WorldWideScience

Sample records for technologies etude detaillee

  1. Detailed study of transmutation scenarios involving present day reactor technologies; Etude detaillee des scenarios de transmutation faisant appel aux technologies actuelles pour les reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This document makes a detailed technical evaluation of three families of separation-transmutation scenarios for the management of radioactive wastes. These scenarios are based on 2 parks of reactors which recycle plutonium and minor actinides in an homogeneous way. A first scenario considers the multi-recycling of Pu and Np and the mono-recycling of Am and Cm using both PWRs and FBRs. A second scenario is based on PWRs only, while a third one considers FBRs only. The mixed PWR+FBR scenario requires innovative options and gathers more technical difficulties due to the americium and curium management in a minimum flux of materials. A particular attention has been given to the different steps of the fuel cycle (fuels and targets fabrication, burnup, spent fuel processing, targets management). The feasibility of scenarios of homogeneous actinides recycling in PWRs-only and in FBRs-only has been evaluated according to the results of the first scenario: fluxes of materials, spent fuel reprocessing by advanced separation, impact of the presence of actinides on PWRs and FBRs operation. The efficiency of the different scenarios on the abatement of wastes radio-toxicity is presented in conclusion. (J.S.)

  2. Technological study of organic fluids; Etudes technologiques des fluides caloporteurs organique

    Energy Technology Data Exchange (ETDEWEB)

    Leveque, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Under contract to EURATOM (MM. VAN der VENNE and HANNAERT), the C.E.A. and the Progil Society have collaborated on a technological study of the terphenyls. The results obtained from the radiolysis and pyrolysis of the product OM2 (70 p. 100 m-terphenyl, 25 p. 100 o-terphenyl, 5 p. 100 p-terphenyl) are reported. Using two pile loops at temperatures up to 450 deg. C, a phenomena of accelerated pyrolysis on the radiolized material has been demonstrated. Some by-products of the petroleum industry have also been studied, with a view to finding substitutes for terphenyl. (author) [French] Le C.E.A. et la Societe PROGIL ont entrepris en commun sous contrat EURATOM (MM. VAN der VENNE et HANNAERT) une etude technologique des terphenyles. Les resultats de radiolyse et de pyrolyse obtenus sur le produit OM2 (70 p. 100 m-terphenyle, 25 p. 100 o-terphenyle. 5 p. 100 de p-terphenyle) sont exposes. L'exploitation de deux boucles en pile jusqu'a des temperatures de 450 deg. C a mis en evidence un phenomene de pyrolyse acceleree sur le produit radiolyse. On a etudie egalement quelques sous-produits de l'industrie petroliere dans le but de trouver des substituts au terphenyle. (auteur)

  3. Generalities on the dynamic behaviour of rapid reactors. Preliminary studies on Rapsodie; Generalites sur le comportement dynamique des piles rapides. Etudes preliminaires de rapsodie

    Energy Technology Data Exchange (ETDEWEB)

    Campan, J.L.; Chaumont, J.P.; Clauzon, P.P.; Ghesquiere, G.; Leduc, J.; Schmitt, A.P.; Zaleski, C.P. [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1963-07-01

    The study of the dynamic behaviour of fast reactors may be divided into three section: 1. Stability studies around equilibrium power only the linear case was examining. S. Transient studies in the case of usual reactor operation (shut down, scram, etc.) with thermal shocks evaluation, for instance. 3. Explosion studies, for the maximum credible accidents. This report presents the status of the studies performed at the 'Physics Research Department' at Cadarache. Methods used are detailed and illustrated with the results obtained on a preliminary metallic core of the Rapsodie Reactor. (authors) [French] Le comportement dynamique des piles rapides, se presente tout naturellement sous trois aspects: 1. Etude de stabilite autour d'un regime d'equilibre (nous nous sommes bornes ici au cas lineaire). 2. Etude de regimes transitoires lors des operations normales de pile (arret, arret d'urgence, etc.) avec evaluation des chocs thermiques par exemple. 3. Etude des regimes transitoires de caractere explosif lors des accidents les plus graves possibles. Ce rapport presente l'etat des etudes a la date du 20 decembre 1961 a la Section d'Etudes de Piles Rapides a CADARACHE. Les methodes employees ont ete detaillees et illustrees a partir des resultats obtenus sur une premiere version 'combustible metallique' de Rapsodie. (auteurs)

  4. Folds and Etudes

    Science.gov (United States)

    Bean, Robert

    2007-01-01

    In this article, the author talks about "Folds" and "Etudes" which are images derived from anonymous typing exercises that he found in a used copy of "Touch Typing Made Simple". "Etudes" refers to the musical tradition of studies for a solo instrument, which is a typewriter. Typing exercises are repetitive attempts to type words and phrases…

  5. The development of a very high stability electrostatic generator (1962); Etude et realisation d'un generateur electrostatique a tres haute stabilite (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Jonckheere, R.E.L. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1962-07-01

    This thesis deals with the study of an electrostatic high voltage generator having a voltage stability of the order of 10{sup -6} per minute. This equipment should be very useful in electron microscopy. The electrostatic generator is studied as a control system element: transfer function, parasitic signals and noise are determined and a mathematical model is proposed. A theoretical study of the open loop transfer function, stability, transient response, voltage stabilization of five different control systems shows which one should be able to fulfill the requirements There follows a detailed study of drift, a description of the actual system and performance data. (author) [French] Cette etude concerne un generateur electrostatique capable de fournir une tres haute tension continue dont la stabilite relative est de l'ordre de 10{sup -6} pendant une minute. Une telle performance rend cet appareillage tres utile en microscopie electronique. La generatrice electrostatique est etudiee en tant qu'element d'un systeme asservi: on determine successivement la fonction de transfert, les perturbations, le bruit de fond et le modele mathematique. L'etude de cinq differents circuits de regulation en ce qui concerne leur fonction de transfert, stabilite, reponse en regime transitoire, attenuation des perturbations, permettra de choisir le systeme qui semble le mieux repondre aux exigences. Viennent ensuite une etude detaillee de la derive, la description de la realisation pratique et les resultats de mesure. (auteur)

  6. Detailed analysis of petroleum cuts by multidimensional gas chromatography; Analyse detaillee de coupes petrolieres par chromatographie en phase gazeuse multidimensionnelle

    Energy Technology Data Exchange (ETDEWEB)

    Vendeuvre, C.

    2006-01-15

    The limitations of petroleum resources implying a better valorisation of crude oil through the optimisation of production, refinery and petrochemistry processes, as well as the environmental regulations have strengthened the necessity of more detailed characterisation of petroleum products. In order to take up this challenge, efficient analytical tools have to be developed. This work demonstrates that comprehensive two-dimensional gas chromatography (GCxGC) constitutes a major advance compared to GC owing to its improved resolution power and to the structured chromatograms indicating the polarity and the volatility of hydrocarbons. The principle of GCxGC is based on the analysis of a whole sample in two independent dimensions of separation achieved using two GC columns of different selectivities; between the two columns a modulator device samples, focuses and re-injects small portions of the effluent from the first column into the second one. Since its introduction in 1991, GCxGC has known a rapid growth and has received a wide acceptance by the analytical science community. The competitive situation has considerably evolved during this thesis with the introduction of commercial systems and the two first sessions of an international symposium dedicated to this technique (Volendam, 2003 and Atlanta, 2004). The key points of the thesis concern the development of a GCxGC prototype system using dual jets CO{sub 2} technology and a data processing program; the evaluation of a retention model allowing a rational choice of operating conditions; and the application of this technique to various and complex issues. Thus, effluents from petrochemistry, refinery or pollution areas have been analysed according to the chemical classes of hydrocarbons and to their number of carbon atoms; a new method for obtaining distillation curves for each chemical group was also presented. Furthermore, the hyphenation of GCxGC with a specific sulphur detector revealed a great interest for

  7. Detailed study of the heat sink of Saint-Laurent-des-Eaux nuclear plant; Etude detaillee de la source froide de la centrale de Saint-Laurent des Eaux

    Energy Technology Data Exchange (ETDEWEB)

    Audrerie, Y

    1997-12-31

    This work is dedicated to a detailed study of the reliability of the heat sink of the nuclear plant which is situated on the banks of the Loire river. In the first part the requirements the heat sink has to comply with are reviewed, in the second part the various operating modes, the different procedures established to cope with the hazards of the river: icing up, frost, overflow, lowest water, choking are reported. This analysis highlights the good compliance of the heat sink with the specifications but some improvements about periodic testing are proposed. (A.C.)

  8. Treatment of effluent at the Saclay Centre d'Etudes Nucleaires (1960)

    International Nuclear Information System (INIS)

    Wormser, G.

    1960-01-01

    The Centre d'Etudes Nucleaires at Saclay possesses several installations from which liquid radioactive effluent is rejected, and it has thus been found necessary to construct a station for the purification of radioactive liquids and to settle various chemical, analytical and technological problems. This report describes, in the following order: - the disposal possibilities at the Centre d'Etudes Nucleaires, Saclay, - the effluents produced at the centre, - the set-up for collecting effluent, - treatment of the effluent, - results of these treatments. (author) [fr

  9. Treatment of effluent at the Saclay Centre d'Etudes Nucleaires (1960); Le traitement des effluents du Centre d'Etudes Nucleaires de Saclay (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Wormser, G. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The Centre d'Etudes Nucleaires at Saclay possesses several installations from which liquid radioactive effluent is rejected, and it has thus been found necessary to construct a station for the purification of radioactive liquids and to settle various chemical, analytical and technological problems. This report describes, in the following order: - the disposal possibilities at the Centre d'Etudes Nucleaires, Saclay, - the effluents produced at the centre, - the set-up for collecting effluent, - treatment of the effluent, - results of these treatments. (author) [French] La presence, au Centre d'Etudes Nucleaires de Saclay, de plusieurs installations susceptibles de rejeter des effluents liquides radioactifs a necessite la construction d'une station d'epuration d'eaux radioactives et la mise au point de differents problemes chimiques, analytiques et technologiques. Dans ce rapport, nous exposerons successivement: - les possibilites de rejet du Centre d'Etudes Nucleaires de Saclay, - les effluents du centre, - le dispositif de collecte des effluents, - le traitement de ces effluents, - les resultats de ces traitements. (auteur)

  10. Experimental study of an ion cyclotron instability in a magnetic well confined plasma; Etude experimentale d'une instabilite cyclotronique ionique dans un plasma confine dans un puits magnetique

    Energy Technology Data Exchange (ETDEWEB)

    Brossier, P. [Commissariat a l' Energie Atomique, Fontenay-Aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    This report is a contribution to the study of microinstabilities in macroscopically stable plasmas, in the low-{beta} limit. Ion cyclotron instabilities, with k{sub ||} = 0, have been numerically studied in detail; the computation of the density thresholds and growth rates of the different harmonics showed the relative role played by the following energy sources: density gradient, perpendicular distribution function and cold plasma component. This theoretical model has been compared with the results of a detailed study (density thresholds, wave structure, frequency spectrum, wavelengths, growth rate, amplitude of the electric field) of the instability observed in the DECA II device. This comparison gave a good agreement which shows the destabilising role played by the cold plasma component on a hot plasma with a loss cone distribution function. (author) [French] Ce rapport est une contribution a l'etude des microinstabilites dans les plasmas macroscopiquement stables, dans la limite des {beta} << 1. Les instabilites cyclotroniques ioniques, a k{sub ||} = 0, ont ete etudiees numeriquement en detail; le calcul des seuils de densite et taux de croissance des differents harmoniques a permis de preciser l'importance relative des facteurs destabilisants suivants: gradient de densite, fonction de distribution perpendiculaire, presence de plasma froid. Ce modele theorique a ete confronte avec les resultats d'une etude detaillee (seuils de densite, structure de l'onde, spectres de frequence, longueurs d'onde, taux de croissance, amplitude du champ electrique) de l'instabilite observee dans l'experience DECA II, Cette confrontation aboutit a un accord satisfaisant qui montre le role destabilisant joue par le plasma froid sur un plasma chaud presentant une distribution de cone de pertes. (auteur)

  11. Contribution to the study of french pitchblendes; Contribution a l'etude des pechblendes francaises

    Energy Technology Data Exchange (ETDEWEB)

    Geffroy, J. [Commissariat a l' Energie Atomique, Lab. de Mineralogie, Centre de Chatillon (France). Centre d' Etudes Nucleaires; Sarcia, J.A. [Commissariat a l' Energie Atomique, Div. de la Crouzille, Haute Vienne (France). Centre d' Etudes Nucleaires

    1955-07-01

    The authors first review the characteristics of uraninite-pitchblende, as deduced of present literature. They set apart from typical pitchblende a black oxide aspect, which probably corresponds to neo-formations, and a 'para-pitchblende' aspect, which they relate to deep sur-oxidation of normal pitchblende. They insist on the easy replacement of pitchblende by silica. and give indications as to changes in vein stones (fluorite, quartz, etc...). A detailed study of paragenesis and successions in french uranium districts follows (including discussion of uranium of uranium-bearing coals). The authors attempt to classify french pitchblende veins. They are chiefly epithermal and poor in satellite ores. Three types of deposits are identified: massive - pitchblende type, silica type, fluorite type. These deposits, as those of Portugal, are included in granite, Central-European peri-batholitic types where uranium associates which Ni, Co, Bi and Ag, are in France both rare and poor. Finally, the authors attempt to bring out in the european Hercynian area a particular distribution of paragenetic types. (authors) [French] Les auteurs recapitulent d'abord les caracteres et les occurences de l'uraninite - pechblende, tels qu'ils peuvent etre degages de l'actuelle bibliographie. Ils exposent ensuite les faits qui du point de vue mineralogique seulement ressortent de l'etude mineralogique et chalcographique des pechblendes francaises et de leurs satellites. Ils distinguent de la pechblende-type un facies oxyde noir; correspondant probablement a une neoformation, et un facies parapechblende, qui est rapporte a une sur oxydation hypogene de la pechblende proprement dite. Ils insistent sur le facile remaniement de la pechblende par la slice; et donnent quelques precisions sur les modifications des gangues (fluorine, quartz, etc...). Suit l'etude detaillee des parageneses et des successions dans les districts uraniferes francais: Divisions du

  12. Study of gamma radiation between 0.1 and 1.0 MeV in the earth's atmosphere; Etude du rayonnement gamma entre 0,1 et 1 Mev dans l'atmosphere terrestre

    Energy Technology Data Exchange (ETDEWEB)

    Boclet, D. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-01-01

    The present work is devoted to some of the particular problems arising in the detection and localisation of sources of gamma radiation situated outside the earth's atmosphere. These weak sources can only be detected and localized if care is taken to eliminate gamma and particle radiations coming from other sources in the earth's atmosphere and in space. In order to separate the various sources of background noise, generally much stronger than the radiation under study, use is made of a directional detector whose characteristics are determined as described in the first part of the following report. The closest diffuse source considered is that constituted by the earth's atmosphere. Its detailed study will make it possible both to eliminate its effect when sources outside the earth are to be measured, and to predict the amount of secondary gamma radiation emitted by the same process in other celestial bodies, the moon in particular. This work considered in the 2. and 3. parts of the report. (author) [French] La presente etude est consacree a certains des problemes particuliers poses par la detection et la localisation des sources de rayonnement gamma situees hors de l'atmosphere terrestre. Ces sources faibles ne peuvent etre detectees et localisees que si l'on se protege des rayonnements gamma et particulaires provenant d'autres sources situees dans l'atmosphere terrestre et dans l'espace. Pour separer ces divers composants parasites, en general beaucoup plus intenses que le rayonnement a etudier, nous emploierons un detecteur directif dont nous determinons les caracteristiques dans la premiere partie de l'expose qui suit. La source diffuse la plus proche que nous considerons comme parasite est constituee par l'atmosphere terrestre. Son etude detaillee nous permettra d'une part de nous en proteger lorsque nous voudrons etudier les sources {gamma} extra-terrestres, d'autre part de prevoir le rayonnement gamma

  13. ETUDE - European Trade Union Distance Education.

    Science.gov (United States)

    Creanor, Linda; Walker, Steve

    2000-01-01

    Describes transnational distance learning activities among European trade union educators carried out as part of the European Trade Union Distance Education (ETUDE) project, supported by the European Commission. Highlights include the context of international trade union distance education; tutor training course; tutors' experiences; and…

  14. Etude thermo-hydraulique de l'ecoulement du moderateur dans le reacteur CANDU-6

    Science.gov (United States)

    Mehdi Zadeh, Foad

    importante, se traduisant par l'accroissement de la puissance du reacteur. Ceci peut avoir des consequences majeures pour la surete nucleaire. Une modelisation CFD (Computational Fluid Dynamics) detaillee tenant compte des effets locaux s'avere donc necessaire. Le but de ce travail de recherche est de modeliser le comportement complexe de l'ecoulement du moderateur au sein de la cuve d'un reacteur nucleaire CANDU-6, notamment a proximite des tubes de calandre. Ces simulations servent a identifier les configurations possibles de l'ecoulement dans la calandre. Cette etude consiste ainsi a formuler des bases theoriques a l'origine des instabilites macroscopiques du moderateur, c.-a-d. des mouvements asymetriques qui peuvent provoquer l'ebullition du moderateur. Le defi du projet est de determiner l'impact de ces configurations de l'ecoulement sur la reactivite du reacteur CANDU-6.

  15. Creating Pedagogical Etudes for Interactive Instruments

    OpenAIRE

    Butler, Jennifer

    2008-01-01

    In this paper I discuss the importance of and need forpedagogical materials to support the development of newinterfaces and new instruments for electronic music. I describemy method for creating a graduated series of pedagogicaletudes composed using Max/MSP. The etudes will helpperformers and instrument designers learn the most commonlyused basic skills necessary to perform with interactiveelectronic music instruments. My intention is that the finalseries will guide a beginner from these init...

  16. Etude de la distribution des champs magnetostatiques dans une section d'essais de type CANDU chauffee par effet de joule

    Science.gov (United States)

    Hall, Darren

    Parmi tous les parametres physiques consideres lors de l'analyse de surete d'un reacteur nucleaire, le flux de chaleur critique (FCC) fait partie des plus importants. Afin d'etudier le FCC sous des conditions experimentales relativement securitaires, la chaleur degagee par le combustible nucleaire peut etre reproduite grâce a l'effetet de Joule. Or, afin de generer la puissance thermique necessaire pour les experiences sur le FCC des reacteurs CANDU, des courants electriques tres eleves de l'ordre de plusieurs dizaines de milliers d'amperes sont requis ce qui genere un champ magnetostatique tres intense capable d'interagir avec la section d'essais et l'instrumentation. Consequemment, l'industrie nucleaire est preoccupee par les effets de ce champ magnetique sur les donnees collectees et par les forces d'origine magnetique agissant sur le systeme. Dans ce contexte, le travail presente dans ce memoire de maitrise vise l'implementation d'une methodologie de calcul capable de fournir une information detaillee sur le champ magnetique engendre par ces courants. Toutefois, etant donne la complexitee du systeme, une etude magnetostatique appropriee requiert une methode numerique afin d'obtenir une distribution fiable du champ magnetique a travers differentes structures de la section d'essais. a cet effet, nous considerons dans le cadre de ce memoire le volume integral equation method (VIEM), une methode bien etablie basee sur les solutions integrales des equations de Maxwell. Plus precisement, nous employons le VIEM afin d'etudier la distribution du champ magetique a l'interieur de la section d'essais et pour determiner l'influence des prises concues pour le branchement des capteurs de pression sur la symetrie de cette distribution. Etant donne que les methodes integrales incluent les conditions aux limites et par consequent ne requierent pas l'emploi d'un critere de convergence, nous proposons une nouvelle technique de discretisation. L'emploi de cette procedure nous

  17. Etude des comportements rheologiques des melanges de farine ble ...

    African Journals Online (AJOL)

    Etude des comportements rheologiques des melanges de farine ble/sorgho sans tanins issue de trois nouvelles varietes cultivees au Senegal et mise au point de pains a base de farines composees (ble/sorgho)

  18. Instrumental performance of an etude after three methods of practice.

    Science.gov (United States)

    Vanden Ark, S

    1997-12-01

    For 80 fifth-grade students three practice conditions (mental, mental with physical simulation, and physical with singing) produced significant mean differences in instrumental performance of an etude. No significant differences were found for traditional, physical practice.

  19. SEPA (Service d'etudes, de Procedes et Analyses)

    International Nuclear Information System (INIS)

    2017-01-01

    The SEPA (Service d'etudes, de Procedes et Analyses), is an engineering department specializing in the analysis and processing of uranium ore. It comes from a long tradition of mining in France that began sixty-five years ago with the French Atomic Energy Commission (CEA) and that has been carried on by COGEMA and then Areva. SEPA brings a combination of experience and excellence to its activities thanks to its multidisciplinary staff (mineralogists, chemists, mechanical engineers, instrumentation specialists...), who come from diverse cultural backgrounds. Today, the SEPA draws on its wealth of know-how and expertise to devise and develop new methods for processing and valorizing ores everywhere in the world. Its mission is to: - Develop and conduct laboratory tests on methods for processing uranium and other valuable elements such as molybdenum, vanadium, rare earths, niobium, tantalum and thorium; - Analyze ores obtained during prospecting at locations all over the world; -Serve as an advisor in the commissioning of Areva industrial units and ore processing plants; -Perform environmental analyses during the full period of mining operations; -Conduct audits and provide advice on processes and analysis methods; -Carry out research and development in all aspects of minerals treatment (including the filing of patents). The SEPA combines experience, skills and a global approach to technologies used in ore processing. Its role is to continually improve the processes for extracting, processing and valorizing ores while protecting the environment

  20. Investigation of the glide modes of single crystals of beryllium; Etude des modes de glissement de monocristaux de beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Regnier, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-05-01

    'observation des lignes de glissement et des configurations de dislocations. L'etude du glissement prismatique a ete developpee beaucoup plus largement: l'influence de la temperature de la vitesse de deformation, de l'orientation initiale du plan de base et des plans prismatiques ont ete releves sur des echantillons d'orientation soignee, deformes en tension. On a egalement effectue quelques essais de microdeformation et observe de facon detaillee les lignes de glissement et les configurations de dislocations. Le comportement tres particulier observe n'est pas du aux impuretes, mais au glissement devie. On propose un mecanisme de blocage des dislocations permettant de l'expliquer. Comme ce mecanisme suppose que les dislocations a-bar peuvent aussi se dissocier sur les plans prismatiques [101-bar0] on examine cette possibilite et l'on propose plusieurs dissociations eventuelles dont la plus probable correspond a la transformation de phase hexagonale compacte {yields} cubique centree. En generalisant cette hypothese, on montre alors comment on peut rendre compte de la facilite relative des divers modes de glissement dans tous les metaux hexagonaux. (auteur)

  1. Detailed feasibility study of a small-hydro power plant in Zerni on the municipal drinking water supply; Etude detaillee de faisabilite pour l'installation d'une petite centrale sur l'adduction d'eau potable de Zerni - Rapport final

    Energy Technology Data Exchange (ETDEWEB)

    Reul, B. [MHyLab, Montcherand (Switzerland); Perruchoud, A. [SierreEnergie SA, Sierre (Switzerland)

    2009-02-15

    This report for the Swiss Federal Office of Energy (SFOE) takes a look at a project for the realisation of a small hydro-power plant on the municipal drinking water supply of the city of Sierre, Switzerland. The installation is to be made at the site of a new reservoir in Zerni. The report presents details on the hydrological data and the dimensioning of the installation. The hydrological installations and the turbine foreseen are described and discussed, as are the applicable water regulations. The electricity production expected is discussed, as is the economic viability of the project.

  2. PENULISAN ETUDE-ETUDE MUSIK TALEMPONG UNGGAN (Sebuah Usaha Pembelajaran Musik Tradisi Berbasis Literatur

    Directory of Open Access Journals (Sweden)

    Asri MK

    2014-12-01

    Full Text Available “Talempong unggan”, a traditional music from Minangkabau community particularly in Unggan, Sumpur Kudus, Sijunjung Regency, West Sumatera Indonesia is classified into genre of “talempong duduak” (rea. Due to its special musical concept and the playing technics, this traditional music is selected as a practising course in the Karawitan Department of Indonesian Institute of Art (ISI Padang Panjang since 1993 till now. In a system of class learning with many students, Talempong Unggan definitely needs supporting methods and learning technics suitable for the course where the students can reach their maximum skills. All the melody of “talempong unggan” that has been made as a material of practice is transcribed to the system of numeric notation and rhythm motive of “gendang” and “aguang” which is written into signs and special notation. All of qualitative data is formulated into finding methods, technics and etude of learning ensamble of Talempong Unggan the traditional music that learned in Karawitan Department of ISI Padang Panjang. Key words: Talempong Unggan, Methods, Technics, Etude

  3. Etude des interactions entre les differents acteurs des interventions ...

    African Journals Online (AJOL)

    Etude des interactions entre les differents acteurs des interventions sous directives communautaires et changements obtenus au Benin et au Togo. P.V. Malou Adom, Ch. P. Makoutode, T Gnaro, A.R. Ouro-Koura, E.M. Ouendo, G Napo-Koura, M Makoutode ...

  4. Implementing Formative Assessment in Engineering Education: The Use of the Online Assessment System Etude

    Science.gov (United States)

    Dopper, Sofia M.; Sjoer, Ellen

    2004-01-01

    This article describes the possibilities offered by the online assessment system Etude to achieve the benefits of formative assessment. In order to find out the way this works in practice, we carried out an experiment with the use of Etude for formative assessment in the course on collaborative report writing. Results show that online formative…

  5. 98 Etude Comparative du Systeme Phonematique et Tonal des ...

    African Journals Online (AJOL)

    98. Etude Comparative du Systeme Phonematique et Tonal des. Deux Parlers: Le Yoruba du Nigeria et L'itsa Parle en. Republique du Benin. Ajani Akinwumi Lateef et Ayuba G. Ajibabi http://dx.doi./org/10.4314/ujah.v18i3.5. Résume. En ce début de l'époque ou la mondialisation et la coexistence des peuples dans le ...

  6. African Journal of Science and Technology (AJST) ETUDE ...

    African Journals Online (AJOL)

    MS), Adrar. 3Laboratoire d'Energétique en Zones Arides (LEZA), Université de Bechar, Algérie. E-mail : Tboussoukaia@Gmail.coma. RÉSUMÉ: Parmi toutes les méthodes expérimentales, l'optique a toujours occupé une place de choix grâce à ...

  7. African Journal of Science and Technology (AJST) ETUDE ...

    African Journals Online (AJOL)

    RESUME: Les études granulométriques et les levés bathymétriques effectués en lagune de Fresco, ont permis de caractériser les sédiments et la morphologie du fond de cette lagune. Sur le fond, les sédiments sont constitués de vases localisées dans les bras de la lagune alors que dans la lagune de. Fresco proprement ...

  8. Organisation of biological research carried out in the United States by the A.E.C. or under her contract (1960); Organisation des recherches biologiques menees aux Etats-Unis par l'A.E.C. ou sous son egide. Compte-rendu sommaire d'une mission d'etude (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Pellerin, J. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This report is based on information gathered in the course of a trip to the United States, in November and December 1958 which consisted chiefly of visits to the main biological and medical research laboratories and discussions with the heads of these establishments. A description is given of the general organisation of the Atomic Energy Commission's Division of Biology and Medicine, and of the distribution of responsibility for radiation protection work and for biological, medical and agricultural research amongst the various Services attached to it; this is followed by a more detailed account of the activities carried on in this field at the great national laboratories. Finally, the systems of collaboration set up with external research organisations in the form of research contracts are examined, together with the substantial help provided by the A.E.C. for biological, medical and agricultural research in general, owing to a systematic policy of subsidising the distribution of radioisotopes for this purpose. (author) [French] Le present rapport a ete etabli sur la base des renseignements recueillis au cours d'un voyage d'etude aux Etats-Unis, en novembre et decembre 1958, comportant notamment la visite des principaux laboratoires de recherche biologique et medicale et des entretiens avec les principaux responsables de ces laboratoires. Apres une description de l'organisation generale de la 'Division of Biology and Medicine' de l'Atomic Energy Commission et de la repartition entre les divers Services qui lui sont rattaches des responsabilites concernant la protection contre les radiations et la Recherche biologique, medicale et agronomique, des indications plus detaillees sont donnees au sujet des activites poursuivies dans ce domaine au sein des grands laboratoires nationaux. Sont examinees enfin, l'importance et les modalites de la collaboration instituee avec les Organismes de Recherche exterieurs sous la forme de

  9. Studies of light water lattices by the homogeneous boron poisoning technique; Etude des reseaux a eau legere par la methode d'empoisonnement homogene au bore

    Energy Technology Data Exchange (ETDEWEB)

    Bailly, J.; Calament, J.; Girard, Y.; Golinelli, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    By homogeneously poisoning a critical facility with boric acid, one can balance important reactivities. Furthermore this technique is particularly interesting, due to the fact that it allows the substitution of cross sections to kinetic parameters in lattice calculations. With this use of boric acid as a poison arise important technological problems which are described in this report, the last part of which deals with the accuracy of the measurements made in these conditions. The main features of a lattice study made according to this moderator poisoning technique concern the determination of the concentration of dissolved boron which makes the multiplying assembly just critical and the determination of the reactivity factor as a function of temperature (this study has been carried out fill above 95 deg. C). (authors) [French] L'empoisonnement homogene d'une facilite critique par l'acide borique permet, outre d'effectuer des compensations de reactivites importantes, de jouer le role d'un intermediaire de mesure particulierement interessant par le fait qu'il conduit a substituer, dans le calcul des reseaux, des sections efficaces aux parametres cinetiques. Cette utilisation de l'acide borique comme poison ne va pas sans poser d'importants problemes technologiques qui sont decrits dans la presente etude, dont la derniere partie est consacree a la precision de mesures effectuees dans, ces conditions. Les points essentiels de l'etude d'un reseau suivant cette technique d'empoisonnement du moderateur, concernant la mesure de la concentration de bore dissous qui rend l'assemblage multiplicateur juste critique, ainsi que la determination du coefficient de reactivite en fonction de la temperature (l'etude a ete poussee au-dela de 95 deg. C). (auteurs)

  10. Fast neutron breeder reactor Rapsodie - situation of physics, hydraulic, thermal and dynamics studies and studies of stability early in 1963; Pile rapide rapsodie - point des etudes neutroniques, hydrauliques, thermiques et dynamiques et des etudes de stabilite au debut de l'annee 1963

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1964-07-01

    ) [French] Au debut de 1963, il a ete necessaire de faire un choix entre les deux combustibles etudies pour Rapsodie: l'alliage UPuMo avec double gainage Nb et acier inoxydable et l'oxyde mixte UO{sub 2}-PuO{sub 2}. Ce rapport donne les resultats des etudes menees avec les deux types de combustible. On rappelle d'abord les differents modeles qui ont ete etudies et on donne une description detaillee de coeurs alliage et oxyde tels qu'ils sont envisages au debut de 1963. On rapporte ensuite les principales caracteristiques neutroniques des deux coeurs: flux et spectre des neutrons, valeur des barres de securite - compensation, economie des neutrons, puissance specifique, fraction effective des neutrons retardes, temps de vie des neutrons prompts, coefficients de reactivite. On decrit les etudes et essais hydrauliques qui ont ete faits a propos de ces deux coeurs. On discute les criteres qui ont ete a l'origine des calculs de debits. On donne les resultats des essais de pertes de charge, de soulevement des assemblages, de vibration et d'ecoulement fin entre les aiguilles. On discute les constantes utilisees pour les calculs thermiques et on donne les temperatures maximales du sodium et des combustibles alliage et oxyde, les majorations dues aux points chauds et la limitation du taux de combustion de l'aiguille oxyde ayant pour origine la pression des gaz de fission. On rapporte les hypotheses qui ont ete utilisees pour les calculs dynamiques et l'on decrit les differents incidents qui ont ete etudies. On donne les resultats des calculs, pour chaque incident et pour chaque combustible et l'on montre que l'on peut eviter la fusion du combustible ou l'ebullition du sodium, meme dans le cas des hypotheses les plus pessimistes, en agissant sur les caracteristiques de la pile (valeur de la barre de pilotage ou puissance de la pile avec un seul circuit de refroidissement). La stabilite de la pile a ete evaluee avec les hypotheses

  11. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  12. Etude comparative de deux produits de neem (huile et poudre) sur ...

    African Journals Online (AJOL)

    Etude comparative de deux produits de neem (huile et poudre) sur les stades préimaginaux du moustique Culex quinquefasciatus(Diptera : Culicidae) ... for nymphs only contact effects are showed. Neem oil formulated 1 % appears more effective than neem powder 0.3 % for mosquitoes control in aquatic environment.

  13. Etude morphologique d'un cas de femme XY avec dysgénésie ...

    African Journals Online (AJOL)

    Mots clés : Etude morphologique, femme XY, dysgénésie gonadique pure. The authors describe the morphological features of a twenty years old female, without ambiguous genitalia, presenting a 46,XY karyotype, normal female external genitalia and gonadal dysgenesis. She has an android type of morpho dysplasia and ...

  14. English Department Reforms at the Hautes Etudes Commerciales: Entering the Nineties.

    Science.gov (United States)

    Shanahan, Daniel

    1993-01-01

    Discusses the reforms made in the fall of 1990 in the English department at the Ecole Hautes Etudes Commerciales (Paris, France), which were based on the basis of a combination of literature-culture and second- and foreign-language acquisition pedagogical biases. (four references) (VWL)

  15. Contribution a l'etude des plantes alimentaires mineures dans la ...

    African Journals Online (AJOL)

    Contribution a l'etude des plantes alimentaires mineures dans la prefecture de Dankpen (Togo). AB Kebenzikato, S Akpavi, K Batawila, K Wala, M Dourma, K Kossi-Titrikou, KS Amouzou, I Butare, H Dantsey-Barry, K Akpagana ...

  16. 152 Etude de cas sur l'impact des amendements organiques vis-à ...

    African Journals Online (AJOL)

    john mukalay

    Etude de cas sur l'impact des amendements organiques vis-à-vis de la salinité en culture de bananier. Michel Mazinga KWEY1, Séverin Kalala BANZE2 et John Banza MUKALAY2*. 1Laboratoire des cultures in vitro, Département de phytotechnie, Faculté des sciences agronomiques,. Université de Lubumbashi, BP 1825, ...

  17. Etude de l'influence des modes de transformation sur les teneurs en ...

    African Journals Online (AJOL)

    Etude de l'influence des modes de transformation sur les teneurs en lycopène de quatre variétés de tomates de la région du nord du Burkina Faso. I Sawadogo, M Koala, C Dabire, LP Ouattara, VBEJT Bazie, A Hema, C Gnoula, E Pale, RHC Nebie ...

  18. Etude comparée des paramètres agromorphologiques de dix (10 ...

    African Journals Online (AJOL)

    Etude comparée des paramètres agromorphologiques de dix (10) variétés de patate douce ( Ipomoea batatas (L.) Lam cultivées au champ dans deux (2) conditions climatiques au Tchad et au Burkina Faso.

  19. Etude comparative de la flore aux abords des cours d'eau dans les ...

    African Journals Online (AJOL)

    Etude comparative de la flore aux abords des cours d'eau dans les zones hypo et hyper endémiques d'ulcère de Buruli en Côte d'Ivoire. C. Cisse Boni, E. Ehouman, D. Soro, M.W. Kone, A. Bakayoko, F. Dembele, K. Bauthire, M Dosso ...

  20. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  1. Etude aerodynamique d'un jet turbulent impactant une paroi concave

    Science.gov (United States)

    LeBlanc, Benoit

    Etant donne la demande croissante de temperatures elevees dans des chambres de combustion de systemes de propulsions en aerospatiale (turbomoteurs, moteur a reaction, etc.), l'interet dans le refroidissement par jets impactant s'est vu croitre. Le refroidissement des aubes de turbine permet une augmentation de temperature de combustion, ce qui se traduit en une augmentation de l'efficacite de combustion et donc une meilleure economie de carburant. Le transfert de chaleur dans les au bages est influence par les aspects aerodynamiques du refroidissement a jet, particulierement dans le cas d'ecoulements turbulents. Un manque de comprehension de l'aerodynamique a l'interieur de ces espaces confinees peut mener a des changements de transfert thermique qui sont inattendus, ce qui augmente le risque de fluage. Il est donc d'interet pour l'industrie aerospatiale et l'academie de poursuivre la recherche dans l'aerodynamique des jets turbulents impactant les parois courbes. Les jets impactant les surfaces courbes ont deja fait l'objet de nombreuses etudes. Par contre des conditions oscillatoires observees en laboratoire se sont averees difficiles a reproduire en numerique, puisque les structures d'ecoulements impactants des parois concaves sont fortement dependantes de la turbulence et des effets instationnaires. Une etude experimentale fut realisee a l'institut PPRIME a l'Universite de Poitiers afin d'observer le phenomene d'oscillation dans le jet. Une serie d'essais ont verifie les conditions d'ecoulement laminaires et turbulentes, toutefois le cout des essais experimentaux a seulement permis d'avoir un apercu du phenomene global. Une deuxieme serie d'essais fut realisee numeriquement a l'Universite de Moncton avec l'outil OpenFOAM pour des conditions d'ecoulement laminaire et bidimensionnel. Cette etude a donc comme but de poursuivre l'enquete de l'aerodynamique oscillatoire des jets impactant des parois courbes, mais pour un regime d'ecoulement transitoire, turbulent

  2. Contribution to the study on the flow rate adjustment for gas cooled power reactors (1964); Contributiom a l'etude de reglage du debit pour les reacteurs industriels refroidis par gaz (1964)

    Energy Technology Data Exchange (ETDEWEB)

    Milliot, B. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1961-06-15

    1. This original study firstly defines the problem of the adjustment of the coolant flow rate in a reactor channel as a function of the corresponding heat transfer equations and of the local and temporal neutron flux. The necessity of such an adjustment is pointed out and the modifying parameters are studied. An adjustment study using the envelope of the possible flux curves is developed. A short study on the technology and the economical advantage of this adjustment is presented. Some measurements, made on G-1 and G-2, show the precision one can obtain from adjustment apparatus itself as well as from the complete reactor adjustment system. 2. Evolution of nuclear properties of fuel in an heterogeneous thermal reactor. In the first port of this paper, the phenomena of fuel evolution have been mainly pointed out. Now a bibliographical study more qualitatively than quantitatively has been done. This survey specifies the present theories and relates to a real effective cross section and also yields to the bases of such a nuclear calculation. (author) [French] 1. Cette etude originale definit d'abord le probleme du reglage du debit de refrigerant dans un canal de reacteur en fonction de la formulation du calcul des performances thermodynamiques de ce canal et des variations du flux neutronique dans l'espace et le temps. La necessite du reglage est ensuite mise en evidence et les parametres le modifiant sont etudies. Une methode de reglage, basee sur l'emploi d 'une courbe enveloppe des courbes de flux possibles, est donnee. Une breve etude de la technologie et des incidences economiques du reglage est presentee. Des mesures effectuees sur les reacteurs G-1 et G-2 montrent la precision que l'on peut attendre des dispositifs de reglage comme du reglage d'ensemble du reacteur lui-meme. 2. Evolution des proprietes nucleaires du combustible dans un reacteur heterogene a neutrons thermiques. Les phenomenes d'evolution du combustible

  3. COMPLIANCE OF KÖHLER OP:33 NO I-II-III ETUDE BOOKS THAT ARE USED IN HIGH SCHOOLS OF FINE ARTS WITH FLUTE CONCERTOS

    Directory of Open Access Journals (Sweden)

    Yucan EKE

    2015-09-01

    Full Text Available This research is done for attesting the compliance of the etudes in German composer Ernesto Köhler’s op:33 no I-II-III books that are used in high schools of fine arts, with ability to play the flute concertos in high schools of fine arts 12 grade program, in terms of the knowledge – skills and musical functions they cover and also for contributing to learning by matching the etudes and works which are relevant. Etudes and the chosen concertos are analyzed and separated into templates in terms of melody, rhythm and tone for this research. Opinions are taken from the flute lesson instructors of various universities of Turkey to define the melody, technique and rhythm patterns. As a result of the analysis, Köhler op: 33, Book I, Etudes: 2,3,6,7,8,9,10,11,12; Köhler op: 33, Book II, Etudes:1,3,4,5,8,9,10,11; Köhler op: 33, Book III, Etudes: 1, 2, 4, 5, 6, 8; It is determined that the etudes given above in Köhler books are qualified enough to be preparative and instructive for the ability of playing the flute concertos. Some suggestions are given about which etude(s is instructive for which concerto and what kind of benefits could be gained, by this study. Based on the observed results, various suggestions are made about defining and studying the etudes which meet the technical, rhythmic and melodic features of the target concerto.

  4. Etude sur les tendons en materiaux composites et leur application aux ancrages postcontraints

    Science.gov (United States)

    Chennouf, Adil

    L'objectif general de la presente these est d'evaluer le comportement a l'arrachement et au fluage d'ancrages injectes constitues de tendons en materiaux composites afin d'etablir des recommandations plus appropriees et realistes pour le dimensionnement et la conception. Quatre types de tendons en materiaux composites, deux a base de fibres d'aramide et deux a base de fibres de carbone, ont ete utilises dans l'etude. Les travaux de recherche de cette these ont porte notamment sur: (I) Une caracterisation physique et mecanique des tendons en materiaux composites utilises dans l'etude. (II) Une etude en laboratoire sur les coulis de scellement. La premiere etape de cette etude a concerne le developpement d'un coulis de scellement performant adapte aux tendons en materiaux composites et a differentes situations d'injection. La seconde etape a traite des essais de caracterisations physique et mecanique du coulis de scellement developpe comparativement a trois coulis de scellement usuels d'un meme rapport E/L de 0,4. (III) Une etude sur des modeles reduits d'ancrages injectes. (IV) Une etude sur des modeles d'ancrages a grande echelle. La synthese de ces etudes a permis d'enoncer les principales conclusions suivantes: (1) Les valeurs moyennes des charges de rupture des tendons en materiaux composites ont ete de 1% a 29% superieures a celles specifiees par les manufacturiers. (2) L'etude sur les coulis de scellement a permis le developpement de coulis de ciment repondant aux criteres fixes, soient une grande stabilite, une bonne fluidite, une legere expansion et de bonnes caracteristiques mecaniques. (3) Les tendons en materiaux composites ont montre des contraintes d'adherence maximum superieures a celles des tendons en acier. (4) Le type de fibre, la configuration et le fini de surface des tendons en materiaux composites gouvernent leur resistance a l'adherence. (5) L'introduction de sable et d'autres ajouts comme les fines de silice et la poudre d'aluminium au coulis

  5. Etude écologique du Parc National de Mozogo-Gokoro (Cameroun ...

    African Journals Online (AJOL)

    Etude écologique du Parc National de Mozogo-Gokoro (Cameroun): prospections préliminaires de la flore ligneuse et du sol pour sa conservation et son aménagement. ... d'aménagement. Mots clés : Pré-inventaire, diversité compositionnelle, structure, écosystème de référence, menaces anthropiques, aire protégée ...

  6. Etude des boues résiduaires de la station de traitement des eaux de ...

    African Journals Online (AJOL)

    Etude des boues résiduaires de la station de traitement des eaux de Ziga et examen de leur possible valorisation pour la confection de barrières étanches. ... pour caractériser la cohérence et la capacité de faire couler la matière dans les procédés industriels et sur les mesures de filtration de la perméabilité du gâteau

  7. Etude de conception d'un simulateur de commande numérique en ...

    African Journals Online (AJOL)

    or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access. Etude de conception d'un simulateur de commande numérique en tournage. K. A. Kasségné, AS Ajavon, C Carton, A Pouyo. Abstract. (J. de la Recherche Scientifique de l'Université de Lomé, 2000, 4(2): 169-180) ...

  8. Singing as a Therapeutic Agent, inThe Etude, 1891-1949.

    Science.gov (United States)

    Hunter

    1999-01-01

    The Etude music magazine, founded by Theodore Presser, was one of a number of popular music magazines published in the years prior to the establishment of the music therapy profession in 1950. During its publication run from 1883 to 1957, over 100 music therapy related articles appeared, including 13 on the health benefits of singing published between 1891 and 1949. Written by authors with diverse backgrounds, such as the famous Battle Creek, Michigan physician John Harvey Kellogg and Boston music critic Louis C. Elson, the articles contained consistent and adamant support regarding the health benefits of singing. The advantages described were both physical and psychological, and were recommended prophylactically for well persons and therapeutically for ill persons. Although the articles varied in perspective, from philosophical to theoretical to pedagogical, there is a consistent holistic medicine theme that appeared almost ahead of its time and no doubt linked to the push for vocal music education in that era. The importance of The Etude in promulgating ideas that helped shape the early practice of music therapy should not be underestimated. For much of its publication run The Etude was the largest music periodical in print, reaching its peak circulation of 250,000 copies per month in 1924.

  9. Theoretical and Experimental Methods in Hypersonic Flows (Les Methodes Theoriques et Experimentales pour l’Etude Des Ecoulements Hypersoniques)

    Science.gov (United States)

    1993-04-01

    eropaceReserchIngenieros Aeronauticos InRC.ut Bldg M-osac 10eac Departamento de Mecanica de Fluidos MntrealdgRoad Plaza del Cardenal Cisneros 3 Ottawa K I A 1)R6...PROCEEDINGS 514 OELECTE f Theoretical and A U Experimental Methods in A Hypersonic Flows (Les Methodes Th6oriques et Experimentales pour 1’Etude des ...CONFERENCE PROCEEDINGS 514 Theoretical and - Experimental Methods in Hypersonic Flows .... t ,Z (Les Mthodes Th~oriques et Exp6rimentales pour I’Etude des

  10. Technological demonstrators. Researches and studies on the storage and disposal of long living intermediate level and high level radioactive wastes; Les demonstrateurs technologiques. Recherches et etudes sur le stockage et l'entreposage des dechets de haute activite et de moyenne activite a vie longue

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This brochure presents the technological demonstrators made by the French national agency of radioactive wastes (ANDRA) and exhibited at Limay (Yvelines, France). These demonstrators, built at scale 1, have been an essential support to the establishment of the 'Dossier 2005' which demonstrates the feasibility of a reversible disposal of long living-intermediate level and high level radioactive wastes in the Callovo-Oxfordian argillite of Meuse-Haute Marne. Two type of demonstrators were built: demonstrators of storage containers for long living-intermediate level wastes and for spent fuels, and dynamic demonstrators for containers handling. This brochure presents these different demonstrators, their characteristics and the results of their tests. (J.S.)

  11. Report of study group 3.1 ''technological and economical developments for cost reduction of LNG facilities''; Rapport du groupe d'etude 3.1 ''developpements economiques et technologiques pour la reduction des couts dans les installations de GNL''

    Energy Technology Data Exchange (ETDEWEB)

    Rapallini, R.

    2000-07-01

    The design, engineering and operation of LNG base load liquefaction and re-gasification facilities is now considered a mature technology. However, process efficiency at these plants is limited by fundamental thermodynamic principles and no radical technology breakthroughs are expected in the near future. Three important aspects affecting the cost of production are the molecular weight of the gas, the amount of nitrogen in the feed and the acid gas composition. Variations in composition will also affect the design of the facilities and production rate. Previous projects have optimised economies of scale, using processes based on large industrial gas turbines, to achieve the minimum unit cost for LNG production. LNG producers have continued to focus on larger train designs to further capitalize on economies of scale as well as continued expansion of existing facilities. The latest plant designs expect the optimum integration with existing facilities to be a major factor in optimising specific capital costs. Whilst design codes and standards have not been discussed in many papers on LNG cost reduction, it is generally accepted that project specifications can significantly impact the project cost. The cost of equipment can be significantly inflated by onerous specifications with non standard requirements that vendors have trouble meeting. The possibility of developing gas projects will mainly be determined by the requirements of power generation and/or the industrial sector. As far as power generation is concerned, expansion will rely greatly on combined cycle plants. The competitiveness of LNG as regards power generation can be further improved by adopting integrated solutions. As in all other industrial projects, one of the first concerns for the investor when he envisages building an LNG liquefaction or re-gasification terminal is the selection of the site where the terminal will be located. (author)

  12. Development of a diffuse element matrix in 'planar' technology. A particular application: logical gate with coupled emitter; Etude et realisation d'une matrice d'elements diffuses selon la technologie 'planar'. Application particuliere: porte logique a emetteurs couples

    Energy Technology Data Exchange (ETDEWEB)

    Rousseau, P. [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1967-06-01

    In a first part, after a brief recall concerning 'planar' technology we discuss the various parasitic elements associated with integrated circuits components. Mathematical formulae of these elements are derived. In a second part, we present a matrix of 22 transistors and 12 resistors which has been realized. This matrix enables the integration of the major part of nuclear circuits. Some of the obtained circuits are shown, particularly an emitter coupled logic gate which presents good electrical behaviour. (author) [French] Dans uns premiere partie, apres un bref rappel de la technologie 'planar' nous etudions les divers elements parasites associes a tout composant d'un circuit integre. Un developpement sommaire des expressions mathematiques de ces elements est propose. Dans une seconde partie nous presentons la matrice de 22 transistors et 12 resistances que nous avons realisee. Cette matrice repond aux principaux besoins de l'electronique nucleaire. Nous proposons ensuite quelques exemples de circuits realises a partir de cette matrice dont notamment une porte logique a emetteurs couples de performances tres interessantes. (auteur)

  13. Report of study group 10.3 ''gas market development in developing countries: technology transfer and financing''; Rapport du groupe d'etudes 10.3 ''l'evolution du marche gazier dans les pays en voie de developpement. Transfert des tehnologies et financement''

    Energy Technology Data Exchange (ETDEWEB)

    Okimi, H.

    2000-07-01

    The study of SG10.3 in this triennium focuses on the gas downstream in developing countries. Discussions on gas developments have flourished in the international gas community often with more emphasis on production and transmission. This may be because that gas distribution is an every day activity for gas enterprises in many member countries and is thought not new. When we look at developments in developing countries, however, the gas downstream development is more important than we normally think. Upstream gas cannot be developed without confidence in gas market; then this affects the whole gas development which may not be achieved without a guaranteed market. A gas market is not simply there but has to be developed. When a gas field is found, people may simply think that there is a market for the gas somewhere. But gas is not a commodity in the countries where there is no distribution networks. Market development is an infrastructure development there, and it often requires complicated processes including financing, technology transfer, implementation of gas networks, marketing, and operation and maintenance. (author)

  14. Etude de la diversité, de l'endémisme et de la distribution spatiale ...

    African Journals Online (AJOL)

    Etude de la diversité, de l'endémisme et de la distribution spatiale des Rubiaceae de Côte d'Ivoire. Fatou Nanou Tuo, Kouao Jean Koffi, Akossoua Faustine Kouassi, Moussa Kone, Bakayoko Adama, Jan Bogaert ...

  15. Etude de la qualité organoleptique de trois variétés de mangues ...

    African Journals Online (AJOL)

    Etude de la qualité organoleptique de trois variétés de mangues Amélie , Lippens , Brooks séchées au cours du stockage par technique de brunissement enzymatique des peroxydases (POD) et des polyphénoloxydases (PPO)

  16. Etude de l'impact de la variation de la température sur les activités ...

    African Journals Online (AJOL)

    Etude de l'impact de la variation de la température sur les activités microbiennes : application à une population de Listeria monocytogenes CIP 7831, Listeria monocytogenes Scott A CIP 103575 et Escherichia coli ATCC 25922.

  17. Contribution to the study of thermal mixing between nuclear spin systems; Contribution a l'etude du melange thermique entre systemes de spins nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Goldmann, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-02-15

    This work describes methods of dynamic nuclear polarization in solids based on the thermal mixing between nuclear spin systems. The description of the thermal mixing processes involves most of the fundamental aspects of the spin temperature theory. The experiments, conducted with paradichlorobenzene and para-dibromobenzene, yield a detailed confirmation of the theoretical predictions. (author) [French] Ce travail decrit des methodes de polarisation dynamique nucleaire dans les solides basees sur le melange thermique entre systemes de spins nucleaires. La description des processus de melange thermique met en jeu la plupart des aspects fondamentaux de la theorie de la temperature de spin. Les experiences, realisees avec du paradichlorobenzene et du paradibromobenzene, apportent une confirmation detaillee des previsions theoriques. (auteur)

  18. Etude energetique et modelisation d'un Systeme Hybride Eolien-Diesel avec stockage d'Air Comprime (SHEDAC)

    Science.gov (United States)

    Martinez, Nicolas

    Actuellement le Canada et plus specialement le Quebec, comptent une multitude de sites isoles dont !'electrification est assuree essentiellement par des generatrices diesel a cause, principalement, de l'eloignement du reseau central de disuibution electrique. Bien que consideree comme une source fiable et continue, 1 'utilisation des generatrices diesel devient de plus en plus problematique d'un point de vue energetique, economique et environnemental. Dans le but d'y resoudre et de proposer une methode d'approvisionnement plus performante, mains onereuse et plus respectueuse de l'environnement, l'usage des energies renouvelables est devenu indispensable. Differents travaux ont alors demontre que le couplage de ces energies avec des generauices diesel, formant des systemes hybrides, semble etre une des meilleures solutions. Parmi elles, le systeme hybride eolien-diesel avec stockage par air comprime (SHEDAC) se presente comme une configuration optimale pour 1 'electrification des sites isoles. En effet, differentes etudes ont permis de mettre en avant l'efficacite du stockage par air comprime, par rapport a d'autres technologies de stockage, en complement d'un systeme hybride eolien-diesel. Plus precisement, ce systeme se compose de sous-systemes qui sont: des eoliennes, des generatrices diesel et une chaine de compression et de stockage d'air comprime qui est ensuite utilisee pour suralimenter les generatrices. Ce processus permet ainsi de reduire Ia consommation en carburant tout en agrandissant la part d'energie renouvelable dans Ia production electrique. A ce jour, divers travaux de recherche ont pennis de demontrer I' efficacite d 'un tel systeme et de presenter une variete de configurations possibles. A travers ce memoire, un logiciel de dimensionnement energetique y est elabore dans le but d'unifom1iser !'approche energetique de cette technologie. Cet outil se veut etre une innovation dans le domaine puisqu'il est actuellement impossible de dimensionner un

  19. Bio-metric study of pig karyotype; Etude biometrique du caryotype du porc

    Energy Technology Data Exchange (ETDEWEB)

    Haag, J.; Lacourly, N.; Nizza, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    This study has a twofold purpose, the former is to determine the swine karyotype as accurately as possible, the latter is to try and develop a method of automatic classification and to show its possibilities and limits. (authors) [French] Cette etude a un double objet: d'une part, de definir de la facon aussi precise que possible le caryotype du porc et d'autre part, de tenter une methode de classification automatique et d'en montrer les possibilites ainsi que les limites. (auteurs)

  20. The formation of scientists and technicians at the 'Centre d'Etudes Nucleaires' at Saclay

    International Nuclear Information System (INIS)

    Debiesse, J.

    1958-01-01

    The considerable needs in research workers and scientists which are asked by the nuclear energy obliged the Commissariat a l'Energie atomique to deal with a particular effort to increase the quantitative and qualitative formation of scientists. Most various ways have been used. 1- A National Institute of Nuclear Sciences and Nuclear Techniques was created, by a joint decree of the Prime Minister and the Minister for National Education (june 18, 1957). This Institute of Higher Teaching (250 students) indulges in the following matters: atomic engineering, quantum mechanics, theory and technic of particle accelerators, special metallurgy, radiobiology, thermic and mechanics of fluids. 2- An associated centre of the 'Conservatoire National des Arts et Metiers' was created (200 students) for technical assistants, drawers, etc. 3- In contribution with both electronic industry and Ministry of Work, the Centre d'Etudes Nucleaires contributes to an accelerated formation of technical assistants into Professional Centres. Conclusion: Training of scientists and research workers is one of the most important activities of the Centre d'Etudes Nucleaires de Saclay. Without losing its technical efficiency, it has supplied and varied means adapted to the various purposes that we shall reach. (author) [fr

  1. Rocket Motor Plume Technology (L’Etude des Jets des Moteures-Fusees)

    Science.gov (United States)

    1993-06-01

    conditions sibilit6 peut 6tre difinie en terme de proba- climatiques . 11 est recommand6 d’effectuer bilit6 de d6tection par un oeil humain. Les un contr~le... changement pouvant sur- 1’atmosph~re. Ces grandeurs sont accessibles venir pendant la dur6e de l’essai. par la mod6lisation du panache et de la dif- fusion

  2. Littoral Infrared Ship Self Defence Technology Studies (Autodefense cotiere infrarouge des navires etudes technologiques)

    Science.gov (United States)

    2014-05-01

    le SET-088 a organisé un total de cinq ateliers scientifiques, où des experts en la matière de tous les pays membres (aussi bien de l’OTAN que des...doivent comporter la dénomination « STO », « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des informations analogues, telles que le titre...Bakanlığı (MSB) Defense Technical Information Center PORTUGAL ARGE ve Teknoloji Dairesi 8725 John J. Kingman Road Estado Maior da Força Aérea

  3. 107 Etude des facteurs de variation des prix d'intérêt des matières ...

    African Journals Online (AJOL)

    DELL

    Imen BELHADJ SLIMEN et Taha NAJAR. Etude des facteurs de variation des prix d'intérêt des matières premières de substitution utilisées dans les aliments concentrés des animaux d'élevage. Imen BELHADJ SLIMEN1,2* et Taha NAJAR1,2. 1Institut National Agronomique de Tunisie, Département Ressources Animales, ...

  4. Etude de la qualité organoleptique de trois variétés de mangues ...

    African Journals Online (AJOL)

    Etude de la qualité organoleptique de trois variétés de mangues Amélie , Lippens , Brooks séchées au cours du stockage par technique de brunissement enzymatique des peroxydases (POD) et des ... Les activités les plus élevées en polyphénoloxydase et en peroxydase étaient respectivement de 19.75×10-3 ± 0.01 et 52.

  5. Etude cinétique de la dégradation de l'Endosufane en solution ...

    African Journals Online (AJOL)

    Etude cinétique de la dégradation de l'Endosufane en solution. S Traore, K Mamadou, A Dembele, V Yao, Y Bekro, P Mazellier, B Legube, P Houenou. Abstract. Les pesticides sont fréquemment utilisés en Côte d'Ivoire. Leur détection dans les eaux de forage témoigne de leur mauvais usage et d'un grave problème ...

  6. Etude in vitro de l'activité antibactérienne et antifongique de l'extrait ...

    African Journals Online (AJOL)

    user

    UNR –Journal Etudes Rwandaises– Series C:Life Science & Natural Sciences– August 2009. 12. Tableau 4 : Test de l'activité de l'extrait et fractions à différents degrés de pH. Extrait hydroéthanolique. F2. F3. Souches microbiennes. A B C D E. A B C D E A B C D E. pH : 5. - - - - -. - - - - - - - - - -. pH : 7. - - - - - - - - - - - - - - -.

  7. Study 4: the renewable energies; Etude 4: les energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Roc, G. [Total Fina, 92 - Paris La Defense (France)

    2000-07-01

    In 1986 the Brundtlandt Commission formalized the durable development concept and defined in these terms: satisfy the today needs without mortgage the future generation capacity to satisfy their own needs. This concept leads to give an interest in the development of new energies sources and in the abatement of the environmental pollution. For each following energies sources, the author takes stock of the state of the art, the technological and political stakes at an international scale: the bio-fuels, the wood energy, the photovoltaic, the solar energy and the geothermal energy. (A.L.B.)

  8. Conception d'un outil d'aide a la decision de technologies de fabrication additive en milieu aeronautique

    Science.gov (United States)

    Buvat, Gael

    La fabrication additive offre une opportunite d'amelioration des methodes de productions de pieces. Cependant, les technologies de fabrication additive sont diverses, les fournisseurs de services sont multiples et peu de personnel est forme pour operer sur ces technologies. L'objectif de cette etude est d'emettre une suggestion de concepts d'outils d'aide a la decision de technologies, de materiaux et de post-traitements de fabrication additive en milieu aeronautique. Trois sous-objectifs sont employes. Premierement, la definition des criteres de decision de technologies, de materiaux et de post-traitements de fabrication additive. Ensuite, l'elaboration d'un cahier des charges de l'outil d'aide a la decision en accord avec les besoins industriels du secteur aeronautique. Et enfin, la suggestion de trois concepts d'outils d'aide a la decision et leur evaluation par comparaison au cahier des charges etabli. Les criteres captures aupres de 11 industriels concernent des criteres de couts, de qualite, de conception et de delai d'obtention. Ensuite, nous avons elabore un cahier des charges permettant de reunir les besoins des industriels du secteur aeronautique selon trois axes qui constituent la colonne vertebrale des outils d'aide a la decision : une suggestion d'interface utilisateur, une suggestion de bases de donnees et un moteur de selection des technologies, des materiaux et des post-traitements de fabrication additive. La convivialite de l'interface utilisateur, l'evaluation de la qualite souhaitee par l'utilisateur et la prise en compte des etudes de cas realisees par le moteur de selection sont exemples de besoins que nous avons identifie au sein de cette etude. Nous avons ensuite transcrit ces besoins en specifications techniques pour permettre une evaluation du niveau de satisfaction des industriels au travers d'un pointage des trois concepts suggeres. Ces trois concepts d'outils d'aide a la decision ont ete realises respectivement grâce a Microsoft Excel

  9. Etude des propriétés magnéto-optiques des couches minces à base ...

    African Journals Online (AJOL)

    Etude des propriétés magnéto-optiques des couches minces à base de ferrite de cobalt obtenues par voie sol-gel. ... Les courbes obtenues à la longueur d'onde de 820 nm présentent des cycles d'hystérésis avec des rotations rémanentes de 40, 60 et 81°/cm. Ces résultats présentent une excellente rotation Faraday de ...

  10. Etude vibroacoustique d'un systeme coque-plancher-cavite avec application a un fuselage simplifie

    Science.gov (United States)

    Missaoui, Jemai

    L'objectif de ce travail est de developper des modeles semi-analytiques pour etudier le comportement structural, acoustique et vibro-acoustique d'un systeme coque-plancher-cavite. La connection entre la coque et le plancher est assuree en utilisant le concept de rigidite artificielle. Ce concept de modelisation flexible facilite le choix des fonctions de decomposition du mouvement de chaque sous-structure. Les resultats issus de cette etude vont permettre la comprehension des phenomenes physiques de base rencontres dans une structure d'avion. Une approche integro-modale est developpee pour calculer les caracteristiques modales acoustiques. Elle utilise une discretisation de la cavite irreguliere en sous-cavites acoustiques dont les bases de developpement sont connues a priori. Cette approche, a caractere physique, presente l'avantage d'etre efficace et precise. La validite de celle-ci a ete demontree en utilisant des resultats disponibles dans la litterature. Un modele vibro-acoustique est developpe dans un but d'analyser et de comprendre les effets structuraux et acoustiques du plancher dans la configuration. La validite des resultats, en termes de resonance et de fonction de transfert, est verifiee a l'aide des mesures experimentales realisees au laboratoire.

  11. Preparation and study of dialkyl nitroxide radicals; Preparation et etude de radicaux nitroxydes diacyles

    Energy Technology Data Exchange (ETDEWEB)

    Chenavas, P. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    These radicals are obtained by oxidation of N-hydroxy-imides with lead tetracetate or p-nitro-perbenzoic acid. These imides are prepared by heating dicarboxylic acids anhydrides with benzyloxy-amine followed by catalytic hydrogenation of N-benzyloxy-imides so obtained. Two series of radicals have mainly been studied, the first concerning five-membered cyclic imides, the second six-membered cyclic imides, these molecules having methyls substituents or no on the carbon ring. N. M. R. spectra of some O-benzyl-imides have been analysed. These different results have made it possible to study the conformation and stereochemistry of these imides. (author) [French] Ces radicaux sont obtenus par oxydation d'imides N-hydroxyles par le tetracetate de plomb ou l'acide p-nitroperbenzoique; ces imides sont prepares par chauffage d'anhydrides de diacides en presence de benzyloxyamine suivie d'une hydrogenation catalytique des N-benzyloxyimides ainsi obtenus. Deux series de radicaux ont principalement ete etudies: la premiere relative a des imides cycliques a cinq chainons, la seconde a des imides cycliques a six chainons, ces molecules ayant des substituants methyles ou non sur la chaine carbonee. Les derives O-benzyles de quelques-uns de ces imides ont ete analyses en R. M. N. Ces differents resultats ont permis une etude de la conformation et de la stereochimie de ces imides. (auteur)

  12. Etude des etats electroniques en champ magnetique dans le niveau de Landau N=0 de la tricouche ABC de graphene

    Science.gov (United States)

    Rondeau, Maxime

    Dans cet ouvrage nous etudions les phases du gaz d'electrons bidimensionnel dans la tricouche de graphene en empilement ABC. En partant du modele des liaisons fortes et en faisant l'approximation du continuum autour des vallees K +, K-, nous obtenons un modele effectif a deux bandes qui permet de decrire la physique de basse energie des electrons en champ magnetique dans cette structure. Ce modele contient trois orbitales degenerees dans le niveau de Landau N = O. Ce dernier est donc 12N φ, fois degeneres en incluant les degres de liberte de spin et de vallee. En ajoutant l'interaction de Coulomb au systeme et en considerant seulement les remplissages v = -5, -4, -4, 5 afin d'avoir un systeme a trois niveaux, nous etudions le diagramme de phase du gaz d'electrons en fonction d'un biais electrique entre les couches externes. Nous trouvons une phase d'onde de densite de charge bidimensionnelle (ODC2D) comme etat fondamental du systeme. Cette ODC2D se nomme cristal dans ce memoire et nous derivons ses proprietes de transports et ses modes collectifs. Nous discutons egalement du caractere topologique de ce cristal. Notre etude englobe aussi les phases liquides avec ou sans coherence orbitale. Nous concluons notre memoire par l'etude de quelques signatures experimentales des phases du gaz d'electrons dans la tricouche.

  13. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    Science.gov (United States)

    Bendaoud, Adlane Larbi

    Les evaporateurs de refrigeration sont surtout du type tube a ailettes, appeles serpentins, et fonctionnent dans l'une des conditions suivantes: seche, humide ou avec formation de givre. Il a ete demontre que la formation du givre sur la paroi exterieure de l'echangeur engendre une surconsommation energetique a cause des operations de degivrage puisque 15 a 20% seulement de la chaleur produite sert au degivrage tandis que le reste est dissipee dans l'environnement [1]. Avec l'avenement des nouveaux refrigerants, moins nocifs envers l'environnement, l'industrie du froid se trouve penalisee du fait que peu ou pas de composantes mecaniques (compresseur, pompe, echangeur...etc.) adaptees sont disponibles [3]. Il s'agit pour la communaute des frigoristes de combler ce retard technologique en redeveloppant ces composantes mecaniques afin qu'elles soient adaptees aux nouveaux refrigerants. Dans cette optique, et afin de mieux comprendre le comportement thermique des evaporateurs au CO2 fonctionnant dans des conditions seches, qu'un groupe de chercheurs du CanmetENERGIE avaient lance, en 2000, un programme de R & D. Dans le cadre de programme un outil de simulation des evaporateurs au CO2 a ete developpe et un banc d'essai contenant une boucle secondaire de refrigeration utilisant le CO2 comme refrigerant a ete construit. Comme continuite de ce travail de recherche, en 2006 ce meme groupe de recherche a lance un nouveau projet qui consiste a faire une etude theorique et experimentale des evaporateurs au CO2 operants dans des conditions de givrage. Et, c'est exactement dans le cadre de ce projet que se positionne ce travail de these. Ce travail de recherche a ete entrepris pour mieux comprendre le comportement thermique et hydrodynamique des serpentins fonctionnant dans des conditions de givrage, l'effet des circuits de refrigerant ainsi que celui des parametres geometriques et d'operation. Pour cela, un travail theorique supporte par une etude experimentale a ete effectue

  14. The study of neutron transport by oscillation method; Etude du transport des neutrons par la methode de modulation

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V

    1959-07-01

    The oscillation method is of very general use for studying the behavior of thermal neutrons in media. The main experiments are described and a general theory of them is given. This theory, which is presented in the first part, is established using the two-group approximation which has proved its efficiency in the case of thermal neutron piles. The validity of the two-group approximation is recalled. This allows definition of the meaning of the parameters used in the theory and which are measured in these experiments. The experiments carried out by this method are described, especially those performed at the Centre d'Etudes Nucleaires de Saclay where the method has been extensively used. These experiments are interpreted by means of the general theory given previously. In this way, the identity of parameters measured by this method and those given by the theory is proved. This is particularly conclusive is the case of the mean life of neutrons in a pile. (author) [French] La methode de modulation est un procede tres general d'etude des proprietes neutroniques des milieux contenant des neutrons thermiques. Le present rapport a pour but de decrire les principales de ces experiences et d'en donner une theorie generale. Cette theorie, exposee dans la premiere partie, est etablie dons le cadre de l'approximation a deux groupes de vitesse qui a prouve son efficacite dons le cas des piles a neutrons thermiques. Le domaine de validite de l'approximation a deux groupes est rappele au debut, ce qui permet de definir avec precision la signification des parametres qui entrent dons la theorie et qui font l'objet de ces mesures. La deuxieme partie decrit les experiences realisees, en particulier celles effectuees au Centre d'Etudes Nucleaires de Saclay ou la methode a ete considerablement developpee. Ces experiences sont interpretees dans le cadre de la theorie generale exposee precedemment. On prouve ainsi l'identite des parametres mesures

  15. Randomized control trial for the assessment of the anti-albuminuric effects of topiroxostat in hyperuricemic patients with diabetic nephropathy (the ETUDE study).

    Science.gov (United States)

    Kato, Sawako; Ando, Masahiko; Mizukoshi, Toshihiro; Nagata, Takanobu; Katsuno, Takayuki; Kosugi, Tomoki; Tsuboi, Naotake; Maruyama, Shoichi

    2016-05-01

    Proteinuria is an established risk factor for diabetic nephropathy. Recent studies indicate that some xanthine oxidase inhibitors have a renoprotective effect. The aim of this study was to assess whether topiroxostat reduces albuminuria in hyperuricemic patients with diabetic nephropathy and overt proteinuria. The ETUDE study is an ongoing 24-week, multicenter, open-label, randomized (1:1), parallel group study involving hyperuricemic patients with diabetic nephropathy (estimated glomerular filtration rate [eGFR] ≥ 20 mL/min/1.73 m(2)) and overt proteinuria (0.3 ≤ urine protein to creatinine ratio (UPCR) ETUDE trial is the first randomized controlled study of topiroxostat in hyperuricemic patients with diabetic nephropathy and overt proteinuria. We will clarify the pleiotropic function of topiroxostat including an anti-albumiuric effect as well as its effects on safely decreasing serum uric acid levels.

  16. Preliminary studies leading to a conceptual design of a 1000 MWe fast neutron reactor; Etudes preliminaires conduisant a un concept de reacteur a neutrons rapides de 1000 MWe

    Energy Technology Data Exchange (ETDEWEB)

    Vendryes, G.; Zaleski, C.P. [Association Euratom-CEA Cadarache (France). Centre d' Etudes Nucleaires

    1964-07-01

    This report presents the results of studies which seemed important to undertake in connexion with the development of fast neutron reactors. - It points out the advantage of high internal breeding ratios ({approx}1, 1) which are necessary in order to get a small change in time both in power distribution and reactivity (less: than 0.005 {delta}k/k in 18 months). - It shows how to achieve this goal, when simultaneously power distribution flattening is obtained. These results in a higher mean specific power (which is an economic gain) and therefore in a smaller doubling time (about 10 years). - It attempts to find criteria concerning the specific power that should be used in future reactor designs -It presents a conceptional design of a 1000 MWe fast neutron reactor, for the realisation of which no technological impossibility appears. - It shows that the dynamic behaviour seems satisfactory despite a positive total isothermal sodium coefficient. - It tries to predict the development of fast reactors within the future total nuclear program. It does not appear that fissile materials supply problems should in France slow down the development of fast neutron reactors, which will be essentially tied up to its economical ability to produce cheap electric power. (authors) [French] Ce rapport presente les etudes qu'il nous a paru important d'aborder dans le cadre du developpement des reacteurs a neutrons rapides. - Il met en evidence l'interet des taux de regeneration internes eleves ({approx}1, 1) pour obtenir une bonne evolution dans le temps de la distribution de puissance et de la reactivite (moins de 0,005 {delta}k/k pour 18 mois). - Il montre la possibilite d'y parvenir tout en applatissant la distribution des fissions, ce qui se traduit par une puissance specifique moyenne plus elevee (gain economique), et donc un temps de doublement plus faible de l'ordte de 10 ans - Il tente de definir un optimum de la puissance specifique valable pour les

  17. Point-of-care ultrasonography adoption in Canada: using diffusion theory and the Evaluation Tool for Ultrasound skills Development and Education (ETUDE).

    Science.gov (United States)

    Woo, Michael Y; Frank, Jason R; Lee, A Curtis

    2014-09-01

    Point-of-care ultrasonography (PoCUS) first appeared in the 1980s in North America, but the extent of the diffusion of its adoption is unknown. We characterized early PoCUS adoption by emergency physicians in Canada and its barriers to use using Rogers' diffusion of innovations theory. We developed a questionnaire based on a pilot study and literature review to assess past, current, and potential use of PoCUS and potential barriers to adoption. A Dillman technique for electronic surveys was used for dissemination. Using Rogers' diffusion of innovations theory, we developed and validated the Evaluation Tool for Ultrasound skills Development and Education (ETUDE). ETUDE scores allowed categorization of respondents into innovators, early adopters, majority, and nonadopters. Descriptive statistics, correlations, and χ² statistics were used to analyze the data. The 296 respondents (36.4% of 814 surveyed) had a median age of 40 and were 72.5% male. Adoption scores using ETUDE revealed nonadopters (18.8%), majority (28.7%), early adopters (34.5%), and innovators (18.0%). Respondents endorsed "always" using PoCUS currently and in the future for focused assessment with sonography in trauma (FAST) (current 41.8%/future 88.4%), first trimester pregnancy (current 23.3%/future 73.7%), suspected abdominal aortic aneurysm (current 32.7%/future 92.6%), basic cardiac indications (current 30.7%/future 87.5%), and central venous catheterization (current 17.0%/future 80.3%). Several barriers to PoCUS were identified for part-time emergency physicians and those working in inner-city/urban/suburban settings. This is the first study to determine the state of adoption and barriers to the introduction of PoCUS in Canadian emergency medicine practice. The novel validated ETUDE instrument should be used to evaluate the uptake of PoCUS over time.

  18. Etude de la transition ferroelectrique-ferroelastique du KD2PO4 forme du front de phase en fonction du gradient thermique

    OpenAIRE

    Kvítek, Zdeněk

    2010-01-01

    Etude de la transition ferroelectrique-ferroelastique du KD2PO4 forme du front de phase en fonction du gradient thermique The thesis explores complex process of first order transition of KD2PO4 crystal from tetragonal phase to ferroelectric - ferroelastic orthorhombic phase and back at temperature 209 K. The experimental set up of nitrogeneous cryostat allowes temperature and temperature gradient variations during simultaneous three axes optical sample observations, dielectric measurements. T...

  19. A study of the aptitude of soils under natural conditions to retain radiostrontium; Etude de la vocation des sols en place a la retention du radiostrontium

    Energy Technology Data Exchange (ETDEWEB)

    Bovard, P.; Grauby, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Independently of the theoretical study of the propagation of radioactivity in the soil as a result of submersions or of radioactive rain, the authors have studied directly and practically how this radioactivity can vary in the actual soil. To this end a simple, rapid method has been perfected; it makes it possible to maintain for each soil sample the natural parameters (structure, humidity, etc.) without introducing boundary effects. In the laboratory, after charging the soil samples, part of the study of the propagation of radioactivity is done by autoradiography; finally, as a practical application, the study of an atomic site illustrates the methods described. (author) [French] Independamment de l'etude theorique de la propagation de la radioactivite dans le sol a la suite de submersions ou de pluies radioactives, les auteurs ont etudie directement et pratiquement comment pourrait evoluer cette radioactivite dans les sols en place. Pour cela, une methode simple et rapide a ete mise au point; elle permet de conserver pour chaque echantillon de sol, les parametres naturels (structure, humidite, etc...), sans introduire d'effets de paroi. En laboratoire, apres mise en charge des massifs preleves, une partie de l'etude de la propagation des radioelements est realisee par autoradiographie; enfin, une application pratique, l'etude d'un site atomique, illustre l'expose. (auteur)

  20. Study of radio-active ions in the atmosphere; Etude des ions radioactifs de l'atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Renoux, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-01-01

    A comparative study is made of active, deposits of radon and thoron in suspension in the atmosphere by means of {alpha} radiation counting, using ZELENY tubes, scattering equipment, filter papers or membranes. It has been possible to show the existence of small and large ions which are negative and positive, as well as of neutral radio-active nuclei; their properties are studied. A theoretical interpretation of the results is presented. The average content of radon (using the Ra A concentration) and of Th B in the air has been determined. The radioactive equilibrium between radon and its daughter products in atmospheric air are examined. The techniques developed for active radon and thoron deposits are applied to the study of artificial radio-activity, the analyses being carried out by means of {gamma} spectrometry. (author) [French] On effectue une etude comparative entre les depots actifs du radon et du thoron en suspension dont l'atmosphere a l'aide de comptages de rayonnement {alpha}, en utilisant des tubes de ZELENY, une batterie de diffusion, des papiers filtres ou des membranes. On met ainsi en evidence la presence de petits et gros ions negatifs et positifs, ainsi que celle de noyaux neutres radioactifs, et on etudie leurs proprietes. Une Interpretation theorique des resultats obtenus est developpee. On determine la teneur moyenne de l'air en radon (a partir de la concentration en Ra A) et en Th B. L'equilibre radioactif entre le radon et ses descendants, dans l'air atmospherique, est examine. Les Techniques mises au point pour les depots actifs du radon et du thoron sont appliquees a l'etude de la radioactivite artificielle, les depouillements s'effectuant par spectrometrie {gamma}. (auteur)

  1. Study of thermocouples for control of high temperatures; Etude de thermocouples pour le reperage des hautes temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Villamayor, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Faculte des Sciences de l' Universite de Lyon - 69 (France)

    1967-07-01

    Previous works have shown that the tungsten-rhenium alloys thermocouples were a good instrument for control of high temperatures. From its, the author has studied the W/W 26 per cent and W 5 per cent Re/W 26 per cent Re french manufactured thermocouples and intended for control of temperatures in nuclear reactors until 2300 deg. C. In 'out-pile' study he determines the general characteristics of these thermocouples: average calibration curves, thermal shocks influence, response times, and alloys allowing the cold source compensation. The evolution of these thermocouples under thermal neutron flux has been determined by 'in-pile' study. The observations have led the author to propose a new type of thermocouples settled of molybdenum-columbium alloys. (author) [French] Des travaux anterieurs ont montre que les thermocouples des alliages tungstene-rhenium etaient susceptibles de reperer avec precision des hautes temperatures. A partir de la, l'auteur a etudie las thermocouples W/W 26 pour cent Re et W 5 pour cent Re/W 26 pour cent Re de fabrication francaise et destines au controle des temperatures dans les reacteurs nucleaires, jusqu'a 2300 deg. C Dans l'etude 'hors-pile' il a determine les caracteristiques generales de ces thermocouples: courbes d'etalonnage moyen, influence des chocs thermiques, temps de reponse, et alliages assurant la compensation de soudure froide. L'etude 'en-pile' a permis de rendre compte de l'evolution de ces thermocouples sous flux neutroniques. Les phenomenes observes ont conduit l'auteur a proposer un nouveau type de thermocouples constitues d'alliages molybdene-niobium. (auteur)

  2. La structure de l'eau liquide: Une etude thermique par spectroscopie infrarouge

    Science.gov (United States)

    Larouche, Pascal

    Le probleme de la structure de l'eau liquide est important car l'eau est le liquide le plus present sur Terre, et complexe, la quete d'un modele precis pour decrire comment fonctionne ce liquide ayant debute des la fin du dix-neuvieme siecle. Cette etude aborde ce probleme en etudiant l'effet de l'augmentation de la temperature sur H2O et D 2O purs a l'aide de la spectroscopie infrarouge. L'intervalle de temperatures scrute est 29--93.1°C. Les spectres enregistres sont des spectres MIR-ATR entre 650 et 6000 cm-1 . L'analyse par facteurs de ces donnees permet de montrer que deux et seulement deux facteurs principaux sont necessaires pour decomposer tous les spectres experimentaux. Ces resultats sont confirmes grace a l'analyse par facteurs de spectres de la region FIR. Par la suite, la transformation en spectres de la partie reelle n et imaginaire k de l'indice de refraction permet de combiner les donnees des regions MIR et FIR. Une fois ce calcul termine, les spectres de transmission complets de H 2O et D2O entre 25 et 90°C sont connus. Ils sont ensuite utilises pour calculer par extrapolation le spectre des especes constituant l'eau liquide, puis leur abondance en fonction de la temperature. L'extrapolation de ces abondances montre que les especes correspondent a des temperatures limites de --18 et 122°C. Par la suite, la decomposition gaussienne des spectres d'especes met en evidence la riche structure de ces objets et permet de demontrer que l'apparent deplacement du massif d'absorption OH (OD) est produit par une variation de l'intensite des bandes et non pas de leur deplacement. L'examen attentif des spectres des especes prouve qu'il n'y a pas de OH libres crees par l'augmentation de la temperature: meme a 93.1°C, chaque molecule possede quatre liens-H. Ces conclusions sont de plus confirmees par une analyse thermodynamique du passage des molecules de la phase solide a la phase gazeuse. Pour diversifier la nature des resultats experimentaux utilises, des

  3. Detailed measurement of the flow field in an axial transonic compressor; Mesure detaillee des ecoulements dans un compresseur axial transsonique

    Energy Technology Data Exchange (ETDEWEB)

    Fradin, C.

    1998-07-01

    The prediction of flow structure and performances of an axial transonic compressor requires accurate solvers. Taking into account the complex flow patterns, it is important to validate codes by comparing it with experimental results. It is well understood that the availability of experimental data is fundamentally important for the improvement of the solvers. An axial transonic compressor has been fitted in the ERECA test facility of ONERA. The rotor of this compressor is isolated from stators. This experimental configuration allows to obtain a steady flow into the relative frame linked to the rotor. Due to this fact, experimental tests became easier because the basic phenomena are not hidden by mutual interactions rotor-stator. Measurements have been made in a test section far upstream the rotor, to provide the inlet conditions in the computation domain. Non intrusive and fast response measurement techniques allow to obtain the detailed flow structure in several test sections located in the rotor and far downstream it. All tests were carried out at four operating conditions of the compressor. Results provide good test cases for numerical prediction methods using three-dimensional Navier-Stokes solvers. (author)

  4. Study of cerenkov radiation. Production of {gamma} rays by electron accelerators; Etude du rayonnement de freinage. Production de rayons {gamma} par des accelerateurs d'electrons

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    This study is a critical comparison of the theories of Bremsstrahlung. Experimental results obtained by the production of {gamma} radiation with electron accelerators are compared to the theoretical results in order to estimate the extent to which the various theories are valid. (author) [French] Cette etude est une synthese des theories du rayonnement de freinage. Des resultats experimentaux, obtenus par la production de rayonnements {gamma} avec des accelerateurs d'electrons, sont compares aux resultats theoriques afin d'evaluer les domaines de validite des diverses theories. (auteur)

  5. Laser Technology.

    Science.gov (United States)

    Gauger, Robert

    1993-01-01

    Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

  6. Some aspects of nuclear graphite production in France; Etude generale sur les graphites nucleaires produits en France

    Energy Technology Data Exchange (ETDEWEB)

    Gueron, J.; Hering, H. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Legendre, A. [Pechiney, 75 - Paris (France)

    1958-07-01

    1) Manufacturing: A summary and results on the CEA-Pechiney purification process are given. Variations in the preparation of green pastes and their effects on graphitized material are described. 2) Physical and mechanical properties: Results are given on: - Statistics of dimensional variatior products having square cross-section. - Statistical variation of thermal expansion coefficients and of electrical conductivity. - Density of normals to carbon layer planes and their connexion with thermal expansion. - Stress-strain cycles and conclusions drawn therefrom. - Mechanical resistance and gas permeability of items for supporting fuel elements. 3) Behaviour under radiation: Alteration under radiation of French graphites irradiated either in G1 pile or in experimental piles, and thermal annealing of those alterations, are given. (author)Fren. [French] 1) Fabrication: On resume le procede d'epuration CEA-PECHINEY, ainsi que diverses modalites de preparation des pates et on expose les resultats obtenus. 2) Proprietes physiques et mecaniques: On indique le resultat d'etudes sur: - la statistique des dimensions de produits a section carree. - celle des variations des coefficients de dilatation thermique et de la conductibilite electrique. - la densite des normales aux plans graphitiques et leur connexion avec la dilatation thermique. - la compression mecanique du graphite. - la solidite mecanique et la permeabilite aux gaz de pieces destinees a supporter des cartouches de combustible. 3) Tenue sous rayonnement: Modification sous rayonnement des graphites fran is irradies soit dans la pile G1, soit dans des piles experimentales, et guerison thermique de ces modifications. (auteur)

  7. Serotonin transporter gene polymorphism and myocardial infarction: Etude Cas-Témoins de l'Infarctus du Myocarde (ECTIM).

    Science.gov (United States)

    Fumeron, Frédéric; Betoulle, Dina; Nicaud, Viviane; Evans, Alun; Kee, Frank; Ruidavets, Jean-Bernard; Arveiler, Dominique; Luc, Gérald; Cambien, François

    2002-06-25

    Depression is a risk factor for myocardial infarction (MI). Selective serotonin reuptake inhibitors reduce this risk. The site of action is the serotonin transporter (SLC6A4), which is expressed in brain and blood cells. A functional polymorphism in the promoter region of the SLC6A4 gene has been described. This polymorphism may be associated with the risk of MI. The SLC6A4 polymorphism has been investigated by polymerase chain reaction in 671 male patients with MI and in 688 controls from the Etude Cas-Témoins de l'Infarctus du Myocarde (ECTIM) multicentric study. Percentages for LL, LS, and SS genotypes were 35.5%, 45.4%, and 19.1%, respectively, for cases versus 28.1%, 49.1%, and 22.8%, respectively, for controls. S allele frequency was 41.8% and 47.4% for cases and controls, respectively. After adjustment for age and center by using multivariable logistic regression, the odds ratio for MI associated with the LL genotype was 1.40 (95% CI 1.11 to 1.76, P=0.0047). The LL genotype of the SLC6A4 polymorphism is associated with a higher risk of MI. This could be attributable to the effect of the polymorphism on serotonin-mediated platelet activation or smooth muscle cell proliferation or on other risk factors, such as depression or response to stress.

  8. Cognitive decline is associated with systemic oxidative stress: the EVA study. Etude du Vieillissement Artériel.

    Science.gov (United States)

    Berr, C; Balansard, B; Arnaud, J; Roussel, A M; Alpérovitch, A

    2000-10-01

    To determine whether systemic oxidative stress status is associated with cognitive decline. A longitudinal population-based study. A cohort study of older subjects in Nantes, France. A total of 1166 high cognitive functioning subjects aged 60 to 70 in the Etude du Vieillissement Arteriel (EVA) cohort with a 4 year follow-up. Subjects completed a baseline interview and a global cognitive test (Mini-Mental Status Examination (MMSE)). Blood samples were obtained at baseline to determine plasma levels of selenium, carotenoids, thiobarbituric acid reactant substances (TBARS), an indicator of lipoperoxidation, and red blood cell vitamin E. Risk of cognitive decline, defined as a loss of 3 points in MMSE score between baseline and the 4 year follow-up, was assessed by oxidative stress level. Subjects with the highest levels of TBARS show an increased risk of cognitive decline (adjusted odds ratio (OR) = 2.25; confidence interval (CI) 95% = 1.26-4.02). This result is reinforced in the lower antioxidant status subgroup. Subjects with low levels of selenium have an increased risk of cognitive decline (OR = 1.58; CI 95% = 1.08-2.31) after adjustment for various confounding factors. These results suggest that increased levels of oxidative stress and/or antioxidant deficiencies may pose risk factors for cognitive decline. The direct implication of oxidative stress in vascular and neurodegenerative mechanisms that lead to cognitive impairment should be further explored.

  9. Etudes sur l'histoire de la pauvreté (Moyen Age — XVIe siècle

    Directory of Open Access Journals (Sweden)

    Hilário Franco Júnior

    1977-09-01

    Full Text Available MOLLAT, Michel (dir..  Etudes sur l'histoire de la pauvreté (Moyen Age — XVIe siècle. 2 vols. Paris Publications de la Sorbonne, 1974. 855p. (primeiro parágrafo do artigo Esta obra reúne alguns dos trabalhos desenvolvidos nos seminários sobre pobres e pobreza na Idade Média, que o professor Michel Mollat coordena desde 1962 na Sorbonne. Após um rápido e excelente ensaio introdutório, assinado pelo organizador da obra, no qual se colocam alguns dos problemas relativos ao estudo da pobreza medieval, seguem-se 35 estudos, devidos a diferentes colaboradores. O primeiro volume, correspondente à primeira parte da obra ("Pobreza e caridade, valores individuais" agrupa 21 estudos, e o segundo ("Desenvolvimento da pobreza e organização da assistência". Uma bibliografia de cerca de 160 títulos, uma lista de palavras-chaves latinas de uso mais comum na documentação da Idade Média e algumas gravuras extra-texto de boa qualidade completam o livro.

  10. Contribution a l'etude et au developpement de nouvelles poudres de fonte

    Science.gov (United States)

    Boisvert, Mathieu

    " uphill " permet de conserver plus ou moins de graphite nodulaire a l'interieur des regions riches en silicium, alors que le reste du graphite precipite sous forme lamellaire/vermiculaire dans les regions interparticulaires. L'etude des poudres de fontes et la recherche des mecanismes regissant la morphologie du graphite dans les fontes coulees/moulees nous ont amenes a produire des poudres de fontes traitees au magnesium avant l'atomisation. Plusieurs resultats fondamentaux ont ete obtenus de la caracterisation des poudres traitees au magnesium et de leur comparaison avec des poudres de chimies similaires non traitees au magnesium. D'abord, il a ete possible d'observer des bifilms d'oxyde de silicium dans la structure du graphite primaire d'une poudre de fonte grise hypereutectique. Il s'agit des premieres images montrant la structure double de ces defauts, venant ainsi appuyer la theorie elaboree par le professeur John Campbell. Ensuite, il a ete montre que le traitement au magnesium forme une atmosphere protectrice gazeuse autogeneree qui empeche l'oxydation de la surface du bain liquide et donc, la formation et l'entrainement des bifilms. Le role du magnesium sur la morphologie du graphite est de diminuer le soufre en solution en formant des precipites de sulfure de magnesium et ainsi d'augmenter l'energie d'interface graphite-liquide. En reponse a cette grande energie d'interface graphite-liquide, le graphite cherche a minimiser son ratio surface/volume, ce qui favorise la formation de graphite spheroidal. De plus, deux types de germination ont ete observes dans la poudre de fonte hypereutectique traitee au magnesium. Le premier type est une germination heterogene sur un nombre limite de particules faites de magnesium, d'aluminium, de silicium et d'oxygene. Le deuxieme type est une germination homogene des nodules dans certaines regions du liquide plus riches en silicium. L'observation du centre reel tridimensionnel, en microscopie electronique en transmission en

  11. Etude des phenomenes dynamiques ultrarapides et des caracteristiques impulsionnelles d'emission terahertz du supraconducteur YBCO

    Science.gov (United States)

    Savard, Stephane

    Les premieres etudes d'antennes a base de supraconducteurs a haute temperature critique emettant une impulsion electromagnetique dont le contenu en frequence se situe dans le domaine terahertz remontent a 1996. Une antenne supraconductrice est formee d'un micro-pont d'une couche mince supraconductrice sur lequel un courant continu est applique. Un faisceau laser dans le visible est focalise sur le micro-pont et place le supraconducteur dans un etat hors-equilibre ou des paires sont brisees. Grace a la relaxation des quasiparticules en surplus et eventuellement de la reformation des paires supraconductrices, nous pouvons etudier la nature de la supraconductivite. L'analyse de la cinetique temporelle du champ electromagnetique emis par une telle antenne terahertz supraconductrice s'est averee utile pour decrire qualitativement les caracteristiques de celle-ci en fonction des parametres d'operation tels que le courant applique, la temperature et la puissance d'excitation. La comprehension de l'etat hors-equilibre est la cle pour comprendre le fonctionnement des antennes terahertz supraconductrices a haute temperature critique. Dans le but de comprendre ultimement cet etat hors-equilibre, nous avions besoin d'une methode et d'un modele pour extraire de facon plus systematique les proprietes intrinseques du materiau qui compose l'antenne terahertz a partir des caracteristiques d'emission de celle-ci. Nous avons developpe une procedure pour calibrer le spectrometre dans le domaine temporel en utilisant des antennes terahertz de GaAs bombarde aux protons H+ comme emetteur et detecteur. Une fois le montage calibre, nous y avons insere une antenne emettrice dipolaire de YBa 2Cu3O7-delta . Un modele avec des fonctions exponentielles de montee et de descente du signal est utilise pour lisser le spectre du champ electromagnetique de l'antenne de YBa 2Cu3O7-delta, ce qui nous permet d'extraire les proprietes intrinseques de ce dernier. Pour confirmer la validite du modele

  12. Contribution to the study of fluctuations in transistors (bipolar and junction field effect types); Contribution a l'etude des fluctuations dans les transistors (bipolaires et a effet champ a jonctions)

    Energy Technology Data Exchange (ETDEWEB)

    Borel, J. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1970-07-01

    A brief review of the basic theory of fluctuations in semiconductors is given: shot, thermal low frequency noise. A measuring set has been built to draw noise spectrums (current or voltage). Noise parameters of bipolar transistors are given, mainly noise voltage. Noise current, noise factor and correlation between noise sources are also calculated. Measurements of noise parameters fit well with theory for various devices made in different technologies: alloyed, mesa, planar. Then we give results of the calculation of noise parameters in a FET starting from a simplified model of the device. Low frequency noise is taken into account. Measurements of the parameters and of the spectrum agree fairly well with the theory. Studies of low frequency noise versus temperature give the density and energy of traps located in the space charge layers and an idea of the impurity encountered in these space charge layers. [French] On rappelle les notions de base de la theorie des fluctuations dans les semiconducteurs: bruit de grenaille, bruit thermique, bruit basse frequence. Un appareillage mis au point pour tracer un spectre de bruit est decrit. On presente ensuite le calcul des parametres de bruit d'un transistor bipolaire en insistant plus particulierement sur la tension de bruit ramenee a l'entree de l'element. Le courant de bruit, le facteur de bruit et la correlation entre les sources de bruit sont calcules. La mesure des parametres de bruit est faite sur divers elements realises dans diverses technologies: alliee, mesa et plane. Les mesures confirment tres bien la theorie. On presente ensuite le calcul des parametres de bruit d'un transistor a effet de champ en definissant un schema equivalent simple de l'element. Le calcul theorique des fluctuations basse frequence est aussi fait. La mesure du spectre de bruit confirme tres bien les calculs theoriques. L'etude du bruit basse frequence en fonction de la temperature permet de remonter a la

  13. Development of black scattering coatings for space application (etude de traitements noirs diffusants pour application spatiale)

    Science.gov (United States)

    Mestreau-Garreau, Agnes; Pezant, Christian; Cousin, Bernard; Etcheto, Pierre; Otrio, Georges

    2017-11-01

    In the context of Research and Technology (R&T), studies have been performed on the coatings of vane edge in the 0.4 to 1 μm spectral range. The main purposes of the study were to improve the diffusing black coatings available on the market and to look for other diffusing black coatings. At the same time, we have also improved the machining technologies of vane edges. The characterisation (thermal tests, radiometric measurements, adhesion tests) of the most promising technologies has been carried out. The results have pointed out the stainless steel vanes with the edge obtained by polishing or by advanced grinding.

  14. Taming Technology

    Science.gov (United States)

    Branscomb, Lewis M.

    1971-01-01

    Reviews aspects of technology in our society: technology as a force for social change; reasons for the frustration and dissatisfaction with technology; how technology decentralizes power; the individual's influence; resolving conflicts in the ionized" society; regulation of technology; corporate responsibility; and the potential pitfalls for the…

  15. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  16. Sport Technology

    CSIR Research Space (South Africa)

    Kirkbride, T

    2007-11-01

    Full Text Available Technology is transforming the games themselves and at times with dire consequences. Tony Kirkbride, Head: CSIR Technology Centre said there are a variety of sports technologies and there have been advances in material sciences and advances...

  17. Composes inter-halogenes sous pression: etude des transformations structurales dans le monobromure d'iode sous forme dense

    Science.gov (United States)

    Bouchard, Alexandre

    La famille des composes halogenes et inter-halogenes representent des solides moleculaires adoptant des phases denses communes avec des solides moleculaires diatomiques comme l'azote et l'hydrogene. Parmi les transformations structurales et electroniques induites sous haute pression et observees dans ces solides, on note, entre autres, la dissociation moleculaire et la metallisation. De plus, l'etude des phases denses de l'iode a permis recemment l'observation d'une structure cristalline possedant une modulation dite incommensurable, c'est-a-dire une modulation possedant une periodicite differente de celle de la structure cristalline, jetant ainsi une lumiere nouvelle sur le processus de dissociation moleculaire dans les solides halogenes. Dans ce memoire, on propose d'etudier les changements structuraux dans monobromure d'iode (IBr), un compose inter-halogene possedant des proprietes structurales semblables a celles de deux composes halogenes, soit l'iode (I 2) et le brome (Br2) sous leur forme solide. Des experiences de diffraction des rayons X de poudres en utilisant un rayonnement synchrotron ont ete realisees a temperature ambiante sur l'IBr en variant la pression jusqu'aux environs de 60 GPa. La nature chimique particuliere du compose IBr a necessite la mise au point de techniques de chargement d'echantillon destinees a preserver l'integrite chimique de la substance utilisee. On rapporte egalement l'observation d'une phase de l'IBr presentant une modulation incommensurable. Les phases observees dans l'IBr permettent d'etablir des paralleles avec les phases denses rapportees dans I2 et Br2 par le biais d'un modele phenomenologique decrivant la sequence structurale des solides halogenes sous forme condensee.

  18. Systematic study of plasma and serum proteins in the pig; Etude systematique des proteines plasmatiques et seriques du porc

    Energy Technology Data Exchange (ETDEWEB)

    Daburon, F.; Nizza, P.; Hatchikian, C.; Schmidt, J.-P. [Commissariat a l' Energie Atomique (France)

    1966-07-01

    This work has been carried out in the framework of the determination of the physiological constants of a normal pig. The aim was to study the serum and plasma proteins of this animal species, the ultimate object being to discover whether the qualitative and quantitative changes in these proteins can make a significant contribution to the establishment of a biological dosimetry for irradiated pigs. The serum and plasma from a normal pig were analyzed first by various simple electrophoretic methods and then by immuno-electrophoresis. As a result of the particular characteristics of pig serum we have gradually been led to make numerous modifications to the techniques used for human serums or for those of small laboratory animals. Much careful work and patience were required in order to obtain reproducible results. (authors) [French] Ce travail se situe dans le cadre de la determination des constantes physiologiques du porc normal. il s'agissait de proceder a l'etude des proteines seriques et plasmatiques de cette espece animale, le but ulterieur etant de savoir si les modifications qualitatives et quantitatives de ces proteines pourront representer une contribution valable a l'etablissement d'une dosimetrie biologique chez le porc irradie. Le serum et le plasma du porc normal ont ete analyses d'abord par diverses methodes electrophoretiques simples puis par immunoelectrophorese. Les caracteristiques particulieres du serum de porc nous ont conduits a apporter progressivement de nombreuses modifications aux techniques utilisees pour des serums humains ou de petits animaux de laboratoire. L'obtention de resultats reproductible a exige beaucoup de patience et de minutie. (auteurs)

  19. Rover Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and mature rover technologies supporting robotic exploration including rover design, controlling rovers over time delay and for exploring . Technology...

  20. Nano technology

    International Nuclear Information System (INIS)

    Lee, In Sik

    2002-03-01

    This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

  1. F{sup 19} relaxation in non-magnetic hexafluorides; Contribution a l'etude de la relaxation des fluors dans les hexafluorures non magnetiques

    Energy Technology Data Exchange (ETDEWEB)

    Rigny, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-12-01

    The interesting properties of the fluorine magnetic resonance in the hexafluorides of molybdenum, tungsten and uranium, are very much due to large anisotropies of the chemical shift tensors. In the solid phases these anisotropies, the values of which are deduced from line shape studies, allow one to show that the molecules undergo hindered rotations about the metal atom. The temperature and frequency dependence of the fluorine longitudinal relaxation times shows that the relaxation is due to the molecular motion. The dynamical parameters of this motion are then deduced from the complete study of the fluorine relaxation in the rotating frame. In the liquid phases, the existence of anisotropies allows an estimation of the different contributions to the relaxation. In particular, the frequency and temperature dependence of the relaxation shows it to be dominated by the spin-rotation interaction. We have shown that the strength of this interaction can be deduced from the chemical shifts, and the angle through which the molecule rotates quasi-freely can be determined. In the hexafluorides, this angle is roughly one radian at 70 C, and with the help of this value, the friction coefficients which describe the intermolecular interactions are discussed. (author) [French] Les proprietes de la resonance magnetique des fluors dans les hexafluorures de molybdene, tungstene et uranium sont influencees par l'existence de deplacements chimiques tres anisotropes. Dans les phases solides, la valeur de cette anisotropie peut etre determinee par l'analyse des formes de raies et son existence permet de montrer que les molecules sont en rotation empechee autour de leur atome central. L'etude du temps de relaxation longitudinal en fonction de la temperature et de la frequence montre que la relaxation est due aux mouvements moleculaires, aux plus hautes temperatures. Les proprietes dynamiques du mouvement sont obtenues par l'etude complete de la relaxation spin

  2. Information Technology

    Science.gov (United States)

    2003-01-01

    The first wave delivered a range of services to most areas of the world through a vast, carefully constructed global network. Cellular technology ...Information Technology and Services Alliance. Digital Planet 2002: The Global Information Economy. February 2002. Yegyazarian, Anush. Sales Taxes...Information Technology ABSTRACT: The information technology (IT) industry affects virtually every industry in the n economy. During the late 90

  3. Etude de la stabilite du processus d'usinage basee sur la theorie ...

    African Journals Online (AJOL)

    delay differential equation modeling machine tool chatter.PHD thesis. Budapest Universityof Technology and. Economics. [7]. Philip V. & Bayly. 2002. Effects of radial immersion and cutting direction on chatter instability in end- milling, American Society of Mechanical Engineers. Manufacturing Engineering Division., MED, ...

  4. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  5. Conservation of an ion beam brightness. Study of a non brightness disturbing lens; Conservation de la brillance d'un faisceau ionique. Etude d'une lentille ne deteriorant pas cette brillance

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-11-01

    Experimental studies of ion sources prove that large initial brightnesses can be obtained by using the plasma expansion principle. However these brightnesses are usually spoiled by the beam focusing and accelerating systems. A high intensity focusing set up is first theoretically studied, then numerically determined by use of a 7094 IBM computer. Aberrations have been minimized. It has then been possible to construct a set up conserving the source initial brightness. For a 100 mA beam the focusing voltage is 150 kV, the beam study has been done for 350 keV beam final energy. Given is a discussion of results. (author) [French] L'etude experimentale des sources d'ions, montre que de grandes brillances initiales peuvent etre atteintes en utilisant le principe de l'expansion du plasma. Mais generalement ces brillances sont alterees par la focalisation et l'acceleration du faisceau. Nous presentions une etude theorique, suivie d'une determination numerique utilisant l'ordinateur IBM 7094, d'un montage capable de focaliser des intensites elevees. Nous nous efforcons de reduire au minimum les aberrations. Nous avons pu realiser un systeme conservant la brillance initiale de la source. Pour une intensite de 100 mA la tension de focalisation doit etre de 150 kV. L'etude du faisceau a ete faite a 350 keV. Nous discutons enfin des resultats obtenus. (auteur)

  6. Contribution to the study of the stability of water-cooled reactors; Contribution a l'etude de la stabilite des reacteurs refroidis par de l'eau

    Energy Technology Data Exchange (ETDEWEB)

    Coudert, C. [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1969-06-01

    This work is devoted to the study of the stability of reactors cooled by water subjected only to natural convection. It is made up of two parts, a theoretical study and experimental work, each of these parts being devoted to a consideration of linear and non-linear conditions: - calculation of the transfer function of the reactor using neutronic and hydrodynamic linear equations with the determination of the instability threshold; - demonstration of the existence of the limiting oscillation cycle in the case of a linear feedback using MALKIN'S method; - measurement and interpretation of the reactor's transfer functions and of the hydrodynamic transfer functions; and - analysis of the noise due to boiling. (author) [French] Dans ce travail on etudie la stabilite des piles refroidies par de l'eau circulant en convection naturelle. Cette etude se divise en deux parties: un travail theorique et un travail experimental, chacune de ces parties comportant une etude lineaire et une etude non-lineaire: - calcul de la fonction de transfert du reacteur a partir des equations lineaires de la neutronique et de l'hydrodynamique avec determination du seuil d'instabilite; - demonstration de l'existence du cycle limite des oscillations dans le cas d'une retroaction lineaire en utilisant la methode de MALKIN; - mesure et interpretation de la fonction de transfert du reacteur et des fonctions de transfert hydrodynamiques; et - analyse du bruit d'ebullition. (auteur)

  7. The study of some thiazinic and indaminic dye syntheses induced by ionising radiation; Etude de quelques syntheses de colorants thianziniques et indaminiques amorcees par les rayonnements ionisants

    Energy Technology Data Exchange (ETDEWEB)

    Balestic, S. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-03-15

    With a view to finding some radiochemical reactions applicable on an industrial scale for evaluating the radioactive waste from nuclear reactors, a systematic study was made of the radiochemical synthesis of thiazinic dyes such as methylene blue and Lauths' violet, on which the first tests were carried out in 1954. The first part of the study concerned the identification and the dosage, during radiolysis, of dyes by means of their absorption spectra after separation from the reaction medium by adsorption chromatography or ion-exchange; other radiolysis products such as ammonium chloride and hydrogen peroxide were also identified. During a later stage by systematically varying the physico-chemical parameters it was possible to determine the most favourable conditions for radio-synthesis; the maximum radiochemical yields obtained had the following values: G (Lauths' violet) 1,65; G (Methylene blue) = 1,75. Furthermore, the study of the influence of variously substituted aminated products on the radiochemical yield showed the possibility of synthesising Bindsehedlers green and Wursters blue by radiochemical methods. Finally the discovery of a fundamental intermediate product, Wursters red, together with the kinetic study of the chemical synthesis of methylene blue made it possible to determine the main stages of the reaction mechanism and to decide which of these stages could be attributed to ionising radiations in the case of the radiochemical synthesis. (author) [French] Dans le but de trouver des reactions radiochimiques susceptibles d'une application industrielle pour valoriser les dechets radioactifs provenant des reacteurs nucleaires, il a ete entrepris une etude systematique de la synthese radiochimique des colorants thiazimiques tels que le Bleu de Methylene et le Violet de Lauth dont les premiers essais ont ete effectues par Loiseleur en 1954. La premiere partie de l'etude a porte sur l'identification et le dosage des colorants formes

  8. Magnetic study of solid uranium-fluorine complexes; Contribution a l'etude magnetique de composes fluores solides de l'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Dianoux, A.J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-06-01

    A study of the magnetic susceptibility of uranium V fluorine complexes and of the magnetic resonance of fluorine atoms in uranium VI fluorine complexes has made it possible to put forward a structural model for these compounds for which it is impossible, because of the lack of suitable single crystals for X-ray diffraction work, to deduce the exact position of the fluorine atoms. It is shown that it is difficult to interpret the paramagnetism of uranium fluorides, because the uranium ions are in low-symmetry sites. A theoretical study of the magnetism of the U{sup V} ion in complex fluorides of the type M{sub 3}UF{sub 8} (M = NH{sub 4}, Na, Rb, Cs) leads to an interpretation based on a trigonal deformation of the eight fluorine atom structure surrounding the uranium atom. By applying a Hamiltonian spin formalism and making a systematic use of group theory, it is possible to present the susceptibility calculations very concisely. Study of the resonance and of the relaxation of the fluorine atoms in powdered uranium VI complex fluorides suggests a structural model in the case of NaUF{sub 7}. It is shown that the shape of the magnetic resonance absorption lines is strongly affected by the presence of large anisotropic chemical shifts. In the model proposed here, six fluorine atoms are linked to the uranium, atom by strongly covalent bonds in a deformed UF{sub 6} octahedral structure; the seventh fluorine atom remains ionic. The occurrence of a rotational movement of the octahedron is confirmed by a study of the longitudinal relaxation of the fluorine atoms, the activation energy being 0.46 eV. (author) [French] L'etude de la susceptibilite magnetique de complexes fluores d'uranium V et la resonance magnetique des fluors dans des complexes fluores d'uranium VI permettent de proposer un modele structural pour ces composes, ou la diffraction des rayons X, en l'absence de monocristaux convenables, est incapable de preciser la position des atomes de

  9. Experimental study of the hydrodynamic instabilities occurring in boiling-water reactors; Etude experimentale des instabilites hydrodynamiques survenant dans les reacteurs nucleaires a ebullition

    Energy Technology Data Exchange (ETDEWEB)

    Fabreca, S. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-10-01

    The subjects is an experimental out-of pile loop study of the hydrodynamic oscillations occurring in boiling-water reactors. The study was carried out at atmospheric pressure and at pressure of about 8 atmospheres, in channels heated electrically by a constant and uniform specified current. In the test at 8 atmospheres the channel was a round tube of approximately 6 mm interior diameter. At 1 atmosphere a ring-section channel was used, 10 * 20 mm in diameter, with an inner heating tube and an outer tube of pyrex. It was possible to operate with natural convection and also with forced convection with test-channel by-pass. The study consists of 3 parts: 1. Preliminary determination of the laws governing pressure-drop during boiling. 2. Determination of the fronts at which oscillation appears, within a wide range of the parameters involved. 3. A descriptive study of the oscillations and measurement of the periods. The report gives the oscillation fronts with natural and forced convection for various values of the singular pressure drop at the channel inlet and for various riser lengths. The results are presented in non-dimensional form, which is available, in first approximation, for all geometric scales and for all fluids. Besides the following points were observed: - the wall (nature and thickness) can be an important factor ; - oscillation can occur in a horizontal channel. (author) [French] II a ete effectue une etude experimentale, en boucle hors-pile, des oscillations hydrodynamiques survenant dans les reacteurs a ebullition. L'etude a ete effectuee a la pression atmospherique et a une pression voisine de 8 atmospheres dans des canaux chauffes electriquement a puissance imposee constante et uniforme. Dans les essais a 8 atmospheres le canal etait un tube circulaire de diametre interieur 6 mm environ. A 1 atmosphere le canal etait de section annulaire 10 * 20 mm avec un tube interieur chauffant et un tube exterieur en pyrex. Le fonctionnement etait possible

  10. Contribution to the study of the vertical molten zone process (1963); Contribution a l'etude du procede de la zone fondue verticale (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Lenzin, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    Construction and use of several molten zone apparatuses operating either vertically or horizontally. Efficient purification of uranyl nitrate hexahydrate but less successful in the case of other hydrated double salts and of zirconyl chloride in the hydrochloric gel form. Demonstration and study of the dissymmetry in the direction of the transport of the impurity during, the purification by a vertical molten zone process. (author) [French] Construction et utilisation de plusieurs appareils de zone fondue travaillant soit en vertical, soit en horizontal. Purification efficace du nitrate d'uranyle hexahydrate mais peu significative dans le cas des autres couples de sels hydrates et du chlorure de zirconyle a l'etat de gel chlorhydrique. Mise en evidence et etude de la dissymetrie sur le sens de transport de l'impurete au cours de la purification par zone fondue verticale. (auteur)

  11. Etude et modélisation du comportement électrique des transistors MOS fortement submicroniques

    OpenAIRE

    Prégaldiny , Fabien

    2003-01-01

    Membres du jury : Pr Jean-Louis Balladore (ULP), Pr Christian C. Enz (EPFL), Pr Pierre Gentil (INPG), Pr Daniel Mathiot (ULP), Pr Christophe Lallement (ULP), Dr Jean-Michel Sallese (EPFL).; Accurate MOS transistor modeling for circuit design and simulation is a constant challenge due to the continuously evolving of CMOS technology. The objective of this thesis is on the one hand to study the main effects resulting from MOSFET miniaturization and on the other hand to propose simple and origina...

  12. Study of point defects in pure iron by means of electrical resistivity; Etude au moyen de la resistivite electrique des defauts ponctuels dans le fer pur

    Energy Technology Data Exchange (ETDEWEB)

    Minier-Cassayre, C. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-04-01

    In the first part of this work, after having reviewed the production, observation and the annealing of point defects In metals, we resume the present state of research. In the second part, we explain the techniques we have employed to produce point defects at low temperatures: irradiation, quenching and cold-work; and go on to the study of their migration and annealing. The experimental results obtained for pure iron and for iron containing certain impurities are presented in the third part. In the fourth part we suggest a model which explains the different stages of annealing observed, and their properties. We then compare the energies of interaction between point defects with the values deduced from the theory of elasticity. (author) [French] Dans la premiere partie de cette etude, apres avoir passe en revue la production, l'observation et les modes de guerison des defauts ponctuels dans les metaux, nous exposons l'etat actuel des recherches. La seconde partie est consacree aux techniques que nous avons employees pour produire des defauts ponctuels a basse temperature: irradiations, trempe et ecrouissage puis a l'etude de leur migration et de leur guerison. Les resultats experimentaux obtenus dans le fer pur et le fer contenant certaines impuretes sont presentes dans le troisieme chapitre. Nous proposons ensuite un modele qui explique les differents stades de guerison observes et leurs nombreuses proprietes: nous comparons les energies d'interaction entre defauts ponctuels aux valeurs que l'on pourrait deduire d'un modele elastique. (auteur)

  13. Etude d'un systeme de recuperation et de stockage de chaleur pour un systeme eolien-diesel avec stockage d'air comprime

    Science.gov (United States)

    Remillon, Thibaut

    La recherche presentee dans ce memoire porte sur les systemes hybrides eolien-diesel avec stockage d'air comprime (SHEDAC) adaptes a la production d'electricite en sites isoles, et plus precisement sur l'apport d'un systeme de recuperation et de stockage de chaleur (TES) au fonctionnement de ces systemes. Le principe de fonctionnement est le suivant. Quand la puissance eolienne est excedentaire par rapport aux besoins de la charge, le surplus d'energie est utilise pour comprimer de l'air. De ce processus resulte un rechauffement de l'air, on choisit d'extraire et de stocker la chaleur separement. Lors de la phase de restitution d'energie, l'air comprime utilise pour suralimenter le moteur thermique est rechauffe en utili sant la chaleur stockee precedemment. Tout au long de l'etude, nous avons seulement pris en compte la chaleur provenant du processus de compression de l'air, et neglige en tous points du systeme les echanges de chaleur avec le milieu exterieur. Pour quantifier l'apport du systeme de stockage de chaleur, nous avons tout d'abord mene une etude bibliographique sur ces systemes, pour identifier les meilleures solutions disponibles. Ensuite, on a modelise une de ces solutions sous Simulink pour etudier son fonctionnement de maniere plus precise. D'autre part, on a modelise un systeme de stockage de chaleur ideal pour quantifier l'apport maximal d'un TES sur les performances du SHEDAC. Nous avons conclu que les TES les plus adaptes aux systemes SHEDAC etaient les solutions actives directes a deux reservoirs, et que, pour beneficier au maximum du systeme de stockage de chaleur, il etait interessant de realiser la detente de l'air comprime stocke dans un moteur a air comprime, pour maximiser la recuperation d'energie mecanique.

  14. Contribution to the study of deformed heavy nuclei by means of nuclear reactions; Contribution a l'etude des noyaux lourds deformes au moyen de reactions nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Gastebois, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-06-01

    The experimental results obtained in the study of the (d,p) reactions, at E{sub d} = 12 MeV, on the three even-even deformed nuclei {sup 170}Yb, {sup 172}Yb and {sup 174}Yb have been analysed in terms of DWBA calculations. The spectroscopic information relative to the odd final nuclei have been compared with the predictions of the collective model and of the Nilsson's model. The effect of various parameters used in the DWBA analysis (form factors, optical wave functions) has been carefully studied. The observed differences between the three final nuclei are qualitatively reproduced in the experimental study of resonances, seen in excitation functions of elastically and inelastically scattered protons on the same target nuclei, and corresponding to analogue states in the three nuclei {sup 171}Lu, {sup 173}Lu and {sup 175}Lu. (author) [French] Les resultats experimentaux de l'etude des reactions (d.p) a E{sub d} = 12 MeV, sur les noyaux deformes pairs-pairs {sup 170}Yb, {sup 172}Yb et {sup 174}Yb ont ete interpretes dans le cadre de l'approximation de Born des ondes deformees. Les informations spectroscopiques relatives aux noyaux impairs finals ont ete comparees aux predictions du modele collectif et du modele de Nilsson, apres avoir examine avec soin l'influence des differents parametres (facteurs de forme, fonctions d'onde 'optiques') utilises lors de l'analyse. Les differences observees entre les trois noyaux finals sont qualitativement reproduites par les resultats experimentaux de l'etude de resonances dans les fonctions d'excitation de diffusion elastique et inelastique de protons sur les memes noyaux-cibles, lors de la recherche d'etats analogues dans les noyaux {sup 171}Lu, {sup 173}Lu et {sup 175}Lu. (auteur)

  15. Frontiers in nuclear medicine and technology. Editorial

    NARCIS (Netherlands)

    Lemahieu, I; Viergever, M.A.; van Rijk, P.P.; Dierckx, R.A.

    This special issue of Computerized Medical Imaging and Graphics contains the full length papers of invited oral communications presented at the symposium entitled: “Frontiers in Nuclear Medicine Technology” held at the Studie Centrum voor Kernenergie — Centre d'Etude de l'Energie Nucléaire (SCK —

  16. Study and achievement of a digital-analog-divider; Etude et realisation d'un diviseur-analogique-numerique

    Energy Technology Data Exchange (ETDEWEB)

    Petin, A. [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

    1969-04-01

    theorie du systeme, les paragraphes suivants presentent la recherche d'un schema synoptique, l'etude des circuits et la realisation. (auteur)

  17. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels...

  18. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  19. Prospective economical study of the nuclear power file; Etude economique prospective de la filiere electrique nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Charpin, J.M. [Commissariat General du Plan, 75 - Paris (France); Dessus, B. [Ecodev-CNRS, 92 - Meudon (France); Pellat, R. [CEA, 75 - Paris (France)

    2000-07-01

    On May 7, 1999 an economical study of the overall nuclear file, and in particular, of the back-end part of the fuel cycle and including the reprocessing, was requested by the French Prime Minister. This study includes the cost comparisons with the other means of power production and takes into consideration the environmental costs. The study is shared into five chapters dealing with: 1 - the legacy of the past: todays park of nuclear plants, economical and material status; 2 - the international evolution: the dynamics of nuclear policies worldwide (existing parks and R and D programs), the rise of environmental problems worldwide (CO{sub 2} and the climate convention, nuclear risks, attempts of including environment in the power costs), the choices made for the management of spent fuels in the main countries; 3 - the technological prospects for the power production and use: technologies for the mastery of power demand (residential, industrial and tertiary sectors, power transportation), technologies of power production (production from nuclear, fossil and renewable energies); 4 - prospective scenarios for France: two demand scenarios at the year 2050 vista (energy, electric power), power supply (supply structure with respect to scenarios, nuclear parks, power capacities), environmental aspects (CO{sub 2} emissions, plutonium and minor actinides production); 5 - the economical status of the different scenarios: data preparation, fossil fuel price scenarios, investment and operation costs of the different power production means (nuclear, fossil and renewable energies, natural gas and power distribution networks), comparison between fluxes and cumulated economic costs linked with the different scenarios (investments, exploitation, fuels, R and D, status for 2000 to 2050), time structure of expenditures with respect to the different scenarios (chronology, statuses, kWh costs, sensitivity with respect to the rate of discount, valorization of existing parks in 2050

  20. Earthing Technology

    NARCIS (Netherlands)

    Blok, Vincent

    2017-01-01

    In this article, we reflect on the conditions under which new technologies emerge in the Anthropocene and raise the question of how to conceptualize sustainable technologies therein. To this end, we explore an eco-centric approach to technology development, called biomimicry. We discuss opposing

  1. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  2. Etude socio-economique de production d'une pate traditionnelle ...

    African Journals Online (AJOL)

    Les résultats obtenus à l'issu de ces travaux montrent que: les technologies utilisées à Abomey et Bohicon diffèrent de celle de Covè ; gowé est très apprécié par les consommateurs à cause de ses fonctions désaltérantes ; gowé est souvent consommé quand il fait chaud ; il est à la fois légèrement acide et sucré.

  3. Soulful Technologies

    DEFF Research Database (Denmark)

    Fausing, Bent

    2010-01-01

    or anthropomorphism is important for the branding of new technology. Technology is seen as creating a techno-transcendence towards a more qualified humanity which is in contact with fundamental human values like intuition, vision, and sensing; all the qualities that technology, industrialization, and rationalization......, - in short modernity - have taken away from human existence. What old technology has removed now comes back through new technology promoting a better humanity. The present article investigates how digital technology and affects are presented and combined, with examples from everyday imagery, e.g. TV......Samsung introduced in 2008 a mobile phone called "Soul" made with a human touch and including itself a "magic touch". Through the analysis of a Nokia mobile phone TV-commercials I want to examine the function and form of digital technology in everyday images. The mobile phone and its digital camera...

  4. Etude Climat no. 31 'Carbon offset projects in the agricultural sector'

    International Nuclear Information System (INIS)

    Foucherot, Claudine; Bellassen, Valentin

    2012-01-01

    Among the publications of CDC Climat Research, 'Climate Reports' offer in-depth analyses on a given subject. This issue addresses the following points: The agricultural sector accounts for 14% of global anthropogenic greenhouse gas emissions. If we also take into account carbon emissions and sequestration from upstream - production of fertilisers, deforestation, etc. - and downstream - bio-energies, etc. - the share rises to 30%. Many practices and technologies enable agriculture's impact on climate change to be reduced. According to a number of estimates that are summarised in this research, the agricultural sector's mitigation potential is of the same order of magnitude as its emissions over a period of 30 years. However, changing agricultural practices comes at a cost, and in most cases such changes are not made without economic incentives. Carbon offsetting projects are one of the economic tools available to reduce agricultural emissions by paying for metric tons of avoided CO 2 e emissions. A summary of the emission reductions enabled by agricultural projects to date is provided in this report. It covers most projects certified by quality assurance standards, including those set up by the Kyoto Protocol (Clean Development Mechanism and Joint Implementation) and those in the voluntary market (Verified Carbon Standard, Climate Action Reserve, Gold Standard, Chicago Climate Exchange, and American Carbon Registry). The assessment drawn up on this basis shows that emission reductions enabled through carbon offsetting are thousand times lower than actual emissions and their potential mitigation. Agricultural projects have reduced emissions by 14 MtCO 2 e in 2010, i.e. 7% of the reductions generated by all carbon offset projects across all sectors for this year. Initiatives focus on three technologies: - bio-energies (crop residues), - methanation of livestock waste, - and soil carbon sequestration using no-till practices. This is very little compared with the large

  5. Technology '90

    International Nuclear Information System (INIS)

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report

  6. Sensemaking technologies

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research scope: The scope of the project is to study technological implementation processes by using Weick's sensemaking concept (Weick, 1995). The purpose of using a social constructivist approach to investigate technological implementation processes is to find out how new technologies transform...... patterns of social action and interaction in organisations (Barley 1986; 1990, Orlikowski 2000). Current research in the field shows that new technologies affect organisational routines/structures/social relationships/power relations/dependencies and alter organisational roles (Barley 1986; 1990, Burkhardt......, Orlikowski 2000). Viewing the use of technology as a process of enactment opens up for investigating the social processes of interpreting new technology into the organisation (Orlikowski 2000). The scope of the PhD project will therefore be to gain a deeper understanding of how the enactment of new...

  7. Technological risks

    International Nuclear Information System (INIS)

    Klinke, A.; Renn, O.

    1998-01-01

    The empirical part about the technological risks deals with different technologies: nuclear energy, early warning systems of nuclear weapons and NBC-weapons, and electromagnetic fields. The potential of damage, the contemporary management strategies and the relevant characteristics will be described for each technology: risks of nuclear energy; risks of early warning systems of nuclear weapons and NBC-weapons; risks of electromagnetic fields. (authors)

  8. Technological risks

    Energy Technology Data Exchange (ETDEWEB)

    Klinke, A.; Renn, O. [Center of Technology Assessment in Baden-Wuerttemberg, Stuttgart (Germany)

    1998-07-01

    The empirical part about the technological risks deals with different technologies: nuclear energy, early warning systems of nuclear weapons and NBC-weapons, and electromagnetic fields. The potential of damage, the contemporary management strategies and the relevant characteristics will be described for each technology: risks of nuclear energy; risks of early warning systems of nuclear weapons and NBC-weapons; risks of electromagnetic fields. (authors)

  9. Technology alliances

    International Nuclear Information System (INIS)

    Torgerson, D.F.; Boczar, P.G.; Kugler, G.

    1991-10-01

    In the field of nuclear technology, Canada and Korea developed a highly successful relationship that could serve as a model for other high-technology industries. This is particularly significant when one considers the complexity and technical depth required to design, build and operate a nuclear reactor. This paper will outline the overall framework for technology transfer and cooperation between Canada and Korea, and will focus on cooperation in nuclear R and D between the two countries

  10. Chemistry Technology

    Data.gov (United States)

    Federal Laboratory Consortium — Chemistry technology experts at NCATS engage in a variety of innovative translational research activities, including:Design of bioactive small molecules.Development...

  11. Technology Catalogue

    International Nuclear Information System (INIS)

    1994-02-01

    The Department of Energy's Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM's Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM's Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department's clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD's applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina)

  12. Etude exploratoire des conceptions de la circulation sanguine aupres d'eleves de l'ordre collegial

    Science.gov (United States)

    Robitaille, Jean-Marc

    Il existe peu d'etudes sur les conceptions touchant les domaines de la biologie, notamment sur les conceptions de la circulation sanguine Nous avons observe egalement l'absence de recherche menee aupres d'eleves de l'ordre collegial sur cette question. Nous avons voulu combler une lacune en menant une recherche sur les conceptions de la circulation sanguine aupres d'eleves de l'ordre collegial. Pour mener cette recherche nous nous sommes inspires d'une methode developpee par Treagust (1988). Le premier niveau de formulation didactique etablit l'architecture du systeme et la fonction nutritive de la circulation. Le second niveau de formulation didactique decrit et relie les parametres de la dynamique de la circulation et leur relation: Pression, Debit et Resistance. Le troisieme niveau de formulation didactique s'interesse au controle de la circulation du sang dans un contexte d'homeostasie qui implique la regulation de la pression arterielle. Nous avons construit un questionnaire en nous guidant sur les niveaux de formulation didactique et l'analyse des entrevues menees aupres de dix-huit eleves, representatifs de la population cible. Ce questionnaire fut administre a un echantillon de 2300 eleves disperses dans six colleges de la region de Montreal. Notre echantillon comprend des eleves inscrits a des programmes de l'ordre collegial en Sciences de la nature et en Techniques de la sante et qui n'ont pas suivi le cours sur la circulation sanguine. Notre analyse des reponses des eleves de notre echantillon aux questions sur le premier niveau de formulation didactique revele que la majorite des eleves considerent que le systeme circulatoire relie les organes les uns aux autres dans un circuit en serie. Notre analyse revele egalement que la majorite des eleves estiment que les nutriments sont extraits du sang par les organes selon un processus de selection base sur les besoins determines par la fonction de l'organe. Ces besoins sont differents selon les organes qui ne

  13. Thermally activated technologies: Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  14. Technological Advancements

    Science.gov (United States)

    Kennedy, Mike

    2010-01-01

    The influx of technology has brought significant improvements to school facilities. Many of those advancements can be found in classrooms, but when students head down the hall to use the washrooms, they are likely to find a host of technological innovations that have improved conditions in that part of the building. This article describes modern…

  15. Maritime Technology

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1997-01-01

    Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text.......Elementary introduction to the subject "Maritime Technology".The contents include drawings, sketches and references in English without any supplementary text....

  16. Technology collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Jacob [Halliburton (Brazil)

    2011-07-01

    The aim of this paper is to present Halliburton's Brazilian technology center. Halliburton has technology centers in the United States, Saudi Arabia, India, Singapore and Brazil, all of which aim at delivering accelerated innovation in the oil sector. The technology centers engage in research and development activities with the help of various universities and in collaboration with the customer or supplier. The Halliburton Brazil technology center provides its customers with timely research and development solutions for enhancing recovery and mitigating reservoir uncertainty; they are specialized in finding solutions for pre- and post-salt carbonate drilling and in the enhancement of production from mature fields. This presentation showcased the work carried out by the Halliburton Brazil technology center to help customers develop their deepwater field activities.

  17. Sensemaking technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    Research objective: The object of the LOK research project is to gain a better understanding of the technological strategic processes in organisations by using the concept/metaphor of sensemaking. The project will investigate the technological strategies in organisations in order to gain a deeper...... understanding of the cognitive competencies and barriers towards implementing new technology in organisations. The research will therefore concentrate on researching the development process in the organisation's perception of the external environmental elements of customers, suppliers, competitors, internal...... and external technology and legislation and the internal environmental elements of structure, power relations and political arenas. All of these variables have influence on which/how technologies are implemented thus creating different outcomes all depending on the social dynamics that are triggered by changes...

  18. L'etude de l'InP et du GaP suite a l'implantation ionique de Mn et a un recuit thermique

    Science.gov (United States)

    Bucsa, Ioan Gigel

    Cette these est dediee a l'etude des materiaux InMnP et GaMnP fabriques par implantation ionique et recuit thermique. Plus precisement nous avons investigue la possibilite de former par implantation ionique des materiaux homogenes (alliages) de InMnP et GaMnP contenant de 1 a 5 % atomiques de Mn qui seraient en etat ferromagnetique, pour des possibles applications dans la spintronique. Dans un premier chapitre introductif nous donnons les motivations de cette recherche et faisons une revue de la litterature sur ce sujet. Le deuxieme chapitre decrit les principes de l'implantation ionique, qui est la technique utilisee pour la fabrication des echantillons. Les effets de l'energie, fluence et direction du faisceau ionique sur le profil d'implantation et la formation des dommages seront mis en evidence. Aussi dans ce chapitre nous allons trouver des informations sur les substrats utilises pour l'implantation. Les techniques experimentales utilisees pour la caracterisation structurale, chimique et magnetique des echantillons, ainsi que leurs limitations sont presentees dans le troisieme chapitre. Quelques principes theoriques du magnetisme necessaires pour la comprehension des mesures magnetiques se retrouvent dans le chapitre 4. Le cinquieme chapitre est dedie a l'etude de la morphologie et des proprietes magnetiques des substrats utilises pour implantation et le sixieme chapitre, a l'etude des echantillons implantes au Mn sans avoir subi un recuit thermique. Notamment nous allons voir dans ce chapitre que l'implantation de Mn a plus que 1016 ions/cm 2 amorphise la partie implantee du materiau et le Mn implante se dispose en profondeur sur un profil gaussien. De point de vue magnetique les atomes implantes se trouvent dans un etat paramagnetique entre 5 et 300 K ayant le spin 5/2. Dans le chapitre 7 nous presentons les proprietes des echantillons recuits a basses temperatures. Nous allons voir que dans ces echantillons la couche implantee est polycristalline et les

  19. Etude Climat no. 33 'Joint Implementation: a frontier mechanism within the borders of an emissions cap'

    International Nuclear Information System (INIS)

    Shishlov, Igor; Bellassen, Valentin; Leguet, Benoit

    2012-01-01

    Among the publications of CDC Climat Research, 'Climate Reports' offer in-depth analyses on a given subject. This issue addresses the following points: Based on specific projects rather than economy-wide emissions reductions, and driven by the demand from the installations covered by the European Union Emissions Trading Scheme (EU ETS), Joint Implementation (JI) turned out to be a largely private sector mechanism. Besides attracting private investors in GHG abatement projects, JI creates an opportunity for countries to exploit the arbitrage price spread between different carbon offsets: Emission Reduction Units (ERU), the credits issued from JI projects, trade with a premium of up to 50% over Assigned Amount Units (AAU), the country-level carbon allowances. Some countries, like for instance Ukraine, quickly realized the added value of JI and boosted its development, while in others, like Russia, JI lacked political support and efficient frameworks took time to be established. According to the ERU supply forecasting model developed by CDC Climat Research, Annex I countries are expected to generate up to 356 million ERUs for the first Kyoto commitment period. Around 80% of these credits shall originate from Russia and Ukraine, and up to 70 million shall be generated from countries participating in the EU ETS. Within the EU, JI has been used as a 'frontier mechanism': JI projects mostly explored abatement opportunities not covered by the scheme and, as highlighted by the case of nitrous oxide emissions from the production of nitric acid, played an important role in identifying abatement technologies and providing information to extend the scope of the EU ETS. One of the most complex issues related to JI is the practice of additionality. The cases of France and Ukraine demonstrate that the stakes associated with additionality may differ depending on a country's compliance position. In Ukraine, additionality was not perceived as a significant economic risk due to a

  20. Etude des transformations de phase dans les alliages de titane, 2; contribution à l'étude des transformation de l'alliage de titane TA6 V6 E2 en conditions isothermes après trempe à partir du domaine $(\\alpha + \\beta)$

    CERN Document Server

    Fontalirand, C; Fidelle, J P; Hocheid, B; Beauvais, C no 1; Fidelle, J P no 2; Hocheid, B no 2; Fontalirand, C no 1

    1974-01-01

    Etude des transformations de phase dans les alliages de titane, 2; contribution à l'étude des transformation de l'alliage de titane TA6 V6 E2 en conditions isothermes après trempe à partir du domaine $(\\alpha + \\beta)$

  1. Etude des phenomenes de penetration des especes chimiques dans les revetements cathodiques des cuves d'electrolyse de l'aluminium

    Science.gov (United States)

    Brisson, Pierre-Yves

    Cette these decrit l'etude effectuee sur les phenomenes d'insertion du sodium et de penetration du bain electrolytique dans les revetements cathodiques des cuves d'electrolyse de l'aluminium. L'etude fut effectuee a l'aide d'un montage permettant d'effectuer l'electrolyse en laboratoire. Trois types de revetement cathodiques furent etudies : des blocs semi-graphitique, des blocs graphitiques et des blocs graphitises. L'insertion du sodium dans les trois differents types de blocs fut etudiee a l'aide de la spectrometrie des photoelectrons X (XPS). L'analyse a permis de mettre en evidence deux formes de sodium dans l'anthracite et la phase liante des materiaux semi-graphitiques et graphitiques, indiquant qu'une fraction du sodium se retrouve sous forme adsorbee dans les micropores des materiaux alors que l'autre fraction est inseree dans la structure cristalline du carbone. Dans les phases graphitiques (materiaux graphitises et graphitiques), seuls les micropores sont occupes par le sodium Ce resultat explique la tendance observee selon laquelle l'ajout de graphite dans les blocs permet d'abaisser le gonflement sodique. Les mecanismes de penetration du bain dans le reseau poreux des materiaux furent etudies en microscopie electronique et en diffraction des rayons X sur des echantillons apres differents temps d'electrolyses et en variant l'atmosphere (soit sous argon ou sous azote). Ces analyses ont permis d'identifier le mecanisme conduisant a la mouillabilite du bain sur le carbone en fonction de l'atmosphere entourant l'electrolyse. Ainsi, sous azote, la formation de NaCN dans les pores des materiaux par reactions entre le sodium et l'azote permet une mouillabilite accrue du bain alors qu'en absence d'azote (sous argon), le carbure d'aluminium, formes a la surface des pores, joue un role similaire. Dans ce dernier cas, la penetration du bain est moins rapide etant donnee la necessite de toujours amener des especes contenant de l'aluminium en tete du front de

  2. Ergonomics technology

    Science.gov (United States)

    Jones, W. L.

    1977-01-01

    Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

  3. Etude du transfert thermique conjugue dans les cavites rectangulaires en convection naturelle

    Science.gov (United States)

    Nouanegue, Herve Frank

    Energy conservation is one of the most important areas of research and development. In parallel and in conjunction with it, developing clean energy technologies using renewable energy sources is similarly an important area to provide a sustainable energy supply. In this way, the quality of life will continue to flourish and at the same time the environment will be protected. For this purpose, devices operating on the principal of passive utilization techniques are used in different applications such as solar collectors, passive cooling and heating of buildings and others. Many of these applications make use of open and/or closed enclosures having different geometries, in which heat transfer by natural convection is used often with conjunction of conduction and surface radiation. To have the best thermal performance of these devices, the understanding of conjugate heat transfer in basic geometries is essential. The aim of this thesis is to study the influence of conduction and radiation heat transfer on natural convection in rectangular enclosures with different geometries and properties. A mathematical model of the system is developed which combines heat transfer by convection, conduction and radiation. A numeric code based on the volume control method is developed to simulate open and close systems with different geometries, in which the conservation equations of mass, momentum and energy are solved using the control volume method and the radiation heat exchange equations are added by calculating radiative heat flux on the emitting surfaces and treating it as a local heat source for the conjugate heat transfer by the three modes. Four specific configurations have been studied. The first one is a closed square inclined cavity containing a massive wall. The second configuration is an open cavity. The last two configurations involve passive cooling and heating systems in which the air circulates in long vertical channels. Numerical results for all the configuration

  4. Etude d'un systeme de trigeneration decentralise en climats canadiens

    Science.gov (United States)

    Allaire Tanguay, Dominique

    Ce mémoire présente l'étude d'un système de trigénération ou CCHP (combined cooling, heating and power) au gaz naturel fournissant les besoins thermiques à un immeuble à logement typique de 13 étages. Un groupe électrogène permettant de générer de l'électricité tout en fournissant de l'eau chaude assure le chauffage du bâtiment et de l'eau chaude sanitaire tandis qu'une machine à absorption ammoniac-eau permet de transformer cette chaleur en puissance frigorifique afin de climatiser le bâtiment en période chaude. Le modèle de cette machine à absorption a spécialement été conçu pour fonctionner avec une température de désorption basse et permet d'évaluer les performances de telles machines dans des situations hors design. Ce modèle à été vérifié à l'aide d'autres modèles avérés et propose des coefficients de performance de l'ordre de 0,7 à 0,8. L'évaluation des performances horaires de ce système est présentée pour une année standard sous trois climats canadiens. Ces performances sont ensuite comparées aux différentes méthodes employées pour assurer ces besoins ainsi que pour générer l'électricité supplémentaire. Les résultats démontrent d'excellentes performances même lorsque comparées aux plus récentes technologies. Les résultats passent d'une légère augmentation de la consommation de gaz naturel dans un climat chaud comme Toronto à une importante réduction dans un climat froid comme Edmonton. Ce système permet donc de combler les besoins thermiques d'un bâtiment tout en générant de l'électricité dans des périodes de pointes annuelles et possiblement journalières. Plusieurs études dont notamment l'optimisation du système et le couplage à d'autres types de bâtiment permettrait cependant de mieux évaluer les possibilités complètes de la trigénération. Mots-clés : Trigénération, CCHP, Absorption, Ammoniac-eau, cogénération.

  5. Clinical and symptomatological study of pigs subjected to a lethal dose of integral gamma irradiation; Etude clinique et symptomatologique chez le porc soumis a une irradiation gamma totale a dose letale

    Energy Technology Data Exchange (ETDEWEB)

    Vaiman, M.; Guenet, J.-L.; Maas, J.; Nizza, P

    1966-05-01

    Results are reported from a clinical and haematological study on a Corsican species of pigs wholly exposed to an approximately lethal dose of {gamma} radiation. The aim of this work was to examine the changes in the irradiation syndrome of irradiation for pigs to make it thus possible to devise further experiments, in particular in the therapeutic field. The dose received was 285 rads (measured as the absorption in the vertical antero-posterior medial plane). Data are presented on cyto-haematological changes in the blood circulating immediately after irradiation, and followed up to death, and changes in the medullary cytology after irradiation. The clinical picture of lethal radiation injury in swine is described. (authors) [French] Les auteurs rapportent les resultats d'une etude clinique et hematologique chez des porcs de race corse irradies in toto a dose sensiblement letale. Le but de cette etude etait de connaitre l'evolution du syndrome aigu d'irradiation chez le porc et de permettre ainsi le developpement d'experimentations ulterieures, en particulier dans le domaine therapeutique. La dose delivree etait de 285 rad (en dose absorbee au niveau du plan median vertical anteroposterieur. L'etude a porte essentiellement: 1. Sur les modifications cyclo-hematologiques du sang circulant immediatement apres l'irradiation, pour les differentes lignees cellulaires; l'evolution de ces modifications a ete notee jusqu'a la mort; 2. Sur les modifications de la cytologie medullaire apres irradiation (evolution du myelogramme et essai d'evaluation de la cellularite de la moelle osseuse);: 3. Sur les signes cliniques, d'ailleurs tres discrets, observes chez les porcs apres irradiation. (auteurs)

  6. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  7. Videodisc technology

    Energy Technology Data Exchange (ETDEWEB)

    Marsh, F.E. Jr.

    1981-03-01

    An overview of the technology of videodiscs is given. The emphasis is on systems that use reflection or transmission of laser light. Possible use of videodiscs for storage of bibliographic information is considered. 6 figures, 3 tables. (RWR)

  8. Technology | FNLCR

    Science.gov (United States)

    The Frederick National Laboratory develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.

  9. Globalization & technology

    DEFF Research Database (Denmark)

    Narula, Rajneesh

    of innovation" understanding of learning. Narula and Smith reconcile an important paradox. On the one hand, locations and firms are increasingly interdependent through supranational organisations, regional integration, strategic alliances, and the flow of investments, technologies, ideas and people......Technology and globalization are interdependent processes. Globalization has a fundamental influence on the creation and diffusion of technology, which, in turn, affects the interdependence of firms and locations. This volume examines the international aspect of this interdependence at two levels....... The boundaries of firms and countries are increasingly porous and imprecise, because firms use alliances and outsourcing, and countries are rarely technologically self-sufficient. On the other hand, locations remain distinct and idiosyncratic, with innovation systems remaining largely nationally bound. Knowledge...

  10. Plasma technology

    International Nuclear Information System (INIS)

    Drouet, M.G.

    1984-03-01

    IREQ was contracted by the Canadian Electrical Association to review plasma technology and assess the potential for application of this technology in Canada. A team of experts in the various aspects of this technology was assembled and each team member was asked to contribute to this report on the applications of plasma pertinent to his or her particular field of expertise. The following areas were examined in detail: iron, steel and strategic-metals production; surface treatment by spraying; welding and cutting; chemical processing; drying; and low-temperature treatment. A large market for the penetration of electricity has been identified. To build up confidence in the technology, support should be provided for selected R and D projects, plasma torch demonstrations at full power, and large-scale plasma process testing

  11. Exploration technology

    Energy Technology Data Exchange (ETDEWEB)

    Roennevik, H.C. [Saga Petroleum A/S, Forus (Norway)

    1996-12-31

    The paper evaluates exploration technology. Topics discussed are: Visions; the subsurface challenge; the creative tension; the exploration process; seismic; geology; organic geochemistry; seismic resolution; integration; drilling; value creation. 4 refs., 22 figs.

  12. Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, F. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces

  13. Experimental study of contamination by inhalation of radioactive iodine aerosols. Biological balance; Etude experimentale de la contamination par inhalation d'aerosols d'iode radioactif bilan biologique

    Energy Technology Data Exchange (ETDEWEB)

    Marble, G. [Commissariat a l' Energie Atomique, 92 - Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    Several articles have been published concerning research into contamination produced by inhalation of radioactive iodine aerosols in monkeys. Results dealing with the biological balance of this contamination are presented and discussed in this report. (author) [French] L'etude experimentale de la contamination par inhalation d'aerosols d'iode radioactif effectuee chez le singe a fait l'objet de plusieurs publications. Les resultats concernant le bilan biologique de cette contamination sont presentes et discutes dans ce rapport. (auteur)

  14. Lasers technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners

  15. Cognitive technologies

    CERN Document Server

    Mello, Alan; Figueiredo, Fabrício; Figueiredo, Rafael

    2017-01-01

    This book focuses on the next generation optical networks as well as mobile communication technologies. The reader will find chapters on Cognitive Optical Network, 5G Cognitive Wireless, LTE, Data Analysis and Natural Language Processing. It also presents a comprehensive view of the enhancements and requirements foreseen for Machine Type Communication. Moreover, some data analysis techniques and Brazilian Portuguese natural language processing technologies are also described here. .

  16. Physical activity patterns in the French 18-74-year-old population: French Nutrition and Health Survey (Etude Nationale Nutrition Santé, ENNS) 2006-2007.

    Science.gov (United States)

    Salanave, Benoit; Vernay, Michel; Szego, Emmanuelle; Malon, Aurélie; Deschamps, Valérie; Hercberg, Serge; Castetbon, Katia

    2012-11-01

    To describe detailed physical activity and sedentary behaviour in French adults across physical activity categories. The French Nutrition and Health Survey (Etude Nationale Nutrition Santé, ENNS), conducted in 2006-2007, was a national cross-sectional survey based on three-stage random sampling. The International Physical Activity Questionnaire (IPAQ) was used to classify participants into three physical activity categories. Time spent in a sitting position and time spent in front of a screen were used as markers of sedentary behaviour. France. Adults (n 2971) aged 18 to 74 years were included. Overall, 29·5 % of men and 23·6 % of women were classified into the high-IPAQ category, while 36·1 % of men and 37·5 % of women were in the low-IPAQ category. For each intensity level of physical activity (vigorous intensity, moderate intensity or walking), the number of active days per week decreased from the high- to the low-IPAQ category and daily duration of physical activity was longer in the high-IPAQ category than in the other two categories; 6 % of adults declared neither vigorous nor moderate nor walking activities. For most adults in the low-IPAQ category, an increasing number of active days per week would be sufficient to attain the moderate-IPAQ category. This should be taken into account in public health initiatives aimed at promoting physical activity.

  17. Smoking Trajectories during the Perinatal Period and Their Risk Factors: The Nationally Representative French ELFE (Etude Longitudinale Française Depuis l'Enfance) Birth Cohort Study.

    Science.gov (United States)

    El-Khoury, Fabienne; Sutter-Dallay, Anne-Laure; Van Der Waerden, Judith; Surkan, Pamela; Martins, Silvia; Keyes, Katherine; de Lauzon-Guillain, Blandine; Charles, Marie-Aline; Melchior, Maria

    2017-01-01

    In France, rates of perinatal smoking are among the highest worldwide; however, perinatal smoking trajectories and associated factors have still not been adequately researched. Among women participating in the French nationally representative etude longitudinale française depuis l'enfance birth cohort (n = 15,540), perinatal smoking trajectories were estimated using group-based modelling. Associated characteristics were studied using multinomial logistic regression. Four trajectories were identified: non-smokers (59%), quitters (20%), persistent moderate (12%) and persistent heavy (9%) smokers. Older age, being native French, low socioeconomic position, persistent psychological difficulties and alcohol use in pregnancy, lack of social support, partner's smoking, mistimed pregnancy, and child formula feeding at birth were associated with persistent heavy smoking. Most of these factors were also associated, but to a lesser extent, with persistent moderate smoking, except for age and migrant status, which had opposite effects. Women who successfully lost weight prior to pregnancy had higher levels of quitting smoking. Women's long-term smoking trajectories vary in terms of initial tobacco consumption level but also in relation to socio-demographic, psychological, behavioral and partner characteristics. Health professionals in contact with pregnant smokers should address perceived risks and benefits of smoking, including partner's smoking and weight-gain concerns. © 2017 S. Karger AG, Basel.

  18. A microcosm of musical expression. I. Quantitative analysis of pianists' timing in the initial measures of Chopin's Etude in E major.

    Science.gov (United States)

    Repp, B H

    1998-08-01

    Patterns of expressive timing were measured in bars 1-5 of 115 commercially recorded performances of Chopin's Etude in E major, op. 10, No. 3. These patterns were subjected to principal components analysis, which suggested at least four independent "timing strategies": (1) major ritards at the ends of melodic gestures; (2) acceleration within some of these gestures, without final ritards; (3) extreme lengthening of the initial downbeat; and (4) ritards between as well as within melodic gestures. Strategies 1 and 4 respond in different ways to the melodic-rhythmic grouping structure of the music, and strategy 3 merely represents a local emphasis. Strategy 2 is the one most difficult to rationalize; it does not seem to represent an alternative structural interpretation of the music but rather an alternative gestural shaping. Each individual pianist's timing pattern could be described as a weighted combination of these four strategies plus idiosyncratic variation. A wide variety of combinations was represented, and no two individual patterns were exactly the same. In addition, there was a wide range of basic tempi and of degrees of tempo modulation. There were no strong relationships between any of these variables and sociocultural characteristics of the artists, although some weak trends were observed.

  19. A microcosm of musical expression. III. Contributions of timing and dynamics to the aesthetic impression of pianists' performances of the initial measures of Chopin's Etude in E major.

    Science.gov (United States)

    Repp, B H

    1999-07-01

    Four judges repeatedly assessed the overall aesthetic quality of more than 100 recorded performances of the opening of Chopin's Etude in E major on a 10-point scale. The judgments, which exhibited reasonable reliability and modest intercorrelations, were entered into regression analyses with 16 independent variables derived from earlier objective analyses of the expressive timing and dynamics of the performances [Repp, J. Acoust. Soc. Am. 104, 1085-1100 (1998); 105, 1972-1988 (1999)]. Only between 9% and 18% of the variance in the judges' ratings was accounted for. By contrast, timing variables accounted for 53% of the variance in one judge's ratings of synthesized performances that varied in timing only and mimicked the timing patterns of the original performances. These results indicate, first, that the aesthetic impression of the original recordings rested primarily on aspects other than those measured (such as texture, tone, or aspects of timing and dynamics that eluded the earlier analyses) and, second, that very different patterns of timing and dynamics are aesthetically acceptable for the same music, provided that other, aesthetically more crucial performance aspects are present.

  20. A microcosm of musical expression: II. Quantitative analysis of pianists' dynamics in the initial measures of Chopin's Etude in E major.

    Science.gov (United States)

    Repp, B H

    1999-03-01

    Patterns of expressive dynamics were measured in bars 1-5 of 115 commercially recorded performances of Chopin's Etude in E major, op. 10, No. 3. The grand average pattern (or dynamic profile) was representative of many performances and highly similar to the average dynamic profile of a group of advanced student performances, which suggests a widely shared central norm of expressive dynamics. The individual dynamic profiles were subjected to principal components analysis, which yielded Varimax-rotated components, each representing a different, nonstandard dynamic profile associated with a small subset of performances. Most performances had dynamic patterns resembling a mixture of several components, and no clustering of of performances into distinct groups was apparent. Some weak relationships of dynamic profiles with sociocultural variables were found, most notably a tendency of female pianists to exhibit a greater dynamic range in the melody. Within the melody, there were no significant relationships between expressive timing [Repp, J. Acoust. Soc. Am. 104, 1085-1100 (1998)] and expressive dynamics. These two important dimensions seemed to be controlled independently at this local level and thus offer the artist many degrees of freedom in giving a melody expressive shape.

  1. Electronic temperature measurement on the deca II plasma using the Bremsstrahlung; Mesure de la temperature electronique du plasma de deca II par etude du rayonnement de freinage

    Energy Technology Data Exchange (ETDEWEB)

    Dumas, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-06-01

    The electronic temperature of the DECA II machine's plasma is determined by studying the Bremsstrahlung. Two types of detectors are used for this measurement, a set scintillator-photo-multiplicator and a photoelectric effect detector with a massive silver target. The method used is the classical 'absorbent method', The absorbents used are thin formvar foils whose thickness is between 600 and 12 500 angstrom. The measurements done in two different working conditions of the DECA II machine have given: Te {approx_equal} 200 eV in the first case and Te {approx_equal} 70 eV in the second case. (author) [French] Nous avons determine la temperature electronique du plasma de la machine DECA II par l'etude du rayonnement de freinage. Pour cette mesure nous avons utilise deux types de detecteurs: des ensembles scintillateur-photomultiplicateur et un detecteur a effet photoelectrique a cible massive en argent. La methode utilisee pour cette mesure est la classique methode des absorbants. Nous avons utilise des feuilles de format tres mince (de 600 a 12 500 angstrom) comme absorbant. Les mesures faites dans deux regimes de travail differents de la machine DECA II nous ont conduit a: Te {approx_equal} 200 eV dans un cas et Te {approx_equal} eV dans l'autre cas. (auteur)

  2. Etudes optiques de nouveaux materiaux laser: Des orthosilicates dopes a l'ytterbium: Le yttrium (lutetium,scandium) pentoxide de silicium

    Science.gov (United States)

    Denoyer, Aurelie

    La decouverte et l'elaboration de nouveaux materiaux laser solides suscitent beaucoup d'interet parmi la communaute scientifique. En particulier les lasers dans la gamme de frequence du micron debouchent sur beaucoup d'applications, en telecommunication, en medecine, dans le domaine militaire, pour la, decoupe des metaux (lasers de puissance), en optique non lineaire (doublage de frequence, bistabilite optique). Le plus couramment utilise actuellement est le Nd:YAG dans cette famille de laser, mais des remplacants plus performants sont toujours recherches. Les lasers a base d'Yb3+ possedent beaucoup d'avantages compares aux lasers Nd3+ du fait de leur structure electronique simple et de leur deterioration moins rapide. Parmi les matrices cristallines pouvant accueillir l'ytterbium, les orthosilicates Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5 se positionnent tres bien, du fait de leur bonne conductivite thermique et du fort eclatement de leur champ cristallin necessaire a l'elaboration de lasers quasi-3 niveaux. De plus l'etude fine et systematique des proprietes microscopiques de nouveaux materiaux s'avere toujours tres interessante du point de vue de la recherche fondamentale, c'est ainsi que de nouveaux modeles sont concus (par exemple pour le champ cristallin) ou que de nouvelles proprietes inhabituelles sont decouvertes, menant a de nouvelles applications. Ainsi d'autres materiaux dopes a l'ytterbium sont connus pour leurs proprietes de couplage electron-phonon, de couplage magnetique, d'emission cooperative ou encore de bistabilite optique, mais ces proprietes n'ont encore jamais ete mises en evidence dans Yb:Y 2SiO5, Yb:Lu2SiO5 et Yb:Sc2SiO 5. Ainsi, cette these a pour but l'etude des proprietes optiques et des interactions microscopiques dans Yb:Y2SiO 5, Yb:Lu2SiO5 et Yb:Sc2SiO5. Nous utilisons principalement les techniques d'absorption IR et de spectroscopie Raman pour determiner les excitations du champ cristallin et les modes de vibration dans le materiau

  3. Processing Th C{sub 2} - UC{sub 2} fuel extracted from high temperature reactors HTGCR; Etude du traitement des combustibles Th C{sub 2} - UC{sub 2} issus de reacteurs a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Derrien, C.; Lessart, P.; Pianezza, E.; Verry, C.; Villain, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The object of this investigation is solubilisation head-end (from crushing and grinding phase to non included first purification phase) of pulverulent ({sup 233}U/{sup 232}Th)C{sub 2} (200 - 500 microns diameter) contained in a graphite matrix extracted from a 4.10{sup 13} n.cm{sup -2}.s{sup -1} thermalized neutrons average flux with an irradiation of 80000 MWjT{sup -1} HTGCR reactor. After having succinctly described different bibliographic processes we have chosen the burn - leach of reactor fuel and graphite matrix containing it. The technology of burner is original in nuclear field and still more by utilizing ultra-sounds to intensify burning reaction and to minimize the weight of unburnables. The mixture of ThO{sub 2}, U{sub 3}O{sub 8}, and fission products oxides is solubilized by boiling HNO{sub 3} 13 M + HF 0.05 M. This process is profit-learning in a thorium recuperation and reprocessing point of view. In the contrary-case it would be interesting to consider a dry-process which would permit to separate solid ThF{sub 4} from gaseous UF{sub 6}. (authors) [French] Cette etude a pour objet le traitement initial de mise en solution ou 'head-end' (allant de la phase broyag-concassage a la phase de premiere purification exclue) d'un combustible ({sup 233}U/{sup 232}Th)C{sub 2} pulverulent (de 200 a 500 {mu} de diametre) contenu dans une matrice de graphite issu d'un reacteur HTGCR surgenerateur a neutrons thermiques de flux moyen 4. l0{sup 13} n.cm{sup -2}.s{sup -1} et taux d'irradiation 80000 MWjT{sup -1}. Apres exposition succincte des differents procedes bibliographiques decrits, nous avons finalement choisi le traitement par combustion-attaque ('Burn-Leach') du combustible et de la matrice etanche graphite qui le contient. La technologie du bruleur est originale dans le domaine nucleaire d'autant qu'elle utilise les ultra-sons pour ameliorer le rendement de la reaction de combustion et reduire au minimum le poids

  4. Technology cycles and technology revolutions

    Energy Technology Data Exchange (ETDEWEB)

    Paganetto, Luigi; Scandizzo, Pasquale Lucio

    2010-09-15

    Technological cycles have been characterized as the basis of long and continuous periods economic growth through sustained changes in total factor productivity. While this hypothesis is in part consistent with several theories of growth, the sheer magnitude and length of the economic revolutions experienced by humankind seems to indicate surmise that more attention should be given to the origin of major technological and economic changes, with reference to one crucial question: role of production and use of energy in economic development.

  5. Persuasive Technology

    DEFF Research Database (Denmark)

    This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included in this vol......This book constitutes the proceedings of the 5th International Conference on Persuasive Technology, PERSUASIVE 2010, held in Copenhagen Denmark in June 2010. The 25 papers presented were carefully reviewed and selected from 80 submissions. In addition three keynote papers are included...... in this volume. The topics covered are emotions and user experience, ambient persuasive systems, persuasive design, persuasion profiles, designing for health, psychology of persuasion, embodied and conversational agents, economic incentives, and future directions for persuasive technology....

  6. Seafood Technology

    DEFF Research Database (Denmark)

    Børresen, Torger

    This presentation will fill the total picture of this conference between fisheries and aquaculture, blue biotech and bioconservation, by considering the optimal processing technology of marine resources from the raw material until the seafood reaches the plate of the consumer. The situation today...... must be performed such that total traceability and authenticity of the final products can be presented on demand. The most important aspects to be considered within seafood technology today are safety, healthy products and high eating quality. Safety can be divided into microbiological safety...... and not presenting any safety risk per se. Seafood is healthy due to the omega-3 fatty acids and the nutritional value of vitamins, peptides and proteins. The processing technology must however be performed such that these valuable features are not lost during production. The same applies to the eating quality. Any...

  7. Smart technology

    International Nuclear Information System (INIS)

    Bruckner, D.G.

    1991-01-01

    The success of smart technology in the pursuit of the Gulf War has accentuated the awareness of how the Safeguards and Security disciplines are changing in response to new weaponry. Throughout the Department of Energy Integrated Complex (IC) Safeguards and Security efforts such as: Protection Programs Operations; Materials, Controls and Accountability; Information Security; Computer Security; Operational Security; Personnel Security, Safeguards and/or Security (S and S) surveys, and Inspections and Evaluations are undergoing a reassessment and refocusing. Some of this is in response to such things as the DOE initiated Freeze Report and the Drell Report. An important aspect is also technological, adjusting the way business is done in light of the weapons, tools and processes/procedures becoming available. This paper addresses the S and S issues with the promise of using smart technology to develop new approaches and equipment across the IC

  8. Technology Transfer

    Science.gov (United States)

    Smith, Nanette R.

    1995-01-01

    The objective of this summer's work was to attempt to enhance Technology Application Group (TAG) ability to measure the outcomes of its efforts to transfer NASA technology. By reviewing existing literature, by explaining the economic principles involved in evaluating the economic impact of technology transfer, and by investigating the LaRC processes our William & Mary team has been able to lead this important discussion. In reviewing the existing literature, we identified many of the metrics that are currently being used in the area of technology transfer. Learning about the LaRC technology transfer processes and the metrics currently used to track the transfer process enabled us to compare other R&D facilities to LaRC. We discuss and diagram impacts of technology transfer in the short run and the long run. Significantly, it serves as the basis for analysis and provides guidance in thinking about what the measurement objectives ought to be. By focusing on the SBIR Program, valuable information regarding the strengths and weaknesses of this LaRC program are to be gained. A survey was developed to ask probing questions regarding SBIR contractors' experience with the program. Specifically we are interested in finding out whether the SBIR Program is accomplishing its mission, if the SBIR companies are providing the needed innovations specified by NASA and to what extent those innovations have led to commercial success. We also developed a survey to ask COTR's, who are NASA employees acting as technical advisors to the SBIR contractors, the same type of questions, evaluating the successes and problems with the SBIR Program as they see it. This survey was developed to be implemented interactively on computer. It is our hope that the statistical and econometric studies that can be done on the data collected from all of these sources will provide insight regarding the direction to take in developing systematic evaluations of programs like the SBIR Program so that they can

  9. Technology applications

    Science.gov (United States)

    Anuskiewicz, T.; Johnston, J.; Leavitt, W.; Zimmerman, R. R.

    1972-01-01

    A summary of NASA Technology Utilization programs for the period of 1 December 1971 through 31 May 1972 is presented. An abbreviated description of the overall Technology Utilization Applications Program is provided as a background for the specific applications examples. Subjects discussed are in the broad headings of: (1) cancer, (2) cardiovascular disease, (2) medical instrumentation, (4) urinary system disorders, (5) rehabilitation medicine, (6) air and water pollution, (7) housing and urban construction, (8) fire safety, (9) law enforcement and criminalistics, (10) transportation, and (11) mine safety.

  10. Architectural technology

    DEFF Research Database (Denmark)

    2005-01-01

    The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...

  11. Technology Transfer: Marketing Tomorrow's Technology

    Science.gov (United States)

    Tcheng, Erene

    1995-01-01

    The globalization of the economy and the end of the Cold War have triggered many changes in the traditional practices of U.S. industry. To effectively apply the resources available to the United States, the federal government has firmly advocated a policy of technology transfer between private industry and government labs, in this case the National Aeronautics and Space Administration (NASA). NASA Administrator Daniel Goldin is a strong proponent of this policy and has organized technology transfer or commercialization programs at each of the NASA field centers. Here at Langley Research Center, the Technology Applications Group (TAG) is responsible for facilitating the transfer of Langley developed research and technology to U.S. industry. Entering the program, I had many objectives for my summer research with TAG. Certainly, I wanted to gain a more thorough understanding of the concept of technology transfer and Langley's implementation of a system to promote it to both the Langley community and the community at large. Also, I hoped to become more familiar with Langley's research capabilities and technology inventory available to the public. More specifically, I wanted to learn about the technology transfer process at Langley. Because my mentor is a member of Materials and Manufacturing marketing sector of the Technology Transfer Team, another overriding objective for my research was to take advantage of his work and experience in materials research to learn about the Advanced Materials Research agency wide and help market these developments to private industry. Through the various projects I have been assigned to work on in TAG, I have successfully satisfied the majority of these objectives. Work on the Problem Statement Process for TAG as well as the development of the Advanced Materials Research Brochure have provided me with the opportunity to learn about the technology transfer process from the outside looking in and the inside looking out. Because TAG covers

  12. Blast Technologies

    Science.gov (United States)

    2011-06-27

    Team Leader Risa Scherer Blast Mitigation Interior and Laboratory Team Leader Blast Technologies POC’s Government Point Of Contacts (POCs): To...to yield injury assessments at higher fidelities and with higher confidence UNCLASSIFIED UNCLASSIFIED Risa Scherer Blast Mitigation Interior and

  13. Health technology

    International Nuclear Information System (INIS)

    Nicolas, Delphine; Dangleant, Caroline; Ganier, Aude; Kaczmarek, Delphine

    2008-01-01

    The CEA is an organization with a primarily technological focus, and one of the key areas in which it carries out research is Health Technology. This field of research was recognized and approved by the French Atomic Energy Committee on July 20, 2004. The expectations of both the public and health care professionals relate to demands for the highest standards of health care, at minimum risk. This implies a need to diagnose illness and disease as accurately and as at early a stage as possible, to target surgery precisely to deal only with damaged organs or tissues, to minimize the risk of side effects, allergies and hospital-acquired infections, to follow-up and, as far as possible, tailor the health delivery system to each individual's needs and his or her lifestyle. The health care sector is subject to rapid changes and embraces a vast range of scientific fields. It now requires technological developments that will serve to gather increasing quantities of useful information, analyze and integrate it to obtain a full understanding of highly complex processes and to be able to treat the human body as un-invasively as possible. All the technologies developed require assessment, especially in the hospital environment. (authors)

  14. Technology transfer

    International Nuclear Information System (INIS)

    Boury, C.

    1986-01-01

    This paper emphasizes in the specific areas of design, engineering and component production. This paper presents what Framatome has to offer in these areas and its export oriented philosophy. Then, a typical example of this technology transfer philosophy is the collaboration with the South Korean firm, Korea Heavy Industries Corporation (KHIC) for the supply of KNU 9 and KNU 10 power stations

  15. Technology Transfer

    Science.gov (United States)

    Bullock, Kimberly R.

    1995-01-01

    The development and application of new technologies in the United States has always been important to the economic well being of the country. The National Aeronautics and Space Administration (NASA) has been an important source of these new technologies for almost four decades. Recently, increasing global competition has emphasized the importance of fully utilizing federally funded technologies. Today NASA must meet its mission goals while at the same time, conduct research and development that contributes to securing US economic growth. NASA technologies must be quickly and effectively transferred into commercial products. In order to accomplish this task, NASA has formulated a new way of doing business with the private sector. Emphasis is placed on forming mutually beneficial partnerships between NASA and US industry. New standards have been set in response to the process that increase effectiveness, efficiency, and timely customer response. This summer I have identified potential markets for two NASA inventions: including the Radially Focused Eddy Current Sensor for Characterization of Flaws in Metallic Tubing and the Radiographic Moire. I have also worked to establish a cooperative program with TAG, private industry, and a university known as the TAG/Industry/Academia Program.

  16. Energy Technology.

    Science.gov (United States)

    Eaton, William W.

    Reviewed are technological problems faced in energy production including locating, recovering, developing, storing, and distributing energy in clean, convenient, economical, and environmentally satisfactory manners. The energy resources of coal, oil, natural gas, hydroelectric power, nuclear energy, solar energy, geothermal energy, winds, tides,…

  17. (Environmental technology)

    Energy Technology Data Exchange (ETDEWEB)

    Boston, H.L.

    1990-10-12

    The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

  18. Geospatial Technology

    Science.gov (United States)

    Reed, Philip A.; Ritz, John

    2004-01-01

    Geospatial technology refers to a system that is used to acquire, store, analyze, and output data in two or three dimensions. This data is referenced to the earth by some type of coordinate system, such as a map projection. Geospatial systems include thematic mapping, the Global Positioning System (GPS), remote sensing (RS), telemetry, and…

  19. A crystallographic and spectroscopic study of crystal sites in the 'spinel' structure; Etude cristallographique et spectroscopique des sites cristallins dans la structure 'spinelle'

    Energy Technology Data Exchange (ETDEWEB)

    Drifford, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-06-15

    A crystallographic study on magnesium aluminates led to the determination of crystal site average distortion. A spectroscopic study of transition elements doped spinels gave the position of the doping element in tetrahedral (A) or octahedral (B) sites, and the local distortion of the latter. The comparison of average and local parameters points to differences in the behaviour of doping elements and shows the size of (A) sites are independent of the host crystal composition while the average size of (B) sites varies with the composition. (author) [French] Une etude cristallographique des aluminates de magnesium a permis de determiner la deformation moyenne des sites cristallins. Une etude spectroscopique des aluminates de magnesium dopes avec des elements de transition a permis de localiser les dopants entre les sites tetraedriques (A) et octaedriques (B) et d'etudier la deformation locale de ces sites. La comparaison entre les parametres moyens et locaux a caracterise le comportement du dopant et montre que les dimensions des sites (A) sont independantes de la composition de la matrice, alors que les caracteristiques geometriques moyennes des sites (B) varient continument avec la composition. (auteur)

  20. Radio-vulcanization of natural rubber in the latex phase. Study of an experimental 1 tonne per hour production; Radio-vulcanisation du caoutchouc naturel en phase latex. Etude d'une production experimentale de 1 tonne par heure

    Energy Technology Data Exchange (ETDEWEB)

    Leveque, P.; Puig, J.R.; Roudeix, H. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    After briefly reviewing the main research carried out on the radio-vulcanization of latex and elastomers, a description is given of 4 types of cell which have been used successively with a view to industrial irradiation. They have made it possible to acquire the information necessary for resolving the main problem arising during irradiation - the formation of coagulum. The first two cell are designed for irradiation by a horizontal beam ('Dynamitron'), the two others use a vertical beam ('Circe'). The study of the properties of the rubber obtained shows it to compare favorably with 'Revultex'. In the appendix are given some characteristics of natural latex and information about its processing. (authors) [French] Apres un rappel des principales etudes sur la radio-vulcanisation du latex et des elastomeres, on decrit les quatre types de cellules successivement essayes en vue de l'irradiation industrielle. Ils ont permis d'acquerir les informations necessaires a la resolution du probleme principal pose par l'irradiation, la formation de coagulum au cours de celle,-ci. Les deux premiers sont concus pour l'irradiation par un faisceau horizontal ('Dynamitron'), les derniers par un faisceau vertical ('Circe'). L'etude des proprietes du caoutchouc obtenu montre qu'il se compare favorablement au 'Revultex'. Un apercu est donne en annexe des caracteristiques du latex naturel et de sa mise en oeuvre. (auteurs)

  1. Etude de la Dynamique de la Transition de Phase Ferroelectrique dans un Cristal de Potassium TANTALE(.93) NIOBIUM(.07) OXYGENE(3) a L'aide D'une Technique de Melange a Quatre Ondes Resolu dans le Temps

    Science.gov (United States)

    Grenier, Paul

    Dans ce travail, nous presentons une etude de la dynamique de la transition de phase d'un echantillon de KTa_{.93}Nb_ {.07}O_3. Cette etude est basee principalement sur la mesure des caracteristiques de la branche polaritonique, associee au mode mou, en fonction de la temperature a l'aide d'une technique de melange a quatre ondes resolu dans le temps. De ces mesures, nous deduisons les caracteristiques du mode mou en fonction de la temperature, du vecteur d'onde et de la frequence. Les resultats obtenus pour la "self-energie" du mode mou dans la region du polariton presentent deux caracteristiques importantes. Premierement, la presence d'un pic a cq/n ~eq 1100 cm^{ -1} que nous interpretons comme etant du a une interaction anharmonique a quatre corps. Deuxiemement, la partie imaginaire de la "self-energie" s'avere etre plus elevee d'un facteur de l'ordre de deux que la valeur obtenue en diffusion Raman. L'interpretation la plus plausible relie cette difference a la presence de domaines ferroelectriques. De plus, l'evolution en temperature des tenseurs Raman et electro-optique, associee au mode mou, montre la predominance de ce dernier pres de T_{c}. Ces differents resultats abondent dans le sens d'un modele microscopique ou se sont les interactions electromagnetiques inter-i lots qui importent pour la dynamique des transitions de phase ferroelectrique dans ces systemes.

  2. Development of an analogue multiplexed regulation for periodic 1. order delayed processes; Etude et realisation d'une regulation analogique multiplexee pour processus aperiodiques du 1. ordre avec retard pur

    Energy Technology Data Exchange (ETDEWEB)

    Amblard, J.C. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-07-15

    The present note deals with the study regulations of the sampled type, for 1. order process with simple delay. In order to obtain a good stability in such regulations, together with acceptable performances, it is interesting to use polynomial type correctors acting directly on the sampled error signals. The active elements of these correctors can be shared by all the channels to be controlled. Furthermore, the determination of the correction parameters results from an optimal study of the system. In the second part is described the construction of a multiplexed regulation for diffusion ovens. (author) [French] La presente note concerne l'etude des regulations de type echantillonne, pour processus du 1. ordre avec retard pur. Pour obtenir une bonne stabilite de telles regulations, ainsi que des performances correcte il est interessant d'utiliser des correcteurs de type polynomial, agissant directement sur les signaux d'erreur echantillonnes. Les elements actifs de ces correcteurs peuvent etre pris communs a toutes les voies a controler. D'autre part, la determination des parametres de correction decoula d'une etude optimale du systeme. Dans une seconde partie on decrit la realisation d'une regulation multiplexee de fours a diffusion. (auteur)

  3. Photovoltaic technologies

    International Nuclear Information System (INIS)

    Bagnall, Darren M.; Boreland, Matt

    2008-01-01

    Photovoltaics is already a billion dollar industry. It is experiencing rapid growth as concerns over fuel supplies and carbon emissions mean that governments and individuals are increasingly prepared to ignore its current high costs. It will become truly mainstream when its costs are comparable to other energy sources. At the moment, it is around four times too expensive for competitive commercial production. Three generations of photovoltaics have been envisaged that will take solar power into the mainstream. Currently, photovoltaic production is 90% first-generation and is based on silicon wafers. These devices are reliable and durable, but half of the cost is the silicon wafer and efficiencies are limited to around 20%. A second generation of solar cells would use cheap semiconductor thin films deposited on low-cost substrates to produce devices of slightly lower efficiency. A number of thin-film device technologies account for around 5-6% of the current market. As second-generation technology reduces the cost of active material, the substrate will eventually be the cost limit and higher efficiency will be needed to maintain the cost-reduction trend. Third-generation devices will use new technologies to produce high-efficiency devices. Advances in nanotechnology, photonics, optical metamaterials, plasmonics and semiconducting polymer sciences offer the prospect of cost-competitive photovoltaics. It is reasonable to expect that cost reductions, a move to second-generation technologies and the implementation of new technologies and third-generation concepts can lead to fully cost-competitive solar energy in 10-15 years. (author)

  4. Technology Programme

    International Nuclear Information System (INIS)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo

    2005-01-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  5. Technology Programme

    Energy Technology Data Exchange (ETDEWEB)

    Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo (ed.)

    2005-07-01

    The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

  6. Technological Networks

    Science.gov (United States)

    Mitra, Bivas

    The study of networks in the form of mathematical graph theory is one of the fundamental pillars of discrete mathematics. However, recent years have witnessed a substantial new movement in network research. The focus of the research is shifting away from the analysis of small graphs and the properties of individual vertices or edges to consideration of statistical properties of large scale networks. This new approach has been driven largely by the availability of technological networks like the Internet [12], World Wide Web network [2], etc. that allow us to gather and analyze data on a scale far larger than previously possible. At the same time, technological networks have evolved as a socio-technological system, as the concepts of social systems that are based on self-organization theory have become unified in technological networks [13]. In today’s society, we have a simple and universal access to great amounts of information and services. These information services are based upon the infrastructure of the Internet and the World Wide Web. The Internet is the system composed of ‘computers’ connected by cables or some other form of physical connections. Over this physical network, it is possible to exchange e-mails, transfer files, etc. On the other hand, the World Wide Web (commonly shortened to the Web) is a system of interlinked hypertext documents accessed via the Internet where nodes represent web pages and links represent hyperlinks between the pages. Peer-to-peer (P2P) networks [26] also have recently become a popular medium through which huge amounts of data can be shared. P2P file sharing systems, where files are searched and downloaded among peers without the help of central servers, have emerged as a major component of Internet traffic. An important advantage in P2P networks is that all clients provide resources, including bandwidth, storage space, and computing power. In this chapter, we discuss these technological networks in detail. The review

  7. Innovative Technology in Automotive Technology

    Science.gov (United States)

    Gardner, John

    2007-01-01

    Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

  8. Playful Technology

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Eriksson, Eva

    2013-01-01

    In this paper, the design of future services for children in Danish public libraries is discussed, in the light of new challenges and opportunities in relation to new media and technologies. The Danish government has over the last few years initiated and described a range of initiatives regarding...... the future of public libraries, especially in relation to children as a particular user group. This paper explores play culture, and takes a stance especially in the project ‘Families at play in the library’, but also in experiences from related projects. The focus is on families playing together...... in the library, the changing role of the librarians and the library space. We argue that intertwining traditional library services with new media forms and engaging play is the core challenge for future design in physical public libraries, but also that it is through new media and technology that new...

  9. Technology transfer

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Illustrated by the example of the FRG's nuclear energy exports, it is shown that the nuclear technology transfer leads to new dimensions of intergovernmental relations, which hold within themselves on account of multiple state-to-state, scientific, industrial and - last but not least - personal contacts the chance of far-reaching friendships between countries and people. If the chance is taken, this can also be seen as an important contribution towards maintaining the peace. (orig.) [de

  10. Group technology

    International Nuclear Information System (INIS)

    Rome, C.P.

    1976-01-01

    Group Technology has been conceptually applied to the manufacture of batch-lots of 554 machined electromechanical parts which now require 79 different types of metal-removal tools. The products have been grouped into 7 distinct families which require from 8 to 22 machines in each machine-cell. Throughput time can be significantly reduced and savings can be realized from tooling, direct-labor, and indirect-labor costs

  11. Army Technology

    Science.gov (United States)

    2015-02-01

    MUTT ) is a semi-autonomous robotic follower that lightens the load for Soldiers by decreasing the amount of equipment they need to carry when...dismounted in the toughest of terrains. The MUTT uses advanced, proven commercial technology that has been adapted for the rigors of the battlefield...With ultra-quiet electric motors, the MUTT gives Soldiers unmatched internal transportability options and expeditionary power that includes hands- free

  12. ADSL Technology

    Directory of Open Access Journals (Sweden)

    Slavko Šarić

    2002-11-01

    Full Text Available The paper deals with the ADSL (Asymmetric Digital SubscriberLine technology- the asymmetric digital telecommunicationtechnology. It is characterised by high-speed transmissionof data and simultaneous transmission of information regardingthe throughput capacity of the telephone network. Thisresults in better efficiency of transmission, and higher utilisationof the bandwidth. Due to its advantages, the use of ADSLtechnology is increasing daily, especially by ente1prises in Europeand worldwide.

  13. Nuclear technology

    International Nuclear Information System (INIS)

    1983-03-01

    This report examines nuclear technology in Canada, with emphasis on Quebec, as a means of revitilizing industry. The historical, present day, and future states of Atomic Energy of Canada Limited are examined. Future research programs are discussed in greatest detail. These range from disposal of porcine wastes to new applications for electricity to nuclear medical techniques (to cite only a few examples). The executive summary is written in English. (23 fig., 16 tab.)

  14. Emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Shin-yee

    1993-03-01

    The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

  15. Technology Management

    DEFF Research Database (Denmark)

    Pilkington, Alan

    2014-01-01

    This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter-relationships. Spe......This paper reports a bibliometric analysis (co-citation network analysis) of 10 journals in the management of technology (MOT) field. As well as introducing various bibliometric ideas, network analysis tools identify and explore the concepts covered by the field and their inter......-relationships. Specific results from different levels of analysis show the different dimensions of technology management: • Co-word terms identify themes • Journal co-citation network: linking to other disciplines • Co-citation network show concentrations of themes The analysis shows that MOT has a bridging role...... in integrating ideas from several distinct disciplines. This suggests that management and strategy are central to MOT which essentially relates to the firm rather than policy. Similarly we have a dual focus on capabilities, but can see subtle differences in how we view these ideas, either through an inwards...

  16. Etude de nano-transistors à faible pente sous le seuil pour des applications très basse consommation

    OpenAIRE

    Villalon , Anthony

    2014-01-01

    Band to band tunneling field effect transistor (TFET) is a PIN-gated architecture able to reach sub 60mV/dec subthreshold slopes at room temperature, which is an advantage over MOSFET in low power applications. The objective of this thesis is to study and characterize TFETs fabricated in CEA-LETI using MOSFET SOI technology. The first generation of devices is realized on planar FDSOI technology, and studies the impact of source/channel heterojunction, channel thickness and annealing temperatu...

  17. Contribution to the study of the sintering of finely divided alumina; Contribution a l'etude du frittage de l'alumine finement divisee

    Energy Technology Data Exchange (ETDEWEB)

    Vergnon, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    Two crystalline forms of alumina, delta and alpha, were used to prepare compacts. The shrinkage of these compacts was investigated at different temperatures. The samples of alumina are composed of non porous, spherical particles, of a very high purity. Their mean diameter varies between 160 and 1 200 Angstrom for the delta alumina samples and between 400 and 1 200 Angstrom for the alpha alumina samples. The shrinkage of compacts, heated at a linearly increasing temperature (300 deg. C/h, slow heating) was studied in a A.D.A.M.E.L. dilatometer, modified to be used as a retractometer. The kinetics of the isothermal shrinkage of compacts after their rapid introduction (a few seconds, flash heating) in the high temperature zone of the furnace were followed with a photographic technique. It is shown that the heating rate influences the shrinkage of the compacts when they are heated at temperatures over 1 000 deg. C. The kinetics of the isothermal shrinkage, at temperature between 1000 deg. C and 1600 deg. C were thoroughly studied. Values of the apparent activation energy for the different classes of compacts are given. An interpretation of the results is proposed. It takes into account two different but interdependent mechanisms of sintering: the disappearance of porosity as a result of vacancy diffusion and the grain growth as a result of boundary migration. (author) [French] Deux formes cristallines de l'alumine, la forme delta et la forme alpha, ont ete utilisees pour confectionner des comprimes en vue d'une etude cinetique du frittage. Ces alumines d'une tres grande purete sont constituees de particules spheriques non poreuses, sensiblement homodispersees dont le diametre moyen varie entre 160 et 1200 Angstrom pour les echantillons de l'alumine delta et entre 400 et 1200 Angstrom pour ceux de l'alumine alpha. Le retrait des comprimes chauffes a temperature linerairement croissante (300 deg. C/h: chauffage lent) a ete suivi a l'aide du

  18. Synthese, etude structurale et electrochimique des materiaux d'electrode positive d'oxydes mixtes lithium cobalt nickel oxide (0 /= 1) pour les batteries rechargeables au lithium

    Science.gov (United States)

    Grincourt, Yves

    Depuis une dizaine d'annees, on observe un interet grandissant pour les batteries rechargeables au lithium de tension superieure a 4 volts. La commercialisation de ces batteries pour l'electronique grand marche tend de plus en plus a supplanter celle des accumulateurs Ni-Cd et Ni-MH, de tension nominate 1,2 V. Ces batteries au lithium font appel a des materiaux d'electrode positive (cathode a la decharge) du type oxydes mixtes de metaux de transition LiMnO 2, LiMn2O4, LiNiO2 ou LiCoO2. Si le compose LiCoO2 est relativement aise a synthetiser, il n'en demeure pas moins que le cobalt reste un metal plus couteux compare au nickel et au manganese. La synthese de LiNiO2, quart a elle, demeure un probleme du point de vue stoechiometrique. Un defaut de lithium (5 a 10% molaire) conduira a des proprietes electrochimiques mediocres de la batterie. Dans cette etude nous nous proposons donc de preparer par voie humide et par voie seche les materiaux d'electrode positive de la famille LiCoyNi1-yO2 aver (0 ≤ y ≤ 1) et d'etudier en detail l'influence du pourcentage de nickel et de cobalt sur les proprietes electrochimiques des oxydes mixtes Li-Ni-Co. Une des caracteristiques est la morphologie plus fine des poudres de materiaux, observes par microscopie electronique a balayage (MEB). Un traitement thermique a plus basse temperature (750°C) que pour LiCoO2 (850°C) ainsi qu'un leger exces de lithium dans la preparation, ont permis d'aboutir a un materiau de stoechiometrie quasi parfaite. Neanmoins, le role de pilfer joue par 2 a 4% de moles de Ni2+ presents sur les sites lithium, permet de conserver intacte la structure hexagonale de la maille entre deux cycles consecutifs. Afin de mieux comprendre l'influence du vieillissement dune demi-pile Li/LiMeO2 (Me = Ni, Co) a temperature ambiante, des etudes electrochimiques et d'impedance spectroscopique ont ete menees en parallele. Le vieillissement de la cellule s'accompagne seulement dune chute de son potentiel due a son auto

  19. E. P. R. spectroscopic study of nitroxide mono- and bi-radicals; Etude par spectroscopie de resonance paramagnetique electronique de monoradicaux et de biradicaux nitroxydes

    Energy Technology Data Exchange (ETDEWEB)

    Lemaire, H. [Commissariat a l' Energie Atomique, Grenoble, 38 (France). Centre d' Etudes Nucleaires

    1967-07-01

    experimentales d'etude de produits parfaitement bien definis au point de vue structure chimique. L'etude par resonance paramagnetique electronique de monoradicaux nitroxydes conduit a la determination des axes et des elements du tenseur d'interaction hyperfine electron-noyau d'azote et du tenseur d'anisotropie du facteur de Lande: les resultats sont relies a la structure electronique des radicaux. On interprete qualitativement l'influence du solvant sur les elements des tenseurs, ainsi que les elargissements selectifs des raies hyperfines en milieu visqueux. Dans les biradicaux nitroxydes, la structure hyperfine depend non seulement des interactions magnetiques propres a chaque monomere, mais egalement de la grandeur de l'interaction d'echange separant les etats singulet et triplet du dimere; les biradicaux etudies ici sont les premiers composes organiques pour lesquels l'influence de l'echange sur la structure hyperfine est clairement mise en evidence. La presence de deux electrons non apparies introduit egalement une interaction magnetique dipolaire electron-electron, que l'on peut mettre a profit, dans le cas d'un echange intermediaire, pour determiner le signe de l'echange en etudiant le biradical dans un cristal liquide. Ces composes presentent egalement des elargissements selectifs de transitions hyperfines lorsque la viscosite du solvant croit. La theorie utilisee pour interpreter les largeurs de raie des monoradicaux est etendue au cas des biradicaux; elle rend compte des resultats experimentaux si l'on introduit simultanement les anisotropies des facteurs de Lande et des interactions dipolaires electrons-noyaux et electron-electron, en conduisant a une autre determination du signe de l'echange. (auteur)

  20. Interleukin-6 gene polymorphisms and susceptibility to myocardial infarction: the ECTIM study. Etude Cas-Témoin de l'Infarctus du Myocarde.

    Science.gov (United States)

    Georges, J L; Loukaci, V; Poirier, O; Evans, A; Luc, G; Arveiler, D; Ruidavets, J B; Cambien, F; Tiret, L

    2001-06-01

    There is growing evidence that interleukin (IL) 6 plays an important role in the atherosclerotic process because of its role in mediating immune and inflammatory responses and inducing cell proliferation. The present study examined whether molecular variations at the IL-6 locus are involved in the predisposition to myocardial infarction. The entire coding region, 1,158 bp of the 5' flanking region and 237 bp of the 3' flanking region of the IL-6 gene were screened. We detected three nucleotide substitutions in the 5' region at positions -174 (G/C), -572 (G/C), and -596 (G/A) from the transcription start site, and one insertion/deletion in the 3' region at position +528 after the Stop codon. These polymorphisms were genotyped in the Etude Cas-Témoin de l'Infarctus du Myocarde study comparing male patients (n=640) and age-matched controls (n=719) from Northern Ireland and France. The IL-6/G-174C and IL-6/G-596A polymorphisms were in nearly complete association. Carriers of the IL-6/-174 C allele were more frequent in patients than in controls. The population-adjusted odds ratio for myocardial infarction associated with genotype CC+CG vs. GG was estimated as 1.34. In French patients the number of coronary arteries with greater than 50% stenosis was assessed by angiography. The IL-6/-174 C allele was more frequent in patients with two or fewer stenosed vessels than in patients with three-vessel lesions. These results suggest that genetic variation at the IL-6 locus is associated with susceptibility to myocardial infarction, especially events occurring on less extended lesions. These findings would be compatible with a lower IL-6 secretion associated with the IL-6/-174 C allele, itself or in combination with other promoter polymorphisms, leading to more unstable plaques.

  1. Mise au point du rheometre a cisaillement annulaire pour l'etude de rheologie d'un mastic bitumineux avec verre incorpore =

    Science.gov (United States)

    El Mansouri, Souleimane

    Dans le domaine viscoelastique lineaire (VEL, domaine des petites deformations), le comportement thermomecanique du bitume et du mastic bitumineux (melange uniforme de bitume et de fillers) a ete caracterise au Laboratoire des Chaussees et Materiaux Bitumineux (LCMB) de l'Ecole de technologie superieure (ETS) avec l'appui de nos partenaires externes : la Societe des Alcools du Quebec (SAQ) et Eco Entreprises Quebec (EEQ). Les proprietes rheologiques des bitumes et des mastics ont ete mesurees grâce a un nouvel outil d'investigation appele, Rheometre a Cisaillement Annulaire (RCA), sous differentes conditions de chargement. Cet appareil permet non seulement de solliciter des eprouvettes de tailles importantes par rapport a celles utilisees lors des essais classiques, mais aussi d'effectuer des essais en conditions quasi-homogenes, ce qui permet de donner acces a la loi de comportement des materiaux. Les essais sont realises sur une large gamme de temperatures et de frequences (de -15 °C a 45°C et de 0,03Hz a 10 Hz). Cette etude a ete menee principalement pour comparer le comportement d'un bitume avec celui d'un mastic bitumineux dans le domaine des petites deformations. neanmoins, dans une seconde perspective, on s'interesse a l'influence des fillers de verre de post-consommation sur le comportement d'un mastic a faibles niveaux de deformations en comparant l'evolution des modules complexes de cisaillements (G*) d'un mastic avec fillers de verre et un mastic avec fillers conventionnels (calcaire). Enfin, le modele analogique 2S2P1D est utilise pour simuler le comportement viscoelastique lineaire des bitumes et des mastics bitumineux testes lors de la campagne experimentale.

  2. Concerning the study of the irreversible magnetic behaviour of superconductivity; Contribution a l'etude du comportement magnetique irreversible des supraconducteurs

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, G. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-03-01

    The influence of the presence of extended lattice defects on the magnetic behaviour has been studied for the case of type I superconductors, such as Re and Ta, and in a more quantitative manner for the type II superconductor niobium. In this case, measurements of the thermal conductivity have given an estimate of the relative concentration of lattice defects in each specimen. These measurements show that the larger the number of lattice defects, the more irreversible becomes the magnetization curve, and the larger becomes the values of the critical current, which is related by a simple model to the magnetization values. Finally, a study by transmission electron microscopy has confirmed on the one hand the diversity of the extended lattice defects and on the other hand has allowed the formulation of several hypothesis on their respective influence. [French] L'influence de la presence de defauts etendus sur le comportement magnetique a ete etudie pour des supraconducteurs de premiere espece, tels que le rhenium et le tantale, et plus quantitativement pour un supraconducteur de deuxieme espece, le niobium. Dans ce cas, des mesures de conductibilite thermique ont permis d'estimer la concentration relative des defauts du reseau dans chaque echantillon. Ces mesures montrent que plus les defauts du reseau sont nombreux, plus la courbe d'aimantation est irreversible, et plus les valeurs du courant critique, reliees par un modele simple aux valeurs de l'aimantation, sont elevees. Enfin une etude par microscopie electronique en transmission - a permis d'une part de constater la diversite des defauts etendus et d'autre part de formuler quelques hypotheses sur leurs influences respectives.

  3. Preliminary studies on the closed cycle magneto aerodynamic converter; Etudes preliminaires sur les convertisseurs magnetohydrodynamiques fonctionnant hors d'equilibre thermodynamique

    Energy Technology Data Exchange (ETDEWEB)

    Ricateau, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    electron heating in argon-potassium can be achieved by magnetic fields from 1 to 2 Ts. Plans are being made to build an important facility which will work on the principle of hot shots. The gas generator will deliver cesium-seeded helium shots at a temperature of 2100 deg. K. The shot will last 1/ 10 s and the instantaneous thermal power will reach 1 MW. (author) [French] A cote des convertisseurs magnetoaerodynamiques a cycle ouvert qui transforment l'energie thermique contenue dans les gaz de combustion on etudie tres attentivement le convertisseur a cycle ferme qui peut tirer son energie de toute source de chaleur a haute temperature et tout particulierement des sources nucleaires. Avant une etude pratique de l'ensemble de la centrale les performances du convertisseur lui-meme doivent etre bien delimitees. Ces performances sont largement fonction de la conductivite du gaz utilise. Mais cette conductivite ne doit pas etre payee par une temperature techniquement inadmissible pour l'echangeur de chaleur. Dans le fluide de conversion on est amene a associer un gaz porteur, helium ou argon, et une semence facilement ionisable cesium ou potassium. L'ionisation purement thermique n'est efficace qu'a partir de 2500 deg. K, par contre le champ electrique developpe par induction dans le convertisseur peut, sous certaines conditions, accroitre la temperature electronique et developper une ionisation bien superieure a la valeur d'equilibre. Il devient alors possible d'ioniser le gaz a temperature moderee. Des travaux en cours ont pour but de preciser les conditions permettant de creer cette ionisation hors d'equilibre dans les gaz rares ensemenses. Des mesures ont ete faites a l'aide d'un plasmatron triphase do 500 kVA alimente a l'argon ensemence de potassium. On a fait debiter cet appareil dans une cellule permettant de mesurer les composantes tensorielles de la conductivite en presence de champ magnetique. Les valeurs

  4. Wearable Technology

    Science.gov (United States)

    Watson, Amanda

    2013-01-01

    Wearable technology projects, to be useful, in the future, must be seamlessly integrated with the Flight Deck of the Future (F.F). The lab contains mockups of space vehicle cockpits, habitat living quarters, and workstations equipped with novel user interfaces. The Flight Deck of the Future is one element of the Integrated Power, Avionics, and Software (IPAS) facility, which, to a large extent, manages the F.F network and data systems. To date, integration with the Flight Deck of the Future has been limited by a lack of tools and understanding of the Flight Deck of the Future data handling systems. To remedy this problem it will be necessary to learn how data is managed in the Flight Deck of the Future and to develop tools or interfaces that enable easy integration of WEAR Lab and EV3 products into the Flight Deck of the Future mockups. This capability is critical to future prototype integration, evaluation, and demonstration. This will provide the ability for WEAR Lab products, EV3 human interface prototypes, and technologies from other JSC organizations to be evaluated and tested while in the Flight Deck of the Future. All WEAR Lab products must be integrated with the interface that will connect them to the Flight Deck of the Future. The WEAR Lab products will primarily be programmed in Arduino. Arduino will be used for the development of wearable controls and a tactile communication garment. Arduino will also be used in creating wearable methane detection and warning system.

  5. Understanding Technology?

    Directory of Open Access Journals (Sweden)

    Erik Bendtsen

    2016-11-01

    Full Text Available We are facing radical changes in our ways of living in the nearest future. Not necessarily of our own choice, but because tchnological development is moving so fast, that it will have still greater impact on many aspects of our lives. We have seen the beginnings of that change within the latest 35 years or so, but according to newest research that change will speed up immensely in the nearest years to come. The impact of that change or these changes will affect our working life immensely as a consequence of automation. How these changes are brought about and which are their consequences in a broad sense is being attempted to be understood and guessed by researchers. No one knows for sure, but specific patterns are visible. This paper will not try to guess, what will come, but will rather try to understand the deepest ”nature” of technology in order to understand the driving factors in this development: the genesis of technology in a broad sense in order to contibute to the understanding of the basis for the expected development.

  6. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

  7. Study of the machining of uranium carbide rods obtained by continuous casting under electronic bombardment; Etude de l'usinage de barreaux de carbure d'uranium obtenus par coulee continue sous bombardement electronique

    Energy Technology Data Exchange (ETDEWEB)

    Rousset, P.; Accary, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    The authors consider the various methods of machining uranium mono-carbide and compare them critically in the case of their application to uranium carbide obtained by fusion under an electronic bombardment and continuous casting. This study leads them to propose two mechanical machining methods: cylindrical rectification and center-less rectification, preceded by a preliminary roughing out of a cylinder, the latter appearing more suitable. A study of the machining yields as a function of the diameter of the rough bars and of the diameter of the finished rods has shown that an optimum value of the rough bar diameter exists for each value of the finished rod diameter. It is found that the yield increases as the diameter itself increases, this yield rising from 45 per cent to around 70 per cent as the diameter of the rough bars increases from 25-26 mm to 37-38 mm. (authors) [French] Les auteurs envisagent les differentes methodes d'usinage du monocarbure d'uranium et se livrent a une etude critique de celles-ci, dans le cas de leur application a l'usinage de barreaux de carbure d'uranium obtenus par fusion sous bombardement electronique et coulee continue. Cette etude les conduit a proposer deux methodes d'usinage mecanique: la rectification cylindrique et la rectification 'centerless', precedee d'un ebauchage par carottage, la seconde paraissant la plus appropriee. L'etude des rendements d'usinage en fonction du diametre des barreaux bruts et du diametre des barreaux finis, a mis en evidence une valeur optimale du diametre des barreaux bruts pour chaque valeur du diametre des barreaux usines. Elle a montre que le rendement croit lorsque le diametre croit lui-meme, ce rendement passant d'environ 45 pour cent a environ 70 pour cent, lorsque le diametre des barreaux bruts passe de 25-26 mm a 37-38 mm.

  8. Architectural Technology and Technological Planning

    Directory of Open Access Journals (Sweden)

    Giorgio Giallocosta

    2011-11-01

    Full Text Available At least three fundamental aspects of the many singular technological approaches to architectural planning are currently evolving significantly and are ripe for potential development. The first relates to enhanced opportunities for defining the ex-ante characteristics and performance of building products and components, but particularly concerns potential leadership assumptions in planning and the ‘reification’ of architecture through ‘collective’ behaviours. The second relates to the tendency to try and overcome the connotation of architectural projects, inclusive of their entire life cycle. The third relates to current evolutionary developments (either potential or simply implicit in performance approach.

  9. Technology round and management of technology

    International Nuclear Information System (INIS)

    Park, Yong Tae

    1994-04-01

    This book deals with beginning of technology round with background of it, change of scientific technique paradigm with economy, management and policy, change of international political environment globalization of technical and economic environment, formation of strategic alliance, intensifying regionalism, new GATT system, UR and technology round, new international technique regulation and technology round of OECD, feature and meaning of technology round, assignment and scientific technique of Korea, past and present of scientific technology in Korea, correspondence for technology round.

  10. Incineration technologies

    CERN Document Server

    Buekens, Alfons

    2013-01-01

    Waste incineration is the art of completely combusting waste, while maintaining or reducing emission levels below current emission standards. Where possible, objectives include the recovering of energy as well as the  combustion residues.  Successful waste incineration makes it possible to achieve a deep reduction in waste volume, obtain a compact and sterile residue, and eliminate a wide array of pollutants. This book places waste incineration within the wider context of waste management, and demonstrates that, in contrast to landfills and composting, waste incineration can eliminate objectionable and hazardous properties such as flammability and toxicity, result in a significant reduction in volume, and destroy gaseous and liquid waste streams leaving little or no residues beyond those linked to flue gas neutralization and treatment. Moreover, waste incineration sterilizes and destroys putrescible matter, and produces usable heat.  Incineration Technologies first appeared as a peer-reviewed contribution ...

  11. Robot technology

    International Nuclear Information System (INIS)

    Vertut, Jean; Coiffet, Philippe.

    1985-01-01

    Teleoperation is concerned with the exploration and exploitation of of spaces which do not allow, because of their inaccessibility or hostility, direct access to man. This volume (Parts 2, 3 and 4) covers the contribution of computer science and automatic control to this technology. Part 2 includes a description of teleoperation systems followed by chapters on the operator substitution function by computer feedback to the operator. Part 3 has chapters on performance evaluation of teleoperation systems and the human operator in the teleoperation system. Part 4 is about applications of teleoperation in the nuclear industry, underwater, in space, in medicine, in industry and in security and civil protection. The nuclear applications include research and pilot facilities, reactor operation and maintenance, reactor decommissioning and dismantling and in emergencies, for example following a reactor accident. (U.K.)

  12. Lander Technologies

    Science.gov (United States)

    Chavers, Greg

    2015-01-01

    Since 2006 NASA has been formulating robotic missions to the lunar surface through programs and projects like the Robotic Lunar Exploration Program, Lunar Precursor Robotic Program, and International Lunar Network. All of these were led by NASA Marshall Space Flight Center (MSFC). Due to funding shortfalls, the lunar missions associated with these efforts, the designs, were not completed. From 2010 to 2013, the Robotic Lunar Lander Development Activity was funded by the Science Mission Directorate (SMD) to develop technologies that would enable and enhance robotic lunar surface missions at lower costs. In 2013, a requirements-driven, low-cost robotic lunar lander concept was developed for the Resource Prospector Mission. Beginning in 2014, The Advanced Exploration Systems funded the lander team and established the MSFC, Johnson Space Center, Applied Physics Laboratory, and the Jet Propulsion Laboratory team with MSFC leading the project. The lander concept to place a 300-kg rover on the lunar surface has been described in the New Technology Report Case Number MFS-33238-1. A low-cost lander concept for placing a robotic payload on the lunar surface is shown in figures 1 and 2. The NASA lander team has developed several lander concepts using common hardware and software to allow the lander to be configured for a specific mission need. In addition, the team began to transition lander expertise to United States (U.S.) industry to encourage the commercialization of space, specifically the lunar surface. The Lunar Cargo Transportation and Landing by Soft Touchdown (CATALYST) initiative was started and the NASA lander team listed above is partnering with three competitively selected U.S. companies (Astrobotic, Masten Space Systems, and Moon Express) to develop, test, and operate their lunar landers.

  13. Powder technology

    International Nuclear Information System (INIS)

    Agueda, Horacio

    1989-01-01

    Powder technology is experiencing nowadays a great development and has broad application in different fields: nuclear energy, medicine, new energy sources, industrial and home artifacts, etc. Ceramic materials are of daily use as tableware and also in the building industry (bricks, tiles, etc.). However, in machine construction its utilization is not so common. The same happens with metals: powder metallurgy is employed less than traditional metal forming techniques. Both cases deal with powder technology and the forming techniques as far as the final consolidation through sintering processes are very similar. There are many different methods and techniques in the forming stage: cold-pressing, slip casting, injection molding, extrusion molding, isostatic pressing, hot-pressing (which involves also the final consolidation step), etc. This variety allows to obtain almost any desired form no matter how complex it could be. Some applications are very specific as in the case of UO 2 pellets (used as nuclear fuels) but with the same technique and other materials, it is possible to manufacture a great number of different products. This work shows the characteristics and behaviour of two magnetic ceramic materials (ferrites) fabricated in the laboratory of the Applied Research Division of the Bariloche Atomic Center for different purposes. Other materials and products made with the same method are also mentioned. Likewise, densities and shrinkage obtained by different methods of forming (cold-pressing, injection molding, slip casting and extrusion molding) using high-purity alumina (99.5% Al 2 O 3 ). Finally, different applications of such methods are given. (Author) [es

  14. Etude du courant inversé des photodiodes PIN des composés III-V ...

    African Journals Online (AJOL)

    Mots clés : Semi-conducteurs, photodiodes, courant inverse-dopage. Technological applications carry out that materials are very useful, so their studies are essential such as their characteristics (electrical, optical, mechanical, and thermal). The I-V characteristics were studied for photodiodes of III-V compound in reverse ...

  15. Chromosomes and irradiation: in vitro study of the action of X-rays on human lymphocytes; Chromosomes et radiations: etude in vitro de l'action des rayons X sur les lymphocytes humains

    Energy Technology Data Exchange (ETDEWEB)

    Mouriquand, C.; Patet, J.; Gilly, C.; Wolff, C

    1966-07-01

    Radioinduced chromosomal aberrations were studied in vitro on leukocytes of human peripheral blood after x irradiation at 25, 50, 100, 200, and 300 R. The numeric and structural anomalies were examined on 600 karyotypes. The relationship between these disorders and the dose delivered to the blood are discussed. An explanation on their mechanism of formation is tentatively given. (authors) [French] L'etude in vitro des anomalies chromosomiques radioinduites a ete pratiquee sur des leucocytes de sang peripherique preleve chez 4 sujets et irradie aux doses de 25, 50, 100, 200, 300 R. Les aberrations numeriques et structurales ont ete examinees sur 600 caryotypes. Les rapports entre ces anomalies et les doses appliquees sont etudies. Une hypothese sur leur mecanisme de formation est avancee. (auteurs)

  16. Contribution to the study of plasmatic fibrinogen and serum albumin: effects of irradiation; Contribution a l'etude du fibrinogene et de la serum-albumine plasmatiques - effets de l'irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Suscillon, M. [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Grenoble, 38 (France)

    1967-07-01

    The author studies the modifications of properties and structure of serum albumin and fibrinogen solution when subjected to radiation of low energy (X rays). On the other hand, two original techniques are exposed: 1. Amperometric determination of fibrin stabilizing factor or factor XIII of hemostasis. 2. Spectrophotometric study of fibrin formation kinetics. Then showing off and quantitative determination of platelets fibrinogen is exposed. (author) [French] L'auteur etudie les modifications des proprietes et de la structure des molecules de serum-albumine et de fibrinogene en solution soumise a un flux de RX de basse energie. D'autre part deux techniques originales sont exposees : 1. Dosage amperometrique du facteur stabilisant de la fibrine. 2. Etude spectrophotometrique de la cinetique de la fibro-formation. Enfin une mise en evidence et un dosage du fibrinogene plaquettaire sont presentes. (auteur)

  17. Study of the age of uranium-containing mineral deposits in the Limouzat, the bois-noir mountains (12963); Etude des ages des mineralisations uraniferes du gisement du Limouzat, Massif des bois-noirs (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Durand, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The present work is concerned with 7 different samples taken at various levels in the Limouzat mine in the Bois-Noirs mountains. It has been possible to show that the uranium dates from 265 M.Y. and that a rearrangement occurred 65 M.Y. ago. A {gamma}-spectrometer study which was originally intended to show the existence of the lack of balance in the radon circulation, has made it possible to show that the {gamma} spectra recorded on various samples could be erroneous. We observed in effect that the presence of lead, iron, etc., had a strong influence on the {gamma} spectrum of the radium family, whereas all research workers have considered that concentrations in the uranium ore were negligible and had no significant effect on the study of the {gamma} spectra of the samples. It is obvious that an interesting study has to be undertaken on the screen effects of the different cations existing in the ores. We believe that it is possible to show the presence of certain elements directly by {gamma}-spectrometry. The ages measured with the mass spectrometer present two types of disagreement but these have been explained by considering that there occurred a first arrival of lead followed by a rearrangement and, at certain points, a second arrival at this date. Finally, the deposit studied undergoes a circulation of uranium and of radon. (author) [French] La presente etude a porte sur 7 prelevements differents effectues a divers niveaux de la mine du Limouzat, massif des Bois-Noirs. Elle a permis de mettre en evidence une premiere venue d'uranium il y a 265 M.A., suivie d'un remaniements il y a 65 M.A. Une etude au spectrometre {gamma} destinee, a l'origine, a prouver les desequilibres dus aux circulations de radon a permis de montrer que les spectres {gamma} enregistres sur divers echantillons pouvaient etre entaches d'erreurs. Nous nous sommes apercus en effet que la presence de plomb, de fer..., avait une forte influence sur le spectre {gamma} de la

  18. Technology programme

    International Nuclear Information System (INIS)

    2007-01-01

    The technology activities carried out by the EURATOM-ENEA Association concern the continuation of the European Fusion Development Agreement (EFDA) as well as the ITER activities coordinated by the ITER International Office and Fusion for Energy. Also included in the activities are design and RD under the Broader Approach Agreement between the EU and Japan. In order to better contribute to the programme a number of consortium agreements among the Associations are being signed. Collaboration with industries in view of their participation in the construction of ITER was further strengthened, mainly in the field of magnet and divertor components. The new European Test Blanket Facility at ENEA Brasimone was completed; the design of the ITER radial neutron camera was optimised and the performance achievable with the in-vessel viewing system was further assessed by experimental trials. Design activities for the JT-60SA magnet and power supply system as well as the design and experimental activities related to the target of the International Fusion Materials Irradiation Facility were continued. Significant work was done to define quality assurance for neutronics analyses. Mockups of the ITER pre-compression ring made in glass fibre epoxy were tested. The activities and results documented in the following illustrate ENEA's efforts to support fusion development

  19. How Technology Teachers Understand Technological Knowledge

    Science.gov (United States)

    Norström, Per

    2014-01-01

    Swedish technology teachers' views of technological knowledge are examined through a written survey and a series of interviews. The study indicates that technology teachers' understandings of what constitutes technological knowledge and how it is justified vary considerably. The philosophical discussions on the topic are unknown to them. This lack…

  20. International technology transfer

    International Nuclear Information System (INIS)

    Kwon, Won Gi

    1991-11-01

    This book introduces technology progress and economic growth, theoretical consideration of technology transfer, policy and mechanism on technology transfer of a developed country and a developing country, reality of international technology transfer technology transfer and industrial structure in Asia and the pacific region, technology transfer in Russia, China and Eastern Europe, cooperation of science and technology for development of Northeast Asia and strategy of technology transfer of Korea.

  1. Etude des mécanismes d'interopérabilité des systèmes d'information ...

    African Journals Online (AJOL)

    Aujourd'hui, les architectures orientées services et les services Web sont importants et nécessaires pour le développement des systèmes d'information interopérables. Cependant, ces technologies ne permettent pas de prendre en charge l'aspect sémantique. Dans cet article, nous présentons d'abord une classification et ...

  2. ETUDE ET CONCEPTION D'UN DISPOSITIF DE REFRIGERATION MAGNETIQUE BASE SUR L'EFFET MAGNETOCALORIQUE GEANT

    OpenAIRE

    Allab, Farid

    2008-01-01

    The various environmental agreements prohibit the use of usual refrigerants (protocol of Montreal: FC and HCFC and protocol of Kyoto: HFC). It is thus relevant to carry out, in parallel to the current work on the new refrigerating fluids, a research of new solutions of refrigeration ensuring high energy effectiveness and a weak environmental impact. The magnetic refrigeration constitutes one of the solutions. This technology is based on the magnetocaloric effect (MCE), an intrinsic property o...

  3. X-spectrographic method for plutonium detection. Application to contamination measurements in humans; Etude d'une methode de detection du plutonium par spectrographie X. Application a la mesure des contaminations sur l'homme

    Energy Technology Data Exchange (ETDEWEB)

    Michel Trouble [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    After reviewing the radio-toxicology of plutonium 239 and conventional detection methods using its {alpha}-radiation, the author considers the measurement of the X emission spectrum of plutonium 239 using a proportional counter filled with argon under pressure. This preliminary work leads to the third part of this research involving the detailed study of the possibilities of applying thin alkali halide crystal scintillators to the detection of soft plutonium X-rays; there follows a systematic study of all the parameters liable to render the detection as sensitive as possible: movement due to the photomultiplier itself and its accessory electronic equipment, nature and size of the crystal scintillator as well as its mode of preparation, shielding against external parasitic radiation. Examples of some applications to the measurement of contamination in humans give an idea of the sensitivity of this method. (author) [French] Apres un apercu de la radiotoxicologie du plutonium 239 et des methodes classiques de detection par son rayonnement {alpha}, on etudie le spectre d'emission X du plutonium 239 avec un compteur proportionnel rempli avec de l'argon sous pression. Ce travail preliminaire permet d'aborder la troisieme partie de cette etude dans laquelle nous examinons d'une fagon approfondie les possibilites d'application des cristaux scintillateurs minces d'halogenure alcalin a la detection du rayonnement X mou du plutonium; suit une etude systematique de tous les parametres susceptibles de rendre la detection aussi sensible que possible: mouvement propre du photomultiplicateur et de l'electronique associee, nature et dimensions du cristal scintillateur ainsi que son mode de fabrication, blindage contre les rayonnements parasites exterieurs. Quelques applications a la mesure des contaminations sur l'homme permettent d'apprecier la sensibilite de cette methode. (auteur)

  4. Technological capabilities, technological dynamism and innovation offshoring

    OpenAIRE

    Schubert, Torben; Baier, Elisabeth; Rammer, Christian

    2016-01-01

    In this paper we analyze the conditions under which firms decide to offshore innovation. We consider the role of internal technological capabilities and technological dynamism in the firm environment, distinguishing speed and uncertainty of technological change. Using unique data from the German Innovation Survey we find that while high speed of technological change tends to drive innovation offshoring, high uncertainty about future technology developments results in more innovation offsho...

  5. Flywheel Technology

    Science.gov (United States)

    Ritchie, Lisa M.

    2004-01-01

    Throughout the summer of 2004, I am working on a number of different projects. While located in the Space Power and Propulsion Test Engineering branch, my main area of study is flywheel technology. I have been exposed to flywheels, their components, and their uses in today's society. I have been able to experience numerous flywheels here in the flywheel lab at NASA Glenn. My first main project was to explore the attributes and physical characteristics of a flywheel. Our branch was constructing a flywheel demonstration to be presented at the public open house taking place in June. Our Flywheel Interactive Demo, or FIDO, represents a real life multi-flywheel system here at NASA. I was given the opportunity to learn about how these flywheels store energy and are able to position a satellite. With all of this new knowledge, I was able to create the posters that explained how our demonstration worked. I also composed a step-by-step process made up of four experiments that any visitor could follow and perform on FIDO. By stepping through these experiments, the individual learns how a flywheel works. They not only read the explanation of what is happening, but they are also able to see it happen. Creating these two posters not only taught me, but also helped teach the general public during the open house, how flywheel technology is a very important part of our future. Through my research, I have learned that flywheels are able to store massive amounts of energy. They can be described as an electro-mechanical battery that stores kinetic energy while rotating. The faster it rotates, the more energy it stores. Their lifetime is about triple that of an ordinary battery. Flywheels also have the ability to combine energy storage with attitude control all in a single system. Attitude control is the ability to position a satellite as required. FIDO helps us to understand the rotational force (torque) that is applied upon a turn-table or satellite during wheel acceleration

  6. Data processing in gamma spectrometry. Application to the decay schemes study; Traitement des informations en spectrometrie gamma application a l'etude de schemas de desintegration

    Energy Technology Data Exchange (ETDEWEB)

    Boulanger, J.P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires, departement d' electronique generale, service d' instrumentation nucleaire

    1968-06-01

    The purpose of this thesis is the processing of the data issued from a gamma spectrometer, and its applications to the decay schemes study. The mathematical analysis of the full energy peaks, in connection with the very good resolution of semi-conductor detectors, leads to a very accurate determination of the energies. The resolution of complex spectra by the least squares method, completed by a spectra generating process, allows the calculation of branching ratios. Then, the handling of the two dimensional experiments permits the coincidence exam. For each of these methods, the calculation principle, then the systematics tests realized in order to prove their validity and to determine their application ranges as well as some experimental results appropriate to illustrate their possibilities, are presented. The energies of some nuclides, frequently used as standards have been thus measured and the decay schemes of {sup 134}Cs and {sup 110m}Ag determined precisely. (author) [French] Cette these est consacree aux methodes de traitement des informations issues d'un spectrometre {gamma}, et a leur application a l'etude des schemas de desintegration: l'analyse mathematique des pics d'absorption totale, conjuguee avec l'excellent pouvoir de resolution des detecteurs semi-conducteurs, conduit a une determination tres precise des energies. La decomposition des spectres complexes par la methode des moindres carres, completee par un procede de generation de spectres, autorise le calcul des rapports de branchement. Enfin le depouillement des experiences biparametriques permet l'examen des coincidences. Pour chacune de ces methodes, on expose le principe des calculs et les essais systematiques effectues afin d'eprouver leur validite et de definir leurs domaines d'application, ainsi que quelques resultats experimentaux propres a illustrer leurs possibilites. Les energies de quelques isotopes utilises couramment comme etalons ont ainsi ete

  7. Study of various processes for marking sediments with gold-198; Etude de divers procedes de marquages de sediments par l'or 198

    Energy Technology Data Exchange (ETDEWEB)

    Jeanneau, B. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-12-15

    The use of radioactive isotopes for the study of sediment deposits is based mainly on two methods: marking in the mass - a glass of an element which can be activated replaces the sediment; surface marking - a physico-chemical process is used to deposit a radio-element at the surface of the sediment. The second process is used in particular for sands when it is advantageous to have a large number of particles for statistical analysis. The aim of this work was to develop a rapid and simple method of marking which could be applied on the actual site of the experiment where equipment, may be limited. The method recommended for marking sand with gold-198 is a combination of the Petersen (treatment with tin chloride) and Campbell (treatment with silver) methods combined with prior treatments with nitric acid and caustic soda. Using this method it is possible to deposit 125 mg of gold per kilo of sediment with a yield of 95 per cent (i.e. 10 Ci/kg) using a hydrochloric acid solution containing gold. The problem of the solidity of the deposits, of their value and of their reproducibility is discussed from the point of view of the mineral constitution of the sand. (author) [French] L'utilisation d'isotopes radioactifs pour l'etude des deplacements sedimentaires fait, principalement appel a deux methodes: le marquage massique - un verre contenant un element activable remplace le sediment; le marquage superficiel - un traitement physico-chimique permet de deposer un radioelement a la surface du sediment. Le second procede est surtout employe pour les sables lorsqu'il est utile de disposer d'un grand nombre de grains pour des raisons statistiques. Le but de ce travail etait de mettre au point une methode simple et rapide de marquage pouvant etre appliquee sur le site meme de l'experience pour les utilisateurs disposant d'un equipement limite. Le procede preconise pour le marquage des sables par l'or 198 est une combinaison des methodes

  8. Etude des transistors MOSFET à barrière Schottky, à canal Silicium et Germanium sur couches minces

    OpenAIRE

    Hutin , Louis

    2010-01-01

    Until the early 2000’s Dennard’s scaling rules at the transistor level have enabled to achieve a performance gain while still preserving the basic structure of the MOSFET building block from one generation to the next. However, this conservative approach has already reached its limits as shown by the introduction of channel stressors for the sub-130 nm technological nodes, and later high-k/metal gate stacks for the sub-65 nm nodes. Despite the introduction of high-k gate dielectrics, constrai...

  9. Etude de l'efficacité diphasique d'une pompe pour la compression du CO2

    OpenAIRE

    Mohamed , El Mifdol

    2012-01-01

    IFPEN (French Institute of Petroleum and New Energy) develops, since the 80's, a type of multiphase axial rotodynamic pump for the transport of crude oil and natural gas in a single pipeline. This is now a well established technology used by many companies. Now, IFPEN wishes to extend the scope of these so-called "Poséidon" multiphase pumps to the CO2 compression aiming at an injection in the deep saline aquifers or in the depleted oil and gas reservoirs. Like all pumps and compressors, these...

  10. Les activités de conservation des lémuriens par le Groupe d’Etude et de Recherche sur les Primates de Madagascar (GERP Conservation activities of lemurs by the Madagascar Primate Research Group (GERP- Groupe d’Etude et de Recherche sur les Primates de Madagascar

    Directory of Open Access Journals (Sweden)

    Rose Marie Randrianarison

    2011-10-01

    Full Text Available Le Groupe d’Etude et de Recherche sur les Primates de Madagascar, une association de conservation, a été créée en 1994 grâce à l’initiative des Enseignants Chercheurs et étudiants du Département de Paléontologie et d’Anthropologie Biologique et du Département de Biologie Animale de l’Université d’Antananarivo. Le GERP regroupe actuellement des membres scientifiques multidisciplinaires Malgaches et étrangers dont la majorité d’entre eux est constituée par des primatologues. Les principales actions du GERP se focalisent sur les travaux de recherche sur les Primates Prosimiens de Madagascar, l’établissement de leur plan de conservation, la découverte de nouvelles espèces de lémuriens, la translocation et le transfert des lémuriens vivant dans des milieux défrichés ou précaires, le suivi et l’abondance des lémuriens ainsi que la révision de leurs aires de distribution. Les résultats des recherches effectuées sur la conservation ont permis de publier des articles dans des revues de renommée nationale et internationale sur la Primatologie. En outre, le renforcement de capacité et l’éducation de la communauté de base, des systèmes éducatifs primaires et supérieurs sur la conservation des lémuriens et l’appui aux activités de développement durable de la population locale s’avèrent nécessaires pour que la conservation des lémuriens soit pérenne.The Madagascar Primate Research Group (GERP - Groupe d’Etude et de Recherche sur les Primates de Madagascar is a conservation-focused association created in 1994 by the initiative of researcher lecturers and students from the Department of Paleontology and Biological Anthropology and the Department of Animal Biology of the University of Antananarivo. The GERP membership consists of multidisciplinary scientists, both Malagasy and foreign, the majority of whom are primatologists. The principle actions of the association are focused on research on the

  11. Marketing technologically advanced products

    OpenAIRE

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are derived from technological innovation. The aim in marketing technology-based products is an improved understanding of how an organization can combine a technology orientation with a customer value t...

  12. Comparison of Dietary Intakes Between a Large Online Cohort Study (Etude NutriNet-Santé) and a Nationally Representative Cross-Sectional Study (Etude Nationale Nutrition Santé) in France: Addressing the Issue of Generalizability in E-Epidemiology.

    Science.gov (United States)

    Andreeva, Valentina A; Deschamps, Valérie; Salanave, Benoît; Castetbon, Katia; Verdot, Charlotte; Kesse-Guyot, Emmanuelle; Hercberg, Serge

    2016-11-01

    Despite some advantages over traditional methods, Web-based studies elicit concerns about generalizability. To address this issue, we compared dietary intakes between an electronic (e-) cohort study and a nationally representative survey. We studied 49,443 French volunteers aged 18-74 years recruited during 2009-2010 in the NutriNet-Santé Study, a general population-based e-cohort study. The Etude Nationale Nutrition Santé (ENNS; 2006-2007), a cross-sectional study with a nationally representative sample of 2,754 French adults aged 18-74 years, served as the reference data set. Reported dietary intakes from three 24-hour dietary records were weighted and compared between the two studies via Student t tests for mean location, using a >5% cutoff for establishing practically meaningful differences. We observed similar intakes as regards carbohydrates, total lipids, protein, and total energy. However, intakes of fruit and vegetables, fiber, vitamins B 6 , B 9 , C, D, and E, iron, and magnesium were higher in the e-cohort than in the ENNS, while intakes of alcohol and nonalcoholic beverages were lower in the e-cohort. Significant sex-specific differences were observed regarding vitamins A and B 12 , zinc, and potassium. True intake differences, mode effects, and volunteer bias might each contribute to explaining the findings. In the future, repeated use of the same tool in large e-cohorts with heterogeneous dietary exposures could serve research purposes and supplement group-level monitoring of dietary trends. The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Preliminary study on seasonal solar energy storage by geothermal wells; Etude preliminaire sur le stockage solaire saisonnier par puits geothermique

    Energy Technology Data Exchange (ETDEWEB)

    Chapuis, S.; Bernier, M. [Ecole Polytechnique, Montreal, PQ (Canada). Dept. de Genie Mecanique

    2008-08-15

    The feasibility of storing solar energy in the summer and using it to heat homes in the winter was examined using the TRNSYS simulation software. Following a literature review of the principles regarding energy storage, this paper described the Okotoks demonstration project which involves the latest advances in solar heating technology for creating an energy-efficient community of 52 homes. The TRNSYS simulation software was used to study the environmental conditions, technical system design and hydrogeological study of the site proposed for underground thermal storage. In solar seasonal storage systems, energy is transferred from rooftop collectors, by means of a heat transfer fluid, to be stored underground in an aquifer or in rock. The system studied was unique since it used 2 U-shaped pipe networks that simultaneously recharged and unloaded seasonally stored solar energy in geothermal wells without using a buffer tank. The TRNSYS simulation results indicated that heat loss is a large limiting factor for this technology.17 refs., 4 tabs., 12 figs.

  14. Sports and Technology. Resources in Technology.

    Science.gov (United States)

    Hadley, Fred W.

    1993-01-01

    Technology is making a significant impact in all areas of sports and recreation. New equipment and computer training methods in spectator sports have had a major social and economic impact, and individual sports have reaped the benefits of technology. (JOW)

  15. Plasma technology directory

    International Nuclear Information System (INIS)

    Ward, P.P.; Dybwad, G.L.

    1995-01-01

    The Plasma Technology Directory has two main goals: (1) promote, coordinate, and share plasma technology experience and equipment within the Department of Energy; and (2) facilitate technology transfer to the commercial sector where appropriate. Personnel are averaged first by Laboratory and next by technology area. The technology areas are accelerators, cleaning and etching deposition, diagnostics, and modeling

  16. Hydrogen technologies and the technology learning curve

    International Nuclear Information System (INIS)

    Rogner, H.-H.

    1998-01-01

    On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)

  17. Etude d'integration fonctionnelle du cycle de developpement des produits et des communautes de pratique virtuelles

    Science.gov (United States)

    Doumit, Nancy

    Product development, subject to time constraints and system complexity, needs synchronous communication between different disciplines and locations in order to enable knowledge sharing. Being well supported, informal information flow increases productivity during product realization. Therefore, manufacturing industries are exploring the use of Enterprise Social Media (ESM) functionalities. This thesis explores the functional integration of formal information technologies such as Product Lifecycle Management (PLM) software with informal technologies as ESM through an industrial case study. Reviewing literature, the candidate has identified a gap between Virtual Communities of Practice (VCoP) and product development, as well as the correlation of PLM solutions and noncontrolled ESM in the aerospace industry. In order to disseminate a descriptive study of the current collaboration status, the author has undertaken online surveys for geodistant employees of the same department, semi-structured interviews and research among existing documentations. Subsequently, a Quality Functional Analysis is performed via two modified House of Quality matrices (PLM and ESM) to assign a convenient support for information transfer independently of its content maturity. Users' needs are categorized, and for each category a choice of platform is made with further recommendation regarding the use of the function or the need of human intervention. VCoP form an integrated part of the solution where employees support the technical content. Thus, essential roles and responsibilities are presented to maintain existing CoP and develop new ones. Finally, the candidate presents the limits of this research, gives recommendations for the manufacturing industry and suggests potential continuation of this study using PLM 2.0 with noncontrolled ESM tools.

  18. International Technology Transfer.

    Science.gov (United States)

    Morris, Robert G.

    The flow of technology out of the United States is discussed. Methods of technology flow, such as licensing and investing, are identified, and the advantages and disadvantages of technology transfer are discussed, especially in relation to the government's role. (MLH)

  19. Computer technology and evolution

    OpenAIRE

    Mainzer, Klaus

    1998-01-01

    Computer technology and evolution : from artificial intelligence to artificial life. - In: Advances in the philosophy of technology / ed. by Evandro Agazzi ... - Newark, Del. : Soc. for Philosophy and Technology, 1999. - S. 105-119

  20. Excimer Laser Technology

    CERN Document Server

    Basting, Dirk

    2005-01-01

    This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

  1. Technology Transfer Report

    Science.gov (United States)

    2000-01-01

    Since its inception, Goddard has pursued a commitment to technology transfer and commercialization. For every space technology developed, Goddard strives to identify secondary applications. Goddard then provides the technologies, as well as NASA expertise and facilities, to U.S. companies, universities, and government agencies. These efforts are based in Goddard's Technology Commercialization Office. This report presents new technologies, commercialization success stories, and other Technology Commercialization Office activities in 1999.

  2. Technology transfer by multinationals

    OpenAIRE

    Kostyantyn Zuzik

    2003-01-01

    The paper analyses the issue of technology transfer by multinational corporations. The following questions are explored: (a) world market of technologies, the role of MNCs (b) Choice of the technology transfer mode, Dunning's OLI-theory as a factor of the choice of the mode of transfer (c) measurement and profitability of technology transfer (d) transfer of technology through partnerships, JVs, alliances and through M&As (e) aspects of technology transfer by services multinationals. Paper uti...

  3. Morgantown Energy Technology Center, technology summary

    International Nuclear Information System (INIS)

    1994-06-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. METC's R ampersand D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities

  4. Aerospace Technology: Technical Data and Information on Foreign Test Facilities

    Science.gov (United States)

    1990-06-22

    Centre d’Etudes Aerodynamiques et Thermiques (Aerodynamics and Thermics Study Center) CEPr Centre d’Essais des Propulseurs de Saclay (Saclay Propulsion...configurations. In addition, wind tun- nels are used to measure aerodynamic forces and moments and such parameters as pressure, heat transfer , and...shock tunnel. Testing Capabilities: The T-3 is capable of conducting scale model tests, heat transfer rates, pressure distribution measurements, schlieren

  5. Constructive Technology Assessmentand Technology Dynamics. The Case of Clean Technologies

    NARCIS (Netherlands)

    Schot, Johan

    1992-01-01

    A synthesis of neo-Schumpeterian evolutionary, sociological, and historical coevolution ary models could be used for constructive technology assessment, aimed at the active management of the process of technological change. This article proposes a synthetic quasi-evolutionary model, in which

  6. Fundamentals of technology roadmapping

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.L.; Bray, O.H.

    1997-04-01

    Technology planning is important for many reasons. Globally, companies are facing many competitive problems. Technology roadmapping, a form of technology planning can help deal with this increasingly competitive environment. While it has been used by some companies and industries, the focus has always been on the technology roadmap as a product, not on the process. This report focuses on formalizing the process so that it can be more broadly and easily used. As a DOE national security laboratory with R&D as a major product, Sandia must do effective technology planning to identify and develop the technologies required to meet its national security mission. Once identified, technology enhancements or new technologies may be developed internally or collaboratively with external partners. For either approach, technology roadmapping, as described in this report, is an effective tool for technology planning and coordination, which fits within a broader set of planning activities. This report, the second in a series on technology roadmapping, develops and documents this technology roadmapping process, which can be used by Sandia, other national labs, universities, and industry. The main benefit of technology roadmapping is that it provides information to make better technology investment decisions by identifying critical technologies and technology gaps and identifying ways to leverage R&D investments. It can also be used as a marketing tool. Technology roadmapping is critical when the technology investment decision is not straight forward. This occurs when it is not clear which alternative to pursue, how quickly the technology is needed, or when there is a need to coordinate the development of multiple technologies. The technology roadmapping process consists of three phases - preliminary activity, development of the technology roadmap, and follow-up activity.

  7. Study of current instabilities in high resistivity gallium arsenide; Etude des instabilites de courant dans l'arseniure de gallium de haute resistivite

    Energy Technology Data Exchange (ETDEWEB)

    Barraud, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    'arseniure de gallium de haute resistivite. Nous montrons que ces oscillations sont associees a la progression lente d'un domaine de fort champ electrique a travers tout l'echantillon. L'etude experimentale des proprietes de ces instabilites nous a permis de differencier ce phenomene de l'effet Gunn, des effets acoustoelectriques et des effets de contacts. Nous proposons pour rendre compte de ce type d'instabilites un mecanisme de piegeage differentiel sur des impuretes repulsives, capable de depeupler la bande de conduction a champ electrique eleve et de donner naissance a un domaine de champ intense. Le developpement qualitatif de ce modele nous permet de rendre compte de toutes les proprietes des cristaux d'arseniure de gallium de haute resistivite soumis a un champ electrique eleve: augmentation de la constante de Hall, existence d'un seuil de tension pour ces oscillations, formation de domaines de champ intense, lenteur de la propagation de ces domaines, enfin possibilite de renverser le sens de la propagation du domaine sans detruire celui-ci. Le developpement quantitatif du modele permet de calculer les differentes grandeurs caracteristiques de ces instabilites. La comparaison avec l'experience montre une bonne concordance, les legeres divergences provenant surtout de la meconnaissance actuelle des proprietes de transport dans l'arseniure de gallium aux champs electriques eleves. A la lumiere de ce modele, il apparait que le phenomene d'instabilite etudie peut se produire pour une gamme etendue de concentrations en centres repulsifs, et pour toute une gamme de resistivites. Ceci explique qu'il apparaisse systematiquement dans l'arseniure de gallium de moyenne et haute resistivite. (auteurs)

  8. Contribution to the study of the geophysical behaviour of lead-210 by application of alpha spectrometry; Contribution a l'etude du comportement geophysique du plomb 210 par application de la spectrometrie alpha

    Energy Technology Data Exchange (ETDEWEB)

    Nezami, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-06-01

    A study of the changes in the lead-210 contents of rain-water and of water produced by melting polar ice has required the development of a method for dosing lead-210, an {alpha} emitter. This method is 40 times more sensitive than that which measures the lead-210 by bismuth-210, a ({beta} emitter. The first part of the report presents the study of a spectrometry using semiconductor detectors; a catalogue of a spectra shows the advantages of this method. In the second part will be found at first a new chemical separation method for polonium-210 and the results obtained with this method. The main results obtained on the geophysical behaviour of lead-210 are the following: - the monthly lead-210 and polonium-210 contents in rain water are approximately constant with time. - in the Gif-sur-Yvette region, the clean-up by 'dry fall-out' can attain 40 to 50 per cent of the total fall-out. - a study of Antarctic ice samples makes it possible to determine an annual accumulation rate equivalent to 13.8 cm of water and to show discrepancies in the periodic concentrations which correspond to the latest maxima of solar activity. - a balance is drawn up between the radon produced by the continents and the lead-210 fall-out. (author) [French] Une etude sur les variations de la teneur en plomb 210 des eaux de pluie et des eaux de fusion des glaces polaires a necessite la mise au point d'une methode de dosage du plomb 210 emetteur {alpha}. Cette methode permet d'obtenir une sensibilite quarante fois superieure a celle dosant le plomb 210 par le bismuth 210 emetteur {beta}. La premiere partie du travail presente l'etude de la spectrometrie {alpha} par detecteur a semiconducteurs, un catalogue de spectres {alpha} met en evidence les avantages de cette methode. Dans la deuxieme partie on trouvera en premier lieu une nouvelle methode chimique de separation du polonium 210 ainsi que les resultats obtenus grace a cette methode. Les principaux resultats sur le

  9. Educational Technology in China

    Science.gov (United States)

    Meifeng, Liu; Jinjiao, Lv; Cui, Kang

    2010-01-01

    This paper elaborates the two different academic views of the identity of educational technology in China at the current time--advanced-technology-oriented cognition, known as Electrifying Education, and problem-solving-oriented cognition, known as Educational Technology. It addresses five main modes of educational technology in China: as a…

  10. EPA'S ENVIRONMENTAL TECHNOLOGIES

    Science.gov (United States)

    The use of innovative technology is impeded by the lack of independent, credible information as to how the technology performs. Such data is needed by technology buyers and regulatory decision makers to make informed decisions on technologies that represent good financial invest...

  11. Emerging technology and ethics

    CERN Document Server

    Wakunuma, Kutoma

    2011-01-01

    This e-book on Emerging Technologies and Ethics includes a collection of essays which explore the future and ethics of emerging information and communication technologies. Articles in the collection include an overview of the legal implications which may be relevant to the ethical aspects of emerging technologies and also ethical issues arising from the mass-take up of mobile technologies.

  12. Student Technology Assistant Programs.

    Science.gov (United States)

    Van Eck, Rick; Marvin, Eric; Burr-McNeal, Blake; Jones, Marshall; Lowther, Deborah

    Schools face significant challenges in implementing computing technology within their curriculum. When technology support falters, the integrity of a school district's entire technology program is at risk. Teachers who have invested time to develop lesson plans using technology, especially those who are still newcomers, are less likely to continue…

  13. Marketing technology in macroeconomics.

    Science.gov (United States)

    Tamegawa, Kenichi

    2012-01-01

    In this paper, we incorporate a marketing technology into a dynamic stochastic general equilibrium model by assuming a matching friction for consumption. An improvement in matching can be interpreted as an increase in matching technology, which we call marketing technology because of similar properties. Using a simulation analysis, we confirm that a positive matching technology shock can increase output and consumption.

  14. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

  15. Soil washing technology evaluation

    International Nuclear Information System (INIS)

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

  16. NASA Technology Transfer System

    Science.gov (United States)

    Tran, Peter B.; Okimura, Takeshi

    2017-01-01

    NTTS is the IT infrastructure for the Agency's Technology Transfer (T2) program containing 60,000+ technology portfolio supporting all ten NASA field centers and HQ. It is the enterprise IT system for facilitating the Agency's technology transfer process, which includes reporting of new technologies (e.g., technology invention disclosures NF1679), protecting intellectual properties (e.g., patents), and commercializing technologies through various technology licenses, software releases, spinoffs, and success stories using custom built workflow, reporting, data consolidation, integration, and search engines.

  17. Physics and high technology

    International Nuclear Information System (INIS)

    Shao Liqin; Ma Junru.

    1992-01-01

    At present, the development of high technology has opened a new chapter in world's history of science and technology. This review describes the great impact of physics on high technology in six different fields (energy technology, new materials, information technology, biotechnology, space technology, and Ocean technology). It is shown that the new concepts and new methods created in physics and the special conditions and measurements established for physics researches not only deepen human's knowledge about nature but also point out new directions for engineering and technology. The achievements in physics have been more and more applied to high technology, while the development of high technology has explored some new research areas and raised many novel, important projects for physics. Therefore, it is important for us to strengthen the research on these major problems in physics

  18. Advancement in Engineering Technology

    DEFF Research Database (Denmark)

    Kalia, Kartik; Rehman, M. Atiqur; Hussain, Dil muhammed Akbar

    2016-01-01

    but to harvest those ideas, technology is a must. With the huge requirement of engineering equipment's, the industry needs specialists who can manage and operate these technologies. Detailed information about the merits and demerits of technology is also mentioned in this paper. Findings: Technology has affected...... the environment on a great scale; in some cases, technology is even replacing human being or use of manpower. So proper counter measures have been mentioned, which can be used to control and limit harmful effect....

  19. Newnes communications technology handbook

    CERN Document Server

    Lewis, Geoff

    1994-01-01

    Newnes Communications Technology Handbook provides a discussion on different topics relevant to communications technology. The book is comprised of 39 chapters that tackle a wide variety of concern in communications technology. The coverage of the text includes technologies, such as analog digital communications systems, radio frequency receiver, and satellite systems. The book also discusses some methods and techniques used in communications technology, including mixer signal processing, modulation and demodulation, and spread spectrum techniques. The text will be of great use to engineers, t

  20. Study on the bound water of several high specific surface-area oxides (beryllia, alumina, silica-alumina); Etude de l'eau de constitution de plusieurs oxydes a grande surface specifique (glucine, alumine, silice-alumine)

    Energy Technology Data Exchange (ETDEWEB)

    Rouquerol, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-11-01

    This study is concerned with the bound water of several oxides (beryllia, alumina, silica-alumina) at different steps of their dehydration (heating temperatures between 150 and 1100 deg. C). The following techniques have been used simultaneously: Thermal analysis (a new method has been developed), nitrogen adsorption (study of the texture), Diborane hydrolysis (qualitative and quantitative analysis of surface water), Infra-red spectrography (in the absorption range of water), Nuclear magnetic resonance (in the resonance range of protons). Thanks to these different techniques, five kinds of bound water have been observed. Attention is called on the great influence of the thermal treatment conditions on the evolution of the products resulting from the decomposition of alumina {alpha}-trihydrate Al(OH){sub 3} and beryllium {alpha}-hydroxide, in the course of the dehydration. Moreover, the author emphasizes the peculiar properties of the two kinds of oxides (alumina and beryllia) prepared through a new method of treatment under low pressure and constant speed of decomposition. Such particular features concern mainly texture, bound water, and consequently, also catalytic activity. (author) [French] Ce travail porte sur l'eau de constitution de plusieurs oxydes (glucine, alumine, silice-alumine) aux differents degres de leur deshydratation (temperatures de traitement comprises entre 150 et 1100 deg. C). Cette etude met simultanement en oeuvre: l'analyse thermique (proposition d'une nouvelle methode), l'adsorption d'azote (etude de texture), l'hydrolyse du diborane (analyse qualitative et quantitative de l'eau de surface), la spectrographie infra-rouge (dans le domaine d'absorption de l'eau), la resonance magnetique nucleaire (dans le domaine de resonance des protons). A l'aide de ces differentes techniques, cinq formes d'eau de constitution ont ete observees. L'attention est attiree sur la tres grande influence

  1. Le changement comme tradition dans la recherche et la formation a la recherche en biotechnologie et en peripherie Etude de cas en sciences de la sante, sciences naturelles et genie

    Science.gov (United States)

    Bourque, Claude Julie

    Le champ de la recherche scientifique et de la formation a la recherche est traverse depuis quelques dizaines d'annees par plusieurs courants et discours associes au changement, mais peu de travaux empiriques permettent de comprendre ce qui change concretement. C'est la contribution originale de cette these au champ de l'education, plus specifiquement a l'etude sociologique de l'enseignement superieur ou sont concentrees les activites liees a la triade thematique du programme doctoral dans lequel elle a ete produite : recherche, formation et pratique. L'enquete-terrain a ete realisee en 2009 et 2010 aupres de 808 repondants affilies a 60 etablissements au Quebec et a produit un vaste materiau de nature mixte (donnees quantitatives et qualitatives). Un portrait de la nebuleuse biotechnologique qui touche les secteurs des sciences de la sante, des sciences naturelles et du genie a ete realise. Ce domaine concerne des dizaines de disciplines et se revele de nature transdisciplinaire, mais les pratiques n'y sont pas davantage marquees par le changement que celles d'autres domaines connexes. Les dynamiques sociales ont fait l'objet d'analyses comparatives dans quatre contextes: le choix des programmes, des objets et des methodes, le financement, la diffusion et la planification de la carriere. Les resultats indiquent que les echanges entre les agents traditionnellement situes au coeur des activites de recherche dominent ces dynamiques dans tous les contextes etudies. L'etude des representations au fondement des pratiques a revele l'existence de trois ecoles de pensee qui coexistent dans le champ scientifique: academique, pragmatique et economiste. Ces ecoles permettent de categoriser les agents en fonction des zones de fractures qui marquent leurs oppositions tout en identifiant ce qu'ils ont en commun. Les representations et les pratiques liees a la formation temoignent d'un habitus plutot homogene, alors que les contradictions semblent plus souvent ancrees dans des

  2. Contribution to the study of uranyl salts in butyl phosphate solutions; Contribution a l'etude des solutions de sels d'uranyle dans les phosphates butyliques

    Energy Technology Data Exchange (ETDEWEB)

    Coulon, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-06-01

    A spectroscopic study in the normal infrared region and involving the following associations: tri-alkyl phosphates (tri-butyl, tri-ethyl, tri-methyl), uranyl salts (nitrate, chloride, acetate) has confirmed the existence of an interaction between the phosphoryl group and the uranium atom, as shown by a movement of absorption band for the valency P = 0 from {approx} 1270 cm{sup -1} to {approx} 1180 cm{sup -1}. A study of the preparation, analysis and spectroscopy of the solids obtained by the precipitation of uranyl salts by acid butyl phosphates has been carried out. By infrared spectrophotometry it has been shown that the tri-butyl and di-butyl phosphates are associated in non-polar diluents even before the uranium is introduced. The extraction of uranyl salts from acid aqueous solutions by a diluted mixture of tri-butyl and di-butyl phosphates proceeds by different mechanisms according to the nature of the ion (nitrate or chloride). (author) [French] Une etude spectroscopique dans l'infrarouge moyen portant sur les associations: - phosphates trialcoyliques (tributylique - triethylique - trimethylique) - sels d'uranyle (nitrate, chlorure, acetate) a confirme l'existence d'une interaction entre le groupement phosphoryle et l'atome d'uranium, se manifestant par un deplacement de la bande d'absorption de la vibration de valence P = 0 de {approx} 1270 cm{sup -1} a {approx} 1180 cm{sup -1}. Une etude preparative, analytique et spectroscopique des solides obtenus par precipitation de sels d'uranyle par les phosphates butyliques acides a ete effectuee. La spectrophotomerie infrarouge met en evidence l'association, anterieure a toute introduction d'uranium, des phosphates tributylique et dibutylique dans des diluants non polaires. L'extraction de sels d'uranyle, d'une solution aqueuse acide par un melange dilue de phosphates tributylique et dibutylique, s'effectue suivant des processus differents a la

  3. Feasibility study for the installation of a small hydro electric power plant; Etude de faisabilite. Petite centrale hydro-electrique au lieu dit 'Sous les Roches' a Sonceboz

    Energy Technology Data Exchange (ETDEWEB)

    Tissot, N. [MHyLab, Mini-Hydraulics Laboratory, Montcherand (Switzerland); Hausmann, H. [Hans Hausmann, Bevilard (Switzerland)

    2003-07-01

    This report for the Swiss Federal Office of Energy presents a technical, economical and ecological analysis of the feasibility of a small hydroelectric power plant at Sonceboz, in the Swiss Jura mountains. The power of the planed plant would typically be 500 kW for a water head of about 10 m. The study shows that, compared to one single turbine, a pair of Kaplan type turbines would be operational over a larger range of the river's water flow rate. This solution would be a little bit more costly but offer more flexibility for maintenance. Two maximum water flow rates are considered, 4.5 and 6 m{sup 3}/s respectively. According to the economical study, done with current electric kWh prices, both configurations are viable while the largest flow rate leads to a larger profit. The report is rounded up by a sensitivity analysis considering variations in annual power generation, electro-mechanical and construction cost as well as turbine efficiency. It indicates that this last factor could be crucial for the overall profitability. [French] Ce rapport est le resultat detaille de l'analyse technico-economique et ecologique de faisabilite de la realisation d'une petite centrale hydroelectrique basse chute qui pourrait exploiter une denivellation d'environ 10 m pour une puissance de l'ordre de 500 kW pres de Sonceboz dans le Jura suisse. L'etude montre que le couplage de deux turbines Kaplan offrirait une possibilite de fonctionnement sur une plus grande plage de flux ainsi qu'une plus grande flexibilite de maintenance, ceci pour un cout legerement superieur a l'option a une seule turbine. Les debits de 4.5 et 6 m{sup 3}/s sont consideres. L'etude economique montre que le debit de 6 m{sup 3}/s est plus rentable au prix de vente actuel du kWh. L'article se termine par une analyse de sensibilite sur les incertitudes concernant la production annuelle, les prix de l'electromecanique et du genie civil et le rendement des

  4. A comparative study of the {sup 90}Sr/Ca ratio in human diet and bone tissue; Etude comparee chez l'homme du rapport {sup 90}Sr/Ca dans l'alimentation et le tissu osseux

    Energy Technology Data Exchange (ETDEWEB)

    Coulon, R.; Madelmont, C. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    A comparative study of both the evolution of strontium-90 content in the bones of individuals of different ages for the period 1962-1967 as related to calcium, and the corresponding diets allowed to establish the relationship between food contribution and the resulting bone burden. The study is mainly devoted to the group of adults for which a mathematical expression is proposed which allows for the exchangeable form of a skeletal calcium fraction turned over in less than a year from the dietary calcium, and the stabilized form constituting the larger part of bone tissue characterized by a slow turnover. Both the amount of the exchangeable fraction and the turnover rate of the stabilized fraction are determined for vertebrae and ribs. At birth, bone levels indicate that the calcium used for skeleton modelling during foetal life originates from both maternal diet and bone tissue and a value is given, to their relative significance. There appears a good relationship between bone levels in infants from 6 months to 1 year of age and their diets. The physiological parameters particular to this age are quantified. (authors. [French] L'etude comparee de l'evolution de la teneur en strontium 90 rapportee au calcium, mesuree dans les os d'individus a differents ages durant la periode 1962-1967 et celle du regime alimentaire correspondant, a permis d'etablir la relation qui existe entre l'apport du a l'alimentation et la charge osseuse qui en resulte. L'essentiel de l'etude est consacre au cas des adultes. Pour ce groupe la formulation mathematique proposee tient compte de la presence de la forme echangeable d'une fraction du calcium osseux, renouvelee en moins d'un an a partir du calcium alimentaire, et de la forme stabilisee, constituant la majeure partie du tissu osseux, caracterisee par un renouvellement lent. L'importance de la fraction echangeable, ainsi que le taux de renouvellement de la fraction stabilisee sont

  5. Etude de la performance de piles a combustible microbiennes et l'effet des materiaux d'electrodes

    Science.gov (United States)

    Martin, Edith

    Recent climate change has brought a whole new dimension to the energy field since now we must change our primary source, fossil fuels. The microbial fuel cell (MFC) technology emerged as a result of recent efforts in the development of alternative sources of energy. This project aims to improve the performance maximization of such celsl. It is assumed that the microbial fuel cells' functioning is influenced by the operation conditions as well as the biofilm development and other limitations. It is also appropriate to suppose that the electrode materials also have consequences on either the microorganisms' activity or the electrochemical reaction reactivity. Thus, various operating conditions and configurations are tested to identify the specific effects of these changes on cell performance. Also, the development of the biofilm is extensively studied under various conditions to improve the electrons transfer between the active biofilm and the anode. These experiments and analyses permitted to identify various effects that can improve the microbial fuel cell performance. Thus, the influence of organic load (of glucose and acetate), pH and operating temperature of the fuel cell has been shown and optimal values were determined, leading to a significant increase in the anodic biofilm activity and a decrease of the methanogens activity, the latter reducing the coulombic efficiency by diverting a non-negligible substrate amount for their benefit. Hence, organic loading of 2 to 4 g L-1 day-1, pH between 6,25 and 6,5 as well as high cathode temperature (62 °C) but moderate anode temperature (30 °C) caused a maximum power generation increase to 19,2 W m -3. During the experiments with acetate as substrate, distance between electrodes and fuel cell volume have been reduced, leading to a power density of 92,4 W m-3. All these observations are the subject of the first article presented in this thesis. Since the microbial fuel cell power generation depends on the number of

  6. Etude Climat no. 39 'More than 800 agricultural and agri-food sites affected by the EU ETS'

    International Nuclear Information System (INIS)

    Foucherot, Claudine; Bellassen, Valentin

    2013-01-01

    both a source of additional revenue to the agricultural sector and an incentive to implement less polluting practices and technologies. The rules are changing from 2013, with allowance allocation being defined according to a benchmark of carbon intensity - rather than historical emissions - and an end to free allocations for sectors with no risk of carbon leakage. This means that some agricultural and agri-food installations will have to pay for part of their emissions. Installations covered by the EU ETS will therefore have to reduce their emissions - some have already begun - in order to achieve compliance. The main solution is the substitution of fossil fuels with biomass, which is considered to be carbon neutral. Other solutions are beginning to be developed, such as high-temperature catalysis among producers of nitrogen fertilizers, heat recovery in dairies and dryeration in dryers, etc

  7. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  8. Educational technology and the new technologies

    NARCIS (Netherlands)

    Verhagen, Pleunes Willem; Plomp, T.

    1989-01-01

    Like everywhere in our culture, new technologies gradually penetrate the field of education. This may be seen as a problem area, which asks for appropriate, actions by teachers, curriculum experts, instructional designers and others. As "technology" seems to be the main issue,one may quation whether

  9. Search Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  10. Available Technologies | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Our team of technology transfer specialists has specialized training in invention reporting, patenting, patent strategy, executing technology transfer agreements and marketing. TTC is comprised of professionals with diverse legal, scientific, and business/marketing expertise. Most of our staff hold doctorate-level technical and/or legal training.

  11. SHARED TECHNOLOGY TRANSFER PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    GRIFFIN, JOHN M. HAUT, RICHARD C.

    2008-03-07

    The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

  12. Contribution to the study of 14 MeV neutron scattering by {sup 12}C using a time-of-flight spectrometer (1963); Contribution a l'etude de la diffusion des neutrons de 14 MeV par {sup 12}C, a l'aide d'un spectrometre a temps de vol (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Perrin, P. [Commisariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-07-15

    Experimental measurements of 14 MeV fast neutrons scattering by {sup 12}C by time-flight spectrometer, with a 1.7 n. sec over-all resolution. The excitation of the 7.65 MeV level is observed. (author) [French] Etude experimentate de la diffusion par {sup 12}C des neutrons rapides de 14 MeV a l'aide d'un spectrometre de resolution totale de 17 n/s. Observation de l'excitation du niveau 0+ de 7,65 MeV. (auteur)

  13. Chrono-potentiometry in molten chlorides. Application to the study of the electrochemical properties of uranium and plutonium in the LiCl-KCl eutectic; Chronopotentiometrie dans les chlorures fondus. Application a l'etude des proprietes electrochimiques de l'uranium et du plutonium dans l'eutectique LiCl-KCl

    Energy Technology Data Exchange (ETDEWEB)

    Leseur, A. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-05-01

    Using solutions of cadmium chloride in the eutectic LiCl-KCl, a chrono-potentiometric method has been developed with a view to its application to the study of molten solutions. Particular attention has been paid to the choice of the indicator electrodes. The method makes it possible to analyze molten solutions quantitatively and to determine diffusion coefficients and their activation energies; it yields furthermore information about the nature and the behaviour of ionic species in solution. The method has been applied to the study of solutions of uranium and plutonium chloride in the eutectic LiCl-KCl. Linear chrono-amperometry has been used for studying these solutions quantitatively, but chrono-potentiometry, of which the theory is better developed, is better suited to a quantitative study. The results obtained have made it possible to determine the diffusion coefficients of the ions Cd{sup 2+}, U{sup 3+}, U{sup 4+} and U(IV) in the presence of F{sup -} and Pu{sup 3+} ions, as well as the activation energy of the diffusion coefficients. (author) [French] La mise au point de la chronopotentiometrie comme moyen d'etude des solutions fondues a ete effectuee avec des solutions de chlorure de cadmium dans l'eutectique LiCl-KCl. Le probleme du choix des electrodes indicatrices a ete particulierement etudie. La methode permet l'analyse quantitative des solutions fondues ainsi que la determination des coefficients de diffusion et de leurs energies d'activation: elle donne en outre des renseignements sur la nature et le comportement des especes ioniques en solution. Elle a ete appliquee a l'etude des solutions des chlorures d'uranium et de plutonium dans l'eutectique LiCl-KCl. La chronoamperometrie lineaire a ete utilisee pour l'etude qualitative de ces solutions, mais la chronopotentiometrie, dont la theorie est plus complete, convient mieux pour l'etude quantitative. Les resultats obtenus ont permis de determiner les

  14. ACR-700 advanced technologies

    International Nuclear Information System (INIS)

    Tapping, R.L.; Turner, C.W.; Yu, S.K.W.; Olmstead, R.; Speranzini, R.A.

    2004-01-01

    A successful advanced reactor plant will have optimized economics including reduced operating and maintenance costs, improved performance, and enhanced safety. Incorporating improvements based on advanced technologies ensures cost, safety and operational competitiveness of the ACR-700. These advanced technologies include modern configuration management; construction technologies; operational technology for the control centre and information systems for plant monitoring and analysis. This paper summarizes the advanced technologies used to achieve construction and operational improvements to enhance plant economic competitiveness, advances in the operational technology used for reactor control, and presents the development of the Smart CANDU suite of tools and its application to existing operating reactors and to the ACR-700. (author)

  15. Avionics systems integration technology

    Science.gov (United States)

    Stech, George; Williams, James R.

    1988-01-01

    A very dramatic and continuing explosion in digital electronics technology has been taking place in the last decade. The prudent and timely application of this technology will provide Army aviation the capability to prevail against a numerically superior enemy threat. The Army and NASA have exploited this technology explosion in the development and application of avionics systems integration technology for new and future aviation systems. A few selected Army avionics integration technology base efforts are discussed. Also discussed is the Avionics Integration Research Laboratory (AIRLAB) that NASA has established at Langley for research into the integration and validation of avionics systems, and evaluation of advanced technology in a total systems context.

  16. The Human Technology

    DEFF Research Database (Denmark)

    Fausing, Bent

    towards this very special and lost humanity. Without the technology, no special humanity is the prophecy. This personification or anthropomorphism is important for the branding of new technology. The technology is seen as creating a technotranscendens towards a more qualified humanity, which is in contact...... with fundamental human values like intuition, vision and sensing; all the qualities the technology, the industrialisation and rationalisation, or in short modernity, has been criticized for having taken away from human existence. What technology has taken away now comes back through new technology as an aid...

  17. [Health technology in Mexico].

    Science.gov (United States)

    Cruz, C; Faba, G; Martuscelli, J

    1992-01-01

    The features of the health technology cycle are presented, and the effects of the demographic, epidemiologic and economic transition on the health technology demand in Mexico are discussed. The main problems of science and technology in the context of a decreasing scientific and technological activity due to the economic crisis and the adjustment policies are also analyzed: administrative and planning problems, low impact of scientific production, limitations of the Mexican private sector, and the obstacles for technology assessment. Finally, this paper also discusses the main support strategies for science and technology implemented by the Mexican government during the 1980s and the challenges and opportunities that lie ahead.

  18. The atomic energy course of the 'Institut National des Sciences et Techniques nucleaires' at the centre d'Etudes Nucleaires at Saclay; L'enseignement de genie atomique de l'Institut national des Sciences et Techniques nucleaires au Centre d'Etudes nucleaires de Saclay

    Energy Technology Data Exchange (ETDEWEB)

    Baissas, H. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    foreign students. 8- Annexe: list of courses, practical work, pile projects drawn up by the 1957 students. (author)Fren. [French] 1- Les raisons de sa creation. L'electricite de France et l'industrie interessee par le developpement de l'Energie atomique ont demande au Commissariat a l'Energie atomique de former des ingenieurs capables d'etudier des projets de piles et de diriger leur construction. 2- Recrutement et Droits d'inscription. Les demandes d'inscription ont toujours depasse les possibilites. Cette annee, les cours sont suivis par 74 eleves permanents, dont 20 etrangers, et une centaine d'auditeurs libres. Tous les elevont deja ingenieurs ou nantis de grades universitaires eleves. Droit d'inscription: 250 000 F pour les eleves, 125 000 F pour les auditeurs. 3- Organisation de l'Enseignement. II comprend deux options: physique et chimie et dans chaque option: une centaine de conferences, une trentaine de travaux pratiques, des stages dans les services, l'etude d'un projet de reacteur par un groupe de 4 ou 5 eleves. L'ensemble occupe l'annee universitaire du 1 novembre au 14 juillet. 4- Sanction. Un examen final combinant les notes de deux epreuves theoriques, des travaux pratiques, du stage, et du projet conduit a un diplome d'ingenieur en genie atomique. Il n'est pas cree en realite de nouveaux ingenieurs; une mention nouvelle est seulement ajoutee a un diplome deja acquis. Les resultats ont toujours ete excellents. Le pourcentage des echecs est tres faible. 5- Placement des Diplomes. Ils reviennent tous dans leurs industries d'origine qui ont paye leurs salaires et les droits d'inscription en se privant de leurs services pendant les neuf mois de duree des cours. 6- Creations analogues. Un cours analogue a ete cree au Centre d'Etudes Nucleaires de Grenoble. Tandis que celui de SACLAY s'adresse plus specialement aux ingenieurs deja en fonctions, celui de Grenoble

  19. Focus on Technologies: Worry or Technology?

    Directory of Open Access Journals (Sweden)

    Saulius Kanišauskas

    2015-10-01

    Full Text Available The paper analyses different attitudes towards technologies in contemporary philosophical discourses. It points out that classical notion of technology formulated by Martin Heidegger seems to be more and more often questioned and even forgotten. As a result, it is being replaced by the theory of determinism, according to which the change of technologies determines the changes in social systems, the human being including. This happens this way and not vice versa. Nowadays technē, or “technika” (in English: technology is mostly understood in the instrumental meaning or in the meaning of power. It is considered to be a powerful means, tool or mechanism to influence, change, control and manipulate human consciousness and human feelings. Despite the fact that technologies have already been tamed, the problem of huge responsibility for using and developing them arises. It is questioned whether the increasing society’s attention to modern technologies is not a particular “technology” of the postmodern capitalism to manipulate social consciousness. In parallel with “yes” answer to this question, Albert Borgmann’s idea that the causes of technological development have an ontological dimension, i.e. the causes are rooted in the nature of human beings themselves and their desire to adore own creativity, is discussed. Thus, it becomes necessary to probe deeper into the nature of creativity.

  20. General survey of technology management

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Yong Ha; Jang Dong Hun; Lee, In Woo

    1999-02-15

    The content of this book are technology and management, conception of technology management, feature and model of technology management system, elements of technology management, performance measurement of technology management, connectivity between technology and business function, system management of technology, manpower management, readership and technology management, motivation and technology management, management of technical investment evaluation, new item development and marketing, product liability management, intellectual property rights and transfer of technology.

  1. General survey of technology management

    International Nuclear Information System (INIS)

    Shin, Yong Ha; Jang Dong Hun; Lee, In Woo

    1999-02-01

    The content of this book are technology and management, conception of technology management, feature and model of technology management system, elements of technology management, performance measurement of technology management, connectivity between technology and business function, system management of technology, manpower management, readership and technology management, motivation and technology management, management of technical investment evaluation, new item development and marketing, product liability management, intellectual property rights and transfer of technology.

  2. Contribution to the theoretical and experimental study of the electron-volt effect in N-P junctions; Contribution a l'etude theorique et experimentale de l'effet electronvoltaique dans les jonctions N-P

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen Van, Dong [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-15

    , taking into account other phenomena which occur at low temperature. In the fourth part, results concerning the healing of the defects and protection measures against too energetic {beta} rays are described. A healing difference was observed between the lifetime and the conductivity. Finally, interesting results were obtained from experiments using a cadmium sulphide film to transform the {beta} particles of {sup 90}Sr-{sup 90}Y into photons. (author) [French] Le but propose dons le cadre de ce travail est d'etudier le comportement d'une jonction semi-conductrice sous l'action des rayons {beta}. L'etude a porte d'une part sur la conversion directe de l'energie rayonnee par une source radioactive en energie electrique utilisable a l'aide des jonctions N-P, et d'autre part sur la cinetique des defauts produits dans les cristaux de semi-conducteur par les rayons {beta} de grande energie. Dans la premiere partie du travail, on a essaye de completer les theories anterieures de l'effet electron-voltaique dans les jonctions en faisant une analyse mathematique de l'effet. Ceci a permis d'atteindre une equation unique dans laquelle figurent les parametres electriques et geometriques du semi-conducteur, de la jonction et les proprietes du rayonnement incident. D'autre part, on a etudie d'une maniere plus approfondie le courant de diffusion des porteurs de charge crees par le bombardement en tenant compte de tous les facteurs intervenant dans l'expression de l'efficacite de collection de charge d'une jonction. Dans la deuxieme partie, ou des experiences d'irradiation des jonctions N-P ont ete effectuees avec une source de {sup 90}Sr- {sup 90}Y, on a signale l'interet particulier d'une jonction d'arseniure de gallium susceptible de travailler a des temperatures relativement elevees (voisines de 100 deg. C). La troisieme partie presente l'etude des defauts crees dans un cristal de

  3. Study of the local stability of a feedback control having rectifiers with a controlled grid; Etude de la stabilite locale d'un asservissement comportant des redresseurs a grille controlee

    Energy Technology Data Exchange (ETDEWEB)

    Katz, A

    1962-07-01

    The equivalence of a rectifier with a controlled grid and a sampled device is established. Then, the sampled servomechanism theory is applied to the study of the response and of the local stability of a feedback control having a rectifiers system charged by an inductance-resistance assembly, in the case of the permanent conduction. The case of a feedback control of the first order and then of the second order are studied. The expressions of the test and sampled responses with a sinusoidal input is given. (O.M.) [French] On etablit l'equivalence d'un redresseur a grille controlee et d'un dispositif echantillonne. On applique ensuite la theorie des servomecanismes echantillonnes a l'etude de la reponse et de la stabilite locale d'un asservissement comportant un systeme de redresseurs charges par un ensemble inductance-resistance, dans le cas de la conduction permanente. On etudie le cas d'un asservissement du premier, puis du second ordre. On indique egalement les expressions des reponses miree et echantillonnee a une entree sinusoidale. (auteur)

  4. Five-year outcome of a stroke cohort in Martinique, French West Indies: Etude Réalisée en Martinique et Centrée sur l'Incidence des Accidents vasculaires cérebraux, Part 2.

    Science.gov (United States)

    Chausson, Nicolas; Olindo, Stéphane; Cabre, Philippe; Saint-Vil, Martine; Smadja, Didier

    2010-04-01

    Limited information exists on stroke among black populations outside the United States and United Kingdom. Part 1 of the Etude Réalisée en Martinique et Centrée sur l'Incidence des Accidents vasculaires cérebraux (ERMANCIA) provided strong epidemiologic data on the incidence of first-ever stroke in a black Caribbean population and showed a 40% greater incidence of stroke in Martinique than in continental France. In ERMANCIA part 2, we evaluated the long-term outcomes of our cohort. Survivors of a first stroke from this prospective, community-based, stroke incidence study were reassessed at 5 years according to standardized procedures and criteria, including the modified Rankin scale, Barthel Index, Montgomery-Asberg Depression-Rating Scale, Mini-Mental State Examination, treatment compliance, and blood pressure control. Of the 293 survivors of the original 580 (50.5%) patients who were still alive 5 years after stroke, 262 (89.4%) were assessed. Among these survivors, 66.4% were functionally independent and 43% were completely autonomous for activities of daily living, but 25.8% were depressed and 58.9% were cognitively impaired. Only 50 of 170 (29.4%) of the hypertensive patients achieved their target blood pressure. These results highlight the very poor blood pressure control and the very high rate of cognitive impairment in Martinican patients after stroke. As a consequence, a poststroke prevention network was established in Martinique.

  5. Combined effects of lipid peroxidation and antioxidant status on carotid atherosclerosis in a population aged 59-71 y: The EVA Study. Etude sur le Vieillisement Artériel.

    Science.gov (United States)

    Bonithon-Kopp, C; Coudray, C; Berr, C; Touboul, P J; Fève, J M; Favier, A; Ducimetière, P

    1997-01-01

    There are few epidemiologic studies of the effects of lipid peroxidation and antioxidant status on atherosclerosis. The relation of lipid peroxidation evaluated by thiobarbituric acid-reactive substances (TBARS) and biological markers of antioxidant status to ultrasonographically assessed carotid atherosclerosis was examined from baseline data of a longitudinal study on cognitive and vascular aging (Etude sur le Vieillisement Artériel, the EVA Study). The study sample was composed of 1187 mean and women aged 59-71 y without any history of coronary artery disease or stroke. Ultrasound examination included measurements of intima-media thickness (IMT) on the common carotid arteries (CCAs) and at the site of plaques. After adjustment for conventional cardiovascular risk factors, erythrocyte vitamin E was significantly and negatively associated with CCA-IMT in both men and women whereas plasma selenium and carotenoids were not. No association was found between TBARS and CCA-IMT in either sex. However, TBARS were significantly higher in men with carotid plaques than in those without. This association was strengthened in men with concentrations of erythrocyte vitamin E, plasma selenium, and carotenoids below the lowest quartile. Our findings give some epidemiologic support to the hypothesis that lipid peroxidation and low antioxidant status are involved in the early phases of atherosclerosis.

  6. Study of filterable materials and protection instruments by the use of radioactive aerosols; Etude de materiaux filtrants et d'appareils de protection a l'aide des aerosols radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Billard; Chevalier; Pradel [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    Many filtration problems can be studied by means of radioactive aerosols. For the investigations described in this paper we have chosen the solid disintegration products of radon, the radioactive gas formed from radium, because of the facilities of generation and measurement it offers. Radon and its daughters are in fact always present in the atmosphere in sufficient concentration for certain tests. In order to improve the sensitivity of the measurements, radon from uranium ore can be used. The technique of measuring by counting {alpha} particles is rapid and easy to employ. We have thus been able to define a test for filterable substances, and to check filtering installation and individual protection instruments. (author) [French] Les aerosols radioactifs permettent d'etudier de nombreux problemes de filtration. Pour les etudes decrites dans ce document, nous avons choisi les produits solides de desintegration du radon, gaz radioactif forme a partir du radium en raison des facilites de generation et de mesure. Le radon et ses descendants sont, en effet, toujours presents dans l'atmosphere en concentration suffisante pour certains essais. Pour ameliorer la sensibilite des mesures, il suffit d'utiliser le radon provenant de minerai d'uranium. La technique de mesure par comptage des particules {alpha} est rapide et facile a mettre en oeuvre. Nous avons pu ainsi definir un test pour les substances filtrantes et controler les installations de filtration et des appareils de protection individuelle. (auteur)

  7. Study of the fluctuations of the partial and total radiative widths by neutron capture resonance method; Etude des fluctuations des largeurs radiatives partielles et totales par la capture des neutrons de resonance

    Energy Technology Data Exchange (ETDEWEB)

    Huynh, V.D. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-06-01

    Radiative capture experiments by neutron time-of-flight methods have been made for following studies: distribution of partial radiative widths, effects of correlation between different radiative transitions, fluctuations of total radiative widths {gamma}{sub {gamma}} from resonance to resonance, variation of {gamma}{sub {gamma}} with number of mass and the search for the existence of potential capture. Also, some other experiments with the use of neutron capture gamma-rays spectra have been investigated. (author) [French] Par la capture des neutrons de resonance dont les energies sont selectionnees a l'aide de la technique du temps de vol, differents types d'experiences ont ete realisees concernant les etudes des distributions des largeurs radiatives partielles, des effets de correlation entre differentes voies de desexcitation, de la fluctuation des largeurs radiatives totales {gamma}{sub {gamma}} de resonance a resonance, de la variation de la quantite {gamma}{sub {gamma}} en fonction du nombre de masse et de la mise en evidence de l'existence du processus de capture potentielle. Quelques autres applications de l'emploi du spectre de rayons gamma ont egalement ete presentees. (auteur)

  8. Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

  9. CSIR Technology Impact 1996

    CSIR Research Space (South Africa)

    CSIR

    1996-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  10. Resources, Technology, and Strategy

    DEFF Research Database (Denmark)

    Resources, Technology and Strategy brings together contributors from Europe, North America and Asia to consider the strategic relationship between technology and other resources, such as production capabilities, marketing prowess, finance and organisational culture. Throughout the book...

  11. Solar Thermal Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Pitsenbarger, J. [eds.

    1996-02-01

    Solar Thermal Energy Technology (PST) announces on a bimonthly basis the current worldwide research and development information that would expand the technology base required for the advancement of solar thermal systems as a significant energy resource.

  12. INFORMATION TECHNOLOGIES IN TOURISM

    OpenAIRE

    Radka Tosheva; Aleksandrina Gancheva

    2016-01-01

    In this article the focus is on the role of information technology in tourism, tourism business, electronic payments, software used by tourist companies, new technologies for online advertising and shopping, software for mobile devices.

  13. Technology in Residence.

    Science.gov (United States)

    Fox, Jordan

    1999-01-01

    Discusses the necessity for incorporating current technology in today's college residence halls to meet the more diverse and continued activities of its students. Technology addressed covers data networking and telecommunications, heating and cooling systems, and fire-safety systems. (GR)

  14. Technology Readiness Level Guidebook

    Science.gov (United States)

    2017-09-01

    This guidebook provides the necessary information for conducting a Technology Readiness Level (TRL) Assessment. TRL Assessments are a tool for determining the maturity of technologies and identifying next steps in the research process. This guidebook...

  15. Assisted Reproductive Technology (ART)

    Science.gov (United States)

    ... Share Facebook Twitter Pinterest Email Print Assisted Reproductive Technology (ART) ART refers to treatments and procedures that ... American Society for Reproductive Medicine. (2015). Assisted reproductive technologies: A guide for patients . Retrieved May 31, 2016, ...

  16. Genealogies of Modern Technology

    DEFF Research Database (Denmark)

    Riis, Søren

    2008-01-01

    Does modern technology differ from ancient technology and does it have a unique essence? This twofold question opens one of Martin Heidegger's most influential philosophical inquiries, The Question Concerning Technology. The answer Heidegger offers has inspired various critiques and appraisals from...... a vast number of contemporary scholars of technology.1 Heidegger's answer is traditionally thought to suggest a great difference between ancient and modern technology. However, by re-examining Heidegger's text, it is possible to discover previously ignored or misunderstood lines of thoughts that affirm...... a multi-stable interpretation of the origin of modern technology. In what follows, we shall see how The Question Concerning Technology in fact supports three different genealogies of modern technology...

  17. Technology Implementation Plan

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe

    The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential.......The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential....

  18. Crystal-Clear Technology.

    Science.gov (United States)

    Ondris-Crawford, Renate J.; And Others

    1993-01-01

    Provides diagrams to aid in discussing polymer dispersed liquid crystal (PDLC) technology. Equipped with a knowledge of PDLC, teachers can provide students with insight on how the gap between basic science and technology is bridged. (ZWH)

  19. Technology licensing in China

    DEFF Research Database (Denmark)

    Wang, Yuandi; Li-Ying, Jason; Chen, Jin

    2015-01-01

    We explore the landscape of technology licensing among Chinese entities in the period 2000–12, using a unique database on technological licensing from the State Intellectual Property Office of China. We find that: first, among Chinese licensee organizations, firms have dominated in terms of the n......We explore the landscape of technology licensing among Chinese entities in the period 2000–12, using a unique database on technological licensing from the State Intellectual Property Office of China. We find that: first, among Chinese licensee organizations, firms have dominated in terms...... of the number of licensed technologies; second, the geographical distribution of licensed technologies among the provinces has gradually reached a new quantitative balance; third, utility models are the most popular technologies to be licensed and the majority of technology licensing in China has been between...

  20. Environmental technology verification methods

    CSIR Research Space (South Africa)

    Szewczuk, S

    2016-03-01

    Full Text Available Environmental Technology Verification (ETV) is a tool that has been developed in the United States of America, Europe and many other countries around the world to help innovative environmental technologies reach the market. Claims about...

  1. Clean Air Technology Center

    Science.gov (United States)

    The Clean Air Technology Center provides resources for emerging and existing air pollution prevention and control technologies and provides public access to data and information on their use, effectiveness and cost.

  2. CSIR Technology Impact 1994

    CSIR Research Space (South Africa)

    CSIR

    1994-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  3. INFORMATION TECHNOLOGIES IN TOURISM

    Directory of Open Access Journals (Sweden)

    Radka Tosheva

    2016-12-01

    Full Text Available In this article the focus is on the role of information technology in tourism, tourism business, electronic payments, software used by tourist companies, new technologies for online advertising and shopping, software for mobile devices.

  4. Ship propulsion reactors technology

    International Nuclear Information System (INIS)

    Fribourg, Ch.

    2002-01-01

    This paper takes the state of the art on ship propulsion reactors technology. The french research programs with the corresponding technological stakes, the reactors specifications and advantages are detailed. (A.L.B.)

  5. Dismantling technologies trends

    International Nuclear Information System (INIS)

    Devaux, P.

    2009-01-01

    In this work dismantling technologies trends realized by the CEA are reviewed. There following technologies are presented: Data acquisition from facilities; Scenario studies; Remote handling and carriers; Dismantling techniques; Decontamination.

  6. TECHNOLOGICAL IMPLEMENTATION PLAN

    DEFF Research Database (Denmark)

    Bellini, Anna

    2004-01-01

    This document has the purpose to describe the technological implementation plan in the IDEAL project.......This document has the purpose to describe the technological implementation plan in the IDEAL project....

  7. CSIR Technology Impact 1993

    CSIR Research Space (South Africa)

    CSIR

    1993-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  8. CSIR Technology Impact 2000

    CSIR Research Space (South Africa)

    CSIR

    2000-01-01

    Full Text Available This millennium issue of Technology Impact celebrates the CSIR's contributions during the transitional 1999/2000 year. It presents a rich canvas portrays technology solutions and information which have touched the lives of people both within...

  9. CSIR Technology Impact 1999

    CSIR Research Space (South Africa)

    CSIR

    1999-01-01

    Full Text Available This issue of Technology Impact offers a brief snapshot of CSIR activities during the year under review by highlighting a number of innovative projects and initiatives in these areas. It presents a rich canvas portrays technology solutions...

  10. Fusion technology (FT)

    International Nuclear Information System (INIS)

    1978-01-01

    The annual report of tha fusion technology (FT) working group discusses the projects carried out by the participating institutes in the fields of 1) fuel injection and plasma heating, 2) magnetic field technology, and 3) systems investigations. (HK) [de

  11. ADVANTAGES OF GREEN TECHNOLOGY

    OpenAIRE

    Ghanshyam Das Soni

    2017-01-01

    Technology is application of knowledge to practical requirements. Green technologies encompass various aspects of technology which help us reduce the human impact on the environment and create ways of sustainable development. Social equitability, economic feasibility and sustainability are the key parameters for green technologies. Today the environment is racing towards the tipping point at which we would have done permanent irreversible damage to the planet earth. Our current actions are pu...

  12. New Mobile Technologies

    DEFF Research Database (Denmark)

    Tan, Su-En; Henten, Anders

    2006-01-01

    This paper takes a look at Clayton Christensen 's theory of disruptive technologies and how Christensen's theory relates to other innovation theories. It also proposes a new layer of analysis to this theory to better link the technology analysis to the market analysis of any given technology...... product. This layer suggests that complementarity and substitutability are important criteria for technologies to be market disruptions or sustaining changes....

  13. Emerging Technologies for Telemedicine

    Science.gov (United States)

    Minh, Cao Duc; Antoku, Yasuaki; Torata, Nobuhiro; Kudo, Kuriko; Okamura, Koji; Nakashima, Naoki; Tanaka, Masao

    2012-01-01

    This paper focuses on new technologies that are practically useful for telemedicine. Three representative systems are introduced: a Digital Video Transport System (DVTS), an H.323 compatible videoconferencing system, and Vidyo. Based on some of our experiences, we highlight the advantages and disadvantages of each technology, and point out technologies that are especially targeted at doctors and technicians, so that those interested in using similar technologies can make appropriate choices and achieve their own goals depending on their specific conditions. PMID:22563284

  14. Developments in lubricant technology

    CERN Document Server

    Srivastava, S P

    2014-01-01

    Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

  15. Rationalizing social technologies

    OpenAIRE

    V V Scherbina

    2016-01-01

    The article considers the problem of defining the specifics and types of social technologies (hereinafter ST). The author pursues the following objectives: first, to clarify the specific features of social technologies; second, to identify the grounds for classifying the existing types of social technologies; third, to describe the basic characteristics (functions, tasks, tools, the scope and limits of application, and ideological bases) of social technologies; fourth, to identify the basic f...

  16. NASA Astrophysics Technology Needs

    Science.gov (United States)

    Stahl, H. Philip

    2012-01-01

    July 2010, NASA Office of Chief Technologist (OCT) initiated an activity to create and maintain a NASA integrated roadmap for 15 key technology areas which recommend an overall technology investment strategy and prioritize NASA?s technology programs to meet NASA?s strategic goals. Science Instruments, Observatories and Sensor Systems(SIOSS) roadmap addresses technology needs to achieve NASA?s highest priority objectives -- not only for the Science Mission Directorate (SMD), but for all of NASA.

  17. Consuming technologies - developing routines

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2008-01-01

    technologies and in this article these processes will be investigated from three different perspectives: an historical perspective of how new technologies have entered homes, a consumer perspective of how both houses and new technologies are purchased and finally, as the primary part of the article, a user...... perspective of how routines develop while these technologies are being used. In the conclusion these insights are discussed in relation to possible ways of influencing routines....

  18. Magnetic fusion technology

    CERN Document Server

    Dolan, Thomas J

    2014-01-01

    Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: ? magnet systems, ? plasma heating systems, ? control systems, ? energy conversion systems, ? advanced materials development, ? vacuum systems, ? cryogenic systems, ? plasma diagnostics, ? safety systems, and ? power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.

  19. Frontiers in biochip technology

    National Research Council Canada - National Science Library

    Xing, Wan-Li; Cheng, Jing

    2006-01-01

    ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . Haiching Ma, Yuan Wang, Amy S. Pomaybo, and Connie Tsai 2. Improvement of Microarray Technologies for Detecting Single Nucleotide Mismatch...

  20. Conducting a Technology Audit

    Science.gov (United States)

    Flaherty, William

    2011-01-01

    Technology is a critical component in the success of any high-functioning school district, thus it is important that education leaders should examine it closely. Simply put, the purpose of a technology audit is to assess the effectiveness of the technology for administrative or instructional use. Rogers Public Schools in Rogers, Arkansas, recently…

  1. Selecting Security Technology Providers

    Science.gov (United States)

    Schneider, Tod

    2009-01-01

    The world of security technology holds great promise, but it is fraught with opportunities for expensive missteps and misapplications. The quality of the security technology consultants and system integrators one uses will have a direct bearing on how well his school masters this complex subject. Security technology consultants help determine…

  2. Sex, Technology and Morality.

    Science.gov (United States)

    Case, Verna; And Others

    1986-01-01

    Provides an overview of the course "Sex, Technology, and Morality" which focuses on the human reproductive process and examines the advances in reproductive technology. The course emphasizes the social, political, and ethical implications of actual and possible technologies associated with human reproduction. (ML)

  3. Technological Style is History

    DEFF Research Database (Denmark)

    Blond, Lasse

    The effort to comprehend innovation across cultures and time highlights the importance of the explicating factors external to technology. It becomes relevant to nuance or differentiate the understanding of social and cultural responses to adopted technologies by recognizing that technology shapes...

  4. JAPAN'S TECHNOLOGY TRADE

    OpenAIRE

    Hagiwara, Taiji

    1994-01-01

    Japan's technology balance of trade has improved over the last twenty years. The position of Japan is examined through (1) comparison with other OECD countries, (2) the historical change in Japan's technology trade at the industry level, (3) Toshiba's technology trade as a typical case. The conclusion is that Japan is still behind the frontier of innovation.

  5. Power Technologies Data Book

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, L.

    2002-09-01

    This report, prepared by NREL's Energy Analysis Office, includes up-to-date information on power technologies, including complete technology profiles. The data book also contains charts on electricity restructuring, power technology forecasts and comparisons, electricity supply, electricity capability, electricity generation, electricity demand, prices, economic indicators, environmental indicators, conversion factors, and selected congressional questions and answers.

  6. Exploring Technology Education.

    Science.gov (United States)

    Van Duzer, Eric

    Modular middle school technology programs, generically called Exploring Technology Education (ETE) courses, are described and analyzed to determine their strengths and weaknesses and their appropriate role in middle school curricula. Interviews were conducted with teachers, officers of the Exploring Technology Educators Association, vendors and…

  7. Advanced manufacturing: Technology diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-12-01

    In this paper we examine how manufacturing technology diffuses rom the developers of technology across national borders to those who do not have the capability or resources to develop advanced technology on their own. None of the wide variety of technology diffusion mechanisms discussed in this paper are new, yet the opportunities to apply these mechanisms are growing. A dramatic increase in technology diffusion occurred over the last decade. The two major trends which probably drive this increase are a worldwide inclination towards ``freer`` markets and diminishing isolation. Technology is most rapidly diffusing from the US In fact, the US is supplying technology for the rest of the world. The value of the technology supplied by the US more than doubled from 1985 to 1992 (see the Introduction for details). History shows us that technology diffusion is inevitable. It is the rates at which technologies diffuse to other countries which can vary considerably. Manufacturers in these countries are increasingly able to absorb technology. Their manufacturing efficiency is expected to progress as technology becomes increasingly available and utilized.

  8. Optimizing Computer Technology Integration

    Science.gov (United States)

    Dillon-Marable, Elizabeth; Valentine, Thomas

    2006-01-01

    The purpose of this study was to better understand what optimal computer technology integration looks like in adult basic skills education (ABSE). One question guided the research: How is computer technology integration best conceptualized and measured? The study used the Delphi method to map the construct of computer technology integration and…

  9. Creative Technology and Rap

    Science.gov (United States)

    Ch'ien, Evelyn

    2011-01-01

    This paper describes how a linguistic form, rap, can evolve in tandem with technological advances and manifest human-machine creativity. Rather than assuming that the interplay between machines and technology makes humans robotic or machine-like, the paper explores how the pressure of executing artistic visions using technology can drive…

  10. Technology in Education

    Science.gov (United States)

    Roden, Kasi

    2011-01-01

    This paper was written to support a position on using technology in education. The purpose of this study was to support the use of technology in education by synthesizing previous research. A variety of sources including books and journal articles were studied in order to compile an overview of the benefits of using technology in elementary,…

  11. Connecting Technology and Learning.

    Science.gov (United States)

    Woolley, Ginny

    1998-01-01

    Teacher training programs must go beyond "how-to" workshops to facilitate understanding about technology's relationship to learning. An International School of Bangkok training program transforms teachers into learners immersed in technology-rich environments. The process involves seven phases: getting ready, learning about technology,…

  12. Materials and technology

    International Nuclear Information System (INIS)

    Gockel, E.; Simon, J.

    1998-01-01

    New materials and the processes for their economical fabrication and use are the factors which drive innovation in totally different fields of technology, such as energy engineering, transport, and information. But they also open up new fields of technology such as micro systems or medicine technology. Five out of a total of twelve articles are separately listed in the ENERGY database [de

  13. Lucas Heights technology park

    International Nuclear Information System (INIS)

    1987-01-01

    The proposed Lucas Heights Technology Park will pound together the applied research programs of Government, tertiary and industry sectors, aiming to foster technology transfer particularly to the high-technology manufacturing industry. A description of the site is given along with an outline of the envisaged development, existing facilities and expertise. ills

  14. Teaching Information Technology Law

    Science.gov (United States)

    Taylor, M. J.; Jones, R. P.; Haggerty, J.; Gresty, D.

    2009-01-01

    In this paper we discuss an approach to the teaching of information technology law to higher education computing students that attempts to prepare them for professional computing practice. As information technology has become ubiquitous its interactions with the law have become more numerous. Information technology practitioners, and in particular…

  15. E-Business Technologies

    OpenAIRE

    Carmen TIMOFTE

    2007-01-01

    Internet technologies have revolutionized the business world by creating a global online marketplace. Appropriate understanding for the technologies and the impact of different design choices of technologies (including the Internet and open systems) dramatically affects both functional and non-functional aspects of the e-business solution.

  16. Education Technology Success Stories

    Science.gov (United States)

    West, Darrell M.; Bleiberg, Joshua

    2013-01-01

    Advances in technology are enabling dramatic changes in education content, delivery, and accessibility. Throughout history, new technologies have facilitated the exponential growth of human knowledge. In the early twentieth century, the focus was on the use of radios in education. But since then, innovators have seen technology as a way to improve…

  17. Education Technology Transformation

    Science.gov (United States)

    Kennedy, Mike

    2012-01-01

    Years ago, as personal computers and other technological advancements began to find their way into classrooms and other educational settings, teachers and administrators sought ways to use new technology to benefit students. The potential for improving education was clear, but the limitations of the available education technology made it difficult…

  18. Moralizing Food Technology

    DEFF Research Database (Denmark)

    Coff, Christian Eyde

    2015-01-01

    Food technologies are common on many levels in society and used by both food professionals and consumers. Food technologies are not neutral. They inform and shape the behaviour of people. This paper presents a theoretical framework for analysing the mediating role of food technology and its influ...

  19. Green technology in Taiwan

    International Nuclear Information System (INIS)

    Runderkamp, D.

    2010-01-01

    Taiwan is striving for leadership in the field of green Technologies. Solar cells and Light Emitting Diodes (LED) are the best examples of successful Taiwanese green technologies. Electronic vehicles and smart grids are giving new impetus to the Taiwanese export of high-quality technology. [nl

  20. From Information Technologies to Knowledge Technologies?

    OpenAIRE

    Auzelle, Jean-Philippe; Mayer, Frédérique; Lhoste, Pascal

    2006-01-01

    In spite of the large variety of technological means available today to obtain and share knowledge needed by the progress of our Society, the relation between the knowledge produced and the knowledge required is not sufficiently facilitated. This paper aims to provide a partial answer to this issue. It proposes a NIAM/ORM formalization of exchanges between producers and users of knowledge. The resulting model is used to analyse and to discuss the deficiencies of the current technologies as we...

  1. Contribution to the study of porous or very finely divided alumina; Contribution a l'etude des alumines poreuses ou tres finement divisees

    Energy Technology Data Exchange (ETDEWEB)

    Juillet, F. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-12-15

    deficit en aluminium apres traitement a 700 deg C entrainant l'apparition des proprietes de semi-conducteur n puis p. Une alumine cristallisee delta sous forme do grains spheriques non poreux soumise a une compression de 1 a 5 t/cm{sup 2} presente egalement une non-stoechiometrie a deficit d'oxygene ou d'aluminium. Aucun de ces phenomenes n'a pu etre enregistre avec l'echantillon non soumis a la compression. L'influence favorable de l'oxygene dans le processus de recristallisation de l'alumine amorphe et dans la transformation delta-alpha de l'alumine cristallisee a ete mise en evidence, De plus, les contraintes developpees par compression de l'alumine delta permettent sa transformation en phase alpha dans l'air a une temperature inferieure a celle necessaire pour observer le meme phenomene dans l'alumine delta non comprimee. L'afumine amorphe subit un frittage intragranulaire des 500 deg C et un frittage intergranulaire a 1 000 deg C. Seul ce dernier s'observe pour l'alumine en grains spheriques. Pour cette derniere les contraintes developpees par la compression abaissent de 100 deg C le seuil de ce frittage par rapport a la temperature necessaire pour observer ce phenomene avec l'echantillon non comprime. Le taux de frittage d'un comprime d'alumine cristallisee depend, en plus, de la vitesse de la mise en temperature. L'ensemble de cette etude tend a montrer que des proprietes nouvelles, ou du moins inhabituelles de l'etat solide peuvent etre observees s'il est fait appel a des solides desorganises ou encore cristallises mais dotes d'une importante surface specifique et soumis a des contraintes. (auteur)

  2. Brief: Managing computing technology

    International Nuclear Information System (INIS)

    Startzman, R.A.

    1994-01-01

    While computing is applied widely in the production segment of the petroleum industry, its effective application is the primary goal of computing management. Computing technology has changed significantly since the 1950's, when computers first began to influence petroleum technology. The ability to accomplish traditional tasks faster and more economically probably is the most important effect that computing has had on the industry. While speed and lower cost are important, are they enough? Can computing change the basic functions of the industry? When new computing technology is introduced improperly, it can clash with traditional petroleum technology. This paper examines the role of management in merging these technologies

  3. Applied Semantic Web Technologies

    CERN Document Server

    Sugumaran, Vijayan

    2011-01-01

    The rapid advancement of semantic web technologies, along with the fact that they are at various levels of maturity, has left many practitioners confused about the current state of these technologies. Focusing on the most mature technologies, Applied Semantic Web Technologies integrates theory with case studies to illustrate the history, current state, and future direction of the semantic web. It maintains an emphasis on real-world applications and examines the technical and practical issues related to the use of semantic technologies in intelligent information management. The book starts with

  4. Transferring Technology to Industry

    Science.gov (United States)

    Wolfenbarger, J. Ken

    2006-01-01

    This slide presentation reviews the technology transfer processes in which JPL has been involved to assist in transferring the technology derived from aerospace research and development to industry. California Institute of Technology (CalTech), the organization that runs JPL, is the leading institute in patents for all U.S. universities. There are several mechanisms that are available to JPL to inform industry of these technological advances: (1) a dedicated organization at JPL, National Space Technology Applications (NSTA), (2) Tech Brief Magazine, (3) Spinoff magazine, and (4) JPL publications. There have also been many start-up organizations and businesses from CalTech.

  5. Incubation of NASA technology

    Science.gov (United States)

    Olson, Richard

    1996-03-01

    Traditionally, government agencies have sought to transfer technology by licensing to large corporations. An alternative route to commercialization is through the entrepreneurial process: using government technology to assist new businesses in the environment of a business incubator. The NASA Ames Technology Commercialization Center, in Sunnyvale, California, is a business incubator used to commercialize NASA technology. In operation almost two years, it has helped twenty new, high technology ventures. Ice Management Systems is one of these. The Center is funded by NASA and operated by IC2, a think-tank associated with the University of Texas at Austin.

  6. Encouraging environmentally strategic technologies

    International Nuclear Information System (INIS)

    Heaton, G.R.

    1994-01-01

    Having moved beyond its initial absorption with controlling new technology, environmental policy today must focus more strongly on promoting the development and adoption of new technologies. World Resource Institute's (WRI) ongoing study of 'environmentally strategic technology' is addressed to this fundamental policy issue. The study proposes criteria for identifying such technology, offers a specific list, suggests the kinds of public policy changes necessary to encourage their development and finally presents a comparison of critical technology lists (from the White House, the European Community, Japan and the US Department of Defense). (TEC)

  7. Better Learning Through Technology

    Science.gov (United States)

    Mathieu, R. D.; National InstituteScience Education, College Level-One Team

    2000-12-01

    The Learning Through Technology (LT2) resource is designed to help college Science, Mathematics, Engineering and Technology (SMET) instructors: - understand why and how they should use technology-enhanced learning strategies; - shape the powerful emerging technologies into learning tools that better prepare college students for the 21st century; and - provide all their students more experience with, and a better appreciation for, SMET as a living enterprise. The LT2 website includes case studies of learning technology innovations at a variety of post-secondary institutions. Personal narratives of faculty and students cover virtually every logistical, technological, inter-personal, and political issue involved in adapting learning technologies into courses or curricula. The site also includes a wide array of lively first-person vignettes about learning technology experiences from around the country. Frequently Asked Questions is a quick stop for opinions, advice, and bits of wisdom from experienced learning technology users. Finally, the Team is developing user-friendly evaluation resources to help faculty assess the success of learning technologies in improving student learning. The LT2 site is an element of the NISE website "Innovations in SMET Education". This site is intended to help college faculty meet multiple challenging goals including: educating all students to be scientifically literate in a technological society, developing the ranks of future scientists and skilled technicians, and preparing K-12 science and math teachers. The "Innovations in SMET Education" website can be found at www.wcer.wisc.edu/nise/cl1 .

  8. Technology in geriatrics.

    Science.gov (United States)

    Pilotto, Alberto; Boi, Raffaella; Petermans, Jean

    2018-03-13

    Recently, the interest of industry, government agencies and healthcare professionals in technology for aging people has increased. The challenge is whether technology may play a role in enhancing independence and quality of life and in reducing individual and societal costs of caring. Information and communication technologies, i.e. tools aimed at communicating and informing, assistive technologies designed to maintain older peoples' independence and increasing safety, and human-computer interaction technologies for supporting older people with motility and cognitive impairments as humanoid robots, exoskeletons, rehabilitation robots, service robots and companion-type are interdisciplinary topics both in research and in clinical practice. The most promising clinical applications of technologies are housing and safety to guarantee older people remaining in their own homes and communities, mobility and rehabilitation to improve mobility and gait and communication and quality of life by reducing isolation, improve management of medications and transportation. Many factors impair a broad use of technology in older age, including psychosocial and ethical issues, costs and fear of losing human interaction. A substantial lack of appropriate clinical trials to establish the clinical role of technologies to improve physical or cognitive performances and/or quality of life of subjects and their caregivers may suggest that the classical biomedical research model may not be the optimal choice to evaluate technologies in older people. In conclusion, successful technology development requires a great effort in interdisciplinary collaboration to integrate technologies into the existing health and social service systems with the aim to fit into the older adults' everyday life.

  9. Technology Museums in Denmark

    DEFF Research Database (Denmark)

    Søndergaard, Morten Karnøe

    2012-01-01

    within wind power technology. Finally special attention is devoted to the Danish Technological Museum. A museum which is the oldest and most elaborate of all the technology museums. The museum covers virtually every technological breakthrough with any relevance in a Danish section, with a special focus......This article presents an exhibit review of some of the major technology museums in Denmark. First comes an introduction to the Danish museum ”landscape”. Second a total of six museums and their technology focused exhibits are presented. Among the museums are the Fisheries and Maritime Museum...... in Esbjerg, housing one of the most impressive and representative exhibitions on the technology behind the strong Danish maritime sector. Another museum being mentioned is the Energy Museum, which covers the background for some of the major breakthroughs performed in Denmark within this area; particularly...

  10. Technology and Global Change

    Science.gov (United States)

    Grübler, Arnulf

    2003-10-01

    Technology and Global Change describes how technology has shaped society and the environment over the last 200 years. Technology has led us from the farm to the factory to the internet, and its impacts are now global. Technology has eliminated many problems, but has added many others (ranging from urban smog to the ozone hole to global warming). This book is the first to give a comprehensive description of the causes and impacts of technological change and how they relate to global environmental change. Written for specialists and nonspecialists alike, it will be useful for researchers and professors, as a textbook for graduate students, for people engaged in long-term policy planning in industry (strategic planning departments) and government (R & D and technology ministries, environment ministries), for environmental activists (NGOs), and for the wider public interested in history, technology, or environmental issues.

  11. Sensor technology foresight

    DEFF Research Database (Denmark)

    Andersen, Per Dannemand; Jørgensen, Birte Holst; Rasmussen, Birgitte

    2001-01-01

    , robustness, dispensability, and the abilityto be self-calibrating. Future sensors are expected to be integrated systems with multiple applications. The market sectors most influenced by new sensor technology change from topic to topic. But a general conclusion is that health care is the marketsector most......The Sensor Technology Center A/S (STC) in co-operation with Risoe National Laboratory has carried out a sensor technology foresight in order to strengthen a strategic outlook on sensor technology. The technology foresight (with a timeframe of 2000 to2015) has been performed in the period October...... 2000 - September 2001. The conclusions of the sensor technology report are based on 1) a scanning of existing forward looking literature on sensor technology, 2) a number of workshops with Danish andinternational participants and 3) an international survey with 174 respondents. Half of the respondents...

  12. Promoting renewable energy technologies

    International Nuclear Information System (INIS)

    Grenaa Jensen, S.

    2004-06-01

    Technologies using renewable energy sources are receiving increasing interest from both public authorities and power producing companies, mainly because of the environmental advantages they procure in comparison with conventional energy sources. These technologies can be substitution for conventional energy sources and limit damage to the environment. Furthermore, several of the renewable energy technologies satisfy an increasing political goal of self-sufficiency within energy production. The subject of this thesis is promotion of renewable technologies. The primary goal is to increase understanding on how technological development takes place, and establish a theoretical framework that can assist in the construction of policy strategies including instruments for promotion of renewable energy technologies. Technological development is analysed by through quantitative and qualitative methods. (BA)

  13. The Human Technology

    DEFF Research Database (Denmark)

    Fausing, Bent

     Bent Fausing  "The Humane Technology", abstract (for The Two Cultures: Balancing Choices and Effects Oxford University July 20-26, 2008). The paper will investigate the use of technology in everyday aesthetics such as TV-commercials for mobile phones for Nokia, which slogan is, as it is well known......, "Nokia - connecting people". Which function does this technology get in narratives, images, interactions and affects here?      The mobile phone and its digital camera are depicted as being able to make a unique human presence and interaction. The medium, the technology is a necessary helper to get...... towards this very special and lost humanity. Without the technology, no special humanity is the prophecy. This personification or anthropomorphism is important for the branding of new technology. The technology is seen as creating a technotranscendens towards a more qualified humanity, which is in contact...

  14. Technology Empowerment: Security Challenges.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Drake Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Backus, George A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Wendell [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nelson, Thomas R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Skocypec, Russell D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    Technology empowerment” means that innovation is increasingly accessible to ordinary people of limited means. As powerful technologies become more affordable and accessible, and as people are increasingly connected around the world, ordinary people are empowered to participate in the process of innovation and share the fruits of collaborative innovation. This annotated briefing describes technology empowerment and focuses on how empowerment may create challenges to U.S. national security. U.S. defense research as a share of global innovation has dwindled in recent years. With technology empowerment, the role of U.S. defense research is likely to shrink even further while technology empowerment will continue to increase the speed of innovation. To avoid falling too far behind potential technology threats to U.S. national security, U.S. national security institutions will need to adopt many of the tools of technology empowerment.

  15. JPRS Report, Science & Technology, Japan

    Science.gov (United States)

    1988-10-05

    This is Japan Report with Science and Technology. It contains the issues with different topics on biotecnology , defense industry, nuclear engineering, Marine technology, science and technology policy.

  16. Contribution to the experimental survey of the nuclear isomerism. Application of the deferred coincidences method to research and to the survey of metastable states of short period; Contribution a l'etude experimentale de l'isomerie nucleaire. Application de la methode des coincidences differees a la recherche et a l'etude d'etats metastables de periode courte

    Energy Technology Data Exchange (ETDEWEB)

    Ballini, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1953-06-15

    transitions qu'ils subissent, lorsqu'elles donnent naissance a des especes nucleaires mieux connues: parmi ces transitions figurent les transitions isomeriques. Le but de ce travail est l'etude des transitions isomeriques a partir d'etats metastables de periode courte, comprise dans le domaine de la microseconde a quelques millisecondes. La methode des coincidences differees a ete mise au point et appliquee dans ce but en utilisant les avantages des selecteurs a plusieurs canaux, sous deux aspects principaux ou l'appareil a plusieurs canaux etait soit un selecteur de temps, soit un selecteur d'amplitudes. Cette methode a servi a etudier le fonctionnement de compteurs Geiger-Muller et a mesurer avec precision la periode de {sup 181}Ta{sup *} dans des conditions experimentales variees. La valeur adoptee est 17,2 {+-} 0,2 {mu}s. Ce travail a aussi trouve une application pratique immediate a la mise en evidence de quantites tres faibles de hafnium dans le zirconium, dont il constitue une impurete tenace et difficile a analyser par les moyens ordinaires. (M.B.)

  17. Study of atmospheric tritium transfers in lettuce: kinetic study, equilibrium and organic incorporation during a continuous atmospheric exposure; Etude des transferts du tritium atmospherique chez la laitue: Etude cinetique, etat d'equilibre et integration du tritum sous forme organique lors d'une exposition atmospherique continue

    Energy Technology Data Exchange (ETDEWEB)

    Boyer, C.

    2009-11-30

    This thesis has explored the mechanisms of tritium 'absorption and incorporation in a human-consumed plant, lettuce (Lactuca sativa L.), due to atmospheric exposure. Foliar uptake appears to play a key role in absorption of tritium as tissue free water tritium. Whatever the development stage and the light conditions, the specific activity in tissue free water reaches that of water vapour in air in several hours. The specific activity ratio is then about 0, 4. The time to reach equilibrium in soil is over 24 hours in most cases: the specific activity ratio ranges then 0, 01 to 0, 26. Incorporation rate of tissue free water tritium as organically-bound tritium has been estimated to 0, 13 to 0, 16 % h-l in average over the growing period of the plant, but marked variations are observed during growth. In particular, a significant increase appeared at the exponential growth stage. Deposition and diffusion of tritium in soil lead to significant OBT activities in soil. Results globally indicate equilibrium between the different environmental compartments (air, soil, plant). However, some experiments have revealed high OBT concentrations regarding atmospheric level exposure and ask for a possible phenomenon of local tritium accumulation in OBT for particular conditions of exposure. (author) [French] Ce travail de these a concerne l'etude des phenomenes d'absorption et d'incorporation sous forme organique du tritium dans un vegetal de consommation courante, la laitue (Lactuca sativa L.), en reponse a une exposition atmospherique. Il apparait que la voie foliaire joue un role primordial dans l'absorption du tritium au sein de l'eau tissulaire des plants. Quels que soient le stade de developpement des plants et les conditions d'eclairement, le temps necessaire pour atteindre l'equilibre des concentrations dans l'eau libre et dans la vapeur d'eau de l'air est de plusieurs heures; le rapport des concentrations est alors de

  18. Technology transfer 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    This document, Technology Transfer 94, is intended to communicate that there are many opportunities available to US industry and academic institutions to work with DOE and its laboratories and facilities in the vital activity of improving technology transfer to meet national needs. It has seven major sections: Introduction, Technology Transfer Activities, Access to Laboratories and Facilities, Laboratories and Facilities, DOE Office, Technologies, and an Index. Technology Transfer Activities highlights DOE`s recent developments in technology transfer and describes plans for the future. Access to Laboratories and Facilities describes the many avenues for cooperative interaction between DOE laboratories or facilities and industry, academia, and other government agencies. Laboratories and Facilities profiles the DOE laboratories and facilities involved in technology transfer and presents information on their missions, programs, expertise, facilities, and equipment, along with data on whom to contact for additional information on technology transfer. DOE Offices summarizes the major research and development programs within DOE. It also contains information on how to access DOE scientific and technical information. Technologies provides descriptions of some of the new technologies developed at DOE laboratories and facilities.

  19. Technology '90

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

  20. The Ultimate Technology

    DEFF Research Database (Denmark)

    Riis, Søren

    2013-01-01

    One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However, by reinterp......One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However......, by reinterpreting his notion of "modern technology," this article shows how it is possible to philosophically assess living technologies and to recognize ways in which Heidegger anticipated this phenomenon with his notion of cybernetics. The interpretation elucidates the fundamental process of technology becoming...... living and simultaneously presents living technology as the ultimate technology. The thesis of this article is that living technology is not just one more technology; rather, it is the perfection of technology as understood by Aristotle. Aristotle's thinking is in this way a key example of a profound...

  1. Technology and teen drivers.

    Science.gov (United States)

    Lee, John D

    2007-01-01

    The rapid evolution of computing, communication, and sensor technology is likely to affect young drivers more than others. The distraction potential of infotainment technology stresses the same vulnerabilities that already lead young drivers to crash more frequently than other drivers. Cell phones, text messaging, MP3 players, and other nomadic devices all present a threat because young drivers may lack the spare attentional capacity for vehicle control and the ability to anticipate and manage hazards. Moreover, young drivers are likely to be the first and most aggressive users of new technology. Fortunately, emerging technology can also support safe driving. Electronic stability control, collision avoidance systems, intelligent speed adaptation, and vehicle tracking systems can all help mitigate the threats to young drivers. However, technology alone is unlikely to make young drivers safer. One promising approach to tailoring technology to teen drivers is to extend proven methods for enhancing young driver safety. The success of graduated drivers license programs (GDL) and the impressive safety benefit of supervised driving suggest ways of tailoring technology to the needs of young drivers. To anticipate the effects of technology on teen driving it may be useful to draw an analogy between the effects of passengers and the effects of technology. Technology can act as a teen passenger and undermine safety or it can act as an adult passenger and enhance safety. Rapidly developing technology may have particularly large effects on teen drivers. To maximize the positive effects and minimize the negative effects will require a broad range of industries to work together. Ideally, vehicle manufacturers would work with infotainment providers, insurance companies, and policy makers to craft new technologies so that they accommodate the needs of young drivers. Without such collaboration young drivers will face even greater challenges to their safety as new technologies emerge.

  2. [Earth Science Technology Office's Computational Technologies Project

    Science.gov (United States)

    Fischer, James (Technical Monitor); Merkey, Phillip

    2005-01-01

    This grant supported the effort to characterize the problem domain of the Earth Science Technology Office's Computational Technologies Project, to engage the Beowulf Cluster Computing Community as well as the High Performance Computing Research Community so that we can predict the applicability of said technologies to the scientific community represented by the CT project and formulate long term strategies to provide the computational resources necessary to attain the anticipated scientific objectives of the CT project. Specifically, the goal of the evaluation effort is to use the information gathered over the course of the Round-3 investigations to quantify the trends in scientific expectations, the algorithmic requirements and capabilities of high-performance computers to satisfy this anticipated need.

  3. Technology transfer - the role of AEA Technology

    International Nuclear Information System (INIS)

    Hughes, A.E.; Bullough, R.; Mason, J.P.

    1989-01-01

    This paper concentrates mostly on examples of spin offs which have arisen from the more basic research carried out by the AEA. However, it should not be inferred from this that the only examples of successful technology transfer by the AEA are of a similar, often unforeseen nature. The most outstanding example of technology transfer by the AEA must surely be that achieved through the applied research which has enabled the establishment of a successful civil nuclear power programme in the UK. The natural transfer of technology here, achieved by virtue of the unique bridging position of the AEA with respect to universities and the nuclear industry, means that its success can easily be overlooked; to do so would be a mistake. However, by including spin off examples, we hope to illustrate how the AEA has also succeeded in bridging to more difficult areas where the special relationship which it shares with the nuclear industry is absent. (author)

  4. Water Technology Lecture 1: Introducing Water Technology

    OpenAIRE

    Gray, Nicholas Frederick

    2017-01-01

    This is a full set of PowerPoint lectures for a course in Water Technology currently given at Trinity College, University of Dublin by professor N.F. Gray. The lectures cover all aspects of water and wastewater treatment and are available for use to lecturers or those interested in the subject. The lecture series is to be used in conjunction with the new textbook ?Water Science and Technology? (4th edition) published by CRC Press in 2017. Lecture 1 is an introduction to the water indust...

  5. Technology Matters - When new technology reshape innovation

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...... observed through these interviews that product configuration systems are being implemented to solve a particular problem only later to become a significant part of business processes. Product configuration systems over time become a central element when innovating new products....

  6. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness......As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

  7. Use of Payment Technology

    DEFF Research Database (Denmark)

    Xiao, Xiao; Hedman, Jonas; Runnemark, Emma

    2015-01-01

    Drawing on the theory of consumption value, this research-in-progress strives to provide a theoretical explanation of payment technology use by investigating the relationship between consumers’ perceptions of different consumption values associated with a certain payment technology and their choice...... to use the technology. We conducted the study in the context of Denmark, a Northern European country, with three well established payment technologies: cash, payment cards, and Internet banking. Following a focus group of identifying and defining four types of consumption values associated with each...... payment technology, a survey was then conducted by a national statistics agency in the country. Preliminary results have shown that different consumption values matter for the use of different payment technologies. The findings will potentially contribute to a better understanding of consumer payment...

  8. Buildings Energy Technology; (USA)

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. (eds.)

    1991-01-01

    Buildings Energy Technology (BET) announces on a monthly basis the current worldwide information available on the technology required for economic energy conservation in buildings and communities. Each issue of BET also will include an article presenting a program overview or highlighting a current energy conservation technology project of DOE's Office of Building Technologies (OBT) plus a listing of scheduled meetings of interest. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database (EDB) during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency's Energy Technology Data Exchange or government-to-government agreements.

  9. Nuclear technology and beyond

    International Nuclear Information System (INIS)

    Akiyama, Mamoru

    1997-01-01

    After the confrontation of East and West, and the problem of North and South, we are now facing the era of Globalization in the presence of twenty-first century. Tracing the history of civilization, human being has progressed along with the accumulation of experience, and the development of science and technology. Science and technology bloomed in modern ages, especially, energy technology showed the giant leap in this century. Nuclear science and technology has been developed for peaceful purposes, and for the benefit of humanity. As a result, today, its progress led nuclear science and technology to have the great applicability to the development of the society. Toward the twenty-first century and Globalization, the science and technology developed in nuclear field is hoped to play a great contribution in various area of the society. (author)

  10. Everyday Struggels with Technology

    DEFF Research Database (Denmark)

    Mahnke, Martina; Schwartz, Sander Andreas

    2017-01-01

    Technology has not only become an integral part of people’s lives but also of people’s everyday struggles. Struggles with technology are complex in nature; we tend to not only struggle with their basic functions but also with how they make us feel. During the course of our life we tend to master...... and struggle with technology in different ways. This struggle has been studied in relation to media literacy (Livingstone, 2004), to domestication theory (Silverstone et al. 1992), or in everyday life (Bakardjieva, 2005). This work enhances these lines of studies by exploring everyday struggles with technology...... from a life stage (Erikson, 1959) point of view. In particular, we explore what are common struggles people have with technology and what are distinct struggles in relation to life stages. In conclusion, we will present our findings by outlining what we call ‘technological biographies’. Those...

  11. Emerging and Disruptive Technologies.

    Science.gov (United States)

    Kricka, Larry J

    2016-08-01

    Several emerging or disruptive technologies can be identified that might, at some point in the future, displace established laboratory medicine technologies and practices. These include increased automation in the form of robots, 3-D printing, technology convergence (e.g., plug-in glucose meters for smart phones), new point-of-care technologies (e.g., contact lenses with sensors, digital and wireless enabled pregnancy tests) and testing locations (e.g., Retail Health Clinics, new at-home testing formats), new types of specimens (e.g., cell free DNA), big biology/data (e.g., million genome projects), and new regulations (e.g., for laboratory developed tests). In addition, there are many emerging technologies (e.g., planar arrays, mass spectrometry) that might find even broader application in the future and therefore also disrupt current practice. One interesting source of disruptive technology may prove to be the Qualcomm Tricorder XPrize, currently in its final stages.

  12. NAND flash memory technologies

    CERN Document Server

    Aritome, Seiichi

    2016-01-01

    This book discusses basic and advanced NAND flash memory technologies, including the principle of NAND flash, memory cell technologies, multi-bits cell technologies, scaling challenges of memory cell, reliability, and 3-dimensional cell as the future technology. Chapter 1 describes the background and early history of NAND flash. The basic device structures and operations are described in Chapter 2. Next, the author discusses the memory cell technologies focused on scaling in Chapter 3, and introduces the advanced operations for multi-level cells in Chapter 4. The physical limitations for scaling are examined in Chapter 5, and Chapter 6 describes the reliability of NAND flash memory. Chapter 7 examines 3-dimensional (3D) NAND flash memory cells and discusses the pros and cons in structure, process, operations, scalability, and performance. In Chapter 8, challenges of 3D NAND flash memory are dis ussed. Finally, in Chapter 9, the author summarizes and describes the prospect of technologies and market for the fu...

  13. Technological Capability's Predictor Variables

    Directory of Open Access Journals (Sweden)

    Fernanda Maciel Reichert

    2011-03-01

    Full Text Available The aim of this study was to identify the factors that influence in configuration of the technological capability of companies in sectors with medium-low technological intensity. To achieve the goal proposed in this article a survey was carried out. Based on the framework developed by Lall (1992 which classifies firms in basic, intermediate and advanced level of technological capability; it was found that the predominant technological capability is intermediate, with 83.7% of respondent companies (plastics companies in Brazil. It is believed that the main contribution of this study is the finding that the dependent variable named “Technological Capability” can be explained at a rate of 65% by six variables: development of new processes; selection of the best equipment supplier; sales of internally developed new technology to third parties; design and manufacture of equipment; study of the work methods and perform inventory control; and improvement of product quality.

  14. Technology Transfer and Commercialization

    Science.gov (United States)

    Martin, Katherine; Chapman, Diane; Giffith, Melanie; Molnar, Darwin

    2001-01-01

    During concurrent sessions for Materials and Structures for High Performance and Emissions Reduction, the UEET Intellectual Property Officer and the Technology Commercialization Specialist will discuss the UEET Technology Transfer and Commercialization goals and efforts. This will include a review of the Technology Commercialization Plan for UEET and what UEET personnel are asked to do to further the goals of the Plan. The major goal of the Plan is to define methods for how UEET assets can best be infused into industry. The National Technology Transfer Center will conduct a summary of its efforts in assessing UEET technologies in the areas of materials and emissions reduction for commercial potential. NTTC is assisting us in completing an inventory and prioritization by commercialization potential. This will result in increased exposure of UEET capabilities to the private sector. The session will include audience solicitation of additional commercializable technologies.

  15. Technology transfer packages

    International Nuclear Information System (INIS)

    Mizon, G.A.; Bleasdale, P.A.

    1994-01-01

    Nuclear power is firmly established in many developed countries'energy policies and is being adopted by emerging nations as an attractive way of gaining energy self sufficiency. The early users of nuclear power had to develop the technology that they needed, which now, through increasing world wide experience, has been rationalised to meet demanding economic and environmental pressures. These justifiable pressures, can lead to existing suppliers of nuclear services to consider changing to more appropriate technologies and for new suppliers to consider licensing proven technology rather then incurring the cost of developing new alternatives. The transfer of technology, under license, is made more straight forward if the owner conveniently groups appropriate technology into packages. This paper gives examples of 'Technology Packages' and suggests criteria for the specification, selection and contractual requirements to ensure successful licensing

  16. Promoting renewable energy technologies

    DEFF Research Database (Denmark)

    Olsen, O.J.; Skytte, K.

    2004-01-01

    % of its annual electricity production. In this paper, we present and discuss the Danish experience as a case of promoting renewable energy technologies. The development path of the two technologies has been very different. Wind power is considered an outright success with fast deployment to decreasing...... technology and its particular context, it is possible to formulate some general principles that can help to create an effective and efficient policy for promoting new renewable energy technologies.......Wind power and combined heat and power (CHP) using biomass (for combustion, gasification or fermentation) are two of the most promising renewable technologies for generation of electricity. Denmark has a long and well-established tradition for these technologies that now account for approx. 25...

  17. Information Technology Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

  18. Trends in Technology Use

    OpenAIRE

    Florin Frant

    2009-01-01

    This study aims to investigate the relationship between the use of technology, working conditions and the health and well-being of workers in Europe. As it is known that characteristics of work organisation may reinforce or impair both positive and negative effects of technology use, the role of these characteristics is also considered in this study. The research will provide an insight into the trends and changes in technology use and working conditions in European count...

  19. Digital Sensor Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ted Quinn; Jerry Mauck; Richard Bockhorst; Ken Thomas

    2013-07-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy, reliability, availability, and maintainability. This report demonstrates these benefits in direct comparisons of digital and analog sensor applications. It also addresses the qualification issues that must be addressed in the application of digital sensor technology.

  20. Semiotic technology and practice

    DEFF Research Database (Denmark)

    Zhao, Sumin; Djonov, Emilia; van Leeuwen, Theo

    2014-01-01

    for discourse analysis and social semiotic research, focusing especially on the need to step away from the notion of text and to develop a holistic, non-logocentric, and adaptive multimodal approach to researching semiotic technologies. Using PowerPoint as a case study, this article takes a step toward...... developing a social semiotic multimodal theory of the relation between semiotic technologies, or technologies for making meaning, and semiotic practices....

  1. RFID TECHNOLOGY: AN OVERVIEW

    OpenAIRE

    Amit Kumar Pal; Akanksha Tripathi; Anupam Saigal

    2017-01-01

    The information technology has changed the way library professional to interact, communicate, share and acquire knowledge. However, when the computer was created it did not have features and facilities for users to interact. With the evaluation of Internet and Communication Technology, manual library has evolved into a dynamic, interactive and collaborative platform that facilitates exchange of knowledge and information among its users. RFID is the latest technology to be used in libraries an...

  2. Health care technology assessment

    Science.gov (United States)

    Goodman, Clifford

    1994-12-01

    The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

  3. Technology Roadmaps: Cement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    To support its roadmap work focusing on key technologies for emissions reductions, the International Energy Agency (IEA) also investigated one particular industry: cement. Cement production includes technologies that are both specific to this industry and those that are shared with other industries (e.g., grinding, fuel preparation, combustion, crushing, transport). An industry specific roadmap provides an effective mechanism to bring together several technology options. It outlines the potential for technological advancement for emissions reductions in one industry, as well as potential cross-industry collaboration.

  4. Explosive Technology Group

    Data.gov (United States)

    Federal Laboratory Consortium — The Explosive Technology Group (ETG) provides diverse technical expertise and an agile, integrated approach to solve complex challenges for all classes of energetic...

  5. Mixed plastics recycling technology

    CERN Document Server

    Hegberg, Bruce

    1995-01-01

    Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.

  6. Technology Education in Japan.

    Science.gov (United States)

    Murata, Shoji; Stern, Sam

    1993-01-01

    Describes the history, current status, and future direction of technology education in Japan, including the process of curriculum transition, secondary and postsecondary structure, and lack of resources. (SK)

  7. Distributed Energy Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Distributed Energy Technologies Laboratory (DETL) is an extension of the power electronics testing capabilities of the Photovoltaic System Evaluation Laboratory...

  8. Extending Database Integration Technology

    National Research Council Canada - National Science Library

    Buneman, Peter

    1999-01-01

    Formal approaches to the semantics of databases and database languages can have immediate and practical consequences in extending database integration technologies to include a vastly greater range...

  9. Advanced Surface Technology

    DEFF Research Database (Denmark)

    Møller, Per; Nielsen, Lars Pleht

    , nitriding, carbonitriding, and many other lesser-known thermochemical processes used for solving technological problems. The book is richly illustrated with pictures and figures showing how the technology creates new innovative solutions for industry and how surfaces are becoming integral to the function......This new significant book on advanced modern surface technology in all its variations, is aimed at both teaching at engineering schools and practical application in industry. The work covers all the significant aspects of modern surface technology and also describes how new advanced techniques make...

  10. Networked Constellation Communications Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop communications architectures and enabling technologies for mission concepts relying on multiple spatially distributed spacecraft to perform coordinated...

  11. Irradiation technology - industrial use

    International Nuclear Information System (INIS)

    Zyball, A.

    1995-01-01

    The most important applications of the radiation technology are the crosslinking of polymers and sterilisation. Although extensive experience about the use of this technology is available and powerful and dependable radiation facilities can be obtained, as yet the radiation technology has not found the acceptance it deserves in the industry. The main reason therefore has to do with how the question of radiation or the term radiation is presented to the industry and among the population. This paper will deal with considerations and ways in which the industrial use of the radiation technology can be expanded. (author)

  12. Acoustic Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory contains an electro-magnetic worldwide data collection and field measurement capability in the area of acoustic technology. Outfitted by NASA Langley...

  13. Solar Cooker Technological Change

    DEFF Research Database (Denmark)

    Ahmad, Bashir

    1997-01-01

    The challenges which solar cooking technology is facing right now is discussed. Based on a field study in Madras and Gujarat, it is asserted that there is an important incompatibility between the technology and the every day real-life conditions of the "users" of solar cooker. An evaluation report...... on a solar cooker technology in Burkina Faso supports the findings of the study. It is concluded that the users and other important actors have to be incorporated in the technological development process of solar cookers in the future....

  14. Future Information Technology

    CERN Document Server

    Stojmenovic, Ivan; Choi, Min; Xhafa, Fatos; FutureTech 2013

    2014-01-01

    Future technology information technology stands for all of continuously evolving and converging information technologies, including digital convergence, multimedia convergence, intelligent applications, embedded systems, mobile and wireless communications, bio-inspired computing, grid and cloud computing, semantic web, user experience and HCI, security and trust computing and so on, for satisfying our ever-changing needs. In past twenty five years or so, Information Technology (IT) influenced and changed every aspect of our lives and our cultures. These proceedings foster the dissemination of state-of-the-art research in all future IT areas, including their models, services, and novel applications associated with their utilization.

  15. Advanced Optical Fuzing Technology

    National Research Council Canada - National Science Library

    Lippe, Christian M. von der; Liu, J. J; Aliberti, Keith; Dang, Gerard; Chang, Wayne; Shen, Paul; Simonis, George

    2004-01-01

    .... The photonic component development exploits pioneering work and unique expertise at ARDEC, ARL, and Sandia National Laboratories by combining key optoelectronic technologies to design and demonstrate...

  16. Moralizing Food Technology

    DEFF Research Database (Denmark)

    Coff, Christian Eyde

    2015-01-01

    Food technologies are common on many levels in society and used by both food professionals and consumers. Food technologies are not neutral. They inform and shape the behaviour of people. This paper presents a theoretical framework for analysing the mediating role of food technology and its...... influence on food ethics. Post-phenomenology and the idea of a technologically mediated morality are central theoretical approaches. Four elements are included in the analytical framework: perception, interpretation, intentionality, and mediated morality. The framework is applied to two cases; food safety...

  17. Application Technology Research Unit

    Data.gov (United States)

    Federal Laboratory Consortium — To conduct fundamental and developmental research on new and improved application technologies to protect floricultural, nursery, landscape, turf, horticultural, and...

  18. Advanced Surface Technology

    DEFF Research Database (Denmark)

    Møller, Per; Nielsen, Lars Pleht

    This new significant book on advanced modern surface technology in all its variations, is aimed at both teaching at engineering schools and practical application in industry. The work covers all the significant aspects of modern surface technology and also describes how new advanced techniques make......, nitriding, carbonitriding, and many other lesser-known thermochemical processes used for solving technological problems. The book is richly illustrated with pictures and figures showing how the technology creates new innovative solutions for industry and how surfaces are becoming integral to the function...

  19. Traditions of technology

    Energy Technology Data Exchange (ETDEWEB)

    Nandy, A.

    1979-01-01

    Modern technology, with about 300 years of history behind it, has become the dominant tradition by marginalizing the other traditions of technology in the West and in the rest of the world. Important roles have been played in this marginalization by the ideology of Englightenment, by the Industrial Revolution, and nineteenth and twentieth century colonialism. They have blurred the difference between science and technology, underwritten the mechanomorphic world-image and promoted the concept of a value-free, ethically unrestrained technology. However, the present crises of technological consciousness has brought to the fore alternative traditions of technology, not as ethnotechnologies from which a universal, secular, modern technology can draw lessons, but as a competing philosophies of universality which can provide correctives to the alienating, exploitative, and dehumanizing role of modern science and technology. An alternative ideology of science is needed for this as well as a new legitimacy for the traditional technosystems and their cultural environments. Such a legitimacy will have to be based on a different set of values relating to the man--nature and man--man relationships and a deeper understanding of the politics of technology in its cross-national and cross-cultural contexts.

  20. Robotics Technology Crosscutting Program. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    The Robotics Technology Development Program (RTDP) is a needs-driven effort. A length series of presentations and discussions at DOE sites considered critical to DOE's Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the resulting robotics needs assessment revealed several common threads running through the sites: Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination and Dismantlement (D and D). The RTDP Group also realized that some of the technology development in these four areas had common (Cross Cutting-CC) needs, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) process urged an additional organizational breakdown between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). These factors lead to the formation of the fifth application area for Crosscutting and Advanced Technology (CC and AT) development. The RTDP is thus organized around these application areas -- TWR, CAA, MWO, D and D, and CC and AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas

  1. Testing Technology: A Sandia technology bulletin

    Energy Technology Data Exchange (ETDEWEB)

    Goetsch, B.; Floyd, H.L.; Doran, L. [eds.

    1994-08-01

    Inside this issue is a farewell to Testing Technology message from technical advisor, Ruth David. Also included are articles on: Testing the I-40 bridge over the Rio Grande, simulated reactor meltdown studies, an inexpensive monitor for testing integrated circuits, testing of antihelicoptor mines, and quality assurance on aircraft inspection.

  2. The Next Technology Revolution - Nano Electronic Technology

    Science.gov (United States)

    Turlik, Iwona

    2004-03-01

    Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

  3. Technology Transfer and Technology Transfer Intermediaries

    Science.gov (United States)

    Bauer, Stephen M.; Flagg, Jennifer L.

    2010-01-01

    A standard and comprehensive model is needed to evaluate and compare technology transfer systems and the stakeholders within these systems. The principle systems considered include federal laboratories, U.S. universities, the rehabilitation engineering research centers (RERCs), and large small business innovation research programs. An earlier…

  4. Technology Applications Team: Applications of aerospace technology

    Science.gov (United States)

    1993-01-01

    Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

  5. Digital Actuator Technology

    Energy Technology Data Exchange (ETDEWEB)

    Ken Thomas; Ted Quinn; Jerry Mauck; Richard Bockhorst

    2014-09-01

    There are significant developments underway in new types of actuators for power plant active components. Many of these make use of digital technology to provide a wide array of benefits in performance of the actuators and in reduced burden to maintain them. These new product offerings have gained considerable acceptance in use in process plants. In addition, they have been used in conventional power generation very successfully. This technology has been proven to deliver the benefits promised and substantiate the claims of improved performance. The nuclear industry has been reluctant to incorporate digital actuator technology into nuclear plant designs due to concerns due to a number of concerns. These could be summarized as cost, regulatory uncertainty, and a certain comfort factor with legacy analog technology. The replacement opportunity for these types of components represents a decision point for whether to invest in more modern technology that would provide superior operational and maintenance benefits. Yet, the application of digital technology has been problematic for the nuclear industry, due to qualification and regulatory issues. With some notable exceptions, the result has been a continuing reluctance to undertake the risks and uncertainties of implementing digital actuator technology when replacement opportunities present themselves. Rather, utilities would typically prefer to accept the performance limitations of the legacy analog actuator technologies to avoid impacts to project costs and schedules. The purpose of this report is to demonstrate that the benefits of digital actuator technology can be significant in terms of plant performance and that it is worthwhile to address the barriers currently holding back the widespread development and use of this technology. It addresses two important objectives in pursuit of the beneficial use of digital actuator technology for nuclear power plants: 1. To demonstrate the benefits of digital actuator

  6. Technology Catalogue. First edition

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Department of Energy`s Office of Environmental Restoration and Waste Management (EM) is responsible for remediating its contaminated sites and managing its waste inventory in a safe and efficient manner. EM`s Office of Technology Development (OTD) supports applied research and demonstration efforts to develop and transfer innovative, cost-effective technologies to its site clean-up and waste management programs within EM`s Office of Environmental Restoration and Office of Waste Management. The purpose of the Technology Catalogue is to provide performance data on OTD-developed technologies to scientists and engineers assessing and recommending technical solutions within the Department`s clean-up and waste management programs, as well as to industry, other federal and state agencies, and the academic community. OTD`s applied research and demonstration activities are conducted in programs referred to as Integrated Demonstrations (IDs) and Integrated Programs (IPs). The IDs test and evaluate.systems, consisting of coupled technologies, at specific sites to address generic problems, such as the sensing, treatment, and disposal of buried waste containers. The IPs support applied research activities in specific applications areas, such as in situ remediation, efficient separations processes, and site characterization. The Technology Catalogue is a means for communicating the status. of the development of these innovative technologies. The FY93 Technology Catalogue features technologies successfully demonstrated in the field through IDs and sufficiently mature to be used in the near-term. Technologies from the following IDs are featured in the FY93 Technology Catalogue: Buried Waste ID (Idaho National Engineering Laboratory, Idaho); Mixed Waste Landfill ID (Sandia National Laboratories, New Mexico); Underground Storage Tank ID (Hanford, Washington); Volatile organic compound (VOC) Arid ID (Richland, Washington); and VOC Non-Arid ID (Savannah River Site, South Carolina).

  7. Study of the artificial radioactivity of the marine medium using gamma spectrometry (1962-1966); Etude de la radioactivite artificielle du milieu marin par spectrometrie gamma (1962-1966)

    Energy Technology Data Exchange (ETDEWEB)

    Chesselet, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The results described in this study are relative to the artificial radioactivity of such elements as zirconium-95, niobium-95, ruthenium-103, ruthenium-106, cerium-141, cerium-144 and praseodymium-144 which were present in the atmospheric fallout between 1962 and 1964, and their incidence in superficial marine waters. Various physical, chemical or biological processes are studied by a high sensitivity gamma ray spectrometry technic, using those radioelements as 'tracers'. The change of state in sea water of an important fraction (about 50 per cent) of the radioactive particles going into the soluble phase - this phenomenon was not expected for those radioelements - controls the processes of accumulation in the planktonic biomass and the diffusion towards deeper waters. On the other hand, an 'in situ' spectrometry method is described. It enables the direct measurement in the sea of very low concentrations of some gamma ray emitters. The application of this method has made possible to carry out numerous observations in the surface waters of the Western Mediterranean sea and in the Bay of Biscay. It is shown that the mixing depth is closely connected to the depth of the thermocline. An accumulation process at this level is observed. The diffusion coefficients are similar to the thermal turbulent coefficient. The existence during several months of 'compartments' is established for the surface waters of the Bay of Biscay. From the establishment of the budget of fall-out, a comparative study shows that the rate of radioactive fallout on the maritime zone considered is always two to three times higher than on the neighbouring continental regions. Several explanations of this phenomenon are discussed. (author) [French] Les resultats decrits dans cette etude concernent la radioactivite artificielle sous forme de zirconium-95, niobium-95, ruthenium-103, ruthenium-106, cerium-141, cerium-144 et praseodyme-144 apportee par la retombee

  8. Assessing Teacher Technology Skills.

    Science.gov (United States)

    Anderson, Mary Alice

    2000-01-01

    Advocates the assessment of teachers' technology skills by school media and technology specialists who are involved in staff training. Discusses what should be assessed, including level of curricular integration and attitudes; assessment objectives; informal assessments; formal assessments; assessment tools; and administrators as role models for…

  9. Managing Technology Projects

    Science.gov (United States)

    Booth, Char

    2009-01-01

    This will be my first time authoring this column, and I'm delighted to have the opportunity it presents to explore the intersection of library technology and public services. As the recent title of the 2008 Internet Librarian conference indicates, "Beyond Library 2.0: User-Focused Tools and Technologies," the tide of what for several years has…

  10. Computers: Educational Technology Paradox?

    Science.gov (United States)

    Hashim, Hajah Rugayah Hj.; Mustapha, Wan Narita

    2005-01-01

    As we move further into the new millennium, the need to involve and adapt learners with new technology have been the main aim of many institutions of higher learning in Malaysia. The involvement of the government in huge technology-based projects like the Multimedia Super Corridor Highway (MSC) and one of its flagships, the Smart Schools have…

  11. New technologies in contraception

    OpenAIRE

    Rowlands, Sam

    2009-01-01

    New technologies in both reversible contraception and sterilisation are described. The review includes recent advances in the development of oral contraception, emergency contraception, injectable contraception, vaginal rings, subdermal implants, transdermal contraception, intrauterine devices, spermicides and barrier methods. It also covers methods of transcervical female sterilisation and more easily reversible male sterilisation. The emphasis is on the technology and its safety and effecti...

  12. Resources in Technology 7.

    Science.gov (United States)

    International Technology Education Association, Reston, VA.

    This volume of Resources in Technology contains the following eight instructional modules: (1) "Processing Technology"; (2) "Water--A Magic Resource"; (3) "Hazardous Waste Disposal--The NIMBY (Not in My Backyard) Syndrome"; (4) "Processing Fibers and Fabrics"; (5) "Robotics--An Emerging…

  13. School Security Technologies

    Science.gov (United States)

    Schneider, Tod

    2010-01-01

    Over the past decade electronic security technology has evolved from an exotic possibility into an essential safety consideration. Before resorting to high-tech security solutions, school officials should think carefully about the potential for unintended consequences. Technological fixes may be mismatched to the problems being addressed. They can…

  14. Botswana Journal of Technology

    African Journals Online (AJOL)

    Botswana Journal of Technology describes original developments or research in the field of Engineering and Technology. It is published twice a year. Vol 22, No 1 (2013). DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access. Table of Contents. Articles. Urbanisation, infrastructure ...

  15. Educational Technology: Integration?

    Science.gov (United States)

    Christensen, Dean L.; Tennyson, Robert D.

    This paper presents a perspective of the current state of technology-assisted instruction integrating computer language, artificial intelligence (AI), and a review of cognitive science applied to instruction. The following topics are briefly discussed: (1) the language of instructional technology, i.e., programming languages, including authoring…

  16. Technology and Teaching Philosophy

    Science.gov (United States)

    King, Paul C.

    2012-01-01

    This article discusses the challenges faced when integrating new technologies into the classroom. Viewing the experiences of teaching a first year learning community through the lens of the principles of the Reflective Teaching Portfolio, the author looks to answer the question: "How should Technology relate to our Teaching Philosophy?"…

  17. CSIR Technology Impact 1998

    CSIR Research Space (South Africa)

    CSIR

    1998-01-01

    Full Text Available stream_source_info CSIR Technology Impact 1998.pdf.txt stream_content_type text/plain stream_size 23 Content-Encoding ISO-8859-1 stream_name CSIR Technology Impact 1998.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  18. Technology and Educational Structure

    Science.gov (United States)

    Boocock, Sarane S.

    2012-01-01

    Most current debate on instructional technology is characterized either by grandiose speculation on the salvation of education through automation (without specification of "what" and "how" technological innovations will actually be introduced in specific classroom situations, and how the changes will be financed), or by jargon-filled hairsplitting…

  19. US blanket technology programs

    International Nuclear Information System (INIS)

    Nygren, R.E.

    1985-01-01

    Experimental research in US programs related to blanket technology is described through brief summaries of the objectives, facilities, recent experimental results and principal investigators for the Blanket Technology Program, TRIO-1 Experiment, TSTA, Fusion Hybrid Program and selected activities in the Fusion Materials and Fusion Safety Programs in neutronics research

  20. Advanced Mirror Technology Development

    Science.gov (United States)

    Stahl, H. Philip

    2017-01-01

    The Advanced Mirror Technology Development (AMTD) project matures critical technologies required to enable ultra-stable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics and ultra-high-contrast observations of exoplanets.

  1. Learning Languages through Technology

    Science.gov (United States)

    Hanson-Smith, Elizabeth, Ed.; Rilling, Sarah, Ed.

    2007-01-01

    While posing important questions about how learning proceeds with new technologies, this volume demonstrates how teachers captivate the imagination of learners, from schoolchildren to postgraduates, by providing real-world purposes for language. The authors are from educational institutions in many regions of the world, and describe technology use…

  2. JOURNAL OF LANGUAGE, TECHNOLOGY ...

    African Journals Online (AJOL)

    Frederick Iraki

    It is also claimed that with modern technology, the tendency toward enjoying computer systems in education has also increased and it has affected the way of learning. EFL points in EFL classes. It is believed that the computer and also information technology was introduced in language laboratories to improve the learners' ...

  3. More Technology, Less Learning?

    Science.gov (United States)

    Kulesza, Justin; DeHondt, Gerald, II.; Nezlek, George

    2011-01-01

    Modern information technologies (presentation software, wireless laptop computers, cell phones, etc.) are purported to enhance student learning. Research to date provides an ambivalent and often conflicting set of outcomes about the effectiveness of such technologies in the context of the college classroom. Anecdotal evidence further complicates…

  4. IT Department Technology Transfer

    CERN Multimedia

    Birker, D

    2004-01-01

    The objective of Technology Transfer (TT) at CERN is “to make known and available to third parties under agreed conditions, technical developments achieved in fulfi lling the laboratory’s mission in fundamental research”. The IT Department contributes to this objective by the transfer of technology, expertise and know-how to industry, universities, public institutions and the society at large.

  5. Science and Technology Policy

    DEFF Research Database (Denmark)

    Baark, Erik

    1996-01-01

    This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years.......This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years....

  6. Riding the Technology Wave.

    Science.gov (United States)

    Malan, Pierre

    This paper presents an overview of information technology development. The first section sets the scene, comparing the first WAN (Wide Area Network) and Intel processor to current technology. The birth of the microcomputer is described in the second section, including historical background on semiconductors, microprocessors, and the microcomputer.…

  7. Graphite technology development plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-07-01

    This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

  8. Technologies for life

    International Nuclear Information System (INIS)

    Kerner, J.

    2006-01-01

    In this video-film technologies applied in the BIONT, a. s. are presented. Production of radionuclides and radiopharmaceuticals as well as principles of positron emission tomography and diagnostic using is explained. Other technologies implemented and planned in the Cyclotron Center of the Slovak Republic are presented.

  9. Church - Technology - Nuclear Power

    International Nuclear Information System (INIS)

    May, H.

    1982-01-01

    In order to cope with the problems causing a great deal of trouble today, i.e. with fear and with the ethical substantiation of technology, the author considers an integration model necessary which is to link science and technology and religion and philosophy. (RW) [de

  10. Assistive Technologies for Reading

    Science.gov (United States)

    Ruffin, Tiece M.

    2012-01-01

    Twenty-first century teachers working with diverse readers are often faced with the question of how to integrate technology in reading instruction that meets the needs of the techno-generation. Are today's teachers equipped with the knowledge of how to effectively use Assistive Technologies (AT) for reading? This position paper discusses AT for…

  11. VENTILATION TECHNOLOGY SYSTEMS ANALYSIS

    Science.gov (United States)

    The report gives results of a project to develop a systems analysis of ventilation technology and provide a state-of-the-art assessment of ventilation and indoor air quality (IAQ) research needs. (NOTE: Ventilation technology is defined as the hardware necessary to bring outdoor ...

  12. A Technology Enabled Journey

    Science.gov (United States)

    Devine, Pamela Albert

    2012-01-01

    This article features Point Road School, a pre-K-4 school in New Jersey that enhances student learning by integrating new and emerging technologies into the curriculum. Point Road School's technology story began in 1996 with a grant for a classroom modem so students could email their university literacy buddies. The New Jersey school has moved…

  13. TECHNOLOGICAL INNOVATIONS AND SOCIETY.

    Science.gov (United States)

    MORSE, DEAN; WARNER, AARON W.

    THE PAPERS AND DISCUSSIONS IN THIS BOOK REPRESENT THE DELIBERATIONS OF THE 1964-65 COLUMBIA SEMINAR OF TECHNOLOGY AND SOCIAL CHANGE IN WHICH, DURING REGULAR MONTHLY MEETINGS THROUGHOUT THE ACADEMIC YEAR, A DIVERSE GROUP OF PHYSICAL SCIENTISTS, SOCIAL SCIENTISTS, BUSINESS LEADERS, AND PUBLIC OFFICIALS ATTEMPED TO RELATE TECHNOLOGY TO INNOVATION AND…

  14. Danish SDHW Technology

    DEFF Research Database (Denmark)

    Furbo, Simon

    1996-01-01

    The status of Danish technology for solar heating systems for hot water supply as well as R&D work in the field is presented.......The status of Danish technology for solar heating systems for hot water supply as well as R&D work in the field is presented....

  15. Mechatronics and hybrid technologies

    DEFF Research Database (Denmark)

    2008-01-01

    R&D international contributions to control and design of novel intelligent mechatronic products and solutions with sensor- and actuator technology.......R&D international contributions to control and design of novel intelligent mechatronic products and solutions with sensor- and actuator technology....

  16. Emerging wind energy technologies

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Grivel, Jean-Claude; Faber, Michael Havbro

    2014-01-01

    This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive.......This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive....

  17. Rehabilitation Technology Review.

    Science.gov (United States)

    Hatherleigh Co., Ltd., New York, NY.

    Designed as a special continuing education program for rehabilitation professionals, this document is divided into five lessons. Lesson 1, "Technology Assessment: Determining the Needs" (Ricardo G. Cerna), includes discussion on technology assessment and determining the needs of the clients as well as different types of assistive…

  18. Nuclear safeguards technology handbook

    International Nuclear Information System (INIS)

    1977-12-01

    The purpose of this handbook is to present to United States industrial organizations the Department of Energy's (DOE) Safeguards Technology Program. The roles and missions for safeguards in the U.S. government and application of the DOE technology program to industry safeguards planning are discussed. A guide to sources and products is included

  19. Environmental science and technology

    Energy Technology Data Exchange (ETDEWEB)

    Manahan, S.E. [Univ. of Missouri, Columbia, MO (United States)

    1998-12-31

    This complete survey of modern environmental science covers the four traditional spheres of the environment: water, air, earth, and life, and introduces a fifth sphere -- the anthrosphere -- which the author defines as the sphere of human activities, especially technology, that affect the earth. The book discusses how technology can be used in a manner that minimizes environmental disruption.

  20. What Is Educational Technology?

    Science.gov (United States)

    Ingle, Henry T.

    1975-01-01

    Featured in this issue are the English translations of two speeches delivered to graduate students in educational technology at Pontificia Universidade, Porto Alegre, Brazil. Henry Ingle defines educational technology in the traditional as well as modern sense, describes its essential elements, and discusses situations in which the use of…

  1. Information technology ethics

    DEFF Research Database (Denmark)

    Hongladarom, Soraj; Ess, Charles

    This book was the first publication to take a genuinely global approach to the diverse ethical issues evoked by Information and Communication Technologies and their possible resolutions. Readers will gain a greater appreciation for the problems and possibilities of genuinely global information...... ethics, which are urgently needed as information and communication technologies continue their exponential growth...

  2. Discourses of Technology

    DEFF Research Database (Denmark)

    Sommer, Jannek K.; Knudsen, Gry Høngsmark

    technology products to explore the negotiation of the familiar and alien that makes consumers reject or embrace a new technology. Thus, this particular project sets out to analyze consumer discourses surrounding the Google Glass video “How it Feels [through Google Glass]” on YouTube, because we want...

  3. Assistive Technology (Moldinclud)

    OpenAIRE

    Luján Mora, Sergio

    2011-01-01

    Slides of the seminar "Assistive Technology" taught at the Institul de Stat de Instruire Continua (Chisinau, Moldova) in november 2011. Transparencias del seminario "Assistive Technology" impartido en el Institul de Stat de Instruire Continua (Chisinau, Moldavia) en noviembre 2011. Tempus project: MOLDINCLUD, Teaching Training Centre for Inclusive Education (TEMPUS 158980-2009).

  4. Educational Technology in Japan.

    Science.gov (United States)

    Sakamoto, Takashi

    1987-01-01

    This overview of the current state of educational technology in Japan includes discussions of professional associations; academic and popular journals; diffusion of media and the budget in elementary and secondary schools; recent trends in government policies; educational technology research; a literature review; and suggestions of future trends.…

  5. Arts and Technology

    DEFF Research Database (Denmark)

    This book constitutes the thoroughly refereed post-conference proceedings of the Second International Conference on Arts and Technology, ArtsIT 2011, which was held in December 2011 in Esbjerg, Denmark. The 19 revised full papers and the two poster papers cover various topics such as Interaction...... and Art, Music and Performance, and Digital Technology....

  6. Study of secondary electronic emission in some piezo-electric materials: application to ultrasonic visualization; Etude de l'emission electronique secondaire de quelques materiaux piezoelectriques: application a la visualisation ultrasonore

    Energy Technology Data Exchange (ETDEWEB)

    Marini, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Methods allowing the visualization of acoustic images appear at the moment to be of great interest in the field of non-destructive testing as well as in that of underwater detection. In order to carry out certain calculations on the operation of an ultrasonic camera, it has been necessary to study the secondary electron emission of some piezoelectric materials liable to be incorporated into the equipment. The secondary electron emission of insulators is a rather complex phenomenon; in order to find a rational explanation for the observations made, a theory has been developed for the energy spectrum of the emitted electrons. The experimental results of this work have then been used to build an ultrasonic visualization installation. Some examples of acoustic images which have been visualized are also presented. (author) [French] Les methodes qui permettent de visualiser des images acoustiques trouvent a l'heure actuelle un grand interet dans le domaine du controle non destructif comme dans celui de la detection sous-marine. De maniere a effectuer certains calculs sur le fonctionnement d'une camera ultrasons, il a ete necessaire d'etudier l'emission electronique secondaire de quelques materiaux piezoelectriques susceptibles d'etre utilises dans sa construction. L'emission electronique secondaire des isolants est un phenomene assez complexe et de maniere a trouver des explications coherentes aux observations effectuees, une theorie du spectre energetique des electrons emis a ete elaboree. Une installation de visualisation ultrasonore a alors ete realisee a partir des donnees experimentales de cette etude. Quelques exemples d'images acoustiques visualisees par cette methode sont egalement presentees. (auteur)

  7. Contribution to the study of the biological properties of compounds labeled with radio-chromium {sup 51}Cr; Contribution a l'etude des proprietes biologiques des composes marques au radiochrome {sup 51}Cr

    Energy Technology Data Exchange (ETDEWEB)

    Ingrand, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-15

    Among the radioisotopes commonly used in biology and medicine which are controlled Individually in the Radioelement Departement of the Saclay Nuclear Research Centre before being sent to the users, the author has chosen chromium 51 incorporated in inorganic salts or in organic substrates for a study of the biological properties of the compounds. In the first part, he has compared the pathways followed by the radioactive sodium chromate and chromic chloride mixed with blood or given to the whole animal, the object being to determine whether a reduction of hexavalent chromium occurs, both in vitro and in vivo. In the second part, the author has tried to show the validity of using, various substrates labeled with chromium 51, red cells, haemoglobin, plasma proteins and cytochrome c. The results obtained have contributed to underline the interest of using such compounds for biological applications. (author) [French] Parmi les radioisotopes d'utilisation courants en biologie et en medecine qui sont l'objet d'un controle particulier dans le Departement des Radioelements du Centre d'Etudes Nucleaires de Saclay avant leur diffusion aux utilisateurs, l'auteur a choisi le chrome 51 incorpore a des sels mineraux ou a des substrats organiques, afin d'en etudier les proprietes biologiques. Dans la premiere partie, il a compare le sort du chromate de sodium et du chlorure chromique radioactifs melanges a du sang ou administres a l'animal entier en s'efforcant de mettre en evidence une reduction du chrome hexavalent aussi bien in vitro qu'in vivo. Dans la deuxieme partie, il a cherche a etablir la validite de l'emploi de differents substrats marques au chrome 51, l'hematie, l'hemoglobine, les proteines plasmatiques et le cytochrome c. Les resultats obtenus ont permis de souligner le reel interet des applications biologiques des composes marques par le radioisotope. (auteur)

  8. Contribution to the study of detonation initiation by shock in solid explosives (1961); Contribution a l'etude de l'initiation de la detonation par choc dans les explosifs solides (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Fauquignon, C. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-05-15

    When a shock wave is induced in an explosive, it can initiate chemical reactions which lead more or less rapidly to a stable detonation state. In this study more particular attention was paid to the transition phase, in which has been evaluated the increases in the wave velocity, the pressure, and the electrical conductivity. The influence of the nature of the medium in front of the wave and in contact with the explosive has also been the subject of an experimental study designed to determine the extent to which its nature can be ignored and, subsequently, to characterise the initiation conditions using only the shock intensity induced in the explosive. Finally, the results were generalized for various explosive compositions and led to the development of a possible mechanism for shock initiation. (author) [French] Lorsqu'une onde de choc est induite dans un explosif, elle peut y amorcer des reactions chimiques qui conduisent plus ou moins rapidement a un regime de detonation stable. Dans cette etude, on s'est interesse plus particulierement a la phase transitoire dans laquelle on a evalue l'accroissement de la vitesse d'onde, de la pression et de la conductibilite electrique. L'influence du milieu amont, au contact de l'explosif, a egalement fait l'objet de recherches experimentales de facon a determiner dans quelle mesure on pouvait s'affranchir de sa nature et, par suite, caracteriser les conditions d'initiation par la seule intensite du choc induit dans l'explosif. Enfin, les resultats ont ete generalises a diverses compositions explosives et ont conduit a l'elaboration d'un schema possible du mecanisme de l'initiation par choc. (auteur)

  9. Magnetic study of a few antiferromagnets in very-strong pulsed fields (450 kOE); Etude magnetique de quelques antiferromagnetiques dans des champs pulses tres intenses (450 k OE)

    Energy Technology Data Exchange (ETDEWEB)

    Krebs, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-01-01

    In this thesis we describe a pulsed field device with which we obtain magnetization curves up to 450 kOE at all temperatures between 1. 6 and 300. We have studied the 'spin-flopping'(and therefore the anisotropy) in MnF{sub 2} versus temperature, below the Neel point. We have also studied the antiferromagnets MnSO{sub 4}. and MnSO{sub 4}.H{sub 2}O which have revealed saturation fields respectively of 250 kOE and 320 kOE. (author) [French] Ce memoire est consacre a la fabrication et a la mise au point d'un appareillage utilisant la decharge d'une batterie de condensateurs, afin de faire des mesures d'aimantation en champs pulses jusqu'a 450 kOE a toute temperature entre 1,6 K et 300 K. Nous avons etudie le deplacement de la transition de 'spin-flopping' dans MnF{sub 2} en fonction de la temperature et nous en avons deduit la variation de la constante d'anisotropie en fonction de T au-dessous du point de Neel. Nous avons egalement fait l'etude magnetique des antiferromagnetiques MnSO{sub 4} et MnSO{sub 4}.H{sub 2}O et nous avons mis en evidence la saturation de ces deux substances pour des champs respectifs de 250 kOE et 320 kOE. (auteur)

  10. Diet in 45- to 74-year-old individuals with diagnosed diabetes: comparison to counterparts without diabetes in a nationally representative survey (Etude Nationale Nutrition Santé 2006-2007).

    Science.gov (United States)

    Castetbon, Katia; Bonaldi, Christophe; Deschamps, Valérie; Vernay, Michel; Malon, Aurélie; Salanave, Benoit; Druet, Céline

    2014-06-01

    A healthy diet has been shown to prevent diabetes complications. However, the eating habits of individuals with diabetes who are aware of their glycemic condition have been poorly studied. This study's objective was to assess the dietary behavior overall and according to dietary recommendations in adults diagnosed with diabetes compared with those of a general population of the same age (45 to 74 years) in a nationally representative survey carried out in France in 2006-2007 (Etude Nationale Nutrition Santé) (n=1,476 including 101 patients with diabetes). Trained dietitians assessed diet using three 24-hour recalls and diabetes was self-declared. After weighting and using multiple adjustments, mean food and nutrient intakes were compared according to diabetes status. Interactions with age and sex were sought. Adults with diabetes had lower intakes of sweetened foods (40 g/day vs 125 g/day), alcohol (1.45 g/day vs 1.64 g/day), energy (1,790 kcal/day vs 1,986 kcal/day), and simple sugar (63.1 g/day vs 89.8 g/day) and higher intakes of meat (126 g/day vs 109 g/day), complex carbohydrates (26.3% energy intake vs 23.6% energy intake), and vitamins B and E (628 μg/day vs 541 μg/day). In addition, 45- to 59-year-old individuals with diabetes ate more fruits and vegetables, fiber, beta carotene, folate, vitamin C, and potassium than adults of the same age who did not have diabetes. Overall, 45- to 74-year-old adults with diabetes had a higher-quality diet than individuals without diabetes. However, compared with recommendations, a healthy diet continues to represent a public health challenge in terms of preventing diabetes complications. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  11. Menopausal hormone therapy and new-onset diabetes in the French Etude Epidemiologique de Femmes de la Mutuelle Générale de l'Education Nationale (E3N) cohort.

    Science.gov (United States)

    de Lauzon-Guillain, B; Fournier, A; Fabre, A; Simon, N; Mesrine, S; Boutron-Ruault, M-C; Balkau, B; Clavel-Chapelon, F

    2009-10-01

    Two US randomised trials found a lower incidence of type 2 diabetes in women treated by menopausal hormone therapy (MHT) with oral conjugated equine oestrogen combined with medroxyprogesterone acetate. The purpose of this study was to evaluate the influence of various MHTs, according to their formulation and route of administration, on new-onset diabetes in a cohort of postmenopausal French women. The association between MHT use and new-onset diabetes was investigated by Cox regression analysis in 63,624 postmenopausal women in the prospective French cohort of the Etude Epidemiologique de Femmes de la Mutuelle Générale de l'Education Nationale (E3N). Cases of diabetes were identified through self-reporting or drug-reimbursement record linkage, and further validated. 1,220 new-onset diabetes cases were validated. We observed a lower risk of new-onset diabetes among women who had ever used MHT (HR 0.82 [95% CI 0.72-0.93]), compared with those who had never used MHT. Adjustment for BMI during follow-up (rather than according to baseline BMI) did not substantially modify this association. An oral route of oestrogen administration was associated with a greater decrease in diabetes risk than a cutaneous route (HR 0.68 [95% CI 0.55-0.85] vs 0.87 [95% CI 0.75-1.00], p for homogeneity = 0.028). We were not able to show significant differences between the progestagens used in combined MHT. Use of MHT appeared to be associated with a lower risk of new-onset diabetes. This relationship was not mediated by changes in BMI. Further studies are needed to confirm the stronger effect of oral administration of oestrogen compared with cutaneous administration.

  12. Birth weight, body silhouette over the life course, and incident diabetes in 91,453 middle-aged women from the French Etude Epidemiologique de Femmes de la Mutuelle Generale de l'Education Nationale (E3N) Cohort.

    Science.gov (United States)

    de Lauzon-Guillain, Blandine; Balkau, Beverley; Charles, Marie-Aline; Romieu, Isabelle; Boutron-Ruault, Marie-Christine; Clavel-Chapelon, Françoise

    2010-02-01

    Obesity and increases in body weight in adults are considered to be among the most important risk factors for type 2 diabetes. Low birth weight is also associated with a higher diabetes incidence. We aimed to examine to what extent the evolution of body shape, from childhood to adulthood, is related to incident diabetes in late adulthood. Etude Epidemiologique de Femmes de la Mutuelle Générale de l'Education Nationale (E3N) is a cohort study of French women born in 1925-1950 and followed by questionnaire every 2 years. At baseline, in 1990, women were asked to report their current weight, height, and body silhouette at various ages. Birth weight was recorded in 2002. Cases of diabetes were self-reported or obtained by drug reimbursement record linkage and further validated. Of the 91,453 women who were nondiabetic at baseline, 2,534 developed diabetes over the 15 years of follow-up. Birth weight and body silhouette at 8 years, at menarche, and in young adulthood (20-25 years) were inversely associated with the risk of diabetes, independently of adult BMI during follow-up (all P(trend) < 0.001). In mid-adulthood (35-40 years), the association was reversed, with an increase in risk related to a larger body silhouette. An increase in body silhouette from childhood to mid-adulthood amplified the risk of diabetes. Low birth weight and thinness until young adulthood may increase the risk of diabetes, independently of adult BMI during follow-up. Young women who were lean children should be especially warned against weight gain.

  13. Micronutrient dietary patterns associated with type 2 diabetes mellitus among women of the E3N-EPIC (Etude Epidémiologique auprès de femmes de l'Education Nationale) cohort study.

    Science.gov (United States)

    Mancini, Francesca Romana; Dow, Courtney; Affret, Aurélie; Rajaobelina, Kalina; Dartois, Laureen; Balkau, Beverley; Bonnet, Fabrice; Boutron-Ruault, Marie-Christine; Fagherazzi, Guy

    2018-02-19

    Micronutrients play a key role in type 2 diabetes mellitus (T2DM), but methodological difficulties arise from their collinearity and interdependencies with foods. The aim of the present study was to identify micronutrient dietary patterns in the E3N-EPIC (Etude Epidémiologique auprès de femmes de l'Education Nationale) cohort and to investigate their association with risk of T2DM. Principal component analysis was used to identify micronutrient patterns among 71 270 women from the E3N-EPIC cohort. Associations between micronutrient patterns and risk of T2DM were quantified by hazard ratios (HRs) and 95% confidence intervals (CIs) from Cox proportional hazards regression models, adjusted for potential confounders. Six micronutrient patterns were identified explaining 78% of the total variance in micronutrient intake. A positive association was found between T2DM and a pattern highly correlated with intake of vitamins B 2 and B 5 (HR 1.34; 95% CI 1.16-1.56). Similarly, a positive association was found with a pattern characterized by high intakes of vitamin B 12 and retinol, and a low intake of vitamin C (HR 1.30; 95% CI 1.15-1.48). An inverse association was observed between T2DM and another two patterns: one correlated with magnesium and vitamin B 3 (HR 0.75; 95% CI 0.66-0.86), and the other correlated with manganese intake (HR 0.82; 95% CI 0.72-0.94). The findings of the present study identify micronutrients that have an effect on the risk of T2DM, and enable better understanding of the complexity of the diet when investigating the association between micronutrients and T2DM. © 2018 Ruijin Hospital, Shanghai Jiaotong University School of Medicine and John Wiley & Sons Australia, Ltd.

  14. Study of the behaviour of artificial radioactive aerosols. Applications to some problems of atmospheric circulation (1963); Etude du comportement dcs aerosols radioactifs artificiels. Applications a quelques problemes de circulation atmospherique (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, G. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-11-15

    The aim of this work, consists in the examination of the behaviour of radioactive aerosols produced in the atmosphere by nuclear explosions, in order to deduce the most general laws governing atmospheric circulation and diffusion. After having given a general table of the radioactive aerosols present the authors consider the validity and the precision of the measurement methods and the concentration of the aerosols at ground level and in the upper atmosphere, as well as their deposition on the ground. The existence is thus demonstrated of a tropospheric equatorial barrier and of discontinuous and seasonal aspects of stratosphere-troposphere transfers. The role is shown of precipitations and dry auto-filtration in the lower atmosphere cleaning processes. This work makes it possible to describe the general behaviour of dust from the stratosphere, and to improve the total radioactive contamination of the globe. (author) [French] L'objectif de ce travail consiste a examiner le comportement des aerosols radioactifs introduits dans l'atmosphere par les explosions nucleaires, pour en deduire les lois les plus generals de la circulation et diffusion atmospheriques. Apres avoir dresse un tableau d'ensemble des aerosols radioactifs presents, on examine la validite et la precision des methodes de mesure de leur concentration, au niveau du sol et en haute atmosphere, ainsi que de leur depot a la surface du sol. On met ainsi en evidence l'existence d'une barriere equatoriale tropospherique; l'aspect discontinu et saisonnier des transferts stratosphere-troposphere; le role des precipitations et de l'auto-filtration seche, dans les processus de nettoyage de la basse atmosphere. Ces etudes permettent de decrire le comportement general des poussieres d'origine stratospherique et d'ameliorer le bilan de la contamination radioactive du globe. (auteur)

  15. Contribution to the studies on the mineral content of plant material through radioactivation analysis; Contribution a l'etude de la composition minerale des matieres vegetales au moyen de l'analyse par radioactivation

    Energy Technology Data Exchange (ETDEWEB)

    Fourcy, A. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1968-03-15

    Radioactivation analysis is by its great sensibility or its rapidity quite helpful in plant biology and agronomy. Specific composition of plants and results to obtain in biological experimentation have needed a practical research on analytical methods for plant materials, using for radioactivation swimming-pool reactor neutrons and 14 MeV neutrons from a generator. Dosage process for 25 elements is exposed, taking account of the interest of the analysis for each element, the average amount occurring in plants and the result obtained. Many applications are developed, concerning nutrition physiology, genetics, parasitology, toxicology, control of manufactured agricultural and pharmaceutical products industrial and pesticides residues, ecology, radioecology and biochemistry. (author) [French] L'analyse par radioactivation, par sa grande sensibilite ou sa rapidite, est susceptible de rendre de nombreux services en biologie vegetale et en agronomie. La composition particuliere des plantes et les buts recherches dans l'experimentation ont exige une etude concrete des methodes d'analyse propres a la matiere vegetale en utilisant, pour la radioactivation, soit un reacteur de type piscine a eau legere, soit un accelerateur generateur de neutrons de 14 MeV. Le mode de dosage de 25 elements est expose en tenant compte de l'interet de l'analyse de chaque element, des teneurs moyennes rencontrees dans les plantes, et du resultat atteint. De nombreuses applications sont developpees qui touchent a la physiologie de la nutrition, la genetique, la parasitologie, la toxicologie, le controle des fabrications, les pollutions industrielles, l'ecologie, la radioecologie et la biochimie. (auteur)

  16. Implementation of Emerging Technologies

    DEFF Research Database (Denmark)

    Barba, F. J.; Orlien, Vibeke; Mota, Maria J.

    2016-01-01

    resources. Lastly, studies with specific examples of the implementation of these novel processing technologies in food industry are described, focusing on the application of high-pressure processing and pulsed electric fields to orange juice, milk, and oysters. Higher implementation costs were observed...... electric fields, ohmic heating, microwave, and ultrasound) emerging technologies are briefly reviewed. Most of these technologies have found niche applications in the food industry, replacing or complementing conventional preservation technologies. Thereby, data on commercialization, energy, and microbial......Novel processing technologies have been gaining interest among food researchers due to their lower impact on nutritional and sensory properties of the products compared to the conventional thermal techniques. In this chapter some of the most well-studied (eg, high-pressure processing, pulsed...

  17. Technology research and development

    International Nuclear Information System (INIS)

    Haas, G.M.; Abdov, M.A.; Baker, C.C.; Beuligmann, R.F.

    1985-01-01

    The U.S. Dept. of Energy discusses the new program plan, the parameters of which are a broad scientific and technology knowledge base, an attractive plasma configuration to be determined, and other issues concerning uncertainty as to what constitutes attractive fusion options to be determined in the future, and increased collaboration. Tables show changing directions in magnetic fusion energy, two examples of boundary condition impacts on long-term technology development, and priority classes of the latter. The Argonne National Laboratory comments on the relationship between science, technology and the engineering aspects of the fusion program. UCLA remarks on the role of fusion technology in the fusion program plan, particularly on results from the recent studies of FINESSE. General Dynamics offers commentary on the issues of a reduced budget, and new emphasis on science which creates an image of the program. A table illustrates technology research and development in the program plan from an industrial perspective

  18. Technology in L1

    DEFF Research Database (Denmark)

    Elf, Nikolaj Frydensbjerg; Hanghøj, Thorkild; Skaar, Håvard

    2015-01-01

    -of-school literacy practices. A final finding is the emphasis on teacher uncertainty regarding how and why to integrate technology within existing paradigms of the subject. This calls for further research on how technology may be justified in L1 practice, including various forms of teacher education.......In recent decades, several Scandinavian research projects have had an explicit focus on how technology intervenes in L1 (or so-called Mother Tongue Education) practices in Swedish, Norwegian and Danish educational contexts, and how this may impact on understanding of the subject. There is currently...... no systematic overview of the documented possibilities and challenges related to the use of technology in L1. At the same time, there is terminological confusion in use of ‘technology’ and related concepts in L1. Finally, there is a general lack of critical reflection on the relation between technological...

  19. Industrial technology transfer

    International Nuclear Information System (INIS)

    Bulger, W.

    1982-06-01

    The transfer of industrial technology is an essential part of the CANDU export marketing program. Potential customers require the opportunity to become self-sufficient in the supply of nuclear plant and equipment in the long term and they require local participation to the maximum extent possible. The Organization of CANDU Industries is working closely with Atomic Energy of Canada Ltd. in developing comprehensive programs for the transfer of manufacturing technology. The objectives of this program are: 1) to make available to the purchasing country all nuclear component manufacturing technology that exists in Canada; and 2) to assure that the transfer of technology takes place in an efficient and effective way. Technology transfer agreements may be in the form of joint ventures or license agreements, depending upon the requirements of the recipient

  20. Designing Human Technologies

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    Research Initiative supporting Roskilde University’s new Humanities and Technology bachelor programme (‘HumTek’), and its three dimensions: Design, Humanities, and Technology. The research initiative involves 70 researchers from different departments and research groups at Roskilde University through...... a shared interdisciplinary research and educational collaboration. As a creative research initiative it focuses on change and innovative thinking. The innovativeness is a result of the strongly interdisciplinary perspective which is at the heart of Designing Human Technologies. Designing Human Technologies......Design is increasingly becoming a part of the university curriculum and research agenda. The keynote present and discuss Designing Human Technologies – an initiative aiming at establishing a design oriented main subject area alongside traditional main subject areas such as Natural Science...

  1. Art, Technology and Nature

    DEFF Research Database (Denmark)

    Since 1900, the connections between art and technology with nature have become increasingly inextricable. Through a selection of innovative readings by international scholars, this book presents the first investigation of the intersections between art, technology and nature in post-medieval times....... Transdisciplinary in approach, this volume’s 14 essays explore art, technology and nature’s shifting constellations that are discernible at the micro level and as part of a larger chronological pattern. Included are subjects ranging from Renaissance wooden dolls, science in the Italian art academies, and artisanal...... Camilla Skovbjerg Paldam and Jacob Wamberg trace the Kantian heritage of radically separating art and technology, and inserting both at a distance to nature, suggesting this was a transient chapter in history. Thus, they argue, the present renegotiation between art, technology and nature is reminiscent...

  2. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-04-01

    KfK participates to the Fusion Technology Programme of the European Community. Most of the work in progress addresses the Next European Torus (NET) and the long term technology aspects as defined in the 82/86 programme. A minor part serves to preparation of future contributions and to design studies on fusion concepts in a wider perspective. The Fusion Technology Programme of Euratom covers mainly aspects of nuclear engineering. Plasma engineering, heating, refueling and vacuum technology are at present part of the Physics Programme. In view of NET, integration of the different areas of work will be mandatory. KfK is therefore prepared to address technical aspects beyond the actual scope of the physics experiments. The technology tasks are reported project wise under title and code of the Euratom programme. Most of the projects described here are shared with other European fusion laboratories as indicated in the table annexed to this report. (orig./GG)

  3. Energy and technology review

    International Nuclear Information System (INIS)

    Quirk, W.J.; Bookless, W.A.

    1994-05-01

    The Lawrence Livermore National Laboratory, operated by the University of California for the United States Department of Energy, was established in 1952 to do research on nuclear weapons and magnetic fusion energy. Since then, in response to new national needs, we have added other major programs, including technology transfer, laser science (fusion, isotope separation, materials processing), biology and biotechnology, environmental research and remediation, arms control and nonproliferation, advanced defense technology, and applied energy technology. These programs, in turn, require research in basic scientific disciplines, including chemistry and materials science, computing science and technology, engineering, and physics. The Laboratory also carries out a variety of projects for other federal agencies. Energy and Technology Review is published monthly to report on unclassified work in all our programs. This issue reviews work performed in the areas of modified retoring for waste treatment and underground stripping to remove contamination

  4. Globalization and Technology

    Directory of Open Access Journals (Sweden)

    Traian-Alexandru Miu

    2016-01-01

    Full Text Available Globalization, very complex phenomenon, involves overcoming the barriers between different states, which allowed the rapid transfer of capital, technology, information, and the "toxins" from one country to another. First, the technology formed the basis of rapid expansion of great ideas promoted by globalization. Undeniable progress in the field of technology and science, has conferred to the man extraordinary powers that have been used most often to the detriment of his spiritual progress. We must not deny that science and technology have brought many benefits to human, and he could expand the knowledge horizon upon the world in which he lives, exploiting information acquired and share them with others. Science and technology must become for postmodern man ways of talk and communion between human and divinity, all to the praise of God and the perfection of the creature.

  5. Working around technologies

    DEFF Research Database (Denmark)

    Dupret, Katia

    2017-01-01

    expressions of professionals’ active encounter with the complexity of work situations, and can therefore be important signs of professional ethical judgement. Drawing on science and technology studies and the concept of invisible work, the study discusses workaround situations that arise in health care work......This study discusses how professionalism and work ethics influence how health care professionals work around new technologies. When people avoid using technologies, they are not necessarily ceasing to engage in their work activities. The workaround strategies presented here are rather practical...... in Denmark. The aim and contribution of the study is twofold. First, it attempts to revitalise the discussion on technology workaround strategies as responsible professionalism. Second, it will direct attention to and contribute to an understanding of how the normativity embedded in technological development...

  6. Interpretation of Internet technology

    DEFF Research Database (Denmark)

    Madsen, Charlotte Øland

    2001-01-01

    Research scope: The topic of the research project is to investigate how new internet technologies such as e-trade and customer relation marketing and management are implemented in Danish food processing companies. The aim is to use Weick's (1995) sensemaking concept to analyse the strategic...... processes leading to the use of internet marketing technologies and to investigate how these new technologies are interpreted into the organisation. Investigating the organisational socio-cognitive processes underlying the decision making processes will give further insight into the socio......-cognitive competencies of organisations (Rindova & Fombrunn, 1999). The aim is to contribute to the existing technological implementation theory complex by studying the relationships between the elements of the socio-cognitive processes and the resulting interpretations and actions when new technologies are implemented...

  7. 2017 Annual Technology Baseline

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Wesley J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hand, M. M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eberle, Annika [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Beiter, Philipp C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Turchi, Craig S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Feldman, David J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Augustine, Chad R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Maness, Michael [Formerly NREL; O' Connor, Patrick [Oak Ridge National Laboratory

    2018-03-26

    Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), the National Renewable Energy Laboratory annually provides an organized and centralized set of such cost and performance data. The ATB uses the best information from the Department of Energy national laboratories' renewable energy analysts as well as information from the Energy Information Administration for fuel-based technologies. The ATB has been reviewed by experts and it includes the following electricity generation technologies: land-based wind, offshore wind, utility-scale solar photovoltaics (PV), commercial-scale solar PV, residential-scale solar PV, concentrating solar power, geothermal power, hydropower, coal, natural gas, nuclear, and conventional biopower. This webinar presentation introduces the 2017 ATB.

  8. Technology and Sport

    DEFF Research Database (Denmark)

    Møller, Rasmus Bysted; Møller, Verner

    2015-01-01

    The relationship between sport and technology is close and can be both fruitful and destructive. Technology has a constitutive function in sport as it makes the activity possible and it can enhance performance as well as the sporting experience. The use of football boots is clearly more comfortable...... and effective than playing in bare feet in a game of football. However, sport challenges its athletes by demanding the employment of less efficient means rather than more efficient means in pursuit of sport specific goals. Therefore technology can potentially subtract from the sporting experience and even...... has long been a heated topic and with gene technology waiting around the corner the relationship between sport and technology has become strained and is more and more often viewed as problematic rather than benign. In this chapter we follow up on this trend by exposing what we consider a tendency...

  9. Accelerator technology in tokamaks

    International Nuclear Information System (INIS)

    Kustom, R.L.

    1977-01-01

    This article presents the similarities in the technology required for high energy accelerators and tokamak fusion devices. The tokamak devices and R and D programs described in the text represent only a fraction of the total fusion program. The technological barriers to producing successful, economical tokamak fusion power plants are as many as the plasma physics problems to be overcome. With the present emphasis on energy problems in this country and elsewhere, it is very likely that fusion technology related R and D programs will vigorously continue; and since high energy accelerator technology has so much in common with fusion technology, more scientists from the accelerator community are likely to be attracted to fusion problems

  10. Technology for Peacebuilding

    Directory of Open Access Journals (Sweden)

    Helena Puig Larrauri

    2013-11-01

    Full Text Available New technologies are changing how and when we learn about events and choose to respond to them. Mobile phones and the internet have altered how we engage with the world. With technology usage expanding rapidly in the developing world, new avenues of participation, engagement, and accountability are emerging. Globally, more people now have the opportunity to actively make use of these tools to participate in processes that impact their societies. This opportunity for participation is also an opportunity for engaging in new ways with peacebuilding processes. As the field of technology for peacebuilding grows, most attention has been paid to the potential of new technologies for bridging the gap between warning and response. Whilst the focus on the use of technology for early warning and response is important, there is more to this growing field. The empowerment of people to participate in localized conflict management efforts is one of the most significant innovations and opportunities created by new technologies. Technology can contribute to peacebuilding processes by offering tools that foster collaboration, transform attitudes, and give a stronger voice to communities. This article aims to give practitioners two related frameworks to understand how new technologies can enhance peacebuilding. The first section looks at the functions that technology can have in a peacebuilding program as a tool for data processing, communication, engagement, and gaming. We then examine the program areas that new technologies can best contribute to, covering early warning/early response systems, programs that allow citizens to voice their opinions and experiences, collaboration efforts, and programs aimed at transforming attitudes.

  11. Synchrotron X-ray adaptative monochromator: study and realization of a prototype; Monochromateur adaptatif pour rayonnement X synchrotron: etude et realisation d`un prototype

    Energy Technology Data Exchange (ETDEWEB)

    Dezoret, D.

    1995-12-12

    This work presents a study of a prototype of a synchrotron X-ray monochromator. The spectral qualities of this optic are sensitive to the heat loads which are particularly important on third synchrotron generation like ESRF. Indeed, powers generated by synchrotron beams can reach few kilowatts and power densities about a few tens watts per square millimeters. The mechanical deformations of the optical elements of the beamlines issue issue of the heat load can damage their spectral efficiencies. In order to compensate the deformations, wa have been studying the transposition of the adaptive astronomical optics technology to the x-ray field. First, we have considered the modifications of the spectral characteristics of a crystal induced by x-rays. We have established the specifications required to a technological realisation. Then, thermomechanical and technological studies have been required to transpose the astronomical technology to an x-ray technology. After these studies, we have begun the realisation of a prototype. This monochromator is composed by a crystal of silicon (111) bonded on a piezo-electric structure. The mechanical control is a loop system composed by a infrared light, a Shack-Hartmann CDD and wave front analyser. This system has to compensate the deformations of the crystal in the 5 kcV to 60 kcV energy range with a power density of 1 watt per square millimeters. (authors).

  12. Realities and Challenges of Educational Reform in the Province of Quebec: Exploratory Research on Teaching Science and Technology/Realites Et Defis De La Reforme Scolaire Quebecoise: Une Etude Exploratoire De L'Enseignement De La Science...

    Science.gov (United States)

    Potvin, Patrice; Dionne, Eric

    2007-01-01

    Exploratory and descriptive research was conducted in a secondary school to reveal the realities and difficulties of the implementation process that awaits teachers under Quebec's Educational Reform. A team of teachers agreed to be observed while simulating implementation one year ahead of other schools. Results underscore the importance of…

  13. Excursions in technology policy

    Science.gov (United States)

    Archibald, Robert B.

    1995-01-01

    This technical report presents a summary of three distinct projects: (1) Measuring economic benefits; (2) Evaluating the SBIR program; and (3) A model for evaluating changes in support for science and technology. the first project deals with the Technology Applications Group (TAG) at NASA Langley Research Center. The mission of TAG is to assist firms interested in commercializing technologies. TAG is a relatively new group as is the emphasis on technology commercialization for NASA. One problem faced by TAG and similar groups at other centers is measuring their effectiveness. The first project this summer, a paper entitled, 'Measuring the Economic Benefits of Technology Transfer from a National Laboratory: A Primer,' focused on this measurement problem. We found that the existing studies of the impact of technology transfer on the economy were conceptually flawed. The 'primer' outlines the appropriate theoretical framework for measuring the economic benefits of technology transfer. The second project discusses, one of the programs of TAG, the Small Business Innovation Research (SBIR) program. This program has led to over 400 contracts with Small Business since its inception in 1985. The program has never been evaluated. Crucial questions such as those about the extent of commercial successes from the contracts need to be answered. This summer we designed and implemented a performance evaluation survey instrument. The analysis of the data will take place in the fall. The discussion of the third project focuses on a model for evaluating changes in support for science and technology. At present several powerful forces are combining to change the environment for science and technology policy. The end of the cold war eliminated the rationale for federal support for many projects. The new- found Congressional conviction to balance the budget without tax increases combined with demographic changes which automatically increase spending for some politically popular programs

  14. Communication technology update and fundamentals

    CERN Document Server

    Grant, August E

    2010-01-01

    New communication technologies are being introduced at an astonishing rate. Making sense of these technologies is increasingly difficult. Communication Technology Update and Fundamentals is the single best source for the latest developments, trends, and issues in communication technology. Featuring the fundamental framework along with the history and background of communication technologies, Communication Technology Update and Fundamentals, 12th edition helps you stay ahead of these ever-changing and emerging technologies.As always, every chapter ha

  15. United States advanced technologies

    International Nuclear Information System (INIS)

    Longenecker, J.R.

    1985-01-01

    In the United States, the advanced technologies have been applied to uranium enrichment as a means by which it can be assured that nuclear fuel cost will remain competitive in the future. The United States is strongly committed to the development of advanced enrichment technology, and has brought both advanced gas centrifuge (AGC) and atomic vapor laser isotope separation (AVLIS) programs to a point of significant technical refinement. The ability to deploy advanced technologies is the basis for the confidence in competitive future price. Unfortunately, the development of advanced technologies is capital intensive. The year 1985 is the key year for advanced technology development in the United States, since the decision on the primary enrichment technology for the future, AGC or AVLIS, will be made shortly. The background on the technology selection process, the highlights of AGC and AVLIS programs and the way to proceed after the process selection are described. The key objective is to maximize the sales volume and minimize the operating cost. This will help the utilities in other countries supply low cost energy on a reliable, long term basis. (Kako, I.)

  16. Technology and medicine.

    Science.gov (United States)

    Booth, C

    1985-05-22

    Technology, which is older than science, has been of vital importance in the development of modern medicine. Even so, there are voices of dissent to be heard. The disenchantment with technology expressed by Aldous Huxley in Brave new world has been echoed by contemporary writers on the technology of modern medicine. Medicine is seen by some to have been dehumanized by technology, and techniques that are expensive are thought to be consuming a greater proportion of health resources than they deserve. The practice of medicine has, nevertheless, been transformed by modern technology and diagnostic techniques and therapeutic measures undreamed of a few short decades ago are now commonplace. There is no reason why these developments should be any more dehumanizing than the use of similar techniques in modern transportation or communication, nor is their expense out of proportion when compared with other demands on the nation's purse. British workers have been at the forefront of many recent advances. Yet, even though the National Health Service provides a ready market for the products of British medical technology, the nation depends to an inordinate degree on imported products. In the development of appropriate medical technology there is an urgent need for better communication between inventors, scientists, industrialists and the National Health Service. At the same time there is an equal need for improved evaluation of untried techniques. The pressure for a central integrating body to coordinate resources could well be supported by the establishment of evaluation units in the different health authorities in this country.

  17. The technology vicinity: a location based view on technology

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.; Kocaoglu, D.F.; Anderson, T.R.

    2001-01-01

    The issue of technology transfer has been viewed from many different perspectives. In this case the focus is on the process of (production) technology transfer. One of the difficulties in studying international technology transfer is the definition of technology. The many technology definitions that

  18. COPPER CABLE RECYCLING TECHNOLOGY

    International Nuclear Information System (INIS)

    Chelsea Hubbard

    2001-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in deactivation and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors large-scale demonstration and deployment projects (LSDDPs). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) generated a list of statements defining specific needs and problems where improved technology could be incorporated into ongoing D and D tasks. One such need is to reduce the volume of waste copper wire and cable generated by D and D. Deactivation and decommissioning activities of nuclear facilities generates hundreds of tons of contaminated copper cable, which are sent to radioactive waste disposal sites. The Copper Cable Recycling Technology separates the clean copper from contaminated insulation and dust materials in these cables. The recovered copper can then be reclaimed and, more importantly, landfill disposal volumes can be reduced. The existing baseline technology for disposing radioactively contaminated cables is to package the cables in wooden storage boxes and dispose of the cables in radioactive waste disposal sites. The Copper Cable Recycling Technology is applicable to facility decommissioning projects at many Department of Energy (DOE) nuclear facilities and commercial nuclear power plants undergoing decommissioning activities. The INEEL Copper Cable Recycling Technology Demonstration investigated the effectiveness and efficiency to recycle 13.5 tons of copper cable. To determine the effectiveness

  19. Emergent technologies: 25 years

    Science.gov (United States)

    Rising, Hawley K.

    2013-03-01

    This paper will talk about the technologies that have been emerging over the 25 years since the Human Vision and Electronic Imaging conference began that the conference has been a part of, and that have been a part of the conference, and will look at those technologies that are emerging today, such as social networks, haptic technologies, and still emerging imaging technologies, and what we might look at for the future.Twenty-five years is a long time, and it is not without difficulty that we remember what was emerging in the late 1980s. Yet to be developed: The first commercial digital still camera was not yet on the market, although there were hand held electronic cameras. Personal computers were not displaying standardized images, and image quality was not something that could be talked about in a standardized fashion, if only because image compression algorithms were not standardized yet for several years hence. Even further away were any standards for movie compression standards, there was no personal computer even on the horizon which could display them. What became an emergent technology and filled many sessions later, image comparison and search, was not possible, nor the current emerging technology of social networks- the world wide web was still several years away. Printer technology was still devising dithers and image size manipulations which would consume many years, as would scanning technology, and image quality for both was a major issue for dithers and Fourier noise.From these humble beginnings to the current moves that are changing computing and the meaning of both electronic devices and human interaction with them, we will see a course through the changing technology that holds some features constant for many years, while others come and go.

  20. Digital security technology simplified.

    Science.gov (United States)

    Scaglione, Bernard J

    2007-01-01

    Digital security technology is making great strides in replacing analog and other traditional security systems including CCTV card access, personal identification and alarm monitoring applications. Like any new technology, the author says, it is important to understand its benefits and limitations before purchasing and installing, to ensure its proper operation and effectiveness. This article is a primer for security directors on how digital technology works. It provides an understanding of the key components which make up the foundation for digital security systems, focusing on three key aspects of the digital security world: the security network, IP cameras and IP recorders.

  1. Buildings Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Emmanuel, L. [eds.

    1996-11-01

    BET announces on a monthly basis current worldwide information available on the technology required for economic energy conservation in buildings and communities. It contains abstracts of DOE reports, journal articles, conference papers,patents,theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through IEA`s Energy Technology Data Exchange or government- to-government agreements. The citations are available for online searching and retrieval; current information, added daily, is available to DOE and its contractors.

  2. Information Technology Service

    International Nuclear Information System (INIS)

    Ageron, M.; Boninchi, V.; Chartoire, M.; Combroux, A.; Giraud, N.; Jacquet, G.; Lagrange, B.; Malleret, S.; Martin, C.; Mas, J.; Morgue, M.; Ollivier, T.

    1998-01-01

    The information technology service works out the choices concerning the information technology systems of general use in the laboratory: computers, network, peripherals, workstations, software. It intervenes at the same time in the definition of the procedures and equipment specific to the research groups. The entire data acquisition is centralized by the service. The personnel is sharing the following two large directions of activities: - management of information technology park (setup, configuration and maintenance of the materials and soft ensemble, training and assistance afforded to users); - participation in software projects either in elaboration of applications or in realization and maintenance of specific tools

  3. Educational technology, reimagined.

    Science.gov (United States)

    Eisenberg, Michael

    2010-01-01

    "Educational technology" is often equated in the popular imagination with "computers in the schools." But technology is much more than merely computers, and education is much more than mere schooling. The landscape of child-accessible technologies is blossoming in all sorts of directions: tools for communication, for physical construction and fabrication, and for human-computer interaction. These new systems and artifacts allow educational designers to think much more creatively about when and where learning takes place in children's lives, both within and outside the classroom.

  4. ACCELERATING NANO-TECHNOLOGICAL

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing; Koch, Christian

    2007-01-01

    By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which concludes...... of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support “incubation rooms” or marked niches in order...

  5. Bridge technology report

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. As LANs have proliferated, new technologies and system concepts have come to the fore. One of the key issues is how to interconnect networks. One means of interconnection is to use a 'bridge'. Other competing technologies are repeaters, routers, and gateways. Bridges permit traffic isolation, connect network segments together and operate at the MAC layer. Further, because they operate at the MAC layer, they can handle a variety of protocols such as TCP/IP, SNA, and X.25. This report focuses on the specific technology of bridging two netw

  6. Calculations in furnace technology

    CERN Document Server

    Davies, Clive; Hopkins, DW; Owen, WS

    2013-01-01

    Calculations in Furnace Technology presents the theoretical and practical aspects of furnace technology. This book provides information pertinent to the development, application, and efficiency of furnace technology. Organized into eight chapters, this book begins with an overview of the exothermic reactions that occur when carbon, hydrogen, and sulfur are burned to release the energy available in the fuel. This text then evaluates the efficiencies to measure the quantity of fuel used, of flue gases leaving the plant, of air entering, and the heat lost to the surroundings. Other chapters consi

  7. Technology transfer and innovation

    International Nuclear Information System (INIS)

    Ashworth, Graham; Thornton, Anna

    1987-01-01

    The aims of the conference were advice, assistance and action for all those with technology to licence or inventions to patent, and for people seeking financial help and advice. There was a free exchange of ideas and information. Of the forty or so papers collected together, many are concerned with the financial aspects of new ventures, others look at technology transfer from academic institutes and schemes which support technological problems. One paper on fast reactor collaboration in Europe, is indexed separately. (U.K.)

  8. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1985-05-01

    In the current Fusion Technology Programme of the European Community the KfK association is working at present on 16 R and D contracts. Most of the work is strongly oriented towards the Next European Torus. Direct support to NET is given by three KfK delegates being member of the NET study group. In addition to the R and D contracts the association is working on 11 NET study contracts. Though KfK contributes to all areas defined in fusion technology, the main emphasis is put on superconducting magnet and breeding blanket development. Other important fields are tritium technology, materials research, and remote handling. (orig./GG)

  9. Communications technology handbook

    CERN Document Server

    Lewis, Geoff

    2013-01-01

    This is the first point of reference for the communications industries. It offers an introduction to a wide range of topics and concepts encountered in the field of communications technology. Whether you are looking for a simple explanation, or need to go into a subject in more depth, the Communications Technology Handbook provides all the information you need in one single volume.This second edition has been updated to include the latest technology including: Video on DemandWire-less Distribution systemsHigh spee

  10. Introduction to Pinch Technology

    DEFF Research Database (Denmark)

    Rokni, Masoud

    ? How to put energy efficiency and other targets like reducing emissions, increasing plant capacities, improve product qualities etc, into a one coherent strategic plan for the overall site? All these questions and more can be answered with a full understanding of Pinch Technology and an awareness...... of the available tools for applying it in a practical way. The aim here is to provide the basic knowledge of pinch technology concept and how it can be applied across a wide range of process industries. The pinch technology was proposed firstly for optimization of heat exchangers and therefore it is introduced...

  11. Advances in Gyroscope Technologies

    CERN Document Server

    Armenise, Mario N; Dell'Olio, Francesco; Passaro, Vittorio MN

    2011-01-01

    This monograph collects and critically reviews the main results obtained by the scientific community in gyroscope technologies research field. It describes architectures, design techniques and fabrication technology of angular rate sensors proposed in literature. MEMS, MOEMS, optical and mechanical technologies are discussed together with achievable performance. The book also considers future research trends aimed to cover special applications. The book is intended for researchers and Ph.D. students interested in modelling, design and fabrication of gyros. The book may be a useful education su

  12. Victory of autonomy technology

    International Nuclear Information System (INIS)

    2009-04-01

    This book introduces story of an inventor, Jang, Yeong Sil, Screening of Jang, Yeong Sil award and prize-winning companies and titles, which are high flow blend resin by LG chemical company, lithium-ion polymer battery for MP3P by Samsung SDI Inc, tower mounted amplifier by ACE technology Inc, intelligent public access defibrillator by CU medical Inc, contrast enhanced phosphor by LG Inc, solid state drive for auxiliary memory by MTRON storage technology Co. LTD, and Selicion by Samsung fine chemistry, and new era of development of scientific technology.

  13. Benchmarking semantic web technology

    CERN Document Server

    García-Castro, R

    2009-01-01

    This book addresses the problem of benchmarking Semantic Web Technologies; first, from a methodological point of view, proposing a general methodology to follow in benchmarking activities over Semantic Web Technologies and, second, from a practical point of view, presenting two international benchmarking activities that involved benchmarking the interoperability of Semantic Web technologies using RDF(S) as the interchange language in one activity and OWL in the other.The book presents in detail how the different resources needed for these interoperability benchmarking activities were defined:

  14. Strategic Health Technology Incorporation

    CERN Document Server

    Wang, Binseng

    2009-01-01

    Technology is essential to the delivery of health care but it is still only a tool that needs to be deployed wisely to ensure beneficial outcomes at reasonable costs. Among various categories of health technology, medical equipment has the unique distinction of requiring both high initial investments and costly maintenance during its entire useful life. This characteristic does not, however, imply that medical equipment is more costly than other categories, provided that it is managed properly. The foundation of a sound technology management process is the planning and acquisition of equipment

  15. Power generation technologies

    CERN Document Server

    Breeze, Paul

    2014-01-01

    The new edition of Power Generation Technologies is a concise and readable guide that provides an introduction to the full spectrum of currently available power generation options, from traditional fossil fuels and the better established alternatives such as wind and solar power, to emerging renewables such as biomass and geothermal energy. Technology solutions such as combined heat and power and distributed generation are also explored. However, this book is more than just an account of the technologies - for each method the author explores the economic and environmental costs and risk factor

  16. Desalination processes and technologies

    International Nuclear Information System (INIS)

    Furukawa, D.H.

    1996-01-01

    Reasons of the development of desalination processes, the modern desalination technologies, such as multi-stage flash evaporation, multi-effect distillation, reverse osmosis, and the prospects of using nuclear power for desalination purposes are discussed. 9 refs

  17. Superconducting Technology Assessment

    National Research Council Canada - National Science Library

    2005-01-01

    This Superconducting Technology Assessment (STA) has been conducted by the National Security Agency to address the fundamental question of a potential replacement for silicon complementary metal oxide semiconductor (CMOS...

  18. International monitoring of technology

    International Nuclear Information System (INIS)

    Fischer, W.; Stein, G.

    1990-01-01

    The monitoring of the civilian nuclear energy sector has been effected successfully by IAEA and EURATOM and has contributed to a reduction of fears within the communities of nations. Certainly, it will not be possible to subject the whole world and whole spectrum of technology to monitoring. However, the nations should be enabled to reduce their greatest fears concerning an abuse and a misuse of technology by verification, and to check the compliance with such international agreements which regulate the application of a number of technologies. There are some (as yet rudimentary) approaches to an international verification in the field of environmental protection and resource policies. Nuclear energy with its sophisticated verification procedure has taken one great step ahead of the other fields. The strengths and weaknesses of its verification regime should be learned from when filling the virgin fields of international technology monitoring and its instrument, i.e. international verification. (orig./HSCH) [de

  19. Ocean Technology Development Tank

    Data.gov (United States)

    Federal Laboratory Consortium — The new SWFSC laboratory in La Jolla incorporates a large sea- and fresh-water Ocean Technology Development Tank. This world-class facility expands NOAA's ability to...

  20. Harwell directory of technology

    International Nuclear Information System (INIS)

    1988-02-01

    The Directory of Technology series of leaflets (10 in this folder) provides comprehensive information on the research and development facilities and expertise available at the Harwell laboratory of the United Kingdom Atomic Energy Authority. Each leaflet covers a field of technology and lists the Business Centres and related customer services offered. The leaflets are Process and Chemical Engineering Technology, Materials Technology, Evaluation and Monitoring Techniques and Instrumentation, Computing Science and Applications, Environmental, Medical and Analytical Sciences, Nuclear Engineering, Reactor Materials Behaviour and Safety Research, Radioactive Waste Management and Disposal, Nuclear Fuels Processing and Isotopes, Major Nuclear research and development facilities. There is a cross-referenced index which provides information to enable contact to be made with the appropriate business centre manager. (U.K.)