Annual Technology Baseline (Including Supporting Data); NREL (National Renewable Energy Laboratory)

Energy Technology Data Exchange (ETDEWEB)

Blair, Nate; Cory, Karlynn; Hand, Maureen; Parkhill, Linda; Speer, Bethany; Stehly, Tyler; Feldman, David; Lantz, Eric; Augusting, Chad; Turchi, Craig; O' Connor, Patrick

2015-07-08

Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), National Renewable Energy Laboratory provides an organized and centralized dataset that was reviewed by internal and external experts. It uses the best information from the Department of Energy laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information. The ATB includes both a presentation with notes (PDF) and an associated Excel Workbook. The ATB includes the following electricity generation technologies: land-based wind; offshore wind; utility-scale solar PV; concentrating solar power; geothermal power; hydropower plants (upgrades to existing facilities, powering non-powered dams, and new stream-reach development); conventional coal; coal with carbon capture and sequestration; integrated gasification combined cycle coal; natural gas combustion turbines; natural gas combined cycle; conventional biopower. Nuclear laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information.

76 FR 175 - Faurecia Emissions Control Technologies Including On-Site Leased Workers From Adecco Employment...

Science.gov (United States)

2011-01-03

... Technologies Including On-Site Leased Workers From Adecco Employment Servcies and Emcon Technologies, Troy, MI..., applicable to workers of Faurecia Emissions Control Technologies, Troy, Michigan, including on-site leased workers from Adecco Employment Services, Troy, Michigan. The Department's notice of determination was...

A Discussion of Oxygen Recovery Definitions and Key Performance Parameters for Closed-Loop Atmosphere Revitalization Life Support Technology Development

Science.gov (United States)

Abney, Morgan B.; Perry, Jay L.

2016-01-01

Over the last 55 years, NASA has evolved life support for crewed space exploration vehicles from simple resupply during Project Mercury to the complex and highly integrated system of systems aboard the International Space Station. As NASA targets exploration destinations farther from low Earth orbit and mission durations of 500 to 1000 days, life support systems must evolve to meet new requirements. In addition to having more robust, reliable, and maintainable hardware, limiting resupply becomes critical for managing mission logistics and cost. Supplying a crew with the basics of food, water, and oxygen become more challenging as the destination ventures further from Earth. Aboard ISS the Atmosphere Revitalization Subsystem (ARS) supplies the crew's oxygen demand by electrolyzing water. This approach makes water a primary logistics commodity that must be managed carefully. Chemical reduction of metabolic carbon dioxide (CO2) provides a method of recycling oxygen thereby reducing the net ARS water demand and therefore minimizing logistics needs. Multiple methods have been proposed to achieve this recovery and have been reported in the literature. However, depending on the architecture and the technology approach, "oxygen recovery" can be defined in various ways. This discontinuity makes it difficult to compare technologies directly. In an effort to clarify community discussions of Oxygen Recovery, we propose specific definitions and describe the methodology used to arrive at those definitions. Additionally, we discuss key performance parameters for Oxygen Recovery technology development including challenges with comparisons to state-of-the-art.

Using Technology to Support Discussions on Sensitive Topics in the Study of Business Ethics

Directory of Open Access Journals (Sweden)

Michelle WL Fong

2015-06-01

Full Text Available There is a dearth of research into teaching strategies and learning approaches for units involving sensitive topics that can provoke an emotional response in students. In a business ethics unit, attempts to strike a balance between conceptual knowledge and theory and skills training can be challenging because the unit can involve personal, sensitive or controversial topics. When engaging in deep and meaningful face-to-face discussion, students may unknowingly divulge personal opinions that they later regret or become identified with by other students over time. Value-laden topics may also lead to clashes between students if face-to-face discussions are not managed properly. This paper considers the use of technology in blended learning to provide an optimal learning environment for student discussion on sensitive topics via role-play and simulation in a first-year business ethics unit. The Audience Response System (ARS, online discussion boards and blogs, and wikis are assessed for their suitability in supporting online role-play and simulation. Among these online tools, asynchronous online discussion boards and blogs are the ideal tools for supporting student discussion on sensitive topics in online role-play and simulation.

Panel discussion

International Nuclear Information System (INIS)

Anon.

1980-01-01

The panel discussion at the 10th Allianz Forum on 'Technology and Insurance' dealt with the following topics: New technologies: energy conversion (coal, petroleum, natural gas, nuclear energy, solar energy); infrastructure (transport, data processing); basic products (metallic materials, chemical products, pharmaceutical products); integrated products (microprocessors, production line machines) as well as new risks: political; general economic (financing, market structure); insurance-related, dangers to persons and property; reduction of risks. (orig.) [de

Expanding Health Technology Assessments to Include Effects on the Environment.

Science.gov (United States)

Marsh, Kevin; Ganz, Michael L; Hsu, John; Strandberg-Larsen, Martin; Gonzalez, Raquel Palomino; Lund, Niels

2016-01-01

There is growing awareness of the impact of human activity on the climate and the need to stem this impact. Public health care decision makers from Sweden and the United Kingdom have started examining environmental impacts when assessing new technologies. This article considers the case for incorporating environmental impacts into the health technology assessment (HTA) process and discusses the associated challenges. Two arguments favor incorporating environmental impacts into HTA: 1) environmental changes could directly affect people's health and 2) policy decision makers have broad mandates and objectives extending beyond health care. Two types of challenges hinder this process. First, the nascent evidence base is insufficient to support the accurate comparison of technologies' environmental impacts. Second, cost-utility analysis, which is favored by many HTA agencies, could capture some of the value of environmental impacts, especially those generating health impacts, but might not be suitable for addressing broader concerns. Both cost-benefit and multicriteria decision analyses are potential methods for evaluating health and environmental outcomes, but are less familiar to health care decision makers. Health care is an important and sizable sector of the economy that could warrant closer policy attention to its impact on the environment. Considerable work is needed to track decision makers' demands, augment the environmental evidence base, and develop robust methods for capturing and incorporating environmental data as part of HTA. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Newnes communications technology handbook

CERN Document Server

Lewis, Geoff

1994-01-01

Newnes Communications Technology Handbook provides a discussion on different topics relevant to communications technology. The book is comprised of 39 chapters that tackle a wide variety of concern in communications technology. The coverage of the text includes technologies, such as analog digital communications systems, radio frequency receiver, and satellite systems. The book also discusses some methods and techniques used in communications technology, including mixer signal processing, modulation and demodulation, and spread spectrum techniques. The text will be of great use to engineers, t

Using virtual reality technology to include field operators in simulation and training

International Nuclear Information System (INIS)

Nystad, E.; Strand, S.

2006-01-01

By using virtual reality technology, field operators can be included in simulator training. A study has been performed where field operators could perform their activities in a virtual plant and communicate with a control room operator who was placed in a physical control room simulator. This paper describes the use of VR technology in the study and how the operators experienced interacting with the virtual plant. (author)

75 FR 43555 - Experian, Global Technology Services, a Subsidiary of Experian, Including a Leased Employee From...

Science.gov (United States)

2010-07-26

... Technology Services, a Subsidiary of Experian, Including a Leased Employee From Tapfin Working Off-Site in... Experian, Global Technology Services, a subsidiary of Experian, including on-site leased workers from... control of the Schaumburg, Illinois location of Experian, Global Technology Services, a subsidiary of...

Technology Estimating: A Process to Determine the Cost and Schedule of Space Technology Research and Development

Science.gov (United States)

Cole, Stuart K.; Reeves, John D.; Williams-Byrd, Julie A.; Greenberg, Marc; Comstock, Doug; Olds, John R.; Wallace, Jon; DePasquale, Dominic; Schaffer, Mark

2013-01-01

NASA is investing in new technologies that include 14 primary technology roadmap areas, and aeronautics. Understanding the cost for research and development of these technologies and the time it takes to increase the maturity of the technology is important to the support of the ongoing and future NASA missions. Overall, technology estimating may help provide guidance to technology investment strategies to help improve evaluation of technology affordability, and aid in decision support. The research provides a summary of the framework development of a Technology Estimating process where four technology roadmap areas were selected to be studied. The framework includes definition of terms, discussion for narrowing the focus from 14 NASA Technology Roadmap areas to four, and further refinement to include technologies, TRL range of 2 to 6. Included in this paper is a discussion to address the evaluation of 20 unique technology parameters that were initially identified, evaluated and then subsequently reduced for use in characterizing these technologies. A discussion of data acquisition effort and criteria established for data quality are provided. The findings obtained during the research included gaps identified, and a description of a spreadsheet-based estimating tool initiated as a part of the Technology Estimating process.

Using assistive technology adaptations to include students with learning disabilities in cooperative learning activities.

Science.gov (United States)

Bryant, D P; Bryant, B R

1998-01-01

Cooperative learning (CL) is a common instructional arrangement that is used by classroom teachers to foster academic achievement and social acceptance of students with and without learning disabilities. Cooperative learning is appealing to classroom teachers because it can provide an opportunity for more instruction and feedback by peers than can be provided by teachers to individual students who require extra assistance. Recent studies suggest that students with LD may need adaptations during cooperative learning activities. The use of assistive technology adaptations may be necessary to help some students with LD compensate for their specific learning difficulties so that they can engage more readily in cooperative learning activities. A process for integrating technology adaptations into cooperative learning activities is discussed in terms of three components: selecting adaptations, monitoring the use of the adaptations during cooperative learning activities, and evaluating the adaptations' effectiveness. The article concludes with comments regarding barriers to and support systems for technology integration, technology and effective instructional practices, and the need to consider technology adaptations for students who have learning disabilities.

76 FR 2144 - Quest Diagnostics, Inc. Information Technology Help Desk Services Including On-Site Leased...

Science.gov (United States)

2011-01-12

.... Information Technology Help Desk Services Including On-Site Leased Workers From Modis, West Norriton, PA..., applicable to workers of Quest Diagnostics, Inc., Information Technology Help Desk Services, West Norriton... Quest Diagnostics, Inc., Information Technology Help Desk [[Page 2145

Are You Ready To Discuss IT Outsourcing on Your Campus?

Science.gov (United States)

McCord, Alan

2002-01-01

Explores why the idea of outsourcing campus information technology (IT) services rouses opinions and passions best handled by informed dialogue. Discusses how to conduct this dialog, including common myths about outsourcing and useful lessons. (EV)

Technological Literacy and Human Cloning. Resources in Technology.

Science.gov (United States)

Baird, Steven L.

2002-01-01

Discusses how technology educators can deal with advances in human genetics, specifically, cloning. Includes a definition and history of cloning, discusses its benefits, and looks at social concerns and arguments for and against human cloning. Includes classroom activities and websites. (Contains 10 references.) (JOW)

Microwave Technology for Waste Management Applications Including Disposition of Electronic Circuitry

International Nuclear Information System (INIS)

Wicks, G.G.; Clark, D.E.; Schulz, R.L.

1998-01-01

Advanced microwave technology is being developed nationally and internationally for a variety of waste management and environmental remediation purposes. These efforts include treatment and destruction of a vast array of gaseous, liquid and solid hazardous wastes as well as subsequent immobilization of hazardous components into leach resistant forms. Microwave technology provides an important contribution to an arsenal of existing remediation methods that are designed to protect the public and environment from the undesirable consequences of hazardous materials. One application of special interest is the treatment of discarded electronic circuitry using a new hybrid microwave treatment process and subsequent reclamation of the precious metals within

Discussion on the application potential of thermal infrared remote sensing technology in uranium deposits exploration

International Nuclear Information System (INIS)

Wang Junhu; Zhang Jielin; Liu Dechang

2011-01-01

With the continual development of new thermal infrared sensors and thermal radiation theory, the technology of thermal infrared remote sensing has shown great potential for applications in resources exploration, especially in the field of uranium exploration. The paper makes a systemic summary of the theoretical basis and research status of the thermal infrared remote sensing applications in resources exploration from the surface temperature, thermal inertia and thermal infrared spectrum. What's more, the research objective and the research content of thermal infrared remote sensing in the uranium deposits exploration applications are discussed in detail. Besides, based on the thermal infrared ASTER data, the paper applies this technology to the granite-type uranium deposits in South China and achieves good result. Above all, the practice proves that the thermal infrared remote sensing technology has a good application prospects and particular value in the field of uranium prospecting and will play an important role in the prospecting target of the uranium deposits. (authors)

Investigation of Techno-Stress Levels of Teachers Who Were Included in Technology Integration Processes

Science.gov (United States)

Çoklar, Ahmet Naci; Efilti, Erkan; Sahin, Yusef Levent; Akçay, Arif

2016-01-01

Techno-stress is defined as a modern adaptation disorder resulting from the failure in coping with new technologies in a healthy way. Techno-stress affects many occupational groups, including teachers. FATIH project and many other previous studies conducted in Turkey in recent years have necessitated the use of technology for teachers. The present…

Childhood obstructive sleep-disordered breathing: a clinical update and discussion of technological innovations and challenges.

Science.gov (United States)

Halbower, Ann C; Ishman, Stacey L; McGinley, Brian M

2007-12-01

Childhood sleep-disordered breathing (SDB) has been known to be associated with health and cognitive impacts for more than a century, and yet our understanding of this disorder is in its infancy. Neuropsychological consequences in children with snoring or subtle breathing disturbances not meeting the traditional definition of sleep apnea suggest that "benign, or primary snoring" may be clinically significant, and that the true prevalence of SDB might be underestimated. There is no standard definition of SDB in children. The polysomnographic technology used in many sleep laboratories may be inadequate to diagnose serious but subtle forms of clinically important airflow limitation. In the last several years, advances in digital technology as well as new observational studies of respiratory and arousal patterns in large populations of healthy children have led to alternative views of what constitutes sleep-related breathing and arousal abnormalities that may refine our diagnostic criteria. This article reviews our knowledge of childhood SDB, highlights recent advances in technology, and discusses diagnostic and treatment strategies that will advance the management of children with pediatric SDB.

Positive technology–A powerful partnership between positive psychology and interactive technology. A discussion of potential and challenges.

Directory of Open Access Journals (Sweden)

Sarah Diefenbach

2017-11-01

Full Text Available Under the umbrella term "positive computing" concepts of positive psychology are transferred to the domain of human-computer interaction (HCI. In an interdisciplinary community psychologist, computer scientists, designers and others are exploring promising ways how to utilize interactive technology to support wellbeing and human flourishing. Along with this, the recent popularity of smartphone apps aiming at the improvement of health behavior, mindfulness and positive routines, suggests the general acceptance of technology as a facilitator of personal development. Given this, there generally seems a high potential for a technology mediated trigger of positive behavior change, especially in context of positive psychology and resource oriented approaches such as solution-focused coaching. At the same time, there is still a lack of well-founded approaches to design such technology which consider its responsible role as an "interactive coach" and systematically integrate the needed expertise of different disciplines. The present article discusses the general potential and particular challenges to support the goals of positive psychology and human desire for self-improvement through interactive technology and highlights critical steps for a successful partnership between both.

76 FR 32227 - DST Systems, Inc., Including On-Site Leased Workers From Comsys Information Technology Services...

Science.gov (United States)

2011-06-03

..., Inc., Including On-Site Leased Workers From Comsys Information Technology Services, Megaforce, and Kelly Services Kansas City, MO; DST Technologies, a Wholly Owned Subsidiary of DST Systems, Inc., Boston... Information Technology Services, Megaforce, and Kelly Services, Kansas City, Missouri (subject firm). The...

[Discussion on appraisal methods and key technologies of arbuscular mycorrhizal fungi and medicinal plant symbiosis system].

Science.gov (United States)

Chen, Meilan; Guo, Lanping; Yang, Guang; Chen, Min; Yang, Li; Huang, Luqi

2011-11-01

Applications of arbuscular mycorrhizal fungi in research of medicinal plant cultivation are increased in recent years. Medicinal plants habitat is complicated and many inclusions are in root, however crop habitat is simple and few inclusions in root. So appraisal methods and key technologies about the symbiotic system of crop and arbuscular mycorrhizal fungi can't completely suitable for the symbiotic system of medicinal plants and arbuscular mycorrhizal fungi. This article discuss the appraisal methods and key technologies about the symbiotic system of medicinal plant and arbuscular mycorrhizal fungi from the isolation and identification of arbuscular mycorrhiza, and the appraisal of colonization intensity. This article provides guidance for application research of arbuscular mycorrhizal fungi in cultivation of medicinal plants.

Discussion meet on electroanalytical techniques and their applications

International Nuclear Information System (INIS)

Aggarwal, S.K.; Gopinath, N.; Govindan, R.

2008-02-01

Electrochemistry is truly an interdisciplinary science and plays an important role in different branches of science and technology. The present Discussion Meet on ElectroAnalytical Techniques (DM- ELANTE-2008) is focused on the update of various electroanalytical techniques which have brought out a substantial change in electroanalytical chemistry. The aim of this Discussion Meet is to provide a forum to all the electroanalytical scientists to discuss their recent findings and information, learn from the mutual experiences and interests, and to promote cooperation both nationally and internationally. It is proposed to have tutorial lectures as well as invited talks during the Discussion Meet on various electroanalytical techniques including Electrochemical Impedance Spectroscopy (EIS), Spectro-electrochemistry, Scanning Electrochemical Microscopy (SECM), Electrochemical Quartz Crystal Microbalance (EQCM), Surface Plasmon Resonance (SPR) etc. Papers relevant to INIS are indexed separately

Technology development in the field of tension between its intrinsic dynamics and the goals defined in the public discussion

International Nuclear Information System (INIS)

Joerges, B.; Bechmann, G.; Hohlfeld, R.

1985-01-01

Taking the three examples of nuclear energy, microelectronics and genetic engineering, an analytic perspective is proposed which goes beyond conventional technology assessment. A comparative approach to the analysis of these three consecutive developments is suggested focusing on their physical and social substitutional functions, relevant actor games and control mechanisms, and cultural assimilation. Finally, the issue of 'autonomy' or 'Eigendynamik' of modern science and technology is discussed. (orig.) [de

Innovation for a better life: IdeaSquare to host a panel discussion for the 2016 Millennium Technology Prize

CERN Multimedia

Antonella Del Rosso

2015-01-01

The one-million-euro Millennium Technology Prize promotes technological innovations that improve the quality of people’s lives. A series of panel discussions are being held worldwide to draw attention to the themes of the prize and to promote nominations for high-calibre candidates for the 2016 award. For the first time, IdeaSquare has been chosen as one of the venues and CERN people are invited to take part. Save the date: 30 June, 3 p.m.   The Millennium Technology Prize was established in 2004 by the Technology Academy Finland (TAF), an independent foundation whose mission is “to promote innovations that improve the quality of people’s lives in a sustainable manner”. Awarded every other year, the prize has already recognised the work of seven great innovators who developed technological innovations to tackle the great challenges of mankind: learning, health and a clean environment. The first prize was awarded to Tim Berners-Lee for the World Wide Web. E...

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Science.gov (United States)

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

Traditional methods v. new technologies - dilemmas for dietary assessment in large-scale nutrition surveys and studies: a report following an international panel discussion at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, 3 September 2015.

Science.gov (United States)

Amoutzopoulos, B; Steer, T; Roberts, C; Cade, J E; Boushey, C J; Collins, C E; Trolle, E; de Boer, E J; Ziauddeen, N; van Rossum, C; Buurma, E; Coyle, D; Page, P

2018-01-01

The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion 'Traditional methods v. new technologies: dilemmas for dietary assessment in population surveys', was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer potential advantages including faster data processing and better data quality. This is a fast-moving field and there is evidence of increasing demand for the use of new technologies amongst the general public and researchers. There is a need for research and investment to support efforts being made to facilitate the inclusion of new technologies for rapid, accurate and representative data.

Critical Discussion of Essentials of Diagnosis and Recording in Periodontics.

Science.gov (United States)

Ellen, Richard P.

1994-01-01

Issues to be addressed before writing standards of care for the diagnosis of adult periodontal disease are discussed. These include considerations in screening and examination; arriving at diagnosis and prognosis, informing the patient, and referral; monitoring outcomes using diagnostic signs and tests; and new technology for and approaches to…

Discussion of environmental impact assessment for the nuclear technology application in hospital

International Nuclear Information System (INIS)

Li Shaoting; Xu Zhongyang

2010-01-01

Medical use of ionizing radiation has become the greatest artificial radiation in the world. Based on the characteristics of the nuclear technology application in hospital the content of the environmental impact assessment has been stated, including identification of the environmental impact factor, the standard, the environmental impact, control of the pollution as well. The dose of the medical staff which engaged in interventional operation and the accompanies of the patients which received nuclear medicine treatment should be focused on. (authors)

Theme: Emerging Technologies.

Science.gov (United States)

Malpiedi, Barbara J.; And Others

1989-01-01

Consists of six articles discussing the effect of emerging technologies on agriculture. Specific topics include (1) agriscience programs, (2) the National Conference on Agriscience and Emerging Occupations and Technologies, (3) biotechnology, (4) program improvement through technology, (5) the Agriscience Teacher of the Year program, and (6)…

Script of Healthcare Technology: Do Designs of Robotic Beds Exclude or Include Users?

DEFF Research Database (Denmark)

Brodersen, Søsser Grith Kragh; Hansen, Meiken; Lindegaard, Hanne

2015-01-01

Many new product designs are currently being implemented in the healthcare sector, and this presents designers with challenges involved in socially innovative design. In this paper, we argue that designing assistive technologies requires focus on multiple users and use practices. We see the design...... of assistive technologies as design of socio-material assemblies , which include an analysis of the products already used in relation to multiple users, their practices and wishes. In the article we focus on the challenges in the implementation of two types of robotic beds used for disability care...

New Nuclear Materials Including Non Metallic Fuel Elements. Vol. I. Proceedings of the Conference on New Nuclear Materials Technology, Including Non Metallic Fuel Elements

International Nuclear Information System (INIS)

1963-01-01

One of the major aims of the International Atomic Energy Agency in furthering the peaceful uses of atomic energy is to encourage the development of economical nuclear power. Certainly, one of the more obvious methods of producing economical nuclear power is the development of economical fuels that can be used at high temperatures for long periods of time, and which have sufficient strength and integrity to operate under these conditions without permitting the release of fission products. In addition it is desirable that after irradiation these new fuels be economically reprocessed to reduce further the cost of the fuel cycle. As nuclear power becomes more and more competitive with conventional power the interest in new and more efficient higher-temperature fuels naturally increases rapidly. For these reasons, the Agency organized a Conference on New Nuclear Materials Technology, Including Non-Metallic Fuel Elements, which was held from 1 to 5 July 1963 at the International Hotel, Prague, with the assistance and co-operation of the Government of the Czechoslovak Socialist Republic. A total of 151 scientists attended, from 23 countries and 4 international organizations. The participants heard and discussed more than 60 scientific papers

75 FR 66795 - TTM Technologies, Including On-Site Leased Workers From Kelly Services, Aerotek, and an On-Site...

Science.gov (United States)

2010-10-29

... follows: ``All workers TTM Technologies, including on-site leased workers from Kelly Services and Aerotek... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-64,993] TTM Technologies, Including On-Site Leased Workers From Kelly Services, Aerotek, and an On-Site Leased Worker From Orbotech...

Managing Technology Is Different.

Science.gov (United States)

Levinson, Eliot; Grohe, Barbara

2002-01-01

Discusses methods that school superintendents can use to manage technology issues in their schools beyond traditional delegation. Highlights include participation more than delegation to a technology coordinator; identifying the right problems; determining what to make and what to buy; and the need for continual technology funding. (LRW)

Enhancing Literacy Skills through Technology.

Science.gov (United States)

Sistek-Chandler, Cynthia

2003-01-01

Discusses how to use technology to enhance literacy skills. Highlights include defining literacy, including information literacy; research to support reading and writing instruction; literacy software; thinking skills; organizational strategies for writing and reading; how technology can individualize literacy instruction; and a new genre of…

Joining technology development summary, 189a OH024

International Nuclear Information System (INIS)

Edmonds, D.P.

1978-01-01

Joining technology is discussed for Breeder Reactor technology including welding development and mechanical properties of weldments for austenitic stainless steels, high-temperature structural design data for austenitic stainless steel weldments and advanced transition joints is discussed. Technology developed in this program is briefly reviewed

Information Technology Budgets and Costs: Do You Know What Your Information Technology Costs Each Year?

Science.gov (United States)

Dugan, Robert E.

2002-01-01

Discusses yearly information technology costs for academic libraries. Topics include transformation and modernization activities that affect prices and budgeting; a cost model for information technologies; life cycle costs, including initial costs and recurring costs; cost benchmarks; and examples of pressures concerning cost accountability. (LRW)

32 CFR 37.875 - Should my TIA include a provision concerning foreign access to technology?

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Should my TIA include a provision concerning... Related to Other Administrative Matters Intellectual Property § 37.875 Should my TIA include a provision... provision in the TIA that addresses foreign access to technology developed under the TIA. (b) The provision...

Discussion on runoff purification technology of highway bridge deck based on water quality safety

Science.gov (United States)

Tan, Sheng-guang; Liu, Xue-xin; Zou, Guo-ping; Xiong, Xin-zhu; Tao, Shuang-cheng

2018-06-01

Aiming at the actual problems existing, including a poor purification effect of highway bridge runoff collection and treatment system across sensitive water and necessary manual emergency operation, three kinds of technology, three pools system of bridge runoff purification, the integral pool of bridge runoff purification and ecological planting tank, are put forward by optimizing the structure of purification unit and system setting. At the same time, we come up with an emergency strategy for hazardous material leakage basing on automatic identification and remote control of traffic accidents. On the basis of combining these with the optimized pool structure, sensitive water safety can be guaranteed and water pollution, from directly discharging of bridge runoff, can be decreased. For making up for the shortages of green highway construction technology, the technique has important reference value.

Educational Technology: Integration?

Science.gov (United States)

Christensen, Dean L.; Tennyson, Robert D.

This paper presents a perspective of the current state of technology-assisted instruction integrating computer language, artificial intelligence (AI), and a review of cognitive science applied to instruction. The following topics are briefly discussed: (1) the language of instructional technology, i.e., programming languages, including authoring…

Annual meeting on nuclear technology '92. Technical session 'Nuclear energy discussion'

International Nuclear Information System (INIS)

1992-05-01

The report contains the six special papers red at the 1992 annual conference on nuclear engineering at Karlsruhe, all of which are individually retrievable from the database. They deal with the following subjects: historical development of the basic trends of technology criticism; communication problems in connection with the conveying of technical facts; psycho-sociological patterns of technology anxiety-mental infection or risk consciousness; field of tension between technology and journalism; handling of insecurities; ethical justifiability of nuclear energy use. (HSCH) [de

New Nuclear Materials Including Non Metallic Fuel Elements. Vol. II. Proceedings of the Conference on New Nuclear Materials Technology, Including Non Metallic Fuel Elements

International Nuclear Information System (INIS)

1963-01-01

One of the major aims of the International Atomic Energy Agency in furthering the peaceful uses of atomic energy is to encourage the development of economical nuclear power. Certainly, one of the more obvious methods of producing economical nuclear power is the development of economical fuels that can be used at high temperatures for long periods of time, and which have sufficient strength and integrity to operate under these conditions without permitting the release of fission products. In addition it is desirable that after irradiation these new fuels be economically reprocessed to reduce further the cost of the fuel cycle. As nuclear power becomes more and more competitive with conventional power the interest in new and more efficient higher-temperature fuels naturally increases rapidly. For these reasons, the Agency organized a Conference on New Nuclear Materials Technology, Including Non-Metallic Fuel Elements, which was held from 1 to 5 July 1963 at the International Hotel, Prague, with the assistance and co-operation of the Government of the Czechoslovak Socialist Republic. A total of 151 scientists attended, from 23 countries and 4 international organizations. The participants heard and discussed more than 60 scientific papers. The Agency wishes to thank the scientists who attended this Conference for their papers and for many spirited discussions that truly mark a successful meeting. The Agency wishes also to record its gratitude for the assistance and generous hospitality accorded the Conference, the participants and the Agency's staff by the Government of the Czechoslovak Socialist Republic and by the people of Prague. The scientific information contained in these Proceedings should help to quicken the pace of progress in the fabrication of new and m ore economical fuels, and it is hoped that these proceedings will be found useful to all workers in this and related fields

NAND flash memory technologies

CERN Document Server

Aritome, Seiichi

2016-01-01

This book discusses basic and advanced NAND flash memory technologies, including the principle of NAND flash, memory cell technologies, multi-bits cell technologies, scaling challenges of memory cell, reliability, and 3-dimensional cell as the future technology. Chapter 1 describes the background and early history of NAND flash. The basic device structures and operations are described in Chapter 2. Next, the author discusses the memory cell technologies focused on scaling in Chapter 3, and introduces the advanced operations for multi-level cells in Chapter 4. The physical limitations for scaling are examined in Chapter 5, and Chapter 6 describes the reliability of NAND flash memory. Chapter 7 examines 3-dimensional (3D) NAND flash memory cells and discusses the pros and cons in structure, process, operations, scalability, and performance. In Chapter 8, challenges of 3D NAND flash memory are dis ussed. Finally, in Chapter 9, the author summarizes and describes the prospect of technologies and market for the fu...

Technology Support for Discussion Based Learning: From Computer Supported Collaborative Learning to the Future of Massive Open Online Courses

Science.gov (United States)

Rosé, Carolyn Penstein; Ferschke, Oliver

2016-01-01

This article offers a vision for technology supported collaborative and discussion-based learning at scale. It begins with historical work in the area of tutorial dialogue systems. It traces the history of that area of the field of Artificial Intelligence in Education as it has made an impact on the field of Computer-Supported Collaborative…

NASA technology utilization program: The small business market

Science.gov (United States)

Vannoy, J. K.; Garcia-Otero, F.; Johnson, F. D.; Staskin, E.

1980-01-01

Technology transfer programs were studied to determine how they might be more useful to the small business community. The status, needs, and technology use patterns of small firms are reported. Small business problems and failures are considered. Innovation, capitalization, R and D, and market share problems are discussed. Pocket, captive, and new markets are summarized. Small manufacturers and technology acquisition are discussed, covering external and internal sources, and NASA technology. Small business and the technology utilization program are discussed, covering publications and industrial applications centers. Observations and recommendations include small business market development and contracting, and NASA management technology.

Discussion of superconducting and room-temperature high-intensity ion linacs

International Nuclear Information System (INIS)

Jameson, R.A.

1996-01-01

The point of view taken in this discussion is that the basic technology base exists in all essential respects for both superconducting or room-temperature rf linac accelerators and associated power and control systems, and thus a project can make a choice between these technologies on overall system considerations. These include performance, cost, availability, flexibility, and upgradability. Large high-intensity neutron source proposals involving light-ion rf linacs in three categories are reviewed in this context. The categories arc cw linacs to high (∼1 GeV) and low (∼40 MeV) output energy, and pulsed linacs to energy ∼1 GeV

77 FR 40638 - Syniverse Technologies, Inc., Including On-Site Leased Workers From Insight Global Stone Staffing...

Science.gov (United States)

2012-07-10

..., Inc., Including On-Site Leased Workers From Insight Global Stone Staffing, and Randstad Formerly Known..., Massachusetts, including on-site leased workers from Insight Global, Stone Staffing, Randstad formerly known as... Insight Global, Stone Staffing, Randstad, formerly known as Sapphire Technologies, were employed on-site...

Summaries of discussion groups and closeout

International Nuclear Information System (INIS)

1998-01-01

The Beam Instrumentation Workshop registrants selected the following topics for group discussions: Commercial technology and beam instrumentation, 4th generation light source instrumentation, feedback systems, beam loss monitors, calibration methods, high resolution and highly stable BPM methods, challenges in beam profiling. Summaries of these discussion sessions are listed in the article that follows

Discussion on Sustainable Water Technologies for Peri-Urban Areas of Mexico City: Balancing Urbanization and Environmental Conservation

Directory of Open Access Journals (Sweden)

Laura Essl

2012-09-01

Full Text Available Often centralized water supply, sanitation and solid waste services struggle to keep up with the rapid expansion of urban areas. The peri-urban areas are at the forefront of this expansion and it is here where decentralized technologies are increasingly being implemented. The introduction of decentralized technologies allows for the development of new opportunities that enable the recovery and reuse of resources in the form of water, nutrients and energy. This resource-oriented management of water, nutrients and energy requires a sustainable system aimed at low resource use and high recovery and reuse rates. Instead of investigating each sector separately, as has been traditionally done, this article proposes and discusses a concept that seeks to combine the in- and outflows of the different sectors, reusing water and other liberated resources where possible. This paper shows and demonstrates examples of different types of sustainable technologies that can be implemented in the peri-urban areas of Mexico City [rainwater harvesting, EcoSan and biofiltros (small constructed wetlands, and (vermi-composting]. An innovative participatory planning method, combining scenario development with a participatory planning workshop with key stakeholders, was applied and resulted in three concept scenarios. Specific technologies were then selected for each concept scenario that the technical feasibility and applicability was assessed. Following this, the resulting resource flows (nutrients, water and energy were determined and analyzed. The results show that decentralized technologies not only have the potential to deliver adequate water supply, sanitation and solid waste services in peri-urban areas and lessen environmental pollution, but also can recover significant amounts of resources thereby saving costs and providing valuable inputs in, for instance, the agricultural sector. Social acceptance of the technologies and institutional cooperation, however, is

Discussion on Sustainable Water Technologies for Peri-Urban Areas of Mexico City: Balancing Urbanization and Environmental Conservation

Directory of Open Access Journals (Sweden)

Tiemen A. Nanninga

2012-09-01

Full Text Available Often centralized water supply, sanitation and solid waste services struggle to keep up with the rapid expansion of urban areas. The peri-urban areas are at the forefront of this expansion and it is here where decentralized technologies are increasingly being implemented. The introduction of decentralized technologies allows for the development of new opportunities that enable the recovery and reuse of resources in the form of water, nutrients and energy. This resource-oriented management of water, nutrients and energy requires a sustainable system aimed at low resource use and high recovery and reuse rates. Instead of investigating each sector separately, as has been traditionally done, this article proposes and discusses a concept that seeks to combine the in- and outflows of the different sectors, reusing water and other liberated resources where possible. This paper shows and demonstrates examples of different types of sustainable technologies that can be implemented in the peri-urban areas of Mexico City [rainwater harvesting, EcoSan and biofiltros (small constructed wetlands, and (vermi-composting]. An innovative participatory planning method, combining scenario development with a participatory planning workshop with key stakeholders, was applied and resulted in three concept scenarios. Specific technologies were then selected for each concept scenario that the technical feasibility and applicability was assessed. Following this, the resulting resource flows (nutrients, water and energy were determined and analyzed. The results show that decentralized technologies not only have the potential to deliver adequate water supply, sanitation and solid waste services in peri-urban areas and lessen environmental pollution, but also can recover significant amounts of resources thereby saving costs and providing valuable inputs in, for instance, the agricultural sector. Social acceptance of the technologies and institutional cooperation

Enhanced technologies for unattended ground sensor systems

Science.gov (United States)

Hartup, David C.

2010-04-01

Progress in several technical areas is being leveraged to advantage in Unattended Ground Sensor (UGS) systems. This paper discusses advanced technologies that are appropriate for use in UGS systems. While some technologies provide evolutionary improvements, other technologies result in revolutionary performance advancements for UGS systems. Some specific technologies discussed include wireless cameras and viewers, commercial PDA-based system programmers and monitors, new materials and techniques for packaging improvements, low power cueing sensor radios, advanced long-haul terrestrial and SATCOM radios, and networked communications. Other technologies covered include advanced target detection algorithms, high pixel count cameras for license plate and facial recognition, small cameras that provide large stand-off distances, video transmissions of target activity instead of still images, sensor fusion algorithms, and control center hardware. The impact of each technology on the overall UGS system architecture is discussed, along with the advantages provided to UGS system users. Areas of analysis include required camera parameters as a function of stand-off distance for license plate and facial recognition applications, power consumption for wireless cameras and viewers, sensor fusion communication requirements, and requirements to practically implement video transmission through UGS systems. Examples of devices that have already been fielded using technology from several of these areas are given.

Scientific discussion | Unifying physics and technology in light of Maxwell's equations | Royal Society, London | 16-17 November

CERN Multimedia

2015-01-01

Discussion meeting organised by Professor Anatoly Zayats, Professor John Ellis and Professor Roy Pike.   16-17 November 2015 at The Royal Society 6-9 Carlton House Terrace, London Event details The unification of electric and magnetic fields about 150 years ago in what is now known as electromagnetic theory expressed in Maxwell's Equations has enabled virtually all modern electrical, electronic, radio and photonic technologies. What new scientific breakthroughs and applications will unification with the other fields provide? This meeting brings together high-energy, optical, quantum and solid-state physicists to discuss recent developments enabled by Maxwell's Equations and will try to predict future innovations. Attending this event This event is intended for researchers in relevant fields and is free to attend. There are a limited number of places and registration is essential. For more information, visit the Royal Society event website.

Discussion on the Technology and Method of Computer Network Security Management

Science.gov (United States)

Zhou, Jianlei

2017-09-01

With the rapid development of information technology, the application of computer network technology has penetrated all aspects of society, changed people's way of life work to a certain extent, brought great convenience to people. But computer network technology is not a panacea, it can promote the function of social development, but also can cause damage to the community and the country. Due to computer network’ openness, easiness of sharing and other characteristics, it had a very negative impact on the computer network security, especially the loopholes in the technical aspects can cause damage on the network information. Based on this, this paper will do a brief analysis on the computer network security management problems and security measures.

Harnessing Technology to Improve K-12 Education. Discussion Paper 2012-05

Science.gov (United States)

Chatterji, Aaron; Jones, Benjamin

2012-01-01

Technological progress has consistently driven remarkable advances in the U.S. economy, yet K-12 education sees little technological change compared to other sectors, even as U.S. K-12 students increasingly lag behind students in other nations. This proposal considers how we can take a signature American strength--innovation--and apply it to K-12…

Proceedings of the 3. nuclear science and technology conference

International Nuclear Information System (INIS)

1990-01-01

Non-power applications of nuclear technology in medicine, agriculture and industry are discussed. These applications include irradiation of food for desinfestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of the nuclear power industry are also discussed

Characterization and Metrology for ULSI Technology: 1998 International Conference. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Seiler, D.G. [NIST, Gaithersburg, MD 20899 (United States); Diebold, A.C. [SEMATECH, Austin, TX 78741 (United States); Bullis, W.M. [SEMI, Mountain View, CA 94043 (United States); Schaffner, T.J. [Texas Instruments, Dallas, TX 75221 (United States); McDonald, R. [Intel Corp., Santa Clara, CA 95050 (United States); Walters, E.J. [NIST, Gaithersburg, MD 20899 (United States)

1998-11-01

These proceedings represent papers presented at the 1998 International Conference on Characterization and Metrology for ULSI Technology (INIST) in March 1998. The Conference reviewed important semiconductor techniques that are crucial to continued advancements in the semiconductor industry. It brought together leaders, scientists, and engineers concerned with all aspects of the technology and characterization techniques for silicon research. The topics covered included front end processes consisting of modeling, materials, gate dielectrics, doping and wafer issues. Interconnects were discussed in detail including deposition technology. Lithography and patterning was also discussed. Finally, packaging/assembly of the integrated circuits and materials characterization including dopant profiling was discussed. The papers provide an effective portrayal of industry characterization needs and point out some of the problems that must be addressed by industry, academia, and government to continue the dramatic progress in semiconductor technology. There were 141 papers included in these proceedings, out of which 9 have been abstracted for the Energy,Science and Technology database.(AIP)

Developments in lubricant technology

CERN Document Server

Srivastava, S P

2014-01-01

Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

Vehicle Technology for Civil Aviation: The Seventies and Beyond

Science.gov (United States)

1972-01-01

The panel discussion on aviation technology for the seventies and beyond is reported. Topics discussed include: Government role in developing and applying new aeronautical technologies, noise and environmental problems, and congestion in the vicinity of major air terminals.

Technology in the Public Library: Results from the 1992 PLDS Survey of Technology.

Science.gov (United States)

Fidler, Linda M.; Johnson, Debra Wilcox

1994-01-01

Discusses and compares the incorporation of technology by larger public libraries in Canada and the United States. Technology mentioned includes online public access catalogs; remote and local online database searching; microcomputers and software for public use; and fax, voice mail, and Telecommunication Devices for the Deaf and Teletype writer…

Technology Transfer: Technocultures, Power and Communication--The Australian Experience.

Science.gov (United States)

More, Elizabeth; Irwin, Harry

1995-01-01

Discusses issues of communication and power in the organizational dimensions of international technology transfer, including technoculture differences and strategic political alliances. Theoretical discussion is supplemented by analysis of international technology transfer activities involving Australian participation in the aerospace and…

TECHNOLOGICAL SCENARIOS TO THE DEMAND FOR SUGARCANE

Directory of Open Access Journals (Sweden)

Ana Paula Franco Paes Leme Barbosa

2012-06-01

Full Text Available From the first decade of the 2000s, it is clear that there is an increase in discussions involving sustainability, including the bioenergy issue, to which Brazil has drawn the attention due to advances in the ethanol industry. Advances in engine technology reflected new opportunities for this industry and, according to the Ten-Year Energy Plan for 2019 developed by the Ministry of Mines and Energy, there is an expected increase in demand for ethanol of 90% by 2019 (Brazil, 2010. However, new technologies for the conversion and use of sugarcane and the complex context of this industry add uncertainties to this sector. Aiming to discuss and include the uncertainties on the agenda of this industry, this study proposes to elaborate and discuss prospective scenarios to the demand for sugarcane. Four scenarios with different perspectives of technological advance and market development were elaborated and discussed in the conclusion.

Elements of plasma technology

CERN Document Server

Wong, Chiow San

2016-01-01

This book presents some fundamental aspects of plasma technology that are important for beginners interested to start research in the area of plasma technology . These include the properties of plasma, methods of plasma generation and basic plasma diagnostic techniques. It also discusses several low cost plasma devices, including pulsed plasma sources such as plasma focus, pulsed capillary discharge, vacuum spark and exploding wire; as well as low temperature plasmas such as glow discharge and dielectric barrier discharge which the authors believe may have potential applications in industry. The treatments are experimental rather than theoretical, although some theoretical background is provided where appropriate. The principles of operation of these devices are also reviewed and discussed.

Information technology made simple

CERN Document Server

Carter, Roger

1991-01-01

Information Technology: Made Simple covers the full range of information technology topics, including more traditional subjects such as programming languages, data processing, and systems analysis. The book discusses information revolution, including topics about microchips, information processing operations, analog and digital systems, information processing system, and systems analysis. The text also describes computers, computer hardware, microprocessors, and microcomputers. The peripheral devices connected to the central processing unit; the main types of system software; application soft

Discussion on construction of scientific and technological digital library in nuclear industry

International Nuclear Information System (INIS)

Yin Huilan

2010-01-01

With the rapid development of digital and network technology, traditional libraries have been unable to meet the needs of the times. Digital libraries will gradually take the place of traditional libraries. Under the circumstances, how will the libraries of the enterprises in nuclear industry face this transformation? This paper gives the brief descriptions and comparative analyses in the four aspects: the definition of the digital library, the meaning of nuclear scientific and technological digital library, the characteristics of the digital library, and major problems in the construction of nuclear scientific and technological digital library that should be solved. Therefore, setting up the digital library is very important. At the same time, it's very necessary and urgent for the libraries of the enterprises in nuclear industry to establish nuclear scientific and technological digital library. (author)

Validity of Business Strategy as Driver in Technology Management – A Critical Discussion

DEFF Research Database (Denmark)

Tambo, Torben; Østergaard, Klaus

2015-01-01

in connecting technological design tightly to the business strategy. The purpose of this paper is to advance a research agenda, where long-term orientation of technology is connected to the necessary tools for obtaining insight in assessing adequacy, reliability and quality of business strategy and evaluation......Frameworks for technological development are increasingly requiring that technology must be developed in accordance with the corporate business strategy. It is an interesting tendency that technological development should reflect and interact with central change processes of the enterprise...... of alternatives. Alternatives are related to business environments, compliance, infrastructure, knowledge, skills and societal factors....

Nuclear safeguards technology handbook

International Nuclear Information System (INIS)

1977-12-01

The purpose of this handbook is to present to United States industrial organizations the Department of Energy's (DOE) Safeguards Technology Program. The roles and missions for safeguards in the U.S. government and application of the DOE technology program to industry safeguards planning are discussed. A guide to sources and products is included

LGBT Roundtable Discussion: Meet-up and Mentoring Discussion

Science.gov (United States)

2014-03-01

The LGBT+ Physicists group welcomes those who identify as gender sexual minorities, as LGBTQQIAAP+, or as allies to participate in a round-table discussion on mentoring physicists. The session will provide an opportunity to learn and discuss successful mentoring strategies at different career stages for physicists in all environments, including academia, industry, etc. Attendees are encouraged to attend a social event to follow the panel to continue to network. Allies are especially welcome at this event to learn how to support and mentor LGBT+ physicists.

Technology: Trigger for Change in Reference Librarianship.

Science.gov (United States)

Hallman, Clark N.

1990-01-01

Discussion of the influence of technological developments on social change focuses on the effects of information technology on academic reference librarianship. Highlights include reference skills; electronic resources; microcomputer technology; online catalogs; interaction and communication with users; the need to teach information skills; and…

Threshold evaluations of industrial conservation technologies run in ISTUM base case

Energy Technology Data Exchange (ETDEWEB)

1978-12-20

The results of threshold evaluations performed on several INDUS technologies which were competed with other new and conventional industrial technologies in the Industrial Sector Technology Use Model (ISTUM) developed by EEA are summarized. The ISTUM model is briefly described and includes the input technology categories and service sectors treated in the model, and the solution technique used. The input data specifications are summaried for the Industry Conservation Technologies run in the ISTUM base case. Included are listings of the technologies run in ISTUM, those not run in ISTUM, and a discussion of the absence of a retrofit algorithm in ISTUM and its resulting impact on conservation technologies. Also included is a discussion of the capital cost variability, maximum market fraction, size and load factors and data quality specifications for the conservation technologies in ISTUM. The results of the ISTUM base case run are presented, describing the important limitations and constraints of the base case run, the key assumptions inherent in the base case, and the summarized results of energy savings by year for different generic technology types. The technology characterization data developed for each INDUS technology run in the ISTUM base case are discussed in detail. The descriptions include the calculations and assumptions used in determining the service demand displacement, equipment cost, maximum market fraction, data quality, and size and load range for each technology.

78 FR 8587 - Thomson Reuters, Finance Operations & Technology Division, Including On-Site Leased Workers From...

Science.gov (United States)

2013-02-06

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-81,755] Thomson Reuters, Finance Operations & Technology Division, Including On-Site Leased Workers From Adecco; Eagan, MN; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of the Trade Act of 1974, as amended (`...

Information Technology and the Third Industrial Revolution.

Science.gov (United States)

Fitzsimmons, Joe

1994-01-01

Discusses the so-called third industrial revolution, or the information revolution. Topics addressed include the progression of the revolution in the U.S. economy, in Europe, and in Third World countries; the empowering technologies, including digital switches, optical fiber, semiconductors, CD-ROM, networks, and combining technologies; and future…

Technology-based suicide prevention: current applications and future directions.

Science.gov (United States)

Luxton, David D; June, Jennifer D; Kinn, Julie T

2011-01-01

This review reports on current and emerging technologies for suicide prevention. Technology-based programs discussed include interactive educational and social networking Web sites, e-mail outreach, and programs that use mobile devices and texting. We describe innovative applications such as virtual worlds, gaming, and text analysis that are currently being developed and applied to suicide prevention and outreach programs. We also discuss the benefits and limitations of technology-based applications and discuss future directions for their use.

Exploration Technology Development including Surface Acoustic Wave RFID chips

Data.gov (United States)

National Aeronautics and Space Administration — This project is focused on maturing future surface exploration technologies and instrumentation and working towards flight instrumentation and systems to support...

Nuclear safeguards technology handbook

Energy Technology Data Exchange (ETDEWEB)

1977-12-01

The purpose of this handbook is to present to United States industrial organizations the Department of Energy's (DOE) Safeguards Technology Program. The roles and missions for safeguards in the U.S. government and application of the DOE technology program to industry safeguards planning are discussed. A guide to sources and products is included. (LK)

Slurry pipeline technology: an overview

Energy Technology Data Exchange (ETDEWEB)

Chapman, Jay P. [Pipeline Systems Incorporated (PSI), Belo Horizonte, MG (Brazil); Lima, Rafael; Pinto, Daniel; Vidal, Alisson [Ausenco do Brasil Engenharia Ltda., Nova Lima, MG (Brazil). PSI Div.

2009-12-19

Slurry pipelines represent an economical and environmentally friendly transportation means for many solid materials. This paper provides an over-view of the technology, its evolution and current Brazilian activity. Mineral resources are increasingly moving farther away from ports, processing plants and end use points, and slurry pipelines are an important mode of solids transport. Application guidelines are discussed. State-of-the-Art technical solutions such as pipeline system simulation, pipe materials, pumps, valves, automation, telecommunications, and construction techniques that have made the technology successful are presented. A discussion of where long distant slurry pipelines fit in a picture that also includes thickened and paste materials pipe lining is included. (author)

Technologies for Legionella Control

Science.gov (United States)

Presentation includes a review of new Office of Water document entitled "Technologies for Legionella Control in Premise Plumbing Systems", and discussion on ORD research projects involving Legionella and disinfection.

New technology for food systems and security.

Science.gov (United States)

Yau, N J Newton

2009-01-01

In addition to product trade, technology trade has become one of the alternatives for globalization action around the world. Although not all technologies employed on the technology trade platform are innovative technologies, the data base of international technology trade still is a good indicator for observing innovative technologies around world. The technology trade data base from Sinew Consulting Group (SCG) Ltd. was employed as an example to lead the discussion on security or safety issues that may be caused by these innovative technologies. More technologies related to processing, functional ingredients and quality control technology of food were found in the data base of international technology trade platform. The review was conducted by categorizing technologies into the following subcategories in terms of safety and security issues: (1) agricultural materials/ingredients, (2) processing/engineering, (3) additives, (4) packaging/logistics, (5) functional ingredients, (6) miscellaneous (include detection technology). The author discusses examples listed for each subcategory, including GMO technology, nanotechnology, Chinese medicine based functional ingredients, as well as several innovative technologies. Currently, generation of innovative technology advance at a greater pace due to cross-area research and development activities. At the same time, more attention needs to be placed on the employment of these innovative technologies.

Learning with Technology: Using Discussion Forums to Augment a Traditional-Style Class

Science.gov (United States)

Shana, Zuhrieh

2009-01-01

There is considerable evidence that using technology as an instructional tool improves student learning and educational outcomes (Hanna & de Nooy, 2003). In developing countries, pre-university education focuses on memorization, although meting the mission of AUST requires students to manage technology and to think more independently. This…

In the Presence of Technology

DEFF Research Database (Denmark)

Nortvig, Anne-Mette

2013-01-01

Abstract: In a hybrid synchronous classroom that includes both on line and on campus students, technology plays a big part in the teaching. This paper attempts to analyse and discuss how the transparency of technology affects opportunities for the students to interact and for the teacher to be pr...

Fossil energy waste management. Technology status report

Energy Technology Data Exchange (ETDEWEB)

Bossart, S.J.; Newman, D.A.

1995-02-01

This report describes the current status and recent accomplishments of the Fossil Energy Waste Management (FE WM) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Waste Management Program is to identify and develop optimal strategies to manage solid by-products from advanced coal technologies for the purpose of ensuring the competitiveness of advanced coal technologies as a future energy source. The projects in the Fossil Energy Waste Management Program are divided into three types of activities: Waste Characterization, Disposal Technologies, and Utilization Technologies. This technology status report includes a discussion on barriers to increased use of coal by-products. Also, the major technical and nontechnical challenges currently being addressed by the FE WM program are discussed. A bibliography of 96 citations and a list of project contacts is included if the reader is interested in obtaining additional information about the FE WM program.

Wafer level 3-D ICs process technology

CERN Document Server

Tan, Chuan Seng; Reif, L Rafael

2009-01-01

This book focuses on foundry-based process technology that enables the fabrication of 3-D ICs. The core of the book discusses the technology platform for pre-packaging wafer lever 3-D ICs. However, this book does not include a detailed discussion of 3-D ICs design and 3-D packaging. This is an edited book based on chapters contributed by various experts in the field of wafer-level 3-D ICs process technology. They are from academia, research labs and industry.

Supporting Teacher Reflection through Online Discussion

Directory of Open Access Journals (Sweden)

Jiening Ruan

2011-12-01

Full Text Available The purpose of this case study was to investigate online discussion as a means to promote critical reflection. The study was conducted during a semester-long graduate course on issues related to literacy instructional strategies. The participants in the study were four reading education candidates. During the semester they participated in online discussion about course readings and reflected on their own teaching experiences. The data sources were the online discussion postings, responses to questionnaires, and interviews. The results suggest that technology-mediated discussion strengthens the learning community, facilitates sharing of professional experience among participants, and enhances teacher reflection. The results also point to the multi-faceted nature of teacher reflection.

Technology innovation and management in the US Bureau of the Census: Discussion and recommendations

Energy Technology Data Exchange (ETDEWEB)

Tonn, B.; Edwards, R.; Goeltz, R.; Hake, K.

1990-09-01

This report contains a set of recommendations prepared by Oak Ridge National Laboratory (ORNL) for the US Bureau of the Census pertaining to technology innovation and management. Technology has the potential to benefit the Bureau's data collection, capture, processing, and analysis activities. The entire Bureau was represented from Decennial Census to Economic Programs and various levels of Bureau management and numerous experts in technology. Throughout the Bureau, workstations, minicomputers, and microcomputers have found their place along side the Bureau's mainframes. The Bureau's new computer file structure called the Topologically Integrated Geographic Encoding and Referencing data base (TIGER) represents a major innovation in geographic information systems and impressive progress has been made with Computer Assisted Telephone Interviewing (CATI). Other innovations, such as SPRING, which aims to provide Bureau demographic analysts with the capability of interactive data analysis on minicomputers, are in the initial stages of development. Recommendations fall into five independent, but mutually beneficial categories. (1) The ADP Steering Committee be disbanded and replaced with The Technology Forum. (2) Establishment of a Technology Review Committee (TRC), to be composed of technology experts from outside the Bureau. (3) Designate technological gurus. These individuals will be the Bureau's experts in new and innovative technologies. (4) Adopt a technology innovation process. (5) Establish an Advanced Technology Studies Staff (ATSS) to promote technology transfer, obtain funding for technological innovation, manage innovation projects unable to find a home in other divisions, evaluate innovations that cut across Bureau organizational boundaries, and provide input into Bureau technology analyses. (JF)

Workshop on compact storage ring technology: applications to lithography

International Nuclear Information System (INIS)

1986-01-01

Project planning in the area of x-ray lithography is discussed. Three technologies that are emphasized are the light source, the lithographic technology, and masking technology. The needs of the semiconductor industry in the lithography area during the next decade are discussed, particularly as regards large scale production of high density dynamic random access memory devices. Storage ring parameters and an overall exposure tool for x-ray lithography are addressed. Competition in this area of technology from Germany and Japan is discussed briefly. The design of a storage ring is considered, including lattice design, magnets, and beam injection systems

Focus group discussions

CERN Document Server

Hennink, Monique M

2014-01-01

The Understanding Research series focuses on the process of writing up social research. The series is broken down into three categories: Understanding Statistics, Understanding Measurement, and Understanding Qualitative Research. The books provide researchers with guides to understanding, writing, and evaluating social research. Each volume demonstrates how research should be represented, including how to write up the methodology as well as the research findings. Each volume also reviews how to appropriately evaluate published research. Focus Group Discussions addresses the challenges associated with conducting and writing focus group research. It provides detailed guidance on the practical and theoretical considerations in conducting focus group discussions including: designing the discussion guide, recruiting participants, training a field team, moderating techniques and ethical considerations. Monique Hennink describes how a methodology section is read and evaluated by others, such as journal reviewers or ...

Discussion on Application of Space Materials and Technological Innovation in Dynamic Fashion Show

Science.gov (United States)

Huo, Meilin; Kim, Chul Soo; Zhao, Wenhan

2018-03-01

In modern dynamic fashion show, designers often use the latest ideas and technology, and spend their energy in stage effect and overall environment to make audience’s watching a fashion show like an audio-visual feast. With rapid development of China’s science and technology, it has become a design trend to strengthen the relationship between new ideas, new trends and technology in modern art. With emergence of new technology, new methods and new materials, designers for dynamic fashion show stage art can choose the materials with an increasingly large scope. Generation of new technology has also made designers constantly innovate the stage space design means, and made the stage space design innovated constantly on the original basis of experiences. The dynamic clothing display space is on design of clothing display space, layout, platform decoration style, platform models, performing colors, light arrangement, platform background, etc.

Develop, Discuss, and Decide: How New Science Teachers Use Technologies to Advance Their Practice

Science.gov (United States)

Ellis, Joshua Alexander

For decades, there has been a nationwide demand to increase the number of science teachers in K-12 education (National Commission on Excellence in Education, 1983; National Research Council [NRC], 2007). This demand is in large part due to increases in state science graduation requirements. Teacher preparation programs have been preparing new science teachers on pace with the resulting increase in demand (Ingersoll & Merrill, 2010), however, shortages have continued as up to 50% of these new teachers leave the profession within their first five years of teaching (Smith & Ingersoll, 2004), creating a "revolving door" phenomenon as districts scramble to address this early attrition with yet more beginning teachers. We need to address what Ingersoll (2012) describes as the "greening" of the teaching force: the fact that an increasingly large segment of the teaching force is comprised of beginning teachers who are at a high risk of leaving the profession. The three related studies that comprise this dissertation focus on the role of technological interventions for in-service and pre-service science teachers. The context for the first two studies is TIN, an online induction program for beginning secondary science teachers. These two studies consider the impact of technological supports on the reflective practice of participating teachers. The design interventions included VideoANT (an online video annotation tool) and Teachers as Leaders roles (a structured response protocol) for the Venture/Vexation online forum activity. The context for the third study is T3-S, a university licensure course for pre-service science teachers designed to explore technology integration in secondary science classrooms. This study investigated the impact of pre-service teacher participation in the creation of an Adventure Learning (AL) environment (Doering, 2006) on their understanding of technological, pedagogical, and content knowledge (TPACK) and its role in their future science

Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

Energy Technology Data Exchange (ETDEWEB)

Moore, E.B.

1984-10-01

The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables.

Control technology for radioactive emissions to the atmosphere at US Department of Energy facilities

International Nuclear Information System (INIS)

Moore, E.B.

1984-10-01

The purpose of this report is to provide information to the US Environmental Protection agency (EPA) on existing technology for the control of radionuclide emissions into the air from US Department of Energy (DOE) facilities, and to provide EPA with information on possible additional control technologies that could be used to further reduce these emissions. Included in this report are generic discussions of emission control technologies for particulates, iodine, rare gases, and tritium. Also included are specific discussions of existing emission control technologies at 25 DOE facilities. Potential additional emission control technologies are discussed for 14 of these facilities. The facilities discussed were selected by EPA on the basis of preliminary radiation pathway analyses. 170 references, 131 figures, 104 tables

Developing human technology curriculum

Directory of Open Access Journals (Sweden)

Teija Vainio

2012-10-01

Full Text Available During the past ten years expertise in human-computer interaction has shifted from humans interacting with desktop computers to individual human beings or groups of human beings interacting with embedded or mobile technology. Thus, humans are not only interacting with computers but with technology. Obviously, this shift should be reflected in how we educate human-technology interaction (HTI experts today and in the future. We tackle this educational challenge first by analysing current Master’s-level education in collaboration with two universities and second, discussing postgraduate education in the international context. As a result, we identified core studies that should be included in the HTI curriculum. Furthermore, we discuss some practical challenges and new directions for international HTI education.

Sodium technology handbook

International Nuclear Information System (INIS)

2005-09-01

This document was published as a textbook for the education and training of personnel working for operations and maintenances of sodium facilities including FBR plants and those engaged in R and D activities related to sodium technology. This handbook covers the following technical areas. Properties of sodium. Compatibilities of sodium with materials. Thermalhydraulics and structural integrity. Sodium systems and components. Sodium instrumentations. Sodium handling technology. Sodium related accident evaluation and countermeasures for FBRs. Operation, maintenance and repair technology of sodium facilities. Safety measures related to sodium. Laws, regulations and internal rules related to sodium. The plannings and discussions of the handbook were made in the Sodium Technology Education Committee organized in O-arai Engineering Center consisting of the representatives of the related departments including Tsuruga headquarters. Experts in various departments participated in writing individual technical subjects. (author)

The Discussions around Precision Genetic Engineering: Role of and Impact on Disabled People

Directory of Open Access Journals (Sweden)

Gregor Wolbring

2016-09-01

Full Text Available Genetic researchers are advancing in their abilities to extract precise genetic information from biological and human entities bringing genetic research steps closer to accurately modifying genes of biological entities, including that of humans. In this analytical essay, we focus on the discussions about precision genetic intervention that have taken place since March 2015 as they pertain to disabled people. We focus on two areas; one being the role of disabled people in the recent gene editing discussions and the second being the utility of existing legal instruments. Within our first focus we address the following questions: (a What is the visibility of disabled people in the gene-editing discussions that have taken place since March 2015? (b What has been the impact of those discussions on disabled people? (c Were social problems which disabled people face taken into account in those discussions; (d How does the reality of engagement with disabled people in these discussions fit with science, technology and innovation governance discourses that ask for more stakeholder, bottom up and anticipatory involvement? Within our second focus we address the following questions: (a What is the utility of the United Nations Convention on the Right of Persons with Disabilities (UNCRPD; and (b What is the utility of existing legal instruments covering genetic interventions: for preventing negative social consequences of genetic engineering developments for disabled people. We argue that (a the genetic engineering debates since March 2015 have portrayed disabled people dominantly through a medical lens; (b that the governance of science, technology and innovation of genetic engineering including anticipatory governance and responsible innovation discourses has not yet engaged with the social impact of gene editing on disabled people; (c that few scholars that focus on the social situation of disabled people are visible in the governance discussions of gene

High-efficiency photovoltaic technology including thermoelectric generation

Science.gov (United States)

Fisac, Miguel; Villasevil, Francesc X.; López, Antonio M.

2014-04-01

Nowadays, photovoltaic solar energy is a clean and reliable source for producing electric power. Most photovoltaic systems have been designed and built up for use in applications with low power requirements. The efficiency of solar cells is quite low, obtaining best results in monocrystalline silicon structures, with an efficiency of about 18%. When temperature rises, photovoltaic cell efficiency decreases, given that the short-circuit current is slightly increased, and the open-circuit voltage, fill factor and power output are reduced. To ensure that this does not affect performance, this paper describes how to interconnect photovoltaic and thermoelectric technology into a single structure. The temperature gradient in the solar panel is used to supply thermoelectric cells, which generate electricity, achieving a positive contribution to the total balance of the complete system.

Health, development and innovation: a contribution of the critical theory of technology to the discussion.

Science.gov (United States)

Souza, Luis Eugenio Portela Fernandes de

2016-11-03

The relationships between health and socioeconomic development are diverse. These relationships find in the health economic complex a privileged ground for expression. The importance of health technologies increased exponentially since the middle of the 20th century, affecting health systems in terms of both, quality of care and economic aspects. In fact, the predominant model of care is based on fragmented, symptomatic therapy practices that encourages the use of products and services and promotes a passive participation of users rather than humanization of care. Overcoming this model requires changes in the health technology standards which, in turn, require changes in the technology standard of society. The critical theory of technology helps to understand the evolution of the industrial civilization. It enriches the discussion by suggesting the health economic complex be more sensibly adjusted to the requirements of comprehensive health care, and to inclusive and sustainable development. Resumo: As relações entre a saúde e o desenvolvimento socioeconômico são múltiplas. Essas relações têm o complexo econômico da saúde como o espaço privilegiado de sua expressão. A importância das tecnologias de saúde aumentou exponencialmente desde meados do século XX, com efeitos sobre os sistemas de saúde, tanto em qualidade da atenção, quanto em aspectos econômicos. Na realidade, predomina um modelo de atenção caracterizado por práticas fragmentadas, que enfatizam tratamentos sintomáticos, estimulam o consumismo de produtos e serviços e promovem, ao invés da humanização, uma participação passiva dos usuários. A superação desse modelo passa pela mudança do padrão tecnológico da saúde, que, por sua vez, exige a transformação do padrão tecnológico da sociedade. A teoria crítica da tecnologia ajuda a compreender a evolução da civilização industrial. Enriquece o debate, sugerindo uma conformação do complexo econômico da saúde mais

Streaming Media Technology: Laying the Foundations for Educational Change.

Science.gov (United States)

Sircar, Jayanta

2000-01-01

Discussion of the delivery of multimedia using streaming technology focuses on its use in engineering education. Highlights include engineering education and instructional technology, including learning approaches based on cognitive development; differences between local and distance education; economic factors; and roles of Web-based streaming,…

Structures and Technology Encouraging Discussion in Human Sexuality Courses: Strategies to Engage a Range of Students

Science.gov (United States)

Angera, Jeffrey J.; Latty, Christopher R.

2015-01-01

Human sexuality courses are common across many college/university campuses. The methods of instruction typically encourage discussion to increase knowledge and critical thinking about self, relationships, and professional pathways. However, often the pedagogical practices do not include methods to draw out students with a range of personalities,…

Technology transfer in CANDU marketing

International Nuclear Information System (INIS)

Pon, G.A.

1982-06-01

The author discusses how the CANDU system lends itself to technology transfer, the scope of CANDU technology transfer, and the benefits and problems associated with technology transfer. The establishment of joint ventures between supplier and client nations offers benefits to both parties. Canada can offer varying technology transfer packages, each tailored to a client nation's needs and capabilities. Such a package could include all the hardware and software necessary to develop a self-sufficient nuclear infrastructure in the client nation

Safety philiosophies in technology-related law discussed for the example of atomic energy law

International Nuclear Information System (INIS)

Rossnagel, A.

1993-01-01

In practice, legal ruling and its technical implementation stand isolated side by side. Taking the example of atomic energy law, the reasons for this situation and the significance of the deficit in the legal control of technology are examined. It is discussed how the controlling capacity of the law can be increased through the legal implementation of safety philosophies for technology. The paper deals with the problematic realtionship between technical and legal norms, with safety philosophies in the sense of mental approaches, safety concepts or safety postulates and their legal significance, and with the safety philosophy adhered to by the authorities and courts. The following learning processes in safety philosophy are described: new concepts of protection within the field of determinism, probabilistic safety concepts as well as concepts for the reduction of damage potential. Altogether it can be stated that the safety philosophy currently adhered to in Federal German licensing practice is not the only possible one; rather, that there are many different ways of conceptualizing, stipulating and checking technical safety. At least in the field of atomic energy law, this insight has a twofold significance: de lege lata there are several ways of operationalizing the licence requirements laid down in Article 7 of the Atomic Energy Law and the legally defined requirements for a licence withdrawal with the aid of technical licensing criteria. In all cases the legal wording is indeterminate and does not prescribe any specific safety philosophy. De lege ferenda it must be noted that amendments to the Atomic Energy Law entail a regularization of safety philosophy. This is a political necessity if the Atomic Energy Law is to be developed further and thus maintained as a modern security law. (orig.) [de

A quantitative discussion on the assessment of power supply technologies: DEA (data envelopment analysis) and SAW (simple additive weighting) as complementary methods for the “Grammar”

International Nuclear Information System (INIS)

Shakouri, Hamed G.; Nabaee, Mahdis; Aliakbarisani, Sajad

2014-01-01

The growing concern about the negative effects of fossil fuels on the environment, and the limited resources of them have forced more intensive use of other energy sources. In absence of sufficient economically feasible renewable energies, nuclear power may play essential role in this field. Recently, the advantages and disadvantages of nuclear power and fossil fuels regarding their efficiencies have been attracted researchers' interest. This paper discusses on the findings from “A Grammar for assessing the performance of power supply systems: comparing nuclear energy to fossil energy” (Diaz-Maurin F, Giampietro M. 2013). Although the “Grammar” is a very valuable approach, it can be accomplished by using helpful quantitative methods. In this discussion, we apply quantitative decision-making approaches to compare the same fossil fuel (coal) power plants with nuclear power plants. Economic variables are also taken into consideration. The DEA (data envelopment analysis) and SAW (simple additive weighting) are the methods applied. Results confirm the results of the reference paper in most cases and show that the fossil fuel power plants with CCS (carbon capture and storage) are slightly more efficient than nuclear power plants. However, selection of input and output variables is disputable. Assuming job creation as a desired output can change the ranking results. - Highlights: • A numeric decision making approach is proposed to facilitate assessment of technologies introduced as a “Grammar”. • Two different methods are chosen (SAW and DEA) since the results obtained for ranking may differ with different methods. • We propose to use the original fractional objective function of DEA with equal weightings applied for the attributes. • Proper combinations of both input and output attributes including economic variables are discussed. • The attributes for assessment of the technologies differ from different viewpoints. Labor force and costs are simple

Discuss the impact technological advances in equipment and materials have made on the delivery and outcome of endodontic treatment.

Science.gov (United States)

Lababidi, Emad Aldin

2013-12-01

Recent advances in endodontic equipment and materials have considerably changed the manner in which endodontic treatment is delivered. Specific technological advances, including nickel-titanium instruments, ultrasonic instruments and the dental operating microscope have been associated with increased efficiency and efficacy of treatment and simplification of delivery. The effects of most of these changes have been tested via in vitro studies and case reports. Ongoing studies should constantly investigate what effects technological advances might have on the outcome of endodontic treatment. © 2013 Australian Society of Endodontology.

Mobile Networking Technology Within INSC

National Research Council Canada - National Science Library

Macker, Joseph P

2003-01-01

We provide an overview of the INSC Mobility Task area efforts including: a brief overview of technology areas investigated, a discussion of research developments, and example results from experimentation and demonstration...

Discussion on the Influence of Various Technological Parameters on Jet Grouting Columns Geometry

Directory of Open Access Journals (Sweden)

Bzówka Joanna

2015-06-01

Full Text Available One of the most popular elements created by using jet grouting technology are columns. During designing such columns, it is a problem of estimating their shape and dimensions. The main factors that influence on columns geometry are soil characteristic and technological parameters. At the frame of Authors scientific research, following technological factors were taken into account: system of jet grouting, injection pressure, dimension of nozzles and rotation speed during injection. In the paper some results of the field tests of jet grouting columns are presented

Designing Human Technologies

DEFF Research Database (Denmark)

Simonsen, Jesper

and the design process, in ethical and society-related concerns, and in evaluating how designs fulfill needs and solve problems. Designing Human Technologies subscribes to a broad technology concept including information and communication, mobile, environmental/sustainable and energy technologies......Design is increasingly becoming a part of the university curriculum and research agenda. The keynote present and discuss Designing Human Technologies – an initiative aiming at establishing a design oriented main subject area alongside traditional main subject areas such as Natural Science......, the Humanities, and Social Science. The initiative broadens the perspective of IS and recognize reflections on aesthetics, ethics, values, connections to politics, and strategies for enabling a better future as legitimate parts of the research agenda. Designing Human Technologies is a design-oriented Strategic...

Strategies for replacement of obsolete equipment - including reverse engineering

International Nuclear Information System (INIS)

Irish, C.S.

2000-01-01

The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of: commercially available equivalent component; modification of a commercial available component; reverse engineering of the original component; and finally, design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: Missing, misleading or no information on the original component; Acquiring information from the original equipment manufacturer and the plant; Using a sample component for the replacement evaluation and or reverse engineering; and Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

Voicing on Virtual and Face to Face Discussion

Science.gov (United States)

Yamat, Hamidah

2013-01-01

This paper presents and discusses findings of a study conducted on pre-service teachers' experiences in virtual and face to face discussions. Technology has brought learning nowadays beyond the classroom context or time zone. The learning context and process no longer rely solely on face to face communications in the presence of a teacher.…

Artificial Intelligence Applications to High-Technology Training.

Science.gov (United States)

Dede, Christopher

1987-01-01

Discusses the use of artificial intelligence to improve occupational instruction in complex subjects with high performance goals, such as those required for high-technology jobs. Highlights include intelligent computer assisted instruction, examples in space technology training, intelligent simulation environments, and the need for adult training…

Facilitating Administrators' Instructional Leadership through the Use of a Technology Integration Discussion Protocol

Science.gov (United States)

McLeod, Scott

2015-01-01

Digital learning tools are increasingly prevalent in classrooms, yet too often technology integration efforts by educators replicate rather than transform traditional instructional practices. Opportunities to take advantage of the new affordances that technologies bring to the learning environment thus become forfeit. Administrators' use of a…

Milk Technological Properties as Affected by Including Artichoke By-Products Silages in the Diet of Dairy Goats

Directory of Open Access Journals (Sweden)

Raquel Muelas

2017-12-01

Full Text Available Traditional farming practices include the use of local agricultural by-products in the diet of ruminants. Artichoke harvesting and transformation yield high amounts of by-products that, if properly used, may reduce farming costs and the environmental impact of farming. The present study tests the inclusion of silages from artichoke by-products (plant and outer bracts in the diet of dairy goats (0%, 12.5% and 25% inclusion on the technological and sensory properties of milk during a five-month study. Milk composition, color, stability, coagulation and fermentation properties remained unaffected by diet changes. Panelists were not able to differentiate among yogurts obtained from those milks by discriminant triangular sensory tests. Silages of artichoke by-products can be included in isoproteic and isoenergetic diets for dairy goats, up to a 25% (feed dry matter, without negatively affecting milk technological and sensory properties whereas reducing feeding costs.

Technology innovation in an integrated energy economy

International Nuclear Information System (INIS)

Isaacs, E.

2006-01-01

A discussion on technology innovation in an integrated energy economy was presented. The mission, mandate and strategy of the Alberta Research Institute was first presented, followed by a discussion on oil supply needs based on historic demand. The presentation then addressed what might happen as oil demand and supply peak. A comparison of conventional versus unconventional resources was included along with a chart illustrating Alberta's contribution to total global reserves. Other topics addressed in the presentation in chart format included: natural gas requirements and natural gas use in oil sands; marketable gas production and the number of producing gas wells; Alberta's natural gas situation; and net United States imports of natural gas. Options for reducing natural gas consumption in oil sand production processes were also identified. These included steam assisted gravity drainage; solvent processes, electrical heating, combustion, nuclear, geothermal, and gasification processes. Advantages and disadvantages of replacing natural gas through gasification were presented. Last, the presentation provided an unconventional gas technology roadmap and discussed an innovative energy technology program. It was concluded that there are no clear cut options for replacing the huge amount of natural gas needed in the expanding oil sands sector. tabs., figs

Let nuclear technology create new brilliancy for china's sustainable development

International Nuclear Information System (INIS)

Du Xiangwan

2008-01-01

This paper summarizes the development and application directions of nuclear technology, including five aspects: nuclear technology and energy nuclear technology and medicine, nuclear anclear analysis technology, nuclear radiation technology, astronautics and voyage's nuclear power, etc. The paper discusses the importance of them to sustainable development and generalizes the development trilogy of nuclear science and technology and its prospect. (authors)

Supporting collaborative discussions on asynchronous time: a technological perspective

OpenAIRE

Caballé, Santi

2011-01-01

The aim of this paper is to report on an experience of using an innovative on-line learning tool to support real, collaborative learning through discussion in asynchronous time. While asynchronous interaction gives rise to unique opportunities that support active, collaborative learning, unique problems also arise, such as frustration, caused by waiting for other peoples' reactions and feedback and the consequent loss of motivation, which has a negative impact on learning outcomes. In order t...

Construction and discussion of the science and technology information network of SWIP

International Nuclear Information System (INIS)

Wang Li; Zhang Yiming

2010-01-01

The digital library needs to be developed with the advancement of digitalisation and network, and the construction of digital information resource is more indispensable. This paper introduces the exploration and the work performed by the Research Office of Science and Technology Information of the Southwestern Institute of Physics with respect to preliminary construction of science and technology (S and T) information network resources and the magnitude alteration of S and T information service platform subsequently and the building of a dynamical network information service mode of its own characteristics. (authors)

A Future-Oriented, Globally Based Curriculum Model for Industrial Technology.

Science.gov (United States)

Hacker, Michael

1982-01-01

Presents a future-oriented curriculum approach for industrial technology programs. Major global issues provide the basic structure for curriculum development. These issues include energy management, resource management, technological advancement, and international relations. Rationales for industrial technology are discussed and a curriculum…

The national laboratory business role in energy technology research and development. Panel Discussion

International Nuclear Information System (INIS)

Sackett, John; Sullivan, Charles J.; Aumeier, Steve; Sanders, Tom; Johnson, Shane; Bennett, Ralph

2001-01-01

Full text of publication follows: Energy issues will play a pivotal role in the economic and political future of the United States. For reasons of both available supply and environmental concerns, development and deployment of new energy technologies is critical. Nuclear technology is important, but economic, political, and technical challenges must be overcome if it is to play a significant role. This session will address business opportunities for national laboratories to contribute to the development and implementation of a national energy strategy, concentrating on the role of nuclear technology. Panelists have been selected from the national laboratories, the U.S. Department of Energy, and state regulators. (authors)

Taming Disruptive Technologies, or How To Remain Relevant in the Digital Age.

Science.gov (United States)

Blackwell, Philip

2001-01-01

Discusses electronic books as a disruptive technology, that is, a technology that has appeal to its users but upsets the traditional models. Highlights include a history of print technology; types of electronic books; reader devices; stakeholders, including users, librarians, and publishers; and how vendors can remain relevant. (LRW)

Encyclopedia of color science and technology

CERN Document Server

2016-01-01

The Encyclopedia of Color Science and Technology provides an authoritative single source for understanding and applying the concepts of color to all fields of science and technology, including artistic and historical aspects of color. Many topics are discussed in this timely reference, including an introduction to the science of color, and entries on the physics, chemistry and perception of color. Color is described as it relates to optical phenomena of color and continues on through colorants and materials used to modulate color and also to human vision of color. The measurement of color is provided as is colorimetry, color spaces, color difference metrics, color appearance models, color order systems and cognitive color. Other topics discussed include industrial color, color imaging, capturing color, displaying color and printing color. Descriptions of color encodings, color management, processing color and applications relating to color synthesis for computer graphics are included in this work. The Encyclo...

75 FR 71464 - Metlife Technology, Operations, and Information Technology Groups Including On-Site Leased...

Science.gov (United States)

2010-11-23

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,210; TA-W-73,210A] Metlife... negative determination regarding the eligibility of workers and former workers of MetLife, Technology... revised certification, and all workers in the group threatened with total or partial separation from...

Human genome project: revolutionizing biology through leveraging technology

Science.gov (United States)

Dahl, Carol A.; Strausberg, Robert L.

1996-04-01

The Human Genome Project (HGP) is an international project to develop genetic, physical, and sequence-based maps of the human genome. Since the inception of the HGP it has been clear that substantially improved technology would be required to meet the scientific goals, particularly in order to acquire the complete sequence of the human genome, and that these technologies coupled with the information forthcoming from the project would have a dramatic effect on the way biomedical research is performed in the future. In this paper, we discuss the state-of-the-art for genomic DNA sequencing, technological challenges that remain, and the potential technological paths that could yield substantially improved genomic sequencing technology. The impact of the technology developed from the HGP is broad-reaching and a discussion of other research and medical applications that are leveraging HGP-derived DNA analysis technologies is included. The multidisciplinary approach to the development of new technologies that has been successful for the HGP provides a paradigm for facilitating new genomic approaches toward understanding the biological role of functional elements and systems within the cell, including those encoded within genomic DNA and their molecular products.

Summary of group discussions

International Nuclear Information System (INIS)

2009-01-01

A key aspect of the workshop was the interaction and exchange of ideas and information among the 40 participants. To facilitate this activity the workshop participants were divided into five discussions groups. These groups reviewed selected subjects and reported back to the main body with summaries of their considerations. Over the 3 days the 5 discussion groups were requested to focus on the following subjects: the characteristics and capabilities of 'good' organisations; how to ensure sufficient resources; how to ensure competence within the organisation; how to demonstrate organisational suitability; the regulatory oversight processes - including their strengths and weaknesses. A list of the related questions that were provided to the discussion groups can be found in Appendix 3. Also included in Appendix 3 are copies of the slides the groups prepared that summarised their considerations

Population Issues. Resources in Technology.

Science.gov (United States)

Technology Teacher, 1991

1991-01-01

Presents information about the problems caused by increasing population. Discusses the environmental impact and the ways that technology can be used to solve problems of overpopulation. Includes possible student outcomes and a student quiz. (JOW)

Offshore platform integration and floatover technology

CERN Document Server

Liu, Gengshen

2017-01-01

This book discusses offshore platform integration technology, focusing on the floatover methodology and its applications. It also addresses topics related to safety and cost-effectiveness, as well as ensuring the success of a project through careful planning and established detailed operation procedure/working manuals, which are rarely found in the published literature. Unlike other publications in this area, the book not only includes details of technology development, but also presents real project cases in the discussion to make it more comprehensible. Each topic is illustrated with carefully created sketches to show the complex operation procedures. .

Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

Science.gov (United States)

Strudwick, Gillian

2015-05-01

The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

High Thrust-to-Power Annular Engine Technology

Science.gov (United States)

Patterson, Michael J.; Thomas, Robert E.; Crofton, Mark W.; Young, Jason A.; Foster, John E.

2015-01-01

Gridded ion engines have the highest efficiency and total impulse of any mature electric propulsion technology, and have been successfully implemented for primary propulsion in both geocentric and heliocentric environments with excellent ground/in-space correlation of performance. However, they have not been optimized to maximize thrust-to-power, an important parameter for Earth orbit transfer applications. This publication discusses technology development work intended to maximize this parameter. These activities include investigating the capabilities of a non-conventional design approach, the annular engine, which has the potential of exceeding the thrust-to-power of other EP technologies. This publication discusses the status of this work, including the fabrication and initial tests of a large-area annular engine. This work is being conducted in collaboration among NASA Glenn Research Center, The Aerospace Corporation, and the University of Michigan.

Expanding Health Technology Assessments to Include Effects on the Environment

DEFF Research Database (Denmark)

Marsh, Kevin; Ganz, Michael Lee; Hsu, John

2016-01-01

decision makers. Health care is an important and sizable sector of the economy that could warrant closer policy attention to its impact on the environment. Considerable work is needed to track decision makers' demands, augment the environmental evidence base, and develop robust methods for capturing......There is growing awareness of the impact of human activity on the climate and the need to stem this impact. Public health care decision makers from Sweden and the United Kingdom have started examining environmental impacts when assessing new technologies. This article considers the case...... and objectives extending beyond health care. Two types of challenges hinder this process. First, the nascent evidence base is insufficient to support the accurate comparison of technologies' environmental impacts. Second, cost-utility analysis, which is favored by many HTA agencies, could capture some...

Conference Proceedings of RADTECH ASIA '99. Radiation Curing: the technology for the next millenium

International Nuclear Information System (INIS)

1999-01-01

Radiation curing (i.e. ultraviolet radiation, electron beams, etc) technology were discussed. All aspects of this technology included equipment , applications, chemistry, performance characterization and measurement, market and economic, new breakthrough were discussed and presented in details

Conference Proceedings of RADTECH ASIA '99. Radiation Curing: the technology for the next millenium

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

Radiation curing (i.e. ultraviolet radiation, electron beams, etc) technology were discussed. All aspects of this technology included equipment , applications, chemistry, performance characterization and measurement, market and economic, new breakthrough were discussed and presented in details.

Horizontal well technology in the oilfield of China

Energy Technology Data Exchange (ETDEWEB)

Xiange, L.; Shangqi, L.; Zhixiang, J. [Research Institute of Petroleum Exploration and Development (China)

1998-12-31

The current state of horizontal well development and enhanced recovery technology in the onshore oilfields of China is described. The paper includes discussion of technology developed for light oil reservoirs, heavy oil reservoirs with thermal recovery, low permeability reservoirs and high water flooding reservoirs. Examples of various applications of the technology are described. 3 refs., 5 tabs., 11 figs.

Technology transfer for adaptation

Science.gov (United States)

Biagini, Bonizella; Kuhl, Laura; Gallagher, Kelly Sims; Ortiz, Claudia

2014-09-01

Technology alone will not be able to solve adaptation challenges, but it is likely to play an important role. As a result of the role of technology in adaptation and the importance of international collaboration for climate change, technology transfer for adaptation is a critical but understudied issue. Through an analysis of Global Environment Facility-managed adaptation projects, we find there is significantly more technology transfer occurring in adaptation projects than might be expected given the pessimistic rhetoric surrounding technology transfer for adaptation. Most projects focused on demonstration and early deployment/niche formation for existing technologies rather than earlier stages of innovation, which is understandable considering the pilot nature of the projects. Key challenges for the transfer process, including technology selection and appropriateness under climate change, markets and access to technology, and diffusion strategies are discussed in more detail.

Arms Control and nonproliferation technologies: Technology options and associated measures for monitoring a Comprehensive Test Ban, Second quarter

Energy Technology Data Exchange (ETDEWEB)

Casey, Leslie A.

1994-01-01

This newsletter contains reprinted papers discussing technology options and associated measures for monitoring a Comprehensive Test Ban Treaty (CTBT). These papers were presented to the Conference on Disarmament (CD) in May and June 1994. An interagency Verification Monitoring Task Force developed the papers. The task force included participants from the Arms Control and Disarmament Agency, the Department of Defense, the Department of Energy, the Intelligence Community, the Department of Interior, and the Department of State. The purpose of this edition of Arms Control and Nonproliferation Technologies is to share these papers with the broad base of stakeholders in a CTBT and to facilitate future technology discussions. The papers in the first group discuss possible technology options for monitoring a CTBT in all environments (underground, underwater, atmosphere, and space). These technologies, along with on-site inspections, would facilitate CTBT monitoring by treaty participants. The papers in the second group present possible associated measures, e.g., information exchanges and transparency measures, that would build confidence among states participating in a CTBT.

Wireless Technology in the Library: The RIT Experience: Overview of the Project.

Science.gov (United States)

Pitkin, Pat

2001-01-01

Provides an overview of a project at RIT (Rochester Institute of Technology) that experimented with wireless technology, including laptop computers that circulate within the library building. Discusses project requirements, including ease of use, low maintenance, and low cost; motivation, including mobility; implementation; and benefits to the…

Educational Technology: Best Practices from America's Schools.

Science.gov (United States)

Bozeman, William C.; Baumbach, Donna J.

This book begins with an overview of computer technology concepts, including computer system configurations, computer communications, and software. Instructional computer applications are then discussed; topics include computer-assisted instruction, computer-managed instruction, computer-enhanced instruction, LOGO, authoring programs, presentation…

Strategies for replacement of obsolete equipment, including reverse engineering

International Nuclear Information System (INIS)

Irish, C.S.

2003-01-01

The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of, (1) commercially available equivalent component, (2) modification of a commercial available component, (3) reverse engineering of the original component and finally (4) design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: 1) Missing, misleading or no information on the original component. 2) Acquiring information from the original equipment manufacturer and the plant. 3) Using a sample component for the replacement evaluation and or reverse engineering. 4) Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

Discussion on the management system technology implementation of multimedia classrooms in the digital campus

Science.gov (United States)

Wang, Bo

2018-04-01

Based on the digitized information and network, digital campus is an integration of teaching, management, science and research, life service and technology service, and it is one of the current mainstream construction form of campus function. This paper regarded the "mobile computing" core digital environment construction development as the background, explored the multiple management system technology content design and achievement of multimedia classrooms in digital campus and scientifically proved the technology superiority of management system.

Discussion in Postsecondary Classrooms

Directory of Open Access Journals (Sweden)

Curt Dudley-Marling

2013-11-01

Full Text Available Spoken language is, arguably, the primary means by which teachers teach and students learn. Much of the literature on language in classrooms has focused on discussion that is seen as both a method of instruction and a curricular outcome. While much of the research on discussion has focused on K-12 classrooms, there is also a body of research examining the efficacy of discussion in postsecondary settings. This article provides a review of this literature in order to consider the effect of discussion on student learning in college and university classrooms, the prevalence of discussion in postsecondary settings, and the quality of discussion in these settings. In general, the results of research on the efficacy of discussion in postsecondary settings are mixed. More seriously, researchers have not been explicit about the meaning of discussion and much of what is called discussion in this body of research is merely recitation with minimal levels of student participation. Although the research on discussion in college and university classrooms is inconclusive, some implications can be drawn from this review of the research including the need for future researchers to clearly define what they mean by “discussion.”

Toward a Post-Modern Agenda in Instructional Technology.

Science.gov (United States)

Solomon, David L.

2000-01-01

Discusses the concept of post-modernism and relates it to the field of instructional technology. Topics include structuralism; semiotics; poststructuralism; deconstruction; knowledge and power; critical theory; self-concept; post-modern assumptions; and potential contributions of post-modern concepts in instructional technology. (Contains 80…

Technology enhanced peer learning and peer assessment

DEFF Research Database (Denmark)

Henriksen, Christian Bugge; Bregnhøj, Henrik; Rosthøj, Susanne

2016-01-01

This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems and Fr...... be a huge benefit from developing learning design patterns that facilitate informal peer learning and reinforce knowledge sharing practices.......This paper explores the application of learning designs featuring formalised and structured technology enhanced peer learning. These include student produced learning elements, peer review discussions and peer assessment in the BSc/MSc level summer course Restoration of European Ecosystems...... and Freshwaters (REEF), the Master thesis preparation seminars for the Master of Public Health (MPH) and the MOOC course Global Environmental Management (GEM). The application of student produced learning elements and peer review discussions is investigated by analyzing quotes from course evaluations...

Particle Bed Reactor engine technology

Science.gov (United States)

Sandler, S.; Feddersen, R.

1992-03-01

This paper discusses the Particle Bed Reactor (PBR) based propulsion system being developed under the Space Nuclear Thermal Propulsion (SNTP) program. A PBR engine is a light weight, compact propulsion system which offers significant improvement over current technology systems. Current performance goals are a system thrust of 75,000 pounds at an Isp of 1000 sec. A target thrust to weight ratio (T/W) of 30 has been established for an unshielded engine. The functionality of the PBR, its pertinent technology issues and the systems required to make up a propulsion system are described herein. Accomplishments to date which include hardware development and tests for the PBR engine are also discussed. This paper is intended to provide information on and describe the current state-of-the-art of PBR technology.

Particle Bed Reactor engine technology

International Nuclear Information System (INIS)

Sandler, S.; Feddersen, R.

1992-01-01

This paper discusses the Particle Bed Reactor (PBR) based propulsion system being developed under the Space Nuclear Thermal Propulsion (SNTP) program. A PBR engine is a light weight, compact propulsion system which offers significant improvement over current technology systems. Current performance goals are a system thrust of 75,000 pounds at an Isp of 1000 sec. A target thrust to weight ratio (T/W) of 30 has been established for an unshielded engine. The functionality of the PBR, its pertinent technology issues and the systems required to make up a propulsion system are described herein. Accomplishments to date which include hardware development and tests for the PBR engine are also discussed. This paper is intended to provide information on and describe the current state-of-the-art of PBR technology. 4 refs

Enhancing Extension Programs by Discussing Water Conservation Technology Adoption with Growers

Science.gov (United States)

Lamm, Alexa J.; Warner, Laura A.; Martin, Emmett T.; White, Sarah A.; Fisher, Paul

2017-01-01

Nursery growers are one of the largest agricultural users of water. Researchers have been developing new water treatment techniques and technologies for nursery growers to assist in preserving this precious resource, yet adoption within the industry has been limited. Extension professionals need to work closely with nursery growers to encourage…

Contemporary Aspects of Marketing in Clinical Trials Including Segments of IT and Technology Transfer

Science.gov (United States)

Stamenovic, Milorad; Dobraca, Amra; Smajlovic, Mersiha

2018-01-01

Introduction: The aim of this paper is to present the marketing strategy and the application of management (marketing management) and advertising in order to increase the efficiency of innovative approach in clinical trials that include and involve the use of new technologies and transfer of technologies. Material and Methods: This paper has a descriptive character and represents a narrative review of the literature and new model implementation. Results: Marketing models are primarily used to improve the inclusion of a larger (and appropriate) number of patients, but they can be credited for the stay and monitoring of patients in the trial. Regulatory mechanisms play an important role in the application of various marketing strategies within clinical trials. The value for the patient as the most important stakeholder is defined in the field of clinical trials according to Kotler’s value model for the consumer. Conclusion: In order to achieve the best results it is important to adequately examine all the elements of clinical trials and apply this knowledge in creation of a marketing plan that will be made in accordance with the legal regulations defined globally and locally. In this paper, two challenges have been highlighted for the adequate application of marketing tools in the field of clinical trials, namely: defining business elements in order to provide an adequate marketing approach for clinical trials and technology transfer and ensuring uniformity and regulatory affirmation of marketing attitudes in clinical trials in all regions in which they are carried out in accordance with ICH-GCP and valid regulations. PMID:29719318

Contemporary Aspects of Marketing in Clinical Trials Including Segments of IT and Technology Transfer.

Science.gov (United States)

Stamenovic, Milorad; Dobraca, Amra; Smajlovic, Mersiha

2018-01-01

The aim of this paper is to present the marketing strategy and the application of management (marketing management) and advertising in order to increase the efficiency of innovative approach in clinical trials that include and involve the use of new technologies and transfer of technologies. This paper has a descriptive character and represents a narrative review of the literature and new model implementation. Marketing models are primarily used to improve the inclusion of a larger (and appropriate) number of patients, but they can be credited for the stay and monitoring of patients in the trial. Regulatory mechanisms play an important role in the application of various marketing strategies within clinical trials. The value for the patient as the most important stakeholder is defined in the field of clinical trials according to Kotler's value model for the consumer. In order to achieve the best results it is important to adequately examine all the elements of clinical trials and apply this knowledge in creation of a marketing plan that will be made in accordance with the legal regulations defined globally and locally. In this paper, two challenges have been highlighted for the adequate application of marketing tools in the field of clinical trials, namely: defining business elements in order to provide an adequate marketing approach for clinical trials and technology transfer and ensuring uniformity and regulatory affirmation of marketing attitudes in clinical trials in all regions in which they are carried out in accordance with ICH-GCP and valid regulations.

Nuclear Science and Technology for Thai Society

International Nuclear Information System (INIS)

Thailand Institute of Nuclear Technology, Bangkok

2009-07-01

Full text: Full text: The 11th conference on the nuclear science and technology was held on 2-3 July 2009 in Bangkok. This conference contain paper on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for the infestation tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

Electric technology in the food service industry; Les technologies electriques dans les services alimentaires

Energy Technology Data Exchange (ETDEWEB)

Labonte, A. [Hydro-Quebec, Montreal, PQ (Canada)

1997-04-01

Many innovative technologies in the food service industry have been made through the use of electricity as a source of energy. Electricity made it possible to improve the productivity and profitability of the food industry. Some of these technologies include: (1) cooking by induction, which is based on the principle of magnetic fields, (2) combined convection ovens which accelerate thermal exchange, and (3) electric fryers. The advantages of each technology were described. The environmental advantage of using electricity as an energy source in the food service industry was also discussed.

The Future of Educational Technology Is Past.

Science.gov (United States)

Mitchell, P. David

1989-01-01

Discusses the field of educational technology and the need for new perspectives on the processes of learning, teaching, and doing research. Topics discussed include the scope of education; goal-directed feedback; control system theory; cybernetics and general system research; self-instruction; and suggestions for future planning for educational…

Technology Solutions for School Food Service.

Science.gov (United States)

Begalle, Mary

2002-01-01

Considers ways to include schools' food service departments in technology planning. Discusses school food service software applications, considerations and challenges of automating food service operations, and business-to-business Internet solutions. (EV)

Smart Technology in Lung Disease Clinical Trials.

Science.gov (United States)

Geller, Nancy L; Kim, Dong-Yun; Tian, Xin

2016-01-01

This article describes the use of smart technology by investigators and patients to facilitate lung disease clinical trials and make them less costly and more efficient. By "smart technology" we include various electronic media, such as computer databases, the Internet, and mobile devices. We first describe the use of electronic health records for identifying potential subjects and then discuss electronic informed consent. We give several examples of using the Internet and mobile technology in clinical trials. Interventions have been delivered via the World Wide Web or via mobile devices, and both have been used to collect outcome data. We discuss examples of new electronic devices that recently have been introduced to collect health data. While use of smart technology in clinical trials is an exciting development, comparison with similar interventions applied in a conventional manner is still in its infancy. We discuss advantages and disadvantages of using this omnipresent, powerful tool in clinical trials, as well as directions for future research. Published by Elsevier Inc.

Report on a visit to Canada to discuss tritium instrumentation and radiological protection

International Nuclear Information System (INIS)

Gibson, J.A.B.

1984-10-01

A report is presented of a visit to Canada on behalf of the CEC DG II/Fusion between the 8th to 13th April 1984. Discussions were arranged by the Canadian Fusion-Fuels Technology Project near Toronto and covered all aspects of tritium technology but especially radiological protection. Visits included the CFFTP Centre, Pickering Nuclear Generating Section, Ontario Hydro's Head Office, Safety Services Department and Research Division, Scintrex Ltd (tritium instrument manufacturers) and the Atomic Energy of Canada (AECL) Chalk River Nuclear laboratories (CRNL). There are clearly many areas for the use of Canadian Technology in Europe, particularly with CRNL and Scintrex on the development of 3 H 2 / 3 H 2 O discriminating monitors. There is some doubt whether these development will be in time for applications at the JET laboratory and the JRC at ISPRA but this collaboration will be pursued. (author)

Midwifery education roundtable discussion: transitions to the workplace.

Science.gov (United States)

Lydon-Rochelle, Mona T; Kantrowitz-Gordon, Ira; Tower, Martha J Jody; Trego, Lori; Lagerberg, Ruth

2002-01-01

A snapshot of four graduates' views on their educational experience at a research institution as well as their perspective on how it prepared them for the challenges they faced in entering the workplace is presented. Discussants stated that research knowledge is a critical aspect to clinical practice. Their educational experience provided them with the ability to understand information technology applications, identify and access relevant scientific research, evaluate the integrity and comparability of research findings, and apply research findings to clinical practice. Areas within the curriculum that were identified as needing more content and/or greater emphasis included primary health care, how to work competently and effectively with persons from diverse cultural, socioeconomic, and racial and ethnic backgrounds, experience with public health providers, and content such as intimate partner violence and adolescent behaviors.

Technology innovation in an integrated energy economy

Energy Technology Data Exchange (ETDEWEB)

Isaacs, E. [Alberta Energy Research Inst., Edmonton, AB (Canada)

2006-07-01

A discussion on technology innovation in an integrated energy economy was presented. The mission, mandate and strategy of the Alberta Research Institute was first presented, followed by a discussion on oil supply needs based on historic demand. The presentation then addressed what might happen as oil demand and supply peak. A comparison of conventional versus unconventional resources was included along with a chart illustrating Alberta's contribution to total global reserves. Other topics addressed in the presentation in chart format included: natural gas requirements and natural gas use in oil sands; marketable gas production and the number of producing gas wells; Alberta's natural gas situation; and net United States imports of natural gas. Options for reducing natural gas consumption in oil sand production processes were also identified. These included steam assisted gravity drainage; solvent processes, electrical heating, combustion, nuclear, geothermal, and gasification processes. Advantages and disadvantages of replacing natural gas through gasification were presented. Last, the presentation provided an unconventional gas technology roadmap and discussed an innovative energy technology program. It was concluded that there are no clear cut options for replacing the huge amount of natural gas needed in the expanding oil sands sector. tabs., figs.

International Drug Discovery Science and Technology--BIT's Seventh Annual Congress.

Science.gov (United States)

Bodovitz, Steven

2010-01-01

BIT's Seventh Annual International Drug Discovery Science and Technology Congress, held in Shanghai, included topics covering new therapeutic and technological developments in the field of drug discovery. This conference report highlights selected presentations on open-access approaches to R&D, novel and multifactorial targets, and technologies that assist drug discovery. Investigational drugs discussed include the anticancer agents astuprotimut-r (GlaxoSmithKline plc) and AS-1411 (Antisoma plc).

Passive solar technology

Energy Technology Data Exchange (ETDEWEB)

Watson, D

1981-04-01

The present status of passive solar technology is summarized, including passive solar heating, cooling and daylighting. The key roles of the passive solar system designer and of innovation in the building industry are described. After definitions of passive design and a summary of passive design principles are given, performance and costs of passive solar technology are discussed. Passive energy design concepts or methods are then considered in the context of the overall process by which building decisions are made to achieve the integration of new techniques into conventional design. (LEW).

Geothermal Today: 2003 Geothermal Technologies Program Highlights (Revised)

Energy Technology Data Exchange (ETDEWEB)

2004-05-01

This outreach publication highlights milestones and accomplishments of the DOE Geothermal Technologies Program for 2003. Included in this publication are discussions of geothermal fundamentals, enhanced geothermal systems, direct-use applications, geothermal potential in Idaho, coating technology, energy conversion R&D, and the GeoPowering the West initiative.

Integrating technologies for scalable ecology and conservation

OpenAIRE

David C. Marvin; Lian Pin Koh; Antony J. Lynam; Serge Wich; Andrew B. Davies; Ramesh Krishnamurthy; Emma Stokes; Ruth Starkey; Gregory P. Asner

2016-01-01

Integration of multiple technologies greatly increases the spatial and temporal scales over which ecological patterns and processes can be studied, and threats to protected ecosystems can be identified and mitigated. A range of technology options relevant to ecologists and conservation practitioners are described, including ways they can be linked to increase the dimensionality of data collection efforts. Remote sensing, ground-based, and data fusion technologies are broadly discussed in the ...

Innovative technologies for groundwater cleanup

International Nuclear Information System (INIS)

Yow, J.L. Jr.

1992-09-01

These notes provide a broad overview of current developments in innovative technologies for groundwater cleanup. In this context, groundwater cleanup technologies include site remediation methods that deal with contaminants in ground water or that may move from the vadose zone into ground water. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in groundwater cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the site-specific technical challenges presented by each groundwater contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After reviewing a representative selection of these technologies, one of the new technologies, the Microbial Filter method, is discussed in more detail to highlight a promising in situ groundwater cleanup technology that is now being readied for field testing

Innovative technologies for soil cleanup

International Nuclear Information System (INIS)

Yow, J.L. Jr.

1992-09-01

These notes provide a broad overview of current developments in innovative technologies for soil cleanup. In this context, soil cleanup technologies include site remediation methods that deal primarily with the vadose zone and with relatively shallow, near-surface contamination of soil or rock materials. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in soil cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the sits-specific technical challenges presented by each sold contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After cataloging a representative selection of these technologies, one of the new technologies, Dynamic Underground Stripping, is discussed in more detail to highlight a promising soil cleanup technology that is now being field tested

2nd Essen specialized discussions about repository mining

International Nuclear Information System (INIS)

Reinartz, Jerome

2013-01-01

The final storage of nuclear waste in Germany right now is more a political and societal than technical process. To promote the exchange of experience in the sophisticated field of mining technology, and put the focus back on finding a repository solution, the DMT in cooperation with GNS and DBE Technology initiated the Essen Specialized Discussions about Repository Mining. On February 28, more than 120 participants sought information about recent developments, exchanged experience, and maintained contacts. (orig.)

Review of infrared scene projector technology-1993

Science.gov (United States)

Driggers, Ronald G.; Barnard, Kenneth J.; Burroughs, E. E.; Deep, Raymond G.; Williams, Owen M.

1994-07-01

The importance of testing IR imagers and missile seekers with realistic IR scenes warrants a review of the current technologies used in dynamic infrared scene projection. These technologies include resistive arrays, deformable mirror arrays, mirror membrane devices, liquid crystal light valves, laser writers, laser diode arrays, and CRTs. Other methods include frustrated total internal reflection, thermoelectric devices, galvanic cells, Bly cells, and vanadium dioxide. A description of each technology is presented along with a discussion of their relative benefits and disadvantages. The current state of each methodology is also summarized. Finally, the methods are compared and contrasted in terms of their performance parameters.

Workshop on power conditioning for alternative energy technologies. Executive summary

Energy Technology Data Exchange (ETDEWEB)

Smith, D. R.

1979-01-01

As various alternative energy technologies such as photovoltaics, wind, fuel cells, and batteries are emerging as potential sources of energy for the future, the need arises for development of suitable power-conditioning systems to interface these sources to their respective loads. Since most of these sources produce dc electricity and most electrical loads require ac, an important component of the required power-conditioning units is a dc-to-ac inverter. The discussions deal with the development of power conditioners for each alternative energy technology. Discussion topics include assessments of current technology, identification of operational requirements with a comparison of requirements for each source technology, the identification of future technology trends, the determination of mass production and marketing requirements, and recommendations for program direction. Specifically, one working group dealt with source technology: photovoltaics, fuel cells and batteries, and wind followed by sessions discussing system size and application: large grid-connected systems, small grid-connected systems, and stand alone and dc applications. A combined group session provided an opportunity to discuss problems common to power conditioning development.

Focus on Technologies: Worry or Technology?

Directory of Open Access Journals (Sweden)

Saulius Kanišauskas

2015-10-01

Full Text Available The paper analyses different attitudes towards technologies in contemporary philosophical discourses. It points out that classical notion of technology formulated by Martin Heidegger seems to be more and more often questioned and even forgotten. As a result, it is being replaced by the theory of determinism, according to which the change of technologies determines the changes in social systems, the human being including. This happens this way and not vice versa. Nowadays technē, or “technika” (in English: technology is mostly understood in the instrumental meaning or in the meaning of power. It is considered to be a powerful means, tool or mechanism to influence, change, control and manipulate human consciousness and human feelings. Despite the fact that technologies have already been tamed, the problem of huge responsibility for using and developing them arises. It is questioned whether the increasing society’s attention to modern technologies is not a particular “technology” of the postmodern capitalism to manipulate social consciousness. In parallel with “yes” answer to this question, Albert Borgmann’s idea that the causes of technological development have an ontological dimension, i.e. the causes are rooted in the nature of human beings themselves and their desire to adore own creativity, is discussed. Thus, it becomes necessary to probe deeper into the nature of creativity.

How Technology Teachers Understand Technological Knowledge

Science.gov (United States)

Norström, Per

2014-01-01

Swedish technology teachers' views of technological knowledge are examined through a written survey and a series of interviews. The study indicates that technology teachers' understandings of what constitutes technological knowledge and how it is justified vary considerably. The philosophical discussions on the topic are unknown to them. This lack…

Publications in academic medical centers: technology-facilitated culture clash.

Science.gov (United States)

Berner, Eta S

2014-05-01

Academic culture has a set of norms, expectations, and values that are sometimes tacit and sometimes very explicit. In medical school and other health professions educational settings, probably the most common norm includes placing a high value on peer-reviewed research publications, which are seen as the major evidence of scholarly productivity. Other features of academic culture include encouraging junior faculty and graduate students to share their research results at professional conferences and lecturing with slides as a major way to convey information. Major values that faculty share with journal editors include responsible conduct of research and proper attribution of others' words and ideas. Medical school faculty also value technology and are often quick to embrace technological advances that can assist them in their teaching and research. This article addresses the effects of technology on three aspects of academic culture: education, presentations at professional meetings, and research publications.The technologies discussed include online instruction, dissemination of conference proceedings on the Internet, plagiarism-detection software, and new technologies deployed by the National Center for Biotechnology Information, the home of PubMed. The author describes how the ease of deploying new technologies without faculty changing their norms and behavior in the areas of teaching and research can lead to conflicts of values among key stakeholders in the academic medical community, including faculty, journal editors, and professional associations. The implications of these conflicts and strategies for managing them are discussed.

The Lab of the Future: Using Technology to Teach Foreign Language.

Science.gov (United States)

Underwood, John H.

1993-01-01

Describes the role of technology in teaching foreign languages. Offers a brief history of language lab technologies, including computer use for drill-and-practice, text reconstruction, and simulations and games. Discusses tool programs, intelligent systems, video technology, satellite television, videodisc and interactive video, hypertext and…

75 FR 8427 - Civil Supersonic Aircraft Panel Discussion

Science.gov (United States)

2010-02-24

... entitled, ``State of the Art of Supersonics Aircraft Technology--What has progressed in science since 1973... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Civil Supersonic Aircraft Panel Discussion AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of meeting participation...

Renewable Energy: Markets and Prospects by Technology

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

This information paper accompanies the IEA publication Deploying Renewables 2011: Best and Future Policy Practice (IEA, 2011a). It provides more detailed data and analysis, and explores the markets, policies and prospects for a number of renewable energy technologies. This paper provides a discussion of ten technology areas: bioenergy for electricity and heat, biofuels, geothermal energy, hydro energy, ocean energy, solar energy (solar photovoltaics, concentrating solar power, and solar heating), and wind energy (onshore and offshore). Each technology discussion includes: the current technical and market status; the current costs of energy production and cost trends; the policy environment; the potential and projections for the future; and an analysis of the prospects and key hurdles to future expansion.

Learning with and about Technology: A Middle School Nature Area.

Science.gov (United States)

Fetterman, David

1998-01-01

Discussion of learning with technology as well as about technology focuses on a case study of a middle school nature area that uses technology to extend accessibility of environmental data. Highlights include the design of Web pages to describe the nature area; file sharing software; and the use of videoconferencing. (LRW)

Using information technology to measure, monitor and report on environmental performance

Energy Technology Data Exchange (ETDEWEB)

Ford, G.

1999-07-01

This article provides an overview of the process of environmental performance evaluation (EPE), including a discussion of the rationale and context for EPE as a key component of environmental management and sustainability metrics for businesses around the world. New and emerging developments, such as environmental performance benchmarking and standardized reporting, are highlighted. The ISO 14000 model for EPE and its environmental performance indicators is described. The article then discusses the need for new technology, including the Internet, to meet these new demands, and examines the important role of information technology in creating an efficient and effective system for the EPE process. In this regard, issues such as scaleability, data identification, data collection, reporting, user interface, integration and data warehousing are explored, and examples of the application of information technology to address these issues are provided. The article concludes with a discussion of the need to use emerging information technology to integrate various key types of performance information, including environmental, according to the balanced scorecard model for integrated business sustainability metrics. It concludes that such technology should be used now, even in the absence of global standards for performance metrics, and in spite of the theoretical and practical challenges in doing so, in order to move toward the important goal of achieving comprehensive sustainability metrics.

Ethics and Information Technology: Some Principles To Guide Students.

Science.gov (United States)

Bodi, Sonia

1998-01-01

Discusses the ethical challenges of information technology, particularly electronic indexes and the Internet; considers principles to guide students; and discusses possible librarian responses. Topics include Kant's categorical imperative, ownership, right to privacy, social responsibility, self-respect, plagiarism and copyrights, and three…

Lean Mean Times--Budgeting for School Media Technology.

Science.gov (United States)

Johnson, Doug

1995-01-01

Discusses budgeting strategies for school media technology programs. Highlights include sources for school funding, school district budget information, control of the budget, how to write an effective budget, working with other community and school groups, local politics, and sidebars that discuss spreadsheets and maintenance budgets. (LRW)

Innovative Technology in Engineering Education.

Science.gov (United States)

Fishwick, Wilfred

1991-01-01

Discusses the impact that computer-assisted technologies, including applications to software, video recordings, and satellite broadcasts, have had upon the conventions and procedures within engineering education. Calls for the complete utilization of such devices through their appropriate integration into updated education activities effectively…

Fuel ethanol discussion paper

International Nuclear Information System (INIS)

1992-01-01

In recognition of the potential benefits of ethanol and the merits of encouraging value-added agricultural development, a committee was formed to develop options for the role of the Ontario Ministry of Agriculture and Food in the further development of the ethanol industry in Ontario. A consultation with interested parties produced a discussion paper which begins with an outline of the role of ethanol as an alternative fuel. Ethanol issues which require industry consideration are presented, including the function of ethanol as a gasoline oxygenate or octane enhancer, environmental impacts, energy impacts, agricultural impacts, trade and fiscal implications, and regulation. The ethanol industry and distribution systems in Ontario are then described. The current industry consists of one ethanol plant and over 30 retail stations. The key issue for expanding the industry is the economics of producing ethanol. At present, production of ethanol in the short term depends on tax incentives amounting to 23.2 cents/l. In the longer term, a significant reduction in feedstock costs and a significant improvement in processing technology, or equally significant gasoline price increases, will be needed to create a sustainable ethanol industry that does not need incentives. Possible roles for the Ministry are identified, such as support for ethanol research and development, financial support for construction of ethanol plants, and active encouragement of market demand for ethanol-blended gasolines

Discussing implications of technology and energy on society: the role of the teachers

International Nuclear Information System (INIS)

Gunnell, B.J.

1994-01-01

In exploring the implications of technology with pupils (in science, in geography, in technology, in history), teachers carry the fundamental responsibility of encouraging the formation of pupils' personal opinions but not influencing them. Realizing the teacher's role passes by open minded, well informed and confident teachers, well suited learning approaches (group work, role play...) and suitable resources (equipment...). Whilst evolving in many schools and curriculum areas within England and Wales, the consideration of controversial issues is constrained by competing pressures upon teachers and the curriculum

Proceedings of the 7. Nuclear Science and Technology Conference

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

The 7. conference on nuclear science and technology was held on 1-2 December 1998 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for disinfestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

3rd International Conference on Intelligent Technologies and Engineering Systems

CERN Document Server

2016-01-01

This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies, and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial, and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing.

Qualitative Analysis of Round-Table Discussions on the Business Case and Procurement Challenges for Hospital Electronic Prescribing Systems

Science.gov (United States)

Cresswell, Kathrin M.; Slee, Ann; Coleman, Jamie; Williams, Robin; Bates, David W.; Sheikh, Aziz

2013-01-01

Objectives There is a pressing need to understand the challenges surrounding procurement of and business case development for hospital electronic prescribing systems, and to identify possible strategies to enhance the efficiency of these processes in order to assist strategic decision making. Materials and Methods We organized eight multi-disciplinary round-table discussions in the United Kingdom. Participants included policy makers, representatives from hospitals, system developers, academics, and patients. Each discussion was digitally audio-recorded, transcribed verbatim and, together with accompanying field notes, analyzed thematically with NVivo9. Results We drew on data from 17 participants (approximately eight per roundtable), six hours of discussion, and 15 pages of field notes. Key challenges included silo planning with systems not being considered as part of an integrated organizational information technology strategy, lack of opportunity for interactions between customers and potential suppliers, lack of support for hospitals in choosing appropriate systems, difficulty of balancing structured planning with flexibility, and the on-going challenge of distinguishing “wants” and aspirations from organizational “needs”. Discussion and conclusions Development of business cases for major investments in information technology does not take place in an organizational vacuum. Building on previously identified potentially transferable dimensions to the development and execution of business cases surrounding measurements of costs/benefits and risk management, we have identified additional components relevant to ePrescribing systems. These include: considerations surrounding strategic context, case for change and objectives, future service requirements and options appraisal, capital and revenue implications, timescale and deliverability, and risk analysis and management. PMID:24260213

Bringing Technology to Students' Proximity: A Sociocultural Account of Technology-Based Learning Projects

Science.gov (United States)

Mukama, Evode

2014-01-01

This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs) through a sociocultural perspective. The methodology included focus group discussions and field…

The Next Technology Revolution - Nano Electronic Technology

Science.gov (United States)

Turlik, Iwona

2004-03-01

Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

Economic aspects of advanced energy technologies

International Nuclear Information System (INIS)

Ramakumar, R.; Rodriguez, A.P.; Venkata, S.S.

1993-01-01

Advanced energy technologies span a wide variety of resources, techniques, and end-user requirements. Economic considerations are major factors that shape their harnessing and utilization. A discussion of the basic factors in the economic arena is presented, with particular emphasis on renewable energy technologies--photovoltaics, solar-thermal, wind-electric conversion, biomass utilization, hydro, and tidal and wave energy systems. The following are essential to determine appropriate energy system topologies: proper resource-need matching with an eye on the quality of energy requirements, integrated use of several resources and technologies, and a comprehensive consideration which includes prospecting, collection, conversion, transportation, distribution, storage and reconversion, end use, and subsequent waste management aspects. A few case studies are included to apprise the reader of the status of some of the key technologies and systems

Active food packaging technologies.

Science.gov (United States)

Ozdemir, Murat; Floros, John D

2004-01-01

Active packaging technologies offer new opportunities for the food industry, in the preservation of foods. Important active packaging systems currently known to date, including oxygen scavengers, carbon dioxide emitters/absorbers, moisture absorbers, ethylene absorbers, ethanol emitters, flavor releasing/absorbing systems, time-temperature indicators, and antimicrobial containing films, are reviewed. The principle of operation of each active system is briefly explained. Recent technological advances in active packaging are discussed, and food related applications are presented. The effects of active packaging systems on food quality and safety are cited.

Disruptive Logic Architectures and Technologies From Device to System Level

CERN Document Server

Gaillardon, Pierre-Emmanuel; Clermidy, Fabien

2012-01-01

This book discusses the opportunities offered by disruptive technologies to overcome the economical and physical limits currently faced by the electronics industry. It provides a new methodology for the fast evaluation of an emerging technology from an architectural perspective and discusses the implications from simple circuits to complex architectures. Several technologies are discussed, ranging from 3-D integration of devices (Phase Change Memories, Monolithic 3-D, Vertical NanoWires-based transistors) to dense 2-D arrangements (Double-Gate Carbon Nanotubes, Sublithographic Nanowires, Lithographic Crossbar arrangements). Novel architectural organizations, as well as the associated tools, are presented in order to explore this freshly opened design space. Describes a novel architectural organization for future reconfigurable systems; Includes a complete benchmarking toolflow for emerging technologies; Generalizes the description of reconfigurable circuits in terms of hierarchical levels; Assesses disruptive...

Staying connected: online education engagement and retention using educational technology tools.

Science.gov (United States)

Salazar, Jose

2010-01-01

The objective of this article is to inform educators about the use of currently available educational technology tools to promote student retention, engagement and interaction in online courses. Educational technology tools include content management systems, podcasts, video lecture capture technology and electronic discussion boards. Successful use of educational technology tools requires planning, organization and use of effective learning strategies.

State perspectives on clean coal technology deployment

Energy Technology Data Exchange (ETDEWEB)

Moreland, T. [State of Illinois Washington Office, Washington, DC (United States)

1997-12-31

State governments have been funding partners in the Clean Coal Technology program since its beginnings. Today, regulatory and market uncertainties and tight budgets have reduced state investment in energy R and D, but states have developed program initiatives in support of deployment. State officials think that the federal government must continue to support these technologies in the deployment phase. Discussions of national energy policy must include attention to the Clean Coal Technology program and its accomplishments.

Technology-mediated therapy for chronic pain management: the challenges of adapting behavior change interventions for delivery with pervasive communication technology.

Science.gov (United States)

Rosser, Benjamin A; McCullagh, Paul; Davies, Richard; Mountain, Gail A; McCracken, Lance; Eccleston, Christopher

2011-04-01

Adapting therapeutic practice from traditional face-to-face exchange to remote technology-based delivery presents challenges for the therapist, patient, and technical writer. This article documents the process of therapy adaptation and the resultant specification for the SMART2 project-a technology-based self-management system for assisting long-term health conditions, including chronic pain. Focus group discussions with healthcare professionals and patients were conducted to inform selection of therapeutic objectives and appropriate technology. Pertinent challenges are identified, relating to (1) reduction and definition of therapeutic objectives, and (2) how to approach adaptation of therapy to a form suited to technology delivery. The requirement of the system to provide dynamic and intelligent responses to patient experience and behavior is also emphasized. Solutions to these challenges are described in the context of the SMART2 technology-based intervention. More explicit discussion and documentation of therapy adaptation to technology-based delivery within the literature is encouraged.

Third annual women in science and technology conference

Energy Technology Data Exchange (ETDEWEB)

1992-12-31

This report presents discussions presented at the conference for women in science and technology. Topics include balancing careers with the family, choices concerning graduate schools, and sexual harassment.

Third annual women in science and technology conference

Energy Technology Data Exchange (ETDEWEB)

1992-01-01

This report presents discussions presented at the conference for women in science and technology. Topics include balancing careers with the family, choices concerning graduate schools, and sexual harassment.

Solid-state lighting technology perspective.

Energy Technology Data Exchange (ETDEWEB)

Tsao, Jeffrey Yeenien; Coltrin, Michael Elliott

2006-08-01

Solid-State Lighting (SSL) uses inorganic light-emitting diodes (LEDs) and organic light-emitting diodes (OLEDs) to convert electricity into light for illumination. SSL has the potential for enormous energy savings and accompanying environmental benefits if its promise of 50% (or greater) energy efficiencies can be achieved. This report provides a broad summary of the technologies that underlie SSL. The applications for SSL and potential impact on U.S. and world-wide energy consumption, and impact on the human visual experience are discussed. The properties of visible light and different technical metrics to characterize its properties are summarized. The many factors contributing to the capital and operating costs for SSL and traditional lighting sources (incandescent, fluorescent, and high-intensity discharge lamps) are discussed, with extrapolations for future SSL goals. The technologies underlying LEDs and OLEDs are also described, including current and possible alternative future technologies and some of the present limitations.

After globalization future security in a technology rich world

Energy Technology Data Exchange (ETDEWEB)

Gilmartin, T J

2000-02-12

Over the course of the year 2000, five one-day workshops were conducted by the Center for Global Security Research at the Lawrence Livermore National Laboratory on threats that might come against the US and its allies in the 2015 to 2020 timeframe due to the global availability of advanced technology. These workshops focused on threats that are enabled by nuclear, missile, and space technology; military technology; information technology; bio technology; and geo systems technology. In December, an Integration Workshop and Senior Review before national leaders and experts were held. The participants and reviewers were invited from the DOE National Laboratories, the DOD Services, OSD, DTRA, and DARPA, the DOS, NASA, Congressional technical staff, the intelligence community, universities and university study centers, think tanks, consultants on national security issues, and private industry. For each workshop the process of analysis involved identification and prioritization of the participants' perceived most severe threat scenarios (worst nightmares), discussion of the technologies which enabled those threats, and ranking of the technologies' threat potentials. We were not concerned in this exercise with defining responses, although our assessment of each threat's severity included consideration of the ease or difficulty with which it might be countered. At the concluding Integration Workshop and Senior Panel Review, we brought the various workshops' participants together, added senior participant/reviewers with broad experience and responsibility, and discussed the workshop findings to determine what is most certain, and uncertain, and what might be needed to resolve our uncertainties. This document reports the consensus and important variations of both the reviewers and the participants. In all, 45 threats over a wide range of lethality and probability of occurrence were identified. Over 60 enabling technologies were also discussed. These are

Research on Key Technology and Applications for Internet of Things

Science.gov (United States)

Chen, Xian-Yi; Jin, Zhi-Gang

The Internet of Things (IOT) has been paid more and more attention by the academe, industry, and government all over the world. The concept of IOT and the architecture of IOT are discussed. The key technologies of IOT, including Radio Frequency Identification technology, Electronic Product Code technology, and ZigBee technology are analyzed. The framework of digital agriculture application based on IOT is proposed.

Technology-assisted Interventions for Parents of Young Children: Emerging Practices, Current Research, and Future Directions.

Science.gov (United States)

Hall, Cristin M; Bierman, Karen L

Technology can potentially expand the reach and cut the costs of providing effective, evidence-based interventions. This paper reviews existing publications that describe the application and evaluation of technology-assisted interventions for parents of young children. A broad review of the early childhood literature revealed 48 studies describing technology-assisted parent education and interventions. Across these studies, multiple forms of technology were used, including web-based platforms, discussion forums, mobile devices, and video conferencing. Results are described moving from feasibility and acceptability of technology-based delivery systems to more rigorous evaluations examining their impact on parent and child outcomes. Potential exists for technology to deliver interventions to parents. Limitations are discussed including differential acceptability and elevated attrition associated with internet-only intervention delivery.

Art technologies as possible propulsars in technological innovation

DEFF Research Database (Denmark)

Jørgensen, Lars Botin

2003-01-01

kind. This discussion, of general character, constitutes the initial part of this paper. Then it briefly looks into the final terms of the papertitle and try to relate to the diffuse and discussed technological innovation. Both aspects – art and technology and technological innovation – will be dealt...... with from a historical/hermeneutic and social constructivist point of view, as the paper moves from a general principal level to a more specific, exemplary level, where three different art technologies are presented as possible propulsars in technological innovation.......Art and technology has, as the German philosopher Martin Heidegger points out, the same etymological root. A thorough investigation of the relationship between art and technology will show how this same root has manifested itself in different times and spaces bringing results of the most variegated...

A Lunar Surface System Supportability Technology Development Roadmap

Science.gov (United States)

Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

2011-01-01

This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set

Scaffolding scientific discussion using socially relevant representations in networked multimedia

Science.gov (United States)

Hoadley, Christopher M.

1999-11-01

How do students make use of social cues when learning on the computer? This work examines how students in a middle-school science course learned through on-line peer discussion. Cognitive accounts of collaboration stress interacting with ideas, while socially situated accounts stress the interpersonal context. The design of electronic environments allows investigation into the interrelation of cognitive and social dimensions. I use on-line peer discussion to investigate how socially relevant representations in interfaces can aid learning. First, I identify some of the variables that affect individual participation in on-line discussion, including interface features. Individual participation is predicted by student attitudes towards learning from peers. Second, I describe the range of group outcomes for these on-line discussions. There is a large effect of discussion group on learning outcomes which is not reducible to group composition or gross measures of group process. Third, I characterize how students (individually) construct understanding from these group discussions. Learning in the on-line discussions is shown to be a result of sustained interaction over time, not merely encountering or expressing ideas. Experimental manipulations in the types of social cues available to students suggest that many students do use socially relevant representations to support their understanding of multiple viewpoints and science reasoning. Personalizing scientific disputes can afford reflection on the nature of scientific discovery and advance. While there are many individual differences in how social representations are used by students in learning, overall learning benefits for certain social representations can be shown. This work has profound implications for design of collaborative instructional methods, equitable access to science learning, design of instructional technology, and understanding of learning and cognition in social settings.

Gas-fired electric power generating technologies

International Nuclear Information System (INIS)

1994-09-01

The workshop that was held in Madrid 25-27 May 1994 included participation by experts from 16 countries. They represented such diverse fields and disciplines as technology, governmental regulation, economics, and environment. Thus, the participants provided an excellent cross section of key areas and a diversity of viewpoints. At the workshop, a broad range of topics regarding gas-fired electric power generation was discussed. These included political, regulatory and financial issues as well as more specific technical questions regarding the environment, energy efficiency, advanced generation technologies and the status of competitive developments. Important technological advances in gas-based power and CHP technologies have already been achieved including higher energy efficiency and lower emissions, with further improvements expected in the near future. Advanced technology trends include: (a) The use of gas technology to reduce emissions from existing coal-fired power plants. (b) The wide-spread application of combined-cycle gas turbines in new power plants and the growing use of aero-derivative gas turbines in CHP applications. (c) Phosphoric acid fuel cells that are being introduced commercially. Their market penetration will grow over the next 10 years. The next generation of fuel cells (solid oxide and molten carbonate) is expected to enter the market around the year 2000. (EG)

2015 International Conference on Information Technology and Intelligent Transportation Systems

CERN Document Server

Jain, Lakhmi; Zhao, Xiangmo

2017-01-01

This volume includes the proceedings of the 2015 International Conference on Information Technology and Intelligent Transportation Systems (ITITS 2015) which was held in Xi’an on December 12-13, 2015. The conference provided a platform for all professionals and researchers from industry and academia to present and discuss recent advances in the field of Information Technology and Intelligent Transportation Systems. The presented information technologies are connected to intelligent transportation systems including wireless communication, computational technologies, floating car data/floating cellular data, sensing technologies, and video vehicle detection. The articles focusing on intelligent transport systems vary in the technologies applied, from basic management systems to more application systems including topics such as emergency vehicle notification systems, automatic road enforcement, collision avoidance systems and some cooperative systems. The conference hosted 12 invited speakers and over 200 part...

Can nuclear power be enough for future technology?

International Nuclear Information System (INIS)

Serizawa, Akimi

2017-01-01

This paper focused on the report 'Can nuclear power be future technology?' published on September 28, 2008 by the Leading R and D Committee of Japan Society for the Promotion of Science. It took up part of the discussions at the general discussion session, and those of two working groups mainly by young committee members, and summarized and compiled them. Regarding 'maturity of nuclear technology as future technology,' this paper summarized and discussed from the technical viewpoint the current situation and problems of nuclear power in consideration of the future. Major topics include (1) nuclear safety and disaster prevention, (2) decommissioning of rectors (normal reactors, and accident reactors), (3) back end, (4) effects of low-level radiation, (5) technology trends, (6) economic efficiency, and (7) human resource development. Regarding 'social acceptability of nuclear energy,' the following were discussed: (1) basic human rights such as 'moral rights' and nuclear technologies, (2) risk communication and its problems, and (3) measures to improve the reliability of stakeholders involved in nuclear power. Regarding 'nuclear accident responding team,' this paper covered the nuclear accident responding unit founded in France after the nuclear accident in Japan, and nuclear accident responding unit founded in Japan. (A.O.)

Discussion of high brightness rf linear accelerators

International Nuclear Information System (INIS)

Jameson, R.A.

1987-01-01

The fundamental aspects of high-brightness rf linacs are outlined, showing the breadth and complexity of the technology and indicating that synergism with advancements in other areas is important. Areas of technology reviewed include ion sources, injectors, rf accelerator structures, beam dynamics, rf power, and automatic control

Qualitative analysis of round-table discussions on the business case and procurement challenges for hospital electronic prescribing systems.

Directory of Open Access Journals (Sweden)

Kathrin M Cresswell

Full Text Available There is a pressing need to understand the challenges surrounding procurement of and business case development for hospital electronic prescribing systems, and to identify possible strategies to enhance the efficiency of these processes in order to assist strategic decision making.We organized eight multi-disciplinary round-table discussions in the United Kingdom. Participants included policy makers, representatives from hospitals, system developers, academics, and patients. Each discussion was digitally audio-recorded, transcribed verbatim and, together with accompanying field notes, analyzed thematically with NVivo9.We drew on data from 17 participants (approximately eight per roundtable, six hours of discussion, and 15 pages of field notes. Key challenges included silo planning with systems not being considered as part of an integrated organizational information technology strategy, lack of opportunity for interactions between customers and potential suppliers, lack of support for hospitals in choosing appropriate systems, difficulty of balancing structured planning with flexibility, and the on-going challenge of distinguishing "wants" and aspirations from organizational "needs".Development of business cases for major investments in information technology does not take place in an organizational vacuum. Building on previously identified potentially transferable dimensions to the development and execution of business cases surrounding measurements of costs/benefits and risk management, we have identified additional components relevant to ePrescribing systems. These include: considerations surrounding strategic context, case for change and objectives, future service requirements and options appraisal, capital and revenue implications, timescale and deliverability, and risk analysis and management.

Introduction to the study of solar technology

Energy Technology Data Exchange (ETDEWEB)

Touchais, M

1979-01-01

The conversion of solar energy to meet the world's energy requirements by means of solar technology is discussed as preface to an introductory course in solar technology. The significance of the energy crisis of 1973 to the development of alternative sources of energy, primarily solar, is considered, and the amount of recoverable solar energy incident on the earth is estimated to be able to supply the world's energy demand. The various means of solar energy conversion, including thermal, chemical in the form of hydrogen or methane, and direct or thermal electrical, are examined, and areas of these technologies requiring further experimental investigation are indicated. Solar technology is presented as the science of the artificial applications of solar energy, with mention of its associated disciplines, and the deficiencies of the solar technology developed prior to the energy crisis are exposed. Goals for contemporary instruction in solar technology are then derived, the introductory course is outlined, and bibliographic references are presented. Differences between the sources of solar and traditional energies are also discussed.

Proceedings of 6th Science and Technology Congress and Seminar : vision 2020 through science and technology

International Nuclear Information System (INIS)

1992-01-01

This book compiled the abstracts of papers presented in this congress and seminar. Topics discussed cover all aspects of science and technology included commerciallization, human resources development, research and development, incentives and initiative, etc. There are classified under industry, agriculture, medicine, strategy and social

The Emergence of Personalized Health Technology.

Science.gov (United States)

Allen, Luke Nelson; Christie, Gillian Pepall

2016-05-10

Personalized health technology is a noisy new entrant to the health space, yet to make a significant impact on population health but seemingly teeming with potential. Devices including wearable fitness trackers and healthy-living apps are designed to help users quantify and improve their health behaviors. Although the ethical issues surrounding data privacy have received much attention, little is being said about the impact on socioeconomic health inequalities. Populations who stand to benefit the most from these technologies are unable to afford, access, or use them. This paper outlines the negative impact that these technologies will have on inequalities unless their user base can be radically extended to include vulnerable populations. Frugal innovation and public-private partnership are discussed as the major means for reaching this end.

Proceedings of the 5th nuclear science and technology conference

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-11-01

The 5th conference on nuclear science and technology was held on 21-23 November, 1992 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application including irradiation of food for desinfestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of the nuclear power industry are also discussed.

Proceedings of the 5th nuclear science and technology conference

International Nuclear Information System (INIS)

1994-11-01

The 5th conference on nuclear science and technology was held on 21-23 November, 1992 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application including irradiation of food for desinfestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of the nuclear power industry are also discussed

Proceedings of the 6th nuclear science and technology conference

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-01

The 6th conference on nuclear science and technology was held on 2 - 4 December, 1996 in Bangkok. This conference contain papers on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestation; tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

Teaching and Technologies for Human Development.

Science.gov (United States)

Chickering, Arthur W.; Payne, Carla; Poitras, Gail

2001-01-01

Discusses the potential of emerging communication and information technologies in terms of human development. Topics include distinctions between training and education, instrumental and developmental purposes, and differentiation and integration; developmental stages theory; a leadership seminar based on developmental stages; and uses of…

People's Republic of China's Technological Capability

OpenAIRE

Jon Sigurdson

2004-01-01

This paper discusses the importance of the People's Republic of China in the global economy by exemplifying industrial sectors where it has established a strong competitive advantage. The author accounts for China's growth by looking at factors such as direct foreign investment and investment in research and development. This paper discusses several economic sectors including the textile, electronics, semiconductor, and aircraft industries as cases where China has upgraded its technological p...

Technology development life cycle processes.

Energy Technology Data Exchange (ETDEWEB)

Beck, David Franklin

2013-05-01

This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

Technology transfer at TRIUMF

International Nuclear Information System (INIS)

Gardner, P.

1994-06-01

TRIUMF is Canada's major national research centre for sub-atomic physics. For the past five or six years, there has been an increasing emphasis on commercializing the technology that has emanated from the scientific research at the facility. This emphasis on technology transfer reflects a national policy trend of the Canadian federal government, which is the funding source for the majority of the research performed at TRIUMF. In TRIUMF's case, however, the initiative and funding for the commercialization office came from the provincial, or local government. This paper will describe the evolution of technology transfer at the TRIUMF facility, identifying the theory, policies and practical procedures that have been developed and followed. It will also include TRIUMF's experiences in finding exploitable technologies, protecting those technologies, and locating and linking with suitable industry partners to commercialize the technologies. There will be a discussion of resource allocation, and how TRIUMF has endeavoured to establish a portfolio of projects of assorted risks and expected returns. (author). 15 refs

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY

Energy Technology Data Exchange (ETDEWEB)

M.A. Ebadian

1999-04-30

The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

Nuclear power technology requirements for NASA exploration missions

International Nuclear Information System (INIS)

Bloomfield, H.S.

1990-01-01

This paper discusses how future exploration of the Moon and Mars will mandate developments in many areas of technology. In particular, major advances will be required in planet surface power systems and space transportation systems. Critical nuclear technology challenges that can enable strategic self-sufficiency, acceptable operational costs and cost-effective space transportation goals for NASA exploration missions have been identified. Critical technologies for surface power systems include stationary and mobile nuclear reactor and radio-isotope heat sources coupled to static and dynamic power conversion devices. These technologies can provide dramatic reductions in mass leading to operational and transportation cost savings. Critical technologies for space transportation systems include nuclear thermal rocket and nuclear electric propulsion options which present compelling concepts for significantly reducing mass, cost or travel time required for Earth-Mars transport

Improving reservoir performance using new 'smart' well technology

International Nuclear Information System (INIS)

Roggensack, W.D.; Matthews, C.M.

1997-01-01

The technologies that were available in the past to improve reservoir performance include 3-D seismic, coiled tubing, horizontal wells, and PCP's. Future enabling technologies will also include multi-lateral wells, 'smart' wells, underbalanced drilling, and downhole fluids processing. A description of 'smart' well technology was given, defined as well completions which facilitate downhole monitoring and control of production to achieve maximum reserves recovery. The current development for 'smart' wells is focused on offshore and subsea wells for marginal field development and work-over mitigation, with the emphasis in system design for production control of horizontal and multi-lateral wells. Basic 'smart' well configuration, instrumentation and monitoring systems, applications of 'smart' well technology in the Western Canadian Sedimentary Basin, and future developments and applications for the technology in general, were also discussed. 30 figs

Shippingport station decommissioning project technology transfer program

International Nuclear Information System (INIS)

McKernan, M.L.

1989-01-01

The US Department of Energy (DOE) Shippingport Station Decommissioning Project (SSDP) decontaminated and dismantled the world's first nuclear-fueled, commercial-size electric power plant. The SSDP programmatic goal direction for technology transfer is documentation of project management and operations experience. The objective is to provide future nuclear facility decommissioning projects with pertinent SSDP performance data for project assessment, planning, and operational implementation. This paper sets out access and availability directions for SSDP technology acquisition. Discusses are technology transfer definition; technology transfer products including topical and other project reports, professional-technical society presentations, other project liaison and media relations, visual documentation, and technology transfer data base; and retrieving SSDP information

Technological Competence: Training Educational Leaders.

Science.gov (United States)

Bozeman, William C.; Spuck, Dennis W.

1991-01-01

Discussion of the competence of school administrators in the use of technology focuses on the results of a survey of data processing specialists in 165 school districts that was conducted to determine the importance of various educational computer applications. It is recommended that educational applications of computers be included in preservice…

Video mediated teaching of young students in peripheral regions of the Nordic countries - a discussion of problems and potentials

DEFF Research Database (Denmark)

Andreasen, Karen Egedal

Modern labour market is characterized by high educational demands. However, the opportunities for young people living in peripheral regions of countries of meeting such demands are reduced. Modern technology and improvements of video technology widened the possibilities of providing young people...... in these areas with education and has given rise to an increase in the interest of using video mediated teaching. Recent years several experiments have been implemented in Denmark and in the Nordic countries in general. In a Danish region a comprehensive innovation project including video mediated simultaneous...... teaching at two locations was implemented in years 2008 - 2010 (Andreasen, 2012). Drawing on theory of Etienne Wenger (2004) about learning and communities of practice this article discusses results from the dialogue research related to the project. The article will discuss problems and potentials...

Microscale technologies for cell engineering

CERN Document Server

Gaharwar, Akhilesh

2016-01-01

This book offers readers cutting-edge research at the interface of polymer science and engineering, biomedical engineering, materials science, and biology. State-of-the-art developments in microscale technologies for cell engineering applications are covered, including technologies relevant to both pluripotent and adult stem cells, the immune system, and somatic cells of the animal and human origin. This book bridges the gap in the understanding of engineering biology at multiple length scale, including microenvironmental control, bioprocessing, and tissue engineering in the areas of cardiac, cartilage, skeletal, and vascular tissues, among others. This book also discusses unique, emerging areas of micropatterning and three-dimensional printing models of cellular engineering, and contributes to the better understanding of the role of biophysical factors in determining the cell fate. Microscale Technologies for Cell Engineering is valuable for bioengineers, biomaterial scientists, tissue engineers, clinicians,...

Peer Observation of Rounds Leads to Collegial Discussion of Teaching.

Science.gov (United States)

Pierce, J Rush; Rendón, Patrick; Rao, Deepti

2018-01-01

Faculty in the Division of Hospital Medicine provide most of the clinical teaching for learners at our institution. The majority of these faculty are Assistant Professors with limited formal instruction in clinical teaching. Previous Divisional strategies to improve clinical teaching ability included discussion of effective teaching behaviors, developing written expectations for teaching faculty, and instituting seminars on effective clinical teaching. Heretofore, the Division had not utilized a direct observation exercise. We developed a direct observation exercise to encourage discussion of teaching techniques and contemplation of change. Using a social learning model, we developed a peer-to-peer observation followed by a nonevaluative discussion. We created a tool for describing teaching behaviors in 5 domains that were similar to or different from the usual behavior of the observing peer: learner presentations, team leadership, bedside teaching, professionalism, and other. After the observation, the observing and observed faculty met to discuss observed teaching behaviors. Both faculty members discussed and then recorded any teaching behaviors that they planned to adopt or change. We implemented this intervention in a 22-member Academic Division of Hospital Medicine at a tertiary care medical center in the United States. A high proportion were junior faculty and graduates of our residency program. We reviewed records of 28 of 31 observations that were completed during the initial 9-month period of implementation and later surveyed faculty. The exercise resulted in planned changes in teaching behaviors that included instituting new methods to improve teaching team leadership, triaging of patients seen on rounds, faculty behaviors during oral presentations, giving real-time feedback, use of technology and humor, demonstrating physical examination findings, and modeling professional behaviors. Faculty later reported adoption of new teaching behaviors that were

A Systematic Review of Mobile Health Technology Use in Developing Countries.

Science.gov (United States)

Alghamdi, Manal; Gashgari, Horeya; Househ, Mowafa

2015-01-01

In developing countries, patients are now more informed about their healthcare options as a result of their use of mobile health (mHealth) technologies. The purpose of this paper is to describe the opportunities and challenges in using mHealth technologies for developing countries. In April 2015, Google Scholar and PubMed were searched to identify articles discussing the types, advantages and disadvantages, effectiveness, evaluation of mHealth technologies, and examples of mHealth implementation in developing countries. A total number of 3,803 articles were retrieved from both databases. Articles reporting the benefits and risks, effectiveness, and evaluation of mHealth were included. Articles that were written in English and from developing countries were also included. We excluded papers that were published before 2005, not written in English, and that were technical in nature. After screening the articles using the inclusion and exclusion criteria, 27 articles were selected for inclusion in the study. Of the 27 papers included in the review, eight described opportunities and challenges relating to mHealth, four focused on smoking cessation, three focused on weight loss, and four papers focused on chronic diseases. We also identified four articles discussing mHealth evaluation and four discussing the use of mHealth as a health promotion tool. We conclude that mHealth can improve healthcare delivery for developing countries. Some of the advantages of mHealth include: patient education, health promotion, disease self-management, decrease in healthcare costs, and remote monitoring of patients. However, there are several limitations in using mHealth technologies for developing countries, which include: interoperability, lack of evaluation standards, and lack of a technology infrastructure.

Kodak Optical Disk and Microfilm Technologies Carve Niches in Specific Applications.

Science.gov (United States)

Gallenberger, John; Batterton, John

1989-01-01

Describes the Eastman Kodak Company's microfilm and optical disk technologies and their applications. Topics discussed include WORM technology; retrieval needs and cost effective archival storage needs; engineering applications; jukeboxes; optical storage options; systems for use with mainframes and microcomputers; and possible future…

The Technological Consolidation of UNED in Spain

Directory of Open Access Journals (Sweden)

Lorenzo Garcia Aretio

2001-07-01

Full Text Available This article discusses the role of the technologies that have been utilized to advance distance teaching and learning by the National Distance Education University (Universidad Nacional de Educación a Distancia – UNED of Spain. Following a description of UNED's historical development and organizational structure, UNED's experience with various educational media is discussed. Printed teaching materials, in the form of didactic units, were one of the first methods to be utilized when UNED began its operations in 1972. In turn, the role of radio and audio recordings, television and video recordings, telephone, videoconferencing, computer systems and computer-mediated communications are also described. UNED's pioneering projects, including the virtual classroom, virtual campus, and a program for the physically handicapped, are also detailed. Recent experiments include providing access to radio and television programs on the Internet and adoption of WebCT. On the horizon for UNED are portals for cellular phones using WAP technology and gearing up for multiple applications in accordance with Universal Mobile Telecommunications Technology (UMTS.

Ultra-wideband spectral analysis using S2 technology

International Nuclear Information System (INIS)

Krishna Mohan, R.; Chang, T.; Tian, M.; Bekker, S.; Olson, A.; Ostrander, C.; Khallaayoun, A.; Dollinger, C.; Babbitt, W.R.; Cole, Z.; Reibel, R.R.; Merkel, K.D.; Sun, Y.; Cone, R.; Schlottau, F.; Wagner, K.H.

2007-01-01

This paper outlines the efforts to develop an ultra-wideband spectrum analyzer that takes advantage of the broad spectral response and fine spectral resolution (∼25 kHz) of spatial-spectral (S2) materials. The S2 material can process the full spectrum of broadband microwave transmissions, with adjustable time apertures (down to 100 μs) and fast update rates (up to 1 kHz). A cryogenically cooled Tm:YAG crystal that operates on microwave signals modulated onto a stabilized optical carrier at 793 nm is used as the core for the spectrum analyzer. Efforts to develop novel component technologies that enhance the performance of the system and meet the application requirements are discussed, including an end-to-end device model for parameter optimization. We discuss the characterization of new ultra-wide bandwidth S2 materials. Detection and post-processing module development including the implementation of a novel spectral recovery algorithm using field programmable gate array technology (FPGA) is also discussed

Ultra-wideband spectral analysis using S2 technology

Energy Technology Data Exchange (ETDEWEB)

Krishna Mohan, R. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States)]. E-mail: krishna@spectrum.montana.edu; Chang, T. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); Tian, M. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); Department of Physics, Montana State University, Bozeman, MT 59717 (United States); Bekker, S. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); Olson, A. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); Ostrander, C. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); Khallaayoun, A. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); Dollinger, C. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); Babbitt, W.R. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); Department of Physics, Montana State University, Bozeman, MT 59717 (United States); Cole, Z. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); S2 Corporation, Bozeman, MT 59718 (United States); Reibel, R.R. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); S2 Corporation, Bozeman, MT 59718 (United States); Merkel, K.D. [Spectrum Lab, Montana State University, Bozeman, MT 59717 (United States); S2 Corporation, Bozeman, MT 59718 (United States); Sun, Y. [Department of Physics, Montana State University, Bozeman, MT 59717 (United States); Cone, R. [Department of Physics, Montana State University, Bozeman, MT 59717 (United States); Schlottau, F. [University of Colorado, Boulder, CO 80309 (United States); Wagner, K.H. [University of Colorado, Boulder, CO 80309 (United States)

2007-11-15

This paper outlines the efforts to develop an ultra-wideband spectrum analyzer that takes advantage of the broad spectral response and fine spectral resolution ({approx}25 kHz) of spatial-spectral (S2) materials. The S2 material can process the full spectrum of broadband microwave transmissions, with adjustable time apertures (down to 100 {mu}s) and fast update rates (up to 1 kHz). A cryogenically cooled Tm:YAG crystal that operates on microwave signals modulated onto a stabilized optical carrier at 793 nm is used as the core for the spectrum analyzer. Efforts to develop novel component technologies that enhance the performance of the system and meet the application requirements are discussed, including an end-to-end device model for parameter optimization. We discuss the characterization of new ultra-wide bandwidth S2 materials. Detection and post-processing module development including the implementation of a novel spectral recovery algorithm using field programmable gate array technology (FPGA) is also discussed.

Half Century and Upcoming Decade of Nuclear Technology in Thailand

International Nuclear Information System (INIS)

Thailand Institute of Nuclear Technology, Bangkok

2011-06-01

Full text: The 12 t h conference on the nuclear science and technology was held on 6-7 June 2011 in Bangkok. This conference contain paper on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for the infestation tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

Siemens fuel gasification technology for the Canadian oil sands industry

Energy Technology Data Exchange (ETDEWEB)

Morehead, H. [Siemens Energy Inc., Orlando, FL (United States). IGCC and Gasification Sales and Marketing

2010-07-01

The Siemens fuel gasification (SFG) technology can be used to gasify a range of feedstocks, including petcoke, hard coal, lignite, and low-ranking fuels such as biomass and refinery residuals. The technology has recently been applied to a number of projects over the last 3 years. This paper discussed some of the issues related to the technology and it's use at a start-up facility in China. Five entrained-flow gasifiers with a thermal capacity of 500 MW are being installed at a coal gasification plant in northwestern China. The technology's use in hydrogen, steam and power production applications for the oil sands industry was also discussed. Issues related to feedstock quality, process characteristics, and equipment requirements for commercial gasifier systems were reviewed. The paper concluded by observing that improvements in gasification technology will make coal and petcoke gasification feasible options for power generation. IGCC is the most advanced and cost-effective technology for reducing emissions from coal-fired power plants. Gasification-based plants are also able to capture carbon dioxide (CO{sub 2}) for storage and sequestration. Details of the Siemens gasification test center in Germany were also included. 1 tab., 4 figs.

Combining novel monitoring tools and precision application technologies for integrated high-tech crop protection in the future (a discussion document).

Science.gov (United States)

Zijlstra, Carolien; Lund, Ivar; Justesen, Annemarie F; Nicolaisen, Mogens; Jensen, Peter Kryger; Bianciotto, Valeria; Posta, Katalin; Balestrini, Raffaella; Przetakiewicz, Anna; Czembor, Elzbieta; van de Zande, Jan

2011-06-01

The possibility of combining novel monitoring techniques and precision spraying for crop protection in the future is discussed. A generic model for an innovative crop protection system has been used as a framework. This system will be able to monitor the entire cropping system and identify the presence of relevant pests, diseases and weeds online, and will be location specific. The system will offer prevention, monitoring, interpretation and action which will be performed in a continuous way. The monitoring is divided into several parts. Planting material, seeds and soil should be monitored for prevention purposes before the growing period to avoid, for example, the introduction of disease into the field and to ensure optimal growth conditions. Data from previous growing seasons, such as the location of weeds and previous diseases, should also be included. During the growing season, the crop will be monitored at a macroscale level until a location that needs special attention is identified. If relevant, this area will be monitored more intensively at a microscale level. A decision engine will analyse the data and offer advice on how to control the detected diseases, pests and weeds, using precision spray techniques or alternative measures. The goal is to provide tools that are able to produce high-quality products with the minimal use of conventional plant protection products. This review describes the technologies that can be used or that need further development in order to achieve this goal. Copyright © 2011 Society of Chemical Industry.

Working around technologies

DEFF Research Database (Denmark)

Dupret, Katia

2017-01-01

in Denmark. The aim and contribution of the study is twofold. First, it attempts to revitalise the discussion on technology workaround strategies as responsible professionalism. Second, it will direct attention to and contribute to an understanding of how the normativity embedded in technological development...... expressions of professionals’ active encounter with the complexity of work situations, and can therefore be important signs of professional ethical judgement. Drawing on science and technology studies and the concept of invisible work, the study discusses workaround situations that arise in health care work......This study discusses how professionalism and work ethics influence how health care professionals work around new technologies. When people avoid using technologies, they are not necessarily ceasing to engage in their work activities. The workaround strategies presented here are rather practical...

Fourteenth National Industrial Energy Technology Conference: Proceedings

International Nuclear Information System (INIS)

1992-01-01

Presented are many short articles on various aspects of energy production, use, and conservation in industry. The impacts of energy efficient equipment, recycling, pollution regulations, and energy auditing are discussed. The topics covered include: New generation sources and transmission issues, superconductivity applications, integrated resource planning, electro technology research, equipment and process improvement, environmental improvement, electric utility management, and recent European technology and conservation opportunities. Individual papers are indexed separately

Energy technology review, July--August 1991

Energy Technology Data Exchange (ETDEWEB)

Johnson, K.C. (ed.)

1991-01-01

This issue of Energy Technology Review'' gives the annual review of the programs at Lawrence Livermore National Laboratory. This State of the Laboratory issue includes discussions of all major programs: Defense Systems; Laser Research; Magnetic Fusion Energy; Energy and Earth Sciences; Environmental Technology Program; Biomedical and Environmental Science; Engineering; Physics; Chemistry and Materials Science; Computations; and Administrative and Institutional Services. An index is also given of the 1991 achievements with contact names and telephone number.

The Role of Universities in Technology Entrepreneurship

Directory of Open Access Journals (Sweden)

Jonathan Wells

2012-04-01

Full Text Available This article discusses the role that universities play in the process of technology entrepreneurship, where entrepreneurship is restricted to the process of launching and supporting small and medium-sized technology-based businesses. The article briefly discusses a few of the issues that influence a university’s participation in the process of entrepreneurship. Although there is no “one-size-fits-all” model, the article discusses various ways that Canadian universities may help entrepreneurs, including contract research, the provision of business parks, and sensible handling of intellectual property issues. Finally, the article suggests that the return on “investment”, for both the university and the province, is a difficult thing to measure – nevertheless, participation in the entrepreneurship process may result in some tangible and intangible benefits for both parties.

Planning for, and measuring, the business value of technology projects in the oil sands

Energy Technology Data Exchange (ETDEWEB)

Sayed, M. [Northern Alberta Inst. of Technology, Edmonton, AB (Canada); Burgess, A. [Telus Energy Sector Organization, Calgary, AB (Canada)

2007-07-01

This presentation discussed new communications technology options developed for oil sands industry operators. Technology options included broadband access for data, video and voice requirements, as well as new options for video, audio, and web conferencing. Recent technology options for inter-camp communications were presented, as well as new software developments for distance education, video surveillance, and data security. Various entertainment technologies for oil sands camp employees included in-room telephones, internet and gaming access, radio, television, and family web-cams. New electronic permitting equipment was described, and details of security and verification cards and tickets were provided. The economic benefits and social advantages of adopting the technologies were discussed. A research project and assessment tool designed to predict and measure the business value of information technology (IT) and communications technologies and projects was outlined. A case study of the Schlumberger heavy equipment program was used to demonstrate the assessment tool. refs., tabs., figs.

A survey of contemporary enterprise storage technologies from a digital forensics perspective

Directory of Open Access Journals (Sweden)

Gregory H. Carlton

2011-09-01

Full Text Available As the proliferation of digital computational systems continue to expand, increasingly complex technologies emerge, including those regarding large, enterprise-wide, information storage and retrieval systems. Within this study, we examine four contemporary enterprise storage technologies. Our examination of these technologies is presented with an overview of the technological features of each offering and then followed with a discussion of the impact of these technologies on digital forensics methods, particularly regarding forensic data acquisition. We offer a general opinion concerning a recommended data acquisition method when faced with the task of obtaining a forensic image of data contained within these technologies, we discuss limitations of our study, and lastly, we suggest areas in which additional research would benefit the field of digital forensics.

Technology Roadmapping for Waste Management

International Nuclear Information System (INIS)

Bray, O.

2003-01-01

Technology roadmapping can be an effective strategic technology planning tool. This paper describes a process for customizing a generic technology roadmapping process. Starting with a generic process reduces the learning curve and speeds up the roadmap development. Similarly, starting with a generic domain model provides leverage across multiple applications or situations within the domain. A process that combines these two approaches facilitates identifying technology gaps and determining common core technologies that can be reused for multiple applications or situations within the domain. This paper describes both of these processes and how they can be integrated. A core team and a number of technology working groups develop the technology roadmap, which includes critical system requirements and targets, technology areas and metrics for each area, and identifies and evaluates possible technology alternatives to recommend the most appropriate ones to pursue. A generalized waste management model, generated by considering multiple situations or applications in terms of a generic waste management model, provides the domain requirements for the technology roadmapping process. Finally, the paper discusses lessons learns from a number of roadmapping projects

Ten Timeless Tips for Keeping on Top of Teaching Technology

Science.gov (United States)

Poling, Devereaux A.; LoSchiavo, Frank M.

2014-01-01

We provide tips for helping psychology faculty effectively seek, select, and place new technology into pedagogical practice. We also provide tips to help psychology departments position themselves for a future that includes teaching technologies that have not yet been created. Instead of discussing today's top innovations in teaching (which…

Ethical considerations regarding the implementation of new technologies and techniques in surgery.

Science.gov (United States)

Strong, Vivian E; Forde, Kenneth A; MacFadyen, Bruce V; Mellinger, John D; Crookes, Peter F; Sillin, Lelan F; Shadduck, Phillip P

2014-08-01

Ethical considerations relevant to the implementation of new surgical technologies and techniques are explored and discussed in practical terms in this statement, including (1) How is the safety of a new technology or technique ensured?; (2) What are the timing and process by which a new technology or technique is implemented at a hospital?; (3) How are patients informed before undergoing a new technology or technique?; (4) How are surgeons trained and credentialed in a new technology or technique?; (5) How are the outcomes of a new technology or technique tracked and evaluated?; and (6) How are the responsibilities to individual patients and society at large balanced? The following discussion is presented with the intent to encourage thought and dialogue about ethical considerations relevant to the implementation of new technologies and new techniques in surgery.

Sensor Technologies for Intelligent Transportation Systems.

Science.gov (United States)

Guerrero-Ibáñez, Juan; Zeadally, Sherali; Contreras-Castillo, Juan

2018-04-16

Modern society faces serious problems with transportation systems, including but not limited to traffic congestion, safety, and pollution. Information communication technologies have gained increasing attention and importance in modern transportation systems. Automotive manufacturers are developing in-vehicle sensors and their applications in different areas including safety, traffic management, and infotainment. Government institutions are implementing roadside infrastructures such as cameras and sensors to collect data about environmental and traffic conditions. By seamlessly integrating vehicles and sensing devices, their sensing and communication capabilities can be leveraged to achieve smart and intelligent transportation systems. We discuss how sensor technology can be integrated with the transportation infrastructure to achieve a sustainable Intelligent Transportation System (ITS) and how safety, traffic control and infotainment applications can benefit from multiple sensors deployed in different elements of an ITS. Finally, we discuss some of the challenges that need to be addressed to enable a fully operational and cooperative ITS environment.

Sensor Technologies for Intelligent Transportation Systems

Science.gov (United States)

Guerrero-Ibáñez, Juan; Zeadally, Sherali

2018-01-01

Modern society faces serious problems with transportation systems, including but not limited to traffic congestion, safety, and pollution. Information communication technologies have gained increasing attention and importance in modern transportation systems. Automotive manufacturers are developing in-vehicle sensors and their applications in different areas including safety, traffic management, and infotainment. Government institutions are implementing roadside infrastructures such as cameras and sensors to collect data about environmental and traffic conditions. By seamlessly integrating vehicles and sensing devices, their sensing and communication capabilities can be leveraged to achieve smart and intelligent transportation systems. We discuss how sensor technology can be integrated with the transportation infrastructure to achieve a sustainable Intelligent Transportation System (ITS) and how safety, traffic control and infotainment applications can benefit from multiple sensors deployed in different elements of an ITS. Finally, we discuss some of the challenges that need to be addressed to enable a fully operational and cooperative ITS environment. PMID:29659524

Sensor Technologies for Intelligent Transportation Systems

Directory of Open Access Journals (Sweden)

Juan Guerrero-Ibáñez

2018-04-01

Full Text Available Modern society faces serious problems with transportation systems, including but not limited to traffic congestion, safety, and pollution. Information communication technologies have gained increasing attention and importance in modern transportation systems. Automotive manufacturers are developing in-vehicle sensors and their applications in different areas including safety, traffic management, and infotainment. Government institutions are implementing roadside infrastructures such as cameras and sensors to collect data about environmental and traffic conditions. By seamlessly integrating vehicles and sensing devices, their sensing and communication capabilities can be leveraged to achieve smart and intelligent transportation systems. We discuss how sensor technology can be integrated with the transportation infrastructure to achieve a sustainable Intelligent Transportation System (ITS and how safety, traffic control and infotainment applications can benefit from multiple sensors deployed in different elements of an ITS. Finally, we discuss some of the challenges that need to be addressed to enable a fully operational and cooperative ITS environment.

The great downside dilemma for risky emerging technologies

International Nuclear Information System (INIS)

Baum, Seth D

2014-01-01

Some emerging technologies promise to significantly improve the human condition, but come with a risk of failure so catastrophic that human civilization may not survive. This article discusses the great downside dilemma posed by the decision of whether or not to use these technologies. The dilemma is: use the technology, and risk the downside of catastrophic failure, or do not use the technology, and suffer through life without it. Historical precedents include the first nuclear weapon test and messaging to extraterrestrial intelligence. Contemporary examples include stratospheric geoengineering, a technology under development in response to global warming, and artificial general intelligence, a technology that could even take over the world. How the dilemma should be resolved depends on the details of each technology’s downside risk and on what the human condition would otherwise be. Meanwhile, other technologies do not pose this dilemma, including sustainable design technologies, nuclear fusion power, and space colonization. Decisions on all of these technologies should be made with the long-term interests of human civilization in mind. This paper is part of a series of papers based on presentations at the Emerging Technologies and the Future of Humanity event held at the Royal Swedish Academy of Sciences on 17 March 2014. (invited comment)

A comparative assessment of the economics of plutonium disposition including comparison with other nuclear fuel cycles

International Nuclear Information System (INIS)

Williams, K.A.; Miller, J.W.; Reid, R.L.

1997-01-01

DOE has been evaluating three technologies for the disposition of approximately 50 metric tons of surplus plutonium from defense-related programs: reactors, immobilization, and deep boreholes. As part of the process supporting an early CY 1997 Record of Decision (ROD), a comprehensive assessment of technical viability, cost, and schedule has been conducted. Oak Ridge National Laboratory has managed and coordinated the life-cycle cost (LCC) assessment effort for this program. This paper discusses the economic analysis methodology and the results prior to ROD. Other objectives of the paper are to discuss major technical and economic issues that impact plutonium disposition cost and schedule. Also to compare the economics of a once-through weapons-derived MOX nuclear fuel cycle to other fuel cycles, such as those utilizing spent fuel reprocessing. To evaluate the economics of these technologies on an equitable basis, a set of cost estimating guidelines and a common cost-estimating format were utilized by all three technology teams. This paper also includes the major economic analysis assumptions and the comparative constant-dollar and discounted-dollar LCCs

Radiation effects in advanced microelectronics technologies

Science.gov (United States)

Johnston, A. H.

1998-06-01

The pace of device scaling has increased rapidly in recent years. Experimental CMOS devices have been produced with feature sizes below 0.1 /spl mu/m, demonstrating that devices with feature sizes between 0.1 and 0.25 /spl mu/m will likely be available in mainstream technologies after the year 2000. This paper discusses how the anticipated changes in device dimensions and design are likely to affect their radiation response in space environments. Traditional problems, such as total dose effects, SEU and latchup are discussed, along with new phenomena. The latter include hard errors from heavy ions (microdose and gate-rupture errors), and complex failure modes related to advanced circuit architecture. The main focus of the paper is on commercial devices, which are displacing hardened device technologies in many space applications. However, the impact of device scaling on hardened devices is also discussed.

Radiation-hardened bulk CMOS technology

International Nuclear Information System (INIS)

Dawes, W.R. Jr.; Habing, D.H.

1979-01-01

The evolutionary development of a radiation-hardened bulk CMOS technology is reviewed. The metal gate hardened CMOS status is summarized, including both radiation and reliability data. The development of a radiation-hardened bulk silicon gate process which was successfully implemented to a commercial microprocessor family and applied to a new, radiation-hardened, LSI standard cell family is also discussed. The cell family is reviewed and preliminary characterization data is presented. Finally, a brief comparison of the various radiation-hardened technologies with regard to performance, reliability, and availability is made

Commercial aircraft composite technology

CERN Document Server

Breuer, Ulf Paul

2016-01-01

This book is based on lectures held at the faculty of mechanical engineering at the Technical University of Kaiserslautern. The focus is on the central theme of societies overall aircraft requirements to specific material requirements and highlights the most important advantages and challenges of carbon fiber reinforced plastics (CFRP) compared to conventional materials. As it is fundamental to decide on the right material at the right place early on the main activities and milestones of the development and certification process and the systematic of defining clear requirements are discussed. The process of material qualification - verifying material requirements is explained in detail. All state-of-the-art composite manufacturing technologies are described, including changes and complemented by examples, and their improvement potential for future applications is discussed. Tangible case studies of high lift and wing structures emphasize the specific advantages and challenges of composite technology. Finally,...

Electrical Actuation Technology Bridging

Science.gov (United States)

Hammond, Monica (Compiler); Sharkey, John (Compiler)

1993-01-01

This document contains the proceedings of the NASA Electrical Actuation Technology Bridging (ELA-TB) Workshop held in Huntsville, Alabama, September 29-October 1, 1992. The workshop was sponsored by the NASA Office of Space Systems Development and Marshall Space Flight Center (MSFC). The workshop addressed key technologies bridging the entire field of electrical actuation including systems methodology, control electronics, power source systems, reliability, maintainability, and vehicle health management with special emphasis on thrust vector control (TVC) applications on NASA launch vehicles. Speakers were drawn primarily from industry with participation from universities and government. In addition, prototype hardware demonstrations were held at the MSFC Propulsion Laboratory each afternoon. Splinter sessions held on the final day afforded the opportunity to discuss key issues and to provide overall recommendations. Presentations are included in this document.

Consider the Four-Legged Stool as You Plan for Information Technology.

Science.gov (United States)

Baltzer, Jan A.

2000-01-01

Discusses the need for strategic planning in libraries for the use of information technology that will add value to the library and better serve the users. Explains a model for developing information technology strategic plans that includes vision statements, goals and strategies, and an implementation timeline. (LRW)

Technological Minimalism: A Cost-Effective Alternative for Course Design and Development.

Science.gov (United States)

Lorenzo, George

2001-01-01

Discusses the use of minimum levels of technology, or technological minimalism, for Web-based multimedia course content. Highlights include cost effectiveness; problems with video streaming, the use of XML for Web pages, and Flash and Java applets; listservs instead of proprietary software; and proper faculty training. (LRW)

The keyhole GTAW technology: a new welding technology joining quality and productivity

International Nuclear Information System (INIS)

Le Port, P.; Laugier, M.; Scandella, F.; Lawrjaniec, D.; Boucher, Ch.

2006-01-01

This paper is a literature review regarding the keyhole GTAW technology, which has been developed and first used for industrial applications in Australia. The process enables single pass welding of a wide range of materials including stainless steels, titanium and nickel alloys, up to 12 mm thick. Process parameters (welding current, arc voltage, travel speed, the type of shielding gas and tungsten electrode dimensions) are discussed with regards to keyhole formation and stability. A comparison between standard GTAW and keyhole GTAW is provided for the welding of 12 mm thick stainless steel and titanium, showing the substantial increase in productivity that can be achieved with this new technology. Institut de Soudure has taken part in a European project aimed at assessing the possibilities of the keyhole GTAW technology. (authors)

Overview of CT technologies for children

Energy Technology Data Exchange (ETDEWEB)

Frush, Donald P. [Duke University Medical Center, Department of Radiology, Box 3808, Durham, NC (United States)

2014-10-15

Many technical advances in CT have reduced radiation exposure in children and adults. These advances in technology should be used in conjunction with CT techniques such as appropriate patient preparation and intravenous contrast media administration to maximize dose management and image quality. This article summarizes current dose reduction technologies for pediatric CT, noting ranges of dose reduction as well as potential limitations. Discussion includes some of the elusive aspects of assessing image quality and the need for developing personalized CT. (orig.)

Overview of CT technologies for children

International Nuclear Information System (INIS)

Frush, Donald P.

2014-01-01

Many technical advances in CT have reduced radiation exposure in children and adults. These advances in technology should be used in conjunction with CT techniques such as appropriate patient preparation and intravenous contrast media administration to maximize dose management and image quality. This article summarizes current dose reduction technologies for pediatric CT, noting ranges of dose reduction as well as potential limitations. Discussion includes some of the elusive aspects of assessing image quality and the need for developing personalized CT. (orig.)

75 FR 60141 - International Business Machines (IBM), Global Technology Services Delivery Division, Including On...

Science.gov (United States)

2010-09-29

... 25, 2010, applicable to workers of International Business Machines (IBM), Global Technology Services... hereby issued as follows: All workers of International Business Machines (IBM), Global Technology... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,164] International Business...

Proceedings of the fuels technology contractors review meeting

Energy Technology Data Exchange (ETDEWEB)

Malone, R.D. [ed.

1993-11-01

The Fuels Technology Contractors Review Meeting was held November 16-18, 1993, at the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. This meeting was sponsored and hosted by METC, the Office of Fossil Energy, U.S. Department of Energy (DOE). METC periodically provides an opportunity to bring together all of the R&D participants in a DOE-sponsored contractors review meeting to present key results of their research and to provide technology transfer to the active research community and to the interested public. This meeting was previously called the Natural Gas Technology Contractors Review Meeting. This year it was expanded to include DOE-sponsored research on oil shale and tar sands and so was retitled the Fuels Technology Contractors Review Meeting. Current research activities include efforts in both natural gas and liquid fuels. The natural gas portion of the meeting included discussions of results summarizing work being conducted in fracture systems, both natural and induced; drilling, completion, and stimulation research; resource characterization; delivery and storage; gas to liquids research; and environmental issues. The meeting also included project and technology summaries on research in oil shale, tar sands, and mild coal gasification, and summaries of work in natural-gas fuel cells and natural-gas turbines. The format included oral and poster session presentations. Individual papers have been processed separately for inclusion in the Energy Science and Technology database.

Social capital and technological literacy in Taiwan.

Science.gov (United States)

Yang, Hsieh-Hua; Huang, Fen Fen; Lai, Yi-Horng; Yang, Hung-Jen; Yu, Jui-Chen

2012-01-01

The burgeoning interest in social capital within the technology community represents a welcome move towards a concern for the social elements of technological adaptation and capacity. Since technology plays an ever larger role in our daily life, it is necessary to articulate social capital and its relationship to technological literacy. A nationwide data was collected by area sampling, and position generator was used to measure social capital. Regression model was constructed for technological literacy. Age, gender, education, income, web access, and social capital were included as independent variables. The results show that age, gender, education, web access, and social capital were good predictors of technological literacy. It is concluded that social capital is helpful in coping with rapid technological change. Theoretical and empirical implications and future research are discussed.

Wind Energy Conversion Systems Technology and Trends

CERN Document Server

2012-01-01

Wind Energy Conversion System covers the technological progress of wind energy conversion systems, along with potential future trends. It includes recently developed wind energy conversion systems such as multi-converter operation of variable-speed wind generators, lightning protection schemes, voltage flicker mitigation and prediction schemes for advanced control of wind generators. Modeling and control strategies of variable speed wind generators are discussed, together with the frequency converter topologies suitable for grid integration. Wind Energy Conversion System also describes offshore farm technologies including multi-terminal topology and space-based wind observation schemes, as well as both AC and DC based wind farm topologies. The stability and reliability of wind farms are discussed, and grid integration issues are examined in the context of the most recent industry guidelines. Wind power smoothing, one of the big challenges for transmission system operators, is a particular focus. Fault ride th...

Technology assessment of wind energy conversion systems

Energy Technology Data Exchange (ETDEWEB)

Meier, B. W.; Merson, T. J.

1980-09-01

Environmental data for wind energy conversion systems (WECSs) have been generated in support of the Technology Assessment of Solar Energy (TASE) program. Two candidates have been chosen to characterize the WECS that might be deployed if this technology makes a significant contribution to the national energy requirements. One WECS is a large machine of 1.5-MW-rated capacity that can be used by utilities. The other WECS is a small machine that is characteristic of units that might be used to meet residential or small business energy requirements. Energy storage systems are discussed for each machine to address the intermittent nature of wind power. Many types of WECSs are being studied and a brief review of the technology is included to give background for choosing horizontal axis designs for this study. Cost estimates have been made for both large and small systems as required for input to the Strategic Environmental Assessment Simulation (SEAS) computer program. Material requirements, based on current generation WECSs, are discussed and a general discussion of environmental impacts associated with WECS deployment is presented.

Technology of surface wastewater purification, including high-rise construction areas

Science.gov (United States)

Tsyba, Anna; Skolubovich, Yury

2018-03-01

Despite on the improvements in the quality of high-rise construction areas and industrial wastewater treatment, the pollution of water bodies continues to increase. This is due to the organized and unorganized surface untreated sewage entry into the reservoirs. The qualitative analysis of some cities' surface sewage composition is carried out in the work. Based on the published literature review, the characteristic contamination present in surface wastewater was identified. The paper proposes a new technology for the treatment of surface sewage and presents the results of preliminary studies.

Handbook of Visual Display Technology

CERN Document Server

Cranton, Wayne; Fihn, Mark

2012-01-01

The Handbook of Visual Display Technology is a unique work offering a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. An invaluable compilation of information, the Handbook will serve as a single reference source with expert contributions from over 150 international display professionals and academic researchers. All classes of display device are covered including LCDs, reflective displays, flexible solutions and emissive devices such as OLEDs and plasma displays, with discussion of established principles, emergent technologies, and particular areas of application. The wide-ranging content also encompasses the fundamental science of light and vision, image manipulation, core materials and processing techniques, display driving and metrology.

AFSPC Innovation and Science and Technology Outreach to Industry and Academia

Science.gov (United States)

Sanchez, Merri J.; Dills, Anthony N.; Chandler, Faith

2016-01-01

The U.S. Air Force is taking a strategic approach to ensuring that we are at the cutting edge of science and technology. This includes fostering game-changing approaches and technologies that are balanced with operational needs. The security of the Nation requires a constant pursuit of science, technical agility, and a rapid adoption of innovation. This includes pursuits of game-changing technologies and domains that perhaps we cannot even imagine today. This paper highlights the Air Force Space Command (AFSPC) collaboration and outreach to other government agencies, military and national laboratories, industry, and academia on long term science and technology challenges. In particular we discuss the development of the AFSPC Long Term Science and Technology Challenges that include both space and cyberspace operations within a multi-domain environment and the subsequent Innovation Summits.

RF and microwave integrated circuit development technology, packaging and testing

CERN Document Server

Gamand, Patrice; Kelma, Christophe

2018-01-01

RF and Microwave Integrated Circuit Development bridges the gap between existing literature, which focus mainly on the 'front-end' part of a product development (system, architecture, design techniques), by providing the reader with an insight into the 'back-end' part of product development. In addition, the authors provide practical answers and solutions regarding the choice of technology, the packaging solutions and the effects on the performance on the circuit and to the industrial testing strategy. It will also discuss future trends and challenges and includes case studies to illustrate examples. * Offers an overview of the challenges in RF/microwave product design * Provides practical answers to packaging issues and evaluates its effect on the performance of the circuit * Includes industrial testing strategies * Examines relevant RF MIC technologies and the factors which affect the choice of technology for a particular application, e.g. technical performance and cost * Discusses future trends and challen...

Discussion on Papers 5 - 7

International Nuclear Information System (INIS)

Strongman, C.P.; Jones, R.; Moorhead, H.

1992-01-01

The topics raised in discussion included: the performance of the generator sets; the movement of sediments and the effect on beach levels; monitoring near-bed sediments; the erosion of barrage materials by suspended solids; sediment transport models; the accuracy of hydrographic and other surveys; the relative ornithological importance of the estuary with respect to others in the United Kingdom. Separate abstracts were prepared for each of the three papers under discussion. (UK)

Advances in solid state laser technology for space and medical applications

Science.gov (United States)

Byvik, C. E.; Buoncristiani, A. M.

1988-01-01

Recent developments in laser technology and their potential for medical applications are discussed. Gas discharge lasers, dye lasers, excimer lasers, Nd:YAG lasers, HF and DF lasers, and other commonly used lasers are briefly addressed. Emerging laser technology is examined, including diode-pumped lasers and other solid state lasers.

Blockchain distributed ledger technologies for biomedical and health care applications.

Science.gov (United States)

Kuo, Tsung-Ting; Kim, Hyeon-Eui; Ohno-Machado, Lucila

2017-11-01

To introduce blockchain technologies, including their benefits, pitfalls, and the latest applications, to the biomedical and health care domains. Biomedical and health care informatics researchers who would like to learn about blockchain technologies and their applications in the biomedical/health care domains. The covered topics include: (1) introduction to the famous Bitcoin crypto-currency and the underlying blockchain technology; (2) features of blockchain; (3) review of alternative blockchain technologies; (4) emerging nonfinancial distributed ledger technologies and applications; (5) benefits of blockchain for biomedical/health care applications when compared to traditional distributed databases; (6) overview of the latest biomedical/health care applications of blockchain technologies; and (7) discussion of the potential challenges and proposed solutions of adopting blockchain technologies in biomedical/health care domains. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association.

Technology Directions for the 21st Century. Vol. 2

Science.gov (United States)

Crimi, Giles F.; Verheggen, Henry; Malinowski, John; Malinowski, Robert; Botta, Robert

1996-01-01

The Office of Space Communications (OSC) is tasked by NASA to conduct a planning process to meet NASA's science mission and other communications and data processing requirements. A set of technology trend studies was undertaken by Science Applications International Corporation (SAIC) for OSC to identify quantitative data that can be used to predict performance of electronic equipment in the future to assist in the planning process. Only commercially available, off-the-shelf technology was included. For each technology area considered, the current state of the technology is discussed, future applications that could benefit from use of the technology are identified, and likely future developments of the technology are described. The impact of each technology area on NASA operations is presented together with a discussion of the feasibility and risk associated with its development. An approximate timeline is given for the next 15 to 25 years to indicate the anticipated evolution of capabilities within each of the technology areas considered. This volume contains four chapters: one each on technology trends for database systems, computer software, neural and fuzzy systems, and artificial intelligence. The principal study results are summarized at the beginning of each chapter.

Technology in a crisis of confidence

Energy Technology Data Exchange (ETDEWEB)

Damodaran, G R

1979-04-01

The power that technological progress has given to engineers is examined to see if there has been a corresponding growth in human happiness. A credit/debit approach is discussed, whereby technological advancement is measured against the criteria of social good. The credit side includes medicine, agriculture, and energy use, while the debit side lists pollution, unequal distribution of technology and welfare, modern weaponry, resource depletion, and a possible decline in the quality of life. The present anti-technologists claim the debit side is now predominant, but the author challenges this position by examining the role of technology and the engineer in the society. He sees a need for renewed self-confidence and a sense of direction among engineers, but is generally optimistic that technology and civilization will continue to be intertwined. (DCK)

Discussion on the correlation between geophysical and remote sensing information. Primary study on information correlation of research content and concept of post-remote sensing application technology for uranium exploration

International Nuclear Information System (INIS)

Ye Fawang; Liu Dechang

2005-01-01

Based on the research content of post-remote sensing application technology for uranium exploration, a preliminary discussion on the correlation between RS information and geophysical information from gravity, aero-magnetics, aero-radioactivity is made on five aspects: physical meaning, depth of geological rule meaning, time and phase, planar pattern and inter-reaction mechanism. It creates a good beginner for deeply studying the correlation in quality and quantity between RS information from post-remote sensing application technology and other geologic information. (authors)

Bringing solutions to big challenges. Energy - climate - technology (ECT)

International Nuclear Information System (INIS)

2008-01-01

The conference contains 45 presentations within the sections integrated policy and strategic perspectives on energy, climate change and technology, energy efficiency with prospects and measures, climate change and challenges for offshore energy and technology, possibilities for technology utilization, nuclear technology developments including some papers on thorium utilization, ethics of energy resource use and climate change, challenges and possibilities for the Western Norway and sustainability and security in an ECT-context. Some economic aspects are discussed as well. 16 of the 45 papers have been indexed for the database (tk)

ATLes: the strategic application of Web-based technology to address learning objectives and enhance classroom discussion in a veterinary pathology course.

Science.gov (United States)

Hines, Stephen A; Collins, Peggy L; Quitadamo, Ian J; Brahler, C Jayne; Knudson, Cameron D; Crouch, Gregory J

2005-01-01

A case-based program called ATLes (Adaptive Teaching and Learning Environments) was designed for use in a systemic pathology course and implemented over a four-year period. Second-year veterinary students working in small collaborative learning groups used the program prior to their weekly pathology laboratory. The goals of ATLes were to better address specific learning objectives in the course (notably the appreciation of pathophysiology), to solve previously identified problems associated with information overload and information sorting that commonly occur as part of discovery-based processes, and to enhance classroom discussion. The program was also designed to model and allow students to practice the problem-oriented approach to clinical cases, thereby enabling them to study pathology in a relevant clinical context. Features included opportunities for students to obtain additional information on the case by requesting specific laboratory tests and/or diagnostic procedures. However, students were also required to justify their diagnostic plans and to provide mechanistic analyses. The use of ATLes met most of these objectives. Student acceptance was high, and students favorably reviewed the online ''Content Links'' that made useful information more readily accessible and level appropriate. Students came to the lab better prepared to engage in an in-depth and high-quality discussion and were better able to connect clinical problems to underlying changes in tissue (lesions). However, many students indicated that the required time on task prior to lab might have been excessive relative to what they thought they learned. The classroom discussion, although improved, was not elevated to the expected level-most likely reflecting other missing elements of the learning environment, including the existing student culture and the students' current discussion skills. This article briefly discusses the lessons learned from ATLes and how similar case-based exercises might be

Decontamination and decommissioning focus area. Technology summary

International Nuclear Information System (INIS)

1995-06-01

This report presents details of the facility deactivation, decommissioning, and material disposition research for development of new technologies sponsored by the Department of Energy. Topics discussed include; occupational safety, radiation protection, decontamination, remote operated equipment, mixed waste processing, recycling contaminated metals, and business opportunities

THE USE OF FACEBOOK FOR ONLINE DISCUSSIONS AMONG DISTANCE LEARNERS

Directory of Open Access Journals (Sweden)

Tina LIM

2010-10-01

Full Text Available With the advent of Web 2.0 tools, educators are looking to these new technological tools to examine its potential in enhancing teaching and learning. While its runaway success as a social networking tool is now renowned, the use of Facebook for educational purposes may be considered still at its infancy stage. This paper describes the use of Facebook as a platform for academic discussions among distance learners. It offers a glimpse into how mobile learning via SMS together with Facebook was used to support and enhance the blended learning approach at Open University Malaysia for three courses: Learning Skills for Open and Distance Learners, Company Law and Renal Nursing. Data on user interactions collected were from the “Page Insights” tools available to Page administrators for the whole duration of a course semester. Facebook interactions examined include total number of fans, total interactions, interactions per post, post quality and unique page views. Findings indicate that Facebook does have the potential to draw distance learners to engage in meaningful academic conversations but the quantity and quality of posts very much depends on the timing as well as the topics of discussion.

Biometric Technologies and Verification Systems

CERN Document Server

Vacca, John R

2007-01-01

Biometric Technologies and Verification Systems is organized into nine parts composed of 30 chapters, including an extensive glossary of biometric terms and acronyms. It discusses the current state-of-the-art in biometric verification/authentication, identification and system design principles. It also provides a step-by-step discussion of how biometrics works; how biometric data in human beings can be collected and analyzed in a number of ways; how biometrics are currently being used as a method of personal identification in which people are recognized by their own unique corporal or behavior

Clean coal technology challenges for China

Energy Technology Data Exchange (ETDEWEB)

Mao, J. [Tsinghua University, Beijing (China). Dept. of Thermal Engineering

2001-01-01

China is rich in coal reserves and also the largest coal producer and consumer in the world. Coal constitutes over 70% of the total energy consumption, some 86% of coal production is burned directly, which causes serious air pollution problems. However, based on China's specific energy structure, coal utilisation will remain the dominant means of energy usage and clean coal technology must be the way forward if the environmental problems are to be resolved. This article discusses China's Clean Coal Technology Program, its implementation, including the clean coal technologies being developed and introduced, with reference to the key R & D institutes for each of the coal-using sectors. The article is an edited version of the 2000 Robens Coal Science Lecture, delivered in London in October 2000. The China Coal Technology Program for the 9th Five-Year Plan (1996-2000) was approved in 1997. The technologies included in the Program considered in this article are in: coal washing and grading, coal briquette, coal water slurry; circulating fluidised bed technology; pressurised fluidised bed combined cycle; integrated gasification combined cycle; coal gasification, coal liquefaction and flue gas desulfurisation. 4 tabs.

Legal and social concerns to the development of bioremediation technologies

Energy Technology Data Exchange (ETDEWEB)

Bilyard, G.R.; McCabe, G.H.; White, K.A.; Gajewski, S.W.; Hendrickson, P.L.; Jaksch, J.A.; Kirwan-Taylor, H.A.; McKinney, M.D.

1996-09-01

The social and legal framework within which bioremediation technologies must be researched, developed, and deployed in the US are discussed in this report. Discussions focus on policies, laws and regulations, intellectual property, technology transfer, and stakeholder concerns. These discussions are intended to help program managers, scientists and engineers understand the social and legal framework within which they work, and be cognizant of relevant issues that must be navigated during bioremediation technology research, development, and deployment activities. While this report focuses on the legal and social environment within which the DOE operates, the laws, regulations and social processes could apply to DoD and other sites nationwide. This report identifies specific issues related to bioremediation technologies, including those involving the use of plants; native, naturally occurring microbes; non-native, naturally occurring microbes; genetically engineered organisms; and microbial products (e.g., enzymes, surfactants, chelating compounds). It considers issues that fall within the following general categories: US biotechnology policy and the regulation of field releases of organisms; US environmental laws and waste cleanup regulations; intellectual property and patenting issues; technology transfer procedures for commercializing technology developed through government-funded research; stakeholder concerns about bioremediation proposals; and methods for assuring public involvement in technology development and deployment.

Legal and social concerns to the development of bioremediation technologies

International Nuclear Information System (INIS)

Bilyard, G.R.; McCabe, G.H.; White, K.A.; Gajewski, S.W.; Hendrickson, P.L.; Jaksch, J.A.; Kirwan-Taylor, H.A.; McKinney, M.D.

1996-09-01

The social and legal framework within which bioremediation technologies must be researched, developed, and deployed in the US are discussed in this report. Discussions focus on policies, laws and regulations, intellectual property, technology transfer, and stakeholder concerns. These discussions are intended to help program managers, scientists and engineers understand the social and legal framework within which they work, and be cognizant of relevant issues that must be navigated during bioremediation technology research, development, and deployment activities. While this report focuses on the legal and social environment within which the DOE operates, the laws, regulations and social processes could apply to DoD and other sites nationwide. This report identifies specific issues related to bioremediation technologies, including those involving the use of plants; native, naturally occurring microbes; non-native, naturally occurring microbes; genetically engineered organisms; and microbial products (e.g., enzymes, surfactants, chelating compounds). It considers issues that fall within the following general categories: US biotechnology policy and the regulation of field releases of organisms; US environmental laws and waste cleanup regulations; intellectual property and patenting issues; technology transfer procedures for commercializing technology developed through government-funded research; stakeholder concerns about bioremediation proposals; and methods for assuring public involvement in technology development and deployment

Teachers of the 21st Century Know the What, Why, and How of Technology Integration.

Science.gov (United States)

Dockstader, Jolene

1999-01-01

Discusses the integration of technology into elementary and secondary school classrooms based on experiences at the Jerome Joint School District (Idaho). Topics include having the curriculum drive technology use, student motivation, student computer literacy, relating technology skills to content areas and classroom assignments, and incorporating…

Technologies options for acid-rain control. Book chapter

International Nuclear Information System (INIS)

Princiotta, F.T.

1992-01-01

The report discusses acid rain control options available to the electric utility industry. They include coal switching, flue gas desulfurization, and such emerging lower cost technologies as Limestone Injection Multistage Burners (LIMB) and Advanced Silicate (ADVACATE), both developed by EPA, selective use of gas to reduce nitrogen oxides (NOx) and sulfur dioxide (SO2) in coal-fired boilers, and the use of Integrated Coal Gasification Combined Cycle (IGCC) technology

Round table discussion during session 2

International Nuclear Information System (INIS)

Mays, C.

2004-01-01

The round table discussions of the second session of the FSC Belgium Workshop addressed the following questions: - Do local stakeholders have, internally or externally, all the expertise they need in order to address the issues raised by radioactive waste management projects? - Do institutional stakeholders have all the expertise they need to take local impacts into account? - What kinds of expert input are sought and attained by the different stakeholders? - Were any formal methods used to aid local partnerships perform technology assessments? Or other types of assessment? - How to maintain the knowledge and expertise achieved by the stakeholders? Discussion took place after the plenary presentations, at tables grouping Belgian stakeholders and FSC delegates. As in Session I, most of the round table discussion focussed specifically on the experience of the local partnerships. Many insights were shared about the nature and role of expertise in complex decision making. They are summarised below, on the basis of the feedback provided to the plenary by each round table. Some of these insights can be generalised to other contexts. All in all, a profile emerged of the local partnerships as a unique and effective tool to deal with knowledge issues in managing risk. (author)

Identifying and Researching Market Opportunities for New High Technology Products.

Science.gov (United States)

Dunstan, Peter

Using a product called the synchro-pulse welder as a case study example, this paper discusses the activities of CSIRO (Commonwealth Scientific and Industrial Research Organisation) in identifying and marketing new high-technology products. A general discussion of CSIRO's market research plans includes two goals to be attained within the next 5…

Advances in nuclear science and technology

CERN Document Server

Greebler, Paul

1968-01-01

Advances in Nuclear Science and Technology Volume 4 provides information pertinent to the fundamental aspects of advanced reactor concepts. This book discusses the advances in various areas of general applicability, including modern perturbation theory, optimal control theory, and industrial application of ionizing radiations.Organized into seven chapters, this volume begins with an overview of the technology of sodium-cooled fast breeder power reactors and gas-cooled power reactors. This text then examines the key role of reactor safety in the development of fast breeder reactors. Other chapt

Emerging Technologies for Autonomous Language Learning

Directory of Open Access Journals (Sweden)

Mark Warschauer

2011-09-01

Full Text Available Drawing on a lengthier review completed for the US National Institute for Literacy, this paper examines emerging technologies that are applicable to self-access and autonomous learning in the areas of listening and speaking, collaborative writing, reading and language structure, and online interaction. Digital media reviewed include podcasts, blogs, wikis, online writing sites, text-scaffolding software, concordancers, multiuser virtual environments, multiplayer games, and chatbots. For each of these technologies, we summarize recent research and discuss possible uses for autonomous language learning.

The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems.

Science.gov (United States)

Lyon, Aaron R; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J; Unützer, Jürgen; McCauley, Elizabeth

2016-05-01

Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the contextualized technology adaptation process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians' workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors.

The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems

Science.gov (United States)

Lyon, Aaron R.; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J.; Unützer, Jürgen; McCauley, Elizabeth

2015-01-01

Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the Contextualized Technology Adaptation Process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians’ workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors. PMID:25677251

Photovoltaic technology, performance, manufacturing cost and markets

International Nuclear Information System (INIS)

Maycock, P.D.

1999-01-01

A comprehensive discussion of key aspects of photovoltaic energy conversion systems will provide the basis for forecasting PV module shipments from 1999 to 2010. Principal areas covered include: (1) Technology and Performance Status: The module efficiency and performance are described for commercial cell technologies including single crystal silicon, polycrystal silicon, ribbon silicon, film silicon on low cost substrate, amorphous silicon, copper indium diselenide, and cadmium telluride; (2) Manufacturing cost: 1999 costs for PV technologies in production (single crystal silicon, polycrystal silicon, and amorphous silicon) are developed. Manufacturing costs for 10--25 MW plants and 100 MW plants will be estimated; (3) The world PV market is summarized by region, top ten companies, and technology; and (4) Forecast of the World Market (seven market sectors) to 2010 will be presented. Key assumptions, price of modules, incentive programs, price of competing electricity generation will be detailed

Advanced Technologies for Design Information Verification

International Nuclear Information System (INIS)

Watkins, Michael L.; Sheen, David M.; Rose, Joseph L.; Cumblidge, Stephen E.

2009-01-01

This paper discusses several technologies that have the potential to enhance facilities design verification. These approaches have shown promise in addressing the challenges associated with the verification of sub-component geometry and material composition for structures that are not directly accessible for physical inspection. A simple example is a pipe that extends into or through a wall or foundation. Both advanced electromagnetic and acoustic modalities will be discussed. These include advanced radar imaging, transient thermographic imaging, and guided acoustic wave imaging. Examples of current applications are provided. The basic principles and mechanisms of these inspection techniques are presented along with the salient practical features, advantages, and disadvantages of each technique. Other important considerations, such as component geometries, materials, and degree of access are also treated. The importance of, and strategies for, developing valid inspection models are also discussed. Beyond these basic technology adaptation and evaluation issues, important user interface considerations are outlined, along with approaches to quantify the overall performance reliability of the various inspection methods.

Tunable solid-state laser technology for applications to scientific and technological experiments from space

Science.gov (United States)

Allario, F.; Taylor, L. V.

1986-01-01

Current plans for the Earth Observing System (EOS) include development of a lidar facility to conduct scientific experiments from a polar orbiting platforms. A recommended set of experiments were scoped, which includes techniques of atmospheric backscatter (Lidar), Differential Absorption Lidar (DIAL), altimetry, and retroranging. Preliminary assessments of the resources (power, weight, volume) required by the Eos Lidar Facility were conducted. A research program in tunable solid state laser technology was developed, which includes laser materials development, modeling and experiments on the physics of solid state laser materials, and development of solid state laser transmitters with a strong focus on Eos scientific investigations. Some of the system studies that were conducted which highlight the payoff of solid state laser technology for the Eos scientific investigations will be discussed. Additionally, a summary of some promising research results which have recently emerged from the research program will be presented.

Emerging Technologies for Gut Microbiome Research

Science.gov (United States)

Arnold, Jason W.; Roach, Jeffrey; Azcarate-Peril, M. Andrea

2016-01-01

Understanding the importance of the gut microbiome on modulation of host health has become a subject of great interest for researchers across disciplines. As an intrinsically multidisciplinary field, microbiome research has been able to reap the benefits of technological advancements in systems and synthetic biology, biomaterials engineering, and traditional microbiology. Gut microbiome research has been revolutionized by high-throughput sequencing technology, permitting compositional and functional analyses that were previously an unrealistic undertaking. Emerging technologies including engineered organoids derived from human stem cells, high-throughput culturing, and microfluidics assays allowing for the introduction of novel approaches will improve the efficiency and quality of microbiome research. Here, we will discuss emerging technologies and their potential impact on gut microbiome studies. PMID:27426971

Tailings technology. Decommissioning and rehabilitation remedial action technology development

International Nuclear Information System (INIS)

Ramsey, R.W. Jr.

1982-01-01

This paper is to provide an overview of technology requirements for long-term uranium mill tailings disposal and remedial actions for existing tailings to ensure their adequate disposal. The paper examines the scientific disciplines that are the basis for the technology of uranium mill tailings stabilization and the design of barriers to control radiological exposure or environmental degradation at the location of tailings disposal. The discussion is presented as a hypothetical course of instruction at a fictitious university. Features of six mechanisms of dispersal or intrusion are examined with brief discussion of the applicable technology development for each. The paper serves as an introduction to subsequent specific technology development papers in the session. (author)

Youth, Technology and HIV: Recent Advances and Future Directions

Science.gov (United States)

Hightow-Weidman, Lisa B.; Muessig, Kathryn E.; Bauermeister, Jose; Zhang, Chen; LeGrand, Sara

2015-01-01

Technology, including mobile technologies and social media, offers powerful tools to reach, engage, and retain youth and young adults in HIV prevention and care interventions both in the United States and globally. In this report we focus on HIV, technology, and youth, presenting a synthesis of recently published (Jan 2014-May 2015) observational and experimental studies relevant for understanding and intervening on HIV risk, prevention and care. We present findings from a selection of the 66 relevant citations identified, highlighting studies that demonstrate a novel approach to technology interventions among youth in regard to content, delivery, target population or public health impact. We discuss current trends globally and in the US in how youth are using technology, as well as emergent research issues in this field – including the need for new theories for developing technology-based HIV interventions and new metrics of engagement, exposure, and evaluation. PMID:26385582

Earthing Technology

NARCIS (Netherlands)

Blok, Vincent

2017-01-01

In this article, we reflect on the conditions under which new technologies emerge in the Anthropocene and raise the question of how to conceptualize sustainable technologies therein. To this end, we explore an eco-centric approach to technology development, called biomimicry. We discuss opposing

Discussion 2: David Dobbs

OpenAIRE

Dobbs, David; Murray-Rust, Peter; Hatcher, Jordan; Pollock, Rufus

2010-01-01

David Dobbs writes on science, medicine and culture. He has contributed to a diversity of publications, including Scientific American, Slate magazine, Wired, Audubon, Atlantic Monthly, and the New York Times magazine. He has also authored a number of books. Other participants in this discussion were Peter Murray-Rust, Jordan Hatcher, and Rufus Pollock.

The Warrant for Constructivist Practice within Educational Technology.

Science.gov (United States)

Bopry, Jeanette

1999-01-01

Discusses educational technology as a form of technical rationality and considers the conflict between practitioners' epistemological position as constructivists and technical rationality. Topics include cybernetics; autonomous systems theory; enactive constructivism; representation versus effective action; mind and memory; enaction in artificial…

Discussion of Minos Mine operating system

Energy Technology Data Exchange (ETDEWEB)

Pan, B.

1991-10-01

The MINOS (mine operating system), which is used in the majority of British collieries, provides central control at the surface for the machinery and environmental equipment distributed throughout the mine. Installed equipment, including face machinery, conveyors, pumps, fans and sensors are connected to local outstations which all communicate with the control system via a single run of signal cable. The article discusses the system particularly its use in the Automated Control System of Underground Mining Locomotives (ACSUML). The discussion includes the use of MINOS to improve wagon identification, the operating principle of ACSUML and the possibilities of a driverless locomotive. 2 figs.

Application of World Wide Web (W3) Technologies in Payload Operations

Science.gov (United States)

Sun, Charles; Windrem, May; Picinich, Lou

1996-01-01

World Wide Web (W3) technologies are considered in relation to their application to space missions. It is considered that such technologies, including the hypertext transfer protocol and the Java object-oriented language, offer a powerful and relatively inexpensive framework for distributed application software development. The suitability of these technologies for payload monitoring systems development is discussed, and the experience gained from the development of an insect habitat monitoring system based on W3 technologies is reported.

Measuring Job Content: Skills, Technology, and Management Practices. Discussion Paper No. 1357-08

Science.gov (United States)

Handel, Michael J.

2008-01-01

The conceptualization and measurement of key job characteristics has not changed greatly for most social scientists since the Dictionary of Occupational Titles and Quality of Employment surveys were created, despite their recognized limitations. However, debates over the roles of job skill requirements, technology, and new management practices in…

Development of alternative energy technologies. Entrepreneurs, new technologies, and social change

Energy Technology Data Exchange (ETDEWEB)

Burns, T R

1985-01-01

This paper discusses the introduction and development of several alternative energy technologies in countries where the innovation process has enjoyed some measure of success: solar water heating (California, Israel), windmills (Denmark), wood and peat for co-generation (Northern New England, Finland) and geo-thermal power (California) as well as heat pumps designed to save energy (West Germany). It is argued that the introduction and development of new technologies - and the socio-technical systems which utilize these technologies - depend on the initiatives of entrepreneurs and social change agents. They engage in adapting and matching technology and social structure (laws, institutions, norms, political and economic forces and social structure generally). Successful developments - as well as blocked or retarded developments - are discussed in terms of such ''compatibility analysis''. Policy implications are also discussed. (orig.).

Discussion on mass concrete construction of wind turbine generator foundation

Science.gov (United States)

Shang, Liang; Wu, Chaoxiang; Yin, Xiaoyong

2018-04-01

Wind power is one of the main power sources currently. China has rich wind power resources, wind power plants are developed faster and faster. However, China wind power construction started late, which is lack of relevant experience technology. It is easy to produce quality problems. The key to the construction quality of wind power plant is the construction quality of mass concrete construction. Therefore, construction technology and quality control of wind turbine generator foundation mass concrete are discussed and analyzed in the paper.

How Computer Technology Expands Educational Options: A Rationale, Recommendations, and a Pamphlet for Administrators.

Science.gov (United States)

Kelch, Panette Evers; Karr-Kidwell, PJ

The purpose of this paper is to provide a historical rationale on how computer technology, particularly the Internet, expands educational options for administrators and teachers. A review of the literature includes a brief history of computer technology and its growing use, and a discussion of computer technology for distance learning, for…

Creating and Diffusing a Technology Champion Course

Science.gov (United States)

Granitz, Neil; Hugstad, Paul

2004-01-01

Excitement has been generated for using Internet technology as a vehicle to further numerous educational objectives, including enhanced student learning, greater integration of business school functional areas, and increased job market relevance. This article discusses how the Introductory Internet Marketing course can be positioned as a…

Panel discussion on laboratory accelerator programs: present and future

International Nuclear Information System (INIS)

Richter, B.

1986-09-01

The present SLAC accelerator program is summarized briefly, and the future of electron-positron colliders is discussed. Present activities discussed include the PEP storage ring, the SPEAR storage ring, the Linear Accelerator, and the SLAC Linear Collider (SLC) project. Future prospects include a larger scale linear collider. The stability requirements on acceleration are briefly discussed

Household's use of information and communication technologies

DEFF Research Database (Denmark)

Jensen, Jesper Ole; Gram-Hanssen, Kirsten; Røpke, Inge

2009-01-01

of theories of domestication of technologies, it is argued that aspects such as consumers' creativity in technology use and their non-adaption are relevant aspects to include in policy and regulation discussions on how to limit the escalating electricity consumption from household ICT use.......Increasing consumption of electricity due to a growing number of information and communication technology (ICT) appliances in households is a major challenge to reducing energy consumption. Several studies have predicted escalating ICT-related energy consumption, but relatively little has been said...... and done about possible initiatives to curb this increase. This paper presents results of a research project focusing on how dynamics of consumption influence household energy consumption on ICT. Results of the project include scenarios on how electricity consumption on ICT is expected to grow, suggesting...

Information and Communication Technology in the Israeli Educational System: Past, Present and Future.

Science.gov (United States)

Katz, Yaacov J.

2002-01-01

Describes the development of the use of information and communication technology (ICT) in the Israeli educational system. Discusses a behaviorist approach to computer assisted instruction; open-ended courseware; constructivist approaches to multimedia, including simulations, modeling, and virtual reality; technology-based distance learning; and…

Round table discussion: Present and future applications of nanocrystalline magnetic materials

International Nuclear Information System (INIS)

Herzer, G.; Vazquez, M.; Knobel, M.; Zhukov, A.; Reininger, T.; Davies, H.A.; Groessinger, R.; Sanchez Ll, J.L.

2005-01-01

Examples of existing or potential applications of nanocrystalline magnetic materials, ranging from soft to hard magnetic alloys, are presented and discussed by experts in the respective fields of research and technology

Magnetic levitation Maglev technology and applications

CERN Document Server

Han, Hyung-Suk

2016-01-01

This book provides a comprehensive overview of magnetic levitation (Maglev) technologies, from fundamental principles through to the state-of-the-art, and describes applications both realised and under development. It includes a history of Maglev science and technology showing the various milestones in its advancement. The core concepts, operating principles and main challenges of Maglev applications attempted across various fields are introduced and discussed. The principle difficulties encountered when applying Maglev technology to different systems, namely air gap control and stabilization, are addressed in detail. The book describes how major advancements in linear motor and magnet technologies have enabled the development of the linear-motor-powered Maglev train, which has a high speed advantage over conventional wheeled trains and has the potential to reach speed levels achieved by aircraft. However, many expect that Maglev technology to be a green technology that is applied not only in rail transportat...

TECHNOLOGY ROADMAPPING FOR IAEA SEALS.

Energy Technology Data Exchange (ETDEWEB)

HOFFHEINS,B.; ANNESE,C.; GOODMAN,M.; OCONNOR,W.; GUSHUE,S.; PEPPER,S.

2003-07-13

In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The

Online Information Technologies Certificate Program

Directory of Open Access Journals (Sweden)

Erman YUKSELTURK

2005-01-01

Full Text Available Online Information Technologies Certificate Program Res. Ass. Erman YUKSELTURK Middle East Technical University Department of Computer Education and Instructional Technology, Faculty of Education, Ankara, TURKEY ABSTRACT In this study, Information Technologies Certificate Program which is based on synchronous and asynchronous communication methods over the Internet offered by cooperation of Middle East Technical University, Computer Engineering Department and Continuing Education Center were examined. This online certificate program started in May 1998 and it is still active. The program includes eight fundamental courses of Computer Engineering Department and comprised of four semesters lasting totally nine months. The main aim of this program is to train the participants in IT field to meet demand in the field of computer technologies in Turkey. As a conclusion, the properties of this program were discussed in a detailed way.

Research progress from the SCI Model Systems (SCIMS): An interactive discussion on future directions.

Science.gov (United States)

Boninger, Michael L; Field-Fote, Edelle C; Kirshblum, Steven C; Lammertse, Daniel P; Dyson-Hudson, Trevor A; Hudson, Lesley; Heinemann, Allen W

2018-03-01

To describe current and future directions in spinal cord injury (SCI) research. The SCI Model Systems (SCIMS) programs funded by the National Institute on Disability, Independent Living, and Rehabilitation Research (NIDILRR) during the 2011 to 2016 cycle provided abstracts describing findings from current research projects. Discussion among session participants generated ideas for research opportunities. Pre-conference workshop before the 2016 American Spinal Injury Association (ASIA) annual meeting. A steering committee selected by the SCIMS directors that included the moderators of the sessions at the ASIA pre-conference workshop, researchers presenting abstracts during the session, and the audience of over 100 attending participants in the pre-conference workshop. Group discussion followed presentations in 5 thematic areas of (1) Demographics and Measurement; (2) Functional Training; (3) Psychosocial Considerations; (4) Assistive Technology; and (5) Secondary Conditions. The steering committee reviewed and summarized discussion points on future directions for research and made recommendations for research based on the discussion in each of the five areas. Significant areas in need of research in SCI remain, the goal of which is continued improvement in the quality of life of individuals with SCI.

Strengthening technological capabilities: A challenge for the nineties. A review of ILO activities on technology. 3. ed.

International Nuclear Information System (INIS)

1992-01-01

This report was inspired by the 11th Session (1991) of the Intergovernmental Committee on Science and Technology for Development (IGC) where ILO activities figured prominently in the documentation and discussions that took place on the trends in the programmes and activities of the UN system in science and technology for development. The report deals with ILO activities in the areas of endogenous capacity building, technology policy assessment, anticipation of employment effects of new technologies, assessment of the effects of new technologies on working conditions and working environment, training needs for the effective utilisation of new technologies, technological change and industrial relations and the dissemination of technological information. It also reports on the new ILO work launched on environment and employment, including the role of environmentally sound technologies. The concluding chapter of the report deals with interagency collaboration to which the ILO has always attached importance. ILO work evolving policies for occupational safety and health is described in the following distinct areas of new technologies: (i) man-made mineral fibres; (ii) biotechnology, (iii) robotisation; (iv) chemicals; and (v) dismantling of nuclear power plants

Electro-Optics Millimeter/Microwave Technology in Japan. Report of DoD Technology Team.

Science.gov (United States)

1985-05-01

sink packages covering frequencies up to 94 GHz is being produced. They are suitable for both con- tinuous wave (CW) and pulsed operations. Mean -time...Processing Tel ecommunications Semiconductor and Electronic Components The Technology Team visited the Fujitsu Laboratory, Kanagawa. Topics covered included...Japan, the representatives of the Government of Japan and the Government of the United States of America have held discussions on the ways and means to

Preparing for the changing role of instructional technologies in medical education.

Science.gov (United States)

Robin, Bernard R; McNeil, Sara G; Cook, David A; Agarwal, Kathryn L; Singhal, Geeta R

2011-04-01

As part of an international faculty development conference in February 2010, a working group of medical educators and physicians discussed the changing role of instructional technologies and made recommendations for supporting faculty in using these technologies in medical education. The resulting discussion highlighted ways technology is transforming the entire process of medical education and identified several converging trends that have implications for how medical educators might prepare for the next decade. These trends include the explosion of new information; all information, including both health knowledge and medical records, becoming digital; a new generation of learners; the emergence of new instructional technologies; and the accelerating rate of change, especially related to technology. The working group developed five recommendations that academic health leaders and policy makers may use as a starting point for dealing with the instructional technology challenges facing medical education over the next decade. These recommendations are (1) using technology to provide/support experiences for learners that are not otherwise possible-not as a replacement for, but as a supplement to, face-to-face experiences, (2) focusing on fundamental principles of teaching and learning rather than learning specific technologies in isolation, (3) allocating a variety of resources to support the appropriate use of instructional technologies, (4) supporting faculty members as they adopt new technologies, and (5) providing funding and leadership to enhance electronic infrastructure to facilitate sharing of resources and instructional ideas. © by the Association of American Medical Colleges.

Considerations for Solar Energy Technologies to Make Progress Towards Grid Price Parity

Energy Technology Data Exchange (ETDEWEB)

Woodhouse, Michael; Fu, Ran; Chung, Donald; Horowitz, Kelsey; Remo, Timothy; Feldman, David; Margolis, Robert

2015-11-07

In this seminar the component costs for solar photovoltaics module and system prices will be highlighted. As a basis for comparison to other renewable and traditional energy options, the metric of focus will be total lifecycle cost-of-energy (LCOE). Several innovations to traditional photovoltaics technologies (including crystalline silicon, CdTe, and CIGS) and developing technologies (including organics and perovskites) that may close the gaps in LCOE will be discussed.

The development and technology transfer of software engineering technology at NASA. Johnson Space Center

Science.gov (United States)

Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

1992-01-01

The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

Underpinning the STEM Agenda through Technological Textiles? An Exploration of Design Technology Teachers' Attitudes

Science.gov (United States)

Hughes, Chris; Bell, Dawne

2011-01-01

This paper discusses ongoing research into the role of design and technology education in emerging post industrial economies. Previous work (Hughes et al., 2010) focused on the changing characteristics of textiles technology in modern times and discussed how this could inform a design and technology curriculum related to the needs of a modern…

Principles for fostering the transdisciplinary development of assistive technologies.

Science.gov (United States)

Boger, Jennifer; Jackson, Piper; Mulvenna, Maurice; Sixsmith, Judith; Sixsmith, Andrew; Mihailidis, Alex; Kontos, Pia; Miller Polgar, Janice; Grigorovich, Alisa; Martin, Suzanne

2017-07-01

Developing useful and usable assistive technologies often presents complex (or "wicked") challenges that require input from multiple disciplines and sectors. Transdisciplinary collaboration can enable holistic understanding of challenges that may lead to innovative, impactful and transformative solutions. This paper presents generalised principles that are intended to foster transdisciplinary assistive technology development. The paper introduces the area of assistive technology design before discussing general aspects of transdisciplinary collaboration followed by an overview of relevant concepts, including approaches, methodologies and frameworks for conducting and evaluating transdisciplinary working and assistive technology design. The principles for transdisciplinary development of assistive technologies are presented and applied post hoc to the COACH project, an ambient-assisted living technology for guiding completion of activities of daily living by older adults with dementia as an illustrative example. Future work includes the refinement and validation of these principles through their application to real-world transdisciplinary assistive technology projects. Implications for rehabilitation Transdisciplinarity encourages a focus on real world 'wicked' problems. A transdisciplinary approach involves transcending disciplinary boundaries and collaborating with interprofessional and community partners (including the technology's intended users) on a shared problem. Transdisciplinarity fosters new ways of thinking about and doing research, development, and implementation, expanding the scope, applicability, and commercial viability of assistive technologies.

High temperature vapors science and technology

CERN Document Server

Hastie, John

2012-01-01

High Temperature Vapors: Science and Technology focuses on the relationship of the basic science of high-temperature vapors to some areas of discernible practical importance in modern science and technology. The major high-temperature problem areas selected for discussion include chemical vapor transport and deposition; the vapor phase aspects of corrosion, combustion, and energy systems; and extraterrestrial high-temperature species. This book is comprised of seven chapters and begins with an introduction to the nature of the high-temperature vapor state, the scope and literature of high-temp

Assessment of the competing technologies to fuel cells in the stationary power and CHP markets

Energy Technology Data Exchange (ETDEWEB)

Pears, T.J.

1999-07-01

This report summarises the results of a study assessing the commercial technologies that are likely to compete with fuel cells in the fields of stationary power and cogeneration markets. The competing technologies examined include clean coal technologies, reciprocating engines, gas turbines, microturbines, and stirling engines. Energy and environmental legislation, and the ranking of the competing technologies are discussed. (UK)

Access to augmentative and alternative communication: new technologies and clinical decision-making.

Science.gov (United States)

Fager, Susan; Bardach, Lisa; Russell, Susanne; Higginbotham, Jeff

2012-01-01

Children with severe physical impairments require a variety of access options to augmentative and alternative communication (AAC) and computer technology. Access technologies have continued to develop, allowing children with severe motor control impairments greater independence and access to communication. This article will highlight new advances in access technology, including eye and head tracking, scanning, and access to mainstream technology, as well as discuss future advances. Considerations for clinical decision-making and implementation of these technologies will be presented along with case illustrations.

Future Vehicle Technologies : high performance transportation innovations

Energy Technology Data Exchange (ETDEWEB)

Pratt, T. [Future Vehicle Technologies Inc., Maple Ridge, BC (Canada)

2010-07-01

Battery management systems (BMS) were discussed in this presentation, with particular reference to the basic BMS design considerations; safety; undisclosed information about BMS; the essence of BMS; and Future Vehicle Technologies' BMS solution. Basic BMS design considerations that were presented included the balancing methodology; prismatic/cylindrical cells; cell protection; accuracy; PCB design, size and components; communications protocol; cost of manufacture; and expandability. In terms of safety, the presentation addressed lithium fires; high voltage; high voltage ground detection; crash/rollover shutdown; complete pack shutdown capability; and heat shields, casings, and impact protection. BMS bus bar engineering considerations were discussed along with good chip design. It was concluded that FVTs advantage is a unique skillset in automotive technology and the development of speed and cost effectiveness. tabs., figs.

Semantic web implications for technologies and business practices

CERN Document Server

2016-01-01

This book examines recent developments in semantic systems that can respond to situations and environments and events. The contributors to this book cover how to design, implement, and utilize disruptive technologies from the semantic and Web 3.0 arena. The editor and the contributors discuss two fundamental sets of disruptive technologies: the development of semantic technologies including description logics, ontologies, and agent frameworks; and the development of semantic information rendering including graphical forms of displays of high-density time-sensitive data to improve situational awareness. Beyond practical illustrations of emerging technologies, the goal of this book is to help readers learn about managing information resources in new ways and reinforcing the learning as they read on.   ·         Examines the contrast of competing paradigms and approaches to problem solving and decision-making using technology tools and techniques ·         Covers how to use semantic principle...

Navigation studies based on the ubiquitous positioning technologies

Science.gov (United States)

Ye, Lei; Mi, Weijie; Wang, Defeng

2007-11-01

This paper summarized the nowadays positioning technologies, such as absolute positioning methods and relative positioning methods, indoor positioning and outdoor positioning, active positioning and passive positioning. Global Navigation Satellite System (GNSS) technologies were introduced as the omnipresent out-door positioning technologies, including GPS, GLONASS, Galileo and BD-1/2. After analysis of the shortcomings of GNSS, indoor positioning technologies were discussed and compared, including A-GPS, Cellular network, Infrared, Electromagnetism, Computer Vision Cognition, Embedded Pressure Sensor, Ultrasonic, RFID (Radio Frequency IDentification), Bluetooth, WLAN etc.. Then the concept and characteristics of Ubiquitous Positioning was proposed. After the ubiquitous positioning technologies contrast and selection followed by system engineering methodology, a navigation system model based on Incorporate Indoor-Outdoor Positioning Solution was proposed. And this model was simulated in the Galileo Demonstration for World Expo Shanghai project. In the conclusion, the prospects of ubiquitous positioning based navigation were shown, especially to satisfy the public location information acquiring requirement.

Avionics systems integration technology

Science.gov (United States)

Stech, George; Williams, James R.

1988-01-01

A very dramatic and continuing explosion in digital electronics technology has been taking place in the last decade. The prudent and timely application of this technology will provide Army aviation the capability to prevail against a numerically superior enemy threat. The Army and NASA have exploited this technology explosion in the development and application of avionics systems integration technology for new and future aviation systems. A few selected Army avionics integration technology base efforts are discussed. Also discussed is the Avionics Integration Research Laboratory (AIRLAB) that NASA has established at Langley for research into the integration and validation of avionics systems, and evaluation of advanced technology in a total systems context.

Assistive technology evaluations: Remote-microphone technology for children with Autism Spectrum Disorder.

Science.gov (United States)

Schafer, Erin C; Wright, Suzanne; Anderson, Christine; Jones, Jessalyn; Pitts, Katie; Bryant, Danielle; Watson, Melissa; Box, Jerrica; Neve, Melissa; Mathews, Lauren; Reed, Mary Pat

The goal of this study was to conduct assistive technology evaluations on 12 children diagnosed with Autism Spectrum Disorder (ASD) to evaluate the potential benefits of remote-microphone (RM) technology. A single group, within-subjects design was utilized to explore individual and group data from functional questionnaires and behavioral test measures administered, designed to assess school- and home-based listening abilities, once with and once without RM technology. Because some of the children were unable to complete the behavioral test measures, particular focus was given to the functional questionnaires completed by primary teachers, participants, and parents. Behavioral test measures with and without the RM technology included speech recognition in noise, auditory comprehension, and acceptable noise levels. The individual and group teacher (n=8-9), parent (n=8-9), and participant (n=9) questionnaire ratings revealed substantially less listening difficulty when RM technology was used compared to the no-device ratings. On the behavioral measures, individual data revealed varied findings, which will be discussed in detail in the results section. However, on average, the use of the RM technology resulted in improvements in speech recognition in noise (4.6dB improvement) in eight children, higher auditory working memory and comprehension scores (12-13 point improvement) in seven children, and acceptance of poorer signal-to-noise ratios (8.6dB improvement) in five children. The individual and group data from this study suggest that RM technology may improve auditory function in children with ASD in the classroom, at home, and in social situations. However, variability in the data and the inability of some children to complete the behavioral measures indicates that individualized assistive technology evaluations including functional questionnaires will be necessary to determine if the RM technology will be of benefit to a particular child who has ASD. Copyright �

Monitoring human health behaviour in one's living environment: a technological review.

Science.gov (United States)

Lowe, Shane A; Ólaighin, Gearóid

2014-02-01

The electronic monitoring of human health behaviour using computer techniques has been an active research area for the past few decades. A wide array of different approaches have been investigated using various technologies including inertial sensors, Global Positioning System, smart homes, Radio Frequency IDentification and others. It is only in recent years that research has turned towards a sensor fusion approach using several different technologies in single systems or devices. These systems allow for an increased volume of data to be collected and for activity data to be better used as measures of behaviour. This change may be due to decreasing hardware costs, smaller sensors, increased power efficiency or increases in portability. This paper is intended to act as a reference for the design of multi-sensor behaviour monitoring systems. The range of technologies that have been used in isolation for behaviour monitoring both in research and commercial devices are reviewed and discussed. Filtering, range, sensitivity, usability and other considerations of different technologies are discussed. A brief overview of commercially available activity monitors and their technology is also included. Copyright © 2013 IPEM. Published by Elsevier Ltd. All rights reserved.

Controlling the cost of clean air - A new clean coal technology

International Nuclear Information System (INIS)

Kindig, J.K.; Godfrey, R.L.

1991-01-01

This article presents the authors' alternative to expensive coal combustion products clean-up by cleaning the coal, removing the sulfur, before combustion. Topics discussed include sulfur in coal and the coal cleaning process, the nature of a new coal cleaning technology, the impact on Clean Air Act compliance, and the economics of the new technology

Information Technology and Language Development. Occasional Paper InTER/10/89.

Science.gov (United States)

Rymaszewski, Rachel, Ed.

This report of a seminar on information technology (IT) and language development begins by presenting background on language skills and information technology in order to define the scope of the topic. The report then pulls together and elaborates on the output of the seminar. The first section discusses media-centered issues, including the design…

The Discussion around the agricultural Products Genetically Modified

International Nuclear Information System (INIS)

Gomez H, Andres

2003-01-01

The transgenic products or genetically modified have been product of the vertiginous technological developments related with the sciences of the life and mainly of the genetics. The Introduction of these products to the market has generated big expectations and discussions. It is undoubtedly intention of this paper to provide the reader a conceptual mark that identifies the main arguments exposed by the parts in debate, to identify the most relevant aspects in the international legislation and to describe shortly how the topic is approached in Colombia. They are gathered this way then and the so much arguments of defenders like opponents contain regarding the topic, among those that the improvement, of the productivity and the yields can be included by cultivated meter, the decrease of the malnutrition at world level, environmental risks for possible reductions of the biodiversity and of development of resistant plagues to pesticides or herbicides, among others. At international level the first steps are giving to unify a clear legislation in this respect, although at the moment it is not articulate with other legislations like the World Trade Organization WTO)

The Voice as Computer Interface: A Look at Tomorrow's Technologies.

Science.gov (United States)

Lange, Holley R.

1991-01-01

Discussion of voice as the communications device for computer-human interaction focuses on voice recognition systems for use within a library environment. Voice technologies are described, including voice response and voice recognition; examples of voice systems in use in libraries are examined; and further possibilities, including use with…

Technological risk

Energy Technology Data Exchange (ETDEWEB)

Dierkes, M; Coppock, R; Edwards, S

1980-01-01

The book begins with brief statements from representatives of political organizations. Part II presents an overview of the discussion about the control and management of technological progress. Parts III and IV discuss important elements in citizens' perception of technological risks and the development of consensus on how to deal with them. In Part V practical problems in the application of risk assessment and management, and in Part VI additional points are summarized.

Technological risk

International Nuclear Information System (INIS)

Dierkes, M.; Coppock, R.; Edwards, S.

1980-01-01

The book begins with brief statements from representatives of political organizations. Part II presents an overview of the discussion about the control and management of technological progress. Parts III and IV discuss important elements in citizens' perception of technological risks and the development of consensus on how to deal with them. In Part V practical problems in the application of risk assessment and management, and in Part VI additional points are summarized. (DG)

Summary of the second international conference on electrostatic accelerator technology

International Nuclear Information System (INIS)

Wegner, H.E.

1977-01-01

A review is given of the history of electrostatic accelerator technology, including a technology assessment of acceleration tubes, vacuum systems, voltage gradients, charging systems, and ion sources. Improvements in the performance of electrostatic accelerators during the last four years and of those currently under construction are discussed. The improved performance has greatly expanded the heavy ion research capabilities of the entire research community

'New technology' of EJAM and its objective

International Nuclear Information System (INIS)

Dozaki, Koji

2009-01-01

Electronic Journal of Advanced Maintenance (EJAM) has been issued on the website of Japan Society of Maintenology (JSM) on May 25th, 2009. 'New Technology' is one of the EJAM categories, and introduces widely advanced techniques developed or modified for maintenance. 'New Technology' has been created through discussion by members of the New Technology Committee, which is in the editorial organization of EJAM. In that discussion, it was pointed out that people concerned with maintenance technology have not had any forums or fields for discussion or evaluation of the technology in common. It is intended that 'New Technology' will provide such forums or fields for sharing information and discussing the detail about maintenance technology in worldwide manner. This report introduces the policy of 'New Technology' and its objective. (author)

BUILDING BLOCKS: ENMESHING TECHNOLOGY AND CREATIVITY WITH ARTISTIC PEDAGOGICAL TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Katherine J.JANZEN

2017-01-01

Full Text Available Using the analogy of children’s building blocks, the reader is guided through the results of a research study that explored the use of three Artistic Pedagogical Technologies (APTs. ‘Building blocks’ was the major theme that emerged from the data. Sub-themes included developing community, enhancing creativity, and risk taking. The discourse of the paper centers on how selected APTs stimulate interaction, create social presence, and help develop community in the online post-secondary classroom. Additional findings are discussed and implications are presented.

Radiation Testing, Characterization and Qualification Challenges for Modern Microelectronics and Photonics Devices and Technologies

Science.gov (United States)

LaBel, Kenneth A.; Cohn, Lewis M.

2008-01-01

At GOMAC 2007, we discussed a selection of the challenges for radiation testing of modern semiconductor devices focusing on state-of-the-art memory technologies. This included FLASH non-volatile memories (NVMs) and synchronous dynamic random access memories (SDRAMs). In this presentation, we extend this discussion in device packaging and complexity as well as single event upset (SEU) mechanisms using several technology areas as examples including: system-on-a-chip (SOC) devices and photonic or fiber optic systems. The underlying goal is intended to provoke thought for understanding the limitations and interpretation of radiation testing results.

The Ultimate Technology

DEFF Research Database (Denmark)

Riis, Søren

2013-01-01

One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However, by reinterp......One of the most influential philosophers of the 20th century, Martin Heidegger (1889-1976), died prior to the remarkable cloning of the sheep Dolly and before Dr. Venter started his experiments on creating synthetic life, and he never explicitly discussed living technologies. However......, by reinterpreting his notion of "modern technology," this article shows how it is possible to philosophically assess living technologies and to recognize ways in which Heidegger anticipated this phenomenon with his notion of cybernetics. The interpretation elucidates the fundamental process of technology becoming...... living and simultaneously presents living technology as the ultimate technology. The thesis of this article is that living technology is not just one more technology; rather, it is the perfection of technology as understood by Aristotle. Aristotle's thinking is in this way a key example of a profound...

Emission Control Technologies for Thermal Power Plants

Science.gov (United States)

Nihalani, S. A.; Mishra, Y.; Juremalani, J.

2018-03-01

Coal thermal power plants are one of the primary sources of artificial air emissions, particularly in a country like India. Ministry of Environment and Forests has proposed draft regulation for emission standards in coal-fired power plants. This includes significant reduction in sulphur-dioxide, oxides of nitrogen, particulate matter and mercury emissions. The first step is to evaluate the technologies which represent the best selection for each power plant based on its configuration, fuel properties, performance requirements, and other site-specific factors. This paper will describe various technology options including: Flue Gas Desulfurization System, Spray Dryer Absorber (SDA), Circulating Dry Scrubber (CDS), Limestone-based Wet FGD, Low NOX burners, Selective Non Catalytic Reduction, Electrostatic Precipitator, Bag House Dust Collector, all of which have been evaluated and installed extensively to reduce SO2, NOx, PM and other emissions. Each control technology has its advantages and disadvantages. For each of the technologies considered, major features, potential operating and maintenance cost impacts, as well as key factors that contribute to the selection of one technology over another are discussed here.

Students' Engagement with Learning Technologies

Science.gov (United States)

Larkin, Derek; Huett, Kim C.

2013-01-01

This paper seeks to add to the discussion surrounding young adults' relationship and engagement with learning technologies, exploring whether they naturally engage with these technologies when the use of them is either compulsory or optional. We discuss our findings in relation to whether young people are truly engaging with technologies or…

Crystal Growth Technology

Science.gov (United States)

Scheel, Hans J.; Fukuda, Tsuguo

2004-06-01

This volume deals with the technologies of crystal fabrication, of crystal machining, and of epilayer production and is the first book on industrial and scientific aspects of crystal and layer production. The major industrial crystals are treated: Si, GaAs, GaP, InP, CdTe, sapphire, oxide and halide scintillator crystals, crystals for optical, piezoelectric and microwave applications and more. Contains 29 contributions from leading crystal technologists covering the following topics: General aspects of crystal growth technology Silicon Compound semiconductors Oxides and halides Crystal machining Epitaxy and layer deposition Scientific and technological problems of production and machining of industrial crystals are discussed by top experts, most of them from the major growth industries and crystal growth centers. In addition, it will be useful for the users of crystals, for teachers and graduate students in materials sciences, in electronic and other functional materials, chemical and metallurgical engineering, micro-and optoelectronics including nanotechnology, mechanical engineering and precision-machining, microtechnology, and in solid-state sciences.

Technologies for the future : conventional recovery enhancement

Energy Technology Data Exchange (ETDEWEB)

Isaacs, E. [Alberta Energy Research Inst., Edmonton, AB (Canada)

2005-07-01

This conference presentation examined Alberta's oil production and water use; global finding and development costs across continents; and current trends for conventional oil. The presentation examined opportunities for testing new technologies for enhanced oil recovery (EOR) and provided several tables of data on EOR production in the United States. The evolution of United States EOR production, and the number of EOR projects in Canada were also addressed. The presentation also discussed where EOR goes from here as well as the different EOR mechanisms to alter phase behaviour and to alter relative flow. It also discussed chemical methods and major challenges for chemical EOR and examined EOR technologies needing a major push in the Western Canada Sedimentary Basin. Lessons learned from the Joffre site regarding carbon dioxide miscible flood were revealed along with how coal gasification produces substitute natural gas and carbon dioxide for EOR. Suggestions for research and technology and enhanced water management were included. tabs., figs.

A comprehensive guide of remediation technologies for oil contaminated soil - Present works and future directions.

Science.gov (United States)

Lim, Mee Wei; Lau, Ee Von; Poh, Phaik Eong

2016-08-15

Oil spills result in negative impacts on the environment, economy and society. Due to tidal and waves actions, the oil spillage affects the shorelines by adhering to the soil, making it difficult for immediate cleaning of the soil. As shoreline clean-up is the most costly component of a response operation, there is a need for effective oil remediation technologies. This paper provides a review on the remediation technologies for soil contaminated with various types of oil, including diesel, crude oil, petroleum, lubricating oil, bitumen and bunker oil. The methods discussed include solvent extraction, bioremediation, phytoremediation, chemical oxidation, electrokinetic remediation, thermal technologies, ultrasonication, flotation and integrated remediation technologies. Each of these technologies was discussed, and associated with their advantages, disadvantages, advancements and future work in detail. Nonetheless, it is important to note that no single remediation technology is considered the best solution for the remediation of oil contaminated soil. This review provides a comprehensive literature on the various remediation technologies studied in the removal of different oil types from soil. Copyright © 2016 Elsevier Ltd. All rights reserved.

Genome-editing technologies and their potential application in horticultural crop breeding

Science.gov (United States)

Xiong, Jin-Song; Ding, Jing; Li, Yi

2015-01-01

Plant breeding, one of the oldest agricultural activities, parallels human civilization. Many crops have been domesticated to satisfy human's food and aesthetical needs, including numerous specialty horticultural crops such as fruits, vegetables, ornamental flowers, shrubs, and trees. Crop varieties originated through selection during early human civilization. Other technologies, such as various forms of hybridization, mutation, and transgenics, have also been invented and applied to crop breeding over the past centuries. The progress made in these breeding technologies, especially the modern biotechnology-based breeding technologies, has had a great impact on crop breeding as well as on our lives. Here, we first review the developmental process and applications of these technologies in horticultural crop breeding. Then, we mainly describe the principles of the latest genome-editing technologies and discuss their potential applications in the genetic improvement of horticultural crops. The advantages and challenges of genome-editing technologies in horticultural crop breeding are also discussed. PMID:26504570

Recovery of Navy distillate fuel from reclaimed product. Volume I. Technical discussion

Energy Technology Data Exchange (ETDEWEB)

Brinkman, D.W.; Whisman, M.L.

1984-11-01

In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). The first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in which experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 referenvces and abstracts. This appendix, because of its volume, has been published separately as Volume 2. 18 figures, 4 tables.

Consulting Basics for the Teacher-Turned-Technology Consultant.

Science.gov (United States)

Stager, Sue; Green, Kathy

1988-01-01

Discusses the role of educational technology consultants who may be classroom teachers with no formal training in consulting. Consulting models are described, including content-oriented and process-oriented approaches; Schein's process facilitator model is examined; and Kurpius' consulting model is explained and expanded. (LRW)

Discussion on Safety Analysis and Regulatory Framework for the Future Fusion Reactors

Energy Technology Data Exchange (ETDEWEB)

Kang, Myoung-suk; Oh, Kyemin; Heo, Gyunyoung [Kyung Hee University, Yongin (Korea, Republic of)

2015-05-15

This study aims to secure the core original technologies and expand the base of domestic specialist at a fusion area by pursuing and developing nonprocurement technologies for ITER. From this project, the latest technical data and experiences have been recorded for the development of the safety regulation and safety-related design criteria of the future fusion reactors in Korea. In this context, this paper discusses on the progress of surveying the ITER licensing process and regulatory issues revealed. The regulation and licensing process for a fusion power plant has been expected to be quite different due to unique and unforeseen properties differently from the conventional nuclear facilities. To overcome this, not only various safety issues should be analyzed, but safety objectives, regulatory requirements, and design variables should also be established in detailed design phase. We expect our survey will contribute on the discussion to establish general and technical safety principles for national fusion power plant technology plans.

Biomedical technology transfer: Bioinstrumentation for cardiology, neurology, and the circulatory system

Science.gov (United States)

1976-01-01

Developments in applying aerospace medical technology to the design and production of medical equipment and instrumentation are reported. Projects described include intercranial pressure transducers, leg negative pressure devices, a synthetic speech prosthesis for victims of cerebral palsy, and a Doppler blood flow instrument. Commercialization activities for disseminating and utilizing NASA technology, and new biomedical problem areas are discussed.

Whole blood pathogen reduction technology and blood safety in sub-Saharan Africa: A systematic review with regional discussion.

Science.gov (United States)

Nkohkwo, Asa'ah; Agbor, Gabriel; Asongalem, Emmanuel; Tagny, Claude; Asonganyi, Tazoacha

2016-01-01

Despite vast improvements in transfusion services in sub-Saharan Africa over the last decade, there remain serious concerns on the safety and adequacy of the blood supply across the region. This review paper ascertains the role of pathogen reduction technology (PRT) in improving blood safety and supply adequacy in the region. The state of blood safety in sub-Saharan Africa was reviewed. Meetings, seminars and correspondence were undertaken with key clinicians, scientists and professional bodies in the region, including the World Health Organization's Regional Office for Africa, to examine the suitability of PRT for improving the safety of whole blood transfusion, a prevalent transfusion format in the region. Existing literature suggests that combining PRT with current blood safety measures (such as serology) would improve the safety and adequacy of the blood supply for transfusions in sub-Saharan Africa. This was echoed by the findings of the stakeholder meetings. Following a detailed appraisal of two leading PRT systems, the Mirasol ® PRT System and the Cerus S-303 System, we suggest that companies conduct comprehensive toxicological evaluation of the agents used for PRT and publish this in the scientific literature. We also recommend that the safety and efficacy of these technologies should be established in a randomised clinical trial conducted in sub-Saharan Africa.

Modifying the Sleep Treatment Education Program for Students to include technology use (STEPS-TECH): Intervention effects on objective and subjective sleep outcomes.

Science.gov (United States)

Barber, Larissa K; Cucalon, Maria S

2017-12-01

University students often have sleep issues that arise from poor sleep hygiene practices and technology use patterns. Yet, technology-related behaviors are often neglected in sleep hygiene education. This study examined whether the Sleep Treatment Education Program for Students-modified to include information regarding managing technology use (STEPS-TECH)-helps improve both subjective and objective sleep outcomes among university students. Results of an experimental study among 78 university students showed improvements in objective indicators of sleep quantity (total sleep time) and sleep quality (less awakenings) during the subsequent week for students in the STEPS-TECH intervention group compared to a control group. Exploratory analyses indicated that effects were driven by improvements in weekend days immediately following the intervention. There were also no intervention effects on subjective sleep quality or quantity outcomes. In terms of self-reported behavioral responses to educational content in the intervention, there were no group differences in sleep hygiene practices or technology use before bedtime. However, the intervention group reported less technology use during sleep periods than the control group. These preliminary findings suggest that STEPS-TECH may be a useful educational tool to help improve objective sleep and reduce technology use during sleep periods among university students. Copyright © 2017 John Wiley & Sons, Ltd.

Implementation digital technologies in nuclear utilities

Energy Technology Data Exchange (ETDEWEB)

Wiegand, C.; Maselli, A.J., E-mail: Tony.Maselli@Invensys.com [Invensys Operations Management, London (United Kingdom)

2012-07-01

The introduction of digital technologies into the nuclear industry has assisted in many ways and made many of the Life Extensions and Uprates a possibility. But with this introduction of digital technologies comes some potentially challenging issues which need to be addressed for ultimate project success. This presentation discusses what a nuclear utility should consider and establish when implementing digital technologies in their plant. Digital technologies have been employed in many safety critical industries such as Aerospace, Pharmaceutical, Oil and Gas, and Chemical. However, nuclear industry implementation of digital technologies has been slow and in many ways tenuous. There are even documented operating experience events in which plant trips/SCRAMs occurred during a digital system implementation. This presentation aims to prevent those issues drawing upon the lessons learned over the past 5 years. Considerations include general challenges to overcome when implementing Digital Technologies, how to justify and execute projects, evaluation of resource knowledge, and the new challenges of Cyber Security. (author)

Implementation digital technologies in nuclear utilities

International Nuclear Information System (INIS)

Wiegand, C.; Maselli, A.J.

2012-01-01

The introduction of digital technologies into the nuclear industry has assisted in many ways and made many of the Life Extensions and Uprates a possibility. But with this introduction of digital technologies comes some potentially challenging issues which need to be addressed for ultimate project success. This presentation discusses what a nuclear utility should consider and establish when implementing digital technologies in their plant. Digital technologies have been employed in many safety critical industries such as Aerospace, Pharmaceutical, Oil and Gas, and Chemical. However, nuclear industry implementation of digital technologies has been slow and in many ways tenuous. There are even documented operating experience events in which plant trips/SCRAMs occurred during a digital system implementation. This presentation aims to prevent those issues drawing upon the lessons learned over the past 5 years. Considerations include general challenges to overcome when implementing Digital Technologies, how to justify and execute projects, evaluation of resource knowledge, and the new challenges of Cyber Security. (author)

Traditional Chinese medicine information digitalization discussion.

Science.gov (United States)

Xie, Qi; Cui, Meng; Wu, Zhen-Dou; Zhao, Hong

2010-11-01

With the rapid development of information science, the ancient Traditional Chinese Medicine is combining with it rapidly, and forming a new discipline: Traditional Chinese Medicine (TCM) Informatics. TCM information digitalization is the process of digital processing, which uses modern information technology to obtain, process, store, and analyze TCM-related data, information, and knowledge. It gathers research, application development, and service in an integrated whole. This article systematically analyzes the key research issues of TCM informatics (e.g., on data resources, data standard, data system construction). Also, the methodology and technology of TCM information digitalization research are thoroughly discussed. The starting point of the research on traditional Chinese medical information digitalization was in question. The research from the current study research was drawn from collected information that was stored, transferred, and utilized. This process helped to place an emphasis on the topic, as well as extending its research areas. In addition, an innovative TCM information virtual study center was set up to support a great deal of fundamental work.

A State-of-the-Art Report on Technologies of Volume Reduction and Self-Disposal for Large Metal Wastes including the Steam Generator of Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Kune Woo; Choi, W. K.; Kim, G. Y.

2009-06-01

This report focuses on technologies of volume reduction and self-disposal for large metal wastes including the steam generator of nuclear power plants. This report consists of the cases of treatments and foreign and domestic technologies for steam generator replacement

Focus on Learning and Technology.

Science.gov (United States)

Kalkowski, Marsha A.

2001-01-01

Discusses results of a survey of Nebraska high school journalism teachers, their use of technology and their attitudes towards it. Discusses concerns about balancing technology and its uses and demands with the teaching of good writing and good journalism practices. Discusses negative scanners, buying a digital camera, and new image-editing…

Further Classification and Methodological Considerations of Evaluations for Online Discussion in Instructional Settings

Science.gov (United States)

Spatariu, Alexandru; Winsor, Denise L.; Simpson, Cynthia; Hosman, Eric

2016-01-01

With the rapid advancements of technology, online communication in both K-12 and post-secondary instruction has been widely implemented. Instructors as well as researchers have used various frameworks to evaluate different aspects of online discussions' quality. The online discussions take place synchronously or asynchronously in chat rooms,…

Reusable Launch Vehicle Technology Program

Science.gov (United States)

Freeman, Delma C., Jr.; Talay, Theodore A.; Austin, R. Eugene

1997-01-01

Industry/NASA reusable launch vehicle (RLV) technology program efforts are underway to design, test, and develop technologies and concepts for viable commercial launch systems that also satisfy national needs at acceptable recurring costs. Significant progress has been made in understanding the technical challenges of fully reusable launch systems and the accompanying management and operational approaches for achieving a low cost program. This paper reviews the current status of the RLV technology program including the DC-XA, X-33 and X-34 flight systems and associated technology programs. It addresses the specific technologies being tested that address the technical and operability challenges of reusable launch systems including reusable cryogenic propellant tanks, composite structures, thermal protection systems, improved propulsion and subsystem operability enhancements. The recently concluded DC-XA test program demonstrated some of these technologies in ground and flight test. Contracts were awarded recently for both the X-33 and X-34 flight demonstrator systems. The Orbital Sciences Corporation X-34 flight test vehicle will demonstrate an air-launched reusable vehicle capable of flight to speeds of Mach 8. The Lockheed-Martin X-33 flight test vehicle will expand the test envelope for critical technologies to flight speeds of Mach 15. A propulsion program to test the X-33 linear aerospike rocket engine using a NASA SR-71 high speed aircraft as a test bed is also discussed. The paper also describes the management and operational approaches that address the challenge of new cost effective, reusable launch vehicle systems.

Development of steam generator manufacturing technology

International Nuclear Information System (INIS)

Grant, J.A.

1979-01-01

In 1968 Babcock and Wilcox (Operations) Ltd., received an order from the CEGB to design, manufacture, install and commission 16 Steam Generators for 2 x 660 Mw (e) Advanced Gas Cooled Reactor Power Station at Hartlepool. This order was followed in 1970 by a similar order for the Heysham Power Station. The design and manufacture of the Steam Generators represented a major advance in technology and the paper discusses the methods by which a manufacturing facility was developed, by the Production Division of Babcock, to produce components to a quality, complexity and accuracy unique in the U.K. commercial boilermaking industry. The discussion includes a brief design background, a description of the Steam Generators and a view of the Production Division background. This is followed by a description of the organisation of the technological development and a consideration of the results. (author)

Casting Technology.

Science.gov (United States)

Wright, Michael D.; And Others

1992-01-01

Three articles discuss (1) casting technology as it relates to industry, with comparisons of shell casting, shell molding, and die casting; (2) evaporative pattern casting for metals; and (3) high technological casting with silicone rubber. (JOW)

Educational technology in medical education.

Science.gov (United States)

Han, Heeyoung; Resch, David S; Kovach, Regina A

2013-01-01

This article aims to review the past practices of educational technology and envision future directions for medical education. The discussion starts with a historical review of definitions and perspectives of educational technology, in which the authors propose that educators adopt a broader process-oriented understanding of educational technology. Future directions of e-learning, simulation, and health information technology are discussed based on a systems view of the technological process. As new technologies continue to arise, this process-oriented understanding and outcome-based expectations of educational technology should be embraced. With this view, educational technology should be valued in terms of how well the technological process informs and facilitates learning, and the acquisition and maintenance of clinical expertise.

MO-E-BRB-00: PANEL DISCUSSION: SBRT/SRS Case Studies - Lung

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-06-15

In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

Addressing the challenges of diagnostics demand and supply: insights from an online global health discussion platform.

Science.gov (United States)

Engel, Nora; Wachter, Keri; Pai, Madhukar; Gallarda, Jim; Boehme, Catharina; Celentano, Isabelle; Weintraub, Rebecca

2016-01-01

Several barriers challenge development, adoption and scale-up of diagnostics in low and middle income countries. An innovative global health discussion platform allows capturing insights from the global health community on factors driving demand and supply for diagnostics. We conducted a qualitative content analysis of the online discussion 'Advancing Care Delivery: Driving Demand and Supply of Diagnostics' organised by the Global Health Delivery Project (GHD) (http://www.ghdonline.org/) at Harvard University. The discussion, driven by 12 expert panellists, explored what must be done to develop delivery systems, business models, new technologies, interoperability standards, and governance mechanisms to ensure that patients receive the right diagnostic at the right time. The GHD Online (GHDonline) platform reaches over 19 000 members from 185 countries. Participants (N=99) in the diagnostics discussion included academics, non-governmental organisations, manufacturers, policymakers, and physicians. Data was coded and overarching categories analysed using qualitative data analysis software. Participants considered technical characteristics of diagnostics as smaller barriers to effective use of diagnostics compared with operational and health system challenges, such as logistics, poor fit with user needs, cost, workforce, infrastructure, access, weak regulation and political commitment. Suggested solutions included: health system strengthening with patient-centred delivery; strengthened innovation processes; improved knowledge base; harmonised guidelines and evaluation; supply chain innovations; and mechanisms for ensuring quality and capacity. Engaging and connecting different actors involved with diagnostic development and use is paramount for improving diagnostics. While the discussion participants were not representative of all actors involved, the platform enabled a discussion between globally acknowledged experts and physicians working in different countries.

Analysis of technological innovation in Danish wind turbine industry - including the Test Station for Windturbines dual roll as research institution and certification authority

International Nuclear Information System (INIS)

Dannemand Andersen, P.

1993-01-01

The overall aim of this thesis is to examine the interactions between the Danish wind turbine industry and the Test Station for Wind Turbines. Because these interactions are concerning technological innovation, it follows that the innovation processes within the enterprises must be analyzed and modelled. The study is carried out as an iterative model-developing process using case study methods. The findings from some less structured interviews are discussed with literature and forms a basis for models and new interviews. The thesis is based on interviews with 20 R and D engineers in the Danish wind turbine industry, 7 engineers at The Test Station and 7 people involved in wind power abroad (American and British). The theoretical frame for this thesis is sociology/organizational theory and industrial engineering. The thesis consists of five main sections, dealing with technology and knowledge, innovation processes, organizational culture, innovation and interaction between the Test Station's research activities and the companies' innovation processes, and finally interaction through the Test Stations certification activity. First a taxonomy for technology and knowledge is established in order to clarify what kind of technology the interactions are all about, and what kind of knowledge is transferred during the interactions. This part of the thesis also contains an analysis of the patents drawn by the Danish wind turbine industry. The analysis shows that the Danish wind turbine industry do not use patents. Instead the nature of the technology and the speed of innovation are used to protect the industry's knowledge. (EG) (192 refs.)

Sinusoids theory and technological applications

CERN Document Server

Kythe, Prem K

2014-01-01

A Complete Treatment of Current Research Topics in Fourier Transforms and Sinusoids Sinusoids: Theory and Technological Applications explains how sinusoids and Fourier transforms are used in a variety of application areas, including signal processing, GPS, optics, x-ray crystallography, radioastronomy, poetry and music as sound waves, and the medical sciences. With more than 200 illustrations, the book discusses electromagnetic force and sychrotron radiation comprising all kinds of waves, including gamma rays, x-rays, UV rays, visible light rays, infrared, microwaves, and radio waves. It also covers topics of common interest, such as quasars, pulsars, the Big Bang theory, Olbers' paradox, black holes, Mars mission, and SETI.The book begins by describing sinusoids-which are periodic sine or cosine functions-using well-known examples from wave theory, including traveling and standing waves, continuous musical rhythms, and the human liver. It next discusses the Fourier series and transform in both continuous and...

Honeycomb technology materials, design, manufacturing, applications and testing

CERN Document Server

Bitzer, Tom

1997-01-01

Honeycomb Technology is a guide to honeycomb cores and honeycomb sandwich panels, from the manufacturing methods by which they are produced, to the different types of design, applications for usage and methods of testing the materials. It explains the different types of honeycomb cores available and provides tabulated data of their properties. The author has been involved in the testing and design of honeycomb cores and sandwich panels for nearly 30 years. Honeycomb Technology reflects this by emphasizing a `hands-on' approach and discusses procedures for designing sandwich panels, explaining the necessary equations. Also included is a section on how to design honeycomb energy absorbers and one full chapter discussing honeycomb core and sandwich panel testing. Honeycomb Technology will be of interest to engineers in the aircraft, aerospace and building industries. It will also be of great use to engineering students interested in basic sandwich panel design.

Ceramic technology for advanced heat engines project

Energy Technology Data Exchange (ETDEWEB)

1990-09-01

The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems in Conservation and Renewable Energy. This project was developed to meet the ceramic technology requirements of the OTT's automotive technology programs. This project is managed by ORNL and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DoD, and industry. Research is discussed under the following topics; Turbomilling of SiC Whiskers; microwave sintering of silicon nitride; and milling characterization; processing of monolithics; silicon nitride matrix; oxide matrix; silicate matrix; thermal and wear coatings; joining; design; contact interfaces; time-dependent behavior; environmental effects; fracture mechanics; nondestructive evaluation; and technology transfer. References, figures, and tables are included with each topic.

STAIF96: space technology and applications international forum. Proceedings

International Nuclear Information System (INIS)

El-Genk, M.S.

1996-01-01

These proceedings represent papers presented at the Space Technology and Applications International Forum-STAIF. STAIF-96 hosted four technical conferences sharing the common interest in space exploration, technology, and commercialization. Topics discussed include space station, space transportation, materials processing in space, commercial forum, space power, commercial space ports, microelectronics, automation of robotics-space application, remote sensing, small business innovative research and communications. There were 243 papers presented at the forum, and 138 have been abstracted for the Energy Science and Technology database. STAIF-96 was partly sponsored by the U.S. Department of Energy

Integrating speech technology to meet crew station design requirements

Science.gov (United States)

Simpson, Carol A.; Ruth, John C.; Moore, Carolyn A.

The last two years have seen improvements in speech generation and speech recognition technology that make speech I/O for crew station controls and displays viable for operational systems. These improvements include increased robustness of algorithm performance in high levels of background noise, increased vocabulary size, improved performance in the connected speech mode, and less speaker dependence. This improved capability makes possible far more sophisticated user interface design than was possible with earlier technology. Engineering, linguistic, and human factors design issues are discussed in the context of current voice I/O technology performance.

Electrical installations technology

CERN Document Server

Whitfield, J F

1968-01-01

Electrical Installations Technology covers the syllabus of the City and Guilds of London Institute course No. 51, the "Electricians B Certificate”. This book is composed of 15 chapters that deal with basic electrical science and electrical installations. The introductory chapters discuss the fundamentals and basic electrical principles, including the concept of mechanics, heat, magnetic fields, electric currents, power, and energy. These chapters also explore the atomic theory of electric current and the electric circuit, conductors, and insulators. The subsequent chapter focuses on the chemis

Advances in control system technology for aerospace applications

CERN Document Server

2016-01-01

This book is devoted to Control System Technology applied to aerospace and covers the four disciplines Cognitive Engineering, Computer Science, Operations Research, and Servo-Mechanisms. This edited book follows a workshop held at the Georgia Institute of Technology in June 2012, where the today's most important aerospace challenges, including aerospace autonomy, safety-critical embedded software engineering, and modern air transportation were discussed over the course of two days of intense interactions among leading aerospace engineers and scientists. Its content provide a snapshot of today's aerospace control research and its future, including Autonomy in space applications, Control in space applications, Autonomy in aeronautical applications, Air transportation, and Safety-critical software engineering.

State of technology of direct contact heat exchanging

Energy Technology Data Exchange (ETDEWEB)

Vallario, R.W.; DeBellis, D.E.

1984-05-01

Specific objectives of this study were to assess the state of technology development and to identify and evaluate the constraints to wider use of direct contact heat exchanger (DCHE) technology in the U.S. The scope of this study is relatively broad; it includes many types of generic systems and end-use applications, both current and future. Domestic and foreign experience with DCHE technology are compared, although the primary focus is on domestic experience. Twenty-two distinct applications of DCHE technology were identified in this study and are examined in this report. The general format is to describe each system, explore its potential applications, discuss current and past research activities and identify major implementation barriers. Finally, as a result of discussions with principal users of DCHE systems and with other knowledgeable sources, generic and specific R and D needs to overcome specific implementation barriers have been identified. The following list of DCHE systems/concepts has been classified into four major end-uses; there is also a category for specialized (other) applications.

Radiation and life: Proceedings of the 8. Nuclear Science and Technology Conference (NST8)

International Nuclear Information System (INIS)

2001-06-01

The 8th conference on nuclear science and technology was held on 21-22 June 2001 in Bangkok. This conference contain paper on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestration tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

Radiation and life: Proceedings of the 8. Nuclear Science and Technology Conference (NST8)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-06-01

The 8th conference on nuclear science and technology was held on 21-22 June 2001 in Bangkok. This conference contain paper on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestration tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed.

Review of nonconventional bioreactor technology

Energy Technology Data Exchange (ETDEWEB)

Turick, C.E.; Mcllwain, M.E.

1993-09-01

Biotechnology will significantly affect many industrial sectors in the future. Industrial sectors that will be affected include pharmaceutical, chemical, fuel, agricultural, and environmental remediation. Future research is needed to improve bioprocessing efficiency and cost-effectiveness in order to compete with traditional technologies. This report describes recent advances in bioprocess technologies and bioreactor designs and relates them to problems encountered in many industrial bioprocessing operations. The primary focus is directed towards increasing gas and vapor transfer for enhanced bioprocess kinetics as well as unproved by-product separation and removal. The advantages and disadvantages of various conceptual designs such as hollow-fiber, gas-phase, hyperbaric/hypobaric, and electrochemical bioreactors are also discussed. Specific applications that are intended for improved bioprocesses include coal desulfurization, coal liquefaction, soil bioremediation, biomass conversion to marketable chemicals, biomining, and biohydrometallurgy as well as bioprocessing of gases and vapors.

Public Energy Education: Issues for Discussion. Draft.

Science.gov (United States)

Public Energy Education Task Force.

This paper was intended to stimulate discussion of energy education issues at a conference on energy issues. The discussion ranges through numerous topics at issue in energy education including public energy awareness, definition of public education, the distinction between public education and public relations, and the presentation of a model…

Blended e-learning Design: Discussion of Cultural Issues

OpenAIRE

Ahmed A Al-Hunaiyyan; Salah AL-Sharhan; Nabeel Al-Huwail

2008-01-01

Blended e-learning is becoming an educational issue especially with the new development of e-learning technology and globalization. Educators as the question: can we design these systems to accommodate different cultural groups and various learning strategies. This paper addresses some design issues when selecting a blended e-learning approach; it discusses some cultural elements that affect the design of blended e-learning. The paper also explores issues related to learning design, then emph...

Adaptive Optics Technology for High-Resolution Retinal Imaging

Science.gov (United States)

Lombardo, Marco; Serrao, Sebastiano; Devaney, Nicholas; Parravano, Mariacristina; Lombardo, Giuseppe

2013-01-01

Adaptive optics (AO) is a technology used to improve the performance of optical systems by reducing the effects of optical aberrations. The direct visualization of the photoreceptor cells, capillaries and nerve fiber bundles represents the major benefit of adding AO to retinal imaging. Adaptive optics is opening a new frontier for clinical research in ophthalmology, providing new information on the early pathological changes of the retinal microstructures in various retinal diseases. We have reviewed AO technology for retinal imaging, providing information on the core components of an AO retinal camera. The most commonly used wavefront sensing and correcting elements are discussed. Furthermore, we discuss current applications of AO imaging to a population of healthy adults and to the most frequent causes of blindness, including diabetic retinopathy, age-related macular degeneration and glaucoma. We conclude our work with a discussion on future clinical prospects for AO retinal imaging. PMID:23271600

Innovation in surgical technology and techniques: Challenges and ethical issues.

Science.gov (United States)

Geiger, James D; Hirschl, Ronald B

2015-06-01

The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation. Copyright © 2015 Elsevier Inc. All rights reserved.

The Deming Method: Systems Theory for Educational Technology Services.

Science.gov (United States)

Richie, Mark L.

1993-01-01

Discusses quality management principles as taught by W. Edwards Deming and describes their applications to educational technology services. Traditional organizational charts are explained; and benefits of using flow charts in Deming's systems are described, including better communications between departments, building teamwork, and opportunities…

Technologies Assessing Limb Bradykinesia in Parkinson's Disease.

Science.gov (United States)

Hasan, Hasan; Athauda, Dilan S; Foltynie, Thomas; Noyce, Alastair J

2017-01-01

The MDS-UPDRS (Movement Disorders Society - Unified Parkinson's Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development.

White paper on science and technology, 1998. In an era of change

International Nuclear Information System (INIS)

1998-01-01

As Part 1, the paper first grasps the present age as an era of change, especially for Japan. Japan is facing a hard time in economy and society, and striving for breaking-through of the stagnation. The paper discusses what is needed by the Japanese people, globe and human, and what science and technology can do for it. As the characters of the system for research community, the paper gives keys 'Look', 'Create', 'Best Use', and 'Evaluate', meaning perspective, result achieving, application of research results, and improving research evaluation systems, respectively, all leading to new creativity. As Part 2, the paper describes the current status of science and technology in Japan and other countries. The contents are R and D expenditures, research personnels, and trends related to research performance, including patents, scientific papers, technology trade, and high-tech industries. As part 3, the paper discusses policies implemented for promoting science and technology. Japan has the Science and Technology Basic Plan settled in July 1996, and is developing comprehensive and systematic policies, including researcher security and R and D system improvement, R and D infrastructure, R and D funds, private-sector R and D, international exchange, regional R and D, and science and technology education. The paper mentions also promotion of research activities. (M.M.)

Managing Technological Change in Libraries and Information Services.

Science.gov (United States)

Klobas, Jane E.

1990-01-01

Examines factors to be considered in the management of technological change in libraries and information services. The organizational climate for change is discussed, and factors to consider when developing a strategy for introducing a new product, service, or system are described, including leadership, goals, political processes, marketing, and…

Report on technological trend survey in fiscal 2000. Survey on bio-technology development strategy; 2000 nendo gijutsu doko nado chosa hokokusho. Bio technology gijutsu kaihatsu senryaku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Survey and research have been performed on bio-technologies as to their seeds of technological development projects to be worked on by the government from the viewpoint of industrial utilization technologies. In the survey on the trends of research and development and technological development on human-genomes, the survey has been done on the status of execution in the Millennium Genome Project, and how the works related to human-genomes are done at the bio-related government based research organizations and the private sector research organizations. Trends related to the human-genome research in overseas countries were also surveyed. With regard to the future prospect of research and development in the post genome age, discussions were given on the result of the questionnaire survey on opinion leaders in the industrial, governmental and academic areas. In discussing the viewpoint of the industrial utilization technologies related to human genomes, candidates assumed usable in the genome related application fields were discussed, and a basic framework of a technological map was prepared. Based on the results thereof, the technological development areas anticipated to be important in the future were extracted, and the technological development themes were discussed. (NEDO)

3rd International Conference on Computer & Communication Technologies

CERN Document Server

Bhateja, Vikrant; Raju, K; Janakiramaiah, B

2017-01-01

The book is a compilation of high-quality scientific papers presented at the 3rd International Conference on Computer & Communication Technologies (IC3T 2016). The individual papers address cutting-edge technologies and applications of soft computing, artificial intelligence and communication. In addition, a variety of further topics are discussed, which include data mining, machine intelligence, fuzzy computing, sensor networks, signal and image processing, human-computer interaction, web intelligence, etc. As such, it offers readers a valuable and unique resource.

ONLINE-SERVICES AND INFORMATION TECHNOLOGIES IN DISTANCE LEARNING

Directory of Open Access Journals (Sweden)

U. A. Vishniakou

2017-01-01

Full Text Available The article deals with the analysis of distance learning (DL methods, approaches, technologies, tools, the use as known online services so and developing the new ones. The terminology in area of DL is discussed and differences between correspondence course and DL are done. The development tendencies of distance learning are analyzed. Their technical and organization components are done. The course programs for DL are realizing by software which functions are shown. The typical lines of DL, their advances and lacks are conceded. As DL advances are self activity, individuality, independence and so on. As DL lacks are insufficiently individual, psychological, practical aspects, writing forms of DL and so on.Technologies and organization of DL including IT are discussed. The tutor activity is divided on two stages: decision of methodological, organizational problems and realization of distance courses. The various kind of online services in DL such as chats, web, TV, video conferences multimedia, robot learning, web-services are shown. Such IT for DL as CD, net, TV, satellite, cloud are discussed.The models of integration decisions for DL development such as Remote Procedure Calls (RPS, Enterprise Application Integration (EAL, Web-Services (WS, Enterprise Service Bus (ESB are proposed. The content of e-learning online services including intellectual technologies and cloud computing are done. As new one integration method for DL is Semantic Web and Web-service (SWWS with knowledge representation support on ontology base and knowledge processing on agents support are representation.

The role of surgeons in identifying emerging technologies for health technology assessment.

Science.gov (United States)

Stafinski, Tania; Topfer, Leigh-Ann; Zakariasen, Ken; Menon, Devidas

2010-04-01

Health technology assessment (HTA) is a tool intended to help policy-makers decide which technologies to fund. However, given the proliferation of new technologies, it is not possible to undertake an HTA of each one before it becomes funded. Consequently, "horizon-scanning" processes have been developed to identify emerging technologies that are likely to have a substantial impact on clinical practice. Although the importance of physicians in the adoption of new technologies is well recognized, their role in horizon scanning in Canada has been limited. The purpose of this project was to pilot an approach to engage physicians, specifically surgeons, in provincial horizon-scanning activities. We invited 18 surgeons from Alberta's 2 medical schools to a horizon-scanning workshop to solicit their views on emerging technologies expected to impact surgical practice within the next 5 years and/or the importance of different attributes or characteristics of new technologies. Surgeons, regardless of specialty, identified developments designed to enhance existing minimally invasive surgical techniques, such as endoscopic, robotic and image-guided surgery. Several nonsurgical areas, including molecular genetics and nano technology, were also identified. Of the 13 technology attributes discussed, safety or risk, effectiveness and feasibility were rated as most important. Lastly, participating surgeons expressed an interest in becoming further involved in local HTA initiatives. Surgeons, as adopters and users of health technologies, represent an important and accessible information source for identifying emerging technologies for HTA. A more formal, ongoing relationship between the government, HTA and surgeons may help to optimize the use of HTA resources.

Bringing Technology to Students’ Proximity: A Sociocultural Account of Technology-Based Learning Projects

Directory of Open Access Journals (Sweden)

Evode Mukama

2014-12-01

Full Text Available This paper depicts a study carried out in Rwanda concerning university students who participated in a contest to produce short documentary films. The purpose of this research is to conceptualize these kinds of technology-based learning projects (TBLPs through a sociocultural perspective. The methodology included focus-group discussions and field notes to collect empirical data. The findings reveal that the more educational technologies capture objects of learning positioned in the students’ sociocultural proximity, the more focused the learners’ attention is on these objects. The study shows also that a change in learning projects may depend to a large extent on whether the technology relates to the students’ sociocultural proximity, that is, taking into consideration students’ physical, cultural, and contextual real world. The study recommends a community of learning/inquiry embedded in a collaborative, problem-solving dynamic involving cognitive support from peers, teachers, external specialists, and the wider community.

Unlocking the atom : the Canadian book on nuclear technology

International Nuclear Information System (INIS)

Tammemagi, H.; Jackson, D.

2002-01-01

This book describes Canada's role in developing a world-class reactor, medical isotope and food irradiation systems and it's leading role in uranium mining. It gives an introduction to both natural and man-made radiation and covers the spectrum of nuclear technology that includes power reactors, nuclear safety, nuclear waste, medicine, uranium, fusion, industrial and research applications. The second chapter in this book introduces the reader to nuclear fission, the fission reactor, nuclear weapons and the Candu Nuclear Power Reactor. The third chapter familiarizes the reader with different types of natural and man-made radiations. The fourth chapter discusses the biological effects of radiation. Electricity and the different technologies to produce electrical power are the subject of chapter five. The Candu reactor and the various Candu designs and performance are discussed in some detail in chapter six. In chapter seven the authors discuss the different types of reactors that have been constructed worldwide. Nuclear safety and nuclear regulations are the subject of chapter eight. In chapter nine the authors discuss nuclear power and the environment. High-level nuclear waste and nuclear waste disposal are discussed in chapter ten. Diagnostic and therapeutic nuclear medicine is the subject of chapter eleven. The benefits of nuclear technology in industry and science are discussed in chapter twelve. Uranium mining and uranium as the nuclear fuel are discussed in chapter thirteen. Chapter fourteen discusses the future of fission with respect to advanced Candu fuel cycles and advanced Candu reactor designs. Chapter fifteen is a discussion of nuclear fusion and Canada's role in fusion research. Chapter sixteen discusses nuclear science and research and the role of the National nuclear laboratory and the universities

Hands Deliverable 4.1.5: Evaluation of Prototype 2 - as seen from the perspective of persuasive technology

DEFF Research Database (Denmark)

Schärfe, Henrik; Aagaard, Morten; Øhrstrøm, Peter

2011-01-01

This document presents the results of the evaluation and testing of the HANDS ICT Tool Prototype 2 from the perspective of persuasive technology. It includes a presentation and a discussion of an evaluation based on a number of user interviews. It also includes an analysis and a discussion of the...

Presentations of the PTAC driving safety technology forum

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

Issues concerning road safety and driver training in relation to the petroleum industry were the focus of this conference. The results of a driving safety survey from the Petroleum Technology Alliance Canada were presented. High risk driver identification methods were discussed along with coaching case studies, including details of continuous and advanced driver training by various industry members. Road hazard analysis was discussed as an effective means of reducing vehicular incidents. The dangers posed by cell phones were reviewed, as well as issues concerning motor vehicle event data recorders and personal privacy. The safety aspects of global positioning system (GPS) enabled fleet management systems were evaluated. Tactical plans for Alberta's traffic collision fatality and injury reduction strategy were examined. An overview of the Schlumberger Canada Driving Program was presented. The systems and processes used within Halliburton Canada to reinforce safe driving behaviors were reviewed. Real time personnel monitoring was discussed, as well as various asset management technologies. It was suggested that new communications technologies for mobile resource management can improve oilfield fleet safety and productivity. The forum featured 12 presentations, of which 8 have been catalogued separately for inclusion in this database.

Quantifying the value of E and P technology

International Nuclear Information System (INIS)

Heinemann, R.F.; Donlon, W.P.; Hoefner, M.L.

1996-01-01

A quantitative value-to-cost analysis was performed for the upstream technology portfolio of Mobil Oil for the period 1993 to 1998, by quantifying the cost of developing and delivering various technologies, including the net present value from technologies applied to thirty major assets. The value captured was classified into four general categories: (1) reduced capital costs, (2) reduced operating costs, (3) increased hydrocarbon production, and (4) increased proven reserves. The methodology used in quantifying the value-to-cost of upstream technologies and the results of asset analysis were described, with examples of value of technology to specific assets. A method to incorporate strategic considerations and business alignment to set overall program priorities was also discussed. Identifying and quantifying specific cases of technology application on an asset by asset basis was considered to be the principal advantage of using this method. figs

The Virtual Learning Commons: An Emerging Technology for Learning About Emerging Technologies

Science.gov (United States)

Pennington, D. D.; Del Rio, N.; Fierro, C.; Gandara, A.; Garcia, A.; Garza, J.; Giandoni, M.; Ochoa, O.; Padilla, E.; Salamah, S.

2013-12-01

The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of semantic, visualization, and social media tools that support knowledge sharing and innovation across research disciplines. The explosion of new scientific tools and techniques challenges the ability of researchers to be aware of emerging technologies that might benefit them. Even when aware, it can be difficult to understand enough about emerging technologies to become potential adopters or re-users. Often, emerging technologies have little documentation, especially about the context of their use. The VLC tackles this challenge by providing mechanisms for individuals and groups of researchers to collectively organize Web resources through social bookmarking, and engage each other around those collections in order to a) learn about potentially relevant technologies that are emerging; and b) get feedback from other researchers on innovative ideas and designs. Concurrently, developers of emerging technologies can learn about potential users and the issues they encounter, and they can analyze the impact of their tools on other projects. The VLC aims to support the 'fuzzy front end' of innovation, where novel ideas emerge and there is the greatest potential for impact on research design. It is during the fuzzy front end that conceptual collisions across disciplines and exposure to diverse perspectives provide opportunity for creative thinking that can lead to inventive outcomes. This presentation will discuss the innovation theories that have informed design of the VLC, and hypotheses about the flow of information in virtual settings that can enable the process of innovation. The presentation will include a brief demonstration of key capabilities within the VLC that enable learning about emerging technologies, including the technologies that are presented in this session.

Discussion Graphs

DEFF Research Database (Denmark)

Kiciman, Emre; Counts, Scott; Gamon, Michael

2014-01-01

, time and other confounding factors, few of the studies that attempt to extract information from social media actually condition on such factors due to the difficulty in extracting these factors from naturalistic data and the added complexity of including them in analyses. In this paper, we present......Much research has focused on studying complex phenomena through their reflection in social media, from drawing neighborhood boundaries to inferring relationships between medicines and diseases. While it is generally recognized in the social sciences that such studies should be conditioned on gender...... a simple framework for specifying and implementing common social media analyses that makes it trivial to inspect and condition on contextual information. Our data model—discussion graphs—captures both the structural features of relationships inferred from social media as well as the context...

Gyroscope Technology and Applications: A Review in the Industrial Perspective

Directory of Open Access Journals (Sweden)

Vittorio M. N. Passaro

2017-10-01

Full Text Available This paper is an overview of current gyroscopes and their roles based on their applications. The considered gyroscopes include mechanical gyroscopes and optical gyroscopes at macro- and micro-scale. Particularly, gyroscope technologies commercially available, such as Mechanical Gyroscopes, silicon MEMS Gyroscopes, Ring Laser Gyroscopes (RLGs and Fiber-Optic Gyroscopes (FOGs, are discussed. The main features of these gyroscopes and their technologies are linked to their performance.

Legal Issues in Educational Technology: Implications for School Leaders.

Science.gov (United States)

Quinn, David M.

2003-01-01

Discusses several legal issues involving the use of educational technology: Freedom of speech, regulation of Internet material harmful to minors, student-developed Web pages, harassment and hostile work environment, staff and student privacy, special education, plagiarism, and copyright issues. Includes recommendations for addressing technology…

Effective recordkeeping technologies to manage aging

International Nuclear Information System (INIS)

Dukelow, J.S.; Johnson, A.B. Jr.; Vora, J.P.

1992-10-01

Pacific Northwest Laboratory has investigated the capability of current recordkeeping technology to support aging management. This paper discusses technical issues associated with potential enhancements of nuclear plant records systems--from the perspective of the lessons learned about equipment aging degradation mechanisms and associated surveillance and monitoring techniques during the U. S. Nuclear Regulatory Commission's Nuclear Plant Aging Research Program. The paper considers both the specific types of technical data needed to ensure continued safe operation and the use of new technology to upgrade record systems. Specific topics discussed include: equipment reliability data needed to support the assessment of the impact of aging on the continued operation of the plant; operational history data to support the assessment of residual life of mechanical and structural components and piping; tools for the analysis and trending of equipment reliability data and operational history data; design and implementation of plant record systems that will provide a comprehensive and usable engineering design basis for the plant; proposed improvements in the data input process for the plant records system; computerization of plant records systems, including conversion of existing records into machine-readable forms

Effective recordkeeping technologies to manage aging

Energy Technology Data Exchange (ETDEWEB)

Dukelow, J.S.; Johnson, A.B. Jr. (Pacific Northwest Lab., Richland, WA (United States)); Vora, J.P. (Nuclear Regulatory Commission, Washington, DC (United States))

1992-10-01

Pacific Northwest Laboratory has investigated the capability of current recordkeeping technology to support aging management. This paper discusses technical issues associated with potential enhancements of nuclear plant records systems--from the perspective of the lessons learned about equipment aging degradation mechanisms and associated surveillance and monitoring techniques during the U. S. Nuclear Regulatory Commission's Nuclear Plant Aging Research Program. The paper considers both the specific types of technical data needed to ensure continued safe operation and the use of new technology to upgrade record systems. Specific topics discussed include: equipment reliability data needed to support the assessment of the impact of aging on the continued operation of the plant; operational history data to support the assessment of residual life of mechanical and structural components and piping; tools for the analysis and trending of equipment reliability data and operational history data; design and implementation of plant record systems that will provide a comprehensive and usable engineering design basis for the plant; proposed improvements in the data input process for the plant records system; computerization of plant records systems, including conversion of existing records into machine-readable forms.

Effective recordkeeping technologies to manage aging

Energy Technology Data Exchange (ETDEWEB)

Dukelow, J.S.; Johnson, A.B. Jr. [Pacific Northwest Lab., Richland, WA (United States); Vora, J.P. [Nuclear Regulatory Commission, Washington, DC (United States)

1992-10-01

Pacific Northwest Laboratory has investigated the capability of current recordkeeping technology to support aging management. This paper discusses technical issues associated with potential enhancements of nuclear plant records systems--from the perspective of the lessons learned about equipment aging degradation mechanisms and associated surveillance and monitoring techniques during the U. S. Nuclear Regulatory Commission`s Nuclear Plant Aging Research Program. The paper considers both the specific types of technical data needed to ensure continued safe operation and the use of new technology to upgrade record systems. Specific topics discussed include: equipment reliability data needed to support the assessment of the impact of aging on the continued operation of the plant; operational history data to support the assessment of residual life of mechanical and structural components and piping; tools for the analysis and trending of equipment reliability data and operational history data; design and implementation of plant record systems that will provide a comprehensive and usable engineering design basis for the plant; proposed improvements in the data input process for the plant records system; computerization of plant records systems, including conversion of existing records into machine-readable forms.

Predicting the market penetration of the next generation of coal-fired technologies

International Nuclear Information System (INIS)

Guha, M.K.; McCall, G.W.

1990-01-01

This paper discusses what role clean coal-fired technology will have in future generating capacity based on availability and prices of coal and natural gas, the nuclear option, environmental regulations, limitations of current air pollution control technologies, and economics. The topics of the paper include the need for new electric generating capacity, why coal must remain a source of energy for generating electricity, technology effectiveness and market penetration analysis methodologies, coal-fired technology economic and technical assumptions, cost estimates, and high and low growth scenarios

Clean coal technologies

International Nuclear Information System (INIS)

Aslanyan, G.S.

1993-01-01

According to the World Energy Council (WEC), at the beginning of the next century three main energy sources - coal, nuclear power and oil will have equal share in the world's total energy supply. This forecast is also valid for the USSR which possesses more than 40% of the world's coal resources and continuously increases its coal production (more than 700 million tons of coal are processed annually in the USSR). The stringent environmental regulations, coupled with the tendency to increase the use of coal are the reasons for developing different concepts for clean coal utilization. In this paper, the potential efficiency and environmental performance of different clean coal production cycles are considered, including technologies for coal clean-up at the pre-combustion stage, advanced clean combustion methods and flue gas cleaning systems. Integrated systems, such as combined gas-steam cycle and the pressurized fluidized bed boiler combined cycle, are also discussed. The Soviet National R and D program is studying new methods for coal utilization with high environmental performance. In this context, some basic research activities in the field of clean coal technology in the USSR are considered. Development of an efficient vortex combustor, a pressurized fluidized bed gasifier, advanced gas cleaning methods based on E-beam irradiation and plasma discharge, as well as new catalytic system, are are presented. In addition, implementation of technological innovations for retrofitting and re powering of existing power plants is discussed. (author)

Evolving markets and new end use gas technologies

International Nuclear Information System (INIS)

Overall, J.

1995-01-01

End use gas technologies, and products for residential, commercial, and industrial uses were reviewed, and markets and market drivers needed for end use technologies in the different types of markets were summarized. The range of end use technologies included: gas fireplaces, combination heating/water heating systems, integrated appliance such as heating/ventilation units, gas cooling, and space cooling for commercial markets. The present and future status of each product market was discussed. Growing markets such as cogeneration, and gas turbine technology also received attention, along with regulatory and environmental concerns. The need to be knowledgeable about current market drivers and to introduce new ones, and the evolution of technology were emphasized as means by which the industry will continue to be able to exert a decisive influence on the direction of these markets

Emerging wind energy technologies

DEFF Research Database (Denmark)

Rasmussen, Flemming; Grivel, Jean-Claude; Faber, Michael Havbro

2014-01-01

This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive.......This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive....

Technology and Poultry Welfare

Directory of Open Access Journals (Sweden)

Neila Ben Sassi

2016-10-01

Full Text Available Consideration of animal welfare is essential to address the consumers’ demands and for the long term sustainability of commercial poultry. However, assessing welfare in large poultry flocks, to be able to detect potential welfare risks and to control or minimize its impact is difficult. Current developments in technology and mathematical modelling open new possibilities for real-time automatic monitoring of animal welfare and health. New technological innovations potentially adaptable to commercial poultry are appearing, although their practical implementation is still being defined. In this paper, we review the latest technological developments with potential to be applied to poultry welfare, especially for broiler chickens and laying hens. Some of the examples that are presented and discussed include the following: sensors for farm environmental monitoring, movement, or physiological parameters; imaging technologies such as optical flow to detect gait problems and feather pecking; infrared technologies to evaluate birds’ thermoregulatory features and metabolism changes, that may be indicative of welfare, health and management problems. All these technologies have the potential to be implemented at the commercial level to improve birds’ welfare and to optimize flock management, therefore, improving the efficiency of the system in terms of use of resources and, thus, long term sustainability.

Technology and Poultry Welfare

Science.gov (United States)

Ben Sassi, Neila; Averós, Xavier; Estevez, Inma

2016-01-01

Consideration of animal welfare is essential to address the consumers’ demands and for the long term sustainability of commercial poultry. However, assessing welfare in large poultry flocks, to be able to detect potential welfare risks and to control or minimize its impact is difficult. Current developments in technology and mathematical modelling open new possibilities for real-time automatic monitoring of animal welfare and health. New technological innovations potentially adaptable to commercial poultry are appearing, although their practical implementation is still being defined. In this paper, we review the latest technological developments with potential to be applied to poultry welfare, especially for broiler chickens and laying hens. Some of the examples that are presented and discussed include the following: sensors for farm environmental monitoring, movement, or physiological parameters; imaging technologies such as optical flow to detect gait problems and feather pecking; infrared technologies to evaluate birds’ thermoregulatory features and metabolism changes, that may be indicative of welfare, health and management problems. All these technologies have the potential to be implemented at the commercial level to improve birds’ welfare and to optimize flock management, therefore, improving the efficiency of the system in terms of use of resources and, thus, long term sustainability. PMID:27727169

2nd International Workshop on Learning Technology for Education in Cloud

CERN Document Server

Tao, Yu-Hui; Yang, Hsin-Chang; Ting, I-Hsien

2014-01-01

Proceedings from the 2013 LTEC conference in Kaohsiung,Taiwan. The papers examine diverse aspects of Learning Technology for Education in Cloud environments, including social, technical and infrastructure implications. Also addressed is the question of how cloud computing can be used to design applications to support real time on demand learning using technologies. The workshop proceedings provide opportunities for delegates to discuss the latest research in TEL (Technology Enhanced Learning) and its impacts for learners and institutions, using cloud technolgies.

Applications of induction linac technology to heavy ion fusion

International Nuclear Information System (INIS)

Faltens, A.; Keefe, D.

1977-07-01

Evaluation of the application of heavy ion accelerators to ignite d-t pellets in a thermonuclear reactor is discussed. Accelerator design requirements considered include transport-limited current, beam injection conditions, and pulse bunching and focusing characteristics. The desirability of resonant and non-resonant accelerating structures is comparatively examined. The required power system switch tubes are discussed. It is concluded that heavy ion accelerators could offer a promising solution to the pellet-igniter problem. The advantages pointed out for this approach include electric efficiency greater than 10 percent, the possibility of high repetition rates (1 to 10 Hz), and a mature technological base

Smart Antenna Skins, including Conformal Array, MMICs and Applications

NARCIS (Netherlands)

Bogaart, F.L.M. van den

2000-01-01

Low-cost technologies are presented for future space-borne and airborne SAR systems. These technologies include state-of-the art highly integrated circuits to miniaturise front-end, solutions to lower-cost interconnection technologies, new beamforming aspects and new architectures. The MMICs address

Distal technologies and type 1 diabetes management.

Science.gov (United States)

Duke, Danny C; Barry, Samantha; Wagner, David V; Speight, Jane; Choudhary, Pratik; Harris, Michael A

2018-02-01

Type 1 diabetes requires intensive self-management to avoid acute and long-term health complications. In the past two decades, substantial advances in technology have enabled more effective and convenient self-management of type 1 diabetes. Although proximal technologies (eg, insulin pumps, continuous glucose monitors, closed-loop and artificial pancreas systems) have been the subject of frequent systematic and narrative reviews, distal technologies have received scant attention. Distal technologies refer to electronic systems designed to provide a service remotely and include heterogeneous systems such as telehealth, mobile health applications, game-based support, social platforms, and patient portals. In this Review, we summarise the empirical literature to provide current information about the effectiveness of available distal technologies to improve type 1 diabetes management. We also discuss privacy, ethics, and regulatory considerations, issues of global adoption, knowledge gaps in distal technology, and recommendations for future directions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Uranium resource technology, Seminar 3, 1980

International Nuclear Information System (INIS)

Morse, J.G.

1980-01-01

This conference proceedings contains 20 papers and 1 panel discussion on uranium mining and ore treatment, taking into account the environmental issues surrounding uranium supply. Topics discussed include: the US uranium resource base, the technology and economics of uranium recovery from phosphate resources, trends in preleash materials handling of sandstone uranium ores, groundwater restoration after in-situ uranium leaching, mitigation of the environmental impacts of open pit and underground uranium mining, remedial actions at inactive uranium mill tailings sites, environmental laws governing in-situ solution mining of uranium, and the economics of in-situ solution mining. 16 papers are indexed separately

Science and Technology Policy

DEFF Research Database (Denmark)

Baark, Erik

1996-01-01

This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years.......This paper examines the status of science and technology in Mongolia, and discusses the policy issues which have emerged with the transition to market economy in recent years....

Examining the Effect of Small Group Discussions and Question Prompts on Vicarious Learning Outcomes

Science.gov (United States)

Lee, Yekyung; Ertmer, Peggy A.

2006-01-01

This study investigated the effect of group discussions and question prompts on students' vicarious learning experiences. Vicarious experiences were delivered to 65 preservice teachers via VisionQuest, a Web site that provided examples of successful technology integration. A 2x2 factorial research design employed group discussions and question…

11th International Conference on Computing and Information Technology

CERN Document Server

Meesad, Phayung; Boonkrong, Sirapat

2015-01-01

This book presents recent research work and results in the area of communication and information technologies. The book includes the main results of the 11th International Conference on Computing and Information Technology (IC2IT) held during July 2nd-3rd, 2015 in Bangkok, Thailand. The book is divided into the two main parts Data Mining and Machine Learning as well as Data Network and Communications. New algorithms and methods of data mining asr discussed as well as innovative applications and state-of-the-art technologies on data mining, machine learning and data networking.

HISTORY AND ACCOMPLISHMENTS OF THE US EPA'S SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION (SITE) MONITORING AND MEASUREMENT (MMT) PROGRAM

Science.gov (United States)

This manuscript presents the history and evolution of the U.S. Environmental Protection Agency's (EPA) Superfund Innovative Technology Evaluation (SITE) Monitoring and Measurement Technology (MMT) Program. This includes a discussion of how the fundamental concepts of a performanc...

After Globalization Future Security in a Technology Rich World

Energy Technology Data Exchange (ETDEWEB)

Gilmartin,T J

2001-08-17

Over the course of the year 2000, five workshops were conducted by the Center for Global Security Research at the Lawrence Livermore National Laboratory on threats to international security in the 2015 to 2020 timeframe due to the global availability of advanced technology. These workshops focused on threats that are enabled by nuclear, missile, and space technology; military technology; information technology; bio technology; and geo systems technology. The participants included US national leaders and experts from the Department of Energy National Laboratories; the Department of Defense: Army, Navy, Air Force, Office of the Secretary of Defense, Defense Threat Reduction Agency, and Defense Advanced Research Projects Agency; the Department of State, NASA, Congressional technical staff, the intelligence community, universities and university study centers, think tanks, consultants on security issues, and private industry. For each workshop the process of analysis involved identification and prioritization of the participants' perceived most severe threat scenarios (worst nightmares), discussion of the technologies which enabled those threats, and ranking of the technologies' threat potentials. The threats ranged from local/regional to global, from intentional to unintended to natural, from merely economic to massively destructive, and from individual and group to state actions. We were not concerned in this exercise with defining responses to the threats, although our assessment of each threat's severity included consideration of the ease or difficulty with which it might be executed or countered. At the concluding review, we brought the various workshops' participants together, added senior participant/reviewers with broad experience and national responsibility, and discussed the workshop findings to determine what is most certain or uncertain, and what might be needed to resolve our uncertainties. This paper summarizes the consenses and

Converting MEMS technology into profits

Science.gov (United States)

Bryzek, Janusz

1998-08-01

This paper discusses issues related to transitioning a company from the advanced technology development phase (with a particular focus on MEMS) to a profitable business, with emphasis on start-up companies. It includes several case studies from (primarily) NovaSensor MEMS development history. These case studies illustrate strategic problems with which advanced MEMS technology developers have to be concerned. Conclusions from these case studies could be used as checkpoints for future MEMS developers to increase probability of profitable operations. The objective for this paper is to share the author's experience from multiple MEMS start-ups to accelerate development of the MEMS market by focusing state- of-the-art technologists on marketing issues.

Emerging Therapeutic Enhancement Enabling Health Technologies and Their Discourses: What Is Discussed within the Health Domain?

Science.gov (United States)

Wolbring, Gregor; Diep, Lucy; Yumakulov, Sophya; Ball, Natalie; Leopatra, Verlyn; Yergens, Dean

2013-01-01

So far, the very meaning of health and therefore, treatment and rehabilitation is benchmarked to the normal or species-typical body. We expect certain abilities in members of a species; we expect humans to walk but not to fly, but a bird we expect to fly. However, increasingly therapeutic interventions have the potential to give recipients beyond species-typical body related abilities (therapeutic enhancements, TE). We believe that the perfect storm of TE, the shift in ability expectations toward beyond species-typical body abilities, and the increasing desire of health consumers to shape the health system will increasingly influence various aspects of health care practice, policy, and scholarship. We employed qualitative and quantitative methods to investigate among others how human enhancement, neuro/cognitive enhancement, brain machine interfaces, and social robot discourses cover (a) healthcare, healthcare policy, and healthcare ethics, (b) disability and (c) health consumers and how visible various assessment fields are within Neuro/Cogno/Human enhancement and within the BMI and social robotics discourse. We found that health care, as such, is little discussed, as are health care policy and ethics; that the term consumers (but not health consumers) is used; that technology, impact and needs assessment is absent; and that the imagery of disabled people is primarily a medical one. We submit that now, at this early stage, is the time to gain a good understanding of what drives the push for the enhancement agenda and enhancement-enabling devices, and the dynamics around acceptance and diffusion of therapeutic enhancements. PMID:27429129

Emerging Therapeutic Enhancement Enabling Health Technologies and Their Discourses: What Is Discussed within the Health Domain?

Directory of Open Access Journals (Sweden)

Gregor Wolbring

2013-07-01

Full Text Available So far, the very meaning of health and therefore, treatment and rehabilitation is benchmarked to the normal or species-typical body. We expect certain abilities in members of a species; we expect humans to walk but not to fly, but a bird we expect to fly. However, increasingly therapeutic interventions have the potential to give recipients beyond species-typical body related abilities (therapeutic enhancements, TE. We believe that the perfect storm of TE, the shift in ability expectations toward beyond species-typical body abilities, and the increasing desire of health consumers to shape the health system will increasingly influence various aspects of health care practice, policy, and scholarship. We employed qualitative and quantitative methods to investigate among others how human enhancement, neuro/cognitive enhancement, brain machine interfaces, and social robot discourses cover (a healthcare, healthcare policy, and healthcare ethics, (b disability and (c health consumers and how visible various assessment fields are within Neuro/Cogno/ Human enhancement and within the BMI and social robotics discourse. We found that health care, as such, is little discussed, as are health care policy and ethics; that the term consumers (but not health consumers is used; that technology, impact and needs assessment is absent; and that the imagery of disabled people is primarily a medical one. We submit that now, at this early stage, is the time to gain a good understanding of what drives the push for the enhancement agenda and enhancement-enabling devices, and the dynamics around acceptance and diffusion of therapeutic enhancements.

Game-like Technology Innovation Education

DEFF Research Database (Denmark)

Magnussen, Rikke

2011-01-01

  The aim of this paper is to discuss the first results and methodological challenges and perspectives of designing game-inspired scenarios for implementation of innovation processes into schools' science education. This paper comprises and report on a case study of a game-inspired innovation...... scenario designed for technology education in grades 7 - 9 in Danish schools. In the paper, methodological challenges of doing design-based research into technology innovation education are discussed. The preliminary results from the first studies of a game-inspired technology innovation camp are also...... presented, along with discussions of the future of development of these educational spaces....

WTC. A discussion on built space regeneration

Directory of Open Access Journals (Sweden)

Marina Mihăilă

2013-09-01

Full Text Available Before 9/11 WTC was an international landmark. The definition of the two high-rise buildings identity, their tourist, social, visual and economic significance, disappeared with the destruction of their materiality. As a result, the contemplative visual and unwritten discourse of the Lower Manhattan disappeared together with the architectural, urban, technological essence and also with the philosophy of stability and equilibrium of a prosperous society. At the social-mental level this event triggers a crisis in personal and collective consciences (of the American Nation but also of the Nations, and a crisis of humanity. The architectural - urban and ideas competition organized to select the best urban-social-architectural concept proved to be a difficult task. Not only it had to “fill” a particular place on earth, but it also needed to configure a philosophy of place that would ‘heal” the wounds of the local and international communities, namely the lack of security and prosperity brought on by a no longer hidden technology of aggression bringing cities and communities under threats never experienced before at times of peace. In its first part the article discusses the competition, proposals and the finalized urban project. The particular challenges related to the selection of design in the case of WTC are doubled by a certain complexity related to the institutional arrangements common to most large urban development projects. It is also clear that there is interdependency between the project governance and the project results. These aspects are discussed in the second part of the article.

Suicide Prevention in the Dot Com Era: Technological Aspects of a University Suicide Prevention Program

Science.gov (United States)

Manning, Jessica; VanDeusen, Karen

2011-01-01

Western Michigan University's Suicide Prevention Program utilizes multiple technological components, including an online training course, a Web site, and 2 social networking Web site profiles, as integral aspects of a comprehensive program. This article discusses the development, maintenance, use, and impact of the technological aspects of this…

Manufacturing process applications team (MATEAM). [technology transfer in the areas of machine tools and robots

Science.gov (United States)

1979-01-01

The transfer of NASA technology to the industrial sector is reported. Presentations to the machine tool and robot industries and direct technology transfers of the Adams Manipulator arm, a-c motor control, and the bolt tension monitor are discussed. A listing of proposed RTOP programs with strong potential is included. A detailed description of the rotor technology available to industry is given.

Online discussion forums with embedded streamed videos on distance courses

Directory of Open Access Journals (Sweden)

Vicenc Fernandez

2014-03-01

Full Text Available Existing literature on education and technology has frequently highlighted the usefulness of online discussion forums for distance courses; however, the majority of such investigations have focused their attention only on text-based forums. The objective of this paper is to determine if the embedding of streamed videos in online discussion forums generates educational dialogue and consequently the feedback that students need in a Management Accounting Course. The findings suggest some interesting issues, such as: students prefer text answers except in complex questions, and videos never replace text commentaries and explanations, but rather complement them.

Commercialization of Los Alamos National Laboratory technologies via small businesses. Final report

Energy Technology Data Exchange (ETDEWEB)

Brice, R.; Carton, D.; Rhyne, T. [and others

1997-06-01

Appendices are presented from a study performed on a concept model system for the commercialization of Los Alamos National Laboratory technologies via small businesses. Topics include a summary of information from the joint MCC/Los Alamos technology conference; a comparison of New Mexico infrastructure to other areas; a typical licensing agreement; technology screening guides; summaries of specific DOE/UC/Los Alamos documents; a bibliography; the Oak Ridge National Laboratory TCRD; The Ames Center for Advanced Technology Development; Los Alamos licensing procedures; presentation of slides from monthly MCC/Los Alamos review meetings; generalized entrepreneurship model; and a discussion on receiving equity for technology.

Summary of presentations and discussions

International Nuclear Information System (INIS)

Takeuchi, Mitsuo

2008-01-01

In December 2007, the Forum on Stakeholder Confidence discussed its theme entitled 'Link between research, development and demonstration (RD and D) and stakeholder confidence'. It was remarked that regulators need a technical demonstration to aid in evaluating the safety case. Local stakeholders appreciate the opportunity to visualise technological arrangements. In both cases, demonstration adds to confidence in the feasibility of solutions. Some believe there is an important role for analogues in communication with stakeholders, if handled with integrity. To explore and benchmark current practices, it was decided to hold a topical session at the 9. regular meeting of the FSC on 4 June 2008 regarding the use of analogues for confidence building. The session opened with an introductory presentation by the session rapporteur. This incorporated input provided for the purpose by FSC members in cooperation with their country's representative to the NEA RWMC 'Integration Group on the Safety Case'. Three speakers then presented the various uses of analogues by implementers, regulators and scientists to build their own confidence; a fourth speaker dealt with the experience of using natural analogues in public information. The presentations addressed the use of analogues in the field of geological disposal of high-level waste (HLW) and long-lived intermediate level (ILW-LL) radioactive waste. Then the FSC participants split into two working groups for discussion. The outcome of these discussions was reported in plenary on 6 June 2008 and it was agreed to publish proceedings of the session. The present summary, prepared by the session rapporteur with input from the NEA Secretariat, captures the main points heard in the course of the event. It combines data from the formal presentations and remarks made in discussion. The latter represent viewpoints expressed by a group whose primary focus is not natural analogues but rather stakeholder interests. The summary and viewpoints

Fashion retail innovation: about context, antecedents and outcome in technological change projects

DEFF Research Database (Denmark)

Tambo, Torben

2015-01-01

Fashion retail is recognised for its strong capabilities in product innovation, while also having the potential to improve the governance of technology-based process innovation. This chapter proposes a model perspective in management of technology and innovation, including special requirements...... of fashion retailing. In particular, this chapter discusses the context of fashion retailing understood as product and brand-based characteristics. A case study-based methodology is then used to guide an analysis of antecedents and (expected) outcome of fashion retail innovation. IT-based innovation...... dominates, but innovation is suggested to include a broader scope of technologies. Contrary to innovation maturity models, this chapter proposes to consider innovation as a continuous refinement between dynamic capabilities and absorptive capacity where technologies must be adapted to the special...

The Quandaries of Technology Management-In Search of Danish Contexts

DEFF Research Database (Denmark)

Koch, Christian

1996-01-01

The contribution discusses Management of technology.The specific danish context is SME, labour market flexibility and a network of supporting institutions. Cases of technology management in manufacturing is discussed.......The contribution discusses Management of technology.The specific danish context is SME, labour market flexibility and a network of supporting institutions. Cases of technology management in manufacturing is discussed....

Advances in phage display technology for drug discovery.

Science.gov (United States)

Omidfar, Kobra; Daneshpour, Maryam

2015-06-01

Over the past decade, several library-based methods have been developed to discover ligands with strong binding affinities for their targets. These methods mimic the natural evolution for screening and identifying ligand-target interactions with specific functional properties. Phage display technology is a well-established method that has been applied to many technological challenges including novel drug discovery. This review describes the recent advances in the use of phage display technology for discovering novel bioactive compounds. Furthermore, it discusses the application of this technology to produce proteins and peptides as well as minimize the use of antibodies, such as antigen-binding fragment, single-chain fragment variable or single-domain antibody fragments like VHHs. Advances in screening, manufacturing and humanization technologies demonstrate that phage display derived products can play a significant role in the diagnosis and treatment of disease. The effects of this technology are inevitable in the development pipeline for bringing therapeutics into the market, and this number is expected to rise significantly in the future as new advances continue to take place in display methods. Furthermore, a widespread application of this methodology is predicted in different medical technological areas, including biosensing, monitoring, molecular imaging, gene therapy, vaccine development and nanotechnology.

Traditional methods v. new technologies – dilemmas for dietary assessment in large-scale nutrition surveys and studies

DEFF Research Database (Denmark)

Amoutzopoulos, B.; Steer, T.; Roberts, C.

2018-01-01

assessment in population surveys’, was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer...... of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion ‘Traditional methods v. new technologies: dilemmas for dietary......The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses...

Engaging Girls in STEM: A Discussion of Foundational and Current Research on What Works

Science.gov (United States)

Sharma, M.; Peterson, K. A.; Bleacher, L. V.; Smith, D. A.

2012-08-01

This article summarizes a panel discussion with Jolene Jesse (Program Director, NSF Research on Gender in Science and Engineering program) and Laura Migus (Director of Equity & Diversity at the Association of Science Technology Centers) on research related to gender in science, technology, engineering and math (STEM). Moderated by Ms. Karen Peterson from the NSF-funded National Girls Collaborative Project, Dr. Jesse and Ms. Migus discussed foundational and current research on pressing questions about the lack of gender diversity in STEM advanced education and careers, and on strategies the EPO community could employ in designing and implementing programs to encourage more girls and women to engage in STEM for the long term.

HTTR workshop (workshop on hydrogen production technology)

International Nuclear Information System (INIS)

Shiina, Yasuaki; Takizuka, Takakazu

2004-12-01

Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

Optical technology for microwave applications VI and optoelectronic signal processing for phased-array antennas III; Proceedings of the Meeting, Orlando, FL, Apr. 20-23, 1992

Science.gov (United States)

Yao, Shi-Kay; Hendrickson, Brian M.

The following topics related to optical technology for microwave applications are discussed: advanced acoustooptic devices, signal processing device technologies, optical signal processor technologies, microwave and optomicrowave devices, advanced lasers and sources, wideband electrooptic modulators, and wideband optical communications. The topics considered in the discussion of optoelectronic signal processing for phased-array antennas include devices, signal processing, and antenna systems.

Participation and topics of discussion of Spaniards in the digital public sphere

OpenAIRE

Campos-Domínguez, E. (Eva); Calvo, D. (Dafne)

2016-01-01

Since the seventies, in Western democracies, communication technologies and current social networks have attracted academic debate on the ability of these devices to promote an extension of the public sphere. The recent launch of Twitter, as well as other social networks, has produced an extensive discussion about their ability to promote the different dynamics of public participation to the mediated public space. This study seeks to explore the discussion on topics involving Spaniards in the...