ECT for external sponsors such as the DOE Office of Fossil Energy (DOE/FE), the Electric Power Research Institute (EPRI), and the Environmental Protection Agency (EPA) while striving for recognition as an R and D center for ECT within the Martin Marietta Energy Systems' Complex. Chem Tech has already played supporting roles in this area for the Y-12 Plant and the Oak Ridge Gaseous Diffusion Plant (ORGDP) and is currently expanding its support to organizations within ORNL responsible for environmental matters. Over the long term, the Division hopes to achieve recognition as a center for R and D in ECT within the wider DOE system. Recent initiatives supporting these plans are discussed below

  4. Poverty Alleviation and Environmental Sustainability through Improved Regimes of Technology Transfer

    Directory of Open Access Journals (Sweden)

    Klaus Bosselmann

    2006-06-01

    Full Text Available To achieve the Millennium Development Goals, international technology transfer can play a major role for poverty alleviation and environmental sustainability. At present, there are economic, social and legal (rather than technical barriers preventing the transfer of environmentally sound technology (EST from a wider use in international regimes. Removing these barriers requires greater political and regulatory efforts both domestically and internationally. To enable EST transfer, developed States need to improve domestic market conditions such as removal of negative subsidies and barriers to foreign investment, targeted fiscal incentives and law reforms favouring sustainable production and use of energy. There is no realistic perspective for international EST transfer as long as it is disadvantaged domestically. A coherent EST transfer regime is only possible through greater governmental intervention at the national and international level, including environmental regulations, national systems of innovation, and creating an enabling environment for EST. Such intervention should include effective public-private partnerships, both within and between States. Partnerships, if guided by law, could ensure EST innovation more efficiently than purely State-driven or market-driven EST transfers. In search for a model, the EST transfer regime under the Vienna Ozone Layer Convention and the Montreal Protocol deserves recognition. For example, the clean development mechanism under the Kyoto Protocol allows for considerable scope for EST transfer. The potential of EST transfer for climate change and for meeting the Millennium Development Goals has yet to be realized.

  5. Brazilian industrial growth financing: are the sources adequate to the sectoral technological regimes?

    Directory of Open Access Journals (Sweden)

    Flávio de Oliveira Gonçalves

    2010-07-01

    Full Text Available This work aims to analyzing the relationship between the type of financing resources and growth of the manufacturing sectors, grouped according to technological regimes, and to relate this relationship to its degree of adequacy of the sources to the sectoral technological opportunities. Thus, panel data analysis was performed in order to asses the relationship between financial deepening and innovation. We gathered detailed data for each industrial sector, grouped according to its technological regimes, and ran a Granger causality test in panels. Results found report that more innovation-intense sectors, which boosted aggregated economic growth rather steeply, present inadequate financing dynamic to its own growth. Therefore, considering sectors with high technological opportunities and strong innovation persistence, it was observed a bank-based type of financing, whilst the ideal for its growth would be the market-based one. On the other hand, less innovative sectors are found in better situation of financing and better growth conditions. These (non-satisfactory requirements present themselves in (higher lower growth rates and industrial production share.O objetivo do trabalho é analisar a relação entre o tipo de financiamento e o crescimento dos diversos setores da indústria de transformação e ligá-la ao maior ou menor grau de adequação das fontes às oportunidades tecnológicas setoriais. Para tanto, faz-se uma avaliação em painel de dados da relação entre aprofundamento financeiro e inovação, utilizando dados desagregados para os setores industriais, agrupados de acordo com regimes tecnológicos, fazendo um exercício de Granger-causalidade em painéis. Os resultados encontrados mostram que os setores mais inovativos, que impulsionariam o crescimento da economia agregada de forma mais acentuada, apresentam dinâmicas de financiamento inadequadas ao seu crescimento. Assim, para setores com altas oportunidades tecnológicas e

  6. Variations and controls on crustal thermal regimes in Southeastern Australia

    Science.gov (United States)

    Mather, Ben; McLaren, Sandra; Taylor, David; Roy, Sukanta; Moresi, Louis

    2018-01-01

    The surface heat flow field in Australia has for many years been poorly constrained compared to continental regions elsewhere. 182 recent heat flow determinations and 66 new heat production measurements for Southeastern Australia significantly increase our understanding of local and regional lithospheric thermal regimes and allow for detailed thermal modelling. The new data give a mean surface heat flow for Victoria of 71 ± 15 mW m- 2 which fits within the 61-77 mW m- 2 range reported for Phanerozoic-aged crust globally. These data reveal three new thermally and compositionally distinct heat flow sub-provinces within the previously defined Eastern Heat Flow Province: the Delamerian heat flow sub-province (average surface heat flow 60 ± 9 mW m- 2); the Lachlan heat flow sub-province (average surface heat flow 74 ± 13 mW m- 2); and the Newer Volcanics heat flow sub-province (average surface heat flow 72 ± 16 mW m- 2) which includes extreme values that locally exceed 100 mW m- 2. Inversions of reduced heat flow and crustal differentiation find that the Delamerian sub-province has experienced significant crustal reworking compared to the Lachlan and Newer Volcanics sub-provinces. The latter has experienced volcanism within the last 8 Ma and the degree of variability observed in surface heat flow points (up to 8 mW m- 2 per kilometre laterally) cannot be replicated with steady-state thermal models through this sub-province. In the absence of a strong palaeoclimate signal, aquifer disturbances, or highly enriched granites, we suggest that this high variability arises from localised transient perturbations to the upper crust associated with recent intraplate volcanism. This is supported by a strong spatial correlation of high surface heat flow and known eruption points within the Newer Volcanics heat flow sub-province.

  7. Scale and legacy controls on catchment nutrient export regimes

    Science.gov (United States)

    Howden, N. J. K.; Burt, T.; Worrall, F.

    2017-12-01

    Nutrient dynamics in river catchments are complex: water and chemical fluxes are highly variable in low-order streams, but this variability declines as fluxes move through higher-order reaches. This poses a major challenge for process understanding as much effort is focussed on long-term monitoring of the main river channel (a high-order reach), and therefore the data available to support process understanding are predominantly derived from sites where much of the transient response of nutrient export is masked by the effect of averaging over both space and time. This may be further exacerbated at all scales by the accumulation of legacy nutrient sources in soils, aquifers and pore waters, where historical activities have led to nutrient accumulation where the catchment system is transport limited. Therefore it is of particular interest to investigate how the variability of nutrient export changes both with catchment scale (from low to high-order catchment streams) and with the presence of legacy sources, such that the context of infrequent monitoring on high-order streams can be better understood. This is not only a question of characterising nutrient export regimes per se, but also developing a more thorough understanding of how the concepts of scale and legacy may modify the statistical characteristics of observed responses across scales in both space and time. In this paper, we use synthetic data series and develop a model approach to consider how space and timescales combine with impacts of legacy sources to influence observed variability in catchment export. We find that: increasing space and timescales tend to reduce the observed variance in nutrient exports, due to an increase in travel times and greater mixing, and therefore averaging, of sources; increasing the influence of legacy sources inflates the variance, with the level of inflation dictated by the residence time of the respective sources.

  8. Electromagnetic Signature Technique as a Promising Tool to Verify Nuclear Weapons Storage and Dismantlement under a Nuclear Arms Control Regime

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Kyle J.; Williams, Laura S.; Jones, Anthony M.; Ramuhalli, Pradeep

    2012-08-01

    The 2010 ratification of the New START Treaty has been widely regarded as a noteworthy national security achievement for both the Obama administration and the Medvedev-Putin regime, but deeper cuts are envisioned under future arms control regimes. Future verification needs will include monitoring the storage of warhead components and fissile materials and verifying dismantlement of warheads, pits, secondaries, and other materials. From both the diplomatic and technical perspectives, verification under future arms control regimes will pose new challenges. Since acceptable verification technology must protect sensitive design information and attributes, non-nuclear non-sensitive signatures may provide a significant verification tool without the use of additional information barriers. The use of electromagnetic signatures to monitor nuclear material storage containers is a promising technology with the potential to fulfill these challenging requirements. Research performed at Pacific Northwest National Laboratory (PNNL) has demonstrated that low frequency electromagnetic signatures of sealed metallic containers can be used to confirm the presence of specific components on a “yes/no” basis without revealing classified information. Arms control inspectors might use this technique to verify the presence or absence of monitored items, including both nuclear and non-nuclear materials. Although additional research is needed to study signature aspects such as uniqueness and investigate container-specific scenarios, the technique potentially offers a rapid and cost-effective tool to verify reduction and dismantlement of U.S. and Russian nuclear weapons.

  9. Photo-imprinted Controllable Fano Resonance in the Terahertz Regime

    NARCIS (Netherlands)

    Georgiou, G.; Shen, N. H.; J. Gomez Rivas,; Koschny, T.; Soukoulis, C. M.

    2017-01-01

    The emergence of metamaterials, including the recently proposed metasurfaces, provides unprecedented opportunities in the manipulation as well as the generation of terahertz (THz) waves. Various actively controllable THz devices such as optical switches and phase modulators have been achieved by

  10. Control electron beam oscillation regimes in Pierce diode with overcritical current

    International Nuclear Information System (INIS)

    Rempen, I.S.; Khramov, A.E.

    2001-01-01

    The effect of the delayed feedback on the complex oscillation regimes in the electron flux with the overcritical current in the Pierce diode is studied. The possibility of controlling the oscillation regimes through changing the feedback parameters is shown. The finite-dimensional model, describing the behavior of the electron flux in the Pierce diode hydrodynamic model, is constructed. Its behavior under the effect of the delayed feedback is studied [ru

  11. Analysis of nuclear export control system and implementing international nonproliferation regime in China

    International Nuclear Information System (INIS)

    Kim, J. S.; Lee, J. S.; Ahn, J. S.; Kim, B. G.; Min, K. S.

    2000-01-01

    China's exporting behaviour of nuclear items had been disconnected from the international non-proliferation regime such as IAEA safeguards and export control related with peaceful use of nuclear energy since 1970s. Especially, China had been one of principle suppliers of nuclear facility and technologies to Pakistan and Iran which had developed nuclear weapon programs. On the other hand, according to the rapid growth of economic scale after China began to open to the world, an active program for nuclear power plant as an electricity source had established. This means that China have surfaced as a big market to Korean nuclear industries. Regarding this, the paper dealt with the nuclear export control matters, i.e. the history of nuclear export control system and analyzed on background of enforcement of U.S.-China Nuclear Cooperation Agreement that had been apolitical issue between U.S. and China. Prospects toward conforming its nuclear export policies, laws and regulations to international standards also analyzed in results

  12. Control system for material irradiation regime in electrostatic accelerator

    International Nuclear Information System (INIS)

    Brus, A.S.; Velikov, A.I.; Kuz'michev, M.A.

    1980-01-01

    Local automatic measuring and control systems for an electrostatic accelerator have been developed. A multichannel telemetering system with a light communication channel and numerical coding when transmitting data, contains 16 measuring and control channels. The system uses a method of digit-by-digit weighing to ensure measurement of an ion beam current (0.02-0.5 μA; 0.1-0.17 μA for 5 Faraday cups), measurement of target temperatures (200-700 deg C), removal and setting of Faraday cups, assignment and stabilization of target temperatures ((200-1000)+-1) deg C. The system employs integrated microcircuits. The monitor of the multicharged ion beams (0-20 μA) in the energy range from 20 to 200 keV provides continuous control of the beam axis position and the current density in the cross section of the monitor plane [ru

  13. Bridging interest, classification and technology gaps in the climate change regime

    International Nuclear Information System (INIS)

    Gupta, J.; Van der Werff, P.; Gagnon-Lebrun, F.; Van Dijk, I.; Verspeek, F.; Arkesteijn, E.; Van der Meer, J.

    2002-01-01

    The climate change regime is affected by a major credibility gap; there is a gap between what countries have been stating that they are willing to do and what they actually do. This is visible not just in the inability of the developed countries to stabilise their emissions at 1990 levels by the year 2000 as provided for in the United Nations Framework Convention on Climate Change (FCCC), but by the general reluctance of all countries to ratify the Kyoto Protocol to the Convention (KPFCCC). This research postulates that this credibility gap is affected further by three other types of gaps: 1) the interest gap; 2) the classification gap; and 3) the technology gap. The purpose of this research is thus to identify ways and means to promote industrial transformation in developing countries as a method to address the climate change problem. The title of this project is: Bridging Gaps - Enhancing Domestic and International Technological Collaboration to Enable the Adoption of Climate Relevant Technologies and Practices (CT and Ps) and thereby Foster Participation and Implementation of the Climate Convention (FCCC) by Developing Countries (DCs). In order to enhance technology co-operation, we believe that graduation profiles are needed at the international level and stakeholder involvement at both the national and international levels. refs

  14. Mechatronics control technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-15

    This book consists six chapters, which are an assembler grammar and practical use on Z801 8041/8048 and kind of assemblers and how to use, control of a microprocessor and mechatro with application of 8255, interface circuit and direction of DA converter, control of stepping motor such as introduction of it, sequence switch, drive program of stepping motor, control for DC motor such as normal rotation and abnormal rotation operation of DC motor by personal computer, control AC motor like PWM inverter and data communication among systems such as RS-232C and INTEL-HEXA format program.

  15. Mechatronics control technology

    International Nuclear Information System (INIS)

    1988-03-01

    This book consists six chapters, which are an assembler grammar and practical use on Z801 8041/8048 and kind of assemblers and how to use, control of a microprocessor and mechatro with application of 8255, interface circuit and direction of DA converter, control of stepping motor such as introduction of it, sequence switch, drive program of stepping motor, control for DC motor such as normal rotation and abnormal rotation operation of DC motor by personal computer, control AC motor like PWM inverter and data communication among systems such as RS-232C and INTEL-HEXA format program.

  16. Legislative proposal for a controlled foreign companies regime in Poland from an international perspective

    Directory of Open Access Journals (Sweden)

    Magdalena Małgorzata Hybka

    2014-12-01

    Full Text Available Tackling corporate profit shifting requires appropriate anti-avoidance measures. This article reviews one of these measures, a controlled foreign companies (corporations regime. It has been implemented in many countries, in some of them as early as the 1960s. The need for its introduction has also been expressed on many occasions by the Polish legislator. The article is composed of three sections. The first considers the reasons for the implementation of the analyzed regime. The second describes the controlled foreign corporation legislation in the USA and selected European Union member states. The last section is devoted to a bill on taxing controlled foreign companies in Poland.

  17. Brazil, the United States, and the Missile Technology Control Regime

    Science.gov (United States)

    1990-03-19

    Constitution Ave., NW Washington, DC 20230 Dr. David V. Fleischer Departamento de Ciencia Politica e Relaq6es Internacionais (REL) Universidade de...Miyamoto Departamento de Cifncia Politica Universidade Estadual Paulista Julio de Mesquita Filho Avenida Hygino Muzzi Filho, 737 Caixa Postal 420 17.500

  18. 22 CFR 121.16 - Missile Technology Control Regime Annex.

    Science.gov (United States)

    2010-04-01

    ... systems in Item 1, as follows: (a) Composite structures, laminates, and manufactures thereof, including... provided in Note (1) below for those designed for missiles with a range under 300 km or manned aircraft...) Item 3(a) engines may be exported as part of a manned aircraft or in quantities appropriate for...

  19. Emerging Engine Control Technologies

    DEFF Research Database (Denmark)

    Hendricks, Elbert; Chevalier, Alain

    1996-01-01

    as nonlinear observer based air/fuel ratio and advanced idle speed control. After a brief review of this model, it will be compared with other similar models which can be found in the literature. The attempt will be made to point out the differences between the new modified MVEM and those developed elsewhere...

  20. Using Technology to Control Costs

    Science.gov (United States)

    Ho, Simon; Schoenberg, Doug; Richards, Dan; Morath, Michael

    2009-01-01

    In this article, the authors examines the use of technology to control costs in the child care industry. One of these technology solutions is Software-as-a-Service (SaaS). SaaS solutions can help child care providers save money in many aspects of center management. In addition to cost savings, SaaS solutions are also particularly appealing to…

  1. The impact of stormwater source-control strategies on the (low) flow regime of urban catchments.

    Science.gov (United States)

    Hamel, Perrine; Fletcher, Tim D

    2014-01-01

    Stormwater management strategies increasingly recognise the need to emulate the pre-development flow regime, in addition to reducing pollutant concentrations and loads. However, it is unclear whether current design approaches for stormwater source-control techniques are effective in restoring the whole flow regime, and in particular low flows, towards their pre-development levels. We therefore modelled and compared a range of source-control stormwater management strategies, including some specifically tailored towards enhancing baseflow processes. The strategies were assessed based on the total streamflow volume and three low flow metrics. Strategies based on harvesting tanks showed much greater volume reduction than those based on raingardens. Strategies based on a low flow rate release, aimed at mimicking natural baseflow, failed to completely restore the baseflow regime. We also found that the sensitivity of the low flow metrics to the proportion of catchment treated varied amongst metrics, illustrating the importance of metrics selection in the assessment of stormwater strategies. In practice, our results suggest that realistic scenarios using low flow release from source-control techniques may not be able to fully restore the low flow regime, at least for perennial streams. However, a combination of feasibly-sized tanks and raingardens is likely to restore the baseflow regime to a great extent, while also benefitting water quality through the retention and filtration processes.

  2. Controllable nonlinearity in a dual-coupling optomechanical system under a weak-coupling regime

    Science.gov (United States)

    Zhu, Gui-Lei; Lü, Xin-You; Wan, Liang-Liang; Yin, Tai-Shuang; Bin, Qian; Wu, Ying

    2018-03-01

    Strong quantum nonlinearity gives rise to many interesting quantum effects and has wide applications in quantum physics. Here we investigate the quantum nonlinear effect of an optomechanical system (OMS) consisting of both linear and quadratic coupling. Interestingly, a controllable optomechanical nonlinearity is obtained by applying a driving laser into the cavity. This controllable optomechanical nonlinearity can be enhanced into a strong coupling regime, even if the system is initially in the weak-coupling regime. Moreover, the system dissipation can be suppressed effectively, which allows the appearance of phonon sideband and photon blockade effects in the weak-coupling regime. This work may inspire the exploration of a dual-coupling optomechanical system as well as its applications in modern quantum science.

  3. Internet Censorship Circumvention Tools: Escaping the Control of the Syrian Regime

    Directory of Open Access Journals (Sweden)

    Walid Al-Saqaf

    2016-02-01

    Full Text Available Studies have shown that authoritarian regimes tend to censor the media to limit potential threats to the status quo. While such censorship practices were traditionally aimed at broadcast and print media, the emergence of the Internet and social media in particular, prompted some authoritarian regimes, such as the Assad regime in Syria, to try and exert a similar level of censorship on the Internet as well. During the Arab Spring, the Syrian regime blocked hundreds of websites that provided social networking, news, and other services. Taking Syria as a case study, this paper examines whether Internet censorship succeeded in preventing Internet users from reaching censored online content during 2010−2012. By analyzing the use of Alkasir, a censorship circumvention tool created by the author, the paper provides empirical evidence demonstrating that users were in fact able to bypass censorship and access blocked websites. The findings demonstrate that censorship circumvention tools constituted a threat to the information control systems of authoritarian regimes, highlighting the potential of such tools to promote online freedom of expression in countries where Internet censorship is prevalent.

  4. Virtue and vice: morality police and social control in Islamic regimes

    OpenAIRE

    Detrick, Amanda F.

    2017-01-01

    Approved for public release; distribution is unlimited Certain states with religious systems of governance maintain and deploy morality police forces as a mechanism of social control. What role do morality police play in the social control programs of Islamic states? How are those forces employed, and what are the effects of those forces on society? These issues were explored through a comparative study of morality policing programs under three Islamic regimes: the Kingdom of Saudi Arabia,...

  5. Specific Therapy Regimes Could Lead to Long-Term Immunological Control of HIV

    Science.gov (United States)

    Wodarz, Dominik; Nowak, Martin A.

    1999-12-01

    We use mathematical models to study the relationship between HIV and the immune system during the natural course of infection and in the context of different antiviral treatment regimes. The models suggest that an efficient cytotoxic T lymphocyte (CTL) memory response is required to control the virus. We define CTL memory as long-term persistence of CTL precursors in the absence of antigen. Infection and depletion of CD4+ T helper cells interfere with CTL memory generation, resulting in persistent viral replication and disease progression. We find that antiviral drug therapy during primary infection can enable the development of CTL memory. In chronically infected patients, specific treatment schedules, either including deliberate drug holidays or antigenic boosts of the immune system, can lead to a re-establishment of CTL memory. Whether such treatment regimes would lead to long-term immunologic control deserves investigation under carefully controlled conditions.

  6. Non proliferation regimes undertakings: Benefits and limits of synergies in verification technologies and procedures

    International Nuclear Information System (INIS)

    Richard, M.

    2001-01-01

    development and the implementation of adequate verification. During the last thirty years, multinational or mutual verification has become a fundamental element in building States' confidence in the agreements and amongst those States. It gives them the assurance that the agreements are efficient and that all other parties comply with their obligations. This trend has been confirmed with the discovery of the cheating of two NPT Parties in the beginning of the nineties. First, the clandestine programme of weapons of mass destruction in Iraq revealed after the Gulf war and, secondly, the inability of the IAEA to verify the initial declaration of the DPRK and the discovery of its attempt to build a clandestine nuclear programme along with a ballistic missile programme. These cheats have led to the strengthening of the IAEA safeguards, the reinforcement of export controls and new efforts to curb the proliferation of ballistic missiles. With the development of verification and monitoring regimes in scope, range and precision, the international interdependence has grown very rapidly. The verification protocols of these instruments share a lot of features: procedures, inspection techniques in the field and in the laboratory, information analyses, and so on. A wide range of techniques is employed which goes from the simple like exchange of information to more intrusive techniques like environmental sampling, permanent surveillance, on-site inspection, short notice access, etc... In the past ten years, the capabilities of verification techniques have been very much improved. For example, sampling and trace analysis allow to detect minute quantities of materials which could show evidence of proscribed activities, satellite imagery can allow to detect undeclared activities or undercover preparation But a one hundred percent assurance of compliance is more a political wish than a reality and is not needed for most of the agreements. Whatever the sophistication of techniques, a small

  7. Export controls on high technology

    Energy Technology Data Exchange (ETDEWEB)

    Frank, N.K.

    1987-01-01

    A overview of the Export Administration Act of 1979 and subsequent regulations and amendments focuses on how licensing requirements and restrictions against boycott affect high technology exports. The purpose of these controls is to limit the export of technology with possible military applications, as well as to advance US foreign policy and protect the economy without imposing too great a restriction on the principles of free trade. Thus, the act encompasses political, economic, and security goals. Problems of predictability arise when embargoes or other controls are imposed for political or foreign policy reasons without regard to economic impacts. Amendments have attempted to streamline the exporting process, particularly in the area of computer and software licensing.

  8. Control Robotics Programming Technology. Technology Learning Activity. Teacher Edition.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This Technology Learning Activity (TLA) for control robotics programming technology in grades 6-10 is designed to teach students to construct and program computer-controlled devices using a LEGO DACTA set and computer interface and to help them understand how control technology and robotics affect them and their lifestyle. The suggested time for…

  9. Technology of environmental pollution control

    International Nuclear Information System (INIS)

    Shaheen, E.I.

    1992-01-01

    This book aims to be a comprehensive reference for technological advances in pollution control and abatement and pollution regulations. The first chapter, 'The dilemma of environmental pollution' summarises pollution legislation in the United States and discusses worldwide interest in pollution abatement. Chapter 2 describes some recent environmental disasters and discusses the major air pollutants and their harmful effects. Chapters 3 and 4 assess the various techniques for air pollution control and water pollution control. Chapter 5 is devoted to oil pollution impact and abatement. Solid waste management and methods of solid waste disposal are discussed in chapter 6, and noise pollution, its harmful effects and its control are dealt within chapter 7. Appendices contain a glossary, a summary of the US Clean Air Act and the US drinking water regulations and reference figures and tables relating to energy and the environment. Individual chapters contain many references

  10. Political control on the Internet in the context of a hybrid regime. Venezuela 2007-2015

    Directory of Open Access Journals (Sweden)

    Iria Puyosa

    2015-12-01

    Full Text Available This article presents a case study on control policies on the field of the internet and the social web, developed by the Venezuelan government, between 2007 and 2015. The case study includes examination of key documents of public policy for internet by Venezuelan State, industry statistics and data provided by previous research, as well as systematization of empirical events that reflect the characteristics of the practices of political control on the web that were implemented by the Venezuelan State. The study examines whether the data substantiate the hypotheses of the "dictator's dilemma" (Kerr, 2014 in a hybrid political regime as Venezuela.

  11. Hydrologic regime controls pattern and architecture of woody debris in mountain streams

    Science.gov (United States)

    Hempel, L. A.; Grant, G.; Lewis, S.

    2015-12-01

    differences in flow-dictated wood architecture control channel stability and key channel structures. Understanding how flow regimes control wood accumulations and patterns is therefore fundamental to properly interpreting the geomorphic and ecologic role of wood in streams.

  12. Electronic control of different generation regimes in mode-locked all-fibre F8 laser

    Science.gov (United States)

    Kobtsev, Sergey; Ivanenko, Aleksey; Kokhanovskiy, Alexey; Smirnov, Sergey

    2018-04-01

    We demonstrate for the first time an electronically controlled realisation of markedly different generation regimes in a mode-locked all-fibre figure-eight (F8) Yb-doped laser. Electronic adjustment of the ratio of pumping powers of two amplification stages in a nonlinear amplifying loop mirror enables the establishment of stable pulse generation regimes with different degrees of coherence and control over their parameters within relatively broad limits, with the pulse duration range exceeding a factor of two in the picosecond domain for coherent and incoherent pulses, the energy range exceeding an order of magnitude for incoherent pulses (2.2-24.8 nJ) and over a factor of 8 for coherent pulses (1.9-16.2 nJ). Adjustment of the pumping powers allows one to maintain the duration of the coherent pulses and to set their peak power in the range of 32.5-292.5 W. The proposed configuration of electronic control over the radiation parameters of a mode-locked all-fibre F8 laser enables reproducible generation of pulses of different types with specified parameters within a broad range of values.

  13. Regime-based supervisory control to reduce power fluctuations from offshore wind power plants

    DEFF Research Database (Denmark)

    Barahona Garzón, Braulio; Cutululis, Nicolaos Antonio; Trombe, Pierre-Julien

    2013-01-01

    Wind power fluctuations, especially offshore, can pose challenges in the secure and stable operation of the power system. In modern large offshore wind farms, there are supervisory controls designed to reduce the power fluctuations. Their operation is limited due to the fact that they imply loss...... of production, hence revenue for the wind farm operator. On the other hand, progresses in short term forecasting, together with the increasing use of probabilistic forecasting can help in achieving efficient power fluctuations reduction with minimum lost production. Here we present supervisory control concepts...... that consider different wind power regimes to derive control setpoints by using a Markov-Switching AutoRegressive model. We evaluate the performance versus measured data in terms of power ramp characteristics and energy efficiency....

  14. Airborne radioactive emission control technology. Volume III

    International Nuclear Information System (INIS)

    Skoski, L.; Berlin, R.; Corby, D.; Clancy, J.; Hoopes, G.

    1980-03-01

    This report reviews the current and future control technology for airborne emissions from a wide variety of industries/facilities, including uranium mining and milling, other nuclear fuel cycle facilities, other NRC-licensed and DOE facilities, fossil fuel facilities, selected metal and non-metal extraction industries, and others. Where specific radioactivity control technology is lacking, a description of any existing control technology is given. Future control technology is assessed in terms of improvements to equipment performance and process alterations. A catalogue of investigated research on advanced control technologies is presented

  15. Airborne radioactive emission control technology. Volume II

    International Nuclear Information System (INIS)

    Skoski, L.; Berlin, R.; Corby, D.; Clancy, J.; Hoopes, G.

    1980-03-01

    This report reviews the current and future control technology for airborne emissions from a wide variety of industries/facilities, including uranium mining and milling, other nuclear fuel cycle facilities, other NRC-licensed and DOE facilities, fossil fuel facilities, selected metal and non-metal extraction industries, and others. Where specific radioactivity control technology is lacking, a description of any existing control technology is given. Future control technology is assessed in terms of improvements to equipment performance and process alterations. A catalogue of investigated research on advanced control technologies is presented

  16. Airborne radioactive emission control technology. Volume I

    International Nuclear Information System (INIS)

    Skoski, L.; Berlin, R.; Corby, D.; Clancy, J.; Hoopes, G.

    1980-03-01

    This report reviews the current and future control technology for airborne emissions from a wide variety of industries/facilities, includimg uranium mining and milling, other nuclear fuel cycle facilities, other NRC-licensed and DOE facilities, fossil fuel facilities, selected metal and non-metal extraction industries, and others. Where specific radioactivity control technology is lacking a description of any existing control technology is given. Future control technology is assessed in terms of improvements to equipment performance and process alterations. A catalogue of investigated research on advanced control technologies is presented

  17. Understanding and Control of Transport in Advanced Tokamak Regimes in DIII-D

    International Nuclear Information System (INIS)

    C.M. Greenfield; J.C. DeBoo; T.C. Luce; B.W. Stallard; E.J. Synakowski; L.R. Baylor; K.H. Burrell; T.A. Casper; E.J. Doyle; D.R. Ernst; J.R. Ferron; P. Gohil; R.J. Groebner; L.L. Lao; M. Makowski; G.R. McKee; M. Murakami; C.C. Petty; R.I. Pinsker; P.A. Politzer; R. Prater; C.L. Rettig; T.L. Rhodes; B.W. Rice; G.L. Schmidt; G.M. Staebler; E.J. Strait; D.M. Thomas; M.R. Wade

    1999-01-01

    Transport phenomena are studied in Advanced Tokamak (AT) regimes in the DIII-D tokamak [Plasma Physics and Controlled Nuclear Fusion Research, 1986 (International Atomics Energy Agency, Vienna, 1987), Vol. I, p. 159], with the goal of developing understanding and control during each of three phases: Formation of the internal transport barrier (ITB) with counter neutral beam injection takes place when the heating power exceeds a threshold value of about 9 MW, contrasting to CO-NBI injection, where P threshold N H 89 = 9 for 16 confinement times has been accomplished in a discharge combining an ELMing H-mode edge and an ITB, and exhibiting ion thermal transport down to 2-3 times neoclassical. The microinstabilities usually associated with ion thermal transport are predicted stable, implying that another mechanism limits performance. High frequency MHD activity is identified as the probable cause

  18. Angular control of optical cavities in a radiation-pressure-dominated regime: the Enhanced LIGO case.

    Science.gov (United States)

    Dooley, Katherine L; Barsotti, Lisa; Adhikari, Rana X; Evans, Matthew; Fricke, Tobin T; Fritschel, Peter; Frolov, Valera; Kawabe, Keita; Smith-Lefebvre, Nicolás

    2013-12-01

    We describe the angular sensing and control (ASC) of 4 km detectors of the Laser Interferometer Gravitational-Wave Observatory (LIGO). Enhanced LIGO, the culmination of the first generation LIGO detectors, operated between 2009 and 2010 with about 40 kW of laser power in the arm cavities. In this regime, radiation-pressure effects are significant and induce instabilities in the angular opto-mechanical transfer functions. Here we present and motivate the ASC design in this extreme case and present the results of its implementation in Enhanced LIGO. Highlights of the ASC performance are successful control of opto-mechanical torsional modes, relative mirror motions of ≤ 1×10(-7) rad rms, and limited impact on in-band strain sensitivity.

  19. Can stormwater control measures restore altered urban flow regimes at the catchment scale?

    Science.gov (United States)

    Li, Congying; Fletcher, Tim D.; Duncan, Hugh P.; Burns, Matthew J.

    2017-06-01

    Over the last 20-30 years, there has been an evolution in urban stormwater management towards the use of stormwater control measures (SCMs) at or near the source of the runoff. These approaches aim to protect or restore natural elements of the flow regime. However, evidence of the success of such approaches is to date limited. We reviewed attempts to both model and monitor the catchment-scale hydrological consequences of SCMs. While many catchment-scale studies on the hydrologic effects of SCMs are based on computer simulation, these modeling approaches are limited by many uncertainties. The few existing monitoring studies provide early indications of the potential of SCMs to deliver more natural flow regimes, but many questions remain. There is an urgent need for properly monitored studies that aim to assess the hydrologic effects of SCMs at the catchment scale. In future monitoring studies, these hydrologic effects need to be characterized using appropriate flow metrics at a range of scales (from site scale to catchment scale), and changes to flow metrics by SCMs need to be assessed using robust statistical methods. Such studies will give confidence to stormwater and river managers of the feasibility and benefits of "low impact" approaches to stormwater management.

  20. Effect of Different Methods of Chemical Weed Control Irrigation Regimes on Weed Biomass and Safflower Yield

    Directory of Open Access Journals (Sweden)

    M. Matinfar

    2011-06-01

    Full Text Available In order to investigate the effects of different weed control methods and moisture regimes on safflower (Carthamus tinctorius, a field split plot experiment based on randomized complete block design with 4 replications was conducted in Takestan Iran, during growing seasons of 2007-8. Three irrigations regimes (normal irrigation, restricted irrigation at stem elongation and restricted irrigation at  flowering stage were assigned to the main plots and nine chemical weed control method (complete hand weeding, treflan with 2 L/ha as pre plant herbicide, sonalan with 3 L/ha ad pre plant herbicide, estomp with 3 L/ha as pre plant herbicide, gallant super with 0/75 L/ha as post emergence herbicide, treflan with 2 L/ha as pre plant herbicide+ gallant super with 0/75 L/ha as post emergence herbicide, sonalan with 3 L/ha as pre plant herbicide + gallant super with 0/75 L/ha as post emergence herbicide estomp with 3 L/ha as pre plant herbicide + gallant super with 0/75 L/ha as post emergence herbicide and without hand weeding to sub- plots. At the end of growing period traits like number of head   per plant, number of seed per head, 1000 grain weight, percent of seed oil, yield of seed oil and grain yield were measured. Results indicated that treflan + gallant super treatment in restricted irrigation at stem elongation stage had the lowest dry weight of weeds. In this study maximum grain yield (2927 Kg/ha was achieved from hand weeding + usual irrigation treatments. In general treflan + gallant super treatment was the most effective treatment on safflower yield and weed control.

  1. Probe-controlled soliton frequency shift in the regime of optical event horizon.

    Science.gov (United States)

    Gu, Jie; Guo, Hairun; Wang, Shaofei; Zeng, Xianglong

    2015-08-24

    In optical analogy of the event horizon, temporal pulse collision and mutual interactions are mainly between an intense solitary wave (soliton) and a dispersive probe wave. In such a regime, here we numerically investigate the probe-controlled soliton frequency shift as well as the soliton self-compression. In particular, in the dispersion landscape with multiple zero dispersion wavelengths, bi-directional soliton spectral tunneling effects is possible. Moreover, we propose a mid-infrared soliton self-compression to the generation of few-cycle ultrashort pulses, in a bulk of quadratic nonlinear crystals in contrast to optical fibers or cubic nonlinear media, which could contribute to the community with a simple and flexible method to experimental implementations.

  2. Control of Regime of Unified Interphase Power Controller by the Use of Rotary Transformer

    Directory of Open Access Journals (Sweden)

    Kalinin L.P.

    2015-12-01

    Full Text Available Interphase Power Controller (IPC has some properties of the source of the current. The use of these technical devices in electrical networks, in addition to optimization of the flow distribution, contributes to limiting of short-circuit currents and limits the level of distribution of electromechanical transients between energy systems. The increase of IPC controllability allows assigning some control function upon them and ensuring a more favorable operation of the energy system generators. We have studied a variant of such a device, which is controlled by a rotary phase-shifting transformer using the asynchronous electric machines with locked phase-wound rotor.

  3. Recent Technology Advances in Distributed Engine Control

    Science.gov (United States)

    Culley, Dennis

    2017-01-01

    This presentation provides an overview of the work performed at NASA Glenn Research Center in distributed engine control technology. This is control system hardware technology that overcomes engine system constraints by modularizing control hardware and integrating the components over communication networks.

  4. Regime change?

    International Nuclear Information System (INIS)

    Pilat, Joseph F.; Budlong-Sylvester, K.W.

    2004-01-01

    Following the 1998 nuclear tests in South Asia and later reinforced by revelations about North Korean and Iraqi nuclear activities, there has been growing concern about increasing proliferation dangers. At the same time, the prospects of radiological/nuclear terrorism are seen to be rising - since 9/11, concern over a proliferation/terrorism nexus has never been higher. In the face of this growing danger, there are urgent calls for stronger measures to strengthen the current international nuclear nonproliferation regime, including recommendations to place civilian processing of weapon-useable material under multinational control. As well, there are calls for entirely new tools, including military options. As proliferation and terrorism concerns grow, the regime is under pressure and there is a temptation to consider fundamental changes to the regime. In this context, this paper will address the following: Do we need to change the regime centered on the Treaty on the Nonproliferation of Nuclear Weapons (NPT) and the International Atomic Energy Agency (IAEA)? What improvements could ensure it will be the foundation for the proliferation resistance and physical protection needed if nuclear power grows? What will make it a viable centerpiece of future nonproliferation and counterterrorism approaches?

  5. Strengthening the nuclear non-proliferation regime

    International Nuclear Information System (INIS)

    Carlson, J.

    2003-01-01

    Although the nuclear non-proliferation regime has enjoyed considerable success, today the regime has never been under greater threat. Three states have challenged the objectives of the NPT, and there is a technology challenge - the spread of centrifuge enrichment technology and know-how. A major issue confronting the international community is, how to deal with a determined proliferator? Despite this gloomy scenario, however, the non-proliferation regime has considerable strengths - many of which can be developed further. The regime comprises complex interacting and mutually reinforcing elements. At its centre is the NPT - with IAEA safeguards as the Treaty's verification mechanism. Important complementary elements include: restraint in the supply and the acquisition of sensitive technologies; multilateral regimes such as the CTBT and proposed FMCT; various regional and bilateral regimes; the range of security and arms control arrangements outside the nuclear area (including other WMD regimes); and the development of proliferation-resistant technologies. Especially important are political incentives and sanctions in support of non-proliferation objectives. This paper outlines some of the key issues facing the non-proliferation regime

  6. Technological options for acid rain control

    International Nuclear Information System (INIS)

    Princiotta, F.T.; Sedman, C.B.

    1993-01-01

    The paper discusses technological options for acid rain control. Compliance with Title IV of the Clean Air Act Amendments of 1990 will require careful scrutiny of a number of issues before selecting control options to reduce sulfur dioxide (SO2) and nitrogen oxide (NOx) emissions. One key consideration is the effect of fuel switching or control technology upon the existing dust collector, with additional air toxics legislation looming ahead. A number of likely SO2 and NOx retrofit technologies and estimated costs are presented, along with results of retrofit case studies. New hybrid particulate controls are also being developed to meet future requirements

  7. Acidic emissions control technology and costs

    Energy Technology Data Exchange (ETDEWEB)

    Emmel, T.E.; Waddell, J.T.; Adams, R.C. (Radian Corp. (US))

    1989-01-01

    This book describes acidic emissions control technology and costs. The objectives are: to identify and characterize stationary combustion and industrial sources of directly emitted acidic materials in the United States; to evaluate the feasibility of control technologies for these sources; and to estimate the costs of applying these control technologies. This book gives results of estimates, using a model plant approach, of costs for retrofitting selected acidic emission control systems to utility and industrial boilers, Claus sulfur recovery plants, catalytic cracking units, primary copper smelters, coke oven plants, primary aluminum smelters, and municipal solid waste incinerators.

  8. Rural Systematization as an Instrument of Political Control of the Communist Regime in Romania

    Science.gov (United States)

    Carjan, Roxana; Idiceanu-Mathe, Dan; Andreea Banescu, Oana

    2017-10-01

    This paper deals with one of the means of communist control over society in Romania: rural systematization. After the Second World War, the Romanian villages underwent radical changes. The main objective of the communist regime was to reduce the number of villages from 13,129 to 10,000 by the year 2000. To this end, feasibility studies were conducted and the villages were classified as viable and non-viable. About a quarter of Romanian’s village were threatened. They were classified according to the following criteria: functionality, infrastructure and social and cultural facilities. The community itself, with its traditional and historical values and the role of the private investors were completely ignored. Some of the villages were to be turned into agro-industrial towns, while others were to be abandoned. The priority of the rural strategy was the shaping of the “New Man” who had to be provided with decent living and safety conditions. The result of the territorial systematization process would be the “New Towns”, which had to meet the ‘New Man’s” needs. This required, among other things, new buildings erected after typical design. The purpose of the communist authorities was to homogenize all the members of the society, so that they were easier to control. Another communist priority was to control the migration from the rural to the urban area by optimizing the commuting system. Encouraging population growth and improving the living conditions were the means by which the communist authorities planned to incorporate the rural environment into the urban one.

  9. Attosecond-controlled photoemission from metal nanowire tips in the few-electron regime

    Directory of Open Access Journals (Sweden)

    B. Ahn

    2017-03-01

    Full Text Available Metal nanotip photoemitters have proven to be versatile in fundamental nanoplasmonics research and applications, including, e.g., the generation of ultrafast electron pulses, the adiabatic focusing of plasmons, and as light-triggered electron sources for microscopy. Here, we report the generation of high energy photoelectrons (up to 160 eV in photoemission from single-crystalline nanowire tips in few-cycle, 750-nm laser fields at peak intensities of (2-7.3 × 1012 W/cm2. Recording the carrier-envelope phase (CEP-dependent photoemission from the nanowire tips allows us to identify rescattering contributions and also permits us to determine the high-energy cutoff of the electron spectra as a function of laser intensity. So far these types of experiments from metal nanotips have been limited to an emission regime with less than one electron per pulse. We detect up to 13 e/shot and given the limited detection efficiency, we expect up to a few ten times more electrons being emitted from the nanowire. Within the investigated intensity range, we find linear scaling of cutoff energies. The nonlinear scaling of electron count rates is consistent with tunneling photoemission occurring in the absence of significant charge interaction. The high electron energy gain is attributed to field-induced rescattering in the enhanced nanolocalized fields at the wires apex, where a strong CEP-modulation is indicative of the attosecond control of photoemission.

  10. Attosecond-controlled photoemission from metal nanowire tips in the few-electron regime

    KAUST Repository

    Ahn, B.

    2017-02-07

    Metal nanotip photoemitters have proven to be versatile in fundamental nanoplasmonics research and applications, including, e.g., the generation of ultrafast electron pulses, the adiabatic focusing of plasmons, and as light-triggered electron sources for microscopy. Here, we report the generation of high energy photoelectrons (up to 160 eV) in photoemission from single-crystalline nanowire tips in few-cycle, 750-nm laser fields at peak intensities of (2-7.3) × 1012 W/cm2. Recording the carrier-envelope phase (CEP)-dependent photoemission from the nanowire tips allows us to identify rescattering contributions and also permits us to determine the high-energy cutoff of the electron spectra as a function of laser intensity. So far these types of experiments from metal nanotips have been limited to an emission regime with less than one electron per pulse. We detect up to 13 e/shot and given the limited detection efficiency, we expect up to a few ten times more electrons being emitted from the nanowire. Within the investigated intensity range, we find linear scaling of cutoff energies. The nonlinear scaling of electron count rates is consistent with tunneling photoemission occurring in the absence of significant charge interaction. The high electron energy gain is attributed to field-induced rescattering in the enhanced nanolocalized fields at the wires apex, where a strong CEP-modulation is indicative of the attosecond control of photoemission.

  11. Technology of controlled nuclear fusion

    International Nuclear Information System (INIS)

    Hopkins, G.R.

    1977-01-01

    A review is presented of the following topics treated at the meeting (invited papers and sessions): international programs (Japanese, Joint European Tokamak, Euratom non-JET, ERDA magnetic, ERDA laser, and Electric Power Research Institute programmes); non-commercial reactor designs; commercial reactor designs; radiation damage; plasma engineering; tritium and neutronics; confinement system technology; environment and safety; blanket engineering and materials testing; fusion-fission hybrid reactors

  12. Scaling laws and dominant controls of low-severity fire regimes

    Science.gov (United States)

    Kennedy, M. C.; McKenzie, D.

    2010-12-01

    There are many characteristics of fire regimes that exhibit scaling laws, and these can be inferred for fire histories in low-severity fire regimes by evaluating the patterns of trees that record fires with a scar. We show evidence that the Sørensen’s distance—a measure of fire co-occurrence between pairs of recorder trees—shows power-law scaling with Euclidean distance (a Sørensen variogram) in fire history sites with relatively complex topography in the Pacific Northwest, but not in sites with relatively simple topography. We use a Monte Carlo goodness-of-fit procedure to find combinations of three parameters of a simple stochastic model of fire spread (probability a fire spreads to its neighbors, probability a recorder tree that experiences a fire is scarred, and mean fire size) that are able to adequately replicate observed patterns in the Sørensen variogram. We find threshold behavior at a fire spread probability below which fires cannot span the raster grid, which separates the model fit to the Sørensen variogram from sites of high topographic complexity from the fit to sites of low topographic complexity. Power-law scaling in simulated Sørensen variograms occurs when the spread probability is near this percolation threshold. This characterizes a transition from fires of irregular shape with the probability of fire spread near a percolation threshold and a power-law in the Sørensen variogram, to compact fires of more regular shape with the probability of spread well above the percolation threshold and deviation from power-law in the Sørensen variogram. We compare our results to the forest fire model that exhibits self-organized criticality (SOC forest fire mode) and find that although the SOC forest fire model model adequately replicates the Sørensen variogram for sites with complex topography with corresponding spread probabilities near the percolation threshold, it is unable to replicate the Sørensen variogram in sites with relatively low

  13. TECHNOLOGICAL OPTIONS FOR ACID RAIN CONTROL

    Science.gov (United States)

    Discussed are acid rain control options available to the electric utility industry. They include coal switching, flue gas desulfurization, and such emerging lower cost technologies as Limestone Injection Multistage Burners (LIMB) and Advanced Silicate (ADVACATE), both developed ...

  14. Fighter aircraft flight control technology design requirements

    Science.gov (United States)

    Nelson, W. E., Jr.

    1984-01-01

    The evolution of fighter aircraft flight control technology is briefly surveyed. Systems engineering, battle damage considerations for adaptive flutter suppression, in-flight simulation, and artificial intelligence are briefly discussed.

  15. Site-specific weed control technologies

    DEFF Research Database (Denmark)

    Christensen, Svend; Søgaard, Henning Tangen; Kudsk, Per

    2009-01-01

    Site-specific weed control technologies are defined as machinery or equipment embedded with technologies that detect weeds growing in a crop and, taking into account predefined factors such as economics, takes action to maximise the chances of successfully controlling them. In the article, we...... describe the basic parts of site specific weed control technologies, comprising of weed sensing systems, weed management models and precision weed control implements. A review of state-of-the-art technologies shows that several weed sensing systems and precision implements have been developed over the last...... two decades, though barriers prevent their breakthrough. Most important among these is the lack of a truly robust weed recognition method, owing to mutual shading among plants and limitations in the capacity of highly accurate spraying and weeding apparatuses.   Another barrier is the lack...

  16. The role of the geophysical template and environmental regimes in controlling stream-living trout populations

    Science.gov (United States)

    Penaluna, Brooke E.; Railsback, Steve F.; Dunham, Jason B.; Johnson, S.; Bilby, Richard E.; Skaugset, Arne E.

    2015-01-01

    The importance of multiple processes and instream factors to aquatic biota has been explored extensively, but questions remain about how local spatiotemporal variability of aquatic biota is tied to environmental regimes and the geophysical template of streams. We used an individual-based trout model to explore the relative role of the geophysical template versus environmental regimes on biomass of trout (Oncorhynchus clarkii clarkii). We parameterized the model with observed data from each of the four headwater streams (their local geophysical template and environmental regime) and then ran 12 simulations where we replaced environmental regimes (stream temperature, flow, turbidity) of a given stream with values from each neighboring stream while keeping the geophysical template fixed. We also performed single-parameter sensitivity analyses on the model results from each of the four streams. Although our modeled findings show that trout biomass is most responsive to changes in the geophysical template of streams, they also reveal that biomass is restricted by available habitat during seasonal low flow, which is a product of both the stream’s geophysical template and flow regime. Our modeled results suggest that differences in the geophysical template among streams render trout more or less sensitive to environmental change, emphasizing the importance of local fish–habitat relationships in streams.

  17. Bright and dark solitons in the normal dispersion regime of inhomogeneous optical fibers: Soliton interaction and soliton control

    International Nuclear Information System (INIS)

    Liu Wenjun; Tian Bo; Xu Tao; Sun Kun; Jiang Yan

    2010-01-01

    Symbolically investigated in this paper is a nonlinear Schroedinger equation with the varying dispersion and nonlinearity for the propagation of optical pulses in the normal dispersion regime of inhomogeneous optical fibers. With the aid of the Hirota method, analytic one- and two-soliton solutions are obtained. Relevant properties of physical and optical interest are illustrated. Different from the previous results, both the bright and dark solitons are hereby derived in the normal dispersion regime of the inhomogeneous optical fibers. Moreover, different dispersion profiles of the dispersion-decreasing fibers can be used to realize the soliton control. Finally, soliton interaction is discussed with the soliton control confirmed to have no influence on the interaction. The results might be of certain value for the study of the signal generator and soliton control.

  18. NASA Thermal Control Technologies for Robotic Spacecraft

    Science.gov (United States)

    Swanson, Theodore D.; Birur, Gajanana C.

    2003-01-01

    Technology development is inevitably a dynamic process in search of an elusive goal. It is never truly clear whether the need for a particular technology drives its development, or the existence of a new capability initiates new applications. Technology development for the thermal control of spacecraft presents an excellent example of this situation. Nevertheless, it is imperative to have a basic plan to help guide and focus such an effort. Although this plan will be a living document that changes with time to reflect technological developments, perceived needs, perceived opportunities, and the ever-changing funding environment, it is still a very useful tool. This presentation summarizes the current efforts at NASA/Goddard and NASA/JPL to develop new thermal control technology for future robotic NASA missions.

  19. Tectonics control over instability of volcanic edifices in transtensional tectonic regimes

    Science.gov (United States)

    Norini, G.; Capra, L.; Lagmay, A. M. F.; Manea, M.; Groppelli, G.

    2009-04-01

    We present the results of analogue modeling designed to investigate the interactions between volcanic edifices and transtensional basement faulting. Three sets of experiments were run to account for three examples of stratovolcanoes in active transtensive tectonics regimes, the Nevado de Toluca and Jocotitlan volcanoes in Mexico, and the Mayon volcano in the Philippines. All these volcanoes show different behavior and relationship among volcanism, instability of the volcanic edifice, and basement tectonics. Field geological and structural data gave the necessary constrains to the models. The modeling apparatus consisted of a sand cone on a sheared basal layer. Injections of vegetable oil were used to model the rising of magma inside the deformed analogue cones. Set 1: In the case of a volcano directly on top of a basal transtensive shear producing a narrow graben, as observed on the Nevado de Toluca volcano, the analogue models reveal a strong control of the basement faulting on the magma migration path and the volcano instability. Small lateral collapses are directed parallel to the basal shear and affect a limited sector of the cone. Set 2: If the graben generated by transtensive tectonics is bigger in respect to the volcanic edifice and the volcano sits on one boundary fault, as in the case of Mayon volcano, the combined normal and transcurrent movements of the analogue basement fault generate a sigmoidal structure in the sand cone, inducing major sector collapses directed at approx 45° relative to the basement shear toward the downthrown block. Set 3: For volcanoes located near major transtensive faults, as the Jocotitlan volcano, analogue modelling shows an important control of the regional tectonics on the geometry of the fractures and migration paths of magma inside the cone. These structures render unstable the flanks of the volcano and promote sector collapses perpendicular to the basement shear and directed toward the graben formed by the transtensive

  20. Wireless communication technology for modular mechatronic controllers

    CSIR Research Space (South Africa)

    Bright, G

    2010-08-01

    Full Text Available ). Communication technology allows for the remote, real-time control of mechatronics systems e.g. the use of communication to send control signals from haptic device and feedback signals from robotic manipulator in robotics-aided surgery where the surgeon...

  1. Patenting the bomb: nuclear weapons, intellectual property, and technological control.

    Science.gov (United States)

    Wellerstein, Alex

    2008-03-01

    During the course of the Manhattan Project, the U.S. government secretly attempted to acquire a monopoly on the patent rights for inventions used in the production of nuclear weapons and nuclear energy. The use of patents as a system of control, while common for more mundane technologies, would seem at first glance to conflict with the regimes of secrecy that have traditionally been associated with nuclear weapons. In explaining the origins and operations of the Manhattan Project patent system, though, this essay argues that the utilization of patents was an ad hoc attempt at legal control of the atomic bomb by Manhattan Project administrators, focused on the monopolistic aspects of the patent system and preexisting patent secrecy legislation. From the present perspective, using patents as a method of control for such weapons seems inadequate, if not unnecessary; but at the time, when the bomb was a new and essentially unregulated technology, patents played an important role in the thinking of project administrators concerned with meaningful postwar control of the bomb.

  2. Nuclear technology and the export control laws

    International Nuclear Information System (INIS)

    Munroe, J.L.; Pankratz, M.C.; Hogsett, V.H.; Lundy, A.S.

    1988-01-01

    Three basic US laws regulate the export of commodities, services, and technical data. People working in nuclear fields need to know of these laws and their impact on professional endeavors. Export of technical data means the communication of any information by oral, written, or any other means to foreign nationals within or outside the US. The medium for the communication may be a model, blueprint, sketch, or any other device that can convey information. If the data relates to items on one of the control lists, a license must be sought from the appropriated federal agency. The Militarily Critical Technologies List (MCTL), though not itself a control list, plays a major role in determining what technical data will require a validated license. The US Department of Energy (DOE), through Technical Working Gorup (TWG) 11, is responsible for the Nuclear Technology chapter of the MCTL. TWG 11 also prepares the Nuclear Technology Reference Book (NTRB), a classified guide to sensitive nuclear technology

  3. A Lei Antimonopólio da China e o seu regime de controle de concentração China's Anti-monopoly Law and its merger control regime

    Directory of Open Access Journals (Sweden)

    Wei Dan

    2012-06-01

    Full Text Available Como a maior economia emergente e uma grande potência económica do mundo, a China é um tardio, mas um importante participante do clube do Direito da Concorrência, com a entrada em vigor de uma nova Lei Antimonopólio (LAM, em 1º de agosto de 2008. O presente trabalho focaliza o regime de controle das operações de concentração através da averiguação de uma série de regulamentos de execução promulgados depois da LAM. À luz das normas substantivas e processuais do regime do controle de concentração, o estudo faz uma comparação entre o regime chinês e os regimes dos Estados Unidos e da Uunião Europeia. Alguns resultados empíricos ilustram que a China está fazendo esforços para realizar uma convergência suave com as normas internacionais, enquanto a abordagem gradual de convergência dá à china a flexibilidade para parar, ajustar e fazer uma excepção sempre que necessário.As the biggest emerging economy and a major economic power in the world, China is a late but a significant entrant into the competition law club, with the implementation of a new Anti-Monopoly Law (AML on 1st August, 2008. The article focuses on the merger enforcement by examining the implementing regulations and orders related to merger control which were issued after the enactment of the AML. In light of the substantive standards and the procedural requirements of merger control, the article makes a comparison between Chinese regime and the U.S. and EU's standards. Some empirical findings on the AML and its merger enforcement has largely illustrated that China is making its efforts to realize a soft convergence with international norms, meanwhile, the gradual approach of convergence gives China the flexibility to stop, to adjust and to make an exception whenever necessary.

  4. The nuclear materials control technology briefing book

    Energy Technology Data Exchange (ETDEWEB)

    Hartwell, J.K.; Fernandez, S.J.

    1992-03-01

    As national and international interests in nuclear arms control and non-proliferation of nuclear weapons, intensify, it becomes ever more important that contributors be aware of the technologies available for the measurement and control of the nuclear materials important to nuclear weapons development. This briefing book presents concise, nontechnical summaries of various special nuclear material (SNM) and tritium production monitoring technologies applicable to the control of nuclear materials and their production. Since the International Atomic Energy Agency (IAEA) operates a multinational, on-site-inspector-based safeguards program in support of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), many (but not all) of the technologies reported in this document are in routine use or under development for IAEA safeguards.

  5. An examination of automatic exposure control regimes for two digital radiography systems

    International Nuclear Information System (INIS)

    Marshall, N W

    2009-01-01

    The influence of two methods of an automatic exposure control (AEC) setup using a simple measure of detectability is examined as a function of x-ray beam quality for a computed radiography (CR) system and for an indirect conversion digital radiography (DR) system. The regimes assessed were constant air kerma at the detector and the constant contrast noise ratio (CNR). A low scatter geometry was employed with x-ray spectra varying from 60 kV and 1 mm Cu to 125 kV and 2 mm Cu. The CNR was measured using a 2 mm thick Al square of dimension 1 cm by 1 cm. Detectability was quantified via a nominal contrast for a fixed beam quality of 70 kV and 1 mm added Cu filtration, taken from c-d curves measured using the Leeds TO20 test object, for the four x-ray spectra. In addition, objective image quality parameters including modulation transfer function (MTF), noise power spectrum (NPS) and detective quantum efficiency (DQE) were also measured for both systems at the four different x-ray spectra. It was found that the constant air kerma strategy did not maintain threshold nominal contrast (simple detectability) constant as the x-ray beam mean energy increased, for either the CR system or the DR system. For the CR detector, the threshold nominal contrast for a 1 mm disc increased by a factor of 4.4 from 3.50% to 15.4% as the tube potential was raised from 60 kV to 125 kV, while for the DR detector, the threshold nominal contrast increased by a factor of 3.4, from 2.27% to 7.67% as the tube potential increased from 60 kV to 120 kV. The constant CNR method was more successful at maintaining constant detectability for the c-d discs. The threshold nominal contrast for the 1 mm disc changed by a factor of 1.2, from 4.80% to 5.70% for the CR system, as the spectrum changed from 60 kV to 125 kV. For the indirect conversion detector, the threshold nominal contrast increased from 2.27% to 5.66% (a factor of 1.4 increase). The constant CNR strategy required an increase in air kerma by

  6. Flow regime patterns and their controlling factors in the Ebro basin (Spain)

    Science.gov (United States)

    Bejarano, M. Dolores; Marchamalo, Miguel; García de Jalón, Diego; González del Tánago, Marta

    2010-05-01

    SummaryNatural intra-annual flow fluctuations vary between rivers, being a determining factor for aquatic insects, fish and riparian communities which are adapted to the habitat conditions and different flows throughout the seasons. Moreover, restoration of seasonal flow patterns plays an important role in achieving good ecological status of rivers, through the preservation and/or recovery of components and processes of natural river ecosystems. In this work we: (a) classify fluvial segments in the Ebro basin (North-Eastern Spain) according to the intra-annual variability of flows under natural conditions using statistical cluster analysis of monthly mean flow data; (b) characterise the resulting flow typologies according to several ecologically important hydrological variables; (c) analyse the relationships between flow regimes of fluvial segments and physical variables from their catchments; and finally (d) predict the most probable natural flow regime using logistic models based on the most determinant physical characteristics. Fifteen natural flow typologies were described in the Ebro basin, which were characterised in terms of flow fluctuation through the year as well as timing, flow ratio and duration of the maximum and minimum flows. Precipitation, biogeography and geology of catchments showed the highest correlations with flow regimes. Basin size, mean elevation and slope were also correlated. The logistic model we developed had a prediction success of 72% in the Ebro basin. The definition of the natural hydrological conditions (to which the biological communities are tailored), even when flow data are not available, is an important support in the management of river ecosystems. It is especially suitable for setting goals in aquatic ecosystem conservation or restoration projects.

  7. Environmental control technology for biomass flash pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, J.B.L.; Doctor, R.D.; Seward, W.H.

    1980-01-01

    The rapid commercialization of biomass gasification and pyrolysis technologies will raise questions concerning the environmental impacts of these systems and the associated costs for appropriate control technologies. This study concentrates on characterizing the effluent emissions and control technologies for a dual fluid-bed pyrolysis unit run by Arizona State University, Tempe, Arizona. The ASU system produces a raw product gas that is passed through a catalytic liquefaction system to produce a fuel comparable to No. 2 fuel oil. Argonne National Laboratory is conducting a program that will survey several biomass systems to standardize the sampling techniques, prioritize standard analyses and develop a data base so that environmental issues later may be addressed before they limit or impede the commercialization of biomass gasification and pyrolysis technologies. Emissions will be related to both the current and anticipated emissions standards to generate material balances and set design parameters for effluent treatment systems. This will permit an estimate to be made of the capital and operating costs associated with these technologies.

  8. Divison of Environmental Control Technology program, 1978

    International Nuclear Information System (INIS)

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above

  9. Crystal phase control in GaAs nanowires: opposing trends in the Ga- and As-limited growth regimes

    International Nuclear Information System (INIS)

    Lehmann, Sebastian; Jacobsson, Daniel; Dick, Kimberly A

    2015-01-01

    Here we demonstrate the existence of two distinct regimes for tuning crystal structure in GaAs nanowires from zinc blende to wurtzite using a single process parameter: V/III-ratio, or variation of the group V precursor flow. Extensive previous studies have shown that crystal structure is sensitive to V/III-ratio, and even that it is possible to change structure entirely using this single parameter. However, an open question has remained about whether the observed dependencies are related to growth technique or types of precursors used. Specifically, opposite trends have been reported for molecular beam epitaxy (MBE) and metal organic vapour phase epitaxy (MOVPE): while wurtzite GaAs growth is reported for high nominal V/III-ratio in MBE, zinc blende GaAs is formed in MOVPE under apparently the same parameter change (increasing precursor V/III-ratio). Here we show that these observations are not necessarily contradictory, as it may first appear, by providing a consolidated picture covering all regimes in one MOVPE growth machine only. More precisely, we observe wurtzite formation for medium nominal V/III-ratios with a critical sensitivity to the balance between Ga and As supply. Slight deviations from wurtzite conditions will result in zinc blende formation for either low V/III-ratio in the As-limited regime or high V/III-ratio in the Ga-limited regime. Our observations strongly indicate that the applied growth conditions are the crucial ingredients for crystal structure control in GaAs nanowires rather than the growth technique or precursors used. (fast track communication)

  10. Trends and challenges in global arms control regimes: Implications for the Mediterranean, North Africa, and the Middle East

    Energy Technology Data Exchange (ETDEWEB)

    Lehman, R.F. II

    1994-06-01

    In another sense, however, the nuclear age and ballistic missiles long ago created a much smaller world in which the distinctions between global and regional security have been lessened. In an age of weapons of mass destruction, any point on the earth can find itself suddenly at the center of world attention. This makes it all the more important that we understand all of the arms control tools available, including global approaches. In discussing global arms control regimes, I will focus primarily on those that are open to universal membership such as the Nuclear Nonproliferation Treaty (NPT) or which have global reach, such as certain export control and supplier regimes. It is important to remember, however, that certain regional, bilateral, and even unilateral arms control measures can have a global impact as well. One need only witness the impact of the Treaty on Conventional Forces in Europe (CFE). Despite its mere {open_quotes}Atlantic to the Urals{close_quotes} focus, the CFE treaty helped change the political and strategic calculations of the entire world. Likewise, the Conference on Security and Cooperation in Europe (CSCE), with its headquarters in Vienna, is centered on Europe but spreads from Vancouver to Vladivostok (or perhaps we should say from Amchitka to Kamchatka), circumnavigating much of the northern hemisphere when measured the long way around via North America. The political significance of its successes and failures outdistance CSCE`s geographical spread.

  11. Robotics-Control Technology. Technology Learning Activity. Teacher Edition. Technology Education Series.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains the materials required for presenting an 8-day competency-based technology learning activity (TLA) designed to introduce students in grades 6-10 to advances and career opportunities in the field of robotics-control technology. The guide uses hands-on exploratory experiences into which activities to help students develop…

  12. Protection and Control with FPGA technology

    International Nuclear Information System (INIS)

    Sohn, K. Y.; Yi, W. J.; Koo, I. S.

    2012-01-01

    To cope with the experiences such as unsatisfied response time of control and protection system, components obsolescence of those systems, and outstanding coercion of system modernization, nuclear society is striving to resolve this issue fundamentally. The reports and standards issued from IAEA and other standard organization like IBC is interested in the FPGA technology, which is fairly mature technology in other fields of industry. Intuitively it is replacing the high level of micro-processor type equipped with various software and hardware, which causes to accelerate the aging and obsolescence, and demands for system modernization in I and C system in Nuclear Power Plant. Thus utility has to spend much time and effort to upgrade I and C system throughout a decease. This paper summarizes the need of FPGA technology in Nuclear Power Plant, describing the characteristics of FPGA, test methodology and design requirements. Also the specific design and implementation experiences brought up in the course of FPGA-based controller, which has been conducted in KoRTS. The certification and verification and validation process to ensure the integrity of FPGA-based controller will be addressed. After that, Diverse Protection System (DPS) for YGN Unit 3 and 4 that is implemented via VHDL through SDLC is loaded on FPGA-based controller for run-time experimentations such as functionality, performance, integrity and reliability. Some of the test data is addressed in this paper

  13. Protection and Control with FPGA technology

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, K. Y.; Yi, W. J. [Korea Reliability Technology and System, Daejeon (Korea, Republic of); Koo, I. S. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-03-15

    To cope with the experiences such as unsatisfied response time of control and protection system, components obsolescence of those systems, and outstanding coercion of system modernization, nuclear society is striving to resolve this issue fundamentally. The reports and standards issued from IAEA and other standard organization like IBC is interested in the FPGA technology, which is fairly mature technology in other fields of industry. Intuitively it is replacing the high level of micro-processor type equipped with various software and hardware, which causes to accelerate the aging and obsolescence, and demands for system modernization in I and C system in Nuclear Power Plant. Thus utility has to spend much time and effort to upgrade I and C system throughout a decease. This paper summarizes the need of FPGA technology in Nuclear Power Plant, describing the characteristics of FPGA, test methodology and design requirements. Also the specific design and implementation experiences brought up in the course of FPGA-based controller, which has been conducted in KoRTS. The certification and verification and validation process to ensure the integrity of FPGA-based controller will be addressed. After that, Diverse Protection System (DPS) for YGN Unit 3 and 4 that is implemented via VHDL through SDLC is loaded on FPGA-based controller for run-time experimentations such as functionality, performance, integrity and reliability. Some of the test data is addressed in this paper.

  14. Utilizing Internet Technologies in Observatory Control Systems

    Science.gov (United States)

    Cording, Dean

    2002-12-01

    The 'Internet boom' of the past few years has spurred the development of a number of technologies to provide services such as secure communications, reliable messaging, information publishing and application distribution for commercial applications. Over the same period, a new generation of computer languages have also developed to provide object oriented design and development, improved reliability, and cross platform compatibility. Whilst the business models of the 'dot.com' era proved to be largely unviable, the technologies that they were based upon have survived and have matured to the point were they can now be utilized to build secure, robust and complete observatory control control systems. This paper will describe how Electro Optic Systems has utilized these technologies in the development of its third generation Robotic Observatory Control System (ROCS). ROCS provides an extremely flexible configuration capability within a control system structure to provide truly autonomous robotic observatory operation including observation scheduling. ROCS was built using Internet technologies such as Java, Java Messaging Service (JMS), Lightweight Directory Access Protocol (LDAP), Secure Sockets Layer (SSL), eXtendible Markup Language (XML), Hypertext Transport Protocol (HTTP) and Java WebStart. ROCS was designed to be capable of controlling all aspects of an observatory and be able to be reconfigured to handle changing equipment configurations or user requirements without the need for an expert computer programmer. ROCS consists of many small components, each designed to perform a specific task, with the configuration of the system specified using a simple meta language. The use of small components facilitates testing and makes it possible to prove that the system is correct.

  15. Water pollution control technology in Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This work is a compilation by members of the Committee for Studying Transfer of Environmental Technology on the expertise and technology developed by the members for controlling water pollution in Japan, together with consideration of issues concerning the transfer of environmental technologies to developing countries. The committee is composed of representatives for the Environment Agency, Japan, Osaka Prefectural Government, Osaka Municipal Government, and 25 companies such as manufacturers of environmental equipment. The document contains a total of 93 short papers grouped into sections on: industrial wastewater treatment; sewage treatment; right soil treatment; sludge treatment; and miscellaneous. One paper by the Kausai Electric Power Co., Inc., discusses waste water treatment systems in oil-fired thermal power plants; another describes an internally circulating fluidized bed boiler for cocombusting coal with industrial wastes.

  16. Emission Control Technologies for Thermal Power Plants

    Science.gov (United States)

    Nihalani, S. A.; Mishra, Y.; Juremalani, J.

    2018-03-01

    Coal thermal power plants are one of the primary sources of artificial air emissions, particularly in a country like India. Ministry of Environment and Forests has proposed draft regulation for emission standards in coal-fired power plants. This includes significant reduction in sulphur-dioxide, oxides of nitrogen, particulate matter and mercury emissions. The first step is to evaluate the technologies which represent the best selection for each power plant based on its configuration, fuel properties, performance requirements, and other site-specific factors. This paper will describe various technology options including: Flue Gas Desulfurization System, Spray Dryer Absorber (SDA), Circulating Dry Scrubber (CDS), Limestone-based Wet FGD, Low NOX burners, Selective Non Catalytic Reduction, Electrostatic Precipitator, Bag House Dust Collector, all of which have been evaluated and installed extensively to reduce SO2, NOx, PM and other emissions. Each control technology has its advantages and disadvantages. For each of the technologies considered, major features, potential operating and maintenance cost impacts, as well as key factors that contribute to the selection of one technology over another are discussed here.

  17. Organization of setting-up sanitary pass-control regime and sanitary treatment of injured persons in case of radiation accidents

    International Nuclear Information System (INIS)

    Korostin, A.S.; Klochkov, V.N.; Yatsenko, V.N.

    1995-01-01

    The main aim of sanitary pass-control regime is to prevent propagation of radioactive contamination outside the area of emergency-rescue works and guarantee of sanitary treatment of all persons having radioactive contamination. The paper has studied the questions of organization of sanitary pass-control regime, arrangement of sanitary treatment of the injured persons and rendering first aid in case of radioactive contamination of wounds. 5 refs

  18. The future for weed control and technology.

    Science.gov (United States)

    Shaner, Dale L; Beckie, Hugh J

    2014-09-01

    This review is both a retrospective (what have we missed?) and prospective (where are we going?) examination of weed control and technology, particularly as it applies to herbicide-resistant weed management (RWM). Major obstacles to RWM are discussed, including lack of diversity in weed management, unwillingness of many weed researchers to conduct real integrated weed management research or growers to accept recommendations, influence or role of agrichemical marketing and governmental policy and lack of multidisciplinary research. We then look ahead to new technologies that are needed for future weed control in general and RWM in particular, in areas such as non-chemical and chemical weed management, novel herbicides, site-specific weed management, drones for monitoring large areas, wider application of 'omics' and simulation model development. Finally, we discuss implementation strategies for integrated weed management to achieve RWM, development of RWM for developing countries, a new classification of herbicides based on mode of metabolism to facilitate greater stewardship and greater global exchange of information to focus efforts on areas that maximize progress in weed control and RWM. There is little doubt that new or emerging technologies will provide novel tools for RMW in the future, but will they arrive in time? © 2013 Her Majesty the Queen in Right of Canada Pest Management Science © 2013 Society of Chemical Industry.

  19. Mexico's "ley de narcomenudeo" drug policy reform and the international drug control regime.

    Science.gov (United States)

    Mackey, Tim K; Werb, Daniel; Beletsky, Leo; Rangel, Gudelia; Arredondo, Jaime; Strathdee, Steffanie A

    2014-11-14

    It has been over half a century since the landmark Single Convention on Narcotic Drugs was adopted, for the first time unifying international drug policy under a single treaty aimed at limiting use, manufacture, trade, possession, and trafficking of opiates, cannabis, and other narcotics. Since then, other international drug policy measures have been adopted, largely emphasizing enforcement-based approaches to reducing drug supply and use. Recently, in response to concerns that the historic focus on criminalization and enforcement has had limited effectiveness, international drug policies have begun to undergo a paradigm shift as countries seek to enact their own reforms to partially depenalize or deregulate personal drug use and possession. This includes Mexico, which in 2009 enacted national drug policy reform partially decriminalizing possession of small quantities of narcotics for personal consumption while also requiring drug treatment for repeat offenders. As countries move forward with their own reform models, critical assessment of their legal compatibility and effectiveness is necessary. In this commentary we conduct a critical assessment of the compatibility of Mexico's reform policy to the international drug policy regime and describe its role in the current evolving drug policy environment. We argue that Mexico's reform is consistent with flexibilities allowed under international drug treaty instruments and related commentaries. We also advocate that drug policy reforms and future governance efforts should be based on empirical evidence, emphasize harm reduction practices, and integrate evidence-based evaluation and implementation of drug reform measures.

  20. On the controlling mechanism of the upper turnover states in the NTC regime

    KAUST Repository

    Ji, Weiqi

    2015-12-18

    Using n-butane, n-heptane and iso-octane as representative fuels exhibiting NTC (negative temperature coefficient) behavior, comprehensive computational studies with detailed mechanisms and theoretical analysis were performed to investigate the upper stationary point, denoted as turnover states, on the NTC curve near the higher temperature regime, where the ignition delay τ exhibits a local maximum. It is found that the global behavior of the turnover states exhibits distinctive thermodynamic and kinetic characteristics under different pressures, in that the ignition delay at the turnover states shows an Arrhenius dependence on the temperature T and an approximate inverse quadratic power law dependence on the pressure P. These global behaviors imply that the temperature and pressure of the turnover states are not independent and can be correlated by Arrhenius dependence, as ln P ∝ 1/T. Further theoretical analyses demonstrate that such turnover states result from the competition between the low-temperature chain branching reactions and the decomposition of the intermediate species, and therefore correspond to a critical value, α, of the ratio of OH production from low-temperature chemistry. In addition, the ignition delay at the turnover state can be well correlated by the analytical expression derived by Peters et al., with the further demonstration that the pressure dependence of the turnover ignition delay mainly result from the H2O2 decomposition reaction. Comparison of the present results with the literature experimental data of n-heptane ignition delay time shows very good agreement.

  1. Control of power distribution and the safety of a WWER-1000 reactor during operation in a load-following regime

    International Nuclear Information System (INIS)

    Filipchuk, E.V.; Dunaev, V.G.; Luk'yanets, I.A.; Potapenko, P.T.; Timokhin, E.S.; Voznesenskij, V.A.; Mitin, V.I.

    1984-01-01

    An important task in ensuring the operational safety of a nuclear power plant with a vessel-type water-cooled, water-moderated reactor is the development of algorithms for controlling power distribution in base-load and load-following regimes. The control strategy must ensure that the form of power distribution is maintained within the permissible limits in the case of situations presenting a nuclear hazard and of xenon fluctuations when there are variations in power output. The task of controlling power distribution can be broken down into an axial problem and a radial-azimuthal problem. For maintenance of the form of axial power distribution an algorithm of optimum fast-action control is proposed; for maintenance of the radial-azimuthal form, an algorithm of optimum (i.e. best) approximation to the given distribution of control. The two control problems are solved by using a single computerized procedure based on mathematical programming. The algorithms are designed for use in computerized control. The paper presents the results of algorithm simulation. The authors propose that in the first stage, activation of the control systems should involve the operator, who can view the sequence of actions on a display screen. (author)

  2. Flow regimes

    International Nuclear Information System (INIS)

    Liles, D.R.

    1982-01-01

    Internal boundaries in multiphase flow greatly complicate fluid-dynamic and heat-transfer descriptions. Different flow regimes or topological configurations can have radically dissimilar interfacial and wall mass, momentum, and energy exchanges. To model the flow dynamics properly requires estimates of these rates. In this paper the common flow regimes for gas-liquid systems are defined and the techniques used to estimate the extent of a particular regime are described. Also, the current computer-code procedures are delineated and introduce a potentially better method is introduced

  3. Re-Assessing Leaching Requirements for the Salinity Control under New Irrigation Regimes

    Science.gov (United States)

    Wu, Laosheng; Yang, Ting; Šimůnek, Jirka

    2017-04-01

    Irrigation is essential to sustain agricultural production, but it adds dissolved salts (or salinity) to croplands. Leaching is thus necessary to keep the average rootzone salinity below the plant threshold EC levels in order to sustain crop production. Current leaching requirement (LR) calculation is based on steady-state, one-dimensional (1D), and water balance approaches, which often overestimates the LRs under transient field conditions. While in recent years, surface and sprinkler irrigated fields have been largely converted to drip or micro-spray systems and deficit irrigation has become more popular, currently accepted LRs may not be appropriate for these irrigation systems. Under point or line irrigation sources (e.g., drips or drip-lines), water and salts move both downwards and laterally, which may lead to highly saline areas on the edges of the wetted area. Under such circumstances, processes such as precipitation/dissolution of mineral phases and/or cation exchange may significantly affect the leaching requirement. The overall objective of this research was to use computer simulation models (i.e., Hydrus-2D and UnsatChem) to evaluate LRs under transient conditions and new irrigation regimes. Simulations were carried out using parameters for soils, climate zones, and major crops and their corresponding fertilization practices typical for California to: (1) Assess the effects of salt precipitation/dissolution on the leaching requirement (LR); (2) Evaluate localized water movement on average rootzone salinity and the leaching requirement (LR); (3) Evaluate leaching requirements for soils under deficit irrigation; and (4) Assess the effects of rainfall on the leaching requirement. Information from this research could significantly impact water management practices in irrigated croplands.

  4. Cure or control: complying with biomedical regime of diabetes in Cameroon

    Directory of Open Access Journals (Sweden)

    Unwin Nigel

    2008-02-01

    Full Text Available Abstract Background The objective of the study was to explore the cultural aspect of compliance, its underlying principles and how these cultural aspects can be used to improve patient centred care for diabetes in Cameroon. Methods We used participant observation to collect data from a rural and an urban health district of Cameroon from June 2001 to June 2003. Patients were studied in their natural settings through daily interactions with them. The analysis was inductive and a continuous process from the early stages of fieldwork. Results The ethnography revealed a lack of basic knowledge about diabetes and diabetes risk factors amongst people with diabetes. The issue of compliance was identified as one of the main themes in the process of treating diabetes. Compliance emerged as part of the discourse of healthcare providers in clinics and filtered into the daily discourses of people with diabetes. The clinical encounters offered treatment packages that were socially inappropriate therefore rejected or modified for most of the time by people with diabetes. Compliance to biomedical therapy suffered a setback for four main reasons: dealing with competing regimes of treatment; coming to terms with biomedical treatment of diabetes; the cost of biomedical therapy; and the impact of AIDS on accepting weight loss as a lifestyle measure in prescription packages. People with diabetes had fears about and negative opinions of accepting certain prescriptions that they thought could interfere with their accustomed social image especially that which had to do with bridging their relationship with ancestors and losing weight in the era of HIV/AIDS. Conclusion The cultural pressures on patients are responsible for patients' partial acceptance of and adherence to prescriptions. Understanding the self-image of patients and their background cultures are vital ingredients to improve diabetes care in low-income countries of Sub-Sahara Africa like Cameroon.

  5. Power laws reveal phase transitions in landscape controls of fire regimes

    Science.gov (United States)

    Donald McKenzie; Maureen C. Kennedy

    2012-01-01

    Understanding the environmental controls on historical wildfires, and how they changed across spatial scales, is difficult because there are no surviving explicit records of either weather or vegetation (fuels). Here we show how power laws associated with fire-event time series arise in limited domains of parameters that represent critical transitions in the controls...

  6. Divison of Environmental Control Technology program, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Mott, William E.

    1979-06-01

    This report covers Division of Environmental Control Technology projects in progress during FY 1978, within the Office of the Assistant Secretary for Environment, Department of Energy. It is the second in a planned series of annual reports. The Division of Environmental Control Technology (ECT) continues to support the Assistant Secretary for Environment (EV) in discharging two primary responsibilities: (1) under the Environmental Engineering (EE) Program, the independent overview and assessment of environmental control aspects of both the U.S. Department of Energy's (DOE) research, development, and demonstration (RD and D) programs and the Nation's energy policies, and (2) under the Decontamination and Decommissioning Program, the reduction of potential environmental hazards at the radioactively contaminated sites that are presently owned or were formerly used by the Government. This report presents a short summary of objectives, approach, progress and results, future plans, and a reference bibliography for each research, development, or assessment project within the program areas described above.

  7. Application of advanced technology to LMR control

    International Nuclear Information System (INIS)

    Lindsay, R.W.

    1989-01-01

    Key issues must be resolved to preserve the nuclear option; including new considerations for safety, economics, waste, transportation, diversion, etc. The programs at the Experimental Breeder Reactor II (EBR-II) are now carefully focused to provide answers to the above concerns in connection with the Integral Fast Reactor program at Argonne. Safety features that are inherent in plant design, coupled with automating plant control to help achieve the above objectives are more than just an issue of installing controllers and exotic algorithms, they include the complete integration of plant design, control strategy, and information presentation. Current technology development, both at Argonne and elsewhere includes efforts relating to the use of Artificial Intelligence, sensor/signal validation in many forms, pattern recognition, optimal develop and/or adopt promising technologies, and integrate them into an operating power plant for proof of value. After they have proven useful at EBR-II, it is expected that they can be incorporated into advanced designs such as PRISM and/or included in backfit activities as well. 6 refs

  8. Linguistic fuzzy control of the Welander problem in the chaotic regime

    International Nuclear Information System (INIS)

    Theler, German; Urdapilleta, Eugenio; Bonetto, Fabian J.

    2007-01-01

    As natural convection provides an efficient and completely passive heat removal system, natural circulation loops are a matter of great interest in the subject of advanced nuclear reactor design. However, under certain circumstances thermal-fluid dynamical instabilities may appear, threatening the reactor safety as a whole. On the other hand, fuzzy logic controllers provide and ideal framework to approach highly non-linear control problems. In the present work we introduce the basic ideas of the fuzzy logic theory and analyse the natural convection system known as the Welander problem, that is one of the simplest configurations of single-phase thermalhydraulic loops in which chaos actually occurs. Finally, we design a linguistic fuzzy controller that is able to stabilise the circulation flow in conditions that, if the controller was not present, would be otherwise non-periodic unstable. (author) [es

  9. Potential effects of incorporating fertility control into typical culling regimes in wild pig populations

    Science.gov (United States)

    Davis, Amy J.; Cunningham, Fred L.; VerCauteren, Kurt C.; Eckery, Doug C.

    2017-01-01

    Effective management of widespread invasive species such as wild pigs (Sus scrofa) is limited by resources available to devote to the effort. Better insight of the effectiveness of different management strategies on population dynamics is important for guiding decisions of resource allocation over space and time. Using a dynamic population model, we quantified effects of culling intensities and time between culling events on population dynamics of wild pigs in the USA using empirical culling patterns and data-based demographic parameters. In simulated populations closed to immigration, substantial population declines (50–100%) occurred within 4 years when 20–60% of the population was culled annually, but when immigration from surrounding areas occurred, there was a maximum of 50% reduction, even with the maximum culling intensity of 60%. Incorporating hypothetical levels of fertility control with realistic culling intensities was most effective in reducing populations when they were closed to immigration and when intrinsic population growth rate was too high (> = 1.78) to be controlled by culling alone. However, substantial benefits from fertility control used in conjunction with culling may only occur over a narrow range of net population growth rates (i.e., where net is the result of intrinsic growth rates and culling) that varies depending on intrinsic population growth rate. The management implications are that the decision to use fertility control in conjunction with culling should rely on concurrent consideration of achievable culling intensity, underlying demographic parameters, and costs of culling and fertility control. The addition of fertility control reduced abundance substantially more than culling alone, however the effects of fertility control were weaker than in populations without immigration. Because these populations were not being reduced substantially by culling alone, fertility control could be an especially helpful enhancement to culling

  10. Applying of the array transducers' technology for surface acoustic waves materials characterization in the transient regime; Application de la technologie multi-elements a la caracterisation des materiaux par ondes acoustiques de surface en regime impulsionnel

    Energy Technology Data Exchange (ETDEWEB)

    Frenet, D

    2000-07-01

    In this document we present a theoretical and experimental study which has been led to design a surface acoustic wave device for local characterisation (relatively to the wavelength) of isotropic or anisotropic materials. The device is based on a phased-array transducer of conical shape we have specifically designed for this purpose. It operates in the impulsive mode, in the frequency range of 1-5 MHz. In order to deduce mechanical properties of the material, it is possible to measure the surface wave characteristics (velocity, attenuation,...). Different methods for measuring the wave velocity have been developed taking advantage of from the phased-array technology. The originality of theses methods relies on the fact that the measures are performed without moving the transducer. Consequently, the device requires no additional mechanical system and it is quite compact. In addition, this shortens the characterisation process duration comparatively to the usually available methods (e. g. the V(z) technique). In the theoretical section of this study, a versatile model allowing to simulate in the time harmonic regime as well as in the transient regime, the transmitted field, the field reflected on isotropic or anisotropic planar samples and the output voltage for transducers of arbitrary shapes has been developed. The model has been applied to the phased-array conical transducer as well as to more classical transducers such as planar (rectangular) or focusing (spherically or cylindrically shaped) transducers. It predicts not only the geometrical contributions of the reflected field and signal but also the leaky contributions related to the surface acoustic waves. (author)

  11. Water intake, faecal output and intestinal motility in horses moved from pasture to a stabled management regime with controlled exercise

    Science.gov (United States)

    Williams, S; Horner, J; Orton, E; Green, M; McMullen, S; Mobasheri, A; Freeman, S L

    2015-01-01

    Reasons for performing study A change in management from pasture to stabling is a risk factor for equine colic. Objectives To investigate the effect of a management change from pasture with no controlled exercise to stabling with light exercise on aspects of gastrointestinal function related to large colon impaction. The hypothesis was that drinking water intake, faecal output, faecal water content and large intestinal motility would be altered by a transition from a pastured to a stabled regime. Study design Within-subject management intervention trial involving changes in feeding and exercise using noninvasive techniques. Methods Seven normal horses were evaluated in a within-subjects study design. Horses were monitored while at pasture 24 h/day, and for 14 days following a transition to a stabling regime with light controlled exercise. Drinking water intake, faecal output and faecal dry matter were measured. Motility of the caecum, sternal flexure and left colon (contractions/min) were measured twice daily by transcutaneous ultrasound. Mean values were pooled for the pastured regime and used as a reference for comparison with stabled data (Days 1–14 post stabling) for multilevel statistical analysis. Results Drinking water intake was significantly increased (mean ± s.d. pasture 2.4 ± 1.8 vs. stabled 6.4 ± 0.6 l/100 kg bwt/day), total faecal output was significantly decreased (pasture 4.62 ± 1.69 vs. stabled 1.81 ± 0.5 kg/100 kg bwt/day) and faecal dry matter content was significantly increased (pasture 18.7 ± 2.28 vs. stabled 27.2 ± 1.93% DM/day) on all days post stabling compared with measurements taken at pasture (P<0.05). Motility was significantly decreased in all regions of the large colon collectively on Day 2 post stabling (-0.76 contractions/min), and in the left colon only on Day 4 (-0.62 contractions/min; P<0.05). Conclusions There were significant changes in large intestinal motility patterns and parameters relating to gastrointestinal water

  12. Understanding regime shifts

    DEFF Research Database (Denmark)

    Heymann, Matthias; Nielsen, Kristian Hvidtfelt

    ”. Danish wind power development is all the more surprising, as the innovation process in wind technology was carried to a large extent by non-academic craftsmen and political activists. Many features of this innovation story have been investigated and that research makes it possible to summarize...... the current understanding of the regime shift....

  13. Structurally Controlled Geothermal Systems in the Central Cascades Arc-Backarc Regime, Oregon

    Energy Technology Data Exchange (ETDEWEB)

    Wannamaker, Philip E. [Univ. of Utah, Salt Lake City, UT (United States). Energy and Geoscience Inst. (EGI)

    2016-07-31

    The goal of this project has been to analyze available magnetotelluric (MT) geophysical surveys, structural geology based on mapping and LiDAR, and fluid geochemical data, to identify high-temperature fluid upwellings, critically stressed rock volumes, and other evidence of structurally-controlled geothermal resources. Data were to be integrated to create conceptual models of volcanic-hosted geothermal resources along the Central Cascades arc segment, especially in the vicinity of Mt. Jefferson to Three Sisters. LiDAR data sets available at Oregon State University (OSU) allowed detailed structural geology modeling through forest canopy. Copious spring and well fluid chemistries, including isotopes, were modeled using Geo-T and TOUGHREACT software.

  14. ‘The New Order of Things’: Immobility as protection in the regime of immigration controls

    Directory of Open Access Journals (Sweden)

    Nandita Sharma

    2017-09-01

    Full Text Available In this paper, I discuss two 1835 ordinances passed by the local council of the British colony of Mauritius. Passed shortly after Britain’s 1833 Slavery Abolition Act, these restrictions initiated the regulation and restriction of immigration within the British Empire. Seen as quite novel in their day, these ordinances employed the rhetoric of ‘protecting emigrants’ to legitimise the new constraints they imposed on free human mobility. Today, when the national ‘logic of constraint’ on human mobility is almost uncontested, the idea that immigration controls protect migrants remains central to the discursive practices concerning human trafficking. Nation-state constraints on human mobility are normalised while the exploitation and abuse of people on the move is ideologically redirected to ‘modern-day slavers’ or ‘evil traffickers’, thus absolving both the state and globally operative capital of their culpability.

  15. Climate Regime Controls Fluvial Evacuation of Sediment Mobilized by Large Earthquakes

    Science.gov (United States)

    Wang, J.; Jin, Z.; Hilton, R. G.; Zhang, F.; Densmore, A. L.; Li, G.; West, A. J.

    2014-12-01

    Large earthquakes in active mountain belts can trigger landslides which mobilize large volumes of clastic sediment. Delivery of this material to river channels may result in aggradation and flooding, while sediment residing on hillslopes may increase the likelihood of subsequent landslides and debris flows. Despite this recognition, the controls on the residence time of coseismic landslide sediment in river catchments remain poorly understood. Here we assess the residence time of fine-grained (100 years at the present export rate. We show that the residence time is proportional to the extent of coseismic landsliding, and inversely proportional to the frequency of intense runoff events. Together with previously reported observations from the 1999 Chi-Chi earthquake in Taiwan, our results demonstrate the importance of climate in setting the length of time that river systems are impacted by large earthquakes. References: West et al., 2014, Earth Planet Sc. Lett., 396, 143-153.

  16. Circular polarization control for the European XFEL in the soft X-ray regime

    International Nuclear Information System (INIS)

    Geloni, Gianluca; Kocharyan, Vitali; Saldin, Evgeni

    2011-06-01

    The possibility of producing X-ray radiation with high degree of circular polarization is an important asset at XFEL facilities. Polarization control is most important in the soft X-ray region.However, the baseline of the European XFEL, including the soft X-ray SASE3 line, foresees planar undulators only, yielding linearly-polarized radiation. It is clear that the lowest-risk strategy for implementing polarization control at SASE3 involves adding an APPLE II-type undulator at the end of the planar undulator, in order to exploit the micro bunching from the baseline FEL. Detailed experience is available in synchrotron radiation laboratories concerning the manufacturing of 5 m-long APPLE II undulators. However, the choice of a short helical radiator leads to the problem of background suppression. The driving idea of our proposal is that the background radiation can be suppressed by spatial filtering. This operation can be performed by inserting slits behind the APPLE II radiator, where the linearly-polarized radiation spot size is about 30 times larger than the radiation spot size from the helical radiator. The last 7 cells of the SASE3 undulator are left with an open gap in order to provide a total 42 m drift section for electron beam and radiation. Due to the presence of the drift the linearly-polarized radiation spot size increases, and the linearly polarized background radiation can be suppressed by the slits. At the same time, the microbunch structure is easily preserved, so that intense (100 GW) coherent radiation is emitted in the helical radiator. We propose a filtering setup consisting of a pair of water cooled slits for X-ray beam filtering and of a 5 m-long magnetic chicane, which creates an offset for slit installation immediately behind the helical radiator. Electrons and X-rays are separated before the slits by the magnetic chicane, so that the electron beam can pass by the filtering setup without perturbations. Based on start-to-end simulations we

  17. Individual nutrition therapy and exercise regime: a controlled trial of injured, vulnerable elderly (INTERACTIVE trial).

    Science.gov (United States)

    Thomas, Susie K; Humphreys, Karen J; Miller, Michelle D; Cameron, Ian D; Whitehead, Craig; Kurrle, Susan; Mackintosh, Shylie; Crotty, Maria

    2008-02-26

    Proximal femoral fractures are amongst the most devastating consequences of osteoporosis and injurious accidental falls with 25-35% of patients dying in the first year post-fracture. Effective rehabilitation strategies are evolving however, despite established associations between nutrition, mobility, strength and strength-related functional outcomes; there has been only one small study with older adults immediately following fragility fracture where a combination of both exercise and nutrition have been provided. The aim of the INTERACTIVE trial is to establish whether a six month, individualised exercise and nutrition program commencing within fourteen days of surgery for proximal femur fracture, results in clinically and statistically significant improvements in physical function, body composition and quality of life at an acceptable level of cost and resource use and without increasing the burden of caregivers. This randomised controlled trial will be performed across two sites, a 500 bed acute hospital in Adelaide, South Australia and a 250 bed acute hospital in Sydney, New South Wales. Four hundred and sixty community-dwelling older adults aged > 70 will be recruited after suffering a proximal femoral fracture and followed into the community over a 12-month period. Participants allocated to the intervention group will receive a six month individualised care plan combining resistance training and nutrition therapy commencing within 14 days post-surgery. Outcomes will be assessed by an individual masked to treatment allocation at six and 12 months. To determine differences between the groups at the primary end-point (six months), ANCOVA or logistic regression will be used with models adjusted according to potential confounders. The INTERACTIVE trial is among the first to combine nutrition and exercise therapy as an early intervention to address the serious consequence of rapid deconditioning and weight loss and subsequent ability to regain pre-morbid function

  18. Individual nutrition therapy and exercise regime: A controlled trial of injured, vulnerable elderly (INTERACTIVE trial

    Directory of Open Access Journals (Sweden)

    Whitehead Craig

    2008-02-01

    Full Text Available Abstract Background Proximal femoral fractures are amongst the most devastating consequences of osteoporosis and injurious accidental falls with 25–35% of patients dying in the first year post-fracture. Effective rehabilitation strategies are evolving however, despite established associations between nutrition, mobility, strength and strength-related functional outcomes; there has been only one small study with older adults immediately following fragility fracture where a combination of both exercise and nutrition have been provided. The aim of the INTERACTIVE trial is to establish whether a six month, individualised exercise and nutrition program commencing within fourteen days of surgery for proximal femur fracture, results in clinically and statistically significant improvements in physical function, body composition and quality of life at an acceptable level of cost and resource use and without increasing the burden of caregivers. Methods and Design This randomised controlled trial will be performed across two sites, a 500 bed acute hospital in Adelaide, South Australia and a 250 bed acute hospital in Sydney, New South Wales. Four hundred and sixty community-dwelling older adults aged > 70 will be recruited after suffering a proximal femoral fracture and followed into the community over a 12-month period. Participants allocated to the intervention group will receive a six month individualised care plan combining resistance training and nutrition therapy commencing within 14 days post-surgery. Outcomes will be assessed by an individual masked to treatment allocation at six and 12 months. To determine differences between the groups at the primary end-point (six months, ANCOVA or logistic regression will be used with models adjusted according to potential confounders. Discussion The INTERACTIVE trial is among the first to combine nutrition and exercise therapy as an early intervention to address the serious consequence of rapid deconditioning

  19. Division of Environmental Control Technology program, 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    Environmental engineering programs are reviewed for the following technologies; coal; petroleum and gas; oil shale; solar; geothermal and energy conservation; nuclear energy; and decontamination and decommissioning. Separate abstracts were prepared for each technology. (MHR)

  20. A Study on Current Status of Detection Technology and Establishment of National Detection Regime against Nuclear/Radiological Terrorism

    International Nuclear Information System (INIS)

    Kwak, Sung Woo; Jang, Sung Soon; Lee, Joung Hoon; Yoo, Ho Sik

    2009-01-01

    Since 1990s, some events - detection of a dirty bomb in a Russian nation park in 1995, 9/11 terrorist attack to WTC in 2001, discovery of Al-Qaeda's experimentation to build a dirty bomb in 2003 etc - have showed that nuclear or radiological terrorism relating to radioactive materials (hereinafter 'radioactive materials' is referred to as 'nuclear material, nuclear spent fuel and radioactive source') is not incredible but serious and credible threat. Thus, to respond to the new threat, the international community has not only strengthened security and physical protection of radioactive materials but also established prevention of and response to illicit trafficking of radioactive materials. In this regard, our government has enacted or revised the national regulatory framework with a view to improving security of radioactive materials and joined the international convention or agreement to meet this international trend. For the purpose of prevention of nuclear/radiological terrorism, this paper reviews physical characteristics of nuclear material and existing detection instruments used for prevention of illicit trafficking. Finally, national detection regime against nuclear/radiological terrorism based on paths of the smuggled radioactive materials to terrorist's target building/area, national topography and road networks, and defence-in-depth concept is suggested in this paper. This study should contribute to protect people's health, safety and environment from nuclear/radiological terrorism

  1. Emerging technologies in microguidance and control

    Science.gov (United States)

    Weinberg, Marc S.

    1993-01-01

    Employing recent advances in microfabrication, the Charles Stark Draper Laboratory has developed inertial guidance instruments of very small size and low cost. Microfabrication employs the batch processing techniques of solid state electronics, such as photolithography, diffusion, and etching, to carve mechanical parts. Within a few years, microfabricated gyroscopes should perform in the 10 to 100 deg/h range. Microfabricated accelerometers have demonstrated performance in the 50 to 500 microgravity range. These instruments will result in not only the redesign of conventional military products, but also new applications that could not exist without small, inexpensive sensors and computing. Draper's microfabricated accelerometers and gyroscopes will be described and test results summarized. Associated electronics and control issues will also be addressed. Gimballed, vibrating gyroscopes and force rebalance accelerometers constructed from bulk silicon, polysilicon surface-machined tuning fork gyroscopes, and quartz resonant accelerometers and gyroscopes are examined. Draper is pursuing several types of devices for the following reasons: to address wide ranges of performance, to realize construction in a flat pack, and to lessen the risks associated with emerging technologies.

  2. MATURING ECRF TECHNOLOGY FOR PLASMA CONTROL

    International Nuclear Information System (INIS)

    CALLIS, R.W.; CARY, W.P.; CHU, S.; LOANE, J.L.; ELLIS, R.A.; FELCH, K.; GORELOV, Y.A.; GRUNLOH, H.J.; HOSEA, J.; KAJIWARA, K.; LOHR, J.; LUCE, T.C.; PEAVY, J.J.; PINSKER, R.I.; PONCE, D.; PRATER, R.; SHAPIRO, M.; TEMKIN, R.J.; TOOKER, J.F.

    2002-01-01

    OAK A271 MUTURING ECRF TECHNOLOGY FOR PLASMA CONTROL. Understanding of the physics of internal transport barriers (ITBs) is being furthered by analysis and comparisons of experimental data from many different tokamaks worldwide. An international database consisting of scalar and 2-D profile data for ITB plasmas is being developed to determine the requirements for the formation and sustainment of ITBs and to perform tests of theory-based transport models in an effort to improve the predictive capability of the models. Analysis using the database indicates that: (a) the power required to form ITBs decreases with increased negative magnetic shear of the target plasma, and: (b) the E x B flow shear rate is close to the linear growth rate of the ITG modes at the time of barrier formation when compared for several fusion devices. Tests of several transport models (JETTO, Weiland model) using the 2-D profile data indicate that there is only limited agreement between the model predictions and the experimental results for the range of plasma conditions examined for the different devices (DIII-D, JET, JT-60U). Gyrokinetic stability analysis (using the GKS code) of the ITB discharges from these devices indicates that the ITG/TEM growth rates decrease with increased negative magnetic shear and that the E x B shear rate is comparable to the linear growth rates at the location of the ITB

  3. Recent developments in radiation field control technology

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.J. [Electric Power Research Institute, Palo Alto, CA (United States)

    1995-03-01

    The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses.

  4. Recent developments in radiation field control technology

    International Nuclear Information System (INIS)

    Wood, C.J.

    1995-01-01

    The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses

  5. Environmental control technology for shale oil wastewaters

    Energy Technology Data Exchange (ETDEWEB)

    Mercer, B.W.; Wakamiya, W.; Bell, N.E.; Mason, M.J.; Spencer, R.R.; English, C.J.; Riley, R.G.

    1982-09-01

    This report summarizes the results of studies conducted at Pacific Northwest Laboratory from 1976 to 1982 on environmental control technology for shale oil wastewaters. Experimental studies conducted during the course of the program were focused largely on the treatment and disposal of retort water, particularly water produced by in situ retorting of oil shale. Alternative methods were evaluated for the treatment and disposal of retort water and minewater. Treatment and disposal processes evaluated for retort water include evaporation for separation of water from both inorganic and organic pollutants; steam stripping for ammonia and volatile organics removal; activated sludge and anaerobic digestion for removal of biodegradable organics and other oxidizable substances; carbon adsorption for removal of nonbiodegradable organics; chemical coagulation for removal of suspended matter and heavy metals; wet air oxidation and solvent extraction for removal of organics; and land disposal and underground injection for disposal of retort water. Methods for the treatment of minewater include chemical processing and ion exchange for fluoride and boron removal. Preliminary cost estimates are given for several retort water treatment processes.

  6. Technological Improvements for Digital Fire Control Systems

    Science.gov (United States)

    2017-09-30

    Initiative Information Develop and fabricate next generation designs using advanced materials and processes. This will include but is not limited to...component fabrication ; process integration, configuration management, materials development, coatings technology, packaging technology and overall...systems engineering. Prototype and integrated system components shall be produced for developmental test units, production test units and

  7. Development of environmental radiation control technology

    International Nuclear Information System (INIS)

    Kim, Ingyu; Kim, Enhan; Keum, Dongkwon

    2012-04-01

    To develop the comprehensive environmental radiation management technology, - An urban atmospheric dispersion model and decision-aiding model have been developed. - The technologies for assessing the radiation impact to non-human biota and the environmental medium contamination have developed. - The analytical techniques of the indicator radionuclides related to decommissioning of nuclear facilities and nuclear waste repository have been developed. - The national environmental radiation impact has been assessed, and the optimum management system of natural radiation has been established

  8. profitability of soil erosion control technologies in eastern uganda ...

    African Journals Online (AJOL)

    Prof. Adipala Ekwamu

    study was to estimate the profitability of application of SLM in the form of soil erosion control technologies by ... of the costs and benefits associated with utilisation of a new technology is as one of the major obstacles to farmers adopting improved technologies. Similarly ..... acceptable financial returns despite increases in.

  9. Exploring the physical controls of regional patterns of flow duration curves – Part 2: Role of seasonality, the regime curve, and associated process controls

    Directory of Open Access Journals (Sweden)

    M. Sivapalan

    2012-11-01

    Full Text Available The goal of this paper is to explore the process controls underpinning regional patterns of variations of streamflow regime behavior, i.e., the mean seasonal variation of streamflow within the year, across the continental United States. The ultimate motivation is to use the resulting process understanding to generate insights into the physical controls of another signature of streamflow variability, namely the flow duration curve (FDC. The construction of the FDC removes the time dependence of flows. Thus in order to better understand the physical controls in regions that exhibit strong seasonal dependence, the regime curve (RC, which is closely connected to the FDC, is studied in this paper and later linked back to the FDC. To achieve these aims a top-down modeling approach is adopted; we start with a simple two-stage bucket model, which is systematically enhanced through addition of new processes on the basis of model performance assessment in relation to observations, using rainfall-runoff data from 197 United States catchments belonging to the MOPEX dataset. Exploration of dominant processes and the determination of required model complexity are carried out through model-based sensitivity analyses, guided by a performance metric. Results indicated systematic regional trends in dominant processes: snowmelt was a key process control in cold mountainous catchments in the north and north-west, whereas snowmelt and vegetation cover dynamics were key controls in the north-east; seasonal vegetation cover dynamics (phenology and interception were important along the Appalachian mountain range in the east. A simple two-bucket model (with no other additions was found to be adequate in warm humid catchments along the west coast and in the south-east, with both regions exhibiting strong seasonality, whereas much more complex models are needed in the dry south and south-west. Agricultural catchments in the mid-west were found to be difficult to predict

  10. A Randomised Control Trial of Four Different Regimes of Biofeedback Program in the Treatment of Faecal Incontinence.

    Science.gov (United States)

    Young, Christopher J; Zahid, Assad; Koh, Cherry E; Young, Jane M; Byrne, Christopher M; Solomon, Michael J; Rex, Jenny; Candido, Janet

    2017-10-20

    Biofeedback is an established, effective and non-invasive treatment for faecal incontinence (FI). The aim was to compare the effectiveness of four different biofeedback treatment regimes. Randomised control trial of patients with FI, stratified into two groups (metropolitan and rural) and then randomised into two subgroups (groups 1 and 2 within metropolitan, groups 3 and 4 within rural) with varying face-to-face and telephone biofeedback components. All patients received standardised counselling and education, dietary modification and the use of anti-diarrhoeal medications. Group 1 received 4 monthly face-to-face biofeedback treatments, groups 2 and 3 received one face-to-face biofeedback followed by telephone biofeedback and group 4 received a once-off face-to-face biofeedback treatment. Primary outcomes were patient assessed severity of FI and quality of life as assessed by SF-36 and direct questioning of objectives. Secondary outcomes included St Mark's incontinence score, anxiety, depression and anorectal physiology measures (resting, squeeze pressures; isotonic, isometric fatigue times). Between 2006-2012, 351 patients were recruited. One patient died leaving 350 for analysis. 332 (95%) were females. Mean age was 60 (SD = 14). All groups had significant improvements in FI, quality of life, incontinence score and mental status (p < 0.001 each). There were no differences in improvements in FI between groups although patient satisfaction was less with reduced face-to-face contact. There were modest improvements in isotonic and isometric fatigue times suggesting improved sphincter endurance (both p < 0.001). Biofeedback is effective for FI. Although face-to-face and telephone biofeedback is not necessary to improve FI, it is important for patient satisfaction. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  11. Alternative control technologies: Technologies de contrôle non conventionnelles

    National Research Council Canada - National Science Library

    Hudgins, Bernard

    1998-01-01

    .... Through different chapters, the various human factors issues related to the introduction of alternative control technologies into military cockpits are reviewed, in conjunction with more technical...

  12. Bank-to-turn control technology survey for homing missiles

    Science.gov (United States)

    Riedel, F. W.

    1980-01-01

    The potential advantages of bank-to-turn control are summarized. Recent and current programs actively investigating bank-to-turn steering are reviewed and critical technology areas concerned with bank-to-turn control are assessed.

  13. Control technology for nuclear power system of next generation

    International Nuclear Information System (INIS)

    1995-01-01

    This report is the summary of the results obtained by the investigation activities for two years carried out by the expert committee on investigation of control technology for nuclear power system of next generation. The course of investigation is outlined, and as the results, as advanced control technologies, adaptive control. H sub (infinite) control, fuzzy control and the application of autonomous distributed system and genetic algorithm to control; as operation support technology, the operation and monitoring system for nuclear power plants and safety support system; as interface technology which is the basic technology of them, virtual reality, multimedia and so on; further, various problems due to human factors, computer technology, artificial intelligence and others were taken up, and the grasp of the present status and the future subjects was carried out, including the information in international conferences. The items of the investigation are roughly divided into measurement and control technologies, interface technology and operation support, human factors, computer technology and artificial intelligence, and the trend in foreign countries, and the results of investigation for respective items are reported. (K.I.)

  14. PROCESS CONTROL IN THE EDUCATION OF ORGANIC CHEMICAL TECHNOLOGY

    OpenAIRE

    Csontos, lstván; Department of Organic Chemical Technology, Budapest University of Technology and Economics; Marosi, György; Department of Organic Chemical Technology, Budapest University of Technology and Economics; Faigl, Ferenc; Department of Organic Chemical Technology, Budapest University of Technology and Economics

    2013-01-01

    Laboratory practices for demonstrating the importance of advanced process control methods in the organic chemical technologies have been elaborated. It required the development of a system tha tintegrates the advantages of a reaction calorimeter and a model system of industrial controlled reactors. The hardware and software configuration support the transfer of elaborated control programs of reactions from laboratory level to the industrial technology. General control algorithms of diazotizat...

  15. INFLUENCE OF VARIOUS RAW MATERIAL AND TECHNOLOGICAL REGIMES OF ITS RECYCLING ON QUALITATIVE INDICES OF SEMI-FINISHED PRODUCT USED FOR PACKAGE PRINTING

    Directory of Open Access Journals (Sweden)

    V. V. Kuzmich

    2014-01-01

    Full Text Available The paper has investigated influence of various technologies on recycling of vegetal raw material with the purpose to obtain the desired product used for package printing. Influence of various technological regimes and introduction of fresh polyethylene additives for recycled raw material on qualitative indices of the desired product has been studied in the paper. Investigations of preliminary aquatic hydrolysis of vegetal raw material have shown that in order to obtain high quality cellulose from vegetal raw material it is necessary that this cellulose has not less than 2-3 % of hemicellulose otherwise its qualitative indices are significantly deteriorated that is important for packaging printing. Usage of carbon dioxide aqueous solution for preliminary vegetal raw material hydrolysis contributes to reduction in destruction of cellulose carbo-hydrate. This improves qualitative indices of the obtained desired product that is cellulose which is used for package printing.Recommendations for sulphate pulping of vegetal raw material with preliminary hydrolysis have been prepared with the purpose to improve physical and mechanical characteristics of the obtained desired product - cellulose on the basis of the obtained data on content of hemicellulose in cellulose.While investigating recycled polymers the obtained results have demonstrated that increase of low- molecular product content in them looks rather typical. This suggests that packaging will have lower qualitative indices while using polymers being kept in waste deposits. In order to avoid this phenomena it is necessary to add 20-30 % of fresh polymers during their recycling.

  16. Control of processes using isotopic diagnostic's technologies

    International Nuclear Information System (INIS)

    Vargas, Celso; Chaverri, Oscar; Chine, Bruno; Conejo, Mario

    2005-01-01

    The Escuela de Ciencias e Ingenieria de los Materiales of the Instituto Tecnologico de Costa Rica, in cooperation with OIEA, develops a project of dowry of capacity oriented to the formation of professionals and equipment for the use of two important technologies of isotopic diagnostic. The first of them is the technology of tracers that operates the unique properties that present different radioactive isotopics like open sources. The second one well known as scanning or profile gamma, uses sealed source, of the some nature that the previous ones, to obtain profiles in different processes and thus to determine its internal condition and operation. The objective of this article is to present both technologies, its benefits and to promote the use in the country [es

  17. Advanced Instrumentation, Information, and Control Systems Technologies Technical Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Bruce Hallbert

    2012-09-01

    Reliable instrumentation, information, and control (II&C) systems technologies are essential to ensuring safe and efficient operation of the U.S. light water reactor (LWR) fleet. These technologies affect every aspect of nuclear power plant (NPP) and balance-of-plant operations. In 1997, the National Research Council conducted a study concerning the challenges involved in modernization of digital instrumentation and control systems in NPPs. Their findings identified the need for new II&C technology integration.

  18. A new in vivo interdental sampling method comparing a daily flossing regime versus a manual brush control.

    Science.gov (United States)

    Bellamy, P; Barlow, A; Puri, G; Wright, K I T; Mussett, A; Zhou, X

    2004-01-01

    was significantly reduced versus baseline scores. Non-floss users showed no significant reduction. In direct comparison, less interdental plaque was recovered from subjects who had followed a daily flossing regime compared to subjects who had used a manual toothbrush alone (p = 0.0866). The sampling method quantified the cleaning effects of daily flossing on interproximal plaque levels. Daily flossing significantly reduced the amount of plaque found between the teeth compared to a manual brushing regimen alone. This new method should be useful in future studies on the evaluation of mechanical or chemical means of interproximal plaque control.

  19. Hazards Control Department annual technology review, 1984

    International Nuclear Information System (INIS)

    Griffith, R.V.; Anderson, K.J.

    1985-01-01

    The Annual Technology Review covers the period from October 1983 to September 1984. Topics reviewed include Nuclear Criticality Information System, nuclear dosimetry, personnel dosimetry, laser chemistry, electric filters and neutron spectrometry. Individual papers are indexed and abstracted for the data base. (DT)

  20. Telescience and payload control support technologies

    Science.gov (United States)

    Donzelli, P.; Macavero, E.

    1988-10-01

    Technological options and their utilization scenarios for telescience implementation in manned space stations are outlined. On board and ground based data acquisition systems (SIMD and MIMD architecture, digital signal processing); and real time knowledge based systems to support principal investigators and payload specialists are discussed.

  1. Applying Trusted Network Technology To Process Control Systems

    Science.gov (United States)

    Okhravi, Hamed; Nicol, David

    Interconnections between process control networks and enterprise networks expose instrumentation and control systems and the critical infrastructure components they operate to a variety of cyber attacks. Several architectural standards and security best practices have been proposed for industrial control systems. However, they are based on older architectures and do not leverage the latest hardware and software technologies. This paper describes new technologies that can be applied to the design of next generation security architectures for industrial control systems. The technologies are discussed along with their security benefits and design trade-offs.

  2. Wireless technology for command control and communications

    Science.gov (United States)

    Lee, C. H.

    1993-09-01

    There are many different views on exactly what is personal communication services (PCS). But the majority agree that 'integrated access,' 'personalized identification,' and 'mobile roaming' are the themes of PCS. Personalized services means that identification is not based on a terminal but instead on a person. PCS will use digital technology, standard procedures, and air interface for universal roaming. This means a tetherless connection through all the infrastructure for voice, data, image, and video services. The intensive development can be divided into the following four areas: digital cellular or digital PCS, wireless data network services (WWAN, WLAN, WPBX), land mobile radio (LMR), and mobile satellite services (MSS). These areas characterize wireless technology in their own perspectives; possible DOD applications will be discussed.

  3. technologies: controlling african cassava mosaic virus

    African Journals Online (AJOL)

    par une mouche blanche, sont à l'origine de gros dégâts dans les champs de manioc en Ouganda avec, pour conséquences, des pénuries alimentaires et une famine dans certaines régions. Dans le but de contrôler la maladie et de restaurer la sécurité alimentaire dans le pays, des technologies appropriées doivent être.

  4. Noise-control needs in the developing energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Keast, D.N.

    1978-03-01

    The noise characteristics of existing energy conversion technologies, e.g., from obtaining and processing fossil fuels to power plants operations, and of developing energy technologies (wind, geothermal sources, solar energy or fusion systems) are discussed in terms of the effects of noise on humans, animals, structures, and equipment and methods for noise control. Regulations for noise control are described. Recommendations are made for further research on noise control and noise effects. (LCL)

  5. RFID Based Security Access Control System with GSM Technology

    OpenAIRE

    Peter Adole; Joseph M. Môm; Gabriel A. Igwue

    2016-01-01

    The security challenges being encountered in many places today require electronic means of controlling access to secured premises in addition to the available security personnel. Various technologies were used in different forms to solve these challenges. The Radio Frequency Identification (RFID) Based Access Control Security system with GSM technology presented in this work helps to prevent unauthorized access to controlled environments (secured premises). This is achieved mainly...

  6. LNG fire and vapor control system technologies

    Energy Technology Data Exchange (ETDEWEB)

    Konzek, G.J.; Yasutake, K.M.; Franklin, A.L.

    1982-06-01

    This report provides a review of fire and vapor control practices used in the liquefied natural gas (LNG) industry. Specific objectives of this effort were to summarize the state-of-the-art of LNG fire and vapor control; define representative LNG facilities and their associated fire and vapor control systems; and develop an approach for a quantitative effectiveness evaluation of LNG fire and vapor control systems. In this report a brief summary of LNG physical properties is given. This is followed by a discussion of basic fire and vapor control design philosophy and detailed reviews of fire and vapor control practices. The operating characteristics and typical applications and application limitations of leak detectors, fire detectors, dikes, coatings, closed circuit television, communication systems, dry chemicals, water, high expansion foam, carbon dioxide and halogenated hydrocarbons are described. Summary descriptions of a representative LNG peakshaving facility and import terminal are included in this report together with typical fire and vapor control systems and their locations in these types of facilities. This state-of-the-art review identifies large differences in the application of fire and vapor control systems throughout the LNG industry.

  7. Mercury emissions control technologies for mixed waste thermal treatment

    International Nuclear Information System (INIS)

    Chambers, A.; Knecht, M.; Soelberg, N.; Eaton, D.

    1997-01-01

    EPA has identified wet scrubbing at low mercury feedrates, as well as carbon adsorption via carbon injection into the offgas or via flow through fixed carbon beds, as control technologies that can be used to meet the proposed Maximum Achievable Control Technology (MACT) rule limit for mercury emissions from hazardous waste incinerators. DOE is currently funding demonstrations of gold amalgamation that may also control mercury to the desired levels. Performance data from a variety of sources was reviewed to determine ranges of achievable mercury control. Preliminary costs were estimated for using these technologies to control mercury emissions from mixed waste incineration. Mercury emissions control for mixed waste incineration may need to be more efficient than for incineration of other hazardous wastes because of higher mercury concentrations in some mixed waste streams. However, mercury control performance data for wet scrubbing and carbon adsorption is highly variable. More information is needed to demonstrate control efficiencies that are achievable under various design and operating conditions for wet scrubbing, carbon adsorption, and gold amalgamation technologies. Given certain assumptions made in this study, capital costs, operating costs, and lifecycle costs for carbon injection, carbon beds, and gold amalgamation generally vary for different assumed mercury feedrates and for different offgas flowrates. Assuming that these technologies can in fact provide the necessary mercury control performance, each of these technologies may be less costly than the others for certain mercury feedrates and the offgas flowrates

  8. Hazards Control Department annual technology review, 1987

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, R.V.; Anderson, K.J. (eds.)

    1988-07-01

    This document describes some of the research performed in the LLNL Hazards Control Department from October 1986 to September 1987. The sections in the Annual report cover scientific concerns in the areas of Health Physics, Industrial Hygiene, Industrial Safety, Aerosol Science, Resource Management, Dosimetry and Radiation Physics, Criticality Safety, and Fire Science. For a broader overview of the types of work performed in the Hazards Control Department, we have also compiled a selection of abstracts of recent publications by Hazards Control employees. Individual reports are processed separately for the data base.

  9. 15 CFR 742.5 - Missile technology.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Missile technology. 742.5 Section 742... BASED CONTROLS § 742.5 Missile technology. (a) License requirements. (1) In support of U.S. foreign... establish the existence of a contract. (d) Missile Technology Control Regime. Missile Technology Control...

  10. Control system in the technological electron linacs

    International Nuclear Information System (INIS)

    Boriskin, V.N.; Akchurin, Yu.I.; Bahmetev, N.N.; Gurin, V.A.

    1999-01-01

    The special system has been developed for linac control.It controls the electron beam current,the energy and the position,protects the accelerating and scanning systems from the damage caused by the beam;blocks the modulator and the klystron amplifier in the case of intolerable operating modes;regulates the phase and power of the HF signals in the injecting system and also regulates the source power currents in the magnetic system

  11. Exploring the physical controls of regional patterns of flow duration curves – Part 3: A catchment classification system based on regime curve indicators

    Directory of Open Access Journals (Sweden)

    M. Sivapalan

    2012-11-01

    Full Text Available Predictions of hydrological responses in ungauged catchments can benefit from a classification scheme that can organize and pool together catchments that exhibit a level of hydrologic similarity, especially similarity in some key variable or signature of interest. Since catchments are complex systems with a level of self-organization arising from co-evolution of climate and landscape properties, including vegetation, there is much to be gained from developing a classification system based on a comparative study of a population of catchments across climatic and landscape gradients. The focus of this paper is on climate seasonality and seasonal runoff regime, as characterized by the ensemble mean of within-year variation of climate and runoff. The work on regime behavior is part of an overall study of the physical controls on regional patterns of flow duration curves (FDCs, motivated by the fact that regime behavior leaves a major imprint upon the shape of FDCs, especially the slope of the FDCs. As an exercise in comparative hydrology, the paper seeks to assess the regime behavior of 428 catchments from the MOPEX database simultaneously, classifying and regionalizing them into homogeneous or hydrologically similar groups. A decision tree is developed on the basis of a metric chosen to characterize similarity of regime behavior, using a variant of the Iterative Dichotomiser 3 (ID3 algorithm to form a classification tree and associated catchment classes. In this way, several classes of catchments are distinguished, in which the connection between the five catchments' regime behavior and climate and catchment properties becomes clearer. Only four similarity indices are entered into the algorithm, all of which are obtained from smoothed daily regime curves of climatic variables and runoff. Results demonstrate that climate seasonality plays the most significant role in the classification of US catchments, with rainfall timing and climatic aridity index

  12. Control of technology as a public and private task

    International Nuclear Information System (INIS)

    Kirchhof, P.

    1988-01-01

    In the opinion of the author the control of technology is as well a public as a private task. But due to the constitutional order first of all it is incumbent on the state to control technical installations. This state supervisory function cannot be replaced by private self-control. (WG) [de

  13. Elastic optical networks architectures, technologies, and control

    CERN Document Server

    Velasco, Luis

    2016-01-01

    This book addresses challenges and potential solutions surrounding the dramatic yearly increases in bandwidth demand. The editors discuss the predicament surrounding current growth, which is predicted to continue because of the proliferation of disruptive, high bandwidth applications like video and cloud applications. They also discuss that in addition to growth, traffic will become much more dynamic, both in time and direction. The contributors show how large changes in traffic magnitude during a 24-hour period can be observed, as day-time business users have very different demands to evening-time residential customers, and how this plays into addressing future challenges. In addition, they discuss potential solutions for the issues surrounding situations where multiple content and cloud service providers offer competing services, causing the traffic direction to become more dynamic. The contributors discuss that although the WDM transponder technology can be upgraded to 100Gb/s in the short to medium term, ...

  14. Development of environmental radiation control technology

    International Nuclear Information System (INIS)

    Han, M. H.; Kim, E. H.; Keum, D. K.; Kang, M. J.; Jang, B. W.

    2010-04-01

    The objectives of the study are to development of an urban atmospheric dispersion model and data assimilation technique for improving the reliability, to develop the technology for assessing the radiation impact to biota and the surface water transport model, to develop the analytical techniques for the indicator radionuclides on decommissioning of nuclear facilities and nuclear waste disposal sites and to assess of the national environmental radiation impact and establish the optimum management bases of natural radiation. The obtained results might be used; for assessing the radiological effects due to and radiological incident in an urban area, for assessing radiation doses on biota for the environmental protection from ionizing radiation with the application of new concept of the ICP new recommendation, for analyzing the indicator radionuclides on decommissioning of nuclear facilities and nuclear waste disposal sites, and for providing the natural radionuclide database of Korea to international organizations such as UNSCEAR. It can be used for emphasizing relative nuclear safety

  15. Technology Of Controlled-Environment Agriculture

    Science.gov (United States)

    Bubenheim, David L.; Bates, Maynard E.

    1995-01-01

    Report discusses controlled-environment agriculture (CEA) for commercial production of organisms, whether plants or animals. Practiced in greenhouses to produce food on nonarable lands. Describes conceptual regenerative system that incorporates biological, physical, and chemical processes to support humans in extraterrestrial environments.

  16. Recombinant DNA technology and insect control

    International Nuclear Information System (INIS)

    Seawright, J.A.; Cockburn, Andrew F.

    1989-01-01

    In the past, the most successful avenue for the use of genetics in insect control has been the employment of the sterile insect technique, in which huge numbers of a species are produced in a factory, sterilized by exposure to ionizing radiation and released into the native habitat. this method is suitable for some species, but for logistical, economical, and biological reasons this control technique is not suitable for many economically important species. Our ability to use genetic approaches to cope with the myriad of insect pests will improve in the near future because of progress in the biochemical manipulation of genes. Molecular geneticists have created bacteria, plants, animals, and fungi that have useful new properties, and many of these are being used or tested for commercial use. A reasonable forecast is that a virtual revolution will occur in the way that we currently practice and perceive the genetic control of insects. Using genetic engineering manipulations to develop control techniques for insects of agricultural and public health importance is an exciting prospect and a highly desirable goal

  17. Locus of Control and Technology Adoption in Developing Country Agriculture

    DEFF Research Database (Denmark)

    Abay, Kibrom Araya; Blalock, Garrick; Berhane, Guush

    2017-01-01

    and psychological explanations for the low rates of adoption of profitable agricultural technologies in Sub-Saharan Africa. Our results highlight that improving farmers’ non-cognitive skills (locus of control) may facilitate technology adoption and agricultural transformation. More generally, the results suggest...

  18. Profitability of soil erosion control technologies in eastern Uganda ...

    African Journals Online (AJOL)

    The lack of farmer awareness of costs and benefits associated with the use of sustainable land management (SLM) technologies is one of the major constraints to technology adoption in sub-Saharan Africa. The objective of this study was to estimate the profitability of application of SLM in the form of soil erosion control ...

  19. Adaptive Controller Design for Faulty UAVs via Quantum Information Technology

    Directory of Open Access Journals (Sweden)

    Fuyang Chen

    2012-12-01

    Full Text Available In this paper, an adaptive controller is designed for a UAV flight control system against faults and parametric uncertainties based on quantum information technology and the Popov hyperstability theory. First, considering the bounded control input, the state feedback controller is designed to make the system stable. The model of adaptive control is introduced to eliminate the impact by the uncertainties of system parameters via quantum information technology. Then, according to the model reference adaptive principle, an adaptive control law based on the Popov hyperstability theory is designed. This law enable better robustness of the flight control system and tracking control performances. The closed-loop system's stability is guaranteed by the Popov hyperstability theory. The simulation results demonstrate that a better dynamic performance of the UAV flight control system with faults and parametric uncertainties can be maintained with the proposed method.

  20. APPLICATION OF MODEM INFORMATION TECHNOLOGIES IN THE ENTERPRISE CONTROL

    Directory of Open Access Journals (Sweden)

    A. E. Nikiforov

    2007-01-01

    Full Text Available The modern technologies of the enterprise control help to make the process of taking decisions more correct and reasonable, promote better understanding of real situations and appropriate response to them.

  1. Numerical simulation of intelligent compaction technology for construction quality control.

    Science.gov (United States)

    2014-12-01

    Intelligent compaction (IC) technique is a fast-developing technology for compaction quality control and acceptance. Proof rolling using the intelligent compaction rollers after completing compaction can eectively identify : the weak spots and sig...

  2. The realism between the image technologies and the scopic regimes: photography, cinema and the “imagery turnaround” of the 19th century O realismo entre as tecnologias da imagem e os regimes de visualidade: fotografia, cinema e a “virada imagética” do Século XIX

    Directory of Open Access Journals (Sweden)

    Daniel B. Portugal

    2011-12-01

    Full Text Available The article begins with a discussion of theoretical and methodological concerning about the relation between scopic regimes and image technologies. Then, it questions the objectivity of the notion of realism and, avoiding technological deterministic approaches, seeks to analyze some historical transformations that deeply affect the scopic regimes in the 19th century and that may help to explain why, in this specific moment, the development of the photography and afterwards, of the cinema became viable, thinkable and desirable. O artigo começa com uma discussão de cunho teóricometodológico acerca da relação entre regimes de visualidade etecnologias da imagem. Em seguida, questiona a objetividade da noção de “realismo” e, rechaçando o determinismo tecnológico, procura analisar algumas transformações históricas que afetaram profundamente os regimes de visualidade do século XIX e que podem ajudar a explicar porque, neste momento, tornou-se viável, pensável e desejável o desenvolvimento da fotografia e, posteriormente, do cinema.

  3. NOVEL TECHNOLOGIES FOR GASEOUS CONTAMINANTS CONTROL; FINAL

    International Nuclear Information System (INIS)

    B.S. Turk; T. Merkel; A. Lopez-Ortiz; R.P. Gupta; J.W. Portzer; G.N. Krishnan; B.D. Freeman; G.K. Fleming

    2001-01-01

    The overall objective of this project is to develop technologies for cleaning/conditioning the syngas from an integrated gasification combined cycle (IGCC) system to meet the tolerance limits for contaminants such as H(sub 2)S, COS, NH(sub 3), HCN, HCl, and alkali for fuel cell and chemical production applications. RTI's approach is to develop a modular system that (1) removes reduced sulfur species to sub-ppm levels using a hybrid process consisting of a polymer membrane and a regenerable ZnO-coated monolith or a mixed metal oxide sorbent; (2) removes hydrogen chloride vapors to sub-ppm levels using an inexpensive, high-surface area material; and (3) removes NH(sub 3) with acidic adsorbents. RTI is working with MEDAL, Inc., and North Carolina State University (NCSU) to develop polymer membrane technology for bulk removal of H(sub 2)S from syngas. These membranes are being engineered to remove the acid gas components (H(sub 2)S, CO(sub 2), NH(sub 3), and H(sub 2)O) from syngas by focusing on the ''solubility selectivity'' of the novel polymer compositions. The desirable components of the syngas (H(sub 2) and CO) are maintained at high-pressure conditions as a non-permeate stream while the impurities are transported across the membrane to the low pressure side. RTI tested commercially available and novel materials from MEDAL using a high-temperature, high-pressure (HTHP) permeation apparatus. H(sub 2)S/H(sub 2) selectivities and gt;30 were achieved, although there was a strong negative dependence with temperature. MEDAL believes that all the polymer compositions tested so far can be prepared as hollow fiber membrane modules using the existing manufacturing technology. For fuel cell and chemical applications, additional sulfur removal (beyond that achievable with the membranes) is required. To overcome limitations of conventional ZnO pellets, RTI is testing a monolith with a thin coating of high surface area zinc-oxide based materials. Alternatively, a regenerable

  4. Applications of aerospace technology in industry, a technology transfer profile: Contamination control

    Science.gov (United States)

    1971-01-01

    The strong influence NASA-sponsored research has had on the development of solutions to difficult contamination problems is considered. The contamination control field is comprised of an industrial base, supplying the tools of control; a user base, adopting control techniques; and a technical base, expanding the concepts of control. Both formal and informal mechanisms used by NASA to communicate a variety of technical advances are reviewed and certain examples of the expansion of the user base through technology transfer are given. Issues related to transfer of NASA-generated contamination control technology are emphasized.

  5. Siemens: Smart Technologies for Large Control Systems

    CERN Multimedia

    CERN. Geneva; BAKANY, Elisabeth

    2015-01-01

    The CERN Large Hadron Collider (LHC) is known to be one of the most complex scientific machines ever built by mankind. Its correct functioning relies on the integration of a multitude of interdependent industrial control systems, which provide different and essential services to run and protect the accelerators and experiments. These systems have to deal with several millions of data points (e.g. sensors, actuators, configuration parameters, etc…) which need to be acquired, processed, archived and analysed. Since more than 20 years, CERN and Siemens have developed a strong collaboration to deal with the challenges for these large systems. The presentation will cover the current work on the SCADA (Supervisory Control and Data Acquisition) systems and Data Analytics Frameworks.

  6. International Conference on Systems, Control and Information Technologies 2016

    CERN Document Server

    Kaliczyńska, Małgorzata

    2017-01-01

    This book presents the proceedings of the International Conference on Systems, Control and Information Technologies 2016. It includes research findings from leading experts in the fields connected with INDUSTRY 4.0 and its implementation, especially: intelligent systems, advanced control, information technologies, industrial automation, robotics, intelligent sensors, metrology and new materials. Each chapter offers an analysis of a specific technical problem followed by a numerical analysis and simulation as well as the implementation for the solution of a real-world problem.

  7. Development of Plant Control Diagnosis Technology and Increasing Its Applications

    Science.gov (United States)

    Kugemoto, Hidekazu; Yoshimura, Satoshi; Hashizume, Satoru; Kageyama, Takashi; Yamamoto, Toru

    A plant control diagnosis technology was developed to improve the performance of plant-wide control and maintain high productivity of plants. The control performance diagnosis system containing this technology picks out the poor performance loop, analyzes the cause, and outputs the result on the Web page. Meanwhile, the PID tuning tool is used to tune extracted loops from the control performance diagnosis system. It has an advantage of tuning safely without process changes. These systems are powerful tools to do Kaizen (continuous improvement efforts) step by step, coordinating with the operator. This paper describes a practical technique regarding the diagnosis system and its industrial applications.

  8. NOVEL TECHNOLOGIES FOR GASEOUS CONTAMINANTS CONTROL

    Energy Technology Data Exchange (ETDEWEB)

    B.S. Turk; T. Merkel; A. Lopez-Ortiz; R.P. Gupta; J.W. Portzer; G.N. Krishnan; B.D. Freeman; G.K. Fleming

    2001-09-30

    The overall objective of this project is to develop technologies for cleaning/conditioning the syngas from an integrated gasification combined cycle (IGCC) system to meet the tolerance limits for contaminants such as H{sub 2}S, COS, NH{sub 3}, HCN, HCl, and alkali for fuel cell and chemical production applications. RTI's approach is to develop a modular system that (1) removes reduced sulfur species to sub-ppm levels using a hybrid process consisting of a polymer membrane and a regenerable ZnO-coated monolith or a mixed metal oxide sorbent; (2) removes hydrogen chloride vapors to sub-ppm levels using an inexpensive, high-surface area material; and (3) removes NH{sub 3} with acidic adsorbents. RTI is working with MEDAL, Inc., and North Carolina State University (NCSU) to develop polymer membrane technology for bulk removal of H{sub 2}S from syngas. These membranes are being engineered to remove the acid gas components (H{sub 2}S, CO{sub 2}, NH{sub 3}, and H{sub 2}O) from syngas by focusing on the ''solubility selectivity'' of the novel polymer compositions. The desirable components of the syngas (H{sub 2} and CO) are maintained at high-pressure conditions as a non-permeate stream while the impurities are transported across the membrane to the low pressure side. RTI tested commercially available and novel materials from MEDAL using a high-temperature, high-pressure (HTHP) permeation apparatus. H{sub 2}S/H{sub 2} selectivities >30 were achieved, although there was a strong negative dependence with temperature. MEDAL believes that all the polymer compositions tested so far can be prepared as hollow fiber membrane modules using the existing manufacturing technology. For fuel cell and chemical applications, additional sulfur removal (beyond that achievable with the membranes) is required. To overcome limitations of conventional ZnO pellets, RTI is testing a monolith with a thin coating of high surface area zinc-oxide based materials

  9. Design of coordinated controller in nuclear power plant based on digital instrument and control technology

    International Nuclear Information System (INIS)

    Cheng Shouyu; Peng Minjun; Liu Xinkai; Zhao Qiang; Deng Xiangxin

    2014-01-01

    Nuclear power plant (NPP) is a multi-input and multi-output, no-linear and time-varying complex system. The conventional PID controller is usually used in NPP control system which is based on analog instrument. The system parameters are easy to overshoot and the response time is longer in the control mode of the conventional PID. In order to improve this condition, a new coordinated control strategy which is based on expert system and the original controllers in the digital instrument and control technology was presented. In order to verify and validate it, the proposed coordinated control technology was tested by the full-scope real-time simulation system. The results prove that using digital instrument and control technology to achieve coordinated controller is feasible, the coordinated controller can effectively improve the dynamic operating characteristics of the system, and the coordinated controller is superior to the conventional PID controller in control performance. (authors)

  10. Integrated Tools for Future Distributed Engine Control Technologies

    Science.gov (United States)

    Culley, Dennis; Thomas, Randy; Saus, Joseph

    2013-01-01

    Turbine engines are highly complex mechanical systems that are becoming increasingly dependent on control technologies to achieve system performance and safety metrics. However, the contribution of controls to these measurable system objectives is difficult to quantify due to a lack of tools capable of informing the decision makers. This shortcoming hinders technology insertion in the engine design process. NASA Glenn Research Center is developing a Hardware-inthe- Loop (HIL) platform and analysis tool set that will serve as a focal point for new control technologies, especially those related to the hardware development and integration of distributed engine control. The HIL platform is intended to enable rapid and detailed evaluation of new engine control applications, from conceptual design through hardware development, in order to quantify their impact on engine systems. This paper discusses the complex interactions of the control system, within the context of the larger engine system, and how new control technologies are changing that paradigm. The conceptual design of the new HIL platform is then described as a primary tool to address those interactions and how it will help feed the insertion of new technologies into future engine systems.

  11. Toner display based on particle control technologies

    Science.gov (United States)

    Kitamura, Takashi

    2011-03-01

    Toner Display is based on an electrical movement of charged particles. Two types of black toner and white particles charged in the different electric polarity are enclosed between two electrodes. The particle movement is controlled by the external electric field applied between two transparent electrodes. The toner is collected to the electrode by an electrostatic force across the insulating layer to display a black image. The toners can be put back to the counter electrode by applying a reverse electric field, and white solid image is displayed. We have studied on the movement of three color particles independently to display color image in Toner Display. Two positively charged color particles with different amount of charge to mass ratio and negatively charged white particles were enclosed in the toner display cell. Yellow, cyan and white images were displayed by an application of voltage.

  12. Intelligent control and automation technology for nuclear applications

    International Nuclear Information System (INIS)

    Kim, Jae Hui; Huh, Young Hwan; Lee, Jang Soo; Kim, Ko Ryeo; Cha, Kyoung Ho; Lee, Jae Cheol; Dong, In Sook

    1993-01-01

    This project intends to establish the basic technology of intelligent control and automation to be applied to the next generation nuclear plant. For that, the research status of those technologies is surveyed for various application areas at first. The characteristics and availability of those techniques such as neural network, fuzzy rule based control and reasoning, multimedia, real-time software and qualitative modelling are studied through a series of simulations and experiments. By integrating each technologies studied above, we developed a hierarchical, intelligent control system for an autonomous mobile robot as a test bed. The system is composed of several modules of software and hardware subsystems, which are implemented by use of the intelligent techniques. Through the analysis of the results and experiences, we investigated the feasibility of application of the basic technology to the next generation plant. (Author)

  13. New technology for BWR power plant control and instrumentation

    International Nuclear Information System (INIS)

    Takano, Yoshiyuki; Nakamura, Makoto; Murata, Fumio.

    1992-01-01

    Nuclear power plants are facing strong demands for higher reliability and cost-performance in their control and instrumentation systems. To meet these needs, Hitachi is developing advanced control and instrumentation technology by rationalizing the conventional technology in that field. The rationalization is done through the utilization of reliable digital technology and optical transmission technology, and others, which are now commonly used in computer applications. The goal of the development work is to ensure safe, stable operation of the plant facilities and to secure harmony between man and machine. To alleviate the burdens of the operators, the latest electronic devices are being employed to create an advanced man-machine interface, and to promote automatic operation of the plant based upon the automatic operation of individual systems. In addition, the control and instrumentation system, including the safety system, incorporates more and more digital components in order to further enhance the reliability and maintainability of the plant. (author)

  14. Research on NC motion controller based on SOPC technology

    Science.gov (United States)

    Jiang, Tingbiao; Meng, Biao

    2006-11-01

    With the rapid development of the digitization and informationization, the application of numerical control technology in the manufacturing industry becomes more and more important. However, the conventional numerical control system usually has some shortcomings such as the poor in system openness, character of real-time, cutability and reconfiguration. In order to solve these problems, this paper investigates the development prospect and advantage of the application in numerical control area with system-on-a-Programmable-Chip (SOPC) technology, and puts forward to a research program approach to the NC controller based on SOPC technology. Utilizing the characteristic of SOPC technology, we integrate high density logic device FPGA, memory SRAM, and embedded processor ARM into a single programmable logic device. We also combine the 32-bit RISC processor with high computing capability of the complicated algorithm with the FPGA device with strong motivable reconfiguration logic control ability. With these steps, we can greatly resolve the defect described in above existing numerical control systems. For the concrete implementation method, we use FPGA chip embedded with ARM hard nuclear processor to construct the control core of the motion controller. We also design the peripheral circuit of the controller according to the requirements of actual control functions, transplant real-time operating system into ARM, design the driver of the peripheral assisted chip, develop the application program to control and configuration of FPGA, design IP core of logic algorithm for various NC motion control to configured it into FPGA. The whole control system uses the concept of modular and structured design to develop hardware and software system. Thus the NC motion controller with the advantage of easily tailoring, highly opening, reconfigurable, and expandable can be implemented.

  15. Distributed automatic control of technological processes in conditions of weightlessness

    Science.gov (United States)

    Kukhtenko, A. I.; Merkulov, V. I.; Samoylenko, Y. I.; Ladikov-Royev, Y. P.

    1986-01-01

    Some problems associated with the automatic control of liquid metal and plasma systems under conditions of weightlessness are examined, with particular reference to the problem of stability of liquid equilibrium configurations. The theoretical fundamentals of automatic control of processes in electrically conducting continuous media are outlined, and means of using electromagnetic fields for simulating technological processes in a space environment are discussed.

  16. Advances in control system technology for aerospace applications

    CERN Document Server

    2016-01-01

    This book is devoted to Control System Technology applied to aerospace and covers the four disciplines Cognitive Engineering, Computer Science, Operations Research, and Servo-Mechanisms. This edited book follows a workshop held at the Georgia Institute of Technology in June 2012, where the today's most important aerospace challenges, including aerospace autonomy, safety-critical embedded software engineering, and modern air transportation were discussed over the course of two days of intense interactions among leading aerospace engineers and scientists. Its content provide a snapshot of today's aerospace control research and its future, including Autonomy in space applications, Control in space applications, Autonomy in aeronautical applications, Air transportation, and Safety-critical software engineering.

  17. Technology of environmental pollution control, 2nd edition

    International Nuclear Information System (INIS)

    Shaheen, E.I.

    1991-01-01

    The final decade of the 20th century is truly the environmental decade of the century because of the gravity of environmental challenges we are facing. This book covers the environmental spectrum in an attempt to update the reader on new technologies and topics regarding pollution control. Engineers, scientists, plant operators, and students studying the subject of pollution control will use the comprehensive text as a reference for technological advances, regulations, and pollution control. The major disasters witnessed in the last few years, such as the Bhopal gas tragedy, the Chernobyl nuclear disaster, the Exxon Valdez oil spill and the Ashland of tank collapse are described in detail

  18. INL Control System Situational Awareness Technology Annual Report 2012

    Energy Technology Data Exchange (ETDEWEB)

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin; Robert Erbes

    2012-10-01

    The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

  19. Dust control technology usage patterns in the drywall finishing industry.

    Science.gov (United States)

    Young-Corbett, Deborah E; Nussbaum, Maury A

    2009-06-01

    A telephone survey was conducted to quantify drywall finishing industry usage rates of dust control technology, identify barriers to technology adoption, and explore firm owner perception of risk. Industry use of the following technologies was described: wet methods, respiratory protection, pole sanders, ventilated sanders, and low-dust joint compound. A survey instrument composed of both Likert-type scaled items and open-ended items was developed and administered by telephone to the census population of the owners of member firms of trade associations: Finishing Contractors Association and Association of the Wall and Ceiling Industries. Of 857 firms, 264 interviews were completed. Along with descriptive statistics, results were analyzed to examine effects of firm size and union affiliation on responses. Responses to open-ended items were analyzed using content analysis procedures. Firm owners rated the risk of dust to productivity and customer satisfaction as low-moderate. Half rated the dust as having some impact on worker health, with higher impacts indicated by owners of small firms. Among the available control technologies, respiratory protection was used most frequently. Several barriers to implementation of the more effective control technologies were identified. Barriers associated with technology usability, productivity, and cost, as well as misperceptions of risk, should be addressed to improve dust control in the drywall finishing industry.

  20. Propulsion/flight control integration technology (PROFIT) software system definition

    Science.gov (United States)

    Carlin, C. M.; Hastings, W. J.

    1978-01-01

    The Propulsion Flight Control Integration Technology (PROFIT) program is designed to develop a flying testbed dedicated to controls research. The control software for PROFIT is defined. Maximum flexibility, needed for long term use of the flight facility, is achieved through a modular design. The Host program, processes inputs from the telemetry uplink, aircraft central computer, cockpit computer control and plant sensors to form an input data base for use by the control algorithms. The control algorithms, programmed as application modules, process the input data to generate an output data base. The Host program formats the data for output to the telemetry downlink, the cockpit computer control, and the control effectors. Two applications modules are defined - the bill of materials F-100 engine control and the bill of materials F-15 inlet control.

  1. Recent development of plasma pollution control technology: a critical review

    Directory of Open Access Journals (Sweden)

    Jen-Shih Chang

    2001-01-01

    Full Text Available Gaseous pollution control, solid and liquid waste treatments have been commercialized based on incineration, catalysis, adsorption, disposal with landfill, etc. More recently technology based on plasmas has become significant due to the advantages such as lower costs, higher treatment and energy efficiencies, smaller space volume, etc. In order to commercialize this new technology, the treatment rate, energy efficiency of treatment, pressure drop of reactor, reusable by-products production rate, must be improved, based on the identifications of major fundamental mechanism of processes, optimizations of reactor, and power supply for an integrated system. In this work, recent development of plasma pollution control technology was critically reviewed and the principle of processes and reactor technologies were outlined. Special attention will be focused on material processing generated pollutants.

  2. Detection Technologies, Arms control and nonproliferation technologies. Third/fourth quarters 1993

    Energy Technology Data Exchange (ETDEWEB)

    Staehle, G; Stull, S; Talaber, C; Moulthrop, P [eds.

    1993-12-31

    This issue of Arms Control and Nonproliferation Technologies is another in a series of issues about specific means for detecting and identifying proliferation and other suspect activities outside the realm of arms control treaties. All the projects discussed are funded by the Office of Research and Development of the Department of Energy`s Office of Nonproliferation and National Security.

  3. Technologies options for acid-rain control. Book chapter

    International Nuclear Information System (INIS)

    Princiotta, F.T.

    1992-01-01

    The report discusses acid rain control options available to the electric utility industry. They include coal switching, flue gas desulfurization, and such emerging lower cost technologies as Limestone Injection Multistage Burners (LIMB) and Advanced Silicate (ADVACATE), both developed by EPA, selective use of gas to reduce nitrogen oxides (NOx) and sulfur dioxide (SO2) in coal-fired boilers, and the use of Integrated Coal Gasification Combined Cycle (IGCC) technology

  4. Application of Autonomous Spacecraft Power Control Technology to Terrestrial Microgrids

    Science.gov (United States)

    Dever, Timothy P.; Trase, Larry M.; Soeder, James F.

    2014-01-01

    This paper describes the potential of the power campus located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio for microgrid development. First, the benefits provided by microgrids to the terrestrial power grid are described, and an overview of Technology Needs for microgrid development is presented. Next, GRC's work on development of autonomous control for manned deep space vehicles, which are essentially islanded microgrids, is covered, and contribution of each of these developments to the microgrid Technology Needs is detailed. Finally, a description is provided of GRC's existing physical assets which can be applied to microgrid technology development, and a phased plan for development of a microgrid test facility is presented.

  5. Technology in the policy process - controlling nuclear power

    International Nuclear Information System (INIS)

    Collingridge, D.

    1983-01-01

    The discussion in this book is built around nuclear power. The technology of nuclear power is shown to have features which make it inflexible in the sense that, once built, it is difficult and expensive to control. If inflexible technology is to be avoided, it is crucially important to be able to identify this failing at an early stage in the technology's development, before it has acquired an immunity to political control. Again, this problem is approached through the example of nuclear power, in particular the breeder reactor. The breeder is shown to be even less flexible than today's nuclear technology, because it will have higher capital costs, be of greater capital intensity, longer lead time, larger unit size, and will require more infrastructure for its operation. If this is developed, the breeder will be even less open to political control than the nuclear plant of the present. To put it another way, its planning will be even more open to errors and whatever errors are made will be even more costly than for existing nuclear technology. It is therefore even less of a socially and economically acceptable technology than today's nuclear power. (author)

  6. Universal CNC platform motion control technology for industrial CT

    International Nuclear Information System (INIS)

    Cheng Senlin; Wang Yang

    2011-01-01

    According to the more scanning methods and the higher speed of industrial CT, the higher precision of the motion location and the data collection sync-control is required at present, a new motion control technology was proposed, which was established based on the universal CNC system with high precision of multi-axis control. Aiming at the second and the third generation of CT scanning motion, a control method was researched, and achieved the demands of the changeable parameters and network control, Through the simulation of the second and the third generation of CT scanning motion process, the control precision of the rotation axis reached 0.001° and the linear axis reached 0.002 mm, Practical tests showed this system can meet the requirements of the multi-axis motion integration and the sync signal control, it also have advantages in the control precision and the performance. (authors)

  7. Technological and life cycle assessment of organics processing odour control technologies

    International Nuclear Information System (INIS)

    Bindra, Navin; Dubey, Brajesh; Dutta, Animesh

    2015-01-01

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  8. Technological and life cycle assessment of organics processing odour control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  9. Energy-saving technology of vector controlled induction motor based on the adaptive neuro-controller

    Science.gov (United States)

    Engel, E.; Kovalev, I. V.; Karandeev, D.

    2015-10-01

    The ongoing evolution of the power system towards a Smart Grid implies an important role of intelligent technologies, but poses strict requirements on their control schemes to preserve stability and controllability. This paper presents the adaptive neuro-controller for the vector control of induction motor within Smart Gird. The validity and effectiveness of the proposed energy-saving technology of vector controlled induction motor based on adaptive neuro-controller are verified by simulation results at different operating conditions over a wide speed range of induction motor.

  10. Applying Distributed Object Technology to Distributed Embedded Control Systems

    DEFF Research Database (Denmark)

    Jørgensen, Bo Nørregaard; Dalgaard, Lars

    2012-01-01

    In this paper, we describe our Java RMI inspired Object Request Broker architecture MicroRMI for use with networked embedded devices. MicroRMI relieves the software developer from the tedious and error-prone job of writing communication protocols for interacting with such embedded devices. MicroR...... in developing control systems for distributed embedded platforms possessing severe resource restrictions.......RMI supports easy integration of high-level application specific control logic with low-level device specific control logic. Our experience from applying MicroRMI in the context of a distributed robotics control application, clearly demonstrates that it is feasible to use distributed object technology...

  11. Development of radioisotope tracer technology and nucleonic control system

    International Nuclear Information System (INIS)

    Jin, Joon Ha; Lee, Myun Joo; Jung, Sung Hee and others

    1999-04-01

    The purpose of this study is to develop the radioisotope tracer technology, which can be used in solving industrial and environmental problems and basic technology of nuclear control systems that are widely used for automation of industrial plants, and to build a strong tracer group to support the local industries. In relation to the tracer technology, the data acquisition system, the column scanning equipment and the detection pig for a leakage test have been developed. In order to use in analyzing data of tracer experiments, a computer program for the analysis of residence time distribution has been created as well. These results were utilized in developing the tracer technologies, such as the column scanning, the flow measurement using the dilution method, the simultaneous monitoring rotational movement of piston rings and the optimization of a waste water treatment facility, and the technologies were successfully demonstrated in the local industrial. The stripper of RFCC reactor has been examined to find an unwanted structure in it by imminent request from the industry. Related to the development of nucleonic control system, the state of art report on the technology has been written and an equipment for the analysis of asphalt content has been developed. (author)

  12. Fuzzy controllers in the control system of a brushless electric motor using HIL technology

    Directory of Open Access Journals (Sweden)

    Kalach Gennady

    2017-01-01

    Full Text Available This article proposes a method for creation of a control system for a brushless electric motor based on a fuzzy logic apparatus. The use of a fuzzy controller in this case can increase stability and improve the quality of the system under consideration, which was implemented in the Simulink environment using HIL technology. This technology increases the chances of successfully passing the test phase, considering the control system in prototype.

  13. En-Tegrity - Advanced subsea well control technology

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Jeff

    2010-07-01

    Shear Seal Valve: En-Tegrity - Advanced subsea well control technology. With the growing complexity of well interventions operations such as zone isolations, chemical treatment, sand removal and side track re-completion drilling, there is an increasing demand for an efficient light well intervention service equipment. This paper details the design, development and qualification program undertaken to introduce a new technology for well interventions operations. The Shear Seal Valve provides dual barrier sealing integrity that is capable of cutting large diameter coiled tubing, drill pipe and intervention tooling within a single compact housing. The hydraulic design of the valve minimizes operating volumes and negates the requirement for mechanical ram locks therefore greatly simplifying control system complexity. Utilizing dual metal to metal sealing technology and a fail safe close rational the system is ideally suited to HPHT applications providing optimum operational integrity. (Author)

  14. Integrating of renewable energy in operation system: the Special Regime Control Centre (CECRE); Integracion de la energia renovable en la operacion del sistema: El Centro de Control de regimen especial (CECRE)

    Energy Technology Data Exchange (ETDEWEB)

    Division, M.

    2007-07-01

    The implementation of Red Electrica de Espana Special Regime Control Centre (CECRE) has demonstrated the Spanish System Operators commitment of integrating the maximum possible wind power generation into the electrical system compatible with secure operation. With this leadership initiative,for the first time in the world, a System Operator Control Centre (CECRE) has succeeded in sending power control instructions to wind power generators over the country through Generation Control Centres (CGC) to which these generators must be connected complying with the Spanish Rules. (Author)

  15. profitability of soil erosion control technologies in eastern uganda ...

    African Journals Online (AJOL)

    Prof. Adipala Ekwamu

    study was to estimate the profitability of application of SLM in the form of soil erosion control technologies by communities in the highlands of eastern Uganda; a hot spot for this land degradation agent. A survey was conducted using 240 farmers in the highlands of eastern Uganda. The findings from Partial Budget Analysis.

  16. Economics of selected water control technologies and their ...

    African Journals Online (AJOL)

    Using a production function, marginal productivity of farm inputs and benefit-cost analysis, we explore the economics of selected water control technologies. From the production function, all farm inputs, including irrigation water is found to have a significant and positive effect on yield. Marginal value products of farm inputs ...

  17. Imazapyr-resistant maize technology adoption for witch weed control ...

    African Journals Online (AJOL)

    Saharan Africa. A new technology known as imazapyr-resistant maize (IRM) has proven to be effective in controlling it. This study examined the status of IRM adoption in western Kenya. A cross sectional survey that included 600 households, ...

  18. Integration of advanced teleoperation technologies for control of space robots

    Science.gov (United States)

    Stagnaro, Michael J.

    1993-01-01

    Teleoperated robots require one or more humans to control actuators, mechanisms, and other robot equipment given feedback from onboard sensors. To accomplish this task, the human or humans require some form of control station. Desirable features of such a control station include operation by a single human, comfort, and natural human interfaces (visual, audio, motion, tactile, etc.). These interfaces should work to maximize performance of the human/robot system by streamlining the link between human brain and robot equipment. This paper describes development of a control station testbed with the characteristics described above. Initially, this testbed will be used to control two teleoperated robots. Features of the robots include anthropomorphic mechanisms, slaving to the testbed, and delivery of sensory feedback to the testbed. The testbed will make use of technologies such as helmet mounted displays, voice recognition, and exoskeleton masters. It will allow tor integration and testing of emerging telepresence technologies along with techniques for coping with control link time delays. Systems developed from this testbed could be applied to ground control of space based robots. During man-tended operations, the Space Station Freedom may benefit from ground control of IVA or EVA robots with science or maintenance tasks. Planetary exploration may also find advanced teleoperation systems to be very useful.

  19. Use of Soft Computing Technologies For Rocket Engine Control

    Science.gov (United States)

    Trevino, Luis C.; Olcmen, Semih; Polites, Michael

    2003-01-01

    The problem to be addressed in this paper is to explore how the use of Soft Computing Technologies (SCT) could be employed to further improve overall engine system reliability and performance. Specifically, this will be presented by enhancing rocket engine control and engine health management (EHM) using SCT coupled with conventional control technologies, and sound software engineering practices used in Marshall s Flight Software Group. The principle goals are to improve software management, software development time and maintenance, processor execution, fault tolerance and mitigation, and nonlinear control in power level transitions. The intent is not to discuss any shortcomings of existing engine control and EHM methodologies, but to provide alternative design choices for control, EHM, implementation, performance, and sustaining engineering. The approaches outlined in this paper will require knowledge in the fields of rocket engine propulsion, software engineering for embedded systems, and soft computing technologies (i.e., neural networks, fuzzy logic, and Bayesian belief networks), much of which is presented in this paper. The first targeted demonstration rocket engine platform is the MC-1 (formerly FASTRAC Engine) which is simulated with hardware and software in the Marshall Avionics & Software Testbed laboratory that

  20. Coal surface control for advanced physical fine coal cleaning technologies

    Energy Technology Data Exchange (ETDEWEB)

    Morsi, B.I.; Chiang, S.H.; Sharkey, A.; Blachere, J.; Klinzing, G.; Araujo, G.; Cheng, Y.S.; Gray, R.; Streeter, R.; Bi, H.; Campbell, P.; Chiarlli, P.; Ciocco, M.; Hittle, L.; Kim, S.; Kim, Y.; Perez, L.; Venkatadri, R.

    1992-01-01

    This final report presents the research work carried out on the Coal Surface Control for Advanced Physical Fine Coal Cleaning Technologies project, sponsored by the US Department of Energy, Pittsburgh Energy Technology Center (DOE/PETC). The project was to support the engineering development of the selective agglomeration technology in order to reduce the sulfur content of US coals for controlling SO[sub 2] emissions (i.e., acid rain precursors). The overall effort was a part of the DOE/PETCs Acid Rain Control Initiative (ARCI). The overall objective of the project is to develop techniques for coal surface control prior to the advanced physical fine coal cleaning process of selective agglomeration in order to achieve 85% pyrite sulfur rejection at an energy recovery greater than 85% based on run-of-mine coal. The surface control is meant to encompass surface modification during grinding and laboratory beneficiation testing. The project includes the following tasks: Project planning; methods for analysis of samples; development of standard beneficiation test; grinding studies; modification of particle surface; and exploratory R D and support. The coal samples used in this project include three base coals, Upper Freeport - Indiana County, PA, Pittsburgh NO. 8 - Belmont County, OH, and Illinois No. 6 - Randolph County, IL, and three additional coals, Upper Freeport - Grant County- WV, Kentucky No. 9 Hopkins County, KY, and Wyodak - Campbell County, WY. A total of 149 drums of coal were received.

  1. How Do Managers Control Technology-Intensive Work?

    Directory of Open Access Journals (Sweden)

    Angelo Bernard Pinheiro

    2010-08-01

    Full Text Available Technology pervades every aspect of the modern business enterprise and demands new strategies for work management. Advances in internet and computing technologies, the emergence of the “knowledge worker”, globalization, resource scarcity, and intense competition have led corporations to accomplish their strategic goals and objectives through the implementation of projects. Project success is assured by the effective use of financial and human resources, a project management (PM framework backed by senior management, and controls spanning the PM spectrum of initiation; planning; implementation; monitoring, measurement, and control; and closing. As an essential function of management, ‘control’ may be accomplished through a PM Plan, a project-matrix organization, competent and motivated people, and appropriate management tools and techniques. A PM Plan conforming to the Project Management Body of Knowledge (PMBOK framework incorporates controls for the key PM elements and, implemented properly, can assure project success

  2. Applying Distributed Object Technology to Distributed Embedded Control Systems

    DEFF Research Database (Denmark)

    Jørgensen, Bo Nørregaard; Dalgaard, Lars

    2012-01-01

    In this paper, we describe our Java RMI inspired Object Request Broker architecture MicroRMI for use with networked embedded devices. MicroRMI relieves the software developer from the tedious and error-prone job of writing communication protocols for interacting with such embedded devices. Micro......RMI supports easy integration of high-level application specific control logic with low-level device specific control logic. Our experience from applying MicroRMI in the context of a distributed robotics control application, clearly demonstrates that it is feasible to use distributed object technology...

  3. Impact of active controls technology on structural integrity

    Science.gov (United States)

    Noll, Thomas; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry

    1991-01-01

    This paper summarizes the findings of The Technical Cooperation Program to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting the loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle. The potential for active controls to adversely affect structural integrity is described, and load predictions obtained using two state-of-the-art analytical methods are given.

  4. Automatic technological control system of the Kolsk NPP Unit-1

    International Nuclear Information System (INIS)

    Volkov, A.P.; Dolgov, A.S.; Zinov'ev, S.V.; Ignatenko, E.I.; Katasonov, Yu.P.; Kolomtsev, Yu.V.; Mel'nikov, E.F.; Reznik, V.R.; Trofimov, B.A.

    1981-01-01

    Reconstruction of the present centralized control system with application of a new small SM2-9 computer and reactor control system ''Jailyk'' is started at the Kolsk NPP (KNPP). Presented are the flowsheet of the technological process automatic control system (TRACS) of the KNPP first generation after reconstruction, by stage diagram conducting organizational-technical measures on the TP ACS reconstruction and communication flowsheet of the IV-500 MA information subsystem with the SM2-9 computer. The TP ACS reconstruction will make it possible to obtain the unit power up to 115% from the nominal one [ru

  5. Brazil and Mexico in the Nonproliferation Regime, Common Structures and Divergent Trajectories in Latin America

    OpenAIRE

    Sotomayor, Arturo C.

    2014-01-01

    Chapter 8 There are multiple options Latin American countries to support and comply with the nuclear nonproliferation regime. At the global level, states can decide to ratify the core treaties and join their supporting institutions such as the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), the International Atomic Energy Agency (IAEA), the Comprehensive Nuclear-Test-Ban Treaty (CTBT), the Nuclear Suppliers Group (NSG), the Missile Technology Control Regime, the...

  6. Inlet Flow Control and Prediction Technologies for Embedded Propulsion Systems

    Science.gov (United States)

    McMillan, Michelle L.; Mackie, Scott A.; Gissen, Abe; Vukasinovic, Bojan; Lakebrink, Matthew T.; Glezer, Ari; Mani, Mori; Mace, James L.

    2011-01-01

    Fail-safe, hybrid, flow control (HFC) is a promising technology for meeting high-speed cruise efficiency, low-noise signature, and reduced fuel-burn goals for future, Hybrid-Wing-Body (HWB) aircraft with embedded engines. This report details the development of HFC technology that enables improved inlet performance in HWB vehicles with highly integrated inlets and embedded engines without adversely affecting vehicle performance. In addition, new test techniques for evaluating Boundary-Layer-Ingesting (BLI)-inlet flow-control technologies developed and demonstrated through this program are documented, including the ability to generate a BLI-like inlet-entrance flow in a direct-connect, wind-tunnel facility, as well as, the use of D-optimal, statistically designed experiments to optimize test efficiency and enable interpretation of results. Validated improvements in numerical analysis tools and methods accomplished through this program are also documented, including Reynolds-Averaged Navier-Stokes CFD simulations of steady-state flow physics for baseline, BLI-inlet diffuser flow, as well as, that created by flow-control devices. Finally, numerical methods were employed in a ground-breaking attempt to directly simulate dynamic distortion. The advances in inlet technologies and prediction tools will help to meet and exceed "N+2" project goals for future HWB aircraft.

  7. Survey of LWR environmental control technology performance and cost

    International Nuclear Information System (INIS)

    Heeb, C.M.; Aaberg, R.L.; Cole, B.M.; Engel, R.L.; Kennedy, W.E. Jr.; Lewallen, M.A.

    1980-03-01

    This study attempts to establish a ranking for species that are routinely released to the environment for a projected nuclear power growth scenario. Unlike comparisons made to existing standards, which are subject to frequent revision, the ranking of releases can be used to form a more logical basis for identifying the areas where further development of control technology could be required. This report describes projections of releases for several fuel cycle scenarios, identifies areas where alternative control technologies may be implemented, and discusses the available alternative control technologies. The release factors were used in a computer code system called ENFORM, which calculates the annual release of any species from any part of the LWR nuclear fuel cycle given a projection of installed nuclear generation capacity. This survey of fuel cycle releases was performed for three reprocessing scenarios (stowaway, reprocessing without recycle of Pu and reprocessing with full recycle of U and Pu) for a 100-year period beginning in 1977. The radioactivity releases were ranked on the basis of a relative ranking factor. The relative ranking factor is based on the 100-year summation of the 50-year population dose commitment from an annual release of radioactive effluents. The nonradioactive releases were ranked on the basis of dilution factor. The twenty highest ranking radioactive releases were identified and each of these was analyzed in terms of the basis for calculating the release and a description of the currently employed control method. Alternative control technology is then discussed, along with the available capital and operating cost figures for alternative control methods

  8. Specificity of continuous auditing approach on information technology internal controls

    Directory of Open Access Journals (Sweden)

    Kaćanski Slobodan

    2012-01-01

    Full Text Available Contemporary business world, can not be imagined without the use of information technology in all aspects of business. The use of information technology in manufacturing and non-production companies' activities can greatly facilitate and accelerate the process of operation and control. Because of its complexity, they possess vulnerable areas and provide space for the emergence of accidental and intentional frauds that can significantly materially affect the business decisions made by the companies' management. Implementation of internal controls can greatly reduce the level of errors that can contribute to making the wrong decisions. In order to protect the operating system, the company's management implement an internal audit to periodically examine the fundamental quality of the internal control systems. Since the internal audit, according to its character, only periodically checks quality of internal control systems and information technologies to be reported to the manager, the problem arises in the process of in wrong time reporting the management structures of the business entity. To eliminate this problem, management implements a special approach to internal audit, called continuous auditing.

  9. Application of high precision temperature control technology in infrared testing

    Science.gov (United States)

    Cao, Haiyuan; Cheng, Yong; Zhu, Mengzhen; Chu, Hua; Li, Wei

    2017-11-01

    In allusion to the demand of infrared system test, the principle of Infrared target simulator and the function of the temperature control are presented. The key technology of High precision temperature control is discussed, which include temperature gathering, PID control and power drive. The design scheme of temperature gathering is put forward. In order to reduce the measure error, discontinuously current and four-wire connection for the platinum thermal resistance are adopted. A 24-bits AD chip is used to improve the acquisition precision. Fuzzy PID controller is designed because of the large time constant and continuous disturbance of the environment temperature, which result in little overshoot, rapid response, high steady-state accuracy. Double power operational amplifiers are used to drive the TEC. Experiments show that the key performances such as temperature control precision and response speed meet the requirements.

  10. ACTS TDMA network control. [Advanced Communication Technology Satellite

    Science.gov (United States)

    Inukai, T.; Campanella, S. J.

    1984-01-01

    This paper presents basic network control concepts for the Advanced Communications Technology Satellite (ACTS) System. Two experimental systems, called the low-burst-rate and high-burst-rate systems, along with ACTS ground system features, are described. The network control issues addressed include frame structures, acquisition and synchronization procedures, coordinated station burst-time plan and satellite-time plan changes, on-board clock control based on ground drift measurements, rain fade control by means of adaptive forward-error-correction (FEC) coding and transmit power augmentation, and reassignment of channel capacities on demand. The NASA ground system, which includes a primary station, diversity station, and master control station, is also described.

  11. Embedded Web Technology: Internet Technology Applied to Real-Time System Control

    Science.gov (United States)

    Daniele, Carl J.

    1998-01-01

    The NASA Lewis Research Center is developing software tools to bridge the gap between the traditionally non-real-time Internet technology and the real-time, embedded-controls environment for space applications. Internet technology has been expanding at a phenomenal rate. The simple World Wide Web browsers (such as earlier versions of Netscape, Mosaic, and Internet Explorer) that resided on personal computers just a few years ago only enabled users to log into and view a remote computer site. With current browsers, users not only view but also interact with remote sites. In addition, the technology now supports numerous computer platforms (PC's, MAC's, and Unix platforms), thereby providing platform independence.In contrast, the development of software to interact with a microprocessor (embedded controller) that is used to monitor and control a space experiment has generally been a unique development effort. For each experiment, a specific graphical user interface (GUI) has been developed. This procedure works well for a single-user environment. However, the interface for the International Space Station (ISS) Fluids and Combustion Facility will have to enable scientists throughout the world and astronauts onboard the ISS, using different computer platforms, to interact with their experiments in the Fluids and Combustion Facility. Developing a specific GUI for all these users would be cost prohibitive. An innovative solution to this requirement, developed at Lewis, is to use Internet technology, where the general problem of platform independence has already been partially solved, and to leverage this expanding technology as new products are developed. This approach led to the development of the Embedded Web Technology (EWT) program at Lewis, which has the potential to significantly reduce software development costs for both flight and ground software.

  12. Developing an Integration Infrastructure for Distributed Engine Control Technologies

    Science.gov (United States)

    Culley, Dennis; Zinnecker, Alicia; Aretskin-Hariton, Eliot; Kratz, Jonathan

    2014-01-01

    Turbine engine control technology is poised to make the first revolutionary leap forward since the advent of full authority digital engine control in the mid-1980s. This change aims squarely at overcoming the physical constraints that have historically limited control system hardware on aero-engines to a federated architecture. Distributed control architecture allows complex analog interfaces existing between system elements and the control unit to be replaced by standardized digital interfaces. Embedded processing, enabled by high temperature electronics, provides for digitization of signals at the source and network communications resulting in a modular system at the hardware level. While this scheme simplifies the physical integration of the system, its complexity appears in other ways. In fact, integration now becomes a shared responsibility among suppliers and system integrators. While these are the most obvious changes, there are additional concerns about performance, reliability, and failure modes due to distributed architecture that warrant detailed study. This paper describes the development of a new facility intended to address the many challenges of the underlying technologies of distributed control. The facility is capable of performing both simulation and hardware studies ranging from component to system level complexity. Its modular and hierarchical structure allows the user to focus their interaction on specific areas of interest.

  13. Using a stochastic model and cross-scale analysis to evaluate controls on historical low-severity fire regimes

    Science.gov (United States)

    Maureen C. Kennedy; Donald. McKenzie

    2010-01-01

    Fire-scarred trees provide a deep temporal record of historical fire activity, but identifying the mechanisms therein that controlled landscape fire patterns is not straightforward. We use a spatially correlated metric for fire co-occurrence between pairs of trees (the Sørensen distance variogram), with output from a neutral model for fire history, to infer the...

  14. Assessment of pollution prevention and control technology for plating operations

    Science.gov (United States)

    Chalmer, Paul D.; Sonntag, William A.; Cushnie, George C., Jr.

    1995-01-01

    The National Center for Manufacturing Sciences (NCMS) is sponsoring an on-going project to assess pollution prevention and control technology available to the plating industry and to make this information available to those who can benefit from it. Completed project activities include extensive surveys of the plating industry and vendors of technologies and an indepth literature review. The plating industry survey was performed in cooperation with the National Association of Metal Finishers. The contractor that conducted the surveys and prepared the project products was CAI Engineering. The initial products of the project were made available in April, 1994. These products include an extensive report that presents the results of the surveys and literature review and an electronic database. The project results are useful for all those associated with pollution prevention and control in the plating industry. The results show which treatment, recovery and bath maintenance technologies have been most successful for different plating processes and the costs for purchasing and operating these technologies. The project results also cover trends in chemical substitution, the identification of compliance-problem pollutants, sludge generation rates, off-site sludge recovery and disposal options, and many other pertinent topics.

  15. An Approach to Command and Control Using Emerging Technologies

    Science.gov (United States)

    2013-06-01

    An Approach To Command and Control Using Emerging Technologies ICCRTS – 044 Dan Carpenter Air Force Research Laboratory / RISA ATTN Dan Carpenter... RISA 525 Brookes Rd Rome, NY 13441 (315) 330-7121 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Air Force Research Laboratory / RISA ,525

  16. Advances in Inertial Measurement Technology for Marine Motion Control

    Directory of Open Access Journals (Sweden)

    Mathias Håndlykken

    1996-01-01

    Full Text Available This paper describes the function of an inertial "strap down" attitude sensor based on solid state Coriolis force rate gyros, accelerometers and magnetic sensor. Performance is analyzed taking into account the typical excitations in attitude and linear motion seen in marine applications. The use is for control of fast crafts, ROV and AUV heading, roll, pitch and heave control. The influence on performance given by utilization of external information from velocity log and more accurate heading devices is also analyzed. Typical performance of this low cost type of technology is shown.

  17. Monsanto Mound Laboratory tritium waste control technology development program

    International Nuclear Information System (INIS)

    Bixel, J.C.; Kershner, C.J.; Rhinehammer, T.B.

    1975-01-01

    Over the past four years, implementation of tritium waste control programs has resulted in a 30-fold reduction in the gaseous tritium effluents from Mound Laboratory. However, to reduce tritium waste levels to the ''as low as practicable'' guideline poses problems that are beyond ready solution with state-of-the-art tritium control technology. To meet this advanced technology need, a tritium waste control technology program was initiated. Although the initial thrust of the work under this program was oriented toward development of gaseous effluent treatment systems, its natural evolution has been toward the liquid waste problem. It is thought that, of all the possible approaches to disposal of tritiated liquid wastes, recovery offers the greatest advantages. End products of the recovery processes would be water detritiated to a level below the Radioactivity Concentration Guide (RCG) or detritiated to a level that would permit safe recycle in a closed loop operation and enriched tritium. The detritiated water effluent could be either recycled in a closed loop operation such as in a fuel reprocessing plant or safely released to the biosphere, and the recovered tritium could be recycled for use in fusion reactor studies or other applications

  18. Monsanto/Mound Laboratory tritium waste control technology development program

    International Nuclear Information System (INIS)

    Bixel, J.C.; Kershner, C.J.; Rhinehammer, T.B.

    1975-01-01

    Over the past four years, implementation of tritium waste control programs has resulted in a 30-fold reduction in the gaseous tritium effluents from Mound Laboratory. However, to reduce tritium waste levels to the ''as low as practicable'' guideline poses problems that are beyond ready solution with state-of-the-art tritium control technology. To meet this advanced technology need, a tritium waste control technology program was initiated. Although the initial thrust of the work under this program was oriented toward development of gaseous effluent treatment systems, its natural evolution has been toward the liquid waste problem. We contend that, of all the possible approaches to disposal of tritiated liquid wastes, recovery offers the greatest advantages. End products of the recovery processes would be: (1) water detritiated to a level below the Radioactivity Concentration Guide or detritiated to a level that would permit safe recycle in a closed loop operation and, (2) enriched tritium. The detritiated water effluent could be either recycled in a closed loop operation such as in a fuel reprocessing plant or safely released to the biosphere, and the recovered tritium could be recycled for use in fusion reactor studies or other applications

  19. Environmental products from EPRI`s Environmental Control Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Andes, G.M.; Maybach, G.B. [Electric Power Research Inst., Barker, NY (United States). Environmental Control Technology Center

    1994-12-31

    Since 1987, developments from the research at EPRI`s Environmental Control Technology Center (ECTC) have been applied to coal-fired utility power plants to maximize emissions control systems, decrease capital and operating costs, and increase system reliability. The ECTC has made several significant advancements in both wet and dry FGD technologies over the years and is currently being utilized to investigate many future environmental issues, such as the measurement and control of toxic compounds and SOx/NOx emissions. This paper discusses the equipment capabilities of the ECTC, the scope of ongoing research, and the industry benefits resulting from the EPRI products generated from the Center. Two specific case studies of environmental products from the Center are profiled to describe the development of products at the ECTC, and the transition of research products to commercial prototypes. One such product, the On-Line Chemistry Monitor, allows for real-time monitoring of critical FGD chemistry parameters, while the other, the Automatic Limestone Grind Control system, provides for precise control of reagent grind to maximize performance, cost, and utilization.

  20. Control of coupled oscillator networks with application to microgrid technologies

    Science.gov (United States)

    Skardal, Per Sebastian; Arenas, Alex

    2015-01-01

    The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions—a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable synchronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself. PMID:26601231

  1. Control of coupled oscillator networks with application to microgrid technologies

    Science.gov (United States)

    Arenas, Alex

    The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions-a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable syn- chronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself.

  2. Research on control technology of hardware parallelism for marine controlled source electromagnetic transmitter

    Science.gov (United States)

    Wang, Meng; Deng, Ming; Luo, Xianhu; Zhao, Qingxian; Chen, Kai; Jing, Jianen

    2018-02-01

    The marine controlled source electromagnetic (CSEM) method has been recognized as an effective exploration method of shallow hydrocarbons around the world. We developed our own underwater marine CSEM transmitter that consisted of many functional modules with various response times. We previously adopted a centralized software-control technology to design the transmitter circuit topological structure. That structure probably generated a control disorder or malfunction. These undesirable conditions could lead to repeated recovery and deployment of the transmitter, which not only consumed time but also affected data continuity and establishment of stable and continuous CSEM field. We developed an instrument design concept named ‘control technology of hardware parallelism’. In this design, a noteworthy innovation of our new technology is to solve the above-mentioned problems at the physical and fundamental levels. We used several self-contained control-units to simultaneously accomplish the predetermined functions of the transmitter. The new solution relies on two technologies: multi-core embedded technology and multi-channel parallel optical-fiber data transmission technology. The first technology depends on many independent microcontrollers. Every microcontroller is only used to achieve a customized function. The second one relies on several multiple optical-fiber transmission channels realized by a complex programmable logic device and two optical-fiber conversion devices, which are used to establish a communication link between the shipboard monitoring and control-unit and underwater transmitter. We have conducted some marine experiments to verify the reliability and stability of the new method. In particular, the new technology used in the transmitter system could help us obtain more useful measured data in a limited time, improve real-time efficiency, and support the establishment of a stable CSEM field.

  3. The effect of sainfoin (Onobrychis viciifolia) and carob pods (Ceratonia siliqua) feeding regimes on the control of lamb coccidiosis.

    Science.gov (United States)

    Saratsis, A; Voutzourakis, N; Theodosiou, T; Stefanakis, A; Sotiraki, S

    2016-06-01

    Recent research has suggested that plants containing condensed tannins may offer a promising alternative approach for the control of coccidiosis in lambs and goat kids. The present study aimed to examine the potential effect of condensed tannins in sainfoin (Onobrychis viciifolia) and carob pods (Ceratonia siliqua) incorporated in sheep rations against lamb coccidiosis. The above tannin-rich sources were studied in three independent feeding trials in which the animals (naturally infected by Eimeria spp. ewes and their lambs) were allocated (i) in the control group and received a tannin-free diet (lucerne hay), or (ii) in the treatment groups and received a tannin-rich diet based on sainfoin hay (in trials 1 and 2), or in carob pod meal and a combination of carob pod meal and sainfoin hay (in trial 3). In total, 95 newborn lambs (and their 73 ewes) were enrolled in all trials which started a month before lambing and ended 8-10 weeks after lambs were born (at weaning). The course of coccidial infection was monitored in lambs by faecal oocyst counts and consistencies which were recorded at weekly intervals. Moreover, lambs total weight gain was evaluated at the end of each trial. During all trials, 100 % of the animals got naturally infected by Eimeria species and the infection burden was higher in trials 2 and 3 compared to trial 1 but in all cases, severe signs of diarrhoea were not observed. Tannin-rich diets were well accepted by the animals not affecting their feed intake and body weight gain when compared to the controls. The results suggest that incorporation of both tannin-rich resources (especially sainfoin) in sheep rations can reduce Eimeria oocyst excretion rates by the lambs, which can decrease subsequently the contamination of the farm environment with the parasite. However, the high variability noted on the results is not allowing us to draw any definite conclusions at least until the potential of those plants is further investigated.

  4. Preventing unauthorized use of firearms by implementing use control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, D.R.

    1995-07-01

    A goal among many law enforcement and security professionals, and the National Institute of Justice, is to decrease the risk that an officer or security guard may encounter. One risk that officers confront is unpredictable persons who sometimes try to gain control of the officer`s firearm. The addition of user-recognizing-and-authorizing technologies to a firearm could eliminate the capability of an unauthorized user from firing an officer`s firearm. Sandia National Laboratories has been active in the research and development of nuclear security systems that include access and use control technologies. Sandia is being sponsored by the National Institute of Justice to perform a research and development project to determine the feasibility of a user authorized firearm, or {open_quotes}smart gun.{close_quotes} The focus group for the research is law enforcement officers because of the number of firearm take aways that have occurred in the past and the severe use requirements placed on their firearms. A comprehensive look at the problem of weapon take aways in the United States was conducted using information available from the Federal Bureau of Investigation and other law enforcement sources. An investigation into the end user requirements for smart gun technologies has been completed. During the remainder of the project, the user requirements are being transformed into engineering requirements. which will then be used to evaluate numerous technologies that could be used in a smart gun. Demonstration models will be made of the most promising technologies. Other potential applications are remote enabling and disabling of firearms, transportation of prisoners by corrections officers, military use in operations other than war, and use by private citizens.

  5. Development of partial nitrification as a first step of nitrite shunt process in a Sequential Batch Reactor (SBR) using Ammonium Oxidizing Bacteria (AOB) controlled by mixing regime.

    Science.gov (United States)

    Soliman, Moomen; Eldyasti, Ahmed

    2016-12-01

    Shortcut biological nitrogen removal is a non-conventional way of removing nitrogen from wastewater using two processes either nitrite shunt or deammonification. In the nitrite shunt process, the ammonia oxidation step stops at the nitrite stage, which is known as partial nitrification, then nitrite is directly reduced to nitrogen gas. Effective partial nitrification could be achieved by accumulating Ammonia Oxidizing Bacteria (AOB) and inhibiting Nitrite Oxidizing Bacteria (NOB). In this research, a novel control strategy has been developed to control the DO using the variable mixing regime in a suspended growth system using a Sequential Batch Reactor (SBR) in order to achieve a stable ammonia removal efficiency (ARE) and nitrite accumulation rate (NAR) at a high nitrogen loading rate (NLR). The new controlled SBR system has been successfully running at NLR up to 1.2kg/(m 3 .day) and achieved an ARE of 98.6±2.8% and NAR of 93.0±0.7%. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Maintaining quality control in a nontraditional nuclear technology degree program

    International Nuclear Information System (INIS)

    DeSain, G.W.

    1989-01-01

    Regents College, created by the Board of Regents of the University of The State on New York in 1971, has been offering, since January 1985, AS and BS degrees in nuclear technology. The impetus for establishing the nuclear technology degrees came from nuclear utility management and had to do with the US Nuclear Regulatory Commission proposed rule regarding degreed operators on shift. There are a variety of ways to earn credits in Regents College degree programs: (1) college courses taken for degree-level credit from regionally accredited colleges; (2) courses sponsored by business, industry, or government that have been evaluated and recommended for credit by the New York National or American Council on Education (ACE's) Program on Noncollegiate Sponsored Instruction (PONSI); (3) military education that has been evaluated by ACE PONSI; (4) approved college-proficiency examinations; and (5) special assessment: an individualized examination of college-level knowledge gained from experience or independent study. Nuclear technology students primarily use college course work, evaluated military education, and proficiency examinations to complete degree programs. However, an increasing number of utilities are having training programs PONSI evaluated, resulting in an increased use of these courses in the nuclear technology degrees. Quality control is a function of several factors described in the paper

  7. Applications of CELSS technology to controlled environment agriculture

    Science.gov (United States)

    Bates, Maynard E.; Bubenheim, David L.

    1991-01-01

    Controlled environment agriculture (CEA) is defined as the use of environmental manipulation for the commercial production of organisms, whether plants or animals. While many of the technologies necessary for aquaculture systems in North America is nevertheless doubling approximately every five years. Economic, cultural, and environmental pressures all favor CEA over field production for many non-commodity agricultural crops. Many countries around the world are already dependent on CEA for much of their fresh food. Controlled ecological life support systems (CELSS), under development at ARC, KSC, and JSC expand the concept of CEA to the extent that all human requirements for food, oxygen, and water will be provided regenerated by processing of waste streams to supply plant inputs. The CELSS will likely contain plants, humans, possibly other animals, microorganisms and physically and chemical processors. In effect, NASA will create engineered ecosystems. In the process of developing the technology for CELSS, NASA will develop information and technology which will be applied to improving the efficiency, reliability, and cost effectiveness for CEA, improving its resources recycling capabilities, and lessening its environmental impact to negligible levels.

  8. Assessment of environmental control technology for coal conversion aqueous wastes

    Energy Technology Data Exchange (ETDEWEB)

    Klein, J.A.; Barker, R.E.

    1978-07-01

    A hydrocarbonization process has been studied to assess environmental control technology for coal conversion wastewaters. Fifteen major wastewater streams were identified; 2 present serious environmental problems not routinely encountered in industry. These are the hydrocarbonization condensate and the ash sluicing waste from the gasifier. The hydrocarbonization product water is high in phenolics, ammonia, cyanide, thiocyanate, and other sulfur compounds. This stream will present a significant wastewater treatment problem unless the stream can be recycled internally. The gasifier-ash sluicing water will probably be similar to ash sluicing water from coal-fired power generating plants. However, the large quantity of toxic trace elements may be more easily dissolved from ash produced at the lower-temperature and reducing conditions encountered in gasification. A number of cleanup technologies relevant to the cleanup of coal conversion aqueous effluents have ben assessed for their adaptability to the specific pollutants found in coal hydrocarbonization wastewater. A summary of these processes lists the potential applicability, economics, raw material requirements, process compatibility, operating conditions, state of development, environmental problems, energy requirements, and availability of each. Indications are that almost any level of removal can be achieved if one is willing to pay the cost. The optimum amount of cleanup will require much future interaction between industry, environmental control technology developers, human and environmental effects assessors, and federal effluent regulations administrators.

  9. Environmentally Friendly Coating Technology for Autonomous Corrosion Control

    Science.gov (United States)

    Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Johnsey, Marissa N.; Jolley, Scott T.; Pearman, Benjamin P.; Zhang, Xuejun; Fitzpatrick, Lilliana; Gillis, Mathew; Blanton, Michael; hide

    2016-01-01

    This work concerns the development of environmentally friendly encapsulation technology, specifically designed to incorporate corrosion indicators, inhibitors, and self-healing agents into a coating, in such a way that the delivery of the indicators and inhibitors is triggered by the corrosion process, and the delivery of self-healing agents is triggered by mechanical damage to the coating. Encapsulation of the active corrosion control ingredients allows the incorporation of desired autonomous corrosion control functions such as: early corrosion detection, hidden corrosion detection, corrosion inhibition, and self-healing of mechanical damage into a coating. The technology offers the versatility needed to include one or several corrosion control functions into the same coating.The development of the encapsulation technology has progressed from the initial proof-of-concept work, in which a corrosion indicator was encapsulated into an oil-core (hydrophobic) microcapsule and shown to be delivered autonomously, under simulated corrosion conditions, to a sophisticated portfolio of micro carriers (organic, inorganic, and hybrid) that can be used to deliver a wide range of active corrosion ingredients at a rate that can be adjusted to offer immediate as well as long-term corrosion control. The micro carriers have been incorporated into different coating formulas to test and optimize the autonomous corrosion detection, inhibition, and self-healing functions of the coatings. This paper provides an overview of progress made to date and highlights recent technical developments, such as improved corrosion detection sensitivity, inhibitor test results in various types of coatings, and highly effective self-healing coatings based on green chemistry.

  10. Reviewing the impact of advanced control room technology

    International Nuclear Information System (INIS)

    Wilhelmsen, C.A.; Gertman, D.I.; Ostrom, L.T.; Nelson, W.R.; Galyean, W.J.; Byers, J.C.

    1992-01-01

    Progress to date on assessing the nature of the expected changes in human performance and risk associated with the introduction of digital control, instrumentation, and display systems is presented. Expected changes include the shift toward more supervisory tasks, development of intervention strategies, and reallocation of function between human and machine. Results are reported in terms of the scope of new technology, human performance issues, and crews experience with digital control systems in a variety of industries petrochemical and aerospace. Plans to conduct a limited Probabilistic Risk Assessment/Human Reliability Assessment (PRA/HRA) comparison between a conventional NUREG-1150 series plant and that same plant retrofit with distributed control and advanced instrumentation and display are also presented. Changes needed to supplement existing HRA modeling methods and quantification techniques are discussed

  11. On Social and Material Aspects of Technological Control

    Science.gov (United States)

    Herfel, William E.

    This commentary on Hugh Lacey's paper emphasises the material aspects of the social structure within which technological control takes place. It is suggested here that when the example of the Green Revolution is examined in detail a clear-cut distinction between material and social constraints/possibilities is misleading. I propose a material analysis of the control situation. This analysis is placed within the material framework of the social structure within which the control system is employed. By widening of the analysis even further it is hoped that the environmental issues of the Green Revolution that concern Vandana Shiva can be addressed. I provide a glimpse of how such an account should proceed.

  12. Control system by the technological electron Linac KUT-20

    CERN Document Server

    Akchurin, Y I; Gurin, V A; Demidov, N V

    2001-01-01

    The high-power technological electron linac KUT-20 was developed at the Science Research Complex 'Accelerator' of NSC KIPT. The linac consists of two 1.2 m length accelerating structures with a variable geometry and an injector. The latter comprises a diode electron gun,a klystron type buncher and an accelerating cavity.With a RF supply power at accelerating structure entries of 11 MW and with a current at the accelerator exit of 1A,the beam energy will be up to 20 MeV.An average beam power is planned to be 20 kW.All systems of the accelerator are controlled by a computerised control system. The program and technical complex consist of PC equipped with fast ADC control console, synchronization unit, microprocessor-operated complexes.

  13. Instrumentation and Control Technologies for Refueling the AHTR

    International Nuclear Information System (INIS)

    Holcomb, David Eugene; Varma, Venugopal Koikal

    2012-01-01

    The process and mechanisms for refueling the Advanced High-Temperature Reactor (AHTR) are currently undergoing preconceptual design. The instrumentation and controls (I and C) required for the fuel transfer are simultaneously under design as part of this process. Overall, the AHTR's refueling system will consist of a fully automated, optically guided mechanical transfer system with operator intervention only required for exception handling. The refueling system design remains too immature to enable selection of particular instrumentation components. This paper provides an overview of the refueling process for the AHTR, the I and C requirements for the refueling, the current I and C design and technology status, and the envisioned process for developing and validating the required technology.

  14. Systems analysis for materials control and accountancy technology

    International Nuclear Information System (INIS)

    Daly, T.A.; Bucher, R.G.; Rothman, A.B.; Charak, I.; Persiani, P.J.

    1987-01-01

    The objective is to upgrade Materials Control and Accountancy (MCandA) technology over the flows of special nuclear materials throughout the DOE complex of fuel cycles. The program focus is to develop a ''Management Tool'' for decision support in evaluating MCandA upgrades, and invalidating the MCandA aspects of the Master Safeguards and Security Agreements (MSSA) effectiveness. The approach is the computerization of the nuclear materials flow charts, identification of key measurement locations in the production and product fuel cycle, and construct data information processing at each measurement location. The program is to provide the Office of Safeguards and Security (OSS) with a timely management decision support system in planning MCandA safeguards technology upgrades over the nuclear materials production and product cycles

  15. Application of nonlocal plasma technology for controlling plasma conductivity

    Science.gov (United States)

    Yuan, Chengxun; Demidov, V. I.; Kudryavtsev, A. A.; Kurlyandskaya, I. P.; Rudakova, T. V.; Zhou, Z. X.

    2017-10-01

    A promising approach for better control of the plasma parameters involves the exploitation of peculiarities of plasmas with a nonlocal electron energy distribution. Nonlocal plasma technology (NLP-technology) is based on the effect of energetic electrons in the plasma volume. In this work, an experimental study of influence of the chemo-ionization processes on non-stationary plasma conductivity has been conducted. Due to energetic, supra-thermal electrons, which appear in the chemo-ionization reactions, the highly non-equilibrium and time dependent nonlocal electron energy distribution function is formed. In such a plasma thermal electrons always have positive conductivity (mobility), while supra-thermal, energetic electrons may have negative conductivity in heavy (argon, krypton and xenon) noble gases dependently on conditions. Experiments demonstrate that this effect may lead to the non-monotonic temporal behavior of plasma conductivity and may potentially create the negative electron mobility.

  16. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Durkee, Jr., Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  17. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Argonne National Lab. (ANL), Argonne, IL (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Mike [Argonne National Lab. (ANL), Argonne, IL (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  18. Intelligent control and automation technology for nuclear application

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Hee; Eom, Heung Sub; Kim, Ko Ryu; Lee, Jae Cheol; Choi, You Rak; Lee, Soo Cheol [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-06-01

    Using recent technologies on a mobile robot and computer science, we developed an automatic inspection system for weld lines of the reactor pressure vessel. The ultrasonic inspection of the reactor pressure vessel is currently performed by commercialized robot manipulators. Since, however, the conventional fixed type robot manipulator is very huge, heavy and expensive, it needs long inspection time and is hard to handle and maintain. In order to resolve these problems, we developed a new inspection automation system using a small mobile robot crawling on the vertical wall. According to the conceptual design studied in the first year, we developed the inspection automation system including an underwater inspection robot, a laser position control subsystem and a main control subsystem. And we carried out underwater experiments on the reactor vessel mockup. After finishing this project successfully, we have a plan to commercialize our inspection system. Using this system, we can expect much reduction of the inspection time, performance enhancement, automatic management of inspection history, etc. In the economic point of view, we can also expect import substitution more than 5 million dollars. The established essential technologies for intelligent control and automation are expected to be synthetically applied to the automation of similar systems in nuclear power plants. 4 tabs., 37 figs., 6 refs. (Author).

  19. Analysis of the environmental control technology for oil shale development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Eckhoff, D.; Swanson, S.; Glenne, B.; Wagner, F.

    1978-02-01

    The environmental control technology proposed in the various oil shale projects which are under development are examined. The technologies for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the processed shale were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. There are no published national standards against which to judge the stabilization and vegetation of the processed shale. However, based on the goal of producing an environmentally and aesthetically acceptable finished processed shale pile, it seems probable that this can be accomplished. It is concluded that the environmental control technology is available to meet all current legal requirements. This was not the case before Colorado changed their applicable Air Pollution regulations in August of 1977; the previous ones for the oil shale region were sufficiently stringent to have caused a problem for the current stage of oil shale development. Similarly, the federal air-quality, non-deterioration regulations could be interpreted in the future in ways which would be difficult for the oil shale industry to comply with. The Utah water-quality, non-deterioration regulations could also be a problem. Thus, the only specific regulations which may be a problem are the non-deterioration parts of air and water quality regulations. The unresolved areas of environmental concern with oil shale processing are mostly for the problems not covered by existing environmental law, e.g., trace metals, polynuclear organics, ground water-quality changes, etc. These may be problems, but no evidence is yet available that these problems will prevent the successful commercialization of oil shale production.

  20. Social marketing: a behavior change technology for infection control.

    Science.gov (United States)

    Mah, Manuel W; Deshpande, Sameer; Rothschild, Michael L

    2006-09-01

    Changing health care worker behaviors is a core function of infection control programs. The social change technologies of education and institutional policy are limited in their capacity to achieve desired behaviors on a sustained basis because they do not address the importance of opportunity and ability in practice enhancement. Social marketing addresses the health care worker's lack of opportunity and ability by offering a bundle of benefits at low cost with high accessibility and by doing this better than the behavioral status quo. This article introduces some social marketing concepts and explicates them in the context of hand hygiene promotion.

  1. New technologies for a postaccident control room habitability assessment

    International Nuclear Information System (INIS)

    Lahti, G.P.; Perchiazzi, W.T.

    1993-01-01

    Older nuclear power plants typically considered only a nominal amount of unfiltered in-leakage (typically 10 ft 3 /min) affecting their postaccident habitability. However, recent measurements of unfiltered in-leakage show leakages in excess of the nominal 10 ft 3 /m in. The assessment of postaccident doses in control rooms is done in a number of well-defined steps: (1) Determine the initial release of radioactivity to the containment (the open-quotes source termclose quotes). (2) Determine the release of radioactivity to the environment. (3) Determine the atmospheric dispersion and the concentration at the control room air intake. (4) Determine within-building dilution (if any). (5) Determine unfiltered in-leakage. (6) Determine the concentration of radioactivity in the control room. (7) Determine the dose to control room occupants. The prescriptive methodology of the Murphy-Campe paper and Standard Review Plan (SRP) 6.4 has been used by the U.S. Nuclear Regulatory Commission (NRC) to assess control room designs. However, a number of new technologies have been employed to reevaluate an existing pressurized water reactor plant design

  2. System analysis for material control and accountancy technology

    International Nuclear Information System (INIS)

    Persiani, P.J.; Daly, T.A.; Bucher, R.G.; Rothman, A.B.; Cha, B.C.; Trevorrow, L.E.; Seefeldt, W.B.

    1987-01-01

    The systems analysis for material control and accountancy technology (SAMCAT) program involves a working group structured to ensure that direct operating measurements, accountancy experience, and knowledge of the processes and flows of nuclear material in the total US Department of Energy (DOE) complex of production fuel cycles would be the major bases for developing and implementing a plan of action. This working group consists of facility operators, DOE Office of Safeguards Security headquarters and field offices, and government laboratories. The program focus is to develop a system for decision support in validating the material control and accountancy (MC ampersand A) aspects of the masters safeguards and security agreements effectiveness and in evaluating proposed MC ampersand A upgrades. This paper is a status report on the current capabilities of the system

  3. Experience with ISO quality control in assisted reproductive technology.

    Science.gov (United States)

    Alper, Michael M

    2013-12-01

    Assisted reproductive technology (ART) programs are complex organizations requiring the integration of multiple disciplines. ISO 9001:2008 is a quality management system that is readily adaptable to an ART program. The value that ISO brings to the entire organization includes control of documents, clear delineation of responsibilities of staff members, documentation of the numerous processes and procedures, improvement in tracking and reducing errors, and overall better control of systems. A quality ART program sets quality objectives and monitors their progress. ISO provides a sense of transparency within the organization and clearer understanding of how service is provided to patients. Most importantly, ISO provides the framework to allow for continual improvement. Copyright © 2013 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  4. New radiation technologies and methods for control of technological processes in metallurgy

    International Nuclear Information System (INIS)

    Zaykin, Yu.

    1996-01-01

    effect that the long-time aging of deformed samples at high temperatures. The observed effect of elastic module temperature stabilization under electron irradiation is especially important for elastic devices service properties improvement. Non-Traditional Internal Friction Method Applications for the Control of the Structure-Phase State and Defects in Metals and Alloys Modern macroscopic theory of internal friction is developed as the base of experiment and technology control methods and experimental data analysis. The principals of internal friction data spectroscopic analysis are elaborated. New physical information is obtained on special distribution, diffusion and vibration spectra of impurities and defects in irradiated metals and alloys. It is shown that electron irradiation can be used to influence upon atom vibration spectra

  5. Best available technology equivalent controls for B Plant Process Condensate: Tank farm process technology section

    International Nuclear Information System (INIS)

    1988-11-01

    This report evaluates whether proposed controls for the B Plant Process Condensate effluent stream are equivalent to Best Available Technology (BAT) economically achievable. Methods to determine whether the proposed controls for the BCP were equivalent to BAT originated from the Guidance Document for the Hanford Site. The BAT performance standards, which originate from the Clean Water Act, are to be applied to all contaminated liquid effluent discharges currently going to the soil column at the Hanford Site. The B Plant BAT evaluation addressed pollutants that had not been regulated traditionally under Federal or State water-pollution control programs. As a result, only comparisons could be made to existing radiation and water quality standards, and a BAT determination based on the effluent guidelines method (as outlined in the BAT Guidance Document) was not possible. Due to the variability and inconsistency of factors with comparable streams, such as the effluent stream at the Savannah River Plant, a BAT determination by the technology transfer method and treatability studies method was not possible. By using the generic treatment systems method, a one-or two-stage treatment system for dissolved solids removal was concluded to be equivalent to BAT. By performing two economic achievability tests, a one-stage treatment system consisting of mixed bed ion exchange columns was considered to be cost effective and equivalent to BAT. 13 refs., 4 figs., 5 tabs

  6. Analysis of the environmental control technology for tar sand development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Glenne, B.; Bryner, C.

    1979-06-01

    The environmental technology for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the waste tar sand were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. Currently there are two large-scale plants producing liquid fuels from tar sands in Alberta, Canada which use similar technology involving surface mining, hot water extraction, and surface disposal of waste sand. These projects all meet the Canadian environmental control regulations in force at the time they began. The largest US deposits of tar sands are much smaller than the Canadian; 95 percent are located in the state of Utah. Their economics do not appear as attractive as the Canadian deposits. The environmental control costs are not large enough to make an otherwise economic project uneconomic. The most serious environmental conflict likely to occur over the recovery of liquid fuels from the US deposits of tar sands is that caused by the proximity of the deposits to national parks, national monuments, and a national recreation area in Utah. These areas have very stringent air pollution requirements; and even if the air pollution control requirements can be met, there may still be adequate opposition to large-scale mining ventures in these areas to prevent their commercial exploitation. Another environmental constraint may be water rights availability.Essentially all of the water running in the Colorado river basin is now legally allocated. Barring new interpretations of the legality of water rights purchase, Utah tar sands developments should be able to obtain water by purchasing existing irrigation water rights.

  7. Development of aromatic VOC control technology by electron beam hybrid

    International Nuclear Information System (INIS)

    Kim, Jo-Chun; Kim, Ki-Joon

    2006-01-01

    As a fundamental study, the decomposition of volatile organic compounds (VOCs) using electron beam (EB) irradiation has been extensively investigated. EB treatments of VOCs such as toluene and styrene are discussed. The degradation characteristics were intensively investigated under various concentrations and irradiation doses to determine and improve VOC removal efficiencies. This work illustrates that the removal efficiencies of aromatic VOCs generally increase as their concentrations decrease and the irradiation doses increase. Based on these basic studies, it was found that by-products produced from EB irradiation of VOCs would cause a secondary pollution problem. Therefore, a novel hybrid technology has been applied to control aromatic VOC emissions by annexing the catalyst technique with conventional treatment study using EB technology. The experiments were carried out using a bench-scale at first, then a pilot-scale system was followed. Toluene was selected as a typical VOC for EB hybrid control to investigate by-products, effects of ceramic and catalyst, and factors affecting overall efficiency of degradation. It was concluded that VOCs could be destroyed more effectively by a novel hybrid system than single EB irradiation. (author)

  8. New Technology and Changing Organisational Forms: Implications for Managerial Control and Skills.

    Science.gov (United States)

    Grimshaw, Damian; Cooke, Fang-Lee; Grugulis, Irena; Vincent, Steve

    2002-01-01

    Case studies of client relations in a call center and an information technology company's partnership with a government agency examined how new technology affects organizational structures and managerial control. Evidence suggests that new structures arise in tandem with technological changes and technology's use as a form of control differs in…

  9. State of the art survey of technologies applicable to NASA's aeronautics, avionics and controls program

    Science.gov (United States)

    Smyth, R. K. (Editor)

    1979-01-01

    The state of the art survey (SOAS) covers six technology areas including flightpath management, aircraft control system, crew station technology, interface & integration technology, military technology, and fundamental technology. The SOAS included contributions from over 70 individuals in industry, government, and the universities.

  10. Interoperability for Space Mission Monitor and Control: Applying Technologies from Manufacturing Automation and Process Control Industries

    Science.gov (United States)

    Jones, Michael K.

    1998-01-01

    Various issues associated with interoperability for space mission monitor and control are presented in viewgraph form. Specific topics include: 1) Space Project Mission Operations Control Architecture (SuperMOCA) goals and methods for achieving them; 2) Specifics on the architecture: open standards ad layering, enhancing interoperability, and promoting commercialization; 3) An advertisement; 4) Status of the task - government/industry cooperation and architecture and technology demonstrations; and 5) Key features of messaging services and virtual devices.

  11. Performance of active vibration control technology: the ACTEX flight experiments

    Science.gov (United States)

    Nye, T. W.; Manning, R. A.; Qassim, K.

    1999-12-01

    This paper discusses the development and results of two intelligent structures space-flight experiments, each of which could affect architecture designs of future spacecraft. The first, the advanced controls technology experiment I (ACTEX I), is a variable stiffness tripod structure riding as a secondary payload on a classified spacecraft. It has been operating well past its expected life since becoming operational in 1996. Over 60 on-orbit experiments have been run on the ACTEX I flight experiment. These experiments form the basis for in-space controller design problems and for concluding lifetime/reliability data on the active control components. Transfer functions taken during the life of ACTEX I have shown consistent predictability and stability in structural behavior, including consistency with those measurements taken on the ground prior to a three year storage period and the launch event. ACTEX I can change its modal characteristics by employing its dynamic change mechanism that varies preloads in portions of its structure. Active control experiments have demonstrated maximum vibration reductions of 29 dB and 16 dB in the first two variable modes of the system, while operating over a remarkable on-orbit temperature range of -80 °C to 129 °C. The second experiment, ACTEX II, was successfully designed, ground-tested, and integrated on an experimental Department of Defense satellite prior to its loss during a launch vehicle failure in 1995. ACTEX II also had variable modal behavior by virtue of a two-axis gimbal and added challenges of structural flexibility by being a large deployable appendage. Although the loss of ACTEX II did not provide space environment experience, ground testing resulted in space qualifying the hardware and demonstrated 21 dB, 14 dB, and 8 dB reductions in amplitude of the first three primary structural modes. ACTEX II could use either active and/or passive techniques to affect vibration suppression. Both experiments trailblazed

  12. Sustainable urban regime adjustments

    DEFF Research Database (Denmark)

    Quitzau, Maj-Britt; Jensen, Jens Stissing; Elle, Morten

    2013-01-01

    The endogenous agency that urban governments increasingly portray by making conscious and planned efforts to adjust the regimes they operate within is currently not well captured in transition studies. There is a need to acknowledge the ambiguity of regime enactment at the urban scale. This direc...

  13. Small Business Tax Regimes

    OpenAIRE

    Yilmaz, Fatih; Coolidge, Jacqueline

    2016-01-01

    Simplified tax regimes for micro and small enterprises in developing countries are intended to facilitate voluntary tax compliance. However, survey evidence suggests that small business taxation based on simplified bookkeeping or turnover is sometimes perceived as too complex for microenterprises in countries with high illiteracy levels. Very simple fixed tax regimes not requiring any book...

  14. Flux scaling: Ultimate regime

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Flux scaling: Ultimate regime. With the Nusselt number and the mixing length scales, we get the Nusselt number and Reynolds number (w'd/ν) scalings: and or. and. scaling expected to occur at extremely high Ra Rayleigh-Benard convection. Get the ultimate regime ...

  15. Basic Aspects of Deep Soil Mixing Technology Control

    Science.gov (United States)

    Egorova, Alexandra A.; Rybak, Jarosław; Stefaniuk, Damian; Zajączkowski, Przemysław

    2017-10-01

    Improving a soil is a process of increasing its physical/mechanical properties without changing its natural structure. Improvement of soil subbase is reached by means of the knitted materials, or other methods when strong connection between soil particles is established. The method of DSM (Deep Soil Mixing) columns has been invented in Japan in 1970s. The main reason of designing cement-soil columns is to improve properties of local soils (such as strength and stiffness) by mixing them with various cementing materials. Cement and calcium are the most commonly used binders. However new research undertaken worldwide proves that apart from these materials, also gypsum or fly ashes can also be successfully implemented. As the Deep Soil Mixing is still being under development, anticipating mechanical properties of columns in particular soils and the usage of cementing materials in formed columns is very difficult and often inappropriate to predict. That is why a research is carried out in order to find out what binders and mixing technology should be used. The paper presents several remarks on the testing procedures related to quality and capacity control of Deep Soil Mixing columns. Soil improvement methods, their advantages and limitations are briefly described. The authors analyse the suitability of selected testing methods on subsequent stages of design and execution of special foundations works. Chosen examples from engineering practice form the basis for recommendations for the control procedures. Presented case studies concerning testing the on capacity field samples and laboratory procedures on various categories of soil-cement samples were picked from R&D and consulting works offered by Wroclaw University of Science and Technology. Special emphasis is paid to climate conditions which may affect the availability of performing and controlling of DSM techniques in polar zones, with a special regard to sample curing.

  16. A comparison of LIDT behavior of metal-dielectric mirrors in ns and ps pulse regime at 1030 nm with regard to the coating technology

    Science.gov (United States)

    Škoda, Václav; Vanda, Jan; Uxa, Štěpán

    2017-11-01

    Several sets of mirror samples with multilayer system Ta2O5/SiO2 on silver metal layer were manufactured using either PVD or IAD coating technology. Both BK7 and fused silica substrates were used for preparation of samples. Laserinduced- damage-threshold (LIDT) of metal-dielectric mirrors was tested using a laser apparatus working at 1030 nm wavelength, in ns and ps pulse length domains in S-on-1 test mode. The measured damage threshold values at 45 deg angle of incidence and P-polarization were compared for different pulse length, substrate materials and coating technology.

  17. NPP process systems testing by means of CSS 'VEB' on the example of operating regimes verification of the make-up and boron control system

    International Nuclear Information System (INIS)

    Obraztsov, Evgenii; Gavrilov, Maxim; Tretyakov, Evgeny; Bezlepkin, Vladimir

    2017-01-01

    Over the last decade we have been gradually developing a specific set of connected software tools and calculation codes that allow us to simulate I and C systems, thermal-hydraulic, neutron-physical and electrical processes in elements and systems at the Unit of NPP (initially with VVER (pressurized water reactor)). In 2012 we called it a complex simulation suite 'Virtual Unit of NPP' (or CSS 'VEB' for short). It contains a combination of thermal hydraulic codes: the best-estimate (two-liquid) calculation codes KORSAR and CORTES and a homogenous calculation code TPP. So to analyze a specific process system one can build thermal-hydraulic simulation models with different levels of details up to a nodalization scheme with real geometry. And the result at some points is similar to the notion of an 'engineering/testing simulator'. To test regimes for a system one can combine a thermal hydraulic scheme with I and C simulations. Make-up and boron control system (KBA) is a system important to NPP safety. It was developed to function in the case of anticipated operational occurrences, as well as to operate under normal operation conditions. For example, the KBA system shall ensure the following functions: keeping the primary coolant material balance under all operation conditions; reactor reactivity control by means of change of boron acid concentration in the primary coolant under normal operation conditions. So the paper is dedicated to the testing (combined with I and C systems) methodology and its results for the KBA system testing by means of CSS 'VEB'. (author)

  18. Mudanças em regimes industriais e acumulação de capacidades tecnológicas: evidências de empresas de celulose e papel no Brasil Changes in industrial regimes and accumulation of technological capabilities: evidence from pulp and paper firms in Brazil

    Directory of Open Access Journals (Sweden)

    Claudia Teresa Carvajal García

    2009-12-01

    Full Text Available A despeito da profusão de estudos sobre capacidade tecnológica em nível de empresas ao longo dos últimos 30 anos, há escassez de estudos sobre similaridades e diferenças entre empresas do mesmo setor industrial, em termos de acumulação de capacidades tecnológicas e suas implicações para o aprimoramento de indicadores de performance técnico-econômica ao longo de diferentes regimes industriais, especialmente no contexto de países de industrialização recente, como é o caso do Brasil. Baseando-se em evidências de primeira mão colhidas à base de extensivos trabalhos de campo, este artigo examina essas questões em três grandes empresas de celulose e papel no Brasil (1970-2004. O estudo encontrou: (1 Diferenças inter e intraempresariais em termos da maneira e velocidade de acumulação de capacidades para funções tecnológicas específicas ao longo dos diferentes períodos; (2 Tais diferenças refletiram-se, com diferentes graus de intensidade, no aprimoramento dos indicadores de performance técnico-econômica; (3 As empresas responderam positivamente às mudanças para uma economia aberta partir dos anos 1990; (4 Porém, os aprimoramentos em seus indicadores de performance técnico-econômica não derivaram das mudanças do regime industrial per se, mas, principalmente, dos seus esforços internos para acumulação tecnológica.Despite the profusion of studies of firm-level technological capabilities studies, over the past 30 years, there is a scarcity of analyses on similarities and differences across firms, of the same industrial sector, in terms of types and levels, direction and rate of accumulation of technological capabilities and their implications for the improvement of techno-economic performance across different industrial regimes, especially in the context of late-industrializing countries, as it is the case of Brazil. Based on first-hand qualitative and quantitative empirical evidence, collected on the basis of

  19. Control of environmental impact with modern chemical technology

    Science.gov (United States)

    Hocking, Martin B.

    1986-03-01

    Here are assembled representative excerpts from a new text in applied chemistry. They illustrate the well-referenced treatment of industrial processes that are here considered with their related emission control problems and solutions. A brief account of general aspects of the industry is followed by surveys of the significance and technical aspects of air and water pollution chemistry. Consideration is given to emission avoidance or containment, waste treatment, and waste disposal options as they relate to both of these environmental areas. Details of salt recovery and the products of brine electrolysis plus environmental aspects of these operations are treated as examples of some of the processes discussed. Also covered are fertilizer constituent preparation, formulation, and use with consideration of the large-scale effects of each of these activities. Detailed reference is made to the chemical technology and emission control aspects of the pulp and paper industry and refinery operations. Throughout, integral process changes and waste recycling practices are directly related to emission control aspects of each process in a way to be useful to the student and professional alike. These excerpts are extracted from one of the first, single volume accounts to take this unified approach to the subject.

  20. Passive wireless tags for tongue controlled assistive technology interfaces

    Science.gov (United States)

    Rakibet, Osman O.; Horne, Robert J.; Kelly, Stephen W.

    2016-01-01

    Tongue control with low profile, passive mouth tags is demonstrated as a human–device interface by communicating values of tongue-tag separation over a wireless link. Confusion matrices are provided to demonstrate user accuracy in targeting by tongue position. Accuracy is found to increase dramatically after short training sequences with errors falling close to 1% in magnitude with zero missed targets. The rate at which users are able to learn accurate targeting with high accuracy indicates that this is an intuitive device to operate. The significance of the work is that innovative very unobtrusive, wireless tags can be used to provide intuitive human–computer interfaces based on low cost and disposable mouth mounted technology. With the development of an appropriate reading system, control of assistive devices such as computer mice or wheelchairs could be possible for tetraplegics and others who retain fine motor control capability of their tongues. The tags contain no battery and are intended to fit directly on the hard palate, detecting tongue position in the mouth with no need for tongue piercings. PMID:27222736

  1. Fly-by-light flight control system technology development plan

    Science.gov (United States)

    Chakravarty, A.; Berwick, J. W.; Griffith, D. M.; Marston, S. E.; Norton, R. L.

    1990-01-01

    The results of a four-month, phased effort to develop a Fly-by-Light Technology Development Plan are documented. The technical shortfalls for each phase were identified and a development plan to bridge the technical gap was developed. The production configuration was defined for a 757-type airplane, but it is suggested that the demonstration flight be conducted on the NASA Transport Systems Research Vehicle. The modifications required and verification and validation issues are delineated in this report. A detailed schedule for the phased introduction of fly-by-light system components has been generated. It is concluded that a fiber-optics program would contribute significantly toward developing the required state of readiness that will make a fly-by-light control system not only cost effective but reliable without mitigating the weight and high-energy radio frequency related benefits.

  2. Strengthening the non proliferation regime: French views

    International Nuclear Information System (INIS)

    Delaune, P.

    2013-01-01

    3 main issues can be identified in the French policy concerning the backing of non proliferation: 1) responding resolutely to proliferation crises, 2) reinforcing substantive efforts to prevent and impede proliferation, and 3) strengthening the non-proliferation regime. The first issue is very important because combating proliferation is vital to the security of all. Concerning the second issue, France attaches particular importance to strengthening specific measures to prevent and check proliferation. Let me mention a few proposals that we put forward: exports need to be controlled more effectively, proliferation activities have to be criminalized, or the development of proliferation-resistant technologies should be supported. Concerning the third issue it means the strengthening of the non-proliferation regime, France proposes several means: -) aiming at the universalization of the additional protocol; -) ensuring that the Agency continues to have sufficient human, financial and technical resources to fulfill its verification mission effectively; -) encouraging the IAEA to make full use of the authority available to it; -) enhancing the use of information relevant to the delivery of the IAEA mandate; and -) sharing more accurate information concerning the breaches of commitments that happen. The paper is followed by the slides of the presentation. (A.C.)

  3. Measuring autocratic regime stability

    Directory of Open Access Journals (Sweden)

    Joseph Wright

    2016-01-01

    Full Text Available Researchers measure regime stability in autocratic contexts using a variety of data sources that capture distinct concepts. Often this research uses concepts developed for the study of democratic politics, such as leadership change or institutionalized authority, to construct measures of regime breakdown in non-democratic contexts. This article assesses whether the measure a researcher chooses influences the results they obtain by examining data on executive leadership, political authority, and autocratic regimes. We illustrate the conceptual differences between these variables by extending recent studies in the literature on the political consequences of non-tax revenue and unearned foreign income.

  4. Effect of controlled inoculation with specific mycorrhizal fungi from the urban environment on growth and physiology of containerized shade tree species growing under different water regimes.

    Science.gov (United States)

    Fini, Alessio; Frangi, Piero; Amoroso, Gabriele; Piatti, Riccardo; Faoro, Marco; Bellasio, Chandra; Ferrini, Francesco

    2011-11-01

    The aim of this work was to evaluate the effects of selected mycorrhiza obtained in the urban environment on growth, leaf gas exchange, and drought tolerance of containerized plants growing in the nursery. Two-year-old uniform Acer campestre L., Tilia cordata Mill., and Quercus robur L. were inoculated with a mixture of infected roots and mycelium of selected arbuscular (maple, linden) and/or ectomycorrhiza (linden, oak) fungi and grown in well-watered or water shortage conditions. Plant biomass and leaf area were measured 1 and 2 years after inoculation. Leaf gas exchange, chlorophyll fluorescence, and water relations were measured during the first and second growing seasons after inoculation. Our data suggest that the mycelium-based inoculum used in this experiment was able to colonize the roots of the tree species growing in the nursery. Plant biomass was affected by water shortage, but not by inoculation. Leaf area was affected by water regime and, in oak and linden, by inoculation. Leaf gas exchange was affected by inoculation and water stress. V(cmax) and J(max) were increased by inoculation and decreased by water shortage in all species. F(v)/F(m) was also generally higher in inoculated plants than in control. Changes in PSII photochemistry and photosynthesis may be related to the capacity of inoculated plants to maintain less negative leaf water potential under drought conditions. The overall data suggest that inoculated plants were better able to maintain physiological activity during water stress in comparison to non-inoculated plants.

  5. Regimes de atmosfera controlada para o armazenamento de caqui ‘Kyoto’ Controlled atmosphere conditions for ‘Kyoto’ persimmon storage

    Directory of Open Access Journals (Sweden)

    Auri Brackmann

    2004-10-01

    Full Text Available O objetivo deste trabalho foi avaliar o efeito de regimes de atmosfera controlada associados ou não com o uso de baixa umidade relativa e com a aplicação pós-colheita de fungicida sobre a conservação da qualidade de caqui ‘Kyoto’. Após o período de dois meses de armazenamento refrigerado a -0,5°C mais cinco dias a 20ºC, a firmeza de polpa manteve-se mais elevada nos frutos submetidos a 0,5kPa de O2 e 5kPa de CO2. A maior incidência de podridões ocorreu nos frutos armazenados a 2kPa de O2 + 10kPa de CO2. Baixa umidade relativa (90% ou pressões parciais elevadas de CO2 (10 a 15kPa aumentaram o escurecimento da epiderme.This work aimed to evaluate the effect of different partial pressures of O2 and CO2, combined or not with the use of low relative humidity (RH and the postharvest fungicide application, on the quality of ‘Kyoto’ persimmons during controlled atmosphere (CA storage. After two months of storage at -0.5°C plus five days at 20ºC, the highest flesh firmness was obtained in fruits stored in CA conditions of 0.5kPa of O2 and 5kPa of CO2. The highest rot incidence was observed in fruits stored at 2kPa O2 + 10kPa CO2. Low RH (90% or high CO2 levels (10 to 15kPa led to increased skin blackening.

  6. Loss of Control Prevention and Recovery: Onboard Guidance, Control, and Systems Technologies

    Science.gov (United States)

    Belcastro, Christine M.

    2012-01-01

    Loss of control (LOC) is one of the largest contributors to fatal aircraft accidents worldwide. LOC accidents are complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. These LOC hazards include vehicle impairment conditions, external disturbances; vehicle upset conditions, and inappropriate crew actions or responses. Hence, there is no single intervention strategy to prevent these accidents. NASA previously defined a comprehensive research and technology development approach for reducing LOC accidents and an associated integrated system concept. Onboard technologies for improved situation awareness, guidance, and control for LOC prevention and recovery are needed as part of this approach. Such systems should include: LOC hazards effects detection and mitigation; upset detection, prevention and recovery; and mitigation of combined hazards. NASA is conducting research in each of these areas. This paper provides an overview of this research, including the near-term LOC focus and associated analysis, as well as preliminary flight system architecture.

  7. Cooperative Monitoring Center Occasional Paper/4: Missile Control in South Asia and the Role of Cooperative Monitoring Technology

    Energy Technology Data Exchange (ETDEWEB)

    Kamal, N.; Sawhney, P.

    1998-10-01

    The succession of nuclear tests by India and Pakistan in May 1998 has changed the nature of their missile rivalry, which is only one of numerous manifestations of their relationship as hardened adversaries, deeply sensitive to each other's existing and evolving defense capabilities. The political context surrounding this costly rivalry remains unmediated by arms control measures or by any nascent prospect of detente. As a parallel development, sensible voices in both countries will continue to talk of building mutual confidence through openness to avert accidents, misjudgments, and misinterpretations. To facilitate a future peace process, this paper offers possible suggestions for stabilization that could be applied to India's and Pakistan's missile situation. Appendices include descriptions of existing missile agreements that have contributed to better relations for other countries as well as a list of the cooperative monitoring technologies available to provide information useful in implementing subcontinent missile regimes.

  8. State-of-the-art report for the instrumentation and control technology based on the nuclear-information technology convergence

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Kee Choon; Kim, Chang Hwoi; Lee, Dong Young; Lee, Cheol Kwon; Lee, Hyun Chul [KAERI, Daejeon (Korea, Republic of)

    2011-12-15

    As digitalized the instrumentation and control systems in nuclear power plants, in the past that were implemented in an analog system or circuit for monitoring, control and protection, most of the them is implemented in embedded software based on hardware platform. Digital instrumentation and control system hardware platforms and a digital safety systems have developed in Korea. The fundamental technology of the software part of MMIS (Man-Machine Interface System) has achieved the localization. But in order to secure our global competitiveness, in the -based software, the source of the content areas / It is needed to develop core technologies of the software and contents areas based on the nuclear-IT convergence technology. In this report, the IT technology centered for the characteristics of embedded software applied to nuclear power is described. Also state-of-the-art IT technologies that will converge to nuclear power plants are mentioned

  9. Control and automation technology in United States nuclear power plants

    International Nuclear Information System (INIS)

    The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as well as economic competition, have become stronger. The rapid advance of computer hardware and software technology in the last two decades has greatly enlarged the potential of computer applications to plant instrumentation and control of future plants, as well as those needed for operation of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to automate plant control functions and to enhance human performance and productivity. The major goals of using computers for instrumentation and control of nuclear power plants are (1) to improve safety; (2) to reduce challenges to the power plant; (3) to reduce the cost of operations and maintenance; (4) to enhance power production, and (5) to increase productivity of people. Many functions in nuclear power plants are achieved by a combination of human action and automation. Increasingly, computer-based systems are used to support operations and maintenance personnel in the performance of their tasks. There are many benefits which can accrue from the use of computers but it is important to ensure that the design and implementation of the support system and the human task places the human in the correct role in relation to the machine; that is, in a management position, with the computer serving the human. In addition, consideration must be given to computer system integrity, software validation and verification, consequences of error, etc., to ensure its reliability for nuclear power plant applications. (author). 31 refs

  10. Phase Change Permeation Technology for Environmental Control & Life Support Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is evaluating Dutyion™, a phase change permeation membrane technology developed by Design Technology and Irrigation (DTI), for use in future advanced life...

  11. Energy technology characterizations handbook: Environmental pollution and control factors, third edition

    Science.gov (United States)

    1983-03-01

    Energy technologies and pollution control technologies are reviewed. Technology characterizations are given for the following energy sources: nuclear energy, synthetic fuels, coal, petroleum, natural gas, solar energy, geothermal energy, and hydroelectric energy. Air, water, and solid waste pollution control devices and mechanisms are presented for coal-fired power plants and industrial boilers and for synthetic fuel production from coal and oil shale.

  12. 75 FR 15655 - Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...

    Science.gov (United States)

    2010-03-30

    ... Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air Act Sections... Request for Requirements for Control Technology Determinations from Major Sources in Accordance with Clean... available from the Clean Air Technology Center developed pursuant to section 112(l)(3) of the Act; (5...

  13. Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bower, Gordon Ross [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hill, Rachael Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary Alexander [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-07-01

    In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

  14. Scalable quantum memory in the ultrastrong coupling regime.

    Science.gov (United States)

    Kyaw, T H; Felicetti, S; Romero, G; Solano, E; Kwek, L-C

    2015-03-02

    Circuit quantum electrodynamics, consisting of superconducting artificial atoms coupled to on-chip resonators, represents a prime candidate to implement the scalable quantum computing architecture because of the presence of good tunability and controllability. Furthermore, recent advances have pushed the technology towards the ultrastrong coupling regime of light-matter interaction, where the qubit-resonator coupling strength reaches a considerable fraction of the resonator frequency. Here, we propose a qubit-resonator system operating in that regime, as a quantum memory device and study the storage and retrieval of quantum information in and from the Z2 parity-protected quantum memory, within experimentally feasible schemes. We are also convinced that our proposal might pave a way to realize a scalable quantum random-access memory due to its fast storage and readout performances.

  15. Human factors phase III : effects of train control technology on operator performance.

    Science.gov (United States)

    2005-01-31

    This report describes a study evaluating the effects of train control technology on locomotive engineer performance. Several types of train control systems were evaluated: partial automation (cruise control and programmed stop) and full automation we...

  16. Systems engineering identification and control of mixed waste technology development

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1997-01-01

    The Department of Energy (DOE) established the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop technologies required to meet the Department's commitments for treatment of mixed low-level and transuranic wastes. Waste treatment includes all necessary steps from generation through disposal. Systems engineering was employed to reduce programmatic risk, that is, risk of failure to meet technical commitments within cost and schedule. Customer needs (technology deficiencies) are identified from Site Treatment Plans, Consent Orders, ten year plans, Site Technical Coordinating Groups, Stakeholders, and Site Visits. The Technical Baseline, a prioritized list of technology deficiencies, forms the basis for determining which technology development activities will be supported by the MWFA. Technology Development Requirements Documents are prepared for each technology selected for development. After technologies have been successfully developed and demonstrated, they are documented in a Technology Performance Report. The Technology Performance Reports are available to any of the customers or potential users of the technology, thus closing the loop between problem identification and product development. This systematic approach to technology development and its effectiveness after 3 years is discussed in this paper

  17. Mercury Emission Control Technologies for PPL Montana-Colstrip Testing

    Energy Technology Data Exchange (ETDEWEB)

    John P. Kay; Michael L. Jones; Steven A. Benson

    2007-04-01

    The Energy & Environmental Research Center (EERC) was asked by PPL Montana LLC (PPL) to provide assistance and develop an approach to identify cost-effective options for mercury control at its coal-fired power plants. The work conducted focused on baseline mercury level and speciation measurement, short-term parametric testing, and week long testing of mercury control technology at Colstrip Unit 3. Three techniques and various combinations of these techniques were identified as viable options for mercury control. The options included oxidizing agents or sorbent enhancement additives (SEAs) such as chlorine-based SEA1 and an EERC proprietary SEA2 with and without activated carbon injection. Baseline mercury emissions from Colstrip Unit 3 are comparatively low relative to other Powder River Basin (PRB) coal-fired systems and were found to range from 5 to 6.5 g/Nm3 (2.9 to 3.8 lb/TBtu), with a rough value of approximately 80% being elemental upstream of the scrubber and higher than 95% being elemental at the outlet. Levels in the stack were also greater than 95% elemental. Baseline mercury removal across the scrubber is fairly variable but generally tends to be about 5% to 10%. Parametric results of carbon injection alone yielded minimal reduction in Hg emissions. SEA1 injection resulted in 20% additional reduction over baseline with the maximum rate of 400 ppm (3 gal/min). Week long testing was conducted with the combination of SEA2 and carbon, with injection rates of 75 ppm (10.3 lb/hr) and 1.5 lb/MMacf (40 lb/hr), respectively. Reduction was found to be an additional 30% and, overall during the testing period, was measured to be 38% across the scrubber. The novel additive injection method, known as novel SEA2, is several orders of magnitude safer and less expensive than current SEA2 injection methods. However, used in conjunction with this plant configuration, the technology did not demonstrate a significant level of mercury reduction. Near-future use of this

  18. ECOLOGICAL CONTROL EQUIPMENT AND TECHNOLOGY OF UNDERWATER VEGETATION DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    V. TITINSCHNEIDER

    2008-10-01

    Full Text Available The excess of aquatic submerse vegetation development carries to the reduction of the real rearing area for the piscicultural material from the production farms and allow nestling of the ichthyophages bird species that decrease the fish production. Aquatic submerse vegetation stumble the utilization of aquatic zones for recreation and also wright function of basins utilized for the electric energy production, of micro electricity works through obstruction of the dams grid. The control of the aquatic submerse vegetation development, for Myriophyllum verticillatum, Ceratophyllum submersum, Urticularia vulgaris, Potamogeton natans, Nimphoides peltata species it is accomplish through the removing of some parts of these, preferably with all the stump system. Usually, these its accomplish with the floating equipments fit up with the thermic engines and the propulsion and governating elements who have harm over the fish and some others aquatic organisms through the noise, the displacing a large quality of water caused of propulsion systems and through the noxes elimination (flue, carburant trails, etc.. These technologies reside from the evacuation of the aquatic submerse vegetation and the stump systems of these with the help of an adjustable rake, hang up from the coast by a rope, wrapped to a drummer, who is trained by a motto-propeller group with a small installed power.

  19. Quality control and in-service inspection technology for hybrid-composite girder bridges.

    Science.gov (United States)

    2014-08-01

    This report describes efforts to develop quality control tools and in-service inspection technologies for the fabrication and construction of Hybrid Composite Beams (HCBs). HCBs are a new bridge technology currently being evaluated by the Missouri De...

  20. Bubble Size Control to Improve Oxygen-Based Bleaching: Characterization of Flow Regimes in Pulp-Water-Gas Three-Phase Flows

    Energy Technology Data Exchange (ETDEWEB)

    S.M. Ghiaasiaan and Seppo Karrila

    2006-03-20

    Flow characteristics of fibrous paper pulp-water-air slurries were investigated in a vertical circular column 1.8 m long, with 5.08 cm diameter. Flow structures, gas holdup (void fraction), and the geometric and population characteristics of gas bubbles were experimentally investigated, using visual observation, Gamma-ray densitometry, and flash X-ray photography. Five distinct flow regimes could be visually identified: dispersed bubbly, layered bubbly, plug, churn-turbulent, and slug. Flow regime maps were constructed, and the regime transition lines were found to be sensitive to consistency. The feasibility of using artificial neural networks (ANNs) for the identification of the flow regimes, using the statistical characteristics of pressure fluctuations measured by a single pressure sensor, was demonstrated. Local pressure fluctuations at a station were recorded with a minimally-intrusive transducer. Three-layer, feed-forward ANNs were designed that could identify the four major flow patterns (bubbly, plug, churn, and slug) well. The feasibility of a transportable artificial neural network (ANN) - based technique for the classification of flow regimes was also examined. Local pressures were recorded at three different locations using three independent but similar transducers. An ANN was designed, trained and successfully tested for the classification of the flow regimes using one of the normalized pressure signals (from Sensor 1). The ANN trained and tested for Sensor 1 predicted the flow regimes reasonably well when applied directly to the other two sensors, indicating a good deal of transportability. An ANN-based method was also developed, whereby the power spectrum density characteristics of other sensors were adjusted before they were used as input to the ANN that was based on Sensor 1 alone. The method improved the predictions. The gas-liquid interfacial surface area concentration was also measured in the study. The gas absorption technique was applied

  1. Technological substitution options for controlling greenhouse gas emissions

    International Nuclear Information System (INIS)

    Barbier, E.B.; Burgess, J.C.; Pearce, D.W.

    1991-01-01

    This chapter is concerned with technological options for greenhouse gas substitution. The authors interpret the term substitution to exclude energy conservation/efficiency measures, investments in afforestation (sinks), and greenhouse gas removal or abatement technologies. Their working definition of greenhouse gas substitution includes (1) replacement technologies, for example, substituting a greenhouse gas technology with a nongreenhouse gas technology; and (2) reduction technologies, for example, substituting a greenhouse gas technology with an alternative technology that reduces greenhouse gas emissions. Essentially, replacement technologies involve 100 percent reduction in CO 2 ; reduction technologies involve a partial reduction in CO 2 . Of the man-made sources of greenhouse gases, energy is the most important and is expected to contribute to at least half of the global warming effect in the near future. The majority of this impact is from fossil fuel combustion as a source of carbon dioxide (CO 2 ), although fossil fuels also contribute significantly to methane (CH 4 ), to nitrous oxide (N 2 O), and to low-level ozone (O 3 ) through production of various nitrogen gases (NO x ) and carbon monoxide (CO). This study analyzes the available greenhouse gas substitutions and their costs. The authors concentrate particularly on substitutions for fossil-fuel combustion and CFC production and consumption. They conclude by summarizing the potential for greenhouse gas substitution, the cost-effectiveness of the various options and the design of incentives for substitution

  2. THE INFLUENCED FLOW REGIMES

    Directory of Open Access Journals (Sweden)

    Gavril PANDI

    2011-03-01

    Full Text Available The influenced flow regimes. The presence and activities ofhumanity influences the uniform environmental system, and in this context, therivers water resources. In concordance with this, the natural runoff regime suffersbigger and deeper changes. The nature of these changes depending on the type anddegree of water uses. The multitude of the use cause different types of influence,whit different quantitative aspects. In the same time, the influences havequalitative connotations, too, regarding to the modifications of the yearly watervolume runoff. So the natural runoff regime is modified. After analyzing thedistribution laws of the monthly runoff, there have been differenced four types ofinfluenced runoff regimes. In the excess type the influenced runoff is bigger thanthe natural, continuously in the whole year. The deficient type is characterized byinverse rapports like the first type, in the whole year. In the sinusoidal type, theinfluenced runoff is smaller than the natural in the period when the water isretained in the lake reservoirs, and in the depletion period the situation inverts. Atthe irregular type the ratio between influenced and natural runoff is changeable ina random meaner monthly. The recognition of the influenced regime and the gradeof influence are necessary in the evaluation and analysis of the usable hydrologicalriver resources, in the flood defence activities, in the complex scheme of thehydrographic basins, in the environment design and so on.

  3. Arctic circulation regimes.

    Science.gov (United States)

    Proshutinsky, Andrey; Dukhovskoy, Dmitry; Timmermans, Mary-Louise; Krishfield, Richard; Bamber, Jonathan L

    2015-10-13

    Between 1948 and 1996, mean annual environmental parameters in the Arctic experienced a well-pronounced decadal variability with two basic circulation patterns: cyclonic and anticyclonic alternating at 5 to 7 year intervals. During cyclonic regimes, low sea-level atmospheric pressure (SLP) dominated over the Arctic Ocean driving sea ice and the upper ocean counterclockwise; the Arctic atmosphere was relatively warm and humid, and freshwater flux from the Arctic Ocean towards the subarctic seas was intensified. By contrast, during anticylonic circulation regimes, high SLP dominated driving sea ice and the upper ocean clockwise. Meanwhile, the atmosphere was cold and dry and the freshwater flux from the Arctic to the subarctic seas was reduced. Since 1997, however, the Arctic system has been under the influence of an anticyclonic circulation regime (17 years) with a set of environmental parameters that are atypical for this regime. We discuss a hypothesis explaining the causes and mechanisms regulating the intensity and duration of Arctic circulation regimes, and speculate how changes in freshwater fluxes from the Arctic Ocean and Greenland impact environmental conditions and interrupt their decadal variability. © 2015 The Authors.

  4. NASA Earth Science Mission Control Center Enterprise Emerging Technology Study Study (MCC Technology Study)

    Science.gov (United States)

    Smith, Dan; Horan, Stephen; Royer, Don; Sullivan, Don; Moe, Karen

    2015-01-01

    This paper reports on the results of the study to identify technologies that could have a significant impact on Earth Science mission operations when looking out at the 5-15 year horizon (through 2025). The potential benefits of the new technologies will be discussed, as well as recommendations for early research and development, prototyping, or analysis for these technologies.

  5. Rapid control prototyping - new technologies and tools; Rapid Control Prototyping - neue Moeglichkeiten und Werkzeuge

    Energy Technology Data Exchange (ETDEWEB)

    Otterbach, R.; Eckmann, M.; Mertens, F. [dSPACE GmbH, Paderborn (Germany)

    2004-06-01

    The paper presents the status quo in rapid control prototyping (RCP) and discusses further developments of this technology. The complete functional chain, from sensors to data preprocessing and the real-time processor, right through to control of the actuators, is created as an integrated hardware and software solution. The greatest flexibility and configurability are achieved with a modular platform concept that includes signal conditioning and power stages. The architecture of modern microcontrollers and electronic control units (ECUs) result in new requirements in the field of bypassing. These are fulfilled by appropriate solutions based on on-chip debug interfaces and standardized data protocols on serial busses. RCP support for developing networked, time-triggered vehicle systems, and the particular requirements for the tool environment, are described using FlexRay as an example. (orig.)

  6. Malaria control under the Taliban regime: insecticide-treated net purchasing, coverage, and usage among men and women in eastern Afghanistan

    Directory of Open Access Journals (Sweden)

    Jones Caroline

    2010-01-01

    Full Text Available Abstract Background Scaling up insecticide-treated mosquito net (ITN coverage is a key malaria control strategy even in conflict-affected countries 12. Socio-economic factors influence access to ITNs whether subsidized or provided free to users. This study examines reported ITN purchasing, coverage, and usage in eastern Afghanistan and explores women's access to health information during the Taliban regime (1996-2001. This strengthens the knowledge base on household-level health choices in complex-emergency settings. Methods Fifteen focus group discussions (FGDs and thirty in-depth interviews were conducted with men and women from ITN-owning and non-owning households. FGDs included rank ordering, pile sorting and focused discussion of malaria knowledge and ITN purchasing. Interviews explored general health issues, prevention and treatment practices, and women's malaria knowledge and concerns. Seven key informant interviews with health-related workers and a concurrent survey of 200 ITN-owning and 214 non-owning households were used to clarify or quantify findings. Results Malaria knowledge was similar among men and women and ITN owners and non-owners. Women reported obtaining health information through a variety of sources including clinic staff, their husbands who had easier access to information, and particularly female peers. Most participants considered ITNs very desirable, though not usually household necessities. ITN owners reported more household assets than non-owners. Male ITN owners and non-owners ranked rugs and ITNs as most desired, while women ranked personal assets such as jewellery highest. While men were primarily responsible for household decision-making and purchasing, older women exerted considerable influence. Widow-led and landless households reported most difficulties purchasing ITNs. Most participants wanted to buy ITNs only if they could cover all household members. When not possible, preferential usage was given to women

  7. Malaria control under the Taliban regime: insecticide-treated net purchasing, coverage, and usage among men and women in eastern Afghanistan.

    Science.gov (United States)

    Howard, Natasha; Shafi, Ahmad; Jones, Caroline; Rowland, Mark

    2010-01-06

    Scaling up insecticide-treated mosquito net (ITN) coverage is a key malaria control strategy even in conflict-affected countries 12. Socio-economic factors influence access to ITNs whether subsidized or provided free to users. This study examines reported ITN purchasing, coverage, and usage in eastern Afghanistan and explores women's access to health information during the Taliban regime (1996-2001). This strengthens the knowledge base on household-level health choices in complex-emergency settings. Fifteen focus group discussions (FGDs) and thirty in-depth interviews were conducted with men and women from ITN-owning and non-owning households. FGDs included rank ordering, pile sorting and focused discussion of malaria knowledge and ITN purchasing. Interviews explored general health issues, prevention and treatment practices, and women's malaria knowledge and concerns. Seven key informant interviews with health-related workers and a concurrent survey of 200 ITN-owning and 214 non-owning households were used to clarify or quantify findings. Malaria knowledge was similar among men and women and ITN owners and non-owners. Women reported obtaining health information through a variety of sources including clinic staff, their husbands who had easier access to information, and particularly female peers. Most participants considered ITNs very desirable, though not usually household necessities. ITN owners reported more household assets than non-owners. Male ITN owners and non-owners ranked rugs and ITNs as most desired, while women ranked personal assets such as jewellery highest. While men were primarily responsible for household decision-making and purchasing, older women exerted considerable influence. Widow-led and landless households reported most difficulties purchasing ITNs. Most participants wanted to buy ITNs only if they could cover all household members. When not possible, preferential usage was given to women and children. Despite restricted access to health

  8. Application of new technology to SMART instrumentation and control systems

    International Nuclear Information System (INIS)

    Park, Heui Youn; Lee, C. K.; Kim, D. H.; Suh, Y. S.; Hur, S.; Seong, S. H.; Jang, G. S.; Koo, I. S.; Chang, M. H.

    1998-03-01

    It is very important to examine the conformance with licensing requirements and standards when new digital technology and equipment apply to nuclear plants. Key requirements of licensing on digitalisation using new technologies are software and hardware V and V, reliability of communication network, and diversity and defence-in-depth concept against common mode failures of hardware and software. And it should be also evaluated whether the selection and application of new technology comply with the design concept and requirements of SMART MMIS or not. In this report, we reviewed digitalisation materials such as EPRI's ALWR utility requirements document, I and C upgrade plan, guideline on licensing digital upgrades, and IAEA's issues and approaches to plant modernization to explore application method on new I and C technologies, and evaluated the state of applicable new technologies for SMART MMIS which are selected from the technologies, methods, and manuals of the industrial area. (author). 36 refs., 15 tabs

  9. Application of new technology to SMART instrumentation and control systems

    Energy Technology Data Exchange (ETDEWEB)

    Park, Heui Youn; Lee, C. K.; Kim, D. H.; Suh, Y. S.; Hur, S.; Seong, S. H.; Jang, G. S.; Koo, I. S.; Chang, M. H

    1998-03-01

    It is very important to examine the conformance with licensing requirements and standards when new digital technology and equipment apply to nuclear plants. Key requirements of licensing on digitalisation using new technologies are software and hardware V and V, reliability of communication network, and diversity and defence-in-depth concept against common mode failures of hardware and software. And it should be also evaluated whether the selection and application of new technology comply with the design concept and requirements of SMART MMIS or not. In this report, we reviewed digitalisation materials such as EPRI`s ALWR utility requirements document, I and C upgrade plan, guideline on licensing digital upgrades, and IAEA`s issues and approaches to plant modernization to explore application method on new I and C technologies, and evaluated the state of applicable new technologies for SMART MMIS which are selected from the technologies, methods, and manuals of the industrial area. (author). 36 refs., 15 tabs.

  10. Exploring the Possible Use of Information Barriers for future Biological Weapons Verification Regimes

    Energy Technology Data Exchange (ETDEWEB)

    Luke, S J

    2011-12-20

    This report describes a path forward for implementing information barriers in a future generic biological arms-control verification regime. Information barriers have become a staple of discussion in the area of arms control verification approaches for nuclear weapons and components. Information barriers when used with a measurement system allow for the determination that an item has sensitive characteristics without releasing any of the sensitive information. Over the last 15 years the United States (with the Russian Federation) has led on the development of information barriers in the area of the verification of nuclear weapons and nuclear components. The work of the US and the Russian Federation has prompted other states (e.g., UK and Norway) to consider the merits of information barriers for possible verification regimes. In the context of a biological weapons control verification regime, the dual-use nature of the biotechnology will require protection of sensitive information while allowing for the verification of treaty commitments. A major question that has arisen is whether - in a biological weapons verification regime - the presence or absence of a weapon pathogen can be determined without revealing any information about possible sensitive or proprietary information contained in the genetic materials being declared under a verification regime. This study indicates that a verification regime could be constructed using a small number of pathogens that spans the range of known biological weapons agents. Since the number of possible pathogens is small it is possible and prudent to treat these pathogens as analogies to attributes in a nuclear verification regime. This study has determined that there may be some information that needs to be protected in a biological weapons control verification regime. To protect this information, the study concludes that the Lawrence Livermore Microbial Detection Array may be a suitable technology for the detection of the

  11. Emerging melt quality control solution technologies for aluminium melt

    Directory of Open Access Journals (Sweden)

    Arturo Pascual, Jr

    2009-11-01

    Full Text Available The newly developed “MTS 1500” Melt Treatment System is performing the specifi cally required melt treatment operations like degassing, cleaning, modification and/or grain refinement by an automated process in one step and at the same location. This linked process is saving time, energy and metal losses allowing - by automated dosage of the melt treatment agents - the production of a consistent melt quality batch after batch. By linking the MTS Metal Treatment System with sensors operating on-line in the melt, i.e., with a hydrogen sensor “Alspek H”, a fully automated control of parts of the process chain like degassing is possible. This technology does guarantee a pre-specifi ed and documented melt quality in each melt treatment batch. Furthermore, to ensure that castings are consistent and predictable there is a growing realization that critical parameters such as metal cleanliness must be measured prior to casting. There exists accepted methods for measuring the cleanliness of an aluminum melt but these can be both slow and costly. A simple, rapid and meaningful method of measuring and bench marking the cleanliness of an aluminum melt has been developed to offer the foundry a practical method of measuring melt cleanliness. This paper shows the structure and performance of the integrated MTS melt treatment process and documents achieved melt quality standards after degassing, cleaning, modifi cation and grain refi nement operations under real foundry conditions. It also provides an insight on a melt cleanliness measuring device “Alspek MQ” to provide foundry men better tools in meeting the increasing quality and tighter specifi cation demand from the industry.

  12. Wastewater and sludge control-technology options for synfuels industries

    Energy Technology Data Exchange (ETDEWEB)

    Castaldi, F.J.; Harrison, W.; Ford, D.L.

    1981-02-01

    The options examined were those of zero discharge, partial water reuse with restricted discharge of treated effluents, and unrestricted discharge of treated effluents. Analysis of cost data and performance-analyses data for several candidate secondary-wastewater-treatment unit processes indicated that combined activated-sludge/powdered-activated-carbon (AS/PAC) treatment incorporating wet-air-oxidation carbon regeneration is the most cost-effective control technology available for the removal of organic material from slagging, fixed-bed process wastewaters. Bench-scale treatability and organic-constituent removal studies conducted on process quench waters from a pilot-scale, slagging, fixed-bed gasifer using lignite as feedstock indicated that solvent extraction followed by AS/PAC treatment reduces levels of extractable and chromatographable organics to less than 1 ..mu..g/L in the final effluent. Levels of conventional pollutants also were effectively reduced by AS/PAC to the minimum water-quality standards for most receiving waters. The most favored and most cost-effective treatment option is unrestricted discharge of treated effluents with ultimate disposal of biosludges and landfilling of gasifier ash and slag. This option requires a capital expenditure of $8,260,000 and an annual net operating cost of $2,869,000 in 1978 dollars, exclusive of slag disposal. The net energy requirement of 19.6 x 10/sup 6/ kWh/year, or 15.3 kWh/1000 gal treated, is less than 6% of the equivalent energy demand associated with the zero-discharge option.

  13. Transmission Control of Transport and Technological Cars in Acceleration Mode

    Directory of Open Access Journals (Sweden)

    B. I. Plujnikov

    2015-01-01

    Full Text Available In most structures a transmission of the transport-technological machine (TTM is controlled by automatic systems. In their creating it is necessary to specify the appropriate parameters and algorithms. In the total balance of the machine run time the acceleration mode is the most important. Therefore, an algorithm of the transmission gear ratio change during acceleration largely provides desirable rating of machines.It is known that the process of acceleration is estimated by its dynamic quality and fuel economy. To reach the best rating of both simultaneously is impossible. Therefore, as the criteria of estimate, were chosen the time and fuel consumption during acceleration to a fixed speed value.From a mathematical point of view, these criteria represent the sum of integrals, each of which defines the time or the fuel consumption during acceleration with a certain transmission gear ratio. The problem is formulated as follows: to determine the speed values of the TTM at the moments when the transmission gear ratio is changed providing the minimum values during fixed fuel supply for the estimate criteria. The latter condition in a certain way limits the task, but in explicit form there is no this control action in the dependence data.Given the variety of possible design options for the TTM, the solution is given by a specific example that simplifies the mathematics and makes it easier to understand the results obtained. As a TTM, is considered a passenger car with petrol engine and automatic transmission, which includes a hydrodynamic transformer and three-speed gearbox.A chosen way of solving the problem involves using the theory of ordinary maxima and minima, which allows finding the unknown values of independent variables. The expressions of sub-integral functions are in explicit form obtained and studied for meeting the necessary and sufficient conditions for existence of the extreme point. The result was a proof that in the case of

  14. American export control, technology spillover and innovation of Chinese pharmaceutical Industry.

    Science.gov (United States)

    Hui, Jiang

    2017-05-01

    This paper was aimed to analyze whether the U.S. strict export control to China affects the technological innovation of Chinese pharmaceutical industry. This paper selected the data of technological innovation and the expenditure of high and new technology adoption in China's pharmaceutical industry from 1995 to 2014, created panel regression model to study the impact of export controls on technology spillovers and the impact of technology spillovers on innovation capacity. The results show that US export control has a significant impact on technology spillovers, but foreign technology spillovers have no significant impact on the innovation of Chinese pharmaceutical industry. Although the US export control prevented foreign technology spillovers to China, but indirectly stimulated the domestic technology spillovers to pharmaceutical manufacturing industry in China. Statistical analysis show that the correlation coefficient between innovation capacity and expenditure for high technology adoption is not significant, but the expenditure of purchasing domestic technical is essential to pharmaceutical innovation. This study shows that US export control indirectly, not directly, affected the technological innovation of China's pharmaceutical industry, affected the allocation of innovative resources, but failed to prevent the technological progress and competitiveness improvement of Chinese pharmaceutical industry.

  15. Passive Technology to Improve Criticality Control of NTP Reactors, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR will develop passive reactor criticality control technology for Nuclear Thermal Propulsion (NTP) identified by Ultra Safe Nuclear Corporation (USNC) in...

  16. Counterproliferation, Border Security and Counterterrorism Subject-Related Laws and Regulations, Including Export Control Regimes in South-Eastern European Countries

    International Nuclear Information System (INIS)

    Bokan, S.

    2007-01-01

    gaps exist, much less fill them. All this suggests that, to fulfil obligations under UNSC Resolutions 1540 and 1373, States must enact harmonized criminal prohibitions and authorization for law enforcement cooperation in order to establish a seamless web of security among all nations. Failure to do so implicitly poses a threat to international peace and security. One of the main issues which deserve to be further addressed and which prompts the continuation of the Southeast Europe Counterproliferation, Borger Security and Counterterrorism (CBSC) Working Group is to harmonize national laws and regulations that deal with deterring, detecting and interdicting WMD. Inventory of relevant CBSC subject-related laws of the Southeast Europe countries, including Export Control Laws was created and prepared for further consideration and harmonization by judiciary experts, with the aim to develop m odel laws . Let me very briefly present you the main features of the SEDM CBSC subject-related laws and regulations. This paper will present that inventory which includes the membership in the international Conventions, Treaties and Arrangements and also the membership in Multilateral Export Control Regimes of Southeast Europe countries. Also, it will be presented the membership in the international legal instruments that play an integral part in the global fight against terrorism. (author)

  17. East Asian welfare regime

    DEFF Research Database (Denmark)

    Abrahamson, Peter

    2017-01-01

    The paper asks if East Asian welfare regimes are still productivist and Confucian? And, have they developed public care policies? The literature is split on the first question but (mostly) confirmative on the second. Care has to a large, but insufficient extent, been rolled out in the region...

  18. Supply regimes in fisheries

    DEFF Research Database (Denmark)

    Nielsen, Max

    2006-01-01

    Supply in fisheries is traditionally known for its backward bending nature, owing to externalities in production. Such a supply regime, however, exist only for pure open access fisheries. Since most fisheries worldwide are neither pure open access, nor optimally managed, rather between the extrem...

  19. Effects of supervisory train control technology on operator attention.

    Science.gov (United States)

    2005-07-31

    This report describes an experiment evaluating the effects of supervisory control automation on attention allocation while operating : a train. The study compared two levels of supervisory control (partial and full) to manual control, in terms of how...

  20. Automated Service Discovery using Autonomous Control Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  1. Future Seabasing Technology Analysis: Logistics Command and Control

    National Research Council Canada - National Science Library

    Douglass, C. H

    2006-01-01

    The Center for Naval Analyses (CNA) was tasked by the Office of Naval Research (ONR) to review the Navy's seabasing concept, identify potential operational problems, and propose science and technology...

  2. Biological control and management of the detoxication wastewater treatment technologies

    Directory of Open Access Journals (Sweden)

    Topalova Yana

    2007-01-01

    Full Text Available Detoxication technologies require the combination of theoretical and practical knowledge of xenobiotic biodegradation, wastewater treatment technologies, and management rules. The purpose of this complicated combination is to propose specialized strategies for detoxication, based on lab- and pilot-scale modeling. These strategies include preliminary created algorithms for preventing the risk of water pollution and sediments. The technologies and algorithms are essentially important outcome, applied in the textile, pharmaceutical, cosmetic, woodtreating, and oiltreating industries. In this paper four rehabilitation technologies for pretreatment of water contaminated by pentachlorophenol (PCP have been developed in the frame of the European and Bulgarian National projects. Emphasize is put on the biological systems and their potential of detoxication management. The light and transmission electron microscopy of the reconstructed activated sludges the microbial, kinetic and enzymological indicators are presented and approved as critical points in the biocontrol.

  3. Automated Service Discovery using Autonomous Control Technologies, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — With the advent of mobile commerce technologies, the realization of pervasive computing and the formation of ad-hoc networks can be leveraged to the benefit of the...

  4. How Do Managers Control Technology-Intensive Work?

    OpenAIRE

    Angelo Bernard Pinheiro

    2010-01-01

    Technology pervades every aspect of the modern business enterprise and demands new strategies for work management. Advances in internet and computing technologies, the emergence of the “knowledge worker”, globalization, resource scarcity, and intense competition have led corporations to accomplish their strategic goals and objectives through the implementation of projects. Project success is assured by the effective use of financial and human resources, a project management (PM) framework bac...

  5. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    OpenAIRE

    Roisin P. Corcoran; Steven M. Ross; Beverly J. Irby; Fuhui Tong; Rafael Lara-Alecio; Cindy Guerrero

    2014-01-01

    This paper describes the use of technology to provide virtual professional development (VPD) for teachers and to conduct classroom observations in a study of English Language Learner (ELL) instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT) design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral l...

  6. METHODS FOR EVALUATION OF COMPANIES’ INFORMATION SYSTEMS AND TECHNOLOGIES EFFICIENCY AND CONTROL IN TEACHING COURSE "INFORMATION TECHNOLOGY GOVERNANCE"

    Directory of Open Access Journals (Sweden)

    Samchynska Yaroslava

    2014-10-01

    Full Text Available The use of the information systems and technologies in economic activity is called to represent companies’ corporate principles, aims, traditions, to help in realization of the planned strategies, thanks to that the management efficiency and the cost of enterprise increases. Teaching for educational discipline «IT Governance» is directed on a study and research of these intercommunications by students of the 5th course on specialties «Computer Science», «Software Engineering» for educational level Specialist (Past Bachelor Degree, Master degree. The auditing services belong to the actual methods for evaluation of the information systems and technologies efficiency and control, which are studied according to the course «IT Governance». The article deals with the methodological basis of providing auditing services for evaluation of efficiency and control of information systems (technologies for the purpose of satisfaction of growing informational needs of companies and functional activation in their information resources. The main task of auditing services for control of information systems (information communication technologies efficiency is to evaluate independently and objectively if the information technologies provide the necessary services. The basic criteria, data ware, subject and object of audit necessary for drawing up an audit report and assurance declaring are established. The program and a detailed list of auditing procedures for evaluation of efficiency of information systems and technologies have been presented

  7. \\t Capital Planning and Investment Control (CPIC) for the Management of Information Technology Investments

    Science.gov (United States)

    Capital Planning and Investment Control (CPIC) is the Information Technology (IT) governance and management methodology in use at EPA for selecting, controlling and evaluating the performance of EPA IT investments throughout the full lifecycle.

  8. Technologies of monitoring, alerting and controlling for coal fires in China

    Science.gov (United States)

    Deng, Jun; Xiao, Yang; Luo, Zhen-Min; Zhang, Yan-Ni; Zheng, Xue-Zhao

    2017-04-01

    Coalfield fire has become a global disaster, especially in China, which lost a large number of coal resources every year, and caused serious destruction of ecological environment. Coalfield fire area has become urgent to solve the problem for the complex, combustion long-time, wide range, fire source hidden, and controlling difficultly in the formed evolution process. At present, surface coal fire areas prospecting technology mainly have visible light on surface, surface radar remote sensing technology, air ground integration technology. Detecting hidden fire source technology are infrared thermal imaging technology, method of radon-test. The technologies of monitoring and early warning for fire areas with ad-hoc, intelligent monitoring for infrared thermal imaging real time networks are applied. The idea of district controlling as "prevention-control-extinguishing" is established and in-site applications, which the technologies and equipment of fire prevention and extinguishment include the inorganic filling plugging, liquid carbon dioxide, and series of colloidal materials.

  9. Development of technologies for national control of and accountancy for nuclear materials

    International Nuclear Information System (INIS)

    Choi, Young Myung; Kwack, E. H.; Kim, B. K.

    2002-03-01

    The aim of this project is to establish a rigid foundation of national safeguards and to develop the new technologies for the nuclear control. This project is composed of four different technologies; 1. Monitoring technology for nuclear materials, 2. Detection technology for a single particle, 3. Safeguards information management technology, 4. Physical protection technology. Various studies such as a remote verification system for CANDU spent fuel in dry storage canister, a spent fuel verification system using an optical fiber scintillator, and development of softwares for safeguards and physical protection were performed in the frist phase('99-'01). As a result of this research, it has been identified that the developed technologies could be a crucial means of the control for the nuclear material and facilities related. We are planing to accomplish a steady national safeguard system in the second phase('02-'06). This research will help to elevate the transparency and credibility in national nuclear activities by improving the relative technologies

  10. [A strategy of constructing the technological system for quality control of Chinese medicine based on process control and management].

    Science.gov (United States)

    Cheng, Yi-Yu; Qian, Zhong-Zhi; Zhang, Bo-Li

    2017-01-01

    The current situation, bottleneck problems and severe challenges in quality control technology of Chinese Medicine (CM) are briefly described. It is presented to change the phenomenon related to the post-test as the main means and contempt for process control in drug regulation, reverse the situation of neglecting the development of process control and management technology for pharmaceutical manufacture and reconstruct the technological system for quality control of CM products. The regulation and technology system based on process control and management for controlling CM quality should be established to solve weighty realistic problems of CM industry from the root causes, including backwardness of quality control technology, weakness of quality risk control measures, poor reputation of product quality and so on. By this way, the obstacles from poor controllability of CM product quality could be broken. Concentrating on those difficult problems and weak links in the technical field of CM quality control, it is proposed to build CMC (Chemistry, Manufacturing and Controls) regulation for CM products with Chinese characteristics and promote the regulation international recognition as soon as possible. The CMC technical framework, which is clinical efficacy-oriented, manufacturing manner-centered and process control-focused, was designed. To address the clinical characteristics of traditional Chinese medicine (TCM) and the production feature of CM manufacture, it is suggested to establish quality control engineering for CM manufacturing by integrating pharmaceutical analysis, TCM chemistry, TCM pharmacology, pharmaceutical engineering, control engineering, management engineering and other disciplines. Further, a theoretical model of quality control engineering for CM manufacturing and the methodology of digital pharmaceutical engineering are proposed. A technology pathway for promoting CM standard and realizing the strategic goal of CM internationalization is

  11. [The technological innovation strategy for quality control of Chinese medicine based on Big Data].

    Science.gov (United States)

    Li, Zhen-hao; Qian, Zhong-zhi; Cheng, Yi-yu

    2015-09-01

    The evolution of the quality control concepts of medical products within the global context and the development of the quality control technology of Chinese medicine are briefly described. Aimed at the bottlenecks in the regulation and quality control of Chinese medicine, using Big Data technology to address the significant challenges in Chinese medicine industry is proposed. For quality standard refinements and internationalization of Chinese medicine, a technological innovation strategy encompassing its methodology, and the R&D direction of the subsequent core technology are also presented.

  12. Mercury Information Clearinghouse. Quarterly 3: advanced and developmental mercury control technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Advanced mercury control technologies for coal-fired electric utilities are reviewed. The technologies evaluated are at various stages of development and most have been tested under limited operational conditions. The following technologies are described: K-Fuel and K-Fuel Plus pre-combustion technology, combustion modification and in situ generation of sorbents, new sorbent developments, direct bromine injection, MerCAP{sup {trademark}} (Mercury Control via Adsorption Process, Gore felt filter bag inserts, EnviroScrub Pahlman{sup {trademark}} process, combined oxidation of NO{sub x} and mercury, and mercury control with the Advanced Hybrid{trademark} filter. 36 refs., 1 fig.

  13. 40 CFR 63.1322 - Batch process vents-reference control technology.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Batch process vents-reference control technology. 63.1322 Section 63.1322 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Batch process vents—reference control technology. (a) Batch process vents. The owner or operator of a...

  14. 25 CFR 543.16 - What are the minimum internal controls for information technology?

    Science.gov (United States)

    2010-04-01

    ... controls for information technology? (a) Physical security measures restricting access to agents, including... longer required. (2) In the event of remote access, the information technology employees must prepare a... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal controls for information...

  15. Database mirroring in fault-tolerant continuous technological process control

    Directory of Open Access Journals (Sweden)

    R. Danel

    2015-10-01

    Full Text Available This paper describes the implementations of mirroring technology of the selected database systems – Microsoft SQL Server, MySQL and Caché. By simulating critical failures the systems behavior and their resilience against failure were tested. The aim was to determine whether the database mirroring is suitable to use in continuous metallurgical processes for ensuring the fault-tolerant solution at affordable cost. The present day database systems are characterized by high robustness and are resistant to sudden system failure. Database mirroring technologies are reliable and even low-budget projects can be provided with a decent fault-tolerant solution. The database system technologies available for low-budget projects are not suitable for use in real-time systems.

  16. Recent flow regime and sedimentological evolution of a fluvial system as the main factors controlling spatial distribution of arsenic in groundwater (Red River, Vietnam)

    DEFF Research Database (Denmark)

    Kazmierczak, J.; Larsen, F.; Jakobsen, R.

    2016-01-01

    sediments was partially eroded during the Holocene and covered by sand and clay deposited in fluvial environments. Sedimentary processes lead to the development of two flow systems. Shallow groundwater discharges either to the local surface water bodies or, in the areas where low permeable sediments...... isolating Pleistocene and Holocene aquifers were eroded, to the deep groundwater flow system discharging to Red River. Previously reported pattern of arsenic groundwater concentrations decreasing with an increasing sediment age is modified by the observed flow regime. Connection of the younger and older...

  17. Soft System Analysis to Integrate Technology & Human in Controller Workstation

    Science.gov (United States)

    2011-10-16

    Computer-based decision support tools (DST), : shared information, and other forms of automation : are increasingly being planned for use by controllers : and pilots to support Air Traffic Management (ATM) : and Air Traffic Control (ATC) in the Next ...

  18. Multiphase Flow Technology Impacts on Thermal Control Systems for Exploration

    Science.gov (United States)

    McQuillen, John; Sankovic, John; Lekan, Jack

    2006-01-01

    The Two-Phase Flow Facility (TPHIFFy) Project focused on bridging the critical knowledge gap by developing and demonstrating critical multiphase fluid products for advanced life support, thermal management and power conversion systems that are required to enable the Vision for Space Exploration. Safety and reliability of future systems will be enhanced by addressing critical microgravity fluid physics issues associated with flow boiling, condensation, phase separation, and system stability. The project included concept development, normal gravity testing, and reduced gravity aircraft flight campaigns, in preparation for the development of a space flight experiment implementation. Data will be utilized to develop predictive models that could be used for system design and operation. A single fluid, two-phase closed thermodynamic loop test bed was designed, assembled and tested. The major components in this test bed include: a boiler, a condenser, a phase separator and a circulating pump. The test loop was instrumented with flow meters, thermocouples, pressure transducers and both high speed and normal speed video cameras. A low boiling point surrogate fluid, FC-72, was selected based on scaling analyses using preliminary designs for operational systems. Preliminary results are presented which include flow regime transitions and some observations regarding system stability.

  19. Examining the Relative Influence of Risk and Control on Intention to Adopt Risky Technologies

    Directory of Open Access Journals (Sweden)

    Sumeet Gupta

    2010-12-01

    Full Text Available For technologies such as electronic commerce, mobile payments, internet and mobile banking etc. customers are concerned about security issues that arise as a result of adoption of these technologies. However, in practice, we find that customers forgo their considerations of risk in the technology, if the benefits of using the technology overpower the risks involved in using the technology. Understanding their relative roles in technology adoption will help technology developers focus their efforts on either of them to improve technology adoption. Results of this study reveal that in adopting a technology, customers are guided more by the perception of control rather than by the perception of risk. Implications for theory and practice are discussed.

  20. Critical Technology Assessment of Five Axis Simultaneous Control Machine Tools

    Science.gov (United States)

    2009-07-01

    parts for defense-related components, of the risk of unauthorized access to and exfiltration of CNC data. 2 II. Introduction A...control through the use of a computerized numerical controller ( CNC ). The CNC is a dedicated computer that controls the movement of the axes of the

  1. Application of Model-Checking Technology to Controller Synthesis

    DEFF Research Database (Denmark)

    David, Alexandre; Grunnet, Jacob Deleuran; Jessen, Jan Jacob

    2011-01-01

    In this paper we present two frameworks that have been implemented to link traditional model-checking techniques to the domain of control. The techniques are based on solving a timed game and using the resulting solution (a strategy) as a controller. The obtained discrete controller must fit with...

  2. MODELING COMBINING TAX REGIMES

    Directory of Open Access Journals (Sweden)

    Prishchenko E. A.

    2016-03-01

    Full Text Available The article discusses the combination of tax regimes as a result of separation from the operating business of the revenues and costs for system of a united tax on imputed income (UTII with the analysis of the tax consequences of such allocation. Three models of taxation were built: both variants of the simplified system of taxation from UTII and common system of taxation with UTII. We propose a rapid method of the most preferred system of taxation for small businesses’ selection depending material to labor costs ratio. All these results could be implemented in the case when the company starts a new type of activity under the rules UTII, and solves the problem in the framework of the tax regime to conduct this activity - UTII applied or not, based on the criterion of tax savings. Using the relations describing the tax burden when combined tax regimes, we can determine what the yield should have a new business line and what cost structure should it have to reduce the tax burden. The main result is proposed approach that can be used as a tool of tax planning activities of small businesses.

  3. Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

    Energy Technology Data Exchange (ETDEWEB)

    Moore, E.B.

    1984-10-01

    The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables.

  4. Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

    International Nuclear Information System (INIS)

    Moore, E.B.

    1984-10-01

    The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables

  5. A comparative study on export control systems of nuclear technology in ROK and USA

    International Nuclear Information System (INIS)

    Tae, Jae Woong; Shin, Dong Hoon

    2013-01-01

    Perfect removal of transferred technology is impossible because it is impossible to find all copies of technologies such as files and documents. International community concerns about Terrorists' acquirement of nuclear technologies related to nuclear reactors, enrichment and reprocessing Facilities and heavy water production facilities, which can be used for production of nuclear weapons. Non-state actors as well as concerning countries have tried to possess nuclear technology for developing nuclear weapons. Non-state actors' activities threaten global nuclear security. Korea exported four nuclear power plants to UAE and a research reactor to Jordan. Non-state actors may try to procure nuclear equipment and technology from Korean nuclear industries. Therefore, the export control system should be enhanced for national nuclear security and safety. In this study, the export control system of Korea and the United States were compared concerning to nuclear technology. In summary, controlled activities related to nuclear technology are treated more variously and more diverse activities are controlled in the United States than In Korea. Catch-all control will lose its effectiveness without this. Related to the control of ITT (Intangible Technology Transfer), Korea and the United States are trying to amend the export control regulation. Both of them are trying to control intangible technology transfers effectively. Revised Foreign Trade Act in Korea is expected to introduce a more rigorous system of nuclear technology controls. It focuses on nationality rather than residence. The revised law may face into other problems such as dual nationals like as the United States. However, this satisfies legislative requirements for control of a deemed export. The revised law will enter into force in 2014. Accurate meanings of technology and export will be defined soon in the enforcement decree and the public notice before 2014. However, it is hard to revise the definition of export

  6. A New Architecture for Visualization: Open Mission Control Technologies

    Science.gov (United States)

    Trimble, Jay

    2017-01-01

    Open Mission Control Technologies (MCT) is a new architecture for visualisation of mission data. Driven by requirements for new mission capabilities, including distributed mission operations, access to data anywhere, customization by users, synthesis of multiple data sources, and flexibility for multi-mission adaptation, Open MCT provides users with an integrated customizable environment. Developed at NASAs Ames Research Center (ARC), in collaboration with NASAs Advanced Multimission Operations System (AMMOS) and NASAs Jet Propulsion Laboratory (JPL), Open MCT is getting its first mission use on the Jason 3 Mission, and is also available in the testbed for the Mars 2020 Rover and for development use for NASAs Resource Prospector Lunar Rover. The open source nature of the project provides for use outside of space missions, including open source contributions from a community of users. The defining features of Open MCT for mission users are data integration, end user composition and multiple views. Data integration provides access to mission data across domains in one place, making data such as activities, timelines, telemetry, imagery, event timers and procedures available in one place, without application switching. End user composition provides users with layouts, which act as a canvas to assemble visualisations. Multiple views provide the capability to view the same data in different ways, with live switching of data views in place. Open MCT is browser based, and works on the desktop as well as tablets and phones, providing access to data anywhere. An early use case for mobile data access took place on the Resource Prospector (RP) Mission Distributed Operations Test, in which rover engineers in the field were able to view telemetry on their phones. We envision this capability providing decision support to on console operators from off duty personnel. The plug-in architecture also allows for adaptation for different mission capabilities. Different data types and

  7. Expert system technology for control integration in nuclear reactors

    International Nuclear Information System (INIS)

    Stabler, E.P. Jr.; Zimmerman, J.J.; Stratton, R.C.

    1986-03-01

    This report describes the role of expert system technology in nuclear power plant operation. The use of computers to assist operator decisions would greatly enhance the safety and efficiency of operation. A description of the necessary operator interfaces, data acquisition and validation, plant status and parameter diagnosis, and system reliability is presented. (FL)

  8. Management and Control of Domestic Smart Grid Technology

    NARCIS (Netherlands)

    Molderink, Albert; Bakker, Vincent; Bosman, M.G.C.; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    Emerging new technologies like distributed generation, distributed storage, and demand-side load management will change the way we consume and produce energy. These techniques enable the possibility to reduce the greenhouse effect and improve grid stability by optimizing energy streams. By smartly

  9. Hand controllers for teleoperation. A state-of-the-art technology survey and evaluation

    Science.gov (United States)

    Brooks, T. L.; Bejczy, A. K.

    1985-01-01

    Hand controller technology for teleoperation is surveyed in three major catagories: (1) hand grip design, (2) control input devices, and (3) control strategies. In the first category, 14 hand grip designs are reviewed and evaluated in light of human factor considerations. In the second, 12 hand controller input devices are evaluated in terms of task performance, configuration and force feedback, controller/slave correspondence, operating volume, operator workload, human limitations, cross coupling, singularities, anthropomorphic characteristics, physical complexity, control/display interference, accuracy, technological base, cost, and reliability. In the third catagory, control strategies, commonly called control modes, are surveyed and evaluated. The report contains a bibliography with 189 select references on hand controller technology.

  10. Test-bed Assessment of Communication Technologies for a Power-Balancing Controller

    DEFF Research Database (Denmark)

    Findrik, Mislav; Pedersen, Rasmus; Hasenleithner, Eduard

    2016-01-01

    and control. In this paper, we present a Smart Grid test-bed that integrates various communication technologies and deploys a power balancing controller for LV grids. Control performance of the introduced power balancing controller is subsequently investigated and its robustness to communication network cross...

  11. Mercury Information Clearinghouse. Quarterly 1: sorbent injection technologies for mercury control

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Sorbent injection technologies for mercury control in coal-fired power plants and, in particular, the injection of activated carbon sorbents are examined. The retrofit technology that has been demonstrated to have the widest application for the control of mercury in plants without flue gas desulphurization scrubbers is discussed. The report covers mercury control requirements, laboratory studies on factors that affect sorbent capacity, pilot scale tests of the capture performance of different coals, research on sorbent properties, and full scale demonstration of sorbent control technologies. 34 refs., 3 figs., 4 tabs.

  12. High Performance Low Cost Digitally Controlled Power Conversion Technology

    DEFF Research Database (Denmark)

    Jakobsen, Lars Tønnes

    2008-01-01

    Digital control of switch-mode power supplies and converters has within the last decade evolved from being an academic subject to an emerging market in the power electronics industry. This development has been pushed mainly by the computer industry that is looking towards digital power management...... the execution time of the software algorithm that realises the digital control law will constitute a considerable delay in the control loop. Digital signal controllers are powerful devices capable of performing arithmetic functions much faster than a microcontroller can. Digital signal controllers are well...... and an analogue to digital converter with a short sampling time. A digital self-oscillating modulator is proposed in the present thesis. The modulator is a free-running modulator which operates without an external carrier signal. Customised digital control solutions offers the best performance for non-isolated DC...

  13. Modern control technology for improved nuclear reactor performance

    International Nuclear Information System (INIS)

    Oakes, L.C.

    1986-01-01

    One of the main complaints leveled at reactor control systems by utility spokesmen is complexity. One only has to look inside a power reactor control room to appreciate this viewpoint. The high reliability and versatility of modern microprocessors makes possible distributed control systems with only performance data and abnormal conditions being relayed to the control room. In a sense, this emulates the human-body control system where routine repetitive actions are handled in an involuntary manner. The significance of expert systems to the nuclear reactor control and safety systems is their ability to capture human and other expertise and make it available, upon demand, and under almost all circumstances. Thus, human problem-solving skills acquired by the learning process over a long period of time can be captured and employed with the reliability inherent in computers. This is especially important in nuclear plants when human operators are burdened by stress and emotional factors that have a dramatic effect on performance level

  14. An adaptive sliding mode control technology for weld seam tracking

    Science.gov (United States)

    Liu, Jie; Hu, Youmin; Wu, Bo; Zhou, Kaibo; Ge, Mingfeng

    2015-03-01

    A novel adaptive sliding mode control algorithm is derived to deal with seam tracking control problem of welding robotic manipulator, during the process of large-scale structure component welding. The proposed algorithm does not require the precise dynamic model, and is more practical. Its robustness is verified by the Lyapunov stability theory. The analytical results show that the proposed algorithm enables better high-precision tracking performance with chattering-free than traditional sliding mode control algorithm under various disturbances.

  15. Microscopic Control Delay Modeling at Signalized Arterials Using Bluetooth Technology

    OpenAIRE

    Rajasekhar, Lakshmi

    2011-01-01

    Real-time control delay estimation is an important performance measure for any intersection to improve the signal timing plans dynamically in real-time and hence improve the overall system performance. Control delay estimates helps to determine the level-of-service (LOS) characteristics of various approaches at an intersection and takes into account deceleration delay, stopped delay and acceleration delay. All kinds of traffic delay calculation especially control delay calculation has always ...

  16. Military Technology and Conventional Weapons Export Controls: The Wassenaar Arrangement

    National Research Council Canada - National Science Library

    Grimmett, Richard F

    2006-01-01

    This report provides background on the Wassenaar Arrangement, which was formally established in July 1996 as a multilateral arrangement aimed at controlling exports of conventional weapons and related...

  17. Technology to enhance vegetable quality by the light environment control

    International Nuclear Information System (INIS)

    Higashio, H.

    2004-01-01

    Recent research information about the physiological function of the ultraviolet (UV) rays on plants, and in particular the technology to enhance vegetable quality with UV which we are studying at present are introduced. 1. UV rays have various physiological effects on plants, and the effect differs depending on wavelength. Flavonoid is thought to be one of the materials protecting against the UV rays. Some inductive mechanisms of flavonoid production in plant upon exposure to the UV rays are revealed, but optical receptors have not been found yet. 2. The UV rays influence the production of vitamins and flavonoid compounds such as anthocyanin and quercetin. UV rays irradiation technology is being developed as one of the means to increase levels of these compounds and so produce high quality vegetables

  18. Experience in verification regimes. United States On-Site Inspection Agency

    International Nuclear Information System (INIS)

    Reppert, J.

    1998-01-01

    Experiences are described of the United States On-site Inspection Agency in verification regimes all over the world where it has been applied in the last 30 years. The challenge for the future is to extend the benefits of the applied tools to all states in all regions to enhance stability and to create conditions for peace at lower levels of armaments than currently exist. The USA need to engage states currently caught in cycles of violence and arms escalation. They must examine technologies which together with on-site aspects of verification or transparency regimes can provide a comprehensive picture at affordable costs. They foresee a growth in combined training with new states entering for the first time into regime that include arms control and transparency measure

  19. The edible gelatin irradiation sterilization technology and quality control

    International Nuclear Information System (INIS)

    Fu Junjie; Shi Jianjun; Shen Weiqiao

    2000-01-01

    60 Co γ-ray irradiation sterilization technology was used in treating edible gelatin and the irradiation effects on viscosity, protein and amino acid were studied. The results demonstrated that the irradiation dose had negative correlation with viscosity, and there were no damage effects on the gelatin with 360 days storage under room temperature. According to D 10 Value, the suitable irradiation dose should be 3-5 kGy

  20. Unitary Housing Regimes in Transition

    DEFF Research Database (Denmark)

    Bengtsson, Bo; Jensen, Lotte

    2013-01-01

    Path dependence is strong in housing institutions and policy. In both Denmark and Sweden, today’s universal and ‘unitary’ (Kemeny) housing regimes can be traced back to institutions that were introduced fifty years back in history or more. Recently, universal and unitary housing systems...... in Scandinavia, and elsewhere, are under challenge from strong political and economic forces. These challenges can be summarized as economic cutbacks, privatization and Europeanization. Although both the Danish and the Swedish housing system are universal and unitary in character, they differ considerably...... in institutional detail. Both systems have corporatist features, however in Denmark public housing is based on local tenant democracy and control, and in Sweden on companies owned and controlled by the municipalities, combined with a centralized system of rent negotiations. In the paper the present challenges...

  1. Effect of peripheral vision control technology in the development of juvenile myopia

    OpenAIRE

    Jin-Ou Huang; Xiao-Hong Wei; undefined

    2015-01-01

    AIM:To investigate the effect of peripheral vision control technology for delaying the development of juvenile myopia.METHODS: A total of ninty-nine cases of 12~18 year-old myopic patients were randomly divided into two groups. The experimental group was peripheral vision control technology group whose members wore the special lenses which can help correct the hypermetropic defocus of peripheral retina. The other was control group whose members wore ordinary monofocal lenses. All the subjects...

  2. Updated Meta-Analysis of Learner Control within Educational Technology

    Science.gov (United States)

    Karich, Abbey C.; Burns, Matthew K.; Maki, Kathrin E.

    2014-01-01

    Giving a student control over their learning has theoretical and intuitive appeal, but its effects are neither powerful nor consistent in the empirical literature base. This meta-analysis updated previous meta-analytic research by Niemiec, Sikorski, and Walberg by studying the overall effectiveness of providing learner control within educational…

  3. Flexible spacecraft dynamics, control and guidance technologies by giovanni campolo

    CERN Document Server

    Mazzini, Leonardo

    2016-01-01

    This book is an up-to-date compendium on spacecraft attitude and orbit control (AOC) that offers a systematic and complete treatment of the subject with the aim of imparting the theoretical and practical knowledge that is required by designers, engineers, and researchers. After an introduction on the kinematics of the flexible and agile space vehicles, the modern architecture and functions of an AOC system are described and the main AOC modes reviewed with possible design solutions and examples. The dynamics of the flexible body in space are then considered using an original Lagrangian approach suitable for the control applications of large space flexible structures. Subsequent chapters address optimal control theory, attitude control methods, and orbit control applications, including the optimal orbital transfer with finite and infinite thrust. The theory is integrated with a description of current propulsion systems, with the focus especially on the new electric propulsion systems and state of the art senso...

  4. Developing Effluent Analysis Technologies to Support Nonproliferation Initiatives, Arms Control and Nonproliferation Technologies, Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, S A; Staehle, G; Alonzo, G M [eds.

    1995-01-01

    This issue provides an overview of the Effluent Research Program of the DOE Office of Research and Development, highlighting a number of representative projects within this program in support of nonproliferation initiatives. Technologies reported include portable instruments for on-site inspections, standoff detectors, fieldable, real-time instruments, field collection techniques, and ultrasensitive laboratory techniques.

  5. Snowpack redistribution, vegetation feedbacks, and advective heat transport controls on ground thermal regimes and hydrologic response in zero-order hillslope drainage features

    Science.gov (United States)

    Rushlow, C. R.; Godsey, S.; Sawyer, A. H.

    2017-12-01

    The impact of intensification of the Arctic hydrologic cycle depends on regional and local changes in precipitation, evaporation, and ground thaw. Upland Arctic hillslope hydrology may differ from responses in other Arctic systems because of changes in hydrologic connectivity and ground thermal response to warming. Here we examine hydrologic and ground thermal patterns from six zero-order hillslope features called water tracks on Alaska's North Slope. We find that water tracks' hydrologic response is slower than that of nearby streams and rivers, suggesting that water tracks are responsible for the prolonged summer flood response in larger water bodies rather than the immediate post-storm response as previously expected. We also compare non-water track hillslope and water track ground thermal regimes, and in contrast to water tracks in the High Arctic, we find that the upland water tracks thaw more deeply than non-track hillslope, and remain thawed for up to two months longer than hillslope soils in the winter. Finally, we use the multi-phase model SUTRA-ICE to examine the relative roles of varying winter snowpack thickness, vegetation feedbacks on ground thermal characteristics, and advective heat transport on the observed ground thermal regimes. Wind redistributes snow from non-track hillslopes into water tracks because of slight topographic depressions and differences in vegetation characteristics in the water tracks. These deeper snowpacks can better insulate the ground from cold winter air temperatures. Past work has suggested that advective heat transport in Arctic systems is minimal because of low hydraulic conductivity below a shallow organic soil horizon. However, we explore whether the persistence of flows for weeks or months longer in water tracks than non-track hillslopes may lead to significant advective heat transport in these systems.

  6. COFS 1: Beam dynamics and control technology overview

    Science.gov (United States)

    Allen, John L.

    1986-11-01

    The Control of Flexible Structures (COFS) 1 Project provides the invaluable opportunity to test, validate, and measure the effectiveness of theories, structural concepts, control systems, and flight certification processes for future missions through a research program focusing on multiple issues in large flexible structures, dynamics, and controls. The COFS 1 Project consists of a series of ground and flight activities building progressively from modeling and dynamic characterization of large space systems to the more complex issues of flexible-body control. The program objectives are to: determine the degree to which theory and ground testing can predict flight performance of next-generation low-frequency structures; evaluate structural fidelity of representative next-generation large deployable precision structure; assess math modeling requirements for large lightweight complex systems on which ground test results are questionable; determine degree to which scale model analysis and tests can be correlated to full-scale performance; evaluate system identification and state estimation algorithms on complex lightweight structures in the space environment; evaluate and verify controls/structures modeling capability; evaluate control laws and control systems; and evaluate damping effects in micro-g environment.

  7. Arms Control and nonproliferation technologies: Technology options and associated measures for monitoring a Comprehensive Test Ban, Second quarter

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Leslie A.

    1994-01-01

    This newsletter contains reprinted papers discussing technology options and associated measures for monitoring a Comprehensive Test Ban Treaty (CTBT). These papers were presented to the Conference on Disarmament (CD) in May and June 1994. An interagency Verification Monitoring Task Force developed the papers. The task force included participants from the Arms Control and Disarmament Agency, the Department of Defense, the Department of Energy, the Intelligence Community, the Department of Interior, and the Department of State. The purpose of this edition of Arms Control and Nonproliferation Technologies is to share these papers with the broad base of stakeholders in a CTBT and to facilitate future technology discussions. The papers in the first group discuss possible technology options for monitoring a CTBT in all environments (underground, underwater, atmosphere, and space). These technologies, along with on-site inspections, would facilitate CTBT monitoring by treaty participants. The papers in the second group present possible associated measures, e.g., information exchanges and transparency measures, that would build confidence among states participating in a CTBT.

  8. Technology status report: Transuranic contamination control at INEL

    International Nuclear Information System (INIS)

    Loomis, G.G.

    1991-09-01

    This report summarizes proposed FY-92 work at the Idaho National Engineering Laboratory (INEL) in the field of contamination control during transuranic waste handling operations. The proposed work is both applied research and demonstration testing. The INEL needs for contamination control applied research and demonstration testing are listed along with a description of past accomplishments. The INEL proposal is compared to other proposals for contamination control work that are under consideration for funding by the Department of Energy. Benefits of this work and impacts of not sponsoring this work are also given. 21 refs

  9. New Flight Control Technologies for Future Naval Aircraft.

    Science.gov (United States)

    1982-09-01

    normally share control of actuator position, while the third EHSV , SV3, is held in standby. Note that flows from SV1 and SV2 flow to the larger piston, and...and Vertical Canard Control Surfaces S69 NADC-82240-60 ccc 0 IfIc 4Y L l r - - - - - - - - - - - - -- 00L Ldd cm0 uC Go~ 70. NADC-82240-60 * EHSV ... EHSV SV3. A first failure of SV3 will lock the ISA on SV1 and SV2 control . . Hydraulic system failure correction is given precedence over all EHSV

  10. Technologies for Fire and Damage Control and Condition Based Maintenance

    Science.gov (United States)

    2011-12-01

    2011 © Sa Majesté la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2011 DRDC Atlantic TM 2011-196 i...Prototype » (CDP- VSS) combine plusieurs capteurs multiples avec des fonctions embarquées de prétraitement et hors dispositif de fusion de données...substantially. Résumé …..... Le présent document est le rapport final du projet 11gy intitulé « Technologies de lutte contre les incendies et les

  11. Review of design technology of control rod position indicators

    International Nuclear Information System (INIS)

    Yu, Je Yong; Huh, Hyung; Kim, Ji Ho; Kim, Jong In; Chang, Moon Hee

    1999-10-01

    An integral reactor SMART is under development at KAERI. The design characteristics of SMART are radically different from those employer in currently operating loop type water reactors in Korea. The objective of this report is to review the design technology of position indicator, and to study the various sensors which can be used in rod position indicator. Design criteria that rod position indicator should satisfy are also examined. Following position indicators are reviewed in this report. 1. Digital positioning indicator (DRPI), 2. Reed switch type position indicator (RSPT), 3. Choke sensor type position indicator, 4. Ultrasonic sensor type position indicator, 5. Comparison of each position indicator. (author)

  12. Surface chemistry: Key to control and advance myriad technologies

    Science.gov (United States)

    Yates, John T.; Campbell, Charles T.

    2011-01-01

    This special issue on surface chemistry is introduced with a brief history of the field, a summary of the importance of surface chemistry in technological applications, a brief overview of some of the most important recent developments in this field, and a look forward to some of its most exciting future directions. This collection of invited articles is intended to provide a snapshot of current developments in the field, exemplify the state of the art in fundamental research in surface chemistry, and highlight some possibilities in the future. Here, we show how those articles fit together in the bigger picture of this field. PMID:21245359

  13. Microcontroller Based Home Security and Load Controlling Using Gsm Technology

    OpenAIRE

    Mustafijur Rahman; A.H.M Zadidul Karim; Sultanur Nyeem; Faisal Khan; Golam Matin

    2015-01-01

    "Home automation" referred to as 'Intelligent home' or 'automated home', indicates the automation of daily tasks with electrical devices used in homes. This could be the control of lights or more complex chores such as remote viewing of the house interiors for surveillance purposes. The emerging concept of smart homes offers a comfortable, convenient and safe and secure environment for occupants. These include automatic load controlling, fire detection, temperature sensing, and motion detecti...

  14. Leap Motion controller application in augmented reality technology

    OpenAIRE

    Artemčiukas, Edgaras; Sakalauskas, Leonidas

    2014-01-01

    In this work the analysis of interaction techniques, devices and its’ possibilities were accomplished. It was determined that the problem, which many researchers tries to solve – more natural interaction between users and computers. Interaction system in augmented reality environment using Leap Motion controller was developed. To achieve this goal augmented reality NyARToolkit and Leap Motion controller libraries were used. Solution ensures extensive information about hand, finger...

  15. Application of Intelligent Measurement and Control Technology in Grain Storage

    Directory of Open Access Journals (Sweden)

    Xiaoai Zhang

    2014-05-01

    Full Text Available It’s of strategic importance that China takes the grain as the reserve material. The final quality of the grain is directly related to its storage process. Proper storage measures and methods can extend the shelf life of the grain. In the process of grain storage, the technical indicators, such as temperature and humidity of the stored grain, indoor temperature and air humidity, should be strictly controlled. The intelligent network-based measurement and control system composed by the PCI bus- based intelligent network interface card, the measurement nodes with the neuron chip as the core and LON bus is used to perform real-time measurement on various condition parameters of the grain bin, and transmit the measurement results to the server over the network for controlling and regulating the device after the server processes the results to ensure the safety of grain storage.

  16. Coal-fueled diesel technology development Emissions Control

    Energy Technology Data Exchange (ETDEWEB)

    Van Kleunen, W.; Kaldor, S.; Gal, E.; Mengel, M.; Arnold, M.

    1994-01-01

    GEESI Emissions Control program activity ranged from control concept testing of 10 CFM slipstream from a CWS fuel single cylinder research diesel engine to the design, installation, and operation of a full-size Emissions Control system for a full-size CWS fuel diesel engine designed for locomotive operation.Early 10 CFM slipstream testing program activity was performed to determine Emissions Characteristics and to evaluate Emissions Control concepts such a Barrier filtration, Granular bed filtration, and Cyclone particulate collection for reduction of particulate and gaseous emissions. Use of sorbent injection into the engine exhaust gas upstream of the barrier filter or use of sorbent media in the granular bed filter were found to provide reduction of exhaust gas SO{sub 2} and NO{sub x} in addition to collection of ash particulate. Emergence of the use of barrier filtration as a most practical Emissions Control concept disclosed a need to improve cleanability of the filter media in order to avoid reduction of turbocharger performance by excessive barrier filter pressure drop. The next progression of program activity, after the slipstream feasibility state, was 500 CFM cold flow testing of control system concepts. The successful completion of 500 CFM cold flow testing of the Envelope Filter led to a subsequent progression to a similar configuration Envelope Filter designed to operate at 500 CFM hot gas flow from the CWS fuel research diesel engine in the GETS engine test laboratory. This Envelope Filter included the design aspect proven by cold flow testing as well as optimization of the selection of the installed filter media.

  17. The impact of new computer technology on accelerator control

    International Nuclear Information System (INIS)

    Theil, E.; Jacobson, V.; Paxson, V.

    1987-04-01

    This paper describes some recent developments in computing and stresses their application in accelerator control systems. Among the advances that promise to have a significant impact are (1) low cost scientific workstations; (2) the use of ''windows'', pointing devices and menus in a multi-tasking operating system; (3) high resolution large-screen graphics monitors; (4) new kinds of high bandwidth local area networks. The relevant features are related to a general accelerator control system. For example, this paper examines the implications of a computing environment which permits and encourages graphical manipulation of system components, rather than traditional access through the writing of programs or ''canned'' access via touch panels

  18. GAS FLOW CONTROL SYSTEM IN REACTIVE MAGNETRON SPUTTERING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    I. M. Klimovich

    2015-01-01

    Full Text Available  It is known that the discharge parameters and the chemical composition of the particles flux impinging onto the substrate during a reactive magnetron sputtering are unstable. As a result spontaneous transitions between the «metal» mode of the target surface and the «poisoned» mode of the target surface have been observed. This leads to nonrepeatability of the coating compositions from process to process. The aim of this work is to design a gas flow control system for reactive sputtering processes. The control system allows to maintain a steady nonequilibrium state of the magnetron discharge in transition mode where the chemical state of the target surface is unstable. The intensities of spectral lines of the discharge spectrum are proposed as control parameters. Photodiode detectors were used for registration of intensities of spectral lines. A gas flow control system regulates argon and reactive gas flow automatically, using feedback signals from photodiode detectors on the intensities of the spectral lines, vacuum gauge, ion current sensor, sensors of discharge current and voltage. As an example, the process of reactive magnetron Ti-Al-N deposition is considered. The following discharge parameters are controlled during sputtering a composite target based on Ti with Al cylindrical inserts: current, voltage, total pressure of a gas mixture, substrate temperature, bias voltage and current of the substrate. Nitrogen flow was controlled by the spectral line intensity of titanium TiI 506,5 nm. The value of the line intensity is connected with the value of reactivity. Elemental composition and structure of the Ti-Al-N coatings were studied using Rutherford backscattering spectroscopy, scanning electron microscopy and X-ray diffraction. It was found, that stoichiometric Ti-Al-N coatings have a globular structure, enhanced hardness and low friction coefficient in contrast to Ti-Al-N coatings with nonstoichiometric composition, which have a

  19. The impact of new computer technology on accelerator control

    International Nuclear Information System (INIS)

    Theil, E.; Jacobson, V.; Paxson, V.

    1987-01-01

    This paper describes some recent developments in computing and stresses their application to accelerator control systems. Among the advances that promise to have a significant impact are: i) low cost scientific workstations; ii) the use of ''windows'', pointing devices and menus in a multitasking operating system; iii) high resolution large-screen graphics monitors; iv) new kinds of high bandwidth local area networks. The relevant features are related to a general accelerator control system. For example, the authors examine the implications of a computing environment which permits and encourages graphical manipulation of system components, rather than traditional access through the writing of programs or ''canned'' access via touch panels

  20. Arms control and nonproliferation technologies. First quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Staehle, G; Alonzo, G M; Sanford, N M [eds.

    1995-01-01

    This first quarter issue for 1995 highlights the Small Business Innovation Research (SBIR) program. The SBIR program is managed by the DOE`s Basic Energy Sciences program within the Office of Energy Research. Each year, the SBIR program solicits research ideas of interest to the DOE. Articles contained in this issue include: The Small Business Innovation Research Program supported by the Office of Nonproliferation and National Security; Automated cueing to man-made objects via multispectral image; Security systems get smart with advanced processing and thermal imaging; A breakthrough in cooling system technology; The APSTNG neutron probe; Lithium-doped fullerene neutron detector; Miniature GC-MS for on-site chemical analysis; and Winner of Sandia President`s Quality Award.

  1. New technologies in predicting, preventing and controlling emerging infectious diseases.

    Science.gov (United States)

    Christaki, Eirini

    2015-01-01

    Surveillance of emerging infectious diseases is vital for the early identification of public health threats. Emergence of novel infections is linked to human factors such as population density, travel and trade and ecological factors like climate change and agricultural practices. A wealth of new technologies is becoming increasingly available for the rapid molecular identification of pathogens but also for the more accurate monitoring of infectious disease activity. Web-based surveillance tools and epidemic intelligence methods, used by all major public health institutions, are intended to facilitate risk assessment and timely outbreak detection. In this review, we present new methods for regional and global infectious disease surveillance and advances in epidemic modeling aimed to predict and prevent future infectious diseases threats.

  2. Risk reduction based on controlling technologies on industrial enterprises

    Directory of Open Access Journals (Sweden)

    Khudyakova T.A.

    2017-01-01

    Full Text Available During the global economic instability, demand in developing toolkit which helps to mitigate the negative impact of environmental factors on efficiency of activity of the enterprise is increasing dramatically. However, in practice implementation of any of the tools causes the growth of additional costs, which, for purposes of effective functioning of mini-economic system must be covered by the profit’s increase from the introduction of this toolkit. The task’s implementation was achieved by processing a significant amount of scientific and statistical literature and calculation of integral indicators of the effectiveness of controlling system’s implementation at the enterprises. The analysis revealed a positive effect of the implementation of controlling system on the quality of decisions, efficiency of management, productivity, investment attractiveness, effectiveness of workflow and financial stability, and calculated the average integral efficiency indicators. The obtained results allow to make an unambiguous conclusion about the effectiveness of the controlling system’s implementing, which is especially important during the period of economic globalization and the growth of perturbations in the external environment, the efficiency reserves identified in the operation of the controlling system can and should be a certain buffer to reduce the negative impact of external factors on the sustainability of the enterprise.

  3. Non-destructive control: technologies, applications and markets

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    A description of NDC - nondestructive controls - (acoustic emission, Eddy currents, infrared and thermal, liquid penetrants, magnetic particles, radiographic, ultrasonic, visual and optical techniques) is given with various industrial applications and market trends. Some research projects, contacts and a list of NDC systems main manufacturers are given. (A.B.). 37 figs. and tabs

  4. Accounting Control Technology Using SAP: A Case-Based Approach

    Science.gov (United States)

    Ragan, Joseph; Puccio, Christopher; Talisesky, Brandon

    2014-01-01

    The Sarbanes-Oxley Act (SOX) revolutionized the accounting and audit industry. The use of preventative and process controls to evaluate the continuous audit process done via an SAP ERP ECC 6.0 system is key to compliance with SOX and managing costs. This paper can be used in a variety of ways to discuss issues associated with auditing and testing…

  5. Satellite technology and the control of parasitic diseases in Africa ...

    African Journals Online (AJOL)

    The potential application of these techniques in the surveillance, control and prevention of parasitic diseases in Africa is explored in this write-up. Keywords: surveillance, parasitic diseases, satellite techniques, remote sensing, Geographical Information System (GIS), Global Positioning Sytem (GPS), human and robotic, ...

  6. Wearable Device Control Platform Technology for Network Application Development

    Directory of Open Access Journals (Sweden)

    Heejung Kim

    2016-01-01

    Full Text Available Application development platform is the most important environment in IT industry. There are a variety of platforms. Although the native development enables application to optimize, various languages and software development kits need to be acquired according to the device. The coexistence of smart devices and platforms has rendered the native development approach time and cost consuming. Cross-platform development emerged as a response to these issues. These platforms generate applications for multiple devices based on web languages. Nevertheless, development requires additional implementation based on a native language because of the coverage and functions of supported application programming interfaces (APIs. Wearable devices have recently attracted considerable attention. These devices only support Bluetooth-based interdevice communication, thereby making communication and device control impossible beyond a certain range. We propose Network Application Agent (NetApp-Agent in order to overcome issues. NetApp-Agent based on the Cordova is a wearable device control platform for the development of network applications, controls input/output functions of smartphones and wearable/IoT through the Cordova and Native API, and enables device control and information exchange by external users by offering a self-defined API. We confirmed the efficiency of the proposed platform through experiments and a qualitative assessment of its implementation.

  7. Advanced Instrumentation, Information, and Control System Technologies: Nondestructive Examination Technologies - FY11 Report

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M.; Coble, Jamie B.; Ramuhalli, Pradeep; Bond, Leonard J.

    2011-08-30

    Licensees of commercial nuclear power plants in the US are expected to submit license renewal applications for the period of operation of 60 to 80 years which has also been referred to as long term operation (LTO). The greatest challenges to LTO are associated with degradation of passive components as active components are routinely maintained and repaired or placed through maintenance programs. Some passive component degradation concerns include stress corrosion cracking (SCC) of metal components, radiation induced embrittlement of the reactor pressure vessel (RPV), degradation of buried piping, degradation of concrete containment structures, and degradation of cables. Proactive management of passive component aging employs three important elements including online monitoring of degradation, early detection of degradation at precursor stages, and application of prognostics for the prediction of remaining useful life (RUL). This document assesses several nondestructive examination (NDE) measurement technologies for integration into proactive aging management programs. The assessment is performed by discussing the three elements of proactive aging management identified above, considering the current state of the industry with respect to adopting these key elements, and analyzing measurement technologies for monitoring large cracks in metal components, monitoring early degradation at precursor stages, monitoring the degradation of concrete containment structures, and monitoring the degradation of cables. Specific and general needs have been identified through this assessment. General needs identified include the need for environmentally rugged sensors are needed that can operate reliably in an operating reactor environment, the need to identify parameters from precursor monitoring technologies that are unambiguously correlated with the level of pre-macro defect damage, and a methodology for identifying regions where precursor damage is most likely to initiate.

  8. Advanced Instrumentation, Information, and Control System Technologies: Nondestructive Examination Technologies - FY11 Report

    International Nuclear Information System (INIS)

    Meyer, Ryan M.; Coble, Jamie B.; Ramuhalli, Pradeep; Bond, Leonard J.

    2011-01-01

    Licensees of commercial nuclear power plants in the US are expected to submit license renewal applications for the period of operation of 60 to 80 years which has also been referred to as long term operation (LTO). The greatest challenges to LTO are associated with degradation of passive components as active components are routinely maintained and repaired or placed through maintenance programs. Some passive component degradation concerns include stress corrosion cracking (SCC) of metal components, radiation induced embrittlement of the reactor pressure vessel (RPV), degradation of buried piping, degradation of concrete containment structures, and degradation of cables. Proactive management of passive component aging employs three important elements including online monitoring of degradation, early detection of degradation at precursor stages, and application of prognostics for the prediction of remaining useful life (RUL). This document assesses several nondestructive examination (NDE) measurement technologies for integration into proactive aging management programs. The assessment is performed by discussing the three elements of proactive aging management identified above, considering the current state of the industry with respect to adopting these key elements, and analyzing measurement technologies for monitoring large cracks in metal components, monitoring early degradation at precursor stages, monitoring the degradation of concrete containment structures, and monitoring the degradation of cables. Specific and general needs have been identified through this assessment. General needs identified include the need for environmentally rugged sensors are needed that can operate reliably in an operating reactor environment, the need to identify parameters from precursor monitoring technologies that are unambiguously correlated with the level of pre-macro defect damage, and a methodology for identifying regions where precursor damage is most likely to initiate.

  9. An overview of exhaust emissions regulatory requirements and control technology for stationary natural gas engines

    International Nuclear Information System (INIS)

    Ballard, H.N.; Hay, S.C.; Shade, W.N. Jr.

    1992-01-01

    In this paper a practical overview of stationary natural gas engine exhaust emissions control technology and trends in emissions regulatory requirements is presented. Selective and non-selective catalytic reduction and lean burn technologies are compared. Particular emphasis is focussed on implications of the Clean Air Act of 1990. Recent emissions reduction conversion kit developments and a practical approach to continuous monitoring are discussed

  10. Crop based climate regimes for energy saving in greenhouse cultivation

    Energy Technology Data Exchange (ETDEWEB)

    Koerner, O.

    2003-06-16

    Sustainability is one of the major aims in greenhouse horticulture. According to agreements between the Dutch grower association and the government, energy consumption and the use of chemical biocides have to be reduced. More advanced greenhouse technique is being developed to reach the target to decrease the energy efficiency-index by 65% between 1980 and 2010. However, this could also be achieved with existing technology by using more advanced climate regimes. The present thesis aimed at that, through designing and analysing climate regimes while employing existing climate control possibilities. Theoretical temperature and humidity regimes were designed to decrease energy consumption and a photosynthesis maximisation procedure was implemented to maximise growth. The basis for a crop gross photosynthesis model for control purposes was created. Crop photosynthesis models were evaluated at conditions expected to occur with more sustainable climate regimes. It was shown with experimental evidence that theoretical assumptions on the temperature - CO2 effects in a crop that are based on theoretically models scaling up leaf photosynthesis to the crop level are valid and that simplified existing models could be applied up to 28C. With higher temperatures new designs are needed and this can probably be achieved with an improved stomata-resistance model. The well known temperature integration principle was modified with two nested time-frames (24-hour and six days) and a temperature dose-response function. In a year round tomato cultivation, energy consumption was predicted to decrease with up to 9 % compared to regular temperature integration. The potential for energy saving with temperature integration is limited by humidity control when as usual fixed set points are maintained, because it counteracts temperature integration. Vents open at lower temperatures and heating is switched on at higher temperatures than required for optimal effects of temperature integration. A

  11. Venturi/Vortex Scrubber Technology for Controlling/Recycling Chromium Electroplating Emissions

    National Research Council Canada - National Science Library

    Hay, K

    1999-01-01

    ...) above the plating tank. Venturi/Vortex Scrubber Technology (VVST) was designed to control chromium electroplating emissions by collecting the gas bubbles before they burst at the solution's surface...

  12. Human factors phase IV : risk analysis tool for new train control technology

    Science.gov (United States)

    2005-01-01

    This report covers the theoretical development of the safety state model for railroad operations. Using data from a train control technology experiment, experimental application of the model is demonstrated. A stochastic model of system behavior is d...

  13. Life cycle cost assessment and performance evaluation of sediment control technologies.

    Science.gov (United States)

    2015-10-01

    This study was performed for the Georgia Department of Transportation (GDOT) : to better understand the environmental impacts associated with sediment control : technology currently employed on transportation projects. In this study, a review of : cu...

  14. Ella-V and technology usage technology usage in an english language and literacy acquisition validation randomized controlled trial study

    Directory of Open Access Journals (Sweden)

    Roisin P. Corcoran

    2014-12-01

    Full Text Available This paper describes the use of technology to provide virtual professional development (VPD for teachers and to conduct classroom observations in a study of English Language Learner (ELL instruction in grades K–3. The technology applications were part of a cluster randomized control trial (RCT design for a federally funded longitudinal validation study of a particular program, English Language and Literacy Acquisition-Validation, ELLA- V, to determine its degree of impact on English oral language/literacy, reading, and science across 63 randomly assigned urban, suburban, and rural schools (first year of implementation. ELLA-V also examines the impact of bimonthly VPD for treatment teachers compared to comparison group teachers on pedagogical skills, measured by sound observation instruments, and on student achievement, measured by state/national English language/literacy/reading tests and a national science test. This study features extensive technology use via virtual observations, bimonthly VPD, and randomly assigned treatment and control schools with students served in English as second language (ESL instructional time. The study design and methodology are discussed relativeto the specialized uses of technology and issues involving the evaluation of technology’s contribution to the intervention of interest and of the efficient, cost-effective execution of the study.

  15. Using XML and Java Technologies for Astronomical Instrument Control

    Science.gov (United States)

    Ames, Troy; Case, Lynne; Powers, Edward I. (Technical Monitor)

    2001-01-01

    Traditionally, instrument command and control systems have been highly specialized, consisting mostly of custom code that is difficult to develop, maintain, and extend. Such solutions are initially very costly and are inflexible to subsequent engineering change requests, increasing software maintenance costs. Instrument description is too tightly coupled with details of implementation. NASA Goddard Space Flight Center, under the Instrument Remote Control (IRC) project, is developing a general and highly extensible framework that applies to any kind of instrument that can be controlled by a computer. The software architecture combines the platform independent processing capabilities of Java with the power of the Extensible Markup Language (XML), a human readable and machine understandable way to describe structured data. A key aspect of the object-oriented architecture is that the software is driven by an instrument description, written using the Instrument Markup Language (IML), a dialect of XML. IML is used to describe the command sets and command formats of the instrument, communication mechanisms, format of the data coming from the instrument, and characteristics of the graphical user interface to control and monitor the instrument. The IRC framework allows the users to define a data analysis pipeline which converts data coming out of the instrument. The data can be used in visualizations in order for the user to assess the data in real-time, if necessary. The data analysis pipeline algorithms can be supplied by the user in a variety of forms or programming languages. Although the current integration effort is targeted for the High-resolution Airborne Wideband Camera (HAWC) and the Submillimeter and Far Infrared Experiment (SAFIRE), first-light instruments of the Stratospheric Observatory for Infrared Astronomy (SOFIA), the framework is designed to be generic and extensible so that it can be applied to any instrument. Plans are underway to test the framework

  16. Control of mercury emissions: policies, technologies, and future trends

    OpenAIRE

    Rhee, Seung-Whee

    2015-01-01

    Seung-Whee Rhee Department of Environmental Engineering, Kyonggi University, Suwon, Republic of Korea Abstract: Owing to the Minamata Convention on Mercury and the Global Mercury Partnership, policies and regulations on mercury management in advanced countries were intensified by a mercury phaseout program in the mercury control strategy. In developing countries, the legislative or regulatory frameworks on mercury emissions are not established specifically, but mercury management is designed...

  17. [Video technology of qualitative control of eyeball movements in nystagmus].

    Science.gov (United States)

    Usanova, T B; Skripal', A V; Usanov, D A; Abramov, A V

    2002-01-01

    A method for controlling voluntary movements of the eye is suggested, based on video-image processing and computer analysis. The program can be used for analysis of eye movements by its trajectory and spectrum. Results of measurements of voluntary movements of the eye in patients with nystagmus are presented. The results of measurements, characterizing the changes in nystagmus before and after operation for strabismus correction are discussed.

  18. Research on the Implementation of Technological Measures for Controlling Indoor Environmental Quality in Green Residential Buildings

    Science.gov (United States)

    Wang, Ruozhu; Liu, Pengda; Qian, Yongmei

    2018-02-01

    This paper analyzes the design technology of controlling indoor quality in engineering practice, it is proposed that, in framework system of green residential building design, how to realize the design idea of controlling the indoor environment quality, and the design technology with feasibility, including the sunshine and lighting, indoor air quality and thermal environment, sound insulation and noise reduction measures, etc.. The results of all will provide a good theoretical supportting for the design of green residential building.

  19. Dove or Hawk? Characterizing monetary policy regime switches in India

    OpenAIRE

    Hutchison, MM; Sengupta, R; Singh, N

    2013-01-01

    The past two decades have witnessed a worldwide move by emerging markets to adopt explicit or implicit inflation targeting regimes. A notable and often discussed exception to this trend, of course, is China which follows a pegged exchange rate regime supported by capital controls. Another major exception is India. It is not clear how to characterize the monetary regime or identify the nominal monetary anchor in India. Is central bank policy in India following a predictable rule that is heavil...

  20. Statistical regimes of random laser fluctuations

    International Nuclear Information System (INIS)

    Lepri, Stefano; Cavalieri, Stefano; Oppo, Gian-Luca; Wiersma, Diederik S.

    2007-01-01

    Statistical fluctuations of the light emitted from amplifying random media are studied theoretically and numerically. The characteristic scales of the diffusive motion of light lead to Gaussian or power-law (Levy) distributed fluctuations depending on external control parameters. In the Levy regime, the output pulse is highly irregular leading to huge deviations from a mean-field description. Monte Carlo simulations of a simplified model which includes the population of the medium demonstrate the two statistical regimes and provide a comparison with dynamical rate equations. Different statistics of the fluctuations helps to explain recent experimental observations reported in the literature

  1. Environmental control implications of generating electric power from coal. Technology status report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized-bed combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems. Volume II presents the detailed technology analyses complete with reference citations. This same material is given in condensed form in Volume I without references. A brief executive summary is also given in Volume I.

  2. A Research Framework for Demonstrating Benefits of Advanced Control Room Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le Blanc, Katya [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hallbert, Bruce [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-12-01

    Control Room modernization is an important part of life extension for the existing light water reactor fleet. None of the 99 currently operating commercial nuclear power plants in the U.S. has completed a full-scale control room modernization to date. A full-scale modernization might, for example, entail replacement of all analog panels with digital workstations. Such modernizations have been undertaken successfully in upgrades in Europe and Asia, but the U.S. has yet to undertake a control room upgrade of this magnitude. Instead, nuclear power plant main control rooms for the existing commercial reactor fleet remain significantly analog, with only limited digital modernizations. Previous research under the U.S. Department of Energy’s Light Water Reactor Sustainability Program has helped establish a systematic process for control room upgrades that support the transition to a hybrid control. While the guidance developed to date helps streamline the process of modernization and reduce costs and uncertainty associated with introducing digital control technologies into an existing control room, these upgrades do not achieve the full potential of newer technologies that might otherwise enhance plant and operator performance. The aim of the control room benefits research presented here is to identify previously overlooked benefits of modernization, identify candidate technologies that may facilitate such benefits, and demonstrate these technologies through human factors research. This report serves as an outline for planned research on the benefits of greater modernization in the main control rooms of nuclear power plants.

  3. A Research Framework for Demonstrating Benefits of Advanced Control Room Technologies

    International Nuclear Information System (INIS)

    Le Blanc, Katya; Boring, Ronald; Joe, Jeffrey; Hallbert, Bruce; Thomas, Kenneth

    2014-01-01

    Control Room modernization is an important part of life extension for the existing light water reactor fleet. None of the 99 currently operating commercial nuclear power plants in the U.S. has completed a full-scale control room modernization to date. A full-scale modernization might, for example, entail replacement of all analog panels with digital workstations. Such modernizations have been undertaken successfully in upgrades in Europe and Asia, but the U.S. has yet to undertake a control room upgrade of this magnitude. Instead, nuclear power plant main control rooms for the existing commercial reactor fleet remain significantly analog, with only limited digital modernizations. Previous research under the U.S. Department of Energy's Light Water Reactor Sustainability Program has helped establish a systematic process for control room upgrades that support the transition to a hybrid control. While the guidance developed to date helps streamline the process of modernization and reduce costs and uncertainty associated with introducing digital control technologies into an existing control room, these upgrades do not achieve the full potential of newer technologies that might otherwise enhance plant and operator performance. The aim of the control room benefits research presented here is to identify previously overlooked benefits of modernization, identify candidate technologies that may facilitate such benefits, and demonstrate these technologies through human factors research. This report serves as an outline for planned research on the benefits of greater modernization in the main control rooms of nuclear power plants.

  4. Assessment of the State of the Art of Flight Control Technologies as Applicable to Adverse Conditions

    Science.gov (United States)

    Reveley, Mary s.; Briggs, Jeffrey L.; Leone, Karen M.; Kurtoglu, Tolga; Withrow, Colleen A.

    2010-01-01

    Literature from academia, industry, and other Government agencies was surveyed to assess the state of the art in current Integrated Resilient Aircraft Control (IRAC) aircraft technologies. Over 100 papers from 25 conferences from the time period 2004 to 2009 were reviewed. An assessment of the general state of the art in adaptive flight control is summarized first, followed by an assessment of the state of the art as applicable to 13 identified adverse conditions. Specific areas addressed in the general assessment include flight control when compensating for damage or reduced performance, retrofit software upgrades to flight controllers, flight control through engine response, and finally test and validation of new adaptive controllers. The state-of-the-art assessment applicable to the adverse conditions include technologies not specifically related to flight control, but may serve as inputs to a future flight control algorithm. This study illustrates existing gaps and opportunities for additional research by the NASA IRAC Project

  5. Control and Modelling of Seawater Desalination Using Solar Technology

    Energy Technology Data Exchange (ETDEWEB)

    Roca, L.; Yebra, L. J.; Berenguel, M.; Alarcon, D. C.

    2006-07-01

    Desalination plants play a fundamental role in fighting the shortage of fresh water in places with plentiful seawater resources. This paper briefly describes a solar desalination system designed, erected and operated in the AQUASOL project at the Plataforma Solar de Almeria (PSA), consisting basically of a CPC (Compound Parabolic Concentrator) solar collector field, two water storage tanks, a multi-effect distillation plant (MED) and a Double Effect Absorption Heat Pump (DEAHP). These subsystems have been modeled to estimate system behaviour and develop control techniques for maintaining optimal operating conditions. (Author)

  6. Weed control technology for environmentally, economically and socially sustainable agriculture

    International Nuclear Information System (INIS)

    Khan, A.R.; Srivastava, R.C.; Ghorai, A.K.; Singh, S.R.

    2001-04-01

    Studies were conducted through a series of experiments for five consecutive wet seasons with a variety of alternative biological weed control techniques by means of soil solarization. This is a method of heating soil surface by using transparent polyethylene sheets placed on soil surface to trap solar radiation. This raises soil temperature to a level lethal for many soil borne pathogens and weed seeds, thus killing weeds before crop emergence. The use of black low density polyethylene sheets reduces weed growth and increases rice yield

  7. Guidance and Control Concepts for the X-33 Technology Demonstrator

    Science.gov (United States)

    Dukeman, Gregory A.; Gallaher, Michael W.

    1998-01-01

    The X-33 technology demonstrator is a suborbital precursor to the Reusable Launch Vehicle (RLV) with first flight planned for summer of 1999. The flight test program will include about 15 flights originating from Edwards Air Force Base, California, each with widely varying flight profiles in order to test new thermal protection system (TPS) materials, structures, and linear aerospike engines. The first flights will be relatively short range flights with about a 300 nmi range, maximum Mach number of 7, maximum altitude of 190,000 feet, whereas the latter flights will cover about 800 nmi range, with max altitude of about 260,000 feet and max Mach of about 15. The guidance algorithms must be flexible enough to accommodate these various profiles and to adapt to severe off-nominal dispersions, such as early engine failure (partial or total) where possibly more than half the thrust is lost. An onboard real-time performance monitor will be used to assess the viability of the nominal landing site as well as alternate landing sites that would potentially be used in extreme off-nominal conditions. During ascent, a single entry guidance-related parameter, which is easy to calculate, is used to assess the viability of the nominal landing site as well as alternate landing sites. Real-time adjustment of the stored ascent attitude profile will be performed, as required, to maximize the probability of making it to the nominal landing site. Numerical results are given for various engine-out cases to illustrate the adaptability of the performance monitor.

  8. RNAi technology: a new platform for crop pest control.

    Science.gov (United States)

    Mamta, B; Rajam, M V

    2017-07-01

    The insect pests are big threat in meeting the food demands for future generation. The present pest control strategies, including the existing transgenic approaches show certain limitations and are not completely successful in limiting the insect pests. However, the sequence-specific gene silencing via RNA interference (RNAi) holds a great promise for effective management of agricultural pests. RNAi is naturally occurring conserved process responsible for gene regulation and defense against pathogens. The efficacy of RNAi varies among different insect orders and also depends upon various factors, including the target gene selection, method of dsRNAs delivery, expression of dsRNAs and presence of off-target effects. RNAi-mediated silencing of different insect genes involved in various physiological processes was found to be detrimental to insects growth, development and survival. In this article, we have reviewed the potential of RNAi-based strategies for effective management of insect pests. We have also discussed the various parameters, which are to be considered for host-induced RNAi-mediated control of insect pests without producing any effect on non-target organisms and environment.

  9. Fact sheet on nuclear power plant instrumentation and control technologies

    International Nuclear Information System (INIS)

    2006-01-01

    Nuclear power plants (NPPs) are facing challenges in several instrumentation and control (I and C) areas with ageing and obsolete components and equipment. With license renewals and power uprates, the long-term operation and maintenance of obsolete I and C systems may not be a cost-effective and reliable option. The effort needed to maintain or increase the reliability and useful life of existing I and C systems may be greater in the long run than modernizing I and C systems or replacing them completely with new digital systems. The increased functionality of the new I and C systems can also open up new possibilities to better support the operation and maintenance activities in the plant. The IAEA recognizes the importance of the profound role the I and C systems play in the reliable, safe, efficient, and cost-effective operations of NPPs by supporting the activities of the Department of Nuclear Energy's Technical Working Group on Nuclear Power Plant Control and Instrumentation (TWG-NPPCI). The group was established in March 1970. Its membership currently includes thirty Member States and three international organizations. The most recent meeting of the TWG-NPPCI was held in May 2005 in Vienna. The meeting report is available at http://www.iaea.org/OurWork/ST/NE/NENP/twg_nppc.html. The next meeting of the TWGNPPCI will be the 21st meeting of the advisory body, and it will be held in May 2007

  10. Applying Space Technology to Enhance Control of an Artificial Arm

    Science.gov (United States)

    Atkins, Diane; Donovan, William H.; Novy, Mara; Abramczyk, Robert

    1997-01-01

    At the present time, myoelectric prostheses perform only one function of the hand: open and close with the thumb, index and middle finger coming together to grasp various shaped objects. To better understand the limitations of the current single-function prostheses and the needs of the individuals who use them, The Institute for Rehabilitation and Research (TIRR), sponsored by the National Institutes of Health (August 1992 - November 1994), surveyed approximately 2500 individuals with upper limb loss. When asked to identify specific features of their current electric prosthesis that needed improvement, the survey respondents overwhelmingly identified the lack of wrist and finger movement as well as poor control capability. Simply building a mechanism with individual finger and wrist motion is not enough. Individuals with upper limb loss tend to reject prostheses that require continuous visual monitoring and concentration to control. Robotics researchers at NASA's Johnson Space Center (JSC) and Rice University have made substantial progress in myoelectric teleoperation. A myoelectric teleoperation system translates signals generated by an able-bodied robot operator's muscles during hand motions into commands that drive a robot's hand through identical motions. Farry's early work in myoelectric teleoperation used variations over time in the myoelectric spectrum as inputs to neural networks to discriminate grasp types and thumb motions. The resulting schemes yielded up to 93% correct classification on thumb motions. More recently, Fernandez achieved 100% correct non-realtime classification of thumb abduction, extension, and flexion on the same myoelectric data. Fernandez used genetic programming to develop functions that discriminate between thumb motions using myoelectric signal parameters. Genetic programming (GP) is an evolutionary programming method where the computer can modify the discriminating functions' form to improve its performance, not just adjust

  11. [Strategies and key technologies for risk control and management in quality of Chinese medicine injections based on integrated pharmacology].

    Science.gov (United States)

    Zhao, Xiao-ping; Kang, Li-yuan; Tang, Ren-mao; Li, Zheng

    2014-12-01

    This paper focuses on the quality risk control and management of Chinese medicine (CM) injections. The most important technological requirements are analyzed, and a strategy for integrated pharmacology to study CM mechanism is proposed. A key technology system for quality risk control and management was further constructed. The strategy and technology system was finally applied to Shengmai injection for quality risk control and management.

  12. PROCESS CONTROL IN THE EDUCATION OF ORGANIC CHEMICAL TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    lstván Csontos

    2001-06-01

    Full Text Available Las prácticas de laboratorio demuestran la importancia de los modernos procesos de control en las tecnologías de química orgánica. Se necesitaba desarrollar un sistema que une las ventajas de los calorímetros de reacción con las de modelo de los reactores controladas de la industria. El diseño de hardware y de software se permite trasladar el programa desarrollado en el laboratorio para el nivel industrial. El algoritmo general para las reacciones de diazotación y clormetilación es aplicado para el sintésis del cloruro de benzo-diazonio y cloruro de dietoxi-benzil en las prácticas de laboratorio.

  13. Intelligent control system for continuous technological process of alkylation

    Science.gov (United States)

    Gebel, E. S.; Hakimov, R. A.

    2018-01-01

    Relevance of intelligent control for complex dynamic objects and processes are shown in this paper. The model of a virtual analyzer based on a neural network is proposed. Comparative analysis of mathematical models implemented in MathLab software showed that the most effective from the point of view of the reproducibility of the result is the model with seven neurons in the hidden layer, the training of which was performed using the method of scaled coupled gradients. Comparison of the data from the laboratory analysis and the theoretical model are showed that the root-mean-square error does not exceed 3.5, and the calculated value of the correlation coefficient corresponds to a "strong" connection between the values.

  14. Industrial hygiene and control technology assessment of ion implantation operations

    International Nuclear Information System (INIS)

    Ungers, L.J.; Jones, J.H.

    1986-01-01

    Ion implantation is a process used to create the functional units (pn junctions) of integrated circuits, photovoltaic (solar) cells and other semiconductor devices. During the process, ions of an impurity or a dopant material are created, accelerated and imbedded in wafers of silicon. Workers responsible for implantation equipment are believed to be at risk from exposure to both chemical (dopant compounds) and physical (ionizing radiation) agents. In an effort to characterize the chemical exposures, monitoring for chemical hazards was conducted near eleven ion implanters at three integrated circuit facilities, while ionizing radiation was monitored near four of these units at two of the facilities. The workplace monitoring suggests that ion implantation operators routinely are exposed to low-level concentrations of dopants. Although the exact nature of dopant compounds released to the work environment was not determined, area and personal samples taken during normal operating activities found concentrations of arsenic, boron and phosphorous below OSHA Permissible Exposure Limits (PELs) for related compounds; area samples collected during implanter maintenance activities suggest that a potential exists for more serious exposures. The results of badge dosimetry monitoring for ionizing radiation indicate that serious exposures are unlikely to occur while engineering controls remain intact. All emissions were detected at levels unlikely to result in exposures above the OSHA standard for the whole body (1.25 rems per calendar quarter). The success of existing controls in preventing worker exposures is discussed. Particular emphasis is given to the differential exposures likely to be experienced by operators and maintenance personnel.(ABSTRACT TRUNCATED AT 250 WORDS)

  15. Evolving minimally invasive spine surgery: a surgeon's perspective on technological convergence and digital or control system.

    Science.gov (United States)

    Chiu, John C; Maziad, Ali M; Rappard, George; Thacker, James T; Liu, Brent; Documet, Jorge

    2010-04-01

    Degenerated spinal disc and spinal stenosis are common problems requiring decompressive spinal surgery. Traditional open spinal discectomy is associated with significant tissue trauma, greater morbidity/complications, scarring, often longer term of convalescence, and even destabilization of the spine. Therefore, the pursuit of less traumatic minimally invasive spine surgery (MISS) began. The trend of spinal surgery is rapidly moving toward MISS. MISS is a technologically dependent surgery, and requires increased utilization of advanced endoscopic surgical instruments, imaging-video technology, and tissue modulation technology for performing spinal surgery in a digital operating room (DOR). It requires seamless connectivity and control to perform the surgical procedures in a precise and orchestrated manner. A new integrated DOR, the technological convergence and control system SurgMatix(R), was created in response to the need and to facilitate MISS with "organized control instead of organized chaos" in the endoscopic OR suite. It facilitates the performance, training, and further development of MISS.

  16. The impact of active controls technology on the structural integrity of aeronautical vehicles

    Science.gov (United States)

    Noll, Thomas E.; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry; Kaynes, Ian; Lee, Ben; Sparrow, James

    1993-01-01

    The findings of an investigation conducted under the auspices of The Technical Cooperation Program (TTCP) to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle are summarized. Important points concerning structural technology considerations implicit in applying active controls technology in new aircraft are summarized. These points are well founded and based upon information received from within the aerospace industry and government laboratories, acquired by sponsoring workshops which brought together experts from contributing and interacting technical disciplines, and obtained by conducting a case study to independently assess the state of the technology. The paper concludes that communication between technical disciplines is absolutely essential in the design of future high performance aircraft.

  17. The research on information security technology for the industrial control system of special equipment

    International Nuclear Information System (INIS)

    Chen Ligang; Liu Hongye; Zhang Wei; Sun Jianying; Lan Peng; Dai Sidan

    2014-01-01

    With the rapid development of information technology in enterprise application, industrial control network and management network is becoming more and more closely linked. Development and application of special equipment control system from the traditional industrial control system, not considered when designing communication security problem mainly, therefore, the industrial control system opened at the same time, isolation control system and the outside was weakened, the safety problems of industrial control system had become more and more serious. The practical application combined with the special equipment control system, analysis and elaboration in view of security problems for the control network, also, provide appropriate security solutions for professional characteristics of industrial control network, design on process control system specially, provide security partition protection scheme, in order to improve security ability of industrial control system information. (authors)

  18. Bacteriophages againstSerratiaas Fish Spoilage Control Technology.

    Science.gov (United States)

    Hernández, Igor

    2017-01-01

    Bacteria of the genus Serratia , mainly S. proteamaculans and S. fonticola , are important spoilage agents in Atlantic horse mackerel ( Trachurus trachurus ). In order to evaluate whether bacteriophages against Serratia could delay the spoilage process, 11 viral strains active against this genus were isolated from food and best candidate was applied to fresh mackerel filets. All the phages belong to the Siphoviridae and Podoviridae families and were active at multiplicity of infection (MOI) levels below 1:1 in Long & Hammer broth. The ability of phage AZT6 to control Serratia populations in real food was tested in Atlantic horse mackerel extract and applied to fresh mackerel filets. Treatment with high phage concentration (MOI 350:1, initial Serratia population 3.9 ± 0.3 Log cfu/g) can reduce the Serratia populations up to 90% during fish storage (a maximum of 6 days) at low temperatures (6°C). Bacterial inhibition was dependent on the bacteriophage dosage, and MOI of 10:1 or lower did not significantly affect the Serratia populations.

  19. Research on reactor power controller based on artificial immune P and PID cascade control technology

    International Nuclear Information System (INIS)

    Cheng Shouyu; Peng Minjun; Liu Xinkai

    2014-01-01

    The Reactor Power control system usually adopts the traditional PID controller, the traditional PID controller can meet the operating requirements, but the control effect is not very good. In order to improve this condition, the paper proposes an immune P and PID cascade controller which based the immune mechanism of B-cell co-operating with T-cell, the nuclear power controller based on artificial immune is less reported. In order to verify and validate the control strategy, the designed controller debugs with the full-scope real-time simulation system of nuclear power plants. The simulation results shows that the immune controller can effectively improve the dynamic operating characteristics of the reactor system, and the immune controller is superior to the traditional PID controller in control performance. (authors)

  20. Investigation on food sanitation controlling technologies; Shokuhin eisei kanri gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Doi, Y. [Hokkaido Electric Power Co. Inc., Sapporo (Japan); Nishioka, J.

    2000-03-24

    Investigation has been made on the current status of food sanitation controlling technologies. Eighty percent of food poisoning is caused by bacte such as Salmonera, enteritis vibrio, staphylococcus, and pathogenic colibacillus. Putrefaction as the cause for food poisoning occurs from proliferation of different microorganisms. Heating sterilization is the main method being performed, but non-heating method may include sterilization by flash and high voltage pulse discharge in addition to ultra-high pressure and ultraviolet ray sterilization. As a result of the questionnaire survey, what is extracted as the problems in the food sanitation controlling technologies is to establish a rinsing and sterilizing method with large sterilization effect, an effective sterilizing method and thawing of processed marine products, and a cooling method in food processing. Increasingly demanded for the future is to develop a foodstuff sanitation control system using as the core the hazard analysis critical control point (HACCP, a quality control program developed by the U.S. NASA to ensure safety in manufacturing space food), and micro-organism control and sterilizing technologies to support the above system. The flash pulse and high-voltage pulse sterilizing technologies as the non-heating sterilizing technology are more effective than the conventional heating sterilization methods also from the aspect of quality retention after sterilization. More active development thereof is desired. (NEDO)

  1. JV Task 126 - Mercury Control Technologies for Electric Utilities Burning Bituminous Coal

    Energy Technology Data Exchange (ETDEWEB)

    Jason Laumb; John Kay; Michael Jones; Brandon Pavlish; Nicholas Lentz; Donald McCollor; Kevin Galbreath

    2009-03-29

    The EERC developed an applied research consortium project to test cost-effective mercury (Hg) control technologies for utilities burning bituminous coals. The project goal was to test innovative Hg control technologies that have the potential to reduce Hg emissions from bituminous coal-fired power plants by {ge}90% at costs of one-half to three-quarters of current estimates for activated carbon injection (ACI). Hg control technology evaluations were performed using the EERC's combustion test facility (CTF). The CTF was fired on pulverized bituminous coals at 550,000 Btu/hr (580 MJ/hr). The CTF was configured with the following air pollution control devices (APCDs): selective catalytic reduction (SCR) unit, electrostatic precipitator (ESP), and wet flue gas desulfurization system (WFDS). The Hg control technologies investigated as part of this project included ACI (three Norit Americas, Inc., and eleven Envergex sorbents), elemental mercury (Hg{sup 0}) oxidation catalysts (i.e., the noble metals in Hitachi Zosen, Cormetech, and Hitachi SCR catalysts), sorbent enhancement additives (SEAs) (a proprietary EERC additive, trona, and limestone), and blending with a Powder River Basin (PRB) subbituminous coal. These Hg control technologies were evaluated separately, and many were also tested in combination.

  2. 40 CFR 63.487 - Batch front-end process vents-reference control technology.

    Science.gov (United States)

    2010-07-01

    ... § 63.487 Batch front-end process vents—reference control technology. (a) Batch front-end process vents... process vent, reduce organic HAP emissions for the batch cycle by 90 weight percent using a control device... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Batch front-end process vents-reference...

  3. 78 FR 16532 - Certain Products Containing Interactive Program Guide and Parental Controls Technology...

    Science.gov (United States)

    2013-03-15

    ... Interactive Program Guide and Parental Controls Technology; Commission Determination Not To Review an Initial... States after importation of certain products containing interactive program guide and parental controls... confidential versions of the motion to terminate and the settlement agreement. On January 8, 2013, the ALJ...

  4. PERFORMANCE AND COST OF MERCURY AND MULTIPOLLUTANT EMISSION CONTROL TECHNOLOGY APPLICATIONS ON ELECTRIC UTILITY BOILERS

    Science.gov (United States)

    The report presents estimates of the performance and cost of both powdered activated carbon (PAC) and multipollutant control technologies that may be useful in controlling mercury emissions. Based on currently available data, cost estimates for PAC injection range are 0.03-3.096 ...

  5. Hydrogen-control systems for severe LWR accident conditions - a state-of-technology report

    Energy Technology Data Exchange (ETDEWEB)

    Hilliard, R K; Postma, A K; Jeppson, D W

    1983-03-01

    This report reviews the current state of technology regarding hydrogen safety issues in light water reactor plants. Topics considered in this report relate to control systems and include combustion prevention, controlled combustion, minimization of combustion effects, combination of control concepts, and post-accident disposal. A companion report addresses hydrogen generation, distribution, and combustion. The objectives of the study were to identify the key safety issues related to hydrogen produced under severe accident conditions, to describe the state of technology for each issue, and to point out ongoing programs aimed at resolving the open issues.

  6. Hydrogen-control systems for severe LWR accident conditions - a state-of-technology report

    International Nuclear Information System (INIS)

    Hilliard, R.K.; Postma, A.K.; Jeppson, D.W.

    1983-03-01

    This report reviews the current state of technology regarding hydrogen safety issues in light water reactor plants. Topics considered in this report relate to control systems and include combustion prevention, controlled combustion, minimization of combustion effects, combination of control concepts, and post-accident disposal. A companion report addresses hydrogen generation, distribution, and combustion. The objectives of the study were to identify the key safety issues related to hydrogen produced under severe accident conditions, to describe the state of technology for each issue, and to point out ongoing programs aimed at resolving the open issues

  7. Review of innovations in digital health technology to promote weight control.

    Science.gov (United States)

    Thomas, J Graham; Bond, Dale S

    2014-01-01

    Advances in technology have contributed to the obesity epidemic and worsened health by reducing opportunities for physical activity and by the proliferation of inexpensive calorie-dense foods. However, much of the same technology can be used to counter these troublesome trends by fostering the development and maintenance of healthy eating and physical activity habits. In contrast to intensive face-to-face treatments, technology-based interventions also have the potential to reach large numbers of individuals at low cost. The purpose of this review is to discuss studies in which digital technology has been used for behavioral weight control, report on advances in consumer technology that are widely adopted but insufficiently tested, and explore potential future directions for both. Web-based, mobile (eg, smartphone), virtual reality, and gaming technologies are the focus of discussion. The best evidence exists to support the use of digital technology for self-monitoring of weight-related behaviors and outcomes. However, studies are underway that will provide additional, important information regarding how best to apply digital technology for behavioral weight control.

  8. Technology Roadmap Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    Energy Technology Data Exchange (ETDEWEB)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-03-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order.Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies.

  9. Technology test bed engine real-time failure control

    Science.gov (United States)

    Panossian, Hagop V.; Kemp, Victoria R.

    1992-10-01

    The Real-Time Failure Control (RTFC) program involves development of a failure detection algorithm, for the Space Shuttle Main Engine (SSME). This failure detection approach is signal-based and entails monitoring SSME measurement signals based on predetermined as well as on-line computed mean and standard deviation values. Twenty-four engine measurements are monitored in the algorithm and provisions are made to add more parameters if needed. Each of the first values of every measurement signal at the algorithm start is checked against safety limits placed around a pre-computed engine-to-engine mean value (MV) with a bandwidth equal to a given multiple of the pre-computed standard deviation (SD). If several parameters are out of the bounds of these limits a failure is signaled. During the first two seconds (after algorithm start) a moving average (MA) and a SD is computed on-line in real-time. The moving average of each parameter is computed by averaging the incoming signal measurement with the four most recent previous signal measurements. The moving average is updated at every sampling interval (40 msec) and is checked against a similar safety band around the initial signal value for each parameter. If several anomalies are registered, a failure is signaled by the algorithm. At the end of the two-second interval the MA is fixed as the mean value for the rest of the algorithm operation and a safety band is placed above and below this value equal to a multiple of the computed SD. However, the safety band is adjusted by adjusting the mean value when propellant tank repressurization and venting take place. 'Influence Coefficients' are used to make the necessary adjustments to the safety limits of those parameters that are affected by repressurization and venting or valve closure and opening. The MA is, in both cases, continuously updated and checked against the safety band. Once more, if several parameters exceed the limits a failure is signaled. At the start of every

  10. Gossamer-1: Mission concept and technology for a controlled deployment of gossamer spacecraft

    Science.gov (United States)

    Seefeldt, Patric; Spietz, Peter; Sproewitz, Tom; Grundmann, Jan Thimo; Hillebrandt, Martin; Hobbie, Catherin; Ruffer, Michael; Straubel, Marco; Tóth, Norbert; Zander, Martin

    2017-01-01

    Gossamer structures for innovative space applications, such as solar sails, require technology that allows their controlled and thereby safe deployment. Before employing such technology for a dedicated science mission, it is desirable, if not necessary, to demonstrate its reliability with a Technology Readiness Level (TRL) of six or higher. The aim of the work presented here is to provide reliable technology that enables the controlled deployment and verification of its functionality with various laboratory tests, thereby qualifying the hardware for a first demonstration in low Earth orbit (LEO). The development was made in the Gossamer-1 project of the German Aerospace Center (DLR). This paper provides an overview of the Gossamer-1 mission and hardware development. The system is designed based on the requirements of a technology demonstration mission. The design rests on a crossed boom configuration with triangular sail segments. Employing engineering models, all aspects of the deployment were tested under ambient environment. Several components were also subjected to environmental qualification testing. An innovative stowing and deployment strategy for a controlled deployment, as well as the designs of the bus system, mechanisms and electronics are described. The tests conducted provide insights into the deployment process and allow a mechanical characterization of that deployment process, in particular the measurement of the deployment forces. Deployment on system level could be successfully demonstrated to be robust and controllable. The deployment technology is on TRL four approaching level five, with a qualification model for environmental testing currently being built.

  11. Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

    2012-03-01

    This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

  12. Monitoring and control requirement definition study for Dispersed Storage and Generation (DSG). Volume 2, appendix A: Selected DSG technologies and their general control requirements

    Science.gov (United States)

    1980-01-01

    A consistent approach was sought for both hardware and software which will handle the monitoring and control necessary to integrate a number of different DSG technologies into a common distribution dispatch network. It appears that the control of each of the DSG technologies is compatible with a supervisory control method of operation that lends itself to remote control from a distribution dispatch center.

  13. Technological measures for controlling the use of copyrighted works of authorship in the information society

    Directory of Open Access Journals (Sweden)

    Spasić Vidoje

    2016-01-01

    Full Text Available Information technology has given rise to the problem of controlling the use of copyrighted works of authorship from their unauthorized use. In this context, one of the effective solutions is the application of technological protection measures, which are aimed at a more efficient application of the protection measures prescribed by the law. Technological protection measures imply the use of any technology, device or component which may be aimed at preventing or restricting an unauthorized use of a protected work of authorship, which has not been approved by the author or holder of some related right. Generally, all these measures may be classified into three basic groups: technological measures aimed at controlling access, technological measured aimed at controlling exploitation, and technological measures aimed at protecting the integrity of the work of authorship. Considering their technical characteristics and mode of application, they may be hardware-based measures, software-based measures, or a combination thereof. Modern technology has enabled the development of digital systems which entail a controlled use of copyrighted works and facilitate obtaining licences for their exploitation. They are commonly known as digital rights management (DRM. The DRM system should provide for a compromise between safeguarding the intellectual property rights of the copyright holder, the end user privacy, and system costs. The envisaged goals are achieved by employing various cryptographic measures. The process of developing technological protection measures is accompanied by concurrent attempts to circumvent the application of these measures. Thus, the effectiveness of these measures primarily depends on their legal protection, which has been recognized by a vast majority of legal systems, we now know the most modern legal system. However, the normative solutions are not uniform. The observed differences actually reflect problems in finding adequate forms

  14. Unitary Housing Regimes in Transition

    DEFF Research Database (Denmark)

    Bengtsson, Bo; Jensen, Lotte

    2013-01-01

    to the Danish and Swedish housing regimes are analysed and the responses and outcomes in terms of policy change and/or institutional continuity (path dependence) are compared. Overall, the more decentralized Danish housing regime seems to have resisted pressures for change and retrenchment better so far than...

  15. Human factors design review guidelines for advanced nuclear control room technologies

    International Nuclear Information System (INIS)

    O'Hara, J.; Brown, W.; Granda, T.; Baker, C.

    1991-01-01

    Advanced control rooms (ACRs) for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering aspects of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. This paper describes the rationale, general approach, and initial development of an NRC Advanced Control Room Design Review Guideline. 20 refs., 1 fig

  16. Orbit transfer rocket engine integrated control and health monitoring system technology readiness assessment

    Science.gov (United States)

    Bickford, R. L.; Collamore, F. N.; Gage, M. L.; Morgan, D. B.; Thomas, E. R.

    1992-01-01

    The objectives of this task were to: (1) estimate the technology readiness of an integrated control and health monitoring (ICHM) system for the Aerojet 7500 lbF Orbit Transfer Vehicle engine preliminary design assuming space based operations; and (2) estimate the remaining cost to advance this technology to a NASA defined 'readiness level 6' by 1996 wherein the technology has been demonstrated with a system validation model in a simulated environment. The work was accomplished through the conduct of four subtasks. In subtask 1 the minimally required functions for the control and monitoring system was specified. The elements required to perform these functions were specified in Subtask 2. In Subtask 3, the technology readiness level of each element was assessed. Finally, in Subtask 4, the development cost and schedule requirements were estimated for bringing each element to 'readiness level 6'.

  17. Advantages of new micro-jet welding technology on weld microstructure control

    Directory of Open Access Journals (Sweden)

    Jan PIWNIK

    2013-01-01

    Full Text Available An innovative apparatus to welding process with micro-jet cooling of the weld made it possible to carry out technological tests, which have proved theoretical considerations about this problem. This project gives real opportunities for professional development in the field of welding with controlling the parameters of weld structure. These tests have proved that the new micro-jet technology has the potential for growth. It may be great achievement of welding technology in order to increase weld metal strength. The new technology with micro-jet cooling may have many practical applications in many fields, for example such as in the transport industry or to repair damaged metal elements. The advantages of the new device over the traditional system are the ability to control the structure of the weld, the weld mechanical performance increases and improve the quality of welded joints.

  18. Propulsion Control Technology Development in the United States A Historical Perspective

    Science.gov (United States)

    Jaw, Link C.a; Garg, Sanjay

    2005-01-01

    This paper presents a historical perspective of the advancement of control technologies for aircraft gas turbine engines. The paper primarily covers technology advances in the United States in the last 60 years (1940 to approximately 2002). The paper emphasizes the pioneering technologies that have been tested or implemented during this period, assimilating knowledge and experience from industry experts, including personal interviews with both current and retired experts. Since the first United States-built aircraft gas turbine engine was flown in 1942, engine control technology has evolved from a simple hydro-mechanical fuel metering valve to a full-authority digital electronic control system (FADEC) that is common to all modern aircraft propulsion systems. At the same time, control systems have provided engine diagnostic functions. Engine diagnostic capabilities have also evolved from pilot observation of engine gauges to the automated on-board diagnostic system that uses mathematical models to assess engine health and assist in post-flight troubleshooting and maintenance. Using system complexity and capability as a measure, we can break the historical development of control systems down to four phases: (1) the start-up phase (1942 to 1949), (2) the growth phase (1950 to 1969), (3) the electronic phase (1970 to 1989), and (4) the integration phase (1990 to 2002). In each phase, the state-of-the-art control technology is described and the engines that have become historical landmarks, from the control and diagnostic standpoint, are identified. Finally, a historical perspective of engine controls in the last 60 years is presented in terms of control system complexity, number of sensors, number of lines of software (or embedded code), and other factors.

  19. Commercialization of JPL Virtual Reality calibration and redundant manipulator control technologies

    Science.gov (United States)

    Kim, Won S.; Seraji, Homayoun; Fiorini, Paolo; Brown, Robert; Christensen, Brian; Beale, Chris; Karlen, James; Eismann, Paul

    1994-01-01

    Within NASA's recent thrust for industrial collaboration, JPL (Jet Propulsion Laboratory) has recently established two technology cooperation agreements in the robotics area: one on virtual reality (VR) calibration with Deneb Robotics, Inc., and the other on redundant manipulator control with Robotics Research Corporation (RRC). These technology transfer cooperation tasks will enable both Deneb and RRC to commercialize enhanced versions of their products that will greatly benefit both space and terrestrial telerobotic applications.

  20. Integration of a blood pressure controller and an infusion toolbox system using client-server technology.

    Science.gov (United States)

    Meijers, R H; Coussaert, E J; Cantraine, F R

    1998-05-01

    This paper shortly describes an Infusion Toolbox and a blood pressure (BP) control application. It explains how we applied an agent model and client-server technology to integrate them. We show that by using this framework and object oriented technologies the necessary changes to the existing applications are reduced. Many elements of the tested original systems could be re-used, which enhances safe development.

  1. A framework for selecting suitable control technologies for nuclear power plant systems

    International Nuclear Information System (INIS)

    Kisner, R.A.

    1992-01-01

    New concepts continue to emerge for controlling systems, subsystems, and components and for monitoring parameters, characteristics, and vital signs in nuclear power plants. The steady stream of new control theories and the evolving state of control software exacerbates the difficulty of selecting the most appropriate control technology for nuclear power plant systems. As plant control room operators increase their reliance on computerized systems, the integration of monitoring, diagnostic, and control functions into a uniform and understandable environment becomes imperative. A systematic framework for comparing and evaluating the overall usefulness of control techniques is needed. This paper describes nine factors that may be used to evaluate alternative control concepts. These factors relate to a control system's potential effectiveness within the context of the overall environment, including both human and machine components. Although not an in-depth study, this paper serves to outline an evaluation framework based on several measures of utility. 32 refs

  2. An assessment of advanced displays and controls technology applicable to future space transportation systems

    Science.gov (United States)

    Hatfield, Jack J.; Villarreal, Diana

    1990-01-01

    The topic of advanced display and control technology is addressed along with the major objectives of this technology, the current state of the art, major accomplishments, research programs and facilities, future trends, technology issues, space transportation systems applications and projected technology readiness for those applications. The holes that may exist between the technology needs of the transportation systems versus the research that is currently under way are addressed, and cultural changes that might facilitate the incorporation of these advanced technologies into future space transportation systems are recommended. Some of the objectives are to reduce life cycle costs, improve reliability and fault tolerance, use of standards for the incorporation of advancing technology, and reduction of weight, volume and power. Pilot workload can be reduced and the pilot's situational awareness can be improved, which would result in improved flight safety and operating efficiency. This could be accomplished through the use of integrated, electronic pictorial displays, consolidated controls, artificial intelligence, and human centered automation tools. The Orbiter Glass Cockpit Display is an example examined.

  3. Advanced optical sensing and processing technologies for the distributed control of large flexible spacecraft

    Science.gov (United States)

    Williams, G. M.; Fraser, J. C.

    1991-01-01

    The objective was to examine state-of-the-art optical sensing and processing technology applied to control the motion of flexible spacecraft. Proposed large flexible space systems, such an optical telescopes and antennas, will require control over vast surfaces. Most likely distributed control will be necessary involving many sensors to accurately measure the surface. A similarly large number of actuators must act upon the system. The used technical approach included reviewing proposed NASA missions to assess system needs and requirements. A candidate mission was chosen as a baseline study spacecraft for comparison of conventional and optical control components. Control system requirements of the baseline system were used for designing both a control system containing current off-the-shelf components and a system utilizing electro-optical devices for sensing and processing. State-of-the-art surveys of conventional sensor, actuator, and processor technologies were performed. A technology development plan is presented that presents a logical, effective way to develop and integrate advancing technologies.

  4. Performance Benefits for a Turboshaft Engine Using Nonlinear Engine Control Technology Investigated

    Science.gov (United States)

    Jones, Scott M.

    2004-01-01

    The potential benefits of nonlinear engine control technology applied to a General Electric T700 helicopter engine were investigated. This technology is being developed by the U.S. Navy SPAWAR Systems Center for a variety of applications. When used as a means of active stability control, nonlinear engine control technology uses sensors and small amounts of injected air to allow compressors to operate with reduced stall margin, which can improve engine pressure ratio. The focus of this study was to determine the best achievable reduction in fuel consumption for the T700 turboshaft engine. A customer deck (computer code) was provided by General Electric to calculate the T700 engine performance, and the NASA Glenn Research Center used this code to perform the analysis. The results showed a 2- to 5-percent reduction in brake specific fuel consumption (BSFC) at the three Sikorsky H-60 helicopter operating points of cruise, loiter, and hover.

  5. Wind Turbine Technologies

    DEFF Research Database (Denmark)

    Hansen, Anca Daniela

    2017-01-01

    The wind turbine technology is a very complex technology involving multidisciplinary and broad technical disciplines such as aerodynamics, mechanics, structure dynamics, meteorology as well as electrical engineering addressing the generation, transmission, and integration of wind turbines...... into the power system. Wind turbine technology has matured over the years and become the most promising and reliable renewable energy technology today. It has moved very fast, since the early 1980s, from wind turbines of a few kilowatts to today’s multimegawatt-sized wind turbines [13]. Besides their size......, the design of wind turbines has changed from being convention driven to being optimized driven within the operating regime and market environment. Wind turbine designs have progressed from fixed speed, passive controlled and with drive trains with gearboxes, to become variable speed, active controlled...

  6. The Foundation for Application of Multi-Agent Technology In a Holonic Shop Floor Control Architecture

    DEFF Research Database (Denmark)

    Langer, Gilad; Bilberg, Arne

    1997-01-01

    The emerging theory regarding Holonic Manufacturing Systems (HMS) presents a advantageous theoretical foundation for the control system of the manufacturing system of the future. Previous research, at the Department, has demonstrated how company tailored shop floor control can be developed...... in a cellular manufacturing perspective. Additionally, issues regarding the feasibility and extent of application of agents in holonic cellular shop floor control will be discussed. We will argue that this architecture is the needed foundation for implementation of agent technology in manufacturing system...... control. The work is based on a theoretical study of new manufacturing systems theories, research of agent multi-agent technology, and two case studies. It is part of a larger research project which aims at developing a multi-cell control architecture based on the Holonic Manufacturing System theory....

  7. DISTURBANCE ERROR INVARIANCE IN AUTOMATIC CONTROL SYSTEMS FOR TECHNOLOGICAL OBJECT TRAJECTORY MOVEMENT

    Directory of Open Access Journals (Sweden)

    A. V. Lekareva

    2016-09-01

    Full Text Available We consider combined control in automatic control systems for technological objects trajectory movements. We present research results of the system disturbance invariance ensuring on the example of the technological manipulator that implements hydrocutting of the oil pipelines. Control is based on the propositions of the fourth modified invariance form with the use of bootstrapping methods. The paper presents analysis of results obtained by two different correction methods. The essence of the first method lies in injection of additional component into the already established control signal and formation of the channel for that component. Control signal correction during the signal synthesis stage in the control device constitutes the basis for the second method. Research results have shown high efficiency of application for both correction methods. Both methods have roughly the same precision. We have shown that the correction in the control device is preferable because it has no influence on the inner contour of the system. We have shown the necessity of the block usage with the variable transmission coefficient, which value is determined by technological trajectory parameters. Research results can be applied in practice for improvement of the precision specifications of automatic control systems for trajectorial manipulators.

  8. Preferences for technology versus human assistance and control over technology in the performance of kitchen and personal care tasks in baby boomers and older adults.

    Science.gov (United States)

    Beach, Scott R; Schulz, Richard; Matthews, Judith T; Courtney, Karen; Dabbs, Annette DeVito

    2014-11-01

    Quality of Life technology (QoLT) stresses humans and technology as mutually dependent and aware, working together to improve task performance and quality of life. This study examines preferences for technology versus human assistance and control in the context of QoLT. Data are from a nationally representative, cross-sectional web-based sample of 416 US baby boomers (45-64) and 114 older adults (65+) on preferences for technology versus human assistance and control in the performance of kitchen and personal care tasks. Multinomial logistic regression and ordinary least squares regression were used to determine predictors of these preferences. Respondents were generally accepting of technology assistance but wanted to maintain control over its' operation. Baby boomers were more likely to prefer technology than older adults, and those with fewer QoLT privacy concerns and who thought they were more likely to need future help were more likely to prefer technology over human assistance and more willing to relinquish control to technology. Results suggest the need for design of person- and context-aware QoLT systems that are responsive to user desires for level of control over operation of the technology. The predictors of these preferences suggest potentially receptive markets for the targeting of QoLT systems.

  9. A Pilot Trial of Jawarish Amla as Adjuvant to Anti-Tubercular Treatment Drugs for Control of Adverse Reactions in DOTS Regime in Pulmonary TB.

    Science.gov (United States)

    Sherwani, Arish Mohammad Khan; Zulkifle, Mohammad; Rehmatulla

    2012-01-01

    One of the greatest challenges of health care systems at the dawn of the 21st century is tuberculosis (TB). Drug resistant strains of TB are becoming a global public health risk. These strains commonly appear due to faulty therapies. Patients frequently stop treatment due to the toxicity of anti-tubercular treatment (ATT) drugs. Amla (Emblica officinalis) is a well-known Unani single drug. Jawarish amla is a Unani compound formulation which is commonly used to administer amla. This study tested the efficacy of Jawarish amla as an adjuvant to ATT drugs in reducing their side effects. Half of forty eligible pulmonary tuberculosis patients were randomly assigned to Test (Group B) and the other half to Control (Group A). Six grams of Jawarish amla twice daily was administered to the test group, and the same dosage of placebo was administered to control group along with directly observed treatment, short course chemotherapy (DOTS) for 60 days. Fisher exact test and paired t-test were applied for efficacy evaluation. Grading of symptoms was done to assess the toxicity of ATT and outcome of the adjuvant. Significant improvements were observed in almost all subjective and objective parameters. The exceptions were serum creatine and serum uric acid, which showed non-significant slight elevations within normal limits. Jawarish amla was ascertained to be safe and effective adjuvant of DOTS in combating the adverse effects of ATT drugs.

  10. Hydrological regimes in Balkan Area

    International Nuclear Information System (INIS)

    Stanescu, Viorel Alexandru

    2004-01-01

    Physical considerations of the deemed area are first considered in the paper. Then the regime types around the Balkan rivers are described in terms of the following characteristic features: -Types of the regimes defined by the timing of the high and low flow phases; -Regionalisation of the 'micro-types' -Stability of the river flow regimes. The available mean monthly discharge data of the representative rivers allows characterising the river regime of the Balkan area covered by WOISYDES and BALWOIS projects. The classification of the hydrological regimes (types of regimes) was done by assessing the discriminant periods (descriptors of the regime phases) defined by the first, the second and the third highest and lowest monthly values of flows. As sufficient data has been provided by countries involved in the Woisydes/Balwois Project a hydrological regionalisation is performed all around the considered space. The existence of different zones, which are quasi- homogeneous in terms of physiographical properties, the latter especially being expressed by their mean altitudes and the climatic features, allowed to carry out a hydrological regionalisation of the river flow regime types. The regionalisation of the river flow regimes is presented as hydrological maps both referring to each Balkan country and for the entire region as an overall map. The stability of a certain flow regime is an important descriptor of the ecological state of the river during the year. It may be quantitatively expressed by the stability coefficient determined by Corbus and Stanescu as the product between the frequency of the occurrence of any discriminant value in m subsequent month (m = 1,12) and a distribution coefficient along the period that depend on the length of the considered discriminant period. The advantage of this method stands in the fact that for several combinations of subsequent months, the maximisation of the stability coefficient leads to the assessment of the characteristic

  11. Toward High Magnetic Moment, Controlled-Size, Blood Dispersible Nanoparticles: An Enabling Technology for Biomagnetics Interfacing Concepts

    Science.gov (United States)

    2006-03-02

    SUBTITLE Toward High Magnetic Moment, Controlled-Size, Blood Dispersible Nanoparticles: An Enabling Technology for Biomagnetics Interfacing...Dispersible Nanoparticles: An Enabling Technology for Biomagnetic Interfacing Concepts Final Report submitted to Dr. Hugh DeLong, AFOSR, and Dr

  12. ASSESSMENT OF CONTROL TECHNOLOGIES FOR REDUCING EMISSIONS OF SO2 AND NOX FROM EXISTING COAL-FIRED UTILITY BOILERS

    Science.gov (United States)

    The report reviews information and estimated costs on 15 emissioncontrol technology categories applicable to existing coal-fired electric utility boilers. he categories include passive controls such as least emission dispatching, conventional processes, and emerging technologies ...

  13. Characterization of particle bound organic carbon from diesel vehicles equipped with advanced emission control technologies.

    Science.gov (United States)

    Pakbin, Payam; Ning, Zhi; Schauer, James J; Sioutas, Constantinos

    2009-07-01

    A chassis dynamometer study was carried out by the University of Southern California in collaboration with the Air Resources Board (CARB) to investigate the physical, chemical, and toxicological characteristics of diesel emissions of particulate matter (PM) from heavy-duty vehicles. These heavy-duty diesel vehicles (HDDV) were equipped with advanced emission control technologies, designed to meet CARB retrofit regulations. A HDDV without any emission control devices was used as the baseline vehicle. Three advanced emission control technologies; continuously regenerating technology (CRT), zeolite- and vanadium-based selective catalytic reduction technologies (Z-SCRT and V-SCRT), were tested under transient (UDDS) (1) and cruise (80 kmph) driving cycles to simulate real-world driving conditions. This paper focuses on the characterization of the particle bound organic species from the vehicle exhaust. Physical and chemical properties of PM emissions have been reported by Biswas et al. Atmos. Environ. 2008, 42, 5622-5634) and Hu et al. (Atmos. Environ. 2008, submitted) Significant reductions in the emission factors (microg/mile) of particle bound organic compounds were observed in HDDV equipped with advanced emission control technologies. V-SCRT and Z-SCRT effectively reduced PAHs, hopanes and steranes, n-alkanes and acids by more than 99%, and often to levels below detection limits for both cruise and UDDS cycles. The CRT technology also showed similar reductions with SCRT for medium and high molecular weight PAHs, acids, but with slightly lower removal efficiencies for other organic compounds. Ratios of particle bound organics-to-OC mass (microg/g) from the baseline exhaust were compared with their respective ratios in diesel fuel and lubricating oil, which revealed that hopanes and steranes originate from lubricating oil, whereas PAHs can either form during the combustion process or originate from diesel fuel itself. With the introduction of emission control

  14. Self-organized sociopolitical interactions as the best way to achieve organized patterns in human social systems: going beyond the top-down control of classical political regimes

    OpenAIRE

    Mezza-García, Nathalie

    2013-01-01

    La monografía presenta la auto-organización sociopolítica como la mejor manera de lograr patrones organizados en los sistemas sociales humanos, dada su naturaleza compleja y la imposibilidad de las tareas computacionales de los regímenes políticos clásico, debido a que operan con control jerárquico, el cual ha demostrado no ser óptimo en la producción de orden en los sistemas sociales humanos. En la monografía se extrapola la teoría de la auto-organización en los sistemas biológicos a las din...

  15. Nondestructive assay technology and in-plant dynamic materials control: ''DYMAC''

    International Nuclear Information System (INIS)

    Keppin, G.R.; Maraman, W.J.

    1975-01-01

    An advanced system of in-plant materials control known as DYMAC, Dynamic Materials Control, is being developed. This major safeguards R and D effort merges state-of-the-art nondestructive assay instrumentation and computer technology, with the clear objective of demonstrating a workable, cost-effective system of stringent, real time control of nuclear materials in a modern plutonium processing facility. Emphasis is placed on developing practical solutions to generic problems of materials measurement and control, so that resulting safeguards techniques and instrumentation will have widespread applicability throughout the nuclear community. (auth)

  16. Eco-hydrological Controls on Litter Moisture Dynamics in Complex Terrain: Implications for Fuel Moisture and Fire Regimes in Temperate Forests

    Science.gov (United States)

    Nyman, P.; Duff, T. J.; Sheridan, G. J.

    2016-12-01

    Moisture content in litter on the forest floor can control ignition and spread of forest fires. The micrometeorological factors driving variation in litter moisture at the landscape scale are poorly understood, particularly in areas with heterogeneous vegetation and complex terrain. In this research we seek to quantify how climate, vegetation and eco-hydrological feedbacks contribute to variation in net radiation and potential evaporation at the forest floor. Research sites were established at 12 locations in southeast Australia with variable precipitation, solar exposure, and drainage areas. Forests ranged from open woodland to tall temperate forests. We measured solar radiation, air temperature, relative humidity, litter moisture, soil moisture, and litter temperature. Forest structure was characterised using hemispherical photos and LIDAR. Using these data on microclimate and vegetation structure we parameterise a model of daily potential evaporation at the forest floor. Results show that variation in evaporation rates from litter is driven by net radiation and the role of vapour pressure deficit is almost negligible due to high aerodynamic resistance. In open woodlands the net radiation is directly related to short-wave radiation and evaporation remains high despite low temperatures. In the tall wet forests, commonly found along drainage lines and on slopes with polar-facing aspects, the long-wave radiation was just as important as the shortwave radiation. Air temperature is therefore important in determining the flammability of these more productive forests. By implication, in complex terrain with heterogeneous forests, the temperature in the wet parts of the landscape is important in controlling connectivity of fuels and large-scale fire activity.

  17. Study of fieldbus technology confiability when applied in a Sterilization plant control and safety systems

    International Nuclear Information System (INIS)

    Karma, D.; Sampa, M.H.O.; Rela, P.R.

    2001-01-01

    Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible the application of that process, in 1960, also in the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides news applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. This paper show preliminary study about confiability in systems using Fieldbus technology. This technology was simulated in sterilization plant control and safety systems and the fail probability was quantified using Fail Tree Analysis Method. Fieldbus technology can be used in sterilization plants because the confiability in this systems is like PLCs and relays systems, was the conclusion

  18. A post-Kyoto partner: considering the stratospheric ozone regime as a tool to manage nitrous oxide.

    Science.gov (United States)

    Kanter, David; Mauzerall, Denise L; Ravishankara, A R; Daniel, John S; Portmann, Robert W; Grabiel, Peter M; Moomaw, William R; Galloway, James N

    2013-03-19

    Nitrous oxide (N2O) is the largest known remaining anthropogenic threat to the stratospheric ozone layer. However, it is currently only regulated under the 1997 Kyoto Protocol because of its simultaneous ability to warm the climate. The threat N2O poses to the stratospheric ozone layer, coupled with the uncertain future of the international climate regime, motivates our exploration of issues that could be relevant to the Parties to the ozone regime (the 1985 Vienna Convention and its 1987 Montreal Protocol) should they decide to take measures to manage N2O in the future. There are clear legal avenues to regulate N2O under the ozone regime as well as several ways to share authority with the existing and future international climate treaties. N2O mitigation strategies exist to address the most significant anthropogenic sources, including agriculture, where behavioral practices and new technologies could contribute significantly to reducing emissions. Existing policies managing N2O and other forms of reactive nitrogen could be harnessed and built on by the ozone regime to implement N2O controls. There are several challenges and potential cobenefits to N2O control which we discuss here: food security, equity, and implications of the nitrogen cascade. The possible inclusion of N2O in the ozone regime need not be viewed as a sign of failure of the United Nations Framework Convention on Climate Change to adequately deal with climate change. Rather, it could represent an additional valuable tool in sustainable development diplomacy.

  19. Crossflow and water banks in viscous dominant regimes of waterflooding

    DEFF Research Database (Denmark)

    Yuan, Hao; Zhang, Xuan; Shapiro, Alexander

    2014-01-01

    Understanding the crossflow in multilayered reservoirs is of great importance for designing mobility control methods for enhanced oil recovery. The authors reveal saturation profiles in stratified reservoirs to study the interlayer communication in the viscous dominant regime. The displacement...

  20. Symposium on condenser macrofouling control technologies: the state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Tous, I.A.; Miller, M.J. (eds.)

    1983-12-01

    This report is divided into five parts corresponding to the five symposium sessions in which formal presentations and discussions were held. Session 1 discussed the nature of macrofouling problems in general and their impact on power plant operation. Session 2 discussed chemical control technologies, basically chlorine minimization, continuous low-level chlorination, cost of chlorination for the utility industry, and the effects of organotins on marine organisms. Session 3 discussed international experiences (from the United States, France, Germany and the Netherlands) with mechanical controls such as intake screening, in-line filters, and thermal backwash. Alternate control technologies, including antifouling coatings and sheetings, nontoxic sheetings, acoustical, velocity, and Cathelco, were discussed in Session 4. Session 5 consisted of information exchange workshops on utility experience with mechanical and chemical controls. The workshop's notes are presented in this report. Papers presented at the symposium are included. Each paper has been indexed separately for inclusion in the Energy Data Base.

  1. Tidal regimes and salt marshes - the River Hamble analogue

    International Nuclear Information System (INIS)

    Gray, A.J.; Moy, I.L.; Warman, E.A.; Dawson, F.H.; Henville, P.

    1993-01-01

    Construction of estuarine tidal-energy barrages has a potentially major effect on the tidal regime of the estuary, particularly upstream of a barrage. Because tidal regime largely controls the distribution and species composition of intertidal plant and animal communities, it is important to understand how barrages may affect such communities. The main objectives of the research described in this report were to relate recent changes in tidal regime within an embanked area of salt marsh and mudflat to changes in the distribution of plant species. This was to test predictions about tidal control of species' range and to assess the site's suitability as an analogue of post-barrage conditions. (author)

  2. Export Controls: A Contemporary History

    OpenAIRE

    Chapman, Bert

    2013-01-01

    Provides highlights of my recently published book Export Controls: A Contemporary History. Describes the roles played by multiple U.S. Government agencies and congressional oversight committees in this policymaking arena including the Commerce, Defense, State, and Treasury Departments. It also reviews the roles played by international government organizations such as the Missile Technology Control Regime, export oriented businesses, and research intensive universities.

  3. Enabling Patient Control of Personal Electronic Health Records Through Distributed Ledger Technology.

    Science.gov (United States)

    Cunningham, James; Ainsworth, John

    2017-01-01

    The rise of distributed ledger technology, initiated and exemplified by the Bitcoin blockchain, is having an increasing impact on information technology environments in which there is an emphasis on trust and security. Management of electronic health records, where both conformation to legislative regulations and maintenance of public trust are paramount, is an area where the impact of these new technologies may be particularly beneficial. We present a system that enables fine-grained personalized control of third-party access to patients' electronic health records, allowing individuals to specify when and how their records are accessed for research purposes. The use of the smart contract based Ethereum blockchain technology to implement this system allows it to operate in a verifiably secure, trustless, and openly auditable environment, features crucial to health information systems moving forward.

  4. [The role of government in the control of technology research and development].

    Science.gov (United States)

    Ulbrecht, J J; Edgerly, D E

    1994-11-21

    It is obvious that government cannot afford to refuse support to precommercial general research and development because they would thus deprive their national industry of a very important source. The new administration of President Clinton emphasized particularly the role of the government in the control of technological research and development. The United States wil in future not rely on the action of market forces in the commercialization of new innovating technologies and shy away from their responsibility. In a recent document Technology for America's Economic Growth President Clinton said: "Investing in technology is investing into America's future. The traditional support of basic science and defence-oriented research only was a strategy suited for previous generations, but not for coping with the complicated problems of today. Therefore we must focus attention on these new and difficult tasks, being aware that the Government can play a key role in the help given to private firms with their innovation."

  5. THE AUDIT OF THE QUALITY CONTROL SYSTEM WITHIN THE INFORMATION TECHNOLOGY FIELD

    Directory of Open Access Journals (Sweden)

    Robert Gabriel Dragomir

    2017-06-01

    Full Text Available The present paper speaks about the audit of the quality control system. First we exposed the general framework; the importance of information technology field under the actual development and challenges of the informatics systems. Then, we presented the national and international laws which regulate the audit of the informatics systems. Thirdly, we exposed the methodology of the audit for the quality system control in IT domain, describing its stages and flux diagram. In the end we jumped at the conclusions.

  6. Role and interest of new technologies in data processing for space control centers

    Science.gov (United States)

    Denier, Jean-Paul; Caspar, Raoul; Borillo, Mario; Soubie, Jean-Luc

    1990-10-01

    The ways in which a multidisplinary approach will improve space control centers is discussed. Electronic documentation, ergonomics of human computer interfaces, natural language, intelligent tutoring systems and artificial intelligence systems are considered and applied in the study of the Hermes flight control center. It is concluded that such technologies are best integrated into a classical operational environment rather than taking a revolutionary approach which would involve a global modification of the system.

  7. Current status of the radiation technology and quality control for radiation processing in Latin America

    International Nuclear Information System (INIS)

    Miranda, Enrique Francisco Prietro

    2013-01-01

    The use of the radiation technology has gained acceptance in various regions of the world, where studies estimated that the installed capacity increases at a rate of 6 % per year and Latin America is part of this increase, due the advantages of this process when it is employed for the food preservation, sterilization of medical pharmaceutical material and to control the insect pests. This paper shows the art state of the application of Radiation Technology in Latin America, as well as the technological characteristics of the most gamma irradiation facilities and minor number the electron beam accelerator facilities, the types of irradiated products, state of the Quality Management System and the Dosimetric Systems used in the Radiation Processing Control in the Region. (author)

  8. Technology Reinvestment Program/Advanced ``Zero Emission'' Control Valve (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    J. Napoleon

    1998-12-01

    The objectives of this effort are to determine, develop and demonstrate the feasibility of significantly reducing the cost and expanding the applications for a family of Advanced Zero Emissions Control Valves that meets the fugitive emissions requirements of the 1990 Amendments to the Clean Air Act. This program is a direct technology spin-off from the valve technology that is critical to the US Navy's Nuclear Powered Fleet. These zero emissions valves will allow the Hydrocarbon and Chemical Processing Industries, etc., to maintain their competitiveness and still meet environmental and safety requirements. Phase 2 is directed at refining the basic technologies developed during Phase 1 so that they can be more readily selected and utilized by the target market. In addition to various necessary certifications, the project will develop a full featured digital controller with ``smart valve'' growth capability, expanding valve sizes/applications and identifying valve materials to permit applications in severe operational environments.

  9. REMOTE SYNTHESIS AND CONTROL INFORMATION TECHNOLOGY OF SYSTEM-DYNAMIC MODELS

    Directory of Open Access Journals (Sweden)

    A. V. Masloboev

    2015-07-01

    Full Text Available The general line of research is concerned with development of information technologies and computer simulation tools for management information and analytical support of complex semistructured systems. Regional socio-economic systems are consideredas a representative of this system type. Investigation is carried out within the bounds of development strategy implementation of the Arctic zone of the Russian Federation and national safety until 2020 in the Murmansk region, specifically under engineering of high end information infrastructure for innovation and security control problem-solving of regional development. Research methodology consists of system dynamics modeling method, distributed information system engineering technologies, pattern-based modeling and design techniques. The work deals with development of toolkit for decision-making information support problem-solving in the field of innovation security management of regional economics. For that purpose a system-dynamic models suite of innovation process standard components and information technology for remote formation and control of innovation business simulation models under research have been developed. Designed toolkit provides innovation security index dynamics forecasting and innovation business effectiveness of regional economics. Information technology is implemented within the bounds of thin client architecture and is intended for simulation models design process automation of complex systems. Technology implementation software tools provide pattern-based system-dynamic models distributed formation and simulation control of innovation processes. The technology provides availability and reusability index enhancement of information support facilities in application to innovation process simulation at the expense of distributed access to innovation business simulation modeling tools and model synthesis by the reusable components, simulating standard elements of innovation

  10. Application of neural network technology to fly-by-light control systems

    Science.gov (United States)

    Urnes, James M., Sr.

    1995-05-01

    McDonnell Douglas Aerospace (MDA) is developing a Neural Network based Intelligent Flight Control System that utilizes fly-by-light data transmission combined with high capacity flight processors to implement control advancements and fault monitoring processes. In this control system design, high speed data transfer and electromagnetic interference protection obtained through fiber optic technology is linked with Neural Network based flight control hardware processors that are programmed with damage adaptive control capability, thus providing maximum survivability for fighter aircraft. This system also provides enhanced component fault diagnostics that can identify subsystem failures during flight, thus providing reduced life cycle cost through efficient maintenance action and less downtime of the aircraft. The Intelligent Flight Control products apply to fighter and transport aircraft. This program is Task 2C of the ARPA Fly-by-Light Advanced Systems Hardware (FLASH) Technology Reinvestment Program. The principal partner with MDA for the Task 2C Intelligent Flight Control development is Martin Marietta Control Systems. The program will mature the system hardware and software for laboratory demonstrations of component fault diagnostics and highly adaptive flight control performance.

  11. Endogenous Monetary Policy Regime Change

    OpenAIRE

    Troy Davig; Eric M. Leeper

    2006-01-01

    This paper makes changes in monetary policy rules (or regimes) endogenous. Changes are triggered when certain endogenous variables cross specified thresholds. Rational expectations equilibria are examined in three models of threshold switching to illustrate that (i) expectations formation effects generated by the possibility of regime change can be quantitatively important; (ii) symmetric shocks can have asymmetric effects; (iii) endogenous switching is a natural way to formally model preempt...

  12. Fuzzy controllers and fuzzy expert systems: industrial applications of fuzzy technology

    Science.gov (United States)

    Bonissone, Piero P.

    1995-06-01

    We will provide a brief description of the field of approximate reasoning systems, with a particular emphasis on the development of fuzzy logic control (FLC). FLC technology has drastically reduced the development time and deployment cost for the synthesis of nonlinear controllers for dynamic systems. As a result we have experienced an increased number of FLC applications. In a recently published paper we have illustrated some of our efforts in FLC technology transfer, covering projects in turboshaft aircraft engine control, stream turbine startup, steam turbine cycling optimization, resonant converter power supply control, and data-induced modeling of the nonlinear relationship between process variable in a rolling mill stand. These applications will be illustrated in the oral presentation. In this paper, we will compare these applications in a cost/complexity framework, and examine the driving factors that led to the use of FLCs in each application. We will emphasize the role of fuzzy logic in developing supervisory controllers and in maintaining explicit the tradeoff criteria used to manage multiple control strategies. Finally, we will describe some of our FLC technology research efforts in automatic rule base tuning and generation, leading to a suite of programs for reinforcement learning, supervised learning, genetic algorithms, steepest descent algorithms, and rule clustering.

  13. Effect of peripheral vision control technology in the development of juvenile myopia

    Directory of Open Access Journals (Sweden)

    Jin-Ou Huang

    2015-02-01

    Full Text Available AIM:To investigate the effect of peripheral vision control technology for delaying the development of juvenile myopia.METHODS: A total of ninty-nine cases of 12~18 year-old myopic patients were randomly divided into two groups. The experimental group was peripheral vision control technology group whose members wore the special lenses which can help correct the hypermetropic defocus of peripheral retina. The other was control group whose members wore ordinary monofocal lenses. All the subjects needed to accept re-examination every 3mo and be recorded the data of dioptre, corneal curvature and axial length.RESULTS: After 18mo, the dioptre and axial length of two groups had increased in varying degree. But the data's different quantity of the corneal curvature in each group had no statistical significance(P>0.05. Themyopia deepen quantity in experimental group was -0.65±0.65D and its axial growth was 0.23±0.22mm, and the myopia deepen quantity in control group was -1.17±0.50D and its axial growth was 0.41±0.17mm. Under the circumstance of valid data, the increment of myopia and axial length in experimental group was lower than that in control group(PCONCLUSION: Peripheral vision control technology can delay the development of juvenile myopia effectively.

  14. Usability research study of a specially engineered sonic powered toothbrush with unique sensing and control technologies.

    Science.gov (United States)

    Hunter, Gail; Burns, Laurie; Bone, Brian; Mintel, Thomas; Jimenez, Eduardo

    2012-01-01

    This paper summarizes the results of a longitudinal usability research study of a specially engineered sonic powered toothbrush with unique sensing and control technologies. The usability test was conducted with fourteen (14) consumers from the St. Louis, MO, USA area who use manual toothbrushes. The study consisted of consumers using the specially engineered sonic powered toothbrush with unique sensing and control technologies for three weeks. During the study, users participated in four toothbrush trials during weekly visits to the research facility. These trials were videotaped and were analyzed regarding brushing time, behavior, and technique. In addition, the users were required to use the toothbrush twice a day for their at-home brushing. The toothbrush had a positive impact on consumers' tooth brushing behavior. Users spent more time brushing their teeth with this toothbrush as compared to their manual toothbrush. In addition, users spent more time keeping the sonic toothbrush in the recommended angle during use. Finally, users perceived their teeth to be cleaner when using the specially engineered sonic powered toothbrush with unique sensing and control technologies. The specially engineered sonic powered toothbrush with unique sensing and control technologies left a positive impression on the users. The users perceived the toothbrush to clean their teeth better than a manual toothbrush.

  15. Microcapsule Technology for Controlled Growth Factor Release in Musculoskeletal Tissue Engineering.

    Science.gov (United States)

    Della Porta, Giovanna; Ciardulli, Maria C; Maffulli, Nicola

    2018-06-01

    Tissue engineering strategies have relied on engineered 3-dimensional (3D) scaffolds to provide architectural templates that can mimic the native cell environment. Among the several technologies proposed for the fabrication of 3D scaffold, that can be attractive for stem cell cultivation and differentiation, moulding or bioplotting of hydrogels allow the stratification of layers loaded with cells and with specific additives to obtain a predefined microstructural organization. Particularly with bioplotting technology, living cells, named bio-ink, and additives, such as biopolymer microdevices/nanodevices for the controlled delivery of growth factors or biosignals, can be organized spatially into a predesigned 3D pattern by automated fabrication with computer-aided digital files. The technologies for biopolymer microcarrier/nanocarrier fabrication can be strategic to provide a controlled spatiotemporal delivery of specific biosignals within a microenvironment that can better or faster address the stem cells loaded within it. In this review, some examples of growth factor-controlled delivery by biopolymer microdevices/nanodevices embedded within 3D hydrogel scaffolds will be described, to achieve a bioengineered 3D interactive microenvironment for stem cell differentiation. Conventional and recently proposed technologies for biopolymer microcapsule fabrication for controlled delivery over several days will also be illustrated and critically discussed.

  16. Environmental control technology for mining and milling low-grade uranium resources

    International Nuclear Information System (INIS)

    Weakley, S.A.; Blahnik, D.E.; Long, L.W.; Bloomster, C.H.

    1981-04-01

    This study examined the type and level of wastes that would be generated in the mining and milling of U 3 O 8 from four potential domestic sources of uranium. The estimated costs of the technology to control these wastes to different degrees of stringency are presented

  17. TEST DESIGN FOR ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) OF ADD-ON NOX CONTROL UTILIZING OZONE INJECTION

    Science.gov (United States)

    The paper discusses the test design for environmental technology verification (ETV) of add-0n nitrogen oxides (NOx) control utilizing ozone injection. (NOTE: ETV is an EPA-established program to enhance domestic and international market acceptance of new or improved commercially...

  18. Environmental control technology for mining and milling low-grade uranium resources

    Energy Technology Data Exchange (ETDEWEB)

    Weakley, S.A.; Blahnik, D.E.; Long, L.W.; Bloomster, C.H.

    1981-04-01

    This study examined the type and level of wastes that would be generated in the mining and milling of U/sub 3/O/sub 8/ from four potential domestic sources of uranium. The estimated costs of the technology to control these wastes to different degrees of stringency are presented.

  19. 75 FR 22548 - Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...

    Science.gov (United States)

    2010-04-29

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 63 [EPA-HQ-OAR-2009-0746; FRL-9143-3] RIN 2060-AP91 Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air Act Sections... Clean Air Act. We are announcing an extension of the public comment period to May 27, 2010. DATES...

  20. Mixed Waste Management Facility (MWMF) Old Burial Ground (OBG) source control technology and inventory study

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G.P.; Rehder, T.E.; Kanzleiter, J.P.

    1996-10-02

    This report has been developed to support information needs for wastes buried in the Burial Ground Complex. Information discussed is presented in a total of four individual attachments. The general focus of this report is to collect information on estimated source inventories, leaching studies, source control technologies, and to provide information on modeling parameters and associated data deficiencies.

  1. Mixed Waste Management Facility (MWMF) Old Burial Ground (OBG) source control technology and inventory study

    International Nuclear Information System (INIS)

    Flach, G.P.; Rehder, T.E.; Kanzleiter, J.P.

    1996-01-01

    This report has been developed to support information needs for wastes buried in the Burial Ground Complex. Information discussed is presented in a total of four individual attachments. The general focus of this report is to collect information on estimated source inventories, leaching studies, source control technologies, and to provide information on modeling parameters and associated data deficiencies

  2. 78 FR 37570 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Notice of...

    Science.gov (United States)

    2013-06-21

    ... Interactive Program Guide and Parental Control Technology; Notice of Request for Statements on the Public... Bonding in the above-captioned investigation. The ALJ found no violation in this investigation, however... exclude the articles concerned from the United States: unless, after considering the effect of such...

  3. High social impact of medical applications in nuclear technology: gynecological brachitherapy remote control in Uruguay

    International Nuclear Information System (INIS)

    Zubizarreta, E.

    1996-01-01

    In the present article is studied many systems for uterine carcinoma therapy. Among modern therapy systems it was found Fletcher applicator compound with Cesium and Iridium sources. This new technology by remote control has improved radioprotection levels in the exposition workers and disappear radioactive sources mislead, increasing sources activities and decreasing the exposition time

  4. Application of Combined Electronic Nose and Tongue Technology in Petfood Flavor Development and Quality Control

    Science.gov (United States)

    Oladipupo, Bola; Stough, Jean; Guthrie, Nicky

    2011-09-01

    This work demonstrates the use of combined Electronic Nose and Tongue (ENT) technology in pet food flavor development and quality control. ENT with multivariate data analysis was used to effectively screen multiple flavor formulations during development, discriminate Off the Shelf (OTS) kibbles from different plants, and assess the quality of finished flavors; with good correlation to animal sensory results.

  5. Demonstration of robust micromachined jet technology and its application to realistic flow control problems

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Sung Pil [Inha University, Incheon (Korea, Republic of)

    2006-04-15

    This paper describes the demonstration of successful fabrication and initial characterization of micromachined pressure sensors and micromachined jets (microjets) fabricated for use in macro flow control and other applications. In this work, the microfabrication technology was investigated to create a micromachined fluidic control system with a goal of application in practical fluids problems, such as UAV (Unmanned Aerial Vehicle)-scale aerodynamic control. Approaches of this work include : (1) the development of suitable micromachined synthetic jets (microjets) as actuators, which obviate the need to physically extend micromachined structures into an external flow ; and (2) a non-silicon alternative micromachining fabrication technology based on metallic substrates and lamination (in addition to traditional MEMS technologies) which will allow the realization of larger scale, more robust structures and larger array active areas for fluidic systems. As an initial study, an array of MEMS pressure sensors and an array of MEMS modulators for orifice-based control of microjets have been fabricated, and characterized. Both pressure sensors and modulators have been built using stainless steel as a substrate and a combination of lamination and traditional micromachining processes as fabrication technologies.

  6. Environmental control technology activities of the Department of Energy in FY 1977

    International Nuclear Information System (INIS)

    1977-11-01

    The Department of Energy is responsible for the research, development, and demonstration of emerging energy technologies and the promotion of energy conservation. An integral and significant part of that responsibility includes the balancing of energy goals with environmental requirements to protect and enhance the general health, safety, and welfare of the nation. This requires that environmental effects be considered and mitigating measures be taken in all energy processes through incorporation of environmental and safety controls which are developed as an integral part of energy system design. This inventory of environmental control technology activities was initiated by the Administrator, ERDA, prior to the incorporation of that administration within the Department of Energy. This compilation of total Energy Research and Development Administration (ERDA) environmental control technology activities, and associated funding, related to environmental control technology identifies the resources committed by ERDA to demonstrate its objective to protect and enhance the general health, safety, and welfare of the nation in the research, development, and demonstration of energy systems. Only ERDA research, development, and demonstration activities are covered in this report. The compilation for FY 1978 will encompass all of the DOE activities

  7. 77 FR 26786 - Certain Products Containing Interactive Program and Parental Control Technology; Notice of...

    Science.gov (United States)

    2012-05-07

    ... parental control technology. The complaint names as respondents LG Electronics, Inc. of Korea; LG Electronics U.S.A., Inc. of NJ; Mitsubishi Electric Corp. of Japan; Mitsubishi Electric US Holdings, Inc. of CA; Mitsubishi Electric and Electronics USA, Inc.; Mitsubishi Electric Visual Solutions America, Inc...

  8. Study on the application of intelligent control technology in the financial system

    Science.gov (United States)

    Chen, Liyu; Chen, Qiang

    2011-02-01

    By comprehensively using the intelligent control theory, this paper has discussed key technologies such as the architectural design of the financial intelligent system and the design of the intelligent analysis model and template. It has also conducted exploratory research on the theoretical framework, design and development of financial intelligent software.

  9. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study

    Science.gov (United States)

    1982-01-01

    The Current and Advanced Technology ACT control system definition tasks of the Integrated Application of Active Controls (IAAC) Technology project within the Energy Efficient Transport Program are summarized. The systems mechanize six active control functions: (1) pitch augmented stability; (2) angle of attack limiting; (3) lateral/directional augmented stability; (4) gust load alleviation; (5) maneuver load control; and (6) flutter mode control. The redundant digital control systems meet all function requirements with required reliability and declining weight and cost as advanced technology is introduced.

  10. Subsystem of the technological process on-line control system for control of analog monitor indication reliability

    International Nuclear Information System (INIS)

    Vajshnis, P.P.; Druba, V.V.; Reznik, V.R.; Titov, S.I.

    1989-01-01

    Results of experimental determination of quantitative relations between process parameters obtained during the Kola-4 NPP start-up are given. Coefficients included in the system of algebraic equations describing real stationary precesses of heat transfer in the core and steam generator, as well as transformation of primary circuit coolant energy into energy of steam and subsequent electric power generation in turbine generators are obtained. The data are used for on-line control of reliability of information provided by monitors of technological process on-line control system. 2 refs.; 5 figs

  11. Transition from weak wave turbulence regime to solitonic regime

    Science.gov (United States)

    Hassani, Roumaissa; Mordant, Nicolas

    2017-11-01

    The Weak Turbulence Theory (WTT) is a statistical theory describing the interaction of a large ensemble of random waves characterized by very different length scales. For both weak non-linearity and weak dispersion a different regime is predicted where solitons propagate while keeping their shape unchanged. The question under investigation here is which regime between weak turbulence or soliton gas does the system choose ? We report an experimental investigation of wave turbulence at the surface of finite depth water in the gravity-capillary range. We tune the wave dispersion and the level of nonlinearity by modifying the depth of water and the forcing respectively. We use space-time resolved profilometry to reconstruct the deformed surface of water. When decreasing the water depth, we observe a drastic transition between weak turbulence at the weakest forcing and a solitonic regime at stronger forcing. We characterize the transition between both states by studying their Fourier Spectra. We also study the efficiency of energy transfer in the weak turbulence regime. We report a loss of efficiency of angular transfer as the dispersion of the wave is reduced until the system bifurcates into the solitonic regime. This project has recieved funding from the European Research Council (ERC, Grant Agreement No. 647018-WATU).

  12. Bridging the gap: adapting advanced display technologies for use in hybrid control rooms

    Energy Technology Data Exchange (ETDEWEB)

    Jokstad, Håkon [Inst. for Energy Technology, Halden (Norway); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-02-01

    The Institute for Energy Technology (IFE), runs the OECD Halden Reactor Project (HRP), featuring a state-of-the-art research simulator facility in Halden, Norway, called HAMMLAB. HAMMLAB serves two main purposes: the study of human behaviour in interaction with complex process systems; and the development, test and evaluation of prototype control centres and their individual systems. By studying operator performance in HAMMLAB and integrating the knowledge gained into new designs, the HRP contributes to improving operational safety, reliability, efficiency and productivity. The U.S. Department of Energy’s (DOE) Light Water Reactor Sustainability (LWRS) Program has contracted IFE to assist DOE national laboratory staff at Idaho National Laboratory (INL) in adapting HAMMLAB design concepts for the purpose of control room modernization at nuclear power plants in the U.S. In support of this effort, the DOE has built a simulator research facility at INL called the Human Systems Simulation Laboratory (HSSL). The HSSL is centered on control room modernization, in which industry provided plant instrumentation and controls are modified for upgrade opportunities. The HSSL houses the LWRS simulator, which is a reconfigurable full-scale and full-scope control room simulator. Consisting of 45 large touchscreens on 15 panels, the LWRS simulator is currently using this glass top technology to digitally represent and replicate the functionality of the analog I&C systems in existing control rooms. The LWRS simulator is reconfigurable in that different plant training simulator models obtained from the utilities can be run on the panels, and the panels can be physically moved and arranged to mimic the layout of those control rooms. The glass top technology and reconfigurability capabilities allow the LWRS simulator to be the research platform that is necessary to design, prototype, and validate human-system interface (HSI) technologies that can replace existing analog I&C. IFE has

  13. Bridging the gap: adapting advanced display technologies for use in hybrid control rooms

    International Nuclear Information System (INIS)

    Jokstad, Håkon; Boring, Ronald

    2015-01-01

    The Institute for Energy Technology (IFE), runs the OECD Halden Reactor Project (HRP), featuring a state-of-the-art research simulator facility in Halden, Norway, called HAMMLAB. HAMMLAB serves two main purposes: the study of human behaviour in interaction with complex process systems; and the development, test and evaluation of prototype control centres and their individual systems. By studying operator performance in HAMMLAB and integrating the knowledge gained into new designs, the HRP contributes to improving operational safety, reliability, efficiency and productivity. The U.S. Department of Energy's (DOE) Light Water Reactor Sustainability (LWRS) Program has contracted IFE to assist DOE national laboratory staff at Idaho National Laboratory (INL) in adapting HAMMLAB design concepts for the purpose of control room modernization at nuclear power plants in the U.S. In support of this effort, the DOE has built a simulator research facility at INL called the Human Systems Simulation Laboratory (HSSL). The HSSL is centered on control room modernization, in which industry provided plant instrumentation and controls are modified for upgrade opportunities. The HSSL houses the LWRS simulator, which is a reconfigurable full-scale and full-scope control room simulator. Consisting of 45 large touchscreens on 15 panels, the LWRS simulator is currently using this glass top technology to digitally represent and replicate the functionality of the analog I&C systems in existing control rooms. The LWRS simulator is reconfigurable in that different plant training simulator models obtained from the utilities can be run on the panels, and the panels can be physically moved and arranged to mimic the layout of those control rooms. The glass top technology and reconfigurability capabilities allow the LWRS simulator to be the research platform that is necessary to design, prototype, and validate human-system interface (HSI) technologies that can replace existing analog I&C. IFE

  14. Evaluation of information technology impact on effective internal control in the University system

    International Nuclear Information System (INIS)

    Sanusi Fasilat, A.; Hassan, Haslinda

    2015-01-01

    Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery

  15. Control technology for integrated circuit fabrication at Micro-Circuit Engineering, Incorporated, West Palm Beach, Florida

    Science.gov (United States)

    Mihlan, G. I.; Mitchell, R. I.; Smith, R. K.

    1984-07-01

    A survey to assess control technology for integrated circuit fabrication was conducted. Engineering controls included local and general exhaust ventilation, shielding, and personal protective equipment. Devices or work stations that contained toxic materials that were potentially dangerous were controlled by local exhaust ventilation. Less hazardous areas were controlled by general exhaust ventilation. Process isolation was used in the plasma etching, low pressure chemical vapor deposition, and metallization operations. Shielding was used in ion implantation units to control X-ray emissions, in contact mask alignes to limit ultraviolet (UV) emissions, and in plasma etching units to control radiofrequency and UV emissions. Most operations were automated. Use of personal protective equipment varied by job function.

  16. Evaluation of information technology impact on effective internal control in the University system

    Energy Technology Data Exchange (ETDEWEB)

    Sanusi Fasilat, A., E-mail: Fasilat17@gmail.com; Hassan, Haslinda, E-mail: lynn@uum.edu.my [School of Accountancy, College of Business, Universiti Utara Malaysia, Sintok, Kedah (Malaysia)

    2015-12-11

    Information Technology (IT) plays a key role in internal control system in various organizations in terms of maintaining records and other internal services. Internal control system is defined as an efficient control procedures set up by firm to safeguard resources and to assure the reliability and accuracy of both financial and non-financial records in line with applicable governance and procedure to acquire the established goal and objectives. This paper focuses on the impact of IT on internal control system in the Nigerian universities. Data are collected from three different universities via questionnaire. Descriptive statistics is used to analyze the data; Chi-square is performed to test the hypothesis. The results of the hypothesis showed that IT has a positive relationship with the effective internal control activities in the University system. It is concluded that the adoption of IT will significantly improve the effectiveness of the internal control system operations in the University in terms of quality service delivery.

  17. Ethylene Control Technologies in Extending Postharvest Shelf Life of Climacteric Fruit.

    Science.gov (United States)

    Zhang, Junhua; Cheng, Dong; Wang, Baobin; Khan, Iqbal; Ni, Yonghao

    2017-08-30

    Fresh fruit is important for a healthy diet. However, because of their seasonal production, regional specific cultivation, and perishable nature, it is essential to develop preservation technologies to extend the postharvest shelf life of fresh fruits. Climacteric fruit adopt spoilage because of ethylene, a key hormone associated with the ripening process. Therefore, controlling ethylene activity by following safe and effective approaches is a key to extend the postharvest shelf life of fruit. In this review, ethylene control technologies will be discussed aiming for the need of developing more innovative and effective approaches. The biosynthesis pathway will be given first. Then, the technologies determining the postharvest shelf life of climacteric fruit will be described with special attention to the latest and significant published works in this field. Special attention is given to 1-methylcyclopropene (1-MCP), which is effective in fruit preservation technologies. Finally, the encapsulation technology to improve the stability of 1-MCP will be proposed, using a potential encapsulation agent of 1-MCP, calixarene.

  18. Conventional forces and arms control: Technology and strategy in a changing world

    Energy Technology Data Exchange (ETDEWEB)

    Pilat, J.F.; White, P.C.

    1990-06-01

    To address the implications of changes for future roles of conventional forces and to assess the technology implications of future strategies, force requirements, and conventional arms control agreements, the Center for National Security Studies in cooperation with the Defense Research and Applications Directorate of the Los Alamos National Laboratory held a conference on Conventional Forces and Arms Control: Technology and Strategy in a Changing World'' at Los Alamos from September 25--27, 1989. The distinguished participants from government, industry, and academia in the United States and Western Europe addressed such issues as: What are the implications of geopolitical and technological trends for international security and stability How will these global changes affect US and allied strategies and force structure, especially the requirements for conventional, nonnuclear forces What will be the role of and rationale for conventional forces in the context of current and prospective allied security requirements How can the West assure it will have the forces necessary for its security How will technological developments influence the structure of tomorrow's conventional forces What impacts will arms reductions have on future systems and force structures What are the prospects for the development and deployment in weapon systems of future conventional military technologies, in light of existing and potential political, economic, bureaucratic, and other impediments

  19. Collaboration Technologies and the Supervisory Control of UCAVS in Tactical C2: Effects on Performance and Workload

    National Research Council Canada - National Science Library

    Funke, Gregory J; Bennett, April M; Nelson, W. T; Galster, Scott M

    2007-01-01

    The present study was an initial attempt to characterize team performance, workload, and situational awareness associated with two types of UCAV control schemes coupled with several collaboration technologies...

  20. Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines.

    Science.gov (United States)

    Zhou, Lu-Jie; Cao, Qing-Gui; Yu, Kai; Wang, Lin-Lin; Wang, Hai-Bin

    2018-04-26

    This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines.

  1. Use of 2.5-D and 3-D technology to evaluate control room upgrades

    International Nuclear Information System (INIS)

    Hanes, L. F.; Naser, J.

    2006-01-01

    This paper describes an Electric Power Research Inst. (EPRI) study in which 2.5-D and 3-D visualization technology was applied to evaluate the design of a nuclear power plant control room upgrade. The study involved converting 3-D CAD flies of a planned upgrade into a photo-realistic appearing virtual model, and evaluating the value and usefulness of the model. Nuclear utility and EPRI evaluators viewed and interacted with the control room virtual model with both 2.5-D and 3-D representations. They identified how control room and similar virtual models may be used by utilities for design and evaluation purposes; assessed potential economic and other benefits; and identified limitations, potential problems, and other issues regarding use of visualization technology for this and similar applications. In addition, the Halden CREATE (Control Room Engineering Advanced Tool-kit Environment) Verification Tool was applied to evaluate features of the virtual model against US NRC NUREG 0700 Revision 2 human factors engineering guidelines (NUREG 0700) [1]. The study results are very favorable for applying 2.5-D visualization technology to support upgrading nuclear power plant control rooms and other plant facilities. Results, however, show that today's 3-D immersive viewing systems are difficult to justify based on cost, availability and value of information provided for this application. (authors)

  2. Optimization of technology and boiler control to improve economical and environmental parameters

    Energy Technology Data Exchange (ETDEWEB)

    Stosek, V.; Neuman, P.; Mechura, V.; Masek, Z. [EGU Prague (Czechoslovakia)

    1995-12-01

    For cutting emissions NO{sub x} and CO in the Czech Republic are mostly applied primary measurers. At the same time measuring and control systems are innovated. Analog control systems are replaced by digital and computer network is developed in the power energy generation. It enables application of sophisticated information and diagnostic systems. It is shown how the EGU designs modification of technology equipment, measurement and control systems to increase efficiency and cut NO{sub x} emission levels at 110 MWe units at Prunerov power station and 200 MWe units at Tusimice before and after reconstruction are presented.

  3. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  4. Parallel superconducting strip-line detectors: reset behaviour in the single-strip switch regime

    International Nuclear Information System (INIS)

    Casaburi, A; Heath, R M; Tanner, M G; Hadfield, R H; Cristiano, R; Ejrnaes, M; Nappi, C

    2014-01-01

    Superconducting strip-line detectors (SSLDs) are an important emerging technology for the detection of single molecules in time-of-flight mass spectrometry (TOF-MS). We present an experimental investigation of a SSLD laid out in a parallel configuration, designed to address selected single strip-lines operating in the single-strip switch regime. Fast laser pulses were tightly focused onto the device, allowing controllable nucleation of a resistive region at a specific location and study of the subsequent device response dynamics. We observed that in this regime, although the strip-line returns to the superconducting state after triggering, no effective recovery of the bias current occurs, in qualitative agreement with a phenomenological circuit simulation that we performed. Moreover, from theoretical considerations and by looking at the experimental pulse amplitude distribution histogram, we have the first confirmation of the fact that the phenomenological London model governs the current redistribution in these large area devices also after detection events. (paper)

  5. Parallel superconducting strip-line detectors: reset behaviour in the single-strip switch regime

    Science.gov (United States)

    Casaburi, A.; Heath, R. M.; Tanner, M. G.; Cristiano, R.; Ejrnaes, M.; Nappi, C.; Hadfield, R. H.

    2014-04-01

    Superconducting strip-line detectors (SSLDs) are an important emerging technology for the detection of single molecules in time-of-flight mass spectrometry (TOF-MS). We present an experimental investigation of a SSLD laid out in a parallel configuration, designed to address selected single strip-lines operating in the single-strip switch regime. Fast laser pulses were tightly focused onto the device, allowing controllable nucleation of a resistive region at a specific location and study of the subsequent device response dynamics. We observed that in this regime, although the strip-line returns to the superconducting state after triggering, no effective recovery of the bias current occurs, in qualitative agreement with a phenomenological circuit simulation that we performed. Moreover, from theoretical considerations and by looking at the experimental pulse amplitude distribution histogram, we have the first confirmation of the fact that the phenomenological London model governs the current redistribution in these large area devices also after detection events.

  6. Assessment of environmental control technologies for Koppers-Totzek, Winkler, and Texaco coal gasification systems

    Energy Technology Data Exchange (ETDEWEB)

    Mudge, L.K.; Sealock, L.J. Jr.

    1979-09-01

    The US Department of Energy, Division of Environmental Control Technology, supports the Assistant Secretary for Environment in discharging responsibilities for environmental control aspects of technology in use and development. The coal gasification technologies employed by Winkler, Koppers-Totzek (K-T) and Texaco are described. Evaluation of the status of these technologies for control of major environmental pollutants indicates that a minimum risk to the environment is involved. The complete gasification process involves coal storage, coal preparation, gasification, gas cooling, particulate removal, acid gas cleanup, shift conversion, oxygen manufacture, cleanup of waste water and makeup water, and utility operation. The status of each of these technologies with respect to environmental acceptability is discussed. Very little is known about the behavior of trace elements in the K-T, Texaco and Winkler gasification systems. Airborne emissions of trace elements can occur from the utility boiler, and from wind entrainment of discharged residue and stored coal. Ash components are discharged from the gasification processes with gasifier residues and gas-cleanup sludges and residues. The trace element composition of coal is geochemically similar to the makeup of the earth's crust and includes almost all of the elements of the periodic table. The potential hazard from emissions of trace elements is mainly from long-term, low-level exposures to increased atmospheric pollution levels. Discharges from the K-T, Texaco and Winkler processes can be expected to have very minor contributions to atmospheric pollution levels of trace elements. Table 1 summarizes the status of technology and data needs for the different processing steps. The different process areas and their potential for intrusion of the environment are discussed.

  7. Engineering Related Technology: A Laboratory and Curriculum Design for the Newly Emerging Technology of Pollution-Corrosion Measurement and Control. Final Report.

    Science.gov (United States)

    Shields, F. K.; And Others

    In order to meet the educational needs for a separate curriculum at the secondary level for technological training related to pollution and corrosion measurement and control, a 3-year, 1080-hour vocational program was developed for use in an area vocational high school. As one of four programs in the technology careers area, this curriculum design…

  8. Development of Adaptive Acoustic Impedance Control Technologies of Acoustic Duct Liner

    Directory of Open Access Journals (Sweden)

    Hiroshi Kobayashi

    2011-01-01

    Full Text Available This paper describes the development of adaptive acoustic impedance control (AAC technologies to achieve a larger fan noise reduction, by adaptively adjusting reactance and resistance of the acoustic liner impedance. For the actual proof of the AAC technology III performance, the advanced fan noise absorption control duct liner II was made on trial basis, with the simple control system and the plain device. And, then, the duct liner II was examined for the AAC technology I, II, and III models, using the high speed fan test facility. The test results made clear that the duct liner II of the AAC technology III model could achieve the fan noise reduction higher than O.A. SPL 10 dB (A at the maximum fan speed 6000 rpm, containing the reduction of fundamental BPF tone of 18 dB and 2nd BPF tone of 10 dB in response to the fan peed change from 3000 to 6000 rpm.

  9. Technologies for tritium control in fission reactors moderated with heavy water

    International Nuclear Information System (INIS)

    Ramilo, L.B.; Gomez de Soler, S.M.

    1996-01-01

    This study was done within a program one of whose objectives was to analyze the possible strategies and technologies, to be applied to HWR at Argentine nuclear power plants, for tritium control. The high contribution of tritium to the total dose has given rise to the need by the operators and/or designers to carry out developments and improvements to try to optimize tritium control technologies. Within a tritium control program, only that one which includes the heavy water detritiation will allow to reduce the tritium concentrations at optimum levels for safety and cost-effective power plant operation. The technology chosen to be applied should depend not only on the technical feasibility but also on the analysis of economic and juncture factors such as, among others, the quantity of heavy water to be treated. It is the authors' belief that AECL tendency concerning heavy water treatment in its future reactors would be to employ the CECE technology complemented with immobilization on titanium beds, with the 'on-line' detritiation in each nuclear power plant. This would not be of immediate application since our analysis suggests that AECL would assume that the process is under development and needs to be tested. (author). 21 refs

  10. Improving the Multi-Objective Performance of Rainwater Harvesting Systems Using Real-Time Control Technology

    Directory of Open Access Journals (Sweden)

    Wei D. Xu

    2018-02-01

    Full Text Available Many studies have identified the potential of rainwater harvesting (RWH systems to simultaneously augment potable water supply and reduce delivery of uncontrolled stormwater flows to downstream drainage networks. Potentially, such systems could also play a role in the controlled delivery of water to urban streams in ways which mimic baseflows. The performance of RWH systems to achieve these three objectives could be enhanced using Real-Time Control (RTC technology to receive rainfall forecasts and initiate pre-storm release in real time, although few studies have explored such potential. We used continuous simulation to model the ability of a range of allotment-scale RWH systems to simultaneously deliver: (i water supply; (ii stormwater retention; and (iii baseflow restoration. We compared the performance of RWH systems with RTC technology to conventional RWH systems and also systems designed with a passive baseflow release, rather than the active (RTC configuration. We found that RWH systems employing RTC technology were generally superior in simultaneously achieving water supply, stormwater retention and baseflow restoration benefits compared with the other types of system tested. The active operation provided by RTC allows the system to perform optimally across a wider range of climatic conditions, but needs to be carefully designed. We conclude that the active release mechanism employing RTC technology exhibits great promise; its ability to provide centralised control and failure detection also opens the possibility of delivering a more reliable rainwater harvesting system, which can be readily adapted to varying climate over both the short and long term.

  11. The optomechanical instability in the quantum regime

    Energy Technology Data Exchange (ETDEWEB)

    Ludwig, Max; Kubala, Bjoern; Marquardt, Florian [Department fuer Physik, Arnold Sommerfeld Center for Theoretical Physics, and Center for NanoScience, Ludwig-Maximilians-Universitaet Muenchen, Theresienstr 37, D-80333 Muenchen (Germany)], E-mail: max.ludwig@physik.lmu.de

    2008-09-15

    We consider a generic optomechanical system, consisting of a driven optical cavity and a movable mirror attached to a cantilever. Systems of this kind (and analogues) have been realized in many recent experiments. It is well known that these systems can exhibit an instability towards a regime where the cantilever settles into self-sustained oscillations. In this paper, we briefly review the classical theory of the optomechanical instability, and then discuss the features arising in the quantum regime. We solve numerically a full quantum master equation for the coupled system, and use it to analyze the photon number, the cantilever's mechanical energy, the phonon probability distribution and the mechanical Wigner density, as a function of experimentally accessible control parameters. When a suitable dimensionless 'quantum parameter' is sent to zero, the results of the quantum mechanical model converge towards the classical predictions. We discuss this quantum-to-classical transition in some detail.

  12. Analytic models of CMOS logic in various regimes

    Directory of Open Access Journals (Sweden)

    Dokić Branko

    2014-01-01

    Full Text Available In this paper, comparative analytic models of static and dynamic characteristics of CMOS digital circuits in strong, weak and mixed inversion regime have been described. Term mixed inversion is defined for the first time. The paper shows that there is an analogy in behavior and functional dependencies of parameters in all three CMOS regimes. Comparative characteristics of power consumption and speed in static regimes are given. Dependency of threshold voltage and logic delay time on temperature has been analyzed. Dynamic model with constant current is proposed. It is shown that digital circuits with dynamic threshold voltage of MOS transistor (DT-CMOS have better logic delay characteristics. The analysis is based on simplified current-voltage MOS transistor models in strong and weak inversion regimes, as well as PSPICE software using 180 nm technology parameters.

  13. RA research nuclear reactor operation in forced regime, Annex 5

    International Nuclear Information System (INIS)

    Mitrovic, S.

    1964-01-01

    In order to increase the flux and experimental potentials of the RA reactor, properties of the reactor operating in the forced regime have been inspected four times, twice with the spent fuel (core C), and twice with partly fresh fuel (cores E and F). Forced regime means power higher than nominal 6.5 MW. From the analyses of technology parameters during operation in the forced regime at power levels of 7 and 11 MW, state and behaviour of the components, efficiency of the biological protection and other parameters it was concluded that the reactor operation is possible at power levels of 10 MW during a whole year, and under certain conditions even longer operation at power levels up to 15 MW. This paper examines the reactor operation conditions in the forced regime and gives conclusions related to real increase of the experimental possibilities, isotope production and economic factors [sr

  14. New trends of activity on supporting of non-proliferation regime

    International Nuclear Information System (INIS)

    Issaeva, G.M.; Tyupkina, O.G.

    2002-01-01

    Taking into account the necessity of all possible strengthening of non-proliferation regimes Kazakhstan participates in a number of agreements and associations: Nuclear Non-proliferation Treaty, Comprehensive Test-Ban-Treaty, International Atomic Energy Agency, Nuclear Supplier Group, Missile Technology Control Regime, Conference on Disarmament, etc. The Cooperative Threat Reduction Program (CTR) greatly influenced on the development on non-proliferation regime in Kazakhstan. During initial stage of CTR activity (1993-1995) military projects prevailed. Later (1995-1997) the projects on liquidation of infrastructure for nuclear and bio- weapons were successfully realized. Last years, since 1999, the attention was shifted towards proliferation prevention of hazardous nuclear and biological materials. Recent terrorist acts and world community activity on global safety strengthening underline an urgency of quite new problems that entirely applied to Kazakhstan: monitoring of hazardous materials; enhancement of safety systems of 'risky' facilities and technologies; creation and/or upgrading of safety systems for industry infrastructure. The proposals of these new trends of non-proliferation have been developed. Development of physical protection system for oil and gas industry infrastructure of Kazakhstan based on safety concepts of nuclear facilities; Evaluation of radionuclide contamination and safety of oil and gas facilities of the Caspian region; Counteraction to nuclear materials proliferation; Cooperative approaches in preventing/reducing of illicit trafficking and use of WMD-related explosive materials. Implementation of the project would make of substantial contribution to successful solution of either regional or global safety problem

  15. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study. Volume 2: Appendices

    Science.gov (United States)

    Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

    1981-01-01

    The current status of the Active Controls Technology (ACT) for the advanced subsonic transport project is investigated through analysis of the systems technical data. Control systems technologies under examination include computerized reliability analysis, pitch axis fly by wire actuator, flaperon actuation system design trade study, control law synthesis and analysis, flutter mode control and gust load alleviation analysis, and implementation of alternative ACT systems. Extensive analysis of the computer techniques involved in each system is included.

  16. Suitability of Agent Technology for Military Command and Control in the Future Combat System Environment

    Energy Technology Data Exchange (ETDEWEB)

    Potok, TE

    2003-02-13

    The U.S. Army is faced with the challenge of dramatically improving its war fighting capability through advanced technologies. Any new technology must provide significant improvement over existing technologies, yet be reliable enough to provide a fielded system. The focus of this paper is to assess the novelty and maturity of agent technology for use in the Future Combat System (FCS). The FCS concept represents the U.S. Army's ''mounted'' form of the Objective Force. This concept of vehicles, communications, and weaponry is viewed as a ''system of systems'' which includes net-centric command and control (C{sup 2}) capabilities. This networked C{sup 2} is an important transformation from the historically centralized, or platform-based, C{sup 2} function since a centralized command architecture may become a decision-making and execution bottleneck, particularly as the pace of war accelerates. A mechanism to ensure an effective network-centric C{sup 2} capacity (combining intelligence gathering and analysis available at lower levels in the military hierarchy) is needed. Achieving a networked C{sup 2} capability will require breakthroughs in current software technology. Many have proposed the use of agent technology as a potential solution. Agents are an emerging technology, and it is not yet clear whether it is suitable for addressing the networked C{sup 2} challenge, particularly in satisfying battlespace scalability, mobility, and security expectations. We have developed a set of software requirements for FCS based on military requirements for this system. We have then evaluated these software requirements against current computer science technology. This analysis provides a set of limitations in the current technology when applied to the FCS challenge. Agent technology is compared against this set of limitations to provide a means of assessing the novelty of agent technology in an FCS environment. From this analysis we

  17. Legal framework of the environmental regulatory regime

    International Nuclear Information System (INIS)

    Black, D.

    1992-01-01

    The growing concern regarding environmental issues has presented a number of new challenges to those exploring and developing the hydrocarbon reserves located on the Newfoundland continental shelf. Not the least of these challenges is the development of new technologies in the harsh environment of the North Atlantic; in addition, these new technologies must be implemented in an existing and ever-changing regulatory regime. The legal framework of the environmental regulatory regime relating to offshore development in Canada is reviewed along with some of the more important legislation involved in regulating environmental issues in the offshore area. The legal basis for exploration, development, and management of resources located on the Newfoundland continental shelf is the Canada-Newfoundland Accord on Joint Management of Offshore Oil and Gas Resources off Newfoundland and Labrador. Administration of the Accord is the responsibility of the Canada-Newfoundland Offshore Petroleum Board. To be able to apply Canadian laws to the continental shelf, legislation was passed including the Canadian Laws Offshore Application Act as well as the Act implementing the Accord. The latter gives the Offshore Petroleum Board authority to regulate all stages involved in bringing an oil pool to production, such as granting of licenses and work authorizations. Granting of such licenses and authorizations is subject to compliance with environmental requirements, and there are provisions against certain environmental offenses such as spills. Other federal legislation applicable to the offshore includes the Canada Shipping Act and the Canadian Environmental Protection Act

  18. Two Persons with Multiple Disabilities Use Camera-Based Microswitch Technology to Control Stimulation with Small Mouth and Eyelid Responses

    Science.gov (United States)

    Lancioni, Giulio E.; Bellini, Domenico; Oliva, Doretta; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Lang, Russell

    2012-01-01

    Background: A camera-based microswitch technology was recently developed to monitor small facial responses of persons with multiple disabilities and allow those responses to control environmental stimulation. This study assessed such a technology with 2 new participants using slight variations of previous responses. Method: The technology involved…

  19. Diabetes Technology: Markers, Monitoring, Assessment, and Control of Blood Glucose Fluctuations in Diabetes

    Directory of Open Access Journals (Sweden)

    Boris P. Kovatchev

    2012-01-01

    Full Text Available People with diabetes face a life-long optimization problem: to maintain strict glycemic control without increasing their risk for hypoglycemia. Since the discovery of insulin in 1921, the external regulation of diabetes by engineering means has became a hallmark of this optimization. Diabetes technology has progressed remarkably over the past 50 years—a progress that includes the development of markers for diabetes control, sophisticated monitoring techniques, mathematical models, assessment procedures, and control algorithms. Continuous glucose monitoring (CGM was introduced in 1999 and has evolved from means for retroactive review of blood glucose profiles to versatile reliable devices, which monitor the course of glucose fluctuations in real time and provide interactive feedback to the patient. Technology integrating CGM with insulin pumps is now available, opening the field for automated closed-loop control, known as the artificial pancreas. Following a number of in-clinic trials, the quest for a wearable ambulatory artificial pancreas is under way, with a first prototype tested in outpatient setting during the past year. This paper discusses key milestones of diabetes technology development, focusing on the progress in the past 10 years and on the artificial pancreas—still not a cure, but arguably the most promising treatment of diabetes to date.

  20. Procedures for identifying reasonably available control technology for stationary sources of PM-10. Final report

    International Nuclear Information System (INIS)

    Fitzpatrick, M.J.; Ellefson, R.

    1992-09-01

    The guidance document sets forth procedures and identifies sources of information that will assist State and local air pollution control agencies in determining Reasonably Available Control Technology (RACT) for PM-10 (particulate matter having a nominal aerometric diameter of 10 microns or less) emission from existing stationary sources on a case-by-case basis. It provides an annotated bibliography of documents to aid in identifying the activities that cause PM-10 emissions as well as applicable air pollution control measures and their effectiveness in reducing emissions. The most stringent state total particulate matter (PM) emission limits are identified for several categories of PM-10 sources and compared to available emission test data. Finally, guidance is provided on procedures for estimating total capital investment and total annual cost of the control measures which are generally used to control PM-10 emissions