WorldWideScience

Sample records for technologies froth

  1. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    A study conducted by Pittsburgh Energy Technology Center of sulfur emissions from about 1,300 United States coal-fired utility boilers indicated that half of the emissions were the result of burning coals having greater than 1.2 pounds of SO[sub 2] per million BTU. This was mainly attributed to the high pyritic sulfur content of the boiler fuel. A significant reduction in SO[sub 2] emissions could be accomplished by removing the pyrite from the coals by advanced physical fine coal cleaning. An engineering development project was prepared to build upon the basic research effort conducted under a solicitation for research into Fine Coal Surface Control. The engineering development project is intended to use general plant design knowledge and conceptualize a plant to utilize advanced froth flotation technology to process coal and produce a product having maximum practical pyritic sulfur reduction consistent with maximum practical BTU recovery.

  2. Engineering development of advanced physical fine coal cleaning technologies - froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    Ferris, D.D.; Bencho, J.R. [ICF Kaiser Engineers, Inc., Pittsburgh, PA (United States)

    1995-11-01

    In 1988, ICF Kaiser Engineers was awarded DOE Contract No. DE-AC22-88PC88881 to research, develop, engineer and design a commercially acceptable advanced froth flotation coal cleaning technology. The DOE initiative is in support of the continued utilization of our most abundant energy resource. Besides the goal of commercialability, coal cleaning performance and product quality goals were established by the DOE for this and similar projects. primary among these were the goals of 85 percent energy recovery and 85 percent pyrite rejection. Three nationally important coal resources were used for this project: the Pittsburgh No. 8 coal, the Upper Freeport coal, and the Illinois No. 6 coal. Following is a summary of the key findings of this project.

  3. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    An engineering development project was prepared to build upon the basic research effort conducted under a solicitation for research into Fine Coal Surface Control. The engineering development project is intended to use general plant design knowledge and conceptualize a plant to utilize advanced froth flotation technology to process coal and produce a product having maximum practical pyritic sulfur reduction consistent with maximum practical BTU recovery. This is being accomplished by utilization the basic research data on the surface properties of coal, mineral matter and pyrite obtained from the Coal Surface Control for Advanced Fine Coal Flotation Project, to develop this conceptual flowsheet. The conceptual flowsheet must be examined to identify critical areas that need additional design data. This data will then be developed using batch and semi-continuous bench scale testing. In addition to actual bench scale testing other unit operations from other industries processing fine material will be reviewed for potential application and incorporated into the design if appropriate. 31 figs., 22 tabs.

  4. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation. Quarterly technical progress report No. 16, July 1, 1992--September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    A study conducted by Pittsburgh Energy Technology Center of sulfur emissions from about 1,300 United States coal-fired utility boilers indicated that half of the emissions were the result of burning coals having greater than 1.2 pounds of SO{sub 2} per million BTU. This was mainly attributed to the high pyritic sulfur content of the boiler fuel. A significant reduction in SO{sub 2} emissions could be accomplished by removing the pyrite from the coals by advanced physical fine coal cleaning. An engineering development project was prepared to build upon the basic research effort conducted under a solicitation for research into Fine Coal Surface Control. The engineering development project is intended to use general plant design knowledge and conceptualize a plant to utilize advanced froth flotation technology to process coal and produce a product having maximum practical pyritic sulfur reduction consistent with maximum practical BTU recovery.

  5. Engineering development of advanced froth flotation. Volume 2, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Ferris, D.D.; Bencho, J.R.; Torak, E.R. [ICF Kaiser Engineers, Inc., Pittsburgh, PA (United States)

    1995-03-01

    This report is an account of findings related to the Engineering and Development of Advanced Froth Flotation project. The results from benchscale and proof-of-concept (POC) level testing are presented and the important results from this testing are used to refine a conceptual design and cost estimate for a 20 TPH Semi-Works Facility incorporating the final proposed technology.

  6. Frothing in flotation. Volume 2: Recent advances in coal processing

    Energy Technology Data Exchange (ETDEWEB)

    Laskowski, J.S. [ed.] [Univ. of British Columbia, Vancouver, British Columbia (Canada); Woodburn, E.T. [ed.] [Univ. of Manchester Inst. of Science and Technology (United Kingdom)

    1998-11-01

    This volume summarizes the achievements on various aspects of flotation froth properties and behavior, and relationship between froth appearance and flotation performance. Flotation kinetics involves a number of mass transfer processes with some of them being critically determined by the behavior of froth. Since froth is complex, and controlled experimentation is difficult, the froth phase was, until recently, either ignored or treated entirely empirically. With wide applications of flotation columns, the behavior of the froth is now often recognized as being dominant in determining flotation performance, and the research in this area is one of the most actively pursued. Contents include: Frothers and frothing; Effect of particle and bubble size on flotation kinetics; Water content and distribution in flotation froths; Mechanisms operating in flotation froths; Characterization of flotation froth; Simultaneous determination of collection zone rate constant and froth zone recovery factor; Modelling of froth dynamics with implications for feed-back control; The interrelationship between flotation variables and froth appearance; Froth image analysis in a flotation control system; Kinetic flotation modelling using froth imaging data; and Dependence of froth behavior on galvanic interactions.

  7. Selective detachment process in column flotation froth

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Ozsever, A.V.; Parekh, B.K. [University of Kentucky, Lexington, KY (United States). Dept. of Mining Engineering

    2006-05-15

    The selectivity in flotation columns involving the separation of particles of varying degrees of floatability is based on differential flotation rates in the collection zone, reflux action between the froth and collection zones, and differential detachment rates in the froth zone. Using well-known theoretical models describing the separation process and experimental data, froth zone and overall flotation recovery values were quantified for particles in an anthracite coal that have a wide range of floatability potential. For highly floatable particles, froth recovery had a very minimal impact on overall recovery while the recovery of weakly floatable material was decreased substantially by reductions in froth recovery values. In addition, under carrying-capacity limiting conditions, selectivity was enhanced by the preferential detachment of the weakly floatable material. Based on this concept, highly floatable material was added directly into the froth zone when treating the anthracite coal. The enriched froth phase reduced the product ash content of the anthracite product by five absolute percentage points while maintaining a constant recovery value.

  8. Self lubrication of bitumen froth in pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, D.D. [Univ. of Minnesota, Minneapolis, MN (United States)

    1997-12-31

    In this paper I will review the main properties of water lubricated pipelines and explain some new features which have emerged from studies of self-lubrication of Syncrudes` bitumen froth. When heavy oils are lubricated with water, the water and oil are continuously injected into a pipeline and the water is stable when in a lubricating sheath around the oil core. In the case of bitumen froth obtained from the Alberta tar sands, the water is dispersed in the bitumen and it is liberated at the wall under shear; water injection is not necessary because the froth is self-lubricating.

  9. Analysis of Texture of Froth Image in Coal Flotation

    Institute of Scientific and Technical Information of China (English)

    路迈西; 王凡; 刘晓文日; 刘文礼; 王勇

    2001-01-01

    Froth image features of coal flotation have been extracted and studied by neighboring grey level dependence matrix, spatial grey level dependence matrix and grey level histogram. In this paper, a basic algorithm of unsupervised learning pattern classification is presented, and coal flotation froth images are classified by means of self-organizing map (SOM). By extracting features from 51 flotation froth images with laboratory column, four types of froth images are classified. The correct rate of SOM cluster is satisfactory. And a good relationship of froth type with average ash content is also observed.

  10. Steam-frothing of milk for coffee

    DEFF Research Database (Denmark)

    Münchow, Morten; Jørgensen, Leif; Amigo Rubio, Jose Manuel

    2015-01-01

    A method for evaluation of the foaming properties of steam-frothed milk, based on image analysis (feature extraction) carried out on a video taken immediately after foam formation, was developed. The method was shown to be able to analyse steam-frothed milk made using a conventional espresso...... machine, such as commonly used by baristas. Samples of milk, processed in a commercial dairy plant, were made with varying fat (0.5%, 0.9%, 1.5%, 2.6%, 3.5%) or protein (3.0%, 3.4%. 3.8%) content and analysed using the developed method. Increased protein content was shown to cause a delay in the formation...

  11. Evaluation of the selective detachment process in flotation froth

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Ozsever, A.V. [University of Kentucky, Lexington, KY (United States). Dept. for Mining Engineering

    2003-10-01

    The improved selectivity between particles of varying degrees of hydrophobicity in flotation froths has been well documented in literature, especially in the deep froths utilized in flotation columns. The phenomenon is believed to be due to the selective detachment process whereby the least hydrophobic particles are released from the bubble surface upon bubble coalescence. To quantify the selective detachment process, column flotation experiments were performed under various operating conditions that provided varying amounts of reflux between the froth and collection zones. The flotation column incorporated the ability to provide instantaneous stoppage of the process streams and separation between the collection and froth zones after ensuring steady-state operation of the column. The samples collected from the two zones and process streams were evaluated to quantify the flotation rate distribution of the particles comprising each sample. The flotation rate was used as an indicator of the degree of hydrophobicity and thus a relative measure of the binding force between the particle and bubble in the froth zone. The flotation rate data was used as input into well known flotation models to obtain the froth zone recovery rate and the quantity of material that refluxes between the collection and froth zones.

  12. Study on Non-Collision Mineralizing Mechanism of Froth Cyclone

    Institute of Scientific and Technical Information of China (English)

    董平; 许占贤; 周晓玲

    2002-01-01

    On the basis of the mineralizing mechanism of froth cyclone, this paper expounds that the froth cyclone flotation process is accomplished in a limited centrifugal field. The main feature of air bubble mineralizing in the froth cyclone is a synthetic mineralizing process, of which the non-collision mineralization of minute air bubble separated out dominates, supplemented with the collision mineralization. Moreover, this paper points out that the hydrophobic separated out and centrifugal force strengthen the selectivity of fine coal particle, accelerate the flotation speed and improve the slime recovery.

  13. Effect of solvent selection on froth treatment for mining operations

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, H.A. [Natural Resources Canada, Devon, AB (Canada). CANMET Energy Technology Centre

    2003-07-01

    The heavy oil (bitumen) industry is important for the Canadian economy. The oil sands are unique to Canada and government support is crucial for continued research into the development of technologies and products which make less of an impact on the environment. This paper describes a successful collaboration between the Canada Centre for Mineral and Energy Technology (CANMET) and Shell Canada which led to the 2003 award for Advanced Separation Technologies (AST). This PowerPoint presentation reviews feeds for a naphtha solvent treatment versus a paraffinic solvent treatment. The feeds include bitumen froth, low quality bitumen emulsions, in-situ heavy oil emulsions, and bitumen. Microscope images for each of these feeds were illustrated. The typical elements of the solvent treatment process were also outlined in a flow chart. The main feature of the naphtha process is that it is well established plus it renders a product with 1.5 to 4 per cent water and 0.5 per cent solids. It needs chemical demulsifiers and no asphaltene is rejected. The main feature of the paraffinic process is that it produces a product with low water/solids content and asphaltene levels can be controlled. The process requires less solvent for pipelining because of its reduced viscosity and if offers flexibility in terms of upgrading options. The presentation listed achievements in AST by Albian Sands, TrueNorth, Canadian Natural Resources Ltd., Suncor, Syncrude, and AEC Pipelines Ltd. tabs., figs.

  14. Impact of Solvents Treatment on the Wettability of Froth Solids

    Science.gov (United States)

    Yang, Fan

    The purpose of this study is to investigate the impact of solvent addition to bitumen froth on the wettability of froth solids. The wettability of solids determines the transportation/partitioning of the solids between phases, which in turn affects the solids and water rejection in a Clark hot water extraction process (CHWE). The impact of solvents treatment on the wettability of froth solids was studied using both a model system and a real bitumen froth system. The vulnerabilities of four kinds of model minerals to hydrocarbon contamination/wettability alteration in different solvents were compared and discussed by considering solvent composition and mineral types. The wettability of solids extracted from the industrial froth using different solvents was also compared. The XRD analysis on these solids confirmed the partitioning behavior of solids observed in model solids system. The results from this study indicate that the composition of paraffinic/aromatic solvent in an industrial froth treatment process could be tailor-optimized to achieve a better solids/water rejection.

  15. Effect of solids on pulp and froth properties in flotation

    Institute of Scientific and Technical Information of China (English)

    张炜

    2014-01-01

    Froth flotation is a widely used process of particle separation exploiting differences in surface properties. It is important to point out that overall flotation performance (grade and recovery) is a consequence of the quality and quantity of the solid particles collected from the pulp phase, transported into the froth phase, and surviving as bubble-particle aggregates into the overflow. This work will focus on studying these phenomena and will incorporate the effects of particle hydrophobicities in the 3-phase system. Solids are classed as either hydrophilic non-sulphide gangue (e.g. silica, talc), hydrophilic sulphide (e.g. pyrite), or hydrophobic sulphide (e.g. sphalerite). Talc is a surface-active species of gangue that has been shown to behave differently from silica (frother adsorbs on the surface of talc particles). Both are common components of ores and will be studied in detail. The focus of this work is to investigate the role of solids on pulp hydrodynamics, froth bubble coalescence intensity, water overflow rate with solids present, and in particular, the interactions between solids, frother and gas on the gas dispersion parameters. The results show that in the pulp zone there is no effect of solids on bubble size and gas holdup;in the froth zone, although hydrophilic particles solely do not effect on the water overflow rate, hydrophobic particles produce higher intensity of rates on water overflow and bubble coalescence, and many be attributed to the water reattachment.

  16. Relationship between solids flux and froth features in batch flotation of sulphide ore

    Institute of Scientific and Technical Information of China (English)

    YANG Xiao-sheng; Aldrich Chris

    2005-01-01

    The froth features in the batch flotation of a sulphide ore were investigated by using the digital image parameters of the froth, the small number emphasis(Nsne), the average grey level(Dagl) and the instability number(Nins), under different conditions of impeller speeds and aeration rates. It is found that the value of Nsne is strongly dependent on the average bubble size of the froth and Dagl on the volume fraction of solid in the froth, and the froth features during the batch flotation are influenced by impeller speed and aeration rate. A kinetic model of the concentrate solid flux was developed which relates the flotation process to the image parameters, Nsne and Dagl of the froth and predictions are well consistent with the experimental data.

  17. Demonstration of the exponential decay law using beer froth

    Energy Technology Data Exchange (ETDEWEB)

    Leike, A. [Ludwig-Maximilians-Universitaet, Sektion Physik, Munich (Germany)]. E-mail: leike@theorie.physik.uni-muenchen.de

    2002-01-01

    The volume of beer froth decays exponentially with time. This property is used to demonstrate the exponential decay law in the classroom. The decay constant depends on the type of beer and can be used to differentiate between different beers. The analysis shows in a transparent way the techniques of data analysis commonly used in science - consistency checks of theoretical models with the data, parameter estimation and determination of confidence intervals. (author)

  18. Dynamic Modeling and Real-Time Monitoring of Froth Flotation

    Directory of Open Access Journals (Sweden)

    Khushaal Popli

    2015-08-01

    Full Text Available A dynamic fundamental model was developed linking processes from the microscopic scale to the equipment scale for batch froth flotation. State estimation, fault detection, and disturbance identification were implemented using the extended Kalman filter (EKF, which reconciles real-time measurements with dynamic models. The online measurements for the EKF were obtained through image analysis of froth images that were captured and analyzed using the commercial package VisioFroth (Metsor Minerals. The extracted image features were then correlated to recovery using principal component analysis and partial least squares regression. The performance of real-time state estimation and fault detection was validated using batch flotation of pure galena at various operating conditions. The image features that were strongly representative of recovery were identified, and calibration and validation were performed against off-line measurements of recovery. The EKF successfully captured the dynamics of the process by updating the model states and parameters using the online measurements. Finally, disturbances in the air flow rate and impeller speed were introduced into the system, and the dynamic behavior of the flotation process was successfully tracked and the disturbances were identified using state estimation.

  19. A modified release analysis procedure using advanced froth flotation mechanisms. Technical report, September 1--November 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Mohanty, M.K. [Southern Illinois Univ., Carbondale, IL (United States). Dept. of Mining Engineering

    1995-12-31

    The objective of this study is to reinvestigate the release analysis procedure, which is traditionally conducted using a laboratory Denver cell, and to develop a modified process that can be used for all froth flotation technologies. Recent studies have found that the separation performance achieved by multiple stage cleaning and, in some cases, single stage cleaning using column flotation is superior to the performance achieved by the traditional release procedure. These findings are a result of the advanced flotation mechanisms provided by column flotation, which will be incorporated into a modified release analysis procedure developed in this study. A fundamental model of an open column has been developed which incorporates the effects of system hydrodynamics, froth drop-back, selective and non-selective detachment, operating parameters, feed solids content, and feed component flotation kinetics. Simulation results obtained during this reporting period indicate that the ultimate separation that can be achieved by a column flotation process can only be obtained in a single cleaning stage if the detachment mechanism in the froth phase is highly selective, which does not appear to occur in practice based on experimental results. Two to three cleaning stages were found to be required to obtain the ultimate performance if non-selective detachment or kinetic limiting conditions are assumed. this simulated finding agrees well with the experimental results obtained from the multiple stage cleaning of an Illinois No. 5 seam coal using the Packed-Column. Simulated results also indicate that the separation performance achieved by column flotation improves with increasing feed solids content after carrying-capacity limiting conditions are realized. These findings will be utilized in the next reporting period to modify the traditional release analysis procedure.

  20. Development of an on-line froth vision system for control of coal flotation

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, K.K.; Holtham, P.N.; Brake, I.R. [University of Queensland, Brisbane, Qld. (Australia). Julius Kruttschnitt Mineral Research Centre

    1998-12-31

    Flotation is one of the important processes used to recover minus 0.5 mm coal, but the automatic control of flotation has always been difficult due to a lack of suitable process instrumentation. While cell levels can be readily measured, and feed and tailings pulps can be assayed for ash level and solids concentration using on-stream analysers, these measurements alone are not generally sufficient for effective process control. Visual inspection of froth conditions by the flotation operator can provide additional data, and experienced operators are able to make process adjustments based on examination of froth characteristics such as average bubble size and froth mobility. At present, instrumentation to evaluate the appearance of the froth is not available, and hence this aspect of flotation plant operation is still manually controlled. This paper presents the results from the development of an industrial video-based pattern recognition system for image analysis of flotation froth. The system has been applied to one of the sixteen 3 m diameter Microcel flotation columns at Peak Downs coal preparation plant in central Queensland. Results from the system to date show that it can successfully identify froth type and estimate average bubble size and froth speed. The machine vision system currently developed provides sufficient processing power to support minute by minute updates of these froth characteristics as well as a live video output to the screen. On-line predictions of percent ash and solids in the froth are well correlated with those obtained by laboratory analysis. The system is currently being linked to the Peak Downs plant PLC to allow a trial of closed loop control of flotation. 5 refs., 7 figs.

  1. Features Extraction of Flotation Froth Images and BP Neural Network Soft-Sensor Model of Concentrate Grade Optimized by Shuffled Cuckoo Searching Algorithm

    Directory of Open Access Journals (Sweden)

    Jie-sheng Wang

    2014-01-01

    Full Text Available For meeting the forecasting target of key technology indicators in the flotation process, a BP neural network soft-sensor model based on features extraction of flotation froth images and optimized by shuffled cuckoo search algorithm is proposed. Based on the digital image processing technique, the color features in HSI color space, the visual features based on the gray level cooccurrence matrix, and the shape characteristics based on the geometric theory of flotation froth images are extracted, respectively, as the input variables of the proposed soft-sensor model. Then the isometric mapping method is used to reduce the input dimension, the network size, and learning time of BP neural network. Finally, a shuffled cuckoo search algorithm is adopted to optimize the BP neural network soft-sensor model. Simulation results show that the model has better generalization results and prediction accuracy.

  2. Features extraction of flotation froth images and BP neural network soft-sensor model of concentrate grade optimized by shuffled cuckoo searching algorithm.

    Science.gov (United States)

    Wang, Jie-sheng; Han, Shuang; Shen, Na-na; Li, Shu-xia

    2014-01-01

    For meeting the forecasting target of key technology indicators in the flotation process, a BP neural network soft-sensor model based on features extraction of flotation froth images and optimized by shuffled cuckoo search algorithm is proposed. Based on the digital image processing technique, the color features in HSI color space, the visual features based on the gray level cooccurrence matrix, and the shape characteristics based on the geometric theory of flotation froth images are extracted, respectively, as the input variables of the proposed soft-sensor model. Then the isometric mapping method is used to reduce the input dimension, the network size, and learning time of BP neural network. Finally, a shuffled cuckoo search algorithm is adopted to optimize the BP neural network soft-sensor model. Simulation results show that the model has better generalization results and prediction accuracy.

  3. Performance Recognition for Sulphur Flotation Process Based on Froth Texture Unit Distribution

    Directory of Open Access Journals (Sweden)

    Mingfang He

    2013-01-01

    Full Text Available As an important indicator of flotation performance, froth texture is believed to be related to operational condition in sulphur flotation process. A novel fault detection method based on froth texture unit distribution (TUD is proposed to recognize the fault condition of sulphur flotation in real time. The froth texture unit number is calculated based on texture spectrum, and the probability density function (PDF of froth texture unit number is defined as texture unit distribution, which can describe the actual textual feature more accurately than the grey level dependence matrix approach. As the type of the froth TUD is unknown, a nonparametric kernel estimation method based on the fixed kernel basis is proposed, which can overcome the difficulty when comparing different TUDs under various conditions is impossible using the traditional varying kernel basis. Through transforming nonparametric description into dynamic kernel weight vectors, a principle component analysis (PCA model is established to reduce the dimensionality of the vectors. Then a threshold criterion determined by the TQ statistic based on the PCA model is proposed to realize the performance recognition. The industrial application results show that the accurate performance recognition of froth flotation can be achieved by using the proposed method.

  4. Separation and recovery of thermoplastics by froth floatation

    Energy Technology Data Exchange (ETDEWEB)

    Karvelas, D. E.; Jody, B. J.; Pomykala, J., Jr.; Daniels, E. J.

    1999-10-22

    This paper describes efforts by Argonne National Laboratory to develop a froth flotation process for separating and recovering plastics from mixed plastics waste streams generated from shredding obsolete appliances and automobiles. A process for recovering and separating equivalent-density ABS and HIPS from obsolete appliances was developed and pilot-tested with a through-put of 1,250 lbs/hr. The basic process is outlined; unit operations and equipment are discussed, and material balances are presented. The resulting ABS product was analyzed and its physical and mechanical properties were established. Its properties resembled those of virgin, mid-grade ABS that is commercially sold today and is widely used by the automotive industry. Injection-molding tests were also conducted by automotive-components suppliers, using the 100% recovered ABS. Headlamp back-cans and automotive ventilation-system duct components were injection molded and the results showed that the recovered ABS met the specifications for these applications. These results confirmed that the recovered ABS can be used as a substitute for virgin plastic materials for molding highly complex automotive component designs, and in parts for other durable goods. Economic analysis of a commercial-scale system was also performed using manufacturers' equipment quotes and operating data from the pilot plant, and it predicts a simple payback of less than 2 years for plants producing about 850 tons per year of ABS.

  5. Application of the hydrophile-lipophile balance concept to the classification of demulsifiers and bituminous froth and its components

    Energy Technology Data Exchange (ETDEWEB)

    Vander Kloet, Jana; Schramm, Laurier L.; Shelfantook, Bill [Chemistry Department, University of Calgary, Calgary, Alberta (Canada)

    2002-01-18

    The hydrophile-lipophile balance (HLB) was used to characterize several naphtha-diluted bituminous froth and bitumen phases, extracted froth components, and commercial demulsifiers used to resolve the froth emulsions. The requirements for emulsification of the diluted froth and bitumen phases could be classified by the HLB system in terms of required HLB values. Although such classification was not effective in detecting gross changes in the interfacial components of the diluted froth and bitumen phases, meaningful HLB values were obtained for the water soluble natural surfactants (HLB 16{+-}1) and asphaltenes (HLB 11{+-}1) isolated from the froth. The HLB values for three commercial demulsifiers were found to change depending on the delivery medium, from 12{+-}1 if the demulsifier was dissolved in naphtha to 7{+-}1 if the demulsifier was dissolved in water. This difference in apparent HLB may arise from differences in interfacially active components in the diluent. It appears that demulsifier components delivered in naphtha and the water-soluble natural surfactants will seek to form O/W emulsions and, therefore, act to destabilize the W/O froth emulsions. Conversely, demulsifier components delivered in water and naturally occurring asphaltenes will act to stabilize the W/O froth emulsions.

  6. A modified release analysis procedure using advanced froth flotation mechanisms. Final technical report, September 1, 1995--August 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Mohanty, M.K. [Southern Illinois Univ., Carbondale, IL (United States)

    1997-05-01

    Recent studies indicate that the optimum separation performances achieved by multiple stage cleaning using various column flotation technologies and single stage cleaning using a Packed-Flotation Column are superior to the performance achieved by the traditional release procedure, especially in terms of pyritic sulfur rejection. This superior performance is believed to be the result of the advanced flotation mechanisms provided by column flotation technologies. Thus, the objective of this study was to develop a suitable process utilizing the advanced froth flotation mechanisms to characterize the true flotation response of a coal sample. This investigation resulted in the development of a modified coal flotation characterization procedure, termed as the Advanced Flotation Washability (AFW) technique. The apparatus used for this procedure is a batch operated Packed-Column device which provides enhanced selectivity due to a plug-flow environment and a deep froth zone. The separation performance achieved by the AFW procedure was found to be superior to those produced by the conventional tree and release procedures for three nominally -100 mesh coal samples and two micronized samples. The largest difference in separation performance was obtained on the basis of product pyritic sulfur content. A comparison conducted between the AFW and the release procedures at an 80% recovery value showed that the AFW technique provided a 19% improvement in the reduction of pyritic sulfur. For an Illinois No. 5 coal sample, this improvement corresponded to a reduction in pyritic sulfur content from 1.38% to 0.70% or a total rejection of 66%. Micronization of the sample improved the pyritic sulfur rejection to 85% while rejecting 92% of the ash-bearing material. In addition, the separation performance provided by the AFW procedure was superior to that obtained from multiple cleaning stages using a continuous Packed-Column under both kinetic and carrying-capacity limiting conditions.

  7. Mitigating fouling in the high temperature paraffinic froth treatment process through science and serendipity

    Energy Technology Data Exchange (ETDEWEB)

    Chakrabarty, Tapantosh [Imperial Oil Resources (Canada)], email: apan.chakrabarty@esso.ca

    2010-07-01

    This work focuses on the application of high temperature paraffinic froth treatment (HT-PFT); a technique used to clean froth that results from the process of water extraction of oil sands. This technique includes the addition of a paraffinic solvent to the bitumen as a preliminary step in removing froth structures, leading to a possible fouling of the inner walls of the treatment vessels. Therefore, a fouling preventive technique consisting of three novel solutions was investigated in this work. The accumulations of fouling components were constantly monitored during the HT-PFT process using a gamma-ray densitometer. Results showed that buildups mostly consisted of inorganic solid structures held together with asphaltene. It was also shown that fluorocarbon polymer coating (FPC) proved to be the most effective additive in preventing fouling buildups, and by using fouling collectors in the vessels buildups were highly reduced downstream. In general, incorporating this preventive technique with HT-PFT was recommended.

  8. The influence of solvent and demulsifier additions on nascent froth formation during flotation recovery of Bitumen from Athabasca oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Stasiuk, E.N. [Chemistry Department, University of Calgary, Calgary, AB (Canada); Schramm, L.L. [Petroleum Recovery Institute, Alberta Research Council, 250 Karl Clark Road , T6N 1E4 Edmonton, AB (Canada)

    2001-10-25

    In the commercial slurry conditioning and flotation process applied to Athabasca oil sands the primary bituminous froth can contain significant amounts of emulsified water and suspended solids. Previous work [Fuel Process. Technol. 56 (1998) 243] has shown that a small chemical addition during the nascent froth process can yield froth of higher quality, without sacrificing bitumen recovery or increasing tight emulsion-forming tendency. In the present work we have investigated the addition of demulsifiers, mostly water-in-oil (W/O) emulsion breaking agents, in an attempt to encourage water droplet coalescence and separation from nascent froth. It was found that certain combinations of high HLB surfactants and solvents can be added in small amounts during the nascent froth process to cause significant reductions in froth water content without sacrificing bitumen recovery. The existence of an optimum surfactant concentration for such beneficial additives correlates with a minimum in interfacial tension and is consistent with conventional oilfield demulsifier experience. The application of our results could lead to a substantial increase in the throughput capacity of froth handling and treatment plants.

  9. Optimization of a laboratory-scale froth flotation process using response surface methodology

    Energy Technology Data Exchange (ETDEWEB)

    V.K. Kalyani; Pallavika; T. Gouri Charan; Sanjay Chaudhuri [Central Mining Research Institute, Dhanbad (India). IT Centre

    2005-09-01

    Froth flotation is a universally accepted process for the beneficiation of coal fines. However, the process variables, collector dosage, frother dosage, and pulp density need to be optimized for each coal. In the present work, response surface methodology has been applied for optimization of yield at a desired ash level. Using this technique, interaction, contours, and three-dimensional diagrams have been developed to observe the behavior of the independent variables as well as interaction of the variables. A three-dimensional diagram has also been developed to visualize the behavior of the desirability function. In this paper, attempts have been made to evaluate the performance of the froth flotation process using response surface methodology.

  10. Performance of classic oils and lubricating oils in froth flotation of Ukraine coal

    Energy Technology Data Exchange (ETDEWEB)

    Ibrahim Sonmez; Yakup Cebeci [Cumhuriyet University, Sivas (Turkey). Metallurgical and Materials Engineering Department, Engineering Faculty

    2006-09-15

    In this study, the appropriate collector and collector amount for Ukraine coal in froth flotation was determined. For this purpose, the performance of classic oils (kerosene, diesel-oil and fuel-oil) and lubricating oils (spindle oil, bright stock and heavy neutral) was evaluated by combustible recovery, ash rejection and efficiency index. It was found that the combustible recovery and ash rejection changed, depending on the type and concentration of oil. The maximum combustible recovery was obtained by using bright stock. It was determined that bright stock, fuel-oil and kerosene were suitable for the flotation of Ukraine coal. On considering the flotation efficiency index values, the best results were obtained with bright stock and diesel-oil. Consequently, it was shown that bright stock and spindle oil could be used as alternative oils instead of classic oils for cleaning of Ukraine coal by the froth flotation. 28 refs., 4 figs., 1 tab.

  11. Taguchi optimization: Case study of gold recovery from amalgamation tailing by using froth flotation method

    Science.gov (United States)

    Sudibyo, Aji, B. B.; Sumardi, S.; Mufakir, F. R.; Junaidi, A.; Nurjaman, F.; Karna, Aziza, Aulia

    2017-01-01

    Gold amalgamation process was widely used to treat gold ore. This process produces the tailing or amalgamation solid waste, which still contains gold at 8-9 ppm. Froth flotation is one of the promising methods to beneficiate gold from this tailing. However, this process requires optimal conditions which depends on the type of raw material. In this study, Taguchi method was used to optimize the optimum conditions of the froth flotation process. The Taguchi optimization shows that the gold recovery was strongly influenced by the particle size which is the best particle size at 150 mesh followed by the Potassium amyl xanthate concentration, pH and pine oil concentration at 1133.98, 4535.92 and 68.04 gr/ton amalgamation tailing, respectively.

  12. Separation of polyvinyl chloride (PVC) from automobile shredder residue (ASR) by froth flotation with ozonation

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, Mallampati Srinivasa [Department of Chemical Engineering, Graduate School of Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527 (Japan)]. E-mail: srireddys@hiroshima-u.ac.jp; Kurose, Keisuke [Department of Chemical Engineering, Graduate School of Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527 (Japan); Okuda, Tetsuji [Environmental Research and Management Center, Hiroshima University, 1-5-3 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8513 (Japan); Nishijima, Wataru [Environmental Research and Management Center, Hiroshima University, 1-5-3 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8513 (Japan); Okada, Mitsumasa [Department of Chemical Engineering, Graduate School of Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527 (Japan)

    2007-08-25

    The purpose of this study is to develop froth flotation to separate polyvinyl chloride (PVC) from automobile shredder residue (ASR) plastic mixtures of variable composition. Some polymers in ASR polymer mixtures have similar density and hydrophobicity with PVC and thus selective flotation of PVC from ASR polymer mixtures cannot be achieved. The present study focused on the surface modification of PVC with ozonation, and then the modified PVC can be separated from other polymers by the following froth flotation. The results of this study indicate that the selective recovery of PVC from real ASR polyethylene tetra pethelate (PET), polymethyl methacrylate (PMMA), polybutyl methacralate (PBMA), ethyl acrylate (EA), polycarbonate (PC) and rubber mixtures can be accomplished in a three-step process involving a gravity separation, ozonation and froth flotation. The rubber was removed from other heavy ASR (PVC, PET, PMMA, PBMA, EA and PC) polymers by froth flotation without mixing. It was found that ozonation process produced the desired difference in contact angle required (from 89.5 to 73.0{sup o}) for separation of PVC from other heavy ASR polymers, whereas the contact angles of other polymers was slightly decreased. The most of the load ASR, i.e. about 72.4% is floated away and 27.6% was settled down. The highest component 96.7% of PVC was recovered in the settled fraction. As a result of this research effort, the surface modification of PVC with ozonation can be efficiently useful to separate the PVC from other similar density ASR mixed polymers.

  13. Removal of methylene blue from its aqueous solution by froth flotation: hydrophobic silica nanoparticle as a collector

    Science.gov (United States)

    Hu, Nan; Liu, Wei; Ding, Linlin; Wu, Zhaoliang; Yin, Hao; Huang, Di; Li, Hongzhen; Jin, Lixue; Zheng, Huijie

    2017-02-01

    Dye pollution has been a severe problem faced by worldwide environmentalists. The use of nanoparticles as adsorbents has attracted widespread interests for effectively removing dyes, while the separation of them from an aqueous solution is a difficult and important subject. For achieving the simultaneous removal of methylene blue (MB) and nanoadsorbents, this work utilized a commercial hydrophobic silica nanoparticle (SNP) (200.0 ± 10.0 nm in average particle size) as a collector and then developed a novel froth flotation technology without using any surfactants. Under the suitable conditions of anhydrous ethanol dosage of 8 mL, pH of 9.0, SNP concentration of 600 mg/L, and flotation column height of 600 mm, the removal efficiencies of MB and SNPs and the volume ratio reached 91.1 ± 4.6%, 93.9 ± 4.7%, and 10.5 ± 0.5, respectively. Subsequently, the recovered MB-adsorbed SNPs in the foamate were separated by free setting due to their high concentration and massive agglomeration. After free setting, MB could be effectively separated from the recovered MB-adsorbed SNPs by using ethanol at pH 2.0 and repeating five cycles of washing-centrifugation. Additionally, the regenerated SNPs could be reused for removing MB up to five times. Overall, this work had a significant meaning for the treatment of dye-contaminated wastewaters.

  14. Identification and Modeling of Froth to Spray Transition on Sieve Trays

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The transition from froth to spray regime on sieve trays was experimentally studied in an air/water simulator with 300mm diameter. It has been found that the regime transition occurs as the clear liquid height is equal to the residual pressure drop on the trays. A convenient and accurate technique was proposed for determination of the regime transition point. Based on analysis of the transition process at a sieve hole, a new formula which can be used to correlate the experimental results was provided.

  15. A modified release analysis procedure using advanced froth flotation mechanisms: Technical report, March 1, 1996-May 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q., Mohanty, M.K. [Southern Illinois Univ., Department of Mining Engineering, Carbondale, IL (United States)

    1997-04-01

    Recent studies indicate that the optimum separation performances achieved by multiple stage cleaning using various column flotation technologies and single stage cleaning using a Packed-Flotation Column are superior to the performance achieved by the traditional release procedure, especially in terms of pyritic sulfur rejection. This superior performance is believed to be the result of the advanced flotation mechanisms provided by column flotation technologies. Thus, the objective of this study is to develop a suitable process utilizing the advanced froth flotation mechanisms to characterize the true flotation response of a coal sample. Work in this reporting period concentrated on developing a modified coal flotation characterization procedure, termed as Advanced Flotation Washability (AFW) technique. The new apparatus used for this procedure is essentially a batch operated packed-column device equipped with a controlled wash water system. Several experiments were conducted using the AFW technique on a relatively high sulfur, -100 mesh Illinois No. 5 run-of-mine coal sample collected from a local coal preparation plant. Similar coal characterization experiments were also conducted using the traditional release and tree analysis procedures. The best performance curve generated using the AFW technique was found to be superior to the optimum curve produced by the traditional procedures. For example, at a combustible recovery of 80%, a 19% improvement in the reduction of the pyritic sulfur content was achieved by the AFW method while the ash reduction was also enhanced by 4%. Several tests are on-going to solidify the AFW procedure and verify the above finding by conducting Anova analyses to evaluate the repeatability of the AFW method and the statistical significance of the difference in the performance achieved from the traditional and modified coal characterization procedures.

  16. Separation of polyethylene terephthalate from municipal waste plastics by froth flotation for recycling industry.

    Science.gov (United States)

    Wang, Chong-Qing; Wang, Hui; Liu, You-Nian

    2015-01-01

    Recycling is an effective way to manage plastic wastes and receives considerable attention. Since plastic mixtures are difficult to recycle because of their intrinsic characteristics, separation of mixed plastics is the key problem for recycling. Separation of polyethylene terephthalate (PET) from municipal waste plastics (MWP) by froth flotation combined with alkaline pretreatment was investigated for recycling industry. The effect of process variables was estimated by L9 (3(4)) orthogonal array of experiments and single factor experiments. The optimum conditions of alkaline pretreatment are 10 wt% sodium hydroxide, 20 min and 70°C. After alkaline pretreatment under optimum conditions, flotation separation PET from acrylonitrile-butadiene-styrene, polystyrene, polycarbonate or polyvinyl chloride was achieved with high purity and efficiency. The purity of PET is up to 98.46% and the recovery is above 92.47%. A flow sheet of separation PET from MWP by a combination of froth flotation and sink float separation was designed. This study facilitates industrial application of plastics flotation and provides technical insights into recycling of waste plastics. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Separation of polyethylene terephthalate from municipal waste plastics by froth flotation for recycling industry

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Chong-Qing; Wang, Hui, E-mail: huiwang1968@163.com; Liu, You-Nian

    2015-01-15

    Highlights: • Factors of NaOH treatment were studied by orthogonal and single factor experiments. • Mechanism of alkaline treatment for facilitating flotation was manifested. • Flotation separation of PET was achieved with high purity and efficiency. • A flow sheet of purification PET from MWP was designed. - Abstract: Recycling is an effective way to manage plastic wastes and receives considerable attention. Since plastic mixtures are difficult to recycle because of their intrinsic characteristics, separation of mixed plastics is the key problem for recycling. Separation of polyethylene terephthalate (PET) from municipal waste plastics (MWP) by froth flotation combined with alkaline pretreatment was investigated for recycling industry. The effect of process variables was estimated by L{sub 9} (3{sup 4}) orthogonal array of experiments and single factor experiments. The optimum conditions of alkaline pretreatment are 10 wt% sodium hydroxide, 20 min and 70 °C. After alkaline pretreatment under optimum conditions, flotation separation PET from acrylonitrile–butadiene–styrene, polystyrene, polycarbonate or polyvinyl chloride was achieved with high purity and efficiency. The purity of PET is up to 98.46% and the recovery is above 92.47%. A flow sheet of separation PET from MWP by a combination of froth flotation and sink float separation was designed. This study facilitates industrial application of plastics flotation and provides technical insights into recycling of waste plastics.

  18. Development of the Monolith Froth Reactor for Catalytic Wet Oxidation of CELSS Model Wastes

    Science.gov (United States)

    Abraham, Martin; Fisher, John W.

    1995-01-01

    The aqueous phase oxidation of acetic acid, used as a model compound for the treatment of CELSS (Controlled Ecological Life Support System) waste, was carried out in the monolith froth reactor which utilizes two-phase flow in the monolith channels. The catalytic oxidation of acetic acid was carried out over a Pt/Al2O3 catalyst, prepared at The University of Tulsa, at temperatures and pressures below the critical point of water. The effect of externally controllable parameters (temperature, liquid flow rate, distributor plate orifice size, pitch, and catalyst distance from the distributor plate) on the rate of acetic acid oxidation was investigated. Results indicate reaction rate increased with increasing temperature and exhibited a maximum with respect to liquid flow rate. The apparent activation energy calculated from reaction rate data was 99.7 kJ/mol. This value is similar to values reported for the oxidation of acetic acid in other systems and is comparable to intrinsic values calculated for oxidation reactions. The kinetic data were modeled using simple power law kinetics. The effect of "froth" feed system characteristics was also investigated. Results indicate that the reaction rate exhibits a maximum with respect to distributor plate orifice size, pitch, and catalyst distance from the distributor plate. Fundamental results obtained were used to extrapolate where the complete removal of acetic acid would be obtained and for the design and operation of a full scale CELSS treatment system.

  19. A Feasibility Study on ECT Monitoring of Froth Molding of Polyurethane

    Institute of Scientific and Technical Information of China (English)

    Qi CHEN; Shi LIU; Xiangyuan DONG

    2005-01-01

    This paper presents our recent experimental investigation on the feasibility of monitoring the froth molding, a special case of solidification process, of polyurethane by using electrical capacitance tomography. The major challenge is the extremely low solid density of the solidified material during the process due to the very large expansion ratio. Suitable calibration method is sought and adequate image reconstruction algorithm is applied for such a task. Different expansion modes have been observed during experiment and corresponding images reconstructed. This visualization technique clearly revealed the expansion process by a time series of images of the solid density. The test results proved the capability of electrical capacitance tomography in monitoring the expansion of polyurethane. Future ways for improvement are also suggested.

  20. Evaluation of biosurfactant obtained from Lactobacillus pentosus as foaming agent in froth flotation.

    Science.gov (United States)

    Vecino, X; Devesa-Rey, R; Cruz, J M; Moldes, A B

    2013-10-15

    This study analyzes the kinetics of sediment sorption on two chemical surfactants (Tween 20 and SDS) and a biotechnologically produced surfactant (obtained from Lactobacillus pentosus). Biosurfactants were produced by fermentation of hemicellulosic sugars from vineyard pruning waste supplied as a substrate to L. pentosus. Results obtained showed that almost no SDS was adsorbed onto the sediments, whereas Tween 20 and biosurfactants from L. pentosus were absorbed after a few minutes. Kinetic models revealed that adsorption of surfactant onto riverbed sediments is governed not only by an intra-particle diffusion model (evaluated by the Weber and Morris model), but also by surface reaction models (evaluated by first, second, third order equations and Elovich equation), showing the best fit when employing the Elovich model. The adsorption properties showed by biosurfactant from L. pentosus onto sediments present it as a potential foaming agent in froth flotation.

  1. Experiments of Suppressing Froth in Vanadium LeachingSolution%沉钒液泡沫的消除

    Institute of Scientific and Technical Information of China (English)

    王金超; 管英富; 曾志勇

    2000-01-01

    针对酸性铵盐沉钒工艺沉淀酸性铵盐过程中沉钒液内涌起泡沫影响正常操作等问题,考察了钒渣碱比、浸出液pH值、表面张力和沉钒上层液等影响因素,并提出了相应的改进措施.%During the process of acidic precipitation of ammonium polyvanadate,serious frothing in the vanadium-leaching solution causes trouble to thenormal operation. To maintain smooth operation, the reason of severefrothing was identified to be the excess of soda used in vanadiumcontaining slag roasting. On this basis, technical measures of carefulcontrol of slag-to-alkali ratio, acidity and surface tension of leachingsolution were proposed to suppress frothing and the normal operation ofprecipitating vanadium salt was realized successfully.

  2. Oil sands thickened froth treatment tailings exhibit acid rock drainage potential during evaporative drying.

    Science.gov (United States)

    Kuznetsov, Petr; Kuznetsova, Alsu; Foght, Julia M; Siddique, Tariq

    2015-02-01

    Bitumen extraction from oil sands ores after surface mining produces different tailings waste streams: 'froth treatment tailings' are enriched in pyrite relative to other streams. Tailings treatment can include addition of organic polymers to produce thickened tailings (TT). TT may be further de-watered by deposition into geotechnical cells for evaporative drying to increase shear strength prior to reclamation. To examine the acid rock drainage (ARD) potential of TT, we performed predictive analyses and laboratory experiments on material from field trials of two types of thickened froth treatment tailings (TT1 and TT2). Acid-base accounting (ABA) of initial samples showed that both TT1 and TT2 initially had net acid-producing potential, with ABA values of -141 and -230 t CaCO₃ equiv. 1000 t(-1) of TT, respectively. In long-term kinetic experiments, duplicate ~2-kg samples of TT were incubated in shallow trays and intermittently irrigated under air flow for 459 days to simulate evaporative field drying. Leachates collected from both TT samples initially had pH~6.8 that began decreasing after ~50 days (TT2) or ~250 days (TT1), stabilizing at pH~2. Correspondingly, the redox potential of leachates increased from 100-200 mV to 500-580 mV and electrical conductivity increased from 2-5 dS m(-1) to 26 dS m(-1), indicating dissolution of minerals during ARD. The rapid onset and prolonged ARD observed with TT2 is attributed to its greater pyrite (13.4%) and lower carbonate (1.4%) contents versus the slower onset of ARD in TT1 (initially 6.0% pyrite and 2.5% carbonates). 16S rRNA gene pyrosequencing analysis revealed rapid shift in microbial community when conditions became strongly acidic (pH~2) favoring the enrichment of Acidithiobacillus and Sulfobacillus bacteria in TT. This is the first report showing ARD potential of TT and the results have significant implications for effective management of pyrite-enriched oil sands tailings streams/deposits. Copyright © 2014

  3. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The construction of the DOE POC at the OCDO facility continued through this entire quarter. By the end of the quarter approximately 90% of all of the construction had been completed. All equipment has beeninstalled, checked for mechanical and installation and operated from a local pushbutton. During this quarter a review of items to be completed for start-up was compiled. This information was then presented to the construction subcontractors and agreement was concluded that all items will be completed and operational for processing coal by February 1, 1993. There are still several items that were not on site for installation during this quarter. These items are the flocculant controls supplied by Westec Engineering, Inc., and the discharge valve for the hyperbaric filter supplied by KHD. Neither of these items will prevent start-up. The flocculants can be manually controlled and provisions are all ready provided to bypass the hyperbaric filter to the Sharpels high-G centrifuge. Both of these items are scheduled for delivery in mid-January.

  4. Effect of particle size on the froth floatation of Sokoto phosphate ore

    Directory of Open Access Journals (Sweden)

    U.A. Hassan

    2016-06-01

    Full Text Available Effect of particle size on the froth floatation of Sokoto phosphate ore for its beneficiation has been investigated and established. The research has been conducted using various reagents, pH(s at different sieve size fractions. Bench scale flotation tests were carried out on -250+180μm, -180+106μm, -106+75μm, -75+45μm and -45+38μm particle size fractions after screening in order to determine the optimum flotation feed size distribution using 1 liter Denver flotation cell. The results of the scoping flotation studies using a conditioning Pulp Density of 60%Solids, pH9, 800g/t reagent dosage for AERO704 Promoter (Fatty Acid and flotation pulp density of 28.5% Solids show that +106μm particle size gave the highest assay content of 20.4% P2O5 with a recovery of 76.2% compared to +38μm (19.9%P2O5 and recovery of 43.2% and +180μm (19.4%P2O5 and 24.1% recovery in their floats (concentrates but with no perfect separation as the tailings fraction also contained similar grades with slight differences.

  5. Kinetic approach to the study of froth flotation applied to a lepidolite ore

    Institute of Scientific and Technical Information of China (English)

    Nathlia Vieceli; Fernando O Duro; Carlos Guimares; Carlos A Nogueira; Manuel F C Pereira; Fernanda Margarido

    2016-01-01

    The number of published studies related to the optimization of lithium extraction from low-grade ores has increased as the demand for lithium has grown. However, no study related to the kinetics of the concentration stage of lithium-containing minerals by froth flotation has yet been reported. To establish a factorial design of batch flotation experiments, we conducted a set of kinetic tests to determine the most selective alternative collector, define a range of pulp pH values, and estimate a near-optimum flotation time. Both collectors (Aeromine 3000C and Armeen 12D) provided the required flotation selectivity, although this selectivity was lost in the case of pulp pH values outside the range between 2 and 4. Cumulative mineral recovery curves were used to adjust a classical kinetic model that was modified with a non-negative parameter representing a delay time. The computation of the near-optimum flotation time as the maximizer of a separation effi-ciency (SE) function must be performed with caution. We instead propose to define the near-optimum flotation time as the time interval re-quired to achieve 95%–99% of the maximum value of the SE function.

  6. Combining ZnO/microwave treatment for changing wettability of WEEE styrene plastics (ABS and HIPS) and their selective separation by froth flotation

    Science.gov (United States)

    Thanh Truc, Nguyen Thi; Lee, Byeong-Kyu

    2017-10-01

    This study reports a simple froth flotation method to separate plastic wastes of acrylonitrile-butadiene-styrene (ABS) and high impact polystyrene (HIPS) after initial hydrophilization by coating the plastics with ZnO and microwave treatment. ABS and HIPS are typical styrene-based WEEE plastics having similar density and hydrophobicity, which hinders their separation for recycling. After coating with ZnO, 2-min microwave treatment rearranged the ABS surface and thus changed its molecular mobility and increased its hydrophilicity. The combined ZnO coating/microwave treatment facilitated the selective separation of ABS and HIPS with 100% and 95.2% recovery and 95.4% and 100% purity in froth flotation, respectively. The combination of ZnO coating-microwave treatment and froth flotation can be utilized as a selective ABS/HIPS separation technique for improved recycling of WEEE plastics.

  7. Trace metal mobilization from oil sands froth treatment thickened tailings exhibiting acid rock drainage.

    Science.gov (United States)

    Kuznetsova, Alsu; Kuznetsov, Petr; Foght, Julia M; Siddique, Tariq

    2016-11-15

    Froth treatment thickened tailings (TT) are a waste product of bitumen extraction from surface-mined oil sands ores. When incubated in a laboratory under simulated moist oxic environmental conditions for ~450d, two different types of TT (TT1 and TT2) exhibited the potential to generate acid rock drainage (ARD) by producing acid leachate after 250 and 50d, respectively. We report here the release of toxic metals from TT via ARD, which could pose an environmental threat if oil sands TT deposits are not properly managed. Trace metal concentrations in leachate samples collected periodically revealed that Mn and Sr were released immediately even before the onset of ARD. Spikes in Co and Ni concentrations were observed both pre-ARD and during active ARD, particularly in TT1. For most elements measured (Fe, Cr, V, As, Cu, Pb, Zn, Cd, and Se), leaching was associated with ARD production. Though equivalent acidification (pH2) was achieved in leachate from both TT types, greater metal release was observed from TT2 where concentrations reached 10,000ppb for Ni, 5000ppb for Co, 3000ppb for As, 2000ppb for V, and 1000ppb for Cr. Generally, metal concentrations decreased in leachate with time during ARD and became negligible by the end of incubation (~450d) despite appreciable metals remaining in the leached TT. These results suggest that using TT for land reclamation purposes or surface deposition for volume reduction may unfavorably impact the environment, and warrants application of appropriate strategies for management of pyrite-enriched oil sands tailings streams.

  8. Three-phase gas-liquid-solid foaming bubble reactors and self-lubricated transport of bitumen froth

    Science.gov (United States)

    Mata, Clara E.

    Two distinct topics in multi-phase flow of interest of the oil industry are considered in this thesis. Studies of three-phase gas-liquid-solid foaming bubble reactors and self-lubricated transport of bitumen froth are reported. Applications of foams and foaming are found in many industrial processes such as flotation of minerals, enhanced oil recovery, drilling in oil reservoirs, and refining processes. However the physics of foaming and defoaming are not fully understood. Foams trap gas and are not desirable in some processes such as oil refining. Previously, it has been found that foaming may be strongly suppressed in a cold slit bubble reactor by fluidizing hydrophilic particles in the bubbly mixture below the foam. In this work, we fluidized hydrophobic and hydrophilic versions of two different sands in a cold slit foaming bubble reactor. We found that the hydrophobic sands suppress the foam substantially better than their hydrophilic counterparts. To study the capacity of foams to carry particles, we built a new slit foaming bubble reactor, which can be continuously fed with solid particles. Global gas, liquid, and solid holdups were measured for given gas and liquid velocities and solid flow rates. This research provides the fundamental ground work for the identification of flow types in a slit three-phase foaming bubble reactor with continuous injection of particles. Bitumen froth is produced from the oil sands of Athabasca, Canada. When transported in a pipeline, water present in the froth is released in regions of high shear (at the pipe wall). This results in a lubricating layer of water that allows bitumen froth pumping at greatly reduced pressures and hence the potential for savings in pumping energy consumption. Experimental results establishing the features of this self lubrication phenomenon are presented. The pressure gradient of lubricated flows closely follow the empirical law of Blasius for turbulent pipe flow with a constant of proportionality

  9. Development of hydrophobicity and selective separation of hazardous chlorinated plastics by mild heat treatment after PAC coating and froth flotation.

    Science.gov (United States)

    Thanh Truc, Nguyen Thi; Lee, Chi-Hyeon; Lee, Byeong-Kyu; Mallampati, Srinivasa Reddy

    2017-01-05

    Polyvinyl chloride (PVC) containing chlorine can release highly toxic materials and persistent organic pollutants if improperly disposed of. The combined technique of powder activated carbon (PAC) coating and mild heat treatment has been found to selectively change the surface hydrophobicity of PVC, enhancing its wettability and thereby promoting its separation from heavy plastic mixtures included polycarbonate (PC), polymethyl methacrylate (PMMA), polystyrene (PS) and acrylonitrile butadiene styrene (ABS) by means of froth flotation. The combined treatments helped to rearrange the surface components and make PVC more hydrophobic, while the remaining plastics became more hydrophilic. After the treatments at 150°C for 80s the contact angle of the PVC was greatly increased from 90.5 to 97.9°. The SEM and AFM reveal that the surface morphology and roughness changes on the PVC surface. XPS and FT-IR results further confirmed an increase of hydrophobic functional groups on the PVC surface. At the optimized froth flotation and subsequent mixing at 150rpm, 100% of PVC was recovered from the remaining plastic mixture with 93.8% purity. The combined technique can provide a simple and effective method for the selective separation of PVC from heavy plastics mixtures to facilitate easy industrial recycling.

  10. The Latest Developments in Froth Flotation Separation Method%泡沫浮选分离法的最新发展动态

    Institute of Scientific and Technical Information of China (English)

    韩春雨; 李雅静; 展何伟

    2014-01-01

    泡沫分离是根据吸附的原理,向含表面活性物质的液体中鼓泡,使液体内的表面活性物质聚集在气液界面上,在液体主体上方形成泡沫层,将泡沫层和液相主体分开,就可以达到浓缩表面活性物质和净化液相主体的目的。泡沫分离是以气泡作分离介质来浓集表面活性物质的一种新型分离技术。本文注重介绍了泡沫浮选分离法的发展历史及其发展状况,另外也论述了其最新的发展动态,以及其优缺点。%Foam separation was based on the principle of adsorption , the bubble in the liquid containing the surface active substance, made the surface active substance inside the liquid gathered at the gas-liquid interface, forming foam layer above the liquid body , separate foam layer and the liquid body , which can achieve enrichment surface active material and the purpose of purifying liquid body.Foam separation was bubbles as separation medium concentration surface active material to a new kind of separation technology.The development history of froth flotation separation and its development were focused on, its latest developments, as well as their advantages and disadvantages were also discussed.

  11. SURFACTANT SPRAY: A NOVEL TECHNOLOGY TO IMPROVE FLOTATION DEINKING PERFORMANCE

    Energy Technology Data Exchange (ETDEWEB)

    Yulin Deng; Junyong Zhu

    2004-01-31

    Based on the fundamental understanding of ink removal and fiber loss mechanism in flotation deinking process, we developed this innovative technology using surfactant spray to improve the ink removal efficiency, reduce the water and fiber loss, reduce the chemical consumption and carry over in the flotation deinking. The innovative flotation deinking process uses a spray to deliver the frothing agent during flotation deinking to control several key process variables. The spray can control the foam stability and structure and modify the fluid dynamics to reduce the fibers entrapped in the froth layer. The froth formed at the top part of the flotation column will act as a physical filter to prevent the penetration of frothing agent into the pulp suspension to eliminate fiber contamination and unfavorable deinking surface chemistry modification due to surfactant adsorption on the fiber surface. Because of the filter effect, frothing agents will be better utilized. Under the sponsorships of the US Dept. of Energy (DOE) and the member companies of the Institute of Paper Science and Technology, we studied the chem-mechanical mechanism of surfactant spray for flotation deinking using different furnishes, chemicals, and flotation devices in the past four years. In the final year of the project, we successfully conducted mill trials at Abitibi-Consolidated, Inc., Snowflake paper recycling operation of 100% mixture of ONP/OMG. Results from laboratory, pilot-plant and mill trials indicated that surfactant spray technology can significantly reduce fiber loss in flotation deinking. It can be concluded that paper industry can profit greatly when this technology is commercialized in flotation deinking mills.

  12. Hybrid selective surface hydrophilization and froth flotation separation of hazardous chlorinated plastics from E-waste with novel nanoscale metallic calcium composite.

    Science.gov (United States)

    Mallampati, Srinivasa Reddy; Heo, Je Haeng; Park, Min Hee

    2016-04-05

    Treatment by a nanometallic Ca/CaO composite has been found to selectively hydrophilize the surface of polyvinyl chloride (PVC), enhancing its wettability and thereby promoting its separation from E-waste plastics by means of froth flotation. The treatment considerably decreased the water contact angle of PVC, by about 18°. The SEM images of the PVC plastic after treatment displayed significant changes in their surface morphology compared to other plastics. The SEM-EDS results reveal that a markedly decrease of [Cl] concentration simultaneously with dramatic increase of [O] on the surface of the PCV samples. XPS results further confirmed an increase of hydrophilic functional groups on the PVC surface. Froth flotation at 100rpm mixing speed was found to be optimal, separating 100% of the PVC into a settled fraction of 96.4% purity even when the plastics fed into the reactor were of nonuniform size and shape. The total recovery of PVC-free plastics in E-waste reached nearly 100% in the floated fraction, significantly improved from the 20.5wt% of light plastics that can be recovered by means of conventional wet gravity separation. The hybrid method of nanometallic Ca/CaO treatment and froth flotation is effective in the separation of hazardous chlorinated plastics from E-waste plastics. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. EFFECTS OF RE-ROUTING OF CONCENTRATE STREAMS IN THE INDUSTRIAL SCALE FROTH FLOTATION OF LOWER GROUP 6 PGM ORE

    Directory of Open Access Journals (Sweden)

    EMMANUEL M. SHAI

    2016-12-01

    Full Text Available The Lower Group 6 (LG6 platinum group of metals (PGM ore was subjected to batch and continuous industrial froth flotation with and without concentrate streams re-routing. The batch test indicated that the ore has a recovery of about 69%.However, the average PGM recovery before and after rougher stage rerouting during plant scale tests were 41.5 and 64.5%, respectively. The rerouting of roughers 4 to 6 streams thus successfully improved recovery by 23%.Similar results were also obtained for both PGM and PGM 4E recoveries in both cleaner and re-cleaner stages re-routing. The results obtained thus strongly suggest that the circuit PGM recovery was optimized by the re-routing. It was however further observed that the PGM grade decreased significantly while the chromium content of oxide origin increased in the concentrates after re-routing. The optimum grade and recovery combination for each metal value will thus have to be determined by the plant based on the Net Smelter Return (NSR analyses that incorporate both grade and recovery results.

  14. Separation of polycarbonate and acrylonitrile-butadiene-styrene waste plastics by froth flotation combined with ammonia pretreatment.

    Science.gov (United States)

    Wang, Chong-Qing; Wang, Hui; Liu, Qun; Fu, Jian-Gang; Liu, You-Nian

    2014-12-01

    The objective of this research is flotation separation of polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS) waste plastics combined with ammonia pretreatment. The PC and ABS plastics show similar hydrophobicity, and ammonia treatment changes selectively floatability of PC plastic while ABS is insensitive to ammonia treatment. The contact angle measurement indicates the dropping of flotation recovery of PC is ascribed to a decline of contact angle. X-ray photoelectron spectroscopy demonstrates reactions occur on PC surface, which makes PC surface more hydrophilic. Separation of PC and ABS waste plastics was conducted based on the flotation behavior of single plastic. At different temperatures, PC and ABS mixtures were separated efficiently through froth flotation with ammonia pretreatment for different time (13 min at 23 °C, 18 min at 18 °C and 30 min at 23 °C). For both PC and ABS, the purity and recovery is more than 95.31% and 95.35%, respectively; the purity of PC and ABS is up to 99.72% and 99.23%, respectively. PC and ABS mixtures with different particle sizes were separated effectively, implying that ammonia treatment possesses superior applicability. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Investigation of thermal treatment on selective separation of post consumer plastics prior to froth flotation.

    Science.gov (United States)

    Guney, Ali; Poyraz, M Ibrahim; Kangal, Olgac; Burat, Firat

    2013-09-01

    Plastics have become the widely used materials because of their advantages, such as cheapness, endurance, lightness, and hygiene. However, they cause waste and soil pollution and they do not easily decompose. Many promising technologies are being investigated for separating mixed thermoplastics, but they are still uneconomical and unreliable. Depending on their surface characteristics, these plastics can be separated from each other by flotation method which is useful mineral processing technique with its low cost and simplicity. The main objective of this study is to investigate the flotation characteristics of PET and PVC and determine the effect of plasticizer reagents on efficient plastic separation. For that purpose, various parameters such as pH, plasticizer concentration, plasticizer type, conditioning temperature and thermal conditioning were investigated. As a result, PET particles were floated with 95.1% purity and 65.3% efficiency while PVC particles were obtained with 98.1% purity and 65.3% efficiency.

  16. Creating value from waste: remediation of froth treatment tailings from oil sands mining operations

    Energy Technology Data Exchange (ETDEWEB)

    Moran, Kevin [Titanium Corporation (Canada); Burdenie, B. [SNC-LAVALIN (Canada)

    2011-07-01

    As the world reserves of oil are depleting, most of the remaining oil is heavy oil from oil sands. Several methods based on water and solvent usage are used to recover this oil but they lead to the rejection of valuable compounds into tailings: heavy minerals, residual bitumen, water and solvent. The aim of this paper is to present the research and development program carried out by Titanium Corporation Inc., of Canada, to recover these compounds in Alberta. Pilot projects were conducted to test the developed technologies. Results showed performance meeting or exceeding expectations as well as a numerous environmental benefits including a significant reduction in water imports and emissions of CO2, NOx and volatile organic compounds. .

  17. Investigation of thermal treatment on selective separation of post consumer plastics prior to froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    Guney, Ali; Poyraz, M. Ibrahim; Kangal, Olgac, E-mail: kangal@itu.edu.tr; Burat, Firat

    2013-09-15

    Highlights: • Both PET and PVC have nearly the same densities. • The best pH value will be 4 for optimizing pH values. • Malic acid gave the best results for selective separation of PET and PVC. - Abstract: Plastics have become the widely used materials because of their advantages, such as cheapness, endurance, lightness, and hygiene. However, they cause waste and soil pollution and they do not easily decompose. Many promising technologies are being investigated for separating mixed thermoplastics, but they are still uneconomical and unreliable. Depending on their surface characteristics, these plastics can be separated from each other by flotation method which is useful mineral processing technique with its low cost and simplicity. The main objective of this study is to investigate the flotation characteristics of PET and PVC and determine the effect of plasticizer reagents on efficient plastic separation. For that purpose, various parameters such as pH, plasticizer concentration, plasticizer type, conditioning temperature and thermal conditioning were investigated. As a result, PET particles were floated with 95.1% purity and 65.3% efficiency while PVC particles were obtained with 98.1% purity and 65.3% efficiency.

  18. Proceedings of the 45. annual conference of metallurgists of CIM : interfacial phenomena in fine particle technology : the 6. UBC-McGill-UA international symposium on fundamentals of mineral processing in honor of Professor Janusz S. Laskowski

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Z.; Liu, Q. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical and Materials Engineering] (eds.)

    2006-07-01

    This conference, organized by the Mineral Sciences and Engineering Section of the Metallurgical Society of CIM acknowledged that strong economic growth is the driving force behind record high productivity in the mining industry. The industry must strive to meet the higher demand for raw materials while facing the challenge of stringent environmental constraints. The continuing success of the mining industry will depend on efficient and environmentally sound mineral processing, particularly since the industry has been forced to exploit more complex forms of minerals given the gradual depletion of high-grade mineral resources. In addition to shortages in qualified personnel in mineral processing, the industry is currently facing a general reduction in basic research and training programs, resulting in deficiencies in technologies needed to process complex ores. World experts in mineral processing participated at this conference to share their novel research in fine particle processing, applications of atomic force microscopy, flotation research, particle interactions in mineral processing, flotation froths, grinding, rheology and sulphide flotation chemistry. The sessions of the conference were entitled: atomic force microscopy in flotation research particulate interactions; flotation froths, flocculation and dewatering; grinding and rheology surfactants; flotation froths, particle-bubble interactions; sulphide flotation; and, general flotation froths. The conference featured 37 presentations, of which 6 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  19. 数据驱动的锑粗选泡沫图像特征优化设定%Data-driven optimal setting for froth image features of stibium rougher flotation

    Institute of Scientific and Technical Information of China (English)

    吴佳; 谢永芳; 阳春华; 桂卫华

    2016-01-01

    针对锑浮选过程中精、尾矿品位难以在线检测,浮选性能不稳定的问题,提出一种数据驱动的泡沫图像特征优化设定方法。该方法根据入矿品位类型对泡沫图像特征进行优化设定,并针对不同入矿品位类型的样本分布特点,先尝试采用案例推理的方法从历史数据中寻找浮选性能优良的泡沫状态。若经验知识不足,则采用基于多中心模糊C均值聚类与概率支持向量回归的区间II型模糊系统建模方法建立精、尾矿品位指标模型,并在此基础上利用智能优化方法寻优泡沫图像特征值。某锑浮选工业实验结果表明了所提出方法的有效性。%Due to the difficulties of measuring concentrate and tailing grade online and unstability of the flotation performance, a data-driven optimal setting for froth image features is proposed. The froth image features are optimal set according to the type of feed ore grade. Considering the distribution nature of samples of each feed grade type, it is tried to use case-based reasoning method for obtaining the froth status with optimal flotation performance from history data. When lack of enough experiential knowledge, the interval type II fuzzy system modeling method based on the multi-centers fuzzy C-means clustering and probabilistic support vector regress method is adopted to build the concentrate and tailing grade model. Then intelligent optimization algorithm is applied to search the optimal values for the froth image features. The application to the stibium flotation process shows the effectiveness of the proposed method.

  20. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation. Quarterly technical progress report No. 17, August 1, 1992--December 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    The construction of the DOE POC at the OCDO facility continued through this entire quarter. By the end of the quarter approximately 90% of all of the construction had been completed. All equipment has beeninstalled, checked for mechanical and installation and operated from a local pushbutton. During this quarter a review of items to be completed for start-up was compiled. This information was then presented to the construction subcontractors and agreement was concluded that all items will be completed and operational for processing coal by February 1, 1993. There are still several items that were not on site for installation during this quarter. These items are the flocculant controls supplied by Westec Engineering, Inc., and the discharge valve for the hyperbaric filter supplied by KHD. Neither of these items will prevent start-up. The flocculants can be manually controlled and provisions are all ready provided to bypass the hyperbaric filter to the Sharpels high-G centrifuge. Both of these items are scheduled for delivery in mid-January.

  1. Separation of unburned carbon from coal fly ash through froth flotation; Sekitanbai no shisshiki datsutanso gijutsu kaihatsu shiken

    Energy Technology Data Exchange (ETDEWEB)

    Miwa, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Murakami, T. [The Coal Mining Research Center, Japan, Tokyo (Japan)

    1996-09-01

    Coal ash tends to become containing more unburned carbon and porous substances depending on conditions of combustion, whose adverse effects to products due to water adsorbability, absorbability and color tones create obstacles in its utilization. Therefore, research and development works have been progressed on wet type carbon removing technology which is characterized in that coal is pulverized to preferable degrees and subjected to flotation. This paper reports the results obtained during fiscal 1995. The results may be summarized as follows: as a result of the comparison test on a column flotation machine and an FW type flotation machine of machine stirring type, the former machine showed better flotation efficiency; several methods were investigated on crushing as a treatment prior to flotation, whereas a mixer with greater circumferential speed and a homo mixer showed the highest efficiency; strength of the impact to the flotation efficiency was found to decrease in the order of pulp concentration > pretreatment time > collector addition ratio; and as a result of the evaluation on refined ash as a cement admixture and carbons as fuel, possibilities were found in them for practical application. 16 figs., 2 tabs.

  2. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  3. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  4. A broth-froth recovery seperator application in avermectins production by Streptomyces avermitilis%阻沬回收分离器在阿维菌素发酵中的应用

    Institute of Scientific and Technical Information of China (English)

    武威; 杨励; 郭美锦

    2011-01-01

    Objective To apply a novel broth-froth recovery separator (BFRS) in agro-antibiotic avermectins production by Streptomyces avermitilis on an industrial scale. Method A novel broth-froth recovery seperator,which was made based on the principle of foam cyclone separation coupling with exhauset gas recycling, was introduced in avermectins fermentation. Results The working capacity was significantly increased by 22.47%from 65% (control) up to 80%, resulting in a higher utilization efficiency for the productive fermenter. Also, the total avermectin yield per batch of the fermenter coupling with BFRS was enhanced by 20.54% than the mean monthly avermectin yield per batch obtained without BFRS application. Regarding the exhaust gas recycling performance of the BFRS, 9%~10% of the outlet gas could be reused during avermectin fermentation process, resulting in a significant reduction of total outlet gas emission and of pollutants produced by S. avermitilis cultured in a 120M3 fermenter.Conclusion The BFRS can remarkably enhance the fermenter's working capacity, and it can be applied in other bioproduct production with a similar broth's characterization.%目的:研究一种新型阻沫回收分离器在农用抗生素阿维菌素工业发酵生产中的应用.方法:阿维菌素发酵过程中,应用一种基于泡沫旋风分离与发酵尾气再回收相结合原理的新型阻沫回收分离器.结果:放罐系数由原来月平均的65%提高至80%左右,体积增加率为22.47%,显著提高了发酵罐的利用率;单位罐产量(总亿)比月平均单罐产量提高了20.54%;在发酵过程尾气回收方面,每罐批比对照罐能回收利用9%-10%的排放尾气,减少了发酵污染物的排放.结论:这种新型阻沫回收分离器可显著提高阿维菌素发酵过程中的放罐系数,还可能应用到其它发酵液性能相似的生物发酵产品.

  5. Predictive control of slurry pH based on froth characteristics for antimony flotation process%基于图像特征的锑浮选矿浆pH值预测控制

    Institute of Scientific and Technical Information of China (English)

    王晓丽; 曾子骄; 黄蕾; 谢永芳; 阳春华

    2016-01-01

    A suitable pH value of the slurry is the key for efficient froth flotation. In the industrial process, it is difficult to measure the pH value online, which causes the control delay. To solve this problem, pH-associated sensitive image features of the froth are obtained, and a soft sensor model-multi-model least squares support vector machine(LSSVM) based on affinity propagation clustering(AP) is introduced. Then, a predictive control strategy based on online support vector regression(OSVR) and differential evolution(DE) optimization for the pH is proposed. The prediction model is built offline and corrected online, and a DE optimization method is used to solve the predictive control problem to find the optimal decision variables, so as to achieve the real-time control of the slurry pH value. The industrial test results in antimony flotation show that the proposed control strategy can stabilize the pH value, and reduce the chemical consumption.%适宜的矿浆pH值是泡沫浮选高效生产的关键。针对浮选矿浆pH值无法在线检测和控制滞后的问题,提取pH关联泡沫表面敏感特征,建立基于仿射传播聚类的多模型最小二乘支持向量机软测量模型,提出一种基于差分进化的在线支持向量回归pH值预测控制方法,离线建立和在线校正pH值预测模型,采用基于差分进化优化方法求解预测控制决策变量,从而实现pH值实时控制。金锑浮选工业数据表明,所提出的控制策略稳定了矿浆pH值,减少了药剂消耗。

  6. Heterogeneous nano-Fe/Ca/CaO catalytic ozonation for selective surface hydrophilization of plastics containing brominated and chlorinated flame retardants (B/CFRs): separation from automobile shredder residue by froth flotation.

    Science.gov (United States)

    Mallampati, Srinivasa Reddy; Lee, Byoung Ho; Mitoma, Yoshiharu; Simion, Cristian

    2016-12-09

    One method of weakening the inherently hydrophobic surface of plastics relevant to flotation separation is heterogeneous nano-Fe/Ca/CaO catalytic ozonation. Nano-Fe/Ca/CaO-catalyzed ozonation for 15 min efficiently decreases the surface hydrophobicity of brominated and chlorinated flame retardant (B/CFR)-containing plastics (such as acrylonitrile-butadienestyrene (ABS), high-impact polystyrene (HIPS), and polyvinyl chloride (PVC)) in automobile shredder residue (ASR) to such an extent that their flotation ability is entirely depressed. Such a hydrophilization treatment also stimulates the ABS, HIPS, and PVC surface roughness, wetting of the surface, and the thermodynamic equilibrium conditions at the surface and ultimately changes surface polarity. SEM-EDS, AFM, and XPS analyses of the PVC and ABS surfaces demonstrated a marked decrease in [Cl/Br] and a significant increase in the number of hydrophilic groups, such as C-O, C=O, and (C=O)-O. Under froth flotation conditions at 50 rpm, about 99.5 % of ABS and 99.5 % of HIPS in ASR samples settled out, resulting in a purity of 98 and 98.5 % for ABS and HIPS in ASR samples, respectively. Furthermore, at 150 rpm, we also obtained 100 % PVC separation in the settled fraction, with 98 % purity in ASR. Total recovery of non-B/CFR-containing plastics reached nearly 100 % in the floating fraction. The amount of nano-Fe/Ca/CaO reagent employed during ozonation is very small, and additional removal of surface contaminants from the recycled ASR plastic surfaces by ozonation makes the developed process simpler, greener, and more effective.

  7. Performance recognition using texture credit distributed SVM for froth flotation process%基于泡沫纹理信度分配SVM的矿物浮选工况识别

    Institute of Scientific and Technical Information of China (English)

    阳春华; 任会峰; 桂卫华; 鄢锋; 唐朝晖

    2011-01-01

    A performance recognition method for mineral froth flotation process is presented, where multiple imbalance exists in texture directions, feature credit and sample distribution. Firstly, second order statistics such as angular second moment, entropy, moment of inertia, moment of deficit and relevance are extracted based on four-direction fused spatial gray co-occurrence matrix to avoid the adverse effects of directions. Then information entropy is introduced to evaluate the feature credit of the texture features via the information gains. Furthermore, the imbalance of sample distribution is eliminated with between-class weighted strategy, and a performance recognition model is established using one-versus-one weighted support vector machine (OVO-WSVM). Industrial on-site experiment verifies that the proposed method can decrease the misclassification rate of small samples and increase overall recognition rate.%针对矿物浮选过程中泡沫纹理各向异性、纹理特征信度差异以及类间样本数分布不均等问题,提出一种浮选工况的自动识别方法.首先基于多角度融合的空间灰度共生矩阵计算角二阶矩、熵、惯性矩、逆差矩和相关性等二阶统计量描述泡沫纹理特征,然后引入信息熵的概念,以二阶统计量的信息增益分配各种纹理特征对分类器的信度,再通过类间样本数加权策略消除样本分布的不平衡性,最后实现了一对一加权支持向量机的浮选工况识别.工业现场泡沫图像测试结果表明,该方法能够有效降低小样本的错分率,提高整体识别率.

  8. A comparison study of column flotation technologies for cleaning Illinois coal. Final technical report, September 1, 1993--November 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Paul, B.C.

    1994-12-31

    Six commercially-available column technologies were compared on the basis of their separation performance, throughput capacity and operational characteristics for treating Illinois Basin coal fines. The flotation column technologies included in this study were the Jameson Cell, Flotaire, Turboair, Packed-Column, Microcel and the Canadian Column. The coal samples treated in this study were a {minus}100 mesh flotation feed slurry, a {minus}40 mesh coal, and a refuse pond coal sample. This investigation found that the Packed Column, Jameson Cell, and Microcel are the best flotation columns for cleaning the Illinois Basin coals treated in this study. The Packed-Column was found to provide superior selectivity, although requiring the highest amount of air and frother concentration. The superior performance is believed to be related to the extensive reflux action and selective detachment mechanism that are more prevalent in the Packed-Column due to its unique ability to support a full froth column. Among the conventional open columns, the Microcel provided the best selectivity, most likely due to its lower aeration requirement which results in a more plug-flow environment within the cell. Both the Packed-Column and the Microcel appeared to have nearly equal throughput capacities. The Jameson Cell, which also has a relatively high throughput capacity, was found to require the least amount of frother while supplying a self-inducing air system. Another important finding of this investigation is that the traditional release analysis procedure is inadequate for predicting the optimum performance of advanced froth flotation processes and, thus, requires further investigation.

  9. 6th Conference on Coal Utilization Technology; Dai 6 kai sekitan riyo gijutsu kaigi koenshu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The paper compiled the papers presented in the 6th Conference on Coal Utilization Technology held in September 1996. With relation to the fluidized bed boiler, reported were Field operation test of Wakamatsu PFBC combined cycle power plant and Development of pressurized internally circulating fluidized bed combustion technology. Regarding the coal reformation, Development of advanced coal cleaning process, Coal preparation and coal cleaning in the dry process, etc. Concerning the combustion technology, Study of the O2/CO2 combustion technology, Development of pressurized coal partial combustor, etc. About the CWM, Development of low rank coals upgrading and their CWM producing technology, Technique of CWM distribution system, etc. Relating to the coal ash, Engineering characteristics of the improved soil by deep mixing method using coal ash, Employment of fluidized bed ash as a basecourse material, On-site verification trials using fly ash for reclamation behind bulkheads, Water permeabilities of pulverized fuel ash, Separation of unburned carbon from coal fly ash through froth flotation, Practical use technology of coal ash (POZ-O-TEC), etc

  10. Comparative analyses for selected clean coal technologies in the international marketplace

    Energy Technology Data Exchange (ETDEWEB)

    Szpunar, C.B.; Gillette, J.L.

    1990-07-01

    Clean coal technologies (CCTs) are being demonstrated in research and development programs under public and private sponsorship. Many of these technologies could be marketed internationally. To explore the scope of these international opportunities and to match particular technologies with markets appearing to have high potential, a study was undertaken that focused on seven representative countries: Italy, Japan, Morocco, Turkey, Pakistan, the Peoples' Republic of China, and Poland. The results suggest that there are international markets for CCTs and that these technologies can be cost competitive with more conventional alternatives. The identified markets include construction of new plants and refurbishment of existing ones, especially when decision makers want to decrease dependence on imported oil. This report describes potential international market niches for U.S. CCTs and discusses the status and implications of ongoing CCT demonstration activities. Twelve technologies were selected as representative of technologies under development for use in new or refurbished industrial or electric utility applications. Included are the following: Two generic precombustion technologies: two-stage froth-flotation coal beneficiation and coal-water mixtures (CWMs); Four combustion technologies: slagging combustors, integrated-gasification combined-cycle (IGCC) systems, atmospheric fluidized-bed combustors (AFBCs), and pressurized fluidized-bed combustors (PFBCs); and Six postcombustion technologies: limestone-injection multistage burner (LIMB) systems, gas-reburning sorbent-injection (GRSI) systems, dual-alkali flue-gas desulfurization (FGD), spray-dryer FGD, the NOXSO process, and selective catalytic reduction (SCR) systems. Major chapters of this report have been processed separately for inclusion on the data base.

  11. Appalachian Clean Coal Technology Consortium. Final report, October 10, 1994--March 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, R.H.; Parekh, B.K.; Meloy, T.

    1997-12-31

    The Appalachian Clean Coal Technology Consortium is a group comprised of representatives from the Virginia Polytechnic Institute and State University, West Virginia University, and the University of Kentucky Center for Applied Energy Research, that was formed to pursue research in areas related to the treatment and processing of fine coal. Each member performed research in their respective areas of expertise and the report contained herein encompasses the results that were obtained for the three major tasks that the Consortium undertook from October, 1994 through March, 1997. In the first task, conducted by Virginia Polytechnic Institute, novel methods (both mechanical and chemical) for dewatering fine coal were examined. In the second task, the Center for Applied Energy Research examined novel approaches for destabilization of [highly stable] flotation froths. And in the third task, West Virginia University developed physical and mathematical models for fine coal spirals. The Final Report is written in three distinctive chapters, each reflecting the individual member`s task report. Recommendations for further research in those areas investigated, as well as new lines of pursuit, are suggested.

  12. In-plant testing of a novel coal cleaning circuit using advanced technologies, Quarterly report, March 1 - May 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q. [Southern Illinois Univ., Carbondale, IL (United States); Reed, S.; Mohanty, M.K. [Kerr-McGee Coal Corp., Oklahoma City, OK (United States)

    1996-12-31

    Research conducted at Southern Illinois University at Carbondale over the past two years has identified highly efficient methods for treating fine coal (i.e., -28 mesh). In this study, a circuit comprised of the three advanced fine coal cleaning technologies is being tested in an operating preparation plant to evaluate circuit performance and to compare the performance with the current technologies used to treat -16 mesh fine coal. The circuit integrated a Floatex hydrosizer, a Falcon concentrator and a Jameson froth flotation cell. The Floatex hydrosizer is being used as a primary cleaner for the nominally -16 mesh Illinois No. 5 fine coal circuit feed. The overflow of the Floatex is screened at 48 mesh using a Sizetec vibratory screen to produce a clean coal product from the screen overflow. The screen overflow is further treated by the Falcon and Jameson Cell. During this reporting period, tests were initiated on the fine coal circuit installed at the Kerr-McGee Galatia preparation plant. The circuit was found to reduce both the ash content and the pyritic sulfur content. Additional in-plant circuitry tests are ongoing.

  13. A comparison study of column flotation technologies for cleaning Illinois coal. [Quarterly] technical report, December 1, 1993--February 28, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Paul, B.C. [Southern Illinois Univ., Carbondale, IL (United States). Dept. of Mining Engineering

    1994-06-01

    The objectives of this research project are to optimize the performance of six commercially available column technologies for the treatment of Illinois Basin coal fines and to compare their performance on the basis of the recovery-grade curve and column throughput capacity. A statistically-designed, experimental program will be conducted to optimize the critical operating performance values of each flotation column. During the previous reporting period, construction and installation of the six flotation columns were completed. The flotation feed sample that will be used for the tests in this investigation was collected from a coal preparation plant treating the Illinois No. 5 seam coal. During this reporting period, the flotation feed sample was characterized on a size-by-size basis for its ash, total sulfur, and BTU content. A release analysis was also conducted to obtain the best possible recovery versus product grade curve that can be achieved by a froth flotation process for the treatment of the Illinois No. 5 flotation feed sample. Experiments were initiated on the Jameson Cell. The preliminary results indicate that the Jameson Cell achieves a separation performance that is close to the release data. The experimental program on the Jameson Cell and the other flotation technologies will be performed during the next reporting period.

  14. Application of Derrick Corporation's stack sizer technology for slimes reduction in 6 inch clean coal hydrocyclone circuits

    Energy Technology Data Exchange (ETDEWEB)

    Brodzik, P.

    2009-04-15

    The article discusses the successful introduction of Derrick Corporation's Stack Sizer technology for removing minus 200 mesh slimes from 6-inch coal hydrocyclone underflow prior to froth flotation or dewatering by screen bowl centrifuges. In 2006, the James River Coal Company selected the Stack Sizer fitted with Derrick 150 micron and 100 micron urethane screen panels for removal of the minus 100 mesh high ash clay fraction from the clean coal spiral product circuits. After this application proved successful, Derrick Corporation introduced new 75 micron urethane screen panels for use on the Stack Sizer. Evaluation of feed slurry to flotation cells and screen bowl centrifuges showed significant amounts of minus 75 micron that could potentially be removed by efficient screening technology. Removal of the minus 75 micron fraction was sought to reduce ash and moisture content of the final clean coal product. Full-scale lab tests confirmed that the Stack Sizer fitted with Derrick 75 micron urethane screen panels consistently reduced the minus 75 micron percentage in coal slurry from 6-inch clean coal hydrocyclone underflow that is approximately 15 to 20% solid by-weight and 30 to 60% minus 75 micron to a clean coal fraction that is approximately 13 to 16% minus 75 micron. As a result total ash is reduced from approximately 36 to 38% in the hydrocyclone underflow to 14 to 16% in the oversize product fraction form the Stack Sizers. 1 fig., 2 tabs., 5 photos.

  15. CHP Technologies

    Science.gov (United States)

    Learn about CHP technologies, including reciprocating engines, combustion turbines, steam turbines, microturbines, fuel cells, and waste heat to power. Access the Catalog of CHP Technologies and the Biomass CHP Catalog of Technologies.

  16. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  17. Advanced froth flotation techniques for fine coal cleaning

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, R.H.; Luttrell, G.H. [Virginia Polytechnic Institute and State Univ., Blacksburg, VA (United States)

    1994-12-31

    Advanced column flotation cells offer many potential advantages for the treatment of fine coal. The most important of these is the ability to achieve high separation efficiencies using only a single stage of processing. Unfortunately, industrial flotation columns often suffer from poor recovery, low throughput and high maintenance requirements as compared to mechanically-agitated conventional cells. These problems can usually be attributed to poorly-designed air sparging systems. This article examines the problems of air sparging in greater detail and offers useful guidelines for designing bubble generators for industrial flotation columns. The application of these principles in the design of a successful advanced fine coal flotation circuit is also presented.

  18. Activation of Sphalerite by Ammoniacal Copper Solution in Froth Flotation

    Directory of Open Access Journals (Sweden)

    Xian Xie

    2016-01-01

    Full Text Available The activation of sphalerite particles by ammoniacal copper solution (ACS was investigated in this study. This microflotation study was conducted on a single sphalerite mineral with the particles size of 38 μm to 75 μm. Results showed that ACS has somewhat better activation effect than copper sulphate (a traditional activator with sodium isobutyl xanthate as the collector. Agglomeration observation, contact angle measurement, and X-ray photoelectron spectroscopy measurement results of sphalerite particles verified the superiority of this new activator. Therefore, the substitution of copper sulphate with ACS would increase the separation efficiency not only in marmatite flotation but also in sphalerite flotation.

  19. Improving the performance of conventional and column froth flotation cells

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, B.J. [CQ Inc., Homer City, PA (United States)

    1995-11-01

    Many existing mining operations hover on the brink of producing competitively priced fuel with marginally acceptable sulfur levels. To remain competitive, these operations need to improve the yield of their coal processing facilities, lower the sulfur content of their clean coal, or lower the ash content of their clean coal. Fine coal cleaning processes offer the best opportunity for coal producers to increase their yield of high quality product. Over 200 coal processing plants in the U.S. already employ some type of conventional or column flotation device to clean fines. an increase in efficiency in these existing circuits could be the margin required to make these coal producers competitive.

  20. Technology Maturity is Technology Superiority

    Science.gov (United States)

    2008-09-09

    Dominant Air Power: Design For Tomorrow…Deliver Today 2 TECHNOLOGY MATURITY CONFERENCE • ONE DEFINITION OF MATURITY – GOOD JUDGEMENT COMES FROM...EXPERIENCE—EXPERIENCE COMES FROM BAD JUDGEMENT Dominant Air Power: Design For Tomorrow…Deliver Today 3 TECHNOLOGY MATURITY CONFERENCE • THIS WILL BE A...2008 TECHNOLOGY MATURITY CONFERENCE “ TECHNOLOGY MATURITY IS TECHNOLOGY SUPERIORITY” Aeronautical Systems Center Dr. Tom Christian ASC/EN, WPAFB OH

  1. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels...

  2. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  3. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  4. Emerging Technologies

    OpenAIRE

    Salgar, S. M.

    2004-01-01

    Phenomenal advancements have taken place in the field of Information and communication technologies in the last decade. Spectacular and innovative changes are expected to take place in these fields in coming decade. Networking technologies are going through a sea change. This paper enumerates the likely networking technologies which are emerging, particularly WLANs. Most of the personal communication in the country will be through cellular/ mobile technologies, which are also covered in the p...

  5. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    or anthropomorphism is important for the branding of new technology. Technology is seen as creating a techno-transcendence towards a more qualified humanity which is in contact with fundamental human values like intuition, vision, and sensing; all the qualities that technology, industrialization, and rationalization...

  6. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  7. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  8. Assistive Technologies

    Science.gov (United States)

    Auat Cheein, Fernando A., Ed.

    2012-01-01

    This book offers the reader new achievements within the Assistive Technology field made by worldwide experts, covering aspects such as assistive technology focused on teaching and education, mobility, communication and social interactivity, among others. Each chapter included in this book covers one particular aspect of Assistive Technology that…

  9. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research scope: The scope of the project is to study technological implementation processes by using Weick's sensemaking concept (Weick, 1995). The purpose of using a social constructivist approach to investigate technological implementation processes is to find out how new technologies transform......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...... & Brass, 1990; Kling 1991; Orlikowski 2000). It also demonstrates that technology is a flexible variable adapted to the organisation's needs, culture, climate and management philosophy, thus leading to different uses and outcomes of the same technology in different organisations (Barley 1986; 1990...

  10. Appropriate Technology as Indian Technology.

    Science.gov (United States)

    Barry, Tom

    1979-01-01

    Describes the mounting enthusiasm of Indian communities for appropriate technology as an inexpensive means of providing much needed energy and job opportunities. Describes the development of several appropriate technology projects, and the goals and activities of groups involved in utilizing low scale solar technology for economic development on…

  11. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    & Brass, 1990; Kling 1991; Orlikowski 2000). It also demonstrates that technology is a flexible variable adapted to the organisation's needs, culture, climate and management philosophy, thus leading to different uses and outcomes of the same technology in different organisations (Barley 1986; 1990......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...

  12. Chemistry Technology

    Data.gov (United States)

    Federal Laboratory Consortium — Chemistry technology experts at NCATS engage in a variety of innovative translational research activities, including:Design of bioactive small molecules.Development...

  13. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  14. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  15. Plastics Technology.

    Science.gov (United States)

    Barker, Tommy G.

    This curriculum guide is designed to assist junior high schools industrial arts teachers in planning new courses and revising existing courses in plastics technology. Addressed in the individual units of the guide are the following topics: introduction to production technology; history and development of plastics; safety; youth leadership,…

  16. Lasers technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The Lasers Technology Program of IPEN is committed to the development of new lasers based on the research of optical materials and new technologies, as well to laser applications in several areas: Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. The Program is basically divided into two main areas: Material and Laser Development and Laser Applications.

  17. Maritime Technology

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1997-01-01

    Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text.......Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text....

  18. Maritime Technology

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1997-01-01

    Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text.......Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text....

  19. Technology Push

    Science.gov (United States)

    Kennedy, Mike

    2008-01-01

    When students, teachers, administrators and others employed in education arrive at work every day on thousands of campuses across the nation, it should come as no surprise that at every step along the way, technology is there to greet them. Technological advancements in education, as well as in facilities operation and management, are not a…

  20. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  1. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  2. Technology collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Jacob [Halliburton (Brazil)

    2011-07-01

    The aim of this paper is to present Halliburton's Brazilian technology center. Halliburton has technology centers in the United States, Saudi Arabia, India, Singapore and Brazil, all of which aim at delivering accelerated innovation in the oil sector. The technology centers engage in research and development activities with the help of various universities and in collaboration with the customer or supplier. The Halliburton Brazil technology center provides its customers with timely research and development solutions for enhancing recovery and mitigating reservoir uncertainty; they are specialized in finding solutions for pre- and post-salt carbonate drilling and in the enhancement of production from mature fields. This presentation showcased the work carried out by the Halliburton Brazil technology center to help customers develop their deepwater field activities.

  3. Ergonomics technology

    Science.gov (United States)

    Jones, W. L.

    1977-01-01

    Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

  4. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  5. Banana technology

    Science.gov (United States)

    van Amstel, Willem D.; Schellekens, E. P. A.; Walravens, C.; Wijlaars, A. P. F.

    1999-09-01

    With 'Banana Technology' an unconventional hybrid fabrication technology is indicated for the production of very large parabolic and hyperbolic cylindrical mirror systems. The banana technology uses elastic bending of very large and thin glass substrates and fixation onto NC milled metal moulds. This technology has matured during the last twenty years for the manufacturing of large telecentric flat-bed scanners. Two construction types, called 'internal banana' and 'external banana; are presented. Optical figure quality requirements in terms of slope and curvature deviations are discussed. Measurements of these optical specifications by means of a 'finishing rod' type of scanning deflectometer or slope tester are presented. Design constraints for bending glass and the advantages of a new process will be discussed.

  6. Exploration technology

    Energy Technology Data Exchange (ETDEWEB)

    Roennevik, H.C. [Saga Petroleum A/S, Forus (Norway)

    1996-12-31

    The paper evaluates exploration technology. Topics discussed are: Visions; the subsurface challenge; the creative tension; the exploration process; seismic; geology; organic geochemistry; seismic resolution; integration; drilling; value creation. 4 refs., 22 figs.

  7. UPLIFTING TECHNOLOGY

    National Research Council Canada - National Science Library

    Thomas K Grose

    2015-01-01

      Inspired by Star Trek turbolifts, German engineering firm ThyssenKrupp says it's ready to replace cables and pulleys using maglev, or magnetic levitation technology, that enables the world's fastest...

  8. Videodisc technology

    Energy Technology Data Exchange (ETDEWEB)

    Marsh, F.E. Jr.

    1981-03-01

    An overview of the technology of videodiscs is given. The emphasis is on systems that use reflection or transmission of laser light. Possible use of videodiscs for storage of bibliographic information is considered. 6 figures, 3 tables. (RWR)

  9. Fabrication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Blaedel, K.L.

    1993-03-01

    The mission of the Fabrication Technology thrust area is to have an adequate base of manufacturing technology, not necessarily resident at Lawrence Livermore National Laboratory (LLNL), to conduct the future business of LLNL. The specific goals continue to be to (1) develop an understanding of fundamental fabrication processes; (2) construct general purpose process models that will have wide applicability; (3) document findings and models in journals; (4) transfer technology to LLNL programs, industry, and colleagues; and (5) develop continuing relationships with the industrial and academic communities to advance the collective understanding of fabrication processes. The strategy to ensure success is changing. For technologies in which they are expert and which will continue to be of future importance to LLNL, they can often attract outside resources both to maintain their expertise by applying it to a specific problem and to help fund further development. A popular vehicle to fund such work is the Cooperative Research and Development Agreement with industry. For technologies needing development because of their future critical importance and in which they are not expert, they use internal funding sources. These latter are the topics of the thrust area. Three FY-92 funded projects are discussed in this section. Each project clearly moves the Fabrication Technology thrust area towards the goals outlined above. They have also continued their membership in the North Carolina State University Precision Engineering Center, a multidisciplinary research and graduate program established to provide the new technologies needed by high-technology institutions in the US. As members, they have access to and use of the results of their research projects, many of which parallel the precision engineering efforts at LLNL.

  10. Cognitive technologies

    CERN Document Server

    Mello, Alan; Figueiredo, Fabrício; Figueiredo, Rafael

    2017-01-01

    This book focuses on the next generation optical networks as well as mobile communication technologies. The reader will find chapters on Cognitive Optical Network, 5G Cognitive Wireless, LTE, Data Analysis and Natural Language Processing. It also presents a comprehensive view of the enhancements and requirements foreseen for Machine Type Communication. Moreover, some data analysis techniques and Brazilian Portuguese natural language processing technologies are also described here. .

  11. Lasers technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners.

  12. Fabrication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Blaedel, K.L.

    1993-03-01

    The mission of the Fabrication Technology thrust area is to have an adequate base of manufacturing technology, not necessarily resident at Lawrence Livermore National Laboratory (LLNL), to conduct the future business of LLNL. The specific goals continue to be to (1) develop an understanding of fundamental fabrication processes; (2) construct general purpose process models that will have wide applicability; (3) document findings and models in journals; (4) transfer technology to LLNL programs, industry, and colleagues; and (5) develop continuing relationships with the industrial and academic communities to advance the collective understanding of fabrication processes. The strategy to ensure success is changing. For technologies in which they are expert and which will continue to be of future importance to LLNL, they can often attract outside resources both to maintain their expertise by applying it to a specific problem and to help fund further development. A popular vehicle to fund such work is the Cooperative Research and Development Agreement with industry. For technologies needing development because of their future critical importance and in which they are not expert, they use internal funding sources. These latter are the topics of the thrust area. Three FY-92 funded projects are discussed in this section. Each project clearly moves the Fabrication Technology thrust area towards the goals outlined above. They have also continued their membership in the North Carolina State University Precision Engineering Center, a multidisciplinary research and graduate program established to provide the new technologies needed by high-technology institutions in the US. As members, they have access to and use of the results of their research projects, many of which parallel the precision engineering efforts at LLNL.

  13. Technology and technology transfer: some basic issues

    OpenAIRE

    Shamsavari, Ali; Adikibi, Owen; Taha, Yasser

    2002-01-01

    This paper addresses various issues relating to technology and transfer of technology such as technology and society, technology and science, channels and models of technology transfer, the role of multinational companies in transfer of technology, etc. The ultimate objective is to pose the question of relevance of some existing models and ideas like technological independence in an increasingly globalised world economy.

  14. Technology cycles and technology revolutions

    Energy Technology Data Exchange (ETDEWEB)

    Paganetto, Luigi; Scandizzo, Pasquale Lucio

    2010-09-15

    Technological cycles have been characterized as the basis of long and continuous periods economic growth through sustained changes in total factor productivity. While this hypothesis is in part consistent with several theories of growth, the sheer magnitude and length of the economic revolutions experienced by humankind seems to indicate surmise that more attention should be given to the origin of major technological and economic changes, with reference to one crucial question: role of production and use of energy in economic development.

  15. Knowledge Technologies

    CERN Document Server

    Milton, Nick

    2008-01-01

    Several technologies are emerging that provide new ways to capture, store, present and use knowledge. This book is the first to provide a comprehensive introduction to five of the most important of these technologies: Knowledge Engineering, Knowledge Based Engineering, Knowledge Webs, Ontologies and Semantic Webs. For each of these, answers are given to a number of key questions (What is it? How does it operate? How is a system developed? What can it be used for? What tools are available? What are the main issues?). The book is aimed at students, researchers and practitioners interested in Knowledge Management, Artificial Intelligence, Design Engineering and Web Technologies. During the 1990s, Nick worked at the University of Nottingham on the application of AI techniques to knowledge management and on various knowledge acquisition projects to develop expert systems for military applications. In 1999, he joined Epistemics where he worked on numerous knowledge projects and helped establish knowledge management...

  16. Persuasive Technology

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included in this vol......This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included...... in this volume. The topics covered are emotions and user experience, ambient persuasive systems, persuasive design, persuasion profiles, designing for health, psychology of persuasion, embodied and conversational agents, economic incentives, and future directions for persuasive technology....

  17. Seafood Technology

    DEFF Research Database (Denmark)

    Børresen, Torger

    This presentation will fill the total picture of this conference between fisheries and aquaculture, blue biotech and bioconservation, by considering the optimal processing technology of marine resources from the raw material until the seafood reaches the plate of the consumer. The situation today...... must be performed such that total traceability and authenticity of the final products can be presented on demand. The most important aspects to be considered within seafood technology today are safety, healthy products and high eating quality. Safety can be divided into microbiological safety...... and not presenting any safety risk per se. Seafood is healthy due to the omega-3 fatty acids and the nutritional value of vitamins, peptides and proteins. The processing technology must however be performed such that these valuable features are not lost during production. The same applies to the eating quality. Any...

  18. Persuasive Technology

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included in this vol......This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included...... in this volume. The topics covered are emotions and user experience, ambient persuasive systems, persuasive design, persuasion profiles, designing for health, psychology of persuasion, embodied and conversational agents, economic incentives, and future directions for persuasive technology....

  19. Technology Transfer

    Science.gov (United States)

    Smith, Nanette R.

    1995-01-01

    The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

  20. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    Samsung introduced in 2008 a mobile phone called "Soul" made with a human touch and including itself a "magic touch". Through the analysis of a Nokia mobile phone TV-commercials I want to examine the function and form of digital technology in everyday images. The mobile phone and its digital came...... commercials and internet commercials for mobile phones from Nokia, or handheld computers, as Sony-Ericsson prefers to call them. Digital technology points towards a forgotten pre-human and not only post-human condition....

  1. Playful Technology

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Eriksson, Eva

    2013-01-01

    In this paper, the design of future services for children in Danish public libraries is discussed, in the light of new challenges and opportunities in relation to new media and technologies. The Danish government has over the last few years initiated and described a range of initiatives regarding...... in the library, the changing role of the librarians and the library space. We argue that intertwining traditional library services with new media forms and engaging play is the core challenge for future design in physical public libraries, but also that it is through new media and technology that new...

  2. Playful Technology

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Eriksson, Eva

    2013-01-01

    in the library, the changing role of the librarians and the library space. We argue that intertwining traditional library services with new media forms and engaging play is the core challenge for future design in physical public libraries, but also that it is through new media and technology that new......In this paper, the design of future services for children in Danish public libraries is discussed, in the light of new challenges and opportunities in relation to new media and technologies. The Danish government has over the last few years initiated and described a range of initiatives regarding...

  3. Architectural technology

    DEFF Research Database (Denmark)

    2005-01-01

    The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...

  4. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  5. Blast Technologies

    Science.gov (United States)

    2011-06-27

    Team Leader Risa Scherer Blast Mitigation Interior and Laboratory Team Leader Blast Technologies POC’s Government Point Of Contacts (POCs): To...to yield injury assessments at higher fidelities and with higher confidence UNCLASSIFIED UNCLASSIFIED Risa Scherer Blast Mitigation Interior and

  6. Energy Technology.

    Science.gov (United States)

    Eaton, William W.

    Reviewed are technological problems faced in energy production including locating, recovering, developing, storing, and distributing energy in clean, convenient, economical, and environmentally satisfactory manners. The energy resources of coal, oil, natural gas, hydroelectric power, nuclear energy, solar energy, geothermal energy, winds, tides,…

  7. Strategic Technology

    Science.gov (United States)

    2012-03-11

    the spectrum of future conflict and engagement. Technology Surprise Francis Fukuyama , in his introduction to the book Blindside, summarizes recent...atrocities or large-scale natural disasters abroad 12 Francis Fukuyama , ed, Blindside (Baltimore, MD: Brookings Institute Press, 2007), 1. 13 Defense

  8. (Environmental technology)

    Energy Technology Data Exchange (ETDEWEB)

    Boston, H.L.

    1990-10-12

    The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

  9. GIG Technologies

    Science.gov (United States)

    2008-08-08

    caching • GIG as a sensor • Cyber SA/defense • Cross Domain Information Sharing • Multi-Level Security solutions • Enterprise Service Bus ( ESB ...Link Layer Technologies Integrated Link Layer All Optical Core For Terrestrial and Space Networks Separate Transmission Networks Mid-Term Integrated

  10. Geospatial Technology

    Science.gov (United States)

    Reed, Philip A.; Ritz, John

    2004-01-01

    Geospatial technology refers to a system that is used to acquire, store, analyze, and output data in two or three dimensions. This data is referenced to the earth by some type of coordinate system, such as a map projection. Geospatial systems include thematic mapping, the Global Positioning System (GPS), remote sensing (RS), telemetry, and…

  11. Sport Technology

    CSIR Research Space (South Africa)

    Kirkbride, T

    2007-11-01

    Full Text Available in design and manufacturing to virtual reality. There are carbon fiber materials used and in performance analysis that use video base technology. In the 1999 cricket World Cup, small earphones were used for Hansie to communicate with the coach and were later...

  12. Vacuum Technology

    Energy Technology Data Exchange (ETDEWEB)

    Biltoft, P J

    2004-10-15

    The environmental condition called vacuum is created any time the pressure of a gas is reduced compared to atmospheric pressure. On earth we typically create a vacuum by connecting a pump capable of moving gas to a relatively leak free vessel. Through operation of the gas pump the number of gas molecules per unit volume is decreased within the vessel. As soon as one creates a vacuum natural forces (in this case entropy) work to restore equilibrium pressure; the practical effect of this is that gas molecules attempt to enter the evacuated space by any means possible. It is useful to think of vacuum in terms of a gas at a pressure below atmospheric pressure. In even the best vacuum vessels ever created there are approximately 3,500,000 molecules of gas per cubic meter of volume remaining inside the vessel. The lowest pressure environment known is in interstellar space where there are approximately four molecules of gas per cubic meter. Researchers are currently developing vacuum technology components (pumps, gauges, valves, etc.) using micro electro mechanical systems (MEMS) technology. Miniature vacuum components and systems will open the possibility for significant savings in energy cost and will open the doors to advances in electronics, manufacturing and semiconductor fabrication. In conclusion, an understanding of the basic principles of vacuum technology as presented in this summary is essential for the successful execution of all projects that involve vacuum technology. Using the principles described above, a practitioner of vacuum technology can design a vacuum system that will achieve the project requirements.

  13. Technology Programme

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo (ed.)

    2005-07-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  14. Hearing Assistive Technology

    Science.gov (United States)

    ... for the Public / Hearing and Balance Hearing Assistive Technology Hearing Assistive Technology: FM Systems | Infrared Systems | Induction ... Assistive Technology Systems Solutions What are hearing assistive technology systems (HATS)? Hearing assistive technology systems (HATS) are ...

  15. Communications technology

    Science.gov (United States)

    Cuccia, C. Louis; Sivo, Joseph

    1986-01-01

    The technologies for optimized, i.e., state of the art, operation of satellite-based communications systems are surveyed. Features of spaceborne active repeater systems, low-noise signal amplifiers, power amplifiers, and high frequency switches are described. Design features and capabilities of various satellite antenna systems are discussed, including multiple beam, shaped reflector shaped beam, offset reflector multiple beam, and mm-wave and laser antenna systems. Attitude control systems used with the antenna systems are explored, along with multiplexers, filters, and power generation, conditioning and amplification systems. The operational significance and techniques for exploiting channel bandwidth, baseband and modulation technologies are described. Finally, interconnectivity among communications satellites by means of RF and laser links is examined, as are the roles to be played by the Space Station and future large space antenna systems.

  16. Manufacturing technology

    Energy Technology Data Exchange (ETDEWEB)

    Leonard, J.A.; Floyd, H.L.; Goetsch, B.; Doran, L. [eds.

    1993-08-01

    This bulletin depicts current research on manufacturing technology at Sandia laboratories. An automated, adaptive process removes grit overspray from jet engine turbine blades. Advanced electronic ceramics are chemically prepared from solution for use in high- voltage varistors. Selective laser sintering automates wax casting pattern fabrication. Numerical modeling improves performance of photoresist stripper (simulation on Cray supercomputer reveals path to uniform plasma). And mathematical models help make dream of low- cost ceramic composites come true.

  17. Emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Shin-yee

    1993-03-01

    The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

  18. Technology Management

    DEFF Research Database (Denmark)

    Pilkington, Alan

    2014-01-01

    This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter-relationships. Spe......This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter......-relationships. Specific results from different levels of analysis show the different dimensions of technology management: • Co-word terms identify themes • Journal co-citation network: linking to other disciplines • Co-citation network show concentrations of themes The analysis shows that MOT has a bridging role...... in integrating ideas from several distinct disciplines. This suggests that management and strategy are central to MOT which essentially relates to the firm rather than policy. Similarly we have a dual focus on capabilities, but can see subtle differences in how we view these ideas, either through an inwards...

  19. Agreement technologies

    CERN Document Server

    Ossowski, Sascha

    2013-01-01

    More and more transactions, whether in business or related to leisure activities, are mediated automatically by computers and computer networks, and this trend is having a significant impact on the conception and design of new computer applications. The next generation of these applications will be based on software agents to which increasingly complex tasks can be delegated, and which interact with each other in sophisticated ways so as to forge agreements in the interest of their human users. The wide variety of technologies supporting this vision is the subject of this volume. It summarises

  20. Seafood Technology

    DEFF Research Database (Denmark)

    Børresen, Torger

    -Trophic Aquaculture (IMTA) is needed to pay attention to environmental protection and continued biodiversity. Further, it is necessary to use all the raw materials provided such that present by-products and side streams in processing are being upgraded for a better use than today. Principles of blue biotechnology may......This presentation will fill the total picture of this conference between fisheries and aquaculture, blue biotech and bioconservation, by considering the optimal processing technology of marine resources from the raw material until the seafood reaches the plate of the consumer. The situation today...

  1. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

  2. Wearable Technology

    Science.gov (United States)

    Watson, Amanda

    2013-01-01

    Wearable technology projects, to be useful, in the future, must be seamlessly integrated with the Flight Deck of the Future (F.F). The lab contains mockups of space vehicle cockpits, habitat living quarters, and workstations equipped with novel user interfaces. The Flight Deck of the Future is one element of the Integrated Power, Avionics, and Software (IPAS) facility, which, to a large extent, manages the F.F network and data systems. To date, integration with the Flight Deck of the Future has been limited by a lack of tools and understanding of the Flight Deck of the Future data handling systems. To remedy this problem it will be necessary to learn how data is managed in the Flight Deck of the Future and to develop tools or interfaces that enable easy integration of WEAR Lab and EV3 products into the Flight Deck of the Future mockups. This capability is critical to future prototype integration, evaluation, and demonstration. This will provide the ability for WEAR Lab products, EV3 human interface prototypes, and technologies from other JSC organizations to be evaluated and tested while in the Flight Deck of the Future. All WEAR Lab products must be integrated with the interface that will connect them to the Flight Deck of the Future. The WEAR Lab products will primarily be programmed in Arduino. Arduino will be used for the development of wearable controls and a tactile communication garment. Arduino will also be used in creating wearable methane detection and warning system.

  3. Technology maturity and technology development

    Energy Technology Data Exchange (ETDEWEB)

    Underhill, Gary K.; Carlson, Ronald A.; Clendinning, William A.; Erdos, Jozsef; Gault, John; Hall, James W.; Jones, Robert L.; Michael, Herbert K.; Powell, Paul H.; Riemann, Carl F.; Rios-Castellon, Lorenzo; Shepherd, Burchard P.; Wilson, John S.

    1976-01-01

    All of the work reported in the preceding chapters was performed in order to assess the technical, economic, and energetic feasibility of proceeding with more detailed studies of the geopressured geothermal resource. The preliminary conceptual design and costing activities represented the prime activity for component by component review of the maturity of the technology available for resource utilization facilities. The economics and energetics studies focussed attentions on the areas of major capital and energy investment; these results comprise a useful guide for focussing design in order to reduce initial and operations and maintenance costs and/or investment. The following presents a discussion of the primary technical problems identified.

  4. Incineration technologies

    CERN Document Server

    Buekens, Alfons

    2013-01-01

    Waste incineration is the art of completely combusting waste, while maintaining or reducing emission levels below current emission standards. Where possible, objectives include the recovering of energy as well as the  combustion residues.  Successful waste incineration makes it possible to achieve a deep reduction in waste volume, obtain a compact and sterile residue, and eliminate a wide array of pollutants. This book places waste incineration within the wider context of waste management, and demonstrates that, in contrast to landfills and composting, waste incineration can eliminate objectionable and hazardous properties such as flammability and toxicity, result in a significant reduction in volume, and destroy gaseous and liquid waste streams leaving little or no residues beyond those linked to flue gas neutralization and treatment. Moreover, waste incineration sterilizes and destroys putrescible matter, and produces usable heat.  Incineration Technologies first appeared as a peer-reviewed contribution ...

  5. BIOGAS TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    D.B. SALUNKHE

    2012-12-01

    Full Text Available Due to scarcity of petroleum and coal it threatens supply of fuel throughout the world also problem of their combustion leads to research in different corners to get access the new sources of energy, like renewable energy resources. Solar energy, wind energy, different thermal and hydro sources of energy, biogas are all renewable energy resources. But, biogas is distinct from other renewable energies because of its characteristics of using, controlling and collecting organic wastes and at the same time producing fertilizer and water for use in agricultural irrigation. Biogas does not have any geographical limitations nor does it require advanced technology for producing energy, also it is very simple to use and apply. Anaerobic digestion is controlled biological degradation process which allows efficient capturing & utilization of biogas (approximately 60% methane and 40% carbon dioxide for energy generation. Anaerobic digestion of food waste is achievable but different types, composition of food waste results in varying degrees of methane yields, and thus the effects of mixing various types of food waste and their proportions should be determined on case by case basis.

  6. CMM Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Robert C.

    2008-10-20

    This project addressed coordinate measuring machine (CMM) technology and model-based engineering. CMM data analysis and delivery were enhanced through the addition of several machine types to the inspection summary program. CMM hardware and software improvements were made with the purchases of calibration and setup equipment and new model-based software for the creation of inspection programs. Kansas City Plant (KCP) personnel contributed to and influenced the development of dimensional metrology standards. Model-based engineering capabilities were expanded through the development of software for the tolerance analysis of piece parts and for the creation of model-based CMM inspection programs and inspection plans and through the purchase of off-the-shelf software for the tolerance analysis of mechanical assemblies. An obsolete database application used to track jobs in Precision Measurement was replaced by a web-based application with improved query and reporting capabilities. A potential project to address the transformation of the dimensional metrology enterprise at the Kansas City Plant was identified.

  7. TECHNOLOGICAL WASTE DISPOSAL BY SUBSURFACE INJECTION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Janković Branimir

    2002-12-01

    Full Text Available The application of oilfield and solution mining technology to subsurface disposal of technological wastes has proven to be an environmentally, technically and economically suitable method for the disposal of the waste generated in petroleum industry as well as other industrial branches. This paper describes the subsurface injection technology, the disposal formation characteristics, the waste disposal well design, evaluates the environmental impact of above mentioned technology and proposes a solutions for disposing of technological wastes in Croatia or nerby region by implementing underground injection technology according to the world experience (the paper is published in Croatian.

  8. Photon technology. Laser process technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For developing laser process technology by interaction between substance and photon, the present state, system, R and D issues and proposal of such technology were summarized. Development of the photon technology aims at the modification of bonding conditions of substances by quantum energy of photon, and the new process technology for generating ultra- high temperature and pressure fields by concentrating photon on a minute region. Photon technology contributes to not only the conventional mechanical and thermal forming and removal machining but also function added machining (photon machining) in quantum level and new machining technology ranging from macro- to micro-machining, creating a new industrial field. This technology extends various fields from the basis of physics and chemistry to new bonding technology. Development of a compact high-quality high-power high-efficiency photon source, and advanced photon transmission technology are necessary. The basic explication of an unsolved physicochemical phenomenon related to photon and substance, and development of related application technologies are essential. 328 refs., 147 figs., 13 tabs.

  9. Excimer Laser Technology

    CERN Document Server

    Basting, Dirk

    2005-01-01

    This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

  10. Technology transfer by multinationals

    OpenAIRE

    Kostyantyn Zuzik

    2003-01-01

    The paper analyses the issue of technology transfer by multinational corporations. The following questions are explored: (a) world market of technologies, the role of MNCs (b) Choice of the technology transfer mode, Dunning's OLI-theory as a factor of the choice of the mode of transfer (c) measurement and profitability of technology transfer (d) transfer of technology through partnerships, JVs, alliances and through M&As (e) aspects of technology transfer by services multinationals. Paper uti...

  11. Technology transfer by multinationals

    OpenAIRE

    2003-01-01

    The paper analyses the issue of technology transfer by multinational corporations. The following questions are explored: (a) world market of technologies, the role of MNCs (b) Choice of the technology transfer mode, Dunning's OLI-theory as a factor of the choice of the mode of transfer (c) measurement and profitability of technology transfer (d) transfer of technology through partnerships, JVs, alliances and through M&As (e) aspects of technology transfer by services multinationals. Paper uti...

  12. Water Innovation and Technology

    Science.gov (United States)

    Water technologies are a specific sector that EPA works to address through the water technology cluster, aging infrastructure research, green infrastructure, and major industry meetings such as WEFTEC.

  13. Morgantown Energy Technology Center, technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

  14. Fundamentals of technology roadmapping

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.L.; Bray, O.H.

    1997-04-01

    Technology planning is important for many reasons. Globally, companies are facing many competitive problems. Technology roadmapping, a form of technology planning can help deal with this increasingly competitive environment. While it has been used by some companies and industries, the focus has always been on the technology roadmap as a product, not on the process. This report focuses on formalizing the process so that it can be more broadly and easily used. As a DOE national security laboratory with R&D as a major product, Sandia must do effective technology planning to identify and develop the technologies required to meet its national security mission. Once identified, technology enhancements or new technologies may be developed internally or collaboratively with external partners. For either approach, technology roadmapping, as described in this report, is an effective tool for technology planning and coordination, which fits within a broader set of planning activities. This report, the second in a series on technology roadmapping, develops and documents this technology roadmapping process, which can be used by Sandia, other national labs, universities, and industry. The main benefit of technology roadmapping is that it provides information to make better technology investment decisions by identifying critical technologies and technology gaps and identifying ways to leverage R&D investments. It can also be used as a marketing tool. Technology roadmapping is critical when the technology investment decision is not straight forward. This occurs when it is not clear which alternative to pursue, how quickly the technology is needed, or when there is a need to coordinate the development of multiple technologies. The technology roadmapping process consists of three phases - preliminary activity, development of the technology roadmap, and follow-up activity.

  15. Marketing technology in macroeconomics.

    Science.gov (United States)

    Tamegawa, Kenichi

    2012-01-01

    In this paper, we incorporate a marketing technology into a dynamic stochastic general equilibrium model by assuming a matching friction for consumption. An improvement in matching can be interpreted as an increase in matching technology, which we call marketing technology because of similar properties. Using a simulation analysis, we confirm that a positive matching technology shock can increase output and consumption.

  16. Educational Technology in China

    Science.gov (United States)

    Meifeng, Liu; Jinjiao, Lv; Cui, Kang

    2010-01-01

    This paper elaborates the two different academic views of the identity of educational technology in China at the current time--advanced-technology-oriented cognition, known as Electrifying Education, and problem-solving-oriented cognition, known as Educational Technology. It addresses five main modes of educational technology in China: as a…

  17. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are d

  18. Emerging technology and ethics

    CERN Document Server

    Wakunuma, Kutoma

    2011-01-01

    This e-book on Emerging Technologies and Ethics includes a collection of essays which explore the future and ethics of emerging information and communication technologies. Articles in the collection include an overview of the legal implications which may be relevant to the ethical aspects of emerging technologies and also ethical issues arising from the mass-take up of mobile technologies.

  19. Composite Technology for Exploration

    Science.gov (United States)

    Fikes, John

    2017-01-01

    The CTE (Composite Technology for Exploration) Project will develop and demonstrate critical composites technologies with a focus on joints that utilize NASA expertise and capabilities. The project will advance composite technologies providing lightweight structures to support future NASA exploration missions. The CTE project will demonstrate weight-saving, performance-enhancing bonded joint technology for Space Launch System (SLS)-scale composite hardware.

  20. Newnes communications technology handbook

    CERN Document Server

    Lewis, Geoff

    1994-01-01

    Newnes Communications Technology Handbook provides a discussion on different topics relevant to communications technology. The book is comprised of 39 chapters that tackle a wide variety of concern in communications technology. The coverage of the text includes technologies, such as analog digital communications systems, radio frequency receiver, and satellite systems. The book also discusses some methods and techniques used in communications technology, including mixer signal processing, modulation and demodulation, and spread spectrum techniques. The text will be of great use to engineers, t

  1. Technology and Nursing

    OpenAIRE

    Maria Vera Lúcia Moreira Leitão Cardoso

    2012-01-01

    In the present age we cannot disassociate from emerging issues, which involve science, communication, health and technology, the influence of media, technological advances, and the use of computers in all spheres of life. The concepts created for technology cover various evaluation approaches, which depend upon which type of technology, approaches, usefulness and influences in a particular area of knowledge. Technological advances cover several areas, figuring quantum physics, nanotechnology,...

  2. Entry and Technological Performance in New Technology Domains : Technological Opportunities, Technology Competition and Technological Relatedness

    NARCIS (Netherlands)

    Leten, B.; Belderbos, R.; Van Looy, B.

    2016-01-01

    Entry and success in new technology domains (NTDs) is essential for firms' long-term performance. We argue that firms' choices to enter NTDs and their subsequent performance in these domains are not only governed by firm-level factors but also by environmental characteristics. Entry is encouraged by

  3. GRACE BIOREMEDIATION TECHNOLOGIES - DARAMEND™ BIOREMEDIATION TECHNOLOGY. INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Grace Dearborn's DARAMEND™ Bioremediation Technology was developed to treat soils/sediment contaminated with organic contaminants using solid-phase organic amendments. The amendments increase the soil’s ability to supply biologically available water/nutrients to micro...

  4. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  5. Payload software technology: Software technology development plan

    Science.gov (United States)

    1977-01-01

    Programmatic requirements for the advancement of software technology are identified for meeting the space flight requirements in the 1980 to 1990 time period. The development items are described, and software technology item derivation worksheets are presented along with the cost/time/priority assessments.

  6. Search Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  7. Available Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  8. Educational technology and the new technologies

    NARCIS (Netherlands)

    Verhagen, Pløn W.; Plomp, Tjeerd

    1989-01-01

    Like everywhere in our culture, new technologies gradually penetrate the field of education. This may be seen as a problem area, which asks for appropriate, actions by teachers, curriculum experts, instructional designers and others. As "technology" seems to be the main issue,one may quation whether

  9. SHARED TECHNOLOGY TRANSFER PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  10. ACR-700 advanced technologies

    Energy Technology Data Exchange (ETDEWEB)

    Tapping, R.L.; Turner, C.W. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Yu, S.K.W. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada); Olmstead, R.; Speranzini, R.A. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

    2004-12-01

    A successful advanced reactor plant will have optimized economics including reduced operating and maintenance costs, improved performance, and enhanced safety. Incorporating improvements based on advanced technologies ensures cost, safety and operational competitiveness of the ACR-700. These advanced technologies include modern configuration management; construction technologies; operational technology for the control centre and information systems for plant monitoring and analysis. This paper summarizes the advanced technologies used to achieve construction and operational improvements to enhance plant economic competitiveness, advances in the operational technology used for reactor control, and presents the development of the Smart CANDU suite of tools and its application to existing operating reactors and to the ACR-700. (author)

  11. [Health technology in Mexico].

    Science.gov (United States)

    Cruz, C; Faba, G; Martuscelli, J

    1992-01-01

    The features of the health technology cycle are presented, and the effects of the demographic, epidemiologic and economic transition on the health technology demand in Mexico are discussed. The main problems of science and technology in the context of a decreasing scientific and technological activity due to the economic crisis and the adjustment policies are also analyzed: administrative and planning problems, low impact of scientific production, limitations of the Mexican private sector, and the obstacles for technology assessment. Finally, this paper also discusses the main support strategies for science and technology implemented by the Mexican government during the 1980s and the challenges and opportunities that lie ahead.

  12. Technological Style is History

    DEFF Research Database (Denmark)

    Blond, Lasse

    culture, and just as importantly that culture shapes technology. By looking at a recent transfer of technology this reciprocal exchange is elaborated by considering the cultural or contextual influence in the adaptation of technology. In this connection the notion of technological style is revisited...... by questioning whether it pays due attention to the non-technical factors of the process? In order to compensate for the deficiencies of the technological style as a sensitizing device the concept of sociotechnical style is introduced – a concept more in tune with resent research in technology studies....

  13. Cloud Computing Technologies

    Directory of Open Access Journals (Sweden)

    Sean Carlin

    2012-06-01

    Full Text Available This paper outlines the key characteristics that cloud computing technologies possess and illustrates the cloud computing stack containing the three essential services (SaaS, PaaS and IaaS that have come to define the technology and its delivery model. The underlying virtualization technologies that make cloud computing possible are also identified and explained. The various challenges that face cloud computing technologies today are investigated and discussed. The future of cloud computing technologies along with its various applications and trends are also explored, giving a brief outlook of where and how the technology will progress into the future.

  14. Technology Matters - When new technology reshape innovation

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...... the firm, which over time becomes a source of innovation. However, through adoption of this new technology firms engage in a mu-tual learning and forming process where the firm learn by using the new technol-ogy. When learning, the firm and the new technology is mutually formed as the firm tries to adopt...... learning. As the possibilities of the new hybrid tech-nology are recognised a new strategy based on the new hybrid technology is formed trying to exploit its advantages. The paper uses a number of case studies in firms implementing product configuration systems to substantiate these claims. It has been...

  15. Focus on Technologies: Worry or Technology?

    Directory of Open Access Journals (Sweden)

    Saulius Kanišauskas

    2015-10-01

    Full Text Available The paper analyses different attitudes towards technologies in contemporary philosophical discourses. It points out that classical notion of technology formulated by Martin Heidegger seems to be more and more often questioned and even forgotten. As a result, it is being replaced by the theory of determinism, according to which the change of technologies determines the changes in social systems, the human being including. This happens this way and not vice versa. Nowadays technē, or “technika” (in English: technology is mostly understood in the instrumental meaning or in the meaning of power. It is considered to be a powerful means, tool or mechanism to influence, change, control and manipulate human consciousness and human feelings. Despite the fact that technologies have already been tamed, the problem of huge responsibility for using and developing them arises. It is questioned whether the increasing society’s attention to modern technologies is not a particular “technology” of the postmodern capitalism to manipulate social consciousness. In parallel with “yes” answer to this question, Albert Borgmann’s idea that the causes of technological development have an ontological dimension, i.e. the causes are rooted in the nature of human beings themselves and their desire to adore own creativity, is discussed. Thus, it becomes necessary to probe deeper into the nature of creativity.

  16. Resources, Technology, and Strategy

    DEFF Research Database (Denmark)

    Resources, Technology and Strategy brings together contributors from Europe, North America and Asia to consider the strategic relationship between technology and other resources, such as production capabilities, marketing prowess, finance and organisational culture. Throughout the book...

  17. TECHNOLOGICAL IMPLEMENTATION PLAN

    DEFF Research Database (Denmark)

    Bellini, Anna

    2004-01-01

    This document has the purpose to describe the technological implementation plan in the IDEAL project.......This document has the purpose to describe the technological implementation plan in the IDEAL project....

  18. Technologies. [space power sources

    Science.gov (United States)

    Brandhorst, Henry W., Jr.

    1992-01-01

    Energy technologies to meet the power requirements of future space missions are reviewed. Photovoltaic, solar dynamic, and solar thermal technologies are discussed along with techniques for energy storage and power management and distribution.

  19. Technology Implementation Plan

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe

    The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential.......The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential....

  20. INFORMATION TECHNOLOGIES IN TOURISM

    Directory of Open Access Journals (Sweden)

    Radka Tosheva

    2016-12-01

    Full Text Available In this article the focus is on the role of information technology in tourism, tourism business, electronic payments, software used by tourist companies, new technologies for online advertising and shopping, software for mobile devices.

  1. Geothermal Power Technologies

    DEFF Research Database (Denmark)

    Montagud, Maria E. Mondejar; Chamorro, C.R.

    2016-01-01

    Although geothermal energy has been widely deployed for direct use in locations with especial geologic manifestations, its potential for power generation has been traditionally underestimated. Recent technology developments in drilling techniques and power conversion technologies from low...

  2. Technology transfer for adaptation

    Science.gov (United States)

    Biagini, Bonizella; Kuhl, Laura; Gallagher, Kelly Sims; Ortiz, Claudia

    2014-09-01

    Technology alone will not be able to solve adaptation challenges, but it is likely to play an important role. As a result of the role of technology in adaptation and the importance of international collaboration for climate change, technology transfer for adaptation is a critical but understudied issue. Through an analysis of Global Environment Facility-managed adaptation projects, we find there is significantly more technology transfer occurring in adaptation projects than might be expected given the pessimistic rhetoric surrounding technology transfer for adaptation. Most projects focused on demonstration and early deployment/niche formation for existing technologies rather than earlier stages of innovation, which is understandable considering the pilot nature of the projects. Key challenges for the transfer process, including technology selection and appropriateness under climate change, markets and access to technology, and diffusion strategies are discussed in more detail.

  3. Effects of New Technologies.

    Science.gov (United States)

    Social and Labour Bulletin, 1980

    1980-01-01

    Transnational implications of technological change and innovation in telecommunications are discussed, including impact on jobs and industrial relations, computer security, access to information, and effects of technological innovation on international economic systems. (SK)

  4. CSIR Technology Impact 2000

    CSIR Research Space (South Africa)

    CSIR

    2000-01-01

    Full Text Available This millennium issue of Technology Impact celebrates the CSIR's contributions during the transitional 1999/2000 year. It presents a rich canvas portrays technology solutions and information which have touched the lives of people both within...

  5. Genealogies of Modern Technology

    DEFF Research Database (Denmark)

    Riis, Søren

    2008-01-01

    Does modern technology differ from ancient technology and does it have a unique essence? This twofold question opens one of Martin Heidegger's most influential philosophical inquiries, The Question Concerning Technology. The answer Heidegger offers has inspired various critiques and appraisals from...... a vast number of contemporary scholars of technology.1 Heidegger's answer is traditionally thought to suggest a great difference between ancient and modern technology. However, by re-examining Heidegger's text, it is possible to discover previously ignored or misunderstood lines of thoughts that affirm...... a multi-stable interpretation of the origin of modern technology. In what follows, we shall see how The Question Concerning Technology in fact supports three different genealogies of modern technology...

  6. CSIR Technology Impact 1993

    CSIR Research Space (South Africa)

    CSIR

    1993-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  7. Advancement in Engineering Technology

    DEFF Research Database (Denmark)

    Kalia, Kartik; Rehman, M. Atiqur; Hussain, Dil muhammed Akbar

    2016-01-01

    In this paper we will be discussing about the impact of technology on our daily lives. How everybody is dependent upon technology in one or other way. Methods/Statistical Analysis: Technology has played a significant role in the evolution of the society. Science has produced many new ideas...... but to harvest those ideas, technology is a must. With the huge requirement of engineering equipment's, the industry needs specialists who can manage and operate these technologies. Detailed information about the merits and demerits of technology is also mentioned in this paper. Findings: Technology has affected...... the environment on a great scale; in some cases, technology is even replacing human being or use of manpower. So proper counter measures have been mentioned, which can be used to control and limit harmful effect....

  8. Technology licensing in China

    DEFF Research Database (Denmark)

    Wang, Yuandi; Li-Ying, Jason; Chen, Jin

    2015-01-01

    We explore the landscape of technology licensing among Chinese entities in the period 2000–12, using a unique database on technological licensing from the State Intellectual Property Office of China. We find that: first, among Chinese licensee organizations, firms have dominated in terms...... of the number of licensed technologies; second, the geographical distribution of licensed technologies among the provinces has gradually reached a new quantitative balance; third, utility models are the most popular technologies to be licensed and the majority of technology licensing in China has been between...... Chinese entities, and most transactions have been local within provinces; and finally, Chinese firms have gradually in-licensed newer and newer technologies, but the technologies in-licensed from foreign sources are by no means state-of-the-art. We make several suggestions for innovation policy...

  9. CSIR Technology Impact 1999

    CSIR Research Space (South Africa)

    CSIR

    1999-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  10. Discourses of Technology

    DEFF Research Database (Denmark)

    Sommer, Jannek K.; Knudsen, Gry Høngsmark

    (Kozinets, 2008) as drivers of consumer acceptance of new technology. Similarly, Giesler (2008) has conceptualized consumer acceptance of technology as a form of marketplace drama, in which market ideologies are negotiated between consumers and media discourses. We suggest to study discourses around failed......In this poster we address consumption of technology from the perspective of failure. A large body of studies of consumption of technology have focused on consumer acceptance (Kozinets, 2008). These studies have identified particular narratives about social and economic progress, and pleasure...... to understand how rejection and resistance build in the imagined use of technology. The study extends research on consumption of technology by demonstrating the importance of emergent discourses of new technology. We argue that the success of a particular new technology partly depends on the imagined...

  11. CSIR Technology Impact 1996

    CSIR Research Space (South Africa)

    CSIR

    1996-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  12. CSIR Technology Impact 1994

    CSIR Research Space (South Africa)

    CSIR

    1994-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  13. Advancement in Engineering Technology

    DEFF Research Database (Denmark)

    Kalia, Kartik; Rehman, M. Atiqur; Hussain, Dil muhammed Akbar

    2016-01-01

    In this paper we will be discussing about the impact of technology on our daily lives. How everybody is dependent upon technology in one or other way. Methods/Statistical Analysis: Technology has played a significant role in the evolution of the society. Science has produced many new ideas...... but to harvest those ideas, technology is a must. With the huge requirement of engineering equipment's, the industry needs specialists who can manage and operate these technologies. Detailed information about the merits and demerits of technology is also mentioned in this paper. Findings: Technology has affected...... the environment on a great scale; in some cases, technology is even replacing human being or use of manpower. So proper counter measures have been mentioned, which can be used to control and limit harmful effect....

  14. Genealogies of Modern Technology

    DEFF Research Database (Denmark)

    Riis, Søren

    2008-01-01

    Does modern technology differ from ancient technology and does it have a unique essence? This twofold question opens one of Martin Heidegger's most influential philosophical inquiries, The Question Concerning Technology. The answer Heidegger offers has inspired various critiques and appraisals from...... a vast number of contemporary scholars of technology.1 Heidegger's answer is traditionally thought to suggest a great difference between ancient and modern technology. However, by re-examining Heidegger's text, it is possible to discover previously ignored or misunderstood lines of thoughts that affirm...... a multi-stable interpretation of the origin of modern technology. In what follows, we shall see how The Question Concerning Technology in fact supports three different genealogies of modern technology...

  15. New Reductive Desulfurization Technology

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ The project for the research of the pulse plasma reductive desulfurization technology undertaken by Huazhong University of Science and Technology recently passed the research achievement appraisal in Wuhan, Hubei province.

  16. Nigerian journal of technology

    African Journals Online (AJOL)

    student1

    sieved into abrasive grains that were used to produce the grinding wheels. These locally ... Nigerian Journal of Technology (NIJOTECH). Vol. 32. No. 2. July 2013, pp. 318 – 324 ..... [10] Salmon, S. C. Modern Grinding Process. Technology.

  17. Neuroanatomy and transgenic technologies

    Science.gov (United States)

    This is a short review that introduces recent advances of neuroanatomy and transgenic technologies. The anatomical complexity of the nervous system remains a subject of tremendous fascination among neuroscientists. In order to tackle this extraordinary complexity, powerful transgenic technologies a...

  18. FY04 Engineering Technology Reports Technology Base

    Energy Technology Data Exchange (ETDEWEB)

    Sharpe, R M

    2005-01-27

    Lawrence Livermore National Laboratory's Engineering Directorate has two primary discretionary avenues for its investment in technologies: the Laboratory Directed Research and Development (LDRD) program and the ''Tech Base'' program. This volume summarizes progress on the projects funded for technology-base efforts in FY2004. The Engineering Technical Reports exemplify Engineering's more than 50-year history of researching and developing (LDRD), and reducing to practice (technology-base) the engineering technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence, and has prepared for this role with a skilled workforce and technical resources. This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply those technologies, or adapt them to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Tech Base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. The objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and

  19. Developments in lubricant technology

    CERN Document Server

    Srivastava, S P

    2014-01-01

    Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

  20. Promoting Renewable Energy Technologies

    DEFF Research Database (Denmark)

    Olsen, Ole Jess; Skytte, Klaus

    % of its annual electricity production. In this paper, we present and discuss the Danish experience as a case of promoting renewable energy technologies. The development path of the two technologies has been very different. Wind power is considered an outright success with fast deployment to decreasing...... technology and its particular context, it is possible to formulate some general principles that can help to create an effective and efficient policy for promoting new renewable energy technologies....

  1. Emerging Technologies for Telemedicine

    Energy Technology Data Exchange (ETDEWEB)

    Minh, Cao Duc [National Agency for Science and Technology Information, Hanoi (Viet Nam); Shimizu, Shuji; Antoku, Yasuaki; Torata, Nobuhiro; Kudo, Kuriko; Okamura, Koji; Nakashima, Naoki; Tanaka, Masao [Kyushu University Hospital, Fukuoka (Japan)

    2012-02-15

    This paper focuses on new technologies that are practically useful for telemedicine. Three representative systems are introduced: a Digital Video Transport System (DVTS), an H.323 compatible videoconferencing system, and Vidyo. Based on some of our experiences, we highlight the advantages and disadvantages of each technology, and point out technologies that are especially targeted at doctors and technicians, so that those interested in using similar technologies can make appropriate choices and achieve their own goals depending on their specific conditions.

  2. Promoting Renewable Energy Technologies

    DEFF Research Database (Denmark)

    Olsen, Ole Jess; Skytte, Klaus

    % of its annual electricity production. In this paper, we present and discuss the Danish experience as a case of promoting renewable energy technologies. The development path of the two technologies has been very different. Wind power is considered an outright success with fast deployment to decreasing...... technology and its particular context, it is possible to formulate some general principles that can help to create an effective and efficient policy for promoting new renewable energy technologies....

  3. SIXTH SENSE TECHNOLOGY

    OpenAIRE

    2014-01-01

    The aim of this thesis was to explain the development of the technology by describing current hot concept in its field. The thesis describes the trend of development and current phase of the technology. The trend was described by explaining the concept of sixth sense technology and the effort that have been applied for this technology. As the concept is new, finding the suitable material related to the subject matter was the challenge for this project. The objective was completed by condu...

  4. Magnetic fusion technology

    CERN Document Server

    Dolan, Thomas J

    2014-01-01

    Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: ? magnet systems, ? plasma heating systems, ? control systems, ? energy conversion systems, ? advanced materials development, ? vacuum systems, ? cryogenic systems, ? plasma diagnostics, ? safety systems, and ? power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.

  5. New Mobile Technologies

    DEFF Research Database (Denmark)

    Tan, Su-En; Henten, Anders

    2006-01-01

    This paper takes a look at Clayton Christensen 's theory of disruptive technologies and how Christensen's theory relates to other innovation theories. It also proposes a new layer of analysis to this theory to better link the technology analysis to the market analysis of any given technology...... product. This layer suggests that complementarity and substitutability are important criteria for technologies to be market disruptions or sustaining changes....

  6. NASA Astrophysics Technology Needs

    Science.gov (United States)

    Stahl, H. Philip

    2012-01-01

    July 2010, NASA Office of Chief Technologist (OCT) initiated an activity to create and maintain a NASA integrated roadmap for 15 key technology areas which recommend an overall technology investment strategy and prioritize NASA?s technology programs to meet NASA?s strategic goals. Science Instruments, Observatories and Sensor Systems(SIOSS) roadmap addresses technology needs to achieve NASA?s highest priority objectives -- not only for the Science Mission Directorate (SMD), but for all of NASA.

  7. Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

  8. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

  9. Enhancing Teaching with Technology.

    Science.gov (United States)

    Pedras, Melvin J.; Oaks, Merrill

    Students who are not educated in the modern advances of our technological society will be ill-prepared for the world of work in the 21st century. It is therefore incumbent upon all educators to modify traditional curriculum to reflect contemporary technology. School technology education programs today are being developed to reflect the needs of…

  10. Conducting a Technology Audit

    Science.gov (United States)

    Flaherty, William

    2011-01-01

    Technology is a critical component in the success of any high-functioning school district, thus it is important that education leaders should examine it closely. Simply put, the purpose of a technology audit is to assess the effectiveness of the technology for administrative or instructional use. Rogers Public Schools in Rogers, Arkansas, recently…

  11. Moralizing Food Technology

    DEFF Research Database (Denmark)

    Coff, Christian Eyde

    2015-01-01

    Food technologies are common on many levels in society and used by both food professionals and consumers. Food technologies are not neutral. They inform and shape the behaviour of people. This paper presents a theoretical framework for analysing the mediating role of food technology and its influ...

  12. The Human Technology

    DEFF Research Database (Denmark)

    Fausing, Bent

    with fundamental human values like intuition, vision and sensing; all the qualities the technology, the industrialisation and rationalisation, or in short modernity, has been criticized for having taken away from human existence. What technology has taken away now comes back through new technology as an aid...

  13. Technological Style is History

    DEFF Research Database (Denmark)

    Blond, Lasse

    The effort to comprehend innovation across cultures and time highlights the importance of the explicating factors external to technology. It becomes relevant to nuance or differentiate the understanding of social and cultural responses to adopted technologies by recognizing that technology shapes...

  14. Advanced manufacturing: Technology diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-12-01

    In this paper we examine how manufacturing technology diffuses rom the developers of technology across national borders to those who do not have the capability or resources to develop advanced technology on their own. None of the wide variety of technology diffusion mechanisms discussed in this paper are new, yet the opportunities to apply these mechanisms are growing. A dramatic increase in technology diffusion occurred over the last decade. The two major trends which probably drive this increase are a worldwide inclination towards ``freer`` markets and diminishing isolation. Technology is most rapidly diffusing from the US In fact, the US is supplying technology for the rest of the world. The value of the technology supplied by the US more than doubled from 1985 to 1992 (see the Introduction for details). History shows us that technology diffusion is inevitable. It is the rates at which technologies diffuse to other countries which can vary considerably. Manufacturers in these countries are increasingly able to absorb technology. Their manufacturing efficiency is expected to progress as technology becomes increasingly available and utilized.

  15. Appropriate technology directories

    Energy Technology Data Exchange (ETDEWEB)

    Frankena, F.

    1984-01-01

    An alphabetical and annotated list of 107 directories of appropriate technologies includes the publications of numerous small firms and residential groups as well as government and industry sources. The references cover neighborhood, village, and community efforts to develop decentralized technologies. Some list private and public funding sources, while others deal with legal, technical, and social aspects of renewable and alternative technologies.

  16. Stretching Your Technology Dollar

    Science.gov (United States)

    Johnson, Doug

    2012-01-01

    A school district technology director offers 10 strategies to help schools make the most of their technology dollar. These include using effective budgeting techniques, taking advantage of the buying power of groups, practicing sustainable technology, purchasing the right tool for the right job, taking advantage of free software, using cloud…

  17. Technology in Education

    Science.gov (United States)

    Roden, Kasi

    2011-01-01

    This paper was written to support a position on using technology in education. The purpose of this study was to support the use of technology in education by synthesizing previous research. A variety of sources including books and journal articles were studied in order to compile an overview of the benefits of using technology in elementary,…

  18. Teaching Information Technology Law

    Science.gov (United States)

    Taylor, M. J.; Jones, R. P.; Haggerty, J.; Gresty, D.

    2009-01-01

    In this paper we discuss an approach to the teaching of information technology law to higher education computing students that attempts to prepare them for professional computing practice. As information technology has become ubiquitous its interactions with the law have become more numerous. Information technology practitioners, and in particular…

  19. Creative Technology and Rap

    Science.gov (United States)

    Ch'ien, Evelyn

    2011-01-01

    This paper describes how a linguistic form, rap, can evolve in tandem with technological advances and manifest human-machine creativity. Rather than assuming that the interplay between machines and technology makes humans robotic or machine-like, the paper explores how the pressure of executing artistic visions using technology can drive…

  20. Biometric technology overview

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Biometrics was identified as one amongst 10 emerging technologies which would change the world in the twenty-first century. Components and processes of biometric system and the relevant technologies are explained in this article. Examples of biometric applications and trends of biometric research, together with industry development,are introduced, which illustrate the challenges and opportunities of this technology.

  1. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...... and technology factors in organizations. Theoretical implications call for a design-oriented view of technology and process alignment....

  2. New Technologies in Mathematics.

    Science.gov (United States)

    Sarmiento, Jorge

    An understanding of past technological advancements can help educators understand the influence of new technologies in education. Inventions such as the abacus, logarithms, the slide rule, the calculating machine, computers, and electronic calculators have all found their place in mathematics education. While new technologies can be very useful,…

  3. Mineral Processing Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-09-01

    This document represents the roadmap for Processing Technology Research in the US Mining Industry. It was developed based on the results of a Processing Technology Roadmap Workshop sponsored by the National Mining Association in conjunction with the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held January 24 - 25, 2000.

  4. Sharing Science and Technology.

    Science.gov (United States)

    Morgan, Robert P.

    1983-01-01

    Defining development as some combination of improving the standard of living and quality of life, meeting basic needs, and increasing per capita gross national product, this article discusses the role science and technology can play in developing countries. Considers technology transfer, appropriate technology, and other issues. (JN)

  5. Stretching Your Technology Dollar

    Science.gov (United States)

    Johnson, Doug

    2012-01-01

    A school district technology director offers 10 strategies to help schools make the most of their technology dollar. These include using effective budgeting techniques, taking advantage of the buying power of groups, practicing sustainable technology, purchasing the right tool for the right job, taking advantage of free software, using cloud…

  6. Selecting Security Technology Providers

    Science.gov (United States)

    Schneider, Tod

    2009-01-01

    The world of security technology holds great promise, but it is fraught with opportunities for expensive missteps and misapplications. The quality of the security technology consultants and system integrators one uses will have a direct bearing on how well his school masters this complex subject. Security technology consultants help determine…

  7. Teaching with Technology

    Science.gov (United States)

    Attard, Catherine

    2011-01-01

    New technologies continue to change every aspect of home, life and work: the way people communicate, calculate, analyse, shop, make presentations and socialise. "The Australian Curriculum" acknowledges the importance of teaching and learning with technology by including the use of information and communication technology (ICT) as one of…

  8. Education Technology Success Stories

    Science.gov (United States)

    West, Darrell M.; Bleiberg, Joshua

    2013-01-01

    Advances in technology are enabling dramatic changes in education content, delivery, and accessibility. Throughout history, new technologies have facilitated the exponential growth of human knowledge. In the early twentieth century, the focus was on the use of radios in education. But since then, innovators have seen technology as a way to improve…

  9. Creative Technology and Rap

    Science.gov (United States)

    Ch'ien, Evelyn

    2011-01-01

    This paper describes how a linguistic form, rap, can evolve in tandem with technological advances and manifest human-machine creativity. Rather than assuming that the interplay between machines and technology makes humans robotic or machine-like, the paper explores how the pressure of executing artistic visions using technology can drive…

  10. Technology Assessment Report: Aqueous Sludge Gasification Technologies

    Science.gov (United States)

    The study reveals that sludge gasification is a potentially suitable alternative to conventional sludge handling and disposal methods. However, very few commercial operations are in existence. The limited pilot, demonstration or commercial application of gasification technology t...

  11. Technology Matters - When new technology reshape innovation

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    Management of innovation is an important issue for firms and being good at this may be the deciding difference between death and survival. This paper ar-gues, based on 12 case studies, that new technology influence the innovative ca-pability of firms and disturbingly the process appears...... the firm, which over time becomes a source of innovation. However, through adoption of this new technology firms engage in a mu-tual learning and forming process where the firm learn by using the new technol-ogy. When learning, the firm and the new technology is mutually formed as the firm tries to adopt...... not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...

  12. Applied Semantic Web Technologies

    CERN Document Server

    Sugumaran, Vijayan

    2011-01-01

    The rapid advancement of semantic web technologies, along with the fact that they are at various levels of maturity, has left many practitioners confused about the current state of these technologies. Focusing on the most mature technologies, Applied Semantic Web Technologies integrates theory with case studies to illustrate the history, current state, and future direction of the semantic web. It maintains an emphasis on real-world applications and examines the technical and practical issues related to the use of semantic technologies in intelligent information management. The book starts with

  13. Coagulation of fines in fluorite froth flotation; Coagulacion de finos en la flotacion de la fluorita

    Energy Technology Data Exchange (ETDEWEB)

    Sarquis, P. E.; Gonzalez, M.; Moyano, A.; Bazan, V.

    2011-07-01

    Fluorite, a valuable mineral in the metallurgical industry, can be found together with silicates, carbonates and oxides in ore deposits. Commercial concentrates with more than 95 % of CaF{sub 2} are obtained processing the mineral in flotation plants and using oleic acid as fluorite collector. Depressor reagents such as sodium silicate, tannin and sodium carbonate are commonly employed to allow the oleic acid selective performance. These reagents cause a dispersant effect separating the solid-liquid solution on tailing plants. Fine particles in the recovered water enter the circuit and affect the flotation efficiency. The effect of coagulant ions was studied as a method to clarify the returned water. The problem of the presence of these ions is related to its reactions with the collector by the formation of compounds and possibly on the selectivity. Variable quantities of Al{sup 3}+, Fe{sup 3}+ and Ca{sup 2}+ ions were added to the flotation to evaluate its effect on the fluorite recovery, in the selectivity and in solids content in recirculation water. Results show that some ions fail to improve water quality and are detrimental to flotation. On the contrary, some ions contribute to reduce fine content in suspension. Therefore, although there is a recovery reduction, such effect can be counteracted increasing the collector consumption a little. (Author) 21 refs.

  14. Extraction of a Low Grade Zinc Ore using Gravity and Froth Flotation ...

    African Journals Online (AJOL)

    ADOWIE PERE

    used to leach base metals from sulphide concentrated with metal ... (1993). The flotation agents are known as collectors, ... lime, oleic acid, propanol, turpentine etc.) of an ore ... using Camry 25k5055 digital weighing balance. Grain Size ...

  15. Froth across the Universe Dynamics and Stochastic Geometry of the Cosmic Foam

    NARCIS (Netherlands)

    Weygaert, R. van de

    2002-01-01

    Abstract: A review on the properties and dynamical origin and nature of the cosmic foam, the tenuous space-filling frothy network permeating the interior of the Universe. We discuss the properties of this striking and intriguing pattern, describing its observational appearance, and seeking to elucid

  16. ON THE USE OF FROTH FLOTATION IN THE RECOVERY OF Bacillus sphaericus SPORES

    Directory of Open Access Journals (Sweden)

    E.M. RIOS

    1997-06-01

    Full Text Available Abstract - The recovery of Bacillus sphaericus strain 2362 spores from fermented medium by batch flotation was tested under different conditions. Flotation kinetic studies were performed at 800 rpm and 3 l air/min. The pH values were adjusted at the following set of values: 5.0, 7.0 and 9.0. The results showed that the spore removal rate is influenced by the pH value. At pH equal to 5.0 we observe an adverse effect on the spore concentrate obtention. In this situation the maximum value of the concentration factor was 1.4 when the recuperation percentage was 99%. At pH equal to 7.0 the concentration factor reached the highest value, 7.0, but the recuperation percentage stayed around 96%. Field experiments with the floated material demonstrated that its larvicide activity was sufficient to keep a Culex quinquefasciatus larvae population under control at in a breeding site, during 3 months with 2 applications

  17. Combustion characteristics of Athabasca froth treatment tailings in a simulated fluidilized bed

    Energy Technology Data Exchange (ETDEWEB)

    Esmaeili, P.; Ghosh, M.; Speirs, B. C. [Imperial Oil Resources (Canada); Leon, M. A.; Rao, S.; Dutta, A.; Basu, P. [Greenfield Research Inc. (Canada)

    2011-07-01

    In surface-mined oil sands, a stream of water, asphaltenes, solids and residual bitumen/solvent, known as PFT tailings, is created during the bitumen production process. The aim of this study was to investigate the use of this PFT tailings stream as a fuel source for combustion in a fluidized bed for energy recovery. To do so, physical and fluidization characteristics of the fuel as well as combustion kinetics were assessed through laboratory analysis. In addition, the fuel's combustion characteristics were investigated through experiments in a quartz wool matrix tubular reactor and theoretical calculations at various moisture contents. Results showed that this fuel can be burned in a fluidized bed with a reactivity comparable to that of coal samples. This research found that PFT tailings could be used to generate energy during disposal but further work will have to be undertaken in a hot CFB combustor to confirm this.

  18. Technology reviews: Glazing systems

    Energy Technology Data Exchange (ETDEWEB)

    Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

    1992-09-01

    We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology; determine the performance range of available technologies; identify the most promising technologies and promising trends in technology advances; examine market forces and market trends; and develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fag into that class.

  19. Technology reviews: Shading systems

    Energy Technology Data Exchange (ETDEWEB)

    Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

    1992-09-01

    We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

  20. Technology-Use Mediation

    DEFF Research Database (Denmark)

    Bansler, Jørgen P.; Havn, Erling C.

    2003-01-01

    This study analyzes how a group of ‘mediators’ in a large, multinational company adapted a computer-mediated communication technology (a ‘virtual workspace’) to the organizational context (and vice versa) by modifying features of the technology, providing ongoing support for users, and promoting...... of technology-use mediation is more complex and indeterminate than earlier literature suggests. In particular, we want to draw attention to the fact that advanced computer-mediated communication technologies are equivocal and that technology-use mediation consequently requires ongoing sensemaking (Weick 1995)....... appropriate conventions of use. Our findings corroborate earlier research on technology-use mediation, which suggests that such mediators can exert considerable influence on how a particular technology will be established and used in an organization. However, this study also indicates that the process...

  1. Technology and Global Change

    Science.gov (United States)

    Grübler, Arnulf

    2003-10-01

    Technology and Global Change describes how technology has shaped society and the environment over the last 200 years. Technology has led us from the farm to the factory to the internet, and its impacts are now global. Technology has eliminated many problems, but has added many others (ranging from urban smog to the ozone hole to global warming). This book is the first to give a comprehensive description of the causes and impacts of technological change and how they relate to global environmental change. Written for specialists and nonspecialists alike, it will be useful for researchers and professors, as a textbook for graduate students, for people engaged in long-term policy planning in industry (strategic planning departments) and government (R & D and technology ministries, environment ministries), for environmental activists (NGOs), and for the wider public interested in history, technology, or environmental issues.

  2. Technology Museums in Denmark

    DEFF Research Database (Denmark)

    Søndergaard, Morten Karnøe

    2012-01-01

    This article presents an exhibit review of some of the major technology museums in Denmark. First comes an introduction to the Danish museum ”landscape”. Second a total of six museums and their technology focused exhibits are presented. Among the museums are the Fisheries and Maritime Museum...... in Esbjerg, housing one of the most impressive and representative exhibitions on the technology behind the strong Danish maritime sector. Another museum being mentioned is the Energy Museum, which covers the background for some of the major breakthroughs performed in Denmark within this area; particularly...... within wind power technology. Finally special attention is devoted to the Danish Technological Museum. A museum which is the oldest and most elaborate of all the technology museums. The museum covers virtually every technological breakthrough with any relevance in a Danish section, with a special focus...

  3. Technologies as incarnated action

    DEFF Research Database (Denmark)

    Schraube, Ernst

    Contemporary conceptualizations of technology go beyond the traditional interpretation of created things as simply neutral means to an end. They theorize technologies as objects, which embody regimes of power (the theory of technological politics), or scripts (actor-network theory), or values...... (critical theory of technology), or patriarchal thought structures (feminist theories of technology). As helpful as these theories may be to understand the inner relationship between the technosphere and human life, the way in which the life of the individuals in the world of things is imagined remains...... vague and imprecise. In this paper I will argue for a social theory of technology, which includes the subjective and intersubjective implications of technological artifacts. I will show how acting has shifted from the province of human subjects to the sphere of work and products. The created things now...

  4. Technology Empowerment: Security Challenges.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Drake Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Backus, George A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Wendell [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nelson, Thomas R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Skocypec, Russell D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    Technology empowerment” means that innovation is increasingly accessible to ordinary people of limited means. As powerful technologies become more affordable and accessible, and as people are increasingly connected around the world, ordinary people are empowered to participate in the process of innovation and share the fruits of collaborative innovation. This annotated briefing describes technology empowerment and focuses on how empowerment may create challenges to U.S. national security. U.S. defense research as a share of global innovation has dwindled in recent years. With technology empowerment, the role of U.S. defense research is likely to shrink even further while technology empowerment will continue to increase the speed of innovation. To avoid falling too far behind potential technology threats to U.S. national security, U.S. national security institutions will need to adopt many of the tools of technology empowerment.

  5. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    2007-11-02

    This is Japan Report with Science and Technology. It contains the issues with different topics on biotecnology , defense industry, nuclear engineering, Marine technology, science and technology policy.

  6. Technology '90

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

  7. Technology transfer 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    This document, Technology Transfer 94, is intended to communicate that there are many opportunities available to US industry and academic institutions to work with DOE and its laboratories and facilities in the vital activity of improving technology transfer to meet national needs. It has seven major sections: Introduction, Technology Transfer Activities, Access to Laboratories and Facilities, Laboratories and Facilities, DOE Office, Technologies, and an Index. Technology Transfer Activities highlights DOE`s recent developments in technology transfer and describes plans for the future. Access to Laboratories and Facilities describes the many avenues for cooperative interaction between DOE laboratories or facilities and industry, academia, and other government agencies. Laboratories and Facilities profiles the DOE laboratories and facilities involved in technology transfer and presents information on their missions, programs, expertise, facilities, and equipment, along with data on whom to contact for additional information on technology transfer. DOE Offices summarizes the major research and development programs within DOE. It also contains information on how to access DOE scientific and technical information. Technologies provides descriptions of some of the new technologies developed at DOE laboratories and facilities.

  8. Technology and teen drivers.

    Science.gov (United States)

    Lee, John D

    2007-01-01

    The rapid evolution of computing, communication, and sensor technology is likely to affect young drivers more than others. The distraction potential of infotainment technology stresses the same vulnerabilities that already lead young drivers to crash more frequently than other drivers. Cell phones, text messaging, MP3 players, and other nomadic devices all present a threat because young drivers may lack the spare attentional capacity for vehicle control and the ability to anticipate and manage hazards. Moreover, young drivers are likely to be the first and most aggressive users of new technology. Fortunately, emerging technology can also support safe driving. Electronic stability control, collision avoidance systems, intelligent speed adaptation, and vehicle tracking systems can all help mitigate the threats to young drivers. However, technology alone is unlikely to make young drivers safer. One promising approach to tailoring technology to teen drivers is to extend proven methods for enhancing young driver safety. The success of graduated drivers license programs (GDL) and the impressive safety benefit of supervised driving suggest ways of tailoring technology to the needs of young drivers. To anticipate the effects of technology on teen driving it may be useful to draw an analogy between the effects of passengers and the effects of technology. Technology can act as a teen passenger and undermine safety or it can act as an adult passenger and enhance safety. Rapidly developing technology may have particularly large effects on teen drivers. To maximize the positive effects and minimize the negative effects will require a broad range of industries to work together. Ideally, vehicle manufacturers would work with infotainment providers, insurance companies, and policy makers to craft new technologies so that they accommodate the needs of young drivers. Without such collaboration young drivers will face even greater challenges to their safety as new technologies emerge.

  9. Advanced development of fine coal desulfurization and recovery technology. Quarterly technical progress report, October 1, 1976--December 31, 1976. [53 references

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, R.W.; Wheelock, T.D.

    1977-02-01

    The improvement and technical development of promising methods for desulfurizing and recovering fine coal underway includes froth flotation, selective oil agglomeration, pelletization, and a chemical desulfurization process which involves leaching fine coal with a hot dilute solution of sodium carbonate containing dissolved oxygen under pressure. A preliminary assessment of the state of the art and review of the technical literature has been made. Equipment and apparatus have been assembled for small-scale laboratory experiments in froth flotation, oil agglomeration and chemical desulfurization. Preliminary froth flotation tests have been carried out on an Iowa coal to establish baseline data. Quite unexpectedly these tests indicated that aluminum nitrate may be an activator for coal because it served to increase the recovery of coal. Several potential flotation depressants for pyrite have been screened by measurement at the zeta potential and floatability of pyrite or coal in aqueous suspensions containing the potential depressants. The following reagents show some promise as pyrite depressants: ferric chloride, sodium cyanide, ammonium thiocyanate, and the disodium salt of ethylenediaminetetraacetic acid. Preliminary plans have been prepared for a continuous flow bench-scale system to demonstrate the process. This system will include equipment for grinding and pretreating the coal as well as equipment for demonstrating froth flotation, selective oil agglomeration and pelletization. An investigation of coal microstructure as it relates to coal beneficiation methods has also been initiated. The distribution of various forms of pyrite by size and crystal structure has been determined for two cannel samples of coal through application of scanning electron microscope techniques.

  10. [Earth Science Technology Office's Computational Technologies Project

    Science.gov (United States)

    Fischer, James (Technical Monitor); Merkey, Phillip

    2005-01-01

    This grant supported the effort to characterize the problem domain of the Earth Science Technology Office's Computational Technologies Project, to engage the Beowulf Cluster Computing Community as well as the High Performance Computing Research Community so that we can predict the applicability of said technologies to the scientific community represented by the CT project and formulate long term strategies to provide the computational resources necessary to attain the anticipated scientific objectives of the CT project. Specifically, the goal of the evaluation effort is to use the information gathered over the course of the Round-3 investigations to quantify the trends in scientific expectations, the algorithmic requirements and capabilities of high-performance computers to satisfy this anticipated need.

  11. Technology Transfer and Commercialization

    Science.gov (United States)

    Martin, Katherine; Chapman, Diane; Giffith, Melanie; Molnar, Darwin

    2001-01-01

    During concurrent sessions for Materials and Structures for High Performance and Emissions Reduction, the UEET Intellectual Property Officer and the Technology Commercialization Specialist will discuss the UEET Technology Transfer and Commercialization goals and efforts. This will include a review of the Technology Commercialization Plan for UEET and what UEET personnel are asked to do to further the goals of the Plan. The major goal of the Plan is to define methods for how UEET assets can best be infused into industry. The National Technology Transfer Center will conduct a summary of its efforts in assessing UEET technologies in the areas of materials and emissions reduction for commercial potential. NTTC is assisting us in completing an inventory and prioritization by commercialization potential. This will result in increased exposure of UEET capabilities to the private sector. The session will include audience solicitation of additional commercializable technologies.

  12. Designing Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    and the design process, in ethical and society-related concerns, and in evaluating how designs fulfill needs and solve problems. Designing Human Technologies subscribes to a broad technology concept including information and communication, mobile, environmental/sustainable and energy technologies......, the Humanities, and Social Science. The initiative broadens the perspective of IS and recognize reflections on aesthetics, ethics, values, connections to politics, and strategies for enabling a better future as legitimate parts of the research agenda. Designing Human Technologies is a design-oriented Strategic...... a shared interdisciplinary research and educational collaboration. As a creative research initiative it focuses on change and innovative thinking. The innovativeness is a result of the strongly interdisciplinary perspective which is at the heart of Designing Human Technologies. Designing Human Technologies...

  13. Implementation of Emerging Technologies

    DEFF Research Database (Denmark)

    Barba, F. J.; Orlien, Vibeke; Mota, Maria J.

    2016-01-01

    resources. Lastly, studies with specific examples of the implementation of these novel processing technologies in food industry are described, focusing on the application of high-pressure processing and pulsed electric fields to orange juice, milk, and oysters. Higher implementation costs were observed...... for the emerging processing technologies compared to the conventional processing technologies, which can be explained by the fact that the industrial application of these novel technologies is still under development. In the future the costs are expected to reduce with further technology advances......Novel processing technologies have been gaining interest among food researchers due to their lower impact on nutritional and sensory properties of the products compared to the conventional thermal techniques. In this chapter some of the most well-studied (eg, high-pressure processing, pulsed...

  14. Sensor technology foresight

    DEFF Research Database (Denmark)

    Andersen, Per Dannemand; Jørgensen, Birte Holst; Rasmussen, Birgitte

    2001-01-01

    The Sensor Technology Center A/S (STC) in co-operation with Risoe National Laboratory has carried out a sensor technology foresight in order to strengthen a strategic outlook on sensor technology. The technology foresight (with a timeframe of 2000 to2015) has been performed in the period October...... 2000 - September 2001. The conclusions of the sensor technology report are based on 1) a scanning of existing forward looking literature on sensor technology, 2) a number of workshops with Danish andinternational participants and 3) an international survey with 174 respondents. Half of the respondents...... came from universities and other research institutes, and approximately one-third came from industry. The study has analysed six types of sensors(covering 13 sub-types) and, in addition, a number of systemic issues. All three sources of information indicate the same pattern regarding future...

  15. Technology Transfer and Commercialization

    Science.gov (United States)

    Martin, Katherine; Chapman, Diane; Giffith, Melanie; Molnar, Darwin

    2001-01-01

    During concurrent sessions for Materials and Structures for High Performance and Emissions Reduction, the UEET Intellectual Property Officer and the Technology Commercialization Specialist will discuss the UEET Technology Transfer and Commercialization goals and efforts. This will include a review of the Technology Commercialization Plan for UEET and what UEET personnel are asked to do to further the goals of the Plan. The major goal of the Plan is to define methods for how UEET assets can best be infused into industry. The National Technology Transfer Center will conduct a summary of its efforts in assessing UEET technologies in the areas of materials and emissions reduction for commercial potential. NTTC is assisting us in completing an inventory and prioritization by commercialization potential. This will result in increased exposure of UEET capabilities to the private sector. The session will include audience solicitation of additional commercializable technologies.

  16. Geothermal innovative technologies catalog

    Energy Technology Data Exchange (ETDEWEB)

    Kenkeremath, D. (ed.)

    1988-09-01

    The technology items in this report were selected on the basis of technological readiness and applicability to current technology transfer thrusts. The items include technologies that are considered to be within 2 to 3 years of being transferred. While the catalog does not profess to be entirely complete, it does represent an initial attempt at archiving innovative geothermal technologies with ample room for additions as they occur. The catalog itself is divided into five major functional areas: Exploration; Drilling, Well Completion, and Reservoir Production; Materials and Brine Chemistry; Direct Use; and Economics. Within these major divisions are sub-categories identifying specific types of technological advances: Hardware; Software; Data Base; Process/Procedure; Test Facility; and Handbook.

  17. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  18. NAND flash memory technologies

    CERN Document Server

    Aritome, Seiichi

    2016-01-01

    This book discusses basic and advanced NAND flash memory technologies, including the principle of NAND flash, memory cell technologies, multi-bits cell technologies, scaling challenges of memory cell, reliability, and 3-dimensional cell as the future technology. Chapter 1 describes the background and early history of NAND flash. The basic device structures and operations are described in Chapter 2. Next, the author discusses the memory cell technologies focused on scaling in Chapter 3, and introduces the advanced operations for multi-level cells in Chapter 4. The physical limitations for scaling are examined in Chapter 5, and Chapter 6 describes the reliability of NAND flash memory. Chapter 7 examines 3-dimensional (3D) NAND flash memory cells and discusses the pros and cons in structure, process, operations, scalability, and performance. In Chapter 8, challenges of 3D NAND flash memory are dis ussed. Finally, in Chapter 9, the author summarizes and describes the prospect of technologies and market for the fu...

  19. Emerging and Disruptive Technologies

    Science.gov (United States)

    2016-01-01

    Several emerging or disruptive technologies can be identified that might, at some point in the future, displace established laboratory medicine technologies and practices. These include increased automation in the form of robots, 3-D printing, technology convergence (e.g., plug-in glucose meters for smart phones), new point-of-care technologies (e.g., contact lenses with sensors, digital and wireless enabled pregnancy tests) and testing locations (e.g., Retail Health Clinics, new at-home testing formats), new types of specimens (e.g., cell free DNA), big biology/data (e.g., million genome projects), and new regulations (e.g., for laboratory developed tests). In addition, there are many emerging technologies (e.g., planar arrays, mass spectrometry) that might find even broader application in the future and therefore also disrupt current practice. One interesting source of disruptive technology may prove to be the Qualcomm Tricorder XPrize, currently in its final stages. PMID:27683538

  20. Wibree: wireless communication technology

    Science.gov (United States)

    Fernandes e Fizardo, Trima Piedade

    2011-12-01

    Nowadays everywhere we come across electronic devices and now the world has become entirely mobile with so many new electronic equipments. The number of computing and telecommunications devices is increasing and consequently the focus on how to connect them to each other. The usual solution is to connect the device with cables or using infra red light to make file transfer and synchronizations possible but infrared light requires line of sight. To solve these problems a new technology,Wibree radio technology complements other local connectivity technologies, consuming only a fraction of the power compared to other radio technologies, enabling smaller and less costly implementations and being easy to integrate with Bluetooth solutions, Furthermore it can be also used to enable communication between several units such as small radio LANs.This paper focuses on why this technology has got large attention although there are pro's and con's with respect to other technologies.

  1. Emerging and Disruptive Technologies.

    Science.gov (United States)

    Kricka, Larry J

    2016-08-01

    Several emerging or disruptive technologies can be identified that might, at some point in the future, displace established laboratory medicine technologies and practices. These include increased automation in the form of robots, 3-D printing, technology convergence (e.g., plug-in glucose meters for smart phones), new point-of-care technologies (e.g., contact lenses with sensors, digital and wireless enabled pregnancy tests) and testing locations (e.g., Retail Health Clinics, new at-home testing formats), new types of specimens (e.g., cell free DNA), big biology/data (e.g., million genome projects), and new regulations (e.g., for laboratory developed tests). In addition, there are many emerging technologies (e.g., planar arrays, mass spectrometry) that might find even broader application in the future and therefore also disrupt current practice. One interesting source of disruptive technology may prove to be the Qualcomm Tricorder XPrize, currently in its final stages.

  2. Wireless communication technology NFC

    OpenAIRE

    MÁROVÁ, Kateřina

    2014-01-01

    Aim of this bachelor thesis is to handle the issue of new wireless communication technology NFC (Near Field Communication) including a comparison of advantages and disadvantages of NFC with other wireless technologies (Bluetooth, Wi-Fi, etc.). NFC is a technology for wireless communications between different electronic devices, one of which is typically a mobile phone. Near Field Communication allows wireless communication at very short distance by approaching or enclosing two devices and can...

  3. Digital Sensor Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  4. SNP genotyping technologies

    DEFF Research Database (Denmark)

    Studer, Bruno; Kölliker, Roland

    2013-01-01

    for this is the availability of high-throughput platforms for multiplexed SNP genotyping. Advancements in these technologies have enabled increased flexibility and throughput, allowing for the generation of adequate SNP marker data at very competitive cost per data point.......In the recent years, single nucleotide polymorphism (SNP) markers have emerged as the marker technology of choice for plant genetics and breeding applications. Besides the efficient technologies available for SNP discovery even in complex genomes, one of the main reasons...

  5. SNP genotyping technologies

    DEFF Research Database (Denmark)

    Studer, Bruno; Kölliker, Roland

    2013-01-01

    In the recent years, single nucleotide polymorphism (SNP) markers have emerged as the marker technology of choice for plant genetics and breeding applications. Besides the efficient technologies available for SNP discovery even in complex genomes, one of the main reasons...... for this is the availability of high-throughput platforms for multiplexed SNP genotyping. Advancements in these technologies have enabled increased flexibility and throughput, allowing for the generation of adequate SNP marker data at very competitive cost per data point....

  6. Software Architecture Technology Initiative

    Science.gov (United States)

    2008-04-01

    2008 Carnegie Mellon University 2008 PLS March 2008 © 2008 Carnegie Mellon University Software Architecture Technology Initiative SATURN 2008...SUBTITLE Software Architecture Technology Initiative 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...SUPPLEMENTARY NOTES presented at the SEI Software Architecture Technology User Network (SATURN) Workshop, 30 Apr ? 1 May 2008, Pittsburgh, PA. 14

  7. Software Partitioning Technologies

    Science.gov (United States)

    2001-05-29

    1 Software Partitioning Technologies Tim Skutt Smiths Aerospace 3290 Patterson Ave. SE Grand Rapids, MI 49512-1991 (616) 241-8645 skutt_timothy...Limitation of Abstract UU Number of Pages 12 2 Agenda n Software Partitioning Overview n Smiths Software Partitioning Technology n Software Partitioning...Partition Level OS Core Module Level OS Timers MMU I/O API Layer Partitioning Services 6 Smiths Software Partitioning Technology n Smiths has developed

  8. Trends in Technology Use

    OpenAIRE

    Florin Frant

    2009-01-01

    This study aims to investigate the relationship between the use of technology, working conditions and the health and well-being of workers in Europe. As it is known that characteristics of work organisation may reinforce or impair both positive and negative effects of technology use, the role of these characteristics is also considered in this study. The research will provide an insight into the trends and changes in technology use and working conditions in European count...

  9. Mixed plastics recycling technology

    CERN Document Server

    Hegberg, Bruce

    1995-01-01

    Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.

  10. Advanced Surface Technology

    DEFF Research Database (Denmark)

    Møller, Per; Nielsen, Lars Pleht

    This new significant book on advanced modern surface technology in all its variations, is aimed at both teaching at engineering schools and practical application in industry. The work covers all the significant aspects of modern surface technology and also describes how new advanced techniques make......, nitriding, carbonitriding, and many other lesser-known thermochemical processes used for solving technological problems. The book is richly illustrated with pictures and figures showing how the technology creates new innovative solutions for industry and how surfaces are becoming integral to the function...

  11. Explosive Technology Group

    Data.gov (United States)

    Federal Laboratory Consortium — The Explosive Technology Group (ETG) provides diverse technical expertise and an agile, integrated approach to solve complex challenges for all classes of energetic...

  12. Active ageing technologies

    DEFF Research Database (Denmark)

    Lassen, Aske Juul

    the elderly. As part of this rearticulation of old age, many new technologies take form. This paper uses a wide concept of technologies (devices, regimes, strategies and ways of doing) and argues that technologies form active aging subjectivities, and on the other hand, that these subjectivities...... ‘sites of active aging’ in Denmark. By presenting three technologies of active aging (billiards at an activity center for elderly persons, dancing tiles for rehabilitation after falls and an online fitness community for elderly persons) the paper suggests that active aging is more than regimes...

  13. World Technology Usage Lags

    OpenAIRE

    Diego A. Comin; Bart Hobijn; Emilie Rovito

    2006-01-01

    We present evidence on the differences in the intensity with which ten major technologies are used in 185 countries across the world. We do so by calculating how many years ago these technologies were used in the U.S. at the same intensity as they are used in the countries in our sample. We denote these time lags as technology usage lags and compare them with lags in real GDP per capita. We find that (i) technology usage lags are large, often comparable to lags in real GDP per capita, (ii) us...

  14. Health care technology assessment

    Science.gov (United States)

    Goodman, Clifford

    1994-12-01

    The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

  15. Distributed Energy Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Distributed Energy Technologies Laboratory (DETL) is an extension of the power electronics testing capabilities of the Photovoltaic System Evaluation Laboratory...

  16. Acoustic Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory contains an electro-magnetic worldwide data collection and field measurement capability in the area of acoustic technology. Outfitted by NASA Langley...

  17. Solar Cooker Technological Change

    DEFF Research Database (Denmark)

    Ahmad, Bashir

    1997-01-01

    The challenges which solar cooking technology is facing right now is discussed. Based on a field study in Madras and Gujarat, it is asserted that there is an important incompatibility between the technology and the every day real-life conditions of the "users" of solar cooker. An evaluation report...... on a solar cooker technology in Burkina Faso supports the findings of the study. It is concluded that the users and other important actors have to be incorporated in the technological development process of solar cookers in the future....

  18. SCIENTIFIC AND TECHNOLOGICAL INNOVATION

    Directory of Open Access Journals (Sweden)

    Gabriel I. NASTASE

    2011-11-01

    Full Text Available Today, science and, accordingly, scientific research is widely recognized as the main driving force of production and source of innovation and technology transfer. There are many definitions in this regard that seek to express the concept of scientific research, experimental development (engineering and technical progress. Practically in the developed countries the phenomenon of innovation is being analyzed in relation to the concept of technology transfer, based on the experience and knowledge in science and technology. Innovation has to be addressed systematically, it involving: science, technology, financial and economic principles, management.

  19. Moralizing Food Technology

    DEFF Research Database (Denmark)

    Coff, Christian Eyde

    2015-01-01

    Food technologies are common on many levels in society and used by both food professionals and consumers. Food technologies are not neutral. They inform and shape the behaviour of people. This paper presents a theoretical framework for analysing the mediating role of food technology and its...... influence on food ethics. Post-phenomenology and the idea of a technologically mediated morality are central theoretical approaches. Four elements are included in the analytical framework: perception, interpretation, intentionality, and mediated morality. The framework is applied to two cases; food safety...

  20. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  1. Industrial communication technology handbook

    CERN Document Server

    Zurawski, Richard

    2005-01-01

    The Industrial Communication Technology Handbook focuses on current and newly emerging communication technologies and systems that are evolving in response to the needs of industry and the demands of industry-led consortia and organizations.Organized into two parts, the text first summarizes the basics of data communications and IP networks, then presents a comprehensive overview of the field of industrial communications. This book extensively covers the areas of fieldbus technology, industrial Ethernet and real-time extensions, wireless and mobile technologies in industrial applications, the

  2. Technology Roadmaps: Cement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    To support its roadmap work focusing on key technologies for emissions reductions, the International Energy Agency (IEA) also investigated one particular industry: cement. Cement production includes technologies that are both specific to this industry and those that are shared with other industries (e.g., grinding, fuel preparation, combustion, crushing, transport). An industry specific roadmap provides an effective mechanism to bring together several technology options. It outlines the potential for technological advancement for emissions reductions in one industry, as well as potential cross-industry collaboration.

  3. Technology for Boundaries

    DEFF Research Database (Denmark)

    Bødker, Susanne; Kristensen, Jannie Friis; Nielsen, Christina

    2003-01-01

    This paper presents a study of an organisation, which is undergoing a process transforming organisational and technological boundaries. In particular, we shall look at three kinds of boundaries: the work to maintain and change the boundary between the organisation and its customers; boundaries.......After analysing the history and the current boundary work, the paper will propose new technological support for boundary work. In particular the paper will suggest means of supporting boundaries when these are productive and for changing boundaries when this seems more appropriate. In total, flexible technologies...... seem a core issue when dealing with technology for boundaries....

  4. Future Information Technology

    CERN Document Server

    Stojmenovic, Ivan; Choi, Min; Xhafa, Fatos; FutureTech 2013

    2014-01-01

    Future technology information technology stands for all of continuously evolving and converging information technologies, including digital convergence, multimedia convergence, intelligent applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, user experience and HCI, security and trust computing and so on, for satisfying our ever-changing needs. In past twenty five years or so, Information Technology (IT) influenced and changed every aspect of our lives and our cultures. These proceedings foster the dissemination of state-of-the-art research in all future IT areas, including their models, services, and novel applications associated with their utilization.

  5. The Next Technology Revolution - Nano Electronic Technology

    Science.gov (United States)

    Turlik, Iwona

    2004-03-01

    Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

  6. PCP IMMUMOASSAY TECHNOLOGIES - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Three enzyme-linked immunosorbent assay technologies for pentachlorophenol (PCP) testing in soil and water were evaluated. Penta RISc Test Systems (formerly ENSYS, Inc.), EnviroGard™ PCP Immunoassay Test Kit (Millipore Corp.), and Pentachlorophenol RaPID Assay (formerly Ohmicron ...

  7. Robotics Technology Crosscutting Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  8. Biosensor technology: technology push versus market pull.

    Science.gov (United States)

    Luong, John H T; Male, Keith B; Glennon, Jeremy D

    2008-01-01

    Biosensor technology is based on a specific biological recognition element in combination with a transducer for signal processing. Since its inception, biosensors have been expected to play a significant analytical role in medicine, agriculture, food safety, homeland security, environmental and industrial monitoring. However, the commercialization of biosensor technology has significantly lagged behind the research output as reflected by a plethora of publications and patenting activities. The rationale behind the slow and limited technology transfer could be attributed to cost considerations and some key technical barriers. Analytical chemistry has changed considerably, driven by automation, miniaturization, and system integration with high throughput for multiple tasks. Such requirements pose a great challenge in biosensor technology which is often designed to detect one single or a few target analytes. Successful biosensors must be versatile to support interchangeable biorecognition elements, and in addition miniaturization must be feasible to allow automation for parallel sensing with ease of operation at a competitive cost. A significant upfront investment in research and development is a prerequisite in the commercialization of biosensors. The progress in such endeavors is incremental with limited success, thus, the market entry for a new venture is very difficult unless a niche product can be developed with a considerable market volume.

  9. Technology Transfer and Technology Transfer Intermediaries

    Science.gov (United States)

    Bauer, Stephen M.; Flagg, Jennifer L.

    2010-01-01

    A standard and comprehensive model is needed to evaluate and compare technology transfer systems and the stakeholders within these systems. The principle systems considered include federal laboratories, U.S. universities, the rehabilitation engineering research centers (RERCs), and large small business innovation research programs. An earlier…

  10. Emerging Technologies - Capturing Innovation with Technology

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-12-01

    ET team research results are critical to achieving 50% energy savings across U.S. buildings within the next two decades. The ET team focuses on supporting research, development, and tech-to-market opportunities of high impact technologies, or those that demonstrate potential for achieving significant energy savings cost effectively.

  11. Digital Actuator Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ken Thomas; Ted Quinn; Jerry Mauck; Richard Bockhorst

    2014-09-01

    There are significant developments underway in new types of actuators for power plant active components. Many of these make use of digital technology to provide a wide array of benefits in performance of the actuators and in reduced burden to maintain them. These new product offerings have gained considerable acceptance in use in process plants. In addition, they have been used in conventional power generation very successfully. This technology has been proven to deliver the benefits promised and substantiate the claims of improved performance. The nuclear industry has been reluctant to incorporate digital actuator technology into nuclear plant designs due to concerns due to a number of concerns. These could be summarized as cost, regulatory uncertainty, and a certain comfort factor with legacy analog technology. The replacement opportunity for these types of components represents a decision point for whether to invest in more modern technology that would provide superior operational and maintenance benefits. Yet, the application of digital technology has been problematic for the nuclear industry, due to qualification and regulatory issues. With some notable exceptions, the result has been a continuing reluctance to undertake the risks and uncertainties of implementing digital actuator technology when replacement opportunities present themselves. Rather, utilities would typically prefer to accept the performance limitations of the legacy analog actuator technologies to avoid impacts to project costs and schedules. The purpose of this report is to demonstrate that the benefits of digital actuator technology can be significant in terms of plant performance and that it is worthwhile to address the barriers currently holding back the widespread development and use of this technology. It addresses two important objectives in pursuit of the beneficial use of digital actuator technology for nuclear power plants: 1. To demonstrate the benefits of digital actuator

  12. Technology Catalogue. First edition

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Department of Energy`s Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM`s Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department`s clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD`s applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina).

  13. Technology Applications Team: Applications of aerospace technology

    Science.gov (United States)

    1993-01-01

    Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

  14. Emerging wind energy technologies

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Grivel, Jean-Claude; Faber, Michael Havbro

    2014-01-01

    This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive.......This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive....

  15. School Security Technologies

    Science.gov (United States)

    Schneider, Tod

    2010-01-01

    Over the past decade electronic security technology has evolved from an exotic possibility into an essential safety consideration. Before resorting to high-tech security solutions, school officials should think carefully about the potential for unintended consequences. Technological fixes may be mismatched to the problems being addressed. They can…

  16. Information technology ethics

    DEFF Research Database (Denmark)

    Hongladarom, Soraj; Ess, Charles

    This book was the first publication to take a genuinely global approach to the diverse ethical issues evoked by Information and Communication Technologies and their possible resolutions. Readers will gain a greater appreciation for the problems and possibilities of genuinely global information...... ethics, which are urgently needed as information and communication technologies continue their exponential growth...

  17. Electron tunnel sensor technology

    Science.gov (United States)

    Waltman, S. B.; Kaiser, W. J.

    1989-01-01

    The recent development of Scanning Tunneling Microscopy technology allows the application of electron tunneling to position detectors for the first time. The vacuum tunnel junction is one of the most sensitive position detection mechanisms available. It is also compact, simple, and requires little power. A prototype accelerometer based on electron tunneling, and other sensor applications of this promising new technology are described.

  18. Technological advances transforming rheumatology

    Science.gov (United States)

    Robinson, William H.; Mao, Rong

    2016-01-01

    Technological advances over the past decade have revolutionized many areas of rheumatology, ranging from diagnosis, prognosis and therapeutic development to the mechanistic understanding of rheumatic diseases. This overview highlights key technological innovations and discusses the major impact that these developments are having on research and clinical practice. PMID:26439404

  19. Technology and Teaching Philosophy

    Science.gov (United States)

    King, Paul C.

    2012-01-01

    This article discusses the challenges faced when integrating new technologies into the classroom. Viewing the experiences of teaching a first year learning community through the lens of the principles of the Reflective Teaching Portfolio, the author looks to answer the question: "How should Technology relate to our Teaching Philosophy?" While a…

  20. Technology and Teaching Philosophy

    Science.gov (United States)

    King, Paul C.

    2012-01-01

    This article discusses the challenges faced when integrating new technologies into the classroom. Viewing the experiences of teaching a first year learning community through the lens of the principles of the Reflective Teaching Portfolio, the author looks to answer the question: "How should Technology relate to our Teaching Philosophy?"…

  1. Danish SDHW Technology

    DEFF Research Database (Denmark)

    Furbo, Simon

    1996-01-01

    The status of Danish technology for solar heating systems for hot water supply as well as R&D work in the field is presented.......The status of Danish technology for solar heating systems for hot water supply as well as R&D work in the field is presented....

  2. Shopping for Technology.

    Science.gov (United States)

    Middleton, James A.; Flores, Alfinio; Knaupp, Jonathan

    1997-01-01

    To avoid underuse, inaccessibility, and obsolescence when choosing, purchasing, and using technology, educators should maximize the number of students sharing machines, build technology into the curriculum, ensure continuous accessibility, network computers, and build physical plant considerations into their purchase plans. A single high-end…

  3. Introducing New Technology

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The 5th China Fujian Technology and Project Fair (CFTPF) will be held from June 18 to 20 this year. Established in 2003, the CFTPF is one of the most impor - tant fairs for promoting advanced science and technological products for the benefit of Chinese

  4. Technology and sustainability

    NARCIS (Netherlands)

    Kroeze, C.; Boersema, J.J.; Tellegen, E.; Cremers, A.

    2011-01-01

    In ten essays, this book addresses a broad range of issues related to the interplay of sustainability and technology. How do population growth and technology relate to sustainable development? Can globalization be reconciled with sustainable development? Is sustainability a subjective or an

  5. Arts and Technology

    DEFF Research Database (Denmark)

    This book constitutes the thoroughly refereed post-conference proceedings of the Second International Conference on Arts and Technology, ArtsIT 2011, which was held in December 2011 in Esbjerg, Denmark. The 19 revised full papers and the two poster papers cover various topics such as Interaction...... and Art, Music and Performance, and Digital Technology....

  6. Information Technology Initiative (Videorecording),

    Science.gov (United States)

    Physical description: 1 VHS video; col.; sd.; mono.; standard playback sp.; 35:40 mins.; 1/2 in. In this video, Dr. Kurt Fisher, Deputy Director for Information Technology , introduces the Corporate Information Management (CIM) program and explains the following major technical initiatives: reuse/repositories; I-case; data administration; information technology architecture; software process improvement; standards.

  7. Advanced Cell Technology, Inc.

    Science.gov (United States)

    Caldwell, William M

    2007-03-01

    Advanced Cell Technology, Inc. (OTCBB: ACTC) is a biotechnology company applying novel human embryonic stem cell technologies in the emerging field of regenerative medicine. We believe that regenerative medicine has the potential to revolutionize the field by enabling scientists to produce human cells of any kind for use in a wide array of therapies.

  8. Advanced Mirror Technology Development

    Science.gov (United States)

    Stahl, H. Philip

    2017-01-01

    The Advanced Mirror Technology Development (AMTD) project matures critical technologies required to enable ultra-stable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics and ultra-high-contrast observations of exoplanets.

  9. Teaching with Technology

    Science.gov (United States)

    Martineau, Pamela

    2009-01-01

    In an era when technology seems to be changing almost daily, school boards, administrators, and teachers need to revisit their technology policies almost as rapidly, education experts advise. Internet chat rooms, online video games, and other electronic features that once seemed inappropriate for the classroom are proving useful for meeting many…

  10. Assistive Technologies for Reading

    Science.gov (United States)

    Ruffin, Tiece M.

    2012-01-01

    Twenty-first century teachers working with diverse readers are often faced with the question of how to integrate technology in reading instruction that meets the needs of the techno-generation. Are today's teachers equipped with the knowledge of how to effectively use Assistive Technologies (AT) for reading? This position paper discusses AT for…

  11. CSIR Technology Impact 1998

    CSIR Research Space (South Africa)

    CSIR

    1998-01-01

    Full Text Available stream_source_info CSIR Technology Impact 1998.pdf.txt stream_content_type text/plain stream_size 23 Content-Encoding ISO-8859-1 stream_name CSIR Technology Impact 1998.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  12. Technology transfer and learning

    NARCIS (Netherlands)

    Steenhuis, Harm-Jan; Bruijn, de Erik J.

    2002-01-01

    Despite the fact that international technology transfer has been widely studied its management still encounters many difficulties. To fully understand the issues that are relevant to the process of transferring production technology, it is necessary to determine the important factors that influence

  13. Computers: Educational Technology Paradox?

    Science.gov (United States)

    Hashim, Hajah Rugayah Hj.; Mustapha, Wan Narita

    2005-01-01

    As we move further into the new millennium, the need to involve and adapt learners with new technology have been the main aim of many institutions of higher learning in Malaysia. The involvement of the government in huge technology-based projects like the Multimedia Super Corridor Highway (MSC) and one of its flagships, the Smart Schools have…

  14. Use of Payment Technology

    DEFF Research Database (Denmark)

    Xiao, Xiao; Hedman, Jonas; Runnemark, Emma

    2015-01-01

    Drawing on the theory of consumption value, this research-in-progress strives to provide a theoretical explanation of payment technology use by investigating the relationship between consumers’ perceptions of different consumption values associated with a certain payment technology and their choi...... behavior, as well as the debate on moving towards a cashless society....

  15. Riding the Technology Wave.

    Science.gov (United States)

    Malan, Pierre

    This paper presents an overview of information technology development. The first section sets the scene, comparing the first WAN (Wide Area Network) and Intel processor to current technology. The birth of the microcomputer is described in the second section, including historical background on semiconductors, microprocessors, and the microcomputer.…

  16. Wind technology issues

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Antoni; Prats, Pep [Ecotecnia S.C.C.L., Barcelona (Spain)

    1999-01-01

    The paper focuses on the main trends of the technology behind the present wind energy applications. The technology characteristics and main challenges are analysed. The important links between political decisions and the development to date of wind turbines signal a direction for forecasting future tendencies and the possible technical characteristics of future turbines. (Author)

  17. Arts and Technology

    DEFF Research Database (Denmark)

    This book constitutes the thoroughly refereed post-conference proceedings of the Second International Conference on Arts and Technology, ArtsIT 2011, which was held in December 2011 in Esbjerg, Denmark. The 19 revised full papers and the two poster papers cover various topics such as Interaction...... and Art, Music and Performance, and Digital Technology....

  18. Use of Payment Technology

    DEFF Research Database (Denmark)

    Xiao, Xiao; Hedman, Jonas; Runnemark, Emma

    2015-01-01

    Drawing on the theory of consumption value, this research-in-progress strives to provide a theoretical explanation of payment technology use by investigating the relationship between consumers’ perceptions of different consumption values associated with a certain payment technology and their choi...

  19. Nuclear safeguards technology handbook

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    The purpose of this handbook is to present to United States industrial organizations the Department of Energy's (DOE) Safeguards Technology Program. The roles and missions for safeguards in the U.S. government and application of the DOE technology program to industry safeguards planning are discussed. A guide to sources and products is included. (LK)

  20. Technology and sustainability

    NARCIS (Netherlands)

    Kroeze, C.; Boersema, J.J.; Tellegen, E.; Cremers, A.

    2011-01-01

    In ten essays, this book addresses a broad range of issues related to the interplay of sustainability and technology. How do population growth and technology relate to sustainable development? Can globalization be reconciled with sustainable development? Is sustainability a subjective or an objectiv

  1. Presidents and Technology

    Science.gov (United States)

    Ekman, Richard

    2005-01-01

    Almost everyone on campus today grasps the benefits of easy availability of information technology, but for college presidents, the expectations for information technology have been high from the early days. The grail in futurist dreams has been a machine that "thinks," using a very big base of information to sift evidence, make judgments, and…

  2. Institutionalized Technological Foresight

    DEFF Research Database (Denmark)

    Koch, Christian; Hansen, Hans Henrik; Stissing Jensen, Jens

    2008-01-01

    in the national strategy of coordinating and strengthening policy on research, technology and innovation in one superministry. The paper evaluates the methods, impact and role in policy making of these technological foresights. The particular role of institutionalized public foresight in relation to enterprise...

  3. Technology and Educational Structure

    Science.gov (United States)

    Boocock, Sarane S.

    2012-01-01

    Most current debate on instructional technology is characterized either by grandiose speculation on the salvation of education through automation (without specification of "what" and "how" technological innovations will actually be introduced in specific classroom situations, and how the changes will be financed), or by jargon-filled hairsplitting…

  4. Bridging the Technological Gap.

    Science.gov (United States)

    Lazow, Robert; And Others

    The aim of "Bridging the Technological Gap" (BTG), a federally funded demonstration project, is to use microcomputer technology in the rehabilitation of the psychiatrically disabled. Through the use of a custom designed microcomputer software package, clients receive remediation in areas of specific cognitive and behavioral deficits. The project…

  5. Science and Technology Policy

    DEFF Research Database (Denmark)

    Baark, Erik

    1996-01-01

    This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years.......This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years....

  6. Educational Technology Funding Models

    Science.gov (United States)

    Mark, Amy E.

    2008-01-01

    Library and cross-disciplinary literature all stress the increasing importance of instructional technology in higher education. However, there is a dearth of articles detailing funding for library instructional technology. The bulk of library literature on funding for these projects focuses on one-time grant opportunities and on the architecture…

  7. Advanced Materials Technology

    Science.gov (United States)

    Blankenship, C. P. (Compiler); Teichman, L. A. (Compiler)

    1982-01-01

    Composites, polymer science, metallic materials (aluminum, titanium, and superalloys), materials processing technology, materials durability in the aerospace environment, ceramics, fatigue and fracture mechanics, tribology, and nondestructive evaluation (NDE) are discussed. Research and development activities are introduced to the nonaerospace industry. In order to provide a convenient means to help transfer aerospace technology to the commercial mainstream in a systematic manner.

  8. Graphite technology development plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-07-01

    This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

  9. Mechatronics and hybrid technologies

    DEFF Research Database (Denmark)

    2008-01-01

    R&D international contributions to control and design of novel intelligent mechatronic products and solutions with sensor- and actuator technology.......R&D international contributions to control and design of novel intelligent mechatronic products and solutions with sensor- and actuator technology....

  10. Interpretation of Internet technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    2001-01-01

    -cognitive competencies of organisations (Rindova & Fombrunn, 1999). The aim is to contribute to the existing technological implementation theory complex by studying the relationships between the elements of the socio-cognitive processes and the resulting interpretations and actions when new technologies are implemented......Research scope: The topic of the research project is to investigate how new internet technologies such as e-trade and customer relation marketing and management are implemented in Danish food processing companies. The aim is to use Weick's (1995) sensemaking concept to analyse the strategic...... processes leading to the use of internet marketing technologies and to investigate how these new technologies are interpreted into the organisation. Investigating the organisational socio-cognitive processes underlying the decision making processes will give further insight into the socio...

  11. MODERN BIOGAS TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Yu. I. Sidorov

    2013-02-01

    Full Text Available The modern technical level of biogas technologies is considered, in particular in Ukraine. It is shown that in Ukraine the level of introduction of these technologies remains unsatisfactory. The main reason of such state is absence of the government program of development of sufficiently not profitable biogas industry, which again depends on availability of investment facilities including the state one. On the example of the company’s data Zorg Biogas AG, which is dominant in Ukraine among the foreign ones that offer their products using the technique of the net present value — NPV — it is shown insolvency of functioning of profitable biogas power plants. A conclusion is done about the necessity of orientation on own development in area of biogas technologies, State support and intensive technologies. The world level of modern intensive biogas technologies, in particular the use of the cogeneration plants.

  12. Technology in L1

    DEFF Research Database (Denmark)

    Elf, Nikolaj Frydensbjerg; Hanghøj, Thorkild; Skaar, Håvard

    2015-01-01

    In recent decades, several Scandinavian research projects have had an explicit focus on how technology intervenes in L1 (or so-called Mother Tongue Education) practices in Swedish, Norwegian and Danish educational contexts, and how this may impact on understanding of the subject. There is currently......-of-school literacy practices. A final find-ing is the emphasis on teacher uncertainty regarding how and why to integrate technology within exist-ing paradigms of the subject. This calls for further research on how technology may be justified in L1 practice, including various forms of teacher education....... no systematic overview of the documented possibilities and challenges related to the use of technology in L1. At the same time, there is terminological confusion in use of ‘technology’ and related concepts in L1. Finally, there is a general lack of critical reflection on the relation between technological...

  13. Globalization and Technology

    Directory of Open Access Journals (Sweden)

    Traian-Alexandru Miu

    2016-01-01

    Full Text Available Globalization, very complex phenomenon, involves overcoming the barriers between different states, which allowed the rapid transfer of capital, technology, information, and the "toxins" from one country to another. First, the technology formed the basis of rapid expansion of great ideas promoted by globalization. Undeniable progress in the field of technology and science, has conferred to the man extraordinary powers that have been used most often to the detriment of his spiritual progress. We must not deny that science and technology have brought many benefits to human, and he could expand the knowledge horizon upon the world in which he lives, exploiting information acquired and share them with others. Science and technology must become for postmodern man ways of talk and communion between human and divinity, all to the praise of God and the perfection of the creature.

  14. Art, Technology and Nature

    DEFF Research Database (Denmark)

    Since 1900, the connections between art and technology with nature have become increasingly inextricable. Through a selection of innovative readings by international scholars, this book presents the first investigation of the intersections between art, technology and nature in post-medieval times....... Transdisciplinary in approach, this volume’s 14 essays explore art, technology and nature’s shifting constellations that are discernible at the micro level and as part of a larger chronological pattern. Included are subjects ranging from Renaissance wooden dolls, science in the Italian art academies, and artisanal...... Camilla Skovbjerg Paldam and Jacob Wamberg trace the Kantian heritage of radically separating art and technology, and inserting both at a distance to nature, suggesting this was a transient chapter in history. Thus, they argue, the present renegotiation between art, technology and nature is reminiscent...

  15. Designing Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    and the design process, in ethical and society-related concerns, and in evaluating how designs fulfill needs and solve problems. Designing Human Technologies subscribes to a broad technology concept including information and communication, mobile, environmental/sustainable and energy technologies......, the Humanities, and Social Science. The initiative broadens the perspective of IS and recognize reflections on aesthetics, ethics, values, connections to politics, and strategies for enabling a better future as legitimate parts of the research agenda. Designing Human Technologies is a design-oriented Strategic...... and technologies relating to performances and experiences, urban design, climate adaptation, etc. The research takes a process-oriented and participatory approach and involves interaction between different user interests and designs. It is based on empirical, typical case- and action research-oriented studies...

  16. Introduction to microarray technology.

    Science.gov (United States)

    Dufva, Martin

    2009-01-01

    DNA microarrays can be used for large number of application where high-throughput is needed. The ability to probe a sample for hundred to million different molecules at once has made DNA microarray one of the fastest growing techniques since its introduction about 15 years ago. Microarray technology can be used for large scale genotyping, gene expression profiling, comparative genomic hybridization and resequencing among other applications. Microarray technology is a complex mixture of numerous technology and research fields such as mechanics, microfabrication, chemistry, DNA behaviour, microfluidics, enzymology, optics and bioinformatics. This chapter will give an introduction to each five basic steps in microarray technology that includes fabrication, target preparation, hybridization, detection and data analysis. Basic concepts and nomenclature used in the field of microarray technology and their relationships will also be explained.

  17. NASA priority technologies

    Science.gov (United States)

    Sadin, S. R.; Slone, H. O.

    1983-01-01

    Significant research areas deserving of attention within the NASA Space Research and Technology program are discussed, noting that the program is pursed to strengthen the U.S. technology base, improve low-cost access to space, and to aid in the expanded use of space, including a space station. Study areas being pursued include new Orbiter thermal protection system materials, developing longer-life reusable engines, and providing the technology for orbital transfer vehicle propulsion and aeroassisted braking. Attention is also being given to CFD techniques for entry body and rocket engine design, verifying the feasibility of advanced sensor concepts, defining the technology for large deployable RF antennas, and improving on-board data management systems. Of particular concern is to establish technologies which will enhance and extend a permanent manned presence in space.

  18. Making technology public

    DEFF Research Database (Denmark)

    Winthereik, Brit Ross; Johannsen, Nis; Strand, Dixi Louise

    2008-01-01

    secure the future of the technology and organisation behind it. Research limitations/implications – The paper extends the script metaphor beyond a limited designer-technology-user configuration and argues that scripts in the paraphernalia of technologies also can and should be “de......Purpose – Through an analysis of a demonstration video presenting a new national e-health portal, this paper aims to explore the assumptions and limitations of the concept of “script” and suggests a different approach to analysing the moral order of technology design. Design...... the transformative potential of the portal presentation for reconfiguring relationships between citizens, health care systems, and information and communication technology (ICT). The analysis is guided by Haraway's notion of diffraction. Findings – The analysis demonstrates the particular way in which the user...

  19. Working around technologies

    DEFF Research Database (Denmark)

    Dupret, Katia

    2017-01-01

    in Denmark. The aim and contribution of the study is twofold. First, it attempts to revitalise the discussion on technology workaround strategies as responsible professionalism. Second, it will direct attention to and contribute to an understanding of how the normativity embedded in technological development......This study discusses how professionalism and work ethics influence how health care professionals work around new technologies. When people avoid using technologies, they are not necessarily ceasing to engage in their work activities. The workaround strategies presented here are rather practical...... expressions of professionals’ active encounter with the complexity of work situations, and can therefore be important signs of professional ethical judgement. Drawing on science and technology studies and the concept of invisible work, the study discusses workaround situations that arise in health care work...

  20. Communication technology update and fundamentals

    CERN Document Server

    Grant, August E

    2010-01-01

    New communication technologies are being introduced at an astonishing rate. Making sense of these technologies is increasingly difficult. Communication Technology Update and Fundamentals is the single best source for the latest developments, trends, and issues in communication technology. Featuring the fundamental framework along with the history and background of communication technologies, Communication Technology Update and Fundamentals, 12th edition helps you stay ahead of these ever-changing and emerging technologies.As always, every chapter ha

  1. The technology vicinity: a location based view on technology

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that

  2. Robotics Technology Development Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Robotics Technology Development Program (RTDP) is a ``needs-driven`` effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination & Dismantlement (D&D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D&D and CC&AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  3. Flexibility of MIP Technology

    Institute of Scientific and Technical Information of China (English)

    Tang Jinlian; Gong Jianhong; Xu Youhao

    2015-01-01

    The lfexibility of MIP technology to meet market demand is mainly introduced in this study. Their commercial application and technical principle are analyzed too. The MIP technology with wide feed adaptability can form a good com-bination with other technologies. The MIP technology has been applied extensively in China. Based on this platform, the CGP, MIP-LTG and MIP-DCR technologies have been developed, which can further improve the lfexibility of MIP tech-nology. Based on its novel reaction control technique with a sole sequential two-zone riser, the MIP users can easily switch to different operating modes between producing either more clean gasoline and propylene or diesel through changing the catalysts and varying the operating conditions. That offers MIP users with enough production lfexibility and a rational pro-duction arrangement to meet the market demand. The MIP-DCR technology with less dry gas and coke yields can provide a more lfexible operating mode since the catalysts to oil ratio has become an independent variable.

  4. Technology and medicine.

    Science.gov (United States)

    Booth, C

    1985-05-22

    Technology, which is older than science, has been of vital importance in the development of modern medicine. Even so, there are voices of dissent to be heard. The disenchantment with technology expressed by Aldous Huxley in Brave new world has been echoed by contemporary writers on the technology of modern medicine. Medicine is seen by some to have been dehumanized by technology, and techniques that are expensive are thought to be consuming a greater proportion of health resources than they deserve. The practice of medicine has, nevertheless, been transformed by modern technology and diagnostic techniques and therapeutic measures undreamed of a few short decades ago are now commonplace. There is no reason why these developments should be any more dehumanizing than the use of similar techniques in modern transportation or communication, nor is their expense out of proportion when compared with other demands on the nation's purse. British workers have been at the forefront of many recent advances. Yet, even though the National Health Service provides a ready market for the products of British medical technology, the nation depends to an inordinate degree on imported products. In the development of appropriate medical technology there is an urgent need for better communication between inventors, scientists, industrialists and the National Health Service. At the same time there is an equal need for improved evaluation of untried techniques. The pressure for a central integrating body to coordinate resources could well be supported by the establishment of evaluation units in the different health authorities in this country.

  5. Emergent technologies: 25 years

    Science.gov (United States)

    Rising, Hawley K.

    2013-03-01

    This paper will talk about the technologies that have been emerging over the 25 years since the Human Vision and Electronic Imaging conference began that the conference has been a part of, and that have been a part of the conference, and will look at those technologies that are emerging today, such as social networks, haptic technologies, and still emerging imaging technologies, and what we might look at for the future.Twenty-five years is a long time, and it is not without difficulty that we remember what was emerging in the late 1980s. Yet to be developed: The first commercial digital still camera was not yet on the market, although there were hand held electronic cameras. Personal computers were not displaying standardized images, and image quality was not something that could be talked about in a standardized fashion, if only because image compression algorithms were not standardized yet for several years hence. Even further away were any standards for movie compression standards, there was no personal computer even on the horizon which could display them. What became an emergent technology and filled many sessions later, image comparison and search, was not possible, nor the current emerging technology of social networks- the world wide web was still several years away. Printer technology was still devising dithers and image size manipulations which would consume many years, as would scanning technology, and image quality for both was a major issue for dithers and Fourier noise.From these humble beginnings to the current moves that are changing computing and the meaning of both electronic devices and human interaction with them, we will see a course through the changing technology that holds some features constant for many years, while others come and go.

  6. Communication and collaboration technologies.

    Science.gov (United States)

    Cheeseman, Susan E

    2012-01-01

    This is the third in a series of columns exploring health information technology (HIT) in the neonatal intensive care unit (NICU). The first column provided background information on the implementation of information technology throughout the health care delivery system, as well as the requisite informatics competencies needed for nurses to fully engage in the digital era of health care. The second column focused on information and resources to master basic computer competencies described by the TIGER initiative (Technology Informatics Guiding Education Reform) as learning about computers, computer networks, and the transfer of data.1 This column will provide additional information related to basic computer competencies, focusing on communication and collaboration technologies. Computers and the Internet have transformed the way we communicate and collaborate. Electronic communication is the ability to exchange information through the use of computer equipment and software.2 Broadly defined, any technology that facilitates linking one or more individuals together is a collaborative tool. Collaboration using technology encompasses an extensive range of applications that enable groups of individuals to work together including e-mail, instant messaging (IM ), and several web applications collectively referred to as Web 2.0 technologies. The term Web 2.0 refers to web applications where users interact and collaborate with each other in a collective exchange of ideas generating content in a virtual community. Examples of Web 2.0 technologies include social networking sites, blogs, wikis, video sharing sites, and mashups. Many organizations are developing collaborative strategies and tools for employees to connect and interact using web-based social media technologies.3.

  7. Advances in Gyroscope Technologies

    CERN Document Server

    Armenise, Mario N; Dell'Olio, Francesco; Passaro, Vittorio MN

    2011-01-01

    This monograph collects and critically reviews the main results obtained by the scientific community in gyroscope technologies research field. It describes architectures, design techniques and fabrication technology of angular rate sensors proposed in literature. MEMS, MOEMS, optical and mechanical technologies are discussed together with achievable performance. The book also considers future research trends aimed to cover special applications. The book is intended for researchers and Ph.D. students interested in modelling, design and fabrication of gyros. The book may be a useful education su

  8. Interpretation of Internet technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    2001-01-01

    Research scope: The topic of the research project is to investigate how new internet technologies such as e-trade and customer relation marketing and management are implemented in Danish food processing companies. The aim is to use Weick's (1995) sensemaking concept to analyse the strategic....... Additionally, the project will investigate the technological strategies in organisations in order to gain a deeper understanding of the cognitive barriers towards implementing new technology in organisations. The research will therefore concentrate on the development process in the organisation's perception...

  9. Benchmarking semantic web technology

    CERN Document Server

    García-Castro, R

    2009-01-01

    This book addresses the problem of benchmarking Semantic Web Technologies; first, from a methodological point of view, proposing a general methodology to follow in benchmarking activities over Semantic Web Technologies and, second, from a practical point of view, presenting two international benchmarking activities that involved benchmarking the interoperability of Semantic Web technologies using RDF(S) as the interchange language in one activity and OWL in the other.The book presents in detail how the different resources needed for these interoperability benchmarking activities were defined:

  10. Biometrics Bodies, Technologies, Biopolitics

    CERN Document Server

    Pugliese, Joseph

    2012-01-01

    Biometric technologies, such as finger- or facial-scan, are being deployed across a variety of social contexts in order to facilitate and guarantee identity verification and authentication. In the post-9/11 world, biometric technologies have experienced an extraordinary period of growth as concerns about security and screening have increased. This book analyses biometric systems in terms of the application of biopolitical power - corporate, military and governmental - on the human body. It deploys cultural theory in examining the manner in which biometric technologies constitute the body as a

  11. Power generation technologies

    CERN Document Server

    Breeze, Paul

    2014-01-01

    The new edition of Power Generation Technologies is a concise and readable guide that provides an introduction to the full spectrum of currently available power generation options, from traditional fossil fuels and the better established alternatives such as wind and solar power, to emerging renewables such as biomass and geothermal energy. Technology solutions such as combined heat and power and distributed generation are also explored. However, this book is more than just an account of the technologies - for each method the author explores the economic and environmental costs and risk factor

  12. Educational technology, reimagined.

    Science.gov (United States)

    Eisenberg, Michael

    2010-01-01

    "Educational technology" is often equated in the popular imagination with "computers in the schools." But technology is much more than merely computers, and education is much more than mere schooling. The landscape of child-accessible technologies is blossoming in all sorts of directions: tools for communication, for physical construction and fabrication, and for human-computer interaction. These new systems and artifacts allow educational designers to think much more creatively about when and where learning takes place in children's lives, both within and outside the classroom.

  13. Communications technology handbook

    CERN Document Server

    Lewis, Geoff

    2013-01-01

    This is the first point of reference for the communications industries. It offers an introduction to a wide range of topics and concepts encountered in the field of communications technology. Whether you are looking for a simple explanation, or need to go into a subject in more depth, the Communications Technology Handbook provides all the information you need in one single volume.This second edition has been updated to include the latest technology including: Video on DemandWire-less Distribution systemsHigh spee

  14. Bridge technology report

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. As LANs have proliferated, new technologies and system concepts have come to the fore. One of the key issues is how to interconnect networks. One means of interconnection is to use a 'bridge'. Other competing technologies are repeaters, routers, and gateways. Bridges permit traffic isolation, connect network segments together and operate at the MAC layer. Further, because they operate at the MAC layer, they can handle a variety of protocols such as TCP/IP, SNA, and X.25. This report focuses on the specific technology of bridging two netw

  15. Strategic Health Technology Incorporation

    CERN Document Server

    Wang, Binseng

    2009-01-01

    Technology is essential to the delivery of health care but it is still only a tool that needs to be deployed wisely to ensure beneficial outcomes at reasonable costs. Among various categories of health technology, medical equipment has the unique distinction of requiring both high initial investments and costly maintenance during its entire useful life. This characteristic does not, however, imply that medical equipment is more costly than other categories, provided that it is managed properly. The foundation of a sound technology management process is the planning and acquisition of equipment

  16. Calculations in furnace technology

    CERN Document Server

    Davies, Clive; Hopkins, DW; Owen, WS

    2013-01-01

    Calculations in Furnace Technology presents the theoretical and practical aspects of furnace technology. This book provides information pertinent to the development, application, and efficiency of furnace technology. Organized into eight chapters, this book begins with an overview of the exothermic reactions that occur when carbon, hydrogen, and sulfur are burned to release the energy available in the fuel. This text then evaluates the efficiencies to measure the quantity of fuel used, of flue gases leaving the plant, of air entering, and the heat lost to the surroundings. Other chapters consi

  17. OHVT technology roadmap [2000

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, R.A.

    2000-02-01

    The OHVT Technology Roadmap for 2000 presents the multiyear program plan of the U.S. DOE's Office of Heavy Vehicle Technologies (OHVT). It is an update of the 1997 plan, reflecting changes in regulations and ongoing discussions with DOE's heavy vehicle customers. The technical plan covers three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); (3) class 1-2 (pickups, vans, and sport utility vehicles) as well as enabling and supporting technologies. The Roadmap documents program goals, schedules, and milestones.

  18. Digital security technology simplified.

    Science.gov (United States)

    Scaglione, Bernard J

    2007-01-01

    Digital security technology is making great strides in replacing analog and other traditional security systems including CCTV card access, personal identification and alarm monitoring applications. Like any new technology, the author says, it is important to understand its benefits and limitations before purchasing and installing, to ensure its proper operation and effectiveness. This article is a primer for security directors on how digital technology works. It provides an understanding of the key components which make up the foundation for digital security systems, focusing on three key aspects of the digital security world: the security network, IP cameras and IP recorders.

  19. Footprints of alien technology

    Science.gov (United States)

    Davies, P. C. W.

    2012-04-01

    If alien civilizations do, or did, exist, their technology will impact their environment. Some consideration has been given to the detection of large-scale astro-engineering, such as Dyson spheres. However, a very advanced technology might leave more subtle footprints requiring sophisticated scientific methods to uncover. We must not overlook the possibility that alien technology has impacted our immediate astronomical environment, even Earth itself, but probably a very long time ago. This raises the question of what traces, if anything, might remain today. I shall consider the possibilities of biological, geological and physical traces, and suggest ways that we might search for them.

  20. Humanitarian demining technology toolbox

    Science.gov (United States)

    Joynt, Vernon P.

    2003-09-01

    This is a keynote address surveying the field of Humanitarian Demining (HD) from the viewpoint of a participating company. The controlling bodies, funding structures and some of the important sources of R&D relevant to HD are identified. The various techniques and technologies in common use as also technologies freshly put into field use are mentioned. The way in which they all fit into the demining toolbox is explained. Finally a view of future technologies that are potentially able to change HD efficiency and safety is discussed.

  1. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

  2. ACCELERATING NANO-TECHNOLOGICAL

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing; Koch, Christian

    2007-01-01

    By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which concludes...... of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support “incubation rooms” or marked niches in order...

  3. Mobile Router Technology Development

    Science.gov (United States)

    Ivancic, William D.; Stewart, David H.; Bell, Terry L.; Kachmar, Brian A.; Shell, Dan; Leung, Kent

    2002-01-01

    Cisco Systems and NASA have been performing joint research on mobile routing technology under a NASA Space Act Agreement. Cisco developed mobile router technology and provided that technology to NASA for applications to aeronautic and space-based missions. NASA has performed stringent performance testing of the mobile router, including the interaction of routing and transport-level protocols. This paper describes mobile routing, the mobile router, and some key configuration parameters. In addition, the paper describes the mobile routing test network and test results documenting the performance of transport protocols in dynamic routing environments.

  4. Technology Transfer/Commercialization Report

    Science.gov (United States)

    2002-01-01

    Contents include the following: (1) Who we are. (2) Technology opportunities and successes in 2002: Hilbert-Huang transform; new sensors via sol-gel-filled fiber optics; hierarchical segmentation software. (3) Activities in 2002: encouraging researcher involvement; inventorying new technologies; patenting Goddard technologies; promoting Goddard technologies; establishing new agreements;seeking and bestowing awards. (4) How to reach Goddard's: technology commercialization office.

  5. Gauging Technology Costs and Benefits

    Science.gov (United States)

    Kaestner, Rich

    2007-01-01

    Regardless of the role technology plays in a school district, district personnel should know the costs associated with technology, understand the consequences of technology purchases, and be able to measure the benefits of technology, so they can make more informed decisions. However, determining costs and benefits of current technology or…

  6. Technology Transfer/Commercialization Report

    Science.gov (United States)

    2002-01-01

    Contents include the following: (1) Who we are. (2) Technology opportunities and successes in 2002: Hilbert-Huang transform; new sensors via sol-gel-filled fiber optics; hierarchical segmentation software. (3) Activities in 2002: encouraging researcher involvement; inventorying new technologies; patenting Goddard technologies; promoting Goddard technologies; establishing new agreements;seeking and bestowing awards. (4) How to reach Goddard's: technology commercialization office.

  7. GENERAL ENVIRONMENTAL CORPORATION; CURE ELECTROCOAGULATION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The CURE electrocoagulation technology was demonstrated under the Superfund Innovative Technology Evaluation (SITE) program at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS), where water from the solar evaporation ponds (SEPs) was contaminat...

  8. Technology development and technology gap among Latin American countries

    OpenAIRE

    Serrano Moya, Edgar David

    2014-01-01

    Objective: to study the source of the technology gaps amongst some Latin American countries and to identify whether a regional system of technological progress may be strengthened. ethodology: technology development within some Latin America countries was researched based on the technology frontier concept. In order to do that, the technological advancement of such countries was compared using standard variables and institutional systems. The concept and scope of the technology frontier, whic...

  9. Technology-Use Mediation

    DEFF Research Database (Denmark)

    Bansler, Jørgen P.; Havn, Erling C.

    2004-01-01

    Implementation of new computer-mediated communication (CMC) systems in organizations is a complex socio-technical endeavour, involving the mutual adaptation of technology and organization over time. Drawing on the analytic concept of sensemaking, this paper provides a theoretical perspective...... that deepens our understanding of how organizations appropriate new electronic communication media. The paper analyzes how a group of mediators in a large, multinational company adapted a new web-based CMC technology (a virtual workspace) to the local organizational context (and vice versa) by modifying...... features of the technology, providing ongoing support for users, and promoting appropriate conventions of use. We found that these mediators exerted considerable influence on how the technology was established and used in the organization. The mediators were not neutral facilitators of a well...

  10. Ocean Technology Development Tank

    Data.gov (United States)

    Federal Laboratory Consortium — The new SWFSC laboratory in La Jolla incorporates a large sea- and fresh-water Ocean Technology Development Tank. This world-class facility expands NOAA's ability to...

  11. Technologies, Transformations, and Responses

    Directory of Open Access Journals (Sweden)

    Sha Li Zhang

    2000-04-01

    Full Text Available

    頁次:18-23

    Technological innovations have played significant roles in improving human conditions in the history of civilization. The quality of life is expected to improve further as a result of the evolving technologies. Libraries have benefited by the many advantages offered through technology. Positive responses to new technological breakthroughs will enable libraries to provide improved and value-added services in our rapidly changing environment.

  12. Modern technologies in Endodontics

    Directory of Open Access Journals (Sweden)

    Alfredo Iandolo

    2016-06-01

    Conclusions: The positive results highlighted by these clinical cases demonstrate how the use of modern technologies are essential to avoid iatrogenic injury, and guarantee, on the other hand, safe and reproducible results.

  13. Modern technologies in Endodontics

    National Research Council Canada - National Science Library

    Iandolo, Alfredo; Iandolo, Giuseppe; Malvano, Mariano; Pantaleo, Giuseppe; Simeone, Michele

    2016-01-01

    .... Materials and methods: Today, thanks to modern technologies as Operative Microscope, ultrasonic tips, M-Wire Files, devices to activate irrigation and tridimensional obturation performed with thermo plasticized gutta...

  14. Applied machining technology

    CERN Document Server

    Tschätsch, Heinz

    2010-01-01

    Machining and cutting technologies are still crucial for many manufacturing processes. This reference presents all important machining processes in a comprehensive and coherent way. It includes many examples of concrete calculations, problems and solutions.

  15. Insider protection technology developments

    Energy Technology Data Exchange (ETDEWEB)

    Foesch, J.; Bortniak, P.; Waddoups, I.

    1994-08-01

    Sandia National Laboratories evaluates and develops new techniques and technologies to ensure the integrity of special nuclear material (SNM) against potential insider threats. We have evaluated several types of sensor technologies and subsystems to monitor and/or track materials and personnel. This past year`s effort has been directed at characterizing commercial developments that meet the Department of Energy`s (DOE) needs in some of these areas. Some of these evaluations are complete and some are still in progress. This paper discusses our work with infrared light (IR), radio frequency (RF), and RF proximity technologies. After these technologies are judged to be applicable to DOE`s needs, we incorporate them into the generic, real time, personnel tracking and material monitoring system.

  16. Power conversion technologies

    Energy Technology Data Exchange (ETDEWEB)

    Newton, M. A.

    1997-02-01

    The Power Conversion Technologies thrust area identifies and sponsors development activities that enhance the capabilities of engineering at Lawrence Livermore National Laboratory (LLNL) in the area of solid- state power electronics. Our primary objective is to be a resource to existing and emerging LLNL programs that require advanced solid-state power electronic technologies.. Our focus is on developing and integrating technologies that will significantly impact the capability, size, cost, and reliability of future power electronic systems. During FY-96, we concentrated our research efforts on the areas of (1) Micropower Impulse Radar (MIR); (2) novel solid-state opening switches; (3) advanced modulator technology for accelerators; (4) compact accelerators; and (5) compact pulse generators.

  17. Prosthetics and Related Technology

    Science.gov (United States)

    ... of prostheses, using leading- edge technologies such as robotics, tissue engineering, and nanotechnology to create lighter limbs ... and respiration. In a study of 32 chronic stroke patients, VA researchers found that functional neuromuscu- lar ...

  18. Armament Technology Facility (ATF)

    Data.gov (United States)

    Federal Laboratory Consortium — The Armament Technology Facility is a 52,000 square foot, secure and environmentally-safe, integrated small arms and cannon caliber design and evaluation facility....

  19. Extravehicular activity technology discipline

    Science.gov (United States)

    Webbon, Bruce W.

    1990-01-01

    Viewgraphs on extravehicular activity technology discipline for Space Station Freedom are presented. Topics covered include: extravehicular mobility unit; airlock and EMU support equipment; tools, mobility aids, and workstations; and telerobotic work aids interfaces.

  20. Fiber Optics Technology.

    Science.gov (United States)

    Burns, William E.

    1986-01-01

    Discusses various applications of fiber optics technology: information systems, industrial robots, medicine, television, transportation, and training. Types of jobs that will be available with fiber optics training (such as electricians and telephone cable installers and splicers) are examined. (CT)

  1. Utopian Approaches to Technology.

    Science.gov (United States)

    Lewis, Arthur O.

    1987-01-01

    Differentiates between utopian societies and their opposite, anti-utopias. Cites literary works which refer to the relationships between utopias and technology. Provides a bibliography of works cited as well as secondary sources. (TW)

  2. Sustainable advanced construction technologies

    CSIR Research Space (South Africa)

    Kuchena, JC

    2009-11-01

    Full Text Available Advanced Construction Technologies (ACTs) are set to become the sustainable mainstay of the construction industry due to the demand for innovative housing solutions. Like most emerging economies, South Africa from a historical perspective and global...

  3. Radiologic Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the radiologic technology program in Georgia. The standards are divided into 12 categories; Foundations (philosophy, purpose, goals, program objectives, availability, evaluation); Admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); Program…

  4. Handbook of vacuum technology

    CERN Document Server

    2016-01-01

    This comprehensive, standard work has been updated to remain an important resource for all those needing detailed knowledge of the theory and applications of vacuum technology. With many numerical examples and illustrations to visualize the theoretical issues.

  5. Manned systems technology discipline

    Science.gov (United States)

    Bretoi, Remus

    1990-01-01

    Viewgraphs on manned systems technology discipline for Space Station Freedom are presented. Topics covered include: crew-systems interfaces and interactions; crew training; on-board systems maintenance and support; habitability and environment; and computational human factors.

  6. CSIR Technology Impact 2003

    CSIR Research Space (South Africa)

    CSIR

    2003-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review (1 March 2002 - 28 February 2003) by highlighting a number of innovative projects and initiatives in various CSIR business units....

  7. Technology in cardiology

    African Journals Online (AJOL)

    Repro

    noticeable link with advanced medical technology for ... function by echocardiography allows opti- ... blood vessels smaller than 1 mm in diameter, but also the accurate placement of devices such as stents. ... of a darkened room for the light.

  8. Information and Communication Technology

    DEFF Research Database (Denmark)

    Kaila, Heidi Kristiina

    2017-01-01

    The emergence and development of the information and communication sector has been rapid in rural Viet Nam over 2006–14, and a true information and communication technology (ICT) revolution has taken place. This chapter examines household ownership and use of ICT. It studies the geographic...... and demographic differences across ownership of technology, especially phones and the Internet, and the determinants of ICT adoption. First, it finds that expansion of telephones has been much more rapid than the expansion of the Internet. Second, it finds that even though in 2014 internet users were relatively...... wealthier and more educated than households with phones on average, the adoption patterns of these two technologies are very similar. ICT adoption is driven by education and income, as well as wealth and ownership of other technology....

  9. Will Technology Humanize Us?

    Science.gov (United States)

    Snider, Robert C.

    1972-01-01

    The author considers the question of whether technology will cause humanization or dehumanization in the schools. He concludes that we can not stop tecchnology; we can only give it direction and purpose. (Author/MS)

  10. Transforming Lessons with Technology

    Science.gov (United States)

    Currie, Brad

    2016-01-01

    Using a fictitious learning environment, the author demonstrates a variety of technological tools that teachers can infuse into their classrooms. Come away with some innovative, practical methods to help students show what they know about the topic at hand.

  11. Technology Enhanced Learning

    NARCIS (Netherlands)

    Klemke, Roland; Specht, Marcus

    2013-01-01

    Klemke, R., & Specht, M. (2013, 26-27 September). Technology Enhanced Learning. Presentation at the fourth international conference on eLearning (eLearning 2013), Belgrade, Serbia. http://econference.metropolitan.ac.rs/

  12. Technologies for Legionella Control

    Science.gov (United States)

    Presentation includes a review of new Office of Water document entitled "Technologies for Legionella Control in Premise Plumbing Systems", and discussion on ORD research projects involving Legionella and disinfection.

  13. Technology catalogue. Second edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Department of Energy`s (DOE`s) Office of Environmental Management (EM) is responsible for remediating DOE contaminated sites and managing the DOE waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste-management programs within EM. The purpose of the Technology Catalogue is to: (a) provide performance data on OTD-developed technologies to scientists and engineers responsible for preparing Remedial Investigation/Feasibility Studies (RI/FSs) and other compliance documents for the DOE`s clean-up and waste-management programs; and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community.

  14. Digital Technology Entrepreneurship

    DEFF Research Database (Denmark)

    Giones, Ferran; Brem, Alexander

    2017-01-01

    Technology entrepreneurship is an established concept in academia. However, recent developments in the context of digital entrepreneurship call for revision and advance- ment. The multiple possible combinations of technology and entrepreneurship have res- ulted in a diversity of phenomena...... with significantly different characteristics and socio-economic impact. This article is focused on the identification and description of technology entrepreneurship in times of digitization. Based on current examples, we identify and describe characterizations of technology entrepreneurship, digital techno- logy...... entrepreneurship, and digital entrepreneurship. With this new delineation of terms, we would like to foster discussion between researchers, entrepreneurs, and policy makers on the impact of digitization on entrepreneurship, and set a future research agenda....

  15. Research and Technology 1980

    Science.gov (United States)

    1980-01-01

    Topics are divided into three major areas: Earth resources, advanced development, and technology transfer. Topics include: aerial color infrared photography, fiber optics, lightning research, soil mechanics, corrosion prevention, image processing, and communication systems development.

  16. CSIR Technology Impact 2002

    CSIR Research Space (South Africa)

    CSIR

    2002-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review (1 March 2001 - 28 February 2002) by highlighting a number of innovative projects and initiatives in these areas....

  17. Launching technological innovations

    DEFF Research Database (Denmark)

    Talke, Katrin; Salomo, Søren

    2009-01-01

    have received less attention. This study considers the interdependencies between strategic, internally and externally, directed tactical launch activities and investigates both direct and indirect performance effects. The analysis is based upon data from 113 technological innovations launched...

  18. Accelerator Technology Division

    Science.gov (United States)

    1992-04-01

    In fiscal year (FY) 1991, the Accelerator Technology (AT) division continued fulfilling its mission to pursue accelerator science and technology and to develop new accelerator concepts for application to research, defense, energy, industry, and other areas of national interest. This report discusses the following programs: The Ground Test Accelerator Program; APLE Free-Electron Laser Program; Accelerator Transmutation of Waste; JAERI, OMEGA Project, and Intense Neutron Source for Materials Testing; Advanced Free-Electron Laser Initiative; Superconducting Super Collider; The High-Power Microwave Program; (Phi) Factory Collaboration; Neutral Particle Beam Power System Highlights; Accelerator Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Accelerator Design and Engineering; Radio-Frequency Technology; Free-Electron Laser Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operations.

  19. Lessons of Educational Technology

    Directory of Open Access Journals (Sweden)

    Manuela Repetto

    2006-01-01

    Full Text Available Reception of the book "Lessons of Educational Technology." The book contains materials work in certain aspects relevant to the formation of a teacher who is able to meet the challenges of society 'knowledge.

  20. Advances in production technology

    CERN Document Server

    2015-01-01

    This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

  1. Wavelength converter technology

    DEFF Research Database (Denmark)

    Kloch, Allan; Hansen, Peter Bukhave; Poulsen, Henrik Nørskov;

    1999-01-01

    Wavelength conversion is important since it ensures full flexibility of the WDM network layer. Progress in optical wavelength converter technology is reviewed with emphasis on all-optical wavelength converter types based on semiconductor optical amplifiers....

  2. Wavelength converter technology

    DEFF Research Database (Denmark)

    Kloch, Allan; Hansen, Peter Bukhave; Poulsen, Henrik Nørskov;

    1999-01-01

    Wavelength conversion is important since it ensures full flexibility of the WDM network layer. Progress in optical wavelength converter technology is reviewed with emphasis on air-optical wavelength converter types based on semiconductor optical amplifiers....

  3. Handbook of antenna technologies

    CERN Document Server

    Liu, Duixian; Nakano, Hisamatsu; Qing, Xianming; Zwick, Thomas

    2016-01-01

    The Handbook of Antenna Technologies aims to present the rapid development of antenna technologies, particularly in the past two decades, and also showcasing the newly developed technologies and the latest applications. The handbook will provide readers with the comprehensive updated reference information covering theory, modeling and optimization methods, design and measurement, new electromagnetic materials, and applications of antennas. The handbook will widely cover not only all key antenna design issues but also fundamentals, issues related to antennas (transmission, propagation, feeding structure, materials, fabrication, measurement, system, and unique design challenges in specific applications). This handbook will benefit the readers as a full and quick technical reference with a high-level historic review of technology, detailed technical descriptions and the latest practical applications.

  4. Melter Technologies Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Perez, J.M. Jr. [Pacific Northwest National Lab., Richland, WA (United States); Schumacher, R.F. [Savannah River Technology Center, Aiken, SC (United States); Forsberg, C.W. [Oak Ridge National Lab., TN (United States)

    1996-05-01

    The problem of controlling and disposing of surplus fissile material, in particular plutonium, is being addressed by the US Department of Energy (DOE). Immobilization of plutonium by vitrification has been identified as a promising solution. The Melter Evaluation Activity of DOE`s Plutonium Immobilization Task is responsible for evaluating and selecting the preferred melter technologies for vitrification for each of three immobilization options: Greenfield Facility, Adjunct Melter Facility, and Can-In-Canister. A significant number of melter technologies are available for evaluation as a result of vitrification research and development throughout the international communities for over 20 years. This paper describes an evaluation process which will establish the specific requirements of performance against which candidate melter technologies can be carefully evaluated. Melter technologies that have been identified are also described.

  5. Mississippi Technology Transfer Center

    Science.gov (United States)

    1987-01-01

    The Mississippi Technology Transfer Center at the John C. Stennis Space Center in Hancock County, Miss., was officially dedicated in 1987. The center is home to several state agencies as well as the Center For Higher Learning.

  6. Tablet Technologies and Education

    OpenAIRE

    Heidi L. Schnackenberg

    2013-01-01

    Recently, tablet technologies have grown tremendously in popularity. They lend themselves to a myriad of learning modalities and therefore may be well suited to use in schools and universities. While teachers work to find useful applications for tablets, students have already begun using them at home and, in secondary and higher education, in classes. Unfortunately, sometimes when students use tablets for courses they play with “apps,” rather than using the technology as a useful and powerful...

  7. Technology which desires

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sangyook

    2009-03-15

    The table of contents are technology, human and society, Frankenstein, prometheus in modern, modern technology which are pressing human and nature, utopia and dystopia don't come, progressing of bicycle, Edison built the system, clock and human from nano paint to nano machine, diesel locomotive and KTX, airplanes is disappearing, machine is monsters, Taylorism and dream of engineer, union between mass production and public consumption, go away mass production, humanoid and a cyborg and beginning of global village.

  8. Grating image technology

    Science.gov (United States)

    Iwata, Fujio

    1995-07-01

    The word 'grating image' was first named by Toppan Printing Company, Ltd. It means that an image consists of grating dots. In 1988, we presented this new technology at the Optical Security Systems Symposium, in Switzerland. Then it was improved and applied in display application. Recently, it was further applied in 3D video systems. In this report, the development history and the recent situations of grating image technology are described.

  9. Industrial communication technology handbook

    CERN Document Server

    Zurawski, Richard

    2014-01-01

    Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more.New to the Second Edition:46 brand-new chapters and 21 substantially revised chaptersInclusion of the latest, most significant developments in spe

  10. Advanced GPS Technologies (AGT)

    Science.gov (United States)

    2015-05-01

    V Air Force Research Laboratory ••• Advanced GPS Technologies (AGT) Integrity *Service *Excellence 1 May 2015 Kevin Slimak Program Manager...2015 2. REPORT TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Advanced GPS Technologies (AGT) 5a. CONTRACT NUMBER 5b...DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the GPS Partnership

  11. Industry Service - Technology Centre

    DEFF Research Database (Denmark)

    Hollensen, Svend; Grünbaum, Niels Nolsøe

    2011-01-01

    The chapter describes and explains the development of an Industry Service Technology (IS-T) portal solution at Danfoss for testing of products, including booking system for standardised 'service packages' in order to reduce waiting time.......The chapter describes and explains the development of an Industry Service Technology (IS-T) portal solution at Danfoss for testing of products, including booking system for standardised 'service packages' in order to reduce waiting time....

  12. Technology development for safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Dong; Kang, H. Y.; Song, D. Y. [and others

    2005-04-01

    The objective of this project are to establish the safeguards technology of the nuclear proliferation resistance to the facilities which handle with high radioactivity nuclear materials like the spent fuel, to provide the foundation of the technical independency for the establishment of the effective management of domestic spent fuels, and to construct the base of the early introduction of the key technology relating to the back-end nuclear fuel cycle through the development of the safeguards technology of the DFDF of the nuclear non-proliferation. The essential safeguards technologies of the facility such as the measurement and account of nuclear materials and the C/S technology were carried out in this stage (2002-2004). The principal results of this research are the development of error reduction technology of the NDA equipment and a new NDA system for the holdup measurement of process materials, the development of the intelligent surveillance system based on the COM, the evaluation of the safeguardability of the Pyroprocessing facility which is the core process of the nuclear fuel cycle, the derivation of the research and development items which are necessary to satisfy the safeguards criteria of IAEA, and the presentation of the direction of the technology development relating to the future safeguards of Korea. This project is the representative research project in the field of the Korea's safeguards. The safeguards technology and equipment developed while accomplishing this project can be applied to other nuclear fuel cycle facilities as well as DFDF and will be contributed to increase the international confidence in the development of the nuclear fuel cycle facility of Korea and its nuclear transparency.

  13. Department of Reactor Technology

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included.......The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included....

  14. Technology makes life better

    Institute of Scientific and Technical Information of China (English)

    李红

    2015-01-01

    There are many theories about the relationship between technology and society.With the development of world economy,technology has made great progress.However,many changes were taken place in our daily life,especially the appearance of computer.Sending emails,chatting with others online,search for information which is what we need to learn and many other demands in people’s daily life,computers make all of it into possibility.

  15. Technology of Quantum Devices

    CERN Document Server

    Razeghi, Manijeh

    2010-01-01

    Technology of Quantum Devices offers a multi-disciplinary overview of solid state physics, photonics and semiconductor growth and fabrication. Readers will find up-to-date coverage of compound semiconductors, crystal growth techniques, silicon and compound semiconductor device technology, in addition to intersubband and semiconductor lasers. Recent findings in quantum tunneling transport, quantum well intersubband photodetectors (QWIP) and quantum dot photodetectors (QWDIP) are described, along with a thorough set of sample problems.

  16. Maturity in technology

    Directory of Open Access Journals (Sweden)

    L. Alberts

    1988-03-01

    Full Text Available The concept is developed that modern technology, because of its relationship with pure science, can never really become mature, but will always grow as the pool of scientific knowledge grows. Parameters indicating to some extent the degree of technological prowess in a society are compared for a spectrum of countries. It is clear that in spite of some internationally outstanding successes. South Africa must be regarded on average as a developing society.

  17. Hybrid microelectronic technology

    Science.gov (United States)

    Moran, P.

    Various areas of hybrid microelectronic technology are discussed. The topics addressed include: basic thick film processing, thick film pastes and substrates, add-on components and attachment methods, thin film processing, and design of thick film hybrid circuits. Also considered are: packaging hybrid circuits, automating the production of hybrid circuits, application of hybrid techniques, customer's view of hybrid technology, and quality control and assurance in hybrid circuit production.

  18. Information technology made simple

    CERN Document Server

    Carter, Roger

    1991-01-01

    Information Technology: Made Simple covers the full range of information technology topics, including more traditional subjects such as programming languages, data processing, and systems analysis. The book discusses information revolution, including topics about microchips, information processing operations, analog and digital systems, information processing system, and systems analysis. The text also describes computers, computer hardware, microprocessors, and microcomputers. The peripheral devices connected to the central processing unit; the main types of system software; application soft

  19. Advocacy and technology assessment

    Science.gov (United States)

    Jones, E. M.

    1975-01-01

    A highly structured treatment is presented of adversarial systems as they apply to technology assessment. One approach to the problem of adequate criteria of assessment focuses upon the internal operations of assessment entities; operations include problem perception, problem formulation, selection, utilization, determination, and evaluation. Potential contributions of advocacy as a mode of inquiry in technology are discussed; advocacy is evaluated by representative sets of criteria of adequate assessment which include participant criteria, perspectives criteria, situations criteria, base values criteria, and strategies criteria.

  20. Polymer optical motherboard technology

    Science.gov (United States)

    Keil, N.; Yao, H.; Zawadzki, C.; Grote, N.; Schell, M.

    2008-02-01

    In this paper, different hybridly integrated optical devices including optical multiplexer/ demultiplexer and optical transceivers are described. The devices were made using polymer planar light wave circuit (P2LC) technology. Laser diodes, photodiodes, and thin-film filters have been integrated. Key issues involved in this technology, in particular the coupling between laser diodes and polymer waveguides, and between waveguides and photodiodes and also fibers are discussed.

  1. Survey of Web Technologies

    OpenAIRE

    Špoljar, Boris

    2011-01-01

    The World Wide Web bas become an important platform for developing and running applications. A vital process while developing web applications is the choice of web technologies, on which the application will be build. The developers face a dizzying array of platforms, languages, frameworks and technical artifacts to choose from. The decison carries consequences on most other decisions in the development process. Thesis contains analisis, classifications and comparison of web technologies s...

  2. Market Leadership Through Technology

    DEFF Research Database (Denmark)

    Claussen, Jörg; Kretschmer, Tobias; Spengler, Thomas

    .S. market for handheld game consoles, we show that backward compatibility lets incumbents transfer network effects from the old generation to the new to some extent but that it also reduces supply of new software. We examine the tradeoff between technological progress and backward compatibility and find...... that backward compatibility matters less if there is a large technological leap between two generations. We subsequently use our results to assess the role of backward compatibility as a strategy to sustain market leadership....

  3. Broadcast sound technology

    CERN Document Server

    Talbot-Smith, Michael

    1990-01-01

    Broadcast Sound Technology provides an explanation of the underlying principles of modern audio technology. Organized into 21 chapters, the book first describes the basic sound; behavior of sound waves; aspects of hearing, harming, and charming the ear; room acoustics; reverberation; microphones; phantom power; loudspeakers; basic stereo; and monitoring of audio signal. Subsequent chapters explore the processing of audio signal, sockets, sound desks, and digital audio. Analogue and digital tape recording and reproduction, as well as noise reduction, are also explained.

  4. Technology Commercialization Program 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-01

    This reference compilation describes the Technology Commercialization Program of the Department of Energy, Defense Programs. The compilation consists of two sections. Section 1, Plans and Procedures, describes the plans and procedures of the Defense Programs Technology Commercialization Program. The second section, Legislation and Policy, identifies legislation and policy related to the Program. The procedures for implementing statutory and regulatory requirements are evolving with time. This document will be periodically updated to reflect changes and new material.

  5. Recombinant Technology and Probiotics

    OpenAIRE

    Icy D’Silva

    2011-01-01

    Recombinant technology has led the way to monumental advances in the development of useful molecules, including the development of safe probiotics. The development of novel approaches using recombinant technology and probiotics that allow accurate targeting of therapeutics to the mucosa is an interesting area of research. The creation and use of recombinant probiotics expressing recombinantovalbumin, recombinant ovalbumin mutants and yet-to-be-designed recombinant hypo/non-allergenic molecule...

  6. Technology Logic Diagrams

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, M.J. [Univ. of Nevada, Las Vegas NV (United States); O`Brien, M.C. [Univ. of Arizona, Tucson, AZ (United States)

    1995-04-01

    A planning and management tool was developed that relates environmental restoration and waste management problems to technologies that can be used to remediate these problems. Although the Technology Logic Diagram has been widely used within the US Department of Energy`s Office of Environmental Restoration and Waste Management, it can be modified for use during the planning of any waste management and environmental cleanup effort.

  7. Token ring technology report

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. This report provides an overview of the IBM Token-Ring technology and products built by IBM and compatible vendors. It consists of two sections: 1. A summary of the design trade-offs for the IBM Token-Ring. 2. A summary of the products of the major token-ring compatible vendors broken down by adapters and components, wiring systems, testing, and new chip technology.

  8. Endogenous Technological Change

    OpenAIRE

    Paul Romer

    1989-01-01

    Growth in this model is driven by technological change that arises from intentional investment decisions made by profit maximizing agents. The distinguishing feature of the technology as an input is that it is neither a conventional good nor a public good; it is a nonrival, partially excludable good. Because of the nonconvexity introduced by a nonrival good, price-taking competition cannot be supported, and instead, the equilibriumis one with monopolistic competition. The main conclusions are...

  9. Technology of the Guitar

    CERN Document Server

    French, Richard Mark

    2012-01-01

    Featuring chapters on physics, structure, sound and design specifics, Technology of the Guitar also includes coverage of  historical content, composition of strings and their effects on sound quality, and important designs. Additionally, author Mark French discusses case studies of historically significant and technologically innovative instruments. This is a complete reference useful for a broad range of readers including guitar manufacturer employees, working luthiers, and interested guitar enthusiasts who do not have a science or engineering background.

  10. Virtual Campus Hub technology

    DEFF Research Database (Denmark)

    Vercoulen, Frank; Badger, Merete; Monaco, Lucio;

    This deliverable briefly describes which technological components have been delivered for the Virtual Campus Hub and how they can be used. A detailed discussion of the technical details of the components, how they were realized and how they fit the VCH concept can be found in deliverables D5.......4. Virtual Campus Hub Technology Evaluation Report and D6.7 The Virtual Campus Hub Concept....

  11. Energy Technology Innovation

    DEFF Research Database (Denmark)

    Brix, Jacob

    2015-01-01

    Anmeldelse af bogen: Energy Technology Innovation – Learning from Historical Successes and Failures, A. Grubler, C. Wilson (eds.) Cambridge University Press, New York (2014) 387p., ISBN: 978-1-107-02322-2......Anmeldelse af bogen: Energy Technology Innovation – Learning from Historical Successes and Failures, A. Grubler, C. Wilson (eds.) Cambridge University Press, New York (2014) 387p., ISBN: 978-1-107-02322-2...

  12. MOBILE AGENT: EMERGING TECHNOLOGY

    OpenAIRE

    RAJGURU P. V. DR. DESHMUKH S. D

    2011-01-01

    Mobile agent technology has been promoted as an emerging technology that makes it much easier to design, implement, and maintain distributed systems, introduction to basic concepts of mobile agents like agent mobility, agent types and places and agent communication. Then benefits of the usage of mobile agents are summarized and illustrated by selected applications. The next section lists requirements and desirable properties for mobile agent languages and systems. We study the main features, ...

  13. Geolocation Technologies Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Magnoli, D E

    2003-06-02

    This paper is the final report for LL998 In Situ Sensing Subtask 7 (Geo-location) undertaken for NNSA NA-22 enabling technologies R&D for Counterproliferation Detection. A few state-of-the-art resolution parameters are presented for accelerometers, indoor and outdoor GPS (Global Positioning Satellite) systems, and INSs (Inertial Navigation Systems). New technologies are described, including one which has demonstrated the ability to track within a building to a resolution of under a foot.

  14. Market Leadership Through Technology

    DEFF Research Database (Denmark)

    Claussen, Jörg; Kretschmer, Tobias; Spengler, Thomas

    .S. market for handheld game consoles, we show that backward compatibility lets incumbents transfer network effects from the old generation to the new to some extent but that it also reduces supply of new software. We examine the tradeoff between technological progress and backward compatibility and find...... that backward compatibility matters less if there is a large technological leap between two generations. We subsequently use our results to assess the role of backward compatibility as a strategy to sustain market leadership....

  15. Nuclear Reactors and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. [eds.

    1992-01-01

    This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

  16. German energy technology prospects.

    Science.gov (United States)

    Popp, M

    1982-12-24

    After more than 25 years of development of nuclear power and almost 10 years of research and development in numerous areas of nonnuclear energy, there is now a good basis for judging the future prospects of energy technologies in the Federal Republic of Germany. The development of nuclear power has provided an important and economically advantageous new source of energy. Further efforts are needed to establish the nuclear fuel cycle in all stages and to exploit the potential of advanced reactors. In all other areas of energy technology, including energy conservation, new energy sources, and coal, economics has turned out to be the key problem, even at today's energy prices. Opportunities to overcome these economic problems through additional R & D are limited. There is some potential for special applications, and there are many technologies that could contribute to the energy supply of developing countries. In general, however, progress in energy conservation and the use of renewable energy sources will depend on the degree to which energy policy measures can improve their economic basis. For some technologies, such as solar thermal power stations and coal liquefaction, large-scale economic deployment cannot be foreseen today. Instead of establishing costly demonstration projects, emphasis will be put on improving key components of these technologies with the aim of having the most advanced technology available when the economic parameters are more favorable.

  17. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. [ed.

    1992-01-01

    This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  18. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, D.F. (ed.)

    1992-01-01

    This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage the reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.

  19. Versions Of Care Technology

    Directory of Open Access Journals (Sweden)

    Sampsa Hyysalo

    2007-01-01

    Full Text Available The importance of users for innovation has been increasingly emphasized in the literatures on design and management of technology. However, less attention has been given to how people shape technology-in-use. This paper first provides a review of literature on technology use in the social and cultural studies of technology. It then moves to examine empirically how a novel alarm and monitoring appliance was appropriated in the work of home-care nurses and in the everyday living of elderly people. Analysis shows that even these technically unsavvy users shaped the technology considerably by various, even if mundane, acts of adapting it materially, as well as by attributing different meanings to it. However, the paper goes on to argue that such commonplace phrasing of the findings obscures their significance and interrelations. Consequently, the final section of the paper reframes the key findings of this study using the concepts of practice, enactment, and versions of technology to reach a more adequate description.

  20. Turbine imaging technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Moursund, R. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  1. Darwinism determines technological survivors

    Energy Technology Data Exchange (ETDEWEB)

    Bevc, F.; Harkness, S.

    1996-10-01

    In an industry where new power plant planning and budgeting cycles stretch from one to three years, where a typical new generation product takes from five to 10 years to successfully enter the market and where some plants have a 30- to 50-year economic life, change is an evolutionary process. However, that change, driven by the application of new technologies, is inevitable. Twenty-five years ago, in 1971, gas turbines were perceived to have limited applications and were primarily used for part-time peaking duty. Today, they are the baseload, new power generation technology of choice. Nevertheless, more than 55% of the US`s electricity is still generated by coal-fired steam turbine plants, the technology of choice 25 years ago. Power generation technologies will evolve further, but it`s doubtful there will be any new concepts that are not evident in today`s laboratories. Twenty-five years from now, today`s coal-fires team turbine plants will still provide the majority of the electricity generated in the US. However, new natural gas or syngas-fired combined-cycle plants will make up the majority of the new additions, perhaps as much as 20% of the overall installed capacity in 2021. Still, during the next 25 years, a number of new generation technologies should become economically competitive and enter the market. Technologies moving from today`s demonstrations to widespread applications include: gasification, pressurized fluidized bed combustion, fuel cell hybrid cycles, and solar photovoltaics.

  2. Information technology resources assessment

    Energy Technology Data Exchange (ETDEWEB)

    Loken, S.C. [ed.

    1993-01-01

    The emphasis in Information Technology (IT) development has shifted from technology management to information management, and the tools of information management are increasingly at the disposal of end-users, people who deal with information. Moreover, the interactive capabilities of technologies such as hypertext, scientific visualization, virtual reality, video conferencing, and even database management systems have placed in the hands of users a significant amount of discretion over how these resources will be used. The emergence of high-performance networks, as well as network operating systems, improved interoperability, and platform independence of applications will eliminate technical barriers to the use of data, increase the power and range of resources that can be used cooperatively, and open up a wealth of possibilities for new applications. The very scope of these prospects for the immediate future is a problem for the IT planner or administrator. Technology procurement and implementation, integration of new technologies into the existing infrastructure, cost recovery and usage of networks and networked resources, training issues, and security concerns such as data protection and access to experiments are just some of the issues that need to be considered in the emerging IT environment. As managers we must use technology to improve competitiveness. When procuring new systems, we must take advantage of scalable resources. New resources such as distributed file systems can improve access to and efficiency of existing operating systems. In addition, we must assess opportunities to improve information worker productivity and information management through tedmologies such as distributed computational visualization and teleseminar applications.

  3. Sscience & technology review; Science Technology Review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This review is published ten times a year to communicate, to a broad audience, Lawrence Livermore National Laboratory`s scientific and technological accomplishments, particularly in the Laboratory`s core mission areas - global security, energy and the environment, and bioscience and biotechnology. This review for the month of July 1996 discusses: Frontiers of research in advanced computations, The multibeam Fabry-Perot velocimeter: Efficient measurement of high velocities, High-tech tools for the American textile industry, and Rock mechanics: can the Tuff take the stress.

  4. Nigerian Journal of Technological Research

    African Journals Online (AJOL)

    The Nigerian Journal of Technological Research is a pure scientific journal with a ... technology to its immediate environs and the international community. ... and communication Technology; Management and Entrepreneurship sciences.

  5. Wind Technologies & Evolving Opportunities (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Robichaud, R.

    2014-07-01

    This presentation covers opportunities for wind technology; wind energy market trends; an overview of the National Wind Technology Center near Boulder, Colorado; wind energy price and cost trends; wind turbine technology improvements; and wind resource characterization improvements.

  6. IT-BT convergence technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This book explains IT-BT convergence technology as the future technology, which includes a prolog, easy IT-BT convergence technology that has infinite potentials for new value, policy of IT-BT convergence technology showing the potential of smart Korea, IT-BT convergence opening happy future, for the new future of IT powerful nation Korea with IT-BT convergence technology and an epilogue. This book reveals the conception, policy, performance and future of IT-BT convergence technology.

  7. Mapping Technology Space by Normalizing Technology Relatedness Networks

    CERN Document Server

    Alstott, Jeff; Yan, Bowen; Luo, Jianxi

    2015-01-01

    Technology is a complex system, with technologies relating to each other in a space that can be mapped as a network. The technology relatedness network's structure can reveal properties of technologies and of human behavior, if it can be mapped accurately. Technology networks have been made from patent data, using several measures of relatedness. These measures, however, are influenced by factors of the patenting system that do not reflect technologies or their relatedness. We created technology networks that precisely controlled for these impinging factors and normalized them out, using data from 3.9 million patents. The normalized technology relatedness networks were sparse, with only ~20% of technology domain pairs more related than would be expected by chance. Different measures of technology relatedness became more correlated with each other after normalization, approaching a single dimension of technology relatedness. The normalized network corresponded with human behavior: we analyzed the patenting his...

  8. Environmental science and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Program on Environmental Science and Technology developed at the Chemical and Environmental Technology Center comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalysts) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization). The Chemical and Environmental Technology Center was established in 1995, as an evolution of the former Department of Chemistry Engineering (1970). The program on environment science and technology was structured as consequence of the continuous growth of environmental activities on areas related to nuclear programs of IPEN. Moreover, it was an answer to the society concerning the climate changes and biodiversity preservation. All activities of research and development, services, supervision of graduate and under graduated students and courses performance at the center were related to the development, improvement and establishment of new technologies. The highlights of this period (2011 - 2013) were: - Development and use of modern analytical technology for the characterization of persistent pollutants and endocrine disrupters (metals, PAHA’s, PCBs, Pesticides, hormones, surfactants, plasticizer and human pharmaceuticals) in order to evaluate water quality and/or sediments; - Atmospheric chemistry and greenhouse gases: Evaluating an estimation of surface trace gas fluxes from aircraft measurements above the Amazon; - Cooperation with SABESP (Water and Sewage Company) and CETESB (State Environment Agency) in program for the development of public policies; - Studies and development in biodegradable polymers, polyolefins and advanced methods for polymer and rubber recycling and re-use; - Studies

  9. Trusted Computing Technologies, Intel Trusted Execution Technology.

    Energy Technology Data Exchange (ETDEWEB)

    Guise, Max Joseph; Wendt, Jeremy Daniel

    2011-01-01

    We describe the current state-of-the-art in Trusted Computing Technologies - focusing mainly on Intel's Trusted Execution Technology (TXT). This document is based on existing documentation and tests of two existing TXT-based systems: Intel's Trusted Boot and Invisible Things Lab's Qubes OS. We describe what features are lacking in current implementations, describe what a mature system could provide, and present a list of developments to watch. Critical systems perform operation-critical computations on high importance data. In such systems, the inputs, computation steps, and outputs may be highly sensitive. Sensitive components must be protected from both unauthorized release, and unauthorized alteration: Unauthorized users should not access the sensitive input and sensitive output data, nor be able to alter them; the computation contains intermediate data with the same requirements, and executes algorithms that the unauthorized should not be able to know or alter. Due to various system requirements, such critical systems are frequently built from commercial hardware, employ commercial software, and require network access. These hardware, software, and network system components increase the risk that sensitive input data, computation, and output data may be compromised.

  10. Advanced Situation Awareness Technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Situation Awareness Technologies (ASAT) will facilitate exploration of the moon surface, and other planetary bodies. This powerful technology will also find...

  11. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  12. Methods and Technologies Branch (MTB)

    Science.gov (United States)

    The Methods and Technologies Branch focuses on methods to address epidemiologic data collection, study design and analysis, and to modify technological approaches to better understand cancer susceptibility.

  13. Society for Assisted Reproductive Technology

    Science.gov (United States)

    The Society for Assisted Reproductive Technology PATIENTS Patient Information What Is SART? Risks of IVF Third Party Reproduction A Patient's Guide to Assisted Reproductive Technology Frequently Asked ...

  14. Space Technology Research Grants Program

    Data.gov (United States)

    National Aeronautics and Space Administration — The Space Technology Research Grants Program will accelerate the development of "push" technologies to support the future space science and exploration...

  15. Ceramic Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

  16. Technologies for lake restoration

    Directory of Open Access Journals (Sweden)

    Helmut KLAPPER

    2003-09-01

    Full Text Available Lakes are suffering from different stress factors and need to be restored using different approaches. The eutrophication remains as the main water quality management problem for inland waters: both lakes and reservoirs. The way to curb the degradation is to stop the nutrient sources and to accelerate the restoration with help of in-lake technologies. Especially lakes with a long retention time need (eco- technological help to decrease the nutrient content in the free water. The microbial and other organic matter from sewage and other autochthonous biomasses, causes oxygen depletion, which has many adverse effects. In less developed countries big reservoirs function as sewage treatment plants. Natural aeration solves problems only partly and many pollutants tend to accumulate in the sediments. The acidification by acid rain and by pyrite oxidation has to be controlled by acid neutralizing technologies. Addition of alkaline chemicals is useful only for soft waters, and technologies for (microbial alkalinization of very acidic hardwater mining lakes are in development. The corrective measures differ from those in use for eutrophication control. The salinization and water shortage mostly occurs if more water is used than available. L. Aral, L. Tschad, the Dead Sea or L. Nasser belong to waters with most severe environmental problems on a global scale. Their hydrologic regime needs to be evaluated. The inflow of salt water at the bottom of some mining lakes adds to stability of stratification, and thus accumulation of hydrogen sulphide in the monimolimnion of the meromictic lakes. Destratification, which is the most used technology, is only restricted applicable because of the dangerous concentrations of the byproducts of biological degradation. The contamination of lakes with hazardous substances from industry and agriculture require different restoration technologies, including subhydric isolation and storage, addition of nutrients for better self

  17. Securing smart grid technology

    Science.gov (United States)

    Chaitanya Krishna, E.; Kosaleswara Reddy, T.; Reddy, M. YogaTeja; Reddy G. M., Sreerama; Madhusudhan, E.; AlMuhteb, Sulaiman

    2013-03-01

    In the developing countries electrical energy is very important for its all-round improvement by saving thousands of dollars and investing them in other sector for development. For Growing needs of power existing hierarchical, centrally controlled grid of the 20th Century is not sufficient. To produce and utilize effective power supply for industries or people we should have Smarter Electrical grids that address the challenges of the existing power grid. The Smart grid can be considered as a modern electric power grid infrastructure for enhanced efficiency and reliability through automated control, high-power converters, modern communications infrastructure along with modern IT services, sensing and metering technologies, and modern energy management techniques based on the optimization of demand, energy and network availability and so on. The main objective of this paper is to provide a contemporary look at the current state of the art in smart grid communications as well as critical issues on smart grid technologies primarily in terms of information and communication technology (ICT) issues like security, efficiency to communications layer field. In this paper we propose new model for security in Smart Grid Technology that contains Security Module(SM) along with DEM which will enhance security in Grid. It is expected that this paper will provide a better understanding of the technologies, potential advantages and research challenges of the smart grid and provoke interest among the research community to further explore this promising research area.

  18. Technology Roadmap: Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-03-01

    Energy storage technologies are valuable components in most energy systems and could be an important tool in achieving a low-carbon future. These technologies allow for the decoupling of energy supply and demand, in essence providing a valuable resource to system operators. There are many cases where energy storage deployment is competitive or near-competitive in today's energy system. However, regulatory and market conditions are frequently ill-equipped to compensate storage for the suite of services that it can provide. Furthermore, some technologies are still too expensive relative to other competing technologies (e.g. flexible generation and new transmission lines in electricity systems). One of the key goals of this new roadmap is to understand and communicate the value of energy storage to energy system stakeholders. This will include concepts that address the current status of deployment and predicted evolution in the context of current and future energy system needs by using a ''systems perspective'' rather than looking at storage technologies in isolation.

  19. Small engine technology programs

    Science.gov (United States)

    Niedzwiecki, Richard W.

    1990-01-01

    Described here is the small engine technology program being sponsored at the Lewis Research Center. Small gas turbine research is aimed at general aviation, commuter aircraft, rotorcraft, and cruise missile applications. The Rotary Engine program is aimed at supplying fuel flexible, fuel efficient technology to the general aviation industry, but also has applications to other missions. The Automotive Gas Turbine (AGT) and Heavy-Duty Diesel Transport Technology (HDTT) programs are sponsored by DOE. The Compound Cycle Engine program is sponsored by the Army. All of the programs are aimed towards highly efficient engine cycles, very efficient components, and the use of high temperature structural ceramics. This research tends to be generic in nature and has broad applications. The HDTT, rotary technology, and the compound cycle programs are all examining approaches to minimum heat rejection, or 'adiabatic' systems employing advanced materials. The AGT program is also directed towards ceramics application to gas turbine hot section components. Turbomachinery advances in the gas turbine programs will benefit advanced turbochargers and turbocompounders for the intermittent combustion systems, and the fundamental understandings and analytical codes developed in the research and technology programs will be directly applicable to the system projects.

  20. Transmutation Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Song, T. Y.; Park, W. S.; Kim, Y. H. (and others)

    2007-06-15

    The spent fuel coming from the PWR is one of the most difficult problems to be solved for the continuous use of nuclear power. It takes a few million years to be safe under the ground. Therefore, it is not easy to take care of the spent fuel for such a long time. Transmutation technology is the key technology which can solve the spent fuel problem basically. Transmutation is to transmute long-lived radioactive nuclides in the spent fuel into short-lived or stable nuclide through nuclear reactions. The long-lived radioactive nuclides can be TRU and fission products such as Tc-99 and I-129. Although the transmutation technology does not make the underground disposal totally unnecessary, the period to take care of the spent fuel can be reduced to the order of a few hundred years. In addition to the environmental benefit, transmutation can be considered to recycle the energy in the spent fuel since the transmutation is performed through nuclear fission reaction of the TRU in the spent fuel. Therefore, transmutation technology is worth being developed in economical aspect. The results of this work can be a basis for the next stage research. The objective of the third stage research was to complete the core conceptual design and verification of the key technologies. The final results will contribute to the establishment of Korean back end fuel cycle policy by providing technical guidelines.

  1. Technology transfer within the telecare technology innovation system

    NARCIS (Netherlands)

    Vlies, R.D. van der; Felix, E.

    2013-01-01

    Telecare technology is not common yet, although it is perceived as promising. Most studies on telecare technology transfer present a case involving the use of a single methodology and approach during some steps of technology transfer. Technology transfer models cannot be sensibly constructed if they

  2. Philosophy of Technology Assumptions in Educational Technology Leadership

    Science.gov (United States)

    Webster, Mark David

    2017-01-01

    A qualitative study using grounded theory methods was conducted to (a) examine what philosophy of technology assumptions are present in the thinking of K-12 technology leaders, (b) investigate how the assumptions may influence technology decision making, and (c) explore whether technological determinist assumptions are present. Subjects involved…

  3. Mini Technology Manual for Schools: An Introduction to Technology Integration

    Science.gov (United States)

    Grismore, Brian A.

    2012-01-01

    The purpose of this manual is to assist school leaders in beginning or developing the use of educational technology within their school or district. The manual covers topics: 1) advantages of educational technology; 2) types of technology used for learning and teaching; 3) how to make good decisions about the use of technology in schools; 4) the…

  4. Philosophy of Technology Assumptions in Educational Technology Leadership

    Science.gov (United States)

    Webster, Mark David

    2017-01-01

    A qualitative study using grounded theory methods was conducted to (a) examine what philosophy of technology assumptions are present in the thinking of K-12 technology leaders, (b) investigate how the assumptions may influence technology decision making, and (c) explore whether technological determinist assumptions are present. Subjects involved…

  5. Understanding Technology Literacy: A Framework for Evaluating Educational Technology Integration

    Science.gov (United States)

    Davies, Randall S.

    2011-01-01

    Federal legislation in the United States currently mandates that technology be integrated into school curricula because of the popular belief that learning is enhanced through the use of technology. The challenge for educators is to understand how best to teach with technology while developing the technological expertise of their students. This…

  6. Technology Transfer Issues and a New Technology Transfer Model

    Science.gov (United States)

    Choi, Hee Jun

    2009-01-01

    The following are major issues that should be considered for efficient and effective technology transfer: conceptions of technology, technological activity and transfer, communication channels, factors affecting transfer, and models of transfer. In particular, a well-developed model of technology transfer could be used as a framework for…

  7. Dielectric heating. Technologies; Chauffage dielectrique. Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Roussy, G. [Universite Henri-Poincare, Dir. de Recherche, 54 - Nancy (France); Rochas, J.F. [Societe Sairem, 69 - Lyon (France); Oberlin, C. [Electricite de France (EDF), 75 - Paris (France)

    2003-08-01

    The electrothermal heating processes are of two types: the indirect heating (indirect resistance, infrared, indirect arc and plasma heating) in which the energy transfer from the source to the receptor complies with the usual thermal laws, and the direct heating (direct ohmic, induction, high-frequency, microwave, electron bombardment, laser and direct arc heating) in which the receptor is crossed by an electric current which generates a heat release inside the receptor. This paper treats of the technologies used in high frequency and microwave heating: 1 - techniques of implementation of high-frequency (HF) heating: HF generator, energy transmission line, HF applicator, impedance adjustment system, auxiliary devices; 2 - techniques of implementation of microwave heating: microwave generator, wave guide, microwave applicator, impedance adjustment circuit, auxiliary devices. (J.S.)

  8. Wind energy technology developments

    DEFF Research Database (Denmark)

    Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard

    2014-01-01

    turbine blades and towers are very large series-produced components, which costs and quality are strongly dependent on the manufacturing methods. The industrial wind energy sector is well developed in Denmark, and the competitive advantage of the Danish sector and the potential for job creation......This chapter describes the present mainstream development of the wind turbine technology at present. The turbine technology development trend is characterized by up-scaling to turbines with larger capacity for both onshore and offshore applications, larger rotors and new drivetrain solution......, including the direct-drive solution without gearbox. The technology solutions are strongly influenced by the development of the international industry with a global market for components and a trend towards a “shared” development effort in collaboration between the OEM’s and component sub-suppliers. Wind...

  9. Technology and Sport

    DEFF Research Database (Denmark)

    Møller, Rasmus Bysted; Møller, Verner

    2015-01-01

    The relationship between sport and technology is close and can be both fruitful and destructive. Technology has a constitutive function in sport as it makes the activity possible and it can enhance performance as well as the sporting experience. The use of football boots is clearly more comfortable...... and effective than playing in bare feet in a game of football. However, sport challenges its athletes by demanding the employment of less efficient means rather than more efficient means in pursuit of sport specific goals. Therefore technology can potentially subtract from the sporting experience and even...... threaten the internal logic of sport. If as an example very efficient hail cartridges were allowed for use in double trap shooting it would reduce the skills required to excel at that discipline reducing its value for participants and spectators alike. The use of forbidden performance enhancing substances...

  10. Drying and energy technologies

    CERN Document Server

    Lima, A

    2016-01-01

    This book provides a comprehensive overview of essential topics related to conventional and advanced drying and energy technologies, especially motivated by increased industry and academic interest. The main topics discussed are: theory and applications of drying, emerging topics in drying technology, innovations and trends in drying, thermo-hydro-chemical-mechanical behaviors of porous materials in drying, and drying equipment and energy. Since the topics covered are inter- and multi-disciplinary, the book offers an excellent source of information for engineers, energy specialists, scientists, researchers, graduate students, and leaders of industrial companies. This book is divided into several chapters focusing on the engineering, science and technology applied in essential industrial processes used for raw materials and products.

  11. Technology Roadmap: Hydropower

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Hydropower could double its contribution by 2050, reaching 2,000 GW of global capacity and over 7,000 TWh. This achievement, driven primarily by the quest of clean electricity, could prevent annual emissions of up to 3 billion tonnes of CO2 from fossil-fuel plants. The bulk of this growth would come from large plants in emerging economies and developing countries. Hydroelectricity’s many advantages include reliability, proven technology, large storage capacity, and very low operating and maintenance costs. Hydropower is highly flexible, a precious asset for electricity network operators, especially given rapid expansion of variable generation from other renewable energy technologies such as wind power and photovoltaics. Many hydropower plants also provide flood control, irrigation, navigation and freshwater supply. The technology roadmap for Hydropower details action needed from policy makers to allow hydroelectric production to double, and addresses necessary conditions, including resolving environmental issues and gaining public acceptance.

  12. Electron Technology: ELTE 2016

    Science.gov (United States)

    Pisarkiewicz, Tadeusz; Kucewicz, Wojciech

    2016-12-01

    In this paper we present a review of research results and technical accomplishments presented by researchers from technical universities, governmental institutes and research companies during the XIIth Scientific Conference Electron Technology, ELTE 2016. This review is based on materials presented at four topical conference sessions: Microelectronics and Nanoelectronics, Photonics, Materials and Technologies, and Microsystems and also on materials presented by invited speakers at two dedicated sessions. Oral sessions were accompanied by the poster sessions. In effect about 50 papers gathered in this volume reflect the topics discussed at the Conference. A short description of technological and measurement possibilities in the laboratories of Academic Centre for Materials and Nanotechnology and also in the Department of Electronics of the Faculty of Computer Science, Electronics and Telecommunications AGH UST are given.

  13. Multi-technology positioning

    CERN Document Server

    Lohan, Elena-Simona; Wymeersch, Henk; Seco-Granados, Gonzalo; Nykänen, Ossi

    2017-01-01

    This book provides an overview of positioning technologies, applications and services in a format accessible to a wide variety of readers. Readers who have always wanted to understand how satellite-based positioning, wireless network positioning, inertial navigation, and their combinations work will find great value in this book. Readers will also learn about the advantages and disadvantages of different positioning methods, their limitations and challenges. Cognitive positioning, adding the brain to determine which technologies to use at device runtime, is introduced as well. Coverage also includes the use of position information for Location Based Services (LBS), as well as context-aware positioning services, designed for better user experience. • Brings understanding of positioning technology to readers from a variety of disciplines • Reviews multiple techniques, providing insight on the pros, cons and challenges related to each • Designed to be a tutorial on basic principles, avoiding unnecessary de...

  14. Technologic advances in endodontics.

    Science.gov (United States)

    Mortman, Rory E

    2011-07-01

    This article addresses technologic advances in endodontics pertaining to new and emerging technology. Cone-beam computed tomography and optical occurrence tomography are 2 new imaging technologies that can assist the practitioner in the diagnosis of pulpal disease. The self-adjusting file and the Apexum device can be used for instrumentation and bulk debridement of an apical lesion, respectively. Neodymium:yttrium-aluminum-garnet laser, erbium:chromium:yttrium-scandium-gallium-garnet laser, EndoActivator, EndoVac, and light-activated disinfection may assist the practitioner in cleaning the root canal system. Computed tomography-guided surgery shows promise in making endodontic surgery easier, as does mineral trioxide aggregate cement for regenerative endodontic procedures.

  15. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    Enterprise Systems Management (ESM) and Business Pro- cess Management (BPM), although highly correlated, have evolved as alternative and mutually exclusive approaches to corporate infrastruc- ture. As a result, companies struggle to nd the right balance between technology and process factors...... in infrastructure implementation projects. The purpose of this paper is articulate a need and a direction to medi- ate between the process-driven and the technology-driven approaches. Using a cross-case analysis, we gain insight into two examples of sys- tems and process implementation. We highlight the dierences...... between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...

  16. Minerals in environmental technology

    Energy Technology Data Exchange (ETDEWEB)

    Schuiling, R.D. [Utrecht Univ., Utrecht (Netherlands). Faculty of Earth Sciences

    2000-07-01

    Minerals play a key role in the environment; this role is often not well understood, because the emphasis of most environmentalists is on air, water, or the composition of solid wastes as a whole, without paying attention to their mineralogical composition. Several minerals can serve as effective and cheap adsorbents for many toxic chemicals. Several minerals can be used as a cheap substitute for expensive chemicals in environmental technologies. Environmental technologies that produce an economically interesting mineral will have an edge over competing technologies. Most of the problems, overreaction, panicky and expensive measures with regard to exposure from quartz and asbestos stem from a poor understanding of natural levels of common contaminants, a disregard for mineralogy, and a lack of insight into natural processes in general.

  17. Metalcasting Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1998-01-01

    The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap outlines key goals for products and markets, materials technology, manufacturing technology, environmental technology, human resources, and industry health programs. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry.

  18. Cell-SELEX Technology

    Science.gov (United States)

    2012-01-01

    Abstract Aptamers are molecules identified from large combinatorial nucleic acid libraries by their high affinity to target molecules. Due to a variety of desired properties, aptamers are attractive alternatives to antibodies in molecular biology and medical applications. Aptamers are identified through an iterative selection–amplification process known as systematic evolution of ligands by exponential enrichment (SELEX). Although SELEX is typically carried out using purified target molecules, whole live cells are also employable as selection targets. This technology, Cell-SELEX, has several advantages. For example, generated aptamers are functional with a native conformation of the target molecule on live cells, and thus, cell surface transmembrane proteins would be targets even when their purifications in native conformations are difficult. In addition, cell-specific aptamers can be obtained without any knowledge about cell surface molecules on the target cells. Here, I review the progress of Cell-SELEX technology and discuss advantages of the technology. PMID:23515081

  19. Technological Aspects: High Voltage

    CERN Document Server

    Faircloth, D C

    2013-01-01

    This paper covers the theory and technological aspects of high-voltage design for ion sources. Electric field strengths are critical to understanding high-voltage breakdown. The equations governing electric fields and the techniques to solve them are discussed. The fundamental physics of high-voltage breakdown and electrical discharges are outlined. Different types of electrical discharges are catalogued and their behaviour in environments ranging from air to vacuum are detailed. The importance of surfaces is discussed. The principles of designing electrodes and insulators are introduced. The use of high-voltage platforms and their relation to system design are discussed. The use of commercially available high-voltage technology such as connectors, feedthroughs and cables are considered. Different power supply technologies and their procurement are briefly outlined. High-voltage safety, electric shocks and system design rules are covered.

  20. Developing human technology curriculum

    Directory of Open Access Journals (Sweden)

    Teija Vainio

    2012-10-01

    Full Text Available During the past ten years expertise in human-computer interaction has shifted from humans interacting with desktop computers to individual human beings or groups of human beings interacting with embedded or mobile technology. Thus, humans are not only interacting with computers but with technology. Obviously, this shift should be reflected in how we educate human-technology interaction (HTI experts today and in the future. We tackle this educational challenge first by analysing current Master’s-level education in collaboration with two universities and second, discussing postgraduate education in the international context. As a result, we identified core studies that should be included in the HTI curriculum. Furthermore, we discuss some practical challenges and new directions for international HTI education.

  1. Technology transfer 1995

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    Technology Transfer 1995 is intended to inform the US industrial and academic sectors about the many opportunities they have to form partnerships with the US Department of Energy (DOE) for the mutual advantage of the individual institutions, DOE, and the nation as a whole. It also describes some of the growing number of remarkable achievements resulting from such partnerships. These partnership success stories offer ample evidence that Americans are learning how to work together to secure major benefits for the nation--by combining the technological, scientific, and human resources resident in national laboratories with those in industry and academia. The benefits include more and better jobs for Americans, improved productivity and global competitiveness for technology-based industries, and a more efficient government laboratory system.

  2. Hybrid propulsion technology program

    Science.gov (United States)

    1990-01-01

    Technology was identified which will enable application of hybrid propulsion to manned and unmanned space launch vehicles. Two design concepts are proposed. The first is a hybrid propulsion system using the classical method of regression (classical hybrid) resulting from the flow of oxidizer across a fuel grain surface. The second system uses a self-sustaining gas generator (gas generator hybrid) to produce a fuel rich exhaust that was mixed with oxidizer in a separate combustor. Both systems offer cost and reliability improvement over the existing solid rocket booster and proposed liquid boosters. The designs were evaluated using life cycle cost and reliability. The program consisted of: (1) identification and evaluation of candidate oxidizers and fuels; (2) preliminary evaluation of booster design concepts; (3) preparation of a detailed point design including life cycle costs and reliability analyses; (4) identification of those hybrid specific technologies needing improvement; and (5) preperation of a technology acquisition plan and large scale demonstration plan.

  3. Small Artifacts - Big Technologies

    DEFF Research Database (Denmark)

    Kreiner, Kristian

    2005-01-01

    The computer IC is the heart of the information and telecommunication technology. It is a tiny artifact, but with incredible organizing powers. We use this physical artifact as the location for studying central problems of the knowledge economy. First, the paper describes the history of chip design...... and the emergence of the technological community involved in designing and manufacturing computer chips. The community is structured in a way that reflects the underlying physical nature silicon and the numerous other materials and chemicals involved. But it also reflects the human agency of defining new projects...... instrument. It is found that technological progress is not hindered, but rather aided by the use of imperfect principles, abstractions and representations of reality. The power of such imperfections is discussed and generalized....

  4. IGCC technology and demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Palonen, J. [A. Ahlstrom Corporation, Karhula (Finland). Hans Ahlstrom Lab.; Lundqvist, R.G. [A. Ahlstrom Corporation, Helsinki (Finland); Staahl, K. [Sydkraft AB, Malmoe (Sweden)

    1996-12-31

    Future energy production will be performed by advanced technologies that are more efficient, more environmentally friendly and less expensive than current technologies. Integrated gasification combined cycle (IGCC) power plants have been proposed as one of these systems. Utilising biofuels in future energy production will also be emphasised since this lowers substantially carbon dioxide emissions into the atmosphere due to the fact that biomass is a renewable form of energy. Combining advanced technology and biomass utilisation is for this reason something that should and will be encouraged. A. Ahlstrom Corporation of Finland and Sydkraft AB of Sweden have as one part of company strategies adopted this approach for the future. The companies have joined their resources in developing a biomass-based IGCC system with the gasification part based on pressurised circulating fluidized-bed technology. With this kind of technology electrical efficiency can be substantially increased compared to conventional power plants. As a first concrete step, a decision has been made to build a demonstration plant. This plant, located in Vaernamo, Sweden, has already been built and is now in commissioning and demonstration stage. The system comprises a fuel drying plant, a pressurised CFB gasifier with gas cooling and cleaning, a gas turbine, a waste heat recovery unit and a steam turbine. The plant is the first in the world where the integration of a pressurised gasifier with a gas turbine will be realised utilising a low calorific gas produced from biomass. The capacity of the Vaernamo plant is 6 MW of electricity and 9 MW of district heating. Technology development is in progress for design of plants of sizes from 20 to 120 MWe. The paper describes the Bioflow IGCC system, the Vaernamo demonstration plant and experiences from the commissioning and demonstration stages. (orig.)

  5. CONVERGENCE OF TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    R. Siriram

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Technology is a catalyst for competitive advantage. However, it is how technology is used that leads to a firm’s improved performance. In this article, an investigative framework is constructed to understand better what strategically drives new technology adoption. The strategic drivers include technology and business strategy alignment, better technology planning and selection of new technologies, the effects on a firm’s culture and climate, links to a firm’s organisational and environmental evolution, and benefits through convergence and collaboration. Using an investigative framework, it is shown how the strategic drivers link to improve a firm’s performance, producing competitive advantage. The investigative framework is tested using structural equation modelling. Various hypotheses are formed, and recommendations for further research are made.

    AFRIKAANSE OPSOMMING: Tegnologie is ‘n katalisator vir mededingende voordeel. Dit is egter hoe tegnologie aangewend word wat aanleiding gee tot ‘n onderneming se verbeterde prestasie. In hierdie artikel word ‘n ondersoekende raamwerk gekonstrueer om insig te kry in dit wat die aanvaarding van nuwe tegnologie strategies dryf. Die strategiese dryfvere sluit in die belyning van tegnologie en ondernemingstrategie, beter tegnologiebeplanning en seleksie van nuwe tegnologieë, die effek op ‘n onderneming se kultuur en klimaat, koppeling na ‘n onderneming se organisatoriese en omgewingsevolusie, en voordele verkry deur konvergensie en samewerking. Deur ‘n ondersoekende raamwerk te gebruik, word daar getoon dat die strategiese dryfvere koppel om ‘n onderneming se prestasie te verbeter en sodoende ‘n mededingende voordeel te skep. Die raamwerk word getoets en hipoteses geformuleer waarna aanbevelings oor verdere navorsing aan die hand gedoen word.

  6. State Technologies Advancement Collaborative

    Energy Technology Data Exchange (ETDEWEB)

    David S. Terry

    2012-01-30

    The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligating funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy

  7. Passive solar technology

    Energy Technology Data Exchange (ETDEWEB)

    Watson, D

    1981-04-01

    The present status of passive solar technology is summarized, including passive solar heating, cooling and daylighting. The key roles of the passive solar system designer and of innovation in the building industry are described. After definitions of passive design and a summary of passive design principles are given, performance and costs of passive solar technology are discussed. Passive energy design concepts or methods are then considered in the context of the overall process by which building decisions are made to achieve the integration of new techniques into conventional design. (LEW).

  8. Introduction to laser technology

    CERN Document Server

    Hitz, C Breck; Hecht, Jeff; Hitz, C Breck; John Wiley & Sons

    2001-01-01

    Electrical Engineering Introduction to Laser Technology , Third Edition. Would you like to know how a laser works, and how it can be modified for your own specific tasks? This intuitive third edition-previously published as Understanding Laser Technology , First and Second Editions-introduces engineers, scientists, technicians, and novices alike to the world of modern lasers, without delving into the mathematical details of quantum electronics. It is the only introductory text on the market today that explains the underlying physics and engineering applicable to all lasers. A unique combinatio.

  9. Handbook of surveillance technologies

    CERN Document Server

    Petersen, JK

    2012-01-01

    From officially sanctioned, high-tech operations to budget spy cameras and cell phone video, this updated and expanded edition of a bestselling handbook reflects the rapid and significant growth of the surveillance industry. The Handbook of Surveillance Technologies, Third Edition is the only comprehensive work to chronicle the background and current applications of the full-range of surveillance technologies--offering the latest in surveillance and privacy issues.Cutting-Edge--updates its bestselling predecessor with discussions on social media, GPS circuits in cell phones and PDAs, new GIS s

  10. Science and technology

    CERN Document Server

    Chorafas, Dimitris N

    2014-01-01

    The aim of this book is to explore science and technology from the viewpoint of creating new knowledge, as opposed to the reinterpretation of existing knowledge in ever greater but uncertain detail. Scientists and technologists make progress by distinguishing between what they regard as meaningful and what they consider as secondary or unimportant. The meaningful is dynamic; typically, the less important is static. Science and technology have made a major contribution to the culture and to the standard of living of our society. From antiquity to the present day, the most distinguished scientis

  11. Handbook of display technology

    CERN Document Server

    Castellano, Joseph A

    1992-01-01

    This book presents a comprehensive review of technical and commercial aspects of display technology. It provides design engineers with the information needed to select proper technology for new products. The book focuses on flat, thin displays such as light-emitting diodes, plasma display panels, and liquid crystal displays, but it also includes material on cathode ray tubes. Displays include a large number of products from televisions, auto dashboards, radios, and household appliances, to gasoline pumps, heart monitors, microwave ovens, and more.For more information on display tech

  12. Quantum Communication Technology

    CERN Document Server

    Gisin, Nicolas

    2010-01-01

    Quantum communication is built on a set of disruptive concepts and technologies. It is driven by fascinating physics and by promising applications. It requires a new mix of competencies, from telecom engineering to theoretical physics, from theoretical computer science to mechanical and electronic engineering. First applications have already found their way to niche markets and university labs are working on futuristic quantum networks, but most of the surprises are still ahead of us. Quantum communication, and more generally quantum information science and technologies, are here to stay and will have a profound impact on the XXI century.

  13. Technology Roadmaps: Wind Energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Wind energy is perhaps the most advanced of the 'new' renewable energy technologies, but there is still much work to be done. This roadmap identifies the key tasks that must be undertaken in order to achieve a vision of over 2 000 GW of wind energy capacity by 2050. Governments, industry, research institutions and the wider energy sector will need to work together to achieve this goal. Best technology and policy practice must be identified and exchanged with emerging economy partners, to enable the most cost-effective and beneficial development.

  14. Smart space technology innovations

    CERN Document Server

    Chen, Mu-Yen

    2013-01-01

    Recently, ad hoc and wireless communication technologies have made available the device, service and information rich environment for users. Smart Space and ubiquitous computing extend the ""Living Lab"" vision of everyday objects and provide context-awareness services to users in smart living environments. This ebook investigates smart space technology and its innovations around the Living Labs. The final goal is to build context-awareness smart space and location-based service applications that integrate information from independent systems which autonomously and securely support human activ

  15. Energy and technology review

    Energy Technology Data Exchange (ETDEWEB)

    Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O' Neal, E.; Van Dyke, P. (eds.)

    1982-07-01

    The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs. (GHT)

  16. The Ultimate Technology

    DEFF Research Database (Denmark)

    Riis, Søren

    2013-01-01

    One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However, by reinterp......One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However...

  17. Organisational Learning with Technology

    DEFF Research Database (Denmark)

    Hundebøl, Jesper

    2008-01-01

    Based on multi-site ethno-methodological field studies in the Danish construction industry this paper examines the relational effects of 3D object-based modelling. In describing how that technology is being introduced, shaped and enacted, how it associates with, mediates and translates existing...... practices, I discuss how it has effects for work methods and routines in an (inter-)organisational setting, namely that of architects and consulting engineers. The technology is introduced in the practices in question, in part because of a program referred to as Det Digitale Byggeri (Digital Construction...

  18. Script of Healthcare Technology

    DEFF Research Database (Denmark)

    Brodersen, Søsser Grith Kragh; Hansen, Meiken; Lindegaard, Hanne

    2015-01-01

    ABSTRACT Many new product designs are currently being implemented in the healthcare sector, and this presents designers with challenges involved in socially innovative design. In this paper, we argue that designing assistive technologies requires focus on multiple users and use practices. We see...... the design of assistive technologies as design of socio-material assemblies , which include an analysis of the products already used in relation to multiple users, their practices and wishes. In the article we focus on the challenges in the implementation of two types of robotic beds used for disability care...

  19. Computational color technology

    CERN Document Server

    Kang, Henry R

    2006-01-01

    Henry Kang provides the fundamental color principles and mathematical tools to prepare the reader for a new era of color reproduction, and for subsequent applications in multispectral imaging, medical imaging, remote sensing, and machine vision. This book is intended to bridge the gap between color science and computational color technology, putting color adaptation, color constancy, color transforms, color display, and color rendition in the domain of vector-matrix representations and theories. Computational Color Technology deals with color digital images on the spectral level using vector-m

  20. Selective Reproductive Technologies

    DEFF Research Database (Denmark)

    Gammeltoft, Tine; Wahlberg, Ayo

    2014-01-01

    selective reproduction has been placed under the aegis of science and expertise in novel ways. New laboratory and clinical techniques allow for the selective fertilization of gametes, implantation of embryos, or abortion of fetuses. Although they will often overlap with assisted reproductive technologies...... (ARTs), what we term selective reproductive technologies (SRTs) are of a more specific nature: Rather than aiming to overcome infertility, they are used to prevent or allow the birth of certain kinds of children. This review highlights anthropological research into SRTs in different parts of the world...