WorldWideScience

Sample records for technologies volume ii

  1. Technology transfer package on seismic base isolation - Volume II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume II contains the proceedings for the Short Course on Seismic Base Isolation held in Berkeley, California, August 10-14, 1992.

  2. Assessment of control technology for stationary sources. Volume II: control technology data tables. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    This report, the Control Technology Data Tables, is the second volume of the three-volume final report for the contract. It presents in tabular format, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts and application status. Also included is a code list which classifies the stationary sources examined by industry, process, and emission source.

  3. Environmental control implications of generating electric power from coal. Technology status report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized-bed combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems. Volume II presents the detailed technology analyses complete with reference citations. This same material is given in condensed form in Volume I without references. A brief executive summary is also given in Volume I.

  4. Animal Science Technology. An Experimental Developmental Program. Volume II, Curriculum Course Outlines.

    Science.gov (United States)

    Brant, Herman G.

    This volume, the second of a two part evaluation report, is devoted exclusively to the presentation of detailed course outlines representing an Animal Science Technology curriculum. Arranged in 6 terms of study (2 academic years), outlines are included on such topics as: (1) Introductory Animal Science, (2) General Microbiology, (3) Zoonoses, (4)…

  5. Solar/hydrogen systems technologies. Volume II (Part 1 of 2). Solar/hydrogen systems assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Escher, W. J.D.; Foster, R. W.; Tison, R. R.; Hanson, J. A.

    1980-06-02

    Volume II of the Solar/Hydrogen Systems Assessment contract report (2 volumes) is basically a technological source book. Relying heavily on expert contributions, it comprehensively reviews constituent technologies from which can be assembled a wide range of specific solar/hydrogen systems. Covered here are both direct and indirect solar energy conversion technologies; respectively, those that utilize solar radiant energy input directly and immediately, and those that absorb energy from a physical intermediary, previously energized by the sun. Solar-operated hydrogen energy production technologies are also covered in the report. The single most prominent of these is water electrolysis. Utilization of solar-produced hydrogen is outside the scope of the volume. However, the important hydrogen delivery step is treated under the delivery sub-steps of hydrogen transmission, distribution and storage. An exemplary use of the presented information is in the synthesis and analysis of those solar/hydrogen system candidates documented in the report's Volume I. Morever, it is intended that broad use be made of this technology information in the implementation of future solar/hydrogen systems. Such systems, configured on either a distributed or a central-plant basis, or both, may well be of major significance in effecting an ultimate transition to renewable energy systems.

  6. Solar/hydrogen systems technologies. Volume II (Part 2 of 2). Solar/hydrogen systems assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Escher, W. J.D.; Foster, R. W.; Tison, R. R.; Hanson, J. A.

    1980-06-02

    Volume II of the Solar/Hydrogen Systems Assessment contract report (2 volumes) is basically a technological source book. Relying heavily on expert contributions, it comprehensively reviews constituent technologies from which can be assembled a wide range of specific solar/hydrogen systems. Covered here are both direct and indirect solar energy conversion technologies; respectively, those that utilize solar radiant energy input directly and immediately, and those that absorb energy from a physical intermediary, previously energized by the sun. Solar-operated hydrogen energy production technologies are also covered in the report. The single most prominent of these is water electrolysis. Utilization of solar-produced hydrogen is outside the scope of the volume. However, the important hydrogen delivery step is treated under the delivery sub-steps of hydrogen transmission, distribution and storage. An exemplary use of the presented information is in the synthesis and analysis of those solar/hydrogen system candidates documented in the report's Volume I. Moreover, it is intended that broad use be made of this technology information in the implementation of future solar/hydrogen systems. Such systems, configured on either a distributed or a central-plant basis, or both, may well be a major significance in effecting an ultimate transition to renewable energy systems.

  7. Impact of geothermal technology improvements on royalty collections on federal lands: Volume II: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1988-10-01

    This volume contains the appendices for the ''Impact of Geothermal Technology Improvements on Royalty Collections on Federal Lands, Final Report, Volume I.'' The material in this volume supports the conclusions presented in Volume I and details each Known Geothermal Resource Area's (KGRA's) royalty estimation. Appendix A details the physical characteristics of each KGRA considered in Volume I. Appendix B supplies summary narratives on each state which has a KGRA. The information presented in Appendix C shows the geothermal power plant area proxies chosen for each KGRA considered within the report. It also provides data ranges which fit into the IMGEO model for electric energy cost estimates. Appendix D provides detailed cost information from the IMGEO model if no Geothermal Program RandD goals were completed beyond 1987 and if all the RandD goals were completed by the year 2000. This appendix gives an overall electric cost and major system costs, which add up to the overall electric cost. Appendix E supplies information for avoided cost projections for each state involved in the study that were used in the IMGEO model run to determine at what cost/kWh a 50 MWe plant could come on line. Appendix F supplies the code used in the determination of royalty income, as well as, tabled results of the royalty runs (detailed in Appendix G). The tabled results show royalty incomes, assuming a 10% discount rate, with and without RandD and with and without a $0.01/kWh transmission cost. Individual data sheets for each KGRA royalty income run are presented in Appendix G.

  8. Technical and economic assessment of fluidized bed augmented compressed air energy-storage system. Volume II. Introduction and technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Giramonti, A.J.; Lessard, R.D.; Merrick, D.; Hobson, M.J.

    1981-09-01

    The results are described of a study subcontracted by PNL to the United Technologies Research Center on the engineering feasibility and economics of a CAES concept which uses a coal fired, fluidized bed combustor (FBC) to heat the air being returned from storage during the power production cycle. By burning coal instead of fuel oil, the CAES/FBC concept can completely eliminate the dependence of compressed air energy storage on petroleum fuels. The results of this assessment effort are presented in three volumes. Volume II presents a discussion of program background and an in-depth coverage of both fluid bed combustion and turbomachinery technology pertinent to their application in a CAES power plant system. The CAES/FBC concept appears technically feasible and economically competitive with conventional CAES. However, significant advancement is required in FBC technology before serious commercial commitment to CAES/FBC can be realized. At present, other elements of DOE, industrial groups, and other countries are performing the required R and D for advancement of FBC technology. The CAES/FBC will be reevaluated at a later date when FBC technology has matured and many of the concerns now plaguing FBC are resolved. (LCL)

  9. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES, VOLUME II

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

  10. The Objective Force Soldier/Soldier Team. Volume II - The Science and Technology Challenges

    Science.gov (United States)

    2001-11-01

    Number 703767-9007 DSN 427-9007 Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39.18 DISCLAIMER This report is the product of the Army Science...MOSAIC. Commercial technology air interfaces and protocols, such as CDMA , Bluetooth, and Personnel Data Assistants (PDAs) will provide technology

  11. Technology assessment of solar energy systems. Scenario development and methodology. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Schiffman, Y.M.

    1981-07-01

    Included are a general overview of the Technology Assessment of Solar Energy systems (TASE) project and a description of the study approach, the development of the TASE scenarios, energy and environmental assumptions, and assumptions and forecasts of the FOSSIL2 National Energy Model upon which the TASE scenarios were based. The Strategic Environmental Assessment System (SEAS) model was used to generate the analytical data base for TASE. Improvements made to SEAS to allow it to model solar and biomass energy technologies are also described.

  12. Technology Scenario for the Year 2005. Volume II. Detailed Scenes for Scenarios.

    Science.gov (United States)

    1981-10-01

    from a very considerable distance, acoustic devices that analyse radiated sound signatures, and IR receivers that analyse heat radiation patterns...to counter with nasking tactics of one kind or another--such a.s radiation of false electromagnetic signatures, electronic jamming, etc. Only a...ries Science, Technology, and I novat ion. Treparedl 1,r tile :atioana[ Science Foundation. Columbus: Bat telleo, 1973. .ieittv, .1. Kell Iv, ’ Solair

  13. Tribological Technology. Volume II.

    Science.gov (United States)

    1982-09-01

    TABLE 7 PRESSURE-VISCOSITY COEFFICIENTS (REF. 11) I - . ..- 445 103 -- 02 -s 10 00 A04wCm eve * oPe’-re’ -.* : ;-T’ enl mne-SI C. oC-ftht’E 050 100...821745~r A𔃿 32 l C 225 Mt25 5 12 o60 310 it 34C 6 85 io 11 * 3f5 . 295 t~ri~ Lortoing.~ eve lrsi~in4635 W-ongor St. K-o,- CrY. Wi~- 84 112 -7.BLE 11...forming on the surfaces and this phenomenon has been used by March and Rabinowicz (1976) for incipient fatigu 6 investigations using a rolling four-ball

  14. Coal slurry combustion and technology. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Volume II contains papers presented at the following sessions of the Coal Slurry Combustion and Technology Symposium: (1) bench-scale testing; (2) pilot testing; (3) combustion; and (4) rheology and characterization. Thirty-three papers have been processed for inclusion in the Energy Data Base. (ATT)

  15. Photovoltaic module encapsulation design and materials selection. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Cuddihy, E.

    1984-06-01

    This is Volume II of Photovoltaic Module Encapsulation Design and Materials Selection: a periodically updated handbook of encapsulation technology, developed with the support of the Flat-Plate Solar Array Project (FSA), managed for the Department of Energy (DOE) by the Jet Propulsion Laboratory. Volume II describes FSA encapsulation technology developed between June 1, 1982, and January 1, 1984. Emphasis during this period shifted from materials development to demonstration of reliability and durability in an outdoor environment; the updated information in this volume reflects the developing technology base related to both reliability and encapsulation process improvements.

  16. Thermal Power Systems, Point-Focusing Distributed Receiver Technology Project. Annual technical report, Fiscal Year 1978. Volume II. Detailed report

    Energy Technology Data Exchange (ETDEWEB)

    1979-03-15

    Thermal or electrical power from the sun's radiated energy through Point-Focusing Distributed Receiver technology is the goal of this Project. The energy thus produced must be economically competitive with other sources. This Project supports the industrial development of technology and hardware for extracting energy from solar power to achieve the stated goal. Present studies are working to concentrate the solar energy through mirrors or lenses, to a working fluid or gas, and through a power converter change it to an energy source useful to man. Rankine-cycle and Brayton-cycle engines are currently being developed as the most promising energy converters for our near future needs. Accomplishments on point-focusing technology in FY 1978 are detailed.

  17. FINESSE: study of the issues, experiments and facilities for fusion nuclear technology research and development. Interim report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M.

    1984-10-01

    The Nuclear Fusion Issues chapter contains a comprehensive list of engineering issues for fusion reactor nuclear components. The list explicitly defines the uncertainties associated with the engineering option of a fusion reactor and addresses the potential consequences resulting from each issue. The next chapter identifies the fusion nuclear technology testing needs up to the engineering demonstration stage. (MOW)

  18. Demonstration project as a procedure for accelerating the application of new technology (Charpie Task Force report). Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-02-01

    This report examines the issues associated with government programs proposed for the ''commercialization'' of new energy technologies; these programs are intended to hasten the pace at which target technologies are adopted by the private sector. The ''commercial demonstration'' is the principal tool used in these programs. Most previous government interventions in support of technological change have focused on R and D and left to the private sector the decision as to adoption for commercial utilization; thus there is relatively little in the way of analysis or experience which bears direct application. The analysis is divided into four sections. First, the role of R, D, and D within the structure of the national energy goals and policies is examined. The issue of ''prices versus gaps'' is described as a crucial difference of viewpoint concerning the role of the government in the future of the energy system. Second, the process of technological change as it occurs with respect to energy technologies is then examined for possible sources of misalignment of social and private incentives. The process is described as a series of investments. Third, correction of these sources of misalignment then becomes the goal of commercial demonstration programs as this goal and the means for attaining it are explored. Government-supported commercialization may be viewed as a subsidy to the introduction stage of the process; the circumstances under which such subsidies are likely to affect the success of the subsequent diffusion stage are addressed. The discussion then turns to the political, legal, and institutional problems. Finally, methods for evaluation and planning of commercial demonstration programs are analyzed. The critical areas of ignorance are highlighted and comprise a research agenda for improved analytical techniques to support decisions in this area.

  19. Demonstration project as a procedure for accelerating the application of new technology (Charpie Task Force report). Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-02-01

    This report examines the issues associated with government programs proposed for the ''commercialization'' of new energy technologies; these programs are intended to hasten the pace at which target technologies are adopted by the private sector. The ''commercial demonstration'' is the principal tool used in these programs. Most previous government interventions in support of technological change have focused on R and D and left to the private sector the decision as to adoption for commercial utilization; thus there is relatively little in the way of analysis or experience which bears direct application. The analysis is divided into four sections. First, the role of R, D, and D within the structure of the national energy goals and policies is examined. The issue of ''prices versus gaps'' is described as a crucial difference of viewpoint concerning the role of the government in the future of the energy system. Second, the process of technological change as it occurs with respect to energy technologies is then examined for possible sources of misalignment of social and private incentives. The process is described as a series of investments. Third, correction of these sources of misalignment then becomes the goal of commercial demonstration programs as this goal and the means for attaining it are explored. Government-supported commercialization may be viewed as a subsidy to the introduction stage of the process; the circumstances under which such subsidies are likely to affect the success of the subsequent diffusion stage are addressed. The discussion then turns to the political, legal, and institutional problems. Finally, methods for evaluation and planning of commercial demonstration programs are analyzed. The critical areas of ignorance are highlighted and comprise a research agenda for improved analytical techniques to support decisions in this area.

  20. Modern Chemical Technology, Volume 5.

    Science.gov (United States)

    Pecsok, Robert L., Ed.; Chapman, Kenneth, Ed.

    This volume contains chapters 26-31 for the American Chemical Society (ACS) "Modern Chemical Technology" (ChemTeC) instructional material intended to prepare chemical technologists. Chapter 26 reviews oxidation and reduction, including applications in titrations with potassium permanganate and iodometry. Coordination compounds are…

  1. TECHNICAL REPORT ON TECHNOLOGICALLY ENHANCED NATURALLY OCCURRING RADIOACTIVE MATERIALS FROM URANIUM MINING, VOLUME II: INVESTIGATION OF POTENTIAL HEALTH, GEOGRAPHIC, AND ENVIRONMENTAL ISSUES OF ABANDONED URANIUM MINES

    Science.gov (United States)

    Volume II investigates the potential radiogenic risks from abandoned uranium mines and evaluates which may pose the greatest hazards to members of the public and to the environment. The intent of this report is to identify who may be most likely to be exposed to wastes at small a...

  2. ASDIR-II. Volume II. Program Description

    Science.gov (United States)

    1975-01-01

    34- - , *f,7J ,, .I .I).’ t•I r ojo o o I D - ý flo 1 1nt o - IV0C Kൈ.,4M %n -tI.,n aV 16ncc~’’ 4 1’ 1 ,m In %nOIN~CIN, t~tt & In, .)mrif4 ftj’.3N4).iiM...In 4.4 teat W 4.V . mI N )41 CD W4.4 ’( mal . I". CV ’. - C- .4 kq *W k, W i . C~ C L &j C11 t.4 t-JC IV . th- LZ %Pe W il IN . I’M VI. i l ~l I ) S P...4 -9 3 1a -4 - w-eq 4 - 4 - a. in 1`, mal 4.) 7, ;-riMrim- tfn ~n(l4 Sc~mn r I Al A’ X -’ t ;V N X XDl ;0I -M ’.C xci)At.x;7 ; u ,A )XU ,X;uxvA i a

  3. DART II documentation. Volume III. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    The DART II is a remote, interactive, microprocessor-based data acquistion system suitable for use with air monitors. This volume of DART II documentation contains the following appendixes: adjustment and calibration procedures; mother board signature list; schematic diagrams; device specification sheets; ROM program listing; 6800 microprocessor instruction list, octal listing; and cable lists. (RWR)

  4. V meeting of research and technological development of radioactive waste management. Volume II; V Jornadas de investigacion y desarrollo tecnologico en gestion de residuos radiactivos. volumen II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Since ENRESA's establishment, the Company has been Developing Solutions through its R and D Programme as key factor of knowledge, scientific and technological development providing solutions to those aspects related where there is not available conventional and industrial capabilities. Main works have been developed concerning to HLW, LILW, Radiological Protection, Dismantling and Closure, Facilities supporting, Old Uranium Mill Tailing Environmental Restoration, and improvements of aspects related to safety, are the pillars supporting the different ENRESA's R and D Plans. Nowadays, ENRESA has finished its current R and D Plan 1999-2003. The results obtained under this framework are the basis to build next Plan 2004-2008 as the ENRESA's Fifth R and D Plan, according to General Radioactive Waste Plan and in parallel to the co-operation opportunities offered through the International and National Framework of R and D (Spanish National Programme of R and D, EU Sixth R and D Framework, NEA/OCDE, IAEA/OIEA, and main bilateral agreements between main national agencies, etc.). In this sense, ENRESA takes advantage in order to offer the main scientific and technological results reached so far in this field results reached and showed to the Spanish society in the open summit, on last 1 to 4 December 2003, in Tarragona City. The present document is a compilation of the oral presentations carried out under the framework of this meeting. Likewise, this meeting was a key action to transmit to the society in a clear and transparent way the effort that ENRESA is making according to the environmental sustainable criteria in order to Build the Future. (Author)

  5. Reading Authentic Polish, Volume II.

    Science.gov (United States)

    Walczynski, Waldemar

    The second volume on reading authentic Polish is the continuation of a supplementary textbook to be used either in the classroom or in independent study. The materials included in it are unaltered authentic texts from Polish newspapers, magazines, and other mass media that provide exposure to the context and format of everyday reading matter. The…

  6. Joule II - Programme. Clean coal technology R & D. 2nd phase. Volume III. Atmospheric combustion of pulverized coal and coal based blends for power generation

    Energy Technology Data Exchange (ETDEWEB)

    Hein, K.R.G.; Minchener, A.J.; Pruschek, R.; Roberts, P.A. [eds.

    1998-12-31

    Topics covered in this Joule II clean coal technology publication include: coal preparation and blending; cocombustion of coal with biomass and wastes; flame modelling; NO{sub x} abatement by combustion control and staging; coal quality and NO{sub x} emissions; coal combustion properties; and fluidized bed combustion of coal. All papers have been abstracted separately.

  7. Culture of Schools. Final Report. Volume II

    Science.gov (United States)

    American Anthropological Association, Washington, DC.

    Volume II of this 4-volume report contains the second half of a report on the Conference on the Culture of Schools held at Greystone, New York, (the first half of the conference report appears in Vol. I, SP 003 900), and the first part of a report on the Colloquium on the Culture of Schools held at the New School for Social Research in 1966. (The…

  8. Future information technology II

    CERN Document Server

    Pan, Yi; Kim, Cheonshik; Yang, Yun

    2015-01-01

    The new multimedia standards (for example, MPEG-21) facilitate the seamless integration of multiple modalities into interoperable multimedia frameworks, transforming the way people work and interact with multimedia data. These key technologies and multimedia solutions interact and collaborate with each other in increasingly effective ways, contributing to the multimedia revolution and having a significant impact across a wide spectrum of consumer, business, healthcare, education, and governmental domains. This book aims to provide a complete coverage of the areas outlined and to bring together the researchers from academic and industry as well as practitioners to share ideas, challenges, and solutions relating to the multifaceted aspects of this field.

  9. Site Environmental Report for 2007 Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Lackner, Regina E; Baskin, David; Fox, Robert; Jelinski, John; Pauer, Ron; Thorson, Patrick; Wahl, Linnea; Wyrick, Steve

    2008-09-15

    The Site Environmental Report for 2007 is an integrated report on the environmental programs at Lawrence Berkeley National Laboratory and satisfies the requirements of DOE Order 231.1A, Environment, Safety, and Health Reporting. Volume II contains individual data results from surveillance and monitoring activities.

  10. Survey of biomass gasification. Volume II. Principles of gasification

    Energy Technology Data Exchange (ETDEWEB)

    Reed, T.B. (comp.)

    1979-07-01

    Biomass can be converted by gasification into a clean-burning gaseous fuel that can be used to retrofit existing gas/oil boilers, to power engines, to generate electricity, and as a base for synthesis of methanol, gasoline, ammonia, or methane. This survey describes biomass gasification, associated technologies, and issues in three volumes. Volume I contains the synopsis and executive summary, giving highlights of the findings of the other volumes. In Volume II the technical background necessary for understanding the science, engineering, and commercialization of biomass is presented. In Volume III the present status of gasification processes is described in detail, followed by chapters on economics, gas conditioning, fuel synthesis, the institutional role to be played by the federal government, and recommendations for future research and development.

  11. DART II documentation. Volume III. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-23

    The DART II is a data acquisition system that can be used with air pollution monitoring equipment. This volume contains appendices that deal with the following topics: adjustment and calibration procedures (power supply adjustment procedure, ADC calibration procedure, analog multiplexer calibration procedure); mother board signature list; schematic diagrams; device specification sheets (microprocessor, asynchronous receiver/transmitter, analog-to-digital converter, arithmetic processing unit, 5-volt power supply, +- 15-volt power supply, 24-volt power supply, floppy disk formater/controller, random access static memory); ROM program listing; 6800 microprocessor instruction set, octal listing; and cable lists. (RR)

  12. Technology transfer package on seismic base isolation - Volume III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume III contains supporting materials not included in Volumes I and II.

  13. Aerospace Technology Innovation. Volume 9

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor)

    2001-01-01

    Commercializing technology is a daunting task. Of every 11 new product ideas, only one will successfully make it to the marketplace. Fully 46% of new product investment becomes sunk in cost. Yet, a few good companies consistently attain an 80% technology commercialization success rate and have lead the way in establishing best practices. The NASA Incubator program consists of nine incubators, each residing near a NASA research center. The purpose of the incubators is to use the best practices is to use the best practices of technology commercialization to help early stage businesses successfully launch new products that incorporate NASA technology.

  14. Modern Chemical Technology, Volume 9.

    Science.gov (United States)

    Pecsok, Robert L.; Chapman, Kenneth

    This volume is one of the series for the Chemical Technician Curriculum Project (ChemTeC) of the American Chemical Society funded by the National Science Foundation. It consists of discussions, exercises, and experiments on the following topics: ion exchange, electrphoresis, dialysis, electrochemistry, corrosion, electrolytic cells, coulometry,…

  15. Site Environmental Report for 2005 Volume I and Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Ruggieri, Michael

    2006-07-07

    Each year, Ernest Orlando Lawrence Berkeley National Laboratory prepares an integrated report on its environmental programs to satisfy the requirements of United States Department of Energy Order 231.1A, ''Environment, Safety, and Health Reporting''. The ''Site Environmental Report for 2005'' summarizes Berkeley Lab's environmental management performance, presents environmental monitoring results, and describes significant programs for calendar year 2005. (Throughout this report, Ernest Orlando Lawrence Berkeley National Laboratory is referred to as ''Berkeley Lab'', ''the Laboratory'', ''Lawrence Berkeley National Laboratory'', and ''LBNL''.) The report is separated into two volumes. Volume I contains an overview of the Laboratory, the status of environmental programs, and summarized results from surveillance and monitoring activities. This year's Volume I text body is organized into an executive summary followed by six chapters. The report's structure has been reorganized this year, and it now includes a chapter devoted to environmental management system topics. Volume II contains individual data results from surveillance and monitoring activities. The ''Site Environmental Report'' is distributed by releasing it on the Web from the Berkeley Lab Environmental Services Group (ESG) home page, which is located at http://www.lbl.gov/ehs/esg/. Many of the documents cited in this report also are accessible from the ESG Web page. CD and printed copies of this Site Environmental Report are available upon request. The report follows the Laboratory's policy of using the International System of Units (SI), also known as the metric system of measurements. Whenever possible, results are also reported using the more conventional (non-SI) system of measurements, because the non-SI system is referenced by several current

  16. Draft Strategic Laboratory Missions Plan. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This volume described in detail the Department`s research and technology development activities and their funding at the Department`s laboratories. It includes 166 Mission Activity Profiles, organized by major mission area, with each representing a discrete budget function called a Budget and Reporting (B & R) Code. The activities profiled here encompass the total research and technology development funding of the laboratories from the Department. Each profile includes a description of the activity and shows how the funding for that activity is distributed among the DOE laboratories as well as universities and industry. The profiles also indicate the principal laboratories for each activity, as well as which other laboratories are involved. The information in this volume is at the core of the Strategic Laboratory Mission Plan. It enables a reader to follow funds from the Department`s appropriation to a specific activity description and to specific R & D performing institutions. This information will enable the Department, along with the Laboratory Operations Board and Congress, to review the distribution of R & D performers chosen to execute the Department`s missions.

  17. Aerospace Technology Innovation. Volume 10

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor); Bennett, Evonne (Editor); Vendette, Joel (Editor); West, Kenyon (Editor)

    2002-01-01

    Whether finding new applications for existing NASA technologies or developing unique marketing strategies to demonstrate them, NASA's offices are committed to identifying unique partnering opportunities. Through their efforts NASA leverages resources through joint research and development, and gains new insight into the core areas relevant to all NASA field centers. One of the most satisfying aspects of my job comes when I learn of a mission-driven technology that can be spun-off to touch the lives of everyday people. NASA's New Partnerships in Medical Diagnostic Imaging is one such initiative. Not only does it promise to provide greater dividends for the country's investment in aerospace research, but also to enhance the American quality of life. This issue of Innovation highlights the new NASA-sponsored initiative in medical imaging. Early in 2001, NASA announced the launch of the New Partnerships in Medical Diagnostic Imaging initiative to promote the partnership and commercialization of NASA technologies in the medical imaging industry. NASA and the medical imaging industry share a number of crosscutting technologies in areas such as high-performance detectors and image-processing tools. Many of the opportunities for joint development and technology transfer to the medical imaging market also hold the promise for future spin back to NASA.

  18. An Independent Scientific Assessment of Well Stimulation in California Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Long, Jane C.S. [California Council on Science and Technology, Sacramento, CA (United States); Feinstein, Laura C. [California Council on Science and Technology, Sacramento, CA (United States); Bachmann, Corinne E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Birkholzer, Jens T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Camarillo, Mary Kay [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Domen, Jeremy K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Foxall, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Houseworth, James [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jin, Ling [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jordan, Preston D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Maddalena, Randy L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKone, Thomas E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Millstein, Dev E. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Reagan, Matthew T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sandelin, Whitney L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stringfellow, William T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Varadharajan, Charuleka [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cooley, Heather [Pacific Inst., Oakland, CA (United States); Donnelly, Kristina [Pacific Inst., Oakland, CA (United States); Heberger, Matthew G. [Pacific Inst., Oakland, CA (United States); Hays, Jake [PSE Healthy Energy, Berkeley, CA (United States); Shonkoff, Seth B.C. [PSE Healthy Energy, Berkeley, CA (United States); Brandt, Adam [Stanford Univ., CA (United States); Englander, Jacob G. [Stanford Univ., CA (United States); Hamdoun, Amro [Univ. of California of San Diego, La Jolla, CA (United States); Nicklisch, Sascha C.T. [Univ. of California of San Diego, La Jolla, CA (United States); Harrison, Robert J. [Univ. of California, San Francisco, CA (United States); Wettstein, Zachary S. [Univ. of California, San Francisco, CA (United States); Banbury, Jenner [California State Univ. Stanislaus, Turlock, CA (United States); Cypher, Brian L. [California State Univ. Stanislaus, Turlock, CA (United States); Phillips, Scott E. [California State Univ. Stanislaus, Turlock, CA (United States)

    2015-07-01

    This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, the present volume, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, also issued in July 2015, presents case studies that assess environmental issues and qualitative risks for specific geographic regions. A final Summary Report summarizes key findings, conclusions and recommendations of all three volumes.

  19. Sodium fast reactor safety and licensing research plan. Volume II.

    Energy Technology Data Exchange (ETDEWEB)

    Ludewig, H. (Brokhaven National Laboratory, Upton, NY); Powers, D. A.; Hewson, John C.; LaChance, Jeffrey L.; Wright, A. (Argonne National Laboratory, Argonne, IL); Phillips, J.; Zeyen, R. (Institute for Energy Petten, Saint-Paul-lez-Durance, France); Clement, B. (IRSN/DPAM.SEMIC Bt 702, Saint-Paul-lez-Durance, France); Garner, Frank (Radiation Effects Consulting, Richland, WA); Walters, Leon (Advanced Reactor Concepts, Los Alamos, NM); Wright, Steve; Ott, Larry J. (Oak Ridge National Laboratory, Oak Ridge, TN); Suo-Anttila, Ahti Jorma; Denning, Richard (Ohio State University, Columbus, OH); Ohshima, Hiroyuki (Japan Atomic Energy Agency, Ibaraki, Japan); Ohno, S. (Japan Atomic Energy Agency, Ibaraki, Japan); Miyhara, S. (Japan Atomic Energy Agency, Ibaraki, Japan); Yacout, Abdellatif (Argonne National Laboratory, Argonne, IL); Farmer, M. (Argonne National Laboratory, Argonne, IL); Wade, D. (Argonne National Laboratory, Argonne, IL); Grandy, C. (Argonne National Laboratory, Argonne, IL); Schmidt, R.; Cahalen, J. (Argonne National Laboratory, Argonne, IL); Olivier, Tara Jean; Budnitz, R. (Lawrence Berkeley National Laboratory, Berkeley, CA); Tobita, Yoshiharu (Japan Atomic Energy Agency, Ibaraki, Japan); Serre, Frederic (Centre d' %C3%94etudes nucl%C3%94eaires de Cadarache, Cea, France); Natesan, Ken (Argonne National Laboratory, Argonne, IL); Carbajo, Juan J. (Oak Ridge National Laboratory, Oak Ridge, TN); Jeong, Hae-Yong (Korea Atomic Energy Research Institute, Daejeon, Korea); Wigeland, Roald (Idaho National Laboratory, Idaho Falls, ID); Corradini, Michael (University of Wisconsin-Madison, Madison, WI); Thomas, Justin (Argonne National Laboratory, Argonne, IL); Wei, Tom (Argonne National Laboratory, Argonne, IL); Sofu, Tanju (Argonne National Laboratory, Argonne, IL); Flanagan, George F. (Oak Ridge National Laboratory, Oak Ridge, TN); Bari, R. (Brokhaven National Laboratory, Upton, NY); Porter D. (Idaho National Laboratory, Idaho Falls, ID); Lambert, J. (Argonne National Laboratory, Argonne, IL); Hayes, S. (Idaho National Laboratory, Idaho Falls, ID); Sackett, J. (Idaho National Laboratory, Idaho Falls, ID); Denman, Matthew R.

    2012-05-01

    Expert panels comprised of subject matter experts identified at the U.S. National Laboratories (SNL, ANL, INL, ORNL, LBL, and BNL), universities (University of Wisconsin and Ohio State University), international agencies (IRSN, CEA, JAEA, KAERI, and JRC-IE) and private consultation companies (Radiation Effects Consulting) were assembled to perform a gap analysis for sodium fast reactor licensing. Expert-opinion elicitation was performed to qualitatively assess the current state of sodium fast reactor technologies. Five independent gap analyses were performed resulting in the following topical reports: (1) Accident Initiators and Sequences (i.e., Initiators/Sequences Technology Gap Analysis), (2) Sodium Technology Phenomena (i.e., Advanced Burner Reactor Sodium Technology Gap Analysis), (3) Fuels and Materials (i.e., Sodium Fast Reactor Fuels and Materials: Research Needs), (4) Source Term Characterization (i.e., Advanced Sodium Fast Reactor Accident Source Terms: Research Needs), and (5) Computer Codes and Models (i.e., Sodium Fast Reactor Gaps Analysis of Computer Codes and Models for Accident Analysis and Reactor Safety). Volume II of the Sodium Research Plan consolidates the five gap analysis reports produced by each expert panel, wherein the importance of the identified phenomena and necessities of further experimental research and code development were addressed. The findings from these five reports comprised the basis for the analysis in Sodium Fast Reactor Research Plan Volume I.

  20. Immunobiology of natural killer cells. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Lotzova, E.; Herberman, R.B.

    1986-01-01

    This book provides a review of natural killer (NK) cell-mediated immunity in humans and experimental animal system. Topics for the volume include: In vivo activities of NK cells against primary and metastatic tumors in experimental animals; involvement of NK cells in human malignant disease; impaired NK cell profile in leukemia patients; in vivo modulation of NK activity in cancer patients; implications of aberrant NK cell activity in nonmalignant, chronic diseases; NK cell role in regulation of the growth and functions of hemopoietic and lymphoid cells; NK cells active against viral, bacterial, protozoan, and fungal infections; cytokine secretion and noncytotoxic functions of human large granular lymphocytes; augmentation of NK activity; regulation of NK cell activity by suppressor cells; NK cell cloning technology and characteristics of NK cell clones; comparison of antibody-dependent cellular cytotoxicity (ADCC) and NK activity, and index.

  1. Human Rehabilitation Techniques. Disability Analyses: Chronic Disease Disabilities. Volume II, Part C.

    Science.gov (United States)

    Sigelman, C.; And Others

    Volume II, Section C of a six-volume final report (which covers the findings of a research project on policy and technology related to rehabilitation of disabled individuals) presents a review of literature on six types of chronic disease disabilities--rheumatoid arthritis, coronary heart disease, emphysema, carcinoma of the colon/rectum, kidney…

  2. Human Rehabilitation Techniques. Disability Analyses: Behavioral Disabilities. Volume II, Part B.

    Science.gov (United States)

    Sigelman, C.; And Others

    Volume II, Section B of a six-volume final report (which covers the findings of a research project on policy and technology related to rehabilitation of disabled individuals) presents a review of literature on three types of behavior disabilities--epilepsy, mental retardation, and schizophrenia. Individual chapters on each disability cover the…

  3. The 5th World Congress of chemical engineering: Technologies critical to a changing World. Volume II: Agriculture, food biotechnology biomedical electric power process safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Volume 2 of the proceedings from the 5th World Congress of Chemical Engineering covers four major topic areas from which papers were selected for the database: Agriculture, Food; Biotechnology; Electric Power, and Process Safety. Pertinent subtopics include: Renewable Resource Engineering; Special Processes in the Food Industry; Advances in Metabolite Production; Advances in Fermentation and Cell Culture Engineering; Coal and Nuclear Central Station Power Plants; Large Natural Gas Fired Power Stations; Distributed Generation; Potential Impact of Biomass Energy; and Chemical Hazards in Plant Design. 29 papers were selected from Volume 1 for the database.

  4. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 1. Primary model documentation. Book 1: Chapters I, II, and III

    Energy Technology Data Exchange (ETDEWEB)

    Bohn, R.E.; Herod, J.S.

    1978-06-19

    The model is designed to predict the commercial-market penetration of various energy technologies in the industrial sector out to the year 2000. The model represents the refinement and further development of the Industrial Sector Model developed for the Market Oriented Program Planning Study task force in 1977. The model assesses the comparative economic competitiveness of each technology and then uses these assessments to project each technology's anticipated market penetration. The introductory chapter provides logic and special terminology information of the model. The next sections deal with the input requirements and a discussion of the solution of the model.

  5. Joule II - programme. Clean coal technology R & D; 2nd phase. Volume V. Enhancement of the efficiency of integrated gasification combined cycle (IGCC) power plants

    Energy Technology Data Exchange (ETDEWEB)

    Hein, K.R.G.; Minchener, A.J.; Pruschek, R.; Roberts, P.A. [eds.

    1998-12-31

    Methods of enhancing the efficiency of integrated gasification combined cycle (IGCC) power plants were investigated under the JOULE II extension project JOU2-CT94-0454. These included thermodynamic analysis of measures for efficiency enhancement, and development and design of advanced heat recovery steam generator. All 3 papers have been abstracted separately.

  6. Monitoring and control requirement definition study for dispersed storage and generation (DSG). Volume II. Final report, Appendix A: selected DSG technologies and their general control requirements

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    A major aim of the US National Energy Policy, as well as that of the New York State Energy Research and Development Authority, is to conserve energy and to shift from oil to more abundant domestic fuels and renewable energy sources. Dispersed Storage and Generation (DSG) is the term that characterizes the present and future dispersed, relatively small (<30 MW) energy systems, such as solar thermal electric, photovoltaic, wind, fuel cell, storage battery, hydro, and cogeneration, which can help achieve these national energy goals and can be dispersed throughout the distribution portion of an electric utility system. The purpose of this survey and identification of DSG technologies is to present an understanding of the special characteristics of each of these technologies in sufficient detail so that the physical principles of their operation and the internal control of each technology are evident. In this way, a better appreciation can be obtained of the monitoring and control requirements for these DSGs from a remote distribution dispatch center. A consistent approach is being sought for both hardware and software which will handle the monitoring and control necessary to integrate a number of different DSG technologies into a common distribution dispatch network. From this study it appears that the control of each of the DSG technologies is compatible with a supervisory control method of operation that lends itself to remote control from a distribution dispatch center.

  7. Computer vision technology in log volume inspection

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Log volume inspection is very important in forestry research and paper making engineering. This paper proposed a novel approach based on computer vision technology to cope with log volume inspection. The needed hardware system was analyzed and the details of the inspection algorithms were given. A fuzzy entropy based on image enhancement algorithm was presented for enhancing the image of the cross-section of log. In many practical applications the cross-section is often partially invisible, and this is the major obstacle for correct inspection. To solve this problem, a robust Hausdorff distance method was proposed to recover the whole cross-section. Experiment results showed that this method was efficient.

  8. How to operate an Energy Advisory Service. Volume II. New York Institute of Technology Energy Information Center and Referral Service resource material. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Spak, G.T.

    1978-06-01

    The NYIT Energy Information Center is a comprehensive information service covering every aspect of energy conservation and related technology, including conservation programs and practices, alternative energy systems, energy legislation, and public policy development in the United States and abroad. Materials in the Center can be located through a Card Catalog System and a Vertical File System. The Card Catalog System has entries which organize books and other printed materials according to authors/titles and according to the subject headings developed by the Library of Congress. The Vertical System contains pamphlets, newsclips, reprints, studies, announcements, product specifications and other ephemeral literature, and is organized according to subject headings based on the emerging vocabulary of the energy literature. The key to vertical file resources is the Thesaurus of Descriptors which is given. The Thesaurus includes all subject headings found in the Vertical File as well as other cross referenced terms likely to come to mind when seeking information on a specific energy area.

  9. DEFTEST. Defence Technological and Scientific Thesaurus. Volume 2. M - Z

    Science.gov (United States)

    1988-05-01

    aoo soNO II DRS - SP- 1 (VOL 2) AR- 005 -466 DEFTEST DEFENCE TECHNOLOGICAL AND SCIENTIFIC THESAURUS Volume 2 M-Z 1988 Edition Defence Reports...dim =1.Waf ON Sealoves Offi anwONid mu. Cho ONSMWO Pliqdu INUMMONma~ei ON-lf NT. A" am .NKS emb Co di wf Jet ofl bUSSI nm md Oi e Midib mdi Fade...fa ii IFT N~m adds Pawnrum OtaMl orgaic add CrOMI adds uorm TaY1ears"ls "Takd ugin Serb Tod ca i iPolBaine o lchmif NT n I -~ Sdenm and Technolog Oro

  10. MODERN JAPANESE, A BASIC READER. VOLUME II, JAPANESE TEXTS.

    Science.gov (United States)

    HIBBETT, HOWARD; ITASAKA, GEN

    VOLUME II OF THIS INTRODUCTION TO WRITTEN JAPANESE CONTAINS 60 READING PASSAGES IN JAPANESE SCRIPT TO BE USED WITH THE VOCABULARY AND NOTES IN VOLUME I. THE READINGS ARE GRADED AND HAVE BEEN SELECTED TO REPRESENT GOOD MODERN JAPANESE USAGE. THE BEGINNING LESSONS ARE IN EASY INFORMAL STYLES AND ARE CONCERNED WITH THE JAPANESE LANGUAGE AND CULTURE.…

  11. FY02 Engineering Technology Reports Volume 1: Technology Base

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; Meeker, D

    2003-01-28

    Engineering has touched on every challenge, every accomplishment, and every endeavor of Lawrence Livermore National Laboratory during its fifty-year history. In this time of transition to new leadership, Engineering continues to be central to the mission of the Laboratory, returning to the tradition and core values of E. O. Lawrence: science-based engineering--turning scientific concepts into reality. This volume of Engineering Technical Reports summarizes progress on the projects funded for technology-base efforts. Technology-base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. Objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) the support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; and (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships. Five Centers focus and guide longer-term investments within Engineering. The Centers attract and retain top staff, develop and maintain critical core technologies, and enable programs. Through their technology-base projects, they oversee the application of known engineering approaches and techniques to scientific and technical problems.

  12. Tactical Radar Technology Study. Volume II.

    Science.gov (United States)

    1980-03-01

    sulgested bimoda’l filter liu1.1l’r p levttttoi CIO O P T M I F IL.T IE Bl A N K ’O PEAK I ( itil S,7.7 a 0 111I L AT A\\ I SF’ iCl (U~ ~ ~ F𔄁 * 30’OF F...Erection System 900 lbs Vehicle Stabilization 600 lbs 18824 lbs Payload GSRS 20000 lbs 6 / 6.5.3 MECHANICAL DESIGN TRADEOFFS There are a number of

  13. Blanket comparison and selection study. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    This volume contains extensive data for the following chapters: (1) solid breeder tritium recovery, (2) solid breeder blanket designs, (3) alternate blanket concept screening, and (4) safety analysis. The following appendices are also included: (1) blanket design guidelines, (2) power conversion systems, (3) helium-cooled, vanadium alloy structure blanket design, (4) high wall loading study, and (5) molten salt safety studies. (MOW)

  14. Bibliography of Utah radioactive occurrences. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Doelling, H.H. (comp.)

    1983-07-01

    The references in this bibliography were assembled by reviewing published bibliographies of Utah geology, unpublished reports of the US Geological Survey and the Department of Energy, and various university theses. Each of the listings is cross-referenced by location and subject matter. This report is published in two volumes.

  15. Proceedings of the 1995 U.S. DOE hydrogen program review. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The 1995 US DOE Hydrogen Program Review was held April 18-21, 1995 in Coral Gables, FL. Volume II of the Proceedings contains 8 papers presented under the subject of hydrogen storage and 17 papers presented on hydrogen production. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  16. Preliminary CALS Phase II Architecture. Volume 19

    Science.gov (United States)

    1989-07-03

    IDEF ICAM Definition Languages 5 IDEFO ICAM Definition Language: Activity Modeling IDEFIX ICAM Definition Language: Data Modeling 3 IDS Integrated Design...level. At the Conceptual Description level, data are defined by an integrated semantic data model, such as those produced using the IDEFIX modeling...Architecture with the dominate focus on the data dictionary for the IWSDB, represented by an IDEFIX semantic data model. It is at this level that CALS Phase II

  17. International Photovoltaic Program Plan. Volume II. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Costello, D.; Koontz, R.; Posner, D.; Heiferling, P.; Carpenter, P.; Forman, S.; Perelman, L.

    1979-12-01

    This second volume of a two-part report on the International Photovoltaic Program Plan contains appendices summarizing the results of analyses conducted in preparation of the plan. These analyses include compilations of relevant statutes and existing Federal programs; strategies designed to expand the use of photovoltaics abroad; information on the domestic photovoltaic plan and its impact on the proposed international plan; perspectives on foreign competition; industry views on the international photovoltaic market and ideas about how US government actions could affect this market; international financing issues; and information on issues affecting foreign policy and developing countries.

  18. Engineering Technology Reports, Volume 2: Technology Base FY01

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; Meeker, D

    2002-07-01

    Engineering has touched on every challenge, every accomplishment, and every endeavor of Lawrence Livermore National Laboratory during its fifty-year history. In this time of transition to new leadership, Engineering continues to be central to the mission of the Laboratory, returning to the tradition and core values of E.O. Lawrence: science-based engineering--turning scientific concepts into reality. This volume of Engineering Technical Reports summarizes progress on the projects funded for technology-base efforts. Technology-base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. Objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) the support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships.

  19. National Aviation Fuel Scenario Analysis Program (NAFSAP). Volume I. Model Description. Volume II. User Manual.

    Science.gov (United States)

    1980-03-01

    TESI CHART NATIONAI RUREAt (F ANDA[)Rt 1V4 A NATIONAL. AVIATION ~ FUEL SCENARIO.. ANALYSIS PROGRAM 49!! VOLUM I: MODEL DESCRIA~v 4<C VOLUME II: tr)ER...executes post processor which translates results of the graphics program to machine readable code used by the pen plotter) cr (depressing the carriage

  20. Introduction to "Global Tsunami Science: Past and Future, Volume II"

    Science.gov (United States)

    Rabinovich, Alexander B.; Fritz, Hermann M.; Tanioka, Yuichiro; Geist, Eric L.

    2017-08-01

    Twenty-two papers on the study of tsunamis are included in Volume II of the PAGEOPH topical issue "Global Tsunami Science: Past and Future". Volume I of this topical issue was published as PAGEOPH, vol. 173, No. 12, 2016 (Eds., E. L. Geist, H. M. Fritz, A. B. Rabinovich, and Y. Tanioka). Three papers in Volume II focus on details of the 2011 and 2016 tsunami-generating earthquakes offshore of Tohoku, Japan. The next six papers describe important case studies and observations of recent and historical events. Four papers related to tsunami hazard assessment are followed by three papers on tsunami hydrodynamics and numerical modelling. Three papers discuss problems of tsunami warning and real-time forecasting. The final set of three papers importantly investigates tsunamis generated by non-seismic sources: volcanic explosions, landslides, and meteorological disturbances. Collectively, this volume highlights contemporary trends in global tsunami research, both fundamental and applied toward hazard assessment and mitigation.

  1. Augmented Fish Health Monitoring; Volume II of II, Completion Report.

    Energy Technology Data Exchange (ETDEWEB)

    Michak, Patty

    1991-12-01

    The Bonneville Power Administration (BPA) initiated the Augmented Fish Health Monitoring project in 1986. This project was a five year interagency project involving fish rearing agencies in the Columbia Basin. Participating agencies included: Washington Department of Fisheries (WDF), Oregon Department of Fish and Wildlife, Idaho Department of Fish and Game, and the US Fish and Wildlife Service (USFWS). This is the final data report for the Augmented Fish Health Monitoring project. Data collected and sampling results for 1990 and 1991 are presented within this report. An evaluation of this project can be found in Augmented Fish Health Monitoring, Volume 1, Completion Report.'' May, 1991. Pathogen detection methods remained the same from methods described in Augmented Fish Health Monitoring, Annual Report 1989,'' May, 1990. From January 1, 1990 to June 30, 1991 fish health monitoring sampling was conducted. In 1990 21 returning adult stocks were sampled. Juvenile pre-release exams were completed on 20 yearling releases, and 13 sub-yearling releases in 1990. In 1991 17 yearling releases and 11 sub-yearling releases were examined. Midterm sampling was completed on 19 stocks in 1990. Organosomatic analysis was performed at release on index station stocks; Cowlitz spring and fall chinook, Lewis river early coho and Lyons Ferry fall chinook.

  2. Mod II engine and technology development

    Science.gov (United States)

    Ernst, W. D.

    1984-01-01

    The second-generation automotive Stirling engine, known as the Mod II, will be used to accomplish the Automotive Stirling Engine (ASE) Program objectives. Preliminary design has advanced to the point of procuring long-lead components to evaluate manufacturability. The heater head castings of the Hot Engine System (working gas cycle) are being procured, while the V-block casting of the Cold Engine/Drive system is being sectioned for evaluation. The technology required for these designs, and their impact on Mod II performance, have progressed to the design substantiation stage, and successful accomplishment of the program objectives is expected.

  3. Listening to PS II: enthalpy, entropy, and volume changes.

    Science.gov (United States)

    Hou, Harvey J M; Mauzerall, David

    2011-01-01

    Photosystem II, located in the thylakoid membranes of green plants, algae, and cyanobacteria, uses sunlight to split water into protons, electrons, and a dioxygen molecule. The mechanism of its electron transfers and oxygen evolution including the structure of the protein and rates of the S-state cycle has been extensively investigated. Substantial progress has been made; however, the thermodynamics of PS II electron transfer and of the oxygen cycle are poorly understood. Recent progress in thermodynamic measurements in photosynthesis provides novel insights on the enthalpic and entropic contribution to electron transfer in proteins. In this review the thermodynamic parameters including quantum yield, enthalpy, entropy, and volume changes of PS II photochemistry determined by photoacoustics and other laser techniques are summarized and evaluated. Light-driven volume changes via electrostriction are directly related to the photoreaction in PS II and thus can be a useful measurement of PS II activity and function. The enthalpy changes of the reactions observed can be directly measured by photoacoustics. The apparent reaction entropy can also be estimated when the free energy is known. Dissecting the free energy of a photoreaction into enthalpic and entropic components provides critical information about mechanisms of PS II function. Potential limitations and future direction of the study of the thermodynamics of PS II electron transfer and oxygen evolution are presented.

  4. National Environmental Policy Act compliance guide. Volume II (reference book)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    This document (Volume II of the National Environmental Policy Act Compliance Guide) contains current copies of regulations and guidance from the Council on Environmental Quality, the Department of Energy, the Department of State, and the Environmental Protection Agency, related to compliance with the National Environmental Policy Act of 1969 (NEPA).

  5. Tokamak experimental power reactor conceptual design. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    1976-08-01

    Volume II contains the following appendices: (1) summary of EPR design parameters, (2) impurity control, (3) plasma computational models, (4) structural support system, (5) materials considerations for the primary energy conversion system, (6) magnetics, (7) neutronics penetration analysis, (8) first wall stress analysis, (9) enrichment of isotopes of hydrogen by cryogenic distillation, and (10) noncircular plasma considerations. (MOW)

  6. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    Volume IV of the ISTUM documentation gives information on the individual technology specifications, but relates closely with Chapter II of Volume I. The emphasis in that chapter is on providing an overview of where each technology fits into the general-model logic. Volume IV presents the actual cost structure and specification of every technology modeled in ISTUM. The first chapter presents a general overview of the ISTUM technology data base. It includes an explanation of the data base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters are devoted to documenting the specific-technology cost specifications. Technologies included are: conventional technologies (boiler and non-boiler conventional technologies); fossil-energy technologies (atmospheric fluidized bed combustion, low Btu coal and medium Btu coal gasification); cogeneration (steam, machine drive, and electrolytic service sectors); and solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies), and conservation technologies.

  7. Draft Site Treatment Plan (DSTP), Volumes I and II

    Energy Technology Data Exchange (ETDEWEB)

    D`Amelio, J.

    1994-08-30

    Site Treatment Plans (STP) are required for facilities at which the DOE generates or stores mixed waste. This Draft Site Treatment Plan (DSTP) the second step in a three-phase process, identifies the currently preferred options for treating mixed waste at the Savannah River Site (SRS) or for developing treatment technologies where technologies do not exist or need modification. The DSTP reflects site-specific preferred options, developed with the state`s input and based on existing available information. To the extent possible, the DSTP identifies specific treatment facilities for treating the mixed waste and proposes schedules. Where the selection of specific treatment facilities is not possible, schedules for alternative activities such as waste characterization and technology assessment are provided. All schedule and cost information presented is preliminary and is subject to change. The DSTP is comprised of two volumes: this Compliance Plan Volume and the Background Volume. This Compliance Plan Volume proposes overall schedules with target dates for achieving compliance with the land disposal restrictions (LDR) of RCRA and procedures for converting the target dates into milestones to be enforced under the Order. The more detailed discussion of the options contained in the Background Volume is provided for informational purposes only.

  8. S-1 project. Volume II. Hardware. 1979 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    This volume includes highlights of the design of the Mark IIA uniprocessor (SMI-2), and the SCALD II user's manual. SCALD (structured computer-aided logic design system) cuts the cost and time required to design logic by letting the logic designer express ideas as naturally as possible, and by eliminating as many errors as possible - through consistency checking, simulation, and timing verification - before the hardware is built. (GHT)

  9. Mechanical Behaviour of Materials Volume II Fracture Mechanics and Damage

    CERN Document Server

    François, Dominique; Zaoui, André

    2013-01-01

    Designing new structural materials, extending lifetimes and guarding against fracture in service are among the preoccupations of engineers, and to deal with these they need to have command of the mechanics of material behaviour. This ought to reflect in the training of students. In this respect, the first volume of this work deals with elastic, elastoplastic, elastoviscoplastic and viscoelastic behaviours; this second volume continues with fracture mechanics and damage, and with contact mechanics, friction and wear. As in Volume I, the treatment links the active mechanisms on the microscopic scale and the laws of macroscopic behaviour. Chapter I is an introduction to the various damage phenomena. Chapter II gives the essential of fracture mechanics. Chapter III is devoted to brittle fracture, chapter IV to ductile fracture and chapter V to the brittle-ductile transition. Chapter VI is a survey of fatigue damage. Chapter VII is devoted to hydogen embrittlement and to environment assisted cracking, chapter VIII...

  10. Educational Media and Technology Yearbook, 1992. Volume 18.

    Science.gov (United States)

    Ely, Donald P., Ed.; Minor, Barbara B., Ed.

    The Educational Media and Technology Yearbook (EMTY) is designed to provide media and instructional technology professionals with an up-to-date, single-source overview and assessment of the field of educational technology. Each volume addresses current issues, notes trends, and provides current listings of and background information about the…

  11. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-19

    This volume of the 4-volume ISTUM documentation gives information on the individual technology specifications. The first chapter presents a general overview of the ISTUM technology data bases. It includes an explanation of the data-base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters document the specific-technology-cost specifications. Boiler technologies (conventional coal steam, conventional natural gas and oil in the steam-service sector, black liquor and wood boilers, and space-heat service sector) and non-boiler conventional technologies (natural gas non-boiler, oil-fired non-boiler, coal-fired non-boiler technologies and non-boiler primary system costs) are covered in Chapter II. Chapter III, Fossil Energy Technologies, covers atmospheric fluidized-bed combustion, low-Btu gasification of coal, and medium-Btu gasification. Chapter IV, Cogeneration and Self-Generation Technologies, covers the steam service sector, machine-drive service sector, and electrolytic service sector. Solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies) are covered in Chapter V, while Chapter VI covers conservation technologies. (MCW)

  12. Computer technology -- 1996: Applications and methodology. PVP-Volume 326

    Energy Technology Data Exchange (ETDEWEB)

    Hulbert, G.M. [ed.] [Univ. of Michigan, Ann Arbor, MI (United States); Hsu, K.H. [ed.] [Babcock and Wilcox, Barberton, OH (United States); Lee, T.W. [ed.] [FMC Corp., Santa Clara, CA (United States); Nicholas, T. [ed.] [USAF Wright Laboratory, Wright-Patterson AFB, OH (United States)

    1996-12-01

    The primary objective of the Computer Technology Committee of the ASME Pressure Vessels and Piping Division is to promote interest and technical exchange in the field of computer technology, related to the design and analysis of pressure vessels and piping. The topics included in this volume are: analysis of bolted joints; nonlinear analysis, applications and methodology; finite element analysis and applications; and behavior of materials. Separate abstracts were prepared for 23 of the papers in this volume.

  13. Technology transfer from NASA to targeted industries, volume 2

    Science.gov (United States)

    Mccain, Wayne; Schroer, Bernard J.; Souder, William E.; Spann, Mary S.; Watters, Harry; Ziemke, M. Carl

    1993-01-01

    This volume contains the following materials to support Volume 1: (1) Survey of Metal Fabrication Industry in Alabama; (2) Survey of Electronics Manufacturing/Assembly Industry in Alabama; (3) Apparel Modular Manufacturing Simulators; (4) Synopsis of a Stereolithography Project; (5) Transferring Modular Manufacturing Technology to an Apparel Firm; (6) Letters of Support; (7) Fact Sheets; (8) Publications; and (9) One Stop Access to NASA Technology Brochure.

  14. Human choice and climate change. Volume 2: Resources and technology

    Energy Technology Data Exchange (ETDEWEB)

    Raynor, S.; Malone, E. [eds.] [Pacific Northwest National Lab., Richland, WA (United States)

    1998-12-31

    This book is Volume 2 of a four-volume set which assesses social science research that is relevant to global climate change from a wide-ranging interdisciplinary perspective. Attention is focused on resources and technology as they relate to climate change. This series is indispensable reading for scientists and engineers wishing to make an effective contribution to the climate change policy debate.

  15. Minerals Yearbook, volume II, Area Reports—Domestic

    Science.gov (United States)

    ,

    2017-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  16. Recovery of Navy distillate fuel from reclaimed product. Volume II. Literature review

    Energy Technology Data Exchange (ETDEWEB)

    Brinkman, D.W.; Whisman, M.L.

    1984-11-01

    In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). This first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in which experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 references and abstracts. This appendix, because of its volume, has been published separately as Volume 2.

  17. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

  18. Topics in Optical Materials and Device Research - II. Volume I.

    Science.gov (United States)

    1982-01-01

    34Thermochemical Calculations on the LPCVD of Si3N4 and Si02", Solid State Technology, July 1980 pp.63- 68 . (27) C.E. Ryan, "Recommendations for Low...NY (1968). 5) Marcuse , D., "Theory of Dielectric Optical Waveguides", Academic Press, NY (1974). 6) Marcuse , D., J. Opt. Soc. Am. 66, 216 (1976). 25...34 (Plenum, N.Y., 1979); M.D. Rourke, this volume. 2) M. Sodha and A. Ghatak, "Inhomogeneous Optical Waveguides" (Plenum, N.Y., 1977) Chap. 8.3. 3) D. Marcuse

  19. Computer science research and technology volume 3

    CERN Document Server

    Bauer, Janice P

    2011-01-01

    This book presents leading-edge research from across the globe in the field of computer science research, technology and applications. Each contribution has been carefully selected for inclusion based on the significance of the research to this fast-moving and diverse field. Some topics included are: network topology; agile programming; virtualization; and reconfigurable computing.

  20. Oak Ridge K-25 Site Technology Logic Diagram. Volume 2, Technology Logic Diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates envirorunental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. This volume, Volume 2, contains logic diagrams with an index. Volume 3 has been divided into two separate volumes to facilitate handling and use.

  1. Assessment of control technology for stationary sources. Volume I: technical discussion. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Minicucci, D.; Herther, M.; Babb, L.; Kuby, W.

    1980-02-01

    The purpose of this project was to develop a reference document for use by the Air Resources Board, local air pollution control districts, and the U.S. Environmental Protection Agency that describes technological options available for the control of emissions from stationary sources located in California. Control technologies were examined for 10 industry groups and six air pollutants. Volume I, Technical Discussion, includes an overall introduction to the project, descriptions of its major elements, background information for each industry group addressed, and the project bibliography. In Volume II, Control Technology Data Tables, qualitative descriptions of control options for the various sources and quantitative information on control technology cost, efficiency, reliability, energy consumption, other environmental impacts, and application status are presented in tabular format. Also included is a code list that classifies the stationary sources examined by industry, process and emission source.

  2. USAF Advanced Terrestrial Energy Study. Volume 2. Technology Handbook.

    Science.gov (United States)

    1983-04-01

    volume of Stirling svstems hecause the regenerator determines the dimensions of the system envelone. Table 27. STIRLING SYSTEM VOLUME (CUBIC FEET...Rankine Cycles Batteries Gas Turbines Stirling Engines Thermal Energy Storage 20. ABSTRACT (Confilime 4n roere. olde If neo**WY 41011184100140 & Wee bi A...TECHNOLOGY DESCRIPTIONS 13 Diesels, 13 Gas Turbines. 31 Stirlings , 49 Organic Rankine Cycle; 67 Fuel Cells 83 Photovoltaic Energy Conversion System, 102 Wind

  3. Savannah River Site Approved Site Treatment Plan, 2001 Annual Update (Volumes I and II)

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, B.

    2001-04-30

    The Compliance Plan Volume (Volume I) identifies project activity scheduled milestones for achieving compliance with Land Disposal Restrictions. Information regarding the technical evaluation of treatment options for SRS mixed wastes is contained in the Background Volume (Volume II) and is provided for information.

  4. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

  5. The African Experience. Volume I: Syllabus Lectures; Volume II: Bibliographic References; Volume IIIA: Introductory Essays; Volume IIIB: Introductory Essays.

    Science.gov (United States)

    Paden, John N.; Soja, Edward W.

    In response to demands for more and better teaching about Africa in American higher education, the US Office of Education requested that the Program of African Studies at Northwestern University generate a set of teaching materials which could be used in introductory undergraduate courses. Included in these volumes, these materials provide…

  6. Energy Storage (II): Developing Advanced Technologies

    Science.gov (United States)

    Robinson, Arthur L

    1974-01-01

    Energy storage, considered by some scientists to be the best technological and economic advancement after advanced nuclear power, still rates only modest funding for research concerning the development of advanced technologies. (PEB)

  7. Engineering Technology Reports, Volume 2: Technology Base FY00

    Energy Technology Data Exchange (ETDEWEB)

    Baron, A L; Langland, R T; Minichino, C

    2001-10-03

    In FY-2000, Engineering at Lawrence Livermore National Laboratory faced significant pressures to meet critical project milestones, and immediate demands to facilitate the reassignment of employees as the National Ignition Facility (the 600-TW laser facility being designed and built at Livermore, and one of the largest R&D construction projects in the world) was in the process of re-baselining its plan while executing full-speed its technology development efforts. This drive for change occurred as an unprecedented level of management and program changes were occurring within LLNL. I am pleased to report that we met many key milestones and achieved numerous technological breakthroughs. This report summarizes our efforts to perform feasibility and reduce-to-practice studies, demonstrations, and/or techniques--as structured through our technology centers. Whether using computational engineering to predict how giant structures like suspension bridges will respond to massive earthquakes or devising a suitcase-sized microtool to detect chemical and biological agents used by terrorists, we have made solid technical progress. Five Centers focus and guide longer-term investments within Engineering, as well as impact all of LLNL. Each Center is responsible for the vitality and growth of the core technologies it represents. My goal is that each Center will be recognized on an international scale for solving compelling national problems requiring breakthrough innovation. The Centers and their leaders are as follows: Center for Complex Distributed Systems--David B. McCallen; Center for Computational Engineering--Kyran D. Mish; Center for Microtechnology--Raymond P. Mariella, Jr.; Center for Nondestructive Characterization--Harry E. Martz, Jr.; and Center for Precision Engineering--Keith Carlisle.

  8. Air Conditioning and Heating Technology--II.

    Science.gov (United States)

    Gattone, Felix

    Twenty-eight chapters and numerous drawings provide information for instructors and students of air conditioning and heating technology. Chapter 1 lists the occupational opportunities in the field. Chapter 2 covers the background or development of the industry of air conditioning and heating technology. Chapter 3 includes some of the principle…

  9. Air Conditioning and Heating Technology--II.

    Science.gov (United States)

    Gattone, Felix

    Twenty-eight chapters and numerous drawings provide information for instructors and students of air conditioning and heating technology. Chapter 1 lists the occupational opportunities in the field. Chapter 2 covers the background or development of the industry of air conditioning and heating technology. Chapter 3 includes some of the principle…

  10. Technology Refresh Program Launches Phase II | Poster

    Science.gov (United States)

    The Technology Refresh Program (TRP) is an NCI-funded initiative designed to promote efficient spending on computer equipment by providing staff members with access to the latest technology to meet their computing needs, said Kyle Miller, IT coordinator, Computer and Statistical Services (C&SS), NCI at Frederick.

  11. Oak Ridge K-25 Site Technology Logic Diagram. Volume 1, Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. This Volume, Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume is divided into ten chapters. The first chapter is a brief introduction, and the second chapter details the technical approach of the TLD. These categories are the work activities necessary for successful decontamination and decommissioning, waste management, and remedial action of the K-25 Site. The categories are characterization, decontamination, dismantlement, robotics and automation, remedial action, and waste management. Materials disposition is addressed in Chap. 9. The final chapter contains regulatory compliance information concerning waste management, remedial action, and decontamination and decommissioning.

  12. Oak Ridge National Laboratory Technology Logic Diagram. Volume 2, Technology Logic Diagram: Part B, Remedial Action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Part A of Vols. 1. and 2 focuses on D&D. Part B of Vols. 1 and 2 focuses on the RA of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 (Pts. A, B, and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A, B, and C) contains the TLD data sheets. Remedial action is the focus of Vol. 2, Pt. B, which has been divided into the three necessary subelements of the RA: characterization, RA, and robotics and automation. Each of these sections address general ORNL problems, which are then broken down by problem area/constituents and linked to potential remedial technologies. The diagrams also contain summary information about a technology`s status, its science and technology needs, and its implementation needs.

  13. A Technology Assessment of Personal Computers. Vol. II: Personal Computer Technology, Users, and Uses.

    Science.gov (United States)

    Nilles, Jack M.

    This volume reports on the initial phase of a technology assessment of personal computers. First, technological developments that will influence the rate of diffusion of personal computer technology among the general populace are examined. Then the probable market for personal computers is estimated and analyzed on a functional basis, segregating…

  14. Multi-Rate Digital Control Systems with Simulation Applications. Volume II. Computer Algorithms

    Science.gov (United States)

    1980-09-01

    34 ~AFWAL-TR-80-31 01 • • Volume II L IL MULTI-RATE DIGITAL CONTROL SYSTEMS WITH SIMULATiON APPLICATIONS Volume II: Computer Algorithms DENNIS G. J...29 Ma -8 - Volume II. Computer Algorithms ~ / ’+ 44MWLxkQT N Uwe ~~ 4 ~jjskYIF336l5-79-C-369~ 9. PER~rORMING ORGANIZATION NAME AND ADDRESS IPROG AMEL...additional options. The analytical basis for the computer algorithms is discussed in Ref. 12. However, to provide a complete description of the program, some

  15. Coal liquefaction: A research and development needs assessment: Final report, Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Schindler, H.D.; Burke, F.P.; Chao, K.C.; Davis, B.H.; Gorbaty, M.L.; Klier, K.; Kruse, C.W.; Larsen, J.W.; Lumpkin, R.E.; McIlwain, M.E.; Wender, I.; Stewart, N.

    1989-03-01

    Volume II of this report on an assessment of research needs for coal liquefaction contains reviews of the five liquefaction technologies---direct, indirect, pyrolysis, coprocessing, and bioconversion. These reviews are not meant to be encyclopedic; several outstanding reviews of liquefaction have appeared in recent years and the reader is referred to these whenever applicable. Instead, these chapters contain reviews of selected topics that serve to support the panel's recommendations or to illustrate recent accomplishments, work in progress, or areas of major research interest. At the beginning of each of these chapters is a brief introduction and a summary of the most important research recommendations brought out during the panel discussions and supported by the material presented in the review. A review of liquefaction developments outside the US is included. 594 refs., 100 figs., 60 tabs.

  16. Industrial Maintenance, Volume II-B. Post Secondary Curriculum Guide.

    Science.gov (United States)

    Butler, Raymond H.; And Others

    This volume is the third of four volumes that comprise a curriculum guide for a postsecondary industrial maintenance program. It contains part of section 3 of the guide which contains the unit guides for 10 of the 12 duties included in the course. Each of the 247 tasks included in these 10 duties is presented on a separate page and contains the…

  17. Industrial Maintenance, Volume II-A. Post Secondary Curriculum Guide.

    Science.gov (United States)

    Butler, Raymond H.; And Others

    This volume is the second of four volumes that comprise a curriculum guide for a postsecondary industrial maintenance program. It contains part of section 3 of the guide which contains the unit guides for two of the 12 duties included in the course. Each of the 197 tasks included in these two duties is presented on a separate page and contains the…

  18. Heavy Duty Mechanics Apprenticeship Training, Module One. Volume II.

    Science.gov (United States)

    Batchelor, Leslie A.; Abercrombie, Richard, Ed.

    This training manual, the second of two volumes, comprises the final three blocks in a nine-block in-service training course for apprentices working in heavy duty mechanics. Addressed in the individual blocks included in this volume are engines, basic electricity, and winches. Each block contains a section on parts theory that gives the purpose,…

  19. La Experiencia Mexicana (The Mexican Experience). Volumes I and II.

    Science.gov (United States)

    Finer, Neal B.

    Designed to be used as part of a comprehensive social studies program on Mexican culture, this two-volume manual, written in Spanish, offers an instructional package on Mexican culture, stressing an art-architecture perspective, which can be used at the secondary, college and adult levels. The teacher's guide, Volume I, includes a discussion of a…

  20. Preliminary feasibility study on storage of radioactive wastes in Columbia River basalts. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    ,

    1976-11-01

    Volume II comprises four appendices: analytical data and sample locations for basalt flow type localities; Analytical data and sample locations for measured field sections in Yakima basalts; core hole lithology and analytical data; and geophysical logs. (LK)

  1. Type II superlattice technology for LWIR detectors

    Science.gov (United States)

    Klipstein, P. C.; Avnon, E.; Azulai, D.; Benny, Y.; Fraenkel, R.; Glozman, A.; Hojman, E.; Klin, O.; Krasovitsky, L.; Langof, L.; Lukomsky, I.; Nitzani, M.; Shtrichman, I.; Rappaport, N.; Snapi, N.; Weiss, E.; Tuito, A.

    2016-05-01

    SCD has developed a range of advanced infrared detectors based on III-V semiconductor heterostructures grown on GaSb. The XBn/XBp family of barrier detectors enables diffusion limited dark currents, comparable with MCT Rule-07, and high quantum efficiencies. This work describes some of the technical challenges that were overcome, and the ultimate performance that was finally achieved, for SCD's new 15 μm pitch "Pelican-D LW" type II superlattice (T2SL) XBp array detector. This detector is the first of SCD's line of high performance two dimensional arrays working in the LWIR spectral range, and was designed with a ~9.3 micron cut-off wavelength and a format of 640 x 512 pixels. It contains InAs/GaSb and InAs/AlSb T2SLs, engineered using k • p modeling of the energy bands and photo-response. The wafers are grown by molecular beam epitaxy and are fabricated into Focal Plane Array (FPA) detectors using standard FPA processes, including wet and dry etching, indium bump hybridization, under-fill, and back-side polishing. The FPA has a quantum efficiency of nearly 50%, and operates at 77 K and F/2.7 with background limited performance. The pixel operability of the FPA is above 99% and it exhibits a stable residual non uniformity (RNU) of better than 0.04% of the dynamic range. The FPA uses a new digital read-out integrated circuit (ROIC), and the complete detector closely follows the interfaces of SCD's MWIR Pelican-D detector. The Pelican- D LW detector is now in the final stages of qualification and transfer to production, with first prototypes already integrated into new electro-optical systems.

  2. Technology transfer package on seismic base isolation - Volume I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume I contains the proceedings of the Workshop on Seismic Base Isolation for Department of Energy Facilities held in Marina Del Rey, California, May 13-15, 1992.

  3. Technology Directions for the 21st Century, volume 1

    Science.gov (United States)

    Crimi, Giles F.; Verheggen, Henry; McIntosh, William; Botta, Robert

    1996-01-01

    For several decades, semiconductor device density and performance have been doubling about every 18 months (Moore's Law). With present photolithography techniques, this rate can continue for only about another 10 years. Continued improvement will need to rely on newer technologies. Transition from the current micron range for transistor size to the nanometer range will permit Moore's Law to operate well beyond 10 years. The technologies that will enable this extension include: single-electron transistors; quantum well devices; spin transistors; and nanotechnology and molecular engineering. Continuation of Moore's Law will rely on huge capital investments for manufacture as well as on new technologies. Much will depend on the fortunes of Intel, the premier chip manufacturer, which, in turn, depend on the development of mass-market applications and volume sales for chips of higher and higher density. The technology drivers are seen by different forecasters to include video/multimedia applications, digital signal processing, and business automation. Moore's Law will affect NASA in the areas of communications and space technology by reducing size and power requirements for data processing and data fusion functions to be performed onboard spacecraft. In addition, NASA will have the opportunity to be a pioneering contributor to nanotechnology research without incurring huge expenses.

  4. A framework for evaluation of technology transfer programs. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    The objective of this volume is to describe a framework with which DOE can develop a program specific methodology to evaluate it`s technology transfer efforts. This approach could also be applied to an integrated private sector technology transfer organization. Several benefits will be realized from the application of this work. While the immediate effect will be to assist program managers in evaluating and improving program performance, the ultimate benefits will accrue to the producing industry, the states, and the nation in the form of sustained or increased domestic oil production. This benefit depends also, of course, on the effectiveness of the technology being transferred. The managers of the Technology Transfer program, and the larger federal oil and gas R&D programs, will be provided with a means to design and assess the effectiveness of program efforts as they are developed, tested and performed. The framework allows deficiencies in critical aspects of the program to be quickly identified, allowing for timely corrections and improvements. The actual process of developing the evaluation also gives the staff of the Oil R&D Program or Technology Transfer subprogram the opportunity to become oriented to the overall program goals. The structure and focus imposed by the evaluation paradigm will guide program staff in selecting activities which are consistent with achieving the goals of the overall R&D program.

  5. Atlas of Ohio Aquatic Insects: Volume II, Plecoptera

    Science.gov (United States)

    Grubbs, Scott A.; Armitage, Brian J.; Baumann, Richard W.; Clark, Shawn M.; Bolton, Michael J.

    2016-01-01

    Abstract Background We provide volume II of a distributional atlas of aquatic insects for the eastern USA state of Ohio. This treatment of stoneflies (Plecoptera) is companion to Armitage et al. (2011) on caddisflies (Trichoptera). We build on a recent analysis of Ohio stonefly diversity patterns based on large drainages (DeWalt et al. 2012), but add 3717 new records to the data set. We base most analyses on the United States Geological Survey Hierarchical Unit Code eight (HUC8) drainage scale. In addition to distributional maps for each species, we provide analyses of species richness versus HUC8 drainage area and the number of unique locations in a HUC8 drainage, species richness versus Ohio counties, analyze adult presence phenology throughout the year, and demonstrate stream size range affiliation for each species. New information This work is based on a total of 7797 specimen records gathered from 21 regional museums, agency data, personal collections, and from the literature Table 1. To our knowledge this is the largest stonefly data set available for a similarly sized geopolitical area anywhere in the world. These data are made available as a Darwin Core Archive supported by the Pensoft Integrated Publishing Toolkit (DeWalt et al. 2016b). All known published papers reporting stoneflies from Ohio are detailed in Suppl. material 1. We recovered 102 species from Ohio, including all nine Nearctic families Table 2​. Two species were removed from the DeWalt et al. (2012) list and two new state records added. Perlidae (32 spp.) was most speciose, compared to the low diversity Pteronarcyidae (2 spp.) and Peltoperlidae (1 sp.). The richest HUC8 drainages occurred in northeastern, south-central, and southern regions of the state where drainages were heavily forested, had the highest slopes, and were contained within or adjacent to the unglaciated Allegheny and Appalachian Plateaus. Species poor drainages occurred mainly in the northwestern region where Wisconsinan

  6. People and Technology: Investing in Training for Europe's Future = L'Homme et la Technologie: Investir dans la Formation pour l'Avenir de l'Europe = Menschen und Technologie: Fur Europa's Zukunft in Ausbildung Investieren. Volume II. EUROTECNET Series No. 2.

    Science.gov (United States)

    Commission des Communautes Europeennes (Luxembourg).

    The following papers are included in this volume: "Technological Change: The Future of Training and Work" (Lord Young of Graffham); "L'Education, la Formation et l'Evolution Technologique dans l'Industrie" (Mathias Hinterscheid); "Education, Training, and Technological Change in Industry" (Philippe Meyer);…

  7. Advanced Thermionic Technology Program: summary report. Volume 4. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    This report summarizes the progress made by the Advanced Thermionic Technology Program during the past several years. This Program, sponsored by the US Department of Energy, has had as its goal adapting thermionic devices to generate electricity in a terrestrial (i.e., combustion) environment. Volume 4 (Part E) is a highly technical discussion of the attempts made by the Program to push the state-of-the-art beyond the current generation of converters and is directed toward potential researchers engaged in this same task. These technical discussions are complemented with Appendices where appropriate.

  8. A Curriculum Activities Guide to Water Pollution and Environmental Studies, Volume II - Appendices.

    Science.gov (United States)

    Hershey, John T., Ed.; And Others

    This publication, Volume II of a two volume set of water pollution studies, contains seven appendices which support the studies. Appendix 1, Water Quality Parameters, consolidates the technical aspects of water quality including chemical, biological, computer program, and equipment information. Appendix 2, Implementation, outlines techniques…

  9. A Curriculum Activities Guide to Water Pollution and Environmental Studies, Volume II - Appendices.

    Science.gov (United States)

    Hershey, John T., Ed.; And Others

    This publication, Volume II of a two volume set of water pollution studies, contains seven appendices which support the studies. Appendix 1, Water Quality Parameters, consolidates the technical aspects of water quality including chemical, biological, computer program, and equipment information. Appendix 2, Implementation, outlines techniques…

  10. Emerging Communication Technologies (ECT) Phase 2 Report. Volume 3; Ultra Wideband (UWB) Technology

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Chiodini, Robert; Nelson, Richard A.; Huang, PoTien; Kruhm, David A.

    2003-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Second Generation Reusable Launch Vehicle (2nd Gen RLV), Orbital Space Plane, Advanced Range Technology Working Group (ARTWG) and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures. ECT was a continuation of the Range Information System Management (RISM) task started in 2002. RISM identified the three advance communication technologies investigated under ECT. These were Wireless Ethernet (Wi-Fi), Free Space Optics (FSO), and Ultra Wideband (UWB). Due to the report s size, it has been broken into three volumes: 1) Main Report 2) Appendices 3) UWB

  11. Recent Achievements in Simulated Moving Bed (SMB Technology. Part II

    Directory of Open Access Journals (Sweden)

    Roje, M.

    2010-09-01

    Full Text Available Progress in the method of simulated moving bed (SMB technology and some important achievements in separation of specific classes of racemic compounds of therapeutic interest are reported in the Part I of this review. Part II describes novel methods of SMB technology. Complex technologies,such as the combination of SMB and biocatalytic reactions, and SMB with crystallization process, are presented. VariCol variant of SMB, and its application in the separation of the racemic mixtures of commercial and academic interest are discussed. In the conclusive section, comments are given concerning the economic dimension and the market of enantiomerically pure compounds.

  12. Blade system design studies volume II : preliminary blade designs and recommended test matrix.

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Dayton A. (Global Energy Concepts, LLC, Kirkland, WA)

    2004-06-01

    As part of the U.S. Department of Energy's Wind Partnerships for Advanced Component Technologies (WindPACT) program, Global Energy Concepts, LLC is performing a Blade System Design Study (BSDS) concerning innovations in materials, processes and structural configurations for application to wind turbine blades in the multi-megawatt range. The BSDS Volume I project report addresses issues and constraints identified to scaling conventional blade designs to the megawatt size range, and evaluated candidate materials, manufacturing and design innovations for overcoming and improving large blade economics. The current report (Volume II), presents additional discussion of materials and manufacturing issues for large blades, including a summary of current trends in commercial blade manufacturing. Specifications are then developed to guide the preliminary design of MW-scale blades. Using preliminary design calculations for a 3.0 MW blade, parametric analyses are performed to quantify the potential benefits in stiffness and decreased gravity loading by replacement of a baseline fiberglass spar with carbon-fiberglass hybrid material. Complete preliminary designs are then presented for 3.0 MW and 5.0 MW blades that incorporate fiberglass-to-carbon transitions at mid-span. Based on analysis of these designs, technical issues are identified and discussed. Finally, recommendations are made for composites testing under Part I1 of the BSDS, and the initial planned test matrix for that program is presented.

  13. Western oil-shale development: a technology assessment. Volume 2: technology characterization and production scenarios

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    A technology characterization of processes that may be used in the oil shale industry is presented. The six processes investigated are TOSCO II, Paraho Direct, Union B, Superior, Occidental MIS, and Lurgi-Ruhrgas. A scanario of shale oil production to the 300,000 BPD level by 1990 is developed. (ACR)

  14. From microsystems technology to the Saenger II space transportation system

    Science.gov (United States)

    Vogels, Hanns Arnt

    The role of space projects as drivers and catalysts of technology advances is discussed and illustrated from the perspective of the West German aerospace industry, summarizing a talk presented at the 1986 meeting of the German aerospace society DGLR. The history of space-transportation-system (STS) technology since the 1950s is traced, emphasizing the needs for greater payload weights and lower costs, and the design concept of Saenger II, a proposed two-stage ESA STS employing a hypersonic jet transport aircraft as its first stage, is outlined. It is argued that experience gained in developing the rocket-launched Hermes STS will be applicable to the second stage of Saenger II. Recent developments in microsystems (combining microelectronics, micromechanics, and microoptics), advanced materials (fiber-reinforced plastics, metals, and ceramics), and energy technology (hydrogen-based systems and solar cells) are surveyed, and their applicability to STSs is considered.

  15. Consolidation of Military Pay and Personnel Functions (Copper). Volume II

    Science.gov (United States)

    1978-05-01

    as in any system, the commander and staff must perform their roles in providing information in a timely and accurate manner. a. Concepts pertaining to...feminine genders . Exceptions to this use of the words "he" or "his" will be so noted. 8. RECOMMENDED CHANGES AND COMMENTS. Users of this manual are...II-lO-Aq3 S NO CAH TR TION NCL IN 0’ SECTION 2 co P ? PAGE YES YES II-10-A43 MAKE CORRECTIONS LOG IN OTL SEPARATE DOCUMENTS Orl, OTL DOCUMENTS ORIG

  16. MANUAL: BIOVENTING PRINCIPLES AND PRACTICE VOLUME II. BIOVENTING DESIGN

    Science.gov (United States)

    The results from bioventing research and development efforts and from the pilot-scale bioventing systems have been used to produce this two-volume manual. Although this design manual has been written based on extensive experience with petroleum hydrocarbons (and thus, many exampl...

  17. Environmental law and climate change : Volumes I & II

    NARCIS (Netherlands)

    Verschuuren, Jonathan

    2015-01-01

    Two volume set that brings together 54 of the most influential and important scientific journal articles in the field of climate law, thematically grouped together as follows: introducing climate law, theories and approaches, climate change mitigation, climate change adaptation, climate justice, lia

  18. An Annotated Bibliography on Refugee Mental Health. Volume II.

    Science.gov (United States)

    Peterson, Susan C.; And Others

    The second volume of this annotated bibliography contains primarily materials in published scientific literature on refugee mental health. References have been grouped into five major sections. Section 1, Understanding Refugees in Context, provides important background material in five categories: cultural and related information about different…

  19. Albanian: Basic Course. Volume II, Lessons 17-26.

    Science.gov (United States)

    Defense Language Inst., Monterey, CA.

    This second of ten volumes of audiolingual classroom instruction in Albanian for adult students treats Albanian grammar, syntax, and usage in a series of exercises consisting of grammar perception drills, grammar analysis, readings, question-and-answer exercises, and dialogues illustrating specific grammatical features. A vocabulary list is…

  20. Solar energy research and development: program balance. Annex, Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-02-01

    Each of the seven solar energy technologies that have been assessed in the study are treated: photovoltaic devices, solar thermal power systems, wind energy systems, solar heating and cooling systems, agricultural and industrial heat processes, biomass conversion technologies, and ocean thermal energy conversion systems. A brief technical overview of storage for solar electric technologies is presented and some principles concerning how different levels of success on electrical storage can affect the commercial viability of solar electric options are discussed. A description is given of the solar penetration model that was developed and applied as an analytical tool in the study. This computer model has served the primary purpose of evaluating the competiveness of the solar energy systems in the markets in which they are expected to compete relative to that of the alternative energy sources. This is done under a variety of energy supply, demand, and price conditions. The seven sections treating the solar energy technologies contain discussions on each of six subject areas: description of the technology; economic projections; the potential contribution of the technology in different marketplaces; environmental considerations; international potential; and the present and possible future emphases within the RD and D program. The priority item for each of the technology sections has been the documentation of the economic projections.

  1. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part A, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part A of Volume 3 and contains the Remedial Action section.

  2. Y-12 Plant remedial action Technology Logic Diagram: Volume 3, Technology evaluation data sheets: Part B, Characterization; robotics/automation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Technology Logic Diagram (TLD) was developed to provide a decision-support tool that relates environmental restoration (ER) problems at the Y-12 Plant to potential technologies that can remediate theses problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to remedial action (RA) activities. The TLD consists of three volumes. Volume 1 contains an overview of the TLD, an explanation of the program-specific responsibilities, a review of identified technologies, and the rankings of remedial technologies. Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 contains the TLD data sheets. This report is Part B of Volume 3 and contains the Characterization and Robotics/Automation sections.

  3. Quantitative Indicators for Defense Analysis. Volume II. Technical Report

    Science.gov (United States)

    1975-06-01

    34*"WTOiw«* piB ^ r- ••’ ’ ’■’.WH""" - "«.JH QUAURANT II Hot War JIoL ]War land i Cold I |Criscs War iThreaten ed - Crisis 1...34The Political Analysis of Negotiations," World Politics 26. 3 (April). ^(1971) The Politics of Trade Negotiations Between Africa and the EEC

  4. Commingled uranium-tailings study. Volume II. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-06-30

    Public Law 96-540, Section 213, directs the Secretary of Energy to develop a plan for a cooperative program to provide assistance in the stabilization and management of defense-related uranium mill tailings commingled with other tailings. In developing the plan, the Secretary is further directed to: (1) establish the amount and condition of tailings generated under federal contracts; (2) examine appropriate methodologies for establishing the extent of federal assistance; and (3) consult with the owners and operators of each site. This technical report summarizes US Department of Energy (DOE) and contractor activities in pursuit of items (1), (2), and (3) above. Recommendations regarding policy and a cooperative plan for federal assistance are under separate cover as Volume I.

  5. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part A, Characterization, decontamination, dismantlement

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This report is part A of Volume 3 concerning characterization, decontamination, and dismantlement.

  6. Research Papers Sponsored by the Commission on Private Philanthropy and Public Needs. Volume II: Philanthropic Fields of Interest, Part II-Additional Perspectives.

    Science.gov (United States)

    Department of the Treasury, Washington, DC.

    Twelve papers discuss future changes and trends in philanthropic giving and activities. The report is Volume II, Part II of a five volume series examining the relationship between nonprofit institutions and their donors. The opening paper reviews the needs for better definition of the government's role in contracting and grant making, and for…

  7. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 2. Oil

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 2 contains papers from the following sessions: residual oil determination; thermal methods; heavy oil-tar sands; technology transfer; and carbon dioxide flooding. Individual papers were processed.

  8. Critical Infrastructure Protection II, The International Federation for Information Processing, Volume 290.

    Science.gov (United States)

    Papa, Mauricio; Shenoi, Sujeet

    The information infrastructure -- comprising computers, embedded devices, networks and software systems -- is vital to day-to-day operations in every sector: information and telecommunications, banking and finance, energy, chemicals and hazardous materials, agriculture, food, water, public health, emergency services, transportation, postal and shipping, government and defense. Global business and industry, governments, indeed society itself, cannot function effectively if major components of the critical information infrastructure are degraded, disabled or destroyed. Critical Infrastructure Protection II describes original research results and innovative applications in the interdisciplinary field of critical infrastructure protection. Also, it highlights the importance of weaving science, technology and policy in crafting sophisticated, yet practical, solutions that will help secure information, computer and network assets in the various critical infrastructure sectors. Areas of coverage include: - Themes and Issues - Infrastructure Security - Control Systems Security - Security Strategies - Infrastructure Interdependencies - Infrastructure Modeling and Simulation This book is the second volume in the annual series produced by the International Federation for Information Processing (IFIP) Working Group 11.10 on Critical Infrastructure Protection, an international community of scientists, engineers, practitioners and policy makers dedicated to advancing research, development and implementation efforts focused on infrastructure protection. The book contains a selection of twenty edited papers from the Second Annual IFIP WG 11.10 International Conference on Critical Infrastructure Protection held at George Mason University, Arlington, Virginia, USA in the spring of 2008.

  9. Condylar volume and condylar area in class I, class II and class III young adult subjects

    Directory of Open Access Journals (Sweden)

    Saccucci Matteo

    2012-12-01

    Full Text Available Abstract Aim Aim of this study was to compare the volume and the shape of mandibular condyles in a Caucasian young adult population, with different skeletal pattern. Material and methods 200 Caucasian patients (15–30 years old, 95 male and 105 females were classified in three groups on the base of ANB angle: skeletal class I (65 patients, skeletal class II (70 patients and skeletal class III (65 patients. Left and right TMJs of each subject were evaluated independently with CBCT (Iluma. TMJ evaluation included: condylar volume; condylar area; morphological index (MI. Condylar volumes were calculated by using the Mimics software. The condylar volume, the area and the morphological index (MI were compared among the three groups, by using non-parametric tests. Results The Kruskal-Wallis test and the Mann Whitney test revealed that: no significant difference was observed in the whole sample between the right and the left condylar volume; subjects in skeletal class III showed a significantly higher condylar volume, respect to class I and class II subjects (p 3 in males and 663.5 ± 81.3 mm3 in females; p 2 in males and 389.76 ± 61.15 mm2 in females; p  Conclusion Skeletal class appeared to be associated to the mandibular condylar volume and to the mandibular condylar area in the Caucasian orthodontic population.

  10. Final Technical Report - Kotzebue Wind Power Project - Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Rana Zucchi, Global Energy Concepts, LLC; Brad Reeve, Kotzebue Electric Association; DOE Project Officer - Doug Hooker

    2007-10-31

    The Kotzebue Wind Power Project is a joint undertaking of the U.S. Department of Energy (DOE); Kotzebue Electric Association (KEA); and the Alaska Energy Authority (AEA). The goal of the project is to develop, construct, and operate a wind power plant interconnected to a small isolated utility grid in an arctic climate in Northwest Alaska. The primary objective of KEA’s wind energy program is to bring more affordable electricity and jobs to remote Alaskan communities. DOE funding has allowed KEA to develop a multi-faceted approach to meet these objectives that includes wind project planning and development, technology transfer, and community outreach. The first wind turbines were installed in the summer of 1997 and the newest turbines were installed in the spring of 2007. The total installed capacity of the KEA wind power project is 1.16 MW with a total of 17 turbines rated between 65 kW and 100 kW. The operation of the wind power plant has resulted in a wind penetration on the utility system in excess of 35% during periods of low loads. This document and referenced attachments are presented as the final technical report for the U.S. Department of Energy (DOE) grant agreement DE-FG36-97GO10199. Interim deliverables previously submitted are also referenced within this document and where reasonable to do so, specific sections are incorporated in the report or attached as appendices.

  11. Proceedings of the 1984 DOE nuclear reactor and facility safety conference. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    This report is a collection of papers on reactor safety. The report takes the form of proceedings from the 1984 DOE Nuclear Reactor and Facility Safety Conference, Volume II of two. These proceedings cover Safety, Accidents, Training, Task/Job Analysis, Robotics and the Engineering Aspects of Man/Safety interfaces.

  12. Paul Scherrer Institute Scientific Report 1999. Volume II: Life Sciences

    Energy Technology Data Exchange (ETDEWEB)

    Jaussi, Rolf; Gschwend, Beatrice [eds.

    2000-07-01

    The existing activities of the Department of Life Sciences have grown out of the specific know how and the unique experimental possibilities available at PSI. Primarily, these have been and are complex facilities for using particle beams (protons, neutrons) on the one hand and know how in the production, handling and chemistry of radionuclides on the other. The common theme of the department has thus been the study and use of various types of radiation in therapy and diagnostics of human disease and in particular of cancer. The four units active in this area are: The major activity in the Radiation Medicine unit is Proton Therapy, which aims to further develop and optimise the world-wide unique spot scanning facility for irradiating malignant tumours with minimal damage to surrounding healthy tissues, including the established OPTIS program for the treatment of eye tumours. The Centre for Radiopharmaceutical Science represents a joint activity of PSI with the Swiss Federal Institute of Technology (ETHZ) and the University of Zurich. Its major goals are the development of novel tumour targeted radioconjugates for cancer diagnosis and therapy and the production and evaluation of new PET (positron emission tomography) radiotracers for various applications in neuro physiology and drug development. The Institute of Medical Radiobiology analyses questions of the molecular biology of DNA repair. It is a joint activity of PSI and the University of Zurich. The Structural Biology unit is currently being established. A strong in-house research activity in macromolecular crystallography will complement the more user-oriented protein crystallography beam line, which is being built at the Swiss Light Source (SLS). In particular, tumour targeting by molecular vehicles and DNA repair are areas where structural information can provide important insights. Progress in 1999 in these topical areas is described in this report. A list of scientific publications in 1999 is also provided.

  13. Paul Scherrer Institute Scientific Report 2000. Volume II: Life Sciences

    Energy Technology Data Exchange (ETDEWEB)

    Jaussi, Rolf; Gschwend, Beatrice [eds.

    2001-07-01

    The existing activities of the Department of Life Sciences have grown out of the specific know-how and the unique experimental possibilities available at PSI. Primarily, these have been and are complex facilities for using particle beams (protons, neutrons) on the one hand and know-how in the production, handling and chemistry of radionuclides on the other. The common theme of the department has thus been the study and use of various types of radiation in therapy and diagnostics of human disease and in particular of cancer. The four units active in this area are: The major activity in the Radiation Medicine unit is Proton Therapy, which aims to further develop and optimise the world-wide unique spot scanning facility for irradiating malignant tumours with minimal damage to surrounding healthy tissues, including the established OPTIS program for the treatment of eye tumours. The Centre for Radiopharmaceutical Science represents a joint activity of PSI with the Swiss Federal Institute of Technology (ETHZ) and the University of Zurich. Its major goals are the development of novel tumour targeted radioconjugates for cancer diagnosis and therapy and the production and evaluation of new PET (positron emission tomography) radiotracers for various applications in neuro physiology and drug development. The Institute of Medical Radiobiology analyses questions of the molecular biology of DNA repair. It is a joint activity of PSI and the University of Zurich. The newly established Structural Biology group is still in the build-up phase. A strong in-house research activity in macromolecular crystallography will complement the more user-oriented protein crystallography beam line, which is being built at the Swiss Light Source (SLS). In particular, tumour targeting by molecular vehicles and DNA repair are areas where structural information can provide important insights. Progress in 2000 in these topical areas is described in this report. A list of scientific publications in 2000

  14. Paul Scherrer Institut Scientific Report 2001. Volume II: Life Sciences

    Energy Technology Data Exchange (ETDEWEB)

    Jaussi, R.; Gschwend, B. (eds.)

    2002-03-01

    The IMR group investigated some new approaches to tumour therapy. Several candidate molecules for targeting the tumour vasculature have been identified and are being produced for in vivo studies in tumour-bearing mice. The liposome technology is well established in this group and the goal is to produce suitably tagged liposomes for delivering a variety of cytotoxic agents to tumours. The Centre for Radiopharmaceutical Science, a joint venture with the ETH Zurich and the University of Zurich, pursues a number of projects that should eventually lead to novel radiopharmaceuticals for tumour diagnosis and therapy. Functionally, these radioactive drugs consist of a tumour targeting part, a radionuclide and a linking moiety, which stably connects the two. Optimisation of the components and their combination in terms of in vitro and in vivo properties as well as the efficient large-scale production of promising candidates for eventual first clinical trials is a demanding task. The major emphasis is still on using antibodies, antibody derivatives or peptides as tumour targeting vehicles. In collaboration with the Queens Medical Centre Nottingham, the first patients were treated with a {sup 67}Cu labelled antibody targeting bladder carcinomas. When completed, these studies should give us important information on the usefulness of {sup 67}Cu as a therapeutic radionuclide. Neuropeptides such as neurotensin and bombesin are promising starting points for tumour targeting as their receptors are over expressed on certain tumour cells. Presently, the efforts concentrate on preparing for further clinical studies with neurotensin derivatives (diagnosis of pancreatic tumours using {sup 99m}Tc) and further improving the stability and pharmacological properties of bombesin derivatives. In both these projects the ultimate goal is to label the optimised compounds with {sup 186}Re, a therapeutic radionuclide that can be attached in the stable tricarbonyl form which is easily accessible by

  15. HYDRA-II: A hydrothermal analysis computer code: Volume 3, Verification/validation assessments

    Energy Technology Data Exchange (ETDEWEB)

    McCann, R.A.; Lowery, P.S.

    1987-10-01

    HYDRA-II is a hydrothermal computer code capable of three-dimensional analysis of coupled conduction, convection, and thermal radiation problems. This code is especially appropriate for simulating the steady-state performance of spent fuel storage systems. The code has been evaluated for this application for the US Department of Energy's Commercial Spent Fuel Management Program. HYDRA-II provides a finite difference solution in cartesian coordinates to the equations governing the conservation of mass, momentum, and energy. A cylindrical coordinate system may also be used to enclose the cartesian coordinate system. This exterior coordinate system is useful for modeling cylindrical cask bodies. The difference equations for conservation of momentum are enhanced by the incorporation of directional porosities and permeabilities that aid in modeling solid structures whose dimensions may be smaller than the computational mesh. The equation for conservation of energy permits modeling of orthotropic physical properties and film resistances. Several automated procedures are available to model radiation transfer within enclosures and from fuel rod to fuel rod. The documentation of HYDRA-II is presented in three separate volumes. Volume I - Equations and Numerics describes the basic differential equations, illustrates how the difference equations are formulated, and gives the solution procedures employed. Volume II - User's Manual contains code flow charts, discusses the code structure, provides detailed instructions for preparing an input file, and illustrates the operation of the code by means of a model problem. This volume, Volume III - Verification/Validation Assessments, provides a comparison between the analytical solution and the numerical simulation for problems with a known solution. This volume also documents comparisons between the results of simulations of single- and multiassembly storage systems and actual experimental data. 11 refs., 55 figs., 13 tabs.

  16. Improvements in SISCOM II technology; Introduccion de Mejoras Tecnologicas en el SISCOM II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This document is the Final Report for the project Introduccion de Mejoras Tecnologicas en el SISCOM II, or Improvements in SISCOM II Technology. It consists of a brief description of the activities carried out during the project, and several Annexes that explain in a deeper way each result. SISCOM II is the main telemetry system currently in use in the Spanish underground coal mining, but it was developed ten years ago and needed a technological update, which was the objective of this project. The aims of the project were: To develop Hardware and Software for the Out stations currently used (maintenance developments) To design new hardware and software, easier to use in the current and new applications of SISCOM II Both objectives were met, although not in the way originally intended. The main results were: In the field of old Out stations update: A new set of boards for the old Out stations was developed Out station's firmware was updated for the new hardware In the field new hardware and software design: SISCOM II Supervision software was completely rewritten, and now runs under Windows 3.11/Windows 95 (Originally it ran under DOS) A new hardware configuration (the RELIA 2000), easier to assembly, install and reconfigured, together with its firmware, was developed Generally speaking the activities were carried out accordingly to the original schedule, with one exception, due to changes in the market of this type of Systems. Because of the changes, which happened by the end of the project's time span, the structure of the new hardware was somehow different to the original design, although its functionality and performance is similar or even better than those of the original one.

  17. Cyber security evaluation of II&C technologies

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Laboratory (INL), Idaho Falls, ID (United States)

    2014-11-01

    The Light Water Reactor Sustainability (LWRS) Program is a research and development program sponsored by the Department of Energy, which is conducted in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Within the LWRS Program, the Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. The II&C Pathway is conducted by Idaho National Laboratory (INL). Cyber security is a common concern among nuclear utilities and other nuclear industry stakeholders regarding the digital technologies that are being developed under this program. This concern extends to the point of calling into question whether these types of technologies could ever be deployed in nuclear plants given the possibility that the information in them can be compromised and the technologies themselves can potentially be exploited to serve as attack vectors for adversaries. To this end, a cyber security evaluation has been conducted of these technologies to determine whether they constitute a threat beyond what the nuclear plants already manage within their regulatory-required cyber security programs. Specifically, the evaluation is based on NEI 08-09, which is the industry’s template for cyber security programs and evaluations, accepted by the Nuclear Regulatory Commission (NRC) as responsive to the requirements of the nuclear power plant cyber security regulation found in 10 CFR 73.54. The evaluation was conducted by a

  18. Cyber Security Evaluation of II&C Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ken Thomas

    2014-11-01

    The Light Water Reactor Sustainability (LWRS) Program is a research and development program sponsored by the Department of Energy, which is conducted in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. Within the LWRS Program, the Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. The II&C Pathway is conducted by Idaho National Laboratory (INL). Cyber security is a common concern among nuclear utilities and other nuclear industry stakeholders regarding the digital technologies that are being developed under this program. This concern extends to the point of calling into question whether these types of technologies could ever be deployed in nuclear plants given the possibility that the information in them can be compromised and the technologies themselves can potentially be exploited to serve as attack vectors for adversaries. To this end, a cyber security evaluation has been conducted of these technologies to determine whether they constitute a threat beyond what the nuclear plants already manage within their regulatory-required cyber security programs. Specifically, the evaluation is based on NEI 08-09, which is the industry’s template for cyber security programs and evaluations, accepted by the Nuclear Regulatory Commission (NRC) as responsive to the requirements of the nuclear power plant cyber security regulation found in 10 CFR 73.54. The evaluation was conducted by a

  19. Subseabed disposal program annual report, January-December 1980. Volume II. Appendices (principal investigator progress reports). Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Hinga, K.R. (ed.)

    1981-07-01

    Volume II of the sixth annual report describing the progress and evaluating the status of the Subseabed Disposal Program contains the appendices referred to in Volume I, Summary and Status. Because of the length of Volume II, it has been split into two parts for publication purposes. Part 1 contains Appendices A-Q; Part 2 contains Appendices R-MM. Separate abstracts have been prepared for each appendix for inclusion in the Energy Data Base.

  20. Improvements in SISCOM II Technology; Introduccion de Mejoras Tecnologicas en el SISCOM II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This document is the Final Report for the project. Improvements in SISCOM II Technology. It consists of a brief description of the activities carried out during the project, and several Annexes that explain in a deeper way each result. SISCOM II is the main telemetry system currently in use in the Spanish underground coal mining, but it was developed ten years ago and needed a technological update, which was the objective of this project. The aims of the project were: - To develop Hardware and Software for the Outstations currently used (maintenance developments) - To design new hardware and software, easier to use in the current and new applications of SISCOM II Both objectives were met, although not in the way originally intended. The main results were: In the field of old Outstations update: - A new set of boards for the old Outstations was developed - Outstations`s firmware was updated for the new hardware In the field new hardware and software design: - SISCOM II Supervision software was completely rewritten, and now runs under Windows 3.11/Windows 95 (Originally it ran under DOS) - A new hardware configuration (the RELIA 2000), easier to assembly, install and re configure, together with its firmware, was developed Generally speaking the activities were carried out accordingly to the original schedule, with one exception, due to changes in the market of this type of Systems. Because of the changes, which happened by the end of the project`s time span, the structure of the new hardware was somehow different to the original design, although its functionality and performance is similar or even better than those of the original one. (Author)

  1. HYDRA-II: A hydrothermal analysis computer code: Volume 2, User's manual

    Energy Technology Data Exchange (ETDEWEB)

    McCann, R.A.; Lowery, P.S.; Lessor, D.L.

    1987-09-01

    HYDRA-II is a hydrothermal computer code capable of three-dimensional analysis of coupled conduction, convection, and thermal radiation problems. This code is especially appropriate for simulating the steady-state performance of spent fuel storage systems. The code has been evaluated for this application for the US Department of Energy's Commercial Spent Fuel Management Program. HYDRA-II provides a finite-difference solution in cartesian coordinates to the equations governing the conservation of mass, momentum, and energy. A cylindrical coordinate system may also be used to enclose the cartesian coordinate system. This exterior coordinate system is useful for modeling cylindrical cask bodies. The difference equations for conservation of momentum incorporate directional porosities and permeabilities that are available to model solid structures whose dimensions may be smaller than the computational mesh. The equation for conservation of energy permits modeling of orthotropic physical properties and film resistances. Several automated methods are available to model radiation transfer within enclosures and from fuel rod to fuel rod. The documentation of HYDRA-II is presented in three separate volumes. Volume 1 - Equations and Numerics describes the basic differential equations, illustrates how the difference equations are formulated, and gives the solution procedures employed. This volume, Volume 2 - User's Manual, contains code flow charts, discusses the code structure, provides detailed instructions for preparing an input file, and illustrates the operation of the code by means of a sample problem. The final volume, Volume 3 - Verification/Validation Assessments, provides a comparison between the analytical solution and the numerical simulation for problems with a known solution. 6 refs.

  2. National Institute for Petroleum and Energy Research quarterly technical report, July 1--September 30, 1992. Volume 2, Energy production research

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Volume II includes: chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; and microbial technology.

  3. Proceedings of The Twentieth International Symposium on Space Technology and Science. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-31

    The 20th international symposium on space technology and science was held in Nagaragawa city, Gifu prefecture on May 19-25, 1996, and 401 papers were made public. Out of those, 112 papers were summed up as Volume 2 following the previous Volume 1. As to space transportation, the paper included reports titled as follows: Conceptual study of H-IIA rocket (upgraded H-II rocket); Test flight of the launch vehicle; International cooperation in space transportation; etc. Concerning microgravity science, Recent advances in microgravity research; Use of microgravity environment to investigate the effect of magnetic field on flame shape; etc. Relating to satellite communications and broadcasting, `Project GENESYS`: CRL`s R and D project for realizing high data rate satellite communications networks; The Astrolink {sup TM/SM} system; etc. Besides, the paper contained reports on the following fields: lunar and planetary missions and utilization, space science and balloons, earth observations, life science and human presence, international cooperation and space environment, etc

  4. Key technologies and risk management of deep tunnel construction at Jinping II hydropower station

    Directory of Open Access Journals (Sweden)

    Chunsheng Zhang

    2016-08-01

    Full Text Available The four diversion tunnels at Jinping II hydropower station represent the deepest underground project yet conducted in China, with an overburden depth of 1500–2000 m and a maximum depth of 2525 m. The tunnel structure was subjected to a maximum external water pressure of 10.22 MPa and the maximum single-point groundwater inflow of 7.3 m3/s. The success of the project construction was related to numerous challenging issues such as the stability of the rock mass surrounding the deep tunnels, strong rockburst prevention and control, and the treatment of high-pressure, large-volume groundwater infiltration. During the construction period, a series of new technologies was developed for the purpose of risk control in the deep tunnel project. Nondestructive sampling and in-situ measurement technologies were employed to fully characterize the formation and development of excavation damaged zones (EDZs, and to evaluate the mechanical behaviors of deep rocks. The time effect of marble fracture propagation, the brittle–ductile–plastic transition of marble, and the temporal development of rock mass fracture and damage induced by high geostress were characterized. The safe construction of deep tunnels was achieved under a high risk of strong rockburst using active measures, a support system comprised of lining, grouting, and external water pressure reduction techniques that addressed the coupled effect of high geostress, high external water pressure, and a comprehensive early-warning system. A complete set of technologies for the treatment of high-pressure and large-volume groundwater infiltration was developed. Monitoring results indicated that the Jinping II hydropower station has been generally stable since it was put into operation in 2014.

  5. Key technologies and risk management of deep tunnel construction at Jinping II hydropower station

    Institute of Scientific and Technical Information of China (English)

    Chunsheng Zhang; Ning Liu; Weijiang Chu

    2016-01-01

    The four diversion tunnels at Jinping II hydropower station represent the deepest underground project yet conducted in China, with an overburden depth of 1500e2000 m and a maximum depth of 2525 m. The tunnel structure was subjected to a maximum external water pressure of 10.22 MPa and the maximum single-point groundwater inflow of 7.3 m3/s. The success of the project construction was related to numerous challenging issues such as the stability of the rock mass surrounding the deep tunnels, strong rockburst prevention and control, and the treatment of high-pressure, large-volume groundwater infiltration. During the construction period, a series of new technologies was developed for the purpose of risk control in the deep tunnel project. Nondestructive sampling and in-situ measurement technologies were employed to fully characterize the formation and development of excavation damaged zones (EDZs), and to evaluate the mechanical behaviors of deep rocks. The time effect of marble fracture propagation, the brittleeductileeplastic transition of marble, and the temporal development of rock mass fracture and damage induced by high geostress were characterized. The safe construction of deep tunnels was achieved under a high risk of strong rockburst using active measures, a support system comprised of lining, grouting, and external water pressure reduction techniques that addressed the coupled effect of high geostress, high external water pressure, and a comprehensive early-warning system. A complete set of technologies for the treatment of high-pressure and large-volume ground-water infiltration was developed. Monitoring results indicated that the Jinping II hydropower station has been generally stable since it was put into operation in 2014.

  6. A Review of the Definition and Measurement of Poverty: Volume I, Summary Review Paper; Volume II, Annotated Bibliography. The Measure of Poverty, Technical Paper III.

    Science.gov (United States)

    Oster, Sharon; And Others

    This study reviews the existing literature on a series of issues associated with the defintion and measurement of poverty, and it consists of a summary report covering this research (Volume I), and an annotated bibliography (Volume II). Eleven specific issues were identified and reviewed in this study: (1) the historical definitions of poverty,…

  7. PULSE COMBUSTOR DESIGN QUALIFICATION TEST AND CLEAN COAL FEEDSTOCK TEST - VOLUME I AND VOLUME II

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2002-02-08

    For this Cooperative Agreement, the pulse heater module is the technology envelope for an indirectly heated steam reformer. The field of use of the steam reformer pursuant to this Cooperative Agreement with DOE is for the processing of sub-bituminous coals and lignite. The main focus is the mild gasification of such coals for the generation of both fuel gas and char--for the steel industry is the main focus. An alternate market application for the substitution of metallurgical coke is also presented. This project was devoted to qualification of a 253-tube pulse heater module. This module was designed, fabricated, installed, instrumented and tested in a fluidized bed test facility. Several test campaigns were conducted. This larger heater is a 3.5 times scale-up of the previous pulse heaters that had 72 tubes each. The smaller heater has been part of previous pilot field testing of the steam reformer at New Bern, North Carolina. The project also included collection and reduction of mild gasification process data from operation of the process development unit (PDU). The operation of the PDU was aimed at conditions required to produce char (and gas) for the Northshore Steel Operations. Northshore Steel supplied the coal for the process unit tests.

  8. PDC 2016. Proceedings of the 14th Participatory Design Conference - Volume II

    DEFF Research Database (Denmark)

    Participatory Design in an Era of Participation : Introduction to volume 2 Participatory Design is a diverse collection of principles and practices aimed at making technologies, tools, environments, businesses and social institutions more responsive to human needs. A central tenet of Participator...

  9. Flat-panel volume CT: fundamental principles, technology, and applications.

    Science.gov (United States)

    Gupta, Rajiv; Cheung, Arnold C; Bartling, Soenke H; Lisauskas, Jennifer; Grasruck, Michael; Leidecker, Christianne; Schmidt, Bernhard; Flohr, Thomas; Brady, Thomas J

    2008-01-01

    Flat-panel volume computed tomography (CT) systems have an innovative design that allows coverage of a large volume per rotation, fluoroscopic and dynamic imaging, and high spatial resolution that permits visualization of complex human anatomy such as fine temporal bone structures and trabecular bone architecture. In simple terms, flat-panel volume CT scanners can be thought of as conventional multidetector CT scanners in which the detector rows have been replaced by an area detector. The flat-panel detector has wide z-axis coverage that enables imaging of entire organs in one axial acquisition. Its fluoroscopic and angiographic capabilities are useful for intraoperative and vascular applications. Furthermore, the high-volume coverage and continuous rotation of the detector may enable depiction of dynamic processes such as coronary blood flow and whole-brain perfusion. Other applications in which flat-panel volume CT may play a role include small-animal imaging, nondestructive testing in animal survival surgeries, and tissue-engineering experiments. Such versatility has led some to predict that flat-panel volume CT will gain importance in interventional and intraoperative applications, especially in specialties such as cardiac imaging, interventional neuroradiology, orthopedics, and otolaryngology. However, the contrast resolution of flat-panel volume CT is slightly inferior to that of multidetector CT, a higher radiation dose is needed to achieve a comparable signal-to-noise ratio, and a slower scintillator results in a longer scanning time.

  10. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part B, Dismantlement, Remedial action

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  11. Oak Ridge National Laboratory Technology Logic Diagram. Volume 3, Technology evaluation data sheets: Part C, Robotics/automation, Waste management

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Oak Ridge National Laboratory Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates environmental restoration (ER) and waste management (WM) problems at Oak Ridge National Laboratory (ORNL) to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to decontamination and decommissioning (D&D), remedial action (RA), and WM activities. The TLD consists of three fundamentally separate volumes: Vol. 1, Technology Evaluation; Vol. 2, Technology Logic Diagram and Vol. 3, Technology EvaLuation Data Sheets. Part A of Vols. 1 and 2 focuses on RA. Part B of Vols. 1 and 2 focuses on the D&D of contaminated facilities. Part C of Vols. 1 and 2 focuses on WM. Each part of Vol. 1 contains an overview of the TM, an explanation of the problems facing the volume-specific program, a review of identified technologies, and rankings of technologies applicable to the site. Volume 2 (Pts. A. B. and C) contains the logic linkages among EM goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 3 (Pts. A. B, and C) contains the TLD data sheets. This volume provides the technology evaluation data sheets (TEDS) for ER/WM activities (D&D, RA and WM) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than is given for the technologies in Vol. 2.

  12. Simulation model for wind energy storage systems. Volume II. Operation manual. [SIMWEST code

    Energy Technology Data Exchange (ETDEWEB)

    Warren, A.W.; Edsinger, R.W.; Burroughs, J.D.

    1977-08-01

    The effort developed a comprehensive computer program for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic). An acronym for the program is SIMWEST (Simulation Model for Wind Energy Storage). The level of detail of SIMWEST is consistent with a role of evaluating the economic feasibility as well as the general performance of wind energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. Volume II, the SIMWEST operation manual, describes the usage of the SIMWEST program, the design of the library components, and a number of simple example simulations intended to familiarize the user with the program's operation. Volume II also contains a listing of each SIMWEST library subroutine.

  13. Energy extension service pilot program evaluation report: the first year. Volume II: pilot state reports

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    Volume II of the Energy Extension Service Evaluation presents a discussion of the operations of the ten EES pilot-state programs during the period from October 1, 1977 through September 30, 1978. Each of the ten pilot states - Alabama, Connecticut, Michigan, New Mexico, Pennsylvania, Tennessee, Texas, Washington, Wisconsin, and Wyoming - received a grant of approximately $1.1 million to develop and implement a 19-month program beginning on October 1, 1977. Volume II provides a case-study description of the operations of the pilot program in each state, with special attention given to the two programs selected in each state for more detailed study and survey research. Some survey data and analysis are presented for the emphasis programs.

  14. Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.

  15. Inventory of Federal energy-related environment and safety research for FY 1977. Volume II. Project listings

    Energy Technology Data Exchange (ETDEWEB)

    1978-07-01

    This volume contains Biomedical and Environmental Research, Environmental Control Technology Research, and Operational and Environmental Safety Research project listings. The projects are ordered numerically by log number.

  16. Condylar volume and condylar area in class I, class II and class III young adult subjects

    OpenAIRE

    Saccucci Matteo; D’Attilio Michele; Rodolfino Daria; Festa Felice; Polimeni Antonella; Tecco Simona

    2012-01-01

    Abstract Aim Aim of this study was to compare the volume and the shape of mandibular condyles in a Caucasian young adult population, with different skeletal pattern. Material and methods 200 Caucasian patients (15–30 years old, 95 male and 105 females) were classified in three groups on the base of ANB angle: skeletal class I (65 patients), skeletal class II (70 patients) and skeletal class III (65 patients). Left and right TMJs of each subject were evaluated independently with CBCT (Iluma). ...

  17. Results of site validation experiments. Volume II. Supporting documents 5 through 14

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Volume II contains the following supporting documents: Summary of Geologic Mapping of Underground Investigations; Logging of Vertical Coreholes - ''Double Box'' Area and Exploratory Drift; WIPP High Precision Gravity Survey; Basic Data Reports for Drillholes, Brine Content of Facility Internal Strata; Mineralogical Content of Facility Interval Strata; Location and Characterization of Interbedded Materials; Characterization of Aquifers at Shaft Locations; and Permeability of Facility Interval Strate.

  18. Ocean Thermal Energy Conversion (OTEC) test facilities study program. Final report. Volume II. Part A

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-17

    Results are presented of an 8-month study to develop alternative non-site-specific OTEC facilities/platform requirements for an integrated OTEC Test Program which may include land and floating test facilities. The document, Volume II - Appendixes is bound in three parts (A, B, and C) which together comprise a compendium of the most significant detailed data developed during the study. Part A contains definitions, baseline revisions, test plans, and energy utilization sections.

  19. The Major Causes of Cost Growth in Defense Acquisition, Volume II: Main Body

    Science.gov (United States)

    2009-12-01

    Acquisition Volume II: Main Body Gene Porter, Project Leader Brian Gladstone C. Vance Gordon Nicholas Karvonides R. Royce Kneece, Jr. Jay Mandelbaum...Main Body Gene Porter, Project Leader Brian Gladstone C. Vance Gordon Nicholas Karvonides R. Royce Kneece, Jr. Jay Mandelbaum William D. O’Neil iii...information to DoD management on the status of the most important acquisition programs. Since 1969 , Congress has required that the SARs for MDAPs be

  20. Mg II Absorption Characteristics of a Volume-Limited Sample of Galaxies at z ~ 0.1

    Science.gov (United States)

    Barton, Elizabeth J.; Cooke, Jeff

    2009-12-01

    We present an initial survey of Mg II absorption characteristics in the halos of a carefully constructed, volume-limited subsample of galaxies embedded in the spectroscopic part of the Sloan Digital Sky Survey (SDSS). We observed quasars near sightlines to 20 low-redshift (z ~ 0.1), luminous (M r + 5log h background quasar within a projected 75 h -1 kpc of its center, although we preferentially sample galaxies with lower impact parameters and slightly more star formation within this range. Of the observed systems, six exhibit strong (W eq(2796) >= 0.3 Å) Mg II absorption at the galaxy's redshift, six systems have upper limits which preclude strong Mg II absorption, while the remaining observations rule out very strong (W eq(2796) >= 1-2 Å) absorption. The absorbers fall at higher impact parameters than many non-absorber sightlines, indicating a covering fraction fc lsim 0.4 for >=0.3 Å absorbers at z ~ 0.1, even at impact parameters Technology, the University of California, and the National Aeronautics and Space Administration. The Observatory was made possible by the generous financial support of the W. M. Keck Foundation.

  1. Identification of hazards in non-nuclear power plants. Volume II. Phase II

    Energy Technology Data Exchange (ETDEWEB)

    Fell, R.W.

    1979-08-01

    This study extends the Phase I study to also include a hazards evaluation for two new emerging coal power plant technologies: coal fired atmospheric fluidized bed and pressurized fluidized bed power generating systems. The study also considers the sensitivity of the hazards ranking for all the non-nuclear power plants to the effects of population density, mode of plant operation, technical changes, location and environmental (temperature) effects. Information is provided under the following section headings: background; environmental and public health concerns associated with fluidized-bed combustion power plants; description of a conceptual atmospheric fluidized-bed power plant; pressurized fluidized-bed combustion combined cycle (PFBCC) power plant; hazard ranking and risk assessment for non-nuclear power plants; and, hazards sensitivity analysis.

  2. Clean Coal Technology Programs: Program Update 2003 (Volume 1)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  3. Clean Coal Technology Programs: Completed Projects (Volume 2)

    Energy Technology Data Exchange (ETDEWEB)

    Assistant Secretary for Fossil Energy

    2003-12-01

    Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

  4. Recent Progress in Data Engineering and Internet Technology Volume 1

    CERN Document Server

    Gaol, Ford Lumban

    2013-01-01

    The latest inventions in internet technology influence most of business and daily activities. Internet security, internet data management, web search, data grids, cloud computing, and web-based applications play vital roles, especially in business and industry, as more transactions go online and mobile. Issues related to ubiquitous computing are becoming critical.   Internet technology and data engineering should reinforce efficiency and effectiveness of business processes. These technologies should help people make better and more accurate decisions by presenting necessary information and possible consequences for the decisions. Intelligent information systems should help us better understand and manage information with ubiquitous data repository and cloud computing.   This book is a compilation of some recent research findings in Internet Technology and Data Engineering. This book provides state-of-the-art accounts in computational algorithms/tools, database management and database technologies,  intelli...

  5. Recent Progress in Data Engineering and Internet Technology Volume 2

    CERN Document Server

    Gaol, Ford Lumban

    2012-01-01

    The latest inventions in internet technology influence most of business and daily activities. Internet security, internet data management, web search, data grids, cloud computing, and web-based applications play vital roles, especially in business and industry, as more transactions go online and mobile. Issues related to ubiquitous computing are becoming critical.   Internet technology and data engineering should reinforce efficiency and effectiveness of business processes. These technologies should help people make better and more accurate decisions by presenting necessary information and possible consequences for the decisions. Intelligent information systems should help us better understand and manage information with ubiquitous data repository and cloud computing.   This book is a compilation of some recent research findings in Internet Technology and Data Engineering. This book provides state-of-the-art accounts in computational algorithms/tools, database management and database technologies,  intelli...

  6. Hanna, Wyoming underground coal gasification data base. Volume 3. The Hanna II, Phase I field test

    Energy Technology Data Exchange (ETDEWEB)

    Bartke, T.C.; Fischer, D.D.; King, S.B.; Boyd, R.M.; Humphrey, A.E.

    1985-08-01

    This report is part of a seven-volume series on the Hanna, Wyoming, underground coal gasification field tests. Volume 1 is a summary of the project, and each of Volumes 2 through 6 describes a particular test. Volume 7 is a compilation of all the data for the tests in Volumes 2 through 6. Hanna II, Phase I was conducted during the spring and summer of 1975, at a site about 700 feet up dip (to the southwest) of the Hanna I test. The test was conducted in two stages - Phase IA and IB. Phase IA consisted of linking and gasification operations between Wells 1 and 3 and Phase IB of linking from the 1-3 gasification zone to Well 2, followed by a short period of gasification from Well 2 to Well 3 over a broad range of air injection rates, in order to determine system turndown capabilities and response times. This report covers: (1) site selection and characteristics; (2) test objectives; (3) facilities description; (4) pre-operational testing; (5) test operations summary; and (6) post-test activity. 7 refs., 11 figs., 8 tabs.

  7. The 5-Year Outlook on Science and Technology 1981. Source Materials Volume 2.

    Science.gov (United States)

    National Science Foundation, Washington, DC.

    This is the second of two volumes of source documents commissioned by the National Science Foundation in preparing the second 5-Year Outlook on Science and Technology for transmission to the Congress. This volume consists of the views of individuals selected by the Committee on Science, Engineering and Public Policy of the American Association for…

  8. Human choice and climate change. Volume 2: Resources and technology

    Energy Technology Data Exchange (ETDEWEB)

    Rayner, S.; Malone, E.L.

    1997-12-31

    Foreward: Preface; Introduction; The natural science of global climate change; Land and water use; Coastal zones and oceans; Energy and industry; Energy and social systems; Technological change; and Sponsoring organizations, International Advisory Board, and project participants.

  9. TECHNOLOGY EVALUATION REPORT: RETECH'S PLASMA CENTRIFUGAL FURNACE - VOLUME I

    Science.gov (United States)

    A demonstration of the Retech, Inc. Plasma Centrifugal Furnace (PCF) was conducted under the Superfund Innovative Technology Evaluation (SITE) Program at the Department of Energy's (DOE's) Component Development and Integration Facility in Butte, Montana. The furnace uses heat gen...

  10. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 6

    Science.gov (United States)

    Lewis, Pattie

    2011-01-01

    QuEST is a publication of the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). This issue contains brief articles on: Risk Identification and Mitigation, Material Management and Substitution Efforts--Hexavalent Chrome-free Coatings and Low volatile organic compounds (VOCs) Coatings, Lead-Free Electronics, Corn-Based Depainting Media; Alternative Energy Efforts Hydrogen Sensors and Solar Air Conditioning. Other TEERM Efforts include: Energy and Water Management and Remediation Technology Collaboration.

  11. Diagnosis of occlusal caries: Part II. Recent diagnostic technologies.

    Science.gov (United States)

    Tam, L E; McComb, D

    2001-09-01

    Accurate diagnosis of the presence or absence of disease is a fundamental requirement in health care. The diagnosis of non-overt occlusal decay is challenging and can be highly subjective, and its inherent uncertainties can lead to widely differing treatment decisions. The purpose of this 2-part paper is to review current knowledge concerning conventional and new diagnostic methods for occlusal caries. Part I looked at established methods for diagnosing occlusal decay. These methods have several limitations, particularly in their ability to diagnose early carious lesions. Part II examines new and emerging technologies that are being developed for the diagnosis of occlusal decay. Electrical conductance measurements and quantitative laser- or light-induced fluorescence represent significant improvements over conventional diagnostic methods, especially for in vitro applications and particularly with regard to sensitivity and reproducibility. Proponents of the DIAGNOdent laser fluorescence system claim that it evaluates the fluorescence that develops when laser light is incident on areas of demineralization. This noninvasive device is simple to use and provides quantitative data. Studies supporting its validity are limited but do suggest good sensitivity and excellent reproducibility. However, the DIAGNOdent system requires more scientific scrutiny. Although it offers a high rate of disease detection, it has little ability to indicate the extent of decay. In all treatment decisions, clinicians must be aware of the limitations of the diagnostic methods that have been used. Clinical judgment based on the patient s case history, visual cues, review of radiographs and probability of disease is still the most important aspect of optimum patient care. New technologies may provide supplemental information, but they cannot yet replace established methods for the diagnosis of occlusal caries.

  12. Army Staff Automated Administrative Support System (ARSTADS) Report. Phase I. Volume II.

    Science.gov (United States)

    1980-07-01

    of administrative technologies. Volume 11 contains specifics on a Isystem -to test-that eanepnt- DO WJIT 43 EDONWOF INOV GOIS @NOLETE Unclassified...correct and edit their material (92%). (3) Eighty-six percent of the administrative personnel reported having to retype papers for aesthetic, editorial or...classified material stored is less than ten percent. (c) most elements use the TAFFS system; however, files are not purged or properly maintained in all

  13. Solid Waste Operations Complex W-113, Detail Design Report (Title II). Volume 1: Title II design report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Solid Waste Retrieval Facility--Phase 1 (Project W113) will provide the infrastructure and the facility required to retrieve from Trench 04, Burial ground 4C, contact handled (CH) drums and boxes at a rate that supports all retrieved TRU waste batching, treatment, storage, and disposal plans. This includes (1) operations related equipment and facilities, viz., a weather enclosure for the trench, retrieval equipment, weighing, venting, obtaining gas samples, overpacking, NDE, NDA, shipment of waste and (2) operations support related facilities, viz., a general office building, a retrieval staff change facility, and infrastructure upgrades such as supply and routing of water, sewer, electrical power, fire protection, roads, and telecommunication. Title I design for the operations related equipment and facilities was performed by Raytheon/BNFL, and that for the operations support related facilities including infrastructure upgrade was performed by KEH. These two scopes were combined into an integrated W113 Title II scope that was performed by Raytheon/BNFL. Volume 1 provides a comprehensive narrative description of the proposed facility and systems, the basis for each of the systems design, and the engineering assessments that were performed to support the technical basis of the Title II design. The intent of the system description presented is to provide WHC an understanding of the facilities and equipment provided and the A/E`s perspective on how these systems will operate.

  14. Hybrid Propulsion Technology Program, phase 1. Volume 1: Executive summary

    Science.gov (United States)

    1989-01-01

    The study program was contracted to evaluate concepts of hybrid propulsion, select the most optimum, and prepare a conceptual design package. Further, this study required preparation of a technology definition package to identify hybrid propulsion enabling technologies and planning to acquire that technology in Phase 2 and demonstrate that technology in Phase 3. Researchers evaluated two design philosophies for Hybrid Rocket Booster (HRB) selection. The first is an ASRM modified hybrid wherein as many components/designs as possible were used from the present Advanced Solid Rocket Motor (ASRM) design. The second was an entirely new hybrid optimized booster using ASRM criteria as a point of departure, i.e., diameter, thrust time curve, launch facilities, and external tank attach points. Researchers selected the new design based on the logic of optimizing a hybrid booster to provide NASA with a next generation vehicle in lieu of an interim advancement over the ASRM. The enabling technologies for hybrid propulsion are applicable to either and vehicle design may be selected at a downstream point (Phase 3) at NASA's discretion. The completion of these studies resulted in ranking the various concepts of boosters from the RSRM to a turbopump fed (TF) hybrid. The scoring resulting from the Figure of Merit (FOM) scoring system clearly shows a natural growth path where the turbopump fed solid liquid staged combustion hybrid provides maximized payload and the highest safety, reliability, and low life cycle costing.

  15. Integrating model of the Project Independence Evaluation System. Volume VI. Data documentation. Part II

    Energy Technology Data Exchange (ETDEWEB)

    Allen, B J

    1979-02-01

    This documentation describes the PIES Integrating Model as it existed on January 1, 1978. This Volume VI of six volumes is data documentation, containing the standard table data used for the Administrator's Report at the beginning of 1978, along with the primary data sources and the office responsible. It also contains a copy of a PIES Integrating Model Report with a description of its content. Following an overview chapter, Chapter II, Supply and Demand Data Tables and Sources for the Mid-range Scenario for Target Years 1985 and 1990, data on demand, price, and elasticity; coal; imports; oil and gas; refineries; synthetics, shale, and solar/geothermal; transportation; and utilities are presented. The following data on alternate scenarios are discussed: low and high demand; low and high oil and gas supply; refinery and oil and gas data assuming a 5% annual increase in real world oil prices. Chapter IV describes the solution output obtained from an execution of PIES.

  16. Hydrocarbonization process evaluation report. Volume II. Evaluation of process feasibility. [49 refs

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, J.M.; Dyslin, D.A.; Edwards, M.S.; Joy, D.S.; Peterson, G.R.

    1977-07-01

    Volume II of a two-volume study concerning the preliminary design and economic evaluation of a Hydrocarbonization Facility includes: (1) a review of the current status of the major processing units, (2) an assessment of operating problems, (3) considerations of possible process alternatives, (4) an evaluation of the overall process feasibility, and (5) recommendations for future process development. Results of the study emphasize the need for testing the evaluated process, which is based on the Clean Coke Process, in a continuous pilot plant using a wide variety of highly caking bituminous coals as feed material. A program suggested for the pilot plant would encompass: (1) development of improved methods for the prevention of agglomeration of highly caking coals during hydrocarbonization, (2) optimization of the yields of coal liquids, (3) investigation of a single-stage high-temperature hydrocarbonizer optimized for char production, and (4) optimization of beneficiation ratios employed during coal preparation.

  17. Second annual clean coal technology conference: Proceedings. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-09

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately.

  18. ICSOFT 2006 : First International Conference on Software and Data Technologies, Volume 1

    NARCIS (Netherlands)

    Filipe, Joaquim; Shishkov, Boris; Helfert, Markus

    2006-01-01

    This volume contains the proceedings of the first International Conference on Software and Data Technologies (ICSOFT 2006), organized by the Institute for Systems and Technologies of Information, Communication and Control (INSTICC) in cooperation with the Object Management Group (OMG), sponsored by

  19. Information Support for Environmental Management, Legacy Data Capture, and Data Assessment, Volume II

    Science.gov (United States)

    1994-12-01

    WSMR DATA U CIERM/TEC L- 1 PSL-94/74 ISEM Final Report, Volume II PSL-94174 L-2 WHITE SANDS HISSIL K ANGE Area 1 Area 2 Area 3 Area 4 Area 5 White Sands...Lake Lucero, NE * Foster Lake Area 4: WSMR. South * Bear Peak * Bennett Mountain * Lake Lucero, SE * Tres Hermanos , SW * Tres Hermanos , SE * Organ...Remarks 53 EDAC/UNM NM ESIC August 23, 1994 Tres Hermanos SE Agency Bureau of Land Management, Denver Agency NASA, Ames Latitude 323000N Latitude

  20. World Energy Data System (WENDS). Volume II. Country data, CZ-KS

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-06-01

    The World Energy Data System contains organized data on those countries and international organizations that may have critical impact on the world energy scene. Included in this volume, Vol. II, are Czechoslovakia, Denmark, Egypt, Finland, France, Germany (East), Germany (West), Greece, Guinea, India, Indonesia, Iran, Italy, Japan, and Korea (South). The following topics are covered for most of the countries: economic, demographic, and educational profiles; energy policy; indigenous energy resources and uses; forecasts, demand, exports, imports of energy supplies; environmental considerations of energy use; power production facilities; energy industries; commercial applications of energy; research and development activities of energy; and international activities.

  1. ASEAN--USAID Buildings Energy Conservation Project final report. Volume 2, Technology

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.

    1992-06-01

    This volume reports on research in the area of energy conservation technology applied to commercial buildings in the Association of Southeast Asian Nations (ASEAN) region. Unlike Volume I of this series, this volume is a compilation of original technical papers prepared by different authors in the project. In this regard, this volume is much like a technical journal. The papers that follow report on research conducted by both US and ASEAN researchers. The authors representing Indonesia, Malaysia, Philippines, and Thailand, come from a range of positions in the energy arena, including government energy agencies, electric utilities, and universities. As such, they account for a wide range of perspectives on energy problems and the role that technology can play in solving them. This volume is about using energy more intelligently. In some cases, the effort is towards the use of more advanced technologies, such as low-emittance coatings on window glass, thermal energy storage, or cogeneration. In others, the emphasis is towards reclaiming traditional techniques for rendering energy services, but in new contexts such as lighting office buildings with natural light, or cooling buildings of all types with natural ventilation. Used in its broadest sense, the term ``technology`` encompasses all of the topics addressed in this volume. Along with the more customary associations of technology, such as advanced materials and equipment and the analysis of their performance, this volume treats design concepts and techniques, analysis of ``secondary`` impacts from applying technologies (i.e., unintended impacts, or impacts on parties not directly involved in the purchase and use of the technology), and the collection of primary data used for conducting technical analyses.

  2. Assessment of the health and environmental effects of power generation in the Midwest. Volume II. Ecological effects

    Energy Technology Data Exchange (ETDEWEB)

    Dvorak, A J; Pentecost, E D

    1977-04-01

    This report presents an initial evaluation of the major health and environmental issues associated with increased coal use in the six Midwestern states of Illinois, Indiana, Michigan, Minnesota, Ohio, and Wisconsin. Using an integrated assessment approach, the evaluation proceeds from a base-line scenario of energy demand and facility siting for the period 1975 to 2020. Emphasis is placed on impacts from coal extraction, land reclamation, coal combustion for electrical generation, and coal gasification. The range of potential impacts and constraints is illustrated by a second scenario that represents an expected upper limit for coal utilization in Illinois. Volume I of the report includes a characterization of the energy demand and siting scenarios, coal related technologies, and coal resources, and the related impacts on air quality, water quality, and human health. Volume II includes background information on the native ecosystems, climate, soils, and agricultural land use and a description of the ecological impacts expected from coal utilization in southern Illinois, which as ecosystems representative of a large segment of the six-state area.

  3. Hybrid propulsion technology program. Volume 1: Conceptional design package

    Science.gov (United States)

    Jensen, Gordon E.; Holzman, Allen L.; Leisch, Steven O.; Keilbach, Joseph; Parsley, Randy; Humphrey, John

    1989-01-01

    A concept design study was performed to configure two sizes of hybrid boosters; one which duplicates the advanced shuttle rocket motor vacuum thrust time curve and a smaller, quarter thrust level booster. Two sizes of hybrid boosters were configured for either pump-fed or pressure-fed oxygen feed systems. Performance analyses show improved payload capability relative to a solid propellant booster. Size optimization and fuel safety considerations resulted in a 4.57 m (180 inch) diameter large booster with an inert hydrocarbon fuel. The preferred diameter for the quarter thrust level booster is 2.53 m (96 inches). As part of the design study critical technology issues were identified and a technology acquisition and demonstration plan was formulated.

  4. Conventional engine technology. Volume 3: Comparisons and future potential

    Science.gov (United States)

    Dowdy, M. W.

    1981-01-01

    The status of five conventional automobile engine technologies was assessed and the future potential for increasing fuel economy and reducing exhaust emission was discussed, using the 1980 EPA California emisions standards as a comparative basis. By 1986, the fuel economy of a uniform charge Otto engine with a three-way catalyst is expected to increase 10%, while vehicles with lean burn (fast burn) engines should show a 20% fuel economy increase. Although vehicles with stratified-charge engines and rotary engines are expected to improve, their fuel economy will remain inferior to the other engine types. When adequate NO emissions control methods are implemented to meet the EPA requirements, vehicles with prechamber diesel engines are expected to yield a fuel economy advantage of about 15%. While successful introduction of direct injection diesel engine technology will provide a fuel savings of 30 to 35%, the planned regulation of exhaust particulates could seriously hinder this technology, because it is expected that only the smallest diesel engine vehicles could meet the proposed particulate requirements.

  5. Function of cGMP-dependent protein kinase II in volume load-induced diuresis.

    Science.gov (United States)

    Schramm, Andrea; Schinner, Elisabeth; Huettner, Johannes P; Kees, Frieder; Tauber, Philipp; Hofmann, Franz; Schlossmann, Jens

    2014-10-01

    Atrial natriuretic peptide (ANP)/cGMPs cause diuresis and natriuresis. Their downstream effectors beyond cGMP remain unclear. To elucidate a probable function of cGMP-dependent protein kinase II (cGKII), we investigated renal parameters in different conditions (basal, salt diets, starving, water load) using a genetically modified mouse model (cGKII-KO), but did not detect any striking differences between WT and cGKII-KO. Thus, cGKII is proposed to play only a marginal role in the adjustment of renal concentration ability to varying salt loads without water restriction or starving conditions. When WT mice were subjected to a volume load (performed by application of a 10-mM glucose solution (3% of BW) via feeding needle), they exhibited a potent diuresis. In contrast, urine volume was decreased significantly in cGKII-KO. We showed that AQP2 plasma membrane (PM) abundance was reduced for about 50% in WT upon volume load, therefore, this might be a main cause for the enhanced diuresis. In contrast, cGKII-KO mice almost completely failed to decrease AQP2-PM distribution. This significant difference between both genotypes is not induced by an altered p-Ser256-AQP2 phosphorylation, as phosphorylation at this site decreases similarly in WT and KO. Furthermore, sodium excretion was lowered in cGKII-KO mice during volume load. In summary, cGKII is only involved to a minor extent in the regulation of basal renal concentration ability. By contrast, cGKII-KO mice are not able to handle an acute volume load. Our results suggest that membrane insertion of AQP2 is inhibited by cGMP/cGKII.

  6. Industrial Fuel Gas Demonstration Plant Program. Volume II. Commercial plant design (Deliverable Nos. 15 and 16)

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    This report presents a Conceptual Design and Evaluation of Commercial Plant report in four volumes as follows: I - Executive Summary, II - Commercial Plant Design, III - Economic Analyses, IV - Demonstration Plant Recommendations. Volume II presents the commercial plant design and various design bases and design analyses. The discussion of design bases includes definition of plant external and internal considerations. The basis is described for process configuration selection of both process units and support facilities. Overall plant characteristics presented include a summary of utilities/chemicals/catalysts, a plant block flow diagram, and a key plot plan. Each process unit and support facility is described. Several different types of process analyses are presented. A synopsis of environmental impact is presented. Engineering requirements, including design considerations and materials of construction, are summarized. Important features such as safety, startup, control, and maintenance are highlighted. The last section of the report includes plant implementation considerations that would have to be considered by potential owners including siting, coal and water supply, product and by-product characteristics and uses, overall schedule, procurement, construction, and spare parts and maintenance philosophy.

  7. Solid Waste Operations Complex W-113, Detail Design Report (Title II). Volume 3: Specifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Solid Waste Retrieval Facility--Phase 1 (Project W113) will provide the infrastructure and the facility required to retrieve from Trench 04, Burial ground 4C, contact handled (CH) drums and boxes at a rate that supports all retrieved TRU waste batching, treatment, storage, and disposal plans. This includes (1) operations related equipment and facilities, viz., a weather enclosure for the trench, retrieval equipment, weighing, venting, obtaining gas samples, overpacking, NDE, NDA, shipment of waste and (2) operations support related facilities, viz., a general office building, a retrieval staff change facility, and infrastructure upgrades such as supply and routing of water, sewer, electrical power, fire protection, roads, and telecommunication. Title I design for the operations related equipment and facilities was performed by Raytheon/BNFL, and that for the operations support related facilities including infrastructure upgrade was performed by KEH. These two scopes were combined into an integrated W113 Title II scope that was performed by Raytheon/BNFL. Volume 3 is a compilation of the construction specifications that will constitute the Title II materials and performance specifications. This volume contains CSI specifications for non-equipment related construction material type items, performance type items, and facility mechanical equipment items. Data sheets are provided, as necessary, which specify the equipment overall design parameters.

  8. Low-rank coal research: Volume 2, Advanced research and technology development: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Mann, M.D.; Swanson, M.L.; Benson, S.A.; Radonovich, L.; Steadman, E.N.; Sweeny, P.G.; McCollor, D.P.; Kleesattel, D.; Grow, D.; Falcone, S.K.

    1987-04-01

    Volume II contains articles on advanced combustion phenomena, combustion inorganic transformation; coal/char reactivity; liquefaction reactivity of low-rank coals, gasification ash and slag characterization, and fine particulate emissions. These articles have been entered individually into EDB and ERA. (LTN)

  9. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

  10. QuEST: Qualifying Environmentally Sustainable Technologies, Volume 5

    Science.gov (United States)

    Lewis, Pattie

    2010-01-01

    This edition of the QuEST newsletter contains brief articles that discuss the NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) program, and the importance of collaboration, efforts in materials management and substitution for coatings for launch structures, Low volatile organic compound (VOC) Coatings Field Testing, Non-Chrome Coating Systems, Life Cycle Corrosion Testing, Lead-Free Electronics Testing and Corn Based Depainting and efforts in Pollution Control in the area of Hypergolic Propellant Destruction Evaluation, efforts in development of alternative energy in particular Hydrogen Sensors, Energy and Water Management, and efforts in remediation in the removal of Polychlorinated Biphenyl (PCB) contamination

  11. QuEST: Qualifying Environmentally Sustainable Technologies. Volume 4

    Science.gov (United States)

    Lewis, Pattie L.

    2009-01-01

    In 2004, in one of their first collaborative efforts, Centro Para Prevencao da Poluicao (Portuguese Center for Pollution Prevention or C3P). teamed with Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM) and two Portuguese entities, TAP Portugal (Portuguese National Airline) and OGMA Indtistria Aeron utica de Portugal (Portuguese Aeronautics Industry), to target the reduction of hexavalent chromium, cadmium, and volatile organic compounds (VOCs) in aircraft maintenance operations. This project focused on two coating systems that utilize non-chrome pretreatments and low-VOC primers and topcoats.

  12. Cogeneration technology alternatives study. Volume 2: Industrial process characteristics

    Science.gov (United States)

    1980-01-01

    Information and data for 26 industrial processes are presented. The following information is given for each process: (1) a description of the process including the annual energy consumption and product production and plant capacity; (2) the energy requirements of the process for each unit of production and the detailed data concerning electrical energy requirements and also hot water, steam, and direct fired thermal requirements; (3) anticipated trends affecting energy requirements with new process or production technologies; and (4) representative plant data including capacity and projected requirements through the year 2000.

  13. Soft Computing in Information Communication Technology Volume 2

    CERN Document Server

    2012-01-01

    This book is a collection of the accepted papers concerning soft computing in information communication technology. The resultant dissemination of the latest research results, and the exchanges of views concerning the future research directions to be taken in this field makes the work of immense value to all those having an interest in the topics covered. The present book represents a cooperative effort to seek out the best strategies for effecting improvements in the quality and the reliability of Fuzzy Logic, Machine Learning, Cryptography, Pattern Recognition, Bioinformatics, Biomedical Engineering, Advancements in ICT.

  14. Current and future industrial energy service characterizations. Volume II. Energy data on the US manufacturing subsector

    Energy Technology Data Exchange (ETDEWEB)

    Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

    1980-10-01

    In order to characterize industrial energy service, current energy demand, its end uses, and cost of typical energy applications and resultant services in the industrial sector were examined and a projection of state industrial energy demands and prices to 1990 was developed. Volume II presents in Section 2 data on the US manufacturing subsector energy demand, intensity, growth rates, and cost for 1971, 1974, and 1976. These energy data are disaggregated not only by fuel type but also by user classifications, including the 2-digit SIC industry groups, 3-digit subgroups, and 4-digit SIC individual industries. These data characterize typical energy applications and the resultant services in this subsector. The quantities of fuel and electric energy purchased by the US manufacturing subsector were converted to British thermal units and reported in billions of Btu. The conversion factors are presented in Table 4-1 of Volume I. To facilitate the descriptive analysis, all energy cost and intensity data were expressed in constant 1976 dollars. The specific US industrial energy service characteristics developed and used in the descriptive analysis are presented in Volume I. Section 3 presents the computer program used to produce the tabulated data.

  15. Preliminary evaluation of alternative waste form solidification processes. Volume II. Evaluation of the processes

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    This Volume II presents engineering feasibility evaluations of the eleven processes for solidification of nuclear high-level liquid wastes (HHLW) described in Volume I of this report. Each evaluation was based in a systematic assessment of the process in respect to six principal evaluation criteria: complexity of process; state of development; safety; process requirements; development work required; and facility requirements. The principal criteria were further subdivided into a total of 22 subcriteria, each of which was assigned a weight. Each process was then assigned a figure of merit, on a scale of 1 to 10, for each of the subcriteria. A total rating was obtained for each process by summing the products of the subcriteria ratings and the subcriteria weights. The evaluations were based on the process descriptions presented in Volume I of this report, supplemented by information obtained from the literature, including publications by the originators of the various processes. Waste form properties were, in general, not evaluated. This document describes the approach which was taken, the developent and application of the rating criteria and subcriteria, and the evaluation results. A series of appendices set forth summary descriptions of the processes and the ratings, together with the complete numerical ratings assigned; two appendices present further technical details on the rating process.

  16. Investigation of HV/HR-CMOS technology for the ATLAS Phase-II Strip Tracker Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Fadeyev, V., E-mail: fadeyev@ucsc.edu [Santa Cruz Institute for Particle Physics, University of California, Santa Cruz, CA 95064 (United States); Galloway, Z.; Grabas, H.; Grillo, A.A.; Liang, Z.; Martinez-Mckinney, F.; Seiden, A.; Volk, J. [Santa Cruz Institute for Particle Physics, University of California, Santa Cruz, CA 95064 (United States); Affolder, A.; Buckland, M.; Meng, L. [Department of Physics, University of Liverpool, O. Lodge Laboratory, Oxford Street, Liverpool L69 7ZE (United Kingdom); Arndt, K.; Bortoletto, D.; Huffman, T.; John, J.; McMahon, S.; Nickerson, R.; Phillips, P.; Plackett, R.; Shipsey, I. [Department of Physics, Oxford University, Oxford (United Kingdom); and others

    2016-09-21

    ATLAS has formed strip CMOS project to study the use of CMOS MAPS devices as silicon strip sensors for the Phase-II Strip Tracker Upgrade. This choice of sensors promises several advantages over the conventional baseline design, such as better resolution, less material in the tracking volume, and faster construction speed. At the same time, many design features of the sensors are driven by the requirement of minimizing the impact on the rest of the detector. Hence the target devices feature long pixels which are grouped to form a virtual strip with binary-encoded z position. The key performance aspects are radiation hardness compatibility with HL-LHC environment, as well as extraction of the full hit position with full-reticle readout architecture. To date, several test chips have been submitted using two different CMOS technologies. The AMS 350 nm is a high voltage CMOS process (HV-CMOS), that features the sensor bias of up to 120 V. The TowerJazz 180 nm high resistivity CMOS process (HR-CMOS) uses a high resistivity epitaxial layer to provide the depletion region on top of the substrate. We have evaluated passive pixel performance, and charge collection projections. The results strongly support the radiation tolerance of these devices to radiation dose of the HL-LHC in the strip tracker region. We also describe design features for the next chip submission that are motivated by our technology evaluation.

  17. Investigation of HV/HR-CMOS technology for the ATLAS Phase-II Strip Tracker Upgrade

    Science.gov (United States)

    Fadeyev, V.; Galloway, Z.; Grabas, H.; Grillo, A. A.; Liang, Z.; Martinez-Mckinney, F.; Seiden, A.; Volk, J.; Affolder, A.; Buckland, M.; Meng, L.; Arndt, K.; Bortoletto, D.; Huffman, T.; John, J.; McMahon, S.; Nickerson, R.; Phillips, P.; Plackett, R.; Shipsey, I.; Vigani, L.; Bates, R.; Blue, A.; Buttar, C.; Kanisauskas, K.; Maneuski, D.; Benoit, M.; Di Bello, F.; Caragiulo, P.; Dragone, A.; Grenier, P.; Kenney, C.; Rubbo, F.; Segal, J.; Su, D.; Tamma, C.; Das, D.; Dopke, J.; Turchetta, R.; Wilson, F.; Worm, S.; Ehrler, F.; Peric, I.; Gregor, I. M.; Stanitzki, M.; Hoeferkamp, M.; Seidel, S.; Hommels, L. B. A.; Kramberger, G.; Mandić, I.; Mikuž, M.; Muenstermann, D.; Wang, R.; Zhang, J.; Warren, M.; Song, W.; Xiu, Q.; Zhu, H.

    2016-09-01

    ATLAS has formed strip CMOS project to study the use of CMOS MAPS devices as silicon strip sensors for the Phase-II Strip Tracker Upgrade. This choice of sensors promises several advantages over the conventional baseline design, such as better resolution, less material in the tracking volume, and faster construction speed. At the same time, many design features of the sensors are driven by the requirement of minimizing the impact on the rest of the detector. Hence the target devices feature long pixels which are grouped to form a virtual strip with binary-encoded z position. The key performance aspects are radiation hardness compatibility with HL-LHC environment, as well as extraction of the full hit position with full-reticle readout architecture. To date, several test chips have been submitted using two different CMOS technologies. The AMS 350 nm is a high voltage CMOS process (HV-CMOS), that features the sensor bias of up to 120 V. The TowerJazz 180 nm high resistivity CMOS process (HR-CMOS) uses a high resistivity epitaxial layer to provide the depletion region on top of the substrate. We have evaluated passive pixel performance, and charge collection projections. The results strongly support the radiation tolerance of these devices to radiation dose of the HL-LHC in the strip tracker region. We also describe design features for the next chip submission that are motivated by our technology evaluation.

  18. Technology Directions for the 21st Century. Volume 3

    Science.gov (United States)

    Crimi, Giles F.; Botta, Robert; Ditanna, Thomas; Verheggen, Henry; Stancati, Michael; Feingold, Harvey; Jacobs, Mark

    1996-01-01

    New technologies will unleash the huge capacity of fiber-optic cable to meet growing demands for bandwidth. Companies will continue to replace private networks with public network bandwidth-on-demand. Although asynchronous transfer mode (ATM) is the transmission technology favored by many, its penetration will be slower than anticipated. Hybrid networks - e.g., a mix of ATM, frame relay, and fast Ethernet - may predominate, both as interim and long-term solutions, based on factors such as availability, interoperability, and cost. Telecommunications equipment and services prices will decrease further due to increased supply and more competition. Explosive Internet growth will continue, requiring additional backbone transmission capacity and enhanced protocols, but it is not clear who will fund the upgrade. Within ten years, space-based constellations of satellites in Low Earth orbit (LEO) will serve mobile users employing small, low-power terminals. 'Little LEO's' will provide packet transmission services and geo-position determination. 'Big LEO's' will function as global cellular telephone networks, with some planning to offer video and interactive multimedia services. Geosynchronous satellites also are proposed for mobile voice grade links and high-bandwidth services. NASA may benefit from resulting cost reductions in components, space hardware, launch services, and telecommunications services.

  19. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

    Science.gov (United States)

    Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

    1980-01-01

    Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

  20. Survey of biomass gasification. Volume III. Current technology and research

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    This survey of biomass gasification was written to aid the Department of Energy and the Solar Energy Research Institute Biological and Chemical Conversion Branch in determining the areas of gasification that are ready for commercialization now and those areas in which further research and development will be most productive. Chapter 8 is a survey of gasifier types. Chapter 9 consists of a directory of current manufacturers of gasifiers and gasifier development programs. Chapter 10 is a sampling of current gasification R and D programs and their unique features. Chapter 11 compares air gasification for the conversion of existing gas/oil boiler systems to biomass feedstocks with the price of installing new biomass combustion equipment. Chapter 12 treats gas conditioning as a necessary adjunct to all but close-coupled gasifiers, in which the product is promptly burned. Chapter 13 evaluates, technically and economically, synthesis-gas processes for conversion to methanol, ammonia, gasoline, or methane. Chapter 14 compiles a number of comments that have been assembled from various members of the gasifier community as to possible roles of the government in accelerating the development of gasifier technology and commercialization. Chapter 15 includes recommendations for future gasification research and development.

  1. Evaluation of line focus solar central power systems. Volume II. Systems evaluation

    Energy Technology Data Exchange (ETDEWEB)

    1980-03-15

    An evaluation was completed to ascertain the applicability of line focus technologies to electrical power applications and to compare their performance and cost potential with point focus central receiver power systems. It was concluded that although the high temperature line focus (SRI) and fixed mirror line focus (GA) concepts duplicate the heat source characteristics and power conversion technology of the central receiver concepts these configurations do not offer a sufficient improvement in cost to warrant full scale development. The systems are, however, less complex than their point focus counterpart and should the central receiver system development falter they provide reasonable technology alternatives. The parabolic trough concept (BDM) was found to provide a low temperature technology alternative to the central receiver concept with promising performance and cost potential. Its continued development is recommended, with special emphasis on lower temperature (< 700/sup 0/F) applications. Finally, a variety of new promising line focus power system configurations were identified for a range of utility and industrial applications and recommendations were made on their implementation. This volume contains the detailed report. (WHK)

  2. Methods of Celestial Mechanics Volume II: Application to Planetary System, Geodynamics and Satellite Geodesy

    CERN Document Server

    Beutler, Gerhard

    2005-01-01

    G. Beutler's Methods of Celestial Mechanics is a coherent textbook for students as well as an excellent reference for practitioners. Volume II is devoted to the applications and to the presentation of the program system CelestialMechanics. Three major areas of applications are covered: (1) Orbital and rotational motion of extended celestial bodies. The properties of the Earth-Moon system are developed from the simplest case (rigid bodies) to more general cases, including the rotation of an elastic Earth, the rotation of an Earth partly covered by oceans and surrounded by an atmosphere, and the rotation of an Earth composed of a liquid core and a rigid shell (Poincaré model). (2) Artificial Earth Satellites. The oblateness perturbation acting on a satellite and the exploitation of its properties in practice is discussed using simulation methods (CelestialMechanics) and (simplified) first order perturbation methods. The perturbations due to the higher-order terms of the Earth's gravitational potential and reso...

  3. Proposed Tenaska Washington II Generation Project : Final Environmental Impact Statement. Volume 2: Public Involvement.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1994-01-01

    In regard to the proposed Tenaska Washington II Generation Project, the goal of the Bonneville Power Administration`s (BPA) Environmental Impact Statement (EIS) public involvement process is to determine the issues to be examined and pertinent analyses to be conducted and to solicit comments on the content and quality of information presented in the Draft Environmental Impact Statement (DEIS). Comments and questions are solicited from the public and government agencies during the scoping process and during the comment period and public hearing on the DEIS, to find out what is of most concern to them. The end product of the public involvement process is the Comment Report which follows in part of this volume on Public Involvement.

  4. Emerging Communication Technologies (ECT) Phase 2 Report. Volume 1; Main Report

    Science.gov (United States)

    Bastin, Gary L.; Harris, William G.; Chiodini, Robert; Nelson, Richard A.; Huang, PoTien; Kruhm, David A.

    2003-01-01

    The Emerging Communication Technology (ECT) project investigated three First Mile communication technologies in support of NASA s Second Generation Reusable Launch Vehicle (2nd Gen RLV), Orbital Space Plane, Advanced Range Technology Working Group (ARTWG) and the Advanced Spaceport Technology Working Group (ASTWG). These First Mile technologies have the purpose of interconnecting mobile users with existing Range Communication infrastructures. ECT was a continuation of the Range Information System Management (RISM) task started in 2002. RISM identified the three advance communication technologies investigated under ECT. These were Wireless Ethernet (Wi-Fi), Free Space Optics (FSO), and Ultra Wideband (UWB). Due to the report s size, it has been broken into three volumes: 1) Main Report 2) Appendices 3) UWB.

  5. THE MOUNTAIN IRON DIFFUSION PROGRAM: PHASE 1 SOUTH VANDENBERG: VOLUME II

    Energy Technology Data Exchange (ETDEWEB)

    Hinds, W. T.; Nickola, P. W.

    1968-01-01

    The purpose of the study was to determine an empirical diffusion equation for South Vandenberg. The scope of the operation included 1) tracer releases from two sites near two launch points and collection of diffusion and meteorological data over South Vandenberg; 2) reduction and analysis of diffusion and meteorological data for South Vandenberg. This Volume II contains a detailed discussion of techniques and data analysis. A description of the physical setting of South Vandenberg is contained in both volumes, to provide geographical nomenclature and relationships to the readers. Chapter 2 describes the experimental technique, meteorological support, and some of the problems involved in the program. A summary of the test conditions and data reduction methods is also included. In Chapter 3, a brief presentation of the theory of turbulent diffusion is given. Chapter 4 deals with data aquisition and reduction. Chapter 5 presents the diffusion data in summary form, and discusses the methods used for estimating plume growth. The integration of the data into theoretical relationships is discussed in Chapter 6. The results of brief investigations into other aspects of the Mountain Iron data, such as short-term releases and traj ectory determination, are discussed in Chapter 7. Finally, to lend confidence to use of the data and resulting equations, the Mountain Iron data are compared in several ways in Chapter 8 to earlier data from North Vandenberg and Hanford. Appendices contain a tabulation of the basic diffusion data, a listing of terminology and units, and aircraft sampling results.

  6. Planning manual for energy resource development on Indian lands. Volume II. Management and contractual arrangements

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-01

    This volume explores options for strengthening tribal control of energy-resource-development activities on their reservations. These options fall into two major categories: improvement of the tribe's internal administrative capability to plan, monitor, and regulate development activities; Part I of this volume addresses how this can be done. Another option deals with stronger and more-explicit contract terms in the development, agreement, and enforcement of those terms; Part II deals with this subject. In order to develop an effective control system, a tribe must be concerned with both of these areas. Contract stipulations will not be effective unless the tribe can ensure that they are enforced. Likewise, in monitoring and regulating company activities, a tribe is in a stronger position if it is backed up by contract terms governing operations on the reservation. The Tribes participating in this study have different levels of managerial capability and technical expertise in the energy field. Their interest in stronger controls on development varies. Therefore, a range of options is suggested.

  7. OTEC platform configuration and integration. Volume II. Technical concept. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-07-07

    The configuration, integration, and evaluation studies performed in the first phase of this contract resulted in a ranking of the most feasible platform candidates for commercial OTEC applications. On the basis of the results obtained from three individual contractors performing the same study, the Department of Energy made selections of two platform hulls for each contractor for conceptual designs. For Phase-II studies, M. Rosenblatt and Son, Inc. (MR and S) project team was given the SPAR and SPHERE platforms to perform not only conceptual designs for, but also cost and time schedules and sensitivity analyses. This is the second volume of a three-volume MR and S report, and it presents the results of conceptual designs for the two platforms, the facilities and equipment required for construction, deployment, and operation of these platforms, and cost estimates and time schedules. All conceptual design work is performed for the baseline site on West Coast of Florida. The cost differentials and other considerations involved with deploying the platforms in the New Orleans and Puerto Rico sites are also presented. As an end product of the complete study, the costs for the SPAR and the SPHERE platforms are reported both in terms of acquisition costs in 1978 dollars and life cycle costs in dollars per kilowatt.

  8. Research on surveying technology applied for DTM modelling and volume computation in open pit mines

    Directory of Open Access Journals (Sweden)

    Jaroslaw Wajs

    2016-01-01

    Full Text Available The spatial information systems of mining company can be used for monitoring of mining activity, excavation planning, calculations of the ore volume and decision making. Nowadays, data base has to be updated by sources such as surveying positioning technologies and remote sensed photogrammetry data. The presented paper contains review of the methodology for the digital terrain model, i.e. DTM, modelling and obtaining data from surveying technologies in an open pit mine or quarry. This paper reviews the application of GPS, total station measurements, and ground photogrammetry for the volume accuracy assessment of a selected object. The testing field was situated in Belchatow lignite open pit mine. A suitable object had been selected. The testing layer of coal seam was located at 8’th pit sidewall excavation area. The data were acquired two times within one month period and it was connected with monthly DTM actualization of excavation. This paper presents the technological process and the results of the research of using digital photogrammetry for opencast mining purposes in the scope of numerical volume computation and monitoring the mines by comparison of different sources. The results shows that the presented workflow allow to build DTM manually and remote sensed and the accuracy assessment was presented by the volume computation pathway. Major advantages of the techniques are presented illustrating how a terrestrial photogrammetry techniques provide rapid spatial measurements of breaklines 3D data utilized to volume calculation.

  9. Infinite dilution partial molar volumes of platinum(II) 2,4-pentanedionate in supercritical carbon dioxide.

    Science.gov (United States)

    Kong, Chang Yi; Siratori, Tomoya; Funazukuri, Toshitaka; Wang, Guosheng

    2014-10-03

    The effects of temperature and density on retention of platinum(II) 2,4-pentanedionate in supercritical fluid chromatography were investigated at temperatures of 308.15-343.15K and pressure range from 8 to 40MPa by the chromatographic impulse response method with curve fitting. The retention factors were utilized to derive the infinite dilution partial molar volumes of platinum(II) 2,4-pentanedionate in supercritical carbon dioxide. The determined partial molar volumes were small and positive at high pressures but exhibited very large and negative values in the highly compressible near critical region of carbon dioxide.

  10. Animal Science Technology. An Experimental Developmental Program. Volume I, Report of the Developmental Program.

    Science.gov (United States)

    Brant, Herman G.; And Others

    In 1961, administrative personnel at Delhi College in New York observed that formal training programs for animal science technicians were virtually nonexistant. Response to this apparent need resulted in the initiation of perhaps the first 2-year Animal Science Technology Program in the nation. This two-volume report is the result of an extensive…

  11. LIFAC sorbent injection desulfurization demonstration project. Final report, volume II: Project performance and economics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    This publication discusses the demonstration of the LIFAC sorbent injection technology at Richmond Power and Light`s Whitewater Valley Unit No. 2, performed under the auspices of the U.S. Department of Energy`s (DOE) Clean Coal Technology Program. LIFAC is a sorbent injection technology capable of removing 75 to 85 percent of a power plant`s SO{sub 2} emissions using limestone at calcium to sulfur molar ratios of between 2 and 2.5 to 1. The site of the demonstration is a coal-fired electric utility power plant located in Richmond, Indiana. The project is being conducted by LIFAC North America (LIFAC NA), a joint venture partnership of Tampella Power Corporation and ICF Kaiser Engineers, in cooperation with DOE, RP&L, and Research Institute (EPRI), the State of Indiana, and Black Beauty Coal Company. The purpose of Public Design Report Volume 2: Project Performance and Economics is to consolidate, for public use, the technical efficiency and economy of the LIFAC Process. The report has been prepared pursuant to the Cooperative Agreement No. DE-FC22-90PC90548 between LIFAC NA and the U.S. Department of Energy.

  12. Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part B, Remedial action, robotics/automation, waste management

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, R.L. [ed.

    1993-02-26

    The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration (ER) and waste management (WN) problems at the Oak Ridge K-25 Site. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remediation, decontamination, and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume 3 B provides the Technology Evaluation Data Sheets (TEDS) for ER/WM activities (Remedial Action Robotics and Automation, Waste Management) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than each technology in Vol. 2. The TEDS are arranged alphanumerically by the TEDS code number in the upper right corner of each data sheet. Volume 3 can be used in two ways: (1) technologies that are identified from Vol. 2 can be referenced directly in Vol. 3 by using the TEDS codes, and (2) technologies and general technology areas (alternatives) can be located in the index in the front of this volume.

  13. Information Technology, Type II Classroom Integration, and the Limited Infrastructure in Schools

    Science.gov (United States)

    Maddux, Cleborne D.; Johnson D. Lamont

    2006-01-01

    In this second special issue on Type II applications of information technology in education, the focus is on classroom integration. This editorial explores some possible explanations for the fact that information technology in schools has not fulfilled its considerable potential. One reason may be that individualized instruction is not part of the…

  14. Lwazi II Final Report: Increasing the impact of speech technologies in South Africa

    CSIR Research Space (South Africa)

    Calteaux, K

    2013-02-01

    Full Text Available From 2010-2012 the Human Language Technology (HLT) research group of the CSIR Meraka Institute received funding from the Department of Arts and Culture (DAC) for a project entitled Lwazi II: Increasing the impact of speech technologies in South...

  15. Distributed technologies in California's energy future: A preliminary report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, M.; Craig, P.; McGuire, C.B.; Simmons, M. (eds.)

    1977-09-01

    The chapters in Volume 2 of Distributed Energy Systems in California's Future are: Environmental Impacts of Alternative Energy Technologies for California; Land Use Configurations and the Utilization of Distributive Energy Technology; Land Use Implications of a Dispersed Energy Path; Belief, Behavior, and Technologies as Driving Forces in Transitional Stages--The People Problem in Dispersed Energy Futures; Development of an Energy Attitude Survey; Interventions to Influence Firms Toward the Adoption of ''Soft'' Energy Technology; The Entry of Small Firms into Distributed Technology Energy Industries; Short-Term Matching of Supply and Demand in Electrical Systems with Renewable Sources; Vulnerability of Renewable Energy Systems; and District Heating for California.

  16. Hot-gas cleanup system model development. Volume II. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Ushimaru, K.; Bennett, A.; Bekowies, P.J.

    1982-11-01

    Under Contract to the Department of Energy (DOE) through the Morgantown Energy Technology Center (METC), Flow Industries, Inc., has developed computer models to simulate the physical performance of five hot-gas cleanup devices for pressurized, fluidized-bed combustion (PFBC), combined-cycle power plants. Separate cost models have also been developed to estimate the cost of each device. The work leading to the development of these models is described in Volume I of this report. This volume contains the user's manuals for both the physical and cost models. The manuals for the physical models are given first followed by those for the cost models. Each manual is a complete and separate document. The model names and devices and their respective subroutine names are: (1) Moving Granular Bed Filter by Combustion Power Company, USRCGB, QFCOST; (2) Ceramic Bag Filter by Acurex, USRACB, QDCOST; (3) Electrostatic Granular Bed Filter by General Electric, USRGGB, QACOST; (4) Electrostatic Precipitator by Research Cottrell, USRCEP, QECOST; and (5) Electrocyclone by General Electric, USRGCY, QBCOST.

  17. Oil and gas technology transfer activities and potential in eight major producing states. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    In 1990, the Interstate Oil and Gas Compact Commission (the Compact) performed a study that identified the structure and deficiencies of the system by which oil and gas producers receive information about the potential of new technologies and communicate their problems and technology needs back to the research community. The conclusions of that work were that major integrated companies have significantly more and better sources of technology information than independent producers. The majors also have significantly better mechanisms for communicating problems to the research and development (R&D) community. As a consequence, the Compact recommended analyzing potential mechanisms to improve technology transfer channels for independents and to accelerate independents acceptance and use of existing and emerging technologies. Building on this work, the Compact, with a grant from the US Department Energy, has reviewed specific technology transfer organizations in each of eight major oil producing states to identify specific R&D and technology transfer organizations, characterize their existing activities, and identify potential future activities that could be performed to enhance technology transfer to oil and gas producers. The profiles were developed based on information received from organizations,follow-up interviews, site visit and conversations, and participation in their sponsored technology transfer activities. The results of this effort are reported in this volume. In addition, the Compact has also developed a framework for the development of evaluation methodologies to determine the effectiveness of technology transfer programs in performing their intended functions and in achieving desired impacts impacts in the producing community. The results of that work are provided in a separate volume.

  18. Using Task Data in Diagnostic Radiology. Research Report No. 8. Volume 2. Curriculum Objectives for Radiologic Technology.

    Science.gov (United States)

    Gilpatrick, Eleanor; Gullion, Christina

    This volume is the result of the application of the Health Services Mobility Study (HSMS) curriculum design method in radiologic technology and is presented in conjunction with volume 1, which reports the task analysis results. Volume 2 contains job-related behavioral curriculum objectives for the aide, technician, and technologist levels in…

  19. Slope excavation quality assessment and excavated volume calculation in hydraulic projects based on laser scanning technology

    Directory of Open Access Journals (Sweden)

    Chao Hu

    2015-04-01

    Full Text Available Slope excavation is one of the most crucial steps in the construction of a hydraulic project. Excavation project quality assessment and excavated volume calculation are critical in construction management. The positioning of excavation projects using traditional instruments is inefficient and may cause error. To improve the efficiency and precision of calculation and assessment, three-dimensional laser scanning technology was used for slope excavation quality assessment. An efficient data acquisition, processing, and management workflow was presented in this study. Based on the quality control indices, including the average gradient, slope toe elevation, and overbreak and underbreak, cross-sectional quality assessment and holistic quality assessment methods were proposed to assess the slope excavation quality with laser-scanned data. An algorithm was also presented to calculate the excavated volume with laser-scanned data. A field application and a laboratory experiment were carried out to verify the feasibility of these methods for excavation quality assessment and excavated volume calculation. The results show that the quality assessment indices can be obtained rapidly and accurately with design parameters and scanned data, and the results of holistic quality assessment are consistent with those of cross-sectional quality assessment. In addition, the time consumption in excavation project quality assessment with the laser scanning technology can be reduced by 70%−90%, as compared with the traditional method. The excavated volume calculated with the scanned data only slightly differs from measured data, demonstrating the applicability of the excavated volume calculation method presented in this study.

  20. ARPA-E Impacts: A Sampling of Project Outcomes, Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Rohlfing, Eric [Dept. of Energy (DOE), Washington DC (United States). Advanced Research Projects Agency-Energy (ARPA-E)

    2017-02-27

    The Advanced Research Projects Agency-Energy (ARPA-E) is demonstrating that a collaborative model has the power to deliver real value. The Agency’s first compilation booklet of impact sheets, published in 2016, began to tell the story of how ARPA-E has already made an impact in just seven years—funding a diverse and sophisticated research portfolio on advanced energy technologies that enable the United States to tackle our most pressing energy challenges. One year later our research investments continue to pay off, with a number of current and alumni project teams successfully commercializing their technologies and advancing the state of the art in transformative areas of energy science and engineering. There is no single measure that can fully illustrate ARPA-E’s success to date, but several statistics viewed collectively begin to reveal the Agency’s impact. Since 2009, ARPA-E has provided more than $1.5 billion in funding for 36 focused programs and three open funding solicitations, totaling over 580 projects. Of those, 263 are now alumni projects. Many teams have successfully leveraged ARPA-E’s investment: 56 have formed new companies, 68 have partnered with other government agencies to continue their technology development, and 74 teams have together raised more than $1.8 billion in reported funding from the private sector to bring their technologies to market. However, even when viewed together, those measures do not capture ARPA-E’s full impact. To best understand the Agency’s success, the specific scientific and engineering challenges that ARPA-E project teams have overcome must be understood. This booklet provides concrete examples of those successes, ranging from innovations that will bear fruit in the future to ones that are beginning to penetrate the market as products today. Importantly, half of the projects highlighted in this volume stem from OPEN solicitations, which the agency has run in 2009, 2012, and 2015. ARPA-E’s OPEN programs

  1. 5. annual clean coal technology conference: powering the next millennium. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increase demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal Technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains technical papers on: advanced coal process systems; advanced industrial systems; advanced cleanup systems; and advanced power generation systems. In addition, there are poster session abstracts. Selected papers from this proceedings have been processed for inclusion in the Energy Science and Technology database.

  2. A Novel Technology for Measurements of Dielectric Properties of Extremely Small Volumes of Liquids

    Directory of Open Access Journals (Sweden)

    Wei-Na Liu

    2016-01-01

    Full Text Available A high sensitivity sensor for measurement radio frequency (RF dielectric permittivity of liquids is described. Interference is used and parasitic effects are cancellation, which makes the sensor can catch weak signals caused by liquids with extremely small volumes. In addition, we present the relationship between transmission coefficient and permittivity of liquids under test (LUT. Using this sensor, quantitative measurements of the dielectric properties at 5.8 GHz are demonstrated of LUTs. Experiments show that the proposed method only requires the volume of 160 nanoliters for liquids. Therefore, the technology can be used for RF spectroscopic analysis of biological samples and extremely precious liquids.

  3. Gene targeting in embryonic stem cells, II: conditional technologies

    Science.gov (United States)

    Genome modification via transgenesis has allowed researchers to link genotype and phenotype as an alternative approach to the characterization of random mutations through evolution. The synergy of technologies from the fields of embryonic stem (ES) cells, gene knockouts, and protein-mediated recombi...

  4. Oak Ridge National Laboratory Technology Logic Diagram. Volume 1, Technology Evaluation: Part A, Decontamination and Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Strategic Roadmap for the Oak Ridge Reservation is a generalized planning document that identifies broad categories of issues that keep ORNL outside full compliance with the law and other legally binding agreements. Possible generic paths to compliance, issues, and the schedule for resolution of the issues one identified. The role of the Oak Ridge National Laboratory Technology Logic Diagram (TLD) is then to identify specific site issues (problems), identify specific technologies that can be brought to bear on the issues, and assess the current status and readiness of these remediation technologies within the constraints of the schedule commitment. Regulatory requirements and commitments contained in the Strategic Roadmap for the Oak Ridge Reservation are also included in the TLD as constraints to the application of immature technological solutions. Some otherwise attractive technological solutions may not be employed because they may not be deployable on the schedule enumerated in the regulatory agreements. The roadmap for ORNL includes a list of 46 comprehensive logic diagrams for WM of low-level, radioactive-mixed, hazardous, sanitary and industrial. and TRU waste. The roadmapping process gives comparisons of the installation as it exists to the way the installation should exist under full compliance. The identification of the issues is the goal of roadmapping. This allows accurate and timely formulation of activities.

  5. Y-12 Plant Remedial Action technology logic diagram. Volume I: Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Y-12 Plant Remedial Action Program addresses remediation of the contaminated groundwater, surface water and soil in the following areas located on the Oak Ridge Reservation: Chestnut Ridge, Bear Creek Valley, the Upper and Lower East Fork Popular Creek Watersheds, CAPCA 1, which includes several areas in which remediation has been completed, and CAPCA 2, which includes dense nonaqueous phase liquid wells and a storage facility. There are many facilities within these areas that are contaminated by uranium, mercury, organics, and other materials. This Technology Logic Diagram identifies possible remediation technologies that can be applied to the soil, water, and contaminants for characterization, treatment, and waste management technology options are supplemented by identification of possible robotics or automation technologies. These would facilitate the cleanup effort by improving safety, of remediation, improving the final remediation product, or decreasing the remediation cost. The Technology Logic Diagram was prepared by a diverse group of more than 35 scientists and engineers from across the Oak Ridge Reservation. Most are specialists in the areas of their contributions. 22 refs., 25 tabs.

  6. Citrus fruits. Part II. Chemistry, technology, and quality evaluation. B. Technology.

    Science.gov (United States)

    Ranganna, S; Govindarajan, V S; Ramana, K V

    1983-01-01

    In Part II of this review on citrus fruits, the literature on chemistry, technology, and quality evaluation are critically considered. Sweet oranges, mandarin, grapefruit, lemon, and lime are generally used for processing. The literature on chemical components of citrus fruit which include sugars, polysaccharides, organic acids, nitrogenous constituents and lipids; carotenoids which contribute to color; vitamins and minerals and flavonoids; limonoids, some of which impart bitterness to the juice; and the volatile components which contribute to aroma were reviewed in section A. Chilled and pasteurized juices, juice concentrates, and beverages are the important products manufactured commercially, and to a limited extent powdered citrus juices, canned segments, and marmalades. The literature on the manufacture of these products also as new types of juice and oil extractors; TASTE and other types of evaporators; tank farms to store juice and concentrate in bulk; aseptic filling in bulk containers and retail packs; alternate flexible and rigid containers other than glass and tin; and recovery of volatile flavoring constituents during juice processing are some of the important technological developments in the recent past and have been discussed in this section. Bitterness in citrus juices and its control, composition of cloud, and its stability and changes during storage have been reviewed. Essential oils, pectin, frozen and dried juice sacs, dried pulp and molasses, flavonoids, seed oil, and meal are the important byproducts, the manufacture of which is given in essential details. Generally, consumers judge the product on the basis of its sensory attributes. The quality of finished product is dependent upon the raw materials used and control of processes. In section C, the U.S. Department of Agriculture (USDA) standards for different products, physicochemical and microbiological parameters prescribed as indices of quality of fruit, juice, concentrate, and other

  7. Solid Waste Operations Complex W-113, Detail Design Report (Title II). Volume 4: Project cost estimate

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Solid Waste Retrieval Facility--Phase 1 (Project W113) will provide the infrastructure and the facility required to retrieve from Trench 04, Burial ground 4C, contact handled (CH) drums and boxes at a rate that supports all retrieved TRU waste batching, treatment, storage, and disposal plans. This includes (1) operations related equipment and facilities, viz., a weather enclosure for the trench, retrieval equipment, weighing, venting, obtaining gas samples, overpacking, NDE, NDA, shipment of waste and (2) operations support related facilities, viz., a general office building, a retrieval staff change facility, and infrastructure upgrades such as supply and routing of water, sewer, electrical power, fire protection, roads, and telecommunication. Title I design for the operations related equipment and facilities was performed by Raytheon/BNFL, and that for the operations support related facilities including infrastructure upgrade was performed by KEH. These two scopes were combined into an integrated W113 Title II scope that was performed by Raytheon/BNFL. This volume represents the total estimated costs for the W113 facility. Operating Contractor Management costs have been incorporated as received from WHC. The W113 Facility TEC is $19.7 million. This includes an overall project contingency of 14.4% and escalation of 17.4%. A January 2001 construction contract procurement start date is assumed.

  8. Energy Economic Data Base (EEDB) Program: Phase I, Volume II. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    This Volume II of Phase I of the Energy Economic Data Base Program contains appendices. Appendix A-1 provides the site and environmental data, derived from Appendix A of Guide for Economic Evaluation of Nuclear Reactor Plant Designs, USAEC Report NUS-531, modified to reflect current requirements. These data form the bases of the criteria used for designing the facility and for evaluating the routine and accidental release of radioactive liquids and gases to the environment. Appendix A-2 provides the site and environmental data as derived from Appendix A of NUS-531, and modified to reflect coal-plant siting, forming the bases of the criteria used for designing the facility and for evaluating the release of liquids and gases to the environment. A description of the topography of the hypothetical city, Middletown, is given. Appendix B provides an overall summary of the conclusions of NUS' work on all NUS tasks in support of the nuclear fuel-cycle work in Phase I. Appendix C-1 introduces the concepts involved and addresses methods of calculation of fixed charges applicable to investor-owned utilities, as used in the EEDB. Appendix C-2 consists of review and revision of each plant's fuel cycle and operating and maintenance costs in accordance with the EEDB update procedures. In Appendix D, NSSS Capital Costs for a Mature LMFBR Industry, much information is provided on plant description, cost estimate, comparison and discussion, drawings, and equipment list. (MCW)

  9. Energy Extension Service Pilot Program: evaluation report after two years. Volume II. State reports

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    This report, Vol. II, presents a discussion of the operations of the ten EES pilot state programs during the period from October 1, 1977 through September 30, 1979. Each of the ten pilot states - Alabama, Connecticut, Michigan, New Mexico, Pennsylvania, Tennessee, Texas, Washington, Wisconsin, and Wyoming - received a grant of approximately $1.1 million to develop and implement an 18-month program beginning on October 1, 1977. In September 1978, each State received an additional $370,000 for service-delivery programs for the extension of the pilot program, April 1979 through September 1979. A case-study description of the operations of the pilot program in each State is provided here, with special attention given to the two programs selected in each State for more-detailed study and survey research. Although the thrust of this volume is descriptive, some survey data and analyses are presented for the emphasis programs. Two telephone surveys of clients and a non-client sample were conducted, one at the end of the first year of the pilot program (October 1977 - September 1978) and one at the end of the second year (October 1978 - September 1979).

  10. Proceedings of the environmental technology through industry partnership conference. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, V.P.

    1995-10-01

    The overall objective of this conference was to review the latest environmental and waste management technologies being developed under the sponsorship of METC. The focus of this conference was also to address the accomplishments and barriers affecting private sector, and lay the groundwork for future technology development initiatives and opportunities. 26 presentations were presented in: Mixed waste characterization, treatment, and disposal; Contaminant plume containment and remediation; and Decontamination and decommissioning. In addition there were 10 Focus Area presentations, 31 Poster papers covering all Focus Areas, and two panel discussions on: Mixed waste characterization, treatment, and disposal issues; and the Application, evaluation, and acceptance of in-situ and ex-situ plume remediation technologies. Volume 2 contains 16 papers in a poster session and 8 papers in the contaminant plume containment and remediation and landfill stabilization Focus Areas. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  11. Electrosurgery: part II. Technology, applications, and safety of electrosurgical devices.

    Science.gov (United States)

    Taheri, Arash; Mansoori, Parisa; Sandoval, Laura F; Feldman, Steven R; Pearce, Daniel; Williford, Phillip M

    2014-04-01

    Electrosurgical currents can be delivered to tissue in monopolar or bipolar and monoterminal or biterminal modes, with the primary difference between these modes being their safety profiles. A monopolar electrosurgical circuit includes an active electrode and a dispersive (return) electrode, while there are 2 active electrodes in bipolar mode. In monoterminal mode, there is an active electrode, but there is no dispersive electrode connected to the patient's body and instead the earth acts as the return electrode. Biterminal mode uses a dispersive electrode connected to the patient's body, has a higher maximum power, and can be safer than monoterminal mode in certain situations. Electrosurgical units have different technologies for controlling the output power and for providing safety. A thorough understanding of these technologies helps with a better selection of the appropriate surgical generator and modes.

  12. Practice improvement, part II: update on patient communication technologies.

    Science.gov (United States)

    Roett, Michelle A; Coleman, Mary Thoesen

    2013-11-01

    Patient portals (ie, secure web-based services for patient health record access) and secure messaging to health care professionals are gaining popularity slowly. Advantages of web portals include timely communication and instruction, access to appointments and other services, and high patient satisfaction. Limitations include inappropriate use, security considerations, organizational costs, and exclusion of patients who are uncomfortable with or unable to use computers. Attention to the organization's strategic plan and office policies, patient and staff expectations, workflow and communication integration, training, marketing, and enrollment can facilitate optimal use of this technology. Other communication technologies that can enhance patient care include automated voice or text reminders and brief electronic communications. Social media provide another method of patient outreach, but privacy and access are concerns. Incorporating telehealthcare (health care provided via telephone or Internet), providing health coaching, and using interactive health communication applications can improve patient knowledge and clinical outcomes and provide social support.

  13. Spray drying technique: II. Current applications in pharmaceutical technology.

    Science.gov (United States)

    Sollohub, Krzysztof; Cal, Krzysztof

    2010-02-01

    This review presents current applications of spray drying in pharmaceutical technology. The topics discussed include the obtention of excipients and cospray dried composites, methods for increasing the aqueous solubility and bioavailability of active substances, and modified release profiles from spray-dried particles. This review also describes the use of the spray drying technique in the context of biological therapies, such as the spray drying of proteins, inhalable powders, and viable organisms, and the modification of the physical properties of dry plant extracts.

  14. Fluid Vessel Quantity Using Non-invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

    Science.gov (United States)

    Garofalo, Anthony A

    2013-01-01

    The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

  15. Fluid Vessel Quantity using Non-Invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

    Science.gov (United States)

    Garofalo, Anthony A.

    2013-01-01

    The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

  16. State Assessment and Testing Programs: An Annotated ERIC Bibliography. Volume I: General References. Volume II: Individual State Programs.

    Science.gov (United States)

    Porter, Deborah Elena; Wildemuth, Barbara

    There is a growing body of literature in the ERIC data base pertaining to state educational assessment and testing programs. Volume I of this bibliography includes abstracts of 39 documents and journal articles describing the design and implementation of programs, as well as the technical and political issues which have been addressed by the…

  17. Education as Experimentation: A Planned Variation Model. Volume IIIA: Findings: Cohort II; Interim Findings: Cohort III. Volume IIIB: Appendices.

    Science.gov (United States)

    Stebbins, Linda B.; And Others

    This segment of the national evaluation study of the Follow Through Planned Variation Model reviews the background of the study, describes 13 of the Follow Through models involved, and presents an analysis of the effects of these models on students. The analysis is based on data from 4 years of Follow Through participation by Cohort II children…

  18. US long distance fiber optic networks: Technology, evolution and advanced concepts. Volume 1: Executive summary

    Science.gov (United States)

    1986-01-01

    Over the past two decades, fiber optics has emerged as a highly practical and cost-efficient communications technology. Its competitiveness vis-a-vis other transmission media, especially satellite, has become a critical question. This report studies the likely evolution and application of fiber optic networks in the United States to the end of the century. The outlook for the technology of fiber systems is assessed and forecast, scenarios of the evolution of fiber optic network development are constructed, and costs to provide service are determined and examined parametrically as a function of network size and traffic carried. Volume 1 consists of the Executive Summary. Volume 2 focuses on fiber optic technology and long distance fiber optic networks. Volume 3 develops a traffic and financial model of a nationwide long distance transmission network. Among the study's most important conclusions are: revenue requirements per circuit for LATA-to-LATA fiber optic links are less than one cent per call minute; multiplex equipment, which is likely to be required in any competing system, is the largest contributor to circuit costs; the potential capacity of fiber optic cable is very large and as yet undefined; and fiber optic transmission combined with other network optimization schemes can lead to even lower costs than those identified in this study.

  19. Annual Science and Engineering Technology Conference/DOD Technology Exposition (7th). Volume 2. Wednesday - Thursday

    Science.gov (United States)

    2006-04-20

    to engine teams thru AF code AF added strong staff/tech support (AQR) Interview, Dr.P. Bevilaqua, NAE Skunk-PM, Invented Lift Fan FIRST: STO-SSDash-VL...wafer-scale Pilot Line for rapid technology development Producing 4” QVGA backplanes and TDs Tools, materials and processes developed to enable...Centers of Excellence • Co-Funded by AFOSR, TD and University • Extends the capabilities and scope of AFRL • Opens up opportunity for continued focus on AF

  20. Appalachian Rivers II Conference: Technology for Monitoring, Assessing, and Restoring Streams, Rivers, and Watersheds

    Energy Technology Data Exchange (ETDEWEB)

    None available

    1999-07-29

    On July 28-29, 1999, the Federal Energy Technology Center (FETC) and the WMAC Foundation co-sponsored the Appalachian Rivers II Conference in Morgantown, West Virginia. This meeting brought together over 100 manufacturers, researchers, academicians, government agency representatives, watershed stewards, and administrators to examine technologies related to watershed assessment, monitoring, and restoration. Sessions included presentations and panel discussions concerning watershed analysis and modeling, decision-making considerations, and emerging technologies. The final session examined remediation and mitigation technologies to expedite the preservation of watershed ecosystems.

  1. Anaerobic fermentation of agricultural residue: potential for improvement and implementation. Final report, Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Jewell, W. J.; Dell' orto, S.; Fanfoni, K. J.; Hayes, T. D.; Leuschner, A. P.; Sherman, D. F.

    1980-04-01

    Earlier studies have shown that although large quantities of agricultural residues are generated on small farms, it was difficult to economically justify use of conventional anaerobic digestion technology, such as used for sewage sludge digestion. A simple, unmixed, earthen-supported structure appeared to be capable of producing significant quantities of biogas at a cost that would make it competitive with many existing fuels. The goal of this study was to define and demonstrate a methane fermentation technology that could be practical and economically feasible on small farms. This study provides the first long term, large scale (reactor volumes of 34 m/sup 3/) parallel testing of the major theory, design, construction, and operation of a low cost approach to animal manure fermentation as compared to the more costly and complex designs. The main objectives were to define the lower limits for successful fermentor operation in terms of mixing, insulation, temperature, feed rate, and management requirements in a cold climate with both pilot scale and full scale fermentors. Over a period of four years, innovative fermentation processes for animal manures were developed from theoretical concept to successful full scale demonstration. Reactors were sized for 50 to 65 dairy animals, or for the one-family dairy size. The results show that a small farm biogas generation system that should be widely applicable and economically feasible was operated successfully for nearly two years. Although this low cost system out-performed the completely mixed unit throughout the study, perhaps the greatest advantage of this approach is its ease of modification, operation, and maintenance.

  2. Energy development in the Southwest: problems of water, fish, and wildlife in the Upper Colorado River Basin. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Spofford, W.O. Jr.; Parker, A.L.; Kneese, A.V. (eds.)

    1980-01-01

    The two-volume set is based primarily on an RFF forum held in Albuquerque, New Mexico, in October 1976. Most of the papers in the book were presented at this forum. All of them were revised and updated after the forum; some were partly or even wholly rewritten. Some of the papers depend directly on research results reported in others, and therefore major revisions were necessary to integrate these papers. Two new papers were added after the forum was held, as was the appendix, and five new discussions. This volume, Vol. II, contains the 10 other papers (chapters) of the set; a separate abstract was prepared for each.

  3. Enhancing economic competiveness of dish Stirling technology through production volume and localization: Case study for Morocco

    Science.gov (United States)

    Larchet, Kevin; Guédez, Rafael; Topel, Monika; Gustavsson, Lars; Machirant, Andrew; Hedlund, Maria-Lina; Laumert, Björn

    2017-06-01

    The present study quantifies the reduction in the levelized cost of electricity (LCoE) and capital expenditure (CAPEX) of a dish Stirling power plant (DSPP) through an increase in localization and unit production volume. Furthermore, the localization value of the plant is examined to determine how much investment is brought into the local economy. Ouarzazate, Morocco, was chosen as the location of the study due to the country's favorable regulatory framework with regards to solar power technologies and its established industry in the concentrating solar power (CSP) field. A detailed techno-economic model of a DSPP was developed using KTH's in-house modelling tool DYESOPT, which allows power plant evaluation by means of technical and economic performance indicators. Results on the basis of LCoE and CAPEX were compared between two different cases of production volume, examining both a minimum and maximum level of localization. Thereafter, the DSPP LCoE and localization value were compared against competing solar technologies to evaluate its competitiveness. In addition, a sensitivity analysis was conducted around key design parameters. The study confirms that the LCoE of a DSPP can be reduced to values similar to solar photovoltaic (PV) and lower than other CSP technologies. Furthermore, the investment in the local economy is far greater when compared to PV and of the same magnitude to other CSP technologies. The competiveness of a DSPP has the potential to increase further when coupled with thermal energy storage (TES), which is currently under development.

  4. The International Linear Collider Technical Design Report - Volume 3.II: Accelerator Baseline Design

    CERN Document Server

    Adolphsen, Chris; Barish, Barry; Buesser, Karsten; Burrows, Philip; Carwardine, John; Clark, Jeffrey; Durand, Helene Mainaud; Dugan, Gerry; Elsen, Eckhard; Enomoto, Atsushi; Foster, Brian; Fukuda, Shigeki; Gai, Wei; Gastal, Martin; Geng, Rongli; Ginsburg, Camille; Guiducci, Susanna; Harrison, Mike; Hayano, Hitoshi; Kershaw, Keith; Kubo, Kiyoshi; Kuchler, Victor; List, Benno; Liu, Wanming; Michizono, Shinichiro; Nantista, Christopher; Osborne, John; Palmer, Mark; Paterson, James McEwan; Peterson, Thomas; Phinney, Nan; Pierini, Paolo; Ross, Marc; Rubin, David; Seryi, Andrei; Sheppard, John; Solyak, Nikolay; Stapnes, Steinar; Tauchi, Toshiaki; Toge, Nobu; Walker, Nicholas; Yamamoto, Akira; Yokoya, Kaoru

    2013-01-01

    The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to incr...

  5. The International Linear Collider Technical Design Report - Volume 3.II: Accelerator Baseline Design

    Energy Technology Data Exchange (ETDEWEB)

    Adolphsen, Chris [SLAC National Accelerator Lab., Menlo Park, CA (United States); et al.

    2013-06-26

    The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.

  6. Smolt Monitoring Program, Part II, Volume II, Migrational Characteristics of Columbia Basin Salmon and Steelhead Trout, 1985 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Fish Passage Center

    1986-02-01

    Volume I of this report describes the results of travel time monitoring and other migrational characteristics of yearling and sub-yearling chinook salmon (Oncorhynchus tshawytscha), sockeye salmon (Oncorhynchus nerka), and steelhead trout (Salmo gairdneri). This volume presents the freeze brand data used in the analysis of travel time for Lower Granite, Rock Island, McNary, and John Day dams. Brand recoveries for Lower Monumental dam also are presented. Summary of data collection procedures and explanation of data listings are presented in conjunction with the mark recapture data.

  7. Endo Atmospheric-Exo Atmospheric Radar Modeling. Volume II. Part I. Computer Program Documentation.

    Science.gov (United States)

    1976-06-01

    dimension of the clutter volume in degrees AZO00 0 F Clutter volume starting azimuth angle. MM 0 1 Number of clutter volume azimuth increments. ELEXT 0 F...DELAZ - AZEXT/MM DELEL Elevation increment between clutter scatterers. DELEL = ELEXT /NN ICFLG This parameter is set to 1 if the clutter model has been

  8. Inside Out. Writings from the Prison Literacy Project. Volumes I-II.

    Science.gov (United States)

    Prison Literacy Project, Philadelphia, PA.

    These two volumes contain writings designed for the new reader who is in prison. Written by both inmates and external volunteers, the material in these volumes includes poems, stories, and short essays that deal with subjects of interest to prison inmates. To help the new reader, easier-to-read pieces are presented first. Titles in volume I are as…

  9. Coal liquefaction and gas conversion: Proceedings. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    Volume II contains papers presented at the following sessions: Indirect Liquefaction (oxygenated fuels); and Indirect Liquefaction (Fischer-Tropsch technology). Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  10. A reliable and consistent production technology for high volume compacted graphite iron castings

    Institute of Scientific and Technical Information of China (English)

    Liu Jincheng

    2014-01-01

    The demands for improved engine performance, fuel economy, durability, and lower emissions provide a continual chalenge for engine designers. The use of Compacted Graphite Iron (CGI) has been established for successful high volume series production in the passenger vehicle, commercial vehicle and industrial power sectors over the last decade. The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes, in China and globaly. The production window range for stable CGI is narrow and constantly moving. Therefore, any one step single addition of magnesium aloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings. The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity, without risking the formation of lfake graphite. The technology is currently being used in high volume Chinese foundry production. The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.

  11. Electric and Magnetic Fields (EMF) RAPID Program Engineering Project 8: FINAL REPORT, Evaluation of Field Reduction Technologies, Volume 1 (Report) and Volume 2 (Appendices)

    Energy Technology Data Exchange (ETDEWEB)

    Commonwealth Associates, Inc.; IIT Research Institute

    1997-08-01

    This draft report consists of two volumes. Volume 1, the main body, contains an introducto~ sectionj an overview of magnetic fields sectio~ and field reduction technology evaluation section. Magnetic field reduction methods are evalpated for transmission lines, distribution Iines,sulxtations, building wiring applkmd machinery, and transportation systems. The evaluation considers effectiveness, co% and other ftiors. Volume 2 contains five appendices, Append~ A presents magnetic field shielding information. Appendices B and C present design assumptions and magnetic field plots for transmission and distribution lines, respectively. Appendices D and E present cost estimate details for transmission and distribution limes, respectively.

  12. Integrated Spreadsheets as a Paradigm of Type II Technology Applications in Mathematics Teacher Education

    Science.gov (United States)

    Abramovich, Sergei

    2016-01-01

    The paper presents the use of spreadsheets integrated with digital tools capable of symbolic computations and graphic constructions in a master's level capstone course for secondary mathematics teachers. Such use of spreadsheets is congruent with the Type II technology applications framework aimed at the development of conceptual knowledge in the…

  13. Data summary of municipal solid waste management alternatives. Volume 3, Appendix A: Mass burn technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1992-10-01

    This appendix on Mass Burn Technologies is the first in a series designed to identify, describe and assess the suitability of several currently or potentially available generic technologies for the management of municipal solid waste (MSW). These appendices, which cover eight core thermoconversion, bioconversion and recycling technologies, reflect public domain information gathered from many sources. Representative sources include: professional journal articles, conference proceedings, selected municipality solid waste management plans and subscription technology data bases. The information presented is intended to serve as background information that will facilitate the preparation of the technoeconomic and life cycle mass, energy and environmental analyses that are being developed for each of the technologies. Mass burn has been and continues to be the predominant technology in Europe for the management of MSW. In the United States, the majority of the existing waste-to-energy projects utilize this technology and nearly 90 percent of all currently planned facilities have selected mass burn systems. Mass burning generally refers to the direct feeding and combustion of municipal solid waste in a furnace without any significant waste preprocessing. The only materials typically removed from the waste stream prior to combustion are large bulky objects and potentially hazardous or undesirable wastes. The technology has evolved over the last 100 or so years from simple incineration to the most highly developed and commercially proven process available for both reducing the volume of MSW and for recovering energy in the forms of steam and electricity. In general, mass burn plants are considered to operate reliably with high availability.

  14. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 3. Gas and drilling

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 3 contains papers from the sessions on natural gas supporting research, western gas sands project, drilling technology, and environmental effects. Individuals were processed for inclusion in the Energy Data Base.

  15. River Protection Project Integrated safety management system phase II verification report, volumes I and II - 8/19/99

    Energy Technology Data Exchange (ETDEWEB)

    SHOOP, D.S.

    1999-09-10

    The Department of Energy policy (DOE P 450.4) is that safety is integrated into all aspects of the management and operations of its facilities. In simple and straightforward terms, the Department will ''Do work safely.'' The purpose of this River Protection Project (RPP) Integrated Safety Management System (ISMS) Phase II Verification was to determine whether ISMS programs and processes are implemented within RFP to accomplish the goal of ''Do work safely.'' The goal of an implemented ISMS is to have a single integrated system that includes Environment, Safety, and Health (ES&H) requirements in the work planning and execution processes to ensure the protection of the worker, public, environment, and federal property over the RPP life cycle. The ISMS is comprised of the (1) described functions, components, processes, and interfaces (system map or blueprint) and (2) personnel who are executing those assigned roles and responsibilities to manage and control the ISMS. Therefore, this review evaluated both the ''paper'' and ''people'' aspects of the ISMS to ensure that the system is implemented within RPP. Richland Operations Office (RL) conducted an ISMS Phase I Verification of the TWRS from September 28-October 9, 1998. The resulting verification report recommended that TWRS-RL and the contractor proceed with Phase II of ISMS verification given that the concerns identified from the Phase I verification review are incorporated into the Phase II implementation plan.

  16. [National Institute for Petroleum and Energy Research] quarterly technical report, July 1--September 30, 1991. Volume 2, Energy production research

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The report is submitted in two volumes, Volume I representing the work accomplished under Fuels Research and Volume II the work for Energy Production Research during the period July 1--Sept. 30, 1991. Topics covered include: chemical flooding, gas displacement, thermal recovery, geoscience technology, resource assessment technology, microbial technology, environmental technology.

  17. Safety analysis report for the TRUPACT-II shipping package (condensed version). Volume 1, Rev. 14

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-01

    The condensed version of the TRUPACT-II Contact Handled Transuranic Waste Safety Analysis Report for Packaging (SARP) contains essential material required by TRUPACT-II users, plus additional contents (payload) information previously submitted to the U.S. Nuclear Regulatory Commission. All or part of the following sections, which are not required by users of the TRUPACT-II, are deleted from the condensed version: (i) structural analysis, (ii) thermal analysis, (iii) containment analysis, (iv) criticality analysis, (v) shielding analysis, and (vi) hypothetical accident test results.

  18. C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 1: Concepts of Use, Initial System Requirements, Architecture, and AeroMACS Design Considerations

    Science.gov (United States)

    Hall, Edward; Isaacs, James; Henriksen, Steve; Zelkin, Natalie

    2011-01-01

    This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I (this document) is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

  19. C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 2: Test Bed Performance Evaluation and Final AeroMACS Recommendations

    Science.gov (United States)

    Hall, Edward; Magner, James

    2011-01-01

    This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II (this document) describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

  20. Moving NSDC's Staff Development Standards into Practice: Innovation Configurations, Volume II. [CD-ROMs

    Science.gov (United States)

    National Staff Development Council, 2005

    2005-01-01

    The second volume of "Moving NSDC's Staff Development Standards into Practice: Innovation Configurations" builds on the work that began with the first volume published in 2003. An Innovation Configuration map is a device that identifies and describes the major components of a new practice such as the standards and details of how it would look in…

  1. How To Set Up Your Own Small Business. Volumes I-II and Overhead Transparencies.

    Science.gov (United States)

    Fallek, Max

    This two-volume textbook and collection of overhead transparency masters is intended for use in a course in setting up a small business. The following topics are covered in the first volume: getting off to a good start, doing market research, forecasting sales, financing a small business, understanding the different legal needs of different types…

  2. DICTIONARY OF OCCUPATIONAL TITLES, 1965. VOLUME II, OCCUPATIONAL CLASSIFICATION AND INDUSTRY INDEX.

    Science.gov (United States)

    Bureau of Employment Security (DOL), Washington, DC.

    VOLUME 2 COMPLEMENTS VOLUME 1 (VT 003 654) BY PROVIDING A CLASSIFICATION STRUCTURE WHICH GROUPS JOBS HAVING THE SAME BASIC OCCUPATIONAL, INDUSTRIAL, OR WORKER CHARACTERISTICS. THE SECTIONS ARE (1) THE OCCUPATIONAL CATEGORIES, DIVISIONS, AND GROUPS, (2) AN ALPHABETIC ARRANGEMENT OF OCCUPATIONAL DIVISIONS AND GROUPS, (3) THE OCCUPATIONAL GROUP…

  3. An Evaluation of the Nutrition Services for the Elderly. Volume II. Analytic Report.

    Science.gov (United States)

    Kirschner Associates, Inc., Albuquerque, NM.

    This document is part of a five-volume nationwide study of Nutrition Service operations and elderly citizens participating in congregate dining and home delivery services authorized by Title III-C of the Older Americans' Act. This volume contains the analytic report, which presents the major findings of the evaluation. Chapter 1 gives a report…

  4. Cost Analysis of Correctional Standards: Institutional-Based Programs and Parole. Volume II.

    Science.gov (United States)

    Singer, Neil M.; Wright, Virginia B.

    This second of two volumes provides cost guidelines and cost estimation techniques for use by jurisdictions in assessing costs of their own ongoing or contemplated correctional program activities. (Volume I is a companion summary published as a separate document for use by criminal justice policy-makers in need of a reference to the policy issues…

  5. Survey of Technology with Possible Applications to United States Coast Guard Buoy Tenders. Volume 1. Technology Assessment.

    Science.gov (United States)

    1987-09-01

    performance. Zig - zag tests show SWATH ships have half the overshoot of conventional ships. At slow speeds, the widely separated propulsion units aid...Ii S2 2-13 C, Lb 0 00 2-14 ’rkpl I% -W N~ louw W ME ’ K’.MM w~~b Af’- w~t W pw -.J 1 W ’W SS U. C ’U . 2-15 Mill ll WRII9PqWWmWIK"-wPFll7TW W.F K...Evaluation of a Compound Cycle Engine for Shipboard Gensets," Report No. DTNSRDC-PASD-CR-1886. 6.19 Mills , R.G., "Innovative Technology on Steam

  6. Final Safety Analysis Addenda to Hazards Summary Report, Experimental Breeder Reactor II (EBR-II): upgrading of plant protection system. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Allen, N. L.; Keeton, J. M.; Sackett, J. I. [comps.

    1980-06-01

    This report is the second in a series of compilations of the formal Final Safety Analysis Addenda (FSAA`s) to the EBR-II Hazard Summary Report and Addendum. Sections 2 and 3 are edited versions of the original FSAA`s prepared in support of certain modifications to the reactor-shutdown-system portion of the EBR-II plant-protection system. Section 4 is an edited version of the original FSAA prepared in support of certain modifications to a system classified as an engineered safety feature. These sections describe the pre- and postmodification system, the rationale for the modification, and required supporting safety analysis. Section 5 provides an updated description and analysis of the EBR-II emergency power system. Section 6 summarizes all significant modifications to the EBR-II plant-protection system to date.

  7. Global Air Mobility Advanced Technologies (GAMAT) Advanced Technology Development (ATD) Phase II Research and Development

    Science.gov (United States)

    2004-05-01

    chapter will begin with an overview of the focal topics we selected for design intervention generally, and then proceed to a discussion of how we...chapter will begin with an overview of the focal topics we selected for design intervention , then proceed to a discussion of the specific design concepts...GAMAT KA work and (b) judged relevant to our Phase II focus on flight planning. Some of these items are indicative of problems for which WCSS design

  8. Final Environmental Impact Statement for the Strategic Target System. Volume II

    Science.gov (United States)

    1992-05-01

    mm 110 Deranken, Marchelle 111 Guerra, Raquel mm 112 Kolder, Teri mim 113 Nakahara, Joyce m<-- 115 Gulliksen, Gary mm 116 Byrd, Jaime <mlm 117...1:| ii iis 13J 111 :W : ::::I| ill 497 Alvarez , Patrick mfm 499 Granda, Chia mim 501 Hilbonson, M. 1 iii 502 Damron, Mark H. 111 504 Stayton

  9. New municipal solid waste processing technology reduces volume and provides beneficial reuse applications for soil improvement and dust control

    Science.gov (United States)

    A garbage-processing technology has been developed that shreds, sterilizes, and separates inorganic and organic components of municipal solid waste. The technology not only greatly reduces waste volume, but the non-composted byproduct of this process, Fluff®, has the potential to be utilized as a s...

  10. Research safety vehicle program (Phase II) specification review. Volume II. Final technical report, Jul 1975--Nov 1976

    Energy Technology Data Exchange (ETDEWEB)

    Pugliese, S.M.

    1977-02-01

    In Phase I of the Research Safety Vehicle Program (RSV), preliminary design and performance specifications were developed for a mid-1980's vehicle that integrates crashworthiness and occupant safety features with material resource conservation, economy, and producibility. Phase II of the program focused on development of the total vehicle design via systems engineering and integration analyses. As part of this effort, it was necessary to continuously review the Phase I recommended performance specification in relation to ongoing design/test activities. This document contains the results of analyses of the Phase I specifications. The RSV is expected to satisfy all of the producibility and safety related specifications, i.e., handling and stability systems, crashworthiness, occupant protection, pedestrian/cyclist protection, etc.

  11. Fixed site neutralization model programmer's manual. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Engi, D.; Chapman, L.D.; Judnick, W.; Blum, R.; Broegler, L.; Lenz, J.; Weinthraub, A.; Ballard, D.

    1979-12-01

    This report relates to protection of nuclear materials at nuclear facilities. This volume presents the source listings for the Fixed Site Neutralization Model and its supporting modules, the Plex Preprocessor and the Data Preprocessor. (DLC)

  12. Conceptual design and systems analysis of photovoltaic systems. Volume II. Study results. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kirpich, A.

    1977-03-19

    This investigation of terrestrial PV systems considered the technical and economic feasibility for systems in three size categories: a small system of about 12 kW peak output for on-site residential use; a large 1500 MW central power plant contributing to the bulk energy of a utility system power grid; and an intermediate size system of about 250 kW for use on public or commercial buildings. In each category, conceptual designs were developed, performance was analyzed for a range of climatic regions, economic analyses were performed, and assessments were made of pertinent institutional issues. The report consists of three volumes. Volume I contains a Study Summary of the major study results. This volume contains the detailed results pertaining to on-site residential photovoltaic systems, central power plant photovoltaic systems, and intermediate size systems applied to commercial and public buildings. Volume III contains supporting appendix material. (WHK)

  13. Phase II trial of standard versus increased transfusion volume in Ugandan children with acute severe anemia

    National Research Council Canada - National Science Library

    Olupot-Olupot, Peter; Engoru, Charles; Thompson, Jennifer; Nteziyaremye, Julius; Chebet, Martin; Ssenyondo, Tonny; Dambisya, Cornelius M; Okuuny, Vicent; Wokulira, Ronald; Amorut, Denis; Ongodia, Paul; Mpoya, Ayub; Williams, Thomas N; Uyoga, Sophie; Macharia, Alex; Gibb, Diana M; Walker, A Sarah; Maitland, Kathryn

    2014-01-01

    .... The underlying etiology is often infectious, but specific pathogens are rarely identified. Guidelines developed to encourage rational blood use recommend a standard volume of whole blood (20 ml/kg...

  14. Method for Determining Language Objectives and Criteria. Volume II. Methodological Tools: Computer Analysis, Data Collection Instruments.

    Science.gov (United States)

    1979-05-25

    This volume presents (1) Methods for computer and hand analysis of numerical language performance data (includes examples) (2) samples of interview, observation, and survey instruments used in collecting language data. (Author)

  15. Proceedings of the 1984 workshop on high-energy excitations in condensed matter. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Silver, R.N. (comp.)

    1984-12-01

    This volume covers electronic excitations, momentum distributions, high energy photons, and a wrap-up session. Abstracts of individual items from the conference were prepared separately for the data base. (GHT)

  16. Automating the Exchange of Military Personnel Data Among Selected Army Organizations. Volume II. Appendices,

    Science.gov (United States)

    1981-06-30

    76.9 .D3 153 v.3- 4 . 6. Cardenas , Alfonso. "Evaluation and Selection of File Orangi- zation - A Model and System". Communications of the ACM. Volume 16...Decisions. Volume 8; Number 6; June 1976; 36-40. Georgia Tech Call Number: QA 76 .C5625 v.8. 20. Knottek, Nancy E. "Selecting A Distributed...Nahouraii, E.; Brooks, L.0; and Cardenas , A.F. "An Approach to Data Communication Between Different Generalized Data Base Management Systems

  17. The Defense Science Board 1999 Summer Study Task Force on 21st Century Defense Technology Strategies. Volume 1

    Science.gov (United States)

    2016-06-07

    Study Task Force On 21ST Century Defense Technology Strategies Volume 1 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR...3. Defense Technology Strategy and Management PART 4. Strategic Agility PART 5. Analysis and Quantitative Results iii PREFACE The Defense Science...Board (DSB) 1999 Summer Study Task Force on 21st Century Defense Technology Strategies continues a series of studies that have examined key challenges

  18. Heterogeneous Concurrent Modeling and Design in Java (Volume 1: Introduction to Ptolemy II)

    Science.gov (United States)

    2008-04-01

    which receives support from the National Science Foundation (NSF awards #0720882 ( CSR -EHS: PRET), #0647591 ( CSR -SGER), and #0720841 ( CSR -CPS)), the U...Foundation (NSF awards #0720882 ( CSR -EHS: PRET), #0647591 ( CSR -SGER), and #0720841 ( CSR -CPS)), the U. S. Army Research Office (ARO #W911NF-07-2...Ptolemy II configuration [26]. The ability to create such separately branded and packaged subsets of Ptolemy II is a major feature. The semantics of hybrid

  19. Comparison of SAGS I vs. SAGS II delivery systems in emerging implantation technologies

    Science.gov (United States)

    Despres, Joseph; Sweeney, Joseph

    2012-11-01

    The International Fire Code has classified Subatmospheric Gas Delivery Systems (SAGS) technologies into two main categories: SAGS Type I and SAGS Type II systems. SAGS Type I delivery systems both store and deliver gases at subatmospheric pressures. An example of this technology is ATMI's Safe Delivery Source (SDS®) adsorbent based cylinder. SAGS Type II delivery systems store fluids at high pressure and utilize mechanical devices internal to the cylinder to deliver the gas at subatmospheric pressures. Typical mechanical devices used to enable subatmospheric delivery are either set point regulators or mechanical capillary based systems. This paper focuses on how these delivery systems perform against the unique requirements of traditional beam line ion implantation as well as solar and flat panel applications. Specifically, data are provided showing the capability of these systems with respect to flow rate, residual gas left within the cylinder, and cylinder end-point flow and delivery pressure dynamics.

  20. Fukushima Daiichi Unit 1 Uncertainty Analysis-Exploration of Core Melt Progression Uncertain Parameters-Volume II.

    Energy Technology Data Exchange (ETDEWEB)

    Denman, Matthew R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brooks, Dusty Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    Sandia National Laboratories (SNL) has conducted an uncertainty analysi s (UA) on the Fukushima Daiichi unit (1F1) accident progression wit h the MELCOR code. Volume I of the 1F1 UA discusses the physical modeling details and time history results of the UA. Volume II of the 1F1 UA discusses the statistical viewpoint. The model used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). The goal of this work was to perform a focused evaluation of uncertainty in core damage progression behavior and its effect on key figures - of - merit (e.g., hydrogen production, fraction of intact fuel, vessel lower head failure) and in doing so assess the applicability of traditional sensitivity analysis techniques .

  1. GENII (Generation II): The Hanford Environmental Radiation Dosimetry Software System: Volume 3, Code maintenance manual: Hanford Environmental Dosimetry Upgrade Project

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

    1988-09-01

    The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). This coupled system of computer codes is intended for analysis of environmental contamination resulting from acute or chronic releases to, or initial contamination of, air, water, or soil, on through the calculation of radiation doses to individuals or populations. GENII is described in three volumes of documentation. This volume is a Code Maintenance Manual for the serious user, including code logic diagrams, global dictionary, worksheets to assist with hand calculations, and listings of the code and its associated data libraries. The first volume describes the theoretical considerations of the system. The second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. 7 figs., 5 tabs.

  2. ICPP calcined solids storage facility closure study. Volume II: Cost estimates, planning schedules, yearly cost flowcharts, and life-cycle cost estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    This document contains Volume II of the Closure Study for the Idaho Chemical Processing Plant Calcined Solids Storage Facility. This volume contains draft information on cost estimates, planning schedules, yearly cost flowcharts, and life-cycle costs for the four options described in Volume I: (1) Risk-Based Clean Closure; NRC Class C fill, (2) Risk-Based Clean Closure; Clean fill, (3) Closure to landfill Standards; NRC Class C fill, and (4) Closure to Landfill Standards; Clean fill.

  3. Survey of fish impingement at power plants in the United States. Volume II. Inland waters

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, III, Richard F.; Sharma, Rajendra K.

    1977-03-01

    Impingement of fish at cooling-water intakes of 33 power plants located on inland waters other than the Great Lakes has been surveyed and data are presented. Descriptions of site, plant, and intake design and operation are provided. Reports in this volume summarize impingement data for individual plants in tabular and histogram formats. Information was available from differing sources such as the utilities themselves, public documents, regulatory agencies, and others. Thus, the extent of detail in the reports varies greatly from plant to plant. Histogram preparation involved an extrapolation procedure that has inadequacies. The reader is cautioned in the use of information presented in this volume to determine intake-design acceptability or intensity of impacts on ecosystems. No conclusions are presented herein; data comparisons are made in Volume IV.

  4. DDC 10 Year Requirements and Planning Study. Volume II. Technical Discussion, Bibliography, and Glossary

    Science.gov (United States)

    1976-06-12

    Technology of Information Procesoing (1978-1988) ........ .................. ... 39 2.2.3 Organizational Interface Between DDC and Other Information...Requirements and Planning Study: Expert Penal Review Report. December 31, 1975. (AUER-2325/2326-T-N5 AD-A022 303) TABLE 14 Evaluation of Technological

  5. Secretarial Science. Curriculum Guides for Two-Year Postsecondary Programs. Volume II.

    Science.gov (United States)

    North Carolina State Dept. of Community Colleges, Raleigh.

    The second of three volumes in a postsecondary secretarial science curriculum, this manual contains course syllabi and abstracts of twenty-three courses included in the curriculum. Business and related courses abstracted include Introduction to Business, Business Mathematics, Business Law 1, Economics 1, and Survey of Data Processing Systems.…

  6. Savannah River Plant - Project 8980 engineering and design history. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    1957-01-01

    This volume provides an engineering and design history of the 100 area of the Savannah River Plant. This site consisted of five separate production reactor sites, 100-R, P, L, K, and C. The document summarizes work on design of the reactors, support facilities, buildings, siting, etc. for these areas.

  7. Cerebral Palsy and Related Disorders Prevention and Early Care: An Annotated Bibliography. Volume II, Part Two.

    Science.gov (United States)

    Rembolt, Raymond R., Comp.; Roth, Beth, Comp.

    Presented alphabetically by author's name in the second of the two volume annotated bibliography are 483 abstracts of scientific and public education literature on cerebral palsy published through 1971. The entries are said to focus on children under 2 years of age whose development has been delayed by the condition. The bibliography is explained…

  8. Ocean Thermal Energy Conversion (OTEC) platform configuration and integration. Volume II. Conceptual design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    The purpose of this project is to evaluate six candidate hullforms as candidates for the OTEC commercial plant. This volume is a summary of the conceptual design including facility requirements, cost, schedule, and site sensitivity. Two OTEC commercial plant configurations are considered in this study: the ship and the semi-submersible. Engineering drawings are presented. (WHR)

  9. AEROBIC AND ANAEROBIC TREATMENT OF C.I. DISPERSE BLUE 79 - VOLUME II, APPENDICES

    Science.gov (United States)

    This study was conducted to determine the fate of C.I. Disperse Blue 79, one of the largest production volume dyes, and select biodegradation products in a conventionally operated activated sludge process and an anaerobic sludge digestion system. To achieve this objective, a pilo...

  10. State In-Service Training for Correctional Personnel. Final Report. Volume II.

    Science.gov (United States)

    Kiefer, George W.

    This is part of the final report on a project that focused on the inservice training needs of correctional personnel in the Illinois penal system. Most of this volume is devoted to an overview of existing staff training for line personnel and parole agents; an assessment of unmet training needs; group discussion and other demonstration projects in…

  11. Operation of Wastewater Treatment Plants: A Field Study Training Program. Volume II. Second Edition.

    Science.gov (United States)

    California State Univ., Sacramento. Dept. of Civil Engineering.

    This manual was prepared by experienced wastewater collection system workers to provide a home study course to develop new qualified workers and expand the abilities of existing workers. This volume emphasizes material needed by intermediate-level operators and stresses the operation and maintenance of conventional treatment plants. This volume…

  12. Developing maintainability for tokamak fusion power systems. Phase I report. Volume II. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Zahn, H.S.

    1977-10-01

    This volume contains the following appendices: (1) baseline large module time estimates, (2) baseline intermediate module time estimates, (3) baseline small module time estimates, (4) alternate concept estimates, (5) maintenance equipment concepts, (6) additional reactor design definition, and (7) TOCOMO supplements. (MOW)

  13. Dancetime! 500 Years of Social Dance. Volume II: 20th Century. [Videotape].

    Science.gov (United States)

    Teten, Carol

    This 50-minute VHS videotape is the second in a 2-volume series that presents 500 years of social dance, music, and fashion. It features dance and music of the 20th century, including; 1910s: animal dances, castle walk, apache, and tango; 1920s: black bottom and charleston; 1930s: marathon, movie musicals, big apple, and jitterbug; 1940s: rumba;…

  14. Dancetime! 500 Years of Social Dance. Volume II: 20th Century. [Videotape].

    Science.gov (United States)

    Teten, Carol

    This 50-minute VHS videotape is the second in a 2-volume series that presents 500 years of social dance, music, and fashion. It features dance and music of the 20th century, including; 1910s: animal dances, castle walk, apache, and tango; 1920s: black bottom and charleston; 1930s: marathon, movie musicals, big apple, and jitterbug; 1940s: rumba;…

  15. Technical Reports (Part II). End of Project Report, 1968-1971, Volume IV.

    Science.gov (United States)

    Western Nevada Regional Education Center, Lovelock.

    The pamphlets included in this volume are technical reports prepared as outgrowths of the Student Information System of the Western Nevada Regional Education Center funded by a Title III grant under the Elementary and Secondary Education Act of 1965. These reports demonstrate the use of the stored data; methods of interpreting the printouts from…

  16. Systems Book for a Student Information System. End of Project Report, 1968-1971, Volume II.

    Science.gov (United States)

    Western Nevada Regional Education Center, Lovelock.

    The necessary handbooks for use of the Student Information System (SIS), developed and tested by the Western Nevada Regional Education Center under a 1968-71 Title III (Elementary and Secondary Education Act) grant, are presented in this volume. As noted, the purpose of the SIS is to supply data and information to persons or organizations who make…

  17. Engineering Drawing Practices - Volume I of II: Aerospace and Ground Support Equipment

    Science.gov (United States)

    Schwindt, Paul A.

    2015-01-01

    This manual establishes the essential requirements and reference documents for the preparation and revision of digital product definition data sets prepared for or by NASA at KSC. This volume is only applicable to KSC in-house programs/projects. These requirements do not apply to the preparation of illustrations, artwork, or figures in technical publications.

  18. Behavior Modification for Persons with Developmental Disabilities: Treatments and Supports. Volume II

    Science.gov (United States)

    Matson, Johnny L., Ed.; Laud, Rinita B., Ed.; Matson, Michael L., Ed.

    2004-01-01

    This book represents the second of two volumes that is designed to update readers on some of the more recent developments in the field of dual diagnosis, as applied to those with intellectual disabilities. While the last few decades have boasted newer and better advances in the field, particularly in terms of assessment devices and treatment…

  19. Keep Talking That Book! Booktalks To Promote Reading. Volume II. Professional Growth Series.

    Science.gov (United States)

    Littlejohn, Carol

    This volume, a companion to "Talk That Book: Booktalks To Promote Reading," presents 263 new booktalks on classics and best sellers that serve a wide range of interests for all ages and reading interests. Usually, booktalking is an oral presentation of 10 or 20 booktalks lasting about 30 minutes; however, this book can also act as a…

  20. SOLVENT-BASED TO WATERBASED ADHESIVE-COATED SUBSTRATE RETROFIT - VOLUME II: PROCESS OVERVIEW

    Science.gov (United States)

    This volume presents initial results of a study to identify the issues and barriers associated with retrofitting existing solvent-based equipment to accept waterbased adhesives as part of an EPA effort to improve equipment cleaning in the coated and laminated substrate manufactur...

  1. Distributed technologies in California's energy future. Volume I

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, M.; Craig, P.; McGuire, C.B.; Simmons, M. (eds.)

    1977-09-01

    This interim report contains eight of the eighteen chapters included in the complete report. In Chapter I, pertinent data, facts, and observations are made following an initial summary. Chapter II is an introduction, citing especially the writings of Amory Lovins. The criteria used in defining distributed systems, suggested by Lovins, are that the technologies be renewable, environmentally benign, local, subject to graceful failure, foolproof, flexible, comprehensible, and matched in energy quality. The following chapters are: The Energy Predicament; The California Setting; Energy Resources for California's Future; Alternative Energy Futures for California; Issues and Problems; and Directions for Future Work. Six appendices deal with residential heating loads and air conditioning, allocations, co-generation, population projections, and the California wind energy resource. (MCW)

  2. TIBER II/ETR final design report: Volume 1, 1. 0 Introduction; 2. 0 plasma engineering

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.D. (ed.)

    1987-09-01

    This paper discusses the design of the TIBER II tokamak test reactor. Specific topics discussed are the physics objectives for Tiber, magnetics, baseline operating point, pulsed inductive operation, edge physics and impurity control, fueling, disruption control, vertical stability and impurity flow reversal. (LSP)

  3. A Report on Longitudinal Evaluations of Preschool Programs. Volume II: Is Early Intervention Effective?

    Science.gov (United States)

    Bronfenbrenner, Urie

    This document is the second part in a report on longitudinal evaluations of preschool programs. Part I reviewed long-term, controlled studies in order to generally assess the impact of preschool intervention. Part II reviews follow-up data in order to resolve the following five questions: (1) Do children in experimental programs continue to gain…

  4. Heterogeneous Concurrent Modeling and Design in Java (Volume 2: Ptolemy II Software Architecture)

    Science.gov (United States)

    2008-04-01

    the State of California Micro Program, and the following companies: Agilent, Bosch, HSBC , Lockheed-Martin, National Instruments, and Toyota. PTOLEMY II...FA9550-06-0312), the Air Force Research Lab (AFRL), the State of California Micro Program, and the following companies: Agilent, Bosch, HSBC , Lockheed

  5. Heterogeneous Concurrent Modeling and Design in Java (Volume 3: Ptolemy II Domains)

    Science.gov (United States)

    2008-04-15

    State of California Micro Program, and the following companies: Agilent, Bosch, HSBC , Lockheed-Martin, National Instruments, and Toyota. PTOLEMY II...MURI #FA9550-06-0312), the Air Force Research Lab (AFRL), the State of California Micro Program, and the following companies: Agi- lent, Bosch, HSBC

  6. Proceedings of the third biennial conference and workshop on wind energy conversion systems. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Kornreich, T R [ed.

    1978-05-01

    Separate abstracts are included for 34 papers presented concerning technology development, meteorological siting considerations, multi-unit applications, and innovative and advanced systems concepts. Two papers were previously input into the energy data base.

  7. Multi-parallel open technology to enable collaborative volume visualization: how to create global immersive virtual anatomy classrooms.

    Science.gov (United States)

    Silverstein, Jonathan C; Walsh, Colin; Dech, Fred; Olson, Eric; E, Michael; Parsad, Nigel; Stevens, Rick

    2008-01-01

    Many prototype projects aspire to develop a sustainable model of immersive radiological volume visualization for virtual anatomic education. Some have focused on distributed or parallel architectures. However, very few, if any others, have combined multi-location, multi-directional, multi-stream sharing of video, audio, desktop applications, and parallel stereo volume rendering, to converge on an open, globally scalable, and inexpensive collaborative architecture and implementation method for anatomic teaching using radiological volumes. We have focused our efforts on bringing this all together for several years. We outline here the technology we're making available to the open source community and a system implementation suggestion for how to create global immersive virtual anatomy classrooms. With the releases of Access Grid 3.1 and our parallel stereo volume rendering code, inexpensive globally scalable technology is available to enable collaborative volume visualization upon an award-winning framework. Based upon these technologies, immersive virtual anatomy classrooms that share educational or clinical principles can be constructed with the setup described with moderate technological expertise and global scalability.

  8. Dentate gyrus-cornu ammonis (CA) 4 volume is decreased and associated with depressive episodes and lipid peroxidation in bipolar II disorder: Longitudinal and cross-sectional analyses.

    Science.gov (United States)

    Elvsåshagen, Torbjørn; Zuzarte, Pedro; Westlye, Lars T; Bøen, Erlend; Josefsen, Dag; Boye, Birgitte; Hol, Per K; Malt, Ulrik F; Young, L Trevor; Andreazza, Ana C

    2016-12-01

    Reduced dentate gyrus volume and increased oxidative stress have emerged as potential pathophysiological mechanisms in bipolar disorder. However, the relationship between dentate gyrus volume and peripheral oxidative stress markers remains unknown. Here, we examined dentate gyrus-cornu ammonis (CA) 4 volume longitudinally in patients with bipolar II disorder (BD-II) and healthy controls and investigated whether BD-II is associated with elevated peripheral levels of oxidative stress. We acquired high-resolution structural 3T-magnetic resonance imaging (MRI) images and quantified hippocampal subfield volumes using an automated segmentation algorithm in individuals with BD-II (n=29) and controls (n=33). The participants were scanned twice, at study inclusion and on average 2.4 years later. In addition, we measured peripheral levels of two lipid peroxidation markers (4-hydroxy-2-nonenal [4-HNE] and lipid hydroperoxides [LPH]). First, we demonstrated that the automated hippocampal subfield segmentation technique employed in this work reliably measured dentate gyrus-CA4 volume. Second, we found a decreased left dentate gyrus-CA4 volume in patients and that a larger number of depressive episodes between T1 and T2 predicted greater volume decline. Finally, we showed that 4-HNE was elevated in BD-II and that 4-HNE was negatively associated with left and right dentate gyrus-CA4 volumes in patients. These results are consistent with a role for the dentate gyrus in the pathophysiology of bipolar disorder and suggest that depressive episodes and elevated oxidative stress might contribute to hippocampal volume decreases. In addition, these findings provide further support for the hypothesis that peripheral lipid peroxidation markers may reflect brain alterations in bipolar disorders. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Design of Studies for Development of BPA Fish and Wildlife Mitigation Accounting Policy Phase II, Volume II, 1985-1988 Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Kneese, Allen V.

    1988-08-01

    The incremental costs of corrective measures to lessen the environmental impacts of the hydroelectric system are expected to increase and difficult questions to arise about the costs, effectiveness, and justification of alternative measures and their systemwide implications. The BPA anticipate this situation by launching a forward-looking research program aimed at providing methodological tools and data suitable for estimating the productivity and cost implications of mitigation alternatives in a timely manner with state-of-the-art accuracy. Resources for the Future (RFF) agreed at the request of the BPA to develop a research program which would provide an analytical system designed to assist the BPA Administrator and other interested and responsible parties in evaluating the ecological and economic aspects of alternative protection, enhancement, and mitigation measures. While this progression from an ecological understanding to cost-effectiveness analyses is straightforward in concept, the complexities of the Columbia River system make the development of analytical methods far from simple in practice. The Phase 2 final report outlines the technical issues involved in developing an analytical system and proposes a program of research to address these issues. The report is presented in the Summary Report (Volume 1), and the present volume which consists of three technical reports: Part I, Modeling the Salmon and Steelhead Fisheries of the Columbia River Basin; Part II, Models for Cost-Effectiveness Analysis; and Part III, Ocean Fisheries Harvest Management.

  10. An State-of-Art Report on Remote Fabrication Technology Development for EBR-II Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Song, K. C.; Lee, J. W.; Kim, S. S.; Park, J. J.; Cho, K. H.; Lee, D. Y.; Ryu, H. J.; Lee, C. B

    2008-05-15

    The Generation-IV nuclear system program, aiming to continue the sustainable development of nuclear power utilization, was internationally started from 2000. In order to develop the sodium cooled fast reactor (SFR) that is expected to be commercialized firstly among Gen-IV candidate nuclear systems, it would be essential that construction of hot-cell facility for SFR fuel fabrication will be important. SFR fuel contains minor actinide elements recycled from spent fuel and R and D program on a fabrication technology development of TRU metal fuel is currently conducted. Therefore, SFR fuel fabrication technology in hot cell will be future urgent issue. This report is an state-of art report related to remote fabrication technologies of metal fuel for the development of EBR-II fuel cycle at ANL. The focus in this report is the summary on the development of EBR-II fuel fabrication processes and its equipment, operation experience in each process which covers melt refining process of spent metal fuel, fuel pin and element fabrication processes and subassembly fabrication process, waste management. Argonne National Laboratory (ANL) (retitled to INL) designed and constructed the EBR(Experimental fast neutron Breeder Reactor)-II and were into operation using enriched uranium alloy fuel in July 1964. Over 700 irradiated reactor subassemblies were processed in the FCF (Fuel Cycle Facility) and returned to EBR-II reactor through April 1969. The comprehensive remote fabrication technology in hot cell for metallic fuel has been established according to EBR-II fuel cycle program. In FCF, the spent uranium alloy fuel from reactor was promptly recovered for reuse on site by low-decontamination, pyrometallurgical partial purification process called melt refining process. About 2.4 metric tons of irradiated fuel were processed by melt refining process. From the recovered fuel and additional new alloy, about 34,500 fully acceptable fuel elements were fabricated remotely in hot cell

  11. Short transmembrane domains with high-volume exoplasmic halves determine retention of Type II membrane proteins in the Golgi complex.

    Science.gov (United States)

    Quiroga, Rodrigo; Trenchi, Alejandra; González Montoro, Ayelén; Valdez Taubas, Javier; Maccioni, Hugo J F

    2013-12-01

    It is still unclear why some proteins that travel along the secretory pathway are retained in the Golgi complex whereas others make their way to the plasma membrane. Recent bioinformatic analyses on a large number of single-spanning membrane proteins support the hypothesis that specific features of the transmembrane domain (TMD) are relevant to the sorting of these proteins to particular organelles. Here we experimentally test this hypothesis for Golgi and plasma membrane proteins. Using the Golgi SNARE protein Sft1 and the plasma membrane SNARE protein Sso1 from Saccharomyces cerevisiae as model proteins, we modified the length of their TMDs and the volume of their exoplasmic hemi-TMD, and determined their subcellular localization both in yeast and mammalian cells. We found that short TMDs with high-volume exoplasmic hemi-TMDs confer Golgi membrane residence, whereas TMDs with low-volume exoplasmic hemi-TMDs, either short or long, confer plasma membrane residence to these proteins. Results indicate that the shape of the exoplasmic hemi-TMD, in addition to the length of the entire TMD, determine retention in the Golgi or exit to the plasma membrane of Type II membrane proteins.

  12. Demonstration, testing, & evaluation of in situ heating of soil. Draft final report, Volume II: Appendices A to E

    Energy Technology Data Exchange (ETDEWEB)

    Dev, H.; Enk, J.; Jones, D.; Saboto, W.

    1996-02-12

    This document is a draft final report for US DOE contract entitled, {open_quotes}Demonstration Testing and Evaluation of In Situ Soil Heating,{close_quotes} Contract No. DE-AC05-93OR22160, IITRI Project No. C06787. This report is presented in two volumes. Volume I contains the technical report This document is Volume II, containing appendices with background information and data. In this project approximately 300 cu. yd. of clayey soil containing a low concentration plume of volatile organic chemicals was heated in situ by the application of electrical energy. It was shown that as a result of heating the effective permeability of soil to air flow was increased such that in situ soil vapor extraction could be performed. The initial permeability of soil was so low that the soil gas flow rate was immeasurably small even at high vacuum levels. When scaled up, this process can be used for the environmental clean up and restoration of DOE sites contaminated with VOCs and other organic chemicals boiling up to 120{degrees}to 130{degrees}C in the vadose zone. Although it may applied to many types of soil formations, it is particularly attractive for low permeability clayey soil where conventional in situ venting techniques are limited by low air flow.

  13. COOMET.RI(II)-S1.Rn-222 (169/UA/98): Rn-222 volume activity comparison

    Energy Technology Data Exchange (ETDEWEB)

    Skliarov, V. [National Scientific Centre, Institute of Metrology (NSC IM), Kharkiv (Ukraine); Rottger, A.; Honig, A. [Physikalisch-Technische Bundesanstalt (PTB), Braunschweig (Germany); Korostin, S.; Kuznetsov, S. [All-Russian Scientific Research Institute of Physical, Technical and Radio Measurements (VNIIFTRI), Moscow Region, Mendeleyevo (Russian Federation); Lapenas, A. [Latvian National Metrology Centre Ltd, Radiation Metrology and Testing Centre (RMTC), Salaspils (Latvia); Milevsky, V.; Ivaniukovich, A. [Belarussian State Institute of Metrology (BelGIM), Minsk (Belarus); Kharitonov, I.; Sepman, S. [D I Mendeleyev Institute of metrology (VNIIM), Saint Petersburg (Russian Federation)

    2009-06-15

    According to a first program, a supplementary comparison of Rn-222 volume activity was drawn up as a bilateral supplementary comparison between NSC 'Institute of Metrology', Ukraine, and VNIIFTRI, Russia. It took place in March 2005. In April 2005, at the 5. meeting of COOMET held in Braunschweig (Germany), representatives of these institutes exchanged data which showed the comparability of the national standards of Ukraine and Russia for the check points. During the discussion of the procedure some other institutes decided to join the comparison program, which was extended to BelGIM (Belarus), PTB (Germany), VNIIM (Russia) and RMTC (Latvia). The national standards of volume activity of radon-222 were thus calibrated using one standard radon radiometer as the transfer standard. Results are shown in the Final Report of the comparison. (authors)

  14. Preliminary design of the Carrisa Plains solar central receiver power plant. Volume II. Plant specifications

    Energy Technology Data Exchange (ETDEWEB)

    Price, R. E.

    1983-12-31

    The specifications and design criteria for all plant systems and subsystems used in developing the preliminary design of Carrisa Plains 30-MWe Solar Plant are contained in this volume. The specifications have been organized according to plant systems and levels. The levels are arranged in tiers. Starting at the top tier and proceeding down, the specification levels are the plant, system, subsystem, components, and fabrication. A tab number, listed in the index, has been assigned each document to facilitate document location.

  15. CONSUMPTION VOLUMES TECHNOLOGY OF ELECTRICITY AND HEAT BY DEPARTMENTS OF THE UNIVERSITY

    Directory of Open Access Journals (Sweden)

    O. M. Pshinko

    2015-01-01

    Full Text Available Purpose. Efficient use of natural energy resources is one of the priorities of the state policy in the sphere of universities and institutions of the Ministry of Education and Science of Ukraine. Besides search and development the new efficient and clean energy systems it is necessary to implement optimal management of the development and operation of existing facilities, reducing their energy costs. Purpose of this work is to develop consumption volume technology of electricity and heat by scientific departments of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan (DNURT for further finding the ways to reduce energy consumption. The problem is due to the specifics of University’s energy scheme. There is a difficulty for the installation of energy meters and data acquisition about their use in individual branches and structural units. At the same time it is impossible to assess qualitatively the energy position of scientific departments. Methodology. The method to determine the electricity and heat consumption for space heating of scientific departments at the university is based on «The intersectoral rules of electricity and heat energy for institutions and public sector organizations in Ukraine» and «Codes and regulations on rationing of fuel and heat energy for heating the residential buildings as well as for economic needs in Ukraine». Findings. Developed determining expenditure technology of electricity and heat for heating by scientific departments at the DNURT named after Academician V. Lazaryan allows obtaining data on energy consumption in individual units without direct measure and analyzing the effectiveness of energy saving technologies. Originality. It is represented by energy costs in the form of two components and these components are defined on the basis of the energy audit. This enables the energy inputs to implement energy efficiency measures in the research departments of the

  16. Force Management Methods Task II. Volume I. Summary and Analysis Considerations

    Science.gov (United States)

    1980-11-01

    iiDi’stLII.J TABLE OF CONTENTS SECTION PAGE INTRODUCTION 1 2 FORCE MANAGEMENT OVERVIEW 2 K 2.1 FORCE MANAGEMENT DEFINITION 4 2.2 FORCE MANAGEMENT ELEMENTS...34A w toIW W" r z a . 0a to, to co f. go-I I % at,, o" -, .... w a 1.45.4 -- - to~1.. S. h - .ar.. ]h. 2.1 FORCE MANAGEMENT DEFINITION The MIL-STD-1530A

  17. High power CO II lasers and their material processing applications at Centre for Advanced Technology, India

    Science.gov (United States)

    Nath, A. K.; Paul, C. P.; Rao, B. T.; Kau, R.; Raghu, T.; Mazumdar, J. Dutta; Dayal, R. K.; Mudali, U. Kamachi; Sastikumar, D.; Gandhi, B. K.

    2006-01-01

    We have developed high power transverse flow (TF) CW CO II lasers up to 15kW, a high repetition rate TEA CO II laser of 500Hz, 500W average power and a RF excited fast axial flow CO II laser at the Centre for Advanced Technology and have carried out various material processing applications with these lasers. We observed very little variation of discharge voltage with electrode gap in TF CO II lasers. With optimally modulated laser beam we obtained better results in laser piercing and cutting of titanium and resolidification of 3 16L stainless steel weld-metal for improving intergranular corrosion resistance. We carried out microstructure and phase analysis of laser bent 304 stainless steel sheet and optimum process zones were obtained. We carried out laser cladding of 316L stainless steel and Al-alloy substrates with Mo, WC, and Cr IIC 3 powder to improve their wear characteristics. We developed a laser rapid manufacturing facility and fabricated components of various geometries with minimum surface roughness of 5-7 microns Ra and surface waviness of 45 microns between overlapped layers using Colmonoy-6, 3 16L stainless steel and Inconel powders. Cutting of thick concrete blocks by repeated laser glazing followed by mechanical scrubbing process and drilling holes on a vertical concrete with laser beam incident at an optimum angle allowing molten material to flow out under gravity were also done. Some of these studies are briefly presented here.

  18. Low-level radioactive waste from commercial nuclear reactors. Volume 2. Treatment, storage, disposal, and transportation technologies and constraints

    Energy Technology Data Exchange (ETDEWEB)

    Jolley, R.L.; Dole, L.R.; Godbee, H.W.; Kibbey, A.H.; Oyen, L.C.; Robinson, S.M.; Rodgers, B.R.; Tucker, R.F. Jr.

    1986-05-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 2 discusses the definition, forms, and sources of LLRW; regulatory constraints affecting treatment, storage, transportation, and disposal; current technologies used for treatment, packaging, storage, transportation, and disposal; and the development of a matrix relating treatment technology to the LLRW stream as an aid for choosing methods for treating the waste. Detailed discussions are presented for most LLRW treatment methods, such as aqueous processes (e.g., filtration, ion exchange); dewatering (e.g., evaporation, centrifugation); sorting/segregation; mechanical treatment (e.g., shredding, baling, compaction); thermal processes (e.g., incineration, vitrification); solidification (e.g., cement, asphalt); and biological treatment.

  19. Technology transfer for the US Department of Energy's Energy Storage Program: Volume 2, Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Bruneau, C.L.; Fassbender, L.L.

    1988-10-01

    This document contains the appendices to Technology Transfer Recommendations for the US Department of Energy's Storage Program (PNL-6484, Vol. 1). These appendices are a list of projects, publications, and presentations connected with the Energy Storage (STOR) program. In Volume 1, the technology transfer activities of the STOR program are examined and mechanisms for increasing the effectiveness of those activities are recommended.

  20. Kilowatt isotope power system. Phase II plan. Volume V. Safety, quality assurance and reliability

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-15

    The development of a Kilowatt Isotope Power System (KIPS) was begun in 1975 for the purpose of satisfying the power requirements of satellites in the 1980's. The KIPS is a /sup 238/PuO/sub 2/-fueled organic Rankine cycle turbine power system to provide a design output of 500 to 2000 W. Included in this volume are: launch and flight safety considerations; quality assurance techniques and procedures to be followed through system fabrication, assembly and inspection; and the reliability program made up of reliability prediction analysis, failure mode analysis and criticality analysis. (LCL)

  1. Physics of reactor safety. Volume II. Quarterly report, April-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The work in the Applied Physics Division includes reports on reactor safety modeling and assessment by members of the Reactor Safety Appraisals Section. Work on reactor core thermal-hydraulics is performed in ANL's Components Technology Division, emphasizing 3-dimensional code development for LMFBR accidents under natural convection conditions.

  2. Rigid Polyurethane Foam (RPF) Technology for Countermines (Sea) Program Phase II

    Energy Technology Data Exchange (ETDEWEB)

    WOODFIN,RONALD L.; FAUCETT,DAVID L.; HANCE,BRADLEY G.; LATHAM,AMY E.; SCHMIDT,C.O.

    1999-10-01

    This Phase II report documents the results of one subtask initiated under the joint Department of Energy (DOE)/Department of Defense (DoD) Memorandum of Understanding (MOU) for Countermine Warfare. The development of Rigid Polyurethane Foams for neutralization of mines and barriers in amphibious assault was the objective of the tasking. This phase of the program concentrated on formation of RPF in water, explosive mine simulations, and development of foam and fabric pontoons. Field experimentation was done primarily at the Energetic Materials Research and Testing Center (EMRTC) of the New Mexico Institute of Mining and Technology, Socorro, NM between February 1996 and September 1998.

  3. DOT/FAA Human Factors Workshop on Aviation. Transcript. Volume II.

    Science.gov (United States)

    1980-11-25

    tboe me o :k phese. 0-696614.6 0550 11 ,41. 11i evosts l~ w-osVo @0..1rJ I.I Clff * tIG5,05 5..* 0. 0.6 r- I 2S. resec Sa F*L16554 5 leo ..N 5ts~oleOS...Industry and manufac. transport aircraft. Capt Frits Brouwer , In calculating the probability of an turers support the view that human chairman of the...procedures Brouwer rests hi% argument on an *Influence of economic events demonstrates performance pro- assumed superiority of a three-man upon the

  4. Cultural Resources Investigations at Redstone Arsenal, Madison County, Alabama. Volume II.

    Science.gov (United States)

    1980-01-01

    I ARTIFACTI I U TEsI PI T. . AUGER HOLES " II IGIJRE 3t. fRIQIJLNCIY (HONIOUR MAP OF SITE IMa14?a SHOWING LOCATION OF rVI ; PITS AND AUGER HOLES.1 19...40 Mr 23. Doctoral Dissertation, University of North Carolina. 191h The Rose Island Site and bifurcate point tradition. Department of Anthropology...D. 11. 1q64a The Moundsville Phase and its position in Southeastern prehistory. Doctoral Dissertation, Harvard University. 1964b Houses of the

  5. MX Siting Investigation. Geotechnical Evaluation. Verification Study - Lake Valley, Nevada. Volume II. Geotechnical Data.

    Science.gov (United States)

    1981-07-31

    Graphic representation of the soil and rock Jtypes. I Et E-TR-27-LV-II 75 I G. USCS - Unified Soil Classification System (see Table 11-6-1 for...Dry Density and Moisture Content - The boring logs include a graphical display of laboratory test results for dry den- sity (ASTM D 2937-71) in...cikrreous; n nOnith 65 14 21 Gsi t ; little fine to cwse send: trace cob- 2 .a *o dese ble to 6" size; stae’M caliche (1.0’ - 2 , , ,2.01; stge"caliche (2.0Y

  6. The role of technology in reducing health care costs. Phase II and phase III.

    Energy Technology Data Exchange (ETDEWEB)

    Cilke, John F.; Parks, Raymond C.; Funkhouser, Donald Ray; Tebo, Michael A.; Murphy, Martin D.; Hightower, Marion Michael; Gallagher, Linda K.; Craft, Richard Layne, II; Garcia, Rudy John

    2004-04-01

    In Phase I of this project, reported in SAND97-1922, Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. The effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements and an economic analysis model for development of care pathway costs for two conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Phases II and III of this project, which are presented in this report, were directed at detailing the parameters of telemedicine that influence care delivery costs and quality. These results were used to identify and field test the communication, interoperability, and security capabilities needed for cost-effective, secure, and reliable health care via telemedicine.

  7. Geothermal fracture stimulation technology. Volume II. High-temperature proppant testing

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-01

    Data were obtained from a newly built proppant tester, operated at actual geothermal temperatures. The short term test results show that most proppants are temperature sensitive, particularly at the higher closure stresses. Many materials have been tested using a standard short-term test, i.e., fracture-free sand, bauxite, and a resin-coated sand retained good permeability at the high fluid temperatures in brine over a range of closure stresses. The tests were designed to simulate normal closure stress ranges for geothermal wells which are estimated to be from 2000 to 6000 psi. Although the ultra high closure stresses in oil and gas wells need not be considered with present geothermal resources, there is a definite need for chemically inert proppants that will retain high permeability for long time periods in the high temperature formations.

  8. Examining time trends in the Oldowan technology at Beds I and II, Olduvai Gorge.

    Science.gov (United States)

    Kimura, Yuki

    2002-09-01

    The lithic analysis of the Bed I and II assemblages from Olduvai Gorge reveals both static and dynamic time trends in early hominids' technology from 1.8 to 1.2 m.y.a. The Bed I Oldowan (1.87-1.75 m.y.a.) is characterized by the least effort strategy in terms of raw material exploitation and tool production. The inclusion of new raw material, chert, for toolmaking in the following Developed Oldowan A (DOA, 1.65-1.53 m.y.a.) facilitated more distinctive and variable flaking strategies depending on the kind of raw materials. The unique characters of DOA are explainable by this raw material factor, rather than technological development of hominids. The disappearance of chert in the subsequent Developed Oldowan B and Acheulian (1.53-1.2 m.y.a.) necessitated a shift in tool production strategy more similar to that of Bed I Oldowan than DOA. However, the evidence suggests that Bed II hominids might have been more skillful toolmakers, intensive tool-users, and engaged in more active transport of stone tools than the Bed I predecessors. Koobi Fora hominids maintained a more static tool-using behavior than their Olduvai counterparts due mainly to a stable supply of raw materials. They differed from Olduvai hominids in terms of less battering of cores, consistent transport behavior, and few productions of side-struck flakes, indicating a regional variation of toolmaking and using practice. However, they shared with Olduvai hominids a temporal trend toward the production of larger flakes from larger cores after 1.6 m.y.a. Increased intake of animal resources and the expansion of ranging area of Homo ergaster would have led to the development of technological organization. Technological changes in the Oldowan industry are attested at Olduvai Gorge, Koobi Fora, and Sterkfontein, suggesting that it was a pan-African synchronous phenomenon, beginning at 1.5 m.y.a.

  9. Capsicum--production, technology, chemistry, and quality--Part II. Processed products, standards, world production and trade.

    Science.gov (United States)

    Govindarajan, V S

    1986-01-01

    Capsicums, as a spice, have been known since the beginning of civilization and historically associated with the discovery of the New World. The genus Capsicum (Fam. Solanaceae) provides many varieties and adds color, pungency, and aroma to the cuisines of most of the world. From the pungent chilli, of interest also to pharmaceuticals, to the colorful paprika and the bell capsicums with its remarkable aroma, the genus has been of great interest for its chemistry and physiological action. Pungency as a sensory attribute, its evaluation, structure-activity relationship, and its increasing acceptance and preference by diverse populations of the world are of great interest to many research disciplines. In a comprehensive review of all aspects in four sequential parts, Part I deals with History, Botany, Cultivation, and Primary Processing (CRC Critical Review, Food Science and Nutrition). The Capsicums among the spices are second only to black pepper in trades both in volume and value. The production of the different forms of this spice as ground, specialty seasonings, and as the concentrated oleoresins through technologically advanced processes, proposed newer products, the standard to control quality of the different products, world production, trade, and prospects are reviewed in detail in this, Part II.

  10. Development of soil-structure interaction analysis method (II) - Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Chang, S. P.; Ko, H. M.; Park, H. K. and others [Seoul National Univ., Seoul (Korea, Republic of)

    1994-02-15

    This project includes following six items : free field analysis for the determination of site input motions, impedance analysis which simplifies the effects of soil-structure interaction by using lumped parameters, soil-structure interaction analysis including the material nonlinearity of soil depending on the level of strains, strong geometric nonlinearity due to the uplifting of the base, seismic analysis of underground structure such as varied pipes, seismic analysis of liquid storage tanks. Each item contains following contents respectively : state-of-the-art review on each item and data base construction on the past researches, theoretical review on the technology of soil-structure interaction analysis, proposing preferable technology and estimating the domestic applicability, proposing guidelines for evaluation of safety and analysis scheme.

  11. Industrial applications study. Volume II. Industrial data base. Final report. [Waste heat recovery and utilization

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Harry L.; Hamel, Bernard B.; Karamchetty, Som; Steigelmann, William H.; Gajanana, Birur C.; Agarwal, Anil P.; Klock, Lawrence W.; Henderson, James M.; Calobrisi, Gary; Hedman, Bruce A.; Koluch, Michael; Biancardi, Frank; Bass, Robert; Landerman, Abraham; Peters, George; Limaye, Dilip; Price, Jeffrey; Farr, Janet

    1976-12-01

    An initial evaluation of the waste heat recovery and utilization potential in the manufacturing portion of the industrial sector is presented. The scope of this initial phase addressed the feasibility of obtaining in-depth energy information in the industrial sector. Within this phase, the methodology and approaches for data gathering and assessment were established. Using these approaches, energy use and waste heat profiles were developed at the 2-digit level; with this data, waste heat utilization technologies were evaluated.

  12. Journal of Sustainable Development of Energy, Water and Environment Systems - Volume II

    OpenAIRE

    Neven Duić

    2014-01-01

    The Journal of Sustainable Development of Energy, Water and Environment Systems – JSDEWES is an international journal dedicated to the improvement and dissemination of knowledge on methods, policies and technologies for increasing the sustainability of development by de-coupling growth from natural resources and replacing them with knowledge based economy, taking into account its economic, environmental and social pillars, as well as methods for assessing and measuring sustainability of devel...

  13. Subsonic Ultra Green Aircraft Research. Phase II - Volume I; Truss Braced Wing Design Exploration

    Science.gov (United States)

    Bradley, Marty K.; Droney, Christopher K.; Allen, Timothy J.

    2015-01-01

    This report summarizes the Truss Braced Wing (TBW) work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team, consisting of Boeing Research and Technology, Boeing Commercial Airplanes, General Electric, Georgia Tech, Virginia Tech, NextGen Aeronautics, and Microcraft. A multi-disciplinary optimization (MDO) environment defined the geometry that was further refined for the updated SUGAR High TBW configuration. Airfoil shapes were tested in the NASA TCT facility, and an aeroelastic model was tested in the NASA TDT facility. Flutter suppression was successfully demonstrated using control laws derived from test system ID data and analysis models. Aeroelastic impacts for the TBW design are manageable and smaller than assumed in Phase I. Flutter analysis of TBW designs need to include pre-load and large displacement non-linear effects to obtain a reasonable match to test data. With the updated performance and sizing, fuel burn and energy use is reduced by 54% compared to the SUGAR Free current technology Baseline (Goal 60%). Use of the unducted fan version of the engine reduces fuel burn and energy by 56% compared to the Baseline. Technology development roadmaps were updated, and an airport compatibility analysis established feasibility of a folding wing aircraft at existing airports.

  14. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, C. LEE COOK DIVISION, DOVER CORPORATION, STATIC PAC (TM) SYSTEM, PHASE II REPORT

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Static Pac System, Phase II, natural gas reciprocating compressor rod packing manufactured by the C. Lee Cook Division, Dover Corporation. The Static Pac System is designed to seal th...

  15. Proceedings of the sixth international conference on fluidized bed combustion. Volume II. Technical sessions

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-08-01

    The Sixth International Conference on Fluidized Bed Combustion was held April 9-11, 1980, at the Atlanta Hilton, Atlanta, Georgia. It was sponsored by the US Department of Energy, the Electric Power Research Institute, the US Environmental Protection Agency, and the Tennessee Valley Authority. The papers covered recent developments in atmospheric and pressurized fluidized-bed combustion, especially the design, operation and control of pilot and demonstration plants. The cleanup of combustion products and the erosion, corrosion and fouling of gas turbines was emphasized also. Fifty-five papers from Volume 2 of the proceedings have been entered individually into EDB and ERA; five papers had been entered previously from other sources. (LTN)

  16. High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems; Volume 6 Building America Best Practices Series

    Energy Technology Data Exchange (ETDEWEB)

    None

    2007-06-01

    The sixth volume of the Building America Best Practices Series presents information that is useful throughout the U.S. for enhancing the energy efficiency practices in the specific climate zones that are presented in each of the volumes.

  17. Department of Defense Contractor Establishment Code (CEC). Alphabet Listing. Volume II

    Science.gov (United States)

    1992-11-01

    Cix I_ C- hi W 2 2. hi 0 0 4Y -: IWO~z m- hi C.> :3 . U-4 0h 0q 1 i >0 0 1 -_ .. i.-I 0 4 34~~N 0 .-. 0 .- I- Z ChiCO 0.0W 00hi ir 02 0. v4 co ~ 0 -3Y0...go ot~zm ." .8 ~ 6 A:3" 6i22 44 W 04> < j02~ .Z0 0-4>. w .- O- g4) L)C U) 0 ba. 04 4c’J N 0 oo0ul i 4c4 coB 2,W a. lcj i 4 LOLA 0 8. W. iO E 0 0-coi

  18. Solvent-refined-coal (SRC) process. Volume II. Sections V-XIV. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-05-01

    This report documents the completion of development work on the Solvent Refined Coal Process by The Pittsburgh and Midway Coal Mining Co. The work was initiated in 1966 under Office of Coal Research, US Department of Interior, Contract No. 14-01-0001-496 and completed under US Department of Energy Contract No. DE-AC05-79ET10104. This report discusses work leading to the development of the SRC-I and SRC-II processes, construction of the Fort Lewis Pilot Plant for the successful development of these processes, and results from the operation of this pilot plant. Process design data generated on a 1 ton-per-day Process Development Unit, bench-scale units and through numerous research projects in support of the design of major demonstration plants are also discussed in summary form and fully referenced in this report.

  19. Solvency II and XBRL: New Rules and Technologies in Insurance Supervision

    Directory of Open Access Journals (Sweden)

    Enrique BONSON

    2008-11-01

    Full Text Available Purpose – the aim of this paper is to analyze the way in which the insurance industry is confronting the renewal of its regulatory framework with respect to the levels of solvency that insurance entities should maintain, and how technological initiatives in general, and the implementation of the eXtensible Business Reporting Language (XBRL mark-up language in particular, are making a key contribution to the process of adaptation to the new regulation. Design/methodology/approach – In this general review, we analyse the particular advantages that the application of the XBRL standard can offer in this process, and highlight new lines for further research. Findings – In this scenario, it is becoming urgent to have available a technological system such XBRL, that provides support to the important and periodical operations of consolidation of financial information, and to ensure the digital transparency of the insurer organisations that are engaged in this new regulatory challenge. Practical implications – XBRL represents the key resource for the information support used in the European COREP project for implementation of Basle II in the Union, so, the implementation of Solvency II can take full advantage of this previous experience. For that reason, a proposal for action is incorporated. Originality/value – the affiliation of the authors to the insurance sector, the academia and the XBRL community contributes to a complete view of the possibilities of this breaking project.

  20. Portable microcomputer for the analysis of plutonium gamma-ray spectra. Volume II. Software description and listings. [IAEAPU

    Energy Technology Data Exchange (ETDEWEB)

    Ruhter, W.D.

    1984-05-01

    A portable microcomputer has been developed and programmed for the International Atomic Energy Agency (IAEA) to perform in-field analysis of plutonium gamma-ray spectra. The unit includes a 16-bit LSI-11/2 microprocessor, 32-K words of memory, a 20-character display for user prompting, a numeric keyboard for user responses, and a 20-character thermal printer for hard-copy output of results. The unit weights 11 kg and has dimensions of 33.5 x 30.5 x 23.0 cm. This compactness allows the unit to be stored under an airline seat. Only the positions of the 148-keV /sup 241/Pu and 208-keV /sup 237/U peaks are required for spectral analysis that gives plutonium isotopic ratios and weight percent abundances. Volume I of this report provides a detailed description of the data analysis methodology, operation instructions, hardware, and maintenance and troubleshooting. Volume II describes the software and provides software listings.

  1. Analysis of the permitting processes associated with exploration of Federal OCS leases. Final report. Volume II. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    Under contract to the Office of Leasing Policy Development (LPDO), Jack Faucett Associates is currently undertaking the description and analysis of the Outer Continental Shelf (OCS) regulatory process to determine the nature of time delays that affect OCS production of oil and gas. This report represents the results of the first phase of research under this contract, the description and analysis of regulatory activity associated with exploration activities on the Federal OCS. Volume 1 contains the following three sections: (1) study results; (2) Federal regulatory activities during exploration of Federal OCS leases which involved the US Geological Survey, Environmental Protection Agency, US Coast Guard, Corps of Engineers, and National Ocean and Atmospheric Administration; and (3) state regulatory activities during exploration of Federal OCS leases of Alaska, California, Louisiana, Massachusetts, New Jersey, North Carolina and Texas. Volume II contains appendices of US Geological Survey, Environmental Protection Agency, Coast Guard, Corps of Engineers, the Coastal Zone Management Act, and Alaska. The major causes of delay in the regulatory process governing exploration was summarized in four broad categories: (1) the long and tedious process associated with the Environmental Protection Agency's implementation of the National Pollutant Discharge Elimination System Permit; (2) thelack of mandated time periods for the completion of individual activities in the permitting process; (3) the lack of overall coordination of OCS exploratory regulation; and (4) the inexperience of states, the Federal government and industry relating to the appropriate level of regulation for first-time lease sale areas.

  2. Site characterization report for the basalt waste isolation project. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-11-01

    The reference location for a repository in basalt for the terminal storage of nuclear wastes on the Hanford Site and the candidate horizons within this reference repository location have been identified and the preliminary characterization work in support of the site screening process has been completed. Fifteen technical questions regarding the qualification of the site were identified to be addressed during the detailed site characterization phase of the US Department of Energy-National Waste Terminal Storage Program site selection process. Resolution of these questions will be provided in the final site characterization progress report, currently planned to be issued in 1987, and in the safety analysis report to be submitted with the License Application. The additional information needed to resolve these questions and the plans for obtaining the information have been identified. This Site Characterization Report documents the results of the site screening process, the preliminary site characterization data, the technical issues that need to be addressed, and the plans for resolving these issues. Volume 2 contains chapters 6 through 12: geochemistry; surface hydrology; climatology, meteorology, and air quality; environmental, land-use, and socioeconomic characteristics; repository design; waste package; and performance assessment.

  3. Feasibility evaluation solar heated textile process water. Volume II. Appendices. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hester, J. C.; Beard, J. N.; Robinson, G. F.; Harnett, R. M.

    1977-02-01

    The general objectives of this study are to determine the technical and economic feasibility of the use of solar energy for heating waters in the textile industry and to develop a plan for efforts beyond this feasibility study phase. Specific objectives include (1) determine the industry requirements for heated process water, (2) assess particular schemes and their economic impact, (3) study the total cost environment for solar water heating in this industry, and (4) recommend future experiments. This volume contains the appendices: (A) fiber distribution and end use data; (B) computer model description for textile plant energy balances; (C) computer model description to generate local solar potential; (D) computer model description for system synthesis and analysis; (E) computer model to determine pressure drop, flow distribution and plumbing components; (F) area requirement plots for various use rates, temperature levels, seasons, orientations and collector types for textile operations; (G) computer model description of economic variables for COSMO1 and COSMO2; (H) rate of return plots for various textile applications and energy cost scenerios; and (I) data base for efficiency curves for six collector types. (WHK)

  4. Safety analysis report for the TRUPACT-II shipping package (condensed version). Volume 2, Rev. 14

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-01

    This appendix determines the effective G values for payload shipping categories of contact handled transuranic (CH-TRU) waste materials, based on the radiolytic G values for waste materials that are discussed in detail in Appendix 3.6.8 of the Safety Analysis Report for the TRUPACT-II Shipping Package. The effective G values take into account self-absorption of alpha decay energy inside particulate contamination and the fraction of energy absorbed by nongas-generating materials. As described in Appendix 3.6.8, an effective G value, G{sub eff}, is defined by: G{sub eff} - {Sigma}{sub M} (F{sub M} x G{sub M}) F{sub M}-fraction of energy absorbed by material maximum G value for a material where the sum is over all materials present inside a waste container. The G value itself is determined primarily by the chemical properties of the material and its temperature. The value of F is determined primarily by the size of the particles containing the radionuclides, the distribution of radioactivity on the various materials present inside the waste container, and the stopping distance of alpha particles in air, in the waste materials, or in the waste packaging materials.

  5. Blast Noise Prediction. Volume II. BNOISE 3.2 Computer Program Description and Program Listing.

    Science.gov (United States)

    1981-03-01

    spec:itied grid si/c For example, it the x \\alues ofI hounds \\A~ere 20,000 and 4 *Ii1iii ind d i < - vii si/e~ 2000t. thein ihe nev, hounds; ire 20000 ) and...Tor he iied InI L,1LUiing he Itil S I I *I hIre C u ’cFrt I ~ ~ c (hi)I IMJ CS,\\Th can he LISedL Ir t iICUlitirig hW inilti CXjIMSHIf depend1InIfg 01n...0 C - 0 00 0 * 0 NCU’C 04 0 C0 L.LL.J04N0U𔃺 a00W�NN01iCCL.aCLLJ-4U’C.f’-...LO .400C00~- N V ’C SOON CC C P00 ZOU’CONON 20000 -.0,.iOZCZ.W󈧄-.ZN

  6. A Report to Congress on Long-Term Stewardship. Volume II, Site Summaries

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2001-01-01

    During World War II and the Cold War, the Federal government developed and operated a vast network of industrial facilities for the research, production, and testing of nuclear weapons, as well as for other scientific and engineering research. These processes left a legacy of radioactive and chemical waste, environmental contamination, and hazardous facilities and materials at well over a 100 sites in 30 States and one U.S. Territory. Hundreds of thousand of acres of residually contaminated soils, contaminated groundwater, surface water and sediment contamination, and contaminated buildings are present at many sites across the country. These sites range in size from less than one acre, containing only a single facility, to large sites spanning over 100,000 acres with huge uranium enrichment plants and plutonium processing canyons. Since 1989, the U.S. Department of Energy’s (DOE) Environmental Management (EM) program has made significant progress in addressing this environmental legacy. Millions of cubic meters of waste have been removed, stabilized, or disposed of, resulting in significant risk and cost reduction. In addition, DOE began disposing of transuranic (i.e., plutonium-contaminated) waste in the nation’s first deep geologic repository – the Waste Isolation Pilot Plant in New Mexico. DOE is now carrying out its long-term stewardship obligations at dozens of sites, including smaller sites where DOE has completed cleanup work for the entire site and many larger sites where DOE has remediated portions of the site.

  7. Energy use in the marine transportation industry: Task II. Regulations and Tariffs. Final report, Volume III

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    The evaluation of the energy impacts of regulations and tariffs is structured around three sequential steps: identification of agencies and organizations that impact the commercial marine transportation industry; identification of existing or proposed regulations that were perceived to have a significant energy impact; and quantification of the energy impacts. Following the introductory chapter, Chapter II describes the regulatory structure of the commercial marine transportation industry and includes a description of the role of each organization and the legislative basis for their jurisdiction and an identification of major areas of regulation and those areas that have an energy impact. Chapters III through IX each address one of the 7 existing or proposed regulatory or legislative actions that have an energy impact. Energy impacts of the state of Washington's tanker regulations, of tanker segregated ballast requirements, of inland waterway user charges, of cargo pooling and service rationalization, of the availability of intermodal container transportation services, of capacity limitations at lock and dam 26 on the Mississippi River and the energy implications of the transportation alternatives available for the West Coast crude oil supplies are discussed. (MCW)

  8. Status of volcanic hazard studies for the Nevada Nuclear Waste Storage Investigations. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Crowe, B.M.; Wohletz, K.H.; Vaniman, D.T.; Gladney, E.; Bower, N.

    1986-01-01

    Volcanic hazard investigations during FY 1984 focused on five topics: the emplacement mechanism of shallow basalt intrusions, geochemical trends through time for volcanic fields of the Death Valley-Pancake Range volcanic zone, the possibility of bimodal basalt-rhyolite volcanism, the age and process of enrichment for incompatible elements in young basalts of the Nevada Test Site (NTS) region, and the possibility of hydrovolcanic activity. The stress regime of Yucca Mountain may favor formation of shallow basalt intrusions. However, combined field and drill-hole studies suggest shallow basalt intrusions are rare in the geologic record of the southern Great Basin. The geochemical patterns of basaltic volcanism through time in the NTS region provide no evidence for evolution toward a large-volume volcanic field or increases in future rates of volcanism. Existing data are consistent with a declining volcanic system comparable to the late stages of the southern Death Valley volcanic field. The hazards of bimodal volcanism in this area are judged to be low. The source of a 6-Myr pumice discovered in alluvial deposits of Crater Flat has not been found. Geochemical studies show that the enrichment of trace elements in the younger rift basalts must be related to an enrichment of their mantle source rocks. This geochemical enrichment event, which may have been metasomatic alteration, predates the basalts of the silicic episode and is, therefore, not a young event. Studies of crater dimensions of hydrovolcanic landforms indicate that the worst case scenario (exhumation of a repository at Yucca Mountain by hydrovolcanic explosions) is unlikely. Theoretical models of melt-water vapor explosions, particularly the thermal detonation model, suggest hydrovolcanic explosion are possible at Yucca Mountain. 80 refs., 21 figs., 5 tabs.

  9. Fuel Quality/Processing Study. Volume II. Appendix, Task I, literature survey

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J B; Bela, A; Jentz, N E; Klumpe, H W; Kessler, R E; Kotzot, H T; Loran, B I

    1981-04-01

    This activity was begun with the assembly of information from Parsons' files and from contacts in the development and commercial fields. A further more extensive literature search was carried out using the Energy Data Base and the American Petroleum Institute Data Base. These are part of the DOE/RECON system. Approximately 6000 references and abstracts were obtained from the EDB search. These were reviewed and the especially pertinent documents, approximately 300, were acquired in the form of paper copy or microfiche. A Fuel Properties form was developed for listing information pertinent to gas turbine liquid fuel properties specifications. Fuel properties data for liquid fuels from selected synfuel processes, deemed to be successful candidates for near future commercial plants were tabulated on the forms. The processes selected consisted of H-Coal, SRC-II and Exxon Donor Solvent (EDS) coal liquefaction processes plus Paraho and Tosco shale oil processes. Fuel properties analyses for crude and distillate syncrude process products are contained in Section 2. Analyses representing synthetic fuels given refinery treatments, mostly bench scale hydrotreating, are contained in Section 3. Section 4 discusses gas turbine fuel specifications based on petroleum source fuels as developed by the major gas turbine manufacturers. Section 5 presents the on-site gas turbine fuel treatments applicable to petroleum base fuels impurities content in order to prevent adverse contaminant effects. Section 7 relates the environmental aspects of gas turbine fuel usage and combustion performance. It appears that the near future stationary industrial gas turbine fuel market will require that some of the synthetic fuels be refined to the point that they resemble petroleum based fuels.

  10. Fuel Quality/Processing Study. Volume II. Appendix, Task I, literature survey

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J B; Bela, A; Jentz, N E; Klumpe, H W; Kessler, R E; Kotzot, H T; Loran, B I

    1981-04-01

    This activity was begun with the assembly of information from Parsons' files and from contacts in the development and commercial fields. A further more extensive literature search was carried out using the Energy Data Base and the American Petroleum Institute Data Base. These are part of the DOE/RECON system. Approximately 6000 references and abstracts were obtained from the EDB search. These were reviewed and the especially pertinent documents, approximately 300, were acquired in the form of paper copy or microfiche. A Fuel Properties form was developed for listing information pertinent to gas turbine liquid fuel properties specifications. Fuel properties data for liquid fuels from selected synfuel processes, deemed to be successful candidates for near future commercial plants were tabulated on the forms. The processes selected consisted of H-Coal, SRC-II and Exxon Donor Solvent (EDS) coal liquefaction processes plus Paraho and Tosco shale oil processes. Fuel properties analyses for crude and distillate syncrude process products are contained in Section 2. Analyses representing synthetic fuels given refinery treatments, mostly bench scale hydrotreating, are contained in Section 3. Section 4 discusses gas turbine fuel specifications based on petroleum source fuels as developed by the major gas turbine manufacturers. Section 5 presents the on-site gas turbine fuel treatments applicable to petroleum base fuels impurities content in order to prevent adverse contaminant effects. Section 7 relates the environmental aspects of gas turbine fuel usage and combustion performance. It appears that the near future stationary industrial gas turbine fuel market will require that some of the synthetic fuels be refined to the point that they resemble petroleum based fuels.

  11. Combined cycle solar central receiver hybrid power system study. Final technical report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-11-01

    This study develops the conceptual design for a commercial-scale (nominal 100 MWe) central receiver solar/fossil fuel hybrid power system with combined cycle energy conversion. A near-term, metallic heat pipe receiver and an advanced ceramic tube receiver hybrid system are defined through parametric and market potential analyses. Comparative evaluations of the cost of power generation, the fuel displacement potential, and the technological readiness of these two systems indicate that the near-term hybrid system has better potential for commercialization by 1990. Based on the assessment of the conceptual design, major cost and performance improvements are projected for the near-term system. Constraints preventing wide-spread use were not identified. Energy storage is not required for this system and analyses show no economic advantages with energy storage provisions. It is concluded that the solar hybrid system is a cost effective alternative to conventional gas turbines and combined cycle generating plants, and has potential for intermediate-load market penetration at 15% annual fuel escalation rate. Due to their flexibility, simple solar/nonsolar interfacing, and short startup cycles, these hybrid plants have significant operating advantages. Utility company comments suggest that hybrid power systems will precede stand-alone solar plants.

  12. Biotechnology for producing fuels and chemicals from biomass. Volume II. Fermentation chemicals from biomass

    Energy Technology Data Exchange (ETDEWEB)

    Villet, R. (ed.)

    1981-02-01

    The technological and economic feasibility of producing some selected chemicals by fermentation is discussed: acetone, butanol, acetic acid, citric acid, 2,3-butanediol, and propionic acid. The demand for acetone and butanol has grown considerably. They have not been produced fermentatively for three decades, but instead by the oxo and aldol processes. Improved cost of fermentative production will hinge on improving yields and using cellulosic feedstocks. The market for acetic acid is likely to grow 5% to 7%/yr. A potential process for production is the fermentation of hydrolyzed cellulosic material to ethanol followed by chemical conversion to acetic acid. For about 50 years fermentation has been the chief process for citric acid production. The feedstock cost is 15% to 20% of the overall cost of production. The anticipated 5%/yr growth in demand for citric acid could be enhanced by using it to displace phosphates in detergent manufacture. A number of useful chemicals can be derived from 2,3-butanediol, which has not been produced commercially on a large scale. R and D are needed to establish a viable commercial process. The commercial fermentative production of propionic acid has not yet been developed. Recovery and purification of the product require considerable improvement. Other chemicals such as lactic acid, isopropanol, maleic anhydride, fumarate, and glycerol merit evaluation for commercial fermentative production in the near future.

  13. Subsonic Ultra Green Aircraft Research: Phase II- Volume III-Truss Braced Wing Aeroelastic Test Report

    Science.gov (United States)

    Bradley, Marty K.; Allen, Timothy J.; Droney, Christopher

    2014-01-01

    This Test Report summarizes the Truss Braced Wing (TBW) Aeroelastic Test (Task 3.1) work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team, which includes the time period of February 2012 through June 2014. The team consisted of Boeing Research and Technology, Boeing Commercial Airplanes, Virginia Tech, and NextGen Aeronautics. The model was fabricated by NextGen Aeronautics and designed to meet dynamically scaled requirements from the sized full scale TBW FEM. The test of the dynamically scaled SUGAR TBW half model was broken up into open loop testing in December 2013 and closed loop testing from January 2014 to April 2014. Results showed the flutter mechanism to primarily be a coalescence of 2nd bending mode and 1st torsion mode around 10 Hz, as predicted by analysis. Results also showed significant change in flutter speed as angle of attack was varied. This nonlinear behavior can be explained by including preload and large displacement changes to the structural stiffness and mass matrices in the flutter analysis. Control laws derived from both test system ID and FEM19 state space models were successful in suppressing flutter. The control laws were robust and suppressed flutter for a variety of Mach, dynamic pressures, and angle of attacks investigated.

  14. Seismic design technology for Breeder Reactor structures. Volume 3: special topics in reactor structures

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P. (ed)

    1983-04-01

    This volume is divided into six chapters: analysis techniques, equivalent damping values, probabilistic design factors, design verifications, equivalent response cycles for fatigue analysis, and seismic isolation. (JDB)

  15. Task Descriptions in Diagnostic Radiology. Research Report No. 7. Volume 2, Radiologic Technologist Tasks Dealing with Patient Procedures. Part II: Tasks 387 through 526.

    Science.gov (United States)

    Gilpatrick, Eleanor

    Part II of the second of four volumes in Research Report No. 7 of the Health Services Mobility Study (HSMS), this book is the remainder of Chapter 3, which contains 76 task descriptions covering most of the medical activities carried out by radiologic technologists. The steps of the task descriptions are presented in logical sequence in…

  16. Prediction of Supersonic Store Separation Characteristics Including Fuselage and Stores of Noncircular Cross Section, Volume IV. Appendices C and D, Details of Program II.

    Science.gov (United States)

    1980-11-01

    VOLUME IV - APPENDICES C AND D, DETAILS OF PROGRAM II Joseph Mullen, Jr. Frederick K. Goodwin Marnix F. E. Dillenius Nielsen Engineering & Research...location in store source panel coordinates of leading edge of wing, feet RAZ semi-axis in vertical direction of elliptic body, feet RBY semi-axis in

  17. The space shuttle payload planning working groups. Volume 10: Space technology

    Science.gov (United States)

    1973-01-01

    The findings and recommendations of the Space Technology group of the space shuttle payload planning activity are presented. The elements of the space technology program are: (1) long duration exposure facility, (2) advanced technology laboratory, (3) physics and chemistry laboratory, (4) contamination experiments, and (5) laser information/data transmission technology. The space technology mission model is presented in tabular form. The proposed experiments to be conducted by each test facility are described. Recommended approaches for user community interfacing are included.

  18. Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology Presented at the Annual Convention of the Association for Educational Communications and Technology (33rd, Anaheim, California, 2010). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2010-01-01

    For the thirty-third year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. This is Volume #2 of the 33rd "Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology." This volume includes…

  19. Double knockout of carbonic anhydrase II (CAII) and Na(+)-Cl(-) cotransporter (NCC) causes salt wasting and volume depletion.

    Science.gov (United States)

    Xu, Jie; Barone, Sharon; Brooks, Mary-Beth; Soleimani, Manoocher

    2013-01-01

    The thiazide-sensitive Na(+)-Cl(-) cotransporter NCC and the Cl(-)/HCO3(-)exchanger pendrin are expressed on apical membranes of distal cortical nephron segments and mediate salt absorption, with pendrin working in tandem with the epithelial Na(+) channel (ENaC) and the Na(+)-dependent chloride/bicarbonate exchanger (NDCBE), whereas NCC is working by itself. A recent study showed that NCC and pendrin compensate for loss of each other under basal conditions, therefore masking the role that each plays in salt reabsorption. Carbonic anhydrase II (CAII, CA2 or CAR2) plays an important role in acid-base transport and salt reabsorption in the proximal convoluted tubule and acid-base transport in the collecting duct. Animals with CAII deletion show remodeling of intercalated cells along with the downregulation of pendrin. NCC KO mice on the other hand show significant upregulation of pendrin and ENaC. Neither model shows any significant salt wasting under baseline conditions. We hypothesized that the up-regulation of pendrin is essential for the prevention of salt wasting in NCC KO mice. To test this hypothesis, we generated NCC/CAII double KO (dKO) mice by crossing mice with single deletion of NCC and CAII. The NCC/CAII dKO mice displayed significant downregulation of pendrin, along with polyuria and salt wasting. As a result, the dKO mice developed volume depletion, which was associated with the inability to concentrate urine. We conclude that the upregulation of pendrin is essential for the prevention of salt and water wasting in NCC deficient animals and its downregulation or inactivation will result in salt wasting, impaired water conservation and volume depletion in the setting of NCC inactivation or inhibition. © 2014 S. Karger AG, Basel.

  20. Activation volume measurement for C[bond]H activation. Evidence for associative benzene substitution at a platinum(II) center.

    Science.gov (United States)

    Procelewska, Joanna; Zahl, Achim; van Eldik, Rudi; Zhong, H Annita; Labinger, Jay A; Bercaw, John E

    2002-06-03

    The reaction of the platinum(II) methyl cation [(N-N)Pt(CH(3))(solv)](+) (N-N = ArN[double bond]C(Me)C(Me)[double bond]NAr, Ar = 2,6-(CH(3))(2)C(6)H(3), solv = H(2)O (1a) or TFE = CF(3)CH(2)OH (1b)) with benzene in TFE/H(2)O solutions cleanly affords the platinum(II) phenyl cation [(N-N)Pt(C(6)H(5))(solv)](+) (2). High-pressure kinetic studies were performed to resolve the mechanism for the entrance of benzene into the coordination sphere. The pressure dependence of the overall second-order rate constant for the reaction resulted in Delta V(++) = -(14.3 +/- 0.6) cm(3) mol(-1). Since the overall second order rate constant k = K(eq)k(2), Delta V(++) = Delta V degrees (K(eq)) + Delta V(++)(k(2)). The thermodynamic parameters for the equilibrium constant between 1a and 1b, K(eq) = [1b][H(2)O]/[1a][TFE] = 8.4 x 10(-4) at 25 degrees C, were found to be Delta H degrees = 13.6 +/- 0.5 kJ mol(-1), Delta S degrees = -10.4 +/- 1.4 J K(-1) mol(-1), and Delta V degrees = -4.8 +/- 0.7 cm(3) mol(-1). Thus DeltaV(++)(k(2)) for the activation of benzene by the TFE solvento complex equals -9.5 +/- 1.3 cm(3) mol(-1). This significantly negative activation volume, along with the negative activation entropy for the coordination of benzene, clearly supports the operation of an associative mechanism.

  1. Idaho National Engineering Laboratory waste area groups 1--7 and 10 Technology Logic Diagram. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Technology Logic Diagram was developed to provide technical alternatives for environmental restoration projects at the Idaho National Engineering Laboratory. The diagram (three volumes) documents suggested solutions to the characterization, retrieval, and treatment phases of cleanup activities at contaminated sites within 8 of the laboratory`s 10 waste area groups. Contaminated sites at the laboratory`s Naval Reactor Facility and Argonne National Laboratory-West are not included in this diagram.

  2. Chained lightning, part II: neurosurgical principles, radiosurgical technology, and the manipulation of energy beam delivery.

    Science.gov (United States)

    Hoh, Daniel J; Liu, Charles Y; Chen, Joseph C T; Pagnini, Paul G; Yu, Cheng; Wang, Michael Y; Apuzzo, Michael L J

    2007-09-01

    The fundamental principle in the radiosurgical treatment of neurological conditions is the delivery of energy to a lesion with minimal injury to surrounding structures. The development of radiosurgical techniques from Leksell's original design has focused on the refinement of various methodologies to achieve energy containment within a target. This article is the second in a series reviewing the evolution of radiosurgical instruments with respect to issues of energy beam generation and delivery for improved conformal therapy. Continuing with concepts introduced in an earlier article, this article examines specific aspects of beam delivery and the emergence of stereotactic radiosurgery as a measure for focusing energy beams within a target volume. The application of stereotactic principles and devices to gamma ray and linear accelerator-based energy sources provides the methodology by which energy beams are generated and targeted precisely in a focal lesion. Advanced technological systems are reviewed, including fixed beams, dynamic radiosurgery, multileaf collimation, beam shaping, and robotics as various approaches for manipulating beam delivery. Radiosurgical instruments are also compared with regard to mechanics, geometry, and dosimetry. Finally, new radiosurgical designs currently on the horizon are introduced. In exploring the complex history of radiosurgery, it is evident that the discovery and rediscovery of ideas invariably leads to the development of innovative technology for the next generation.

  3. GEOSS Architecture Implementation Pilot-II: Integrating Technologies and Expertise to Build GEOSS

    Science.gov (United States)

    Robinson, E. M.; Husar, R. B.; Falke, S. R.; McCabe, D. C.; Menard, L.; Wald, L.; Warnock, A.

    2009-12-01

    There are numerous, distributed Earth observations that are in principle available and useful for societal benefit applications such as analysis of air quality events or renewable energy. Currently, Earth observation providers face challenges efficiently disseminating data to users in needed formats. Data users also face hurdles in finding, accessing, and using the right Earth observations for their needs. GEOSS is designed to reduce the burden on both the provider and the user, by providing easier data discovery and access to distributed resources through standard protocols and open architecture. The GEOSS Architecture Implementation Pilot-II (AIP-II) was organized with workgroups for societal benefit areas (SBAs) and transverse technologies (TTs). The SBA workgroups used their domain expertise to test end-to-end flow of data and metadata from data providers to data users with specific application needs. GEOSS mandates that metadata and data are registered using standard protocols such as WMS and WCS for data access and ISO 19115 and 19119 for metadata. These standards allowed the data being registered in community catalogs to be findable in the GEOSS Clearinghouse and automatically accessible through WMS viewers and other tools. The TT workgroups tied the diverse SBAs together by helping the SBAs implement standards for data access and metadata and develop common tools and methods that could be used by the SBAs. The TT workgroups laid out a set of use cases which provide a framework for different groups to add components that aided the end-to-end flow of data to the user. Collaboratively, the workgroups implemented the use cases and developed and refined the processes of deploying, documenting, and registering data through the GEOSS Common Infrastructure (GCI) for use in societal benefit area applications. The SBA and TT workgroups were connected through weekly discussions, and the work was captured using an online collaborative workspace. This allowed SBA

  4. Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

    Science.gov (United States)

    Krishen, Kumar (Compiler)

    1994-01-01

    This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

  5. Cardiac tamponade due to low-volume effusive constrictive pericarditis in a patient with uncontrolled type II autoimmune polyglandular syndrome.

    Science.gov (United States)

    Palmer, William C; Kurklinsky, Andrew; Lane, Gary; Ussavarungsi, Kamonpun; Blackshear, Joseph L

    2014-03-01

    Type II autoimmune polyglandular syndrome (APS), a relatively common endocrine disorder, includes primary adrenal insufficiency coupled with type 1 diabetes mellitus and/or autoimmune primary hypothyroidism. Autoimmune serositis, an associated disease, may present as symptomatic pericardial effusion. We present a case of a 54-year old male with APS who developed pericarditis leading to cardiac tamponade with a subacute loculated effusion. After urgent pericardiocentesis intrapericardial pressure dropped to 0, while central venous pressures remain elevated, consistent with acute effusive constrictive pericarditis. Contrast computerized tomography confirmed increased pericardial contrast enhancement. The patient recovered after prolonged inotropic support and glucocorticoid administration. He re-accumulated the effusion 16 days later, requiring repeat pericardiocentesis. Effusive-constrictive pericarditis, an uncommon pericardial syndrome, is characterized by simultaneous pericardial inflammation and tamponade. Prior cases of APS associated with cardiac tamponade despite low volumes of effusion have been reported, albeit without good demonstration of hemodynamic findings. We report a case of APS with recurrent pericardial effusion due to pericarditis and marked hypotension with comprehensive clinical and hemodynamic assessment. These patients may require aggressive support with pericardiocentesis, inotropes, and hormone replacement therapy. They should be followed closely for recurrent tamponade.

  6. Black liquor combustion validated recovery boiler modeling: Final year report. Volume 2 (Appendices I, section 5 and II, section 1)

    Energy Technology Data Exchange (ETDEWEB)

    Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

    1998-08-01

    This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 2 contains the last section of Appendix I, Radiative heat transfer in kraft recovery boilers, and the first section of Appendix II, The effect of temperature and residence time on the distribution of carbon, sulfur, and nitrogen between gaseous and condensed phase products from low temperature pyrolysis of kraft black liquor.

  7. Final programmatic environmental impact statement for the uranium mill tailings remedial action ground water project. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-10-01

    Volume II of the programmatic environmental impact statement (PElS) is a comment and response document; it is the collection of the comments received on the draft PElS. The U.S. Department of Energy's (DOE) response to each comment is provided after each comment. If the comment resulted in a change to the PElS, the affected section number of the PElS is provided in the response. Comments 1 through 259 were received at public hearings. The name of the hearing at which the comment was received is listed after each comment. Comments were recorded on flip charts and by notetakers. DOE representatives were present to hear the comments and respond to them. The DOE's written response is provided after each comment. Comments 260 through 576 were received in writing at the hearings, and from various federal, tribal, and state agencies and from individuals during the public comment period. Copies of the written comments follow the comments and responses.

  8. High-temperature-turbine technology program. Phase II. Technology test and support studies. Technical progress report, April 1, 1979-June 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-01

    Work performed on the High-Temperature-Turbine Technology Program, Phase II-Technology Test and Support Studies during the period from 1 April 1979 through 30 June 1979 is summarized. Objectives of the program elements as well as technical progress and problems during this Phase II quarterly reporting period are presented. Planned progress during the next quarterly reporting period is also defined. Testing of the LP rig engine with hot gas stream particulates simulating operation on low Btu gas is described. Fabrication of components and preparation of facilities for future tests of the Turbine Spool Technology Rig are discussed together with analytical reviews. Preparation of the low Btu gas synthesizing facility is discussed. Supporting Materials and Process investigations are described.

  9. Limb volume measurement: from the past methods to optoelectronic technologies, bioimpedance analysis and laser based devices.

    Science.gov (United States)

    Cavezzi, A; Schingale, F; Elio, C

    2010-10-01

    Accurate measurement of limb volume is considered crucial to lymphedema management. Various non-invasive methods may be used and have been validated in recent years, though suboptimal standardisation has been highlighted in different publications.

  10. Overview of the Defense Programs Research and Technology Development Program for fiscal year 1993. Appendix II research laboratories and facilities

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-30

    This document contains summaries of the research facilities that support the Defense Programs Research and Technology Development Program for FY 1993. The nine program elements are aggregated into three program clusters as follows: (1) Advanced materials sciences and technologies; chemistry and materials, explosives, special nuclear materials (SNM), and tritium. (2) Design sciences and advanced computation; physics, conceptual design and assessment, and computation and modeling. (3) Advanced manufacturing technologies and capabilities; system engineering science and technology, and electronics, photonics, sensors, and mechanical components. Section I gives a brief summary of 23 major defense program (DP) research and technology facilities and shows how these major facilities are organized by program elements. Section II gives a more detailed breakdown of the over 200 research and technology facilities being used at the Laboratories to support the Defense Programs mission.

  11. Low-rank coal study: national needs for resource development. Volume 3. Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    Technologies applicable to the development and use of low-rank coals are analyzed in order to identify specific needs for research, development, and demonstration (RD and D). Major sections of the report address the following technologies: extraction; transportation; preparation, handling and storage; conventional combustion and environmental control technology; gasification; liquefaction; and pyrolysis. Each of these sections contains an introduction and summary of the key issues with regard to subbituminous coal and lignite; description of all relevant technology, both existing and under development; a description of related environmental control technology; an evaluation of the effects of low-rank coal properties on the technology; and summaries of current commercial status of the technology and/or current RD and D projects relevant to low-rank coals.

  12. Social Studies: Application Units. Course II, Teachers. Computer-Oriented Curriculum. REACT (Relevant Educational Applications of Computer Technology).

    Science.gov (United States)

    Tecnica Education Corp., San Carlos, CA.

    This book is one of a series in Course II of the Relevant Educational Applications of Computer Technology (REACT) Project. It is designed to point out to teachers two of the major applications of computers in the social sciences: simulation and data analysis. The first section contains a variety of simulation units organized under the following…

  13. Volume II: Compendium Abstracts

    Science.gov (United States)

    2008-08-01

    canards, and by measuring the reflected laser light’s location, one can use trigonometry to find the angle that the canard is at and calibrate it... obstacles to process integration are discussed. The author wishes to acknowledge the mentorship of Eugene Zakar. 32 A Projectile/Target Interaction...survivability, and sustainability. Using laser detection and ranging (LADAR) for robot navigation and obstacle avoidance is an active area of

  14. Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4. Volume 1: Technology evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    During World War 11, the Oak Ridge Y-12 Plant was built as part of the Manhattan Project to supply enriched uranium for weapons production. In 1945, Building 9201-4 (Alpha-4) was originally used to house a uranium isotope separation process based on electromagnetic separation technology. With the startup of the Oak Ridge K-25 Site gaseous diffusion plant In 1947, Alpha-4 was placed on standby. In 1953, the uranium enrichment process was removed, and installation of equipment for the Colex process began. The Colex process--which uses a mercury solvent and lithium hydroxide as the lithium feed material-was shut down in 1962 and drained of process materials. Residual Quantities of mercury and lithium hydroxide have remained in the process equipment. Alpha-4 contains more than one-half million ft{sup 2} of floor area; 15,000 tons of process and electrical equipment; and 23,000 tons of insulation, mortar, brick, flooring, handrails, ducts, utilities, burnables, and sludge. Because much of this equipment and construction material is contaminated with elemental mercury, cleanup is necessary. The goal of the Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 is to provide a planning document that relates decontamination and decommissioning and waste management problems at the Alpha-4 building to the technologies that can be used to remediate these problems. The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 builds on the methodology transferred by the U.S. Air Force to the Environmental Management organization with DOE and draws from previous technology logic diagram-efforts: logic diagrams for Hanford, the K-25 Site, and ORNL.

  15. Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 2

    Science.gov (United States)

    Greenburg, J. S.; Kaplan, M.; Fishman, J.; Hopkins, C.

    1985-01-01

    The computational procedures used in the evaluation of spacecraft technology programs that impact upon commercial communication satellite operations are discussed. Computer programs and data bases are described.

  16. Pipe inspection using the BTX-II. Innovative technology summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

  17. Variation in the measurement of cranial volume and surface area using 3D laser scanning technology.

    Science.gov (United States)

    Sholts, Sabrina B; Wärmländer, Sebastian K T S; Flores, Louise M; Miller, Kevin W P; Walker, Phillip L

    2010-07-01

    Three-dimensional (3D) laser scanner models of human crania can be used for forensic facial reconstruction, and for obtaining craniometric data useful for estimating age, sex, and population affinity of unidentified human remains. However, the use of computer-generated measurements in a casework setting requires the measurement precision to be known. Here, we assess the repeatability and precision of cranial volume and surface area measurements using 3D laser scanner models created by different operators using different protocols for collecting and processing data. We report intraobserver measurement errors of 0.2% and interobserver errors of 2% of the total area and volume values, suggesting that observer-related errors do not pose major obstacles for sharing, combining, or comparing such measurements. Nevertheless, as no standardized procedure exists for area or volume measurements from 3D models, it is imperative to report the scanning and postscanning protocols employed when such measurements are conducted in a forensic setting.

  18. Technology of high-level nuclear waste disposal. Advances in the science and engineering of the management of high-level nuclear wastes. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, P.L.; Breslin, J.J. (eds.)

    1981-01-01

    The papers in this volume cover the following subjects: waste isolation and the natural geohydrologic system; repository perturbations of the natural system; radionuclide migration through the natural system; and repository design technology. Individual papers are abstracted.

  19. Cryogenic Fluid Management Technology Workshop. Volume 1: Presentation material and discussion

    Science.gov (United States)

    Aydelott, John C. (Editor); Devol, William (Editor)

    1987-01-01

    The major objective of the workshop was to identify future NASA needs for technology that will allow the management of subcritical cryogenic fluids in the low gravity space environment. Workshop participants were asked to identify those technologies which will require in-space experimentation and are thus candidates for inclusion in the flight experiment being defined at the Lewis Research Center.

  20. Focus on Technology's Impact on Postsecondary Education. Network News. Volume 23, Number 1

    Science.gov (United States)

    L'Orange, Hans P., Ed.

    2004-01-01

    "Network News" provides an overview of technology's impact on postsecondary education. Particular attention is paid to recent studies looking at distance education and access. This issue contains the following articles: (1) New NCES Report: Distance Education at Degree-Granting Postsecondary Institutions 2000-2001; (2) How Does Technology Affect…

  1. Mixed and low-level waste treatment facility project. Volume 3, Waste treatment technologies (Draft)

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    The technology information provided in this report is only the first step toward the identification and selection of process systems that may be recommended for a proposed mixed and low-level waste treatment facility. More specific information on each technology will be required to conduct the system and equipment tradeoff studies that will follow these preengineering studies. For example, capacity, maintainability, reliability, cost, applicability to specific waste streams, and technology availability must be further defined. This report does not currently contain all needed information; however, all major technologies considered to be potentially applicable to the treatment of mixed and low-level waste are identified and described herein. Future reports will seek to improve the depth of information on technologies.

  2. Rigorous Screening Technology for Identifying Suitable CO2 Storage Sites II

    Energy Technology Data Exchange (ETDEWEB)

    George J. Koperna Jr.; Vello A. Kuuskraa; David E. Riestenberg; Aiysha Sultana; Tyler Van Leeuwen

    2009-06-01

    This report serves as the final technical report and users manual for the 'Rigorous Screening Technology for Identifying Suitable CO2 Storage Sites II SBIR project. Advanced Resources International has developed a screening tool by which users can technically screen, assess the storage capacity and quantify the costs of CO2 storage in four types of CO2 storage reservoirs. These include CO2-enhanced oil recovery reservoirs, depleted oil and gas fields (non-enhanced oil recovery candidates), deep coal seems that are amenable to CO2-enhanced methane recovery, and saline reservoirs. The screening function assessed whether the reservoir could likely serve as a safe, long-term CO2 storage reservoir. The storage capacity assessment uses rigorous reservoir simulation models to determine the timing, ultimate storage capacity, and potential for enhanced hydrocarbon recovery. Finally, the economic assessment function determines both the field-level and pipeline (transportation) costs for CO2 sequestration in a given reservoir. The screening tool has been peer reviewed at an Electrical Power Research Institute (EPRI) technical meeting in March 2009. A number of useful observations and recommendations emerged from the Workshop on the costs of CO2 transport and storage that could be readily incorporated into a commercial version of the Screening Tool in a Phase III SBIR.

  3. Treatment of emphysema using bronchoscopic lung volume reduction coil technology : an update on efficacy and safety

    NARCIS (Netherlands)

    Hartman, Jorine E.; Klooster, Karin; ten Hacken, Nick H. T.; Slebos, Dirk-Jan

    2015-01-01

    In the last decade several promising bronchoscopic lung volume reduction (BLVR) treatments were developed and investigated. One of these treatments is BLVR treatment with coils. The advantage of this specific treatment is that it works independently of collateral flow, and also shows promise for pat

  4. 28. annual offshore technology conference: Proceedings. Volume 3: Construction and installation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The 32 papers in this volume cover the following topics: Gulf of Mexico developments -- Popeye and SeaStar; Materials, utilization and fabrication; Mooring and station keeping; Offshore pipelines; and Platform installation. Most papers have been processed separately for inclusion on the data base.

  5. Seismic design technology for breeder reactor structures. Volume 4. Special topics in piping and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into five chapters: experimental verification of piping systems, analytical verification of piping restraint systems, seismic analysis techniques for piping systems with multisupport input, development of floor spectra from input response spectra, and seismic analysis procedures for in-core components. (DLC)

  6. Seismic design technology for breeder reactor structures. Volume 4. Special topics in piping and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into five chapters: experimental verification of piping systems, analytical verification of piping restraint systems, seismic analysis techniques for piping systems with multisupport input, development of floor spectra from input response spectra, and seismic analysis procedures for in-core components. (DLC)

  7. Characterization of alternative electric generation technologies for the SPS comparative assessment: volume 2, central-station technologies

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The SPS Concept Development and Evaluation Program includes a comparative assessment. An early first step in the assessment process is the selection and characterization of alternative technologies. This document describes the cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives: (1) conventional coal-fired powerplant; (2) conventional light water reactor (LWR); (3) combined cycle powerplant with low-Btu gasifiers; (4) liquid metal fast breeder reactor (LMFBR); (5) photovoltaic system without storage; and (6) fusion reactor.

  8. Analytical challenges of determining composition and structure in small volumes with applications to semiconductor technology, nanostructures and solid state science

    Science.gov (United States)

    Ma, Zhiyong; Kuhn, Markus; Johnson, David C.

    2017-03-01

    Determining the structure and composition of small volumes is vital to the ability to understand and control nanoscale properties and critical for advancing both fundamental science and applications, such as semiconductor device manufacturing. While metrology of nanoscale materials (nanoparticles, nanocomposites) and nanoscale semiconductor structures is challenging, both basic research and cutting edge technology benefit from new and enhanced analytical techniques. This focus issue contains articles describing approaches to overcome the challenges in obtaining statistically significant atomic-scale quantification of structure and composition in a variety of materials and devices using electron microscopy and atom probe tomography.

  9. Bibliography on Cold Regions Science and Technology. Volume 41. Part 1

    Science.gov (United States)

    1987-12-01

    variety of nonelec- trolytes. Gibbs energy of interaction of the ester group with other functional groups. Suri, S.K., et al. Journal of solution...SIBEX- Fase II, Chile, en el eslrecho Bransfield. 1985], Schlauer, R.P., Santiago de Chile. Instituto Antär- tico Chileno. Serie ciendfica, 1986

  10. Applied research on energy storage and conversion for photovoltaic and wind energy systems. Volume II. Photovoltaic systems with energy storage. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    This volume of the General Electric study was directed at an evaluation of those energy storage technologies deemed best suited for use in conjunction with a photovoltaic energy conversion system in utility, residential and intermediate applications. Break-even cost goals are developed for several storage technologies in each application. These break-even costs are then compared with cost projections presented in Volume I of this report to show technologies and time frames of potential economic viability. The form of the presentation allows the reader to use more accurate storage system cost data as they become available. The report summarizes the investigations performed and presents the results, conclusions and recommendations pertaining to use of energy storage with photovoltaic energy conversion systems. Candidate storage concepts studied include (1) above ground and underground pumped hydro, (2) underground compressed air, (3) electric batteries, (4) flywheels, and (5) hydrogen production and storage. (WHK)

  11. Emerging Technologies Program Integration Report. Volume 2. Background, Delphi and Workshop Data. Appendices

    Science.gov (United States)

    1987-05-04

    models for specific a;plication domains. --Need experience with specific applications that will push the hardware/ .’ software/conceptual resources...militaryf impact of this technology: A. How might the tecnology in question change US military capabilities? Diminish days lost due to common viral...capability. To achieve necessary goals will require pushing of 7m1 wave tube, solid state device and antenna technologies. Oirk R. Klose . REPORTER: AV 995

  12. Technology assessment of future intercity passenger transportation systems. Volume 6: Impact assessment

    Science.gov (United States)

    1976-01-01

    Consequences that might occur if certain technological developments take place in intercity transportation are described. These consequences are broad ranging, and include economic, environmental, social, institutional, energy-related, and transportation service implications. The possible consequences are traced through direct (primary) impacts to indirect (secondary, tertiary, etc.) impacts. Chains of consequences are traced, reaching as far beyond the original transportation cause as is necessary to identify all impacts felt to be influenced significantly by the technological development considered.

  13. Thermodynamics of electron transfer in oxygenic photosynthetic reaction centers: volume change, enthalpy, and entropy of electron-transfer reactions in manganese-depleted photosystem II core complexes.

    Science.gov (United States)

    Hou, J M; Boichenko, V A; Diner, B A; Mauzerall, D

    2001-06-19

    We have previously reported the thermodynamic data of electron transfer in photosystem I using pulsed time-resolved photoacoustics [Hou et al. (2001) Biochemistry 40, 7109-7116]. In the present work, using preparations of purified manganese-depleted photosystem II (PS II) core complexes from Synechocystis sp. PCC 6803, we have measured the DeltaV, DeltaH, and estimated TDeltaS of electron transfer on the time scale of 1 micros. At pH 6.0, the volume contraction of PS II was determined to be -9 +/- 1 A3. The thermal efficiency was found to be 52 +/- 5%, which corresponds to an enthalpy change of -0.9 +/- 0.1 eV for the formation of the state P680+Q(A-) from P680*. An unexpected volume expansion on pulse saturation of PS II was observed, which is reversible in the dark. At pH 9.0, the volume contraction, the thermal efficiency, and the enthalpy change were -3.4 +/- 0.5 A3, 37 +/- 7%, and -1.15 +/- 0.13 eV, respectively. The DeltaV of PS II, smaller than that of PS I and bacterial centers, is assigned to electrostriction and analyzed using the Drude-Nernst equation. To explain the small DeltaV for the formation of P680+Q(A-) or Y(Z*)Q(A-), we propose that fast proton transfer into a polar region is involved in this reaction. Taking the free energy of charge separation of PS II as the difference between the energy of the excited-state P680* and the difference in the redox potentials of the donor and acceptor, the apparent entropy change (TDeltaS) for charge separation of PS II is calculated to be negative, -0.1 +/- 0.1 eV at pH 6.0 (P680+Q(A-)) and -0.2 +/- 0.15 eV at pH 9.0 (Y(Z*)Q(A-)). The thermodynamic properties of electron transfer in PS II core reaction centers thus differ considerably from those of bacterial and PS I reaction centers, which have DeltaV of approximately -27 A3, DeltaH of approximately -0.4 eV, and TDeltaS of approximately +0.4 eV.

  14. High-volume extraction of nucleic acids by magnetic bead technology for ultrasensitive detection of bacteria in blood components.

    Science.gov (United States)

    Störmer, Melanie; Kleesiek, Knut; Dreier, Jens

    2007-01-01

    Nucleic acid isolation, the most technically demanding and laborious procedure performed in molecular diagnostics, harbors the potential for improvements in automation. A recent development is the use of magnetic beads covered with nucleic acid-binding matrices. We adapted this technology with a broad-range 23S rRNA real-time reverse transcription (RT)-PCR assay for fast and sensitive detection of bacterial contamination of blood products. We investigated different protocols for an automated high-volume extraction method based on magnetic-separation technology for the extraction of bacterial nucleic acids from platelet concentrates (PCs). We added 2 model bacteria, Staphylococcus epidermidis and Escherichia coli, to a single pool of apheresis-derived, single-donor platelets and assayed the PCs by real-time RT-PCR analysis with an improved primer-probe system and locked nucleic acid technology. Co-amplification of human beta(2)-microglobulin mRNA served as an internal control (IC). We used probit analysis to calculate the minimum concentration of bacteria that would be detected with 95% confidence. For automated magnetic bead-based extraction technology with the real-time RT-PCR, the 95% detection limit was 29 x 10(3) colony-forming units (CFU)/L for S. epidermidis and 22 x 10(3) CFU/L for E. coli. No false-positive results occurred, either due to nucleic acid contamination of reagents or externally during testing of 1030 PCs. High-volume nucleic acid extraction improved the detection limit of the assay. The improvement of the primer-probe system and the integration of an IC make the RT-PCR assay appropriate for bacteria screening of platelets.

  15. Building Technology Forecast and Evaluation (BTFE). Volume 2. Evaluation of Two Structural Systems

    Science.gov (United States)

    1990-11-01

    are all one piece of formwork , erected and stripped as a single unit. Use of half or full tunnels depends on the room width, form weight, and crane...expected to be good. 1.3 Formwork / Tunnel lorms are metal sheets and are E Temporary designed adequately; scaffolding is Supports used as required. 1.4...structural systems with potential advantage to the U.S. Army Corps of Engineers (USACE): tunnel forming systems and composite panellzed systems. Volume 11

  16. Digital Systems Validation Handbook. Volume 2. Chapter 18. Avionic Data Bus Integration Technology

    Science.gov (United States)

    1993-11-01

    U.S. Department of Transportation PFe 1rs Aviation Administration DOT/FAA/CT-88/10 HANDBOOK- VOLUME H DIGITAL SYSTEMS VALIDATION - CHAPTER 18 tw...18-29 improve identification, control, and auditing of software. SCM and SQA methods in RTCA/DO-178A are drawn directly from proven methods of hardware...procedures, and practices; reviews and audits ; configuration management; medium control; testing; supplier control; and appropriate records. A brief

  17. Advances on Propulsion Technology for High-Speed Aircraft. Volume 2

    Science.gov (United States)

    2007-03-01

    drag, or cruise. As the prime contractor for NASA, ATK GASL had the unique perspective of seeing the complete program from start to finish. Although... prime contractor to NASA for the execution of the program and had overall responsibility for the detailed design and manufacture and support to flight...Digest, Volume 26, Number 4 (2005) [9] 9 Tyll, J., Erdos , J., Bakos, R., Low-Cost Free-Flight Testing of Hypersonic Airbreathing I Engines, ISOABE 2001

  18. Proposed Tenaska Washington II Generation Project : Final Environmental Impact Statement. Volume 1: Environmental Analysis and Technical Appendices.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1994-01-01

    BPA is considering whether to purchase electrical power from a proposed privately-owned combustion-turbine electrical generation plant in Washington. The plant would be fired by natural gas and would use combined-cycle technology to generate 240 average megawatts (aMW) of energy. The plant would be developed, owned, and operated by Tenaska Washington Partners II, L.P. The project would be located about 19 kilometers (12 miles) southeast of downtown Tacoma in the Frederickson Industrial Area, Pierce County. The proposed plant would occupy about half of a 6.4-hectare (16-acre) parcel and would be consistent with the industrial character of its surroundings. The proposed site is currently undeveloped and zoned for industrial use by the county. Main environmental concerns identified in the scoping process and in comments on the Draft Environmental Impact Statement (EIS) include: (1) potential air quality impacts, such as emissions and their contribution to the {open_quotes}greenhouse{close_quotes} effect; (2) potential health and safety impacts, such as nuisance odors, plant safety, visibility and heat-emission systems which may affect low-flying planes and potential health effects of electric and magnetic fields; and (3) potential water quality and quantity impacts, such as the amount of wastewater to be discharged, the source and amount of water required for plant operation. These and other issues are discussed in detail in the EIS. The proposed project already includes many features designed to reduce environmental impacts. Based on investigations performed for the EIS, no significant unavoidable adverse environmental impacts associated with the proposed project were identified, and no evidence emerged to suggest that the proposed action is controversial. The EIS is being mailed to numerous agencies, groups, and individuals (see Section 8.0). There will be a 30-day no-action period before any decisions are made and the Record of Decision is signed.

  19. Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 1

    Science.gov (United States)

    Greenburg, J. S.; Gaelick, C.; Kaplan, M.; Fishman, J.; Hopkins, C.

    1985-01-01

    Commercial organizations as well as government agencies invest in spacecraft (S/C) technology programs that are aimed at increasing the performance of communications satellites. The value of these programs must be measured in terms of their impacts on the financial performane of the business ventures that may ultimately utilize the communications satellites. An economic evaluation and planning capability was developed and used to assess the impact of NASA on-orbit propulsion and space power programs on typical fixed satellite service (FSS) and direct broadcast service (DBS) communications satellite business ventures. Typical FSS and DBS spin and three-axis stabilized spacecraft were configured in the absence of NASA technology programs. These spacecraft were reconfigured taking into account the anticipated results of NASA specified on-orbit propulsion and space power programs. In general, the NASA technology programs resulted in spacecraft with increased capability. The developed methodology for assessing the value of spacecraft technology programs in terms of their impact on the financial performance of communication satellite business ventures is described. Results of the assessment of NASA specified on-orbit propulsion and space power technology programs are presented for typical FSS and DBS business ventures.

  20. Study of power management technology for orbital multi-100KWe applications. Volume 3: Requirements

    Science.gov (United States)

    Mildice, J. W.

    1980-01-01

    Mid to late 1980's power management technology needs to support development of a general purpose space platform, capable of suplying 100 to 250 KWe to a variety of users in low Earth orbit are examined. A typical, shuttle assembled and supplied space platform is illustred, along with a group of payloads which might reasonably be expected to use such a facility. Examination of platform and user power needs yields a set of power requirements used to evaluate power management options for life cycle cost effectivness. The most cost effective ac/dc and dc systems are evaluated, specifically to develop system details which lead to technology goals, including: array and transmission voltages, best frequency for ac power transmission, and advantages and disadvantages of ac and dc systems for this application. System and component requirements are compared with the state-of-the-art to identify areas where technological development is required.

  1. Advanced Processing Technology semiannual report, March--December 1991. Volume 1, Number 1

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, M.; Kline-Simon, K. [eds.

    1991-12-31

    This first issue of the APT Semiannual Report focuses on APT`s defense-related technologies. These technologies are a continuation of the research, development, and engineering work performed by LLNLs Special Isotope Separation (SIS) Program. SIS was the first large-scale DOE venture that had environmentally conscious manufacturing processes and facilities as its deliverables. The objectives were to create a facility where the only outputs were either usable products or disposable wastes, and to comply with existing and anticipated federal, state, and local regulations related to safeguards, security, health and safety. To meet these objectives, revolutionary changes were needed in plutonium processing operations, chemistry, and equipment. New processes had to be developed that enhanced worker safety, minimized operator radiation dose, minimized waste at the point of generation, and provided for built-in recycling of residues. The SIS Program developed and demonstrated the technology (both chemistry and physics) necessary to provide plutonium with individual isotopic tailoring. This process made it possible to transform fuel-grade plutonium into weapon-grade material. However, due to the changing world political climate, the country`s need for plutonium to make new weapons has decreased dramatically. As a result, the planned SIS plutonium-separation plant will not be built. After the SIS Program was canceled in 199 1, Congress directed that the plutonium processing technologies under development for the SIS Program be redirected to the weapons program. APT took over the development of the innovative SIS technologies and is applying them to the development of a new, reconfigured Nuclear Weapons Complex -- Complex 21. ``Close Out of the SIS Program`` describes the completion of the SIS research and development work, and the transfer of key technologies to support this reconfiguration effort.

  2. Advanced Processing Technology semiannual report, March--December 1991. Volume 1, Number 1

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, M.; Kline-Simon, K. [eds.

    1991-12-31

    This first issue of the APT Semiannual Report focuses on APT`s defense-related technologies. These technologies are a continuation of the research, development, and engineering work performed by LLNLs Special Isotope Separation (SIS) Program. SIS was the first large-scale DOE venture that had environmentally conscious manufacturing processes and facilities as its deliverables. The objectives were to create a facility where the only outputs were either usable products or disposable wastes, and to comply with existing and anticipated federal, state, and local regulations related to safeguards, security, health and safety. To meet these objectives, revolutionary changes were needed in plutonium processing operations, chemistry, and equipment. New processes had to be developed that enhanced worker safety, minimized operator radiation dose, minimized waste at the point of generation, and provided for built-in recycling of residues. The SIS Program developed and demonstrated the technology (both chemistry and physics) necessary to provide plutonium with individual isotopic tailoring. This process made it possible to transform fuel-grade plutonium into weapon-grade material. However, due to the changing world political climate, the country`s need for plutonium to make new weapons has decreased dramatically. As a result, the planned SIS plutonium-separation plant will not be built. After the SIS Program was canceled in 199 1, Congress directed that the plutonium processing technologies under development for the SIS Program be redirected to the weapons program. APT took over the development of the innovative SIS technologies and is applying them to the development of a new, reconfigured Nuclear Weapons Complex -- Complex 21. ``Close Out of the SIS Program`` describes the completion of the SIS research and development work, and the transfer of key technologies to support this reconfiguration effort.

  3. Shuttle Ground Operations Efficiencies/Technologies Study (SGOE/T). Volume 5: Technical Information Sheets (TIS)

    Science.gov (United States)

    Scholz, A. L.; Hart, M. T.; Lowry, D. J.

    1987-01-01

    The Technology Information Sheet was assembled in database format during Phase I. This document was designed to provide a repository for information pertaining to 144 Operations and Maintenance Instructions (OMI) controlled operations in the Orbiter Processing Facility (OPF), Vehicle Assembly Building (VAB), and PAD. It provides a way to accumulate information about required crew sizes, operations task time duration (serial and/or parallel), special Ground Support Equipment (GSE). required, and identification of a potential application of existing technology or the need for the development of a new technolgoy item.

  4. Fiscal years 1994--1998 Information Technology Strategic Plan. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    A team of senior managers from across the US Nuclear Regulatory Commission (NRC), working with the Office of Information Resources Management (IRM), has completed an NRC Strategic Information Technology (IT) Plan. The Plan addresses three major areas: (1) IT Program Management, (2) IT Infrastructure, and (3) Information and Applications Management. Key recommendations call for accelerating the replacement of Agency workstations, implementing a new document management system, applying business process reengineering to selected Agency work processes, and establishing an Information Technology Council to advise the Director of IRM.

  5. Preventing Cancer in the Workplace and Community. Volume II. Cancer, the Worker and the Community. An Independent Study Guide.

    Science.gov (United States)

    Li, Virginia C., Ed.; And Others

    This second volume of a two-volume set on prevention of cancer in the workplace is a self-instructional manual designed for independent study by students who consult on a regular basis with an instructor. The manual follows a consistent format. The narrative text in each of three sections presents current knowledge about the subject and refers to…

  6. Contemporary American Success Stories. Famous People of Asian Ancestry. Volume II. A Mitchell Lane Multicultural Biography Series.

    Science.gov (United States)

    Marvis, Barbara J.

    As part of a five-volume series this volume presents biographical sketches of persons of Asian American heritage who have made contributions to American life. Asian Americans have often been subjected to racial and ethnic prejudice as have other easily identifiable groups of Americans. The series, written at a reading level of grades 5 to 6, but…

  7. Feasibility Study for the Establishment of a Pharmacy Technology Program. Volume 11, Number 8.

    Science.gov (United States)

    Bourke, Patricia G.; And Others

    In December 1980, a study was conducted by William Rainey Harper College (WRHC) to determine the feasibility of establishing a pharmacy technology program. Professional Life Science and Human Services staff members telephoned 13 hospital pharmacies and four retail pharmacies in WRHC's service area. It was felt that if the 15 responding pharmacies…

  8. Handbook of Research on Technology Tools for Real-World Skill Development (2 Volumes)

    Science.gov (United States)

    Rosen, Yigel, Ed.; Ferrara, Steve, Ed.; Mosharraf, Maryam, Ed.

    2016-01-01

    Education is expanding to include a stronger focus on the practical application of classroom lessons in an effort to prepare the next generation of scholars for a changing world economy centered on collaborative and problem-solving skills for the digital age. "The Handbook of Research on Technology Tools for Real-World Skill Development"…

  9. Sandia technology. Volume 13, number 2 Special issue : verification of arms control treaties.

    Energy Technology Data Exchange (ETDEWEB)

    1989-03-01

    Nuclear deterrence, a cornerstone of US national security policy, has helped prevent global conflict for over 40 years. The DOE and DoD share responsibility for this vital part of national security. The US will continue to rely on nuclear deterrence for the foreseeable future. In the late 1950s, Sandia developed satellite-borne nuclear burst detection systems to support the treaty banning atmospheric nuclear tests. This activity has continued to expand and diversify. When the Non-Proliferation Treaty was ratified in 1970, we began to develop technologies to protect nuclear materials from falling into unauthorized hands. This program grew and now includes systems for monitoring the movement and storage of nuclear materials, detecting tampering, and transmiting sensitive data securely. In the late 1970s, negotiations to further limit underground nuclear testing were being actively pursued. In less than 18 months, we fielded the National Seismic Station, an unattended observatory for in-country monitoring of nuclear tests. In the mid-l980s, arms-control interest shifted to facility monitoring and on-site inspection. Our Technical On-site Inspection Facility is the national test bed for perimeter and portal monitoring technology and the prototype for the inspection portal that was recently installed in the USSR under the Intermediate-Range Nuclear Forces accord. The articles in the special issue of Sundiu Technology describe some of our current contributions to verification technology. This work supports the US policy to seek realistic arms control agreements while maintaining our national security.

  10. Global Journal of Computer Science and Technology. Volume 1.2

    Science.gov (United States)

    Dixit, R. K.

    2009-01-01

    Articles in this issue of "Global Journal of Computer Science and Technology" include: (1) Input Data Processing Techniques in Intrusion Detection Systems--Short Review (Suhair H. Amer and John A. Hamilton, Jr.); (2) Semantic Annotation of Stock Photography for CBIR Using MPEG-7 standards (R. Balasubramani and V. Kannan); (3) An Experimental Study…

  11. Handbook of Research on Technology Tools for Real-World Skill Development (2 Volumes)

    Science.gov (United States)

    Rosen, Yigel, Ed.; Ferrara, Steve, Ed.; Mosharraf, Maryam, Ed.

    2016-01-01

    Education is expanding to include a stronger focus on the practical application of classroom lessons in an effort to prepare the next generation of scholars for a changing world economy centered on collaborative and problem-solving skills for the digital age. "The Handbook of Research on Technology Tools for Real-World Skill Development"…

  12. SWOT Analysis of King Abdullah II School for Information Technology at University of Jordan According to Quality Assurance Procedures

    Directory of Open Access Journals (Sweden)

    Lubna Naser Eddeen

    2013-02-01

    Full Text Available Many books and research papers have defined and referred to the term SWOT Analysis. SWOT Analysis can be defines as "strategic planning method used to evaluate the Strengths, Weaknesses, Opportunities, and Threats involved in a project or in a business venture". It's used to assess internal and external environmental factors which affect on the business. This paper analyze the main SWOT factors at King Abdullah II School for Information Technology.

  13. Massachusetts Institute of Technology Lincoln Laboratory Journal Volume 6, Number 1, Spring 1993

    Science.gov (United States)

    1993-01-01

    F- I N uke11IL A " CINe dire’It Jr k’k h~ Inek’ I M Il liý’ Inhi J kiier 1k &I k i. 1 piiwliii l [Im ik]Af ff t t I,\\ di ’ I I II aie a I 1,4111L ev...Rc vugnmoa ul ( lri,al I/nA / ilotetu in L."er Rada’ Imagen ’, Sensor imagery where the cab or trailer is expected constitutes strong evidence that a

  14. Atrial natriuretic peptide (ANP) as a neuropeptide: Interaction with angiotensin II on volume control and renal sodium handling

    OpenAIRE

    Unger, Th.; Badoer, E.; Gareis, C.; Girchev, R.; Kotrba, M.; Qadri, F; Rettig, R.; Rohmeiss, P

    1990-01-01

    1 Angiotensin II (ANG II) and atrial natriuretic peptide (ANP) are functionally antagonistic circulating hormones involved in blood pressure and body fluid regulation. An inappropriate atrial secretion of ANP has been implicated in the pathogenesis of hypertension, but clinical and experimental results on the role of ANP in hypertension are still conflicting.

  15. Halo Gas and Galaxy Disk Kinematics of a Volume-Limited Sample of MgII Absorption-Selected Galaxies at z~0.1

    CERN Document Server

    Kacprzak, G G; Barton, E J; Cooke, J

    2011-01-01

    We have directly compared MgII halo gas kinematics to the rotation velocities derived from emission/absorption lines of the associated host galaxies. Our 0.096volume-limited sample comprises 13 ~L* galaxies, with impact parameters of 12-90 kpc from background quasars sight-lines, associated with 11 MgII absorption systems with MgII equivalent widths 0.3< W_r(2796)<2.3A. For only 5/13 galaxies, the absorption resides to one side of the galaxy systemic velocity and trends to align with one side of the galaxy rotation curve. The remainder have absorption that spans both sides of the galaxy systemic velocity. These results differ from those at z~0.5, where 74% of the galaxies have absorption residing to one side of the galaxy systemic velocity. For all the z~0.1 systems, simple extended disk-like rotation models fail to reproduce the full MgII velocity spread, implying other dynamical processes contribute to the MgII kinematics. In fact 55% of the galaxies are "counter-rotating" with respect ...

  16. Western oil shale development: a technology assessment. Volume 1. Main report

    Energy Technology Data Exchange (ETDEWEB)

    1981-11-01

    The general goal of this study is to present the prospects of shale oil within the context of (1) environmental constraints, (2) available natural and economic resources, and (3) the characteristics of existing and emerging technology. The objectives are: to review shale oil technologies objectively as a means of supplying domestically produced fuels within environmental, social, economic, and legal/institutional constraints; using available data, analyses, and experienced judgment, to examine the major points of uncertainty regarding potential impacts of oil shale development; to resolve issues where data and analyses are compelling or where conclusions can be reached on judgmental grounds; to specify issues which cannot be resolved on the bases of the data, analyses, and experienced judgment currently available; and when appropriate and feasible, to suggest ways for the removal of existing uncertainties that stand in the way of resolving outstanding issues.

  17. Municipal Solid Waste (MSW) to Liquid Fuels Synthesis, Volume 1: Availability of Feedstock and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Valkenburt, Corinne; Walton, Christie W.; Thompson, Becky L.; Gerber, Mark A.; Jones, Susanne B.; Stevens, Don J.

    2008-12-01

    This report investigated the potential of using municipal solid waste (MSW) to make synthesis gas (syngas) suitable for production of liquid fuels. Issues examined include: • MSW physical and chemical properties affecting its suitability as a gasifier feedstock and for liquid fuels synthesis • expected process scale required for favorable economics • the availability of MSW in quantities sufficient to meet process scale requirements • the state-of-the-art of MSW gasification technology.

  18. Economic Feasibility and Market Readiness of Solar Technologies. Draft Final Report. Volume I.

    Energy Technology Data Exchange (ETDEWEB)

    Flaim, Silvio J.; Buchanan, Deborah L.; Christmas, Susan; Fellhauer, Cheryl; Glenn, Barbara; Ketels, Peter A.; Levary, Arnon; Mourning, Pete; Steggerda, Paul; Trivedi, Harit; Witholder, Robert E.

    1978-09-01

    Systems descriptions, costs, technical and market readiness assessments are reported for ten solar technologies: solar heating and cooling of buildings (SHACOB), passive, agricultural and industrial process heat (A/IPH), biomass, ocean thermal (OTEC), wind (WECS), solar thermal electric, photovoltaics, satellite power station (SPS), and solar total energy systems (STES). Study objectives, scope, and methods. are presented. of Joint Task The cost and market analyses portion 5213/6103 will be used to make commercialization assessments in the conclusions of. the final report.

  19. ICAM (Integrated Computer-Aided Manufacturing) Manufacturing Cost/Design Guide. Volume 7. Technology Transfer Summary.

    Science.gov (United States)

    1984-09-01

    advanced composite structures for production. Conduct material and manufacturing trade-off studies on ATF advanced design, NASA composite wing, and...255-7371. D-17 .* . . . . . . .. . .. .. . . . . . - . , o , . . - .’. TTD4502 60000 12 Sept 1984 CC tE % > LL 00 o0h K; Cr A .’ TTD450260000 12... coatings on the internal "Top-of-the-Line" Manu- observing the effect of the surfaces of hollowf~acturing Technology Success proposed change. Potential

  20. Engineering Technology Reports, Volume 1: Laboratory Directed Research and Development FY00

    Energy Technology Data Exchange (ETDEWEB)

    Baron, A L; Langland, R T; Minichino, C

    2001-10-03

    In FY-2000, Engineering at Lawrence Livermore National Laboratory faced significant pressures to meet critical project milestones, and immediate demands to facilitate the reassignment of employees as the National Ignition Facility (the 600-TW laser facility being designed and built at Livermore, and one of the largest R&D construction projects in the world) was in the process of re-baselining its plan while executing full-speed its technology development efforts. This drive for change occurred as an unprecedented level of management and program changes were occurring within LLNL. I am pleased to report that we met many key milestones and achieved numerous technological breakthroughs. This report summarizes our efforts to perform feasibility and reduce-to-practice studies, demonstrations, and/or techniques--as structured through our technology centers. Whether using computational engineering to predict how giant structures like suspension bridges will respond to massive earthquakes or devising a suitcase-sized microtool to detect chemical and biological agents used by terrorists, we have made solid technical progress. Five Centers focus and guide longer-term investments within Engineering, as well as impact all of LLNL. Each Center is responsible for the vitality and growth of the core technologies it represents. My goal is that each Center will be recognized on an international scale for solving compelling national problems requiring breakthrough innovation. The Centers and their leaders are as follows: Center for Complex Distributed Systems--David B. McCallen; Center for Computational Engineering--Kyran D. Mish; Center for Microtechnology--Raymond P. Mariella, Jr.; Center for Nondestructive Characterization--Harry E. Martz, Jr.; and Center for Precision Engineering--Keith Carlisle.

  1. 2005 5th Annual CMMI Technology Conference and User Group. Volume 3 - Wednesday

    Science.gov (United States)

    2005-11-17

    formerly Sperry Flight Systems) and 2 years with Tracor Aerospace, developed or managed the development of embedded software for avionics systems...estimating, tracking, forecasting, and benchmarking. Mr. Ross, during 17 years with Honeywell Air Transport Systems (formerly Sperry Flight Systems...Implementing CMMI in a Services Environment Thomas E. Zience and Roger W. Lee BAE Systems Information Technology All Rights Reserved by BAE Systems Information

  2. WSTIAC: Weapon Systems Technology Information Analysis Center. Volume 6, Number 1

    Science.gov (United States)

    2005-01-01

    Computational Neuroscience Program 2004. Associate Editor; Journal of Counter Ordinance Technology. Joel L EDavis, Program Manager, Cognitive and Neural...tests were against unitary (nonseparating) targets representative of the Journal of the Optical Society of America A, involves of SCUD-type ballistic...Agent ( CSEA ) and prime contractor for the Aegis Weapon System agencies. A single query searches across 30 databases and and Vertical Launch System

  3. Annual Proceedings of Selected Papers on the Practice of Educational Communications and Technology Presented at the Annual Convention of the Association for Educational Communications and Technology (32nd, Louisville, KY, 2009). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2009-01-01

    For the thirty-second year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. This volume includes papers presented at the national convention of the Association for Educational Communications and Technology held in Louisville, KY. This…

  4. High temperature turbine technology program. Phase II. Technology test and support studies. Annual technical progress report, January 1, 1979-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Work performed on the High Temperature Turbine Technology Program, Phase II - Technology Test and Support Studies during the period from January 1, 1979 through December 31, 1979 is summarized. Objectives of the program elements as well as technical progress and problems encountered during this Phase II annual reporting period are presented. Progress on design, fabrication and checkout of test facilities and test rigs is described. LP turbine cascade tests were concluded. 350 hours of testing were conducted on the LP rig engine first with clean distillate fuel and then with fly ash particulates injected into the hot gas stream. Design and fabrication of the turbine spool technology rig components are described. TSTR 60/sup 0/ sector combustor rig fabrication and testing are reviewed. Progress in the design and fabrication of TSTR cascade rig components for operation on both distillate fuel and low Btu gas is described. The new coal-derived gaseous fuel synthesizing facility is reviewed. Results and future plans for the supporting metallurgical programs are discussed.

  5. Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000. Part II. Engineering, technology development and application aspects

    Science.gov (United States)

    Costamagna, Paola; Srinivasan, Supramaniam

    The technology of proton exchange membrane fuel cells (PEMFCs) has now reached the test-phase, and engineering development and optimization are vital in order to achieve to the next step of the evolution, i.e. the realization of commercial units. This paper highlights the most important technological progresses in the areas of (i) water and thermal management, (ii) scale-up from single cells to cell stacks, (iii) bipolar plates and flow fields, and (iv) fuel processing. Modeling is another aspect of the technological development, since modeling studies have significantly contributed to the understanding of the physico-chemical phenomena occurring in a fuel cell, and also have provided a valuable tool for the optimization of structure, geometry and operating conditions of fuel cells and stacks. The 'quantum jumps' in this field are reviewed, starting from the studies at the electrode level up to the stack and system size, with particular emphasis on (i) the 'cluster-network' model of perfluorosulfonic membranes, and the percolative dependence of the membrane proton conductivity on its water content, (ii) the models of charge and mass transport coupled to electrochemical reaction in the electrodes, and (iii) the models of water transport trough the membrane, which have been usefully applied for the optimization of water management of PEMFCs. The evolution of PEMFC applications is discussed as well, starting from the NASA's Gemini Space Flights to the latest developments of fuel cell vehicles, including the evolutions in the areas of portable power sources and residential and building applications.

  6. Heavy-Section Steel Technology Program. Semiannual progress report, October 1991--March 1992: Volume 9, No. 1

    Energy Technology Data Exchange (ETDEWEB)

    Pennell, W E [Oak Ridge National Lab., TN (United States)

    1992-11-01

    The Heavy-Section Steel Technology (HSST) Program is conducted for the Nuclear Regulatory Commission (NRC) by Oak Ridge National Laboratory (ORNL). The program focus is on the development and validation of technology for the assessment of fracture-prevention margins in commercial nuclear reactor pressure vessels. The HSST Program is organized in 11 tasks: program management, fracture methodology and analysis, material characterization and properties, special technical assistance, fracture analysis computer programs, cleavage-crack initiation, cladding evaluations, pressurized-thermal-shock technology, analysis methods validation, fracture evaluation tests, and warm prestressing. The program tasks have been structured to place emphasis on the resolution fracture issues with near-term licensing significance. Resources to execute the research tasks are drawn from ORNL with subcontract support from universities and other research laboratories. Close contact is maintained with the sister Heavy-Section Steel Irradiation (HSSI) Program at ORNL and with related research programs both in the United States and abroad. This report provides an overview of principal developments in each of the II program tasks from October 1, 1991 to March 31, 1992.

  7. MDRl/P-Glycoprotein Function. II. Effect of Hypotonicity and Inhibitors on Cl- Efflux and Volume Regulation

    Science.gov (United States)

    1996-01-01

    ability of MDR1-expressing vs. parental cells multidrug resistance; P-glycoprotein; chloride channel. chlo- to carry out a regulatory volume decrease...NIH/ fibrosis transmembrane conductance regulator ( CFTR ), 3T3MDR murine fibroblasts, FEM-X and FEM-XvMDR which is a Cl- channel (20). The MDR1...the fact chloride channels in volume regulation by T lymphocytes. In: that valinomycin is also an inhibitor of MDR1 trans- Cell Physiology of Blood

  8. Turbo system technology for downsized high volume engines with PZEV capability

    Energy Technology Data Exchange (ETDEWEB)

    Bjoernsson, Haakan; Johansson, Lena [Volvo Car Corp., Gothenburg (Sweden)

    2008-07-01

    Turbo charging is not anymore only used for exotic high performance vehicles. Instead boosting technology will be used to provide high specific power output, reduced fuel consumption and consequently lower CO2 emissions for all types of vehicles in the future. The main reason for this change is the obvious need for a shift towards more fuel efficient down-sized engines which output that enables a lower fuel consumption. This new way of using turbo charging introduces a new set of demands which needs to be fulfilled before this technology can be applied efficiently in to mass production. Since one of the most basic down-sizing features is a high specific low end torque with an associated excellent transient behavior at low speeds, the overall charging efficiency, must be high over a broad speed and load range. The down-sizing effect also imply a more frequent use of the high specific power, which means that smaller engines needs to cope with a high exhaust gas temperature more often. High specific power output also has to be combined with strict US and EC emission legislation i.e. fulfillment of PZEV and Euro 6 emissions. This will add new challenges to turbo system development. Simultaneously, material prices have increased significantly over the last five years. Unfortunately, these new requirements have a tendency to push the piece price in the wrong direction, which means that down-sizing have a tendency to add high on-cost to the most price sensitive products. Therefore, the aim of this paper is to discuss possible solutions for future turbo system technology. (orig.)

  9. Bibliography on Cold Regions Science and Technology Volume 53, Part 2

    Science.gov (United States)

    1999-12-01

    the velocity distribution in ping-pong- Martian north polar cap 1996-1997 [1999, eng] 53-3536 Ishii , S. ball avalanches [1998, eng] 53-2020 Iwasaki...warming [1988, Siberian Platform [1997, eng] 53-1740 Scharroo, R. eng] 53-1118 Sawa ,Y. Antarctic elevation change from 1992 to 1996 [1998, Schlich,R. Size...freezing technology for environmental remediation. road surface. Ishii , S., et al, [1998,eng] 53-2958 Atlantic Oceans-Reykjanes Ridge Dash, J.G., [1999,eng

  10. Light sources for high-volume manufacturing EUV lithography: technology, performance, and power scaling

    Science.gov (United States)

    Fomenkov, Igor; Brandt, David; Ershov, Alex; Schafgans, Alexander; Tao, Yezheng; Vaschenko, Georgiy; Rokitski, Slava; Kats, Michael; Vargas, Michael; Purvis, Michael; Rafac, Rob; La Fontaine, Bruno; De Dea, Silvia; LaForge, Andrew; Stewart, Jayson; Chang, Steven; Graham, Matthew; Riggs, Daniel; Taylor, Ted; Abraham, Mathew; Brown, Daniel

    2017-06-01

    Extreme ultraviolet (EUV) lithography is expected to succeed in 193-nm immersion multi-patterning technology for sub-10-nm critical layer patterning. In order to be successful, EUV lithography has to demonstrate that it can satisfy the industry requirements in the following critical areas: power, dose stability, etendue, spectral content, and lifetime. Currently, development of second-generation laser-produced plasma (LPP) light sources for the ASML's NXE:3300B EUV scanner is complete, and first units are installed and operational at chipmaker customers. We describe different aspects and performance characteristics of the sources, dose stability results, power scaling, and availability data for EUV sources and also report new development results.

  11. Army Science and Technology Master Plan, Fiscal Year 1997 - Volume 2.

    Science.gov (United States)

    1996-12-01

    be demonstrated in FY97 and 98, respectively, to exploit both commercial CDMA and BCDMA technology for MSE access. In order to extend ATM services to...Florence John Appel MAJ Paul Begeman TARDEC SARD-TT Armor Center, DFD (810)574-5473 697-8432 (502)624-8994 DSN : 786-5473 227-8432 464-8994 III.G.06. Hit...AATD SARDA-TF Avn Center (DCD) ATZQ-CD 804-878-4130 703-697-8434 334-255-3370/3489 DSN 927-4130 DSN 227-8434 DSN 558 A-4-2 D. AIR AND SPACE VEHICLES

  12. Conceptual design and systems analysis of photovoltaic power systems. Volume III(1). Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pittman, P.F.

    1977-05-01

    Conceptual designs were made and analyses were performed on three types of solar photovoltaic power systems. Included were Residential (1 to 10 kW), Intermediate (0.1 to 10 MW), and Central (50 to 1000 MW) Power Systems to be installed in the 1985 to 2000 time period. Subsystem technology presented here includes: insolation, concentration, silicon solar cell modules, CdS solar cell module, array structure, battery energy storage, power conditioning, residential power system architectural designs, intermediate power system structural design, and central power system facilities and site survey.

  13. Planetary/DOD entry technology flight experiments. Volume 2: Planetary entry flight experiments

    Science.gov (United States)

    Christensen, H. E.; Krieger, R. J.; Mcneilly, W. R.; Vetter, H. C.

    1976-01-01

    The technical feasibility of launching a high speed, earth entry vehicle from the space shuttle to advance technology for the exploration of the outer planets' atmospheres was established. Disciplines of thermodynamics, orbital mechanics, aerodynamics propulsion, structures, design, electronics and system integration focused on the goal of producing outer planet environments on a probe shaped vehicle during an earth entry. Major aspects of analysis and vehicle design studied include: planetary environments, earth entry environment capability, mission maneuvers, capabilities of shuttle upper stages, a comparison of earth entry planetary environments, experiment design and vehicle design.

  14. GREAT I Study of the Upper Mississippi River. Technical Appendixes. Volume 5. Fish and Wildlife. Part II.

    Science.gov (United States)

    1980-09-01

    the water is chocked with living and dead vegetation. A surface layer of living algae , and rooted and floating plants cover a dense mass of dead and...8217-." -Caya Slough - Dead Slough -. : -Harpers Slough -Upper Mud Hen Cut -Little Louie Slough -Minnesota Slough * -Nelson Cut -DeSota Bay - Greymore Lake...bulrush (Scirpus * spp. . (Also see Table II.) Submerged Vegetation - Table II. Algae - Filamentous algae was noted near Station #3 in the 2nd lake

  15. Industrial applications study. Volume III. Technology data base evaluation of waste recovery systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Harry L.; Hamel, Bernard B.; Karamchetty, Som; Steigelmann, William H.; Gajanana, Birur C.; Agarwal, Anil P.; Klock, Lawrence W.; Henderson, James M.; Calobrisi, Gary; Hedman, Bruce A.; Koluch, Michael; Biancardi, Frank; Bass, Robert; Landerman, Abraham; Peters, George; Limaye, Dilip; Price, Jeffrey; Farr, Janet

    1977-01-01

    An analytical study was undertaken to estimate the present and potential technical and economic characteristics of a wide range of components and complete systems capable of converting industrial and commercial waste heat into mechanical or electrical power and/or building and process heating and cooling. The component and system technologies evaluated include: Rankine-, Stirling-, and Brayton-cycle power systems; reciprocating-, rotary-, and turbo-expanders; heat exchangers and heat pumps; thermally driven cooling and dehumidification systems; and integrated systems capable of providing multiple outputs. Extensive analyses were conducted of Rankine-cycle systems using steam, halogenated hydrocarbons, and other organic compounds as working fluids. Performance characteristics, recoverable output power, and installed costs were estimated and are presented herein for Rankine-cycle systems utilizing selected working fluids over a range of waste heat source temperatures between approximately 200 and 1000/sup 0/F. Data describing the performance capabilities, technology and installed costs of heat exchangers, expanders and thermally driven absorption, vapor compression, steam-jet cooling and refrigeration systems are presented herein together with limited performance and cost estimates for Stirling-cycle power recovery systems. The component and system data were used to provide a preliminary assessment of the recoverable energy and associated system costs when integrated with generalized waste heat sources identified by Drexel University from their two-digit SIC industrial energy survey.

  16. Renewable Electricity Futures Study. Volume 2: Renewable Electricity Generation and Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Augustine, C.; Bain, R.; Chapman, J.; Denholm, P.; Drury, E.; Hall, D.G.; Lantz, E.; Margolis, R.; Thresher, R.; Sandor, D.; Bishop, N.A.; Brown, S.R.; Cada, G.F.; Felker, F.

    2012-06-01

    The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%-90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT).

  17. Renewable Electricity Futures Study. Volume 2. Renewable Electricity Generation and Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Augustine, Chad [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bain, Richard [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chapman, Jamie [Texas Tech Univ., Lubbock, TX (United States); Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Drury, Easan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hall, Douglas G. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lantz, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thresher, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sandor, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bishop, Norman A. [Knight Piesold, Denver, CO (United States); Brown, Stephen R. [HDR/DTA, Portland, ME (Untied States); Cada, Glenn F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Felker, Fort [National Renewable Energy Lab. (NREL), Golden, CO (United States); Fernandez, Steven J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Goodrich, Alan C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hagerman, George [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Heath, Garvin [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Neil, Sean [Ocean Renewable Energy Coalition, Portland, OR (United States); Paquette, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Young, Katherine [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2012-06-15

    The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%–90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT). Learn more at the RE Futures website. http://www.nrel.gov/analysis/re_futures/

  18. Nanoprobe NAPPA Arrays for the Nanoconductimetric Analysis of Ultra-Low-Volume Protein Samples Using Piezoelectric Liquid Dispensing Technology

    Directory of Open Access Journals (Sweden)

    Eugenia Pechkova

    2015-03-01

    Full Text Available In the last years, the evolution and the advances of the nanobiotechnologies applied to the systematic study of proteins, namely proteomics, both structural and functional, and specifically the development of more sophisticated and largescale protein arrays, have enabled scientists to investigate protein interactions and functions with an unforeseeable precision and wealth of details. Here, we present a further advancement of our previously introduced and described Nucleic Acid Programmable Protein Arrays (NAPPA-based nanoconductometric sensor. We coupled Quartz Crystal Microbalance with Dissipation factor Monitoring (QCM_D with piezoelectric inkjet printing technology (namely, the newly developed ActivePipette, which enables to significantly reduce the volume of probe required for genes/proteins arrays. We performed a negative control (with master mix, or MM and a positive control (MM_p53 plus MDM2. We performed this experiment both in static and in flow, computing the apparent dissociation constant of p53-MDM2 complex (130 nM, in excellent agreement with the published literature. We compared the results obtained with the ActivePipette printing and dispensing technology vs. pin spotting. Without the ActivePipette, after MDM2 addition the shift in frequency (Δf was 7575 Hz and the corresponding adsorbed mass was 32.9 μg. With the ActivePipette technology, after MDM2 addition Δf was 7740 Hz and the corresponding adsorbed mass was 33.6 μg. With this experiment, we confirmed the sensing potential of our device, being able to discriminate each gene and protein as well as their interactions, showing for each one of them a unique conductance curve. Moreover, we obtained a better yield with the ActivePipette technology.

  19. Complete blood count using VCS (volume, conductivity, light scatter) technology is affected by hyperlipidemia in a child with acute leukemia.

    Science.gov (United States)

    Gokcebay, D G; Azik, F M; Isik, P; Bozkaya, I O; Kara, A; Tavil, E B; Yarali, N; Tunc, B

    2011-12-01

    Asparaginase, an effective drug in the treatment of childhood acute lymphoblastic leukemia (ALL), has become an important component of most childhood ALL regimens during the remission induction or intensification phases of treatment. The incidence range of asparaginase-associated lipid abnormalities that are seen in children is 67-72%. Lipemia causes erroneous results, which uses photometric methods to analyze blood samples. We describe a case of l-asparaginase-associated severe hyperlipidemia with complete blood count abnormalities. Complete blood count analysis was performed with Beckman COULTER(®) GEN·S™ system, which uses the Coulter Volume, Conductivity, Scatter technology to probe hydrodynamically focused cells. Although an expected significant inaccuracy in hemoglobin determination occurred starting from a lipid value of 3450 mg/dl, we observed that triglyceride level was 1466 mg/dl. Complete blood count analysis revealed that exceptionally high hemoglobin, mean corpuscular hemoglobin, and mean corpuscular hemoglobin concentration levels vs. discordant with red blood cell count, mean corpuscular volume, and hematocrit levels. Total leukocyte count altered spontaneously in a wide range, and was checked with blood smear. Platelet count was in expected range (Table 1). Thus, we thought it was a laboratory error, and the patient's follow-up especially for red cell parameters was made by red blood cell and hematocrit values.

  20. Central receiver solar thermal power system. Phase 1. CDRL item 2; Pilot Plant preliminary design report. Volume II. System decription and system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hallet, Jr., R. W.; Gervais, R. L.

    1977-10-01

    An active system analysis and integration effort has been maintained. These activities have included the transformation of initial program requirements into a preliminary system design, the evolution of subsystem requirements which lay the foundation for subsystem design and test activity, and the overseeing of the final preliminary design effort to ensure that the subsystems are operationally compatible and capable of producing electricity at the lowest possible cost per unit of energy. Volume II of the Preliminary Design Report presents the results of the overall system effort that went on during this contract. The effort is assumed to include not only the total system definition and design but also all subsystem interactions.

  1. Solar thermal technology development: Estimated market size and energy cost savings. Volume 1: Executive summary

    Science.gov (United States)

    Gates, W. R.

    1983-01-01

    Estimated future energy cost savings associated with the development of cost-competitive solar thermal technologies (STT) are discussed. Analysis is restricted to STT in electric applications for 16 high-insolation/high-energy-price states. The fuel price scenarios and three 1990 STT system costs are considered, reflecting uncertainty over future fuel prices and STT cost projections. STT R&D is found to be unacceptably risky for private industry in the absence of federal support. Energy cost savings were projected to range from $0 to $10 billion (1990 values in 1981 dollars), dependng on the system cost and fuel price scenario. Normal R&D investment risks are accentuated because the Organization of Petroleum Exporting Countries (OPEC) cartel can artificially manipulate oil prices and undercut growth of alternative energy sources. Federal participation in STT R&D to help capture the potential benefits of developing cost-competitive STT was found to be in the national interest.

  2. Lewis Structures Technology, 1988. Volume 3: Structural Integrity Fatigue and Fracture Wind Turbines HOST

    Science.gov (United States)

    1988-01-01

    The charter of the Structures Division is to perform and disseminate results of research conducted in support of aerospace engine structures. These results have a wide range of applicability to practioners of structural engineering mechanics beyond the aerospace arena. The specific purpose of the symposium was to familiarize the engineering structures community with the depth and range of research performed by the division and its academic and industrial partners. Sessions covered vibration control, fracture mechanics, ceramic component reliability, parallel computing, nondestructive evaluation, constitutive models and experimental capabilities, dynamic systems, fatigue and damage, wind turbines, hot section technology (HOST), aeroelasticity, structural mechanics codes, computational methods for dynamics, structural optimization, and applications of structural dynamics, and structural mechanics computer codes.

  3. Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.; Steward, Heidi E.; Love, Pat M.

    2007-06-04

    This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of production builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.

  4. Solar thermal technology development: Estimated market size and energy cost savings. Volume 1: Executive summary

    Science.gov (United States)

    Gates, W. R.

    1983-02-01

    Estimated future energy cost savings associated with the development of cost-competitive solar thermal technologies (STT) are discussed. Analysis is restricted to STT in electric applications for 16 high-insolation/high-energy-price states. The fuel price scenarios and three 1990 STT system costs are considered, reflecting uncertainty over future fuel prices and STT cost projections. STT R&D is found to be unacceptably risky for private industry in the absence of federal support. Energy cost savings were projected to range from $0 to $10 billion (1990 values in 1981 dollars), dependng on the system cost and fuel price scenario. Normal R&D investment risks are accentuated because the Organization of Petroleum Exporting Countries (OPEC) cartel can artificially manipulate oil prices and undercut growth of alternative energy sources. Federal participation in STT R&D to help capture the potential benefits of developing cost-competitive STT was found to be in the national interest.

  5. Proceedings of the Twentieth International Symposium on Space Technology and Science. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-31

    The 20th International Symposium on Space Technology and Science was held in Japan on May 19-25, 1996, and a lot of papers were made public. This proceedings has 252 papers of all the papers read in the symposium including the following: Computational fluid dynamics in the design of M-V rocket motors in the propulsion field; Joint structures of carbon-carbon composites in the field of materials and structures; On-orbit attitude control experiment of ETS-VI in the field of astrodynamics, navigation, guidance and control; Magnetic transport of bubbles in liquid in microgravity; The outline and development status of JEM-EF in the field of on-orbit and ground support systems. The proceedings also includes the papers titled Conceptual study of H-IIA rocket in the space transportation field; Microgravity research in the microgravity science field; `Project Genesys` in the field of satellite communications and broadcasting.

  6. Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume II. Proliferation resistance

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The purpose of this volume is limited to an assessment of the relative effects that particular choices of nuclear-power systems, for whatever reasons, may have on the possible spread of nuclear-weapons capabilities. This volume addresses the concern that non-nuclear-weapons states may be able to initiate efforts to acquire or to improve nuclear-weapons capabilities through civilian nuclear-power programs; it also addresses the concern that subnational groups may obtain and abuse the nuclear materials or facilities of such programs, whether in nuclear-weapons states (NWS's) or nonnuclear-weapons states (NNW's). Accordingly, this volume emphasizes one important factor in such decisions, the resistance of nuclear-power systems to the proliferation of nuclear-weapons capabilities.

  7. Solar Pilot Plant, Phase I. Preliminary design report. Volume II. System description and system analysis. CDRL item 2

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    Honeywell conducted a parametric analysis of the 10-MW(e) solar pilot plant requirements and expected performance and established an optimum system design. The main analytical simulation tools were the optical (ray trace) and the dynamic simulation models. These are described in detail in Books 2 and 3 of this volume under separate cover. In making design decisions, available performance and cost data were used to provide a design reflecting the overall requirements and economics of a commercial-scale plant. This volume contains a description of this analysis/design process and resultant system/subsystem design and performance.

  8. Power train and emission control: allocation procedure by OBD-II system for automotive technology

    Science.gov (United States)

    Kalita, Porag

    2017-06-01

    OBD-II, systems were designed to maintain low emissions of in use vehicles, including light and medium duty vehicles. In 1989, the California code of Regulations (CCR) known as OBD - II was adopted by the California Air Resource Board (CARB) and the objective to reduce hydrocarbon (HC) emission caused by malfunction of the vehicles emission control systems. OBD-II provides additional information to engineer for diagnosis and repair of emissions related problems. OBD-II, standardizes on the amount of memory (Freeze Frame) it uses to store the readings of the vehicle sensor when it logs on emission related Intermittent Trouble code (IT). The intent of OBD-II, systems is to detect most vehicle malfunctions when performance of a power train component or system deteriorates to the point that the vehicle’s HC emission exceed standard. The vehicle operator is notified at the time when the vehicle begins to marginally exceed emission standards, by illuminating the Malfunctions Indicator Light (MIL).

  9. Transforming Science and Technology: Our Future Depends on It. Volume 1 [and] Volume 2: Proceedings and Contributions to the International Gender and Science and Technology Conference (7th, Waterloo, Ontario, Canada, July 31-August 5, 1993) = Transformer les sciences et la technologie: notre avenir en depend. Volume 1 [and] Volume 2. Les soumissions a la septieme conference internationale sur l'equite des sexes en science et en technologie (du 31 juillet au 5 aout 1993).

    Science.gov (United States)

    Haggerty, Sharon, Ed.; Holmes, Ann, Ed.

    This two-volume set of papers was produced for the seventh International Gender and Science and Technology (GASTA) Conference. Abstracts of all papers and other presentations have been translated and are published in both English and French. Papers are published in the language in which they were submitted (English or French). GASAT provides a…

  10. Study of power management technology for orbital multi-100KWe applications. Volume 2: Study results

    Science.gov (United States)

    Mildice, J. W.

    1980-07-01

    The preliminary requirements and technology advances required for cost effective space power management systems for multi-100 kilowatt requirements were identified. System requirements were defined by establishing a baseline space platform in the 250 KE KWe range and examining typical user loads and interfaces. The most critical design parameters identified for detailed analysis include: increased distribution voltages and space plasma losses, the choice between ac and dc distribution systems, shuttle servicing effects on reliability, life cycle costs, and frequency impacts to power management system and payload systems for AC transmission. The first choice for a power management system for this kind of application and size range is a hybrid ac/dc combination with the following major features: modular design and construction-sized minimum weight/life cycle cost; high voltage transmission (100 Vac RMS); medium voltage array or = 440 Vdc); resonant inversion; transformer rotary joint; high frequency power transmission line or = 20 KHz); energy storage on array side or rotary joint; fully redundant; and 10 year life with minimal replacement and repair.

  11. An Evaluation of the Mulligan Stew 4-H Television Series for Extension Service, USDA. Volume II: Report of the Study.

    Science.gov (United States)

    Shapiro, Sydelle Stone; And Others

    Conducted on over 3,000 fourth, fifth, and sixth grade children in six states, this study documents changes in nutrition-related knowledge and behaviors which can be related to participating in the Mulligan Stew television series. This volume is a detailed elaboration of the study findings as well as a description of the study design,…

  12. AN INVESTIGATION OF THE TRAINING AND SKILL REQUIREMENTS OF INDUSTRIAL MACHINERY MAINTENANCE WORKERS. VOLUME II. FINAL REPORT.

    Science.gov (United States)

    LYNN, FRANK

    THE APPENDIXES FOR "AN INVESTIGATION OF THE TRAINING AND SKILL REQUIREMENTS OF INDUSTRIAL MACHINERY MAINTENANCE WORKERS, FINAL REPORT, VOLUME I" (VT 004 006) INCLUDE (1) TWO LETTERS FROM PLANT ENGINEERS STRESSING THE IMPORTANCE OF TRAINING MACHINERY MAINTENANCE WORKERS, (2) A DESCRIPTION OF THE MAINTENANCE TRAINING SURVEY, A SAMPLE QUESTIONNAIRE,…

  13. Contemporary American Success Stories: Famous People of Hispanic Heritage. Volume II. A Mitchell Lane Multicultural Biography Series.

    Science.gov (United States)

    Marvis, Barbara J.

    The biographies in this projected eight volume series for elementary school children represent the diversity of Hispanic heritage in the United States. Those featured are contemporary figures with national origins in the United States or Latin America, with careers that cover many aspects of contemporary life. Every person profiled in the series…

  14. Entrepreneurship Education for Agriculture. Phase "O" Planning Project Report. Performance Report. Volume II: Bibliography and Storyboard Scripts.

    Science.gov (United States)

    Lee and Associates, Starkville, MS.

    Volume 2 of this report is supplementary and contains three bibliographies: (1) Annotated Bibliography on Minority Entrepreneurship in Agriculture; (2) Annotated Bibliography on Entrepreneurship Education in Agriculture; (3) Bibliography on Entrepreneurship. The next section presents three storyboard scripts for instructional videotapes on…

  15. The Feasibility of the Georgia Educational Model for Teacher Preparation--Elementary. Volume II A & B. Technical Report.

    Science.gov (United States)

    Johnson, Charles E., Ed.; And Others

    The two sections of volume 2 of the Georgia feasibility study on elementary teacher education are intended for readers who wish for a detailed analysis of the study's activities and findings. The first section contains detailed PERT charts for the 5-year development strategy, activity lists, and the time data and time reports. The second section…

  16. The Joint Logistics-over-the-Shore (LOTS) Test and Evaluation Report. Volume II. Analysis of Test Results.

    Science.gov (United States)

    1979-01-05

    II with one minor exception in the case of two privately owned U.S. ships requisitioned during the 1958 Lebanon crisis .2 For the Korean conflict ships...system the barge-TCDF has a critica ! deployment weakness due to its size and weight and it is sea state sensitive. However, it is highly productive in

  17. Hubungan Nilai Mean Platelet Volume (MPV dengan Skor APACHE II sebagai Prediktor Mortalitas pada Pasien Sepsis Berat di Rumah Sakit Umum Pusat Haji Adam Malik Medan

    Directory of Open Access Journals (Sweden)

    M. Teguh Prihardi

    2016-12-01

    Full Text Available Severe sepsis is a general condition in the Intensive Care Unit (ICU and inpatient wards which correlates with mortality, morbidity, and high cost hospitalization. The main point of this study was to explore the possibility to use the mean platelet volume (MPV as an easier alternative score for mortality predictor in addition to APACHE II score in severe sepsis patients. This study used cross-sectional design on 76 adult severe sepsis patients in Haji Adam Malik General Hospital Medan who met inclusion criteria during the periood of October 2015 to January 2016. Data collected were MPV value and APACHE II score, which were collected the first time patient was diagnosed as having severe sepsis which was then observed for their mortality The Spearman correlation tests showed that there was a weak yet significant correlation (p=0.006 between MPV and APACHE II with r (correlation = 0.314. The MPV values in this study were unable to predict mortality (AUC ROC 58.2% (95% CI: 45.1–71.2%, p=0.223. whereas the APACHE II score has a moderate ability to predict mortality (AUC ROC 70,4% (95% CI: 58,6–82,2%, p= 0.002. The cut-off point of APACHE II was 19 with a sensitivity of 65.9% and a specificity of 65.7%, and a PPV of 69.2% and NPV of 62.2%. Therefore, based on this study the MPV score cannot be used as a mortality predictor in severe sepsis patients.

  18. Tenth annual coal preparation, utilization, and environmental control contractors conference: Proceedings. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    Volume II contains papers presented at the following sessions: combustion 2000 session; advanced research and technology development session; commercial/industrial combustion systems session; alternative fuels utilization session; environmental control poster session; and advanced combustion technology poster session. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  19. Developments and innovation in carbon dioxide (CO{sub 2}) capture and storage technology. Volume 1: carbon dioxide (CO{sub 2}) capture, transport and industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Mercedes Maroto-Valer, M. (ed.)

    2010-07-01

    This volume initially reviews the economics, regulation and planning of CCS for power plants and industry, and goes on to explore developments and innovation in post- and pre-combustion and advanced combustion processes and technologies for CO{sub 2} capture in power plants. This coverage is extended with sections on CO{sub 2} compression, transport and injection and industrial applications of CCS technology, including in the cement and concrete and iron and steel industries.

  20. Comparative ranking of 0. 1-10 MW/sub e/ solar thermal electric power systems. Volume II. Supporting data. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, J.P.; Brown, K.C.; Finegold, J.G.; Gresham, J.B.; Herlevich, F.A.; Kriz, T.A.

    1980-07-01

    This report is part of a two-volume set summarizing the results of a comparative ranking of generic solar thermal concepts designed specifically for electric power generation. The original objective of the study was to project the mid-1990 cost and performance of selected generic solar thermal electric power systems for utility applications and to rank these systems by criteria that reflect their future commercial acceptance. This study considered plants with rated capacities of 1-10 MW/sub e/, operating over a range of capacity factors from the no-storage case to 0.7 and above. Later, the study was extended to include systems with capacities from 0.1 to 1 MW/sub e/, a range that is attractive to industrial and other nonutility applications. Volume I summarizes the results for the full range of capacities from 0.1 to 1.0 MW/sub e/. Volume II presents data on the performance and cost and ranking methodology.

  1. Materials with complex behaviour II properties, non-classical materials and new technologies

    CERN Document Server

    Oechsner, Andreas

    2012-01-01

    This book reviews developments and trends in advanced materials and their properties; modeling and simulation of non-classical materials and new technologies for joining materials. Offers tools for characterizing and predicting properties and behavior.

  2. II. Evaluation of the impact of alternative light technology on male broiler chicken stress.

    Science.gov (United States)

    Rogers, Allison G; Pritchett, Elizabeth M; Alphin, Robert L; Brannick, Erin M; Benson, Eric R

    2015-03-01

    This study evaluates the impact of light-emitting diodes (LEDs), cold cathode fluorescent lamps (CCFLs), and incandescent lamps on broiler welfare in response to recent interest in the agriculture industry to transition to more energy-efficient lighting technologies. Male Ross 708 broilers (n=672) were raised to 6 wk age in 8 light-tight modified large colony houses under identical intermittent lighting conditions using 4 unique types of lamps, which were gradually dimmed throughout the study. Incandescent lamps served as the control; experimental technologies tested were a CCFL, and 2 different LED lamps. Each technology was tested in duplicate for each of the 4 trials (8 replications total per technology) conducted across the course of one year to account for seasonal variance. Birds were removed from each house at days 7, 14, 35, and 42 to be humanely euthanized and weighed for necropsy evaluation and comparison of body mass. Blood collection via cardiac puncture was performed to obtain heterophil to lymphocyte (H:L) ratios for evaluation of environmental stress. Birds raised under CCFLs had significantly lower body weights (2,871 g±53) than the control (3,000±33 g) by 42 d. Birds raised under CCFLs additionally had significantly higher H:L ratios (0.68±0.06) than the control (0.53±0.03), indicating that these birds may have been chronically stressed (P=0.03). There were not significant differences in the H:L ratio between LED technologies at α=0.05. A significant age and seasonal correlation in H:L ratios was observed across all technologies, along with significant differences among birds raised under the experimental technologies. This study indicates that variation in broiler body weight and stress may be attributed in part to lighting technologies implemented in broiler houses.

  3. Developing a sustainable energy strategy for a water utility. Part II: A review of potential technologies and approaches.

    Science.gov (United States)

    Zakkour, P D; Gaterell, M R; Griffin, P; Gochin, R J; Lester, J N

    2002-10-01

    Environmental legislation is increasing the amounts of bought-in electricity required for sewage treatment, and generating larger volumes of sewage sludge to be treated and disposed of. Concurrently, concerns over global warming and food safety from sewage sludge recycling on agricultural land is augmenting the costs of conventional sewage and sludge treatment technologies and practices. This paper reviews some emerging technologies and practices that may assist in mitigating these problems in the future. In addition, a number of potential renewable energy technologies available to water companies are reviewed. Results suggest that through the take-up of new technologies, current and future water quality standards could be delivered in a more sustainable way. However, this series of papers also highlights that institutional and political conflicts may have inadvertently failed to recognise the wider effects of improving water quality and lessened the financial support necessary for their widespread take-up. It is also suggested that through the use of a Strategic Environmental Assessment (SEA) approach, stakeholders could gain a better understanding of the broader environmental effects of achieving certain water quality standards and develop policy and long-term investment strategies accordingly. However, to fulfill the information requirements of an SEA, an appropriate appraisal tool that considers many of these factors in unison is required, and a possible technique is suggested.

  4. Development of a community energy conservation program. Volume II. Energy saving techniques for use by local governments

    Energy Technology Data Exchange (ETDEWEB)

    1976-11-26

    This volume contains technical material related to community energy conservation programs, and supplements the organizational material in Volume I. It is in looseleaf format so that sections related to specific topics can be easily copied or transferred to individuals responsible for various sorts of conservation, such as carpooling programs, building improvements, and community outreach. Three technical chapters are included, discussing topics in the areas of: internal city and county operations; community powers and regulations, and outreach programs. In the first, the concern is with what the community can do to reduce energy use in its own operations, an effective first step in promoting comprehensive energy conservation. The second chapter analyzes ways that the police power and fiscal powers of the community can be used for energy conservation, through building codes, zoning, and similar measures. In the final chapter, ways to promote energy conservation in the community are discussed: programs include outreach to households and firms, carpool promotion, waste oil recycling, etc.

  5. Inventory of Federal energy-related environment and safety research for FY 1979. Volume II. Project listings and indexes

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-12-01

    This volume contains summaries of FY 1979 government-sponsored environment and safety research related to energy arranged by log number, which groups the projects by reporting agency. The log number is a unique number assigned to each project from a block of numbers set aside for each contributing agency. Information elements included in the summary listings are project title, principal investigators, research organization, project number, contract number, supporting organization, funding level, related energy sources with numbers indicating percentages of effort devoted to each, and R and D categories. A brief description of each project is given, and this is followed by subject index terms that were assigned for computer searching and for generating the printed subject index in the back of this volume.

  6. Inventory of Federal energy-related environment and safety research for FY 1978. Volume II. Project listings and indexes

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-12-01

    This volume contains summaries of FY-1978 government-sponsored environment and safety research related to energy. Project summaries were collected by Aerospace Corporation under contract with the Department of Energy, Office of Program Coordination, under the Assistant Secretary for Environment. Summaries are arranged by log number, which groups the projects by reporting agency. The log number is a unique number assigned to each project from a block of numbers set aside for each agency. Information about the projects is included in the summary listings. This includes the project title, principal investigators, research organization, project number, contract number, supporting organization, funding level if known, related energy sources with numbers indicating percentages of effort devoted to each, and R and D categories. A brief description of each project is given, and this is followed by subject index terms that were assigned for computer searching and for generating the printed subject index in Volume IV.

  7. Smolt Monitoring Program, Volume II, Migrational Characteristics of Columbia Basin Salmon and Steelhead Trout, 1986 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Fish Passage Center

    1987-02-01

    Smolt Monitoring Program Annual Report, 1986, Volume I, describes the results of travel time monitoring and other migrational characteristics of yearling and sub-yearling chinook salmon (Oncorhynchus tshawytscha), sockeye salmon (Oncorhynchus nerka), and steelhead trout (Salmo gairdneri). This volume presents the data from Fish Passage Center freeze brands used in the analysis of travel time for Lewiston, Lower Granite, Lower Monumental, Rock Island, McNary, and John Day dams. Summary of data collection procedures and explanation of data listings are presented in conjunction with the mark recapture data. Data for marked fish not presented in this report will be provided upon request. Daily catch statistics (by species), flow, and sample parameters for the smolt monitoring sites, Clearwater, Lewiston, Lower Granite, Lower Monumental, Rock Island, McNary, John Day, and Bonneville also will be provided upon request.

  8. Potential use of geothermal resources in the Snake River Basin: an environmental overview. Volume II. Annotated bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, S.G.; Russell, B.F.; Sullivan, J.F. (eds.)

    1979-09-01

    This volume is a partially annotated bibliography of reference materials pertaining to the seven KGRA's. The bibliography is divided into sections by program element as follows: terrestrial ecology, aquatic ecology, heritage resources, socioeconomics and demography, geology, geothermal, soils, hydrology and water quality, seismicity, and subsidence. Cross-referencing is available for those references which are applicable to specific KGRA's. (MHR)

  9. The United States Remains Unprepared for Oil Import Disruptions. Volume II. Detailed Review of Current Emergency Programs and Alternative Approaches.

    Science.gov (United States)

    1981-09-29

    Conservation Act ERA Economic Regulatory Administration ERDO Emergency Reserve Drawdown Obligation ESS Emergency Sharing System ESSD Emergency Strategies and...a fraction of the base period volume. Each prime supplier (a refiner or wholesaler who first transports gasoline into a State) generally must use a...that State. Each prime supplier must set aside 5 percent of supply for this purpose. 1/See U.S. General Accounting Office, "Gasoline Allocation A Chaotic

  10. ENVIRONMENTAL TECHNOLOGY VERIFICATION, TEST REPORT OF CONTROL OF BIOAEROSOLS IN HVAC SYSTEMS: TRI-DIM FILTER CORP. PREDATOR II MODEL 8VADTP123C23

    Science.gov (United States)

    The Environmental Technology Verification report discusses the technology and performance of the Predator II, Model 8VADTP123C23CC000 air filter for dust and bioaerosol filtration manufactured by Tri-Dim Filter Corporation. The pressure drop across the filter was 138 Pa clean and...

  11. Citrus fruits--varieties, chemistry, technology, and quality evaluation. Part II. Chemistry, technology, and quality evaluation. A. Chemistry.

    Science.gov (United States)

    Ranganna, S; Govindarajan, V S; Ramana, K V

    1983-01-01

    In Part 2 of this review on citrus fruits, the literature on chemistry, technology, and quality evaluation are critically considered. Sweet oranges, mandarin, grapefruit, lemon, and lime are generally used for processing. The literature on chemical components of citrus fruit which include sugars, polysaccharides, oraganic acids, nitrogenous constituents and lipids; carotenoids which contribute to color; vitamins and minerals, and flavonoids; limonoids, some of which impart bitterness to the juice; and the volatile components which contribute to aroma have been reviewed. Chilled and pasteurized juices, juice concentrates, and beverages are the important products manufactured commercially, and to a limited extent powdered citrus juices, canned segments, and marmalades. The literature on the manufacture of these products also as new types of juice and oil extractors; TASTE and other types of evaporators; tank farms to store juice and concentrate in bulk; aseptic filling in bulk containers and retail packs; alternate flexible and rigid containers other than glass and tin; and recovery of volatile flavoring constituents during juice processing are some of the important technological developments in the recent past and have been discussed. Bitterness in citrus juices and its control, composition of cloud, and its stability and changes during storage have been reviewed. Essential oils, pectin, frozen and dried juice sacs, dried pulp and molasses, flavonoids, seed oil, and meal are the important byproducts, the manufacture of which is given in essential details. Generally, consumers judge the product on the basis of its sensory attributes. The quality of finished product is dependent upon the raw materials used and control of processes. The U.S. Department of Agriculture (USDA) standards for different products, physicochemical and microbiological parameters prescribed as indices of quality of fruit, juice, concentrate, and other products; composition of essential oils; and

  12. MX Siting Investigation. Geotechnical Evaluation of Luke Bombing and Gunnery Range. Geotechnical Report, Lechuguilla Desert, Arizona. Volume II. Appendix A.

    Science.gov (United States)

    1978-01-20

    on the depth scale. 6000 22000 24000 26000 1000 eoo K L LOCATION MAP 36 ______ 10 380 0 36:500,36 30 10 20 0 1002 NAUTICAL, 00E 0 10 20 NI LOll E AS...gi 4900 144 ?.;Co 701 7 tAT4 400 - iSO I17 -17 Qo C 2A 1 7 lp s 17 1AQ4 TT Wi *1* * a. * * hI *t **,#l A eli *1* it~ a.** * hl il h,),i * * ii i ii, a...sp 96 ss320 - -- -- - -- - ISO A -- ~ 7Z~ ~ - - A- S. c-f .- - * .~---- -~ -- I - i WAS- -2 UPS COLLE 24 W4ELL PROJEI 38 BORI~d ELEVAI STATE COUNTI

  13. Education and technology used to improve the quality of life for people with diabetes mellitus type II.

    Science.gov (United States)

    Dudley, Brooke; Heiland, Brianne; Kohler-Rausch, Elizabeth; Kovic, Mark

    2014-01-01

    The incidence of type II diabetes mellitus (DMT2) is expected to continue to rise. Current research has analyzed various tools, strategies, programs, barriers, and support in regards to the self-management of this condition. However, past researchers have yet to analyze the education process; including the adaptation of specific strategies in activities of daily living and roles, as well as the influence of health care providers in the integration of these strategies. The purpose of this qualitative case study was to identify the strengths and limitations of the current model of diabetes education in the United States and hypothesize how technology can impact quality of life. Key informants on diabetes education were recruited from diabetes education centers through the American Association of Diabetes Educators. Semi-structured interviews were conducted with participants. Health care practitioners convey limited knowledge of DMT2. Individuals with DMT2 often have limited understanding of the implications of poor self-management. There appears to be no consistent standard of care for how to effectively incorporate self-management strategies. There is limited education for the use of technology in self-management. Diabetes educators describe that technology could be beneficial. Findings suggest the importance of the role of care providers in emphasizing the implications of poor self-management strategies; that a multidisciplinary approach may enhance the education process; and a need for further developments in technology to address DMT2 self-management strategies.

  14. Field Surveys, IOC Valleys. Volume III, Part II. Cultural Resources Survey, Pine and Wah Wah Valleys, Utah.

    Science.gov (United States)

    1981-08-01

    including horse, camel, mammoth, Ertm E-TR-48-III-II 20 musk ox, and certain species of bison, goat, and bear, which had previously inhabited the marsh and...34 - - -9,$.. 𔄃 Im I I I Si to * Location lype/Contents Affiliation 42B@644 rid e over cr ek - P/J depression, cleared areas, Fr elon (f4-5-18-92) ground

  15. 150 kWe solar-powered deep well irrigation facility. Volume II. Main report. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1977-08-30

    The screening, selection, and detailed optimized design of a 150 kW solar-powered irrigation facility for construction on a farm in Arizona are described. The heliostat/central receiver collector system was selected, and a steam Rankine cycle power system using molten salt heat transfer fluid was chosen. Systems analyses and detailed designs of the subsystems are presented. Cost estimates are included, and the Phase II program plan is detailed. (WHK)

  16. Final report from VFL Technologies for the pilot-scale thermal treatment of Lower East Fork Poplar Creek floodplain soils. LEFPC appendices. Volume 5. Appendix V-D

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    This final report from VFL Technologies for the pilot-scale thermal treatment of lower East Fork Poplar Creek floodplain soils dated September 1994 contains LEFPC Appendices, Volume 5, Appendix V - D. This appendix includes the final verification run data package (PAH, TCLP herbicides, TCLP pesticides).

  17. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (36th, Anaheim, California, 2013). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.

    2013-01-01

    For the thirty-sixth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the annual AECT Convention in Anaheim, California. The Proceedings of AECT's Convention are published in two…

  18. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (38th, Indianapolis, Indiana, 2015). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.

    2015-01-01

    For the thirty-eighth time, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the annual AECT Convention in Indianapolis, Indiana. The Proceedings of AECT's Convention are published in two…

  19. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (32nd, Louisville, KY, 2009). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.

    2009-01-01

    For the thirty-second year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the national AECT Convention in Louisville, Kentucky. The Proceedings of AECT's Convention are published in two…

  20. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (37th, Jacksonville, Florida, 2014). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.

    2014-01-01

    For the thirty-seventh year, the Research and Theory Division and the Division of Instructional Design of the Association for Educational Communications and Technology (AECT) sponsored the publication of these Proceedings. Papers published in this volume were presented at the annual AECT Convention in Jacksonville, Florida. This year's Proceedings…

  1. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (36th, Anaheim, California, 2013). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2013-01-01

    For the thirty-sixth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the annual AECT Convention in Anaheim, California. The Proceedings of AECT's Convention are published in two…

  2. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (33rd, Anaheim, California, 2010). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.

    2010-01-01

    For the thirty-third year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the national AECT Convention in Anaheim, California. The Proceedings of AECT's Convention are published in two…

  3. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (35th, Louisville, Kentucky, 2012). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2012-01-01

    For the thirty-fifth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the national AECT Convention in Louisville, Kentucky. The Proceedings of AECT's Convention are published in two…

  4. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (35th, Louisville, Kentucky, 2012). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.

    2012-01-01

    For the thirty-fifth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the national AECT Convention in Louisville, Kentucky. The Proceedings of AECT's Convention are published in two…

  5. Annual Proceedings of Selected Research and Development Papers Presented at the National Convention of the Association for Educational Communications and Technology (28th, Orlando, Florida, 2005). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.; Crawford, Margaret, Ed.

    2005-01-01

    For the twenty-eighth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the National AECT Convention in Orlando, Florida. The Proceedings of AECT's Convention are published in two…

  6. Annual Proceedings of Selected Research and Development Papers Presented at the National Convention of the Association for Educational Communications and Technology (28th, Orlando, Florida, 2005). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.; Crawford, Margaret, Ed.

    2005-01-01

    For the twenty-eighth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the National AECT Convention in Orlando, Florida. The Proceedings of AECT's Convention are published in two…

  7. Technology of high-level nuclear waste disposal. Advances in the science and engineering of the management of high-level nuclear wastes. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, P.L. (ed.)

    1982-01-01

    The twenty papers in this volume are divided into three parts: site exploration and characterization; repository development and design; and waste package development and design. These papers represent the status of technology that existed in 1981 and 1982. Individual papers were processed for inclusion in the Energy Data Base.

  8. LIFAC Demonstration at Richmond Power and Light Whitewater Valley Unit No. 2 Volume II: Project Performance and Economics

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1998-04-01

    The C1ean Coal Technology (CCT) Program has been recognized in the National Energy Strategy as a major initiative whereby coal will be able to reach its full potential as a source of energy for the nation and the international marketplace. Attainment of this goal depends upon the development of highly efficient, environmentally sound, competitive coal utilization technologies responsive to diverse energy markets and varied consumer needs. The CCT Program is an effort jointly funded by government and industry whereby the most promising of the advanced coal-based technologies are being moved into the marketplace through demonstration. The CCT Program is being implemented through a total of five competitive solicitations. LIFAC North America, a joint venture partnership of ICF Kaiser Engineers, Inc., and Tampella Power Corporation, is currently demonstrating the LIFAC flue gas desulfurization technology developed by Tampella Power. This technology provides sulfur dioxide emission control for power plants, especially existing facilities with tight space limitations. Sulfur dioxide emissions are expected to be reduced by up to 85% by using limestone as a sorbent. The LIFAC technology is being demonstrated at Whitewater Valley Unit No. 2, a 60-MW coal-fired power plant owned and operated by Richmond Power and Light (RP&L) and located in Richmond, Indiana. The Whitewater plant consumes high-sulfur coals, with sulfur contents ranging from 2.0-2.9 $ZO. The project, co-funded by LIFAC North America and DOE, is being conducted with the participation of Richmond Power and Light, the State of Indiana, the Electric Power Research Institute (EPRI), and the Black Beauty Coal Company. The project has a total cost of $21.4 million and a duration of 48 months from the preliminary design phase through the testing program.

  9. DEVELOPMENT OF A NATURAL GAS SYSTEMS ANALYSIS MODEL (GSAM) VOLUME I - SUMMARY REPORT VOLUME II - USER'S GUIDE VOLUME IIIA - RP PROGRAMMER'S GUIDE VOLUME IIIB - SRPM PROGRAMMER'S GUIDE VOLUME IIIC - E&P PROGRAMMER'S GUIDE VOLUME IIID - D&I PROGRAMMER'S GUIDE

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2001-02-01

    This report summarizes work completed on DOE Contract DE-AC21-92MC28138, Development of a Natural Gas Systems Analysis Model (GSAM). The products developed under this project directly support the National Energy Technology Laboratory (NETL) in carrying out its natural gas R&D mission. The objective of this research effort has been to create a comprehensive, non-proprietary, microcomputer model of the North American natural gas market. GSAM has been developed to explicitly evaluate components of the natural gas system, including the entire in-place gas resource base, exploration and development technologies, extraction technology and performance parameters, transportation and storage factors, and end-use demand issues. The system has been fully tested and calibrated and has been used for multiple natural gas metrics analyses at NETL in which metric associated with NETL natural gas upstream R&D technologies and strategies under the direction of NETL has been evaluated. NETL's Natural Gas Strategic Plan requires that R&D activities be evaluated for their ability to provide adequate supplies of reasonably priced natural gas. GSAM provides the capability to assess potential and on-going R&D projects using a full fuel cycle, cost-benefit approach. This method yields realistic, market-based assessments of benefits and costs of alternative or related technology advances. GSAM is capable of estimating both technical and commercial successes, quantifying the potential benefits to the market, as well as to other related research. GSAM, therefore, represents an integration of research activities and a method for planning and prioritizing efforts to maximize benefits and minimize costs. Without an analytical tool like GSAM, NETL natural gas upstream R&D activities cannot be appropriately ranked or focused on the most important aspects of natural gas extraction efforts or utilization considerations.

  10. Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 1. Primary model documentation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bohn, Roger E.; Herod, J. Steven; Andrews, Gwen L.; Budzik, Philip M.; Eissenstat, Richard S.; Grossmann, John R.; Reiner, Gary M.; Roschke, Thomas E.; Shulman, Michael J.; Toppen, Timothy R.; Veno, William R.; Violette, Daniel M.; Smolinski, Michael D.; Habel, Deborah; Cook, Alvin E.

    1979-10-01

    ISTUM is designed to predict the commercial market penetration of various energy technologies in the industrial sector out to the year 2000. It is a refinement and further development of Market Oriented Program Planning Study task force in 1977. ISTUM assesses the comparative economic competitiveness of each technology and competes over 100 energy technologies - conventionals, fossil/energy, conservation, cogeneration, solar, and geothermal. A broad overview of the model, the solution of the model, and an in-depth discussion of strength and limitations of the model are provided in Volume I. (MCW)

  11. Technology Reinvestment Program/Advanced ``Zero Emission'' Control Valve (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    J. Napoleon

    1998-12-01

    The objectives of this effort are to determine, develop and demonstrate the feasibility of significantly reducing the cost and expanding the applications for a family of Advanced Zero Emissions Control Valves that meets the fugitive emissions requirements of the 1990 Amendments to the Clean Air Act. This program is a direct technology spin-off from the valve technology that is critical to the US Navy's Nuclear Powered Fleet. These zero emissions valves will allow the Hydrocarbon and Chemical Processing Industries, etc., to maintain their competitiveness and still meet environmental and safety requirements. Phase 2 is directed at refining the basic technologies developed during Phase 1 so that they can be more readily selected and utilized by the target market. In addition to various necessary certifications, the project will develop a full featured digital controller with ``smart valve'' growth capability, expanding valve sizes/applications and identifying valve materials to permit applications in severe operational environments.

  12. Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 1, Industrial solid waste processing municipal waste reduction/recycling

    Energy Technology Data Exchange (ETDEWEB)

    Lee, V.E. [ed.; Watts, R.L.

    1993-04-01

    This two-volume proceedings summarizes the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  13. Application analysis of solar total energy systems to the residential sector. Volume II, energy requirements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-01

    This project analyzed the application of solar total energy systems to appropriate segments of the residential sector and determined their market penetration potential. This volume covers the work done on energy requirements definition and includes the following: (1) identification of the single-family and multi-family market segments; (2) regionalization of the United States; (3) electrical and thermal load requirements, including time-dependent profiles; (4) effect of conservation measures on energy requirements; and (5) verification of simulated load data with real data.

  14. Evaluation and Ranking of Geothermal Resources for Electrical Generation or Electrical Offset in Idaho, Montana, Oregon and Washington. Volume II.

    Energy Technology Data Exchange (ETDEWEB)

    Bloomquist, R. Gordon

    1985-06-01

    This volume contains appendices on: (1) resource assessment - electrical generation computer results; (2) resource assessment summary - direct use computer results; (3) electrical generation (high temperature) resource assessment computer program listing; (4) direct utilization (low temperature) resource assessment computer program listing; (5) electrical generation computer program CENTPLANT and related documentation; (6) electrical generation computer program WELLHEAD and related documentation; (7) direct utilization computer program HEATPLAN and related documentation; (8) electrical generation ranking computer program GEORANK and related documentation; (9) direct utilization ranking computer program GEORANK and related documentation; and (10) life cycle cost analysis computer program and related documentation. (ACR)

  15. Low-level radioactive waste from commercial nuclear reactors. Volume 1. Recommendations for technology developments with potential to significantly improve low-level radioactive waste management

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, B.R.; Jolley, R.L.

    1986-02-01

    The overall task of this program was to provide an assessment of currently available technology for treating commercial low-level radioactive waste (LLRW), to initiate development of a methodology for choosing one technology for a given application, and to identify research needed to improve current treatment techniques and decision methodology. The resulting report is issued in four volumes. Volume 1 provides an executive summary and a general introduction to the four-volume set, in addition to recommendations for research and development (R and D) for low-level radioactive waste (LLRW) treatment. Generic, long-range, and/or high-risk programs identified and prioritized as needed R and D in the LLRW field include: (1) systems analysis to develop decision methodology; (2) alternative processes for dismantling, decontaminating, and decommissioning; (3) ion exchange; (4) incinerator technology; (5) disposal technology; (6) demonstration of advanced technologies; (7) technical assistance; (8) below regulatory concern materials; (9) mechanical treatment techniques; (10) monitoring and analysis procedures; (11) radical process improvements; (12) physical, chemical, thermal, and biological processes; (13) fundamental chemistry; (14) interim storage; (15) modeling; and (16) information transfer. The several areas are discussed in detail.

  16. Performance Evaluation of Advanced Retrofit Roof Technologies Using Field-Test Data Phase Three Final Report, Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Biswas, Kaushik [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Childs, Phillip W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Atchley, Jerald Allen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-01-01

    This article presents some miscellaneous data from two low-slope and two steep-slope experimental roofs. The low-slope roofs were designed to compare the performance of various roof coatings exposed to natural weatherization. The steep-slope roofs contained different combinations of phase change material, rigid insulation, low emittance surface and above-sheathing ventilation, with standing-seam metal panels on top. The steep-slope roofs were constructed on a series of adjacent attics separated at the gables using thick foam insulation. This article describes phase three (3) of a study that began in 2009 to evaluate the energy benefits of a sustainable re-roofing technology utilizing standing-seam metal roofing panels combined with energy efficient features like above-sheathing-ventilation (ASV), phase change material (PCM) and rigid insulation board. The data from phases 1 and 2 have been previously published and reported [Kosny et al., 2011; Biswas et al., 2011; Biswas and Childs, 2012; Kosny et al., 2012]. Based on previous data analyses and discussions within the research group, additional test roofs were installed in May 2012, to test new configurations and further investigate different components of the dynamic insulation systems. Some experimental data from phase 3 testing from May 2012 to December 2013 and some EnergyPlus modeling results have been reported in volumes 1 and 3, respectively, of the final report [Biswas et al., 2014; Biswas and Bhandari, 2014].

  17. Development of a Hydrologic Characterization Technology for Fault Zones Phase II 2nd Report

    Energy Technology Data Exchange (ETDEWEB)

    Karasaki, Kenzi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Doughty, Christine [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Gasperikova, Erika [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Peterson, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Conrad, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cook, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Tiemi, Onishi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-03-31

    This is the 2nd report on the three-year program of the 2nd phase of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology for Fault Zones under NUMO-DOE/LBNL collaboration agreement. As such, this report is a compendium of the results by Kiho et al. (2011) and those by LBNL.

  18. State of the art HOT performances for Sofradir II-VI extrinsic technologies

    Science.gov (United States)

    Rubaldo, Laurent; Brunner, Alexandre; Guinedor, Pierre; Taalat, Rachid; Sam-giao, Diane; Kerlain, Alexandre; Dargent, Loïc.; Nicolas, Péré-Laprene; Chaffraix, Vincent; Bourqui, Marie-Lise; Loquet, Yannick; Coussement, Jerome

    2016-05-01

    SOFRADIR is the worldwide leader on the cooled IR detector market for high-performance space, military and security applications thanks to a well mastered Mercury Cadmium Telluride (MCT) technology, and recently thanks to the acquisition of III-V technology: InSb, InGaAs, and QWIP quantum detectors. Strong and continuous development efforts are deployed to deliver cutting edge products with improved performances in terms of spatial and thermal resolution, low excess noise and high operability. The actual trend in quantum IR detector development is the design of very small pixel, with high operating temperature. To maintain the detector performances and operability at high temperature, the number of pixels exhibiting extra noise like 1/f and RTS noise must be limited. This paper presents the recent developments achieved in Sofradir in terms of HOT MCT extrinsic p on n technology, blue MW band (cut-off wavelength of 4.2μm at 150K) and extended MW band (cut-off wavelength of 5.3μm at 130K). Comparison between optimized and non-optimized technology will be presented in terms of NETD temperature dependency, MTF, 1/f noise and the corresponding impact on RFPN (Residual Fixe Pattern Noise) and its stability up to 170K will be shown.

  19. Structured assessment approach version 1. License submittal document content and format for material control and accounting assessment. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Parziale, A.A.; Sacks, I.J.

    1979-10-01

    A methodology, the Structured Assessment Approach, has been developed for the assessment of the effectiveness of material control and accounting (MC and A) safeguards systems at nuclear fuel cycle facilities. This methodology has been refined into a computational tool, the SAA Version 1 computational package, that was used first to analyze a hypothetical fuel cycle facility and used more recently to assess operational nuclear plants. The Version 1 analysis package is designed to analyze safeguards systems that prevent the diversion of special nuclear material (SNM) from nuclear fuel cycle facilities and to provide assurance that diversion has not occurred. This report is the second volume, the License Submittal Document Content and Format for Material Control and Accounting Assessment, of a four-volume document. It presents the content and format of the LSD necessary for Material Control and Accounting (MC and A) assessment with the SAA Version 1. The LSD is designed to provide the necessary data input to perform all four stages of analyses associated with the SAA. A full-size but Hypothetical Fuel Cycle Facility (HFCF) is used as an example to illustrate the required input data content and data format and to illustrate the procedure for generating the LSD. Generation of the LSD is the responsibility of the nuclear facility licensee applicant.

  20. SUPPLEMENTARY COMPARISON: COOMET.RI(II)-S1.Rn-222 (169/UA/98): Rn-222 volume activity comparison

    Science.gov (United States)

    Skliarov, V.; Röttger, A.; Honig, A.; Korostin, S.; Kuznetsov, S.; Lapenas, A.; Milevsky, V.; Ivaniukovich, A.; Kharitonov, I.; Sepman, S.

    2009-01-01

    According to a first program, a supplementary comparison of Rn-222 volume activity was drawn up as a bilateral supplementary comparison between NSC 'Institute of Metrology', Ukraine, and VNIIFTRI, Russia. It took place in March 2005. In April 2005, at the 5th meeting of COOMET held in Braunschweig (Germany), representatives of these institutes exchanged data which showed the comparability of the national standards of Ukraine and Russia for the check points. During the discussion of the procedure some other institutes decided to join the comparison program, which was extended to BelGIM (Belarus), PTB (Germany), VNIIM (Russia) and RMTC (Latvia). The national standards of volume activity of radon-222 were thus calibrated using one standard radon radiometer as the transfer standard. Results are shown in the Final Report of the comparison. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by COOMET, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).