WorldWideScience

Sample records for technologies research center

  1. Building Technologies Research and Integration Center (BTRIC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

  2. Advanced Construction Technology Center Research

    Science.gov (United States)

    1993-03-19

    M.S., Ceramic Engineering, May 1989 RESEARCH ASSISTANTS: 1 J.M. Bukowski Ph.D., Ceramic Engineering, August 1993* Hung-Yuan Hsieh M.S., Civil...Parallel Processing (St. Charles , IL, August 1988) 204-211 (1988). 97 U LO, T.M. Data modeling of three-dimensional objects. M.S. thesis, J. Liu, advisor U

  3. Overview of Stirling Technology Research at NASA Glenn Research Center

    Science.gov (United States)

    Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

    2016-01-01

    Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

  4. Armstrong Flight Research Center Research Technology and Engineering Report 2015

    Science.gov (United States)

    Voracek, David F.

    2016-01-01

    I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

  5. National Rehabilitation Hospital Assistive Technology Research Center

    Science.gov (United States)

    1995-10-01

    other researchers would know that ANAM stability in healthy controls may not apply to ANAM performance in brain dysfunctional populations. Should the...Society of Neuroradiology 29th Annual Meeting. Washington DC June 1991. Posterior Sacroiliac Fixation using a Sacropedicular Targeting Device

  6. Massachusetts Institute of Technology, Plasma Fusion Center, Technical Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Ronald C.

    1980-08-01

    A review is given of the technical programs carried out by the Plasma Fusion Center. The major divisions of work areas are applied plasma research, confinement experiments, fusion technology and engineering, and fusion systems. Some objectives and results of each program are described. (MOW)

  7. Research and technology activities at Ames Research Center's Biomedical Research Division

    Science.gov (United States)

    Martello, N.

    1985-01-01

    Various research and technology activities at Ames Research Center's Biomedical Research Division are described. Contributions to the Space Administration's goals in the life sciences include descriptions of research in operational medicine, cardiovascular deconditioning, motion sickness, bone alterations, muscle atrophy, fluid and electrolyte changes, radiation effects and protection, behavior and performance, gravitational biology, and life sciences flight experiments.

  8. Sustainable Technology Research and Demonstration Center for Earth Structures

    Directory of Open Access Journals (Sweden)

    Judy Ueda

    2012-10-01

    Full Text Available This is a discussion paper that the authors presented at the International Workshop on Rammed Earth Materials and Sustainable Structures and Hakka Tulou Forum 2011: Structures of Sustainability, 28–31 October 2011, Xiamen University, China. A Sustainable Technology Research and Demonstration Center for Earth Structures is proposed to study, preserve, advance, promote, and implement rammed earth structures. The Center concept including the objectives, scope of activities and benefits of the proposed center are outlined. The Center for Alternative Technology in Wales, UK has been examined as a good base model along with a few successful environmental sustainability initiatives in China. The funding options to establish the proposed center have been discussed. The breadth of activities ultimately depends on funding capability. It is believed that the proposed center development will require significant government support at the initial stage but once corporate sponsorships are in place, the proposed center will potentially become self-supporting. The strategies, for the establishment of the proposed center are also addressed.

  9. The 1991 research and technology report, Goddard Space Flight Center

    Science.gov (United States)

    Soffen, Gerald (Editor); Ottenstein, Howard (Editor); Montgomery, Harry (Editor); Truszkowski, Walter (Editor); Frost, Kenneth (Editor); Sullivan, Walter (Editor); Boyle, Charles (Editor)

    1991-01-01

    The 1991 Research and Technology Report for Goddard Space Flight Center is presented. Research covered areas such as (1) earth sciences including upper atmosphere, lower atmosphere, oceans, hydrology, and global studies; (2) space sciences including solar studies, planetary studies, Astro-1, gamma ray investigations, and astrophysics; (3) flight projects; (4) engineering including robotics, mechanical engineering, electronics, imaging and optics, thermal and cryogenic studies, and balloons; and (5) ground systems, networks, and communications including data and networks, TDRSS, mission planning and scheduling, and software development and test.

  10. Research and technology, fiscal year 1986, Marshall Space Flight Center

    Science.gov (United States)

    1986-01-01

    The Marshall Space Flight Center is continuing its vigorous efforts in space-related research and technology. Extensive activities in advanced studies have led to the approval of the Orbital Maneuvering Vehicle as a new start. Significant progress was made in definition studies of liquid rocket engine systems for future space transportation needs and the conceptualization of advanced laucnch vehicles. The space systems definition studies have brought the Advanced X-ray Astrophysics Facility and Gravity Probe-B to a high degree of maturity. Both are ready for project implementation. Also discussed include significant advances in low gravity sciences, solar terrestrial physics, high energy astrophysics, atmospheric sciences, propulsion systems, and on the critical element of the Space Shuttle Main Engine in particular. The goals of improving the productivity of high-cost repetitive operations on reusable transportation systems, and extending the useful life of such systems are examined. The research and technology highlighted provides a foundation for progress on the Hubble Space Telescope, the Space Station, all elements of the Space Transportation System, and the many other projects assigned to this Center.

  11. Advanced Stirling Technology Development at NASA Glenn Research Center

    Science.gov (United States)

    Shaltens, Richard K.; Wong, Wayne A.

    2007-01-01

    The NASA Glenn Research Center has been developing advanced energy-conversion technologies for use with both radioisotope power systems and fission surface power systems for many decades. Under NASA's Science Mission Directorate, Planetary Science Theme, Technology Program, Glenn is developing the next generation of advanced Stirling convertors (ASCs) for use in the Department of Energy/Lockheed Martin Advanced Stirling Radioisotope Generator (ASRG). The next-generation power-conversion technologies require high efficiency and high specific power (watts electric per kilogram) to meet future mission requirements to use less of the Department of Energy's plutonium-fueled general-purpose heat source modules and reduce system mass. Important goals include long-life (greater than 14-yr) reliability and scalability so that these systems can be considered for a variety of future applications and missions including outer-planet missions and continual operation on the surface of Mars. This paper provides an update of the history and status of the ASC being developed for Glenn by Sunpower Inc. of Athens, Ohio.

  12. Marshall Space Flight Center Research and Technology Report 2016

    Science.gov (United States)

    Tinker, M. L.; Abney, M. B. (Compiler); Reynolds, D. W. (Compiler); Morris, H. C. (Compiler)

    2017-01-01

    Marshall Space Flight Center is essential to human space exploration and our work is a catalyst for ongoing technological development. As we address the challenges facing human deep space exploration, we advance new technologies and applications here on Earth, expand scientific knowledge and discovery, create new economic opportunities, and continue to lead global space exploration.

  13. Technology Transfer from University-Based Research Centers: The University of New Mexico Experience.

    Science.gov (United States)

    Rogers, Everett M.; Hall, Brad; Hashimoto, Michio; Steffensen, Morten; Speakman, Kristen L.; Timko, Molly K.

    1999-01-01

    A study of 55 research centers at the University of New Mexico investigated the nature of the typical center, why funding has risen during the 1990s, reasons for founding the centers, the director's role, how university-based research centers transfer technology to private companies and other organizations, and what determines program…

  14. Joint research center activity in thermonuclear fusion technology

    Energy Technology Data Exchange (ETDEWEB)

    Casini, G.; Rocco, P. (Commission of the European Communities, Ispra (Italy). Joint Research Centre)

    1984-04-01

    A review of the activities in progress in the field of thermonuclear fusion technology at the Joint Research Centre of the European Communities is presented. The research areas are: (I) reactor studies, including conceptual design studies of experimental Tokamak reactors (INTOR/NET) and safety analyses; (II) experimental investigation on first wall and blanket materials and components. Emphasis has been given to those topics which are not reported in detail in the following articles of the issue.

  15. George C. Marshall Space Flight Center Research and Technology Report 2014

    Science.gov (United States)

    Keys, A. S. (Compiler); Tinker, M. L. (Compiler); Sivak, A. D. (Compiler)

    2015-01-01

    Many of NASA's missions would not be possible if it were not for the investments made in research advancements and technology development efforts. The technologies developed at Marshall Space Flight Center contribute to NASA's strategic array of missions through technology development and accomplishments. The scientists, researchers, and technologists of Marshall Space Flight Center who are working these enabling technology efforts are facilitating NASA's ability to fulfill the ambitious goals of innovation, exploration, and discovery.

  16. Center for Alternative Energy Storage Research and Technology

    Science.gov (United States)

    2013-03-28

    and civilian markets . Research at CAESRT has been directed primarily at Defense Department (Army) applications to provide effective technology...system-level operational strategies . Specifically, CAESRT has conducted interrelated research on: nanostructured battery and capacitor...applications are sensitive to the characteristics of the applications. Often it takes more than 3nS 2pS 4pS 1pS 3pS 2nS 4nS 1Li 3Li 1C 2C 3C 4C 5C 2Li

  17. The Center for Research and Evaluation in the Application of Technology to Education.

    Science.gov (United States)

    Rubin, David P.; Weisgerber, Robert A.

    1985-01-01

    The Center for Research and Development in the Application of Technology to Education project identifies effective uses of new technologies for the learning disabled. Areas investigated include effective instructional design principles, program design strategies, adjusting technology for individual learners, software development, and use of…

  18. Project of space research and technology center in Engelhardt astronomical observatory

    Science.gov (United States)

    Nefedyev, Y.; Gusev, A.; Sherstukov, O.; Kascheev, R.; Zagretdinov, R.

    2012-09-01

    Today on the basis of Engelhardt astronomical observatory (EAO) is created Space research and technology center as consistent with Program for expansion of the Kazan University. The Centre has the following missions: • EDUCATION • SCIENCE • ASTRONOMICAL TOURISM

  19. Marshall Space Flight Center Research and Technology Report 2015

    Science.gov (United States)

    Keys, A. S. (Compiler); Tinker, M. L. (Compiler); Sivak, A. D. (Compiler); Morris, H. C. (Compiler)

    2015-01-01

    The investments in technology development we made in 2015 not only support the Agency's current missions, but they will also enable new missions. Some of these projects will allow us to develop an in-space architecture for human space exploration; Marshall employees are developing and testing cutting-edge propulsion solutions that will propel humans in-space and land them on Mars. Others are working on technologies that could support a deep space habitat, which will be critical to enable humans to live and work in deep space and on other worlds. Still others are maturing technologies that will help new scientific instruments study the outer edge of the universe-instruments that will provide valuable information as we seek to explore the outer planets and search for life.

  20. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  1. JPRS Report, Science & Technology, Japan, Key Tech Center Advanced Communications Research

    Science.gov (United States)

    2007-11-02

    information society . Today, information telecommunication systems are being networked through interconnections, and it is expected that such systems will play a leading role in the future flow of advanced information. Therefore in order to predict future technological developments, it is necessary to elucidate the themes of the development of communication technologies related both to network construction and administration, and to analyze user needs sufficiently. From this perspective, the Key Technology Center initiated its ’Research in Advanced Communications

  2. Military aircraft and missile technology at the Langley Research Center: A selected bibliography

    Science.gov (United States)

    Maddalon, D. V.

    1980-01-01

    A compilation of reference material is presented on the Langley Research Center's efforts in developing advanced military aircraft and missile technology over the past twenty years. Reference material includes research made in aerodynamics, performance, stability, control, stall-spin, propulsion integration, flutter, materials, and structures.

  3. Centering research

    DEFF Research Database (Denmark)

    Katan, Lina Hauge; Baarts, Charlotte

    and collected 24 portfolios in which students reflect auto-ethnographically on their educational practices. Analyzing this qualitative material, we explore how researchers and students respectively read and write to develop and advance their thinking in those learning processes that the two groups fundamentally...... share as the common aim of both research and education. Despite some similarities, we find that how the two groups engage in and benefit from reading and writing diverges significantly. Thus we have even more reason to believe that centering practice-based teaching on these aspects of research is a good...

  4. NASA Lewis Research Center low-gravity fluid management technology program

    Science.gov (United States)

    Aydelott, J. C.; Carney, M. J.; Hochstein, J. I.

    1985-01-01

    A history of the Lewis Research Center in space fluid management technology program is presented. Current programs which include numerical modeling of fluid systems, heat exchanger/radiator concept studies, and the design of the Cryogenic Fluid Management Facility are discussed. Recent analytical and experimental activities performed to support the Shuttle/Centaur development activity are highlighted.

  5. Factors predicting the use of technology: findings from the Center for Research and Education on Aging and Technology Enhancement (CREATE).

    Science.gov (United States)

    Czaja, Sara J; Charness, Neil; Fisk, Arthur D; Hertzog, Christopher; Nair, Sankaran N; Rogers, Wendy A; Sharit, Joseph

    2006-06-01

    The successful adoption of technology is becoming increasingly important to functional independence. The present article reports findings from the Center for Research and Education on Aging and Technology Enhancement (CREATE) on the use of technology among community-dwelling adults. The sample included 1,204 individuals ranging in age from 18-91 years. All participants completed a battery that included measures of demographic characteristics, self-rated health, experience with technology, attitudes toward computers, and component cognitive abilities. Findings indicate that the older adults were less likely than younger adults to use technology in general, computers, and the World Wide Web. The results also indicate that computer anxiety, fluid intelligence, and crystallized intelligence were important predictors of the use of technology. The relationship between age and adoption of technology was mediated by cognitive abilities, computer self-efficacy, and computer anxiety. These findings are discussed in terms of training strategies to promote technology adoption.

  6. Mississippi Technology Transfer Center

    Science.gov (United States)

    1987-01-01

    The Mississippi Technology Transfer Center at the John C. Stennis Space Center in Hancock County, Miss., was officially dedicated in 1987. The center is home to several state agencies as well as the Center For Higher Learning.

  7. "Infotonics Technology Center"

    Energy Technology Data Exchange (ETDEWEB)

    Fritzemeier, L. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Boysel, M. B. [Infotonics Technology Center Inc., Canandaigua, NY (United States); Smith, D. R. [Infotonics Technology Center Inc., Canandaigua, NY (United States)

    2004-09-30

    During this grant period July 15, 2002 thru September 30, 2004, the Infotonics Technology Center developed the critical infrastructure and technical expertise necessary to accelerate the development of sensors, alternative lighting and power sources, and other specific subtopics of interest to Department of Energy. Infotonics fosters collaboration among industry, universities and government and operates as a national center of excellence to drive photonics and microsystems development and commercialization. A main goal of the Center is to establish a unique, world-class research and development facility. A state-of-the-art microsystems prototype and pilot fabrication facility was established to enable rapid commercialization of new products of particular interest to DOE. The Center has three primary areas of photonics and microsystems competency: device research and engineering, packaging and assembly, and prototype and pilot-scale fabrication. Center activities focused on next generation optical communication networks, advanced imaging and information sensors and systems, micro-fluidic systems, assembly and packaging technologies, and biochemical sensors. With targeted research programs guided by the wealth of expertise of Infotonics business and scientific staff, the fabrication and packaging facility supports and accelerates innovative technology development of special interest to DOE in support of its mission and strategic defense, energy, and science goals.

  8. Completion of Green Building by Korea Institute of Energy Research - Energy{center_dot}Conservation{center_dot}Environmental Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Dong [Korea Institute of Energy Research, Taejon (Korea)

    2001-04-01

    Korea Institute of Energy Research (KIER), which was fully aware that the effective utilization of energy could not only save energy but also reduce the environmental pollution due to a combustion exhaust gas, has built and operated 'the Ultra Energy Saving Building' whose energy consumption was only a fifth of general buildings as a example. KIER has started to research the project for the technology development and spread of Green Building in 'Enertech 21' - the most important research program of 1994 year - and has constructed the central building of the Institute with only the current available technology since the early of 1997 year, via researches by a step. Finally, KIER held the ceremony for the completion of Green Building in March sixth. This building is not just the first green building in Korea but also the representative building of energy environment research center, which will be marked out for a model for the domestic construction and construction industry in future. Therefore, this building has functions of exhibition, publicity, education, and experimentation for the building researchers as well as the office and researching place that is original function of this building. 4 figs., 5 tabs.

  9. Research Center for Optical Physics: Education and Technology for the 21st Century

    Science.gov (United States)

    2003-01-01

    During the past eleven years since its inception, RCOP has excelled in its two primary goals: 1) training of the scientists and engineers needed for the twenty-first century with special emphasis on underrepresented citizens and 2) research and technological development in areas of relevance to NASA. In the category of research training, as of May 2003, RCOP produced 36 Bachelors degrees, 25 Masters degrees, and 13 Doctoral degrees. Of these, all 36 Bachelors degrees, 16 of the Masters degrees and 9 of the Doctoral degrees were awarded to African Americans. Four of the Doctoral graduates and one of the Masters graduates are working at NASA Field Centers. RCOP has also provided research experiences to 130 undergraduate students and 22 high school students through a number of outreach programs held during the summer and the academic year. RCOP has also been crucial to the development of the Ph.D. program in physics at Hampton University by providing high quality research training and technical electives required for a Doctoral degree in physics. RCOP has also excelled in research and technological development. Since 1992, RCOP researchers have leveraged over 8 million dollars in additional research funding, published 152 papers in refereed journals and proceedings, and given 125 presentations at refereed international conferences in the United States and eight other countries. RCOP also developed numerous collaborations with other research centers, universities and industries. In recognition of this outstanding work, RCOP is the first research center in the United States invited to join the Joint Open Laboratory for Laser Crystals and Precise Laser Systems headed by Dr. Alexander Kaminiskii of the Russian Academy of Sciences.

  10. Electric Power Research Institute Environmental Control Technology Center Report to the Steering Committee

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1998-01-12

    Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC). Testing for the month involved the Dry Sorbent Injection (DSI) test block with the Carbon Injection System. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit, the 0.4 MW Mini-Pilot Wet Scrubber, and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. These units remain available for testing as future project work is identified.

  11. The World Wide Web and Technology Transfer at NASA Langley Research Center

    Science.gov (United States)

    Nelson, Michael L.; Bianco, David J.

    1994-01-01

    NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of the WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. During its first year on the Web, LaRC also developed several WWW-based information repositories. The Langley Technical Report Server (LTRS), a technical paper delivery system with integrated searching and retrieval, has proved to be quite popular. The NASA Technical Report Server (NTRS), an outgrowth of LTRS, provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software with the possible phase-out of NASA's COSMIC program. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people. With the completion of the LaRC reorganization, the Technology Applications Group, charged with interfacing with non-aerospace companies, opened for business with a popular home page.

  12. Radiation technology facilities operating at the italian ENEA-Casaccia research center

    Energy Technology Data Exchange (ETDEWEB)

    Tata, A.; Festinesi, A.; Rosa, R. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Innovazione

    1998-04-01

    The ENEA Casaccia Research Center, 20 km far from Rome, is the main Italian technological research Center, with more than 2000 scientists involved in several advanced research fields (materials, energy, environment, etc.). Within the frame of radiation technology, three main facilities are in service at full power at the Casaccia research Center: a 1 MW TRIGA Mark II reactor (RC-1); a 5 kW fast source reactor (TAPIRO); a 3.7 x 10{sup 15} Bq Cobalt-60 irradiation plant (CALLIOPE). Main R-D programmes carried out regard medical radioisotopes and radio trackers production, neutron radiography, neutron activation analysis, radiation damage analysis, neutron diffractometry, foodstuffs treatment, crosslinking processes, wastes (hazardous, chemical, hospital) processing. The paper provides a features description of utilized facilities and reports main present carried out projects. [Italiano] Il Centro Ricerca ENEA della casaccia, situato a 20 km circa da Roma, e` il maggiore centro di ricerca tecnologica italiano, con oltre 2000 ricercatori impegnati in numerosi campi di ricerca avanzata (materiali, energia, ambiente, etc.). Nell`ambito delle tecnologie di irraggiamento, sono presenti e pienamente funzionanti presso il C.R. Casaccia tre principali impianti: un reattore termico TRIGA mark II da 1 MW (RC-1); un reattore-sorgente veloce da 5 kW (TAPIRO); un impianto di irraggiamento a Cobalto-60 da 3.7. x 10{sup 15} Bq (CALLIOPE). I principali programmi R-D condotti riguardano la produzione di radioisotopi e radiotraccianti di utilizzo in campo medico, la radiografia neutronica, l`analisi per attivazione neutronica, l`analisi del danno da radiazioni, la diffrattometria neutronica, il trattamento di derrate alimentari, i processi di reticolazione polimerica, il trattamento di rifiuti (tossico-nocivi, chimici, ospedaliri). Il presente lavoro fornisce una descrizione tecnica degli impianti, nonche` indicazioni sui principali programmo condotti attualmente presso tali impienti.

  13. Earth System Grid Center for Enabling Technologies: Building a Global Infrastructure for Climate Change Research

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ahrens, J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ananthakrishnan, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Bell, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bharathi, S. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Brown, D. [National Center for Atmospheric Reserch, Boulder, CO (United States); Chen, M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chervenak, A. L. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Cinquini, L. [National Aeronautics and Space Administration, Pasadena, CA (United States); Drach, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, I. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Fox, P. [Rensselaer Polytechnic Inst., Troy, NY (United States); Hankin, S. [National Oceanic and Atmospheric Administration (PMEL), Seattle, WA (United States); Harper, D. [National Center for Atmospheric Reserch, Boulder, CO (United States); Hook, N. [National Center for Atmospheric Reserch, Boulder, CO (United States); Jones, P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Middleton, D. E. [National Center for Atmospheric Reserch, Boulder, CO (United States); Miller, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nienhouse, E. [National Center for Atmospheric Reserch, Boulder, CO (United States); Schweitzer, R. [National Oceanic and Atmospheric Administration (PMEL), Seattle, WA (United States); Schuler, R. [Univ. of Southern California, Marina del Ray, CA (United States). Information Science Institute; Shipman, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shoshani, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Siebenlist, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Sim, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Strand, W. G. [National Center for Atmospheric Reserch, Boulder, CO (United States); Wang, F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilcox, H. [National Center for Atmospheric Reserch, Boulder, CO (United States); Wilhelmi, N. [National Center for Atmospheric Reserch, Boulder, CO (United States)

    2010-08-16

    Established within DOE’s Scientific Discovery through Advanced Computing (SciDAC-) 2 program, with support from ASCR and BER, the Earth System Grid Center for Enabling Technologies (ESG-CET) is a consortium of seven laboratories (Argonne National Laboratory [ANL], Los Alamos National Laboratory [LANL], Lawrence Berkeley National Laboratory [LBNL], Lawrence Livermore National Laboratory [LLNL], National Center for Atmospheric Research [NCAR], Oak Ridge National Laboratory [ORNL], and Pacific Marine Environmental Laboratory [PMEL]), and two institutes (Rensselaer Polytechnic Institute [RPI] and the University of Southern California, Information Sciences Institute [USC/ISI]). The consortium’s mission is to provide climate researchers worldwide with a science gateway to access data, information, models, analysis tools, and computational capabilities required to evaluate extreme-scale data sets. Its stated goals are to (1) make data more useful to climate researchers by developing collaborative technology that enhances data usability; (2) meet the specific needs that national and international climate projects have for distributed databases, data access, and data movement; (3) provide a universal and secure web-based data access portal for broad-based multi-model data collections; and (4) provide a wide range of climate data-analysis tools and diagnostic methods to international climate centers and U.S. government agencies. To this end, the ESG-CET is working to integrate all highly publicized climate data sets—from climate simulations to observations—using distributed storage management, remote high-performance units, high-bandwidth wide-area networks, and user desktop platforms in a collaborative problem-solving environment.

  14. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Aeronautics Research Mission Directorate Projects at NASA Glenn Research Center for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.; Morris, Jessica R.

    2015-01-01

    This document is intended to enable the more effective transition of NASA Glenn Research Center (GRC) SBIR technologies funded by the Small Business Innovation Research (SBIR) program as well as its companion, the Small Business Technology Transfer (STTR) program into NASA Aeronautics Research Mission Directorate (ARMD) projects. Primarily, it is intended to help NASA program and project managers find useful technologies that have undergone extensive research and development (RRD), through Phase II of the SBIR program; however, it can also assist non-NASA agencies and commercial companies in this process. aviation safety, unmanned aircraft, ground and flight test technique, low emissions, quiet performance, rotorcraft

  15. The 1994 research and technology report at the Goddard Space Flight Center

    Science.gov (United States)

    Soffen, Gerald (Editor); Halem, Milton (Editor); Green, James (Editor); Frost, Kenneth (Editor); Maran, Stephen (Editor); Boyle, Charles (Editor); Truszlowski, Walter (Editor); Sullivan, Walter (Editor); Ottenstein, Howard (Editor)

    1994-01-01

    The breadth of subject material in this 1994 edition of the Research and Technology Report illustrates the broad scope of activities at the Goddard Space Flight Center. The numerous entries dealing with data processing and visualization show the strong emphasis on data and its interpretation. Reports are presented in the following sections: data processing and visualization; space sciences - high energy astronomy, solar system, and new techniques; earth system science - atmospheres, oceans and ice, solid earth, and soils and vegetation; networks, planning, and information systems - mission scheduling and operations, spacecraft operation and status, software engineering, and infrastructure support; engineering and materials - spacecraft subsystems, launch vehicles, thermal control, new mechanisms, and testing and evaluation; and flight projects.

  16. Electric Power Research Institute, Environmental Control Technology Center monthly report to the Steering Committee, June 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-11-02

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot FGD unit continued this month with High Velocity Scrubbing and the Tampa Electric Company (TECO) Tailored Collaboration test block. Additionally, Phase III of the Toxics Removal/Carbon Injection test block was conducted concurrently with FGD testing. At the beginning of the month, a second phase of third-party testing began for Suncor, Inc. The Suncor Gypsum Sample Collection test block (MSUN) began on June 5 on the 0.4 MW Mini-Pilot Wet FGD unit. Testing was completed on June 13. On the Cold-Side Selective Catalytic Reduction (SCR) unit, testing continued this month as ammonia slip measurements were conducted under low catalyst inlet temperatures and at baseline conditions.

  17. Current Development of Nuclear Thermal Propulsion technologies at the Center for Space Nuclear Research

    Energy Technology Data Exchange (ETDEWEB)

    Robert C. O' Brien; Steven K. Cook; Nathan D. Jerred; Steven D. Howe; Ronald Samborsky; Daniel Brasuell

    2012-09-01

    Nuclear power and propulsion has been considered for space applications since the 1950s. Between 1955 and 1972 the US built and tested over twenty nuclear reactors / rocket engines in the Rover/NERVA programs1. The Aerojet Corporation was the prime contractor for the NERVA program. Modern changes in environmental laws present challenges for the redevelopment of the nuclear rocket. Recent advances in fuel fabrication and testing options indicate that a nuclear rocket with a fuel composition that is significantly different from those of the NERVA project can be engineered; this may be needed to ensure public support and compliance with safety requirements. The Center for Space Nuclear Research (CSNR) is pursuing a number of technologies, modeling and testing processes to further the development of safe, practical and affordable nuclear thermal propulsion systems.

  18. Solar Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Bob

    2011-04-27

    The Department of Energy, Golden Field Office, awarded a grant to the UNLV Research Foundation (UNLVRF) on August 1, 2005 to develop a solar and renewable energy information center. The Solar Technology Center (STC) is to be developed in two phases, with Phase I consisting of all activities necessary to determine feasibility of the project, including design and engineering, identification of land access issues and permitting necessary to determine project viability without permanently disturbing the project site, and completion of a National Environmental Policy Act (NEPA) Environmental Assessment. Phase II is the installation of infrastructure and related structures, which leads to commencement of operations of the STC. The STC is located in the Boulder City designated 3,000-acre Eldorado Valley Energy Zone, approximately 15 miles southwest of downtown Boulder City and fronting on Eldorado Valley Drive. The 33-acre vacant parcel has been leased to the Nevada Test Site Development Corporation (NTSDC) by Boulder City to accommodate a planned facility that will be synergistic with present and planned energy projects in the Zone. The parcel will be developed by the UNLVRF. The NTSDC is the economic development arm of the UNLVRF. UNLVRF will be the entity responsible for overseeing the lease and the development project to assure compliance with the lease stipulations established by Boulder City. The STC will be operated and maintained by University of Nevada, Las Vegas (UNLV) and its Center for Energy Research (UNLV-CER). Land parcels in the Eldorado Valley Energy Zone near the 33-acre lease are committed to the construction and operation of an electrical grid connected solar energy production facility. Other projects supporting renewable and solar technologies have been developed within the energy zone, with several more developments in the horizon.

  19. Student Use of Communication Technologies--Parent/Guardian Survey Report. Survey Research Center Report 2010/8

    Science.gov (United States)

    Julka, Ashley; Stehr, Grady; Parks, Denise; Trechter, David

    2010-01-01

    The purpose of this study was to gain a better understanding of how middle school students and their parents are using technologies and what programs citizens of Wisconsin might need with respect to these technologies. During the month of February 2010, staff from the Survey Research Center (SRC) at the University of Wisconsin-River Falls, Lori…

  20. Recent Stirling Conversion Technology Developments and Operational Measurements at NASA Glenn Research Center

    Science.gov (United States)

    Oriti, Salvatore M.; Schifer, Nicholas A.

    2010-01-01

    In support of the Advanced Stirling Radioisotope Generator (ASRG) project and other potential applications, NASA Glenn Research Center (GRC) has initiated convertor technology development efforts in the areas of acoustic emission, electromagnetic field mitigation, thermoacoustic Stirling conversion, and multiple-cylinder alpha arrangements of Stirling machines. The acoustic emission measurement effort was developed as a health monitoring metric for several Stirling convertors undergoing life testing. While accelerometers have been used in the past to monitor dynamic signature, the acoustic sensors were chosen to monitor cycle events, such gas bearing operation. Several electromagnetic interference (EMI) experiments were performed on a pair of Advanced Stirling Convertors (ASC). These tests demonstrated that a simple bucking coil was capable of reducing the alternating current (ac) magnetic field below the ASRG system specification. The thermoacoustic Stirling concept eliminates the displacer typically found in Stirling machines by making use of the pressure oscillations of a traveling acoustic wave. A 100 W-class thermoacoustic Stirling prototype manufactured by Northrop Grumman Space and Technology was received and tested. Another thermoacoustic prototype designed and fabricated by Sunpower, Inc., will be tested in the near future. A four cylinder free piston alpha prototype convertor was received from Sunpower, Inc. and has been tested at GRC. This hardware was used as a proof of concept to validate thermodynamic models and demonstrate stable operation of multiple-cylinder free-piston Stirling conversion. This paper will discuss each of these activities and the results they produced.

  1. Telemedicine & Advanced Technology Research Center (TATRC) Overview: Research Shaped to Meet Military Needs

    Science.gov (United States)

    2011-06-01

    Technology BHSAI Medical Modeling & Simulation JPC Program Execution National ProgramsLogistics Security, Plans, Training, Travel Innovative and...SBIR CSI 400 450 Demonstrations & Field T-Med (P8) JPC -1 Other JPC Execution 5 6 & 8 300 350 Demonstrations , , , 200 250 & Field T-Med (P8...Other JPC Execution 100 150 Congressional Special Appropriations – RDT&E 0 50 SBIR JPC1 UNCLASSIFIED June 2011 Key Sources: CSI, AAMTI(P8), SBIR/STTR

  2. Recent Efforts in Communications Research and Technology at the Glenn Research Center in Support of NASA's Mission

    Science.gov (United States)

    Miranda, Felix A.

    2015-01-01

    As it has done in the past, NASA is currently engaged in furthering the frontiers of space and planetary exploration. The effectiveness in gathering the desired science data in the amount and quality required to perform this pioneering work relies heavily on the communications capabilities of the spacecraft and space platforms being considered to enable future missions. Accordingly, the continuous improvement and development of radiofrequency and optical communications systems are fundamental to prevent communications to become the limiting factor for space explorations. This presentation will discuss some of the research and technology development efforts currently underway at the NASA Glenn Research Center in the radio frequency (RF) and Optical Communications. Examples of work conducted in-house and also in collaboration with academia, industry, and other government agencies (OGA) in areas such as antenna technology, power amplifiers, radio frequency (RF) wave propagation through Earths atmosphere, ultra-sensitive receivers, thin films ferroelectric-based tunable components, among others, will be presented. In addition, the role of these and other related RF technologies in enabling the NASA next generation space communications architecture will be also discussed.

  3. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Science Mission Directorate Projects at Glenn Research Center for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2016-01-01

    This report is intended to help NASA program and project managers incorporate Glenn ResearchCenter Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR)technologies into NASA Science Mission Directorate (SMD) programs/projects. Other Government and commercial project managers can also find this useful.

  4. Rotary-Wing Relevant Compressor Aero Research and Technology Development Activities at Glenn Research Center

    Science.gov (United States)

    Welch, Gerard E.; Hathaway, Michael D.; Skoch, Gary J.; Snyder, Christopher A.

    2012-01-01

    Technical challenges of compressors for future rotorcraft engines are driven by engine-level and component-level requirements. Cycle analyses are used to highlight the engine-level challenges for 3000, 7500, and 12000 SHP-class engines, which include retention of performance and stability margin at low corrected flows, and matching compressor type, axial-flow or centrifugal, to the low corrected flows and high temperatures in the aft stages. At the component level: power-to-weight and efficiency requirements impel designs with lower inherent aerodynamic stability margin; and, optimum engine overall pressure ratios lead to small blade heights and the associated challenges of scale, particularly increased clearance-to-span ratios. The technical challenges associated with the aerodynamics of low corrected flows and stability management impel the compressor aero research and development efforts reviewed herein. These activities include development of simple models for clearance sensitivities to improve cycle calculations, full-annulus, unsteady Navier-Stokes simulations used to elucidate stall, its inception, and the physics of stall control by discrete tip-injection, development of an actuator-duct-based model for rapid simulation of nonaxisymmetric flow fields (e.g., due inlet circumferential distortion), advanced centrifugal compressor stage development and experimentation, and application of stall control in a T700 engine.

  5. Concurrent engineering research center

    Science.gov (United States)

    Callahan, John R.

    1995-01-01

    The projects undertaken by The Concurrent Engineering Research Center (CERC) at West Virginia University are reported and summarized. CERC's participation in the Department of Defense's Defense Advanced Research Project relating to technology needed to improve the product development process is described, particularly in the area of advanced weapon systems. The efforts committed to improving collaboration among the diverse and distributed health care providers are reported, along with the research activities for NASA in Independent Software Verification and Validation. CERC also takes part in the electronic respirator certification initiated by The National Institute for Occupational Safety and Health, as well as in the efforts to find a solution to the problem of producing environment-friendly end-products for product developers worldwide. The 3M Fiber Metal Matrix Composite Model Factory Program is discussed. CERC technologies, facilities,and personnel-related issues are described, along with its library and technical services and recent publications.

  6. NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners. With specialized teams, TTC guides the interactions of our partners from the point of discovery to patenting, from invention development to licensing. We play a key role in helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class researchers, facilities, and knowledge.

  7. Morgantown Energy Technology Center, technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

  8. Economic Development Activities at the Young - Rainey Science, Technology, & Research (STAR) Center

    Energy Technology Data Exchange (ETDEWEB)

    Paul S. Sacco; Carl Smeigh; John Caponiti, Jr.

    2008-06-30

    Project mission was to mitigate the adverse economic effects of closing the U.S. Department of Energy's Pinellas Plant in Largo, Florida. This project was to facilitate the physical renovation of the plant and to help maintain and create jobs for the employees that worked at the plant when DOE terminated its operations. It also included finding and attracting high technology, industrial manufacturing and related firms to utilize the space and high tech equipment to remain at the plant. Stakeholders included the affected plant employees, local government and related public organizations, and businesses and universities in the Tampa Bay Florida area. The $17.6 million funded for this project helped produce 2,780 jobs at the Young - Rainey STAR Center at an average cost of $6,328. Rental income from STAR Center tenants and third party cash input amounted to approximately $66 million over the project period of 13.3 years.

  9. Geothermal Research at the Geo-Heat Center Oregon Institute of Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lund, John W.

    1997-01-01

    The Geo-Heat Center was established in 1975 to provide information and technical services for geothermal energy direct-use and development--mainly utilizing low- and moderate-temperature resources (<150oC). The Center is funded by the Geothermal Division of the U.S. Department of Energy (USDOE). Our main functions are (1) technical assistance, (2) resource information, (3) advising and referrals, (4) speaker’s bureau, (5) tours of geothermal systems, (6) publications, (7) research, and (8) stocking a geothermal library. During 1997, the Geo-Heat Center staff provided assistance to 761 individuals, companies and municipalities--up to eight hours of technical assistance can be provided free of charge. Staff members have also participated in numerous international geothermal direct-use projects. The Center has developed a “Geothermal Direct Use Engineering and Design Guidebook” and publishes a free “Quarterly Bulletin” on geothermal direct-use projects and research. The Geo-Heat Center also has a website (http://www.oit.edu/~geoheat). Several of these direct-use research projects are discussed in the paper, including: a) Downhole Heat Exchangers, b) A Cost Comparison of Commercial Ground- Source Heat Pump Systems, c) A Spreadsheet for Geothermal Energy Cost Evaluation, d) Utilization of Silica Waste from Geothermal Power Production, e) Fossil Fuel-Fired Peak Heating for Geothermal Greenhouses, f) Selected Cost Considerations for the Geothermal District Heating in Existing Single-Family Residential Areas, and g) Collocated Resources Inventory of Wells and Hot Springs in the Western U.S.

  10. Informing Science (IS and Science and Technology Studies (STS: The University as Decision Center (DC for Teaching Interdisciplinary Research

    Directory of Open Access Journals (Sweden)

    Teresa Castelao-Lawless

    2001-01-01

    Full Text Available Students of history and philosophy of science courses at my University are either naïve robust realists or naïve relativists in relation to science and technology. The first group absorbs from culture stereotypical conceptions, such as the value-free character of the scientific method, that science and technology are impervious to history or ideology, and that science and religion are always at odds. The second believes science and technology were selected arbitrarily by ideologues to have privileged world views of reality to the detriment of other interpretations. These deterministic outlooks must be challenged to make students aware of the social importance of their future roles, be they as scientists and engineers or as science and technology policy decision makers. The University as Decision Center (DC not only reproduces the social by teaching standard solutions to well-defined problems but also provides information regarding conflict resolution and the epistemological, individual, historical, social, and political mechanisms that help create new science and technology. Interdisciplinary research prepares students for roles that require science and technology literacy, but raises methodological issues in the context of the classroom as it increases uncertainty with respect to apparently self-evident beliefs about scientific and technological practices.

  11. Savannah River Technology Center, monthly report

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This is the monthly report to detail the research currently being conducted at the Savannah River Technology Center. The areas of research are in Tritium, Seperation processes, Environmental Engineering, and Waste Management.

  12. Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Human Exploration and Operations Mission Directorate Projects at Glenn Research Center for 2015

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2016-01-01

    This report is intended to help NASA program and project managers incorporate Glenn Research Center Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR) technologies into NASA Human Exploration and Operations Mission Directorate (HEOMD) programs and projects. Other Government and commercial project managers can also find this useful. Introduction Incorporating Small Business Innovation Research (SBIR)-developed technology into NASA projects is important, especially given the Agency's limited resources for technology development. The SBIR program's original intention was for technologies that had completed Phase II to be ready for integration into NASA programs, however, in many cases there is a gap between Technology Readiness Levels (TRLs) 5 and 6 that needs to be closed. After SBIR Phase II projects are completed, the technology is evaluated against various parameters and a TRL rating is assigned. Most programs tend to adopt more mature technologies-at least TRL 6 to reduce the risk to the mission rather than adopt TRLs between 3 and 5 because those technologies are perceived as too risky. The gap between TRLs 5 and 6 is often called the "Valley of Death" (Figure 1), and historically it has been difficult to close because of a lack of funding support from programs. Several papers have already suggested remedies on how to close the gap (Refs. 1 to 4).

  13. Antenna Technology and other Radio Frequency (RF) Communications Activities at the Glenn Research Center in Support of NASA's Exploration Vision

    Science.gov (United States)

    Miranda, Felix A.

    2007-01-01

    NASA s Vision for Space Exploration outlines a very ambitious program for the next several decades of the Space Agency endeavors. Ahead is the completion of the International Space Station (ISS); safely flight the shuttle (STS) until 2010; develop and fly the Crew Exploration Vehicle (Orion) by no later than 2014; return to the moon by no later than 2020; extend human presence across the solar system and beyond; implement a sustainable and affordable human and robotic program; develop supporting innovative technologies, knowledge and infrastructure; and promote international and commercial participation in exploration. To achieve these goals, a series of enabling technologies must be developed or matured in a timely manner. Some of these technologies are: spacecraft RF technology (e.g., high power sources and large antennas which using surface receive arrays can get up to 1 Gbps from Mars), uplink arraying (reduce reliance on large ground-based antennas and high operation costs; single point of failure; enable greater data-rates or greater effective distance; scalable, evolvable, flexible scheduling), software define radio (i.e., reconfigurable, flexible interoperability allows for in flight updates open architecture; reduces mass, power, volume), and optical communications (high capacity communications with low mass/power required; significantly increases data rates for deep space). This presentation will discuss some of the work being performed at the NASA Glenn Research Center, Cleveland, Ohio, in antenna technology as well as other on-going RF communications efforts.

  14. Center for Advanced Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, Rick

    2013-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, CAST is now a five-university consortium – Virginia Tech, West Virginia University, University of Kentucky, University of Utah and Montana Tech, - that is supported through U.S. DOE Cooperative Agreement No. DE-FE0000699, Center for Advanced Separation Technology. Much of the research to be conducted with Cooperative Agreement funds will be longer term, high-risk, basic research and will be carried out in two broad areas: Advanced Pre-Combustion Clean Coal Technologies and Gas-Gas Separations. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the five member universities. These were reviewed and the selected proposals were forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed below by category, along with abstracts from their final reports.

  15. Hazardous Waste Research Center

    Data.gov (United States)

    Federal Laboratory Consortium — A full-service research and evaluation center equipped with safety equipment, a high-bay pilot studies area, and a large-scale pilot studies facility The U.S. Army...

  16. Naval Surface Warfare Center Technical Digest. Research and Technology - Shaping Future Naval Systems

    Science.gov (United States)

    1991-09-01

    on the three-trillion- and to foster cooperation. dollar national debt, it is very likely that the 0 There will be an increased requirement todefense...sophisticated multimode guidance, and "smart" countermeasures are but a few of the weapon features which technology advances are already foster - ing...meet costo . sthedule, and rapid obsolescence due to technological ad- c ho i:al perto~rnman2e objectives. ’ vances. All these factors, along with

  17. The Role of Digital Technologies in Deeper Learning. Students at the Center: Deeper Learning Research Series

    Science.gov (United States)

    Dede, Chris

    2014-01-01

    To compete in today's global, knowledge-based, innovation-centered economy, young people must go beyond a high school diploma and acquire not just academic knowledge, but interpersonal and interpersonal capacities. That is, they must engage in deeper learning. As schools shift away from traditional education models in favor or providing deeper…

  18. 75 FR 14128 - Center for Nanoscale Science and Technology Postdoctoral Researcher and Visiting Fellow...

    Science.gov (United States)

    2010-03-24

    ... regarding the use of human embryonic stem cells in research. On July 30, 2009, President Obama issued a memorandum directing that agencies that support and conduct stem cell research adopt the ``National Institutes of Health Guidelines for Human Stem Cell Research'' (NIH Guidelines), which became effective on...

  19. Oncotyrol--Center for Personalized Cancer Medicine: Methods and Applications of Health Technology Assessment and Outcomes Research.

    Science.gov (United States)

    Siebert, Uwe; Jahn, Beate; Rochau, Ursula; Schnell-Inderst, Petra; Kisser, Agnes; Hunger, Theresa; Sroczynski, Gaby; Mühlberger, Nikolai; Willenbacher, Wolfgang; Schnaiter, Simon; Endel, Gottfried; Huber, Lukas; Gastl, Guenther

    2015-01-01

    The Oncotyrol - Center for Personalized Cancer Medicine is an international and interdisciplinary alliance combining research and commercial competencies to accelerate the development, evaluation and translation of personalized healthcare strategies in cancer. The philosophy of Oncotyrol is to collaborate with relevant stakeholders and advance knowledge "from bench to bedside to population and back". Oncotyrol is funded through the COMET Excellence Program by the Austrian government via the national Austrian Research Promotion Agency (FFG). This article focuses on the role of health technology assessment (HTA) and outcomes research in personalized cancer medicine in the context of Oncotyrol. Oncotyrol, which currently comprises approximately 20 individual projects, has four research areas: Area 1: Biomarker and Drug Target Identification; Area 2: Assay Development and Drug Screening; Area 3: Innovative Therapies; Area 4: Health Technology Assessment and Bioinformatics. Area 4 translates the results from Areas 1 to 3 to populations and society and reports them back to Area 3 to inform clinical studies and guidelines, and to Areas 1 and 2 to guide further research and development. In a series of international expert workshops, the Oncotyrol International Expert Task Force for Personalized Cancer Medicine developed the Methodological Framework for Early Health Technology Assessment and Decision Modeling in Cancer and practical guidelines in this field. Further projects included applications in the fields of sequential treatment of patients with chronic myeloid leukemia (CML), benefit-harm and cost-effectiveness evaluation of prostate cancer screening, effectiveness and cost-effectiveness of multiple cervical cancer screening strategies, and benefits and cost-effectiveness of genomic test-based treatment strategies in breast cancer. An interdisciplinary setting as generated in Oncotyrol provides unique opportunities such as systematically coordinating lab and bench

  20. Electric Power Research Institute: Environmental Control Technology Center. Report to the Steering Committee, February 1996. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued this month with the Carbon Injection System and the Trace Element Removal test blocks. With this testing, the mercury measurement (Method 29) studies also continued with impinger capture solutions. The 4.0 MW Spray Dryer Absorber System (Carbon Injection System) was utilized in the TER test configuration this month. The B&W/CHX Heat Exchanger unit is being installed utilizing the Mini Pilot Flue Gas System. The 1.0 MW Cold- Side Selective Catalytic Reduction (SCR) unit remained idle this month in a cold-standby mode. Monthly inspections were conducted for all equipment in cold-standby, as well as for the fire safety systems, and will continue to be conducted by the ECTC Operations and Maintenance staff.

  1. Join TTC! | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) offers a unique opportunity for training through the NCI TTC Fellowship program. TTC also has a unit dedicated to marketing these research opportunities and their underlying technologies to potential collaborators and licensees. | [google6f4cd5334ac394ab.html

  2. Assistance Technology Research Center

    Science.gov (United States)

    2003-02-01

    remotely position the camera ( pan -tilt) and capture video segments. The system can be rolled to any environment where the clinician wants to record...Specifically, this group is interested in exploring cerebro -cerebellar circuitry as it relates to concussion symptomology. This year, Dr. Bleiberg visited...mobile unit (with a 15" flat panel video monitor, an electronic Pan - Tilt-Zoom camera, and a rechargeable power supply with over hours of run-time

  3. Food safety intervention research at the Eastern Regional Research Center: innovative sanitizers, natural antimicrobials and nonthermal processing technologies

    Science.gov (United States)

    Foodborne pathogens such as Salmonella, Listeria monocytogenes and Escherichia coli O157:H7cause millions of illnesses every year. A variety of technologies have been advanced in recent years to expand on the suite of tools available to food processors. At the US Department of Agriculture’s Eastern ...

  4. About TTC | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute’s Technology Transfer Center (TTC) facilitates partnerships between the NIH research laboratories and external partners, and helping to accelerate development of cutting-edge research by connecting our partners to NIH’s world-class facilities, resources, and discoveries. Contact us to learn more. | [google6f4cd5334ac394ab.html

  5. 2017 Technology Showcase | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The 2017 Technology Showcase is an inaugural, half-day event that will showcase technologies developed by the National Cancer Institute's Center for Cancer Research (CCR) and the Frederick National Laboratory for Cancer Research (FNLCR). The goal of the Showcase is to encourage startup company formation, technology licensing, and public-private collaborations. It will introduce the Frederick community to the regional technology development stakeholders, as well as highlight available resources. WHO SHOULD ATTEND: Prospective investors, established companies, educators, those looking to commercialize technologies, and all interested stakeholders. | [google6f4cd5334ac394ab.html

  6. Electric Power Research Institute: Environmental Control Technology Center report to the Steering Committee. Final technical monthly report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued this month with the Trace Element Removal test block (TER) as the Pilot was operated under forced oxidation conditions. With this testing, the mercury measurement (Method 29) studies also continued as investigations into various activated carbons, metal amalgams, and impinger capture solutions were conducted. Following these studies, a brief test of the Pilot High Velocity FGD configuration (PHV) was conducted. This test block will be continued at the end of the month after the Fall outage is completed. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit remained idle this month in a cold-standby mode. During this month`s outage, the inlet and outlet damper plates were sealed to isolate the SCR system from flue gas. Also, the internals of the heat pipe heat exchanger (HPHE) and catalyst reactor tower were inspected and cleaned so that the system could be available for future test activities. Monthly inspections of all SCR system equipment placed in this cold-standby mode, as well as the fire safety systems in the SCR building, will continue to be conducted by the ECTC maintenance department and will include manual rotation of the booster fan.

  7. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-10-31

    The Deactivation and Decommissioning (D&D) Technology Assessment Program (TAP) was developed to provide detailed, comparable data for environmental technologies and to disseminate this data to D&D professionals in a manner that will facilitate the review and selection of technologies to perform decontamination and decommissioning. The objectives for this project include the following: Determine technology needs through review of the Site Technology Coordination Group (STCG) information and other applicable websites and needs databases; Perform a detailed review of industries that perform similar activities as those required in D&D operations to identify additional technologies; Define the technology assessment program for characterization and waste management problem sets; Define the data management program for characterization, dismantlement, and waste management problem sets; Evaluate baseline and innovative technologies under standard test conditions at Florida International University's Hemispheric Center for Environmental Technology (FIU-HCET) and other locations and collect data in the areas of performance, cost, health and safety, operations and maintenance, and primary and secondary waste generation; Continue to locate, verify, and incorporate technology performance data from other sources into the multimedia information system; and Develop the conceptual design for a dismantlement technology decision analysis tool for dismantlement technologies.

  8. NETL to establish Dynamic Simulation Research and Training Center to promote IGCC technology with CO2 cpture

    Energy Technology Data Exchange (ETDEWEB)

    Provost, G.; Zitney, S.; Turton, R.; Erbes, M.; Stone, H.; Bhattacharyya, D.; Liese, E.; McClintock, M.; Quintrell, M.

    2009-01-01

    To meet increasing demand for education and experience with commercial-scale, coal-fired, integrated gasification combined cycle (IGCC) plants with CO2 capture, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) is leading a project to deploy a generic, full-scope, real-time IGCC dynamic plant simulator for use in establishing a world-class research and training center, and to promote and demonstrate IGCC technology to power industry personnel. The simulator, being built by Invensys Process Systems (IPS), will be installed at two separate sites, at NETL and West Virginia University (WVU), and will combine a process/gasification simulator with a power/combined-cycle simulator together in a single dynamic simulation framework for use in engineering research studies and training applications. The simulator, scheduled to be launched in mid-year 2010, will have the following capabilities: High-fidelity, dynamic model of process-side (gasification and gas cleaning with CO2 capture) and power-block-side (combined cycle) for a generic IGCC plant fueled by coal and/or petroleum coke. Highly flexible configuration that allows concurrent training on separate gasification and combined cycle simulators, or up to two IGCC simulators. Ability to enhance and modify the plant model to facilitate studies of changes in plant configuration, equipment, and control strategies to support future R&D efforts. Training capabilities including startup, shutdown, load following and shedding, response to fuel and ambient condition variations, control strategy analysis (turbine vs. gasifier lead, etc.), representative malfunctions/trips, alarms, scenarios, trending, snapshots, data historian, etc. To support this effort, process descriptions and control strategies were developed for key sections of the plant as part of the detailed functional specification, which is serving as the basis of the simulator development. In this paper, we highlight the contents of the

  9. An International Development Technology Center

    Science.gov (United States)

    Morgan, Robert P.

    1969-01-01

    Main focus of the Center is "the application of science and technology to the solution of problems faced by people in less-developed areas of the world. Adapted from paper presented at ASEE Annual Meeting, The Pennsylvania State University, June, 1969. (Author/WM)

  10. Center for Prostate Disease Research

    Data.gov (United States)

    Federal Laboratory Consortium — The Center for Prostate Disease Research is the only free-standing prostate cancer research center in the U.S. This 20,000 square foot state-of-the-art basic science...

  11. Center for Rehabilitation Sciences Research

    Data.gov (United States)

    Federal Laboratory Consortium — The Center for Rehabilitation Sciences Research (CRSR) was established as a research organization to promote successful return to duty and community reintegration of...

  12. Graduate Automotive Technology Education (GATE) Center

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Hodgson; David Irick

    2005-09-30

    The Graduate Automotive Technology Education (GATE) Center at the University of Tennessee, Knoxville has completed its sixth year of operation. During this period the Center has involved thirteen GATE Fellows and ten GATE Research Assistants in preparing them to contribute to advanced automotive technologies in the center's focus area: hybrid drive trains and control systems. Eighteen GATE students have graduated, and three have completed their course work requirements. Nine faculty members from three departments in the College of Engineering have been involved in the GATE Center. In addition to the impact that the Center has had on the students and faculty involved, the presence of the center has led to the acquisition of resources that probably would not have been obtained if the GATE Center had not existed. Significant industry interaction such as internships, equipment donations, and support for GATE students has been realized. The value of the total resources brought to the university (including related research contracts) exceeds $4,000,000. Problem areas are discussed in the hope that future activities may benefit from the operation of the current program.

  13. (Pittsburgh Energy Technology Center): Quarterly technical progress report for the period ending June 30, 1987. [Advanced Coal Research and Technology Development Programs

    Energy Technology Data Exchange (ETDEWEB)

    None

    1988-02-01

    Research programs on coal and coal liquefaction are presented. Topics discussed are: coal science, combustion, kinetics, surface science; advanced technology projects in liquefaction; two stage liquefaction and direct liquefaction; catalysts of liquefaction; Fischer-Tropsch synthesis and thermodynamics; alternative fuels utilization; coal preparation; biodegradation; advanced combustion technology; flue gas cleanup; environmental coordination, and technology transfer. Individual projects are processed separately for the data base. (CBS)

  14. Global Hydrology Research Center

    Data.gov (United States)

    National Aeronautics and Space Administration — The GHRC is the data management and user services arm of the Global Hydrology and Climate Center. It encompasses the data and information management, supporting...

  15. Hazardous Waste Research Center

    Data.gov (United States)

    Federal Laboratory Consortium — The U.S. Army Engineer Waterways Experiment Station (WES) is playing a major role in development of technologies for cleanup of toxic and hazardous waste in military...

  16. A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers

    Directory of Open Access Journals (Sweden)

    Mahdi Iran-nejad-parizi

    2013-01-01

    Full Text Available This study investigates organizational structure, culture, and information technology as knowledge management (KM infrastructural capabilities, and compares their significance and status quo in five medical research centers in Tehran, Iran. Objectives of this research were pursued by employing two statistical methods, regression analysis and Friedman test. Included in the study were 135 people (researchers and support staff from five medical and healthcare research centers of Tehran. A survey questionnaire including 23 questions was utilized to examine organizational structure, culture and information technology indicators. And another 12 questions examined KM effectiveness. The Friedman test indicated that in terms of their status quo, the three studied KM enablers are at different conditions, with organizational culture having the best (mean rank=1.79 and IT the worst (mean rank=2.14 status. Moreover, it was revealed by regression analysis that organizational structure is believed to have the most significant impact (Beta= 0.397 on the effectiveness of knowledge management initiatives, while information technology gained the least perceived impact (Beta= 0.176.

  17. NRH Neuroscience Research Center

    Science.gov (United States)

    2008-06-01

    PRESENTATIONS: INTERNATIONAL STUDIES Stroke Rehabilitation Practice in New Zealand and the U.S. (H McNaughton) The European CERISE Study (K Putman ) A...National Rehabilitation Hospital on September 8-9, 2007 • Our project team hosted, Koen Putman , PT, PhD, a Fulbright Scholar from the Free...University of Brussels. The Project team worked with Dr. Putman in merging his data from a 5-center (from 4 countries) stroke rehabilitation outcomes study

  18. Activity report of Computing Research Center

    Energy Technology Data Exchange (ETDEWEB)

    1997-07-01

    On April 1997, National Laboratory for High Energy Physics (KEK), Institute of Nuclear Study, University of Tokyo (INS), and Meson Science Laboratory, Faculty of Science, University of Tokyo began to work newly as High Energy Accelerator Research Organization after reconstructing and converting their systems, under aiming at further development of a wide field of accelerator science using a high energy accelerator. In this Research Organization, Applied Research Laboratory is composed of four Centers to execute assistance of research actions common to one of the Research Organization and their relating research and development (R and D) by integrating the present four centers and their relating sections in Tanashi. What is expected for the assistance of research actions is not only its general assistance but also its preparation and R and D of a system required for promotion and future plan of the research. Computer technology is essential to development of the research and can communize for various researches in the Research Organization. On response to such expectation, new Computing Research Center is required for promoting its duty by coworking and cooperating with every researchers at a range from R and D on data analysis of various experiments to computation physics acting under driving powerful computer capacity such as supercomputer and so forth. Here were described on report of works and present state of Data Processing Center of KEK at the first chapter and of the computer room of INS at the second chapter and on future problems for the Computing Research Center. (G.K.)

  19. Kessler Foundation Research Center

    Science.gov (United States)

    ... you, Kessler Foundation researchers have been studying wearable robotic exoskeletons in people with paralysis and weakness, and ... info@kesslerfoundation.org Kessler Foundation 2015 © | accessibility statement | careers | privacy policy | press releases

  20. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  1. 2013 DOE Bioenergy Technologies Office (BETO) Project Peer Review—Biodiesel Cellulosic Ethanol Research Project (Hendry County Sustainable Biofuels Center)

    Energy Technology Data Exchange (ETDEWEB)

    Capece, John [Intelligentsia International Inc., LaBelle, FL (United States)

    2013-05-22

    The presentation provides an overview of the Biodiesel Cellulosic Ethanol Research Project (Hendry County Sustainable Biofuels Center). It summarizes the project history, timeline, budget, partners, objectives, goals, future plans and in closer detail reviews the used approaches and technical accomplishments. The main project goals were (1) developing strategies and tools that assist in the creation of economically and environmentally sustainable bioenergy industries within ecologically-sensitive regions such as South Florida and, in particular, the greater Everglades, (2) using these bioenergy strategies and tools in evolving the existing agricultural, urban, and ecological sectors towards more sustainable structures and practices and (3) using bioenergy as a focal point in the larger effort to mitigate climate change and sea level rise, realities with particularly catastrophic consequences for South Florida. The project started on Oct 1, 2010 and ended on Feb 28, 2013. It yearly average budget was $369,770, with the Dept. of Energy annual cost share of $317,167. The main project partners were Hendry County, University of Florida - Institute of Food and Agricultural Sciences, Intelligentsia International, Inc., Edison State College and University of South Florida. Used approaches, main accomplishments and results in the categories of (1) technical research, (2) education and (3) business development are presented in detail. The project uniqueness is mainly related to the use of system approaches and integrating several systems analyses. Relevance of the project applicable to sustainability of bioenergy, food production, & restoration is explained, critical success factors are challenges are outlined and future work drafted. Finally, the main publications and presentations catalogue list is presented.

  2. Analytical capabilities of the new thermal neutron prompt gamma-ray activation analysis instrument at the National Institute of Standards and Technology Center for Neutron Research

    Energy Technology Data Exchange (ETDEWEB)

    Mackey, E.A. [National Institute of Standards and Technology, Analytical Chemistry Division, Gaithersburg, MD (United States); Anderson, D.L. [US Food and Drug Administration, Elemental Research Branch, College Park, MD (United States)

    2004-07-01

    A new thermal neutron prompt gamma-ray activation analysis (PGAA) instrument was designed and built to replace the original PGAA system at the National Institute of Standards and Technology's Center for Neutron Research. The new PGAA instrument was constructed to achieve a reduction of the fast neutron beam component, a reduction of background gamma-radiation (including gamma-ray lines that directly interfere with element analyses, low-energy scattered gamma rays, and Compton scattered gamma rays), improvement in element sensitivities and limits of detection (LODs), and a simplified instrument set-up procedure. (orig.)

  3. Transportation Research & Analysis Computing Center

    Data.gov (United States)

    Federal Laboratory Consortium — The technical objectives of the TRACC project included the establishment of a high performance computing center for use by USDOT research teams, including those from...

  4. Transportation Research & Analysis Computing Center

    Data.gov (United States)

    Federal Laboratory Consortium — The technical objectives of the TRACC project included the establishment of a high performance computing center for use by USDOT research teams, including those from...

  5. Mission & Role | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The NCI TTC serves as the focal point for implementing the Federal Technology Transfer Act to utilize patents as incentive for commercial development of technologies and to establish research collaborations and licensing among academia, federal laboratories, non-profit organizations, and industry. The TTC supports technology development activities for the National Cancer Institute and nine other NIH Institutes and Centers. TTC staff negotiate co-development agreements and licenses with universities, non-profit organizations, and pharmaceutical and biotechnology companies to ensure compliance with Federal statutes, regulations and the policies of the National Institutes of Health. TTC also reviews employee invention reports and makes recommendations concerning filing of domestic and foreign patent applications. | [google6f4cd5334ac394ab.html

  6. Center for Nanoscale Science and Technology

    Science.gov (United States)

    NIST Center for Nanoscale Science and Technology (Program website, free access)   Currently there is no database matching your keyword search, but the NIST Center for Nanoscale Science and Technology website may be of interest. The Center for Nanoscale Science and Technology enables science and industry by providing essential measurement methods, instrumentation, and standards to support all phases of nanotechnology development, from discovery to production.

  7. Involving Minority High School Students in Cutting Edge Research through C-DEBI, an NSF-National Science and Technology Center

    Science.gov (United States)

    Singer, E.; Edwards, K. J.

    2012-12-01

    The Center for Dark Energy Biosphere Investigations (C-DEBI) was established as a National Science and Technology Center (NTC) funded by NSF in 2009. Its mission is to explore life beneath the seafloor and make transformative discoveries that advance science, benefit society, and inspire people of all ages and origins. Thanks to the multi-institutional character of C-DEBI, the Center has not only started a collaborative framework for experimental and exploratory research, but also targets education programs at the K-12, undergraduate, graduate and postdoctoral levels involving biogeochemists, microbiologists, geochemists and geologists. An example for this is the introduction of deep biosphere research into the K-12 classroom. In this context, C-DEBI has collaborated with teachers from the Animo Leadership High School in Inglewood, which is ranked 27th within California and has a total minority enrollment of 99%, to adapt Marine Biology classes and introduce latest Deep Biosphere Science discoveries. Three high school students participated in a pilot project over 6 months to gain hands-on experience in an ongoing study in a Marine Microbiology laboratory at University of Southern California. Graduate and postdoctoral students from the Departments of Biological and Earth Sciences supervised theory, praxis and project design, which was aimed at culturing strains of Marinobacter, one of the most ubiquitous marine microbial genera, and preparing extracted DNA for sequencing using the latest Ion Torrent Technology. Students learned about the interdisciplinary global context of the study and gained experience in laboratory procedures, including basic aseptical techniques, molecular biology methods, and cutting-edge sequencing Technology, as well as problem-solving and creative thinking in project preparation and conduction. This hands-on training included discussions about the 'Whys' and 'Hows' in today's research with respect to their specific project, but also from a

  8. 70 Years of Aeropropulsion Research at NASA Glenn Research Center

    Science.gov (United States)

    Reddy, Dhanireddy R.

    2013-01-01

    This paper presents a brief overview of air-breathing propulsion research conducted at the NASA Glenn Research Center (GRC) over the past 70 years. It includes a historical perspective of the center and its various stages of propulsion research in response to the countrys different periods of crises and growth opportunities. GRCs research and technology development covered a broad spectrum, from a short-term focus on improving the energy efficiency of aircraft engines to advancing the frontier technologies of high-speed aviation in the supersonic and hypersonic speed regimes. This paper highlights major research programs, showing their impact on industry and aircraft propulsion, and briefly discusses current research programs and future aeropropulsion technology trends in related areas

  9. The ConocoPhillips Center for a Sustainable WE2ST (Water-Energy Education, Science, and Technology): Lessons Learned from an Innovative Research-Education-Outreach Center at Colorado School of Mines

    Science.gov (United States)

    Hogue, T. S.; Blaine, A. C.; Martin, A. C.

    2016-12-01

    The ConocoPhillips Center for a Sustainable WE2ST (Water-Energy Education, Science, and Technology) is a testament to the power of collaboration and innovation. WE2ST began as a partnership between ConocoPhillips (foundation gift) and the Colorado School of Mines (CSM) with the goal of fostering solutions to water-energy challenges via education, research and outreach. The WE2ST center is a training ground for the next generation of water-energy-social scientists and engineers and is a natural fit for CSM, which is known for its expertise in water resources, water treatment technologies, petroleum engineering, geosciences, and hydrology. WE2ST has nine contributing faculty researchers that combine to create a web of expertise on sustainable energy and water resources. This research benefits unconventional energy producers, water-reliant stakeholders and the general public. Areas of focus for research include water sources (quality and quantity), integrated water-energy solution viability and risk, and social-corporate responsibility. The WE2ST Center currently provides annual support for 8-9 Graduate Fellows and 13 Undergraduate Scholars. Top-tier graduate students are recruited nationally and funded similar to an NSF Graduate Research Fellowship (GRF). Undergraduate Scholars are also recruited from across the CSM campus to gain experience in faculty laboratories and on research teams. All WE2ST students receive extensive professional skills training, leadership development, communication skills training, networking opportunities in the water-energy industries, and outreach opportunities in the community. The corner stone of the WE2ST Center is a focus on communication with the public. Both in social science research teams and in general interactions with the public, WE2ST seeks to be "an honest broker" amidst a very passionate and complex topic. WE2ST research is communicated by presentations at technical conferences, talking with people at public gatherings

  10. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  11. User-centered Technologies For Blind Children

    Directory of Open Access Journals (Sweden)

    Jaime Sánchez

    2008-01-01

    Full Text Available The purpose of this paper is to review, summarize, and illustrate research work involving four audio-based games created within a user-centered design methodology through successive usability tasks and evaluations. These games were designed by considering the mental model of blind children and their styles of interaction to perceive and process data and information. The goal of these games was to enhance the cognitive development of spatial structures, memory, haptic perception, mathematical skills, navigation and orientation, and problem solving of blind children. Findings indicate significant improvements in learning and cognition from using audio-based tools specially tailored for the blind. That is, technologies for blind children, carefully tailored through user-centered design approaches, can make a significant contribution to cognitive development of these children. This paper contributes new insight into the design and implementation of audio-based virtual environments to facilitate learning and cognition in blind children.

  12. Search Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  13. Available Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  14. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-04-30

    The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

  15. Engineer Research and Development Center's Materials Testing Center (MTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Engineer Research and Development Center's Materials Testing Center (MTC) is committed to quality testing and inspection services that are delivered on time and...

  16. CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan; Hull, Christopher

    2014-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

  17. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  18. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  19. CAD/BIM Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — Supporting Better Decisions in Facility, Infrastructure, and Environment Management Access to technology tools to model structures before they are built can provide...

  20. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-05-31

    The programming and website for the advanced Technology Information System (TIS) have been completed. Over and above the LSDDP-TIS, the new system provides information on DOE's baseline technologies, technology data contained in DOE's databases, technologies assessed at FIU-HCET Technology Assessment Program (TAP), as well as links to other selected D&D sites with valuable technology information. The new name for the website is Gateway for Environmental Technology (GET). A super-vacuum type blasting system was tested for decontamination of 12-in pipe internal surfaces. The system operates on compressed air and propels grit media at high speed at wall surfaces. It is equipped with a vacuum system for collecting grit, dust, and debris. This technology was selected for further development. The electret ion chamber (EIC) system for measurement of alpha contamination on surfaces has been calibrated and is ready for demonstration and deployment. FIU-HCET is working with representatives from Fernald, Oak Ridge, Rocky Flats, and Savannah River to procure a demonstration and deployment site. Final arrangements are ongoing for the mock-up design for the glove box and tank size reduction technology assessments, including designing of support bases for tanks, a piping support system, and a mobilization plan for glove boxes and tanks from storage site to the PermaCon.

  1. CAD/BIM Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — Supporting Better Decisions in Facility, Infrastructure, and Environment ManagementAccess to technology tools to model structures before they are built can provide...

  2. The technology of indirectly irradiated targets for inertial fusion researches at the Russian Federal nuclear center - VNIIEF

    Energy Technology Data Exchange (ETDEWEB)

    Andramanova, Y.V.; Veselov, A.V.; Zhidkov, N.V.; Ivanin, I.A.; Ignatev, Y.V.; Izgorodin, V.M.; Kirillov, G.A.; Komleva, G.A.; Makarov, M.Y.; Medvedev, E.F.; Morovov, A.P.; Nikolaev, G.P.; Pinegin, A.V.; Romaev, V.N.; Solomatina, E.Y.; Tacenko, M.V.; Tenyaev, B.N.; Cherkesova, I.N.; Yukhimchuk, A.A. [Russian Federal Nuclear Center, All-Russian Scientific Research Institute of Experimental Physics, RFNC-VNIIEF, Sarov (Russian Federation)

    2000-07-01

    The results of targets technology development for indirectly drive implosion experiments on the laser facility ISKRA-5, and also the constructions of targets developed at VNIIEF during last 4 years are represented. Moreover, a development of not destroying control methods for target parameters is written. (authors)

  3. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-01-31

    FIU-HCET participated in an ICT meeting at Mound during the second week of December and presented a brief videotape of the testing of the Robotic Climber technology. During this meeting, FIU-HCET proposed the TechXtract technology for possible testing at Mound and agreed to develop a five-page proposal for review by team members. FIU-HCET provided assistance to Bartlett Inc. and General Lasertronics Corporation in developing a proposal for a Program Opportunity Notice (PON). The proposal was submitted by these companies on January 5, 1999. The search for new equipment dismantlement technologies is continuing. The following vendors have responded to requests for demonstration: LUMONICS, Laser Solutions technology; CRYO-BEAM, Cryogenic cutting technology; Waterjet Technology Association, Waterjet Cutting technology; and DIAJET, Waterjet Cutting technology. Based on the tasks done in FY98, FIU-HCET is working closely with Numatec Hanford Corporation (NHC) and Pacific Northwest National Laboratory (PNNL) to revise the plan and scope of work of the pipeline plugging project in FY99, which involves activities of lab-scale flow loop experiments and a large-scale demonstration test bed.

  4. [Research activities in Kobe-Indonesia Collaborative Research Centers].

    Science.gov (United States)

    Utsumi, Takako; Hayashi, Yoshitake; Hotta, Hak

    2013-01-01

    Kobe-Indonesia Collaborative Research Center was established in Institute of Tropical Disease (ITD), Airlangga University, Surabaya, Indonesia in 2007 under the program of ''Founding Research Centers for Emerging and Reemerging Infectious Diseases'' supported by the Ministry of Education, Culture, Sports, Science and Technology, Japan, and then it has been under the Japan Initiative for Global Research Network on Infectious Diseases (J-GRID) since 2010. Japanese researchers have been stationed at ITD, conducting joint researches on influenza, viral hepatitis, dengue and infectious diarrhea. Also, another Japanese researcher has been stationed at Faculty of Medicine, University of Indonesia, Jakarta, carrying out joint researches on'' Identification of anti-hepatitis C virus (HCV) substances and development of HCV and dengue vaccines'' in collaboration with University of Indonesia and Airlangga University through the Science and Technology Research Partnership for Sustainable Development (SATREPS) supported by the Japan Science and Technology Agency (JST) and Japan International Cooperation Agency (JICA) since 2009. In this article, we briefly introduce the background history of Kobe University Research Center in Indonesia, and discuss the research themes and outcomes of J-GRID and SATREPS activities.

  5. Advanced technologies for Mission Control Centers

    Science.gov (United States)

    Dalton, John T.; Hughes, Peter M.

    1991-01-01

    Advance technologies for Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: technology needs; current technology efforts at GSFC (human-machine interface development, object oriented software development, expert systems, knowledge-based software engineering environments, and high performance VLSI telemetry systems); and test beds.

  6. Directory of Manufacturing Research Centers

    Science.gov (United States)

    1989-06-01

    L. Lehn P. Klinefelter A DoD Information Analysis Center UNCLASSIFIED ECURITY CLASSIFICATION OF THIS PAGE REPORT DOCUMENTATION PAGE a. REPORT...in R&D, industrial innovation case histories , and managing innovation. Industry recognizes that research and development are indispensable to the

  7. Optimizing Low Temperature Diesel Combustion (LTC-D) "FreedomCAR and Vehicle Technologies Program Solicitation for University Research and Graduate Automotice Technology Education (GATE) Centers of Excellence"

    Energy Technology Data Exchange (ETDEWEB)

    Rolf Reitz; P. Farrell; D. Foster; J. Ghandhi; C. Rutland; S. Sanders

    2009-07-31

    The engine industry is currently facing severe emissions mandates. Pollutant emissions from mobile sources are a major source of concern. For example, US EPA mandates require emissions of particulate and nitrogen oxides (NOx) from heavy-duty diesel engine exhaust to drop at least 90 percent between 1998 and 2010. Effective analysis of the combustion process is required to guide the selection of technologies for future development since exhaust after-treatment solutions are not currently available that can meet the required emission reduction goals. The goal of this project is to develop methods to optimize and control Low Temperature Combustion Diesel technologies (LTC-D) that offers the potential of nearly eliminating engine NOx and particulate emissions at reduced cost over traditional methods by controlling pollutant emissions in-cylinder. The work was divided into 5 Tasks, featuring experimental and modeling components: 1.) Fundamental understanding of LTC-D and advanced model development, 2.) Experimental investigation of LTC-D combustion control concepts, 3.) Application of detailed models for optimization of LTC-D combustion and emissions, 4.) Impact of heat transfer and spray impingement on LTC-D combustion, and 5.) Transient engine control with mixed-mode combustion. As described in the final report (December 2008), outcomes from the research included providing guidelines to the engine and energy industries for achieving optimal low temperature combustion operation through using advanced fuel injection strategies, and the potential to extend low temperature operation through manipulation of fuel characteristics. In addition, recommendations were made for improved combustion chamber geometries that are matched to injection sprays and that minimize wall fuel films. The role of fuel-air mixing, fuel characteristics, fuel spray/wall impingement and heat transfer on LTC-D engine control were revealed. Methods were proposed for transient engine operation during

  8. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-07-31

    FIU-HCET personnel visited the Special Technologies Laboratory (STL) for discussions with the Principal Investigator (PI) of Laser Induced Fluorescence Imaging (LIFI) and for training in LIFI. Mr. Peter Gibbons, Tanks Retrieval Technology Integration Manager, visited FIU-HCET on July 20, 1999. Mr. Gibbons inspected the pipeline unplugging experimental facility at the HCET testing field. The detailed test bed construction, testing plan, and plugging material specifications were discussed.

  9. Overview of NASA Lewis Research Center free-piston Stirling engine technology activities applicable to space power systems

    Science.gov (United States)

    Slaby, Jack G.

    1987-01-01

    A brief overview is presented of the development and technological activities of the free-piston Stirling engine. The engine started as a small scale fractional horsepower engine which demonstrated basic engine operating principles and the advantages of being hermetically sealed, highly efficient, and simple. It eventually developed into the free piston Stirling engine driven heat pump, and then into the SP-100 Space Reactor Power Program from which came the Space Power Demonstrator Engine (SPDE). The SPDE successfully operated for over 300 hr and delivered 20 kW of PV power to an alternator plunger. The SPDE demonstrated that a dynamic power conversion system can, with proper design, be balanced; and the engine performed well with externally pumped hydrostatic gas bearings.

  10. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-03-30

    A vendor was selected for the diamond wire technology demonstration scheduled for this summer at Princeton Plasma Physics Laboratory (PPPL). A team consisting of personnel from FIU-HCET, PPPL, and AEA Technology reviewed the submitted bids. FIU-HCET will contract this vendor. At the SRS Ninth ICT teleconference, the ICT team discussed the status of the following demonstrations: LRAD; x-ray, K-edge; Strippable Coatings; Thermal Spray Vitrification; Cutting/Shearing/Dismantlement/Size Reduction; and Electrets. The LRAD demo is complete, and the x-ray/K-edge, Strippable Coatings, and Electrets demos are ongoing. The Asbestos and Thermal Spray Vitrification demos require more laboratory testing. The Cutting/Shearing/Dismantlement/Size Reduction demo is undergoing procurement. Five FIU-HCET staff members took the 1S0 14000 environmental auditor training course February 22-26, 1999, given by ASC. The test plan for the Facility Dismantlement Technology Assessment is finished and ready for internal review.

  11. Bolivia. The new nuclear research center in El Alto

    Energy Technology Data Exchange (ETDEWEB)

    Nogarin, Mauro

    2016-05-15

    Research reactors in Latin America have become a priority in public policy in the last decade. Bolivia wants to become the 8th country to implement peaceful nuclear technology in this area with the new Center for Research and Development in the Nuclear Technology. The Center will be the most advanced in Latin America. It will provide for a wide use of radiation technologies in agriculture, medicine, and industry. After several negotiations Bolivia and the Russian Federation signed the Intergovernmental Agreement on cooperation in the peaceful use of atomic energy and the construction of the Nuclear Research and Technology Center.

  12. Northern Prairie Wildlife Research Center

    Science.gov (United States)

    ,

    2009-01-01

    The Northern Prairie Wildlife Research Center (NPWRC) conducts integrated research to fulfill the Department of the Interior's responsibilities to the Nation's natural resources. Located on 600 acres along the James River Valley near Jamestown, North Dakota, the NPWRC develops and disseminates scientific information needed to understand, conserve, and wisely manage the Nation's biological resources. Research emphasis is primarily on midcontinental plant and animal species and ecosystems of the United States. During the center's 40-year history, its scientists have earned an international reputation for leadership and expertise on the biology of waterfowl and grassland birds, wetland ecology and classification, mammalian behavior and ecology, grassland ecosystems, and application of statistics and geographic information systems. To address current science challenges, NPWRC scientists collaborate with researchers from other U.S. Geological Survey centers and disciplines (Biology, Geography, Geology, and Water) and with biologists and managers in the Department of the Interior (DOI), other Federal agencies, State agencies, universities, and nongovernmental organizations. Expanding upon its scientific expertise and leadership, the NPWRC is moving in new directions, including invasive plant species, restoration of native habitats, carbon sequestration and marketing, and ungulate management on DOI lands.

  13. Savannah River Technology Center monthly report

    Energy Technology Data Exchange (ETDEWEB)

    1992-10-01

    This document contains many small reports from personnel at the technology center under the umbrella topics of reactors, tritium, separations, environment, waste management, and general engineering. Progress and accomplishments are given.

  14. Earth System Grid Center for Enabling Technologies (ESG-CET): A Data Infrastructure for Data-Intensive Climate Research

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-06-03

    For the Earth System Grid Federation (ESGF), the ESG-CET team has led international development and delivered a production environment for managing and accessing ultrascale climate data. This production environment includes multiple national and international climate projects (e.g., Couple Model Intercomparison Project, Community Earth System Model), ocean model data (such as the Parallel Ocean Program), observation data (Carbon Dioxide Information and Analysis Center, Atmospheric Infrared Sounder, and so forth), and analysis and visualization tools, all of which serve a diverse community of users. These data holdings and services are distributed across multiple ESG-CET sites (such as LANL, LBNL, LLNL, NCAR, and ORNL) as well as at unfunded partners sites such as the Australian National University National Computational Infrastructure, the British Atmospheric Data Centre, the National Oceanic and Atmospheric Administration Geophysical Fluid Dynamics Laboratory, the Max Planck Institute for Meteorology, the German Climate Computing Centre, and the National Aeronautics and Space Administration Jet Propulsion Laboratory. More recently, ESG-CET has been extending services beyond data-file access and delivery to develop more detailed information products (scientific graphics, animations, etc.), secure binary data-access services (based upon the OPeNDAP protocol), and server-side analysis capabilities. These will allow users to request data subsets transformed through commonly used analysis and intercomparison procedures. As we transition from development activities to production and operations, the ESG-CET team is tasked with making data available to all users seeking to understand, process, extract value from, visualize, and/or communicate it to others. This ongoing effort, though daunting in scope and complexity, will greatly magnify the value of numerical climate model outputs and climate observations for future national and international climate-assessment reports

  15. NASA(Field Center Based) Technology Commercialization Centers

    Science.gov (United States)

    1995-01-01

    Under the direction of the IC(sup 2) Institute, the Johnson Technology Commercialization Center has met or exceeded all planned milestones and metrics during the first two and a half years of the NTCC program. The Center has established itself as an agent for technology transfer and economic development in- the Clear Lake community, and is positioned to continue as a stand-alone operation. This report presents data on the experimental JTCC program, including all objective measures tracked over its duration. While the metrics are all positive, the data indicates a shortage of NASA technologies with strong commercial potential, barriers to the identification and transfer of technologies which may have potential, and small financial return to NASA via royalty-bearing licenses. The Center has not yet reached the goal of self-sufficiency based on rental income, and remains dependent on NASA funding. The most important issues raised by the report are the need for broader and deeper community participation in the Center, technology sourcing beyond JSC, and the form of future funding which will be appropriate.

  16. Idaho Nuclear Technology and Engineering Center Sodium-Bearing Waste Treatment Research and Development FY-2002 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Deldebbio, John Anthony; Mc Cray, John Alan; Kirkham, Robert John; Olson, Lonnie Gene; Scholes, Bradley Adams

    2002-09-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) is considering several optional processes for disposal of liquid sodium-bearing waste. During fiscal year 2002, immobilization-related research included of grout formulation development for sodium-bearing waste, absorption of the waste on silica gel, and off-gas system mercury collection and breakthrough using activated carbon. Experimental results indicate that sodium-bearing waste can be immobilized in grout at 70 weight percent and onto silica gel at 74 weight percent. Furthermore, a loading of 11 weight percent mercury in sulfur-impregnated activated carbon was achieved with 99.8% off-gas mercury removal efficiency.

  17. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A.Ebadian

    1999-02-28

    Search for decontamination technologies to be assessed at FIU-HCET continues. Bartlett Nuclear Inc. returned to FIU-HCET on February 15-19, 1999, to complete the demonstration of coating removal from concrete ceiling and aggressive contamination removal on uncoated concrete wall using their Robotic Climber. The design of test beds for large-scale technology demonstration of blockage locating and pipe unplugging has undergone major revision. The lab-scale test loop is also under modification. A new sampling system using isokinetic principles and consisting of thermistors, flow controller, and Wheatstone bridge will be installed on the flow loop. FIU-HCET International Coordinator attended the VII Steering Committee meeting in Lima, Peru, on February 11-12, 1999, and successfully introduced the Interactive Communication Website. Additional agenda items on the Website were proposed by the Steering Committee for upcoming committee meetings and working groups.

  18. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-06-30

    To enhance the measurement capability of EICs to alpha spectrometry, measurements at FIU-HCET were performed on different energy alpha sources, and response factors of ST electrets in 960-mL chamber were determined. Earlier, EIC was considered as only a charge-integrating device without spectrometric capability. This is a potentially significant development accomplished by FIU-HCET. It could appreciably lower the current cost of spectral characterization. FIU-HCET has been invited to participate in the Operating Engineers' National Hazmat program's assessment of the Mini Mitter, commercially known as the VitalSense{trademark} Telemetric Monitoring System. This evaluation is scheduled for early July 1999. Additional health and safety technology evaluations, in which FIU-HCET will also participate, are also scheduled for later in the summer. The Technology Information System (TIS), MISD, and DASD are now complete and accessible through the Internet website http://www.DandD.org/tis.

  19. Synthesis centers as critical research infrastructure

    Science.gov (United States)

    Baron, Jill; Specht, Alison; Garnier, Eric; Bishop, Pamela; Campbell, C. Andrew; Davis, Frank W.; Fady, Bruno; Field, Dawn; Gross, Louis J.; Guru, Siddeswara M.; Halpern, Benjamin S; Hampton, Stephanie E.; Leavitt, Peter R.; Meagher, Thomas R.; Ometto, Jean; Parker, John N.; Price, Richard; Rawson, Casey H.; Rodrigo, Allen; Sheble, Laura A.; Winter, Marten

    2017-01-01

    investment to maximize benefits to science and society is justified. In particular, we argue that synthesis centers represent community infrastructure more akin to research vessels than to term-funded centers of science and technology (e.g., NSF Science and Technology Centers). Through our experience running synthesis centers and, in some cases, developing postfederal funding models, we offer our perspective on the purpose and value of synthesis centers. We present case studies of different outcomes of transition plans and argue for a fundamental shift in the conception of synthesis science and the strategic funding of these centers by government funding agencies.

  20. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    1999-09-30

    The Princeton Plasma Physics Laboratory (PPPL) demonstration of the diamond wire cutting technology on the surrogate of the Tokamak Fusion Test Reactor (TFTR), Figure 1, was performed from August 23-September 3, 1999. The plated diamond wire, Figure 2, was successful in cutting through all components of the TFTR surrogate including stainless steel, inconel and graphite. The demonstration tested three different void fill materials (mortar with sand, Rheocell-15, and foam) and three cooling systems (water, air, and liquid nitrogen). The optimum combination was determined to be the use of the low-density concrete void fill, Rheocell-15 with an average density of 52 lbs/ft{sup 3}, using a water coolant. However, the liquid nitrogen performed better than expected with only minor problems and was considered to be a successful demonstration of the Bluegrass Concrete Cutting, Inc. proprietary liquid-nitrogen coolant system. Data from the demonstration is being calculated and a summary of the technology demonstration will be included in the October monthly report. An ITSR will be written comparing the diamond wire saw to the plasma arc (baseline) technology. The MTR Chemical Protective Suit, a proprietary new suit from Kimberly Clark, was evaluated from 8/9/99 to 8/12/99 at Beaver, WV. This particular suit was tested on subjects performing three different tasks: climbing through a horizontal confined space, vertical confined space (pit), and loading and unloading material using a wheel barrow. Multiple test subjects performed each task for 20 minutes each. Performance of the innovative suit was compared to two commonly used types of protective clothing. Vital statistics, including body temperature and heart rate, were continuously monitored and recorded by an authorized physician. A summary of the demonstration will be included in the October monthly report. Along with the MTR Chemical Protective Suit, the VitalSense{trademark} Telemetric Monitoring System from Mini Mitter

  1. Research and Technology 1980

    Science.gov (United States)

    1980-01-01

    Topics are divided into three major areas: Earth resources, advanced development, and technology transfer. Topics include: aerial color infrared photography, fiber optics, lightning research, soil mechanics, corrosion prevention, image processing, and communication systems development.

  2. Technologies for Learner-Centered Feedback

    Science.gov (United States)

    Costello, Jane; Crane, Daph

    2013-01-01

    As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes.…

  3. Center for Assistive Technology & Environmental Access

    Science.gov (United States)

    ... new address and college name * The Center for Assistive Technology and Environmental Access Georgia Institute of Technology (GT) College of Design 512 Means St., Suite 300, Atlanta, GA 30332-0156 (for shipping, please use 30318) U.S.A. Phone: 404-894-4960 (v/tty) ... | Privacy Agreement

  4. HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian

    2000-01-31

    The Online Measurement of Decontamination project team received a commitment for a demonstration in May from the Sacramento (California) Municipal Utility District (SMUD) Rancho Seco site. Since this site is a member of the DOE Commercial Utilities Consortium, the demonstration will fulfill the DOE and commercial technology demonstration requirements. Discussion on deployment of the Integrated Vertical and Overhead Decontamination (IVOD) System at Rancho Seco was conducted; date for deployment tentatively scheduled for early spring. Based upon fictional requirements from SRS for a shiny monitor in a high-level waste tank, FIU-HCET developed and delivered a draft slurry monitor design and draft test plan. Experiments measuring slurry settling time for SRS slurry simulant at 10 wt% have been completed on FIU-HCET'S flow loop with SRS dip. The completed design package of the test mockup for evaluating Non-Intrusive Location of Buried Items Technologies was sent to Fluor Fernald and the Operating Engineers National Hazmat Program for review. Comments are due at the end of January. Preliminary experiments to determine size distribution of aerosols generated during metal cutting were performed. A 1/4-inch-thick iron plate was cut using a plasma arc torch, and the size distribution of airborne particles was measured using a multistage impactor. Per request of DOE-Ohio, FIU-HCET participated in a weeklong value engineering study for the characterization, decontamination, and dismantlement of their critical path facility.

  5. Satisloh centering technology developments past to present

    Science.gov (United States)

    Leitz, Ernst Michael; Moos, Steffen

    2015-10-01

    The centering of an optical lens is the grinding of its edge profile or contour in relationship to its optical axis. This is required to ensure that the lens vertex and radial centers are accurately positioned within an optical system. Centering influences the imaging performance and contrast of an optical system. Historically, lens centering has been a purely manual process. Along its 62 years of assembling centering machines, Satisloh introduced several technological milestones to improve the accuracy and quality of this process. During this time more than 2.500 centering machines were assembled. The development went from bell clamping and diamond grinding to Laser alignment, exchange chuckor -spindle systems, to multi axis CNC machines with integrated metrology and automatic loading systems. With the new centering machine C300, several improvements for the clamping and grinding process were introduced. These improvements include a user friendly software to support the operator, a coolant manifold and "force grinding" technology to ensure excellent grinding quality and process stability. They also include an air bearing directly driven centering spindle to provide a large working range of lenses made of all optical materials and diameters from below 10 mm to 300 mm. The clamping force can be programmed between 7 N and 1200 N to safely center lenses made of delicate materials. The smaller C50 centering machine for lenses below 50 mm diameter is available with an optional CNC loading system for automated production.

  6. The National Wind Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Thresher, R W; Hock, S M [National Renewable Energy Lab., Golden, CO (United States); Loose, R R; Cadogon, J B

    1994-07-01

    Wind energy research began at the Rocky Flats test site in 1976 when Rockwell International subcontracted with the Energy Research and Development Administration (ERDA). The Rocky Flats Plant was competitively selected from a number of ERDA facilities primarily because it experienced high instantaneous winds and provided a large, clear land area. By 1977, several small wind turbines were in place. During the facility`s peak of operation, in 1979-1980, researchers were testing as many as 23 small wind turbines of various configurations, including commercially available machines and prototype turbines developed under subcontract to Rocky Flats. Facilities also included 8-kW, 40-kW, and 225-kW dynamometers; a variable-speed test bed; a wind/hybrid test facility; a controlled velocity test facility (in Pueblo, Colorado); a modal test facility, and a multimegawatt switchgear facility. The main laboratory building was dedicated in July 1981 and was operated by the Rocky Flats Plant until 1984, when the Solar Energy Research Institute (SERI) and Rocky Flats wind energy programs were merged and transferred to SERI. SERI and now the National Renewable Energy Laboratory (NREL) continued to conduct wind turbine system component tests after 1987, when most program personnel were moved to the Denver WEst Office Park in Golden and site ownership was transferred back to Rocky Flats. The Combined Experiment test bed was installed and began operation in 1988, and the NREL structural test facility began operation in 1990. In 1993, the site`s operation was officially transferred to the DOE Golden Field Office that oversees NREL. This move was in anticipation of NREL`s renovation and reoccupation of the facility in 1994.

  7. Habitat Technology Research at DLR

    OpenAIRE

    Quantius, Dominik; Schubert, Daniel; Maiwald, Volker; Hauslage, Jens; Bornemann, Gerhild; Waßer, Kai; Hill, Jürgen; Henn, Norbert; Ruyters, Hans-Günter; Braun, Markus

    2013-01-01

    For long duration space missions a closed-loop system which can re-use of materials is mandatory. Also on Earth there are harsh environments or overpopulated areas where a sustainable handling of given goods is indispensable. Addressing these challenges the German Aerospace Center (DLR) conducts research in various fields of habitat technology development, which will be illustrated within this paper. There are various complementary topics, such as coordination and funding of building blocks f...

  8. NASA Airline Operations Research Center

    Science.gov (United States)

    Mogford, Richard H.

    2016-01-01

    This is a PowerPoint presentation NASA airline operations center (AOC) research. It includes information on using IBM Watson in the AOC. It also reviews a dispatcher decision support tool call the Flight Awareness Collaboration Tool (FACT). FACT gathers information about winter weather onto one screen and includes predictive abilities. It should prove to be useful for airline dispatchers and airport personnel when they manage winter storms and their effect on air traffic. This material is very similar to other previously approved presentations with the same title.

  9. NASA University Research Centers Technical Advances in Aeronautics, Space Sciences and Technology, Earth Systems Sciences, Global Hydrology, and Education. Volumes 2 and 3

    Science.gov (United States)

    Coleman, Tommy L. (Editor); White, Bettie (Editor); Goodman, Steven (Editor); Sakimoto, P. (Editor); Randolph, Lynwood (Editor); Rickman, Doug (Editor)

    1998-01-01

    This volume chronicles the proceedings of the 1998 NASA University Research Centers Technical Conference (URC-TC '98), held on February 22-25, 1998, in Huntsville, Alabama. The University Research Centers (URCS) are multidisciplinary research units established by NASA at 11 Historically Black Colleges or Universities (HBCU's) and 3 Other Minority Universities (OMU's) to conduct research work in areas of interest to NASA. The URC Technical Conferences bring together the faculty members and students from the URC's with representatives from other universities, NASA, and the aerospace industry to discuss recent advances in their fields.

  10. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  11. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  12. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  13. Scientific Data Management Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Vouk, Mladen A.

    2013-01-15

    Managing scientific data has been identified by the scientific community as one of the most important emerging needs because of the sheer volume and increasing complexity of data being collected. Effectively generating, managing, and analyzing this information requires a comprehensive, end-to-end approach to data management that encompasses all of the stages from the initial data acquisition to the final analysis of the data. Fortunately, the data management problems encountered by most scientific domains are common enough to be addressed through shared technology solutions. Based on community input, we have identified three significant requirements. First, more efficient access to storage systems is needed. In particular, parallel file system and I/O system improvements are needed to write and read large volumes of data without slowing a simulation, analysis, or visualization engine. These processes are complicated by the fact that scientific data are structured differently for specific application domains, and are stored in specialized file formats. Second, scientists require technologies to facilitate better understanding of their data, in particular the ability to effectively perform complex data analysis and searches over extremely large data sets. Specialized feature discovery and statistical analysis techniques are needed before the data can be understood or visualized. Furthermore, interactive analysis requires techniques for efficiently selecting subsets of the data. Finally, generating the data, collecting and storing the results, keeping track of data provenance, data post-processing, and analysis of results is a tedious, fragmented process. Tools for automation of this process in a robust, tractable, and recoverable fashion are required to enhance scientific exploration. The SDM center was established under the SciDAC program to address these issues. The SciDAC-1 Scientific Data Management (SDM) Center succeeded in bringing an initial set of advanced

  14. Center for Coastline Security Technology, Year 3

    Science.gov (United States)

    2008-05-01

    Figure 2.6.8: Close-Up Photograph of RPUUV Tail Section. Figure 2.6.9: Force and moments applied on a hydrofoil . Figure 2.6.10: The NACA 21016... hydrofoil profile. Florida Atlantic University 4/28/08 Page 10 Center for Coastline Security Technology Year Three-Final Report Figure...as a 3D wing with a NACA 21016 hydrofoil profile (Figure 2.6.10) held by 3 cylinders (Figure 2.6.8). Center for Coastline Security Technology Year

  15. RCOP: Research Center for Optical Physics

    Science.gov (United States)

    Tabibi, Bagher M. (Principal Investigator)

    1996-01-01

    During the five years since its inception, Research Center for Optical Physics (RCOP) has excelled in the goals stated in the original proposal: 1) training of the scientists and engineers needed for the twenty-first century with special emphasis on underrepresented citizens and 2) research and technological development in areas of relevance to NASA. In the category of research training, there have been 16 Bachelors degrees and 9 Masters degrees awarded to African American students working in RCOP during the last five years. RCOP has also provided research experience to undergraduate and high school students through a number of outreach programs held during the summer and the academic year. RCOP has also been instrumental in the development of the Ph.D. program in physics which is in its fourth year at Hampton. There are currently over 40 graduate students in the program and 9 African American graduate students, working in RCOP, that have satisfied all of the requirements for Ph.D. candidancy and are working on their dissertation research. At least three of these students will be awarded their doctoral degrees during 1997. RCOP has also excelled in research and technological development. During the first five years of existence, RCOP researchers have generated well over $3 M in research funding that directly supports the Center. Close ties with NASA Langley and NASA Lewis have been established, and collaborations with NASA scientists, URC's and other universities as well as with industry have been developed. This success is evidenced by the rate of publishing research results in refereed journals, which now exceeds that of the goals in the original proposal (approx. 2 publications per faculty per year). Also, two patents have been awarded to RCOP scientists.

  16. Technologies for learner-centered feedback

    Directory of Open Access Journals (Sweden)

    Jane Costello

    2013-09-01

    Full Text Available As the number, type, and use of technologies to support learning increases, so do the opportunities for using these technologies for feedback. Learner-centered feedback is a core to the teaching-learning process. It is related to assessment in describing how learners perform in their learning, their gain in knowledge, skills, and attitudes. Feedback, types of feedback, guidelines for effective learner-centered feedback, and feedback’s relationship to assessment are presented. Methods of providing feedback, for example, automated, audio scribe pens, digital audio, etc., and the related technologies are described. Technologies that allow instructors to make informed decisions about the use of various methods for feedback are discussed.

  17. The Research Role of a National Center.

    Science.gov (United States)

    Silberman, Harry F.

    The functional role of a national center for vocational education depends on the people doing the work; consequently, the center sets its own agenda when it makes personal decisions. A center's role should include two elements: in setting its own research agenda, a center should take a broad perspective on vocational education; and a center should…

  18. The Research Role of a National Center.

    Science.gov (United States)

    Silberman, Harry F.

    The functional role of a national center for vocational education depends on the people doing the work; consequently, the center sets its own agenda when it makes personal decisions. A center's role should include two elements: in setting its own research agenda, a center should take a broad perspective on vocational education; and a center should…

  19. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  20. License Agreements | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Since the government cannot engage in the development, manufacture, and sale of products, the NCI Technology Transfer Center (TTC) makes its discoveries (and discoveries from nine other NIH Institutes) available to organizations that can assist in the further development and commercialization of these basic science discoveries, to convert them into public health benefits. | [google6f4cd5334ac394ab.html

  1. 2017 Technology Showcase Presentations | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Presentations from the 2017 Technology Showcase by NIH Intramural Research Program scientists held at Frederick National Laboratories for Cancer Research on June 7, 2017. | [google6f4cd5334ac394ab.html

  2. Marshall Space Flight Center Technology Investments Overview

    Science.gov (United States)

    Tinker, Mike

    2014-01-01

    NASA is moving forward with prioritized technology investments that will support NASA's exploration and science missions, while benefiting other Government agencies and the U.S. aerospace enterprise. center dotThe plan provides the guidance for NASA's space technology investments during the next four years, within the context of a 20-year horizon center dotThis plan will help ensure that NASA develops technologies that enable its 4 goals to: 1.Sustain and extend human activities in space, 2.Explore the structure, origin, and evolution of the solar system, and search for life past and present, 3.Expand our understanding of the Earth and the universe and have a direct and measurable impact on how we work and live, and 4.Energize domestic space enterprise and extend benefits of space for the Nation.

  3. Mississippi State University Sustainable Energy Research Center

    Energy Technology Data Exchange (ETDEWEB)

    Steele, W. Glenn [Mississippi State Univ., Mississippi State, MS (United States)

    2014-09-26

    The Sustainable Energy Research Center (SERC) project at Mississippi State University included all phases of biofuel production from feedstock development, to conversion to liquid transportation fuels, to engine testing of the fuels. The feedstocks work focused on non-food based crops and yielded an increased understanding of many significant Southeastern feedstocks. an emphasis was placed on energy grasses that could supplement the primary feedstock, wood. Two energy grasses, giant miscanthus and switchgrass, were developed that had increased yields per acre. Each of these grasses was patented and licensed to companies for commercialization. The fuels work focused on three different technologies that each led to a gasoline, diesel, or jet fuel product. The three technologies were microbial oil, pyrolysis oil, and syngas-to liquid-hydrocarbons

  4. Evaluation Of Investments In Science, Technology And Innovation: Applying Scientific and Technical Human Capital Framework For Assessment of Doctoral Students In Cooperative Research Centers

    Science.gov (United States)

    Leonchuk, Olena

    This dissertation builds on an alternative framework for evaluation of science, technology and innovation (STI) outcomes - the scientific & technical (S&T) human capital which was developed by Bozeman, Dietz and Gaughan (2001). At its core, this framework looks beyond simple economic and publication metrics and instead focuses on scientists' social capital. The premise of the framework is that science does not happen in vacuum and that resources embedded in scientists' social networks are important and enduring outcomes of the scientific process that were not being captured by traditional metrics. This dissertation examines social capital of science and engineering (S&E) graduate students, an underrepresented group of stakeholders in STI evaluations. S&E graduate students are unique for several reasons. In comparison with students in other disciplines, S&E graduate students have a greater proportion of international students; are widely employed by industry in numbers exceeded only by business graduates. And, most importantly, S&E graduates pursue education in fields that contribute the most to the US innovation capacity. This dissertation introduces a multidimensional measure of social capital based on the network theory of social capital proposed by Nan Lin (1999). According to Lin, social capital consists of three components: availability of resources and social embeddedness in one's network and mobilization of these resources. In order to address these elements, the dissertation employs two studies that focus on different components of social capital. Study 1 looks at accessibility of resources in students' social networks and whether students would be likely to mobilize them by using a proxy measure of norms and values about collaborations. The study also addresses the effect of social capital on students' experiences and outcomes, specifically, on their satisfaction and perceived career preparedness. The researcher investigates the mechanisms that explain

  5. The Hydrogen Technology Center at Wyle Laboratories

    Science.gov (United States)

    Wheelock, H.; Smith, D.; Frazier, J.

    1990-10-01

    A deactivated storable propellant test area with numerous test cells, large open concrete pads of up to 65-ft length, and two enclosed metal storage buildings, has been converted into a Hydrogen Technology Center. The conversion strategy involved extensive use of modified surplus equipment, well established testing technologies, and innovative engineering to obviate long-delivery time items. Simple, high heat flux water-to-cryogen heat exchangers are used to generate ambient temperature H2 and N gas. Hydrogen-fueled combustors were designed and fabricated to power the specialized heat exchangers required to support high-temperature hydrogen experiments. The facility has operated productively and safely since October, 1988.

  6. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-11-15

    The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (a) Solid-solid separation (b) Solid-liquid separation (c) Chemical/Biological Extraction (d) Modeling and Control, and (e) Environmental Control. Distribution of funds is being handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. The first of these solicitations, referred to as the CAST II-Round 1 RFP, was issued on October 28, 2002. Thirty-eight proposals were received by the December 10, 2002 deadline for this RFP-eleven (11) Solid-Solid Separation, seven (7) Solid-Liquid Separation, ten (10) Chemical/Biological Extraction, six (6) Modeling & Control and four (4) Environmental Control. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. This process took some 7 months to complete but 17 projects (one joint) were in place at the constituent universities (three at Virginia Tech, two at West Virginia University, three at University of

  7. Follow on Research for Multi-Utility Technology Test Bed Aircraft at NASA Dryden Flight Research Center (FY13 Progress Report)

    Science.gov (United States)

    Pak, Chan-Gi

    2013-01-01

    Modern aircraft employ a significant fraction of their weight in composite materials to reduce weight and improve performance. Aircraft aeroservoelastic models are typically characterized by significant levels of model parameter uncertainty due to the composite manufacturing process. Small modeling errors in the finite element model will eventually induce errors in the structural flexibility and mass, thus propagating into unpredictable errors in the unsteady aerodynamics and the control law design. One of the primary objectives of Multi Utility Technology Test-bed (MUTT) aircraft is the flight demonstration of active flutter suppression, and therefore in this study, the identification of the primary and secondary modes for the structural model tuning based on the flutter analysis of MUTT aircraft. The ground vibration test-validated structural dynamic finite element model of the MUTT aircraft is created in this study. The structural dynamic finite element model of MUTT aircraft is improved using the in-house Multi-disciplinary Design, Analysis, and Optimization tool. In this study, two different weight configurations of MUTT aircraft have been improved simultaneously in a single model tuning procedure.

  8. Lewis Research Center battery overview

    Science.gov (United States)

    Odonnell, Patricia

    1993-01-01

    The topics covered are presented in viewgraph form and include the following: the Advanced Communications Technology Satellite; the Space Station Freedom (SSF) photovoltaic power module division; Ni/H2 battery and cell design; individual pressure vessel (IPV) nickel-hydrogen cell testing SSF support; the LeRC Electrochemical Technology Branch; improved design IPV nickel-hydrogen cells; advanced technology for IPV nickel-hydrogen flight cells; a lightweight nickel-hydrogen cell; bipolar nickel-hydrogen battery development and technology; aerospace nickel-metal hydride cells; the NASA Sodium-Sulfur Cell Technology Flight Experiment; and the lithium-carbon dioxide battery thermodynamic model.

  9. Space Technology Research Grants Program

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Technology Research Grants Program will accelerate the development of "push" technologies to support the future space science and exploration...

  10. Virginia Tech Center for Autism Research - Susan White perspective

    OpenAIRE

    White, Susan

    2012-01-01

    Highlights of the autism research of Susan White, Psychology professor and the co-director of the VT Autism clinic, are explained. Topics include anxiety, treatment development, ASD in adults, and biomarker pursuit. Fit of research of the clinic to the Center for Autism Research is explained, with potential for leadership in technology applications, environmental considerations, and interdisciplinary work.

  11. Patuxent Research Center 1986 Progress Report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report outlines the status of various research projects happening at the Patuxent Research Refuge and its research centers as of 1986. The report also provides...

  12. Finding the Most Efficient Technology Transfer Route Using Dijkstra Algorithm to Foster Innovation: The Case of Essential Oil Developments in the Research Center for Chemistry at the Indonesian Institute of Sciences

    Directory of Open Access Journals (Sweden)

    Arief Ameir Rahman Setiawan

    2016-07-01

    Full Text Available Innovation is one of the most critical issues in research institutions which can be performed through certain routes within the technology transfer mechanism. As the demands of research implementation are increasing, a better mechanism should be deployed to foster innovation. This study will investigate the possibilities for technology transfer mechanism improvements by (i identifying a number of steps required for innovation; (ii measuring the efficiency of each step; and (iii exploring the most efficient routes to innovate through the Dijkstra algorithm. Cases of research on essential oils and derivatives in the Research Center for Chemistry (RCC of the Indonesian Institute of Sciences (LIPI will be examined as the working example for the study. As a result of this study, a model containing a recommended sequence for the most efficient steps to innovation can be proposed. Using the proposed model, the efficiency rate of the technology transfer mechanism was increased twice, suggesting the possibility of stimulating innovation performance.

  13. Engineering research, development and technology report

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R T

    1999-02-01

    Nineteen ninety-eight has been a transition year for Engineering, as we have moved from our traditional focus on thrust areas to a more focused approach with research centers. These five new centers of excellence collectively comprise Engineering's Science and Technology program. This publication summarizes our formative year under this new structure. Let me start by talking about the differences between a thrust area and a research center. The thrust area is more informal, combining an important technology with programmatic priorities. In contrast, a research center is directly linked to an Engineering core technology. It is the purer model, for it is more enduring yet has the scope to be able to adapt quickly to evolving programmatic priorities. To put it another way, the mission of a thrust area was often to grow the programs in conjunction with a technology, whereas the task of a research center is to vigorously grow our core technologies. By cultivating each core technology, we in turn enable long-term growth of new programs.

  14. Biological Semiconductors | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's Cancer Diagnostic Program and the Food and Drug Administration's Center for Devices and Radiological Health is seeking statements of capability or interest from parties interested in collaborative research to further develop, evaluate, or commercialize biological semiconductors as diagnostic sensors.

  15. Nigerian Journal of Technological Research

    African Journals Online (AJOL)

    The Nigerian Journal of Technological Research is a pure scientific journal with a ... technology to its immediate environs and the international community. ... and communication Technology; Management and Entrepreneurship sciences.

  16. High Energy Astrophysics Science Archive Research Center

    Data.gov (United States)

    National Aeronautics and Space Administration — The High Energy Astrophysics Science Archive Research Center (HEASARC) is the primary archive for NASA missions dealing with extremely energetic phenomena, from...

  17. The National Homeland Security Research Center

    Data.gov (United States)

    Federal Laboratory Consortium — The National Homeland Security Research Center advances our nation's security by providing scientific products and expertise to improve the ability to respond to and...

  18. Accelerator Center for Energy Research (ACER)

    Data.gov (United States)

    Federal Laboratory Consortium — The Accelerator Center for Energy Research (ACER) exploits radiation chemistry techniques to study chemical reactions (and other phenomena) by subjecting samples to...

  19. Center Independent Research & Developments: JSC IRAD Program

    Data.gov (United States)

    National Aeronautics and Space Administration — JSC provides and applies its preeminent capabilities in science and technology to develop, operate, and integrate human exploration missions.  The center...

  20. GSDC: A Unique Data Center in Korea for HEP research

    Science.gov (United States)

    Ahn, Sang-Un

    2017-04-01

    Global Science experimental Data hub Center (GSDC) at Korea Institute of Science and Technology Information (KISTI) is a unique data center in South Korea established for promoting the fundamental research fields by supporting them with the expertise on Information and Communication Technology (ICT) and the infrastructure for High Performance Computing (HPC), High Throughput Computing (HTC) and Networking. GSDC has supported various research fields in South Korea dealing with the large scale of data, e.g. RENO experiment for neutrino research, LIGO experiment for gravitational wave detection, Genome sequencing project for bio-medical, and HEP experiments such as CDF at FNAL, Belle at KEK, and STAR at BNL. In particular, GSDC has run a Tier-1 center for ALICE experiment using the LHC at CERN since 2013. In this talk, we present the overview on computing infrastructure that GSDC runs for the research fields and we discuss on the data center infrastructure management system deployed at GSDC.

  1. Center Overview and UAV Highlights at NASA Ames Research Center

    Science.gov (United States)

    Feng, Deborah; Yan, Jerry Chi Yiu

    2017-01-01

    The PowerPoint presentation gives an overview of NASA Ames Research Center and its core competencies, as well as some of the highlights of Unmanned Aerial Vehicle (UAV) and Unmanned Aircraft Systems (UAS) accomplishments and innovations by researchers at Ames.

  2. Publications in academic medical centers: technology-facilitated culture clash.

    Science.gov (United States)

    Berner, Eta S

    2014-05-01

    Academic culture has a set of norms, expectations, and values that are sometimes tacit and sometimes very explicit. In medical school and other health professions educational settings, probably the most common norm includes placing a high value on peer-reviewed research publications, which are seen as the major evidence of scholarly productivity. Other features of academic culture include encouraging junior faculty and graduate students to share their research results at professional conferences and lecturing with slides as a major way to convey information. Major values that faculty share with journal editors include responsible conduct of research and proper attribution of others' words and ideas. Medical school faculty also value technology and are often quick to embrace technological advances that can assist them in their teaching and research. This article addresses the effects of technology on three aspects of academic culture: education, presentations at professional meetings, and research publications.The technologies discussed include online instruction, dissemination of conference proceedings on the Internet, plagiarism-detection software, and new technologies deployed by the National Center for Biotechnology Information, the home of PubMed. The author describes how the ease of deploying new technologies without faculty changing their norms and behavior in the areas of teaching and research can lead to conflicts of values among key stakeholders in the academic medical community, including faculty, journal editors, and professional associations. The implications of these conflicts and strategies for managing them are discussed.

  3. Coral Research Data from NOAA's Undersea Research Center, Caribbean Marine Research Center, NOAA's Undersea Research Program (NURP)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Undersea Research Center for the Caribbean Marine Research Center, Perry Institure for Marine Science, for the Caribbean region explores and studies...

  4. New center for IT research

    Directory of Open Access Journals (Sweden)

    Larry R Dalton

    2002-09-01

    The motivation for creating such a center is quite obvious. Despite the ‘dot com’ crash, IT continues to be the fastest growing and dominant component of world economy. Computing power and the ability to rapidly move information around the world are, of course, important drivers of that IT economy.

  5. NASA Ames Research Center: An Overview

    Science.gov (United States)

    Tu, Eugene; Yan, Jerry Chi Yiu

    2017-01-01

    This overview of NASA Ames Research Center is intended to give the target audience of university students a general understanding of the mission, core competencies, and research goals of NASA and Ames.

  6. Center for Herbal Research on Colorectal Cancer

    Data.gov (United States)

    Federal Laboratory Consortium — Research Area: Herbs Program:Centers of Excellence for Research on CAM Description:Colorectal cancer is the third most common cancer and the third leading cause of...

  7. PROCEEDINGS OF THE 2003 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM, HELD AT THE 2003 NEW ENGLAND FUEL INSTITUTE CONVENTION AND 30TH NORTH AMERICAN HEATING AND ENERGY EXPOSITION, HYNES CONVENTION CENTER, PRUDENTIAL CENTER, BOSTON, MASSACHUSETTS, JUNE 9 - 10, 2003.

    Energy Technology Data Exchange (ETDEWEB)

    MCDONALD,R.J.

    2003-06-09

    This meeting is the sixteenth oilheat industry technology meeting held since 1984 and the third since the National Oilheat Research Alliance (NORA) was formed. This year's symposium is a very important part of the effort in technology transfer, which is supported by the Oilheat Research Fuel Flexibility Program under the United States Department of Energy, Distributed Energy and Electricity Reliability Program (DEER). The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. The conference provides a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector. The specific objectives of the conference are to: (1) Identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost effectively, reliably, and safely; (2) Foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation.

  8. Center for Renewable Energy and Alternative Transportation Technologies (CREATT)

    Energy Technology Data Exchange (ETDEWEB)

    Mackin, Thomas

    2012-06-30

    The Center for Renewable Energy and Alternative Transportation Technologies (CREATT) was established to advance the state of the art in knowledge and education on critical technologies that support a renewable energy future. Our research and education efforts have focused on alternative energy systems, energy storage systems, and research on battery and hybrid energy storage systems.This report details the Center's progress in the following specific areas: Development of a battery laboratory; Development of a demonstration system for compressed air energy storage; Development of electric propulsion test systems; Battery storage systems; Thermal management of battery packs; and Construction of a micro-grid to support real-world performance monitoring of a renewable energy system.

  9. Center for Prostate Disease Research

    Science.gov (United States)

    ... Robert A. Phillips Award and a Navy-wide Academic Research Competition Award by Paula Amann Published in ... BKA winners were LCDR Gabriel Santiago, MC (laboratory medicine), and LT Scott Wagner, MC (clinical medicine). RAP ...

  10. Tiger Team Assessment, Energy Technology Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Office Special Projects within the Office of Environment, Safety, and Health (EH) has the responsibility to conduct Tiger Team Assessments for the Secretary of Energy. This report presents the assessment of the buildings, facilities, and activities under the DOE/Rockwell Contract No. DE-AM03-76SF00700 for the Energy Technology Engineering Center (ETEC) and of other DOE-owned buildings and facilities at the Santa Susana Field Laboratory (SSFL) site in southeastern Ventura County, California, not covered under Contract No. DE-AM03-76SF00700, but constructed over the years under various other contracts between DOE and Rockwell International. ETEC is an engineering development complex operated for DOE by the Rocketdyne Division of Rockwell International Corporation. ETEC is located within SSFL on land owned by Rockwell. The balance of the SSFL complex is owned and operated by Rocketdyne, with the exception of a 42-acre parcel owned by the National Aeronautics and Space Administration (NASA). The primary mission of ETEC is to provide engineering, testing, and development of components related to liquid metals technology and to conduct applied engineering development of emerging energy technologies.

  11. Center for Computing Research Summer Research Proceedings 2015.

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, Andrew Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Parks, Michael L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-18

    The Center for Computing Research (CCR) at Sandia National Laboratories organizes a summer student program each summer, in coordination with the Computer Science Research Institute (CSRI) and Cyber Engineering Research Institute (CERI).

  12. National Center on Sleep Disorders Research

    Science.gov (United States)

    ... Clinical Practice Guidelines Resources Continuing Education Funding Training & Career Development Division of Intramural Research Research Resources Scientific Reports Technology Transfer What are Clinical Trials? Children & Clinical Studies NHLBI Trials Clinical Trial Websites Press ...

  13. DOE - BES Nanoscale Science Research Centers (NSRCs)

    Energy Technology Data Exchange (ETDEWEB)

    Beecher, Cathy Jo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-11-14

    These are slides from a powerpoint shown to guests during tours of Center for Integrated Nanotechnologies (CINT) at Los Alamos National Laboratory. It shows the five DOE-BES nanoscale science research centers (NSRCs), which are located at different national laboratories throughout the country. Then it goes into detail specifically about the Center for Integrated Nanotechnologies at LANL, including statistics on its user community and CINT's New Mexico industrial users.

  14. Instructional Technology: The Research Field.

    Science.gov (United States)

    Gagne, Robert M.

    1986-01-01

    Reflects upon opportunities for research in instructional technology provided by present state of media hardware technology and educational requirements. Prospects for research in incidental learning, including learning from television, are discussed, as well as traditional learning research on intentional learning, including possibilities for…

  15. KSC Education Technology Research and Development Plan

    Science.gov (United States)

    Odell, Michael R. L.

    2003-01-01

    Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

  16. Research Centers: Ecstasies & Agonies [in HRD].

    Science.gov (United States)

    1995

    These four papers are from a symposium facilitated by Gene Roth on research centers at the 1995 Academy of Human Resource Development (HRD) conference. "Research: The Thin Blue Line between Rigor and Reality" (Michael Leimbach) discusses the need for HRD research to increase its speed and rigor and help organizations focus on capability modeling…

  17. Center for Drug Evaluation and Research

    Data.gov (United States)

    Federal Laboratory Consortium — The Center for Drug Evaluation and Research(CDER) performs an essential public health task by making sure that safe and effective drugs are available to improve the...

  18. THE CENTER FOR MILITARY BIOMECHANICS RESEARCH

    Data.gov (United States)

    Federal Laboratory Consortium — The Center for Military Biomechanics Research is a 7,500 ft2 dedicated laboratory outfitted with state-of-the-art equipment for 3-D analysis of movement, measurement...

  19. National Center on Sleep Disorders Research

    Science.gov (United States)

    ... Resources Register for Updates The National Center on Sleep Disorders Research (NCSDR) Located within the National Heart, Lung, ... 60 percent have a chronic disorder. Each year, sleep disorders, sleep deprivation, and sleepiness add an estimated $15. ...

  20. Johns Hopkins Particulate Matter Research Center

    Data.gov (United States)

    Federal Laboratory Consortium — The Johns Hopkins Particulate Matter Research Center will map health risks of PM across the US based on analyses of national databases on air pollution, mortality,...

  1. Research Supporting Satellite Communications Technology

    Science.gov (United States)

    Horan Stephen; Lyman, Raphael

    2005-01-01

    This report describes the second year of research effort under the grant Research Supporting Satellite Communications Technology. The research program consists of two major projects: Fault Tolerant Link Establishment and the design of an Auto-Configurable Receiver. The Fault Tolerant Link Establishment protocol is being developed to assist the designers of satellite clusters to manage the inter-satellite communications. During this second year, the basic protocol design was validated with an extensive testing program. After this testing was completed, a channel error model was added to the protocol to permit the effects of channel errors to be measured. This error generation was used to test the effects of channel errors on Heartbeat and Token message passing. The C-language source code for the protocol modules was delivered to Goddard Space Flight Center for integration with the GSFC testbed. The need for a receiver autoconfiguration capability arises when a satellite-to-ground transmission is interrupted due to an unexpected event, the satellite transponder may reset to an unknown state and begin transmitting in a new mode. During Year 2, we completed testing of these algorithms when noise-induced bit errors were introduced. We also developed and tested an algorithm for estimating the data rate, assuming an NRZ-formatted signal corrupted with additive white Gaussian noise, and we took initial steps in integrating both algorithms into the SDR test bed at GSFC.

  2. Together with Research Centers and Universities

    Directory of Open Access Journals (Sweden)

    Nuno Domingos Garrido

    2016-10-01

    Full Text Available The Journal Motricidade has always been walking in parallel with the scientific communities. We found that the affiliation of most authors has, nearly always, a University (Uni or a Research Center (RC. In fact it is almost impossible to conduct research outside these two universes. In this sense, Uni and RC feed the most, if not all, of scientific journals worldwide. By this I mean that is in the interest of Motricidade to be associated with high-quality RC and Uni equally recognized. With regard to RC, Motricidade will publish this year a supplement of the International Congress of Research Centre in Sports Sciences, Health Sciences and Human Development (CIDESD. This RC has conducted research in a variety of areas within the Sport Sciences and Health and always with high recognition and associated publications. It was not by chance that this RC was evaluated with ‘very good’ by the Portuguese Foundation for Science and Technology (FCT panel and has been granted funding. This Congress, which takes place every two years, targets to converge research and high level practices within these three areas: Sports, Health and Human Development. The 2016 CIDESD edition is dedicated to "Exercise and Health, Sports and Human Development" and will be held at the University of Évora, between 11 and 12 November of 2016. The readers can check the program in the following link http://gdoc.uevora.pt/450120 and get more information in the Congress Site available at http://www.cidesd2016.uevora.pt/. With regard to Uni, Motricidade signed a cooperation protocol with the University of Beira Interior (UBI in May of 2016, involving the development and dissemination of scientific knowledge in Sports Sciences, Psychology, Human Development and Health. At the present, UBI hosts more than 6,000 students spread across five faculties - Arts & Letters, Sciences, Health Sciences, Humanities and Social Sciences and Engineering. When looking at the rankings, for instance

  3. Second Annual Research Center for Optical Physics (RCOP) Forum

    Science.gov (United States)

    Allario, Frank (Editor); Temple, Doyle (Editor)

    1995-01-01

    The Research Center for Optical Physics (RCOP) held its Second Annual Forum on September 23-24, 1994. The forum consisted of two days of technical sessions with invited talks, submitted talks, and a student poster session. Participants in the technical sessions included students and researchers from CCNY/CUNY, Fisk University, Georgia Institute of Technology, Hampton University, University of Maryland, the Univeristy of Michigan, NASA Langley Research Center, North Caroline A and T University, Steven's Institute of Technology, and NAWC-Warminster. Topics included chaotic lasers, pumped optical filters, nonlinear responses in polythiophene and thiophene based thin films, crystal growth and spectroscopy, laser-induced photochromic centers, raman scattering in phorphyrin, superradiance, doped fluoride crystals, luminescence of terbium in silicate glass, and radiative and nonradiative transitions in rare-earth ions.

  4. Creating a National Astronomical Research Center of International Prestige

    Institute of Scientific and Technical Information of China (English)

    The inauguration and growth of the National Astron

    2006-01-01

    @@ Ⅰ. The Creation of an Tntegrated Astronomical Research Center Following the launch of the CAS's Knowledge Innovation Program (KIP) pilot project in 1998, it was formally decided in April 1999 to merge the following CAS institutions: five astronomical observatories (Beijing Observatory, Purple Mountain Observatory,Shanghai Observatory, Yunnan Observatory and Shaanxi Observatory), three research stations (Urumqi Astronomical Observatory, Changchun Astronomical Observatory and Guangdong Satellite Observation Station) and one research institute (Nanjing Institute of Optics and Technology); into a new entity, to be known initially as the National Center for Astronomical Observations.

  5. SciDAC visualization and analytics center for enabling technology

    Energy Technology Data Exchange (ETDEWEB)

    Bethel, E Wes [Computing Sciences Division, Lawrence Berkeley National Laboratory, The University of California, Berkeley, CA 94720-8139 (United States); Johnson, Chris [Scientific Computing and Imaging Institute, University of Utah, 72 S. Central Campus Drive, Salt Lake City, UT 84112 (United States); Joy, Ken [Institute for Data Analysis and Visualization, University of California, One Shields Avenue, Davis, CA 95616-8562 (United States); Ahern, Sean [National Center for Computational Sciences, Oak Ridge National Laboratory, One Bethel Valley Road, PO Box 2008 MS-6016, Oak Ridge, TN 37831 (United States); Pascucci, Valerio [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Childs, Hank [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Cohen, Jonathan; Duchaineau, Mark [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Hamann, Bernd [Institute for Data Analysis and Visualization, University of California, One Shields Avenue, Davis, CA 95616-8562 (United States); Hansen, Charles; Parker, Steven; Silva, Claudio; Sanderson, Allen; Tricoche, Xavier [Scientific Computing and Imaging Institute, University of Utah, 72 S. Central Campus Drive, Salt Lake City, UT 84112 (United States); Laney, Dan [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Lindstrom, Peter [Center for Applied Scientific Computing, Lawrence Livermore National Laboratory, PO Box 808, L-561, Livermore, CA 94551 (United States); Meredith, Jeremy; Ostrouchov, George [National Center for Computational Sciences, Oak Ridge National Laboratory, One Bethel Valley Road, PO Box 2008 MS-6016, Oak Ridge, TN 37831 (United States)

    2007-07-15

    The Visualization and Analytics Center for Enabling Technologies (VACET) focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an 'information big bang,' which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision of VACET is to adapt, extend, create when necessary, and deploy visual data analysis solutions that are responsive to the needs of DOE's computational and experimental scientists. Our center is engineered to be directly responsive to those needs and to deliver solutions for use in DOE's large open computing facilities. The research and development directly target data understanding problems provided by our scientific application stakeholders. VACET draws from a diverse set of visualization technology ranging from production quality applications and application frameworks to state-of-the-art algorithms for visualization, analysis, analytics, data manipulation, and data management.

  6. Biosurveillance at the United States Meat Animal Research Center

    Science.gov (United States)

    The mission of the 50 scientists and 165 support staff at the U.S. Meat Animal Research Center (USMARC) is to develop new technologies to increase the efficiency of livestock production and improve meat safety, quality, and animal health to benefit consumers worldwide. The facilities include 35,000 ...

  7. NASA Johnson Space Center SBIR STTR Program Technology Innovations

    Science.gov (United States)

    Krishen, Kumar

    2007-01-01

    The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

  8. Research imaging in an academic medical center.

    Science.gov (United States)

    Armato, Samuel G; Gruszauskas, Nicholas P; Macmahon, Heber; Torno, Michael D; Li, Feng; Engelmann, Roger M; Starkey, Adam; Pudela, Caileigh L; Marino, Jonathan S; Santiago, Faustino; Chang, Paul J; Giger, Maryellen L

    2012-06-01

    Managing and supervising the complex imaging examinations performed for clinical research in an academic medical center can be a daunting task. Coordinating with both radiology and research staff to ensure that the necessary imaging is performed, analyzed, and delivered in accordance with the research protocol is nontrivial. The purpose of this communication is to report on the establishment of a new Human Imaging Research Office (HIRO) at our institution that provides a dedicated infrastructure to assist with these issues and improve collaborations between radiology and research staff. The HIRO was created with three primary responsibilities: 1) coordinate the acquisition of images for clinical research per the study protocol, 2) facilitate reliable and consistent assessment of disease response for clinical research, and 3) manage and distribute clinical research images in a compliant manner. The HIRO currently provides assistance for 191 clinical research studies from 14 sections and departments within our medical center and performs quality assessment of image-based measurements for six clinical research studies. The HIRO has fulfilled 1806 requests for medical images, delivering 81,712 imaging examinations (more than 44.1 million images) and related reports to investigators for research purposes. The ultimate goal of the HIRO is to increase the level of satisfaction and interaction among investigators, research subjects, radiologists, and other imaging professionals. Clinical research studies that use the HIRO benefit from a more efficient and accurate imaging process. The HIRO model could be adopted by other academic medical centers to support their clinical research activities; the details of implementation may differ among institutions, but the need to support imaging in clinical research through a dedicated, centralized initiative should apply to most academic medical centers. Copyright © 2012 AUR. Published by Elsevier Inc. All rights reserved.

  9. National Wind Technology Center sitewide, Golden, CO: Environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The National Renewable Energy Laboratory (NREL), the nation`s primary solar and renewable energy research laboratory, proposes to expand its wind technology research and development program activities at its National Wind Technology Center (NWTC) near Golden, Colorado. NWTC is an existing wind energy research facility operated by NREL for the US Department of Energy (DOE). Proposed activities include the construction and reuse of buildings and facilities, installation of up to 20 wind turbine test sites, improvements in infrastructure, and subsequent research activities, technology testing, and site operations. In addition to wind turbine test activities, NWTC may be used to support other NREL program activities and small-scale demonstration projects. This document assesses potential consequences to resources within the physical, biological, and human environment, including potential impacts to: air quality, geology and soils, water resources, biological resources, cultural and historic resources, socioeconomic resources, land use, visual resources, noise environment, hazardous materials and waste management, and health and safety conditions. Comment letters were received from several agencies in response to the scoping and predecisional draft reviews. The comments have been incorporated as appropriate into the document with full text of the letters contained in the Appendices. Additionally, information from the Rocky Flats Environmental Technology Site on going sitewide assessment of potential environmental impacts has been reviewed and discussed by representatives of both parties and incorporated into the document as appropriate.

  10. Research and technology, fiscal year 1983

    Science.gov (United States)

    1983-01-01

    The responibilities and programs of the Goddard Space Flight Center are ranged from basic research in the space and Earth sciences through the management of numerous flight projects to operational responsibility for the tracking of and data acquisition from NASA's Earth orbiting satellites, Progress in the areas of spacecraft technology, sensor development and data system development, as well as in the basic and applied to research in the space and Earth sciences that they support is highlighted.

  11. Center for BioBased Binders and Pollution Reduction Technology

    Energy Technology Data Exchange (ETDEWEB)

    Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)

    2013-07-01

    Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.

  12. Wave Energy Research, Testing and Demonstration Center

    Energy Technology Data Exchange (ETDEWEB)

    Batten, Belinda [Oregon State Univ., Corvallis, OR (United States)

    2014-09-30

    The purpose of this project was to build upon the research, development and testing experience of the Northwest National Marine Renewable Energy Center (NNMREC) to establish a non-grid connected open-ocean testing facility for wave energy converters (WECs) off the coast of Newport, Oregon. The test facility would serve as the first facility of its kind in the continental US with a fully energetic wave resource where WEC technologies could be proven for west coast US markets. The test facility would provide the opportunity for self-contained WEC testing or WEC testing connected via an umbilical cable to a mobile ocean test berth (MOTB). The MOTB would act as a “grid surrogate” measuring energy produced by the WEC and the environmental conditions under which the energy was produced. In order to realize this vision, the ocean site would need to be identified through outreach to community stakeholders, and then regulatory and permitting processes would be undertaken. Part of those processes would require environmental baseline studies and site analysis, including benthic, acoustic and wave resource characterization. The MOTB and its myriad systems would need to be designed and constructed.The first WEC test at the facility with the MOTB was completed within this project with the WET-NZ device in summer 2012. In summer 2013, the MOTB was deployed with load cells on its mooring lines to characterize forces on mooring systems in a variety of sea states. Throughout both testing seasons, studies were done to analyze environmental effects during testing operations. Test protocols and best management practices for open ocean operations were developed. As a result of this project, the non-grid connected fully energetic WEC test facility is operational, and the MOTB system developed provides a portable concept for WEC testing. The permitting process used provides a model for other wave energy projects, especially those in the Pacific Northwest that have similar

  13. Center for Global Health announces grants to support portable technologies

    Science.gov (United States)

    NCI's Center for Global Health announced grants that will support the development and validation of low-cost, portable technologies. These technologies have the potential to improve early detection, diagnosis, and non-invasive or minimally invasive treatm

  14. INVISTA Establishes Research Center in Mainland China Its First Textile

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    On July 25, 2012, INVISTA announced the opening of its first textile research center in Mainland China, demonstrating its continued commitment to developing high-value, innovative technologies and products. The $7.3 million, 3,000 sqm center is the company's first investment in textile research at such scale in Mainland, China, and the fourth facility of its kind to be established by INVlSTA anywhere in the world. The other three existing facilities are located in the United States, Italy and Taiwan.

  15. Applied technology center business plan and market survey

    Science.gov (United States)

    Hodgin, Robert F.; Marchesini, Roberto

    1990-01-01

    Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

  16. Scientific and educational center "space systems and technology"

    Science.gov (United States)

    Kovalev, I. V.; Loginov, Y. Y.; Zelenkov, P. V.

    2015-10-01

    The issues of engineers training in the aerospace university on the base of Scientific and Educational Center "Space Systems and Technology" are discussed. In order to improve the quality of education in the Siberian State Aerospace University the research work of students, as well as the practice- oriented training of engineers are introduced in the educational process. It was made possible as a result of joint efforts of university with research institutes of the Russian Academy of Science and industrial enterprises. The university experience in this area promotes the development of a new methods and forms of educational activities, including the project-oriented learning technologies, identifying promising areas of specialization and training of highly skilled engineers for aerospace industry and other institutions. It also allows you to coordinate the work of departments and other units of the university to provide the educational process in workshops and departments of the industrial enterprises in accordance with the needs of the target training. Within the framework of scientific and education center the students perform researches, diploma works and master's theses; the postgraduates are trained in advanced scientific and technical areas of enterprise development.

  17. Center for Research on Infrared Detectors (CENTROID)

    Science.gov (United States)

    2006-09-30

    Average carper energy in a bound-to-continuum detector for va:rious val- ue~ of tow-field capture tillllt . Figure 5. Results of Monte Carlo studies...Orlando and Santa Barbara Focal Plane in the realization of QDIP-based IR cameras. We have fabricated and shipped 320x256 QDIP arrays to them for...International Science Center HRL Laboratories Texas Instruments/DRS Technologies EPIR Limited Lockheed Martin Santa Barbara Focalplane BAE Systems AFRL

  18. Gear and Transmission Research at NASA Lewis Research Center

    Science.gov (United States)

    Townsend, Dennis P.

    1997-01-01

    This paper is a review of some of the research work of the NASA Lewis Research Center Mechanical Components Branch. It includes a brief review of the NASA Lewis Research Center and the Mechanical Components Branch. The research topics discussed are crack propagation of gear teeth, gear noise of spiral bevel and other gears, design optimization methods, methods we have investigated for transmission diagnostics, the analytical and experimental study of gear thermal conditions, the analytical and experimental study of split torque systems, the evaluation of several new advanced gear steels and transmission lubricants and the evaluation of various aircraft transmissions. The area of research needs for gearing and transmissions is also discussed.

  19. New thermal neutron prompt {gamma}-ray activation analysis instrument at the National Institute of Standards and Technology Center for Neutron Research

    Energy Technology Data Exchange (ETDEWEB)

    Mackey, E.A. E-mail: lmackey@nist.gov; Anderson, D.L.; Liposky, P.J.; Lindstrom, R.M.; Chen-Mayer, H.; Lamaze, G.P

    2004-11-01

    A new thermal neutron prompt {gamma}-ray activation analysis (PGAA) instrument was designed and built to replace the original PGAA system at the NIST Center for Neutron Research. By placing a sapphire filter in the neutron beam shutter assembly, the fast neutron fluence rate was reduced by a factor of 5 and low-energy (50-200 keV) {gamma}-ray intensities were reduced by factors of 5-10. The thermal neutron fluence rate was reduced by only a factor of 1.13. A new external beam tube, sample chamber, beam stop, and support structure were built and a new detection system installed. The new beam tube is made of two cylindrical aluminum sections lined with a lithiated polymer. Both sections are kept under vacuum to reduce the number of neutrons scattered by air into the beam tube walls. The sample chamber is also fabricated from aluminum and lined with lithiated polymer, and may be evacuated to minimize the number of neutrons scattered and absorbed by air. The beam tube and sample chamber assembly is suspended from the aluminum support structure. The detection system consists of a 40% efficient (relative) germanium detector (resolution 2.0 at 1332.5 keV) and a bismuth germanate Compton suppressor. The detection system is shielded by lead, surrounded by borated and lithiated polyethylene, and placed on a table attached to the support structure. The new, more compact beam stop is welded to the support structure. Capture {gamma}-ray photopeaks from H, B, C, N, Na, Al, Fe, Ge, I and Pb in the background spectrum were either of lower intensity or eliminated with the new PGAA instrument. The more efficient detection system, positioned closer to the sample, yielded element sensitivity increases of 5-50%. Limits of detection have been greatly reduced compared with those of the original instrument due to reduced Compton and scattered {gamma}-ray backgrounds (especially in the low-energy region), increased sensitivities, and reduction of background {gamma}-ray photopeak

  20. [Activities of Goddard Earth Sciences and Technology Center, Maryland University

    Science.gov (United States)

    2003-01-01

    The Goddard Space Flight Center (GSFC) is recognized as a world leader in the application of remote sensing and modeling aimed at improving knowledge of the Earth system. The Goddard Earth Sciences Directorate plays a central role in NASA's Earth Observing System and the U.S. Global Change Research Program. Goddard Earth Sciences and Technology (GEST) is organized as a cooperative agreement with the GSFC to promote excellence in the Earth sciences, and is a consortium of universities and corporations (University of Maryland Baltimore County, Howard University, Hampton University, Caelum Research Corporation and Northrop Grumman Corporation). The aim of this new program is to attract and introduce promising students in their first or second year of graduate studies to Oceanography and Earth system science career options through hands-on instrumentation research experiences on coastal processes at NASA's Wallops Flight Facility on the Eastern Shore of Virginia.

  1. Energy Frontier Research Centers: Impact Report, January 2017

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-01-31

    Since its inception in 2009, the U. S. Department of Energy’s Energy Frontier Research Center (EFRC) program has become an important research modality in the Department’s portfolio, enabling high impact research that addresses key scientific challenges for energy technologies. Funded by the Office of Science’s Basic Energy Sciences program, the EFRCs are located across the United States and are led by universities, national laboratories, and private research institutions. These multi-investigator, multidisciplinary centers bring together world-class teams of researchers, often from multiple institutions, to tackle the toughest scientific challenges preventing advances in energy technologies. The EFRCs’ fundamental scientific advances are having a significant impact that is being translated to industry. In 2009 five-year awards were made to 46 EFRCs, including 16 that were fully funded by the American Recovery and Reinvestment Act (ARRA). An open recompetition of the program in 2014 resulted in fouryear awards to 32 centers, 22 of which are renewals of existing EFRCs and 10 of which are new EFRCs. In 2016, DOE added four new centers to accelerate the scientific breakthroughs needed to support the Department’s environmental management and nuclear cleanup mission, bringing the total number of active EFRCs to 36. The impact reports in this document describe some of the many scientific accomplishments and greater impacts of the class of 2009 – 2018 EFRCs and early outcomes from a few of the class of 2014 – 2018 EFRCs.

  2. CCR Interns | Center for Cancer Research

    Science.gov (United States)

    The CCR "Cancer Research Interns" Program was inaugurated in 2004 to increase the diversity of trainee applicants to the CCR. We have placed 314 students from 2004 to 2016, in labs and branches across the Center for Cancer Research. The CCR Office of Training and Education provides the training dollars, some Service & Supply funds, and travel support for those students who meet the financial eligibility criteria (View/print the 2017 flier).

  3. Alexander Putman | Center for Cancer Research

    Science.gov (United States)

    Alexander Putman, PhD December 6 Pharmacologist Division of Hematology Oncology Toxicology Office of New Drugs Center for Drug Evaluation and Research U.S. Food and Drug Administration Topic: “Role of a pharmacology/toxicology reviewer at the U.S. Food and Drug Administration”

  4. Center Funding Research on Math, Science Cognition

    Science.gov (United States)

    Cavanagh, Sean

    2006-01-01

    Four years ago, federal officials launched an initiative to study mathematics and science cognition. Since then, that program has begun to exert its influence through the relatively modest but steady flow of public funding it provides for scholarly research. In this article, the author features the federal center entitled, Program on Mathematics…

  5. Research and technology Fiscal Year 1985 report

    Science.gov (United States)

    Speer, F.

    1985-01-01

    A quarter of a century is but a moment on the cosmic calendar. Now that Marshall Space Flight Center has reached its 25th Anniversity, it seems just moments ago that President Dwight D. Eisenhower stood on these grounds and formally dedicated the George C. Marshall Space Flight Center in Huntsville, Alabama. The Fiscal Year 1985 Research and Technology Report reflects the wide spectrum of activities closely linked with the Center's mainstream spaceflight developments. Past accomplishments testify to the success of getting deeply involved in the science and technology of its projects - 32 Saturn launches, Pegasus, the Skylab missions, three High Energy Astronomy Observatory missions, the Apollo - Soyuz mission, and an accelerating schedule of successful Shuttle, Spacelab, and Shuttle payload missions. The Center continues to be involved in engineering development, scientific research, and technology. At the beginning of the second quarter century, the experience and dedication of the engineers and scientists, and the success of the collaboration with industry and academia will now be aimed at the next great endeavor, the Space Station.

  6. User research & technology, pt.2

    CERN Document Server

    Greifeneder, Elke

    2011-01-01

    This e-book is Part 2 on the theme "User Research and Technology". The research covers the testing of online digital library resources using various methods. Library and information science as a field is changing and the requirements for top quality research are growing more stringent. This is typical of the experience of other professional fields as they have moved from practitioners advising practitioners to researchers building on past results. This e-book contains 12 papers on this theme.

  7. Successes of Small Business Innovation Research at NASA Glenn Research Center

    Science.gov (United States)

    Kim, Walter S.; Bitler, Dean W.; Prok, George M.; Metzger, Marie E.; Dreibelbis, Cindy L.; Ganss, Meghan

    2002-01-01

    This booklet of success stories highlights the NASA Glenn Research Center's accomplishments and successes by the Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) Programs. These success stories are the results of selecting projects that support NASA missions and also have high commercialization potential. Each success story describes the innovation accomplished, commercialization of the technology, and further applications and usages. This booklet emphasizes the integration and incorporation of technologies into NASA missions and other government projects. The company name and the NASA contact person are identified to encourage further usage and application of the SBIR developed technologies and also to promote further commercialization of these products.

  8. The role of architectural research centers in addressing climate change

    Directory of Open Access Journals (Sweden)

    John Carmody

    2012-10-01

    Full Text Available ABSTRACT: It is clear that an urgent, major transformation needs to happen in the design of the built environment to respond to impending climate change and other environmental degradation. This paper will explain the potential role of architectural research centers in this transformation and provide examples from the Center for Sustainable Building Research (CSBR at the University of Minnesota. A research center can become a regional hub to coordinate and disseminate critical information. CSBR is leading the establishment of Architecture 2030 standards in Minnesota, assisting local governments in writing green building policy, providing design assistance to local government, developing tools to assist design decision making, providing technical assistance to the affordable housing community inMinnesota, and establishing a regional case study database that includes actual performance information. CSBR is creating a publicly accessible, credible knowledge base on new approaches, technologies and actual performance outcomes. Research centers such as CSBR can be a critical component of the necessary feedback loop often lacking in the building industry. A research center can also fill major gaps in providing in depth professional education as well as be a catalyst for demonstration projects and public education.

  9. Space and nuclear research and technology

    Science.gov (United States)

    1975-01-01

    A fact sheet is presented on the space and nuclear research and technology program consisting of a research and technology base, system studies, system technology programs, entry systems technology, and experimental programs.

  10. Thermal Desorption/Ultraviolet Photolysis Process Technology Research, Test, and Evaluation Performed at the Naval Construction Battalion Center, Gulfport, Mississippi, for the USAF Installation Restoration Program. Volume 2

    Science.gov (United States)

    1987-12-01

    packed in ice. Sampling of vent gas and off- gases from the two thermal desorption technologies will be performie using procedures and techniques...solvent used in it. wash with hot voat Cenaslunug detergent.. inse with copioua aMunts of tap water and severa2 portioc of distilled voter. Drain d4y

  11. Emerging Technologies: Applications and Implications for School Library Media Centers.

    Science.gov (United States)

    Craver, Kathleen W.

    This paper examines emerging information technologies and their implications for school library media centers. Because of the fluctuating situation regarding new innovations, only emerging technologies that specialists believe will occur within the next 5 to 10 years are discussed. For each technology mentioned, a brief description is given…

  12. Animal Resource Program | Center for Cancer Research

    Science.gov (United States)

    CCR Animal Resource Program The CCR Animal Resource Program plans, develops, and coordinates laboratory animal resources for CCR’s research programs. We also provide training, imaging, and technology development in support of moving basic discoveries to the clinic. The ARP Manager:

  13. Inauguration of the Stoll Fashion & Technology Center

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ On April 1st 2009 the new Stoll Fashion & Technology showroom will be opened in New York.The new showroom is situated in the heart of the Garment District of Manhattan,New York and will present the opportunity to gain hands-on experience to the services of the Stoll Fashion & Technology world.The highlight of the inauguration at the 15.000 square feet showroom will be the introduction to the reinvented service approach as well as innovative projects under the Stoll Fashion & Technology Company.

  14. Data Curation Education in Research Centers (DCERC)

    Science.gov (United States)

    Marlino, M. R.; Mayernik, M. S.; Kelly, K.; Allard, S.; Tenopir, C.; Palmer, C.; Varvel, V. E., Jr.

    2012-12-01

    Digital data both enable and constrain scientific research. Scientists are enabled by digital data to develop new research methods, utilize new data sources, and investigate new topics, but they also face new data collection, management, and preservation burdens. The current data workforce consists primarily of scientists who receive little formal training in data management and data managers who are typically educated through on-the-job training. The Data Curation Education in Research Centers (DCERC) program is investigating a new model for educating data professionals to contribute to scientific research. DCERC is a collaboration between the University of Illinois at Urbana-Champaign Graduate School of Library and Information Science, the University of Tennessee School of Information Sciences, and the National Center for Atmospheric Research. The program is organized around a foundations course in data curation and provides field experiences in research and data centers for both master's and doctoral students. This presentation will outline the aims and the structure of the DCERC program and discuss results and lessons learned from the first set of summer internships in 2012. Four masters students participated and worked with both data mentors and science mentors, gaining first hand experiences in the issues, methods, and challenges of scientific data curation. They engaged in a diverse set of topics, including climate model metadata, observational data management workflows, and data cleaning, documentation, and ingest processes within a data archive. The students learned current data management practices and challenges while developing expertise and conducting research. They also made important contributions to NCAR data and science teams by evaluating data management workflows and processes, preparing data sets to be archived, and developing recommendations for particular data management activities. The master's student interns will return in summer of 2013

  15. NDE Software Developed at NASA Glenn Research Center

    Science.gov (United States)

    Roth, Donald J.; Martin, Richard E.; Rauser, Richard W.; Nichols, Charles; Bonacuse, Peter J.

    2014-01-01

    NASA Glenn Research Center has developed several important Nondestructive Evaluation (NDE) related software packages for different projects in the last 10 years. Three of the software packages have been created with commercial-grade user interfaces and are available to United States entities for download on the NASA Technology Transfer and Partnership Office server (https://sr.grc.nasa.gov/). This article provides brief overviews of the software packages.

  16. Marshall Space Flight Center ECLSS technology activities

    Science.gov (United States)

    Wieland, Paul

    1990-01-01

    Viewgraphs on Environmental Control and Life Support System (ECLSS) technology activities are presented. Topics covered include: analytical development; ECLSS modeling approach; example of water reclamation modeling needs; and hardware development and testing.

  17. Molecular Science Research Center 1992 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Knotek, M.L.

    1994-01-01

    The Molecular Science Research Center is a designated national user facility, available to scientists from universities, industry, and other national laboratories. After an opening section, which includes conferences hosted, appointments, and projects, this document presents progress in the following fields: chemical structure and dynamics; environmental dynamics and simulation; macromolecular structure and dynamics; materials and interfaces; theory, modeling, and simulation; and computing and information sciences. Appendices are included: MSRC staff and associates, 1992 publications and presentations, activities, and acronyms and abbreviations.

  18. Final priority; National Institute on Disability and Rehabilitation Research--Disability and Rehabilitation Research Projects and Centers Program--Rehabilitation Engineering Research Centers. Final priority.

    Science.gov (United States)

    2013-06-14

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority for a Rehabilitation Engineering Research Center (RERC) on Universal Interfaces and Information Technology Access under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). The Assistant Secretary may use this priority for a competition in fiscal year (FY) 2013 and later years. We take this action to focus research attention on areas of national need. We intend to use this priority to improve outcomes for individuals with disabilities.

  19. Scientific Management Training | Center for Cancer Research

    Science.gov (United States)

    The NCI intramural program is one of the largest centers for cancer research in the world, with approximately 200 principal investigators and 500 postdoctoral fellows. While outstanding scientific research is conducted at NCI, many of the scientists who go on to lead their own laboratories have few management skills. The Scientific Management Training course focuses on personnel and project management. In the “Art of Supervision” section, the emphasis is on the uniqueness of each person and how each staff member should be treated to achieve desired outcomes.

  20. 76 FR 35223 - National Center for Research Resources; Notice of Closed Meeting

    Science.gov (United States)

    2011-06-16

    ... HUMAN SERVICES National Institutes of Health National Center for Research Resources; Notice of Closed... privacy. Name of Committee: National Center for Research Resources Special Emphasis Panel, Date: June 21... Technology; 93.389, Research Infrastructure, 93.306, 93.333; 93.702, ARRA Related Construction Awards...

  1. 75 FR 7487 - National Center for Research Resources; Notice of Closed Meetings

    Science.gov (United States)

    2010-02-19

    ... HUMAN SERVICES National Institutes of Health National Center for Research Resources; Notice of Closed... Biomedical Technology Research Resource. Date: March 15-18, 2010. Time: 8 a.m. to 5 p.m. Agenda: To review... of Committee: National Center for Research Resources Special Emphasis Panel; RCTR. Date: March 3...

  2. Research in the Division of Pharmaceutical Technology.

    Science.gov (United States)

    Junginger, H E

    1985-04-26

    Within the Center for Bio-Pharmaceutical Sciences the release characteristics of drugs form the major research object of the Division of Pharmaceutical Technology. Transdermal systems are being developed that can supply a drug during several days. Irritation of the skin may be avoided by using hydrogels. To enable long-term transdermal application also the colloidal structure of creams and ointments is investigated. As most drugs are to be taken orally, however, a research project was also started to make cheap and easy to produce controlled release tablets. The results with a microporous polypropylene polymer are promising.

  3. Personalized Integrated Educational System: Technology Functions for the Learner- Centered Paradigm of Education

    Science.gov (United States)

    Reigeluth, Charles M.; Aslan, Sinem; Chen, Zengguan; Dutta, Pratima; Huh, Yeol; Lee, Dabae; Lin, Chun-Yi; Lu, Ya-Huei; Min, Mina; Tan, Verily; Watson, Sunnie Lee; Watson, William R.

    2015-01-01

    The learner-centered paradigm of instruction differs in such fundamental ways from the teacher-centered paradigm that it requires technology to serve very different functions. In 2006, a research team at Indiana University began to work on identifying those functions and published their results in 2008. Subsequently, the team elaborated and…

  4. Second leader named at Center for Geospatial Information Technology

    OpenAIRE

    Trulove, Susan

    2006-01-01

    Stephen Prisley of Blacksburg, associate professor of forestry in the College of Natural Resources at Virginia Tech, will become the director of the university's Center for Geospatial Information Technology (CGIT) as of May 15.

  5. Mississippi State University Center for Air Sea Technology. FY93 and FY 94 Research Program in Navy Ocean Modeling and Prediction

    Science.gov (United States)

    1994-09-30

    model to the Navy. The Co-Principal Investigators are CAST researchers Dr. David E. Dietrich and Mr. Alberto Mestas - Nunez. With the Navy’s new...Applications Mr. Alberto Mestas -Nunez An Evaluation of ECMWF-Based 20 May 93 College of Oceanic Sci. Climatological Wind Stress Fields Oregon State...to assist in data browser applications. Oregon State UniversiLy. CAST employed graduate student Mr. Alberto Mestas - Nunez to assist in ocean modeling

  6. Savannah River Technology Center. Monthly report

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    This document contains information about the research programs being conducted at the Savannah River Plant. Topics of discussion include: thermal cycling absorption process, development of new alloys, ion exchange, oxalate precipitation, calcination, environmental research, remedial action, ecological risk assessments, chemical analysis of salt cakes, natural phenomena hazards assessment, and sampling of soils and groundwater.

  7. Research Progress of Isotope Technology

    Institute of Scientific and Technical Information of China (English)

    Department; of; Isotope

    2015-01-01

    Radioactive isotope is one of the origins of nonnuclear power technology.In the 12th Five Year Plan period,CIAE made breakthrough progresses on several important fields such as research and development of preparation of radioactive nuclides,preparation of radioactive source and study of radiopharmaceuticals relied on different financial support,successfully

  8. Technology in Education: Research Says!!

    Science.gov (United States)

    Canuel, Ron

    2011-01-01

    A large amount of research existed in the field of technology in the classroom; however, almost all was focused on the impact of desktop computers and the infamous "school computer room". However, the activities in a classroom represent a multitude of behaviours and interventions, including personal dynamics, classroom management and…

  9. Solar Energy Research Center Instrumentation Facility

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Thomas, J.; Papanikolas, John, P.

    2011-11-11

    SOLAR ENERGY RESEARCH CENTER INSTRUMENTATION FACILITY The mission of the Solar Energy Research Center (UNC SERC) at the University of North Carolina at Chapel Hill (UNC-CH) is to establish a world leading effort in solar fuels research and to develop the materials and methods needed to fabricate the next generation of solar energy devices. We are addressing the fundamental issues that will drive new strategies for solar energy conversion and the engineering challenges that must be met in order to convert discoveries made in the laboratory into commercially available devices. The development of a photoelectrosynthesis cell (PEC) for solar fuels production faces daunting requirements: (1) Absorb a large fraction of sunlight; (2) Carry out artificial photosynthesis which involves multiple complex reaction steps; (3) Avoid competitive and deleterious side and reverse reactions; (4) Perform 13 million catalytic cycles per year with minimal degradation; (5) Use non-toxic materials; (6) Cost-effectiveness. PEC efficiency is directly determined by the kinetics of each reaction step. The UNC SERC is addressing this challenge by taking a broad interdisciplinary approach in a highly collaborative setting, drawing on expertise across a broad range of disciplines in chemistry, physics and materials science. By taking a systematic approach toward a fundamental understanding of the mechanism of each step, we will be able to gain unique insight and optimize PEC design. Access to cutting-edge spectroscopic tools is critical to this research effort. We have built professionally-staffed facilities equipped with the state-of the-art instrumentation funded by this award. The combination of staff, facilities, and instrumentation specifically tailored for solar fuels research establishes the UNC Solar Energy Research Center Instrumentation Facility as a unique, world-class capability. This congressionally directed project funded the development of two user facilities: TASK 1: SOLAR

  10. 省地一体化客户呼叫中心设计与关键技术研究%Is the integration of customer call center design and key technology research

    Institute of Scientific and Technical Information of China (English)

    撒兴杰

    2015-01-01

    随着经济的飞速发展,生活、生产用电需求不断增加,95598呼叫中心作为电网公司对外服务的统一窗口,系统平台的可靠性至关重要.文章对贵州电网省地一体化95598呼叫中心进行了总体设计,并对其中的关键技术进行深入研究和实现,确保系统的稳定可靠,提高系统的服务质量.%with the rapid development of economy, production and life, the demand for electricity continues to increase, 95598 call center as a foreign power grid company unified window, the system reliability is very important. The of Guizhou power grid of province and region integration 95598 call center were overall design, and implement of the key technology research and im-plementation, to ensure that the system is stable and reliable, and improve the service quality of the system.

  11. Paleomagnetism of Basaltic Lava Flows in Coreholes ICPP 213, ICPP-214, ICPP-215, and USGS 128 Near the Vadose Zone Research Park, Idaho Nuclear Technology and Engineering Center, Idaho National Engineering and Environmental Laboratory, Idaho

    Science.gov (United States)

    Champion, Duane E.; Herman, Theodore C.

    2003-01-01

    A paleomagnetic study was conducted on basalt from 41 lava flows represented in about 2,300 ft of core from coreholes ICPP-213, ICPP-214, ICPP-215, and USGS 128. These wells are in the area of the Idaho Nuclear Technology and Engineering Center (INTEC) Vadose Zone Research Park within the Idaho National Engineering and Environmental Laboratory (INEEL). Paleomagnetic measurements were made on 508 samples from the four coreholes, which are compared to each other, and to surface outcrop paleomagnetic data. In general, subhorizontal lines of correlation exist between sediment layers and between basalt layers in the area of the new percolation ponds. Some of the basalt flows and flow sequences are strongly correlative at different depth intervals and represent important stratigraphic unifying elements. Some units pinch out, or thicken or thin even over short separation distances of about 1,500 ft. A more distant correlation of more than 1 mile to corehole USGS 128 is possible for several of the basalt flows, but at greater depth. This is probably due to the broad subsidence of the eastern Snake River Plain centered along its topographic axis located to the south of INEEL. This study shows this most clearly in the oldest portions of the cored sections that have differentially subsided the greatest amount.

  12. Center for Technology for Advanced Scientific Component Software (TASCS)

    Energy Technology Data Exchange (ETDEWEB)

    Damevski, Kostadin [Virginia State Univ., Petersburg, VA (United States)

    2009-03-30

    A resounding success of the Scientific Discover through Advanced Computing (SciDAC) program is that high-performance computational science is now universally recognized as a critical aspect of scientific discovery [71], complementing both theoretical and experimental research. As scientific communities prepare to exploit unprecedened computing capabilities of emerging leadership-class machines for multi-model simulations at the extreme scale [72], it is more important than ever to address the technical and social challenges of geographically distributed teams that combine expertise in domain science, applied mathematics, and computer science to build robust and flexible codes that can incorporate changes over time. The Center for Technology for Advanced Scientific Component Software (TASCS) tackles these issues by exploiting component-based software development to facilitate collaborative hig-performance scientific computing.

  13. Bioinformatics and Computational Core Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — SERVICES PROVIDED BY THE COMPUTER CORE FACILITYEvaluation, purchase, set up, and maintenance of the computer hardware and network for the 170 users in the research...

  14. Bioinformatics and Computational Core Technology Center

    Data.gov (United States)

    Federal Laboratory Consortium — SERVICES PROVIDED BY THE COMPUTER CORE FACILITY Evaluation, purchase, set up, and maintenance of the computer hardware and network for the 170 users in the research...

  15. Dinutuximab (Unituxin™) | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    In 2010, NCI entered into a Cooperative Research and Development Agreement (CRADA) with United Therapeutics Corp., under which the company assumed responsibility for manufacturing dinutuximab and moving it through the steps required for regulatory approval.

  16. University of Washington/ Northwest National Marine Renewable Energy Center Tidal Current Technology Test Protocol, Instrumentation, Design Code, and Oceanographic Modeling Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-11-452

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, Frederick R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    The University of Washington (UW) - Northwest National Marine Renewable Energy Center (UW-NNMREC) and the National Renewable Energy Laboratory (NREL) will collaborate to advance research and development (R&D) of Marine Hydrokinetic (MHK) renewable energy technology, specifically renewable energy captured from ocean tidal currents. UW-NNMREC is endeavoring to establish infrastructure, capabilities and tools to support in-water testing of marine energy technology. NREL is leveraging its experience and capabilities in field testing of wind systems to develop protocols and instrumentation to advance field testing of MHK systems. Under this work, UW-NNMREC and NREL will work together to develop a common instrumentation system and testing methodologies, standards and protocols. UW-NNMREC is also establishing simulation capabilities for MHK turbine and turbine arrays. NREL has extensive experience in wind turbine array modeling and is developing several computer based numerical simulation capabilities for MHK systems. Under this CRADA, UW-NNMREC and NREL will work together to augment single device and array modeling codes. As part of this effort UW NNMREC will also work with NREL to run simulations on NREL's high performance computer system.

  17. Evaluating an Assistive Technology Resource Center in Taiwan

    Science.gov (United States)

    Ho, Hua-Kuo

    2010-01-01

    The purpose of this article is intended to present the procedure and outcomes of an evaluation of the Assistive Technology Resource Center in a city of Taiwan. The evaluation was initiated by Chiayi City Government through inviting three professionals in the field of assistive technology as evaluators. For the purpose of evaluation, the Executive…

  18. The Advanced Technology Environmental Education Center Summer Fellows Institute.

    Science.gov (United States)

    Depken, Diane E.; Zeman, Catherine L.; Lensch, Ellen Kabat; Brown, Edward J.

    2002-01-01

    Describes the background, activities, and outcomes of the Advanced Technology Environmental Education Center (ATEEC) and its Summer Fellows Institutes as a model for disciplinary and cross-disciplinary infusion of environmental science and technology content, curriculum, and methods into the classroom. Presents experiences, themes, and activities…

  19. Dryden Flight Research Center Chemical Pharmacy Program

    Science.gov (United States)

    Davis, Bette

    1997-01-01

    The Dryden Flight Research Center (DFRC) Chemical Pharmacy "Crib" is a chemical sharing system which loans chemicals to users, rather than issuing them or having each individual organization or group purchasing the chemicals. This cooperative system of sharing chemicals eliminates multiple ownership of the same chemicals and also eliminates stockpiles. Chemical management duties are eliminated for each of the participating organizations. The chemical storage issues, hazards and responsibilities are eliminated. The system also ensures safe storage of chemicals and proper disposal practices. The purpose of this program is to reduce the total releases and transfers of toxic chemicals. The initial cost of the program to DFRC was $585,000. A savings of $69,000 per year has been estimated for the Center. This savings includes the reduced costs in purchasing, disposal and chemical inventory/storage responsibilities. DFRC has chemicals stored in 47 buildings and at 289 locations. When the program is fully implemented throughout the Center, there will be three chemical locations at this facility. The benefits of this program are the elimination of chemical management duties; elimination of the hazard associated with chemical storage; elimination of stockpiles; assurance of safe storage; assurance of proper disposal practices; assurance of a safer workplace; and more accurate emissions reports.

  20. SciDAC Visualization and Analytics Center for Enabling Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Joy, Kenneth I. [Univ. of California, Davis, CA (United States)

    2014-09-14

    This project focuses on leveraging scientific visualization and analytics software technology as an enabling technology for increasing scientific productivity and insight. Advances in computational technology have resulted in an "information big bang," which in turn has created a significant data understanding challenge. This challenge is widely acknowledged to be one of the primary bottlenecks in contemporary science. The vision for our Center is to respond directly to that challenge by adapting, extending, creating when necessary and deploying visualization and data understanding technologies for our science stakeholders. Using an organizational model as a Visualization and Analytics Center for Enabling Technologies (VACET), we are well positioned to be responsive to the needs of a diverse set of scientific stakeholders in a coordinated fashion using a range of visualization, mathematics, statistics, computer and computational science and data management technologies.

  1. Success Stories | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NIH’s world-class facilities, resources, and discoveries. Some of our partnerships have resulted in the commercialization of therapeutics, vaccines, diagnostics, medical devices and research tools that benefit patients worldwide. TTC is proud to share a few examples of our successful partnerships. | [google6f4cd5334ac394ab.html

  2. Savannah River Technology Center monthly report

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    This document contains information about the research programs being conducted at the Savannah River Plant. Topics of discussion include: Acorn Cleaning Study, tritium, separation processes, bioremediation programs, environmental remediation, environmental sampling, waste management, statistical design, phase I array experiments, and, Monte Carlo Neutron Photon input files.

  3. Center for Renewable Energy Science and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Billo, Richard; Rajeshwar, Krishnan

    2013-01-15

    The CREST research team conducted research that optimized catalysts used for the conversion of southwestern lignite into synthetic crude oil that can be shipped to nearby Texas refineries and power plants for development of transportation fuels and power generation. Research was also undertaken to convert any potential by-products of this process such as CO2 to useful chemicals and gases which could be recycled and used as feedstock to the synthetic fuel process. These CO2 conversion processes used light energy to drive the endogonic reduction reactions involved. The project was divided into two tasks: A CO2 Conversion Task, and a Catalyst Optimization Task. The CO2 Conversion task was aimed at developing molecular and solid state catalysts for the thermal, electro- and photocatalytic reduction of CO2 to reduced products such as simple feedstock compounds (e.g. CO, H2, CHOOH, CH2O, CH3OH and CH4). For example, the research team recycled CO that was developed from this Task and used it as a feedstock for the production of synthetic crude in the Catalyst Optimization Task. In the Catalyst Optimization Task, the research team conducted bench-scale experiments with the goal of reducing overall catalyst cost in support of several synthetic crude processes that had earlier been developed. This was accomplished by increasing the catalyst reactivity thus reducing required concentrations or by using less expensive metals. In this task the team performed parametric experiments in small scale batch reactors in an effort to improve catalyst reactivity and to lower cost. They also investigated catalyst robustness by testing lignite feedstocks that vary in moisture, h, and volatile content.

  4. Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

  5. Technology Transfer Center to Assume Patenting and Licensing Responsibilities | Poster

    Science.gov (United States)

    The NCI Technology Transfer Center (TTC) is undergoing a reorganization that will bring patenting and licensing responsibilities to the Shady Grove and Frederick offices by October 2015. The reorganization is a result of an effort begun in 2014 by NIH to improve the organizational structure of technology transfer at NIH to meet the rapid rate of change within science, technology, and industry, and to better align the science and laboratory goals with the licensing and patenting process.

  6. Research technology as a barrier to research

    Directory of Open Access Journals (Sweden)

    J. M. Scheepers

    1994-06-01

    Full Text Available There appears to be considerable concern regarding the progress which masters and doctoral students make in their studies and the underlying causes are thought to relate to the absence of a suitable research climate on campuses. The aim of this study was to identify factors which relate to the research output of tutors. With this in mind a questionnaire was developed and handed to 120 tutors in the human sciences for completion. The means and variances of the variables in the questionnaire were computed/ the variables were intercorrelated and subjected to a principal factor analysis. Four factors were extracted and identified as: knowledge of research technology research output/ knowledge of research methodology and ability to conduct research, and teaching experience in research methodology Two regression analyses were done. The first against a "soft" criterion (perceived ability to conduct empirical research and the second against a "hard" criterion (the real research output of tutors. Multiple correlation coefficients of 0,7257 and 0/5824 respectively, were obtained. Opsomming Die vordering van magister en doktorale studente skyn aansienlike kommer te wek, en die oorsake daarvan word in die afwesigheid van 'n gepaste navorsingsklimaat op kampusse, gesoek. Die doel van hierdie studie was om faktore te identifiseer wat verband hou met die navorsingsuitset van dosente. Met die oog hierop is 'n vraelys opgestel en aan 120 dosente in die geesteswetenskappe vir voltooiing oorhandig. Die gemiddeldes en variansies van die veranderlikes is bereken, die veranderlikes is gemterkorreleer en aan 'n hooffaktorontleding onderwerp. Vier faktore is onttrek en geidentifiseer as: kennis van navorsingstegnologie, navorsingsuitset, kennis van navor-singsmetodologie en die vermoe om navorsing te doen, en onderrigervaring m navorsingsmetodologie. Twee prcgressie-ontledings is gedoen. Die eerste teen 'n "sagte" kriterium (persepsie van dosente van hul vermoe om

  7. Nuclear Criticality Experimental Research Center (NCERC) Overview

    Energy Technology Data Exchange (ETDEWEB)

    Goda, Joetta Marie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Grove, Travis Justin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hayes, David Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Myers, William L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sanchez, Rene Gerardo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-03

    The mission of the National Criticality Experiments Research Center (NCERC) at the Device Assembly Facility (DAF) is to conduct experiments and training with critical assemblies and fissionable material at or near criticality in order to explore reactivity phenomena, and to operate the assemblies in the regions from subcritical through delayed critical. One critical assembly, Godiva-IV, is designed to operate above prompt critical. The Nuclear Criticality Experimental Research Center (NCERC) is our nation’s only general-purpose critical experiments facility and is only one of a few that remain operational throughout the world. This presentation discusses the history of NCERC, the general activities that makeup work at NCERC, and the various government programs and missions that NCERC supports. Recent activities at NCERC will be reviewed, with a focus on demonstrating how NCERC meets national security mission goals using engineering fundamentals. In particular, there will be a focus on engineering theory and design and applications of engineering fundamentals at NCERC. NCERC activities that relate to engineering education will also be examined.

  8. Graduate Automotive Technology Education (GATE) Program: Center of Automotive Technology Excellence in Advanced Hybrid Vehicle Technology at West Virginia University

    Energy Technology Data Exchange (ETDEWEB)

    Nigle N. Clark

    2006-12-31

    This report summarizes the technical and educational achievements of the Graduate Automotive Technology Education (GATE) Center at West Virginia University (WVU), which was created to emphasize Advanced Hybrid Vehicle Technology. The Center has supported the graduate studies of 17 students in the Department of Mechanical and Aerospace Engineering and the Lane Department of Computer Science and Electrical Engineering. These students have addressed topics such as hybrid modeling, construction of a hybrid sport utility vehicle (in conjunction with the FutureTruck program), a MEMS-based sensor, on-board data acquisition for hybrid design optimization, linear engine design and engine emissions. Courses have been developed in Hybrid Vehicle Design, Mobile Source Powerplants, Advanced Vehicle Propulsion, Power Electronics for Automotive Applications and Sensors for Automotive Applications, and have been responsible for 396 hours of graduate student coursework. The GATE program also enhanced the WVU participation in the U.S. Department of Energy Student Design Competitions, in particular FutureTruck and Challenge X. The GATE support for hybrid vehicle technology enhanced understanding of hybrid vehicle design and testing at WVU and encouraged the development of a research agenda in heavy-duty hybrid vehicles. As a result, WVU has now completed three programs in hybrid transit bus emissions characterization, and WVU faculty are leading the Transportation Research Board effort to define life cycle costs for hybrid transit buses. Research and enrollment records show that approximately 100 graduate students have benefited substantially from the hybrid vehicle GATE program at WVU.

  9. Genomics:GTL Bioenergy Research Centers White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Mansfield, Betty Kay [ORNL; Alton, Anita Jean [ORNL; Andrews, Shirley H [ORNL; Bownas, Jennifer Lynn [ORNL; Casey, Denise [ORNL; Martin, Sheryl A [ORNL; Mills, Marissa [ORNL; Nylander, Kim [ORNL; Wyrick, Judy M [ORNL; Drell, Dr. Daniel [Office of Science, Department of Energy; Weatherwax, Sharlene [U.S. Department of Energy; Carruthers, Julie [U.S. Department of Energy

    2006-08-01

    In his Advanced Energy Initiative announced in January 2006, President George W. Bush committed the nation to new efforts to develop alternative sources of energy to replace imported oil and fossil fuels. Developing cost-effective and energy-efficient methods of producing renewable alternative fuels such as cellulosic ethanol from biomass and solar-derived biofuels will require transformational breakthroughs in science and technology. Incremental improvements in current bioenergy production methods will not suffice. The Genomics:GTL Bioenergy Research Centers will be dedicated to fundamental research on microbe and plant systems with the goal of developing knowledge that will advance biotechnology-based strategies for biofuels production. The aim is to spur substantial progress toward cost-effective production of biologically based renewable energy sources. This document describes the rationale for the establishment of the centers and their objectives in light of the U.S. Department of Energy's mission and goals. Developing energy-efficient and cost-effective methods of producing alternative fuels such as cellulosic ethanol from biomass will require transformational breakthroughs in science and technology. Incremental improvements in current bioenergy-production methods will not suffice. The focus on microbes (for cellular mechanisms) and plants (for source biomass) fundamentally exploits capabilities well known to exist in the microbial world. Thus 'proof of concept' is not required, but considerable basic research into these capabilities remains an urgent priority. Several developments have converged in recent years to suggest that systems biology research into microbes and plants promises solutions that will overcome critical roadblocks on the path to cost-effective, large-scale production of cellulosic ethanol and other renewable energy from biomass. The ability to rapidly sequence the DNA of any organism is a critical part of these new

  10. Genomics:GTL Bioenergy Research Centers White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Mansfield, Betty Kay [ORNL; Alton, Anita Jean [ORNL; Andrews, Shirley H [ORNL; Bownas, Jennifer Lynn [ORNL; Casey, Denise [ORNL; Martin, Sheryl A [ORNL; Mills, Marissa [ORNL; Nylander, Kim [ORNL; Wyrick, Judy M [ORNL; Drell, Dr. Daniel [Office of Science, Department of Energy; Weatherwax, Sharlene [U.S. Department of Energy; Carruthers, Julie [U.S. Department of Energy

    2006-08-01

    In his Advanced Energy Initiative announced in January 2006, President George W. Bush committed the nation to new efforts to develop alternative sources of energy to replace imported oil and fossil fuels. Developing cost-effective and energy-efficient methods of producing renewable alternative fuels such as cellulosic ethanol from biomass and solar-derived biofuels will require transformational breakthroughs in science and technology. Incremental improvements in current bioenergy production methods will not suffice. The Genomics:GTL Bioenergy Research Centers will be dedicated to fundamental research on microbe and plant systems with the goal of developing knowledge that will advance biotechnology-based strategies for biofuels production. The aim is to spur substantial progress toward cost-effective production of biologically based renewable energy sources. This document describes the rationale for the establishment of the centers and their objectives in light of the U.S. Department of Energy's mission and goals. Developing energy-efficient and cost-effective methods of producing alternative fuels such as cellulosic ethanol from biomass will require transformational breakthroughs in science and technology. Incremental improvements in current bioenergy-production methods will not suffice. The focus on microbes (for cellular mechanisms) and plants (for source biomass) fundamentally exploits capabilities well known to exist in the microbial world. Thus 'proof of concept' is not required, but considerable basic research into these capabilities remains an urgent priority. Several developments have converged in recent years to suggest that systems biology research into microbes and plants promises solutions that will overcome critical roadblocks on the path to cost-effective, large-scale production of cellulosic ethanol and other renewable energy from biomass. The ability to rapidly sequence the DNA of any organism is a critical part of these new

  11. 77 FR 43131 - Designation of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry...

    Science.gov (United States)

    2012-07-23

    ... Designation of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries (PCI... of the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries (PCI... determined that the Center for Innovation and Technology Cooperation (CITC), Pentane Chemistry Industries...

  12. 77 FR 43368 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

    Science.gov (United States)

    2012-07-24

    ... Employment and Training Administration Navistar Truck Development and Technology Center, a Subsidiary of... October 20, 2011, applicable to workers of Navistar International Truck Development and Technology Center... Truck Development and Technology Center, a Subsidiary of Navistar International Corporation,...

  13. NASA University Research Centers Technical Advances in Education, Aeronautics, Space, Autonomy, Earth and Environment

    Science.gov (United States)

    Jamshidi, M. (Editor); Lumia, R. (Editor); Tunstel, E., Jr. (Editor); White, B. (Editor); Malone, J. (Editor); Sakimoto, P. (Editor)

    1997-01-01

    This first volume of the Autonomous Control Engineering (ACE) Center Press Series on NASA University Research Center's (URC's) Advanced Technologies on Space Exploration and National Service constitute a report on the research papers and presentations delivered by NASA Installations and industry and Report of the NASA's fourteen URC's held at the First National Conference in Albuquerque, New Mexico from February 16-19, 1997.

  14. 75 FR 80062 - National Center for Research Resources; Notice of Closed Meetings

    Science.gov (United States)

    2010-12-21

    ... Democracy Blvd., Room 1068, Bethesda, MD 20892, 301-435-0965. Name of Committee: National Center for... Health, National Center for Research Resources, Office of Review, Room 1074, 6701 Democracy Blvd., MSC... Technology; 93.389, Research Infrastructure, 93.306, 93.333; 93.702, ARRA Related Construction...

  15. Structure and Development of Centers for Nursing Research.

    Science.gov (United States)

    Grey, Margaret

    2002-01-01

    Nursing research centers help strengthen faculty research capability, improve research education, and facilitate collaborations and use of resources. The director plays a pivotal role in securing funding, nurturing new researchers, and overseeing ethical behavior in human subjects research. (SK)

  16. Research and Infrastructure Development Center for Nanomaterials Research

    Science.gov (United States)

    2009-05-01

    engineered in metallic magnetostrictive Fe(1-x)Gax/piezoelectric PMN-PT heterostructures; • Engineer an unusually large thermoelectric figure of merit “ZT...Department of Mechanical Engineering – Engineering Mechanics Introduction This research was focused both on the analytical and numerical study of...Single Electron Transistors Introduction The current hazardous sensors are too bulky, complex, and costly. Technological improvement in

  17. Technology complementing military behavioral health efforts at tripler army medical center.

    Science.gov (United States)

    Stetz, Melba C; Folen, Raymond A; Yamanuha, Bronson K

    2011-06-01

    The purpose of this article is to provide a short narrative on the ways that behavioral health professionals and their patients are currently benefitting from the use of technology. Examples stem from applications of technology to patients/research participants at the Tripler Army Medical Center. The paper also discusses how current use of this technology has made it possible to serve individuals in their own cultural environment, providing a cost-effective means of providing mental health services.

  18. Solar Energy Research Center Instrumentation Facility

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Thomas, J.; Papanikolas, John, P.

    2011-11-11

    SOLAR ENERGY RESEARCH CENTER INSTRUMENTATION FACILITY The mission of the Solar Energy Research Center (UNC SERC) at the University of North Carolina at Chapel Hill (UNC-CH) is to establish a world leading effort in solar fuels research and to develop the materials and methods needed to fabricate the next generation of solar energy devices. We are addressing the fundamental issues that will drive new strategies for solar energy conversion and the engineering challenges that must be met in order to convert discoveries made in the laboratory into commercially available devices. The development of a photoelectrosynthesis cell (PEC) for solar fuels production faces daunting requirements: (1) Absorb a large fraction of sunlight; (2) Carry out artificial photosynthesis which involves multiple complex reaction steps; (3) Avoid competitive and deleterious side and reverse reactions; (4) Perform 13 million catalytic cycles per year with minimal degradation; (5) Use non-toxic materials; (6) Cost-effectiveness. PEC efficiency is directly determined by the kinetics of each reaction step. The UNC SERC is addressing this challenge by taking a broad interdisciplinary approach in a highly collaborative setting, drawing on expertise across a broad range of disciplines in chemistry, physics and materials science. By taking a systematic approach toward a fundamental understanding of the mechanism of each step, we will be able to gain unique insight and optimize PEC design. Access to cutting-edge spectroscopic tools is critical to this research effort. We have built professionally-staffed facilities equipped with the state-of the-art instrumentation funded by this award. The combination of staff, facilities, and instrumentation specifically tailored for solar fuels research establishes the UNC Solar Energy Research Center Instrumentation Facility as a unique, world-class capability. This congressionally directed project funded the development of two user facilities: TASK 1: SOLAR

  19. Local and national impact of aerospace research and technology

    Science.gov (United States)

    Mccarthy, J. F., Jr.

    1981-01-01

    An overview of work at the NASA Lewis Research Center in the areas of aeronautics space, and energy is presented. Local and national impact of the work is discussed. Some aspects of the U.S. research and technology base, the aerospace industry, and foreign competition are discussed. In conclusion, U.S. research and technology programs are cited as vital to U.S. economic health.

  20. Cultivating Data Expertise and Roles at a National Research Center

    Science.gov (United States)

    Thompson, C. A.

    2015-12-01

    As research becomes more computation and data-intensive, it brings new demands for staff that can manage complex data, design user services, and facilitate open access. Responding to these new demands, universities and research institutions are developing data services to support their scientists and scholarly communities. As more organizations extend their operations to research data, a better understanding of the staff roles and expertise required to support data-intensive research services is needed. What is data expertise - knowledge, skills, and roles? This study addresses this question through a case study of an exemplar research center, the National Center for Atmospheric Research (NCAR) in Boulder, CO. The NCAR case study results were supplemented and validated with a set of interviews of managers at additional geoscience data centers. To date, 11 interviews with NCAR staff and 19 interviews with managers at supplementary data centers have been completed. Selected preliminary results from the qualitative analysis will be reported in the poster: Data professionals have cultivated expertise in areas such as managing scientific data and products, understanding use and users, harnessing technology for data solutions, and standardizing metadata and data sets. Staff roles and responsibilities have evolved over the years to create new roles for data scientists, data managers/curators, data engineers, and senior managers of data teams, embedding data expertise into each NCAR lab. Explicit career paths and ladders for data professionals are limited but starting to emerge. NCAR has supported organization-wide efforts for data management, leveraging knowledge and best practices across all the labs and their staff. Based on preliminary results, NCAR provides a model for how organizations can build expertise and roles into their data service models. Data collection for this study is ongoing. The author anticipates that the results will help answer questions on what are

  1. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  2. Mode 2 in action. Working across sectors to create a Center for Humanities and Technology

    NARCIS (Netherlands)

    Wyatt, S.M.E.

    2015-01-01

    This article examines recent developments in Amsterdam to establish a Center for Humanities and Technology (CHAT). The project is a collaboration between public research institutions and a private partner. To date, a White Paper has been produced that sets out a shared research agenda addressing bot

  3. Research in Antenna Technology, Radar Technology and Electromagnetic Scattering Phenomena

    Science.gov (United States)

    2015-04-06

    AFRL-OSR-VA-TR-2015-0081 Research in Antenna Technology John Schindler ARCON CORP Final Report 04/06/2015 DISTRIBUTION A: Distribution approved for...a group of six researchers in the fields of electromagnetics, radar and antenna technology. Research was conducted during this reporting period in...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 Research in Antenna technology, Radar Technology and Electromagnetic Scattering Phenomena

  4. The potential of RFID technology in Blood Center processes.

    Science.gov (United States)

    Kebo, V; Klement, P; Cermáková, Z; Gottfried, J; Sommerová, M; Palecek, A

    2010-01-01

    Current RFID technology deployment is limited by safety, procedural and physical limitations in healthcare field. It is important to define and ensure safe operation of technologies without actual deployment in real operation. Potential problems could arise due to the consequences of technical and physical characteristics of RFID technology and its improper location. This article deals with manipulation of blood products and the definition of suitable places for radio identification. Each suitable place must undergo laboratory experiments and tests. The results can provide a convenient base for defining efficient and safe deployment of RFID technology in Blood Centers with substantial financial savings for Czech healthcare.

  5. Molecular Science Research Center, 1991 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Knotek, M.L.

    1992-03-01

    During 1991, the Molecular Science Research Center (MSRC) experienced solid growth and accomplishment and the Environmental, and Molecular Sciences Laboratory (EMSL) construction project moved forward. We began with strong programs in chemical structure and dynamics and theory, modeling, and simulation, and both these programs continued to thrive. We also made significant advances in the development of programs in materials and interfaces and macromolecular structure and dynamics, largely as a result of the key staff recruited to lead these efforts. If there was one pervasive activity for the past year, however, it was to strengthen the role of the EMSL in the overall environmental restoration and waste management (ER/WM) mission at Hanford. These extended activities involved not only MSRC and EMSL staff but all PNL scientific and technical staff engaged in ER/WM programs.

  6. Superconducting Microwave Electronics at Lewis Research Center

    Science.gov (United States)

    Warner, Joseph D.; Bhasin, Kul B.; Leonard, Regis F.

    1991-01-01

    Over the last three years, NASA Lewis Research Center has investigated the application of newly discovered high temperature superconductors to microwave electronics. Using thin films of YBa2Cu3O7-delta and Tl2Ca2Ba2Cu3Ox deposited on a variety of substrates, including strontium titanate, lanthanum gallate, lanthanum aluminate and magnesium oxide, a number of microwave circuits have been fabricated and evaluated. These include a cavity resonator at 60 GHz, microstrip resonators at 35 GHz, a superconducting antenna array at 35 GHz, a dielectric resonator at 9 GHz, and a microstrip filter at 5 GHz. Performance of some of these circuits as well as suggestions for other applications are reported.

  7. Hydrogen Technology Research at SRNL

    Energy Technology Data Exchange (ETDEWEB)

    Danko, E.

    2011-02-13

    The Savannah River National Laboratory (SRNL) is a U.S. Department of Energy research and development laboratory located at the Savannah River Site (SRS) near Aiken, South Carolina. SRNL has over 50 years of experience in developing and applying hydrogen technology, both through its national defense activities as well as through its recent activities with the DOE Hydrogen Programs. The hydrogen technical staff at SRNL comprises over 90 scientists, engineers and technologists. SRNL has ongoing R&D initiatives in a variety of hydrogen storage areas, including metal hydrides, complex hydrides, chemical hydrides and carbon nanotubes. SRNL has over 25 years of experience in metal hydrides and solid-state hydrogen storage research, development and demonstration. As part of its defense mission at SRS, SRNL developed, designed, demonstrated and provides ongoing technical support for the largest hydrogen processing facility in the world based on the integrated use of metal hydrides for hydrogen storage, separation, and compression. The SRNL has been active in teaming with academic and industrial partners to advance hydrogen technology. A primary focus of SRNL's R&D has been hydrogen storage using metal and complex hydrides. SRNL and its Hydrogen Technology Research Laboratory have been very successful in leveraging their defense infrastructure, capabilities and investments to help solve this country's energy problems. SRNL has participated in projects to convert public transit and utility vehicles for operation using hydrogen fuel. Two major projects include the H2Fuel Bus and an Industrial Fuel Cell Vehicle (IFCV) also known as the GATOR{trademark}. Both of these projects were funded by DOE and cost shared by industry. These are discussed further in Section 3.0, Demonstration Projects. In addition to metal hydrides technology, the SRNL Hydrogen group has done extensive R&D in other hydrogen technologies, including membrane filters for H2 separation, doped carbon

  8. Severe accident research in the core degradation area: An example of effective international cooperation between the European Union (EU) and the Commonwealth of Independent States (CIS) by the International Science and Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Bottomley, D., E-mail: paul.bottomley@ec.europa.eu [ITU Institut fuer Transurane, PO box 2340, 76125 Karlsruhe (Germany); Stuckert, J.; Hofmann, P. [KIT Campus Nord, Hermann-von-Helmholtz Pl. 1, 76344 Eggenstein-Leopoldshafen (Germany); Tocheny, L. [ISTC Krasnoproletarskaya 32-34, PO Box 20, 127473 Moscow (Russian Federation); Hugon, M. [European Commission DG - Research and Tech. Development, Sq. de Meeus, B-1049 Brussels (Belgium); Journeau, C. [CEA, DEN, Cadarache, F13108 St Paul lez Durance (France); Clement, B. [IRSN PSN-RES/SAG Cadarache, BP3 F13115, St Paul lez Durance (France); Weber, S. [GRS Muenchen, Thermal Hydraulics Div., Garching 85748,Germany (Germany); Guentay, S. [PSI NES/LTH OHSA C11, 5232 Villigen (Switzerland); Hozer, Z. [AEKI Fuel Department, P.O. Box 49, Budapest H-1525 (Hungary); Herranz, L. [CIEMAT, Energy -Nuclear Fission Division, Complutense 40, 28040 Madrid (Spain); Schumm, A. [EDF - R and D, SINETICS, Avenue du General de Gaulle 1, Clamart 92140 (France); Oriolo, F. [Pisa University, Ing. Mecc. Nucl. Prod., Largo Lazarino 2, Pisa 56126 (Italy); Altstadt, E. [HZDR Structural Matls, Rossendorf, Postfach 51 01 19, 01314 Dresden (Germany); Krause, M. [AECL - Reactor Safety, Chalk River, Ontario, Canada K0J 1J0 (Canada); Fischer, M. [AREVA NP GMBH, Dept. PEPA-G, 91058 Erlangen (Germany); Khabensky, V.B. [Alexandrov Institute of Technologies (NITI), Sosnovy Bor (Russian Federation); Bechta, S.V. [Kungliga Tekniska Hoegskolan (KTH), AlbaNova University Centre, Roslagstullsbacken 21, SE-106 91 Stockholm (Sweden); Veshchunov, M.S. [Nuclear Safety Institute (IBRAE), Russian Academy of Sciences, 52 B. Tulskaya, Moscow 115191 (Russian Federation); Palagin, A.V. [KIT Campus Nord, Hermann-von-Helmholtz Pl. 1, 76344 Eggenstein-Leopoldshafen (Germany); and others

    2012-11-15

    Highlights: Black-Right-Pointing-Pointer ISTC supported successful nuclear safety projects between EU and Russian institutes. Black-Right-Pointing-Pointer Two-tier project monitoring has proved to be very successful and flexible. Black-Right-Pointing-Pointer Examples are reactor degradation, corium steel corrosion, and corium thermodynamics. - Abstract: The International Science and Technology Center (ISTC) was set up in Moscow to support non-proliferation of sensitive knowledge and technologies in biological, chemical and nuclear domains by engaging scientists in peaceful research programmes with a broad international cooperation. The paper has two following objectives: Bullet to describe the organization of complex, international, experimental and analytical research of material processes under extreme conditions similar to those of severe accidents in nuclear reactors and, Bullet to inform briefly about some results of these studies. The main forms of ISTC activity are Research Projects and Supporting Programs. In the Research Projects informal contact expert groups (CEGs) were set up by ISTC to improve coordination between adjacent projects and to encourage international collaboration. The European Commission was the first to use this. The CEG members - experts from the national institutes and industry - evaluated and managed the projects' scientific results from initial stage of proposal formulation until the final reporting. They were often involved directly in the project's details by joining the Steering Committees of the project. The Contact Expert Group for Severe Accidents and Management (CEG-SAM) is one of these groups, five project groups from this area from the total of 30 funded projects during 10 years of activity are detailed to demonstrate this: (1) QUENCH-VVER from RIAR, Dimitrovgrad and IBRAE, Moscow, and PARAMETER projects (SF1-SF4) from LUCH, Podolsk and IBRAE, Moscow; these concerned a detailed study of bundle quenching from high

  9. 美国科学技术中心协同创新模式研究与启示%The Research on the Collaborative Innovation Model of American Science and Technology Center and Its Enlightment on China

    Institute of Scientific and Technical Information of China (English)

    胡德鑫; 郭哲

    2016-01-01

    In 1987 ,the NSF funded the establishment of the science and technology center ,aimed at promoting the fore‐front of all scientific research ,training a large number of innovative talents and the realization of multi - knowledge trans‐fer ,in order to consolidate its leading position in the international scientific research .The study found that the STC has centralized and decentralized organization management model ,integration of research and education ,knowledge transfer , dynamic monitoring and assessment ,etc .In the construction of cooperative innovation center in our country ,w e should take full advantage of its advantages ,so as to continuously improve the collaborative innovation capability and quality level of our country ,and create favorable conditions for our country to change from human resources to human capital .%1987年,美国国家科学基金会(NSF)资助建立科学技术中心(STC),旨在促进科研领域前沿基础科学研究、培养大批创新性人才以及实现多方知识转移,以更好地巩固其在国际上的科学技术研究领导地位。研究发现,美国科学技术中心在运作模式上具有组织管理“集中—分散”、研究与教育紧密结合、知识转移有效、动态监测评估等多重优点。我国在建设协同创新中心时,应充分借鉴其优点,不断提高我国高校协同创新能力与质量,为早日从人力资源大国向人力资本强国转变创造有利条件。

  10. Propulsion Controls and Health Management Research at NASA Glenn Research Center

    Science.gov (United States)

    Garg, Sanjay

    2002-01-01

    With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Technology Branch at NASA Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with the U.S. aerospace industry and academia to develop advanced controls and health management technologies that will help meet these challenges. These technologies are being developed with a view towards making the concept of "Intelligent Engines" a reality. The major research activities of the Controls and Dynamics Technology Branch are described in the following.

  11. Recent Cycle Time Reduction at Langley Research Center

    Science.gov (United States)

    Kegelman, Jerome T.

    2000-01-01

    The NASA Langley Research Center (LaRC) has been engaged in an effort to reduce wind tunnel test cycle time in support of Agency goals and to satisfy the wind tunnel testing needs of the commercial and military aerospace communities. LaRC has established the Wind Tunnel Enterprise (WTE), with goals of reducing wind tunnel test cycle time by an order of magnitude by 2002, and by two orders of magnitude by 2010. The WTE also plans to meet customer expectations for schedule integrity, as well as data accuracy and quality assurance. The WTE has made progress towards these goals over the last year with a focused effort on technological developments balanced by attention to process improvements. This paper presents a summary of several of the WTE activities over the last year that are related to test cycle time reductions at the Center. Reducing wind tunnel test cycle time, defined here as the time between the freezing of loft lines and delivery of test data, requires that the relationship between high productivity and data quality assurance be considered. The efforts have focused on all of the drivers for test cycle time reduction, including process centered improvements, facility upgrades, technological improvements to enhance facility readiness and productivity, as well as advanced measurement techniques. The application of internet tools and computer modeling of facilities to allow a virtual presence of the customer team is also presented.

  12. Composite Structures and Materials Research at NASA Langley Research Center

    Science.gov (United States)

    Starnes, James H., Jr.; Dexter, H. Benson; Johnston, Norman J.; Ambur, Damodar R.; Cano, roberto J.

    2003-01-01

    A summary of recent composite structures and materials research at NASA Langley Research Center is presented. Fabrication research to develop low-cost automated robotic fabrication procedures for thermosetting and thermoplastic composite materials, and low-cost liquid molding processes for preformed textile materials is described. Robotic fabrication procedures discussed include ply-by-ply, cure-on-the-fly heated placement head and out-of-autoclave electron-beam cure methods for tow and tape thermosetting and thermoplastic materials. Liquid molding fabrication processes described include Resin Film Infusion (RFI), Resin Transfer Molding (RTM) and Vacuum-Assisted Resin Transfer Molding (VARTM). Results for a full-scale composite wing box are summarized to identify the performance of materials and structures fabricated with these low-cost fabrication methods.

  13. Research Agenda in Cloud Technologies

    CERN Document Server

    Sriram, Ilango

    2010-01-01

    Cloud computing is the latest effort in delivering computing resources as a service. It represents a shift away from computing as a product that is purchased, to computing as a service that is delivered to consumers over the internet from large-scale data centres - or "clouds". Whilst cloud computing is gaining growing popularity in the IT industry, academia appeared to be lagging behind the rapid developments in this field. This paper is the first systematic review of peer-reviewed academic research published in this field, and aims to provide an overview of the swiftly developing advances in the technical foundations of cloud computing and their research efforts. Structured along the technical aspects on the cloud agenda, we discuss lessons from related technologies; advances in the introduction of protocols, interfaces, and standards; techniques for modelling and building clouds; and new use-cases arising through cloud computing.

  14. SAVANNAH RIVER TECHNOLOGY CENTER MONTHLY REPORT AUGUST 1992

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, J.M.

    1999-06-21

    'This monthly report summarizes Programs and Accomplishments of the Savannah River Technology Center in support of activities at the Savannah River Site. The following categories are addressed: Reactor, Tritium, Separations, Environmental, Waste Management, General, and Items of Interest.'

  15. Centers for manufacturing technology: Industrial Advisory Committee Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

  16. Sino-Swiss center for cassava technology launched in Shanghai

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Under the joint sponsorship of the Shanghai Institutes for Biological Sciences (SIBS) and Swiss Federal Institute of Technology (ETH Zurich), the Shanghai Center for Cassava Biotechnology (SCCB) has been established at the Shanghai Institute of Plant Physiology and Ecology(SIPE), SIBS.

  17. Wing Classification in the Virtual Research Center

    Science.gov (United States)

    Campbell, William H.

    1999-01-01

    The Virtual Research Center (VRC) is a Web site that hosts a database of documents organized to allow teams of scientists and engineers to store and maintain documents. A number of other workgroup-related capabilities are provided. My tasks as a NASA/ASEE Summer Faculty Fellow included developing a scheme for classifying the workgroups using the VRC using the various Divisions within NASA Enterprises. To this end I developed a plan to use several CGI Perl scripts to gather classification information from the leaders of the workgroups, and to display all the workgroups within a specified classification. I designed, implemented, and partially tested scripts which can be used to do the classification. I was also asked to consider directions for future development of the VRC. I think that the VRC can use XML to advantage. XML is a markup language with designer tags that can be used to build meaning into documents. An investigation as to how CORBA, an object-oriented object request broker included with JDK 1.2, might be used also seems justified.

  18. Solar photovoltaics: Stand alone applications. [NASA Lewis Research Center research and development

    Science.gov (United States)

    Deyo, J. N.

    1980-01-01

    The Lewis Research Center involvement in space photovoltaic research and development and in using photovoltaics for terrestrial applications is described with emphasis on applications in which the normal source of power may be a diesel generator, batteries, or other types of power not connected to a utility grid. Once an application is processed, technology is developed and demonstrated with a user who participates in the cost and furnishes the site. Projects completed related to instruments, communication, refrigeration, and highways, are described as well as warning systems, weather stations, fire lookouts, and village power systems. A commercially available photovoltaic powered electric fence charger is the result of Lewis research and development.

  19. User-centered design and interactive health technologies for patients.

    Science.gov (United States)

    De Vito Dabbs, Annette; Myers, Brad A; Mc Curry, Kenneth R; Dunbar-Jacob, Jacqueline; Hawkins, Robert P; Begey, Alex; Dew, Mary Amanda

    2009-01-01

    Despite recommendations that patients be involved in the design and testing of health technologies, few reports describe how to involve patients in systematic and meaningful ways to ensure that applications are customized to meet their needs. User-centered design is an approach that involves end users throughout the development process so that technologies support tasks, are easy to operate, and are of value to users. In this article, we provide an overview of user-centered design and use the development of Pocket Personal Assistant for Tracking Health (Pocket PATH) to illustrate how these principles and techniques were applied to involve patients in the development of this interactive health technology. Involving patient-users in the design and testing ensured functionality and usability, therefore increasing the likelihood of promoting the intended health outcomes.

  20. Center for Semiconductor Materials and Device Modeling: expanding collaborative research opportunities between government, academia, and industry

    Science.gov (United States)

    Perconti, Philip; Bedair, Sarah S.; Bajaj, Jagmohan; Schuster, Jonathan; Reed, Meredith

    2016-09-01

    To increase Soldier readiness and enhance situational understanding in ever-changing and complex environments, there is a need for rapid development and deployment of Army technologies utilizing sensors, photonics, and electronics. Fundamental aspects of these technologies include the research and development of semiconductor materials and devices which are ubiquitous in numerous applications. Since many Army technologies are considered niche, there is a lack of significant industry investment in the fundamental research and understanding of semiconductor technologies relevant to the Army. To address this issue, the US Army Research Laboratory is establishing a Center for Semiconductor Materials and Device Modeling and seeks to leverage expertise and resources across academia, government and industry. Several key research areas—highlighted and addressed in this paper—have been identified by ARL and external partners and will be pursued in a collaborative fashion by this Center. This paper will also address the mechanisms by which the Center is being established and will operate.

  1. FSE - Center for research, training and development. The Siemens Building Technologies office building at Frankfurt, Main; Forschungs-, Schulungs- und Entwicklungszentrum (FSE). Firmengebaeude der Siemens Building Technologies in Frankfurt/Main

    Energy Technology Data Exchange (ETDEWEB)

    Schmid, W.

    2003-07-01

    The new office building of Siemens Building Technologies (SBT) is described. Apart from an impressive architecture, the system also has a state-of-the-art facility management system based on open protocols like Ethernet TCP/IP, BACnet and LONTalk. [German] Als sachlich-technisches Gebaeude mit einem Hang zum Understatement wurde der neue Firmensitz von Siemens Building Technologies (SBT) Deutschland errichtet. Aehnlich wie das Produkt-, System- und Dienstleistungsangebot entspricht das Forschungs-, Schulungs- und Entwicklungszentrum ''FSE'' ganz den Prinzipien Offenheit, Flexibilitaet und Standardisierung. Das in Systembauweise aus Stahlbetonfertigteilen erstellte Gebaeude vermittelt trotz wirtschaftlich orientierter Bescheidenheit ein hohes Mass an Identitaet und sachlicher Repraesentanz. In dem klar strukturierten Baukoerper mit eher klassischer Heizungs- und Lueftungstechnik ist die derzeit wohl modernste gewerkeuebergreifende Gebaeudeautomation installiert, die ganz auf offenen Protokollen wie Ethernet TCP/IP, BACnet und LONTalk aufbaut. (orig.)

  2. Center Independent Research & Developments: JPL IRAD Program

    Data.gov (United States)

    National Aeronautics and Space Administration — Innovative projects are sought in the areas of basic research, fundamental research, applied research, development and systems and other concept formulation studies....

  3. Research in space commercialization, technology transfer, and communications

    Science.gov (United States)

    1982-01-01

    Research and internship programs in technology transfer, space commercialization, and information and communications policy are described. The intern's activities are reviewed. On-campus research involved work on the costs of conventional telephone technology in rural areas, an investigation of the lag between the start of a research and development project and the development of new technology, using NASA patent and patent waiver data, studies of the financial impact and economic prospects of a space operation center, a study of the accuracy of expert forecasts of uncertain quantities and a report on frequency coordination in the fixed and fixed satellite services at 4 and 6 GHz.

  4. Final priorities; National Institute on Disability and Rehabilitation Research--Disability and Rehabilitation Research Projects and Centers Program--Rehabilitation Engineering Research Centers. Final priorities.

    Science.gov (United States)

    2013-06-11

    The Assistant Secretary for Special Education and Rehabilitative Services announces priorities under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). Specifically, we announce priorities for a Rehabilitation Engineering Research Center (RERC) on Rehabilitation Strategies, Techniques, and Interventions (Priority 1), Information and Communication Technologies Access (Priority 2), Individual Mobility and Manipulation (Priority 3), and Physical Access and Transportation (Priority 4). The Assistant Secretary may use one or more of these priorities for competitions in fiscal year (FY) 2013 and later years. We take this action to focus research attention on areas of national need. We intend these priorities to improve community living and participation, health and function, and employment outcomes of individuals with disabilities.

  5. Final priority; National Institute on Disability and Rehabilitation Research--Disability and Rehabilitation Projects and Centers Program--Rehabilitation Engineering Research Centers. Final priority.

    Science.gov (United States)

    2013-06-19

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority for a Rehabilitation Engineering Research Center (RERC) on Technologies to Support Successful Aging with Disability under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). The Assistant Secretary may use this priority for a competition in fiscal year (FY) 2013 and later years. We take this action to focus research attention on areas of national need. We intend to use this priority to improve outcomes for individuals with disabilities.

  6. Renal Cancer Biomarkers | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute's Laboratory of Proteomics and Analytical Technologies is seeking statements of capability or interest from parties interested in collaborative research to further develop, evaluate, or commercialize diagnostic, therapeutic and prognostic cancer biomarkers from clinical specimens.

  7. 76 FR 62814 - National Center For Research Resources; Notice of Closed Meeting

    Science.gov (United States)

    2011-10-11

    ..., Office of Review, National Center for Research Resources, National Institutes of Health, 6701 Democracy Blvd., 1 Democracy Plaza, Rm. 1070, Bethesda, MD 20892, 301-435-0813, matocham@mail.nih.gov... Research; 93.371, Biomedical Technology; 93.389, Research Infrastructure, 93.306, 93.333; 93.702,...

  8. 75 FR 26760 - National Center for Research Resources; Notice of Closed Meeting

    Science.gov (United States)

    2010-05-12

    ... Officer, National Center for Research Resources, or National Institutes of Health, 6701 Democracy Blvd., 1 Democracy Plaza, Room 1074, MSC 4874, Bethesda, MD 20892-4874, 301-435-0824, dunnbo@mail.nih.gov... Research; 93.371, Biomedical Technology; 93.389, Research Infrastructure, 93.306, 93.333; 93.702,...

  9. Center for Neutron Research Project. Status report

    Energy Technology Data Exchange (ETDEWEB)

    West, C.D.; Primm, R.T. III; Copeland, G.L.; Difilippo, F.C.; Griess, J.C.; Gambill, W.R.; Moon, R.M.; Siman-Tov, I.I.

    1986-09-01

    The Center for Neutron Research (CNR) will provide the world's best facilities for the study of neutron scattering. The CNR will contain a very high flux reactor that will achieve an extremely high power density (between 4 and 8 MW/L). The reactor is to be fueled with uranium silicide and cooled, moderated, and reflected by D/sub 2/O. Initial reactor physics calculations indicate that a power level of 270 MW with a reactor core volume of 35 L will achieve a peak thermal flux in the reflector of 10/sup 20/ neutrons x m/sup -2/ x s/sup -1/. The reactor fuel will be contained in thin (1.3-mm) plates, similar to those employed in the very successful High-Flux Isotope Reactor, and will be graded in the axial and radial directions. Coolant velocity is to be 27 m/s, and core inlet pressure is to be 5.6 MPa. Maximum fuel centerline temperature will be approx.350/sup 0/C. Initial thermal-hydraulic studies indicate that some method of preventing the formation of aluminum oxide on the fuel clad is required if the highest performance is to be achieved. Tests to confirm these calculations are planned. One of the experimental facilities is to be a cold (10-MeV) neutron source. Calculations to determine the size of the source have been initiated, but additional cross-section data are needed. An abbreviated version of a tentative program plan for fiscal year 1987 and beyond is described. Total program expenditures are expected to be $40 million over 5 years.

  10. Safety, Reliability, and Quality Assurance Provisions for the Office of Aeronautics, Exploration and Technology Centers

    Science.gov (United States)

    1991-01-01

    This Handbook establishes general safety, reliability, and quality assurance (SR&QA) guidelines for use on flight and ground-based projects conducted at the Ames, Langley, and Lewis Research Centers, hereafter identified as the Office of Aeronautics, Exploration and Technology (OAET) Centers. This document is applicable to all projects and operations conducted at these Centers except for those projects covered by more restrictive provisions such as the Space Shuttle, Space Station, and unmanned spacecraft programs. This Handbook is divided into two parts. The first (Chapters 1 and 2) establishes the SR&QA guidelines applicable to the OAET Centers, and the second (Appendices A, B, C, and D) provides examples and definitions for the total SR&QA program. Each center should implement SR&QA programs using these guidelines with tailoring appropriate to the special projects conducted by each Center. This Handbook is issued in loose-leaf form and will be revised by page changes.

  11. 76 FR 11498 - Submission for OMB Review; Comment Request; Generic Submission of Technology Transfer Center (TTC...

    Science.gov (United States)

    2011-03-02

    ... Submission of Technology Transfer Center (TTC) External Customer Satisfaction Surveys (NCI) SUMMARY: Under... control number. Proposed Collection: Title: Generic Submission of Technology Transfer Center (TTC... collaborations and alliances with the NIH. The needs of external technology transfer customers and stakeholders...

  12. Development and Testing of the Glenn Research Center Visitor's Center Grid-Tied Photovoltaic Power System

    Science.gov (United States)

    Eichenberg, Dennis J.

    2009-01-01

    The NASA Glenn Research Center (GRC) has developed, installed, and tested a 12 kW DC grid-tied photovoltaic (PV) power system at the GRC Visitor s Center. This system utilizes a unique ballast type roof mount for installing the photovoltaic panels on the roof of the Visitor s Center with no alterations or penetrations to the roof. The PV system has generated in excess of 15000 kWh since operation commenced in August 2008. The PV system is providing power to the GRC grid for use by all. Operation of the GRC Visitor s Center PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provides valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the GRC Visitor s Center PV system, additional PV power system expansion at GRC is under consideration. The GRC Visitor s Center grid-tied PV power system was successfully designed and developed which served to validate the basic principles

  13. Center for Biologics Evaluation and Research (CBER)

    Data.gov (United States)

    Federal Laboratory Consortium — CBER is the Center within FDA that regulates biological products for human use under applicable federal laws, including the Public Health Service Act and the Federal...

  14. Virginia Tech creates Caribbean center for education and research

    OpenAIRE

    Felker, Susan B.

    2006-01-01

    Virginia Tech has established a research, education, and outreach center in the Caribbean that will serve as part of a broad strategy to create international centers of scholarship around the world. The Caribbean Center for Education and Research (CCER) in Punta Cana, on the eastern tip of the Dominican Republic, will allow Virginia Tech faculty to conduct research as well as instruct students on biodiversity, environmental and social sustainability, global issues in natural resources, and ho...

  15. DoD Information Operations Center for Research

    OpenAIRE

    2012-01-01

    This memorandum cancels Deputy Secretary of Defense Memorandum, "Information Operations Center of Excellence," dated Septembet 3, 2004, and redesignates the Naval Postgraduate's School (NPS), Information Operations (IO) Center of Excellence, as the DoD Information Operations Cetner for Research. As the DoD Information Operations Center for Research, the NPS shall provide graduate-level IO education and facilitate the exploration of new IO concepts, research, analysis, and field experimentation.

  16. Bastyr/UW Oncomycology Translational Research Center

    Data.gov (United States)

    Federal Laboratory Consortium — Research Area: FungiProgram: Partnerships for CAM Clinical Translational ResearchDescription:Trametes versicolor is an immunologically active medicinal mushroom that...

  17. Bastyr/UW Oncomycology Translational Research Center

    Data.gov (United States)

    Federal Laboratory Consortium — Research Area: Fungi Program: Partnerships for CAM Clinical Translational Research Description: Trametes versicolor is an immunologically active medicinal mushroom...

  18. PSP Testing at NASA Ames Research Center

    Science.gov (United States)

    Bell, J. H.; Hand, L. A.; Schairer, E. T.; Mehta, R. D.; George, Michael W. (Technical Monitor)

    1997-01-01

    Pressure sensitive paints (PSPs) are now used routinely for measuring surface pressures on wind tunnel models at transonic and supersonic Mach numbers. The method utilizes a surface coating containing fluorescent or phosphorescent materials, the brightness of which varies with the local air pressure on the surface. The present paper will summarize PSP activities (in progress and planned) at the NASA Ames Research Center. One of the main accomplishments at NASA Ames has been the development of a PSP measurement system that is production testing capable. This system has been integrated successfully into the large-scale wind tunnel facilities at Ames. There are several problems related to PSP testing which are unique to large-scale wind tunnel testing. The hardware is often difficult to set-up and must operate under harsh conditions (e.g. high pressures and low temperatures). The data acquisition and reduction times need to be kept to a minimum so that the overall wind tunnel productivity is not compromised. The pressure sensitive paints needs to be very robust; the paints must readily adhere to different surfaces with varying geometries and remain functional for long running times. The paint must have well understood, and preferably minimal, temperature sensitivity since fine control of the tunnel temperature is not easily achievable in the larger wind tunnels. In an effort to improve the overall accuracy of the PSP technique, we are currently evaluating some referenced pressure sensitive paints which contain a pressure- independent luminophor in addition to the one which is affected by the surface pressure. The two luminophors are chosen so that their emission wavelengths are somewhat different. Then by taking two 'wind-on' images with either two cameras (with different filters) or one camera with a rotating filter system, the need for 'wind-off' images can be eliminated. The ratio of the two wind-on images accounts for nonuniform lighting and model motion problems

  19. University of Washington Center for Child Environmental Health Risks Research

    Data.gov (United States)

    Federal Laboratory Consortium — The theme of the University of Washington based Center for Child Environmental Health Risks Research (CHC) is understanding the biochemical, molecular and exposure...

  20. INFORMATION TECHNOLOGY, GLOBALIZATION THROUGH RESEARCH AND SOCIAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Sidhu Lovedeep singh

    2015-10-01

    Full Text Available Globalization of science and technology is an integral aspect of globalization per se. The main engine of globalization is assumed to be the global economy propelled by global trade and technology transfers, the latter as aspects of globalization of science and technology. International trade and technology transfers are the engines that drive global economy. Much has been written on these drivers but relatively little on what drives globalization of science and technology which constitutes the backbone of international technology transfers. I attempt to fill this knowledge gap by suggesting that the drivers behind globalization of science and technology are the emerging global centers of collaborative research and development (R&D. “Science” throughout this article means both science and technology as the two closely related aspects of the same knowledge system.

  1. Establishment of the Center for Biomedical Technology Innovation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-12-15

    The report discussed the following topics: (1) Orthopedic Devices; (2) Hybrid Vector and Method Resulting in Protein Overproduction by Eukaryotic Cells; (3) Surgical Simulator; (4) CBTI (Center for Biomedical Technology Innovation) as an Incubator for Start-up Companies; (5) Voice-activated, computer-assisted surgical robotics; (6) Through transmission ultrasonic 3-D holography for diagnostic imaging; (7) CBTI's Scibermed{trademark} Virtual Institute (SVI); and (8) Laser Oxygenation Tomography.

  2. Career and Technology Center Honors Julie Hartman | Poster

    Science.gov (United States)

    By Carolynne Keenan, Contributing Writer On May 7, Julie Hartman was honored by the Frederick County Career and Technology Center (CTC) for her support of the CTC’s Biomedical Sciences Program. As an education program specialist for Outreach and Special Programs at NCI at Frederick, Hartman is responsible for NCI at Frederick’s participation in the program, which is designed to offer Frederick County high school students hands-on, practical laboratory experience beyond the typical classroom setting. 

  3. ESTABLISHMENT OF THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-07-01

    Technical Progress Report describes progress made on the eight sub-projects awarded in the first year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of activity only.

  4. Establishment of the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Final Technical Report covers the eight sub-projects awarded in the first year and the five projects awarded in the second year of Cooperative Agreement DE-FC26-01NT41091: Establishment of the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  5. Six Decades of Flight Research: Dryden Flight Research Center, 1946 - 2006 [DVD

    Science.gov (United States)

    Fisher, David F.; Parcel, Steve

    2007-01-01

    This DVD contains an introduction by Center Director Kevin Peterson, two videos on the history of NASA Dryden Flight Research Center and a bibliography of NASA Dryden Flight Research Center publications from 1946 through 2006. The NASA Dryden 60th Anniversary Summary Documentary video is narrated by Michael Dorn and give a brief history of Dryden. The Six Decades of Flight Research at NASA Dryden lasts approximately 75 minutes and is broken up in six decades: 1. The Early X-Plane Era; 2. The X-15 Era; 3. The Lifting Body Era; 4. The Space Shuttle Era; 5. The High Alpha and Thrust Vectoring Era; and 6. The technology Demonstration Era. The bibliography provides citations for NASA Technical Reports and Conference Papers, Tech Briefs, Contractor Reports, UCLA Flight Systems Research Center publications and Dryden videos. Finally, a link is provided to the NASA Dryden Gallery that features video clips and photos of the many unique aircraft flown at NASA Dryden and its predecessor organizations.

  6. A Student-Centered Astronomical Research Community of Practice

    Science.gov (United States)

    Genet, Russell; Johnson, Jolyon; Boyce, Pat; Boyce, Grady; Buchheim, obert; Harshaw, Richard; Kenney, John; Collins, Dwight; Rowe, David; Brewer, Mark; Estrada, Reed; Estrada, Chris; Gillette, Sean; Ridgely, John; McNab, Christine; Freed, Rachel; Wallen, Vera

    2016-05-01

    For over a decade, students from Cuesta College and number of high schools have engaged in astronomical research during one-term seminars. A community of practice - consisting of students, educators, and astronomers - has formed that is centered on supporting the students' astronomical research. The seminar has recently adopted distance education technology and automated telescopes in a hybrid form of on-line and inperson collaborations between students, educators, and astronomers. This hybridization is not only resulting in new areas of growth and opportunity, but has created a number of challenges. For example, as more schools joined this seminar, standardized teaching materials such as a textbook and self-paced, online learning units had to be developed. Automated telescopes devoted to expanding student research opportunities within this community of practice are being brought on line by Concordia University and the Boyce Research Initiatives and Educational Foundation. The Institute for Student Astronomical Research supports this growing community in many ways including maintaining a website and editing books of student papers published through the Collins Foundation Press.

  7. PMARC - PANEL METHOD AMES RESEARCH CENTER

    Science.gov (United States)

    Ashby, D. L.

    1994-01-01

    Panel methods are moderate cost tools for solving a wide range of engineering problems. PMARC (Panel Method Ames Research Center) is a potential flow panel code that numerically predicts flow fields around complex three-dimensional geometries. PMARC's predecessor was a panel code named VSAERO which was developed for NASA by Analytical Methods, Inc. PMARC is a new program with many additional subroutines and a well-documented code suitable for powered-lift aerodynamic predictions. The program's open architecture facilitates modifications or additions of new features. Another improvement is the adjustable size code which allows for an optimum match between the computer hardware available to the user and the size of the problem being solved. PMARC can be resized (the maximum number of panels can be changed) in a matter of minutes. Several other state-of-the-art PMARC features include internal flow modeling for ducts and wind tunnel test sections, simple jet plume modeling essential for the analysis and design of powered-lift aircraft, and a time-stepping wake model which allows the study of both steady and unsteady motions. PMARC is a low-order panel method, which means the singularities are distributed with constant strength over each panel. In many cases low-order methods can provide nearly the same accuracy as higher order methods (where the singularities are allowed to vary linearly or quadratically over each panel). Low-order methods have the advantage of a shorter computation time and do not require exact matching between panels. The flow problem is solved by assuming that the body is at rest in a moving flow field. The body is modeled as a closed surface which divides space into two regions -- one region contains the flow field of interest and the other contains a fictitious flow. External flow problems, such as a wing in a uniform stream, have the external region as the flow field of interest and the internal flow as the fictitious flow. This arrangement is

  8. FY2012 Engineering Research & Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Lane, Monya

    2014-07-22

    This report documents engineering research, development, and technology advancements performed by LLNL during fiscal year 2012 in the following areas: computational engineering, engineering information systems, micro/nano-devices and structures, and measurement technologies.

  9. The concept of externality: Implications for TVA Environmental Research Center

    Energy Technology Data Exchange (ETDEWEB)

    Foster, T.H.

    1994-06-01

    Pollution of the environment is a result of the economic activities of production and consumption. And although the market system is touted as the superior method of organizing and operating an economic system, society frequently is dissatisfied with some of the side effects. In these cases of market failure, a cry for intervention often is raised to obtain more socially-desirable solutions. Environmental pollution is one symptom of market failure. If the TVA Environmental Research Center is to focus on defining solutions to environmental problems and designing policy options for implementing such solutions, its efforts should benefit from an understanding of why the market fails and how it may be adjusted to produce more socially-desirable results. The purposes of this report are to: (1) promote an appreciation for and understanding of the concept of externality; (2) demonstrate the utility of the concept in the design and packaging of policy and technology for improved environmental performance; (3) provide a brief summary of the externality valuation issue currently being debated by the electric power industry; and (4) identify environmental research and development agenda opportunities or strategic considerations suggested for the Center by this review.

  10. Earth Radiation Budget Research at the NASA Langley Research Center

    Science.gov (United States)

    Smith, G. Louis; Harrison, Edwin F.; Gibson, Gary G.

    2014-01-01

    In the 1970s research studies concentrating on satellite measurements of Earth's radiation budget started at the NASA Langley Research Center. Since that beginning, considerable effort has been devoted to developing measurement techniques, data analysis methods, and time-space sampling strategies to meet the radiation budget science requirements for climate studies. Implementation and success of the Earth Radiation Budget Experiment (ERBE) and the Clouds and the Earth's Radiant Energy System (CERES) was due to the remarkable teamwork of many engineers, scientists, and data analysts. Data from ERBE have provided a new understanding of the effects of clouds, aerosols, and El Nino/La Nina oscillation on the Earth's radiation. CERES spacecraft instruments have extended the time coverage with high quality climate data records for over a decade. Using ERBE and CERES measurements these teams have created information about radiation at the top of the atmosphere, at the surface, and throughout the atmosphere for a better understanding of our climate. They have also generated surface radiation products for designers of solar power plants and buildings and numerous other applications

  11. Air Traffic Management Research at NASA Ames Research Center

    Science.gov (United States)

    Lee, Katharine

    2005-01-01

    Since the late 1980's, NASA Ames researchers have been investigating ways to improve the air transportation system through the development of decision support automation. These software advances, such as the Center-TRACON Automation System (eTAS) have been developed with teams of engineers, software developers, human factors experts, and air traffic controllers; some ASA Ames decision support tools are currently operational in Federal Aviation Administration (FAA) facilities and some are in use by the airlines. These tools have provided air traffic controllers and traffic managers the capabilities to help reduce overall delays and holding, and provide significant cost savings to the airlines as well as more manageable workload levels for air traffic service providers. NASA is continuing to collaborate with the FAA, as well as other government agencies, to plan and develop the next generation of decision support tools that will support anticipated changes in the air transportation system, including a projected increase to three times today's air-traffic levels by 2025. The presentation will review some of NASA Ames' recent achievements in air traffic management research, and discuss future tool developments and concepts currently under consideration.

  12. Critical technologies research: Opportunities for DOE

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Recent studies have identified a number of critical technologies that are essential to the nation's defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy's Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE's capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

  13. Critical technologies research: Opportunities for DOE

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Recent studies have identified a number of critical technologies that are essential to the nation`s defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy`s Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE`s capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

  14. Federally Sponsored Multidisciplinary Research Centers: Learning, Evaluation, and Vicious Circles

    Science.gov (United States)

    Youtie, Jan; Corley, Elizabeth A.

    2011-01-01

    Despite the increasing investment in multi-year federally funded science and technology centers in universities, there are few studies of how these centers engage in learning and change based on information submitted from various agents in the oversight and evaluation process. One challenge is how to manage and respond to this evaluative…

  15. Analysis of Alternatives (AoA) of Open Colllaboration and Research Capabilities Collaboratipon in Research and Engineering in Advanced Technology and Education and High-Performance Computing Innovation Center (HPCIC) on the LVOC.

    Energy Technology Data Exchange (ETDEWEB)

    Vrieling, P. Douglas [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2016-01-01

    The Livermore Valley Open Campus (LVOC), a joint initiative of the National Nuclear Security Administration (NNSA), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL), enhances the national security missions of NNSA by promoting greater collaboration between world-class scientists at the national security laboratories, and their partners in industry and academia. Strengthening the science, technology, and engineering (ST&E) base of our nation is one of the NNSA’s top goals. By conducting coordinated and collaborative programs, LVOC enhances both the NNSA and the broader national science and technology base, and helps to ensure the health of core capabilities at LLNL and SNL. These capabilities must remain strong to enable the laboratories to execute their primary mission for NNSA.

  16. The Strategic Electrochemical Research Center in Denmark

    DEFF Research Database (Denmark)

    Mogensen, Mogens Bjerg; Hansen, Karin Vels

    2011-01-01

    are taking part in the center. Now after 4 years both new equipment and methods have been developed and new scientific and technical results have been generated in relation to four technical applications, namely fuel cells, electrolysers, gas cleaners and oxygen sensors. Selected techniques and results...

  17. The Role of Technology in SLA Research

    Science.gov (United States)

    Chun, Dorothy M.

    2016-01-01

    In this review article for the 20th Anniversary Issue, I look back at research from the last two decades on the role of computer technology in understanding and facilitating second language acquisition (SLA) and forward to what future research might investigate. To be discussed are both how technology has been used to conduct research on SLA…

  18. The Role of Technology in SLA Research

    Science.gov (United States)

    Chun, Dorothy M.

    2016-01-01

    In this review article for the 20th Anniversary Issue, I look back at research from the last two decades on the role of computer technology in understanding and facilitating second language acquisition (SLA) and forward to what future research might investigate. To be discussed are both how technology has been used to conduct research on SLA…

  19. 2003 research briefs : Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2003-08-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems and Materials Modeling and Computational Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  20. 2004 research briefs :Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2004-01-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  1. 2005 Research Briefs : Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2005-05-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  2. Technology, relationships, and problems: a research synthesis.

    Science.gov (United States)

    Hertlein, Katherine M; Webster, Megan

    2008-10-01

    The advances in technology alter the ways we interact with each other. For some, the use of technology can facilitate a relationship; for others, technology can complicate aspects of a relationship. The purpose of this research synthesis is to summarize current research exploring the ways in which technology impacts relationships negatively. Eight studies were reviewed across the following areas: preoperational definitions, sample, methodology, control of extraneous variables, causal influence, generalizability, validity of statistical findings, and conclusions. Implications for authors, researchers, and therapists working with couples and families struggling with technology issues are discussed.

  3. Robotic Technology Efforts at the NASA/Johnson Space Center

    Science.gov (United States)

    Diftler, Ron

    2017-01-01

    The NASA/Johnson Space Center has been developing robotic systems in support of space exploration for more than two decades. The goal of the Center's Robotic Systems Technology Branch is to design and build hardware and software to assist astronauts in performing their mission. These systems include: rovers, humanoid robots, inspection devices and wearable robotics. Inspection systems provide external views of space vehicles to search for surface damage and also maneuver inside restricted areas to verify proper connections. New concepts in human and robotic rovers offer solutions for navigating difficult terrain expected in future planetary missions. An important objective for humanoid robots is to relieve the crew of "dull, dirty or dangerous" tasks allowing them more time to perform their important science and exploration missions. Wearable robotics one of the Center's newest development areas can provide crew with low mass exercise capability and also augment an astronaut's strength while wearing a space suit. This presentation will describe the robotic technology and prototypes developed at the Johnson Space Center that are the basis for future flight systems. An overview of inspection robots will show their operation on the ground and in-orbit. Rovers with independent wheel modules, crab steering, and active suspension are able to climb over large obstacles, and nimbly maneuver around others. Humanoid robots, including the First Humanoid Robot in Space: Robonaut 2, demonstrate capabilities that will lead to robotic caretakers for human habitats in space, and on Mars. The Center's Wearable Robotics Lab supports work in assistive and sensing devices, including exoskeletons, force measuring shoes, and grasp assist gloves.

  4. The Social Work Research Center at Colorado State University

    Science.gov (United States)

    Winokur, Marc A.; Valentine, Deborah P.; Drendel, James M.

    2009-01-01

    The Social Work Research Center is an innovative university-community partnership within the School of Social Work in the College of Applied Human Sciences at Colorado State University. The center is focused on working with county and state child welfare agencies to generate applied research that translates into evidence-based practice for serving…

  5. Quantum technology: from research to application

    Science.gov (United States)

    Schleich, Wolfgang P.; Ranade, Kedar S.; Anton, Christian; Arndt, Markus; Aspelmeyer, Markus; Bayer, Manfred; Berg, Gunnar; Calarco, Tommaso; Fuchs, Harald; Giacobino, Elisabeth; Grassl, Markus; Hänggi, Peter; Heckl, Wolfgang M.; Hertel, Ingolf-Volker; Huelga, Susana; Jelezko, Fedor; Keimer, Bernhard; Kotthaus, Jörg P.; Leuchs, Gerd; Lütkenhaus, Norbert; Maurer, Ueli; Pfau, Tilman; Plenio, Martin B.; Rasel, Ernst Maria; Renn, Ortwin; Silberhorn, Christine; Schiedmayer, Jörg; Schmitt-Landsiedel, Doris; Schönhammer, Kurt; Ustinov, Alexey; Walther, Philip; Weinfurter, Harald; Welzl, Emo; Wiesendanger, Roland; Wolf, Stefan; Zeilinger, Anton; Zoller, Peter

    2016-05-01

    The term quantum physics refers to the phenomena and characteristics of atomic and subatomic systems which cannot be explained by classical physics. Quantum physics has had a long tradition in Germany, going back nearly 100 years. Quantum physics is the foundation of many modern technologies. The first generation of quantum technology provides the basis for key areas such as semiconductor and laser technology. The "new" quantum technology, based on influencing individual quantum systems, has been the subject of research for about the last 20 years. Quantum technology has great economic potential due to its extensive research programs conducted in specialized quantum technology centres throughout the world. To be a viable and active participant in the economic potential of this field, the research infrastructure in Germany should be improved to facilitate more investigations in quantum technology research.

  6. FY04 Engineering Technology Reports Laboratory Directed Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Sharpe, R M

    2005-01-27

    This report summarizes the science and technology research and development efforts in Lawrence Livermore National Laboratory's Engineering Directorate for FY2004, and exemplifies Engineering's more than 50-year history of developing the technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence and has prepared for this role with a skilled workforce and the technical resources developed through venues like the Laboratory Directed Research and Development Program (LDRD). This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. Engineering's investment in technologies is carried out through two programs, the ''Tech Base'' program and the LDRD program. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply technologies to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Therefore, the LDRD report covered here has a strong research emphasis. Areas that are presented all fall into those needed to accomplish our mission. For FY2004, Engineering's LDRD projects were focused on mesoscale target fabrication and characterization, development of engineering computational capability, material studies and modeling, remote sensing and communications, and microtechnology and nanotechnology for national security applications. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, are responsible for guiding the long-term science and technology investments for the Directorate. The Centers represent technologies that have been identified as

  7. 34 CFR 350.32 - What activities must a Rehabilitation Engineering Research Center conduct?

    Science.gov (United States)

    2010-07-01

    ... DISABILITY AND REHABILITATION RESEARCH PROJECTS AND CENTERS PROGRAM What Rehabilitation Engineering Research... methods of applying advanced technology, scientific achievement, and psychological and social knowledge to...) Demonstrating and disseminating— (i) Innovative models for the delivery to rural and urban areas of cost...

  8. 75 FR 70934 - National Center For Research Resources; Notice of Closed Meeting

    Science.gov (United States)

    2010-11-19

    ... of Health, NCRR/OR, Democracy I, 6701 Democracy Blvd., 1066, Bethesda, MD 20892. (Telephone... Center for Research Resources, National Institutes of Health, 6705 Democracy Blvd., Dem. 1, Room 1074... Technology; 93.389, Research Infrastructure, 93.306, 93.333; 93.702, ARRA Related Construction...

  9. U.S. Dairy Forage Research Center

    Data.gov (United States)

    Federal Laboratory Consortium — Vision: Leading the world in integrated dairy forage systems research. Mission: Providing dairy industry solutions for food security, environmental sustainability,...

  10. U.S. DAIRY FORAGE RESEARCH CENTER

    Data.gov (United States)

    Federal Laboratory Consortium — Vision: Leading the world in integrated dairy forage systems research. Mission: Providing dairy industry solutions for food security, environmental sustainability,...

  11. Transportation Research Analysis Computing Center (TRACC)

    Data.gov (United States)

    Federal Laboratory Consortium — Argonne National Laboratory initiated a multi-year program with the US Department of Transportation (USDOT) in October 2006, to establish the Transportation Research...

  12. Development of a National Center for Hydrogen Technology. A Summary Report of Activities Completed at the National Center for Hydrogen Technology - Year 6

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Michael [Univ. of North Dakota, Grand Forks, ND (United States)

    2012-08-01

    The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology (NCHT) since 2005 under a Cooperative Agreement with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research on hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding for hydrogen-related projects ($24 million for projects in the NCHT, which includes federal and corporate partner development funds) involving more than 85 partners (27 with the NCHT). The NCHT Program's nine activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan that refers to realistic testing of technologies at adequate scale, process intensification, and contaminant control. A number of projects have been completed that range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in Year 6 of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

  13. Jupiter Oxygen Corporation/Albany Research Center Crada Progress Report, September

    Energy Technology Data Exchange (ETDEWEB)

    Turner, Paul C.; Schoenfield, Mark (Jupiter Oxygen Corp.)

    2004-09-13

    The Albany Research Center (ARC) has developed a new Integrated Pollutant Removal (IPR) process for fossil-fueled boilers. Pursuant to a cooperative research and development agreement (CRADA) with Jupiter Oxygen Corporation, ARC currently is studying the IPR process as applied to the oxygen fuel technology developed by Jupiter. As discussed further below, these two new technologies are complementary. This interim report summarizes the study results to date and outlines the potential activities under the next phase of the CRADA with Jupiter.

  14. People-Centered Language Recommendations for Sleep Research Communication.

    Science.gov (United States)

    Fuoco, Rebecca

    2017-03-06

    The growing embrace of patient-centered outcomes research (PCOR) in sleep medicine is a significant step forward for the field. In engaging and incorporating the unique perspectives of people with sleep disorders, PCOR enhances the relevance of findings and facilitates the uptake of research into practice. While centering research design around what matters most to people with sleep disorders is critical, research communication must be similarly people-centered. One approach is using "people-centered language" in both professional and public communications. People-centered language is rooted in sociolinguistic research demonstrating that language both reflects and shapes attitudes. People-centered language puts people first, is precise and neutral, and respects autonomy. By adhering to the language guidelines described in this article, sleep researchers will better serve the field's most important stakeholders.The sleep medicine community is increasingly recognizing the importance of patient-centered outcomes and partnerships in research. In step with these initiatives, sleep researchers should use thoughtful and purposeful language in both professional and public communication. Such language should be people-centered, respecting the humanity and dignity of people who participate in research and people with sleep disorders generally.Beyond a matter of political correctness, people-centered language is grounded in sociolinguistic principles positing that language significantly shapes ideological preconceptions. In other words, language not only reflects attitudes, it also affects them. Language choices in medical research communication can thus unintentionally perpetuate stereotypes and negative attitudes about people with the studied conditions. Since many people with sleep disorders face stigma, language is indeed a consequential consideration for sleep researchers. Language also shapes perceptions of research and can either discourage or empower people to

  15. Application Research on Energy-saving Emission Reduction Technology at Data Center%节能减排技术在数据中心的应用研究

    Institute of Scientific and Technical Information of China (English)

    杜致远; 张仁庆; 陈昌鑫

    2011-01-01

    The energy-efficient data center prohlem has been paid attention more and more , this article proposes some technologies to realize energy-saving, based on the current development situation of dala center energy-saving. Using these ways, it not only can save great of electric power changes and extent equipments life, but also can decrease the environment influence cased by dato center consuming. It helps enterprises to establish image.%数据中心节能问题越来越被重视,本文根据教据中心节能方面目前的发展情况,提出一些技术使企业数据中心实现节能使用这些技术,不仅可节约大量电费支出和延长设备寿命,同时减少数据中心对环境的影响,为企业树立环保的形象.

  16. Research needs of the new accelerator technologies

    Energy Technology Data Exchange (ETDEWEB)

    Sessler, A.M.

    1982-08-01

    A review is given of some of the new accelerator technologies with a special eye to the requirements which they generate for research and development. Some remarks are made concerning the organizational needs of accelerator research.

  17. Alternative treatment technology information center computer database system

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, D. [Environmental Protection Agency, Edison, NJ (United States)

    1995-10-01

    The Alternative Treatment Technology Information Center (ATTIC) computer database system was developed pursuant to the 1986 Superfund law amendments. It provides up-to-date information on innovative treatment technologies to clean up hazardous waste sites. ATTIC v2.0 provides access to several independent databases as well as a mechanism for retrieving full-text documents of key literature. It can be accessed with a personal computer and modem 24 hours a day, and there are no user fees. ATTIC provides {open_quotes}one-stop shopping{close_quotes} for information on alternative treatment options by accessing several databases: (1) treatment technology database; this contains abstracts from the literature on all types of treatment technologies, including biological, chemical, physical, and thermal methods. The best literature as viewed by experts is highlighted. (2) treatability study database; this provides performance information on technologies to remove contaminants from wastewaters and soils. It is derived from treatability studies. This database is available through ATTIC or separately as a disk that can be mailed to you. (3) underground storage tank database; this presents information on underground storage tank corrective actions, surface spills, emergency response, and remedial actions. (4) oil/chemical spill database; this provides abstracts on treatment and disposal of spilled oil and chemicals. In addition to these separate databases, ATTIC allows immediate access to other disk-based systems such as the Vendor Information System for Innovative Treatment Technologies (VISITT) and the Bioremediation in the Field Search System (BFSS). The user may download these programs to their own PC via a high-speed modem. Also via modem, users are able to download entire documents through the ATTIC system. Currently, about fifty publications are available, including Superfund Innovative Technology Evaluation (SITE) program documents.

  18. Joint Langley Research Center/Jet Propulsion Laboratory CSI experiment

    Science.gov (United States)

    Neat, Gregory W.; O'Brien, John F.; Lurie, Boris J.; Garnica, Angel; Belvin, W. K.; Sulla, Jeff; Won, John

    1992-01-01

    This paper describes a joint Control Structure Interaction (CSI) experiment in which Jet Propulsion Laboratory (JPL) damping devices were incorporated into the Langley Research Center (LaRC) Phase 0 Testbed. The goals of the effort were twofold: (1) test the effectiveness of the JPL structural damping methods in a new structure and (2) assess the feasibility of combining JPL local control methods with the LaRC multiple input multiple output global control methods. Six dampers (2 piezoelectric active members, 4 viscous dampers), placed in three different regions of the structure, produced up to 26 dB attenuation in target modes. The combined control strategy in which the JPL damping methods contributed local control action and the LaRC control scheme provided global control action, produced and overall control scheme with increased stability margins and improved performance. This paper presents an overview of the technologies contributed from the two centers, the strategies used to combine them, and results demonstrating the success of the damping and cooperative control efforts.

  19. The Employee Invention Report (EIR) | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    After making a unique, non-obvious, and useful discovery, NIH researchers must immediately contact their Laboratory or Branch Chief and inform him or her of a possible invention, and then consult with your NCI TTC Technology Transfer Manager about submitting an Employee Invention Report (EIR) Form. | [google6f4cd5334ac394ab.html

  20. Mouse Xenograft Model for Mesothelioma | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The National Cancer Institute is seeking parties interested in collaborative research to co-develop, evaluate, or commercialize a new mouse model for monoclonal antibodies and immunoconjugates that target malignant mesotheliomas. Applications of the technology include models for screening compounds as potential therapeutics for mesothelioma and for studying the pathology of mesothelioma.

  1. Virology Interest Group | Center for Cancer Research

    Science.gov (United States)

    The Virology Interest Group comprises researchers at NIH and in the local area who are interested in virology. The group organizes activities designed to promote interactions and exchange of information.

  2. Fisher Center for Alzheimer's Research Foundation

    Science.gov (United States)

    ... a Cure Read More Together we can make Alzheimer's nothing but a memory Scroll to see how ... cure We are making a major impact on Alzheimer’s research. Our scientific discoveries are featured in top ...

  3. The National Center for Atmospheric Research (NCAR) Research Data Archive: a Data Education Center

    Science.gov (United States)

    Peng, G. S.; Schuster, D.

    2015-12-01

    The National Center for Atmospheric Research (NCAR) Research Data Archive (RDA), rda.ucar.edu, is not just another data center or data archive. It is a data education center. We not only serve data, we TEACH data. Weather and climate data is the original "Big Data" dataset and lessons learned while playing with weather data are applicable to a wide range of data investigations. Erroneous data assumptions are the Achilles heel of Big Data. It doesn't matter how much data you crunch if the data is not what you think it is. Each dataset archived at the RDA is assigned to a data specialist (DS) who curates the data. If a user has a question not answered in the dataset information web pages, they can call or email a skilled DS for further clarification. The RDA's diverse staff—with academic training in meteorology, oceanography, engineering (electrical, civil, ocean and database), mathematics, physics, chemistry and information science—means we likely have someone who "speaks your language." Data discovery is another difficult Big Data problem; one can only solve problems with data if one can find the right data. Metadata, both machine and human-generated, underpin the RDA data search tools. Users can quickly find datasets by name or dataset ID number. They can also perform a faceted search that successively narrows the options by user requirements or simply kick off an indexed search with a few words. Weather data formats can be difficult to read for non-expert users; it's usually packed in binary formats requiring specialized software and parameter names use specialized vocabularies. DSs create detailed information pages for each dataset and maintain lists of helpful software, documentation and links of information around the web. We further grow the level of sophistication of the users with tips, tutorials and data stories on the RDA Blog, http://ncarrda.blogspot.com/. How-to video tutorials are also posted on the NCAR Computational and Information Systems

  4. Key success factors of health research centers: A mixed method study

    Science.gov (United States)

    Tofighi, Shahram; Teymourzadeh, Ehsan; Heydari, Majid

    2017-01-01

    Background In order to achieve success in future goals and activities, health research centers are required to identify their key success factors. Objective This study aimed to extract and rank the factors affecting the success of research centers at one of the medical universities in Iran. Methods This study is a mixed method (qualitative-quantitative) study, which was conducted between May to October in 2016. The study setting was 22 health research centers. In qualitative phase, we extracted the factors affecting the success in research centers through purposeful interviews with 10 experts of centers, and classified them into themes and sub-themes. In the quantitative phase, we prepared a questionnaire and scored and ranked the factors recognized by 54 of the study samples by Friedman test. Results Nine themes and 42 sub-themes were identified. Themes included: strategic orientation, management, human capital, support, projects, infrastructure, communications and collaboration, paradigm and innovation and they were rated respectively as components of success in research centers. Among the 42 identified factors, 10 factors were ranked respectively as the key factors of success, and included: science and technology road map, strategic plan, evaluation indexes, committed human resources, scientific evaluation of members and centers, innovation in research and implementation, financial support, capable researchers, equipment infrastructure and teamwork. Conclusion According to the results, the strategic orientation was the most important component in the success of research centers. Therefore, managers and authorities of research centers should pay more attention to strategic areas in future planning, including the science and technology road map and strategic plan.

  5. Earthquake Engineering Research Center: 25th anniversry edition

    Science.gov (United States)

    1993-10-01

    The Earthquake Engineering Research Center exists to conduct research and develop technical information in all areas pertaining to earthquake engineering, including strong ground motion and ground failure, response of natural and manmade structures to earthquakes, design of structures to resist earthquakes, development of new systems for earthquake protection, and development of architectural and public policy aspects of earthquake engineering. The annual report for 1992-93 presents information on: Current Research Programs; Contracts and Grants; Public Service Program; National Information Service for Earthquake Engineering; Core Administration; Committees of the Earthquake Engineering Research Center; Research Participants - Faculty; and Research Participants - Students.

  6. Oil heat technology research and development

    Energy Technology Data Exchange (ETDEWEB)

    Kweller, E.R. [Department of Energy, Washington, DC (United States); McDonald, R.J. [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    The purpose of this United States Department of Energy (DOE)/Brookhaven National Laboratory (BNL) program is to develop a technology base for advancing the state-of-the-art related to oilfired combustion equipment. The major thrust is through technology based research that will seek new knowledge leading to improved designs and equipment optimization. The Combustion Equipment space Conditioning Technology program currently deals exclusively with residential and small commercial building oil heat technology.

  7. Extended Operation of Stirling Convertors at NASA Glenn Research Center

    Science.gov (United States)

    Oriti, Salvatore, M.

    2012-01-01

    NASA Glenn Research Center (GRC) has been supporting development of free-piston Stirling conversion technology for spaceflight electrical power generation since 1999. GRC has also been supporting the development of the Advanced Stirling Radioisotope Generator (ASRG) since 2006. A key element of the ASRG project is providing life, reliability, and performance data for the Advanced Stirling Convertor (ASC). The Thermal Energy Conversion branch at GRC is conducting extended operation of several free-piston Stirling convertors. The goal of this effort is to generate long-term performance data (tens of thousands of hours) on multiple units to build a life and reliability database. Currently, GRC is operating 18 convertors. This hardware set includes Technology Demonstration Convertors (TDCs) from Infinia Corporation, of which one pair (TDCs #13 and #14) has accumulated over 60,000 hr (6.8 years) of operation. Also under test are various Sunpower, Inc. convertors that were fabricated during the ASC development activity, including ASC-0, ASC-E (including those in the ASRG engineering unit), and ASC-E2. The ASC-E2s also completed, or are in progress of completing workmanship vibration testing, performance mapping, and extended operation. Two ASC-E2 units will also be used for durability testing, during which components will be stressed to levels above nominal mission usage. Extended operation data analyses from these tests are covered in this paper.

  8. The Savannah River Technology Center environmental monitoring field test platform

    Energy Technology Data Exchange (ETDEWEB)

    Rossabi, J.

    1993-03-05

    Nearly all industrial facilities have been responsible for introducing synthetic chemicals into the environment. The Savannah River Site is no exception. Several areas at the site have been contaminated by chlorinated volatile organic chemicals. Because of the persistence and refractory nature of these contaminants, a complete clean up of the site will take many years. A major focus of the mission of the Environmental Sciences Section of the Savannah River Technology Center is to develop better, faster, and less expensive methods for characterizing, monitoring, and remediating the subsurface. These new methods can then be applied directly at the Savannah River Site and at other contaminated areas in the United States and throughout the world. The Environmental Sciences Section has hosted field testing of many different monitoring technologies over the past two years primarily as a result of the Integrated Demonstration Program sponsored by the Department of Energy`s Office of Technology Development. This paper provides an overview of some of the technologies that have been demonstrated at the site and briefly discusses the applicability of these techniques.

  9. Using Videotape Technology: Innovations in Behavioral Research.

    Science.gov (United States)

    Niebuhr, Robert E.; And Others

    1981-01-01

    Reviews present and potential uses of videotape technology in behavioral research. Emphasis is placed on research methodology and the value of incorporating videotape in current research practices, including behavior observation studies, in modeling research, and in perceptual attribution investigations. Concludes with an analysis of advantages…

  10. Korea-China Optical Technology Research Centre

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Jung; Cha, H. K.; Rhee, Y. J. (and others)

    2007-04-15

    The main objectives of this project are to develop cooperative channel by personnel exchanges between industrial, educational and research partners of Korea and China on the fields of optical technologies which are the basis of optical industry and being spot-lighted as new industry of 21th century, and to raise the class of Korean optical technology up to world class by utilization of Chinese large facilities through the cooperative research between the optical technology institutions of both sides. To attain the goals mentioned above, we carried out the cooperative researches between the Korean and Chinese optical technology institutions in the following 7 fields; ? research cooperation between KAERI-SITP for the quantum structured far-IR sensor technology - research cooperation for the generation of femtosecond nuclear fusion induced neutrons - research cooperation between KAERI-AIOFM for laser environment analysis and remote sensing technology - research cooperation between KAERI-SIOM for advanced diode-pumped laser technology - cooperative research related on linear and nonlinear magneto-optical properties of advanced magnetic quantum structures - design of pico-second PW high power laser system and its simulation and - cooperative research related on the femto-second laser-plasma interaction physics.

  11. Development of a national center for hydrogen technology. A summary report of activities completed at the national center hydrogen technology from 2005 to 2010

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, Michael J. [Univ. of North Dakota, Grand Forks, ND (United States)

    2011-06-01

    The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology® (NCHT®) since 2005 under a Cooperative Agreement with the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research of hydrogen generation and utilization topics. Since the NCHT's inception, the EERC has received more than $65 million in funding of hydrogen-related projects ($20 million for the NCHT project which includes federal and corporate development partner funds) involving more than 85 partners (27 with the NCHT). The NCHT project's 19 activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan. A number of projects have been completed which range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified to transportation-grade quality in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in the first 5 years of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

  12. Research on carbon dioxide miscible flooding by Technology Research Center of Japan National Oil Corporation. Current status of CO/sub 2/ flooding field application, Work honored with the 31st JAPT award

    Energy Technology Data Exchange (ETDEWEB)

    Tanakadate, Tadao

    1988-03-01

    The application examples in world on carbon dioxide miscible flooding which is an enhanced oil recovery method and the outline of field pilot test in Japan which will start from fiscal 1989 were reported. In the USA, there are fifty three examples on carbon dioxide miscible flooding and thirty one examples on carbon dioxide immiscible flooding. The enhanced rates of oil recovery by carbon dioxide miscible flooding are 7 to 13 %. In Hungary, the oil reservior pressures were increased rapidly due to the carbon dioxide injection and the push by water, and the recovery rates of 24 % and more were achieved. In Turkey, carbon dioxide immiscible flooding is in a trial stage. In these countries, carbon dioxide can be provided comparatively easily owing to the existences of the carbon dioxide fields, and the advantageous conditions are utilized. In Japan, the pilot tests are carried out with main research subjects on the phase behavior of carbon dioxide-oil system, prospect for performance of carbon dioxide miscible flooding by oil reservior simulation. (10 figs, 2 tabs, 5 refs)

  13. A Community - Centered Astronomy Research Program

    Science.gov (United States)

    Boyce, Pat; Boyce, Grady

    2017-06-01

    The Boyce Research Initiatives and Education Foundation (BRIEF) is providing semester-long, hands-on, astronomy research experiences for students of all ages that results in their publishing peer-reviewed papers. The course in astronomy and double star research has evolved from a face-to-face learning experience with two instructors to an online - hybrid course that simultaneously supports classroom instruction at a variety of schools in the San Diego area. Currently, there are over 65 students enrolled in three community colleges, seven high schools, and one university as well as individual adult learners. Instructional experience, courseware, and supporting systems were developed and refined through experience gained in classroom settings from 2014 through 2016. Topics of instruction include Kepler's Laws, basic astrometry, properties of light, CCD imaging, use of filters for varying stellar spectral types, and how to perform research, scientific writing, and proposal preparation. Volunteer instructors were trained by taking the course and producing their own research papers. An expanded program was launched in the fall semester of 2016. Twelve papers from seven schools were produced; eight have been accepted for publication by the Journal of Double Observations (JDSO) and the remainder are in peer review. Three additional papers have been accepted by the JDSO and two more are in process papers. Three college professors and five advanced amateur astronomers are now qualified volunteer instructors. Supporting tools are provided by a BRIEF server and other online services. The server-based tools range from Microsoft Office and planetarium software to top-notch imaging programs and computational software for data reduction for each student team. Observations are performed by robotic telescopes worldwide supported by BRIEF. With this success, student demand has increased significantly. Many of the graduates of the first semester course wanted to expand their

  14. Desert Research and Technology Studies 2005 Report

    Science.gov (United States)

    Ross, Amy J.; Kosmo, Joseph J.; Janoiko, Barbara A.; Bernard, Craig; Splawn, Keith; Eppler, Dean B.

    2006-01-01

    During the first two weeks of September 2005, the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) Advanced Extravehicular Activity (AEVA) team led the field test portion of the 2005 Research and Technology Studies (RATS). The Desert RATS field test activity is the culmination of the various individual science and advanced engineering discipline areas year-long technology and operations development efforts into a coordinated field test demonstration under representative (analog) planetary surface terrain conditions. The purpose of the RATS is to drive out preliminary exploration concept of operations EVA system requirements by providing hands-on experience with simulated planetary surface exploration extravehicular activity (EVA) hardware and procedures. The RATS activities also are of significant importance in helping to develop the necessary levels of technical skills and experience for the next generation of engineers, scientists, technicians, and astronauts who will be responsible for realizing the goals of the Constellation Program. The 2005 Desert RATS was the eighth RATS field test and was the most systems-oriented, integrated field test to date with participants from NASA field centers, the United States Geologic Survey (USGS), industry partners, and research institutes. Each week of the test, the 2005 RATS addressed specific sets of objectives. The first week focused on the performance of surface science astro-biological sampling operations, including planetary protection considerations and procedures. The second week supported evaluation of the Science, Crew, Operations, and Utility Testbed (SCOUT) proto-type rover and its sub-systems. Throughout the duration of the field test, the Communications, Avionics, and Infomatics pack (CAI-pack) was tested. This year the CAI-pack served to provide information on surface navigation, science sample collection procedures, and EVA timeline awareness. Additionally, 2005 was the first

  15. Publications of the U.S. Army Engineer Research and Development Center; Appendix A: January 2016 December 2016

    Science.gov (United States)

    2017-05-01

    ER D C/ IT L SR -1 7- 1 Publications of the U.S. Army Engineer Research and Development Center Appendix A: January 2016-December 2016...The U.S. Army Engineer Research and Development Center (ERDC) solves the nation’s toughest engineering and environmental challenges. ERDC develops ...Engineer Research and Development Center Appendix A: January 2016-December 2016 Compiled by James A. Dolan Information Technology Laboratory U.S

  16. New technologies in gastrointestinal research

    Institute of Scientific and Technical Information of China (English)

    Asbjφrn Mohr Drewes; Hans Gregersen

    2009-01-01

    This issue presents different new techniques aiming to increase our understanding of the gastrointestinal system and to improve treatment. The technologies cover selected methods to evoke and assess gut pain, new methods for imaging and physiological measurements, histochemistry, pharmacological modelling etc. There is no doubt that the methods will revolutionize the diagnostic approach in near future.

  17. Applying User Centered Design to Research Work

    Energy Technology Data Exchange (ETDEWEB)

    Scholtz, Jean; Love, Oriana J.; Pike, William A.; Bruce, Joseph R.; Kim, Dee DH; McBain, Arthur S.

    2014-07-01

    The SuperIdentity (SID) research project is a collaboration between six universities in the UK (Bath, Dundee, Kent, Leicester, Oxford, and Southampton) and the Pacific Northwest National Laboratory (PNNL). SID offers an innovative and exciting new approach to the concept of identity. The assumption underlying our hypothesis is that while there may be many dimensions to an identity - some more stable than others - all should ultimately reference back to a single core identity or a 'SuperIdentity.' The obvious consequence is that identification is improved by the combination of measures. Our work at PNNL has focused on the developing use cases to use in developing a model of identity and in developing visualizations for both researchers to explore the model and in the future for end users to use in determining various paths that may be possible to obtain various identity attributes from a set that is already known.

  18. A National Coordinating Center for Trauma Research

    Science.gov (United States)

    2016-10-01

    the Itamar Watch- PAT 200 • Time to maximal pain relief – time taken to achieve lowest pain rating on NAS from the time that each wound care procedure...sympathetic reactivity using the Itamar Watch- PAT 200 • Trauma Resilience using the Trauma Resilience Scale • Optimism using the Life Orientation Test...informed consent in emergency research? J Trauma Acute Care Surg 79(3):364–371, 2015. 26. Zolin SJ, Vodovotz Y, Forsythe RM, Rosengart MR, Namas R, Brown

  19. [Promoting research in a medical center--the management narrative].

    Science.gov (United States)

    Halevy, Jonathan; Turner, Dan

    2014-12-01

    Promoting research within a medical institute is a delicate balance between the importance of facilitating academia and maximizing resources towards the primary goal of a hospital--healing sick people. Shaare Zedek Medical Center have successfully adopted a "niche" approach to research in which the hospital invests in selected talented clinicians-scientists rather than futile expectation that all clinicians would be engaged in high impact research. Moreover, these research excellence centers are developing into a driving force to also foster research endeavors of other clinicians and residents in the hospital. In this special issue of Harefuah honoring Shaare Zedek investigators, 18 manuscripts included reflect the diversity of research projects performed in the medical center. We believe that this project will assist and encourage clinicians to be engaged in research, at all levels and disciplines.

  20. Refractory Research Group - U.S. DOE, Albany Research Center [Institution Profile

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, James P.

    2004-09-01

    The refractory research group at the Albany Research Center (ARC) has a long history of conducting materials research within the U.S. Bureau of Mines, and more recently, within the U.S. Dept. of Energy. When under the U.S. Bureau of Mines, research was driven by national needs to develop substitute materials and to conserve raw materials. This mission was accomplished by improving refractory material properties and/or by recycling refractories using critical and strategic materials. Currently, as a U.S. Dept of Energy Fossil Energy field site, research is driven primarily by the need to assist DOE in meeting its vision to develop economically and environmentally viable technologies for the production of electricity from fossil fuels. Research at ARC impacts this vision by: • Providing information on the performance characteristics of materials being specified for the current generation of power systems; • Developing cost-effective, high performance materials for inclusion in the next generation of fossil power systems; and • Solving environmental emission and waste problems related to fossil energy systems. A brief history of past refractory research within the U.S. Bureau of Mines, the current refractory research at ARC, and the equipment and capabilities used to conduct refractory research at ARC will be discussed.

  1. Technology meets research 60 years of CERN technology : selected highlights

    CERN Document Server

    Taylor, Thomas; Treille, Daniel; Wenninger, Horst

    2017-01-01

    "Big" science and advanced technology are known to cross-fertilize. This book emphasizes the interplay between particle physics and technology at CERN that has led to breakthroughs in both research and technology over the laboratory's first 60 years. The innovations, often the work of individuals or by small teams, are illustrated with highlights describing selected technologies from the domains of accelerators and detectors. The book also presents the framework and conditions prevailing at CERN that enabled spectacular advances in technology and contributed to propel the European organization into the league of leading research laboratories in the world. While the book is specifically aimed at providing information for the technically interested general public, more expert readers may also appreciate the broad variety of subjects presented. Ample references are given for those who wish to further explore a given topic.

  2. Thermal Testing Facilities and Efforts at Dryden Flight Research Center

    Science.gov (United States)

    Holguin, Andrew; Kostyk, Christopher B.

    2010-01-01

    This presentation provides the thermal testing panel discussion with an overview of the thermal test facilities at the Dryden Flight Research Center (DFRC) as well as highlights from the thermal test efforts of the past year. This presentation is a little more in-depth than the corresponding material in the center overview presentation.

  3. Intersatellite communications optoelectronics research at the Goddard Space Flight Center

    Science.gov (United States)

    Krainak, Michael A.

    1992-01-01

    A review is presented of current optoelectronics research and development at the NASA Goddard Space Flight Center for high-power, high-bandwidth laser transmitters; high-bandwidth, high-sensitivity optical receivers; pointing, acquisition, and tracking components; and experimental and theoretical system modeling at the NASA Goddard Space Flight Center. Program hardware and space flight opportunities are presented.

  4. Postdoctoral Fellow | Center for Cancer Research

    Science.gov (United States)

    A postdoctoral position is available in the lab of Dr. Steven A. Feldman, Surgery Branch of the National Cancer Institute for a highly-motivated individual to carry out translational research studies aimed at developing and improving novel adoptive T cell therapies for solid cancers. A major focus of the position will utilize gene editing strategies (ZFN and Crispr) to enhance T cell function and/or re-direct T cells by TCR insertion for development of novel personalized cancer therapies based on identifying and targeting immunogenic mutations expressed by a patient’s tumor. 

  5. Constituting Information Technology Research: The Experience of IT Researchers

    Science.gov (United States)

    Pham, Binh; Bruce, Christine; Stoodley, Ian

    2005-01-01

    The collective consciousness of effective groups of researchers is characterized by shared understandings of their research object or territory. In this study, we adopted a phenomenographic approach to investigate information technology (IT) research, and its objects and territories, as they are constituted in the experience of IT researchers.…

  6. Jiangsu Innovative New Drug Research Center (BPW CHINA)

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    @@ Jiangsu Innovative New Drug Research Center Co., Ltd. (BPW CHINA), established on August 8th, 2002, is the first research institute in China which is keeping pace with other international research institutes in the innovative new drugs development. Its sole investor is Basilea Pharmaceutica Ltd.

  7. Molecular Science Research Center annual report

    Energy Technology Data Exchange (ETDEWEB)

    Knotek, M.L.

    1991-01-01

    The Chemical Structure and Dynamics group is studying chemical kinetics and reactions dynamics of terrestrial and atmospheric processes as well as the chemistry of complex waste forms and waste storage media. Staff are using new laser systems and surface-mapping techniques in combination with molecular clusters that mimic adsorbate/surface interactions. The Macromolecular Structure and Dynamics group is determining biomolecular structure/function relationships for processes the control the biological transformation of contaminants and the health effects of toxic substances. The Materials and Interfaces program is generating information needed to design and synthesize advanced materials for the analysis and separation of mixed chemical waste, the long-term storage of concentrated hazardous materials, and the development of chemical sensors for environmental monitoring of various organic and inorganic species. The Theory, Modeling, and Simulation group is developing detailed molecular-level descriptions of the chemical, physical, and biological processes in natural and contaminated systems. Researchers are using the full spectrum of computational techniques. The Computer and Information Sciences group is developing new approaches to handle vast amounts of data and to perform calculations for complex natural systems. The EMSL will contain a high-performance computing facility, ancillary computing laboratories, and high-speed data acquisition systems for all major research instruments.

  8. 77 FR 40590 - Applications for New Awards: Disability and Rehabilitation Research Projects and Centers Program...

    Science.gov (United States)

    2012-07-10

    ... Applications for New Awards: Disability and Rehabilitation Research Projects and Centers Program; Disability... Rehabilitation Research Projects and Centers Program--Disability and Rehabilitation Research Projects--Burn Model... Rehabilitation Research Projects and Centers Program-- Disability and Rehabilitation Research...

  9. USGS Core Research Center (CRC) Collection of Core

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Core Research Center (CRC) was established in 1974 by the U.S. Geological Survey (USGS) to preserve valuable rock cores for use by scientists and educators from...

  10. Center for Urban Environmental Research and Education (CUERE)

    Data.gov (United States)

    Federal Laboratory Consortium — The Center for Urban Environmental Research and Education (CUERE) at UMBC was created in 2001 with initial support from the U.S. Environmental Protection Agency and...

  11. INVISTA to Build a New China Research Center

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    World’s largest nylon and spandex producer establishes the state of art commercial textileresearch center in ChinaINVISTA announced building a new research facility inMainland China in September 23 to further strengthen

  12. Asia's First Bat Research Center Established in Beijing

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ In cooperation with a local government, the CAS Institute of Zoology (IOZ) has established Asia's first bat research and protection center in Fangshan, a southwest suburb of Beijing. Its opening ceremony was held on November 16, 2004.

  13. San Joaquin Valley Aerosol Health Effects Research Center (SAHERC)

    Data.gov (United States)

    Federal Laboratory Consortium — At the San Joaquin Valley Aerosol Health Effects Center, located at the University of California-Davis, researchers will investigate the properties of particles that...

  14. USGS Core Research Center (CRC) Collection of Cuttings

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Core Research Center (CRC) was established in 1974 by the U.S. Geological Survey (USGS) to preserve valuable rock cores for use by scientists and educators from...

  15. San Joaquin Valley Aerosol Health Effects Research Center (SAHERC)

    Data.gov (United States)

    Federal Laboratory Consortium — At the San Joaquin Valley Aerosol Health Effects Center, located at the University of California-Davis, researchers will investigate the properties of particles that...

  16. idaho Accelerator Center Advanced Fuel Cycle Research

    Energy Technology Data Exchange (ETDEWEB)

    Wells, Douglas; Dale, Dan

    2011-10-20

    The technical effort has been in two parts called; Materials Science and Instrumentation Development. The Materials Science technical program has been based on a series of research and development achievements in Positron-Annihilation Spectroscopy (PAS) for defect detection in structural materials. This work is of particular importance in nuclear power and its supporting systems as the work included detection of defects introduced by mechanical and thermal phenomena as well as those caused by irradiation damage. The second part of the program has focused on instrumentation development using active interrogation techniques supporting proliferation resistant recycling methodologies and nuclear material safeguards. This effort has also lead to basic physics studies of various phenomena relating to photo-fission. Highlights of accomplishments and facility improvement legacies in these areas over the program period include

  17. Vaccines for HIV | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    The development of an effective HIV vaccine has been an ongoing area of research. The high variability in HIV-1 virus strains has represented a major challenge in successful development. Ideally, an effective candidate vaccine would provide protection against the majority of clades of HIV. Two major hurdles to overcome are immunodominance and sequence diversity. This vaccine utilizes a strategy for overcoming these two issues by identifying the conserved regions of the virus and exploiting them for use in a targeted therapy. NCI seeks licensees and/or research collaborators to commercialize this technology, which has been validated in macaque models.

  18. Fighting liver cancer with combination immunotherapies | Center for Cancer Research

    Science.gov (United States)

    A new clinical trial testing the effectiveness of immunotherapy treatment combinations against liver cancer is enrolling patients at the NIH Clinical Center in Bethesda, Maryland. Individually, immunotherapy drugs harness the power of the human immune system to better identify and kill cancer cells. Now, researchers at the NIH’s Center for Cancer Research have begun to find evidence that the drugs may work far more effectively when taken in combination with other therapies and with each other than when taken alone.

  19. Computer science research and technology volume 3

    CERN Document Server

    Bauer, Janice P

    2011-01-01

    This book presents leading-edge research from across the globe in the field of computer science research, technology and applications. Each contribution has been carefully selected for inclusion based on the significance of the research to this fast-moving and diverse field. Some topics included are: network topology; agile programming; virtualization; and reconfigurable computing.

  20. Update and Expansion of the Center of Automotive Technology Excellence Under the Graduate Automotive Technology Education (GATE) Program at the University of Tennessee, Knoxville

    Energy Technology Data Exchange (ETDEWEB)

    Irick, David

    2012-08-30

    The Graduate Automotive Technology Education (GATE) Center at the University of Tennessee, Knoxville has completed its seventh year of operation under this agreement, its thirteenth year in total. During this period the Center has involved eleven GATE Fellows and three GATE Research Assistants in preparing them to contribute to advanced automotive technologies in the center’s focus area: Advanced Hybrid Propulsion and Control Systems. In addition to the impact that the Center has had on the students and faculty involved, the presence of the center has led to the acquisition of resources that probably would not have been obtained if the GATE Center had not existed. Significant industry interaction such as equipment donations, and support for GATE students has been realized. The value of the total resources brought to the university (including related research contracts) exceeds $2,000,000.

  1. An organizational survey of the Pittsburgh Energy Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Stock, D.A.; Shurberg, D.A.; Haber, S.B.

    1991-09-01

    An Organizational Survey (OS) was administrated at the Pittsburgh Energy Technology Center (PETC) that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concerns, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of culture''; that is, the values attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization.

  2. An organizational survey of the Pittsburgh Energy Technology Center

    Energy Technology Data Exchange (ETDEWEB)

    Stock, D.A.; Shurberg, D.A.; Haber, S.B.

    1991-09-01

    An Organizational Survey (OS) was administrated at the Pittsburgh Energy Technology Center (PETC) that queried employees on the subjects of organizational culture, various aspects of communications, employee commitment, work group cohesion, coordination of work, environmental, safety, and health concerns, hazardous nature of work, safety and overall job satisfaction. The purpose of the OS is to measure in a quantitative and objective way the notion of ``culture``; that is, the values attitudes, and beliefs of the individuals working within the organization. In addition, through the OS, a broad sample of individuals can be reached that would probably not be interviewed or observed during the course of a typical assessment. The OS also provides a descriptive profile of the organization at one point in time that can then be compared to a profile taken at a different point in time to assess changes in the culture of the organization.

  3. A review of user-centered design for diabetes-related consumer health informatics technologies.

    Science.gov (United States)

    LeRouge, Cynthia; Wickramasinghe, Nilmini

    2013-07-01

    User-centered design (UCD) is well recognized as an effective human factor engineering strategy for designing ease of use in the total customer experience with products and information technology that has been applied specifically to health care information technology systems. We conducted a literature review to analyze the current research regarding the use of UCD methods and principles to support the development or evaluation of diabetes-related consumer health informatics technology (CHIT) initiatives. Findings indicate that (1) UCD activities have been applied across the technology development life cycle stages, (2) there are benefits to incorporating UCD to better inform CHIT development in this area, and (3) the degree of adoption of the UCD process is quite uneven across diabetes CHIT studies. In addition, few to no studies report on methods used across all phases of the life cycle with process detail. To address that void, the Appendix provides an illustrative case study example of UCD techniques across development stages.

  4. The Use of DOE Technologies at The World Trade Center Incident: Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    McCabe, B.; Kovach, J.; Carpenter, C.; Blair, D.

    2003-02-25

    In response to the attack of the World Trade Center (WTC) on September 11, 2001, the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) assembled and deployed a HAZMAT Emergency Management Team (Team) to the disaster site (Site). The response team consisted of a Certified Industrial Hygienist and a rotating team of industrial hygienists, safety professionals, and certified HAZMAT instructors. Through research funded by the Department of Energy (DOE) Office of Environmental Management (EM) and managed by the National Energy Technology Laboratory (NETL), the IUOE conducted human factors assessments on baseline and innovative technologies during real-world conditions and served as an advocate at the WTC disaster site to identify opportunities for the use and evaluation of DOE technologies. From this work, it is clear that opportunities exist for more DOE technologies to be made readily available for use in future emergencies.

  5. The Nursing Research Center on HIV/AIDS Health Disparities.

    Science.gov (United States)

    Holzemer, William L; Méndez, Marta Rivero; Portillo, Carmen; Padilla, Geraldine; Cuca, Yvette; Vargas-Molina, Ricardo L

    2004-01-01

    This report describes the partnership between the schools of nursing at the University of California San Francisco and the University of Puerto Rico to address the need for nursing research on HIV/AIDS health disparities. The partnership led to the creation of the Nursing Research Center on HIV/AIDS Health Disparities with funding from the National Institutes of Health/National Institute of Nursing Research. We provide background information on the disproportionate impact of the HIV/AIDS epidemic on racial and ethnic minorities, describe the major predictors of health disparities in persons at risk for or diagnosed with HIV/AIDS using the Outcomes Model for Health Care Research, and outline the major components of the Nursing Research Center. The center's goal is to improve health outcomes for people living with and affected by HIV/AIDS by enhancing the knowledge base for HIV/AIDS care.

  6. Air Force Research Laboratory Technology Milestones 2008

    Science.gov (United States)

    2008-01-01

    develop a unique measurement platform employing tunable diode laser absorption spectroscopy ( TDLAS ). The TDLAS platform provides a novel approach to...conduct research in the exploration and development of fundamental hypersonic aerospace technologies. TDLAS experiments are scheduled for three of...team expects that the TDLAS measurement platform will achieve Technology Readiness Level 6 status (i.e., system/subsystem model or prototype

  7. Research and technology, fiscal year 1982

    Science.gov (United States)

    1982-01-01

    Advanced studies are reviewed. Atmospheric sciences, magnetospheric physics, solar physics, gravitational physics, astronomy, and materials processing in space comprise the research programs. Large space systems, propulsion technology, materials and processes, electrical/electronic systems, data bases/design criteria, and facilities development comprise the technology development activities.

  8. Northwest Hazardous Waste Research, Development, and Demonstration Center: Program Plan. [Contains glossary

    Energy Technology Data Exchange (ETDEWEB)

    1988-02-01

    The Northwest Hazardous Waste Research, Development, and Demonstration Center was created as part of an ongoing federal effort to provide technologies and methods that protect human health and welfare and environment from hazardous wastes. The Center was established by the Superfund Amendments and Reauthorization Act (SARA) to develop and adapt innovative technologies and methods for assessing the impacts of and remediating inactive hazardous and radioactive mixed-waste sites. The Superfund legislation authorized $10 million for Pacific Northwest Laboratory to establish and operate the Center over a 5-year period. Under this legislation, Congress authorized $10 million each to support research, development, and demonstration (RD and D) on hazardous and radioactive mixed-waste problems in Idaho, Montana, Oregon, and Washington, including the Hanford Site. In 1987, the Center initiated its RD and D activities and prepared this Program Plan that presents the framework within which the Center will carry out its mission. Section 1.0 describes the Center, its mission, objectives, organization, and relationship to other programs. Section 2.0 describes the Center's RD and D strategy and contains the RD and D objectives, priorities, and process to be used to select specific projects. Section 3.0 contains the Center's FY 1988 operating plan and describes the specific RD and D projects to be carried out and their budgets and schedules. 9 refs., 18 figs., 5 tabs.

  9. Science, Technology and Arts Research Journal

    African Journals Online (AJOL)

    Science, Technology and Arts Research Journal ... Determination of Nutritive Value and Mineral Elements of Some Species of Genus Memecylon Linn. ... towards Gender and Intimate Partner Violence Against Women in Eastern Ethiopia: A ...

  10. The Europlanet Research Infrastructure and Technology Foresight

    Science.gov (United States)

    Grande, M.; Europlanet Community

    2016-10-01

    The Europlanet 2020 Research Infrastructure is a project to integrate and support planetary science activities across Europe. The project is funded under the European Commission's Horizon 2020 programme. Technology Foresight is a key activity.

  11. Environmentally Friendly Propylene/Propane Recovery Process Increases Economic Benefits to Daqing Chemical Research Center

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ "The process for recovering propylene/propane from Oxo-synthesis purge gas" performed by Daqing Chemical Re-search Center has been granted the Heilongjiang Governor's Special Award. This technology since its application at Daqing Petrochemical Company starting at the end of 2001 has contributed to effective materials utilization and envi-ronmental protection.

  12. Coral Research Data from NOAA's Undersea Research Center, North Atlantic and Great Lakes Region, NOAA's Undersea Research Program (NURP)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's Undersea Research Center for the NOAA's Undersea Research Center for the North Atlantic and Great Lakes region (NAGL) explores and studies the waters off the...

  13. Nanoscale Science, Engineering and Technology Research Directions

    Energy Technology Data Exchange (ETDEWEB)

    Lowndes, D. H.; Alivisatos, A. P.; Alper, M.; Averback, R. S.; Jacob Barhen, J.; Eastman, J. A.; Imre, D.; Lowndes, D. H.; McNulty, I.; Michalske, T. A.; Ho, K-M; Nozik, A. J.; Russell, T. P.; Valentin, R. A.; Welch, D. O.; Barhen, J.; Agnew, S. R.; Bellon, P.; Blair, J.; Boatner, L. A.; Braiman, Y.; Budai, J. D.; Crabtree, G. W.; Feldman, L. C.; Flynn, C. P.; Geohegan, D. B.; George, E. P.; Greenbaum, E.; Grigoropoulos, C.; Haynes, T. E.; Heberlein, J.; Hichman, J.; Holland, O. W.; Honda, S.; Horton, J. A.; Hu, M. Z.-C.; Jesson, D. E.; Joy, D. C.; Krauss, A.; Kwok, W.-K.; Larson, B. C.; Larson, D. J.; Likharev, K.; Liu, C. T.; Majumdar, A.; Maziasz, P. J.; Meldrum, A.; Miller, J. C.; Modine, F. A.; Pennycook, S. J.; Pharr, G. M.; Phillpot, S.; Price, D. L.; Protopopescu, V.; Poker, D. B.; Pui, D.; Ramsey, J. M.; Rao, N.; Reichl, L.; Roberto, J.; Saboungi, M-L; Simpson, M.; Strieffer, S.; Thundat, T.; Wambsganss, M.; Wendleken, J.; White, C. W.; Wilemski, G.; Withrow, S. P.; Wolf, D.; Zhu, J. H.; Zuhr, R. A.; Zunger, A.; Lowe, S.

    1999-01-01

    This report describes important future research directions in nanoscale science, engineering and technology. It was prepared in connection with an anticipated national research initiative on nanotechnology for the twenty-first century. The research directions described are not expected to be inclusive but illustrate the wide range of research opportunities and challenges that could be undertaken through the national laboratories and their major national scientific user facilities with the support of universities and industry.

  14. Energy Efficient Industrialized Housing Research Program, Center for Housing Innovation, University of Oregon and the Florida Solar Energy Center

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.Z.

    1990-01-01

    This research program addresses the need to increase the energy efficiency of industrialized housing. Two research centers have responsibility for the program: the Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. The two organizations provide complementary architectural, systems engineering, and industrial engineering capabilities. In 1989 we worked on these tasks: (1) the formation of a steering committee, (2) the development of a multiyear research plan, (3) analysis of the US industrialized housing industry, (4) assessment of foreign technology, (5) assessment of industrial applications, (6) analysis of computerized design and evaluation tools, and (7) assessment of energy performance of baseline and advanced industrialized housing concepts. The current research program, under the guidance of a steering committee composed of industry and government representatives, focuses on three interdependent concerns -- (1) energy, (2) industrial process, and (3) housing design. Building homes in a factory offers the opportunity to increase energy efficiency through the use of new materials and processes, and to increase the value of these homes by improving the quality of their construction. Housing design strives to ensure that these technically advanced homes are marketable and will meet the needs of the people who will live in them.

  15. NASA Ames Research Center 60 MW Power Supply Modernization

    Science.gov (United States)

    Choy, Yuen Ching; Ilinets, Boris V.; Miller, Ted; Nagel, Kirsten (Technical Monitor)

    2001-01-01

    The NASA Ames Research Center 60 MW DC Power Supply was built in 1974 to provide controlled DC power for the Thermophysics Facility Arc Jet Laboratory. The Power Supply has gradually losing reliability due to outdated technology and component life limitation. NASA has decided to upgrade the existing rectifier modules with contemporary high-power electronics and control equipment. NASA plans to complete this project in 2001. This project includes a complete replacement of obsolete thyristor stacks in all six rectifier modules and rectifier bridge control system. High power water-cooled thyristors and freewheeling diodes will be used. The rating of each of the six modules will be 4000 A at 5500 V. The control firing angle signal will be sent from the Facility Control System to six modules via fiberoptic cable. The Power Supply control and monitoring system will include a Master PLC in the Facility building and a Slave PLC in each rectifier module. This system will also monitor each thyristor level in each stack and the auxiliary equipment.

  16. Novel omics technologies in nutrition research.

    Science.gov (United States)

    Zhang, Xuewu; Yap, Yeeleng; Wei, Dong; Chen, Gu; Chen, Feng

    2008-01-01

    A key scientific objective of nutrition research is to determine the role of diet in metabolic regulation and to improve health. There are many new opportunities and challenges for the nutrition research in post-genome era. Novel omics technologies and bioinformatics tools offer enormous potential to investigate the complex relationship between nutrition and metabolism. An overview of omics technologies in nutrition research is presented in this paper, which focuses on recent applications of nutritranscriptomics, nutriproteomics and nutrimetabolomics in nutrition research. The potential limitations and future prospects are also discussed. The combination of various omics technologies, systems biology, will greatly facilitate the discovery of new biomarkers associated with specific nutrients or other dietary factors. It can be expected that the future omics-based human nutrition research can provide personalized dietary recommendations for disease prevention.

  17. Social technologies and socialization of research

    Directory of Open Access Journals (Sweden)

    Jos Leijten

    2009-09-01

    Full Text Available Whether we like it or not, and how many difficulties this may pose, scientific research and technology are becoming the “property” of everybody and increasingly will become subject of public guidance and political decision making. Socialization happens because what people think, want and do has become central to the development of science and technology. Socialization of research is simply happening because it is the development characteristic of a society in which knowledge is becoming the main driving force. And just like in agricultural or industrial societies in the past it leads to (re-invent the institutions and mechanisms which allow the knowledge society to function properly.This note will further explore the developments contributing to the socialization of research and their impact on research and research institutes. It will focus more on technologies than on science per se, because applications and usage will become the main drivers.

  18. [Pharmaceutical technology: development and research].

    Science.gov (United States)

    Traisnel, M

    1994-06-01

    Production of pharmaceutics cannot be compared to the manufacture of consumer goods: pharmaceutical manufacturing is the study and bulk manufacture of the ingredients from which medicines are made, and is concerned with the mixing, preparing, packing, of the ingredients into a dosage form for the patient, in according to the good manufacturing practices (GMP). Development and manufacture are not discrete activities but links in a single chain of activity. Research and development, pharmaceutical training, regulatory requirements: these concepts are present with three ways: bioavailability, targeting and compliance.

  19. Expert panel reviews of research centers: the site visit process.

    Science.gov (United States)

    Lawrenz, Frances; Thao, Mao; Johnson, Kelli

    2012-08-01

    Site visits are used extensively in a variety of settings within the evaluation community. They are especially common in making summative value decisions about the quality and worth of research programs/centers. However, there has been little empirical research and guidance about how to appropriately conduct evaluative site visits of research centers. We review the processes of two site visit examples using an expert panel review: (1) a process to evaluate four university research centers and (2) a process to review a federally sponsored research center. A set of 14 categories describing the expert panel review process was obtained through content analysis and participant observation. Most categories were addressed differently through the two processes highlighting the need for more research about the most effective processes to use within different contexts. Decisions about how to structure site visits appear to depend on the research context, practical considerations, the level at which the review is being conducted and the intended impact of the report. Future research pertaining to the selection of site visitors, the autonomy of the visitors in data collection and report writing, and the amount and type of information provided would be particularly valuable.

  20. 78 FR 55731 - Health Workforce Research Center Cooperative Agreement Program

    Science.gov (United States)

    2013-09-11

    ... workforce policy and planning questions. Though the FOA indicated the intent to fund only one cooperative... HUMAN SERVICES Health Resources and Services Administration Health Workforce Research Center Cooperative...: The Bureau of Health Professions (BHPr) is announcing a change to its Health Workforce Research...

  1. WIDE Research Center as an Incubator for Graduate Student Experience

    Science.gov (United States)

    Turner, Heather Noel; Nguyen, Minh-Tam; Keller, Beth; Sackey, Donnie Johnson; Ridolfo, Jim; Pigg, Stacey; Lauren, Benjamin; Potts, Liza; Hart-Davidson, Bill; Grabill, Jeff

    2017-01-01

    This article describes graduate mentorship experiences at the Writing, Information, and Digital Experience (WIDE) research center at Michigan State University and offers a stance on graduate student mentorship. It describes WIDE's mentorship model as feminist and inclusive and as a means to invite researchers with different backgrounds to engage…

  2. NASA Space Engineering Research Center for VLSI systems design

    Science.gov (United States)

    1991-01-01

    This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design.

  3. BioServe space technologies: A NASA Center for the Commercial Development of Space

    Science.gov (United States)

    1992-01-01

    BioServe Space Technologies, a NASA Center for the Commercial Development of Space (CCDS), was established in 1987. As is characteristic of each CCDS designated by NASA, the goals of this commercial center are aimed at stimulating high technology research that takes advantage of the space environment and at leading in the development of new products and services which have commercial potential or that contribute to possible new commercial ventures. BioServe's efforts in these areas focus upon space life science studies and the development of enabling devices that will facilitate ground-based experiments as well as the conversion of such to the microgravity environment. A direct result of BioServe's hardware development and life sciences studies is the training of the next generation of bioengineers who will be knowledgeable and comfortable working with the challenges of the space frontier.

  4. Qualitative Methods in Patient-Centered Outcomes Research.

    Science.gov (United States)

    Vandermause, Roxanne; Barg, Frances K; Esmail, Laura; Edmundson, Lauren; Girard, Samantha; Perfetti, A Ross

    2017-02-01

    The Patient-Centered Outcomes Research Institute (PCORI), created to fund research guided by patients, caregivers, and the broader health care community, offers a new research venue. Many (41 of 50) first funded projects involved qualitative research methods. This study was completed to examine the current state of the science of qualitative methodologies used in PCORI-funded research. Principal investigators participated in phenomenological interviews to learn (a) how do researchers using qualitative methods experience seeking funding for, implementing and disseminating their work; and (b) how may qualitative methods advance the quality and relevance of evidence for patients? Results showed the experience of doing qualitative research in the current research climate as "Being a bona fide qualitative researcher: Staying true to research aims while negotiating challenges," with overlapping patterns: (a) researching the elemental, (b) expecting surprise, and (c) pushing boundaries. The nature of qualitative work today was explicitly described and is rendered in this article.

  5. A snapshot of research in learning technology

    Directory of Open Access Journals (Sweden)

    Rhona Sharpe

    2010-12-01

    Full Text Available The papers in this issue present a convenient snapshot of current research in learning technology, both in their coverage of the issues that concern us and the methods that are being used to investigate them. This issue shows that e-learning researchers are interested in: what technologies are available and explorations of their potential (Nie et al. explore the role of podcasting, how to design technology-mediated learning activities in ways which support specific learning outcomes (Simpson evaluates the role of ‘book raps' in supporting critical thinking, the identification of critical success factors in implementations (Cochrane's observation of three mobile learning projects and how such e-learning initiatives can be sustained within an institutional context (Gunn's examination of the challenges of embedding ‘grass roots' initiatives. Finally e-learning research is concerned with investigating the impact of emerging technologies on education – in this case Traxler's discussion of mobile, largely student-owned, devices. Together these five papers demonstrate the scope of research in learning technology and it is with this in mind that we will soon be referring to this journal by its subtitle: Research in Learning Technology.

  6. Compendium of Education Technology Research Funded by NCER and NCSER: 2002-2014. NCER 2017-0001

    Science.gov (United States)

    Yamaguchi, Ryoko; Hall, Adam

    2017-01-01

    Between 2002 and 2014, the Institute of Education Sciences (Institute) supported over 400 projects focused on education technology through the National Center for Education Research (NCER) and the National Center for Special Education Research (NCSER). The majority of this work has been funded through Education Technology research topics of NCER…

  7. Recent expansion of research for light water reactor technology

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, Kiichi (Japan Electric Power Information Center, Tokyo (Japan)); Nemoto, Kazuyasu; Aoki, Norichika; Kusanagi, Hideo

    1990-09-01

    It is needless to say that for simultaneously coping with the increase of energy consumption and the prevention of the worsening of environment in the world, and for maintaining the standard of living in Japan where energy resources are scarce, the development of atomic energy is necessary. Though the technology of LWRs has been already established, the efforts of aiming at the further high safety and reliability of LWRs must be exerted. In this report, the recent technical development is described, centering around the research and technical development promoted by the Central Research Institute of Electric Power Industry. The energy consumption in the world recorded the yearly growth of about 3%, and in 1987, it was 9.65 billion tons in terms of coal (7000 kcal/kg). The problems of earth environment will relax by promoting atomic energy. As for the recent development of LWR technology, the research on existing LWRs, the research on the LWRs of next generation, the research on the new technology for locating nuclear facilities and the research on radiation are carried out. As the research aiming at the LWRs of next generation, the design and evaluation of statically safe LWRs, the evaluation of fuel behavior at high burnup and the development of new location technology are carried out. (K.I.).

  8. Spaceflight revolution: NASA Langley Research Center from Sputnik to Apollo

    Science.gov (United States)

    Hansen, James R.

    1995-01-01

    As part of the transition to the broad research scope of the National Aeronautics and Space Administration (NASA) starting in the late 1950's, the Langley Research Center underwent many changes in program content, organization and management, and areas of personnel expertise. This book describes and evaluates the evolution and activities of the Langley Research Center during the seventeen-year period from 1958 to 1975. The book was based on the analysis of hundreds of written records, both published and unpublished, as well as numerous personal interviews with many of the key individuals involved in the transition of Langley. Some of the projects and research areas covered include Project Echo, magnetoplasmadynamics research, Scout Rocket Program, lunar-orbit rendezvous research, manned space laboratory development, and Apollo and the Lunar Orbiter Project.

  9. Establishing a national research center on day care

    DEFF Research Database (Denmark)

    Ellegaard, Tomas

    The paper presents and discusses the current formation of a national research center on ECEC. The center is currently being established. It is partly funded by the Danish union of early childhood and youth educators. It is based on cooperation between a number of Danish universities and this nati...... current new public management policies. However there is also more conflicting issues that emerge in this enterprise – especially on interests, practice relevance and knowledge paradigms....

  10. Survey Of Wind Tunnels At Langley Research Center

    Science.gov (United States)

    Bower, Robert E.

    1989-01-01

    Report presented at AIAA 14th Aerodynamic Testing Conference on current capabilities and planned improvements at NASA Langley Research Center's major wind tunnels. Focuses on 14 major tunnels, 8 unique in world, 3 unique in country. Covers Langley Spin Tunnel. Includes new National Transonic Facility (NTF). Also surveys Langley Unitary Plan Wind Tunnel (UPWT). Addresses resurgence of inexpensive simple-to-operate research tunnels. Predicts no shortage of tools for aerospace researcher and engineer in next decade or two.

  11. Survey Of Wind Tunnels At Langley Research Center

    Science.gov (United States)

    Bower, Robert E.

    1989-01-01

    Report presented at AIAA 14th Aerodynamic Testing Conference on current capabilities and planned improvements at NASA Langley Research Center's major wind tunnels. Focuses on 14 major tunnels, 8 unique in world, 3 unique in country. Covers Langley Spin Tunnel. Includes new National Transonic Facility (NTF). Also surveys Langley Unitary Plan Wind Tunnel (UPWT). Addresses resurgence of inexpensive simple-to-operate research tunnels. Predicts no shortage of tools for aerospace researcher and engineer in next decade or two.

  12. FY03 Engineering Technology Reports Laboratory Directed Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C

    2004-03-05

    This report summarizes the science and technology research and development efforts in Lawrence Livermore National Laboratory's Engineering Directorate for FY2003, and exemplifies Engineering's 50-year history of researching and developing the engineering technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence, and has prepared for this role with a skilled workforce and the technical resources developed through venues like the Laboratory Directed Research and Development Program (LDRD). This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Engineering's investment in technologies is carried out through two programs, the LDRD program and the ''Tech Base'' program. LDRD is the vehicle for creating those technologies and competencies that are cutting edge, or that require a significant level of research, or contain some unknown that needs to be fully understood. Tech Base is used to apply those technologies, or adapt them to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice.'' Therefore, the LDRD report covered here has a strong research emphasis. Areas that are presented all fall into those needed to accomplish our mission. For FY2003, Engineering's LDRD projects were focused on mesoscale target fabrication and characterization, development of engineering computational capability, material studies and modeling, remote sensing and communications, and microtechnology and nanotechnology for national security applications. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, are responsible for guiding the science and technology investments for the Directorate. The Centers represent technology

  13. Two-Phase Technology at NASA/Johnson Space Center

    Science.gov (United States)

    Ungar, Eugene K.; Nicholson, Leonard S. (Technical Monitor)

    1999-01-01

    Since the baseline International Space Station (ISS) External Active Thermal Control System (EATCS) was changed from a two-phase mechanically pumped system to a single phase cascade system in the fall of 1993, two-phase EATCS research has continued at a low level at JSC. One of-the lessons of the ISS EATCS selection was that two-phase thermal control systems must have significantly lower power than comparable single phase systems to overcome their larger radiator area, larger line and fluid mass, and perceived higher technical risk. Therefore, research at JSC has concentrated on low power mechanically pumped two-phase EATCSs. In the presentation, the results of a study investigating the trade of single and two-phase mechanically pumped EATCSs for space vehicles will be summarized. The low power two-phase mechanically pumped EATCS system under development at JSC will be described in detail and the current design status of the subscale test unit will be reviewed. Also, performance predictions for a full size EATCS will be presented. In addition to the discussion of two-phase mechanically pumped EATCS development at JSC, two-phase technologies under development for biological water processing will be discussed. These biological water processor technologies are being prepared for a 2001 flight experiment and subsequent usage on the TransHab module on the International Space Station.

  14. 76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

    Science.gov (United States)

    2011-06-17

    ..., Detroit, MI; UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including... Center, Technology Training Joint Programs Staff, Detroit, Michigan (TA-W-71,047) and Warren, Michigan..., Technology Training Joint Programs Staff. The Department has determined that these workers were...

  15. FY08 Engineering Research and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; McNichols, D

    2009-02-24

    This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2008. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: 'Enable program success today and ensure the Laboratory's vitality tomorrow.' Engineering's mission is carried out through basic research and technology development. Research is the vehicle for creating competencies that are cutting-edge, or require discovery-class groundwork to be fully understood. Our technology efforts are discipline-oriented, preparing research breakthroughs for broader application to a variety of Laboratory needs. The term commonly used for technology-based projects is 'reduction to practice.' As we pursue this two-pronged approach, an enormous range of technological capabilities result. This report combines our work in research and technology into one volume, organized into thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Engineering Systems for Knowledge and Inference; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.

  16. Reduced Crew Operations Research at NASA Ames Research Center

    Science.gov (United States)

    Brandt, Summer L.; Lachter, Joel

    2017-01-01

    In 2012, NASA began exploring the feasibility of single pilot reduced crew operations (SPORCO) in the context of scheduled passenger air carrier operations (i.e., Parts 121 and 135). This research was spurred by two trends in aviation research: the trend toward reducing costs and a shortage of pilots. A series of simulations were conducted to develop tools and a concept of operations to support RCO. This slide deck is a summary of the NASA Ames RCO research prepared for an R T team at Airbus. Airbus is considering moving forward with reducing crew during the cruise phase of flight with long-haul flights and is interested in the work we have completed.

  17. Development of a National Center for Hydrogen Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jay C. Almlie; Bruce Wood; Rich Schlupp

    2007-03-01

    In November 2005, the Energy & Environmental Research Center (EERC), ePowerSynergies, Inc. (ePSI), and Resurfice Corporation teamed to develop, produce, and demonstrate the world's first and only fuel cell-powered ice resurfacer. The goals of this project were: {sm_bullet} To educate the public on the readiness, practicality, and safety of fuel cells powered by hydrogen fuel and {sm_bullet} To establish a commercialization pathway in an early-adopter, niche market. The vehicle was developed and produced in a short 3-month span. The vehicle made its world debut at U.S. Senator Byron Dorgan's (D-ND) 2005 Hydrogen Energy Action Summit. Subsequently, the vehicle toured North America appearing at numerous public events and conferences, receiving much attention from international media outlets.

  18. Health Information Technology Adoption in California Community Health Centers

    Science.gov (United States)

    Kim, Katherine K.; Rudin, Robert S.; Wilson, Machelle D.

    2016-01-01

    Objectives National and state initiatives to spur adoption of electronic health record (EHR) use and health information exchange (HIE) among providers in rural and underserved communities have been in place for 15 years. Our goal was to systematically assess the impact of these initiatives by quantifying the level of adoption and key factors associated with adoption among community health centers (CHCs) in California. Study Design Cross-sectional statewide survey. Methods We conducted a telephone survey of all California primary care CHCs from August to September 2013. Multiple logistic regressions were fit to test for associations between various practice characteristics and adoption of EHRs, Meaningful Use (MU)–certified EHRs, and HIE. For the multivariable model, we included those variables which were significant at the P = .10 level in the univariate tests. Results We received responses from 194 CHCs (73.5% response rate). Adoption of any EHRs (80.3%) and MU–certified EHRs (94.6% of those with an EHR) was very high. Adoption of HIE is substantial (48.7%) and took place within a few years (mean = 2.61 years; SD = 2.01). More than half (54.7%) of CHCs are able to receive data into the EHR, indicating some level of interoperability. Patient engagement capacity is moderate, with 21.6% offering a personal health record, and 55.2% electronic visit summaries. Rural location and belonging to a multi-site clinic organization both increase the odds of adoption of EHRs, HIE, and electronic visit summary, with odds ratios ranging from 0.63 to 3.28 (all P values <.05). Conclusions Greater adoption of health information technology (IT) in rural areas may be the result of both federal and state investments. As CHCs lack access to capital for investments, continued support of technology infrastructure may be needed for them to further leverage health IT to improve healthcare. PMID:26760431

  19. Office of Industrial Technologies research in progress

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

  20. American Alligator Research on the Kennedy Space Center

    Science.gov (United States)

    Lowers, Russell H.

    2010-01-01

    This slide presentation reviews the research conducted at the Kennedy Space Center on the American Alligator. The objectives of the research were to establish life history baseline at the Kennedy Space Center and at the Merit Island National Wildlife Reserve (MINWR). Some of the factors that were examined are: nesting success, movement patterns, and population structure. Another objective was to determine the overall health of the alligator population, by analyzing blood and tissue chemistry, and urine analysis. A third objective was to compare alligators at KSC/MINWR to the statewide population. Some of the results are shown in charts and graphs.

  1. Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

  2. Technology evaluation center assessment synopsis: full-field digital mammography.

    Science.gov (United States)

    Rothenberg, Barbara M; Ziegler, Kathleen M; Aronson, Naomi

    2006-08-01

    Full-field digital mammography (FFDM) is proposed as an alternative to screen-film mammography (SFM). The ability to separate and optimize the acquisition, storage, and display of images may allow greater visualization of breast cancers at equal or lower radiation doses, especially in younger women and those with denser breasts. This is a synopsis of a systematic review by the Blue Cross Blue Shield Association Technology Evaluation Center. This updated systematic review primarily incorporated the results of the ACR Imaging Network(R) Digital Mammographic Imaging Screening Trial (DMIST), which provided results on 42,760 asymptomatic women who underwent both FFDM and SFM and showed with reasonable certainty that there was no difference in the accuracy of the 2 modalities for asymptomatic women in general, with some advantages of FFDM in certain subgroups. There were no strong, new studies on the use of digital mammography compared with film mammography in a diagnostic population. However, the DMIST results indicated that tumors detected by FFDM, but not by SFM, were likely to be invasive carcinomas or medium-grade to high-grade ductal carcinoma in situ. On the basis of the suppositions that these are the cancers of greatest interest and the ones more likely to be found in a diagnostic population and that the diagnostic population may be younger on average than the screening population, it was concluded that there is sufficient evidence to support the use of FFDM for diagnostic purposes.

  3. Turbine Inflow Characterization at the National Wind Technology Center: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Clifton, A.; Schreck, S.; Scott, G.; Kelley, N.; Lundquist, J.

    2012-01-01

    Utility-scale wind turbines operate in dynamic flows that can vary significantly over timescales from less than a second to several years. To better understand the inflow to utility-scale turbines, two inflow towers were installed and commissioned at the National Renewable Energy Laboratory's (NREL) National Wind Technology Center near Boulder, Colorado, in 2011. These towers are 135 m tall and instrumented with a combination of sonic anemometers, cup anemometers, wind vanes, and temperature measurements to characterize the inflow wind speed and direction, turbulence, stability and thermal stratification to two utility-scale turbines. Herein, we present variations in mean and turbulent wind parameters with height, atmospheric stability, and as a function of wind direction that could be important for turbine operation as well as persistence of turbine wakes. Wind speed, turbulence intensity, and dissipation are all factors that affect turbine performance. Our results shown that these all vary with height across the rotor disk, demonstrating the importance of measuring atmospheric conditions that influence wind turbine performance at multiple heights in the rotor disk, rather than relying on extrapolation from lower levels.

  4. ZHAO HANG President of China Automotive Technology & Research Center Vice Chairman & General Secretary of SAC/ TC 114%赵航中国汽车技术研究中心主任 全国汽车标准化技术委员会副主任委员兼秘书长

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Zhao Hang,Senior Engineer at profession level,President of China Automotive Technology & Research Center (CATARC),Deputy Director and Secretary General of National Technical Committee of Auto Standardization (SAC/TC 114),Vice Chairman of Society of Automotive Engineers of China,Deputy President of China Association of Automobile Manufacturers and Chairman o fits subassociation of information,Member of the leading group of the national Project 863 of electric vehide,Member of the leading group of the national dean energy vehicle project,and one of the 50 Outstanding Figures in the 50 years' history of China's auto industry,enjoys special allowance from government.

  5. Contributions of mobile technologies to addiction research.

    Science.gov (United States)

    Swendsen, Joel

    2016-06-01

    Mobile technologies are revolutionizing the field of mental health, and particular progress has been made in their application to addiction research and treatment. The use of smartphones and other mobile devices has been shown to be feasible with individuals addicted to any of a wide range of substances, with few biases being observed concerning the repeated monitoring of daily life experiences, craving, or substance use. From a methodological point of view, the use of mobile technologies overcomes longstanding limitations of traditional clinical research protocols, including the more accurate assessment of temporal relationships among variables, as well as the reduction in both contextual constraints and discipline-specific methodological isolation. The present article presents a conceptual review of these advances while using illustrations of research applications that are capable of overcoming specific methodological barriers. Finally, a brief review of both the benefits and risks of mobile technology use for the treatment of patients will be addressed.

  6. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center

    Science.gov (United States)

    1976-01-01

    Updated information is given pertaining to Technology Use Studies Center (TUSC) clients who are those that receive/use information as disseminated by the center. The client information is presented as a continuation of client data as set forth in the center's previous annual report.

  7. 76 FR 38134 - Final Priorities; Disability and Rehabilitation Research Projects and Centers Program-Disability...

    Science.gov (United States)

    2011-06-29

    ... Final Priorities; Disability and Rehabilitation Research Projects and Centers Program--Disability...; Disability and Rehabilitation Research Projects and Centers Program--Disability Rehabilitation Research Projects (DRRP)--Americans with Disabilities Act (ADA) National Network Regional Centers (formerly the...

  8. NASA-Langley Research Center's Aircraft Condition Analysis and Management System Implementation

    Science.gov (United States)

    Frye, Mark W.; Bailey, Roger M.; Jessup, Artie D.

    2004-01-01

    This document describes the hardware implementation design and architecture of Aeronautical Radio Incorporated (ARINC)'s Aircraft Condition Analysis and Management System (ACAMS), which was developed at NASA-Langley Research Center (LaRC) for use in its Airborne Research Integrated Experiments System (ARIES) Laboratory. This activity is part of NASA's Aviation Safety Program (AvSP), the Single Aircraft Accident Prevention (SAAP) project to develop safety-enabling technologies for aircraft and airborne systems. The fundamental intent of these technologies is to allow timely intervention or remediation to improve unsafe conditions before they become life threatening.

  9. Bringing the Future Within Reach: Celebrating 75 Years of the NASA John H. Glenn Research Center

    Science.gov (United States)

    Arrighi, Robert S.

    2016-01-01

    The National Aeronautics and Space Administration (NASA) Glenn Research Center in Cleveland, Ohio, has been making the future for 75 years. The center's work with aircraft engines, high-energy fuels, communications technology, electric propulsion, energy conversion and storage, and materials and structures has been, and continues to be, crucial to both the Agency and the region. Glenn has partnered with industry, universities, and other agencies to continually advance technologies that are propelling the nation's aerospace community into the future. Nonetheless these continued accomplishments would not be possible without the legacy of our first three decades of research, which led to over one hundred R&D 100 Awards, three Robert J. Collier Trophies, and an Emmy. Glenn, which is located in Cleveland, Ohio, is 1 of 10 NASA field centers, and 1 of only 3 that stem from an earlier research organization-the National Advisory Committee for Aeronautics (NACA). Glenn began operation in 1942 as the NACA Aircraft Engine Research Laboratory (AERL). In 1947 the NACA renamed the lab the Flight Propulsion Laboratory to reflect the expansion of the research. In September 1948, following the death of the NACA's Director of Aeronautics, George Lewis, the NACA rededicated the lab as the Lewis Flight Propulsion Laboratory. On 1 October 1958, the lab was incorporated into the new NASA space agency and was renamed the NASA Lewis Research Center. Following John Glenn's return to space on the space shuttle, on 1 March 1999 the center name was changed once again, becoming the NASA John H. Glenn Research Center.

  10. Protocol, Engineering Research Center, University of California, Santa Barbara

    Science.gov (United States)

    2005-12-01

    Raymond Klefstad * Juan Colmenares , Graduate Student Researcher • Shruti Gorappa, Graduate Student Researcher * Trevor Harmon, Graduate Student Researcher...Technology and Applications Symposium, Washington ,D.C., May - June 2000. K. Raman, Y. Zhang, M. Panahi, J. A. Colmenares and R. Klefstad, "RTZen...Systems, September 2005, Vienna, Austria. K. Raman, Y. Zhang, M. Panahi, J. A. Colmenares and R. Klefstad, "Patterns and tools for achieving

  11. Research on Technology and Physics Education

    Science.gov (United States)

    Bonham, Scott

    2010-10-01

    From Facebook to smart phones, technology is an integral part of our student's lives. For better or for worse, technology has become nearly inescapable in the classroom, enhancing instruction, distracting students, or simply complicating life. As good teachers we want to harness the power we have available to impact our students, but it is getting harder as the pace of technological change accelerates. How can we make good choices in which technologies to invest time and resources in to use effectively? Do some technologies make more of a difference in student learning? In this talk we will look at research studies looking at technology use in the physics classroom---both my work and that of others---and their impact on student learning. Examples will include computers in the laboratory, web-based homework, and different forms of electronic communication. From these examples, I will draw some general principles for effective educational technology and physics education. Technology is simply a tool; the key is how we use those tools to help our students develop their abilities and understanding.

  12. FY06 Engineering Research and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C; Alves, S W; Anderson, A T; Bennett, C V; Brown, C G; Brown, W D; Chinn, D; Clague, D; Clark, G; Cook, E G; Davidson, J C; Deri, R J; Dougherty, G; Fasenfest, B J; Florando, J N; Fulkerson, E S; Haugen, P; Heebner, J E; Hickling, T; Huber, R; Hunter, S L; Javedani, J; Kallman, J S; Kegelmeyer, L M; Koning, J; Kosovic, B; Kroll, J J; LeBlanc, M; Lin, J; Mariella, R P; Miles, R; Nederbragt, W W; Ness, K D; Nikolic, R J; Paglieroni, D; Pannu, S; Pierce, E; Pocha, M D; Poland, D N; Puso, M A; Quarry, M J; Rhee, M; Romero, C E; Rose, K A; Sain, J D; Sharpe, R M; Spadaccini, C M; Stolken, J S; Van Buuren, A; Wemhoff, A; White, D; Yao, Y

    2007-01-22

    This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2006. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. Engineering's investment in technologies is carried out primarily through two internal programs: the Laboratory Directed Research and Development (LDRD) program and the technology base, or ''Tech Base'', program. LDRD is the vehicle for creating technologies and competencies that are cutting-edge, or require discovery-class research to be fully understood. Tech Base is used to prepare those technologies to be more broadly applicable to a variety of Laboratory needs. The term commonly used for Tech Base projects is ''reduction to practice''. Thus, LDRD reports have a strong research emphasis, while Tech Base reports document discipline-oriented, core competency activities. This report combines the LDRD and Tech Base summaries into one volume, organized into six thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Precision Engineering; Engineering Systems for Knowledge and Inference; and Energy Manipulation.

  13. NASA Space Engineering Research Center for utilization of local planetary resources

    Science.gov (United States)

    In 1987, responding to widespread concern about America's competitiveness and future in the development of space technology and the academic preparation of our next generation of space professionals, NASA initiated a program to establish Space Engineering Research Centers (SERC's) at universities with strong doctoral programs in engineering. The goal was to create a national infrastructure for space exploration and development, and sites for the Centers would be selected on the basis of originality of proposed research, the potential for near-term utilization of technologies developed, and the impact these technologies could have on the U.S. space program. The Centers would also be charged with a major academic mission: the recruitment of topnotch students and their training as space professionals. This document describes the goals, accomplishments, and benefits of the research activities of the University of Arizona/NASA SERC. This SERC has become recognized as the premier center in the area known as In-Situ Resource Utilization or Indigenous Space Materials Utilization.

  14. Meharry-Johns Hopkins Center for Prostate Cancer Research

    Science.gov (United States)

    2015-11-01

    formerly at the Institute for Health, Social, and Community Research (IHSCR) Center for Survey Research ( CSR ) at Shaw University in Raleigh, NC...survey will be conducted at CSR which is now located at Johns Hopkins Bloomberg School of Public Health (JHBSPH) located in Raleigh, NC. The Sons...at Meharry. 4 Dr. LaVeist secured definitive IRB approval at JHU. 5 Working budgets were developed and sub-contract with JHU was signed by both

  15. Scientific and technical information output of the Langley Research Center

    Science.gov (United States)

    1984-01-01

    Scientific and technical information that the Langley Research Center produced during the calendar year 1983 is compiled. Included are citations for Formal Reports, Quick-Release Technical Memorandums, Contractor Reports, Journal Articles and other Publications, Meeting Presentations, Technical Talks, Computer Programs, Tech Briefs, and Patents.

  16. Integrating professional education, research and extensionin irrigated agriculture technology centers Integração ensino profissional-pesquisa-extensão rural através de centros de tecnologia em agricultura irrigada

    Directory of Open Access Journals (Sweden)

    Jadir A Rosa

    2011-12-01

    Full Text Available With the objective to stimulate the use of irrigation and the electric energy fee reduction during night time program granted by the 2004 Federal law, the Government of the state of Paraná, Brazil launched the Night Irrigation Program - NPI. Beyond this discount, the farmer that adheres to NPI will get additional benefits, as completion of the electric grid without cost, subsidized financing of equipment, technical assistance, support with environmental farm compliance, and the possibility of replacing the entire pump energy matrix. As part of the NPI strategy of action, installation of learning centers for irrigation technology was planned in agricultural schools, thus contributing both to improve technical professional training in agriculture, and for the dissemination of knowledge in irrigated agriculture, in order to increase agricultural productivity.Com o objetivo de estimular o uso da irrigação e utilizando-se de descontos na tarifa de energia elétrica concedidos por lei federal, em 2004, o Governo do Paraná lançou o Programa de Irrigação Noturna - NPI. Além de descontos, o agricultor que aderir ao NPI contará com outros benefícios, como complementação da rede elétrica sem custo, financiamento subsidiado de equipamentos, assistência técnica oficial, facilitação quanto à adequação ambiental da propriedade, possibilidade de substituição da matriz energética do conjunto moto bomba. Como parte da estratégia de ação do NPI, previu-se a instalação de centros irradiadores da tecnologia da irrigação em vários colégios agrícolas, contribuindo, desta forma, tanto para a melhoria na formação do profissional técnico em agropecuária quanto para a disseminação dos conhecimentos em agricultura irrigada, visando ao aumento da produtividade agrícola.

  17. Clean Energy Manufacturing Analysis Center (CEMAC) 2015 Research Highlights

    Energy Technology Data Exchange (ETDEWEB)

    Woodhouse, Michael; Mone, Christopher; Chung, Donald; Elgqvist, Emma; Das, Sujit; Mann, Margaret; Gossett, Scott

    2016-03-01

    CEMAC has conducted four major studies on the manufacturing of clean energy technologies. Three of these focused on the end product: solar photovoltaic modules, wind turbines, and automotive lithium-ion batteries. The fourth area focused on a key material for manufacturing clean energy technologies, carbon fiber. This booklet summarizes key findings of CEMAC work to date, describes CEMAC's research methodology, and describes work to come.

  18. Center for Fuel Cell Research and Applications development phase. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The deployment and operation of clean power generation is becoming critical as the energy and transportation sectors seek ways to comply with clean air standards and the national deregulation of the utility industry. However, for strategic business decisions, considerable analysis is required over the next few years to evaluate the appropriate application and value added from this emerging technology. To this end the Houston Advanced Research Center (HARC) is proposing a three-year industry-driven project that centers on the creation of ``The Center for Fuel Cell Research and Applications.`` A collaborative laboratory housed at and managed by HARC, the Center will enable a core group of six diverse participating companies--industry participants--to investigate the economic and operational feasibility of proton-exchange-membrane (PEM) fuel cells in a variety of applications (the core project). This document describes the unique benefits of a collaborative approach to PEM applied research, among them a shared laboratory concept leading to cost savings and shared risks as well as access to outstanding research talent and lab facilities. It also describes the benefits provided by implementing the project at HARC, with particular emphasis on HARC`s history of managing successful long-term research projects as well as its experience in dealing with industry consortia projects. The Center is also unique in that it will not duplicate the traditional university role of basic research or that of the fuel cell industry in developing commercial products. Instead, the Center will focus on applications, testing, and demonstration of fuel cell technology.

  19. Planning nuclear energy centers under technological and demand uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Meier, P.M.; Palmedo, P.F.

    1976-01-01

    The question considered is whether new nuclear power plants should be located in nuclear energy centers, or ''power parks'' with co-located fabrication and reprocessing facilities. That issue has been addressed in a recent study by the Nuclear Regulatory Commission and remains under investigation at Brookhaven and elsewhere. So far, however, the advisability of this policy has been analyzed primarily within the framework of a single view of the future. Suggestions of the types of questions that should be asked regarding this policy if it is properly to be viewed as an example of decision making under uncertainty are made. It is concluded that ''A consideration of the various uncertainties involved in the question of dispersed vs. remote siting of energy facilities introduces a number of new elements into the analysis. On balance those considerations provide somewhat greater support for the clustered concept. The NEC approach seems to provide somewhat greater flexibility in accomodating possible future electricity generating technologies. Increased regulatory and construction efficiencies possible in an NEC reduces the impact of demand uncertainty as does the lower costs associated with construction acceleration or deceleration.'' It is also noted that, in the final analysis, ''it is the public's perception of the relative costs and benefits of a measure that determine the acceptability or unacceptability of a particular innovation,'' not the engineer's cost/benefit analysis. It is further noted that if the analysis can identify limits on analytical methods and models, it will not make the job of energy decision-making any easier, but it may make the process more responsive to its impact on society. (MCW)

  20. Idaho Nuclear Technology and Engineering Center Newly Generated Liquid Waste Demonstration Project Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.

    2000-02-01

    A research, development, and demonstration project for the grouting of newly generated liquid waste (NGLW) at the Idaho Nuclear Technology and Engineering Center is considered feasible. NGLW is expected from process equipment waste, decontamination waste, analytical laboratory waste, fuel storage basin waste water, and high-level liquid waste evaporator condensate. The potential grouted waste would be classed as mixed low-level waste, stabilized and immobilized to meet RCRA LDR disposal in a grouting process in the CPP-604 facility, and then transported to the state.

  1. Health effects of coal technologies: research needs

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    In this 1977 Environmental Message, President Carter directed the establishment of a joint program to identify the health and environmental problems associated with advanced energy technologies and to review the adequacy of present research programs. In response to the President's directive, representatives of three agencies formed the Federal Interagency Committee on the Health and Environmental Effects of Energy Technologies. This report was prepared by the Health Effects Working Group on Coal Technologies for the Committee. In this report, the major health-related problems associated with conventional coal mining, storage, transportation, and combustion, and with chemical coal cleaning, in situ gasification, fluidized bed combustion, magnetohydrodynamic combustion, cocombustion of coal-oil mixtures, and cocombustion of coal with municipal solid waste are identified. The report also contains recommended research required to address the identified problems.

  2. Landmine detection technology research in the Netherlands

    NARCIS (Netherlands)

    Schleijpen, H.M.A.

    2003-01-01

    This paper gives an overview of the activities on research and development in the technology area for landmine detection in the Netherlands. The main players, their projects and the long term and short term project goals are presented. The projects cover the range from military applications to human

  3. Landmine Detection Technology Research Programme at TNO

    NARCIS (Netherlands)

    Schleijpen, H.M.A.

    2003-01-01

    This presentation gives an overview of most of the activities on research and development in the technology area for landmine detection at TNO in the Netherlands. The projects cover the range from military applications to humanitarian demining. In the “conventional” detection systems area the activi

  4. Educational Technology Research in a VUCA World

    Science.gov (United States)

    Reeves, Thomas C.; Reeves, Patricia M.

    2015-01-01

    The status of educational technology research in a VUCA world is examined. The acronym, VUCA, stands for "Volatility" (rapidly changing contexts and conditions), "Uncertainty" (information missing that is critical to problem solving), "Complexity" (multiple factors difficult to categorize or control), and…

  5. Present challenges of research and technology politics

    Science.gov (United States)

    Bulow, A. V.

    1982-01-01

    Research and technology in Germany are discussed. The rapid transfer of scientific knowledge and techniques from the laboratory to the manufacturing and industrial communities is identified as a priority. It is recommended that the government give maximum support to the aviation and space flight industries.

  6. Information Technology Investments in Research Libraries.

    Science.gov (United States)

    Rosenblatt, Susan

    1999-01-01

    Examines investments that will ensure that library information technology (IT) meets future academic needs. Looks back on the introduction of IT to research libraries. Assesses outcomes of IT investments in terms of cost and service benefits, and then focuses on developing new service models. (AEF)

  7. Research and Technology: Fiscal year 1982 report

    Science.gov (United States)

    1982-01-01

    Accomplishments and research objectives are described in the following areas: (1) space sciences; (2) space and terrestrial applications; (3) flight projects and mission definition studies; (4) space tracking and data systems; and (5) space technology. Data analysis efforts, instrument development, and measurement projects are among the aspects considered.

  8. Food irradiation: research and technology, preface

    Science.gov (United States)

    Many interesting and exciting developments have occurred in the field of food irradiation since the publication of the first edition of Food Irradiation: Research and Technology in 2006. The 2nd edition of the book reviews our latest knowledge on food irradiation, highlights the current developments...

  9. In Situ Resource Utilization Technology Research and Facilities Supporting the NASA's Human Systems Research and Technology Life Support Program

    Science.gov (United States)

    Schlagheck, Ronald A.; Sibille, Laurent; Sacksteder, Kurt; Owens, Chuck

    2005-01-01

    The NASA Microgravity Science program has transitioned research required in support of NASA s Vision for Space Exploration. Research disciplines including the Materials Science, Fluid Physics and Combustion Science are now being applied toward projects with application in the planetary utilization and transformation of space resources. The scientific and engineering competencies and infrastructure in these traditional fields developed at multiple NASA Centers and by external research partners provide essential capabilities to support the agency s new exploration thrusts including In-Situ Resource Utilization (ISRU). Among the technologies essential to human space exploration, the production of life support consumables, especially oxygen and; radiation shielding; and the harvesting of potentially available water are realistically achieved for long-duration crewed missions only through the use of ISRU. Ongoing research in the physical sciences have produced a body of knowledge relevant to the extraction of oxygen from lunar and planetary regolith and associated reduction of metals and silicon for use meeting manufacturing and repair requirements. Activities being conducted and facilities used in support of various ISRU projects at the Glenn Research Center and Marshall Space Flight Center will be described. The presentation will inform the community of these new research capabilities, opportunities, and challenges to utilize their materials, fluids and combustion science expertise and capabilities to support the vision for space exploration.

  10. In Situ Resource Utilization Technology Research and Facilities Supporting the NASA's Human Systems Research and Technology Life Support Program

    Science.gov (United States)

    Schlagheck, Ronald A.; Sibille, Laurent; Sacksteder, Kurt; Owens, Chuck

    2005-01-01

    The NASA Microgravity Science program has transitioned research required in support of NASA s Vision for Space Exploration. Research disciplines including the Materials Science, Fluid Physics and Combustion Science are now being applied toward projects with application in the planetary utilization and transformation of space resources. The scientific and engineering competencies and infrastructure in these traditional fields developed at multiple NASA Centers and by external research partners provide essential capabilities to support the agency s new exploration thrusts including In-Situ Resource Utilization (ISRU). Among the technologies essential to human space exploration, the production of life support consumables, especially oxygen and; radiation shielding; and the harvesting of potentially available water are realistically achieved for long-duration crewed missions only through the use of ISRU. Ongoing research in the physical sciences have produced a body of knowledge relevant to the extraction of oxygen from lunar and planetary regolith and associated reduction of metals and silicon for use meeting manufacturing and repair requirements. Activities being conducted and facilities used in support of various ISRU projects at the Glenn Research Center and Marshall Space Flight Center will be described. The presentation will inform the community of these new research capabilities, opportunities, and challenges to utilize their materials, fluids and combustion science expertise and capabilities to support the vision for space exploration.

  11. Double Star Research: A Student-Centered Community of Practice

    Science.gov (United States)

    Johnson, Jolyon

    2016-06-01

    Project and team-based pedagogies are increasingly augmenting lecture-style science classrooms. Occasionally, university professors will invite students to tangentially partcipate in their research. Since 2006, Dr. Russ Genet has led an astronomy research seminar for community college and high school students that allows participants to work closely with a melange of professional and advanced amatuer researchers. The vast majority of topics have centered on measuring the position angles and searations of double stars which can be readily published in the Journal of Double Star Observations. In the intervening years, a collaborative community of practice (Wenger, 1998) formed with the students as lead researchers on their projects with the guidance of experienced astronomers and educators. The students who join the research seminar are often well prepared for further STEM education in college and career. Today, the research seminar involves multile schools in multiple states with a volunteer educator acting as an assistant instructor at each location. These assistant instructors interface with remote observatories, ensure progress is made, and recruit students. The key deliverables from each student team include a published research paper and a public presentation online or in-person. Citing a published paper on scholarship and college applications gives students' educational carreers a boost. Recently the Journal of Double Star Observations published its first special issue of exlusively student-centered research.

  12. Landmine research: technology solutions looking for problems

    Science.gov (United States)

    Trevelyan, James P.

    2004-09-01

    The global landmine problem came to the attention of researchers in the mid 1990's and by 1997 several advanced and expensive sensor research programs had started. Yet, by the end of 2003, there is little sign of a major advance in the technology available to humanitarian demining programs. Given the motivation and dedication of researchers, public goodwill to support such programs, and substantial research resources devoted to the problem, it is worth asking why these programs do not seem to have had an impact on demining costs or casualty rates. Perhaps there are factors that have been overlooked. This paper reviews several research programs to gain a deeper understanding of the problem. A possible explanation is that researchers have accepted mistaken ideas on the nature of the landmine problems that need to be solved. The paper provides several examples where the realities of minefield conditions are quite different to what researchers have been led to believe. Another explanation may lie in the political and economic realities that drive the worldwide effort to eliminate landmines. Most of the resources devoted to landmine clearance programs come from humanitarian aid budgets: landmine affected countries often contribute only a small proportion because they have different priorities based on realistic risk-based assessment of needs and political views of local people. Some aid projects have been driven by the need to find a market for demining technologies rather than by user needs. Finally, there is a common misperception that costs in less developed countries are intrinsically low, reflecting low rates paid for almost all classes of skilled labour. When actual productivity is taken into account, real costs can be higher than industrialized countries. The costs of implementing technological solutions (even using simple technologies) are often significantly under-estimated. Some political decisions may have discouraged thorough investigation of cost

  13. SWOT analysis in Sina Trauma and Surgery Research Center.

    Science.gov (United States)

    Salamati, Payman; ashraf Eghbali, Ali; Zarghampour, Manijeh

    2014-01-01

    The present study was conducted with the aim of identifying and evaluating the internal and external factors, affecting the Sina Trauma and Surgery Research Center, affiliated to Tehran University of Medical Sciences and propose some of related strategies to senior managers. We used a combined quantitative and qualitative methodology. Our study population consisted of personnel (18 individuals) at Sina Trauma and Surgery Research Center. Data-collection tools were the group discussions and the questionnaires. Data were analyzed with descriptive statistics and SWOT (Strength, Weakness, Opportunities and Threats) analysis. 18 individuals participated in sessions, consisting of 8 women (44.4%) and 10 men (55.6%). The final scores were 2.45 for internal factors (strength-weakness) and 2.17 for external factors (opportunities-threats). In this study, we proposed 36 strategies (10 weakness-threat strategies, 10 weakness-opportunity strategies, 7 strength-threat strategies, and 9 strength-opportunity strategies). The current status of Sina Trauma and Surgery Research Center is threatened weak. We recommend the center to implement the proposed strategies.

  14. SWOT analysis in Sina Trauma and Surgery Research Center.

    Directory of Open Access Journals (Sweden)

    Payman Salamati

    2014-02-01

    Full Text Available The present study was conducted with the aim of identifying and evaluating the internal and external factors, affecting the Sina Trauma and Surgery Research Center, affiliated to Tehran University of Medical Sciences and propose some of related strategies to senior managers. We used a combined quantitative and qualitative methodology. Our study population consisted of personnel (18 individuals at Sina Trauma and Surgery Research Center. Data-collection tools were the group discussions and the questionnaires. Data were analyzed with descriptive statistics and SWOT (Strength, Weakness, Opportunities and Threats analysis. 18 individuals participated in sessions, consisting of 8 women (44.4% and 10 men (55.6%. The final scores were 2.45 for internal factors (strength-weakness and 2.17 for external factors (opportunities-threats. In this study, we proposed 36 strategies (10 weakness-threat strategies, 10 weakness-opportunity strategies, 7 strength-threat strategies, and 9 strength-opportunity strategies. The current status of Sina Trauma and Surgery Research Center is threatened weak. We recommend the center to implement the proposed strategies.

  15. Innovative Educational Aerospace Research at the Northeast High School Space Research Center

    Science.gov (United States)

    Luyet, Audra; Matarazzo, Anthony; Folta, David

    1997-01-01

    Northeast High Magnet School of Philadelphia, Pennsylvania is a proud sponsor of the Space Research Center (SPARC). SPARC, a model program of the Medical, Engineering, and Aerospace Magnet school, provides talented students the capability to successfully exercise full simulations of NASA manned missions. These simulations included low-Earth Shuttle missions and Apollo lunar missions in the past, and will focus on a planetary mission to Mars this year. At the end of each scholastic year, a simulated mission, lasting between one and eight days, is performed involving 75 students as specialists in seven teams The groups are comprised of Flight Management, Spacecraft Communications (SatCom), Computer Networking, Spacecraft Design and Engineering, Electronics, Rocketry, Robotics, and Medical teams in either the mission operations center or onboard the spacecraft. Software development activities are also required in support of these simulations The objective of this paper is to present the accomplishments, technology innovations, interactions, and an overview of SPARC with an emphasis on how the program's educational activities parallel NASA mission support and how this education is preparing student for the space frontier.

  16. Innovative Educational Aerospace Research at the Northeast High School Space Research Center

    Science.gov (United States)

    Luyet, Audra; Matarazzo, Anthony; Folta, David

    1997-01-01

    Northeast High Magnet School of Philadelphia, Pennsylvania is a proud sponsor of the Space Research Center (SPARC). SPARC, a model program of the Medical, Engineering, and Aerospace Magnet school, provides talented students the capability to successfully exercise full simulations of NASA manned missions. These simulations included low-Earth Shuttle missions and Apollo lunar missions in the past, and will focus on a planetary mission to Mars this year. At the end of each scholastic year, a simulated mission, lasting between one and eight days, is performed involving 75 students as specialists in seven teams The groups are comprised of Flight Management, Spacecraft Communications (SatCom), Computer Networking, Spacecraft Design and Engineering, Electronics, Rocketry, Robotics, and Medical teams in either the mission operations center or onboard the spacecraft. Software development activities are also required in support of these simulations The objective of this paper is to present the accomplishments, technology innovations, interactions, and an overview of SPARC with an emphasis on how the program's educational activities parallel NASA mission support and how this education is preparing student for the space frontier.

  17. Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies

    Energy Technology Data Exchange (ETDEWEB)

    David Holloway

    2005-09-30

    Beginning the fall semester of 1999, The University of Maryland, Departments of Mechanical and Electrical Engineering and the Institute for Systems Research served as a U.S. Department of Energy (USDOE) Graduate Automotive Technology Education (GATE) Center for Hybrid Electric Drivetrains and Control Strategies. A key goal was to produce a graduate level education program that educated and prepared students to address the technical challenges of designing and developing hybrid electric vehicles, as they progressed into the workforce. A second goal was to produce research that fostered the advancement of hybrid electric vehicles, their controls, and other related automotive technologies. Participation ended at the University of Maryland after the 2004 fall semester. Four graduate courses were developed and taught during the course of this time, two of which evolved into annually-taught undergraduate courses, namely Vehicle Dynamics and Control Systems Laboratory. Five faculty members from Mechanical Engineering, Electrical Engineering, and the Institute for Systems Research participated. Four Ph.D. degrees (two directly supported and two indirectly supported) and seven Master's degrees in Mechanical Engineering resulted from the research conducted. Research topics included thermoelectric waste heat recovery, fuel cell modeling, pre- and post-transmission hybrid powertrain control and integration, hybrid transmission design, H{sub 2}-doped combustion, and vehicle dynamics. Many of the participating students accepted positions in the automotive industry or government laboratories involved in automotive technology work after graduation. This report discusses the participating faculty, the courses developed and taught, research conducted, the students directly and indirectly supported, and the publication list. Based on this collection of information, the University of Maryland firmly believes that the key goal of the program was met and that the majority of the

  18. Application of biophysical technologies in dental research

    Science.gov (United States)

    Higham, Susan M.; Pender, Neil; de Josselin de Jong, Elbert; Smith, Philip W.

    2009-05-01

    There is a wealth of evidence to indicate that if dental caries can be recognized at an early stage, it is possible to halt its progression or even reverse it. This has led to an increased interest in the development of diagnostic techniques capable of visualizing caries at an early stage in addition to providing clinicians with an aid to diagnosis. Several techniques are available for research and clinical applications for detecting early demineralization. This manuscript has reviewed some of the techniques currently available to determine their advantages, whether they have any limitations and their applicability to dental research and clinical dentistry. Not one method is the perfect choice in all situations, but what is clear is that the development and application of biophysical technologies have allowed major advances to be made in dental research as well as in clinical dentistry. With continued developments these technologies will play an important role in the future management of dental disease.

  19. University Center of Excellence for Photovoltaics Research and Education: Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Rohatgi, A.; Crotty, G.; Cai, L.; Sana, P.; Doolittle, A.; Ropp, M.; Krygowski, T.; Narasimha, S. [Georgia Inst. of Tech., Atlanta, GA (United States). School of Electrical and Computer Engineering

    1995-09-01

    This is a second annual report since the University Center of Excellence for Photovoltaics Research and Education was established at Georgia Tech. The major focus of the center is crystalline silicon, and the mission of the Center is to improve the fundamental understanding of the science and technology of advanced photovoltaic devices and materials, to fabricate high-efficiency cells, and develop low-cost processes, to provide training and enrich the equational experience of students in this field, and to increase US competitiveness by providing guidelines to industry and DOE to achieve cost-effective and high-efficiency photovoltaic devices. This report outlines the work of the Center from July 1993--June 1994.

  20. Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

    Science.gov (United States)

    Quick, Jason

    2009-01-01

    The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the

  1. Assessing Community Informatics: A Review of Methodological Approaches for Evaluating Community Networks and Community Technology Centers.

    Science.gov (United States)

    O'Neil, Dara

    2002-01-01

    Analyzes the emerging community informatics evaluation literature to develop an understanding of the indicators used to gauge project impacts in community networks and community technology centers. The study finds that community networks and community technology center assessments fall into five key areas: strong democracy; social capital;…

  2. Capsule Pipeline Research Center. 3-year Progress report, September 1, 1993--August 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Capsule Pipeline Research Center is devoted to performing research in capsule pipelines so that this emerging technology can be developed for early use to transport solids including coal, grain, other agricultural products, solid wastes, etc. Important research findings and accomplishments during the first-three years include: success in making durable binderless coal logs by compaction, success in underwater extrusion of binderless coal logs, success in compacting and extruding coal logs with less than 3% hydrophobic binder at room temperature, improvement in the injection system and the pump-bypass scheme, advancement in the state-of-the-art of predicting the energy loss (pressure drop) along both stationary and moving capsules, demonstrated the effectiveness of using polymer for drag reduction in CLP, demonstrated the influence of zeta potential on coal log fabrication, improved understanding of the water absorption properties of coal logs, better understanding of the mechanism of coal log abrasion (wear), completed a detailed economic evaluation of the CLP technology and compared coal transportation cost by CLP to that by rail, truck and slurry pipelines, and completion of several areas of legal research. The Center also conducted important technology transfer activities including workshops, work sessions, company seminars, involvement of companies in CLP research, issuance of newsletters, completion of a video tape on CLP, and presentation of research findings at numerous national and international meetings.

  3. Patient-centered outcomes research to improve asthma outcomes.

    Science.gov (United States)

    Anise, Ayodola; Hasnain-Wynia, Romana

    2016-12-01

    The Patient-Centered Outcomes Research Institute is funding 8 comparative effectiveness research projects to improve patient-centered outcomes for African American and Hispanic/Latino patients with uncontrolled asthma. These projects aim to compare multilevel interventions with known efficacy at the community, home, and health system levels to enhance patient and clinician uptake of the National Heart, Lung, and Blood Institute's National Asthma Education Prevention Program guidelines and improve outcomes. The National Asthma Education Prevention Program guidelines provide clinicians with a range of acceptable approaches for the diagnosis and management of asthma and define general practices that meet the needs of most patients. Yet disparities in asthma care and outcomes remain pervasive for African Americans and Hispanics/Latinos. The National Heart, Lung, and Blood Institute AsthmaNet consortium has identified several top research priorities for pediatric and adult populations, including a recommendation to examine tailored approaches based on race/ethnicity. In addition, the guidelines emphasize the need for studies that focus on multicomponent interventions recognizing that single interventions are generally ineffective. This article will describe the Patient-Centered Outcomes Research Institute-funded asthma projects and how they are individually and collectively addressing evidence gaps in asthma care by focusing on multicomponent and tailored approaches for improving outcomes and reducing disparities for African American and Hispanic/Latino patients. Copyright © 2016. Published by Elsevier Inc.

  4. Community engagement and the resource centers for minority aging research.

    Science.gov (United States)

    Sood, Johanna R; Stahl, Sidney M

    2011-06-01

    The National Institute on Aging created the Resource Centers for Minority Aging Research (RCMARs) to address infrastructure development intended to reduce health disparities among older adults. The overall goals of the RCMARs are to (a) increase the size of the cadre of researchers conducting research on issues related to minority aging; (b) increase the diversity of researchers conducting research on minority aging; (c) create and test reliable measures for use in older diverse populations; and (d) conduct research on recruitment and retention of community-dwelling older adults for research addressing behavioral, social, and medical issues. Along with this latter goal, the RCMARs developed and maintain academic-community partnerships. To accomplish the recruitment and retention goal, the RCMARs established Community Liaison Working Groups using a collaborative approach to scientific inquiry; this special issue will identify research priorities for moving the science of recruitment and retention forward. In addition, sustainable and efficient methods for fostering long-term partnerships will be identified between community and academia. Evidence-based approaches to the recruitment and retention of diverse elders are explored. We expect this supplement to serve as a catalyst for researchers interested in engaging diverse community-dwelling elders in health-related research. In addition, this supplement should serve as a source of the most contemporary evidence-based approaches to the recruitment and retention of diverse older populations for participation in social, behavioral, and clinical research.

  5. Using the NIATx Model to Implement User-Centered Design of Technology for Older Adults.

    Science.gov (United States)

    Gustafson, David H; Maus, Adam; Judkins, Julianne; Dinauer, Susan; Isham, Andrew; Johnson, Roberta; Landucci, Gina; Atwood, Amy K

    2016-01-14

    What models can effectively guide the creation of eHealth and mHealth technologies? This paper describes the use of the NIATx model as a framework for the user-centered design of a new technology for older adults. The NIATx model is a simple framework of process improvement based on the following principles derived from an analysis of decades of research from various industries about why some projects fail and others succeed: (1) Understand and involve the customer; (2) fix key problems; (3) pick an influential change leader; (4) get ideas from outside the field; (5) use rapid-cycle testing. This paper describes the use of these principles in technology development, the strengths and challenges of using this approach in this context, and lessons learned from the process. Overall, the NIATx model enabled us to produce a user-focused technology that the anecdotal evidence available so far suggests is engaging and useful to older adults. The first and fourth principles were especially important in developing the technology; the fourth proved the most challenging to use.

  6. Setting up a health care quality management system in a multidisciplinary clinical research center

    Directory of Open Access Journals (Sweden)

    L. V. Laktionova

    2013-01-01

    Full Text Available The paper discusses the issues of setting up a quality management system in a multidisciplinary specialized clinical research center. It describes the experience with information technologies used in a prophylactic facility to set up effective out- and inpatient health care control. Measures to optimize work under present-day conditions to upgrade the quality of health care are given using the federal health facility as an example.

  7. Shock Tube and Ballistic Range Facilities at NASA Ames Research Center

    Science.gov (United States)

    Grinstead, Jay H.; Wilder, Michael C.; Reda, Daniel C.; Cornelison, Charles J.; Cruden, Brett A.; Bogdanoff, David W.

    2010-01-01

    The Electric Arc Shock Tube (EAST) facility and the Hypervelocity Free Flight Aerodynamic Facility (HFFAF) at NASA Ames Research Center are described. These facilities have been in operation since the 1960s and have supported many NASA missions and technology development initiatives. The facilities have world-unique capabilities that enable experimental studies of real-gas aerothermal, gas dynamic, and kinetic phenomena of atmospheric entry.

  8. The National Space Science and Technology Center's Education and Public Outreach Program

    Science.gov (United States)

    Cox, G. N.; Denson, R. L.

    2004-12-01

    The objective of the National Space Science and Technology Center's (NSSTC) Education and Public Outreach program (EPO) is to support K-20 education by coalescing academic, government, and business constituents awareness, implementing best business/education practices, and providing stewardship over funds and programs that promote a symbiotic relationship among these entities, specifically in the area of K-20 Science, Technology, Engineering, and Mathematics (STEM) education. NSSTC EPO Program's long-term objective is to showcase its effective community-based integrated stakeholder model in support of STEM education and to expand its influence across the Southeast region for scaling ultimately across the United States. The Education and Public Outreach program (EPO) is coordinated by a supporting arm of the NSSTC Administrative Council called the EPO Council (EPOC). The EPOC is funded through federal, state, and private grants, donations, and in-kind contributions. It is comprised of representatives of NSSTC Research Centers, both educators and scientists from the Alabama Space Science and Technology Alliance (SSTA) member institutions, the Alabama Space Grant Consortium and the NASA Marshall Space Flight Center's (MSFC) Education Office. Through its affiliation with MSFC and the SSTA - a consortium of Alabama's research universities that comprise the NSSTC, EPO fosters the education and development of the next generation of Alabama scientists and engineers by coordinating activities at the K-20 level in cooperation with the Alabama Department of Education, the Alabama Commission on Higher Education, and Alabama's businesses and industries. The EPO program's primary objective is to be Alabama's premiere organization in uniting academia, government, and private industry by way of providing its support to the State and Federal Departments of Education involved in systemic STEM education reform, workforce development, and innovative uses of technology. The NSSTC EPO

  9. The NIH-NIAID Filariasis Research Reagent Resource Center.

    Directory of Open Access Journals (Sweden)

    Michelle L Michalski

    2011-11-01

    Full Text Available Filarial worms cause a variety of tropical diseases in humans; however, they are difficult to study because they have complex life cycles that require arthropod intermediate hosts and mammalian definitive hosts. Research efforts in industrialized countries are further complicated by the fact that some filarial nematodes that cause disease in humans are restricted in host specificity to humans alone. This potentially makes the commitment to research difficult, expensive, and restrictive. Over 40 years ago, the United States National Institutes of Health-National Institute of Allergy and Infectious Diseases (NIH-NIAID established a resource from which investigators could obtain various filarial parasite species and life cycle stages without having to expend the effort and funds necessary to maintain the entire life cycles in their own laboratories. This centralized resource (The Filariasis Research Reagent Resource Center, or FR3 translated into cost savings to both NIH-NIAID and to principal investigators by freeing up personnel costs on grants and allowing investigators to divert more funds to targeted research goals. Many investigators, especially those new to the field of tropical medicine, are unaware of the scope of materials and support provided by the FR3. This review is intended to provide a short history of the contract, brief descriptions of the fiilarial species and molecular resources provided, and an estimate of the impact the resource has had on the research community, and describes some new additions and potential benefits the resource center might have for the ever-changing research interests of investigators.

  10. Nanofluid technology : current status and future research.

    Energy Technology Data Exchange (ETDEWEB)

    Choi, S. U.-S.

    1998-10-20

    Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as microchannel heat exchangers, and micropumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the microchannels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21st century. This paper gives a brief history of the Advanced Fluids Program at Argonne National Laboratory (ANL), discusses the concept of nanofluids, and provides an overview of the R and D program at ANL on the production, property characterization, and performance of nanofluids. It also describes examples of potential applications and benefits of nanofluids. Finally, future research on the fundamentals and applications of nanofluids is addressed.

  11. White LED visible light communication technology research

    Science.gov (United States)

    Yang, Chao

    2017-03-01

    Visible light communication is a new type of wireless optical communication technology. White LED to the success of development, the LED lighting technology is facing a new revolution. Because the LED has high sensitivity, modulation, the advantages of good performance, large transmission power, can make it in light transmission light signal at the same time. Use white LED light-emitting characteristics, on the modulation signals to the visible light transmission, can constitute a LED visible light communication system. We built a small visible optical communication system. The system composition and structure has certain value in the field of practical application, and we also research the key technology of transmitters and receivers, the key problem has been resolved. By studying on the optical and LED the characteristics of a high speed modulation driving circuit and a high sensitive receiving circuit was designed. And information transmission through the single chip microcomputer test, a preliminary verification has realized the data transmission function.

  12. Chemical Inventory Management at NASA Lewis Research Center

    Science.gov (United States)

    Kraft, Shirley S.; Homan, Joseph R.; Bajorek, Michael J.; Dominguez, Manuel B.; Smith, Vanessa L.

    1997-01-01

    The Chemical Management System (CMS) is a client/server application developed with Power Builder and Sybase for the Lewis Research Center (LeRC). Power Builder is a client-server application development tool, Sybase is a Relational Database Management System. The entire LeRC community can access the CMS from any desktop environment. The multiple functions and benefits of the CMS are addressed.

  13. Energy Technology Division research summary - 1999.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-31

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization, or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book.

  14. Evaluating the Readiness of Iranian Research Centers in Knowledge Management

    Directory of Open Access Journals (Sweden)

    Nasrin D. Mamaghani

    2011-01-01

    Full Text Available Problem statement: Knowledge and its management are considered as a foundation for creating competitive advantages in organizations. Most of large companies have allocated plenty of resources to Knowledge Management (KM because they believe Knowledge and its management is a foundation for creating competitive advantages in organizations. However, implementing knowledge management projects in an organization requires essential organizational changes. The main purpose of this study was to explore KM success factors of Iranian research center to make a basis for evaluating the readiness of KM in them. Approach: In this study, success factors of knowledge management were extracted from literature review on papers represented between 1997 and 2009. Then the factors were categorized and effective and critical success factors in each group were determined. The results were validated and analyzed by a questionnaire through binomial test and approved by an expert panel. Results: The study revealed that KM success factors of Iranian research centers are: Knowledge strategy, management support, motivational encouragements to share knowledge, suitable technical infrastructure. It is obvious that continuous attention of management to these factors is vital for the success of knowledge management in organizations. Conclusions: Based on results, to improve current situation of KM in Iranian research center, KM and its benefits should be represented to managers to attract their support in organization. Then KM should be employed in strategic program of organization. Besides, implementing the projects of KM should be accompanied with reward and motivational systems to facilitate knowledge sharing and create proper organizational culture.

  15. Soviet precision timekeeping research and technology

    Energy Technology Data Exchange (ETDEWEB)

    Vessot, R.F.C.; Allan, D.W.; Crampton, S.J.B.; Cutler, L.S.; Kern, R.H.; McCoubrey, A.O.; White, J.D.

    1991-08-01

    This report is the result of a study of Soviet progress in precision timekeeping research and timekeeping capability during the last two decades. The study was conducted by a panel of seven US scientists who have expertise in timekeeping, frequency control, time dissemination, and the direct applications of these disciplines to scientific investigation. The following topics are addressed in this report: generation of time by atomic clocks at the present level of their technology, new and emerging technologies related to atomic clocks, time and frequency transfer technology, statistical processes involving metrological applications of time and frequency, applications of precise time and frequency to scientific investigations, supporting timekeeping technology, and a comparison of Soviet research efforts with those of the United States and the West. The number of Soviet professionals working in this field is roughly 10 times that in the United States. The Soviet Union has facilities for large-scale production of frequency standards and has concentrated its efforts on developing and producing rubidium gas cell devices (relatively compact, low-cost frequency standards of modest accuracy and stability) and atomic hydrogen masers (relatively large, high-cost standards of modest accuracy and high stability). 203 refs., 45 figs., 9 tabs.

  16. The socialisation of scientific and technological research

    Directory of Open Access Journals (Sweden)

    2009-09-01

    Full Text Available In the last decades, production of science and technology as well as science-society relationships started changing rapidly. Research is asked to be more effective, fast, accountable, trans-disciplinary, result-oriented, policy-driven and able to generate benefits for people and firms in the short and middle run. While a strong intensification of science-society relationships is occurring, an increasing number of actors and stakeholders are involved in research production. At the same time, pervasiveness of technology is rendering users an active part in technological development; economic and social interests on science and technology are growing on a global scale; new democratic and ethical issues emerge. Despite the European institutions’ efforts, all those trends and phenomena are occurring in an extremely fragmented way. In this scenario, a fairly balanced and consistent co-evolution between science and society can no longer be taken for granted. This is just the starting point of the following comment section that, through the Luciano d’Andrea, Sally Wyatt, Erik Aarden, Jos Lejten and Peter Sekloča’s writings, aims to analyse the different aspects and questions around the socialisation of science and technology’s matter.

  17. NASA Space Weather Center Services: Potential for Space Weather Research

    Science.gov (United States)

    Zheng, Yihua; Kuznetsova, Masha; Pulkkinen, Antti; Taktakishvili, A.; Mays, M. L.; Chulaki, A.; Lee, H.; Hesse, M.

    2012-01-01

    The NASA Space Weather Center's primary objective is to provide the latest space weather information and forecasting for NASA's robotic missions and its partners and to bring space weather knowledge to the public. At the same time, the tools and services it possesses can be invaluable for research purposes. Here we show how our archive and real-time modeling of space weather events can aid research in a variety of ways, with different classification criteria. We will list and discuss major CME events, major geomagnetic storms, and major SEP events that occurred during the years 2010 - 2012. Highlights of major tools/resources will be provided.

  18. Research Overview on Wireless Power Transmission Technology

    OpenAIRE

    Li Tao; Wu Liheng; Chen Zheng

    2015-01-01

    According to the latest researches, this paper outlines the development of wireless power transmission and introduces the latest applications of wireless power transmission in life. To describe the wireless power transmission technologies in detail, the paper presents the short-range, medium-range and remote wireless power transmission, respectively. In addition, the paper also depicts some unique properties of wireless power transmission system to make readers understand WPT system better. A...

  19. Actions Needed to Ensure Scientific and Technical Information is Adequately Reviewed at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center

    Science.gov (United States)

    2008-01-01

    This audit was initiated in response to a hotline complaint regarding the review, approval, and release of scientific and technical information (STI) at Johnson Space Center. The complainant alleged that Johnson personnel conducting export control reviews of STI were not fully qualified to conduct those reviews and that the reviews often did not occur until after the STI had been publicly released. NASA guidance requires that STI, defined as the results of basic and applied scientific, technical, and related engineering research and development, undergo certain reviews prior to being released outside of NASA or to audiences that include foreign nationals. The process includes technical, national security, export control, copyright, and trade secret (e.g., proprietary data) reviews. The review process was designed to preclude the inappropriate dissemination of sensitive information while ensuring that NASA complies with a requirement of the National Aeronautics and Space Act of 1958 (the Space Act)1 to provide for the widest practicable and appropriate dissemination of information resulting from NASA research activities. We focused our audit on evaluating the STI review process: specifically, determining whether the roles and responsibilities for the review, approval, and release of STI were adequately defined and documented in NASA and Center-level guidance and whether that guidance was effectively implemented at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center. Johnson was included in the review because it was the source of the initial complaint, and Goddard, Langley, and Marshall were included because those Centers consistently produce significant amounts of STI.

  20. Actions Needed to Ensure Scientific and Technical Information is Adequately Reviewed at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center

    Science.gov (United States)

    2008-01-01

    This audit was initiated in response to a hotline complaint regarding the review, approval, and release of scientific and technical information (STI) at Johnson Space Center. The complainant alleged that Johnson personnel conducting export control reviews of STI were not fully qualified to conduct those reviews and that the reviews often did not occur until after the STI had been publicly released. NASA guidance requires that STI, defined as the results of basic and applied scientific, technical, and related engineering research and development, undergo certain reviews prior to being released outside of NASA or to audiences that include foreign nationals. The process includes technical, national security, export control, copyright, and trade secret (e.g., proprietary data) reviews. The review process was designed to preclude the inappropriate dissemination of sensitive information while ensuring that NASA complies with a requirement of the National Aeronautics and Space Act of 1958 (the Space Act)1 to provide for the widest practicable and appropriate dissemination of information resulting from NASA research activities. We focused our audit on evaluating the STI review process: specifically, determining whether the roles and responsibilities for the review, approval, and release of STI were adequately defined and documented in NASA and Center-level guidance and whether that guidance was effectively implemented at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center. Johnson was included in the review because it was the source of the initial complaint, and Goddard, Langley, and Marshall were included because those Centers consistently produce significant amounts of STI.

  1. A Survey of Research Performed at NASA Langley Research Center's Impact Dynamics Research Facility

    Science.gov (United States)

    Jackson, K. E.; Fasanella, E. L.

    2003-01-01

    The Impact Dynamics Research Facility (IDRF) is a 240-ft-high gantry structure located at NASA Langley Research Center in Hampton, Virginia. The facility was originally built in 1963 as a lunar landing simulator, allowing the Apollo astronauts to practice lunar landings under realistic conditions. The IDRF was designated a National Historic Landmark in 1985 based on its significant contributions to the Apollo Program. In 1972, the facility was converted to a full-scale crash test facility for light aircraft and rotorcraft. Since that time, the IDRF has been used to perform a wide variety of impact tests on full-scale aircraft and structural components in support of the General Aviation (GA) aircraft industry, the US Department of Defense, the rotorcraft industry, and NASA in-house aeronautics and space research programs. The objective of this paper is to describe most of the major full-scale crash test programs that were performed at this unique, world-class facility since 1974. The past research is divided into six sub-topics: the civil GA aircraft test program, transport aircraft test program, military test programs, space test programs, basic research, and crash modeling and simulation.

  2. PROCEEDINGS OF THE 2002 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM.

    Energy Technology Data Exchange (ETDEWEB)

    MCDONALD,R.J.

    2002-08-20

    This is the PROCEEDINGS OF THE 2002 NATIONAL OILHEAT RESEARCH ALLIANCE TECHNOLOGY SYMPOSIUM, which was Held at Oilheat Visions Conference, Rhode Island Convention Center, Providence, Rhode Island, August 20-21, 2002. The specific objectives of this conference are to: (1) identify and evaluate the current state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely; and (2) foster cooperative interactions among federal and industrial representatives for the common goal of sustained economic growth and energy security via energy conservation.

  3. Multi-Level Evaluation of Cooperative Research Centers: Bridging between the Triple Helix and the Science of Team Science

    Science.gov (United States)

    Gray, Denis O.; Sundstrom, Eric

    2010-01-01

    Two emergent conceptual models for fostering the development of innovative technology through applied science at Cooperative Research Centers (CRCs)--the Triple Helix and the science of team science--have proved highly productive in stimulating research into how the innovation process works. Although the two arenas for fostering innovation have…

  4. Natural and Accelerated Bioremediation Research (NABIR) Field Research Center (FRC) Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    Watson, D.B.

    2002-02-28

    The Environmental Sciences Division at Oak Ridge National Laboratory has established a Field Research Center (FRC) to support the Natural and Accelerated Bioremediation Research (NABIR) Program on the U.S. Department of Energy (DOE) Oak Ridge Reservation in Oak Ridge, Tennessee for the DOE Headquarters Office of Biological and Environmental Research within the Office of Science.

  5. Natural and Accelerated Bioremediation Research (NABIR) Field Research Center (FRC) Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    Watson, D.B.

    2002-02-28

    The Environmental Sciences Division at Oak Ridge National Laboratory has established a Field Research Center (FRC) to support the Natural and Accelerated Bioremediation Research (NABIR) Program on the U.S. Department of Energy (DOE) Oak Ridge Reservation in Oak Ridge, Tennessee for the DOE Headquarters Office of Biological and Environmental Research within the Office of Science.

  6. The evaluation of the individual impact factor of researchers and research centers using the RC algorithm.

    Science.gov (United States)

    Cordero-Villafáfila, Amelia; Ramos-Brieva, Jesus A

    2015-01-01

    The RC algorithm quantitatively evaluates the personal impact factor of the scientific production of isolated researchers. The authors propose an adaptation of RC to evaluate the personal impact factor of research centers, hospitals and other research groups. Thus, these could be classified according to the accredited impact of the results of their scientific work between researchers of the same scientific area. This could be useful for channelling budgets and grants for research.

  7. [New technologies: support opportunities for network research].

    Science.gov (United States)

    Rodríguez-Martín, A; Novalbos Ruiz, J P; Jiménez-Rodríguez, R; Jiménez-Rodríguez, A

    2012-11-01

    The consolidation of a support area for network research, which promotes collaborative research, training and the dissemination of knowledge through the use of ICTs, requires the organization of a work methodology to share and exchange resources in a specific network that is already running. The establishment of communication mechanisms between researchers from different groups will be necessary along with the introduction of the ICTs in the teaching and advanced environments of research training, different inventories of the research resources that are available for exchanges and shared use between groups and laboratories, and finally, a shared scientific documentation system with the appropriate maintenance of the previously listed tools. Large administrative structures and detailed plans are not needed to comply with all of the above functions. The availability of effective tools, however, to combine efforts and search for resources in all of these areas is needed, with the agility and flexibility that allow us to currently use new communication and information technologies. The results of this research support area should lead to an increase in the efficacy and quality of the network by increasing the flow of information and the inter-group collaboration in teaching, research and professional development, along with the transfer and dissemination of research results.

  8. Data center network architecture in cloud computing:review, taxonomy, and open research issues

    Institute of Scientific and Technical Information of China (English)

    Han QI; Muhammad SHIRAZ; Jie-yao LIU; Abdullah GANI; Zulkanain ABDUL RAHMAN; Torki AALTAMEEM

    2014-01-01

    The data center network (DCN), which is an important component of data centers, consists of a large number of hosted servers and switches connected with high speed communication links. A DCN enables the deployment of resources centralization and on-demand access of the information and services of data centers to users. In recent years, the scale of the DCN has constantly increased with the widespread use of cloud-based services and the unprecedented amount of data delivery in/between data centers, whereas the traditional DCN architecture lacks aggregate bandwidth, scalability, and cost effectiveness for coping with the increasing demands of tenants in accessing the services of cloud data centers. Therefore, the design of a novel DCN architecture with the features of scalability, low cost, robustness, and energy conservation is required. This paper reviews the recent research fi ndings and technologies of DCN architectures to identify the issues in the existing DCN architectures for cloud computing. We develop a taxonomy for the classifi cation of the current DCN architectures, and also qualitatively analyze the traditional and contemporary DCN architectures. Moreover, the DCN architectures are compared on the basis of the signifi cant characteristics, such as bandwidth, fault tolerance, scalability, overhead, and deployment cost. Finally, we put forward open research issues in the deployment of scalable, low-cost, robust, and energy-efficient DCN architecture, for data centers in computational clouds.

  9. Research and Practice in Green Chemical Technologies

    Institute of Scientific and Technical Information of China (English)

    Yin Yingwu

    2004-01-01

    Green chemistry is also called environment harmless or environment friendly chemistry.Green chemistry requires to use new synthetic methods, engineering technologies and processes to eliminate or reduce by-products, wastes or products that harmful to human health, community safety,and ecology environment. Green chemistry pursues to control the usage of the harmful and toxic materials, reduce waste emission, avoid necessity to treat the wastes; Green Chemistry advocates wastes management from the beginning, improving the efficiency of atoms, optimizing the use of resources and energy, lowering the cost of production. Green Chemistry technologies are the ultimate path to the clean chemical production in the future.Insight Co. takes "hospital of enterprises" and "bank of technologies" as our characteristics in business, and deems the development and spread of green chemistry as our mission. We developed an unique business model which combines education, research and production. In the past 8 years,we had applied and obtained more than 30 patents and received more than ten national and provincial awards in technology progress.We had made great progress in the manufacturing of organophosphorus pesticides, especially the production of omethoate, methamidophos, paraquat and glycyrrhizinic phosphor, etc., which made a stable foundation for INSIGHT's development. We had also achieved great success in the high efficiency low toxic pesticides, such as imidacloprid, etofenprox, metalaxyl and in the new synthetic methods in various amino acids as well as in the pharmaceutical intermediates. The new method of preparation indigo using N-phenylglycinonitrile is an advanced process in the world in terms of the clean production technology for Ferro cyanide and HCN's transformation rate improvement. We solved the pollution problem of the old route. The newly developed substituted product for indigo using a clean production technology which greatly reduced the material consumption and

  10. 五轴联动车铣复合加工中心误差补偿技术的研究%Research on Error Compensation Technology of Five-axis Turning & Milling Composite NC Machining Center

    Institute of Scientific and Technical Information of China (English)

    范晋伟; 蒙顺政; 罗建平; 李伟; 雒驼

    2012-01-01

    For the geometric errors produced problems of five-axis turning & milling composite machining center produced by manufacturing, assembly and movement, this article takes the multi-body system as the basis, according complex structure characteristics of the turning&milling center, we can build the movement error models of turning&milling center under the milling mode and turning mode, and gives the method to solve precision CNC instructions and conduct error compensation simulation test. The experimental results show that the geometry motion error model of turning&milling composite machining center is correct, which build by multi-body system theory; Using the Iteration method to solve the precision CNC instructions is accurate and fast; Software error compensation need less cost, and the effect is obvious.%针对五轴联动车铣复合加工中心制造、装配和运动过程产生的几何误差问题,文章以多体系统运动学理论为基础,根据车铣中心的复杂结构特点,分别建立了车铣中心的铣削模式和车削模式下的运动误差模型,并给出了精密数控指令的求解方法和进行了误差补偿仿真试验.实验结果表明:采用多体系统运动学理论建立车铣复合加工中心的几何运动误差模型是正确性;迭代法求解的精密数控指令准确、快捷;软件误差补偿投入少、效果明显.

  11. Energy Technology Division research summary 1997.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-21

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book. This Overview highlights some major trends. Research related to the operational safety of commercial light water

  12. Environment, Safety and Health Progress Assessment of the Morgantown Energy Technology Center (METC)

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    This report documents the result of the US Department of Energy`s (DOE) Environment, Safety and Health (ES&H) Progress Assessment of the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. METC is currently a research and development facility, managed by DOE`s Office of Fossil Energy. Its goal is to focus energy research and development to develop engineered fossil fuel systems, that are economically viable and environmentally sound, for commercial application. There is clear evidence that, since the 1991 Tiger Team Assessment, substantial progress has been made by both FE and METC in most aspects of their ES&H program. The array of new and restructured organizations, systems, and programs at FE and METC; increased assignments of staff to support these initiatives; extensive training activities; and the maturing planning processes, all reflect a discernable, continuous improvement in the quality of the ES&H performance.

  13. Energy Frontier Research Centers: Science for Our Nation's Energy Future, September 2016

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-09-01

    As world demand for energy rapidly expands, transforming the way energy is collected, stored, and used has become a defining challenge of the 21st century. At its heart, this challenge is a scientific one, inspiring the U.S. Department of Energy’s (DOE) Office of Basic Energy Sciences (BES) to establish the Energy Frontier Research Center (EFRC) program in 2009. The EFRCs represent a unique approach, bringing together creative, multidisciplinary scientific teams to perform energy-relevant basic research with a complexity beyond the scope of single-investigator projects. These centers take full advantage of powerful new tools for characterizing, understanding, modeling, and manipulating matter from atomic to macroscopic length scales. They also train the next-generation scientific workforce by attracting talented students and postdoctoral researchers interested in energy science. The EFRCs have collectively demonstrated the potential to substantially advance the scientific understanding underpinning transformational energy technologies. Both a BES Committee of Visitors and a Secretary of Energy Advisory Board Task Force have found the EFRC program to be highly successful in meeting its goals. The scientific output from the EFRCs is impressive, and many centers have reported that their results are already impacting both technology research and industry. This report on the EFRC program includes selected highlights from the initial 46 EFRCs and the current 36 EFRCs.

  14. The Wetland and Aquatic Research Center strategic science plan

    Science.gov (United States)

    ,

    2017-02-02

    IntroductionThe U.S. Geological Survey (USGS) Wetland and Aquatic Research Center (WARC) has two primary locations (Gainesville, Florida, and Lafayette, Louisiana) and field stations throughout the southeastern United States and Caribbean. WARC’s roots are in U.S. Fish and Wildlife Service (USFWS) and National Park Service research units that were brought into the USGS as the Biological Research Division in 1996. Founded in 2015, WARC was created from the merger of two long-standing USGS biology science Centers—the Southeast Ecological Science Center and the National Wetlands Research Center—to bring together expertise in biology, ecology, landscape science, geospatial applications, and decision support in order to address issues nationally and internationally. WARC scientists apply their expertise to a variety of wetland and aquatic research and monitoring issues that require coordinated, integrated efforts to better understand natural environments. By increasing basic understanding of the biology of important species and broader ecological and physiological processes, this research provides information to policymakers and aids managers in their stewardship of natural resources and in regulatory functions.This strategic science plan (SSP) was developed to guide WARC research during the next 5–10 years in support of Department of the Interior (DOI) partnering bureaus such as the USFWS, the National Park Service, and the Bureau of Ocean Energy Management, as well as other Federal, State, and local natural resource management agencies. The SSP demonstrates the alignment of the WARC goals with the USGS mission areas, associated programs, and other DOI initiatives. The SSP is necessary for workforce planning and, as such, will be used as a guide for future needs for personnel. The SSP also will be instrumental in developing internal funding priorities and in promoting WARC’s capabilities to both external cooperators and other groups within the USGS.

  15. INJECTION TECHNOLOGY RESEARCH OF THE PROTECTIVE SCREEN

    Directory of Open Access Journals (Sweden)

    MENEJLYUK A. I.

    2016-12-01

    Full Text Available Formulation of the problem. This article contains information about the methods and the planning principles used in experimental research study of the injection technology of impervious screen. Today, there are ways to create impervious screens and curtains solve soil protection issues in the field impermeable layer arrangement at a shallow depth. However, for Ukraine, in the burial sites of radiation and other wastes is urgent issue of protection of underground space in places with deep impermeable layer. Classical methods can not fully solve such problems. To solve them, you need to develop innovative technology to create such a screen, which will lie authentic sole object to be protected, at the project depth. For the experiments, it is necessary to choose the most important indicator, and technological factors affecting it. This is due to the fact that the proposed technology provides for lesser known technical solutions, the use of which should ultimately result in impervious screens with desired properties. Goal. The aim of this study is the selection of technological parameters of injection, design of experiments and the selection of indicators characterizing the efficient operation of the screen. Such constructs must first have almost zero permeability. In this paper, it was of interest to study the influence of process parameters on the filtration rate of the protective screen. Conclusion. As a result of the design of experiments, the basic technological factors that have a significant effect on the studied parameters. varying levels of these factors are also identified, which in turn makes it possible to determine the optimum process parameters creating a screen that meets all the desired properties and characteristics. Based on a series of experiments it is possible to obtain optimal formulations for different types of soils.

  16. Physical and Chemical Sciences Center: Research briefs. Volume 9-94

    Energy Technology Data Exchange (ETDEWEB)

    Vook, F.L.; Samara, G.A. [eds.

    1994-12-31

    As Sandia National Laboratories and the Physical and Chemical Sciences Center develop an increasingly diverse set of customers, research partners, and Cooperative Research and Development Agreements (CRADA`s) with industry, there is a need for providing more concise information describing the technical achievements and capabilities. This publication, Research Briefs, is designed to inform the present and potential partners in research and technology advancement. The research emphasizes semiconductor physics, electronic materials, surface physics and chemistry, plasma and chemical processing sciences, lasers and optics, vision science, ion-solid interactions and defect physics, and advanced materials physics. The specific programs pursued are driven by the research goals which are greatly influenced by interactions with the government and industrial customers.

  17. Jackson State University's Center for Spatial Data Research and Applications: New facilities and new paradigms

    Science.gov (United States)

    Davis, Bruce E.; Elliot, Gregory

    1989-01-01

    Jackson State University recently established the Center for Spatial Data Research and Applications, a Geographical Information System (GIS) and remote sensing laboratory. Taking advantage of new technologies and new directions in the spatial (geographic) sciences, JSU is building a Center of Excellence in Spatial Data Management. New opportunities for research, applications, and employment are emerging. GIS requires fundamental shifts and new demands in traditional computer science and geographic training. The Center is not merely another computer lab but is one setting the pace in a new applied frontier. GIS and its associated technologies are discussed. The Center's facilities are described. An ARC/INFO GIS runs on a Vax mainframe, with numerous workstations. Image processing packages include ELAS, LIPS, VICAR, and ERDAS. A host of hardware and software peripheral are used in support. Numerous projects are underway, such as the construction of a Gulf of Mexico environmental data base, development of AI in image processing, a land use dynamics study of metropolitan Jackson, and others. A new academic interdisciplinary program in Spatial Data Management is under development, combining courses in Geography and Computer Science. The broad range of JSU's GIS and remote sensing activities is addressed. The impacts on changing paradigms in the university and in the professional world conclude the discussion.

  18. Qualitative Research Methods in Education and Educational Technology. Research Methods for Educational Technology

    Science.gov (United States)

    Willis, Jerry W.

    2008-01-01

    "Qualitative Research Methods in Education and Educational Technology" was written for students and scholars interested in exploring the many qualitative methods developed over the last 50 years in the social sciences. The book does not stop, however, at the boundaries of the social sciences. Social scientists now consume and use research methods…

  19. Environmental Remediation Technologies Derived from Space Industry Research

    Science.gov (United States)

    Quinn, Jacqueline; Sauser, Brian; Helminger, Andrew

    2004-01-01

    Beginning in the 1950s and 1960s, an abundance of effort and initiative was focused on propelling the space industry outward for planetary exploration and habitation. During these early years, the push to take space science to new levels indirectly contributed to the evolution of another science field that would not fully surface until the early 1980s, environmental remediation. This field is associated with the remediation or cleanup of environmental resources such as groundwater, soil, and sediment. Because the space-exploration initiative began prior to the establishment of the U.S. Environmental Protection Agency (EPA) in December of 1970, many NASA Centers as well as space-related support contractors allowed for the release of spent chemicals into the environment. Subsequently, these land owners have been directed by the EPA to responsibly initiate cleanup of their impacted sites. This paper will focus on the processes and lessons learned with the development, testing, and commercialization initiatives associated with four remediation technologies. The technologies include installation techniques for permeable reactive barriers (PRBs), the use of ultrasound to improve long-term performance of PRBs, emulsified zero-valent iron for product-level solvent degradation, and emulsion technologies for application to metal and polychlorinated biphenyl contaminated media. Details of the paper cover technology research, evaluation, and testing; contracts and grants; and technology transfer strategies including patenting, marketing, and licensing.

  20. Information for Our Partners | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    NCI TTC CRADA PAYMENT OPTIONS: Electronic Payments by Wire Transfer via Fedwire, Mail a check to the Institute or Center, or Automated Clearing House (ACH)/Electronic Funds Transfer (ETF) payments via Pay.gov (NCI ONLY). | [google6f4cd5334ac394ab.html