Planning and reporting of Russian transmutation research projects within ISTC. Phase 1

International Nuclear Information System (INIS)

Conde, H.

1997-02-01

The International Scientific and Technical Center (ISTC) in Moscow funds research of civil interest to counteract the risk of nuclear weapon proliferation. Recently, new technical concepts, Accelerator Transmutation of Nuclear Waste (ATW), have been proposed to incinerate and transmute long-lived radioactive nuclear waste to relax the time needed to store the waste in a geological repository. The Russian experts are knowledgeable and well equipped for doing research in the different technical fields of relevance for the transmutation concepts. Thus, a number of ISTC projects have been proposed to investigate different technical aspects of ATW with a result that a fair number of former weapon specialists have converted from military to peaceful civilian research. The present report describes the back ground, the status and near term activities of a few ISTC projects of relevance for the ATW concept, which are planned with the participation of a Swedish reference group. 4 refs

Semipalatinsk test site is the object of ISTC extra attention on the way of sustainable development

International Nuclear Information System (INIS)

Genisaretskaya, S.V.

2005-01-01

This paper is dedicated to analysis of international ecological projects carried out by ISTC. The project to a greater or lesser extent touch upon Semipalatinsk nuclear test site from the point of view of sustainable development. The report provides us with statistics on ISTC projects and projects managed by scientists of National Nuclear Center of Republic of Kazakhstan as well. There is also brief description of the given projects. (author)

Planning and reporting of Russian transmutation research projects within ISTC. Phase 2

Energy Technology Data Exchange (ETDEWEB)

Conde, H. [Uppsala Univ. (Sweden). Dept. of Neutron Research; Gudowski, W. [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Reactor and Neutron Physics; Liljenzin, J.O. [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Nuclear Chemistry; Mileikovsky, C. [Pully (Switzerland)

1998-11-01

The present report about phase 2 of the SKI project on Planning and Reporting of Russian Transmutation Research Projects within ISTC is an update of the information given in the SKI report no 97:15 (Feb 1997) about phase 1 of the same project. The background information is partly repeated in the present report to avoid that the reader has to go back to the report of Phase 1 for information about the basis for the project. USA, EU, Japan, Republic of Korea and Norway are at present supporting the International Scientific and Technical Center (ISTC) in Moscow. The Centre gives funds to research projects of civilian interest to former nuclear weapon laboratories to counteract the risk of nuclear weapon proliferation by the emigration of former USSR technical and scientific experts to `border countries` which are aiming towards the development of nuclear weapons. Before Sweden and Finland entered the EU, both countries gave national support to ISTC, in the case of Sweden 4 MUSD. Some of the projects which were funded by the Swedish national support to ISTC are still in progress. Nuclear technical concepts (i.e. Accelerator Transmutation of Nuclear Waste, ATW) have been proposed to incinerate and transmute long-lived radioactive nuclear waste to relax the time needed to store the waste in a geological repository. The named Russian experts are knowledgeable and well equipped of doing research in the different technical fields of relevance for the transmutation concepts. Thus, a number of ISTC projects have been initiated, and further ones have been proposed, to investigate different technical aspects of ATW with a result that a fair number of former weapon specialists have converted from military to peaceful civilian research. A similar centre STCU (The Scientific and Technical Centre of the Ukraine) has been set up in Kiev. Sweden has been active in promoting this Centre, which is supported by USA, Japan, Canada and recently also by EU. The present report describes the

Planning and reporting of Russian transmutation research projects within ISTC. Phase 2

International Nuclear Information System (INIS)

Conde, H.

1998-11-01

The present report about phase 2 of the SKI project on Planning and Reporting of Russian Transmutation Research Projects within ISTC is an update of the information given in the SKI report no 97:15 (Feb 1997) about phase 1 of the same project. The background information is partly repeated in the present report to avoid that the reader has to go back to the report of Phase 1 for information about the basis for the project. USA, EU, Japan, Republic of Korea and Norway are at present supporting the International Scientific and Technical Center (ISTC) in Moscow. The Centre gives funds to research projects of civilian interest to former nuclear weapon laboratories to counteract the risk of nuclear weapon proliferation by the emigration of former USSR technical and scientific experts to 'border countries' which are aiming towards the development of nuclear weapons. Before Sweden and Finland entered the EU, both countries gave national support to ISTC, in the case of Sweden 4 MUSD. Some of the projects which were funded by the Swedish national support to ISTC are still in progress. Nuclear technical concepts (i.e. Accelerator Transmutation of Nuclear Waste, ATW) have been proposed to incinerate and transmute long-lived radioactive nuclear waste to relax the time needed to store the waste in a geological repository. The named Russian experts are knowledgeable and well equipped of doing research in the different technical fields of relevance for the transmutation concepts. Thus, a number of ISTC projects have been initiated, and further ones have been proposed, to investigate different technical aspects of ATW with a result that a fair number of former weapon specialists have converted from military to peaceful civilian research. A similar centre STCU (The Scientific and Technical Centre of the Ukraine) has been set up in Kiev. Sweden has been active in promoting this Centre, which is supported by USA, Japan, Canada and recently also by EU. The present report describes the

Quality management system in ISTC 'Ukryttia'

International Nuclear Information System (INIS)

Ershova, N.N.; Klyuchnikov, A.A.; Lagutin, I.G.

2003-01-01

Some structural and certification aspects of ISTC 'Ukryttia' quality system are seen,and main principles of adaptation of existing quality system model to quality management system model in conformity with ISO 9001:2000 standard are shown

The review of ISTC/STCU 'On the environmental assessment for long term monitoring and remediation in and around Fukushima'

International Nuclear Information System (INIS)

Tsuruoka, S.

2017-01-01

An international project ISTC/STCU 'On the Environmental Assessment for Long Term Monitoring and Remediation in and Around Fukushima' was conducted for 4 years. The project was involved by ISTC/STCU, DOE in the United State, IAEA/JAEA, Ministry of Education, Culture, Sports, Science and technology Japan, and the other institutions. The objectives were to remedy for radioactive contamination in soil after the Fukushima One nuclear power plant accident in 2011, where the scientific experiences to recover farming and forest area in Chernobyl were applied. This review summarizes the exploration results. (author)

Nonproliferation and Threat Reduction Assistance: U.S. Programs in the Former Soviet Union

Science.gov (United States)

2012-03-06

funds the International Science and Technology Center ( ISTC ) in Moscow and its companion Science and Technology Center (STCU) in Kiev, Ukraine. In...European Union, and Russia established the International Science and Technology Center ( ISTC ) in Moscow. Several other former Soviet states joined the...provided $9.5 million to support 34 projects. Between 1994 and 2009, the ISTC in Moscow had received more than $803 million in funding from its

Do Independent Sector Treatment Centres (ISTC) impact on specialist registrar training in primary hip and knee arthroplasty?

Science.gov (United States)

Clamp, Jonathan A; Baiju, Dean; Copas, David P; Hutchinson, James W; Rowles, John M

2008-09-01

The introduction of Modernising Medical Careers (MMC) is likely to reduce specialist registrar (SpR) operative experience during higher surgical training (HST). A further negative impact on training by local Independent Sector Treatment Centres (ISTCs) could reduce experience, and thus competence, in primary joint arthroplasty at completion of higher surgical training. Retrospective case note and radiograph analysis of patients receiving primary hip and knee arthroplasty in a teaching hospital, before and after the establishment of a local ISTC. Patients and operative details were recorded from the selected case notes. Corresponding radiographs were assessed and the severity of the disease process assessed. Fewer primary hip and knee replacements were performed by SpRs in the time period after the establishment of an ISTC. ISTCs may adversely affect SpR training in primary joint arthroplasty.

Nuclear Waste Separation and Transmutation Research with Special Focus on Russian Transmutation Projects Sponsored by ISTC

International Nuclear Information System (INIS)

Conde, Henri; Blomgren, Jan; Olsson, Nils

2003-03-01

for transmutation of long lived nuclear waste should be carried through on about the same level as present (5 MSEK/year). Support is also given for participation in international projects, primarily EU projects. The aim of the research is to provide knowledgeable experts in the field to assess the international research and development on transmutation. Swedish transmutation research, in general fundamental research, are performed at three universities CTH, KTH and Uppsala University with the essential support from SKB, SKI and Swedish Nuclear Technology Centre. The same university groups are also participating in a number of international transmutation related research projects, in particular, the projects under the 5th Framework Programme of the European Commission. One of the main issues of the International Science and Technology Center (ISTC) in Moscow, which is financially supported by USA, EU, Russia, Japan, South Korea and Norway, is to reduce the proliferation risk by engaging experts at the former Soviet Union nuclear weapon laboratories in civilian research. This issue has been more pronounced since the terrorist attacks on September 11, 2001 and the following threats from the same group of terrorists. At a workshop in Saltsjoebaden in 1991 on Accelerator Based Radioactive Waste Transmutation it was concluded that research on incineration and transmutation of reactor- and weapons grade plutonium was a civilian research area well suited to occupy the former USSR weapon experts with support from ISTC. The Expert Group on Transmutation/SKI Reference Group has chosen to initiate ISTC projects, which are dealing with fundamental technical issues for the accelerator driven transmutation concepts. The possibility of finding a Swedish research group as a counterpart to the Russian group has also played a role in the reference group's selection of projects. The Swedish research groups from CTH, KTH and UU are at present collaborating in 9 transmutation projects

Arms Control and Nonproliferation: A Catalog of Treaties and Agreements

Science.gov (United States)

2014-07-21

United States, Japan, the European Union, and Russia established the International Science and Technology Center ( ISTC ) in Moscow. A similar center...at their primary jobs. The Russian government announced in August 2010 that it would withdraw from the agreement on the establishing of the ISTC ...and from the protocol on temporary application of the ISTC foundation agreement. The ISTC Board decided in December 2010 that all current projects

Main Experimental Results of ISTC-1606 for Recycling and Transmutation in Molten Salt Systems

Energy Technology Data Exchange (ETDEWEB)

Ignatiev, Victor; Feynberg, Olga; Merzlyakov, Aleksandr; Surenkov, Aleksandr [Russian Research Center - Kurchatov Institute, Kurchatov sq. 1, Moscow, RF, 123182 (Russian Federation); Subbotin, Vladimir; Zakirov, Raul; Toropov, Andrey; Panov, Aleksandr [Russian Federal Nuclear Center - Institute of Technical Physics, Snezhinsk (Russian Federation); Afonichkin, Valery [Institute of High-Temperature Electrochemistry, Ekaterinburg (Russian Federation)

2008-07-01

To examine and demonstrate the feasibility of molten salt reactors (MSR) to reduce long lived waste toxicity and to produce efficiently electricity in closed fuel cycle, some national and international studies were initiated last years. In this paper main focus is placed on experimental evaluation of single stream Molten Salt Actinide Recycler and Transmuter (MOSART) system fuelled with different compositions of plutonium plus minor actinide trifluoride (AnF{sub 3}) from LWR spent nuclear fuel without U-Th support. This paper summarizes main experimental results of ISTC-1606 related to physical and chemical properties of fuel salt, container materials for fuel circuit, and fuel salt clean up of MOSART system. As result of ISTC-1606 studies claim is made, that the {sup 7}Li,Na,Be/F and {sup 7}Li,Be/F solvents selected for primary system appear to resolve main reactor physics, thermal hydraulics, materials compatibility, fuel salt clean up and safety problems as applied to the MOSART concept development. The created experimental facilities and the database on properties of fuel salt mixtures and container materials are used for a choice and improvement fuel salts and coolants for new applications of this high temperature technology for sustainable nuclear power development. (authors)

Main Experimental Results of ISTC-1606 for Recycling and Transmutation in Molten Salt Systems

International Nuclear Information System (INIS)

Ignatiev, Victor; Feynberg, Olga; Merzlyakov, Aleksandr; Surenkov, Aleksandr; Subbotin, Vladimir; Zakirov, Raul; Toropov, Andrey; Panov, Aleksandr; Afonichkin, Valery

2008-01-01

To examine and demonstrate the feasibility of molten salt reactors (MSR) to reduce long lived waste toxicity and to produce efficiently electricity in closed fuel cycle, some national and international studies were initiated last years. In this paper main focus is placed on experimental evaluation of single stream Molten Salt Actinide Recycler and Transmuter (MOSART) system fuelled with different compositions of plutonium plus minor actinide trifluoride (AnF 3 ) from LWR spent nuclear fuel without U-Th support. This paper summarizes main experimental results of ISTC-1606 related to physical and chemical properties of fuel salt, container materials for fuel circuit, and fuel salt clean up of MOSART system. As result of ISTC-1606 studies claim is made, that the 7 Li,Na,Be/F and 7 Li,Be/F solvents selected for primary system appear to resolve main reactor physics, thermal hydraulics, materials compatibility, fuel salt clean up and safety problems as applied to the MOSART concept development. The created experimental facilities and the database on properties of fuel salt mixtures and container materials are used for a choice and improvement fuel salts and coolants for new applications of this high temperature technology for sustainable nuclear power development. (authors)

The analyses of measured nuclide concentration in project ISTC 2670

International Nuclear Information System (INIS)

Chrapciak, V.

2006-01-01

In this article are analyzed experiments for WWER-440 fuel and compared with theoretical results by new version of the SCALE 5 code: nuclide compositions - measurement in Kurchatov institute for 3.6% - measurement in Dimitrovgrad for 3.6% (project ISTC 2670) The focus is on modules TRITON and ORIGEN-S (Authors)

Proposal to amend a partner project agreement with ISTC for the CMS collaboration

CERN Document Server

2000-01-01

This document concerns an amendment to a partner project agreement with the ISTC, namely the Partner Project Agreement 1718p for "Technology Reliability Demonstration and Precise CMS Electromagnetic Calorimetry Performance at LHC on a Base of Specified Tungstate (PbWO4) Scintillation Crystals". This Partner Project was approved by Council on 17 December 1999 (cf. CERN/2312). For reasons set out in this document the Finance Committee is invited to authorise CERN to negotiate an amendment to the Partner Project Agreement 1718p. The purpose of the amendment is to increase the production rate of crystals through the acquisition, installation and commissioning of 33 additional crystal growth ovens for a total amount of 1 500 000 US dollars.

[International Standards of Tuberculosis Care (ISTC)--comments from the German point of view].

Science.gov (United States)

Castell, S; Bauer, T; Diel, R; Hedrich, A; Magdorf, K; Rüsch-Gerdes, S; Schaberg, T; Loddenkemper, R

2012-04-01

The "International Standards for Tuberculosis Care" (ISTC) were developed by the World Health Organisation (WHO) and others to provide internationally agreed and, if possible, evidence-based standards for tuberculosis care including the care by private providers who are not part of national tuberculosis programmes or health-care systems. Hence, the ISTC primarily address resource-restrained countries with high tuberculosis prevalence. In this article, the German translation of the 21 standards from 2009 is presented - addressing diagnostic and therapeutic standards, co-infection (especially with HIV) and public-health issues. The accompanying comments show how these standards have to be modified for Germany due to the medical resources available here and country-specific characteristics respectively. © Georg Thieme Verlag KG Stuttgart · New York.

Investigation of the Surface Filamentary Discharge in Focus of Microwave Radiation

Science.gov (United States)

2010-08-01

microwave radiation 5a. CONTRACT NUMBER ISTC Registration No: 3784 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Dr. Kirill...NUMBER(S) ISTC 07-7011 12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution is unlimited. (approval given by local...contract to the International Science and Technology Center ( ISTC ), Moscow Project ISTC # 3784p (077011) Investigation of the surface filamentary

Proposal for the Extension of a Project Agreement with ISTC - Crystal Clear Collaboration

CERN Document Server

2002-01-01

This document concerns the extension of the scope of work covered by a project agreement with the ISTC, entitled "Development of the Detector Production Technology for a New Generation of Positron Emission Tomographs to be used in Medicine and Pharmacology" which was approved by Finance Committee on 19 September 2001 (CERN/FC/4478). For the reasons set out in this document, the Finance Committee is invited to approve the extension of the scope of work covered by the above project agreement for the optimisation of the technology for a total amount of 160 000 US dollars. This extension will be partially funded by two external sponsors (RAYTEST - DE and the UNIVERSITY OF LAUSANNE - CH) at the level of 90 000 US dollars. CERN's contribution, which will be funded by revenue generated by its technology transfer activities, will not exceed 70 000 US dollars. This extension will bring the total amount of the Project Agreement to 935 000 US dollars, of which CERN's total contribution will not exceed 320 000 US dollars...

Status and prospect of non-proliferation activities of ISTC and STCU

International Nuclear Information System (INIS)

Richard, M.; Daoust Maleval, D.; Louvet, P.

2009-01-01

This article examines the role of the International Science and Technology Centre of Moscow (ISTC) and the Science and Technology Centre of Ukraine in Kiev (STCU) in preventing proliferation of the weapons of mass destruction (WMD) expertise and know-how of scientists and engineers from the Former Soviet Union countries. The Centres were created in the first half of the nineties, in the context of the collapse of the Soviet Union. This collapse raised very serious concerns: over the risk of former WMD scientists and engineers being recruited by States of concern or terrorist groups that wished to develop their own WMD capabilities and means of delivery; and the possibility that scientists and engineers would be driven to sell their knowledge, know-how or equipment in order to survive. Since the Centres' inception, the regional and international context has changed dramatically at both economic and strategic levels, in particular regarding non-proliferation and global security. Changes of a political and strategic nature in the former Soviet Union required the European Union to review its relationship with Russia, to reassess the importance of Central Asian Countries and the future of Ukraine as it is pulled between Russia and Europe. The Centres have had to adapt to these changes. The article draws from an evaluation of the Centres' non-proliferation activities, carried out by the authors between November 2006 and September 2007 at the request of the European Commission. Moreover, since completion of the mission, many events, important for the strategic relationships between E U, Russia and other Commonwealth of Independent States (CIS) countries occurred as the affirmation of Russia's regional leadership: its rearmament along with the stiffening of its relationships with western countries and some neighbours and closure to visitors; the Georgia-Russia conflict; and the Russia-Ukraine gas crisis. As CIS countries are more affected by the current economical crisis

Plasma Control of Separated Flows on Delta Wings at High Angles of Attack

Science.gov (United States)

2009-03-18

of Attack 5a. CONTRACT NUMBER ISTC Registration No: 3646 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Dr. Anatoly Alexandrovich...NUMBER(S) ISTC 06-7002 12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution is unlimited. 13. SUPPLEMENTARY...This work is supported financially by EOARD and performed under the agreement with the International Science and Technology Center ( ISTC ), Moscow

Molten salts as possible fuel fluids for TRU fuelled systems: ISTC no. 1606 approach

International Nuclear Information System (INIS)

Ignatiev, V.; Zakirov, R.; Grebenkine, K.

2001-01-01

The principle attraction of the molten salt reactor (MSR) technology is the use of fuel/fertile material flexibility (easy of fuel preparation and processing) for gaining additional profits as compared with solid materials. This approach presents important departures from traditional philosophy, applied in current nuclear power plants, and to some extent contradicts the straightforward interpretation of the defence-in-depth principal. Nevertheless we understand there may be potential to use MSR technology to support back end fuel cycle technologies in future commercial environment. The paper aims at reviewing results of the work performed in Russia, relevant to the problems of MSR technology development. Also this contribution aims at evaluation of remaining uncertainties for molten salt burner concept implementation. Fuel properties and behaviour, container materials, and clean-up of fuels with emphasis on experiments will be of priority. Recommendations are made regarding the types of experimental studies needed on a way to implement molten salt technology to the back-end of the fuel cycle. To better understand the potential and limitations of the molten salts as a fuel for reactor of incinerator type, Russian Institutes have submitted to the ISTC the Task no. 1606 Experimental Study of Molten Salt Technology for Safe and Low Waste Treatment of Plutonium and Minor Actinides in Accelerator Driven and Critical Systems. The project goals, technical approach and expected specific results are discussed. (author)

The Comparative Study of the Effects of Extremely Low Frequency Electromagnetic Fields and Infrasound on Water Molecule Dissociation and Generation of Reactive Oxygen Species

Science.gov (United States)

2008-11-01

ISTC Project No. #1592P The Comparative Study of The Effects of Extremely Low Frequency Electromagnetic Fields and Infrasound on Water Molecule...performed under the agreement with the International Science and Technology Center ( ISTC ), Moscow. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704...dissociation and generation of reactive oxygen spaces. 5a. CONTRACT NUMBER ISTC Registration No: A-1592p 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

[The International Standards for Tuberculosis Care (ISTC): what is the importance for Japan?].

Science.gov (United States)

Fujiwara, Paula I

2008-07-01

In 2005, the World Health Assembly resolved that all Member States should ensure that all persons with tuberculosis (TB) "have access to the universal standard of care based on proper diagnosis, treatment and reporting consistent with the DOTS strategy..." The purpose of the International Standards for Tuberculosis Care (ISTC) is to define the widely accepted level of care of persons either suspected of, or diagnosed with, TB by all health practitioners, especially those in the private sector, who often lack guidance and systematic evaluation of outcomes provided by government programs. Since their publication in 2006 on World TB Day, the standards have been endorsed by the major international health organizations as well as many country-level professional societies. The intention is to complement local and national control polices consistent with those of the World Health Organization: they are not intended to replace local guidelines, but are written to accommodate local differences in practice. The ISTC comprise seventeen evidence-based standards on tuberculosis diagnosis and treatment, as well as the responsibility of the public health sector. These are based on the basic principles of TB care: prompt and accurate diagnosis, standardized treatment regimens of proven efficacy, appropriate treatment support and supervision, monitoring of response to treatment and the carrying out of essential public health responsibilities. The relevance of the ISTC to the Japanese context is highlighted, in terms of when persons should be suspected of TB; the appropriate diagnostic modalities, including the use of chest radiographs; the advantages of fixed dose combinations; the importance of follow-up laboratory tests to document response to treatment, the importance of recordkeeping and reporting to public health authorities, the value of HIV testing of TB patients and the use of anti-retrovirals for those dually infected; and the assessment of drug resistance and the

ISTC projects devoted to improving laser beam quality

Science.gov (United States)

Malakhov, Yu. I.

2007-05-01

Short overview is done about the activity of ISTC in a direction concerned with improving powerful laser beam quality by means of nonlinear and linear adaptive optics methods. Completed projects #0591 and #1929 resulted in the development of a stimulated Brillouin scattering (SBS) phase conjugation mirror of superhigh fidelity employing the kinoform optical elements (rasters of small lenses) of new generation designed for pulsed or pulse-periodic lasers with nanosecond scale pulse duration. Project #2631 is devoted to development of an adaptive optical system for phase registration and correction of laser beams with wave front vortices. The principles of operation of conventional adaptive systems are based on the assumption that the phase is a smooth continuous function in space. Therefore the solution of the Project tasks will assume a new step in adaptive optics.

Severe accident research in the core degradation area: An example of effective international cooperation between the European Union (EU) and the Commonwealth of Independent States (CIS) by the International Science and Technology Center

Energy Technology Data Exchange (ETDEWEB)

Bottomley, D., E-mail: paul.bottomley@ec.europa.eu [ITU Institut fuer Transurane, PO box 2340, 76125 Karlsruhe (Germany); Stuckert, J.; Hofmann, P. [KIT Campus Nord, Hermann-von-Helmholtz Pl. 1, 76344 Eggenstein-Leopoldshafen (Germany); Tocheny, L. [ISTC Krasnoproletarskaya 32-34, PO Box 20, 127473 Moscow (Russian Federation); Hugon, M. [European Commission DG - Research and Tech. Development, Sq. de Meeus, B-1049 Brussels (Belgium); Journeau, C. [CEA, DEN, Cadarache, F13108 St Paul lez Durance (France); Clement, B. [IRSN PSN-RES/SAG Cadarache, BP3 F13115, St Paul lez Durance (France); Weber, S. [GRS Muenchen, Thermal Hydraulics Div., Garching 85748,Germany (Germany); Guentay, S. [PSI NES/LTH OHSA C11, 5232 Villigen (Switzerland); Hozer, Z. [AEKI Fuel Department, P.O. Box 49, Budapest H-1525 (Hungary); Herranz, L. [CIEMAT, Energy -Nuclear Fission Division, Complutense 40, 28040 Madrid (Spain); Schumm, A. [EDF - R and D, SINETICS, Avenue du General de Gaulle 1, Clamart 92140 (France); Oriolo, F. [Pisa University, Ing. Mecc. Nucl. Prod., Largo Lazarino 2, Pisa 56126 (Italy); Altstadt, E. [HZDR Structural Matls, Rossendorf, Postfach 51 01 19, 01314 Dresden (Germany); Krause, M. [AECL - Reactor Safety, Chalk River, Ontario, Canada K0J 1J0 (Canada); Fischer, M. [AREVA NP GMBH, Dept. PEPA-G, 91058 Erlangen (Germany); Khabensky, V.B. [Alexandrov Institute of Technologies (NITI), Sosnovy Bor (Russian Federation); Bechta, S.V. [Kungliga Tekniska Hoegskolan (KTH), AlbaNova University Centre, Roslagstullsbacken 21, SE-106 91 Stockholm (Sweden); Veshchunov, M.S. [Nuclear Safety Institute (IBRAE), Russian Academy of Sciences, 52 B. Tulskaya, Moscow 115191 (Russian Federation); Palagin, A.V. [KIT Campus Nord, Hermann-von-Helmholtz Pl. 1, 76344 Eggenstein-Leopoldshafen (Germany); and others

2012-11-15

Highlights: Black-Right-Pointing-Pointer ISTC supported successful nuclear safety projects between EU and Russian institutes. Black-Right-Pointing-Pointer Two-tier project monitoring has proved to be very successful and flexible. Black-Right-Pointing-Pointer Examples are reactor degradation, corium steel corrosion, and corium thermodynamics. - Abstract: The International Science and Technology Center (ISTC) was set up in Moscow to support non-proliferation of sensitive knowledge and technologies in biological, chemical and nuclear domains by engaging scientists in peaceful research programmes with a broad international cooperation. The paper has two following objectives: Bullet to describe the organization of complex, international, experimental and analytical research of material processes under extreme conditions similar to those of severe accidents in nuclear reactors and, Bullet to inform briefly about some results of these studies. The main forms of ISTC activity are Research Projects and Supporting Programs. In the Research Projects informal contact expert groups (CEGs) were set up by ISTC to improve coordination between adjacent projects and to encourage international collaboration. The European Commission was the first to use this. The CEG members - experts from the national institutes and industry - evaluated and managed the projects' scientific results from initial stage of proposal formulation until the final reporting. They were often involved directly in the project's details by joining the Steering Committees of the project. The Contact Expert Group for Severe Accidents and Management (CEG-SAM) is one of these groups, five project groups from this area from the total of 30 funded projects during 10 years of activity are detailed to demonstrate this: (1) QUENCH-VVER from RIAR, Dimitrovgrad and IBRAE, Moscow, and PARAMETER projects (SF1-SF4) from LUCH, Podolsk and IBRAE, Moscow; these concerned a detailed study of bundle quenching from high

Technology Information Center

International Nuclear Information System (INIS)

Emerson, E.L.; Shepherd, E.W.; Minor, E.E.

1980-01-01

A Transportation Technology Center (TTC) has been established at Sandia to address the transportation of nuclear waste and spent fuel. The Technology Information Center (TIC) acts as TTC's clearing house for nuclear material transportation information. TIC's activities are divided into three activities: public information, policy information, and technical information. Some of the uses of TIC's activities are briefly outlined

Scientific and technological assistance and the challenge of the 80's

Energy Technology Data Exchange (ETDEWEB)

Moravcsik, M J

1981-02-01

The US proposal for an Institute for Scientific and Technological Cooperation (ISTC) to aid developing countries could coordinate with new Third World development trends, which reflect attitudinal changes. This reassessment on the part of developing countries recognizes the relationship of appropriate scientific and technological infrastructures to long-term benefits and the need to promote indigenous leadership and personal development in order to rise above the status of welfare. This new approach will reduce political controversy, be less expensive, rely more on human than material resources, and emphasize the small scale. ISTC can integrate its actions with these trends by thinking in terms of building a broad infrastructure, avoiding country-specific projects, and operating directly through the scientific community. (DCK)

"Infotonics Technology Center"

Energy Technology Data Exchange (ETDEWEB)

Fritzemeier, L. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Boysel, M. B. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Smith, D. R. [Infotonics Technology Center Inc., Canandaigua, NY (United States)

2004-09-30

During this grant period July 15, 2002 thru September 30, 2004, the Infotonics Technology Center developed the critical infrastructure and technical expertise necessary to accelerate the development of sensors, alternative lighting and power sources, and other specific subtopics of interest to Department of Energy. Infotonics fosters collaboration among industry, universities and government and operates as a national center of excellence to drive photonics and microsystems development and commercialization. A main goal of the Center is to establish a unique, world-class research and development facility. A state-of-the-art microsystems prototype and pilot fabrication facility was established to enable rapid commercialization of new products of particular interest to DOE. The Center has three primary areas of photonics and microsystems competency: device research and engineering, packaging and assembly, and prototype and pilot-scale fabrication. Center activities focused on next generation optical communication networks, advanced imaging and information sensors and systems, micro-fluidic systems, assembly and packaging technologies, and biochemical sensors. With targeted research programs guided by the wealth of expertise of Infotonics business and scientific staff, the fabrication and packaging facility supports and accelerates innovative technology development of special interest to DOE in support of its mission and strategic defense, energy, and science goals.

Theory-Informed Interventions to Improve the Quality of Tuberculosis Evaluation at Ugandan Health Centers: A Quasi-Experimental Study.

Science.gov (United States)

Chaisson, Lelia H; Katamba, Achilles; Haguma, Priscilla; Ochom, Emmanuel; Ayakaka, Irene; Mugabe, Frank; Miller, Cecily; Vittinghoff, Eric; Davis, J Lucian; Handley, Margaret A; Cattamanchi, Adithya

2015-01-01

Tuberculosis (TB) remains under-diagnosed in many countries, in part due to poor evaluation practices at health facilities. Theory-informed strategies are needed to improve implementation of TB evaluation guidelines. We aimed to evaluate the impact of performance feedback and same-day smear microscopy on the quality of TB evaluation at 6 health centers in rural Uganda. We tested components of a multi-faceted intervention to improve adherence to the International Standards for Tuberculosis Care (ISTC): performance feedback and same-day smear microscopy. The strategies were selected based on a qualitative assessment guided by the Theory of Planned Behavior and the PRECEDE model. We collected patient data 6 months before and after the introduction of each intervention component, and compared ISTC adherence in the pre- and post-intervention periods for adults with cough ≥ 2 weeks' duration. The performance feedback evaluation included 1,446 adults; 838 (58%) were evaluated during the pre-intervention period and 608 (42%) during the post-intervention period. Performance feedback resulted in a 15% (95%CI +10% to +20%, pISTC-adherent care. The same-day microscopy evaluation included 1,950 adults; 907 (47%) were evaluated during the pre-intervention period and 1,043 (53%) during the post-intervention period. Same-day microscopy was associated with a 14% (95%CI +10% to +18%, pISTC-adherent care. Performance feedback and same-day microscopy should be considered along with ISTC training as part of a multi-faceted intervention to improve the quality of TB evaluation in other high TB burden countries.

Proposal for the extension of a partner project agreement with ISTC ? ATLAS collaboration

CERN Document Server

2000-01-01

This document concerns the extension of the scope of work covered by a partner project agreement with the ISTC, namely Partner Project Agreement 1800p for Manufacturing, Assembly and Testing of the End-cap Transition Radiation Tracker (TRT) for the ATLAS Experiment at the CERN LHC. This Partner Project Agreement was approved by Council on 23 June 2000 (c.f. draft minutes of the meeting CERN/2340/Draft). For reasons set out in this document the Finance Committee is invited to approve the extension of the scope of work covered by Partner Project Agreement 1800p to include the Manufacturing, Assembly and Testing of type C End-cap support rings for a total amount of 503 720 Swiss francs.

Theory-Informed Interventions to Improve the Quality of Tuberculosis Evaluation at Ugandan Health Centers: A Quasi-Experimental Study.

Directory of Open Access Journals (Sweden)

Lelia H Chaisson

Full Text Available Tuberculosis (TB remains under-diagnosed in many countries, in part due to poor evaluation practices at health facilities. Theory-informed strategies are needed to improve implementation of TB evaluation guidelines. We aimed to evaluate the impact of performance feedback and same-day smear microscopy on the quality of TB evaluation at 6 health centers in rural Uganda.We tested components of a multi-faceted intervention to improve adherence to the International Standards for Tuberculosis Care (ISTC: performance feedback and same-day smear microscopy. The strategies were selected based on a qualitative assessment guided by the Theory of Planned Behavior and the PRECEDE model. We collected patient data 6 months before and after the introduction of each intervention component, and compared ISTC adherence in the pre- and post-intervention periods for adults with cough ≥ 2 weeks' duration.The performance feedback evaluation included 1,446 adults; 838 (58% were evaluated during the pre-intervention period and 608 (42% during the post-intervention period. Performance feedback resulted in a 15% (95%CI +10% to +20%, p<0.001 increase in the proportion of patients receiving ISTC-adherent care. The same-day microscopy evaluation included 1,950 adults; 907 (47% were evaluated during the pre-intervention period and 1,043 (53% during the post-intervention period. Same-day microscopy was associated with a 14% (95%CI +10% to +18%, p<0.001 increase in the proportion of patients receiving ISTC-adherent care.Performance feedback and same-day microscopy should be considered along with ISTC training as part of a multi-faceted intervention to improve the quality of TB evaluation in other high TB burden countries.

ISTC Projects from RFNC-VNIIEF Devoted to Improving Laser Beam Quality

Science.gov (United States)

Starikov, F.; Kochemasov, G.

Information is given about the Projects # 1929 and # 2631 supported by ISTC and concerned with improving laser beam quality and interesting for adaptive optics community. One of them, Project # 1929 has been recently finished. It has been devoted to development of an SBS phase conjugation mirror of superhigh conjugation quality employing the kinoform optics for high-power lasers with nanosecond scale pulse duration. With the purpose of reaching ideal PC fidelity, the SBS mirror includes the raster of small lenses that has been traditionally used as the lenslet in Shack-Hartmann wavefront sensor in adaptive optics. The second of them, Project # 2631, is concerned with the development of an adaptive optical system for phase correction of laser beams with wavefront vortex. The principles of operation of modern adaptive systems are based on the assumption that the phase is a smooth continuous function in space. Therefore the solution of the Project tasks will assume a new step in adaptive optics.

International Center for Gas Technology Information

International Nuclear Information System (INIS)

Gad, L.H.

1993-01-01

Based on an acknowledgement of the growing importance of natural gas, a number of European countries, USA, Japan and the Russian Federation have worked together in order to establish a common center of information on natural gas technology under the auspices of the International Energy Agency. Centers were to be established in Washington and in Denmark. The centers will concern themselves with establishing an international information center for gas technology, effecting natural gas technology transfer between global regions, carrying out analytical studies on the energy market and the development of technology within the field of natural gas. The structure of the decision-making processes that will be employed is explained in addition to the organization and economy. The centers should build up a global information network between the relevant countries, their gas companies, institutions etc. (AB)

Technologies for learner-centered feedback

Directory of Open Access Journals (Sweden)

Jane Costello

2013-09-01

Full Text Available As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes. Feedback, types of feedback, guidelines for effective learner-centered feedback, and feedback’s relationship to assessment are presented. Methods of providing feedback, for example, automated, audio scribe pens, digital audio, etc., and the related technologies are described. Technologies that allow instructors to make informed decisions about the use of various methods for feedback are discussed.

2017 Technology Showcase | NCI Technology Transfer Center | TTC

Science.gov (United States)

The 2017 Technology Showcase is an inaugural, half-day event showcased technologies developed by the National Cancer Institute's Center for Cancer Research (CCR) and the Frederick National Laboratory for Cancer Research (FNLCR).

Energetics Manufacturing Technology Center (EMTC)

Data.gov (United States)

Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

Center for Advanced Computational Technology

Science.gov (United States)

Noor, Ahmed K.

2000-01-01

The Center for Advanced Computational Technology (ACT) was established to serve as a focal point for diverse research activities pertaining to application of advanced computational technology to future aerospace systems. These activities include the use of numerical simulations, artificial intelligence methods, multimedia and synthetic environments, and computational intelligence, in the modeling, analysis, sensitivity studies, optimization, design and operation of future aerospace systems. The Center is located at NASA Langley and is an integral part of the School of Engineering and Applied Science of the University of Virginia. The Center has four specific objectives: 1) conduct innovative research on applications of advanced computational technology to aerospace systems; 2) act as pathfinder by demonstrating to the research community what can be done (high-potential, high-risk research); 3) help in identifying future directions of research in support of the aeronautical and space missions of the twenty-first century; and 4) help in the rapid transfer of research results to industry and in broadening awareness among researchers and engineers of the state-of-the-art in applications of advanced computational technology to the analysis, design prototyping and operations of aerospace and other high-performance engineering systems. In addition to research, Center activities include helping in the planning and coordination of the activities of a multi-center team of NASA and JPL researchers who are developing an intelligent synthesis environment for future aerospace systems; organizing workshops and national symposia; as well as writing state-of-the-art monographs and NASA special publications on timely topics.

Morgantown Energy Technology Center, technology summary

International Nuclear Information System (INIS)

1994-06-01

This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. METC's R ampersand D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities

National Rehabilitation Hospital Assistive Technology Research Center

Science.gov (United States)

1995-10-01

Shoulder-Arm Orthoses Several years ago, the Rehabilitation Engineering Research Center (RERC) on Rehabilitation Robotics in Delaware1 identified a... exoskeletal applications for persons with disabilities. 2. Create a center of expertise in rehabilitation technology transfer that benefits persons with...AD COOPERATIVE AGREEMENT NUMBER: DAMD17-94-V-4036 TITLE: National Rehabilitation Hospital Assistive Technology- Research Center PRINCIPAL

Supporting learner-centered technology integration through situated mentoring

Science.gov (United States)

Rosenberg, Marian Goode

Situated mentoring was used as a professional development method to help 11 high school science teachers integrate learner-centered technology. The teachers' learner-centered technology beliefs and practices as well as their perception of barriers to learner-centered technology integration were explored before and after participating in the mentoring program. In addition, the participants' thoughts about the effectiveness of various components of the mentoring program were analyzed along with the mentor's observations of their practices. Situated mentoring can be effective for supporting learner-centered technology integration, in particular decreasing the barriers teachers experience. Goal setting, collaborative planning, reflection, and onsite just-in-time support were thought to be the most valuable components of the mentoring program.

The Stanford University US-Japan Technology Management Center

National Research Council Canada - National Science Library

Dasher, Richard

2002-01-01

This grant established the U.S.-Japan Technology Management Center, Stanford University School of Engineering, as an ongoing center of excellence for the study of emerging trends and interrelationships between technology...

Technologies for Learner-Centered Feedback

Science.gov (United States)

Costello, Jane; Crane, Daph

2013-01-01

As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes.…

76 FR 39811 - International Center for Technology Assessment and the Center for Food Safety; Noxious Weed...

Science.gov (United States)

2011-07-07

... dated July 18, 2002, the International Center for Technology Assessment and the Center for Food Safety... Inspection Service [Docket No. APHIS-2011-0081] International Center for Technology Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered for Herbicide...

A feasibility study for a manufacturing technology deployment center

Energy Technology Data Exchange (ETDEWEB)

1994-10-31

The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

Process Engineering Technology Center Initiative

Science.gov (United States)

Centeno, Martha A.

2002-01-01

NASA's Kennedy Space Center (KSC) is developing as a world-class Spaceport Technology Center (STC). From a process engineering (PE) perspective, the facilities used for flight hardware processing at KSC are NASA's premier factories. The products of these factories are safe, successful shuttle and expendable vehicle launches carrying state-of-the-art payloads. PE is devoted to process design, process management, and process improvement, rather than product design. PE also emphasizes the relationships of workers with systems and processes. Thus, it is difficult to speak of having a laboratory for PE at K.S.C. because the entire facility is practically a laboratory when observed from a macro level perspective. However, it becomes necessary, at times, to show and display how K.S.C. has benefited from PE and how K.S.C. has contributed to the development of PE; hence, it has been proposed that a Process Engineering Technology Center (PETC) be developed to offer a place with a centralized focus on PE projects, and a place where K.S.C.'s PE capabilities can be showcased, and a venue where new Process Engineering technologies can be investigated and tested. Graphics for showcasing PE capabilities have been designed, and two initial test beds for PE technology research have been identified. Specifically, one test bed will look into the use of wearable computers with head mounted displays to deliver work instructions; the other test bed will look into developing simulation models that can be assembled into one to create a hierarchical model.

Validating a Technology Enhanced Student-Centered Learning Model

Science.gov (United States)

Kang, Myunghee; Hahn, Jungsun; Chung, Warren

2015-01-01

The Technology Enhanced Student Centered Learning (TESCL) Model in this study presents the core factors that ensure the quality of learning in a technology-supported environment. Although the model was conceptually constructed using a student-centered learning framework and drawing upon previous studies, it should be validated through real-world…

License Agreements | NCI Technology Transfer Center | TTC

Science.gov (United States)

NCI Technology Transfer Center (TTC) licenses the discoveries of NCI and nine other NIH Institutes so new technologies can be developed and commercialized, to convert them into public health benefits.

KBTAC [Knowledge-Based Technology Application Center] - The EPRI [Electric Power Research Institute]-sponsored knowledge-based technology application center

International Nuclear Information System (INIS)

Meyer, W.; Wood, R.M.; Scherer, J.

1990-01-01

The Electric Power Research Institute (EPRI) has announced the establishment of the Knowledge-Based Technology Application Center (KBTAC), whose goal is to assist member utilities with expert system technology and applications. The center, established November 7, 1989, is located on the campus of Syracuse University, Syracuse, New York, and will be operated jointly by Kaman Sciences Corporation and the university. The mission of the KBTAC is to assist EPRI member utilities to develop, test, and transfer expert systems into nuclear power plant operations, maintenance, and administration

The 10th Anniversary Of Daejeon Environmental Technology Development Center

International Nuclear Information System (INIS)

2010-12-01

This book describes the Daejeon Environment Technology Development Center with pictures for ten years. It also introduces the purpose of the foundation and background of center, structure of the center, main project and role of the center, center logo, current situation of cost of project, research business for 10 years, business supporting the environmental corporate, environment education, public relations activity and vision and prospect of the Daejeon Environmental Technology Development Center.

Solar Technology Center

Energy Technology Data Exchange (ETDEWEB)

Boehm, Bob

2011-04-27

The Department of Energy, Golden Field Office, awarded a grant to the UNLV Research Foundation (UNLVRF) on August 1, 2005 to develop a solar and renewable energy information center. The Solar Technology Center (STC) is to be developed in two phases, with Phase I consisting of all activities necessary to determine feasibility of the project, including design and engineering, identification of land access issues and permitting necessary to determine project viability without permanently disturbing the project site, and completion of a National Environmental Policy Act (NEPA) Environmental Assessment. Phase II is the installation of infrastructure and related structures, which leads to commencement of operations of the STC. The STC is located in the Boulder City designated 3,000-acre Eldorado Valley Energy Zone, approximately 15 miles southwest of downtown Boulder City and fronting on Eldorado Valley Drive. The 33-acre vacant parcel has been leased to the Nevada Test Site Development Corporation (NTSDC) by Boulder City to accommodate a planned facility that will be synergistic with present and planned energy projects in the Zone. The parcel will be developed by the UNLVRF. The NTSDC is the economic development arm of the UNLVRF. UNLVRF will be the entity responsible for overseeing the lease and the development project to assure compliance with the lease stipulations established by Boulder City. The STC will be operated and maintained by University of Nevada, Las Vegas (UNLV) and its Center for Energy Research (UNLV-CER). Land parcels in the Eldorado Valley Energy Zone near the 33-acre lease are committed to the construction and operation of an electrical grid connected solar energy production facility. Other projects supporting renewable and solar technologies have been developed within the energy zone, with several more developments in the horizon.

Sandia National Laboratories: Microsystems Science & Technology Center

Science.gov (United States)

Environmental Management System Pollution Prevention History 60 impacts Diversity Locations Facts & Figures Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers

Mid-Atlantic Technology Applications Center. Quarters 1-4

Science.gov (United States)

1997-01-01

Mid-atlantic Technology Application Center (MTAC) pursued a number of initiatives designed to enhance the strategic position of the Langley Research Center (LaRC) and NASA in industry. Among these was a closer association with the ISA, International Society for Measurement and Control. During 1997, MTAC placed articles regarding NASA-developed technologies in each In Tech magazine. The monthly magazine is sent to 46,000 sensors and instrumentation professionals. In addition, MTAC coordinated NASXs participation in the ISA Tech 97 Conference, securing $112,000 of free exhibit space, 1500 NASA sensors posters at no cost to NASA, and thousands of dollars of free publicity. MTAC was awarded a contract by ISA to operate its Technical Resource Center (TRC). The goal of this project is to determine what user needs are in order to identify opportunities for collaboration between NASA centers and companies. In addition, the TRC work will lay the groundwork for the Technology Development Consortium (TDC) proposed by MTAC. The purpose of the TDC is to: match current industry needs with NASA technologies available now, and to identify future needs of NASA and industry which may lead to dual use projects. The goal of these activities is twofold: to infuse NASA technologies into the sensors and instrumentation industry and to secure industry funds to support NASA technology development projects. The instrumentation and sensors industry is valued at $30 billion worldwide, with $12 billion in sales in the United States. The growth rate averages 13.5%, so that by the year 2000, the industry will produce products worth $49 billion. More than 80% of instruments, sensors and control systems are currently manufactured in the United States. NASA and the industry do not have a history of collaborative projects; MTAC's initiatives in this area are designed to foster working relationships between the two parties that will help maintain U.S. leadership in this field. Mid-atlantic Technology

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-10-31

The Deactivation and Decommissioning (D&D) Technology Assessment Program (TAP) was developed to provide detailed, comparable data for environmental technologies and to disseminate this data to D&D professionals in a manner that will facilitate the review and selection of technologies to perform decontamination and decommissioning. The objectives for this project include the following: Determine technology needs through review of the Site Technology Coordination Group (STCG) information and other applicable websites and needs databases; Perform a detailed review of industries that perform similar activities as those required in D&D operations to identify additional technologies; Define the technology assessment program for characterization and waste management problem sets; Define the data management program for characterization, dismantlement, and waste management problem sets; Evaluate baseline and innovative technologies under standard test conditions at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and other locations and collect data in the areas of performance, cost, health and safety, operations and maintenance, and primary and secondary waste generation; Continue to locate, verify, and incorporate technology performance data from other sources into the multimedia information system; and Develop the conceptual design for a dismantlement technology decision analysis tool for dismantlement technologies.

CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Hugh W. Rimmer

2004-05-12

This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

Research and technology, 1991. Langley Research Center

Science.gov (United States)

1992-01-01

The mission of the NASA Langley Research Center is to increase the knowledge and capability of the United States in a full range of aeronautics disciplines and in selected space disciplines. This mission will be accomplished by performing innovative research relevant to national needs and Agency goals, transferring technology to users in a timely manner, and providing development support to other United States Government agencies, industry, and other NASA centers. Highlights are given of the major accomplishments and applications that have been made during the past year. The highlights illustrate both the broad range of the research and technology (R&T) activities at NASA Langley Research Center and the contributions of this work toward maintaining United States leadership in aeronautics and space research.

CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2005-11-04

This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

Crosscutting Technology Development at the Center for Advanced Separation Technologies

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2006-09-30

This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2006-05-15

This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

Marshall Space Flight Center Technology Investments Overview

Science.gov (United States)

Tinker, Mike

2014-01-01

NASA is moving forward with prioritized technology investments that will support NASA's exploration and science missions, while benefiting other Government agencies and the U.S. aerospace enterprise. center dotThe plan provides the guidance for NASA's space technology investments during the next four years, within the context of a 20-year horizon center dotThis plan will help ensure that NASA develops technologies that enable its 4 goals to: 1.Sustain and extend human activities in space, 2.Explore the structure, origin, and evolution of the solar system, and search for life past and present, 3.Expand our understanding of the Earth and the universe and have a direct and measurable impact on how we work and live, and 4.Energize domestic space enterprise and extend benefits of space for the Nation.

Program strategy document for the Nuclear Materials Transportation Technology Center

International Nuclear Information System (INIS)

Jefferson, R.M.

1979-07-01

A multiyear program plan is presented which describes the program of the Nuclear Materials Transportation Technology Center (TIC) at Sandia Laboratories. The work element plans, along with their corresponding work breakdown structures, are presented for TTC activities in the areas of Technology and Information Center, Systems Development, Technology, and Institutional Issues for the years from 1979 to 1985

Digitization of Nuclear Explosion Seismograms from the Former Soviet Union

Science.gov (United States)

2015-03-30

seismograms recorded in the former Soviet Union was initiated in the 1990s under the International Science and Technology Centre ( ISTC ) project K-063...The Lamont-Doherty Observatory of Columbia University (LDEO) helped to organize that work, writing the proposal to ISTC , which involved the U.S.A...were determined under the ISTC CASRI Project. For Kyrgyzstan temporary stations the coordinates were based on reports and information provided by

Applied technology center business plan and market survey

Science.gov (United States)

Hodgin, Robert F.; Marchesini, Roberto

1990-01-01

Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

Science.gov (United States)

Nanzetta, Philip

1992-01-01

The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

Center for Advanced Separation Technology

Energy Technology Data Exchange (ETDEWEB)

Honaker, Rick

2013-09-30

The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, CAST is now a five-university consortium – Virginia Tech, West Virginia University, University of Kentucky, University of Utah and Montana Tech, - that is supported through U.S. DOE Cooperative Agreement No. DE-FE0000699, Center for Advanced Separation Technology. Much of the research to be conducted with Cooperative Agreement funds will be longer term, high-risk, basic research and will be carried out in two broad areas: Advanced Pre-Combustion Clean Coal Technologies and Gas-Gas Separations. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the five member universities. These were reviewed and the selected proposals were forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed below by category, along with abstracts from their final reports.

Center for Coastline Security Technology, Year-2

National Research Council Canada - National Science Library

Glegg, Stewart; Glenn, William; Furht, Borko; Beaujean, P. P; Frisk, G; Schock, S; VonEllenrieder, K; Ananthakrishnan, P; An, E; Granata, R

2007-01-01

...), the Imaging Technology Center, the Department of Computer Science and Engineering, and the University Consortium for Intermodal Transportation Safety and Security at Florida Atlantic University...

Building Technologies Research and Integration Center (BTRIC)

Data.gov (United States)

Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

SciDAC Visualization and Analytics Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Joy, Kenneth I. [Univ. of California, Davis, CA (United States)

2014-09-14

This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an "information big bang," which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies.

Customizing graphical user interface technology for spacecraft control centers

Science.gov (United States)

Beach, Edward; Giancola, Peter; Gibson, Steven; Mahmot, Ronald

1993-01-01

The Transportable Payload Operations Control Center (TPOCC) project is applying the latest in graphical user interface technology to the spacecraft control center environment. This project of the Mission Operations Division's (MOD) Control Center Systems Branch (CCSB) at NASA Goddard Space Flight Center (GSFC) has developed an architecture for control centers which makes use of a distributed processing approach and the latest in Unix workstation technology. The TPOCC project is committed to following industry standards and using commercial off-the-shelf (COTS) hardware and software components wherever possible to reduce development costs and to improve operational support. TPOCC's most successful use of commercial software products and standards has been in the development of its graphical user interface. This paper describes TPOCC's successful use and customization of four separate layers of commercial software products to create a flexible and powerful user interface that is uniquely suited to spacecraft monitoring and control.

Smart Grid Technology and Consumer Call Center Readiness

OpenAIRE

Schamber, Kelsey L.

2010-01-01

The following reasearch project deals with utility call center readiness to address customer concerns and questions about the Smart Grid and smart meter technology. Since consumer engagement is important for the benefits of the Smart Grid to be realized, the readiness and ability of utilities to answer consumer questions is an important issue. Assessing the readiness of utility call centers to address pertinant customer concerns was accomplished by calling utility call centers with Smart Grid...

Manufacturing Technology Information Analysis Center: Knowledge Is Strength

Science.gov (United States)

Safar, Michal

1992-01-01

The Center's primary function is to facilitate technology transfer within DoD, other government agencies and industry. The DoD has recognized the importance of technology transfer, not only to support specific weapon system manufacture, but to strengthen the industrial base that sustains DoD. MTIAC uses an experienced technical staff of engineers and information specialists to acquire, analyze, and disseminate technical information. Besides ManTech project data, MTIAC collects manufacturing technology from other government agencies, commercial publications, proceedings, and various international sources. MTIAC has various means of disseminating this information. Much of the technical data is on user accessible data bases. The Center researches and writes a number of technical reports each year and publishes a newsletter monthly. Customized research is performed in response to specific inquiries from government and industry. MTIAC serves as a link between Government and Industry to strengthen the manufacturing technology base through the dissemination of advanced manufacturing information.

Research and Technology at the John F. Kennedy Space Center 1993

Science.gov (United States)

1993-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1993 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. Major areas of research include material science, advanced software, industrial engineering, nondestructive evaluation, life sciences, atmospheric sciences, environmental technology, robotics, and electronics and instrumentation.

NCI Technology Transfer Center | TTC

Science.gov (United States)

The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners. With specialized teams, TTC guides the interactions of our partners from the point of discovery to patenting, from invention development to licensing. We play a key role in helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class researchers, facilities, and knowledge.

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

Science.gov (United States)

1999-01-01

Center Director Roy Bridges (standing, center) poses with members of the Disability Awareness and Action Working Group (DAAWG), which is holding the 1999 Technology Fair Oct. 20-21 at Kennedy Space Center. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

Center for BioBased Binders and Pollution Reduction Technology

Energy Technology Data Exchange (ETDEWEB)

Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

2013-07-01

Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

SciDAC visualization and analytics center for enabling technology

International Nuclear Information System (INIS)

Bethel, E Wes; Johnson, Chris; Joy, Ken; Ahern, Sean; Pascucci, Valerio; Childs, Hank; Cohen, Jonathan; Duchaineau, Mark; Hamann, Bernd; Hansen, Charles; Laney, Dan; Lindstrom, Peter; Meredith, Jeremy; Ostrouchov, George; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier

2007-01-01

The Visualization and Analytics Center for Enabling Technologies (VACET) focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang,' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision of VACET is to adapt, extend, create when necessary, and deploy visual data analysis solutions that are responsive to the needs of DOE's computational and experimental scientists. Our center is engineered to be directly responsive to those needs and to deliver solutions for use in DOE's large open computing facilities. The research and development directly target data understanding problems provided by our scientific application stakeholders. VACET draws from a diverse set of visualization technology ranging from production quality applications and application frameworks to state-of-the-art algorithms for visualization, analysis, analytics, data manipulation, and data management

The roles and functions of a lunar base Nuclear Technology Center

International Nuclear Information System (INIS)

Buden, D.; Angelo, J.A. Jr.

1991-01-01

This paper describes the roles and functions of a special Nuclear Technology Center which is developed as an integral part of a permanent lunar base. Numerous contemporary studies clearly point out that nuclear energy technology will play a major role in any successful lunar/Mars initiative program and in the overall establishment of humanity's solar system civilization. The key role of nuclear energy in the providing power has been recognized. A Nuclear Technology Center developed as part of of a permanent lunar base can also help bring about many other nuclear technology applications, such as producing radioisotopes for self-illumination, food preservation, waste sterilization, and medical treatment; providing thermal energy for mining, materials processing and agricultural; and as a source of emergency habitat power. Designing such a center will involve the deployment, operation, servicing and waste product management and disposal of megawatt class reactor power plants. This challenge must be met with a minimum of direct human support at the facility. Furthermore, to support the timely, efficient integration of this Nuclear Technology Center in the evolving lunar base infrastructure, an analog of such a facility will be needed here on Earth. 12 refs., 4 figs., 1 tab

Information and consulting center in plasma technologies

International Nuclear Information System (INIS)

Vizireanu, S.; Aldea, E.; Mitu, B.; Dinescu, G.

2001-01-01

Plasma technologies are clean, non-expensive, and easy to adapt to small-scale production. They are largely used in various modern sectors of research, industry, medicine, biology and environmental protection. At the present time a pressure to transfer the knowledge from education and research sectors toward the industrial ones was established by the financing policies at national and European levels. Nevertheless, mainly in the last decade, an informational gap sets up in Romania between the suppliers of know-how in the plasma technologies and their beneficiaries. The newly appearing companies have little knowledge about the possibilities of our research and education. In turn, the research and education sectors do not know what companies are using nowadays plasma technologies, what kinds of technologies are needed and what aspects should be stressed in educational activity. The Information and Consulting Center in Plasma Technologies is an infrastructure project aiming at gathering information and expertise in plasma technologies with emphasizing on the Romanian capabilities. The information is accessible via Internet at the address http://www.alpha2.infim.ro. By accessing the center web page one enters into the main menu or it is possible to navigate by choosing key words, as for instance: objectives, plasma diagnostics, plasma technologies, which are listed in a dedicated search box. The information is organized in databases. In the database frame there are three main categories, which lead to detailed information about: - Users of plasma technologies, the technology type, the address; - Suppliers of plasma technologies, including the main research institutes with links to the relating Internet sites; - Education and training centers including the universities and their departments dedicated to plasma physics. The expertise is organized in three categories. They are instrumentation and equipment, plasma diagnostics and plasma technologies. In the

The Center for Environmental Technology Innovative Technology Screening Process

International Nuclear Information System (INIS)

Bertrand, C.M.

1995-02-01

The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

Planning and Management of Technology Deployment Center

International Nuclear Information System (INIS)

Park, Jae Won; Joo, Po Kook; Kim, Jun Yeon and others

2005-08-01

The R and D contents are summarized as follows ; Models were set-up for transferring the developed technologies to the industry and managing technology deployment center to vitalize the commercialization and then the set-up model was tried to apply for transferring technologies for commercialization and to define interfaces between the R and D and industrial applications In this project, new products and processes were developed for promoting the commercialization. Infra-structures were firmly set-up for the venture company promotion and technology deployment developed during executing the proton Engineering frontier Project. Commercialization methodology connection with industrial companies were studied by outside specializing institute. Development of gem-stone coloring and new photo catalyst producing techniques are very high value-adding technologies, therefore, experimental and theoretical R and D were transacted simultaneously to obtain the originality of the technology. The theoretical R and D was committed to a specialist outside

The Advanced Technology Environmental Education Center Summer Fellows Institute.

Science.gov (United States)

Depken, Diane E.; Zeman, Catherine L.; Lensch, Ellen Kabat; Brown, Edward J.

2002-01-01

Describes the background, activities, and outcomes of the Advanced Technology Environmental Education Center (ATEEC) and its Summer Fellows Institutes as a model for disciplinary and cross-disciplinary infusion of environmental science and technology content, curriculum, and methods into the classroom. Presents experiences, themes, and activities…

Advertising Technology and Visual Attraction of Cities Centers

Directory of Open Access Journals (Sweden)

Inaam Albazzaz

2017-09-01

Full Text Available Advertising technology represents a component of elements of the visual attraction in the urban scape, made its way transmission process of messages between the ends of the source ofinformation (sender and the Destination information (receiver of the final recipient of themessage, It serves as a social marked and a means of cultural expression, It is part of the inalienable in creating identity and determine the spatial relationships and also is a reflection ofurban culture to the community. This technology has become an increasing feature of the present era, characterized as the era of the three revolutions: (the information revolution, the technologyrevolution, and the media revolution, Where it became an integral part of the visual system surrounding of urban our environment in which we live,, And it worked to change the contemporary urban experience through the attraction and love to stay and stimulating social interactions within a decade and urban spaces that contain the contemporary urban forms, and this is what it will focus the research. The research’s problem is determined by :there is no clear perception about the definition of advertisement technology and its impact on the urban scape of the city centers according the concept of visual attraction. And clarify the goal of research in : Definition advertising technology and determine the most important aspects and indicators according the concept of visual attraction of the city centers. To achieve this goal was adopted the following approach: building a conceptual framework for technology advertising through definition of the basic concepts of research and review the historical development of it within the framework of the urban scape, and then a study of the most important intellectual concepts associated represented by (communication theory and built in investigating this technology (communication channel aims to deliver a message or information from the sender to the receiver

Research and technology: 1994 annual report of the John F. Kennedy Space Center

Science.gov (United States)

1994-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1994 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. The Technology Programs and Commercialization Office (DE-TPO), (407) 867-3017, is responsible for publication of this report and should be contacted for any desired information regarding the advanced technology program.

Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

Crosscutting Technology Development at the Center for Advanced Separation Technologies

Energy Technology Data Exchange (ETDEWEB)

Christopher Hull

2009-10-31

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

Technology transfer program at the Morgantown Energy Technology Center: FY 87 program report

Energy Technology Data Exchange (ETDEWEB)

Brown, W.A.; Lessing, K.B.

1987-10-01

The Morgantown Energy Technology Center (METC), located in Morgantown, West Virginia, is an energy research center of the US Department of Energy's (DOE's) Office of Fossil Energy. The research and development work is different from research work conducted by other Government agencies. In DOE research, the Government is not the ultimate ''customer'' for the technologies developed; the ''customer'' is business and industry in the private sector. Thus, tehcnology transfer is a fundamental goal of the DOE. The mission of the Fossil Energy program is to enhance the use of the nations's fossil energy resources. METC's mission applies to certain technologies within the broad scope of technologies encompassed by the Office of Fossil Energy. The Government functions as an underwriter of risk and as a catalyst to stimulate the development of technologies and technical information that might otherwise proceed at a slower pace because of the high-risk nature of the research involved. The research programs and priorities are industry driven; the purpose is to address the perceived needs of industry such that industry will ultimately bring the technologies to the commercial market. As evidenced in this report, METC has an active and effective technology transfer program that is incorporated into all aspects of project planning and execution. Technology transfer at METC is a way of life---a part of everyday activities to further this goal. Each person has a charge to communicate the ideas from within METC to those best able to utilize that information. 4 figs., 20 tabs.

75 FR 80830 - Proposed Collection; Comment Request; Technology Transfer Center External Customer Satisfaction...

Science.gov (United States)

2010-12-23

... Request; Technology Transfer Center External Customer Satisfaction Survey (NCI) SUMMARY: In compliance...: Technology Transfer Center External Customer Satisfaction Survey (NCI). Type of Information Collection...: Obtain information on the satisfaction of TTC's external customers with TTC customer services; collect...

Applied wind energy research at the National Wind Technology Center

International Nuclear Information System (INIS)

Robinson, M.C.; Tu, P.

1997-01-01

Applied research activities currently being undertaken at the National Wind Technology Center, part of the National Renewable Energy Laboratory, in the United States, are divided into several technical disciplines. An integrated multi-disciplinary approach is urged for the future in order to evaluate advanced turbine designs. The risk associated with any new turbine development program can thus be mitigated through the provision of the advanced technology, analysis tools and innovative designs available at the Center, and wind power can be promoted as a viable renewable energy alternative. (UK)

Mission & Role | NCI Technology Transfer Center | TTC

Science.gov (United States)

The NCI TTC serves as the focal point for implementing the Federal Technology Transfer Act to utilize patents as incentive for commercial development of technologies and to establish research collaborations and licensing among academia, federal laboratories, non-profit organizations, and industry. The TTC supports technology development activities for the National Cancer Institute and nine other NIH Institutes and Centers. TTC staff negotiate co-development agreements and licenses with universities, non-profit organizations, and pharmaceutical and biotechnology companies to ensure compliance with Federal statutes, regulations and the policies of the National Institutes of Health. TTC also reviews employee invention reports and makes recommendations concerning filing of domestic and foreign patent applications. | [google6f4cd5334ac394ab.html

St. Luke's Medical Center: technologizing health care

International Nuclear Information System (INIS)

Tumanguil, S.S.

1994-01-01

The computerization of the St. Luke's Medical Center improved the hospital administration and management, particularly in nuclear medicine department. The use of computer-aided X-ray simulator machine and computerized linear accelerator machine in diagnosing and treating cancer are the most recent medical technological breakthroughs that benefited thousands of Filipino cancer patients. 4 photos

Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation

DEFF Research Database (Denmark)

already spent on these technologies also lead to commercial success. The project ‘Test and Approval Center for Fuel Cell and Hydrogen Technologies: Phase I. Initiation’ was aiming at starting with the Establishment of such a center. The following report documents the achievements within the project...... of the fluctuating wind energy. As the fuel cell and hydrogen technologies come closer to commercialization, development of testing methodology, qualified testing and demonstration become increasingly important. Danish industrial players have expressed a strong need for support in the process to push fuel cell...... and hydrogen technologies from the research and development stage into the commercial domain. A Center to support industry with test, development, analysis, approval, certification, consultation, and training in the areas of fuel cell and hydrogen technologies was needed. Denmark has demonstrated leading...

SAVANNAH RIVER TECHNOLOGY CENTER MONTHLY REPORT AUGUST 1992

Energy Technology Data Exchange (ETDEWEB)

Ferrell, J.M.

1999-06-21

'This monthly report summarizes Programs and Accomplishments of the Savannah River Technology Center in support of activities at the Savannah River Site. The following categories are addressed: Reactor, Tritium, Separations, Environmental, Waste Management, General, and Items of Interest.'

SLJ's Technology Survey 2006: New Technologies--Like Blogs and Wikis--Are Taking Their Place in the School Media Center

Science.gov (United States)

Brewer, Sally; Milam, Peggy

2006-01-01

This article presents findings from the School Library Journal's 2006 national technology survey that investigated the trend in today's library media centers. As this study demonstrates, technology continues to be a significant aspect of K-12 media centers. Despite restricted funding and schedules stretched to the limit, media specialists have…

Episode-Centered Guidelines for Teacher Belief Change toward Technology Integration

Science.gov (United States)

Er, Erkan; Kim, ChanMin

2017-01-01

Teachers' episodic memories influence their beliefs. The investigation of episodic memories can help identify the teacher beliefs that limit technology-integration. We propose the Episode-Centered Belief Change (ECBC) model that utilizes teachers' episodic memories for changing beliefs impeding effective technology integration. We also propose…

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

Science.gov (United States)

1999-01-01

Center Director Roy Bridges stops to pet one of the dogs that serves with Canine Companions for Independence, a vendor displaying its capabilities at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Standing at the right is Carol Cavanaugh, with KSC Public Services; behind Bridges is Nancie Strott (left), a multi-media specialist with Dynacs and chairperson of the Fair, and Sterling Walker (right), director of Engineering Development and chairman of DAAWG. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the other vendors participating are Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

International Experience of the Establishing Technology Transfer Centers at the Universities

Directory of Open Access Journals (Sweden)

Lysenko, V.S.

2015-01-01

Full Text Available The analysis of the experience of creation and operation of technology transfer centers on the basis of US universities with the aim of using positive methods for the creation of such centers in Ukraine is presented.

VACET: Proposed SciDAC2 Visualization and Analytics Center for Enabling Technologies

International Nuclear Information System (INIS)

Bethel, W; Johnson, C; Hansen, C; Parker, S; Sanderson, A; Silva, C; Tricoche, X; Pascucci, V; Childs, H; Cohen, J; Duchaineau, M; Laney, D; Lindstrom, P; Ahern, S; Meredith, J; Ostrouchov, G; Joy, K; Hamann, B

2006-01-01

This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang',' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies

Technology for the Stars: Extending Our Reach. [Research and Technology: 1995 Annual Report of the Marshall Space Flight Center.

Science.gov (United States)

1996-01-01

Marshall Space Flight Center's (MSFC's) Advanced Studies, Research, Technology, and Technology Transfer projects are summarized in this report. The focus of the report is on the three spotlights at MSFC in 1995: space transportation technology, microgravity research, and technology transfer.

User-centered Technologies For Blind Children

Directory of Open Access Journals (Sweden)

Jaime Sánchez

2008-01-01

Full Text Available The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathematical skills, navigation and orientation, and problem solving of blind children. Findings indicate significant improvements in learning and cognition from using audio-based tools specially tailored for the blind. That is, technologies for blind children, carefully tailored through user-centered design approaches, can make a significant contribution to cognitive development of these children. This paper contributes new insight into the design and implementation of audio-based virtual environments to facilitate learning and cognition in blind children.

76 FR 8371 - Notice Correction; Generic Submission of Technology Transfer Center (TTC) External Customer...

Science.gov (United States)

2011-02-14

... Submission of Technology Transfer Center (TTC) External Customer Satisfaction Surveys (NCI) The Federal... project titled, ``Technology Transfer Center (TTC) External Customer Satisfaction Survey (NCI)'' was... will include multiple customer satisfaction surveys over the course of three years. At this time, only...

Centers for manufacturing technology: Industrial Advisory Committee Review

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

Energy Technology Data Exchange (ETDEWEB)

Yoon, Roe-Hoan; Hull, Christopher

2014-09-30

The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

Science.gov (United States)

The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

Science.gov (United States)

2011-01-12

...-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW-Chrysler Technical Training Center Technology Training Joint Programs Staff, Warren, MI; Notice of Revised... investigation, the Department confirmed that the proportion of Technology Training Joint Programs Staff...

Program strategy document for the nuclear materials. Transportation Technology Center (FY 80)

International Nuclear Information System (INIS)

Jefferson, R.M.

1980-04-01

The TTC's program is divided into four principal areas, Technology and Information Center, Systems Development, Technology, and Institutional Issues. These areas are broken into activities, elements, and subelements which are delineated in this document

CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2005-01-20

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

System analysis of nuclear safety of VVER reactor with MOX fuel

Energy Technology Data Exchange (ETDEWEB)

Klimov, A.D.; Zharkov, V.P.; Suslov, I.R. [Russia, Moscow Malaya Krasnoselskaya St. (Russian Federation); Boyarinov, V.F.; Kevrolev, V.V.; Tchibinyaev, A.V.; Tsibulskiy, V.F. [RRC KI, Russia, Moscow (Russian Federation); Kochurov, B.P. [ITEP, Russia, Moscow (Russian Federation); Giovanni, B. [NFPSC, FRAMATOME (France)

2005-07-01

The report presents a short summary of the results achieved in the ISTC (International Science and Technology Center) project 'System analysis of nuclear safety of VVER reactor with MOX fuel' (April 2005). The studies within the project are of a systematic character and include the solutions of 15 tasks. The report gives an overview of the major blocks of these tasks: neutron transport equation solution; calculations of isotopic vectors, analysis of the impact of uncertainties on predicted reactor functionals. The calculation methods, the verification results and the corresponding codes are briefly described. (authors)

La recherche fondamentale plutôt que la technologie de l'armement: Le CERN a mis la dernière main à des contrats avec le CIST

CERN Multimedia

CERN Press Office. Geneva

1999-01-01

On Monday, 22 November, major collaboration contracts were finalized between CERN and the ISTC, the International Science and Technology Centre, which has its headquarters in Moscow. These contracts, worth more than 12 million Swiss Francs, are a large step forward in the cooperation between these two institutions. The agreement, which almost doubles the financial support for the ISTC Partner Project, will result in new technical equipment for CERN's latest project, the Large Hadron Collider (LHC).

Establishment of the Center for Advanced Separation Technologies

Energy Technology Data Exchange (ETDEWEB)

Christopher E. Hull

2006-09-30

This Final Technical Report covers the eight sub-projects awarded in the first year and the five projects awarded in the second year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Science.gov (United States)

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

78 FR 65300 - Notice of Availability (NOA) for General Purpose Warehouse and Information Technology Center...

Science.gov (United States)

2013-10-31

... (NOA) for General Purpose Warehouse and Information Technology Center Construction (GPW/IT)--Tracy Site... proposed action to construct a General Purpose Warehouse and Information Technology Center at Defense..., Suite 02G09, Alexandria, VA 22350- 3100. FOR FURTHER INFORMATION CONTACT: Ann Engelberger at (703) 767...

Mobile STEMship Discovery Center: K-12 Aerospace-Based Science, Technology, Engineering, and Mathematics (STEM) Mobile Teaching Vehicle

Science.gov (United States)

2015-08-03

AND SUBTITLE Mobile STEMship Discovery Center: K-12 Aerospace-Based Science, Technology, Engineering, and Mathematics (STEM) Mobile Teaching Vehicle...Center program to be able to expose Science Technology, Engineering and Mathematics (STEM) space-inspired science centers for DC Metro beltway schools

Digital Technologies Supporting Person-Centered Integrated Care - A Perspective.

Science.gov (United States)

Øvretveit, John

2017-09-25

Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning "digitalisation" of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

NASA Johnson Space Center SBIR STTR Program Technology Innovations

Science.gov (United States)

Krishen, Kumar

2007-01-01

The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

Unifying a fragmented effort: a qualitative framework for improving international surgical teaching collaborations.

Science.gov (United States)

Fallah, Parisa Nicole; Bernstein, Mark

2017-09-07

Access to adequate surgical care is limited globally, particularly in low- and middle-income countries (LMICs). To address this issue, surgeons are becoming increasingly involved in international surgical teaching collaborations (ISTCs), which include educational partnerships between surgical teams in high-income countries and those in LMICs. The purpose of this study is to determine a framework for unifying, systematizing, and improving the quality of ISTCs so that they can better address the global surgical need. A convenience sample of 68 surgeons, anesthesiologists, physicians, residents, nurses, academics, and administrators from the U.S., Canada, and Norway was used for the study. Participants all had some involvement in ISTCs and came from multiple specialties and institutions. Qualitative methodology was used, and participants were interviewed using a pre-determined set of open-ended questions. Data was gathered over two months either in-person, over the phone, or on Skype. Data was evaluated using thematic content analysis. To organize and systematize ISTCs, participants reported a need for a centralized/systematized process with designated leaders, a universal data bank of current efforts/progress, communication amongst involved parties, full-time administrative staff, dedicated funds, a scholarly approach, increased use of technology, and more research on needs and outcomes. By taking steps towards unifying and systematizing ISTCs, the quality of ISTCs can be improved. This could lead to an advancement in efforts to increase access to surgical care worldwide.

Energy Science and Technology Software Center

Energy Technology Data Exchange (ETDEWEB)

Kidd, E.M.

1995-03-01

The Energy Science and Technology Software Center (ESTSC), is the U.S. Department of Energy`s (DOE) centralized software management facility. It is operated under contract for the DOE Office of Scientific and Technical Information (OSTI) and is located in Oak Ridge, Tennessee. The ESTSC is authorized by DOE and the U.S. Nuclear Regulatory Commission (NRC) to license and distribute DOE-and NRC-sponsored software developed by national laboratories and other facilities and by contractors of DOE and NRC. ESTSC also has selected software from the Nuclear Energy Agency (NEA) of the Organisation for Economic Cooperation and Development (OECD) through a software exchange agreement that DOE has with the agency.

Center of Nuclear-Physics Data (CNPD) RFNC-VNIIEF. Status report. P5

International Nuclear Information System (INIS)

Dunaeva, S.A.

2001-01-01

The correction and translation to the EXFOR format of experimental data and the compilation of the new experimental data were performed. The EXFOR library is being prepared. Experimental data compilation and checking have been made using the VMS operating system with the help of NNDC software. Cooperation with the NNDC lasted two months. Charged particle data from the 'Nuclear Physics' have been scanned (1980 - 2000) and compiled. In collaboration with BBDC a project to CRDF were prepared. The results of this efforts will be cleared up in November 2001. In cooperation with NNDC and IAEA, the discussion about the migration strategy for the existing databases is taking place. The evaluation activity was stimulated by participation of the CNPD staff in some international projects. New experimental data were compared with the data from the literature and from EXFOR and ENDF libraries. Results of the experiments were compiled into EXFOR in collaboration with CJD. In the framework of the ISTC No.731 project new experiments have been performed and adopted data prepared for neutron-gamma-production cross-sections on 28 nuclei. According to the ISTC No.1145 project the evaluated nuclear library for transmutation (TENDL) was prepared. 103 isotopes including 4 effective fission fragments from the following world libraries of evaluated constants ( ENDF/B-IV, ENDL-82, JENDL-3, CENDL-2, BROND-2) were involved into the current version of TENDL library. The methods and criteria of data selection, the content of TENDL library and functional potentialities of the special program shell are described in the report that will be presented in October 2001 at the International Conference in Japan ('Nuclear Data and Technology')

Development of a National Center for Hydrogen Technology. A Summary Report of Activities Completed at the National Center for Hydrogen Technology - Year 6

Energy Technology Data Exchange (ETDEWEB)

Holmes, Michael [Univ. of North Dakota, Grand Forks, ND (United States)

2012-08-01

The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology (NCHT) since 2005 under a Cooperative Agreement with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research on hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding for hydrogen-related projects ($24 million for projects in the NCHT, which includes federal and corporate partner development funds) involving more than 85 partners (27 with the NCHT). The NCHT Program's nine activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan that refers to realistic testing of technologies at adequate scale, process intensification, and contaminant control. A number of projects have been completed that range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in Year 6 of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

Volpe Center Office of Research and Technology Applications (ORTA) : FY 2013 Annual Report

Science.gov (United States)

2013-12-01

Technology transfer activities performed by the Volpe National Transportation Systems Center during fiscal year 2013 in fulfillment of statutory Office of Research and Technology Applications (ORTA) responsibilities are summarized in this report. Dur...

Role of national centers of research and development in nuclear technology transfer

International Nuclear Information System (INIS)

Graf, J.-J.; Millies, Pierre.

1977-01-01

National Research Centers are shown to play a leading role in nuclear technology transfer, whatever may be the directing scheme of nuclear development in the country envisaged. The first act of the Center consists in training specialists in the various nuclear fields. It must ensure the transfer of technological knowledge towards industry (in metallurgy, mechanics, electronics) and other nuclear auxiliary techniques, together with the transfer towards administration (laws). A simplified scheme of nuclear development strategy based on the French scheme (the French Atomic Energy Commission (CEA) with its subsidiary Companies) is presented that is usable for developing countries [fr

Copper Disk Manufactured at the Space Optics Manufacturing and Technology Center

Science.gov (United States)

2001-01-01

This photograph shows Wes Brown, Marshall Space Flight Center's (MSFC's) lead diamond tuner, an expert in the science of using diamond-tipped tools to cut metal, inspecting the mold's physical characteristics to ensure the uniformity of its more than 6,000 grooves. This king-size copper disk, manufactured at the Space Optics Manufacturing and Technology Center (SOMTC) at MSFC, is a special mold for making high resolution monitor screens. This master mold will be used to make several other molds, each capable of forming hundreds of screens that have a type of lens called a fresnel lens. Weighing much less than conventional optics, fresnel lenses have multiple concentric grooves, each formed to a precise angle, that together create the curvature needed to focus and project images. The MSFC leads NASA's space optics manufacturing technology development as a technology leader for diamond turning. The machine used to manufacture this mold is among many one-of-a-kind pieces of equipment of MSFC's SOMTC.

Annual report of nuclear technology and education center. April 1, 2002 - March 31, 2003

International Nuclear Information System (INIS)

2003-10-01

This report summarizes the activities of Nuclear Technology and Education Center (NuTEC) in Japan Atomic Energy Research Institute in FY 2002. It includes the domestic educational activities in Tokyo Education Center in Komagome Tokyo for RI and radiation engineers and Tokai Education Center in Tokai for nuclear engineers, and the international training activities for Asia-Pacific region which were planned and administrated by International Technology Transfer Division. The new course so called 'Introductory Course for the Use and the Experiment of Neutron' was started with good appreciation by the participants. All scheduled course plan in Tokyo Education Center and Tokai Education Center was accomplished and the total number of the trainee of both Center was 1,297. The courses for RI and radiation engineers implemented in Tokyo Education Center were closed in this FY and transferred to Tokai Establishment in next FY where the course will be integrated with the ones at Tokai Education Center. The land of Tokyo Education Center will be returned to land-owner by the end of FY 2003 after dismantlement of the facilities. The equipments and instruments used in Tokyo Education Center were transferred to Tokai Education Center after finishing all courses in Tokyo in this FY. The improvement and re-arrangement of the facilities in Tokyo Education Center were proceeded to prepare the courses from Tokyo Education Center. (author)

Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

International Nuclear Information System (INIS)

1980-08-01

A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described

Two Micron Laser Technology Advancements at NASA Langley Research Center

Science.gov (United States)

Singh, Upendra N.

2010-01-01

An Independent Laser Review Panel set up to examine NASA s space-based lidar missions and the technology readiness of lasers appropriate for space-based lidars indicated a critical need for an integrated research and development strategy to move laser transmitter technology from low technical readiness levels to the higher levels required for space missions. Based on the review, a multiyear Laser Risk Reduction Program (LRRP) was initiated by NASA in 2002 to develop technologies that ensure the successful development of the broad range of lidar missions envisioned by NASA. This presentation will provide an overview of the development of pulsed 2-micron solid-state laser technologies at NASA Langley Research Center for enabling space-based measurement of wind and carbon dioxide.

Tiger Team Assessment, Energy Technology Engineering Center

International Nuclear Information System (INIS)

1991-04-01

The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies

Tiger Team Assessment, Energy Technology Engineering Center

Energy Technology Data Exchange (ETDEWEB)

1991-04-01

The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

Evaluation of Technological Trends and Demands of the Manufacturing Industry to a Center of R&D&I

Directory of Open Access Journals (Sweden)

Leone Peter Correia da Silva Andrade

2015-10-01

Full Text Available The manufacturing industry is fairly representative in the Brazilian economy. The research activities in technology, development and innovation promoted by technology centers are of great importance to boost the competitiveness of this segment. In this context, this work aims presenting the development of the strategic planning for a Center of R&D&I (Research & Development & Innovation, looking 20 years ahead, on a macro level, creating a master plan which summarizes the future focus areas of competence for technology research, development and innovation, coping with manufacturing trends, using a participative workshop approach. Thus, it is expected that this center offer integrated technological solutions with high added value that promote the development and competitiveness of the manufacturing industry, in the prospects for medium and long term. In order to achieve the project objectives taking the principle of strategic planning was followed. On the one hand, focus was placed on the internal perspective analyzing the current status of the Center. On the other hand, the environment of the Center (external perspective was analyzed. Matching the analysis results regarding both perspectives future competence areas were derived, according to global technological trends as well as national and local industrial demand. Thus, the competencies required to be developed by a technology center to meet the manufacturing industry over the next twenty years would be derived.

Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

Energy Technology Data Exchange (ETDEWEB)

Davidson, Ronald C.

1980-08-01

A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

User-Centered Design and Interactive Health Technologies for Patients

Science.gov (United States)

De Vito Dabbs, Annette; Myers, Brad A.; Mc Curry, Kenneth R.; Dunbar-Jacob, Jacqueline; Hawkins, Robert P.; Begey, Alex; Dew, Mary Amanda

2010-01-01

Despite recommendations that patients be involved in the design and testing of health technologies, few reports describe how to involve patients in systematic and meaningful ways to ensure that applications are customized to meet their needs. User-centered design (UCD) is an approach that involves end-users throughout the development process so that technology support tasks, are easy to operate, and are of value to users. In this paper we provide an overview of UCD and use the development of Pocket Personal Assistant for Tracking Health (Pocket PATH), to illustrate how these principles and techniques were applied to involve patients in the development of this interactive health technology. Involving patient-users in the design and testing ensured functionality and usability, therefore increasing the likelihood of promoting the intended health outcomes. PMID:19411947

A future perspective on technological obsolescenceat NASA, Langley Research Center

Science.gov (United States)

Mcintyre, Robert M.

1990-01-01

The present research effort was the first phase of a study to forecast whether technological obsolescence will be a problem for the engineers, scientists, and technicians at NASA Langley Research Center (LaRC). There were four goals of the research: to review the literature on technological obsolescence; to determine through interviews of division chiefs and branch heads Langley's perspective on future technological obsolescence; to begin making contacts with outside industries to find out how they view the possibility of technological obsolescence; and to make preliminary recommendations for dealing with the problem. A complete description of the findings of this research can be reviewed in a technical report in preparation. The following are a small subset of the key findings of the study: NASA's centers and divisions vary in their missions and because of this, in their capability to control obsolescence; research-oriented organizations within NASA are believed by respondents to keep up to date more than the project-oriented organizations; asked what are the signs of a professional's technological obsolescence, respondents had a variety of responses; top performing scientists were viewed as continuous learners, keeping up to date by a variety of means; when asked what incentives were available to aerospace technologists for keeping up to data, respondents specified a number of ideas; respondents identified many obstacles to professionals' keeping up to date in the future; and most respondents expressed some concern for the future of the professionals at NASA vis a vis the issue of professional obsolescence.

Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

Science.gov (United States)

O'Neil, Dara

2002-01-01

Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

Overview of Stirling Technology Research at NASA Glenn Research Center

Science.gov (United States)

Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

2016-01-01

Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

NASA Centers and Universities Collaborate Through Smallsat Technology Partnerships

Science.gov (United States)

Cockrell, James

2018-01-01

The Small Spacecraft Technology (SST) Program within the NASA Space Technology Mission Directorate is chartered develop and demonstrate the capabilities that enable small spacecraft to achieve science and exploration missions in "unique" and "more affordable" ways. Specifically, the SST program seeks to enable new mission architectures through the use of small spacecraft, to expand the reach of small spacecraft to new destinations, and to make possible the augmentation existing assets and future missions with supporting small spacecraft. The SST program sponsors smallsat technology development partnerships between universities and NASA Centers in order to engage the unique talents and fresh perspectives of the university community and to share NASA experience and expertise in relevant university projects to develop new technologies and capabilities for small spacecraft. These partnerships also engage NASA personnel in the rapid, agile and cost-conscious small spacecraft approaches that have evolved in the university community, as well as increase support to university efforts and foster a new generation of innovators for NASA and the nation.

Participation of the Republic of Kazakhstan in the projects: outside view

International Nuclear Information System (INIS)

Kontzen, Zh.P.

2001-01-01

Non-proliferation of mass destruction weapon serves the special condition for creators of International Scientific-Technical Center (ISTC) in Moscow. In this relation the ISTC fulfills their task by means of providing of funds for supporting of the scientists of former Soviet Union were working with nuclear weapon, by turning them to the peaceful activity. As well as this is facilitating to maintenance of relations between scientists. Formulas of cooperation such as attraction of foreign collaborators for fulfilment projects or implementation of plans for real cooperation were sufficient useful in this relation. Republic of Kazakhstan - like other CIS countries - was taking active part in proposals presentation and successfully working out that were ratified. It is stressed the ISTC projects contribution into progressive transmission toward to independence of Kazakhstan Scientific-Technical System as well as technical progress, required for the Republic prosperity in both the industrial and the social (health, environment) aspects

New Cryogenic Optical Test Capability at Marshall Space Flight Center's Space Optics Manufacturing Technology Center

Science.gov (United States)

Kegley, Jeff; Burdine, Robert V. (Technical Monitor)

2002-01-01

A new cryogenic optical testing capability exists at Marshall Space Flight Center's Space Optics Manufacturing Technology Center (SOMTC). SOMTC has been performing optical wavefront testing at cryogenic temperatures since 1999 in the X-ray Cryogenic Test Facility's (XRCF's) large vacuum chamber. Recently the cryogenic optical testing capability has been extended to a smaller vacuum chamber. This smaller horizontal cylindrical vacuum chamber has been outfitted with a helium-cooled liner that can be connected to the facility's helium refrigeration system bringing the existing kilowatt of refrigeration capacity to bear on a 1 meter diameter x 2 meter long test envelope. Cryogenic environments to less than 20 Kelvin are now possible in only a few hours. SOMTC's existing instruments (the Instantaneous Phase-shifting Interferometer (IPI) from ADE Phase-Shift Technologies and the PhaseCam from 4D Vision Technologies) view the optic under test through a 150 mm clear aperture BK-7 window. Since activation and chamber characterization tests in September 2001, the new chamber has been used to perform a cryogenic (less than 30 Kelvin) optical test of a 22.5 cm diameter x 127 cm radius of curvature Si02 mirror, a cryogenic survival (less than 30 Kelvin) test of an adhesive, and a cryogenic cycle (less than 20 Kelvin) test of a ULE mirror. A vibration survey has also been performed on the test chamber. Chamber specifications and performance data, vibration environment data, and limited test results will be presented.

How You Can Partner with NIH | NCI Technology Transfer Center | TTC

Science.gov (United States)

NCI Technology Transfer Center (TTC) provides an array of agreements to support the National Cancer Institute's partnering. Deciding which type of agreement to use can be a challenge: CRADA, MTA, collaboration, agreement, CTA, Materials-CRADA

Career and Technology Center Honors Julie Hartman | Poster

Science.gov (United States)

By Carolynne Keenan, Contributing Writer On May 7, Julie Hartman was honored by the Frederick County Career and Technology Center (CTC) for her support of the CTC’s Biomedical Sciences Program. As an education program specialist for Outreach and Special Programs at NCI at Frederick, Hartman is responsible for NCI at Frederick’s participation in the program, which is designed to offer Frederick County high school students hands-on, practical laboratory experience beyond the typical classroom setting. 

ESTABLISHMENT OF THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

Energy Technology Data Exchange (ETDEWEB)

Hugh W. Rimmer

2003-07-01

Technical Progress Report describes progress made on the eight sub-projects awarded in the first year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of activity only.

Volpe Center Office of Research and Technology Applications (ORTA) : fiscal year 2014 annual report

Science.gov (United States)

2014-12-01

Technology transfer activities performed by the Volpe National Transportation Systems Center during fiscal year 2014 in fulfillment of statutory Office of Research and Technology Applications (ORTA) responsibilities are summarized in this report.

Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

Directory of Open Access Journals (Sweden)

John Øvretveit

2017-09-01

Full Text Available Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care.

Digital Technologies Supporting Person-Centered Integrated Care – A Perspective

Science.gov (United States)

2017-01-01

Shared electronic health and social care records in some service systems are already showing some of the benefits of digital technology and digital data for integrating health and social care. These records are one example of the beginning “digitalisation” of services that gives a glimpse of the potential of digital technology and systems for building coordinated and individualized integrated care. Yet the promise has been greater than the benefits, and progress has been slow compared to other industries. This paper describes for non-technical readers how information technology was used to support integrated care schemes in six EU services, and suggests practical ways forward to use the new opportunities to build person-centered integrated care. PMID:29588629

Patient safety goals for the proposed Federal Health Information Technology Safety Center.

Science.gov (United States)

Sittig, Dean F; Classen, David C; Singh, Hardeep

2015-03-01

The Office of the National Coordinator for Health Information Technology is expected to oversee creation of a Health Information Technology (HIT) Safety Center. While its functions are still being defined, the center is envisioned as a public-private entity focusing on promotion of HIT related patient safety. We propose that the HIT Safety Center leverages its unique position to work with key administrative and policy stakeholders, healthcare organizations (HCOs), and HIT vendors to achieve four goals: (1) facilitate creation of a nationwide 'post-marketing' surveillance system to monitor HIT related safety events; (2) develop methods and governance structures to support investigation of major HIT related safety events; (3) create the infrastructure and methods needed to carry out random assessments of HIT related safety in complex HCOs; and (4) advocate for HIT safety with government and private entities. The convening ability of a federally supported HIT Safety Center could be critically important to our transformation to a safe and effective HIT enabled healthcare system. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Personalized Integrated Educational System: Technology Functions for the Learner- Centered Paradigm of Education

Science.gov (United States)

Reigeluth, Charles M.; Aslan, Sinem; Chen, Zengguan; Dutta, Pratima; Huh, Yeol; Lee, Dabae; Lin, Chun-Yi; Lu, Ya-Huei; Min, Mina; Tan, Verily; Watson, Sunnie Lee; Watson, William R.

2015-01-01

The learner-centered paradigm of instruction differs in such fundamental ways from the teacher-centered paradigm that it requires technology to serve very different functions. In 2006, a research team at Indiana University began to work on identifying those functions and published their results in 2008. Subsequently, the team elaborated and…

Infrared Imaging Camera Final Report CRADA No. TC02061.0

Energy Technology Data Exchange (ETDEWEB)

Roos, E. V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Nebeker, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-08

This was a collaborative effort between the University of California, Lawrence Livermore National Laboratory (LLNL) and Cordin Company (Cordin) to enhance the U.S. ability to develop a commercial infrared camera capable of capturing high-resolution images in a l 00 nanoseconds (ns) time frame. The Department of Energy (DOE), under an Initiative for Proliferation Prevention (IPP) project, funded the Russian Federation Nuclear Center All-Russian Scientific Institute of Experimental Physics (RFNC-VNIIEF) in Sarov. VNIIEF was funded to develop a prototype commercial infrared (IR) framing camera and to deliver a prototype IR camera to LLNL. LLNL and Cordin were partners with VNIIEF on this project. A prototype IR camera was delivered by VNIIEF to LLNL in December 2006. In June of 2007, LLNL and Cordin evaluated the camera and the test results revealed that the camera exceeded presently available commercial IR cameras. Cordin believes that the camera can be sold on the international market. The camera is currently being used as a scientific tool within Russian nuclear centers. This project was originally designated as a two year project. The project was not started on time due to changes in the IPP project funding conditions; the project funding was re-directed through the International Science and Technology Center (ISTC), which delayed the project start by over one year. The project was not completed on schedule due to changes within the Russian government export regulations. These changes were directed by Export Control regulations on the export of high technology items that can be used to develop military weapons. The IR camera was on the list that export controls required. The ISTC and Russian government, after negotiations, allowed the delivery of the camera to LLNL. There were no significant technical or business changes to the original project.

Accelerated Adoption of Advanced Health Information Technology in Beacon Community Health Centers.

Science.gov (United States)

Jones, Emily; Wittie, Michael

2015-01-01

To complement national and state-level HITECH Act programs, 17 Beacon communities were funded to fuel community-wide use of health information technology to improve quality. Health centers in Beacon communities received supplemental funding. This article explores the association between participation in the Beacon program and the adoption of electronic health records. Using the 2010-2012 Uniform Data System, trends in health information technology adoption among health centers located within and outside of Beacon communities were explored using differences in mean t tests and multivariate logistic regression. Electronic health record adoption was widespread and rapidly growing in all health centers, especially quality improvement functionalities: structured data capture, order and results management, and clinical decision support. Adoption lagged for functionalities supporting patient engagement, performance measurement, care coordination, and public health. The use of advanced functionalities such as care coordination grew faster in Beacon health centers, and Beacon health centers had 1.7 times higher odds of adopting health records with basic safety and quality functionalities in 2010-2012. Three factors likely underlie these findings: technical assistance, community-wide activation supporting health information exchange, and the layering of financial incentives. Additional technical assistance and community-wide activation is needed to support the use of functionalities that are currently lagging. © Copyright 2015 by the American Board of Family Medicine.

Are health centers in Thailand ready for health information technology? : a national survey.

Science.gov (United States)

Kijsanayotin, Boonchai; Speedie, Stuart

2006-01-01

The Thailand universal health care coverage scheme was instituted in 2001 and The Thailand Ministry of Public Health (MOPH) is restructuring its information systems to support this reform. The MOPH anticipates developing computerized health information systems which can provide information for administration tasks and can improve both healthcare delivery and public health services. To achieve these target goals, knowledge about users and organizations is vital. The knowledge of how health center workers currently use information technology (IT), their knowledge of IT, and acceptance of IT are not only beneficial to policy makers but also to system designers and implementers. The primary objective of this study is to learn how health centers in Thailand use IT, the level of basic IT knowledge among their workers, and their acceptance of health IT. We surveyed a random cross sectional sample of 1,607 health centers representing the total of 9,806 in Thailand in 2005. With an 82% response rate, the preliminary results indicate that information technology usage is pervasive in health centers. The respondents showed a moderately high degree of health information technology acceptance with a modest level of basic IT knowledge. There were no differences in degrees of acceptance among the four geographic regions. The mean score of "intention to use IT" was 5.6 on a scale of 7 and the average basic IT knowledge score was 13 out of 20. These results suggests the possibility of project success if the national health center information system projects are developed and implemented.

Scientific Data Management Center for Enabling Technologies

Energy Technology Data Exchange (ETDEWEB)

Vouk, Mladen A.

2013-01-15

Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Fortunately, the data management problems encountered by most scientific domains are common enough to be addressed through shared technology solutions. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation, analysis, or visualization engine. These processes are complicated by the fact that scientific data are structured differently for specific application domains, and are stored in specialized file formats. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Specialized feature discovery and statistical analysis techniques are needed before the data can be understood or visualized. Furthermore, interactive analysis requires techniques for efficiently selecting subsets of the data. Finally, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration. The SDM center was established under the SciDAC program to address these issues. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced

Recent advances in Ni-H2 technology at NASA Lewis Research Center

Science.gov (United States)

Gonzalezsanabria, O. D.; Britton, D. L.; Smithrick, J. J.; Reid, M. A.

1986-01-01

The NASA Lewis Research Center has concentrated its efforts on advancing the Ni-H2 system technology for low Earth orbit applications. Component technology as well as the design principles were studied in an effort to understand the system behavior and failure mechanisms in order to increase performance and extend cycle life. The design principles were previously addressed. The component development is discussed, in particular the separator and nickel electrode and how these efforts will advance the Ni-H2 system technology.

Final Report for 'Center for Technology for Advanced Scientific Component Software'

International Nuclear Information System (INIS)

Shasharina, Svetlana

2010-01-01

The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

Sex disparities in tuberculosis suspect evaluation: a cross-sectional analysis in rural Uganda.

Science.gov (United States)

Miller, C R; Davis, J L; Katamba, A; Sserwanga, A; Kakeeto, S; Kizito, F; Cattamanchi, A

2013-04-01

Six primary health care centers in rural Uganda. To compare the quality of tuberculosis (TB) evaluation for men and women presenting to primary health care facilities in high-burden settings. Cross-sectional study using indicators derived from the International Standards of Tuberculosis Care (ISTC) to compare the quality of TB evaluation services provided to men and women. Of 161 230 patient visits between January 2009 and December 2010, 112 329 (69.7%) were women. We considered 3308 (2.1%) patients with cough ≥2 weeks as TB suspects, of whom 1871 (56.6%) were women. Female TB suspects were less likely to be referred for sputum smear examination (45.9% vs. 61.6%, P ISTC (33.0% vs. 45.6%, P ISTC-recommended care (RR 0.79, 95%CI 0.72-0.86, P < 0.001). Strategies to ensure that women receive appropriate TB evaluation could provide a valuable opportunity for increasing case detection while also promoting equitable and universal access to care.

Development of a national center for hydrogen technology. A summary report of activities completed at the national center hydrogen technology from 2005 to 2010

Energy Technology Data Exchange (ETDEWEB)

Holmes, Michael J. [Univ. of North Dakota, Grand Forks, ND (United States)

2011-06-01

The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology® (NCHT®) since 2005 under a Cooperative Agreement with the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research of hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding of hydrogen-related projects ($20 million for the NCHT project which includes federal and corporate development partner funds) involving more than 85 partners (27 with the NCHT). The NCHT project's 19 activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan. A number of projects have been completed which range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified to transportation-grade quality in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in the first 5 years of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

International Nuclear Information System (INIS)

Herbst, A.K.; McCray, J.A.; Rogers, A.Z.; Simmons, R.F.; Palethrope, S.J.

1999-01-01

The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels

Manpower development and international cooperation in Nuclear Technology and Education Center, JAERI

International Nuclear Information System (INIS)

Shiba, Koreyuki; Tojo, Takao; Takada, Kazuo; Nomura, Masayuki

1996-01-01

Nuclear Technology and Education Center was founded in 1958 and now has two branches, Tokyo Education Center at Bunkyo-ku, Tokyo and Tokai Education Center at Tokai, Ibaraki-ken. The objective was to educate and train nuclear engineers and scientists for implementing the nation's program of atomic energy research, development and utilization. A variety of training courses have been prepared and carried out to meet the requirements of the nuclear community. In recent years, activities of getting the public acceptance have become important for nuclear energy deployment in Japan. Many short courses have been implemented at JAERI sites and cities for providing the public including high school teachers with basic knowledge on nuclear energy. International training programs of the center were started with the cooperation of the Japan International Cooperation Agency (JICA) in 1985 and of the International Atomic Energy Agency (IAEA) in 1987. International seminars were implemented for improving nuclear safety by inviting participants from the former Soviet Union, central/east European countries and the neighboring countries of Japan under the direction of the Science and Technology Agency (STA) in 1992. STA and JAERI are starting new programs of helping Asian and Pacific countries to develop nuclear manpower. (author)

A review of the design and development processes of simulation for training in healthcare - A technology-centered versus a human-centered perspective.

Science.gov (United States)

Persson, Johanna

2017-01-01

This article reviews literature about simulation systems for training in healthcare regarding the prevalence of human-centered approaches in the design and development of these systems, motivated by a tradition in this field of working technology-centered. The results show that the focus on human needs and context of use is limited. It is argued that a reduction of the focus on technical advancements in favor of the needs of the users and the healthcare community, underpinned by human factors and ergonomics theory, is favorable. Due to the low number of identified articles describing or discussing human-centered approaches it is furthermore concluded that the publication culture promotes technical descriptions and summative evaluations rather than descriptions and reflections regarding the design and development processes. Shifting the focus from a technology-centered approach to a human-centered one can aid in the process of creating simulation systems for training in healthcare that are: 1) relevant to the learning objectives, 2) adapted to the needs of users, context and task, and 3) not selected based on technical or fidelity criteria. Copyright © 2016 Elsevier Ltd. All rights reserved.

Center for Center for Technology for Advanced Scientific Component Software (TASCS)

Energy Technology Data Exchange (ETDEWEB)

Kostadin, Damevski [Virginia State Univ., Petersburg, VA (United States)

2015-01-25

A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS)1 tackles these these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

National Energy Research Scientific Computing Center (NERSC): Advancing the frontiers of computational science and technology

Energy Technology Data Exchange (ETDEWEB)

Hules, J. [ed.

1996-11-01

National Energy Research Scientific Computing Center (NERSC) provides researchers with high-performance computing tools to tackle science`s biggest and most challenging problems. Founded in 1974 by DOE/ER, the Controlled Thermonuclear Research Computer Center was the first unclassified supercomputer center and was the model for those that followed. Over the years the center`s name was changed to the National Magnetic Fusion Energy Computer Center and then to NERSC; it was relocated to LBNL. NERSC, one of the largest unclassified scientific computing resources in the world, is the principal provider of general-purpose computing services to DOE/ER programs: Magnetic Fusion Energy, High Energy and Nuclear Physics, Basic Energy Sciences, Health and Environmental Research, and the Office of Computational and Technology Research. NERSC users are a diverse community located throughout US and in several foreign countries. This brochure describes: the NERSC advantage, its computational resources and services, future technologies, scientific resources, and computational science of scale (interdisciplinary research over a decade or longer; examples: combustion in engines, waste management chemistry, global climate change modeling).

国際科学技術センター(ISTC)における日本原子力研究開発機構の活動

OpenAIRE

濱田 省三

2013-01-01

1994年に「国際科学技術センター(International Science and Technology Center: ISTC)」の本部がモスクワに設置された当初から、日本原子力研究開発機構(JAEA)(統合前の旧日本原子力研究所(JAERI)及び旧核燃料サイクル機構(JNC)を含む)はパートナープロジェクトへの参加をはじめ、いろいろな形態でISTCの活動に協力・貢献してきた。ところが、2010年12月にモスクワのISTC本部で開催された運営理事会の場で、運営理事会のメンバーの一つであるロシア連邦(ロシア)のパーティは、「ロシアは2015年12月末でISTCから脱退する」ことを表明した。この表明は同年8月にプレス発表されたメドベージェフ大統領によるISTC脱退に関する大統領令への署名の結果を受けたものである。この結果、ISTCの存続あるいはISTCに替わる新たな組織の新設について現在検討が進められているが、いずれにしろISTC本部は2015年末までしかモスクワにはいられない。したがって、今をISTCの節目と考え、この報告書はJAERI等がISTCの活動に対して行ってきた協...

Development of laser technology in Research Center of Laser Fusion

International Nuclear Information System (INIS)

Zheng Wanguo; Deng Ying; Zhou Wei

2013-01-01

This paper reviews the progress in the construction of SG-Ⅲ laser facility, integrated Testbed and XG-Ⅲ laser facility and that in the upgrade of the prototype of SG-Ⅲ, and the development in assembling and installing technology, and the achievements in maintaining cleanliness project and metrology in Laser Fusion Research Center, China Academy of Engineering Physics in China in 2012. (authors)

Technological drivers in data centers and telecom systems: Multiscale thermal, electrical, and energy management

International Nuclear Information System (INIS)

Garimella, Suresh V.; Persoons, Tim; Weibel, Justin; Yeh, Lian-Tuu

2013-01-01

Highlights: ► Thermal management approaches reviewed against energy usage of IT industry. ► Challenges of energy efficiency in large-scale electronic systems highlighted. ► Underlying drivers for progress at the business and technology levels identified. ► Thermal, electrical and energy management challenges discussed as drivers. ► Views of IT system operators, manufacturers and integrators represented. - Abstract: We identify technological drivers for tomorrow’s data centers and telecommunications systems, including thermal, electrical and energy management challenges, based on discussions at the 2nd Workshop on Thermal Management in Telecommunication Systems and Data Centers in Santa Clara, California, on April 25–26, 2012. The relevance of thermal management in electronic systems is reviewed against the background of the energy usage of the information technology (IT) industry, encompassing perspectives of different sectors of the industry. The underlying drivers for progress at the business and technology levels are identified. The technological challenges are reviewed in two main categories – immediate needs and future needs. Enabling cooling techniques that are currently under development are also discussed

Development of New Materials and Technologies for Welding and Surfacing at Research and Production Center 'Welding Processes and Technologies'

International Nuclear Information System (INIS)

Kozyrev, N A; Kryukov, R E; Galevsky, G V; Titov, D A; Shurupov, V M

2015-01-01

The paper provides description of research into the influence of new materials and technologies on quality parameters of welds and added metal carried out at research and production center «Welding processes and technologies».New welding technologies of tanks for northern conditions are considered, as well as technologies of submerged arc welding involving fluxing agents AN - 348, AN - 60, AN - 67, OK. 10.71 and carbon-fluorine containing additives, new flux cored wires and surfacing technologies, teaching programs and a trainer for welders are designed. (paper)

Texas Manufacturing Technology Center feasibility study for the Inland Regional Industrial Technology Institute

International Nuclear Information System (INIS)

1994-01-01

This document presents the Texas Manufacturing Technology Center (TMTC) Business Plan to convert the Central Facility of the Superconducting Super Collider project to alternate uses. The plan is divided into six sections: (1) Executive Summary, (2) Market and Benefit Analysis, (3) Marketing Strategy, (4) Services, (5) Organization and Operations Overview, and (6) Financial Plan. Each area is supported by separate documents that address individual opportunities and challenges associated with transitioning the facility, and its asset base to new uses for benefit of the locality, state, region and nation

Jackson State University (JSU)’s Center of Excellence in Science, Technology, Engineering, and Mathematics Education (CESTEME)

Science.gov (United States)

2016-01-08

Actuarial Science Taylor, Triniti Lanier Alcorn State University Animal Science Tchounwou, Hervey Madison Central Jackson State University Computer...for Public Release; Distribution Unlimited Final Report: Jackson State University (JSU)’s Center of Excellence in Science , Technology, Engineering...Final Report: Jackson State University (JSU)’s Center of Excellence in Science , Technology, Engineering, and Mathematics Education (CESTEME) Report

The World Wide Web and Technology Transfer at NASA Langley Research Center

Science.gov (United States)

Nelson, Michael L.; Bianco, David J.

1994-01-01

NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of the WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. During its first year on the Web, LaRC also developed several WWW-based information repositories. The Langley Technical Report Server (LTRS), a technical paper delivery system with integrated searching and retrieval, has proved to be quite popular. The NASA Technical Report Server (NTRS), an outgrowth of LTRS, provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software with the possible phase-out of NASA's COSMIC program. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people. With the completion of the LaRC reorganization, the Technology Applications Group, charged with interfacing with non-aerospace companies, opened for business with a popular home page.

Accelerator laboratories: development centers for experimental physics and technology in Mexico

International Nuclear Information System (INIS)

Mazari, M.

1989-01-01

Three years ago in this Nuclear Center the author and Professor Graef expounded the inception and development of experimental physics and new techniques centered about laboratories and equipped in our country with positive ion accelerators. Extracted here is the information on the laboratories that have allowed professional training as well as the furtherance of scientific productivity in each group. An additional proposal as to how the technical groups knowledgeable in advanced technology might contribute significantly to adequate preparation of youth at the intermediate level able to generate innocuous micro industries in their own neighbourhood. (Author). 5 refs, 2 figs, 2 tabs

Publications in academic medical centers: technology-facilitated culture clash.

Science.gov (United States)

Berner, Eta S

2014-05-01

Academic culture has a set of norms, expectations, and values that are sometimes tacit and sometimes very explicit. In medical school and other health professions educational settings, probably the most common norm includes placing a high value on peer-reviewed research publications, which are seen as the major evidence of scholarly productivity. Other features of academic culture include encouraging junior faculty and graduate students to share their research results at professional conferences and lecturing with slides as a major way to convey information. Major values that faculty share with journal editors include responsible conduct of research and proper attribution of others' words and ideas. Medical school faculty also value technology and are often quick to embrace technological advances that can assist them in their teaching and research. This article addresses the effects of technology on three aspects of academic culture: education, presentations at professional meetings, and research publications.The technologies discussed include online instruction, dissemination of conference proceedings on the Internet, plagiarism-detection software, and new technologies deployed by the National Center for Biotechnology Information, the home of PubMed. The author describes how the ease of deploying new technologies without faculty changing their norms and behavior in the areas of teaching and research can lead to conflicts of values among key stakeholders in the academic medical community, including faculty, journal editors, and professional associations. The implications of these conflicts and strategies for managing them are discussed.

Direct nn-Scattering Measurement With the Pulsed Reactor YAGUAR.

Science.gov (United States)

Mitchell, G E; Furman, W I; Lychagin, E V; Muzichka, A Yu; Nekhaev, G V; Strelkov, A V; Sharapov, E I; Shvetsov, V N; Chernuhin, Yu I; Levakov, B G; Litvin, V I; Lyzhin, A E; Magda, E P; Crawford, B E; Stephenson, S L; Howell, C R; Tornow, W

2005-01-01

Although crucial for resolving the issue of charge symmetry in the nuclear force, direct measurement of nn-scattering by colliding free neutrons has never been performed. At present the Russian pulsed reactor YAGUAR is the best neutron source for performing such a measurement. It has a through channel where the neutron moderator is installed. The neutrons are counted by a neutron detector located 12 m from the reactor. In preliminary experiments an instantaneous value of 1.1 × 10(18)/cm(2)s was obtained for the thermal neutron flux density. The experiment will be performed by the DIANNA Collaboration as International Science & Technology Center (ISTC) project No. 2286.

Atoms for Peace Exhibition Science Bringing Nations Together

CERN Multimedia

2000-01-01

CERN and JINR are providing safeguards on peaceful use of the potential of the Russian military and industrial complex by implementing scientific projects of the International Science and Technology Centre (ISTC).

Experimental investigations of the accelerator-driven transmutation technologies at the subcritical facility ''Yalina''

International Nuclear Information System (INIS)

Chigrinov, S.E.; Kiyavitskaya, H.I.; Serafimovich, I.G.; Rakhno, I.L.; Rutkovskaia, Ch.K.; Fokov, Y.; Khilmanovich, A.M.; Marstinkevich, B.A.; Bournos, V.V.; Korneev, S.V.; Mazanik, S.E.; Kulikovskaya, A.V.; Korbut, T.P.; Voropaj, N.K.; Zhouk, I.V.; Kievec, M.K.

2002-01-01

The investigations on accelerator-driven transmutation technologies (ADTT) focus on the reduction of the amount of long-lived wastes and the physics of a subcritical system driven with an external neutron source. This paper presents the experimental facility 'Yalina' which was designed and created at the Radiation Physics and Chemistry Problems Institute of the National Academy of Sciences of Belarus in the framework of the ISTC project no. B-070 to study the peculiarities of ADTT in thermal spectrum. A detailed description of the assembly, neutron generator and a preliminary analysis of some calculated and experimental data (multiplication factor, neutron flux density distribution in the assembly, transmutation rates of some long-lived fission products and minor actinides) are presented. (authors)

Technologies and experimental approaches in the NIH Botanical Research Centers

Science.gov (United States)

Barnes, Stephen; Birt, Diane F; Cassileth, Barrie R; Cefalu, William T; Chilton, Floyd H; Farnsworth, Norman R; Raskin, Ilya; van Breemen, Richard B; Weaver, Connie M

2009-01-01

There are many similarities between research on combinatorial chemistry and natural products and research on dietary supplements and botanicals in the NIH Botanical Research Centers. The technologies in the centers are similar to those used by other NIH-sponsored investigators. All centers rigorously examine the authenticity of botanical dietary supplements and determine the composition and concentrations of the phytochemicals therein, most often by liquid chromatography–mass spectrometry. Several of the centers specialize in fractionation and high-throughput evaluation to identify the individual bioactive agent or a combination of agents. Some centers are using DNA microarray analyses to determine the effects of botanicals on gene transcription with the goal of uncovering the important biochemical pathways they regulate. Other centers focus on bioavailability and uptake, distribution, metabolism, and excretion of the phytochemicals as for all xenobiotics. Because phytochemicals are often complex molecules, synthesis of isotopically labeled forms is carried out by plant cells in culture, followed by careful fractionation. These labeled phytochemicals allow the use of accelerator mass spectrometry to trace the tissue distribution of 14C-labeled proanthocyanidins in animal models of disease. State-of-the-art proteomics and mass spectrometry are also used to identify proteins in selected tissues whose expression and posttranslational modification are influenced by botanicals and dietary supplements. In summary, the skills needed to carry out botanical centers’ research are extensive and may exceed those practiced by most NIH investigators. PMID:18258642

The rehabilitation engineering research center for the advancement of cognitive technologies.

Science.gov (United States)

Heyn, Patricia Cristine; Cassidy, Joy Lucille; Bodine, Cathy

2015-02-01

Barring few exceptions, allied health professionals, engineers, manufacturers of assistive technologies (ATs), and consumer product manufacturers have developed few technologies for individuals with cognitive impairments (CIs). In 2004, the National Institute on Disability Rehabilitation Research (NIDRR) recognized the need to support research in this emergent field. They funded the first Rehabilitation Engineering Research Center for the Advancement of Cognitive Technologies (RERC-ACT). The RERC-ACT has since designed and evaluated existing and emerging technologies through rigorous research, improving upon existing AT devices, and creating new technologies for individuals with CIs. The RERC-ACT has contributed to the development and testing of AT products that assist persons with CIs to actively engage in tasks of daily living at home, school, work, and in the community. This article highlights the RERC-ACT's engineering development and research projects and discusses how current research may impact the quality of life for an aging population. © The Author(s) 2014.

What's new with nurseries and reforestation projects at the Missoula Technology and Development Center?

Science.gov (United States)

Bob Simonson

2011-01-01

The USDA Forest Service Missoula Technology and Development Center (MTDC) offers technical expertise, technology transfer, and new equipment development to federal, state, and private forest nurseries. Current and recently completed projects at MTDC include a front and mid-mount tractor evaluation, ATV-pulled mechanical tree planter, greenhouse snow remover, freeze...

Armstrong Flight Research Center Research Technology and Engineering Report 2015

Science.gov (United States)

Voracek, David F.

2016-01-01

I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

Using Technology, Clinical Workflow Redesign, and Team Solutions to Achieve the Patient Centered Medical Home

Science.gov (United States)

2011-01-01

Redesign, and Team Solutions to Achieve the Patient Centered Medical Home LTC Nicole Kerkenbush, MHA, MN Army Medical Department, Office of the...TITLE AND SUBTITLE Using Technology, Clinical Workflow Redesign, and Team Solutions to Achieve the Patient Centered Medical Home 5a. CONTRACT...Describe how these tools are being used to implement the Patient Centered Medical Home care model 2 2011 MHS Conference MEDCOM AHLTA Provider Satisfaction

Effect of an independent-sector treatment centre on provision of elective orthopaedic surgery in east and north Hertfordshire.

Science.gov (United States)

Vanhegan, I; Hakmi, A; de Roeck, N; Rumian, A

2015-10-01

Introduction Independent Sector Treatment Centres (ISTCs) were created to relieve pressure from Acute Hospital Trusts. In October 2011, an ISTC opened on the grounds of a hospital within the East and North Hertfordshire NHS Trust. Most elective orthopaedic procedures were transferred there. We investigated the effect on productivity of operating theatres working in the ISTC compared with those working in the Acute Hospital Trust (AHT). Methods A 3-month period of working at the AHT was compared with the same period 9-months later in the ISTC, which were termed 'pre-' and 'post-ISTC' opening, respectively. Data for upper limb (UL) as well as foot and ankle (F&A) surgery were collected. Differences in the number of lists and patients per list constituted usage analyses. Financial productivity was calculated from the latest Payment by Results (PbR) data. A two-tailed Mann-Whitney U-test at a confidence level of 95% was employed to compare costs between groups. Results The UL surgeon undertook 18 lists in both years with 66 patients (pre-ISTC) and 32 (post-ISTC), eliciting a reduction in productivity of 51.5%. There were 13 lists for F&A surgery pre-ISTC with 67 procedures, and 20 lists with 49 patients post-ISTC. Allowing for the difference in the number of lists, a reduction of 52.5% was noted. PbR analyses confirmed productivity of £169,695 (pre-ISTC) and £95,760 (post-ISTC) at a loss of £73,935 for the UL surgeon. F&A data revealed £97,801 (pre-ISTC) and £91,960 (post-ISTC) at a loss of £54,742 when correcting for the difference in the number of lists. There was a combined reduction in potential financial productivity of £128,677 over 3 months or £514,708 over 1 year. Discussion Implementation of the ISTC was detrimental to departmental efficiency, with <50% of the number of patients being treated and a marked reduction in financial productivity.

The Importance of Innovation: Diffusion Theory and Technological Progress in Writing Centers.

Science.gov (United States)

Inman, James A.

2000-01-01

Suggests that all stakeholders should share a focus on "innovations," referring here simultaneously to technologies and their social, cultural, political, and historical contexts. Introduces a new perspective through which writing center professionals can approach collaborative relationships with other stakeholders in the move towards…

The Savannah River Technology Center environmental monitoring field test platform

International Nuclear Information System (INIS)

Rossabi, J.

1993-01-01

Nearly all industrial facilities have been responsible for introducing synthetic chemicals into the environment. The Savannah River Site is no exception. Several areas at the site have been contaminated by chlorinated volatile organic chemicals. Because of the persistence and refractory nature of these contaminants, a complete clean up of the site will take many years. A major focus of the mission of the Environmental Sciences Section of the Savannah River Technology Center is to develop better, faster, and less expensive methods for characterizing, monitoring, and remediating the subsurface. These new methods can then be applied directly at the Savannah River Site and at other contaminated areas in the United States and throughout the world. The Environmental Sciences Section has hosted field testing of many different monitoring technologies over the past two years primarily as a result of the Integrated Demonstration Program sponsored by the Department of Energy's Office of Technology Development. This paper provides an overview of some of the technologies that have been demonstrated at the site and briefly discusses the applicability of these techniques

Combined Neutron Center for European Research and Technology

International Nuclear Information System (INIS)

Lagniel, Jean-Michel

2002-01-01

High-power proton linacs are needed as driver for several applications, namely transmutation of nuclear waste using Accelerator Driven Systems (ADS), spallation neutron sources (ESS in Europe) and other fields of basic and applied research (next generation of radioactive ion beam facilities, neutrino factories, muon colliders, irradiation facilities for material testing...). The possible synergies among these projects will be pointed out and the feasibility study of high-power proton linac used as driver of a multi-user facility (CONCERT) will be presented. There was excellent scientific, technical and economic reasons to study a Combined Neutron Center for European Research and Technology (CONCERT) based on a high-power proton accelerator. Such an installation would serve condensed matter studies by spallation neutron scattering, a technological irradiation tool and R and D facility for an hybrid reactor demonstrator, a radioactive ion beam facility for nuclear physics, R and D developments for a muon/neutrino facility. The installation could therefore constitute a European center of excellence in the field of neutronics where a large number of scientific and technical executives could be trained. The CONCERT Project Team has performed the feasibility study of such a multi-user facility with: - a review of the beam needs for the different applications, - an analyze of their compatibility, - the definition of the scope of a site-independent project, - a selection of the most appropriate options regarding scientific, technical, financial, organizational and administrative aspects, - an estimation of the costs for construction, operation and the needs in manpower. The conceptual design report [17] is sufficiently detailed to minimize contingencies on those parts of the project having a large potential impact in terms of performances, costs or delays. (author)

Career and Technology Center Guides Students in Real-Life Careers | Poster

Science.gov (United States)

By Carolynne Keenan, Contributing Writer Frederick County Public School students have a unique opportunity—a chance to get a real-world, hands-on experience in biomedical science and biotechnology before they even graduate from high school, thanks to the Frederick County Career and Technology Center (CTC). Several years ago, the CTC established its biomedical sciences program

Calcined Waste Storage at the Idaho Nuclear Technology and Engineering Center

Energy Technology Data Exchange (ETDEWEB)

M. D. Staiger

2007-06-01

This report provides a quantitative inventory and composition (chemical and radioactivity) of calcined waste stored at the Idaho Nuclear Technology and Engineering Center. From December 1963 through May 2000, liquid radioactive wastes generated by spent nuclear fuel reprocessing were converted into a solid, granular form called calcine. This report also contains a description of the calcine storage bins.

Current status of the PIK Reactor

International Nuclear Information System (INIS)

Konoplev, K.A.

1999-01-01

At the end of 1998 the heads of the Russian Academy of Science, the Ministry of Science and Technology and the Ministry of Atomic Energy (the bodies involved in the research work with neutrons) declared the PIK-project as one of the objects of the first priority. They set a task to put it into operation in the next 3-4 years and to organize on its base an international center of neutron research. Realization of this task will depend on the real financing. In the last months there was a remarkable impulse in the construction work. In the frame of ISTC Project 321-96 Petersburg Nuclear Physics Institute and Research Institute of Technology developed functional training simulator (FTSC) for Reactor PIK. The utilization of FTSC for reactor PIK design examination began. (author)

7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts

International Nuclear Information System (INIS)

2012-01-01

This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques

Distance Learning With NASA Lewis Research Center's Learning Technologies Project

Science.gov (United States)

Petersen, Ruth

1998-01-01

The NASA Lewis Research Center's Learning Technologies Project (LTP) has responded to requests from local school district technology coordinators to provide content for videoconferencing workshops. Over the past year we have offered three teacher professional development workshops that showcase NASA Lewis-developed educational products and NASA educational Internet sites. In order to determine the direction of our involvement with distance learning, the LTP staff conducted a survey of 500 U.S. schools. We received responses from 72 schools that either currently use distance learning or will be using distance learning in 98-99 school year. The results of the survey are summarized in the article. In addition, the article provides information on distance learners, distance learning technologies, and the NASA Lewis LTP videoconferencing workshops. The LTP staff will continue to offer teacher development workshops through videoconferencing during the 98-99 school year. We hope to add workshops on new educational products as they are developed at NASA Lewis.

Assessing the quality of tuberculosis evaluation for children with prolonged cough presenting to routine community health care settings in rural Uganda.

Science.gov (United States)

Marquez, Carina; Davis, J Lucian; Katamba, Achilles; Haguma, Priscilla; Ochom, Emmanuel; Ayakaka, Irene; Chamie, Gabriel; Dorsey, Grant; Kamya, Moses R; Charlebois, Edwin; Havlir, Diane V; Cattamanchi, Adithya

2014-01-01

Improving childhood tuberculosis (TB) evaluation and care is a global priority, but data on performance at community health centers in TB endemic regions are sparse. To describe the current practices and quality of TB evaluation for children with cough ≥2 weeks' duration presenting to community health centers in Uganda. Cross-sectional analysis of children (ISTC). From 2009-2012, 1713 of 187,601 (0.9%, 95% CI: 0.4-1.4%) children presenting to community health centers had cough ≥ 2 weeks' duration. Of those children, only 299 (17.5%, 95% CI: 15.7-19.3%) were referred for sputum microscopy, but 251 (84%, 95% CI: 79.8-88.1%) completed sputum examination if referred. The yield of sputum microscopy was only 3.6% (95% CI: 1.3-5.9%), and only 55.6% (95% CI: 21.2-86.3%) of children with acid-fast bacilli positive sputum were started on treatment. Children under age 5 were less likely to be referred for sputum examination and to receive care in accordance with ISTC. The proportion of children evaluated in accordance with ISTC increased over time (4.6% in 2009 to 27.9% in 2012, p = 0.03), though this did not result in increased case-detection. The quality of TB evaluation was poor for children with cough ≥2 weeks' duration presenting for health care. Referrals for sputum smear microscopy and linkage to TB treatment were key gaps in the TB evaluation process, especially for children under the age of five.

Information technology leadership in academic medical centers: a tale of four cultures.

Science.gov (United States)

Friedman, C P

1999-07-01

Persons and groups within academic medical centers bring consistent and predictable viewpoints to planning and decision making. The varied professional and academic cultures of these individuals appear to account primarily for the diversity of their viewpoints. Understanding these professional cultures can help leaders achieve some predictability in the complex environments for which they are responsible. Leaders in information technology in particular, in order to be successful, must become part-time anthropologists, immersing themselves in the varied workplaces of their constituents to understand the work they do and the cultures that have grown up around this work. Only in this way will they be able to manage the challenges that arise continuously as the technology and the needs it can address change over time. In this article, the author briefly describes the concept of culture, portrays four specific professional cultures that typically coexist in academic medical centers, and argues that understanding these cultures is absolutely critical to effective management and use of information resources.

Allocation of Tutors and Study Centers in Distance Learning Using Geospatial Technologies

Directory of Open Access Journals (Sweden)

Shahid Nawaz Khan

2018-05-01

Full Text Available Allama Iqbal Open University (AIOU is Pakistan’s largest distance learning institute, providing education to 1.4 million students. This is a fairly large setup across a country where students are highly geographically distributed. Currently, the system works using a manual approach, which is not efficient. Allocation of tutors and study centers to students plays a key role in creating a better learning environment for distance learning. Assigning tutors and study centers to distance learning students is a challenging task when there is a huge geographic spread. Using geospatial technologies in open and distance learning can fix allocation problems. This research analyzes real data from the twin cities Islamabad and Rawalpindi. The results show that geospatial technologies can be used for efficient and proper resource utilization and allocation, which in turn can save time and money. The overall idea fits into an improved distance learning framework and related analytics.

Available decontamination and decommissioning capabilities at the Savannah River Technology Center

International Nuclear Information System (INIS)

Polizzi, L.M.; Norkus, J.K.; Paik, I.K.; Wooten, L.A.

1992-01-01

The Safety Analysis and Engineering Services Group has performed a survey of the Savannah River Technology Center (SRTC) technical capabilities, skills, and experience in Decontamination and Decommissioning (D ampersand D) activities. The goal of this survey is to enhance the integration of the SRTC capabilities with the technical needs of the Environmental Restoration Department D ampersand D program and the DOE Office of Technology Development through the Integrated Demonstration Program. This survey has identified technical capabilities, skills, and experience in the following D ampersand D areas: Characterization, Decontamination, Dismantlement, Material Disposal, Remote Systems, and support on Safety Technology for D ampersand D. This review demonstrates the depth and wealth of technical capability resident in the SRTC in relation to these activities, and the unique qualifications of the SRTC to supply technical support in the area of DOE facility D ampersand D. Additional details on specific technologies and applications to D ampersand D will be made available on request

Solid and liquid radioactive waste management of the Nuclear Technology Development Center (CDTN) - NUCLEBRAS

International Nuclear Information System (INIS)

Guzella, M.F.R.; Miaw, S.T.W.; Mourao, R.P.; Prado, M.A.S. do; Reis, L.C.A.; Santos, P.O.; Silva, E.M.P.

1986-01-01

Low level liquid and solid wastes are produced in several laboratories of the NUCLEAR TECHNOLOGY DEVELOPMENT CENTER (CDTN)-NUCLEBRAS. In the last years, the intensification of technical activities at the Center has increased the radioactive waste volumes. Therefore, the implementation of a Radioactive Waste Management Program has begun. This Program includes the systematic of activities from the waste collection to the transportation for the final disposal. The liquid and solid waste are collected separately in proper containers and stored for later treatment according to the processes available or under development at the Center. (Author) [pt

Solid and liquid radioactive waste management of the Nuclear Technology Development Center (CDTN)- Nuclebras

International Nuclear Information System (INIS)

Guzella, M.F.R.; Mourao, R.P.; Reis, L.C.A.; Silva, E.M.P.; Miaw, S.T.W.; Prado, M.A.S.; Santos, P.O.

1986-01-01

Low level liquid and solid wastes are produced in several laboratories of the NUCLEAR TECHNOLOGY DEVELOPMENT CENTER (CDTN) - NUCLEBRAS. In the last years, the intensification of technical activities at the Center has increased the radioactive waste volumes. Therefore, the implementation of a Radioactive Waste Management Program has begun. This Program includes the systematic of activities from the waste collection to the transportation for the final disposal. The liquid and solid waste are collected separately in proper containers and stored for later treatment according to the processes available or under development at the Center. (Author) [pt

A proposal for improving data center management through strategic implementation of Server virtualization technology to support Malaysian Nuclear Agency's activities

International Nuclear Information System (INIS)

Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Raja Murzaferi Raja Moktar; Saaidi Ismail

2010-01-01

Management of servers in Nuclear Malaysia's data center poses a big challenge to IT Center as well as to the general management. Traditional server management techniques have been used to provide reliable and continuous support for the ever increasing services and applications demanded by researchers and the other staffs of Nuclear Malaysia. Data centers are cost centers which need logistical support such as electricity, air conditioning, room space, manpower and other resources. To save cost and comply with Green Technology while maintaining or improving the level of services, a new concept called server virtualization is proposed and a feasibility study of this technology has been initiated to explore its potential to accommodate IT centers ever demanding services while reducing the need for such logistical supports, hence adhering to the Green IT concept. Server virtualization is a new technology where a single high performance physical server can host multiple high processing services, and different types operating systems with different hardware and software requirements which are traditionally performed by multiple server machines. This paper briefly explains server virtualization concepts, tools and techniques and proposes an implementation strategy of the technology for Nuclear Malaysia's data center. (author)

National Wind Technology Center sitewide, Golden, CO: Environmental assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

National Wind Technology Center sitewide, Golden, CO: Environmental assessment

International Nuclear Information System (INIS)

1996-11-01

The National Renewable Energy Laboratory (NREL), the nation's primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate

Test facilities for radioactive materials transport packages (Transportation Technology Center Inc., Pueblo, Colorado, USA)

International Nuclear Information System (INIS)

Conlon, P.C.L.

2001-01-01

Transportation Technology Center, Inc. is capable of conducting tests on rail vehicle systems designed for transporting radioactive materials including low level waste debris, transuranic waste, and spent nuclear fuel and high level waste. Services include rail vehicle dynamics modelling, on-track performance testing, full scale structural fatigue testing, rail vehicle impact tests, engineering design and technology consulting, and emergency response training. (author)

A regional technology transfer program. [North Carolina Industrial Applications Center for the Southeast

Science.gov (United States)

1979-01-01

The proliferation of online searching capabilities among its industrial clients, changes in marketing staff and direction, use of Dun and Bradstreet marketing service files, growth of the Annual Service Package program, and services delivered to clients at the NASA funded North Carolina Science and Technology Research Center are described. The library search service was reactivated and enlarged, and a survey was conducted on the NC/STRC Technical Bulletin's effectiveness. Several quotations from clients assess the overall value of the Center's services.

Fleet Readiness Center - Southeast Technology Development Program (Cadmium & Hexavalent Chromium Reduction)

Science.gov (United States)

2014-11-01

Fleet Readiness Center - Southeast TECHNOLOGY DEVELOPMENT PROGRAM (Cadmium & Hexavalent Chromium Reduction) Jack Benfer Senior Materials...Development Program (Cadmium & Hexavalent Chromium Reduction) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...Rinse Black Oxide Rinse CRES Passivation Chrome Plating Cadmium Plating Cadmium Brush Plating Class N (TRL 9) Class N (TRL 7) Class N (TRL 6

The project of Esfahan Nuclear Technology Center (ENTEC) and the transfer of nuclear tecnology in Iran

International Nuclear Information System (INIS)

Khazaneh, Reza

1977-01-01

In 1974, the Atomic Energy Organization of Iran (AEOI) decided to set up a Nuclear Technology Center on Esfahan (ENTEC) in collaboration with France's Technicatome Company and the CEA. This center is scheduled to go into operation during 1976-1980. The purposes for setting up ENTEC are threefold: a. to give scientific and technical support to the operation of nuclear power plants and nuclear industries in Iran. b. to carry out research and development in the area of nuclear technology on an industrial level. c. to give supplementary education and training to the manpower needs for the AEOI. To carry out the program of technology transfer, temporary laboratories have been set up in Tehran for engineers, technicians and training programs have been organized primarily in France. The ENTEC project will also include a school for education of junior scientists and engineers in the field of nuclear technology

[Technology: training centers--a new method for learning surgery in visceral surgery].

Science.gov (United States)

Troidl, H

1996-01-01

The importance of training centers can be best described after first answering a few questions like: 1. What kind of surgery will we deal with in the future? 2. What kind of surgeon do we need for this surgery, if it is basically different? 3. How will this surgeon have to be educated/trained for this different surgery? Although I am aware of the fact, that statements about future prospects are usually doomed to fail, I maintain that endoscopic surgery will be an essential part of general surgery. If this is so, surgery will be dominated by extremely complicated technology, new techniques and new instruments. It will be a "different" surgery. It will offer more comfort at the same safety. The surgeon of the future will still need a certain personality; he will still need intuition and creativity. To survive in our society, he will have to be an organiser and even a businessman. Additionally, something new has to be added: he will have to understand modern, complicated technology and will have to use totally different instruments for curing surgical illness. This makes it clear that we will need a different education/training and may be even a different selection of surgeons. We should learn from other professions sharing common interests with surgery, for example, sports where the common interest is achieving most complicated motions and necessarily highly differentiated coordination. Common interest with airline pilots is the target of achieving absolute security. They have a highly differentiated selection and training concept. Training centers may be-under certain prerequisites-a true alternative for this necessary form of training. They must have a concept, i.e. contents and aims have to be defined, structured and oriented on the requirements of surgery for the patient. Responsibility for the concept, performance and control can only be in the hands of Surgical Societies and Universities. These prerequisites correspond most likely to training centers being

Assessing the quality of tuberculosis evaluation for children with prolonged cough presenting to routine community health care settings in rural Uganda.

Directory of Open Access Journals (Sweden)

Carina Marquez

Full Text Available Improving childhood tuberculosis (TB evaluation and care is a global priority, but data on performance at community health centers in TB endemic regions are sparse.To describe the current practices and quality of TB evaluation for children with cough ≥2 weeks' duration presenting to community health centers in Uganda.Cross-sectional analysis of children (<15 years receiving care at five Level IV community health centers in rural Uganda for any reason between 2009-2012. Quality of TB care was assessed using indicators derived from the International Standards of Tuberculosis Care (ISTC.From 2009-2012, 1713 of 187,601 (0.9%, 95% CI: 0.4-1.4% children presenting to community health centers had cough ≥ 2 weeks' duration. Of those children, only 299 (17.5%, 95% CI: 15.7-19.3% were referred for sputum microscopy, but 251 (84%, 95% CI: 79.8-88.1% completed sputum examination if referred. The yield of sputum microscopy was only 3.6% (95% CI: 1.3-5.9%, and only 55.6% (95% CI: 21.2-86.3% of children with acid-fast bacilli positive sputum were started on treatment. Children under age 5 were less likely to be referred for sputum examination and to receive care in accordance with ISTC. The proportion of children evaluated in accordance with ISTC increased over time (4.6% in 2009 to 27.9% in 2012, p = 0.03, though this did not result in increased case-detection.The quality of TB evaluation was poor for children with cough ≥2 weeks' duration presenting for health care. Referrals for sputum smear microscopy and linkage to TB treatment were key gaps in the TB evaluation process, especially for children under the age of five.

The Research Results of Radioactive Waste Management Technology Center Year 1997/1998

International Nuclear Information System (INIS)

1998-12-01

The research results of Radioactive Waste Management Technology Center, National Atomic Energy Agency of Indonesia year 1997/1998 contain paper as form of research results on radioactive waste management related fields. There were included many aspects such as radioactive waste processing, storage, decontamination, decommissioning, safety and environmental aspects. There are 26 papers indexed individually (ID)

Creation and Plan of an Underground Geologic Radioactive Waste Isolation Facility at the Nizhnekansky Rock Massif in Russia

International Nuclear Information System (INIS)

Gupalo, T A; Kudinov, K G; Jardine, L J; Williams, J

2004-01-01

This joint geologic repository project in Russia was initiated in May 2002 between the United States (U.S.) International Science and Technology Center (ISTC) and the Federal State Unitary Enterprise ''All-Russian Research and Design Institute of Production Engineering'' (VNIPIPT). The project (ISTC Partner Project 2377) is funded by the U.S. Department of Energy Office of Civilian Radioactive Waste Management (DOE-RW) for a period of 2-1/2 years. ISTC project activities were integrated into other ongoing geologic repository site characterization activities near the Mining and Chemical Combine (MCC K-26) site. This allowed the more rapid development of a plan for an underground research laboratory, including underground design and layouts. It will not be possible to make a final choice between the extensively studied Verkhne-Itatski site or the Yeniseiski site for construction of the underground laboratory during the project time frame because additional data are needed. Several new sources of data will become available in the next few years to help select a final site. Studies will be conducted at the 1-km deep borehole at the Yeniseisky site where drilling started in 2004. And in 2007, after the scheduled shutdown of the last operating reactor at the MCC K-26 site, data will be collected from the rock massif as the gneiss rock cools, and the cool-down responses modeled. After the underground laboratory is constructed, the data collected and analyzed, this will provide the definitive evidence regarding the safety of the proposed geologic isolation facilities for radioactive wastes (RW). This data will be especially valuable because they will be collected at the same site where the wastes will be subsequently placed, rather than on hypothetical input data only. Including the operating costs for 10 to 15 years after construction, the cost estimate for the laboratory is $50M. With additional funding from non-ISTC sources, it will be possible to complete this

Systems analysis support to the waste management technology center

International Nuclear Information System (INIS)

Rivera, A.L.; Osborne-Lee, I.W.; DePaoli, S.M.

1988-01-01

This paper describes a systems analysis concept being developed in support of waste management planning and analysis activities for Martin Marietta Energy Systems, Inc. (Energy Systems), sites. This integrated systems model serves as a focus for the accumulation and documentation of technical and economic information from current waste management practices, improved operations projects, remedial actions, and new system development activities. The approach is generic and could be applied to a larger group of sites. This integrated model is a source of technical support to waste management groups in the Energy Systems complex for integrated waste management planning and related technology assessment activities. This problem-solving methodology for low-level waste (LLW) management is being developed through the Waste Management Technology Center (WMTC) for the Low-Level Waste Disposal, Development, and Demonstration (LLWDDD) Program. In support of long-range planning activities, this capability will include the development of management support tools such as specialized systems models, data bases, and information systems. These management support tools will provide continuing support in the identification and definition of technical and economic uncertainties to be addressed by technology demonstration programs. Technical planning activities and current efforts in the development of this system analysis capability for the LLWDDD Program are presented in this paper

Semi-annual report of Nuclear Technology and Development Center (CDTN) - July to December 1988

International Nuclear Information System (INIS)

1989-01-01

The main activities developed by the several divisions of Nuclear Technology Development Center (CDTN) are described, including areas of reactor tecnologies, fuel cycle, materials and component, nuclear safety and tecnical substructure. (C.G.C.) [pt

Examining Health Information Technology Implementations: Case of the Patient-Centered Medical Home

Science.gov (United States)

Behkami, Nima A.

2012-01-01

It has been shown that the use of Health Information Technology (HIT) is associated with reduced cost and increased quality of care. This dissertation examined the use of registries in Patient Centered Medical Home (PCMH) practices. A survey questionnaire was sent to a nationwide group of clinics certified for being a PCMH. They were asked to…

Solid State Technology Branch of NASA Lewis Research Center: Fifth Annual Digest

International Nuclear Information System (INIS)

1993-08-01

The digest is a collection of papers written by the members of the Solid State Technology Branch of NASA Lewis Research Center from June 1992-June 1993. The papers cover a range of topics relating to superconductivity, monolithic microwave integrated circuits (MMIC's), coplanar waveguide, and material characterization. Individual papers are abstracted separately on the data base

The Research Results of Radioactive Waste Management Technology Center Year 1996/1997

International Nuclear Information System (INIS)

Budiman, P.; Martono, H.; Las, T.; Lubis, E.; Mulyanto; Wisnubroto, D. S.; Sucipta

1997-12-01

The research results of Radioactive Waste Management Technology Center, National Atomic Energy Agency of Indonesia year 1996/1997 contain paper as form of research results on radioactive waste management related fields. There were included many aspects such as radioactive waste processing, storage, decontamination, decommissioning, safety and environmental aspects. There are 24 papers and 12 short communications indexed individually(ID)

The National Space Science and Technology Center's Education and Public Outreach Program

Science.gov (United States)

Cox, G. N.; Denson, R. L.

2004-12-01

The objective of the National Space Science and Technology Center's (NSSTC) Education and Public Outreach program (EPO) is to support K-20 education by coalescing academic, government, and business constituents awareness, implementing best business/education practices, and providing stewardship over funds and programs that promote a symbiotic relationship among these entities, specifically in the area of K-20 Science, Technology, Engineering, and Mathematics (STEM) education. NSSTC EPO Program's long-term objective is to showcase its effective community-based integrated stakeholder model in support of STEM education and to expand its influence across the Southeast region for scaling ultimately across the United States. The Education and Public Outreach program (EPO) is coordinated by a supporting arm of the NSSTC Administrative Council called the EPO Council (EPOC). The EPOC is funded through federal, state, and private grants, donations, and in-kind contributions. It is comprised of representatives of NSSTC Research Centers, both educators and scientists from the Alabama Space Science and Technology Alliance (SSTA) member institutions, the Alabama Space Grant Consortium and the NASA Marshall Space Flight Center's (MSFC) Education Office. Through its affiliation with MSFC and the SSTA - a consortium of Alabama's research universities that comprise the NSSTC, EPO fosters the education and development of the next generation of Alabama scientists and engineers by coordinating activities at the K-20 level in cooperation with the Alabama Department of Education, the Alabama Commission on Higher Education, and Alabama's businesses and industries. The EPO program's primary objective is to be Alabama's premiere organization in uniting academia, government, and private industry by way of providing its support to the State and Federal Departments of Education involved in systemic STEM education reform, workforce development, and innovative uses of technology. The NSSTC EPO

Technology requirements to be addressed by the NASA Lewis Research Center Cryogenic Fluid Management Facility program

Science.gov (United States)

Aydelott, J. C.; Rudland, R. S.

1985-01-01

The NASA Lewis Research Center is responsible for the planning and execution of a scientific program which will provide advance in space cryogenic fluid management technology. A number of future space missions were identified that require or could benefit from this technology. These fluid management technology needs were prioritized and a shuttle attached reuseable test bed, the cryogenic fluid management facility (CFMF), is being designed to provide the experimental data necessary for the technology development effort.

Assisted Reproductive Technology in Iran: The First National Report on Centers, 2011

Directory of Open Access Journals (Sweden)

Mehrandokht Abedini

2016-09-01

Full Text Available Background: Due to the worldwide increase in infertility, it is both necessary and important to have assisted reproductive technology (ART registries. In Iran, donation and surrogacy programs are approved by decrees from religious scholars. ART has been used since 1984 in Iran and the first Iranian infant conceived by gamete intra-fallopian transfer (GIFT was born in 1989. This report, however, is the first national report on Iranian ART centers. Materials and Methods: This cross-sectional study, conducted under the supervision of the Iranian Ministry of Health, presented a summary of the numbers and percentages of centers that provided infertility services in Iran, as well as the status of ART in Iran during 2011. Results: A total of 52 centers reported treatment cycles and performed approximately 29000 intrauterine insemination (IUI, in addition to 35000 in vitro fertilization (IVF and intra-cytoplasmic sperm injection (ICSI cycles. Conclusion: Iran has considerable potential to provide IVF services for both Iranians as well as other nationalities throughout the region. This proves the need for a national center that will implement a registry system.

PTC test bed upgrades to provide ACSES testing support capabilities at transportation technology center.

Science.gov (United States)

2015-06-01

FRA Task Order 314 upgraded the Positive Train Control (PTC) Test Bed at the Transportation Technology Center to support : testing of PTC systems, components, and related equipment associated with the Advanced Civil Speed Enforcement System : (ACSES)...

Oklahoma State University proposed Advanced Technology Research Center. Environmental Assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

The Department of Energy (DOE) has prepared an Environmental Assessment (EA) evaluating the construction and equipping of the proposed Advanced Technology Research Center (ATRC) at Oklahoma State University (OSU) in Stillwater, Oklahoma. Based on the analysis in the EA, the DOE has determined that the proposed action does not constitute a major federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement is not required.

Robotic Technology Efforts at the NASA/Johnson Space Center

Science.gov (United States)

Diftler, Ron

2017-01-01

The NASA/Johnson Space Center has been developing robotic systems in support of space exploration for more than two decades. The goal of the Center’s Robotic Systems Technology Branch is to design and build hardware and software to assist astronauts in performing their mission. These systems include: rovers, humanoid robots, inspection devices and wearable robotics. Inspection systems provide external views of space vehicles to search for surface damage and also maneuver inside restricted areas to verify proper connections. New concepts in human and robotic rovers offer solutions for navigating difficult terrain expected in future planetary missions. An important objective for humanoid robots is to relieve the crew of “dull, dirty or dangerous” tasks allowing them more time to perform their important science and exploration missions. Wearable robotics one of the Center’s newest development areas can provide crew with low mass exercise capability and also augment an astronaut’s strength while wearing a space suit.This presentation will describe the robotic technology and prototypes developed at the Johnson Space Center that are the basis for future flight systems. An overview of inspection robots will show their operation on the ground and in-orbit. Rovers with independent wheel modules, crab steering, and active suspension are able to climb over large obstacles, and nimbly maneuver around others. Humanoid robots, including the First Humanoid Robot in Space: Robonaut 2, demonstrate capabilities that will lead to robotic caretakers for human habitats in space, and on Mars. The Center’s Wearable Robotics Lab supports work in assistive and sensing devices, including exoskeletons, force measuring shoes, and grasp assist gloves.

Simulated Aging of Spacecraft External Materials on Orbit

Science.gov (United States)

Khatipov, S.

Moscow State Engineering Physics Institute (MIFI), in cooperation with Air Force Research Laboratory's Satellite Assessment Center (SatAC), the European Office of Aerospace Research and Development (EOARD), and the International Science and Technology Center (ISTC), has developed a database describing the changes in optical properties of materials used on the external surfaces of spacecraft due to space environmental factors. The database includes data acquired from tests completed under contract with the ISTC and EOARD, as well as from previous Russian materials studies conducted within the last 30 years. The space environmental factors studied are for those found in Low Earth Orbits (LEO) and Geosynchronous orbits (GEO), including electron irradiation at 50, 100, and 200 keV, proton irradiation at 50, 150, 300, and 500 keV, and ultraviolet irradiation equivalent to 1 sun-year. The material characteristics investigated were solar absorption (aS), spectral reflectance (rl), solar reflectance (rS), emissivity (e), spectral transmission coefficient (Tl), solar transmittance (TS), optical density (D), relative optical density (D/x), Bi-directional Reflectance Distribution Function (BRDF), and change of appearance and color in the visible wavelengths. The materials tested in the project were thermal control coatings (paints), multilayer insulation (films), and solar cells. The ability to predict changes in optical properties of spacecraft materials is important to increase the fidelity of space observation tools, better understand observation of space objects, and increase the longevity of spacecraft. The end goal of our project is to build semi-empirical mathematical models to predict the long-term effects of space aging as a function of time and orbit.

Technologies in the patient-centered medical home: examining the model from an enterprise perspective.

Science.gov (United States)

Hughes, Cortney L; Marshall, Capt Robert; Murphy, Edward; Mun, Seong K

2011-01-01

Fee-for-service reimbursement has fragmented the healthcare system. Providers are paid based on the number of services rendered instead of quality, leading to the cost of care rising at a faster rate than its value. One approach to counter this is the Patient-Centered Medical Home (PCMH), a primary care model that emphasizes team-based medicine, a partnership between patients and providers, and expanded access and communication. The transition to PCMH is facilitated by innovative technologies, such as telemedicine for additional services, electronic medical records to document patients' health needs, and online portals for electronic visits and communication between patients and providers. Implementing these technologies involves tremendous investment of funds and time from practices and healthcare organizations. Although PCMH does not require such technologies, they facilitate its success, as care coordination and population management necessitated by the model are difficult to do without. This article argues that there is a paradox in PCMH and technology is at its center. Although PCMH intends to be cost effective by reducing hospital admissions and ER visits through providing better preventative services, it is actually a financial risk due to the very real upfront costs of implementing and sustaining technologies needed to carry out the intent of the PCMH model, which may not be made up immediately, if ever. This article delves into the rationale behind why payers, providers, and patients have adopted PCMH regardless of this risk and in doing so, maps out the roles that innovative technologies play in the conversion to PCMH.

Armstrong Flight Research Center Research Technology and Engineering 2017

Science.gov (United States)

Voracek, David F. (Editor)

2018-01-01

I am delighted to present this report of accomplishments at NASA's Armstrong Flight Research Center. Our dedicated innovators possess a wealth of performance, safety, and technical capabilities spanning a wide variety of research areas involving aircraft, electronic sensors, instrumentation, environmental and earth science, celestial observations, and much more. They not only perform tasks necessary to safely and successfully accomplish Armstrong's flight research and test missions but also support NASA missions across the entire Agency. Armstrong's project teams have successfully accomplished many of the nation's most complex flight research projects by crafting creative solutions that advance emerging technologies from concept development and experimental formulation to final testing. We are developing and refining technologies for ultra-efficient aircraft, electric propulsion vehicles, a low boom flight demonstrator, air launch systems, and experimental x-planes, to name a few. Additionally, with our unique location and airborne research laboratories, we are testing and validating new research concepts. Summaries of each project highlighting key results and benefits of the effort are provided in the following pages. Technology areas for the projects include electric propulsion, vehicle efficiency, supersonics, space and hypersonics, autonomous systems, flight and ground experimental test technologies, and much more. Additional technical information is available in the appendix, as well as contact information for the Principal Investigator of each project. I am proud of the work we do here at Armstrong and am pleased to share these details with you. We welcome opportunities for partnership and collaboration, so please contact us to learn more about these cutting-edge innovations and how they might align with your needs.

Nonlinear Structuring and High-energy Electrons: Role in Ionosphere and in Thunderstorm Atmosphere Processes

Science.gov (United States)

2010-05-01

Processes Aleksander Viktorovich Gurevich P. N. Lebedev Physical Institute Leninsky pr.,53 Moscow, Russia 117924 EOARD ISTC 06...Electrons: Role in Ionosphere and in Thunderstorm Atmosphere Processes 5a. CONTRACT NUMBER ISTC Registration No: 3641p 5b. GRANT NUMBER... ISTC

Establishing and evaluating bar-code technology in blood sampling system: a model based on human centered human-centered design method.

Science.gov (United States)

Chou, Shin-Shang; Yan, Hsiu-Fang; Huang, Hsiu-Ya; Tseng, Kuan-Jui; Kuo, Shu-Chen

2012-01-01

This study intended to use a human-centered design study method to develop a bar-code technology in blood sampling process. By using the multilevel analysis to gather the information, the bar-code technology has been constructed to identify the patient's identification, simplify the work process, and prevent medical error rates. A Technology Acceptance Model questionnaire was developed to assess the effectiveness of system and the data of patient's identification and sample errors were collected daily. The average scores of 8 items users' perceived ease of use was 25.21(3.72), 9 items users' perceived usefulness was 28.53(5.00), and 14 items task-technology fit was 52.24(7.09), the rate of patient identification error and samples with order cancelled were down to zero, however, new errors were generated after the new system deployed; which were the position of barcode stickers on the sample tubes. Overall, more than half of nurses (62.5%) were willing to use the new system.

76 FR 59166 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

Science.gov (United States)

2011-09-23

... Development and Technology Center, a Subsidiary of Navistar International Corporation Truck Division, Fort... International Corporation, Truck Division, Fort Wayne, Indiana (subject firm). The negative determination was... is a headcount reduction across the nation, made possible by the Global Outsourcing. * * * '' The...

Search Technologies | NCI Technology Transfer Center | TTC

Science.gov (United States)

Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

Available Technologies | NCI Technology Transfer Center | TTC

Science.gov (United States)

Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-01-31

FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-04-30

The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

Education, Technology, and Media: A Peak into My Summer Internship at NASA Glenn Research Center in Cleveland, Ohio

Science.gov (United States)

Moon, James

2004-01-01

My name is James Moon and I am a senor at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time sohare applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community.

Research on fabrication of aspheres at the Center of Optics Technology (University of Applied Science in Aalen); Techical Digest

Science.gov (United States)

Boerret, Rainer; Burger, Jochen; Bich, Andreas; Gall, Christoph; Hellmuth, Thomas

2005-05-01

The Center of Optics Technology at the University of Applied Science, founded in 2003, is part of the School of Optics and Mechatronics. It completes the existing optical engineering department with a full optical fabrication and metrology chain and serves in parallel as a technology transfer center, to provide area industries with the most up-to-date technology in optical fabrication and engineering. Two examples of research work will be presented. The first example is the optimizing of the grinding process for high precision aspheres, the other is generating and polishing of a freeform optical element which is used as a phase plate.

Massachusetts Institute of Technology Plasma Fusion Center 1987--1988 report to the President

International Nuclear Information System (INIS)

1988-06-01

During the past year, technical progress has been made in all Plasma Fusion Center (PFC) research programs. The Plasma Fusion Center is recognized as one of the leading university research laboratories in the physics and engineering aspects of magnetic confinement fusion. Its research programs have produced significant results on several fronts: the basic physics of high-temperature plasmas (plasmas theory, RF heating, free electron lasers, development of advanced diagnostics, and intermediate-scale experiments on the Versator tokamak and Constance mirror devices), major confinement results on the Alcator C tokamak, including pioneering investigations of the stability, heating, and confinement properties of plasmas at high densities, temperatures and magnetic fields, experiments on the medium-scale TARA tandem mirror, including the development of novel MHD stabilization techniques in axisymmetric geometry, and a broad program of fusion technology and engineering development that addresses problems in several critical subsystem areas (e.g., magnet systems, superconducting materials development, environmental and safety studies, advanced millimeter-wave source development, and system studies of fusion reactor design, operation, and technology requirements

The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

2003-02-25

In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies.

The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

International Nuclear Information System (INIS)

McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

2003-01-01

In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies

Importance of the documentation of the manual of quality and procedures handbook in the nuclear technology center

International Nuclear Information System (INIS)

Domech More, J.; Bolanos Hernandez, R.; Quitero Rosello, R.; Fernandez Rondon, M.; Milian Lorenzo, D.; Rodriguez Gual, M.

1997-01-01

In the present work is presented the methodology used for the elaboration of manual of quality of the Nuclear Technology Center and the technical Procedures Handbook for the execution of Preliminary Safety report of the Juragua Nuclear Power Plant, as well as the importance that has this documentation for the work of the center

Technical Data Management Center: a focal point for meteorological and other environmental transport computing technology

International Nuclear Information System (INIS)

McGill, B.; Maskewitz, B.F.; Trubey, D.K.

1981-01-01

The Technical Data Management Center, collecting, packaging, analyzing, and distributing information, computer technology and data which includes meteorological and other environmental transport work is located at the Oak Ridge National Laboratory, within the Engineering Physics Division. Major activities include maintaining a collection of computing technology and associated literature citations to provide capabilities for meteorological and environmental work. Details of the activities on behalf of TDMC's sponsoring agency, the US Nuclear Regulatory Commission, are described

Contributions to nuclear safety and radiation technologies in Ukraine by the Science and Technology Center in Ukraine (STCU)

International Nuclear Information System (INIS)

Taranenko, L.; Janouch, F.; Owsiacki, L.

2001-01-01

This paper presents Science and Technology Center in Ukraine (STCU) activities devoted to furthering nuclear and radiation safety, which is a prioritized STCU area. The STCU, an intergovernmental organization with the principle objective of non-proliferation, administers financial support from the USA, Canada, and the EU to Ukrainian projects in various scientific and technological areas; coordinates projects; and promotes the integration of Ukrainian scientists into the international scientific community, including involving western collaborators. The paper focuses on STCU's largest project to date 'Program Supporting Y2K Readiness at Ukrainian NPPs' initiated in April 1999 and designed to address possible Y2K readiness problems at 14 Ukrainian nuclear reactors. Other presented projects demonstrate a wide diversity of supported directions in the fields of nuclear and radiation safety, including reactor material improvement ('Improved Zirconium-Based Elements for Nuclear Reactors'), information technologies for nuclear industries ('Ukrainian Nuclear Data Bank in Slavutich'), and radiation health science ('Diagnostics and Treatment of Radiation-Induced Injuries of Human Biopolymers').

A Review of User-Centered Design for Diabetes-Related Consumer Health Informatics Technologies

Science.gov (United States)

LeRouge, Cynthia; Wickramasinghe, Nilmini

2013-01-01

User-centered design (UCD) is well recognized as an effective human factor engineering strategy for designing ease of use in the total customer experience with products and information technology that has been applied specifically to health care information technology systems. We conducted a literature review to analyze the current research regarding the use of UCD methods and principles to support the development or evaluation of diabetes-related consumer health informatics technology (CHIT) initiatives. Findings indicate that (1) UCD activities have been applied across the technology development life cycle stages, (2) there are benefits to incorporating UCD to better inform CHIT development in this area, and (3) the degree of adoption of the UCD process is quite uneven across diabetes CHIT studies. In addition, few to no studies report on methods used across all phases of the life cycle with process detail. To address that void, the Appendix provides an illustrative case study example of UCD techniques across development stages. PMID:23911188

[Medical equipment companies and their ties with technology development centers in Mexico].

Science.gov (United States)

Hernández, B; Arredondo, A; Cruz, C; Sánchez, E; Damián, T

1993-10-01

The purpose of this study was to determine the characteristics of the companies that produce, distribute, and service medical equipment in Mexico and the factors related to whether or not they had established ties with research and technology development centers. The data analyzed came from a survey of such companies carried out in Mexico City and environs in 1989. The information was updated in 1991. Multivariate analyses were carried out in order to identify the characteristics of companies that had established ties or wished to do so and the areas of interest of those companies. Of 208 companies surveyed, only 23% had ties with research centers. The companies that had such ties or were interested in establishing them tended to invest in research and to have made plans for expansion. The establishment of ties appeared to be a two-way process, with positive consequences for the companies involved, the research centers, and the health sector. It was concluded that it would be advantageous to design programs to promote ties with companies having the characteristics mentioned.

Center for Technology for Advanced Scientific Component Software (TASCS)

Energy Technology Data Exchange (ETDEWEB)

Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

2009-03-30

A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

Institutional overviews. Overview of the JAEA and the Nuclear Nonproliferation Science and Technology Center

International Nuclear Information System (INIS)

Senzaki, Masao

2006-01-01

The Nuclear Nonproliferation Science and Technology Center (NPSTC) was formed within the new Japan Atomic Energy Agency (JAEA) to carry out safeguards and material control duties for the JAEA. Development of technologies and procedures for safeguards is an important duty. In addition, the new NPSTC will assume a 'think tank' role in support of the nonproliferation regime, help train nonproliferation experts, and cooperate with academic, government and non-governmental organizations on nonproliferation issues. This report briefly summarizes the formation of the JAEA and describes the duties and structure of the NPSTC in detail. (author)

Artificial pinning center technology to enhance vortex pinning in YBCO coated conductors

International Nuclear Information System (INIS)

Matsumoto, Kaname; Mele, Paolo

2010-01-01

Crystalline defects on the nano-scale, which are called artificial pinning centers (APCs), were successfully introduced into high-temperature superconductors (HTS) by nanotechnology, in order to strongly pin the quantized vortices. The critical current densities, J c , of the HTS films were dramatically improved by APCs. It is possible to form APCs in high-quality epitaxial films, keeping the desired dimensionality, volume fraction, spatial distribution and so on. The in-field J c of HTS films at 77 K was improved by one order of magnitude compared with previous values using APCs. This technology can be applied to the coated conductor technology in progress, and a high J c has already been reported. A current outline of the research is described in this review.

Massachusetts Institute of Technology, Plasma Fusion Center, 1984-1985. Report to the President

International Nuclear Information System (INIS)

1985-07-01

During the past year, technical progress has been made in all Plasma Fusion Center (PFC) research programs. The Plasma Fusion Center is recognized as one of the leading university research laboratories in the physics and engineering aspects of magnetic confinement fusion. Its research programs have produced significant results on four fronts: (1) the basic physics of high-temperature plasmas (plasma theory, rf heating, free electron lasers, development of advanced diagnostics and small-scale experiments on the Versator tokamak and Constance mirror devices); (2) major confinement results on the Alcator C tokamak, including pioneering investigations of the stability, heating, and confinement properties of plasmas at high densities, temperatures and magnetic fields; (3) development of an innovative design for axisymmetric tandem mirrors with inboard thermal barriers, with initial operation of the TARA tandem mirror experiment beginning in 1984; and (4) a broad program of fusion technology and engineering development that addresses problems in several critical subsystem areas (e.g., magnet systems, superconducting materials development, environmental and safety studies, advanced millimeter wave source development, and system studies of fusion reactor design, operation, and technology requirements). A review of these programs is given

Space Technology Demonstrations Using Low Cost, Short-Schedule Airborne and Range Facilities at the Dryden Flight Research Center

Science.gov (United States)

Carter, John; Kelly, John; Jones, Dan; Lee, James

2013-01-01

There is a national effort to expedite advanced space technologies on new space systems for both government and commercial applications. In order to lower risk, these technologies should be demonstrated in a relevant environment before being installed in new space systems. This presentation introduces several low cost, short schedule space technology demonstrations using airborne and range facilities available at the Dryden Flight Research Center.

Technology Can Help Young Children Succeed. PACER Center ACTion Information Sheets: PHP-c70

Science.gov (United States)

PACER Center, 2014

2014-01-01

Parents of young children with disabilities are discovering that carefully selected computer software and mobile apps can provide many benefits such as improved self-esteem, a longer attention span, and inclusion among family and other children that help their children succeed at home and in school. PACER's Simon Technology Center (STC) can help…

Tuberculosis management practices by private practitioners in Andhra Pradesh, India.

Science.gov (United States)

Achanta, Shanta; Jaju, Jyoti; Kumar, Ajay M V; Nagaraja, Sharath Burugina; Shamrao, Srinivas Rao Motta; Bandi, Sasidhar Kumar; Kumar, Ashok; Satyanarayana, Srinath; Harries, Anthony David; Nair, Sreenivas Achutan; Dewan, Puneet K

2013-01-01

Private medical practitioners in Visakhapatnam district, Andhra Pradesh, India. To evaluate self-reported TB diagnostic and treatment practices amongst private medical practitioners against benchmark practices articulated in the International Standards of Tuberculosis Care (ISTC), and factors associated with compliance with ISTC. Cross- sectional survey using semi-structured interviews. Of 296 randomly selected private practitioners, 201 (68%) were assessed for compliance to ISTC diagnostic and treatment standards in TB management. Only 11 (6%) followed a combination of 6 diagnostic standards together and only 1 followed a combination of all seven treatment standards together. There were 28 (14%) private practitioners who complied with a combination of three core ISTC (cough for tuberculosis suspects, sputum smear examination and use of standardized treatment). Higher ISTC compliance was associated with caring for more than 20 TB patients annually, prior sensitization to TB control guidelines, and practice of alternate systems of medicine. Few private practitioners in Visakhapatnam, India reported TB diagnostic and treatment practices that met ISTC. Better engagement of the private sector is urgently required to improve TB management practices and to prevent diagnostic delay and drug resistance.

Mode 2 in action. Working across sectors to create a Center for Humanities and Technology

NARCIS (Netherlands)

Wyatt, S.M.E.

2015-01-01

This article examines recent developments in Amsterdam to establish a Center for Humanities and Technology (CHAT). The project is a collaboration between public research institutions and a private partner. To date, a White Paper has been produced that sets out a shared research agenda addressing

Development and Implementation of the Midwest Geological Sequestration Consortium CO₂-Technology Transfer Center

Energy Technology Data Exchange (ETDEWEB)

Greenberg, Sallie E. [Univ. of Illinois, Champaign, IL (United States)

2015-06-30

In 2009, the Illinois State Geological Survey (ISGS), in collaboration with the Midwest Geological Sequestration Consortium (MGSC), created a regional technology training center to disseminate carbon capture and sequestration (CCS) technology gained through leadership and participation in regional carbon sequestration projects. This technology training center was titled and branded as the Sequestration Training and Education Program (STEP). Over the last six years STEP has provided local, regional, national, and international education and training opportunities for engineers, geologists, service providers, regulators, executives, K-12 students, K-12 educators, undergraduate students, graduate students, university and community college faculty members, and participants of community programs and functions, community organizations, and others. The goal for STEP educational programs has been on knowledge sharing and capacity building to stimulate economic recovery and development by training personnel for commercial CCS projects. STEP has worked with local, national and international professional organizations and regional experts to leverage existing training opportunities and provide stand-alone training. This report gives detailed information on STEP activities during the grant period (2009-2015).

Recidivism Study: Positive Terminations from J. F. Ingram State Technical College, 1976-1986.

Science.gov (United States)

Cogburn, Helen E.

In 1988, a study was conducted by the J. F. Ingram State Technical College (ISTC) to determine recidivism rates for incarcerated individuals who earned a diploma and/or a General Educational Development (GED) certificate at ISTC during the years 1976 through 1986. The identification numbers of 2,844 students who had completed programs at ISTC were…

Contributions to nuclear safety and radiation technologies in Ukraine by the Science and Technology Center in Ukraine (STCU)

Energy Technology Data Exchange (ETDEWEB)

Taranenko, L. E-mail: lyubov@stcu.kiev.ua; Janouch, F.; Owsiacki, L

2001-06-01

This paper presents Science and Technology Center in Ukraine (STCU) activities devoted to furthering nuclear and radiation safety, which is a prioritized STCU area. The STCU, an intergovernmental organization with the principle objective of non-proliferation, administers financial support from the USA, Canada, and the EU to Ukrainian projects in various scientific and technological areas; coordinates projects; and promotes the integration of Ukrainian scientists into the international scientific community, including involving western collaborators. The paper focuses on STCU's largest project to date 'Program Supporting Y2K Readiness at Ukrainian NPPs' initiated in April 1999 and designed to address possible Y2K readiness problems at 14 Ukrainian nuclear reactors. Other presented projects demonstrate a wide diversity of supported directions in the fields of nuclear and radiation safety, including reactor material improvement ('Improved Zirconium-Based Elements for Nuclear Reactors'), information technologies for nuclear industries ('Ukrainian Nuclear Data Bank in Slavutich'), and radiation health science ('Diagnostics and Treatment of Radiation-Induced Injuries of Human Biopolymers')

KBTAC: EPRI's center to assist the nuclear industry to apply the knowledge-based technology

International Nuclear Information System (INIS)

Lin, Chinglu; Naser, J.A.; Sun, B.K.H.

1993-01-01

The nuclear utility industry's complex engineering and procedure systems offer many opportunities for use of the knowledge-based technology such as expert systems and neural networks. The ability of expert systems to enhance human experts makes them an important tool in the areas of engineering, operations and maintenance. However, many current industry applications are research projects or turnkey systems supplied by vendors. These often do not impart to utility technical staff a clear understanding of the capabilities of knowledge-based systems (KBS). More importantly, simply using completed applications does not meet utilities' need to acquire the capabilities to build their own knowledge-based systems. Thus, EPRI is supporting its member utilities utilization of knowledge-based technology for power plant engineering, operations, and maintenance applications through the establishment of the Knowledge-Based Technology Application Center (KBTAC)

Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

Science.gov (United States)

Quick, Jason

2009-01-01

The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the

Tuberculosis management practices by private practitioners in Andhra Pradesh, India.

Directory of Open Access Journals (Sweden)

Shanta Achanta

Full Text Available SETTING: Private medical practitioners in Visakhapatnam district, Andhra Pradesh, India. OBJECTIVES: To evaluate self-reported TB diagnostic and treatment practices amongst private medical practitioners against benchmark practices articulated in the International Standards of Tuberculosis Care (ISTC, and factors associated with compliance with ISTC. DESIGN: Cross- sectional survey using semi-structured interviews. RESULTS: Of 296 randomly selected private practitioners, 201 (68% were assessed for compliance to ISTC diagnostic and treatment standards in TB management. Only 11 (6% followed a combination of 6 diagnostic standards together and only 1 followed a combination of all seven treatment standards together. There were 28 (14% private practitioners who complied with a combination of three core ISTC (cough for tuberculosis suspects, sputum smear examination and use of standardized treatment. Higher ISTC compliance was associated with caring for more than 20 TB patients annually, prior sensitization to TB control guidelines, and practice of alternate systems of medicine. CONCLUSION: Few private practitioners in Visakhapatnam, India reported TB diagnostic and treatment practices that met ISTC. Better engagement of the private sector is urgently required to improve TB management practices and to prevent diagnostic delay and drug resistance.

Research Center for Optical Physics: Education and Technology for the 21st Century

Science.gov (United States)

2003-01-01

During the past eleven years since its inception, RCOP has excelled in its two primary goals: 1) training of the scientists and engineers needed for the twenty-first century with special emphasis on underrepresented citizens and 2) research and technological development in areas of relevance to NASA. In the category of research training, as of May 2003, RCOP produced 36 Bachelors degrees, 25 Masters degrees, and 13 Doctoral degrees. Of these, all 36 Bachelors degrees, 16 of the Masters degrees and 9 of the Doctoral degrees were awarded to African Americans. Four of the Doctoral graduates and one of the Masters graduates are working at NASA Field Centers. RCOP has also provided research experiences to 130 undergraduate students and 22 high school students through a number of outreach programs held during the summer and the academic year. RCOP has also been crucial to the development of the Ph.D. program in physics at Hampton University by providing high quality research training and technical electives required for a Doctoral degree in physics. RCOP has also excelled in research and technological development. Since 1992, RCOP researchers have leveraged over 8 million dollars in additional research funding, published 152 papers in refereed journals and proceedings, and given 125 presentations at refereed international conferences in the United States and eight other countries. RCOP also developed numerous collaborations with other research centers, universities and industries. In recognition of this outstanding work, RCOP is the first research center in the United States invited to join the Joint Open Laboratory for Laser Crystals and Precise Laser Systems headed by Dr. Alexander Kaminiskii of the Russian Academy of Sciences.

CAD/BIM Technology Center

Data.gov (United States)

Federal Laboratory Consortium — Supporting Better Decisions in Facility, Infrastructure, and Environment ManagementAccess to technology tools to model structures before they are built can provide...

Moscow DMZ: The story of the international effort to convert Russian weapons science to peaceful purposes

International Nuclear Information System (INIS)

Schweitzer, G.E.

1996-01-01

ISTC created a program to re-employ former Soviet scientists in civilian projects dealing with environmental pollution, nuclear safety, and economic underdevelopment: in short, the legacy of the Soviet system. Glenn E. Schweitzer was the first Executive Director of ISTC, based in Moscow, and his book is additionally a vivid personal account of his impressions of life and work in Moscow as he set about establishing ISTC

Mississippi State University Center for Air Sea Technology FY95 Research Program

Science.gov (United States)

Yeske, Lanny; Corbin, James H.

1995-01-01

The Mississippi State University (MSU) Center for Air Sea Technology (CAST) evolved from the Institute for Naval Oceanography's (INO) Experimental Center for Mesoscale Ocean Prediction (ECMOP) which was started in 1989. MSU CAST subsequently began operation on 1 October 1992 under an Office of Naval Research (ONR) two-year grant which ended on 30 September 1994. In FY95 MSU CAST was successful in obtaining five additional research grants from ONR, as well as several other research contracts from the Naval Oceanographic Office via NASA, the Naval Research Laboratory, the Army Corps of Engineers, and private industry. In the past, MSU CAST technical research and development has produced tools, systems, techniques, and procedures that improve efficiency and overcome deficiency for both the operational and research communities residing with the Department of Defense, private industry, and university ocean modeling community. We continued this effort with the following thrust areas: to develop advanced methodologies and tools for model evaluation, validation and visualization, both oceanographic and atmospheric; to develop a system-level capability for conducting temporally and ; spatially scaled ocean simulations driven by or are responsive to ocean models, and take into consideration coupling to atmospheric models; to continue the existing oceanographic/atmospheric data management task with emphasis on distributed databases in a network environment, with database optimization and standardization, including use of Mosaic and World Wide Web (WWW) access; and to implement a high performance parallel computing technology for CAST ocean models

Standards, Firewalls, and General Classroom Mayhem: Implementing Student-Centered Technology Projects in the Elementary Classroom

Science.gov (United States)

Hofer, Mark; Swan, Kathleen Owings

2006-01-01

Educators are simultaneously bombarded with both calls to integrate technology in meaningful ways into their teaching and to promote more student-centered activities which combine both content learning and higher-order thinking. This is no small task given the range of student abilities and interests, the increasing emphasis on state standards and…

Two new research melters at the Savannah River Technology Center

International Nuclear Information System (INIS)

Gordon, J.R.; Coughlin, J.T.; Minichan, R.L.; Zamecnik, J.R.

2000-01-01

The Savannah River Technology Center (SRTC) is a US Department of Energy (DOE) complex leader in the development of vitrification technology. To maintain and expand this SRTC core technology, two new melter systems are currently under construction in SRTC. This paper discusses the development of these two new systems, which will be used to support current as well as future vitrification programs in the DOE complex. The first of these is the new minimelter, which is a joule-heated glass melter intended for experimental melting studies with nonradioactive glass waste forms. Testing will include surrogates of Defense Waste processing Facility (DWPF) high-level wastes. To support the DWPF testing, the new minimelter was scaled to the DWPF melter based on melt surface area. This new minimelter will replace an existing system and provide a platform for the research and development necessary to support the SRTC vitrification core technology mission. The second new melter is the British Nuclear Fuels, Inc., research melter system (BNFL melter), which is a scaled version of the BNFL low-activity-waste (LAW) melter proposed for vitrification of LAW at Hanford. It is designed to process a relatively large amount of actual radiative Hanford tank waste and to gather data on the composition of off-gases that will be generated by the LAW melter. Both the minimelter and BNFL melter systems consist of five primary subsystems: melter vessel, off-gas treatment, feed, power supply, and instrumentation and controls. The configuration and design of these subsystems are tailored to match the current system requirements and provide the flexibility to support future DOE vitrification programs. This paper presents a detailed discussion of the unique design challenges represented by these two new melter systems

15 CFR 290.8 - Reviews of centers.

Science.gov (United States)

2010-01-01

... TRANSFER OF MANUFACTURING TECHNOLOGY § 290.8 Reviews of centers. (a) Overview. Each Center will be reviewed... involved Center, and Federal officials. An official of NIST shall chair the panel. Each Merit Review Panel... Center be provided by the NIST Manufacturing Technology Centers Program after the sixth year of support...

SDM center technologies for accelerating scientific discoveries

International Nuclear Information System (INIS)

Shoshani, Arie; Altintas, Ilkay; Choudhary, Alok; Critchlow, Terence; Kamath, Chandrika; Ludaescher, Bertram; Nieplocha, Jarek; Parker, Steve; Ross, Rob; Samatova, Nagiza; Vouk, Mladen

2007-01-01

With the increasing volume and complexity of data produced by ultra-scale simulations and high-throughput experiments, understanding the science is largely hampered by the lack of comprehensive, end-to-end data management solutions ranging from initial data acquisition to final analysis and visualization. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced data management technologies to DOE application scientists in astrophysics, climate, fusion, and biology. Equally important, it established collaborations with these scientists to better understand their science as well as their forthcoming data management and data analytics challenges. Our future focus is on improving the SDM framework to address the needs of ultra-scale science during SciDAC-2. Specifically, we are enhancing and extending our existing tools to allow for more interactivity and fault tolerance when managing scientists' workflows, for better parallelism and feature extraction capabilities in their data analytics operations, and for greater efficiency and functionality in users' interactions with local parallel file systems, active storage, and access to remote storage. These improvements are necessary for the scalability and complexity challenges presented by hardware and applications at ultra scale, and are complemented by continued efforts to work with application scientists in various domains

DOE's SciDAC Visualization and Analytics Center for EnablingTechnologies -- Strategy for Petascale Visual Data Analysis Success

Energy Technology Data Exchange (ETDEWEB)

Bethel, E Wes; Johnson, Chris; Aragon, Cecilia; Rubel, Oliver; Weber, Gunther; Pascucci, Valerio; Childs, Hank; Bremer, Peer-Timo; Whitlock, Brad; Ahern, Sean; Meredith, Jeremey; Ostrouchov, George; Joy, Ken; Hamann, Bernd; Garth, Christoph; Cole, Martin; Hansen, Charles; Parker, Steven; Sanderson, Allen; Silva, Claudio; Tricoche, Xavier

2007-10-01

The focus of this article is on how one group of researchersthe DOE SciDAC Visualization and Analytics Center for EnablingTechnologies (VACET) is tackling the daunting task of enabling knowledgediscovery through visualization and analytics on some of the world slargest and most complex datasets and on some of the world's largestcomputational platforms. As a Center for Enabling Technology, VACET smission is the creation of usable, production-quality visualization andknowledge discovery software infrastructure that runs on large, parallelcomputer systems at DOE's Open Computing facilities and that providessolutions to challenging visual data exploration and knowledge discoveryneeds of modern science, particularly the DOE sciencecommunity.

The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Johnson, Nicholi S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-28

The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

Techniques for evaluating optimum data center operation

Science.gov (United States)

Hamann, Hendrik F.; Rodriguez, Sergio Adolfo Bermudez; Wehle, Hans-Dieter

2017-06-14

Techniques for modeling a data center are provided. In one aspect, a method for determining data center efficiency is provided. The method includes the following steps. Target parameters for the data center are obtained. Technology pre-requisite parameters for the data center are obtained. An optimum data center efficiency is determined given the target parameters for the data center and the technology pre-requisite parameters for the data center.

Review of the ISTC innovative nuclear programs (information review)

Energy Technology Data Exchange (ETDEWEB)

Tocheny, L. V. [ISTC - International Science and Technology Center, Moscow (Russian Federation)

2006-07-01

The information will be included in the review, with special attention on details of corresponding experimental programs: Novel reactor concepts, fit with GIF and INPRO: Supercritical Pressure Water aspects, Heavy metals (Lead, Lead-Bismuth) technology, HTGR critical modeling, engineering. Molten salts. Reactor data benchmarking, Accelerator Driven Systems (experimental modelling), Nuclear data measurements, Severe accident study (corium modelling, QUENCH, Chernobyl), Experimental Analysis of Hydraulically Induced Vibrations in Compact Curling Tube Steam Generators. (authors)

Innovation and the English National Health Service: a qualitative study of the independent sector treatment centre programme.

Science.gov (United States)

Turner, Simon; Allen, Pauline; Bartlett, Will; Pérotin, Virginie

2011-08-01

Over the past two decades, an international trend of exposing public health services to different forms of economic organisation has emerged. In the English National Health Service (NHS), care is currently provided through a quasi-market including 'diverse' providers from the private and third sector. The predominant scheme through which private sector companies have been awarded NHS contracts is the Independent Sector Treatment Centre (ISTC) programme. ISTCs were designed to produce innovative models of service delivery for elective care and stimulate innovation among incumbent NHS providers. This paper investigates these claims using qualitative data on the impact of an ISTC upon a local health economy (LHE) composed of NHS organisations in England. Using the case of elective orthopaedic surgery, we conducted semi-structured interviews with senior managers from incumbent NHS providers and an ISTC in 2009. We show that ISTCs exhibit a different relationship with frontline clinicians because they counteract the power of professional communities associated with the NHS. This has positive and negative consequences for innovation. ISTCs have introduced new routines unencumbered by the extant norms of professional communities, but they appear to represent weaker learning environments and do not reproduce cooperation across organisational boundaries to the same extent as incumbent NHS providers. Copyright © 2011 Elsevier Ltd. All rights reserved.

How a diverse research ecosystem has generated new rehabilitation technologies: Review of NIDILRR's Rehabilitation Engineering Research Centers.

Science.gov (United States)

Reinkensmeyer, David J; Blackstone, Sarah; Bodine, Cathy; Brabyn, John; Brienza, David; Caves, Kevin; DeRuyter, Frank; Durfee, Edmund; Fatone, Stefania; Fernie, Geoff; Gard, Steven; Karg, Patricia; Kuiken, Todd A; Harris, Gerald F; Jones, Mike; Li, Yue; Maisel, Jordana; McCue, Michael; Meade, Michelle A; Mitchell, Helena; Mitzner, Tracy L; Patton, James L; Requejo, Philip S; Rimmer, James H; Rogers, Wendy A; Zev Rymer, W; Sanford, Jon A; Schneider, Lawrence; Sliker, Levin; Sprigle, Stephen; Steinfeld, Aaron; Steinfeld, Edward; Vanderheiden, Gregg; Winstein, Carolee; Zhang, Li-Qun; Corfman, Thomas

2017-11-06

Over 50 million United States citizens (1 in 6 people in the US) have a developmental, acquired, or degenerative disability. The average US citizen can expect to live 20% of his or her life with a disability. Rehabilitation technologies play a major role in improving the quality of life for people with a disability, yet widespread and highly challenging needs remain. Within the US, a major effort aimed at the creation and evaluation of rehabilitation technology has been the Rehabilitation Engineering Research Centers (RERCs) sponsored by the National Institute on Disability, Independent Living, and Rehabilitation Research. As envisioned at their conception by a panel of the National Academy of Science in 1970, these centers were intended to take a "total approach to rehabilitation", combining medicine, engineering, and related science, to improve the quality of life of individuals with a disability. Here, we review the scope, achievements, and ongoing projects of an unbiased sample of 19 currently active or recently terminated RERCs. Specifically, for each center, we briefly explain the needs it targets, summarize key historical advances, identify emerging innovations, and consider future directions. Our assessment from this review is that the RERC program indeed involves a multidisciplinary approach, with 36 professional fields involved, although 70% of research and development staff are in engineering fields, 23% in clinical fields, and only 7% in basic science fields; significantly, 11% of the professional staff have a disability related to their research. We observe that the RERC program has substantially diversified the scope of its work since the 1970's, addressing more types of disabilities using more technologies, and, in particular, often now focusing on information technologies. RERC work also now often views users as integrated into an interdependent society through technologies that both people with and without disabilities co-use (such as the internet

Annual report of nuclear technology and education center. April 1, 2003 - March 31, 2004

International Nuclear Information System (INIS)

2004-10-01

This report summarizes the activities of Nuclear Technology and Education Center (NuTEC) is Japan Atomic Energy Research Institute in FY 2003. It includes the domestic educational activities and the international training activities mainly for Asia-Pacific region as well as the activities of the research and the development for training courses and administrative aspects. The courses yet carried out in Tokyo Education Center were begun to operate in the facilities of the Tokai Research Establishment. Aiming at carrying out training activities more effectively and efficiently, the training division system related to the training fields have started together with that. Most of the scheduled training courses for the FY2003 have been carried out as planned and the total number of the trainees completing the courses was 1,311. The building of the Tokyo Education Center was demolished and removed after the decontamination, decommissioning procedures. The land was returned to the land owner by the end of FY 2003. In addition to these activities, research and development for the improvement of education and training were carried out. (author)

Production technology readiness assessment of surfactant in the research center for Chemistry-Indonesian Institute of Sciences

Science.gov (United States)

Setiawan, Arief Ameir Rahman; Sulaswatty, Anny

2017-11-01

The common problem faced by the institution working on research, innovation and technology development is lack of quantitative measures to determine the technology readiness of research. No common communication language between R & D Institutions and industry about the level of preparedness of a research resulting a barrier to technology diffusion interaction. This lack of connection between R & D institutes with industry may lead to "sluggishness" occurs in innovating. For such circumstance, assessing technology readiness of research is very important. One of wide spread methods for the assessment is Technology Readiness Level (TRL, also known as Technometer), which is introduced by NASA (National Aeronautics and Space Administration). TRL is a general guide that provides an overview of maturity level of a technology. This study aims to identify and demonstrate the implementation of TRL to assess a number of surfactant researches in the Research Center for Chemistry, Indonesian Institute of Sciences. According to the assessment, it has been obtained the surfactant recommended for further development towards commercialization of R & D results, i.e. Glycerol Mono Stearate (GMS), which has reached the level of TRL 7.

Mobilizing Learning Resources in a Transnational Classroom: Translocal and Digital Resources in a Community Technology Center

Science.gov (United States)

Noguerón-Liu, Silvia

2014-01-01

Drawing from transnational and activity theory frameworks, this study analyzes the ways translocal flows shape learning in a community technology center serving adult immigrants in the US Southwest. It also explores students' constructions of the transnational nature of the courses they took, where they had access to both online and face-to-face…

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-03-30

A vendor was selected for the diamond wire technology demonstration scheduled for this summer at Princeton Plasma Physics Laboratory (PPPL). A team consisting of personnel from FIU-HCET, PPPL, and AEA Technology reviewed the submitted bids. FIU-HCET will contract this vendor. At the SRS Ninth ICT teleconference, the ICT team discussed the status of the following demonstrations: LRAD; x-ray, K-edge; Strippable Coatings; Thermal Spray Vitrification; Cutting/Shearing/Dismantlement/Size Reduction; and Electrets. The LRAD demo is complete, and the x-ray/K-edge, Strippable Coatings, and Electrets demos are ongoing. The Asbestos and Thermal Spray Vitrification demos require more laboratory testing. The Cutting/Shearing/Dismantlement/Size Reduction demo is undergoing procurement. Five FIU-HCET staff members took the 1S0 14000 environmental auditor training course February 22-26, 1999, given by ASC. The test plan for the Facility Dismantlement Technology Assessment is finished and ready for internal review.

Installation of a technological center for highly efficient optical gratings at Helmholtz-Zentrum Berlin (HZB)

International Nuclear Information System (INIS)

Loechel, B; Erko, A; Lemke, St; Senf, F; Nelles, B; Schmidt, M

2013-01-01

In 2009 Carl Zeiss stopped the manufacture of precision gratings. All users of their gratings were very concerned about this decision, since they all need precision gratings for their experiments. One of the institutes of the HZB, the Institute for Nanometer Optics and Technology (INT), has extensive experience in micro fabrication (technology group). In spring 2010, HZB decided to take over the old C. Zeiss grating fabrication and build up its own technology center for grating fabrication. In March 2010, the INT applied to the Senate of Berlin for funding for our project from the European Regional Development Fund (ERDF). In October 2010, HZB received an approval of its application from the Senate of Berlin (contract No 20072013 2/43). Using this governmental support, HZB will install all necessary equipment and processes to fulfill these demands until end of 2013.

Status and future application of pilot lead-bismuth target circuit TC-1 for ADS

Energy Technology Data Exchange (ETDEWEB)

Ignatiev, S.; Leonchuk, M.; Orlov, Y.; Pankratov, D.; Reshetnikova, O.; Suvorov, G.; Zabudko, A. [Institute for Physics and Power Engineering, Obninsk (Russian Federation); Stepanov, V.; Klimov, N. [Experimental and Design Organization, Gidropress, Podolsk (Russian Federation); Hechanova, A.; Ma, J. [Nevada Univ., Las Vegas, NV (United States); Li, N. [Los Alamos National Lab., NM (United States); Gudowski, W. [International Science and Technology Center, Moscow (Russian Federation)

2007-07-01

A complicated evolution, status and future application of the pilot molten lead-bismuth target circuit of 1 MW proton beam power (TC-1) as an important part of a target-blanket accelerator driven system (ADS), that has been developed, created and twice tested under the auspice of the International Science and Technology Center (ISTC), is analyzed. The target complex TC-1 is a circulation lead-bismuth loop whose beam window is made of ferritic steel EP-823 (this steel was used in the past as material of fuel rods cladding in reactors cooled with lead-bismuth). At present TC-1 is operating at coolant temperature up to 300 C degrees and will be used to study different issues linked to the use of lead-bismuth: -) interaction with air, water and hydrogen, -) different regimes of flow, -) corrosion, -) filtering, or -) slag formation.

Information technology-enabled team-based, patient-centered care: The example of depression screening and management in cancer care.

Science.gov (United States)

Randhawa, Gurvaneet S; Ahern, David K; Hesse, Bradford W

2017-03-01

The existing healthcare delivery systems across the world need to be redesigned to ensure high-quality care is delivered to all patients. This redesign needs to ensure care is knowledge-based, patient-centered and systems-minded. The rapid advances in the capabilities of information and communication technology and its recent rapid adoption in healthcare delivery have ensured this technology will play a vital role in the redesign of the healthcare delivery system. This commentary highlights promising new developments in health information technology (IT) that can support patient engagement and self-management as well as team-based, patient-centered care. Collaborative care is an effective approach to screen and treat depression in cancer patients and it is a good example of the benefits of team-based and patient-centered care. However, this approach was developed prior to the widespread adoption and use of health IT. We provide examples to illustrate how health IT can improve prevention and treatment of depression in cancer patients. We found several knowledge gaps that limit our ability to realize the full potential of health IT in the context of cancer and comorbid depression care. These gaps need to be filled to improve patient engagement; enhance the reach and effectiveness of collaborative care and web-based programs to prevent and treat depression in cancer patients. We also identify knowledge gaps in health IT design and implementation. Filling these gaps will help shape policies that enable clinical teams to deliver high-quality cancer care globally.

NASA Center for Climate Simulation (NCCS) Advanced Technology AT5 Virtualized Infiniband Report

Science.gov (United States)

Thompson, John H.; Bledsoe, Benjamin C.; Wagner, Mark; Shakshober, John; Fromkin, Russ

2013-01-01

The NCCS is part of the Computational and Information Sciences and Technology Office (CISTO) of Goddard Space Flight Center's (GSFC) Sciences and Exploration Directorate. The NCCS's mission is to enable scientists to increase their understanding of the Earth, the solar system, and the universe by supplying state-of-the-art high performance computing (HPC) solutions. To accomplish this mission, the NCCS (https://www.nccs.nasa.gov) provides high performance compute engines, mass storage, and network solutions to meet the specialized needs of the Earth and space science user communities

Electric Power Research Institute Environmental Control Technology Center Report to the Steering Committee

Energy Technology Data Exchange (ETDEWEB)

None, None

1998-01-12

Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC). Testing for the month involved the Dry Sorbent Injection (DSI) test block with the Carbon Injection System. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit, the 0.4 MW Mini-Pilot Wet Scrubber, and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. These units remain available for testing as future project work is identified.

Tiger Team Assessment of the Pittsburgh Energy Technology Center, [August 19--September 13, 1991

International Nuclear Information System (INIS)

1991-09-01

This report documents the results of the Department of Energy (DOE) Tiger Team Assessment conducted at Pittsburgh Energy Technology Center (PETC) near Pittsburgh, Pennsylvania, between August 19 and September 13, 1991. A team comprised of professionals from the Department, its contractors, and consultants conducted the assessment. The purpose of the assessment was to provide the Secretary of Energy the status of environment, safety, and health (ES ampersand H) programs at PETC. A management assessment was performed

Space Solar Power Satellite Technology Development at the Glenn Research Center: An Overview

Science.gov (United States)

Dudenhoefer, James E.; George, Patrick J.

2000-01-01

NASA Glenn Research Center (GRC). is participating in the Space Solar Power Exploratory Research and Technology program (SERT) for the development of a solar power satellite concept. The aim of the program is to provide electrical power to Earth by converting the Sun's energy and beaming it to the surface. This paper will give an overall view of the technologies being pursued at GRC including thin film photovoltaics, solar dynamic power systems, space environmental effects, power management and distribution, and electric propulsion. The developmental path not only provides solutions to gigawatt sized space power systems for the future, but provides synergistic opportunities for contemporary space power architectures. More details of Space Solar Power can be found by reading the references sited in this paper and by connecting to the web site http://moonbase.msfc.nasa.gov/ and accessing the "Space Solar Power" section "Public Access" area.

A new concept for medical imaging centered on cellular phone technology.

Directory of Open Access Journals (Sweden)

Yair Granot

2008-04-01

Full Text Available According to World Health Organization reports, some three quarters of the world population does not have access to medical imaging. In addition, in developing countries over 50% of medical equipment that is available is not being used because it is too sophisticated or in disrepair or because the health personnel are not trained to use it. The goal of this study is to introduce and demonstrate the feasibility of a new concept in medical imaging that is centered on cellular phone technology and which may provide a solution to medical imaging in underserved areas. The new system replaces the conventional stand-alone medical imaging device with a new medical imaging system made of two independent components connected through cellular phone technology. The independent units are: a a data acquisition device (DAD at a remote patient site that is simple, with limited controls and no image display capability and b an advanced image reconstruction and hardware control multiserver unit at a central site. The cellular phone technology transmits unprocessed raw data from the patient site DAD and receives and displays the processed image from the central site. (This is different from conventional telemedicine where the image reconstruction and control is at the patient site and telecommunication is used to transmit processed images from the patient site. The primary goal of this study is to demonstrate that the cellular phone technology can function in the proposed mode. The feasibility of the concept is demonstrated using a new frequency division multiplexing electrical impedance tomography system, which we have developed for dynamic medical imaging, as the medical imaging modality. The system is used to image through a cellular phone a simulation of breast cancer tumors in a medical imaging diagnostic mode and to image minimally invasive tissue ablation with irreversible electroporation in a medical imaging interventional mode.

Case-mix & patients' reports of outcome in Independent Sector Treatment Centres: Comparison with NHS providers.

Science.gov (United States)

Browne, John; Jamieson, Liz; Lewsey, Jim; van der Meulen, Jan; Copley, Lynn; Black, Nick

2008-04-09

There has been considerable concern expressed about the outcomes achieved in Independent Sector Treatment Centres (ISTCs) introduced in England since 2003. Our aim was to compare the case-mix and patients' reported outcomes of surgery in ISTCs and in NHS providers. Prospective cohort study of 769 patients treated in six ISTCs and 1895 treated in 20 NHS providers (acute hospitals and treatment centres) in England during 2006-07. Participants underwent one of three day surgery procedures (inguinal hernia repair, varicose vein surgery, cataract extraction) or hip or knee replacement. Change in patient-reported health status and health related quality of life (measured using a disease-specific and a generic (EQ-5D) instrument) was assessed either 3-months (day surgery) or 6-months (hip/knee) after surgery. In addition patient-reported post-operative complications and an overall assessment of success of surgery were collected. Outcome measures were adjusted (using multivariable regression) for patient characteristics (disease severity, duration of symptoms, age, sex, socioeconomic status, general health, previous similar surgery, comorbidity). Post-operative response rates varied by procedure (73%-88%) and were similar for those treated in ISTCs and NHS facilities. Patients treated in ISTCs were healthier, were less likely to have any comorbidity and, for those undergoing cataract surgery or joint replacement, their primary condition was less severe. Those undergoing hernia repair or joint replacement were less likely to have had similar surgery before. When adjustment was made for pre-operative characteristics, patients undergoing cataract surgery or hip replacement in ISTCs achieved a slightly greater improvement in functional status and quality of life than those treated in NHS facilities, while the opposite was true of patients undergoing hernia repair. No significant differences were found for the two other procedures. Patients treated in ISTCs were less likely to

Impact of new technologies on stress, attrition and well-being in emergency call centers: the NextGeneration 9-1-1 study protocol.

Science.gov (United States)

Baseman, Janet; Revere, Debra; Painter, Ian; Stangenes, Scott; Lilly, Michelle; Beaton, Randal; Calhoun, Rebecca; Meischke, Hendrika

2018-05-04

Our public health emergency response system relies on the "first of the first responders"-the emergency call center workforce that handles the emergency needs of a public in distress. Call centers across the United States have been preparing for the "Next Generation 9-1-1" initiative, which will allow citizens to place 9-1-1 calls using a variety of digital technologies. The impacts of this initiative on a workforce that is already highly stressed is unknown. There is concern that these technology changes will increase stress, reduce job performance, contribute to maladaptive coping strategies, lower employee retention, or change morale in the workplace. Understanding these impacts to inform approaches for mitigating the health and performance risks associated with new technologies is crucial for ensuring the 911 system fulfills its mission of providing optimal emergency response to the public. Our project is an observational, prospective cohort study framed by the first new technology that will be implemented: text-to-911 calling. Emergency center call takers will be recruited nationwide. Data will be collected by online surveys distributed at each center before text-to-911 implementation; within the first month of implementation; and 6 months after implementation. Primary outcome measures are stress as measured by the Calgary Symptoms of Stress Index, use of sick leave, job performance, and job satisfaction. Primary analyses will use mixed effects regression models and mixed effects logistic regression models to estimate the change in outcome variables associated with text-to-911 implementation. Multiple secondary analyses will examine effects of stress on absenteeism; associations between technology attitudes and stress; effects of implementation on attitudes towards technology; and mitigating effects of job demands, job satisfaction, attitudes towards workplace technology and workplace support on change in stress. Our public health dependence on this workforce

4 years of successful knowledge transfer - the nuclear technology training center of the TUeV Nord Group

International Nuclear Information System (INIS)

Willenbockel, I.; Tietze, U.

2007-01-01

In connection with the 2002 amendment to the German Atomic Energy Act, the topics of generational change and maintenance of competence grew in importance and necessitated new solution approaches. To this end, various activities were launched, with the aim of conducting conceptual analyses of these topics. Examples include the 'National Competence Network for Nuclear Technology' (Nationaler Kompetenzverbund fuer Kerntechnik), various networks established by colleges and universities, the 'Knowledge Management for the Maintenance and Transfer of Competence in Reactor Safety' (Wissensmanagement zum Kompetenzerhalt und -transfer in der Reaktorsicherheit) workshop held in 2001 in Garching near Munich (Germany) and the 'Ad-hoc Workgroup on the Maintenance of Competence' (Ad-hoc-Arbeitskreis Kompetenzerhalt) of the VdTUeV. The nuclear technology departments of the TUeV Nord Group were aware of te challenges associated with the generational change early on. By establishing the 'Nuclear Technology Training Center' (Ausbildungszentrum fuer Kerntechnik, AfK), the TUeV Nord Group intended to ensure the required knowledge transfer during the generational change as well as maintain the renowned high qualification as regards the subject of nuclear technology and thus continue to provide - in the sense of social responsibility - crucial contribution to the long-term safety of nuclear plants. Four years have passed since the training center held the first courses in the fall of 2002. Up to now, more than 350 participants have been trained in the courses conducted by the AfK. In the opinion of the TUeV Nord Group, the activities of the AfK have laid the foundation for a successful change of generations within the group's nuclear technology organizations. (orig.)

From chemicals to cold plasma: Non-thermal food processing technologies research at the USDA's Eastern Regional Research Center

Science.gov (United States)

Foodborne pathogens cause millions of illnesses every year. At the US Department of Agriculture’s Eastern Regional Research Center, scientists and engineers have focused on developing new ways to improve food safety and shelf life while retaining quality and nutritional value. A variety of technolog...

Idaho Nuclear Technology and Engineering Center Newly Generated Liquid Waste Demonstration Project Feasibility Study

International Nuclear Information System (INIS)

Herbst, A.K.

2000-01-01

A research, development, and demonstration project for the grouting of newly generated liquid waste (NGLW) at the Idaho Nuclear Technology and Engineering Center is considered feasible. NGLW is expected from process equipment waste, decontamination waste, analytical laboratory waste, fuel storage basin waste water, and high-level liquid waste evaporator condensate. The potential grouted waste would be classed as mixed low-level waste, stabilized and immobilized to meet RCRA LDR disposal in a grouting process in the CPP-604 facility, and then transported to the state

Business of Nuclear Safety Analysis Office, Nuclear Technology Test Center

International Nuclear Information System (INIS)

Hayakawa, Masahiko

1981-01-01

The Nuclear Technology Test Center established the Nuclear Safety Analysis Office to execute newly the works concerning nuclear safety analysis in addition to the works related to the proving tests of nuclear machinery and equipments. The regulations for the Nuclear Safety Analysis Office concerning its organization, business and others were specially decided, and it started the business formally in August, 1980. It is a most important subject to secure the safety of nuclear facilities in nuclear fuel cycle as the premise of developing atomic energy. In Japan, the strict regulation of safety is executed by the government at each stage of the installation, construction, operation and maintenance of nuclear facilities, based on the responsibility for the security of installers themselves. The Nuclear Safety Analysis Office was established as the special organ to help the safety examination related to the installation of nuclear power stations and others by the government. It improves and puts in order the safety analysis codes required for the cross checking in the safety examination, and carries out safety analysis calculation. It is operated by the cooperation of the Science and Technology Agency and the Agency of Natural Resources and Energy. The purpose of establishment, the operation and the business of the Nuclear Safety Analysis Office, the plan of improving and putting in order of analysis codes, and the state of the similar organs in foreign countries are described. (Kako, I.)

Optical wireless communication in data centers

Science.gov (United States)

Arnon, Shlomi

2018-01-01

In the last decade data centers have become a crucial element in modern human society. However, to keep pace with internet data rate growth, new technologies supporting data center should develop. Integration of optical wireless communication (OWC) in data centers is one of the proposed technologies as augmented technology to the fiber network. One implementation of the OWC technology is deployment of optical wireless transceiver on top of the existing cable/fiber network as extension to the top of rack (TOR) switch; in this way, a dynamic and flexible network is created. Optical wireless communication could reduce energy consumption, increase the data rate, reduce the communication latency, increase flexibility and scalability, and reduce maintenance time and cost, in comparison to extra fiber network deployment. In this paper we review up to date literature in the field, propose an implementation scheme of OWC network, discuss ways to reduce energy consumption by parallel link communication and report preliminary measurement result of university data center environment.

Suspensions Plasma Spraying of Ceramics with Hybrid Water-Stabilized Plasma Technology

Czech Academy of Sciences Publication Activity Database

Mušálek, Radek; Medřický, Jan; Tesař, T.; Kotlan, Jiří; Pala, Zdeněk; Lukáč, František; Chráska, Tomáš; Curry, N.

2017-01-01

Roč. 26, 1-2 (2017), s. 37-46 ISSN 1059-9630. [ISTC 2016: International Thermal Spray Conference. Shanghai, 10.05.2016-12.05.2016] R&D Projects: GA ČR GA15-12145S Institutional support: RVO:61389021 Keywords : alumina * ceramics * dense * hybrid plasma torch * suspension plasma spraying * water-stabilized plasma * yttria-stabilized zirconia (YSZ) Subject RIV: JK - Corrosion ; Surface Treatment of Materials OBOR OECD: Coating and films Impact factor: 1.488, year: 2016 http://link.springer.com/article/10.1007/s11666-016-0493-6

Persons with Mild or Moderate Alzheimer's Disease Use a Basic Orientation Technology to Travel to Different Rooms within a Day Center

Science.gov (United States)

Lancioni, Giulio E.; Perilli, Viviana; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Bosco, Andrea; De Caro, Maria Fara; Cassano, Germana; Pinto, Katia; Minervini, Mauro

2011-01-01

This study assessed whether three patients with Alzheimer's disease could learn to use a basic orientation technology to reach different rooms within a day center. At each travel instance, the technology provided verbal messages (cues) from the room to reach. For the first two patients, the messages were presented at intervals of about 15 s. For…

Impact of Information Technology, Clinical Resource Constraints, and Patient-Centered Practice Characteristics on Quality of Care

Directory of Open Access Journals (Sweden)

JongDeuk Baek

2015-02-01

Full Text Available Objective: Factors in the practice environment, such as health information technology (IT infrastructure, availability of other clinical resources, and financial incentives, may influence whether practices are able to successfully implement the patient-centered medical home (PCMH model and realize its benefits. This study investigates the impacts of those PCMH-related elements on primary care physicians’ perception of quality of care. Methods: A multiple logistic regression model was estimated using the 2004 to 2005 CTS Physician Survey, a national sample of salaried primary care physicians (n = 1733. Results: The patient-centered practice environment and availability of clinical resources increased physicians’ perceived quality of care. Although IT use for clinical information access did enhance physicians’ ability to provide high quality of care, a similar positive impact of IT use was not found for e-prescribing or the exchange of clinical patient information. Lack of resources was negatively associated with physician perception of quality of care. Conclusion: Since health IT is an important foundation of PCMH, patient-centered practices are more likely to have health IT in place to support care delivery. However, despite its potential to enhance delivery of primary care, simply making health IT available does not necessarily translate into physicians’ perceptions that it enhances the quality of care they provide. It is critical for health-care managers and policy makers to ensure that primary care physicians fully recognize and embrace the use of new technology to improve both the quality of care provided and the patient outcomes.

Case-mix & patients' reports of outcome in Independent Sector Treatment Centres: Comparison with NHS providers

Directory of Open Access Journals (Sweden)

van der Meulen Jan

2008-04-01

Full Text Available Abstract Background There has been considerable concern expressed about the outcomes achieved in Independent Sector Treatment Centres (ISTCs introduced in England since 2003. Our aim was to compare the case-mix and patients' reported outcomes of surgery in ISTCs and in NHS providers. Methods Prospective cohort study of 769 patients treated in six ISTCs and 1895 treated in 20 NHS providers (acute hospitals and treatment centres in England during 2006–07. Participants underwent one of three day surgery procedures (inguinal hernia repair, varicose vein surgery, cataract extraction or hip or knee replacement. Change in patient-reported health status and health related quality of life (measured using a disease-specific and a generic (EQ-5D instrument was assessed either 3-months (day surgery or 6-months (hip/knee after surgery. In addition patient-reported post-operative complications and an overall assessment of success of surgery were collected. Outcome measures were adjusted (using multivariable regression for patient characteristics (disease severity, duration of symptoms, age, sex, socioeconomic status, general health, previous similar surgery, comorbidity. Results Post-operative response rates varied by procedure (73%–88% and were similar for those treated in ISTCs and NHS facilities. Patients treated in ISTCs were healthier, were less likely to have any comorbidity and, for those undergoing cataract surgery or joint replacement, their primary condition was less severe. Those undergoing hernia repair or joint replacement were less likely to have had similar surgery before. When adjustment was made for pre-operative characteristics, patients undergoing cataract surgery or hip replacement in ISTCs achieved a slightly greater improvement in functional status and quality of life than those treated in NHS facilities, while the opposite was true of patients undergoing hernia repair. No significant differences were found for the two other

Calcine Waste Storage at the Idaho Nuclear Technology and Engineering Center

Energy Technology Data Exchange (ETDEWEB)

M. D. Staiger

1999-06-01

A potential option in the program for long-term management of high-level wastes at the Idaho Nuclear Technology and Engineering Center (INTEC), at the Idaho National Engineering and Environmental Laboratory, calls for retrieving calcine waste and converting it to a more stable and less dispersible form. An inventory of calcine produced during the period December 1963 to May 1999 has been prepared based on calciner run, solids storage facilities operating, and miscellaneous operational information, which gives the range of chemical compositions of calcine waste stored at INTEC. Information researched includes calciner startup data, waste solution analyses and volumes calcined, calciner operating schedules, solids storage bin capacities, calcine storage bin distributor systems, and solids storage bin design and temperature monitoring records. Unique information on calcine solids storage facilities design of potential interest to remote retrieval operators is given.

Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Science Mission Directorate Projects at Glenn Research Center for 2015

Science.gov (United States)

Nguyen, Hung D.; Steele, Gynelle C.

2016-01-01

This report is intended to help NASA program and project managers incorporate Glenn ResearchCenter Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR)technologies into NASA Science Mission Directorate (SMD) programs/projects. Other Government and commercial project managers can also find this useful.

The Effects of Information Technology on Library and Documentation Centers: A Review of Social, Structural, Managerial and Functional Aspects

Directory of Open Access Journals (Sweden)

Mesut Kurulgan

2013-11-01

Full Text Available In the context of protecting academic and cultural heritage, the purpose of libraries and information and documentation centers is to research, document, and archive and to transfer to future generations, domestically and internationally, a society ’s culture. This study examines the structural, functional and administrative innovations that have resulted from the implementation of information technology (IT in libraries since the 1990 ’s. The study also mentions how IT can be used in an efficient way in libraries and information and documentation centers.

Academic Medical Centers as digital health catalysts.

Science.gov (United States)

DePasse, Jacqueline W; Chen, Connie E; Sawyer, Aenor; Jethwani, Kamal; Sim, Ida

2014-09-01

Emerging digital technologies offer enormous potential to improve quality, reduce cost, and increase patient-centeredness in healthcare. Academic Medical Centers (AMCs) play a key role in advancing medical care through cutting-edge medical research, yet traditional models for invention, validation and commercialization at AMCs have been designed around biomedical initiatives, and are less well suited for new digital health technologies. Recently, two large bi-coastal Academic Medical Centers, the University of California, San Francisco (UCSF) through the Center for Digital Health Innovation (CDHI) and Partners Healthcare through the Center for Connected Health (CCH) have launched centers focused on digital health innovation. These centers show great promise but are also subject to significant financial, organizational, and visionary challenges. We explore these AMC initiatives, which share the following characteristics: a focus on academic research methodology; integration of digital technology in educational programming; evolving models to support "clinician innovators"; strategic academic-industry collaboration and emergence of novel revenue models. Copyright © 2014 Elsevier Inc. All rights reserved.

How Do You Keep 'Em down on the Farm after They've Seen Technology? The Stone Barns Center for Food and Agriculture

Science.gov (United States)

Donlevy, Jim

2004-01-01

In an age dominated by technology, teachers are challenged as never before to help students understand the deep connections they share with people from earlier times and nowhere is this more dramatically revealed than in basic farm life. This article discusses the Stone Barns Center for Food and Agriculture and describes technology use that…

Annular Electric Discharge as an Initiator of Combustion in Supersonic Flow

Science.gov (United States)

2009-02-01

Flow 5a. CONTRACT NUMBER ISTC Registration No: 3833P 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Kossyi Igor Antonovich...REPORT NUMBER(S) ISTC 07-7012 12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution is unlimited. 13. SUPPLEMENTARY...

Cloud networking understanding cloud-based data center networks

CERN Document Server

Lee, Gary

2014-01-01

Cloud Networking: Understanding Cloud-Based Data Center Networks explains the evolution of established networking technologies into distributed, cloud-based networks. Starting with an overview of cloud technologies, the book explains how cloud data center networks leverage distributed systems for network virtualization, storage networking, and software-defined networking. The author offers insider perspective to key components that make a cloud network possible such as switch fabric technology and data center networking standards. The final chapters look ahead to developments in architectures

FBR Plant Engineering Center annual report 2012

International Nuclear Information System (INIS)

2013-12-01

This annual report shows the last year's R and D activities of currently-reorganized FBR Plant Engineering Center, which was established on April 1, 2009. FBR Safety Technology Center was founded on April 1, 2013 by the consolidation of both the activities of 'former FBR Plant Engineering Center' and a portion of 'FBR Safety Evaluation Unit, Advanced Nuclear System Research and Development Directorate', especially concentrating on safety evaluations and analyses for severe accidents. As for FBR safety technology, it is necessary to continuously make an effort for compliance with new safety regulations in preparation for 'Monju' to restart, for safety enhancement evaluation and for safety technology upgrading. In this context, the new organization was founded in order to reinforce the safety evaluation capability, which will surely and steadily promote FBR safety-technology related activities. As a result, FBR Plant Engineering Center was abolished. This report summarizes the R and D activities at the former FBR Plant Engineering Center, aiming at contributing to the commercialization by using operation experiences and technology development results derived from the actual reactor 'Monju'. The activities are divided into five areas of operation-and-maintenance engineering, sodium engineering, reactor-core-and-fuel engineering, plant engineering, and safety engineering. This annual report is intended for a report of the activities of individual researcher in the center rather than that of the progress of the center as a whole. This will clarify the individual themes, progresses and problems of each researcher, which will, hopefully, facilitate communication with the outside researchers. (author)

A Measurement Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities

Energy Technology Data Exchange (ETDEWEB)

Hendrik Hamann, Levente Klein

2012-06-28

Data center (DC) electricity use is increasing at an annual rate of over 20% and presents a concern for the Information Technology (IT) industry, governments, and the society. A large fraction of the energy use is consumed by the compressor cooling to maintain the recommended operating conditions for IT equipment. The most common way to improve the DC efficiency is achieved by optimally provisioning the cooling power to match the global heat dissipation in the DC. However, at a more granular level, the large range of heat densities of today's IT equipment makes the task of provisioning cooling power optimized to the level of individual computer room air conditioning (CRAC) units much more challenging. Distributed sensing within a DC enables the development of new strategies to improve energy efficiency, such as hot spot elimination through targeted cooling, matching power consumption at rack level with workload schedule, and minimizing power losses. The scope of Measurement and Management Technologies (MMT) is to develop a software tool and the underlying sensing technology to provide critical decision support and control for DC and telecommunication facilities (TF) operations. A key aspect of MMT technology is integration of modeling tools to understand how changes in one operational parameter affect the overall DC response. It is demonstrated that reduced ordered models for DC can generate, in less than 2 seconds computational time, a three dimensional thermal model in a 50 kft{sup 2} DC. This rapid modeling enables real time visualization of the DC conditions and enables 'what if' scenarios simulations to characterize response to 'disturbances'. One such example is thermal zone modeling that matches the cooling power to the heat generated at a local level by identifying DC zones cooled by a specific CRAC. Turning off a CRAC unit can be simulated to understand how the other CRAC utilization changes and how server temperature responds

Public Communication of Science and Technology in Museums and Interactive Centers in MedellÍn (Colombia

Directory of Open Access Journals (Sweden)

Silvia Inés Jiménez-G.

2010-01-01

Full Text Available Following the simple and complex deficit and democratic model approaches, this paper analyses the communication strategies applied in several museums and interactive centers —Parque Explora, Museo Interactivo Empresas Públicas de Medellín, Planetario Jesús Emilio Ramírez and Museo Universitario from the University of Antioquia in the city of Medellín—. We argue that communicating scientific and technological developments at a conjunctural moment —because of the pressure exerted by the demand side to bring knowledge within the reach of the man in the street— involves recognizing science and technology issues should not be conveyed in a language increasingly distanced from layman’s understanding and should allow for citizens’ critical thinking formation face to techno-scientific developments. By analysing the communication approaches mentioned above, we found significant obstacles to be overcome in the communication strategies applied by museum staff in order to come to an understanding of science and technology.

Technology Development and Innovation | Wind | NREL

Science.gov (United States)

Technology Development and Innovation Technology Development and Innovation Technology Development Technology Center (NWTC) supports efforts to reduce bird and bat fatalities at wind energy projects and photo of wind turbines at the National Wind Technology Center. Wildlife technology research and

Bridging the digital divide by increasing computer and cancer literacy: community technology centers for head-start parents and families.

Science.gov (United States)

Salovey, Peter; Williams-Piehota, Pamela; Mowad, Linda; Moret, Marta Elisa; Edlund, Denielle; Andersen, Judith

2009-01-01

This article describes the establishment of two community technology centers affiliated with Head Start early childhood education programs focused especially on Latino and African American parents of children enrolled in Head Start. A 6-hour course concerned with computer and cancer literacy was presented to 120 parents and other community residents who earned a free, refurbished, Internet-ready computer after completing the program. Focus groups provided the basis for designing the structure and content of the course and modifying it during the project period. An outcomes-based assessment comparing program participants with 70 nonparticipants at baseline, immediately after the course ended, and 3 months later suggested that the program increased knowledge about computers and their use, knowledge about cancer and its prevention, and computer use including health information-seeking via the Internet. The creation of community computer technology centers requires the availability of secure space, capacity of a community partner to oversee project implementation, and resources of this partner to ensure sustainability beyond core funding.

Impact of Mobile Dose-Tracking Technology on Medication Distribution at an Academic Medical Center.

Science.gov (United States)

Kelm, Matthew; Campbell, Udobi

2016-05-01

Medication dose-tracking technologies have the potential to improve efficiency and reduce costs associated with re-dispensing doses reported as missing. Data describing this technology and its impact on the medication use process are limited. The purpose of this study is to assess the impact of dose-tracking technology on pharmacy workload and drug expense at an academic, acute care medical center. Dose-tracking technology was implemented in June 2014. Pre-implementation data were collected from February to April 2014. Post-implementation data were collected from July to September 2014. The primary endpoint was the percent of re-dispensed oral syringe and compounded sterile product (CSP) doses within the pre- and post-implementation periods per 1,000 discharges. Secondary endpoints included pharmaceutical expense generated from re-dispensing doses, labor costs, and staff satisfaction with the medication distribution process. We observed an average 6% decrease in re-dispensing of oral syringe and CSP doses from pre- to post-implementation (15,440 vs 14,547 doses; p = .047). However, when values were adjusted per 1,000 discharges, this trend did not reach statistical significance (p = .074). Pharmaceutical expense generated from re-dispensing doses was significantly reduced from pre- to post-implementation ($834,830 vs $746,466 [savings of $88,364]; p = .047). We estimated that $2,563 worth of technician labor was avoided in re-dispensing missing doses. We also saw significant improvement in staff perception of technology assisting in reducing missing doses (p = .0003), as well as improvement in effectiveness of resolving or minimizing missing doses (p = .01). The use of mobile dose-tracking technology demonstrated meaningful reductions in both the number of doses re-dispensed and cost of pharmaceuticals dispensed.

Assessing consumer benefits of selected gas appliance technology center tasks. Topical report, April-December 1992

International Nuclear Information System (INIS)

Smith, T.R.; Bournakis, A.D.; Worek, W.M.; Kalensky, D.C.; Dombrowski, L.P.

1992-12-01

The Gas Appliance Technology Center (GATC) was created in 1983 to assist the gas industry in bringing about a new generation of reasonably priced, advanced gas appliances. The objective of the report is to evaluate consumer benefits of sixteen selected GATC tasks for the time period between 1983 and 1990. Tasks were selected for review based upon their degree of industry impact and how well they represented activities in the four targeted research areas of Space Conditioning, Commercial Appliances, Residential Appliances, and Codes and Standards

PACS strategy for imaging centers.

Science.gov (United States)

Bedel, Victoria; Zdanowicz, Mark

2004-01-01

Picture archiving and communications systems (PACS) have been available in imaging centers for many years, but they often were less functional, were not well integrated into patient information systems, and lacked the network backbone to implement a system. As modalities are replaced and technology improves, the ability and time for an imaging center to acquire, integrate, and utilize PACS has arrived. However, each imaging center must determine why it should invest in PACS. A business plan is the fundamental need. Each imaging center must understand its target market, growth rate, and staffing plans. Additional considerations lie in current and future modality availability, the need for offsite delivery of images and reports, and the potential need for remote transmission of images. These issues must be identified and prioritized. A multidisciplinary team is essential. The most successful PACS implementation begins with complete involvement from all levels. The team should be comprised of people with complementary skills who are committed to a common purpose, set of performance goals, and approach for which they hold themselves mutually accountable. The team must jointly decide on the project's objectives. These objectives fall under 4 categories: clinical, service, financial, and performance. PACS must be considered a tool to help accomplish each objective. The imaging center must determine its top priorities, then translate them into a technology "wish list." The center can then list those pieces of technology that are most important and prioritize them. There are even more considerations for connecting multiple imaging centers. The team must create a comprehensive request for proposal (RFP) and determine the vendors that will receive the document. Once the RFP responses have been received and the vendor has been selected, an effective training plan must be executed. Training plans should be competency-based, ensuring comfort and competency among all staff. Upon

Results of Occupational Monitoring Program in Technologic Navy Center in Sao Paulo

International Nuclear Information System (INIS)

Perez, Clarice F.A.; Bitelli, Ricardo D.; Oliveira, Rodemir

2013-01-01

The CTMSP, Centro Tecnologico da Marinha em Sao Paulo, is a nuclear research Center located in the State of Sao Paulo. CTMSP headquarters is placed at the Campus of the University of Sao Paulo. Most of CTMSP nuclear facilities are at the Centro Experimental Aramar (CEA), located 120 km northwest from the Capital city of Sao Paulo. CTMSP has two major nuclear programs. One is the development of a PWR reactor for naval propulsion, and the other is associated with the front end fuel cycle technology comprising enrichment, conversion and reconversion. These activities require an extensive area monitoring program. This paper presents the results of this program covering the years of 2003 to 2011. The results include surface monitoring, dose rates and uranium concentrations in the air. (author)

Proposal of an Observatory of Trends for Nanotechnology in the Context of Technology Management in an Oil and Gas R&D Center – Case: Nanotechnology

Directory of Open Access Journals (Sweden)

Viviane Masseran Antunes Parreiras

2013-12-01

Full Text Available The paper presents basic concepts on nanotechnology and the use of this in an oil and gas research and development (R&D center, the Research and Development Center Leopoldo Américo Miguez de Mello of Petrobras (CENPES. The aim of this paper is to present a proposal of an observatory of trends in the area of nanotechnology at CENPES, to generate information, such as the state of the art technologies, technological trajectories, movements of competitors and partners, and aspects relating to regulations and incentives for decision making in the technology management process. The model consists of five steps that should occur in a continuous cycle: literature review, expert consultation, analysis of opportunities and threats, timelines or roadmaps, and monitoring. In conclusion, the proposed observatory includes a set of topics (variables, sources, techniques of competitive technical intelligence and technological foresight, systematized in order to support decision making in technology management.

2017 Technology Showcase Presentations | NCI Technology Transfer Center | TTC

Science.gov (United States)

Presentations from the 2017 Technology Showcase by NIH Intramural Research Program scientists held at Frederick National Laboratories for Cancer Research on June 7, 2017. | [google6f4cd5334ac394ab.html

Use of qualitative methods and user-centered design to develop customized health information technology tools within federally qualified health centers to keep children insured.

Science.gov (United States)

DeVoe, Jennifer; Angier, Heather; Likumahuwa, Sonja; Hall, Jennifer; Nelson, Christine; Dickerson, Kay; Keller, Sara; Burdick, Tim; Cohen, Deborah

2014-01-01

Lack of health insurance negatively impacts children's health. Despite federal initiatives to expand children's coverage and accelerate state outreach efforts, millions of US children remain uninsured or experience frequent gaps in coverage. Most current efforts to enroll and retain eligible children in public insurance programs take place outside of the health care system. This study is a partnership between patients' families, medical informaticists, federally qualified health center (FQHC) staff, and researchers to build and test information technology tools to help FQHCs reach uninsured children and those at risk for losing coverage.

An Analysis of Information Technology Adoption by IRBs of Large Academic Medical Centers in the United States.

Science.gov (United States)

He, Shan; Botkin, Jeffrey R; Hurdle, John F

2015-02-01

The clinical research landscape has changed dramatically in recent years in terms of both volume and complexity. This poses new challenges for Institutional Review Boards' (IRBs) review efficiency and quality, especially at large academic medical centers. This article discusses the technical facets of IRB modernization. We analyzed the information technology used by IRBs in large academic institutions across the United States. We found that large academic medical centers have a high electronic IRB adoption rate; however, the capabilities of electronic IRB systems vary greatly. We discuss potential use-cases of a fully exploited electronic IRB system that promise to streamline the clinical research work flow. The key to that approach utilizes a structured and standardized information model for the IRB application. © The Author(s) 2014.

Data_Flood: Helping the Navy Address the Rising Tide of Sensor Information

Science.gov (United States)

2014-01-01

NSA Big Graph Experiment,” presentation at the Carnegie Mellon University SDI/ ISTC Seminar, Pitts- burgh, Pa., May 20, 2013; Jeremy Kepner, Christian...Experiment,” presentation at the Carnegie Mellon University SDI/ ISTC Seminar, Pittsburgh, Pa., May 20, 2013. As of July 9, 2013: http://www.pdl.cmu.edu

Modeling of High-Velocity Flows in ITAM Impulse Facilities

Science.gov (United States)

2010-04-01

were performed within the framework of the ISTC project Nos. 2109 and 3550 with direct participation of Dr. Jean-Claude Paulat [17, 18]. The ARES...the flow character in the boundary layer, namely, caused the laminar flow transition to the turbulent one. This work was sponsored by ISTC within

Study of Factors Determining the Gain Characteristics of DOIL Active Medium

Science.gov (United States)

2009-04-17

2009 2. REPORT TYPE Final Report 3. DATES COVERED (From – To) 01-Mar-08 - 17-Apr-09 5a. CONTRACT NUMBER ISTC Registration No: 3835 5b...MONITOR’S REPORT NUMBER(S) ISTC 06-7006 12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution is unlimited. 13

Partnering Events | NCI Technology Transfer Center | TTC

Science.gov (United States)

Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

Ames Research Center Research and Technology 2000

Science.gov (United States)

2002-01-01

This report highlights the challenging work accomplished during fiscal year 2000 by Ames research scientists,engineers, and technologists. It discusses research and technologies that enable the Information Age, that expand the frontiers of knowledge for aeronautics and space, and that help to maintain U.S. leadership in aeronautics and space research and technology development. The accomplishments are grouped into four categories based on four of NASA's Strategic Enterprises: Aerospace Technology, Space Science, Biological and Physical Research, and Earth Science. The primary purpose of this report is to communicate knowledge-to inform our stakeholders, customer, and partners, and the people of the United States about the scope and diversity of Ames' mission,the nature of Ames' research and technolog) activities,and the stimulating challenges ahead. The accomplishments cited illustrate the contributions that Ames is willing to improve the quality of life for our citizens and the economic position of the United States in the world marketplace.

Integration of Cloud Technologies for Data Stewardship at the NOAA National Centers for Environmental Information (NCEI)

Science.gov (United States)

Casey, K. S.; Hausman, S. A.

2016-02-01

In the last year, the NOAA National Oceanographic Data Center (NODC) and its siblings, the National Climatic Data Center and National Geophysical Data Center, were merged into one organization, the NOAA National Centers for Environmental Information (NCEI). Combining its expertise under one management has helped NCEI accelerate its efforts to embrace and integrate private, public, and hybrid cloud environments into its range of data stewardship services. These services span a range of tiers, from basic, long-term preservation and access, through enhanced access and scientific quality control, to authoritative product development and international-level services. Throughout these tiers of stewardship, partnerships and pilot projects have been launched to identify technological and policy-oriented challenges, to establish solutions to these problems, and to highlight success stories for emulation during operational integration of the cloud into NCEI's data stewardship activities. Some of these pilot activities including data storage, access, and reprocessing in Amazon Web Services, the OneStop data discovery and access framework project, and a set of Cooperative Research and Development Agreements under the Big Data Project with Amazon, Google, IBM, Microsoft, and the Open Cloud Consortium. Progress in these efforts will be highlighted along with a future vision of how NCEI could leverage hybrid cloud deployments and federated systems across NOAA to enable effective data stewardship for its oceanographic, atmospheric, climatic, and geophysical Big Data.

Bolivia. The new nuclear research center in El Alto

International Nuclear Information System (INIS)

Nogarin, Mauro

2016-01-01

Research reactors in Latin America have become a priority in public policy in the last decade. Bolivia wants to become the 8th country to implement peaceful nuclear technology in this area with the new Center for Research and Development in the Nuclear Technology. The Center will be the most advanced in Latin America. It will provide for a wide use of radiation technologies in agriculture, medicine, and industry. After several negotiations Bolivia and the Russian Federation signed the Intergovernmental Agreement on cooperation in the peaceful use of atomic energy and the construction of the Nuclear Research and Technology Center.

Bolivia. The new nuclear research center in El Alto

Energy Technology Data Exchange (ETDEWEB)

Nogarin, Mauro

2016-05-15

Research reactors in Latin America have become a priority in public policy in the last decade. Bolivia wants to become the 8th country to implement peaceful nuclear technology in this area with the new Center for Research and Development in the Nuclear Technology. The Center will be the most advanced in Latin America. It will provide for a wide use of radiation technologies in agriculture, medicine, and industry. After several negotiations Bolivia and the Russian Federation signed the Intergovernmental Agreement on cooperation in the peaceful use of atomic energy and the construction of the Nuclear Research and Technology Center.

NATO-ASI on ’Sensors for Environment, Health and Security: Advanced Materials and Technologies’ Held in Limoges, France 16-27 Septermber 2007.

Science.gov (United States)

2008-09-18

Contact author: gaskov@inorg.chem.msu.ru The nanostructured semiconductor oxides: ZnO , SnO2, WO3, and In2O3 are widely used as sensitive...35 min) Authors thanks ISTC for financial support (project 3245) 33 ELECTROCHEMICAL BIOSENSORS Arkady A. KARYAKIN Electrochemistry ...but also pharmaceutical market will be presented. L9 34 BIOELECTROCATALYSIS Arkady A. KARYAKIN Electrochemistry methods lab., Analytical

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-09-30

The Princeton Plasma Physics Laboratory (PPPL) demonstration of the diamond wire cutting technology on the surrogate of the Tokamak Fusion Test Reactor (TFTR), Figure 1, was performed from August 23-September 3, 1999. The plated diamond wire, Figure 2, was successful in cutting through all components of the TFTR surrogate including stainless steel, inconel and graphite. The demonstration tested three different void fill materials (mortar with sand, Rheocell-15, and foam) and three cooling systems (water, air, and liquid nitrogen). The optimum combination was determined to be the use of the low-density concrete void fill, Rheocell-15 with an average density of 52 lbs/ft{sup 3}, using a water coolant. However, the liquid nitrogen performed better than expected with only minor problems and was considered to be a successful demonstration of the Bluegrass Concrete Cutting, Inc. proprietary liquid-nitrogen coolant system. Data from the demonstration is being calculated and a summary of the technology demonstration will be included in the October monthly report. An ITSR will be written comparing the diamond wire saw to the plasma arc (baseline) technology. The MTR Chemical Protective Suit, a proprietary new suit from Kimberly Clark, was evaluated from 8/9/99 to 8/12/99 at Beaver, WV. This particular suit was tested on subjects performing three different tasks: climbing through a horizontal confined space, vertical confined space (pit), and loading and unloading material using a wheel barrow. Multiple test subjects performed each task for 20 minutes each. Performance of the innovative suit was compared to two commonly used types of protective clothing. Vital statistics, including body temperature and heart rate, were continuously monitored and recorded by an authorized physician. A summary of the demonstration will be included in the October monthly report. Along with the MTR Chemical Protective Suit, the VitalSense{trademark} Telemetric Monitoring System from Mini Mitter

About TTC | NCI Technology Transfer Center | TTC

Science.gov (United States)

The TTC facilitates licensing and co-development partnerships between biomedical industry, academia, and government agencies and the research laboratories of the NCI and nine other institutes and centers of NIH.

C2 Domain Ontology within Our Lifetime

Science.gov (United States)

2009-06-01

25] Masolo, C., et al: The WonderWeb Library of Foundational Ontologies Prelimary Report, WonderWeb Deliverable D17, ISTC -CNR, May 2003. [26...www.ifomis.org/bfo/BFO  [25] Masolo, C., et al: The WonderWeb Library of Foundational Ontologies Prelimary Report, WonderWeb Deliverable D17, ISTC -CNR

The Use of Assessment Center Technology for the Prevention and Reduction of Professional Burnout

Directory of Open Access Journals (Sweden)

Stalnova I.A.,

2014-08-01

Full Text Available Dynamism of professional activity, increasing workload and working time shortage, high social responsibility for results and other factors increase the probability of formation of burnout in government employees. This actualizes the search for new forms and methods of professional qualification of government employees based on an assessment of their psychological qualities. We discuss the problem of professional and personal burnout in Rosreestr employees, reveal the symptoms of this syndrome. As a tool for preventing and reducing the negative impact of professional deformation in Rosreestr workers, we propose the use of assessment center technology successfully tested in the international practice and requiring adaptation to Russian realities.

Development of Technological Profiles for Transfer of Energy- and Resource Saving Technologies

Directory of Open Access Journals (Sweden)

Lysenko, V.S.

2015-01-01

Full Text Available The article deals with the methodological foundations for the development of technological profiles for «System of Transfer of Energy- and Resource Saving Technologies». It is determined that a compliance with the methodology and standards of the European network «Relay Centers» (Innovation Relay Centers — IRC network, since 2008 — EEN, the Russian Technology Transfer Network RTTN and Uk rainian Technology Transfer Network UTTN is the main pri nciple of the development process of technological requests and offers.

Heart Information Center

Science.gov (United States)

... Rounds Seminar Series & Daily Conferences Fellowships and Residencies School of Perfusion Technology Education Resources Library & Learning Resource Center CME Resources THI Journal THI Cardiac Society Register for the Cardiac Society ...

REVIEW OF INTERNATIONAL PROJECTS IN А FIELD OF HUMAN MICROBIAL ECOLOGY AND CONSTRUCTION OF PROBIOTICS

Directory of Open Access Journals (Sweden)

S. A. Starovoitova

2013-06-01

Full Text Available Modern huge and world-wide known projects concerning studying of human microbial ecology and construction of probiotics, particularly: Society for Microbial Ecology and Disease, Probiotics & Health Targeted Initiative of International Science and Technology Center (TI PROBIO ISTC, Human Microbiome Project of National Institutes of Health, MetaHIT Project (Metagenomics of the Human Intestinal Tract of European Commission, Human Metabolome Project of Canadian University of Alberta and some more else were characterized in the article. Brief historical information and reference to official sites of every discussed project were given. Main goals and tasks of every project were described. Short characteristic of discussed projects and also modern accessible results of researches were given. Importance of every examined project for widening scientific knowledge in the field of human microbial ecology and also for improvement and/or for construction of modern effective probiotics on basis of human normal intestinal microflora were paid attention. Close interaction of scientific data received by realization of every discussed project was shown.

Activities of the NEDO information center

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

Under the situation where items of information related to energy and industrial technologies (including environmental technologies) are diversified and internationalized, the NEDO Information Center opens its book and data rooms, performs database service and information exchange activities with other countries, and issues information journals. These activities are intended to respond accurately and quickly to users` information needs. This paper reports the result of operations during fiscal 1994. Retained and provided for public reading at the Center are 2,200 reports on results of research and development works having been carried out by NEDO, 3,800 books and data published inside and outside Japan mainly on new energies, and 190 kinds of periodical publications. The first nationwide geothermal result charts are also reproduced and sold. Technological literature and information prepared by IEA which have been obtained based on the energy technological data exchange treaty and the implementation treaty on establishment of IEA coal research have been recorded as the NEDO-EDBS and offered on line. This paper also introduces the optical databases. The agreement on the IEA Information Centers for the Analysis and Dissemination of Demonstrated Energy Technologies (CADDET) is also available. Descriptions are given also on activities of the Greenhouse Gas Technology Information Exchange (GREENTIE).

Russia skyshine experiment analysis

Energy Technology Data Exchange (ETDEWEB)

Tsubosaka, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kawabe, Toshiaki [The Japan Research Institute, Ltd., Tokyo (Japan); Ueki, Kohtaro [National Maritime Research Institute, Tokyo (Japan)

2001-01-01

Experimental studies of neutron and gamma-radiation skyshine at nuclear reactor are proceeding in cooperation with Russia, Kazakhstan and Japan as a project of international science technology center (ISTC). Fast neutron streaming from the vertical experimental hole of IVG.1M reactor which has a cylindrical core are analyzed by a monte carlo n-particle transport code (MCNP) with variance reduction methods, in which a weight window method and a cell importance method can be selected. Calculation results on radial distribution of fast neutron flux at 100 cm above the reactor is compared with the experimental values. The calculated values of neutron flux by using the cell importance method, however, is very different from the experimental values at close distance of 10 cm from the center. Skyshine analysis of neutron radiation streaming from the reactor are also carried out by the equivalent source model in which a point source and the detectors are located at 10 cm and 1 m above the ground, respectively. The calculated values of total neutron flux distribution are very close to the experimental values. The effects of the air composition on neutron flux calculation are also investigated. (M. Suetake)

Idaho Nuclear Technology and Engineering Center (INTEC) (formerly ICPP) ash reutilization study

Energy Technology Data Exchange (ETDEWEB)

Langenwalter, T.; Pettet, M.; Ochoa, R.; Jensen, S.

1998-05-01

Since 1984, the coal-fired plant at the Idaho Nuclear Technology and Engineering Center (INTEC, formerly Idaho Chemical Processing Plant) has been generating fly ash at a rate of approximately 1,000 tons per year. This ash is hydrated and placed in an ash bury pit near the coal-fired plant. The existing ash bury pit will be full in less than 1 year at its present rate of use. A conceptual design to build a new ash bury pit was completed, and the new pit is estimated to cost $1.7 million. This report evaluates ash reutilization alternatives that propose to eliminate this waste stream and save the $1.7 million required to build a new pit. The alternatives include using ash for landfill day cover, concrete admixture, flowable fill, soil stabilization, waste remediation, and carbon recovery technology. Both physical and chemical testing, under the guidance of the American Society for Testing and Materials, have been performed on ash from the existing pit and from different steps within the facility`s processes. The test results have been evaluated, compared to commercial ash, and are discussed as they relate to reutilization alternatives. This study recommends that the ash be used in flowable fill concrete for Deactivation and Demolition work at the Idaho National Engineering and Environmental Laboratory.

Idaho Nuclear Technology and Engineering Center (INTEC) (formerly ICPP) ash reutilization study

International Nuclear Information System (INIS)

Langenwalter, T.; Pettet, M.; Ochoa, R.; Jensen, S.

1998-05-01

Since 1984, the coal-fired plant at the Idaho Nuclear Technology and Engineering Center (INTEC, formerly Idaho Chemical Processing Plant) has been generating fly ash at a rate of approximately 1,000 tons per year. This ash is hydrated and placed in an ash bury pit near the coal-fired plant. The existing ash bury pit will be full in less than 1 year at its present rate of use. A conceptual design to build a new ash bury pit was completed, and the new pit is estimated to cost $1.7 million. This report evaluates ash reutilization alternatives that propose to eliminate this waste stream and save the $1.7 million required to build a new pit. The alternatives include using ash for landfill day cover, concrete admixture, flowable fill, soil stabilization, waste remediation, and carbon recovery technology. Both physical and chemical testing, under the guidance of the American Society for Testing and Materials, have been performed on ash from the existing pit and from different steps within the facility's processes. The test results have been evaluated, compared to commercial ash, and are discussed as they relate to reutilization alternatives. This study recommends that the ash be used in flowable fill concrete for Deactivation and Demolition work at the Idaho National Engineering and Environmental Laboratory

Carolinas Energy Career Center

Energy Technology Data Exchange (ETDEWEB)

Classens, Anver; Hooper, Dick; Johnson, Bruce

2013-03-31

Central Piedmont Community College (CPCC), located in Charlotte, North Carolina, established the Carolinas Energy Career Center (Center) - a comprehensive training entity to meet the dynamic needs of the Charlotte region's energy workforce. The Center provides training for high-demand careers in both conventional energy (fossil) and renewable energy (nuclear and solar technologies/energy efficiency). CPCC completed four tasks that will position the Center as a leading resource for energy career training in the Southeast: • Development and Pilot of a New Advanced Welding Curriculum, • Program Enhancement of Non-Destructive Examination (NDE) Technology, • Student Support through implementation of a model targeted toward Energy and STEM Careers to support student learning, • Project Management and Reporting. As a result of DOE funding support, CPCC achieved the following outcomes: • Increased capacity to serve and train students in emerging energy industry careers; • Developed new courses and curricula to support emerging energy industry careers; • Established new training/laboratory resources; • Generated a pool of highly qualified, technically skilled workers to support the growing energy industry sector.

External radiation levels in installations of nuclear technology center

International Nuclear Information System (INIS)

Maletta, Paulo Guilherme M.; Filipetto, Joao; Wakabayashi, Tetsuaki; Silva, Teogenes A. da

2005-01-01

The radiological protection is a basic activity of nuclear technology center so that can carry through its activities with security, having to be planned and executed with total effectiveness. One of the basic tools of the radiological protection is the adoption of monitoring programs, that have as objective generality to evaluate the radiological conditions of the workstation and to assure that these conditions are acceptable safe for the displayed individuals, either workers or members of the public, as established in the basic norms of radiological protection. The Centro de Desenvolvimento da Tecnologia Nuclear - CDTN, first institution in Brazil, created in 1952 to entirely dedicate the related works to the nuclear area, to own 39 building, of which they are kept the Triga Reactor, Irradiation Gamma Laboratory, Reject Laboratory, Calibration Dosemeters Laboratory and others. In such installations, radioactive materials are produced, handled, processed and stored, being necessary the levels of external radiation ambient monitoring. As part of the radioprotection plan, monitoring 63 points on strategically located in the external areas to the building of CDTN, using characterized and calibrated thermoluminescence dosemeters. This work describes the dose distribution of the points, the doses evaluation procedure and the 4 results carried through between 2001 and 2004. The data demonstrate the attendance to the level of security established in the basic norm, what it contributed for the operation licensing of to the IBAMA. (author)

Theoretical study of inverted sandwich type complexes of 4d transition metal elements: interesting similarities to and differences from 3d transition metal complexes.

Science.gov (United States)

Kurokawa, Yusaku I; Nakao, Yoshihide; Sakaki, Shigeyoshi

2012-03-08

Inverted sandwich type complexes (ISTCs) of 4d metals, (μ-η(6):η(6)-C(6)H(6))[M(DDP)](2) (DDPH = 2-{(2,6-diisopropylphenyl)amino}-4-{(2,6-diisopropylphenyl)imino}pent-2-ene; M = Y, Zr, Nb, Mo, and Tc), were investigated with density functional theory (DFT) and MRMP2 methods, where a model ligand AIP (AIPH = (Z)-1-amino-3-imino-prop-1-ene) was mainly employed. When going to Nb (group V) from Y (group III) in the periodic table, the spin multiplicity of the ground state increases in the order singlet, triplet, and quintet for M = Y, Zr, and Nb, respectively, like 3d ISTCs reported recently. This is interpreted with orbital diagram and number of d electrons. However, the spin multiplicity decreases to either singlet or triplet in ISTC of Mo (group VI) and to triplet in ISTC of Tc (group VII), where MRMP2 method is employed because the DFT method is not useful here. These spin multiplicities are much lower than the septet of ISTC of Cr and the nonet of that of Mn. When going from 3d to 4d, the position providing the maximum spin multiplicity shifts to group V from group VII. These differences arise from the size of the 4d orbital. Because of the larger size of the 4d orbital, the energy splitting between two d(δ) orbitals of M(AIP) and that between the d(δ) and d(π) orbitals are larger in the 4d complex than in the 3d complex. Thus, when occupation on the d(δ) orbital starts, the low spin state becomes ground state, which occurs at group VI. Hence, the ISTC of Nb (group V) exhibits the maximum spin multiplicity.

User-centered Technologies For Blind Children

OpenAIRE

Jaime Sánchez

2008-01-01

The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathe...

Integrating heterogeneous healthcare call centers.

Science.gov (United States)

Peschel, K M; Reed, W C; Salter, K

1998-01-01

In a relatively short period, OHS has absorbed multiple call centers supporting different LOBs from various acquisitions, functioning with diverse standards, processes, and technologies. However, customer and employee satisfaction is predicated on OHS's ability to thoroughly integrate these heterogeneous call centers. The integration was initiated and has successfully progressed through a balanced program of focused leadership and a defined strategy which includes site consolidation, sound performance management philosophies, and enabling technology. Benefits have already been achieved with even more substantive ones to occur as the integration continues to evolve.

Structural Integrity Program for the Calcined Solids Storage Facilities at the Idaho Nuclear Technology and Engineering Center

International Nuclear Information System (INIS)

Bryant, J.W.; Nenni, J.A.

2003-01-01

This report documents the activities of the structural integrity program at the Idaho Nuclear Technology and Engineering Center relevant to the high-level waste Calcined Solids Storage Facilities and associated equipment, as required by DOE M 435.1-1, ''Radioactive Waste Management Manual.'' Based on the evaluation documented in this report, the Calcined Solids Storage Facilities are not leaking and are structurally sound for continued service. Recommendations are provided for continued monitoring of the Calcined Solids Storage Facilities

Structural Integrity Program for the Calcined Solids Storage Facilities at the Idaho Nuclear Technology and Engineering Center

International Nuclear Information System (INIS)

Jeffrey Bryant

2008-01-01

This report documents the activities of the structural integrity program at the Idaho Nuclear Technology and Engineering Center relevant to the high-level waste Calcined Solids Storage Facilities and associated equipment, as required by DOE M 435.1-1, 'Radioactive Waste Management Manual'. Based on the evaluation documented in this report, the Calcined Solids Storage Facilities are not leaking and are structurally sound for continued service. Recommendations are provided for continued monitoring of the Calcined Solids Storage Facilities

Technology Development for Hydrogen Propellant Storage and Transfer at the Kennedy Space Center (KSC)

Science.gov (United States)

Youngquist, Robert; Starr, Stanley; Krenn, Angela; Captain, Janine; Williams, Martha

2016-01-01

The National Aeronautics and Space Administration (NASA) is a major user of liquid hydrogen. In particular, NASA's John F. Kennedy (KSC) Space Center has operated facilities for handling and storing very large quantities of liquid hydrogen (LH2) since the early 1960s. Safe operations pose unique challenges and as a result NASA has invested in technology development to improve operational efficiency and safety. This paper reviews recent innovations including methods of leak and fire detection and aspects of large storage tank health and integrity. We also discuss the use of liquid hydrogen in space and issues we are addressing to ensure safe and efficient operations should hydrogen be used as a propellant derived from in-situ volatiles.

Electrolysis activities at FCH Test Center

DEFF Research Database (Denmark)

Ravn Nielsen, Eva; Nygaard, Frederik Berg

FCH Test Center for fuel cell and hydrogen technologies was established in 2010 at Risø DTU in Denmark. Today, the test center is part of DTU Energy Conversion. The center gives industry access to advanced testing and demonstration of components and systems. A number of national projects and EU...... projects regarding water electrolysis involve FCH Test Center as a partner. This presentation gives an overview of the activities....

Illinois Accelerator Research Center

Science.gov (United States)

Kroc, Thomas K.; Cooper, Charlie A.

The Illinois Accelerator Research Center (IARC) hosts a new accelerator development program at Fermi National Accelerator Laboratory. IARC provides access to Fermi's state-of-the-art facilities and technologies for research, development and industrialization of particle accelerator technology. In addition to facilitating access to available existing Fermi infrastructure, the IARC Campus has a dedicated 36,000 ft2 Heavy Assembly Building (HAB) with all the infrastructure needed to develop, commission and operate new accelerators. Connected to the HAB is a 47,000 ft2 Office, Technology and Engineering (OTE) building, paid for by the state, that has office, meeting, and light technical space. The OTE building, which contains the Accelerator Physics Center, and nearby Accelerator and Technical divisions provide IARC collaborators with unique access to world class expertise in a wide array of accelerator technologies. At IARC scientists and engineers from Fermilab and academia work side by side with industrial partners to develop breakthroughs in accelerator science and translate them into applications for the nation's health, wealth and security.

Informing Science (IS and Science and Technology Studies (STS: The University as Decision Center (DC for Teaching Interdisciplinary Research

Directory of Open Access Journals (Sweden)

Teresa Castelao-Lawless

2001-01-01

Full Text Available Students of history and philosophy of science courses at my University are either naïve robust realists or naïve relativists in relation to science and technology. The first group absorbs from culture stereotypical conceptions, such as the value-free character of the scientific method, that science and technology are impervious to history or ideology, and that science and religion are always at odds. The second believes science and technology were selected arbitrarily by ideologues to have privileged world views of reality to the detriment of other interpretations. These deterministic outlooks must be challenged to make students aware of the social importance of their future roles, be they as scientists and engineers or as science and technology policy decision makers. The University as Decision Center (DC not only reproduces the social by teaching standard solutions to well-defined problems but also provides information regarding conflict resolution and the epistemological, individual, historical, social, and political mechanisms that help create new science and technology. Interdisciplinary research prepares students for roles that require science and technology literacy, but raises methodological issues in the context of the classroom as it increases uncertainty with respect to apparently self-evident beliefs about scientific and technological practices.

Clean Energy Solutions Center Services (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-04-01

The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

Research on auto-calibration technology of the image plane's center of 360-degree and all round looking camera

Science.gov (United States)

Zhang, Shaojun; Xu, Xiping

2015-10-01

The 360-degree and all round looking camera, as its characteristics of suitable for automatic analysis and judgment on the ambient environment of the carrier by image recognition algorithm, is usually applied to opto-electronic radar of robots and smart cars. In order to ensure the stability and consistency of image processing results of mass production, it is necessary to make sure the centers of image planes of different cameras are coincident, which requires to calibrate the position of the image plane's center. The traditional mechanical calibration method and electronic adjusting mode of inputting the offsets manually, both exist the problem of relying on human eyes, inefficiency and large range of error distribution. In this paper, an approach of auto- calibration of the image plane of this camera is presented. The imaging of the 360-degree and all round looking camera is a ring-shaped image consisting of two concentric circles, the center of the image is a smaller circle and the outside is a bigger circle. The realization of the technology is just to exploit the above characteristics. Recognizing the two circles through HOUGH TRANSFORM algorithm and calculating the center position, we can get the accurate center of image, that the deviation of the central location of the optic axis and image sensor. The program will set up the image sensor chip through I2C bus automatically, we can adjusting the center of the image plane automatically and accurately. The technique has been applied to practice, promotes productivity and guarantees the consistent quality of products.

An Analysis of Programmatic Variables Relating to the Pass Rates on the Licensure Examination by Practical Nurses in Tennessee Technology Centers

Science.gov (United States)

Simpson, Janis Lee

2013-01-01

The purpose of this quantitative research study was to determine the degree to which Licensed Practical Nursing programmatic variables positively correlate with select Tennessee Technology Center institution pass rates on the licensure examination--NCLEX-PNRTM. This study investigated the relationship between the dependent variable of NCLEX-PNRTM…

International standards for tuberculosis care: Relevance and implications for laboratory professionals

Directory of Open Access Journals (Sweden)

Pai M

2007-01-01

Full Text Available On World Tuberculosis (TB Day 2006, the International Standards for Tuberculosis Care (ISTC was officially released and widely endorsed by several agencies and organizations. The ISTC release was the culmination of a year long global effort to develop and set internationally acceptable, evidence-based standards for tuberculosis care. The ISTC describes a widely endorsed level of care that all practitioners, public and private, should seek to achieve in managing individuals who have or are suspected of having, TB and is intended to facilitate the effective engagement of all healthcare providers in delivering high quality care for patients of all ages, including those with smear-positive, smear-negative and extra-pulmonary TB, TB caused by drug-resistant Mycobacterium tuberculosis and TB/HIV coinfection. In this article, we present the ISTC, with a special focus on the diagnostic standards and describe their implications and relevance for laboratory professionals in India and worldwide. Laboratory professionals play a critical role in ensuring that all the standards are actually met by providing high quality laboratory services for smear microscopy, culture and drug susceptibility testing and other services such as testing for HIV infection. In fact, if the ISTC is widely followed, it can be expected that there will be a greater need and demand for quality assured laboratory services and this will have obvious implications for all laboratories in terms of work load, requirement for resources and trained personnel and organization of quality assurance systems.

User-centered design

International Nuclear Information System (INIS)

Baik, Joo Hyun; Kim, Hyeong Heon

2008-01-01

The simplification philosophy, as an example, that both of EPRI-URD and EUR emphasize is treated mostly for the cost reduction of the nuclear power plants, but not for the simplification of the structure of user's tasks, which is one of the principles of user-centered design. A user-centered design is a philosophy based on the needs and interests of the user, with an emphasis on making products usable and understandable. However, the nuclear power plants offered these days by which the predominant reactor vendors are hardly user-centered but still designer-centered or technology-centered in viewpoint of fulfilling user requirements. The main goal of user-centered design is that user requirements are elicited correctly, reflected properly into the system requirements, and verified thoroughly by the tests. Starting from the user requirements throughout to the final test, each requirement should be traceable. That's why requirement traceability is a key to the user-centered design, and main theme of a requirement management program, which is suggested to be added into EPRI-URD and EUR in the section of Design Process. (author)

Bessines: Rebirth of a technological excellence center

International Nuclear Information System (INIS)

2014-06-01

Areva's mining activity is rooted in the Limousin region of central France. For over 65 years, Bessines-sur-Gartempe has been closely involved with global energy and industrial issues. Geologists came here first as explorers, followed by miners and chemical engineers. This is the heritage on which Areva is drawing to help satisfy the steadily growing demand for energy. The SEPA's (Service d'etudes, de Procedes et Analyses) role is to develop new ways to process and use mineral ores. A world renowned R and D center, modernizing its research facilities is a key part of the program to revitalize the Bessines site. Between 1947 and 2001, close to 250 mining sites were exploited in France producing 76,000 tons of uranium. The Areva group (through the CEA and COGEMA) operated 55 % of these sites, all of which have been reclaimed today. UREKA is an educational center created by Areva to inform the public about uranium mining and French know-how in this field. This museum is unique in the world of mining. Depleted uranium is a byproduct of the uranium enrichment process. It harbors real energy potential that Areva intends to tap in the future. The effectiveness of lead-212 in targeting and destroying cancer cells was demonstrated several years ago. The Geosciences Center in made of four entities spread over 4,000 m 2 , regrouping the whole of Areva's mining knowledge and history. The wealth of mineralogical, petrographic and documentary data found there has been accumulated over more than 60 years of exploration and mining

Lower Savannah aging, disability & transportation resource center : regional travel management and coordination center (TMCC) model and demonstration project.

Science.gov (United States)

2014-10-01

This report details the deployed technology and implementation experiences of the Lower Savannah Aging, Disability & Transportation : Resource Center in Aiken, South Carolina, which served as the regional Travel Management and Coordination Center (TM...

A Qualitative Study of the Treatment Improvement Protocols (TIPs): An Assessment of the Use of TIPs by Individuals Affiliated with the Addiction Technology Transfer Centers (ATTCs).

Science.gov (United States)

Hayashi, Susan W.; Suzuki, Marcia; Hubbard, Susan M.; Huang, Judy Y.; Cobb, Anita M.

2003-01-01

Evaluated the Addiction Technology Transfer Centers (ATTCs) of the Center for Substance Abuse Treatment (CSAT) as a means of diffusion of innovations, focusing on use of the Treatment Improvement Protocols (TIPs). Qualitative studies at 6 ATTCs that included 57 interviews show that the CSAT is at the forefront of providing resources to the…

Computational fluid dynamics research at the United Technologies Research Center requiring supercomputers

Science.gov (United States)

Landgrebe, Anton J.

1987-01-01

An overview of research activities at the United Technologies Research Center (UTRC) in the area of Computational Fluid Dynamics (CFD) is presented. The requirement and use of various levels of computers, including supercomputers, for the CFD activities is described. Examples of CFD directed toward applications to helicopters, turbomachinery, heat exchangers, and the National Aerospace Plane are included. Helicopter rotor codes for the prediction of rotor and fuselage flow fields and airloads were developed with emphasis on rotor wake modeling. Airflow and airload predictions and comparisons with experimental data are presented. Examples are presented of recent parabolized Navier-Stokes and full Navier-Stokes solutions for hypersonic shock-wave/boundary layer interaction, and hydrogen/air supersonic combustion. In addition, other examples of CFD efforts in turbomachinery Navier-Stokes methodology and separated flow modeling are presented. A brief discussion of the 3-tier scientific computing environment is also presented, in which the researcher has access to workstations, mid-size computers, and supercomputers.

Recent Efforts in Communications Research and Technology at the Glenn Research Center in Support of NASA's Mission

Science.gov (United States)

Miranda, Felix A.

2015-01-01

As it has done in the past, NASA is currently engaged in furthering the frontiers of space and planetary exploration. The effectiveness in gathering the desired science data in the amount and quality required to perform this pioneering work relies heavily on the communications capabilities of the spacecraft and space platforms being considered to enable future missions. Accordingly, the continuous improvement and development of radiofrequency and optical communications systems are fundamental to prevent communications to become the limiting factor for space explorations. This presentation will discuss some of the research and technology development efforts currently underway at the NASA Glenn Research Center in the radio frequency (RF) and Optical Communications. Examples of work conducted in-house and also in collaboration with academia, industry, and other government agencies (OGA) in areas such as antenna technology, power amplifiers, radio frequency (RF) wave propagation through Earths atmosphere, ultra-sensitive receivers, thin films ferroelectric-based tunable components, among others, will be presented. In addition, the role of these and other related RF technologies in enabling the NASA next generation space communications architecture will be also discussed.

The development and technology transfer of software engineering technology at NASA. Johnson Space Center

Science.gov (United States)

Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

1992-01-01

The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

Energy Technology Data Exchange (ETDEWEB)

1988-09-01

This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

Annual Report (No. 1) of Center for Advanced Research of Energy Technology, Hokkaido University; Hokkaido Daigaku energy sentan kogaku kenkyu center nenpo dai 1 go

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The activities of the Center cover basic researches into chemistry, physics, and materials necessary for the development of technologies relating to high-efficiency conversion of coal-centered fossil fuel resources and to the security of new energy sources. Studies under way in the field of carbonaceous resources conversion reaction involve the process of transfer of heat and substance in the coal conversion reaction, behavior of short-life intermediate products, and the structure and physical properties of coal as a molecular solid or macromolecule. Studies being conducted in the field of carbonaceous resources assessment include the search for and development of high-efficiency catalysts for coal conversion reaction systems, elucidation of physical and chemical structures of coal and coal-derived oils, energy conversion of the low-entropy type, creation of carbon-based functional materials, etc. Furthermore, research and development is under way for enhanced-efficiency conversion of high-temperature thermal energy acquired by fossil fuel combustion into electrical energy and for materials that will constitute nuclear fusion reactors and atomic reactors and will withstand combustion plasma. (NEDO)

The EPRI NDE center after five years

International Nuclear Information System (INIS)

Dau, G.J.; Nemzek, T.A.

1985-01-01

In 1979, the Electric Power Research Institute (EPRI) established a Nondestructive Evaluation (NDE) Center. The purpose of the Center is to provide the electric utility industry with a dedicated NDE development and field-use-qualification capability. Later, the scope of activities at the NDE Center was expanded. Beginning in 1980, the BWR Owners Group (IGSCC) provided funding necessary to operate the BWR Pipe Remedy Demonstration and Training Facility. In 1984, the Maintenance Equipment Applications Center was established by EPRI. Both functions are co-located within the NDE Center. All three functions share common objectives of providing the electric utility industry with a capability dedicated to assuring reduction to practice of new or improved technology, proof testing, qualification for field use, and obtaining code and regulatory acceptance of qualified methods and training. The purpose of this paper is to describe typical activities of the Center and some of the benefits that have accrued. The next section describes the Center organization, operation, and facility, while the remaining sections discuss the technology transfer thrust and benefits

Center for Contaminated Sediments

Data.gov (United States)

Federal Laboratory Consortium — The U.S. Army Corps of Engineers Center for Contaminated Sediments serves as a clearinghouse for technology and expertise concerned with contaminated sediments. The...

Cab technology integration laboratory demonstration with moving map technology

Science.gov (United States)

2013-03-31

A human performance study was conducted at the John A. Volpe National Transportation Systems Center (Volpe Center) using a locomotive research simulatorthe Cab Technology Integration Laboratory (CTIL)that was acquired by the Federal Railroad Ad...

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

2000-01-31

The Online Measurement of Decontamination project team received a commitment for a demonstration in May from the Sacramento (California) Municipal Utility District (SMUD) Rancho Seco site. Since this site is a member of the DOE Commercial Utilities Consortium, the demonstration will fulfill the DOE and commercial technology demonstration requirements. Discussion on deployment of the Integrated Vertical and Overhead Decontamination (IVOD) System at Rancho Seco was conducted; date for deployment tentatively scheduled for early spring. Based upon fictional requirements from SRS for a shiny monitor in a high-level waste tank, FIU-HCET developed and delivered a draft slurry monitor design and draft test plan. Experiments measuring slurry settling time for SRS slurry simulant at 10 wt% have been completed on FIU-HCET'S flow loop with SRS dip. The completed design package of the test mockup for evaluating Non-Intrusive Location of Buried Items Technologies was sent to Fluor Fernald and the Operating Engineers National Hazmat Program for review. Comments are due at the end of January. Preliminary experiments to determine size distribution of aerosols generated during metal cutting were performed. A 1/4-inch-thick iron plate was cut using a plasma arc torch, and the size distribution of airborne particles was measured using a multistage impactor. Per request of DOE-Ohio, FIU-HCET participated in a weeklong value engineering study for the characterization, decontamination, and dismantlement of their critical path facility.

Center for Beam Physics, 1993

International Nuclear Information System (INIS)

1994-05-01

The Center for Beam Physics is a multi-disciplinary research and development unit in the Accelerator and Fusion Research Division at Lawrence Berkeley Laboratory. At the heart of the Center's mission is the fundamental quest for mechanisms of acceleration, radiation and focusing of energy. Dedicated to exploring the frontiers of the physics of (and with) particle and photon beams, its primary mission is to promote the science and technology of the production, manipulation, storage and control systems of charged particles and photons. The Center serves this mission via conceptual studies, theoretical and experimental research, design and development, institutional project involvement, external collaborations, association with industry and technology transfer. This roster provides a glimpse at the scientists, engineers, technical support, students, and administrative staff that make up this team and a flavor of their multifaceted activities during 1993

Une maison de culture (A Culture Center).

Science.gov (United States)

Mourlevat, Alain

1980-01-01

Describes the "Culture Center" designed by Le Corbusier and located in Firminy, France. The role of the center in arousing intellectual curiosity in people living in a technological age is discussed. The audience of this culture center, young people, and the types of activities directed toward them are described. (AMH)

The ConocoPhillips Center for a Sustainable WE2ST (Water-Energy Education, Science, and Technology): Lessons Learned from an Innovative Research-Education-Outreach Center at Colorado School of Mines

Science.gov (United States)

Hogue, T. S.; Blaine, A. C.; Martin, A. C.

2016-12-01

The ConocoPhillips Center for a Sustainable WE2ST (Water-Energy Education, Science, and Technology) is a testament to the power of collaboration and innovation. WE2ST began as a partnership between ConocoPhillips (foundation gift) and the Colorado School of Mines (CSM) with the goal of fostering solutions to water-energy challenges via education, research and outreach. The WE2ST center is a training ground for the next generation of water-energy-social scientists and engineers and is a natural fit for CSM, which is known for its expertise in water resources, water treatment technologies, petroleum engineering, geosciences, and hydrology. WE2ST has nine contributing faculty researchers that combine to create a web of expertise on sustainable energy and water resources. This research benefits unconventional energy producers, water-reliant stakeholders and the general public. Areas of focus for research include water sources (quality and quantity), integrated water-energy solution viability and risk, and social-corporate responsibility. The WE2ST Center currently provides annual support for 8-9 Graduate Fellows and 13 Undergraduate Scholars. Top-tier graduate students are recruited nationally and funded similar to an NSF Graduate Research Fellowship (GRF). Undergraduate Scholars are also recruited from across the CSM campus to gain experience in faculty laboratories and on research teams. All WE2ST students receive extensive professional skills training, leadership development, communication skills training, networking opportunities in the water-energy industries, and outreach opportunities in the community. The corner stone of the WE2ST Center is a focus on communication with the public. Both in social science research teams and in general interactions with the public, WE2ST seeks to be "an honest broker" amidst a very passionate and complex topic. WE2ST research is communicated by presentations at technical conferences, talking with people at public gatherings

Database created with the operation of environmental monitoring program from the Nuclear Technology Development Center (CDTN) - Brazilian CNEN

International Nuclear Information System (INIS)

Peixoto, C.M.

1995-01-01

The environmental control from the Nuclear Technology Development Center (CDTN - Brazilian CNEN) is done through a Program of Environmental Monitoring-PMA, which has been in operation since 1985. To register all the analytic results of the several samples, samples, a database was created. In this work, this database structure as well as the information used in the evaluation of the results obtained from the operation of the above-mentioned PMA are presented. (author). 5 refs, 1 fig, 3 tabs

Pilot testing of a membrane system for postcombustion CO₂ capture

Energy Technology Data Exchange (ETDEWEB)

Merkel, Tim [Membrane Technology And Research, Incorporated, Newark, CA (United States); Kniep, Jay [Membrane Technology And Research, Incorporated, Newark, CA (United States); Wei, Xiaotong [Membrane Technology And Research, Incorporated, Newark, CA (United States); Carlisle, Trevor [Membrane Technology And Research, Incorporated, Newark, CA (United States); White, Steve [Membrane Technology And Research, Incorporated, Newark, CA (United States); Pande, Saurabh [Membrane Technology And Research, Incorporated, Newark, CA (United States); Fulton, Don [Membrane Technology And Research, Incorporated, Newark, CA (United States); Watson, Robert [Membrane Technology And Research, Incorporated, Newark, CA (United States); Hoffman, Thomas [Membrane Technology And Research, Incorporated, Newark, CA (United States); Freeman, Brice [Membrane Technology And Research, Incorporated, Newark, CA (United States); Baker, Richard [Membrane Technology And Research, Incorporated, Newark, CA (United States)

2015-09-30

This final report summarizes work conducted for the U.S. Department of Energy, National Energy Technology Laboratory (DOE) to scale up an efficient post-combustion CO₂ capture membrane process to the small pilot test stage (award number DE-FE0005795). The primary goal of this research program was to design, fabricate, and operate a membrane CO₂ capture system to treat coal-derived flue gas containing 20 tonnes CO₂/day (20 TPD). Membrane Technology and Research (MTR) conducted this project in collaboration with Babcock and Wilcox (B&W), the Electric Power Research Institute (EPRI), WorleyParsons (WP), the Illinois Sustainable Technology Center (ISTC), Enerkem (EK), and the National Carbon Capture Center (NCCC). In addition to the small pilot design, build and slipstream testing at NCCC, other project efforts included laboratory membrane and module development at MTR, validation field testing on a 1 TPD membrane system at NCCC, boiler modeling and testing at B&W, a techno-economic analysis (TEA) by EPRI/WP, a case study of the membrane technology applied to a ~20 MWe power plant by ISTC, and an industrial CO₂ capture test at an Enerkem waste-to-biofuel facility. The 20 TPD small pilot membrane system built in this project successfully completed over 1,000 hours of operation treating flue gas at NCCC. The Polaris™ membranes used on this system demonstrated stable performance, and when combined with over 10,000 hours of operation at NCCC on a 1 TPD system, the risk associated with uncertainty in the durability of postcombustion capture membranes has been greatly reduced. Moreover, next-generation Polaris membranes with higher performance and lower cost were validation tested on the 1 TPD system. The 20 TPD system also demonstrated successful operation of a new low-pressure-drop sweep module that will reduce parasitic energy losses at full scale by as much as 10 MWe. In modeling and pilot boiler testing, B&W confirmed the

Patient-centered applications: use of information technology to promote disease management and wellness. A white paper by the AMIA knowledge in motion working group.

Science.gov (United States)

Demiris, George; Afrin, Lawrence B; Speedie, Stuart; Courtney, Karen L; Sondhi, Manu; Vimarlund, Vivian; Lovis, Christian; Goossen, William; Lynch, Cecil

2008-01-01

Advances in information technology (IT) enable a fundamental redesign of health care processes based on the use and integration of electronic communication at all levels. New communication technologies can support a transition from institution centric to patient-centric applications. This white paper defines key principles and challenges for designers, policy makers, and evaluators of patient-centered technologies for disease management and prevention. It reviews current and emerging trends; highlights challenges related to design, evaluation, reimbursement and usability; and reaches conclusions for next steps that will advance the domain.

ExMC Technology Watch

Science.gov (United States)

Krihak, M.; Barr, Y.; Watkins, S.; Fung, P.; McGrath, T.; Baumann, D.

2012-01-01

The Technology Watch (Tech Watch) project is a NASA endeavor conducted under the Human Research Program's (HRP) Exploration Medical Capability (ExMC) element, and focusing on ExMC technology gaps. The project involves several NASA centers, including the Johnson Space Center (JSC), Glenn Research Center (GRC), Ames Research Center (ARC), and the Langley Research Center (LaRC). The objective of Tech Watch is to identify emerging, high-impact technologies that augment current NASA HRP technology development efforts. Identifying such technologies accelerates the development of medical care and research capabilities for the mitigation of potential health issues encountered during human space exploration missions. The aim of this process is to leverage technologies developed by academia, industry and other government agencies and to identify the effective utilization of NASA resources to maximize the HRP return on investment. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion and further NASA's goal to provide a safe and healthy environment for human exploration. In 2011, the major focus areas for Tech Watch included information dissemination, education outreach and public accessibility to technology gaps and gap reports. The dissemination of information was accomplished through site visits to research laboratories and/or companies, and participation at select conferences where Tech Watch objectives and technology gaps were presented. Presentation of such material provided researchers with insights on NASA ExMC needs for space exploration and an opportunity to discuss potential areas of common interest. The second focus area, education outreach, was accomplished via two mechanisms. First, several senior student projects, each related to an ExMC technology gap, were sponsored by the various NASA centers. These projects presented ExMC related technology problems firsthand to collegiate laboratories

Handbook on data centers

CERN Document Server

Khan, Samee Ullah

2015-01-01

This handbook offers a comprehensive review of the state-of-the-art research achievements in the field of data centers. Contributions from international, leading researchers and scholars offer topics in cloud computing, virtualization in data centers, energy efficient data centers, and next generation data center architecture.  It also comprises current research trends in emerging areas, such as data security, data protection management, and network resource management in data centers. Specific attention is devoted to industry needs associated with the challenges faced by data centers, such as various power, cooling, floor space, and associated environmental health and safety issues, while still working to support growth without disrupting quality of service. The contributions cut across various IT data technology domains as a single source to discuss the interdependencies that need to be supported to enable a virtualized, next-generation, energy efficient, economical, and environmentally friendly data cente...

KCC1: First Nanoparticle developed by KAUST Catalysis Center

KAUST Repository

Basset, Jean-Marie

2010-08-01

KCC1 is the first Nanoparticle developed by KAUST Catalysis Center. Director of KAUST Catalysis Center, Dr. Jean-Marie Basset, Senior Research Scientist at KCC, Dr. Vivek Polshettiwar, and Dr. Dongkyu Cha of the Advanced Nanofabrication Imaging & Characterization Core Laboratory discuss the details of this recent discovery. This video was produced by KAUST Visualization Laboratory and KAUST Technology Transfer and Innovation - Terence McElwee, Director, Technology Transfer and Innovation - IP@kaust.edu.sa This technology is part of KAUST\\'s technology commercialization program that seeks to stimulate development and commercial use of KAUST-developed technologies. For more information email us at ip@kaust.edu.sa.

JSC research and technology

Science.gov (United States)

1993-01-01

The primary roles and missions of JSC incorporate all aspects of human presence in space. Therefore, the Center is involved in the development of technology that will allow humans to stay longer in Earth orbit, allow safe flight in space, and provide capabilities to explore the Moon and Mars. The Center's technology emphasis areas include human spacecraft development, human support systems and infrastructure, and human spacecraft operations. Safety and reliability are critical requirements for the technologies that JSC pursues for long-duration use in space. One of the objectives of technology development at the Center is to give employees the opportunity to enhance their technological expertise and project management skills by defining, designing, and developing projects that are vital to the Center's strategy for the future. This report is intended to communicate within and outside the Agency our research and technology (R&T) accomplishments, as well as inform Headquarters program managers and their constituents of the significant accomplishments that have promise for future Agency programs. While not inclusive of all R&T efforts, the report presents a comprehensive summary of JSC projects in which substantial progress was made in the 1992 fiscal year. At the beginning of each project description, names of the Principal Investigator (PI) and the Technical Monitor (TM) are given, followed by their JSC mail codes or their company or university affiliations. The funding sources and technology focal points are identified in the index.

NASA Earth Science Mission Control Center Enterprise Emerging Technology Study Study (MCC Technology Study)

Science.gov (United States)

Smith, Dan; Horan, Stephen; Royer, Don; Sullivan, Don; Moe, Karen

2015-01-01

This paper reports on the results of the study to identify technologies that could have a significant impact on Earth Science mission operations when looking out at the 5-15 year horizon (through 2025). The potential benefits of the new technologies will be discussed, as well as recommendations for early research and development, prototyping, or analysis for these technologies.

Service Delivery and Related Issues at the Trace Research and Development Center.

Science.gov (United States)

Smith, R. O.

The environmental context of the Trace Center is first briefly described as background for a more detailed description of the center's service delivery activities in the field of rehabilitation/education technology. Trace serves four major functions in rehabilitation/education technology. As a nationally funded rehabilitation engineering center,…

A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers

Directory of Open Access Journals (Sweden)

Mahdi Iran-nejad-parizi

2013-01-01

Full Text Available This study investigates organizational structure, culture, and information technology as knowledge management (KM infrastructural capabilities, and compares their significance and status quo in five medical research centers in Tehran, Iran. Objectives of this research were pursued by employing two statistical methods, regression analysis and Friedman test. Included in the study were 135 people (researchers and support staff from five medical and healthcare research centers of Tehran. A survey questionnaire including 23 questions was utilized to examine organizational structure, culture and information technology indicators. And another 12 questions examined KM effectiveness. The Friedman test indicated that in terms of their status quo, the three studied KM enablers are at different conditions, with organizational culture having the best (mean rank=1.79 and IT the worst (mean rank=2.14 status. Moreover, it was revealed by regression analysis that organizational structure is believed to have the most significant impact (Beta= 0.397 on the effectiveness of knowledge management initiatives, while information technology gained the least perceived impact (Beta= 0.176.

CRADA Payment Options | NCI Technology Transfer Center | TTC

Science.gov (United States)

NCI TTC CRADA PAYMENT OPTIONS: Electronic Payments by Wire Transfer via Fedwire, Mail a check to the Institute or Center, or Automated Clearing House (ACH)/Electronic Funds Transfer (ETF) payments via Pay.gov (NCI ONLY).

Laser Spot Center Detection and Comparison Test

Science.gov (United States)

Zhu, Jun; Xu, Zhengjie; Fu, Deli; Hu, Cong

2018-04-01

High efficiency and precision of the pot center detection are the foundations of avionics instrument navigation and optics measurement basis for many applications. It has noticeable impact on overall system performance. Among them, laser spot detection is very important in the optical measurement technology. In order to improve the low accuracy of the spot center position, the algorithm is improved on the basis of the circle fitting. The pretreatment is used by circle fitting, and the improved adaptive denoising filter for TV repair technology can effectively improves the accuracy of the spot center position. At the same time, the pretreatment and de-noising can effectively reduce the influence of Gaussian white noise, which enhances the anti-jamming capability.

A randomized study of internet parent training accessed from community technology centers.

Science.gov (United States)

Irvine, A Blair; Gelatt, Vicky A; Hammond, Michael; Seeley, John R

2015-05-01

Behavioral parent training (BPT) has been shown to be efficacious to improve parenting skills for problematic interactions with adolescents displaying oppositional and antisocial behaviors. Some research suggests that support group curricula might be transferred to the Internet, and some studies suggest that other curriculum designs might also be effective. In this research, a BPT program for parents of at-risk adolescents was tested on the Internet in a randomized trial (N = 307) from computer labs at six community technology centers in or near large metropolitan areas. The instructional design was based on asynchronous scenario-based e-learning, rather than a traditional parent training model where presentation of course material builds content sequentially over multiple class sessions. Pretest to 30-day follow-up analyses indicated significant treatment effects on parent-reported discipline style (Parenting Scale, Adolescent version), child behavior (Eyberg Child Behavior Inventory), and on social cognitive theory constructs of intentions and self-efficacy. The effect sizes were small to medium. These findings suggest the potential to provide effective parent training programs on the Internet.

Long-Term Demonstration of Hydrogen Production from Coal at Elevated Temperatures Year 6 - Activity 1.12 - Development of a National Center for Hydrogen Technology

Energy Technology Data Exchange (ETDEWEB)

Stanislowski, Joshua; Tolbert, Scott; Curran, Tyler; Swanson, Michael

2012-04-30

The Energy & Environmental Research Center (EERC) has continued the work of the National Center for Hydrogen Technology® (NCHT®) Program Year 6 Task 1.12 project to expose hydrogen separation membranes to coal-derived syngas. In this follow-on project, the EERC has exposed two membranes to coal-derived syngas produced in the pilot-scale transport reactor development unit (TRDU). Western Research Institute (WRI), with funding from the State of Wyoming Clean Coal Technology Program and the North Dakota Industrial Commission, contracted with the EERC to conduct testing of WRI’s coal-upgrading/gasification technology for subbituminous and lignite coals in the EERC’s TRDU. This gasifier fires nominally 200–500 lb/hour of fuel and is the pilot-scale version of the full-scale gasifier currently being constructed in Kemper County, Mississippi. A slipstream of the syngas was used to demonstrate warm-gas cleanup and hydrogen separation using membrane technology. Two membranes were exposed to coal-derived syngas, and the impact of coal-derived impurities was evaluated. This report summarizes the performance of WRI’s patent-pending coalupgrading/ gasification technology in the EERC’s TRDU and presents the results of the warm-gas cleanup and hydrogen separation tests. Overall, the WRI coal-upgrading/gasification technology was shown to produce a syngas significantly lower in CO2 content and significantly higher in CO content than syngas produced from the raw fuels. Warm-gas cleanup technologies were shown to be capable of reducing sulfur in the syngas to 1 ppm. Each of the membranes tested was able to produce at least 2 lb/day of hydrogen from coal-derived syngas.

7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts; 7. Seminario anual de iniciacao cientifica do Centro de Desenvolvimento da Tecnologia Nuclear. Resumos

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques.

Technology Applications Team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

Some aspects of beryllium disposal in Kazakhstan

International Nuclear Information System (INIS)

Shestakov, V.; Chikhray, Y.; Shakhvorostov, Yr.

2004-01-01

Historically in Kazakhstan all disposals of used beryllium and beryllium wasted materials were stored and recycled at JSC ''Ulba Metallurgical Plant''. Since Ulba Metallurgical Plant (beside beryllium and tantalum production) is one of the world largest complex producers of fuel for nuclear power plants as well it has possibilities, technologies and experience in processing toxic and radioactive wastes related with those productions. At present time only one operating Kazakhstan research reactors (EWG1M in Kurchatov) contains beryllium made core. The results of current examination of that core allow using it without replacement long time yet (at least for next five-ten years). Nevertheless the problem how to utilize such irradiated beryllium becomes actual issue for Kazakhstan even today. Since Kazakhstan is the member of ITER/DEMO Reactors Projects and is permanently considered as possible provider of huge amount of beryllium for those reactors so that is the reason for starting studies of possibilities of large scale processing/recycling of such disposed irradiated beryllium. It is clear that the Ulba Metallurgical Plant is considered as the best site for it in Kazakhstan. The draft plan how to organize experimental studies of irradiated beryllium disposals in Kazakhstan involving National Nuclear Center, National University (Almaty), JSC ''Ulba Metallurgical Plant'' (Ust-Kamenogorsk) would be presented in this paper as well as proposals to arrange international collaboration in that field through ISTC (International Science Technology Center, Moscow). (author)

Building Technologies Program Multi-Year Program Plan Technology Validation and Market Introduction 2008

Energy Technology Data Exchange (ETDEWEB)

None, None

2008-01-01

Building Technologies Program Multi-Year Program Plan 2008 for technology validation and market introduction, including ENERGY STAR, building energy codes, technology transfer application centers, commercial lighting initiative, EnergySmart Schools, EnergySmar

The working out of architectural concept for a new type public building — multi-information and education center by using information technologies and mathematical models

Directory of Open Access Journals (Sweden)

Михаил Владимирович Боровиков

2012-12-01

Full Text Available Architectural concept of multifunctional information and educational center and its implementation is given in the author's project. Advanced information technology and mathematical models used in the development of the author project.

High Fidelity Radar Stimulation For Distributed Hardware-in-the-Loop Simulations

Science.gov (United States)

2008-11-20

I L J C-Series Driver Embedded Test CNIP ( ISTC -1) J R E A P - C Strategic ADSI (MDIOC) Dashed Lines indicate passive monitoring by MDSE TCS and...External Sensors Lab Azusa GFC ESI-MP GMD ( ISTC -1) Huntsville ESI-DB • SBX • CD • UEWR • IFICS • CLE • GBI C - S e r i e s C - S e r i e s RDSIS Closed

The Manned Spacecraft Center and medical technology

Science.gov (United States)

Johnston, R. S.; Pool, S. L.

1974-01-01

A number of medically oriented research and hardware development programs in support of manned space flights have been sponsored by NASA. Blood pressure measuring systems for use in spacecraft are considered. In some cases, complete new bioinstrumentation systems were necessary to accomplish a specific physiological study. Plans for medical research during the Skylab program are discussed along with general questions regarding space-borne health service systems and details concerning the Health Services Support Control Center.

Research and development of grid computing technology in center for computational science and e-systems of Japan Atomic Energy Agency

International Nuclear Information System (INIS)

Suzuki, Yoshio

2007-01-01

Center for Computational Science and E-systems of the Japan Atomic Energy Agency (CCSE/JAEA) has carried out R and D of grid computing technology. Since 1995, R and D to realize computational assistance for researchers called Seamless Thinking Aid (STA) and then to share intellectual resources called Information Technology Based Laboratory (ITBL) have been conducted, leading to construct an intelligent infrastructure for the atomic energy research called Atomic Energy Grid InfraStructure (AEGIS) under the Japanese national project 'Development and Applications of Advanced High-Performance Supercomputer'. It aims to enable synchronization of three themes: 1) Computer-Aided Research and Development (CARD) to realize and environment for STA, 2) Computer-Aided Engineering (CAEN) to establish Multi Experimental Tools (MEXT), and 3) Computer Aided Science (CASC) to promote the Atomic Energy Research and Investigation (AERI). This article reviewed achievements in R and D of grid computing technology so far obtained. (T. Tanaka)

Center of Nuclear Physics Data (CNPD), RFNC-VNIIEF

International Nuclear Information System (INIS)

Taova, S.

2011-01-01

Full text: Compilation activity. Three transmission files TRANS.F039, TRANS.F040 and PRELIM.F041 were prepared for the EXFOR data library within the past period. Much attention was paid to the work on error correction. 32 old entries were revised. Besides, there was introduced a set of corrections into entries with index 'A'. Scanning of home journals 'Yadernaya Fizika', 'Izvestiya Academii Nauk' was continued. Articles from old issues of and were also reviewed. Last year the works on the development of the Reference Database for Ion Beam Analysis (IBANDL) performed within the ISTC frames were successfully completed. For three year approximately 800 files including the sets of experimental data on charged particle interaction with nuclei were introduced into the library. Software EXFOR-Editor: Intensive development of EXFOR - Editor is being continued. The software improvement is based mainly on the numerous comments and feedbacks of the users. Lately many new functions and additional service were implemented to the EXFOR - Editor. Constant work on error correction is being performed. In August last year G. Pikulina and S. Taova took part in the Workshop on the development of the Exfor library organized by NDS. Technical reports describing the main steps of the software improvement were presented. On the basis of different comments and advises of the Workshop participants a new version of EXFOR - Editor was prepared. The distributive and a file describing the main changes made in the program were placed at the NDS open area. Optical Model calculations. Last year the works on designing the program code on the basis of optical model for the analysis of elastic scattering cross sections of neutrons, protons, deuterons and alpha particles were completed in general. At present the active testing of this program code is being performed. When designing the program some innovations contributing to accuracy improvement and calculating speed increase were introduced into

Planning nuclear energy centers under technological and demand uncertainty

International Nuclear Information System (INIS)

Meier, P.M.; Palmedo, P.F.

1976-01-01

The question considered is whether new nuclear power plants should be located in nuclear energy centers, or ''power parks'' with co-located fabrication and reprocessing facilities. That issue has been addressed in a recent study by the Nuclear Regulatory Commission and remains under investigation at Brookhaven and elsewhere. So far, however, the advisability of this policy has been analyzed primarily within the framework of a single view of the future. Suggestions of the types of questions that should be asked regarding this policy if it is properly to be viewed as an example of decision making under uncertainty are made. It is concluded that ''A consideration of the various uncertainties involved in the question of dispersed vs. remote siting of energy facilities introduces a number of new elements into the analysis. On balance those considerations provide somewhat greater support for the clustered concept. The NEC approach seems to provide somewhat greater flexibility in accomodating possible future electricity generating technologies. Increased regulatory and construction efficiencies possible in an NEC reduces the impact of demand uncertainty as does the lower costs associated with construction acceleration or deceleration.'' It is also noted that, in the final analysis, ''it is the public's perception of the relative costs and benefits of a measure that determine the acceptability or unacceptability of a particular innovation,'' not the engineer's cost/benefit analysis. It is further noted that if the analysis can identify limits on analytical methods and models, it will not make the job of energy decision-making any easier, but it may make the process more responsive to its impact on society

Involving Minority High School Students in Cutting Edge Research through C-DEBI, an NSF-National Science and Technology Center

Science.gov (United States)

Singer, E.; Edwards, K. J.

2012-12-01

The Center for Dark Energy Biosphere Investigations (C-DEBI) was established as a National Science and Technology Center (NTC) funded by NSF in 2009. Its mission is to explore life beneath the seafloor and make transformative discoveries that advance science, benefit society, and inspire people of all ages and origins. Thanks to the multi-institutional character of C-DEBI, the Center has not only started a collaborative framework for experimental and exploratory research, but also targets education programs at the K-12, undergraduate, graduate and postdoctoral levels involving biogeochemists, microbiologists, geochemists and geologists. An example for this is the introduction of deep biosphere research into the K-12 classroom. In this context, C-DEBI has collaborated with teachers from the Animo Leadership High School in Inglewood, which is ranked 27th within California and has a total minority enrollment of 99%, to adapt Marine Biology classes and introduce latest Deep Biosphere Science discoveries. Three high school students participated in a pilot project over 6 months to gain hands-on experience in an ongoing study in a Marine Microbiology laboratory at University of Southern California. Graduate and postdoctoral students from the Departments of Biological and Earth Sciences supervised theory, praxis and project design, which was aimed at culturing strains of Marinobacter, one of the most ubiquitous marine microbial genera, and preparing extracted DNA for sequencing using the latest Ion Torrent Technology. Students learned about the interdisciplinary global context of the study and gained experience in laboratory procedures, including basic aseptical techniques, molecular biology methods, and cutting-edge sequencing Technology, as well as problem-solving and creative thinking in project preparation and conduction. This hands-on training included discussions about the 'Whys' and 'Hows' in today's research with respect to their specific project, but also from a

Clean Energy Solutions Center Services (Vietnamese Translation) (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-11-01

This is the Vietnamese language translation of the Clean Energy Solutions Center (Solutions Center) fact sheet. The Solutions Center helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

Clean Energy Solutions Center Services (Arabic Translation) (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-06-01

This is the Arabic translation of the Clean Energy Solutions Center Services fact sheet. The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

Louisiana Transportation Research Center : Annual report, 2016-2017

Science.gov (United States)

2017-10-11

This publication is a report of the transportation research, technology transfer, education, and training activities of the Louisiana Transportation Research Center for July 1, 2016 - June 30, 2017. The center is sponsored jointly by the Louisiana De...

Canada's Global Partnership Program

International Nuclear Information System (INIS)

Ellis, M.

2007-01-01

Curbing the proliferation of biological weapons (BW) is an essential element of the Global Partnership Against the Spread of Weapons and Materials of Mass Destruction. At the Kananaskis Summit in June 2002, G8 Leaders committed to prevent terrorists, or those that harbour them, from acquiring or developing biological weapons and related materials, equipment and technology. To this end, Canada's Global Partnership Program is investing heavily in biological non-proliferation activities in countries of the former Soviet Union. A comprehensive strategy has been developed to help improve biological safety (biosafety) and biological security (biosecurity) with provision for addressing dual-use concerns. Raising awareness and creating a self-sustaining culture of biosecurity is a key driver of the program. Through this strategy, Canada is assisting various FSU countries to: develop and implement effective and practical biosafety/biosecurity standards and guidelines; establish national and/or regional biosafety associations; develop and deliver effective biosafety and biosecurity training; put in place enhanced physical security measures and equipment. In addition to biosafety and biosecurity, the GPP supports a broad range of Biological Non-Proliferation projects and initiatives, including dozens of projects aimed at redirecting former biological weapons scientists. To date, most of these activities have been supported through Canada's contribution to the International Science and Technology Center (ISTC) and the Science and Technology Centre Ukraine (STCU).(author)

Electric Power Research Institute Environmental Control Technology Center: Report to the Steering Committee, June 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

Operations and maintenance continued this month at the Electric Power Research Institute`s (EPRI`s) Environmental Control Technology Center (ECTC). Testing for the Hazardous Air Pollutant (HAP) test block was conducted using the 4.0 MW Spray Dryer Absorber System (SDA) and Pulse Jet Fabric Filter (PJFF) - Carbon Injection System. Investigations also continued across the B&W/CHX Heat Exchanger unit, while the 1.0 MW Selective Catalytic Reduction (SCR) unit remained idle this month in a cold-standby mode as monthly inspections were conducted. Pilot Testing Highlights Testing efforts in June were focused on the HAP test block and the Trace Elements Removal (TER) test block. Both programs were conducted on the 4.0 MW wet FGD pilot unit and PJFF unit. The HAP test block was temporarily concluded in June to further review the test data. This program began in March as part of the DOE Advanced Power Systems Program; the mission of this program is to accelerate the commercialization of affordable, high-efficiency, low-emission, coal-fueled electric generating technologies. The 1996 HAP test block focuses on three research areas, including: Catalytic oxidation of vapor-phase elemental mercury; Enhanced particulate-phase HAPs removal by electrostatic charging of liquid droplets; and Enhanced mercury removal by addition of additives to FGD process liquor. The TER test block is part of EPRI`s overall program to develop control technology options for reduction of trace element emissions. This experimental program investigates mercury removal and mercury speciation under different operating conditions.

The USC Epigenome Center.

Science.gov (United States)

Laird, Peter W

2009-10-01

The University of Southern California (USC, CA, USA) has a long tradition of excellence in epigenetics. With the recent explosive growth and technological maturation of the field of epigenetics, it became clear that a dedicated high-throughput epigenomic data production facility would be needed to remain at the forefront of epigenetic research. To address this need, USC launched the USC Epigenome Center as the first large-scale center in academics dedicated to epigenomic research. The Center is providing high-throughput data production for large-scale genomic and epigenomic studies, and developing novel analysis tools for epigenomic research. This unique facility promises to be a valuable resource for multidisciplinary research, education and training in genomics, epigenomics, bioinformatics, and translational medicine.

Human Spaceflight Technology Needs - A Foundation for JSC's Technology Strategy

Science.gov (United States)

Stecklein, Jonette M.

2013-01-01

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which adds risks as well as provides a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation s primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (TechNeeds) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology

Human-Centered Design Bill of Rights for Educators.

Science.gov (United States)

Sugar, William A.

This paper presents a potential solution to encourage technology adoption and integration within schools by proposing a human-centered technology "bill of rights" for educators. The intention of this bill of rights it to influence educators' beliefs towards technology and to enable educators to confront with confidence the seemingly…

Learning System Center App Controller

CERN Document Server

Naeem, Nasir

2015-01-01

This book is intended for IT professionals working with Hyper-V, Azure cloud, VMM, and private cloud technologies who are looking for a quick way to get up and running with System Center 2012 R2 App Controller. To get the most out of this book, you should be familiar with Microsoft Hyper-V technology. Knowledge of Virtual Machine Manager is helpful but not mandatory.

Fuel cycles and fission products clean up for the MOSART concept

Energy Technology Data Exchange (ETDEWEB)

Ignatiev, V. V.; Feynberg, O. S.; Zakirov, R. Y. [Russian Research Center, Kurchatov Institute, Moscow (Russian Federation)

2008-08-15

Analysis of different methods for MOSART fuel salt clean up and experimental results produced within ISTC 1606 permits to make the following conclusions: {center_dot} Fuel salt clean up steps of Li,Be/F MOSART system could be based on the method of reductive extraction in liquid bismuth. {center_dot} Electrodeposition on solid indifferent electrodes (Mo, W) is not effective for separation of actinides and lanthanides in Li,Na,Be/F melt. However, preliminary experiments on electrodeposition on solid non indifferent electrodes (nickel) give foundation to suppose that An/Ln separation on these electrodes could be more effective. In order to determine characteristics of An/Ln electrochemical separation, it is necessary to conduct additional studies in Li,Na,Be/F melt on solid non indifferent electrodes.

NASA's Corrosion Technology Laboratory at the Kennedy Space Center: Anticipating, Managing, and Preventing Corrosion

Science.gov (United States)

Calle, Luz Marina

2014-01-01

Corrosion is the degradation of a material that results from its interaction with the environment. The marine environment at NASAs Kennedy Space Center (KSC) has been documented by ASM International (formerly American Society for Metals) as the most corrosive in the United States. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pads were rendered even more severe by the 70 tons of highly corrosive hydrochloric acid that were generated by the solid rocket boosters. Numerous failures at the launch pads are caused by corrosion.The structural integrity of ground infrastructure and flight hardware is critical to the success, safety, cost, and sustainability of space missions. As a result of fifty years of experience with launch and ground operations in a natural marine environment that is highly corrosive, NASAs Corrosion Technology Laboratory at KSC is a major source of corrosion control expertise in the launch and other environments. Throughout its history, the Laboratory has evolved from what started as an atmospheric exposure facility near NASAs launch pads into a world-wide recognized capability that provides technical innovations and engineering services in all areas of corrosion for NASA and external customers.This presentation will provide a historical overview of the role of NASAs Corrosion Technology in anticipating, managing, and preventing corrosion. One important challenge in managing and preventing corrosion involves the detrimental impact on humans and the environment of what have been very effective corrosion control strategies. This challenge has motivated the development of new corrosion control technologies that are more effective and environmentally friendly. Strategies for improved corrosion protection and durability can have a huge impact on the economic sustainability of human spaceflight operations.

UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence

Energy Technology Data Exchange (ETDEWEB)

Erickson, Paul

2012-05-31

This is the final report of the UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence which spanned from 2005-2012. The U.S. Department of Energy (DOE) established the Graduate Automotive Technology Education (GATE) Program, to provide a new generation of engineers and scientists with knowledge and skills to create advanced automotive technologies. The UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence established in 2005 is focused on research, education, industrial collaboration and outreach within automotive technology. UC Davis has had two independent GATE centers with separate well-defined objectives and research programs from 1998. The Fuel Cell Center, administered by ITS-Davis, has focused on fuel cell technology. The Hybrid-Electric Vehicle Design Center (HEV Center), administered by the Department of Mechanical and Aeronautical Engineering, has focused on the development of plug-in hybrid technology using internal combustion engines. The merger of these two centers in 2005 has broadened the scope of research and lead to higher visibility of the activity. UC Davis's existing GATE centers have become the campus's research focal points on fuel cells and hybrid-electric vehicles, and the home for graduate students who are studying advanced automotive technologies. The centers have been highly successful in attracting, training, and placing top-notch students into fuel cell and hybrid programs in both industry and government.

Person-centered care and engagement via technology of residents with dementia in aged care facilities.

Science.gov (United States)

Goh, Anita M Y; Loi, Samantha M; Westphal, Alissa; Lautenschlager, Nicola T

2017-12-01

Touchscreen technology (TT) is a resource that can improve the quality of life of residents with dementia, and care staff, in residential aged care facilities (RACF) through a person-centered care approach. To enable the use of TTs to engage and benefit people with dementia in RACFs, education is needed to explore how these devices may be used, what facilitates use, and how to address barriers. We sought to provide education and explore RACF staff views and barriers on using TT to engage their residents with dementia. An educational session on using TT with residents with dementia was given to staff from three long-term RACFs in Melbourne, Australia. A cross-sectional convenience sample of 17 staff members (personal care attendants, registered nurses, enrolled nurses, allied health clinicians, and domestic staff) who attended were administered questionnaires pre- and post-sessions. As a result of the education seminar, they were significantly more confident in their ability to use TT devices with residents. TT, and education to staff about its use with residents with dementia, is a useful strategy to enhance RACF staff knowledge and confidence, thereby enhancing the use of technology in RACFs in order to improve care standards in people with dementia.

Manufacturing technologies

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

The Soviet center of astronomical data

International Nuclear Information System (INIS)

Dluzhnevskaya, O.B.

1982-01-01

On the basis of the current French-Soviet cooperation in science and technology, the Astronomical Council of the U.S.S.R. Academy of Sciences and the Strasbourg Center signed in 1977 an agreement on setting up the Soviet Center of Astronomical Data as its filial branch. The Soviet Center was created on the basis of a computation center at the Zvenigorod station of the Astronomical Council of the U.S.S.R. Academy of Sciences, which had already had considerable experience of working with stellar catalogues. In 1979 the Center was equipped with a EC-1033 computer. In 1978-1979 the Soviet Center of Astronomical Data (C.A.D.) received from Strasbourg 96 of the most important catalogues. By September 1981 the list of catalogues available at the Soviet Center has reached 140 catalogues some of which are described. (Auth.)

1991 research and technology

Science.gov (United States)

1992-01-01

Selected research and technology activities at Ames Research Center, including the Moffett Field site and the Dryden Flight Research Facility, are summarized. These activities exemplify the Center's varied and productive research efforts for 1991.

Optical Multidimensional Switching for Data Center Networks

OpenAIRE

Kamchevska, Valerija; Galili, Michael; Oxenløwe, Leif Katsuo; Berger, Michael Stübert

2017-01-01

Optical switches are known for the ability to provide high bandwidth connectivity at a relatively low power consumption and low latency. Several recent demonstrations on optical data center architectures confirm the potential for introducing all-optical switching within the data center, thus avoiding power hungry optical-electrical-optical conversions at each node. This Ph.D. thesis focuses precisely on the application of optical technologies in data center networks where optics is not only u...

Technology Transfer: Marketing Tomorrow's Technology

Science.gov (United States)

Tcheng, Erene

1995-01-01

The globalization of the economy and the end of the Cold War have triggered many changes in the traditional practices of U.S. industry. To effectively apply the resources available to the United States, the federal government has firmly advocated a policy of technology transfer between private industry and government labs, in this case the National Aeronautics and Space Administration (NASA). NASA Administrator Daniel Goldin is a strong proponent of this policy and has organized technology transfer or commercialization programs at each of the NASA field centers. Here at Langley Research Center, the Technology Applications Group (TAG) is responsible for facilitating the transfer of Langley developed research and technology to U.S. industry. Entering the program, I had many objectives for my summer research with TAG. Certainly, I wanted to gain a more thorough understanding of the concept of technology transfer and Langley's implementation of a system to promote it to both the Langley community and the community at large. Also, I hoped to become more familiar with Langley's research capabilities and technology inventory available to the public. More specifically, I wanted to learn about the technology transfer process at Langley. Because my mentor is a member of Materials and Manufacturing marketing sector of the Technology Transfer Team, another overriding objective for my research was to take advantage of his work and experience in materials research to learn about the Advanced Materials Research agency wide and help market these developments to private industry. Through the various projects I have been assigned to work on in TAG, I have successfully satisfied the majority of these objectives. Work on the Problem Statement Process for TAG as well as the development of the Advanced Materials Research Brochure have provided me with the opportunity to learn about the technology transfer process from the outside looking in and the inside looking out. Because TAG covers

Advanced Training Technologies and Learning Environments

Science.gov (United States)

Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

1999-01-01

This document contains the proceedings of the Workshop on Advanced Training Technologies and Learning Environments held at NASA Langley Research Center, Hampton, Virginia, March 9-10, 1999. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objective of the workshop was to assess the status and effectiveness of different advanced training technologies and learning environments.

Technological advances for studying human behavior

Science.gov (United States)

Roske-Hofstrand, Renate J.

1990-01-01

Technological advances for studying human behavior are noted in viewgraph form. It is asserted that performance-aiding systems are proliferating without a fundamental understanding of how they would interact with the humans who must control them. Two views of automation research, the hardware view and the human-centered view, are listed. Other viewgraphs give information on vital elements for human-centered research, a continuum of the research process, available technologies, new technologies for persistent problems, a sample research infrastructure, the need for metrics, and examples of data-link technology.

Secondary Waste Considerations for Vitrification of Sodium-Bearing Waste at the Idaho Nuclear Technology and Engineering Center FY-2001 Status Report

International Nuclear Information System (INIS)

Herbst, A.K.; Kirkham, R.J.; Losinski, S.J.

2002-01-01

The Idaho Nuclear Technology and Engineering Center (INTEC) is considering vitrification to process liquid sodium-bearing waste. Preliminary studies were completed to evaluate the potential secondary wastes from the melter off-gas clean up systems. Projected secondary wastes comprise acidic and caustic scrubber solutions, HEPA filters, activated carbon, and ion exchange media. Possible treatment methods, waste forms, and disposal sites are evaluated from radiological and mercury contamination estimates

Secondary Waste Considerations for Vitrification of Sodium-Bearing Waste at the Idaho Nuclear Technology and Engineering Center FY-2001 Status Report

Energy Technology Data Exchange (ETDEWEB)

Herbst, A.K.; Kirkham, R.J.; Losinski, S.J.

2002-09-26

The Idaho Nuclear Technology and Engineering Center (INTEC) is considering vitrification to process liquid sodium-bearing waste. Preliminary studies were completed to evaluate the potential secondary wastes from the melter off-gas clean up systems. Projected secondary wastes comprise acidic and caustic scrubber solutions, HEPA filters, activated carbon, and ion exchange media. Possible treatment methods, waste forms, and disposal sites are evaluated from radiological and mercury contamination estimates.

Corium phase equilibria based on MASCA, METCOR and CORPHAD results

Energy Technology Data Exchange (ETDEWEB)

Bechta, S.V.; Granovsky, V.S.; Khabensky, V.B. [Alexandrov Research Institute of Technologies (NITI), Sosnovy Bor (Russian Federation); Gusarov, V.V.; Almiashev, V.I.; Mezentseva, L.P. [Grebenshikov Institute of Silicate Chemistry, Russian Academy of Sciences (ISCh RAS), St. Petersburg (Russian Federation); Krushinov, E.V.; Kotova, S.Yu.; Kosarevsky, R.A. [Alexandrov Research Institute of Technologies (NITI), Sosnovy Bor (Russian Federation); Barrachin, M. [Institut de Radioprotection et Surete Nucleaire IRSN/DPAM, St Paul lez Durance (France); Bottomley, D. [EUROPAISCHE KOMMISSION, Joint Research Centre Institut fuer Transurane (ITU), Karlsruhe (Germany); Fichot, F. [Institut de Radioprotection et Surete Nucleaire IRSN/DPAM, St Paul lez Durance (France); Fischer, M. [AREVA NP GmbH, Erlangen (Germany)], E-mail: Manfred.Fischer@areva.com

2008-10-15

Experimental data on component partitioning between suboxidized corium melt and steel in the in-vessel melt retention (IVR) conditions are compared. The data are produced within the OECD MASCA program and the ISTC CORPHAD project under close-to-isothermal conditions and in the ISTC METCOR project under thermal gradient conditions. Chemical equilibrium in the U-Zr-Fe(Cr,Ni,...)-O system is reached in all experiments. In MASCA tests the molten pool formed under inert atmosphere has two immiscible liquids, oxygen-enriched (oxidic) and oxygen-depleted (metallic), resulting of the miscibility gap of the mentioned system. Sub-system data of the U-Zr-Fe(Cr,Ni,...)-O phase diagram investigated within the ISTC CORPHAD project are interpreted in relation with the MASCA results. In METCOR tests the equilibrium is established between oxidic liquid and mushy metallic part of the system. Results of comparison are discussed and the implications for IVR noted.

Voice Over Internet Protocol (VoIP) in a Control Center Environment

Science.gov (United States)

Pirani, Joseph; Calvelage, Steven

2010-01-01

The technology of transmitting voice over data networks has been available for over 10 years. Mass market VoIP services for consumers to make and receive standard telephone calls over broadband Internet networks have grown in the last 5 years. While operational costs are less with VoIP implementations as opposed to time division multiplexing (TDM) based voice switches, is it still advantageous to convert a mission control center s voice system to this newer technology? Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) has converted its mission voice services to a commercial product that utilizes VoIP technology. Results from this testing, design, and installation have shown unique considerations that must be addressed before user operations. There are many factors to consider for a control center voice design. Technology advantages and disadvantages were investigated as they refer to cost. There were integration concerns which could lead to complex failure scenarios but simpler integration for the mission infrastructure. MSFC HOSC will benefit from this voice conversion with less product replacement cost, less operations cost and a more integrated mission services environment.

DATA CENTER REMODELING FOR THE INTERNET OF THINGS

Directory of Open Access Journals (Sweden)

Cristian IVĂNUŞ

2015-05-01

Full Text Available Designing efficient data center is more than ever a challenge for many companies when it comes to meet the requirements of having a greater and extensible computing capacity. It should be stored increasing volumes of data. Applications became increasingly complex. The requirements for running business operations should be very flexible. If we want that ICT infrastructure (Information Technology & Communication to be able to offer, continuosly, high level of services, it is essential to rethink the "robustness" and the need for innovation in data centers. This is true for both servers and storage as well as for the processing power. Companies operating in this field help customers to optimize their data center availability and security by evaluating the energy consumption, cooling capacity and other factors involved in data centers upgrading. The objective is to obtain an optimum in terms of occupied space, most efficient power consumption and most effective cooling in order to achieve a sustainable long term data center operation. The development and modernization explosive data centers as a result to the three major trends existent in the IT (Information Technology now: cloud computing, Internet of Things and Big Data [1, 9].

Center for Technology for Advanced Scientific Component Software (TASCS) Consolidated Progress Report July 2006 - March 2009

Energy Technology Data Exchange (ETDEWEB)

Bernholdt, D E; McInnes, L C; Govindaraju, M; Bramley, R; Epperly, T; Kohl, J A; Nieplocha, J; Armstrong, R; Shasharina, S; Sussman, A L; Sottile, M; Damevski, K

2009-04-14

A resounding success of the Scientific Discovery through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedented computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative high-performance scientific computing.

NASA's Corrosion Technology Laboratory at the Kennedy Space Center: Anticipating, Managing, and Preventing Corrosion

Science.gov (United States)

Calle, Luz Marina

2015-01-01

The marine environment at NASAs Kennedy Space Center (KSC) has been documented by ASM International (formerly American Society for Metals) as the most corrosive in North America. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pads were rendered even more severe by the highly corrosive hydrochloric acid (HCl) generated by the solid rocket boosters (SRBs). Numerous failures at the launch pads are caused by corrosion. The structural integrity of ground infrastructure and flight hardware is critical to the success, safety, cost, and sustainability of space missions. NASA has over fifty years of experience dealing with unexpected failures caused by corrosion and has developed expertise in corrosion control in the launch and other environments. The Corrosion Technology Laboratory at KSC evolved, from what started as an atmospheric exposure test site near NASAs launch pads, into a capability that provides technical innovations and engineering services in all areas of corrosion for NASA, external partners, and customers.This paper provides a chronological overview of NASAs role in anticipating, managing, and preventing corrosion in highly corrosive environments. One important challenge in managing and preventing corrosion involves the detrimental impact on humans and the environment of what have been very effective corrosion control strategies. This challenge has motivated the development of new corrosion control technologies that are more effective and environmentally friendly. Strategies for improved corrosion protection and durability can have a huge impact on the economic sustainability of human spaceflight operations.

The design of neonatal incubators: a systems-oriented, human-centered approach.

Science.gov (United States)

Ferris, T K; Shepley, M M

2013-04-01

This report describes a multidisciplinary design project conducted in an academic setting reflecting a systems-oriented, human-centered philosophy in the design of neonatal incubator technologies. Graduate students in Architectural Design and Human Factors Engineering courses collaborated in a design effort that focused on supporting the needs of three user groups of incubator technologies: infant patients, family members and medical personnel. Design teams followed established human-centered design methods that included interacting with representatives from the user groups, analyzing sets of critical tasks and conducting usability studies with existing technologies. An iterative design and evaluation process produced four conceptual designs of incubators and supporting equipment that better address specific needs of the user groups. This report introduces the human-centered design approach, highlights some of the analysis findings and design solutions, and offers a set of design recommendations for future incubation technologies.

Microsoft System Center 2012 Orchestrator cookbook

CERN Document Server

Erskine, Samuel

2013-01-01

This book is written in a practical, Cookbook style with numerous chapters and recipes focusing on creating runbooks to automate mission critical and everyday administration tasks.System Center 2012 Orchestrator is for administrators who wish to simplify the process of automating systems administration tasks. This book assumes that you have a basic knowledge of Windows Server 2008 Administration, Active Directory, Network Systems, and Microsoft System Center technologies.

Center for X-ray Optics (CXRO)

Data.gov (United States)

Federal Laboratory Consortium — The Center for X-Ray Optics at Lawrence Berkeley National Laboratory works to further science and technology using short wavelength optical systems and techniques....

Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Aeronautics Research Mission Directorate Projects at NASA Glenn Research Center for 2015

Science.gov (United States)

Nguyen, Hung D.; Steele, Gynelle C.; Morris, Jessica R.

2015-01-01

This document is intended to enable the more effective transition of NASA Glenn Research Center (GRC) SBIR technologies funded by the Small Business Innovation Research (SBIR) program as well as its companion, the Small Business Technology Transfer (STTR) program into NASA Aeronautics Research Mission Directorate (ARMD) projects. Primarily, it is intended to help NASA program and project managers find useful technologies that have undergone extensive research and development (RRD), through Phase II of the SBIR program; however, it can also assist non-NASA agencies and commercial companies in this process. aviation safety, unmanned aircraft, ground and flight test technique, low emissions, quiet performance, rotorcraft

Annual report of Nuclear Technology and Education Center (April 1, 2005 - March 31, 2006)

International Nuclear Information System (INIS)

2006-12-01

This report summarizes the activities of the Nuclear Technology and Education Center (NuTEC) of the Japan Atomic Energy Agency (JAEA) in the fiscal year 2005. On unification of JAERI and JNC on October, 2005, the former NuTEC of JAERI and the Human Resources Development Section of JNC were reorganized as the new NuTEC. Concomitantly, the training courses on nuclear emergency preparedness, held at the former NuTEC, was transferred to NEAT, JAEA, and the management related to university cooperation was assigned as one of the tasks of the new NuTEC. In total, the number of trainees for the general domestic training courses was 652, while that for the staff technical training courses was 616. The international training courses have also been carried out as planned. In addition, supportive activities for the Nuclear Professional School of Tokyo University, commenced in April, 2005, have been made mainly concerning the experimental exercises for the students. (author)

The Chicago Center for Green Technology: life-cycle assessment of a brownfield redevelopment project

International Nuclear Information System (INIS)

Brecheisen, Thomas; Theis, Thomas

2013-01-01

The sustainable development of brownfields reflects a fundamental, yet logical, shift in thinking and policymaking regarding pollution prevention. Life-cycle assessment (LCA) is a tool that can be used to assist in determining the conformity of brownfield development projects to the sustainability paradigm. LCA was applied to the process of a real brownfield redevelopment project, now known as the Chicago Center for Green Technology, to determine the cumulative energy required to complete the following redevelopment stages: (1) brownfield assessment and remediation, (2) building rehabilitation and site development and (3) ten years of operation. The results of the LCA have shown that operational energy is the dominant life-cycle stage after ten years of operation. The preservation and rehabilitation of the existing building, the installation of renewable energy systems (geothermal and photovoltaic) on-site and the use of more sustainable building products resulted in 72 terajoules (TJ) of avoided energy impacts, which would provide 14 years of operational energy for the site. (letter)

Environmental management technology demonstration and commercialization

International Nuclear Information System (INIS)

Daly, D.J.; Erickson, T.A.; Groenewold, G.H.

1995-01-01

The Energy ampersand Environmental Research Center (EERC), a contract-supported organization focused on technology research, development, demonstration, and commercialization (RDD ampersand C), is entering its second year of a Cooperative Agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) to facilitate the development, demonstration, and commercialization of innovative environmental management (EM) technologies in support of the activities of DOE's Office of Environmental Science and Technology (EM-50) under DOE's EM Program. This paper reviews the concept and approach of the program under the METC-EERC EM Cooperative Agreement and profiles the role the program is playing in the commercialization of five EM technologies

Environmental management technology demonstration and commercialization

Energy Technology Data Exchange (ETDEWEB)

Daly, D.J.; Erickson, T.A.; Groenewold, G.H. [Energy & Environmental Research Center, Grand Forks, ND (United States)] [and others

1995-10-01

The Energy & Environmental Research Center (EERC), a contract-supported organization focused on technology research, development, demonstration, and commercialization (RDD&C), is entering its second year of a Cooperative Agreement with the U.S. Department of Energy (DOE) Morgantown Energy Technology Center (METC) to facilitate the development, demonstration, and commercialization of innovative environmental management (EM) technologies in support of the activities of DOE`s Office of Environmental Science and Technology (EM-50) under DOE`s EM Program. This paper reviews the concept and approach of the program under the METC-EERC EM Cooperative Agreement and profiles the role the program is playing in the commercialization of five EM technologies.

Idaho Nuclear Technology and Engineering Center (INTEC) Sodium Bearing Waste - Waste Incidental to Reprocessing Determination

International Nuclear Information System (INIS)

Jacobson, Victor Levon

2002-01-01

U.S. Department of Energy Manual 435.1-1, Radioactive Waste Management, Section I.1.C, requires that all radioactive waste subject to Department of Energy Order 435.1 be managed as high-level radioactive waste, transuranic waste, or low-level radioactive waste. Determining the radiological classification of the sodium-bearing waste currently in the Idaho Nuclear Technology and Engineering Center Tank Farm Facility inventory is important to its proper treatment and disposition. This report presents the technical basis for making the determination that the sodium-bearing waste is waste incidental to spent fuel reprocessing and should be managed as mixed transuranic waste. This report focuses on the radiological characteristics of the sodium-bearing waste. The report does not address characterization of the nonradiological, hazardous constituents of the waste in accordance with Resource Conservation and Recovery Act requirements

Research and Technology 1997

Science.gov (United States)

1998-01-01

This report highlights the challenging work accomplished during fiscal year 1997 by Ames research scientists and engineers. The work is divided into accomplishments that support the goals of NASA s four Strategic Enterprises: Aeronautics and Space Transportation Technology, Space Science, Human Exploration and Development of Space (HEDS), and Earth Science. NASA Ames Research Center s research effort in the Space, Earth, and HEDS Enterprises is focused i n large part to support Ames lead role for Astrobiology, which broadly defined is the scientific study of the origin, distribution, and future of life in the universe. This NASA initiative in Astrobiology is a broad science effort embracing basic research, technology development, and flight missions. Ames contributions to the Space Science Enterprise are focused in the areas of exobiology, planetary systems, astrophysics, and space technology. Ames supports the Earth Science Enterprise by conducting research and by developing technology with the objective of expanding our knowledge of the Earth s atmosphere and ecosystems. Finallv, Ames supports the HEDS Enterprise by conducting research, managing spaceflight projects, and developing technologies. A key objective is to understand the phenomena surrounding the effects of gravity on living things. Ames has also heen designated the Agency s Center of Evcellence for Information Technnlogv. The three cornerstones of Information Technology research at Ames are automated reasoning, human-centered computing, and high performance computing and networking.

The Stanford University US-Japan Technology Management Center

National Research Council Canada - National Science Library

Dasher, Richard

2002-01-01

..., nanotechnologies, MEMS, system-level chip integration, and advanced manufacturing. Our technology management focus embraced industry standards and standardization, intellectual property management, U.S...

PREFACE: Fourth International Symposium on Atomic Technology

Science.gov (United States)

Okada, Shigefumi

2010-04-01

The International Symposium on Atomic Technology (ISAT) is held every year. The 4th Symposium (ISAT-4) was held on November 18-19, 2009 at the Seaside Hotel MAIKO VILLA KOBE, Kobe City, Japan presided by the "Atomic Technology Project". The ISAT-4 symposium was intended to offer a forum for the discussion on the latest progress in the atomic technologies. The symposium was attended by 107 delegates. There were 10 invited and 6 oral presentations. The number of poster presentations was 69. From all the contributions, 22 papers selected through review process are contained in this volume. The "Atomic Technology Project" was started in 2006 as a joint project of three institutions; (1) the Center for Atomic and Molecular Technologies, Graduate School of Engineering, Osaka University (CAMT), (2) the Tsukuba Research Center for Interdisciplinary Materials Science, Graduate School of Pure and Applied Sciences, University of Tsukuba (TIMS) and (3) the Polyscale Technology Research Center, Research Institute for Science and Technology, Tokyo University of Science (PTRC), each of which were independently pursuing nano-technologies and was developing atomic scale operation and diagnostics, functional materials, micro processing and device. The project is funded by the Ministry of Education, Culture, Sports, Science and Technology of Japan. The goal of the project is to contribute to the development of atomic-scale science and technologies such as functional molecules, biomaterials, and quantum functions of atomic-scale structures. Shigefumi Okada Conference Chair Center for Atomic and Molecular Technologies, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita-city, Osaka 565-0871, Japan. Conference photograph Kobe photograph

Kazakhstan innovation projects in nuclear technologies field

International Nuclear Information System (INIS)

Shkol'nik, V.S.; Tukhvatulin, Sh.T.

2005-01-01

At present in the Republic of Kazakhstan in preparation and realization stage there are several innovation projects related with use of advanced nuclear technologies. Projects are as follows: 'Implementation of Kazakhstan thermonuclear reactor tokamak (KTM)'; 'Implementation at the L.N. Gumilev Eurasian National University the inter-disciplinary research complex on the heavy ions accelerator base'; 'Development of the Technological Park 'Nuclear Technologies Center in Kurchatov city'; 'Development the first in the Central-Asian region Center of Nuclear Medicine and Biophysics'. The initiator and principal operator of these projects is the National Nuclear Center of the Republic of Kazakhstan

Patient- and Provider-Centered Design of an Outpatient Diabetes Technology Clinic

OpenAIRE

Cramer, Angela M.; Scalzo, Patricia; Bach, Sarah M.; Kudva, Yogish C.

2016-01-01

The number of US patients using diabetes technology is increasing, and sophisticated technologies continue to emerge. Patients using diabetes technology require access to providers prepared to offer care in this rapidly changing field. The authors sought to identify factors important to both patients using diabetes technology and providers caring for such patients. They redesigned the Diabetes Technology Clinic at an academic group practice in response to the needs of patients and providers. ...

JRCAT - A Nanotechnology Center in Tsukuba

International Nuclear Information System (INIS)

Tanaka, Kazunobu

2000-01-01

Joint Research Center for Atom Technology (JRCAT) and its Atom Technology Project are described. The project covers a wide range of research subjects; manipulation of atoms and molecules, formation of nanostructures of semiconductors, spin electronics and first-principles calculation of dynamic processes of atoms and molecules on solid-state surfaces. Several recent achievements on nanotechnology and nanoscience are roughly sketched

NASA technology applications team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

This report covers the activities of the Research Triangle Institute (RTI) Technology Applications Team for the period 1 October 1992 through 30 September 1993. The work reported herein was supported by the National Aeronautics and Space Administration (NASA), Contract No. NASW-4367. Highlights of the RTI Applications Team activities over the past year are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. Appendix B includes Technology Opportunity Announcements and Spinoff! Sheets prepared by the Team while Appendix C contains a series of technology transfer articles prepared by the Team.

Staff roster for 1979: National Center for Analysis of Energy Systems

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

This publication is a compilation of resumes from the current staff of the National Center for Analysis of Energy Systems. The Center, founded in January 1976, is one of four areas within the Department of Energy and Environment at Brookhaven National Laboratory. The emphasis of programs at the Center is on energy policy and planning studies at the regional, national, and international levels, involving quantitative, interdisciplinary studies of the technological, economic, social, and environmental aspects of energy systems. To perform these studies the Center has assembled a staff of experts in the areas of science, technology, economics planning, health and safety, information systems, and quantitative analysis.

Classification of Security Operation Centers

CSIR Research Space (South Africa)

Jacobs, P

2013-08-01

Full Text Available Security Operation Centers (SOCs) are a necessary service for organisations that want to address compliance and threat management. While there are frameworks in existence that addresses the technology aspects of these services, a holistic framework...

MSU-Northern Bio-Energy Center of Excellence

Energy Technology Data Exchange (ETDEWEB)

Kegel, Greg [Montana State Univ., Bozeman, MT (United States); Alcorn-Windy Boy, Jessica [Montana State Univ., Bozeman, MT (United States); Abedin, Md. Joynal [Montana State Univ., Bozeman, MT (United States); Maglinao, Randy [Montana State Univ., Bozeman, MT (United States)

2014-09-30

MSU-Northern established the Bio-Energy Center (the Center) into a Regional Research Center of Excellence to address the obstacles concerning biofuels, feedstock, quality, conversion process, economic viability and public awareness. The Center built its laboratories and expertise in order to research and support product development and commercialization for the bio-energy industry in our region. The Center wanted to support the regional agricultural based economy by researching biofuels based on feedstock’s that can be grown in our region in an environmentally responsible manner. We were also interested in any technology that will improve the emissions and fuel economy performance of heavy duty diesel engines. The Center had a three step approach to accomplish these goals: 1. Enhance the Center’s research and testing capabilities 2. Develop advanced biofuels from locally grown agricultural crops. 3. Educate and outreach for public understanding and acceptance of new technology. The Center was very successful in completing the tasks as outlined in the project plan. Key successes include discovering and patenting a new chemical conversion process for converting camelina oil to jet fuel, as well as promise in developing a heterogeneous Grubs catalyst to support the new chemical conversion process. The Center also successfully fragmented and deoxygenated naturally occurring lignin with a Ni-NHC catalyst, showing promise for further exploration of using lignin for fuels and fuel additives. This would create another value-added product for lignin that can be sourced from beetle kill trees or waste products from cellulose ethanol fuel facilities.

Environmental Technology Verification Report: Taconic Energy, Inc. TEA Fuel Additive

Science.gov (United States)

The Greenhouse Gas Technology Center (GHG Center) is one of six verification organizations operating under EPA’s ETV program. One sector of significant interest to GHG Center stakeholders is transportation - particularly technologies that result in fuel economy improvements. Taco...

Study on the operational guides of the off-site emergency management center

International Nuclear Information System (INIS)

Park, Won Jong; Han, S. J.; Oh, K. H.

2005-01-01

The emergency response organizational groups and roles of Off-site Emergency Management Center was proposed to respond in case of radiological emergency. Development of implementing procedures of Off-site Emergency Management Center in case of radiological emergency to improve effective co-operation and rapid response in radiological emergency. Establishment of 'The Ordinance of Operation of residence radiological emergency office of the Minister of Science and Technology' and announced by the Minister of Science and Technology. The Implementing procedures of Off-site Emergency Management Center and 'The Ordinance of Operation of residence radiological emergency office of the Minister of Science and Technology' can be provide guidelines in case of emergency

Effective technology transfer through regional information teams

International Nuclear Information System (INIS)

Wicks, D.E.; Gahan, B.; Hoyle, G.

1997-01-01

Communication and the transfer of technical information is critical to the international gas industry. The technical research results developed through Gas Research Institute's natural gas supply program have been disseminated through a number of vehicles. Two primary vehicles are GRI's Information Centers and Regional Technology Transfer Agents (RTTA). The Information Centers serve as repositories for GRI information as well as provide no-cost literature searching expertise. The RTTAs actively communicate and interface with area producers, introducing potential technology adopters with GRI technology managers and/or the appropriate licensed product or service distributors. The combination of Information Centers and RTTAs continues to help independent producers break through the barriers of technology and accelerate the benefits of lower cost natural gas recovery. (au)

What do we mean by Human-Centered Design of Life-Critical Systems?

Science.gov (United States)

Boy, Guy A

2012-01-01

Human-centered design is not a new approach to design. Aerospace is a good example of a life-critical systems domain where participatory design was fully integrated, involving experimental test pilots and design engineers as well as many other actors of the aerospace engineering community. This paper provides six topics that are currently part of the requirements of the Ph.D. Program in Human-Centered Design of the Florida Institute of Technology (FIT.) This Human-Centered Design program offers principles, methods and tools that support human-centered sustainable products such as mission or process control environments, cockpits and hospital operating rooms. It supports education and training of design thinkers who are natural leaders, and understand complex relationships among technology, organizations and people. We all need to understand what we want to do with technology, how we should organize ourselves to a better life and finally find out whom we are and have become. Human-centered design is being developed for all these reasons and issues.

Activities of the Center for Space Construction

Science.gov (United States)

1993-01-01

The Center for Space Construction (CSC) at the University of Colorado at Boulder is one of eight University Space Engineering Research Centers established by NASA in 1988. The mission of the center is to conduct research into space technology and to directly contribute to space engineering education. The center reports to the Department of Aerospace Engineering Sciences and resides in the College of Engineering and Applied Science. The college has a long and successful track record of cultivating multi-disciplinary research and education programs. The Center for Space Construction is prominent evidence of this record. At the inception of CSC, the center was primarily founded on the need for research on in-space construction of large space systems like space stations and interplanetary space vehicles. The scope of CSC's research has now evolved to include the design and construction of all spacecraft, large and small. Within this broadened scope, our research projects seek to impact the underlying technological basis for such spacecraft as remote sensing satellites, communication satellites, and other special purpose spacecraft, as well as the technological basis for large space platforms. The center's research focuses on three areas: spacecraft structures, spacecraft operations and control, and regolith and surface systems. In the area of spacecraft structures, our current emphasis is on concepts and modeling of deployable structures, analysis of inflatable structures, structural damage detection algorithms, and composite materials for lightweight structures. In the area of spacecraft operations and control, we are continuing our previous efforts in process control of in-orbit structural assembly. In addition, we have begun two new efforts in formal approach to spacecraft flight software systems design and adaptive attitude control systems. In the area of regolith and surface systems, we are continuing the work of characterizing the physical properties of lunar

The Center for Aerospace Research: A NASA Center of Excellence at North Carolina Agricultural and Technical State University

Science.gov (United States)

Lai, Steven H.-Y.

1992-01-01

This report documents the efforts and outcomes of our research and educational programs at NASA-CORE in NCA&TSU. The goal of the center was to establish a quality aerospace research base and to develop an educational program to increase the participation of minority faculty and students in the areas of aerospace engineering. The major accomplishments of this center in the first year are summarized in terms of three different areas, namely, the center's research programs area, the center's educational programs area, and the center's management area. In the center's research programs area, we focus on developing capabilities needed to support the development of the aerospace plane and high speed civil transportation system technologies. In the educational programs area, we developed an aerospace engineering option program ready for university approval.

Impelementation of Information Technology Service Management at Data And Information System Center of XYZ University

Directory of Open Access Journals (Sweden)

Kornelius Irfandhi

2016-03-01

Full Text Available Information Technology (IT is increasingly progressing. Nowadays, the success of a business of the organization/company is highly dependent on the IT infrastructure used. Therefore, organizations/companies have to manage their IT service to be optimal to their customers. Looking at this matter and the increasing dynamics of XYZ University, then Data and Information System Center (Pusdatin - an IT provider of XYZ University began implementing IT Service Management (ITSM from 2013 using the latest version of Information Technology Infrastructure Library (ITIL, namely ITIL v3 as a framework for implementing ITSM in its business processes. However, along the way, there are still some problems happen in Pusdatin in order that ITSM can actually support and align with the objectives of XYZ University. Through this paper, the authors want to explain how the implementation of ITSM at Pusdatin, identify the problems related to the implementation of ITSM, and provide the solutions for each problem. The methods used are direct observation to Pusdatin, conductan interview with the Head of Pusdatin and Staff of Pusdatin, and also perform a literature review of books and papers that discuss about ITIL. The result of this research is that ITSM process of Pusdatin generally works quite well but there are still some shortcomings because ITSM is not 100% implemented in all areas.

NASA Technology Applications Team: Commercial applications of aerospace technology

Science.gov (United States)

1994-01-01

The Research Triangle Institute (RTI) Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies, that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. The RTI Team has been successful in the development of NASA/industry partnerships and commercialization of NASA technologies. RTI ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed and implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs. (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology. And (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

NASA Technology Transfer System

Science.gov (United States)

Tran, Peter B.; Okimura, Takeshi

2017-01-01

NTTS is the IT infrastructure for the Agency's Technology Transfer (T2) program containing 60,000+ technology portfolio supporting all ten NASA field centers and HQ. It is the enterprise IT system for facilitating the Agency's technology transfer process, which includes reporting of new technologies (e.g., technology invention disclosures NF1679), protecting intellectual properties (e.g., patents), and commercializing technologies through various technology licenses, software releases, spinoffs, and success stories using custom built workflow, reporting, data consolidation, integration, and search engines.

Green Propellant Infusion Mission Program Development and Technology Maturation

Science.gov (United States)

McLean, Christopher H.; Deininger, William D.; Joniatis, John; Aggarwal, Pravin K.; Spores, Ronald A.; Deans, Matthew; Yim, John T.; Bury, Kristen; Martinez, Jonathan; Cardiff, Eric H.;

Technologies for life

International Nuclear Information System (INIS)

Kerner, J.

2006-01-01

In this video-film technologies applied in the BIONT, a. s. are presented. Production of radionuclides and radiopharmaceuticals as well as principles of positron emission tomography and diagnostic using is explained. Other technologies implemented and planned in the Cyclotron Center of the Slovak Republic are presented.

Best Practices Guide for Energy-Efficient Data Center Design

Energy Technology Data Exchange (ETDEWEB)

O. VanGeet: NREL

2010-02-24

This guide provides an overview of best practices for energy-efficient data center design which spans the categories of Information Technology (IT) systems and their environmental conditions, data center air management, cooling and electrical systems, on-site generation, and heat recovery.

NASA's National Center for Advanced Manufacturing

Science.gov (United States)

Vickers, John

2003-01-01

NASA has designated the Principal Center Assignment to the Marshall Space Flight Center (MSFC) for implementation of the National Center for Advanced Manufacturing (NCAM). NCAM is NASA s leading resource for the aerospace manufacturing research, development, and innovation needs that are critical to the goals of the Agency. Through this initiative NCAM s people work together with government, industry, and academia to ensure the technology base and national infrastructure are available to develop innovative manufacturing technologies with broad application to NASA Enterprise programs, and U.S. industry. Educational enhancements are ever-present within the NCAM focus to promote research, to inspire participation and to support education and training in manufacturing. Many important accomplishments took place during 2002. Through NCAM, NASA was among five federal agencies involved in manufacturing research and development (R&D) to launch a major effort to exchange information and cooperate directly to enhance the payoffs from federal investments. The Government Agencies Technology Exchange in Manufacturing (GATE-M) is the only active effort to specifically and comprehensively address manufacturing R&D across the federal government. Participating agencies include the departments of Commerce (represented by the National Institute of Standards and Technology), Defense, and Energy, as well as the National Science Foundation and NASA. MSFC s ongoing partnership with the State of Louisiana, the University of New Orleans, and Lockheed Martin Corporation at the Michoud Assembly Facility (MAF) progressed significantly. Major capital investments were initiated for world-class equipment additions including a universal friction stir welding system, composite fiber placement machine, five-axis machining center, and ten-axis laser ultrasonic nondestructive test system. The NCAM consortium of five universities led by University of New Orleans with Mississippi State University

Study of hydrogen isotopes super permeation through vanadium membrane on 'Prometheus' setup

International Nuclear Information System (INIS)

Musyaev, R. K.; Yukhimchuk, A. A.; Lebedev, B. S.; Busnyuk, A. O.; Notkin, M. E.; Samartsev, A. A.; Livshits, A. I.

2008-01-01

To develop the membrane pumping technology by means of superpermeable membranes at RFNC-VNIIEF in the 'Prometheus' setup, the experiments on superpermeation of hydrogen isotopes through metal membranes were carried out. The experimental results on superpermeation of thermal atoms of hydrogen isotopes including tritium through a cylindrical vanadium membrane are presented. The possibility of effective pumping, compression and recuperation of hydrogen isotopes by means of superpermeable membrane was demonstrated. The evaluation of membrane pumping rates and asymmetry degree of pure vanadium membrane was given. The work was performed under the ISTC-2854 project. (authors)

Factors That Explain the Attitude towards Statistics in High-School Students: Empirical Evidence at Technological Study Center of the Sea in Veracruz, Mexico