Determination of the Main Influencing Factors on Road Fatalities Using an Integrated Neuro-Fuzzy Algorithm

Directory of Open Access Journals (Sweden)

Amir Masoud Rahimi

Full Text Available Abstract This paper proposed an integrated algorithm of neuro-fuzzy techniques to examine the complex impact of socio-technical influencing factors on road fatalities. The proposed algorithm could handle complexity, non-linearity and fuzziness in the modeling environment due to its mechanism. The Neuro-fuzzy algorithm for determination of the potential influencing factors on road fatalities consisted of two phases. In the first phase, intelligent techniques are compared for their improved accuracy in predicting fatality rate with respect to some socio-technical influencing factors. Then in the second phase, sensitivity analysis is performed to calculate the pure effect on fatality rate of the potential influencing factors. The applicability and usefulness of the proposed algorithm is illustrated using the data in Iran provincial road transportation systems in the time period 2012-2014. Results show that road design improvement, number of trips, and number of passengers are the most influencing factors on provincial road fatality rate.

[Analysis of work-related fatigue characteristics and its influencing factors in scientific and technical personnel].

Science.gov (United States)

Yang, Ting; Zhou, Dinglun; Song, Mingying; Lan, Yajia

2015-02-01

To investigate the current status and characteristics of work-related fatigue among scientific and technical personnel and its associated factors, and to provide a scientific basis for further interventions. A cross-sectional survey was conducted in the staff from a single scientific institution, using a self-administered questionnaire. Basic information of participants, Fatigue Scale-14, and Job Content Questionnaire were collected. The prevalence of work-related fatigue among the scientific and technical personnel was 54.6%; work-related fatigue was positively correlated with occupational stress (rs = 0.384, P work-related fatigue included occupational stress profiles, social support, and educational status. A higher risk of work-related fatigue was found in the staff under high stress, compared with those under low stress (OR = 8.5, 95%CI = 3.9∼18.7). Social support served as a protective factor for work-related fatigue, while a higher level of education was correlated with more severe work-related fatigue. Work-related fatigue is common and serious among scientific and technical personnel, especially in those under high stress. Effective interventions according to occupational stress are of great importance to reduce work-related fatigue.

Non-technical factors impacting on the decision making processes in environmental remediation. Influences on the decision making process such as cost, planned land use and public perception

International Nuclear Information System (INIS)

2002-04-01

The IAEA attaches great importance to the dissemination of information that can assist Member States with the development, implementation, maintenance and continuous improvement of systems, programmes and activities that support the nuclear fuel cycle and nuclear applications, including the legacy of past practices and accidents. In response to this, the IAEA has initiated a comprehensive programme of work covering all aspects of environmental remediation: factors important for formulating a strategy for environmental remediation; site characterisation techniques and strategies; assessment of remediation technologies; assessment of technical options for cleanup of contaminated media; post-restoration compliance monitoring; assessment of the costs of remediation measures; remediation of low-level disperse radioactive contaminations in the environment. While this project mainly focus on technological aspects, non-technical factors will be influencing the decision making process in remediation decisively. Often their influence is only tacitly accepted and not explicitly acknowledged by the responsible decision makers. This makes it difficult to trace the decision making process in the event that it has to be revisited. The present publication attempts to make these factors explicit and to present methods to include them consciously into the decision making process

Infrapopliteal Percutaneous Transluminal Balloon Angioplasty: Clinical Results and Influence Factors

Energy Technology Data Exchange (ETDEWEB)

Song, Jang Hyeon; Lee, Seung Jin; Jung, Hye Doo; Lim, Jae Hoon; Chang, Nam Kyu; Yim, Nam Yeol; Kim, Jae Kyu [Dept. of Radiology, Chonnam National University Hospital, Gwangju (Korea, Republic of); Lee, Keun Bae [Dept. of Radiology, Chonnam National University Hospital, Gwangju (Korea, Republic of)

2011-09-15

To assess the efficacy of percutaneous transluminal angioplasty (PTA) in patients with infrapopliteal arterial disease, and to determine the influencing factor for prognosis. A total of 55 patients (60 limbs) with infrapopliteal arterial stenosis or occlusion underwent PTA. Atherosclerotic risk factors, clinical symptoms, TransAtlantic Inter-Society Consensus (TASC) classification, and vascular wall calcification were evaluated before PTA. The number of patent infrapopliteal arteries was estimated, and the outcome was evaluated by symptom relief and limb salvage. Technical success was achieved in 53/60 limbs (88.3%) and 81/93 arteries (87.1%), TASC classification (p = 0.038) and vascular calcification (p = 0.002) influenced on technical failure. During follow-up, 26 of 55 limbs (47%) achieved symptom relief and 42/55 limbs (76%) underwent limb salvage. Non-diabetic patients (9/12, 75%) were superior to diabetic patients (17/43, 40%) in terms of symptom relief (p = 0.024). TASC classification and vascular wall calcification influenced on symptom relief and limb salvage. The number of patent infrapopliteal arteries after PTA influenced symptom relief (p < 0.001) and limb amputation (p = 0.003). PTA in patients with chronic critical limb ischemia is worthwhile as a primary treatment. The influence factors should be considered before PTA, and PTA should be performed in as many involved arteries as possible.

Infrapopliteal Percutaneous Transluminal Balloon Angioplasty: Clinical Results and Influence Factors

International Nuclear Information System (INIS)

Song, Jang Hyeon; Lee, Seung Jin; Jung, Hye Doo; Lim, Jae Hoon; Chang, Nam Kyu; Yim, Nam Yeol; Kim, Jae Kyu; Lee, Keun Bae

2011-01-01

To assess the efficacy of percutaneous transluminal angioplasty (PTA) in patients with infrapopliteal arterial disease, and to determine the influencing factor for prognosis. A total of 55 patients (60 limbs) with infrapopliteal arterial stenosis or occlusion underwent PTA. Atherosclerotic risk factors, clinical symptoms, TransAtlantic Inter-Society Consensus (TASC) classification, and vascular wall calcification were evaluated before PTA. The number of patent infrapopliteal arteries was estimated, and the outcome was evaluated by symptom relief and limb salvage. Technical success was achieved in 53/60 limbs (88.3%) and 81/93 arteries (87.1%), TASC classification (p = 0.038) and vascular calcification (p = 0.002) influenced on technical failure. During follow-up, 26 of 55 limbs (47%) achieved symptom relief and 42/55 limbs (76%) underwent limb salvage. Non-diabetic patients (9/12, 75%) were superior to diabetic patients (17/43, 40%) in terms of symptom relief (p = 0.024). TASC classification and vascular wall calcification influenced on symptom relief and limb salvage. The number of patent infrapopliteal arteries after PTA influenced symptom relief (p < 0.001) and limb amputation (p = 0.003). PTA in patients with chronic critical limb ischemia is worthwhile as a primary treatment. The influence factors should be considered before PTA, and PTA should be performed in as many involved arteries as possible.

Factors Affecting Women Enrolment In Technical Institutions In Tanzania A Case Study Of Arusha Technical College

OpenAIRE

Glory B. Kaaya; Dr. Esther Waiganjo

2015-01-01

Abstract The purpose of this study was to investigate the factors affecting women enrolment in Technical Institutions in Tanzania by focusing on the women. The study examined in detail the factors affecting women enrolment in Technical institutions and Arusha Technical College in particular as well as exploring sexual dynamics within Technical Institutions. Moreover a number of theoretical frameworks were concerned basing on the objectives a case study design was employed involving both qua...

The Negative Influence of the Technical Means on Children's Development

Directory of Open Access Journals (Sweden)

S. Luparenko

2014-02-01

Full Text Available The negative impact of the technical means (computer, TV on children's development is characterized. This negative impact means damage of physical and mental health; lack of positive moral-ethic influence, forming a soulless, spiritless person; children's detachment from real life and their impossibility to realize themselves; increased aggressiveness; disappearance of the components of children subculture; availability (in virtual world of the information which can influence child's development negatively; children's dependence on computer games, Internet-addiction, etc. The recommendations for parents to reduce the negative influence of technical means on children are given.

Technical factors that affect anastomotic integrity following esophagectomy: systematic review and meta-analysis.

Science.gov (United States)

Markar, Sheraz R; Arya, Shobhit; Karthikesalingam, Alan; Hanna, George B

2013-12-01

Due to the significant contribution of anastomotic leak, with its disastrous consequences to patient morbidity and mortality, multiple parameters have been proposed and individually meta-analyzed for the formation of the ideal esophagogastric anastomosis following cancer resection. The purpose of this pooled analysis was to examine the main technical parameters that impact on anastomotic integrity. Medline, Embase, trial registries, and conference proceedings were searched. Technical factors evaluated included hand-sewn versus stapled esophagogastric anastomosis (EGA), cervical versus thoracic EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. The outcome of interest was the incidence of anastomotic leak, for which pooled odds ratios were calculated for each technical factor. No significant difference in the incidence of anastomotic leak was demonstrated for the following technical factors: hand-sewn versus stapled EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. Four randomized, controlled trials comprising 298 patients were included that compared cervical and thoracic EGA. Anastomotic leak was seen more commonly in the cervical group (13.64 %) than in the thoracic group (2.96 %). Pooled analysis demonstrated a significantly increased incidence of anastomotic leak in the cervical group (pooled odds ratio = 4.73; 95 % CI 1.61-13.9; P = 0.005). A tailored surgical approach to the patient's physiology and esophageal cancer stage is the most important factor that influences anastomotic integrity after esophagectomy.

Risk Factors Influencing Construction Procurement Performance in Nigeria

Directory of Open Access Journals (Sweden)

Alhassan Dahiru

2015-08-01

Full Text Available One of the challenges facing construction procurement performance is the failure to determine the risk related factors limiting its success. These risk factors can cause a significant increase in the procurement cost leading to an increase in the overall project cost. The purpose of this study is to identify and evaluate the risk factors influencing construction procurement performance with a view to achieve the overall project performance. The objectives are to establish a relative significance index score for the most important risk factors limiting the procurement performance of the projects. A self administered questionnaire was employed to the construction industry professionals for responses. A total of 78 questionnaires were distributed to these professionals (architects, quantity surveyors, engineers, and contractors but 62 were returned and analyzed using influential index and later ranked in order of importance. Results of the analysis indicate a disparity in terms of ranking of the factors influencing construction procurement performance. Corruption related risk, conflict of interest, ineffective project technical feasibility, and lack of commitment to transparency were found to be the most significant factors limiting construction procurement performance. Communication barriers and unconfidential tender evaluation process were found to be the low weighted risk factors. The findings can serve as a supportive mechanism for risks management in public construction procurement management. Therefore, construction procurement personnel at all levels of government may find this study relevant, while improving construction procurement performance in the country. It is recommended that construction procurement system should be focused on risks related to corruption, conflict of interest, and effective technical feasibility for improving the overall project performance.

Factors of Quality Improvement of the Foreign Language Teaching in Technical University

Directory of Open Access Journals (Sweden)

Ira R. Agasieva

2017-03-01

Full Text Available In the article the problem of quality of teaching and knowledge of the English language has been considered. The factors that influence the improvement of the quality of teaching and knowledge of the English language in a technical college, the use of various methods of enhancing the quality of teaching and knowledge of the English language has been analyzed. It has been distinguished the necessity of taking into account the factors such as emotional maturity of the student, the desire for success, student cognitive style, its consistency and independence.

Ranking factors of an investment in cogeneration: sensitivity analysis ranking the technical and economical factors

International Nuclear Information System (INIS)

Sundberg, Gunnel

2001-01-01

A deregulation of the electricity market in Europe will result in increased competition among the power-producing companies. They will therefore carefully estimate the financial risk in an investment in new power-producing capability. One part of the risk assessment is to perform a sensitivity analysis. This paper presents a sensitivity analysis using factorial design, resulting in an assessment of the most important technical and economical factors affecting an investment in gas turbine combined cycle and a steam cycle fired by wood chips. The study is performed using a simulation model that optimises the operation of existing power plants and potential new investments to fulfil the desired heat demand. The local utility system analysed is a Swedish district heating system with 655 GWh y -1 heat demand. The conclusion is that to understand which of the technical and economical factors affect the investment, it is not sufficient to investigate the parameters of the studied plant, but also the parameters related to the competing plants. Both the individual effects of the factors and the effect of their interaction should be investigated. For the energy system studied the price of natural gas, price of wood chips and investment cost have the major influence on the profitability of the investment. (Author)

What factors influence British medical students' career intentions?

Science.gov (United States)

Ibrahim, Michael; Fanshawe, Angela; Patel, Vanash; Goswami, Karan; Chilvers, Geoffrey; Ting, Michelle; Pilavakis, Yiannis; Rao, Christopher; Athanasiou, Thanos

2014-12-01

The aim of this study was to identify factors that influence career choice in UK medical students. Students at seven institutions were invited to rate how important various factors were on influencing their career choices and how interested they were in pursuing different specialties. The influence of interpersonal relationship networks on career choice was also evaluated. 641 responses were collected. 44% (283) were male, 16% (105) were graduates and 41% (263) were final-year students. For Dermatology (p = 0.009), Paediatrics (p = 0.000), Radiology (p = 0.000), Emergency Medicine (p = 0.018) and Cardiothoracic Surgery (p = 0.000), there was a clear correlation between completing a clinical attachment and an interest in pursuing the specialty. Perceived characteristics of the speciality, individually and in clusters were considered important by specific subgroups of students, such as those interested in surgery. These students considered prestige (p = 0.0003), role models (p = 0.014), financial rewards after training (p = 0.0196) and technical challenge (p = 0.0011) as important factors. Demographics such as sex and age played a significant role in career choice. Interpersonal relationship networks do not have a significant influence on career intentions. This study shows that the career intentions of British medical students are influenced by their undergraduate experience and by the weight they place on different specialty-related factors.

Flying in Clear Skies: Technical Arguments Influencing ANAC Regulations

Directory of Open Access Journals (Sweden)

Marcello Fragano Baird

2014-08-01

Full Text Available Regulatory agencies possess the particularity of being controlled by non-elected politicians whose power is derived from delegations made by incumbent powers. There exists, however, a concern with the creation of institutional mechanisms that permit public participation, thus guaranteeing greater democratization and social control of the regulatory process. One of these participatory mechanisms is the public hearing, which was not given much attention by Brazilian literature on lobbying and interest groups. This article seeks to contribute to fill this gap, focusing on the impact of interest groups acting upon the National Civil Aviation Agency, ANAC. Analyzing comments sent to the public hearings, we identified the commentators and the intensity of their participation, the impact of their efforts as measured by the rate of comment incorporation, and we explained why some comments are incorporated and others are not. We organized an original data base of the comments made at all ANAC public hearings between 2007 and May 2012. We analyzed 518 comments concerning 48 regulations. To test participant influence, we classified the comments by degree of technicality, economic or legal argument, authorship, and request for regulation. To understand the incorporation process, we used regression models through which we presented evidence that a comment's incorporation is directly related to its degree of technicality. Technical comments, which effectively subsidize the resolution, have a higher chance of being incorporated. Even more than corporate power or its force of participation, the technical quality proved to be the main factor for comment incorporation.

Analysis of the Factors Influencing the Technical Efficiency of ...

African Journals Online (AJOL)

The study analyzed the relationship between technical efficiency of women rubber tappers in Rubber Research Institute of Nigeria, Benin City. A total of 60 women were selected through purposive and random sampling techniques and served with a structured interview schedule. Data collected were subjected to ...

Implementing factors on finance information systems: How do they influence usage?

Directory of Open Access Journals (Sweden)

David Kiwana

2018-04-01

Full Text Available Finance information systems (FISs store and provide timely, accurate and consistent financial data for management and decision-making. Many organizations especially in developing world however fail to attain desired success during implementation and usage of the FISs despite the fact that many success factors for implementation have been suggested. This study thus investigated the usage of FISs with the aim of finding out how factors presumed to influence implementation impact usage. The presumed factors included; top management support, effective communication, evaluation of staff performance, technical support, project management, change management program, effectiveness of IT unit and flexibility of consultants. The study focused on universities in Uganda, which is a developing country. Out of the nine factors that were investigated only top management support, technical training and flexibility of consultants exhibited a positive impact with only top management support being significant. The rest of the factors exhibited negative impact and only effective IT unit being significant.

What a Decade of Experiments Reveals about Factors that Influence the Sense of Presence

National Research Council Canada - National Science Library

Youngblut, Christine

2006-01-01

...? Will behavior learned in a virtual-world transfer to a corresponding real scenario? This document reviews what experimental results reveal about technical factors and task characteristics that may influence the sense of presence...

A study on the major influencing factors in decision-making in abnormal radiological situations

International Nuclear Information System (INIS)

Kang, B. W.; Kim, S. K.

2001-01-01

This paper describes the task of the technical advisers within the off-site emergency response organization in nuclear accident. They shall be collected and evaluated all influencing factors relevant in decision-making process. The major influencing objective factors are the results of radiological and economic consequence assessments. However, it is associated with uncertainties in predictions dependent of the phase of the accident. Important other factors emerge from subjective arguments between technical advisers in decision-making process. By theirs different opinions, the decision maker who is lack of experience and knowledge has a much more difficult to make and implement the emergency actions. Therefore, the practically considerations in a concrete emergency situation are timely implemented the emergency actions result from already existing plans. The actual process of decision-making consists in identifying in a iterative process implementing individual actions or a set of combined action

FACTORS INFLUENCING THE LABOUR PRODUCTIVITY IN DAIRY SECTOR IN EU

Directory of Open Access Journals (Sweden)

Radek ZDENĚK

2014-11-01

Full Text Available The most important for the stability of Europe and Czech milk market is to remain competitive in world markets, as the main way for balance on the internal market is based on successful export of dairy products to third countries. Price volatility and environmental sustainability are seen as the most serious current problems in the dairy industry and dairy farming. The aim of this paper is to assess the development of the production and milk prices in the EU and assess the main factors that affect labour productivity. The number of cows per worker is one of the most important factors affecting labour productivity. Effect of prices on labour productivity in monetary expression is not as significant as is usually assumed. The technical equipment of labour should be an important factor influencing the number of cows per worker. The hypothesis that higher technical equipment of labour should create better conditions for higher productivity could be assumed.

Taiwanese Technical Education Teachers' Professional Development: An Examination of Some Critical Factors

Science.gov (United States)

Chang, Jen-Chia; Yeh, Yu-Mei; Chen, Su-Chang; Hsiao, Hsi-Chi

2011-01-01

There is a lack of research in the area of the influence that task autonomy (TA), organizational learning (OL), and group cohesiveness (GC) can have on technical education teachers' innovation of professional development (IOPD). Therefore, this study aimed to probe into the influences of TA, OL, and GC on IOPD by technical education teachers, and…

Disposal of mixed waste: Technical, institutional, and policy factors

International Nuclear Information System (INIS)

Waters, R.D.; Gruebel, M.M.; Letourneau, M.J.; Case, J.T.

1996-01-01

In conjunction with the affected States as part of their interactions required by the Federal Facilities Compliance Act, the Department of Energy has been developing a process for a disposal configuration for its mixed low-level waste (MLLW). This effort, spanning more than two years, has reduced the potential disposal sites from 49 to 15. The remaining 15 sites have been subjected to a performance evaluation to determine their strengths and weaknesses for disposal of MLLW. The process has included institutional and policy factors as well as strictly technical analyses, and technical analyses must be supported by technical analyses, and technical analyses must be performed within a framework which includes some institutional considerations, with the institutional considerations selected for inclusion largely a matter of policy. While the disposal configuration process is yet to be completed, the experience to date offers a viable approach for solving some of these issues. Additionally, several factors remain to be addressed before an MLLW disposal configuration can be developed

Technical change and total factor productivity growth: the case of Chinese provinces

OpenAIRE

Heshmati, Almas; Kumbhakar, Subal C.

2010-01-01

In the literature technical change is mostly assumed to be exogenous and specified as a function of time. However, some exogenous external factors other than time can also affect technical change. In this paper we model technical change via time trend (purely external non-economic) as well as other exogenous (external economic) factors (technology shifters). We define technology index based on the external economic factors which are indicators of ‘technology’. Thus our definition of productio...

Factors influencing sustainability of communally-managed water facilities in rural areas of Zimbabwe

Science.gov (United States)

Kativhu, T.; Mazvimavi, D.; Tevera, D.; Nhapi, I.

2017-08-01

Sustainability of point water facilities is a major development challenge in many rural settings of developing countries not sparing those in the Sub-Saharan Africa region. This study was done in Zimbabwe to investigate the factors influencing sustainability of rural water supply systems. A total of 399 water points were studied in Nyanga, Chivi and Gwanda districts. Data was collected using a questionnaire, observation checklist and key informant interview guide. Multi-Criteria analysis was used to assess the sustainability of water points and inferential statistical analysis such as Chi square tests and Analysis of Variance (ANOVA) were used to determine if there were significant differences on selected variables across districts and types of lifting devices used in the study area. The thematic approach was used to analyze qualitative data. Results show that most water points were not functional and only 17% across the districts were found to be sustainable. A fusion of social, technical, financial, environmental and institutional factors was found to be influencing sustainability. On technical factors the ANOVA results show that the type of lifting device fitted at a water point significantly influences sustainability (F = 37.4, p planning stage of water projects was also found to be critical for sustainability although field results showed passive participation by communities at this critical project stage. Financial factors of adequacy of financial contributions and establishment of operation and maintenance funds were also found to be of great importance in sustaining water supply systems. It is recommended that all factors should be considered when assessing sustainability since they are interrelated.

CONTRIBUTING FACTORS TOWARDS DIFFICULTIES IN GENERATING IDEAS AMONG TECHNICAL STUDENTS

OpenAIRE

Yee Mei Heong

2013-01-01

Idea is a thought or collection of thoughts that are important to decision making and problem solving.  The purpose of this research was to analysis the factors contributing to difficulty in generating ideas among technical students.  A total of 375 technical students from four technical universities in Malaysia were randomly selected as samples.  A set of questionnaires was developed and used as research instrument.  The findings indicated that a total of 319 (85.1%) technical students faced...

Performance-influencing factors in homogeneous groups of top athletes: a cross-sectional study

OpenAIRE

van Ingen Schenau, G.J.; Bakker, F.C.; de Koning, J.J.; de Groot, G.

1996-01-01

Sport scientists have identified many factors as prerequisites for a good athletic performance in various sports. It is not clear whether these factors also influence the best performers in the homogeneous groups of top athletes selected for national teams. In this study, this issue is addressed with members of the Dutch National Junior Speed Skirting Team. A total of 237 different technical, physiological, anthropometrical, and psychological parameters were collected, including many that cor...

The Negative Influence of the Technical Means on Children's Development

OpenAIRE

S. Luparenko

2014-01-01

The negative impact of the technical means (computer, TV) on children's development is characterized. This negative impact means damage of physical and mental health; lack of positive moral-ethic influence, forming a soulless, spiritless person; children's detachment from real life and their impossibility to realize themselves; increased aggressiveness; disappearance of the components of children subculture; availability (in virtual world) of the information which can influence child's develo...

Beyond the learning curve: factors influencing cost reductions in photovoltaics

International Nuclear Information System (INIS)

Nemet, Gregory F.

2006-01-01

The extent and timing of cost-reducing improvements in low-carbon energy systems are important sources of uncertainty in future levels of greenhouse-gas emissions. Models that assess the costs of climate change mitigation policy, and energy policy in general, rely heavily on learning curves to include technology dynamics. Historically, no energy technology has changed more dramatically than photovoltaics (PV), the cost of which has declined by a factor of nearly 100 since the 1950s. Which changes were most important in accounting for the cost reductions that have occurred over the past three decades? Are these results consistent with the notion that learning from experience drove technical change? In this paper, empirical data are assembled to populate a simple model identifying the most important factors affecting the cost of PV. The results indicate that learning from experience, the theoretical mechanism used to explain learning curves, only weakly explains change in the most important factors-plant size, module efficiency, and the cost of silicon. Ways in which the consideration of a broader set of influences, such as technical barriers, industry structure, and characteristics of demand, might be used to inform energy technology policy are discussed

Ranking of biomass pellets by integration of economic, environmental and technical factors

International Nuclear Information System (INIS)

Sultana, Arifa; Kumar, Amit

2012-01-01

Interest in biomass as a renewable energy source has increased recently in response to a need to reduce greenhouse gas (GHG) emissions. The objective of this study is to develop a multi-criteria assessment model and rank different biomass feedstock-based pellets, in terms of their suitability for use in large heat and power generation plants and show the importance of environmental, economical and technical factors in making decision about different pellets. Five pellet alternatives, each produced from a different sustainable biomass feedstock i.e., wood, straw, switchgrass, alfalfa and poultry litter, are ranked according to eleven criteria, using the Preference Ranking Organization Method for Enrichment and Evaluation (PROMETHEE). Both quantitative and qualitative criteria are considered, including environmental, technical and economic factors. Three scenarios, namely base case, environmental and economic, are developed by changing the weight assigned to different criteria. In the base case scenario, equal weights are assigned to each criterion. In the economic and environmental scenarios, more weight is given to the economic and environmental factors, respectively. Based on the PROMETHEE rankings, wood pellets are the best source of energy for all scenarios followed by switchgrass, straw, poultry litter and alfalfa pellets except economic scenario, where straw pellets held higher position than switchgrass pellets. Sensitivity analysis on weights, threshold values, preference function and production cost indicate that the ranking was stable. The ranking in all scenarios remained same when qualitative criteria were omitted from the model; this indicates the stronger influence of quantitative criteria. -- Highlights: ► This study ranks the pellets produced from different biomass feedstocks. ► The ranking of the pellets is based on technical, economical and environmental factors. ► This study uses PROMETHEE method for ranking pellets based on a range of

Influence of scientific-technical literacy on consumers' behavioural intentions regarding new food.

Science.gov (United States)

Rodríguez-Entrena, Macario; Salazar-Ordóñez, Melania

2013-01-01

The application of genetic engineering to agriculture has led to an important and controversial innovation in the food sector, so-called Genetically Modified (GM) food. A great deal of literature has studied cognitive and attitudinal factors conditioning consumers' acceptance of GM food, knowledge being one of the most inconsistent variables. Notwithstanding, some authors suggest closer attention should be paid to "science literacy", even more so than knowledge. This paper studies the potential role of consumer literacy fields - i.e. consumer scientific-technical or social-humanistic literacy - in determining consumer choice behaviour towards GM foods. We analyse the strength of the moderating effects produced by consumer university training in some of the most important factors which influence consumers' innovative product acceptance, such as perceived benefits and risks, attitudes to GM technology, trust in institutions or knowledge. The research is performed in southern Spain, using a variance-based technique called Structural Equation Modelling by Partial Least Squares (PLSs). The results show that perceived benefits and risks play a significant role in shaping behavioural intentions towards GM food, the attitude to GM technology being the main driver of consumers' beliefs about risks and benefits. Additionally, behavioural intentions display some differences between the scientific-technical and social-humanistic literacy fields, the variables of trust in institutions and knowledge registering the most striking differences. Copyright © 2012 Elsevier Ltd. All rights reserved.

Preparing Methods and Its Influencing Factors about Nanoparticles Based on Dendritic Polymer

OpenAIRE

Zhang Jianwei; Li Jeff

2017-01-01

Based on the properties, structure and application of dendritic polymer, this paper analysed the methods of the preparation of nanoparticles using dendritic polymer, detailed preparation process, technical parameters and application effect about a single metal nanoparticles, bimetallic nanoparticles, sulfide and halide nanoparticles. The influencing factors of the preparation about nanoparticles were discussed, including the molecular algebra, the molar ratio of the metal ions to the dendriti...

Influence of organizational factors on performance reliability

International Nuclear Information System (INIS)

Haber, S.B.; O'Brien, J.N.; Metlay, D.S.; Crouch, D.A.

1991-12-01

This is the first volume of a two-volume report. Volume 2 will be published at a later date. This report presents the results of a research project conducted by Brookhaven National Laboratory for the United States Nuclear Regulatory Commission, Office of Nuclear Regulatory Research. The purpose of the project was to develop a general methodology to be use in the assessment of the organizational factors which affect performance reliability (safety) in a nuclear power plant. The research described in this report includes the development of the Nuclear Organization and Management Analysis Concept (GNOMIC). This concept characterizes the organizational factors that impact safety performance in a nuclear power plant and identifies some methods for systematically measuring and analyzing the influence of these factors on safety performance. This report is divided into two parts; Part 1 presents an overview of the development of the methodology, while Part 2 provides more details and a technical analysis of the methodological development. Specifically, the results of two demonstration studies, the feasibility of the methodology, and a specific applications for which the methodology was developed are presented

Factors Influencing of Social Conflict

Directory of Open Access Journals (Sweden)

Suwandi Sumartias

2013-07-01

Full Text Available Social conflicts that occur in several areas in Indonesia lately, one of them is caused by the weakness of law certainty. This is feared to threaten the integration of the Republic of Indonesia. This study aims to determine the factors that affect social conflict in Manis Lor village in Kuningan district. The method used the explanatory quantitative methods, the statistical test Path Analysis. The study population was a formal and informal community leaders (village chief, clergy, and youth, and the people who involved in a conflict in Manis Lor village Kuningan regency. The result shows a There is no significant influence between social identity factors with social conflict anarchist. b There is significant influence between socio-economic factors with social conflict anarchists. c There is no significant influence between the credibility factor anarchist leaders with social conflict. d There is no significant influence between the motive factor with anarchist social conflict. e There is significant influence between personality factors/beliefs with anarchist social conflict. f There is significant influence of behavioral factors anarchist communication with social conflict.

Technical efficiency of potato and dairy farming in mountainous Kazbegi district, Georgia

Directory of Open Access Journals (Sweden)

R. Shavgulidze

2017-03-01

Full Text Available The study employs a stochastic frontier analysis to assess technical efficiency of potato and cheese production and determine socio-economic factors that influence farmers' technical efficiency levels in mountainous Kazbegi district of Georgia. The study found improved feeding to be inversely related with technical inefficiency in cheese production. In potato production, the analysis revealed implementation of the plant protection measures and use of quality seeds to be significant aspects that influence technical efficiency of potato growers.

Influence of admission marks on the academic performance of technical architecture students

OpenAIRE

Gaspar Fàbregas, Kàtia; Núñez Andrés, María Amparo; Rodríguez Jordana, Juan; Jordana Riba, Francisco de Paula

2016-01-01

Traditionally, students from higher training cycle and upper secondary school education access higher technical education with a wide range of access marks in each group. The purpose of this article is to analyse how students’ backgrounds and access marks really influence their success in the first academic year and further evolution to obtain the degree of Technical Architecture. To achieve this aim, the progress of students from different backgrounds was analysed for three acade...

Influence of non-technical policies on choices of waste solidification technologies

International Nuclear Information System (INIS)

Trubatch, S.L.

1987-01-01

This paper describes and discusses non-technical policy considerations which may improperly influence decisions on the solidification of low-level radioactive wastes (''LLW''). These policy considerations are contained principally in several State and Federal statutes which regulate various aspects of LLW disposal. One policy consideration in particular, the unqualified bias in favor of volume reduction, is shown to present a substantial potential for leading to technically suboptimal decisions on the appropriate processes for solidifying LLW. To avoid the unintended skewing of technical decisions by non-technical policy considerations, certain current policies may need to be revised to ensure that the choices of waste treatment, including decisions on solidification, are based primarily on reasonable assurance of adequate protection of public health and safety. This goal may be realized in part by basing any disposal fee structure on more than just LLW volume to include consideration of the waste's activity and its difficulty of confinement

General Adjustment Influence Factor of Malaysian Construction Expatriates Executives Abroad

Directory of Open Access Journals (Sweden)

Zainol Halmi

2016-01-01

Full Text Available The success of Malaysian construction companies creates an opportunity to explore abroad. Past studies have shown that the difficulty of expatriates in adjusting to a new environment is the main aspect that leads to failure of assignments. The success in implementing an overseas assignment does not solely depend on an expatriate’s technical expertise. The adjustment issues such as the interaction with the host nationals, and adaptability to the host country’s culture also exert influence on the assignment. The research was conducted to identify the influence of executive expatriate general adjustment on assignment in host countries. The objective of the study was to identify adjustment influence factors relating to general adjustment abroad. Questionnaires were sent to Malaysian expatriate executives. Sixty four Malaysian expatriate executives from Malaysian construction companies overseas were involved in this study. The findings show interaction, social and living environment influences their adjustment during expatriation. Pre-departure training preparation aspects for expatriates is a good step before their departure to host countries.

The impact of non-discretionary factors on DEA and SFA technical efficiency differences.

Science.gov (United States)

Kontodimopoulos, Nick; Papathanasiou, Nikolaos D; Flokou, Angeliki; Tountas, Yannis; Niakas, Dimitris

2011-10-01

The purpose of this study was to examine if factors of the external operating environment can explain differences in technical efficiency derived from Data Envelopment Analysis (DEA) and Stochastic Frontier Analysis (SFA). In a sample of 124 dialysis facilities, technical efficiency was compared according to ownership, region, years in operation and size. With second-stage Tobit regression, DEA and SFA efficiency was regressed against these environmental factors to determine their potential for predicting technical efficiency, as well as the efficiency differences between the two frontier methods. DEA expectedly generated lower mean efficiency scores than SFA (68.2% vs. 79.4%, P DEA-SFA efficiency differences was explained by environmental factors. This suggests that in addition to market instabilities, luck, and other related phenomena, decision-makers in their effort to determine optimal resource allocation, should point their attention to the potentially useful insight provided by environmental factors.

Influence able and Avoidable Risk Factors for Systemic Air Embolism due to Percutaneous CT-Guided Lung Biopsy: Patient Positioning and Coaxial Biopsy Technique-Case Report, Systematic Literature Review, and a Technical Note

International Nuclear Information System (INIS)

Rott, G.; Boecker, F.

2014-01-01

Following the first case of a systemic air embolism due to percutaneous CT-guided lung biopsy in our clinic we analysed the literature regarding this matter in view of influence able or avoidable risk factors. A systematic review of literature reporting cases of systemic air embolism due to CT-guided lung biopsy was performed to find out whether prone positioning might be a risk factor regarding this issue. In addition, a technical note concerning coaxial biopsy practice is presented. Prone position seems to have relevance for the development and/or clinical manifestation of air embolism due to CT-guided lung biopsy and should be considered a risk factor, at least as far as lesions in the lower parts of the lung are concerned. Biopsies of small or cavitary lesions in coaxial technique should be performed using a hemo static valve.

Human factors influencing decision making

OpenAIRE

Jacobs, Patricia A.

1998-01-01

This report supplies references and comments on literature that identifies human factors influencing decision making, particularly military decision making. The literature has been classified as follows (the classes are not mutually exclusive): features of human information processing; decision making models which are not mathematical models but rather are descriptive; non- personality factors influencing decision making; national characteristics influencing decision makin...

Technical Demand of Commercial Paddy Farmers in the Context of Labor Transfer

OpenAIRE

Feng, Liang-xuan; Qi, Zhen-hong; Tian, Yun; Zhou, Hui

2012-01-01

On the basis of document research, we summed up factors of technical demand of commercial paddy farmers to four aspects: individual characteristics of farmers, natural endowment of resources, factors related to risks, and information factor. Then, we put forward relevant hypotheses. From survey results of 241 farmer households in 4 southwestern provinces (regions), by the binary logistic regression analysis method, we empirically studied influences of the above four factors on technical deman...

Technical efficiency in milk production in underdeveloped production environment of India*.

Science.gov (United States)

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

Pareto analysis of critical factors affecting technical institution evaluation

Directory of Open Access Journals (Sweden)

Victor Gambhir

2012-08-01

Full Text Available With the change of education policy in 1991, more and more technical institutions are being set up in India. Some of these institutions provide quality education, but others are merely concentrating on quantity. These stakeholders are in a state of confusion about decision to select the best institute for their higher educational studies. Although various agencies including print media provide ranking of these institutions every year, but their results are controversial and biased. In this paper, the authors have made an endeavor to find the critical factors for technical institution evaluation from literature survey. A Pareto analysis has also been performed to find the intensity of these critical factors in evaluation. This will not only help the stake holders in taking right decisions but will also help the management of institutions in benchmarking for identifying the most important critical areas to improve the existing system. This will in turn help Indian economy.

[Natural factors influencing sleep].

Science.gov (United States)

Jurkowski, Marek K; Bobek-Billewicz, Barbara

2007-01-01

Sleep is a universal phenomenon of human and animal lives, although the importance of sleep for homeo-stasis is still unknown. Sleep disturbances influence many behavioral and physiologic processes, leading to health complications including death. On the other hand, sleep improvement can beneficially influence the course of healing of many disorders and can be a prognostic of health recovery. The factors influencing sleep have different biological and chemical origins. They are classical hormones, hypothalamic releasing and inhibitory hormones, neuropeptides, peptides and others as cytokines, prostaglandins, oleamid, adenosine, nitric oxide. These factors regulate most physiologic processes and are likely elements integrating sleep with physiology and physiology with sleep in health and disorders.

Critical Success Factors for the Large-Scale Introduction of Grid-Connected Photovoltaic Systems. A survey focusing on the non-technical aspects

International Nuclear Information System (INIS)

Groenendaal, B.J.; De Lange, T.J.; Lako, P.; Van Roosmalen, J.A.M.; Tool, C.J.J.; De Wild-Scholten, M.J.

2000-11-01

The differences in Significance and Status of 15 factors that might be of decisive influence in achieving a large-scale market introduction of grid-connected photovoltaic (PV) systems are analyzed. As a research method the opinions of PV experts and persons involved in the implementation of PV have been surveyed. A questionnaire was sent to about 300 persons all over the world (America, Europe and Asia). The methods applied to analyze the returned questionnaires can be divided into a comparing method (Mann-Whitney test) and ranking methods (Friedman test and the Medal-Classification test). One of the main conclusion is that the ranking of the main critical success factors on Significance shows no large differences between the American and European respondents. The answers from the American and European respondents show that the technical and financial factors are the most Significant: RD and D, technical reliability, financing and cost reduction. The Asian ranking does differ from the American and European ranking. The answers from the Asian respondents show that the international factors: global developments and internationalisation together with specialist knowledge and image are the most Significant success factors. Another main conclusion is that the three regions differ in the ranking of the actual Status of the factors. A comparison of the American ranking with the Asian ranking show the largest differences, whereas Europe is taking an intermediary position. Another interesting observation is that the Status of factors, e.g. internationalisation, global developments and the technical/commercial network, are considered more positive in America, whereas Asia and Europe are more positive about the factors RD and D, image and financing. More specific conclusions show that there is a significant difference in answers between the American and European respondents about the Significance of the factor cost reduction. There is also a significant difference between the

Theoretical difference between impact factor and influence factor

Directory of Open Access Journals (Sweden)

Đilda Pečarić

2010-06-01

Full Text Available Bibliometric constructions of "knowledge maps" and "cognitive structures of science" do not differentiate between impact and influence factors. The difference can be constructedaccording to different meaning and interpretation of the terms reference and citation. Reference is "acknowledgment which one author gives to another", whereas citation is "acknowledgment which one document receives from another". Development of Information Science according to period and subject area is analyzed on the corpus of citation literature retrieved from doctoral dissertations in Information Science from 1978 to 2007 at Croatian universities. The research aim is to indicate the difference between document impact factor and author's influence factor (i.e. reference ability to produce effects on actions, behavior, and opinions of authors of doctoral theses. The influence factor serves to distinguish the key role of cited authors in time and according to the duration of the influence (the average age for cited papers of dominant authors in different periods is between eight and ten years. The difference between linear and interactive communication seems vital for the interpretation of cited half-life, i.e. the attitude of one science community towards used information resources and cognitive heritage. The analyzed corpus of 22,210 citations can be divided into three communication phases according to influence factor criteria: in the phase of dialogue and interactive communication 25% of bibliographic units are cited in the first four years; in the second phase another 25% of units are cited from the fifth to the ninth year; after ten years, in the dominant linear communication phase, approximately 30% of units are cited.

The Influence of Distributed Leadership on Job Stress in Technical and Vocational Education

OpenAIRE

Siva Rabindarang; Khuan Wai Bing; Khoo Yin Yin

2014-01-01

Distributed leadership proposed in the field of leadership studies for the improvement of organizational effectiveness. Job stress is the work situation that can affect the organizational performance. Thus, these studies carried out to measure the influence of distributed leadership on job stress. Studies on distributed leadership and job stress are scarce especially in technical and vocational education. Therefore, the purpose of this study is to determine the influence of distributed leader...

Influence of Psychological Factors on Product Development. Lessons from Aerospace and other Industries

Science.gov (United States)

Kamata, E. S.

2002-10-01

Product development is a major determinant of quality and cost as companies throughout the world struggle to optimize product development processes. Engineering tasks are usually implicitly assumed to be a primarily technical activity, but in reality they feature numerous nontechnical factors as well. This book focuses on the interrelationships of social, technical, and organizational aspects of the product development process. Cases observed in industry and research laboratories are presented and interpreted based on the socio-technical system approach (Emery / Trist) of examining the reciprocal relationship between the technical and the social subsystems. This book is primarily intended for engineering and quality professionals who want to know the limitations of current methods used in product development, to examine the so-called soft factors by means of grounded studies of their effect on R&D performance, not only to acknowledge the influence of soft factors but to actively consider their potential to improve the work environment. Academic researchers of the topic will also find many references and material for advanced courses on project and quality management. In addition to numerous cases from the aerospace industry, its general solution concepts are generalizable to other industries in which the high degree of product complexity necessitates effective interaction among different disciplines. The historical evaluation is neither intended for introductory purposes nor to propose a return to the past, but as a survey of the relevant factors to be applied in present and future projects. The author holds a degree in Electronics Engineering from the Instituto Tecnológico de Aeronautica, Brazil, as well as a PhD in Administration Sciences from the Swiss Federal Institute of Technology in Zurich, Switzerland. He draws on profound academic research as well as a wealth of practical experience in avionics, telecommunications, systems control, and the space industry

Impact of Geotechnical Factors on the Safety of Low Embankment Dams From the Perspective of Technical and Safety Supervision

Directory of Open Access Journals (Sweden)

Kasana Andrej

2015-03-01

Full Text Available Our research deals with a broad spectrum of problems concerning the variability of geotechnical factors and their influence on the safety of the biggest group of dam constructions in Slovakia, i.e., low earthfill dams. Its specific aim is the observation of their risk factors by using our experience and knowledge gained while working in the sector of technical and safety supervision. To achieve the aims of a research thesis, we analyzed 39 low earthfill dams. We performed observations and documented their conditions with the aim of clarifying the risk factors. After an analysis of the information materials that characterize dams and after a statistical analysis of the measurement results in situ, including measurements from technical and safety supervision databases, we performed an analysis by using mathematical modeling to evaluate the safety of the dam constructions. Out of the total number of 39 dam constructions, an analysis of the stability of the dam slopes was performed on 37 dams, and deformation problems were analyzed on 28 of the dams. Filtration problems were analyzed at 26 dams, and a complete evaluation of the intensity of filtration movements was performed on 19 of the constructions.

Demotivating factors influencing rubber production workers

Directory of Open Access Journals (Sweden)

Mohammad Reza Iravani

2012-01-01

Full Text Available Motivation is one of the most important factors influencing workers' productivity. An increase in workers' motivation could add more value to organizations' structure and influence the profitability, significantly. In this paper, we study different factors on demotivating workers using questionnaire consist of various questions. The questionnaire is distributed among some employees who work for rubber production units located in Esfahan, Iran. The results of this survey indicate that discrimination on annual job compensation, entrusting responsibilities and unpleasant relationship with family partner are some of the most important factors influencing employees' motivation. While financial factors play important role on increasing employees' motivation, non-financial factors are considered more important.

Finite element analysis on factors influencing the clamping force in an electrostatic chuck

International Nuclear Information System (INIS)

Wang Xingkuo; Yang Yiyong; Cheng Jia; Wang Kesheng; Sun Yuchun; Cao Minglu; Ji Linhong

2014-01-01

As one of the core components of IC manufacturing equipment, the electrostatic chuck (ESC) has been widely applied in semiconductor processing such as etching, PVD and CVD. The clamping force of the ESC is one of the most important technical indicators. A multi-physics simulation software COMSOL is used to analyze the factors influencing the clamping force. The curves between the clamping force and the main parameters such as DC voltage, electrode thickness, electrode radius, dielectric thickness and helium gap are obtained. Moreover, the effects of these factors on the clamping force are investigated by means of orthogonal experiments. The results show that the factors can be ranked in order of voltage, electrode radius, helium gap and dielectric thickness according to their importance, which may offer certain reference for the design of ESCs. (semiconductor devices)

Factors influencing women's decisions to purchase specific ...

African Journals Online (AJOL)

aimed at identifying the factors that influence women's decisions to purchase specific .... influence of all the factors influencing their decision to purchase a selected .... one free” promotions seemed to have had the greatest influence on this ...

Technical Efficiency of Wet Season Melon Farming

Directory of Open Access Journals (Sweden)

Ananti Yekti

2017-03-01

Full Text Available Melon is one of high-value horticulture commodity which is cultivated widely in Kulon Progo regency. The nature of agricultural products is heavily dependent on the season, so it causes the prices of agricultural products always fluctuated every time. In wet season the price of agricultural products tends to be more expensive. Melon cultivation in wet season provide an opportunity to earn higher profits than in the dry season. The price of agricultural products tends to be more expensive in wet season, thus melon cultivation in wet season prospectively generate high profits. In order to achieve high profitability, melon farming has to be done efficiently. Objective of this study was to 1 determined the factors that influence melon production in wet season 2 measured technical efficiency of melon farming and 3 identified the factors that influanced technical efficiency. Data collected during April – June 2014. Location determined by multistage cluster sampling. 45 samples of farmers who cultivated melon during wet season obtained based on quota sampling technique. Technical efficiency was measured using Cobb-Douglas Stochastic Frontier. The result reveals that 1 land use, quantity of seed, K fertilizer contributed significantly increasing melon production, while N fertilizer decreased melon production significantly 2 technical efficiency indeces ranged from 0.40 to 0.99, with a mean of  0.77; 3 farmer’s experience gave significant influence to technical efficiency of melon farming in wet season.

A study on packaging factors influencing on export development

Directory of Open Access Journals (Sweden)

Mina Mohammadi

2014-10-01

Full Text Available Packaging is an important instrument of commerce and trade in the world, it plays essential role in increasing sales and export and thus it maximizes profits generated in enterprises. Hence, the appropriate packaging for the producer generates necessary incentives for production, partly preserves them against zany opponents, and finally provides the customer with much more variety and choosing the right products. Packaging in fact, is a major contributor to the performance of customer relationship management. This survey determines five packaging factors influencing on export development including communications, infrastructure, awareness, design and technical extraction. Through the implementation of principal component analysis, the effective role of packaging components on exports is measured. Exploratory research model indicates that all five packing components were effective in export development of food industry.

The changing trend and influencing factors of energy efficiency: The case of nine countries

International Nuclear Information System (INIS)

Cui, Qiang; Kuang, Hai-bo; Wu, Chun-you; Li, Ye

2014-01-01

Energy shortage is exacerbated by energy wastage and low efficiency, so energy efficiency has become a popular research topic. However, in most studies, the inputs and outputs of energy efficiency are selected through qualitative analysis and literature review, the rationality is not convincing. In this paper, the inputs and outputs of energy efficiency are calculated by EVA (Economic Value Added method). Number of employees in energy industry, energy consumption amount and energy services amount are chosen as the inputs while CO 2 emissions per capita and industrial profit amount are chosen as the outputs. DEA (Data Envelopment Analysis) and Malmquist index are applied to calculate the energy efficiencies of nine countries during 2008–2012. Each country has different reasons to explain the change of energy efficiency index and more flexible energy development plans should be implemented according to the changing reasons. Then the important influencing factors of energy efficiency are analyzed by Panel Regression Model. The results indicate that technology indices and management indices are the main factors of energy efficiency. Management indices' effect on energy efficiency index is occurred mainly through pure technical efficiency change index. Technology indices' effect on energy efficiency index is occurred mainly through technical progress change index. - Highlights: • The inputs and outputs of energy efficiency are calculated by Economic Value Added method. • Data Envelopment Analysis (DEA) and Malmquist index are used to calculate energy efficiency. • Panel Regression Model is used to identify the important influencing factors of energy efficiency. • Most important task is to upgrade energy technology and enhance management

REGULARITIES OF THE INFLUENCE OF ORGANIZATIONAL AND TECHNOLOGICAL FACTORS ON THE DURATION OF CONSTRUCTION OF HIGH-RISE MULTIFUNCTIONAL COMPLEXES

Directory of Open Access Journals (Sweden)

ZAIATS Yi. I.

2015-10-01

Full Text Available Problem statement. Technical and economic indexes of projects of construction of high-rise multifunctional complexes, namely: the duration of construction works and the cost of building products depends on the technology of construction works and method of construction organization, and on their choice influence the architectural and design, constructional and engineering made decisions. Purpose. To reveal the regularity of influence of organizational and technological factors on the duration of construction of high-rise multifunctional complexes in the conditions of dense city building. Conclusion. To reveal the regularity of the influence of organizational and technological factors (the height, the factor complexity of design of project and and estimate documentation, factor of complexity of construction works, the factor of complexity of control of investment and construction project, economy factor, comfort factor, factor of technology of projected solutions for the duration of the construction of high-rise multifunctional complexes (depending on their height: from 73,5 m to 100 m inclusively; from 100 m to 200 m inclusively allow us to quantitatively assess their influence and can be used in the development of the methodology of substantiation of the expediency and effectiveness of the realization of projects of high-rise construction in condition of compacted urban development, based on the consideration of the influence of organizational and technological aspects.

Review on technical issues influencing the performance of chemical barriers of TRU waste repository

International Nuclear Information System (INIS)

Fujita, Tomonari; Sugiyama, Daisuke; Tsukamoto, Masaki; Yokoyama, Hayaichi

1997-01-01

Studies of technical issues influencing the performance assessment of TRU waste disposal which is occurred from the nuclear fuel reprocessing were reviewed in related to the development of safety analysis method. Especially, the chemical containment was investigated as a key barrier to radionuclide migration. TRU waste including long-lived radionuclides need long-term performance assessment which could be assumed only by the chemical barrier. The description of technical issues concerned with the performance of TRU waste repository has been divided into the following categories: long-term degradation of cementitious materials as engineered barrier for radionuclide migration, effect of colloids, organic macromolecules and organic degradation products on chemical behavior of radionuclides, gas generation by corrosion of metallic wastes, and effects of microbial activity. Preliminary performance assessment indicated that important factors affecting performance of chemical barriers in near-field were the distribution coefficient and the solubility of radionuclides in near-field groundwater. Therefore, it was identified that key issues associated with performance of chemical barrier were evaluation of (a) the long-term change of distribution coefficient of cementitious material through the degradation under repository condition and (b) chemical speciation change of radionuclides such as increase of solubility by the presence of colloidal-size materials. (author)

Shaft Position Influence on Technical Characteristics of Universal Two-Stages Helical Speed Reducers

OpenAIRE

Мilan Rackov; Zeljko Kanovic; Sinisa Kuzmanovic; Ruzica Trbojevic

2005-01-01

Purchasers of speed reducers decide on buying those reducers, that can the most approximately satisfy their demands with much smaller costs. Amount of used material, ie. mass and dimensions of gear unit influences on gear units price. Mass and dimensions of gear unit, besides output torque, gear unit ratio and efficiency, are the most important parameters of technical characteristics of gear units and their quality. Centre distance and position of shafts have significant influence on output t...

Factors associated to performance efficacy of technical-tactical actions in volleyball

Directory of Open Access Journals (Sweden)

William das Neves Salles

2017-05-01

Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2017v19n1p74   The aim of the study was to investigate the factors associated to performance efficacy of technical-tactical actions in volleyball. Based on the protocol of the Instrument for Technical and Tactical Performance Assessment in Volleyball (IAD-VB, 44.025 match actions performed by male and female athletes from u-15, u-16 and u-17 finalist teams of the 2010 Santa Catarina Volleyball Championship in Brazil were observed. Data were analyzed on SPPS 21 software using the logistic regression technique, adopting 5% significance level for the interpretation of results. Adjusted model explained 51.40% efficacy variance, and the factors associated with this variable were decision making, adjustment, efficiency, and competition level.

Encouraging Enrolments by People's Influence; A desperate need for Technical Education Evolution

OpenAIRE

Mahajan, Prashant; Golahit, Suresh

2017-01-01

International audience; — There is a rapid growth of technical education in last decade in terms of the no. of institutes and intake capacity in India but with improper and non-directional development. As per AICTE reports, there is noticeable gap in between the actual no. of enrolments and intake capacity of these institutes. In the year 2015-16, 46% of seats were vacant in Technical Education in India. Segmentation and 'People' factor of service mix is very important aspects in education se...

Factors Influencing Substance Abuse among Undergraduate ...

African Journals Online (AJOL)

The study investigated the factors influencing substance abuse amongundergraduate students in Osun State; Nigeria. A sample of 1, 200undergraduate students were randomly selected from three tertiaryinstitution in Osun State. Factors Influencing Substance Abuse Questionnaire (FISA) was developed by the researcher ...

FACTORS INFLUENCING THE EVOLUTION OF YOUTH TRAVEL

Directory of Open Access Journals (Sweden)

Student Claudia MOISĂ

2010-01-01

Full Text Available Youth travel is an important part of global tourism, consequently, getting to know the evolution of this form of tourism requires an approach of the aspects regarding the permissive and restrictive factors that influence the youth travel dynamic worldwide. In terms of the factors that influence youth travel, we highlighted these two categories of factors (permissive and restrictive and, within each category, we tried to singularize the influence of every factor over youth travel.

[Factors forming opnion on marijuana legalization in Poland among group of students from medical and technical college faculty].

Science.gov (United States)

Suwała, Małgorzata; Gerstenkorn, Andrzej; Szewczyk, Anna

2015-01-01

Marijuana is the most popular illegal drug in the world. In 2010 17.6% of polish adult population (age 15-64) and 37.3% of youth (age 17-18) declared use of marijuana at least once in their lifetime. Recent years in Poland brought back public discussion regarding decriminalization and legalization of marijuana. The main goal of the study was to reveal the opinion about legalization of marijuana in Poland among students of medical and technical faculty in correlation with chosen socio-demographic factors, college major, attitude to tobacco smoking, use of drugs and religious practice. Study included 230 students (110 from Medical University of Lodz and 120 from Technical University of Lodz). Women consisted on 56.1% of surveyed and men on 43.9%. Study used audit survey as a research method. Results. 40.4% of students considered marijuana as "soft" drug and in majority (65.7%) are convinced that it is not addictive. The main part of studied group (83%) claimed that marijuana is easily accessible in Poland. The majority of the group (38.75%) was against marijuana legalization, a little bit less (35.2%) approved its legalization in Poland and 26.1% had no opinion. Type of college faculty had not been detected as a factor influencing support for legalization. Important factors influencing positive opinion on legalization was: living in the city, tobacco smoking, socializing with legalization supporters, lack of regular religious practice, drug use. CONCLUSION. Young people's diversified opinion regarding legalization of marijuana in Poland should encourage further discussion. Educational and preventive activities within different social groups are necessary to form a conscious opinion on legalization of marijuana in Poland based on the knowledge of actual scientific facts.

Non-technical success factors for bioenergy projects—Learning from a multiple case study in Japan

International Nuclear Information System (INIS)

Blumer, Yann B.; Stauffacher, Michael; Lang, Daniel J.; Hayashi, Kiyotada; Uchida, Susumu

2013-01-01

There is wide agreement in the literature that non-technical factors play a decisive role in the successful implementation of bioenergy projects. One underlying reason is that such projects require the involvement of many stakeholders, such as feedstock producers, engineers, authorities and the concerned public. We analyze the role of bioenergy-specific non-technical factors for the success of bioenergy projects. In a broad literature review we first identify potential success factors belonging to the five dimensions project characteristics, policy framework, regional integration, public perception and stakeholders. Using these factors as conceptual framework, we next analyze six Japanese pilot projects for bioenergy utilization supported by Japans Agriculture, Forestry and Fisheries Research Council. We apply Rough Set Analysis, a data mining method that can be used for small sample sizes to identify patterns in a dataset. We find that, by and large, non-technical factors from all five dimensions – such as the stability of the local policy framework – co-occur with project success. Furthermore, we show that there are diverging interpretations as to what success in a bioenergy project means. This requires tradeoffs between various goals, which should be identified and addressed explicitly at early stages of such a project. - Highlights: • We collect a broad list of non-technical success factors for bioenergy projects. • These are applied to six pilot projects in Japan and shown to be relevant. • We acknowledge different aspects of project success and their potential conflicts

The factors that influence job satisfaction among royal Malaysian customs department employee

Science.gov (United States)

Ammar Shafi, Muhammad; Saifullah Rusiman, Mohd; Nor, Maria Elena; Khamis, Azme; Nabilah Syuhada Abdullah, Siti; Syafiq Azmi, Mohd; Sakinah Zainal Abidin, Munirah; Ali, Maselan

2018-04-01

This research aims to spot the factors that influence job satisfaction among Royal Malaysian Customs Department employees. Primary data was used in this research and it was collected from the employees who work in five different departments at Royal Malaysian Customs Department Tower Johor. Those departments were customs department, Internal Taxes, Technical Services, Management and Prevention. The research used stratified random sampling to collect the sample and Structural Equation Modelling (SEM) to measure the relationship between variables using AMOS software. About 127 employees are selected as the respondents from five departments to represent the sample. The result showed that ‘Organizational Commitment’ (p-value = 0.001) has significant and direct effect toward job satisfaction compared to the ‘Stress Condition’ (p-value = 0.819) and ‘Motivation’ factor (p-value = 0.978). It was also concluded that ‘Organizational Commitment’ was the most influential factor toward job satisfaction among Royal Malaysian Customs Department employees at Tower Custom Johor, Johor Bahru.

Bus Rapid Transit system’s influence on urban development: An inquiry to Boston and Seoul BRT systems’ technical characteristics

Science.gov (United States)

Prayogi, Lutfi

2018-03-01

This article explores the relation between bus rapid transit (BRT) system and urban development. This article was written through a multi-staged comprehensive literature review. It includes a general overview of widely acknowledged BRT technical characteristics. It explains the approach taken in understanding the relation between BRT system provision and urban development around the system. Findings regarding the influence of Boston Silver Line 4 and 5 and Seoul BRT systems on urban development around the systems are quoted and used as case studies. Investigation on the technical characteristics of Boston SL4/5 and Seoul BRT systems are provided. This article shows that the two BRT systems that influence urban development around the systems have technical characteristics that enable the BRT systems to have high performance. However, while the quoted BRT systems can influence urban development, they have significantly different performance.

Improving technical information use: what can be learnt from a manager's perspective?

Science.gov (United States)

Jacobson, C; Lisle, A; Carter, R W; Hockings, M T

2013-07-01

Conservation practice reportedly suffers from low use of technical information. Understanding of factors that affect the influence of technical information on management decision-making is limited. We sought to identify leverage points for improved technical information dissemination in the New South Wales Parks and Wildlife Service, Australia, given the significant recent investments in monitoring and evaluation that had been made. We did so by exploring the inter-relationships between factors affecting the influence of different information types on management decisions. Results indicate that managers have a high inclination toward adaptive behavior, given they operate in an information poor environment. The most influential types of information were those that enabled interaction between information provider and recipient (e.g., staff experience and expertise). An analysis of the concordance in individuals' responses for different information types showed that neither accessibility nor organizational expectation of use was aligned with influence on decision-making. Alignment of responses also varied by work area. Raising expectations of information use or increasing access to particular types of information is therefore unlikely to result in an increase in influence on management decision-making. Rather than focussing on matching accessibility and expected use of particular information types, our results indicate that technical information uptake is best supported through existing peer networks tailored to specific work areas.

Technical Efficiency of Potato and Dairy Farming in Mountainous Kazbegi District, Georgia

OpenAIRE

Shavgulidze, R.; Bedoshvili, D.; Aurbacher, J.

2017-01-01

The study employs a stochastic frontier analysis to assess technical efficiency of potato and cheese production and determine socio-economic factors that influence farmers' technical efficiency levels in mountainous Kazbegi district of Georgia. The study found improved feeding to be inversely related with technical inefficiency in cheese production. In potato production, the analysis revealed implementation of the plant protection measures and use of quality seeds to be significant aspects th...

The influence of individual and organisational factors on nurses' behaviour to use lifting devices in healthcare.

Science.gov (United States)

Koppelaar, E; Knibbe, J J; Miedema, H S; Burdorf, A

2013-07-01

This study evaluates the influence of individual and organisational factors on nurses' behaviour to use lifting devices in healthcare. Interviews among nurses were conducted to collect individual characteristics and to establish their behaviour regarding lifting devices use. Organisational factors were collected by questionnaires and walk-through-surveys, comprising technical facilities, organisation of care, and management-efforts. Generalised-Estimating-Equations for repeated measurements were used to estimate determinants of nurses' behaviour. Important determinants of nurses' behaviour to use lifting devices were knowledge of workplace procedures (OR = 5.85), strict guidance on required lifting devices use (OR = 2.91), and sufficient lifting devices (OR = 1.92). Management-support and supportive-management-climate were associated with these determinants. Since nurses' behaviour to use lifting devices is influenced by factors at different levels, studies in ergonomics should consider how multi-level factors impact each other. An integral approach, addressing individual and organisational levels, is necessary to facilitate appropriate implementation of ergonomic interventions, like lifting devices. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The potential impacts of grid-connected distributed generation and how to address them: A review of technical and non-technical factors

International Nuclear Information System (INIS)

Passey, Robert; Spooner, Ted; MacGill, Iain; Watt, Muriel; Syngellakis, Katerina

2011-01-01

Distributed generation is being deployed at increasing levels of penetration on electricity grids worldwide. It can have positive impacts on the network, but also negative impacts if integration is not properly managed. This is especially true of photovoltaics, in part because it's output fluctuates significantly and in part because it is being rapidly deployed in many countries. Potential positive impacts on grid operation can include reduced network flows and hence reduced losses and voltage drops. Potential negative impacts at high penetrations include voltage fluctuations, voltage rise and reverse power flow, power fluctuations, power factor changes, frequency regulation and harmonics, unintentional islanding, fault currents and grounding issues. This paper firstly reviews each of these impacts in detail, along with the current technical approaches available to address them. The second section of this paper discusses key non-technical factors, such as appropriate policies and institutional frameworks, which are essential to effectively coordinate the development and deployment of the different technical solutions most appropriate for particular jurisdictions. These frameworks will be different for different jurisdictions, and so no single approach will be appropriate worldwide. - Highlights: → Distributed generation can have both positive and negative impacts on networks. → Technical solutions to address these negative impacts are discussed. → The required appropriate policies and institutional frameworks are discussed.

Factors Influencing Team Behaviors in Surgery: A Qualitative Study to Inform Teamwork Interventions.

Science.gov (United States)

Aveling, Emma-Louise; Stone, Juliana; Sundt, Thoralf; Wright, Cameron; Gino, Francesca; Singer, Sara

2018-02-07

Surgical excellence demands teamwork. Poor team behaviors negatively affect team performance and are associated with adverse events and worse outcomes. Interventions to improve surgical teamwork focusing on frontline team members' nontechnical skills have proliferated but shown mixed results. Literature on teamwork in organizations suggests that team behaviors are also contingent on psycho-social, cultural and organizational factors. This study examines factors influencing surgical team behaviors in order to inform more contextually sensitive and effective approaches to optimizing surgical teamwork. Qualitative study of cardiac surgical teams in a large US teaching hospital included 34 semi-structured interviews. Thematic network analysis was used to examine perceptions of ideal teamwork and factors influencing team behaviors in the OR. Perceptions of ideal teamwork were largely shared, but team members held discrepant views of which team and leadership behaviors enhanced or undermined teamwork. Other factors impacting team behaviors related to: local organizational culture, including management of staff behavior; variable case demands and team members' technical competence; fitness of organizational structures and processes to support teamwork. These factors affected perceptions of what constituted optimal interpersonal and team behaviors in the OR. Team behaviors are contextually contingent and organizationally determined, and beliefs about optimal behaviors are not necessarily shared. Interventions to optimize surgical teamwork requires establishing consensus regarding best practice, ability to adapt as circumstances require, and organizational commitment to addressing contextual factors that impact teams. Copyright © 2018 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Assessing Influences on Perceived Training Transfer: An Investigation of Perceptions of Air Force Logistics Readiness Officer Technical School Graduates

National Research Council Canada - National Science Library

Hobbs, Sarah E

2005-01-01

.... This research specifically investigates how influences/attitudes/beliefs of LRO technical school graduates regarding their training influence their perceptions about the transfer of such training back to the job...

Productivity Growth-Accounting for Undesirable Outputs and Its Influencing Factors: The Case of China

Directory of Open Access Journals (Sweden)

Junfeng Zhang

2016-11-01

Full Text Available Presently, China’s social development is facing the dilemma of supporting economic growth and reducing emissions. Therefore, it is crucial to analyse productivity growth and examine its relationship with influencing factors in China. This study evaluated the total factor productivity (TFP growth of 30 provinces in China by adopting the Malmquist-Luenberger (ML productivity index and incorporating undesirable outputs from 2011–2014. Then, a Tobit regression model was employed to explore the factors that influence China’s TFP growth. The results show that the average annual growth of the Malmquist-Luenberger productivity index was lower than that of the traditional Malmquist (M productivity index growth during the research period. The findings reveal several key conclusions: First, the true TFP growth in China will be overestimated if undesirable outputs are ignored. Second, technical changes are the main contributor to TFP growth. Third, there are huge regional disparities of productivity growth in China. Fourth, coal intensity, environmental regulations, and industrial structure have significantly negative effects on productivity growth, while real per capita gross domestic product (GDP and foreign direct investment (FDI have strongly positive effects on productivity growth.

Factors influencing knowledge and practice of exclusive ...

African Journals Online (AJOL)

Factors influencing knowledge and practice of exclusive breastfeeding in Nyando ... The overall objective of this study was to determine factors influencing the ... EBF and its benefits), pre lacteal feeds and exclusive breastfeeding consistency.

What Factors Influence States' Capacity to Report Children's Health Care Quality Measures? A Multiple-Case Study.

Science.gov (United States)

Christensen, Anna L; Petersen, Dana M; Burton, Rachel A; Forsberg, Vanessa C; Devers, Kelly J

2017-01-01

Objectives The objective of this study was to describe factors that influence the ability of state Medicaid agencies to report the Centers for Medicare & Medicaid Services' (CMS) core set of children's health care quality measures (Child Core Set). Methods We conducted a multiple-case study of four high-performing states participating in the Children's Health Insurance Program Reauthorization Act (CHIPRA) Quality Demonstration Grant Program: Illinois, Maine, Pennsylvania, and Oregon. Cases were purposively selected for their diverse measurement approaches and used data from 2010 to 2015, including 154 interviews, semiannual grant progress reports, and annual public reports on Child Core Set measures. We followed Yin's multiple-case study methodology to describe how and why each state increased the number of measures reported to CMS. Results All four states increased the number of Child Core Set measures reported to CMS during the grant period. Each took a different approach to reporting, depending on the available technical, organizational, and behavioral inputs in the state. Reporting capacity was influenced by a state's Medicaid data availability, ability to link to other state data systems, past experience with quality measurement, staff time and technical expertise, and demand for the measures. These factors were enhanced by CHIPRA Quality Demonstration grant funding and other federal capacity building activities, as hypothesized in our conceptual framework. These and other states have made progress reporting the Child Core Set since 2010. Conclusion With financial support and investment in state data systems and organizational factors, states can overcome challenges to reporting most of the Child Core Set measures.

Predisposition Factors of Career and Technical Education Transfer Students: A Hermeneutic Phenomenology Study

Science.gov (United States)

Hioki, Warren; Lester, Derek; Martinez, Mario

2015-01-01

Six college students, who were career and technical education (CTE) transfer students in the state of Nevada, were interviewed Spring Semester of 2009. The study used a hermeneutic phenomenology framework as the method to identify those predisposition variables that heavily influenced the students in their decision to transfer to a senior…

Software for automated evaluation of technical and economic performance factors of nuclear power plant units

International Nuclear Information System (INIS)

Cvan, M.; Zadrazil, J.; Barnak, M.

1989-01-01

Computer codes TEP V2, TEP EDU and TEP V1 are used especially in real-time evaluation of technical and economic performance factors of the power unit. Their basic functions include filtration of credibility of input data obtained by measurement, simultaneous calculation of flows of various types of energy, calculation of technical and economic factors, listings and filing of the results. Code ZMEK is designed for executing changes in the calculation constants file for codes TEP V2 and TEP EDU. Code TEP DEN is used in processing the complete daily report on the technical and economic performance factors of the unit. Briefly described are the basic algorithms of credibility filtration for the measured quantities, the methodology of fundamental balances and the method of guaranteeing the continuity of measurement. Experiences are given with the use of the codes, and the trends are outlined of their future development. (J.B.). 5 refs

Factors that influencing veterinary drug’s metabolisation

Directory of Open Access Journals (Sweden)

Cristina, Romeo T.

2007-12-01

Full Text Available The paper wants to make a recall for the vet practitioners, of the main veterinary drug's metabolism rate influencing factors. Among the most important physiological factors (pharmacokinetics, sanguine flow and urinary ones, plasmatic proteins binding, enzymatic induction and inhibition are essential. Between the animal’s bounded factors more important are: species, individuality, age, sex, pregnancy, alimentation, genetic factors, and health status and from exogenous factors, daily rhythm, influences of chemical compounds and of the stress are presented.

Shaft Position Influence on Technical Characteristics of Universal Two-Stages Helical Speed Reducers

Directory of Open Access Journals (Sweden)

Мilan Rackov

2005-10-01

Full Text Available Purchasers of speed reducers decide on buying those reducers, that can the most approximately satisfy their demands with much smaller costs. Amount of used material, ie. mass and dimensions of gear unit influences on gear units price. Mass and dimensions of gear unit, besides output torque, gear unit ratio and efficiency, are the most important parameters of technical characteristics of gear units and their quality. Centre distance and position of shafts have significant influence on output torque, gear unit ratio and mass of gear unit through overall dimension of gear unit housing. Thus these characteristics are dependent on each other. This paper deals with analyzing of centre distance and shaft position influence on output torque and ratio of universal two stages gear units.

Factors influencing customer satisfaction with reference and ...

African Journals Online (AJOL)

This paper examines factors influencing customer satisfaction with reference and information services in an academic environment. The paper identifies types of reference services in libraries, factors influencing customer satisfaction and dissatisfaction with reference and information services and suggested the way forward ...

The Influence of the Technical Condition of a Building on the Property’s Market Value

Directory of Open Access Journals (Sweden)

Ziembicka Beata

2016-12-01

Full Text Available The housed property’s market value is influenced by a set of characteristic qualities, among which is the technical condition of a building. The aim of this paper is to study the influence of the technical condition of a building on the market price of the dwelling units, depending, among others, on the chosen method and the approach to the assessment of the housing wear degree. The analysis has been performed based on the estimation of the market value of an illustrative dwelling unit located in a building erected with the use of prefabricated large panel technology in selected variants. The study is based on data from the period between January and December 2012, which are related to the sale of rights to dwelling units from the secondary market. The information was obtained from a transactional database based on the Partner Data Exchange system with the Walor software.

Factors Influencing Endometrial Thickness in Postmenopausal Women

African Journals Online (AJOL)

Background: Cut‑off values for endometrial thickness (ET) in asymptomatic postmenopausal woman have been standardized. However, there are no comprehensive studies to document how various factors can influence the ET after the age of menopause. Aim: To study the various factors influencing the ET in ...

Factors Influencing Livelihood Diversification among Rural Farmers ...

African Journals Online (AJOL)

This research study was set out to analyze factors influencing rural farmer's engagement in livelihood diversification in the study area. The specific objectives were; to identify the different levels of farmers' engagement in livelihood diversification, determine the socio-demographic factors or forces that influence farmers' ...

A survey of the influencing factors and models for resident's household waste management behavior

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

The problem of household solid waste has been concerned and researched on by municipalities and researchers.At present, household solid waste has been changed to management problem from technical one. From the point view of management, the research on household solid waste is to study the factors which influence resident's behavior of managtng their waste. Based on the literature review, firstly, this paper summarizes those factors which have already been identified to have impact on resident's behavior of managing their waste. They are social-demographic variables,knowledge, environmental values, psychological factors, publicity and system design. Secondly, three typical models of the relationship between factors and behavior, which are factors determining task performance in waste management,conceptualization of waste management behavior and the theoretical model of repeated behavior on household waste management, are analyzed and the deficiencies of these models are also analyzed. Finally, according to the current situation in household waste management and the culture and resident's habits in China, this paper puts forward a research focus and suggestions about resident 's behavior of household solid waste management.

Human and technical factors in the doses reduction and optimization at Cogema/Marcoule

International Nuclear Information System (INIS)

Bourgogne, J.L.

1998-01-01

In the case of Cogema/Marcoule, the constant decrease of radiation doses is attributed to three factors: technical with a surveillance system and doses optimization, relational with the promotion of confidence in teams of radiation protection services as an acceptation factor of radiation protection techniques and psychological with an evolution of minds towards the ALARA approach. (N.C.)

Risk factors for technical failure of endoscopic double self-expandable metallic stent placement by partial stent-in-stent method.

Science.gov (United States)

Kawakubo, Kazumichi; Kawakami, Hiroshi; Toyokawa, Yoshihide; Otani, Koichi; Kuwatani, Masaki; Abe, Yoko; Kawahata, Shuhei; Kubo, Kimitoshi; Kubota, Yoshimasa; Sakamoto, Naoya

2015-01-01

Endoscopic double self-expandable metallic stent (SEMS) placement by the partial stent-in-stent (PSIS) method has been reported to be useful for the management of unresectable hilar malignant biliary obstruction. However, it is technically challenging, and the optimal SEMS for the procedure remains unknown. The aim of this study was to identify the risk factors for technical failure of endoscopic double SEMS placement for unresectable malignant hilar biliary obstruction (MHBO). Between December 2009 and May 2013, 50 consecutive patients with MHBO underwent endoscopic double SEMS placement by the PSIS method. We retrospectively evaluated the rate of successful double SEMS placement and identified the risk factors for technical failure. The technical success rate for double SEMS placement was 82.0% (95% confidence interval [CI]: 69.2-90.2). On univariate analysis, the rate of technical failure was high in patients with metastatic disease and unilateral placement. Multivariate analysis revealed that metastatic disease was a significant risk factor for technical failure (odds ratio: 9.63, 95% CI: 1.11-105.5). The subgroup analysis after double guidewire insertion showed that the rate of technical success was higher in the laser-cut type SEMS with a large mesh and thick delivery system than in the braided type SEMS with a small mesh and thick delivery system. Metastatic disease was a significant risk factor for technical failure of double SEMS placement for unresectable MHBO. The laser-cut type SEMS with a large mesh and thin delivery system might be preferable for the PSIS procedure. © 2014 Japanese Society of Hepato-Biliary-Pancreatic Surgery.

Motivational factors influencing small construction and auto repair enterprises to participate in occupational health and safety programmes

DEFF Research Database (Denmark)

Kvorning, Laura Veng; Hasle, Peter; Christensen, Ulla

2015-01-01

the processmeaningful. Contextual factors, as experienced by the owner-managers, influenced the motivation foractive participation. These included inter alia general attitude towards authorities and procedures, accessto relevant projects and technical equipment, the characteristics of the manager, and the workplace......Small enterprises have limited resources to prioritise occupational health and safety (OHS) so regulatorsand other stakeholders have developed programmes to support them. The present study analysed thefactors influencing active participation of small construction and auto repair enterprises...... foractive participation also depended on the content of the prevention package, the economic support andthe possibility for facilitation. The decision to start the implementation process depended on whether theowner-managers acknowledged the need for the new OHS approach and whether they found...

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

Science.gov (United States)

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, ptechnical performance score (task management, team working, situation awareness, decision-making). During CPR with external stressors, the team's technical performance is related to the non-technical skills of the team leader. This may have important implications for training of

The Evaluation of Factors Influencing Flights Delay at Czech International Airports

Directory of Open Access Journals (Sweden)

Martina Zámková

2015-01-01

Full Text Available The main goal of this article was examination of factors influencing flights delay at three most important international airports in Czech Republic. Data of selected Airlines operating in Czech Republic, whose flights are mainly oriented to international airports in Prague, Brno and Ostrava, were used for needs of this article. Analysis of contingency tables including Pearson chi-squared test was used for data processing. Dependences were presented in graphical form by correspondence analysis. Results from analysis showed that delay caused by technical reasons and maintenance is the most frequent in Prague as well as delay caused by high concentration of airspace, operational management and crew duty norms. Problems caused by departure delay from previous destination are significantly more frequent in Brno and Ostrava by reason of small number of alternative available aircraft. Delays caused by supplier (handling, catering, … are mostly short, in particular by reason of potential penalty. Delays caused by technical problems and necessary maintenance service last mostly longer time and are more frequently on aircraft of type Boeing. Delays of borrowed aircraft of type Airbus are more frequently caused by rental and control of this aircraft by other companies which causes communication and planning difficulties.

Factors influencing choice of oral hygiene products by dental ...

African Journals Online (AJOL)

Background: Several factors, such as cost, branding, packaging and family influence, had been implicated as influencing the choice of toothpastes and toothbrushes by individuals. Media advertisement is also considered a very strong factor influencing consumer's choice. Aim: To assess the extent to which some factors ...

ENERGY EFFICIENCY. TRENDS AND INFLUENCE FACTORS

Directory of Open Access Journals (Sweden)

Zizi GOSCHIN

2006-12-01

Full Text Available Energy efficiency is correlated with many factors of influence: Gross National Income per capita, energy imports (% of energy use, renewable combustible and waste (% of total, energy use per capita, services as % of GDP and others. In this paper we are testing a model of piecewise linear regression with breakpoint in order to measure the influence of these factors on the variation of GDP per unit of energy use in Europe in the year 2003.

Factors influencing the success of animal husbandry cooperatives: A case study in Southwest Iran

Directory of Open Access Journals (Sweden)

Aligholi Heydari

2010-10-01

Full Text Available This survey study aimed at identifying the factors influencing the success of animal husbandry cooperatives in Southwest Iran. Using a questionnaire, the data were collected from 95 managing directors of the cooperatives who were chosen through a multi-stage stratified random sampling method. This study showed an essential need for a systemic framework to analyze the cooperatives’ success. The results showed that the “Honey Bee”, “Cattle (dairy”, and “Lamb” cooperatives were the most successful among different kinds of the cooperatives. Also, among individual attributes, “interest”, “technical knowledge”, and “understanding the concept of cooperative”; among economic variables, “income” and “current investment”; and among external factors, “market access” have significant correlation with the success while structural variables have no significant relation. Furthermore, among all the factors, four variables (“interest”, “understanding the concept of cooperative”, “market access”, and “other incomes” can explain the variations of the success.

Entrepreneurial Attitude and Entrepreneurial Efficacy of Technical Secondary School Students

Science.gov (United States)

Zaidatol Akmaliah, Lope Pihie; Bagheri, Afsaneh

2010-01-01

Entrepreneurial attitude and entrepreneurial efficacy are considered to be two important factors influencing students' intention and success in becoming entrepreneurs. This study was conducted to determine the entrepreneurial attitude and entrepreneurial efficacy of 3000 students following technical subjects in the secondary schools of Malaysia.…

What factors influence mitigative capacity?

International Nuclear Information System (INIS)

Winkler, Harald; Baumert, Kevin; Blanchard, Odile; Burch, Sarah; Robinson, John

2007-01-01

This article builds on Yohe's seminal piece on mitigative capacity, which elaborates 'determinants' of mitigative capacity, also reflected in the IPCC's third assessment report. We propose a revised definition, where mitigative capacity is a country's ability to reduce anthropogenic greenhouse gas emissions or enhance natural sinks. By 'ability' we mean skills, competencies, fitness, and proficiencies that a country has attained which can contribute to GHG emissions mitigation. A conceptual framework is proposed, linking mitigative capacity to a country's sustainable development path, and grouping the factors influencing mitigative capacity into three main sets: economic factors, institutional ones, and technology. Both quantitative and qualitative analysis of factors is presented, showing how these factors vary across countries. We suggest that it is the interplay between the three economic factors-income, abatement cost and opportunity cost-that shape mitigative capacity. We find that income is an important economic factor influencing mitigative capacity, while abatement cost is important in turning mitigative capacity into actual mitigation. Technology is a critical mitigative capacity, including the ability to absorb existing climate-friendly technologies or to develop innovative ones. Institutional factors that promote mitigative capacity include the effectiveness of government regulation, clear market rules, a skilled work force and public awareness. We briefly investigate such as high abatement cost or lack of political willingness that prevent mitigative capacity from being translated into mitigation

Monitoring human and organizational factors influencing common-cause failures of safety-instrumented system during the operational phase

International Nuclear Information System (INIS)

Rahimi, Maryam; Rausand, Marvin

2013-01-01

Safety-instrumented systems (SISs) are important safety barriers in many technical systems in the process industry. Reliability requirements for SISs are specified as a safety integrity level (SIL) with reference to the standard IEC 61508. The SIS reliability is often threatened by common-cause failures (CCFs), and the beta-factor model is the most commonly used model for incorporating the effects of CCFs. In the design phase, the beta-factor, β, is determined by answering a set of questions that is given in part 6 of IEC 61508. During the operational phase, there are several factors that influence β, such that the actual β differs from what was predicted in the design phase, and therefore the required reliability may not be maintained. Among the factors influencing β in the operational phase are human and organizational factors (HOFs). A number of studies within industries that require highly reliable products have shown that HOFs have significant influence on CCFs and therefore on β in the operational phase, but this has been neglected in the process industry. HOFs are difficult to predict, and susceptible to be changed during the operational phase. Without proper management, changing HOFs may cause the SIS reliability to drift out of its required value. The aim of this article is to highlight the importance of HOFs in estimation of β for SISs, and also to propose a framework to follow the HOFs effects and to manage them such that the reliability requirement can be maintained

Simulation of long-term influence from technical systems on permafrost with various short-scale and hourly operation modes in Arctic region

Science.gov (United States)

Vaganova, N. A.

2017-12-01

Technogenic and climatic influences have a significant impact on the degradation of permafrost. Long-term forecasts of such changes during long-time periods have to be taken into account in the oil and gas and construction industries in view to development the Arctic and Subarctic regions. There are considered constantly operating technical systems (for example, oil and gas wells) that affect changes in permafrost, as well as the technical systems that have a short-term impact on permafrost (for example, flare systems for emergency flaring of associated gas). The second type of technical systems is rather complex for simulation, since it is required to reserve both short and long-scales in computations with variable time steps describing the complex technological processes. The main attention is paid to the simulation of long-term influence on the permafrost from the second type of the technical systems.

Identification and weighting factors influencing the establishment of a single minute exchange of dies in plastic injection industry using VIKOR and Shannon Entropy

Directory of Open Access Journals (Sweden)

Gholam Reza Hashemzadeh

2014-05-01

Full Text Available Single minute exchange of dies (SMED is one of the most important tools to achieve lean production system. The main idea of this system is to provide methods and to use creative and innovative solutions for continuous improvement. Due to the importance of this issue and its effect on reducing waste during the production process, this study presents a method to identify and to weight factors in the establishment of a single minute exchange of dies in 14 plastic injection factories. In this study, fourteen factories in injection industry were chosen and the factors influencing the implementation of single minute exchange of dies were identified. Following data collection, decision matrix was formed and the weight of each factor was determined by using Shannon Entropy. Then, in order to determine the readiness of factories, VIKOR method was used to rank companies. The results indicate priorities of the following factors in establishing SMED that include: Senior management support, technical capabilities, technical knowledge of staff and consultants, knowledge of mold design, manufacturing infrastructure, team work, combination of the project team work, benchmarking, training, clear understanding of project objectives, rewards and motivation, proper management expectation, project management, teamwork and organizational culture. Practical implications: Due to the factors, Top manager can make the best decision for implementing of SMED technique. This study develops factors influencing on SMED implementation based on Shannon and VIKOR methods for ranking parameters and plants.

Impact of Medicare Advantage penetration and hospital competition on technical efficiency of nursing care in US intensive care units.

Science.gov (United States)

Min, Ari; Scott, Linda D; Park, Chang; Vincent, Catherine; Ryan, Catherine J; Lee, Taewha

2018-04-10

This study aimed to evaluate technical efficiency of US intensive care units and determine the effects of environmental factors on technical efficiency in providing quality of nursing care. Data were obtained from the 2014 National Database of Nursing Quality Indicators and the Centers for Medicare and Medicaid Services. Data envelopment analysis was used to estimate technical efficiency for each intensive care unit. Multilevel modeling was used to determine the effects of environmental factors on technical efficiency. Overall, Medicare Advantage penetration and hospital competition in a market did not create pressure for intensive care units to become more efficient by reducing their inputs. However, these 2 environmental factors showed positive influences on technical efficiency in intensive care units with certain levels of technical efficiency. The implications of the study results for management strategies and health policy may vary according to the levels of technical efficiency in intensive care units. Further studies are needed to examine why and how intensive care units with particular levels of technical efficiency are differently affected by certain environmental factors. Copyright © 2018 John Wiley & Sons, Ltd.

Imagining Technicities

DEFF Research Database (Denmark)

Liboriussen, Bjarke; Plesner, Ursula

2011-01-01

to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... in cooperation and development of ICTs seems to pass unnoticed. However, since they are aligned into ICTs, technicities impact innovation....

Factors Influencing Colorectal Cancer Screening Participation

Directory of Open Access Journals (Sweden)

Antonio Z. Gimeno García

2012-01-01

Full Text Available Colorectal cancer (CRC is a major health problem worldwide. Although population-based CRC screening is strongly recommended in average-risk population, compliance rates are still far from the desirable rates. High levels of screening uptake are necessary for the success of any screening program. Therefore, the investigation of factors influencing participation is crucial prior to design and launches a population-based organized screening campaign. Several studies have identified screening behaviour factors related to potential participants, providers, or health care system. These influencing factors can also be classified in non-modifiable (i.e., demographic factors, education, health insurance, or income and modifiable factors (i.e., knowledge about CRC and screening, patient and provider attitudes or structural barriers for screening. Modifiable determinants are of great interest as they are plausible targets for interventions. Interventions at different levels (patient, providers or health care system have been tested across the studies with different results. This paper analyzes factors related to CRC screening behaviour and potential interventions designed to improve screening uptake.

Revisiting the utility of technical performance scores following tetralogy of Fallot repair.

Science.gov (United States)

Lodin, Daud; Mavrothalassitis, Orestes; Haberer, Kim; Sunderji, Sherzana; Quek, Ruben G W; Peyvandi, Shabnam; Moon-Grady, Anita; Karamlou, Tara

2017-08-01

Although an important quality metric, current technical performance scores may not be generalizable and may omit operative factors that influence outcomes. We examined factors not included in current technical performance scores that may contribute to increased postoperative length of stay, major complications, and cost after primary repair of tetralogy of Fallot. This is a retrospective single site study of patients younger than age 2 years with tetralogy of Fallot undergoing complete repair between 2007 and 2015. Medical record data and discharge echocardiograms were reviewed to ascertain component and composite technical performance scores. Primary outcomes included postoperative length of stay, major complications, and total hospital costs. Multivariable logistic and linear regression identified determinants of each outcome. Patient population (n = 115) had a median postoperative length of stay of 8 days (interquartile range, 6-10 days), and a median total cost of $71,147. Major complications occurred in 33 patients (29%) with 1 death. Technical performance scores assigned were optimum in 28 patients (25%), adequate in 59 patients (52%), and inadequate in 26 patients (23%). Neither technical performance score components nor composite scores were associated with increased postoperative length of stay. Optimum or adequate repairs versus inadequate had equal risk of a complication (P = .79), and equivalent mean total cost ($100,000 vs $187,000; P = .25). Longer cardiopulmonary bypass time per 1-minute increase (P technical performance scores were not associated with selected outcomes in our postoperative population. Although returning to bypass and bypass length are not included as components in the current score, these are important factors influencing complications and resource use in our population. Revisions anticipated from a prospective trial should consider including these variables. Copyright © 2017 The American Association for Thoracic Surgery

Engineering Technical Review Planning Briefing

Science.gov (United States)

Gardner, Terrie

2012-01-01

The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

Balancing human and technical reliability in the design of advanced nuclear reactors

International Nuclear Information System (INIS)

Papin, Bernard

2011-01-01

Highlights: ► Human factors exigencies are often overseen during the early design phases of NPP. ► Optimization of reactors safety is only based on technical reliability considerations. ► The search for more technical reliability often leads to more system complexity. ► System complexity is a major contributor to the operator's poor performance. ► Our method enables to assess plant complexity and it's impact on human performance. - Abstract: The strong influence of human factors (HF) on the safety of nuclear facilities is nowadays recognised and the designers are now enforced to consider HF requirements in the design of new facilities. Yet, this consideration of human factors requirements is still more or less restricted to the latest phases of the projects, essentially for the design of human-system interfaces (HSI's) and control rooms, although the design options influencing at most the human performance in operation are indeed fixed during the very early phases of the new reactors projects. The main reason of this late consideration of HF is that there exist few methods and models for anticipating the influence of fundamental design options on the future performance of operation teams. This paper describes a set of new tools permitting (i) determination of the impact of the fundamental process design options on the future activity of the operation teams and (ii) assessment of the influence of these operational constraints on teams performance. These tools are intended to guide the design of future 4th generation (GEN4) reactors, within the frame of a global risk-informed design approach, considering technical and human reliability exigencies in a balanced way.

Punctuation as readability and textuality factor in technical discourse

Directory of Open Access Journals (Sweden)

Carmen Sancho Guinda

2002-04-01

Full Text Available This paper studies the incidence of punctuation on the reading comprehension of technical discourse and its role as a factor of textuality. Starting out from the notions of textuality and punctuation functions formulated by different linguistic approaches, an analysis has been made to quantify the decoding skills and punctuating competence of 60 Aeronautical Engineering students, as well as to determine the nature and effects of their punctuation errors. The survey has been focused on the Full Stop, the comma and the hyphen due to their highly conflicting uses as regards the identification of immediate sentence constituents and semantic relationships. The results obtained suggest that most students have a poor knowledge of punctuation rules and little awareness of punctuation as a textual elementaffecting readability. Errors are in the main related to comma use and produced by transference, either of Spanish punctuating habits into English, or of individual prosodic patterns into writing, while meaning appears to be the prevailing punctuating criterion over sound and syntax. Punctuation proves an effective tool for the anticipation of implicit meanings and an untapped resource in the teaching of the diverse communicative and stylistic possibilities offered by technical texts.

An Investigation into factors influencing the choice of business ...

African Journals Online (AJOL)

There was significant difference between male and female career influencing factors. There was no significant difference regarding the influence exercised by parent in the students' choice of Business Education. There is significant difference between male and female in the influence exerted by external factors in their ...

Urban water consumption and its influencing factors in China

NARCIS (Netherlands)

Fan, Liangxin; Gai, Lingtong; Tong, Yan; Li, Ruihua

2017-01-01

Factors that affect water consumption should be identified to develop effective public policies. However, factors influencing domestic water consumption in cities in China, particularly on a national scale, are unclear. In this study, urban water consumption and its influencing factors in 286

Factors Influencing Pregnancy Desires among HIV Positive Women ...

African Journals Online (AJOL)

Factors Influencing Pregnancy Desires among HIV Positive Women in Sibande District in Mpumalanga, South Africa. ... Gender and Behaviour ... The objective of the study is to present findings on factors influencing pregnancy desires amongst HIV positive women that have participated in Prevention of Mother to child ...

The (Un)Attractiveness of Vocational and Technical Education: Theoretical Background

Science.gov (United States)

Lovšin, Miha

2014-01-01

This paper considers the problem of the lack of attractiveness of vocational and technical education via a review of legislation on counselling practices, implementing documents, and the social factors by means of which the education system can influence the individual's decision. It is apparent that legislation regulating the organisation and…

Social Factors Influencing Child Health in Ghana.

Directory of Open Access Journals (Sweden)

Emmanuel Quansah

Full Text Available Social factors have profound effects on health. Children are especially vulnerable to social influences, particularly in their early years. Adverse social exposures in childhood can lead to chronic disorders later in life. Here, we sought to identify and evaluate the impact of social factors on child health in Ghana. As Ghana is unlikely to achieve the Millennium Development Goals' target of reducing child mortality by two-thirds between 1990 and 2015, we deemed it necessary to identify social determinants that might have contributed to the non-realisation of this goal.ScienceDirect, PubMed, MEDLINE via EBSCO and Google Scholar were searched for published articles reporting on the influence of social factors on child health in Ghana. After screening the 98 articles identified, 34 of them that met our inclusion criteria were selected for qualitative review.Major social factors influencing child health in the country include maternal education, rural-urban disparities (place of residence, family income (wealth/poverty and high dependency (multiparousity. These factors are associated with child mortality, nutritional status of children, completion of immunisation programmes, health-seeking behaviour and hygiene practices.Several social factors influence child health outcomes in Ghana. Developing more effective responses to these social determinants would require sustainable efforts from all stakeholders including the Government, healthcare providers and families. We recommend the development of interventions that would support families through direct social support initiatives aimed at alleviating poverty and inequality, and indirect approaches targeted at eliminating the dependence of poor health outcomes on social factors. Importantly, the expansion of quality free education interventions to improve would-be-mother's health knowledge is emphasised.

Modeling Factors with Influence on Sustainable University Management

Directory of Open Access Journals (Sweden)

Oana Dumitrascu

2015-01-01

Full Text Available The main objective of this paper is to present the factors with influence on the sustainable university management and the relationships between them. In the scientific approach we begin from a graphical model, according to which the extracurricular activities together with internal environmental factors influence students’ involvement in such activities, the university attractiveness, their academic performance and their integration into the socially-economic and natural environment (components related with sustainable development. The model emphasizes that individual performances, related to students’ participation in extracurricular activities, have a positive influence on the sustainability of university management. The results of the study have shown that the university sustainability may be influenced by a number of factors, such as students’ performance, students’ involvement in extracurricular activities or university’s attractiveness and can in turn influence implicitly also the sustainability of university management. The originality of the paper consists in the relationships study using the modeling method in general and informatics tools of modeling in particular, as well as through graphical visualization of some influences, on the sustainability university management.

FACTORS INFLUENCING SECOND LANGUAGE ACQUISITION

Directory of Open Access Journals (Sweden)

Siti Khasinah

2014-05-01

Full Text Available Motivation, attitude, age, intelligence, aptitude, cognitive style, and personality are considered as factors that greatly influence someone in the process of his or her second language acquisition. Experts state that those factors give a more dominant contribution in SLA to learners variedly, depend on who the learners are, their age, how they behave toward the language, their cognitive ability, and also the way they learn.

Influence of organizational factors on safety

International Nuclear Information System (INIS)

Haber, S.B.; Metlay, D.S.; Crouch, D.A.

1990-01-01

There is a need for a better understanding of exactly how organizational management factors at a nuclear power plant (NPP) affect plant safety performance, either directly or indirectly, and how these factors might be observed, measured, and evaluated. The purpose of this research project is to respond to that need by developing a general methodology for characterizing these organizational and management factors, systematically collecting information on their status and integrating that information into various types of evaluative activities. Research to date has included the development of the Nuclear Organization and Management Analysis Concept (NOMAC) of a NPP, the identification of key organizational and management factors, and the identification of the methods for systematically measuring and analyzing the influence of these factors on performance. Most recently, two field studies, one at a fossil fuel plant and the other at a NPP, were conducted using the developed methodology. Results are presented from both studies highlighting the acceptability, practicality, and usefulness of the methods used to assess the influence of various organizational and management factors including culture, communication, decision-making, standardization, and oversight. 6 refs., 3 figs., 1 tab

INFLUENCE FACTORS FOR LEASING MARKET CONTRACTS

Directory of Open Access Journals (Sweden)

Oana BĂRBULESCU

2016-11-01

Full Text Available This paper aims to investigate the relationship between leasing contracts and some factors that influence the value of these contracts. In order to do this, we have decided on some quantitative marketing research by appealing to statistics for accomplishing the objectives that we have set: to find a correlation between the turnover percentage assigned to leasing expenses and several influence factors. This study indicated that the more contracts are signed by a firm, the more likely is to assign a bigger fraction of the income to each new leasing contract. The study confirmed that bigger companies are relying more on leasing as a way of financing than small companies. This study also discovered that companies with more employees are using larger contracts in order to sustain their activity. The findings are expected to contribute to adjusting the offers by the leasing companies, taking into consideration these factors and to using these factors in order to better predict the market evolution.

Factors that negatively influence consumption of traditionally ...

African Journals Online (AJOL)

Factors that negatively influence consumption of traditionally fermented milk ... in various countries of sub-Saharan Africa and a number of health benefits to human ... influence consumption of Mursik, a traditionally fermented milk product from ...

Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

Science.gov (United States)

Phuong, Vu Hung

2018-03-01

This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

Factors Influencing Organization Adoption Decision On Cloud Computing

OpenAIRE

Ailar Rahimli

2013-01-01

Cloud computing is a developing field, using by organization that require to computing resource to provide the organizational computing needs. The goal of this research is evaluate the factors that influence on organization decision to adopt the cloud computing in Malaysia. Factors that relate to cloud computing adoption that include : need for cloud computing, cost effectiveness, security effectiveness of cloud computing and reliability. This paper evaluated the factors that influence on ado...

A Comparison of Factors that Influence the Lyophilization Process

OpenAIRE

Mnerie, Dumitru; Anghel, Gabriela Victoria; Mnerie, Alin Vasile; Cheveresan, Constantin

2007-01-01

The lyophilization (or freeze drying) process for agro-foods products depends on a series of technological factors that are in an inter-dependence with the process performance. This paper presents an expert method and its application. This method characterizes the influence factors of the lyophilization process, after the importance level of some factors in correlation with other factors, is defined. Only the most important factors were considered; influence considerations were made in relati...

Evaluating the technical aspects of mixed waste treatment technologies

International Nuclear Information System (INIS)

Bagaasen, L.M.; Scott, P.A.

1992-10-01

This report discusses treatment of mixed wastes which is thought to be more complicated than treatment of either hazardous or radioactive wastes. In fact, the treatment itself is no more complicated: however, the regulations that define acceptability of the final waste disposal system are significantly more entangled, and sometimes in apparent conflict. This session explores the factors that influence the choice of waste treatment technologies, and expands on some of the limitations to their application. The objective of the presentation is to describe the technical factors that influence potential treatment processes and the ramifications associated with particular selections (for example, the generation of secondary waste streams). These collectively provide a framework for making informed treatment process selections

Factors that influence influenza vaccination rates among the elderly: nurses' perspectives.

Science.gov (United States)

Ellen, Moriah

2018-03-01

To explore which factors nurses perceive to help and hinder influenza vaccination rates among the elderly. Influenza-related illnesses and deaths have disproportionately high prevalence among the elderly. Vaccination is an effective tool to prevent complications. Semistructured interviews were conducted with nurses focusing on barriers, facilitators and health care providers' roles in influencing patients to be vaccinated. Interviews were recorded, transcribed and thematically analysed. Nurses identified that the prevalent barriers were fear of the vaccine's side effects, feelings of good health and technical considerations. Facilitators included ease of access and encouragement from health providers, media and social networks. The health care team was influential in raising vaccination rates through direct recommendation, providing concrete information or leading by example. The health care team can influence patients to vaccinate. Investments in training nurses in the knowledge and skills needed to educate patients, and providing nurses with the necessary resources to engage patients in these discussions may be beneficial. Nurse managers can be instrumental in enhancing nurses' roles and actions to increase influenza vaccination rates among the elderly. It is essential to reinforce the nurses' role in promoting vaccination among seniors. Given that nurses are the largest number of health professionals, their potential outreach to large numbers of people is strong. © 2017 John Wiley & Sons Ltd.

Triiodothyronine radioimmunoassay. Comparison of the different factors between two technics

International Nuclear Information System (INIS)

Gehin-Fouque, F.; Etling, N.; Pradelles, P.; Bornet, H.

1980-01-01

Triiodothyronine concentration was determined in human serum and in thyroid extracts by two radioimmunoassay technics. Both antibodies, radioactive T 3 , stable T 3 , protein-binding-hormone inhibitors, methods used to separate the free from the bound fractions were different. Each factor from a method was substituted to the homologue of the other method. The results occasionnally showed a variation of 32% in the first method and 50% in the second one. However the results gave a correct interpretation of the triiodothyronine values measured in human serum and in thyroid extracts [fr

INFLUENCE OF THE IMPLEMENTATION FACTORS IN THE INFORMATION SYSTEMS QUALITY FOR THE USER SATISFACTION

Directory of Open Access Journals (Sweden)

María Isabel de la Garza Ramos

2009-07-01

Full Text Available This research studies the influence range of the organizational, planning and technical factors within the information quality, system quality and information systems services quality, in the user satisfaction, based on the designed model research for this purpose. The empirical study takes place in six Higher Education Institutes (94 questionnaires by the Partial Least Square statistic tool. The results has shown that Organizational Factor (information needs, management support, institutional objectives satisfaction is which has the most impact because its high correlation value (R=0.624; R=0.435 yR=0.428 and significance (p<0.001, p<0.01 and p<0.01 in the three raised hypotheses, taking into consideration an explained variance of 78.8% in the User Satisfaction. In the same way, with the quality in general, the users think that the information systems help to satisfy their information needs and increase their productivity into making decisions in their jobs.

Factors that influence beverage choices at meal times

DEFF Research Database (Denmark)

Mueller Loose, Simone; Jaeger, S. R.

2012-01-01

Beverages are consumed at almost every meal occasion, but knowledge about the factors that influence beverage choice is less than for food choice. The aim of this research was to characterize and quantify factors that influence beverage choices at meal times. Insights into what beverages are chosen...... consumers. Participants (n=164) described 8356 meal occasions in terms of foods and beverages consumed, and the contextual characteristics of the occasion. Beverage choice was explored with random-parameter logit regressions to reveal influences linked to food items eaten, context factors and person factors....... Thereby this study contributed to the food choice kaleidoscope research approach by expressing the degree of context dependency in form of odds ratios and according significance levels. The exploration of co-occurrence of beverages with food items suggests that beverage-meal item combinations can be meal...

Intrinsic and extrinsic factors influencing large African herbivore movements

NARCIS (Netherlands)

Venter, J.A.; Prins, H.H.T.; Mashanova, A.; Boer, de W.F.; Slotow, R.

2015-01-01

Understanding environmental as well as anthropogenic factors that influence large herbivore ecological patterns and processes should underpin their conservation and management. We assessed the influence of intrinsic, extrinsic environmental and extrinsic anthropogenic factors on movement behaviour

Factors influencing workplace health promotion intervention: a qualitative systematic review.

Science.gov (United States)

Rojatz, Daniela; Merchant, Almas; Nitsch, Martina

2017-10-01

Although workplace health promotion (WHP) has evolved over the last 40 years, systematically collected knowledge on factors influencing the functioning of WHP is scarce. Therefore, a qualitative systematic literature review was carried out to systematically identify and synthesize factors influencing the phases of WHP interventions: needs assessment, planning, implementation and evaluation. Research evidence was identified by searching electronic databases (Scopus, PubMed, Social Sciences Citation Index, ASSIA, ERIC, IBBS and PsycINFO) from 1998 to 2013, as well as by cross-checking reference lists of included peer-reviewed articles. The inclusion criteria were: original empirical research, description of WHP, description of barriers to and/or facilitators of the planning, implementation and/or evaluation of WHP. Finally, 54 full texts were included. From these, influencing factors were extracted and summarized using thematic analysis. The majority of influencing factors referred to the implementation phase, few dealt with planning and/or evaluation and none with needs assessment. The influencing factors were condensed into topics with respect to factors at contextual level (e.g. economic crisis); factors at organizational level (e.g. management support); factors at intervention level (e.g. quality of intervention concept); factors at implementer level (e.g. resources); factors at participant level (e.g. commitment to intervention) and factors referring to methodological and data aspects (e.g. data-collection issues). Factors regarding contextual issues and organizational aspects were identified across three phases. Therefore, future research and practice should consider not only the influencing factors at different levels, but also at different phases of WHP interventions. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Factors influencing bone scan quality

International Nuclear Information System (INIS)

Adams, F.G.; Shirley, A.W.

1983-01-01

A reliable subjective method of assessing bone scan quality is described. A large number of variables which theoretically could influence scan quality were submitted to regression and factor analysis. Obesity, age, sex and abnormality of scan were found to be significant but weak variables. (orig.)

Procedures for controlling the risks of reliability, safety, and availability of technical systems

International Nuclear Information System (INIS)

1987-01-01

The reference book covers four sections. Apart from the fundamental aspects of the reliability problem, of risk and safety and the relevant criteria with regard to reliability, the material presented explains reliability in terms of maintenance, logistics and availability, and presents procedures for reliability assessment and determination of factors influencing the reliability, together with suggestions for systems technical integration. The reliability assessment consists of diagnostic and prognostic analyses. The section on factors influencing reliability discusses aspects of organisational structures, programme planning and control, and critical activities. (DG) [de

Factors influencing consumer behaviour in market vegetables in Yemen

Directory of Open Access Journals (Sweden)

Tarish H. Al-Gahaifi

2011-01-01

Full Text Available The purpose of the research is to understand factors influencing consumer behaviour when buying vegetables in Republic of Yemen. Data collection was done by structured questionnaire administered through schools, universities, government offices, and markets from 13 provinces in 5 governorates. Random convenience sampling technique was used. Total sample comprised of 463 completed questionnaires which were used for analysis. The respondents were classified into five categories on the base of their monthly income, age, education, gender, and type of settlement. Authors present the factors that can influence significantly this behaviour, e.g. price, quality, the location of seller, habit, personal relationship between consumer and seller, occasions, discount, sorting, word-mouth, time of purchase, the way of products display, and recommendation of friends and families. From the obtained results, it is obvious that there was high influence on the behaviour of Yemeni consumer when buying vegetables for factors price, occasions, discontent, and time of purchase, while factors habit, display, sorting, and the location of seller suggests medium influence, and the influence was low for word-mouth.

Biomechanical factors influencing the performance of elite Alpine ski racers.

Science.gov (United States)

Hébert-Losier, Kim; Supej, Matej; Holmberg, Hans-Christer

2014-04-01

Alpine ski racing is a popular international winter sport that is complex and challenging from physical, technical, and tactical perspectives. Despite the vast amount of scientific literature focusing on this sport, including topical reviews on physiology, ski-snow friction, and injuries, no review has yet addressed the biomechanics of elite alpine ski racers and which factors influence performance. In World Cup events, winning margins are often mere fractions of a second and biomechanics may well be a determining factor in podium place finishes. The aim of this paper was to systematically review the scientific literature to identify the biomechanical factors that influence the performance of elite alpine ski racers, with an emphasis on slalom, giant slalom, super-G, and downhill events. Four electronic databases were searched using relevant medical subject headings and key words, with an additional manual search of reference lists, relevant journals, and key authors in the field. Articles were included if they addressed human biomechanics, elite alpine skiing, and performance. Only original research articles published in peer-reviewed journals and in the English language were reviewed. Articles that focused on skiing disciplines other than the four of primary interest were excluded (e.g., mogul, ski-cross and freestyle skiing). The articles subsequently included for review were quality assessed using a modified version of a validated quality assessment checklist. Data on the study population, design, location, and findings relating biomechanics to performance in alpine ski racers were extracted from each article using a standard data extraction form. A total of 12 articles met the inclusion criteria, were reviewed, and scored an average of 69 ± 13% (range 40-89%) upon quality assessment. Five of the studies focused on giant slalom, four on slalom, and three on downhill disciplines, although these latter three articles were also relevant to super-G events

Factors negatively influencing knowledge sharing in software development

Directory of Open Access Journals (Sweden)

Lucas T. Khoza

2017-07-01

Objective: This study seeks to identify factors that negatively influence knowledge sharing in software development in the developing country context. Method: Expert sampling as a subcategory of purposive sampling was employed to extract information, views and opinions from experts in the field of information and communication technology, more specifically from those who are involved in software development projects. Four Johannesburg-based software developing organisations listed on the Johannesburg Stock Exchange (JSE, South Africa, participated in this research study. Quantitative data were collected using an online questionnaire with closed-ended questions. Results: Findings of this research reveal that job security, motivation, time constraints, physiological factors, communication, resistance to change and rewards are core factors negatively influencing knowledge sharing in software developing organisations. Conclusions: Improved understanding of factors negatively influencing knowledge sharing is expected to assist software developing organisations in closing the gap for software development projects failing to meet the triple constraint of time, cost and scope.

mHealth Series: Factors influencing sample size calculations for mHealth–based studies – A mixed methods study in rural China

Science.gov (United States)

van Velthoven, Michelle Helena; Li, Ye; Wang, Wei; Du, Xiaozhen; Chen, Li; Wu, Qiong; Majeed, Azeem; Zhang, Yanfeng; Car, Josip

2013-01-01

caregivers participating in face–to–face and text message survey, sending text messages manually, participants responding incorrectly, and technical issues. Participants provided several recommendations for improving follow–up and we added our views to these. Conclusions This is the first study to evaluate factors influencing recruitment and follow–up of participants in an mHealth study in a middle–income setting. More work is needed to assess effectiveness of our suggested strategies. This work would improve evaluation of mHealth interventions. PMID:24363922

The Influence of psychological-sociological factors on self-employment

OpenAIRE

Remeikienė, Rita; Startienė, Gražina; Vasauskaitė, Jovita

2011-01-01

The article deals with the influence of psychological-sociological factors on a self-employed person, which is little explored in business literature. Analysis of scientific literature revealed that the psychological-sociological factors of self-employment can be divided into groups based on certain personal characteristics and individual psychological states, and the influence of psychological-sociological factors of self-employment is threefold: positive, negative, and unclear (both positiv...

A Socio-Technical Analysis of Patient Accessible Electronic Health Records.

Science.gov (United States)

Hägglund, Maria; Scandurra, Isabella

2017-01-01

In Sweden, and internationally, there is a movement towards increased transparency in healthcare including giving patients online access to their electronic health records (EHR). The purpose of this paper is to analyze the Swedish patient accessible EHR (PAEHR) service using a socio-technical framework, to increase the understanding of factors that influence the design, implementation, adoption and use of the service. Using the Sitting and Singh socio-technical framework as a basis for analyzing the Swedish PAEHR system and its context indicated that there are many stakeholders engaged in these types of services, with different driving forces and incentives that may influence the adoption and usefulness of PAEHR services. The analysis was useful in highlighting important areas that need to be further explored in evaluations of PAEHR services, and can act as a guide when planning evaluations of any PAEHR service.

Influence of some design and operating parameters of conveyor with suspended belt and distributed drive on the technical specifications

Directory of Open Access Journals (Sweden)

Tolkachev E.N.

2017-03-01

Full Text Available The influence of several design and operating parameters of conveyor on the individual components of the stretching tension in the belt of conveyor with suspended belt and distributed drive was analyzed. The analysis of influence a number design and operating parameters on the technical specifications of conveyor with suspended belt and distributed drive was done. Recommendations on the choice of rational parameters were formulated.

Influence of some design and operating parameters of conveyor with suspended belt and distributed drive on the technical specifications

OpenAIRE

Tolkachev E.N.

2017-01-01

The influence of several design and operating parameters of conveyor on the individual components of the stretching tension in the belt of conveyor with suspended belt and distributed drive was analyzed. The analysis of influence a number design and operating parameters on the technical specifications of conveyor with suspended belt and distributed drive was done. Recommendations on the choice of rational parameters were formulated.

A survey on critical factors influencing organizational commitment

Directory of Open Access Journals (Sweden)

Hamidreza Kheirkhah

2014-04-01

Full Text Available Organizational commitment is an important issue and organization attitude has become an area of study among many researchers in the fields of organizational behavior. In fact, there are many studies on human resource management where the effects of organizational commitment on other issues have been investigated and the purpose of this research is to find critical factors influencing on organizational commitment. Based on an exploration of the literature review and interviews, the proposed study of this paper extracts 24 variables and using factor analysis, we select the most important factors, which are grouped in four categories. The implementation of our factor analysis has revealed Affective commitment, Continuous commitment, Moral commitment and Enduring commitment are the most important factors influencing organizational commitment.

Hierarchical and coupling model of factors influencing vessel traffic flow.

Science.gov (United States)

Liu, Zhao; Liu, Jingxian; Li, Huanhuan; Li, Zongzhi; Tan, Zhirong; Liu, Ryan Wen; Liu, Yi

2017-01-01

Understanding the characteristics of vessel traffic flow is crucial in maintaining navigation safety, efficiency, and overall waterway transportation management. Factors influencing vessel traffic flow possess diverse features such as hierarchy, uncertainty, nonlinearity, complexity, and interdependency. To reveal the impact mechanism of the factors influencing vessel traffic flow, a hierarchical model and a coupling model are proposed in this study based on the interpretative structural modeling method. The hierarchical model explains the hierarchies and relationships of the factors using a graph. The coupling model provides a quantitative method that explores interaction effects of factors using a coupling coefficient. The coupling coefficient is obtained by determining the quantitative indicators of the factors and their weights. Thereafter, the data obtained from Port of Tianjin is used to verify the proposed coupling model. The results show that the hierarchical model of the factors influencing vessel traffic flow can explain the level, structure, and interaction effect of the factors; the coupling model is efficient in analyzing factors influencing traffic volumes. The proposed method can be used for analyzing increases in vessel traffic flow in waterway transportation system.

Determinant Factors of Technical-Tactical Combinations Frequency in standing position during Womens World Senior Championships 2009

Directory of Open Access Journals (Sweden)

David Eduardo López González

2011-03-01

Full Text Available Abstract Objective. To classify the perfomance  of world class women wrestlers as the frequency and characteristics of their Technical-Tactical Combinations (TTC with effectiveness in the standing position during the most important competition on the international calendar 2009.Methods.  In the TTC were characterized all standing position effectives by a sample of 70 wrestlers, occupants of the top 10 in each of the 7 weight categories convened. Descriptive variables were used 5 of effectiveness, technical group, and characteristics of its phases. Variables were obtained determining the effectiveness, measured the "success rate" achieved by each fighter, all through factor analysis. Later wrestlers were classified by cluster analysis by Ward's method.Results. The most important factor related to get a medal  was the execution of legs attacks of with several possible endings started with almost no contact with the opponent, followed by the use of low-risk attacks launched from a firm grip. The wrestlers opted mostly for defense and counter low risk. Most of the competitors who had good results using several and alternative projections also managed to end their attacks.Conclusions. Characterization Model used and the factors of effectiveness in the fight standing obtained provided detailed explanations of the performance characteristics of the best wrestlers in the Senior World Championships 2009. The design of this research can be applied year after year in both freestyle and women's.Key words: Technical - Tactical Combinations, Rules, Fighting Women, Factor Analysis and Effectiveness

Determinant Factors of Technical-Tactical Combinations Frequency in standing position during Womens World Senior Championships 2009

Directory of Open Access Journals (Sweden)

David Eduardo López González

2011-03-01

Full Text Available Abstract  Objective. To classify the perfomance  of world class women wrestlers as the frequency and characteristics of their Technical-Tactical Combinations (TTC with effectiveness in the standing position during the most important competition on the international calendar 2009. Methods.  In the TTC were characterized all standing position effectives by a sample of 70 wrestlers, occupants of the top 10 in each of the 7 weight categories convened. Descriptive variables were used 5 of effectiveness, technical group, and characteristics of its phases. Variables were obtained determining the effectiveness, measured the "success rate" achieved by each fighter, all through factor analysis. Later wrestlers were classified by cluster analysis by Ward's method. Results. The most important factor related to get a medal  was the execution of legs attacks of with several possible endings started with almost no contact with the opponent, followed by the use of low-risk attacks launched from a firm grip. The wrestlers opted mostly for defense and counter low risk. Most of the competitors who had good results using several and alternative projections also managed to end their attacks. Conclusions. Characterization Model used and the factors of effectiveness in the fight standing obtained provided detailed explanations of the performance characteristics of the best wrestlers in the Senior World Championships 2009. The design of this research can be applied year after year in both freestyle and women's. Key words: Technical - Tactical Combinations, Rules, Fighting Women, Factor Analysis and Effectiveness

Technical innovation and management

Energy Technology Data Exchange (ETDEWEB)

Yoon, Yang Cheol

1982-08-15

This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

Technical innovation and management

International Nuclear Information System (INIS)

Yoon, Yang Cheol

1982-08-01

This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

[Factors influencing nurses' organizational citizenship behavior].

Science.gov (United States)

Park, Junhee; Yun, Eunkyung; Han, Sangsook

2009-08-01

This study was conducted to identify the factors that influence nurses' organizational citizenship behavior. A cross-sectional design was used, with a convenience sample of 547 nurses from four university hospitals in Seoul and Gyeonggi province. The data were collected through a questionnaire survey done from September 22 to October 10, 2008. The tools used for this study were scales on organizational citizenship behavior (14 items), self-leadership (14 items), empowerment (10 items), organizational commitment (7 items), job satisfaction (8 items) and transformational.transactional leadership (14 items). Cronbach's alpha and factor analysis were examined to test reliability and construct validity of the scale. The data collected were processed using SPSS Window 15.0 Program for actual numbers and percentages, differences in the dependent variable according to general characteristics, and means, standard deviations, correlation coefficients and multiple regression analysis. The factors influencing nurses' organizational citizenship behavior were identified as self-leadership(beta=.247), empowerment (beta=.233), job satisfaction (beta=.209), organizational commitment (beta=.158), and transactional leadership (beta=.142). Five factors explained 42.0% of nurses' organizational citizenship behavior. The results of this study can be used to develop further management strategies for enhancement of nurses' organizational citizenship behavior.

Factors Influencing Title VII Bilingual Program Institutionalization.

Science.gov (United States)

Lewis, Gerald R.; And Others

1985-01-01

This study of the primary restraining and driving forces that influence Title VII bilingual education programs found the external environment, the local community, to be the main factor influencing institutionalization and self-renewal. The internal environment--the local school, and the local school's organization or central office, school board,…

A factor analysis to detect factors influencing building national brand

Directory of Open Access Journals (Sweden)

Naser Azad

Full Text Available Developing a national brand is one of the most important issues for development of a brand. In this study, we present factor analysis to detect the most important factors in building a national brand. The proposed study uses factor analysis to extract the most influencing factors and the sample size has been chosen from two major auto makers in Iran called Iran Khodro and Saipa. The questionnaire was designed in Likert scale and distributed among 235 experts. Cronbach alpha is calculated as 84%, which is well above the minimum desirable limit of 0.70. The implementation of factor analysis provides six factors including “cultural image of customers”, “exciting characteristics”, “competitive pricing strategies”, “perception image” and “previous perceptions”.

Technical executive’s organizational commitment at Malaysian Oil & Gas Industry

OpenAIRE

Firend, A.R; Binti Sofyan, P.

2016-01-01

This paper investigates the levels of organizational commitment among technical executive, identifies factors that influence organizational commitment in the Malaysian oil and gas industry, and examines the impact of organizational commitment on organizational performance. This research was conducted at Malaysia Marine and Heavy Engineering (MMHE). The framework adopted the three component-conceptualization of organizational commitment. Among the findings is that organizational commitment ten...

Factors Influencing Prevention and Control of Malaria among ...

African Journals Online (AJOL)

AJRH Managing Editor

investigate factors that influence malaria prevention and control practices among pregnant ... treatment of clinical cases and the promotion of ... influence their decision regarding malaria ..... have the ability to purchase anti-malaria drugs that.

Factors influencing the stay-exit intention of small livestock farmers

NARCIS (Netherlands)

Carter-Leal, Luis M.; Oude-Lansink, Alfons; Saatkamp, Helmut

2018-01-01

This study analyses the factors driving the stay-exit intention of small livestock farmers located in southern Chile. Technical, economic, and social characteristics from 212 farmers were included in this study. Through an empirical probit model we identified the variables that should be considered

The influence of technical testing methods on perceptions of constructions

International Nuclear Information System (INIS)

Oestberg, Gustaf

2002-01-01

In principle, methods of testing the reliability and safety of constructions are designed with the aim of representing critical conditions for their use. Because of variations within technical systems, including the one for which a certain test was once developed, the validity of the method also varies. The adoption of a standardized test for different applications had to be based on the assumption that the test deals adequately with a real situation. As a consequence of this acceptance of a trustworthy relationship between test and reality, an imprint of the former on the latter occurs. This effect may even cause the perception of a reality to be defined by the corresponding test. Examples of such an influence may be found in the field of materials testing. Related phenomena can be dealt with by reference to current concepts of cognitive science and psychology of the perception of images

Factors influencing choice of paediatrics as a career among medical ...

African Journals Online (AJOL)

None of the male students but 12 of the female students (30%) considered gender distribution to be a factor influencing their career choice (p=0.046). Conclusion. This study indicates that paediatrics is popular among female students and that several factors influence choice of this specialty. Understanding these factors may ...

Hierarchical and coupling model of factors influencing vessel traffic flow.

Directory of Open Access Journals (Sweden)

Zhao Liu

Full Text Available Understanding the characteristics of vessel traffic flow is crucial in maintaining navigation safety, efficiency, and overall waterway transportation management. Factors influencing vessel traffic flow possess diverse features such as hierarchy, uncertainty, nonlinearity, complexity, and interdependency. To reveal the impact mechanism of the factors influencing vessel traffic flow, a hierarchical model and a coupling model are proposed in this study based on the interpretative structural modeling method. The hierarchical model explains the hierarchies and relationships of the factors using a graph. The coupling model provides a quantitative method that explores interaction effects of factors using a coupling coefficient. The coupling coefficient is obtained by determining the quantitative indicators of the factors and their weights. Thereafter, the data obtained from Port of Tianjin is used to verify the proposed coupling model. The results show that the hierarchical model of the factors influencing vessel traffic flow can explain the level, structure, and interaction effect of the factors; the coupling model is efficient in analyzing factors influencing traffic volumes. The proposed method can be used for analyzing increases in vessel traffic flow in waterway transportation system.

Factors influencing cassava - pulp fermentation period for gari ...

African Journals Online (AJOL)

Factors influencing cassava - pulp fermentation period for gari processing among ... Result of probit model analysis at 5% significance level shows an R value ... Marital status (2.236**) and respondents' cultural influences (1.960**) were ...

Effects of Demographic Characteristics, Educational Background, and Supporting Factors on ICT Readiness of Technical and Vocational Teachers in Malaysia

Science.gov (United States)

Alazzam, Abu-Obaideh; Bakar, Ab Rahim; Hamzah, Ramlah; Asimiran, S.

2012-01-01

The aim of this study was to examine ICT readiness and the effects of demographic characteristics, educational background, and support factors on the ICT readiness of technical and vocational teachers in Malaysia. The questionnaire was administered to 329 technical and vocational teachers who are teaching engineering subjects in Malaysian…

Quantitative influence of risk factors on blood glucose level.

Science.gov (United States)

Chen, Songjing; Luo, Senlin; Pan, Limin; Zhang, Tiemei; Han, Longfei; Zhao, Haixiu

2014-01-01

The aim of this study is to quantitatively analyze the influence of risk factors on the blood glucose level, and to provide theory basis for understanding the characteristics of blood glucose change and confirming the intervention index for type 2 diabetes. The quantitative method is proposed to analyze the influence of risk factors on blood glucose using back propagation (BP) neural network. Ten risk factors are screened first. Then the cohort is divided into nine groups by gender and age. According to the minimum error principle, nine BP models are trained respectively. The quantitative values of the influence of different risk factors on the blood glucose change can be obtained by sensitivity calculation. The experiment results indicate that weight is the leading cause of blood glucose change (0.2449). The second factors are cholesterol, age and triglyceride. The total ratio of these four factors reaches to 77% of the nine screened risk factors. And the sensitivity sequences can provide judgment method for individual intervention. This method can be applied to risk factors quantitative analysis of other diseases and potentially used for clinical practitioners to identify high risk populations for type 2 diabetes as well as other disease.

Factors Influencing Healthcare Service Quality

Directory of Open Access Journals (Sweden)

Ali Mohammad Mosadeghrad

2014-07-01

Full Text Available Background The main purpose of this study was to identify factors that influence healthcare quality in the Iranian context. Methods Exploratory in-depth individual and focus group interviews were conducted with 222 healthcare stakeholders including healthcare providers, managers, policy-makers, and payers to identify factors affecting the quality of healthcare services provided in Iranian healthcare organisations. Results Quality in healthcare is a production of cooperation between the patient and the healthcare provider in a supportive environment. Personal factors of the provider and the patient, and factors pertaining to the healthcare organisation, healthcare system, and the broader environment affect healthcare service quality. Healthcare quality can be improved by supportive visionary leadership, proper planning, education and training, availability of resources, effective management of resources, employees and processes, and collaboration and cooperation among providers. Conclusion This article contributes to healthcare theory and practice by developing a conceptual framework that provides policy-makers and managers a practical understanding of factors that affect healthcare service quality.

Variance of indoor radon concentration: Major influencing factors

Energy Technology Data Exchange (ETDEWEB)

Yarmoshenko, I., E-mail: ivy@ecko.uran.ru [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation); Vasilyev, A.; Malinovsky, G. [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation); Bossew, P. [German Federal Office for Radiation Protection (BfS), Berlin (Germany); Žunić, Z.S. [Institute of Nuclear Sciences “Vinca”, University of Belgrade (Serbia); Onischenko, A.; Zhukovsky, M. [Institute of Industrial Ecology UB RAS, Sophy Kovalevskoy, 20, Ekaterinburg (Russian Federation)

2016-01-15

Variance of radon concentration in dwelling atmosphere is analysed with regard to geogenic and anthropogenic influencing factors. Analysis includes review of 81 national and regional indoor radon surveys with varying sampling pattern, sample size and duration of measurements and detailed consideration of two regional surveys (Sverdlovsk oblast, Russia and Niška Banja, Serbia). The analysis of the geometric standard deviation revealed that main factors influencing the dispersion of indoor radon concentration over the territory are as follows: area of territory, sample size, characteristics of measurements technique, the radon geogenic potential, building construction characteristics and living habits. As shown for Sverdlovsk oblast and Niška Banja town the dispersion as quantified by GSD is reduced by restricting to certain levels of control factors. Application of the developed approach to characterization of the world population radon exposure is discussed. - Highlights: • Influence of lithosphere and anthroposphere on variance of indoor radon is found. • Level-by-level analysis reduces GSD by a factor of 1.9. • Worldwide GSD is underestimated.

FACTORS INFLUENCING YIELD SPREADS OF THE MALAYSIAN BONDS

Directory of Open Access Journals (Sweden)

Norliza Ahmad

2009-01-01

Full Text Available Malaysian bond market is developing rapidly but not much is understood in terms of macroeconomic factors that could influence the yield spread of the Ringgit Malaysian denominated bonds. Based on a multifactor model, this paper examines the impact of four macroeconomic factors namely: Kuala Lumpur Composite Index (KLCI, Industry Production Index (IPI, Consumer Price Index (CPI and interest rates (IR on bond yield spread of the Malaysian Government Securities (MGS and Corporate Bonds (CBs for a period from January 2001 to December 2008. The findings support the expected hypotheses that CPI and IR are the major drivers that influence the changes in MGS yield spreads. However IPI and KLCI have weak and no influence on MGS yield spreads respectively Whilst IR, CPI and IPI have significant influence on the yield spreads of CB1, CB2 and CB3, KLCI has significant influence only on the CB1 yield spread but not on CB2 and CB3 yield spreads.

Factors influencing US medical students' decision to pursue surgery.

Science.gov (United States)

Schmidt, Lauren E; Cooper, Clairice A; Guo, Weidun Alan

2016-06-01

Interest and applications to surgery have steadily decreased over recent years in the United States. The goal of this review is to collect the current literature regarding US medical students' experience in surgery and factors influencing their intention to pursue surgery as a career. We hypothesize that multiple factors influence US medical students' career choice in surgery. Six electronic databases (PubMed, SCOPUS, Web of Science, Education Resources Information Center, Embase, and PsycINFO) were searched. The inclusion criteria were studies published after the new century related to factors influencing surgical career choice among US medical students. Factors influencing US medical student surgical career decision-making were recorded. A quality index score was given to each article selected to minimize risk of bias. We identified 38 relevant articles of more than 1000 nonduplicated titles. The factors influencing medical student decision for a surgical career were categorized into five domains: mentorship and role model (n = 12), experience (clerkship n = 9, stereotype n = 4), timing of exposure (n = 9), personal (lifestyle n = 8, gender n = 6, finance n = 3), and others (n = 2). This comprehensive systemic review identifies mentorship, experience in surgery, stereotypes, timing of exposure, and personal factors to be major determinants in medical students' decisions to pursue surgery. These represent areas that can be improved to attract applicants to general surgery residencies. Surgical faculty and residents can have a positive influence on medical students' decisions to pursue surgery as a career. Early introduction to the field of surgery, as well as recruitment strategies during the preclinical and clinical years of medical school can increase students' interest in a surgical career. Copyright © 2016 Elsevier Inc. All rights reserved.

Internal design of technical systems under conditions of uncertainty

Energy Technology Data Exchange (ETDEWEB)

Krasnoshchekov, P S; Morozov, V V; Fedorov, V V

1982-03-01

An investigation is made of a model of internal design of a complex technical system in the presence of uncertain factors. The influence of an opponent on the design is examined. The concepts of hierarchical and balanced compatibility between the criteria of the designer, the opponent and the segregations functions are introduced and studied. The connection between the approach proposed and the methods of artificial intelligence is discussed. 5 references.

Technical attributes, health attribute, consumer attributes and their roles in adoption intention of healthcare wearable technology.

Science.gov (United States)

Zhang, Min; Luo, Meifen; Nie, Rui; Zhang, Yan

2017-12-01

This paper aims to explore factors influencing the healthcare wearable technology adoption intention from perspectives of technical attributes (perceived convenience, perceived irreplaceability, perceived credibility and perceived usefulness), health attribute (health belief) and consumer attributes (consumer innovativeness, conspicuous consumption, informational reference group influence and gender difference). By integrating technology acceptance model, health belief model, snob effect and conformity and reference group theory, hypotheses and research model are proposed. The empirical investigation (N=436) collects research data through questionnaire. Results show that the adoption intention of healthcare wearable technology is influenced by technical attributes, health attribute and consumer attributes simultaneously. For technical attributes, perceived convenience and perceived credibility both positively affect perceived usefulness, and perceived usefulness influences adoption intention. The relation between perceived irreplaceability and perceived usefulness is only supported by males. For health attribute, health belief affects perceived usefulness for females. For consumer attributes, conspicuous consumption and informational reference group influence can significantly moderate the relation between perceived usefulness and adoption intention and the relation between consumer innovativeness and adoption intention respectively. What's more, consumer innovativeness significantly affects adoption intention for males. This paper aims to discuss technical attributes, health attribute and consumer attributes and their roles in the adoption intention of healthcare wearable technology. Findings may provide enlightenment to differentiate product developing and marketing strategies and provide some implications for clinical medicine. Copyright © 2017 Elsevier B.V. All rights reserved.

Case study on the role of socio-technical influences on the implementation and success of nuclear power in France

International Nuclear Information System (INIS)

Jedani, T.

2004-01-01

To fully understand a technological development one must appreciate social, political and economic factors in addition to the technological components (Hughes, 1991). The systems perspective, asserted by Hughes, implies that technologies cannot be understood in isolation, but only in their contexts, especially in their systemic contexts. This theory is illustrated through an examination of France's implementation of its nuclear power program in the early 1970's. Nuclear power provided France with the opportunity to achieve energy independence and, as a result, political control over its energy supply. The scope of this case study is limited to consideration of the socio-technical influences on the rise of nuclear power in France and includes an examination of the technical aspects of the innovation. In considering the socio-technical system encompassing France's adoption of nuclear power, this case study will contemplate: how France was able to persuade its people to accept nuclear power; what it is about French culture and politics that allowed them to succeed where most other countries have failed; the breakthroughs that led to the broad commercialization of nuclear power in France in the 1970's; and how France achieved its status as one of the world's top producers of nuclear energy. The time period during which this study is based is limited to the early 1970's, when France was reliant upon external energy supplies, up until the present day, where nuclear power has become France's main source of energy, thus contributing to France's autonomy in terms of its energy supply. This study will not address the issue of nuclear waste or the nuclear power safety debate which is also beyond the scope of this study. (author)

A survey on critical factors influencing agricultural insurance

Directory of Open Access Journals (Sweden)

Ali Valipour

2013-01-01

Full Text Available Agricultural business is a very high-risk job and an increase demand for agricultural products from one side and steady increase in production cost and weather changes, on the other side, have motivated many to use insurance for agricultural products. Insurance plays an important role in influencing crop production and insured satisfaction or farmers. The purpose of this research is to find critical components in agricultural insurance. Based on an exploration of the literature review and interviews, the proposed study of this paper extracts 24 variables and using factor analysis, we select the most important factors, which are grouped in seven categories. The implementation of our factor analysis has revealed uncertainty, moderator, market equilibrium, risky environment, empowering factor, education, training, structural hazards and natural ecosystems as the most important factors influencing agricultural industry.

Which factors influence women in the decision to breastfeed?

Directory of Open Access Journals (Sweden)

Cândida Canicali Primo

Full Text Available Objective.Identify the factors that influence women in the decision to breastfeed. Methods. Integrative review. Information was gathered from original articles, case studies, theoretical studies, consensus and systematic reviews published between 2007-2013 in Spanish, Portuguese and English and recovered in the databases MEDLINE and LILACS. The descriptors used in this study were: breastfeeding, maternal behavior, risk factors, lactation and newborn. Results. Were included 30 articles, grouped into five categories. Factors influencing the decision of the breastfeeding woman are a convergence of breastfeeding's advantages, benefits and justifications, family, social and professional support, sociodemographic and clinical characteristics of women, personal experience and family tradition and personal choice. Conclusion. The decision to breastfeed by women is influenced by a convergence of factors. It is essential the role of nursing to encourage women in the decision to initiate and maintain breastfeeding her child.

College factors that influence drinking.

Science.gov (United States)

Presley, Cheryl A; Meilman, Philip W; Leichliter, Jami S

2002-03-01

The purpose of this article is to examine the aspects of collegiate environments, rather than student characteristics, that influence drinking. Unfortunately, the existing literature is scant on this topic. A literature review of articles primarily published within the last 10 years, along with some earlier "landmark" studies of collegiate drinking in the United States, was conducted to determine institutional factors that influence the consumption of alcohol. In addition, a demonstration analysis of Core Alcohol and Drug Survey research findings was conducted to further elucidate the issues. Several factors have been shown to relate to drinking: (1) organizational property variables of campuses, including affiliations (historically black institutions, women's institutions), presence of a Greek system, athletics and 2- or 4-year designation; (2) physical and behavioral property variables of campuses, including type of residence, institution size, location and quantity of heavy episodic drinking; and (3) campus community property variables, including pricing and availability and outlet density. Studies, however, tend to look at individual variables one at a time rather than in combination (multivariate analyses). Some new analyses, using Core Alcohol and Drug Survey data sets, are presented as examples of promising approaches to future research. Given the complexities of campus environments, it continues to be a challenge to the field to firmly establish the most compelling institutional and environmental factors relating to high-risk collegiate drinking.

Overview of factors influencing the secondary market

International Nuclear Information System (INIS)

Bleistine, P.A.

1982-01-01

The major factor influencing secondary trading for the last few years has been the large contractural commitments built up by consumers for reactor programs which have proven to be unrealistic. The situation has intensified as a result of utilities needing to generate capital through inventory liquidation or reductions. The flexibilities in most contracts are inadequate to match the types of external and/or internal factors faced by the industry. This situation also suggests the need for secondary markets to help the industry adjust to unforeseen difficulties. They are very active markets at this time, but their influence in relation to the long-term method of doing business should not be exaggerated

Factors influencing job satisfaction of oncology nurses over time.

Science.gov (United States)

Cummings, Greta; Olson, Karin; Raymond-Seniuk, Christy; Lo, Eliza; Masaoud, Elmabrok; Bakker, Debra; Fitch, Margaret; Green, Esther; Butler, Lorna; Conlon, Michael

2013-01-01

In this study, we tested a structural equation model to examine work environment factors related to changes in job satisfaction of oncology nurses between 2004 and 2006. Relational leadership and good physician/nurse relationships consistently influenced perceptions of enough RNs to provide quality care, and freedom to make patient care decisions, which, in turn, directly influenced nurses' job satisfaction over time. Supervisor support in resolving conflict and the ability to influence patient care outcomes were significant influences on job satisfaction in 2004, whereas, in 2006, a clear philosophy of nursing had a greater significant influence. Several factors that influence job satisfaction of oncology nurses in Canada have changed over time, which may reflect changes in work environments and work life. These findings suggest opportunities to modify work conditions that could improve nurses' job satisfaction and work life.

Would Engineers Need Non-technical Skills or Non-technical Competences or Both?

Directory of Open Access Journals (Sweden)

Velli Parts

2013-04-01

Full Text Available Normal 0 21 MicrosoftInternetExplorer4 Two main competence approaches are under the discussion. There is evidence that graduates do not fully perceive and/or underestimate the influence of non-technical competences on their employability. An understanding of the necessity of non-technical competences develops after a graduate has already been hired and is working at that job.

Factors influencing warfarin control in Australia and Singapore.

Science.gov (United States)

Bernaitis, Nijole; Ching, Chi Keong; Teo, Siew Chong; Chen, Liping; Badrick, Tony; Davey, Andrew K; Crilly, Julia; Anoopkumar-Dukie, Shailendra

2017-09-01

Warfarin is widely used for patients with non-valvular atrial fibrillation (NVAF). Variations in warfarin control, as measured by time in therapeutic range (TTR), have been reported across different regions and ethnicities, particularly between Western and Asian countries. However, there is limited data on comparative factors influencing warfarin control in Caucasian and Asian patients. Therefore, the aim of this study was to determine warfarin control and potential factors influencing this in patients with NVAF in Australia and Singapore. Retrospective data was collected for patients receiving warfarin for January to June 2014 in Australia and Singapore. TTR was calculated for individuals with mean patient TTR used for analysis. Possible influential factors on TTR were analysed including age, gender, concurrent co-morbidities, and concurrent medication. The mean TTR was significantly higher in Australia (82%) than Singapore (58%). At both sites, chronic kidney disease significantly lowered this TTR. Further factors influencing control were anaemia and ageWarfarin control was significantly higher in Australia compared to Singapore, however chronic kidney disease reduced control at both sites. The different levels of control in these two countries, together with patient factors further reducing control may impact on anticoagulant choice in these countries with better outcomes from warfarin in Australia compared to Singapore. Copyright © 2017 Elsevier Ltd. All rights reserved.

Clinical factors influencing participation in society after successful kidney transplantation

NARCIS (Netherlands)

van der Mei, S.F.; Groothoff, J.W.; van Sonderen, E.L.P.; van den Heuvel, W.J.A.; de Jong, P.E.; van Son, W.J.

2006-01-01

Background. Little information is available on the degree of actual social functioning after successful kidney transplantation. Moreover, information on factors that influence participation in social activities is scarce. The aim of this study was to examine the influence of clinical factors on

Factors influencing home care nurse intention to remain employed.

Science.gov (United States)

Tourangeau, Ann; Patterson, Erin; Rowe, Alissa; Saari, Margaret; Thomson, Heather; MacDonald, Geraldine; Cranley, Lisa; Squires, Mae

2014-11-01

To identify factors affecting Canadian home care nurse intention to remain employed (ITR). In developed nations, healthcare continues to shift into community settings. Although considerable research exists on examining nurse ITR in hospitals, similar research related to nurses employed in home care is limited. In the face of a global nursing shortage, it is important to understand the factors influencing nurse ITR across healthcare sectors. A qualitative exploratory descriptive design was used. Focus groups were conducted with home care nurses. Data were analysed using qualitative content analysis. Six categories of influencing factors were identified by home care nurses as affecting ITR: job characteristics; work structures; relationships/communication; work environment; nurse responses to work; and employment conditions. Findings suggest the following factors influence home care nurse ITR: having autonomy; flexible scheduling; reasonable and varied workloads; supportive work relationships; and receiving adequate pay and benefits. Home care nurses did not identify job satisfaction as a single concept influencing ITR. Home care nursing management should support nurse autonomy, allow flexible scheduling, promote reasonable workloads and create opportunities for team building that strengthen supportive relationships among home care nurses and other health team members. © 2013 John Wiley & Sons Ltd.

Technical match characteristics and influence of body anthropometry on playing performance in male elite team handball.

Science.gov (United States)

Michalsik, Lars Bojsen; Madsen, Klavs; Aagaard, Per

2015-02-01

Modern team handball match-play imposes substantial physical and technical demands on elite players. However, only limited knowledge seems to exist about the specific working requirements in elite team handball. Thus, the purpose of this study was to examine the physical demands imposed on male elite team handball players in relation to playing position and body anthropometry. Based on continuous video recording of individual players during elite team handball match-play (62 tournament games, ∼4 players per game), computerized technical match analysis was performed in male elite team handball players along with anthropometric measurements over a 6 season time span. Technical match activities were distributed in 6 major types of playing actions (shots, breakthroughs, fast breaks, tackles, technical errors, and defense errors) and further divided into various subcategories (e.g., hard or light tackles, type of shot, claspings, screenings, and blockings). Players showed 36.9 ± 13.1 (group mean ± SD) high-intense technical playing actions per match with a mean total effective playing time of 53.85 ± 5.87 minutes. In offense, each player performed 6.0 ± 5.2 fast breaks, received 34.5 ± 21.3 tackles in total, and performed in defense 3.7 ± 3.5 blockings, 3.9 ± 3.0 claspings, and 5.8 ± 3.6 hard tackles. Wing players (84.5 ± 5.8 kg, 184.9 ± 5.7 cm) were less heavy and smaller (p handball match-play is characterized by a high number of short-term, high-intense intermittent technical playing actions. Indications of technical fatigue were observed. Physical demands differed between playing positions with wing players performing more fast breaks and less physical confrontations with opponent players than backcourt players and pivots. Body anthropometry seemed to have an important influence on playing performance because it is highly related to playing positions. The present observations suggest that male elite team handball players should implement more position

Environmental factors influencing fluctuation of share prices on ...

African Journals Online (AJOL)

Environmental factors influencing fluctuation of share prices on Nigeria stock exchange market. ... What are these environmental variables that affect the fluctuation of share prices in Nigeria? ... The results show inflation, money supply, total deficits index of industrial production, interest rate and GDP influence stock prices.

Factors That Influence Running Intensity in Interchange Players in Professional Rugby League.

Science.gov (United States)

Delaney, Jace A; Thornton, Heidi R; Duthie, Grant M; Dascombe, Ben J

2016-11-01

Rugby league coaches adopt replacement strategies for their interchange players to maximize running intensity; however, it is important to understand the factors that may influence match performance. To assess the independent factors affecting running intensity sustained by interchange players during professional rugby league. Global positioning system (GPS) data were collected from all interchanged players (starters and nonstarters) in a professional rugby league squad across 24 matches of a National Rugby League season. A multilevel mixed-model approach was employed to establish the effect of various technical (attacking and defensive involvements), temporal (bout duration, time in possession, etc), and situational (season phase, recovery cycle, etc) factors on the relative distance covered and average metabolic power (P met ) during competition. Significant effects were standardized using correlation coefficients, and the likelihood of the effect was described using magnitude-based inferences. Superior intermittent running ability resulted in very likely large increases in both relative distance and P met . As the length of a bout increased, both measures of running intensity exhibited a small decrease. There were at least likely small increases in running intensity for matches played after short recovery cycles and against strong opposition. During a bout, the number of collision-based involvements increased running intensity, whereas time in possession and ball time out of play decreased demands. These data demonstrate a complex interaction of individual- and match-based factors that require consideration when developing interchange strategies, and the manipulation of training loads during shorter recovery periods and against stronger opponents may be beneficial.

Main clinical, therapeutic and technical factors related to patient's maximum skin dose in interventional cardiology procedures

Science.gov (United States)

Journy, N; Sinno-Tellier, S; Maccia, C; Le Tertre, A; Pirard, P; Pagès, P; Eilstein, D; Donadieu, J; Bar, O

2012-01-01

Objective The study aimed to characterise the factors related to the X-ray dose delivered to the patient's skin during interventional cardiology procedures. Methods We studied 177 coronary angiographies (CAs) and/or percutaneous transluminal coronary angioplasties (PTCAs) carried out in a French clinic on the same radiography table. The clinical and therapeutic characteristics, and the technical parameters of the procedures, were collected. The dose area product (DAP) and the maximum skin dose (MSD) were measured by an ionisation chamber (Diamentor; Philips, Amsterdam, The Netherlands) and radiosensitive film (Gafchromic; International Specialty Products Advanced Materials Group, Wayne, NJ). Multivariate analyses were used to assess the effects of the factors of interest on dose. Results The mean MSD and DAP were respectively 389 mGy and 65 Gy cm−2 for CAs, and 916 mGy and 69 Gy cm−2 for PTCAs. For 8% of the procedures, the MSD exceeded 2 Gy. Although a linear relationship between the MSD and the DAP was observed for CAs (r=0.93), a simple extrapolation of such a model to PTCAs would lead to an inadequate assessment of the risk, especially for the highest dose values. For PTCAs, the body mass index, the therapeutic complexity, the fluoroscopy time and the number of cine frames were independent explanatory factors of the MSD, whoever the practitioner was. Moreover, the effect of technical factors such as collimation, cinematography settings and X-ray tube orientations on the DAP was shown. Conclusion Optimising the technical options for interventional procedures and training staff on radiation protection might notably reduce the dose and ultimately avoid patient skin lesions. PMID:22457404

An investigation on factors influencing on human resources productivity

Directory of Open Access Journals (Sweden)

Masoumeh Seifi Divkolaii

2014-05-01

Full Text Available Human resources development is one of the most important components of any organization and detecting important factors influencing on human resources management plays essential role on the success of the firms. In this paper, we present an empirical investigation to determine different factors influencing productivity of human resources of Islamic Republic of Iran Broadcasting (IRIB in province of Mazandaran, Iran. The study uses analytical hierarchy process (AHP to rank 17 important factors and determines that personal characteristics were the most important factors followed by management related factors and environmental factors. In terms of personal characteristics, job satisfaction plays essential role on human resources development. In terms of managerial factors, paying attention on continuous job improvement by receiving appropriate training is the most important factor followed by welfare facilities for employees and using a system of reward/punishment in organization. Finally, in terms of environmental factors, occupational safety is number one priority followed by organizational rules and regulations.

THE INFLUENCE OF CORPORATE SPECIFIC FACTORS UPON FINANCING DECISIONS

Directory of Open Access Journals (Sweden)

Lacatus Viorel-Dorin

2013-07-01

Full Text Available The purpose of this paper is to analyze the existing theories for the capital structure of a corporation and to determine the factors that influence the financing decisions of Romanian corporations. The gearing ratios vary a lot among Romanian corporations pointing out the fact that the internal specific factors are the ones with a greater impact upon their capital structure, and not the external factors. Our empiric research evaluates the determining factors for the debt ratio (total debt/total assets of some Romanian corporations, focusing on its explanatory variables by including them within simple and multiple econometric models. The panel data indicators computed for the companies in the Cluj area listed on the Bucharest Stock Exchange were evaluated with the OLS and FEM techniques.The results have been interpreted, pointing out that company size and asset turnover seem to have a positive influence upon the debt ratio of selected companies, while profitability and liquidity seem to influence the debt ratio of selected companies negatively.

An empirical research on the influencing factors of regional CO2 emissions: Evidence from Beijing city, China

International Nuclear Information System (INIS)

Wang, Zhaohua; Yin, Fangchao; Zhang, Yixiang; Zhang, Xian

2012-01-01

Highlights: ► We adapt STIRPAT model to regional context and conduct PLS regress analysis. ► Energy technology related patent is innovatively used to measure technical factors. ► Urbanization level has the greatest interpretative ability for CO 2 emissions. ► We do not find evidence of Environmental Kuznets Curve in Beijing. ► Beijing should focus more on tertiary industry and residential energy consumption. -- Abstract: In order to further study the realization of carbon intensity target, find the key influencing factors of CO 2 emissions, and explore the path of developing low-carbon economy, this paper empirically studied the influences of urbanization level, economic level, industry proportion, tertiary industry proportion, energy intensity and R and D output on CO 2 emissions in Beijing using improved STIRPAT (stochastic impacts by regression on population, affluence and technology) model. The model is examined using partial least square regression. Results show that urbanization level, economic level and industry proportion positively influence the CO 2 emissions, while tertiary industry proportion, energy intensity and R and D output negatively do. Urbanization level is the main driving factor of CO 2 emissions, and tertiary industry proportion is the main inhibiting factor. In addition, along with the growth of per capita GDP, the increase of CO 2 emissions does not follow the Environmental Kuznets Curve model. Based on these empirical findings and the specific circumstances of Beijing, we provide some policy recommendations on how to reduce carbon intensity. Beijing should pay more attention to tertiary industry and residential energy consumption for carbon emission reduction. It is necessary to establish a comprehensive evaluation index of social development. Investing more capital on carbon emission reduction science and technology, and promoting R and D output is also an efficient way to reduce CO 2 emissions.

Maturity of hospital information systems: Most important influencing factors.

Science.gov (United States)

Vidal Carvalho, João; Rocha, Álvaro; Abreu, António

2017-07-01

Maturity models facilitate organizational management, including information systems management, with hospital organizations no exception. This article puts forth a study carried out with a group of experts in the field of hospital information systems management with a view to identifying the main influencing factors to be included in an encompassing maturity model for hospital information systems management. This study is based on the results of a literature review, which identified maturity models in the health field and relevant influencing factors. The development of this model is justified to the extent that the available maturity models for the hospital information systems management field reveal multiple limitations, including lack of detail, absence of tools to determine their maturity and lack of characterization for stages of maturity structured by different influencing factors.

FACTORS INFLUENCING THE PURCHASE DECISION OF ORGANIC TOFU

Directory of Open Access Journals (Sweden)

Tantry Nugroho

2015-09-01

Full Text Available This study aimed to analyze the factors that influence consumers in making the decision to buy organic tofu. The theory of factors that influence the purchasing behavior developed by Kotler was used as the analytical tool, and these factors include cultural factors, social factors, personal factors, psychological factors and purchasing process. These data were collected through interview techniques and analyzed descriptively using multinomial logistic regression. The characteristics of respondents indicated the consumers who never bought organic tofu are mostly at the age of 26-35 years old and university graduates, do not work, have an expenditure from Rp 1 million to Rp 2.5 million, are highly knowledge, and have the highest scores on the perceptions on sustainable and environmentally friendly organic farming, health benefits, and a more expensive price. There are a number of factors that influence consumers in making purchase decisions of organic tofu including age, education, knowledge and product external factors. The consumers who are potentially interested in purchasing the organic tofu are at the age of 36–50 years old, university graduates, highly knowledgeable in food and organic tofu products, because the higher the education and knowledge, the greater the interest in buying the products, and they approved of the external products such as price, advertising, personal selling and places of selling which are also potentially equal. The managerial implications for the business agents of tofu organic product is that they must be more active in assuring the consumers that these products are good for them by creating a blog, an ad in the local paper, or a pamphlet containing information of the product.Keywords: purchase decision, logistic regression, organic tofu product, purchasing interest

The socio-technical system and nuclear safety

International Nuclear Information System (INIS)

Stefanescu, Petre; Mihailescu, Nicolae; Dragusin, Octavian

1999-01-01

In the field of nuclear safety there have been defined notions like 'technical factors' and 'human factors'. The technical factors depend on designing and manufacturing of components/equipment, actually depend on the people's work. The study of human factors consists in analyzing and recommending the terms that allow an individual to be a reliable and safety agent. Accordingly, he/she is placed in working conditions corresponding to human abilities, associating the means of three levels: - designing, i.e. the action upon the technical system and upon work organization; - correction, i.e. the action upon the evolution of the technical system and organizing; - formation/training, i.e. action upon operators. The paper presents a characterization of the socio-technical system and on this basis discusses the issue of individual adjustment to the socio-technical system and reciprocally, the issue of the socio-technical system adjustment to the individual. Concepts as: ergonomics, physical medium, man/machine interface and support of the operator, man/machine task sharing, the work organizing are put in relation with the central subject, the nuclear safety

A Review of Factors Influencing Athletes' Food Choices.

Science.gov (United States)

Birkenhead, Karen L; Slater, Gary

2015-11-01

Athletes make food choices on a daily basis that can affect both health and performance. A well planned nutrition strategy that includes the careful timing and selection of appropriate foods and fluids helps to maximize training adaptations and, thus, should be an integral part of the athlete's training programme. Factors that motivate food selection include taste, convenience, nutrition knowledge and beliefs. Food choice is also influenced by physiological, social, psychological and economic factors and varies both within and between individuals and populations. This review highlights the multidimensional nature of food choice and the depth of previous research investigating eating behaviours. Despite numerous studies with general populations, little exploration has been carried out with athletes, yet the energy demands of sport typically require individuals to make more frequent and/or appropriate food choices. While factors that are important to general populations also apply to athletes, it seems likely, given the competitive demands of sport, that performance would be an important factor influencing food choice. It is unclear if athletes place the same degree of importance on these factors or how food choice is influenced by involvement in sport. There is a clear need for further research exploring the food choice motives of athletes, preferably in conjunction with research investigating dietary intake to establish if intent translates into practice.

Influence of Macroeconomic Factors on Residential Property ...

African Journals Online (AJOL)

Sultan

exerted by macroeconomic factors on residential property returns in Abuja. The backward .... explanatory power and positive influence of employment and ...... Project. Management In Property Development: the Nigeria experience. Ibadan:.

Factors Influencing Self Employment Media Service Providers ...

African Journals Online (AJOL)

Factors Influencing Self Employment Media Service Providers among Tertiary ... role stereotype and common business practices on media self employment in ... Sex, Psycho-social Characteristics, self Employment, Providing Media Services.

Factors influencing societal response of nanotechnology : an expert stakeholder analysis

OpenAIRE

Gupta, N.; Fischer, A.R.H.; Lans, van der, I.A.; Frewer, L.J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured i...

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

OpenAIRE

Gupta, Nidhi; Fischer, Arnout R. H.; van der Lans, Ivo A.; Frewer, Lynn J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured i...

Factors Influencing Choice of Inguinal Hernia Repair Technique

African Journals Online (AJOL)

This study sought to highlight factors that may influence ... Experienced peers play a major role in training on the various repair ... Reasons influencing choice of repair technique include training ... (after appendectomy) accounting for 10 to 15% of all surgical ..... in medical school [as undergraduate students or as residents].

Factors Influencing Information and Communication Technology ...

African Journals Online (AJOL)

Information and communication technology (ICT) is a veritable tool for sustainable agricultural development in Nigeria. This paper analyzed the factors that influenced ICT use by women research scientists in the Universities of Agriculture in Nigeria. Simple random sampling technique was used to select 40 respondents per ...

Factors Influencing Part-time Faculty Engagement With Online Nursing Programs.

Science.gov (United States)

Reneau, Margaret; Wallace, Cara; Claywell, Lora; Price, Jill; Burdi, Melissa; Trybulski, Joanne

2018-03-28

This research investigated factors that influenced the engagement of part-time faculty teaching in online nursing programs with their institutions. Of the 257 part-time faculty surveyed, the most significant factor was being supported in decisions regarding student issues, followed by institutional commitment to quality online education. Compensation was moderately influential; a negative factor was requiring too frequent meetings. Understanding factors that influence the engagement of part-time faculty teaching in online nursing programs can help leaders of online programs attract and retain experienced, highly skilled faculty.

FACTORS INFLUENCING BRAND EQUITY OF BALI AS A TOURISM DESTINATION

Directory of Open Access Journals (Sweden)

I Ketut Surya Diarta

2016-03-01

Full Text Available Globally, competition among tourism destinations is more stringent in getting foreign tourists, including Bali. One effort to win the competition is increasing destination brand equity through maintaining its influencing factors and gaining tourist positive behavior toward destination. This effort, in long run, will increase and stabilize destination revenue and sustainability. This research aims to analyze factors influencing brand equity of Bali as a tourism destination. This research was conducted in Bali’s five major tourism objects. The 240 foreign tourists were chosen as respondents through convenience sampling technique. Data were analyzed using factor analysis. The results showed that factors that significantly influenced Bali brand equity were: symbolic and experiential benefit factor, direct and indirect destinations attributes, destination reliability and tangibility, assurance and empathy, brand destinations recognition and recall, destinations common psychological attributes, destination common functional attributes, unique functional attributes, behavioral loyalty, destination awareness, and attitudinal loyalty. Given the fluctuative nature of brand equity, Bali needs a consistent effort to maintain or to enhance brand equity of Bali as a tourism destination. Maintaining the dominant factors that influence the strength of brand equity can be used as a basis to develop destination branding strategy to expand market segment,  choose the right target market, and anchoring destination position in world market competition.

Factors That Influence the Practice of Elective Induction of Labor

Science.gov (United States)

Moore, Jennifer; Low, Lisa Kane

2012-01-01

Elective induction of labor has been linked to increased rates of prematurity and rising rates of cesarean birth. The purpose of this investigation was to evaluate current trends in induction of labor scholarship focusing on evidence-based factors that influence the practice of elective induction. A key word search was conducted to identify studies on the practice of elective induction of labor. Analysis of the findings included clustering and identification of recurrent themes among the articles with 3 categories being identified. Under each category, the words/phrases were further clustered until a construct could be named. A total of 49 articles met inclusion criteria: 7 patient, 6 maternity care provider, and 4 organization factors emerged. Only 4 of the articles identified were evidence based. Patient factors were divided into preferences/convenience, communication, fear, pressure/influence, trust, external influences, and technology. Provider factors were then divided into practice preferences/convenience, lack of information, financial incentives, fear, patient desire/demand, and technology. Organization factors were divided into lack of enforcement/accountability, hospital culture, scheduling of staff, and market share issues. Currently, there is limited data-based information focused on factors that influence elective induction of labor. Despite patient and provider convenience/preferences being cited in the literature, the evidence does not support this practice. PMID:22843006

Variations of Histone Modification Patterns: Contributions of Inter-plant Variability and Technical Factors

Directory of Open Access Journals (Sweden)

Sylva Brabencová

2017-12-01

Full Text Available Inter-individual variability of conspecific plants is governed by differences in their genetically determined growth and development traits, environmental conditions, and adaptive responses under epigenetic control involving histone post-translational modifications. The apparent variability in histone modifications among plants might be increased by technical variation introduced in sample processing during epigenetic analyses. Thus, to detect true variations in epigenetic histone patterns associated with given factors, the basal variability among samples that is not associated with them must be estimated. To improve knowledge of relative contribution of biological and technical variation, mass spectrometry was used to examine histone modification patterns (acetylation and methylation among Arabidopsis thaliana plants of ecotypes Columbia 0 (Col-0 and Wassilewskija (Ws homogenized by two techniques (grinding in a cryomill or with a mortar and pestle. We found little difference in histone modification profiles between the ecotypes. However, in comparison of the biological and technical components of variability, we found consistently higher inter-individual variability in histone mark levels among Ws plants than among Col-0 plants (grown from seeds collected either from single plants or sets of plants. Thus, more replicates of Ws would be needed for rigorous analysis of epigenetic marks. Regarding technical variability, the cryomill introduced detectably more heterogeneity in the data than the mortar and pestle treatment, but mass spectrometric analyses had minor apparent effects. Our study shows that it is essential to consider inter-sample variance and estimate suitable numbers of biological replicates for statistical analysis for each studied organism when investigating changes in epigenetic histone profiles.

Variations of Histone Modification Patterns: Contributions of Inter-plant Variability and Technical Factors.

Science.gov (United States)

Brabencová, Sylva; Ihnatová, Ivana; Potěšil, David; Fojtová, Miloslava; Fajkus, Jiří; Zdráhal, Zbyněk; Lochmanová, Gabriela

2017-01-01

Inter-individual variability of conspecific plants is governed by differences in their genetically determined growth and development traits, environmental conditions, and adaptive responses under epigenetic control involving histone post-translational modifications. The apparent variability in histone modifications among plants might be increased by technical variation introduced in sample processing during epigenetic analyses. Thus, to detect true variations in epigenetic histone patterns associated with given factors, the basal variability among samples that is not associated with them must be estimated. To improve knowledge of relative contribution of biological and technical variation, mass spectrometry was used to examine histone modification patterns (acetylation and methylation) among Arabidopsis thaliana plants of ecotypes Columbia 0 (Col-0) and Wassilewskija (Ws) homogenized by two techniques (grinding in a cryomill or with a mortar and pestle). We found little difference in histone modification profiles between the ecotypes. However, in comparison of the biological and technical components of variability, we found consistently higher inter-individual variability in histone mark levels among Ws plants than among Col-0 plants (grown from seeds collected either from single plants or sets of plants). Thus, more replicates of Ws would be needed for rigorous analysis of epigenetic marks. Regarding technical variability, the cryomill introduced detectably more heterogeneity in the data than the mortar and pestle treatment, but mass spectrometric analyses had minor apparent effects. Our study shows that it is essential to consider inter-sample variance and estimate suitable numbers of biological replicates for statistical analysis for each studied organism when investigating changes in epigenetic histone profiles.

Factors Influencing Tacit Knowledge in Construction

Directory of Open Access Journals (Sweden)

Jawahar Nesan

2012-11-01

Full Text Available Increased complexity of the construction business and consequentuse of new management concepts and technologies ledconstruction organisations to focus more on the transfer of explicitknowledge. However, it is the tacit knowledge that determinesthe construction companies’ competitiveness in a business thatis driven by turbulent market conditions and customers’ everincreasingdemands. This paper highlights the importance of tacitknowledge sharing in construction, explores the challenges andopportunities to efficiently share tacit knowledge, and based on theliterature review identifies some critical factors that influence tacitknowledge in construction. It is argued that employees’ knowledgesharing (learning behaviours are influenced by work practices thatare borne by respective organisational behaviours. Organisational,cultural, and project characteristics that facilitate knowledgesharing among construction employees are explored and thepractices that influence the construction employee behaviour insharing tacit knowledge are highlighted.

Multilevel factors influencing preterm birth in an urban setting

Directory of Open Access Journals (Sweden)

Saba W. Masho

2014-01-01

Full Text Available Racial disparity in preterm is a major problem in the US. Although significant strides have been made in identifying some of the risk factors, the complexities between community and individual factors are not understood. This study examines the influence of individual and community level factors affecting preterm birth among Black and White women in an urban setting. A 10-year live birth registry dataset from a mid-sized, racially diverse city was analyzed (N = 30,591. Data were geocoded and merged with block group level Census data. Five hierarchical models were examined using PROC GLIMMIX. Education, illicit drug use, pregnancy complications, previous preterm birth, paternal presence, inadequate and adequate plus prenatal care, and poverty were associated with preterm births in both Blacks and Whites. In Black women, increasing maternal age, maternal smoking, and a previous infant death were significant predictors of preterm births, which was not the case for White women. Residing in medium or high poverty neighborhoods resulted in 19% and 28% higher odds, respectively, of preterm birth for Black women. In addition to individual level factors, neighborhood poverty is an important risk factor influencing preterm birth. It is essential to engage multisectoral agencies in addressing factors influencing preterm birth.

Factors influencing purchase intention towards consumer-to-consumer e-commerce

OpenAIRE

Muhammad Dachyar; Liska Banjarnahor

2017-01-01

Purpose: This study explores factors that influence consumer’s purchase intention at three consumer-to-consumer (C2C) e-commerce companies in Indonesia. Design/methodology: 5 Expert opinions are used to determine the indicators of each factor and the Structural Equation Modelling (SEM) method is used to analyze the empirical data of 400 respondents for each company. Findings: It is found different significant factors that influence customer’s purchase intention in each compa...

Socio-Economic Factors Influencing Entrepreneurship Among ...

African Journals Online (AJOL)

Socio-Economic Factors Influencing Entrepreneurship Among Women In Fishing Communities In Ondo State, Nigeria. ... The study found that overall entrepreneurial rating of the study group is low, essential input can not be easily gotten in the area, the respondents has large household size thereby had a large dependents ...

Factors Influencing Donor Partnership Effectiveness | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-11-03

Nov 3, 2010 ... A two-dimensional tool probing eight factors that influence partnership performance was developed, and used in conjunction with a Partnering Process Model, to guide the preparation of the case studies. The incorporation of the temporality dimension is quite novel and adds to the understanding and ...

Community Factors Influencing Birth Spacing among Married ...

African Journals Online (AJOL)

AJRH Managing Editor

level factors on birth spacing behaviour in Uganda and Zimbabwe, to ... environments as potential influences on birth spacing ..... health: multivariable cross-country analysis, MACRO ... Equity monitoring for social marketing: Use of wealth.

Factors Influencing Adoption of Cocoa Technologies Disseminated ...

African Journals Online (AJOL)

Factors Influencing Adoption of Cocoa Technologies Disseminated by Olam Organisation in ... Journal of Agricultural Research and Development ... level, household size, no of farm family assisting on the farm, management system adopted, ...

Habitat factors influencing the distribution of Cymbopogon validus in ...

African Journals Online (AJOL)

Habitat factors influencing the distribution of Cymbopogon validus in Mkambati Game Reserve, Transkei. ... disturbance; game reserve; grassland; grasslands; habitat conditions; habitat factors; mkambati game ... AJOL African Journals Online.

Safety Management and Risk Modelling in Aviation : The challenge of quantifying management influences

NARCIS (Netherlands)

Lin, P.H.

2011-01-01

Aviation accidents result from a combination of many different causal factors ( human errors, technical failures, environmental and organisational influences). Increasing interest over the past two decades in causal modelling of organisational factors has been motivated by the desire to understand

Factors that influence household and individual clothing expenditure ...

African Journals Online (AJOL)

S Blignaut

Contributing factors are the growth of low-priced apparel ... determine which factors influence household and individual ... explicitly deals with this concept. .... The income elasticity for clothing for the two-parent ..... Nelson (1989) found that mothers with less than a .... fashion consciousness and style preferences should.

Factors influencing internal color of cooked meats.

Science.gov (United States)

Suman, Surendranath P; Nair, Mahesh N; Joseph, Poulson; Hunt, Melvin C

2016-10-01

This manuscript overviews the pertinent research on internal color of uncured cooked meats, biochemical processes involved in meat cookery, and fundamental mechanisms governing myoglobin thermal stability. Heat-induced denaturation of myoglobin, responsible for the characteristic dull-brown color of cooked meats, is influenced by a multitude of endogenous (i.e., pH, muscle source, species, redox state) and exogenous (i.e., packaging, ingredients, storage) factors. The interactions between these factors critically influence the internal cooked color and can confuse the consumers, who often perceive cooked color to be a reliable indicator for doneness and safety. While certain phenomena in cooked meat color are cosmetic in nature, others can mislead consumers and result in foodborne illnesses. Research in meat color suggests that processing technologies and cooking practices in industry as well as households influence the internal cooked color. Additionally, the guidelines of many international public health and regulatory authorities recommend using meat thermometers to determine safe cooking endpoint temperature and to ensure product safety. Copyright © 2016 Elsevier Ltd. All rights reserved.

New usable technical specifications

International Nuclear Information System (INIS)

Webster, S.A.; Tomasi, L.T.; Bernier, R.A.

1989-01-01

After 2 yr of preparation, 1988 finally saw the nuclear industry writing operator-oriented technical specifications. This effort is a continuation of previous efforts to develop improved and usable standard technical specifications (STSs), and is being conducted by the four nuclear steam supply system vendor owners' groups under the auspices of the Nuclear Management Resources Council. Each participant is currently preparing a set of improved STSs based on a writer's guide that was developed through a combined industry effort. In May of 1987, a Human Factors Improvements to Technical Specifications (HFITS) task group was formed to prepare a writer's guide for improved, industrywide STSs. This task group was composed of two representatives from each owners' group, one with a human factors background and one with some operations background. Two documents were prepared in 6 months, a human factors report laying the groundwork for the considerations to go into technical specifications and a writer's guide for their preparation. This paper reports on the application of this writer's guide to the writing of improved STS

Factors influencing selection of office furniture by corporations and universities

Science.gov (United States)

R. Bruce Anderson

1976-01-01

Evaluation of the factors that influence the selection of office furniture by large corporations and universities shows that quality, appearance, and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the appearance of the furniture were the key factors in the purchase of wooden furniture.

Cerebrospinal Fluid Pressure: Revisiting Factors Influencing Optic Nerve Head Biomechanics

Science.gov (United States)

Hua, Yi; Voorhees, Andrew P.; Sigal, Ian A.

2018-01-01

Purpose To model the sensitivity of the optic nerve head (ONH) biomechanical environment to acute variations in IOP, cerebrospinal fluid pressure (CSFP), and central retinal artery blood pressure (BP). Methods We extended a previously published numerical model of the ONH to include 24 factors representing tissue anatomy and mechanical properties, all three pressures, and constraints on the optic nerve (CON). A total of 8340 models were studied to predict factor influences on 98 responses in a two-step process: a fractional factorial screening analysis to identify the 16 most influential factors, followed by a response surface methodology to predict factor effects in detail. Results The six most influential factors were, in order: IOP, CON, moduli of the sclera, lamina cribrosa (LC) and dura, and CSFP. IOP and CSFP affected different aspects of ONH biomechanics. The strongest influence of CSFP, more than twice that of IOP, was on the rotation of the peripapillary sclera. CSFP had similar influence on LC stretch and compression to moduli of sclera and LC. On some ONHs, CSFP caused large retrolamina deformations and subarachnoid expansion. CON had a strong influence on LC displacement. BP overall influence was 633 times smaller than that of IOP. Conclusions Models predict that IOP and CSFP are the top and sixth most influential factors on ONH biomechanics. Different IOP and CSFP effects suggest that translaminar pressure difference may not be a good parameter to predict biomechanics-related glaucomatous neuropathy. CON may drastically affect the responses relating to gross ONH geometry and should be determined experimentally. PMID:29332130

Is the technical performance of young soccer players influenced by hormonal status, sexual maturity, anthropometric profile, and physical performance?

Science.gov (United States)

Moreira, Alexandre; Massa, Marcelo; Thiengo, Carlos R; Rodrigues Lopes, Rafael Alan; Lima, Marcelo R; Vaeyens, Roel; Barbosa, Wesley P; Aoki, Marcelo S

2017-12-01

The aim of this study was to examine the influence of hormonal status, anthropometric profile, sexual maturity level, and physical performance on the technical abilities of 40 young male soccer players during small-sided games (SSGs). Anthropometric profiling, saliva sampling, sexual maturity assessment (Tanner scale), and physical performance tests (Yo-Yo and vertical jumps) were conducted two weeks prior to the SSGs. Salivary testosterone was determined by the enzyme-linked immunosorbent assay method. Technical performance was determined by the frequency of actions during SSGs. Principal component analyses identified four technical actions of importance: total number of passes, effectiveness, goal attempts, and total tackles. A multivariate canonical correlation analysis was then employed to verify the prediction of a multiple dependent variables set (composed of four technical actions) from an independent set of variables, composed of testosterone concentration, stage of pubic hair and genitalia development, vertical jumps and Yo-Yo performance. A moderate-to-large relationship between the technical performance set and the independent set was observed. The canonical correlation was 0.75 with a canonical R 2 of 0.45. The highest structure coefficient in the technical performance set was observed for tackles (0.77), while testosterone presented the highest structure coefficient (0.75) for the variables of the independent set. The current data suggest that the selected independent set of variables might be useful in predicting SSG performance in young soccer players. Coaches should be aware that physical development plays a key role in technical performance to avoid decision-making mistakes during the selection of young players.

Factors That Influence Technology Integration in the Classroom

Science.gov (United States)

Montgomery, Maureen C.

2017-01-01

Education is one area where the use of technology has had great impact on student learning. The integration of technology in teaching and learning can significantly influence the outcome of education in the classroom. However, there are a myriad of factors that influence technology integration in the classroom. The purpose of this study was to…

Factors influencing the, selection of state office furniture

Science.gov (United States)

R. Bruce Anderson; R. Bruce Anderson

1973-01-01

Evaluation of the factors influencing the selection of office furniture by nine state governments shows that quality and purchase price have the most important influence on the purchase decision. The intended use of the furniture and the purchasing regulations of the states were key f8CbrS in the use of wood furniture.

Relative importance of natural and anthropogenic factors influencing karst rocky desertification

Science.gov (United States)

Xu, Erqi; Zhang, Hongqi

2017-04-01

As the most severe ecological issue in southwest China, karst rocky desertification (KRD) has both threatened and constrained regional sustainable development. Comprehensively understanding the relationship between the evolution of KRD and relevant driving data would provide more information to combat KRD in such complex karst environments. Past studies have been limited in quantifying the relative importance of driving factors influencing fine-scale KRD evolution, and have also lacked insight into their interactive impacts. To address these issues, we have used geographical information system techniques and a geographical detector model to explore the spatial consistency of driving factors and their interactions in relation to the evolution of KRD. Changshun County in China was selected as a representative area for the study. Nine relevant driving factors, including both natural and anthropogenic factors, were studied in regard to their relationships with KRD transformation between 2000 and 2010. Our results demonstrate the relative importance of driving data in influencing the improvement and deterioration of KRD. Lithology, soil type and road influence are identified as the leading factors. Interestingly, to our study at least, there is no significant difference between the impacts of natural and anthropogenic factors influencing KRD improvement, and even natural factors have a higher impact on KRD deterioration. Factors were found to enhance the influence of each other for KRD transformation. In particular, the results show a non-linearly enhanced effect between driving factors, which significantly aggravates KRD. New information found in our study helps to effectively control and restore areas afflicted by KRD.

An Examination of Rebuild America Partnership Accomplishments and the Factors Influencing Them

Energy Technology Data Exchange (ETDEWEB)

Schweitzer, M.

2003-10-16

The Rebuild America program was established in 1994 to accelerate the adoption of energy efficiency measures and practices in existing public facilities, commercial buildings, and multifamily housing units. More recently, the program has expanded to include new construction as well. The program encourages the formation of partnerships involving state and local governments, private businesses, and other organizations to help identify and solve problems related to energy use in buildings. Rebuild America does not directly fund actual building improvements. Instead, it provides the Rebuild Partners with the technical tools and assistance they need to plan and implement building projects and stimulates other entities to make substantial investments in energy efficiency. At the request of the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy, staff at Oak Ridge National Laboratory studied the Rebuild America program for the purpose of identifying key factors associated with successful operations. Substantial amounts of data were collected directly from Rebuild America partnerships concerning the results achieved by each of their individual projects, both committed and completed. In addition, data were collected from secondary sources on a limited number of factors describing partnership setting and characteristics. By combining these two data sets, we were able to perform statistical analyses testing the potential relationship between each partnership characteristic and each of four key results measures. The influences on successful partnership performance also were determined in another way, which allowed a broader examination of potentially important factors. Telephone interviews were conducted with representatives from 61 high-performing Rebuild America partnerships throughout the United States. The respondents were asked to identify the most important factors influencing good performance and the types of Rebuild America products

Assessment of Factors Influencing Beneficiary Participation in ...

African Journals Online (AJOL)

ISSN 0794-5698. Assessment of Factors Influencing Beneficiary Participation in Fadama II Project ... project implementation (80%) in the stages of project development. Women .... the project as they appeared to have more family burden to ...

Cloud Computing Technologies in Writing Class: Factors Influencing Students’ Learning Experience

Directory of Open Access Journals (Sweden)

Jenny WANG

2017-07-01

Full Text Available The proposed interactive online group within the cloud computing technologies as a main contribution of this paper provides easy and simple access to the cloud-based Software as a Service (SaaS system and delivers effective educational tools for students and teacher on after-class group writing assignment activities. Therefore, this study addresses the implementation of the most commonly used cloud applications, Google Docs, in a higher education course. The learning environment integrated Google Docs that students are using to develop and deploy writing assignments in between classes has been subjected to learning experience assessment. Using the questionnaire as an instrument to study participants (n=28, the system has provided an effective learning environment in between classes for the students and the instructor to stay connected. Factors influencing students’ learning experience based on cloud applications include frequency of interaction online and students’ technology experience. Suggestions to cope with challenges regarding the use of them in higher education including the technical issues are also presented. Educators are therefore encouraged to embrace cloud computing technologies as they design the course curriculum in hoping to effectively enrich students’ learning.

Psychosocial factors for influencing healthy aging in adults in Korea.

Science.gov (United States)

Han, KyungHun; Lee, YunJung; Gu, JaSung; Oh, Hee; Han, JongHee; Kim, KwuyBun

2015-03-07

Healthy aging includes physical, psychological, social, and spiritual well-being in later years. The purpose of this study is to identify the psychosocial factors influencing healthy aging and examining their socio-demographic characteristics. Perceived health status, depression, self-esteem, self-achievement, ego-integrity, participation in leisure activities, and loneliness were identified as influential factors in healthy aging. 171 Korean adults aged between 45 and 77 years-old participated in the study. Self-reporting questionnaires were used, followed by descriptive statistics and multiple regressions as inferential statistical analyses. There were significant differences between participants' general characteristics: age, education, religion, housing, hobby, and economic status. The factors related to healthy aging had positive correlation with perceived health status, self-esteem, self-achievements, and leisure activities, and negative correlation with depression and loneliness. The factors influencing healthy aging were depression, leisure activities, perceived health status, ego integrity, and self-achievements. These factors were able to explain 51.9%. According to the results, depression is the factor with the greatest influence on healthy aging. Perceived health status, ego integrity, self-achievement, self-esteem, participation of leisure activities were also influential on healthy aging as beneficial factors.

Procedural Influence on Internal and External Assessment Scores of Undergraduate Vocational and Technical Education Research Projects in Nigerian Universities

Science.gov (United States)

A. C., John; Manabete, S. S.

2015-01-01

This study sought to determine the procedural influence on internal and external assessment scores of undergraduate research projects in vocational and technical education programmes in the university under study. A survey research design was used for the conduct of this study. The population consisted of 130 lecturers and 1,847 students in the…

A brief review of salient factors influencing adult eating behaviour.

Science.gov (United States)

Emilien, Christine; Hollis, James H

2017-12-01

A better understanding of the factors that influence eating behaviour is of importance as our food choices are associated with the risk of developing chronic diseases such as obesity, CVD, type 2 diabetes or some forms of cancer. In addition, accumulating evidence suggests that the industrial food production system is a major contributor to greenhouse gas emission and may be unsustainable. Therefore, our food choices may also contribute to climate change. By identifying the factors that influence eating behaviour new interventions may be developed, at the individual or population level, to modify eating behaviour and contribute to society's health and environmental goals. Research indicates that eating behaviour is dictated by a complex interaction between physiology, environment, psychology, culture, socio-economics and genetics that is not fully understood. While a growing body of research has identified how several single factors influence eating behaviour, a better understanding of how these factors interact is required to facilitate the developing new models of eating behaviour. Due to the diversity of influences on eating behaviour this would probably necessitate a greater focus on multi-disciplinary research. In the present review, the influence of several salient physiological and environmental factors (largely related to food characteristics) on meal initiation, satiation (meal size) and satiety (inter-meal interval) are briefly discussed. Due to the large literature this review is not exhaustive but illustrates the complexity of eating behaviour. The present review will also highlight several limitations that apply to eating behaviour research.

Alternative Administrative Certification: Socializing Factors Influencing Program Choice

Science.gov (United States)

Bickmore, Dana L.; Bickmore, Steven T.; Raines, Sarah

2013-01-01

This study used an organizational socialization lens to examine factors influencing participants' decision to pursue the principalship and choice to engage in an alternate administration certification program. Through an analysis of participant focus groups and interviews, factors emerged from the codes that were compared with dimensions of…

Influence Factors of the Economic Development Level Across European Countries

OpenAIRE

Diana Ioana POPA

2016-01-01

The economic development level of a country refers to the measure of the progress in an economy that could be measured, especially through GDP or GDP per capita. The level of these indicators can be influenced by many factors as a large scale, from social and economical to environmental and government policies factors. The paper aims to investigate some of these influence factors of the economic development level, represented in this case by GDP per capita, across European countries in the...

LITERATURE REVIEW ON FACTORS INFLUENCING MILK PURCHASE BEHAVIOUR

Directory of Open Access Journals (Sweden)

Klaudia Kurajdova

2015-01-01

Full Text Available In today’s highly informed, competitive and saturated market, a key to success of any business depends on knowing consumer and his consumption patterns and recognizing and understanding factors influencing his decision-making for the purpose of developing an attractive offer of products, supporting services, communication means and other marketing tools that would fit like a glue to customer’s needs. Study of consumer behaviour belongs to a group of very wide and strong subjects of marketing attention and its examination requires ongoing approach. Milk, as one category of dairy products, belongs to the group of basic daily-consumed products characterized by relatively high purchase frequency. On the other hand, its production and consumption is experiencing certain negative trend in Slovakia what inevitably calls for a scientific attention and examination in order to reverse this unfavourable development having a negative impact on the milk companies in Slovakia. Therefore, we focus our attention on studying various factors influencing consumers when purchasing this specific product. Our research in this stage resulted in the compilation of literature review on factors influencing consumers when purchasing milk and determination of boundaries and guidelines for our future research activity

How modifiable factors influence parental decision-making about organ donation.

Science.gov (United States)

Luberda, Kamila; Cleaver, Karen

2017-11-07

A global shortage of organs from children and adults available for transplantation is compounded by the failure of next of kin to consent for organs to be donated after death. Non-modifiable and modifiable factors influence decision-making in this area. Modifiable factors are of interest when examining families' decision-making about the donation of organs from their deceased child. A scoping review was undertaken to determine how modifiable factors influence parental decision-making about organ donation. Thematic analysis identified two themes: interactions with healthcare professionals and pre-disposition to organ donation. Satisfaction with experiences of hospital care, the information provided and the way it was communicated, as well as interactions pertaining to emotional support were all found to be modifiable factors that influenced decision making. Likewise, a predisposition to organ donation and knowing the deceased's wishes were associated with the consent decision. Nurses working in critical care environments need to be able to support parents during this difficult time. This article aims to raise awareness of modifiable factors that influence parental decision-making, highlighting their relevance for children's nursing practice. ©2017 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

Emergency department crowding: factors influencing flow.

Science.gov (United States)

Arkun, Alp; Briggs, William M; Patel, Sweha; Datillo, Paris A; Bove, Joseph; Birkhahn, Robert H

2010-02-01

THE OBJECTIVE OF THIS STUDY WAS TO EVALUATE THOSE FACTORS, BOTH INTRINSIC AND EXTRINSIC TO THE EMERGENCY DEPARTMENT (ED) THAT INFLUENCE TWO SPECIFIC COMPONENTS OF THROUGHPUT: "door-to-doctor" time and dwell time. We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday) during a three-month period. Variables measured included daily ED volume, patient acuity, staffing, ED occupancy, daily admissions, ED boarder volume, hospital volume, and intensive care unit volume. Both log-rank tests and time-to-wait (survival) proportional-hazard regression models were fitted to determine which variables were most significant in predicting "door-to-doctor" and dwell times, with full account of the censoring for some patients. We captured 1,543 patients during our study period, representing 27% of total daily volume. The ED operated at an average of 85% capacity (61-102%) with an average of 27% boarding. Median "door-to-doctor" time was 1.8 hours, with the biggest influence being triage category, day of the week, and ED occupancy. Median dwell time was 5.5 hours with similar variable influences. The largest contributors to decreased patient flow through the ED at our institution were triage category, ED occupancy, and day of the week. Although the statistically significant factors influencing patient throughput at our institution involve problems with inflow, an increase in ED occupancy could be due to substantial outflow obstruction and may indicate the necessity for increased capacity both within the ED and hospital.

Factors influencing thermal tolerances of individual organisms

International Nuclear Information System (INIS)

Hutchison, V.H.

1976-01-01

The diversity of experimental methods and terminology employed by investigators to measure the effects of high temperatures on individual organisms, plus the often overlooked complexities of the holocoenotic environment, has often led to disconcerting conclusions. A plea is made for standardization of testing methods and for a wider appreciation of factors that may alter thermal tolerances. The influence of elevated temperature is grouped into three categories, lethal effects, controlling effects, and directive effects, all of which should be considered in assessing the impact of thermal effluent on organisms. In addition, the terminology (acclimation, acclimatization, adaptation, habituation, lethal temperature, critical thermal maximum, etc.) needs standardized definitions. The important factors influencing thermal effects on organisms include photoperiod, seasonal and daily cycles, geographic variation, diet, sex, breeding condition, age, life-cycle stage, salinity, chemicals, body water content and partitioning, oxygen supply, pH, innate and learned behavior, history of thermal exposure, sublethal exposure to limiting factors, and experimental methods. Examples of most of these are given to illustrate the role of temperature in the holocoenotic environmental complex of individual organisms

Factors influencing the pattern of malnutrition among acutely ill ...

African Journals Online (AJOL)

Factors influencing the pattern of malnutrition among acutely ill children presenting in ... height/length) measurements and z-scores calculated for the individual nutritional ... The factors associated with malnutrition included early introduction of ...

Predictors of technical adoption and behavioural change to transport energy-saving measures in response to climate change

International Nuclear Information System (INIS)

Aini, M.S.; Chan, S.C.; Syuhaily, O.

2013-01-01

Energy conservation can be achieved through the adoption of technical measures or the changing of one's behaviour. A survey of 201 Malaysian public personnel was conducted to examine the predictors of these two types of transport energy-saving measures in response to climate change. The results indicated that there were significant differences in the relative acceptability of both behavioural measures with respect to gender, level of education, income, knowledge of climate change and attitude. Gender, knowledge of causes of climate change and personal norm were predictors for the acceptability of technical measures, while perceived efficacy and personal norm were the factors that influenced the acceptability of behavioural measures. The results also indicated that distinctions ought to be made between technology adoption and behaviour modifications that require lifestyle changes when assessing pro-environmental intent behaviour. The implications for theory and practice are discussed. - Highlights: • A survey was conducted to examine acceptability of transport energy-saving measures. • Gender, knowledge of causes, efficacy and personal norm are predictors of technical measures. • Personal norm and perceived efficacy influenced acceptability of behavioural change. • Both measures are strongly correlated to psychological factors than to socio-demographic variables

Factors Influencing the Adoption of Minimally Invasive Surgery ...

African Journals Online (AJOL)

Background: Cost is a major concern for delivery of minimally invasive surgical technologies due to the nature of resources required. It is unclear whether factors extrinsic to technology availability impact on this uptake. Objectives: To establish the influence of institutional, patient and surgeon-related factors in the adoption of ...

Factors Influencing Indonesian Internet Users Intention on Buying Books Online

Directory of Open Access Journals (Sweden)

Beatrik Messah

2003-09-01

Full Text Available The purpose of this research is to discover and analyse factors influencing Indonesian internet users intention on buying books online. Certain factors will be investigated are demographic, features, convenience, web design, and security. This research used questionaires to obtain data from the respondents. After the data collected, SPSS software is used to process the data with using Chi-Square test. The result found that features, convenience, and security factors of online bookstores and level of education, income, and occupation of the Indonesian Internet Users influence the people intention on buying books online. In the other hand, web design of the online bookstores and the age of the Indonesian internet users have no influence on their intention on buying books online.

Factors influencing eating attitudes in secondary-school girls in ...

African Journals Online (AJOL)

Family, especially maternal, factors play a role in determining eating attitudes. Peer and media (television) factors are not significantly influential. The findings provide preliminary data on factors that influence eating attrtudes in a group at risk for the development of eating disorders. The findings have implications for the ...

Iranian nurses self-perception -- factors influencing nursing image.

Science.gov (United States)

Varaei, Shokoh; Vaismoradi, Mojtaba; Jasper, Melanie; Faghihzadeh, Soghrat

2012-05-01

The purpose of this study was to describe the perspectives of Iranian nurses regarding factors influencing nursing image. Nursing image is closely tied to the nurse's role and identity, influencing clinical performance, job satisfaction and quality of care. Images of nursing and nurses are closely linked to the cultural context in which nursing is practised, hence, this study explores how Iranian nurses perceive the factors that influence their own image. A descriptive study using a survey design was conducted with 220 baccalaureate qualified nurses working in four teaching hospitals in an urban area of Iran. A Nursing Image Questionnaire was used and analysed using descriptive and inferential statistics. In the domains of 'characteristics required for entry to work', 'social role characteristics of nursing' and 'prestige, economic and social status, and self image' the nurses had negative images. 'Reward' and 'opportunity for creativity and originality' were factors that least influenced choosing nursing as a career. The presence of a nurse in the family and working in the hospital had the greatest impact on the establishment of nurses' nursing image. Improving the nursing profession's prestige and social position as well as providing the opportunity for creativity and originality in nursing practice will change the self-image of Iranian nurses, facilitating effective and lasting changes in nursing's image. Nurse managers are well-placed to influence nurses' perceptions of nursing's image. Given the finding that thinking about leaving a job positively correlates with holding a negative nursing image, nurse managers need to consider how they can work effectively with their staff to enhance morale and nurses' experience of their job. © 2012 Blackwell Publishing Ltd.

Comprehensive approach to an assessment of removal consequences of low doses ionizing radiation influence in background of technic genius load (as an example of Pavlodar region of the Republic of Kazakstan)

International Nuclear Information System (INIS)

Slazhneva, T.I.; Korchevskij, A.A.; Orazgalieva, V.D.; Milyaev, A.D.

1996-01-01

The 'Prophylaxis' and 'Test site' comprehensive programmes are carried out for estimation of inhabitants health changes by both the Semipalatinsk test side influence and the significant technic genius pollution of environment called of industry development. It is defined, that Pavlodar region is object of radiation influence of Semipalatinsk test site. There are consequences of operation of industry enterprises (of power engineering, metallurgy, oil-chemistry) on large territory of the region. Aggravation of this region's population health was established during deepened study of sick rate with medical examination of more 12000 inhabitants and special onco-epidemical, cytological, medical genetic, immune researches. The character of chromosomal aberrations and oncological pathologies is testified about the essential influence of test site factors on health aggravation. System analysis shows, that low radiation doses are affected life quality and region population health

E-commerce factors influencing consumers‘ online shopping decision

OpenAIRE

Baubonienė, Živilė; Gulevičiūtė, Gintarė

2015-01-01

Purpose – The purpose of this paper is to look at the factors driving online shopping and to develop an understanding of the factors influencing the online shopping by the consumers. This is done by exploring the factors that encourage consumers to shop online through analysis of such advantages as security, fast delivery, comparable price, convenience, cheaper prices and a wider choice. At the same time, the research project reveals the factors that are discouraging for consumers and the ben...

Factors influencing job satisfaction and organizational commitment.

Science.gov (United States)

Watson, Liana M

2008-01-01

To assess the relationship between intrinsic and extrinsic motivational factors influencing job satisfaction and the perspective of frontline medical imaging staff in acute care health care facilities in the United States. The sample consisted of 359 registered radiologic technologists who were working as staff technologists in acute care health care facilities in the United States. The results of the study suggest that satisfaction with intrinsic and extrinsic motivators influences overall satisfaction with the work environment and job and commitment to the employer.

Positional interchanges influence the physical and technical match performance variables of elite soccer players.

Science.gov (United States)

Schuth, G; Carr, G; Barnes, C; Carling, C; Bradley, P S

2016-01-01

Positional variation in match performance is well established in elite soccer but no information exists on players switching positions. This study investigated the influence of elite players interchanging from one position to another on physical and technical match performance. Data were collected from multiple English Premier League (EPL) seasons using a computerised tracking system. After adhering to stringent inclusion criteria, players were examined across several interchanges: central-defender to fullback (CD-FB, n = 11, 312 observations), central-midfielder to wide-midfielder (CM-WM, n = 7, 171 observations), wide-midfielder to central-midfielder (WM-CM, n = 7, 197 observations) and attacker to wide-midfielder (AT-WM, n = 4, 81 observations). Players interchanging from CD-FB covered markedly more high-intensity running and sprinting distance (effect size [ES]: -1.56 and -1.26), lost more possessions but made more final third entries (ES: -1.23 and -1.55). Interchanging from CM-WM and WM-CM resulted in trivial to moderate differences in both physical (ES: -0.14-0.59 and -0.21-0.39) and technical performances (ES: -0.48-0.64 and -0.36-0.54). Players interchanging from AT-WM demonstrated a moderate difference in high-intensity running without possession (ES: -0.98) and moderate-to-large differences in the number of clearances, tackles and possessions won (ES: -0.77, -1.16 and -1.41). The data demonstrate that the physical and technical demands vary greatly from one interchange to another but utility players seem able to adapt to these positional switches.

What Factors Influence Knowledge Sharing in Organizations?

DEFF Research Database (Denmark)

Razmerita, Liana; Kirchner, Kathrin; Nielsen, Pia

2016-01-01

factors drive employees’ participation and what factors hamper their participation in enterprise social media. Design/methodology/approach: Based on a literature review, a unified research model is derived integrating demographic, individual, organizational and technological factors that influence......Purpose: Enterprise social media platforms provide new ways of sharing knowledge and communicating within organizations to benefit from the social capital and valuable knowledge that employees have. Drawing on social dilemma and self-determination theory, the aim of the study is to understand what...... knowledge sharing framework helps to understand what factors impact engagement on social media. Furthermore the article suggests different types of interventions to overcome the social dilemma of knowledge sharing. Originality/value: The study contributes to an understanding of factors leading...

Factors influencing laser cutting of wood

Science.gov (United States)

V.G. Barnekov; C.W. McMillin; H.A. Huber

1986-01-01

Factors influencing the ability of lasers to cut wood may be generally classified into these three areas: 1) characteristics of the laser beam; 2) equipment and processing variables; and 3) properties of the workpiece. Effects of beam power, mode, polarization, and stability are discussed as are aspects of optics, location of focal point, feed speed, gas-jet assist...

The Effect of Non-technical Factors in B2C E-Commerce

Science.gov (United States)

Sanayei, Ali; Shafe'Ei, Reza

As e-commerce grows across industries worldwide , business are building web sites for presence as well as for online business. It is more than transferring current business operations to a new medium. This situation requires explaining main models, changing infrastructures, and notice to customer needs as their vital rights. Whilst increasing numbers of firms have launched themselves on the Internet, they are trying to consideration of the strategic implications of developing, implementing or running a Web site. Global competition, laws, and customer preferences are among the issues being affected by e-commerce. In this study many factors that effect on e-commerce are considered these factors have no technical issue in nature. Companies related factors, customers' knowledge, customers' trust and customers' behavior are the main effective factors in development of B2C e-commerce. In this research we surveyed the mentioned aspects by offering questionnaire to experts of e-commerce for companies. The results show there is a meaningful relationship between perception, knowledge, trust and attitude of customers and the company's capabilities in the other side with B2C e-commerce development.

Review on Factors Influencing Physician Guideline Adherence in Cardiology.

Science.gov (United States)

Hoorn, C J G M; Crijns, H J G M; Dierick-van Daele, A T M; Dekker, L R C

2018-04-09

Cardiovascular disease is the most common cause of death in Western countries. Physician adherence to guidelines is often suboptimal, resulting in impaired patient outcome and prognosis. Multiple studies have been conducted to evaluate patterns and the influencing factors of patient adherence, but little is known about factors influencing physician guideline adherence. This review aims to identify factors influencing physician guideline adherence relevant to cardiology and to provide insights and suggestions for future improvement. Physician adherence was measured as adherence to standard local medical practice and applicable guidelines. Female gender and older age had a negative effect on physician guideline adherence. In addition, independent of the type of heart disease, physicians without cardiologic specialization were linked to physician noncompliance. Also, guideline adherence in primary care centers was at a lower level compared to secondary or tertiary care centers. The importance of guideline adherence increases as patients age, and complex diseases and comorbidity arise. Appropriate resources and interventions, taking important factors for nonadherence in account, are necessary to improve guideline adoption and adherence in every level of the chain. This in turn should improve patient outcome.

Factors influencing women\\'s decisions to purchase specific children ...

African Journals Online (AJOL)

Factors influencing women\\'s decisions to purchase specific children\\'s ... they had selected a children's multi-nutrient supplement with the intention of buying it. ... Price, performance and brand loyalty, affect and normative factors were most ...

Simulator training and non-technical factors improve laparoscopic performance among OBGYN trainees.

Science.gov (United States)

Ahlborg, Liv; Hedman, Leif; Nisell, Henry; Felländer-Tsai, Li; Enochsson, Lars

2013-10-01

To investigate how simulator training and non-technical factors affect laparoscopic performance among residents in obstetrics and gynecology. In this prospective study, trainees were randomized into three groups. The first group was allocated to proficiency-based training in the LapSimGyn(®) virtual reality simulator. The second group received additional structured mentorship during subsequent laparoscopies. The third group served as control group. At baseline an operation was performed and visuospatial ability, flow and self-efficacy were assessed. All groups subsequently performed three tubal occlusions. Self-efficacy and flow were assessed before and/or after each operation. Simulator training was conducted at the Center for Advanced Medical Simulation and Training, Karolinska University Hospital. Sterilizations were performed at each trainee's home clinic. Twenty-eight trainees/residents from 21 hospitals in Sweden were included. Visuospatial ability was tested by the Mental Rotation Test-A. Flow and self-efficacy were assessed by validated scales and questionnaires. Laparoscopic performance was measured as the duration of surgery. Visuospatial ability, self-efficacy and flow were correlated to the laparoscopic performance using Spearman's correlations. Differences between groups were analyzed by the Mann-Whitney U-test. No differences across groups were detected at baseline. Self-efficacy scores before and flow scores after the third operation were significantly higher in the trained groups. Duration of surgery was significantly shorter in the trained groups. Flow and self-efficacy correlate positively with laparoscopic performance. Simulator training and non-technical factors appear to improve the laparoscopic performance among trainees/residents in obstetrics and gynecology. © 2013 Nordic Federation of Societies of Obstetrics and Gynecology.

Influence analysis of design parameters of suspensions on the technical specifications of conveyor with suspended belt and distributed drive

Directory of Open Access Journals (Sweden)

Lagerev A.V.

2016-09-01

Full Text Available Using the basic design of the conveyor with suspended belt and distributed drive, a series of numerical calculations was performed. As a result, the influence of friction and mass-dimensional design parameters of suspensions on the main technical parameters of the conveyor was established. Recommendations on the choice of rational parameters were formulated.

Water Use Efficiency and Its Influencing Factors in China: Based on the Data Envelopment Analysis (DEA—Tobit Model

Directory of Open Access Journals (Sweden)

Shuqiao Wang

2018-06-01

Full Text Available Water resources are important and irreplaceable natural and economic resources. Achieving a balance between economic prosperity and protection of water resource environments is a major issue in China. This article develops a data envelopment analysis (DEA approach with undesirable outputs by using Seiford’s linear converting method to estimate water use efficiencies for 30 provinces in China, from 2008–2016,and then analyzes the influencing factors while using a DEA-Tobit model. The findings show that the overall water use efficiency of the measured Chinese provinces, when considering sewage emissions as the undesirable output, is 0.582. Thus, most regions still need improvement. Provinces with the highest water efficiency are located in economically developed Eastern China. The spatial pattern of water use efficiency in China is consistent with the general pattern of regional economic development. This study implies that factors like export dependence, technical progress, and educational value have a positive influence on water use efficiency. Further, while industrial structure has had a negative impact, government intervention has had little impact on water use efficiency. These research results will provide a scientific basis for the government to make plans for water resource development, and it may be helpful in improving regional sustainable development.

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

International Nuclear Information System (INIS)

Gupta, Nidhi; Fischer, Arnout R. H.; Lans, Ivo A. van der; Frewer, Lynn J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

Science.gov (United States)

Gupta, Nidhi; Fischer, Arnout R. H.; van der Lans, Ivo A.; Frewer, Lynn J.

2012-05-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Technical Efficiency of Beef Cattle Breeding Business in East Java Province

Directory of Open Access Journals (Sweden)

L. S. Kalangi

2014-08-01

Full Text Available The objectives of this research were to compare technical efficiency of beef cattle business operating in lowland and upland areas of East Java and to identify and analyze factors affecting the technical efficiency as well as inefficiency of that business. A survey was conducted to 89 farmers in the lowland area of Probolinggo District and 97 farmers in the upland areas of Malang Districts during the period of February-March 2013. Results of stochastic frontier production function with MLE method showed that the average technical efficiency in lowland area was higher (80% compared to that in upland area (64%. The results indicated that beef cattle production was highly significant and positively influenced by total of grasses and forages, rice straw, feed supplements, stock of cattle, labor time allocation and service per conception. However, location of the business, whether in lowland and upland areas was a significant factor that could increase the efficiency. Some factors that could significantly reduce the technical inefficiency of beef cattle business were: labor force in family, education level, proportion of beef cattle income to total household income, age of cattle sold, cattle health examination, ownership status of the cattle, and gender. Therefore, (1 the existing farmers group should be improved their role to facilitate trading of cattle feed, and (2 the government should facilitate the farmers in the provision of funding tu buy beef cattle with a subsidized interest rate, so the farmers will be more enthusiast in taking care of their cattle, thus could improve their production efficiency.

Emergency Department Crowding: Factors Influencing Flow

Directory of Open Access Journals (Sweden)

Arkun, Alp

2010-02-01

Full Text Available Background: The objective of this study was to evaluate those factors, both intrinsic and extrinsic to the emergency department (ED that influence two specific components of throughput: “door-to-doctor” time and dwell time.Methods: We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday during a three-month period. Variables measured included daily ED volume, patient acuity, staffing, ED occupancy, daily admissions, ED boarder volume, hospital volume, and intensive care unit volume. Both log-rank tests and time-to-wait (survival proportional-hazard regression models were fitted to determine which variables were most significant in predicting “door-to-doctor” and dwell times, with full account of the censoring for some patients.Results: We captured 1,543 patients during our study period, representing 27% of total daily volume. The ED operated at an average of 85% capacity (61-102% with an average of 27% boarding. Median “door-to-doctor” time was 1.8 hours, with the biggest influence being triage category, day of the week, and ED occupancy. Median dwell time was 5.5 hours with similar variable influences.Conclusion: The largest contributors to decreased patient flow through the ED at our institution were triage category, ED occupancy, and day of the week. Although the statistically significant factors influencing patient throughput at our institution involve problems with inflow, an increase in ED occupancy could be due to substantial outflow obstruction and may indicate the necessity for increased capacity both within the ED and hospital. [West J Emerg Med. 2010; 11(1:10-15

Impact of Personal Characteristics and Technical Factors on Quantification of Sodium 18F-Fluoride Uptake in Human Arteries

DEFF Research Database (Denmark)

Blomberg, Björn Alexander; Thomassen, Anders; de Jong, Pim A

2015-01-01

Sodium (18)F-fluoride ((18)F-NaF) PET/CT imaging is a promising imaging technique for assessment of atherosclerosis, but is hampered by a lack of validated quantification protocols. Both personal characteristics and technical factors can affect quantification of arterial (18)F-NaF uptake....... This study investigated if blood activity, renal function, injected dose, circulating time, and PET/CT system affect quantification of arterial (18)F-NaF uptake. METHODS: Eighty-nine healthy subjects were prospectively examined by (18)F-NaF PET/CT imaging. Arterial (18)F-NaF uptake was quantified...... assessed the effect of personal characteristics and technical factors on quantification of arterial (18)F-NaF uptake. RESULTS: NaFmax and TBRmax/mean were dependent on blood activity (β = .34 to .44, P

Diagnostics of the Factors Influencing the Export Activity of an Enterprise

Directory of Open Access Journals (Sweden)

Skrynkovskyy Ruslan M.

2017-09-01

Full Text Available The modern practice of doing business proves that a successful entrance of any enterprise to external (international markets depends on the level of its readiness for carrying out foreign economic activity. Under such circumstances, the process of targeted analysis and assessment of factors influencing the export activity of the enterprise is relevant, expedient and important. The aim of the article is the formation and development of theoretical and methodological bases for diagnosing factors influencing the export activity of an enterprise on the basis of theory and practice in the field of management and administration. It is found that the diagnostics should be understood as the process of identification, analysis and evaluation of influence (functional, dysfunctional of the factors (circumstances, conditions, etc. on the export activity of an enterprise in order to identify and solve problems (current, possible ones in the sphere of supply and implementation of specific actions (steps related to its entrance to external (international markets. It is determined that the key business indicators of the system for diagnosing the factors influencing the export activity of an enterprise are indicators reflecting the influence of the main factors on its export activity: level of fulfillment of obligations in terms of cost; level of conclusion of “expensive contracts”; share of renewed business contracts in the total number of contracts; level of satisfaction of claims; level of delivery variability. The prospect for further research in this scientific direction is developing a system of partial diagnostic goals of the integrated system of goals for conducting economic diagnostics of enterprises taking into account the diagnostics of factors influencing the export activity of an enterprise as a partial diagnostic goal.

Factors Influencing Medical Students' Choice of Specialty

OpenAIRE

Chang, Pei-Yeh; Hung, Chih-Young; Wang, Kuei-lng; Huang, Yuan-Huei; Chang, King-Jen

2006-01-01

Medical school graduates are the source of a country's physicians. Determining how the graduates of these schools select their areas of specialization is the key to achieving a balanced distribution of doctors among all specialties. The purposes of this study were to determine the factors that influence medical students' choice of medical specialty, and to derive the relative weight of each factor. Methods: We constructed a two-tiered analytic hierarchy process (AHP) model which was repres...

Factors influencing woodlands of southwestern North Dakota

Science.gov (United States)

Michele M. Girard; Harold Goetz; Ardell J. Bjugstad

1987-01-01

Literature pertaining to woodlands of southwestern North Dakota is reviewed. Woodland species composition and distribution, and factors influencing woodland ecosystems such as climate, logging, fire, and grazing are described. Potential management and improvement techniques using vegetation and livestock manipulation have been suggested.

Factors that influence advertising design ideation | Usman ...

African Journals Online (AJOL)

Factors that influence advertising design ideation. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... inevitably, more than ever before, on advertisement to take products to the doorsteps of potential consumers. Consequently, local and global corporations employ all manner of advertising media to achieve their end.

ICT Interventions for Girls: Factors Influencing ICT Career Intentions

Directory of Open Access Journals (Sweden)

Elena Gorbacheva

2014-11-01

Full Text Available Intervention programs aimed at promoting study and work opportunities in the Information and Communications Technology (ICT field to schoolgirls have been encouraged to combat a decline in the interest among girls to study ICT at school. The goal of our study is to investigate the influence of such interventions on schoolgirls’ intentions to choose a career in the ICT field by analysing comprehensive survey data (n = 3577, collected during four interventions in Australia, using the Partial Least Squares method. Our study is also aimed at identifying other factors influencing ICT career intentions. We found that the attitude towards interventions has an indirect influence on ICT career intentions by affecting interest in ICT. Our results also challenge several existing theoretical studies by showing that factors that had previously been suggested as influencers were found to have little or no impact in this study, these being same-sex education and computer usage.

Experimental verification of different parameters influencing the fatigue S/N-curve

International Nuclear Information System (INIS)

Roos, E.; Maile, K.; Herter, K.-H.; Schuler, X.

2005-01-01

For the construction, design and operation of nuclear components the appropriate technical codes and standards provide detailed stress analysis procedures, material data and a design philosophy which guarantees a reliable behavior throughout the specified lifetime. Especially for cyclic stress evaluation the different codes and standards provide different fatigue analyses procedures to be performed considering the various (specified or measured) loading histories which are of mechanical and/or thermal origin and the geometric complexities of the components. In order to fully understand the background of the fatigue analysis included in the codes and standards as well as of the fatigue design curves used as a limiting criteria (to determine the fatigue life usage factor), it is important to understand the history, background as well as the methodologies which are important for the design engineers to get reliable results. The design rules according to the technical codes and standards provide for explicit consideration of cyclic operation, using design fatigue curves of allowable alternating loads (allowable stress or strain amplitudes) vs. number of loading cycles (S/N-curves), specific rules for assessing the cumulative fatigue damage (cumulative fatigue life usage factor) caused by different specified or monitored load cycles. The influence of different factors like welds, environment, surface finish, temperature, mean stress and size must be taken into consideration. In the paper parameters influencing the S/N-curves used within a fatigue analysis, like different type of material, the surface finish, the temperature, the difference between unwelded and welded areas, the strain rate as well as the influences of notches are verified on the basis of experimental results obtained by specimens testing in the LCF regime for high strain amplitudes. Thus safety margins relevant for the assessment of fatigue life depending on the different influencing parameters are

Factors influencing the intention to watch online video advertising.

Science.gov (United States)

Lee, Joonghwa; Lee, Mira

2011-10-01

This study examines the factors influencing consumer intention to watch online video ads, by applying the theory of reasoned action. The attitude toward watching online video ads, the subjective norm, and prior frequency of watching online video ads positively influence the intention to watch online video ads. Further, beliefs held about entertainment and information outcomes from watching online video ads and subjective norm influence attitude toward watching these ads.

An Analysis of Factors Affecting Community College Students' Expectations on E-Learning

Science.gov (United States)

Kilic-Cakmak, Ebru; Karatas, Sercin; Ocak, Mehmet Akif

2009-01-01

There are many factors that affect the e-learning process. Instructor, assessment and evaluation, communication, and technical support are among the leading factors. It is obvious that these factors influence the effectiveness of e-learning and may be related to different expectations of e-learners. Therefore, this study focuses on examining the…

Husbandry factors and health conditions influencing the productivity of French rabbit farms

Directory of Open Access Journals (Sweden)

A. Huneau-Salaün

2015-03-01

Full Text Available In 2009 productivity data from 95 kindling to finishing rabbit farms in France were analysed to identify rearing factors and health conditions that influenced their productivity. Farm productivity, expressed on a yearly basis, was described with 4 productivity indices: doe fertility and prolificacy, viability of young rabbits in the nest and mortality during the fattening period. The productivity data were obtained with the technical support of the farm and expressed in a standardised way. The average numerical productivity observed in the sample of farms was 50.9 rabbits produced per doe and per year (CI95% [49.6-52.2]. The husbandry management and health conditions were described based on a questionnaire filled out during an interview with the farmer and a farm visit. Explanatory data were organised into meaningful blocks relative to biosecurity measures, del using a Partiamaternity management, the sanitary context and the farm structure. The relationship between the 4 thematic blocks and the productivity indices was studied in a single mol Least Squares (PLS regression model. Fertility (81.0%, CI95% [80.0-82.0] and viability of young at nest (85.1%, CI95% [85.0-85.3] and mortality rate during fattening: 7.2%, CI95% [6.4-7.9] were significantly associated with common factors relative to maternity management and the health context whereas prolificacy (9.7 live kits per parturition, CI95% [9.5-9.9] was mostly influenced by a specific set of variables pertaining to those 2 blocks. Farm structure and biosecurity measures had a limited impact on fertility and on kit viability before weaning. The health conditions of the doe herd and the fattening rabbits were found to be significantly associated with several productivity indexes, but their impacts on productivity were as high as the impact of the other blocks. Genetic strain of the females, doe replacement strategy and nursing and weaning practices appeared to significantly influence reproductive

Technical issues related to NUREG 0800, Chapter 18: Human Factors Engineering/Standard Review Plan

International Nuclear Information System (INIS)

Savage, J.W.

1982-01-01

The revision of Chapter 18 of NUREG 0800, Human Factors Engineering Standard Review Plan (SRP) will be based on SECY 82-111 and guidance contained in NUREG 0700, NUREG 0801 and NUREG 0835, plus other references. In conducting field reviews of control rooms, the NRC has identified technical issues which can be used to enhance the development of the revised version of NUREG 0800, and to establish priorities among the list of possible Branch Technical Positions (BTP) in NUREG 0800, Rev. 0, Table 18.0-2. This report is a compilation of comments and suggestions from the people who used NUREG 0700 in the Control Room field reviews. This information was used to establish possible BTP topic priorities so that the most important BTPs could be issued first. The comments and suggestions are included for HFEB review in conjunction with the table of priorities

Factors Influencing Professional Help-Seeking for Suicidality.

Science.gov (United States)

Han, Jin; Batterham, Philip J; Calear, Alison L; Randall, Rebecca

2018-05-01

Evidence suggests that the majority of people with suicidality do not seek help. Little systematic evaluation of factors influencing professional help-seeking has been done. To systematically evaluate the factors that influence professional help-seeking for suicidality. Published quantitative and qualitative studies in Medline and PsycInfo databases were reviewed following PRISMA. In all, 55 relevant studies were identified. Of these, 15 studies examined professional help-seeking intentions for perceived suicidal ideation, among people with or without suicidality; 21 studies examined professional help-seeking behavior among people with suicidality; and 19 studies examined suicidal decedents' health services use. Several potential important barriers were identified including high self-reliance, lack of perceived need for treatment, and stigmatizing attitudes toward suicide, toward mental health issues, and toward seeking professional treatment. The presence of suicidality and mental health issues was found to generally decrease help-seeking intentions for perceived suicidal ideation while facilitating actual service use. Social support and informal support from family and friends also played an important role in professional help-seeking. Although the majority of the included studies were of sound quality, some of the factors identified in the review were assessed in relatively few studies, and most of the included studies were conducted in industrialized countries. Further quantitative and qualitative studies examining the potential important factors in broader community samples, especially in developing countries, are needed.

Factors influencing condom use among Nigerian undergraduates: A ...

African Journals Online (AJOL)

Factors influencing condom use among Nigerian undergraduates: A mixed method study. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... group discussions) and quantitative (cross-sectional survey) methods were utilised for this study.

Factors influencing insulin secretion from encapsulated islets

NARCIS (Netherlands)

de Haan, BJ; Faas, MM; de Vos, P

2003-01-01

Adequate regulation of glucose levels by a microencapsulated pancreatic islet graft requires a minute-to-minute regulation of blood glucose. To design such a transplant, it is mandatory to have sufficient insight in factors influencing the kinetics of insulin secretion by encapsulated islets. The

A real-time assessment of factors influencing medication events.

Science.gov (United States)

Dollarhide, Adrian W; Rutledge, Thomas; Weinger, Matthew B; Fisher, Erin Stucky; Jain, Sonia; Wolfson, Tanya; Dresselhaus, Timothy R

2014-01-01

Reducing medical error is critical to improving the safety and quality of healthcare. Physician stress, fatigue, and excessive workload are performance-shaping factors (PSFs) that may influence medical events (actual administration errors and near misses), but direct relationships between these factors and patient safety have not been clearly defined. This study assessed the real-time influence of emotional stress, workload, and sleep deprivation on self-reported medication events by physicians in academic hospitals. During an 18-month study period, 185 physician participants working at four university-affiliated teaching hospitals reported medication events using a confidential reporting application on handheld computers. Emotional stress scores, perceived workload, patient case volume, clinical experience, total sleep, and demographic variables were also captured via the handheld computers. Medication event reports (n = 11) were then correlated with these demographic and PSFs. Medication events were associated with 36.1% higher perceived workload (p sleep (p = .10). These results confirm the effect of factors influencing medication events, and support attention to both provider and hospital environmental characteristics for improving patient safety. © 2013 National Association for Healthcare Quality.

Factors influencing the vulnerability of women to the risk of HIV ...

African Journals Online (AJOL)

Factors influencing the vulnerability of women to the risk of HIV-infection in rural villages in North West Province, South Africa. ... Gender and Behaviour ... This particular study found that there are a number of personal, proximal and distal factors that influence the vulnerability of women to HIV-infection in rural villages in ...

Factors Influencing the Yemeni Customers’ Intention to Adopt Takaful Products

Directory of Open Access Journals (Sweden)

Abdelghani Echchabi

2015-01-01

Full Text Available The purpose of this study is to examine the Yemeni customers’ intention to adopt Takaful products, and to explore the potential factors that influence their decision. This study applies SEM and one sample t-test to analyse the collected data. The results indicate that among the factors included in this study, only compatibility positively and significantly affects the adoption intention. This is the first study that addresses the adoption of Takaful products in Yemen and the factors that influence it. Furthermore, this study extends the Innovations Diffusion Theory (IDT by applying it to a different setting.

An empirical survey on factors influencing on packaging dairy products

Directory of Open Access Journals (Sweden)

Naser Azad

2013-07-01

Full Text Available Packaging plays an essential role on supplying different materials such as dairy products. The first thing people may look into when they purchase dairy products such as milk, cheese, etc. is associated with the packaging characteristics. This paper attempts to find important factors influencing on packaging dairy products. The study uses factor analysis to detect important factors based on a questionnaire consists of 28 questions in Likert scale, which is distributed among 200 regular employees of Pegah dairy producer. Cronbach alpha, Kaiser-Meyer-Olkin Measure of Sampling adequacy and Bartlett's test of Sphericity approximation Chi-Square are 0.81, 0.679 and 844.475, respectively and they are within acceptable limit. The study has determined five factors including infrastructure, awareness, design and communication as important factors influencing consumers.

Factors influencing selection of a HTR for a developing country

International Nuclear Information System (INIS)

Karim, C.S.

1989-01-01

Consumption of commercial energy and electricity in Bangladesh has to grow rapidly in order to attain socio-economic development of the country. Nuclear power is considered to be an appropriate proposition due to the inadequacy of indigenous primary energy resources. A technical, economic and financial feasibility study of a 300-500 MWe nuclear power plant is underway now. Responses from different suppliers in SMPR range were enumerated jointly by the Consultants and BAEC under the feasibility study. Criteria for selection of technology and the factor influencing the selection of Modular HTR for Bangladesh are described in the paper. Some indicative results of cost economic calculations are included to help form an idea about various limiting conditions, under which a SMPR with the selected technology could become competitive with the other conventional alternatives. Problems in decision making associated with the uncertainties in estimating plant and fuel cycle costs are enumerated. The implications of not having a reference plant vis-a-vis the advantageous safety features are described to show how these aspects can influence the selection of a new technology like HTR for a developing country. Financing is identifiable as the major problem in implementing a nuclear power project in a developing country like Bangladesh. The entire scope of supplies and services may be broken down into components, so that the burden of financing could be shared by more than one exporting country. Some indicative ideas about the packaging of supplies and services are presented in the paper in order to identify different types of financing sources that could be explored for implementation of the project. Some salient features of the effect of joint-venture on the project financing and implementation are described in the paper. (author). 3 refs, 1 fig

Women’s Participation in Scientific and Technical Field in Malaysia

Directory of Open Access Journals (Sweden)

Nuraihan Mat Daud

1999-12-01

Full Text Available The scientific and technical fields are generally dominated by men. Women tend to shy away from using technical devices and from trying to understand the principles behind their operation. One of the major reasons for their seemingly lack of interest is the lack of encouragement from their family and society. This paper discusses the steps taken by a country, namely, Malaysia, to encourage its female population to venture into this area. Policies were created by the government for this purpose. Great emphasis is given on education, which is one of the important factors influencing one's choice of vocation. In its process of restructuring the society, the government has effectively increased the involvement of women particularly the Muslims in the professional and technical fields as the vast opportunities are provided for them to pursue their studies in this area. There is a marked increase in the number of female student intake in technical and vocational institutions. There is also an increase in the number of females in related fields such as accountancy, engineering, architecture and medicine. The ratio of male to female involvement has however not changed much when the figures are analysed.

Pakistani medical students' specialty preference and the influencing factors.

Science.gov (United States)

Rehman, Anis; Rehman, Tariq; Shaikh, Muhammad Ateeb; Yasmin, Haleema; Asif, Ammara; Kafil, Hina

2011-07-01

To elucidate the specialty preferences of Pakistani medical students and the factors which influence medical students to make the decision regarding which specialty to pursue. Both basic sciences and clinical students from four medical colleges of Pakistan, i.e., Dow Medical College, Sindh Medical College, Liaquat National Medical College and Muhammad Medical College, were included in the cross-sectional survey during the period of July 2008 to Jan' 2009. After ethical acceptance, data was collected using convenient sampling technique. The questionnaire covered the following demographic details: 13 common specialties and 15 influencing factors. Questionnaires included in the analysis were 771. Most students gave preference to surgery and its associated sub-specialties (50.3%) followed by internal medicine (26.8%), paediatrics (23.2%), dermatology (16.7%), gynaecology and obstetrics (16.7%), psychiatry (13.1%), radiology (10.8%), ENT (8.8%), anaesthesiology (8.7%), administrative medicine (8.6%), orthopaedics (8.2%), ophthalmology (7.5%), and laboratory medicine (6.1%). The highly considered factors (regarding specialties) chosen by 70% of the medical students were: applicable to respective personalities of the individuals, prestige and respect, international opportunities, and time commitment. Surgical-skills, job availability, financial rating, academic performance, and a role model were moderately influencing factors. Hospital environment, parents, general practice, peer-pressure and personal health were the least influential. This trend suggests competition in surgery and its sub-specialties along with internal medicine, paediatrics, dermatology, gynaecology and obstetrics. Specialty suited to personality, time commitment, prestige/respect and international opportunity, influenced more than 70% of the students.

Factors influencing training transfer in nursing profession: a qualitative study.

Science.gov (United States)

Ma, Fang; Bai, Yangjing; Bai, Yangjuan; Ma, Weiguang; Yang, Xiangyu; Li, Jiping

2018-03-20

There is a growing recognition that training is not translated into performance and the 'transfer problem' exists in organization training today. Although factors contributing to training transfer have been identified in business and industry, the factors influencing training transfer in nursing profession remain less clear. A qualitative descriptive study was undertaken in two tertiary referral hospitals in China from February 2013 to September 2013. Purposeful sampling of 24 nursing staffs were interviewed about the factors influencing training transfer. Seven themes evolved from the analysis, categorized in 4 main domains, which described the factors influencing training transfer in nursing profession in trainee characteristics, training design, work environment and profession domain. The trainee characteristics domain included attitude and ability. The training design domain included training content and instruction method. The work environment domain included supports as facilitators and opposition as hindrance. The theme pertaining to the profession domain was professional development. Health care managers need to understand the factors influencing training transfer for maximizing the benefits of training. The right beliefs and values about training, the rigorous employee selection for training, the relevance of training content, training instructions facilitating learning and transfer, supports from peer, supervisors and the organization, organizational culture such as change, sharing, learning and support, and professional development are key to successful training transfer. Furthermore, managers should be aware of the opposition from co-workers and find ways to prevent it.

Factors influencing antibiotic prescribing in long-term care facilities: a qualitative in-depth study.

Science.gov (United States)

van Buul, Laura W; van der Steen, Jenny T; Doncker, Sarah M M M; Achterberg, Wilco P; Schellevis, François G; Veenhuizen, Ruth B; Hertogh, Cees M P M

2014-12-16

Insight into factors that influence antibiotic prescribing is crucial when developing interventions aimed at a more rational use of antibiotics. We examined factors that influence antibiotic prescribing in long-term care facilities, and present a conceptual model that integrates these factors. Semi-structured qualitative interviews were conducted with physicians (n = 13) and nursing staff (n = 13) in five nursing homes and two residential care homes in the central-west region of the Netherlands. An iterative analysis was applied to interviews with physicians to identify and categorize factors that influence antibiotic prescribing, and to integrate these into a conceptual model. This conceptual model was triangulated with the perspectives of nursing staff. The analysis resulted in the identification of six categories of factors that can influence the antibiotic prescribing decision: the clinical situation, advance care plans, utilization of diagnostic resources, physicians' perceived risks, influence of others, and influence of the environment. Each category comprises several factors that may influence the decision to prescribe or not prescribe antibiotics directly (e.g. pressure of patients' family leading to antibiotic prescribing) or indirectly via influence on other factors (e.g. unfamiliarity with patients resulting in a higher physician perceived risk of non-treatment, in turn resulting in a higher tendency to prescribe antibiotics). Our interview study shows that several non-rational factors may affect antibiotic prescribing decision making in long-term care facilities, suggesting opportunities to reduce inappropriate antibiotic use. We developed a conceptual model that integrates the identified categories of influencing factors and shows the relationships between those categories. This model may be used as a practical tool in long-term care facilities to identify local factors potentially leading to inappropriate prescribing, and to subsequently

Overview of NRC's human factors regulatory research program

International Nuclear Information System (INIS)

Coffman, F.D. Jr.

1989-01-01

The human factors research program is divided into distinct and interrelated program activities: (1) Personnel Performance measurement, (2) Personnel Subsystem, (3) Human-System Interface, (4) Organization and Management, and (5) a group of Reliability Assessment activities. The purpose of the Personnel Performance Measurement activity is to improve the Agency's understanding of the factors influencing personnel performance and the effects on the safety of nuclear operations and maintenance by developing improvements to methods for collecting and managing personnel performance data. Personnel Subsystem research will broaden the understanding of such factors as staffing, qualifications, and training that influence human performance in the nuclear system and will develop the technical basis for regulatory guidance to reduce any adverse impact of these influences on nuclear safety. Research in the Human-System Interface activity will provide the technical basis for ensuring that the interface between the system and the human user supports safe operations and maintenance. Organization and Management research will result in the development of tools for evaluating organization and management issues within the nuclear industry. And finally, the Reliability Assessment group of activities includes multidisciplinary research that will integrate human and hardware considerations for evaluating reliability and risk in NRC licensing, inspection, and regulatory decisions

Factors influencing the adoption of mobile financial services in the ...

African Journals Online (AJOL)

Factors influencing the adoption of mobile financial services in the unbanked population. ... Inkanyiso: Journal of Humanities and Social Sciences ... the influences of the adoption behaviour at different level of market maturity and points of time.

Genetic and environmental factors influencing the Placental Growth Factor (PGF variation in two populations.

Directory of Open Access Journals (Sweden)

Rossella Sorice

Full Text Available Placental Growth Factor (PGF is a key molecule in angiogenesis. Several studies have revealed an important role of PGF primarily in pathological conditions (e.g.: ischaemia, tumour formation, cardiovascular diseases and inflammatory processes suggesting its use as a potential therapeutic agent. However, to date, no information is available regarding the genetics of PGF variability. Furthermore, even though the effect of environmental factors (e.g.: cigarette smoking on angiogenesis has been explored, no data on the influence of these factors on PGF levels have been reported so far. Here we have first investigated PGF variability in two cohorts focusing on non-genetic risk factors: a study sample from two isolated villages in the Cilento region, South Italy (N=871 and a replication sample from the general Danish population (N=1,812. A significant difference in PGF mean levels was found between the two cohorts. However, in both samples, we observed a strong correlation of PGF levels with ageing and sex, men displaying PGF levels significantly higher than women. Interestingly, smoking was also found to influence the trait in the two populations, although differently. We have then focused on genetic risk factors. The association between five single nucleotide polymorphisms (SNPs located in the PGF gene and the plasma levels of the protein was investigated. Two polymorphisms (rs11850328 and rs2268614 were associated with the PGF plasma levels in the Cilento sample and these associations were strongly replicated in the Danish sample. These results, for the first time, support the hypothesis of the presence of genetic and environmental factors influencing PGF plasma variability.

471 socio-economic factors influencing agricultural radio

African Journals Online (AJOL)

Osondu

The study examined socio economic factors influencing agricultural radio programme FILIN. MAINOMA in ... statistics such as, Pearson Product Moment Correlation Coefficient (PPMC) and Chi-Square analysis. (χ. 2). .... of fish farmers association while one third. (22.22%) ... problems of language barrier and 6.00% of the.

RUSSIAN-VIETNAMESE MILITARY-TECHNICAL COOPERATION: CHALLENGES AND OPPORTUNITIES FOR RUSSIA

Directory of Open Access Journals (Sweden)

Н В Федоров

2017-12-01

Full Text Available Vietnam plays important role in Russian policy in the Asia-Pacific region. Military-technical cooperation holds special position in Russian-Vietnamese relations. The aim of the article is the detection of the special features of military-technical cooperation between Russia and Vietnam, and also challenges and opportunities it provides for Russian policy. After the collapse of the USSR defense interaction between Russia and Vietnam was determined by commercial foundations. Vietnam needed new Russian weapons to protect its interests, first of all, in the South China Sea. For Moscow military-technical cooperation with Vietnam got economic significance. But later there was a rise of political dimension of cooperation in this sphere, influenced by some external factors. The period of the 2000-2010s was marked by growth of arms sales from Russia to Vietnam. It was mostly caused by the escalation of the South China Sea conflict, for which US-Chinese contradictions began to play an increasing role. Military-technical coopera-tion with Vietnam influenced some aspects of policy of Russia in the region. There was an increase of indi-rect involvement of Russia into the South China Sea conflict. Russian arms sales for Vietnam became one of problems in Russian-Chinese relations. But Russia and China could cope with these disputes, partly because of enlargement of their interaction in international relations, including the demonstration of similar position for some aspects of the South China Sea conflict. In the framework of development of defense cooperation with Vietnam, Russia could get special conditions of access to facilities of Cam Ranh Bay that strengthened its strategic positions in the region. Russian cooperation with Hanoi in military-technical field and general reinforcement of Russian positions in Vietnam might be also a reason for contradictions with the US.

Factors that influence the acceptance of telemetry by emergency medical technicians in ambulances: an application of the extended technology acceptance model.

Science.gov (United States)

Hwang, Ji Young; Kim, Ki Young; Lee, Kang Hyun

2014-12-01

The aim of the study was to verify the effects of patient factors perceived by emergency medical technicians (EMTs) as well as their social and organizational factors on prehospital telemetry use intention based on the technology use intention and elaboration likelihood models. This is a retrospective empirical study. Questionnaires were developed on the basis of clinical factors of 72,907 patients assessed by prehospital telemetry from January 1, 2009 to April 30, 2012 by reviewing their prehospital medical care records and in-hospital medical records. Questionnaires regarding the social and organizational factors of EMTs were created on the basis of a literature review. To verify which factors affect the utilization of telemetry, we developed a partial least-squares route model on the basis of each characteristic. In total, 136 EMTs who had experience in using prehospital telemetry were surveyed from April 1 to April 7, 2013. Reliability, validity, hypotheses, and the model goodness of fit of the study tools were tested. The clinical factors of the patients (path coefficient=-0.12; t=2.38), subjective norm (path coefficient=0.18; t=2.63), and job fit (path coefficient=0.45; t=5.29) positively affected the perceived usefulness (p<0.010). Meanwhile, the clinical factors of the patients (path coefficients=-0.19; t=4.46), subjective norm (path coefficient=0.08; t=1.97), loyalty incentives (path coefficient=-0.17; t=3.83), job fit (path coefficient=-0.32; t=7.06), organizational facilitations (path coefficient=0.08; t=1.99), and technical factors (i.e., usefulness and ease of use) positively affected attitudes (path coefficient=0.10, 0.58; t=2.62, 5.81; p<0.010). Attitudes and perceived usefulness significantly positively affected use intention. Factors that influence the use of telemetry by EMTs in ambulances included patients' clinical factors, as well as complex organizational and environmental factors surrounding the EMTs' occupational environments. This suggests

Investigating different factors influencing on brand equity

Directory of Open Access Journals (Sweden)

Afsane Zamanimoghadam

2014-07-01

Full Text Available The purpose of this paper is to determine and prioritize factors influencing on brand equity in consumer’s point of view for a case study of Samsung appliance consumers in city of Tehran, Iran. The study investigates the effects of four factors in terms of the customer's perspective, price, advertisement, family and brand image, by dimensions of brand equity, perceived quality, brand awareness, brand association, brand loyalty, on brand equity. The research method is based on a descriptive-survey research. The questionnaire includes Samsung consumers in city of Tehran, Iran. To test the hypotheses, SPSS and LISREL software packages are used. For data analysis, descriptive statistics and inferential statistical tests including structural equation modeling and path analysis are used. The results of the survey have indicated that family and brand image influence positively on brand equity but the effects of advertisement and price on brand equity were not confirmed.

Factors that influence women's dispositions toward science

Science.gov (United States)

Atria, Catherine Graczyk

Females have been underrepresented in the study of science and science careers for decades although advancements have been made in closing this gender gap, the gap persists particularly in the physical sciences. Variables which influence a woman's desire to pursue and maintain a science course of study and career must be discovered. The United States lags behind other industrialized countries in the fields of science, math, and engineering. Females comprise an estimated half of the population; their potential contributions cannot be ignored or overlooked. This retrospective research study explores the personal experiences of ten women enrolled in science majors, with science related career plans. The goal of this study is to describe the factors that influence the participants' interest in science. The findings, the effect of science coursework, science teachers' personality and manner, other influential educational personnel, role models and mentors, external influences exclusive of school, parental influence, locus of control and positive attitudes toward science confirm what other researchers have found.

Analysis on influencing factors of clinical teachers’ job satisfaction by structural equation model

Directory of Open Access Journals (Sweden)

Haiyi Jia

2017-02-01

Full Text Available [Research objective] Analyze the influencing factors of clinical teachers’ job satisfaction. [Research method] The ERG theory was used as the framework to design the questionnaires. Data were analyzed by structural equation model for investigating the influencing factors. [Research result] The modified model shows that factors of existence needs and growth needs have direct influence on the job satisfaction of clinical teachers, the influence coefficients are 0.540 and 0.380. The three influencing factors have positive effects on each other, and the correlation coefficients are 0.620, 0.400 and 0.330 respectively. [Research conclusion] Relevant departments should take active measures to improve job satisfaction of clinical teachers from two aspects: existence needs and growth needs, and to improve their work enthusiasm and teaching quality.

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

Energy Technology Data Exchange (ETDEWEB)

Gupta, Nidhi, E-mail: nidhi.gupta@wur.nl; Fischer, Arnout R. H., E-mail: arnout.fischer@wur.nl; Lans, Ivo A. van der, E-mail: Ivo.vanderLans@wur.nl [Wageningen University, Marketing and Consumer Behaviour Group (Netherlands); Frewer, Lynn J., E-mail: lynn.frewer@newcastle.ac.uk [Newcastle University, School of Agriculture, Food and Rural Development (United Kingdom)

2012-05-15

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Factors influencing post-traumatic stress in Korean forensic science investigators.

Science.gov (United States)

Yoo, Yang-Sook; Cho, Ok-Hee; Cha, Kyeong-Sook; Boo, Yun-Jeong

2013-09-01

The aim of this study was to understand factors that influence post-traumatic stress (PTS) in Korean forensic science investigators. A total of 111 forensic science investigators were recruited in Korea. PTS was measured using the tool modified by Choi (2001) from the original developed by Foa, Riggs, Dancu, and Rothbaum (1993) based on DSM-IV. Factors influencing PTS included demographic and job-related characteristics, emotional intelligence, and death anxiety. PTS scores were positively correlated with personality type, fatigue from work, and death anxiety. PTS scores were negatively correlated with length of career as a forensic science investigator and emotional intelligence. The factors that had the greatest influence on PTS were death anxiety, years spent as a forensic science investigator, personality type, emotional intelligence, fatigue, and homicide experience. The explanatory power of these six factors was 44.0%. Therefore, it is necessary to regularly evaluate the mental health of those who are vulnerable to PTS. Based on these results, various interventions could be implemented for promoting overall health of the forensic science investigators. Copyright © 2013. Published by Elsevier B.V.

Clarification of the technic of intrinsic factor radioimmunoassay for the cat and the rat

International Nuclear Information System (INIS)

Perrin, M.O.; Nicolas, J.P.; Dubrasquet, M.

1983-01-01

Cats and rats secrete very small quantities of gastric juice (GJ). In order to measure the Intrinsic Factor (IF) in GJ of animals certain modifications are necessary. It is very important to select with great care pernicious anemia sera which will be used to cross react with the animals' IF to determine their IF level by radioimmunoassay. The technic described here enables the dosage of low quantities of IF with a 7 per cent coefficient of variation [fr

Factors Potentially Influencing Student Acceptance of Biological Evolution

Science.gov (United States)

Wiles, Jason R.

This investigation explored scientific, religious, and otherwise nonscientific factors that may influence student acceptance of biological evolution and related concepts, how students perceived these factors to have influenced their levels of acceptance of evolution and changes therein, and what patterns arose among students' articulations of how their levels of acceptance of evolution may have changed. This exploration also measured the extent to which students' levels of acceptance changed following a treatment designed to address factors identified as potentially affecting student acceptance of evolution. Acceptance of evolution was measured using the MATE instrument (Rutledge and Warden, 1999; Rutledge and Sadler, 2007) among participants enrolled in a secondary-level academic program during the summer prior to their final year of high school and as they transitioned to the post-secondary level. Student acceptance of evolution was measured to be significantly higher than pre-treatment levels both immediately following and slightly over one year after treatment. Qualitative data from informal questionnaires, from formal course evaluations, and from semi-structured interviews of students engaged in secondary level education and former students at various stages of post-secondary education confirmed that the suspected factors were perceived by participants to have influenced their levels of acceptance of evolution. Furthermore, participant reports provided insight regarding the relative effects they perceived these factors to have had on their evolution acceptance levels. Additionally, many participants reported that their science teachers in public schools had avoided, omitted, or denigrated evolution during instruction, and several of these students expressed frustration regarding what they perceived to have been a lack of education of an important scientific principle. Finally, no students expressed feelings of being offended by having been taught about

Why neurology? Factors which influence career choice in neurology.

Science.gov (United States)

Albert, Dara V; Hoyle, Chad; Yin, Han; McCoyd, Matthew; Lukas, Rimas V

2016-01-01

To evaluate the factors which influence the decision to pursue a career in neurology. An anonymous survey was developed using a Likert scale to rate responses. The survey was sent to adult and child neurology faculty, residents and fellows, as well as medical students applying for neurology. Descriptive statistics were used to analyse the factors of influence. Respondents were subsequently categorized into pre-neurology trainees, neurology trainees, child neurologists and adult neurologists, and differences between the groups were analysed using Pearson's chi-square test. One hundred and thirty-three anonymous responses were received. The respondents were neurologists across all levels of training and practice. Across all respondents, the most common factor of high importance was intellectual content of specialty, challenging diagnostic problems, type of patient encountered and interest in helping people. Responses were similar across the groups; however, the earliest trainees cited interest in helping people as most important, while those in neurology training and beyond cite intellectual content of the specialty as most important. As trainees transition from their earliest levels of clinical experience into working as residents and faculty, there is a shift in the cited important factors. Lifestyle and financial factors seem to be the least motivating across all groups. Encouragement from peers, mentors, faculty and practicing physicians is considered high influences in a smaller number of neurologists. This may present an opportunity for practicing neurologists to make connections with medical students early in their education in an effort to encourage and mentor candidates.

Key Technical Aspects Influencing the Accuracy of Tablet Subdivision.

Science.gov (United States)

Teixeira, Maíra T; Sá-Barreto, Lívia C L; Gratieri, Taís; Gelfuso, Guilherme M; Silva, Izabel C R; Cunha-Filho, Marcílio S S

2017-05-01

Tablet subdivision is a common practice used mainly for dose adjustment. The aim of this study was to investigate how the technical aspects of production as well as the method of tablets subdivision (employing a tablet splitter or a kitchen knife) influence the accuracy of this practice. Five drugs commonly used as subdivided tablets were selected. For each drug, the innovator drug product, a scored-generic and a non-scored generic were investigated totalizing fifteen drug products. Mechanical and physical tests, including image analysis, were performed. Additionally, comparisons were made between tablet subdivision method, score, shape, diluent composition and coating. Image analysis based on surface area was a useful tool as an alternative assay to evaluate the accuracy of tablet subdivision. The tablet splitter demonstrates an advantage relative to a knife as it showed better results in weight loss and friability tests. Oblong, coated and scored tablets had better results after subdivision than round, uncoated and non-scored tablets. The presence of elastic diluents such as starch and dibasic phosphate dehydrate conferred a more appropriate behaviour for the subdivision process than plastic materials such as microcrystalline cellulose and lactose. Finally, differences were observed between generics and their innovator products in all selected drugs with regard the quality control assays in divided tablet, which highlights the necessity of health regulations to consider subdivision performance at least in marketing authorization of generic products.

Social Cultural Factors Influencing Women's Participation in Sports ...

African Journals Online (AJOL)

Social Cultural Factors Influencing Women's Participation in Sports as Perceived by Female Students of the University of Ilorin. ... sports competition while mass media should organize enlightenment programmes that will mitigate the ...

The influence of HRT on technical recall in the UK Breast Screening Programme: are pain, compression force, and compressed breast thickness contributing factors?

International Nuclear Information System (INIS)

Nimmo, L.J.; Alston, L.A.C.; McFadyen, A.K.

2007-01-01

Aim: To investigate recall for technical reasons within the UK Breast Screening Programme, and to determine whether differences exist in those women using hormone replacement therapy (HRT), considering potential associations with reported pain, compression force used and compressed breast thickness (CBT) obtained. Materials and method: A prospective cohort study of 2765 women attending for incident round breast screening appointments who were either HRT users, with a minimum of 1 year duration (n = 1077), or had never used HRT (n = 1688). Data were collected using technical recall records, a radiographer data-collection sheet, and a self-administered participant questionnaire. Results: Sixty-eight (2.5%) participants were recalled for technical reasons of whom 28 (2.6%) were HRT and 40 (2.4%) non-HRT users. This difference was not statistically significant (p = 0.80). Significant differences were found for CBT between those HRT users who were and were not recalled for technical reasons (p < 0.01) and for the similar categories of non-HRT users (p = 0.03). No significant differences were found for force between those HRT users who were recalled or not (p = 0.73) and for the similar categories of non-HRT users (p = 0.07). Similarly no significant differences were found for pain between those HRT users who were recalled or not (p = 0.75) and for the similar categories of non-HRT users (p = 0.73). Conclusion: CBT was the only variable to have both a statistically and a clinically significant relationship with technical recall

Factors influencing the usage of different types of malaria prevention ...

African Journals Online (AJOL)

Objective: To examine factors which influence the use of different types of malaria prevention ... risk areas, religion, education and income influenced ITN usage, whereas only age, malaria .... the uptake of IPTp given that the person would not.

Consumer's Online Shopping Influence Factors and Decision-Making Model

Science.gov (United States)

Yan, Xiangbin; Dai, Shiliang

Previous research on online consumer behavior has mostly been confined to the perceived risk which is used to explain those barriers for purchasing online. However, perceived benefit is another important factor which influences consumers’ decision when shopping online. As a result, an integrated consumer online shopping decision-making model is developed which contains three elements—Consumer, Product, and Web Site. This model proposed relative factors which influence the consumers’ intention during the online shopping progress, and divided them into two different dimensions—mentally level and material level. We tested those factors with surveys, from both online volunteers and offline paper surveys with more than 200 samples. With the help of SEM, the experimental results show that the proposed model and method can be used to analyze consumer’s online shopping decision-making process effectively.

[Analysis of influencing factors of snow hyperspectral polarized reflections].

Science.gov (United States)

Sun, Zhong-Qiu; Zhao, Yun-Sheng; Yan, Guo-Qian; Ning, Yan-Ling; Zhong, Gui-Xin

2010-02-01

Due to the need of snow monitoring and the impact of the global change on the snow, on the basis of the traditional research on snow, starting from the perspective of multi-angle polarized reflectance, we analyzed the influencing factors of snow from the incidence zenith angles, the detection zenith angles, the detection azimuth angles, polarized angles, the density of snow, the degree of pollution, and the background of the undersurface. It was found that these factors affected the spectral reflectance values of the snow, and the effect of some factors on the polarization hyperspectral reflectance observation is more evident than in the vertical observation. Among these influencing factors, the pollution of snow leads to an obvious change in the snow reflectance spectrum curve, while other factors have little effect on the shape of the snow reflectance spectrum curve and mainly impact the reflection ratio of the snow. Snow reflectance polarization information has not only important theoretical significance, but also wide application prospect, and provides new ideas and methods for the quantitative research on snow using the remote sensing technology.

Factors influencing the flavour of game meat: A review.

Science.gov (United States)

Neethling, J; Hoffman, L C; Muller, M

2016-03-01

Flavour is a very important attribute contributing to the sensory quality of meat and meat products. Although the sensory quality of meat includes orthonasal and retronasal aroma, taste, as well as appearance, juiciness and other textural attributes, the focus of this review is primarily on flavour. The influence of species, age, gender, muscle anatomical location, diet, harvesting conditions, ageing of meat, packaging and storage, as well as cooking method on the flavour of game meat are discussed. Very little research is available on the factors influencing the flavour of the meat derived from wild and free-living game species. The aim of this literature review is thus to discuss the key ante- and post-mortem factors that influence the flavour of game meat, with specific focus on wild and free-living South African game species. Copyright © 2015 Elsevier Ltd. All rights reserved.

Factors Influencing Renewable Energy Production & Supply - A Global Analysis

Science.gov (United States)

Ali, Anika; Saqlawi, Juman Al

2016-04-01

Renewable energy is one of the key technologies through which the energy needs of the future can be met in a sustainable and carbon-neutral manner. Increasing the share of renewable energy in the total energy mix of each country is therefore a critical need. While different countries have approached this in different ways, there are some common aspects which influence the pace and effectiveness of renewable energy incorporation. This presentation looks at data and information from 34 selected countries, analyses the patterns, compares the different parameters and identifies the common factors which positively influence renewable energy incorporation. The most successful countries are analysed for their renewable energy performance against their GDP, policy/regulatory initiatives in the field of renewables, landmass, climatic conditions and population to identify the most influencing factors to bring about positive change in renewable energy share.

The Influence Factors and Mechanism of Societal Risk Perception

Science.gov (United States)

Zheng, Rui; Shi, Kan; Li, Shu

Risk perception is one of important subjects in management psychology and cognitive psychology. It is of great value in the theory and practice to investigate the societal hazards that the public cares a lot especially in Socio-economic transition period. A survey including 30 hazards and 6 risk attributes was designed and distributed to about 2, 485 residents of 8 districts, Beijing. The major findings are listed as following: Firstly, a scale of societal risk perception was designed and 2 factors were identified (Dread Risk & Unknown Risk). Secondly, structural equation model was used to analyze the influence factors and mechanism of societal risk perception. Risk preference, government support and social justice could influence societal risk perception directly. Government support fully moderated the relationship between government trust and societal risk perception. Societal risk perception influenced life satisfaction, public policy preferences and social development belief.

Factors influencing HIV seroprevalence rate among pregnant ...

African Journals Online (AJOL)

Human immune deficiency virus (HIV) seroprevalence among pregnant women in Calabar was studied. The aims were to establish HIV seroprevalence rate and to identify factors which influence this rate in our pregnant women. HIV seroprevalence rate of 2.7% among antenatal women in Calabar was recorded with a ...

Factors Influencing Examination Malpractice in Secondary Schools ...

African Journals Online (AJOL)

The main purpose of this study was to investigate factors influencing examination malpractice in some selected secondary schools in Cross River State, Nigeria. A sample of one thousand two hundred (1200) students were selected across the three educational zones of Ogoja, Ikom and Calabar using stratified, random ...

Factors Influencing Smallholder Farmers Participation in IFAD ...

African Journals Online (AJOL)

USER

2015-02-02

Feb 2, 2015 ... This study assessed Factors Influencing smallholder farmers' ... percent of the population engaged in agricultural activities as a career and ... that the major source of income of the poor is agriculture and ... shown that farmers have different reasons for participation in agricultural ... 30 Dan gamau 534. 30.

Exploring Factors That Influence Quality Literature Circles

Science.gov (United States)

Young, Chase; Mohr, Kathleen A. J.

2018-01-01

Research indicates that literature circles are an authentic means for literacy development that students typically enjoy. To better understand the potential value and to add to the research base regarding literature circles, this study, involving 17 fourth graders, explores factors that may influence the quality of literature discussions,…

Socio-economic factors influencing cassava production in Kuje and ...

African Journals Online (AJOL)

This study examined socio-economic factors influencing output level of cassava production in Kuje and Abaji Area Councils of Federal Capital Territory, Abuja. The specific objectives were to:identify the socio-economic characteristics of sampled cassava farmers in the study area; determine the socio-economic factors ...

Factors influencing conformity index in radiotherapy for non-small cell lung cancer.

LENUS (Irish Health Repository)

Brennan, Sinead M

2010-01-01

The radiotherapy conformity index (CI) is a useful tool to quantitatively assess the quality of radiotherapy treatment plans, and represents the relationship between isodose distributions and target volume. A conformity index of unity implies high planning target volume (PTV) coverage and minimal unnecessary irradiation of surrounding tissues. We performed this analysis to describe the CI for lung cancer 3-dimensional conformal radiotherapy (3DCRT) and to identify clinical and technical determinants of CI, as it is not known which factors are associated with good quality 3D conformal radiotherapy treatment planning. Radiotherapy treatment plans from a database of 52 patients with inoperable Stage 1 to 3b lung cancer, on a hypofractionated 3DCRT trial were evaluated. A CI was calculated for all plans using the definition of the ICRU 62:CI = (TV\\/PTV), which is the quotient of the treated volume (TV) and the PTV. Data on patient, tumor, and planning variables, which could influence CI, were recorded and analyzed. Mean CI was 2.01 (range = 1.06-3.8). On univariate analysis, PTV (p = 0.023), number of beams (p = 0.036), medial vs. lateral tumor location (p = 0.016), and increasing tumor stage (p = 0.041) were associated with improved conformity. On multiple regression analysis, factors found to be associated with CI included central vs. peripheral tumor location (p = 0.041) and PTV size (p = 0.058). The term 3DCRT is used routinely in the literature, without any indication of the degree of conformality. We recommend routine reporting of conformity indices. Conformity indices may be affected by both planning variables and tumor factors.

Physico-chemical and biotic factors influencing microalgal seed ...

African Journals Online (AJOL)

Physico-chemical and biotic factors influencing microalgal seed culture propagation for inoculation of a ... African Journal of Biotechnology ... used to inoculate an open raceway pond for large scale biomass production for biodiesel production.

Factors influencing global antiretroviral procurement prices.

Science.gov (United States)

Wirtz, Veronika J; Forsythe, Steven; Valencia-Mendoza, Atanacio; Bautista-Arredondo, Sergio

2009-11-18

Antiretroviral medicines (ARVs) are one of the most costly parts of HIV/AIDS treatment. Many countries are struggling to provide universal access to ARVs for all people living with HIV and AIDS. Although substantial price reductions of ARVs have occurred, especially between 2002 and 2008, achieving sustainable access for the next several decades remains a major challenge for most low- and middle-income countries. The objectives of the present study were twofold: first, to analyze global ARV prices between 2005 and 2008 and associated factors, particularly procurement methods and key donor policies on ARV procurement efficiency; second, to discuss the options of procurement processes and policies that should be considered when implementing or reforming access to ARV programs. An ARV-medicines price-analysis was carried out using the Global Price Reporting Mechanism from the World Health Organization. For a selection of 12 ARVs, global median prices and price variation were calculated. Linear regression models for each ARV were used to identify factors that were associated with lower procurement prices. Logistic regression models were used to identify the characteristics of those countries which procure below the highest and lowest direct manufactured costs. Three key factors appear to have an influence on a country's ARV prices: (a) whether the product is generic or not; (b) the socioeconomic status of the country; (c) whether the country is a member of the Clinton HIV/AIDS Initiative. Factors which did not influence procurement below the highest direct manufactured costs were HIV prevalence, procurement volume, whether the country belongs to the least developed countries or a focus country of the United States President's Emergency Plan For AIDS Relief. One of the principal mechanisms that can help to lower prices for ARV over the next several decades is increasing procurement efficiency. Benchmarking prices could be one useful tool to achieve this.

Influencing factors on the visibility of surface distresses

Science.gov (United States)

Smęt, Wojciech; Skakuj, Marek

2018-05-01

A systematic and future-oriented maintenance management requires quality-assured data regarding the condition of the roadway. An important characteristic for assessing the condition of the road surface are cracks [1]. Experience has proven that the road surface temperature and residual humidity can influence the visibility of cracks. To investigate and quantify these influencing factors in more detail, the Federal Ministry of Transport and Digital Infrastructure has implemented a comprehensive research project [2], during which several measurement campaigns were carried out at different seasons and at different temperatures and humidity degrees of the road surface. The visibility of the cracks was assessed using the German approach ZTV ZEB-StB [3]. After evaluating the cracks, the data was synchronized and the network allocation of the geo-referenced raw data was realized. The relevant condition performance indicators were calculated subsequently. For each evaluation section of 100 meters length, the mean road surface temperature was calculated and, if available, the type and year of construction of the surface course was determined. The evaluated data was visualized to establish correlations between the data and the influencing factors. For the statistical analysis of the results, a total of six comparative scenarios were defined in which the influencing factors of road surface temperature and residual humidity were assessed. This paper documents the results of the research project. In order to obtain a uniform and comparable picture of the condition of the road surface over the years and thus to be able to observe the aging process of the road surface, the measurement campaigns are to be carried out under defined conditions. The research project included proposals for defining and further specifying the measurement conditions.

Influence of atmospheric factors on the rheumatic diseases

Energy Technology Data Exchange (ETDEWEB)

Latman, N S

1987-01-01

This paper reviews the influence of atmospheric factors on rheumatic diseases - rheumatoid arthritis, unspecified arthritis, gout, and systemic lupus erythematosis (SLE). The authors state that there appears to be ample evidence to conclude that various atmospheric factors do exert a significant impact on some people with various rheumatic diseases. The data are, however, crude relative to the authors general understanding. They recommend as a logical progression of research the determination of the effects of the meteorological/atmospheric factors of concern on the specific intrinsic mediators of inflammation.

Impact of Environmental Regulation and Technical Progress on Industrial Carbon Productivity: An Approach Based on Proxy Measure

Directory of Open Access Journals (Sweden)

Huan Zhang

2016-08-01

Full Text Available This research aims to study the main influencing factors of China’s industrial carbon productivity by incorporating environmental regulation and technical progress into an econometric model. The paper focuses on data from 35 of China’s industrial sectors and covers the period from 2006 to 2014, in order to examine the impact of environmental regulation and technical progress on carbon productivity. Methods applied include panel fixed effect model, panel random effect model and two stage least squares with instrumental variables (IV-2SLS. The effect of environmental regulation and technical progress has industrial heterogeneity. The paper subdivides industrial sectors into capital and technology intensive, resource intensive and labor intensive sectors according to factor intensiveness. The estimation results of the subgroups have uncovered that for capital and technology intensive and resource intensive sectors, environmental regulation has a more significant impact than technical progress; while for labor intensive sectors, innovation more significantly influences carbon productivity. In addition, foreign direct investment (FDI and industrialization level facilitate improving carbon productivity for the full sample. By contrast, industrial structure inhibits the overall industrial carbon productivity. The industry-specific results indicate that for capital and technology intensive sectors, optimizing of the industrial structure can improve carbon productivity; for resource intensive sectors, FDI and energy consumption structure should be emphasized more; for labor intensive sectors, industrialization levels help enhance carbon productivity. Finally the industrial sector-specific policy suggestions are proposed.

Attitudes, norms and controls influencing lifestyle risk factor management in general practice

Directory of Open Access Journals (Sweden)

McKenzie Suzanne H

2009-08-01

Full Text Available Abstract Background With increasing rates of chronic disease associated with lifestyle behavioural risk factors, there is urgent need for intervention strategies in primary health care. Currently there is a gap in the knowledge of factors that influence the delivery of preventive strategies by General Practitioners (GPs around interventions for smoking, nutrition, alcohol consumption and physical activity (SNAP. This qualitative study explores the delivery of lifestyle behavioural risk factor screening and management by GPs within a 45–49 year old health check consultation. The aims of this research are to identify the influences affecting GPs' choosing to screen and choosing to manage SNAP lifestyle risk factors, as well as identify influences on screening and management when multiple SNAP factors exist. Methods A total of 29 audio-taped interviews were conducted with 15 GPs and one practice nurse over two stages. Transcripts from the interviews were thematically analysed, and a model of influencing factors on preventive care behaviour was developed using the Theory of Planned Behaviour as a structural framework. Results GPs felt that assessing smoking status was straightforward, however some found assessing alcohol intake only possible during a formal health check. Diet and physical activity were often inferred from appearance, only being assessed if the patient was overweight. The frequency and thoroughness of assessment were influenced by the GPs' personal interests and perceived congruence with their role, the level of risk to the patient, the capacity of the practice and availability of time. All GPs considered advising and educating patients part of their professional responsibility. However their attempts to motivate patients were influenced by perceptions of their own effectiveness, with smoking causing the most frustration. Active follow-up and referral of patients appeared to depend on the GPs' orientation to preventive care, the

Attitudes, norms and controls influencing lifestyle risk factor management in general practice.

Science.gov (United States)

Ampt, Amanda J; Amoroso, Cheryl; Harris, Mark F; McKenzie, Suzanne H; Rose, Vanessa K; Taggart, Jane R

2009-08-26

With increasing rates of chronic disease associated with lifestyle behavioural risk factors, there is urgent need for intervention strategies in primary health care. Currently there is a gap in the knowledge of factors that influence the delivery of preventive strategies by General Practitioners (GPs) around interventions for smoking, nutrition, alcohol consumption and physical activity (SNAP). This qualitative study explores the delivery of lifestyle behavioural risk factor screening and management by GPs within a 45-49 year old health check consultation. The aims of this research are to identify the influences affecting GPs' choosing to screen and choosing to manage SNAP lifestyle risk factors, as well as identify influences on screening and management when multiple SNAP factors exist. A total of 29 audio-taped interviews were conducted with 15 GPs and one practice nurse over two stages. Transcripts from the interviews were thematically analysed, and a model of influencing factors on preventive care behaviour was developed using the Theory of Planned Behaviour as a structural framework. GPs felt that assessing smoking status was straightforward, however some found assessing alcohol intake only possible during a formal health check. Diet and physical activity were often inferred from appearance, only being assessed if the patient was overweight. The frequency and thoroughness of assessment were influenced by the GPs' personal interests and perceived congruence with their role, the level of risk to the patient, the capacity of the practice and availability of time. All GPs considered advising and educating patients part of their professional responsibility. However their attempts to motivate patients were influenced by perceptions of their own effectiveness, with smoking causing the most frustration. Active follow-up and referral of patients appeared to depend on the GPs' orientation to preventive care, the patient's motivation, and cost and accessibility of

Motivational factors influencing nurses to undertake postgraduate hospital-based education.

Science.gov (United States)

Kinsella, Danny; Fry, Margaret; Zecchin, Alison

2018-05-01

Specialist postgraduate education improves patient health outcomes, and assists in meeting the emerging specialisation of nursing practice. The aim of this study was to investigate the motivational factors that influence nurses' engagement with hospital-based postgraduate education. The research design was descriptive and exploratory, using a survey method. The survey consisted of demographic details, the Participation Reasons Scale (PRS) and open-ended questions. Thirty-four participants (100%) completed the survey. Of the PRS extrinsic and intrinsic factors, Professional Improvement and Development (Factor 1) and Professional Service (Factor 2), both intrinsic factors, ranked the highest. Therefore, this study identified that intrinsic motivation factors influenced engagement with postgraduate specialty programs for early career nurses. These results highlight the importance of intrinsic motivation factors for a nursing workforce and how this can potentially drive behaviour and decision making. A better understanding of motivation factors across a nurse's career could lead to educational strategies that optimise postgraduate program engagement to better support healthcare delivery and a culture of lifelong learning. Copyright © 2018. Published by Elsevier Ltd.

Factors influencing cancer treatment decision-making by indigenous peoples: a systematic review.

Science.gov (United States)

Tranberg, Rona; Alexander, Susan; Hatcher, Deborah; Mackey, Sandra; Shahid, Shaouli; Holden, Lynda; Kwok, Cannas

2016-02-01

We aim to systematically review studies that identify factors influencing cancer treatment decision-making among indigenous peoples. Following the outline suggested by the Preferred Reporting Items for Systematic Review and Meta-analysis, a rigorous systematic review and meta-synthesis were conducted of factors that influence cancer treatment decision-making by indigenous peoples. A total of 733 articles were retrieved from eight databases and a manual search. After screening the titles and abstracts, the full text of 26 articles were critically appraised, resulting in five articles that met inclusion criteria for the review. Because the five articles to be reviewed were qualitative studies, the Critical Appraisal Skills Program toolkit was used to evaluate the methodological quality. A thematic synthesis was employed to identify common themes across the studies. Multiple socio-economic and cultural factors were identified that all had the potential to influence cancer treatment decision-making by indigenous people. These factors were distilled into four themes: spiritual beliefs, cultural influences, communication and existing healthcare systems and structures. Although existing research identified multiple factors influencing decision-making, this review identified that quality studies in this domain are scarce. There is scope for further investigation, both into decision-making factors and into the subsequent design of culturally appropriate programmes and services that meet the needs of indigenous peoples. Copyright © 2015 John Wiley & Sons, Ltd.

Factors influencing early stage healthcare-academia partnerships.

Science.gov (United States)

Uvhagen, Håkan; von Knorring, Mia; Hasson, Henna; Øvretveit, John; Hansson, Johan

2018-02-12

Purpose The purpose of this paper is to explore factors influencing early implementation and intermediate outcomes of a healthcare-academia partnership in a primary healthcare setting. Design/methodology/approach The Academic Primary Healthcare Network (APHN) initiative was launched in 2011 in Stockholm County, Sweden and included 201 primary healthcare centres. Semi-structured interviews were conducted in 2013-2014 with all coordinating managers ( n=8) and coordinators ( n=4). A strategic change model framework was used to collect and analyse data. Findings Several factors were identified to aid early implementation: assignment and guidelines that allowed flexibility; supportive management; dedicated staff; facilities that enabled APHN actions to be integrated into healthcare practice; and positive experiences from research and educational activities. Implementation was hindered by: discrepancies between objectives and resources; underspecified guidelines that trigger passivity; limited research and educational activities; a conflicting non-supportive reimbursement system; limited planning; and organisational fragmentation. Intermediate outcomes revealed that various actions, informed by the APHN assignment, were launched in all APHNs. Practical implications The findings can be rendered applicable by preparing stakeholders in healthcare services to optimise early implementation of healthcare-academia partnerships. Originality/value This study increases understanding of interactions between factors that influence early stage partnerships between healthcare services and academia in primary healthcare settings.

Factors influencing laser cutting of wood

Energy Technology Data Exchange (ETDEWEB)

Barnekov, V. G.; McMillin, C. W.; Huber, H. A.

1986-07-01

Factors influencing the ability of lasers to cut wood may be generally classified into these three areas: 1) characteristics of the laser beam; 2) equipment and processing variables; and 3) properties of the work piece. Effects of beam power, mode, polarization, and stability are discussed as are aspects of optics, location of focal point, feed speed, gas-jet assist system and work piece thickness, density, and moisture content. (author)

Important factors influencing the return to work after stroke.

Science.gov (United States)

Wang, Ying-Chih; Kapellusch, Jay; Garg, Arun

2014-01-01

As the field of rehabilitation shifts its focus towards improving functional capacity instead of managing disability, return to work (RTW) and return to the community emerge as key goals in a person's recovery from major disabling illness such as stroke. To compile important factors believed to influence RTW after a stroke. Based on a comprehensive literature review, we clustered similar factors and organized these factors based on the International Classification of Function, Disability and Health (ICF) framework: body functions or structure, activity participation, environmental factors and personal and psychosocial factors. Overall, stroke severity, as assessed by the degree of residual disability such as weakness, neurological deficit or impairments (speech, cognition, apraxia, agnosia), has been shown to be the most consistent negative predictor of RTW. Many factors such as the number of working years remaining until retirement, depression, medical history, and occupation need to be taken into consideration for stroke survivors, as they can influence RTW decision making. Stroke survivors who are flexible and realistic in their vocational goal and emotionally accept their disability appear more likely to return to work. There are many barriers to employment for stroke survivors ranging from physical and cognitive impairments to psychosocial and environmental factors.

Investigating important factors influencing purchasing from chains

Directory of Open Access Journals (Sweden)

Naser Azad

2012-04-01

Full Text Available In this paper, we survey important factors, influencing customers to buy more from one of well known food market operating in capital city of Iran named Shahrvand. The survey studies the effects of six factors including customer's perception, persuasive factors, brand, customers' expectations, product's characteristics and special features of store on attracting more customers. We have distributed questionnaire among 196 customers who regularly visit stores and analyzed details of the data. The results indicate that customers' perception is the most important item, which includes eight components. Years of experience is the most important item in our survey followed by impact of color and working hours. Diversity of services is another factor, which plays the most important role followed by quality of services. Next, fidelity and brand are other most important factors and the name of store and risk are in lower degree of importance.

Factors that Influence RF Breakdown in Antenna Systems

Science.gov (United States)

Caughman, J. B. O.; Baity, F. W.; Rasmussen, D. A.; Aghazarian, M.; Castano Giraldo, C. H.; Ruzic, David

2007-11-01

One of the main power-limiting factors in antenna systems is the maximum voltage that the antenna or vacuum transmission line can sustain before breaking down. The factors that influence RF breakdown are being studied in a resonant 1/4-wavelength section of vacuum transmission line terminated with an open circuit electrode structure. Breakdown can be initiated via electron emission by high electric fields and by plasma formation in the structure, depending on the gas pressure. Recent experiments have shown that a 1 kG magnetic field can influence plasma formation at pressures as low as 8x10-5 Torr at moderate voltage levels (LLC, for the U.S. Dept. of Energy under contract DE-AC05-00OR22725. Work supported by USDOE with grant DE-FG02-04ER54765

Influence of breed and environmental factors on litter parameters of ...

African Journals Online (AJOL)

Influence of breed and environmental factors on litter parameters of rabbits ... There was a non-significant effect of season on litter site at birth, kits alive at birth and ... to rabbit reproduction as it influenced negatively more litter parameters than ...

Factors influencing e-Procurement adoption in the Nigerian building industry

Directory of Open Access Journals (Sweden)

Eziyi Offia Ibem

2016-12-01

Full Text Available Against the backdrop of increasing adoption of e-Procurement in supply chain management, there is a need for adequate knowledge of the factors that influence the decision by organizations in the building industry to use e-Procurement. This study aims to fill the knowledge gap through investigating the factors influencing e-Procurement adoption based on the data sourced in a questionnaire survey involving 213 organizations in the building industry. The survey was conducted between June and November 2015 in Nigeria. Descriptive statistics, factor and categorical regression analyses were used to analyze the data. The results show that the three most important factors influencing the adoption of e-Procurement amongst the participants, in order of importance, were: the benefits of e-Procurement in enhancing efficiency in project delivery; eliminating geographic barriers and effective communication among project team members. The 29 factors were investigated in seven different dimensions - the benefits of e-Procurement use; level of awareness on e-Procurement in construction; and the availability and cost of e-Procurement applications emerged as the three most significant predictors of e-Procurement adoption in the survey. The study concludes by identifying strategies that should be engaged in increasing the uptake and maximizing the benefits of e-Procurement in the Nigerian building industry.

Professionalism: the major factor influencing job satisfaction among Korean and Chinese nurses.

Science.gov (United States)

Hwang, J-I; Lou, F; Han, S S; Cao, F; Kim, W O; Li, P

2009-09-01

The nursing shortage has become an internationally important issue. Nurses' professionalism and job satisfaction have been recognized as strong factors influencing their turnover. As international interchanges in nursing education are growing between Korea and China, understanding the commonalities and differences in factors associated with job satisfaction is critical to improving nurses' job retention. To compare the factors influencing job satisfaction among Korean and Chinese nurses. A cross-sectional survey was conducted. The participants were comprised of 693 nurses at three general hospitals in Jinan, People's Republic of China and 593 nurses at two general hospitals in Seoul, Korea. A questionnaire was designed to measure the nurses' professionalism and job satisfaction. Stepwise multiple regression analysis was performed to identify factors related to job satisfaction. Professionalism was the common factor influencing job satisfaction in Korean and Chinese nurses. Professionalism was positively related to job satisfaction in both groups. Additional factors associated with job satisfaction were demographics and job characteristics such as age, job position and department of work, which were significant only in Korean nurses. Professionalism was the most important factor influencing job satisfaction in both Korean and Chinese nurses. Enhancing nursing professionalism is recommended as a common strategy to improve nurses' job retention across different healthcare systems.

Critical Factors Influencing Viability of Wave Energy Converters in Off-Grid Luxury Resorts and Small Utilities

Directory of Open Access Journals (Sweden)

Aksel Botne Sandberg

2016-12-01

Full Text Available This paper examines technical and non-technical factors that are critical to the viability of commercialization of wave energy converters in off-grid luxury resorts and small utilities. Critical factors are found by investigating Levelized Cost of Energy, and using the tools PESTEL and Porter’s five competitive forces. Identified factors are then applied on three business cases to investigate their impact on viability. The results show that one of the main challenges facing off-grid commercialization is the few wave energy converter units installed per location, negating the economy of scale that large wave energy farms count on to achieve competitive cost levels. In addition, factors like current cost of energy, available wave resources, distance from shore, infrastructure, supply chain logistics, and electricity demand are found to be deciding factors for viability. Despite these challenges, it is found that there are potentially viable off-grid business cases for commercialization of wave energy converters.

The early adoption of green power by Dutch households An empirical exploration of factors influencing the early adoption of green electricity for domestic purposes

International Nuclear Information System (INIS)

Arkesteijn, Karlijn; Oerlemans, Leon

2005-01-01

The results of this study provide empirical insight into factors influencing the early adoption of green electricity by Dutch residential users. Earlier research revealed that early adoption is closely related to social visibility, which is lacking in the case of green power. This raises the question of which factors influence adoption in the absence of visibility. The contributions of this study are threefold. First, we used a theoretical perspective in which a cognitive approach was combined with an economic approach leading to a more comprehensive framework. Second, the empirical focus on residential users of renewable resources is relatively new. Third, the results of our analyses provide insights into factors influencing early (non-)adoption, knowledge which could be valuable to market actors and governments stimulating the adoption of sustainable consumer products. For our theoretical framework, we distinguished three sets of independent variables: factors related to (1) the technical system, (2) individuals, and (3) economic issues. Data collection took place among households just 1 month before the liberalisation of the Dutch green electricity market, creating a unique database of residential (non-)users. Our results show that the proposed extended model is more powerful than partial models. Moreover, our findings suggest that cognitive and economic intentional variables, as well as variables indicating basic knowledge and actual environmental behaviour in the past, are strong predictors of the probability of adoption. The paper closes with research-based recommendations for practitioners

EDI and the Technical Communicator.

Science.gov (United States)

Eiler, Mary Ann

1994-01-01

Assesses the role of technical communicators in electronic data interchange (EDI). Argues that, as experts in information design, human factors, instructional theory, and professional writing, technical communicators should be advocates of standard documentation protocols and should rethink the traditional concepts of "document" to…

Allocative and Technical Efficiency Analysis of Cassava Farming in Bitefa Village, East Miofamo District, Middle North Timor

Directory of Open Access Journals (Sweden)

Abdul Wahib Muhaimin

2018-01-01

Full Text Available Cassava is a food crop with great economic value since its cost is affordable and has been passed down to the generation.  People at Bitefa village are majority a farmer who depends their life on agriculture to meet the needs. Problems faced by farmers in farming cassava at Bitefa village are farming management that is not in accordance with the guidelines and the use of factors of production that is not suitable for the dose recommended. This suggests that the use of factors of production are not efficient. Research objectives are: (1 to analyze the factors that affect the production of cassava, (2 to analyze the level of allocative and technical efficiency, (3 to analyze factors that affect technical inefficiency. The efficient use of factors of production is expected to increase production and income for farmers of cassava. The result obtained using stochastic frontier production function analysis is that the influence of cassava farming real production is the production of land and seeds. Meanwhile, labor, cost factors and the use of manure have no effect on the real production of cassava. The technical efficiency level of cassava farming in the research area is the lowest by 0.80 of which amounted to 0.99. While the level of NPMxPx for land use allocative efficiency is 1 so that the allocation of land use in the area of research has not been efficient. NPMxPx for the use of seed allocation is 1 so that the use of seedlings is also not efficient. Nonformal education influence is real and marked positive effect against inefficiency. Formal education is marked negative but having a real effect against the inefficiency. Farmer's age is marked negative and not real, while the experience and the number of family members are marked positive but having no real effect on the production of cassava.

External factors influencing the environmental performance of South African firms

CSIR Research Space (South Africa)

Peart, R

2001-01-01

Full Text Available This article reviews the external factors that influence environmental performance of companies in South Africa, drawing on international and local literature. After considering factors within the natural, social, economic and institutional...

Nursing students' learning dynamics and influencing factors in clinical contexts.

Science.gov (United States)

Lee, Jung Jae; Clarke, Charlotte L; Carson, Maggie N

2018-03-01

Clinical placements are essential for students to develop clinical skills to qualify as nurses. However, various difficulties encountered by nursing students during their clinical education detract from developing clinical competencies. This constructivist grounded theory study aims to explore nursing students' experiences in clinical nursing education, and to identify the factors that influence the clinical education students receive. Twenty-one individual and six group semi-structured interviews were conducted with sixteen fourth year nursing students and four registered nurses. This research identified six factors that influence nursing students' clinical education: interpersonal, socio-cultural, instructional, environmental, emotional and physical factors. The research has developed a dynamic model of learning in clinical contexts, which offers opportunities to understand how students' learning is influenced multifactorially during clinical placements. The understanding and application of the model can improve nursing instructional design, and subsequently, nursing students' learning in clinical contexts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Factors influencing recovery and restoration following a chemical incident.

Science.gov (United States)

Peña-Fernández, A; Wyke, S; Brooke, N; Duarte-Davidson, R

2014-11-01

Chemicals are an important part of our society. A wide range of chemicals are discharged into the environment every day from residential, commercial and industrial sources. Many of these discharges do not pose a threat to public health or the environment. However, global events have shown that chemical incidents or accidents can have severe consequences on human health, the environment and society. It is important that appropriate tools and technical guidance are available to ensure that a robust and efficient approach to developing a remediation strategy is adopted. The purpose of remediation is to protect human health from future exposure and to return the affected area back to normal as soon as possible. There are a range of recovery options (techniques or methods for remediation) that are applicable to a broad range of chemicals and incidents. Recovery options should be evaluated according to their appropriateness and efficacy for removing contaminants from the environment; however economic drivers and social and political considerations often influence decision makers on which remedial actions are implemented during the recovery phase of a chemical incident. To date, there is limited information in the literature on remediation strategies and recovery options that have been implemented following a chemical incident, or how successful they have been. Additional factors that can affect the approach taken for recovery are not well assessed or understood by decision makers involved in the remediation and restoration of the environment following a chemical incident. The identification of this gap has led to the development of the UK Recovery Handbook for Chemical Incidents to provide a framework for choosing an effective recovery strategy. A compendium of practical evidence-based recovery options (techniques or methods for remediation) for inhabited areas, food production systems and water environments has also been developed and is included in the chemical

Factors influencing behavior in the forced swim test

Science.gov (United States)

Bogdanova, Olena V.; Kanekar, Shami; D’Anci, Kristen E.; Renshaw, Perry F.

2017-01-01

The forced swim test (FST) is a behavioral test in rodents which was developed in 1978 by Porsolt and colleagues as a model for predicting the clinical efficacy of antidepressant drugs. A modified version of the FST added the classification of active behaviors into swimming and climbing, in order to facilitate the differentiation between serotonergic and noradrenergic classes of antidepressant drugs. The FST is now widely used in basic research and the pharmaceutical screening of potential antidepressant treatments. It is also one of the most commonly used tests to assess depressive-like behavior in animal models. Despite the simplicity and sensitivity of the FST procedure, important differences even in baseline immobility rates have been reported between different groups, which complicate the comparison of results across studies. In spite of several methodological papers and reviews published on the FST, the need still exists for clarification of factors which can influence the procedure. While most recent reviews have focused on antidepressant effects observed with the FST, this one considers the methodological aspects of the procedure, aiming to summarize issues beyond antidepressant action in the FST. The previously published literature is analyzed for factors which are known to influence animal behavior in the FST. These include biological factors, such as strain, age, body weight, gender and individual differences between animals; influence of preconditioning before the FST: handling, social isolation or enriched environment, food manipulations, various kinds of stress, endocrine manipulations and surgery; schedule and routes of treatment, dosage and type of the drugs as well as experimental design and laboratory environmental effects. Consideration of these factors in planning experiments may result in more consistent FST results. PMID:23685235

Factors Influencing the Spatial Difference in Household Energy Consumption in China

Directory of Open Access Journals (Sweden)

Yongxia Ding

2016-12-01

Full Text Available What factors determine the spatial heterogeneity of household energy consumption (HEC in China? Can the impacts of these factors be quantified? What are the trends and characteristics of the spatial differences? To date, these issues are still unclear. Based on the STIRPAT model and panel dataset for 30 provinces in China over the period 1997–2013, this paper investigated influences of the income per capita, urbanization level and annual average temperature on HEC, and revealed the spatial effects of these influencing factors. The results show that the income level is the main influencing factor, followed by the annual average temperature. There exists a diminishing marginal contribution with increasing income. The influence of urbanization level varies according to income level. In addition, from the eastern region to western region of China, variances largely depend upon economic level at the provincial level. From the northern region to southern region, change is mainly caused by temperature. The urbanization level has more significant impact on the structure and efficiency of household energy consumption than on its quantity. These results could provide reference for policy making and energy planning.

[Coagulation factor VII levels in uremic patients and theirs influence factors].

Science.gov (United States)

Fang, Jun; Xia, Ling-Hui; Wei, Wen-Ning; Song, Shan-Jun

2004-12-01

This study was aimed to investigate coagulation factor VII level in uremic patients with chronic renal failure and to explore theirs influence factors. The plasma levels of coagulation factor VII were detected in 30 uremic patients with chronic renal failure before and after hemodialysis for 1 month, the factor VII activity (FVII:C) was determined by one-stage coagulation method, while activated factor VII (FVIIa) was measured by one-stage coagulation method using recombinant soluble tissue factor, and factor VII antigen was detected by ELISA. The results showed that: (1) The FVIIa, FVII:C and FVIIAg levels in chronic uremic patients before hemodialysis were 4.00 +/- 0.86 microg/L, (148.5 +/- 40.4)% and (99.8 +/- 21.1)% respectively, which were significantly increased, as compared with healthy controls [2.77 +/- 1.02 microg/L, (113.1 +/- 33.0)% and (73.7 +/- 18.3)% respectively, P factor VII was positively correlated with levels of blood uria nitrogen and serum creatinine before hemodialysis but not after hemodialysis. It is concluded that the enhanced levels of coagulation factor VII in chronic uremic patients suggested abnormal activated state, herperactivity and elevated production of factor VII which correlated with renal functional injury. The abnormality of factor VII in uremia may be aggravated by hemodialysis. Coagulation factor (FVII) may be a risk factor for cardiovascular events in uremic patients who especially had been accepted long-term hemodialysis.

Factors influencing tinnitus loudness and annoyance.

Science.gov (United States)

Hiller, Wolfgang; Goebel, Gerhard

2006-12-01

To evaluate the 2 major components of tinnitus severity, loudness and annoyance, and their degree of dependence on characteristics of tinnitus manifestation, history, and etiology. Cross-sectional survey performed during the first months of 2004. Nonclinical population. A total of 4995 members of the German Tinnitus League. Comprehensive screening questionnaire, including the Klockhoff and Lindblom loudness grading system and the miniversion of the Tinnitus Questionnaire. A moderate correlation of 0.45 was found between tinnitus loudness and annoyance. Both factors were generally higher in men, those older than 50 years, those with binaural and centrally perceived tinnitus, those with increased noise sensitivity, and those who had continuous tinnitus without interruptions. Tinnitus that lasted 12 months or less had a stronger influence on annoyance (odds ratio [OR], 1.96) than on loudness (OR, 0.45), whereas the contrary was found for tinnitus of more than 5 years' duration (ORs, 0.72 and 2.11, respectively). Loudness and annoyance were increased in subjects with coexisting hearing loss, vertigo, and hyperacusis. The impact of hyperacusis on annoyance was clearly stronger than on loudness (ORs, 21.91 vs 9.47). Several clinical factors of tinnitus influence perceived loudness and annoyance. Both are distinguishable components of tinnitus severity.

Assessing the Factors Influencing Women Attainment of Household ...

African Journals Online (AJOL)

This study assessed the factors influencing the attainment of household food security in Ikwuano ... Data analysis utilized descriptive statistics such as frequency counts, ... had no access to credits, 71.7% had no contact with extension service.

Evaluation of some genetic factors influencing the phenotypic ...

African Journals Online (AJOL)

Evaluation of some genetic factors influencing the phenotypic severity of β thalassemia Egyptian patients. Ibtessam R Hussein, Amina M Medhat, Samir F Zohny, Alice K Abd El-Aleem, Ghada Y El-Kammah, Bardees M Foda ...

Factors influencing the adoption of smartphones by undergraduate ...

African Journals Online (AJOL)

Factors influencing the adoption of smartphones by undergraduate students at ... ha ve thus far c oncentrated on the adoption of mobile technologies especially ... who may also want to explore the implementation of mobile learning systems, ...

38 FACTORS THAT INFLUENCE IRON STATUS OF PREGNANT ...

African Journals Online (AJOL)

sys01

The study investigated the factors that influence iron ... approaches employed for promotion of girl-child education and prevention of adolescent .... purchase food items rich in haem iron such as ... decision making, life style options, and control.

Technical issues relating to the statistical parametric mapping of brain SPECT studies

International Nuclear Information System (INIS)

Hatton, R.L.; Cordato, N.; Hutton, B.F.; Lau, Y.H.; Evans, S.G.

2000-01-01

Full text: Statistical Parametric Mapping (SPM) is a software tool designed for the statistical analysis of functional neuro images, specifically Positron Emission Tomography and functional Magnetic Resonance Imaging, and more recently SPECT. This review examines some problems associated with the analysis of SPECT. A comparison of a patient group with normal studies revealed factors that could influence results, some that commonly occur, others that require further exploration. To optimise the differences between two groups of subjects, both spatial variability and differences in global activity must be minimised. The choice and effectiveness of co registration method and approach to normalisation of activity concentration can affect the optimisation. A small number of subject scans were identified as possessing truncated data resulting in edge effects that could adversely influence the analysis. Other problems included unusual areas of significance possibly related to reconstruction methods and the geometry associated with nonparallel collimators. Areas of extra cerebral significance are a point of concern - and may result from scatter effects, or mis registration. Difficulties in patient positioning, due to postural limitations, can lead to resolution differences. SPM has been used to assess areas of statistical significance arising from these technical factors, as opposed to areas of true clinical significance when comparing subject groups. This contributes to a better understanding of the effects of technical factors so that these may be eliminated, minimised, or incorporated in the study design. Copyright (2000) The Australian and New Zealand Society of Nuclear Medicine Inc

Classification analysis of organization factors related to system safety

International Nuclear Information System (INIS)

Liu Huizhen; Zhang Li; Zhang Yuling; Guan Shihua

2009-01-01

This paper analyzes the different types of organization factors which influence the system safety. The organization factor can be divided into the interior organization factor and exterior organization factor. The latter includes the factors of political, economical, technical, law, social culture and geographical, and the relationships among different interest groups. The former includes organization culture, communication, decision, training, process, supervision and management and organization structure. This paper focuses on the description of the organization factors. The classification analysis of the organization factors is the early work of quantitative analysis. (authors)

Analysis on influence factors of China's CO2 emissions based on Path-STIRPAT model

International Nuclear Information System (INIS)

Li Huanan; Mu Hailin; Zhang Ming; Li Nan

2011-01-01

With the intensification of global warming and continued growth in energy consumption, China is facing increasing pressure to cut its CO 2 (carbon dioxide) emissions down. This paper discusses the driving forces influencing China's CO 2 emissions based on Path-STIRPAT model-a method combining Path analysis with STIRPAT (stochastic impacts by regression on population, affluence and technology) model. The analysis shows that GDP per capita (A), industrial structure (IS), population (P), urbanization level (R) and technology level (T) are the main factors influencing China's CO 2 emissions, which exert an influence interactively and collaboratively. The sequence of the size of factors' direct influence on China's CO 2 emission is A>T>P>R>IS, while that of factors' total influence is A>R>P>T>IS. One percent increase in A, IS, P, R and T leads to 0.44, 1.58, 1.31, 1.12 and -1.09 percentage change in CO 2 emission totally, where their direct contribution is 0.45, 0.07, 0.63, 0.08, 0.92, respectively. Improving T is the most important way for CO 2 reduction in China. - Highlights: → We analyze the driving forces influencing China's CO 2 emissions. → Five macro factors like per capita GDP are the main influencing factors. → These factors exert an influence interactively and collaboratively. → Different factors' direct and total influence on China's CO 2 emission is different. → Improving technology level is the most important way for CO 2 reduction in China.

The Factors Influencing Satisfaction with Public City Transport: A Structural Equation Modelling Approach

Directory of Open Access Journals (Sweden)

Pawlasova Pavlina

2015-12-01

Full Text Available Satisfaction is one of the key factors which influences customer loyalty. We assume that the satisfied customer will be willing to use the ssame service provider again. The overall passengers´ satisfaction with public city transport may be affected by the overall service quality. Frequency, punctuality, cleanliness in the vehicle, proximity, speed, fare, accessibility and safety of transport, information and other factors can influence passengers´ satisfaction. The aim of this paper is to quantify factors and identify the most important factors influencing customer satisfaction with public city transport within conditions of the Czech Republic. Two methods of analysis are applied in order to fulfil the aim. The method of factor analysis and the method Varimax were used in order to categorize variables according to their mutual relations. The method of structural equation modelling was used to evaluate the factors and validate the model. Then, the optimal model was found. The logistic parameters, including service continuity and frequency, and service, including information rate, station proximity and vehicle cleanliness, are the factors influencing passengers´ satisfaction on a large scale.

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

Science.gov (United States)

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective

Multiple factors influence compliance with colorectal cancer staging recommendations: an exploratory study

Directory of Open Access Journals (Sweden)

Khalifa Mahmoud A

2008-02-01

Full Text Available Abstract Background For patients with colorectal cancer (CRC retrieval by surgeons, and assessment by pathologists of at least 12 lymph nodes (LNs predicts the need for adjuvant treatment and improved survival. Different interventions (educational presentation, engaging clinical opinion leaders, performance data sent to hospital executives to improve compliance with this practice had variable results. This exploratory study examined factors hypothesized to have influenced the outcome of those interventions. Methods Semi-structured interviews were conducted with 26 surgeons and pathologists at eleven hospitals. Clinicians were identified by intervention organizers, public licensing body database, and referral from interviewees. An interview guide incorporating open-ended questions was pilot-tested on one surgeon and pathologist. A single investigator conducted all interviews by phone. Transcripts were analyzed independently by two investigators using a grounded approach,ho then compared findings to resolve differences. Results Improvements in LN staging practice may have occurred largely due to educational presentations that created awareness, and self-initiated changes undertaken by pathologists. Executives that received performance data may not have shared this with staff, and opinion leaders engaged to promote compliance may not have fulfilled their roles. Barriers to change that are potentially amenable to quality improvement included perceptions about the practice (perceived lack of evidence for the need to examine at least 12 LNs and associated responsibilities (blaming other profession, technical issues (need for pathology assistants, better clearing solutions and laboratory facilities, and a lack of organizational support for multidisciplinary interaction (little communication between surgeons and pathologists or quality improvement (no change leaders or capacity for monitoring. Conclusion Use of an exploratory approach provided an in

Factors Influencing Student Nurses' Performance in the Final ...

African Journals Online (AJOL)

Factors Influencing Student Nurses' Performance in the Final Practical Examination ... Staff development courses can be held to coordinate the work of the school ... to authentic individual nursing care of patients so that they use the individual ...

Factors influencing breastfeeding practices in Edo state, Nigeria ...

African Journals Online (AJOL)

In Nigeria however, young infants may not benefit from such a practice as a ... The purpose of this study was to determine factors influencing breastfeeding practices in Edo State, Nigeria. ... Only 20 per cent practiced exclusive breastfeeding.

Factors of influence and changes in the tourism consumer behaviour

Directory of Open Access Journals (Sweden)

Fratu, D.

2011-01-01

Full Text Available Consumer behaviour is a very important aspect to be studied in every marketing activity, therefore in tourism marketing as well. Defining and identifying the factors that influence consumers help in understanding individual needs and buying processes in their whole complexity. Consumers have changed their behaviour over the last two years due to the instability of the economic environment. The author describes in this article the factors which influence consumer behaviour and also presents how it has changed over the past two years.

FACTORS INFLUENCING THE MANAGEMENT OF ADHD

OpenAIRE

S ARMAN; M SOLTANI

2003-01-01

Introduction: Attention deficit hyperactivity disorder (ADHD)is the most common psychiatric disorder among school age children. It consists of hyperactivity, inattention and impulsive behavior. The onset of the disorder is before the age of 7 years and it happens at least in two situations. It causes significant impairment in social and academic functioning. A determination of factors that influences the therapeutic response in ADHD is the aim of this study. Methods: This study is design...

The influence of family factors on delinquent adolescents in ...

African Journals Online (AJOL)

This study was carried out with the aim of finding out the influence of family factors on delinquent adolescents in secondary schools in Edo South Senatorial District of Edo State. This study ascertained the extents to which family factors such as parent child rearing style, family type and parent socio economic background ...

Modeling the factors that influence knowledge transfer in mergers and acquisitions

Institute of Scientific and Technical Information of China (English)

YU Haiyan; LIANG Zhanping

2010-01-01

This paper constructs a model on the factors that influence knowledge transfer in mergers and acquisitions (M&A) and validates it via questionnaire surveys.Using 125 valid collected questionnaires,multiple linear regression analysis and hierarchical regression analysis showed that five out of the ten factors had a positive effect on knowledge transfer effect.The ranking of factor importance,from high to low,was knowledge explicitness,relationship quality,learning intent,advanced transfer activities,and learning capability,which is fairly consistent with positive factors observed in other interorganizational knowledge transfer researches.Our results also showed that one of the control variables (size of acquired firm) had neither a direct or indirect effect on knowledge transfer in M&A.Additionally,our research found that knowledge distance and degree of M&A integration had a positive influence on knowledge transfer effect at the early stage after M&A,but had a negative influence at the late stage.Based on this research,several suggestions for knowledge transfer in M&A are proposed.

Modeling the factors that influence knowledge transfer in mergers and acquisitions

Institute of Scientific and Technical Information of China (English)

YU; Haiyan; LIANG; Zhanping

2010-01-01

This paper constructs a model on the factors that influence knowledge transfer in mergers and acquisitions(M&A)and validates it via questionnaire surveys.Using 125valid collected questionnaires,multiple linear regression analysis and hierarchical regression analysis showed that five out of the ten factors had a positive effect on knowledge transfer effect.The ranking of factor importance,from high to low,was knowledge explicitness,relationship quality,learning intent,advanced transfer activities,and learning capability,which is fairly consistent with positive factors observed in other interorganizational knowledge transfer researches.Our results also showed that one of the control variables(size of acquired firm)had neither a direct or indirect effect on knowledge transfer in M&A.Additionally,our research found that knowledge distance and degree of M&A integration had a positive influence on knowledge transfer effect at the early stage after M&A,but had a negative influence at the late stage.Based on this research,several suggestions for knowledge transfer in M&A are proposed.

A Study of Factors Influencing International Students' Choice of Higher Education Institutions

OpenAIRE

Akadu, Victor Abia

2013-01-01

This paper discusses the factors that influence international students’ choice of higher education institutions. The research conducted using the international students in the University of Nottingham (Malaysia Campus) and Monash University (Malaysia Campus) and survey questionnaires were mainly used to gather primary data for the purpose of this study. Findings from this research indicated that product and university based factors, cost factors, promotion, location and social influences all ...

Factors influencing recruitment and retention of professional nurses ...

African Journals Online (AJOL)

J. Lyn Haskins

factors influencing recruitment and retention of three categories of HPs in KwaZulu-Natal and has ...... tion, with good career opportunities which were similar in both urban and rural .... attract nurses to rural areas: A multicountry discrete choice.

Perceived factors influencing the utilization of traditional birth ...

African Journals Online (AJOL)

Perceived factors influencing the utilization of traditional birth attendants' services in ... A total of 130 questionnaires were retrieved and analyzed using statistical ... Poverty (p=0.988) and educational level (p =0.133) were not found to be ...

Factors influencing adherence to dietary guidelines: a qualitative ...

African Journals Online (AJOL)

2014-01-17

Jan 17, 2014 ... Original Research: Factors influencing adherence to dietary guidelines. 76. 2014 Volume ..... eat, because they dik (tired) of giving you special food. Then they go .... patients in this study were satisfied with the advice received ...

Factors influencing Nigerian men's decision to undergo prostate ...

African Journals Online (AJOL)

Objective: This study explores the factors that influence a group of Nigerian men's decision to go for Prostate Specific ..... older they were in the habit of regularly visiting the hospi- .... friends with prostate cancer was an important stimulus.

Evaluation of the efficacy of factors influencing on marketing SMEs

Directory of Open Access Journals (Sweden)

Mona Yaghoubi

2014-07-01

Full Text Available This paper presents an empirical investigation to study the effects of different factors influencing on marketing in small and medium enterprises (SMEs in city of Tehran, Iran. The study has been accomplished among 57 SMEs out of 70 active business units who were involved in hand made carpet. The survey uses a questionnaire originally developed by Merrilees et al. (2011 [Merrilees, B., Rundle-Thiele, S., & Lye, A. (2011. Marketing capabilities: Antecedents and implications for B2B SME performance. Industrial Marketing Management, 40(3, 368-375.] to determine the factors influencing on marketing SMEs. Using structural equation modeling, the results of survey indicate that market orientation, management capability, innovation capability and brand capability of SME's marketing performance influence on development of marketing, positively.

Influence of non-preferred foot technical training in reducing lower limbs functional asymmetry among young football players.

Science.gov (United States)

Guilherme, José; Garganta, Júlio; Graça, Amândio; Seabra, André

2015-01-01

The functional asymmetry of the lower limbs has been regarded as a relevant factor of the performance of football players. We purposed to ascertain whether a specific technical training programme for the non-preferred foot has implications in the increasing utilisation rate of the respective member during the game. Young football players (n = 71) were randomly divided into experimental group (N = 35; 14.37 ± 1.94 years) and control group (N = 36; 14.50 ± 1.81 years). The study was developed into three stages: first, assessment of the index utilisation of both limbs during the game; second, application of a technical training programme that includes the drilling of specific motor skills exclusively directed to the non-preferred foot; and third, assessment of the new rate of both limbs' utilisation after the predefined six months. The main findings were: (1) the use of the non-preferred foot increased significantly with the technical training programme in the experimental group and remained constant in the control group; (2) the use of the preferred foot decreased significantly in the experimental group and remained similar in control group. We concluded that a systematic and specific technical training for the non-preferred foot increases its use and reduces functional asymmetry in game situation, consequently improving the player's performance.

Organizational factors influencing successful primary care and public health collaboration.

Science.gov (United States)

Valaitis, Ruta; Meagher-Stewart, Donna; Martin-Misener, Ruth; Wong, Sabrina T; MacDonald, Marjorie; O'Mara, Linda

2018-06-07

Public health and primary care are distinct sectors within western health care systems. Within each sector, work is carried out in the context of organizations, for example, public health units and primary care clinics. Building on a scoping literature review, our study aimed to identify the influencing factors within these organizations that affect the ability of these health care sectors to collaborate with one another in the Canadian context. Relationships between these factors were also explored. We conducted an interpretive descriptive qualitative study involving in-depth interviews with 74 key informants from three provinces, one each in western, central and eastern Canada, and others representing national organizations, government, or associations. The sample included policy makers, managers, and direct service providers in public health and primary care. Seven major organizational influencing factors on collaboration were identified: 1) Clear Mandates, Vision, and Goals; 2) Strategic Coordination and Communication Mechanisms between Partners; 3) Formal Organizational Leaders as Collaborative Champions; 4) Collaborative Organizational Culture; 5) Optimal Use of Resources; 6) Optimal Use of Human Resources; and 7) Collaborative Approaches to Programs and Services Delivery. While each influencing factor was distinct, the many interactions among these influences are indicative of the complex nature of public health and primary care collaboration. These results can be useful for those working to set up new or maintain existing collaborations with public health and primary care which may or may not include other organizations.

FACTORS INFLUENCING YIELD SPREADS OF THE MALAYSIAN BONDS

OpenAIRE

Norliza Ahmad; Joriah Muhammad; Tajul Ariffin Masron

2009-01-01

Malaysian bond market is developing rapidly but not much is understood in terms of macroeconomic factors that could influence the yield spread of the Ringgit Malaysian denominated bonds. Based on a multifactor model, this paper examines the impact of four macroeconomic factors namely: Kuala Lumpur Composite Index (KLCI), Industry Production Index (IPI), Consumer Price Index (CPI) and interest rates (IR) on bond yield spread of the Malaysian Government Securities (MGS) and Corporate Bonds (CBs...

FACTORS INFLUENCING BRAND LOYALTY IN PROFESSIONAL SPORTS FANS

OpenAIRE

Yun-Tsan Lin; Chen-Hsien Lin

2008-01-01

Many researchers have provided comprehensive definitions for the term of brand loyalty and also examined the factors affecting brand loyalty with many empirical studies. But there is little research focusing on the brand loyalty of professional sports fans. The topic area about factors influencing brand loyalty in professional sports fans was identified because these fans bring significant financial benefits every year and stimulate economic growth in the United States. Although different con...

Research on Influencing Factors of Salespeople's Empowerment Readiness in Green Energy Enterprise

Science.gov (United States)

Dong, Yuan; Liu, Xiaohui

As market competition in green energy enterprises continues to intensify, marketing activities are enlarging and customer demand is increasingly growing and diversifying. More and more green energy enterprises have empowered their own salespeople. And managers in green energy enterprises are more concerned with the issues which employees suit to be empowered and which factors will influence employee empowerment readiness. This paper proposes the definition of salespeople's empowerment readiness, analyzes influencing factors of salespeople's empowerment readiness, discusses the effect mechanism of influencing factors of salespeople's empowerment readiness, finally, and puts forward some suggestions to enhance salespeople's empowerment readiness from the perspective of human resource management practice.

Technical and human considerations in establishing quality of supply objectives

International Nuclear Information System (INIS)

Fraser, J.C.

1989-01-01

The standard adopted for the quality of electrical supply ultimately determines the cost of the supply. Technical considerations prevent the achievement of perfect quality at any cost and high quality is gained usually only at high cost. Customer opinion ultimately determines acceptable quality and cost. However, gaining opinion data which is useful for system design is a task that must account for certain human characteristics which influence the reliability of data obtained from surveys. An overview is given of technical factors which limit the quality of supply and human nature impacts on opinion data. Power generation, generation design criteria, transmission system design criteria and subtransmission and distribution criteria for reliability of supply are discussed. Public opinion of electrical power quality is distorted by several influences. While electricity use is continuous, bills come periodically, and the time discrepancy is likely to inflate the perception of energy cost. Periods with low quality problems become expected as the norm, although to a certain degree memory of poor performance is more persistant than memory of good performance, moderating the effect. Costs customers are willing to bear to provide for improved performance are analyzed. 10 refs., 8 figs., 3 tabs

Factors influencing the density of aerobic granular sludge.

NARCIS (Netherlands)

Winkler, M.K.; Kleerebezem, R.; Strous, M.; Chandran, K.; Loosdrecht, M.C. van

2013-01-01

In the present study, the factors influencing density of granular sludge particles were evaluated. Granules consist of microbes, precipitates and of extracellular polymeric substance. The volume fractions of the bacterial layers were experimentally estimated by fluorescent in situ hybridisation

Factors Which Influence The Fish Purchasing Decision: A study on Traditional Market in Riau Mainland

Science.gov (United States)

Siswati, Latifa; Putri, Asgami

2018-05-01

The purposes of the research are to analyze and assess the factors which influence fish purchasing by the community at Tenayan Raya district Pekanbaru.Research methodology which used is survey method, especially interview and observation technique or direct supervision on the market which located at Tenayan Raya district. Determination technique of sampling location/region is done by purposive sampling. The sampling method is done by accidental sampling. Technique analysis of factors which used using the data that derived from the respondent opinion to various fish variable. The result of this research are the factors which influence fish purchasing decision done in a traditional market which located at Tenayan Raya district are product factor, price factors, social factor and individual factor. Product factor which influences fish purchasing decision as follows: the eyelets condition, the nutrition of fresh fish, the diversity of sold fish. Price factors influence the fish purchasing decision, such as: the price of fresh fish, the convincing price and the suitability price and benefits of the fresh fish. Individual factors which influence a fish purchasing decision, such as education and income levels. Social factors which influence a fish purchasing decision, such as family, colleagues and feeding habits of fish.

Generational Approach to Factors Influencing Career Choice in Accounting

Directory of Open Access Journals (Sweden)

Jony Hsiao

Full Text Available ABSTRACT This research aims to grasp which factors influence the generation Y to choose accounting as its career. A significant decline in the number of candidates willing to pursue a career as accountant has been observed abroad - USA, Australia, and Japan. However, in other countries - Brazil, Singapore, and Hong Kong - the opposite has been observed. Another issue is the decline in educational qualification of those pursuing an accounting career, contributing in a way that many talented students change their career choice. This may be explained by the fact that people tend to believe accounting is an exact science, full of calculations, boring, and not very creative, bringing an unbalance between the traits an individual should have according to the job market and those perceived by society. In order to give a contribution to literature concerning the factors that influence the generation Y in its career choice, a goal of this research was conducting an exploratory study where some hypotheses were formulated to support the discussion. We used Mannheim's Generational Theory and the literature on career choice. Data collection was carried out using a questionnaire, based on Schwartz's Portrait Value Questionnaire and Germeijs and Verschueren's Student Choice Task Inventory, adapted through focus group interview. Data were fully collected online and the sample consisted of 665 subjects. The results showed that people who chose accounting as their career were influenced by factors such as creativity, independence, challenging and dynamic environment, job security, money-making, job availability, and other significant people - friends and teachers. The subjects were not influenced by social factors, such as working with people and making contributions to society and family. They wish for more autonomy, creativity, and flexibility at work, and people still care about job security and money-making.

Factors influencing elderly women's mammography screening decisions: implications for counseling.

Science.gov (United States)

Schonberg, Mara A; McCarthy, Ellen P; York, Meghan; Davis, Roger B; Marcantonio, Edward R

2007-11-16

Although guidelines recommend that clinicians consider life expectancy before screening older women for breast cancer, many older women with limited life expectancies are screened. We aimed to identify factors important to mammography screening decisions among women aged 80 and older compared to women aged 65-79. Telephone surveys of 107 women aged 80+ and 93 women aged 65-79 randomly selected from one academic primary care practice who were able to communicate in English (60% response rate). The survey addressed the following factors in regards to older women's mammography screening decisions: perceived importance of a history of breast disease, family history of breast cancer, doctor's recommendations, habit, reassurance, previous experience, mailed reminder cards, family/friend's recommendations or experience with breast cancer, age, health, and media. The survey also assessed older women's preferred role in decision making around mammography screening. Of the 200 women, 65.5% were non-Hispanic white and 82.8% were in good to excellent health. Most (81.3%) had undergone mammography in the past 2 years. Regardless of age, older women ranked doctor's recommendations as the most important factor influencing their decision to get screened. Habit and reassurance were the next two highly ranked factors influencing older women to get screened. Among women who did not get screened, women aged 80 and older ranked age and doctor's counseling as the most influential factors and women aged 65-79 ranked a previous negative experience with mammography as the most important factor. There were no significant differences in preferred role in decision-making around mammography screening by age, however, most women in both age groups preferred to make the final decision on their own (46.6% of women aged 80+ and 50.5% of women aged 65-79). While a doctor's recommendation is the most important factor influencing elderly women's mammography screening decisions, habit and reassurance

Domain-General Factors Influencing Numerical and Arithmetic Processing

Directory of Open Access Journals (Sweden)

André Knops

2017-12-01

Full Text Available This special issue contains 18 articles that address the question how numerical processes interact with domain-general factors. We start the editorial with a discussion of how to define domain-general versus domain-specific factors and then discuss the contributions to this special issue grouped into two core numerical domains that are subject to domain-general influences (see Figure 1. The first group of contributions addresses the question how numbers interact with spatial factors. The second group of contributions is concerned with factors that determine and predict arithmetic understanding, performance and development. This special issue shows that domain-general (Table 1a as well as domain-specific (Table 1b abilities influence numerical and arithmetic performance virtually at all levels and make it clear that for the field of numerical cognition a sole focus on one or several domain-specific factors like the approximate number system or spatial-numerical associations is not sufficient. Vice versa, in most studies that included domain-general and domain-specific variables, domain-specific numerical variables predicted arithmetic performance above and beyond domain-general variables. Therefore, a sole focus on domain-general aspects such as, for example, working memory, to explain, predict and foster arithmetic learning is also not sufficient. Based on the articles in this special issue we conclude that both domain-general and domain-specific factors contribute to numerical cognition. But the how, why and when of their contribution still needs to be better understood. We hope that this special issue may be helpful to readers in constraining future theory and model building about the interplay of domain-specific and domain-general factors.

Factors influencing exacerbation-related self-management in patients with COPD: a qualitative study.

Science.gov (United States)

Korpershoek, Yjg; Vervoort, Scjm; Nijssen, Lit; Trappenburg, Jca; Schuurmans, M J

2016-01-01

In patients with COPD, self-management skills are important to reduce the impact of exacerbations. However, both detection and adequate response to exacerbations appear to be difficult for some patients. Little is known about the underlying process of exacerbation-related self-management. Therefore, the objective of this study was to identify and explain the underlying process of exacerbation-related self-management behavior. A qualitative study using semi-structured in-depth interviews was performed according to the grounded theory approach, following a cyclic process in which data collection and data analysis alternated. Fifteen patients (male n=8; age range 59-88 years) with mild to very severe COPD were recruited from primary and secondary care settings in the Netherlands, in 2015. Several patterns in exacerbation-related self-management behavior were identified, and a conceptual model describing factors influencing exacerbation-related self-management was developed. Acceptance, knowledge, experiences with exacerbations, perceived severity of symptoms and social support were important factors influencing exacerbation-related self-management. Specific factors influencing recognition of exacerbations were heterogeneity of exacerbations and habituation to symptoms. Feelings of fear, perceived influence on exacerbation course, patient beliefs, ambivalence toward treatment, trust in health care providers and self-empowerment were identified as specific factors influencing self-management actions. This study provided insight into factors influencing exacerbation-related self-management behavior in COPD patients. The conceptual model can be used as a framework for health care professionals providing self-management support. In the development of future self-management interventions, factors influencing the process of exacerbation-related self-management should be taken into account.

Franchised fast food brands: An empirical study of factors influencing growth

OpenAIRE

Christopher A. Wingrove; Boris Urban

2017-01-01

Orientation: Franchising is a popular and multifaceted business arrangement that captures a sizeable portion of the restaurant industry worldwide. Research purpose: The study empirically investigated the influence of various site location and branding factors on the growth of franchised fast food restaurant brands across the greater Gauteng region. Motivation of the study: Researching which factors influence the growth of franchised fast food restaurant brands is important for an emer...

Factors influencing endometrial thickness in postmenopausal women.

Science.gov (United States)

Hebbar, S; Chaya, V; Rai, L; Ramachandran, A

2014-07-01

Cut-off values for endometrial thickness (ET) in asymptomatic postmenopausal woman have been standardized. However, there are no comprehensive studies to document how various factors can influence the ET after the age of menopause. To study the various factors influencing the ET in postmenopausal women. This was a prospective observational study. A total of 110 postmenopausal women underwent detailed history taking, clinical examination, and transvaginal scan for uterine volume and ovarian volume. The volumes were calculated by using ellipsoid formula: Width × thickness × height × 0.523. The variation in ET with respect to the influencing factors such as age, duration of menopause, parity, body mass index (BMI), medical illness like diabetes/hypertension, drugs like tamoxifen, presence of myoma, uterine volume, ovarian volume, and serum estradiol (in selected patients) were measured. Descriptive analysis was performed using SPSS software (version 16, Chicago II, USA) to obtain mean, standard deviation (SD), 95% confidence intervals (CIs) and inter quartile ranges. Comparison of means was carried out using analysis of variance. The mean (SD) age of the patients was 55.4 (6.91) years (95% CI, 54.1, 56.7). The mean (SD) age at menopause was 47.95 (3.90) years (95% CI, 47.2, 48.7) and the mean (SD) duration of menopause was 7.27 (6.65) years (95% CI, 6.01, 8.53). The mean (SD) ET was 3.8 (2.3) mm (95% CI, 3.36, 4.23). Medical illness like diabetes and hypertension did not alter the ET. ET increased as BMI increased and it was statistically significant. The presence of myoma increased uterine volume significantly and was associated with thick endometrial stripe. Similarly, whenever the ovaries were visualized and as the ovarian volume increased, there was an increase in ET. When ET was > 4 mm (n = 37), they were offered endocel, of which 16 agreed to undergo the procedure. None were found to have endometrial cancer. This study suggests that parity, BMI, presence of

Factors Influencing Adjustment to Late-Life Divorce.

Science.gov (United States)

Wilson, Keren Brown; DeShane, Michael R.

Although the rate of divorce among older Americans has increased steadily, little attention has been paid to late life divorce. To describe the role of age and other factors which might influence adjustment to divorce in later life, data from a larger pilot study were used: 81 divorced persons over the age of 60 completed in-depth, structured…

Comparison between mixed and laminar airflow systems in operating rooms and the influence of human factors: experiences from a Swedish orthopedic center.

Science.gov (United States)

Erichsen Andersson, Annette; Petzold, Max; Bergh, Ingrid; Karlsson, Jón; Eriksson, Bengt I; Nilsson, Kerstin

2014-06-01

The importance of laminar airflow systems in operating rooms as protection from surgical site infections has been questioned. The aim of our study was to explore the differences in air contamination rates between displacement ventilation and laminar airflow systems during planned and acute orthopedic implant surgery. A second aim was to compare the influence of the number of people present, the reasons for traffic flow, and the door-opening rates between the 2 systems. Active air sampling and observations were made during 63 orthopedic implant operations. The laminar airflow system resulted in a reduction of 89% in colony forming units in comparison with the displacement system (P operating rooms offer high-quality air during surgery, with very low levels of colony forming units close to the surgical wound. The continuous maintenance of laminar air flow and other technical systems are crucial, because minor failures in complex systems like those in operating rooms can result in a detrimental effect on air quality and jeopardize the safety of patients. The technical ventilation solutions are important, but they do not guarantee clean air, because many other factors, such as the organization of the work and staff behavior, influence air cleanliness. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Factors Influencing the Willingness to Pay User Fees

OpenAIRE

Morse, George W.

2012-01-01

In this Note I explore the factors which influence the demand side of program participation, or the willingness to pay (WTP). The WTP estimates can help you determine how many people will participate in an event at each fee level.

Factors that influence on the decisions of battered women

Directory of Open Access Journals (Sweden)

Juana Robledo Martín

2008-01-01

Full Text Available Violence towards and against women consists in any kind of violation of woman’s personality, her physical integrity or her freedom of movement. Nowadays, gender-based violence is considered a state and public health problem as well as a social concerning subject.Objective: To identify the factors that influence on the decisions that battered women make.Methodology: The study population are battered women who live in Madrid province and who are being attended in the Municipal Points of the Regional Observatory against the Gender Violence.The information was collected by performing focus groups and deep interviews.Results: There are several factors which influence on the decisions that battered women make, like the existence or not of children they have to take care of, the economic dependence and the ignorance of the woman, in some cases, of the existence of this ill-treatment, but over all, we could even say beyond all these, there is one that is the most important, common and we could say it is the main axis that determine their behaviour. This factor is fear.Discussion: When attending these women we may be aware of the psychological situation they are, and we should be able to identify if the woman is asking us for help when she comes to us and try to identify and treat this factor that influences the decisions the woman we attend makes.

Factors Influencing the Effectiveness of Inventory Management in Manufacturing SMEs

Science.gov (United States)

Chan, Shiau Wei; Tasmin, R.; Nor Aziati, A. H.; Zuraidah Rasi, Raja; Ismail, Fadillah Binti; Yaw, Li Ping

2017-08-01

Effectiveness of inventory management is a vital part in the manufacturing organization to be more competitive. The previous studies have indicated that there are several factors influencing the effectiveness of inventory management in the organization but there is lack of researchers who carried out the research in the manufacturing small medium enterprise in Johor. Therefore, the purpose of this research is to identify the problem of inventory management faced by the manufacturing small medium enterprise and also to determine the factors that will influence the effectiveness of inventory management. In completing this research, 80 employees were selected randomly from the manufacturing small medium enterprise in Batu Pahat, Johor and they were requested to complete questionnaires. The result have shown that the problems of inventory management faced by manufacturing organization were underproduction, overproduction, stock out situation, delays in the delivery of raw materials and discrepancy of records. The factors, documentation/store records, planning, knowledge of employees/staff skill have shown to significantly influence the effectiveness of inventory management while the funds have shown slightly significant influence on the inventory management in manufacturing small medium enterprises. This quantitative study is important to the manufacturing organization in Malaysia because it provides the guidelines to the employers of manufacturing small medium enterprises in Batu Pahat, Johor.

Cheap Talk: “Team Factors and Management Practices Influence on Team Trust”

OpenAIRE

Doris Padmini Selvaratnam; Aini Aman; Muhamad Maziz Mahyuddin Bin Kamaludin; Gary Lynn; Richard Reilly

2016-01-01

Team trust has been cited as a contributing factor towards team performance. This paper looks at the antecedents of team trust and to what extent they influence team trust. The antecedents of team trust are team factors like team autonomy, team stability and team member experience; and the management practices are top management involvement and management support. The results demonstrated that team factors and management practices influence team trust individually. The key find...

ESTIMATION OF EXTERNAL FACTORS INFLUENCE ON THE ORGANIZATIONAL AND RESOURCE SUPPORT OF ENGINEERING

Directory of Open Access Journals (Sweden)

Yu. V. Gusak

2013-09-01

Full Text Available Purpose. The engineering industry is characterized by deep specialization and high co-operation, which suggests a high degree of interaction with other industries and the economy, highly sensitive to external factors. Effective regulation of the engineering industry’s organizational-resource support will ensure coherence of all the subsystems of the market economy, the competitive environment, a full course of the investment process and the success of the industry. Therefore there is a need for detailed estimation and analysis of the external factors’ influence on the formation and implementation indexes of the engineering industry’s organizational-resource support. Methodology. To establish the close connection between the set of external factors of formation and implementation indexes of the engineering industry organizational-resource support the correlation analysis was used, to calculate the amount of the formation and implementation indexes of the engineering industry organizational-resource support’s change under the influence of the external factors with malleability coefficient were applied. Findings. The external influence factors on the engineering industry organizational-resource support by the source of origin: industrial, economical, political, informational, and social were separated and grouped. The classification of the external factors influence on the engineering industry organizational-resource support, depending on their influence’s direction on the formation and implementation indexes of the engineering industry’s organizational-resource support was made. The connection closeness and the amount of the formation and implementation indexes of the engineering industry organizational-resource support change (the machinery index of and the sales volume machinery index under the influence of the external factors with malleability coefficient were determined. Originality. The estimation of the external factors

An exploration study on factors influencing green marketing

Directory of Open Access Journals (Sweden)

Mojtaba Esmaeeli

2013-05-01

Full Text Available These days, there have been tremendous efforts on offering products, which are environment friendly. Green marketing plays an important role for attracting new customer and customer retention. This paper presents an empirical investigation based on the implementation of factor analysis to locate important factors influencing green marketing planning and strategies. building market oriented business units. The study designs a questionnaire including 23 questions and the questionnaire was distributed among 200 people who were visiting organic product exhibition. Cronbach alpha was calculated as 0.845, which is well above the minimum acceptable limit and validates the results. The results of factor analysis reveal four major factors including green labeling, compatibility, product value and marketing component and size.

Factors influencing societal response of nanotechnology : an expert stakeholder analysis

NARCIS (Netherlands)

Gupta, N.; Fischer, A.R.H.; Lans, van der I.A.; Frewer, L.J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an

RF Regional Technical Centers for MPC and A Sustainability Operations

International Nuclear Information System (INIS)

Lambert, L D; Toth, W J; Hendrickson, S

2004-01-01

The National Nuclear Security Administration (NNSA) programmatic vision to be a catalyst in Russia's assumption of responsibility for long-term system operation is exemplified in the sustainability cooperation with the RF Ministry of Defense (MOD). An identified goal for the MPC and A Program is to encourage the development of Russian Federation (RF) capabilities and commitments to operate and maintain safeguard improvements. The RF MOD Technical Support Center development fulfills the NNSA mission and MPC and A Program goal. The regional technical center concept involves a systematic approach to aid in the determination of the level of sustainability assistance required to transition operators, maintenance, training, and testing of MPC and A systems to the RF MOD. This paper describes the process used to create the RF MOD Technical support center. First are described the needs analyses conducted to determine the key system sustainability factors requiring support. These sustainability functions are then compiled to influence the form and ultimate physical design of the technical support center. Operational interfaces are described, in detail that show the benefit of the center to the individual sites. Finally, benefits relating to information accessibility and other economies of scale are described that highlight the central center concept's strengths

INFLUENCE OF ORGANIZATIONAL AND TECHNOLOGICAL SOLUTIONS TO TECHNICAL AND ECONOMICAL INDICATORS IN PROJECT OF HEAT INSULATION FACADES

Directory of Open Access Journals (Sweden)

BABIJ I. N. Cand. Sc. (Tech., Associate Professor,

2016-09-01

Full Text Available Summary. Raising of problem. The article dedicated to the solution important problems of choosing rational technical and economic indicators of the duration and cost the process heat insulation facades of buildings by means of experimental and statistical modeling organizational and technological solutions. For this we used the results of numerical experiment, theory a shorthand experiment planning and contemporary computer programs. Purpose. We used experimentally-statistical modeling to establish the impact of organizational and technological solutions for heat insulation of facades by hinged ventilated systems on technical and economic parameters of the project, such as duration and cost. Conclusion. We investigated depending duration assembly jobs and manufacturing cost on the value and combination of variable factors experimental and statistical modeling of construction processes and results patterns of change in studied parameters.

The Factors Influencing Economic Efficiency of the Hospital Bed Care in Terms of the Regional Allowance Organizations

Directory of Open Access Journals (Sweden)

Vaňková Ivana

2014-09-01

Full Text Available This paper aims to provide an efficiency evaluation of selected hospital bed care providers during years 2010 -2012 with respect to selected factors: The size of the hospital establishment according to number of beds, number of hospitalized patients, the average length of stay per a patient in care, total staff cost calculated per bed, total revenues calculated per bed, and total costs calculated per bed. For this purpose, hospitals providing primarily acute bed care were chosen. From the legal point of view, they are allowance organizations of a particular region. The evaluation concerns both allocative efficiency and technical efficiency. The allocative efficiency is treated from the proper algorithm point of view and it compares total costs calculated per bed with total revenues calculated per bed. A method denominated Data Envelopment Analysis was applied for the calculation of the technical efficiency of units. To be more specific, it was input-oriented model with constant returns to scale (CCR. The input parameters involve the number of beds, the average length of stay and costs per day of stay. Output parameters were as follows: Bed occupancy in days and the number of hospitalized patients. The data published by the Institute of Health Information and Statistic of the Czech Republic and by ÚFIS system (the Data Base of Ministry of Finance of the Czech Republic were used as the source of data. The evaluation implies that only three hospitals were economically-effective: Silesian Hospital in Opava, Hospital Jihlava, and TGM Hospital Hodonín. The most significant factor influencing the efficiency was determined - the average length of stay.

Factors Influencing Acceptance Of Contraceptive Methods

Directory of Open Access Journals (Sweden)

Anita Gupta

1997-04-01

Full Text Available Research Problem: What are the factors influencing acceptance of contraceptive methods. Objective: To study the determinants influencing contra­ceptive acceptance. Study design: Population based cross - sectional study. Setting: Rural area of East Delhi. Participants: Married women in the reproductive age group. Sample:Stratified sampling technique was used to draw the sample. Sample Size: 328 married women of reproductive age group. Study Variables: Socio-economic status, Type of contraceptive, Family size, Male child. Outcome Variables: Acceptance of contraceptives Statistical Analysis: By proportions. Result: Prevalence of use of contraception at the time of data collection was 40.5%. Tubectomy and vasectomy were most commonly used methods. (59.4%, n - 133. Educational status of the women positively influenced the contraceptive acceptance but income did not. Desire for more children was single most important deterrent for accepting contraception. Recommendations: (i             Traditional method of contraception should be given more attention. (ii            Couplesshould be brought in the contraceptive use net at the early stage of marriage.

Influencing Factors of the Initiation Point in the Parachute-Bomb Dynamic Detonation System

Science.gov (United States)

Qizhong, Li; Ye, Wang; Zhongqi, Wang; Chunhua, Bai

2017-12-01

The parachute system has been widely applied in modern armament design, especially for the fuel-air explosives. Because detonation of fuel-air explosives occurs during flight, it is necessary to investigate the influences of the initiation point to ensure successful dynamic detonation. In fact, the initiating position exist the falling area in the fuels, due to the error of influencing factors. In this paper, the major influencing factors of initiation point were explored with airdrop and the regularity between initiation point area and factors were obtained. Based on the regularity, the volume equation of initiation point area was established to predict the range of initiation point in the fuel. The analysis results showed that the initiation point appeared area, scattered on account of the error of attitude angle, secondary initiation charge velocity, and delay time. The attitude angle was the major influencing factors on a horizontal axis. On the contrary, secondary initiation charge velocity and delay time were the major influencing factors on a horizontal axis. Overall, the geometries of initiation point area were sector coupled with the errors of the attitude angle, secondary initiation charge velocity, and delay time.

Factors Influencing New Entrant Dairy Farmer's Decision-Making Process around Technology Adoption

Science.gov (United States)

McDonald, Roberta; Heanue, Kevin; Pierce, Karina; Horan, Brendan

2016-01-01

Purpose: The aims of this paper are to (1) evaluate the main factors influencing grazing system technology adoption among new entrant (NE) dairy farmers within Europe and the Irish pasture-based dairy industry, and (2) to determine the extent to which economic factors influence decision-making around technology adoption and use among NEs to the…

Factors Influencing Choice of Inguinal Hernia Repair Technique ...

African Journals Online (AJOL)

Background: Inguinal hernia repair surgery is one of the most frequently performed surgical procedures worldwide. This study sought to highlight factors that may influence decisions concerning inguinal hernia repair techniques. Methods: This descriptive crosssectional study was carried out in September 2014 among ...

Influence of Sociodemographic Factors on Job Burnout and ...

African Journals Online (AJOL)

Influence of Sociodemographic Factors on Job Burnout and Satisfaction among ... (ii) female medical personnel showed significantly greater degree of job satisfaction than ... level of job satisfaction than older employees and, (iv) married employees found significantly more job satisfaction than their unmarried counterparts.

Understanding the Influence Career Paths Have on Community and Technical College Chief Business Officers' Satisfaction with Their Position: A Mixed Method Investigation

Science.gov (United States)

File, Carter L.

2013-01-01

This study was undertaken to understand whether a community or technical college chief business officer's career line influenced the lived experience of job satisfaction. This mixed method study was conducted in a two-phase approach using the Explanatory Design: Participant Selection Model variant. An initial quantitative survey was conducted from…

What factors facilitate regulatory competence in supervising the safety of nuclear technology?

International Nuclear Information System (INIS)

Mishar, Marina

2012-01-01

The proposed utilization of nuclear energy for electricity generation as the alternative energy source requires Atomic Energy Licensing Board (AELB), the Malaysian nuclear regulatory body taking key role in supervising the safety of the program. This study looked into factors influencing the competency of current AELB human resource as technical competency has been identified as one of the main contributors to the success of a civil nuclear power program. The four quadrant competency model developed by International Atomic Energy Agency was utilized as the required competency. A comprehensive study on 81 personnel from five states in different geographic regions of the country were carried out to investigate the impact of six factors related to competency (educational level, years of working experience, trainings attended, participation in technical committees, numbers of technical papers written and number of technical presentation presented) on four dependent measures in the areas of regulatory competency (legal basis, technical disciplines, regulatory practices and personal and interpersonal effectiveness). Multiple regression (method enter) identified factors that had significant contribution to level of competency while stepwise regression resulted in identifying predictors to enhance competencies. Results were mixed but each of the independent factors is a predictor to different competencies. This study had identified the best predictors that could significantly contribute to the enhancement of regulatory. (author)

Logistic Regression and Path Analysis Method to Analyze Factors influencing Students’ Achievement

Science.gov (United States)

Noeryanti, N.; Suryowati, K.; Setyawan, Y.; Aulia, R. R.

2018-04-01

Students' academic achievement cannot be separated from the influence of two factors namely internal and external factors. The first factors of the student (internal factors) consist of intelligence (X1), health (X2), interest (X3), and motivation of students (X4). The external factors consist of family environment (X5), school environment (X6), and society environment (X7). The objects of this research are eighth grade students of the school year 2016/2017 at SMPN 1 Jiwan Madiun sampled by using simple random sampling. Primary data are obtained by distributing questionnaires. The method used in this study is binary logistic regression analysis that aims to identify internal and external factors that affect student’s achievement and how the trends of them. Path Analysis was used to determine the factors that influence directly, indirectly or totally on student’s achievement. Based on the results of binary logistic regression, variables that affect student’s achievement are interest and motivation. And based on the results obtained by path analysis, factors that have a direct impact on student’s achievement are students’ interest (59%) and students’ motivation (27%). While the factors that have indirect influences on students’ achievement, are family environment (97%) and school environment (37).

Great Lakes water quality initiative technical support document for the procedure to determine bioaccumulation factors. Draft report

International Nuclear Information System (INIS)

1993-03-01

The purpose of the document is to provide the technical information and rationale in support of the proposed procedures to determine bioaccumulation factors. Bioaccumulation factors, together with the quantity of aquatic organisms eaten, determine the extent to which people and wildlife are exposed to chemicals through the consumption of aquatic organisms. The more bioaccumulative a pollutant is, the more important the consumption of aquatic organisms becomes as a potential source of contaminants to humans and wildlife. Bioaccumulation factors are needed to determine both human health and wildlife tier I water quality criteria and tier II values. Also, they are used to define Bioaccumulative Chemicals of Concern among the Great Lakes Initiative universe of pollutants. Bioaccumulation factors range from less than one to several million

An empirical investigation on factors influencing on brand loyalty

Directory of Open Access Journals (Sweden)

Naser Azad

2013-07-01

Full Text Available Building a competitive brand is a key success specially in banking industry. This paper presents a study to investigate important factors influencing brand loyalty among special customers in one of biggest Iranian banks in Iran. The study designs a questionnaire and distributes it among 249 regular customers who are special customers in various banks in city of Tehran, Iran. The study uses structural equation modeling to find important factors and they are ranked using TOPSIS method. In our study, Cronbach alpha has been calculated as 0.815 and there are eight influencing factors including flexibility in offering various services, building good relationship with customers, technology and processes, customers’ experiences, brand identity in continuous advertisement, organization size, customer perception on reputation of brand and customers’ tendency to build better brand loyalty. In our survey, flexibility in offering various services received the highest rank followed by building good relationship with customers.

The influence of biological and technical factors on quantitative analysis of amyloid PET: Points to consider and recommendations for controlling variability in longitudinal data.

Science.gov (United States)

Schmidt, Mark E; Chiao, Ping; Klein, Gregory; Matthews, Dawn; Thurfjell, Lennart; Cole, Patricia E; Margolin, Richard; Landau, Susan; Foster, Norman L; Mason, N Scott; De Santi, Susan; Suhy, Joyce; Koeppe, Robert A; Jagust, William

2015-09-01

In vivo imaging of amyloid burden with positron emission tomography (PET) provides a means for studying the pathophysiology of Alzheimer's and related diseases. Measurement of subtle changes in amyloid burden requires quantitative analysis of image data. Reliable quantitative analysis of amyloid PET scans acquired at multiple sites and over time requires rigorous standardization of acquisition protocols, subject management, tracer administration, image quality control, and image processing and analysis methods. We review critical points in the acquisition and analysis of amyloid PET, identify ways in which technical factors can contribute to measurement variability, and suggest methods for mitigating these sources of noise. Improved quantitative accuracy could reduce the sample size necessary to detect intervention effects when amyloid PET is used as a treatment end point and allow more reliable interpretation of change in amyloid burden and its relationship to clinical course. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Emergency Department Crowding: Factors Influencing Flow

OpenAIRE

Arkun, Alp; Briggs, William M; Patel, Sweha; Datillo, Paris A; Bove, Joseph; Birkhahn, Robert H

2010-01-01

Background: The objective of this study was to evaluate those factors, both intrinsic and extrinsic to the emergency department (ED) that influence two specific components of throughput: “door-to-doctor” time and dwell time. Methods: We used a prospective observational study design to determine the variables that played a significant role in determining ED flow. All adult patients seen or waiting to be seen in the ED were observed at 8pm (Monday-Friday) during a three-month period. V...

Determinant factors influencing efficiency of Fadama Arable crop ...

African Journals Online (AJOL)

... farm income, output, productivity and farm size and determined factors influencing Fadama farmer's efficiency. The multistage sampling technique was employed in the selection of120 Fadama farmers and their location. One hundred and twenty non-Fadama farmers were drawn using the same technique for comparison.

Interrelated factors influence of current stock market on pricing

Directory of Open Access Journals (Sweden)

Наталія Петрівна Мацелюх

2015-03-01

Full Text Available Impacts on market prices of securities are generalized. It is found that in the process of price determination and its implementation exist a system of interrelated factors of influence, which are divided into objective and subjective; internal and external; traditional and specific. It is proved that the impact of factors associated with risk pricing in financial assets

Analysis of physical training influence on the technical execution of the dismounts off the uneven bars

Directory of Open Access Journals (Sweden)

V. Potop

2018-02-01

Full Text Available Purpose: highlighting of physical training dynamics and its influence on the biomechanical characteristics of the dismounts off uneven bars executed by junior gymnasts aged 12 to 15 years. Material: a number of 8 gymnasts aged 12 to 15 participated in this research. They performed 12 dismounts off the uneven bars during the Women’s Artistic Gymnastics Junior National Championships in the all-around event and apparatus finals. The technical execution of the uneven bars dismounts was assessed by means of Physics ToolKit and Kinovea programs in accordance with the method of movement postural orientation, monitoring the key elements of sports technique. Seven tests of motricity were used in this study: 3 tests for strength-speed of lower limbs and arms, 3 tests for strength of the abdominal, back and complex muscles and 1 test of specific endurance. Results: We highlighted the level of specific physical training of junior gymnasts aged 12-15 years; the kinematic and dynamic analysis of the key elements of sports technique in terms of trajectories of body segments, angular speeds and moment of force in the dismounts off uneven bars; also, the dynamics of sports performances achieved in competitions. Conclusions: regarding the correlation of the physical training indicators with the indicators of the kinematic and dynamic characteristics of the dismounts off uneven bars consistent with the results achieved in competition, we revealed strong connections between indicators at P<0.05 and P<0.01 which confirms the influence of the physical training on the technical execution of the dismounts off uneven bars executed by junior gymnasts.

Automation bias: empirical results assessing influencing factors.

Science.gov (United States)

Goddard, Kate; Roudsari, Abdul; Wyatt, Jeremy C

2014-05-01

To investigate the rate of automation bias - the propensity of people to over rely on automated advice and the factors associated with it. Tested factors were attitudinal - trust and confidence, non-attitudinal - decision support experience and clinical experience, and environmental - task difficulty. The paradigm of simulated decision support advice within a prescribing context was used. The study employed within participant before-after design, whereby 26 UK NHS General Practitioners were shown 20 hypothetical prescribing scenarios with prevalidated correct and incorrect answers - advice was incorrect in 6 scenarios. They were asked to prescribe for each case, followed by being shown simulated advice. Participants were then asked whether they wished to change their prescription, and the post-advice prescription was recorded. Rate of overall decision switching was captured. Automation bias was measured by negative consultations - correct to incorrect prescription switching. Participants changed prescriptions in 22.5% of scenarios. The pre-advice accuracy rate of the clinicians was 50.38%, which improved to 58.27% post-advice. The CDSS improved the decision accuracy in 13.1% of prescribing cases. The rate of automation bias, as measured by decision switches from correct pre-advice, to incorrect post-advice was 5.2% of all cases - a net improvement of 8%. More immediate factors such as trust in the specific CDSS, decision confidence, and task difficulty influenced rate of decision switching. Lower clinical experience was associated with more decision switching. Age, DSS experience and trust in CDSS generally were not significantly associated with decision switching. This study adds to the literature surrounding automation bias in terms of its potential frequency and influencing factors. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Factors influencing a problem-based learning implementation: A case study of IT courses

Science.gov (United States)

Darus, Norida Muhd; Mohd, Haslina; Baharom, Fauziah; Saip, Mohamed Ali; Puteh, Nurnasran; Marzuki @ Matt, Zaharin; Husain, Mohd Zabidin; Yasin, Azman

2016-08-01

IT students must be trained to work efficiently as teamwork. One of the techniques that can be used to train them is through Problem-Based Learning (PBL) approach. The PBL implementation can be influenced by various factors depending on the ultimate goal of the study. This study is focusing on the IT students' perception of the PBL implementation. The student's perception is important to ensure the successfulness of the PBL implementation. Therefore, it is important to identify the factors that might influence the implementation of PBL of IT courses. This study aims to identify some catalyst factors that may influence the PBL implementation of IT courses. The study involved three (3) main phases: identifying PBL implementation factors, constructing a PBL model, and PBL model validation using statistical analysis. Four main factors are identified: PBL Characteristics, PBL Course Assessment, PBL Practices, and PBL Perception. Based on these four factors, a PBL model is constructed. Then, based on the proposed PBL model, four hypotheses are formulated and analyzed to validate the model. All hypotheses are significantly acceptable. The result shows that the PBL Characteristics and PBL Course Assessment factors are significantly influenced the PBL Practices and indirectly influenced the Students' Perception of the PBL Implementation for IT courses. This PBL model can assist decision makers in enhancing the PBL teaching and learning strategy for IT courses. It is also can be tested to other courses in the future.

A Survey of the Influencing Factors for International Academic Mobility of Chinese University Students

Science.gov (United States)

Cao, Chun; Zhu, Chang; Meng, Qian

2016-01-01

This research aims to understand the factors influencing international academic mobility within the Chinese higher education context. The inventory of University Students' Perceptions of Influencing Factors for International Academic Mobility was developed and tested to enquire about Chinese university students' perceptions of factors influencing…

The Apatity nuclear heating plant project: modern technical and economic issues of nuclear heat application in Russia

International Nuclear Information System (INIS)

Adamov, E.O.; Romenkov, A.A.

1998-01-01

Traditionally Russia is a country with advanced structure of centralized heat supply. Many thermal plants and heating networks need technical upgrading to improve their technical and economic efficiency. Fossil fuelled heating capacities have a negative influence on ecology, which can be seen especially in the northern regions of Russia. Furthermore, fossil fuel prices are rising in Russia. The above factors tend to intensify the need for alternative heat sources being capable of solving the problem. Nuclear heat sources may be the alternative. In this paper, the main features of a proposed NHP in the Murmansk region are summarized. (author)

A study of the factors influencing school-going students considering medical careers.

LENUS (Irish Health Repository)

McHugh, S M

2012-02-01

INTRODUCTION: Obtaining a place in an Irish medical school is extremely competitive, a situation mirrored in many other countries. We aimed to determine the factors influencing school students in deciding to study medicine in university. We further determined what level of interest exists in pursuing a surgical career after completion of medical school. METHODS: The Royal College of Surgeons in Ireland hosts an annual "Introduction to Medicine" programme for senior school children. Attendees were surveyed using a Likert scale to examine the factors influencing the group in choosing to study medicine, and pursue surgery as their ultimate career choice. RESULTS: A total of 128 completed the survey, giving a response rate of 100%. The opportunity to help others was most the most influential factors cited by students (97%). Males were significantly more likely to have an interest in a career in surgery rather than medicine (p = 0.003), and ranked "financial reward" (p = 0.036) as a more significant factors in influencing career choice than did females. CONCLUSIONS: A clear understanding of these factors influencing our students in their career choices and a strategy of recruitment based on these is imperative in order to optimize recruitment of students most suited to working as doctors.

ANALYSIS OF THE EXTERNAL FACTORS OF INFLUENCE ON INNOVATION ACTIVITY OF AN INDUSTRIAL ENTERPRISE

Directory of Open Access Journals (Sweden)

I. A. Salikov

2014-01-01

Full Text Available Summary. For successful functioning and development of the enterprise is a need to strive as possible deeper and more dynamic influence on parameters and objects OK-environmental management, primarily due to increase their innovation activity. Innovative activity of enterprises influenced by many factors. They can be classified on the factors of direct influence (micro and factors of indirect impacts (macro. Factors of direct impact of the influence on the pace and scale of development of the enterprise, on its effectiveness, because the whole spectrum of these factors acts as a limiter. Macro factors create the General conditions of existence of the enterprise in the external environment. To analyses these factors approach was used to SNW-analysis. As a result of analysis, factors of micro and macro-were classified on: stimulating, it minesweepers and dissuasive. Also studied were the degree of influence of these factors on the innovative activity of the enterprise. Reviewed rating factors hindering the development of innovation activity of industrial enterprise in Russia. In the result of which identified factors that hinder the development of innovative activity, and justified in the direction of overcoming them. It should be noted that the distinction between enabling and constraining factors is rather thin and conditional. So, the factors initially restraining innovation, at a certain point can be transformed into a stimulus for its development. Accounting for these factors, creation of necessary conditions and introduction of innovations in various aspects of the functioning of industrial enterprises will allow them to provide competitor-term benefits and sustainable development in a rapidly changing environment and the external environment.

Genetic and environmental factors influencing the Placental Growth Factor (PGF) variation in two populations

DEFF Research Database (Denmark)

Sorice, Rossella; Ruggiero, Daniela; Nutile, Teresa

2012-01-01

. However, to date, no information is available regarding the genetics of PGF variability. Furthermore, even though the effect of environmental factors (e.g.: cigarette smoking) on angiogenesis has been explored, no data on the influence of these factors on PGF levels have been reported so far. Here we have......Placental Growth Factor (PGF) is a key molecule in angiogenesis. Several studies have revealed an important role of PGF primarily in pathological conditions (e.g.: ischaemia, tumour formation, cardiovascular diseases and inflammatory processes) suggesting its use as a potential therapeutic agent...

Promoting Creative Thinking Ability Using Contextual Learning Model in Technical Drawing Achievement

Science.gov (United States)

Mursid, R.

2018-02-01

The purpose of this study is to determine whether there is influence; the differences in the results between students that learn drawing techniques taught by the Contextual Innovative Model (CIM) and taught by Direct Instructional Model (DIM), the differences in achievement among students of technical drawing that have High Creative Thinking Ability (HCTA) with Low Creative Thinking Ability (LCTA), and the interaction between the learning model with the ability to think creatively to the achievement technical drawing. Quasi-experimental research method. Results of research appoint that: the achievement of students that learned technical drawing by using CIM is higher than the students that learned technical drawing by using DIM, the achievement of students of technical drawings HCTA is higher than the achievement of students who have technical drawing LCTA, and there are interactions between the use of learning models and creative thinking abilities in influencing student achievement technical drawing.

Factors Influencing Prescribing Practices of Medical Practitioners in ...

African Journals Online (AJOL)

the currently used drugs, influence of pharmaceutical sales representatives and inadequate training and professional development [2,7]. Other factors include poor communication between health professional and patients regarding the basic information about the use of drugs. Most of the studies done in Tanzania on this ...

Factors Influencing Household Solid Waste Management in Urban ...

African Journals Online (AJOL)

The main objective of this study was to determine factors that influence household solid waste management practices in urban Nyeri Municipality. Descriptive cross- sectional ... Results from the survey showed that 26.2% of households practiced correct methods of household solid waste management. The percentage of ...

Factors Influencing Utilization of Modern Family Planning Services ...

African Journals Online (AJOL)

Factors Influencing Utilization of Modern Family Planning Services among Women of Child Bearing Age (15 - 49 years) in the University of Calabar Teaching Hospital, Calabar. ... Using accidental sampling technique, 150 women of childbearing age were selected to constitute the sample. Data were collected using a ...

Hepatitus B virus infection : factors influencing the outcome

NARCIS (Netherlands)

J. van Hattum (Jan)

1986-01-01

textabstractThis study was designed to find correlations between the various courses of disease after hepatitis B virus (HBV) infection and factors that could conceivably have influenced the course of disease. The aim of the study was to find correlations between parameters of viral replication and

Factors that influence attitudes and sexual behavior among ...

African Journals Online (AJOL)

This survey was carried out to assess attitudes and behaviour among youth within four constituencies in Oshana region, Namibia and to understand to how certain social and cultural factors inform attitudes and influence sexual behaviour among the population of young people surveyed. Using a structured questionnaire, ...

Critical Success Factors in a High School Healthcare Education Program

Science.gov (United States)

Thessin, Rebecca A.; Scully-Russ, Ellen; Lieberman, Daina S.

2017-01-01

Research has demonstrated career and technical education (CTE) programs have a strong positive influence on secondary students' behavior, attendance, academic achievement, and college persistence. Critical success factors common to career academies, small schools, and CTE programs include socio-emotional support and community, along with a culture…

The Influence of Psychological Factors in Meniere's Disease | Orji ...

African Journals Online (AJOL)

The Influence of Psychological Factors in Meniere's Disease. ... Annals of Medical and Health Sciences Research ... probably through disorders of the autonomic nervous system occasioned by the increased levels of stress‑related hormones.

Socio-economic factors influencing marketing of non-timber forest ...

African Journals Online (AJOL)

Socio-economic factors influencing marketing of non-timber forest products in ... enhance skills for product transformation, build innovative storage facilities, and ... the process of domestication and integration in traditional land-use systems.

Socio-Cultural Factors Influencing Consent For Research In Nigeria ...

African Journals Online (AJOL)

Socio-Cultural Factors Influencing Consent For Research In Nigeria: Lessons ... for Health Research Ethics in enforcing researchers' compliance with ethical standards in ... Genuine respect for human dignity requires deeper understanding of ...

Analysis of Spatial Pattern and Influencing Factors of E-Commerce

Science.gov (United States)

Zhang, Y.; Chen, J.; Zhang, S.

2017-09-01

This paper aims to study the relationship between e-commerce development and geographical characteristics using data of e-commerce, economy, Internet, express delivery and population from 2011 to 2015. Moran's I model and GWR model are applied to analyze the spatial pattern of E-commerce and its influencing factors. There is a growth trend of e-commerce from west to east, and it is obvious to see that e-commerce development has a space-time clustering, especially around the Yangtze River delta. The comprehensive factors caculated through PCA are described as fundamental social productivity, resident living standard and population sex structure. The first two factors have positive correlation with e-commerce, and the intensity of effect increases yearly. However, the influence of population sex structure on the E-commerce development is not significant. Our results suggest that the clustering of e-commerce has a downward trend and the impact of driving factors on e-commerce is observably distinct from year to year in space.

Qualitative factors in the healthcare services

Directory of Open Access Journals (Sweden)

Claudiu CICEA

2010-12-01

Full Text Available It is known that the efficiency of medical services is a broad social and economic concept, influenced by both numerical-quantitative and non-numerical-qualitative factors. The dynamic nature of technical progress and the accelerated pace of scientific discoveries in the field of health, enhances the size and complexity of economic issues related to assessing the efficiency of these social activities.

Influencing factors of embryo rescue in seedless grape

International Nuclear Information System (INIS)

Guo, X.; Chen, W.; Liu, Z.; Li, K.

2015-01-01

In this study, we investigated the impact of inoculating stage, medium type and concentration of plant growth regulators on embryo rescue effectiveness by L25(5)6 orthogonal design using selfed ovules of Venus Seedless as the testing material. The main results were as follows. The most important factor influencing ovule germination was inoculating stage. Ovule germinating rate gradually increased as inoculating being postponed. The highest germinating rate appeared when inoculation was done 55d after flowering. Other influencing factors were IBA concentration, exogenous amino acid, 6-BA concentration, GA3 concentration and medium type in descending order. The best embryo rescue result was based on Nitsch medium including 1.0 mg/L IBA, 0.1 mg/L GA3, 0.7 mg /L 6-BA and 2.0 mmol/L glutamine using ovules inoculated 55d after flowering. The highest germinating rate reached 41.25%, and a batch of seedlings was also obtained. (author)

Factors influencing physicians' knowledge sharing on web medical forums.

Science.gov (United States)

Lin, Tung Cheng; Lai, Ming Cheng; Yang, Shu Wen

2016-09-01

Web medical forums are relatively unique as knowledge-sharing platforms because physicians participate exclusively as knowledge contributors and not as knowledge recipients. Using the perspective of social exchange theory and considering both extrinsic and intrinsic motivations, this study aims to elicit the factors that significantly influence the willingness of physicians to share professional knowledge on web medical forums and develops a research model to explore the motivations that underlie physicians' knowledge-sharing attitudes. This model hypothesizes that constructs, including shared vision, reputation, altruism, and self-efficacy, positively influence these attitudes and, by extension, positively impact knowledge-sharing intention. A conventional sampling method and the direct recruitment of physicians at their outpatient clinic gathered valid data from a total of 164 physicians for analysis in the model. The empirical results support the validity of the proposed model and identified shared vision as the most significant factor of influence on knowledge-sharing attitudes, followed in descending order by knowledge-sharing self-efficacy, reputation, and altruism. © The Author(s) 2015.

Extrinsic and Intrinsic Factors Influencing Employee Motivation: Lessons from AMREF Health Africa in Kenya