WorldWideScience

Sample records for technology assessment database

  1. Healthcare Databases in Thailand and Japan: Potential Sources for Health Technology Assessment Research.

    Science.gov (United States)

    Saokaew, Surasak; Sugimoto, Takashi; Kamae, Isao; Pratoomsoot, Chayanin; Chaiyakunapruk, Nathorn

    2015-01-01

    Health technology assessment (HTA) has been continuously used for value-based healthcare decisions over the last decade. Healthcare databases represent an important source of information for HTA, which has seen a surge in use in Western countries. Although HTA agencies have been established in Asia-Pacific region, application and understanding of healthcare databases for HTA is rather limited. Thus, we reviewed existing databases to assess their potential for HTA in Thailand where HTA has been used officially and Japan where HTA is going to be officially introduced. Existing healthcare databases in Thailand and Japan were compiled and reviewed. Databases' characteristics e.g. name of database, host, scope/objective, time/sample size, design, data collection method, population/sample, and variables were described. Databases were assessed for its potential HTA use in terms of safety/efficacy/effectiveness, social/ethical, organization/professional, economic, and epidemiological domains. Request route for each database was also provided. Forty databases- 20 from Thailand and 20 from Japan-were included. These comprised of national censuses, surveys, registries, administrative data, and claimed databases. All databases were potentially used for epidemiological studies. In addition, data on mortality, morbidity, disability, adverse events, quality of life, service/technology utilization, length of stay, and economics were also found in some databases. However, access to patient-level data was limited since information about the databases was not available on public sources. Our findings have shown that existing databases provided valuable information for HTA research with limitation on accessibility. Mutual dialogue on healthcare database development and usage for HTA among Asia-Pacific region is needed.

  2. Comparison of literature searches on quality and costs for health technology assessment using the MEDLINE and EMBASE databases.

    Science.gov (United States)

    Topfer, L A; Parada, A; Menon, D; Noorani, H; Perras, C; Serra-Prat, M

    1999-01-01

    Biomedical databases are an important source of information for health technology assessment. However, there is considerable variation in the costs of accessing commercial databases. We sought to measure the quality, amount of overlap, and costs of information retrieved from two of the main database sources--MEDLINE and EMBASE. Librarians at two health technology assessment agencies ran a total of eight literature searches on various medical technologies, using both databases. All search results were independently reviewed by two researchers. The researchers were asked to identify relevant references and to rank each of these according to a level of evidence scale. The results were tabulated to show the number of references identified by each database, the number of relevant references ranked by level of evidence, and the number of these references that were unique to one or the other database. The cost of retrieving references from each source was also calculated. Each database contained relevant references not available in the other. Because of the longer time lag for indexing in MEDLINE, many of the references that originally appeared to be unique to EMBASE were subsequently available in MEDLINE as well. Since our study was conducted, MEDLINE has been made available worldwide, free of charge, via the Internet. Hence, the cost difference between the databases is now even greater. However, notwithstanding the costs, it appears that literature searches that rely on only one or the other database will inevitably miss pertinent information.

  3. National Assessment Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Assessment Database stores and tracks state water quality assessment decisions, Total Maximum Daily Loads (TMDLs) and other watershed plans designed to...

  4. Designing Corporate Databases to Support Technology Innovation

    Science.gov (United States)

    Gultz, Michael Jarett

    2012-01-01

    Based on a review of the existing literature on database design, this study proposed a unified database model to support corporate technology innovation. This study assessed potential support for the model based on the opinions of 200 technology industry executives, including Chief Information Officers, Chief Knowledge Officers and Chief Learning…

  5. Surgery Risk Assessment (SRA) Database

    Data.gov (United States)

    Department of Veterans Affairs — The Surgery Risk Assessment (SRA) database is part of the VA Surgical Quality Improvement Program (VASQIP). This database contains assessments of selected surgical...

  6. Relational Database Technology: An Overview.

    Science.gov (United States)

    Melander, Nicole

    1987-01-01

    Describes the development of relational database technology as it applies to educational settings. Discusses some of the new tools and models being implemented in an effort to provide educators with technologically advanced ways of answering questions about education programs and data. (TW)

  7. Asbestos Exposure Assessment Database

    Science.gov (United States)

    Arcot, Divya K.

    2010-01-01

    Exposure to particular hazardous materials in a work environment is dangerous to the employees who work directly with or around the materials as well as those who come in contact with them indirectly. In order to maintain a national standard for safe working environments and protect worker health, the Occupational Safety and Health Administration (OSHA) has set forth numerous precautionary regulations. NASA has been proactive in adhering to these regulations by implementing standards which are often stricter than regulation limits and administering frequent health risk assessments. The primary objective of this project is to create the infrastructure for an Asbestos Exposure Assessment Database specific to NASA Johnson Space Center (JSC) which will compile all of the exposure assessment data into a well-organized, navigable format. The data includes Sample Types, Samples Durations, Crafts of those from whom samples were collected, Job Performance Requirements (JPR) numbers, Phased Contrast Microscopy (PCM) and Transmission Electron Microscopy (TEM) results and qualifiers, Personal Protective Equipment (PPE), and names of industrial hygienists who performed the monitoring. This database will allow NASA to provide OSHA with specific information demonstrating that JSC s work procedures are protective enough to minimize the risk of future disease from the exposures. The data has been collected by the NASA contractors Computer Sciences Corporation (CSC) and Wyle Laboratories. The personal exposure samples were collected from devices worn by laborers working at JSC and by building occupants located in asbestos-containing buildings.

  8. A hypertext-based Internet-assessable database for the MSFC Technology Transfer Office

    Science.gov (United States)

    Jackson, Jeff

    1994-01-01

    There exists a continuing need to disseminate technical information and facilities capabilities from NASA field centers in an effort to promote the successful transfer of technologies developed with public funds to the private sector. As technology transfer is a stated NASA mission, there exists a critical need for NASA centers to document technology capabilities and disseminate this information on as wide a basis as possible. Certainly local and regional dissemination is critical, but global dissemination of scientific and engineering facilities and capabilities gives NASA centers the ability to contribute to technology transfer on a much broader scale. Additionally, information should be disseminated in a complete and rapidly available form. To accomplish this information dissemination, the unique capabilities of the Internet are being exploited. The Internet allows widescale information distribution in a rapid fashion to aid in the accomplishment of technology transfer goals established by the NASA/MSFC Technology Transfer Office. Rapid information retrieval coupled with appropriate electronic feedback, allows the scientific and technical capabilities of Marshall Space Flight Center, often unique in the world, to be explored by a large number of potential benefactors of NASA (or NASA-derived) technologies. Electronic feedback, coupled with personal contact with the MSFC Technology Transfer Office personnel, allows rapid responses to technical requests from industry and academic personnel as well as private citizens. The remainder of this report gives a brief overview of the Mosaic software and a discussion of technology transfer office and laboratory facilities data that have been made available on the Internet to promote technology transfer.

  9. National Database for Autism Research (NDAR): Big Data Opportunities for Health Services Research and Health Technology Assessment.

    Science.gov (United States)

    Payakachat, Nalin; Tilford, J Mick; Ungar, Wendy J

    2016-02-01

    The National Database for Autism Research (NDAR) is a US National Institutes of Health (NIH)-funded research data repository created by integrating heterogeneous datasets through data sharing agreements between autism researchers and the NIH. To date, NDAR is considered the largest neuroscience and genomic data repository for autism research. In addition to biomedical data, NDAR contains a large collection of clinical and behavioral assessments and health outcomes from novel interventions. Importantly, NDAR has a global unique patient identifier that can be linked to aggregated individual-level data for hypothesis generation and testing, and for replicating research findings. As such, NDAR promotes collaboration and maximizes public investment in the original data collection. As screening and diagnostic technologies as well as interventions for children with autism are expensive, health services research (HSR) and health technology assessment (HTA) are needed to generate more evidence to facilitate implementation when warranted. This article describes NDAR and explains its value to health services researchers and decision scientists interested in autism and other mental health conditions. We provide a description of the scope and structure of NDAR and illustrate how data are likely to grow over time and become available for HSR and HTA.

  10. Database management systems understanding and applying database technology

    CERN Document Server

    Gorman, Michael M

    1991-01-01

    Database Management Systems: Understanding and Applying Database Technology focuses on the processes, methodologies, techniques, and approaches involved in database management systems (DBMSs).The book first takes a look at ANSI database standards and DBMS applications and components. Discussion focus on application components and DBMS components, implementing the dynamic relationship application, problems and benefits of dynamic relationship DBMSs, nature of a dynamic relationship application, ANSI/NDL, and DBMS standards. The manuscript then ponders on logical database, interrogation, and phy

  11. Database Access through Java Technologies

    Directory of Open Access Journals (Sweden)

    Nicolae MERCIOIU

    2010-09-01

    Full Text Available As a high level development environment, the Java technologies offer support to the development of distributed applications, independent of the platform, providing a robust set of methods to access the databases, used to create software components on the server side, as well as on the client side. Analyzing the evolution of Java tools to access data, we notice that these tools evolved from simple methods that permitted the queries, the insertion, the update and the deletion of the data to advanced implementations such as distributed transactions, cursors and batch files. The client-server architectures allows through JDBC (the Java Database Connectivity the execution of SQL (Structured Query Language instructions and the manipulation of the results in an independent and consistent manner. The JDBC API (Application Programming Interface creates the level of abstractization needed to allow the call of SQL queries to any DBMS (Database Management System. In JDBC the native driver and the ODBC (Open Database Connectivity-JDBC bridge and the classes and interfaces of the JDBC API will be described. The four steps needed to build a JDBC driven application are presented briefly, emphasizing on the way each step has to be accomplished and the expected results. In each step there are evaluations on the characteristics of the database systems and the way the JDBC programming interface adapts to each one. The data types provided by SQL2 and SQL3 standards are analyzed by comparison with the Java data types, emphasizing on the discrepancies between those and the SQL types, but also the methods that allow the conversion between different types of data through the methods of the ResultSet object. Next, starting from the metadata role and studying the Java programming interfaces that allow the query of result sets, we will describe the advanced features of the data mining with JDBC. As alternative to result sets, the Rowsets add new functionalities that

  12. A Database Management Assessment Instrument

    Science.gov (United States)

    Landry, Jeffrey P.; Pardue, J. Harold; Daigle, Roy; Longenecker, Herbert E., Jr.

    2013-01-01

    This paper describes an instrument designed for assessing learning outcomes in data management. In addition to assessment of student learning and ABET outcomes, we have also found the instrument to be effective for determining database placement of incoming information systems (IS) graduate students. Each of these three uses is discussed in this…

  13. Multimedia database retrieval technology and applications

    CERN Document Server

    Muneesawang, Paisarn; Guan, Ling

    2014-01-01

    This book explores multimedia applications that emerged from computer vision and machine learning technologies. These state-of-the-art applications include MPEG-7, interactive multimedia retrieval, multimodal fusion, annotation, and database re-ranking. The application-oriented approach maximizes reader understanding of this complex field. Established researchers explain the latest developments in multimedia database technology and offer a glimpse of future technologies. The authors emphasize the crucial role of innovation, inspiring users to develop new applications in multimedia technologies

  14. Advanced Technologies for Distributed Database Services Hyperinfrastructure

    Science.gov (United States)

    Vaniachine, Alexandre; Malon, David; Vranicar, Matthew

    HEP collaborations are deploying grid technologies to address petabyte-scale data processing challenges. In addition to file-based event data, HEP data processing requires access to terabytes of non-event data (detector conditions, calibrations, etc.) stored in relational databases. Inadequate for non-event data delivery in these amounts, database access control technologies for grid computing are limited to encrypted message transfers. To overcome these database access limitations one must go beyond the existing grid infrastructure. A proposed hyperinfrastructure of distributed database services implements efficient secure data access methods. We introduce several technologies laying a foundation of a new hyperinfrastructure. We present efficient secure data transfer methods and secure grid query engine technologies federating heterogeneous databases. Lessons learned in a production environment of ATLAS Data Challenges are presented.

  15. Evolution of Database Replication Technologies for WLCG

    CERN Document Server

    Baranowski, Zbigniew; Blaszczyk, Marcin; Dimitrov, Gancho; Canali, Luca

    2015-01-01

    In this article we summarize several years of experience on database replication technologies used at WLCG and we provide a short review of the available Oracle technologies and their key characteristics. One of the notable changes and improvement in this area in recent past has been the introduction of Oracle GoldenGate as a replacement of Oracle Streams. We report in this article on the preparation and later upgrades for remote replication done in collaboration with ATLAS and Tier 1 database administrators, including the experience from running Oracle GoldenGate in production. Moreover, we report on another key technology in this area: Oracle Active Data Guard which has been adopted in several of the mission critical use cases for database replication between online and offline databases for the LHC experiments.

  16. California Fish Passage Assessment Database [ds69

    Data.gov (United States)

    California Department of Resources — The Passage Assessment Database shapefile contains locations of known and potential barriers to salmonid migration in California streams with additional information...

  17. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Loken, S.C. [ed.

    1993-01-01

    The emphasis in Information Technology (IT) development has shifted from technology management to information management, and the tools of information management are increasingly at the disposal of end-users, people who deal with information. Moreover, the interactive capabilities of technologies such as hypertext, scientific visualization, virtual reality, video conferencing, and even database management systems have placed in the hands of users a significant amount of discretion over how these resources will be used. The emergence of high-performance networks, as well as network operating systems, improved interoperability, and platform independence of applications will eliminate technical barriers to the use of data, increase the power and range of resources that can be used cooperatively, and open up a wealth of possibilities for new applications. The very scope of these prospects for the immediate future is a problem for the IT planner or administrator. Technology procurement and implementation, integration of new technologies into the existing infrastructure, cost recovery and usage of networks and networked resources, training issues, and security concerns such as data protection and access to experiments are just some of the issues that need to be considered in the emerging IT environment. As managers we must use technology to improve competitiveness. When procuring new systems, we must take advantage of scalable resources. New resources such as distributed file systems can improve access to and efficiency of existing operating systems. In addition, we must assess opportunities to improve information worker productivity and information management through tedmologies such as distributed computational visualization and teleseminar applications.

  18. Risk assessment and toxicology databases for health effects assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lu, P.Y.; Wassom, J.S. [Oak Ridge National Laboratory, TN (United States)

    1990-12-31

    Scientific and technological developments bring unprecedented stress to our environment. Society has to predict the results of potential health risks from technologically based actions that may have serious, far-reaching consequences. The potential for error in making such predictions or assessment is great and multiplies with the increasing size and complexity of the problem being studied. Because of this, the availability and use of reliable data is the key to any successful forecasting effort. Scientific research and development generate new data and information. Much of the scientific data being produced daily is stored in computers for subsequent analysis. This situation provides both an invaluable resource and an enormous challenge. With large amounts of government funds being devoted to health and environmental research programs and with maintenance of our living environment at stake, we must make maximum use of the resulting data to forecast and avert catastrophic effects. Along with the readily available. The most efficient means of obtaining the data necessary for assessing the health effects of chemicals is to utilize applications include the toxicology databases and information files developed at ORNL. To make most efficient use of the data/information that has already been prepared, attention and resources should be directed toward projects that meticulously evaluate the available data/information and create specialized peer-reviewed value-added databases. Such projects include the National Library of Medicine`s Hazardous Substances Data Bank, and the U.S. Air Force Installation Restoration Toxicology Guide. These and similar value-added toxicology databases were developed at ORNL and are being maintained and updated. These databases and supporting information files, as well as some data evaluation techniques are discussed in this paper with special focus on how they are used to assess potential health effects of environmental agents. 19 refs., 5 tabs.

  19. Advanced information technology: Building stronger databases

    Energy Technology Data Exchange (ETDEWEB)

    Price, D. [Lawrence Livermore National Lab., CA (United States)

    1994-12-01

    This paper discusses the attributes of the Advanced Information Technology (AIT) tool set, a database application builder designed at the Lawrence Livermore National Laboratory. AIT consists of a C library and several utilities that provide referential integrity across a database, interactive menu and field level help, and a code generator for building tightly controlled data entry support. AIT also provides for dynamic menu trees, report generation support, and creation of user groups. Composition of the library and utilities is discussed, along with relative strengths and weaknesses. In addition, an instantiation of the AIT tool set is presented using a specific application. Conclusions about the future and value of the tool set are then drawn based on the use of the tool set with that specific application.

  20. Health technology assessment in Finland

    DEFF Research Database (Denmark)

    Mäkelä, Marjukka; Roine, Risto P

    2010-01-01

    Since the 1990s, health policy makers in Finland have been supportive of evidence-based medicine and approaches to implement its results. The Finnish Office for Health Technology Assessment (Finohta) has grown from a small start in 1995 to a medium-sized health technology assessment (HTA) agency......, with special responsibility in providing assessments to underpin national policies in screening. External evaluations enhanced the rapid growth. In the Finnish environment, decision making on health technologies is extremely decentralized, so Finohta has developed some practical tools for implementing HTA...... findings. The Managed Uptake of Medical Methods program links the hospital districts to agree on introduction of technologies. The Ohtanen database provides Finnish-language summaries of major assessments made in other countries....

  1. Development of Information Technology of Object-relational Databases Design

    Directory of Open Access Journals (Sweden)

    Valentyn A. Filatov

    2012-12-01

    Full Text Available The article is concerned with the development of information technology of object-relational databases design and study of object features infological and logical database schemes entities and connections.

  2. Towards P2P XML Database Technology

    NARCIS (Netherlands)

    Y. Zhang (Ying)

    2007-01-01

    textabstractTo ease the development of data-intensive P2P applications, we envision a P2P XML Database Management System (P2P XDBMS) that acts as a database middle-ware, providing a uniform database abstraction on top of a dynamic set of distributed data sources. In this PhD work, we research which

  3. Advocacy and technology assessment

    Science.gov (United States)

    Jones, E. M.

    1975-01-01

    A highly structured treatment is presented of adversarial systems as they apply to technology assessment. One approach to the problem of adequate criteria of assessment focuses upon the internal operations of assessment entities; operations include problem perception, problem formulation, selection, utilization, determination, and evaluation. Potential contributions of advocacy as a mode of inquiry in technology are discussed; advocacy is evaluated by representative sets of criteria of adequate assessment which include participant criteria, perspectives criteria, situations criteria, base values criteria, and strategies criteria.

  4. DOE technology information management system database study report

    Energy Technology Data Exchange (ETDEWEB)

    Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

    1994-11-01

    To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

  5. Database security and encryption technology research and application

    Science.gov (United States)

    Zhu, Li-juan

    2013-03-01

    The main purpose of this paper is to discuss the current database information leakage problem, and discuss the important role played by the message encryption techniques in database security, As well as MD5 encryption technology principle and the use in the field of website or application. This article is divided into introduction, the overview of the MD5 encryption technology, the use of MD5 encryption technology and the final summary. In the field of requirements and application, this paper makes readers more detailed and clearly understood the principle, the importance in database security, and the use of MD5 encryption technology.

  6. Ceramic Technology Project database: September 1990 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    Data generated within the Ceramic Technology Project (CTP) represent a valuable resource for both research and industry. The CTP database was created to provide easy access to this information in electronic and hardcopy forms by using a computerized database and by issuing periodic hardcopy reports on the database contents. This report is the sixth in a series of semiannual database summaries and covers recent additions to the database, including joined brazed specimen test data. It covers 1 SiC, 34 SiN, 10 whisker-reinforced SiN, 2 zirconia-toughened aluminas, 8 zirconias, and 34 joints.

  7. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. [ed.

    1992-01-01

    This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  8. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. (ed.)

    1992-01-01

    This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  9. Scalable Database Access Technologies for ATLAS Distributed Computing

    CERN Document Server

    Vaniachine, A

    2009-01-01

    ATLAS event data processing requires access to non-event data (detector conditions, calibrations, etc.) stored in relational databases. The database-resident data are crucial for the event data reconstruction processing steps and often required for user analysis. A main focus of ATLAS database operations is on the worldwide distribution of the Conditions DB data, which are necessary for every ATLAS data processing job. Since Conditions DB access is critical for operations with real data, we have developed the system where a different technology can be used as a redundant backup. Redundant database operations infrastructure fully satisfies the requirements of ATLAS reprocessing, which has been proven on a scale of one billion database queries during two reprocessing campaigns of 0.5 PB of single-beam and cosmics data on the Grid. To collect experience and provide input for a best choice of technologies, several promising options for efficient database access in user analysis were evaluated successfully. We pre...

  10. Health care technology assessment

    Science.gov (United States)

    Goodman, Clifford

    1994-12-01

    The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

  11. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  12. Potentials of Advanced Database Technology for Military Information Systems

    NARCIS (Netherlands)

    Choenni, Sunil; Bruggeman, Ben

    2001-01-01

    Research and development in database technology evolves in several directions, which are not necessarily divergent. A number of these directions might be promising for military information systems as well. In this paper, we discuss the potentials of multi-media databases and data mining. Both direct

  13. Alternative treatment technology information center computer database system

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, D. [Environmental Protection Agency, Edison, NJ (United States)

    1995-10-01

    The Alternative Treatment Technology Information Center (ATTIC) computer database system was developed pursuant to the 1986 Superfund law amendments. It provides up-to-date information on innovative treatment technologies to clean up hazardous waste sites. ATTIC v2.0 provides access to several independent databases as well as a mechanism for retrieving full-text documents of key literature. It can be accessed with a personal computer and modem 24 hours a day, and there are no user fees. ATTIC provides {open_quotes}one-stop shopping{close_quotes} for information on alternative treatment options by accessing several databases: (1) treatment technology database; this contains abstracts from the literature on all types of treatment technologies, including biological, chemical, physical, and thermal methods. The best literature as viewed by experts is highlighted. (2) treatability study database; this provides performance information on technologies to remove contaminants from wastewaters and soils. It is derived from treatability studies. This database is available through ATTIC or separately as a disk that can be mailed to you. (3) underground storage tank database; this presents information on underground storage tank corrective actions, surface spills, emergency response, and remedial actions. (4) oil/chemical spill database; this provides abstracts on treatment and disposal of spilled oil and chemicals. In addition to these separate databases, ATTIC allows immediate access to other disk-based systems such as the Vendor Information System for Innovative Treatment Technologies (VISITT) and the Bioremediation in the Field Search System (BFSS). The user may download these programs to their own PC via a high-speed modem. Also via modem, users are able to download entire documents through the ATTIC system. Currently, about fifty publications are available, including Superfund Innovative Technology Evaluation (SITE) program documents.

  14. Analysis of technologies databases use in physical education and sport

    Directory of Open Access Journals (Sweden)

    Usychenko V.V.

    2010-03-01

    Full Text Available Analysis and systematization is conducted scientific methodical and the special literature. The questions of the use of technology of databases rise in the system of preparation of sportsmen. The necessity of application of technologies of operative treatment of large arrays of sporting information is rotined. Collected taking on the use of computer-aided technologies of account and analysis of results of testing of parameters of training process. The question of influence of technologies is considered on training and competition activity. A database is presented «Athlete». A base contains anthropometric and myometrical indexes of sportsmen of bodybuilding of high qualification.

  15. A novel approach: chemical relational databases, and the role of the ISSCAN database on assessing chemical carcinogenicity.

    Science.gov (United States)

    Benigni, Romualdo; Bossa, Cecilia; Richard, Ann M; Yang, Chihae

    2008-01-01

    Mutagenicity and carcinogenicity databases are crucial resources for toxicologists and regulators involved in chemicals risk assessment. Until recently, existing public toxicity databases have been constructed primarily as "look-up-tables" of existing data, and most often did not contain chemical structures. Concepts and technologies originated from the structure-activity relationships science have provided powerful tools to create new types of databases, where the effective linkage of chemical toxicity with chemical structure can facilitate and greatly enhance data gathering and hypothesis generation, by permitting: a) exploration across both chemical and biological domains; and b) structure-searchability through the data. This paper reviews the main public databases, together with the progress in the field of chemical relational databases, and presents the ISSCAN database on experimental chemical carcinogens.

  16. Databases for Assessment of Military Speech Technology Equipment. (les Bases de donnees pour l’evatuation des equipements de technologie vocale militaire)

    Science.gov (United States)

    2000-03-01

    Task Group 001 viii 1 Introduction 1 2 Military Benefit 1 3 The Database Listing 1 3.1 Structure 1 3.2 Inclusion Criteria 2 3.3 Report Formats 2 3.4...Prieur de la Crte d’Or Ciudad Universitaria 94114 Arcueil Cedex 28040 Madrid France Spain Mr. John J. Grieco Dr. Dough Reynolds AFRL/IFEC Information...details of the database structures are given in Annex A. In many cases, there is no information in some of the less important fields. 2 3.2 Inclusion

  17. Technologies for Language Assessment.

    Science.gov (United States)

    Burstein, Jill; And Others

    1996-01-01

    Reviews current and developing technology uses that are relevant to language assessment and discusses examples of recent linguistic applications from the laboratory at the Educational Testing Service. The processes of language test development are described and the functions they serve from the perspective of a large testing organization are…

  18. Photovoltaic technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Backus, C.E.

    1981-01-01

    After a brief review of the history of photovoltaic devices and a discussion of the cost goals set for photovoltaic modules, the status of photovoltaic technology is assessed. Included are discussions of: current applications, present industrial production, low-cost silicon production techniques, energy payback periods for solar cells, advanced materials research and development, concentrator systems, balance-of-system components. Also discussed are some nontechnical aspects, including foreign markets, US government program approach, and industry attitudes and approaches. (LEW)

  19. Ceramic Technology Project database: March 1990 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-07-01

    This report is the fifth in a series of semiannual data summary reports on information being stored in the Ceramic Technology Project (CTP) database. The overall system status as of March 31, 1990, is summarized, and the latest additions of ceramic mechanical properties data are given for zirconia, silicon carbide, and silicon nitride ceramic mechanical properties data, including some properties on brazed specimens.

  20. Development of a dementia assessment quality database

    DEFF Research Database (Denmark)

    Johannsen, P.; Jørgensen, Kasper; Korner, A.

    2011-01-01

    OBJECTIVE: Increased focus on the quality of health care requires tools and information to address and improve quality. One tool to evaluate and report the quality of clinical health services is quality indicators based on a clinical database. METHOD: The Capital Region of Denmark runs a quality...... database for dementia evaluation in the secondary health system. One volume and seven process quality indicators on dementia evaluations are monitored. Indicators include frequency of demented patients, percentage of patients evaluated within three months, whether the work-up included blood tests, Mini...... for the data analyses. RESULTS: The database was constructed in 2005 and covers 30% of the Danish population. Data from all consecutive cases evaluated for dementia in the secondary health system in the Capital Region of Denmark are entered. The database has shown that the basic diagnostic work-up programme...

  1. A database in ACCESS for assessing vaccine serious adverse events

    Directory of Open Access Journals (Sweden)

    Thomas RE

    2015-04-01

    Full Text Available Roger E Thomas,1 Dave Jackson2,3 1Department of Family Medicine, G012 Health Sciences Centre, University of Calgary Medical School, Calgary, AB, Canada; 2Independent Research Consultant, Calgary, AB, Canada; 3Database Consultant, University of Calgary, Calgary, AB, Canada Purpose: To provide a free flexible database for use by any researcher for assessing reports of adverse events after vaccination. Results: A database was developed in Microsoft ACCESS to assess reports of serious adverse events after yellow fever vaccination using Brighton Collaboration criteria. The database is partly automated (if data panels contain identical data fields the data are automatically also entered into those fields. The purpose is to provide the database free for developers to add additional panels to assess other vaccines. Keywords: serious adverse events after vaccination, database, process to assess vaccine-associated events 

  2. A database in ACCESS for assessing vaccine serious adverse events

    OpenAIRE

    Thomas RE; Jackson D.

    2015-01-01

    Roger E Thomas,1 Dave Jackson2,3 1Department of Family Medicine, G012 Health Sciences Centre, University of Calgary Medical School, Calgary, AB, Canada; 2Independent Research Consultant, Calgary, AB, Canada; 3Database Consultant, University of Calgary, Calgary, AB, Canada Purpose: To provide a free flexible database for use by any researcher for assessing reports of adverse events after vaccination. Results: A database was developed in Microsoft ACCESS to assess reports of serious adverse ev...

  3. High-Performance Secure Database Access Technologies for HEP Grids

    Energy Technology Data Exchange (ETDEWEB)

    Matthew Vranicar; John Weicher

    2006-04-17

    The Large Hadron Collider (LHC) at the CERN Laboratory will become the largest scientific instrument in the world when it starts operations in 2007. Large Scale Analysis Computer Systems (computational grids) are required to extract rare signals of new physics from petabytes of LHC detector data. In addition to file-based event data, LHC data processing applications require access to large amounts of data in relational databases: detector conditions, calibrations, etc. U.S. high energy physicists demand efficient performance of grid computing applications in LHC physics research where world-wide remote participation is vital to their success. To empower physicists with data-intensive analysis capabilities a whole hyperinfrastructure of distributed databases cross-cuts a multi-tier hierarchy of computational grids. The crosscutting allows separation of concerns across both the global environment of a federation of computational grids and the local environment of a physicist’s computer used for analysis. Very few efforts are on-going in the area of database and grid integration research. Most of these are outside of the U.S. and rely on traditional approaches to secure database access via an extraneous security layer separate from the database system core, preventing efficient data transfers. Our findings are shared by the Database Access and Integration Services Working Group of the Global Grid Forum, who states that "Research and development activities relating to the Grid have generally focused on applications where data is stored in files. However, in many scientific and commercial domains, database management systems have a central role in data storage, access, organization, authorization, etc, for numerous applications.” There is a clear opportunity for a technological breakthrough, requiring innovative steps to provide high-performance secure database access technologies for grid computing. We believe that an innovative database architecture where the

  4. DIMA quick start, database for inventory, monitoring and assessment

    Science.gov (United States)

    The Database for Inventory, Monitoring and Assessment (DIMA) is a highly-customized Microsoft Access database for collecting data electronically in the field and for organizing, storing and reporting those data for monitoring and assessment. While DIMA can be used for any number of different monito...

  5. Examining the Factors That Contribute to Successful Database Application Implementation Using the Technology Acceptance Model

    Science.gov (United States)

    Nworji, Alexander O.

    2013-01-01

    Most organizations spend millions of dollars due to the impact of improperly implemented database application systems as evidenced by poor data quality problems. The purpose of this quantitative study was to use, and extend, the technology acceptance model (TAM) to assess the impact of information quality and technical quality factors on database…

  6. Technology assessment heat pumps

    Energy Technology Data Exchange (ETDEWEB)

    Rudolph, R.; Purper, G. (Battelle-Institut e.V., Frankfurt am Main (Germany, F.R.))

    Technology assessment for an increased application of heat pumps is carried out in four areas: Effects in the economics area, i.e. effects on the economic goals which are defined in the Stability Law, on the goals of the power supply policy which result from the energy programme and its projections, and on the economic structure as a whole. The whole range of social problems concerning the use of heat pumps, i.e. the questions which social groups are affected, how they react, and what consequences are they expected to have on energy conservation as an object of social policy. Consequences in the governmental and administrative sectors, i.e. effects on legislation, administration and government budgets. Effects on the ecological systems; of prime interest in this context are the utilisation of environmental energy, changes in the heat balance, and emmission of pollutants.

  7. Technologies Assessing Limb Bradykinesia in Parkinson's Disease.

    Science.gov (United States)

    Hasan, Hasan; Athauda, Dilan S; Foltynie, Thomas; Noyce, Alastair J

    2017-01-01

    The MDS-UPDRS (Movement Disorders Society - Unified Parkinson's Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development.

  8. Environmental Monitoring and Assessment Program (EMAP) National Coastal Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Environmental Monitoring and Assessment Program (EMAP) National Coastal Database contains estuarine and coastal data that EMAP and Regional-EMAP have collected...

  9. Technology Performance Level Assessment Methodology.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph; Costello, Ronan Patrick; Aurelien Babarit; Kim Nielsen; Claudio Bittencourt Ferreira; Ben Kennedy; Kathryn Dykes; Jochem Weber

    2017-04-01

    The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within the TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.

  10. Application of XML database technology to biological pathway datasets.

    Science.gov (United States)

    Jiang, Keyuan; Nash, Christopher

    2006-01-01

    The study of biological systems has accumulated a significant amount of biological pathway data, which is evident through the continued growth in both the number of databases and amount of data available. The development of BioPAX standard leads to the increased availability of biological pathway datasets through the use of a special XML format, but the lack of standard storage mechanism makes the querying and aggregation of BioPAX compliant data challenging. To address this shortcoming, we have developed a storage mechanism leveraging the existing XML technologies: the XML database and XQuery. The goal of our project is to provide a generic and centralized store with efficient queries for the needs of biomedical research. A SOAP-based Web service and direct HTTP request methods have also developed to facilitate public consumption of the datasets online.

  11. USGS Oil and Gas Assessment Database

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey (USGS) has assessed undiscovered oil and natural gas potential for 212 geological provinces throughout the world as part of the US Oil and...

  12. XML Technology Assessment

    Science.gov (United States)

    2001-01-01

    approach to integration. Key to the integrated system is a language, termed a multilanguage , through which the integrated data is defined and manipulated...The multilanguage is a unified language that serves as both a data definition and data manipulation tool. The multilanguage is defined in terms of... multilanguage . Virtual classes are used to express relationships among basic classes and methods of pre-existing databases, and to resolve conflicts between

  13. Melter Technologies Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Perez, J.M. Jr. [Pacific Northwest National Lab., Richland, WA (United States); Schumacher, R.F. [Savannah River Technology Center, Aiken, SC (United States); Forsberg, C.W. [Oak Ridge National Lab., TN (United States)

    1996-05-01

    The problem of controlling and disposing of surplus fissile material, in particular plutonium, is being addressed by the US Department of Energy (DOE). Immobilization of plutonium by vitrification has been identified as a promising solution. The Melter Evaluation Activity of DOE`s Plutonium Immobilization Task is responsible for evaluating and selecting the preferred melter technologies for vitrification for each of three immobilization options: Greenfield Facility, Adjunct Melter Facility, and Can-In-Canister. A significant number of melter technologies are available for evaluation as a result of vitrification research and development throughout the international communities for over 20 years. This paper describes an evaluation process which will establish the specific requirements of performance against which candidate melter technologies can be carefully evaluated. Melter technologies that have been identified are also described.

  14. Turbine imaging technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Moursund, R. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  15. Superconducting Technology Assessment

    Science.gov (United States)

    2005-08-01

    of Nb/Al- Nx /NbTiN junctions for SIS mixer applications,” IEEE Trans. Appl. Superconduct., vol. 11, pp. 76–79, Mar. 2001. [48] M. Gurvitch, W. A...Another connector developed by IBM for commercial applications using a dendritic interposer technology. A “beam-on-pad” approach developed by Siemens

  16. Ceramic Technology Project database: March 1990 summary report. DOE/ORNL Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-07-01

    This report is the fifth in a series of semiannual data summary reports on information being stored in the Ceramic Technology Project (CTP) database. The overall system status as of March 31, 1990, is summarized, and the latest additions of ceramic mechanical properties data are given for zirconia, silicon carbide, and silicon nitride ceramic mechanical properties data, including some properties on brazed specimens.

  17. Summary of Web-Database Technologies%Web数据库技术综述

    Institute of Scientific and Technical Information of China (English)

    周军

    2000-01-01

    Web-Database is the base of many network applications such as Web information retrieval system, Web information publishing and Electronic Commerce. This article focuses on several popular Web-Database technologies such as CGI, ISAPI, IDC, ASP and Java Applet, analyzing and comparing their structure, characteristics, advantages and disadvantages. Finally, it discusses the main structure of the Web-Database technology.

  18. A Novel Approach: Chemical Relational Databases, and the Role of the ISSCAN Database on Assessing Chemical Carcinogenity

    Science.gov (United States)

    Mutagenicity and carcinogenicity databases are crucial resources for toxicologists and regulators involved in chemicals risk assessment. Until recently, existing public toxicity databases have been constructed primarily as "look-up-tables" of existing data, and most often did no...

  19. Assessing Advanced Technology in CENATE

    Energy Technology Data Exchange (ETDEWEB)

    Tallent, Nathan R.; Barker, Kevin J.; Gioiosa, Roberto; Marquez, Andres; Kestor, Gokcen; Song, Shuaiwen; Tumeo, Antonino; Kerbyson, Darren J.; Hoisie, Adolfy

    2016-08-08

    PNNL's Center for Advanced Technology Evaluation (CENATE) is a new U.S. Department of Energy center whose mission is to assess and facilitate access to emerging computing technology. CENATE is assessing a range of advanced technologies, from evolutionary to disruptive. Technologies of interest include the processor socket (homogeneous and accelerated systems), memories (dynamic, static, memory cubes), motherboards, networks (network interface cards and switches), and input/output and storage devices. CENATE is developing a multi-perspective evaluation process based on integrating advanced system instrumentation, performance measurements, and modeling and simulation. We show evaluations of two emerging network technologies: silicon photonics interconnects and the Data Vortex network. CENATE's evaluation also addresses the question of which machine is best for a given workload under certain constraints. We show a performance-power tradeoff analysis of a well-known machine learning application on two systems.

  20. Is the planned and ongoing project (POP) database a suitable tool to reduce duplication in the process of assessing new health technologies in the European Union? Preliminary experience in the context of the EUnetHTA Joint Action Project Framework (2010-2012).

    Science.gov (United States)

    Vondeling, Hindrik; Sandvei, Marianne

    2014-11-01

    The European Network for Health Technology Assessment (EUnetHTA) Joint Action Project Framework, 2010-12, Work Package 7B (WP 7B), was aimed at facilitating collaboration between HTA agencies to avoid duplication of assessment efforts. A major task of WP 7B was to collect information on planned and ongoing (POP) projects by EUnetHTA agencies and to incorporate this information in a POP Database. We analyzed whether the Database served its intended purpose. A survey was sent to all fifty-seven EUnetHTA partners, complemented by telephone interviews with the Ludwig Boltzmann Institute of HTA in Austria (lead institution). Furthermore, detailed documentation on the activities of the POP Database was provided to the research team at CAST (University of Southern Denmark) by the lead institution. Forty-two of fifty-seven agencies (74 percent) responded to the survey. Eleven collaborations initiated by agencies themselves were reported. The scope of these collaborative activities was usually limited to information exchange on for example literature search protocols. A slight reduction of duplication of effort was documented. In addition, twelve collaborations at the full report level were initiated by the lead institution. While the POP Database has the potential to reduce duplication of effort, this has not been realized during the 3-year period of the EUnetHTA Joint Action Project Framework, 2010-12. Further evidence needs to be gathered to determine whether the POP Database is effective and whether the benefits outweigh the resources required to maintain it.

  1. Databases

    Data.gov (United States)

    National Aeronautics and Space Administration — The databases of computational and experimental data from the first Aeroelastic Prediction Workshop are located here. The databases file names tell their contents by...

  2. Ceramics Technology Project database: September 1991 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    The piston ring-cylinder liner area of the internal combustion engine must withstand very-high-temperature gradients, highly-corrosive environments, and constant friction. Improving the efficiency in the engine requires ring and cylinder liner materials that can survive this abusive environment and lubricants that resist decomposition at elevated temperatures. Wear and friction tests have been done on many material combinations in environments similar to actual use to find the right materials for the situation. This report covers tribology information produced from 1986 through July 1991 by Battelle columbus Laboratories, Caterpillar Inc., and Cummins Engine Company, Inc. for the Ceramic Technology Project (CTP). All data in this report were taken from the project`s semiannual and bimonthly progress reports and cover base materials, coatings, and lubricants. The data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies, but not to draw conclusions from these data.

  3. Applications of GIS and database technologies to manage a Karst Feature Database

    Science.gov (United States)

    Gao, Y.; Tipping, R.G.; Alexander, E.C.

    2006-01-01

    This paper describes the management of a Karst Feature Database (KFD) in Minnesota. Two sets of applications in both GIS and Database Management System (DBMS) have been developed for the KFD of Minnesota. These applications were used to manage and to enhance the usability of the KFD. Structured Query Language (SQL) was used to manipulate transactions of the database and to facilitate the functionality of the user interfaces. The Database Administrator (DBA) authorized users with different access permissions to enhance the security of the database. Database consistency and recovery are accomplished by creating data logs and maintaining backups on a regular basis. The working database provides guidelines and management tools for future studies of karst features in Minnesota. The methodology of designing this DBMS is applicable to develop GIS-based databases to analyze and manage geomorphic and hydrologic datasets at both regional and local scales. The short-term goal of this research is to develop a regional KFD for the Upper Mississippi Valley Karst and the long-term goal is to expand this database to manage and study karst features at national and global scales.

  4. Databases

    Directory of Open Access Journals (Sweden)

    Nick Ryan

    2004-01-01

    Full Text Available Databases are deeply embedded in archaeology, underpinning and supporting many aspects of the subject. However, as well as providing a means for storing, retrieving and modifying data, databases themselves must be a result of a detailed analysis and design process. This article looks at this process, and shows how the characteristics of data models affect the process of database design and implementation. The impact of the Internet on the development of databases is examined, and the article concludes with a discussion of a range of issues associated with the recording and management of archaeological data.

  5. The research of network database security technology based on web service

    Science.gov (United States)

    Meng, Fanxing; Wen, Xiumei; Gao, Liting; Pang, Hui; Wang, Qinglin

    2013-03-01

    Database technology is one of the most widely applied computer technologies, its security is becoming more and more important. This paper introduced the database security, network database security level, studies the security technology of the network database, analyzes emphatically sub-key encryption algorithm, applies this algorithm into the campus-one-card system successfully. The realization process of the encryption algorithm is discussed, this method is widely used as reference in many fields, particularly in management information system security and e-commerce.

  6. Open source database of images DEIMOS: extension for large-scale subjective image quality assessment

    Science.gov (United States)

    Vítek, Stanislav

    2014-09-01

    DEIMOS (Database of Images: Open Source) is an open-source database of images and video sequences for testing, verification and comparison of various image and/or video processing techniques such as compression, reconstruction and enhancement. This paper deals with extension of the database allowing performing large-scale web-based subjective image quality assessment. Extension implements both administrative and client interface. The proposed system is aimed mainly at mobile communication devices, taking into account advantages of HTML5 technology; it means that participants don't need to install any application and assessment could be performed using web browser. The assessment campaign administrator can select images from the large database and then apply rules defined by various test procedure recommendations. The standard test procedures may be fully customized and saved as a template. Alternatively the administrator can define a custom test, using images from the pool and other components, such as evaluating forms and ongoing questionnaires. Image sequence is delivered to the online client, e.g. smartphone or tablet, as a fully automated assessment sequence or viewer can decide on timing of the assessment if required. Environmental data and viewing conditions (e.g. illumination, vibrations, GPS coordinates, etc.), may be collected and subsequently analyzed.

  7. NoSQL technologies for the CMS Conditions Database

    Science.gov (United States)

    Sipos, Roland

    2015-12-01

    With the restart of the LHC in 2015, the growth of the CMS Conditions dataset will continue, therefore the need of consistent and highly available access to the Conditions makes a great cause to revisit different aspects of the current data storage solutions. We present a study of alternative data storage backends for the Conditions Databases, by evaluating some of the most popular NoSQL databases to support a key-value representation of the CMS Conditions. The definition of the database infrastructure is based on the need of storing the conditions as BLOBs. Because of this, each condition can reach the size that may require special treatment (splitting) in these NoSQL databases. As big binary objects may be problematic in several database systems, and also to give an accurate baseline, a testing framework extension was implemented to measure the characteristics of the handling of arbitrary binary data in these databases. Based on the evaluation, prototypes of a document store, using a column-oriented and plain key-value store, are deployed. An adaption layer to access the backends in the CMS Offline software was developed to provide transparent support for these NoSQL databases in the CMS context. Additional data modelling approaches and considerations in the software layer, deployment and automatization of the databases are also covered in the research. In this paper we present the results of the evaluation as well as a performance comparison of the prototypes studied.

  8. Use of technology in children's dietary assessment.

    Science.gov (United States)

    Boushey, C J; Kerr, D A; Wright, J; Lutes, K D; Ebert, D S; Delp, E J

    2009-02-01

    Information on dietary intake provides some of the most valuable insights for mounting intervention programmes for the prevention of chronic diseases. With the growing concern about adolescent overweight, the need to accurately measure diet becomes imperative. Assessment among adolescents is problematic as this group has irregular eating patterns and they have less enthusiasm for recording food intake. We used qualitative and quantitative techniques among adolescents to assess their preferences for dietary assessment methods. Dietary assessment methods using technology, for example, a personal digital assistant (PDA) or a disposable camera, were preferred over the pen and paper food record. There was a strong preference for using methods that incorporate technology such as capturing images of food. This suggests that for adolescents, dietary methods that incorporate technology may improve cooperation and accuracy. Current computing technology includes higher resolution images, improved memory capacity and faster processors that allow small mobile devices to process information not previously possible. Our goal is to develop, implement and evaluate a mobile device (for example, PDA, mobile phone) food record that will translate to an accurate account of daily food and nutrient intake among adolescents. This mobile computing device will include digital images, a nutrient database and image analysis for identification and quantification of food consumption. Mobile computing devices provide a unique vehicle for collecting dietary information that reduces the burden on record keepers. Images of food can be marked with a variety of input methods that link the item for image processing and analysis to estimate the amount of food. Images before and after the foods are eaten can estimate the amount of food consumed. The initial stages and potential of this project will be described.

  9. Augmented Reality Tower Technology Assessment

    Science.gov (United States)

    Reisman, Ronald J.; Brown, David M.

    2009-01-01

    Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

  10. Health technology assessment in Singapore.

    Science.gov (United States)

    Pwee, Keng Ho

    2009-07-01

    The Republic of Singapore is an island city-state in Southeast Asia. Its population enjoys good health and the Singapore Ministry of Health's mission is to promote good health and reduce illness, ensure access to good and affordable health care, and pursue medical excellence. This is achieved through a healthcare system that includes both private and public sector elements. The financing philosophy of Singapore's healthcare delivery system is based on individual responsibility and community support. Health care in Singapore is financed by a combination of taxes, employee medical benefits, compulsory health savings, insurance, and out-of-pocket payment. The capability for health technology assessment in Singapore was developed concurrently with its medical device regulation system in the 1990s. The first formal unit with health technology assessment (HTA) functions was established in September 1995. Today, HTA features in decision making for the Standard Drug List, licensing of medical clinics, the Health Service Development Programme, healthcare subsidies, and policy development. The public sector healthcare delivery clusters have also recently started health services research units with HTA functions. Singapore is organizing the 6th Health Technology Assessment International (HTAi) Annual Meeting in June 2009. Bringing this prestigious international conference to Asia for the first time will help raise awareness of HTA in the region.

  11. Assessment of federal databases to evaluate agroecosystem productivity

    Energy Technology Data Exchange (ETDEWEB)

    Olson, G.L.; Breckenridge, R.P.; Wiersma, G.B.

    1990-02-01

    Ecological monitoring data that could provide indications of agroecosystem condition, such as soil microbial biomass, biodiversity in the patches or mineralizable-N, are not available on a national scale. This paper discusses the economists' and ecologists' approach to assessing agroecosystem productivity, and the data available to make ecological assessments of agroecosystems on a national level. Models and indices of productivity used by ecologists and economists are briefly discussed in the context of agricultural inputs and outputs. Databases on production, pesticides, fertilizers, water use, water and air quality, land use, soil, labor and machinery are evaluated for their ability to make national trend assessments on how this ecosystem responds to stress. 39 refs., 3 figs., 3 tabs.

  12. HEALTH TECHNOLOGY ASSESSMENT ON CERVICAL CANCER SCREENING, 2000–2014

    OpenAIRE

    Lahue, Betsy J.; Baginska, Eva; Li, Sophia S.; Parisi, Monika

    2015-01-01

    Objectives: The aim of this study was to conduct a review of health technology assessments (HTAs) in cervical cancer screening to highlight the most common metrics HTA agencies use to evaluate and recommend cervical cancer screening technologies. Methods: The Center for Reviews and Dissemination (CRD), MedLine, and national HTA agency databases were searched using keywords (“cervical cancer screening” OR “cervical cancer” OR “cervical screening”) and “HTA” from January 2000 to October 2014. N...

  13. NoSQL technologies for the CMS Conditions Database

    CERN Document Server

    Sipos, Roland

    2015-01-01

    With the restart of the LHC in 2015, the growth of the CMS Conditions dataset will continue, therefore the need of consistent and highly available access to the Conditions makes a great cause to revisit different aspects of the current data storage solutions.We present a study of alternative data storage backends for the Conditions Databases, by evaluating some of the most popular NoSQL databases to support a key-value representation of the CMS Conditions. An important detail about the Conditions that the payloads are stored as BLOBs, and they can reach sizes that may require special treatment (splitting) in these NoSQL databases. As big binary objects may be a bottleneck in several database systems, and also to give an accurate baseline, a testing framework extension was implemented to measure the characteristics of the handling of arbitrary binary data in these databases. Based on the evaluation, prototypes of a document store, using a column-oriented and plain key-value store, are deployed. An adaption l...

  14. Health technology assessment in Mexico.

    Science.gov (United States)

    Gómez-Dantés, Octavio; Frenk, Julio

    2009-07-01

    The history of health technology assessment (HTA) in Mexico is examined, starting with the efforts to incorporate this topic into the policy agenda and culminating with the recent creation of a specialized public agency. Information was gathered through a bibliographic search and interviews with actors involved in HTA in Mexico. HTA efforts were developed in Mexico since the mid-1980s with the participation both of academics and of policy makers, a relationship that eventually led to the creation of the Center for Technological Excellence within the Ministry of Health. Institutionalization of HTA in resource-constrained settings requires the development of a critical mass of researchers involved in this field, the implementation of information efforts, and the establishment of strong relationships between HTA experts and policy makers.

  15. Technology Assessment Report: Aqueous Sludge Gasification Technologies

    Science.gov (United States)

    The study reveals that sludge gasification is a potentially suitable alternative to conventional sludge handling and disposal methods. However, very few commercial operations are in existence. The limited pilot, demonstration or commercial application of gasification technology t...

  16. Evaluation and Assessment in Educational Information Technology.

    Science.gov (United States)

    Liu, Leping, Ed.; Johnson, D. LaMont, Ed.; Maddux, Cleborne D., Ed.; Henderson, Norma J., Ed.

    This book contains the following articles on evaluating and assessing educational information technology: (1) "Assessing Learning in the New Age of Information Technology in Education" (Leping Liu, D. LaMont Johnson, Cleborne D. Maddux, and Norma J. Henderson); (2) "Instruments for Assessing the Impact of Technology in Education" (Rhonda…

  17. HVDC power transmission technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hauth, R.L.; Tatro, P.J.; Railing, B.D. [New England Power Service Co., Westborough, MA (United States); Johnson, B.K.; Stewart, J.R. [Power Technologies, Inc., Schenectady, NY (United States); Fink, J.L.

    1997-04-01

    The purpose of this study was to develop an assessment of the national utility system`s needs for electric transmission during the period 1995-2020 that could be met by future reduced-cost HVDC systems. The assessment was to include an economic evaluation of HVDC as a means for meeting those needs as well as a comparison with competing technologies such as ac transmission with and without Flexible AC Transmission System (FACTS) controllers. The role of force commutated dc converters was to be assumed where appropriate. The assessment begins by identifying the general needs for transmission in the U.S. in the context of a future deregulated power industry. The possible roles for direct current transmission are then postulated in terms of representative scenarios. A few of the scenarios are illustrated with the help of actual U.S. system examples. non-traditional applications as well as traditional applications such as long lines and asynchronous interconnections are discussed. The classical ``break-even distance`` concept for comparing HVDC and ac lines is used to assess the selected scenarios. The impact of reduced-cost converters is reflected in terms of the break-even distance. This report presents a comprehensive review of the functional benefits of HVDC transmission and updated cost data for both ac and dc system components. It also provides some provocative thoughts on how direct current transmission might be applied to better utilize and expand our nation`s increasingly stressed transmission assets.

  18. Technology modernization assessment flexible automation

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, D.W.; Boyd, D.R.; Hansen, N.H.; Hansen, M.A.; Yount, J.A.

    1990-12-01

    The objectives of this report are: to present technology assessment guidelines to be considered in conjunction with defense regulations before an automation project is developed to give examples showing how assessment guidelines may be applied to a current project to present several potential areas where automation might be applied successfully in the depot system. Depots perform primarily repair and remanufacturing operations, with limited small batch manufacturing runs. While certain activities (such as Management Information Systems and warehousing) are directly applicable to either environment, the majority of applications will require combining existing and emerging technologies in different ways, with the special needs of depot remanufacturing environment. Industry generally enjoys the ability to make revisions to its product lines seasonally, followed by batch runs of thousands or more. Depot batch runs are in the tens, at best the hundreds, of parts with a potential for large variation in product mix; reconfiguration may be required on a week-to-week basis. This need for a higher degree of flexibility suggests a higher level of operator interaction, and, in turn, control systems that go beyond the state of the art for less flexible automation and industry in general. This report investigates the benefits and barriers to automation and concludes that, while significant benefits do exist for automation, depots must be prepared to carefully investigate the technical feasibility of each opportunity and the life-cycle costs associated with implementation. Implementation is suggested in two ways: (1) develop an implementation plan for automation technologies based on results of small demonstration automation projects; (2) use phased implementation for both these and later stage automation projects to allow major technical and administrative risk issues to be addressed. 10 refs., 2 figs., 2 tabs. (JF)

  19. Data-Base Software For Tracking Technological Developments

    Science.gov (United States)

    Aliberti, James A.; Wright, Simon; Monteith, Steve K.

    1996-01-01

    Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

  20. Finding Qualitative Research Evidence for Health Technology Assessment.

    Science.gov (United States)

    DeJean, Deirdre; Giacomini, Mita; Simeonov, Dorina; Smith, Andrea

    2016-08-01

    Health technology assessment (HTA) agencies increasingly use reviews of qualitative research as evidence for evaluating social, experiential, and ethical aspects of health technologies. We systematically searched three bibliographic databases (MEDLINE, CINAHL, and Social Science Citation Index [SSCI]) using published search filters or "hedges" and our hybrid filter to identify qualitative research studies pertaining to chronic obstructive pulmonary disease and early breast cancer. The search filters were compared in terms of sensitivity, specificity, and precision. Our screening by title and abstract revealed that qualitative research constituted only slightly more than 1% of all published research on each health topic. The performance of the published search filters varied greatly across topics and databases. Compared with existing search filters, our hybrid filter demonstrated a consistently high sensitivity across databases and topics, and minimized the resource-intensive process of sifting through false positives. We identify opportunities for qualitative health researchers to improve the uptake of qualitative research into evidence-informed policy making.

  1. Technology-assisted dietary assessment

    Science.gov (United States)

    Zhu, Fengqing; Mariappan, Anand; Boushey, Carol J.; Kerr, Deb; Lutes, Kyle D.; Ebert, David S.; Delp, Edward J.

    2008-02-01

    Dietary intake provides valuable insights for mounting intervention programs for prevention of disease. With growing concern for adolescent obesity, the need to accurately measure diet becomes imperative. Assessment among adolescents is problematic as this group has irregular eating patterns and have less enthusiasm for recording food intake. Preliminary studies among adolescents suggest that innovative use of technology may improve the accuracy of diet information from young people. In this paper, we propose a novel food record method using a mobile device that will provide an accurate account of daily food and nutrient intake among adolescents. Our approach includes the use of image analysis tools for identification and quantification of food consumption. Images obtained before and after food is consumed can be used to estimate the diet of an individual. In this paper we describe our initial results and indicate the potential of the proposed system.

  2. National Levee Database: monitoring, vulnerability assessment and management in Italy

    Science.gov (United States)

    Barbetta, Silvia; Camici, Stefania; Maccioni, Pamela; Moramarco, Tommaso

    2015-04-01

    Italian levees and historical breach failures to be exploited in the framework of an operational procedure addressed to the seepage vulnerability assessment of river reaches where the levee system is an important structural measure against flooding. For its structure, INLED is a dynamic geospatial database with ongoing efforts to add levee data from authorities with the charge of hydraulic risk mitigation. In particular, the database is aimed to provide the available information about: i) location and condition of levees; ii) morphological and geometrical properties; iii) photographic documentation; iv) historical levee failures; v) assessment of vulnerability to overtopping and seepage carried out through a procedure based on simple vulnerability indexes (Camici et al. 2014); vi) management, control and maintenance; vii)flood hazard maps developed by assuming the levee system undamaged/damaged during the flood event. Currently, INLED contains data of levees that are mostly located in the Tiber basin, Central Italy. References Apel H., Merz B. & Thieken A.H. Quantification of uncertainties in flood risk assessments. Int J River Basin Manag 2008, 6, (2), 149-162. Camici S,, Barbetta S., Moramarco T., Levee body vulnerability to seepage: the case study of the levee failure along the Foenna stream on 1st January 2006 (central Italy)", Journal of Flood Risk Management, in press. Colleselli F. Geotechnical problems related to river and channel embankments. Rotterdam, the Netherlands: Springer, 1994. H. R.Wallingford Consultants (HRWC). Risk assessment for flood and coastal defence for strategic planning: high level methodology technical report, London, 2003. Mazzoleni M., Bacchi B., Barontini S., Di Baldassarre G., Pilotti M. & Ranzi R. Flooding hazard mapping in floodplain areas affected by piping breaches in the Po River, Italy. J Hydrol Eng 2014, 19, (4), 717-731.

  3. [Construction and application of special analysis database of geoherbs based on 3S technology].

    Science.gov (United States)

    Guo, Lan-ping; Huang, Lu-qi; Lv, Dong-mei; Shao, Ai-juan; Wang, Jian

    2007-09-01

    In this paper,the structures, data sources, data codes of "the spacial analysis database of geoherbs" based 3S technology are introduced, and the essential functions of the database, such as data management, remote sensing, spacial interpolation, spacial statistics, spacial analysis and developing are described. At last, two examples for database usage are given, the one is classification and calculating of NDVI index of remote sensing image in geoherbal area of Atractylodes lancea, the other one is adaptation analysis of A. lancea. These indicate that "the spacial analysis database of geoherbs" has bright prospect in spacial analysis of geoherbs.

  4. Urban flood risk assessment using sewer flooding databases.

    Science.gov (United States)

    Caradot, Nicolas; Granger, Damien; Chapgier, Jean; Cherqui, Frédéric; Chocat, Bernard

    2011-01-01

    Sustainable water management is a global challenge for the 21st century. One key aspect remains protection against urban flooding. The main objective is to ensure or maintain an adequate level of service for all inhabitants. However, level of service is still difficult to assess and the high-risk locations difficult to identify. In this article, we propose a methodology, which (i) allows water managers to measure the service provided by the urban drainage system with regard to protection against urban flooding; and (ii) helps stakeholders to determine effective strategies for improving the service provided. One key aspect of this work is to use a database of sewer flood event records to assess flood risk. Our methodology helps urban water managers to assess the risk of sewer flooding; this approach does not seek to predict flooding but rather to inform decision makers on the current level of risk and on actions which need to be taken to reduce the risk. This work is based on a comprehensive definition of risk, including territorial vulnerability and perceptions of urban water stakeholders. This paper presents the results and the methodological contributions from implementing the methodology on two case studies: the cities of Lyon and Mulhouse.

  5. Development of Integrated PSA Database and Application Technology

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sang Hoon; Park, Jin Hee; Kim, Seung Hwan; Choi, Sun Yeong; Jung, Woo Sik; Jeong, Kwang Sub; Ha Jae Joo; Yang, Joon Eon; Min Kyung Ran; Kim, Tae Woon

    2005-04-15

    The purpose of this project is to develop 1) the reliability database framework, 2) the methodology for the reactor trip and abnormal event analysis, and 3) the prototype PSA information DB system. We already have a part of the reactor trip and component reliability data. In this study, we extend the collection of data up to 2002. We construct the pilot reliability database for common cause failure and piping failure data. A reactor trip or a component failure may have an impact on the safety of a nuclear power plant. We perform the precursor analysis for such events that occurred in the KSNP, and to develop a procedure for the precursor analysis. A risk monitor provides a mean to trace the changes in the risk following the changes in the plant configurations. We develop a methodology incorporating the model of secondary system related to the reactor trip into the risk monitor model. We develop a prototype PSA information system for the UCN 3 and 4 PSA models where information for the PSA is inputted into the system such as PSA reports, analysis reports, thermal-hydraulic analysis results, system notebooks, and so on. We develop a unique coherent BDD method to quantify a fault tree and the fastest fault tree quantification engine FTREX. We develop quantification software for a full PSA model and a one top model.

  6. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Larisa Alexejevna Ismagilova

    2016-12-01

    Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

  7. VATE: VAlidation of high TEchnology based on large database analysis by learning machine

    NARCIS (Netherlands)

    Meldolesi, E; Van Soest, J; Alitto, A R; Autorino, R; Dinapoli, N; Dekker, A; Gambacorta, M A; Gatta, R; Tagliaferri, L; Damiani, A; Valentini, V

    2014-01-01

    The interaction between implementation of new technologies and different outcomes can allow a broad range of researches to be expanded. The purpose of this paper is to introduce the VAlidation of high TEchnology based on large database analysis by learning machine (VATE) project that aims to combine

  8. Science and Technology Text Mining: Origins of Database Tomography and Multi-Word Phrase Clustering

    Science.gov (United States)

    2003-08-15

    for Technical Intelligence: Analysis of the Research Impact Assessment Literature", Competitive Intelligence Review, 8:2, Summer 1997. Kostoff...S. Patent Number 5440481, August 8, 1995. Kostoff, R.N., "Database Tomography: Origins and Applications," Competitive Intelligence Review...Conference of the Society for Competitive Intelligence Professionals, Los Angeles, CA 1993. Kostoff, R. N., "Database Tomography for Technical

  9. Modelling in Medical Technology Assessment

    NARCIS (Netherlands)

    B.C. Michel (Bowine)

    1996-01-01

    textabstractHealth care is a rapidly developing field in which new technologies are introduced continuously. Not all new technologies have the same impact however: most represent only small changes in existing technologies, whereas only a few - like organ transplants - really are revolutionary new d

  10. Liquefaction technology assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    A survey of coal liquefaction technology and analysis of projected relative performance of high potential candidates has been completed and the results are reported here. The key objectives of the study included preparation of a broad survey of the status of liquefaction processes under development, selection of a limited number of high potential process candidates for further study, and an analysis of the relative commercial potential of these candidates. Procedures which contributed to the achievement of the above key goals included definition of the characteristics and development status of known major liquefaction process candidates, development of standardized procedures for assessing technical, environmental, economic and product characteristics for the separate candidates, and development of procedures for selecting and comparing high potential processes. The comparisons were made for three production areas and four marketing areas of the US. In view of the broad scope of the objectives the survey was a limited effort. It used the experience gained during preparation of seven comprehensive conceptual designs/economic evaluations plus comprehensive reviews of the designs, construction and operation of several pilot plants. Results and conclusions must be viewed in the perspective of the information available, how this information was treated, and the full context of the economic comparison results. Comparative economics are presented as ratios; they are not intended to be predictors of absolute values. Because the true cost of constructing and operating large coal conversion facilities will be known only after commercialization, relative values are considered more appropriate. (LTN)

  11. Technologies Assessing Limb Bradykinesia in Parkinson’s Disease

    Science.gov (United States)

    Hasan, Hasan; Athauda, Dilan S.; Foltynie, Thomas; Noyce, Alastair J.

    2017-01-01

    Background: The MDS-UPDRS (Movement Disorders Society – Unified Parkinson’s Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. Objective: To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. Methods: A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. Results: 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Conclusion: Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development. PMID:28222539

  12. Ceramic Technology Project database: September 1993 summary report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1994-01-01

    Data presented in this report represent an intense effort to improve processing methods, testing methods, and general mechanical properties of candidate ceramics for use in advanced heat engines. Materials discussed include GN-10, GS-44, GTE PY6, NT-154, NT-164, sintered-reaction-bonded silicon nitrides, silicon nitride combined with rare-earth oxides, NT-230, Hexoloy SX-G1, Dow Corning`s {beta}-Si{sub 3}N{sub 4}, and a few whisker-reinforced ceramic composites. Information in this report was taken from the project`s semiannual and bimonthly progress reports and from final reports summarizing the results of individual studies. Test results are presented in tabular form and in graphs. All data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies but not to draw conclusions from those data.

  13. Development of an Expanded, High Reliability Cost and Performance Database for In Situ Remediation Technologies

    Science.gov (United States)

    2016-03-01

    large investment in groundwater remediation technologies more effective, end-users need quantitative, accurate, and reliable performance and cost ... technologies . The overall objective of this work was to develop a comprehensive remediation performance and cost database. N/A U U U UU 42 Travis...end-users need quantitative, accurate, and reliable performance and cost data for commonly used remediation technologies . While the data from an

  14. An Updating System for the Gridded Population Database of China Based on Remote Sensing, GIS and Spatial Database Technologies

    Directory of Open Access Journals (Sweden)

    Xiaohuan Yang

    2009-02-01

    Full Text Available The spatial distribution of population is closely related to land use and land cover (LULC patterns on both regional and global scales. Population can be redistributed onto geo-referenced square grids according to this relation. In the past decades, various approaches to monitoring LULC using remote sensing and Geographic Information Systems (GIS have been developed, which makes it possible for efficient updating of geo-referenced population data. A Spatial Population Updating System (SPUS is developed for updating the gridded population database of China based on remote sensing, GIS and spatial database technologies, with a spatial resolution of 1 km by 1 km. The SPUS can process standard Moderate Resolution Imaging Spectroradiometer (MODIS L1B data integrated with a Pattern Decomposition Method (PDM and an LULC-Conversion Model to obtain patterns of land use and land cover, and provide input parameters for a Population Spatialization Model (PSM. The PSM embedded in SPUS is used for generating 1 km by 1 km gridded population data in each population distribution region based on natural and socio-economic variables. Validation results from finer township-level census data of Yishui County suggest that the gridded population database produced by the SPUS is reliable.

  15. Social Shaping in Danish Technology Assessment

    DEFF Research Database (Denmark)

    Hansen, Anne Grethe; Clausen, Christian

    2003-01-01

    for technology policy initiatives at the beginning of the new millennium, as prerequisites for socially feasible and desirable technology development and innovation. On the basis of the Danish technology assessments of the 1980s, it is argued that technology assessments and the social shaping perspectives...... in these projects contributed to new insights into the processes of technological change and thus to policy formulation. The social shaping perspective and technology assessment experiences are suggested as important guides to future technology strategies.......The term ‘social shaping of technology’ has been used broadly as a response to techno-economic deterministic understandings of the relations between technology and society. Social shaping has brought together analysts from different backgrounds who share a common interest in the role of social...

  16. Dynamical controls on estuarine bathymetry: Assessment against UK database

    Science.gov (United States)

    Prandle, David

    2006-06-01

    New theories for estuarine bathymetry provide formulations for: (1) depth at the mouth, D versus river flow, Q; (2) tidal intrusion length L versus D and Z (tidal amplitude) and (3) a zone of morphological existence, delineated on a framework of Z versus D. Here, these theories are assessed against a database for 80 UK estuaries. Overall there is good agreement between theory and observations for the sizes and shapes of estuaries classified as either 'Coastal Plain' or 'Bar Built'. Likewise, most estuaries are shown to lie within the theoretical 'zone of bathymetric existence'. These encouraging agreements enable the theories to be used to: (1) enhance our understanding of existing morphologies, (2) identify anomalous estuaries and (3) make future predictions regarding likely impacts from global climate change and related management scenarios. Subsequent examination of regional historical patterns of morphological evolution, introducing detailed local knowledge, should help to explain these anomalies and refine the new theories. By 2100, we anticipate changes in UK estuaries due to ('precautionary') projected 25% changes in river flow of: Order (0.5-5 km) in lengths and Order (50-250 m) in breadths. Corresponding changes due to a projected sea level rise of 50 cm are increases in both lengths of Order (1-2.5 km) and breadths of Order (70-100 m). In both cases, the bigger changes will occur in larger estuaries.

  17. Establishment of Health Technology Assessment in Iran

    Directory of Open Access Journals (Sweden)

    Shila Doaee

    2012-06-01

    Full Text Available Objective: Health Technology Assessment (HTA aims at informing healthcare policymakers, managers and practitioners of the "clinical consequences, but also the economic, ethical, and other social implications of the diffusion and use of a specific procedure or technique on medical practice". So considering the policy-oriented nature of HTA that calls for a close integration into the functioning and governance of health systems the present study focuses on executive processes and function of the HTA office of Iran.Materials and methods: Data of this review study were collected through documented sources and observations from 2007 to 2010.Results: Health Technology Assessment began its activities as a secretariat in the Deputy of Health in 2007 and it continues as a Health Technology Assessment Office at the Management of Health Technology Assessment, Standardization, and Tariff at the Deputy of curative affairs of MOHME in the beginning of 2010.14 Technology of modern medical equipment and 8 pharmaceutical medicine are assessed, Now many of measures for HTA establishment  such as cooperation National Institute of Health Research (NIHR, Holding scientific committee meetings, Establishing  the  Master's degree of  health technology assessment ,Building capacities for health technology assessment through education in major universities of the country.Conclusion: pay attention to health technology assessment, selection and application of proper technologies in the frameworks of policy-making and managerial strategies and make efforts to develop it with the support of the governmental in Iran is necessary.

  18. Development of materials database system for cae system of heat treatment based on data mining technology

    Institute of Scientific and Technical Information of China (English)

    GU Qiang; ZHONG Rui; JU Dong-ying

    2006-01-01

    Computer simulation for materials processing needs a huge database containing a great deal of various physical properties of materials. In order to employ the accumulated large data on materials heat treatment in the past years,it is significant to develop an intelligent database system. Based on the data mining technology for data analysis,an intelligent database web tool system of computer simulation for heat treatment process named as IndBASEweb-HT was built up. The architecture and the arithmetic of this system as well as its application were introduced.

  19. ASSESSMENT OF GALLIUM OXIDE TECHNOLOGY

    Science.gov (United States)

    2017-08-01

    Universe" ...................................... 5 Figure 4: MEA Architecture [60...weight. Figure 4: MEA Architecture [60] 2.2 How Does Ga2O3 Compare to Other Semiconductors? We are paying attention to β-Ga2O3 because of its...growth is possible. • Limited crystal orientation have been demonstrated. • Technology base is narrowly located in Japan . Mainstream technology

  20. Utility of databases and information technology in pediatric neurology.

    Directory of Open Access Journals (Sweden)

    Panigrahi I

    2002-04-01

    Full Text Available Significant number of neurological patients in the pediatric age group have genetic and/or metabolic basis. It is difficult to remember details of each of them as their number is very large and the disorders are encountered infrequently. This impracticality necessitates the use of various websites and data base search. The internet has become a tool by which one can obtain and disseminate information. It has enhanced the medical person′s ability to know at the earliest the developments in different medical specialities. Furthermore, these rare disorders are being recognized on the basis of specialized tests available only at selected centres which deal with few of these disorders. Our objective is to provide pediatric neurologists easy access to the expanding body of medical information and also to make them aware of the advancements in information technology, which is likely to facilitate telemedicine as a future consultancy service. Information about these diseases can also be facilitated by e-consultations.

  1. Technology for Online Portfolio Assessment Programs

    Science.gov (United States)

    Ferrara, Victoria M.

    2010-01-01

    Portfolio assessment is a valid and reliable method to assess experiential learning. Developing a fully online portfolio assessment program is neither easy nor inexpensive. The institution seeking to take its portfolio assessment program online must make a commitment to its students by offering the technologies most suited to meet students' needs.…

  2. Review of early assessment models of innovative medical technologies

    DEFF Research Database (Denmark)

    Fasterholdt, Iben; Krahn, Murray D; Kidholm, Kristian

    2017-01-01

    INTRODUCTION: Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models...... for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. METHODS: A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision...... problem, and a description of the early assessment model. RESULTS: 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants...

  3. A study on retrieval of article and making database in radio technology with personal computer

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Hwan [College of Medicine, Hallym Univ., Anyang (Korea, Republic of)

    1997-02-01

    Although many useful articles appear in journals published in Korea, they are not always cited by researchers mainly due to absence of efficient searching system. The author made a program with 4 predefined filtering forms to detect published articles rapidly and accurately. The program was coded using database management system CA-Clipper VER 5.2. I used 486DX-II(8 Mbyte Ram, VGA, 560 Mbyte Hard Disk), desk-jet printer(HP-560k), and MS-DOS VER 5.0. I inputed twenty articles in the journal of Korean Society Radio technological Technology, And this program test for retrieve article and made database.

  4. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    OpenAIRE

    Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

    2016-01-01

    We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

  5. Health technology assessment in Iran: challenges and views.

    Science.gov (United States)

    Olyaeemanesh, Alireza; Doaee, Shila; Mobinizadeh, Mohammadreza; Nedjati, Mina; Aboee, Parisa; Emami-Razavi, Seyed Hassan

    2014-01-01

    Various decisions have been made on technology application at all levels of the health system in different countries around the world. Health technology assessment is considered as one of the best scientific tools at the service of policy- makers. This study attempts to investigate the current challenges of Iran's health technology assessment and provide appropriate strategies to establish and institutionalize this program. This study was carried out in two independent phases. In the first, electronic databases such as Medline (via Pub Med) and Scientific Information Database (SID) were searched to provide a list of challenges of Iran's health technology assessment. The views and opinions of the experts and practitioners on HTA challenges were studied through a questionnaire in the second phase which was then analyzed by SPSS Software version 16. This has been an observational and analytical study with a thematic analysis. In the first phase, seven papers were retrieved; from which, twenty- two HTA challenges in Iran were extracted by the researchers; and they were used as the base for designing a structured questionnaire of the second phase. The views of the experts on the challenges of health technology assessment were categorized as follows: organizational culture, stewardship, stakeholders, health system management, infrastructures and external pressures which were mentioned in more than 60% of the cases and were also common in the views. The identification and prioritization of HTA challenges which were approved by those experts involved in the strategic planning of the Department of Health Technology Assessment will be a step forward in the promotion of an evidence- based policy- making and in the production of comprehensive scientific evidence.

  6. Life Cycle Assessment of Slurry Management Technologies

    DEFF Research Database (Denmark)

    Wesnæs, Marianne; Wenzel, Henrik; Petersen, Bjørn Molt

    This report contains the results of Life Cycle Assessments of two slurry management technologies - acidification and decentred incineration. The LCA foundation can be used by the contributing companies for evaluating the environmental sustainability of a specific technology from a holistic Life...... Cycle perspective. Through this the companies can evaluate the environmental benefits and disadvantages of introducing a specific technology for slurry management. From a societal perspective the results can contribute to a clarification of which slurry management technologies (or combination...

  7. Designing and Realization of Database Platform of County Agricultural Production Technology in Yunnan Province

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    According to the objective reality in Yunnan Province,such as great difference of weather,a great proportion of minorities,technological backwardness of agricultural production,low conversion rate of research accomplishments,and a limited number of agricultural technical personnel,ASP.NET technique and SQL Server 2005 database technique are adopted.Database platform of county agricultural production technology in Yunnan Province is established by using B/S structure.This platform includes presentation layer,application layer,and data layer,involving regional information,technology column information,technology classification information,technology content and other databases.It has six functional modules,namely information browse,system management,regional maintenance,technical section maintenance,category maintenance and technical information release,integrating crop cultivation,livestock breeding,economic forest management,plant protection,agricultural products processing,agricultural machinery use and other agricultural technical information.This platform can exchange information dynamically with the client,perform the query request from users,and send the result to users.This database platform has friendly interface,profuse information,high pertinency and so on,which offers rich and reliable information resources to farmers,agricultural technical personnel,and government.At present,this platform has been popularized in some areas of Yunnan Province and has obtained good results.

  8. The Effect of Relational Database Technology on Administrative Computing at Carnegie Mellon University.

    Science.gov (United States)

    Golden, Cynthia; Eisenberger, Dorit

    1990-01-01

    Carnegie Mellon University's decision to standardize its administrative system development efforts on relational database technology and structured query language is discussed and its impact is examined in one of its larger, more widely used applications, the university information system. Advantages, new responsibilities, and challenges of the…

  9. Civil Engineering Technology Needs Assessment.

    Science.gov (United States)

    Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

    In 1991, a study was conducted by Oakland Community College (OCC) to evaluate the need for a proposed Civil Engineering Technology program. An initial examination of the literature focused on industry needs and the job market for civil engineering technicians. In order to gather information on local area employers' hiring practices and needs, a…

  10. Knowledge in health technology assessment

    DEFF Research Database (Denmark)

    Tjørnhøj-Thomsen, Tine; Hansen, Helle Ploug

    2011-01-01

    to generate knowledge and evidence about the patient aspects of a given technology. This raises questions about how knowledge is produced in HTA reports and what kind of knowledge is considered relevant. This article uses a Danish HTA on patient education from 2009 as empirical material for a critical...... examination and discussion of knowledge and knowledge production about the patient aspects of HTA....

  11. Wireless technology for ABC Assessment

    DEFF Research Database (Denmark)

    Kristensen, Margit; Kyng, Morten; Christensen, Erika Frischknecht;

      In medical emergency service (EMS) the ABC status (Airway-Breathing-Circulation) of victims is essential in the decision making process regarding prioritizing and treatment. Today's use of information technology does, however, not inform directly about "A" and "B". The parameters are evaluated ...

  12. A Database for Reviewing and Selecting Radioactive Waste Treatment Technologies and Vendors

    Energy Technology Data Exchange (ETDEWEB)

    P. C. Marushia; W. E. Schwinkendorf

    1999-07-01

    Several attempts have been made in past years to collate and present waste management technologies and solutions to waste generators. These efforts have been manifested as reports, buyers' guides, and databases. While this information is helpful at the time it is assembled, the principal weakness is maintaining the timeliness and accuracy of the information over time. In many cases, updates have to be published or developed as soon as the product is disseminated. The recently developed National Low-Level Waste Management Program's Technologies Database is a vendor-updated Internet based database designed to overcome this problem. The National Low-Level Waste Management Program's Technologies Database contains information about waste types, treatment technologies, and vendor information. Information is presented about waste types, typical treatments, and the vendors who provide those treatment methods. The vendors who provide services update their own contact information, their treatment processes, and the types of wastes for which their treatment process is applicable. This information is queriable by a generator of low-level or mixed low-level radioactive waste who is seeking information on waste treatment methods and the vendors who provide them. Timeliness of the information in the database is assured using time clocks and automated messaging to remind featured vendors to keep their information current. Failure to keep the entries current results in a vendor being warned and then ultimately dropped from the database. This assures that the user is dealing with the most current information available and the vendors who are active in reaching and serving their market.

  13. A Database for Reviewing and Selecting Radioactive Waste Treatment Technologies and Vendors

    Energy Technology Data Exchange (ETDEWEB)

    Schwinkendorf, William Erich; Marushia, Patrick Charles

    1999-07-01

    Several attempts have been made in past years to collate and present waste management technologies and solutions to waste generators. These efforts have been manifested as reports, buyers’ guides, and databases. While this information is helpful at the time it is assembled, their principal weakness is maintaining the timeliness and accuracy of the information over time. In many cases, updates have to be published or developed as soon as the product is disseminated. The recently developed National Low-Level Waste Management Program’s Technologies Database is a vendor-updated Internet based database designed to overcome this problem. The National Low-Level Waste Management Program’s Technologies Database contains information about waste types, treatment technologies, and vendor information. Information is presented about waste types, typical treatments, and the vendors who provide those treatment methods. The vendors who provide services update their own contact information, their treatment processes, and the types of wastes for which their treatment process is applicable. This information is queriable by a generator of low-level or mixed low-level radioactive waste who is seeking information on waste treatment methods and the vendors who provide them. Timeliness of the information in the database is assured using time clocks and automated messaging to remind featured vendors to keep their information current. Failure to keep the entries current results in a vendor being warned and then ultimately dropped from the database. This assures that the user is dealing with the most current information available and the vendors who are active in reaching and serving their market.

  14. Technological and life cycle assessment of organics processing odour control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  15. Assessment of the SFC database for analysis and modeling

    Science.gov (United States)

    Centeno, Martha A.

    1994-01-01

    SFC is one of the four clusters that make up the Integrated Work Control System (IWCS), which will integrate the shuttle processing databases at Kennedy Space Center (KSC). The IWCS framework will enable communication among the four clusters and add new data collection protocols. The Shop Floor Control (SFC) module has been operational for two and a half years; however, at this stage, automatic links to the other 3 modules have not been implemented yet, except for a partial link to IOS (CASPR). SFC revolves around a DB/2 database with PFORMS acting as the database management system (DBMS). PFORMS is an off-the-shelf DB/2 application that provides a set of data entry screens and query forms. The main dynamic entity in the SFC and IOS database is a task; thus, the physical storage location and update privileges are driven by the status of the WAD. As we explored the SFC values, we realized that there was much to do before actually engaging in continuous analysis of the SFC data. Half way into this effort, it was realized that full scale analysis would have to be a future third phase of this effort. So, we concentrated on getting to know the contents of the database, and in establishing an initial set of tools to start the continuous analysis process. Specifically, we set out to: (1) provide specific procedures for statistical models, so as to enhance the TP-OAO office analysis and modeling capabilities; (2) design a data exchange interface; (3) prototype the interface to provide inputs to SCRAM; and (4) design a modeling database. These objectives were set with the expectation that, if met, they would provide former TP-OAO engineers with tools that would help them demonstrate the importance of process-based analyses. The latter, in return, will help them obtain the cooperation of various organizations in charting out their individual processes.

  16. Carbon Capture: A Technology Assessment

    Science.gov (United States)

    2013-10-21

    time. The absence of a significant market for the novel technologies put them at a further disadvantage . This is similar to the situation for CO2...the overall CCS process applied to a power plant or other industrial process. The CO2 produced from carbon in the fossil fuels or biomass feedstock...Air or Oxygen Fossil Fuels; Biomass USEFUL PRODUCTS (e.g., electricity, fuels, chemicals, hydrogen) CO2 CO2 Capture & Compress CO2 Transport CO2

  17. Managing Database Services: An Approach Based in Information Technology Services Availabilty and Continuity Management

    Directory of Open Access Journals (Sweden)

    Leonardo Bastos Pontes

    2017-01-01

    Full Text Available This paper is held in the information technology services management environment, with a few ideas of information technology governance, and purposes to implement a hybrid model to manage the services of a database, based on the principles of information technology services management in a supplementary health operator. This approach utilizes fundamental nuances of services management guides, such as CMMI for Services, COBIT, ISO 20000, ITIL and MPS.BR for Services; it studies harmonically Availability and Continuity Management, as most part of the guides also do. This work has its importance because it keeps a good flow in the database and improves the agility of the systems in the accredited clinics in the health plan.

  18. Assessing medical technologies in development; a new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, Gerhard

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. - Method: We introduce a method, based on

  19. Assessing medical technologies in development - A new paradigm of medical technology assessment

    NARCIS (Netherlands)

    Hummel, MJM; van Rossum, W; Verkerke, GJ; Rakhorst, G

    2000-01-01

    Objective: Our study aims to provide a practical contribution to the field of medical technology assessment within a new paradigm. This paradigm indicates the need for more comprehensive technology assessments in the development stage of a new technology. Method: We introduce a method, based on Saat

  20. Automatization of Student Assessment Using Multimedia Technology.

    Science.gov (United States)

    Taniar, David; Rahayu, Wenny

    Most use of multimedia technology in teaching and learning to date has emphasized the teaching aspect only. An application of multimedia in examinations has been neglected. This paper addresses how multimedia technology can be applied to the automatization of assessment, by proposing a prototype of a multimedia question bank, which is able to…

  1. On Quality Assessment of Learning Technology Specifications

    NARCIS (Netherlands)

    Janssen, José; Berlanga, Adriana; Koper, Rob

    2012-01-01

    Janssen, J., Berlanga, A. J., & Koper, R. (2012). On Quality Assessment of Learning Technology Specifications. In J. C. Ramalho, A. Simões, & R. Queirós (Eds.). Innovations in XML Applications and Metadata Management: Advancing Technologies (pp. 78-95). Hershey, PA, USA: IGI Global. Below file

  2. A Suite of Tools for Technology Assessment

    Science.gov (United States)

    2007-09-01

    Saden, Povinelli & Rosen, 1989). • This was a significant change in emphasis on the part of NASA, where technology had previously viewed as merely...Cost Analysis Symposium, April 13, 2005. A Suite of Tools for Technology Assessment 24 Bibliography - continued: • Sadin, Stanley T.; Povinelli

  3. The internationalization of health technology assessment.

    Science.gov (United States)

    Menon, D; Marshall, D

    1996-01-01

    Health technology assessment as a formalized set of activities has a relatively short history. At its current stage of development, it is clear that it has global dimensions and impact. In this paper we review the history of health technology assessment, its development as a form of health services research, and its "institutionalization." We then identify the reasons for its internationalization, review current international initiatives, and propose actions to be taken to improve cooperation among countries.

  4. QUALITY ASSESSMENT OF ETHICS ANALYSES FOR HEALTH TECHNOLOGY ASSSESSMENT.

    Science.gov (United States)

    Scott, Anna Mae; Bond, Kenneth; Gutiérrez-Ibarluzea, Iñaki; Hofmann, Björn; Sandman, Lars

    2016-01-01

    Although consideration of ethical issues is recognized as a crucial part of health technology assessment, ethics analysis for HTA is generally perceived as methodologically underdeveloped in comparison to other HTA domains. The aim of our study is (i) to verify existing tools for quality assessment of ethics analyses for HTA, (ii) to consider some arguments for and against the need for quality assessment tools for ethics analyses for HTA, and (iii) to propose a preliminary set of criteria that could be used for assessing the quality of ethics analyses for HTA. We systematically reviewed the literature, reviewed HTA organizations' Web sites, and solicited views from thirty-two experts in the field of ethics for HTA. The database and HTA agency Web site searches yielded 420 references (413 from databases, seven from HTA Web sites). No formal instruments for assessing the quality of ethics analyses for HTA purposes were identified. Thirty-two experts in the field of ethics for HTA from ten countries, who were brought together at two workshops held in Edmonton (Canada) and Cologne (Germany) confirmed the findings from the literature. Generating a quality assessment tool for ethics analyses in HTA would confer considerable benefits, including methodological alignment with other areas of HTA, increase in transparency and transferability of ethics analyses, and provision of common language between the various participants in the HTA process. We propose key characteristics of quality assessment tools for this purpose, which can be applied to ethics analyses for HTA purposes.

  5. Airport databases for 3D synthetic-vision flight-guidance displays: database design, quality assessment, and data generation

    Science.gov (United States)

    Friedrich, Axel; Raabe, Helmut; Schiefele, Jens; Doerr, Kai Uwe

    1999-07-01

    In future aircraft cockpit designs SVS (Synthetic Vision System) databases will be used to display 3D physical and virtual information to pilots. In contrast to pure warning systems (TAWS, MSAW, EGPWS) SVS serve to enhance pilot spatial awareness by 3-dimensional perspective views of the objects in the environment. Therefore all kind of aeronautical relevant data has to be integrated into the SVS-database: Navigation- data, terrain-data, obstacles and airport-Data. For the integration of all these data the concept of a GIS (Geographical Information System) based HQDB (High-Quality- Database) has been created at the TUD (Technical University Darmstadt). To enable database certification, quality- assessment procedures according to ICAO Annex 4, 11, 14 and 15 and RTCA DO-200A/EUROCAE ED76 were established in the concept. They can be differentiated in object-related quality- assessment-methods following the keywords accuracy, resolution, timeliness, traceability, assurance-level, completeness, format and GIS-related quality assessment methods with the keywords system-tolerances, logical consistence and visual quality assessment. An airport database is integrated in the concept as part of the High-Quality- Database. The contents of the HQDB are chosen so that they support both Flight-Guidance-SVS and other aeronautical applications like SMGCS (Surface Movement and Guidance Systems) and flight simulation as well. Most airport data are not available. Even though data for runways, threshold, taxilines and parking positions were to be generated by the end of 1997 (ICAO Annex 11 and 15) only a few countries fulfilled these requirements. For that reason methods of creating and certifying airport data have to be found. Remote sensing and digital photogrammetry serve as means to acquire large amounts of airport objects with high spatial resolution and accuracy in much shorter time than with classical surveying methods. Remotely sensed images can be acquired from satellite

  6. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  7. The social function of technology assessment

    Science.gov (United States)

    Huddle, F. P.

    1972-01-01

    The problem of preserving the uneasy balance between a dynamic society and the equilibrium of man-environment society is discussed. Four sets of activities involved in technology assessment are considered: (1) Technology forecasting is necessary to warn of future dangers and opportunities, for effective timing, and to identify tradeoffs and alternatives. But forecasting is also chancy at best. (2) Social indicators need to be developed for the characterization of social status and measurement of social progress, as well as a better understanding of social needs. (3) With respect to technology assessment, the conflict between profitable directions of innovations and socially desirable directions is described, and a systematic way is needed to determine in advance what is technologically feasible to meet social needs. (4) National goals with respect to scientific and technological developments are also required.

  8. Seismic hazard assessment for Myanmar: Earthquake model database, ground-motion scenarios, and probabilistic assessments

    Science.gov (United States)

    Chan, C. H.; Wang, Y.; Thant, M.; Maung Maung, P.; Sieh, K.

    2015-12-01

    We have constructed an earthquake and fault database, conducted a series of ground-shaking scenarios, and proposed seismic hazard maps for all of Myanmar and hazard curves for selected cities. Our earthquake database integrates the ISC, ISC-GEM and global ANSS Comprehensive Catalogues, and includes harmonized magnitude scales without duplicate events. Our active fault database includes active fault data from previous studies. Using the parameters from these updated databases (i.e., the Gutenberg-Richter relationship, slip rate, maximum magnitude and the elapse time of last events), we have determined the earthquake recurrence models of seismogenic sources. To evaluate the ground shaking behaviours in different tectonic regimes, we conducted a series of tests by matching the modelled ground motions to the felt intensities of earthquakes. Through the case of the 1975 Bagan earthquake, we determined that Atkinson and Moore's (2003) scenario using the ground motion prediction equations (GMPEs) fits the behaviours of the subduction events best. Also, the 2011 Tarlay and 2012 Thabeikkyin events suggested the GMPEs of Akkar and Cagnan (2010) fit crustal earthquakes best. We thus incorporated the best-fitting GMPEs and site conditions based on Vs30 (the average shear-velocity down to 30 m depth) from analysis of topographic slope and microtremor array measurements to assess seismic hazard. The hazard is highest in regions close to the Sagaing Fault and along the Western Coast of Myanmar as seismic sources there have earthquakes occur at short intervals and/or last events occurred a long time ago. The hazard curves for the cities of Bago, Mandalay, Sagaing, Taungoo and Yangon show higher hazards for sites close to an active fault or with a low Vs30, e.g., the downtown of Sagaing and Shwemawdaw Pagoda in Bago.

  9. Too many cooks batter technology assessment.

    Science.gov (United States)

    Wagner, M

    1991-12-02

    The bustling activity and interest in technology assessment obscures two growing problems. More than 70 groups, sporting a variety of agendas, are involved in assessing new devices, drugs and procedures; variations in the information they seek or the methods they use sometimes produce findings that conflict or can't be compared.

  10. An environmental assessment system for environmental technologies

    DEFF Research Database (Denmark)

    Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund

    2014-01-01

    A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

  11. An environmental assessment system for environmental technologies

    DEFF Research Database (Denmark)

    Clavreul, Julie; Baumeister, Hubert; Christensen, Thomas Højlund;

    2014-01-01

    A new model for the environmental assessment of environmental technologies, EASETECH, has been developed. The primary aim of EASETECH is to perform life-cycle assessment (LCA) of complex systems handling heterogeneous material flows. The objectives of this paper are to describe the EASETECH...

  12. Assessment and Learning Technologies: An Overview

    Science.gov (United States)

    Farrell, Treasa; Rushby, Nick

    2016-01-01

    Assessment pervades the learning process. This paper provides an overview of the application of technology to support and enhance diagnostic, formative and summative assessment. The focus is on examining how it can replace what already exists, improve the functionality, catalyse a redesign of the process and in some circumstances, make possible…

  13. Spent Nuclear Fuel Alternative Technology Risk Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Perella, V.F.

    1999-11-29

    A Research Reactor Spent Nuclear Fuel Task Team (RRTT) was chartered by the Department of Energy (DOE) Office of Spent Fuel Management with the responsibility to recommend a course of action leading to a final technology selection for the interim management and ultimate disposition of the foreign and domestic aluminum-based research reactor spent nuclear fuel (SNF) under DOE''s jurisdiction. The RRTT evaluated eleven potential SNF management technologies and recommended that two technologies, direct co-disposal and an isotopic dilution alternative, either press and dilute or melt and dilute, be developed in parallel. Based upon that recommendation, the Westinghouse Savannah River Company (WSRC) organized the SNF Alternative Technology Program to further develop the direct co-disposal and melt and dilute technologies and provide a WSRC recommendation to DOE for a preferred SNF alternative management technology. A technology risk assessment was conducted as a first step in this recommendation process to determine if either, or both, of the technologies posed significant risks that would make them unsuitable for further development. This report provides the results of that technology risk assessment.

  14. Studying on the Fuzzy-QFD System Based on Database Class Encapsulation Technology

    Institute of Scientific and Technical Information of China (English)

    FANG Xifeng; ZHANG Shengwen; LU Yuping; WU Hongtao

    2006-01-01

    Complicated product QFD system design information including design and manufacturing, operation and maintenance as well as relative supply information, all are tightly related to the product life cycle cooperative design and the process of establishing the QFD system. In the early stage of product design, we can only get the fuzzy and unreliable information. With design going, the fuzzy and unreliable information become less and less. The defect of the traditional QFD is not deal with the fuzzy contents very well. Adopt database class encapsulation and fuzzy inference technology, and then discuss the realization of QFD system based on VFP database. The structure of the fuzzy QFD system based on database class's encapsulation is built and the work flow of fuzzy algorithm based on VFP software is presented. In the analysis of fuzzy QFD process, fuzzy inference is adopted. A developed prototype system and an example have verified some presented techniques and the research results are the basis of the future development.

  15. Preferance of computer technology for analytical support of large database of medical information systems

    Directory of Open Access Journals (Sweden)

    Biryukov А.P.

    2013-12-01

    Full Text Available Aim: to study the use of intelligent technologies for analytical support of large databases of medical information systems. Material and methods. We used the techniques of object-oriented software design and database design. Results. Based on expert review of models and algorithms for analysis of clinical and epidemiological data and principles of knowledge representation in large-scale health information systems, data mining schema were implemented in the software package of the register of Research Center n.a. A. I. Burnazyan of Russia. Identified areas for effective implementation of abstract data model of EAV and procedures Data Maning for the design of database of biomedical registers. Conclusions. Using intelligent software platform that supports different sets of APIs and object models for different operations in different software environments, allows you to build and maintain an information system through the procedures of data biomedical processing.

  16. Life cycle assessment of products and technologies. LCA Symposium

    Energy Technology Data Exchange (ETDEWEB)

    Koukkari, H.; Nors, M. (eds.)

    2009-12-15

    VTT Technical Research Centre of Finland organised a Symposium 'Life Cycle Assessment of Products and Technologies' on the 6th of October, 2009. The Symposium gave a good overview of methods, tools and applications of Life Cycle Assessment developed and utilised in several technology fields of VTT. The 12 Symposium papers deal with recent LCA studies on products and technologies. The scope ranges from beverage cups to urban planning, from inventory databases to rating systems. Topical issues relating to climate change concern biorefineries and the overall impacts of the utilisation of biomass. The calculation of carbon footprints is also introduced through paper products and magazines. One example of LCA tools developed at VTT addresses cement manufacturing. VTT's transport emission database, LIPASTO, was introduced in detail. The use of LCA methods and life cycle thinking is described in various contexts: product development in relation to precision instruments; selection of materials and work processes in relation to sediment remediation project; and procedures of sustainability rating through VTT's office building Digitalo. The Climate Bonus project presented a demonstrated ICT support that informs about the greenhouse gas emissions and carbon footprints of households. (orig.)

  17. Health technology assessment and thyroid surgery.

    Science.gov (United States)

    Lucchini, R; Sanguinetti, A; Monacelli, M; Triola, R; Avenia, S; Conti, C; Santoprete, S; Avenia, N

    2013-01-01

    The growth of technological innovation, the request for assistance, the rising patient's expectations and the interest of the industry have led to a rise in the cost of health care systems. In this context the role of the National Health System is not to delay the development or adoption of new technologies, but rather to drive the development selecting priorities and promoting its use. Health Technology Assessment (HTA) is a multidisciplinary and multidimensional approach for analyzing the medical-clinical, social, organizational, economic, ethical and legal implications of a technology (devices, drugs, procedures) through the assessment of multiple parameters such as effectiveness, safety, costs of the social and organizational impact. A health technology assessment is a comprehensive, systematic evaluation of the prerequisites for estimating the consequences of using health technology. Main characteristic of HTA is that the problem is tackled using an approach focused on four main elements: - technology; - patient; - organization; - economy. The authors have applied the HTA method for the analysis of the ultrasonic focus dissector on thyroid surgery. They compared the cost of the surgical procedure using the ultrasonic dissector and without it in a case study of 440 patients who underwent thyroidectomy.

  18. Health Technology Assessment and patient safety

    Directory of Open Access Journals (Sweden)

    Andrew Mulcahy

    2005-12-01

    Full Text Available

    Health Technology Assessment (HTA is a process used to evaluate the clinical effectiveness and costeffectiveness of health technologies by a systematic review of clinical, economic, and utilization research.

    Despite widespread investment in patient safety technologies in the U.K., U.S., and elsewhere, little HTA has been done to establish the clinical or cost-effectiveness of these technologies. The HTA and patient safety literature suggests there are four categories of patient safety HTA, including HTA for existing safety technologies, underutilized safety technologies, emerging safety technologies, as well as safety aspects of technologies with a non-safety primary purpose.

    Recent HTA and other research, including a 2002 evidencebased evaluation of patient safety technologies from the U.S. Agency for Health Research and Quality, provide an important foundation for a more comprehensive approach to patient safety HTA. However, HTA programs must address prioritization, methodology, and dissemination challenges introduced by patient safety technologies before significant progress can Te made.

  19. Information Technologies in Public Health Management: A Database on Biocides to Improve Quality of Life

    Directory of Open Access Journals (Sweden)

    A Grigoriu

    2012-05-01

    Full Text Available Background: Biocides for prolonging the shelf life of a large variety of materials have been extensively used over the last decades. It has estimated that the worldwide biocide consumption to be about 12.4 billion dollars in 2011, and is expected to increase in 2012. As biocides are substances we get in contact with in our everyday lives, access to this type of information is of paramount importance in order to ensure an appropriate living environment. Consequently, a database where information may be quickly processed, sorted, and easily accessed, according to different search criteria, is the most desirable solution. The main aim of this work was to design and implement a relational database with complete information about biocides used in public health management to improve the quality of life.Methods: Design and implementation of a relational database for biocides, by using the software "phpMyAdmin".Results: A database, which allows for an efficient collection, storage, and management of information including chemical properties and applications of a large quantity of biocides, as well as its adequate dissemination into the public health environment.Conclusion: The information contained in the database herein presented promotes an adequate use of biocides, by means of information technologies, which in consequence may help achieve important improvement in our quality of life.

  20. Database use and technology in Japan: JTEC panel report. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Wiederhold, G.; Beech, D.; Bourne, C.; Farmer, N.; Jajodia, Sushil; Kahaner, D.; Minoura, Toshi; Smith, D.; Smith, J.M.

    1992-04-01

    This report presents the findings of a group of database experts, sponsored by the Japanese Technology Evaluation Center (JTEC), based on an intensive study trip to Japan during March 1991. Academic, industrial, and governmental sites were visited. The primary findings are that Japan is supporting its academic research establishment poorly, that industry is making progress in key areas, and that both academic and industrial researchers are well aware of current domestic and foreign technology. Information sharing between industry and academia is effectively supported by governmental sponsorship of joint planning and review activities, and enhances technology transfer. In two key areas, multimedia and object-oriented databases, the authors can expect to see future export of Japanese database products, typically integrated into larger systems. Support for academic research is relatively modest. Nevertheless, the senior faculty are well-known and respected, and communicate frequently and in depth with each other, with government agencies, and with industry. In 1988 there were a total of 1,717 Ph.D.`s in engineering and 881 in science. It appears that only about 30 of these were academic Ph.D.`s in the basic computer sciences.

  1. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  2. Status and assessment of photovoltaic technologies

    Science.gov (United States)

    Kazmerski, L. L.

    The history and status of the current photovoltaic technologies are reviewed and evaluated. The problems and strengths of single-crystal, polycrystalline, and amorphous technologies are discussed, compared, and assessed. Single-junction and multiple-junction or tandem cell configurations are evaluated for performance, processing, and engineering criteria. Some emphasis is placed on the emerging thin film options for low cost terrestrial applications. The basic photovoltaic system building block, the solar cell, is discussed along with important module developments and problems. Future technology and research directions are provided for materials, cells, and modules.

  3. Status and assessment of photovoltaic technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kazmerski, L.L. (Solar Energy Research Inst., Golden, CO (USA))

    1989-01-01

    The history and status of the current photovoltaic technologies are reviewed and evaluated. The problems and strengths of single-crystal, polycrystalline, and amorphous technologies are discussed, compared and assessed. Single-junction and multiple-junction or tandem cell configurations are evaluated for performance, processing, and engineering criteria. Some emphasis is placed on the emerging thin film options for low cost terrestrial applications. Discussions centre around the basic photovoltaic system building block, the solar cell, but important module developments and problems are cited. Future technology and research directions are provided for materials, cells, and modules. (author).

  4. Methods of synthesizing qualitative research studies for health technology assessment.

    Science.gov (United States)

    Ring, Nicola; Jepson, Ruth; Ritchie, Karen

    2011-10-01

    Synthesizing qualitative research is an important means of ensuring the needs, preferences, and experiences of patients are taken into account by service providers and policy makers, but the range of methods available can appear confusing. This study presents the methods for synthesizing qualitative research most used in health research to-date and, specifically those with a potential role in health technology assessment. To identify reviews conducted using the eight main methods for synthesizing qualitative studies, nine electronic databases were searched using key terms including meta-ethnography and synthesis. A summary table groups the identified reviews by their use of the eight methods, highlighting the methods used most generally and specifically in relation to health technology assessment topics. Although there is debate about how best to identify and quality appraise qualitative research for synthesis, 107 reviews were identified using one of the eight main methods. Four methods (meta-ethnography, meta-study, meta-summary, and thematic synthesis) have been most widely used and have a role within health technology assessment. Meta-ethnography is the leading method for synthesizing qualitative health research. Thematic synthesis is also useful for integrating qualitative and quantitative findings. Four other methods (critical interpretive synthesis, grounded theory synthesis, meta-interpretation, and cross-case analysis) have been under-used in health research and their potential in health technology assessments is currently under-developed. Synthesizing individual qualitative studies has becoming increasingly common in recent years. Although this is still an emerging research discipline such an approach is one means of promoting the patient-centeredness of health technology assessments.

  5. Construction of an ortholog database using the semantic web technology for integrative analysis of genomic data.

    Science.gov (United States)

    Chiba, Hirokazu; Nishide, Hiroyo; Uchiyama, Ikuo

    2015-01-01

    Recently, various types of biological data, including genomic sequences, have been rapidly accumulating. To discover biological knowledge from such growing heterogeneous data, a flexible framework for data integration is necessary. Ortholog information is a central resource for interlinking corresponding genes among different organisms, and the Semantic Web provides a key technology for the flexible integration of heterogeneous data. We have constructed an ortholog database using the Semantic Web technology, aiming at the integration of numerous genomic data and various types of biological information. To formalize the structure of the ortholog information in the Semantic Web, we have constructed the Ortholog Ontology (OrthO). While the OrthO is a compact ontology for general use, it is designed to be extended to the description of database-specific concepts. On the basis of OrthO, we described the ortholog information from our Microbial Genome Database for Comparative Analysis (MBGD) in the form of Resource Description Framework (RDF) and made it available through the SPARQL endpoint, which accepts arbitrary queries specified by users. In this framework based on the OrthO, the biological data of different organisms can be integrated using the ortholog information as a hub. Besides, the ortholog information from different data sources can be compared with each other using the OrthO as a shared ontology. Here we show some examples demonstrating that the ortholog information described in RDF can be used to link various biological data such as taxonomy information and Gene Ontology. Thus, the ortholog database using the Semantic Web technology can contribute to biological knowledge discovery through integrative data analysis.

  6. High Energy Nuclear Database: A Testbed for Nuclear Data Information Technology

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D A; Vogt, R; Beck, B; Pruet, J

    2007-04-18

    We describe the development of an on-line high-energy heavy-ion experimental database. When completed, the database will be searchable and cross-indexed with relevant publications, including published detector descriptions. While this effort is relatively new, it will eventually contain all published data from older heavy-ion programs as well as published data from current and future facilities. These data include all measured observables in proton-proton, proton-nucleus and nucleus-nucleus collisions. Once in general use, this database will have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models for a broad range of experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion, target and source development for upcoming facilities such as the International Linear Collider and homeland security. This database is part of a larger proposal that includes the production of periodic data evaluations and topical reviews. These reviews would provide an alternative and impartial mechanism to resolve discrepancies between published data from rival experiments and between theory and experiment. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This project serves as a testbed for the further development of an object-oriented nuclear data format and database system. By using ''off-the-shelf'' software tools and techniques, the system is simple, robust, and extensible. Eventually we envision a ''Grand Unified Nuclear Format'' encapsulating data types used in the ENSDF, ENDF/B, EXFOR, NSR and other formats, including processed data formats.

  7. Evidence review of technology and dietary assessment.

    Science.gov (United States)

    Long, JoAnn D; Littlefield, Laurel A; Estep, Gary; Martin, Hope; Rogers, Toby J; Boswell, Carol; Shriver, Brent J; Roman-Shriver, Carmen R

    2010-12-01

    Diets high in fruit and vegetable consumption are associated with a decrease in chronic diseases. Dietary factors are linked to 4 of the 10 leading noncommunicable causes of death: cardiovascular disease, some cancers, stroke, and type 2 diabetes. Accurately measuring dietary patterns has many challenges. Dietary intake measurement has traditionally relied on self-report instruments such as 24-hour recall, food record, and food frequency questionnaires to record consumption history. These methods have inherent limitations in detecting small but important changes in fruit and vegetable consumption patterns. Promising advances in technology have made more sophisticated techniques for recording dietary intake possible. Computers and Web-based programs, handheld personal digital assistants with cameras and telephone cards, smart phones, cameras, and video recorders options may reduce the burden of recording what has been consumed. Furthermore, technology-based methods of dietary assessment may provide a higher degree of reliability and validity in visually determining fruit and vegetable consumption, and additional study is warranted. The purpose of this article is to present a review of the evidence on the effectiveness of technology-based methods for dietary assessment, which included fruit and vegetable consumption. One hundred and eighty-seven articles published between 1998 and 2008 were initially identified. Fifteen met the study inclusion criteria and were evaluated by an interdisciplinary team using the Stetler Strength of Evidence Scale. Six technology-based methods for dietary assessment were identified. Findings from validity and reliability testing of technology-based methods are encouraging and need replication. Clinically important features offered through technology may reduce reporting burden and offer behavioral feedback to users. Methodologically sound, empirical research into using technology-based application for dietary assessment in a variety of

  8. A Health Technology Assessment: laparoscopy versus colpoceliotomy.

    Science.gov (United States)

    Damonti, A; Ferrario, L; Morelli, P; Mussi, M; Patregnani, C; Garagiola, E; Foglia, E; Pagani, R; Carminati, R; Porazzi, E

    2015-01-01

    The objective of this paper is the comparison between two different technologies used for the removal of a uterine myoma, a frequent benign tumor: the standard technology currently used, laparoscopy, and an innovative one, colpoceliotomy. It was considered relevant to evaluate the real and the potential effects of the two technologies implementation and, in addition, the consequences that the introduction or exclusion of the innovative technology would have for both the National Health System (NHS) and the entire community. The comparison between these two different technologies, the standard and the innovative one, was conducted using a Health Technology Assessment (HTA). In particular, in order to analyse their differences, a multi-dimensional approach was considered: effectiveness, costs and budget impact analysis data were collected, applying different instruments, such as the Activity Based Costing methodology (ABC), the Cost-Effectiveness Analysis (CEA) and the Budget Impact Analysis (BIA). Organisational, equity and social impact were also evaluated. The results showed that the introduction of colpoceliotomy would provide significant economic savings to the Regional and National Health Service; in particular, a saving of € 453.27 for each surgical procedure. The introduction of the innovative technology, colpoceliotomy, could be considered a valuable tool; one offering many advantages related to less invasiveness and a shorter surgical procedure than the standard technology currently used (laparoscopy).

  9. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2007-01-01

    As a consequence of the EU Water Framwork Directive, more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advenced treatment technologies. This paper describes a holistic assessment...... of sustainability, sand filtration is the most advantageous method based on the technical and environmental assessment due to the low energy consumption and high efficiency with regard to the removal of heavy metals....

  10. Assessing Database and Network Threats in Traditional and Cloud Computing

    Directory of Open Access Journals (Sweden)

    Katerina Lourida

    2015-05-01

    Full Text Available Cloud Computing is currently one of the most widely-spoken terms in IT. While it offers a range of technological and financial benefits, its wide acceptance by organizations is not yet wide spread. Security concerns are a main reason for this and this paper studies the data and network threats posed in both traditional and cloud paradigms in an effort to assert in which areas cloud computing addresses security issues and where it does introduce new ones. This evaluation is based on Microsoft’s STRIDE threat model and discusses the stakeholders, the impact and recommendations for tackling each threat.

  11. Indexed University presses: overlap and geographical distribution in five book assessment databases

    Energy Technology Data Exchange (ETDEWEB)

    Mañana-Rodriguez, J.; Gimenez-Toledo, E

    2016-07-01

    Scholarly books have been a periphery among the objects of study of bibliometrics until recent developments provided tools for assessment purposes. Among scholarly book publishers, University Presses (UPs hereinafter), subject to specific ends and constrains in their publishing activity, might also remain on a second-level periphery despite their relevance as scholarly book publishers. In this study the authors analyze the absolute and relative presence, overlap and uniquely-indexed cases of 503 UPs by country, among five assessment-oriented databases containing data on scholarly book publishers: Book Citation Index, Scopus, Scholarly Publishers Indicators (Spain), the lists of publishers from the Norwegian System (CRISTIN) and the lists of publishers from the Finnish System (JUFO). The comparison between commercial databases and public, national databases points towards a differential pattern: prestigious UPs in the English Speaking world represent larger shares and there is a higher overall percentage of UPs in the commercial databases, while the richness and diversity is higher in the case of national databases. Explicit or de facto biases towards production in English by commercial databases, as well as diverse indexation criteria might explain the differences observed. The analysis of the presence of UPs in different numbers of databases by country also provides a general picture of the average degree of diffusion of UPs among information systems. The analysis of ‘endemic’ UPs, those indexed only in one of the five databases points out to strongly different compositions of UPs in commercial and non-commercial databases. A combination of commercial and non commercial databases seems to be the optimal option for assessment purposes while the validity and desirability of the ongoing debate on the role of UPs can be also concluded. (Author)

  12. Calculation of Investments for the Distribution of GPON Technology in the village of Bishtazhin through database

    Directory of Open Access Journals (Sweden)

    MSc. Jusuf Qarkaxhija

    2013-12-01

    Full Text Available According to daily reports, the income from internet services is getting lower each year. Landline phone services are running at a loss,  whereas mobile phone services are getting too mainstream and the only bright spot holding together cable operators (ISP  in positive balance is the income from broadband services (Fast internet, IPTV. Broadband technology is a term that defines multiple methods of information distribution through internet at great speed. Some of the broadband technologies are: optic fiber, coaxial cable, DSL, Wireless, mobile broadband, and satellite connection.  The ultimate goal of any broadband service provider is being able to provide voice, data and the video through a single network, called triple play service. The Internet distribution remains an important issue in Kosovo and particularly in rural zones. Considering the immense development of the technologies and different alternatives that we can face, the goal of this paper is to emphasize the necessity of a forecasting of such investment and to give an experience in this aspect. Because of the fact that in this investment are involved many factors related to population, geographical factors, several technologies and the fact that these factors are in continuously change, the best way is, to store all the data in a database and to use this database for different results. This database helps us to substitute the previous manual calculations with an automatic procedure of calculations. This way of work will improve the work style, having now all the tools to take the right decision about an Internet investment considering all the aspects of this investment.

  13. Broadband Satellite Technologies and Markets Assessed

    Science.gov (United States)

    Wallett, Thomas M.

    1999-01-01

    The current usage of broadband (data rate greater than 64 kilobits per second (kbs)) for multimedia network computer applications is increasing, and the need for network communications technologies and systems to support this use is also growing. Satellite technology will likely be an important part of the National Information Infrastructure (NII) and the Global Information Infrastructure (GII) in the next decade. Several candidate communications technologies that may be used to carry a portion of the increased data traffic have been reviewed, and estimates of the future demand for satellite capacity have been made. A study was conducted by the NASA Lewis Research Center to assess the satellite addressable markets for broadband applications. This study effort included four specific milestones: (1) assess the changing nature of broadband applications and their usage, (2) assess broadband satellite and terrestrial technologies, (3) estimate the size of the global satellite addressable market from 2000 to 2010, and (4) identify how the impact of future technology developments could increase the utility of satellite-based transport to serve this market.

  14. Regionalized life cycle assessment: computational methodology and application to inventory databases.

    Science.gov (United States)

    Mutel, Christopher L; Hellweg, Stefanie

    2009-08-01

    Life cycle assessment (LCA) studies have shown that site-dependent impact assessment for categories like acidification and eutrophication give more accurate and realistic results than site-generic assessments. To date, existing geography-specific, or regionalized, impact assessment factors have not been applied to LCA databases and software tools. We describe a simple, generic methodology to couple existing regionalized characterization factors with large life cycle inventory databases. This approach allows for detailed geographic life cycle impact assessment results. Case-study results for European country-specific electricity mixes are calculated using the Ecoinvent 2.01 database and the EDIP 2003 and Accumulated Exceedance impact assessment methods and CASES project external energy cost characterization factors. In most cases, regionalization shows different total scores, different processes of high importance, and varying geographic distributions of environmental impacts. As the methodology requires no additional input other than the geographic information already in existing LCA databases, it can be used routinely. Better and more consistent geographic information in life cycle inventory databases and impact assessment methods, tailored to the specific spatial range of all environmental effects considered, would be beneficial.

  15. Interactive Technology Assessment in the Real World

    NARCIS (Netherlands)

    Marris, Claire; Joly, Pierre-Benoit; Rip, Arie

    2008-01-01

    Participatory Technology Assessment (pTA) initiatives have usually been analyzed as if they existed in a social and political vacuum. This article analyzes the linkages that occur, in both directions, between the microcosm set up by a pTA exercise and the real world outside. This dual-dynamics persp

  16. Community Needs Assessment Office Administration & Technology (OAT).

    Science.gov (United States)

    Pezzoli, J. A.; Lum, Ku'uipo; Meyer, Diane

    The purpose of this survey was to obtain from employers the requisite skills and potential employment demand for office workers on Maui. Of particular interest was: (1) the assessment of various clerical skills and computer software in its relevance to the Office Administration & Technology (OAT) curriculum at Maui Community College; and (2)…

  17. Teacher Learning of Technology Enhanced Formative Assessment

    Science.gov (United States)

    Feldman, Allan; Capobianco, Brenda M.

    2008-01-01

    This study examined the integration of technology enhanced formative assessment (FA) into teachers' practice. Participants were high school physics teachers interested in improving their use of a classroom response system (CRS) to promote FA. Data were collected using interviews, direct classroom observations, and collaborative discussions. The…

  18. Interactive technology assessment and wide reflective equilibrium.

    NARCIS (Netherlands)

    Reuzel, R.P.B.; Wilt, G.J. van der; Have, H.A.M.J. ten; Vries Robbé, P.F. de

    2001-01-01

    Interactive technology assessment (iTA) provides an answer to the ethical problem of normative bias in evaluation research. This normative bias develops when relevant perspectives on the evaluand (the thing being evaluated) are neglected. In iTA this bias is overcome by incorporating different persp

  19. An assessment of information communication technology content ...

    African Journals Online (AJOL)

    An assessment of information communication technology content, context and process dimensions in public health facilities in Machakos and Nairobi ... to lack of support from hospital top management team (χ 9.44, d.f.=4 and p=0.005).

  20. Technology and the issues facing nursing assessment.

    Science.gov (United States)

    Ansell, Helen; Meyer, Alannah; Thompson, Shona

    This article describes an investigation into the use of technology and the issues nurses face undertaking nursing assessment. It reports qualitative, descriptive research involving interviews with ten ward nurses from three hospitals in New Zealand. Thematic analysis of the data revealed three key issues: the impact of technology, the influence of early warning systems and nurse autonomy. Results show how clinical decision making around nursing assessment is influenced by technology and the Early Warning Score. These clinical decisions may not always be informed by critical thinking in complex healthcare environments. The article concludes that nurse autonomy, while supported and endorsed in theory, is frequently in conflict with hospital risk-management policies and the use of prescriptive algorithms.

  1. Biomass Gasification Technology Assessment: Consolidated Report

    Energy Technology Data Exchange (ETDEWEB)

    Worley, M.; Yale, J.

    2012-11-01

    Harris Group Inc. (HGI) was commissioned by the National Renewable Energy Laboratory to assess gasification and tar reforming technologies. Specifically, the assessments focused on gasification and tar reforming technologies that are capable of producing a syngas suitable for further treatment and conversion to liquid fuels. HGI gathered sufficient information to analyze three gasification and tar reforming systems. This report summarizes the equipment, general arrangement of the equipment, operating characteristics, and operating severity for each technology. The order of magnitude capital cost estimates are supported by a basis-of-estimate write-up, which is also included in this report. The report also includes Microsoft Excel workbook models, which can be used to design and price the systems. The models can be used to analyze various operating capacities and pressures. Each model produces a material balance, equipment list, capital cost estimate, equipment drawings and preliminary general arrangement drawings. Example outputs of each model are included in the Appendices.

  2. Assessment of Sensor Technologies for Advanced Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Korsah, Kofi [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vlim, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Britton, Jr, Charles L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wootan, D. W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Anheier, Jr, N. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Diaz, A. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, E. H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chien, H. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Sheen, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Bakhtiari, Sasan [Argonne National Lab. (ANL), Argonne, IL (United States); Gopalsami, S. [Argonne National Lab. (ANL), Argonne, IL (United States); Heifetz, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Tam, S. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Park, Y. [Argonne National Lab. (ANL), Argonne, IL (United States); Upadhyaya, B. R. [Univ. of Tennessee, Knoxville, TN (United States); Stanford, A. [Univ. of Tennessee, Knoxville, TN (United States)

    2016-10-01

    Sensors and measurement technologies provide information on processes, support operations and provide indications of component health. They are therefore crucial to plant operations and to commercialization of advanced reactors (AdvRx). This report, developed by a three-laboratory team consisting of Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL), provides an assessment of sensor technologies and a determination of measurement needs for AdvRx. It provides the technical basis for identifying and prioritizing research targets within the instrumentation and control (I&C) Technology Area under the Department of Energy’s (DOE’s) Advanced Reactor Technology (ART) program and contributes to the design and implementation of AdvRx concepts.

  3. Constructive Technology Assessment for HIT development

    DEFF Research Database (Denmark)

    Høstgaard, Anna Marie Balling; Bertelsen, Pernille; Petersen, Lone Stub

    2013-01-01

    Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success factor...... in HIT development. A new evaluation methodology, including an analytical framework, has been developed specifically for HIT development: Constructive Technology Assessment (CTA) for HIT. It offers solutions to both the problems associated with summative technology evaluation and a way to involve end......-users. The CTA methodology is based on a Socio-technical understanding of technological development as an open ended, emergent process. The CTA was used during the EHR development process in the Region of North Jutland where it proved successful inproviding learning and feedback between all relevant groups...

  4. Zero-emission vehicle technology assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Woods, T.

    1995-08-01

    This is the final report in the Zero-Emission Vehicle (ZEV) Technology Assessment, performed for NYSERDA by Booz-Allen & Hamilton Inc. Booz-Allen wrote the final report, and performed the following tasks as part of the assessment: assembled a database of key ZEV organizations, their products or services, and plans; described the current state of ZEV technologies; identified barriers to widespread ZEV deployment and projected future ZEV technical capabilities; and estimated the cost of ZEVs from 1998 to 2004. Data for the ZEV Technology Assessment were obtained from several sources, including the following: existing ZEV industry publications and Booz-Allen files; major automotive original equipment manufacturers; independent electric vehicle manufacturers; battery developers and manufacturers; infrastructure and component developers and manufacturers; the U.S. Department of Energy, the California Air Resources Board, and other concerned government agencies; trade associations such as the Electric Power Research Institute and the Electric Transportation Coalition; and public and private consortia. These sources were contacted by phone, mail, or in person. Some site visits of manufacturers also were conducted. Where possible, raw data were analyzed by Booz-Allen staff and/or verified by independent sources. Performance data from standardized test cycles were used as much as possible.

  5. A Formative Assessment Tool for Conceptual Database Design Using UML Class Diagram

    Directory of Open Access Journals (Sweden)

    Josep Soler

    2010-09-01

    Full Text Available Database design is one of the main topics of any introductory database course. Traditionally, for teaching it entity-relationship diagrams (ERD are used. However, in the last years, Unified Modeling Language (UML has emerged as an effective modeling tool for database design. In this paper we present a web-based tool designed to give support to teaching and learning conceptual database design using UML class diagrams. The proposed UML environment is an effective tool for formative assessment since it is capable of correcting automatically UML class diagrams exercises providing immediate feedback to the student. The tool is part of a more general framework, denoted ACME, which provides the main functionalities of an e-learning platform. The tool has been used in a first experimental group of an introductory database course

  6. CRITICAL ASSESSMENT OF AUDITING CONTRIBUTIONS TO EFFECTIVE AND EFFICIENT SECURITY IN DATABASE SYSTEMS

    Directory of Open Access Journals (Sweden)

    Olumuyiwa O. Matthew

    2015-03-01

    Full Text Available Database auditing has become a very crucial aspect of security as organisations increase their adoption of database management systems (DBMS as major asset that keeps, maintain and monitor sensitive information. Database auditing is the group of activities involved in observing a set of stored data in order to be aware of the actions of users. The work presented here outlines the main auditing techniques and methods. Some architectural based auditing systems were also considered to assess the contribution of auditing to database security. Here a framework of several stages to be used in the instigation of auditing is proposed. Some issues relating to handling of audit trails are also discussed in this paper. This paper also itemizes some of the key important impacts of the concept to security and how compliance with government policies and regulations is enforced through auditing. Once the framework is adopted, it will provide support to database auditors and DBAs.

  7. The TESS database. Use in product safety assessment.

    Science.gov (United States)

    Litovitz, T

    1998-01-01

    The Toxic Exposure Surveillance System or TESS is a comprehensive poisoning surveillance database maintained by the American Association of Poison Control Centers. It now includes data on more than 20.3 million human poison exposures reported to US poison centres. TESS data are submitted by 67 of the 75 US poison control centres, covering 87% of the US population. Reports to US poison centres included in TESS originate both from the general public and from health professionals (12.9%) and include both patients managed at home or at the site of the exposure (73.6%) and those managed in hospitals, emergency departments, or other healthcare facilities (22.8%). TESS data are used by the pharmaceutical industry to monitor or defend product safety, by regulatory agencies proposing new regulations or considering new approvals or over-the-counter switches, and by clinical researchers attempting to characterise toxicity profiles or determine treatment protocols. TESS is a key component of an effective post-marketing surveillance programme, allowing early identification of previously unsuspected hazards, and early changes in formulations, labelling, or packaging when needed, thereby minimising injuries, deaths and product liability. Deaths, severe outcomes and comparisons of poisoning outcomes and hospitalisation rates between products or product categories are used to identify safety outliers. TESS data for each case of poisoning include identification of the substances implicated (including brand and formulation where known), patient age, outcome, specific clinical effects, exposure route, reason for the exposure (unintentional, suicidal, therapeutic error, etc.), antidotes used and the level of healthcare intervention utilised. Pharmaceuticals are implicated in 42% of TESS poisoning cases. About 53% of all cases of poisoning occur in children under 6 years of age. Of the more than 2.1 million cases reported to TESS in 1996, 123,095 (5.7%) were therapeutic errors and 32

  8. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2007-01-01

    , which includes technical, economic and environmental aspects. The technical and economic assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, Membrane Bioreactor (MBR), and UV in combination...... and three advanced treatment methods: sand filtration, ozone treatment and MBR. The technical and economic assessment showed that UV solely for disinfection purposes or ozone treatment are the most advantageous advanved treatment methods if the demands are restricted to pathogenic microorganisms. In terms......As a consequence of the EU Water Framwork Directive, more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advenced treatment technologies. This paper describes a holistic assessment...

  9. Sustainability assessment of advanced wastewater treatment technologies.

    Science.gov (United States)

    Høibye, L; Clauson-Kaas, J; Wenzel, H; Larsen, H F; Jacobsen, B N; Dalgaard, O

    2008-01-01

    As a consequence of the EU Water Framework Directive more focus is now on discharges of hazardous substances from wastewater treatment plants and sewers. Thus, many municipalities in Denmark may have to adopt to future advanced treatment technologies. This paper describes a holistic assessment, which includes technical, economical and environmental aspects. The technical and economical assessment is performed on 5 advanced treatment technologies: sand filtration, ozone treatment, UV exclusively for disinfection of pathogenic microorganisms, membrane bioreactor (MBR) and UV in combination with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances and three advanced treatment methods; sand filtration, ozone treatment and MBR. The technical and economic assessment showed that UV solely for disinfection purposes or ozone treatment is the most advantageous advanced treatment methods if the demands are restricted to pathogenic microorganisms. In terms of sustainability, sand filtration is the most advantageous method based on the technical and environmental assessment due to the low energy consumption and high efficiency with regards to removal of heavy metals.

  10. Strategic planning and decision support in small-medium wood enterprises using database technology

    Directory of Open Access Journals (Sweden)

    Zacharoula Andreopoulou

    2012-06-01

    Full Text Available As the enterprise management plays vital role in the overall performance of a company, it is recognized the need for application of quality improvement tools and techniques such as database technology. A DataBase Management System (DBMS is an IT application, which contains information about the company in various levels. Enterprises can use DBMS to plan and standardize their practices and increase overall efficiency in the company. It is an essential management tool for Small and Medium-sized enterprises (SMEs because in such companies the entrepreneur-owner is personally responsible for managing the activities of the company without being an expert. This modern information technology tool is the basis of the application of marketing principles and techniques via electronic media and more specifically the internet. The purpose of this paper is to explore how implementation of modern information technology tools, such as DBMS, simplifies SME management. That DBMS design approach can be a useful tool while designing similar applications in SME in wood sector and also in various issues in primary and secondary production sector.

  11. Geospatial database for regional environmental assessment of central Colorado.

    Science.gov (United States)

    Church, Stanley E.; San Juan, Carma A.; Fey, David L.; Schmidt, Travis S.; Klein, Terry L.; DeWitt, Ed H.; Wanty, Richard B.; Verplanck, Philip L.; Mitchell, Katharine A.; Adams, Monique G.; Choate, LaDonna M.; Todorov, Todor I.; Rockwell, Barnaby W.; McEachron, Luke; Anthony, Michael W.

    2012-01-01

    In conjunction with the future planning needs of the U.S. Department of Agriculture, Forest Service, the U.S. Geological Survey conducted a detailed environmental assessment of the effects of historical mining on Forest Service lands in central Colorado. Stream sediment, macroinvertebrate, and various filtered and unfiltered water quality samples were collected during low-flow over a four-year period from 2004–2007. This report summarizes the sampling strategy, data collection, and analyses performed on these samples. The data are presented in Geographic Information System, Microsoft Excel, and comma-delimited formats. Reports on data interpretation are being prepared separately.

  12. Technology enhanced peer learning and peer assessment

    DEFF Research Database (Denmark)

    Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

    2016-01-01

    This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...... and performing focus group interviews. The application of peer assessment is investigated by analyzing the agreement of peer assessment between students assessing the same assignment. Our analyses confirm previous research on the value of peer learning and peer assessment and we argue that there could also...

  13. Technology enhanced peer learning and peer assessment

    Directory of Open Access Journals (Sweden)

    Christian Bugge Henriksen

    2016-11-01

    Full Text Available This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems and Freshwaters (REEF, the Master thesis preparation seminars for the Master of Public Health (MPH and the MOOC course Global Environmental Management (GEM. The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations and performing focus group interviews. The application of peer assessment is investigated by analyzing the agreement of peer assessment between students assessing the same assignment. Our analyses confirm previous research on the value of peer learning and peer assessment and we argue that there could also be a huge benefit from developing learning design patterns that facilitate informal peer learning and reinforce knowledge sharing practices.

  14. Development and application of basis database for materials life cycle assessment in china

    Science.gov (United States)

    Li, Xiaoqing; Gong, Xianzheng; Liu, Yu

    2017-03-01

    As the data intensive method, high quality environmental burden data is an important premise of carrying out materials life cycle assessment (MLCA), and the reliability of data directly influences the reliability of the assessment results and its application performance. Therefore, building Chinese MLCA database is the basic data needs and technical supports for carrying out and improving LCA practice. Firstly, some new progress on database which related to materials life cycle assessment research and development are introduced. Secondly, according to requirement of ISO 14040 series standards, the database framework and main datasets of the materials life cycle assessment are studied. Thirdly, MLCA data platform based on big data is developed. Finally, the future research works were proposed and discussed.

  15. Update of a thermodynamic database for radionuclides to assist solubility limits calculation for performance assessment

    Energy Technology Data Exchange (ETDEWEB)

    Duro, L.; Grive, M.; Cera, E.; Domenech, C.; Bruno, J. (Enviros Spain S.L., Barcelona (ES))

    2006-12-15

    This report presents and documents the thermodynamic database used in the assessment of the radionuclide solubility limits within the SR-Can Exercise. It is a supporting report to the solubility assessment. Thermodynamic data are reviewed for 20 radioelements from Groups A and B, lanthanides and actinides. The development of this database is partially based on the one prepared by PSI and NAGRA. Several changes, updates and checks for internal consistency and completeness to the reference NAGRA-PSI 01/01 database have been conducted when needed. These modifications are mainly related to the information from the various experimental programmes and scientific literature available until the end of 2003. Some of the discussions also refer to a previous database selection conducted by Enviros Spain on behalf of ANDRA, where the reader can find additional information. When possible, in order to optimize the robustness of the database, the description of the solubility of the different radionuclides calculated by using the reported thermodynamic database is tested in front of experimental data available in the open scientific literature. When necessary, different procedures to estimate gaps in the database have been followed, especially accounting for temperature corrections. All the methodologies followed are discussed in the main text

  16. Bibliographical database of radiation biological dosimetry and risk assessment: Part 1, through June 1988

    Energy Technology Data Exchange (ETDEWEB)

    Straume, T.; Ricker, Y.; Thut, M.

    1988-08-29

    This database was constructed to support research in radiation biological dosimetry and risk assessment. Relevant publications were identified through detailed searches of national and international electronic databases and through our personal knowledge of the subject. Publications were numbered and key worded, and referenced in an electronic data-retrieval system that permits quick access through computerized searches on publication number, authors, key words, title, year, and journal name. Photocopies of all publications contained in the database are maintained in a file that is numerically arranged by citation number. This report of the database is provided as a useful reference and overview. It should be emphasized that the database will grow as new citations are added to it. With that in mind, we arranged this report in order of ascending citation number so that follow-up reports will simply extend this document. The database cite 1212 publications. Publications are from 119 different scientific journals, 27 of these journals are cited at least 5 times. It also contains reference to 42 books and published symposia, and 129 reports. Information relevant to radiation biological dosimetry and risk assessment is widely distributed among the scientific literature, although a few journals clearly dominate. The four journals publishing the largest number of relevant papers are Health Physics, Mutation Research, Radiation Research, and International Journal of Radiation Biology. Publications in Health Physics make up almost 10% of the current database.

  17. Health Technology Assessment: a field still maturing!

    Directory of Open Access Journals (Sweden)

    Renaldo N. Battista

    2005-06-01

    Full Text Available

    With this issue’s focus on Health Technology Assessment (HTA, the Italian Journal of Public Health has tackled an area of growing importance in today’s increasingly complex health care delivery systems.

    As the articles in this issue demonstrate, HTA has grown from a relatively narrow technical focus to a form of policy research underway in dozens of countries. Since its inception just over three decades ago,HTA has evolved through three distinct phases: the machine, the disease and the delivery mode, with the third of these still underway.

    As the focus has shifted from machines to disease conditions to service delivery approaches, HTA has drawn on research and modes of discourse from a growing variety of disciplines. Thus, despite the evolution that continues, HTA remains, at its core, both multidisciplinary and pragmatic, for the strengths of HTA arise from its integration of the efforts of actors in multiple, diverse disciplines with a view to producing knowledge that will assist decision-makers. The machine phase was marked by a focus on the technical performance of health technologies, often embodying innovative approaches to diagnosis or treatment of human illness.

    Given the newness and costliness of many technologies selected for assessment, a significant emphasis was placed on assessing the safety of these devices. Imaging technologies were the subject of assessment in many settings, perhaps in part because devices such as the CT scanner produced remarkable visual results that were heralded as affording breakthroughs in diagnosis and treatment. One need only look through the programs of early HTA conferences to see the emphasis on high cost, infrastructure-intensive health technologies that was the hallmark of the machine period.

  18. Using a Longitudinal Database to Assess the Validity of Preceptors' Ratings of Clerkship Performance

    Science.gov (United States)

    Ferguson, Kristi J.; Kreiter, Clarence D.

    2004-01-01

    Purpose: To examine the validity of using scores from a clinical evaluation form as an assessment of clinical competence. Method: Investigators collected a longitudinal clinical skills assessment database that included scores reflecting performance on standardized patient interactions, case-based learning performance, scores on multiple-choice…

  19. Thematic Accuracy Assessment of the 2011 National Land Cover Database (NLCD)

    Science.gov (United States)

    Accuracy assessment is a standard protocol of National Land Cover Database (NLCD) mapping. Here we report agreement statistics between map and reference labels for NLCD 2011, which includes land cover for ca. 2001, ca. 2006, and ca. 2011. The two main objectives were assessment o...

  20. Technology Audit: Assessment of Innovative Portfolio

    Directory of Open Access Journals (Sweden)

    Kurushina Viktoria

    2016-01-01

    Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

  1. Natural-technological risk assessment and management

    Science.gov (United States)

    Burova, Valentina; Frolova, Nina

    2016-04-01

    EM-DAT statistical data on human impact and economic damages in the 1st semester 2015 are the highest since 2011: 41% of disasters were floods, responsible for 39% of economic damage and 7% of events were earthquakes responsible for 59% of total death toll. This suggests that disaster risk assessment and management still need to be improved and stay the principle issue in national and international related programs. The paper investigates the risk assessment and management practice in the Russian Federation at different levels. The method is proposed to identify the territories characterized by integrated natural-technological hazard. The maps of the Russian Federation zoning according to the integrated natural-technological hazard level are presented, as well as the procedure of updating the integrated hazard level taking into account the activity of separate processes. Special attention is paid to data bases on past natural and technological processes consequences, which are used for verification of current hazard estimation. The examples of natural-technological risk zoning for the country and some regions territory are presented. Different output risk indexes: both social and economic, are estimated taking into account requirements of end-users. In order to increase the safety of population of the Russian Federation the trans-boundaries hazards are also taken into account.

  2. Energy Effectiveness Assessment of Composting Technologies

    OpenAIRE

    Plūme, I.

    2006-01-01

    The incorrect biomass composting improperly results in considerable emission of greenhouse gases, loss of effluent and composting heat into environment. The composting heat and gases utilisation is especially suitable for plant enrichment and heating of greenhouses. The mathematical model is worked out for assessment of energy effectiveness and sustainability of biomass composting process. Coefficient of energy effectiveness for traditional litter manure composting technologies is 0.45 and ca...

  3. A hierarchical spatial framework and database for the national river fish habitat condition assessment

    Science.gov (United States)

    Wang, L.; Infante, D.; Esselman, P.; Cooper, A.; Wu, D.; Taylor, W.; Beard, D.; Whelan, G.; Ostroff, A.

    2011-01-01

    Fisheries management programs, such as the National Fish Habitat Action Plan (NFHAP), urgently need a nationwide spatial framework and database for health assessment and policy development to protect and improve riverine systems. To meet this need, we developed a spatial framework and database using National Hydrography Dataset Plus (I-.100,000-scale); http://www.horizon-systems.com/nhdplus). This framework uses interconfluence river reaches and their local and network catchments as fundamental spatial river units and a series of ecological and political spatial descriptors as hierarchy structures to allow users to extract or analyze information at spatial scales that they define. This database consists of variables describing channel characteristics, network position/connectivity, climate, elevation, gradient, and size. It contains a series of catchment-natural and human-induced factors that are known to influence river characteristics. Our framework and database assembles all river reaches and their descriptors in one place for the first time for the conterminous United States. This framework and database provides users with the capability of adding data, conducting analyses, developing management scenarios and regulation, and tracking management progresses at a variety of spatial scales. This database provides the essential data needs for achieving the objectives of NFHAP and other management programs. The downloadable beta version database is available at http://ec2-184-73-40-15.compute-1.amazonaws.com/nfhap/main/.

  4. Establishment and Assessment of Plasma Disruption and Warning Databases from EAST

    Science.gov (United States)

    Wang, Bo; Robert, Granetz; Xiao, Bingjia; Li, Jiangang; Yang, Fei; Li, Junjun; Chen, Dalong

    2016-12-01

    Disruption database and disruption warning database of the EAST tokamak had been established by a disruption research group. The disruption database, based on Structured Query Language (SQL), comprises 41 disruption parameters, which include current quench characteristics, EFIT equilibrium characteristics, kinetic parameters, halo currents, and vertical motion. Presently most disruption databases are based on plasma experiments of non-superconducting tokamak devices. The purposes of the EAST database are to find disruption characteristics and disruption statistics to the fully superconducting tokamak EAST, to elucidate the physics underlying tokamak disruptions, to explore the influence of disruption on superconducting magnets and to extrapolate toward future burning plasma devices. In order to quantitatively assess the usefulness of various plasma parameters for predicting disruptions, a similar SQL database to Alcator C-Mod for EAST has been created by compiling values for a number of proposed disruption-relevant parameters sampled from all plasma discharges in the 2015 campaign. The detailed statistic results and analysis of two databases on the EAST tokamak are presented. supported by the National Magnetic Confinement Fusion Science Program of China (No. 2014GB103000)

  5. The development of health technology assessment.

    Science.gov (United States)

    Banta, David

    2003-02-01

    The field of health technology assessment (HTA) is still relatively new, but it has shown remarkable growth over the last decade, having spread first from the United States to Europe, and now to the entire world. HTA seeks to couple evidence with decision-making, and thus has similarities to evidence-based health care and evidence-based policy-making. The early history of HTA, beginning around 1975, reveals a first period of synthesising available evidence-principally that dealing with efficacy and cost-effectiveness of health care interventions-so as to put it in a format helpful to health policy-makers, especially those in national governments. From 1985 or so, the focus of the second period was on seeking more effective links with these policy-makers, particularly in Europe. The most recent period, beginning in the late 1990s, has been increasingly devoted to more effective dissemination and implementation in order to influence administrators and clinicians. While early assessments tended to focus on large, expensive, machine-based technologies, the scope has gradually widened to include smaller technologies, 'softer' technologies (such as counselling), and health care needs. Actual assessments have also taken on broader issues, such as organisational, social, and ethical implications. In the Member States of the European Union (EU), HTA activities are increasingly visible, and almost all now have a national focus for HTA associated with the Ministry of Health or its equivalent. Central and Eastern European countries are also developing HTA activities. Most recently, HTA has been highlighted by health policy documents from the European Commission. It seems likely that HTA will in the future be institutionalised in some form as part of EU activities.

  6. Spatial database for a global assessment of undiscovered copper resources: Chapter Z in Global mineral resource assessment

    Science.gov (United States)

    Dicken, Connie L.; Dunlap, Pamela; Parks, Heather L.; Hammarstrom, Jane M.; Zientek, Michael L.; Zientek, Michael L.; Hammarstrom, Jane M.; Johnson, Kathleen M.

    2016-07-13

    As part of the first-ever U.S. Geological Survey global assessment of undiscovered copper resources, data common to several regional spatial databases published by the U.S. Geological Survey, including one report from Finland and one from Greenland, were standardized, updated, and compiled into a global copper resource database. This integrated collection of spatial databases provides location, geologic and mineral resource data, and source references for deposits, significant prospects, and areas permissive for undiscovered deposits of both porphyry copper and sediment-hosted copper. The copper resource database allows for efficient modeling on a global scale in a geographic information system (GIS) and is provided in an Esri ArcGIS file geodatabase format.

  7. Tiger Team Assessment, Energy Technology Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

  8. Technology assessment of wind energy conversion systems

    Energy Technology Data Exchange (ETDEWEB)

    Meier, B. W.; Merson, T. J.

    1980-09-01

    Environmental data for wind energy conversion systems (WECSs) have been generated in support of the Technology Assessment of Solar Energy (TASE) program. Two candidates have been chosen to characterize the WECS that might be deployed if this technology makes a significant contribution to the national energy requirements. One WECS is a large machine of 1.5-MW-rated capacity that can be used by utilities. The other WECS is a small machine that is characteristic of units that might be used to meet residential or small business energy requirements. Energy storage systems are discussed for each machine to address the intermittent nature of wind power. Many types of WECSs are being studied and a brief review of the technology is included to give background for choosing horizontal axis designs for this study. Cost estimates have been made for both large and small systems as required for input to the Strategic Environmental Assessment Simulation (SEAS) computer program. Material requirements, based on current generation WECSs, are discussed and a general discussion of environmental impacts associated with WECS deployment is presented.

  9. Surgical research using national databases.

    Science.gov (United States)

    Alluri, Ram K; Leland, Hyuma; Heckmann, Nathanael

    2016-10-01

    Recent changes in healthcare and advances in technology have increased the use of large-volume national databases in surgical research. These databases have been used to develop perioperative risk stratification tools, assess postoperative complications, calculate costs, and investigate numerous other topics across multiple surgical specialties. The results of these studies contain variable information but are subject to unique limitations. The use of large-volume national databases is increasing in popularity, and thorough understanding of these databases will allow for a more sophisticated and better educated interpretation of studies that utilize such databases. This review will highlight the composition, strengths, and weaknesses of commonly used national databases in surgical research.

  10. ELECTRIC INFRASTRUCTURE TECHNOLOGY, TRAINING, AND ASSESSMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    TREMEL, CHARLES L

    2007-06-28

    The objective of this Electric Infrastructure Technology, Training and Assessment Program was to enhance the reliability of electricity delivery through engineering integration of real-time technologies for wide-area applications enabling timely monitoring and management of grid operations. The technologies developed, integrated, tested and demonstrated will be incorporated into grid operations to assist in the implementation of performance-based protection/preventive measures into the existing electric utility infrastructure. This proactive approach will provide benefits of reduced cost and improved reliability over the typical schedule-based and as needed maintenance programs currently performed by utilities. Historically, utilities have relied on maintenance and inspection programs to diagnose equipment failures and have used the limited circuit isolation devices, such as distribution main circuit breakers to identify abnormal system performance. With respect to reliable problem identification, customer calls to utility service centers are often the sole means for utilities to identify problem occurrences and determine restoration methodologies. Furthermore, monitoring and control functions of equipment and circuits are lacking; thus preventing timely detection and response to customer outages. Finally, the two-way flow of real-time system information is deficient, depriving decision makers of key information required to effectively manage and control current electric grid demands to provide reliable customer service in abnormal situations. This Program focused on advancing technologies and the engineering integration required to incorporate them into the electric grid operations to enhance electrical system reliability and reduce utility operating costs.

  11. Development of Seismic Safety Assessment Technology for Containment Structure

    Energy Technology Data Exchange (ETDEWEB)

    Jang, J.B.; Suh, Y.P.; Lee, J.R. [Korea Electric Power Research Institute, Taejon (Korea)

    2002-07-01

    This final report is made based on the research results of seismic analysis and seismic margin assessment field, carried out during 3rd stage ('01.4.1{approx}'02.3.31) under financial support of MOST(Ministry of Science and Technology). The objective of this research is to develop the soil - structure interaction analysis technique with high reliability, the main research subjects, performed during 3rd stage are as follows. 1) Preparation of user's guide manual for SSI analysis with high accuracy. 2) Sensitivity analysis of effective shear strain and seismic input motion. 3) Database construction of Hualien earthquake recorded data. (author). 21 refs., 27 figs., 2 tabs.

  12. Development of Seismic Safety Assessment Technology for Containment Structure

    Energy Technology Data Exchange (ETDEWEB)

    Jang, J.B.; Suh, Y.P.; Lee, J.R. [Korea Electric Power Research Institute, Taejon (Korea)

    2002-07-01

    This final report is made based on the research results of seismic analysis and seismic margin assessment field, carried out during 3rd stage ('01.4.1{approx}'02.3.31) under financial support of MOST(Ministry of Science and Technology). The objective of this research is to develop the soil - structure interaction analysis technique with high reliability, the main research subjects, performed during 3rd stage are as follows. 1) Preparation of user's guide manual for SSI analysis with high accuracy. 2) Sensitivity analysis of effective shear strain and seismic input motion. 3) Database construction of Hualien earthquake recorded data. (author). 21 refs., 27 figs., 2 tabs.

  13. ['Medical technology assessment'; more than just efficacy].

    Science.gov (United States)

    Buskens, E

    2000-03-25

    'Medical technology assessment' means investigating the developments, costs and effects of medical technologies. Practising physicians increasingly are confronted with consequences of management based on such research results. In order to follow and participate in the discussion they should be aware of this and know the jargon. In policy problems, measures of effect in natural units (e.g. cardiovascular mortality) offer advantages over measures of clinical findings (e.g. decrease of the serum cholesterol levels). Survival in various health states and disorders can be compared by multiplying the number of life years gained by a factor for the quality of life in those years. Costs are usually expressed in monetary terms. These may be calculated as direct medical costs on the basis of fees or actual costs for society. The latter is the case when the balancing is based on a societal perspective. The societal perspective enables a more objective assessment of health effects than when a patient perspective is used. 'Incremental cost effectiveness' expresses where extra expenditures will have maximum effect, and bears higher relevance for policy decisions than mean costs per unit of effect. Immaterial matters are more difficult to assess, but should nevertheless be considered in selecting the policy to be implemented.

  14. Technology Assessment Need: Review on Attractiveness and Competitiveness

    Science.gov (United States)

    Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

    2017-06-01

    Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

  15. Development of a computational database for probabilistic safety assessment of nuclear research reactors

    Energy Technology Data Exchange (ETDEWEB)

    Macedo, Vagner S.; Oliveira, Patricia S. Pagetti de; Andrade, Delvonei Alves de, E-mail: vagner.macedo@usp.br, E-mail: patricia@ipen.br, E-mail: delvonei@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The objective of this work is to describe the database being developed at IPEN - CNEN / SP for application in the Probabilistic Safety Assessment of nuclear research reactors. The database can be accessed by means of a computational program installed in the corporate computer network, named IPEN Intranet, and this access will be allowed only to professionals previously registered. Data updating, editing and searching tasks will be controlled by a system administrator according to IPEN Intranet security rules. The logical model and the physical structure of the database can be represented by an Entity Relationship Model, which is based on the operational routines performed by IPEN - CNEN / SP users. The web application designed for the management of the database is named PSADB. It is being developed with MySQL database software and PHP programming language is being used. Data stored in this database are divided into modules that refer to technical specifications, operating history, maintenance history and failure events associated with the main components of the nuclear facilities. (author)

  16. Assessing the performance of health technology assessment organizations: a framework.

    Science.gov (United States)

    Lafortune, Louise; Farand, Lambert; Mondou, Isabelle; Sicotte, Claude; Battista, Renaldo

    2008-01-01

    In light of growing demands for public accountability, the broadening scope of health technology assessment organizations (HTAOs) activities and their increasing role in decision-making underscore the importance for them to demonstrate their performance. Based on Parson's social action theory, we propose a conceptual model that includes four functions an organization needs to balance to perform well: (i) goal attainment, (ii) production, (iii) adaptation to the environment, and (iv) culture and values maintenance. From a review of the HTA literature, we identify specific dimensions pertaining to the four functions and show how they relate to performance. We compare our model with evaluations reported in the scientific and gray literature to confirm its capacity to accommodate various evaluation designs, contexts of evaluation, and organizational models and perspectives. Our findings reveal the dimensions of performance most often assessed and other important ones that, hitherto, remain unexplored. The model provides a flexible and theoretically grounded tool to assess the performance of HTAOs.

  17. A conceptual framework for energy technology sustainability assessment

    CSIR Research Space (South Africa)

    Musango, Josephine K

    2011-03-01

    Full Text Available the framework of incorporating the system dynamics methodology in energy technology assessment theory and practice within the context of sustainable development. The framework provides for technology sustainability assessment, which, in turn, can guide...

  18. Using clinical databases in tertiary nurse education: an innovative application of computer technology.

    Science.gov (United States)

    Cheek, J; Gillham, D; Mills, P

    1998-02-01

    This paper provides an initial report of an educational innovation in nursing that promotes exchange of information and close cooperation between hospitals and a university. Data from a computerized nursing care planning system are used as the basis for the design of the acute care clinical component of the nursing curriculum. The project has been developed with the aim of minimizing the theory-practice gap and making the transition from university to hospital an easier process for students and new graduates. From the very early stages of the project, it was recognized that the introduction of new computer-based innovations or educational technology, in itself, would not necessarily improve teaching and learning. Therefore, strong emphasis was placed on how the database would be used as the basis for sound curriculum development while maintaining the clinical and practical focus required by students. Difficulties associated with the project, ranging from lengthy legal negotiations to the challenge of integrating a curriculum strongly based on critical reflection and problem-solving with a highly prescriptive hospital database are reported. The project not only provides an example of the efficient exchange and use of hospital-based data for teaching purposes but also provides the groundwork for many potential and exciting developments in national and international nursing data exchange.

  19. Development Method of Wireless Application Based on Wireless Makeup Language and Web Database Technology

    Institute of Scientific and Technical Information of China (English)

    ZHANG Li; SHAO Shi-huang; WANG Jian; YIN Mei-hua

    2002-01-01

    Wireless technology is a new emerging delivery networks and development scheme of wireless internet is given widely attention currently. In order to make international visitors to surge education website at any time, anywhere by mobile handsets. The communication method of web database, such as CGI, ISAPI, JDBC and so on have been aralyzed and a new Active Server Page &Wireless Makeup Language (ASP-WML) based approach is presented. The dynamical refreshment of the homepage of wireless website and the automatic query of main information have been realized. At last, the wireless website of Dong Hua University is taken as an example to testify the possibility of wireless website design which is mentioned above.

  20. Quality assurance and technology assessment: pieces of a larger puzzle.

    Science.gov (United States)

    McDonald, I G

    2000-01-01

    Increasing integration of health care and health services research has resulted in an overlap between disciplines involved in the evaluation of clinical practice. We have examined the relationships of quality assurance (QA), medical technology assessment (TA), clinical epidemiology (CE) and evidence-based medicine (EBM) from an historical perspective. Clinicians, patients and administrators need local information on effectiveness of routine care. Information from trials alone, efficacy data, will not suffice nor can it be culled from administrative databases designed for other purposes. The current activities of QA should be therefore be expanded to include the study of the effectiveness of interventions in terms of appropriateness of use, patient outcomes and study of the determinants of outcomes, as seen from the perspective of doctors, patients, administrators and policy makers, using data collected during the course of routine patient care. With the assistance of information technology, with methodological support and multidisciplinary cooperation, clinicians can do this as part of a more broadly defined clinical research. Quality assurance and TA both evolved with the objective of studying clinical care but have quite different historical roots, complementary perspectives and objectives, use different methods and involve a different set of practitioners. Quality assurance is a type of 'formative' evaluation conducted in the clinical setting using indicators as flags of process or outcome events of interest, simple surveys and audit studies. Its primary aim is to achieve incremental improvement rather than to simply pass judgement. An important underlying assumption is that health care behaves as a complex dynamic system. Technology assessment, a form of summative evaluation with an orientation towards policy, synthesises information from formal scientific studies of efficacy in the form of clinical trials and studies of cost-effectiveness. For the evaluation

  1. Constructive technology assessment of gene expression profiling for breast cancer

    NARCIS (Netherlands)

    Retèl, Valesca Pavlawna

    2011-01-01

    Constructive Technology Assessment (CTA) can be used as a complementary approach to Health Technology Assessment (HTA), especially for the early and dynamic introduction of new technologies in a controlled way. CTA is based on the idea that during the course of technology development, choices are co

  2. Differences among formulary submission guidelines: implications for health technology assessment.

    Science.gov (United States)

    Mauskopf, Josephine; Walter, Jeffrey; Birt, Julie; Bowman, Lee; Copley-Merriman, Catherine; Drummond, Michael

    2011-07-01

    This article provides a detailed understanding of the differences in selected formulary submission guidelines supplied by various health technology assessment (HTA) agencies and indicates how these differences can impact the evidence base used to populate the HTA. Detailed summaries of the recommended methods for evidence generation, organized by topic areas relevant for clinical and economic data, for twelve countries in Europe, North America, and Australia where HTA processes are well developed were prepared. Using these summaries, we provide examples of the likely impact these differences in recommended methods could have on the evidence base used to evaluate new health technologies. Areas where recommendations differed included methodologies for systematic literature reviews (e.g., preferred databases and study designs for inclusion); selection of appropriate comparators; guidance on critical appraisal and synthesis of clinical evidence; appropriate sources for health value measures, resource use, and cost data; and approaches to uncertainty analyses. Performing literature searches that capture all relevant studies and then creating subsets of the literature based on a listing of country-specific requirements could allow for direct comparison of the evidence bases associated with the different guidelines. If the formulary submission guidelines were followed as written, different (although overlapping) bodies of evidence likely would be generated for each country, which could contribute to disparate assessments and recommendations. This comparison of the formulary submission guidelines could contribute to an understanding of why clinical and reimbursement decisions vary across countries.

  3. Mobile technology for mental health assessment.

    Science.gov (United States)

    Areàn, Patricia A; Hoa Ly, Kien; Andersson, Gerhard

    2016-06-01

    Assessment and outcome monitoring are critical for the effective detection and treatment of mental illness. Traditional methods of capturing social, functional, and behavioral data are limited to the information that patients report back to their health care provider at selected points in time. As a result, these data are not accurate accounts of day-to-day functioning, as they are often influenced by biases in self-report. Mobile technology (mobile applications on smartphones, activity bracelets) has the potential to overcome such problems with traditional assessment and provide information about patient symptoms, behavior, and functioning in real time. Although the use of sensors and apps are widespread, several questions remain in the field regarding the reliability of off-the-shelf apps and sensors, use of these tools by consumers, and provider use of these data in clinical decision-making.

  4. [Indirect costs in health technology assessment].

    Science.gov (United States)

    Jakubczyk, Michał; Wrona, Witold; Macioch, Tomasz; Golicki, Dominik; Niewada, Maciej; Hermanowski, Tomasz

    2010-01-01

    In the health technology assessment it is crucial to define the perspective of the analysis. When the societal perspective is chosen it is necessary to include all the costs incurred by the society, also the costs of lost productivity resulting from absence of sick employees from work or their reduced efficiency at work. The aim of this article is to present the notion of indirect costs, their importance in health technology assessment and the methods of calculation. The economic literature has been reviewed for the state of knowledge on indirect costs. Three methods of calculation are described: human capital method, friction cost method or health state valuation. Indirect costs in Western European countries can amount to more than half of total costs attributed to the illness and its treatment. In the literature there is no consensus regarding the proper method of indirect costs calculation. It is necessary to conduct further theoretical and empirical research in the area of indirect costs and enhance discussion among Polish pharmacoeconomists.

  5. Life cycle assessment of biogas upgrading technologies.

    Science.gov (United States)

    Starr, Katherine; Gabarrell, Xavier; Villalba, Gara; Talens, Laura; Lombardi, Lidia

    2012-05-01

    This article evaluates the life cycle assessment (LCA) of three biogas upgrading technologies. An in-depth study and evaluation was conducted on high pressure water scrubbing (HPWS), as well as alkaline with regeneration (AwR) and bottom ash upgrading (BABIU), which additionally offer carbon storage. AwR and BABIU are two novel technologies that utilize waste from municipal solid waste incinerators - namely bottom ash (BA) and air pollution control residues (APC) - and are able to store CO(2) from biogas through accelerated carbonation processes. These are compared to high pressure water scrubbing (HPWS) which is a widely used technology in Europe. The AwR uses an alkaline solution to remove the CO(2) and then the solution - rich in carbonate and bicarbonate ions - is regenerated through carbonation of APC. The BABIU process directly exposes the gas to the BA to remove and immediately store the CO(2), again by carbonation. It was determined that the AwR process had an 84% higher impact in all LCA categories largely due to the energy intensive production of the alkaline reactants. The BABIU process had the lowest impact in most categories even when compared to five other CO(2) capture technologies on the market. AwR and BABIU have a particularly low impact in the global warming potential category as a result of the immediate storage of the CO(2). For AwR, it was determined that using NaOH instead of KOH improves its environmental performance by 34%. For the BABIU process the use of renewable energies would improve its impact since accounts for 55% of the impact. Copyright © 2011 Elsevier Ltd. All rights reserved.

  6. Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

    Science.gov (United States)

    Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

    2015-11-30

    Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner.

  7. Relational databases

    CERN Document Server

    Bell, D A

    1986-01-01

    Relational Databases explores the major advances in relational databases and provides a balanced analysis of the state of the art in relational databases. Topics covered include capture and analysis of data placement requirements; distributed relational database systems; data dependency manipulation in database schemata; and relational database support for computer graphics and computer aided design. This book is divided into three sections and begins with an overview of the theory and practice of distributed systems, using the example of INGRES from Relational Technology as illustration. The

  8. Cloud Databases: A Paradigm Shift in Databases

    Directory of Open Access Journals (Sweden)

    Indu Arora

    2012-07-01

    Full Text Available Relational databases ruled the Information Technology (IT industry for almost 40 years. But last few years have seen sea changes in the way IT is being used and viewed. Stand alone applications have been replaced with web-based applications, dedicated servers with multiple distributed servers and dedicated storage with network storage. Cloud computing has become a reality due to its lesser cost, scalability and pay-as-you-go model. It is one of the biggest changes in IT after the rise of World Wide Web. Cloud databases such as Big Table, Sherpa and SimpleDB are becoming popular. They address the limitations of existing relational databases related to scalability, ease of use and dynamic provisioning. Cloud databases are mainly used for data-intensive applications such as data warehousing, data mining and business intelligence. These applications are read-intensive, scalable and elastic in nature. Transactional data management applications such as banking, airline reservation, online e-commerce and supply chain management applications are write-intensive. Databases supporting such applications require ACID (Atomicity, Consistency, Isolation and Durability properties, but these databases are difficult to deploy in the cloud. The goal of this paper is to review the state of the art in the cloud databases and various architectures. It further assesses the challenges to develop cloud databases that meet the user requirements and discusses popularly used Cloud databases.

  9. Dynamic Real Time Distributed Sensor Network Based Database Management System Using XML, JAVA and PHP Technologies

    Directory of Open Access Journals (Sweden)

    D. Sudharsan

    2012-03-01

    Full Text Available Wireless Sensor Network (WSN is well known for distributed real time systems for various applications. In order to handle the increasing functionality and complexity of high resolution spatio-temporal sensorydatabase, there is a strong need for a system/tool to analyse real time data associated with distributed sensor network systems. There are a few package/systems available to maintain the near real time database system/management, which are expensive and requires expertise. Hence, there is a need for a cost effective and easy to use dynamic real-time data repository system to provide real time data (raw as well as usable units in a structured format. In the present study, a distributed sensor network system, with Agrisens (AS and FieldServer (FS as well as FS-based Flux Tower and FieldTwitter, is used, which consists of network of sensors and field images to observe/collect the real time weather, crop and environmental parameters for precision agriculture. The real time FieldServer-based spatio-temporal high resolution dynamic sensory data was converted into Dynamic Real-Time Database Management System (DRTDBMS in a structured format for both raw and converted (with usable units data. A web interface has been developed to access the DRTDBMS and exclusive domain has been created with the help of open/free Information and Communication Technology (ICT tools in Extendable Markup Language (XML using (Hypertext preprocessor PHP algorithms and with eXtensible Hyper Text Markup Language (XHTML self-scripting. The proposed DRTDBMS prototype, called GeoSense DRTDBMS, which is a part of the ongoing IndoJapan initiative ‘ICT and Sensor Network based Decision Support Systems in Agriculture and EnvironmentAssessment’, will be integrated with GeoSense cloud server to provide database (dynamic real-time weather/soil/crop and environmental parameters and modeling services (crop water requirement and simulated rice yield modeling. GeoSense-cloud server

  10. Technology in Schools: Suggestions, Tools and Guidelines for Assessing Technology in Elementary and Secondary Education.

    Science.gov (United States)

    Ogle, Tom; Branch, Morgan; Canada, Bethann; Christmas, Oren; Clement, John; Fillion, Judith; Goddard, Ed; Loudat, N. Blair; Purwin, Tom; Rogers, Andy; Schmitt, Carl; Vinson, Mike

    This handbook is intended to facilitate the assessment of technology used to support elementary and secondary education in the United States. It is designed to help decision makers and technology users prepare, collect and assess information about whether and how technology is being used in their school systems. To make assessments that will be…

  11. What Do They Understand? Using Technology to Facilitate Formative Assessment

    Science.gov (United States)

    Mitten, Carolyn; Jacobbe, Tim; Jacobbe, Elizabeth

    2017-01-01

    Formative assessment is so important to inform teachers' planning. A discussion of the benefits of using technology to facilitate formative assessment explains how four primary school teachers adopted three different apps to make their formative assessment more meaningful and useful.

  12. Database development of chemical thermodynamics of protactinium for performance assessment of HLW geological disposal system

    Energy Technology Data Exchange (ETDEWEB)

    Shibutani, Tomoki; Shibutani, Sanae; Yui, Mikazu [Power Reactor and Nuclear Fuel Development Corp., Tokai, Ibaraki (Japan). Tokai Works

    1998-03-01

    In the performance analysis of geological disposal system of high-level radioactive waste (HLW), solubilities of radioactive elements are estimated by thermodynamic calculation. The reliable thermodynamic database (TDB) is needed for solubility estimation. In this report, thermodynamic data for protactinium solid and aqueous species for performance assessment were selected. For the refinement of previous PNC in house thermodynamic database (PNC-TDB), existing literatures data were surveyed and reliable thermodynamic data were selected under consideration of the scientific defensibility and the consistency with the whole PNC-TDB. The estimated solubility using refined PNC-TDB was higher than measured value. We have confirmed the refined data-set of Pa to be conservative for solubility estimation of performance assessment. (author)

  13. A Methodology for the Development of a Reliability Database for an Advanced Reactor Probabilistic Risk Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Grabaskas, Dave; Brunett, Acacia J.; Bucknor, Matthew

    2016-06-26

    GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory are currently engaged in a joint effort to modernize and develop probabilistic risk assessment (PRA) techniques for advanced non-light water reactors. At a high level the primary outcome of this project will be the development of next-generation PRA methodologies that will enable risk-informed prioritization of safety- and reliability-focused research and development, while also identifying gaps that may be resolved through additional research. A subset of this effort is the development of a reliability database (RDB) methodology to determine applicable reliability data for inclusion in the quantification of the PRA. The RDB method developed during this project seeks to satisfy the requirements of the Data Analysis element of the ASME/ANS Non-LWR PRA standard. The RDB methodology utilizes a relevancy test to examine reliability data and determine whether it is appropriate to include as part of the reliability database for the PRA. The relevancy test compares three component properties to establish the level of similarity to components examined as part of the PRA. These properties include the component function, the component failure modes, and the environment/boundary conditions of the component. The relevancy test is used to gauge the quality of data found in a variety of sources, such as advanced reactor-specific databases, non-advanced reactor nuclear databases, and non-nuclear databases. The RDB also establishes the integration of expert judgment or separate reliability analysis with past reliability data. This paper provides details on the RDB methodology, and includes an example application of the RDB methodology for determining the reliability of the intermediate heat exchanger of a sodium fast reactor. The example explores a variety of reliability data sources, and assesses their applicability for the PRA of interest through the use of the relevancy test.

  14. Technology-Based Classroom Assessments: Alternatives to Testing

    Science.gov (United States)

    Salend, Spencer J.

    2009-01-01

    Although many teachers are using new technologies to differentiate instruction and administer tests, educators are also employing a range of technology-based resources and strategies to implement a variety of classroom assessments as alternatives to standardized and teacher-made testing. Technology-based classroom assessments focus on the use of…

  15. Technology-Based Classroom Assessments: Alternatives to Testing

    Science.gov (United States)

    Salend, Spencer J.

    2009-01-01

    Although many teachers are using new technologies to differentiate instruction and administer tests, educators are also employing a range of technology-based resources and strategies to implement a variety of classroom assessments as alternatives to standardized and teacher-made testing. Technology-based classroom assessments focus on the use of…

  16. 75 FR 79354 - Assessment Technology Standards Request for Information (RFI)

    Science.gov (United States)

    2010-12-20

    ..., virtual worlds, mobile devices, and simulations. 3.2.28 Accessibility. How do technology standards ensure... Assessment Technology Standards Request for Information (RFI) AGENCY: Office of Innovation and Improvement, U... pertaining to assessment technology standards. SUMMARY: The purpose of this RFI is to collect...

  17. Building Inventory Database on the Urban Scale Using GIS for Earthquake Risk Assessment

    Science.gov (United States)

    Kaplan, O.; Avdan, U.; Guney, Y.; Helvaci, C.

    2016-12-01

    The majority of the existing buildings are not safe against earthquakes in most of the developing countries. Before a devastating earthquake, existing buildings need to be assessed and the vulnerable ones must be determined. Determining the seismic performance of existing buildings which is usually made with collecting the attributes of existing buildings, making the analysis and the necessary queries, and producing the result maps is very hard and complicated procedure that can be simplified with Geographic Information System (GIS). The aim of this study is to produce a building inventory database using GIS for assessing the earthquake risk of existing buildings. In this paper, a building inventory database for 310 buildings, located in Eskisehir, Turkey, was produced in order to assess the earthquake risk of the buildings. The results from this study show that 26% of the buildings have high earthquake risk, 33% of the buildings have medium earthquake risk and the 41% of the buildings have low earthquake risk. The produced building inventory database can be very useful especially for governments in dealing with the problem of determining seismically vulnerable buildings in the large existing building stocks. With the help of this kind of methods, determination of the buildings, which may collapse and cause life and property loss during a possible future earthquake, will be very quick, cheap and reliable.

  18. Development and Dissemination of a Nationwide Helium Database for a National Assessment of Helium Resources.

    Science.gov (United States)

    Brennan, S. T.; East, J. A., II; Garrity, C. P.

    2015-12-01

    In 2013, Congress passed the Helium Stewardship Act requiring the U.S. Geological Survey (USGS) to undertake a national helium gas resource assessment to determine the nation's helium resources. An important initial component necessary to complete this assessment was the development of a comprehensive database of Helium (He) concentrations from petroleum exploration wells. Because Helium is often used as the carrier gas for compositional analyses for commercial and exploratory oil and gas wells, this limits the available helium concentration data. A literature search in peer-reviewed publications, state geologic survey databases, USGS energy geochemical databases, and the Bureau of Land Management databases provided approximately 16,000 data points from wells that had measurable He concentrations in the gas composition analyses. The data from these wells includes, date of sample collection, American Petroleum Institute well number, formation name, field name, depth of sample collection, and location. The gas compositional analyses, some performed as far back as 1934, do not all have the same level of precision and accuracy, therefore the date of the analysis is critical to the assessment as it indicates the relative amount of uncertainty in the analytical results. Non-proprietary data was used to create a GIS based interactive web interface that allows users to visualize, inspect, interact, and download our most current He data. The user can click on individual locations to see the available data at that location, as well as zoom in and out on a data density map. Concentrations on the map range from .04 mol% (lowest concentration of economic value) to 12% (highest naturally occurring values). This visual interface will allow users to develop a rapid appreciation of the areas with the highest potential for high helium concentrations within oil and gas fields.

  19. Development and application of indices using large volcanic databases for a global hazard and risk assessment

    Science.gov (United States)

    Brown, Sarah; Auker, Melanie; Cottrell, Elizabeth; Delgado Granados, Hugo; Loughlin, Sue; Ortiz Guerrero, Natalie; Sparks, Steve; Vye-Brown, Charlotte; Taskforce, Indices

    2015-04-01

    The Global Volcano Model (GVM) and IAVCEI were commissioned by the United Nations Office for Disaster Risk Reduction to produce a global assessment of volcanic hazard and risk for the Global Assessment Report 2015 (GAR15). This involved presenting both an introduction to volcanology and developing indices to assess hazard and risk on a global scale. To this end two open-access databases were of utmost importance: the Global Volcanism Program's Volcanoes of the World (http://www.volcano.si.edu) and the Large Magnitude Explosive Volcanic Eruptions database (LaMEVE; http://www.bgs.ac.uk/vogripa/). Indices were developed to enable a relative global assessment cognisant of data uncertainty and availability to broadly identify how hazard and risk varies around the world, the extent of monitoring and strengths and limitations in knowledge. The accessibility of both physical (e.g. volcano, eruption) and social data is crucial to our understanding of past behaviour, forecasting probable future behaviour and the potential impacts on communities. Such data is regionally highly variable and the eruption record worsens back in time. The Volcanic Hazard Index (VHI) was designed to quantify hazard levels globally, based on the Holocene eruption record. Vulnerability to eruptions was measured using the Population Exposure Index, which weights the population within 100 km of volcanoes by area and historical fatalities. The combination of these indices provides an indicator of population risk at individual volcanoes. The VHI was also combined with the total populations living within 30 km of volcanoes in each country to develop an understanding of the global distribution of volcano threat, and to rank countries by this measure. About half of the historically active volcanoes have insufficient information to adequately calculate VHI and these are highlighted as requiring future research. A database currently in development, GLOVOREMID, collates monitoring data to understand

  20. Assessing the impact of new technology on complex sociotechnical systems

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2016-08-01

    Full Text Available African Journal of Industrial Engineering Month Year Vol __(_) pp 1-3 ASSESSING THE IMPACT OF NEW TECHNOLOGY ON COMPLEX SOCIOTECHNICAL SYSTEMS R. Oosthuizen & L. Pretorius Department of Engineering and Technology Management University of Pretoria...

  1. Dietary assessment in Africa: Integration with innovative technology ...

    African Journals Online (AJOL)

    Dietary assessment in Africa: Integration with innovative technology. ... African Journal of Food, Agriculture, Nutrition and Development ... an opportunity for exploring the benefits and general acceptance of using technology to improve health.

  2. Space Launch System Upper Stage Technology Assessment

    Science.gov (United States)

    Holladay, Jon; Hampton, Bryan; Monk, Timothy

    2014-01-01

    discussed in light of the various missions. For each mission there are several trajectory options and each will be discussed in terms of delta-v required and transit duration. Each propulsion system will be modeled, sized, and judged based on their applicability to the whole range of beyond LEO missions. Criteria for scoring will include the resulting dry mass of the stage, resulting propellant required, time to destination, and an assessment of key enabling technologies. In addition to the larger metrics, this paper will present the results of several coupled sensitivity studies. The ultimate goals of these tools and studies are to provide NASA with the most mass-, technology-, and cost-effective in-space stage for its future exploration missions.

  3. DoD Current State for Software Technology Readiness Assessments

    Science.gov (United States)

    2010-04-01

    DoD Current State for Software Technology Readiness Assessments Systems & Software Technology Conference April 2010 Cynthia Dion-Schwarz, Ph.D...DoD Current State for Software Technology Readiness Assessments 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...public release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the 22nd Systems and Software Technology Conference (SSTC), 26-29 April

  4. Expanding the applicability of Heallth Technology Assessments

    DEFF Research Database (Denmark)

    Draborg, Eva; Hansen, Helle Ploug

    2012-01-01

    external validity and the effectiveness of a technology in normal daily practice. SR and HTAs favors internal valid trials and thereby proofs of possible cause-effect relationship between a technology and outcomes but at the expense of the wider perspectives of a technology. HTA have a policy...

  5. Assessment of Ga2O3 technology

    Science.gov (United States)

    2016-09-15

    architecture [60]. ....................................................................... 10 Figure 5: Photograph of 4-inch diameter Ga2O3 wafer...breakdown voltages can provide orders of magnitude reduction in system size, cost and weight. Figure 4: A More-Electric Aircraft (MEA) architecture [60...Technology base is narrowly located in Japan . Mainstream technology. Czochralski • Mature technology base. • Crucible-free crystal growth

  6. History of healthcare technology assessment in Japan.

    Science.gov (United States)

    Hisashige, Akinori

    2009-07-01

    There has been a rapid growth of healthcare technology assessment (HTA) activities among health service researchers and physicians in Japan in the younger generation since the mid-1980s. HTA has become visible since the Ministry of Health, Labor, and Welfare (MHLW) set up the several committees related to HTA in the late 1990s. The MHLW had to participate in regulatory and administrative reform, coping with the serious economic stagnation since 1991, following the economic recession in the 1980s. However, HTA has not been developed as expected. The most important failure is that the application of HTA to health policy has been neglected by the MHLW. Only application to clinical practice has been implemented by developing evidence-based clinical practice guidelines. The MHLW had the main aim of containing costs by reducing excess or useless healthcare services through guidelines, rather than to implement a radical reform. Without a central organization for HTA, several researchers have still continued to do HTA studies, but most researchers and physicians promoting HTA have been moved into diverse related areas. Ultimately, increasing efficiency may be the only way of reconciling rising demands for health care with public financing constraints. Therefore, the reconsideration and reorganization of HTA, which covers not only healthcare services but also the healthcare system as a whole, is becoming an urgent matter for healthcare reform.

  7. Life cycle assessment of emerging technologies

    DEFF Research Database (Denmark)

    Valsasina, Lucia; Pizzol, Massimo; Smetana, Sergiy;

    2017-01-01

    Abstract Milk is becoming a key food commodity as population grows and demand increases. The treatment of milk to extend its shelf life is thus an important step in avoiding losses and optimizing resource use. The drawbacks of the most common treatments for shelf stable milk are the loss of nutri......Abstract Milk is becoming a key food commodity as population grows and demand increases. The treatment of milk to extend its shelf life is thus an important step in avoiding losses and optimizing resource use. The drawbacks of the most common treatments for shelf stable milk are the loss...... shelf life. A life cycle assessment was performed comparing this emerging technology to the common thermal treatment: indirect ultra-high temperature sterilisation combined with non-aseptic homogenisation. The results show that high-pressure based processing has a lower environmental burden compared...... to the high-temperature based processing, already at pilot-scale, and this difference is primarily due to the lower electricity consumption. Additionally, upscaling considerations were made using power laws and scenario analysis to simulate future full-scale applications of UHPH. The upscaling shows...

  8. A selected thermodynamic database for REE to be used in HLNW performance assessment exercises

    Energy Technology Data Exchange (ETDEWEB)

    Spahiu, K.; Bruno, J. [MBT Tecnologia Ambiental, Cerdanyola (Spain)

    1995-01-01

    A selected thermodynamic database for the Rare Earth Elements (REE) to be used in the safety assessment of high-level nuclear waste deposition has been compiled. Thermodynamic data for the aqueous species of the REE with the most important ligands relevant for granitic groundwater conditions have been selected and validated. The dominant soluble species under repository conditions are the carbonate complexes of REE. The solubilities of the oxides, hydroxides, carbonates, hydroxycarbonates, phosphates and other important solids have been selected and validated. Solubilities and solubility limiting solids in repository conditions have been estimated with the selected database. At the initial stages of fuel dissolution, the UO{sub 2} matrix dissolution will determine the concentrations of REE. Later on, solid phosphates, hydroxycarbonates and carbonates may limit their solubility. Recommendations for further studies on important systems in repository conditions have been presented. 136 refs, 13 figs, 16 tabs.

  9. Health technology assessment of image-guided radiotherapy (IGRT): A systematic review of current evidence

    OpenAIRE

    Arabloo, Jalal; Hamouzadeh, Pejman; Mousavinezhad, Seyedeh Maryam; Mobinizadeh, Mohammadreza; Olyaeemanesh, Alireza; Pooyandjoo, Morvarid

    2016-01-01

    Background: Image-guided radiotherapy used multiple imaging during the radiation therapy course to improve the precision and accuracy of health care provider's treatment. Objectives: This study aims to assess the safety, effectiveness and economic aspects of image-guided radiation therapy for decision-making about this technology in Iran. Methods: In this study, the most important medical databases such as PubMed and Cochrane Library were searched until November 2014. The systematic reviews, ...

  10. Integrating Data-Based Decision Making, Assessment for Learning and Diagnostic Testing in Formative Assessment

    Science.gov (United States)

    Van der Kleij, Fabienne M.; Vermeulen, Jorine A.; Schildkamp, Kim; Eggen, Theo J. H .M.

    2015-01-01

    Recent research has highlighted the lack of a uniform definition of formative assessment, although its effectiveness is widely acknowledged. This paper addresses the theoretical differences and similarities amongst three approaches to formative assessment that are currently most frequently discussed in educational research literature: data-based…

  11. Post-Caesarean Section Surgical Site Infection Surveillance Using an Online Database and Mobile Phone Technology.

    Science.gov (United States)

    Castillo, Eliana; McIsaac, Corrine; MacDougall, Bhreagh; Wilson, Douglas; Kohr, Rosemary

    2017-08-01

    Obstetric surgical site infections (SSIs) are common and expensive to the health care system but remain under reported given shorter postoperative hospital stays and suboptimal post-discharge surveillance systems. SSIs, for the purpose of this paper, are defined according to the Center for Disease Control and Prevention (1999) as infection incurring within 30 days of the operative procedure (in this case, Caesarean section [CS]). Demonstrate the feasibility of real-life use of a patient driven SSIs post-discharge surveillance system consisting of an online database and mobile phone technology (surgical mobile app - how2trak) among women undergoing CS in a Canadian urban centre. Estimate the rate of SSIs and associated predisposing factors. Prospective cohort of consecutive women delivering by CS at one urban Canadian hospital. Using surgical mobile app-how2trak-predetermined demographics, comorbidities, procedure characteristics, and self-reported symptoms and signs of infection were collected and linked to patients' incision self-portraits (photos) on postpartum days 3, 7, 10, and 30. A total of 105 patients were enrolled over a 5-month period. Mean age was 31 years, 13% were diabetic, and most were at low risk of surgical complications. Forty-six percent of surgeries were emergency CSs, and 104/105 received antibiotic prophylaxis. Forty-five percent of patients (47/105) submitted at least one photo, and among those, one surgical site infection was detected by photo appearance and self-reported symptoms by postpartum day 10. The majority of patients whom uploaded photos did so multiple times and 43% of them submitted photos up to day 30. Patients with either a diagnosis of diabetes or self-reported Asian ethnicity were less likely to submit photos. Post-discharge surveillance for CS-related SSIs using surgical mobile app how2trak is feasible and deserves further study in the post-discharge setting. Copyright © 2017. Published by Elsevier Inc.

  12. Similar Reference Image Quality Assessment: A New Database and A Trial with Local Feature Matching

    Science.gov (United States)

    Lu, Qingbo; Zhou, Wengang; Li, Houqiang

    2016-12-01

    Conventionally, the reference image for image quality assessment (IQA) is completely available (full-reference IQA) or unavailable (no-reference IQA). Even for reduced-reference IQA, the features that are used to predict image quality are still extracted from the pristine reference image. However, the pristine reference image is always unavailable in many real scenarios. In contrast, it is convenient to obtain a number of similar reference images via retrieval from the Internet. These similar reference images may share similar contents and scenes with the image to be assessed. In this paper, we attempt to discuss the image quality assessment problem from the view of similar images, i.e. similar reference IQA. Although the similar reference images share similar contents with the degraded image, the difference between them still cannot be ignored. Therefore, we propose an IQA framework based on local feature matching, which can help to identify the similar regions and structures. Then the IQA features are computed only from these similar regions to predict the final image quality score. Besides, since there is no IQA databases for the similar reference IQA problem, we establish a novel IQA database that consists of 272 images from four scenes. The experiments demonstrate that the performance of our scheme goes beyond state-of-the-art no-reference IQA methods and some full-reference IQA algorithms.

  13. Knowledge base technology for CT-DIMS: Report 1. [CT-DIMS (Cutting Tool - Database and Information Management System)

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, E.E.

    1993-05-01

    This report discusses progress on the Cutting Tool-Database and Information Management System (CT-DIMS) project being conducted by the University of Illinois Urbana-Champaign (UIUC) under contract to the Department of Energy. This project was initiated in October 1991 by UIUC. The Knowledge-Based Engineering Systems Research Laboratory (KBESRL) at UIUC is developing knowledge base technology and prototype software for the presentation and manipulation of the cutting tool databases at Allied-Signal Inc., Kansas City Division (KCD). The graphical tool selection capability being developed for CT-DIMS in the Intelligent Design Environment for Engineering Automation (IDEEA) will provide a concurrent environment for simultaneous access to tool databases, tool standard libraries, and cutting tool knowledge.

  14. Needs assessment for next generation computer-aided mammography reference image databases and evaluation studies.

    Science.gov (United States)

    Horsch, Alexander; Hapfelmeier, Alexander; Elter, Matthias

    2011-11-01

    Breast cancer is globally a major threat for women's health. Screening and adequate follow-up can significantly reduce the mortality from breast cancer. Human second reading of screening mammograms can increase breast cancer detection rates, whereas this has not been proven for current computer-aided detection systems as "second reader". Critical factors include the detection accuracy of the systems and the screening experience and training of the radiologist with the system. When assessing the performance of systems and system components, the choice of evaluation methods is particularly critical. Core assets herein are reference image databases and statistical methods. We have analyzed characteristics and usage of the currently largest publicly available mammography database, the Digital Database for Screening Mammography (DDSM) from the University of South Florida, in literature indexed in Medline, IEEE Xplore, SpringerLink, and SPIE, with respect to type of computer-aided diagnosis (CAD) (detection, CADe, or diagnostics, CADx), selection of database subsets, choice of evaluation method, and quality of descriptions. 59 publications presenting 106 evaluation studies met our selection criteria. In 54 studies (50.9%), the selection of test items (cases, images, regions of interest) extracted from the DDSM was not reproducible. Only 2 CADx studies, not any CADe studies, used the entire DDSM. The number of test items varies from 100 to 6000. Different statistical evaluation methods are chosen. Most common are train/test (34.9% of the studies), leave-one-out (23.6%), and N-fold cross-validation (18.9%). Database-related terminology tends to be imprecise or ambiguous, especially regarding the term "case". Overall, both the use of the DDSM as data source for evaluation of mammography CAD systems, and the application of statistical evaluation methods were found highly diverse. Results reported from different studies are therefore hardly comparable. Drawbacks of the DDSM

  15. Rapid Technology Assessment Framework for Land Logistics

    Science.gov (United States)

    2015-03-01

    Economy, Environment, Politics SWOT Strengths, Weaknesses, Opportunities, Threats TRL Technology Readiness Level US United States WHO World Health...structures, processes • Contract management Capability Life -Cycle Management (in support of force modernisation and preparedness...commonly based on projections of the global meta-trends across the physical, social and technological environments. Such discussions are numerous

  16. Beyond checklists: toward an ethical-constructive technology assessment

    NARCIS (Netherlands)

    Kiran, Asle; Oudshoorn, Nelly E.J.; Verbeek, Peter P.C.C.

    2015-01-01

    While many technology assessments (TAs) formally conducted by TA organizations in Europe and the USA have examined the implications of new technologies for ‘quantifiable risks’ regarding safety, health or the environment, they have largely ignored the ethical implications of those technologies.

  17. Methodology of constructive technology assessment in health care

    NARCIS (Netherlands)

    Douma, Kirsten F.L.; Karsenberg, Kim; Hummel, Marjan J.M.; Bueno-de-Mesquita, Jolien M.; Harten, van Wim H.

    2007-01-01

    Objectives: Technologies in health care are evolving quickly, with new findings in the area of biotechnological and genetic research being published regularly. A health technology assessment (HTA) is often used to answer the question of whether the new technology should be implemented into clinical

  18. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  19. New Modes of Constructive Technology Assessment for Developing Countries

    DEFF Research Database (Denmark)

    Christensen, David; Remmen, Arne

    . Technology assessment helps assess the potential positive or negative impacts following in the wake of introducing a new technology of any conceivable type. It has an overall philosophy of reducing the cost of learning in society’s handling of new technologies, anticipating impacts and feeding these insights...... in influencing technological change. In developing countries, technology assessment has received relatively little attention, but recent developments have expressed a ‘call-to-arms’ to tailor flexible approaches by ensuring the involvement of diverse stakeholders and citizens and continual learning among......An old piece of conventional wisdom warns against unsustainable ‘white elephants’ in any attempts at international transferal, adoption or development of technologies in developing countries. After more than half a century of failed attempts to introduce technologies in such settings mostly through...

  20. Assessments of emerging science and technologies: Mapping the landscape

    NARCIS (Netherlands)

    Forsberg, E.M.; Thorstensen, E.; Nielsen, R.O.; Bakker, de E.

    2014-01-01

    This paper presents comparative work from the EST-Frame project on technology appraisal. It focuses on studies of 'advisory domains' (more or less distinct traditions for assessment of technologies, such as risk analysis, foresight and ethical assessments). The purpose of the study was to increase t

  1. Principles of sustainability science to assess alternative energy technologies

    CSIR Research Space (South Africa)

    Brent, AC

    2009-04-01

    Full Text Available , adaptive capacity, and complexity of social-ecological systems to assess the potential of such technologies for increasing the carrying capacity and improving the resilience of social-ecological systems, or to assess the resilience of the technological...

  2. Application of SIG and OLAP technologies on IBGE databases as a decision support tool for the county administration

    Directory of Open Access Journals (Sweden)

    REGO, E. A.

    2008-06-01

    Full Text Available This paper shows a Decision Support System development for any brazilian county. The system is free of any costs research. For doing so, one uses the datawarehouse, OLAP and GIS technologies all together with the IBGE's database to give to the user a query building tool, showing the results in maps or/and tables format, on a very simple and efficient way.

  3. Technology assessment of PACS in Osaka University Hospital.

    Science.gov (United States)

    Inamura, K; Satoh, K; Kondoh, H; Mori, Y; Kozuka, T

    1994-05-01

    This paper describes a methodology of PACS technology assessment and gives examples of the results of measurement of 24 items of PACS-related situations of image diagnosis systems in Osaka University Hospital before a PACS is installed. These data are to be compared with the data which will be measured after PACS is installed in the new Osaka University Hospital, in order to complete our technology assessment. We propose common variables, units, and conditions of measurement, in order to establish a standard method of data comparison between before and after PACS installation in hospitals at large. We designed our PACS taking technology assessment into account. We do not stop the technology assessment at the efficacy evaluation, because PACS must be more than a tool for radiological practice. We extend the technology assessment into the effectiveness evaluation, so that PACS is a part of radiological practice itself, and diagnostic accuracy, economy and efficiency are the results of PACS operation.

  4. Improving Software Guidance for Technology Readiness Assessments (TRA)

    Science.gov (United States)

    2010-04-29

    Systems & Software Technology Conference Improving Software Guidance for Technology Readiness Assessments (TRA) 29 April 2010 Mike Nicol...APR 2010 2. REPORT TYPE 3. DATES COVERED 00-00-2010 to 00-00-2010 4. TITLE AND SUBTITLE Improving Software Guidance for Technology Readiness...Presented at the 22nd Systems and Software Technology Conference (SSTC), 26-29 April 2010, Salt Lake City, UT. 14. ABSTRACT 15. SUBJECT TERMS

  5. Assessing climate change mitigation technology interventions by international institutions

    DEFF Research Database (Denmark)

    de Coninck, Heleen; Puig, Daniel

    2015-01-01

    Accelerating the international use of climate mitigation technologies is key if effortsto curb climate change are to succeed, especially in developing countries, where weakdomestic technological innovation systems constrain the uptake of climate change mitigationtechnologies. Several...... intergovernmental agencies have set up specific programmes to supportthe diffusion of climate mitigation technologies. Using a simplified technological innovationsystem-based framework, this paper aims to systematically review these programmes, with thedual aim of assessing their collective success in promoting...

  6. Preoperative airway assessment - experience gained from a multicentre cluster randomised trial and the Danish Anaesthesia Database

    DEFF Research Database (Denmark)

    Nørskov, Anders Kehlet

    2016-01-01

    difficult intubation compared with usual care for airway assessment. This thesis is based on data from the Danish Anaesthesia Database (DAD). Paper 1 presents an observational cohort study on 188,064 patients who underwent tracheal intubation from 2008 to 2011. Data on the anaesthesiologists' preoperative...... to the DIFFICAIR trial described in Paper 4. The trial was designed to randomise anaesthesia department to either thorough education in, and subsequent use of the SARI for preoperative airway assessment or to continue usual care. Registration of the SARI in DAD was made mandatory in SARI departments and impossible...... in usual care departments. Conditions regarding anticipation of difficulties and actual airway managements were recorded as for Paper 1. DAD data made it possible to estimate an appropriate sample size, considering the between cluster variation, and to construct a stratification variable based on 2011...

  7. Assessment of technology generating institutions in biotechnology ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-05-18

    May 18, 2009 ... biotechnology innovation system of South-Eastern. Nigeria. E. N. Ajani, M. C. ... Agricultural biotechnology provides new technological tools and aims to ..... constraints include poor fringe benefit to researchers ( x. = 2.90) ...

  8. Sustainability assessment of advanced wastewater treatment technologies

    DEFF Research Database (Denmark)

    Høibye, Linda; Clauson-Kaas, Jes; Wenzel, Henrik

    2008-01-01

    with advanced oxidation. The technical assessment is based on 12 hazardous substances comprising heavy metals, organic pollutants, endocrine disruptors as well as pathogenic microorganisms. The environmental assessment is performed by life cycle assessment (LCA) comprising 9 of the specific hazardous substances...

  9. Challenges for Information Technology Supporting Educational Assessment

    Science.gov (United States)

    Webb, M.; Gibson, D.; Forkosh-Baruch, A.

    2013-01-01

    This article examines the scope for IT-enabled assessments to serve simultaneously both learners and the enterprise of education. The article proposes ways of combining frameworks that come from two different perspectives: 1) a conceptual approach to assessment design for computerized assessment based on evidence-centred design (ECD) and 2) a…

  10. Review on early technology assessments of nanotechnologies in oncology.

    Science.gov (United States)

    Retèl, Valesca P; Hummel, Marjan J M; van Harten, Wim H

    2009-12-01

    Nanotechnology is expected to play an increasingly important role in the diagnostics, prognostics, and management of targeted cancer treatments. While papers have described promising results for nanotechnology in experimental settings, the translation of fundamental research into clinical applications has yet to be widely adopted. In future, policy makers will need to anticipate new developments for clinical implementation and introduce technology assessments. Here we present an overview of the literature on the technology assessments that have already been undertaken on early stage nanotechnology in cancer care, with particular emphasis placed on clinical efficacy, efficiency, logistics, patient-related features and technology dynamics. Owing to the current stage of development of most nanotechnologies, we found only a limited number of publications describing the application of either Health Technology Assessment (HTA) or Constructive Technology Assessment (CTA). In spite of the promising conclusions of most papers concerning the benefits of clinical implementation, actual clinically relevant applications were rarely encountered, and so far only a few publications report application of systematic forms of technology assessment. Most articles consider aspects of environmental safety, regulation and ethics, often mentioning the need to investigate such issues more thoroughly. Evaluation of financial and organizational aspects is often missing. In order to obtain a realistic perspective on the translation and implementation process there is a need for a broad and systematic evaluation of nanotechnologies at early stages of development. Assessment methods taking technology dynamics into account, such as Constructive Technology Assessment (CTA) should be considered for evaluation purposes.

  11. The Contribution of Health Technology Assessment, Health Needs Assessment, and Health Impact Assessment to the Assessment and Translation of Technologies in the Field of Public Health Genomics

    DEFF Research Database (Denmark)

    Rosenkotter, N.; Vondeling, H.; Blancquaert, I.

    2011-01-01

    or to identify infrastructural needs. HIA delivers information on the impact of technologies in a wider scope and promotes informed decision making. HTA, HNA and HIA provide a partly overlapping and partly unique set of methodologies and infrastructure for the translation and assessment of genomic health...... into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [ health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could......The European Union has named genomics as one of the promising research fields for the development of new health technologies. Major concerns with regard to these fields are, on the one hand, the rather slow and limited translation of new knowledge and, on the other hand, missing insights...

  12. New Modes of Constructive Technology Assessment for Developing Countries

    DEFF Research Database (Denmark)

    Christensen, David; Remmen, Arne

    by a product or process in a developing country. On the other hand are those who design, develop and promote the technological solution. If the latter group is to follow the call for proactively taking in socio-cultural and user knowledge, what methods may be employed? This paper revisits the literature....... Technology assessment helps assess the potential positive or negative impacts following in the wake of introducing a new technology of any conceivable type. It has an overall philosophy of reducing the cost of learning in society’s handling of new technologies, anticipating impacts and feeding these insights...... universities, NGO’s, firms and users/citizens. In addressing this ‘call-to-arms’, this paper: ‐ Identifies how technology assessment principles may be brought into new decision-making arenas outside of its traditional application area of e.g. parliamentary governance systems. R evisits the technology...

  13. Ceramic Technology Project database: September 1990 summary report. [SiC, SiN, whisker-reinforced SiN, ZrO-toughened aluminas, zirconias, joints

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    Data generated within the Ceramic Technology Project (CTP) represent a valuable resource for both research and industry. The CTP database was created to provide easy access to this information in electronic and hardcopy forms by using a computerized database and by issuing periodic hardcopy reports on the database contents. This report is the sixth in a series of semiannual database summaries and covers recent additions to the database, including joined brazed specimen test data. It covers 1 SiC, 34 SiN, 10 whisker-reinforced SiN, 2 zirconia-toughened aluminas, 8 zirconias, and 34 joints.

  14. A Technology Assessment of Personal Computers. Vol. II: Personal Computer Technology, Users, and Uses.

    Science.gov (United States)

    Nilles, Jack M.

    This volume reports on the initial phase of a technology assessment of personal computers. First, technological developments that will influence the rate of diffusion of personal computer technology among the general populace are examined. Then the probable market for personal computers is estimated and analyzed on a functional basis, segregating…

  15. Innovative and Alternative Technology Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  16. LNG vehicle technology, economics, and safety assessment

    Science.gov (United States)

    Powars, Charles A.; Moyer, Carl B.; Lowell, Douglas D.

    1994-02-01

    Liquid natural gas (LNG) is an attractive transportation fuel because of its high heating value and energy density (i.e., Btu/lb. and Btu/gal.), clean burning characteristics, relatively low cost ($/Btu), and domestic availability. This research evaluated LNG vehicle and refueling system technology, economics, and safety. Prior and current LNG vehicle projects were studied to identify needed technology improvements. Life-cycle cost analyses considered various LNG vehicle and fuel supply options. Safety records, standards, and analysis methods were reviewed. The LNG market niche is centrally fueled heavy-duty fleet vehicles with high fuel consumption. For these applications, fuel cost savings can amortize equipment capital costs.

  17. Biomedical Technology Assessment The 3Q Method

    CERN Document Server

    Weinfurt, Phillip

    2010-01-01

    Evaluating biomedical technology poses a significant challenge in light of the complexity and rate of introduction in today's healthcare delivery system. Successful evaluation requires an integration of clinical medicine, science, finance, and market analysis. Little guidance, however, exists for those who must conduct comprehensive technology evaluations. The 3Q Method meets these present day needs. The 3Q Method is organized around 3 key questions dealing with 1) clinical and scientific basis, 2) financial fit and 3) strategic and expertise fit. Both healthcare providers (e.g., hospitals) an

  18. Fuel cell technology. (Latest citations from the EI compendex*plus database). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The bibliography contains citations concerning the technology and use of fuel cells. Topics include current technology, future developments, and issues affecting commercialization. Environmental benefits of fuel cell technology are discussed. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  19. 20 Years of Technology and Language Assessment in "Language Learning & Technology"

    Science.gov (United States)

    Chapelle, Carol A.; Voss, Erik

    2016-01-01

    This review article provides an analysis of the research from the last two decades on the theme of technology and second language assessment. Based on an examination of the assessment scholarship published in "Language Learning & Technology" since its launch in 1997, we analyzed the review articles, research articles, book reviews,…

  20. 20 Years of Technology and Language Assessment in "Language Learning & Technology"

    Science.gov (United States)

    Chapelle, Carol A.; Voss, Erik

    2016-01-01

    This review article provides an analysis of the research from the last two decades on the theme of technology and second language assessment. Based on an examination of the assessment scholarship published in "Language Learning & Technology" since its launch in 1997, we analyzed the review articles, research articles, book reviews,…

  1. Superconducting Technology Assessment (NSA, Office of Corporate Assessments)

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The government, and particularly NSA, has a continuing need for ever-increasing computational power. The Agency is concerned about projected limitations of...

  2. Clearinghouse-type system and database for post‑seismic buildings assessment

    Directory of Open Access Journals (Sweden)

    Claudiu-Sorin DRAGOMIR

    2015-07-01

    Full Text Available The paper presents the outline and function of a system for field assessment and the structure of a database for post-earthquake inspections, to be used with the Romanian Methodology for rapid buildings assessment, indicative ME003/2007, and for other research purposes. Functioning mode of the system for assessment in emergencies caused by earthquakes and the structure of the data collected by the field teams that participated in post-earthquake inspection are presented in this paper. A system for interdisciplinary assessment was taken into account for strong Vrancea intermediate earthquakes, but it will be useful also for crustal earthquakes of local or regional extent. The proposed system envisages a coordination centre and a clearinghouse at Bucharest, in NIRD “URBAN-INCERC” that coordinates branches of the territory (Iaşi, Timişoara and Cluj Napoca. Given the large area affected by Vrancea earthquakes, the system will pursue the establishment of regional centers also in the cities of Braşov and Constanţa, where there are universities in the field. To demonstrate the relevance of the system, the paper presents a case study of two buildings located in Bucharest downtown. By exploiting a software application created at INCERC Bucharest Branch, numerical values and charts can be obtained for all buildings investigated by the INCERC inspectors.

  3. Technology assessments in transportation: survey of recent literature

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  4. Fostering and Assessing Creativity in Technology Education

    Science.gov (United States)

    Buelin-Biesecker, Jennifer Katherine

    2012-01-01

    This study compared the creative outcomes in student work resulting from two pedagogical approaches to creative problem solving activities. A secondary goal was to validate the Consensual Assessment Technique (CAT) as a means of assessing creativity. Linear models for problem solving and design processes serve as the current paradigm in classroom…

  5. Distributed multimedia database technologies supported by MPEG-7 and MPEG-21

    CERN Document Server

    Kosch, Harald

    2003-01-01

    15 Introduction Multimedia Content: Context Multimedia Systems and Databases (Multi)Media Data and Multimedia Metadata Purpose and Organization of the Book MPEG-7: The Multimedia Content Description Standard Introduction MPEG-7 and Multimedia Database Systems Principles for Creating MPEG-7 Documents MPEG-7 Description Definition Language Step-by-Step Approach for Creating an MPEG-7 Document Extending the Description Schema of MPEG-7 Encoding and Decoding of MPEG-7 Documents for Delivery-Binary Format for MPEG-7 Audio Part of MPEG-7 MPEG-7 Supporting Tools and Referen

  6. Assessment of Technology for Information Services Planning

    Science.gov (United States)

    1979-08-01

    organi- zation, and external services (external timesharing and turnkey computer systems). Areas of impact are specific to the organization. The...timesharing vendors, changing services turnkey systems - potential and problems impacts and trends o distributed data processing technology needed...includes credit cards, automobile loans, personal and real estate loans, and leasing . Service improvements would aim at expediting credit review, payment

  7. Using technology in assessing integrated science and mathematics learning

    Science.gov (United States)

    Berlin, Donna F.; White, Arthur L.

    1995-03-01

    Drawing from current models, research, and science and mathematics education reform documents, this article first defines and/or delimits three broad domains of education: integrated school science and mathematics, assessment, and technology. Based upon this three-tiered discussion, a list of characteristics is then distilled to guide in the development of assessment for integrated school science and mathematics using technology. Two integrated school science and mathematics activities are provided to illustrate the alignment of instruction and assessment and the systematic integration of technology into both.

  8. The New Zealand Food Composition Database: A useful tool for assessing New Zealanders' nutrient intake.

    Science.gov (United States)

    Sivakumaran, Subathira; Huffman, Lee; Sivakumaran, Sivalingam

    2018-01-01

    A country-specific food composition databases is useful for assessing nutrient intake reliably in national nutrition surveys, research studies and clinical practice. The New Zealand Food Composition Database (NZFCDB) programme seeks to maintain relevant and up-to-date food records that reflect the composition of foods commonly consumed in New Zealand following Food Agricultural Organisation of the United Nations/International Network of Food Data Systems (FAO/INFOODS) guidelines. Food composition data (FCD) of up to 87 core components for approximately 600 foods have been added to NZFCDB since 2010. These foods include those identified as providing key nutrients in a 2008/09 New Zealand Adult Nutrition Survey. Nutrient data obtained by analysis of composite samples or are calculated from analytical data. Currently >2500 foods in 22 food groups are freely available in various NZFCDB output products on the website: www.foodcomposition.co.nz. NZFCDB is the main source of FCD for estimating nutrient intake in New Zealand nutrition surveys. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Modernizing the MagIC Paleomagnetic and Rock Magnetic Database Technology Stack to Encourage Code Reuse and Reproducible Science

    Science.gov (United States)

    Minnett, R.; Koppers, A. A. P.; Jarboe, N.; Jonestrask, L.; Tauxe, L.; Constable, C.

    2016-12-01

    The Magnetics Information Consortium (https://earthref.org/MagIC/) develops and maintains a database and web application for supporting the paleo-, geo-, and rock magnetic scientific community. Historically, this objective has been met with an Oracle database and a Perl web application at the San Diego Supercomputer Center (SDSC). The Oracle Enterprise Cluster at SDSC, however, was decommissioned in July of 2016 and the cost for MagIC to continue using Oracle became prohibitive. This provided MagIC with a unique opportunity to reexamine the entire technology stack and data model. MagIC has developed an open-source web application using the Meteor (http://meteor.com) framework and a MongoDB database. The simplicity of the open-source full-stack framework that Meteor provides has improved MagIC's development pace and the increased flexibility of the data schema in MongoDB encouraged the reorganization of the MagIC Data Model. As a result of incorporating actively developed open-source projects into the technology stack, MagIC has benefited from their vibrant software development communities. This has translated into a more modern web application that has significantly improved the user experience for the paleo-, geo-, and rock magnetic scientific community.

  10. Systems Engineering Technology Readiness Assessment of Hybrid-Electric Technologies for Tactical Wheeled Vehicles

    Science.gov (United States)

    2014-09-01

    Department of Energy. 2007. Energy Efficiency and Renewable Energy. “Freedom CAR and vehicle technology program; Plug-In hybrid- electric vehicle R&D Plan...ENGINEERING TECHNOLOGY READINESS ASSESSMENT OF HYBRID- ELECTRIC TECHNOLOGIES FOR TACTICAL WHEELED VEHICLES by Eddie E. McCown September 2014 Thesis...HYBRID- ELECTRIC TECHNOLOGIES FOR TACTICAL WHEELED VEHICLES 5. FUNDING NUMBERS 6. AUTHOR(S) Eddie E. McCown 7. PERFORMING ORGANIZATION NAME(S) AND

  11. The conceptual and practical challenges to technology categorisation in the preparation of technology needs assessments

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Hansen, Ulrich Elmer

    2015-01-01

    The strong focus in climate negotiations on the transfer and diffusion of technologies as ameans to mitigate and adapt to climate change has entailed various programs to promote the transfer and diffusion of climate technologies, including the Technology Needs Assessment project (TNA). Despite...... a framework for categorizing technologies according to the types of markets and non-markets in which they are diffused. While the framework has contributed to a higher degree of ‘market literacy’ among national stakeholders, four challenges in categorizing technologies have been identified: i) technologies...

  12. Assessment of cloud cover in climate models and reanalysis databases with ISCCP over the Mediterranean region

    Science.gov (United States)

    Enriquez, Aaron; Calbo, Josep; Gonzalez, Josep-Abel

    2013-04-01

    Clouds are an important regulator of climate due to their influence on the water balance of the atmosphere and their interaction with solar and infrared radiation. At any time, clouds cover a great percentage of the Earth's surface but their distribution is very irregular along time and space, which makes the evaluation of their influence on climate a difficult task. At present there are few studies related to cloud cover comparing current climate models with observational data. In this study, the database of monthly cloud cover provided by the International Satellite Cloud Climatology Project (ISCCP) has been chosen as a reference against which we compare the output of CMIP5 climate models and reanalysis databases, on the domain South-Europe-Mediterranean (SEM) established by the Intergovernmental Panel on Climate Change (IPCC) [1]. The study covers the period between 1984 and 2009, and the performance of cloud cover estimations for seasons has also been studied. To quantify the agreement between the databases we use two types of statistics: bias and SkillScore, which is based on the probability density functions (PDFs) of the databases [2]. We also use Taylor diagrams to visualize the statistics. Results indicate that there are areas where the models accurately describe what it is observed by ISCCP, for some periods of the year (e.g. Northern Africa, for autumn), compared to other areas and periods for which the agreement is lower (Iberian Peninsula in winter and the Black Sea for the summer months). However these differences should be attributed not only to the limitations of climate models, but possibly also to the data provided by ISCCP. References [1] Intergovernmental Panel on Climate Change (2007) Fourth Assessment Report: Climate Change 2007: Working Group I Report: The Physical Science Basis. [2] Ranking the AR4 climate models over the Murray Darling Basin using simulated maximum temperature, minimum temperature and precipitation. Int J Climatol 28

  13. Demand Response Advanced Controls Framework and Assessment of Enabling Technology Costs

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Jennifer; Cappers, Peter

    2017-08-28

    The Demand Response Advanced Controls Framework and Assessment of Enabling Technology Costs research describe a variety of DR opportunities and the various bulk power system services they can provide. The bulk power system services are mapped to a generalized taxonomy of DR “service types”, which allows us to discuss DR opportunities and bulk power system services in fewer yet broader categories that share similar technological requirements which mainly drive DR enablement costs. The research presents a framework for the costs to automate DR and provides descriptions of the various elements that drive enablement costs. The report introduces the various DR enabling technologies and end-uses, identifies the various services that each can provide to the grid and provides the cost assessment for each enabling technology. In addition to a report, this research includes a Demand Response Advanced Controls Database and User Manual. They are intended to provide users with the data that underlies this research and instructions for how to use that database more effectively and efficiently.

  14. History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

    Science.gov (United States)

    Banta, David; Jonsson, Egon; Childs, Paul

    2009-07-01

    The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

  15. Assessment of database for interaction of tritium with ITER plasma facing materials

    Energy Technology Data Exchange (ETDEWEB)

    Dolan, T.J.; Anderl, R.A.

    1994-09-01

    The present work surveys recent literature on hydrogen isotope interactions with Be, SS and Inconels, Cu, C, and V, and alloys of Cu and V. The goals are (1) to provide input to the International Thermonuclear Experimental Reactor (ITER) team to help with tritium source term estimates for the Early Safety and Environmental Characterization Study and (2) to provide guidance for planning additional research that will be needed to fill gaps in the present materials database. Properties of diffusivity, solubility, permeability, chemical reactions, Soret effect, recombination coefficient, surface effects, trapping, porosity, layered structures, interfaces, and oxides are considered. Various materials data are tabulated, and a matrix display shows an assessment of the quality of the data available for each main property of each material. Recommendations are made for interim values of diffusivity and solubility to be used, pending further discussion by the ITER community.

  16. JNC thermodynamic database for performance assessment of high-level radioactive waste disposal system

    Energy Technology Data Exchange (ETDEWEB)

    Yui, Mikazu; Azuma, Jiro; Shibata, Masahiro [Japan Nuclear Cycle Development Inst., Tokai Works, Waste Isolation Research Division, Tokai, Ibaraki (Japan)

    1999-11-01

    This report is a summary of status, frozen datasets, and future tasks of the JNC (Japan Nuclear Cycle Development Institute) thermodynamic database (JNC-TDB) for assessing performance of high-level radioactive waste in geological environments. The JNC-TDB development was carried out after the first progress report on geological disposal research in Japan (H-3). In the development, thermodynamic data (equilibrium constants at 25degC, I=0) for important radioactive elements were selected/determined based on original experimental data using different models (e.g., SIT, Pitzer). As a result, the reliability and traceability of the data for most of the important elements were improved over those of the PNC-TDB used in H-3 report. For detailed information of data analysis and selections for each element, see the JNC technical reports listed in this document. (author)

  17. IMPROVING HOSPITAL LOGISTICS BY RETHINKING TECHNOLOGY ASSESSMENT

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Jørgensen, Pelle Morten Thomas

    2011-01-01

    In order to cope with the future challenges of the health care sector, there is an urging need for improving efficiency at hospitals. The study presents a framework enabling health care managers of improving the in-house logistics. The distinctiveness of the framework is the way in which it relates...... technology, logistics, structure and procedures to efficiency. Changing one factor e.g. technology, initiates an iterative loop focusing on change in the related factors in order to obtain the optimal efficiency. The search for an optimal efficient solution is the driving force of the framework...... at a Danish hospital. The framework is tested on the blood sample logistics between the emergency department and laboratory with the goal of enhancing the efficiency of the emergency department....

  18. Use of dual-energy X-ray absorptiometry (DXA) for diagnosis and fracture risk assessment; WHO-criteria, T- and Z-score, and reference databases.

    Science.gov (United States)

    Dimai, Hans P

    2017-11-01

    Dual-energy X-ray absorptiometry (DXA) is a two-dimensional imaging technology developed to assess bone mineral density (BMD) of the entire human skeleton and also specifically of skeletal sites known to be most vulnerable to fracture. In order to simplify interpretation of BMD measurement results and allow comparability among different DXA-devices, the T-score concept was introduced. This concept involves an individual's BMD which is then compared with the mean value of a young healthy reference population, with the difference expressed as a standard deviation (SD). Since the early nineties of the past century, the diagnostic categories "normal, osteopenia, and osteoporosis", as recommended by a WHO working Group, are based on this concept. Thus, DXA is still the globally accepted "gold-standard" method for the noninvasive diagnosis of osteoporosis. Another score obtained from DXA measurement, termed Z-score, describes the number of SDs by which the BMD in an individual differs from the mean value expected for age and sex. Although not intended for diagnosis of osteoporosis in adults, it nevertheless provides information about an individual's fracture risk compared to peers. DXA measurement can either be used as a "stand-alone" means in the assessment of an individual's fracture risk, or incorporated into one of the available fracture risk assessment tools such as FRAX® or Garvan, thus improving the predictive power of such tools. The issue which reference databases should be used by DXA-device manufacturers for T-score reference standards has been recently addressed by an expert group, who recommended use National Health and Nutrition Examination Survey III (NHANES III) databases for the hip reference standard but own databases for the lumbar spine. Furthermore, in men it is recommended use female reference databases for calculation of the T-score and use male reference databases for calculation of Z-score. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. 数据库加密技术的研究与应用%Research and Application of Database Encryption Technology

    Institute of Scientific and Technical Information of China (English)

    韩利凯

    2011-01-01

    数据库加密技术是实现数据库信息安全的一种有效方法.从数据库系统的安全需求着手,对数据库加密的基本要求、数据库加密技术中的关键问题等进行了研究和探讨,提出了数据库加密技术在B/S学籍管理系统中的实现方案.%Database encryption technology is an effective method for realizing database information security.This article studies and discusses the basic requirements of database encryption and the key problems in database encryption technology.It also puts forward a scheme of applying database encryption technology in B/S registration management system.

  20. Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

    Science.gov (United States)

    Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

    2015-04-01

    Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

  1. Construction and assessment of individualized proteogenomic databases for large-scale analysis of nonsynonymous single nucleotide variants.

    Science.gov (United States)

    Krug, Karsten; Popic, Sasa; Carpy, Alejandro; Taumer, Christoph; Macek, Boris

    2014-12-01

    Next-generation sequencing projects focusing on genomes and transcriptomes identify millions of single nucleotide variants (SNVs), many of which result in single amino acid substitutions. These nonsynonymous (ns) SNVs are typically not incorporated into protein sequence databases used to identify MS/MS data. Here, we perform a comparative analysis of the assembly of nsSNV-containing proteogenomic databases. We use a comprehensive transcriptome and proteome dataset of HeLa cells from the literature to derive and to incorporate SNVs into databases applicable to proteomics search engines, and to assess their performance in the identification of nsSNVs. We assemble the databases by (1) translation of SNV-containing transcripts into all possible reading frames, (2) translation of predicted reading frame, (3) prediction of nsSNVs and subsequent incorporation into canonical protein sequences. We show substantial differences between generated databases in terms of represented nsSNVs and theoretical search space, affecting sensitivity and specificity of database search. We query the databases with >2.2M high-resolution MS/MS spectra using MaxQuant software and identify 451 variant peptides, containing 401 nsSNVs. We conclude that prediction of reading frame and, if applicable, SNV effect result in comprehensive yet compact databases necessary to retain sensitivity in large-scale analysis of nsSNVs called from transcriptomics data. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Illustrating anticipatory life cycle assessment for emerging photovoltaic technologies.

    Science.gov (United States)

    Wender, Ben A; Foley, Rider W; Prado-Lopez, Valentina; Ravikumar, Dwarakanath; Eisenberg, Daniel A; Hottle, Troy A; Sadowski, Jathan; Flanagan, William P; Fisher, Angela; Laurin, Lise; Bates, Matthew E; Linkov, Igor; Seager, Thomas P; Fraser, Matthew P; Guston, David H

    2014-09-16

    Current research policy and strategy documents recommend applying life cycle assessment (LCA) early in research and development (R&D) to guide emerging technologies toward decreased environmental burden. However, existing LCA practices are ill-suited to support these recommendations. Barriers related to data availability, rapid technology change, and isolation of environmental from technical research inhibit application of LCA to developing technologies. Overcoming these challenges requires methodological advances that help identify environmental opportunities prior to large R&D investments. Such an anticipatory approach to LCA requires synthesis of social, environmental, and technical knowledge beyond the capabilities of current practices. This paper introduces a novel framework for anticipatory LCA that incorporates technology forecasting, risk research, social engagement, and comparative impact assessment, then applies this framework to photovoltaic (PV) technologies. These examples illustrate the potential for anticipatory LCA to prioritize research questions and help guide environmentally responsible innovation of emerging technologies.

  3. Coal liquefaction technology. (Latest citations from the NTIS Bibliographic database). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The bibliography contains citations concerning the technologies and processes for converting coal to liquid chemicals and fuels. Topics include materials characterization of liquefaction processes, catalysis, pyrolysis, depolymerization, coprocessing, and integrated liquefaction. Also discussed are liquid fuel use in automobiles and power generation, low-temperature carbonization technology, multi-stage liquefaction, cost benefit analysis, and commercialization of liquefaction technology. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  4. Quadrennial Technology Review 2015: Technology Assessments--Wind Power

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2015-10-07

    Wind power has become a mainstream power source in the U.S. electricity portfolio, supplying 4.9% of the nation’s electricity demand in 2014. With more than 65 GW installed across 39 states at the end of 2014, utility-scale wind power is a cost-effective source of low-emissions power generation throughout much of the nation. The United States has significant sustainable land-based and offshore wind resource potential, greater than 10 times current total U.S. electricity consumption. A technical wind resource assessment conducted by the Department of Energy (DOE) in 2009 estimated that the land-based wind energy potential for the contiguous United States is equivalent to 10,500 GW capacity at 80 meters (m) hub and 12,000 GW capacity at 100 meters (m) hub heights, assuming a capacity factor of at least 30%. A subsequent 2010 DOE report estimated the technical offshore wind energy potential to be 4,150 GW. The estimate was calculated from the total offshore area within 50 nautical miles of shore in areas where average annual wind speeds are at least 7 m per second at a hub height of 90 m.

  5. Generating technology assessment. Phase I work plan, Task 1 report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-15

    A plan of work outlining information to assess electric generating technologies is presented. Projections are made of realistic and understandable engineering and cost assessments of nonnuclear electrical generating technologies. A computer-based method of producing such engineering and cost estimates for use by EIA's Coal and Electric Power Analysis Division is to be developed and implemented. Technologies and processes to be assessed are: all nonnuclear conventional and nonconventional (coal gasification, advanced combustion turbines, atmospheric fluidized bed combustion, fuel cells, geothermal, solar thermal and photovoltaics, biomass conversion to electricity, ocean thermal, wind, and MHD). Engineering specifications recommended for determination are listed. Compatibility of the technologies are to be assessed with EIA models: MEFS, LEAP, and NCM.

  6. Mining disease risk patterns from nationwide clinical databases for the assessment of early rheumatoid arthritis risk.

    Science.gov (United States)

    Chin, Chu Yu; Weng, Meng Yu; Lin, Tzu Chieh; Cheng, Shyr Yuan; Yang, Yea Huei Kao; Tseng, Vincent S

    2015-01-01

    Rheumatoid arthritis (RA) is a chronic autoimmune rheumatic disease that can cause painful swelling in the joint lining, morning stiffness, and joint deformation/destruction. These symptoms decrease both quality of life and life expectancy. However, if RA can be diagnosed in the early stages, it can be controlled with pharmacotherapy. Although many studies have examined the possibility of early assessment and diagnosis, few have considered the relationship between significant risk factors and the early assessment of RA. In this paper, we present a novel framework for early RA assessment that utilizes data preprocessing, risk pattern mining, validation, and analysis. Under our proposed framework, two risk patterns can be discovered. Type I refers to well-known risk patterns that have been identified by existing studies, whereas Type II denotes unknown relationship risk patterns that have rarely or never been reported in the literature. These Type II patterns are very valuable in supporting novel hypotheses in clinical trials of RA, and constitute the main contribution of this work. To ensure the robustness of our experimental evaluation, we use a nationwide clinical database containing information on 1,314 RA-diagnosed patients over a 12-year follow-up period (1997-2008) and 965,279 non-RA patients. Our proposed framework is employed on this large-scale population-based dataset, and is shown to effectively discover rich RA risk patterns. These patterns may assist physicians in patient assessment, and enhance opportunities for early detection of RA. The proposed framework is broadly applicable to the mining of risk patterns for major disease assessments. This enables the identification of early risk patterns that are significantly associated with a target disease.

  7. Instruments for Assessing the Impact of Technology in Education

    Science.gov (United States)

    Christensen, Rhonda; Knezek, Gerald

    2002-01-01

    Ten years of instrument development are summarized and placed within a framework for assessing the impact of technology in education. Seven well-validated instruments spanning the areas of attitudes, beliefs, skills, competencies, and technology integration proficiencies are presented, along with data analysis examples. These instruments are…

  8. Lifecycle Assessment of Biofuel Production from Wood Pyrolysis Technology

    Science.gov (United States)

    Manyele, S. V.

    2007-01-01

    Due to a stronger dependency on biomass for energy, there is a need for improved technologies in biomass-to-energy conversion in Tanzania. This paper presents a life cycle assessment (LCA) of pyrolysis technology used for conversion of wood and wood waste to liquid biofuel. In particular, a survey of environmental impacts of the process is…

  9. Scenario drafting to anticipate future developments in technology assessment

    NARCIS (Netherlands)

    Retel, V.P.; Joore, M.A.; Rutgers, E.J.; Harten, van W.H.

    2012-01-01

    Background Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and d

  10. Technology needs assessment (TNA) resource document for South Africa

    CSIR Research Space (South Africa)

    Taviv, R

    2007-08-01

    Full Text Available TNA(Technology needs assessment) is a requirement of Article 4.5 of the UNFCCC ‘Technology Transfer’ is a broad set of processes covering the flows of know-how, experience and equipment for mitigating or adapting to climate change amongst different...

  11. Lifecycle Assessment of Biofuel Production from Wood Pyrolysis Technology

    Science.gov (United States)

    Manyele, S. V.

    2007-01-01

    Due to a stronger dependency on biomass for energy, there is a need for improved technologies in biomass-to-energy conversion in Tanzania. This paper presents a life cycle assessment (LCA) of pyrolysis technology used for conversion of wood and wood waste to liquid biofuel. In particular, a survey of environmental impacts of the process is…

  12. Teacher Learning of Technology-Enhanced Formative Assessment

    Science.gov (United States)

    Beatty, Ian D.; Feldman, Allan; Leonard, William J.; Gerace, William J.; St. Cyr, Karen; Lee, Hyunju; Harris, Robby

    2008-01-01

    "Technology-Enhanced Formative Assessment" (TEFA) is an innovative pedagogy for teaching secondary school science or mathematics with "classroom response system" technology. "Teacher Learning of TEFA" (TLT) is a five year research project studying teacher change in the context of an intensive, sustained, on-site professional development (PD)…

  13. New Technologies for Standoff Assessment of Radiological Contamination

    Energy Technology Data Exchange (ETDEWEB)

    Cherepy, N; Stevens, C; Wurtz, R; Sanner, R; Frank, M; Tillotson, T; Hrubesh, L; Dietrich, D; Dignon, J; Soufli, R

    2005-05-06

    Technologies to rapidly quantify surface activity with minimal worker contact would dramatically decrease the radiation dose a radiation worker receives in assessment and cleanup operations, while obtaining a clear image of exactly where dispersed contamination is located. LLNL efforts in the development of the Photochromic Radiation Dosimeter and the Imaging Assessment System will be described. Initial use of these technologies in decontamination and decommissioning of contaminated facilities demonstrates several significant advantages over standard techniques such as survey meters and swipes.

  14. Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk

    Science.gov (United States)

    2016-10-01

    AWARD NUMBER: W81XWH-15-1-0632 TITLE: Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk PRINCIPAL INVESTIGATOR: Brian...CONTRACT NUMBER Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk 5b. GRANT NUMBER W81XWH-15-1-0632 5c. PROGRAM ELEMENT...suicide risk and to evaluate the predictive utility of these markers over a one year period. We propose to achieve these aims by: (a) collecting

  15. Potential Technologies for Assessing Risk Associated with a Mesoscale Forecast

    Science.gov (United States)

    2015-10-01

    the actual model-forecast error—the 500-hPa root-mean-square error (RMSE) height error. Future work should also consider other forecast metrics such...ARL-TN-0708 ● OCT 2015 US Army Research Laboratory Potential Technologies for Assessing Risk Associated with a Mesoscale...OCT 2015 US Army Research Laboratory Potential Technologies for Assessing Risk Associated with a Mesoscale Forecast by Patrick A

  16. Technology assessment of geothermal energy resource development

    Energy Technology Data Exchange (ETDEWEB)

    1975-04-15

    Geothermal state-of-the-art is described including geothermal resources, technology, and institutional, legal, and environmental considerations. The way geothermal energy may evolve in the United States is described; a series of plausible scenarios and the factors and policies which control the rate of growth of the resource are presented. The potential primary and higher order impacts of geothermal energy are explored, including effects on the economy and society, cities and dwellings, environmental, and on institutions affected by it. Numerical and methodological detail is included in appendices. (MHR)

  17. Typology, technology, composition and context of Muisca metalwork (Colombia, AD 600-1800: a database

    Directory of Open Access Journals (Sweden)

    Maria Alicia Uribe Villegas

    2012-03-01

    Full Text Available This database presents a compilation of previously published and unpublished data on the chemical composition of over 200 Pre-Columbian gold and gold-alloy artefacts recovered in the archaeological region inhabited by the Muisca of Colombia (AD 600-1800, in addition to 35 analyses of geological gold from Colombia. The chemical data have been supplemented with information such as museum reference codes, dimensions, typologies and dates where available, as well as aspects of the artefacts’ manufacture documented by macroscopic observation and metallographic studies. Where possible, the database also includes information relative to the specific location where the artefacts were found and their contextual associations, for example in groups of artefacts recovered as a single offering. The data allow an overview of typological, chemical, and technical aspects of this goldworking tradition but also detailed analyses on a contextual or local basis, as well as comparisons with other regions.

  18. Gender and risk assessment in contraceptive technologies

    NARCIS (Netherlands)

    Kammen, van Jessika; Oudshoorn, Nelly

    2002-01-01

    This paper concerns a comparison of risk assessment practices of contraceptives for women and men. Our analysis shows how the evaluation of health risks of contraceptives does not simply reflect the specific effects of chemical compounds in the human body. Rather, we show how side-effects were rated

  19. Technology assessment for Spaceship Two, space tourism, and private spaceflight

    Science.gov (United States)

    Hancock, Randy

    A seven-step technology assessment was conducted to address questions regarding the significance and likely consequences associated with the introduction of Spaceship Two, space tourism, and private spaceflight. Impacts were assessed across four categories: the Role and Functions of Government, Private Industry Factors, Cultural and Societal Impacts, and the Time Frame in which these impacts were anticipated to occur. The technology assessment findings were compared to the results of expert interviews that addressed the sane four categories. The researcher noted that, while there was overwhelming agreement between the technology assessment's primary impacts and the expert interview responses, there were several differences. The technology assessment and interviewees agreed that the federal government would likely be both a regulator and user of private spaceflight. Both agreed that business partnerships would be key in pursuing private spaceflight. There was also consensus that, as market forces come to bear, ticket prices would drop and a larger market and broader passenger demographic would emerge. The technology assessment and experts agreed that an accident, especially one early in the industry's evolution, could be disastrous. Both agreed that private spaceflight can serve as a inspiration to students and be a positive influence in society, and both agreed that the start of passenger flights should take place in the 2010 - 2012 timeframe. Due to the potentially disastrous consequences of an accident, there was agreement between the technology assessment and experts on the value of flight and ground crew training, driven by insurance carriers and federal mandate. Most differences between the technology assessment's findings and the expert interview responses were due to omission, rather than direct disagreement. However, this was not the case in every instance. The most significant difference between the technology assessment and the experts involved the

  20. Problems of method of technology assessment. A methodological analysis; Methodenprobleme des Technology Assessment; Eine methodologische Analyse

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, V.

    1993-03-01

    The study undertakes to analyse the theoretical and methodological structure of Technology Assessment (TA). It is based on a survey of TA studies which provided an important condition for theoreticall sound statements on methodological aspects of TA. It was established that the main basic theoretical problems of TA are in the field of dealing with complexity. This is also apparent in the constitution of problems, the most elementary and central approach of TA. Scientifically founded constitution of problems and the corresponding construction of models call for interdisciplinary scientific work. Interdisciplinarity in the TA research process is achieved at the level of virtual networks, these networks being composed of individuals suited to teamwork. The emerging network structures have an objective-organizational and an ideational basis. The objective-organizational basis is mainly the result of team composition and the external affiliations of the team members. The ideational basis of the virtual network is represented by the team members` mode of thinking, which is individually located at a multidisciplinary level. The theoretical `skeleton` of the TA knowledge system, which is represented by process knowledge based linkage structures, can be generated and also processed in connection with the knowledge on types of problems, areas of analysis and procedures to deal with complexity. Within this process, disciplinary knowledge is a necessary but not a sufficient condition. Metatheoretical and metadisciplinary knowledge and the correspondingly processes complexity of models are the basis for the necessary methodological awareness, that allows TA to become designable as a research procedure. (orig./HP) [Deutsch] Die Studie stellt sich die Aufgabe, die theoretische und methodische Struktur des Technology Assessment (TA) zu analysieren. Sie fusst auf Erhebungen, die bei Technology-Assessment-Studien vorgenommen wurden und die wesentliche Voraussetzungen fuer

  1. Measuring and Assessing Application-Specific Technology Readiness

    Directory of Open Access Journals (Sweden)

    Antonino Ardilio

    2015-11-01

    Full Text Available Technology readiness is a crucial issue for decision-makers in technology-driven enterprises, determining whether the technology will or won’t be adopted for use in products or as a process technology. We know that, in some cases, lower technology readiness will be accepted by the users; these could be end-users, but, more often, it will be used in companies. The impact of a too early or too late adopted technology can be huge for companies and can even threaten market position or the existence of the company itself. Research institutes and technology developers, in particular application-oriented research organizations, might be also interested in which parameters or technology attributes should be improved or extended, according to the addressed application field, so that the technology fulfils the market-requested functions and a fast diffusion in the market can be achieved. Existing technology readiness models cover the various usages of the technology. In many cases, they assess the technology’s use in across different industries and application fields. However, the requirements in many fields are mostly different and very specific; thus, evaluation at such a high level can’t conclude whether the technology should be considered and adopted in the applications involved. This paper introduces an approach on how to determine and map the application-specific readiness of technology by decomposing both the application and the technology into its requested functions, as well as dynamically mapping the individual technology performance criteria. The applicability of this model will be demonstrated and discussed by a use case in the area of OLED-technology.

  2. Space-reactor electric systems: subsystem technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R.V.; Bost, D.; Determan, W.R.

    1983-03-29

    This report documents the subsystem technology assessment. For the purpose of this report, five subsystems were defined for a space reactor electric system, and the report is organized around these subsystems: reactor; shielding; primary heat transport; power conversion and processing; and heat rejection. The purpose of the assessment was to determine the current technology status and the technology potentials for different types of the five subsystems. The cost and schedule needed to develop these potentials were estimated, and sets of development-compatible subsystems were identified.

  3. Assessment of Wearable Sensor Technologies for Biosurveillance

    Science.gov (United States)

    2014-11-01

    intelligence (AI) and biometric data, the device captures electrodermal activity in real time to assess emotional states. Using the technique of...Biometric smartwear Hexoskin Breathing rate, volume, cadence, ECG, sleep position, heart rate, and other physiological data Wearable Wellnes...watches. Google Fit’s fitness tracking will display data such as heart rate, or detect whether its wearer has been physically active . Google’s

  4. Phase shifter technology assessment - Prospects and applications

    Science.gov (United States)

    Sokolov, Vladimir

    1991-01-01

    Capabilities and limitations of MMIC phase shifter technology at microwave and millimeter wave frequencies are reviewed. MMIC-based phase arrays make it possible to integrate active elements at the array face, i.e., to incorporate transmit power amplifiers and/or low noise amplifiers at each antenna element. Active elements make it possible to increase power efficiency and reliability and provide graceful degradation. Monolithic integration of the various transmit/receive functions including phase shifting is considered to be feasible through at least the lower millimeter-wave frequency range (about 30-100 GHz). MMIC integration also allows more flexibility in array design including those that are intended for airborne conformal applications.

  5. Extraction and use of historical extreme climate databases for nuclear power plants safety assessment

    Science.gov (United States)

    Hamdi, Yasser; Bertin, Xavier; Bardet, Lise; Duluc, Claire-Marie; Rebour, Vincent

    2015-04-01

    Safety assessments of nuclear power plants (NPPs) related to natural hazards are a matter of major interest to the nuclear community in France and many European countries. Over the past fewer decades, France has experienced many of these events such as heat waves (2003 and 2006), heavy snowstorms (1958, 1990 and 1992), storms which have given rise to heavy rain and severe floods (1992, 1999, 2010), strong straight-line wind and extreme marine surges (1987, 1999 and 2010) much larger than the other local observations (outliers). These outliers had clearly illustrated the potential to underestimate the extreme surges calculated with the current statistical methods. The estimation of extreme surges then requires the use of a statistical analysis approach having a more solid theoretical framework and using more reliable databases for the assessment of hazards to design NPPs to low or extremely low probabilities of failure. These databases can be produced by collecting historical information (HI) about severe climatic events occurred over short and long timescales. As a matter of fact, natural hazards such as heat waves, droughts, floods, severe storms and snowstorms have affected France and many European countries since the dawn of time. These events would have been such horrific experiences that if they really occurred, there would be unmistakable traces of them. They must have left clues. These catastrophic events have been unforgettably engraved in people's minds and many of them have been traced in archives and history textbooks. The oldest events have certainly left clues and traces somewhere in the geological layers of the earth or elsewhere. The construction of the historical databases and developing probabilistic approaches capable of integrating them correctly is highly challenging for the scientific community (Translating these geological clues to historical data to build historical databases that can be used by the statistical models is a different

  6. Market Assessment of Biomass Gasification and Combustion Technology for Small- and Medium-Scale Applications

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, D.; Haase, S.

    2009-07-01

    This report provides a market assessment of gasification and direct combustion technologies that use wood and agricultural resources to generate heat, power, or combined heat and power (CHP) for small- to medium-scale applications. It contains a brief overview of wood and agricultural resources in the U.S.; a description and discussion of gasification and combustion conversion technologies that utilize solid biomass to generate heat, power, and CHP; an assessment of the commercial status of gasification and combustion technologies; a summary of gasification and combustion system economics; a discussion of the market potential for small- to medium-scale gasification and combustion systems; and an inventory of direct combustion system suppliers and gasification technology companies. The report indicates that while direct combustion and close-coupled gasification boiler systems used to generate heat, power, or CHP are commercially available from a number of manufacturers, two-stage gasification systems are largely in development, with a number of technologies currently in demonstration. The report also cites the need for a searchable, comprehensive database of operating combustion and gasification systems that generate heat, power, or CHP built in the U.S., as well as a national assessment of the market potential for the systems.

  7. The conceptual and practical challenges to technology categorisation in the preparation of technology needs assessments

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Hansen, Ulrich Elmer

    2015-01-01

    The strong focus in climate negotiations on the transfer and diffusion of technologies as ameans to mitigate and adapt to climate change has entailed various programs to promote the transfer and diffusion of climate technologies, including the Technology Needs Assessment project (TNA). Despite...... for the challenges in formulating plans of actions for technologies. If, due to a lack of conceptual clarity, it is not clear to countries whether the diffusion of a specific technology should be implemented by a project or by means of an enabling framework, the measures proposed in the action plans may...

  8. Survey of the situation of technology succession. Databases of articles including in industrial technology museums; Gijutsu keisho jokyo chosa. Sangyo gijutsu hakubutsukan shuzohin D.B. hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To promote the succession of history of and the creative use of industrial science technologies, the paper made lists and databases of the articles of industrial technology museums and material halls in Japan. Record/preservation and collection/systematization of history of the industrial technology is useful for forming bases necessary for promotion of future research/development and international contribution. Museums and material halls are the fields for making comprehensive and practical activities. The data were made as one of the basic databases as the first step for promoting activities for examining the technical succession situation in a long term range continuously and systematically. In the classification of the data, the energy relation was divided into electric power, nuclear power, oil, coal, gas and energy in general. Others were classified into metal/mine, electricity/electronics/communication, chemistry/food, ship building/heavy machinery, printing/precision instrument, and textile/spinning. Moreover, the traffic relation was classified into railroad, automobiles/two-wheeled vehicles, airline/space, and ships. Items were also set of life relation, civil engineering/architecture, and general. The total number of the museums for the survey reached 208.

  9. Trading Time with Space - Development of subduction zone parameter database for a maximum magnitude correlation assessment

    Science.gov (United States)

    Schaefer, Andreas; Wenzel, Friedemann

    2017-04-01

    Subduction zones are generally the sources of the earthquakes with the highest magnitudes. Not only in Japan or Chile, but also in Pakistan, the Solomon Islands or for the Lesser Antilles, subduction zones pose a significant hazard for the people. To understand the behavior of subduction zones, especially to identify their capabilities to produce maximum magnitude earthquakes, various physical models have been developed leading to a large number of various datasets, e.g. from geodesy, geomagnetics, structural geology, etc. There have been various studies to utilize this data for the compilation of a subduction zone parameters database, but mostly concentrating on only the major zones. Here, we compile the largest dataset of subduction zone parameters both in parameter diversity but also in the number of considered subduction zones. In total, more than 70 individual sources have been assessed and the aforementioned parametric data have been combined with seismological data and many more sources have been compiled leading to more than 60 individual parameters. Not all parameters have been resolved for each zone, since the data completeness depends on the data availability and quality for each source. In addition, the 3D down-dip geometry of a majority of the subduction zones has been resolved using historical earthquake hypocenter data and centroid moment tensors where available and additionally compared and verified with results from previous studies. With such a database, a statistical study has been undertaken to identify not only correlations between those parameters to estimate a parametric driven way to identify potentials for maximum possible magnitudes, but also to identify similarities between the sources themselves. This identification of similarities leads to a classification system for subduction zones. Here, it could be expected if two sources share enough common characteristics, other characteristics of interest may be similar as well. This concept

  10. Development of a New Branded UK Food Composition Database for an Online Dietary Assessment Tool.

    Science.gov (United States)

    Carter, Michelle C; Hancock, Neil; Albar, Salwa A; Brown, Helen; Greenwood, Darren C; Hardie, Laura J; Frost, Gary S; Wark, Petra A; Cade, Janet E

    2016-08-05

    The current UK food composition tables are limited, containing ~3300 mostly generic food and drink items. To reflect the wide range of food products available to British consumers and to potentially improve accuracy of dietary assessment, a large UK specific electronic food composition database (FCDB) has been developed. A mapping exercise has been conducted that matched micronutrient data from generic food codes to "Back of Pack" data from branded food products using a semi-automated process. After cleaning and processing, version 1.0 of the new FCDB contains 40,274 generic and branded items with associated 120 macronutrient and micronutrient data and 5669 items with portion images. Over 50% of food and drink items were individually mapped to within 10% agreement with the generic food item for energy. Several quality checking procedures were applied after mapping including; identifying foods above and below the expected range for a particular nutrient within that food group and cross-checking the mapping of items such as concentrated and raw/dried products. The new electronic FCDB has substantially increased the size of the current, publically available, UK food tables. The FCDB has been incorporated into myfood24, a new fully automated online dietary assessment tool and, a smartphone application for weight loss.

  11. Development of a New Branded UK Food Composition Database for an Online Dietary Assessment Tool

    Science.gov (United States)

    Carter, Michelle C.; Hancock, Neil; Albar, Salwa A.; Brown, Helen; Greenwood, Darren C.; Hardie, Laura J.; Frost, Gary S.; Wark, Petra A.; Cade, Janet E.

    2016-01-01

    The current UK food composition tables are limited, containing ~3300 mostly generic food and drink items. To reflect the wide range of food products available to British consumers and to potentially improve accuracy of dietary assessment, a large UK specific electronic food composition database (FCDB) has been developed. A mapping exercise has been conducted that matched micronutrient data from generic food codes to “Back of Pack” data from branded food products using a semi-automated process. After cleaning and processing, version 1.0 of the new FCDB contains 40,274 generic and branded items with associated 120 macronutrient and micronutrient data and 5669 items with portion images. Over 50% of food and drink items were individually mapped to within 10% agreement with the generic food item for energy. Several quality checking procedures were applied after mapping including; identifying foods above and below the expected range for a particular nutrient within that food group and cross-checking the mapping of items such as concentrated and raw/dried products. The new electronic FCDB has substantially increased the size of the current, publically available, UK food tables. The FCDB has been incorporated into myfood24, a new fully automated online dietary assessment tool and, a smartphone application for weight loss. PMID:27527214

  12. Noninvasive imaging technologies for cutaneous wound assessment: A review.

    Science.gov (United States)

    Paul, Dereck W; Ghassemi, Pejhman; Ramella-Roman, Jessica C; Prindeze, Nicholas J; Moffatt, Lauren T; Alkhalil, Abdulnaser; Shupp, Jeffrey W

    2015-01-01

    The ability to phenotype wounds for the purposes of assessing severity, healing potential and treatment is an important function of evidence-based medicine. A variety of optical technologies are currently in development for noninvasive wound assessment. To varying extents, these optical technologies have the potential to supplement traditional clinical wound evaluation and research, by providing detailed information regarding skin components imperceptible to visual inspection. These assessments are achieved through quantitative optical analysis of tissue characteristics including blood flow, collagen remodeling, hemoglobin content, inflammation, temperature, vascular structure, and water content. Technologies that have, to this date, been applied to wound assessment include: near infrared imaging, thermal imaging, optical coherence tomography, orthogonal polarization spectral imaging, fluorescence imaging, laser Doppler imaging, microscopy, spatial frequency domain imaging, photoacoustic detection, and spectral/hyperspectral imaging. We present a review of the technologies in use or development for these purposes with three aims: (1) providing basic explanations of imaging technology concepts, (2) reviewing the wound imaging literature, and (3) providing insight into areas for further application and exploration. Noninvasive imaging is a promising advancement in wound assessment and all technologies require further validation.

  13. Elaboration and validation of an assistive technology assessment questionnaire

    Directory of Open Access Journals (Sweden)

    Fernanda Jorge Guimarães

    2015-06-01

    Full Text Available Assistive Technologies consists of resources, methods, and strategies favoring autonomy and inclusion of elderly and people with disabilities, being scarce in the literature instruments assessing them. A methodology study conducted with a panel of specialists and people with visual impairment, aimed to elaborate and validate a questionnaire to assess educational assistive technology. To consider an item as valid, we used 80% as agreement percentage, and validity and reliability of the questionnaire were calculated. Assistive Technology was characterized in six attributes: objectives, access, clarity, structure and presentation, relevance and efficacy, interactivity, and 19 items were elaborated to compose the questionnaire. From those, 11 obtained percentages higher than 80%, seven were modified and one was excluded. The instrument Cronbach’s alpha was 0,822, guaranteeing validity and reliability of the tool to assess health education Assistive Technology, and therefore, its use is indicated.

  14. Development of prostate cancer research database with the clinical data warehouse technology for direct linkage with electronic medical record system.

    Science.gov (United States)

    Choi, In Young; Park, Seungho; Park, Bumjoon; Chung, Byung Ha; Kim, Choung-Soo; Lee, Hyun Moo; Byun, Seok-Soo; Lee, Ji Youl

    2013-01-01

    In spite of increased prostate cancer patients, little is known about the impact of treatments for prostate cancer patients and outcome of different treatments based on nationwide data. In order to obtain more comprehensive information for Korean prostate cancer patients, many professionals urged to have national system to monitor the quality of prostate cancer care. To gain its objective, the prostate cancer database system was planned and cautiously accommodated different views from various professions. This prostate cancer research database system incorporates information about a prostate cancer research including demographics, medical history, operation information, laboratory, and quality of life surveys. And, this system includes three different ways of clinical data collection to produce a comprehensive data base; direct data extraction from electronic medical record (EMR) system, manual data entry after linking EMR documents like magnetic resonance imaging findings and paper-based data collection for survey from patients. We implemented clinical data warehouse technology to test direct EMR link method with St. Mary's Hospital system. Using this method, total number of eligible patients were 2,300 from 1997 until 2012. Among them, 538 patients conducted surgery and others have different treatments. Our database system could provide the infrastructure for collecting error free data to support various retrospective and prospective studies.

  15. Technology Enhanced Formative Assessment for 21st Century Learning

    Science.gov (United States)

    Spector, J. Michael; Ifenthaler, Dirk; Sampson, Demetrios; Yang, Lan; Mukama, Evode; Warusavitarana, Amali; Dona, Kulari Lokuge; Eichhorn, Koos; Fluck, Andrew; Huang, Ronghuai; Bridges, Susan; Lu, Jiingyan; Ren, Youqun; Gui, Xiaoqing; Deneen, Christopher C.; San Diego, Jonathan; Gibson, David C.

    2016-01-01

    This paper is based on the deliberations of the Assessment Working Group at EDUsummIT 2015 in Bangkok, Thailand. All of the members of Thematic Working Group 5 (TWG5) have contributed to this synthesis of potentials, concerns and issues with regard to the role of technology in assessment as, for and of learning in the 21st century. The group…

  16. Utilisation of medical technology assessment in health policy

    NARCIS (Netherlands)

    van den Heuvel, WJA; Wieringh, R; van den Heuvel, LPM

    1997-01-01

    Objective: To assess the contribution of medical technology assessment (MTA) to health policy decision making, the question has to be answered whether MTA is actually being used in decision-making processes and what factors are related to its utilisation. Design: We investigated recent Dutch policy

  17. Voice Assessment of Student Work: Recent Studies and Emerging Technologies

    Science.gov (United States)

    Eckhouse, Barry; Carroll, Rebecca

    2013-01-01

    Although relatively little attention has been given to the voice assessment of student work, at least when compared with more traditional forms of text-based review, the attention it has received strongly points to a promising form of review that has been hampered by the limits of an emerging technology. A fresh review of voice assessment in light…

  18. A Technology Assessment of Personal Computers. Vol. I: Summary.

    Science.gov (United States)

    Nilles, Jack M.

    This volume summarizes the results of a 2-year technology assessment of personal computers. The purpose of this study was to explore possible future modes of growth of the personal computer and related industries, to assess the impacts and consequences of that growth, and to present some of the policy issues and options which may arise as a…

  19. Reactor technology assessment and selection utilizing systems engineering approach

    Science.gov (United States)

    Zolkaffly, Muhammed Zulfakar; Han, Ki-In

    2014-02-01

    The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

  20. The Energy Science and Technology Database on a local library system: A case study at the Los Alamos National Research Library

    Energy Technology Data Exchange (ETDEWEB)

    Holtkamp, I.S.

    1994-10-01

    This paper presents an overview of efforts at Los Alamos National Laboratory to acquire and mount the Energy Science and Technology Database (EDB) as a citation database on the Research Library`s Geac Advance system. The rationale for undertaking this project and expected benefits are explained. Significant issues explored are loading non-USMARC records into a MARC-based library system, the use of EDB records to replace or supplement in-house cataloging of technical reports, the impact of different cataloging standards and database size on searching and retrieval, and how integrating an external database into the library`s online catalog may affect staffing and workflow.

  1. Performance assessment of EMR systems based on post-relational database.

    Science.gov (United States)

    Yu, Hai-Yan; Li, Jing-Song; Zhang, Xiao-Guang; Tian, Yu; Suzuki, Muneou; Araki, Kenji

    2012-08-01

    Post-relational databases provide high performance and are currently widely used in American hospitals. As few hospital information systems (HIS) in either China or Japan are based on post-relational databases, here we introduce a new-generation electronic medical records (EMR) system called Hygeia, which was developed with the post-relational database Caché and the latest platform Ensemble. Utilizing the benefits of a post-relational database, Hygeia is equipped with an "integration" feature that allows all the system users to access data-with a fast response time-anywhere and at anytime. Performance tests of databases in EMR systems were implemented in both China and Japan. First, a comparison test was conducted between a post-relational database, Caché, and a relational database, Oracle, embedded in the EMR systems of a medium-sized first-class hospital in China. Second, a user terminal test was done on the EMR system Izanami, which is based on the identical database Caché and operates efficiently at the Miyazaki University Hospital in Japan. The results proved that the post-relational database Caché works faster than the relational database Oracle and showed perfect performance in the real-time EMR system.

  2. Application of Optical Disc Databases and Related Technology to Public Access Settings

    Science.gov (United States)

    1992-03-01

    Librarian 5, no 6: 23. Nelson, Nancy Melin. 1991. CD-ROM growth: unleashing the potential. Library Journal 116, no. 2: 51-53. Nicholls, Paul Travis...1991. The impact of CD-ROM on online. Library Journal 116, no. 2: 61-62. Tenopir, Carol, and Ralph Neufang. 1991. CD-ROM, online and databases on...primer. PC Magazine, 17 December, 44. Zink, Steven D. 1990. Planning for the perils of CD-ROM. Library Journal 115, no. 2: 51-55. 211 INITIAL

  3. Emerging frontier technologies for food safety analysis and risk assessment

    Institute of Scientific and Technical Information of China (English)

    DONG Yi-yang; LIU Jia-hui; WANG Sai; CHEN Qi-long; GUO Tian-yang; ZHANG Li-ya; JIN Yong; SU Hai-jia; TAN Tian-wei

    2015-01-01

    Access to security and safe food is a basic human necessity and essential for a sustainable world. To perform hi-end food safety analysis and risk assessment with state of the art technologies is of utmost importance thereof. With applications as exempliifed by microlfuidic immunoassay, aptasensor, direct analysis in real time, high resolution mass spectrometry, benchmark dose and chemical speciifc adjustment factor, this review presents frontier food safety analysis and risk assess-ment technologies, from which both food quality and public health wil beneift undoubtedly in a foreseeable future.

  4. The principles of Health Technology Assessment in laboratory medicine.

    Science.gov (United States)

    Liguori, Giorgio; Belfiore, Patrizia; D'Amora, Maurizio; Liguori, Renato; Plebani, Mario

    2017-01-01

    The Health Technology Assessment (HTA) is a multi-professional and multidisciplinary evaluation approach designed to assess health technology in the broadest sense of the term, from its instruments to the rearranging of its organizational structures. It is by now an established methodology at national and international levels that involves several medical disciplines thanks to its versatility. Laboratory medicine is one of these disciplines. Such specialization was subjected, in recent years, to deep changes even from an organizational standpoint, in order to meet the health needs of the population, making them as effective and cost-effective as possible. In this regard, HTA was the tool used to assess implications in different areas.

  5. Establishment of database and network for research of stream generator and state of the art technology review

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun [Sungkyunkwan Univ., Seoul (Korea, Republic of)

    2004-02-15

    A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology.

  6. Design and implementation of a web-based, database-driven histology atlas: technology at work.

    Science.gov (United States)

    Patel, Sanjay G; Rosenbaum, Benjamin P; Chark, Davin W; Lambert, H Wayne

    2006-09-01

    At Vanderbilt University, the "Human Cell and Tissue Biology" course is a required lecture and laboratory course with 2 full-time instructors and 106 students. To address demands placed on faculty for individual attention, an interactive Web-based histology atlas was developed and implemented in January 2005. This atlas was specifically designed to complement the existing laboratory manual and to transform the manual into an interactive educational tool whereby students could view high-resolution images of histological specimens online. By utilizing a computer scripting language, interactive highlighting of histological structures was accomplished through the implementation of a simple mouse-rollover function. This computer-aided instruction software allows students to preview histological structures of interest prior to entering the laboratory, to have additional faculty-directed contact hours during laboratory, and to review material efficiently. The conversion of the originally developed static application into a database-driven tool streamlined the development and modification of the atlas while facilitating the creation of advanced features. Six weeks after launching this interactive atlas, Vanderbilt medical students logged 1,200 hr of use. Through the cooperative efforts of faculty and students, the interactive atlas evolved to meet the educational demands of medical students owing to the development and implementation of a database structure. The functionality and educational value of the interactive atlas in facilitating self-learning was ultimately measured by positive student feedback and use. (c) 2006 Wiley-Liss, Inc.

  7. THE DATABASE MANAGEMENT SYSTEM OF PREFERENTIAL PROVISION OF MEDICINES IN THE KRASNODAR REGION WITH THE USE OF CLOUD TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Khalafyan A. A.

    2015-05-01

    Full Text Available The dynamic development of information technologies in medicine of the Krasnodar region, associated with the introduction of modern information systems in healthcare for 2011 - 2014 years has an impact on the system of issuing and servicing preferential recipes and prescriptions for controlled drugs. The introduction of a fundamentally new system of health care based on modern standards, common to the whole territory of the Russian Federation could not be possible to implement without providing healthcare organizations the tools to monitor indicators of prescribing beneficiary drug coverage (BDC transmitted electronically to pharmacies. In supplying all the participants of the program with the necessary drugs (ND in the Krasnodar region there is an urgent problem and visualization of information of BDC activities. Improving management by improving the efficiency and reliability of the information for all levels of management in a hierarchical structure of health is directly related to the quality of social services for certain categories of citizens in accordance with the Federal Law issued on July, 17th 1999 178-FZ "On state social assistance." This paper describes a methodology for the creation of a single automated database, which can be placed in both the private secure cloud and in the public, with the possibility of access to information in the workplace using the Internet. Working with a database is implemented by means of language T-SQL. Access to the system of end-users is implemented with taking into account the information security by means of the technology called "thin client". As an application, we use the Services Reporting Services - Reporting server platform that provides opportunities for convenient work with reports of various data sources. The database is filled according to the information of the state health care budget "Medical Information and Analytical Center" of The Ministry of Health of the Krasnodar region. We have

  8. Assessment of OCT color probability codes in myopic glaucoma eyes after applying a myopic normative database.

    Science.gov (United States)

    Seol, Bo Ram; Kim, Dong Myung; Park, Ki Ho; Jeoung, Jin Wook

    2017-09-11

    To evaluate the optical coherence tomography (OCT) color probability codes based on a myopic normative database and to investigate whether the implementation of the myopic normative database can improve the OCT diagnostic ability in myopic glaucoma. Comparative validity study. In this study, 305 eyes (154 myopic healthy eyes and 151 myopic glaucoma eyes) were included. A myopic normative database was obtained based on myopic healthy eyes. We evaluated the agreement between OCT color probability codes after applying the built-in and myopic normative databases, respectively. Another 120 eyes (60 myopic healthy eyes and 60 myopic glaucoma eyes) were included and the diagnostic performance of OCT color codes using a myopic normative database was investigated. The mean Kw coefficients for quadrant RNFL thickness, clock-hour RNFL thickness, and GCIPL thickness were 0.636, 0.627, and 0.564, respectively. The myopic normative database showed a higher specificity than did the built-in normative database in quadrant RNFL thickness, clock-hour RNFL thickness, and GCIPL thickness (Pdatabase in quadrant RNFL thickness, clock-hour RNFL thickness, and GCIPL thickness (P=0.011, 0.004, database. The implementation of a myopic normative database is needed to allow more precise interpretation of OCT color probability codes when used in myopic eyes. Copyright © 2017. Published by Elsevier Inc.

  9. Modern SQL and NoSQL database technologies for the ATLAS experiment

    CERN Document Server

    Barberis, Dario; The ATLAS collaboration

    2017-01-01

    Structured data storage technologies evolve very rapidly in the IT world. LHC experiments, and ATLAS in particular, try to select and use these technologies balancing the performance for a given set of use cases with the availability, ease of use and of getting support, and stability of the product. We definitely and definitively moved from the “one fits all” (or “all has to fit into one”) paradigm to choosing the best solution for each group of data and for the applications that use these data. This talk describes the solutions in use, or under study, for the ATLAS experiment and their selection process and performance.

  10. ASSESSMENT OF ORGANIZATIONAL AND TECHNOLOGICAL RELIABILITY OF INDUSTRIAL CONSTRUCTION ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Gazaryan Robert Kamoevich

    2012-10-01

    Full Text Available In this article, the procedure of identification of organizational and technological reliability is described. This methodology is applicable both to separate functional areas and to all industrial enterprises. Its objective is to assess the expediency of reorganization. The objective of this scientific research is the substantiation of reorganization of an industrial enterprise. Multivariable models, or convolutions, were used as research methods. According to the RF law, industrial enterprises are divided into four functional areas, each of which is assessed on the basis of multiple criteria. Assessment of organizational and technological reliability requires a multi-parameter model. Its axes correspond to the number of evaluation criteria. The set of criteria designated for the assessment of organizational and technological reliability is identified on the basis of the homogeneity of trend indicators designated for centripetal and centrifugal models. The axes of a multi-parameter model represent real and benchmark values. The unit serves as the benchmark value; it is the maximal value of this parameter. The formula based on average values shall be used to determine the total value of the above parameters. The authors have also generated a model of organizational and technological reliability of industrial enterprises. It is noteworthy that assessment of organizational and technological reliability of an industrial enterprise requires a concentric multi-layer model developed through the application of the convolution method.

  11. Independent Review of Aviation Technology and Research Information Analysis System (ATRIAS) Database

    Science.gov (United States)

    1994-02-01

    previous interactions; and a blackboard that provides a common fact base for communicatin between the other components of the system. Preferably, the...301 context. This work is being accomplished under UNIX in an X-windows envirorment. IntiaL Technology Transfer: JPL to Syracuse Corporation (SRC). A

  12. Technology Assessment Tool - An Application of Systems Engineering to USDOE Technology Proposals

    Energy Technology Data Exchange (ETDEWEB)

    Rynearson, Michael Ardel

    1999-06-01

    This paper discusses the system design for a Technology Assessment (TA) tool that can be used to quantitatively evaluate new and advanced technologies, products, or processes. Key features of the tool include organization of information in an indentured hierarchy; questions and categories derived from the decomposition of technology performance; segregation of life-cycle issues into six assessment categories; and scoring, relative impact, and sensitivity analysis capability. An advantage of the tool's use is its ability to provide decision analysis data, based on incomplete or complete data.

  13. Technology Assessment Tool - An Application of Systems Engineering to USDOE Technology Proposals

    Energy Technology Data Exchange (ETDEWEB)

    Rynearson, Michael Ardel

    1999-06-01

    This paper discusses the system design for a Technology Assessment (TA) tool that can be used to quantitatively evaluate new and advanced technologies, products, or processes. Key features of the tool include organization of information in an indentured hierarchy; questions and categories derived from the decomposition of technology performance; segregation of life-cycle issues into six assessment categories; and scoring, relative impact, and sensitivity analysis capability. An advantage of the tool's use is its ability to provide decision analysis data, based on incomplete or complete data.

  14. Technology Assessment Tool - An Application of Systems Engineering to USDOE Technology Proposals

    Energy Technology Data Exchange (ETDEWEB)

    M. A. Rynearson

    1999-06-01

    This paper discusses the system design of a Technology Assessment (TA) tool that can be used to quantitatively evaluate new and advanced technologies, products, or processes. Key features of the tool include organization of information in an indentured hierarchy; questions and categories derived from the decomposition of technology performance; segregation of life-cycle issues into six assessment categories; and scoring, relative impact, and sensitivity analysis capability. An advantage of the tool's use is its ability to provide decision analysis data, based on incomplete or complete data.

  15. Assessment and application of national environmental databases and mapping tools at the local level to two community case studies.

    Science.gov (United States)

    Hammond, Davyda; Conlon, Kathryn; Barzyk, Timothy; Chahine, Teresa; Zartarian, Valerie; Schultz, Brad

    2011-03-01

    Communities are concerned over pollution levels and seek methods to systematically identify and prioritize the environmental stressors in their communities. Geographic information system (GIS) maps of environmental information can be useful tools for communities in their assessment of environmental-pollution-related risks. Databases and mapping tools that supply community-level estimates of ambient concentrations of hazardous pollutants, risk, and potential health impacts can provide relevant information for communities to understand, identify, and prioritize potential exposures and risk from multiple sources. An assessment of existing databases and mapping tools was conducted as part of this study to explore the utility of publicly available databases, and three of these databases were selected for use in a community-level GIS mapping application. Queried data from the U.S. EPA's National-Scale Air Toxics Assessment, Air Quality System, and National Emissions Inventory were mapped at the appropriate spatial and temporal resolutions for identifying risks of exposure to air pollutants in two communities. The maps combine monitored and model-simulated pollutant and health risk estimates, along with local survey results, to assist communities with the identification of potential exposure sources and pollution hot spots. Findings from this case study analysis will provide information to advance the development of new tools to assist communities with environmental risk assessments and hazard prioritization.

  16. Nutrition and health technology assessment: when two worlds meet

    OpenAIRE

    Poley, Marten J.

    2015-01-01

    There is a growing recognition that nutrition may have a positive impact on public health and that it may reduce medical expenditures. Yet, such claims need to be substantiated by evidence. This evidence could be delivered by health technology assessment (HTA), which can be thought of as the evaluation of technologies for clinical effectiveness, cost-effectiveness, and ethical, legal, and social impacts. The application of HTA to the field of “nutrition interventions” is recent. So far, HTA a...

  17. Assessing opioid shopping behaviour: a large cohort study from a medication dispensing database in the US.

    Science.gov (United States)

    Cepeda, M Soledad; Fife, Daniel; Chow, Wing; Mastrogiovanni, Gregory; Henderson, Scott C

    2012-04-01

    : Risks of abuse, misuse and diversion of opioids are of concern. Obtaining opioid prescriptions from multiple prescribers, known as opioid shopping, is a way in which opioids may be abused and diverted. Previous studies relied on counting the number of prescribers or number of pharmacies a subject goes to in a year to define shopping behaviour, but did not distinguish successive prescribers from concomitant prescribers. : The aim of the study was to assess the frequency of opioid overlapping prescriptions from different prescribers, compare it with diuretics and benzodiazepines, and provide a definition of shopping behaviour that differentiates opioids from diuretics, avoiding the inappropriate flagging of individuals with legitimate use of opioids. : Population-based cohort study using the IMS LRx database. This database covers 65% of all retail prescriptions in the US and includes mail service and specialty pharmacy provider prescriptions independent of the method of payment. : Ambulatory. : Subjects with at least one dispensing for any type of opioid in 2008. Similar cohorts were created for subjects exposed to benzodiazepines or diuretics. Analyses were performed separately for naïve subjects and those with prior use. : Frequency of overlapping prescriptions defined as at least 1 day of overlapping dispensing of prescriptions written by two or more different prescribers at any time during an 18-month period. : A total of 25 161 024 subjects exposed to opioids were included, of whom 13.1% exhibited at least one episode of overlapping prescriptions during 18 months of follow-up. Almost 10% of subjects exposed to benzodiazepines and 13.8% of subjects exposed to diuretics exhibited a similar behaviour. Having overlapping prescriptions dispensed by three or more pharmacies differentiates opioids from the other medication classes. Using that criterion, the overall risk of shopping behaviour was 0.18% in subjects exposed to opioids, 0.10% in subjects exposed to

  18. [Assessment of an algorithm to identify paediatric-onset celiac disease cases through administrative healthcare databases].

    Science.gov (United States)

    Pitter, Gisella; Gnavi, Roberto; Romor, Pierantonio; Zanotti, Renzo; Simonato, Lorenzo; Canova, Cristina

    2017-01-01

    to assess the role of four administrative healthcare databases (pathology reports, copayment exemptions, hospital discharge records, gluten-free food prescriptions) for the identification of possible paediatric cases of celiac disease. population-based observational study with record linkage of administrative healthcare databases. SETTING AND PARTICIPANT S: children born alive in the Friuli Venezia Giulia Region (Northern Italy) to resident mothers in the years 1989-2012, identified using the regional Medical Birth Register. we defined possible celiac disease as having at least one of the following, from 2002 onward: 1. a pathology report of intestinal villous atrophy; 2. a copayment exemption for celiac disease; 3. a hospital discharge record with ICD-9-CM code of celiac disease; 4. a gluten-free food prescription. We evaluated the proportion of subjects identified by each archive and by combinations of archives, and examined the temporal relationship of the different sources in cases identified by more than one source. RESULT S: out of 962 possible cases of celiac disease, 660 (68.6%) had a pathology report, 714 (74.2%) a copayment exemption, 667 (69.3%) a hospital discharge record, and 636 (66.1%) a gluten-free food prescription. The four sources coexisted in 42.2% of subjects, whereas 30.2% were identified by two or three sources and 27.6% by a single source (16.9% by pathology reports, 4.2% by hospital discharge records, 3.9% by copayment exemptions, and 2.6% by gluten-free food prescriptions). Excluding pathology reports, 70.6% of cases were identified by at least two sources. A definition based on copayment exemptions and discharge records traced 80.5% of the 962 possible cases of celiac disease; whereas a definition based on copayment exemptions, discharge records, and gluten-free food prescriptions traced 83.1% of those cases. The temporal relationship of the different sources was compatible with the typical diagnostic pathway of subjects with celiac

  19. Technological Implications for Assessment Ecosystems: Opportunities for Digital Technology to Advance Assessment

    Science.gov (United States)

    Behrens, John T.; DiCerbo, Kristen E.

    2014-01-01

    Background: It would be easy to think the technological shifts in the digital revolution are simple incremental progressions in societal advancement. However, the nature of digital technology is resulting in qualitative differences in nearly all parts of daily life. Purpose: This paper investigates how the new possibilities for understanding,…

  20. Health Monitoring System Technology Assessments: Cost Benefits Analysis

    Science.gov (United States)

    Kent, Renee M.; Murphy, Dennis A.

    2000-01-01

    The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

  1. Guidelines for the assessment and optimization of turboexpansion technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht, Philipp; Mastandrea, Martin [TECNA Estudios y Proyectos de Ingenieria S.A. (Argentina)

    2004-07-01

    The operating performance of a turbo expansion process depends on several factors among which we find: pressure, temperature and feed stream composition, expected recovery, pressure required for residual gas and products' specifications. The evolution of markets has set the development of several technologies; it is therefore complex, and rather impossible, to establish which of those technologies represents the most suitable choice for certain conditions by simply inspecting the above-mentioned factors. Guidelines for the assessment and optimization of available technologies are presented in this work. Also, relevant matters to be taken into account in the development of different units of a turbo expansion plant are mentioned. (author)

  2. Assessment of a satellite power system and six alternative technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wolsko, T.; Whitfield, R.; Samsa, M.; Habegger, L.S.; Levine, E.; Tanzman, E.

    1981-04-01

    The satellite power system is assessed in comparison to six alternative technologies. The alternatives are: central-station terrestrial photovoltaic systems, conventional coal-fired power plants, coal-gasification/combined-cycle power plants, light water reactor power plants, liquid-metal fast-breeder reactors, and fusion. The comparison is made regarding issues of cost and performance, health and safety, environmental effects, resources, socio-economic factors, and insitutional issues. The criteria for selecting the issues and the alternative technologies are given, and the methodology of the comparison is discussed. Brief descriptions of each of the technologies considered are included. (LEW)

  3. The contribution of health technology assessment, health needs assessment, and health impact assessment to the assessment and translation of technologies in the field of public health genomics.

    Science.gov (United States)

    Rosenkötter, N; Vondeling, H; Blancquaert, I; Mekel, O C L; Kristensen, F B; Brand, A

    2011-01-01

    The European Union has named genomics as one of the promising research fields for the development of new health technologies. Major concerns with regard to these fields are, on the one hand, the rather slow and limited translation of new knowledge and, on the other hand, missing insights into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could contribute to the systematic translation and assessment of genomic health applications by focussing at population level and on public health policy making. It is shown to what extent HTA, HNA and HIA contribute to translational research by using the continuum of translational research (T1-T4) in genomic medicine as an analytic framework. The selected assessment methodologies predominantly cover 2 to 4 phases within the T1-T4 system. HTA delivers the most complete set of methodologies when assessing health applications. HNA can be used to prioritize areas where genomic health applications are needed or to identify infrastructural needs. HIA delivers information on the impact of technologies in a wider scope and promotes informed decision making. HTA, HNA and HIA provide a partly overlapping and partly unique set of methodologies and infrastructure for the translation and assessment of genomic health applications. They are broad in scope and go beyond the continuum of T1-T4 translational research regarding policy translation.

  4. Thematic accuracy assessment of the 2011 National Land Cover Database (NLCD)

    Science.gov (United States)

    Wickham, James; Stehman, Stephen V.; Gass, Leila; Dewitz, Jon; Sorenson, Daniel G.; Granneman, Brian J.; Poss, Richard V.; Baer, Lori Anne

    2017-01-01

    Accuracy assessment is a standard protocol of National Land Cover Database (NLCD) mapping. Here we report agreement statistics between map and reference labels for NLCD 2011, which includes land cover for ca. 2001, ca. 2006, and ca. 2011. The two main objectives were assessment of agreement between map and reference labels for the three, single-date NLCD land cover products at Level II and Level I of the classification hierarchy, and agreement for 17 land cover change reporting themes based on Level I classes (e.g., forest loss; forest gain; forest, no change) for three change periods (2001–2006, 2006–2011, and 2001–2011). The single-date overall accuracies were 82%, 83%, and 83% at Level II and 88%, 89%, and 89% at Level I for 2011, 2006, and 2001, respectively. Many class-specific user's accuracies met or exceeded a previously established nominal accuracy benchmark of 85%. Overall accuracies for 2006 and 2001 land cover components of NLCD 2011 were approximately 4% higher (at Level II and Level I) than the overall accuracies for the same components of NLCD 2006. The high Level I overall, user's, and producer's accuracies for the single-date eras in NLCD 2011 did not translate into high class-specific user's and producer's accuracies for many of the 17 change reporting themes. User's accuracies were high for the no change reporting themes, commonly exceeding 85%, but were typically much lower for the reporting themes that represented change. Only forest loss, forest gain, and urban gain had user's accuracies that exceeded 70%. Lower user's accuracies for the other change reporting themes may be attributable to the difficulty in determining the context of grass (e.g., open urban, grassland, agriculture) and between the components of the forest-shrubland-grassland gradient at either the mapping phase, reference label assignment phase, or both. NLCD 2011 user's accuracies for forest loss, forest gain, and urban gain compare favorably with results from other

  5. Building a medical multimedia database system to integrate clinical information: an application of high-performance computing and communications technology.

    Science.gov (United States)

    Lowe, H J; Buchanan, B G; Cooper, G F; Vries, J K

    1995-01-01

    The rapid growth of diagnostic-imaging technologies over the past two decades has dramatically increased the amount of nontextual data generated in clinical medicine. The architecture of traditional, text-oriented, clinical information systems has made the integration of digitized clinical images with the patient record problematic. Systems for the classification, retrieval, and integration of clinical images are in their infancy. Recent advances in high-performance computing, imaging, and networking technology now make it technologically and economically feasible to develop an integrated, multimedia, electronic patient record. As part of The National Library of Medicine's Biomedical Applications of High-Performance Computing and Communications program, we plan to develop Image Engine, a prototype microcomputer-based system for the storage, retrieval, integration, and sharing of a wide range of clinically important digital images. Images stored in the Image Engine database will be indexed and organized using the Unified Medical Language System Metathesaurus and will be dynamically linked to data in a text-based, clinical information system. We will evaluate Image Engine by initially implementing it in three clinical domains (oncology, gastroenterology, and clinical pathology) at the University of Pittsburgh Medical Center.

  6. Sustainability assessment of energy technologies. Towards an integrative framework

    Energy Technology Data Exchange (ETDEWEB)

    Grunwald, Armin; Roesch, Christine [Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (DE). Inst. for Technology Assessment and Systems Analysis (ITAS)

    2011-12-15

    To be able to design and use energy technologies with regard to the needs of sustainable development, sustainability assessments are necessary prior to the respective decisions. However, as is known, they pose methodological problems: from the difficulties of anticipation of future developments via the determination of assessment criteria through to the necessity to define sustainable development accurately enough. In this contribution, we will introduce an integrative sustainability concept which has hardly been discussed in the energy context. We will analyse this concept with respect to deriving general principles for the sustainability assessment of energy technologies. As a case study, we consider in particular the field of the use of grassland for biomass production for energetic purposes. The integrative concept is shown to provide an overall framework to carry out comprehensible and, above all, comparative sustainability assessments. More or less as a by-product, it can be demonstrated that sustainability means also in the energy sector much more than just environmental compatibility. (orig.)

  7. Probabilistic Databases

    CERN Document Server

    Suciu, Dan; Koch, Christop

    2011-01-01

    Probabilistic databases are databases where the value of some attributes or the presence of some records are uncertain and known only with some probability. Applications in many areas such as information extraction, RFID and scientific data management, data cleaning, data integration, and financial risk assessment produce large volumes of uncertain data, which are best modeled and processed by a probabilistic database. This book presents the state of the art in representation formalisms and query processing techniques for probabilistic data. It starts by discussing the basic principles for rep

  8. Using database technology to improve STEM student retention: A total quality management approach to early alert and intervention

    Directory of Open Access Journals (Sweden)

    Sam Khoury

    2012-04-01

    Full Text Available Students at risk of dropping out of Science, Technology, Engineering, and Mathematics (STEM programs often display signs that indicate they are at risk. A need exists to identify at risk STEM students early and to develop and implement effective intervention strategies that utilize the Total Quality Management (TQM approach. Most of all, a database system is needed to track this early intervention process, if retention rates are to be improved. To address this need at a small community college in North Carolina, a system was developed and underwent a pilot study in Fall 2009 and Spring 2010. The two pilot groups were compared to the two control groups to identify differences in retention, course credit completion rates, and grade point averages (GPA. The first pilot group displayed no significant differences, while the second pilot group displayed significant differences in most of the areas analyzed in the study, indicating a database system can be used to improve STEM student retention. While the second of the two pilot groups displayed promising results, managerial and logistical issues, such as less than optimal instructor involvement, impeded success were identified. This paper will describe the design, implementation, and the preliminary results of this study and outlines the need for further research that confirms these preliminary findings.

  9. Assessment of abuse of tianeptine from a reimbursement database using 'doctor-shopping' as an indicator.

    Science.gov (United States)

    Rouby, Frank; Pradel, Vincent; Frauger, Elisabeth; Pauly, Vanessa; Natali, François; Reggio, Patrick; Thirion, Xavier; Micallef, Joëlle

    2012-04-01

    Doctor-shopping is a patient behaviour characterized by simultaneous consultations of several physicians during the same period. Some case reports have described an abuse of tianeptine, an atypical antidepressant. Our objective was to assess the extent of abuse of this drug with a method quantifying doctor-shopping in comparison with other antidepressants and benzodiazepines (BZD). All dispensations of antidepressants and BZD during the year 2005 in a French area of 4.5 million inhabitants were extracted from a reimbursement database. For each patient, two quantities were computed: quantity dispensed and obtained by doctor-shopping. Tianeptine and other drugs were compared using their doctor-shopping indicator (DSI), defined as the percentage of drug obtained by doctor-shopping among dispensed quantity; 410 525 patients received at least one antidepressant dispensation during the year 2005. Tianeptine was the sixth most dispensed antidepressant. The DSI of tianeptine was 2.0%, ranking it first among antidepressant (the second being mianserine with a DSI of 1%). Flunitrazepam has the highest DSI (30.2%), the DSI of the five following BZD (clonazepam, zolpidem, oxazepam, diazepam, bromazepam) range from 3.0% to 2.0%. Tianeptine is associated with higher DSI, compared with other antidepressants, suggesting that it may be subject to abuse in the population. Moreover, its DSI as a measure of diversion is similar to the DSI of diazepam or bromazepam. © 2011 The Authors Fundamental and Clinical Pharmacology © 2011 Société Française de Pharmacologie et de Thérapeutique.

  10. Using online databases for landslide susceptibility assessment: an example from the Veneto Region (northeastern Italy

    Directory of Open Access Journals (Sweden)

    M. Floris

    2011-07-01

    Full Text Available In this paper, spatial data available in the Italian portals was used to evaluate the landslide susceptibility of the Euganean Hills Regional Park, located SW of Padua (northeastern Italy. Quality, applicability and possible analysis scales of the online data were investigated.

    After a brief overview on the WebGIS portals around the world, their contents and tools for natural risk analyses, a susceptibility analysis of the study area was carried out using a simple probabilistic approach that compared landslide distribution and influencing factors. The input factors used in the analysis depended on available data and included landslides, morphometric data (elevation, slope, curvature, profile and plan Curvature and non-morphometric data (land use, distance to roads and distance to rivers. Great attention was paid to the pre-processing step, in particular the re-classification of continuous data that was performed following objective, geologic and geomorphologic criteria.

    The results of the study show that the simple probabilistic approach used for the susceptibility evaluation showed quite good accuracy and precision (repeatability. However, heuristic, statistical or deterministic methods could be applied to the online data to improve the prediction.

    The data available online for the Italian territory allows susceptibility assessment at medium and large scales. Morphometric factors, such as elevation and slope angle, are important because they implicitly include information that is not available, such as lithologic and structural data. The main drawback of the Italian online databases is the lack of information on the frequency of landslides; thus, a complete hazard analysis is not possible.

    Despite the good results achieved to date, collection and sharing of data on natural risks must be improved in Italy and around the world. The creation of spatial data infrastructure and more WebGIS portals is desirable.

  11. Using online databases for landslide susceptibility assessment: an example from the Veneto Region (northeastern Italy)

    Science.gov (United States)

    Floris, M.; Iafelice, M.; Squarzoni, C.; Zorzi, L.; de Agostini, A.; Genevois, R.

    2011-07-01

    In this paper, spatial data available in the Italian portals was used to evaluate the landslide susceptibility of the Euganean Hills Regional Park, located SW of Padua (northeastern Italy). Quality, applicability and possible analysis scales of the online data were investigated. After a brief overview on the WebGIS portals around the world, their contents and tools for natural risk analyses, a susceptibility analysis of the study area was carried out using a simple probabilistic approach that compared landslide distribution and influencing factors. The input factors used in the analysis depended on available data and included landslides, morphometric data (elevation, slope, curvature, profile and plan Curvature) and non-morphometric data (land use, distance to roads and distance to rivers). Great attention was paid to the pre-processing step, in particular the re-classification of continuous data that was performed following objective, geologic and geomorphologic criteria. The results of the study show that the simple probabilistic approach used for the susceptibility evaluation showed quite good accuracy and precision (repeatability). However, heuristic, statistical or deterministic methods could be applied to the online data to improve the prediction. The data available online for the Italian territory allows susceptibility assessment at medium and large scales. Morphometric factors, such as elevation and slope angle, are important because they implicitly include information that is not available, such as lithologic and structural data. The main drawback of the Italian online databases is the lack of information on the frequency of landslides; thus, a complete hazard analysis is not possible. Despite the good results achieved to date, collection and sharing of data on natural risks must be improved in Italy and around the world. The creation of spatial data infrastructure and more WebGIS portals is desirable.

  12. The NICE ADHD health technology assessment: A review and critique

    Directory of Open Access Journals (Sweden)

    Schlander Michael

    2008-01-01

    Full Text Available Abstract Background Health technology assessments (HTAs by the National Institute for Health and Clinical Excellence (NICE enjoy high levels of international attention. The present analysis addresses NICE's appraisal of methylphenidate, atomoxetine and dexamphetamine for attention-deficit/hyperactivity disorder (ADHD in children and adolescents, published in March 2006. Methods A qualitative study of NICE Technology Appraisal No. 98 was done focusing on the >600-page technology assessment report, which aimed at evaluating ADHD treatment strategies by a clinical effectiveness review and an economic analysis using meta-analytical techniques and a cost-effectiveness model. Results The technology assessment was unable to differentiate between the various drugs in terms of efficacy, and its economic model was ultimately driven by cost differences. While the assessment concluded that the economic model "clearly identified an optimal treatment strategy" with first-line dexamphetamine, the NICE appraisal committee subsequently found it impossible to distinguish between the different strategies on grounds of cost-effectiveness. Analyzing the assessment reveals gaps and inconsistencies concerning data selection (ultimately relying on a small number of short-term studies only, data synthesis (pooling of heterogeneous study designs and clinical endpoints, and economic model structure (identifying double-counting of nonresponders as a likely source of bias, alongside further methodological anomalies. Conclusion Many conclusions of the NICE technology assessment rest on shaky grounds. There remains a need for a new, state-of-the-art systematic review of ADHD treatment strategies including economic evaluation, which ideally should address outcomes beyond children's health-related quality of life, such as long-term sequelae of the disorder and caregiver burden.

  13. Probabilistic acute dietary exposure assessments to captan and tolylfluanid using several European food consumption and pesticide concentration databases

    DEFF Research Database (Denmark)

    Boon, Polly E.; Svensson, Kettil; Moussavian, Shahnaz

    2009-01-01

    Probabilistic dietary acute exposure assessments of captan and tolylfluanid were performed for the populations of the Czech Republic, Denmark, Italy, the Netherlands and Sweden. The basis for these assessments was national databases for food consumption and pesticide concentration data harmonised...... at the level of raw agricultural commodity. Data were obtained from national food consumption surveys and national monitoring programmes and organised in an electronic platform of databases connected to probabilistic software. The exposure assessments were conducted by linking national food consumption data...... to national food consumption surveys. In this way it is possible to exchange or merge concentration data between countries in situations of data scarcity. This electronic platform in connection with probabilistic software can be seen as a prototype of a data warehouse, including a harmonised approach...

  14. Critical assessment of human metabolic pathway databases: a stepping stone for future integration

    Science.gov (United States)

    2011-01-01

    Background Multiple pathway databases are available that describe the human metabolic network and have proven their usefulness in many applications, ranging from the analysis and interpretation of high-throughput data to their use as a reference repository. However, so far the various human metabolic networks described by these databases have not been systematically compared and contrasted, nor has the extent to which they differ been quantified. For a researcher using these databases for particular analyses of human metabolism, it is crucial to know the extent of the differences in content and their underlying causes. Moreover, the outcomes of such a comparison are important for ongoing integration efforts. Results We compared the genes, EC numbers and reactions of five frequently used human metabolic pathway databases. The overlap is surprisingly low, especially on reaction level, where the databases agree on 3% of the 6968 reactions they have combined. Even for the well-established tricarboxylic acid cycle the databases agree on only 5 out of the 30 reactions in total. We identified the main causes for the lack of overlap. Importantly, the databases are partly complementary. Other explanations include the number of steps a conversion is described in and the number of possible alternative substrates listed. Missing metabolite identifiers and ambiguous names for metabolites also affect the comparison. Conclusions Our results show that each of the five networks compared provides us with a valuable piece of the puzzle of the complete reconstruction of the human metabolic network. To enable integration of the networks, next to a need for standardizing the metabolite names and identifiers, the conceptual differences between the databases should be resolved. Considerable manual intervention is required to reach the ultimate goal of a unified and biologically accurate model for studying the systems biology of human metabolism. Our comparison provides a stepping stone

  15. Critical assessment of human metabolic pathway databases: a stepping stone for future integration

    Directory of Open Access Journals (Sweden)

    Stobbe Miranda D

    2011-10-01

    Full Text Available Abstract Background Multiple pathway databases are available that describe the human metabolic network and have proven their usefulness in many applications, ranging from the analysis and interpretation of high-throughput data to their use as a reference repository. However, so far the various human metabolic networks described by these databases have not been systematically compared and contrasted, nor has the extent to which they differ been quantified. For a researcher using these databases for particular analyses of human metabolism, it is crucial to know the extent of the differences in content and their underlying causes. Moreover, the outcomes of such a comparison are important for ongoing integration efforts. Results We compared the genes, EC numbers and reactions of five frequently used human metabolic pathway databases. The overlap is surprisingly low, especially on reaction level, where the databases agree on 3% of the 6968 reactions they have combined. Even for the well-established tricarboxylic acid cycle the databases agree on only 5 out of the 30 reactions in total. We identified the main causes for the lack of overlap. Importantly, the databases are partly complementary. Other explanations include the number of steps a conversion is described in and the number of possible alternative substrates listed. Missing metabolite identifiers and ambiguous names for metabolites also affect the comparison. Conclusions Our results show that each of the five networks compared provides us with a valuable piece of the puzzle of the complete reconstruction of the human metabolic network. To enable integration of the networks, next to a need for standardizing the metabolite names and identifiers, the conceptual differences between the databases should be resolved. Considerable manual intervention is required to reach the ultimate goal of a unified and biologically accurate model for studying the systems biology of human metabolism. Our comparison

  16. Using the Utah Population Database to assess familial risk of primary open angle glaucoma.

    Science.gov (United States)

    Wang, Xiaolei; Harmon, Jennifer; Zabrieskie, Norman; Chen, Yuhong; Grob, Seanna; Williams, Brice; Lee, Clara; Kasuga, Daniel; Shaw, Peter X; Buehler, Jeanette; Wang, Ningli; Zhang, Kang

    2010-11-23

    Primary open angle glaucoma (POAG) is a leading cause of irreversible blindness in the elderly. Previous epidemiological studies have identified family history, ethnic origin, age, high intraocular pressure and diabetes mellitus as risk factors. However, it is difficult to assess the extent family history plays in this disease process. The Utah Population Database (UPDB), created by the University of Utah, has recently become a resource for which greater than 9 million records are available for use. The UPDB is divided into two major data sets from which family members can be identified, namely 1.6 million genealogy records and 2 million Utah birth certificates. This study utilizes these resources to assess the familial risk of POAG within the Utah Population. The University of Utah's hospital and clinic records were searched for patients with primary and chronic open angle glaucoma (ICD9 codes 365.04 and 365.11) between the years 1995 and 2005. A case-control analysis was then performed with specialized UPDB software that was modified to constrain the control and pedigree populations to over 1 million University of Utah-UPDB linked records. Controls were matched to cases by gender and birth year (±2.5years) with only one control being used per case. Population-attributable risk (PAR) to familial factors and relative risk (RR) were computed using conditional logistic regression (CLR). From the original 1.5 million medical records, 6198 patients with glaucoma were identified. Of these, 3391 met the inclusion criteria, which required patients to have at least one parent or one child in the UPDB. The PAR in this population was found to be 0.20, indicating 20% of the risk for glaucoma is attributable to genetic factors. CLR computations also showed a significantly increased relative risk (pfamilial data, there is a significantly higher prevalence of glaucoma in both first and second generation relatives of those affected as compared to relatives in the control group

  17. Construction of an N-nitroso database for assessing dietary intake.

    Science.gov (United States)

    Stuff, Janice E; Goh, Eugenia T; Barrera, Stephanie L; Bondy, Melissa L; Forman, Michele R

    2009-12-01

    Dietary N-nitroso compounds are carcinogens synthesized during food processing from two main classes of precursors, oxides of nitrogen and amines or amides. Quantification of the dietary intake of N-nitroso compounds is significant to human cancers, including those of the stomach and upper gastro-intestinal tract, colon, and brain. Previous studies investigating these cancers primarily used proxy estimates of N-nitroso intake and not a full and complete database. In this report, we describe the development of a database to be used in conjunction with a food frequency questionnaire (FFQ) or twenty-four hour dietary records. Published analytical data for N-nitroso compounds were compiled and evaluated for inclusion in the database. The final database consisted of 23 different N-nitroso compounds for 500 foods from 39 different food subgroups. Next, database foods were matched to foods in a standard FFQ by imputation, or calculated value, or assumed zero. Using the FFQ modified with N-nitroso values, we evaluated the ability to compute N-nitroso intakes for a sample of healthy control subjects of cancer epidemiological studies. N-nitroso content of food items ranged from sausage, smoked meats, bacon, and luncheon meats. The database is useful to quantify N-nitroso intake for observational and epidemiological studies.

  18. Teknologvurdering, Broer og Brugere (Technology Assessment: Bridges and Users)

    DEFF Research Database (Denmark)

    Munch, Birgitte

    A critique of the scientific approaches grounding Danish technology assessments for beingnon-reflexive upon the consequences of its biased treatment of who and how some countsas ‘users'. Implications and new approaches are outlined in a story of engineering designers conceptualization of ships...

  19. Assessment, Technology and Democratic Education in the Age of Data

    Science.gov (United States)

    Perrotta, Carlo

    2013-01-01

    This paper contends that powerful techniques to manipulate data, enabled by technological and economic developments, can be easily co-opted to serve the restrictive frameworks of hyper-controlling, managerial accountability that characterise current cultures of summative assessment in education. In response to these challenges, research is…

  20. Nutrition and health technology assessment: When two worlds meet

    NARCIS (Netherlands)

    M.J. Poley (Marten)

    2015-01-01

    textabstractThere is a growing recognition that nutrition may have a positive impact on public health and that it may reduce medical expenditures. Yet, such claims need to be substantiated by evidence. This evidence could be delivered by health technology assessment (HTA), which can be thought of as

  1. Integrating ethics in health technology assessment: many ways to Rome

    NARCIS (Netherlands)

    Hofmann, B.; Oortwijn, W.; Lysdahl, K. Bakke; Refolo, P.; Sacchini, D.; Wilt, G.J. van der; Gerhardus, A.

    2015-01-01

    OBJECTIVES: The aim of this study was to identify and discuss appropriate approaches to integrate ethical inquiry in health technology assessment (HTA). METHODS: The key question is how ethics can be integrated in HTA. This is addressed in two steps: by investigating what it means to integrate ethic

  2. Mapping of health technology assessment in selected countries

    NARCIS (Netherlands)

    Oortwijn, W.; Broos, P.; Vondeling, H.; Banta, D.; Todorova, L.

    2013-01-01

    Objectives: The aim of this study was to develop and apply an instrument to map the level of health technology assessment (HTA) development at country level in selected countries. We examined middle-income countries (Argentina, Brazil, India, Indonesia, Malaysia, Mexico, and Russia) and countries we

  3. Condition Assessment Technologies for Water Transmission and Distribution Systems

    Science.gov (United States)

    As part of the U.S. Environmental Protection Agency’s (EPA’s) Aging Water Infrastructure Research Program, this research was conducted to identify and characterize the state of the technology for structural condition assessment of drinking water transmission and distribution syst...

  4. Developmental toxicity testing for safety assessment: new approaches and technologies.

    Science.gov (United States)

    Knudsen, Thomas B; Kavlock, Robert J; Daston, George P; Stedman, Donald; Hixon, Mary; Kim, James H

    2011-10-01

    The ILSI Health and Environmental Sciences Institute's Developmental and Reproductive Toxicology Technical Committee held a 2-day workshop entitled "Developmental Toxicology-New Directions" in April 2009. The fourth session of this workshop focused on new approaches and technologies for the assessment of developmental toxicology. This session provided an overview of the application of genomics technologies for developmental safety assessment, the use of mouse embryonic stem cells to capture data on developmental toxicity pathways, dynamical cell imaging of zebrafish embryos, the use of computation models of development pathways and systems, and finally, high-throughput in vitro approaches being utilized by the EPA ToxCast program. Issues discussed include the challenges of anchoring in vitro predictions to relevant in vivo endpoints and the need to validate pathway-based predictions with targeted studies in whole animals. Currently, there are 10,000 to 30,000 chemicals in world-wide commerce in need of hazard data for assessing potential health risks. The traditional animal study designs for assessing developmental toxicity cannot accommodate the evaluation of this large number of chemicals, requiring that alternative technologies be utilized. Though a daunting task, technologies are being developed and utilized to make that goal reachable. © 2011 Wiley Periodicals, Inc.

  5. Early phase Technology Assessment of nanotechnology in oncology

    NARCIS (Netherlands)

    Retèl, Valesca P.; Hummel, Marjan J.M.; Harten, van Willem H.

    2008-01-01

    To perform early Technology Assessment (TA) of nanotechnology in oncology. The possibilities of nanotechnology for detection (imaging), diagnosis and treatment of cancer are subject of different research programs where major investments are concerned. As a range of bio- nanotechnologies is expected

  6. Technology assessment of automation trends in the modular home industry

    Science.gov (United States)

    Phil Mitchell; Robert Russell Hurst

    2009-01-01

    This report provides an assessment of technology used in manufacturing modular homes in the United States, and that used in the German prefabricated wooden home industry. It is the first step toward identifying the research needs in automation and manufacturing methods that will facilitate mass customization in the home manufacturing industry. Within the United States...

  7. Reimbursement of pharmaceuticals: Reference pricing versus health technology assessment

    NARCIS (Netherlands)

    M. Drummond (Michael); B. Jönsson (Bengt); F.F.H. Rutten (Frans); T. Stargardt (Tom)

    2011-01-01

    textabstractReference pricing and health technology assessment are policies commonly applied in order to obtain more value for money from pharmaceuticals. This study focussed on decisions about the initial price and reimbursement status of innovative drugs and discussed the consequences for market a

  8. Framework for dementia Quality of Life assessment with Assistive Technology

    DEFF Research Database (Denmark)

    Peterson, Carrie Beth; Prasad, Neeli R.; Prasad, Ramjee

    2010-01-01

    This paper proposes a theoretical framework for a Quality of Life (QOL) evaluation tool that is sensitive, flexible, computerized, and specific to assistive technology (AT) for dementia care. Using the appropriate evaluation tool serves to improve methodologies that are used for AT assessment...

  9. The Post-implementation Assessment of Advanced Technology Utilization

    Directory of Open Access Journals (Sweden)

    Hynek Josef

    2012-09-01

    Full Text Available Efficient utilization of advanced manufacturing technology is usually seen as one of the crucial factors in achieving competitiveness on global markets. On the other hand, there are many problems associated with the advanced technology utilization. These problems could be related to the individual phases of the relevant project life cycle - starting from the early stages of AMT projects preparation and evaluation, through various problems related to the project implementation, its integration within the company environment, up to the issues related to the efficient utilization of the already deployed system. This paper focuses on the final stage of this processwhen the post-implementation assessment should be carried out in order to determine whether all initial expectations and objectives were met and whether all the originally promised benefits were delivered. Typical problems of technology benefits evaluation together with various methods, concepts as well as metrics used in the process of the assessment will be discussed here in particular.

  10. Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

    Science.gov (United States)

    Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

    2014-10-01

    Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

  11. Early phase Technology Assessment of nanotechnology in oncology.

    Science.gov (United States)

    Retèl, Valesca P; Hummel, Marjan J M; van Harten, Willem H

    2008-01-01

    To perform early Technology Assessment (TA) of nanotechnology in oncology. The possibilities of nanotechnology for detection (imaging), diagnosis and treatment of cancer are subject of different research programs where major investments are concerned. As a range of bio- nanotechnologies is expected to enter the oncology field it is relevant to consider the various aspects involved in especially early TA. This article provides two cases of early assessment of (predecessors of) nanotechnologies: Microarray Analysis and Photodynamic Therapy implementation, which methodology can be extrapolated to other nanotechnologies in oncology. Constructive Technology Assessment (CTA) is used for the introduction of technologies that are still in a dynamic phase of development or in an early stage of diffusion. The selection of studied aspects in CTA is based on: clinical aspects (safety, efficacy, and effectiveness), economic (cost-effectiveness), patient related (QoL, ethical/juridical and psychosocial), organizational aspects (diffusion and adoption) and scenario drafting. The features of the technology and the phase of implementation are decisive for choices and timing of the specific aspects to be studied. A framework was drafted to decide on the relevant aspects. In the first case, early implementation of Microarray Analysis; clinical effectiveness, logistics, patient centeredness and scenario drafting were given priority. Related to the diffusion-phase of Photodynamic Therapy however other aspects were evaluated, such as early cost-effectiveness analysis for possible reimbursement. Often CTA will result in a mixed method design. Especially scenario drafting is a powerful instrument to predict possible developments that can be anticipated upon in the assessment. CTA is appropriate for the study of early implementation of new technologies in oncology. In early TA small series often necessitate a mix of quantitative and qualitative methods. The features of nanotechnology

  12. Human factors assessments of innovative technologies: Robotics sector

    Energy Technology Data Exchange (ETDEWEB)

    Moran, J.B. [Operating Engineers National Hazmat Program, Beaver, WV (United States)

    1997-12-01

    The U.S. Department of Energy (DOE) has funded major environmental technology developments over the past several years. One area that received significant attention is robotics, which has resulted in the development of a wide range of unique robotic systems tailored to the many tasks unique to the DOE complex. These systems are often used in highly hazardous environments, which reduces or eliminates worker exposures. The DOE, concurrent with the technology development initiative, also established and funded a 5-yr cooperative agreement intended to interface with the technology development community-with specific attention to the occupational safety and health aspects associated with individual technologies through human factors and hazard assessments. This program is now in its third year.

  13. Readings in technology assessment. [in relation to social impact and the law

    Science.gov (United States)

    1975-01-01

    Papers are presented which reflect research in the following areas: development of the concept of technology assessment; institutionalization of technology assessment; the interface between law and technology assessment; and assessment case studies. Case studies include hazards of the medical use of X-rays, environmental noise effects in transportation planning, genetic technology, impact of underground coal mining, and aircraft/airport noise abatement.

  14. DECISION ANALYSIS AND TECHNOLOGY ASSESSMENTS FOR METAL AND MASONRY DECONTAMINATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian, Ph.D.

    1999-01-01

    The purpose of this investigation was to conduct a comparative analysis of innovative technologies for the non-aggressive removal of coatings from metal and masonry surfaces and the aggressive removal of one-quarter to one-inch thickness of surface from structural masonry. The technologies tested should be capable of being used in nuclear facilities. Innovative decontamination technologies are being evaluated under standard, non-nuclear conditions at the FIU-HCET technology assessment site in Miami, Florida. This study is being performed to support the OST, the Deactivation and Decommissioning (D&D) Focus Area, and the environmental restoration of DOE facilities throughout the DOE complex by providing objective evaluations of currently available decontamination technologies.

  15. A content analysis of Health Technology Assessment programs in Latin America.

    Science.gov (United States)

    Arellano, Luis E; Reza, Mercedes; Blasco, Juan Antonio; Andradas, Elena

    2009-10-01

    Health Technology Assessment (HTA) is a relatively new concept in Latin America (LA). The objectives of this exploratory study were to identify HTA programs in LA, review HTA documents produced by those programs, and assess the extent to which HTA aims are being achieved. An electronic search through two databases was performed to identify HTA programs in LA. A content analysis was performed on HTA documents (n = 236) produced by six programs between January 2000 and March 2007. Results were analyzed by comparing document content with the main goals of HTA. The number of HTA documents increased incrementally during the study period. The documents produced were mostly short HTA documents (82 percent) that assessed technologies such as drugs (31 percent), diagnostic and/or screening technologies (18 percent), or medical procedures (18 percent). Two-thirds (66 percent) of all HTA documents addressed issues related to clinical effectiveness and economic evaluations. Ethical, social, and/or legal issues were rarely addressed (economic considerations still take precedence over ethical, social, and/or legal issues. Thus, an integrated conceptual framework in LA is wanting.

  16. 嵌入式数据库关键技术及发展趋势%The Key Technology and Development Trend of Embedded Database

    Institute of Scientific and Technical Information of China (English)

    王晓; 陈永春

    2012-01-01

    随着便携式计算设备和无线通讯技术的发展,嵌入式数据库技术已经成为一个十分活跃的研究领域,并引起了越来越广泛的关注.从嵌入式数据库的体系结构入手,讨论了嵌入式数据库的关键技术,并探讨了嵌入式数据库的发展趋势和努力方向.%With the development of portable computing devices and wireless communication technology, embedded database technology has become a very active field for researching and caused more and more attention. This article discusses the key technology of embedded database and the development trend and direction of embedded database by starting from the system structure.

  17. Probabilistic acute dietary exposure assessments to captan and tolylfluanid using several European food consumption and pesticide concentration databases.

    Science.gov (United States)

    Boon, Polly E; Svensson, Kettil; Moussavian, Shahnaz; van der Voet, Hilko; Petersen, Annette; Ruprich, Jiri; Debegnach, Francesca; de Boer, Waldo J; van Donkersgoed, Gerda; Brera, Carlo; van Klaveren, Jacob D; Busk, Leif

    2009-12-01

    Probabilistic dietary acute exposure assessments of captan and tolylfluanid were performed for the populations of the Czech Republic, Denmark, Italy, the Netherlands and Sweden. The basis for these assessments was national databases for food consumption and pesticide concentration data harmonised at the level of raw agricultural commodity. Data were obtained from national food consumption surveys and national monitoring programmes and organised in an electronic platform of databases connected to probabilistic software. The exposure assessments were conducted by linking national food consumption data either (1) to national pesticide concentration data or (2) to a pooled database containing all national pesticide concentration data. We show that with this tool national exposure assessments can be performed in a harmonised way and that pesticide concentrations of other countries can be linked to national food consumption surveys. In this way it is possible to exchange or merge concentration data between countries in situations of data scarcity. This electronic platform in connection with probabilistic software can be seen as a prototype of a data warehouse, including a harmonised approach for dietary exposure modelling.

  18. Research and Implementation of Distributed Database Technology%分布式数据库技术的研究与实现

    Institute of Scientific and Technical Information of China (English)

    杨东; 谢菲; 杨晓刚; 何遵文

    2015-01-01

    Distributed Database technology is progeny combining database technology with computer network technology. It involves parallel computing, distribution strategy ,data slice ,query optimization and distributed database concurrency control, transaction processing and recovery, etc. This paper aims to study the key technology of the distributed database, to find a new,general-purpose distributed database model to adapt to a variety of complex application scenarios ,with large data change in response to increasingly challenge.%分布式数据库技术是数据库技术与计算机网络技术[1]相结合的产物,主要技术涉及并行计算、分布策略、数据分片、查询优化以及分布式数据库系统的并发控制[2]、事务处理与恢复技术等。本文旨在通过对分布式数据库关键技术的研究,找到一种新型的、适应多种复杂应用场景的通用型分布式数据库模型,以应对日益凸显的大数据变革带来的挑战。

  19. Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

    Energy Technology Data Exchange (ETDEWEB)

    Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

    2005-10-03

    A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of

  20. Multiple criteria decision analysis for health technology assessment.

    Science.gov (United States)

    Thokala, Praveen; Duenas, Alejandra

    2012-12-01

    Multicriteria decision analysis (MCDA) has been suggested by some researchers as a method to capture the benefits beyond quality adjusted life-years in a transparent and consistent manner. The objectives of this article were to analyze the possible application of MCDA approaches in health technology assessment and to describe their relative advantages and disadvantages. This article begins with an introduction to the most common types of MCDA models and a critical review of state-of-the-art methods for incorporating multiple criteria in health technology assessment. An overview of MCDA is provided and is compared against the current UK National Institute for Health and Clinical Excellence health technology appraisal process. A generic MCDA modeling approach is described, and the different MCDA modeling approaches are applied to a hypothetical case study. A comparison of the different MCDA approaches is provided, and the generic issues that need consideration before the application of MCDA in health technology assessment are examined. There are general practical issues that might arise from using an MCDA approach, and it is suggested that appropriate care be taken to ensure the success of MCDA techniques in the appraisal process. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  1. Technological and life cycle assessment of organics processing odour control technologies.

    Science.gov (United States)

    Bindra, Navin; Dubey, Brajesh; Dutta, Animesh

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories.

  2. The study of the life cycle of technology assessment model

    Institute of Scientific and Technical Information of China (English)

    SHEN Yu-Zhi; HUANG Xun-jiang

    2001-01-01

    The life cycle of technology is one of the most important indexes to weigh up the risk of the investment to neo-tech. There are so many uncertainties because it is conditioned by a lot of factors, we can not make a rational forecasting by traditional assessment method. So this paper gives a conprehensive consideration to the factors that influence production and makes some modification to production function, and establishes the life cycle of technology assessmet model by the method of fuzzy mathematics. So it quantifies the risk of investment. We can take it as one foundational index for the decision making of the investment.

  3. Knowledge in health technology assessment: who, what, how?

    Science.gov (United States)

    Tjørnhøj-Thomsen, Tine; Hansen, Helle Ploug

    2011-10-01

    Health systems are placing more and more emphasis on designing and delivering services that are focused on the patient, and there is a growing interest in patient aspects of health policy research and health technology assessment (HTA). Only a few HTA agencies use and invest in scientific methods to generate knowledge and evidence about the patient aspects of a given technology. This raises questions about how knowledge is produced in HTA reports and what kind of knowledge is considered relevant. This article uses a Danish HTA on patient education from 2009 as empirical material for a critical examination and discussion of knowledge and knowledge production about the patient aspects of HTA.

  4. Resources for global risk assessment: the International Toxicity Estimates for Risk (ITER) and Risk Information Exchange (RiskIE) databases.

    Science.gov (United States)

    Wullenweber, Andrea; Kroner, Oliver; Kohrman, Melissa; Maier, Andrew; Dourson, Michael; Rak, Andrew; Wexler, Philip; Tomljanovic, Chuck

    2008-11-15

    The rate of chemical synthesis and use has outpaced the development of risk values and the resolution of risk assessment methodology questions. In addition, available risk values derived by different organizations may vary due to scientific judgments, mission of the organization, or use of more recently published data. Further, each organization derives values for a unique chemical list so it can be challenging to locate data on a given chemical. Two Internet resources are available to address these issues. First, the International Toxicity Estimates for Risk (ITER) database (www.tera.org/iter) provides chronic human health risk assessment data from a variety of organizations worldwide in a side-by-side format, explains differences in risk values derived by different organizations, and links directly to each organization's website for more detailed information. It is also the only database that includes risk information from independent parties whose risk values have undergone independent peer review. Second, the Risk Information Exchange (RiskIE) is a database of in progress chemical risk assessment work, and includes non-chemical information related to human health risk assessment, such as training modules, white papers and risk documents. RiskIE is available at http://www.allianceforrisk.org/RiskIE.htm, and will join ITER on National Library of Medicine's TOXNET (http://toxnet.nlm.nih.gov/). Together, ITER and RiskIE provide risk assessors essential tools for easily identifying and comparing available risk data, for sharing in progress assessments, and for enhancing interaction among risk assessment groups to decrease duplication of effort and to harmonize risk assessment procedures across organizations.

  5. Prioritizing Information Technology Investments: Assessing the Correlations among Technological Readiness, Information Technology Flexibility, and Information Technology Effectiveness

    Science.gov (United States)

    Walter, John T.

    2010-01-01

    Management's dilemma, when allocating financial resources towards the improvement of technological readiness and IT flexibility within their organizations, is to control financial risk and maximize IT effectiveness. Technological readiness is people's propensity to embrace and use technology. Its drivers are optimism, innovativeness, discomfort,…

  6. Hanford Tank Farm Vapors Abatement Technology and Vendor Proposals Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Burns, H. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Farrar, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fink, S. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-20

    Suspected chemical vapor releases from the Hanford nuclear waste tank system pose concerns for worker exposure. Washington River Protection Solutions (WRPS) contracted the Savannah River National Laboratory (SRNL) to explore abatement technologies and strategies to remediate the vapors emitted through the ventilation system. In response, SRNL conducted an evaluation of technologies to abate, or reduce, vapor emissions to below 10% of the recognized occupational exposure limits (OELs). The evaluation included a review of published literature and a broadly communicated Request for Information to commercial vendors through a Federal Business Opportunities (Fed Biz Opps) web posting. In addition, SRNL conducted a workshop and post-workshop conference calls with interested suppliers (vendors) to assess proposals of relevant technologies. This report reviews applicable technologies and summarizes the approaches proposed by the vendors who participated in the workshop and teleconference interviews. In addition, the report evaluates the estimated performance of the individual technologies for the various classes of chemical compounds present in the Hanford Chemicals of Potential Concern (COPCs) list. Similarly, the report provides a relative evaluation of the vendor proposed approaches against criteria of: technical feasibility (and maturity), design features, operational considerations, secondary waste generation, safety/regulatory, and cost / schedule. These rough order-of-magnitude (ROM) cost estimates are intended to provide a comparison basis between technologies and are not intended to be actual project estimates.

  7. Hanford Tank Farm Vapors Abatement Technology and Vendor Proposals Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Burns, H. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Farrar, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fink, S. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-20

    Suspected chemical vapor releases from the Hanford nuclear waste tank system pose concerns for worker exposure. Washington River Protection Solutions (WRPS) contracted the Savannah River National Laboratory (SRNL) to explore abatement technologies and strategies to remediate the vapors emitted through the ventilation system. In response, SRNL conducted an evaluation of technologies to abate, or reduce, vapor emissions to below 10% of the recognized occupational exposure limits (OELs). The evaluation included a review of published literature and a broadly communicated Request for Information to commercial vendors through a Federal Business Opportunities (Fed Biz Opps) web posting. In addition, SRNL conducted a workshop and post-workshop conference calls with interested suppliers (vendors) to assess proposals of relevant technologies. This report reviews applicable technologies and summarizes the approaches proposed by the vendors who participated in the workshop and teleconference interviews. In addition, the report evaluates the estimated performance of the individual technologies for the various classes of chemical compounds present in the Hanford Chemicals of Potential Concern (COPCs) list. Similarly, the report provides a relative evaluation of the vendor proposed approaches against criteria of: technical feasibility (and maturity), design features, operational considerations, secondary waste generation, safety/regulatory, and cost / schedule. These rough order magnitude (ROM) cost estimates are intended to provide a comparison basis between technologies and are not intended to be actual project estimates.

  8. Preoperative airway assessment - experience gained from a multicentre cluster randomised trial and the Danish Anaesthesia Database.

    Science.gov (United States)

    Nørskov, Anders Kehlet

    2016-05-01

    Difficulties with airway management in relation to general anaesthesia have been a challenge for the anaesthesiologist since the birth of anaesthesia. Massive landmark improvements have been made and general anaesthesia is now regarded as a safe procedure. However, rare, difficult airway management still occurs and it prompts increased risk of morbidity and mortality - especially when not anticipated. Several preoperative risk factors for airway difficulties have been identified, yet none have convincing diagnostic accuracy as stand alone tests. Combining several risk factors increase the predictive value of the test and multivariable risk models have been developed. The Simplified Airway Risk Index (SARI) is a predictive model developed for anticipation of a difficult direct laryngoscopy. However, neither the diagnostic accuracy of the SARI nor of any other model has been tested prospectively and compared with existing practice for airway assessment in a randomised trial setting. The first objective of this thesis was to quantify the proportion of unanticipated difficult intubation and difficult mask ventilation in Denmark. The second objective was to design a cluster randomised trial, using state of the art methodology, in order to test the clinical impact of using the SARI for preoperative airway assessment compared with a clinical judgement based on usual practice for airway assessment. Finally, to test if implementation of the SARI would reduce the proportion of unanticipated difficult intubation compared with usual care for airway assessment. This thesis is based on data from the Danish Anaesthesia Database (DAD). Paper 1 presents an observational cohort study on 188,064 patients who underwent tracheal intubation from 2008 to 2011. Data on the anaesthesiologists' preoperative anticipations of airway difficulties was compared with actual airway management conditions, thus enabling an estimation of the proportion of unanticipated difficulties with intubation

  9. Recent Life Assessment Technology for Existing Steam Turbines

    Science.gov (United States)

    Saito, Kiyoshi; Sakuma, Akira; Fukuda, Masataka

    A large and growing portion of electricity is produced by aging thermal power plants. Although excellent, high quality materials such as CrMoV steel and 12% Cr steel, etc. are used for the steam turbines, various forms of metallurgical degradation, due to creep and fatigue, etc. affect the parts and components during long-term operation at high temperature. Extending the life of steam turbines and ensuring high reliability requires life assessment technology, scheduled repairing, conversion, modification and upgrading of components in order to provide a stable power supply. As the high temperature parts and components of aged steam turbines are mainly metallurgically damaged by creep, fatigue and the interaction of both, life assessment combined with analytical and nondestructive methods is essential for realizing strategic plant life extension. We have developed a life assessment technology that takes material degradation into consideration, and have applied the procedure to more than 650 units and 2500 components since 1983. A rotor bore replication device was developed in 1989 for the purpose of nondestructive observation of creep voids and supporting the validity of life prediction results. This paper describes the technical features and applied experience of recent life assessment technology for existing high temperature steam turbines.

  10. Assessment of the Effectiveness of Extracorporeal Shock Wave Therapy (ESWT) For Soft Tissue Injuries (ASSERT): An Online Database Protocol

    OpenAIRE

    Maffulli, G; Hemmings, Steph; Maffulli, Nicola

    2014-01-01

    Background Soft tissue injuries and tendinopathies account for large numbers of chronic musculoskeletal disorders. Extracorporeal shockwave therapy (ESWT) is popular, and effective in the management of chronic tendon conditions in the elbow, shoulder, and pain at and around the heel. Methods/Design Ethical approval was granted from the South East London Research Ethics Committee to implement a database for the Assessment of Effectiveness of Extracorporeal Shock Wave Therapy for Soft Tis...

  11. Collaboration in health technology assessment (EUnetHTA joint action, 2010-2012): four case studies.

    Science.gov (United States)

    Huić, Mirjana; Nachtnebel, Anna; Zechmeister, Ingrid; Pasternak, Iris; Wild, Claudia

    2013-07-01

    The aim of this study was to present the first four collaborative health technology assessment (HTA) processes on health technologies of different types and life cycles targeted toward diverse HTA users and facilitators, as well as the barriers of these collaborations. Retrospective analysis, through four case studies, was performed on the first four collaboration experiences of agencies participating in the EUnetHTA Joint Action project (2010-12), comprising different types and life cycles of health technologies for a diverse target audience, and different types of collaboration. The methods used to initiate collaboration, partner contributions, the assessment methodology, report structure, time frame, and factors acting as possible barriers to and facilitators of this collaboration were described. Two ways were used to initiate collaboration in the first four collaborative HTA processes: active brokering of information, so-called "calls for collaboration," and individual contact between agencies after identifying a topic common to two agencies in the Planned and Ongoing Projects database. Several success factors are recognized: predefined project management, high degree of commitment to the project; adherence to timelines; high relevance of technology; a common understanding of the methods applied and advanced experience in HTA; finally, acceptance of English-written reports by decision makers in non-English-speaking countries. Barriers like late identification of collaborative partners, nonacceptance of English language and different methodology of assessment should be overcome. Timely and efficient, different collaborative HTA processes on relative efficacy/effectiveness and safety on different types and life cycles of health technologies, targeted toward diverse HTA users in Europe are possible. There are still barriers to overcome.

  12. An organic database system

    NARCIS (Netherlands)

    M.L. Kersten (Martin); A.P.J.M. Siebes (Arno)

    1999-01-01

    textabstractThe pervasive penetration of database technology may suggest that we have reached the end of the database research era. The contrary is true. Emerging technology, in hardware, software, and connectivity, brings a wealth of opportunities to push technology to a new level of maturity.

  13. A Hundred Year (1890 - 1990) Database for Integrated Environmental Assessments (HYDE, version 1.1)

    NARCIS (Netherlands)

    Klein Goldewijk CGM; Battjes JJ; CIM

    1997-01-01

    Testing against historical data is an important step in the validation of simulation models. Because of their wide scope and coverage, global change models require a large amount of data for testing. This update of an earlier version of a hundred-year database used to test global change models repor

  14. Teacher Learning of Technology-Enhanced Formative Assessment

    CERN Document Server

    Beatty, Ian D; Leonard, William J; Gerace, William J; Cyr, Karen St; Lee, Hyunju; Harris, Robby

    2008-01-01

    Technology-Enhanced Formative Assessment (TEFA) is a pedagogy for teaching with classroom response technology. Teacher Learning of TEFA is a five-year research project studying teacher change, in the context of an intensive professional development program designed to help science and mathematics teachers learn TEFA. First, we provide an overview of the project's participating teachers, its intervention (consisting of the technology, the pedagogy, and the professional development program), and its research design. Then, we present narratives describing the unfolding change process experienced by four teachers. Afterward, we present some preliminary findings of the research, describe a "model for the co-evolution of teacher and pedagogy" that we are developing, and identify general implications for professional development.

  15. Proposal for a state health technology assessment program.

    Science.gov (United States)

    Colmenares, Phil

    2012-08-01

    Evidence suggests that a significant number of medical technologies are of little or no benefit to patients. Under current budgetary pressures, state health care programs cannot afford continued spending on unnecessary medical care without further cuts in enrollment. Limiting coverage of high-tech care only to indications supported by good clinical evidence would help save state health care dollars. However, there is currently no public process to formally evaluate new medical interventions in Wisconsin. In fact, new therapies often are introduced into clinical practice, and covered by state health insurance programs, even when there is weak or questionable evidence of clinical effectiveness. This article proposes the creation of a state Health Technology Assessment program in Wisconsin to systematically evaluate new tests or treatments, and to promote evidence-based coverage decisions. Such a program would help limit wasteful spending on unnecessary technologies, reinforce good clinical practice, and protect patients from the risks of interventions that have not been proven effective.

  16. Technical and economic assessment of energy conversion technologies for MSW

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, W.R.

    2002-07-01

    Thermal processes for municipal solid wastes (MSW) based on pyrolysis and/or gasification that have relevance to the emerging UK market are described in this report, and the results of the technical and economical assessment of these processes are presented. The Mitsui R21 Technology, the Thermoselect Process, the Nippon Steel Waste Melting Process, the Pyropleq Process, and the Compact Power Process are selected for detailed comparison on the basis of the overall technical concept, the energy balance and the requirements for consumables, environmental performance, and the technical and commercial status of the technology. Details are also given of a comparison of the novel thermal technologies with conventional mass burn incineration for MSW.

  17. ECASTAR: Energy Conservation; an Assessment of Systems, Technologies and Requirements

    Science.gov (United States)

    1975-01-01

    A methodology for a systems approach display and assessment of the potential for energy conservation actions and the impacts of those actions was presented. The U.S. economy is divided into four sectors: energy industry, industry, residential/commercial and transportation. Each sector is assessed with respect to energy conservation actions and impacts. The four sectors are combined and three strategies for energy conservation actions for the combined sectors are assessed. The three strategies (national energy conservation, electrification and diversification) represent energy conservation actions for the near term (now to 1985), the mid term (1985 to 2000) and the far term (2000 and beyond). The assessment procedure includes input/output analysis to bridge the flows between the sectors, and net economics and net energetics as performance criteria for the conservation actions. Targets of opportunity for large net energy net energy savings and the application of technology to achieve these savings are discussed.

  18. Implementation of Relevant Methods in Assessing Traffic-Technological Projects

    Directory of Open Access Journals (Sweden)

    Danijela Barić

    2007-09-01

    Full Text Available The assessment of investment traffic-technological projectsmeans a set of activities whose basic aim is to determine the justificationand feasibility of the projects. The decision-makingprocess, including the decision-making on investments is an extremelycomplex process, and the decision-maker has to have avision of the future and make decisions accordingly in a modemand flexible manner. Therefore, the decisions need to be theresult of a planning and research process based on relevant scientificmethods. The work includes the selected, analysed andpresented methods of cost-benefit analysis, methods of multi-criteria decision-making and SWOT (Strengths, Weaknesses,Opportunities, and Threats analysis methods. Regarding thebasic characteristics, the mentioned methods have been compared,the order of their implementation has been determined,and then they have been implemented in assessing the traffic-technological projects of reconstmction with the aim of selectingthe optimal variant solution.

  19. Environmental assessment of solid waste systems and technologies: EASEWASTE

    DEFF Research Database (Denmark)

    Kirkeby, Janus Torsten; Birgisdottir, Harpa; Hansen, Trine Lund

    2006-01-01

    to optimize current waste management systems with respect to environmental achievements and by authorities to Set Guidelines and regulations and to evaluate different strategies for handling of waste. The waste hierarchy has for decades been governing waste management but the ranking of handling approaches......A new model has been developed for evaluating the overall resource consumption and environmental impacts of municipal solid waste management systems by the use of life cycle assessment. The model is named EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies) and is able...... to compare different waste management strategies, waste treatment methods and waste process technologies. The potential environmental impacts can be traced back to the most important processes and waste fractions that contribute to the relevant impacts. A model like EASEWASTE can be used by waste planners...

  20. Hospital Based Health Technology Assessment: an example from Siena

    Directory of Open Access Journals (Sweden)

    Pietro Manzi

    2015-03-01

    Full Text Available The Health Technology Assessment (HTA has emerged in recent years as a useful tool in healthcare decision-making. It is a multidisciplinary process that summarizes information about the medical, social, economic and ethical issues related to the use of a health technology and provides evidence-based information on how to allocate resources. The experience of Siena University Hospital is an example of multidisciplinary hospital-based HTA. In the present paper we summarize the organization of HTA commission and the assessment methodology of the purchase, rental or sale of medical equipment and medical devices. Furthermore we illustrate the data concerning the commission activities in 2013.http://dx.doi.org/10.7175/fe.v16i1.943

  1. Database Tomography for Technical Intelligence: A Roadmap of the Near-Earth Space Science and Technology Literature.

    Science.gov (United States)

    Kostoff, Ronald N.; Eberhart, Henry J.; Toothman, Darrell Ray

    1998-01-01

    Database Tomography (DT) is a system which includes algorithms for extracting multi-word phrase frequencies and performing phrase proximity analyses on any type of large textual database. DT was used to derive technical intelligence from a near-earth space (NES) database derived from the Science Citation Index and the Engineering Compendex.…

  2. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

  3. An assessment of acid rock drainage continuous monitoring technology

    Science.gov (United States)

    Fytas, K.; Hadjigeorgiou, J.

    1995-02-01

    In order to assess the magnitude and impact at affected mine sites of acid rock drainage (ARD), fixed-frequency sampling is often employed. This often involves manual sampling, at regular time intervals, of water and solids. It is felt that such sampling does not adequately describe the system evolution. Continuous monitoring offers a viable alternative in that it can better follow the seasonal fluctuations and high-frequency variations that characterize ARD. This paper evaluates existing continuous monitoring technology.

  4. Preliminary technology utilization assessment of the robotic fruit harvester

    Science.gov (United States)

    Wilhelm, J.

    1982-01-01

    The results of an analysis whose purpose was to examine the history and progress of mechanical fruit harvesting, to determine the significance of a robotic fruit tree harvester and to assess the available market for such a product are summarized. Background information that can be used in determining the benefit of a proof of principle demonstration is provided. Such a demonstration could be a major step toward the transfer of this NASA technology.

  5. XML based tools for assessing potential impact of advanced technology space validation

    Science.gov (United States)

    Some, Raphael R.; Weisbin, Charles

    2004-01-01

    A hierarchical XML database and related analysis tools are being developed by the New Millennium Program to provide guidance on the relative impact, to future NASA missions, of advanced technologies under consideration for developmental funding.

  6. On the JDBC-based Database Access Technology%浅析基于JDBC的数据库访问技术

    Institute of Scientific and Technical Information of China (English)

    刘拥

    2012-01-01

      As an effective data storage and management tool, database technology has been widely used, Java provides an JDBC API which not only offers a variety of database driver type, but also provides implementation of the SQL statements to manipu⁃late relational database approach, so that Java applications have the ability to access to different types of databases.%  作为一种有效的数据存贮和管理工具,数据库技术得到了广泛的应用,Java提供的JDBC API提供多种数据库驱动程序类型,提供执行SQL语句来操作关系数据库的方法,使Java应用程序具有访问不同类型的数据库的能力。

  7. Knowledge databases as instrument for a fast assessment in nuclear emergency management

    Energy Technology Data Exchange (ETDEWEB)

    Raskob, Wolfgang; Moehrle, Stella [Institute for Nuclear and Energy Technologies, Karlsruhe Institute of Technology (KIT), Hermann-von- Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2014-07-01

    The European project PREPARE (Innovative integrated tools and platforms for radiological emergency preparedness and post-accident response in Europe) aims to close gaps that have been identified in nuclear and radiological preparedness following the first evaluation of the Fukushima disaster. Among others, a work package was established to develop a so called Analytical Platform exploring the scientific and operational means to improve information collection, information exchange and the evaluation of such types of disasters. As methodological approach knowledge databases and case-based reasoning (CBR) will be used. The application of knowledge gained from previous events or the establishment of scenarios in advance to anticipate possible event developments are used in many areas, but so far not in nuclear and radiological emergency management and preparedness. However in PREPARE, knowledge databases and CBR should be combined by establishing a database, which contains historic events and scenarios, their propagation with time, and applied emergency measures and using the CBR methodology to find solutions for events that are not part of the database. The objectives are to provide information about consequences and future developments after a nuclear or radiological event and emergency measures, which include early, intermediate and late phase actions. CBR is a methodology to solve new problems by utilizing knowledge of previously experienced problem situations. In order to solve a current problem, similar problems from a case base are retrieved. Their solutions are taken and, if necessary, adapted to the current situation. The suggested solution is revised and if it is confirmed, it is stored in the case base. Hence, a CBR system learns with time by storing new cases with its solutions. CBR has many advantages, such as solutions can be proposed quickly and do not have to be made from scratch, solutions can be proposed in domains that are not understood completely

  8. Technology and economic assessment of lactic acid production and uses

    Energy Technology Data Exchange (ETDEWEB)

    Datta, R.; Tsai, S.P.

    1996-03-01

    Lactic acid has been an intermediate-volume specialty chemical (world production {approximately}50,000 tons/yr) used in a wide range of food-processing and industrial applications. Potentially, it can become a very large-volume, commodity-chemical intermediate produced from carbohydrates for feedstocks of biodegradable polymers, oxygenated chemicals, environmentally friendly ``green`` solvents, and other intermediates. In the past, efficient and economical technologies for the recovery and purification of lactic acid from fermentation broths and its conversion to the chemical or polymer intermediates had been the key technology impediments and main process cost centers. Development and deployment of novel separations technologies, such as electrodialysis with bipolar membranes, extractive and catalytic distillations, and chemical conversion, can enable low-cost production with continuous processes in large-scale operations. The emerging technologies can use environmentally sound lactic acid processes to produce environmentally useful products, with attractive process economics. These technology advances and recent product and process commercialization strategies are reviewed and assessed.

  9. Assessing effects of technology usage on mathematics learning

    Science.gov (United States)

    Lynch, Julianne

    2006-12-01

    Computer-based technologies are now commonplace in classrooms, and the integration of these media into the teaching and learning of mathematics is supported by government policy in most developed countries. However, many questions about the impact of computer-based technologies on classroom mathematics learning remain unanswered, and debates about when and how they ought to be used continue. An increasing number of studies seek to identify the effects of technology usage on classroom learning, and at a time when governments are calling for `evidence-based' policy development, many studies applying quasi-scientific methodologies to this field of practice are emerging. By analysing a series of conceptual frameworks for assessing the use of computer-based technologies to support school learning, this article emphasises the value of research into the relationship between technical and conceptual aspects of technology use in mathematics education and beyond, and challenges the usefulness of large-scale, quasi-scientific studies that focus on educational inputs and outputs.

  10. Veterans Administration Databases

    Science.gov (United States)

    The Veterans Administration Information Resource Center provides database and informatics experts, customer service, expert advice, information products, and web technology to VA researchers and others.

  11. An assessment of desiccant cooling and dehumidification technology

    Energy Technology Data Exchange (ETDEWEB)

    Mei, V.C.; Chen, F.C. (Oak Ridge National Lab., TN (United States)); Lavan, Z. (Illinois Inst. of Tech., Chicago, IL (United States)); Collier, R.K. Jr. (Collier Engineering Services, Merritt Island, FL (United States)); Meckler, G. (Gershon Meckler Associates, P.C., Herndon, VA (United States))

    1992-07-01

    Desiccant systems are heat-actuated cooling and dehumidification technology. With the recent advances in this technology, desiccant systems can now achieve a primary energy coefficient of performance (COP) between 1.3 and 1.5, with potential to go to 1.7 and higher. It is becoming one of the most promising alternatives to conventional cooling systems. Two important and well-known advantages of desiccant cooling systems are that they are CFC free and they can reduce the electricity peak load. Another important but lesser-known advantage of desiccant technology is its potential for energy conservation. The energy impact study in this report indicated that a possible 13% energy saving in residential cooling and 8% in commercial cooling is possible. Great energy saving potential also exists in the industrial sector if industrial waste heat can be used for desiccant regeneration. The latest study on desiccant-integrated building heating, ventilating, and air conditioning (HVAC) systems indicated that the initial cost for the conventional cooling equipment was greatly reduced by using desiccant technology because of downsized compressors, fans, and ductworks. This cost reduction was more than enough to offset the cost of desiccant equipment. Besides, the system operation cost was also reduced. All these indicate that desiccant systems are also cost effective. This study provides an updated state-of-the-art assessment forsiccant technology in the field of desiccant materials, systems, computer models, and theoretical analyses. From this information the technology options were derived and the future research and development needs were identified. Because desiccant technology has already been applied in the commercial building sector with very encouraging results, it is expected that future market breakthroughs will probably start in this sector. A market analysis for the commercial building application is therefore included.

  12. A quantitative and constraint-specific method to assess the potential impact of new agricultural technology : the case of frost resistant potato for the Altiplano (Peru and Bolivia)

    NARCIS (Netherlands)

    Hijmans, R.J.; Condori, B.; Carrillo, R.; Kropff, M.J.

    2003-01-01

    A quantitative and constraint-specific approach to assess the potential impact of new agricultural technology is described and applied to frost resistant potato cultivars for the Altiplano (Peru and Bolivia). The approach uses geo-referenced databases and a simulation model. Calculations are made fo

  13. The Danish Ventral Hernia Database - a valuable tool for quality assessment and research

    DEFF Research Database (Denmark)

    Helgstrand, Frederik; Jorgensen, Lars Nannestad

    2016-01-01

    AIM: The Danish Ventral Hernia Database (DVHD) provides national surveillance of current surgical practice and clinical postoperative outcomes. The intention is to reduce postoperative morbidity and hernia recurrence, evaluate new treatment strategies, and facilitate nationwide implementation...... of evidence-based treatment strategies. This paper describes the design and purpose of DVHD. STUDY POPULATION: Adult (≥18 years) patients with a Danish Civil Registration Number and undergoing surgery under elective or emergency conditions for ventral hernia in a Danish surgical department from 2007...... of operations and is an excellent tool for observing changes over time, including adjustment of several confounders. This national database registry has impacted on clinical practice in Denmark and led to a high number of scientific publications in recent years....

  14. Imaging-documented cardiovascular signal database for assessing methods for ischaemia analysis.

    Science.gov (United States)

    Taddei, A; Emdin, M; Varanini, M; Nassi, G; Bertinelli, M; Picano, E; Marchesi, C

    1997-01-01

    A new database of cardiovascular signals has recently been developed at the CNR Institute of Clinical Physiology in a study based on patients admitted to the Coronary Care Unit for suspected ischaemic heart disease (IHD), who underwent both ECG effort stress test and echo or radionuclide diagnostic imaging procedures associated with pharmacological test of myocardial ischaemia. During stress testing, in addition to 12-lead ECG, arterial blood pressure and respiration signals are measured non-invasively and recorded. Signals and representative image frames at baseline and during ischaemia are stored in the database, which is planned to include 50 cases, annotated beat by beat and archived on CD-ROM. Each case also contains resting ECG and a comprehensive patient clinical record; if possible Holter ECG and coronary arteriography frames.

  15. Database assessment of CMIP5 and hydrological models to determine flood risk areas

    Science.gov (United States)

    Limlahapun, Ponthip; Fukui, Hiromichi

    2016-11-01

    Solutions for water-related disasters may not be solved with a single scientific method. Based on this premise, we involved logic conceptions, associate sequential result amongst models, and database applications attempting to analyse historical and future scenarios in the context of flooding. The three main models used in this study are (1) the fifth phase of the Coupled Model Intercomparison Project (CMIP5) to derive precipitation; (2) the Integrated Flood Analysis System (IFAS) to extract amount of discharge; and (3) the Hydrologic Engineering Center (HEC) model to generate inundated areas. This research notably focused on integrating data regardless of system-design complexity, and database approaches are significantly flexible, manageable, and well-supported for system data transfer, which makes them suitable for monitoring a flood. The outcome of flood map together with real-time stream data can help local communities identify areas at-risk of flooding in advance.

  16. Cross-cultural adaptation of the assistive technology device - Predisposition assessment (ATD PA) for use in Brazil (ATD PA Br).

    Science.gov (United States)

    Alves, Ana Cristina de Jesus; Matsukura, Thelma Simões; Scherer, Marcia J

    2017-02-01

    The purpose of this study is to conduct a cross-cultural adaptation of the Assistive Technology Device Predisposition Assessment (ATD PA) for use in Brazil. The selection of the Assistive Technology Device Predisposition Assessment (ATD PA) was determined by previous literature reviews of articles published in 2014 and 2016 in six databases with the terms "assistive device" or "assistive technology" or "self-help device" combined with "evidence-based practice" or "framework" or "measurement scale" or "model and outcome assessment". This review indicated that the conceptual model of Assistive Technology (AT) most discussed in the literature was the Matching Person and Technology (MPT) model, and this finding determined the selection of ATD PA as an assessment within the MPT portfolio of measures. The procedures for cross-cultural adaptation were as follows: Equivalence of Concept, Semantic and Operational. Five experts were asked to translate 725 items and these translations were evaluated and a high level of agreement was demonstrated. The Portuguese version, Avaliação de Tecnologia Assistiva - Predisposição ao Uso - ATD PA Br, was derived from the original version in English (ATD PA). The ATD PA Br will support professionals and people with disabilities in Brazil to better select AT devices according to the clients' needs. Implications for rehabilitation Provides a systematic way of selecting assistive technology devices for the use of individuals with disabilities according to the Brazilian reality. A systematic way of selecting the assistive technology that can help decrease the abandonment of the assistive technology use. The use of the Matching Person and Technology theorical model and of the assessment ATD PA Br is essential to guide the researches and clinical practice in Brazil.

  17. Assessing and improving the quality of vitamin data in food composition databases

    OpenAIRE

    Roe, Mark A.; Finglas, Paul M

    2012-01-01

    The EuroFIR (European Food Information Resource; www.eurofir.org) project has developed the first comprehensive pan-European Food Data Platform, using state-of-the-art database linking. Data from 25 countries are available online (www.eurofir. org) and include vitamin contents of an extensive range of over 27,000 foods. The datasets have been compiled based on a technical standard developed within the project and this standardisation of data allows effective management, updating, extending, a...

  18. Assessment of Residential History Generation Using a Public-Record Database

    Directory of Open Access Journals (Sweden)

    David C. Wheeler

    2015-09-01

    Full Text Available In studies of disease with potential environmental risk factors, residential location is often used as a surrogate for unknown environmental exposures or as a basis for assigning environmental exposures. These studies most typically use the residential location at the time of diagnosis due to ease of collection. However, previous residential locations may be more useful for risk analysis because of population mobility and disease latency. When residential histories have not been collected in a study, it may be possible to generate them through public-record databases. In this study, we evaluated the ability of a public-records database from LexisNexis to provide residential histories for subjects in a geographically diverse cohort study. We calculated 11 performance metrics comparing study-collected addresses and two address retrieval services from LexisNexis. We found 77% and 90% match rates for city and state and 72% and 87% detailed address match rates with the basic and enhanced services, respectively. The enhanced LexisNexis service covered 86% of the time at residential addresses recorded in the study. The mean match rate for detailed address matches varied spatially over states. The results suggest that public record databases can be useful for reconstructing residential histories for subjects in epidemiologic studies.

  19. A consumer involvement model for health technology assessment in Canada.

    Science.gov (United States)

    Pivik, Jayne; Rode, Elisabeth; Ward, Christopher

    2004-08-01

    Similar to other health policy initiatives, there is a growing movement to involve consumers in decisions affecting their treatment options. Access to treatments can be impacted by decisions made during a health technology assessment (HTA), i.e., the rigorous assessment of medical interventions such as drugs, vaccines, devices, materials, medical and surgical procedures and systems. The purpose of this paper was to empirically assess the interest and potential mechanisms for consumer involvement in HTA by identifying what health consumer organizations consider meaningful involvement, examining current practices internationally and developing a model for involvement based on identified priorities and needs. Canadian health consumer groups representing the largest disease or illness conditions reported a desire for involvement in HTA and provided feedback on mechanisms for facilitating their involvement.

  20. The politics of health technology assessment in Poland.

    Science.gov (United States)

    Ozieranski, Piotr; McKee, Martin; King, Lawrence

    2012-12-01

    First, to identify risks associated with the scientific evaluation of drugs considered for state reimbursement in Poland through exploring strategies of influence employed by multinational drug companies in relation to the Agency for Health Technology Assessment (AHTAPol). Second, to ascertain whether the outcomes of drug evaluation meet the interests of the public payer in reimbursing cost-effective drugs supported by robust pharmacoeconomic evidence. We conducted 109 in-depth semi-structured interviews with a purposive sample of stakeholders involved in the reimbursement process in Poland. We analysed four available documentary sources, including recommendations issued by the AHTAPol. AHTAPol recommendations were an instrumental part of the blame avoidance strategy by political elites. Drug producers utilised direct and indirect strategies of influence. The direct strategies involved building relationships with a circle of health technology assessment analysts and medical experts working for the Agency. The indirect strategies employed leaders of opinion in the medical milieu, patient organisations, and political elites to endorse policy positions favourable to drug companies. The AHTAPol positively recommended an increasing proportion of the drugs it assessed, many of them reported as not cost-effective or supported by dubious pharmacoeconomic evidence. The strategies of influence entail a number of risks that may undermine the scientific evaluation of drugs. Some outcomes of drug evaluation may favour the interests of multinational drug companies over those of the public payer. We suggest that the risks involved in drug evaluation might be mitigated through (1) professionalization of health technology assessment; (2) restriction of job seeking and post public-payer employment; (3) disclosure and management of experts' conflicts of interest; (4) institutionalisation of patient and public involvement; and (5) increased institutional separation of the AHTAPol from

  1. RESEARCH AND DEVELOPMENT MULTICRITERIAL ECONOMIC AND MATHEMATICAL MODELS COMPREHENSIVE ASSESSMENT TECHNOLOGY GROWING CROPS

    Directory of Open Access Journals (Sweden)

    Loyko V. I.

    2016-10-01

    Full Text Available Production and processing of grains formed in the national economic system of the country a number of cereals-governmental sectors, such as grain production, grain elevator industry, flour, cereals and mixed fodder production, which constitute the grain complex country. The significance and role of the grain as a commodity in the state economy can not be overestimated. This product, is totally liquid, which has a constant, steady demand at any time of the year, in any region. Ongoing measures to increase grain production and improve its implementation did not have a complex character, therefore, insignificant effect on the efficiency of the industry and the competitiveness of grain production. The shortagecovered by imports.According to the characteristics of management in agriculture, it should be emphasized that the absence of objective and timely information at all stages of production of the plant-breeding, and as a result, non-optimal choice of technology of cultivation of agricultural crops, might result in the fact that the cost of labor and material resources increases significantly, the company does not receive profits, and sometimes suffers losses. When selecting cultivation technology for agricultural crops, an agronomist has a database of more than a hundred times-personal of alternative technologies for each crop. It is up to the decision-maker (DMP to find specific criteria to select the most suitable (for the owners and the climatic zone technology of cultivating for the culture. These circumstances explain the relevance of in-depth research of economic and mathematical models and methods of analysis and evaluation of the economic efficiency of technologies of cultivation agricultural crops. The article deals with the process of developing multicriteria economic-mathematical model of a comprehensive assessment of technology of cultivation of agricultural crops.

  2. Connected Classroom Technology Facilitates Multiple Components of Formative Assessment Practice

    Science.gov (United States)

    Shirley, Melissa L.; Irving, Karen E.

    2015-02-01

    Formative assessment has been demonstrated to result in increased student achievement across a variety of educational contexts. When using formative assessment strategies, teachers engage students in instructional tasks that allow the teacher to uncover levels of student understanding so that the teacher may change instruction accordingly. Tools that support the implementation of formative assessment strategies are therefore likely to enhance student achievement. Connected classroom technologies (CCTs) include a family of devices that show promise in facilitating formative assessment. By promoting the use of interactive student tasks and providing both teachers and students with rapid and accurate data on student learning, CCT can provide teachers with necessary evidence for making instructional decisions about subsequent lessons. In this study, the experiences of four middle and high school science teachers in their first year of implementing the TI-Navigator™ system, a specific type of CCT, are used to characterize the ways in which CCT supports the goals of effective formative assessment. We present excerpts of participant interviews to demonstrate the alignment of CCT with several main phases of the formative assessment process. CCT was found to support implementation of a variety of instructional tasks that generate evidence of student learning for the teacher. The rapid aggregation and display of student learning evidence provided teachers with robust data on which to base subsequent instructional decisions.

  3. Expanding Health Technology Assessments to Include Effects on the Environment.

    Science.gov (United States)

    Marsh, Kevin; Ganz, Michael L; Hsu, John; Strandberg-Larsen, Martin; Gonzalez, Raquel Palomino; Lund, Niels

    2016-01-01

    There is growing awareness of the impact of human activity on the climate and the need to stem this impact. Public health care decision makers from Sweden and the United Kingdom have started examining environmental impacts when assessing new technologies. This article considers the case for incorporating environmental impacts into the health technology assessment (HTA) process and discusses the associated challenges. Two arguments favor incorporating environmental impacts into HTA: 1) environmental changes could directly affect people's health and 2) policy decision makers have broad mandates and objectives extending beyond health care. Two types of challenges hinder this process. First, the nascent evidence base is insufficient to support the accurate comparison of technologies' environmental impacts. Second, cost-utility analysis, which is favored by many HTA agencies, could capture some of the value of environmental impacts, especially those generating health impacts, but might not be suitable for addressing broader concerns. Both cost-benefit and multicriteria decision analyses are potential methods for evaluating health and environmental outcomes, but are less familiar to health care decision makers. Health care is an important and sizable sector of the economy that could warrant closer policy attention to its impact on the environment. Considerable work is needed to track decision makers' demands, augment the environmental evidence base, and develop robust methods for capturing and incorporating environmental data as part of HTA.

  4. Gender in health technology assessment: pilot study on agency approaches.

    Science.gov (United States)

    Panteli, Dimitra; Zentner, Annette; Storz-Pfennig, Philipp; Busse, Reinhard

    2011-07-01

    Gender as a social construct is a recognized health determinant. Because best practice in reporting health technology assessment (HTA) clearly specifies the need to appraise a technology's social impact within the target population, the extent to which gender issues are taken into account in HTA production is of interest, not only in light of equitable practices but also for reasons of effectiveness. The aim of this study is to provide a first assessment of the degree of gender sensitivity shown by HTA agencies around the world today. The Web sites of sixty HTA agencies were analyzed. The consideration of gender aspects was specifically looked for in each agency's general mission statement, its priority setting process, and its methodological approach. Additionally, specific gender-oriented initiatives not belonging to any of the aforementioned categories were identified. Of the sixty agencies, less than half mention a commitment to addressing the social implication of health technologies. Only fifteen institutions make information on their priority setting principles available on their Web sites and gender was an issue in two of those cases. Data on methodology were obtainable online from 18 agencies, two of which mentioned gender issues explicitly. Finally, gender-oriented initiatives were identified by thirteen agencies. A gender-sensitive approach is apparently rarely adopted in current HTA production. Exceptional practices and relevant tools do exist and could serve as examples to be promoted by international collaborative networks.

  5. Development and Implementation of Health Technology Assessment: A Policy Study

    Directory of Open Access Journals (Sweden)

    P Abooee

    2013-01-01

    Full Text Available Background: To provide an overview of the development of health technology assessment (HTA in Iran since 2007, and to facilitate further development of HTA and its integration into policy making.Methods: Data of this study were collected through key documents (e.g. literature, laws, and other official documentation and analyzed by experts of opinion in form of qualitative methods.Results: Health technology assessment entered to the political agenda in Iran only in 2007 with a strong impetus of an evidence-based medicine movement with the bellow objectives: Institutionalization of evidence-based decision making in Ministry of Health, Creating an localization for structural HTA in Health system of Iran, Setting up training courses in order to educate capable manpower to full up the capacity of the universities, Establishment of a new field in HTA subject in medical universities for MSc and PhD degree, International communication about HTA through national website and possible participation in international Congress.Conclusion: HTA has been established in the healthcare system of Iran but what is needed is a clear political will to push forward the objectives of HTA in Iran. Similar to other countries, advance the regulation on the adoption of new health technologies to improve not only technical or allocate efficiency, but also health equity.

  6. DMPD: Cytokines, PGE2 and endotoxic fever: a re-assessment. [Dynamic Macrophage Pathway CSML Database

    Lifescience Database Archive (English)

    Full Text Available 15967158 Cytokines, PGE2 and endotoxic fever: a re-assessment. Blatteis CM, Li S, L... (.svg) (.html) (.csml) Show Cytokines, PGE2 and endotoxic fever: a re-assessment. PubmedID 15967158 Title C...ytokines, PGE2 and endotoxic fever: a re-assessment. Authors Blatteis CM, Li S, L

  7. Environmental assessment of digestate treatment technologies using LCA methodology.

    Science.gov (United States)

    Vázquez-Rowe, Ian; Golkowska, Katarzyna; Lebuf, Viooltje; Vaneeckhaute, Céline; Michels, Evi; Meers, Erik; Benetto, Enrico; Koster, Daniel

    2015-09-01

    The production of biogas from energy crops, organic waste and manure has augmented considerably the amounts of digestate available in Flanders. This has pushed authorities to steadily introduce legislative changes to promote its use as a fertilising agent. There is limited arable land in Flanders, which entails that digestate has to compete with animal manure to be spread. This forces many anaerobic digestion plants to further treat digestate in such a way that it can either be exported or the nitrogen be removed. Nevertheless, the environmental impact of these treatment options is still widely unknown, as well as the influence of these impacts on the sustainability of Flemish anaerobic digestion plants in comparison to other regions where spreading of raw digestate is allowed. Despite important economic aspects that must be considered, the use of Life Cycle Assessment (LCA) is suggested in this study to identify the environmental impacts of spreading digestate directly as compared to four different treatment technologies. Results suggest relevant environmental gains when the digestate mix is treated using the examined conversion technologies prior to spreading, although important trade-offs between impact categories were observed and discussed. The promising results of digestate conversion technologies suggest that further LCA analyses should be performed to delve into, for instance, the appropriateness to shift to nutrient recovery technologies rather than digestate conversion treatments.

  8. Stochastic Technology Choice Model for Consequential Life Cycle Assessment.

    Science.gov (United States)

    Kätelhön, Arne; Bardow, André; Suh, Sangwon

    2016-12-06

    Discussions on Consequential Life Cycle Assessment (CLCA) have relied largely on partial or general equilibrium models. Such models are useful for integrating market effects into CLCA, but also have well-recognized limitations such as the poor granularity of the sectoral definition and the assumption of perfect oversight by all economic agents. Building on the Rectangular-Choice-of-Technology (RCOT) model, this study proposes a new modeling approach for CLCA, the Technology Choice Model (TCM). In this approach, the RCOT model is adapted for its use in CLCA and extended to incorporate parameter uncertainties and suboptimal decisions due to market imperfections and information asymmetry in a stochastic setting. In a case study on rice production, we demonstrate that the proposed approach allows modeling of complex production technology mixes and their expected environmental outcomes under uncertainty, at a high level of detail. Incorporating the effect of production constraints, uncertainty, and suboptimal decisions by economic agents significantly affects technology mixes and associated greenhouse gas (GHG) emissions of the system under study. The case study also shows the model's ability to determine both the average and marginal environmental impacts of a product in response to changes in the quantity of final demand.

  9. Information technologies for global resources management and environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, A.P.; Wang, Hua.

    1992-01-01

    Recent advances in computer and communications technologies offer unprecedented opportunities to develop sophisticated information resources management systems for global resources management and environment assessment in an efficient, effective, and systematic manner. In this paper, the emerging global energy and environmental issues are identified. Since satellite-based remote sensing systems are becoming increasingly available and produce massive data collections, the utilization of imaging processing techniques and their applications for regional and global resources management and environmental studies are described. Interoperability and interconnectivity among heterogeneous computer systems are major issues in designing a totally integrated, multimedia-based, information resources management system that operates in a networking environment. Discussions of the future technology trends are focused on a number of emerging information management technologies and communications standards which will aid in achieving seamless system integration and offer user-friendly operations. It can be foreseen that advances in computer and communications technologies, increasingly sophisticated image processing techniques and Geographical Information Systems (GIS), and the development of globally comprehensive data bases will bring global visualization'' onto multimedia desktop computers before the end of this decade.

  10. Information technologies for global resources management and environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, A.P.; Wang, Hua

    1992-09-01

    Recent advances in computer and communications technologies offer unprecedented opportunities to develop sophisticated information resources management systems for global resources management and environment assessment in an efficient, effective, and systematic manner. In this paper, the emerging global energy and environmental issues are identified. Since satellite-based remote sensing systems are becoming increasingly available and produce massive data collections, the utilization of imaging processing techniques and their applications for regional and global resources management and environmental studies are described. Interoperability and interconnectivity among heterogeneous computer systems are major issues in designing a totally integrated, multimedia-based, information resources management system that operates in a networking environment. Discussions of the future technology trends are focused on a number of emerging information management technologies and communications standards which will aid in achieving seamless system integration and offer user-friendly operations. It can be foreseen that advances in computer and communications technologies, increasingly sophisticated image processing techniques and Geographical Information Systems (GIS), and the development of globally comprehensive data bases will bring ``global visualization`` onto multimedia desktop computers before the end of this decade.

  11. Reserach on the Teaching Reformation of Database Technology Course%《数据库技术》课程教学改革研究

    Institute of Scientific and Technical Information of China (English)

    崔亚楠

    2012-01-01

    Analyzes the current problems of Database Technology in the teaching process. Explains how to make teaching reformation on curriculum hours arrangements, theoretical teaching, experimen- tal teaching, practice teaching, assessment means and so on. The purpose is to improve the stu- dents overall quality through a series of reformation measures and programs, such as proficien- cy on basic theory, hands-on skills, teamwork ability.%从当前《数据库技术》课程在教学过程存在的问题进行分析,有针对性地从课时安排、理论教学、实验教学、综合实践教学、考核手段等方面阐述如何进行教学改革。通过一系列的改革措施和方案,旨在从基础理论掌握能力、动手实践能力、团队合作能力等方面提高学生的综合素质。

  12. Fast evaluation of tsunami scenarios: uncertainty assessment for a Mediterranean Sea database

    Science.gov (United States)

    Molinari, Irene; Tonini, Roberto; Lorito, Stefano; Piatanesi, Alessio; Romano, Fabrizio; Melini, Daniele; Hoechner, Andreas; Gonzàlez Vida, José M.; Maciás, Jorge; Castro, Manuel J.; de la Asunción, Marc

    2016-12-01

    We present a database of pre-calculated tsunami waveforms for the entire Mediterranean Sea, obtained by numerical propagation of uniformly spaced Gaussian-shaped elementary sources for the sea level elevation. Based on any initial sea surface displacement, the database allows the fast calculation of full waveforms at the 50 m isobath offshore of coastal sites of interest by linear superposition. A computationally inexpensive procedure is set to estimate the coefficients for the linear superposition based on the potential energy of the initial elevation field. The elementary sources size and spacing is fine enough to satisfactorily reproduce the effects of M> = 6.0 earthquakes. Tsunami propagation is modelled by using the Tsunami-HySEA code, a GPU finite volume solver for the non-linear shallow water equations. Like other existing methods based on the initial sea level elevation, the database is independent on the faulting geometry and mechanism, which makes it applicable in any tectonic environment. We model a large set of synthetic tsunami test scenarios, selected to explore the uncertainty introduced when approximating tsunami waveforms and their maxima by fast and simplified linear combination. This is the first time to our knowledge that the uncertainty associated to such a procedure is systematically analysed and that relatively small earthquakes are considered, which may be relevant in the near-field of the source in a complex tectonic setting. We find that non-linearity of tsunami evolution affects the reconstruction of the waveforms and of their maxima by introducing an almost unbiased (centred at zero) error distribution of relatively modest extent. The uncertainty introduced by our approximation can be in principle propagated to forecast results. The resulting product then is suitable for different applications such as probabilistic tsunami hazard analysis, tsunami source inversions and tsunami warning systems.

  13. Assessing U.S. ESCO industry performance and market trends: Results from the NAESCO database project

    Energy Technology Data Exchange (ETDEWEB)

    Osborn, Julie; Goldman, Chuck; Hopper, Nicole; Singer, Terry

    2002-05-15

    The U.S. Energy Services Company (ESCO) industry is often cited as the most successful model for the private sector delivery of energy-efficiency services. This study documents actual performance of the ESCO industry in order to provide policymakers and investors with objective informative and customers with a resource for benchmarking proposed projects relative to industry performance. We have assembled a database of nearly 1500 case studies of energy-efficiency projects - the most comprehensive data set of the U.S. ESCO industry available. These projects include $2.55B of work completed by 51 ESCOs and span much of the history of this industry.

  14. A Framework for Assessment of Aviation Safety Technology Portfolios

    Science.gov (United States)

    Jones, Sharon M.; Reveley, Mary S.

    2014-01-01

    The programs within NASA's Aeronautics Research Mission Directorate (ARMD) conduct research and development to improve the national air transportation system so that Americans can travel as safely as possible. NASA aviation safety systems analysis personnel support various levels of ARMD management in their fulfillment of system analysis and technology prioritization as defined in the agency's program and project requirements. This paper provides a framework for the assessment of aviation safety research and technology portfolios that includes metrics such as projected impact on current and future safety, technical development risk and implementation risk. The paper also contains methods for presenting portfolio analysis and aviation safety Bayesian Belief Network (BBN) output results to management using bubble charts and quantitative decision analysis techniques.

  15. Health technology assessment in Australia: a role for clinical registries?

    Science.gov (United States)

    Scott, Anna Mae

    2016-03-31

    Objective Health technology assessment (HTA) is a process of assessing evidence to inform policy decisions about public subsidy of new drugs and medical procedures. Where evidence is uncertain but the technology itself is promising, funders may recommend funding on an interim basis. It is unknown whether evidence from clinical registries is used to resolve uncertainties identified in interim-funded decisions made by Australian HTA bodies. Therefore, the present study evaluated the role of evidence from clinical registries in resolving evidence uncertainties identified by the Medical Services Advisory Committee (MSAC).Methods All HTAs considered by MSAC between 1998 and 2015 were reviewed and assessments that recommended interim funding were identified. The MSAC website was searched to identify reassessments of these recommendations and sources of evidence used to resolve the uncertainties were identified.Results Of 173 HTA reports considered by MSAC, 17 (10%) contained an interim funding recommendation. Eight recommendations cited uncertainty around safety, 15 cited uncertainty around clinical effectiveness and 13 cited uncertainty around economics (cost-effectiveness and/or budget impact). Of the 17 interim funding recommendations, 11 (65%) have been reassessed. Only two reassessments relied on clinical registry evidence to resolve evidence gaps identified at the time of the interim funding recommendation.Conclusions Clinical registries are underused as a source of evidence for resolving uncertainties around promising new health technologies in Australia. An open dialogue between stakeholders on the role of registries in this context is needed.What is known about the topic? HTA is a process of assessing the evidence to inform policy decisions about public subsidy of new health technologies (e.g. pharmaceuticals, diagnostic tests, medical procedures). Where evidence is uncertain but the technology under evaluation is promising, funders may recommend the funding of

  16. Logical database design principles

    CERN Document Server

    Garmany, John; Clark, Terry

    2005-01-01

    INTRODUCTION TO LOGICAL DATABASE DESIGNUnderstanding a Database Database Architectures Relational Databases Creating the Database System Development Life Cycle (SDLC)Systems Planning: Assessment and Feasibility System Analysis: RequirementsSystem Analysis: Requirements Checklist Models Tracking and Schedules Design Modeling Functional Decomposition DiagramData Flow Diagrams Data Dictionary Logical Structures and Decision Trees System Design: LogicalSYSTEM DESIGN AND IMPLEMENTATION The ER ApproachEntities and Entity Types Attribute Domains AttributesSet-Valued AttributesWeak Entities Constraint

  17. The Health Technology Assessment of companion diagnostics: experience of NICE.

    Science.gov (United States)

    Byron, Sarah K; Crabb, Nick; George, Elisabeth; Marlow, Mirella; Newland, Adrian

    2014-03-15

    Companion diagnostics are used to aid clinical decision making to identify patients who are most likely to respond to treatment. They are becoming increasingly important as more new pharmaceuticals receive licensed indications that require the use of a companion diagnostic to identify the appropriate patient subgroup for treatment. These pharmaceuticals have proven benefit in the treatment of some cancers and other diseases, and also have potential to precisely tailor treatments to the individual in the future. However, the increasing use of companion diagnostics could place a substantial burden on health system resources to provide potentially high volumes of testing. This situation, in part, has led policy makers and Health Technology Assessment (HTA) bodies to review the policies and methods used to make reimbursement decisions for pharmaceuticals requiring companion diagnostics. The assessment of a pharmaceutical alongside the companion diagnostic used in the clinical trials may be relatively straightforward, although there are a number of challenges associated with assessing pharmaceuticals where a range of alternative companion diagnostics are available for use in routine clinical practice. The UK HTA body, the National Institute for Health and Care Excellence (NICE), has developed policy for considering companion diagnostics using its Technology Appraisal and Diagnostics Assessment Programs. Some HTA bodies in other countries have also adapted their policies and methods to accommodate the assessment of companion diagnostics. Here, we provide insight into the HTA of companion diagnostics for reimbursement decisions and how the associated challenges are being addressed, in particular by NICE. See all articles in this CCR Focus section, "The Precision Medicine Conundrum: Approaches to Companion Diagnostic Co-development."

  18. Potential use of an arthropod database to support the non-target risk assessment and monitoring of transgenic plants.

    Science.gov (United States)

    Romeis, Jörg; Meissle, Michael; Alvarez-Alfageme, Fernando; Bigler, Franz; Bohan, David A; Devos, Yann; Malone, Louise A; Pons, Xavier; Rauschen, Stefan

    2014-12-01

    Worldwide, plants obtained through genetic modification are subject to a risk analysis and regulatory approval before they can enter the market. An area of concern addressed in environmental risk assessments is the potential of genetically modified (GM) plants to adversely affect non-target arthropods and the valued ecosystem services they provide. Environmental risk assessments are conducted case-by-case for each GM plant taking into account the plant species, its trait(s), the receiving environments into which the GM plant is to be released and its intended uses, and the combination of these characteristics. To facilitate the non-target risk assessment of GM plants, information on arthropods found in relevant agro-ecosystems in Europe has been compiled in a publicly available database of bio-ecological information during a project commissioned by the European Food Safety Authority (EFSA). Using different hypothetical GM maize case studies, we demonstrate how the information contained in the database can assist in identifying valued species that may be at risk and in selecting suitable species for laboratory testing, higher-tier studies, as well as post-market environmental monitoring.

  19. Historical development of health technology assessment in Thailand.

    Science.gov (United States)

    Teerawattananon, Yot; Tantivess, Sripen; Yothasamut, Jomkwan; Kingkaew, Pritaporn; Chaisiri, Kakanang

    2009-07-01

    This study aims to review the development of health technology assessment (HTA), including the socioeconomic context, outputs, and policy utilization in the Thai setting. This study was conducted through extensive document reviews including these published in both domestic and international literature. Evidence suggests that contextual elements of the health system, especially the country's economic status and health financing reforms, as well as their effects on government budgeting for medical and public health services, played an important role in the increasing needs and demands for HTA information among policy makers. In the midst of substantial economic growth during the years 1982 to 1996, several studies reported the rapid diffusion and poor distribution of health technologies, and inequitable access to high-cost technology in public and private hospitals. At the same time, economic analysis and its underpinning concept of efficiency were suggested by groups of scholars and health officials to guide national policy on the investment in health technology equipment. Related research and training programs were subsequently launched. However, none of these HTA units could be institutionalized into national bodies. From 1997 to 2005, an economic recession, followed by the introduction of a universal health coverage plan, triggered the demands for effective measures for cost containment and prioritization of health interventions. This made policy makers and researchers at the Ministry of Public Health (MOPH) pay increasing attention to economic appraisals, and several HTA programs were established in the Ministry. Despite the rising number of Thai health economic publications, a major problem at that period involved the poor quality of studies. Since 2006, economic recovery and demands from different interests to include expensive technologies in the public health benefit package have been crucial factors promoting the role of HTA in national policy decisions

  20. APPLICATION OF THE UNIFIED STATISTICAL MATERIAL DATABASE FOR DESIGN AND LIFE/RISK ASSESSMENT OF HIGH TEMPERATURE COMPONENTS

    Institute of Scientific and Technical Information of China (English)

    K.Fujiyama; T.Fujiwara; Y.Nakatani; K.Saito; A.Sakuma; Y.Akikuni; S.Hayashi; S.Matsumoto

    2004-01-01

    Statistical manipulation of material data was conducted for probabilistic life assessment or risk-based design and maintenance for high temperature components of power plants. To obtain the statistical distribution of material properties, dominant parameters affecting material properties are introduced into normalization of statistical variables. Those parameters are hardness, chemical composition, characteristic microstructural features and so on. Creep and fatigue properties are expressed by normalized parameters and the unified statistical distributions are obtained. These probability distribution functions show good coincidence statistically with the field database of steam turbine components. It was concluded that the unified statistical baseline approach is useful for the risk management of components in power plants.

  1. Technology assessment of applied techniques for exploitation of geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    1977-04-01

    Studies were made to elucidate the effects of technological development of natural steam and hot water on the general social and industrial environments. These were followed by studies of enhanced methods for the forecasting of these impacts. The studies included assessments of actual conditions and the preparation of regional models, ranging from rural to urban-fringe situations. The economic implications of geothermal development in various regional situations are discussed, and the models developed provide for the integration of new data and their extrapolation to as yet uncertain situations.

  2. Assessment of Wave Energy in the South China Sea Based on GIS Technology

    Directory of Open Access Journals (Sweden)

    Gang Lin

    2017-01-01

    Full Text Available China is now the world’s largest user of coal and also has the highest greenhouse gas emissions associated with the mining and use of coal. Under today’s enormous pressures of the growing shortage of conventional energy sources and the need for emission reductions, the search for clean energy is the most effective strategy to address the energy crisis and global warming. This study utilized satellite remote sensing technology, geographic information system (GIS technology, and simulated wave data for the South China Sea. The characteristic features of the wave energy were obtained by analysis through the wave resource assessment formula and the results were stored in a GIS database. Software for the evaluation of wave energy in the South China Sea was written. The results should provide accurate, efficient references for wave energy researchers and decision-makers. Based on a 24-year WW3 model simulation wave data and GIS technology, this study presented the characteristic of the wave energy in the SCS; results demonstrated that the SCS has the feasibility and viability for wave energy farming.

  3. Thinking Tools in Computer-Based Assessment: Technology Enhancements in Assessments for Learning

    Science.gov (United States)

    Rosen, Yigal

    2014-01-01

    One of the greatest concerns in schools today is how teachers can bring together assessment and learning in a way that is meaningful for students' thinking skills, while focusing on content standards. Better understanding of how different types of technology based thinking tools can be used for improving classroom teaching and learning,…

  4. Available technology for indirect conversion of coal to methanol and gasoline: a technology and economics assessment. [Technology assessment and comparative evaluation of available processes

    Energy Technology Data Exchange (ETDEWEB)

    Wham, R. M.; Forrester, III, R. C.

    1980-01-01

    The objective of the work was to review and assess the present state of the art of indirect liquid fuels synthesis, with particular emphasis to be placed upon those processes which produce methanol suitable for use as fuel. Following this review, four conceptual designs for indirect conversion of a Western subbituminous coal to methanol and gasoline were prepared. Capital and operating costs for each of the four cases were then estimated. This information was used to calculate the required product selling prices under a base case set of financial ground rules. Results of the methanol production technology assessment and economic assessments of four coal conversion plants are presented.

  5. Life Cycle Assessment of Titania Perovskite Solar Cell Technology for Sustainable Design and Manufacturing.

    Science.gov (United States)

    Zhang, Jingyi; Gao, Xianfeng; Deng, Yelin; Li, Bingbing; Yuan, Chris

    2015-11-01

    Perovskite solar cells have attracted enormous attention in recent years due to their low cost and superior technical performance. However, the use of toxic metals, such as lead, in the perovskite dye and toxic chemicals in perovskite solar cell manufacturing causes grave concerns for its environmental performance. To understand and facilitate the sustainable development of perovskite solar cell technology from its design to manufacturing, a comprehensive environmental impact assessment has been conducted on titanium dioxide nanotube based perovskite solar cells by using an attributional life cycle assessment approach, from cradle to gate, with manufacturing data from our laboratory-scale experiments and upstream data collected from professional databases and the literature. The results indicate that the perovskite dye is the primary source of environmental impact, associated with 64.77% total embodied energy and 31.38% embodied materials consumption, contributing to more than 50% of the life cycle impact in almost all impact categories, although lead used in the perovskite dye only contributes to about 1.14% of the human toxicity potential. A comparison of perovskite solar cells with commercial silicon and cadmium-tellurium solar cells reveals that perovskite solar cells could be a promising alternative technology for future large-scale industrial applications. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Waiting for Disasters: A Risk Reduction Assessment of Technological Disasters

    Science.gov (United States)

    Rovins, Jane; Winningham, Sam

    2010-05-01

    This session provides a risk reduction/mitigation assessment of natural hazards causation of technological disasters and possible solution. People use technology in an attempt to not only control their environment but nature itself in order to make them feel safe and productive. Most strategies for managing hazards followed a traditional planning model i.e. study the problem, identify and implement a solution, and move on to the next problem. This approach is often viewed as static model and risk reduction is more of an upward, positive, linear trend. However, technological disasters do not allow risk reduction action to neatly fit this upward, positive, linear trend with actual or potential threats to the environment and society. There are different types of technological disasters, including industrial accidents; pipeline ruptures; accidents at power, water and heat supply systems and other lines of communication; sudden collapse of buildings and mines; air crashes; shipwrecks; automobile and railway accidents to name a few. Natural factors can play an essential role in triggering or magnifying technological disasters. They can result from the direct destruction of given technical objects by a hazardous natural process such as the destruction of an atomic power plant or chemical plant due to an earthquake. Other examples would include the destruction of communications or infrastructure systems by heavy snowfalls, strong winds, avalanches. Events in the past ten years clearly demonstrate that natural disasters and the technological disasters that accompany them are not problems that can be solved in isolation and risk reduction can play an important part. Risk reduction was designed to head off the continuing rising financial and structural tolls from disasters. All Hazard Risk Reduction planning was supposed to include not only natural, but technological, and human-made disasters as well. The subsequent disaster risk reduction (DRR) indicators were to provide the

  7. Offline Chinese handwriting recognition :an assessment of current technology

    Institute of Scientific and Technical Information of China (English)

    Sargur N.Srihari; Xuanshen Yang; Gregory R.Ball

    2007-01-01

    Offline Chinese handwriting recognition (OCHR)is a typically difficult pattern recognition problem.Many authors have presented various approaches to recognizing its different aspects.We present a survey and an assessment of relevant papers appearing in recent publications of relevant conferences and journals,including those appearing in ICDAR,SDIUT,IWFHR,ICPR,PAMI,PR,PRL,SPIE-DRR,and IJDAR.The methods are assessed in the sense that we document their technical approaches,strengths,and weaknesses,as well as the data sets on which they were reportedly tested and on which results were generated.We also identify a list of technology gaps with respect to Chinese handwriting recognition and identify technical approaches that show promise in these areas as well as identify the leading researchers for the applicable topics,discussing difficulties associated with any given approach.

  8. Health Technology Assessment of Magnetic Resonance Imaging in Shanxi Province

    Institute of Scientific and Technical Information of China (English)

    Yueze Liu; Jianwen Cao; Zuxun Lu

    2004-01-01

    Assess the current status of MRI in Shanxi province by health technology assessment method to provide suggestion and guidelines for future government decisions on the procurement and installation of new high-tech medical equipments. All of the 21 hospitals installed MRIs were surveyed.The results showed that 1 ) Diffusion of MRI is consistent with the economic development in different regional districts and hospital levels in Shanxi province. 2) There are better monetary returns of MRI in higher level hospitals than lower level hospitals. 3) Most MRIs in Shanxi province had been running at a loss, and the first class tertiary level hospitals had been making profit from providing MRI services to patients. 4) Better cost-benefit accorded with higher hospital level, more patients serviced etc. 5 ) The biggest investment risk is the initial purchase and installation of MRI. 6) Positive rates and veracity of MRI diagnosis were higher. 7) MRI is a safe equipment.

  9. Simulation Technology Laboratory Building 970 hazards assessment document

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.L.; Starr, M.D.

    1994-11-01

    The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Simulation Technology Laboratory, Building 970. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distances at which a postulated facility event will produce consequences exceeding the ERPG-2 and Early Severe Health Effects thresholds are 78 and 46 meters, respectively. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 100 meters.

  10. Radiation safety assessment and development of environmental radiation monitoring technology

    CERN Document Server

    Choi, B H; Kim, S G

    2002-01-01

    The Periodic Safety Review(PSR) of the existing nuclear power plants is required every ten years according to the recently revised atomic energy acts. The PSR of Kori unit 1 and Wolsong unit 1 that have been operating more than ten years is ongoing to comply the regulations. This research project started to develop the techniques necessary for the PSR. The project developed the following four techniques at the first stage for the environmental assessment of the existing plants. 1) Establishment of the assessment technology for contamination and accumulation trends of radionuclides, 2) alarm point setting of environmental radiation monitoring system, 3) Development of Radiation Safety Evaluation Factor for Korean NPP, and 4) the evaluation of radiation monitoring system performance and set-up of alarm/warn set point. A dynamic compartment model to derive a relationship between the release rates of gas phase radionuclides and the concentrations in the environmental samples. The model was validated by comparing ...

  11. Oracle数据库性能优化技术研究%Oracle Database Performance Optimization Technology

    Institute of Scientific and Technical Information of China (English)

    宋佳艳

    2013-01-01

    Oracle Database Application broad demands more attention to the optimization of its performance in order to improve the operating efficiency of the Oracle database, to maximize their application value. Articles from the Oracle database perfor-mance metrics, integrated Oracle database performance optimization proposed technical measures can provide reference for the relevant database.%Oracle数据库应用的广泛性要求更加重视其性能的优化,以提高Oracle数据库的运行效率,发挥其最大应用价值。文章根据Oracle数据库性能评价指标,综合性的提出了Oracle数据库性能优化技术措施,可为相关数据库人员提供参考。

  12. Literature consistency of bioinformatics sequence databases is effective for assessing record quality.

    Science.gov (United States)

    Bouadjenek, Mohamed Reda; Verspoor, Karin; Zobel, Justin

    2017-01-01

    Bioinformatics sequence databases such as Genbank or UniProt contain hundreds of millions of records of genomic data. These records are derived from direct submissions from individual laboratories, as well as from bulk submissions from large-scale sequencing centres; their diversity and scale means that they suffer from a range of data quality issues including errors, discrepancies, redundancies, ambiguities, incompleteness and inconsistencies with the published literature. In this work, we seek to investigate and analyze the data quality of sequence databases from the perspective of a curator, who must detect anomalous and suspicious records. Specifically, we emphasize the detection of inconsistent records with respect to the literature. Focusing on GenBank, we propose a set of 24 quality indicators, which are based on treating a record as a query into the published literature, and then use query quality predictors. We then carry out an analysis that shows that the proposed quality indicators and the quality of the records have a mutual relationship, in which one depends on the other. We propose to represent record-literature consistency as a vector of these quality indicators. By reducing the dimensionality of this representation for visualization purposes using principal component analysis, we show that records which have been reported as inconsistent with the literature fall roughly in the same area, and therefore share similar characteristics. By manually analyzing records not previously known to be erroneous that fall in the same area than records know to be inconsistent, we show that one record out of four is inconsistent with respect to the literature. This high density of inconsistent record opens the way towards the development of automatic methods for the detection of faulty records. We conclude that literature inconsistency is a meaningful strategy for identifying suspicious records. https://github.com/rbouadjenek/DQBioinformatics.

  13. Fecal Microbiota Therapy for Clostridium difficile Infection: A Health Technology Assessment.

    Science.gov (United States)

    2016-01-01

    Fecal microbiota therapy is increasingly being used to treat patients with Clostridium difficile infection. This health technology assessment primarily evaluated the effectiveness and cost-effectiveness of fecal microbiota therapy compared with the usual treatment (antibiotic therapy). We performed a literature search using Ovid MEDLINE, Embase, Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, CRD Health Technology Assessment Database, Cochrane Central Register of Controlled Trials, and NHS Economic Evaluation Database. For the economic review, we applied economic filters to these search results. We also searched the websites of agencies for other health technology assessments. We conducted a meta-analysis to analyze effectiveness. The quality of the body of evidence for each outcome was examined according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group criteria. Using a step-wise, structural methodology, we determined the overall quality to be high, moderate, low, or very low. We used a survey to examine physicians' perception of patients' lived experience, and a modified grounded theory method to analyze information from the survey. For the review of clinical effectiveness, 16 of 1,173 citations met the inclusion criteria. A meta-analysis of two randomized controlled trials found that fecal microbiota therapy significantly improved diarrhea associated with recurrent C. difficile infection versus treatment with vancomycin (relative risk 3.24, 95% confidence interval [CI] 1.85-5.68) (GRADE: moderate). While fecal microbiota therapy is not associated with a significant decrease in mortality compared with antibiotic therapy (relative risk 0.69, 95% CI 0.14-3.39) (GRADE: low), it is associated with a significant increase in adverse events (e.g., short-term diarrhea, relative risk 30.76, 95% CI 4.46-212.44; abdominal cramping, relative risk 14.81, 95% CI 2.07-105.97) (GRADE: low). For

  14. COMPUTER-AIDED ENVIRONMENTAL RISK ASSESSMENT OF POTATO CULTIVATION TECHNOLOGY USING OPENLCA SOFTWARE

    Directory of Open Access Journals (Sweden)

    Jerzy Ryszard Grudziński

    2016-11-01

    Full Text Available The article discusses the environmental impact of the tillage processes of potato production. The analysis was performed using a simplified LCA ( Life Cycle Assessment software. Depending on the purpose and the level of detail of the process analysis, the LCA technique of environmental management may require computer assistance. Even then, carrying it out is very complex, long and costly. The aim of the study was to explore the possibility of the use of open source software for a simplified life-cycle analysis of potato with LCA method. There was selected OpenLCA – GreenDelta TC GmbH, v.1.3.1 software. The diagrams of unit process streams and energy inputs incurred on the individual processes of cultivation were designed based on literature. There were compared environmental hazards of the two systems of potato cultivation: with using the plough and the simplified one in terms of atmospheric pollution with chemicals emitted by the engines of agricultural tractors in the course of the subsequent agricultural procedures. The study results confirmed the suitability of the software for the initial evaluation (screening of environmental hazards using LCA method. The software is compatible with both the open source databases and commercial databases. Environmental impacts of cultivation technologies are presented in a form of a graphic illustration of pollution emissions. Also, the problems hindering the use of the software are indicated.

  15. A scientific assessment of a new technology orbital telescope

    Science.gov (United States)

    1995-01-01

    As part of a program designed to test the Alpha chemical laser weapons system in space, the Ballistic Missile Defense Organization (BMDO) developed components of an agile, lightweight, 4-meter telescope, equipped with an advanced active-optics system. BMDO had proposed to make space available in the telescope's focal plane for instrumentation optimized for scientific applications in astrophysics and planetary astronomy for a potential flight mission. Such a flight mission could be undertaken if new or additional sponsorship can be found. Despite this uncertainty, BMDO requested assistance in defining the instrumentation and other design aspects necessary to enhance the scientific value of a pointing and tracking mission. In response to this request, the Space Studies Board established the Task Group on BMDO New Technology Orbital Observatory (TGBNTOO) and charged it to: (1) provide instrumentation, data management, and science-operations advice to BMDO to optimize the scientific value of a 4-meter mission; and (2) support a space studies board assessment of the relative scientific merit of the program. This report deals with the first of these tasks, assisting the Advanced Technology Demonstrator's (ATD's) program scientific potential. Given the potential scientific aspects of the 4-meter telescope, this project is referred to as the New Technology Orbital Telescope (NTOT), or as the ATD/NTOT, to emphasize its dual-use character. The task group's basic conclusion is that the ATD/NTOT mission does have the potential for contributing in a major way to astronomical goals.

  16. Why ethics should be part of health technology assessment.

    Science.gov (United States)

    Hofmann, Bjørn Morten

    2008-01-01

    From the heydays of HTA in the 1970s, it has been argued that ethics should be a part of HTA. Despite more than 30 years with repeated intentions, only few HTA reports include ethical analysis, and there is little agreement on methods for integrating ethics. This poses the question of why it is so important to integrate ethics in HTA? The article analyzes ten arguments for making ethics part of HTA. The validity of the arguments depend on what we mean by "integrating," "ethics," and "HTA." Some of the counterarguments explain why it has taken so long to integrate ethics in HTA and why there are so many ethical approaches. Nevertheless, some of the arguments for making ethics part of HTA appear to be compelling. Health care is a moral endeavor, and the vast potential of technology poses complex moral challenges. A thorough assessment of technology would include reflection on these moral aspects. Ethics provides such a moral reflection. Health technology is a way to improve the life of human individuals. This involves questions of what "the good life" is, and hence ethical issues. Trying to ignore such questions may inflict with the moral foundation of health care: to help people. Additionally, HTA is an evaluation, and as such also a reflection on values. Hence, there is a profound affinity between HTA and ethics. Accordingly, ethics cannot be "integrated" in HTA as ethics is already a constitutive part of HTA. However, ethics can be acknowledged and emphasized.

  17. Technology-Enhanced Formative Assessment: A Research-Based Pedagogy for Teaching Science with Classroom Response Technology

    Science.gov (United States)

    Beatty, Ian D.; Gerace, William J.

    2009-01-01

    "Classroom response systems" (CRSs) are a promising instructional technology, but most literature on CRS use fails to distinguish between technology and pedagogy, to define and justify a pedagogical perspective, or to discriminate between pedagogies. "Technology-enhanced formative assessment" (TEFA) is our pedagogy for CRS-based science…

  18. Evaluation of Policy and Research Interventions in Science and Technology: Consequence Assessment of Regulatory and Technology Transfer Programs

    Science.gov (United States)

    Dias, Mary Beatrice

    2011-01-01

    This research contributes to efforts in assessment studies related to science and technology interventions. The work presented in this thesis focuses on understanding the effects of policies that influence science and technology interventions, and determining the impact of science and technology interventions themselves. Chapter 1 explores how…

  19. A short history of health technology assessment in Germany.

    Science.gov (United States)

    Perleth, Matthias; Gibis, Bernhard; Göhlen, Britta

    2009-07-01

    To provide an overview of the development of health technology assessment (HTA) in Germany since the 1990s. Analysis of key documents (e.g. literature, laws, and other official documentation) and personal experiences. Health technology assessment (HTA) entered the political agenda in Germany only in the mid-1990s, basically as the result of a top-down approach toward more efficiency in health care, but with a strong impetus of an evidence-based medicine movement. Accordingly, HTA became part of several healthcare reform laws since 1997, which led to the establishment of the Federal Joint Committee (G-BA) and the Institute for Quality and Efficiency in Health Care (IQWiG) in 2004. This tandem construction aims at using evidence in decision-making processes for coverage and other decisions. These developments have led to a considerable impact of HTA in Germany. In addition, a broad spectrum of activities at universities and in other organizations, such as the German Institute for Medical Documentation and Information (DIMDI), can be observed that contribute to both teaching and research in HTA. German researchers in the field of HTA are actively involved in international projects, such as EUNetHTA, and contribute to scientific conferences and journals.

  20. Meat Quality Assessment by Electronic Nose (Machine Olfaction Technology

    Directory of Open Access Journals (Sweden)

    Sundar Balasubramanian

    2009-07-01

    Full Text Available Over the last twenty years, newly developed chemical sensor systems (so called “electronic noses” have made odor analyses possible. These systems involve various types of electronic chemical gas sensors with partial specificity, as well as suitable statistical methods enabling the recognition of complex odors. As commercial instruments have become available, a substantial increase in research into the application of electronic noses in the evaluation of volatile compounds in food, cosmetic and other items of everyday life is observed. At present, the commercial gas sensor technologies comprise metal oxide semiconductors, metal oxide semiconductor field effect transistors, organic conducting polymers, and piezoelectric crystal sensors. Further sensors based on fibreoptic, electrochemical and bi-metal principles are still in the developmental stage. Statistical analysis techniques range from simple graphical evaluation to multivariate analysis such as artificial neural network and radial basis function. The introduction of electronic noses into the area of food is envisaged for quality control, process monitoring, freshness evaluation, shelf-life investigation and authenticity assessment. Considerable work has already been carried out on meat, grains, coffee, mushrooms, cheese, sugar, fish, beer and other beverages, as well as on the odor quality evaluation of food packaging material. This paper describes the applications of these systems for meat quality assessment, where fast detection methods are essential for appropriate product management. The results suggest the possibility of using this new technology in meat handling.

  1. Benefits of using a spectral hindcast database for wave power extraction assessment

    OpenAIRE

    Maisondieu, Christophe; LE BOULLUEC, Marc

    2016-01-01

    When considering deployment of wave energy converters at a given site, it is of prime importance from both a technical and an economical point of view to accurately assess the total yearly energy that can be extracted by the given device. Especially, to be considered is the assessment of the efficiency of the device over the widest span of the sea-states spectral bandwidth. Hence, the aim of this study is to assess the biases and errors introduced on extracted power classically computed us...

  2. 计算机数据库入侵检测技术分析%Computer Database Analysis of Intrusion Detection Technology

    Institute of Scientific and Technical Information of China (English)

    连志强

    2013-01-01

    The computer database system is directly related to the corporate and personal privacy protection and social stability and national security,so the computer database system security work must be done bit.Although the firewall has spread to a computer database system, but the inherent flaws firewall capability is still not completely against hackers,thus deepen the computer database intrusion detection technology without delay.This paper mainly focus on computer database intrusion detection technology start discussion,in order to improve our computer database system security.%计算机数据库系统直接关乎企业与个人的隐私保护及社会稳定与国家安全,因此计算机数据库系统的安全保障工作必须做到位。尽管防火墙目前已普及到计算机数据库系统,但防火墙自身固有的缺陷尚没有能力完全抵御黑客的入侵,因此深化对计算机数据库入侵检测技术的研究刻不容缓。本文主要围绕计算机数据库入侵检测技术展开论述,以期提高我国计算机数据库系统的安全性。

  3. Assessment of imputation methods using varying ecological information to fill the gaps in a tree functional trait database

    Science.gov (United States)

    Poyatos, Rafael; Sus, Oliver; Vilà-Cabrera, Albert; Vayreda, Jordi; Badiella, Llorenç; Mencuccini, Maurizio; Martínez-Vilalta, Jordi

    2016-04-01

    Plant functional traits are increasingly being used in ecosystem ecology thanks to the growing availability of large ecological databases. However, these databases usually contain a large fraction of missing data because measuring plant functional traits systematically is labour-intensive and because most databases are compilations of datasets with different sampling designs. As a result, within a given database, there is an inevitable variability in the number of traits available for each data entry and/or the species coverage in a given geographical area. The presence of missing data may severely bias trait-based analyses, such as the quantification of trait covariation or trait-environment relationships and may hamper efforts towards trait-based modelling of ecosystem biogeochemical cycles. Several data imputation (i.e. gap-filling) methods have been recently tested on compiled functional trait databases, but the performance of imputation methods applied to a functional trait database with a regular spatial sampling has not been thoroughly studied. Here, we assess the effects of data imputation on five tree functional traits (leaf biomass to sapwood area ratio, foliar nitrogen, maximum height, specific leaf area and wood density) in the Ecological and Forest Inventory of Catalonia, an extensive spatial database (covering 31900 km2). We tested the performance of species mean imputation, single imputation by the k-nearest neighbors algorithm (kNN) and a multiple imputation method, Multivariate Imputation with Chained Equations (MICE) at different levels of missing data (10%, 30%, 50%, and 80%). We also assessed the changes in imputation performance when additional predictors (species identity, climate, forest structure, spatial structure) were added in kNN and MICE imputations. We evaluated the imputed datasets using a battery of indexes describing departure from the complete dataset in trait distribution, in the mean prediction error, in the correlation matrix

  4. Explicit Diversity Index (EDI): a novel measure for assessing the diversity of compound databases.

    Science.gov (United States)

    Papp, Akos; Gulyas-Forró, Anna; Gulyas, Zsolt; Dorman, György; Urge, Laszló; Darvas, Ferenc

    2006-01-01

    A novel diversity assessment method, the Explicit Diversity Index (EDI), is introduced for druglike molecules. EDI combines structural and synthesis-related dissimilarity values and expresses them as a single number. As an easily interpretable measure, it facilitates the decision making in the design of combinatorial libraries, and it might assist in the comparison of compound sets provided by different manufacturers. Because of its rapid calculation algorithm, EDI enables the diversity assessment of in-house or commercial compound collections.

  5. The COTECH knowledge database: assessment of critical factors in micro moulding

    DEFF Research Database (Denmark)

    Tosello, Guido; Griffiths, C.A.; Hansen, Hans Nørgaard;

    2012-01-01

    , and to propose innovative solutions of serial production control to ensure effective high quality industrial micro manufacture. Specific research work has been undertaken during the COTECH project in order to monitor, characterize, analyse, and simulate the μlM process. Relations between the fundamental process......The European Large Scale Collaboration Project "COTECH" (Converging Technologies for Micro ystem Manufacturing, 2008-2012 has as one of its main objectives to improve the understanding of the micro injection moulding (μlM) process to enable its implementation in large-scale production conditions...... input parameters and process quality factors and material characteristics have been established. To meet the goal of high accuracy processing and manufacturing during the whole process chain, different means of optimization technologies based on the design of experiments method have been employed...

  6. The Database Technology of Digital Library Information Organization%浅谈数字图书馆信息组织的数据库技术

    Institute of Scientific and Technical Information of China (English)

    刘芬

    2011-01-01

    Digital library is no longer a new concept,has undergone a considerable period of development.Within this period,construction of digital libraries in many areas has been greatly improved,which is a concept and ideas,convenient service is one of the important elements.In this paper, the history of digital library development started elaborated,followed by combining the characteristics of digital libraries,emphasizing the application of database technology on library organ, ization and management of information need,and finally focused on the data warehouse,relational database,multimedia database,object-oriented database technology, database technology and other unstructured information organization in digital library applications.%数字图书馆已经不再是一个崭新的概念,经历了相当一段时间的发展。在这一段时期之内,数字图书馆的建设在很多方面已经有了很大改进,这是一种概念和思想,便捷的服务是其中一个重要的组成要素。本文首先对数字图书馆的发展历史展开了阐述,其次结合数字图书馆的特点,强调了应用数据库技术对图书馆信息进行组织管理的必要性,最后着重探讨了数据仓库技术、关系数据库、多媒体数据库、面向对象的数据库技术、非结构化数据库技术等在数字图书馆信息组织的应用。

  7. Construction of a bibliographic information database and development of retrieval system for research reports in nuclear science and technology (II)

    Energy Technology Data Exchange (ETDEWEB)

    Han, Duk Haeng; Kim, Tae Whan; Choi, Kwang; Yoo, An Na; Keum, Jong Yong; Kim, In Kwon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-05-01

    The major goal of this project is to construct a bibliographic information database in nuclear engineering and to develop a prototype retrieval system. To give an easy access to microfiche research report, this project has accomplished the construction of microfiche research reports database and the development of retrieval system. The results of the project are as follows; 1. Microfiche research reports database was constructed by downloading from DOE Energy, NTIS, INIS. 2. The retrieval system was developed in host and web version using access point such as title, abstracts, keyword, report number. 6 tabs., 8 figs., 11 refs. (Author) .new.

  8. Remote Database Technology Study About Visual Basic%关于Visual Basic中远程数据库技术的探讨

    Institute of Scientific and Technical Information of China (English)

    彭盛宏

    2011-01-01

    Visual Basic technology is a very extensive and easy to use and mastery of the programming language,especially in database applications with a powerful,computer language,in this paper, I have practical experience in the teaching process,a brief definition of the Visual Basic database and VB to access SQL Server database commonly used methods,and through a simple example to illustrate the remote database technology in Visual Basic specific application.%Visual Basic技术是一种使用非常广泛而且易与掌握的编程语言,尤其是在数据库应用方面具有强大的功能,本文结合本人在计算机语言教学过程中的实际经验,简要介绍Visual Basic数据库的定义及VB访问SQL Server数据库的常用方法,并通过简单的实例来阐述Visual Basic中远程数据库技术的具体应用。

  9. The Design and Realization of Agricultural Technology Information Database%农业知识库的设计与实现

    Institute of Scientific and Technical Information of China (English)

    金钟明; 李永可; 李悦

    2014-01-01

    通过对数据库技术及农业信息分类技术的研究,设计农业知识数据库结构,并开发农业知识采集系统,为农业知识采集提供录入接口。农业知识库的设计为农业知识检索系统开发奠定基础。实际应用证明,该知识库为农业信息检索系统开发提供了很好的支持。%Through the research on database technology and techniques for classification of agricultural information, designing the structure of agricultural technology database and developing the agricultural information acquisition system, provides the in⁃put interface for the agricultural knowledge acquisition. The design of agricultural database building a foundation for the develop⁃ing of agricultural knowledge retrieval system. The practical application proves that, the agricultural knowledge database provid⁃ing a good support for the development of agricultural information retrieval system.

  10. Technology solutions of computer network security database%计算机网络数据库安全技术方案

    Institute of Scientific and Technical Information of China (English)

    伍军

    2015-01-01

    With the development of computer ne twork database, the security threats facing more and more complex, and therefore, the network database security technology must continue to advance with the times. Can take three authentication, database encryption, active tracking and monitoring technology, from passive defense initiative to track both directions and evolving in response to the increasing complexity of the situation, to maximize network database to ensure the integrity and consistency of data sex.%随着时代的发展,计算机网络数据库面临的安全威胁越来越多,越来越复杂,因此,网络数据库安全防护技术必须不断与时俱进。可采取三级身份认证、数据库加密、主动追踪和监测技术,从被动防御和主动追踪两个方向不断发展,以应对越来越复杂的局面,最大程度地保证网络数据库数据信息的完整性和一致性。

  11. Technology and Economic Assessment of Innovative Field Drainage Technologies in Denmark

    DEFF Research Database (Denmark)

    Gachango, Florence Gathoni

    Intensive agricultural production in most parts of the world especially in the more developed countries continues to mount pressure on water resources thereby threatening the quality of life in the aquatic ecosystems. With stringent standards such as those stipulated in the European Union Water...... proposed as appropriate solutions to this problem in the Danish context. The feasibility of these technologies with regards to their cost-effectiveness in nutrient mitigation, farmers’ adoption behavior, and environmental policy implementation is assessed in this thesis. The thesis comprises of four papers...... based on survey and case-farms data and utilizes a mix of quantitative and qualitative methods to investigate: i) the farmers’ perception of water quality and their adoption behavior with respect to voluntary nutrient reduction technologies, ii) the farmers willingness to adopt constructed wetland...

  12. Virtues, ecological momentary assessment/intervention and smartphone technology.

    Science.gov (United States)

    Runyan, Jason D; Steinke, Ellen G

    2015-01-01

    Virtues, broadly understood as stable and robust dispositions for certain responses across morally relevant situations, have been a growing topic of interest in psychology. A central topic of discussion has been whether studies showing that situations can strongly influence our responses provide evidence against the existence of virtues (as a kind of stable and robust disposition). In this review, we examine reasons for thinking that the prevailing methods for examining situational influences are limited in their ability to test dispositional stability and robustness; or, then, whether virtues exist. We make the case that these limitations can be addressed by aggregating repeated, cross-situational assessments of environmental, psychological and physiological variables within everyday life-a form of assessment often called ecological momentary assessment (EMA, or experience sampling). We, then, examine how advances in smartphone application (app) technology, and their mass adoption, make these mobile devices an unprecedented vehicle for EMA and, thus, the psychological study of virtue. We, additionally, examine how smartphones might be used for virtue development by promoting changes in thought and behavior within daily life; a technique often called ecological momentary intervention (EMI). While EMA/I have become widely employed since the 1980s for the purposes of understanding and promoting change amongst clinical populations, few EMA/I studies have been devoted to understanding or promoting virtues within non-clinical populations. Further, most EMA/I studies have relied on journaling, PDAs, phone calls and/or text messaging systems. We explore how smartphone app technology provides a means of making EMA a more robust psychological method, EMI a more robust way of promoting positive change, and, as a result, opens up new possibilities for studying and promoting virtues.

  13. Virtues, Ecological Momentary Assessment/Intervention and Smartphone Technology

    Directory of Open Access Journals (Sweden)

    Jason D Runyan

    2015-05-01

    Full Text Available Virtues, generally understood as stable and robust dispositions for certain responses across morally relevant situations, have been a growing topic of interest in psychology. A central topic of discussion has been whether the existence of virtues (as a kind of stable and robust disposition is called into question by studies showing that, to a significant degree, an individual’s situation can influence their responses. In this review, we examine reasons for thinking that these kinds of situational studies are limited in their ability to test dispositional stability and robustness; or, then, whether virtues exist. We make the case that these limitations can be addressed by aggregating repeated, cross-situational assessments of environmental, psychological and physiological variables within everyday life—a form of assessment often called ecological momentary assessment (EMA, or experience sampling. We, then, examine how advances in smartphone application (app technology, and their mass adoption, make these mobile devices an unprecedented vehicle for EMA and, thus, the psychological study of virtue. We, additionally, examine how smartphones might be used for virtue development by promoting changes in thought and behavior within daily life; a technique often called ecological momentary intervention (EMI. While EMA/I have become widely employed since the 1980s for the purposes of understanding and promoting change amongst clinical populations, few EMA/I studies have been devoted to understanding or promoting virtues within non-clinical populations. Further, most EMA/I studies have relied on journaling, PDAs, phone calls and/or text messaging systems. We explore how smartphone app technology provides a means of making EMA a more robust psychological method, EMI a more robust way of promoting positive change, and, as a result, opens up new possibilities for studying and promoting virtues.

  14. Integration of an Evidence Base into a Probabilistic Risk Assessment Model. The Integrated Medical Model Database: An Organized Evidence Base for Assessing In-Flight Crew Health Risk and System Design

    Science.gov (United States)

    Saile, Lynn; Lopez, Vilma; Bickham, Grandin; FreiredeCarvalho, Mary; Kerstman, Eric; Byrne, Vicky; Butler, Douglas; Myers, Jerry; Walton, Marlei

    2011-01-01

    This slide presentation reviews the Integrated Medical Model (IMM) database, which is an organized evidence base for assessing in-flight crew health risk. The database is a relational database accessible to many people. The database quantifies the model inputs by a ranking based on the highest value of the data as Level of Evidence (LOE) and the quality of evidence (QOE) score that provides an assessment of the evidence base for each medical condition. The IMM evidence base has already been able to provide invaluable information for designers, and for other uses.

  15. Assessment of the neutron cross section database for mercury for the ORNL spallation source

    Energy Technology Data Exchange (ETDEWEB)

    Leal, L.C.; Spencer, R.R.; Ingersoll, D.T.; Gabriel, T.A. [Oak Ridge National Lab., TN (United States)

    1996-06-01

    Neutron source generation based on a high energy particle accelerator has been considered as an alternative to the canceled Advanced Neutron Source project at Oak Ridge National Laboratory. The proposed technique consists of a spallation neutron source in which neutrons are produced via the interaction of high-energy charged particles in a heavy metal target. Preliminary studies indicate that liquid mercury bombarded with GeV protons provides an excellent neutron source. Accordingly, a survey has been made of the available neutron cross-section data. Since it is expected that spectral modifiers, specifically moderators, will also be incorporated into the source design, the survey included thermal energy, resonance region, and high energy data. It was found that data of individual isotopes were almost non-existent and that the only evaluation found for the natural element had regions of missing data or discrepant data. Therefore, it appears that to achieve the desired degree of accuracy in the spallation source design it is necessary to re-evaluate the mercury database including making new measurements. During the presentation the currently available data will be presented and experiments proposed which can lead to design quality cross sections.

  16. Driving risk assessment using near-crash database through data mining of tree-based model.

    Science.gov (United States)

    Wang, Jianqiang; Zheng, Yang; Li, Xiaofei; Yu, Chenfei; Kodaka, Kenji; Li, Keqiang

    2015-11-01

    This paper considers a comprehensive naturalistic driving experiment to collect driving data under potential threats on actual Chinese roads. Using acquired real-world naturalistic driving data, a near-crash database is built, which contains vehicle status, potential crash objects, driving environment and road types, weather condition, and driver information and actions. The aims of this study are summarized into two aspects: (1) to cluster different driving-risk levels involved in near-crashes, and (2) to unveil the factors that greatly influence the driving-risk level. A novel method to quantify the driving-risk level of a near-crash scenario is proposed by clustering the braking process characteristics, namely maximum deceleration, average deceleration, and percentage reduction in vehicle kinetic energy. A classification and regression tree (CART) is employed to unveil the relationship among driving risk, driver/vehicle characteristics, and road environment. The results indicate that the velocity when braking, triggering factors, potential object type, and potential crash type exerted the greatest influence on the driving-risk levels in near-crashes.

  17. Cost, Time, and Risk Assessment of Different Wave Energy Converter Technology Development Trajectories: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Jochem W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Laird, Daniel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Costello, Ronan [Wave Venture; Roberts, Jesse [Sandia National Laboratories; Bull, Diana [Sandia National Laboratories; Babarit, Aurelien [Ecole Centrale de Nantes; Nielsen, Kim [Ramboll; Ferreira, Claudio Bittencourt [DNV-GL; Kennedy, Ben [Wave Venture

    2017-09-14

    This paper presents a comparative assessment of three fundamentally different wave energy converter technology development trajectories. The three technology development trajectories are expressed and visualised as a function of technology readiness levels and technology performance levels. The assessment shows that development trajectories that initially prioritize technology readiness over technology performance are likely to require twice the development time, consume a threefold of the development cost, and are prone to a risk of technical or commercial failure of one order of magnitude higher than those development trajectories that initially prioritize technology performance over technology readiness.

  18. Assessment vs. appraisal of ethical aspects of health technology assessment: can the distinction be upheld?

    Science.gov (United States)

    Sandman, Lars; Heintz, Emelie

    2014-01-01

    An essential component of health technology assessment (HTA) is the assessment of ethical aspects. In some healthcare contexts, tasks are strictly relegated to different expert groups: the HTA-agencies are limited to assessment of the technology and other actors within the health care sector are responsible for appraisal and recommendations. Ethical aspects of health technologies are considered with reference to values or norms in such a way that may be prescriptive, or offer guidance as to how to act or relate to the issue in question. Given this internal prescriptivity, the distinction between assessment and appraisal seems difficult to uphold, unless the scrutiny stops short of a full ethical analysis of the technology. In the present article we analyse the distinction between assessment and appraisal, using as an example ethical aspects of implementation of GPS-bracelets for people with dementia. It is concluded that for HTA-agencies with a strictly delineated assessment role, the question of how to deal with the internal prescriptivity of ethics may be confusing. A full ethical analysis might result in a definite conclusion as to whether the technology in question is ethically acceptable or not, thereby limiting choices for decision-makers, who are required to uphold certain ethical values and norms. At the same time, depending on the exact nature of such a conclusion, different action strategies can be supported. A positive appraisal within HTA could result in a decision on mandatory implementation, or funding of the technology, thereby making it available to patients, or decisions to allow and even encourage the use of the technology (even if someone else will have to fund it). A neutral appraisal, giving no definite answer as to whether implementation is recommended or not, could result in a laissez-faire attitude towards the technology. A negative appraisal could result in a decision to discourage or even prohibit implementation. This paper presents an

  19. Assessment vs. appraisal of ethical aspects of health technology assessment: can the distinction be upheld?

    Directory of Open Access Journals (Sweden)

    Sandman, Lars

    2014-11-01

    Full Text Available [english] An essential component of health technology assessment (HTA is the assessment of ethical aspects. In some healthcare contexts, tasks are strictly relegated to different expert groups: the HTA-agencies are limited to assessment of the technology and other actors within the health care sector are responsible for appraisal and recommendations. Ethical aspects of health technologies are considered with reference to values or norms in such a way that may be prescriptive, or offer guidance as to how to act or relate to the issue in question. Given this internal prescriptivity, the distinction between assessment and appraisal seems difficult to uphold, unless the scrutiny stops short of a full ethical analysis of the technology. In the present article we analyse the distinction between assessment and appraisal, using as an example ethical aspects of implementation of GPS-bracelets for people with dementia. It is concluded that for HTA-agencies with a strictly delineated assessment role, the question of how to deal with the internal prescriptivity of ethics may be confusing. A full ethical analysis might result in a definite conclusion as to whether the technology in question is ethically acceptable or not, thereby limiting choices for decision-makers, who are required to uphold certain ethical values and norms. At the same time, depending on the exact nature of such a conclusion, different action strategies can be supported. A positive appraisal within HTA could result in a decision on implementation, or of the technology, thereby making it available to patients, or decisions to and even the use of the technology (even if someone else will have to fund it. A neutral appraisal, giving no definite answer as to whether implementation is recommended or not, could result in a towards the technology. A negative appraisal could result in a decision to or even implementation. This paper presents an overview of the implications of different outcomes

  20. Preoperative airway assessment - experience gained from a multicentre cluster randomised trial and the Danish Anaesthesia Database

    DEFF Research Database (Denmark)

    Nørskov, Anders Kehlet

    2016-01-01

    , using state of the art methodology, in order to test the clinical impact of using the SARI for preoperative airway assessment compared with a clinical judgement based on usual practice for airway assessment. Finally, to test if implementation of the SARI would reduce the proportion of unanticipated...... to the DIFFICAIR trial described in Paper 4. The trial was designed to randomise anaesthesia department to either thorough education in, and subsequent use of the SARI for preoperative airway assessment or to continue usual care. Registration of the SARI in DAD was made mandatory in SARI departments and impossible...... baseline values of the primary outcome used in the DIFFICAIR trial. Paper 1 revealed that 1.86% of all patients who were intubated, but not planned for advanced intubation techniques (e.g. video laryngoscopy), were unanticipated difficult to intubate. However, 75 to 93% of all difficult intubations were...

  1. Assessment of radionuclide databases in CAP88 mainframe version 1.0 and Windows-based version 3.0.

    Science.gov (United States)

    LaBone, Elizabeth D; Farfán, Eduardo B; Lee, Patricia L; Jannik, G Timothy; Donnelly, Elizabeth H; Foley, Trevor Q

    2009-09-01

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several U.S. Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants regulations. CAP88 Mainframe, referred to as version 1.0 on the U.S. Environmental Protection Agency Web site (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose, and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, 35 radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, 122 radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  2. ASSESSMENT OF RADIONUCLIDES DATABASES IN CAP88 MAINFRAME VERSION 1.0 AND WINDOWS-BASED VERSION 3.0

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.; Lee, P.; Jannik, T.; Donnelly, E.

    2008-09-16

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations. CAP88 Mainframe, referred to as Version 1.0 on the Environmental Protection Agency (EPA) website (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based Version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection (ICRP) Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, thirty-five radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, one hundred and twenty-two radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  3. Open Rotor Tone Shielding Methods for System Noise Assessments Using Multiple Databases

    Science.gov (United States)

    Bahr, Christopher J.; Thomas, Russell H.; Lopes, Leonard V.; Burley, Casey L.; Van Zante, Dale E.

    2014-01-01

    Advanced aircraft designs such as the hybrid wing body, in conjunction with open rotor engines, may allow for significant improvements in the environmental impact of aviation. System noise assessments allow for the prediction of the aircraft noise of such designs while they are still in the conceptual phase. Due to significant requirements of computational methods, these predictions still rely on experimental data to account for the interaction of the open rotor tones with the hybrid wing body airframe. Recently, multiple aircraft system noise assessments have been conducted for hybrid wing body designs with open rotor engines. These assessments utilized measured benchmark data from a Propulsion Airframe Aeroacoustic interaction effects test. The measured data demonstrated airframe shielding of open rotor tonal and broadband noise with legacy F7/A7 open rotor blades. Two methods are proposed for improving the use of these data on general open rotor designs in a system noise assessment. The first, direct difference, is a simple octave band subtraction which does not account for tone distribution within the rotor acoustic signal. The second, tone matching, is a higher-fidelity process incorporating additional physical aspects of the problem, where isolated rotor tones are matched by their directivity to determine tone-by-tone shielding. A case study is conducted with the two methods to assess how well each reproduces the measured data and identify the merits of each. Both methods perform similarly for system level results and successfully approach the experimental data for the case study. The tone matching method provides additional tools for assessing the quality of the match to the data set. Additionally, a potential path to improve the tone matching method is provided.

  4. Scenario drafting to anticipate future developments in technology assessment

    Directory of Open Access Journals (Sweden)

    Retèl Valesca P

    2012-08-01

    Full Text Available Abstract Background Health Technology Assessment (HTA information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. Methods To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs was compared to clinical guidelines, calculated from the past (2005 until the future (2020. Results In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY, meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. Conclusions When optimal diffusion of a technology is sought, incorporating process

  5. TECHNOLOGY ASSESSMENT OF TIRE MOULD CLEANING SYSTEMS AND QUALITY FINISHING

    Directory of Open Access Journals (Sweden)

    Cristiano Fragassa

    2016-09-01

    Full Text Available A modern tire merges up to 300 different chemical elements, both organic and inorganic, natural and synthetic. During manufacturing, various processes are present such as mixing, calendering and extrusion, forming dozens of individual parts. Then, moulding and vulcanization inside special moulds provides the tire its final shape. Since the surface quality of moulds strongly affects the quality of tire, mould cleaning is a fundamental aspect of the whole tire production and cleaning techniques are in continuous development. This investigation proposes a global technology assessment of tire mould cleaning systems including uncommon solutions as multi-axis robots for cleaning on board by laser or dry ice, or ultrasonic cleaning which use cavitation. A specific attention is also focused on the industry adoption of spring-vents in moulds and how they are influencing the development the quality of final products.

  6. ECASTAR: Energy conservation. An assessment of systems, technologies and requirements

    Science.gov (United States)

    1975-01-01

    A methodology was presented for a systems approach to energy conservation actions and their potentials and impacts in the United States. Constraints affecting the approach were ranked, and the most important ones are the present economic and technical conditions. The following unresolved issues were identified: consumptive lifestyles vs. conservation ethic, environmental standards vs. energy conservation, capital availability, decentralization and vertical integration vs. centralization, fuel rich regions vs. fuel poor regions, supply vs. end use conservation, life cycle costing vs. initial cost, mandatory savings vs. voluntary savings, labor intensive vs. capital intensive, price control vs. free market. The following recommendations were made: provide action/impact assessment, establish regional energy centers, improve technology articulation with government, design total energy systems, utilize existing systems approach expertise.

  7. Multipurpose Panel Display Device Investigation. [technology assessment and product development

    Science.gov (United States)

    Sliwa, R.

    1977-01-01

    A multipurpose panel was developed to provide a flexible control and a LED display panel with easily changeable nomenclature for use in applications where panel space is limited, but where a number of similar subsystems must be controlled, or where basic panel nomenclature and functions must be changed rapidly, as in the case of between mission changes of space shuttle payloads. In the first application, panel area limitations are overcome by time sharing a central control panel among several subsystems. In the latter case, entire control panel changes are effected by simply replacing a memory module, thereby reducing the extent of installation and checkout procedures between missions. Several types of control technologies (other than LED's) which show potential in meeting criteria for overcoming limitations of the panel are assessed.

  8. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI).

  9. Health technology assessment implementation: the politics of ethics.

    Science.gov (United States)

    Callahan, Daniel

    2012-01-01

    Using a 2009 American debate on a federal public health recommendation on mammography screening for women under the age of 50 as a case study, it is argued that public acceptance of health technology assessment (HTA) depends on the ethical acceptability of its recommendations. At the same time, that acceptability cannot be separated from the politics and values of the health care system of which it is part. In the United States, those values display a sharp ideological split between a conservative individual-based ethic and a liberal community-oriented ethic. A clash of this kind cannot be solved by invocation of ethical principles when it is those principles themselves that are in conflict. Inevitably HTA acceptance is threatened by this conflict as is the fate of health care reform.

  10. Indexes system of technological condition assessment of economic branches

    Science.gov (United States)

    Chuvashova, M. N.; Avramchikova, N. T.; Antamoshkin, A. N.

    2015-10-01

    The increased level of innovative production process, connected with the current trends, points out the necessity of economic diversification of the whole national economy as well as regional economies in order to increase competitiveness and stable development. Russian regional economies are characterized with local directive of development and innovative processes have evident local vector. Intensive development of Siberian regional economies, which depends on oil and mining industries, considerably falls behind the world indicators according to the GRP output per head. To improve the quality of economic space the authors have suggested a new scientific approach, which allows qualitative assessment inside the economic space of resource-based regions, based on principles of high technological modes development inside economic branches taking into account density, regular enterprise distribution and connectivity of commercial organizations as well as secures innovative development of regional economy and its competitiveness. In this context it is necessary to develop a modern system of indexes, characterizing the structure of economic branches in accordance with present technological modes and at the same time the dynamics of appropriate structural shifts in regional economies of this type.

  11. Japanese technology assessment: Computer science, opto- and microelectronics mechatronics, biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Brandin, D.; Wieder, H.; Spicer, W.; Nevins, J.; Oxender, D.

    1986-01-01

    The series studies Japanese research and development in four high-technology areas - computer science, opto and microelectronics, mechatronics (a term created by the Japanese to describe the union of mechanical and electronic engineering to produce the next generation of machines, robots, and the like), and biotechnology. The evaluations were conducted by panels of U.S. scientists - chosen from academia, government, and industry - actively involved in research in areas of expertise. The studies were prepared for the purpose of aiding the U.S. response to Japan's technological challenge. The main focus of the assessments is on the current status and long-term direction and emphasis of Japanese research and development. Other aspects covered include evolution of the state of the art; identification of Japanese researchers, R and D organizations, and resources; and comparative U.S. efforts. The general time frame of the studies corresponds to future industrial applications and potential commercial impacts spanning approximately the next two decades.

  12. Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

    Science.gov (United States)

    Ancel, Ersin; Shih, Ann T.

    2014-01-01

    NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

  13. Life cycle impact assessment of various waste conversion technologies.

    Science.gov (United States)

    Khoo, Hsien H

    2009-06-01

    Advanced thermal treatment technologies utilizing pyrolysis or gasification, as well as a combined approach, are introduced as sustainable methods to treat wastes in Singapore. Eight different technologies are evaluated: pyrolysis-gasification of MSW; pyrolysis of MSW; thermal cracking gasification of granulated MSW; combined pyrolysis, gasification and oxidation of MSW; steam gasification of wood; circulating fluidized bed (CFB) gasification of organic wastes; gasification of RDF; and the gasification of tyres. Life cycle assessment is carried out to determine the environmental impacts of the various waste conversion systems including global warming potential, acidification potential, terrestrial eutrophication and ozone photochemical formation. The normalization and weighting results, calculated according to Singapore national emission inventories, showed that the two highest impacts are from thermal cracking gasification of granulated MSW and the gasification of RDF; and the least are from the steam gasification of wood and the pyrolysis-gasification of MSW. A simplified life cycle cost comparison showed that the two most costs-effective waste conversion systems are the CFB gasification of organic waste and the combined pyrolysis, gasification and oxidation of MSW. The least favorable - highest environmental impact as well as highest costs - are the thermal cracking gasification of granulated MSW and the gasification of tyres.

  14. Enhancing Teachers' Technological Knowledge and Assessment Practices to Enhance Student Learning in Technology: A Two-year Classroom Study

    Science.gov (United States)

    Moreland, Judy; Jones, Alister; Northover, Ann

    2001-02-01

    This paper reports on a two-year classroom investigation of primary school (Years 1-8) technology education. The first year of the project explored emerging classroom practices in technology. In the second year intervention strategies were developed to enhance teaching, learning and assessment practices. Findings from the first year revealed that assessment was often seen in terms of social and managerial aspects, such as teamwork, turn taking and co-operative skills, rather than procedural and conceptual technological aspects. Existing formative interactions with students distorted the learning away from the procedural and conceptual aspects of the subject. The second year explored the development of teachers' technological knowledge in order to enhance formative assessment practices in technology, to inform classroom practice in technology, and to enhance student learning. Intervention strategies were designed to enhance the development of procedural, conceptual, societal and technical aspects of technology for teachers and students. The results from this intervention were very positive. This paper highlights the importance of developing teacher expertise pertaining to broad concepts of technology, detailed concepts in different technological areas and general pedagogical knowledge. The findings from this research therefore have implications for thinking about teaching, learning and assessment in technology.

  15. Health Technology Assessment and vaccine: new needs and opportunities?

    Directory of Open Access Journals (Sweden)

    Giuseppe La Torre

    2007-03-01

    Full Text Available Health Technology Assessment (HTA can represent an innovative and effective approach to supply decisionmakers with a valid instrument to improve the allocation of resources in the field of vaccines. We proposed a HTA approach for considering the introduction of a new vaccine that could potentially have a great impact on the population’s health, using as an example the vaccine against Human Papilloma Virus (HPV. This approach could be of great interest when the decision making process involves choices regarding new vaccines. We developed a HTA approach for assessing all of the aspects involved in the introduction of vaccines against HPV in Italy, considering the following issues: - epidemiological evaluation of HPV infection and related pathologies through the consultation of data banks and the scientific literature; - evaluation of health care resources utilisation by people suffering from the infection/ related diseases, through the consultation of hospital archives; - systematic review and meta-analysis of randomised clinical trials on HPV vaccination effectiveness and safety; - mathematical modelling and economic evaluation of the vaccination using a cost-effectiveness analysis; - evaluation of the impact of vaccination on the Health System [organisational aspects, vaccine surveillance, relationship between different decisional levels (national, regional]; - analysis of the ethical, social (acceptability, availability, accessibility, information and legislative aspects of vaccination. A HTA report on the new vaccine could represent an new important tool to support the choice of decision makers in order to better inform the allocation of economic resources and maximize healthcare services, since it takes into account not only the burden and the epidemiology of the disease, and the economic evaluation of different scenarios, but also the social, legal and bioethical aspects. For HTA to support the introduction of new technologies, and new

  16. Comparative evaluation by lifecycle and risk assessment of agrobiological and technological routes of production

    NARCIS (Netherlands)

    Moll, H.C.; Schoot Uiterkamp, A.J.M.

    1997-01-01

    The application of lifecycle and risk assessment methodologies for environmental assessment of agricultural products is growing and produces interesting results. This allows comparisons between agricultural and technological routes of production. An evaluation of such assessments provides increased

  17. Comparison of tools for assessing the methodological quality of primary and secondary studies in health technology assessment reports in Germany

    Directory of Open Access Journals (Sweden)

    Walter, Ulla

    2010-01-01

    Full Text Available Health care policy background: Findings from scientific studies form the basis for evidence-based health policy decisions. Scientific background: Quality assessments to evaluate the credibility of study results are an essential part of health technology assessment reports and systematic reviews. Quality assessment tools (QAT for assessing the study quality examine to what extent study results are systematically distorted by confounding or bias (internal validity. The tools can be divided into checklists, scales and component ratings. Research questions: What QAT are available to assess the quality of interventional studies or studies in the field of health economics, how do they differ from each other and what conclusions can be drawn from these results for quality assessments? Methods: A systematic search of relevant databases from 1988 onwards is done, supplemented by screening of the references, of the HTA reports of the German Agency for Health Technology Assessment (DAHTA and an internet search. The selection of relevant literature, the data extraction and the quality assessment are carried out by two independent reviewers. The substantive elements of the QAT are extracted using a modified criteria list consisting of items and domains specific to randomized trials, observational studies, diagnostic studies, systematic reviews and health economic studies. Based on the number of covered items and domains, more and less comprehensive QAT are distinguished. In order to exchange experiences regarding problems in the practical application of tools, a workshop is hosted. Results: A total of eight systematic methodological reviews is identified as well as 147 QAT: 15 for systematic reviews, 80 for randomized trials, 30 for observational studies, 17 for diagnostic studies and 22 for health economic studies. The tools vary considerably with regard to the content, the performance and quality of operationalisation. Some tools do not only include the

  18. Assessment of Corrosion Characteristics and Development of Remedial Technologies in Nuclear Materials

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hong Pyo; Kim, J. S.; Lim, Y. S. (and others)

    2007-04-15

    In general, materials having superior resistance to corrosion are used for main components and structures in nuclear power plants (NPPs) to improve their safety. During long-term operations in the high temperature and pressure environment, however, localized-corrosion related degradations occur frequently in those materials, leading to unexpected shutdown of the plants. The unexpected shutdowns may lower the operating efficiency of the power generation and expand the repair period, which results in a huge economical loss. Moreover, since the damages may cause a leakage of the primary coolant that brings about a contamination by radioactive substances, the corrosion related degradations of structural materials have become a menace to the safety of NPPs. The steam generator tubes forming a boundary between the primary and secondary sides of NPPs are one of the main components that are most damaged by corrosion. Therefore, it is strongly required to verify the degradation mechanisms of Alloy 182 and Alloy 600 materials used in the steam generator tubes and primary systems, to establish remedial techniques for the degradations, to manage the damages, and to develop techniques for the extension of the plant's life. In this study, (1) the assessment techniques of corrosion damages were improved and the database of the obtained results were established. (2) The basic technologies of the management of corrosion damages were developed for the practical use. (3) The fundamental technologies for inhibition and repair of corrosion damages were also developed. The results of this project are applicable to the assessment, failure analysis and life estimation of the materials against corrosion damages. The assessment data obtained in this work are available for the technical references of the corrosion failures of components in NPPs during operation. Furthermore, it is applicable to establish materials design requirements, to establish the optimum operation condition and to

  19. BoreholeAR: A mobile tablet application for effective borehole database visualization using an augmented reality technology

    Science.gov (United States)

    Lee, Sangho; Suh, Jangwon; Park, Hyeong-Dong

    2015-03-01

    Boring logs are widely used in geological field studies since the data describes various attributes of underground and surface environments. However, it is difficult to manage multiple boring logs in the field as the conventional management and visualization methods are not suitable for integrating and combining large data sets. We developed an iPad application to enable its user to search the boring log rapidly and visualize them using the augmented reality (AR) technique. For the development of the application, a standard borehole database appropriate for a mobile-based borehole database management system was designed. The application consists of three modules: an AR module, a map module, and a database module. The AR module superimposes borehole data on camera imagery as viewed by the user and provides intuitive visualization of borehole locations. The map module shows the locations of corresponding borehole data on a 2D map with additional map layers. The database module provides data management functions for large borehole databases for other modules. Field survey was also carried out using more than 100,000 borehole data.

  20. Ecological Momentary Assessment in Behavioral Research: Addressing Technological and Human Participant Challenges

    Science.gov (United States)

    Shiffman, Saul; Music, Edvin; Styn, Mindi A; Kriska, Andrea; Smailagic, Asim; Siewiorek, Daniel; Ewing, Linda J; Chasens, Eileen; French, Brian; Mancino, Juliet; Mendez, Dara; Strollo, Patrick; Rathbun, Stephen L

    2017-01-01

    Background Ecological momentary assessment (EMA) assesses individuals’ current experiences, behaviors, and moods as they occur in real time and in their natural environment. EMA studies, particularly those of longer duration, are complex and require an infrastructure to support the data flow and monitoring of EMA completion. Objective Our objective is to provide a practical guide to developing and implementing an EMA study, with a focus on the methods and logistics of conducting such a study. Methods The EMPOWER study was a 12-month study that used EMA to examine the triggers of lapses and relapse following intentional weight loss. We report on several studies that informed the implementation of the EMPOWER study: (1) a series of pilot studies, (2) the EMPOWER study’s infrastructure, (3) training of study participants in use of smartphones and the EMA protocol and, (4) strategies used to enhance adherence to completing EMA surveys. Results The study enrolled 151 adults and had 87.4% (132/151) retention rate at 12 months. Our learning experiences in the development of the infrastructure to support EMA assessments for the 12-month study spanned several topic areas. Included were the optimal frequency of EMA prompts to maximize data collection without overburdening participants; the timing and scheduling of EMA prompts; technological lessons to support a longitudinal study, such as proper communication between the Android smartphone, the Web server, and the database server; and use of a phone that provided access to the system’s functionality for EMA data collection to avoid loss of data and minimize the impact of loss of network connectivity. These were especially important in a 1-year study with participants who might travel. It also protected the data collection from any server-side failure. Regular monitoring of participants’ response to EMA prompts was critical, so we built in incentives to enhance completion of EMA surveys. During the first 6 months of