WorldWideScience

Sample records for technical aspects analisis

  1. Modal analysis applied to rotor balancing: two relevant technical aspects; Analisis modal aplicado al balanceo de rotores: dos aspectos tecnicos relevantes

    Energy Technology Data Exchange (ETDEWEB)

    Aguirre Romano, Jorge E.; Preciado Delgado, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1991-12-31

    In applying the modal analysis to rotor balancing, it is frequent to find technical matters that are hardly developed in text books or that can only be deducted through a profound and complex study. For this reason, an engineer dedicated to the practice that wishes to deepen in the subject of rotor balancing, can hardly understand these matters, unless they are developed with the specific orientation that relate them with the balancing practice. In this paper two of these subjects related to the definition and recollection of modal parameters are presented: a) the fundamental form of the polar diagrams of response, that can be perfectly circular in certain cases and b) the relationship that exists among the modal forms of a rotor and the distribution of weights that must be placed to balance them in a given way. [Espanol] Al aplicar el analisis modal al balanceo de rotores, es frecuente encontrar temas tecnicos que dificilmente se desarrollan en los libros de texto, o que solo pueden deducirse mediante un estudio profundo y complejo. Por esta razon, un ingeniero dedicado a la practica que desee profundizar en el tema de balanceo de rotores, dificilmente podra comprender estos temas, a no ser que estos sean desarrollados con la orientacion especifica que los relacionen con la practica del balanceo. En este trabajo se presentan dos de esos temas relacionados con la definicion y obtencion de los parametros modales: a) la forma fundamental de los diagramas polares de respuesta, que puede ser circular perfecta en ciertos casos, y b) la relacion que existe entre las formas modales de un rotor y la distribucion de pesos que se deben colocar para balancear un modo dado.

  2. Modal analysis applied to rotor balancing: two relevant technical aspects; Analisis modal aplicado al balanceo de rotores: dos aspectos tecnicos relevantes

    Energy Technology Data Exchange (ETDEWEB)

    Aguirre Romano, Jorge E; Preciado Delgado, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1992-12-31

    In applying the modal analysis to rotor balancing, it is frequent to find technical matters that are hardly developed in text books or that can only be deducted through a profound and complex study. For this reason, an engineer dedicated to the practice that wishes to deepen in the subject of rotor balancing, can hardly understand these matters, unless they are developed with the specific orientation that relate them with the balancing practice. In this paper two of these subjects related to the definition and recollection of modal parameters are presented: a) the fundamental form of the polar diagrams of response, that can be perfectly circular in certain cases and b) the relationship that exists among the modal forms of a rotor and the distribution of weights that must be placed to balance them in a given way. [Espanol] Al aplicar el analisis modal al balanceo de rotores, es frecuente encontrar temas tecnicos que dificilmente se desarrollan en los libros de texto, o que solo pueden deducirse mediante un estudio profundo y complejo. Por esta razon, un ingeniero dedicado a la practica que desee profundizar en el tema de balanceo de rotores, dificilmente podra comprender estos temas, a no ser que estos sean desarrollados con la orientacion especifica que los relacionen con la practica del balanceo. En este trabajo se presentan dos de esos temas relacionados con la definicion y obtencion de los parametros modales: a) la forma fundamental de los diagramas polares de respuesta, que puede ser circular perfecta en ciertos casos, y b) la relacion que existe entre las formas modales de un rotor y la distribucion de pesos que se deben colocar para balancear un modo dado.

  3. Technical aspects of fuel reprocessing

    International Nuclear Information System (INIS)

    Groenier, W.S.

    1982-02-01

    The purpose of this paper is to present a brief description of fuel reprocessing and some present developments which show the reliability of nuclear energy as a long-term supply. The following topics are discussed: technical reasons for reprocessing; economic reasons for reprocessing; past experience; justification for advanced reprocessing R and D; technical aspects of current reprocessing development. The present developments are mainly directed at the reprocessing of breeder reactor fuels but there are also many applications to light-water reactor fuel reprocessing. These new developments involve totally remote operation, and maintenance. To demonstrate this advanced reprocessing concept, pilot-scale demonstration facilities are planned with commercial application occurring sometime after the year 2000

  4. Radiologic protection: technical and legal aspects

    International Nuclear Information System (INIS)

    Pinto, A.V.A.

    1987-01-01

    Radiologic units are described with the aim to decodify the technical dosimetric language. The legal aspect of radiologic protection in Brazil is reported. Information about help in case of radiation accident is presented. (M.A.C.) [pt

  5. Technical aspects of high converter reactors

    International Nuclear Information System (INIS)

    1992-02-01

    The meeting provided an opportunity to review and discuss national R and D programs, various technical aspects of and worldwide progress in the implementation of high conversion reactors. The meeting was attended by 66 participants from 18 countries and 2 international organizations. 33 papers were presented. A separate abstract was prepared for each of these papers. Refs, figs, tabs, slides and diagram

  6. Extracorporeal photopheresis: Review of technical aspects.

    Science.gov (United States)

    Arora, Satyam; Setia, Rasika

    2017-01-01

    Extracorporeal photochemotherapy (ECP) is considered as an immune modulating therapy majorly targeting the T cells of the Immune system. ECP induces an anti-inflammatory condition with tolerogenic responses without inducing a global immunosuppression state which is a typical feature of other therapeutic options such as steroids. Clinical indication of ECP has grown over time since its initial applications. Our review discusses the technical aspects of the concept of photopheresis with the available methods for its clinical applications.

  7. Technical aspects, a starting point for debate

    International Nuclear Information System (INIS)

    Iracane, D.; Chaix, P.

    2002-01-01

    What was first viewed by scientists and engineers simply as a common technical problem has now become a major social issue. The choice of a long-term solution for waste from the nuclear industry takes into consideration all aspects of the controversy, now an integral part of R and D projects. Research, development, and innovation must provide a 'constructive' way out of this type of controversy. This is the conviction that scientists and sociologists have come to after two years of cooperation. (authors)

  8. Technical aspects of pancreaticoduodenectomy and their outcomes.

    Science.gov (United States)

    Giuliano, Katherine; Ejaz, Aslam; He, Jin

    2017-12-01

    Pancreatic cancer is the fourth leading cause of cancer-related death in the Unites States and is rising in incidence. For the 15-25% of patients who do not have either metastatic or locally advanced disease, surgical resection with pancreaticoduodenectomy is the standard of care and results in improved 5-year survival of 15-25%. While mortality at high-volume centers is less than 5%, morbidity remains high at approximately 30-45%. This paper reviews technical aspects of pancreaticoduodenectomy and their outcomes. Specifically, we review technique and the outcome literature on vascular reconstruction, attempts to decrease delayed gastric emptying (DGE), including pylorus-preserving versus classic pancreaticoduodenectomy and gastrojejunostomy (GJ) technique, as well as attempts to decrease the rate of pancreatic fistula, including the use of pancreatic stents, fibrin sealant, and pancreaticojejunostomy (PJ) technique. Vascular resection and reconstruction have been associated with increased morbidity and mortality. However, the literature suggests that if it allows for an R0 resection, the survival is improved with comparable complication rates. DGE, one of the most common post-pancreaticoduodenectomy complications, has not been reliably decreased with various technical modifications of the GJ. The incidence of pancreatic fistula, one of the most morbid postoperative complications, is not definitively reduced by either the use of pancreatic stents or fibrin sealant. Additional research is needed to determine methods to further decrease rates of morbidity.

  9. LDL-Apheresis: Technical and Clinical Aspects

    Directory of Open Access Journals (Sweden)

    Rolf Bambauer

    2012-01-01

    Full Text Available The prognosis of patients suffering from severe hyperlipidemia, sometimes combined with elevated lipoprotein (a levels, and coronary heart disease refractory to diet and lipid-lowering drugs is poor. For such patients, regular treatment with low-density lipoprotein (LDL apheresis is the therapeutic option. Today, there are five different LDL-apheresis systems available: cascade filtration or lipid filtration, immunoadsorption, heparin-induced LDL precipitation, dextran sulfate LDL adsorption, and the LDL hemoperfusion. There is a strong correlation between hyperlipidemia and atherosclerosis. Besides the elimination of other risk factors, in severe hyperlipidemia therapeutic strategies should focus on a drastic reduction of serum lipoproteins. Despite maximum conventional therapy with a combination of different kinds of lipid-lowering drugs, sometimes the goal of therapy cannot be reached. Hence, in such patients, treatment with LDL-apheresis is indicated. Technical and clinical aspects of these five different LDL-apheresis methods are shown here. There were no significant differences with respect to or concerning all cholesterols, or triglycerides observed. With respect to elevated lipoprotein (a levels, however, the immunoadsorption method seems to be most effective. The different published data clearly demonstrate that treatment with LDL-apheresis in patients suffering from severe hyperlipidemia refractory to maximum conservative therapy is effective and safe in long-term application.

  10. Food irradiation. Technical and legal aspects

    International Nuclear Information System (INIS)

    Vas, K.

    1978-01-01

    This document presents a brief technical discussion on a new major technique for food preservation and points out the necessary harmonization of national regulations to give them a broader application field [fr

  11. Principles and technical aspects of PCR amplification

    National Research Council Canada - National Science Library

    Pelt-Verkuil, Elizabeth van; Belkum, Alex van; Hays, John P

    2008-01-01

    ... to illustrate any particularly important concepts or comments. Indeed, all commercial PCR biotechnology companies offer information about their products on internet sites and in online technical manuals. These online resources will be invaluable for any readers requiring more detailed PCR protocols. The authors have provided references for many PCR co...

  12. Technical and economic aspects of brown coal gasification and liquefaction

    International Nuclear Information System (INIS)

    Speich, P.

    1980-01-01

    A number of gasification and liquefaction processes for Rhenish brown coal are investigated along with the technical and economic aspects of coal beneficiation. The status of coal beneficiation and the major R + D activities are reviewed. (orig.) [de

  13. Technical aspects of 3MV particle accelerator at GGV Bilaspur

    International Nuclear Information System (INIS)

    Mallik, C.

    2013-01-01

    The accelerator at GGV, Bilaspur is a 3 MV pelletron operating is Tandem mode. The talk will describe the technical aspects of the accelerator. It will also discuss the beam aspects of the pelletron and the feasibility options with the accelerator. (author)

  14. Scientific and technical aspects of Chernobyl

    International Nuclear Information System (INIS)

    Gligalo, V.M.; Nosovs'kij, A.V.

    2002-01-01

    The collection contains the presentations and scientific articles prepared for and discussed during the Conference titled '2001: International Cooperation For Chernobyl'. The materials outline the outcomes achieved while implementing Chernobyl site scientific-technical researches and projects, as well as activities aimed at enhancing the ChNPP safety, decommissioning and radwaste management. It also highlights the issues related to transforming the Unit Shelter into an ecologically safe system, represents the results of ecological researches in the Exclusion Zone, medical effects of the 1986 accident at Chernobyl NPP, together with social and economic problems the city of Slavutich faces now due to the early ChNPP Units decommissioning, and Slavutich business development opportunities under the circumstances of Special Economic Zone 'Slavutich'

  15. [Hepatic cell transplantation. Technical and methodological aspects].

    Science.gov (United States)

    Pareja, Eugenia; Martínez, Amparo; Cortés, Miriam; Bonora, Ana; Moya, Angel; Sanjuán, Fernando; Gómez-Lechón, M José; Mir, José

    2010-03-01

    Hepatic cell transplantation consists of grafting already differentiated cells such as hepatocytes. Human hepatocytes are viable and functionally active. Liver cell transplantation is carried out by means of a 3-step method: isolation of hepatocytes from donor liver rejected for orthotopic transplantation, preparing a cell suspension for infusion and, finally, hepatocytes are implanted into the recipient. There are established protocols for the isolation of human hepatocytes from unused segments of donor livers, based on collagenase digestion of cannulated liver tissue at 37 degrees C. The hepatocytes can be used fresh or cryopreserved. Cryopreservation of isolated human hepatocytes would then be available for planned use. In cell transplant, the important aspects are: infusion route, number of cells, number of infusions and viability of the cells. The cells are infused into the patient through a catheter inserted via portal vein or splenic artery. Liver cell transplantation allows liver tissue to be used that would, otherwise, be discarded, enabling multiple patients to be treated with hepatocytes from a single tissue donor. Copyright 2009 AEC. Published by Elsevier Espana. All rights reserved.

  16. In situ leaching of uranium: Technical, environmental and economic aspects

    International Nuclear Information System (INIS)

    1989-01-01

    Within the framework of its activities in nuclear raw materials the International Atomic Energy Agency has convened a series of meetings to discuss various aspects of uranium ore processing technology, recovery of uranium from non-conventional resources and development of projects for the production of uranium concentrates including economic aspects. As part of this continuing effort to discuss and document important aspects of uranium production the IAEA convened a Technical Committee Meeting on Technical, Economic and Environmental Aspects of In-Situ Leaching. Although the use of this technique is limited by geological and economic constraints, it has a significant potential to produce uranium at competitive prices. This is especially important in the current uranium market which is mainly characterised by large inventories, excess production capability and low prices. This situation is not expected to last indefinitely but it is unlikely to change drastically in the next ten years or so. This Technical Committee Meeting was held in Vienna from 3 to 6 November 1987 with the attendance of 24 participants from 12 countries. Eight papers were presented. Technical sessions covered in-situ mining research, environmental and licensing aspects and restoration of leached orebodies; the technological status of in-situ leaching, the current status and future prospects of in-situ leaching of uranium in Member States, general aspects of planning and implementation of in-situ projects and the economics of in-situ leaching. Refs, figs and tabs

  17. IAEA technical meeting on 'Technical aspects of atomic and molecular data processing and exchange'. Summary report

    International Nuclear Information System (INIS)

    Humbert, Denis

    2004-03-01

    The proceedings of the IAEA Advisory Group Meeting on 'Technical Aspects of Atomic and Molecular Data Processing and Exchange' (17th Meeting of A+M Data Centres and ALADDIN Network), held on 6-7 October, 2003 in Vienna, Austria are briefly described. The meeting conclusions and recommendations on the priorities in A+M data compilation and evaluation, and on the technical aspects of data processing, exchange, and distribution are also presented. (author)

  18. Controlled nuclear fusion. Theoretical and technical-physical aspects

    International Nuclear Information System (INIS)

    Donne, T.; Oomens, N.

    1995-01-01

    It is stated that the realization of controlled fusion is not only a matter of solving technical problems. Also theoretical research in the field of plasma physics is required. A brief state-of-the-art is given of theoretical and technical-physical aspects of nuclear fusion. Attention is paid to magnetic confinement, the importance of theoretical research, plasma heating, plasma diagnostics, and the control of plasma transport. Throughout the article special attention is paid to the International Thermonuclear Experimental Reactor (ITER) project. 5 figs., 1 tab., 3 refs

  19. IODE Group of Experts on Technical Aspects of Data Exchange

    OpenAIRE

    2000-01-01

    During the 8th session of the IODE Group of Experts on Technical Aspects of Data Exchange reviewed the achievements made during the previous inter-sessional period. The Group also adopted a comprehensive workplan and medium-term objectives for GETADE that include: (i) develop End-To-End Data Management framework strategy and appropriate projects, products and services, based on user requirements; (ii) develop IODE Global metadata management system; (iii) develop marine XML as a mechanism to f...

  20. Technical Aspect on Procedure of Gamma-Ray Pipeline Inspection

    International Nuclear Information System (INIS)

    Rasif Mohd Zain; Ainul Mardhiah Terry; Norman Shah Dahing

    2015-01-01

    The main problems happen in industrial pipelines are deposit build-up, blockage, corrosion and erosion. These effects will give a constraint in transporting refined products to process or production points and cause a major problem in production. One of the techniques to inspect the problem is using gamma-ray pipe scans. The principle of the technique is gamma-ray absorption technique. In this paper describes on the technical aspect to perform the pipe inspection in laboratory work. (author)

  1. VIRTUAL PHILOSOPHER PROJECT: PHILOSOPHICAL, PEDAGOGICAL AND TECHNICAL ASPECTS

    Directory of Open Access Journals (Sweden)

    E. V. Kuchinov

    2017-01-01

    Full Text Available The article describes philosophical and pedagogical aspects of an idea of the ‘virtual philosopher’ project developed at creative sessions at Minin University and technically concretized during interaction with the Laboratory of Mobile Services. ‘Virtual philosopher’ is thought to deliver creative automation of routine operations; producing contingent matter for philosophical processing as well as elements of the philosophical artificial intelligence and forms of ‘artificial life’. Project implementation may lead to the creation of an unparalleled educational technology that functions on the principles of flexibility, nonlinearity, affective inclusion and gamification of the educational process. Based on specific character of problems raised, rhizomatic analysis of the philosophical communities’ requests, assessment of their technical feasibility and technical development, provisions are made on the feasibility, prospects and productivity of this project.

  2. Technical aspects of ageing for long-term operation

    International Nuclear Information System (INIS)

    2003-01-01

    The aspects of plant ageing management gained increasing attention over the last ten years. Numerous technical studies have been performed to study the impact of ageing mechanisms on the safe and reliable operation of nuclear power plants. National research activities have been initiated or are in progress to provide the technical basis for decision making processes. The long-term operation of nuclear power plants is influenced by economic considerations, the socio-economic environment including public acceptance, developments in research and the regulatory framework, the availability of technical infrastructure to maintain and service the systems, structures and components as well as qualified personnel. This document restricts itself to the technical aspects of the basis for long-term operation. Its objective is the characterisation of technical key items. Regulatory aspects are being discussed within CNRA. The light water reactor (LWR) nuclear power plants in operation are generically of pressurised water reactor (PWR) or boiling water reactor (BWR) type. The design principles of the nuclear steam supply system (NSSS) are proven in long-term operation as well as the principles being applied to the balance of plant (BOP), although a rather large variety of technical solutions do exist. The steps in the developments were tremendous in the 60's and 70's up to a power output of 1200 MWe followed by a period of further optimisation in the 80's and 90's, which raised it close to 1500 MWe. The NPPs in operation can be grouped into different generations of design in order to characterise similarities in technical principles and manufacturing standards. In the area of civil and mechanical structures and components there has been continuous development to optimise the design, the materials used as well as the manufacturing technology. The majority of these structures and components is still in use. In principle there are no major obstacles to further use of these

  3. Modelling Socio-Technical Aspects of Organisational Security

    DEFF Research Database (Denmark)

    Ivanova, Marieta Georgieva

    Identification of threats to organisations and risk assessment often take into consideration the pure technical aspects, overlooking the vulnerabilities originating from attacks on a social level, for example social engineering, and abstracting away the physical infrastructure. However, attacks...... would close this gap, however, it would also result in complicating the formal treatment and automatic identification of attacks. This dissertation shows that applying a system modelling approach to sociotechnical systems can be used for identifying attacks on organisations, which exploit various levels...... process calculus, we develop a formal analytical approach that generates attack trees from the model. The overall goal of the framework is to predict, prioritise and minimise the vulnerabilities in organisations by prohibiting the overall attack or at least increasing the difficulty and cost of fulfilling...

  4. Methodological and Technical Aspects of Power Sector Liberalisation of Latvia

    International Nuclear Information System (INIS)

    Petrov, B.; Viksna, I.; Zeltinsh, N.

    2001-01-01

    A successful liberalisation of energy markets is taking place in the Baltic countries (Estonia, Latvia, Lithuania), that is why it is important to investigate the methodological and technical aspects as well as the effect of this process upon the development of energy supply in the North European region. Energy supply to the Baltic countries is characterised by the fact that energy resources there are mainly supplied from the CIS, where there is a rather difficult prognostic energy market with sharp price fluctuations (sometimes supplies are completely cut). At the same time, by using the CIS energy resources, the development of the energy sector may significantly influence the total North European energy supplies. Energy saving measures and energy-efficient technologies in the following years will greatly influence energy market and energy consumption. This is an actual problem for such countries as Latvia, where the main part of its energy carriers is imported from neighbouring countries.(author)

  5. Technical-economic aspects of the utilization of geothermal waters

    International Nuclear Information System (INIS)

    Barbier, E.

    1989-01-01

    A brief description is given of the physico-chemical parameters characterized a hot water geothermal reservoir and of its exploitation by means of single or coupled (doublet) wells. The technical aspects of geothermal heat to the users is then discussed, beginning with corrosion of materials caused by seven main agents: oxygen, hydrogen sulphide, carbon dioxide, ammonia, hydrogen, sulphates and chlorides. A brief mention is made of scaling due to calcium carbonate, silica and calcium sulphates. The basic components of a geothermal plant for non-electric uses are then discussed: production pumps, surface pipelines, heat exchangers, heat pumps and reinjection pumps. The advantages and disadvantages of the different equipment and materials used in the geothermal sector are also presented. A list is also given of the criteria used in the energy and economic balance of a geothermal operation. (author). 24 refs, 13 figs, 2 tabs

  6. Scientific and technical aspects of yogurt fortification: A review

    Directory of Open Access Journals (Sweden)

    Hadi Hashemi Gahruie

    2015-03-01

    Full Text Available Food fortification is one of the most important processes for improvement of the nutrients quality and quantity in food. It can be a very cost effective public health intervention. Due to the high consumption rate of dairy products such as yogurt, fortification of these products will effectively reduce or prevent diseases associated with nutritional deficiencies. The aim of this investigation is to study the technical aspects involved in production of different types of fortified yogurts and their role in disease prevention and correction of deficiencies. In this paper, firstly, fortification is defined and the main reasons behind carrying out this process are presented and then yogurt production process and a variety of minerals, vitamins, and functional ingredients which are used in the process are briefly discussed.

  7. Cyclotron Development and Technical Aspects on Accelerator Based Laboratory Development

    International Nuclear Information System (INIS)

    Sunarhadijoso

    2000-01-01

    BATAN is planning to establish an accelerator-based laboratory at P3TM Yogyakarta as an effort in the development and use of accelerator technology for improving industrial performance and public welfare. This paper reviews several aspects of cyclotron technology and describes the combination of a linear accelerator - cyclotron system as an alternative to be considered in the planing of the laboratory. The progress of cyclotron technology is discussed covering three generations, i.e. conventional cyclotron, synchrocyclotron and AVF cyclotron generations. The planning should not consider the accelerator application for radioisotope production because it is established in Serpong with the existing negative ion cyclotron. The proposed facility at P3TM may comprise two linear accelerators coupled with a positive ion cyclotron of synchrocyclotron generation. In fact, the attachment of the synchrocyclotron unit is flexible and it can be installed subsequently if the higher energy particle beam, which can not be produced by the linear accelerators, is extremely needed. Some technical aspects related to ion beam application, building construction and infrastructure, human resources, and specification of function test are discussed for additional information in the implementation of the planning. (author)

  8. Key Technical Aspects Influencing the Accuracy of Tablet Subdivision.

    Science.gov (United States)

    Teixeira, Maíra T; Sá-Barreto, Lívia C L; Gratieri, Taís; Gelfuso, Guilherme M; Silva, Izabel C R; Cunha-Filho, Marcílio S S

    2017-05-01

    Tablet subdivision is a common practice used mainly for dose adjustment. The aim of this study was to investigate how the technical aspects of production as well as the method of tablets subdivision (employing a tablet splitter or a kitchen knife) influence the accuracy of this practice. Five drugs commonly used as subdivided tablets were selected. For each drug, the innovator drug product, a scored-generic and a non-scored generic were investigated totalizing fifteen drug products. Mechanical and physical tests, including image analysis, were performed. Additionally, comparisons were made between tablet subdivision method, score, shape, diluent composition and coating. Image analysis based on surface area was a useful tool as an alternative assay to evaluate the accuracy of tablet subdivision. The tablet splitter demonstrates an advantage relative to a knife as it showed better results in weight loss and friability tests. Oblong, coated and scored tablets had better results after subdivision than round, uncoated and non-scored tablets. The presence of elastic diluents such as starch and dibasic phosphate dehydrate conferred a more appropriate behaviour for the subdivision process than plastic materials such as microcrystalline cellulose and lactose. Finally, differences were observed between generics and their innovator products in all selected drugs with regard the quality control assays in divided tablet, which highlights the necessity of health regulations to consider subdivision performance at least in marketing authorization of generic products.

  9. Technical and dosimetric aspects of quality control in mammography

    International Nuclear Information System (INIS)

    Zoetelief, J.; Wit, N.J.P. de; Broerse, J.J.

    1989-01-01

    Before screening programmes using mammography are implemented, a cost benefit analysis has to be made and quality-control programme for the technical and dosimetric aspects adopted, including daily checks on film processing and total mammography procedure (radiography of a reference phantom, for which the average density, limiting value ± 0.20%, and focal charge is determined and which allows assessment of physical image quality) The installation of a MAs meter is essential for daily checks and can be used for determination of absorbed dose. Accurate determination of tube voltage (limiting value ±0.5 kV) is essential in regard to absorbed dose variations. Focal spot size should be measured rather than relying on the value specified by the manufacturer. The determination of the focal charge (mAs) value for actual radiographs of female breasts combined with a measurement of compressed breast thickness provides information on absorbed dose values for actual radiographs. An approximately 50 mm thick poly(methyl methacrylate) phantom can be used for determination of absorbed dose in mammography. (author)

  10. Some aspects of technical models within bridge management system

    Directory of Open Access Journals (Sweden)

    Grković Slobodan

    2015-01-01

    Full Text Available Bridge Management System (BMS represents a rational and systematic approach to organizing and conducting of all activities related to bridge maintenance. Main goal of BMS is helping the bridge owner to make an optimal decision with respect to bridge maintenance budget, whether it is dedicated to one bridge or to group of bridges, by securing that the decision is made on the basis of Life-Cycle Cost (LCC estimates. The structure of BMS is based on condition rating and Bridge Database (BD, Deterioration model (DM, Cost Model for evaluation of costs and Optimization Model for choosing the most rational maintenance strategy. Relationship between bridge condition rating and DM with maintenance costs within BMS is very important. Predictions regarding future intensity and rate of bridge deterioration depends on multitude of factors and it is a consequence of several simultaneous actions and deterioration processes (DP which need to be included into DMs. DMs are mostly based on modeling of physical and chemical actions and processes or they are based on statistical analysis of large number of data regarding the condition of existing bridges, or on artificial intelligence models, etc. Stochastic models based on Markov processes are applied within more advanced contemporary BMS. Due to social and economic circumstances and lack of financial resources over the last two decades in Republic of Serbia bridge maintenance was neglected and creation of BD was discontinued. The paper deliberates some aspects of technical models within BMS, with DMs being pointed out, development of BD within bridge maintenance in Republic of Serbia and it gives an overview of sophisticated BMS and current advances in this field.

  11. Technical aspects and limitations of fractional flow reserve measurement.

    Science.gov (United States)

    Jerabek, Stepan; Kovarnik, Tomas

    2018-02-27

    The only indication for coronary revascularization is elimination of ischaemia. Invasive hemodynamic methods (fractional flow reserve - FFR and instantaneous wave-free ratio (iFR) are superior to coronary angiography in detection of lesions causing myocardial ischaemia. Current European guidelines for myocardial revascularization recommend using of FFR for detection of functional assessment of lesions severity in category IA and number of these procedures increases. However, routine usage of these methods requires knowledge of technical requirements and limitations. The aim of the study is to summarise good clinical practice for FFR and iFR measurements with explanation of possible technical challenges, that are necessary for increasing of measurement accuracy. Authors describe frequent technical mistakes and malpractice during invasive assessment of lesion severity in coronary arteries.

  12. Fuel Cycle of VVER-1000: technical and economic aspects

    International Nuclear Information System (INIS)

    Kosourov, E.; Pavlov, V.; Pavlovichev, A.

    2009-01-01

    The paper contains estimations of dependences of technical and economic characteristics of VVER-1000 fuel cycle on number of charged FAs and their enrichment. In the study following restrictions were used: minimum quantity of loaded fresh FAs is equal 36 FAs, a maximum one - 78 (79) FAs and fuel enrichment is limited by value 4,95 %. The following technical and economic characteristics are discussed: cycle length, average burnup of spent fuel, specific consumption of natural uranium, specific quantity of separative work, annual production of thermal energy, fuel component of electrical energy cost, electricity generation cost. Results of estimations are presented as dependences of researched characteristics on cycle length, quantity of loaded FAs and their enrichments. The presented information allows to show tendencies and ranges of technical and economic characteristics at change of fuel cycle parameters. This information can be useful for definition of the fuel cycle parameters which satisfy the requirements of power system and exploiting organizations. (authors)

  13. Analysis methodology for economic technical feasibility studies in offshore electrical generation systems; Metodologia de analisis para estudios de factibilidad tecnica economica en sistemas de generacion electrica costa fuera

    Energy Technology Data Exchange (ETDEWEB)

    Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-07-01

    An analysis methodology followed in the development of technique-economic feasibility studies of systems of electrical generation in offshore electrical installations is presented, including the obtaining of the curves of the turbine and generator performance, the technical considerations for the formulation of the operation scenes and the calculations of the economic evaluation of a real scenario. [Spanish] Se muestra una metodologia de analisis seguida en el desarrollo de estudios de factibilidad tecnica-economica de sistemas de generacion electrica en instalaciones electricas costa fuera, incluyendo la obtencion de las curvas de comportamiento de la turbina y el generador, las consideraciones tecnicas para la formulacion de los escenarios de operacion y los calculos de la evaluacion economica de un escenario real.

  14. Environmental Aspects of the Engineering Training at Technical University

    Directory of Open Access Journals (Sweden)

    V. V. Bushueva

    2015-01-01

    Full Text Available Problem relevance. The article gives a justification for a need to train professionally competent, ecologically oriented engineers capable to create new equipment taking into account the ecological characteristics. Such approach expresses a requirement coherence to develop technical systems and technologies taking into account, both technical reliability and human and environmental safety. Today, in conditions of modern industrial production it is an important point in engineer’s activity. So to train future engineers who meet these requirements new forms and methods are to be found.Objectives. To prove that involvement of creative student’s teams in training the future ecologically oriented engineers is of importance. The organisational structure and methods of activities along with the principles of revitalizing search for engineering ideas and solutions to develop environmentally safe technical systems and technologies allow us to solve more complicated problems. This is the important characteristic in activities of creative groups. The article considers a significance of the future engineer’s responsibility in terms of environment safety. It gives "Methodical advices to analyse the operational impacts of technical systems on the human and environment" to show that there is a need in development of reliable and environment-safe technical systems.Novelty of this work is a technique for the organization and forms of student creative team’s activities. It represents a revised and updated option of a technique of the creative teams working at the industrial enterprises in France. The revised technique takes into consideration both the specifics of student's audience at technical university and the environment-oriented tasks to be solved. Efficiency of search and solution of environment-oriented engineering tasks is enhanced owing to use of revitalizing methods for the creative team’s activities, which are widely used today in student

  15. Endometrial ablation by rollerball electrocoagulation compared to uterine balloon thermal ablation. Technical and safety aspects.

    NARCIS (Netherlands)

    Zon-Rabelink, I.A.A. van; Vleugels, M.P.; Merkus, J.M.W.M.; Graaf, R.M. de

    2003-01-01

    OBJECTIVE: To compare two methods of endometrial ablation, hysteroscopic rollerball electrocoagulation (RBE) and non-hysteroscopic uterine balloon thermal (UBT) ablation (Thermachoice), regarding intra- and post-operative technical complications and safety aspects. STUDY DESIGN: A randomised

  16. Technical and legal aspects of the decommissioning of nuclear installations

    International Nuclear Information System (INIS)

    Rowden, M.A.; Fowler, S.E.

    1983-01-01

    Many of the plants licensed at the start of nuclear power programmes will require decommissioning in the 1990's and this issue should now be confronted by the nuclear industry, its regulators and governments. This paper deals with the United States programme and experience in the decommissioning of nuclear installations and describes alternative decommissioning methods including safety and financial aspects. (NEA) [fr

  17. Conceptual and technical aspects of transfection and gene delivery.

    Science.gov (United States)

    Kaestner, Lars; Scholz, Anke; Lipp, Peter

    2015-03-15

    Genetically modified animals are state of the art in biomedical research as gene therapy is a promising perspective in the attempt to cure hereditary diseases. Both approaches have in common that modified or corrected genetic information must be transferred into cells in general or into particular cell types of an organism. Here we give an overview of established and emerging methods of transfection and gene delivery and provide conceptual and technical advantages and drawbacks of their particular use. Additionally, based on a flow chart, we compiled a rough guideline to choose a gene transfer method for a particular field of application. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Technical and Economic Aspects of Low Emission Reduction in Poland

    Science.gov (United States)

    Dzikuć, M.; Łasiński, K.

    2017-12-01

    The paper presents the problem of excessive air pollution in Poland caused mainly by low emission. The emission arises in result of heating flats by means of old and energetically inefficient heating installations. In Poland and Bulgaria the inhaled air is of the worst quality out of all EU countries. The paper presents economic and technical problems related to low emission occurring during the combustion of solid fuels in local boiler houses. Furthermore, the most significant economic issues, connected with the reduction of low emission are discussed, as well as technological possibilities of efficient reduction of the amount of pollution in the atmosphere. Conclusions are presented at the end of the article.

  19. Transportation of nuclear material in France: regulatory and technical aspects

    International Nuclear Information System (INIS)

    Flory, D.; Renard, C.

    1995-01-01

    Legislative and regulatory documentation define responsibilities in the field of security and physical protection for transportation of nuclear material. Any transportation activity has to conform to an advance authorization regime delivered by the Ministry of Industry. Responsibility for physical protection of nuclear material rests with the carrier under control of the public authority. Penalties reinforce this administrative regime. Operational responsibility for management and control of transport operations has been entrusted by the ministry to the operational transport unit (Echelon Operationnel des Transports - EOT) of IPSN (Institute for Nuclear Protection and Safety). To guarantee en efficient protection of transport operations, the various following means are provided for: -specialized transport means; - devices for real time tracking of road vehicles; - administrative authorization and declaration procedures; -intervention capacities in case of sabotage... This set of technical means and administrative measures is completed by the existence of a body of inspectors who may control every step of the operations. (authors). 3 tabs

  20. Scientific and technical aspects of international cooperation in Chernobyl

    International Nuclear Information System (INIS)

    Gligalo, V.M.; Nosovs'kij, A.V.

    2001-01-01

    The collection contains the presentations and scientific articles prepared for and discussed during the Conference titled '2000: International Cooperation For Chernobyl'. The materials outline the outcomes achieved while implementing Chernobyl site scientific-technical researches and projects, as well as activities aimed at enhancing the ChNPP safety, decommissioning and radwaste management. It also highlights the issues related to transforming the Unit Shelter into an ecologically safe system, represents the results of ecological researches in the Exclusion Zone, medical effects of the 1986 accident at Chernobyl NPP, together with social and economic problems the city of Slavutich faces now due to the early ChNPP Units decommissioning, and Slavutich business development opportunities under the circumstances of Special Economic Zone 'Slavutich'

  1. Microbiological and technical aspects of anaerobic waste water purification

    International Nuclear Information System (INIS)

    Aivasidis, A.

    1994-01-01

    Anaerobic waste water purification is likely to be another example of how innovations can result from the joint use of biological and technical concepts. No matter how far the optimization of oxygen input with aerobic waste water purification advances it will still be the less a real competitor for anaerobic techniques the more polluted the waste water is. The principle of carrier fixation to avoid their washing out, too, has often been observed in nature with sessile microorganisms. With highly polluted water, anaerobic purification does not only work at no expenditure of energy but it can also make excess energy available for use in other processes. Another important argument for anaerobic methods of waste water purification is probably the clearly reduced production of excess sludge. (orig.) [de

  2. Evaluating the technical aspects of mixed waste treatment technologies

    International Nuclear Information System (INIS)

    Bagaasen, L.M.; Scott, P.A.

    1992-10-01

    This report discusses treatment of mixed wastes which is thought to be more complicated than treatment of either hazardous or radioactive wastes. In fact, the treatment itself is no more complicated: however, the regulations that define acceptability of the final waste disposal system are significantly more entangled, and sometimes in apparent conflict. This session explores the factors that influence the choice of waste treatment technologies, and expands on some of the limitations to their application. The objective of the presentation is to describe the technical factors that influence potential treatment processes and the ramifications associated with particular selections (for example, the generation of secondary waste streams). These collectively provide a framework for making informed treatment process selections

  3. Radioactive Waste Technical and Normative Aspects of its Disposal

    CERN Document Server

    Streffer, Christian; Kamp, Georg; Kröger, Wolfgang; Rehbinder, Eckard; Renn, Ortwin; Röhlig, Klaus-Jürgen

    2012-01-01

    Waste caused by the use of radioactive material in research, medicine and technologies, above all high level waste from nuclear power plants, must be disposed of safely. However, the strategies discussed for the disposal of radioactive waste as well as proposals for choosing a proper site for final waste disposal are strongly debated. An appropriate disposal must satisfy complex technical requirements and must meet stringent conditions to appropriately protect man and nature from risks of radioactivity over very long periods. Ethical, legal and social conditions must be considered as well. An interdisciplinary team of experts from relevant fields compiled the current status and developed criteria as well as strategies which meet the requirements of safety and security for present and future generations. The study also provides specific recommendations that will improve and optimize the chances for the selection of a repository site implementing the participation of stakeholders including the general public an...

  4. Technical and economical aspects of wind energy applications in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Durstewitz, M; Hoppe-Kilpper, M; Kleinkauf, W [Inst. fuer Solare Energieversorgungstechnik e.V., Kassel (Germany)

    1996-12-31

    The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO{sub 2}, SO{sub 2}, NO{sub x} etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme `250 MW Wind`. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

  5. [Technical aspects in the provision of orthopedic shoes for athletes].

    Science.gov (United States)

    Walther, M; Volkering, C; Röser, A

    2013-03-01

    From the technical point of view different groups must be distinguished in the provision of orthopedic shoes for athletes. The one group encompasses athletes who are provided with insoles in the hope of improved comfort or better performance. The other group includes athletes with diseases or injuries of the lower limbs for whom the provision of appropriate shoes and insoles makes it possible for them to participate again actively in their chosen sport. In such cases one has to differentiate between the purely physical disorder of the foot and biomechanical disorders. For the first group the correct fitting of the shoe is the most important factor whereas in the second group attempts are made to correct and/or compensate for the deficit by means of insoles and wedges as well as supporting or bedding elements. The particular challenge for all such measures is to achieve an as small as possible impairment on the sport activity or, in the ideal cases, even to support it. © Georg Thieme Verlag KG Stuttgart · New York.

  6. Technical and economical aspects of wind energy applications in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Durstewitz, M.; Hoppe-Kilpper, M.; Kleinkauf, W. [Inst. fuer Solare Energieversorgungstechnik e.V., Kassel (Germany)

    1995-12-31

    The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO{sub 2}, SO{sub 2}, NO{sub x} etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme `250 MW Wind`. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

  7. Technical and economical aspects of wind energy applications in Germany

    International Nuclear Information System (INIS)

    Durstewitz, M.; Hoppe-Kilpper, M.; Kleinkauf, W.

    1995-01-01

    The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO 2 , SO 2 , NO x etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme '250 MW Wind'. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

  8. Overview of clustered nuclear siting and its technical aspects

    International Nuclear Information System (INIS)

    Meier, P.M.

    1976-09-01

    In recent years there has been growing discussion over the ability of new siting approaches to redress the increasing problems of nuclear plant location. This debate has focused largely on three alternatives to the conventional siting of nuclear reactors; floating offshore plants; underground siting; and nuclear energy centers (NECs) consisting of up to 40 reactors at a single site, and, possibly, including fuel cycle facilities within their perimeter. Congressional interest in energy centers, especially in view of concern over the proliferation of nuclear reactors throughout the country, and with the special problems of safeguards over fuel reprocessing and the use of plutonium as a reactor fuel, resulted in a mandate to the Nuclear Regulatory Commission to make a comprehensive analysis of the energy center concept. A common finding of all of the studies of the nuclear energy center concept thus far is that there appear to be no technical considerations that would clearly preclude energy centers. With the one significant exception regarding the meteorological impacts of the concentration of heat and moisture releases to the atmosphere, engineering solutions would appear to be quite adequate to address any difficulties of environmental impact, electrical systems management, water supply or construction management, and to keep the overall physical environmental impact of an energy center not significantly different to that of an equivalent number of dispersed reactors

  9. Robotic liver surgery: technical aspects and review of the literature

    Science.gov (United States)

    Bianco, Francesco Maria; Daskalaki, Despoina; Gonzalez-Ciccarelli, Luis Fernando; Kim, Jihun; Benedetti, Enrico

    2016-01-01

    Minimally invasive surgery for liver resections has a defined role and represents an accepted alternative to open techniques for selected cases. Robotic technology can overcome some of the disadvantages of the laparoscopic technique, mainly in the most complex cases. Precise dissection and microsuturing is possible, even in narrow operative fields, allowing for a better dissection of the hepatic hilum, fine lymphadenectomy, and biliary reconstruction even with small bile ducts and easier bleeding control. This technique has the potential to allow for a greater number of major resections and difficult segmentectomies to be performed in a minimally invasive fashion. The implementation of near-infrared fluorescence with indocyanine green (ICG) also allows for a more accurate recognition of vascular and biliary anatomy. The perspectives of this kind of virtually implemented imaging are very promising and may be reflected in better outcomes. The overall data present in current literature suggests that robotic liver resections are at least comparable to both open and laparoscopic surgery in terms of perioperative and postoperative outcomes. This article provides technical details of robotic liver resections and a review of the current literature. PMID:27500143

  10. Technical aspects of the use of optical fibers for data transmission in particle physics

    International Nuclear Information System (INIS)

    Petrolo, E.

    1991-01-01

    This presentation will discuss the major technical aspects related to the use of optical fibers for data transmission in particle physics. The different possibilities of use of optical links for different experimental applications and environments will be presented with an overview of the technical problems in the use of optical transmission components, such as fibers and their radiation damage, emitters, detectors, cables, transmission systems, etc. (orig.)

  11. Aspects of the role of scientific-technical expert knowledge in administrative court procedures on licensing of large technical projects

    International Nuclear Information System (INIS)

    Wagner, H.

    1983-01-01

    On the basis of atomic energy law, the author explains some specific problems associated with the respective roles of experts (or expert bodies) and courts of law. In legal theory, it is comparatively easy to draw the line between the two functions, but in practice this delimination meets with difficulties. Finally, the author proposes to improve the definitions of the respective functions of experts (expert bodies) and courts of law in procedures dealing with permits of large technical facilities as follows: A highly qualified, independent body of experts in a technically representative composition lays down, in a binding way, the main elements of the safety standard of a specific plant or type of plant. The responsible administrative authority, after having examined all other legal conditions, grants the permit for that plant. There are no objections to such a model in the light either of aspects of constitutional law or of legal policy or constitutional policy, not are there any practical reasons against this approach. The only doubtful aspect is the present political feasibility. (orig.) [de

  12. On the technical, economical and proliferation aspects of the different enrichment techniques

    International Nuclear Information System (INIS)

    1979-05-01

    The report reviews the technical, economic and proliferation aspects of the different enrichment techniques as they are seen by the participants in WG.2. Summary descriptions, theoretical equations and diagrammatic representations are given for the major enrichment technologies. The current availability of enrichment services, the anticipated future demand, and the flexibility of the industry to meet that demand are discussed. Proliferation aspects are assessed and compared for the various technologies. Separate chapters review questions related to the long term assurance of supply and the special needs of developing countries

  13. Technical, normative and social aspects of the site selection process for radioactive waste repositories

    International Nuclear Information System (INIS)

    Branco, Otavio E.A.; Rodrigues, Paulo C.H.; Carvalho Filho, Carlos A.; Cota, Stela D.S.; Ferreira, Vinicius V.M.; Peres, Sueli S.; Hiromoto, Goro

    2009-01-01

    In force since 2001, the Federal Law 10.308 states, in article 37, that the Comissao Nacional de Energia Nuclear - CNEN should start studies for the implementation of a final radioactive waste repository, 'in the shortest timeframe technically feasible'. Nevertheless, not only technical aspects have to be taken into account to accomplish with this schedule, but, also factors of political, economic and social nature. In this paper, the importance and impact of public acceptance aspects are discussed, as well as the methodology of site selection for radioactive wastes repositories, and proposals to accommodate the emanated criteria from the existing legislation. Additionally, practical results from the international experience in the implementation of such deposits are presented. (author)

  14. Tore Supra: technical aspects and early results after one year of operation

    International Nuclear Information System (INIS)

    Gravier, R.

    1989-01-01

    After one year operation (1988 to 1989), technical aspects of component systems and equipment of Tore Supra are summarized. Particular attention is given to the operation with: supraconducting toroidal field coil system, cryogenic system, poloidal field system, in vessel equipment, first wall conditioning, pump limiter. The ergodic divertor experiments and the current drive experiment are reported. The plasma heating methods adopted in Tore Supra are presented

  15. Technical Aspects of Endobronchial Ultrasound-Guided Transbronchial Needle Aspiration: CHEST Guideline and Expert Panel Report.

    Science.gov (United States)

    Wahidi, Momen M; Herth, Felix; Yasufuku, Kazuhiro; Shepherd, Ray Wesley; Yarmus, Lonny; Chawla, Mohit; Lamb, Carla; Casey, Kenneth R; Patel, Sheena; Silvestri, Gerard A; Feller-Kopman, David J

    2016-03-01

    Endobronchial ultrasound (EBUS) was introduced in the last decade, enabling real-time guidance of transbronchial needle aspiration (TBNA) of mediastinal and hilar structures and parabronchial lung masses. The many publications produced about EBUS-TBNA have led to a better understanding of the performance characteristics of this procedure. The goal of this document was to examine the current literature on the technical aspects of EBUS-TBNA as they relate to patient, technology, and proceduralist factors to provide evidence-based and expert guidance to clinicians. Rigorous methodology has been applied to provide a trustworthy evidence-based guideline and expert panel report. A group of approved panelists developed key clinical questions by using the PICO (population, intervention, comparator, and outcome) format that addressed specific topics on the technical aspects of EBUS-TBNA. MEDLINE (via PubMed) and the Cochrane Library were systematically searched for relevant literature, which was supplemented by manual searches. References were screened for inclusion, and well-recognized document evaluation tools were used to assess the quality of included studies, to extract meaningful data, and to grade the level of evidence to support each recommendation or suggestion. Our systematic review and critical analysis of the literature on 15 PICO questions related to the technical aspects of EBUS-TBNA resulted in 12 statements: 7 evidence-based graded recommendations and 5 ungraded consensus-based statements. Three questions did not have sufficient evidence to generate a statement. Evidence on the technical aspects of EBUS-TBNA varies in strength but is satisfactory in certain areas to guide clinicians on the best conditions to perform EBUS-guided tissue sampling. Additional research is needed to enhance our knowledge regarding the optimal performance of this effective procedure. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights

  16. Maturity index on reliability: covering non-technical aspects of IEC61508 reliability certification

    International Nuclear Information System (INIS)

    Brombacher, A.C.

    1999-01-01

    One of the more recent developments in the field of reliability and safety is the realisation that these aspects are not only a function of the product itself, but also of the organisation realising this product. A second development is a trend from an often predominantly qualitative analysis towards a quantitative analysis. In contrast to the (older) DIN 0801, the (more recent) IEC61508 requires, on product level, also a quantitative analysis and, on organisational level, an assessment of the lifecycle of a product by analysing the (maturity of the) relevant business processes (DIN V VDE 0801. Grundsaetze fuer Rechner in Systemen mit Sicherheitsaufgaben, 1990; DIN V 0801. Grundlegende Sicherheitsbetrachtungen fuer MSR-Schutzeinrichtungen, 1994; DIN V VDE 0801 A1. Grundsaetze fuer Rechner in Systemen mit Sicherheitsaufgaben, Aenderung A1, 1994; IEC 61508 Functional Safety of electrical/electronic/programmable electronic safety-related systems, draft 4.0, 1997). The IEC standard 61508 covers: (i) technical aspects, both on a quantitative and a qualitative level; (ii) organisational aspects, both on aspects of maturity of business processes (quantitative) and on aspects of the definition and application of procedures (qualitative). This paper shows the necessity for an analysis on all aspects in a safety certification process, and presents an overview of the available tools and techniques for the various quadrants. As methods and tools for especially quadrant C are currently unavailable, this paper will propose a method to assess and improve the maturity of an organisation on reliability management: the maturity index on reliability (MIR)

  17. Analisi matematica

    CERN Document Server

    Canuto, Claudio

    2014-01-01

    Il presente testo intende essere di supporto ad un secondo insegnamento di Analisi Matematica in quei corsi di studio (quali ad esempio Ingegneria, Informatica, Fisica) in cui lo strumento matematico parte significativa della formazione dell'allievo. I concetti e i metodi fondamentali del calcolo differenziale ed integrale in più variabili, le serie di funzioni e le equazioni differenziali ordinarie sono presentati con l'obiettivo primario di addestrare lo studente ad un loro uso operativo, ma critico. L'impostazione didattica dell'opera ricalca quella usata nel testo parallelo di Analisi Matematica I. La modalità di presentazione degli argomenti ne permette un uso flessibile e modulare. Lo stile adottato privilegia la chiarezza e la linearità dell'esposizione. Il testo organizzato su due livelli di lettura. Uno, più essenziale, permette allo studente di cogliere i concetti indispensabili della materia, di familiarizzarsi con le relative tecniche di calcolo e di trovare le giustificazioni dei principali r...

  18. Laparoscopic resection of transverse colon cancer at splenic flexure: technical aspects and results.

    Science.gov (United States)

    Okuda, Junji; Yamamoto, Masashi; Tanaka, Keitaro; Masubuchi, Shinsuke; Uchiyama, Kazuhisa

    2016-03-01

    Laparoscopic resection of transverse colon cancer at splenic flexure is technical demanding and its efficacy remains controversial. The aim of this study was to investigate its technical aspects such as pitfalls and overcoming them, and to demonstrate the short-term and oncologic long-term outcomes. To overcome the difficulty in laparoscopic resection of transverse colon cancer at splenic flexure, we recognized the following technical tips as essential. First of all, we have to precisely identify major vessels variations feeding tumor. Secondary, anatomical dissection of mesocolon through medial approach is indispensible. Third, safe takedown of splenic flexure to fully mobilization of left hemicolon is mandatory. This cohort study analyzed 95 patients with stage II (43) and III (52) underwent resection of transverse colon cancer at splenic flexure. 61 laparoscopic surgeries (LAC) and 34 conventional open surgeries (OC) from December 1996 to December 2009 were evaluated. Short-term and oncologic long-term outcomes were recorded. Operative time was longer in LAC. However, blood loss was less, recovery of bowel function and hospital stay were shorter in LAC. There was no conversion in LAC and no significant difference in the postoperative complications. Regarding oncologic long-term outcomes, there were no significant differences between OC and LAC. Laparoscopic resection of transverse colon cancer at splenic flexure resulted in acceptable short-term and oncologic long-term outcomes. Once technical tips acquired, laparoscopic resection of transverse colon cancer at splenic flexure could be feasible as minimally invasive surgery.

  19. The remote monitoring systems LOVER and RECOVER for international safeguards technical, economic and legal aspects

    International Nuclear Information System (INIS)

    Lauppe, W.D.; Stein, G.; Rezniczek, A.; Stienen, U.

    1983-12-01

    The electronic remote monitoring systems RECOVER and LOVER were developed to comply with the IAEA's tasks concerning international nuclear materials safeguards with the aim of reducing the inspection expenditure and enhancing control effectiveness. The present study on the technical, economic and legal aspects of an application of these systems is intended to show possible implications and provide argumentation aids for discussions on the application of these systems. RECOVER and LOVER offer the possibility of establishing a direct communication path between containment and surveillance system (c/s), instruments at the site of application and a central monitoring station. The demonstration versions of both systems have shown that remote interrogation of data under safeguards-specific boundary conditions (e.g. requirement of tamper safety) will be technically feasible. (orig./HP)

  20. Technical aspects and complications of laparoscopic banding for morbid obesity--a radiological perspective

    Energy Technology Data Exchange (ETDEWEB)

    Roy-Choudhury, S.H.; Nelson, W.M.; EI Cast, J.; Zacharoulis, D.; Kirkwood, B.; Sedman, P.C.; Royston, C.M.S.; Breen, D.J. E-mail: david.breen@suht.swest.nhs.uk

    2004-03-01

    Morbid obesity is a significant clinical problem in the western world. Various surgical restrictive procedures have been described as an aid to weight reduction when conservative treatments fail. Adjustable laparoscopic gastric banding (LAPBAND) has been popularized as an effective, safe, minimally invasive, yet reversible technique for the treatment of morbid obesity. Radiological input is necessary in the follow-up of these patients and the diagnosis of complications peculiar to this type of surgery. In this review we will highlight the technical aspects of radiological follow-up and the lessons learnt over the last 5 years.

  1. Environmental-technical aspects of the operation of the accelerator at NIKHEF-K

    International Nuclear Information System (INIS)

    Post, J.C.

    1982-12-01

    This report discusses those technical aspects of the operation of the Medium Energy Accelerator at NIKHEF-K which affect the environment. The accelerator produces an electron beam with a maximum capacity of 300 kW and, as by-products, intense gamma and neutron radiations. These radiations can contaminate components of the accelerator and the direct surroundings. The electron beam can also generate ozone in the air. The accelerator produces a small quantity of radioactive waste itself and research in the chemistry department also leads to the production of radioactive waste. These wastes are stored temporarily and transported for treatment/storage elsewhere in Holland once a year. (Auth.)

  2. Technical and surgical aspects of the sphenopalatine ganglion (SPG) microstimulator insertion procedure

    DEFF Research Database (Denmark)

    Assaf, A T; Hillerup, S; Rostgaard, J

    2016-01-01

    into the pterygopalatine fossa (PPF) is presented herein. Technical aspects include detailed descriptions of the preoperative planning using computed tomography or cone beam computed tomography scans for presurgical digital microstimulator insertion into the patient-specific anatomy and intraoperative verification......), and removal (n=5). This SPG microstimulator insertion procedure has sequelae comparable to other oral cavity procedures including tooth extractions, sinus surgery, and dental implant placement. Twenty-five of 29 subjects (86%) completing a self-assessment questionnaire indicated that the surgical effects were...

  3. Using plant status data for off-site emergency management: Technical and political aspects

    International Nuclear Information System (INIS)

    Govaerts, P.

    2004-01-01

    Subsequent to the TMI and Chernobyl accidents, emergency management is investigating the possibility of taking balanced decisions on interventions as early as possible. This process relies more and more on in-plant data to assess the term of releases. The paper discusses the regulatory aspects of the communication related to the source term between the utility and the national authorities, and the authorities of a host country and neighbouring countries that may be affected. The technical aspects of the assessment process are summarised, with the emphasis on the handling of uncertainties. Notwithstanding the technical progress, the main dilemma for the decision makers remains the same. Risk management and prevention measures become more familiar to authorities. Utilities and national authorities have to get rid of complexes with respect to accidents covered by the accepted residual risk. International emergency management has to look for an organisation type ensuring the continuity of countermeasures independent of the presence of administrative borders, and with respect to national autonomies. (authors)

  4. Technical aspects of positron emission tomography/computed tomography in radiotherapy treatment planning.

    Science.gov (United States)

    Scripes, Paola G; Yaparpalvi, Ravindra

    2012-09-01

    The usage of functional data in radiation therapy (RT) treatment planning (RTP) process is currently the focus of significant technical, scientific, and clinical development. Positron emission tomography (PET) using ((18)F) fluorodeoxyglucose is being increasingly used in RT planning in recent years. Fluorodeoxyglucose is the most commonly used radiotracer for diagnosis, staging, recurrent disease detection, and monitoring of tumor response to therapy (Lung Cancer 2012;76:344-349; Lung Cancer 2009;64:301-307; J Nucl Med 2008;49:532-540; J Nucl Med 2007;48:58S-67S). All the efforts to improve both PET and computed tomography (CT) image quality and, consequently, lesion detectability have a common objective to increase the accuracy in functional imaging and thus of coregistration into RT planning systems. In radiotherapy, improvement in target localization permits reduction of tumor margins, consequently reducing volume of normal tissue irradiated. Furthermore, smaller treated target volumes create the possibility of dose escalation, leading to increased chances of tumor cure and control. This article focuses on the technical aspects of PET/CT image acquisition, fusion, usage, and impact on the physics of RTP. The authors review the basic elements of RTP, modern radiation delivery, and the technical parameters of coregistration of PET/CT into RT computerized planning systems. Copyright © 2012 Elsevier Inc. All rights reserved.

  5. Technical Aspects of Atomic and Molecular Data Processing and Exchange, 22nd Meeting of the A+M Data Centres Network. Summary Report of an IAEA Technical Meeting

    International Nuclear Information System (INIS)

    Chung, Hyun-Kyung

    2013-12-01

    This report summarizes the proceedings of the IAEA Technical Meeting on ''Technical Aspects of Atomic and Molecular Data Processing and Exchange'' (22nd Meeting of the A+M Data Centres Network) on 4-6 September 2013. Twelve participants from 8 data centres of 6 Member States attended the three-day meeting held at the IAEA Headquarters in Vienna. The report includes discussions on the data issues, meeting conclusions and recommendations and the abstracts of presentations presented in the meeting. (author)

  6. Technical, economic and institutional aspects of regional spent fuel storage facilities

    International Nuclear Information System (INIS)

    2005-11-01

    A particular challenge facing countries with small nuclear programmes is the preparation for extended interim storage and then disposal of their spent nuclear fuel. The costs and complications of providing for away-from-reactor storage facilities and/or geological repositories for relatively small amounts of spent fuel may be prohibitively high, motivating interest in regional solutions. This publication addresses the technical, economic and institutional aspects of regional spent fuel storage facilities (RSFSF) and is based on the results of a series of meetings on this topic with participants from IAEA Member States. Topics discussed include safety criteria and standards, safeguards and physical protection, fuel acceptance criteria, long term stability of systems and stored fuel, selection of site, infrastructure aspects, storage technology, licensing, operations, transport, decommissioning, as well as research and development. Furthermore the publication comprises economic, financial and institutional considerations including organizations and legal aspects followed by political and public acceptance and ethical considerations. Approaches and processes for implementation are discussed, as well as the overall benefits and risks of implementing a regional facility. It is illustrated that implementing a RSFSF facility would involve simultaneously addressing a wide range of diverse challenges. The appendix to this report tabulates the numerous issues that have been touched upon in the study. It appears, however, from the discussions that the challenges can in principle be met; the RSFSF concept is technically feasible and potentially economically viable. The technical committees producing this report did not identify any obvious institutional deficiencies that would prevent completion of such a project. Storing spent fuel in a few safe, reliable, secure facilities could enhance safeguards, physical protection and non-proliferation benefits. The committee also

  7. Technical and economic aspects of ancillary services markets in the electric power industry: an international comparison

    International Nuclear Information System (INIS)

    Raineri, R.; Rios, S.; Schiele, D.

    2006-01-01

    We present a comparative analysis of technical and economic aspects of ancillary services on the markets of England and Wales, Nordic Countries, California, Argentina, Australia and Spain, comparing the services of voltage control, frequency regulation and system restoration. All the analyzed markets rely on the existence of an administrator of ancillary services, function that leads to the figure of the system operator. Among the services analyzed, the mandatory nature of voltage control and primary frequency regulation stands out, being both the ancillary services with the higher market price and the shortest period of time requirements. In general, the recognized costs of the services correspond to investments operation, maintenance, and opportunity costs. In the provision of these ancillary services, there are no clear preferences for a particular resource allocation mechanism, where mandatory provision, auctions, competitive offers and different time length bilateral contracts are combined

  8. Technical aspects of portal technology application for e-health systems.

    Science.gov (United States)

    Kosińska, Joanna; Słowikowski, Paweł

    2004-01-01

    E-health is an emerging field on the intersection of medical information technologies, public health and business, referring to health services and information delivered or enhanced through the Internet and related technologies. Portal technology, allowing services to be accessible over the Internet is a perfect tool for providing e-health services. The use of portal technologies has had deep influence on the architecture of the whole e-health system, both regarding new subsystems and older ones which we want to integrate with the portal. Portals provide new possibilities for creating novel types of e-health applications as well. In this paper we provide a brief overview of e-health systems and portal technologies, and present many technical aspects of portal technology application for e-health systems such as the architecture of portal-based e-health systems, graphical user interfaces, access to various e-health systems' resources, personalization, security and privacy.

  9. Evaluation of percutaneous radiologic placement of peritoneal dialysis catheters: technical aspects, results, and complications

    International Nuclear Information System (INIS)

    Hong, Hyun Pyo; Oh, Joo Hyeong; Yoon, Yub; Lee, Tae Won; Ihm, Chun Gyoo

    2001-01-01

    To evaluate the technical aspects, results and complications of the percutaneous radiologic placement of peritoneal dialysis catheters. Between December 1999 and April 2001, 26 peritoneal dialysis catheters were placed percutaneously in 26 consecutive patients by interventional radiologists. The patient group consisted of 16 men and ten women with a mean age of 55 (range, 30-77) years. The results and complications arising were reviewed, and the expected patency of the catheters was determined by means of Kaplan-Meier survival analysis. The technical success rate for catheter placement was 100% (26/26 patients). Severe local bleeding occurred in one patient due to by inferior epigastric artery puncture, and was treated by compression and electronic cautery. The duration of catheter implantation ranged from 1 to 510 days and the patency rate was 416±45 days. Catheter malfunction occurred in four patients. In two, this was restored by manipulation in the intervention room, and in one, through the use of urokinase. In three patients, peritonitis occurred. Catheters were removed from four patients due to malfunction (n=2), peritonitis (n=1), and death (n=1). Percutaneous radiologic placement of a peritoneal dialysis catheter is a relatively simple procedure that reduces the complication rate and improves catheter patency

  10. Evaluation of percutaneous radiologic placement of peritoneal dialysis catheters: technical aspects, results, and complications

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Hyun Pyo; Oh, Joo Hyeong; Yoon, Yub; Lee, Tae Won; Ihm, Chun Gyoo [Kyunghee University Hospital, seoul (Korea, Republic of)

    2001-01-01

    To evaluate the technical aspects, results and complications of the percutaneous radiologic placement of peritoneal dialysis catheters. Between December 1999 and April 2001, 26 peritoneal dialysis catheters were placed percutaneously in 26 consecutive patients by interventional radiologists. The patient group consisted of 16 men and ten women with a mean age of 55 (range, 30-77) years. The results and complications arising were reviewed, and the expected patency of the catheters was determined by means of Kaplan-Meier survival analysis. The technical success rate for catheter placement was 100% (26/26 patients). Severe local bleeding occurred in one patient due to by inferior epigastric artery puncture, and was treated by compression and electronic cautery. The duration of catheter implantation ranged from 1 to 510 days and the patency rate was 416{+-}45 days. Catheter malfunction occurred in four patients. In two, this was restored by manipulation in the intervention room, and in one, through the use of urokinase. In three patients, peritonitis occurred. Catheters were removed from four patients due to malfunction (n=2), peritonitis (n=1), and death (n=1). Percutaneous radiologic placement of a peritoneal dialysis catheter is a relatively simple procedure that reduces the complication rate and improves catheter patency.

  11. 3.7. Technical and economic aspects of the application of cement concretes obtained from local minerals

    International Nuclear Information System (INIS)

    Saidov, D.Kh.

    2011-01-01

    This article is devoted to technical and economic aspects of the application of cement concretes obtained from local minerals. The following composite materials obtained from local raw materials were considered: mineral (cement, lime), inorganic (phosphates, sodium silicate), organic (phenol formaldehyde, epoxide, urea-formaldehyde, carbamide, acryl, organosilicon, furfural aniline). It was concluded that from technical and economical points of view the most effective materials were: mineral composite materials, crude shale oils and ligno sulphonates.

  12. System aspects of managing international scientific and technical as well as manufacturing economic cooperation in the nuclear power field

    International Nuclear Information System (INIS)

    Drahny, M.

    1988-01-01

    International scientific and technical cooperation in nuclear power is discussed from the angle of systems control aspects. Integration benefit and the development stages of the integration process are mainly treated. The researcher-user relations are analysed in detail in scientific and technical cooperation and its links to economic cooperation. In nuclear power within COMECON countries, the most important field of cooperation currently is the complex program of scientific and technical progress of the COMECON member countries till the year 2000, especially its third priority trend called Accelerated Development of Nuclear Power. The following new quality should be thereby provided for the participating states: the achievement of the world peak standards of technical and economic parameters; the reflection of scientific and technical and economic cooperation in a complete innovatory cycle Science-Technology-Production-Application; the achievement of direct labor relations of the participating research, development, production and end user organizations. (Z.M.). 1 fig., 16 refs

  13. Evaluation of anterior chest wall implanted port: technical aspects, results, and complications

    International Nuclear Information System (INIS)

    Jeon, Young Hwan; Oh, Joo Hyeong; Yoon, Yup; Kim, Si Young

    2000-01-01

    To evaluate the technical aspects, results and complications of patients with implanted anterior chest wall port. Between April 1997 and June 1999, a total of 63 implanted ports were placed at the anterior chest wall of 63 consecutive patients by interventional radiologists. The indications were chemotherapy in 61 patients and total parenteral nutrition in two. The peripheral portion of the subclavian vein was punctured under fluoroscopic guidance via ipsilateral peripheral vein during venography. A central venous catheter was placed in the superior vena cava, and using the subcutaneous tunneling method, a connected infusion port was implanted at the anterior chest wall. Results and complications were reviewed, and by means of Kaplan-Meier survival analysis, the expected patency of the port was determined. The technical success rate for implanted port at the anterior chest wall was 100% (63/63 patients). In two patients, hematoma and oozing were treated by compression. The duration of port implantation ranged from 12 to 855 (mean, 187) days, and the port patency rate was 305.7±47.6 days. In seven patients (completed chemotherapy (n=3D3), central venous thrombosis (n=3D3) catheter-related infection (n=3D1)), the port was removed. Catheter obstruction occurred in two patients, and in one, the use of urokinase led to successful recanalization. Sixteen patients died of an underlying malignancy, but no catheter-related death was noted. Implantation of an anterior chest wall port is a safe and useful procedure, with long patency, for patients requiring chemotherapy and long-term venous access. (author)

  14. Selective Embolization for Post-Endoscopic Sphincterotomy Bleeding: Technical Aspects and Clinical Efficacy

    Energy Technology Data Exchange (ETDEWEB)

    So, Young Ho; Choi, Young Ho [Seoul National University Boramae Medical Center, Seoul (Korea, Republic of); Chung, Jin Wook; Jae, Hwan Jun; Park, Jae Hyung [Seoul National University Hospital, Seoul (Korea, Republic of); Song, Soon Young [Hanyang University Hospital, Seoul (Korea, Republic of)

    2012-01-15

    The objective of this study was to evaluate the technical aspects and clinical efficacy of selective embolization for post-endoscopic sphincterotomy bleeding. We reviewed the records of 10 patients (3%; M:F 6:4; mean age, 63.3 years) that underwent selective embolization for post-endoscopic sphincterotomy bleeding among 344 patients who received arteriography for nonvariceal upper gastrointestinal bleeding from 2000 to 2009. We analyzed the endoscopic procedure, onset of bleeding, underlying clinical condition, angiographic findings, interventional procedure, and outcomes in these patients. Among the 12 bleeding branches, primary success of hemostasis was achieved in 10 bleeding branches (83%). Secondary success occurred in two additional bleeding branches (100%) after repeated embolization. In 10 patients, post-endoscopic sphincterotomy bleedings were detected during the endoscopic procedure (n = 2, 20%) or later (n = 8, 80%), and the delay was from one to eight days (mean, 2.9 days; {+-} 2.3). Coagulopathy was observed in three patients. Eight patients had a single bleeding branch, whereas two patients had two branches. On the selective arteriography, bleeding branches originated from the posterior pancreaticoduodenal artery (n = 8, 67%) and anterior pancreaticoduodenal artery (n = 4, 33%), respectively. Superselection was achieved in four branches and the embolization was performed with n-butyl cyanoacrylate. The eight branches were embolized by combined use of coil, n-butyl cyanoacrylate, or Gelfoam. After the last embolization, there was no rebleeding or complication related to embolization. Selective embolization is technically feasible and an effective procedure for post-endoscopic sphincterotomy bleeding. In addition, the posterior pancreaticoduodenal artery is the main origin of the causative vessels of post-endoscopic sphincterotomy bleeding.

  15. Selective Embolization for Post-Endoscopic Sphincterotomy Bleeding: Technical Aspects and Clinical Efficacy

    International Nuclear Information System (INIS)

    So, Young Ho; Choi, Young Ho; Chung, Jin Wook; Jae, Hwan Jun; Park, Jae Hyung; Song, Soon Young

    2012-01-01

    The objective of this study was to evaluate the technical aspects and clinical efficacy of selective embolization for post-endoscopic sphincterotomy bleeding. We reviewed the records of 10 patients (3%; M:F 6:4; mean age, 63.3 years) that underwent selective embolization for post-endoscopic sphincterotomy bleeding among 344 patients who received arteriography for nonvariceal upper gastrointestinal bleeding from 2000 to 2009. We analyzed the endoscopic procedure, onset of bleeding, underlying clinical condition, angiographic findings, interventional procedure, and outcomes in these patients. Among the 12 bleeding branches, primary success of hemostasis was achieved in 10 bleeding branches (83%). Secondary success occurred in two additional bleeding branches (100%) after repeated embolization. In 10 patients, post-endoscopic sphincterotomy bleedings were detected during the endoscopic procedure (n = 2, 20%) or later (n = 8, 80%), and the delay was from one to eight days (mean, 2.9 days; ± 2.3). Coagulopathy was observed in three patients. Eight patients had a single bleeding branch, whereas two patients had two branches. On the selective arteriography, bleeding branches originated from the posterior pancreaticoduodenal artery (n = 8, 67%) and anterior pancreaticoduodenal artery (n = 4, 33%), respectively. Superselection was achieved in four branches and the embolization was performed with n-butyl cyanoacrylate. The eight branches were embolized by combined use of coil, n-butyl cyanoacrylate, or Gelfoam. After the last embolization, there was no rebleeding or complication related to embolization. Selective embolization is technically feasible and an effective procedure for post-endoscopic sphincterotomy bleeding. In addition, the posterior pancreaticoduodenal artery is the main origin of the causative vessels of post-endoscopic sphincterotomy bleeding.

  16. Evaluation of anterior chest wall implanted port: technical aspects, results, and complications

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Young Hwan; Oh, Joo Hyeong; Yoon, Yup; Kim, Si Young [Kyung Hee University Hospital, Seoul (Korea, Republic of)

    2000-07-01

    To evaluate the technical aspects, results and complications of patients with implanted anterior chest wall port. Between April 1997 and June 1999, a total of 63 implanted ports were placed at the anterior chest wall of 63 consecutive patients by interventional radiologists. The indications were chemotherapy in 61 patients and total parenteral nutrition in two. The peripheral portion of the subclavian vein was punctured under fluoroscopic guidance via ipsilateral peripheral vein during venography. A central venous catheter was placed in the superior vena cava, and using the subcutaneous tunneling method, a connected infusion port was implanted at the anterior chest wall. Results and complications were reviewed, and by means of Kaplan-Meier survival analysis, the expected patency of the port was determined. The technical success rate for implanted port at the anterior chest wall was 100% (63/63 patients). In two patients, hematoma and oozing were treated by compression. The duration of port implantation ranged from 12 to 855 (mean, 187) days, and the port patency rate was 305.7{+-}47.6 days. In seven patients (completed chemotherapy (n=3D3), central venous thrombosis (n=3D3) catheter-related infection (n=3D1)), the port was removed. Catheter obstruction occurred in two patients, and in one, the use of urokinase led to successful recanalization. Sixteen patients died of an underlying malignancy, but no catheter-related death was noted. Implantation of an anterior chest wall port is a safe and useful procedure, with long patency, for patients requiring chemotherapy and long-term venous access. (author)

  17. Digital Aquifer - Integrating modeling, technical, software and policy aspects to develop a groundwater management tool

    Science.gov (United States)

    Tirupathi, S.; McKenna, S. A.; Fleming, K.; Wambua, M.; Waweru, P.; Ondula, E.

    2016-12-01

    Groundwater management has traditionally been observed as a study for long term policy measures to ensure that the water resource is sustainable. IBM Research, in association with the World Bank, extended this traditional analysis to include realtime groundwater management by building a context-aware, water rights management and permitting system. As part of this effort, one of the primary objectives was to develop a groundwater flow model that can help the policy makers with a visual overview of the current groundwater distribution. In addition, the system helps the policy makers simulate a range of scenarios and check the sustainability of the groundwater resource in a given region. The system also enables a license provider to check the effect of the introduction of a new well on the existing wells in the domain as well as the groundwater resource in general. This process simplifies how an engineer will determine if a new well should be approved. Distance to the nearest well neighbors and the maximum decreases in water levels of nearby wells are continually assessed and presented as evidence for an engineer to make the final judgment on approving the permit. The system also facilitates updated insights on the amount of groundwater left in an area and provides advice on how water fees should be structured to balance conservation and economic development goals. In this talk, we will discuss the concept of Digital Aquifer, the challenges in integrating modeling, technical and software aspects to develop a management system that helps policy makers and license providers with a robust decision making tool. We will concentrate on the groundwater model developed using the analytic element method that plays a very important role in the decision making aspects. Finally, the efficiency of this system and methodology is shown through a case study in Laguna Province, Philippines, which was done in collaboration with the National Water Resource Board, Philippines and World

  18. Technical Aspects of Atomic and Molecular Data Processing and Exchange, 21. Meeting of the A+M Data Centres Network. Summary Report of an IAEA Technical Meeting

    International Nuclear Information System (INIS)

    Chung, H.-K.

    2011-11-01

    This report summarizes the proceedings of the IAEA Technical Meeting on 'Technical Aspects of Atomic and Molecular Data Processing and Exchange' (21st Meeting of the A+M Data Centres Network) on 7-9 September 2011. Fourteen participants from 12 data centres of 7 Member States and 2 International Organizations attended the three-day meeting held at the IAEA Headquarters in Vienna. The report includes discussions on the data issues, meeting conclusions and recommendations and the abstracts of presentations presented in the meeting. (author)

  19. Technical Aspects of Atomic and Molecular Data Processing and Exchange, 21. Meeting of the A+M Data Centres Network. Summary Report of an IAEA Technical Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H.-K., E-mail: H.Chung@iaea.org [IAEA, Atomic and Molecular Data Unit, Vienna (Austria)

    2011-11-15

    This report summarizes the proceedings of the IAEA Technical Meeting on 'Technical Aspects of Atomic and Molecular Data Processing and Exchange' (21st Meeting of the A+M Data Centres Network) on 7-9 September 2011. Fourteen participants from 12 data centres of 7 Member States and 2 International Organizations attended the three-day meeting held at the IAEA Headquarters in Vienna. The report includes discussions on the data issues, meeting conclusions and recommendations and the abstracts of presentations presented in the meeting. (author)

  20. Technical aspects and recommendations for single-cell qPCR.

    Science.gov (United States)

    Ståhlberg, Anders; Kubista, Mikael

    2018-02-01

    Single cells are basic physiological and biological units that can function individually as well as in groups in tissues and organs. It is central to identify, characterize and profile single cells at molecular level to be able to distinguish different kinds, to understand their functions and determine how they interact with each other. During the last decade several technologies for single-cell profiling have been developed and used in various applications, revealing many novel findings. Quantitative PCR (qPCR) is one of the most developed methods for single-cell profiling that can be used to interrogate several analytes, including DNA, RNA and protein. Single-cell qPCR has the potential to become routine methodology but the technique is still challenging, as it involves several experimental steps and few molecules are handled. Here, we discuss technical aspects and provide recommendation for single-cell qPCR analysis. The workflow includes experimental design, sample preparation, single-cell collection, direct lysis, reverse transcription, preamplification, qPCR and data analysis. Detailed reporting and sharing of experimental details and data will promote further development and make validation studies possible. Efforts aiming to standardize single-cell qPCR open up means to move single-cell analysis from specialized research settings to standard research laboratories. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Indications and technical aspects of brachytherapy in breast conserving treatment of breast cancer

    International Nuclear Information System (INIS)

    Erik Van, Limbergen

    2003-01-01

    Improved local control rates have been demonstrated in retrospective studies as well as in randomized trials on brachytherapy with increasing doses to the tumour bed. The higher local control obtained by interstitial breast implants, as compared to external photon or electron beam boosts, have been mainly attributed to the higher doses actually delivered to the tumour bed by these implants for the same nominal dose as compared to external beam radiotherapy (RT). On the other hand, poor cosmesis has also been correlated with radiation dose to the breast skin (radiation telangiectases), and breast tissue (retraction due to fibrosis), the latter depending not only on RT dose but also on the treated boost volume. For this reason, a possible benefit of interstitial implants will only be realized when the gain in local control goes together with minimal cosmetic damage. Therefore, the ballistic advantages of interstitial implants have to be maximally exploited: i.e. the treated volume should be maximally adapted to the target volume, and additional irradiation of the breast skin by the boost technique should be avoided. This paper deals in detail with the technical aspects of breast brachytherapy that seem to be relevant for high quality outcome. (author)

  2. Technical aspects and preliminary results of the CCD camera diagnostics on Extrap T2

    International Nuclear Information System (INIS)

    Cecconello, M.; Brzozowski, J.

    1999-01-01

    During the last months of Extrap T2 operations an imaging acquisition system, based on charge-coupled devices (CCD) cameras, has been operated. CCD cameras are a standard diagnostic used in many fusion experiments: i) to obtain a direct insight of the plasma behaviour during the pulse, of the evolution of plasma-wall interactions and, eventually, of locked modes, ii) to measure local quantities such as the wall temperature and the impurity influxes, iii) to study the hydrogen recycling behaviour and iv) to estimate the poloidal and toroidal mode numbers. One of the aims of our imaging campaign was to check the utility of such diagnostic for T2. The purpose of this report is to describe the technical aspects involved in the use of such diagnostic and to briefly describe the results obtained. In this view, this report aims to be a guide to the development of a dedicated image acquisition system for Extrap T2, after the planned rebuild, by stressing the problems and limitations encountered during this campaign

  3. Technical aspects of the Space Telescope Imaging Spectrograph Repair (STIS-R)

    Science.gov (United States)

    Rinehart, S. A.; Domber, J.; Faulkner, T.; Gull, T.; Kimble, R.; Klappenberger, M.; Leckrone, D.; Niedner, M.; Proffitt, C.; Smith, H.; Woodgate, B.

    2008-07-01

    In August 2004, the Hubble Space Telescope (HST) Space Telescope Imaging Spectrograph (STIS) ceased operation due to a failure of the 5V mechanism power converter in the Side 2 Low Voltage Power Supply (LVPS2). The failure precluded movement of any STIS mechanism and, because of the earlier (2001) loss of the Side 1 electronics chain, left the instrument shuttered and in safe mode after 7.5 years of science operations. A team was assembled to analyze the fault and to determine if STIS repair (STIS-R) was feasible. The team conclusively pinpointed the Side 2 failure to the 5V mechanism converter, and began studying EVA techniques for opening STIS during Servicing Mission 4 (SM4) to replace the failed LVPS2 board. The restoration of STIS functionality via surgical repair by astronauts has by now reached a mature and final design state, and will, along with a similar repair procedure for the Advanced Camera for Surveys (ACS), represent a first for Hubble servicing. STIS-R will restore full scientific functionality of the spectrograph on Side 2, while Side 1 will remain inoperative. Because of the high degree of complementarity between STIS and the new Cosmic Origins Spectrograph (COS, to be installed during SM4)), successful repair of the older spectrograph is an important scientific objective. In this presentation, we focus on the technical aspects associated with STIS-R.

  4. Technical Aspects of Laparoscopic Distal Pancreatectomy for Benign and Malignant Disease: Review of the Literature

    Science.gov (United States)

    de Rooij, T.; Sitarz, R.; Busch, O. R.; Besselink, M. G.; Abu Hilal, M.

    2015-01-01

    Distal pancreatectomy is the standard curative treatment for symptomatic benign, premalignant, and malignant disease of the pancreatic body and tail. The most obvious benefits of a laparoscopic approach to distal pancreatectomy include earlier recovery and shorter hospital stay. Spleen-preserving distal pancreatectomy should be attempted in case of benign disease. Spleen preservation can be achieved preferably by preserving the splenic vessels (Kimura technique), but also by resecting the splenic vessels and maintaining vascularity through the short gastric vessels and left gastroepiploic artery (Warshaw technique). Several studies have suggested a higher rate of spleen preservation with laparoscopy. The radical antegrade modular pancreatosplenectomy has become mainstay for treating pancreatic cancer and can be performed laparoscopically as well. Evidence on the feasibility and safety of laparoscopic distal pancreatectomy for cancer is scarce. Despite the obvious advantages of laparoscopic surgery, postoperative morbidity remains relatively high, mainly because of the high incidence of pancreatic fistula. For decades, surgeons have tried to prevent these fistulas but to date no strategy has been confirmed to be effective in 2 consecutive randomized studies. Pragmatic multicenter studies focusing on technical aspects of laparoscopic distal pancreatectomy are lacking and should be encouraged. PMID:26240565

  5. Technical Aspects of Laparoscopic Distal Pancreatectomy for Benign and Malignant Disease: Review of the Literature

    Directory of Open Access Journals (Sweden)

    T. de Rooij

    2015-01-01

    Full Text Available Distal pancreatectomy is the standard curative treatment for symptomatic benign, premalignant, and malignant disease of the pancreatic body and tail. The most obvious benefits of a laparoscopic approach to distal pancreatectomy include earlier recovery and shorter hospital stay. Spleen-preserving distal pancreatectomy should be attempted in case of benign disease. Spleen preservation can be achieved preferably by preserving the splenic vessels (Kimura technique, but also by resecting the splenic vessels and maintaining vascularity through the short gastric vessels and left gastroepiploic artery (Warshaw technique. Several studies have suggested a higher rate of spleen preservation with laparoscopy. The radical antegrade modular pancreatosplenectomy has become mainstay for treating pancreatic cancer and can be performed laparoscopically as well. Evidence on the feasibility and safety of laparoscopic distal pancreatectomy for cancer is scarce. Despite the obvious advantages of laparoscopic surgery, postoperative morbidity remains relatively high, mainly because of the high incidence of pancreatic fistula. For decades, surgeons have tried to prevent these fistulas but to date no strategy has been confirmed to be effective in 2 consecutive randomized studies. Pragmatic multicenter studies focusing on technical aspects of laparoscopic distal pancreatectomy are lacking and should be encouraged.

  6. methodological and technical aspects to be considered in the location of physical recreational sports facilities

    Directory of Open Access Journals (Sweden)

    Jesús I. Benítez Llanes

    2012-03-01

    Full Text Available Sometimes we wonder. Why practitioners of recreational physical activities do not make systematic use of a particular sports facility ?, Why some sports facility remains almost always empty? Why it is continued unnecessarily reversed large sums of material resources for maintenance? For the simple reason that sports facilities were from the beginning that were not well conceived and designed architecturally, where among other things, not sporting habits and population size of the place properly examined. Similarly, we have witnessed criteria issued regarding the performance of a specific sports field, far from contributing to the extension and improvement of the practice of recreational physical and sports activities in its various manifestations, its null or poor continuous maintenance contributing negatively to limit the sporting life and lacerate mental and physical welfare of the inhabitants of the environment. Justifications that led the author of this research to the development of methodological technical aspects regarding the location of recreational physical sports infrastructure, content which also form part of the subject and / or curricular unit "Spaces and Sports Facilities" currently teaches future professionals and managers of Physical Culture for the last two academic years at the University of the Sciences of Physical Culture and Sport Nancy Uranga Romagoza in Pinar del Río Cuba and the Iberoamerican University of Sport in Venezuela.

  7. Post-2012 climate change agreement - Fitting commitments by cities. Political, economic, technical and legal aspects

    International Nuclear Information System (INIS)

    Lefevre, B.; Wemaere, M.

    2009-01-01

    There is a growing awareness of the crucial role that urban territories must and can play in reducing greenhouse gas emissions, along with a growing power of a lobby dedicated to supporting the voices of urban territories vis-a-vis national states. The local level of organization and policy is relevant for two main reasons: density and spatial organization are key factors that influence energy consumption in transport and building; some of the major potentials for emission abatement need local coordination to overcome transaction costs. 'Engage, Empower and Resource': this formula, forged during the C40 Seoul Summit (May 2009), calls for clear and quantified commitments with a timetable for delivery; additional power and competencies for cities to increase their capacity to act; and substantial financial resources. Road-Map: This paper identifies key elements that need to be taken into account when developing a road-map that seeks empowerment of local governments in the UN post-2012 framework. It explores political, economic, technical and legal aspects, along with respective main issues to be addressed. (authors)

  8. Laparoscopic left lateral sectionectomy with the use of Habib 4X: technical aspects.

    Science.gov (United States)

    Zacharoulis, Dimitris; Sioka, Eleni; Tzovaras, George; Jiao, Long R; Habib, Nagy

    2013-06-01

    Various techniques and energy-based devices have been used to minimize the blood loss during transection of the liver parenchyma laparoscopically. The laparoscopic Habib™ 4X sealer (Rita Medical Systems, Inc., Fremont, CA) is a promising device using bipolar radiofrequency energy. The purpose of the study was to test the safety and the efficiency of the device in laparoscopic left lateral sectionectomy. Five patients underwent laparoscopic left lateral sectionectomy using the laparoscopic Habib 4X in a period of 12 months. Indications for liver resection were hepatocellular carcinoma in 2 cirrhotic patients and colorectal cancer liver metastasis in 3 patients. Technical aspects were analyzed. All the patients underwent formal laparoscopic left lateral sectionectomy. The Pringle maneuver was not applied in any of the patients. Mean operative time was 75 minutes (range, 60-90 minutes). Bleeding control along the transection line was satisfactory. No conversion to laparotomy was required. Operative blood loss was minimal. No blood transfusion was recorded. The postoperative period was uneventful. Median hospital stay was 3 days (range, 2-5 days). Histopathology revealed that the margins were disease free. Laparoscopic left lateral segmentectomy with the use of Habib 4X proved safe and efficient. This technique may be an initial step for surgeons shifting to laparoscopic liver surgery provided they have previous experience in laparoscopic and liver surgery. Well-designed controlled randomized studies are needed in order to evaluate further the role of the device used in the present study in minimally invasive liver surgery.

  9. Quality control for the mammography screening program in Serbia: Physical and technical aspects

    International Nuclear Information System (INIS)

    Ciraj-Bjelac, O.; Bozovic, P.; Lazarevic, D.; Arandjic, D.; Kosutic, D.

    2012-01-01

    Breast cancer is the major cause of mortality among female population in Serbia. It is presumed that the introduction of screening programme will reduce mortality and therefore, 47 new mammography units were installed for the purpose of population-based screening program in 2011. In parallel, Quality assurance and Quality control (QC) in mammography has received increasing attention as an essential element of the successful breast cancer campaign that is for the first time initialed in Serbia. The purpose of this study is to investigate the need for and the possible implementation of the comprehensive QC programme for the mammography screening in Serbia, with special focus on physical and technical aspect. In the first phase, a QC protocols containing list of parameters, methodology, frequency of tests and reference values for screen-film, computed radiography and full-filed digital mammography) units, were developed. The second phase is focused on the initial implementation of these protocols. The paper presents results of tests of the selected parameters in 35 mammography units, with special emphasis on patient dose and image quality descriptors. After initial implementation at the beginning of the population based breast cancer screening campaign, it is essential to establish system of regular and periodic QC equipment monitoring and to ensure high quality mammograms with minimal possible radiation dose to population included in the screening. (authors)

  10. Laparoscopic Navigated Liver Resection: Technical Aspects and Clinical Practice in Benign Liver Tumors

    Directory of Open Access Journals (Sweden)

    Markus Kleemann

    2012-01-01

    Full Text Available Laparoscopic liver resection has been performed mostly in centers with an extended expertise in both hepatobiliary and laparoscopic surgery and only in highly selected patients. In order to overcome the obstacles of this technique through improved intraoperative visualization we developed a laparoscopic navigation system (LapAssistent to register pre-operatively reconstructed three-dimensional CT or MRI scans within the intra-operative field. After experimental development of the navigation system, we commenced with the clinical use of navigation-assisted laparoscopic liver surgery in January 2010. In this paper we report the technical aspects of the navigation system and the clinical use in one patient with a large benign adenoma. Preoperative planning data were calculated by Fraunhofer MeVis Bremen, Germany. After calibration of the system including camera, laparoscopic instruments, and the intraoperative ultrasound scanner we registered the surface of the liver. Applying the navigated ultrasound the preoperatively planned resection plane was then overlain with the patient's liver. The laparoscopic navigation system could be used under sterile conditions and it was possible to register and visualize the preoperatively planned resection plane. These first results now have to be validated and certified in a larger patient collective. A nationwide prospective multicenter study (ProNavic I has been conducted and launched.

  11. THE PRODUCTION OF ORANGE PRESS LIQUOR SPIRIT: TECHNICAL AND ECONOMIC ASPECTS

    Directory of Open Access Journals (Sweden)

    J. O. FERREIRA

    2008-10-01

    Full Text Available

    The orange juice industry produces, at the end of the residue extraction, a by-product called orange press liquor. Considering its high content of soluble solids and the large volume of the liquor produced in Brazilian orange juice plants, an earlier study was conducted on the technical viability of using orange press liquor as raw material for a new distilled beverage, with promising results. With a view to increasing efficiency and possibly attracting investments in the growing international market for new and exotic beverages, the aim of the present study was to optimize the orange press liquor spirit process and to evaluate the economic aspects of its production. The results showed that this process can yield a good quality beverage, comparable to the sugar cane spirit cachaça and other similar products, as well as having economic advantages and potential for immediate further growth, without extra investment costs.

  12. Technical and economic aspects of purification strategies to minimise discharge water from companies with closed soilless cultivation systems

    NARCIS (Netherlands)

    Os, E.A. van; Bruins, M.; Beerling, E.; Jurgens, R.; Appelman, W.; Enthoven, N.

    2014-01-01

    The aim of the research project was to achieve closure by two complementary means: 1) maximising reuse of the nutrient solution by solving problems in recirculation that leads to discharge, and 2) purification of the left over discharged water. In this paper the technical and economic aspects of

  13. Polar body array CGH for prediction of the status of the corresponding oocyte. Part II: technical aspects

    NARCIS (Netherlands)

    Magli, M. Cristina; Montag, Markus; Köster, Maria; Muzi, Luigi; Geraedts, Joep; Collins, John; Goossens, Veerle; Handyside, Alan H.; Harper, Joyce; Repping, Sjoerd; Schmutzler, Andreas; Vesela, Katerina; Gianaroli, Luca

    2011-01-01

    The purpose of this study was to assess the technical aspects related to polar body (PB) biopsy, which might have an influence on the results of the microarray comparative genomic hybridization analysis. Furthermore, a comparison was made between two biopsy methods (mechanical and laser). Biopsy of

  14. Technical Aspects and Validation of a New Biofeedback System for Measuring Lower Limb Loading in the Dynamic Situation

    NARCIS (Netherlands)

    Raaben, Marco; Holtslag, Herman R.; Augustine, Robin; van Merkerk, Rutger O.; Koopman, Bart F. J. M.; Blokhuis, Taco J.

    2017-01-01

    A variety of techniques for measuring lower limb loading exists, each with their own limitations. A new ambulatory biofeedback system was developed to overcome these limitations. In this study, we described the technical aspects and validated the accuracy of this system. A bench press was used to

  15. Technical Aspects and Validation of a New Biofeedback System for Measuring Lower Limb Loading in the Dynamic Situation

    NARCIS (Netherlands)

    Raaben, M.; Holtslag, H.R.; Augustine, R.; van Merkerk, R.O.; Koopman, Hubertus F.J.M.; Blokhuis, T.J.

    2017-01-01

    Background: A variety of techniques for measuring lower limb loading exists, each with their own limitations. A new ambulatory biofeedback system was developed to overcome these limitations. In this study, we described the technical aspects and validated the accuracy of this system. Methods: A bench

  16. Technical and economic aspects of purification strategies to minimise discharge water from companies with closed soilless cultivation systems

    NARCIS (Netherlands)

    Os, van E.A.; Bruins, M.A.; Beerling, E.A.M.; Jurgens, R.; Appelman, W.; Enthoven, N.

    2014-01-01

    The aim of the research project was to achieve closure by two complementary means: 1) maximising reuse of the nutrient solution by solving problems in recircula-tion that leads to discharge, and 2) purification of the left over discharged water. In this paper the technical and economic aspects of

  17. Analisis Statistika dengan SPSS

    OpenAIRE

    Mustari, Kahar

    2012-01-01

    Buku ini membahas tentang berbagai model analisis statistika yang dapat digunakan dalam berbagai bidang penelitian. Pembahasan buku ini dilengkapi pula dengan penerapan analisis statistika yang menggunakan program SPSS versi 20 sehingga memudahkan pembaca untuk menerapkannya. Oleh karena itu, buku ini penting dibaca oleh mahasiswa atau peneliti yang melakukan pengolahan data penelitian.

  18. Safety related design and economic aspects of HTGRs. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-04-01

    The purpose of the Technical Committee Meeting (TCM) was to provide the opportunity to review the status of design and development activities associated with safety related and economic aspects of HTGRs, and to identify pathways which may provide the opportunity for international cooperation in addressing these issues. The HTGR, as a nuclear heat source for the safe, economic and efficient production of electricity and high temperature industrial processes has, within the past few years, become a significantly increasing influence in the future of nuclear power. Nuclear test facilities with the capability of achieving core outlet temperatures to 950 deg. C are presently under construction in China and Japan. These plants will be utilized to support HTGR research and development activities, including electricity generation via the gas turbine and validation of high temperature process heat applications. Also, major development programmes focusing on the generation of electricity through the direct cycle gas turbine are in progress by ESKOM, the state electric utility of South Africa, and by a consortium of organizations from the Russian Federation, USA, France and Japan. Other national programmes focusing on research and development of the HTGR are underway including the Netherlands, where an evaluation is being completed on a heat and power co-generation plant utilizing a small direct cycle HTR; in Germany, where the primary focus is centered on basic issues of reactor safety and innovative reactor technology; in Indonesia with the evaluation of process heat applications such as coal liquefaction, hydrogen production and high temperature reforming of methane; and in the USA with the recent re-introduction of national support for the HTGR specifically directed to the burning of weapons plutonium. The status information presented in several of the papers is as of the time of drafting. Thus other later material should be referenced for more current status information

  19. Safety related design and economic aspects of HTGRs. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-04-01

    The purpose of the Technical Committee Meeting (TCM) was to provide the opportunity to review the status of design and development activities associated with safety related and economic aspects of HTGRs, and to identify pathways which may provide the opportunity for international cooperation in addressing these issues. The HTGR, as a nuclear heat source for the safe, economic and efficient production of electricity and high temperature industrial processes has, within the past few years, become a significantly increasing influence in the future of nuclear power. Nuclear test facilities with the capability of achieving core outlet temperatures to 950 deg. C are presently under construction in China and Japan. These plants will be utilized to support HTGR research and development activities, including electricity generation via the gas turbine and validation of high temperature process heat applications. Also, major development programmes focusing on the generation of electricity through the direct cycle gas turbine are in progress by ESKOM, the state electric utility of South Africa, and by a consortium of organizations from the Russian Federation, USA, France and Japan. Other national programmes focusing on research and development of the HTGR are underway including the Netherlands, where an evaluation is being completed on a heat and power co-generation plant utilizing a small direct cycle HTR; in Germany, where the primary focus is centered on basic issues of reactor safety and innovative reactor technology; in Indonesia with the evaluation of process heat applications such as coal liquefaction, hydrogen production and high temperature reforming of methane; and in the USA with the recent re-introduction of national support for the HTGR specifically directed to the burning of weapons plutonium. The status information presented in several of the papers is as of the time of drafting. Thus other later material should be referenced for more current status information

  20. Geological-Technical and Geo-engineering Aspects of Dimensional Stone Underground Quarrying

    Science.gov (United States)

    Fornaro, Mauro; Lovera, Enrico

    Underground exploitation of dimensional stones is not a novelty, being long since practised, as proved by a number of historical documents and by a certain number of ancient quarrying voids throughout the world. Anyway, so far, open cast quarrying has been the most adopted practice for the excavation of dimensional stones. One primary reason that led to this situation is of course connected to the lower production costs of an open cast exploitation compared to an underground one. This cheapness has been supported by geological and technical motives: on the one hand, the relative availability of surface deposits and, on the other, the development of technologies, which often can be used only outdoor. But, nowadays, general costs of quarrying activities should be re-evaluated because new, and often proper, restrictions have been strongly rising during recent years. As a consequence of both environmental and technical restrictions, pressure will more and more arise to reduce open cast quarrying and to promote underground exploitations. The trend is already well marked for weak rocks - for instance in the extractive basin of Carrara, where about one hundred quarries are active, 30 per cent is working underground, but also in Spain, Portugal and Greece the number of underground marble quarries is increasing - but not yet for hard rock quarrying, where only few quarries are working underground all around the world. One reason has to be found in cutting technologies traditionally used. In weak rocks, diamond wire saw and chain cutter are usable, with few adaptations, in underground spaces, while drilling and blasting, the traditional exploitation method for hard stone, is not easily usable in a confined space, where often only one free face is available. Many technicians and researchers agree that two technologies will probably open the door to underground quarrying in hard rocks: diamond wire and water jet. The first one is already available; the second should still be

  1. An analysis of technical aspects of the arthroscopic Bankart procedure as performed in the United States.

    Science.gov (United States)

    Burks, Robert T; Presson, Angela P; Weng, Hsin-Yi

    2014-10-01

    The purpose of this study was to investigate the intersurgeon variation in technical aspects of performing an arthroscopic Bankart repair. A unique approach with experienced equipment representatives from 3 different arthroscopic companies was used. Experienced representatives were identified by DePuy Mitek, Smith & Nephew, and Arthrex and filled out questionnaires on how their surgeons performed arthroscopic Bankart procedures. This was performed in a blinded fashion with no knowledge of the identities of the specific surgeons or representatives by us. A video on different aspects of the procedure was observed by each representative before filling out the questionnaire to help standardize responses. Data were collected using REDCap (Research Electronic Data Capture). Data were analyzed as an infrequent observation with 0% to 30% of representatives reporting the observation; sometimes, 31% to 70% reporting the observation; and often, greater than 70% of representatives reporting. Seventy-six percent of representatives had 6 or more years of arthroscopic experience. Forty-three percent of representatives reported that their surgeons use 3 portals for the procedure often. Forty-four percent reported that viewing was performed exclusively from the posterior portal while the surgeon was performing the repair. Seventy-three percent reported that the Hill-Sachs lesion was observed often, and 61% reported that the posterior labrum was evaluated often before the repair. Only 25% of representatives reported that the Bankart lesion was extensively released and mobilized often. Thirty-three percent reported 3 anchors as being used often. Seventy-five percent reported biocomposite anchors as being used often. Single-loaded anchors were reported as being used often by 47%. Eighty-one percent reported that sutures were placed in a simple fashion. Eighty-three percent reported the use of any posterior sutures or anchors for additional plication as infrequent. There is significant

  2. AREVA Technical Days (ATD) session 3: operations of the reactors and services division, technical and economic aspects

    International Nuclear Information System (INIS)

    2003-01-01

    These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This third session deals with the reactors technologies basics, the EPR and SWR 1000 issues and outlook, the nuclear systems of the future, the business opportunities and business models. (A.L.B.)

  3. Neuroimaging findings with MDMA/ecstasy: technical aspects, conceptual issues and future prospects.

    Science.gov (United States)

    Reneman, Liesbeth; de Win, Maartje M L; van den Brink, Wim; Booij, Jan; den Heeten, Gerard J

    2006-03-01

    Users of ecstasy (3,4-methylenedioxymethamphetamine; MDMA) may be at risk of developing MDMA-induced injury to the serotonin (5-HT) system. Previously, there were no methods available for directly evaluating the neurotoxic effects of MDMA in the living human brain. However, development of in vivoneuroimaging tools have begun to provide insights into the effects of ecstasy on the human brain. Single photon emission computed tomography (SPECT), positron emission computed tomography (PET) and proton magnetic resonance spectroscopy (1H-MRS) studies which have evaluated ecstasy's neurotoxic potential will be reviewed and discussed in terms of technical aspects, conceptual issues and future prospects. Although PET and SPECT may be limited by several factors such as the low cortical uptake and the use of a non-optimal reference region (cerebellum) the few studies conducted so far provide suggestive evidence that people who heavily use ecstasy are at risk of developing subcortical, and probably also cortical reductions in serotonin transporter (SERT) densities, a marker of 5-HT neurotoxicity. There seem to be dose-dependent and transient reductions in SERT for which females may be more vulnerable than males. 1H-MRS appears to be a less sensitive technique for studying ecstasy's neurotoxic potential. Whether individuals with a relatively low ecstasy exposure also demonstrate loss of SERT needs to be determined. Because most studies have had a retrospective design, in which evidence is indirect and differs in the degree to which any causal links can be implied, longitudinal studies in human ecstasy users are needed to draw definite conclusions.

  4. Real-time three-dimensional speckle tracking echocardiography: technical aspects and clinical applications

    Directory of Open Access Journals (Sweden)

    Sorrentino R

    2016-11-01

    Full Text Available Regina Sorrentino, Roberta Esposito, Enrica Pezzullo, Maurizio Galderisi Department of Advanced Biomedical Sciences, Interdepartmental Laboratory of Cardiac Imaging, Federico II University Hospital, Naples, Italy Abstract: Three-dimensional speckle tracking echocardiography (3D STE is a novel technique for the quantification of cardiac deformation based on tracking of ultrasonic speckles in gray scale full-volume 3D images. Developments in ultrasound technologies have made 3D speckle tracking widely available. Two-dimensional echocardiography has intrinsic limitations regarding estimation of left ventricular (LV volumes, ejection fraction, and LV mechanics, due to its inherent foreshortening errors and dependency on geometric models. The development of 3D echocardiography has improved reproducibility and accuracy. Data regarding the feasibility, accuracy, and clinical applications of 3D STE are rapidly assembling. From the tracking results, 3D STE derives several parameters, including longitudinal, circumferential and radial strain, as well as a combined assessment of longitudinal and circumferential strain, termed area strain. 3D STE can also quantify LV rotational movements such as rotation, twist, and torsion. 3D STE provides a better insight on global and regional myocardial deformation. Main applications include detection of subclinical myocardial involvement in heart failure, arterial hypertension, dyssynchrony, and ischemic heart disease. Emerging areas of application include a large spectrum of heart-involving systemic conditions, such as prediction of rejection in heart transplant patients, early detection of cardiotoxicity in patients receiving chemotherapy for cancer, and deeper physiological understanding of LV contraction mechanics in different types of athletes. Aim of this review is to discuss background, technical acquisition and processing aspects as well as recognized and developing clinical applications of this emerging

  5. Plasma exchange in the intensive care unit: Technical aspects and complications.

    Science.gov (United States)

    Lemaire, Aurélie; Parquet, Nathalie; Galicier, Lionel; Boutboul, David; Bertinchamp, Rémi; Malphettes, Marion; Dumas, Guillaume; Mariotte, Eric; Peraldi, Marie-Noëlle; Souppart, Virginie; Schlemmer, Benoit; Azoulay, Elie; Canet, Emmanuel

    2017-12-01

    Data on plasma exchange therapy in the intensive care unit (ICU) setting are scarce. We aimed to describe the technical aspects and the adverse events associated with the procedure in critically ill patients. All adult patients treated by plasma exchange in the medical ICU of the Saint-Louis university hospital between January 1, 2013 and March 31, 2015 were prospectively included. We report on 260 plasma exchange procedures performed in 50 patients. The centrifugation technique was used for 159 (61%) procedures and the filtration technique for the other 101 (39%) procedures. Both techniques had similar efficacy to treat hyperviscosity syndrome (n = 18). Seventy (26.9%) of the 260 plasma exchange procedures were reported with at least one adverse reaction. Centrifugation and filtration techniques had similar rates of adverse reactions (23.9 vs. 31.7%, P = .19). Hypotension was the most reported (n = 21, 8%) and correlates with a low hematocrit before therapy. Most complications were related to allergic reactions to the replacement fluids. Coagulation disorders depended on the type of replacement fluid. The post-exchange fibrinogen level was decreased by 54% [48;66] with albumin 5%, and 4% [-5;17] with plasma frozen within 24 h. Twenty-three (22.8%) of the 101 filtration procedures experienced filter clotting. Filter clotting was associated with a higher volume exchange prescribed when compared to procedures without filter clotting (4600 [4000;5000] ml vs. 3900 [3600;4800] ml, P < .01). Plasma exchange is a relatively safe and generally well-tolerated procedure in the ICU setting. Most adverse events are unpredictable and related to minor allergic reactions. © 2017 Wiley Periodicals, Inc.

  6. Technical and commercial aspects of the connection of wind turbines to electricity supply networks in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, P. [Garrad Hassan & Partners Ltd., Glasgow (United Kingdom)

    1996-12-31

    This paper reviews some technical and commercial issues now topical for wind energy developments in Europe. The technical issues are important because of the weak nature of the existing electricity systems in rural or upland areas. Several commercial issues are considered which may improve the economics of wind energy as market incentives are gradually withdrawn. 9 refs.

  7. Regulatory aspects of the use of PSA to evaluate technical specifications

    International Nuclear Information System (INIS)

    Rumpf, J.

    1991-01-01

    Based on experiences gained in PSA activities the regulatory body of the GDR initiated a programme to investigate the feasibility of using PSA for the evaluation of technical specifications. This programme is just under work. In addition, to improve PSA, the GDR takes part in a programme which is aimed at performing plant specific level 1, PSA as well as and which enables operating organizations to carry out PSA on their own. The most important of some preliminary general findings presented in this paper are: - Technical specifications form a well established envelope of operational conditions and procedures. A total re-evaluation is not considered necessary; Probabilistic evaluation of technical specifications should be an integrated part of PSA activities (at least level 1). Single assessment is not considered reasonable; Probabilistic evaluation of technical specifications has to be based on plant specific information and realistic accident sequence calculations; Up to now no quantitative probabilistic criteria for technical specifications have been established. (author)

  8. Technical aspects of the deep inspiration breath-hold technique in the treatment of thoracic cancer

    International Nuclear Information System (INIS)

    Mah, Dennis; Hanley, Joseph; Rosenzweig, Kenneth E.; Yorke, Ellen; Braban, Louise; Ling, C. Clifton; Leibel, Stephen A.; Mageras, Gikas

    2000-01-01

    Purpose: The goal of this paper is to describe our initial experience with the deep inspiration breath-hold (DIBH) technique in conformal treatment of non-small-cell lung cancer with particular emphasis on the technical aspects required for implementation. Methods and Materials: In the DIBH technique, the patient is verbally coached through a modified slow vital capacity maneuver and brought to a reproducible deep inspiration breath-hold level. The goal is to immobilize the tumor and to expand normal lung out of the high-dose region. A physicist or therapist monitors and records patient breathing during simulation, verification, and treatment using a spirometer with a custom computer interface. Examination of internal anatomy during fluoroscopy over multiple breath holds establishes the reproducibility of the DIBH maneuver for each patient. A reference free-breathing CT scan and DIBH planning scan are obtained. To provide an estimate of tumor motion during normal tidal breathing, additional scan sets are obtained at end inspiration and end expiration. These are also used to set the spirometer action levels for treatment. Patient lung inflation is independently verified over the course of treatment by comparing the distance from the isocenter to the diaphragm measured from the DIBH digitally reconstructed radiographs to the distance measured on the portal films. Patient breathing traces obtained during treatment were examined retrospectively to assess the reproducibility of the technique. Results: Data from the first 7 patients, encompassing over 250 treatments, were analyzed. The inferred displacement of the centroid of gross tumor volume from its position in the planning scan, as calculated from the spirometer records in over 350 breath holds was 0.02 ± 0.14 cm (mean and standard deviation). These data are consistent with the displacements of the diaphragm (-0.1 ± 0.4 cm; range, from -1.2 to 1.1 cm) relative to the isocenter, as measured on the (92) portal films

  9. Technical aspects of atomic and molecular data processing and exchange. 19. meeting of the A+M Data Centres and ALADDIN Network. Summary report of an IAEA technical meeting

    International Nuclear Information System (INIS)

    Humbert, D.

    2008-05-01

    The proceedings of the IAEA Technical Meeting on Technical Aspects of Atomic and Molecular Data Processing and Exchange (19th Meeting of A+M Data Centres and ALADDIN Network), held on 3-5 October, 2007 in Vienna, Austria, are briefly described. Conclusions and recommendations are presented concerning various proposed projects and their priorities involving A+M data compilation and evaluation and technical aspects of data processing, exchange, and distribution. (author)

  10. Summary report of IAEA technical meeting on technical aspects of atomic and molecular data processing and exchange - 18th meeting of the A+M Data Centres and ALADDIN Network

    International Nuclear Information System (INIS)

    Hubert, D.

    2006-01-01

    The IAEA Technical Meeting on 'Technical Aspects of Atomic and Molecular Data Processing and Exchange - 18th Meeting of A+M Data Centres and ALADDIN Network' was held on 10-11 October 2005, in Vienna, Austria. The discussions and presentations focused on the priorities in A+M data compilation and evaluation, and are summarized in this report. Conclusions and recommendations on the technical aspects of data processing, exchange and distribution are also presented. (author)

  11. Report on the consultants' meeting on co-ordination of the nuclear reaction data centres. (Technical aspects)

    International Nuclear Information System (INIS)

    Schwerer, O.; Lammer, M.; Pronyaev, V.G.

    1999-08-01

    This report summarizes the 1999 Co-ordination Meeting on Technical Aspects of the Co-operation of the Nuclear Reaction Data Centres, hold at the IAEA Headquarters in Vienna, Austria, 18 to 20 May 1999. The meeting was attended by scientists from 11 Nuclear Data Centres from 7 Member States and 2 International Organizations. The present document contains a meeting summary, the conclusions and actions, and progress reports of the Participating Data Centres. (author)

  12. Report on the IAEA consultants' meeting on the co-ordination of nuclear reaction data centres (technical aspects)

    Energy Technology Data Exchange (ETDEWEB)

    Schwerer, O [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria)

    2001-07-01

    This report summarizes the results of the IAEA Consultants' Meeting on the Co-ordination of Nuclear Reaction Data Centres (Technical Aspects), held at the IAEA Headquarters, Vienna, Austria, 28 to 30 May 2001. The meeting was attended by 16 participants from 10 co-operating data centres from six Member States and two International Organizations. The report contains a meeting summary, the conclusions and actions, progress and status reports of the participating data centres and working papers considered at the meeting. (author)

  13. Traction batteries for industrial trucks. Technical aspects, selection criteria, operation. Antriebsbatterien fuer Flurfoerderzeuge. Technik, Auswahlkriterien und Betrieb

    Energy Technology Data Exchange (ETDEWEB)

    Roedig, W

    1987-01-01

    This lavishly illustrated booklet presents an introduction to the technology of the lead battery, which is commonly used as traction battery for industrial trucks. Technical specifications and standards, selection criteria for batteries and the novel CSM battery technology are mentioned. Most of the book deals with the practical aspects of batteries, e.g. installation, starting, maintenance, servicing, battery change, battery charging, monitoring, measurement, etc.). Battery recycling is briefly gone into.

  14. ATS-6 - Technical aspects of the Health/Education Telecommunications Experiment

    Science.gov (United States)

    Boor, J. L.; Braunstein, J.; Janky, J. M.; Ogden, D.; Potter, J. G.; Harper, E. L.; Volkmer, E.; Whalen, A. A.; Henderson, E.; Hupe, H. H.

    1975-01-01

    An overview is given of the HET experiment on ATS-6. The paper is divided into nine parts, including a technical overview, a preliminary evaluation of the HET demonstration, a review of operations at the Denver uplink terminal, a discussion of remote ground terminals, a review of C-band comprehensive terminals and of S-band comprehensive terminals, and parts devoted to general network operations, technical management and effectiveness of the network, and the site equipment operator.

  15. Critical Analysis of the Quality, Readability, and Technical Aspects of Online Information Provided for Neck-Lifts.

    Science.gov (United States)

    Rayess, Hani; Zuliani, Giancarlo F; Gupta, Amar; Svider, Peter F; Folbe, Adam J; Eloy, Jean Anderson; Carron, Michael A

    2017-03-01

    The number of patients using the internet to obtain health information is growing. This material is unregulated and heterogeneous and can influence patient decisions. To compare the quality, readability, and technical aspects of online information about neck-lifts provided by private practice websites vs academic medical centers and reference sources. In this cross-sectional analysis conducted between November 2015 and January 2016, a Google search of the term neck-lift was performed, and the first 45 websites were evaluated. The websites were categorized as private practice vs other. Private websites (PWs) included sites created by private practice physicians. Other websites (OWs) were created by academic medical centers or reference sources. Quality, readability, and technical aspects of online websites related to neck-lifts. Quality was assessed using the DISCERN criteria and the Health on the Net principles (HONcode). Readability was assessed using 7 validated and widely used criteria. Consensus US reading grade level readability was provided by a website (readabilityformulas.com). Twelve technical aspects were evaluated based on criteria specified by medical website creators. Forty-five websites (8 OWs [18%] and 37 PWs [82%]) were analyzed. There was a significant difference in quality between OWs and PWs based on the DISCERN criteria and HONcode principles. The DISCERN overall mean (SD) scores were 2.3 (0.5) for OWs and 1.3 (0.3) for PWs (P analysis, the mean (SD) was 8.6 (1.8) (range, 5-11) for OW, and the mean (SD) was 5.8 (1.7) (range, 2-9) for PW. The mean (SD) readability consensus reading grade level scores were 11.7 (1.9) for OWs and 10.6 (1.9) for PWs. Of a total possible score of 12, the mean (SD) technical scores were 6.3 (1.8) (range, 4-9) for OWs and 6.4 (1.5) (range, 3-9) for PWs. Compared with PWs, OWs had a significantly higher quality score based on both the DISCERN criteria and HONcode principles. The mean readability for OWs and PWs was

  16. Nuclear power plant diagnostics - Safety aspects and licensing. Report of a technical committee meeting. Working material

    International Nuclear Information System (INIS)

    1997-01-01

    The aim of the Technical Committee Meeting (TCM) was to review developed systems and methods in diagnostics in the scope of their impacts and importance to the safety of Nuclear Power Plants. Papers presented on TCM came from different sources, from developers, from manufacturers, from licensing authorities and from NPP personal. They reflect up to date status in the given subject. Participants of TCM formulated three working groups to elaborate different questions which were raised during the discussions. Their results are reflected in the three chapter titles of the given material. Annex 1 to this document contains presentations made at the Technical Committee Meeting. Refs, figs, tabs

  17. PRACTICAL ASPECTS FOR DEVELOPMENT OF INFORMATIONAL AND EDUCATIONAL ENVIRONMENT OF HIGH TECHNICAL SCHOOL

    Directory of Open Access Journals (Sweden)

    Sergey F. Rodionov

    2015-01-01

    Full Text Available The approach is offered to development of the informational and educational environment of high technical school,based on deep integration of electronic educational content with methods and tools for the engineering problemssolving. The application program interface (API is used asthe main integration instrument, which modern Its have.

  18. [Technical aspects of treatments with single- and multi-unit fixed dental prostheses

    NARCIS (Netherlands)

    Wiersema, E.J.; Kreulen, C.M.; Latzke, P.; Witter, D.J.; Creugers, N.H.J.

    2014-01-01

    For the manufacture of single- and multi-unit fixed dental prostheses, effective communication between dentist and dental technician is required. Mutual insight concerning the (im)possibilities of available treatments and technical options is prerequisitefor this communication. The manufacture of

  19. 76 FR 21043 - Notice of Public Meeting: Technical Aspects of Mandatory Deposit of Published Electronic Works...

    Science.gov (United States)

    2011-04-14

    ... mandatory deposit requirements of the copyright law. The objective is to identify file submission, packaging... mandatory deposit provisions of the copyright law. Under the interim regulation, certain works available... LIBRARY OF CONGRESS Copyright Office [Docket No. 2011-3] Notice of Public Meeting: Technical...

  20. A Tanzanian Perspective of the Technical Aspects of IT Service Management Education

    Science.gov (United States)

    Kemppainen, Jyri; Tedre, Matti; Sutinen, Erkki

    2012-01-01

    Information technology (IT) professionals face markedly different kinds of challenges in developing countries from the ones in developed countries. Based on the research literature and our fourteen years of fieldwork in Iringa, Tanzania, we have identified eight groups of technical characteristics of IT work that significantly affect the work of…

  1. Land and water management paradigms in Iran: technical, social and ethical aspects

    NARCIS (Netherlands)

    Balali, M.R.; Keulartz, F.W.J.; Korthals, M.J.J.A.A.

    2007-01-01

    With respect to land and water management in Iran, three paradigms can be distinguished. The pre-modern paradigm can be characterised by its key technical system (the `qanat¿ underground irrigation system), its main social institution (the `buneh¿ cooperative organisation of agricultural

  2. Technical assessment concept of geological aspect to define site NPP prospectus in Indonesia

    International Nuclear Information System (INIS)

    Akhmad Muktaf Haifani

    2013-01-01

    Geological aspects become an important aspect in determining the prospective nuclear power plant site. Geological investigation can be categorized based on the spatial scale of Regional and Local and every stage will have different levels of investigation. Understanding Regional Tectonics and Regional Geology of Indonesia is very important and helps to facilitate the evaluators to review documents. Unification of standard of site conformity assessment in terms tectonic aspect particularly geological stability becomes very necessary in the assessment of the suitability of the proposed licensed document, given the tectonic-forming process in Indonesia is highly variable. Safety criteria is key parameters that must be considered to solve any problems and a proper bridge in determining the site parameters of the proposed by applicants and compliance with any requirement of Regulatory Body. (author)

  3. Technical aspects of preservation of architectural heritage of Modern in Serbia

    OpenAIRE

    Kuzović Duško

    2016-01-01

    This paper analyzes the technical and technological problems of preserving architecture from the period 1945-1990. Complex social and economic conditions hinder the proper approach to the preservation of Modernist architecture. Modern functions that are inserted into objects of Modern require complex changes to the building. If changes are not made in accordance with the principles of profession risk to completely lose the architectural value of the buildings. It is necessary to specify the t...

  4. Physical and technical aspects of cryomedicine. Physikalische und technische Aspekte der Kryomedizin

    Energy Technology Data Exchange (ETDEWEB)

    Spoerl, E. (Medizinische Akademie, Dresden (Germany)); Krantz, H. (Medizinische Akademie, Dresden (Germany))

    1993-01-01

    Some of the functional principles of cryomedical device engineering, the special features of heat transmission at the tissue surface and a model for calculating treatment parameters are presented for a discussion of focal cold application dosed according to indication. The elaboration of the physico-technical basics of cryotherapy has contributed to the development of this originally empirically oriented method to a safe and widely accepted therapeutic procedure. (orig.)

  5. Comparative technical aspects of the Nephrops norvegicus (L. fishery in the northern Mediterranean Sea

    Directory of Open Access Journals (Sweden)

    Francesc Sarda

    1998-12-01

    Full Text Available A comparative study of the technical characteristics of the Norway lobster fishery in the Mediterranean Sea is presented. The different trawl vessels, trawl gears, trawling manoeuvres, and status of the statistics compiled by the administrations are described. The main conclusions are that catchability has increased with technological advances, official landings statistics are flawed in most of the Mediterranean, and fishing methods differed from country to country.

  6. Technical and economic aspects of the transmission of energy at extra high voltages

    Energy Technology Data Exchange (ETDEWEB)

    Kahnt, R

    1967-01-01

    The reasons for the employment of higher transmission voltages are listed and the points decisive for the selection of three phase ac or dc systems are reviewed. A treatment of the technical and economic problems arising in three phase extra high voltage transmission is presented. These include selection of voltage, economical design of power lines, insulation problems, power supply dependability, equipment rating and reactive power and stability problems.

  7. TECHNICAL ASPECTS REGARDING THE IMPROVEMENT OF AEROSPACE AIR DEFENSE VECTORS’ PERFORMANCES

    Directory of Open Access Journals (Sweden)

    Vasile SANDRU

    2013-01-01

    Full Text Available Confronted with the spectacular evolution of the aircraft and other aerial vehicles, the systems destined to combat them, especially Surface-to-Air Missile Systems (SAMS, went through an accelerated loss of their performance. The financial crisis has forced an extension of the system operation even if the system is outdated. Therefore, a new modernized version has been designed. Many times, it is better to improve an existing system than to buy a new one. This article describes the diversity of SAMS’s challenges, involving a decrease in time regarding their number. The types of challenges can be divided in two categories: technical and institutional ones. The technical challenges can be also divided in two categories: deterioration of material and obsolescence. The classes of material that present interest for us are aerodynamic vector structure, propulsion, and special systems. From an institutional point of view, the main problems are: cost versus performance and cost versus the remaining lifetime (technical resource of the air defense system. The article finishes with conclusions that support the possibility and necessity of a SAMS upgrade, given the change of the threats characteristics.

  8. On the technical, economical and proliferation aspects of the different enrichment techniques. Executive summary

    International Nuclear Information System (INIS)

    1979-05-01

    The major conclusions and recommendations of WG.2, as contained in the draft report INFCE/WG.2/14, are summarized. The availability of enrichment services, the demand for such services, the assurance of long term supply, the special needs of developing countries, and the assessment and comparison of proliferation aspects are summarized. Nine general conclusions are listed

  9. Integral risk assessment. Technical, ethical and social aspects. Ganzheitliche Risikobetrachtungen. Technische, ethische und soziale Aspekte

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, S; Yadigaroglu, G [eds.

    1991-01-01

    The series of lectures which forms the basis of this book and took place in the winter of 1989/90 at the ETH in Zuerich were held for the purpose of discussing the stage of development of our system of ethics in view of the extremely fast pace of technological progress and the risks which accompany it. Legal, psychological and political aspects of the problem were examined, but the emphasis was placed on ethical aspects. The effects which are examined in conventional risk analyses can be considered as a part of the ethical and social aspects involved, and in turn, the consideration of ethical and social aspects can be viewed as an extension of the conventional form of risk analysis. In any case, among risk experts, the significance of ethical and social factors is uncontested, especially as regards activities which can have far-reaching repurcussions. Some objective difficulties interfere with this goal, however: - No generally acknowledged set of ethical values exists. - Cultural influences and personal motives can interfere. - Normally a risk assessment is carried out in reference to individual facilities and within a small, clearly defined framework. Under certain circumstances, generalizations which are made for complete technological systems can lead to completely different conclusions. One contribution deals with integral views of the risks of atomic energy from an ethical and social perspective. (orig.).

  10. Technical aspects of atomic and molecular data processing and exchange, 20. meeting of the A+M Data Centres and ALADDIN Network. Summary report of an IAEA technical meeting

    International Nuclear Information System (INIS)

    Humbert, D.; Braams, B.J.

    2010-01-01

    The proceedings of the IAEA Advisory Group Meeting on Technical Aspects of Atomic and Molecular Data Processing and Exchange (20th Meeting of A+M Data Centres Network), 7-9 September 2009 at IAEA Headquarters in Vienna, are summarized. The meeting conclusions and recommendations on priorities in A+M data compilation and evaluation and on technical aspects of data processing and exchange are also presented. (author)

  11. Underground cables as an alternative to overhead lines. A comparison of economic and technical aspects of voltages over 22 kV

    Energy Technology Data Exchange (ETDEWEB)

    Trohjell, J.E.; Vognild, I.H.

    1994-07-11

    The report presents technical and economical aspects of underground cables compared to overhead lines in Norway in high voltage transmission systems above 22 kV. The economical comparison between the two options includes capital costs of installation (investment costs), maintenance costs and costs of electrical losses. The main technical issues discussed are reliability and flexibility. 35 refs., 23 figs., 29 tabs.

  12. A Review of Warm Mix Asphalt Technology: Technical, Eco-nomical and Enviromental Aspects

    Directory of Open Access Journals (Sweden)

    Hugo Alexander Rondón

    2015-09-01

    Full Text Available In general terms, warm mix asphalt (WMA technology presents a wide potential for successful use in road works construction projects. However, concerns remain regarding the durability and behavior of WMA mixtures in the long term, which need to be addressed. This review focuses on the technical, economic and environmental advantages and disadvantages. The review concludes that the main advantage, at the moment, of this technology concerns the environment. At the end of this work, the authors include certain recommendations for future works to continue strengthening the development of WMA technology.

  13. Chernobylsk and its environmental impacts-Some considerations about technical and legal aspects

    International Nuclear Information System (INIS)

    Malheiros, T.M.M.; Bomfim, L.F.S. do.

    1987-01-01

    Several informations and, technical and scientific concepts related to nuclear energy, from the Chernobylsk accident and its economic, social and juridical consequences, are presented. The origins of the accident and consequences for environment are analysed. The questions such as prompt information of nuclear and radiological accidents passed to be regulated by international treaties caused, particularly, by the Chernobylsk accident, are shown. The transfrontier pollution and the civil liability of Russia by damages caused for the population of other countries, are discussed. Considerations about feed importation from Europe by Brazil, in particular, the milk, which has put in action several juridical processes, are done. (M.C.K.) [pt

  14. Technical and political aspects of the generation of electrical energy in the USA

    International Nuclear Information System (INIS)

    Ullmann, K.

    1990-01-01

    The north-east black-out in the 1960s, the Arab oil embargo at the beginning of the 1970s and the nuclear accident at Three Mile Island in the 1970s have profoundly affected the electricity supply industry in the United States. This paper explains the effects of these events on the electricity supply industry from the socio-economic and political points of view. The development trends affecting the present structure of the supply industry are indicated in the context of environmental factors. The technical development of power plant equipment and -systems and also of alternative energy sources in the light of these factors are discussed. (orig.) [de

  15. Technical Aspect for Operating Portable Prompt Gamma Neutron Activation Analysis (PGNAA) on Terengganu Inscribed Stone

    International Nuclear Information System (INIS)

    Rasif Mohd Zain; Hearie Hassan; Roslan Yahya

    2015-01-01

    Prompt Gamma Neutron Activation analysis (PGNAA) is a type of neutron activation analysis which can determined element with nearly no gamma ray decay after being irradiated by neutron sourced. Thus, element that cannot be determined by the conventional NAA for example H, B, N, Si and Cd, can be determine by PGNAA. This paper focuses on the technical working procedure for operating portable PGNAA in field work. The device is designed as a portable non-destructive investigation tool applying an isotopic neutron source (Cf-252) and a gamma-ray spectroscopy system for in-situ investigation. The studied have been carried out on Terengganu inscribed stone at Terengganu State Museum. (author)

  16. Technical and economical aspects of a large and a small plant for irradiation of liquid waste

    International Nuclear Information System (INIS)

    Herrnhut, H.; Marsch, U.; Bosshard, E.

    1976-01-01

    Description of the further development of the irradiation plant for sewage sludge which is in operation at the sewage water treatment plant of the Abwasserverband Ampergruppe at Geiselbullach. Taking into consideration the operating experience, the conception of the plant was optimized, the design was simplified. The loading and reloading of the radioactive sources could now be carried out during operation of the plant. The economical aspects were considered too and the calculated cost of the treatment was summarized in a table. (author)

  17. Technical, environmental and regulatory aspects of waste management and their reflection in the IAEA programme

    International Nuclear Information System (INIS)

    Richter, D.K.

    1982-01-01

    Within the IAEA training course on waste management this paper is intended to overview technological, radiological, encironmental, regulatory and institutional aspects of importance in establishing a waste management policy for nuclear power programmes; the objectives and results of IAEA activities in this field; and some current issues from a national and international perspective with special consideration on the needs of countries embarking on nuclear power. (orig./RW)

  18. BIOPROTA: international collaboration on key technical issues in biosphere aspects of long-term radiological assessment

    International Nuclear Information System (INIS)

    Smith, G.M.; Kerrigan, E.L.; Degnan, P.

    2006-01-01

    BIOPROTA is an international collaborative project which was set up to address key uncertainties in biosphere aspects of assessment of the long-term impact of contaminant releases associated with radioactive waste management. The project began in 2002 and has benefited from the knowledge and experience of organisations from Canada, Finland, France, Japan, Russia, Spain, Sweden, UK and the USA. This paper describes the BIOPROTA objectives and scope, the on-going work programme and methods of work. (author)

  19. Technical aspects of quality assurance in mammography: Preliminary results from Serbia

    Directory of Open Access Journals (Sweden)

    Živković Monika M.

    2010-01-01

    Full Text Available Mammography is the method of choice for early detection of breast cancer. In Serbia, mammography is performed only clinically, although there is a plan to introduce mammography as a screening method. Currently, there are 60 mammographic units in practice, resulting in 70 000 mammographies annually. The survey was conducted in order to investigate mammographic practice in Serbia, identify weak points and suggest appropriate corrective measures. Basic technical parameters of the X-ray tube and generator, processing, image quality, and patient doses in 20 mammographic units were studied. The survey demonstrated considerable variations in technical parameters that affect image quality, and patients doses. Patient dose levels, in terms of the mean glandular dose, were fairly consistent with current European reference levels: 1.8 (0.40-4.3 mGy. However, due to inappropriate image receptors, image processing and viewing conditions and automatic exposure control adjustment, suboptimal image quality was a common finding. Simple improvements of the radiographic technique and maintenance procedure, along with the rigid implementation of the quality control procedure and training of the operating staff, would improve the performance levels of mammographic practice in Serbia, i. e. result in the production of high quality images with a reasonably low radiation risk to patients.

  20. Integration of Photovoltaics in Buildings—Support Policies Addressing Technical and Formal Aspects

    Directory of Open Access Journals (Sweden)

    Thorsten Schuetze

    2013-06-01

    Full Text Available The integration of photovoltaic (PV generators in the envelope of a building by means of building-integrated photovoltaics (BIPV offers an immense potential, both in market development and the production of renewable electric energy that is close to the point of electricity consumption. In Germany, for example, by integrating photovoltaics in buildings up to 50% of the electricity demand can be covered. The political support of BIPV would contribute to the development and installation of BIPV components and therefore also promote the development of new business areas for industries dealing with components used in building envelopes and photovoltaic generators. BIPV can be separated into three different integration types: “technical”, “formal” and “technical & formal”. Political instruments for the support of PV-installations, particularly BIPV are discussed in this paper using Germany and France as examples. Due to successful financial support policies, PV became the most powerful electricity production technology in Germany. In France, the unique financial support of BIPV is resulting in an exemplary development and growth of certified BIPV components available on the market and, from a technical, aesthetic architectural and legal certainty point of view, facilitating the easy and widespread integration of photovoltaic generators in buildings.

  1. Technical and Economic Aspects of Designing an Efficient Room Air-Conditioner Program in India

    Energy Technology Data Exchange (ETDEWEB)

    Abhyankar, Nikit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Shah, Nihar [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Phadke, Amol [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Park, Won Young [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.

    2017-09-05

    Several studies have projected a massive increase in the demand for air conditioners (ACs) over the next two decades in India. By 2030, room ACs could add 140 GW to the peak load, equivalent to over 30% of the total projected peak load. Therefore, there is significant interest among policymakers, regulators, and utilities in managing room AC demand by enhancing energy efficiency. Building on the historical success of the Indian Bureau of Energy Efficiency’s star-labeling program, Energy Efficiency Services Limited recently announced a program to accelerate the sale of efficient room ACs using bulk procurement, similar to their successful UJALA light-emitting diode (LED) bulk procurement program. This report discusses some of the key considerations in designing a bulk procurement or financial incentive program for enhancing room AC efficiency in India. We draw upon our previous research to demonstrate the overall technical potential and price impact of room AC efficiency improvement and its technical feasibility in India. We also discuss the importance of using low global warming potential (GWP) refrigerants and smart AC equipment that is demand response (DR) ready.

  2. An update on technical and methodological aspects for cardiac PET applications

    International Nuclear Information System (INIS)

    PRESOTTO, Luca; BUSNARDO, Elena; GIANOLLI, Luigi; BETTINARDI, Valentino

    2016-01-01

    Positron emission tomography (PET) is indicated for a large number of cardiac diseases: perfusion and viability studies are commonly used to evaluate coronary artery disease; PET can also be used to assess sarcoidosis and endocarditis, as well as to investigate amyloidosis. Furthermore, a hot topic for research is plaque characterization. Most of these studies are technically very challenging. High count rates and short acquisition times characterize perfusion scans while very small targets have to be imaged in inflammation/infection and plaques examinations. Furthermore, cardiac PET suffers from respiratory and cardiac motion blur. Each type of studies has specific requirements from the technical and methodological point of view, thus PET systems with overall high performances are required. Furthermore, in the era of hybrid PET/computed tomography (CT) and PET/Magnetic Resonance Imaging (MRI) systems, the combination of complementary functional and anatomical information can be used to improve diagnosis and prognosis. Moreover, PET images can be qualitatively and quantitatively improved exploiting information from the other modality, using advanced algorithms. In this review we will report the latest technological and methodological innovations for PET cardiac applications, with particular reference to the state of the art of the hybrid PET/CT and PET/MRI. We will also report the most recent advancements in software, from reconstruction algorithms to image processing and analysis programs.

  3. Scientific and technical aspects of Chernobyl; Naukovyi ta tekhnyichnyi aspekti Chornobilya

    Energy Technology Data Exchange (ETDEWEB)

    Gligalo, V M; Nosovs' kij, A V [eds.

    2002-07-01

    The collection contains the presentations and scientific articles prepared for and discussed during the Conference titled '2001: International Cooperation For Chernobyl'. The materials outline the outcomes achieved while implementing Chernobyl site scientific-technical researches and projects, as well as activities aimed at enhancing the ChNPP safety, decommissioning and radwaste management. It also highlights the issues related to transforming the Unit Shelter into an ecologically safe system, represents the results of ecological researches in the Exclusion Zone, medical effects of the 1986 accident at Chernobyl NPP, together with social and economic problems the city of Slavutich faces now due to the early ChNPP Units decommissioning, and Slavutich business development opportunities under the circumstances of Special Economic Zone 'Slavutich'.

  4. Technical, economical and legal aspects of repatriation of Russian-origin research reactor SNF to Russia

    International Nuclear Information System (INIS)

    Smirnov, A.; Kanashov, B.; Efarov, S.; Lebedev, A.; Kolupaev, D.

    2005-01-01

    The aim of the report is to find some principal decisions to implement an Agreement between the Governments of the Russian Federation and the USA on repatriation of the research reactor spent nuclear fuel (RR SNF) to the Russian Federation. The report presents some ideas and approaches to the transportation of the Russian-origin RR SNF from the technical, economical and legal viewpoints. The report summarizes the Russian experience and possibilities to fulfill the program under the Agreement. Some decisions are proposed related to application of the international transportation experience and the most advanced technologies for the RR SNF handling. At present, there is no any unified SNF transportation technology that is capable to implement the transportation program schedule set by the Agreement. The decision is in the comprehensive approach as well as in the development of mobile and flexible schemes and in implementation of parallel and combined shipments. (author)

  5. Technical, economical and environmental aspects of the production of biodiesel in Italy

    International Nuclear Information System (INIS)

    Camaggio, G.; Paiano, A.; Tricase, C.

    2006-01-01

    The events of the last years have put under the spotlight the politic and economic instability of the energy sources from crude oil. This has brought to the necessity to exploit alternative sources, such as bio fuels. It is possible to suppose for Italy, for a long time dependent from abroad energy supplying, that the development of biofuel industry will be an opportunity, also thanks to its background agriculture: it can rise, in fact, to an important role, thanks to biomass energy exploitation. In this paper will be made an analysis about the material and energy flows of the entire production chain of biodiesel obtained from sunflower, in order to evaluate its potential from technical, economic and environmental point of view

  6. Experience in isotope leak-proof control of engineering objects - technical and economical aspects

    International Nuclear Information System (INIS)

    Kras, J.; Walis, L.; Myczkowski, S.

    2002-01-01

    One of the basic uses of the tracer methods for commercial purposes is the leak-proof control and determination of location of possible leakages in engineering objects. The works in this area - development of methods and equipment, and its practical use - are being conducted at the Institute of Nuclear Chemistry and Technology in Warsaw. The paper presents the division of engineering objects according to their suitability for leak proof testing with tracer methods, alternative traditional methods, sensitivity levels and the technical effects achieved with both method groups, plus the attempts to determine the economical effects of the tracer method. The introduction to the paper describes the method of field preparation of gaseous radioactive tracer, i.e. methyl bromide CH 3 Br labelled with bromine 82 Br isotope. (author)

  7. [The LESS (Laparo-endoscopic Single-Site) procedure in urology. Technical and clinical aspects].

    Science.gov (United States)

    Neri, F; Cindolo, L; Gidaro, S; Schips, L

    2010-01-01

    Minimally invasive urology is rapidly advancing, and single-site laparoscopic surgery is being explored clinically. Such laparoscopic procedures are technically challenging and require an experienced laparoscopic surgeon due to the lack of port placement triangulation and instrument clashing. In the last years several surgeons all over the world have explored the feasibility and safety of LESS using several and different ports, approaches and devices. Hundreds of procedures have been described with overall favorable intraoperative and postoperative outcomes. Our experience consists of more than 30 procedures successfully completed for adrenal, kidney disease and varicocele. To date, LESS could be considered feasible and effective using currently available devices, however it is to be considered as an initial status technique requiring further confirmatory studies and advanced laparoscopic skills.

  8. Development of fast neutron therapy worldwide. Radiobiological, clinical and technical aspects

    International Nuclear Information System (INIS)

    Wambersie, A.; Richard, F.; Breteau, N.

    1994-01-01

    Radiobiological data indicate that fast neutrons could bring a benefit in the treatment of some tumour types, and suggest mechanisms through which this benefit could be achieved. However, radiobiology also clearly indicates that there is a need for patient selection as well as for a high-physical selectivity. The main difficulty when interpreting the results of neutron therapy are the poor technical conditions in which the first treatments were applied. This explains why the value and the place of neutron therapy are not universally recognized, although more than 15000 patients have been treated so far worldwide. There are, however, clinical indications of fast neutrons bringing a benefit for the following tumour sites: salivary glands, paranasal sinuses, soft tissue sarcomas, prostatic adenocarcinomas, palliative treatment of melanoma and rectum. These tumours represent about 10-15% of all patients currently referred to the radiation therapy departments. (orig.)

  9. AREVA Technical Days (ATD) session 3: operations of the reactors and services division, technical and economic aspects; AREVA Technical Days (ATD) session 3: les activites du pole reacteurs et services, aspects techniques et economiques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This third session deals with the reactors technologies basics, the EPR and SWR 1000 issues and outlook, the nuclear systems of the future, the business opportunities and business models. (A.L.B.)

  10. Preservation of Records, Knowledge and Memory across Generations (RK and M). Monitoring of Geological Disposal Facilities - Technical and Societal Aspects

    International Nuclear Information System (INIS)

    2014-01-01

    The OECD Nuclear Energy Agency (NEA) Radioactive Waste Management Committee (RWMC) Project on 'Preservation of Records, Knowledge and Memory across generations (RK and M)' (2011-2014) explores and aims to develop guidance on regulatory, policy, managerial, and technical aspects of long-term preservation of records, knowledge and memory of deep geological disposal facilities. While official responsibility for the preservation of records, knowledge and memory must remain with institutions, it is likely that local communities do or will have an important pragmatic role in maintaining the memory of a repository, e.g., by engaging at some level in its continued oversight. Monitoring - by collecting, interpreting and keeping data on a continuous basis - would serve the purpose of preserving records, knowledge and memory and continuous oversight. In order to tackle the subject it is important, on the one hand, to describe the role of monitoring in a technical perspective and, on the other, to understand the expectations of local stakeholders regarding monitoring. The present study report should therefore meet three objectives: - To present in a comprehensive way the general monitoring information, practices and approaches used in the various national geological disposal programmes and elaborated in a number of international projects; - To explore the role, needs and expectations of local communities regarding monitoring and RK and M preservation of deep geological repositories; - Based on the above review, to identify lessons learned and the rationale for monitoring geological disposal projects throughout their life-cycle stages. This report is based on two studies: an NEA internal report entitled 'Monitoring of Geological Disposal Facilities (August 2013)' which provides an overview on technical aspects of monitoring and an NEA public report entitled 'Local Communities' Expectations and Demands on Monitoring and the Preservation of Records, Knowledge and Memory of a Deep

  11. Practice for the upgrading of Trino Vercellese NPP: Technical and economical aspects

    International Nuclear Information System (INIS)

    Giangrasso, M.; Maresca, G.; Pino, G.; Sano, T.

    1993-01-01

    In this report the experience gained in seismic re-evaluation of an old NPP (Trino Vercellese) is described. This PWR plant was not seismically designed. The main purpose of the upgrading, from the point of view of the Italian Directorate for Nuclear Safety - ENEA/DISP, was to have guaranteed the plant capability of achieving and maintaining a safe cold shutdown condition after a SSE seismic event. The main steps of the seismic review are discussed: definition of the new input motion; selection of structures, systems and components essential for a safe cold shutdown; definition of Codes and evaluation methods; seismic qualification of systems and components. Finally some modifications of a number of plant systems are described together with economical aspects. (author)

  12. Introducing Technical Aspects of Research Data Management in the Leipzig Health Atlas.

    Science.gov (United States)

    Meineke, Frank A; Löbe, Matthias; Stäubert, Sebastian

    2018-01-01

    Medical research is an active field in which a wide range of information is collected, collated, combined and analyzed. Essential results are reported in publications, but it is often problematic to have the data (raw and processed), algorithms and tools associated with the publication available. The Leipzig Health Atlas (LHA) project has therefore set itself the goal of providing a repository for this purpose and enabling controlled access to it via a web-based portal. A data sharing concept in accordance to FAIR and OAIS is the basis for the processing and provision of data in the LHA. An IT architecture has been designed for this purpose. The paper presents essential aspects of the data sharing concept, the IT architecture and the methods used.

  13. Technical and economical aspects of mass spectrometry in food and agricultural industries

    International Nuclear Information System (INIS)

    Cornu, Ayme

    1975-01-01

    Mass spectrometry proved to be very useful for solving analytical problems in food and agricultural industries. Its essential properties are: high resolution mass spectrometry allows to find the molecular structure of an isolated compound, even with a very small sample; associated with on line gas chromatographic separation, it gives the possibility to identify a great number of components in a small complex extract; isotope determinations by mass spectrometry give an essential contribution to follow kinetic mechanisms of formation of natural molecules in plant-growing, photosynthesis, fertilization, ..., leading to identification of the origin of foods and beverages. The economical aspect of mass spectrometry is characterized by the cost of investment in instrumentation and the necessary high level of competence of the technicians [fr

  14. Role of the Technical Aspects of Hypofractionated Radiation Therapy Treatment of Prostate Cancer: A Review

    Energy Technology Data Exchange (ETDEWEB)

    Clemente, Stefania, E-mail: clemente_stefania@libero.it [Istituto di Ricovero e Cura a Carattere Scientifico Centro di Riferimento Oncologico della Basilicata Rionero in Vulture, Potenza (Italy); Nigro, Roberta [Azienda Sanitaria Locale Rieti, Roma (Italy); Oliviero, Caterina [Istituto di Ricovero e Cura a Carattere Scientifico Centro di Riferimento Oncologico della Basilicata Rionero in Vulture, Potenza (Italy); Marchioni, Chiara [Azienda Sanitaria Locale Rieti, Roma (Italy); Esposito, Marco [Azienda Sanitaria, Firenze (Italy); Giglioli, Francesca Romana [Azienda Ospedaliera Città della Salute e della Scienza di Torino, Torino (Italy); Mancosu, Pietro [Humanitas Clinical and Research Hospital, Rozzano, Milano (Italy); Marino, Carmelo [Humanitas Centro Catanese di Oncologia, Catania (Italy); Russo, Serenella [Azienda Sanitaria, Firenze (Italy); Stasi, Michele [Azienda Ospedaliera Ordine Mauriziano di Torino, Torino (Italy); Strigari, Lidia [Istituto Nazionale Tumori Regina Elena, Roma (Italy); Veronese, Ivan [Universita' degli Studi di Milano, Milano (Italy); Landoni, Valeria [Istituto Nazionale Tumori Regina Elena, Roma (Italy)

    2015-01-01

    The increasing use of moderate (<35 fractions) and extreme (<5 fractions) hypofractionated radiation therapy in prostate cancer is yielding favorable results, both in terms of maintained biochemical response and toxicity. Several hypofractionation (HF) schemes for the treatment of prostate cancer are available, although there is considerable variability in the techniques used to manage intra-/interfraction motion and deliver radiation doses. We performed a review of the published studies on HF regimens as a topic of interest for the Stereotactic Ablative Radiotherapy working group, which is part of the Italian Association of Medical Physics. Aspects of organ motion management (imaging for contouring, target volume definition, and rectum/bladder preparation) and treatment delivery (prostate localization, image guided radiation therapy strategy and frequency) were evaluated and categorized to assess outcome relative to disease control and toxicity. Despite the heterogeneity of the data, some interesting trends that emerged from the review might be useful in identifying an optimum HF strategy.

  15. CT-guided Bipolar and Multipolar Radiofrequency Ablation (RF Ablation) of Renal Cell Carcinoma: Specific Technical Aspects and Clinical Results

    International Nuclear Information System (INIS)

    Sommer, C. M.; Lemm, G.; Hohenstein, E.; Bellemann, N.; Stampfl, U.; Goezen, A. S.; Rassweiler, J.; Kauczor, H. U.; Radeleff, B. A.; Pereira, P. L.

    2013-01-01

    Purpose. This study was designed to evaluate the clinical efficacy of CT-guided bipolar and multipolar radiofrequency ablation (RF ablation) of renal cell carcinoma (RCC) and to analyze specific technical aspects between both technologies. Methods. We included 22 consecutive patients (3 women; age 74.2 ± 8.6 years) after 28 CT-guided bipolar or multipolar RF ablations of 28 RCCs (diameter 2.5 ± 0.8 cm). Procedures were performed with a commercially available RF system (Celon AG Olympus, Berlin, Germany). Technical aspects of RF ablation procedures (ablation mode [bipolar or multipolar], number of applicators and ablation cycles, overall ablation time and deployed energy, and technical success rate) were analyzed. Clinical results (local recurrence-free survival and local tumor control rate, renal function [glomerular filtration rate (GFR)]) and complication rates were evaluated. Results. Bipolar RF ablation was performed in 12 procedures and multipolar RF ablation in 16 procedures (2 applicators in 14 procedures and 3 applicators in 2 procedures). One ablation cycle was performed in 15 procedures and two ablation cycles in 13 procedures. Overall ablation time and deployed energy were 35.0 ± 13.6 min and 43.7 ± 17.9 kJ. Technical success rate was 100 %. Major and minor complication rates were 4 and 14 %. At an imaging follow-up of 15.2 ± 8.8 months, local recurrence-free survival was 14.4 ± 8.8 months and local tumor control rate was 93 %. GFR did not deteriorate after RF ablation (50.8 ± 16.6 ml/min/1.73 m 2 before RF ablation vs. 47.2 ± 11.9 ml/min/1.73 m 2 after RF ablation; not significant). Conclusions. CT-guided bipolar and multipolar RF ablation of RCC has a high rate of clinical success and low complication rates. At short-term follow-up, clinical efficacy is high without deterioration of the renal function.

  16. CT-guided Bipolar and Multipolar Radiofrequency Ablation (RF Ablation) of Renal Cell Carcinoma: Specific Technical Aspects and Clinical Results

    Energy Technology Data Exchange (ETDEWEB)

    Sommer, C. M., E-mail: christof.sommer@med.uni-heidelberg.de [University Hospital Heidelberg, INF 110, Department of Diagnostic and Interventional Radiology (Germany); Lemm, G.; Hohenstein, E. [Minimally Invasive Therapies and Nuclear Medicine, SLK Kliniken Heilbronn GmbH, Clinic for Radiology (Germany); Bellemann, N.; Stampfl, U. [University Hospital Heidelberg, INF 110, Department of Diagnostic and Interventional Radiology (Germany); Goezen, A. S.; Rassweiler, J. [Clinic for Urology, SLK Kliniken Heilbronn GmbH (Germany); Kauczor, H. U.; Radeleff, B. A. [University Hospital Heidelberg, INF 110, Department of Diagnostic and Interventional Radiology (Germany); Pereira, P. L. [Minimally Invasive Therapies and Nuclear Medicine, SLK Kliniken Heilbronn GmbH, Clinic for Radiology (Germany)

    2013-06-15

    Purpose. This study was designed to evaluate the clinical efficacy of CT-guided bipolar and multipolar radiofrequency ablation (RF ablation) of renal cell carcinoma (RCC) and to analyze specific technical aspects between both technologies. Methods. We included 22 consecutive patients (3 women; age 74.2 {+-} 8.6 years) after 28 CT-guided bipolar or multipolar RF ablations of 28 RCCs (diameter 2.5 {+-} 0.8 cm). Procedures were performed with a commercially available RF system (Celon AG Olympus, Berlin, Germany). Technical aspects of RF ablation procedures (ablation mode [bipolar or multipolar], number of applicators and ablation cycles, overall ablation time and deployed energy, and technical success rate) were analyzed. Clinical results (local recurrence-free survival and local tumor control rate, renal function [glomerular filtration rate (GFR)]) and complication rates were evaluated. Results. Bipolar RF ablation was performed in 12 procedures and multipolar RF ablation in 16 procedures (2 applicators in 14 procedures and 3 applicators in 2 procedures). One ablation cycle was performed in 15 procedures and two ablation cycles in 13 procedures. Overall ablation time and deployed energy were 35.0 {+-} 13.6 min and 43.7 {+-} 17.9 kJ. Technical success rate was 100 %. Major and minor complication rates were 4 and 14 %. At an imaging follow-up of 15.2 {+-} 8.8 months, local recurrence-free survival was 14.4 {+-} 8.8 months and local tumor control rate was 93 %. GFR did not deteriorate after RF ablation (50.8 {+-} 16.6 ml/min/1.73 m{sup 2} before RF ablation vs. 47.2 {+-} 11.9 ml/min/1.73 m{sup 2} after RF ablation; not significant). Conclusions. CT-guided bipolar and multipolar RF ablation of RCC has a high rate of clinical success and low complication rates. At short-term follow-up, clinical efficacy is high without deterioration of the renal function.

  17. TECHNICAL ASPECTS RELATED TO THE APPLICATION OF SFM PHOTOGRAMMETRY IN HIGH MOUNTAIN

    Directory of Open Access Journals (Sweden)

    M. Scaioni

    2018-05-01

    Full Text Available Structure-from-Motion (SfM photogrammetry is a flexible and powerful tool to provide 3D point clouds describing the surface of objects. Due to the easy transportability and low-cost of necessary equipment with respect to laser scanning techniques, SfM photogrammetry has great potential to be applied in harsh high-mountain environment. Here point clouds and derived by-products (DEM’s, orthoimages, Virtual-Reality models are needed to document surface morphology and to investigate dynamic processes such as landslides, avalanches, river and soil erosion, glacier retreat. On the other hand, from both the literature and the direct experience of the authors, there are some technical issues that still deserve thorough investigations. The paper would like to address some open problems and suggest solutions, in particular on regards of the photogrammetric network design, the strategy for georeferencing the final products, and for their comparison within time. The discussion is documented with some examples, mainly from surveying campaigns at the Forni Glacier in Italian Alps.

  18. Technical Aspects on the Use of Ultrasonic Bone Shaver in Spine Surgery: Experience in 307 Patients

    Directory of Open Access Journals (Sweden)

    Derya Burcu Hazer

    2016-01-01

    Full Text Available Aim. We discuss technical points, the safety, and efficacy of ultrasonic bone shaver in various spinal surgeries within our own series. Methods. Between June 2010 and January 2014, 307 patients with various spinal diseases were operated on with the use of an ultrasonic bone curette with microhook shaver (UBShaver. Patients’ data were recorded and analyzed retrospectively. The technique for the use of the device is described for each spine surgery procedure. Results. Among the 307 patients, 33 (10.7% cases had cervical disorder, 17 (5.5% thoracic disorder, 3 (0.9% foramen magnum disorder, and 254 (82.7% lumbar disorders. Various surgical techniques were performed either assisted or alone by UBShaver. The duration of the operations and the need for blood replacement were relatively low. The one-year follow-up with Neck Disability Index (NDI and Oswestry Disability Index (ODI scores were improved. We had 5 cases of dural tears (1.6% in patients with lumbar spinal disease. No neurological deficit was found in any patients. Conclusion. We recommend this device as an assistant tool in various spine surgeries and as a primary tool in foraminotomies. It is a safe device in spine surgery with very low complication rate.

  19. Mobile CT. Technical aspects of prehospital stroke imaging before intravenous thrombolysis

    International Nuclear Information System (INIS)

    Gierhake, Daniel; Villringer, K.; Fiebach, J.B.; Weber, J.E.; Audebert, H.J.; Charite - Universitaetsmedizin Berlin; Ebinger, M.; Charite - Universitaetsmedizin Berlin

    2013-01-01

    To reduce the time from symptom onset to treatment with tissue plasminogen activator (tPA) in ischemic stroke, an ambulance was equipped with a CT scanner. We analyzed process and image quality of CT scanning during the pilot study regarding image quality and safety issues. The pilot study of a stroke emergency mobile unit (STEMO) ran over a period of 12 weeks on 5 weekdays from 7a. m. to 6:30 p. m. A teleradiological service for the justifying indication and reporting was established. The radiographer was responsible for the performance of the CT scan on the ambulance. 64 cranial CT scans and 1 intracranial CT angiography were performed. We compared times from ambulance alarm to treatment decision (time of last brain scan) with a cohort of 50 consecutive tPA treatments before implementation of STEMO. 62 (95 %) of the 65 scans performed had sufficient quality for reading. Technical quality was not optimal in 45 cases (69 %) mainly caused by suboptimal positioning of patient or eye lense protection. Motion artefacts were observed in 8 exams (12 %). No safety issues occurred for team or patients. 23 patients were treated with thrombolysis. Time from alarm to last CT scan was 18 minutes shorter than in the tPA cohort before STEMO implementation. A teleradiological support for primary stroke imaging by CT on-site is feasible, quality-wise of diagnostic value and has not raised safety issues. (orig.)

  20. Technical and economic aspects of operation of thermal and hydro power systems

    Energy Technology Data Exchange (ETDEWEB)

    Bakken, Bjoern Harald

    1997-12-31

    This thesis studies system operation and operational costs of primary and secondary control in hydro and thermal power systems. The cost of providing primary control reserves in thermal power systems is estimated to 1-3% of total production cost. Hydro power units, on the other hand, provide a very cheap primary reserve compared to thermal units. The HVDC (High Voltage Direct Current) connection can be used for primary control in either direction but the thesis only considers substitution of reserves in the thermal system with reserves from the hydro system. Since the HVDC connection is easy to control, the transient characteristics are considerably improved, and one can substitute an amount of thermal spinning reserve corresponding to the available HVDC capacity with little disturbance in any system. A more realistic alternative, at present, is to sell secondary control reserves across the HVDC connections. Keeping spinning reserve for automatic secondary control in a thermal power system is estimated to cost 3-5% of total production cost. Secondary control reserves probably cannot compete with the value of the peak load export, but one should seriously consider using part of the HVDC capacity as secondary control reserve for the thermal system during off-peak hours with. The author discusses the concept of automatic secondary control both theoretically and by simulations and finds that there are no special technical difficulties in introducing automatic secondary control in the Nordel (an organization for Nordic power cooperation) system. 78 refs., 4 figs., 23 tabs.

  1. Technical and economic aspects of operation of thermal and hydro power systems

    Energy Technology Data Exchange (ETDEWEB)

    Bakken, Bjoern Harald

    1998-12-31

    This thesis studies system operation and operational costs of primary and secondary control in hydro and thermal power systems. The cost of providing primary control reserves in thermal power systems is estimated to 1-3% of total production cost. Hydro power units, on the other hand, provide a very cheap primary reserve compared to thermal units. The HVDC (High Voltage Direct Current) connection can be used for primary control in either direction but the thesis only considers substitution of reserves in the thermal system with reserves from the hydro system. Since the HVDC connection is easy to control, the transient characteristics are considerably improved, and one can substitute an amount of thermal spinning reserve corresponding to the available HVDC capacity with little disturbance in any system. A more realistic alternative, at present, is to sell secondary control reserves across the HVDC connections. Keeping spinning reserve for automatic secondary control in a thermal power system is estimated to cost 3-5% of total production cost. Secondary control reserves probably cannot compete with the value of the peak load export, but one should seriously consider using part of the HVDC capacity as secondary control reserve for the thermal system during off-peak hours with. The author discusses the concept of automatic secondary control both theoretically and by simulations and finds that there are no special technical difficulties in introducing automatic secondary control in the Nordel (an organization for Nordic power cooperation) system. 78 refs., 4 figs., 23 tabs.

  2. Technical and economic aspects of operation of thermal and hydro power systems

    International Nuclear Information System (INIS)

    Bakken, Bjoern Harald.

    1997-01-01

    This thesis studies system operation and operational costs of primary and secondary control in hydro and thermal power systems. The cost of providing primary control reserves in thermal power systems is estimated to 1-3% of total production cost. Hydro power units, on the other hand, provide a very cheap primary reserve compared to thermal units. The HVDC (High Voltage Direct Current) connection can be used for primary control in either direction but the thesis only considers substitution of reserves in the thermal system with reserves from the hydro system. Since the HVDC connection is easy to control, the transient characteristics are considerably improved, and one can substitute an amount of thermal spinning reserve corresponding to the available HVDC capacity with little disturbance in any system. A more realistic alternative, at present, is to sell secondary control reserves across the HVDC connections. Keeping spinning reserve for automatic secondary control in a thermal power system is estimated to cost 3-5% of total production cost. Secondary control reserves probably cannot compete with the value of the peak load export, but one should seriously consider using part of the HVDC capacity as secondary control reserve for the thermal system during off-peak hours with. The author discusses the concept of automatic secondary control both theoretically and by simulations and finds that there are no special technical difficulties in introducing automatic secondary control in the Nordel (an organization for Nordic power cooperation) system. 78 refs., 4 figs., 23 tabs

  3. Metachronous medulloblastoma and glioblastoma: Implications for clinical and technical aspects of re-irradiation.

    Science.gov (United States)

    Verma, Vivek; Kulkarni, Rajesh R; Bhirud, Abhijeet R; Bennion, Nathan R; McComb, Rodney D; Lin, Chi

    2016-01-01

    A seven-year-old male underwent surgical resection and chemoradiation for average risk medulloblastoma; twelve years later, the presence of a necrotic and infiltrative mass in the same area and invading the brainstem prompted a subtotal resection. Pathology was indicative of glioblastoma. He was then treated with concurrent temozolomide and using biologically effective dose calculations for gross residual tumor tissue in the brainstem as well as brainstem tolerance, a radiotherapy dose of 3750 cGy was chosen, fractionated in twice-daily fractions of 125 cGy each. The gross tumor volume was expanded with a 5 mm margin to the planning target volume, which was also judiciously subtracted from the normal brainstem. He completed his radiotherapy course with subsequent imaging free of residual tumor and continued adjuvant temozolomide and remains under follow-up surveillance. This case underscores the rarity of metachronous medulloblastoma and glioblastoma, of which only five known cases heretofore have been described. We discuss the technicalities of radiotherapy planning in this patient, including common hurdles for radiation oncologists in similar patients.

  4. Critical revision of the technical aspects of sanitation of the Bogota river 1994 project

    International Nuclear Information System (INIS)

    Giraldo Eugenio

    1996-01-01

    A moral obligation exists on the part of the human societies of having designed to remove the contamination the environment that has been commended to manage and that it represents the inheritance that guarantees the survival of the species in the earth planet. It exists a growing recognition of this imperious necessity at the present time on the part of all the societies in the world that immediately opens the roads for the political exploitation of so praiseworthy feelings. Paradoxically, the environmentalist feelings don't always redound in a better protection for the nature and the environment, natural or urban. The reparation plan to continue for the Decontamination of the Bogot River; hired by the concession system the first stage of the same one, it is summarized in making three plants of treatment of located residual waters, each one of them in the outlets on the Bogota river of the main basins of drainage of the sanitary sewer system of the city. The treatment plants are of a conventional technology, mud activated that basically are designed to remove 90% of the contamination for organic matter that takes the sanitary sewer system of the respective basin. This level of achieved treatment is denominated in the technical literature as secondary treatment

  5. Overview and technical and practical aspects for use of geostatistics in hazardous-, toxic-, and radioactive-waste-site investigations

    International Nuclear Information System (INIS)

    Bossong, C.R.; Karlinger, M.R.; Troutman, B.M.; Vecchia, A.V.

    1999-01-01

    Technical and practical aspects of applying geostatistics are developed for individuals involved in investigation at hazardous-, toxic-, and radioactive-waste sites. Important geostatistical concepts, such as variograms and ordinary, universal, and indicator kriging, are described in general terms for introductory purposes and in more detail for practical applications. Variogram modeling using measured ground-water elevation data is described in detail to illustrate principles of stationarity, anisotropy, transformations, and cross validation. Several examples of kriging applications are described using ground-water-level elevations, bedrock elevations, and ground-water-quality data. A review of contemporary literature and selected public domain software associated with geostatistics also is provided, as is a discussion of alternative methods for spatial modeling, including inverse distance weighting, triangulation, splines, trend-surface analysis, and simulation

  6. Energy from the desert. Very large scale photovoltaic systems: socio-economic, financial, technical and environmental aspects. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Kurokawa, K.; Ito, M.; Komoto, K.; Vleuten, P. van der; Faiman, D. (eds.)

    2009-05-15

    This executive summary report for the International Energy Agency (IEA) summarises the objectives and concepts of very large scale photovoltaic power generation (VLS-PV) systems and takes a look at the socio-economic, financial and technical aspects involved as well as the environmental impact of such systems. Potential benefits for desert communities, agricultural development and desalination of water are topics that are looked at. The potential of VLS-PV, its energy payback time and CO{sub 2} emission rates are discussed. Case studies for the Sahara and the Gobi Dessert areas are discussed. A VLS-PV roadmap is proposed and scenarios are discussed. Finally, conclusions are drawn and recommendations are made.

  7. Technical and economic aspects of new gaseous diffusion uranium enrichment capacity

    International Nuclear Information System (INIS)

    Langley, R.A. Jr.; O'Donnell, A.J.

    1977-01-01

    Work is well advanced on design and construction of the next major increment of U.S. uranium enrichment capacity. The plant will use the gaseous diffusion process to provide the required capacity and reliability at a competitive enrichment services cost. Gaseous diffusion technology is the base against which other processes are compared in order to assess their commercial viability. While it has generally been described as a mature technology with limited future development potential, work on design of the new U.S. plant has resulted in major improvement in plant design with corresponding decreases in plant capacity and operating costs. The paper describes major technological advances incorporated into the new plant design and their impact on enrichment costs. These include the effects of: - advanced barrier technology; - tandem compressor drive systems; - optimization of number of equipment sizes; - single level plant design; - development of rapid power level change capability; - electrical system simplification; - plant arrangement and layout. Resulting capital costs and projected enrichment costs are summarized. Enrichment costs are placed in the context of total nuclear fuel cycle costs. Trade-offs between uranium feed material quantities and enrichment plant tails assays are described, and optimization of this aspect of the nuclear fuel cycle is discussed. The effect on enrichment plant characteristics is described. Flexibility and capability of the new U.S. enrichment plant to meet these changing optimization conditions are described

  8. Computed tomography in multiple trauma patients. Technical aspects, work flow, and dose reduction

    International Nuclear Information System (INIS)

    Fellner, F.A.; Krieger, J.; Floery, D.; Lechner, N.

    2014-01-01

    Patients with severe, life-threatening trauma require a fast and accurate clinical and imaging diagnostic workup during the first phase of trauma management. Early whole-body computed tomography has clearly been proven to be the current standard of care of these patients. A similar imaging quality can be achieved in the multiple trauma setting compared with routine imaging especially using rapid, latest generation computed tomography (CT) scanners. This article encompasses a detailed view on the use of CT in patients with life-threatening trauma. A special focus is placed on radiological procedures in trauma units and on the methods for CT workup in routine cases and in challenging situations. Another focus discusses the potential of dose reduction of CT scans in multiple trauma as well as the examination of children with severe trauma. Various studies have demonstrated that early whole-body CT positively correlates with low morbidity and mortality and is clearly superior to the use of other imaging modalities. Optimal trauma unit management means a close cooperation between trauma surgeons, anesthesiologists and radiologists, whereby the radiologist is responsible for a rapid and accurate radiological workup and the rapid communication of imaging findings. However, even in the trauma setting, aspects of patient radiation doses should be kept in mind. (orig.) [de

  9. Technical and economic aspects of electron beam installations for treatment of flue gases from power plants

    International Nuclear Information System (INIS)

    Chmielewski, A.G.; Iller, E.; Frank, N.W.

    1998-01-01

    The emission of environmental pollutants such as SO 2 and NO x into atmosphere from heavy industrial activity, and in particular from fossil fuel burning in electricity production, is arousing increasing concern. One of the three areas of the world most affected by the resultant acid rain lies in eastern and central Europe includes Poland, parts of Germany, the Czech Republic and Slovakia. A major contribution to this pollution comes from the burning of poor quality pit and brown coal with a high sulphur content. These effects, as well as polluted air reaching Poland from other countries, have begun to damage forests and cause public health concerns in regions of high industrial density. Many countries around the world have started to impose industrial emission limits and this move has generated renewed interest in finding viable and cost effective solutions to SO 2 and NO x pollution control. The conventional technologies - wet scrubbing for SO 2 and selective catalytic reduction for NO x now reached their full potential, these methods are not expected to provide further improvements in terms of efficiency or reduction in construction costs. A new technology being investigated for industrial scale commercial viability. One of them is the electron beam dry scrubbing process, which allows the simultaneous removal of SO 2 and NO x from industrial flue gases. The economical aspects of this technology are discussed in the presented paper

  10. Technical aspects in the obtention of tissue autoradiography using solid state nuclear track detectors

    International Nuclear Information System (INIS)

    Saint Martin, Gisela; Bernaola, Omar A.; Pozzi, Emiliano; Thorp, Silvia; Cabrini, Romulo L.; Tomasi, V.H.

    2007-01-01

    The autoradiography images produced in solid state nuclear track detectors by heavy ions originated in tissue provide relevant information about the spatial biodistribution of heavy particle emitters. Some preliminary aspects of the autoradiography technique are evaluated by two experiments which are in progress, using Lexan and CR 39 foils as solid state nuclear track detectors. In the first case, a tissue sample from rat kidney intoxicated with UO 2 (NO 3 ) 2 was embedded in paraffin and put in contact with a 1 mm thick CR 39 foil. After a two months exposure the foil was chemically developed resulting in scarce tracks. A satisfactory image cannot be obtained in these conditions. More prolonged exposure time is needed to obtain better images of such samples. The second experience consisted in the irradiation of fresh kidney tissue slices from healthy rats in contact with 250 μm thick Lexan foils, in a thermal neutrons flux. The irradiation was performed at the RA-3 facility of the Ezeiza Atomic Center (CAE). The contribution to image produced by tracks of particles due to reactions between neutrons and tissue elements (i.e. 14 N) was evaluated. The etching conditions should be modified in order to desensitize the detector material. (author) [es

  11. Technical and tactical aspects in Italian youth rugby union in relation to different academies, regional tournaments, and outcomes.

    Science.gov (United States)

    Ungureanu, Alexandru Nicolae; Condello, Giancarlo; Pistore, Simonluca; Conte, Daniele; Lupo, Corrado

    2017-08-15

    This study aimed to analyze the technical and tactical aspects of the Italian under-18 Academy Rugby Union in relation to different academies, regional tournaments, and game outcomes. A notational analysis (forty-four indicators) was performed on 16 games (2014-15 season) to evaluate strong differences (P ≤ 0.05; moderate-large effect sizes) according to variables. Among academies, strong differences were showed for defensive breakdown where the defending support is much (range=77-87%), equal (range=11-32%), and less (range=2-12%) numerous than the attacking support, total tackles (range=64-122) and passes (range=72-151), pass to possession ratio (range=6-10), possession lost due to an error (range=28-59%), and ball in play in own (range=8-25%) and opponent (range=7-31%) 22m area indicators. For tournaments, effects emerged for offensive breakdown when the ball is used quickly employing maximum 2 attacking supports (range=20-30%) and is not used quickly (range=28-41%), total penalty kicks (range=11-16), and sequences period 0-10 (range=26-35%) and 10-40 s (range=47-55%). Conversely, winning and losing academies reported differences with small effect sizes. These results highlight that the technical and tactical aspects of the Italian under-18 Academy Rugby Union are quite homogeneous, suggesting that FIR coaching staffs are more oriented to players' skills than successful games. However, tactical, and strength and conditioning coaches can benefit from the findings of this study, focusing training on cognitive, strength, and repeated sprint abilities with and without change of direction for improving the occurrence of "set pieces won/regained" and "ball in play in opponent 22m area", which appear as the key of the game in this rugby competition level.

  12. Perspectives for the production of bioethanol from wood and straw in Austria: technical, economic, and ecological aspects

    Energy Technology Data Exchange (ETDEWEB)

    Kravanja, Philipp; Friedl, Anton [Vienna University of Technology, Thermal Process Engineering-Process Simulation, Institute of Chemical Engineering, Wien (Austria); Koenighofer, Kurt; Canella, Lorenza; Jungmeier, Gerfried [Joanneum Research Forschungsgesellschaft mbH - Resources, Graz (Austria)

    2012-06-15

    Bioethanol produced from lignocellulosic resources is a promising candidate for the replacement of fossil fuels. In this study, we aim to determine the perspectives to produce lignocellulosic ethanol in Austria. Technical, environmental and economic aspects are being considered. Thirteen biotechnological production concepts using the raw materials straw and softwood were established and simulated with the steady state flowsheeting software IPSEpro. Bioethanol production cost and greenhouse gas (GHG) emissions for each system were calculated based on mass and energy balances obtained from process simulation. The emission of GHGs along the entire bioethanol process chain (''from well to wheel'') are compared to two reference systems producing the same amounts of by-products. In all concepts, process heat and considerable amounts of the by-products electricity, heat, pellets, C5 molasses, or biomethane could be obtained from residual biomass. Compared to a reference system driven by fossil energy, GHG emissions can be reduced by up to 76%. The production cost of ethanol was found to between 0.66 EUR and 0.94 EUR per liter of gasoline equivalent. The type and amount of by-product influence technical, economic, and environmental performance significantly. Converting all straw and softwood available in Austria to ethanol would result in an annual production of 340 kt. (orig.)

  13. Mammography practice in Serbia: Evaluation and optimisation of image quality and the technical aspects of the mammographic imaging chain

    International Nuclear Information System (INIS)

    Kosutic, D.; Ciraj-Bjelac, O.; Arandjic, D.

    2010-01-01

    The purpose of this work was to assess mammography practice in Serbia and its appropriateness for both diagnostic service and potential screening by implementing quality control (QC) protocol in three large teaching hospitals. Corrective actions were suggested, accordingly. In addition to technical aspects of QC, image quality was assessed using image grading before and after the introduction of corrective measures. The survey demonstrated considerable variations in technical parameters that affect image quality and patients doses. Average glandular doses ranged from 1.8 to 2.8 mGy, while reference optical density (OD) ranged from 1.0 to 2.6. Image grading resulted in a very high percentage of images with poor quality (12-70% for cranio-caudal projection and 8-66% for medio-lateral oblique projection). Main problems were associated with film processing, viewing conditions and OD control. Following introduction of corrective measures, the image grading results were improved in some hospitals, so the percentage of images without any remarks has been increased. (authors)

  14. Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, Paolo, E-mail: paolo.rossi@enea.it [ENEA, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Cucchiaro, A.; Brolatti, G.; Cocilovo, V.; Ginoulhiac, G.; Polli, G. [ENEA, Via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Gabriele, M.; Di Muzio, F. [Walter Tosto, Via Erasmo Piaggio, 66100 Chieti (Italy); Philips, G.; Tomarchio, V. [JT-60SA European Home Team, Boltzmannstrasse 2, D-85748 Garching (Germany)

    2014-10-15

    wings welded to a central core for a final shape of “D”. Other supports are welded by TIG or Electrode process. This paper describes the technical design solutions, the manufacturing methods defined and the particular processes adopted, such as welding (EB, TIG), non-destructive examinations (NDE), vibration stress relief (VSR) and laser tracker survey, most of which have been validated by the construction of two different sets of full scale mock-ups representing the straight and the curved legs.

  15. Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings

    International Nuclear Information System (INIS)

    Rossi, Paolo; Cucchiaro, A.; Brolatti, G.; Cocilovo, V.; Ginoulhiac, G.; Polli, G.; Gabriele, M.; Di Muzio, F.; Philips, G.; Tomarchio, V.

    2014-01-01

    wings welded to a central core for a final shape of “D”. Other supports are welded by TIG or Electrode process. This paper describes the technical design solutions, the manufacturing methods defined and the particular processes adopted, such as welding (EB, TIG), non-destructive examinations (NDE), vibration stress relief (VSR) and laser tracker survey, most of which have been validated by the construction of two different sets of full scale mock-ups representing the straight and the curved legs

  16. Platform development for merging various information sources for water management: methodological, technical and operational aspects

    Science.gov (United States)

    Galvao, Diogo

    2013-04-01

    As a result of various economic, social and environmental factors, we can all experience the increase in importance of water resources at a global scale. As a consequence, we can also notice the increasing need of methods and systems capable of efficiently managing and combining the rich and heterogeneous data available that concerns, directly or indirectly, these water resources, such as in-situ monitoring station data, Earth Observation images and measurements, Meteorological modeling forecasts and Hydrological modeling. Under the scope of the MyWater project, we developed a water management system capable of satisfying just such needs, under a flexible platform capable of accommodating future challenges, not only in terms of sources of data but also on applicable models to extract information from it. From a methodological point of view, the MyWater platform obtains data from distinct sources, and in distinct formats, be they Satellite images or meteorological model forecasts, transforms and combines them in ways that allow them to be fed to a variety of hydrological models (such as MOHID Land, SIMGRO, etc…), which themselves can also be combined, using such approaches as those advocated by the OpenMI standard, to extract information in an automated and time efficient manner. Such an approach brings its own deal of challenges, and further research was developed under this project on the best ways to combine such data and on novel approaches to hydrological modeling (like the PriceXD model). From a technical point of view, the MyWater platform is structured according to a classical SOA architecture, with a flexible object oriented modular backend service responsible for all the model process management and data treatment, while the information extracted can be interacted with using a variety of frontends, from a web portal, including also a desktop client, down to mobile phone and tablet applications. From an operational point of view, a user can not only see

  17. Quality control devices for intraoperative gamma probes: physical, technical and radiation protection aspects

    International Nuclear Information System (INIS)

    Varela, C.; Diaz, M.; Salvador, F.J.; Hernandez, M.; Jimenez, P.

    2008-01-01

    Now a day, radio guided surgery -a novelty in Nuclear Medicine- is increasingly used. The clinical efficiency of these procedures requires the existence of well-trained professionals and implementation of quality assurance programs. It is essential for achieving the main objective, which is an effective and safe surgical procedure, a reliable performance of the detection device. Probes' parameters must remain within the acceptance limits, so they should be checked periodically. NEMA Standards Publication NU 3-2004 'Performance Measurement and Quality Control Guidelines for Non-Imaging Intraoperative Gamma Probes' recommends 13 tests; although only 3 of them -sensibility in air, visual inspection and power source check- are considered as steadiness tests. Space resolution in a scatter medium is also a test that needs to be carried out. These tests are considerably complex since open radioactive sources are used into a liquid medium in most of the procedures. The immersion of the probe and of the radioactive sources in each case represents both risks of radioactive contamination, and of damages to the equipment. On the other hand, tests in air demand a good reproducibility. Since they are recommended be carried out before any surgery procedure, they also should be easy and quick. This paper presents 3 devices with its accessories for acceptance and quality control tests of intraoperative gamma probes. They were designed and built taking into consideration important aspects of radiological protection to handle the calibration sources and probes, both in air and into a scatter medium. These devices are designed to fit any kind of probe. Regulatory bodies as part of their instrument audits can also use them. (author)

  18. Economic and Technical Aspects of Flexible Storage Photovoltaic Systems in Europe

    Directory of Open Access Journals (Sweden)

    Henrik Zsiborács

    2018-06-01

    Full Text Available Solar energy has an increasing role in the global energy mix. The need for flexible storage photovoltaic systems and energy storage in electricity networks is becoming increasingly important as more generating capacity uses solar and wind energy. This paper is a study on the economic questions related to flexible storage photovoltaic systems of household size in 2018. The aim is to clarify whether it is possible in the European Union to achieve a payback of the costs of flexible storage photovoltaic system investments for residential customers considering the technology-specific storage aspects prevalent in 2018. We studied seven different flexible storage photovoltaic investments with different battery technologies in Germany, France, Italy, and Spain because, in Europe, these countries have a prominent role with regard to the spread of photovoltaic technology. These investment alternatives are studied with the help of economic indicators for the different cases of the selected countries. At the end of our paper we come to the conclusion that an investment of a flexible storage photovoltaic (PV system with Olivine-type-LiFePO4, Lithium-Ion, Vented lead-acid battery (OPzS, Sealed lead-acid battery (OPzV, and Aqueous Hybrid Ion (AHI batteries can have a positive net present value due to the high electricity prices in Germany and in Spain. The most cost-effective technology was the Olivine-type-LiFePO4 and the Lithium-Ion at the time of the study. We suggest the provision of governmental support and uniform European modifications to the regulatory framework, especially concerning grid fees and tariffs, which would be necessary in the beginning to help to introduce these flexible storage PV systems to the market.

  19. Technical Aspects and Difficulties in the Management of Head and Neck Cutaneous Malignancies in Xeroderma Pigmentosum

    Directory of Open Access Journals (Sweden)

    Serhat Sibar

    2016-07-01

    Full Text Available BackgroundXeroderma pigmentosum (XP is an autosomal recessive disorder characterized by xerosis, ultraviolet light sensitivity, and cutaneous dyspigmentation. Due to defects in their DNA repair mechanism, genetic mutations and carcinogenesis inevitably occurs in almost all patients. In these patients, reconstruction of cutaneous malignancies in the head and neck area is associated with some challenges such as likelihood of recurrence and an aggressive clinical course. The aim of this study is to discuss the therapeutic options and challenges commonly seen during the course of treatment.MethodsBetween 2005 and 2015, 11 XP patients with head and neck cutaneous malignancies were included in this study. Demographic data and treatment options of the patients were evaluated.ResultsThe mean age of the patients was 32 years (range, 10–43 (4 males, 7 females. The most common tumor type and location were squamous cell carcinoma (6 patients and the orbital region (4 patients, respectively. Free tissue transfer was the most commonly performed surgical intervention (4 patients. The average number of surgical procedures was 5.5 (range, 1–25. Six patients were siblings with each other, 5 patients had local recurrences, and one patient was lost to follow-up.ConclusionsAlthough genetic components of the disease have been elucidated, there is no definitive treatment algorithm. Early surgical intervention and close follow-up are the gold standard modalities due to the tendency toward rapid tumor growth and possible recurrence. Treatment must be individualized for each patient. In addition, the psychological aspect of the disease is an important issue for both patients and families.

  20. Technical Aspects and Difficulties in the Management of Head and Neck Cutaneous Malignancies in Xeroderma Pigmentosum

    Science.gov (United States)

    Findikcioglu, Kemal; Erdal, Ayhan Isik; Barut, Ismail; Ozmen, Selahattin

    2016-01-01

    Background Xeroderma pigmentosum (XP) is an autosomal recessive disorder characterized by xerosis, ultraviolet light sensitivity, and cutaneous dyspigmentation. Due to defects in their DNA repair mechanism, genetic mutations and carcinogenesis inevitably occurs in almost all patients. In these patients, reconstruction of cutaneous malignancies in the head and neck area is associated with some challenges such as likelihood of recurrence and an aggressive clinical course. The aim of this study is to discuss the therapeutic options and challenges commonly seen during the course of treatment. Methods Between 2005 and 2015, 11 XP patients with head and neck cutaneous malignancies were included in this study. Demographic data and treatment options of the patients were evaluated. Results The mean age of the patients was 32 years (range, 10–43) (4 males, 7 females). The most common tumor type and location were squamous cell carcinoma (6 patients) and the orbital region (4 patients), respectively. Free tissue transfer was the most commonly performed surgical intervention (4 patients). The average number of surgical procedures was 5.5 (range, 1–25). Six patients were siblings with each other, 5 patients had local recurrences, and one patient was lost to follow-up. Conclusions Although genetic components of the disease have been elucidated, there is no definitive treatment algorithm. Early surgical intervention and close follow-up are the gold standard modalities due to the tendency toward rapid tumor growth and possible recurrence. Treatment must be individualized for each patient. In addition, the psychological aspect of the disease is an important issue for both patients and families. PMID:27462567

  1. Nuovi aspetti dello sviluppo ciclico dell'economia. (New aspects of the cyclical development of the economy

    Directory of Open Access Journals (Sweden)

    P. SYLOS LABINI

    2013-12-01

    Full Text Available Il lavoro individua alcuni insegnamenti che si possono trarre da analisi di Schumpeter dello sviluppo ciclico dell'economia e che possono aiutare a capire gli aspetti innovativi attualmente visualizzati da questo processo fondamentale In particolare , l'autore indica gli elementi che possono essere derivati dal analisi microeconomica di Schumpeter e da quella macroeconomica di Keynes ' di costruire un modello integrato di sviluppo ciclico dell'economia in condizioni attuali. Egli conclude che ci sia molto da guadagnare , combinando elementi di analisi keynesiana della domanda e parte dell'analisi Schumpeter del progresso tecnico e della crescita efficace .The work identifies certain lessons which can be learned from Schumpeter’s analysis of the cyclical development of the economy and which may help in understanding the novel aspects presently displayed by this fundamental process. In particular, the author indicates which elements can be derived form Schumpeter’s microeconomic analysis and from Keynes’ macroeconomic one to construct an integrated model of the cyclical development of the economy in present-day conditions. He concludes that there is much to be gained by combining elements of Keynesian analysis of effective demand and parts of the Schumpeter analysis of technical progress and growth.JEL: E32, F44, B22

  2. Anterolateral corridor approach to the infratemporal fossa and central skull base in maxillectomy: rationale and technical aspects.

    Science.gov (United States)

    McMahon, Jeremy D; Crowther, John; Taylor, William M; Wong, Ling Siew; Paterson, Tom; Devine, John; Wales, Craig; MacIver, Colin

    2015-11-01

    We describe the technical aspects and report our clinical experience of a surgical approach to the infratemporal fossa that aims to reduce local recurrence after operations for cancer of the posterior maxilla. We tested the technique by operating on 3 cadavers and then used the approach in 16 patients who had posterolateral maxillectomy for disease that arose on the maxillary alveolus or junction of the hard and soft palate (maxillary group), and in 19 who had resection of the masticatory compartment and central skull base for advanced sinonasal cancer (sinonasal group). Early proximal ligation of the maxillary artery was achieved in all but one of the 35 patients. Access to the infratemporal fossa enabled division of the pterygoid muscles and pterygoid processes under direct vision in all cases. No patient in the maxillary group had local recurrence at median follow up of 36 months. Four patients (21%) in the sinonasal group had local recurrence at median follow up of 27 months. Secondary haemorrhage from the cavernous segment of the internal carotid artery resulted in the only perioperative death. The anterolateral corridor approach enables controlled resection of tumours that extend into the masticatory compartment. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  3. An overview of the political, technical and economical aspects of gas-fired distributed energy system in China

    International Nuclear Information System (INIS)

    Chen, Qiaohui; Wang, Weilong; Lu, Jianfeng; Ding, Jing

    2013-01-01

    The interest in distributed energy system has been increasing in China in recent years due to the environmental and energy policy concerns. The distributed energy system generates power, heating and cooling to residential, commercial and industrial facilities. Due to cascade utilization of energy, it can make good use of energy to improve energy efficiency and to increase energy savings. Furthermore, it consumes less energy and reduces carbon emissions. This paper reviews existing and newly-built gas-fired distributed energy projects in China. The techno-economic assessment of the selected projects has also been discussed and reported. The results show that in Xiamen Jimei DE project, the primary energy ratio of the DES can be as high as 92.9%, and energy-saving rate is 35.5%. Moreover, exergy efficiency reaches 54.3%, and the system can reduce 0.52 million tons of CO 2 annually. -- Highlights: ► The political, technical and economical aspects of gas-fired DES are analyzed. ► The techno-economic assessment of two selected projects is conducted. ► Primary energy ratio can be as high as 92.9% and energy-saving rate is 35.5%. ► Exergy efficiency is 54.3% and the system can reduce a large amount of CO 2 emissions

  4. Technical and economical aspects of SO2 and NOx removal from flue gas by electron beam irradiation

    International Nuclear Information System (INIS)

    Turhan, S.; Karadeniz, S.; Tugluoglu, N.; Eken, M.; Oktar, O.; Ercan, I.

    2001-01-01

    The emission of sulfur dioxide (SO 2 , also SO 3 ) and nitrogen oxides (NO, NO 2 , called NO x ) from fossil fuel burning power and industrial plants is one of the major sources of environmental pollution. These pollutants are named as acid gases causing acid rain and also indirect greenhouse gases contributing greenhouse effect. Acid rain damages forest, agriculture fields and flora, and cause public health concerns in regions having a number of industrial plants. Today, many countries have started to impose industrial emission limits and this movement has generated renewed interest in finding viable and cost effective solutions to SO 2 and NO x pollution control. The conventional technologies, wet scrubbing de-SO 2 and de-NO x , now reached their full potential therefore these methods are not expected to provide further improvements in terms of efficiency or reduction in construction costs. However, new technologies are being investigated for industrial scale commercial viability. One of them is electron beam process, which is dry scrubbing process and simultaneously removes SO 2 and NO x , and useful by-product for agriculture fertilizer. In this study, the economical and technical aspects of electron beam flue gas treatment process are discussed. Because an electron accelerator facility with electron beam energy of 500 KeV and electron beam current of 20 mA will be installed at ANRTC in TURKEY

  5. Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Maine Yankee nuclear power plant

    International Nuclear Information System (INIS)

    Latorre, V.R.; Mayn, B.G.

    1979-08-01

    This report documents the technical evaluation of the electrical, instrumentation, and control design aspects for the low temperature overpressure protection system of the Maine Yankee nuclear power plant. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria

  6. Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Yankee Rowe nuclear power plant

    International Nuclear Information System (INIS)

    Latorre, V.R.; Mayn, B.G.

    1979-08-01

    This report documents the technical evaluation of the electrical, instrumentation, and control design aspects for the low temperature overpressure protection system of the Yankee Rowe nuclear power plant. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria

  7. Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Salem nuclear power plant, Unit 1

    International Nuclear Information System (INIS)

    Laudenbach, D.H.

    1979-03-01

    The technical evaluation is presented for the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Salem nuclear power plant, Unit 1. Design basis criteria used to evaluate the acceptability of the system include operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria

  8. Second international tsunami workshop on the technical aspects of tsunami warning systems, tsunami analysis, preparedness, observation and instrumentation

    International Nuclear Information System (INIS)

    1989-01-01

    The Second Workshop on the Technical Aspects of Tsunami Warning Systems, Tsunami Analysis, Preparedness, Observation, and Instrumentation, sponsored and convened by the Intergovernmental Oceanographic Commission (IOC), was held on 1-2 August 1989, in the modern and attractive research town of Academgorodok, which is located 20 km south from downtown Novosibirsk, the capital of Siberia, USSR. The Program was arranged in eight major areas of interest covering the following: Opening and Introduction; Survey of Existing Tsunami Warning Centers - present status, results of work, plans for future development; Survey of some existing seismic data processing systems and future projects; Methods for fast evaluation of Tsunami potential and perspectives of their implementation; Tsunami data bases; Tsunami instrumentation and observations; Tsunami preparedness; and finally, a general discussion and adoption of recommendations. The Workshop presentations not only addressed the conceptual improvements that have been made, but focused on the inner workings of the Tsunami Warning System, as well, including computer applications, on-line processing and numerical modelling. Furthermore, presentations reported on progress has been made in the last few years on data telemetry, instrumentation and communications. Emphasis was placed on new concepts and their application into operational techniques that can result in improvements in data collection, rapid processing of the data, in analysis and prediction. A Summary Report on the Second International Tsunami Workshop, containing abstracted and annotated proceedings has been published as a separate report. The present Report is a Supplement to the Summary Report and contains the full text of the papers presented at this Workshop. Refs, figs and tabs

  9. Safety and environmental aspects of partitioning and transmutation of actinides and fission products. Proceedings of a technical committee meeting held in Vienna, 29 November - 2 December 1993

    International Nuclear Information System (INIS)

    1995-01-01

    There is considerable interest in many countries in the partitioning and transmutation of long lived radionuclides as a potential complement to the closed fuel cycle. Recognizing this, the IAEA organized a Technical Committee Meeting on Safety and Environmental Aspects of Partitioning and Transmutation of Actinides and Fission Products, to review the current status of progress of national and international programmes and identify the most important directions of co-operation. The results of the Technical Committee meeting are presented in this document. Refs, figs and tabs

  10. Safety and environmental aspects of partitioning and transmutation of actinides and fission products. Proceedings of a technical committee meeting held in Vienna, 29 November - 2 December 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    There is considerable interest in many countries in the partitioning and transmutation of long lived radionuclides as a potential complement to the closed fuel cycle. Recognizing this, the IAEA organized a Technical Committee Meeting on Safety and Environmental Aspects of Partitioning and Transmutation of Actinides and Fission Products, to review the current status of progress of national and international programmes and identify the most important directions of co-operation. The results of the Technical Committee meeting are presented in this document. Refs, figs and tabs.

  11. Technical aspects of pediatric epilepsy surgery: Report of a multicenter, multinational web-based survey by the ILAE Task Force on Pediatric Epilepsy Surgery.

    Science.gov (United States)

    Cukiert, Arthur; Rydenhag, Bertil; Harkness, William; Cross, J Helen; Gaillard, William D

    2016-02-01

    Surgical techniques may vary extensively between centers. We report on a web-based survey aimed at evaluating the current technical approaches in different centers around the world performing epilepsy surgery in children. The intention of the survey was to establish technical standards. A request was made to 88 centers to complete a web-based survey comprising 51 questions. There were 14 questions related to general issues, 13 questions investigating the different technical aspects for children undergoing epilepsy surgery, and 24 questions investigating surgical strategies in pediatric epilepsy surgery. Fifty-two centers covering a wide geographic representation completed the questionnaire. The median number of resective procedures per center per year was 47. Some important technical practices appeared (>80% of the responses) such as the use of prophylactic antibiotics (98%), the use of high-speed drills for bone opening (88%), nonresorbable material for bone flap closure (85%), head fixation (90%), use of the surgical microscope (100%), and of free bone flaps. Other questions, such as the use of drains, electrocorticography (ECoG) and preoperative withdrawal of valproate, led to mixed, inconclusive results. Complications were noted in 3.8% of the patients submitted to cortical resection, 9.9% hemispheric surgery, 5% callosotomy, 1.8% depth electrode implantation, 5.9% subdural grids implantation, 11.9% hypothalamic hamartoma resection, 0.9% vagus nerve stimulation (VNS), and 0.5% deep brain stimulation. There were no major differences across regions or countries in any of the subitems above. The present data offer the first overview of the technical aspects of pediatric epilepsy surgery worldwide. Surprisingly, there seem to be more similarities than differences. That aside many of the evaluated issues should be examined by adequately designed multicenter randomized controlled trials (RCTs). Further knowledge on these technical issues might lead to increased

  12. ANALISIS PENYEBAB BANJIR KALI JUANA

    Directory of Open Access Journals (Sweden)

    Teguh Marhendi

    2017-04-01

    Full Text Available Kali Juana yang berada di Kabupaten Pati dan Kudus serta sebagian kecil di Kabupaten Grobogan dan Blora, merupakan kawasan banjir. Kejadian banjir di Kali Juana, sudah menjadi rutinitas setiap musim hujan.Dari Januari sampai bulan Mei 2016tercatat terjadi 11 kejadian banjir dibeberapa wilayah, seperti Kecamatan Kaliwungu, Undaan dan Mejobo (Kab. Kudus serta Pati, Margorejo dan Juwana (Kab. Pati. Kali Juana merupakan bifurkasi Kali Serang pada Pintu Wilalung, yang berfungsi sebagai pintu pengatur banjir (dibangun pada zaman Belanda tahun 1918, melalui Kali Babalan menuju ke Kali Juana. Tulisan inidimaksudkan untuk menganalisis penyebab kejadian banjir di Kali Juana. Analisis dilakukan dengan melakukan kajani dan analisis hujan serta mekanisme aliran. Hasil analisis menunjukkan bahwa kondisi Kali Juana dari pertemuan Kali Logung di pintu Wilalung sampai hilir telah mengalami pendangkalan akibat kemiringan dasar atau topografi yang landai, dan mengakibatkan mudah terjadi sedimentasi sehingga mengurangi kapasitas pengaliran. Hal ini menyebabkan luapan banjir sering menggenangi wilayah Kabupaten Kudus dan Pati.

  13. Report on the consultants` meeting on co-ordination of the nuclear reaction data centers (technical aspects)

    Energy Technology Data Exchange (ETDEWEB)

    Schwerer, O; Wienke, H [eds.

    1997-10-01

    The report summarizes the co-ordination meeting of the network of Nuclear Reaction Data Centres organized by the IAEA in 1997. The meeting was attended by technical staff from ten member centres of the network (representing USA, Russia, China, Japan, Hungary, OECD-NEA and IAEA) to discuss technical matters of the nuclear data compilation and exchange by means of the jointly operated computerized systems CINDA, EXFOR, ENDF and others. Observers from Belgium and Ukraine also attended the meeting. The document includes status reports of all centres and selected working papers. Refs, figs, tabs.

  14. Theoretical Aspects of the Patterns Recognition Statistical Theory Used for Developing the Diagnosis Algorithms for Complicated Technical Systems

    Science.gov (United States)

    Obozov, A. A.; Serpik, I. N.; Mihalchenko, G. S.; Fedyaeva, G. A.

    2017-01-01

    In the article, the problem of application of the pattern recognition (a relatively young area of engineering cybernetics) for analysis of complicated technical systems is examined. It is shown that the application of a statistical approach for hard distinguishable situations could be the most effective. The different recognition algorithms are based on Bayes approach, which estimates posteriori probabilities of a certain event and an assumed error. Application of the statistical approach to pattern recognition is possible for solving the problem of technical diagnosis complicated systems and particularly big powered marine diesel engines.

  15. Report on the consultants' meeting on co-ordination of the nuclear reaction data centers (technical aspects)

    International Nuclear Information System (INIS)

    Schwerer, O.; Wienke, H.

    1997-10-01

    The report summarizes the co-ordination meeting of the network of Nuclear Reaction Data Centres organized by the IAEA in 1997. The meeting was attended by technical staff from ten member centres of the network (representing USA, Russia, China, Japan, Hungary, OECD-NEA and IAEA) to discuss technical matters of the nuclear data compilation and exchange by means of the jointly operated computerized systems CINDA, EXFOR, ENDF and others. Observers from Belgium and Ukraine also attended the meeting. The document includes status reports of all centres and selected working papers

  16. Report on the consultants` meeting on technical aspects of the co-operation of nuclear reaction data centers

    Energy Technology Data Exchange (ETDEWEB)

    Lemmel, H D; Schwerer, O; Wienke, H [eds.

    1995-10-01

    The IAEA Nuclear Data Section convenes in annual intervals coordination meetings of the Network of the Nuclear Reaction Data Center. The present meeting dealt with technical matters of the nuclear data compilation and exchange by means of the jointly operated computerized systems CINDA, EXFOR, ENDF and others. Refs, figs and tabs.

  17. Report on the consultants' meeting on technical aspects of the co-operation of nuclear reaction data centers

    International Nuclear Information System (INIS)

    Lemmel, H.D.; Schwerer, O.; Wienke, H.

    1995-10-01

    The IAEA Nuclear Data Section convenes in annual intervals coordination meetings of the Network of the Nuclear Reaction Data Center. The present meeting dealt with technical matters of the nuclear data compilation and exchange by means of the jointly operated computerized systems CINDA, EXFOR, ENDF and others. Refs, figs and tabs

  18. Two aspects of the technical and ergonomical evaluation of the advanced control-room of the new French PWR units

    International Nuclear Information System (INIS)

    Montmayeul, R.; Lestien, A.; Dien, Y.; Bozec, J.

    1987-01-01

    In 1981 EDF decided to design a computerized control-room to improve operations. The first unit will be put on the grid in 1991. In order to get a rapid feed-back of operating experience from the design of the new control-room, a full scope simulator has been built for validation by operating teams in 1987-1988. An evaluation plan has been designed. The evaluation goal is to show operation feasibility under any condition and evaluate ergonomy of the control-room. Various aspects have been defined for evaluation: workstation ergonomy, man-machine dialogue and workstation management, work distribution within an operating team, visual and medical aspects, work place and physical environment of the control-room. For each aspect hypothesis have been set up and will be validated. Validation is based on record of operators'actions, observations of behaviour during simulations and interviews. Several series of simulations under normal, incidental and accidental situations are planned. One of the most specific aspects of the new control-room is the computerized man-machine dialogue which needs workstation management actions to get information and actuate controls. Hypothesis concerning this aspect of the validation have been set up from design documentation, before any observation of work was possible, and was based on knowledge of potential problems of this kind of interface in process-control. The validation method is comparative between various simulations, between operators, between a computerized control-room and a classical one. Another aspect concerns the tasks allocation between shifts members and work organization in the control-room. For this part of the evaluation, hypothesis and experimental protocoles were made on the basis of a detailed analysis of work conditions in the present control-rooms. These two aspects of the control-room evaluation are presented. (author)

  19. ANALISIS LITERASI EKONOMI

    Directory of Open Access Journals (Sweden)

    Peter Garlans Sina

    2012-10-01

    Full Text Available Abstract: Analysis of Economic Literacy. The aim of this research is as an effort to increase economic literacy for individuals and households who want to achieve prosperity. Therefore, the obligation of improving the economic literacy needs to be done in a well-planned manner and come from the strong intention to learn in order to improve the economic literacy. It could have an effect on the assets accumulation, a better debt management, as a protection, as well as to increase savings and managing spending intelligently.   Keyword: economic literacy, asset, debt, protection, saving, spending   Abstrak: Analisis Literasi Ekonomi. Tulisan ini bertujuan sebagai upaya meningkatkan literasi ekonomi bagi individu maupun rumah tangga yang menginginkan mencapai kesejahteraan. Oleh karena itu, kewajiban meningkatkan literasi ekonomi perlu dilakukan secara terencana dan diawali dari niat untuk belajar meningkatkan literasi ekonomi karena dapat berefek pada akumulasi aset, pengelolaan utang yang tepat, proteksi, meningkatkan tabungan dan cerdas mengelola pengeluaran.   Kata kunci: literasi ekonomi, aset, utang, proteksi, menabung, pengeluaran

  20. High speed magnetically levitated transport systems: Technical and economic aspects. Sistemi di trasporto ad alta velocita' a levitazione magnetica: Considerazioni tecniche ed economiche

    Energy Technology Data Exchange (ETDEWEB)

    Martinelli, G; Morini, A [Padua Univ. (Italy)

    1992-11-01

    In assessing the current state of technology relative to high speed (400 to 500 km/h) magnetically levitated (MAGLEV) transportation systems, this paper compares the technical aspects of the two main types of suspension systems now being developed specifically for these transportation systems, i.e., attractive electromagnetic using conventional magnets, and repulsive electrodynamic using superconducting magnets. Commercialization prospects for these systems are reviewed by analyzing areas where high speed levitated trains could compete against conventional rail and air transportation systems. The technology review includes progress reports on research and developments activities taking place in Germany and Japan, as well as, descriptions of some recent applications of this technology.

  1. Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Haddam Neck Nuclear Power Plant

    International Nuclear Information System (INIS)

    Laudenbach, D.H.

    1979-03-01

    The technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Haddam Neck Nuclear Power Plant is presented. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Support Program being conducted for the U.S. Nuclear Regulatory Commission by Lawrence Livermore Laboratory

  2. Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Point Beach Nuclear Power Plant, Units 1 and 2

    International Nuclear Information System (INIS)

    Laudenbach, D.H.

    1979-03-01

    The technical evaluation is presented for the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Point Beach nuclear power plant, Units 1 and 2. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Support Program being conducted for the U.S. Nuclear Regulatory Commission by Lawrence Livermore Laboratory

  3. Technical evaluation of the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Point Beach Nuclear Power Plant, Units 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    Laudenbach, D.H.

    1979-03-01

    The technical evaluation is presented for the electrical, instrumentation, and control design aspects of the low temperature overpressure protection system for the Point Beach nuclear power plant, Units 1 and 2. Design basis criteria used to evaluate the acceptability of the system included operator action, system testability, single failure criterion, and seismic Category I and IEEE Std-279-1971 criteria. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Support Program being conducted for the U.S. Nuclear Regulatory Commission by Lawrence Livermore Laboratory.

  4. Goals, tasks and aspects of activity of Ukrainian State Scientific and Technical Center on Nuclear and Radiation Safety

    International Nuclear Information System (INIS)

    Kovbasenko, Yu.

    2001-01-01

    The goal of SSTC NRS activities is scientific, technical, analytical and expert support to the Nuclear Regulatory Department as a State Nuclear and Radiation Safety Regulatory Authority.The main tasks are: 1. Development and improvement of normative and legal framework in the field of nuclear power use in Ukraine; 2. Expert support in making regulatory decisions; 3. Research and development work on improvement engineering and operational safety of nuclear power facilities in Ukraine. The organizational structure of SSTC NRS is also given

  5. Technical cooperation with Central and Eastern European countries with special focus on engineering aspects of lifetime optimisation

    International Nuclear Information System (INIS)

    Trampus, P.

    2002-01-01

    A regional Technical Cooperation project for Central and Eastern European countries was established and funded by the IAEA as a response to the region's need. Majority of these countries are now in the process of establishing/strengthening their infrastructure for assessment of structural integrity of primary circuit components for an appropriate level of safety and reliability. Moreover, extension of the operational life of the WWER nuclear power plants (NPPs) became part of the generation strategy in most of these countries. The overall objective of the project is to improve long term integrity of primary circuit components as a fundamental technical prerequisite to ensure plant operation until and beyond the design lifetime. In a series of workshops and technical meetings issues relevant to primary circuit component structural integrity with special regard to operational life optimization have been being addressed. The works under the project are coordinated with the European Commission's integrity related assistance projects, and some of the activities are jointly organized with the WANO Moscow Center. Main conclusions of the central topics are summarized in this paper

  6. Review and comment on the advanced spent fuel management process (1): Technical aspects and non-proliferation concerns

    International Nuclear Information System (INIS)

    Song, Yo Taik

    2001-01-01

    Efforts are made to analyze the project, the Advanced Spent Fuel Management Technology (ASFMT), which is currently carried out at Korea Atomic Energy Research Institute, on the technical feasibility and validity as well as on the nuclear non-proliferation concerns. The project is a part of a program under the 'Long and Midterm Nuclear Development Program'. On the technical analysis, reviewed the papers presented at the national and international meetings on the subject by KAERI staffs, and also participated to various technical discussions on the 'Mock-up Test', currently in progress. On the non-proliferation concerns, the ASFMT project was reviewed and analyzed in reference to various programs currently in progress or in a formulation stages in US, such as the DOE TOPS and ATW. Further reviewed the past JASNEC process and programs for possible application of the ASFMT project for JASNEC project. Provided a few thoughts for effectively carrying out the ASFMT project, and a plan for the next phase is presented

  7. Review and comment on the advanced spent fuel management process (1): Technical aspects and non-proliferation concerns

    Energy Technology Data Exchange (ETDEWEB)

    Song, Yo Taik

    2001-01-01

    Efforts are made to analyze the project, the Advanced Spent Fuel Management Technology (ASFMT), which is currently carried out at Korea Atomic Energy Research Institute, on the technical feasibility and validity as well as on the nuclear non-proliferation concerns. The project is a part of a program under the 'Long and Midterm Nuclear Development Program'. On the technical analysis, reviewed the papers presented at the national and international meetings on the subject by KAERI staffs, and also participated to various technical discussions on the 'Mock-up Test', currently in progress. On the non-proliferation concerns, the ASFMT project was reviewed and analyzed in reference to various programs currently in progress or in a formulation stages in US, such as the DOE TOPS and ATW. Further reviewed the past JASNEC process and programs for possible application of the ASFMT project for JASNEC project. Provided a few thoughts for effectively carrying out the ASFMT project, and a plan for the next phase is presented.

  8. Technical, socio-economic, radioecological and medical aspects of works in the World during 1986-1997 which are connected with the Chernobyl accident

    International Nuclear Information System (INIS)

    Trofimenko, A.P.; Pisanko, Zh.I.; Kuprava, O.M.

    1999-01-01

    Technical, social, radioecological and medical aspects of works in the World during the years 1986-1997 in which causes and different aspects of Chernobyl accident were studied, are considered. Main directions of these works were found and the role each of them was quantitatively evaluated. A new method of INIS database analysis was used for this purpose. It permits to find subject fields of research and to give their general characteristics. An analysis of the topical content of some publications permitted to describe qualitatively their results. The obtained information can be used by the specialists who are dealing with the problems of Chernobyl accident mitigation, in finding the most important directions of work in this field, and in planning and realization of new research. 10 refs., 9 tab

  9. Technical-economical, agronomical, pedological, hygienic and normative aspects of municipal wastewater sludges; Aspetti tecnico-economici, agronomici, pedologici, igienico-sanitari e normativi dei fanghi di depurazione civile

    Energy Technology Data Exchange (ETDEWEB)

    Ottavi, C [ENEA, Rome (Italy). Dip. Ambiente; Ottaviani, M [Istituto Superiore di Sanita, Rome (Italy). Lab. di Igiene Ambientale; Figliolia, A [Istituto Sperimentale per la Nutrizione delle Piante, Rome (Italy)

    1995-12-01

    This review is intended to give an overview on the technical, economical, agronomical, pedological and hygienic aspects of sludges from treatment plants of civil wastewater, Both Italian and European regulations on the sludge disposal are considered.

  10. IAEA advisory group meeting on technical aspects of atomic and molecular data processing and exchange (15. meeting of the A+M data centres and ALADDIN network). Summary report

    International Nuclear Information System (INIS)

    Stephens, J.A.

    1999-12-01

    The proceedings of the IAEA Advisory Group Meeting on 'Technical Aspects of Atomic and Molecular Data Processing and Exchange' (15th Meeting of A+M Data Centres and ALADDIN Network), held on September 13-14, 1999 in Vienna, Austria are briefly described. The meeting conclusions and recommendations on the priorities in A+M data compilation and evaluation, and on the technical aspects of data processing, exchange, and distribution are also presented. (author)

  11. IAEA advisory group meeting on 'Technical Aspects of Atomic and Molecular Data Processing and Exchange' (14th meeting of the A + M data centres and ALADDIN network). Summary report

    International Nuclear Information System (INIS)

    Stephens, A.

    1998-01-01

    The proceedings of the IAEA Advisory Group Meeting on ''Technical Aspects of Atomic and Molecular Data Processing and Exchange (14th Meeting of A + M Data Centres and ALADDIN Network)'', held on July 21-22, 1997 in Vienna, Austria are briefly described. The meeting conclusions and recommendations on the priorities in A + M data compilation and evaluation, and on the technical aspects of data processing and exchange are also presented. The document includes 15 reports from various Data Centres

  12. IAEA advisory group meeting on technical aspects of atomic and molecular data processing and exchange (16. meeting of the A+M Data Centres and ALADDIN network). Summary report

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, J A [ed.

    2001-12-01

    The proceedings of the IAEA Advisory group meeting on technical aspects of atomic and molecular data processing and exchange (16. meeting of A+M Data centers and ALADDIN Network), held on September 10-11, 2001 in Vienna, Austria are briefly described. The meeting conclusions and recommendations on the priorities in A+M data compilation and evaluation, and on the technical aspects of data processing, exchange and distribution are also presented. (author)

  13. PENERAPAN ANALISIS SWOC DALAM RENCANA STRATEGIS PENDIDIKAN

    Directory of Open Access Journals (Sweden)

    Hardianto -

    2018-01-01

    Full Text Available Analisis SWOC merupakan salah satu langkah yang bisa diambil dalam membuat sebuah rencana strategis pendidikan. Analisis ini dilakukan untuk melihat secara mendalam situasi internal dan eksternal organisasi. Situasi internal yang dilihat adalah kekuatan (Strenghts dan kelemahan (Weaknesses organisasi pendidikan. Situasi eksternal berupa peluang (Opportinities dan tantangan (Challenges. Untuk membuat sebuah rencana strategis yang baik dapat dilakukan dengan menganalisis setiap kekuatan, kelemahan, peluang dan tantangan. Teknik kartu salju (snow card bisa digunakan dalam melakukan analisis SWOC. Hasil analisis tersebut nantinya akan melahirkan kombinasi strategi kekuatan-peluang, kekuatan-tantangan, kelemahan-peluang dan kelemahan-tantangan.

  14. Installation, performance, safety aspects and technical data of the triple axis Spectrometer at TRIGA Reactor of AERE

    International Nuclear Information System (INIS)

    Yunus, S. M.; Kamal, I.; Datta, T. K.; Zakaria, A. K. M.; Ahmed, F. U.

    2004-02-01

    The technical data of the Triple Axis Neutro Spectrometer installed at the 3 MW TRIGA Mark II research reactor has been described. These are the reference data required for the operation, maintenance and use of the spectrometer. The detail information of the installation of the spectrometer has been given. Radiation safety features of the spectrometer and around the radial piercing beam port (where the spectrometer is installed) are described elaborately. The quality test experiments and the performance of the spectrometer as found from these tests are also described

  15. Nuclear heat applications: design aspects and operating experience. Proceedings of four technical meetings held between December 1995 and April 1998

    International Nuclear Information System (INIS)

    1998-11-01

    Proven to be safe, reliable, economic and having minimum impact on the environment, nuclear energy is playing an important role in electricity generation producing 175 of the world's electricity. But since most of the world's energy consumption is in the form of heat the market for nuclear heat has already been recognised. Considering the growing experience in application of power reactors for district heating, industrial processes and water desalination IAEA is periodically reviewing progress and new developments of nuclear heat applications. This proceedings includes the papers presented at the following four meetings: Advisory group meeting and consultancy on experience with nuclear heat applications: district heating, process heat and desalination, 13-15 December 1995 and 7-9 february 1996; Advisory group meeting on technology, design and safety aspects of non-electrical application of nuclear energy, 20-24 October 1997; Advisory group meeting on operational modes of nuclear desalination plants, 3-5 November 1997; Advisory group meeting on materials and equipment for the coupling interfaces of nuclear reactors with desalination and district heating plants, 21-23 April 1998. It is structured according to the subject areas: (1) design an safety aspects of nuclear heat application, (2) operational and material aspects of nuclear heat application and (3) operational experience with nuclear heat application. Each paper is described by a separate abstract

  16. Automated Synthesis of 68Ga-DOTA-TOC: Methodological Aspects and Suitable Technical Solutions for a Cationic Purification System.

    Science.gov (United States)

    Uccelli, Licia; Boschi, Alessandra; Cittanti, Corrado; Martini, Petra; Lodi, Luca; Zappaterra, Elisa; Romani, Simona; Zaccaria, Samanta; Cecconi, Davide; Rambaldi, Ilaria; Santi, Ivan; Panareo, Stefano; Giganti, Melchiore; Bartolomei, Mirco

    2018-05-08

    The PET Gallium-68 isotope has the advantage of being produced from a generator, so it is also available in nuclear medicine departments without a cyclotron. The preparation of Ga-68 DOTA-labelled compounds is actually performed by remotely controlled automated systems developed in order to assure production efficiency, reproducibility of the results, guarantee fast reaction time, to facilitate the synthesis and minimize the radiation exposure. Many automatic synthesis systems are available on the radiopharmaceutical market, and each of these requires the realization of some technical adaptations for routine use. We reported the Ga-68 DOTATOC production by automated cassette-based theranostic synthesizer system used in combination with a disposable GMP grade cassette system for cationic purification. The synthesizer is integrated with the 68Ge/68Ga generator systems and it allows to perform elution, eluate purification and radiolabeling in about 38 minutes. We have performed between January 2016 and January 2017 over 100 [68Ga]Ga-DOTA-TOC preparation and of these only three have failed. The average synthesis yield of radiopharmaceutical production was 54.4 ± 2.3 % and the average radiochemical purity was 96.94 ± 0.74 %. The methodology and the technical solutions adopted have allowed to obtain a high quality radiopharmaceutical product as required by the European Pharmacopoeia. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  17. Final report on a study of coherence in acceptability criteria for the technical aspects of risks associated with potentially hazardous installations

    International Nuclear Information System (INIS)

    Chicken, J.C.

    1988-01-01

    This report describes the results of the study that was made, under Contract No ECI-1390-B7221-85D, for the European Atomic Energy Community. The aim of the study was to examine and assess the feasibility of developing coherent and uniform criteria for judging the acceptability of the technical aspects of the risks associated with potentially hazardous installations. The report is arranged in five main parts. First the nature of hazardous installations is considered and this provides the basis for examination of the currently-used technical risk acceptability criteria. Next, the possible forms of criteria are explored and then universally consistent partial and overall technical risk acceptability criteria are proposed. Following this the implications of using the criteria proposed at the design, regulatory and operating levels are examined. Then, by testing the criteria against some real decisions, the practical problems of using the proposed criteria are explored. This leads to consideration of possible alternatives to the proposed criteria. Finally the conclusions that appear to be justified are summarized and the need for further work is identified

  18. Restoring tactile and erogenous penile sensation in low-spinal-lesion patients: procedural and technical aspects following 43 TOMAX nerve transfer procedures.

    Science.gov (United States)

    Overgoor, Max L E; de Jong, Tom P V M; Kon, Moshe

    2014-08-01

    The "TOMAX" (TO MAX-imize sensation, sexuality, and quality of life) procedure restores genital sensation in men with low spinal lesions, improving sexual health, as shown previously. It connects the dorsal nerve of the penis to the intact ipsilateral ilioinguinal nerve, unilaterally or bilaterally. This study reports on the technical aspects based on 43 TOMAX nerve transfers. In 40 patients with no penile but intact groin sensation, 43 nerve transfers were performed. Data on patient selection, surgical history, anatomy of the ilioinguinal nerve and dorsal nerve of the penis, unilateral or bilateral surgery, surgical technique, complications, and patient information were collected prospectively. Regardless of origin, all patients with no penile but good groin sensation are eligible for the procedure, provided the ilioinguinal nerve is not damaged because of former inguinal surgery or absent because of anatomical variations. Selection of a unilateral or bilateral procedure depends on the presence or absence of reflex erections and bulbocavernosus reflex. Preliminary experience with the first three bilateral cases shows that it is technically feasible, with encouraging results. The surgical technique has evolved (described in detail, including video) to enhance outcome and reduce complications. Patients are better informed, resulting in realistic expectations. This article synthesizes the procedural and technical experience of 43 TOMAX nerve transfers. Anyone skilled in peripheral nerve surgery and microsurgery can adopt this concept and further develop it. The TOMAX procedure can then be used to restore erogenous penile sensation and improve the quality of sexual health in patients with absent penile but good groin sensation.

  19. Scientific and technical aspects of international cooperation in Chernobyl; Naukovyi ta tekhnyichnyi aspekti myizhnarodnogo spyivrobyitnitstva v Chornobilyi

    Energy Technology Data Exchange (ETDEWEB)

    Gligalo, V M; Nosovs' kij, A V [eds.

    2001-07-01

    The collection contains the presentations and scientific articles prepared for and discussed during the Conference titled '2000: International Cooperation For Chernobyl'. The materials outline the outcomes achieved while implementing Chernobyl site scientific-technical researches and projects, as well as activities aimed at enhancing the ChNPP safety, decommissioning and radwaste management. It also highlights the issues related to transforming the Unit Shelter into an ecologically safe system, represents the results of ecological researches in the Exclusion Zone, medical effects of the 1986 accident at Chernobyl NPP, together with social and economic problems the city of Slavutich faces now due to the early ChNPP Units decommissioning, and Slavutich business development opportunities under the circumstances of Special Economic Zone 'Slavutich'.

  20. Analisis Cadangan Devisa Indonesia

    Directory of Open Access Journals (Sweden)

    Lusia Bunga Uli

    2016-09-01

    Full Text Available Abstract This study aims to determine the relationship between variables export, import, and exchange rate against Foreign Exchange Reserves in Indonesia. The data used in the empirical study of a sequence of data monthly time of year 2011.01 through 2014.12 from Bank Indonesia and the Central Statistics Agency (BPS. The analysis tool used is Auto Regression Vector Model (VAR. The results of this study indicate that the one-way relationship between the variables of foreign reserves and export. Then one-way relationship between exchange rate and exports. Lastly, there is a two-way relationship between imports and foreign exchange reserves, two-way relationship between exchange rate and foreign exchange reserves, two-way relationship between imports and exports, two-way relationship between the exchange rate and imports. The results also showed foreign exchange reserves are significantly influenced by the movement itself at a probability of 1 %. Export variable negative and not significantly affect the foreign exchange reserves. While imports of positive and not significant to the foreign exchange reserves. Foreign Exchange Reserves Indonesia is positively influenced by the exchange rate and not significant. Keywords: Foreign exchange reserves, exports, imports, exchange rate   Abstrak. Penelitian ini bertujuan untuk mengetahui seberapa keterkaitan antar variabel ekspor, impor, dan nilai tukar rupiah terhadap Cadangan Devisa Indonesia. Data yang digunakan dalam kajian empiris ini merupakan data runtutaan waktu bulanan dari tahun 2011.01 sampai 2014. 12 yang berasal dari Bank Indonesia dan Badan Pusat Statistik (BPS. Alat analisis yang digunakan yaitu Vector Autoregression Model (VAR. Hasil dari penelitian ini menunjukkan bahwa hubungan searah antara variabel cadangan devisa ke ekspor. Lalu hubungan searah antara kurs terhadap ekspor Terakhir, terdapat hubungan dua arah antara impor dan cadangan devisa, hubungan dua arah antara kurs dan cadangan

  1. Analisis Semiotik Sajak Bulang Cahaya

    Directory of Open Access Journals (Sweden)

    Junaidi Junaidi

    2014-11-01

    Full Text Available Penelitian ini bertujuan menggali makna tanda yang terdapat dalam sajak Bulang Cahaya karya Rida K Liamsi. Untuk menggali makna itu, pendekatan analisis semiotik Roland Barthes digunakan. Hasil penelitian menunjukkan bahwa sajak ini berisi tanda-tanda bersumber dari kosa kata Melayu lama. Sajak ini juga berisi simbol-simbol yang berkaitan dengan kehidupan orang Melayu. Penggunaan kata-kata Melayu lama dan simbol Melayu memperkuat setting Melayu dalam sajak ini. Analisis makna menunjukkan bahwa seseorang merasakan kedukaan sangat mendalam ketika cintanya harus berakhir, tetapi ia terus merasakan kerinduan dengan kekasihnya yang telah pergi. Mitos cinta yang terdapat dalam pusinya adalah orang tahu bahwa putus cinta itu menyakitkan tetapi orang tetap saja jatuh cinta.

  2. No 2965, No 254. Report on new energy technologies and carbon dioxide sequestration: scientifical and technical aspects

    International Nuclear Information System (INIS)

    Bataille, Ch.; Birraux, C.

    2006-03-01

    The abatement of CO 2 emissions is a huge technical and economical challenge. Fossil fuels, which represent 88% of the world primary energy consumption, are the main source of the 25 billions of CO 2 released each year in the atmosphere. The mastery of CO 2 emissions cannot come from a single technology but must result from the simultaneous implementation of several means, like the development of carbon-free energies and the mastery of fossil fuel emissions. The opportunities of progress are numerous and compatible with the economic development. This document presents, first, the different greenhouse gases, the CO 2 emissions per country and the main sources of CO 2 emissions (power and heat generation, transports). Then it presents different ways of abatement of CO 2 emissions: clean coal technologies, gas combined cycles, CO 2 sequestration, reduction of fuel consumption in transports, development of carbon-free energies: wind power, solar photovoltaic for decentralized power generation, nuclear energy for a competitive power generation and for CO 2 abatement, biofuels of 2. generation and fuel cells. The conclusion stresses on the investments needed for the renewal and increase of energy capacities, and on the necessary visibility and moderation of emission abatement mechanisms (carbon trading and CO 2 prices). (J.S.)

  3. Analisis Industri Ritel Di Indonesia

    OpenAIRE

    Soliha, Euis

    2008-01-01

    This article presents an overview the analisys of retail industry in Indonesia.Retail industry in Indonesia grow rapidly. Industrial presence of modern retailbasically exploits public shopping pattern especially middle-weight and to which donot want to mill around in traditional market. Analysis Five Forces is used toanalysis retail industry. Analysis five force is bargaining power of buyers,bargaining power of suppliers, threat of new entrants, threat of new substituteproducts, and rivalry a...

  4. ANALISIS POSITIONING RESTORAN CEPAT SAJI

    Directory of Open Access Journals (Sweden)

    Osa Omar Sharif

    2017-04-01

    Full Text Available Penelitian ini bertujuan untuk meneliti positioning restoran cepat saji McDonald's, Kentucky Fried Chicken, California Fried Chicken, A&W, dan Texas Chicken. Penelitian dilakukan di Kota Bandung dengan mengambil sebanyak 400 responden. Analisis yang digunakan dalam penelitian ini adalah analisis multidimensional scaling, analisis memberikan gambaran positioning dari restoran cepat saji yang ditampilkan dalam perceptual map. Restoran cepat saji yang memiliki layanan paling baik adalah McD dan yang memiliki layanan paling buruk adalah CFC. Restoran cepat saji yang memiliki rasa makanan paling enak adalah McD dan yang memiliki rasa makanan tidak enak adalah CFC. KFC dinilai paling ideal karena selalu berhasil menduduki peringkat satu dan dua jika dilihat dari sudut pandang restoran cepat saji yang lain. Pesaing terdekat McD adalah KFC. McD mendapatkan ranking pertama dari segi atribut layanan, kebersihan, variasi makanan, dan rasa makanan. Dengan posisi seperti ini McD seharusnya tetap menjaga kualitas layanan, kebersihan, variasi makanan, dan rasa makanan agar konsumen tetap memilih untuk datang ke McD. KFC sebaiknya tetap menjaga suasana yang membuat konsumen nyaman akan suasana di dalam atau diluar restoran

  5. Technical aspects of coupling a 6300 m3/day MSF-RO desalination plant to a PHWR nuclear power plant

    International Nuclear Information System (INIS)

    Verma, R.K.

    1998-01-01

    Presently, eight pressurised Heavy Water Reactors (PHWRs) each of 235 MWe capacity are operational in India. Four more units of similar capacity are expected to be commissioned soon. Work on two units each of 500 MWe capacity is also initiated. Extensive engineering development work has also been carried out in India, both on the MSF process and the membrane process. Based on the experience obtained from the presently operating 425 m 3 /d MSF plant and from the R and D work on the RO process, a 6300 m 3 /d MSF-RO plant (4500 m 3 /d MSF and 1800 m 3 /d RO) has been designed and the work for setting up this plant is undertaken. The steam for the heating duty in the brine heater as well as the steam for the evacuation purpose for the MSF plant is proposed to be obtained from the nuclear plant steam cycle. Sea water feed for the MSF plant as well as for the RO plant will be derived from the sea water discharge system of the nuclear power plant. Provision is made for supply of electrical power also from the power plant. The details of the heating steam supply circuit starting from the steam tapping point on the nuclear plant side to the MSF plant brine heater inlet and the arrangement for the return of condensate to the nuclear plant has been described with component requirement and various technical considerations. All the liquid streams and the steam supplied from the nuclear plant to the desalination plant as well as the product water will be monitored to ensure that there is no radioactive contamination. (author)

  6. Chapter 10. Multinational and international controls. Paper 17. A preliminary evaluation of the technical aspects of INFCE

    International Nuclear Information System (INIS)

    Farinelli, U.

    1979-01-01

    The International Nuclear Fuel Cycle Evaluation (INFCE) has not generated any very new idea in terms of reactors or fuel cycles. Its very subdivision into working groups, which for the most part represent the traditional subdivisions of the fuel cycle, and the absence of a full-time international working team for the evaluation, have been obstacles in this direction. Moreover, evaluation based on studies and extrapolations has very little ultimate value; a realistic assessment requires such a detailed analysis that it can only be performed on small variations of present systems. Proliferation characteristics of various fuel cycles have proven more difficult to evaluate than was previously thought. First, proliferation is mainly a short-term issue, and not many solutions are applicable within this time horizon (20 or 25 years); second, traditional criteria to classify proliferation resistance have become less rigid at closer scrutiny; and finally, it is difficult to assess the effectiveness of technical antiproliferation measures without considering the political actions attached to them. The result is that the two basic strategies of the USA (based on the once-through fuel cycle in light water reactors and postponing decisions on more advanced solutions) and of Western Europe and Japan (based on fuel reprocessing and early deployment of fast breeders) have remained the only realistic options under discussion. However, changes are taking place in each strategy to make the one less wasteful of fuel and the other more protected for proliferation, and it is reasonable to suppose that they will be able to co-exist in the future. (author)

  7. Technical aspects of typing for HLA-DP alleles using allele-specific DNA in vitro amplification and sequence-specific oligonucleotide probes. Detection of single base mismatches

    DEFF Research Database (Denmark)

    Fugger, L; Morling, N; Ryder, L P

    1990-01-01

    The polymerase chain reaction (PCR) is an effective method for in vitro DNA amplification which combined with probing with synthetic oligonucleotides can be used for, e.g., HLA-typing. We have studied the technical aspects of HLA-DP typing with the technique. DNA from mononuclear nucleated cells...... was extracted with either a simple salting out method or phenol/chloroform. Both DNAs could be readily used for PCR. The MgC2 concentration of the PCR buffer and the annealing temperature of the thermal cycle of the PCR were the two most important variables. The MgCl2 concentration and the temperature must...... be carefully titrated for each primer pair in the PCR. The influence of mismatches between the primer and the DNA template were studied and we found that, by using primers differing only from each other at the 3' end, cross-amplification of closely homologous alleles could be avoided. Thus, single base...

  8. The Brazilian psychiatric reform: historical and technical-supportive aspects of experiences carried out in the cities of São Paulo, Santos and Campinas

    Directory of Open Access Journals (Sweden)

    Cristina Amélia Luzio

    2007-01-01

    Full Text Available The Brazilian psychiatric reform: historical and technical-supportive aspects of experiences carried out in the cities of São Paulo (capital, Santos and Campinas, in order to understand their material, social and political impacts, the progress in the process of breaking away from the psychiatric ward model, and the establishment of creative and productive groups, required to build up the psychosocial treatment in regard to mental health, as well as to evaluate the contribution that the SUS (Brazilian Public Health System had on the psychiatric reform in the mentioned cities. The research, which is the basis of this paper, is part of a thesis regarding mental health care, whereby the innovative projects implemented in those cities served as framework and basis for comparison to analyze mental health policy in small and medium-sized cities and towns in the state of São Paulo.

  9. Cattle traceability in the Mid-South region of Mato Grosso State: economic, technical and conception aspects

    Directory of Open Access Journals (Sweden)

    Rodrigo de Andrade Ferrazza

    2013-02-01

    Full Text Available It was aimed to investigate economic aspects of the establishment of traceability in the Mid-South region of MT, Brazil, methods of animal identification, complains, drawbacks and degree of importance given by ranchers. During May to July 2009 were conducted interviews with 13 owners of Rural Establishments Approved in SISBOV (ERAS and the survey of economic values practiced by three certifying companies and one slaughterhouse from the region. All the farms interviewed utilized earring and bottom. The main difficulties for the establishment of tracking were the frequent changes (46.30%, the understanding of the laws (30.57%, and the choice of the certifier (23.13%. The greatest drawbacks of Cattle and Buffalo Identification and Certification System (SISBOV were the excessive delay of official audits (53.85%, the instability of differential value (23.10%, loss of identification elements (15.39% and the delay when requested earring reprinting (7.69%. The importance ascribed was ensuring the credibility and adding value to the Brazilian product (84.61%. The individual value for the tracking process was R$ 4,34. The difference of tracked animal slaughtered for the European Union was R$ 10,73@-1. The establishment of the tracking system presented economic viability and the variation of the values paid by the tracked meat despite animals aiming exportation.

  10. Technical analysis and economic effect of an industrial initiative in the photovoltaic sector; Effetto dell' analisi tecnica ed economica di una iniziativa industriale nel settore dell'energia fotovoltaica

    Energy Technology Data Exchange (ETDEWEB)

    Ciorba, U.; Pauli, F. [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Menna, P. [ENEA, Funzione Centrale Studi, Centro Ricerche Portici, Naples (Italy)

    2001-07-01

    In this paper it is assessed the potential economic impact of an industrial initiative in the photovoltaic manufacturing sector, in terms of induced production and job creation, to be implemented in Morocco. This country exhibits indeed a high potential for photovoltaic installations as proved by the relevant number of national and international deployment programs currently underway. Solar electricity generation schemes look very promising for the relevant role they could play in the future, Co2-emission free, world energy scenarios making potentially more appealing the planning of longer-term public investments. In this study, it was described the manufacturing process providing the solar modules as final output and associate to each step of the process the corresponding costs. Then, using input-output method, it was evaluated the economic impact of the production of 5 MWp modules a year under different hypotheses. A production of 5MWp photovoltaic modules, which require an overall investment of Euro 16.3 millions increases gross domestic product of Euro 57.6 millions if cells are locally produced and only of Euro 22.3 millions when the cells are imported, creating 2570 and 489 jobs, respectively. These results outline the importance of availability of inputs in local economical context. [Italian] In questo lavoro valutiamo il potenziale impatto economico, in termini di produzione indotta e incremento di occupazione, di un' iniziativa industriale per la fabbricazione di moduli fotovoltaici in Marocco. Questo paese presenta, in effetti, un potenziale per installazioni fotovoltaiche molto interessante, come d'altra parte provano i numerosi programmi nazionali e internazionali attualmente in corso. Nel nostro studio, descriviamo, innanzitutto, il processo relativo alla produzione dei moduli, caratterizzandone ciascuna fase con i relativi costi, adattati al contesto prescelto per questo studio. Quindi, adottando la metodologia di analisi delle

  11. Comparative analysis between a PEM fuel cell and an internal combustion engine driving an electricity generator: Technical, economical and ecological aspects

    International Nuclear Information System (INIS)

    Braga, Lúcia Bollini; Silveira, Jose Luz; Evaristo da Silva, Marcio; Machin, Einara Blanco; Pedroso, Daniel Travieso; Tuna, Celso Eduardo

    2014-01-01

    In the recent years the fuel cells have received much attention. Among various technologies, the Proton Exchange Membrane Fuel Cell (PEMFC) is currently the most appropriate and is used in several vehicles prototype. A comparative technical, economical and ecological analysis between an Internal Combustion Engine fueled with Diesel driving an electricity Generator (ICE-G) and a PEMFC fed by hydrogen produced by ethanol steam reforming was performed. The technical analysis showed the advantages of the PEMFC in comparison to the ICE-G based in energetic and exergetic aspects. The economic analysis shows that fuel cells are not economic competitive when compared to internal combustion engine driving an electricity generator with the same generation capacity; it will only be economically feasible in a long term; due to the large investments required. The environmental analysis was based on concepts of CO 2 equivalent, pollution indicator and ecological efficiency. Different to the ICE-G system, the Fuel Cell does not emit pollutants directly and the emission related to this technology is linked mainly with hydrogen production. The ecological efficiency of PEMFC was 96% considering the carbon dioxide cycle, for ICE-G system this parameter reach 51%. -- Highlights: • The exergetic efficiency of ICE-G was 22% and for the fuel cell was 40%. • The PEM fuel cell at long-term become economically competitive compared to ICE-G. • The ecological efficiency of PEM fuel cell was 96% and Diesel ICE-G was 51%

  12. Minimal Incision Scar-Less Open Umbilical Hernia Repair in Adults - Technical Aspects and Short Term Results

    Directory of Open Access Journals (Sweden)

    Sanoop Koshy Zachariah

    2014-09-01

    Full Text Available Background: There is no gold standard technique for umbilical hernia repair .Conventional open umbilical hernia repair often produces an undesirable scar. Laparoscopic umbilical hernia repair requires multiple incisions beyond the umbilicus, specialized equipments, and expensive tissue separating mesh. We describe our technique of open umbilical hernia repair utilizing a small incision. The technique was derived from our experience with single incision laparoscopy. We report the technical details and short term results. Methods: This is a retrospective analysis of the first 20 patients who underwent minimal incision scar-less open umbilical hernia repair, from June 2011 to February 2014. A single intra-umbilical curved incision was used to gain access to the hernia sac. Primary suture repair was performed for defects upto 2cm.Larger defects were repaired using an onlay mesh. In patients with a BMI of 30 kg/m2 or greater, onlay mesh hernioplasty was performed irrespective of the defect size.Results: A total of 20 patients, 12 males and 8 females underwent the procedure. Mean age was 50 (range 29 - 82 years. Mean BMI was 26.27 (range 20. -33.1 kg/m2. Average size of the incision was 1.96 range (1.5 to 2.5 cm. Mesh hernioplasty was done in 9 patients. 11 patients underwent primary suture repair alone. There were no postoperative complications associated with his technique. Average post operative length of hospital stay was 3.9 (range 2-10 days. Mean follow-up was 29.94 months, (2 weeks to 2.78 years. On follow up there was no externally visible scar in any of the patients. There were no recurrences on final follow up. Conclusion: This technique provides a similar cosmetic effect as obtained from single port laparoscopy. It is easy to perform safe, offers good cosmesis, does not require incisions beyond the umbilicus and cost effective, with encouraging results on short term follow up. Further research is needed to assess the true potential of the

  13. ANALISIS PERBAIKAN SISTEM PENTANAHAN TELEKOMUNIKASI

    Directory of Open Access Journals (Sweden)

    Umar Umar

    2015-04-01

    Hasil dari penelitian ini adalah perbaikan sistem pentanahan site Kampung Baru dengan menggunakan konfigurasi single point connection window (SPCW, untuk mengamankan sistem telekomunikasi dari kebocoran arus dan petir serta imbasnya.  Perbaikan sistem pentanahan di site Kampung Baru menggunakan banyak elektroda yang membentuk persegi dikarenakan topografi tempat di sana yang memungkinkan dan efektif adalah menggunakan sistem tersebut. Berdasarkan hasil analisis dan perhitungan perbaikan sistem di site Kampung Baru, didapatkan nilai perhitungan sistem pentanahan adalah 1.34 Ohm serta pengukurannya 1.21-1.25 Ohm.

  14. Semiotika Teks: Sebuah Pendekatan Analisis Teks

    Directory of Open Access Journals (Sweden)

    Yasraf Amir Piliang

    2004-12-01

    tanda-tanda yang membentuk apa yang disebut sebagai ‘teks’. Analisis teks, menurut Roland Barthes, akan menghasilkan makna denotatif, yakni makna tanda yang bersifat eksplisit, dan makna konotatif, yaitu makna tanda lapis kedua yang bersifat implisit.

  15. Critical analysis of the daylight saving time; Analisis critico al horario del verano

    Energy Technology Data Exchange (ETDEWEB)

    Romero Paredes Rubio, Hernando [Universidad Autonoma Metropolitana Ciudad-Ixtapalapa, Mexico, D.F., (Mexico)

    2001-07-01

    The critical analysis is presented as a synthesis of the problem untied since the implementation of the daylight saving time. The often related history is retaken to introduce the reader into the context of the causes of a such program. The geometric aspect of the solar trajectories is discussed and the length of the day as a function of the latitude and the time of the year to have technical elements for the time displacement in a certain region. The technical implementation of the daylight saving time based on three elements is justified: time of dawn and the decline (length of the day), national economic motivation and tourism industry. Stands out that although the daylight saving time schedule has a set of social and economic benefits it is not centered in the individual but in the society as a whole. The errors in handling the information and the misinformation are pointed out as the main causes of the controversy, the discord and the political manipulation of competing groups. [Spanish] El analisis critico se presenta como una sintesis del problema desatado desde la implementacion del horario de verano. La historia muchas veces contada se retoma para introducir al lector en el contexto de las causas de un tal programa. Se discute el aspecto geometrico de las trayectorias solares y la longitud del dia como una funcion de la latitud y de la epoca del ano para tener elementos tecnicos para el desplazamiento horario en una region determinada. Se justifica la implementacion tecnica del horario de verano en funcion de tres elementos: hora de alba y del ocaso (longitud del dia), motivacion economica nacional e industria turistica. Se destaca que si bien el horario de verano tiene un conjunto de beneficios sociales y economicos no se centra en el individuo sino en la sociedad en su conjunto. Se senalan los errores de manejo de la informacion y la desinformacion como los principales causantes de la polemica, el desacuerdo y la manipulacion politica de grupos

  16. Orbital computed tomography: technical aspects

    International Nuclear Information System (INIS)

    Beck, T.J.; Rosenbaum, A.E.; Miller, N.R.

    1982-01-01

    Computed tomographic scanning has revolutionized the diagnosis and management of orbital disease. The best use of this methodology requires knowledge of the principles and appropriate attention to scanning protocols. Computed tomographic scanning of the orbit is a demanding technique requiring thin sections through planes precisely positioned from the topographical anatomy. Ideally, orbital CT should include both transverse axial and coronal sections: The pathological condition and its plane of growth will influence the selection of the optimal plane or section. Coronal sections may be obtained either directly or indirectly by computer reconstruction from contiguous transverse images. Sagittal or oblique sections or both also are useful and may be obtained directly or indirectly. Difficulty in patient positioning may preclude direct sagittal imaging, however. The use of intravenous contrast enhancement is not necessary as a routine technique unless a mass is identified or suspected. Where surgical resection or biopsy of a space-occupying lesion is contemplated, contrast enhancement can be valuable in assessing relative vascularity and aiding diagnostic specificity. It should be continually emphasized that CT is a powerful technology which, in orbital diagnosis, produces the highest yield when clinician and radiologist collaborate in the radiodiagnostic workup. The clinical information supplied by the referring ophthalmologist is used by the radiologist both in the selection of the appropriate techniques for investigation and in striving to achieve the most specific conclusion

  17. Technical aspects of home hemodialysis

    Directory of Open Access Journals (Sweden)

    Alhomayeed B

    2009-01-01

    Full Text Available Home hemodialysis (HHD has proved to be a useful form of renal replacement therapy. The economic advantage of HHD is well established and interest in it is renewed. Once it has been decided to establish a HHD program, a well developed strategic plan is required. This should address financial and logistical issues and establish policies that will address responsi-bilities of both patients and HD centers. The recruitment of patients is facilitated by ensuring that all incident patients have early access to an education program describing all forms of renal replacement therapy that the regional renal program provides. Patients and members of the pre-dialysis education program should understand the selection process criteria in advance. Once the assessment is completed and the patient agrees to the proceedings, a plan of action should be esta-blished for enrolling the patient into the program and initiating training. Patients′ education pro-gram should take into consideration principles of adult learning. When choosing dialysis equip-ment for home use, the needs and preferences of the patients should be respected. As a rule of thumb, the equipment should be simple to use, yet still provide adequate and reliable therapy. De-ciding where to set up and position the HHD equipment is important. Installation of HHD ma-chine at home requires a continuous supply of accessories. Before establishing a HHD program, commitment of the dialysis center to provide and maintain the infrastructure of the program is mandatory. The estimated patients suitable for HHD are less than 15% of all prospective dialysis patients. Generally, those who are have greatly improved quality of life and by using modalities such as nocturnal and daily dialysis can have improved physical well-being with considerable potential cost savings.

  18. Technical aspects of home hemodialysis.

    Science.gov (United States)

    Alhomayeed, B; Lindsay, R M

    2009-03-01

    Home hemodialysis (HHD) has proved to be a useful form of renal replacement therapy. The economic advantage of HHD is well established and interest in it is renewed. Once it has been decided to establish a HHD program, a well developed strategic plan is required. This should address financial and logistical issues and establish policies that will address responsi-bilities of both patients and HD centers. The recruitment of patients is facilitated by ensuring that all incident patients have early access to an education program describing all forms of renal replacement therapy that the regional renal program provides. Patients and members of the pre-dialysis education program should understand the selection process criteria in advance. Once the assessment is completed and the patient agrees to the proceedings, a plan of action should be esta-blished for enrolling the patient into the program and initiating training. Patients' education pro-gram should take into consideration principles of adult learning. When choosing dialysis equip-ment for home use, the needs and preferences of the patients should be respected. As a rule of thumb, the equipment should be simple to use, yet still provide adequate and reliable therapy. De-ciding where to set up and position the HHD equipment is important. Installation of HHD ma-chine at home requires a continuous supply of accessories. Before establishing a HHD program, commitment of the dialysis center to provide and maintain the infrastructure of the program is mandatory. The estimated patients suitable for HHD are less than 15% of all prospective dialysis patients. Generally, those who are have greatly improved quality of life and by using modalities such as nocturnal and daily dialysis can have improved physical well-being with considerable potential cost savings.

  19. Risk analysis; Analisis de riesgos

    Energy Technology Data Exchange (ETDEWEB)

    Baron, J H; Nunez McLeod, J; Rivera, S S [Universidad Nacional de Cuyo, Mendoza (Argentina). Instituto de Capacitacion Especial y Desarrollo de Ingenieria Asistida por Computadora (CEDIAC)

    1997-07-01

    This book contains a selection of research works performed in the CEDIAC Institute (Cuyo National University) in the area of Risk Analysis, with specific orientations to the subjects of uncertainty and sensitivity studies, software reliability, severe accident modeling, etc. This volume presents important material for all those researches who want to have an insight in the risk analysis field, as a tool to solution several problems frequently found in the engineering and applied sciences field, as well as for the academic teachers who want to keep up to date, including the new developments and improvements continuously arising in this field. [Spanish] Este libro contiene una seleccion de trabajos de investigacion realizados dentro del Instituto de Capacitacion Especial y Desarrollo de la Ingenieria Asistida por Computadora en el area del analisis de riesgos, con una orientacion hacia el estudio de incertidumbres y sensibilidad, confiabilidad de software, modelacion de accidentes severos, etc. Este volumen recoge un material de indudable importancia e interes para todos aquellos investigadores y profesionales que desean incursionar en este campo del analisis de riesgos como herramienta para la solucion de problemas frecuentemente encontrados en la ingenieria y las ciencias aplicadas, asi como para los academicos que desean mantenerse al dia, conociendo los nuevos desarrollos y tecnicas que constantemente aparecen en su area.

  20. Analisis Kebijakan dan Efektivitas Organisasi

    Directory of Open Access Journals (Sweden)

    Amir Syarifudin Kiwang

    2015-05-01

    Full Text Available Penerapan Peraturan Gubernur Nusa Tenggara Timur Nomor 8 Tahun 2011 tentang Organisasi dan Tata Kerja Unit Pelaksana Teknis Pendidikan dan Pelatihan Koperasi dan Usaha Mikro Kecil dan Menengah pada Dinas Koperasi dan Usaha Mikro Kecil dan Menengah Provinsi Nusa Tenggara Timur adalah dalam rangka untuk meningkatkan efektivitas kerja organisasi pada UPT Diklat Koperasi dan UMKM. Penelitian ini berusaha untuk melihat dampak kebijakan organisasi terhadap efektivitas organisasi dengan menggunakan enam elemen variabel dari kebijakan dan praktik manajemen. Keenam elemen tersebut adalah penetapan tujuan strategis, pencarian dan pemanfaatan sumber daya, lingkungan prestasi, proses komunikasi, kepemimpinan dan pengambilan keputusan, serta adaptasi dan inovasi organisasi. Penelitian kualitatif ini menggunakan pendekatan studi kasus. Teknik analisis data yang digunakan adalah analisis data model Miles dan Huberman, yang terdiri atas reduksi data, display/penyajian data, dan kesimpulan/verifikasi. Hasil penelitian menunjukkan bahwa efektivitas organisasi pada UPT Diklat koperasi dan UMKM belum berjalan secara baik, hal ini dapat dilihat dari beberapa hal antara lain, belum adanya tenaga spesialisasi pengelola diklat dan tenaga khusus (sarjana di bidang perkoperasian dan kondisi lingkungan kerja (lingkungan prestasi pada UPT Diklat koperasi dan UMKM yang belum efektif. Penempatan pegawai juga belum tepat, mutasi ke UPT Diklat Koperasi dan UMKM tidak memperhatikan latar belakang pendidikan dan spesialisasi/keahlian pegawai sehingga membutuhkan waktu dalam proses penyesuaian serta menurunkan jumlah pelaksanaan diklat dikarenakan keterbatasan alokasi dana.

  1. ANALISIS DAYA SAING KEDELAI INDONESIA

    Directory of Open Access Journals (Sweden)

    Sarwono Sarwono

    2014-09-01

    Full Text Available RCA (Revealed Comparative Advantage index of soybean in Indonesia from 1983 up to 2013 is less than one, mostly. It means that the competitiveness of soybean in Indonesia is low. The purpose of this study is to analyze the factors influence the soybean competitiveness. OLS (Ordinary Least Square was used as the analysis method. Hypotheses test based on that analysis model is not bias, so that, classic divergence test is needed. It is for getting the Best Linier Unbiased Estimator (BLUE appraisal. T statistic and F statistic were also applied. The result of this research shows that production and export have positive and significant influence. In addition, exchange rate and government policy do not influence the Indonesia soybean competitiveness.Indeks RCA (Revealed Comparative Advantage kedelai Indonesia dari tahun 1983-2013 kecenderungan bernilai kurang dari satu yang berarti daya saing kedelai Indonesia rendah.Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi daya saing kedelai Indonesia.Metode analisis yang digunakan adalah Ordinary Least Square (OLS.Pengujian hipotesis berdasarkan model analisis tersebut tidak bias maka perlu dilakukan uji penyimpangan klasik yang tujuannya agar diperoleh penaksiran yang bersifat Best Linier Unbiased Estimator (BLUE.Pengujian statistik menggunakan uji t statistikdan uji f statistik.Hasil penelitian ini menunjukkan bahwa produksi dan ekspor berpengaruh secara positif dan signifikan terhadap daya saing kedelai Indonesia. Nilai tukar rupiah dan kebijakan pemerintah tidak berpengaruh terhadap daya saing kedelai Indonesia.

  2. Analisis Harmonisa Inverter PWM Satu Fasa

    OpenAIRE

    Rejeki Simanjorang

    2008-01-01

    Pada tesis ini dianalisis harmonisa inverter PWM satu fasa. Inverter PWM satu fasa yang akan ditinjau adalah inverter satu fasa jembatan penuh (konvensional) dan inverter komposit. Analisis difokuskan pada penentuan pola penyaklaran yang optimum agar pembangkitan harmonisa dan switching losses inverter rendah. Untuk menentukan pola penyaklaran optimum maka dilakukan analisis yang berbasis pada rangkaian ekivalen harmonisa inverter satu fasa. Dengan menggunakan pola penyaklaran optimum, kedua ...

  3. Knowledge regarding technical aspects of non-surgical root canal treatment in Al-Madinah Al-Munawarah private dental centers

    Directory of Open Access Journals (Sweden)

    Mothanna Alrahabi

    2015-01-01

    Full Text Available Objective: We evaluated knowledge of technical aspects of non-surgical root canal treatment among general dentists in private dental clinics in Al-Madinah Al-Munawarah, Saudi Arabia. Materials and Methods: A questionnaire was distributed randomly to 70 general dental practitioners who were working in private dental centers. The response rate was 88.6%. Results: The results showed that only 3% of dentists were using rubber dams for isolation during endodontic treatment. The majority (59.7% were using radiographs to determine the length. Also, 37% were using nickel-titanium (NiTi rotary instruments to prepare the root canal. The lateral condensation technique with gutta percha points to fill the root canal was used by most respondents (77.5%. Conclusions: This study provides important data on endodontic treatment by general dental practitioners in Al-Madinah Al-Munawarah private dental centers. It shows a general lack of knowledge regarding the importance of using rubber dams as well as the new endodontic materials and methods. Continuing education programs to update their knowledge in the field of endodontics are essential.

  4. Conceptual aspects: analyses law, ethical, human, technical, social factors of development ICT, e-learning and intercultural development in different countries setting out the previous new theoretical model and preliminary findings

    NARCIS (Netherlands)

    Kommers, Petrus A.M.; Smyrnova-Trybulska, Eugenia; Morze, Natalia; Issa, Tomayess; Issa, Theodora

    2015-01-01

    This paper, prepared by an international team of authors focuses on the conceptual aspects: analyses law, ethical, human, technical, social factors of ICT development, e-learning and intercultural development in different countries, setting out the previous and new theoretical model and preliminary

  5. ANALISIS KEBUTUHAN PENDIDIKAN MASYARAKAT

    Directory of Open Access Journals (Sweden)

    Amin Yusuf

    2014-02-01

    Full Text Available Based on a belief that in order to assist in community development with appropriate education, the need for a research study that examined a variety of community needs for education and solutions. On the belief, the research with the above title aims to: (1 analyze the various needs education is urgent, and immediate solution can be resolved by the people in the village Kandri and (2 implementing affirmative action, mentoring programs and management of village libraries learning model for functional literacy tutors as a solution. Participatory methods or PRA, with the tools bervariatif data collectors, such as in-depth interviews, brainstorming, patisipatif observation, and documentation is a method used in the study. The results showed that, the library management assistance programs and rural development model functional literacy learning is an effective solution of many aspects that have been identified. The program can improve quality and expand access to coverage of services of non-formal education, and increase community participation in education development.

  6. ANALISIS IMPOR BERAS DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Ratih Kumala Sari

    2014-10-01

    Full Text Available Abstrak ___________________________________________________________________ Salah satu kebijakan pemerintah untuk memenuhi kebutuhan beras yaitu dengan menggenjot produksi beras dalam negeri. Namun dengan semakin meningkatnya jumlah penduduk akan meningkatkan permintaan terhadap beras dan upaya peningkatan produktivitas dalam negeri tidak dapat memenuhi kebutuhan beras dalam negeri. Sehingga untuk menutupi kekurangan tersebut pemerintah mengambil keputusan untuk melakukan impor beras dari negara lain. Akan tetapi pada kenyataannya impor beras dilakukan ketika data statistik menunjukkan bahwa Indonesia sedang mengalami surplus beras. Penelitian ini bertujuan untuk mengetahui faktor-faktor apa saja yang mempengaruhi impor beras di Indonesia. Metode analisis yang digunakan adalah analisis regresi linier berganda dengan model Error Correction Model (ECM. Berdasarkan hasil penelitian disimpulkan bahwa secara parsial maupun secara bersama-sama produksi beras, konsumsi beras, harga beras dalam negeri dan nilai tukar rupiah terhadap dollar AS berpengaruh dan signifikan terhadap impor beras di Indonesia. Abstract ___________________________________________________________________ One of the government’s policy to fulfill the need of rice is to boost the domestic production. However, by increasing the population, the demand of rice will also increase and the effort of increasing the domestic productivity cannot supply domestic rice need. So, to cover the shortage the government make decision to import rice from other countries. Yet, in fact importing rice is occurred when the statistical data showed that the supply of rice in Indonesia is surplus. The purpose of this research is necessary to study the factors which influence the import of rice in Indonesia. The analysis method used is multiple linear regression analysis model with Error Correction Model (ECM. Based on the research proven that partially or jointly the production, the consumption, the

  7. ASPECTS REGARDING THE METHOD OF REALIZING THE TECHNICAL EXPERTISE FOR REPAIRING THE TRANSLATION MECHANISM OF A M4A COAL-MINING MACHINE

    Directory of Open Access Journals (Sweden)

    Marius Liviu CÎRȚÎNĂ

    2018-05-01

    Full Text Available This paper presents the technical state of the mechanism of translation of the coalmining machine after the technical expertise. The rehabilitation to which the translation mechanism will be subjected will be carried out by performing the intervention works that will bring back into the normal operating parameters both the structural part and the functional part. The paper presents: the proposed solutions for repair after verification of the translation mechanism and the way of repairing the mechanism.

  8. Analisis Value Chain Di Industri Otomotif

    OpenAIRE

    Hendri, Hendri

    2017-01-01

    Penelitian ini untuk menganalisis industri otomotif. Tujuan dari penelitian ini adalah untuk menganalisis dan mengetahui aktivitas dan kondisi internal proses industri manufaktur dengan menggunakan value chain guna masukan dimasa akan datang bagi industri otomotif secara khusus. Value Chain merupakan rantai nilai yang dapat mengetahui kekuatan Perusahaan, keuntungan dan kesuksesan dari rantai aktivitas dalam Perusahaan atau industri manufaktur.Metode analisis menggunakan Statistika Deskript...

  9. ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI

    Directory of Open Access Journals (Sweden)

    Azizul Khakim

    2015-10-01

    Full Text Available ABSTRAK ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI. Bulk shielding merupakan fasilitas yang terintegrasi dengan reaktor Kartini yang berfungsi sebagai penyimpanan sementara bahan bakar bekas. Fasilitas ini merupakan fasilitas yang termasuk dalam struktur, sistem dan komponen (SSK yang penting bagi keselamatan. Salah satu fungsi keselamatan dari sistem penanganan dan penyimpanan bahan bakar adalah mencegah kecelakaan kekritisan yang tak terkendali dan membatasi naiknya temperatur bahan bakar. Analisis keselamatan paling kurang harus mencakup analisis keselamatan dari sisi neutronik dan termo hidrolik Bulk shielding. Analisis termo hidrolik ditujukan untuk memastikan perpindahan panas dan proses pendinginan bahan bakar bekas berjalan baik dan tidak terjadi akumulasi panas yang mengancam integritas bahan bakar. Code tervalidasi PARET/ANL digunakan untuk analisis pendinginan dengan mode konveksi alam. Hasil perhitungan menunjukkan bahwa mode pendinginan konvekasi alam cukup memadai dalam mendinginkan panas sisa tanpa mengakibatkan kenaikan temperatur bahan bakar yang signifikan. Kata kunci: Bulk shielding, bahan bakar bekas, konveksi alam, PARET.   ABSTRACT THERMAL HYDRAULIC SAFETY ANALYSIS OF BULK SHIELDING KARTINI REACTOR. Bulk shielding is an integrated facility to Kartini reactor which is used for temporary spent fuels storage. The facility is one of the structures, systems and components (SSCs important to safety. Among the safety functions of fuel handling and storage are to prevent any uncontrolable criticality accidents and to limit the fuel temperature increase. Safety analyses should, at least, cover neutronic and thermal hydraulic calculations of the bulk shielding. Thermal hydraulic analyses were intended to ensure that heat removal and the process of the spent fuels cooling takes place adequately and no heat accumulation that challenges the fuel integrity. Validated code, PARET/ANL was used for analysing the

  10. ANALISIS FAKTOR-FAKTOR YANG MENIMBULKAN KECENDERUNGAN MINAT BELI KONSUMEN SARUNG (Studi Perilaku Konsumen Sarung di Jawa Timur

    Directory of Open Access Journals (Sweden)

    Ujianto Ujianto

    2004-01-01

    Full Text Available Focusing the problem on the research factors that cause buying interest of sarong is how large the total variance explaining the preference of buying interest of sarong. This research was purposed to identify the preferent and dominant factors of buying interest. Decision making process of buying is begun by marketing stimulant (product, price, promotion, place and other stimulants (economic, technology, politic culture, which build buyer characteristics. Those aspects above build customer perception about the clothes dressing and customer will recognize what's characteristic of cloth they need. The research was in Pasuruan and Gresik, in order to get non probability purpossive sample, by questionaring to 120 respondents. Each respondent was asked to judge his preference by choosing from fully agree till fully disagree gradually of six alternatives of Likert scale. Primary data were collected and analyzed by using the technics of Factor Analysis and Descriptive Analysis. To make the analysis running well used SPSS Program. The result of this research conclude that the preferent factors of buying interest of customer are Quality, Reference, Brand and Colour, Packaging and Price, Discount and Gift, and Supplies Factors. And the dominant factors are Quality and Reference Factors. Abstract in Bahasa Indonesia : Fokus penelitian ini adalah faktor-faktor apa yang menimbulkan kecenderungan minat beli konsumen terhadap produk sarung. Tujuan penelitian untuk mengidentifikasi faktor-faktor yang dipertimbangkan oleh konsumen untuk membeli produk sarung. Secara teoritik dapat dijelaskan bahwa proses pengambilan keputusan pembelian didahului oleh stimuli pemasaran dan stimuli lainnya yang dapat mempengaruhi minat beli sarung calon konsumen. Penelitian dilakukan di Gresik dan Pasuruan dan pengambilan sampel dilakukan secara purposive dan data dikumpulkan melalui kuesioner kepada sebanyak 120 responden. Kuesioner disusun dalam bentuk Skala Likert dan data

  11. Technical evaluation of the electrical, instrumentation, and control design aspects of the override of containment purge valve isolation and other engineered safety feature signals for the Fort Calhoun Nuclear Power Plant

    International Nuclear Information System (INIS)

    Hackett, D.B.

    1980-01-01

    This report documents the technical evaluation of the electrical, instrumentation, and control design aspects of the override of containment purge valve isolation and other engineered safety feature signals for the Fort Calhoun nuclear power plant. The review criteria are based on IEEE Std-279-1971 requirements for the safety signals to all purge and ventilation isolation valves. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Program being conducted for the US Nuclear Regulatory Commission by Lawrence Livermore Laboratory

  12. Technical aspects of X-ray micro-computed tomography. Initial experience of 27-μm resolution using feldkamp cone-beam reconstruction

    International Nuclear Information System (INIS)

    Yamamoto, Shuji; Suzuki, Masahiro; Kohara, Kazushi; Iinuma, Gen; Moriyama, Noriyuki

    2007-01-01

    The objective of this study was to introduce the technical utility of micro-computed tomography (CT) with 27-μm resolution by cone-beam CT algorithm. Whole-body micro-CT scans were performed to honeybee. Two- and three-dimensional image analyses were performed by originally developed and available open-source software for acquired images. The original contribution of this work is to describe the technical characteristics of the X-ray micro-CT system, keeping a small experimental insect in a unique condition. Micro-CT may be used as a rapid prototyping tool to research and understand the high-resolution system with Feldkamp cone-beam reconstruction. (author)

  13. ON THE NECESSITY OF CHANGES IN THE STRATEGY OF UTILIZATION SHIP BOILER TECHNICAL CONDITION MAINTENANCE IN THE ASPECT OF LNG APPLIED AS FUEL

    Directory of Open Access Journals (Sweden)

    Andrzej ADAMKIEWICZ

    2017-01-01

    Full Text Available Heavy oils (HFO fuels used on ships play a part in degradation of technical condition of heat exchange surfaces of utiliza-tion boilers especially on the exhaust gas side. Presence of sulphur in these fuels is the main factor favouring degrada-tion. The upper limit for sulphur content in the fuel used outside the SECA areas equal to 3.5% is currently in force, at least until the year 2020 or 2025. The recommended by classification societies overhauls of utilization boilers are, there-fore characterized by a specially chosen strategy thanks to which it is possible to maintain their appropriate technical condition. The requirement to use fuels with low sulphur content (LSFO, which are significantly more expensive than MDO fuels, in the areas of controlled sulphur emissions also led to a further introduction of alternative fuels, such as methanol and above all liquefied natural gas (LNG, onto ships. That is especially valid for the ship owners whose vessels e.g. ferries sail mainly within SCECA This article analyses the consequences of the introduced fuel change on utilization boiler maintenance. A change in the technical condition maintenance strategy for utilization boilers has been suggested.

  14. Critical Success Factors for the Large-Scale Introduction of Grid-Connected Photovoltaic Systems. A survey focusing on the non-technical aspects

    International Nuclear Information System (INIS)

    Groenendaal, B.J.; De Lange, T.J.; Lako, P.; Van Roosmalen, J.A.M.; Tool, C.J.J.; De Wild-Scholten, M.J.

    2000-11-01

    The differences in Significance and Status of 15 factors that might be of decisive influence in achieving a large-scale market introduction of grid-connected photovoltaic (PV) systems are analyzed. As a research method the opinions of PV experts and persons involved in the implementation of PV have been surveyed. A questionnaire was sent to about 300 persons all over the world (America, Europe and Asia). The methods applied to analyze the returned questionnaires can be divided into a comparing method (Mann-Whitney test) and ranking methods (Friedman test and the Medal-Classification test). One of the main conclusion is that the ranking of the main critical success factors on Significance shows no large differences between the American and European respondents. The answers from the American and European respondents show that the technical and financial factors are the most Significant: RD and D, technical reliability, financing and cost reduction. The Asian ranking does differ from the American and European ranking. The answers from the Asian respondents show that the international factors: global developments and internationalisation together with specialist knowledge and image are the most Significant success factors. Another main conclusion is that the three regions differ in the ranking of the actual Status of the factors. A comparison of the American ranking with the Asian ranking show the largest differences, whereas Europe is taking an intermediary position. Another interesting observation is that the Status of factors, e.g. internationalisation, global developments and the technical/commercial network, are considered more positive in America, whereas Asia and Europe are more positive about the factors RD and D, image and financing. More specific conclusions show that there is a significant difference in answers between the American and European respondents about the Significance of the factor cost reduction. There is also a significant difference between the

  15. AICE Survey of USSR Air Pollution Literature, Volume 12: Technical Papers from the Leningrad International Symposium on the Meteorological Aspects of Atmospheric Pollution, Part I.

    Science.gov (United States)

    Nuttonson, M. Y.

    Twelve papers dealing with the meteorological aspects of air pollution were translated. These papers were initially presented at an international symposium held in Leningrad during July 1968. The papers are: Status and prospective development of meteorological studies of atmospheric pollution, Effect of the stability of the atmosphere on the…

  16. AICE Survey of USSR Air Pollution Literature, Volume 15: A Third Compilation of Technical Reports on the Biological Effects and the Public Health Aspects of Atmospheric Pollutants.

    Science.gov (United States)

    Nuttonson, M. Y.

    Ten papers were translated: Maximum permissible concentrations of noxious substances in the atmospheric air of populated areas; Some aspects of the biological effect of microconcentrations of two chloroisocyanates; The toxicology of low concentrations of aromatic hydrocarbons; Chronic action of low concentrations of acrolein in air on the…

  17. AICE Survey of USSR Air Pollution Literature, Volume 14: Technical Papers from the Leningrad International Symposium on the Meteorological Aspects of Atmospheric Pollution, Part 3.

    Science.gov (United States)

    Nuttonson, M. Y.

    Fifteen papers were translated: On the removal of impurities from the atmosphere by clouds and precipitation; Some aspects of the adoption of automatic methods of determining atmospheric pollutants; Recording of sulfur dioxide content at the outskirts of a city. Comparison of measurement results for a valley and an elevation; Theoretical and…

  18. Analisis Kinerja Local Area Network Menggunakan Router.

    OpenAIRE

    Hutahaean, Yosua

    2012-01-01

    Perangkat internetworking menawarkan komunikasi di antara segmen Local Area Network (LAN). Ada empat tipe utama perangkat internetworking ini: repeater, bridge, router, dan gateway. Perangkat ini dibedakan atas dasar system lapisan Open System Interconnection (OSI) yang digunakan, berfungsi sebagai media komunikasi dari LAN ke LAN. Pada Tugas Akhir ini penulis tertarik untuk membahas analisis kinerja Local Area Network (LAN) menggunakan Router yang menggunakan sistem antrian M/M/1 dimana j...

  19. Technical Elements (CCT1)

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

    2017-01-01

    Many of the aspects dealt with in the CA EPBD are closely interlinked with each other and may refer to both new and existing buildings, as well as to inspection and certification. This is also true for technical aspects, such as the calculation methodologies, and how to include technical systems......’ efficiency or how to integrate renewable energy within them. The central team for Technical Elements deals with issues of a technical nature, which are common to new and existing buildings, and/or with minimum demands, certification and inspection. This report focuses on the implementation of Articles 3, 4...

  20. Some physico-technical aspects of the new generation of self-calibrated alanine/EPR dosimeter and results from the international intercomparison trial

    International Nuclear Information System (INIS)

    Yordanov, N.D.; Gancheva, V.

    2000-01-01

    Some physico-technical parameters of the self-calibrated alanine/EPR dosimeters are described. Principally, this new type of solid state/EPR dosimeter contains radiation sensitive diamagnetic material (in the present case, alanine), some quantity of EPR active, but radiation insensitive, substance (for example, Mn 2+ /MgO) playing roles of an internal standard and a binding material. Thus with this dosimeter the EPR spectra of alanine and the internal standard Mn 2+ are recorded simultaneously and the dose response is represented as a ratio of EPR signal intensities of alanine versus Mn 2+ as a function of absorbed dose. As a result, the data of the present study have shown that there is practically no interference of the dosimeter EPR response (expressed as the ratio I alanine /I Mn ) from the way of preparation (homogeneity), behavior after irradiation (fading of EPR signals with time, influence of different meteorological conditions) as well as specific spectrometer setting conditions. These dosimeters show satisfactory reproducibility of preparation and reading as well as stability on keeping. Thus, fulfilling the described physico-technical data of this type of dosimeters, the reproducibility of the readings is significantly improved particularly when intercomparison among different laboratories is performed. This conclusion is confirmed by independent studies of the described self-calibrated alanine/EPR dosimeters in several laboratories in Europe. Results of which are also reported. (author)

  1. Feeding biogas onto the national gas grid - Technical and economical aspects on omitting propane addition; Inmatning av biogas paa naturgasnaetet - Tekniska och ekonomiska aspekter paa slopad propantillsats

    Energy Technology Data Exchange (ETDEWEB)

    Nelsson, Corfitz

    2012-07-01

    Biogas injection into the natural gas grid is a common practice in Sweden today. In order to condition the biogas to the quality matching the natural gas, propane (approx. 8 %) is injected in the biogas. This is a costly procedure which also introduces fossil components into a renewable gas flow. Because of this, it is desired to terminate the propane injection and inject biogas straight into the gas grid. This might affect certain customers and will affect billing procedures and this study has briefly examined the impact of injection of biogas in the gas grid without propane addition. The main findings are: 1. It seems technically possible to inject biogas without propane into the gas grid. Attention has to be paid to the quality requirements of certain sensitive customers, but most customers can accept the quality variations. 2. It is recommended that the minimum methane content of injected biogas is raised to 98 %. This might affect the operation and choice of upgrading equipment and will have to be evaluated from both a technical and an economical viewpoint in each case. 3. Downgrading the natural gas to biogas quality by air injection is not an option. 4. In order to make simplify billing procedures, the geographic location of biogas site injecting gas into the distribution network is crucial. The biogas site should be placed as close to the transmission network as possible. Further, two case studies concerning biogas injection into the transmission network are briefly discussed.

  2. Energy conservation analysis using Fuzzy logic considering technical and environmental aspects; Analise da conservacao de energia utilizando logica fuzzy considerando aspectos tecnicos e o meio ambiente

    Energy Technology Data Exchange (ETDEWEB)

    Haddad, Jamil; Yamachita, Roberto Akira; Guardia, Eduardo Crestana [Universidade Federal de Itajuba (UNIFEI), MG (Brazil). Centro de Excelencia em Eficiencia Energetica; Reis, Alexandre de Souza Rodrigues dos; Pinto, Luiz Fernando do Monte [Furnas Centrais Eletricas, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This article presents the results obtained in the Project of Research and Development of Furnas Centrais Eletricas, which was accomplished with the partnership of the Fundacao de Pesquisa e Assessoramento a Industria - FUPAI. This project analyzed technically and economically the pollution caused in the electric net by the use, in growing scale, of nonlinear loads, such as: compact fluorescent lamps, microwave ovens, VHS systems, DVD, sound systems, etc. It was also analyzed the environmental impact caused by these lamps due to the presence of the mercury; and as complement to the traditional theory of economical analysis, a tool of economical analysis was developed using the theory of fuzzy sets for the uncertainty variables or of difficult quantification. (author)

  3. Caffeine ingestion changes time-motion and technical-tactical aspects in simulated boxing matches: A randomized double-blind PLA-controlled crossover study.

    Science.gov (United States)

    Coswig, Victor Silveira; Gentil, Paulo; Irigon, Francine; Del Vecchio, Fabrício Boscolo

    2018-05-08

    The number of offensive actions and glycolytic energy in combat sports both increase with caffeine (CAF) ingestion. In addition, the effects of CAF on technical-tactical and time-motion analysis and physiological parameters in boxing are unknown. This study aimed to investigate the effects of CAF ingestion on physiological parameters and the notational analysis of boxing matches. Ten male boxers were recruited; the participants ingested 6 mg kg -1 BM of CAF or placebo (PLA) 30 min prior to the match in a crossover design. Heart rate (HR) and rate of perceived exertion (RPE) were collected before and after each of three 2 min rounds, interspersed by 1-min recovery; the matches were recorded for notational analysis. A two-way ANOVA for repeated measures was used for the physiological variables, and a three-way ANOVA with repeated measures was used for technical-tactical and time-motion variables. Statistical differences were found for HR and RPE between rounds (F (6, 54)  = 131.3, p = .001; [Formula: see text] = 0.93 and F (2, 18)  = 40.6, p = .001; [Formula: see text] = 0.81, respectively) but not between conditions (F (1, 9)  = 0.46; p = .51; [Formula: see text] = 0.05 and F (1, 9)  = 0.02, p = .89; [Formula: see text] = 0.002, respectively). The CAF condition induced a greater duration of interaction blocks (CAF = 6.5 ± 1.8 s; PLA = 4.4 ± 0.9 s; p = .01). Effort:pause ratio was 4.4 s:8.7 s (approx. 1:2) for PLA and 6.5 s:9.4 s (1:1.44) for CAF, which were significantly different (p boxing matches induces a greater duration of high-intensity actions, with no effects on internal load markers.

  4. ANALISIS SEGMENTASI PENONTON BIOSKOP YOGYAKARTA

    Directory of Open Access Journals (Sweden)

    Dyna Herlina Suwarto

    2016-12-01

    Full Text Available After the long period of the cinema industry decline, the number of audience who visit cinema increases significantly. However, the research to examine the phenomena of audience segmentation is very few. Therefore the study aim is to investigate cinema audience segmentation in Yogyakarta on the basis of the aspects that affects the audience film choice. Furthermore the mix-method approach combining qualitative and quantitative method in sequence was employed to attain the research objective. For the first step, three focus group discussions that involve 20 informants. The second step, survey was conducted involving 454 respondents. The result indicates that there are two different audience segments according their behaviors. The first segment visits the cinema as fun activities in their spare time meanwhile the second segment considers the activity as a cultural interest in order to enjoy the narrative and artistic aspects of a film

  5. LA COMUNICAZIONE POLITICA SUI SOCIAL NETWORK: UN’ANALISI LINGUISTICA

    Directory of Open Access Journals (Sweden)

    Daniele Spoladore

    2014-07-01

    Full Text Available Questo lavoro si propone di analizzare le scelte linguistiche dei soggetti politici che utilizzano Facebook e Twitter per rivolgersi al sempre più frammentato panorama dei potenziali elettori. In particolare, analizza le tendenze linguistiche comuni che questi social network hanno fatto emergere nel rapporto tra politica, web e lettori. Cominciando dall’analisi della presenza di parlamentari e senatori su Facebook e Twitter, si cerca di riassumere le principali caratteristiche delle due piattaforme, per giungere ad una classificazione dei testi prodotti attraverso di esse; si analizza la scrittura di post e tweet, sottolineando la presenza di espedienti tipici del mezzo e valutando il loro effetto sui lettori, e si studiano le scelte sintattiche e morfosintattiche in relazione alla struttura e alle possibilità dei due social network. In ultima analisi si osservano le scelte lessicali dei soggetti politici, studiandone i campi semantici e la quantità di tecnicismi. Infine, si cerca di compiere una valutazione delle due differenti tipologie di trasmesso scritto rinvenute nei campioni, osservando come ognuna di esse abbia uno scopo ben preciso nell’economia della comunicazione politica sui social network. Political communication policy in social networks: a language analysis  Daniele Spoladore This paper aims to analyze the linguistic choices of politicians who use Facebook and Twitter to address the increasingly fragmented landscape of potential voters. In particular, it analyzes the common language trends that these social networks have revealed in the relationship between politics, the web and readers. Starting from the analysis of the presence of MPs and senators on Facebook and Twitter, we try to summarize the key features of the two platforms, in order to arrive at a classification of the texts produced using them.  We analyzed posts and tweets, emphasizing the  typical characteristics of these means and evaluating their effect on

  6. Studies for the layout and technical conception of a two-circuit HTR power plant of 600 MWsub(el) under public utilizer aspects

    International Nuclear Information System (INIS)

    Schuetten, R.

    1981-01-01

    In this study concerning conceptions for a nuclear power plant of 600 MWsub(el) with high-temperature reactor a conception for a HTR-nuclear power plant of 600 MWsub(el) to be built in the Federal Republic of Germany in future is developed on the basis of operating experience with the 15-MW-AVR-experimental nuclear power plant, the construction of the THTR-300 nuclear power plant and the gas-cooled reactors of English, French and American origin. This report gives a survey of the most important findings and the requirements on behalf of the public utilities for a nuclear power plant with high-temperature reactor with the dimensions of 600 MWsub(el). The examination of the utilities basic requirements for a power plant and the experience made during the licensing procedure led to this technical and safety conception for a HTR nuclear power plant with spherical fuel elements. In addition, the questions of the possibility of recurrent tests and of repairing safety components and also the future shut-down of the power plant, which are important for the public utilities, are examined. (orig./GL) [de

  7. Technical aspects of the integration of three-dimensional treatment planning dose parameters (GEC-ESTRO Working Group) into pre-implant planning for LDR gynecological interstitial brachytherapy.

    Science.gov (United States)

    Chi, A; Gao, M; Nguyen, N P; Albuquerque, K

    2009-06-01

    This study investigates the technical feasibility of pre-implant image-based treatment planning for LDR GYN interstitial brachytherapy(IB) based on the GEC-ESTRO guidelines. Initially, a virtual plan is generated based on the prescription dose and GEC-ESTRO defined OAR dose constraints with a pre-implant CT. After the actual implant, a regular diagnostic CT was obtained and fused with our pre-implant scan/initial treatment plan in our planning software. The Flexi-needle position changes, and treatment plan modifications were made if needed. Dose values were normalized to equivalent doses in 2 Gy fractions (LQED 2 Gy) derived from the linear-quadratic model with alpha/beta of 3 for late responding tissues and alpha/beta of 10 for early responding tissues. D(90) to the CTV, which was gross tumor (GTV) at the time of brachytherapy with a margin to count for microscopic disease, was 84.7 +/- 4.9% of the prescribed dose. The OAR doses were evaluated by D(2cc) (EBRT+IB). Mean D(2cc) values (LQED(2Gy)) for the rectum, bladder, sigmoid, and small bowel were the following: 63.7 +/- 8.4 Gy, 61.2 +/- 6.9 Gy, 48.0 +/- 3.5 Gy, and 49.9 +/- 4.2 Gy. This study confirms the feasibility of applying the GEC-ESTRO recommended dose parameters in pre-implant CT-based treatment planning in GYN IB. In the process, this pre-implant technique also demonstrates a good approximation of the target volume dose coverage, and doses to the OARs.

  8. Roman wall-painting technical aspects | Aspectos técnicos de la pintura mural romana | Aspectos técnicos de la pintura mural romana

    Directory of Open Access Journals (Sweden)

    Lorenzo Abad Casal

    1982-12-01

    Full Text Available Se estudian diversos aspectos técnicos de la pintura mural romana: composición de los morteros, sistemas de unión entre las diversas capas, trazados previos, técnica pictórica y técnicas de conservación y restauración. Todo ello se plasma en una serie de gráficas que ilustran las técnicas romanas y su evolución a través de los siglos. | Etude des divers aspects techniques de la peinture murale romainne: composition des mortiers, systèmes d'union entre les différents couches, dessins préparatoires, technique de la peinture et procedés de conservation et de restauration. Un resumé sous forme graphique permet une vision synoptique de l'évolution des techniques de peinture romaine au cours des siècles.

  9. Teaching Technical Writing - Towards Technical Writing

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2000-01-01

    In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm that ...... of technical writing.......In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...

  10. Récupération assistée des hydrocarbures par injection de CO2. Aspects techniques et économiques Enhanced Hydrocarbon Recovery by CO2 Flooding. Technical and Economic Aspects

    Directory of Open Access Journals (Sweden)

    Simandoux P.

    2006-11-01

    Full Text Available L'injection de gaz carbonique dans les gisements pétroliers a donné lieu depuis une quinzaine d'années à de très nombreuses études de laboratoire et sur modèles. De multiples pilotes ont été réalisés et quelques projets industriels sont en cours. II est donc intéressant de faire un bilan des connaissances et de l'expérience ainsi acquise, afin de tenter de dégager les perspectives de développement du procédé. La première partie rappelle le comportement du CO2 en présence d'hydrocarbures et les principaux mécanismes d'action dans le processus de récupération. On examine ensuite dans une deuxième partie les principales applications pilotes ou industrielles et les problèmes opérationnels rencontrés. Ce bilan permet de dégager les caractéristiques principales du procédé, les difficultés essentielles rencontrées. Un aperçu est donné sur les recherches en cours en vue de résoudre ces difficultés et améliorer le procédé. La dernière partie s'attache à préciser les perspectives d'application de l'injection de CO2 et pour cela trois aspects essentiels pour le développement du procédé sont discutés : les performances et le domaine d'emploi, la disponibilité et le coût des différentes sources potentielles de CO2 et enfin l'évaluation économique du procédé. The injection of carbon dioxide into oil fields has been the subject of extensive laboratory and modeling research for the last 15 years. Many pilot experiments have been performed, and several industrial projects are under way. Therefore it is interesting to review the state-of-the-art of the know-how and experience thus acquired so as to try to determine the outlook for the development of the process. The first part of this article reviews the behavior of CO2 in the presence of hydrocarbons and the leading action mechanisms in the recovery process. The second part examines the leading pilot or industrial applications and the operational problems

  11. [Special artificial respiration procedures and intracranial pressure. Animal experiment studies, development and use of a new pressure measuring technic, clinical aspects].

    Science.gov (United States)

    Schedl, R

    1985-01-01

    We investigated the influence of Forced Diffusion Ventilation (FDV), a special form of High Frequency Ventilation (HFV), on elevated intracranial pressure (ICP) in 5 dogs. Elevation of ICP was standardized by inflation of an epidural balloon. A typical finding with FDV is a reduced intrapleural pressure and therefore one could expect a better cerebrovenous drainage influencing ICP. Nevertheless, we found no changes in mean ICP under conditions of FDV compared with IPPV. Respirator-synchronous fluctuations of ICP, cisternal cerebrospinal fluid pressure and intrapleural pressure were drastically reduced with FDV. This phenomenon has been already reported by other groups as a typical effect of HFV with rates of 100/min. One can speculate, that this immediate impact of HFV on ICP-curves might be of some advantage in patients with critically reduced intracranial compliance requiring long-term artificial ventilation, because peaks and amplitudes of ICP are reduced. Our clinical experience with High Frequency Pulsation (HFP) includes 11 patients with severe brain trauma. In clinical routine this method of HFV is more facile to applicate than FDV, because there is no need of a special endotracheal tube and sufficient CO2-elimination is not strongly dependent on precise position of the tube. But HFP, as FDV, includes all advantages of respiratory systems, that are open against atmosphere (coughing and simultaneous breathing, without drastically increasing airway pressure, suction during respiration, etc.). However, we could find no special advantages or disadvantages in ICP-course during long-term application of HFP (up to 10 days). Because application of HFV is dependent on special technical equipment, we investigated in 6 patients the influence of respiratory frequency, tidal volume and inspiratory flow on ICP-fluctuations using conventional ventilators. ICP was recorded by a new, self constructed pneumatic epidural pressure sensor. Ventilator-related ICP

  12. Computed tomography in multiple trauma patients. Technical aspects, work flow, and dose reduction; Polytrauma-Computertomographie. Technische Grundlagen, Workflow und Dosisreduktion

    Energy Technology Data Exchange (ETDEWEB)

    Fellner, F.A. [AKH Linz - Kepler Universitaetsklinikum/JKU, Zentrales Radiologie Institut, Linz (Austria); Friedrich-Alexander-Universitaet Erlangen-Nuernberg, Erlangen (Germany); Krieger, J.; Floery, D. [AKH Linz - Kepler Universitaetsklinikum/JKU, Zentrales Radiologie Institut, Linz (Austria); Lechner, N. [AKH Linz - Kepler Universitaetsklinikum/JKU, Abteilung fuer Medizintechnik, Linz (Austria)

    2014-09-15

    Patients with severe, life-threatening trauma require a fast and accurate clinical and imaging diagnostic workup during the first phase of trauma management. Early whole-body computed tomography has clearly been proven to be the current standard of care of these patients. A similar imaging quality can be achieved in the multiple trauma setting compared with routine imaging especially using rapid, latest generation computed tomography (CT) scanners. This article encompasses a detailed view on the use of CT in patients with life-threatening trauma. A special focus is placed on radiological procedures in trauma units and on the methods for CT workup in routine cases and in challenging situations. Another focus discusses the potential of dose reduction of CT scans in multiple trauma as well as the examination of children with severe trauma. Various studies have demonstrated that early whole-body CT positively correlates with low morbidity and mortality and is clearly superior to the use of other imaging modalities. Optimal trauma unit management means a close cooperation between trauma surgeons, anesthesiologists and radiologists, whereby the radiologist is responsible for a rapid and accurate radiological workup and the rapid communication of imaging findings. However, even in the trauma setting, aspects of patient radiation doses should be kept in mind. (orig.) [German] Polytraumatisierte Patienten beduerfen im Rahmen der initialen Schockraumversorgung einer schnellen und exakten klinischen und bildgebenden Diagnostik. Fuer ein optimales Schockraummanagement ist heute die essenzielle Bedeutung einer zeitnah durchgefuehrten Ganzkoerper-CT unbestritten. Insbesondere durch schnelle CT-Scanner der letzten Generationen kann im Rahmen der Schockraum-CT eine aehnlich gute Bildqualitaet wie in der Routinediagnostik erzielt werden. Dieser Artikel beleuchtet den Einsatz der CT im Schockraum bei polytraumatisierten Patienten, wobei das Hauptaugenmerk auf Methoden des

  13. ANALISIS FINANSIALPOLA PENGGUNAAN LAHAN MANGROVE

    Directory of Open Access Journals (Sweden)

    Indra Gumay Febryano

    2014-11-01

    The expansion of aquaculture in coastal areas has become a major cause of mangroves deforestation. That has been taking place on a massive scale and impact on the social, economics, and ecology aspects in coastal areas. This study aims to explain the value of mangrove resources through the study of the financial analysis of some mangrove land use patterns. Data were collected through in-depth interviews, participant observation, and document analysis. The results showed that some landuse patterns of mangrove in Pesawaran Regency are intensive shrimp farming, mangrove nursery, and ecotourism that financially feasible to be developed. The high value of landuse patterns for intensive shrimp ponds created a high interest on the bussinesmen to own the mangrove. When intensive shrimp farms have a negative impact to the environment and its surrounding communities, also the constrain of mangrove nursery by market, then ecotourism gives great potential to mangrove protection and its biodiversity along the empowerment of local communities.

  14. ANALISIS PERIKANAN HUHATE DI PERAIRAN LARANTUKA, FLORES

    Directory of Open Access Journals (Sweden)

    Mohamad Adha Akbar

    2016-11-01

    Full Text Available Informasi mengenai beberapa aspek perikanan huhate sangat diperlukan sebagai bahan untuk perencanaan pengelolaan perikanan yang berkelanjutan. Penelitian ini dilakukan di Larantuka, Flores Timur pada tahun 2014 dengan tujuan untuk menganalisis perikanan huhate sebagai salah satu tulang punggung perikanan TCT. Kegiatan penelitian diprioritaskan pada analisis unit alat tangkap, daerah penangkapan, komposisi hasil tangkapan dan estimasi Total Faktor Produktivitas (TFP perikanan huhate. Basis data pengukuran adalah himpunan  data pendaratan dan observasi lapang. Hasil penelitian menunjukan bahwa karakteristik armada terdiri dari kapal yang terbuat dari fibreglass dengan kisaran bobot kapal 6 - 30 GT. Daerah penangkapan di sekitar perairan Laut Sawu dan Laut Flores. Hasil tangkapan utama didominansi oleh cakalang (Katsuwonus pelamis sebanyak 82%, juwana tuna (Thunnus spp. 17% dan tongkol (Auxis spp. 1% serta hasil tangkapan ikutan lemadang (Coryphaena hippurus dan marlin (Makaira spp. < 1%. Hasil analisis tangkapan per unit upaya (CPUE memberikan nilai rata-rata sebesar 1,1 ton/trip (0,4-1,7 ton/trip dengan nilai tertinggi terjadi pada Februari, sedangkan terendah terjadi pada Januari. Hasil penelitian menunjukkan terdapat hubungan yang signifikan antara tren bulanan CPUE dan nilai TFP.

  15. ANALISIS PENGELOLAAN LINGKUNGAN PERMUKIMAN DI KABUPATEN SOPPENG

    Directory of Open Access Journals (Sweden)

    Bakhrani Rauf

    2016-08-01

    Full Text Available Penelitian ini  bertujuan untuk mendeskripsikan pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 penyediaan dan penanganan lahan terbuka hijau (open space; (2 penyediaan dan penanganan drainase; (3  penanganan sampah; (4 penyediaan dan penanganan pembuangan veses (septic tank. Jenis penelitian ini adalah penelitian kuantitatif dengan pendekatan survei.  Sampel wailayah penelitian ini adalah satu RW di ibu kota kabupaten dan satu RW di desa yang dipilih dengan metode purpossive sampling,  yaitu RW yang sudah maju di ibu kota kabupaten dan RW yang tertinggal di desa. Responden sebanyak 50 kepala keluarga yakni masing-masing 25 kepala keuarga di setiap RW, dipilih dengan  systematic random sampling.  Teknik pengumpulan data yang dilakukan adalah melakukan observasi langsung dan dilengkapi dengan wawancara terhadap responden. Analisis yang digunakan adalah analisis deskriptif. Hasil penelitian menunjukkan bahwa pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 ketersediaan dan penanganan lahan terbuka hijau (open space ditemukan belum memadai; (2 ketersediaan drainase (air kotor dan air hujan ditemukan belum memadai; (3 Penanganan sampahbelum memadai; dan (4 penanganan veses dan penyediaan septic tankbelum memadai.

  16. [AN ENTRY FOR A "DICTIONARY OF GENETICS" GENERATION AND ASPECTS OF HEREDITY FROM THE PRESOCRATICS TO GALEN: THE MAIN NOTIONS AND THE TECHNICAL TERMINOLOGY].

    Science.gov (United States)

    Giorgianni, Franco; Provenza, Antonietta

    2015-01-01

    This article aims at dealing with the historical development and the terminology of the notion of generation in ancient Greece, taking as well into consideration several aspects of the notion of heredity, for, at present, research in this field lacks a consistent encyclopedic entry on such subjects. The Presocratic - mainly Empedoclean - notions of 'mixing' and 'separation' lurk behind the Hippocratic treatise De genitura/De natura pueri, in which the process of generation is explained through the 'mixing' mechanism of a female semen and a male one. Semen comes from each part of both parents, so it is sound from the sound parts, and unhealthy from the unhealthy parts. It is considered as the "foam of blood" (Diogenes, A 24 DK), gathering itself into a web of blood vessels that bring it to the genital organs. The mixed semen keeps on fixing itself in the womb thanks to pneuma ('breath'), until the embryo takes human shape. Generation is influenced by both the environment (Airs, Waters, Places) and dietetics (On Regimen, I). Male and female are on different levels in CH, since the former is characterized as hot and strong, and the latter is considered as cold and weak; as a consequence of this, the articulation takes longer in the case of a female embryo. On the other hand, the pangenesis and the preformism theory claim for a strong mutual relationship. Sex determination depends from the 'prevalence' of the male or female semen. The generation of twins of different sex depends from such 'prevalence', as well as from the conformation of the womb and its places (right/male, left/female). Both nature (physis) and use (nomos) have a role in the mechanism of inheritance, as the case of the Macrocephalians in Airs Waters Places shows. On the other hand, Plato's Timaeus exemplifies the theory according to which semen derives from the spinal marrow. The structures of the body - bones, flesh, nerves - aim at protecting marrow itself for the sake of maintaining the continuity

  17. Pengaruh Advance Organizer Berbasis Proyek Terhadap Kemampuan Analisis – Sintesis Siswa

    Directory of Open Access Journals (Sweden)

    Tasiwan -

    2014-01-01

    Full Text Available Penelitian ini dilakukan untuk mengetahui pengaruh model pengatur kemajuan (advance organizer berbasis proyek terhadap kemampuan analisis – sintesis siswa pada konsep Energi. Sebelum pembelajaran, diberikan tugas proyek pada siswa untuk merealisasikan bel listrik sederhana, rangkaian arus seri - paralel, dan tuas. Produk proyek digunakan sebagai advance organizer dalam pembelajaran di kelas. Penguatan kognitif dilakukan melalui diskusi kelompok dan pembuatan peta konsep, ekspositori guru di kelas, dan kegiatan eksperimen laboratorium. Data diambil melalui pretest, post test, observasi partisipatif pembelajaran oleh dua orang observer, penilaian produk, peta konsep dan laporan kegiatan eksperimen. Teknik analisis data meliputi uji prasyarat data dan uji hipotesis Hasil penelitian menunjukkan bahwa siswa mengalami peningkatan kemampuan analisis – sintesis dalam aspek menguraikan, mengkategorikan, mengidentifikasi, merumuskan pernyataan, merekonstruksi, menentukan konsep, dan menganalisis konsep dengan rata – rata peningkatan delta skor sebesar 54,46 %, uji t sebesar 6,4, dan skala gain sebesar 0,3. This study was conducted to determine the effect of project-based advance organizer model on student’s analysis - synthesis ability of the energy concept. Students were given an assignment to realize the project on simple electric bell, the series – parallel circuit, and lever, before learning. The products of project were used as an advanced organizer in the learning activity. Cognitive strengthening was done through group discussions and concept mapping, expository learning in the classroom, and laboratory experiments activities. The data were taken through a pretest, post-test, participant observation study by two observers, product assessment, concept maps and report of experiment activities. Results showed that the students’ analysis - synthesis ability increased in the aspect of describing, categorizing, identifying, statement

  18. IDENTIFIKASI MISKONSEPSI SISWA SMP PADA KONSEP FOTOSINTESIS MELALUI ANALISIS GAMBAR

    Directory of Open Access Journals (Sweden)

    Devi Ariandini

    2014-01-01

    Full Text Available Tujuan dari penelitian ini adalah untuk mengidentifikasi miskonsepsi siswa dengan analisis menggambar. Tiga puluh empat siswa di kelas 8 di sekolah menengah pertama digunakan sebagai subyek dalam penelitian ini. Teknik sampel menggunakan teknik purposive sampling. Data yang diperlukan untuk penelitian ini dikumpulkan melalui kuesioner, menggambar analisis rubrik, dan wawancara. Identifikasi Kesalahpahaman ditentukan dengan menggambar siswa berdasarkan menggambar kriteria klasifikasi oleh Kose (2008. Siswa diperintahkan untuk menarik tentang konsep fotosintesis setelah proses pembelajaran. Gambar siswa dianalisis dengan rubrik dan setelah itu mereka diwawancarai. Hasil penelitian menunjukkan tidak semua tingkat kriteria menggambar dari tingkat 1 sampai 5 diidentifikasi. Dari hasil analisa, gambar paling banyak ditemukan adalah pada tingkat 4. Gambar pada tingkat 4 dikategorikan sebagai gambar lengkap konsep fotosintesis dan tidak ada kesalahpahaman ditemukan. Berdasarkan gambar mereka, ada siswa 2,9% diidentifikasi yang diselenggarakan kesalahpahaman. Ada perbedaan jumlah siswa yang diadakan kesalahpahaman antara gambar hasil analisis dan hasil wawancara. Dari hasil wawancara, ada siswa 35,2% dimiliki kesalahpahaman, lebih dari menggambar hasil analisis. Ini berarti bahwa identifikasi kesalahpahaman melalui analisis gambar tidak efektif. Kesalahpahaman siswa yang paling sering terjadi pada konsep fotosintesis adalah tempat berlangsungnya fotosintesis. Faktor yang membuat kesalahpahaman siswa yaitu karena siswa itu sendiri dan lingkungannya. Kata Kunci: fotosintesis, kesalahpahaman, konsep, menggambar analisis

  19. Analisis Tingkat Kepentingan Dan Kinerja Layanan Automated Teller Machine (Atm) Bank Mandiri

    OpenAIRE

    Setiawati, Lenny; Sugiharto, Toto

    2008-01-01

    Penelitian ini ditujukan untuk menganalisis tingkat kepentingan dan kinerja layananATM Bank Mandiri. Analisis Servqual yang terdiri atas dimensi tangible, realibility,responsiveness, assurance,dan empathy digunakan untuk menganalisis kinerjalayanan ATM. Sementara itu, Customer Satisfaction Index dan ImportancePerformance Analysis yang terdiri atas analisis kuadran dan analisis kesenjangandigunakan untuk menginvestigasi kepuasan pelanggan dan untuk mengidentifikasikandimensi layanan yang kiner...

  20. O Rugby em Cadeira de Rodas: aspectos técnicos e táticos e diretrizes para seu desenvolvimento The Wheelchair Rugby: technical and tactical aspects and a guideline for development

    Directory of Open Access Journals (Sweden)

    Mateus Betanho Campana

    2011-12-01

    Full Text Available O objetivo desse relato de experiência foi descrever aspectos técnicos e táticos do Rugby em Cadeira de Rodas e oferecer indicações de como trabalhá-los para um melhor rendimento do time. Utilizando o método de pesquisa observacional, coletamos informações de times nacionais e internacionais no período de setembro/2008 a dezembro/2009. A observação incluiu treinamentos e competições nacionais e internacionais. Nos resultados apresentamos três elementos técnicos: passe, recepção e domínio de bola. Ainda, jogadas de defesa e ataque, usadas nos âmbitos nacional e internacional são descritas. Concluímos que há um domínio de técnicas e táticas na equipe nacional, mas que a experiência de jogo, a falta de comunicação em quadra e o desconhecimento das regras são elementos que prejudicam o rendimento do time. Esperamos que este estudo auxilie pesquisadores e técnicos a dar continuidade à pesquisa e às ações em quadra, contribuindo para o desenvolvimento da modalidade no Brasil.The aim of this case report was to describe tactical and technical aspects of Wheelchair Rugby and shows directions of how work them to achieve the better results for the team. The observational research methodology was used. Data collection was made from national and international teams between September/2008 to December/2009. The observations included training sessions and competition of nationals and international teams. In results we presented four technical elements: pass, reception, dislocation at the court and ball control. National and international defensives and offensives plays are also described. We conclude that the national teams have domain about technical and tactical skills however, the lack of game experience, lack of communication inside the court, and lack of knowledge about the rules are the weaker points that compromise team performance. We hope that this work helps researchers and coaches to continue the study and the

  1. ANALISIS VARIABEL KEUANGAN YANG MEMPENGARUHI KEBIJAKAN DEVIDEN

    Directory of Open Access Journals (Sweden)

    Sumiadji -

    2012-03-01

    Full Text Available Penelitian ini dilakukan untuk menguji pengaruh variabel keuangan yang terdiri dari: rasio pro-fitabilitas (return on assets, likuiditas (cash ratio, rasio hutang (debt to equity ratio, market value (earnings per share, dan perputaran total aset (total assets turnover terhadap kebijakan dividen yang diproksikan dengan dividend payout ratio (DPR pada perusahaan manufaktur yang terdaftar di Bursa Efek Indonesia tahun 2004-2008. Prosedur pemilihan sampel penelitian menggunakan purposive sampling sehingga menghasilkan 8 perusahaan yang memenuhi kriteria sampel. Data sekunder dikumpulkan dengan teknik dokumentasi bersumber dari Indonesian Capital Market Directory (ICMD, laporan keuangan, dan hasil Rapat Umum Pemegang Saham (RUPS. Teknik analisis yang digunakan dalam penelitian ini adalah analisis regresi linear berganda. Hasil penelitian ini adalah secara simultan variabel ROA, CR, DER, EPS dan TATO berpengaruh terhadap DPR. Secara parsial variabel yang mempengaruhi DPR adalah CR, EPS dan TATO. Varabel lainnya, yaitu ROA dan DER ditemukan tidak berpengaruh terhadap DPR. This research was conducted to examine the influence of the financial variables which consists of: return on assets (ROA, cash ratio (CR, debt to equity ratio (DER, earnings per share (EPS, and total asset turnover (TATO to the dividend policy that indicated by the dividend payout ratio (DPR of listed manufacturing company in Indonesia Stock Exchange  2004 to 2008. The sample selection procedure used was a purposive sampling so that it produced eight companies that met the sample criteria. Se-condary data was collected by the documentation technique were obtained from the Indonesian Capital Market Directory (ICMD, financial statements, and the results of the Annual General Meeting of Shareholders. The analysis technique used was multiple linear regression analysis. The research found that five variables of kind of ROA, CR, DER, EPS dan TATO simultaneously influence to dividend

  2. Technical and commercial aspects of MHTGR development

    International Nuclear Information System (INIS)

    Northup, T.E.; Simon, W.A.; Wistrom, J.D.

    1992-01-01

    The Modular High Temperature Gas-Cooled Reactor (MHTGR) is under development by industry and the U.S. Department of Energy (DOE). Passive safety and design simplicity make the MHTGR an attractive option for future nuclear power generation, but deployment faces many challenges. Economic competitiveness, public acceptance, licensing approval and first-of-a-kind (FOAK) development funding represent some of the prerequisites to commercialization. Successful commercialization hinges on a prototype and a subsequent Lead Plant Project. (author)

  3. Laparoscopic Heller Myotomy for Achalasia Technical Aspects.

    Science.gov (United States)

    Schlottmann, Francisco; Allaix, Marco E; Patti, Marco G

    2018-04-01

    Esophageal achalasia is a primary esophageal motility disorder defined by the lack of esophageal peristalsis, and by a lower esophageal sphincter that fails to relax in response to swallowing. Patients' symptoms include dysphagia, regurgitation, aspiration, heartburn, and chest pain. Achalasia is a chronic condition without cure, and treatment options are aimed at providing symptomatic relief, improving esophageal emptying, and preventing the development of megaesophagus. Presently, a laparoscopic Heller myotomy with a partial fundoplication is considered the best treatment modality. A properly executed operation is key for the success of a laparoscopic Heller myotomy.

  4. Technical aspects of trans reduction in margarines

    Directory of Open Access Journals (Sweden)

    Van Duijn Gerrit

    2000-01-01

    Full Text Available The opinion of nutritional science on the effect of trans fatty acids on blood cholesterol has drastically changed during the last decade. As a reaction to these new findings, the European margarine industry decided in the mid nineties to eliminate trans containing components from their margarine fat phase compositions. This excluded practically the use of partially hydrogenated oils and fats. Trans-free margarines have been introduced with optimised fat crystal structures stabilising a maximum of water in oil emulsion with a minimum of solid fat phase. These fat crystal structures are formed by fat phase components obtained from interesterification and/or fractionation of non-hydrogenated and/or fully hydrogenated feedstocks.

  5. Exhaled Breath Condensate: Technical and Diagnostic Aspects.

    Science.gov (United States)

    Konstantinidi, Efstathia M; Lappas, Andreas S; Tzortzi, Anna S; Behrakis, Panagiotis K

    2015-01-01

    The aim of this study was to evaluate the 30-year progress of research on exhaled breath condensate in a disease-based approach. We searched PubMed/Medline, ScienceDirect, and Google Scholar using the following keywords: exhaled breath condensate (EBC), biomarkers, pH, asthma, gastroesophageal reflux (GERD), smoking, COPD, lung cancer, NSCLC, mechanical ventilation, cystic fibrosis, pulmonary arterial hypertension (PAH), idiopathic pulmonary fibrosis, interstitial lung diseases, obstructive sleep apnea (OSA), and drugs. We found 12600 related articles in total in Google Scholar, 1807 in ScienceDirect, and 1081 in PubMed/Medline, published from 1980 to October 2014. 228 original investigation and review articles were eligible. There is rapidly increasing number of innovative articles, covering all the areas of modern respiratory medicine and expanding EBC potential clinical applications to other fields of internal medicine. However, the majority of published papers represent the results of small-scale studies and thus current knowledge must be further evaluated in large cohorts. In regard to the potential clinical use of EBC-analysis, several limitations must be pointed out, including poor reproducibility of biomarkers and absence of large surveys towards determination of reference-normal values. In conclusion, contemporary EBC-analysis is an intriguing achievement, but still in early stage when it comes to its application in clinical practice.

  6. Open data science technical and cultural aspects

    CERN Multimedia

    CERN. Geneva

    2005-01-01

    Research in STM fields routinely generates and requires large amounts of data in electronic form. The growth of scientific research using infrastructures such as the Grid, UK's eScience programme and cyber infrastructure requires the re-use, repurposing and redissemination of this information. Fields like bioinformatics, astronomy, physics, and earth/environmental sciences routinely use such data as primary research input. Much of this is now carried out by machines which harvest data from multiple sources in dynamic and iterative ways, validate, filter compute and republish it. The current publication process and legal infrastructure is now a serious hindrance to this. Most STM data are never published and the re-usability of those that are is often unclear as authors and publishers give no explicit permission. However almost all authors intend that published data (non-copyrightable “facts”) are for the re-use of and redissemination to the STM community and the world in general. Many publishers agree wit...

  7. Autonomous driving technical, legal and social aspects

    CERN Document Server

    Gerdes, J; Lenz, Barbara; Winner, Hermann

    2016-01-01

    This book takes a look at fully automated, autonomous vehicles and discusses many open questions: How can autonomous vehicles be integrated into the current transportation system with diverse users and human drivers? Where do automated vehicles fall under current legal frameworks? What risks are associated with automation and how will society respond to these risks? How will the marketplace react to automated vehicles and what changes may be necessary for companies? Experts from Germany and the United States define key societal, engineering, and mobility issues related to the automation of vehicles. They discuss the decisions programmers of automated vehicles must make to enable vehicles to perceive their environment, interact with other road users, and choose actions that may have ethical consequences. The authors further identify expectations and concerns that will form the basis for individual and societal acceptance of autonomous driving. While the safety benefits of such vehicles are tremendous, the auth...

  8. Technical Aspects of Cyber Kill Chain

    OpenAIRE

    Yadav, Tarun; Mallari, Rao Arvind

    2016-01-01

    Recent trends in targeted cyber-attacks has increased the interest of research in the field of cyber security. Such attacks have massive disruptive effects on rganizations, enterprises and governments. Cyber kill chain is a model to describe cyber-attacks so as to develop incident response and analysis capabilities. Cyber kill chain in simple terms is an attack chain, the path that an intruder takes to penetrate information systems over time to execute an attack on the target. This paper broa...

  9. Technical aspects of flue gas irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, M. R.; Galloway, R. A. [IBA Industrial, Inc., Edgewood, NY (United States); Stichelbaut, F.; Abs, M. [IBA Industrial, Inc., Louvain-la-Neuve (Belgium)

    2011-07-01

    Removal of SO{sub 2} and NO{sub x} from flue gases in fossil-fueled power plants by irradiation with accelerated electrons was first investigated in Japan more than 30 years ago. This process has since been extensively evaluated in several pilot facilities in Japan, the USA, Germany, Poland, Bulgaria and China. Recently, it has advanced to the demonstration plant stage in Poland, Japan and China. Except for the initial research facility in Japan, which had a 5.5 MeV microwave linear accelerator, these facilities have used relatively low-energy dc accelerators rated from 0.3 MeV to 0.8 MeV. An attractive feature of such accelerators is their high electrical efficiency, which can exceed 90%. However, the electron beam power dissipated in the two titanium beam windows, the first on the accelerator and the second on the flue gas duct, and in the air space between the windows must also be taken into account. These beam power losses have been calculated as 54% at 0.50 MeV and 28% at 0.75 MeV, but they decrease further to 17% at 1.0 MeV, 9.3% at 1.5 MeV, 6.7% at 2.0 MeV, 5.2% at 2.5 MeV and 4.6% at 3.0 MeV. The use of accelerators providing electron energies higher than 0.75 MeV could facilitate the generation and delivery of the high beam current and beam power requirements for large electric power plants, which are about 1% to 2% of the electrical power output of the plant. Most of the pilot and demonstration facilities have used ammonia gas to neutralize the acid vapors produced during the irradiation process. The resulting by-products are ammonium sulfate and ammonium nitrate, which have value as agricultural fertilizers. On the other hand, two pilot facilities, one in the USA and the other in Japan, have shown that slaked lime (calcium hydroxide) is a possible alternative to ammonia. The resulting by-products in this case are calcium sulfate and calcium nitrate, which can be used as soil amendments or to make gypsum board (drywall) for interior construction in homes and industrial buildings. In contrast to ammonia, slaked lime gives somewhat different results from the irradiation process. It is more effective in removing nitrogen oxides, whereas ammonia is more effective in removing sulfur dioxide. For power plants which are already equipped with wet limestone scrubbers for sulfur dioxide, the addition of an electron beam facility with lime neutralization could be a more attractive way to remove the residual nitrogen oxides than selective catalytic reduction. The calcium nitrate so produced would be a safer by-product than ammonium nitrate with a low concentration of ammonium sulfate, which could be mixed with fuel oil to make an explosive material. (author)

  10. Technical aspects of flue gas irradiation

    International Nuclear Information System (INIS)

    Cleland, M.R.; Galloway, R.A.; Stichelbaut, F.; Abs, M.

    2011-01-01

    Removal of SO 2 and NO x from flue gases in fossil-fueled power plants by irradiation with accelerated electrons was first investigated in Japan more than 30 years ago. This process has since been extensively evaluated in several pilot facilities in Japan, the USA, Germany, Poland, Bulgaria and China. Recently, it has advanced to the demonstration plant stage in Poland, Japan and China. Except for the initial research facility in Japan, which had a 5.5 MeV microwave linear accelerator, these facilities have used relatively low-energy dc accelerators rated from 0.3 MeV to 0.8 MeV. An attractive feature of such accelerators is their high electrical efficiency, which can exceed 90%. However, the electron beam power dissipated in the two titanium beam windows, the first on the accelerator and the second on the flue gas duct, and in the air space between the windows must also be taken into account. These beam power losses have been calculated as 54% at 0.50 MeV and 28% at 0.75 MeV, but they decrease further to 17% at 1.0 MeV, 9.3% at 1.5 MeV, 6.7% at 2.0 MeV, 5.2% at 2.5 MeV and 4.6% at 3.0 MeV. The use of accelerators providing electron energies higher than 0.75 MeV could facilitate the generation and delivery of the high beam current and beam power requirements for large electric power plants, which are about 1% to 2% of the electrical power output of the plant. Most of the pilot and demonstration facilities have used ammonia gas to neutralize the acid vapors produced during the irradiation process. The resulting by-products are ammonium sulfate and ammonium nitrate, which have value as agricultural fertilizers. On the other hand, two pilot facilities, one in the USA and the other in Japan, have shown that slaked lime (calcium hydroxide) is a possible alternative to ammonia. The resulting by-products in this case are calcium sulfate and calcium nitrate, which can be used as soil amendments or to make gypsum board (drywall) for interior construction in homes and industrial buildings. In contrast to ammonia, slaked lime gives somewhat different results from the irradiation process. It is more effective in removing nitrogen oxides, whereas ammonia is more effective in removing sulfur dioxide. For power plants which are already equipped with wet limestone scrubbers for sulfur dioxide, the addition of an electron beam facility with lime neutralization could be a more attractive way to remove the residual nitrogen oxides than selective catalytic reduction. The calcium nitrate so produced would be a safer by-product than ammonium nitrate with a low concentration of ammonium sulfate, which could be mixed with fuel oil to make an explosive material. (author)

  11. Exhaled Breath Condensate: Technical and Diagnostic Aspects

    Directory of Open Access Journals (Sweden)

    Efstathia M. Konstantinidi

    2015-01-01

    Full Text Available Purpose. The aim of this study was to evaluate the 30-year progress of research on exhaled breath condensate in a disease-based approach. Methods. We searched PubMed/Medline, ScienceDirect, and Google Scholar using the following keywords: exhaled breath condensate (EBC, biomarkers, pH, asthma, gastroesophageal reflux (GERD, smoking, COPD, lung cancer, NSCLC, mechanical ventilation, cystic fibrosis, pulmonary arterial hypertension (PAH, idiopathic pulmonary fibrosis, interstitial lung diseases, obstructive sleep apnea (OSA, and drugs. Results. We found 12600 related articles in total in Google Scholar, 1807 in ScienceDirect, and 1081 in PubMed/Medline, published from 1980 to October 2014. 228 original investigation and review articles were eligible. Conclusions. There is rapidly increasing number of innovative articles, covering all the areas of modern respiratory medicine and expanding EBC potential clinical applications to other fields of internal medicine. However, the majority of published papers represent the results of small-scale studies and thus current knowledge must be further evaluated in large cohorts. In regard to the potential clinical use of EBC-analysis, several limitations must be pointed out, including poor reproducibility of biomarkers and absence of large surveys towards determination of reference-normal values. In conclusion, contemporary EBC-analysis is an intriguing achievement, but still in early stage when it comes to its application in clinical practice.

  12. Gen IV. Technical and economical aspects

    International Nuclear Information System (INIS)

    Kaluzny, Y.; Legee, F.

    2010-01-01

    In this presentation author deals with development of nuclear reactor type of Generation IV. He concluded that: - Nuclear energy is competitive with regards to the other generation sources; Its competitiveness also increases with CO 2 cost. Considering the nuclear cost breakdown of LWR reactors, it turns out that the uranium is currently not in the range of a threshold for FBR deployment; - The global balance of uranium supply and demand and also innovation required to fulfil GEN IV objectives would probably imply the emergence of fast reactor competitiveness after the turn of the mid-century; - We shall need fast reactors in the coming decade.

  13. Food irradiation: Some regulatory and technical aspects

    International Nuclear Information System (INIS)

    1985-10-01

    An Advisory Group by IAEA and FAO on Regulatory and Technological Requirements for Authorization of the Food Irradiation Process was held at IAEA Headquarters in Vienna from 5 to 9 November 1984. The task of the Advisory Group was to advise on the scientific and technological considerations affecting the implementation of the food irradiation process, with particular reference to the facilitation of international trade in irradiated foods and to develop guidance on how the various provisions of the Codex General Standard on Irradiated Foods could be incorporated into national legislation in order to facilitate international trade and avoid the occurence of trade barriers. Separate abstracts were prepared for the various presentations at this meeting

  14. ANALISIS JENIS, JUMLAH DAN MUTU SARAPAN PAGI SISWA SEKOLAH DASAR

    Directory of Open Access Journals (Sweden)

    Sopiyandi Sopiyandi

    2016-01-01

    Full Text Available Abstract: Type Analysis, Number and Quality Breakfast of Children on Elementary School. The research objective is to analyze the full breakfast at the elementary school students in District Rasau Jaya covering aspects of the type, quantity and quality of the breakfast. This research is an analytic with Cross sectional study design. Subjects were students at SDN 1 Rasau Jaya aged 8-12 years, a large sample of 215 respondents. The results showed that as many as 98.6% of students breakfasts with ten types of food most consumed by children during breakfast ie eggs, white rice, fried rice, yellow rice, tempeh, bulb meatballs, dumplings, bread, sausages and porridge. While the five types of beverage most consumed by children during breakfast was tea, milk, juice, water, and syrup. 54% of the number of good energy, 51% protein and 68.4% fat in both categories. 61.9% carbohydrate intake is not good. The nutritional quality of food is quite good kid. Abstrak : Analisis Jenis, Jumlah Dan Mutu Sarapan Pagi Siswa Sekolah Dasar. Tujuan penelitian yaitu untuk menganalisis sarapan pagi pada siswa Sekolah Dasar di Kecamatan Rasau Jaya meliputi aspek jenis, jumlah dan mutu sarapan. Penelitian ini bersifat analitik dengan desain penelitian Cross sectional. Subjek penelitian adalah siswa SDN 1 Rasau Jaya usia 8-12 tahun, besar sampel penelitian sebanyak 215 responden. Hasil penelitian menunjukkan bahwa sebanyak 98,6 % siswa sarapan dengan sepuluh jenis makanan yang paling banyak dikonsumsi oleh anak selama sarapan yaitu telur ayam, nasi putih, nasi goreng, nasi kuning, tempe, pentol bakso, siomay, roti, sosis, dan bubur. Sedangkan lima jenis minuman yang paling banyak dikonsumsi oleh anak selama sarapan adalah teh, susu, air jeruk, air putih, dan sirup. Sebanyak 54% jumlah energi baik, protein 51 % dan lemak 68,4% pada kategori baik. 61,9% asupan karbohidrat tidak baik. Mutu gizi pangan anak tergolong baik.

  15. ANALISIS VARIABILITAS CURAH HUJAN DAN SUHU DI BALI

    Directory of Open Access Journals (Sweden)

    Ogi Setiawan

    2017-01-01

    Full Text Available Indonesia sebagai negara kepulauan yang terdiri dari pulau-pulau besar dan kecil menjadi sangat rentan terhadap dampak perubahan iklim. Salah satu pulau yang juga rentan terhadap perubahan iklim adalah pulau Bali. Dampak potensial adanya perubahan iklim adalah perubahan pola hujan, peningkatan suhuudaradankenaikanpermukaanlaut. Sektoryangakanmenerimadampakperubahaniklimdengan serius adalah sektor kehutanan dan pertanian. Untuk mendukung upaya mitigasi dan adaptasi maka diperlukan informasi perubahan iklim yang terjadi. Penelitian ini bertujuan untuk mengetahui variabilitas iklim di Bali. Metode yang digunakan adalah analisis kecenderungan curah hujan, analisis perubahan suhu udara, analisis perubahan tipe iklim dan analisis pergeseran bulan basah, lembab dan kering. Data hujan yang digunakan adalah data hujan dari GPCC (1961-1998 dan BMKG Bali (19992008, sedangkan data suhu berasal dari BMKG Bali (2004-2008. Hasil analisis menunjukkan bahwa di pulau Bali secara umum sudah mengalami perubahan iklim. Tipe iklim berdasarkan Schmidt-Ferguson mengalami perubahan dari relatif basah menjadi agak kering. Suhu udara rata-rata bulanan serta curah hujan bulanan dan tahunan memiliki kecenderungan yang semakin meningkat. Bulan basah dan bulan kering telah mengalami pergeseran dan perubahan jumlahnya. Dampak perubahan iklim terhadap ekosistem hutan di Bali belum diketahui dengan pasti, namun terdapat beberapa implikasi perubahan iklim terhadap sektor kehutanan diantaranya kebakaran hutan dan perubahan jadwal penanaman.

  16. Analisis Peluang dan Tantangan Pengembangan Agroindustri Kelapa

    Directory of Open Access Journals (Sweden)

    Suci Wulandari

    2017-03-01

    Full Text Available The organization as a pool of resources, capabilities and competencies needed togenerate physical products or intangible services which create the competitive advantage. It isdeveloped by effective management of technical aspects and by learning aspects of theorganization, and also the influence of an effective networking. How these two factors work toestablish value of the organization then effect the degree of competitiveness, is influenced byhow much the assets owned by an organization. This value is categorized into tangible andintangible assets. Development of coconut-based products shows a meaningful opportunity inthis regard. On the other hand, changes in the global environment have brought changes in thebehavior of consumers and competition conditions. Review of the role, coconut commoditiesprovides a great role to the economy nationally. Indonesia is a country with the largest area ofcoconut production in the world, followed by The Fillippines and India. Exports of coconutproducts from Indonesia tended to increase. The size of the role and potential of coconut wasnot followed by the performance of the coconut industry. This is shown by the problemsassociated with value-added products, linkages, transfer the risks and benefits, the contributionfor the development of rural agro-industry, export value of products, industrial competitivenessin medium and small agro-industry in the global market and information flow. Optimizing thevalue of intangible assets in the system of agro-industry can be improved through theimplementation of Knowledge Management occurred through developing external structure,internal structure and individual competency. Application of Knowledge Management refers tothe model of two dimensions, namely the process of knowledge creation and innovation, andelements that enable or influence the activities of knowledge creation. This model isimplemented by using Knowledge Management Roadmap which consists of 10 steps in 4

  17. ANALISIS SPASIAL KEJADIAN DEMAM BERDARAH DENGUE BERDASARKAN KEPADATAN PENDUDUK

    Directory of Open Access Journals (Sweden)

    Agcrista Permata Kusuma

    2016-01-01

    Full Text Available Abstrak Puskesmas Kedungmundu merupakan wilayah endemis DBD dengan kasus yang tinggi. Diperlukan upaya dalam menentukan kebijakan strategi pengendalian vektor secara efektif dan efisien. Analisis spasial dalam SIG dapat digunakan untuk mengetahui pola penyebaran dan daerah potensi penularan DBD. Jenis penelitian ini adalah penelitian deskriptif analitik menggunakan pendekatan cross sectional. Teknik pengambilan sampel menggunakan sampel wilayah memperhatikan proporsi sampel dengan jumlah sampel 146 responden. Pengambilan titik koordinat menggunakan GPS. Analisis data menggunakan analisis univariat dan analisis spasial. Hasil perhitungan statistik spasial ANN diperoleh nilai Z-score = -11,054 terdapat pola spasial kasus DBD di wilayah kerja Puskesmas Kedungmundu. Nilai ANN = 0,52 < 1, artinya pola penyebaran kejadian DBD yang terjadi adalah berkerumun. Kesimpulan dalam penelitian ini sebaran kasus DBD memiliki keterkaitan secara spasial dengan kepadatan penduduk. Abstract Kedungmundu PHC is an endemich region with a high case. Be required to determine policy of vector control strategies effectively and efficiently. Spatial analsys in GIS can be used to determine the pattern of distribution and areas of DHF potential transmission. The type this research was analysis descriptive with cross sectional approach. The sampling technique used a sample area of attention to the proportion of the sample with 146 respondents of total sample. Capturing the coordinates used GPS. Data analisys used univariat and spatial analisys. Result of ANN obtained a Z-score= -11,054, there was a spatial pattern of dengue cases in Kedungmundu PHC. ANN value = 0,52 < 1, it meant that the pattern of DHF distribution was clustered. The conclution of this research was DHF distribution cases has spatial correlation with density population.

  18. Coastal dynamics physical and mathematical modelling, territorial analysis, G.I.S. instrumentation. The state of the arts; La dinamica costiera modellistica fisico-matematica, analisi del territorio, il supporto G.I.S. e la strumentazione in uso

    Energy Technology Data Exchange (ETDEWEB)

    De Bonis, P; Fattorusso, G; Onori, F; Pagano, A; Pasanisi, F; Peloso, A; Regina, P; Tebano, C; Zarlenga, F [ENEA, Div. Caratterizzazione dell' Ambiente, Centro Ricerche Casaccia, S. Maria di Galeria, Rome (Italy)

    2001-07-01

    The aim of the present work is to offer, in a single volume, the basic notions relative to different aspects, both theoretical and practical, of the study of coastal dynamical processes. It has been dealt with geological issues, physical and mathematical modelling, effects related to human activities, Geographical Information Systems as well as both laboratory and fields instrumentations. Reading this technical paper it has to keep in mind two aspects which have been authors guidelines. First of all, the research theme's have been studied on their theoretical aspects, focusing on the most recent developments. Then have been selected some up to date experiences and discuss their application. The general framework of this publication, which necessarily leave out some particular issues, for which the readers are to be referred to the references, gives a synthetic and homogenous picture of the state of the arts in coastal modelling. [Italian] Lo scopo della presente pubblicazione e' quello di offrire, in un unico volume, le nozioni di base riguardo ai diversi argomenti sia teorici sia pratici relativi all'analisi delle dinamiche costiere. Sono stati affrontati i temi relativi alla geologia, alla modellistica fisica e matematica, ai fattori di pressione antropica, all'utilizzo di Sistemi Informativi Geografici e alla strumentazione sia di campo sia di laboratorio. Nello sviluppo del presente Rapporto Tecnico si possono individuare per ciascuna delle aree di interesse due aspetti fondamentali. Dapprima i temi di ricerca sono stati studiati da un punto di vista teorico generale, con attenzione agli sviluppi piu' attuali e successivamente sono state presentate alcune recenti esperienze ed applicazioni di tali conoscenze. L'impostazione generale del presente lavoro, che sicuramente porta a trascurare alcuni aspetti particolari, per i quali si rimanda alla bibliografia, fornisce in ogni caso un quadro sintetico ed organico dello stato dell'arte dello studio della

  19. Coastal dynamics physical and mathematical modelling, territorial analysis, G.I.S. instrumentation. The state of the arts; La dinamica costiera modellistica fisico-matematica, analisi del territorio, il supporto G.I.S. e la strumentazione in uso

    Energy Technology Data Exchange (ETDEWEB)

    De Bonis, P.; Fattorusso, G.; Onori, F.; Pagano, A.; Pasanisi, F.; Peloso, A.; Regina, P.; Tebano, C.; Zarlenga, F. [ENEA, Div. Caratterizzazione dell' Ambiente, Centro Ricerche Casaccia, S. Maria di Galeria, Rome (Italy)

    2001-07-01

    The aim of the present work is to offer, in a single volume, the basic notions relative to different aspects, both theoretical and practical, of the study of coastal dynamical processes. It has been dealt with geological issues, physical and mathematical modelling, effects related to human activities, Geographical Information Systems as well as both laboratory and fields instrumentations. Reading this technical paper it has to keep in mind two aspects which have been authors guidelines. First of all, the research theme's have been studied on their theoretical aspects, focusing on the most recent developments. Then have been selected some up to date experiences and discuss their application. The general framework of this publication, which necessarily leave out some particular issues, for which the readers are to be referred to the references, gives a synthetic and homogenous picture of the state of the arts in coastal modelling. [Italian] Lo scopo della presente pubblicazione e' quello di offrire, in un unico volume, le nozioni di base riguardo ai diversi argomenti sia teorici sia pratici relativi all'analisi delle dinamiche costiere. Sono stati affrontati i temi relativi alla geologia, alla modellistica fisica e matematica, ai fattori di pressione antropica, all'utilizzo di Sistemi Informativi Geografici e alla strumentazione sia di campo sia di laboratorio. Nello sviluppo del presente Rapporto Tecnico si possono individuare per ciascuna delle aree di interesse due aspetti fondamentali. Dapprima i temi di ricerca sono stati studiati da un punto di vista teorico generale, con attenzione agli sviluppi piu' attuali e successivamente sono state presentate alcune recenti esperienze ed applicazioni di tali conoscenze. L'impostazione generale del presente lavoro, che sicuramente porta a trascurare alcuni aspetti particolari, per i quali si rimanda alla bibliografia, fornisce in ogni caso un quadro sintetico ed organico dello stato dell

  20. ANALISIS GEN HAEMAGGLUTININ PADA VIRUS CAMPAK LIAR

    Directory of Open Access Journals (Sweden)

    Subangkit Subangkit

    2015-05-01

    Full Text Available AbstrakPenyakit Campak disebabkan oleh virus campak yang termasuk genus Morbilivirus dan Family Paramyxoviridae. Penyakit campak masih menjadi masalah kesehatan karena masih ditemukan Kejadian Luar Biasa (KLB di Indonesia. Salah satu penyebab terjadinya KLB tersebut diduga sebagaiakibat perbedaan antigenesitas antara strain vaksin yang digunakan dengan strain virus campak liar yang beredar di Indonesia. Penelitian ini bertujuan mendapatkan gambaran tentang karakteristik genetik gen Haemagglutinin virus campak liar yang ada di Indonesia. Spesimen yang digunakan sebanyak 27 isolat virus penyebab KLB dari 17 propinsi selama periode tahun 2003-2010. Isolat virus dilakukan pemeriksaan secara RT-PCR dan sekuensing dengan metode Sanger. Hasil sekuensing dianalisis dengan menggunakan perangkat lunak Bioedit 7.0 dan MEGA 4.0. Hasil penelitian didapatkan perbedaan 10 asam amino antara virus campak strain vaksin CAM-70 dan virus campak liar pada posisi D416N; K424T; V451M; N455T; V466I; I473T; F476L; Y481S atau Y481N; H495N; G505D. Kesimpulan penelitian ini adalah terdapat perbedaan karakteristik genetik antara virus campak liar di Indonesia berbeda dengan strain virus vaksin CAM-70.Kata kunci : Campak, Analisis Molekuler, Hemagglutinin, CD46AbstractMeasles is caused by virus belonging to the genus Morbilivirus and Family Paramyxoviridae. Measles is still a public health problem because outbreak of measles still found in Indonesia. Outbreak is suspected as a result of differences in antigenicity between vaccine strains used with wild-type measles virus strains circulating in Indonesia. This study aims to get genetic characteristics of wild-type measles virus haemagglutinin gene in Indonesia. The specimens were used 27 viral isolates from 17 provinces period 2003-2010. Viral isolates examined by RT-PCR and sequencing with Sanger method. Sequencing analysis were conducted using Bioedit 7.0 and MEGA 4.0 software. The results showed 10 amino acid differences

  1. Analisis Kelayakan Finansial Usaha Budidaya Bambu

    Directory of Open Access Journals (Sweden)

    Husnul Khotimah

    2015-12-01

    Full Text Available Budidaya bambu diperlukan untuk menambah populasi bambu yang cenderung berkurang yang disebabkan oleh beralihnya fungsi lahan yang digunakan untuk pemukiman atau diganti dengan komoditi tanaman lain yang dianggap lebih menguntungkan. Sementara itu kebutuhan bahan baku bambu terus meningkat sejalan dengan pertumbuhan penduduk dan perkembangan kemajuan ilmu pengetahuan. Budidaya bambu bermanfaat selain untuk menjaga ketersediaan suplai juga untuk meningkatkan kualitas bambu untuk memenuhi permintaan pasar. Tulisan ini mengkaji analisis finansial dari penanaman bambu. Kajian finansial dibutuhkan untuk menunjukkan bahwa upaya penanaman atau budidaya bambu ini layak atau tidak secara finansial untuk dilakukan. Data yang digunakan adalah data hasil penelitian di perusahaan perkebunan bambu PT XYZ di Lampung. Hasil penelitian menunjukkan bahwa nilai NPV (Rp 36.644.364,08 lebih besar dari nol, Net B/C (2,56 lebih besar dari satu, IRR (11 % lebih besar dari suku bunga 6 %, serta payback period pada tahun ke-9 umur proyek 15 tahun. Berdasarkan kriteria indikator kelayakan finansial dapat disimpulkan bahwa usaha budidaya bambu layak secara finansial untuk diusahakan. Katakunci: Hasil Hutan Bukan Kayu (HHBK, budidaya bambu, studi kelayakan, analisis finansial   Financial analysis and feasibity study of bamboo cultivation  Abstract Bamboo cultivation is necessary to increase the population of bamboo clumps. The bamboo clumps tend to decrease due to the shift of used lands for residential or replaced by other crop comodities, which are considered more profitable. On the other hand, the need of bamboo for raw materials remain increase in line with population growth and the development of science. The important of the bamboo cultivation are to maintain the availability of its supply and to improve the quality of bamboo, which meet the market demands. This paper examined financial analysis of bamboo cultivation. Financial study was necessary to show whether

  2. MENENTUKAN PRIORITAS PILIHAN MAHASISWA DALAM MEMILIH KAMPUS MENGGUNAKAN ANALISIS CONJOINT

    Directory of Open Access Journals (Sweden)

    Maxsi Ary

    2016-03-01

    Full Text Available ABSTRACT - A private college is education marketers that need to identify students for educational products; educational products develop and implement a promotion to attract attention and give a strong response from prospective students. Advantages of private college to attract more students improved. The aim of this study is to analyze the preferences of students from the Department of Information Management AMIK Bandung BSI in choosing the campus. Research preferences in choosing college students conducted by applying conjoint analysis using SPSS 17.0. How that is done is to obtain a score of uses that can represent every aspect of campus services owned factor, so that on that score can be deduced about what attributes are most considered by the students in choosing a college. Results of the respondents preference highest-value is a factor field (14.92%, curriculum (13:21%, accreditation (12.75%, lecturer (12:13%, building (11.96%, library (11.87%, Distance (11.66% and advertising (11:46%. Results of the aggregate utility level factors/attributes chosen by respondents, that the respondents liked the selection of educational services in the campus is having a field campus, open curriculum (the administration delivered in advance at the beginning of registration, the campus has been accredited, senior lecturer option, the size of ordinary buildings (less noticed, the library has a large collection of books, the distance between the house and near the campus, and advertising less attention. Keywords: Multivariate Statistics , Conjoint Analysis , Preference ABSTAKSI - Perguruan tinggi swasta merupakan pemasar pendidikan yang perlu mengidentifikasi calon mahasiswa terhadap produk pendidikan, mengembangkan produk pendidikan dan menerapkan promosi untuk menarik perhatian dan memberi tanggapan yang kuat dari calon mahasiswa. Keunggulan perguruan tinggi swasta untuk menarik minat mahasiswa lebih ditingkatkan. Tujuan dari penelitian ini adalah

  3. Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Made Srinadi

    2014-06-01

    Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

  4. Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Made Srinadi

    2015-04-01

    Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

  5. Analisis Aliran Daya Berbasis Injeksi Arus dalam Bentuk Vektor

    Directory of Open Access Journals (Sweden)

    Ahmad Wira Satriawan

    2017-11-01

    Full Text Available Tulisan ini memaparkan hasil penelitian yang telah dilakukan untuk membandingkan metode analisis aliran daya berbasis injeksi arus dalam bentuk vektor dengan format polar dan rektangular. Penelitian ini dilakukan untuk memperoleh metode analisa aliran daya dengan perhitungan yang lebih cepat dan akurat, serta iterasi yang lebih sedikit. Metode iterasi Newton Raphson diadopsi dalam penelitian ini dan bahasa pemrograman Python serta library komputasinya digunakan. Analisis terhadap karakteristik konvergensi dari kedua format dilakukan pada IEEE 14-bus Test System. Dari penelitian ini diperoleh hasil bahwa format rektangular lebih unggul dibandingkan format polar untuk kasus yang diteliti.

  6. Assessment of the human factor in the quantification of technical system reliability taking into consideration cognitive-causal aspects. Partial project 2. Modeling of the human behavior for reliability considerations. Final report

    International Nuclear Information System (INIS)

    Jennerich, Marco; Imbsweiler, Jonas; Straeter, Oliver; Arenius, Marcus

    2015-03-01

    This report presents the findings of the project for the consideration of human factor in the quantification of the reliability of technical systems, taking into account cognitive-causal aspects concerning the modeling of human behavior of reliability issues (funded by the Federal Ministry of Economics and Technology; grant number 15014328). This project is part of a joint project with the University of Applied Sciences Zittau / Goerlitz for assessing the human factor in the quantification of the reliability of technical systems. The concern of the University of Applied Sciences Zittau / Goerlitz is the mathematical modeling of human reliability by means of a fuzzy set approach (grant number 1501432A). The part of the project presented here provides the necessary data basis for the evaluation of the mathematical modeling using fuzzy set approach. At the appropriate places in this report, the interfaces and data bases between the two projects are outlined accordingly. HRA-methods (Human Reliability Analysis) are an essential component to analyze the reliability of socio-technical systems. Various methods have been established and are used in different areas of application. The established HRA methods have been checked on their congruence. In particular the underlying models and their parameters such as performance-influencing factors and situational influences have been investigated. The elaborated parameters were combined into a hierarchical class structure. Cross-domain incidents were studied. The specific performance-influencing factors have been worked out and have been integrated into a cross-domain database. The dominant (critical) situational factors and their interactions within the event data were identified using the CAHR method (connectionism Assessment of Human Reliability). Task dependent cognitive load profiles have been defined. Within these profiles qualitative and quantitative data of the possibility of emergence of errors have been acquired. This

  7. Technical writing versus technical writing

    Science.gov (United States)

    Dillingham, J. W.

    1981-01-01

    Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

  8. ANALISIS FAKTOR KEHADIRAN DOSEN DI UNIVERSITAS X

    Directory of Open Access Journals (Sweden)

    Annisa Mulia Rani

    2016-10-01

    Full Text Available Aspek kualitas pekerjaan berkaitan langsung dengan waktu yang khusus digunakan dosen untuk mengembangkan kemampuan. Maka untuk merealisasikan kualitas dosen yang terbaik , pihak manajemen khusunya dekan membuat peraturan untuk kehadiran dosen adalah minimal 25 jam/minggu. Dengan peraturan ini diharapkan dosen dapat melaksanakan beban kerja dosen sebaik-baiknya. Peraturan ini tertulis dan tertuang pada SK Dekan No 20/2006 pada kampus X. Dengan Menggunakan Analisis faktor mencoba menemukan hubungan atar sejumlah variable-variabel yang awalnya saling independen satu dengan yang lain dimana variable penyebab kekurangan jam dosen datang/minggu adalah keluaraga, manajemen, hubungan social, fasilitas pengajaran, jarak/lokasi, kompensasi transport. Berdasarkan uji Bartley test dan Measure sample of adequate yang pertama maka dengan nilai sig 0.04 dan msa 0.540 . Dengan menggunakan metode principal component analysis maka pembentukan factor hanya ada 1 componen karena nilai eigen value yang mempunyai nilai diatas 1. Faktor pembentuk baru yaitu manajemen, kompensasi dan jarak menjadi satu component.

  9. Analisis Gameplay Game Genre Virtual Pet

    Directory of Open Access Journals (Sweden)

    Abi Senoprabowo

    2015-02-01

    Full Text Available Game adalah struktur interaktif yang membuat pemain berjuang menuju sebuah tujuan. Game dapat memberikan emosi dan mood, menghubungkan dengan orang latihan, sarana latihan, serta dapat memberikan edukasi. Salah satu game yang berkembang saat ini adalah game bergenre Virtual pet. Game virtual pet merupakan game simulasi memelihara sesuatu. Virtual pet memiliki gameplay yang menarik dan menyenangkan yang membuat pemain seolah-olah benar-benar memiliki binatang peliharaan mereka sendiri. Virtual pet dianggap oleh sebagian besar penggunanya dapat memberikan kegembiraan serta rasa kasih sayang karena tingkat interaksinya yang baik. Banyak pengembang game pemula yang mengembangkan genre ini sebagai game yang mereka buat karena kemudahaan dan tingkat penggunanya yang banyak. Akan tetapi banyak dari pengembang game pemula tidak memperhatikan tingkat keberlanjutan game virtual pet yang mereka buat sehingga membuat pemain cepat bosan. Pada penelitian ini, analisis game bergenre virtual pet yang sudah sukses dibuat seperti Zombigotchi, Tamagotchi Unicorn, dan Bird Land, diharapkan dapat membantu para pengembang game pemula agar mengetahui cara merancang dan mengembangkan game virtual pet dengan baik. Kata Kunci: game, gameplay, virtual pet

  10. ANALISIS MODEL KEPUASAN TERHADAP PEMBELIAN ULANG

    Directory of Open Access Journals (Sweden)

    Naili Farida

    2014-09-01

    Full Text Available Tujuan penelitian ini yaitu untuk menguji pengaruh brand equity, nilai pelanggan dan lifestyle yang dimediasi kepuasan konsumen terhadap pembelian ulang produk gadget di Kota Semarang. Responden dalam penelitian ini adalah seluruh konsumen yang telah melakukan pembelian produk gadget merek Samsung, sebanyak 120 orang. Teknik sampling yang digunakan yaitu purposive sampling. Teknik analisis yang digunakan yaitu Partial Least Square (PLS. Hasil penelitian menunjukkan bahwa terdapat pengaruh brand equity terhadap kepuasan, namun dalam konteks lifestyle dan nilai pelanggan tidak ada pengaruh terhadap kepuasan. Sedangkan kepuasan menunjukkan adanya pengaruh terhadap pembelian ulang. Diharapkan dari hasil penelitian ini mampu meningkatkan pembelian ulang melalui brand equity, lifestyle dan nilai pelanggan dalam konteks kepuasan. The objective of the research was to test the influence of brand equity, customer value and lifestyle which were mediated by consumer satisfaction toward re-purchasing of gadget products in Semarang. The respondents of the study were all consumers who have purchased Samsung gadget products. It was a purposive sampling study with 120 respondents. The data were analyzed by Partial Least Square (PLS. The result of the study showed that there was an influence of brand equity toward satisfaction, but in the lifestyle context and customer value did not give any influence toward satisfaction. Whereas; the satisfaction gave influence toward re-purchase. It is expected that this study can increase the repurchasethrough brand equity, lifestyle and customer values in the satisfaction context.

  11. Efektivitas dan Kendala Pembelajaran Sains Berbasis Inkuiri terhadap Capaian Dimensi Kognitif Siswa: Meta Analisis

    Directory of Open Access Journals (Sweden)

    Abdurrahman Abdurrahman

    2017-06-01

    Full Text Available In recent, inquiry-based learning is gaining popularity in science curricula, especially for international research and development projects as well as teaching and learning science. One of the underlying reasons is that its success can be significantly improved due to the recent technical developments that allow the inquiry process to be supported by various learning environments including information technology. Inquiry-based learning is often organized into inquiry phases that focused to build students process science skills. However, different variations on what is called the inquiry competence can be found throughout the literature. The current article focuses on identifying and summarizing the core features of inquiry-based learning by means of a systematic literature review and develops a synthesized inquiry process that combines the strengths of existing inquiry-based learning frameworks for enhancing students achievement. The review was conducted using the Web of Science and ERIC (Education Resources Information Center data base; a total of 15 articles describing inquiry phases or whole inquiry process were selected based on specific search criteria. An analysis of the articles resulted in the identification of five distinct general inquiry phases: Orientation, Conceptualization, Investigation, Discussion and Conclusion. Inquiry-based learning usually ends with the Conclusion phase. Based on analysis almost of the study showed that inquiry-based learning has shown students’ increasing in cognitive achievement significantly.   Akhir-akhir ini, pembelajaran berbasis inkuiri semakin populer di kurikulum sains, terutama untuk penelitian dan pengembangan dan pembelajaran sains global. Salah satu alasan utamanya adalah keberhasilannya dalam meningkatkan kompetensi belajar sains siswa secara signifikan, yang perkembangannya saat ini sangat memungkinkan terjadinya proses inkuiri yang didukung oleh berbagai lingkungan belajar termasuk

  12. Technical evaluation of the electrical, instrumentation, and control design aspects of the proposed license amendment Revision 1 for single-loop operation of Browns Ferry Nuclear Plants (Docket No. 50-259, Unit 1; Docket No. 50-260, Unit 2; Docket No. 50-296, Unit 3)

    International Nuclear Information System (INIS)

    Donich, T.R.

    1983-01-01

    This report documents the technical evaluation of the proposed changes to the plant reactor protection system by the licensee of Browns Ferry Nuclear Power Station, Units 1, 2, and 3, to account for single-loop plant operation. This evaluation is restricted to only the electrical, instrumentation and control design aspects of proposed changes to the plant technical specifications for single-loop operation beyond 24 hours. Conclusion is that the license amendment for single-loop operation has met the review criteria provided sufficient administrative controls are in effect, and any anomalous control room indicators are corrected or warning-tagged for the duration of single-loop operation

  13. ANALISIS KONTRIBUSI PAJAK HOTEL TERHADAP PENDAPATAN ASLI DAERAH KABUPATEN NUNUKAN

    OpenAIRE

    -, MULIATI

    2014-01-01

    2014 Analisis Kontribusi Pajak Hotel terhadap Pendapatan Asli Daerah Kabupaten Nunukan Analysis of The Contributions Tax on Hotel Againts Regional Renenue Nunukan District Muliati Haerial M. Christian Mangiwa Penelitian ini bertujuan untuk mengetahui seberapa besar kontribusi pajak hotel terhadap pendapatan asli daerah, mengetahui sistem pengawasan, dan potensi yang ada untuk meningkatkan pajak hotel, mengetahui sistem dan prosedur...

  14. Analisis Sektor/Sub Sektor Unggulan di Kabupaten Bungo

    Directory of Open Access Journals (Sweden)

    Gafur Gafur

    2016-03-01

    Full Text Available Abstract. This study aimed to analyze the leading sectors in Bungo. The method used is Location Quotient (LQ, Dynamic Location Quotient (DLQ, specialization index, Growth Ratio Model (MRP. Based on analysis of LQ and DLQ, there are only two basis sectors at present and in the future, namely the construction sector and trade, hotels and restaurants. Based on the analysis of Specialization Index, in Bungo Regency has a concentration of the economy in the agricultural sector and the manufacturing sector. Based on MRP analysis also showed that prominent sector growth at the level of Bungo and Jambi Province, namely electricity, gas and water supply; the building sector; and trade, hotels and restaurants. Keywords : Location Quotient (LQ, Dinamic Location Quotient (DLQ, Specialization Index, Growth Ratio Model   Abstrak. Penelitian ini bertujuan untuk menganalisis sektor unggulan di Kabupaten Bungo. Metode yang digunakan adalah analisis Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan (MRP. Berdasarkan analisis LQ dan DLQ,  hanya ada 2 sektor yang menjadi sektor basis pada saat ini dan pada masa yang akan datang yaitu sektor bangunan dan sektor perdagangan, hotel dan restoran. Berdasarkan analisis Indeks Spesialisasi, di Kabupaten Bungo telah terjadi konsentrasi ekonomi pada sektor pertanian dan sektor industri pengolahan. Berdasarkan analisis MRP juga dapat diketahui bahwa sektor yang menonjol pertumbuhannya pada tingkat Kabupaten Bungo dan Provinsi Jambi yaitu sektor listrik, gas dan air bersih; sektor bangunan; serta sektor perdagangan, hotel dan restoran. Kata Kunci : Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan

  15. Endoscopic endonasal transsphenoidal approach for pituitary adenomas: technical aspects and report of casuistic Abordagem endoscópica endonasal para adenomas de hipófise: aspectos técnicos e relato de casuística

    Directory of Open Access Journals (Sweden)

    Américo Rubens Leite dos Santos

    2010-08-01

    Full Text Available OBJECTIVE: Analyse technical aspects, effectiveness and morbidity of the endoscopic endonasal transphenoidal approach for pituitary adenomas. METHOD: From January 2005 to September 2008, 30 consecutive patients underwent endoscopic endonasal resection of pituitary adenomas with a follow up from 3 to 36 months. Their medical charts were retrospectively analysed. RESULTS: There were 18 women and 12 men, mean age 44 years (range 17-65 yr. Among the 30 patients, 23 had macroadenomas and 7 microadenomas. Twelve patients had non-functioning tumors, 9 had ACTH-secreting tumors, 8 had GH-secreting tumors and 1 prolactinoma. Complete resection and hormonal control was achieved in all microadenomas. Macroadenomas were completely removed in 6 patients, subtotal resection in 6 and partial resection in 11. Three patients had diabetes insipidus and 5 had CSF leaks treated with lumbar drainage. CONCLUSION: The endonasal endoscopic approach for pituitary tumors is effective and has low morbidity.OBJETIVO: Analisar aspectos técnicos, eficácia e morbidade do acesso transesfenoidal endonasal endoscópico para adenomas hipofisários. MÉTODO: Estudo retrospectivo de trinta pacientes consecutivos submetidos à ressecção endoscópica endonasal de adenomas hipofisários, entre janeiro de 2005 e setembro de 2008, com seguimento pós-operatório entre três e 36 meses. RESULTADOS: Foram operados 18 mulheres e 12 homens com idades variando entre 17 e 65 anos (média 44 anos. Entre os 30 casos operados, 23 eram macroadenomas e sete microadenomas. Doze pacientes apresentavam adenomas não-funcionantes, nove tumores secretores de ACTH, oito tumores secretores de GH e um prolactinoma. Ressecção macroscópica completa e controle endócrino foram conseguidos em todos microadenomas. Ressecção dos macroadenomas foi completa em seis pacientes, subtotal em seis e parcial em seis casos. Três pacientes desenvolveram diabetes insipidus e cinco tiveram fístula liqüórica p

  16. ANALISIS KINERJA DENGAN MENGGUNAKAN PENDEKATAN RASIO CAMEL

    Directory of Open Access Journals (Sweden)

    Sri Murdiati

    2015-06-01

    Full Text Available Tujuan penelitian ini adalah untuk menganalisis tingkat kesehatan bank dilihat dari kategori CAMEL. Metode penelitian yang digunakan adalah studi kasus di PD BPR BKK Banjarharjo.Dalam menguji hipotesis digunakan alat analisis CAMEL. Hasil penelitian ini yaitu modal pada 2008 sampai 2010 termasuk dalam kriteria sehat. ROA meningkat 2008 sampai 2010 dengan kriteria sehat bagi biaya operasional yang dikeluarkan oleh pendapatan operasional yang seimbang. Rasio Kas tahun 2008 sampai 2010 termasuk dalam kriteria sehat berarti bank memiliki kemampuan untuk mengelola asset yang digunakan untuk membayar kewajiban. LDR mengalami tren yang signifikan selama tahun 2008 sampai 2010 sehingga dana yang diterima bank untuk meningkatkan baik tabungan, deposito berjangka, modal inti, yang berarti kemampuan bank untuk meningkatkan penyaluran kredit, IRR menunjukan nilai positif dalam menghadapi resiko pasar.Pengembangan tingkat kesehatan pada tahun 2008 sampai 2010 untuk komponen Capital, Assets, Laba dan Likuiditas meningkat. The goal of this research is to analyze the healtiness of banks seen from CAMEL category. The research applied a case study in PD BPR BKK Banjarharjo. The hypotheses tested using CAMEL analysis tools. The result of the study is that the modal used 2008 until 2010 is consideredin a healthy criteria. The increasing ROA in 2008 until 2010 is considered healthy criteria for operational expenses incurred by the operating income. Such condition meant that the banks are able to manage the assets which are used to pay the obligations. The significant increasing of LDR over the years 2008 until 2010 makes the received funds by the bank to increase the savings deposits, time deposits and the core capital. As the recunts, the banks are able to increase credit disstribution. More over, the IRR showed a positive values in the face of market risks and the development of healthy levels in 2008 until 2010 for the components of Capital, Assets, Earnings and

  17. ANALISIS TRANSIEN PADA PASSIVE COMPACT MOLTEN SALT REACTOR (PCMSR

    Directory of Open Access Journals (Sweden)

    M. Makrus Imron

    2015-04-01

    Full Text Available Penggunaan bahan bakar cair berupa garam LiF-BeF2-ThF4-UF4 pada Passive Compact Molten Salt Reactor (PCMSR meyebabkan pengendalian daya pada PCMSR dapat dilakukan dengan mengendalikan laju aliran bahan bakar dan pendingin. Sedangkan dari sistem keselamatan, penggunaan bahan bakar cair menjadikan PCMSR memiliki karakter keselamatan melekat (inherent safety yang baik. Pada penelitian ini telah dilakukan analisis transien PCMSR pada tiga kondisi, yaitu: ketika terjadi perubahan laju aliran bahan bakar, ketika terjadi perubahan laju aliran pendingin dan ketika terdapat kegagalan pada sistem pelepasan panas (loss of heat sink. Penelitian dilakukan dengan memodelkan reaktor pada kondisi tunak menggunakan paket program. Standart Reactor Analysis Code (SRAC. Selanjutnya dari keluaran paket program SRAC diperoleh data data yang meliputi fluks netron,konstanta grup, kontanta peluran prekusor netron, fraksi netron kasip untuk perhitungan transien. Penelitian ini menunjukkan bahwa penurunan laju aliran bahan bakar sebesar 50 % dari laju bahan bakar sebelumnya, menyebabkan daya pada PCMSR turun menjadi 78 % dari daya sebelumnya. Dan penurunan laju aliran pendingin sebesar 50 % dari laju pendingin sebelumnya, menyebabkan daya pada PCMSR turun menjadi 63 % dari daya sebelumnya. Sedangkan pada saat terjadi loss of heat sink daya PCMSR menunjukkan penurunan. Kata kunci: PCMSR, transien, daya, laju aliran.   The use of liquid fuels in the form of molten salts LiF-BeF2-ThF4-UF4 in Passive Compact Molten Salt Reactor (PCMSR makes power control at PCMSR can be done by controlling the flow rate of fuel and coolant. In addition, from safety systems aspect, the use of liquid fuels makes PCMSR has good inherent safety characteristics. In this study transient analysis has been carried out on three conditions of PCMSR, namely when the fuel flow rate is changing, when the coolant flow rate is changing and when there is loss of heat sink condition. This research is

  18. Analysis, method and techniques for the studying of Cesium-137 transfer from soil to plants (maize and beans) (continuation of the technical report GSR-91-20); Analisis, metodo y tecnicas para estudio de transferencia de Cesio-137 de suelo a plantas (maiz y frijol) (continuacion del informe tecnico GSR-91-20)

    Energy Technology Data Exchange (ETDEWEB)

    Cervantes N, M L

    1992-12-15

    In this report the complete results of transfer of corn and bean whose objective is to determine the transfer of Cs-137 via: soil {yields} root {yields} plant, which is determined by the transfer factors or concentration factors (FC), which indicates the incorporation from Cs-137 to soil and plant starting from two models of compartments which were already described in the technical report GSR-91-20-1 that precedes to this are presented. These results correspond to that carried out during the agricultural cycle of 1991, as well as the first results corresponding to 1992 in the radioactive wastes storage center (CADER) in Mexico. (Author)

  19. The free access to the Brazilian power transmission system - contract, technical-operational and legal involved aspects; O livre acesso ao sistema de transmissao brasileiro - aspectos contratuais, tecnico-operacionais e legais envolvidos

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Sizenando Figueira de [Companhia Hidro Eletrica do Sao Francisco (CHESF), Recife, PE (Brazil)]. E-mail: sizenand@chesf.gov.br

    2001-07-01

    Facing the indefinites still existents in the present legislation, the concessionaires and permissionaries enterprises are reaching for the definition of politics for the technical negotiation-commercial for attending the new acessants, in a way to minimize the technical-operational risks for their transmission physical systems and respective facilities, and the identification of the involved direct and indirect costs during the stages of construction, pre-operation and commercial operation of the new connection.

  20. Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, N. [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

    1995-12-31

    In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

  1. Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, N [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

    1996-12-31

    In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

  2. Pecan cultivation: general aspects

    Directory of Open Access Journals (Sweden)

    Diniz Fronza

    2018-02-01

    Full Text Available ABSTRACT: Given the increasing investment in the pecan production in southern Brazil, it becomes necessary researches, assisting in solve problems and proposition of technical and methodology to enhance this production chain. Thus, the present review aimed to survey the existing information about the culture, both on the world and the Brazilian scene. Issues related to botany, climate and soil requirements, alignment and planting density, cultivars, pests and diseases, among other technical aspects of this culture will be addressed. Pecan nut presents nutraceutical properties that are beneficial to human health, which has increased its demand from consumers. However, there are few research results with pecan nut in Brazil and there are many gaps in scientific knowledge about this culture, especially as regards the management of pests and diseases control, irrigation and nutrition, in Brazilian conditions.

  3. Analisis Faktor Hasil Penilaian Budi Pekerti

    Directory of Open Access Journals (Sweden)

    - Hadiwinarto

    2014-12-01

    Full Text Available The purpose of this study was to describe the load factor of the assessment results on character education for high school students. The subjects were 545 second grade students. There were four instruments used, namely: cognitive aspect, affective aspect, behavioral aspect in the learning process and behavioral aspect outside the learning process. Each aspect contains nine indicators as factors. Data were analyzed with factor analysis technique and the models used were the Confirmatory Model of Principal Components Analysis with the varimak rotation method and Kaiser normalization. The results showed that each of these factors were statistically independent, not associated with other indicators. These findings reinforced the theories used in this study that character education loads indicators of dedication, conviction, honesty, discipline, tolerance, democracy, sense of belonging, gratitude and empathy. Statistically, each indicator obviously has four aspects of character. Therefore, assessment of manners that includes the aspects of cognitive, affective and behavior is a task that absolutely must be done. Keywords: character, factor analysis, cognitive, affective and behavioral

  4. Analisis Pembiayaan Kesehatan Keluarga Penderita Talasemia

    Directory of Open Access Journals (Sweden)

    Arif Kurniawan

    2013-04-01

    Full Text Available Pembiayaan kesehatan sekitar 146 (60% penderita talasemia di Banyumas, tahun 2011 ditanggung rumah tangga dalam bentuk pembayaran langsung (out of pocket payment. Penelitian ini bertujuan untuk menganalisis ability to pay, willingness to pay, dan need assessment pembiayaan kesehatan penderita talasemia di Kabupaten Banyumas. Jenis penelitian ini adalah observasional analitik dengan rancangan studi kasus. Penelitian ini menggunakan desain studi cross sectional dengan teknik pengambilan sampel simple random sampling. Jumlah sampel penelitian 30 responden yang mempunyai anggota keluarga penderita talasemia di Kabupaten Banyumas. Hasil penelitian menunjukkan keluarga penderita talasemia mempunyai ability to pay rata-rata adalah Rp34.448,8/bulan dan rata-rata willingness to pay pengobatan talasemia adalah Rp133.833,3/ bulan. Pola pembiayaan kesehatan talasemia di Kabupaten Banyumas menggunakan 93,3% Jaminan Kesehatan Masyarakat (Jamkesmas, 3,3% biaya sendiri, dan 3,3% asuransi kesehatan. Sebelum mendapatkan Jamkesmas, 90,0% responden membayar dengan out of pocket, berhutang, berhemat pada kebutuhan nonkesehatan, dan menjual perhiasan/sawah. Kebutuhan pelayanan kesehatan yang diharapkan keluarga penderita talasemia adalah konsultasi talasemia dan desain khusus ruang perawatan anak. Kebutuhan pembiayaan kesehatan keluarga penderita talasemia adalah uang transportasi ke rumah sakit sebagai bentuk biaya tidak langsung. Health financing of majority thalassemia patients, around 146 people (60% in Banyumas year 2011 is assured by Households in direct payments to health care providers (out-of-pocket payment. This study aimed to analyze the ability to pay, willingness to pay, and need assessment of health financing thalassemia in Banyumas. This research an analytic observation- Analisis Pembiayaan Kesehatan Keluarga Penderita Talasemia Health Financing Analysis of Thalassemia Patient Family Arif Kurniawan, Arih Diyaning Intiasari al with case study design

  5. Organization aspect

    NARCIS (Netherlands)

    Grefen, P.W.P.J.; Mehandjiev, N.; Mehandjiev, N.; Grefen, P.W.P.J.

    2010-01-01

    Following the BOAT framework discussed in Chapter 1, this chapter describes the organization aspect of the CrossWork approach. It shows how the business requirements identified in the previous chapter can be fulfilled by dynamic organization structures and business processes in Networks of

  6. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... in cooperation and development of ICTs seems to pass unnoticed. However, since they are aligned into ICTs, technicities impact innovation....

  7. Analisis Komoditi Unggulan Subsektor Tanaman Pangan di Sumatera Utara Tahun 2010 – 2014

    OpenAIRE

    Sinaga, Terry Praganda

    2016-01-01

    Tujuan penelitian ini adalah untuk mengetahui perkembangan produksi komoditi tanaman pangan selama periode tersebut sehingga dapat menganalisis komoditi subsektor tanaman pangan yang menjadi unggulan di Sumatera Utara. Komoditi unggulan tersebut juga dijabarkan untuk setiap kabupatem/kota yang ada di Sumatera Utara. Metode yang digunakan yaitu secara Convenience Sampling, dan metode analisis data dengan menggunakan analisis Location Quotient. Hasil penelitian menyimpulkan ba...

  8. ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN

    OpenAIRE

    ARIANTY, ASTRI

    2012-01-01

    ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN COMPANY FINANCIAL PERFORMANCE ANALYSIS PT. INSURANCE JIWASRAYA (LIMITED) SOUTH BRANCH SULAWESI Astri Arianty Prof. Dr. H. Muhammad Ali, SE., M.S Drs. Armayah Sida, M.Si Analisis terhadap kinerja keuangan perusahaan sangat penting dilakukan untuk mengetahui sejauh mana tingkat pencapaian yang telah diperoleh perusahaan sebagaimana tujuan perusahaan dalam menjalankan proses produk...

  9. ANALISIS PENGENDALIAN DAYA REAKTOR PCMSR DENGAN LAJU ALIR PENDINGIN

    Directory of Open Access Journals (Sweden)

    Iqbal Syafin Noha

    2015-03-01

    Full Text Available Passive Compact Molten Salt Reactor (PCMSR merupakan pengembangan dari Molten Salt Reactor (MSR yang memiliki karakter berbeda dengan lima reaktor generasi IV lainnya, yaitu menggunakan bahan bakar leburan garam. Pada reaktor MSR, garam lebur tidak digunakan sebagai pendingin tetapi digunakan sebagai medium pembawa bahan bakar. Dengan fase bahan bakar yang berupa garam lebur LiF-BeF2-ThF4-UF4, maka dapat dilakukan pengendalian daya dengan mengatur laju aliran bahan bakar dan pendingin. Tujuan penelitian ini adalah untuk mengetahui pengaruh perubahan laju alir pendingin terhadap daya reaktor PCMSR. Analisis dilakukan dengan empat jenis masukan untuk perubahan laju alir pendingin, yaitu masukan step, ramp, eksponensial, dan sinusoidal. Untuk masukan step, laju alir pendingin dibuat berubah secara mendadak. Selanjutnya untuk masukan ramp dan eksponensal, perubahan laju alir masing-masing dibuat perlahan secara linear dan mengikuti fungsi eksponensial. Kemudian untuk masukan sinusoidal, laju alir berubah naik turun secara periodik dengan memvariasikan frekuensi dari perubahan laju alir tersebut. Hasil penelitian menunjukkan bahwa penurunan laju alir pendingin sebesar 50% dari laju pendingin sebelumnya, menyebabkan daya pada reaktor PCMSR turun sebesar 63% dari daya sebelumnya. Jika terjadi fluktuasi laju aliran pendingin, maka semakin cepat perubahan tersebut, maka respon daya yang diberikan semakin kecil. Pada frekuensi yang sangat cepat, daya reaktor menjadi konstan dan cenderung tidak memiliki respon terhadap laju aliran. Hal ini merupakan salah satu aspek keselamatan reaktor, karena reaktor tidak merespon perubahan yang terlalu cepat. Kemampuan reaktor mengatur daya menyesuaikan laju aliran pendingin merupakan aspek keselamatan lainnya. Kata kunci : PCMSR, pengendalian daya, laju alir pendingin, uji respon   Passive Compact Molten Salt Reactor (PCMSR is the development of Molten Salt Reactor (MSR which has different character from other five

  10. Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

    OpenAIRE

    Nurul Dzakiya; MGS. Dwiki Nugraha; Nenden L. Sidik; Trias Galena

    2017-01-01

    Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m), lempung pasiran (11-30 m) dan lapukan batuan diorit (30-55 m) yang berada di kedalaman berbeda. Ketebalan batuan di pe...

  11. Analisis Sikap Konsumen terhadap Produk Fashion Lokal dan Impor

    OpenAIRE

    Setiawan, Evelyn

    2014-01-01

    Abstrak: Analisis Sikap Konsumen Terhadap Produk Fashion Lokal dan Impor. Penelitian ini bertujuan untuk menganalisis sikap konsumen terhadap produk fashion lokal dan impor yang akan berpengaruh terhadap keputusan konsumsi. Sampel yang akan digunakan dalam penelitian ini adalah 1.000 mahasiswa dari 10 perguruan tinggi swasta terbesar di Surabaya. Pengambilan data dilakukan dengan metode kuesioner. Hasil pengujian statistik menunjukkan bahwa sebagian besar mahasiswa di Surabaya merasa bangga d...

  12. Uso de Analisis de Covarianza (ANCOVA en investigacion cientifica.

    Directory of Open Access Journals (Sweden)

    Badii, M.H.

    2008-01-01

    Full Text Available The basics of the ANalisis of COVAriance (ANCOVA are given. The objectives and the application of ANCOVA are laid out. Techniques for the estimation of contrasts and for the control and reduction of the degree of error are discussed. The application of a simple ANCOVA using real data is highlighted. The application of this technique in fixing the auxiliary variable in experimentation is emphasized.

  13. Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan

    OpenAIRE

    Fachri, Yusrizal

    2017-01-01

    130306044 YUSRIZAL FACHRI, 2017. “Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan”. Dibimbing oleh ARMYN HAKIM DAULAY dan NEVY DIANA HANAFI. Penelitian ini bertujuan untuk mengidentifikasi karakteristik lembaga pemasaran, bentuk saluran, fungsi pemasaran, dan menganalisis nilai tambah di lembaga-lembaga pemasaran ayam ras pedaging di pasar tradisional Kota Medan pada April sampai Mei 2017. Penelitian ini menggunakan data primer yang didapatkan dari observasi dan waw...

  14. Metode Pengumpulan dan Analisis Data : Lang Kah Vital Proses Penelitian

    OpenAIRE

    Suprapto, Agus .

    2005-01-01

    The process of data collection and. analysis is one of chains in scientific method that should be done in a research. This part later on will determine the right method in searching and analyzing a way in solving a problem. The data collected should be the ones which are relevant which the essence of research problems, so that the next interpreted data will eventually be concluded as valid. keywords: Pengumpulan data, analisis data,dan metode ilmiah

  15. ANALISIS KEPUASAN PELANGGAN PDAM KOTA DENPASAR DITINJAU DARI ASPEK TEKNIS

    Directory of Open Access Journals (Sweden)

    Separdi Haja

    2015-02-01

    Full Text Available Abstract : Regency Water Supply Company (PDAM of Denpasar city is one of the PDAM that have a healthy predicate from 2009-2012 based on the results by the assessment Development Support Agency of Water Supply System (BPPSPAM. But in fact many customer complaints are heard in the newspaper and electronic media. From PDAM of Denpasar city annual report in 2013, there were 6,738 cases of complaints regarding service and 83.38 percent came from the technical aspect. This research aims to determine the level of customer satisfaction, the indicators that affect customer satisfaction and indicators affecting what should be improved to increase customer satisfaction reviewed from technical aspect. This research was conducted in Denpasar city with the 398 respondents who are household customer PDAM of Denpasar. The analysis took based on the Importance-Performance analysis and Gap analysis. Importance-Performance analysis resulted in indicators of influence and should be improved to increase customer satisfaction. While the Gap analysis  showed the level of customer satisfaction PDAM of Denpasar city. The majority of customer were dissatisfied with the service received from technical aspects. Shown from the Gap of -1.01 and suitability level of performance and the importance is worth 0.76 (less than 1. The level of customer satisfaction PDAM Denpasar city for complaints of the piping aspect (-1.09 is at a low level satisfaction (-1,059 < I < -1,01, while satisfaction level for the water quality (-0.982, water continuity (-0.975, speed installation of new connections (-1.003 and water meters (-0.973 are at moderate levels of satisfaction(-1,01 < I < -0,961. The indicators that affect customer satisfaction are the clarity of the water, smelly water, flavored water, chemical content, hours of availability of water in the life activity, alertness operators in the installation of new connection, reading the water meter, water meter repair damage, and

  16. ANALISIS PENGARUH KINERJA LINGKUNGAN TERHADAP KINERJA INDUSTRI KECIL

    Directory of Open Access Journals (Sweden)

    Sukirman -

    2012-03-01

    Full Text Available Tujuan penelitian adalah mengidentifikasi, menganalisis praktik pengelolaan lingkungan pada sentra industri kecil dibandingkan best practices dalam upaya meningkatkan kinerja lingkungan di Kabupaten Pati. Kajian difokuskan pada pengelolaan lingkungan secara efektif dengan melibatkan variabel inisiatif lingkungan, keterlibatan karyawan, dan integrasi dengan supplier. Populasinya adalah seluruh perusahaan Industri Kecil di Kabupaten Pati. Sampel berjumlah 97 perusahaan. Teknik sampling menggunakan kluster sampling, dengan sampel pada sentra industri kecil di Kabupaten Pati.  Analisis menggunakan analisis deskriptif dan analisis komparatif. Hasil penelitian menunjukkan praktik pengelolaan lingkungan pada sentra industri kecil di Kabupaten Pati belum dilaksanakan secara optimal. Sementara itu, variabel integrasi supplier berpengaruh langsung terhadap kinerja perusahaan.The purpose of this study is to identify and to analyze an environmental management practice which is compared to the best practices in order to improve environmental performance in the industrial centers in Pati District. This study focuses on managing the environment effectively by involving environmental initiative variables, employee involvement, and integration of suppliers. Population in this study was all small industrial enterprises in Pati regency which has 97 companies as data samples. Data were collected by using cluster sampling techniques, and samples were taken from small industrial centers in the District of Pati. Data were analyzed by using descriptive and comparative methods. Results of this study showed that environmental management practices in small industrial centers had not been implemented optimally. Meanwhile, supplier integration variables influenced directly toward corporate performance.

  17. Microfinanza: analisi d’impatto di un programma in India

    Directory of Open Access Journals (Sweden)

    Tommaso Rondinella

    2005-03-01

    Full Text Available L’analisi d’impatto dei programmi di microfinanza è uno strumento utile sia per migliorare i servizi offerti sia per garantire ai donatori che il denaro concesso sia utilizzato per programmi efficaci nell’alleviare la povertà. Il presente lavoro è costituito da due parti: la prima è dedicata all’analisi d’impatto, la seconda all’analisi empirica sul campo. L’indagine è stata condotta attraverso l’utilizzo di uno strumento in grado di dare una indicazione chiara dei cambiamenti avvenuti nelle condizioni di vita dei beneficiari e con il pregio di essere applicabile a costi molto ridotti. I risultati ottenuti mostrano in che misura l’accesso al credito cambi le condizioni di vita dei più poveri inducendo consistenti aumenti del reddito familiare, dei risparmi, della diversificazione delle attività produttive e del consumo di cibo. Inoltre si osserva, all’interno dei nuclei familiari, un miglioramento della condizione femminile chiaramente dipendente dalla partecipazione al programma di microcredito

  18. ANALISIS CLUSTER K-MEANS DALAM PENGELOMPOKAN KEMAMPUAN MAHASISWA

    Directory of Open Access Journals (Sweden)

    B. Poerwanto

    2016-12-01

    Full Text Available Abstract. Cluster Analysis, K-Means Algorithm, Student Classification. This study aims to classify students based on learning outcomes for subject the basic of statistics (DDS, which is measured based on attendance, task, midterm (UTS, and final exams (UAS to further used to evaluate learning for subjects that require analysis of quantitative . This study uses k-means cluster analysis to classify the students into three groups based on learning outcomes. After grouped, there are 3 people in the low category, 27 in the medium category and over 70% in the high category.Abstrak. Analisis Cluster K-Means dalam Pengelompokan Kemampuan Mahasiswa. Pene-litian ini bertujuan untuk mengelompokkan mahasiswa berdasarkan hasil belajar mata kuliah dasar-dasar statistika (DDS yang diukur berdasarkan variabel nilai kehadiran, tugas, ujian tengah semester (UTS, dan ujian akhir semester (UAS untuk selanjutnya digunakan untuk mengevaluasi pembelajaran untuk mata kuliah yang membutuhkan kemampuan analisis kuantititatif yang baik. Penelitian ini menggunakan analisis cluster k-means dalam mengelompokkan mahasiswa ke dalam tiga kelompok berdasarkan hasil belajarnya. Seteleh dikelompokkan, terdapat 3 orang yang masuk pada kategori rendah, 27 orang pada kategori sedang dan lebih dari 70% pada kategori tinggi.Kata Kunci: Cluster Analysis, K-Means Algoritma, Klasifikasi Mahasiswa, Universitas Cokroaminoto Palopo

  19. Estetika Tari Minang dalam Kesenian Randai Analisis Tekstual-Kontekstual

    Directory of Open Access Journals (Sweden)

    Sri Rustiyanti

    2013-03-01

    Full Text Available ABSTRACT   This paper reveals textual and contextual Randai, among other things, an analysis of Gerak Ga­ lombang Randai, an analysis of the character of Anak Randai, and at the end of the study series, to reveal the values contained in Randai as a cultural reality, which in principle is an inseparable part of the existence of Minangkabau community as the cultural support. The variety of motion used in Gerak Galombang Randai is not only a decoration of the motion beauty (tangible, but it also can be translated, as well as a symbol or emblem that has educational meanings (intangible, and can be an example of the daily life of the indigenous Minangkabau society.   Keywords: Minang Dance aesthetic, Randai, textual­contextual analysis     ABSTRAK   Tulisan ini mengungkap teksual dan kontekstual Randai, di antaranya, analisis terhadap gerak galombang Randai, analisis karakter tokoh anak Randai, dan sebagai akhir dari rang- kaian penelitian ini, mengungkapkan nilai-nilai yang terdapat pada Randai sebagai realitas budaya, yang pada prinsipnya merupakan bagian yang tak dapat dipisahkan dari eksistensi masyarakat Minangkabau sebagai penyangga kebudayaan. Ragam gerak yang digunakan dalam gerak galombang Randai itu kiranya tidak hanya sekedar hiasan keindahan gerak be- laka (tangibel, namun ia dapat diterjemahkan, sekaligus merupakan simbol atau lambang yang bermakna  mendidik (intangibel, dan dapat   menjadi teladan dalam kehidupan se- hari-hari dalam masyarakat adat di Minangkabau.   Kata Kunci: estetika Tari Minang, Randai, analisis tekstual-kontekstual

  20. Analisis Termal High Pressure Feedwater Heater di PLTU PT. XYZ

    Directory of Open Access Journals (Sweden)

    Maria Ulfa Damayanti

    2017-01-01

    Full Text Available Abstrak- PT. XYZ mengoperasikan tiga unit Pembangkit Listrik Tenaga Uap (PLTU unit 3, 7 dan 8 berkapasitas 2.030 MegaWatt. Pada PLTU Paiton unit 7 dan 8 terdapat delapan buah feedwater heater yaitu empat buah Low Pressure Water Heater (LPWH, tiga buah High Pressure Water Heater (HPWH, dan sebuah dearator. Pada PLTU Paiton unit 7 dan 8 terdapat kerusakan pada HPWH 6 yang menyebabkan penurunan efisiensi dari siklus secara keseluruhan. Penurunan efisiensi dapat terjadi karena temperatur feedwater sebelum masuk ke boiler terlalu rendah, sehingga kalor yang dibutuhkan oleh boiler untuk memanaskan feedwater meningkat. Oleh karena itu konsumsi batubara akan meningkat dan menyebabkan terjadi kenaikan biaya operasional harian dalam sistem pembangkit. Dari data Divisi Produksi PT. XYZ Unit 7 dan 8 diperoleh spesifikasi HPWH 6, 7, dan 8 dan propertis fluida dalam HPWH 6, 7, dan 8. Data tersebut digunakan sebagai dasar analisis termal yang meliputi performa masing-masing HPH. Tahap selanjutnya dalam analisis termal adalah memvariasikan beban 25%, 50%, 75%, 100%, dan 105%. Tahap terakhir analisis adalah menghitung performa dengan variasi sumbatan (plug 5%, 10%, 15%, dan 20% sesuai dengan variasi beban. Hasil yang didapatkan dari penelitian tugas akhir ini adalah nilai effectiveness tertinggi tercapai pada pembebanan 100% serta menghasilkan pressure drop tertinggi pada pembebanan 105%, nilai effectiveness terbesar serta nilai pressure drop terkecil terjadi pada zona Condensing, serta sumbatan (plugging pada HPH akan menyebabkan penurunan nilai effectiveness dan kenaikan pressure drop sisi tube.

  1. Deficiencies of the technical code of the construction (CTE) in relation to the climatologic data bases that use. Analysis realised for Galicia; Deficiencias del codigo tecnico de la edificacion (CTE) en relacion a las bases de datos climatologicas que utiliza. Analisis realizado para Galicia

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, M.; Izquierdo, P.; Santos, J.

    2008-07-01

    A series of deficiencies of the spanish Technical Building Code (TBC) are showed up, that are observed when trying to apply it to the geographical area of Galicia, and that, to a large extent, have their origin in the old and deficient climate data base in which it is based. In general, the TBC suffers from ambiguity and imprecision in the numerical values that it provides for the different variables and parameters, and shows incoherencies in the assignment of the solar radiation climatic zones and inaccuracies in the graphs of losses of solar radiation caused by the orientation and slope of the plane, and in the tables of losses of solar radiation caused by shadows. It is rough in the assignment of the zones of climatic severity, and establishes disproportionate criteria of temperature extrapolation which, in addition, originate values out of range in the calculation of the relative humidities. The consequences of this fault of the CTE are especially serious when applying the energy-saving requirements HE 1, HE 4 and HE 5 to Galicia. (Author)

  2. Technical and economic aspects of thermo-chemical decomposition of biomass in the processes of transformation of it in power-consuming energy/carriers by the use of the concentrated gel of sun radiation, has been considered

    International Nuclear Information System (INIS)

    Sultanova, K.D.; Mustafayeva, R.M.; Rzayev, P.F.

    2007-01-01

    Full text: The technical and economic assessment of process of thermo-chemical decomposition of biomass in the processes of transformation of it in power-consuming energy/carriers by the use of the concentrated gel of sun radiation, has been considered

  3. ANALISIS KEMAMPUAN MENATA ARSIP SISWA JURUSAN ADMINISTRASI PERKANTORAN

    Directory of Open Access Journals (Sweden)

    Bunga Aprilia Kartini

    2016-02-01

    Full Text Available Salah satu kemampuan yang harus dimiliki Program Administrasi Perkantoran adalah kompetensi dasar penataan dokumen. Kompetensi yang diharapkan dari kompetensi penataan dokumen adalah dapat menyimpan dan menemukan kembali dokumen/arsip sesuai dengan sistem yang diterapkan dalam perusahaan. Pembelajaran yang terjadi di SMK PGRI 2 Salatiga, siswa jurusan Administrasi Perkantoran tidak mendapatkan praktik menemukan kembali arsip/dokumen serta tidak ada laboratorium khusus kearsipan. Hal ini tentu akan mempengaruhi kemampuan lulusan dari siswa-siswanya. Kemampuan tersebut akan berujung pada kemampuan lulusan dalam memenuhi standar kerja suatu perusahaan atau organisasi. Populasi dalam penelitian ini yaitu seluruh siswa kelas XI Jurusan Administrasi Perkantoran SMK PGRI 2 Salatiga yang terdiri dari 2 kelas dengan jumlah 64 siswa. Penelitian ini merupakan penelitian deskriptif kuantitatif dengan teknik pengumpulan data menggunakan metode wawancara, observasi dan kuesioner. Teknik analisis data yang digunakan adalah dengan angka indeks. Hasil Penelitian menunjukan bahwa rata-rata kemampuan siswa dalam menata dokumen/arsip dengan angka indeks adalah sebesar 68,85 hal tersebut menunjukkan bahwa siswa umumnya memiliki kemampuan yang sedang, walaupun secara teori pemahaman siswa sudah cukup baik namun secara praktik siswa masih memiliki kekurangan yaitu siswa kurang menguasai dalam praktik mengindeks, memberikan kode penyimpanan, pencatatan kartu pinjam arsip, membaca kode penyimpanan dan prosedur penemuan kembali arsip/dokumen. Siswa juga belum diajarkan praktik penyimpanan sistem wilayah, sistem nomor dan sistem subjek/perihal sehingga kemampuan meraka dalam sistem penyimpanan tersebut masih kurang serta siswa juga belum diajarkan praktik penemuan kembali surat/arsip. Office Administration program is one of the must have skills that are the basis of the competencies document setup. Learning happens in SMK PGRI 2 Salatiga , students in Administrative

  4. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  5. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  6. Tela de polipropileno no reparo laparoscópico de grandes hérnias hiatais: aspectos técnicos The polypropylene mesh in the laparoscopic repair of large hiatal hernias: technical aspects

    Directory of Open Access Journals (Sweden)

    André Brandalise

    2012-12-01

    months. All patients have at least one follow-up endoscopy or esophageal contrast examination, and a clinical interview. In this follow-up period, no cases of complications related to the prosthesis (stenosis or erosion were observed. CONCLUSION: The use of this model of polypropylene mesh is safe if the technical aspects of its placement are followed carefully.

  7. ANALISIS PENERAPAN 8 STANDAR NASIONAL PENDIDIKAN PADA SMP NEGERI 2 DOLOPO KABUPATEN MADIUN

    Directory of Open Access Journals (Sweden)

    Luki Eko Cahyono

    2015-10-01

    Penelitian ini menggunakan desain penelitian Deskriptif Kualitatif. Jenis penelitian adalah studi kasus. Data yang digunakan adalah data Primer. Teknik pengumpulan data yang digunakan adalah wawancara dan dokumentasi. Teknik keabsahan data adalah Triangulasi Sumber dan teknik analisis data yang digunakan adalah pendekatan Strengths, Weakness, Opportunities, dan Threats (Analisis SWOT. Kesimpulan penelitian ini adalah (1 Hasil analisis Strenght (Kekuatan adalah sekolah sudah merencanakan, melaksanakan dan mengevaluasi sebagian besar indikator dalam pemenuhan Standar Nasional Pendidikan sehingga meningkatkan mutu pendidikan sekolah. (2 Hasil analisis Weakness (kelemahan adalah keterbatasan anggaran dana dan sumber daya manusia baik peserta didik, pendidik, maupun tenaga kependidikan dalam pemenuhan seluruh unsur Standar Nasional Pendidikan. (3 Hasil analisis Opportunities (peluang adalah Pemberian workshop dan pelatihan kepada pendidik dan tenaga kependidikan meningkatkan kualitas pendidikan sekolah, dan perencanaan, pelaksanaan pembiayaan serta evaluasi penganggaran yang baik memberikan dampak positif terhadap semua unsur operasional sekolah maupun sarana prasarana sekolah. (4 Hasil analisis Threats (Tantangan adalah perencanaan, sosialisasi, pelaksanaan dan evaluasi serta tindak lanjut yang tidak dijalankan dengan manajemen yang baik dalam upaya pemenuhan Standar Nasional Pendidikan akan menghambat peningkatan kualitas pendidikan sekolah. (5 Hasil penerapan Standar Nasional Pendidikan pada SMP Negeri 2 Dolopo menggunakan analisis SWOT menunjukkan bahwa Kekuatan lebih besar daripada Kelemahan dan Peluang lebih besar dari Ancaman, yang berarti Standar Nasional Pendidikan telah terpenuhi dan menghasilkan Akreditasi Sekolah nilai A.

  8. ANALISIS KINERJA PKPRI PADA ASPEK KERJASAMA ANTAR KPRI DAN PADA ASPEK KEPEDULIAN TERHADAP KOMUNITAS KPRI DI KABUPATEN PEMALANG

    Directory of Open Access Journals (Sweden)

    Wandha Norendra

    2013-02-01

    Full Text Available Analisis kinerja pada� PKPRI masih menggunakan cara lama yaitu hanya menggunakan penilaian keuangan dengan menggunakan analisis rasio keuangan rentabilitas, likuiditas, dan solvabilitas. Bukannya dengan menggunakan pedoman dari kepmen no 129 tahun 2002 yang dikeluarkan oleh menteri koperasi dan UKM. Tujuan dari penelitian ini adalah untuk menganalisis dan mendeskripsikan kinerja pada PKPRI pada aspek kerjasama antar KPRI dan pada aspek kepedulian terhadap komunitas KPRI di Kabupaten Pemalang. Penelitian ini merupakan studi kasus pada PKPRI dan KPRI di Kabupaten Pemalang. Pendekatan penelitian yang akan� digunakan dalam penulisan skripsi ini adalah metode penelitian deskriptif� kuantitatif yaitu apabila datanya telah terkumpul,� kemudian diklasifikasikan menjadi dua kelompok data, yaitu data kuantitatif yang berbentuk angka-angka dan data kualitatif yang menyatakan dalam kata-kata atau simbol-simbol (Suharsimi, 2006: 239. Hasil dalam penelitian ini adalah kerjasama antar KPRI dikategorikan baik, kepedulian terhadap komunitas KPRI juga dikategorikan baik. � Analysis of the performance of the PKPRI still use the old way is just using financial valuation using financial ratio analysis of profitability, liquidity and solvency. Instead of using the guidelines of the Decree No. 129 of 2002 issued by the minister of cooperatives and SMEs. The purpose of this study is to analyze and describe the performance of the PKPRI KPRI aspects of cooperation and concern for the community aspect KPRI in Pemalang. This research is a case study on PKPRI and KPRI in Pemalang. The research approach will be used in writing this thesis is descriptive quantitative research method is if the data has been collected and then classified into two groups of data, the quantitative data in the form of figures and qualitative data are expressed in words or symbols (Suharsimi , 2006: 239. The results of this study are categorized KPRI good cooperation, concern for the

  9. Aspects of the fast reactors fuel cycle

    International Nuclear Information System (INIS)

    Zouain, D.M.

    1982-06-01

    The fuel cycle for fast reactors, is analysed, regarding the technical aspects of the developing of the reprocessing stages and the fuel fabrication. The environmental impact of LMFBRs and the waste management of this cycle are studied. The economic aspects of the fuel cycle, are studied too. Some coments about the Brazilian fast reactors programs are done. (E.G.) [pt

  10. Technical management of difference in CEPR nuclear power project

    International Nuclear Information System (INIS)

    Guo Ruiting

    2014-01-01

    The Thesis dissertate the application of technical management of difference in CEPR Nuclear Power Project from EPR technical bases, condition of a nuclear power plant site, engineering and procurement, construction, quality management, schedule management and experience feedback aspects. (author)

  11. Analisis Hubungan Kepemimpinan dan Kepuasan Kerja terhadap Kinerja Karyawan pada PT Adam Jaya

    OpenAIRE

    Dasaad, Dasaad

    2015-01-01

    The performance of employee at PT Adam Jaya is considered has not been optimal. It needs an improvement through chronically resource development which is, in this case, the employee. The development includes not only technical aspects but also psychological aspects such as leadership and job satisfaction development. Leadership and job satisfaction are interrelated and important in determining the performance of an employee. High leadership will encourage the employee to work in discipline th...

  12. Novel Sepatu Dahlan Karya Krisna Pabichara Analisis Psikologi Sastra dan Nilai Pendidikan

    Directory of Open Access Journals (Sweden)

    Masnu'atul Hawa

    2014-07-01

    Full Text Available Sepatu Dahlan’ Novel by Khrisna Pabichara Analysis of Psychological Literature And Educational Values. This research is qualitative descriptive study using the approach of structuralism and psychological aspects of character with the methods and strategies for qualitative descriptive content analysis. Activities carried out reading, looking at, interpreting, and analyzing the novel Sepatu Dahlan. The results of the activity described in the form of sentences. This study aims to describe and explain (1 narrative structure, (2 the psychology of character, and (3 educational values embodied in the novel Sepatu Dahlan by Khrisna Pabichara. Thus research was descriptive qualitative research with content analisys method. The data or important informations were collected and studied in this research includes words from and the result is written in the document analysis. The technique which was used to collect the data was reading, writing, and analyzing on that novel. The validity data which was used was trianggulasi data, trianggulasi method, and trianggulasi theory: the technique analysis data wich was used in this research was analyzing interactive technique. The result of research on the pychology of the characters in the novel Sepatu Dahlan by Khrisna Pabichara includes: psychological needs, security needs, cherished and loved needs, esteem needs, and actualization. Further more, the educational values are religion, moral, social, economy, and culture. Key words: novel Sepatu Dahlan, psychology literature, educational values.

  13. Analisis Penerimaan PAD Pada Dinas Perikanan dan Peternakan Kabupaten Tebo

    Directory of Open Access Journals (Sweden)

    Eko Purnarianto

    2016-06-01

    Full Text Available Abstract. This study aims to analyze potential, efficiency, effectivity and contribution of PAD admission at Department of Fishery and Animal Husbandry in Tebo Regencyincluding the strategy establishment to increase its revenue.The analysis used is a potential formula, efficiency ratio, effectivity ratio, contributions ratio and SWOT analysis.The results shows that the potential revenue of retribution slaughterhouse (RPH, the potential sales of livestock, and potential sales fishery product are beyond the current target. The efficiency level of retribution slaughterhouse (RPH and sales of fishery product is poor, but the sales of livestock is very efficient. Effectivity level of livestock and fishery product sales are low, whileretribution slaughterhouses(RPH is not effective regarded to its potential  but in the contrary for its target. Contribution of PAD admission of Fishery and Animal Husbandry Department is very low regarded Tebo Regency PAD. The result of SWOT analysis of retribution slaughter house (RPH admission using WO (Weakness-Opportunity strategy, livestock sales using SO (Strength-Oppurtunity strategy, and fishery product sales using ST (strength-threat strategy. Keywords: Retribution SlaughterHouse (RPH, Sales of Fishery, Livestock Sales, SWOT Analysis   Abstrak. Penelitian ini bertujuan untuk menganalisis potensi, efisiensi, efektivitas dan kontribusi penerimaan PAD pada Dinas Perikanan dan Peternakan Kabupaten Teboserta menetapkan strategi untuk peningkatan penerimaan PAD. Analisis yang digunakan adalah rumus potensi, rasio efisiensi, rasio efektivitas, rasio kontribusi dan analisis SWOT.Hasil penelitian menunjukkan bahwa potensi penerimaan retribusi rumah potong hewan (RPH, potensi penjualan hasil peternakan, potensi  penjualan hasil perikanan lebih besar dari target yang telah ditetapkan. Tingkat efisiensi retribusi RPH dan penjualan hasil perikanan tidak efisien, penjualan hasil peternakan sangat efisien. Tingkat

  14. Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

    Directory of Open Access Journals (Sweden)

    Nurul Dzakiya

    2017-05-01

    Full Text Available Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m, lempung pasiran (11-30 m dan lapukan batuan diorit (30-55 m yang berada di kedalaman berbeda. Ketebalan batuan di permukaan sekitar 225-231 meter berdasarkan penampang peta geologi dengan arah sebaran dari Barat Laut hingga Tenggara. Proses pelapukan dan alterasi di daerah ini intensif (alterasi argilik dengan jenis morfologi perbukitan intrusi terdenudasi dan dataran Alluvial.

  15. ANALISIS KEAMANAN DATA PADA BLOCK CIPHER ALGORITMA KRIPTOGRAFI RSA

    Directory of Open Access Journals (Sweden)

    Fadhillah Azmi

    2017-01-01

    Full Text Available Komunikasi adalah proses dasar dari pertukaran informasi. Efektifitas komunikasikomputer secara umum adalah melalui internet atau beberapa saluran komunikasi lainnya.Tujuan utama tulisan ini adalah berdasarkan pada analisis hasil yang diberikan Weinermengatakan bahwa jika private key d digunakan dalam algoritma kriptografi RSA kurang darin292, maka sistem tersebut kurang aman. Di sini penulis menganalisa pada hasil yang diberikanoleh Weiner dan mencoba untuk meningkatkan range dari private key d sampai n0.5. Karena nadalah perkalian p dan q, yang mana bilangan relative prima. Sehingga mempengaruhi kinerjaenkripsi algoritma yang lebih aman.

  16. Analisis Derau dalam Perancangan Rangkaian Terintegrasi Op-Amp

    Directory of Open Access Journals (Sweden)

    Siti Sendari

    2009-02-01

    Full Text Available Perancangan IC Op-Amp, memerlukan spesifikasi-spesifikasi yang meliputi parameter proses dan parameter perancangan. Dalam menentukan parameter perancangan, derau merupakan suatu hal yang tidak bisa ditinggalkan, karena derau dapat menentukan keandalan perancangan. Untuk menganalisis derau pada IC Op-Amp langkah pertama yang harus diketahui adalah sumber-sumber derau, setelah itu dilakukan analisis derau baik secara teoritis maupun secara simulasi untuk mengetahui derau yang mungkin terjadi dalam perancangan IC, apakah sudah sesuai dengan spesifikasi yang ditentukan atau tidak. Untuk simulasi derau dapat dilakukan dengan program Spice.

  17. ADTT safety aspects

    International Nuclear Information System (INIS)

    Thedeen, T.

    1997-01-01

    Beside the technical problems of ADTT which remain to be solved it is crucial for the ADTT progress that safety and economical aspects are considered already during the research and planning phases. Safety here stands for the converse of risk, negative consequences for human life and health and the environment together with the corresponding probabilities. The system to be considered includes all phases of an ADTT plant, a life cycle analysis (LCA). The risk analysis is useful for two purposes: comparison with other ways of handling nuclear waste, e.g. geological repository and for valuation of different construction designs. Due to lack of precise plans and adequate data the analysis will be more of a qualitative than quantitative type. The main risks appear in connection with repair and replacement work. 2 refs., 1 fig

  18. Understanding Socio Technical Modularity

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Kudsk, Anders; Hvam, Lars

    2011-01-01

    Modularity has gained an increasing popularity as a central concept for exploring product structure, process structure, organization structure and supply chain structure. With the offset in system theory the predominant understanding of modularity however faces difficulties in explaining the social...... dimension of modularity like irrational behaviors, cultural differences, learning processes, social organization and institutional influences on modularity. The paper addresses this gab offering a reinterpretation of the modularity concept from a socio-technical perspective in general and Actor Network...... Theory in particular. By formulating modularity from an ANT perspective covering social, material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity. The theoretical framework is illustrated...

  19. Technical Note

    African Journals Online (AJOL)

    Administratör

    In this report on four patients, we did not use any of these techniques. The existence and the site of the fistulas was clearly demonstrated using basic but important preoperative detailed assessment and two intraoperative findings. The preoperative referral note that indicated the site of technical difficulty during the previous ...

  20. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  1. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  2. Technical endoscopy

    International Nuclear Information System (INIS)

    Cavalar, K.O.

    1988-01-01

    A survey is provided on different versions of endoscopes, taking into account the new developments of video endoscopy. With a variety of practical examples it is shown that technical tests using endoscopy are a demanding task for nondestructive testing, whose requirements can only be met on a customized basis. (orig./HP) [de

  3. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  4. Ethical and technical considerations for the creation of cell lines in the head & neck and tissue harvesting for research and drug development (Part II: Ethical aspects of obtaining tissue specimens

    Directory of Open Access Journals (Sweden)

    Upile Tahwinder

    2009-04-01

    Full Text Available Abstract Background Although much has been published for the development of cell lines, these were lab based and developed for scientific technical staff. Objective of review We discuss the ethical implications of tissue retention and present a generic consent form (Part II. We also present a simple and successful protocol for the development of cell lines and tissue harvesting for the clinical scientist (Part I. Conclusion Consent is also more proximate and assurance can be given of appropriate usage. Ethical questions concerning tissue ownership are in many institutions raised during the current consenting procedure. We provide a robust ethical framework, based on the current legislation, which allows clinicians to be directly involved in cell and tissue harvesting.

  5. Technics and ethics

    International Nuclear Information System (INIS)

    Budnick, D.; Gemmel, F.

    1981-01-01

    Questions about the sense of life and the responsibility of technology are ethical questions. Young people in our neighbourhood who, compared to some time ago, see, hear and read much more of the world, deal with them increasingly. However, the permanent stream of information does not at all facilitate orientation but prevents many people from gaining some clearness about their own point of view. In asking the questions: where are we today. How can we get on. How can we start. The relation between ethics and technics is discussed under various aspects. (orig./HSCH) [de

  6. Klasifikasi Kecamatan Berdasarkan Nilai Akhir SMA/MA di Kabupaten Aceh Selatan Menggunakan Analisis Diskriminan

    Directory of Open Access Journals (Sweden)

    Fitriana A.R.

    2015-11-01

    Full Text Available Analisis diskriminan merupakan bagian dari analisis peubah ganda. Analisis diskriminan digunakan untuk memodelkan variabel tak bebas yang bersifat kualitatif dengan variabel bebas yang bersifat kuantitatif. Pada penelitian ini, analisis diskriminan lebih dari dua kelompok diterapkan pada data nilai akhir SMA/MA di Kabupaten Aceh Selatan yang bertujuan untuk mendapatkan model untuk pengklasifikasian kecamatan. Pengklasifikasian ini bertujuan untuk melihat perbedaan kualitas siswa SMA/MA yang berada di masing-masing kecamatan Kabupaten Aceh Selatan berdasarkan data nilai akhir. Variabel tak bebas yang digunakan berupa klasifikasi kecamatan berdasarkan rata-rata jumlah nilai akhir SMA/MA yang berada di masing-masing kecamatan yang dibentuk dengan K-Means Cluster. Sedangkan variabel bebas yang digunakan adalah data rata-rata nilai akhir SMA/MA untuk setiap mata pelajaran yang diujiankan pada masing-masing jurusan setiap kecamatan. Model yang didapatkan adalah dua model diskriminan untuk jurusan IPA dan IPS.

  7. La financial education nella regione Puglia: analisi e prospettive di intervento

    OpenAIRE

    A. Garzoni; V. Nastasi

    2010-01-01

    Analisi del contesto e delle principali tematiche di financial education affrontate a livello internazionale e nazionale, valutazione delle opportunità e degli aspetti critici, il progetto pilota nella regione Puglia e le nuove idee di progetto da realizzare

  8. ANALISIS FINANSIAL DAN KELEMBAGAAN RANTAI NILAI MEBEL MAHONI JEPARA

    Directory of Open Access Journals (Sweden)

    Nunung Parlinah

    2011-12-01

    Full Text Available Industri mebel umumnya termasuk dalam industri kecil dan menengah. Selain berperan dalam penerimaan devisa, bisnis di bidang mebel ini juga menciptakan lapangan kerja bagi masyarakat terutama di Kabupaten Jepara. Adanya hubungan (pemberi kepercayaan - (penerima kepercayaan yang terjadi antar aktor atau pelaku di dalam rantai berpengaruh terhadap besarnya distribusi nilai tambah yang diperoleh oleh masingmasing pelaku di sepanjang rantai nilai Tujuan dari penelitian ini adalah mengidentifikasi kelembagaan (aturan yang terjadi antar pelaku di sepanjang rantai nilai mebel mahoni Jepara dan menentukan skenario kebijakan yang dapat mendukung bagi kelestarian industri mebel Jepara. Data yang digunakan meliputi data primer dan data sekunder. Analisis data meliputi identifikasi aktor dan kelembagaan (aturan yang terjadi antar pelaku serta analisis manfaat biaya yang terdiri dari NVP, BCR dan IRR. Hasil penelitian menunjukkan bahwa (1 para pengrajin ( memproduksi mebelnya lebih didasarkan pada pesanan pembeli ( . agent principal Asymetic information yang terjadi antara pedagang kayu dan petani juga telah mengakibatkan posisi petani sebagai (2 Nilai NPV, BCRdan IRR untuk tiap pelaku berbeda-beda tetapi nilai-nilai tersebut mengindikasikan bahwa pola kemitraan yang terjadi antar pelaku dalam rantai nilai mebel mahoni saat ini sudah efektif. Skenario kebijakan yang dapat diterapkan adalah kebijakan yang bersifat insentif bagi petani hutan rakyat, peningkatan kemampuan pengrajin di bidang pemasaran; dan membangun aksi kolektif diantara pengrajin. price taker;

  9. Analisis Rugi Daya Pada Penyulang Bangli Dengan Beroperasinya PLTS Kayubihi

    Directory of Open Access Journals (Sweden)

    I GN Dion Adiputra

    2015-06-01

    Full Text Available Analisis rugi daya pada Penyulang Bangli dilakukan untuk mengetahui perbanding an rugi daya pada jaringan distribusi setelah penempatan pembangkit tersebar jenis PLTS berkapasitas 1 MWp. Lokasi penempatan PLTS ditentukan berdasarkan analisis sensitivitas bus. Nilai sensitivitas bus(?didapat dengan cara membandingkan nilai rugi daya pada sistem dengan total beban yang terhubung pada bus. Penelitian ini menggunakan simulasi aliran daya dengan metode aliran daya Newton-Raphson. Hasil penelitian menunjukkan bus TK 0041 memiliki sensitivitas terbesar dengan nilai ?= 0,178. Dari hasil simulasi aliran daya, penempatan PLTS 1MWp pada lokasi alternatif 1 menghasilkan rugi daya minimum pada Penyulang Bangli yaitu 103,1 kW atau 3,3% dari total suplai daya 3071 kW. Pemasangan PLTS dapat menurunkan rugi daya pada Penyulang Bangli sebesar 57 kW dari total rugi daya pada kondisi tanpa PLTS yaitu 160,1 kW. Bila dibandingkan dengan kondisi eksisting, penem patan PLTS pada lokasi alternatif 1 memiliki selisih rugi daya 7,3 kW lebih kecil dari total rugi daya yang dihasilkan kondisi eksisting sebesar 110,4kW.

  10. Pembuatan Dan Analisis Exciter Generator Rf Untuk Siklotron Proton Decy-13

    OpenAIRE

    Prajitno, Prajitno

    2011-01-01

    PEMBUATAN DAN ANALISIS EXCITER GENERATOR RF UNTUK SIKLOTRON PROTON DECY-13.Telah dilakukan analisis dan pembuatan exciter generator RF untuk siklotron proton 13MeV. Generator RFakan digunakan sebagai sumber tegangan pemercepat bolak-Balik siklotron DECY-13 rancangan PTAPBBATAN.Berdasarkan dokumen rancangan dasar yang telah dibuat siklotron Decy-13 akan menggunakanmedan magnet 1,275 Tesla, sehingga frekuensi generator RF bila menggunakan harmonik keempat adalah77,667 MHz. Salah satu teknik pem...

  11. ANALISIS HARGA POKOK PRODUKSI DAN PENERAPAN TARGET COSTING PADA UD WAJUKU MAKASSAR

    OpenAIRE

    -, CHAIDIR HAFID

    2017-01-01

    ABSTRAK Analisis Harga Pokok Produksi dan Penerapan Target Costing pada UD Wajuku Makassar The Analysis of The Cost of Goods Manufactured and Implementation of Target Costing in UD Wajuku Makassar Chaidir Hafid Asri Usman Syahrir Penelitian ini bertujuan untuk mengetahui perhitungan harga pokok produksi baju kaos polos sebelum dan setelah penerapan metode target costing pada UD Wajuku Makassar. Metode pengumpulan data yang digunakan adalah dokumentasi. Metode analisis dat...

  12. PENGUKURAN KINERJA PERUSAHAAN PT. HADJI KALLA DENGAN MENGGUNAKAN ANALISIS ECONOMIC VALUE ADDED

    OpenAIRE

    2013-01-01

    Tujuan dari penelitian ini adalah mengetahui kinerja Economic Value Added (EVA) yang dicapai oleh perusahaan PT. Hadji Kalla, sedangkan metode analisis yang digunakan dalam penelitian ini adalah analisis perkembangan Economic Value Added (EVA), Net Operating Profit After Tax (NOPAT) dan The purpose of this study was to determine the performance of the Economic Value Added (EVA), which is achieved by the company PT. Hadji Kalla...

  13. ANALISIS MODEL PREDIKSI AWAL MUSIM HUJAN DI SULAWESI SELATAN

    Directory of Open Access Journals (Sweden)

    Alimatul Rahim

    2016-03-01

    Full Text Available Model prediksi awal musim hujan merupakan salah satu kunci yang dapat digunakan untuk mengurangi resiko kegagalan panen padi yang disebabkan oleh faktor iklim di provinsi Sulawesi Selatan. Model prediksi awal musim hujan dibangun  dengan menggunakan data curah hujan observasi Sulawesi Selatan dan anomali suhu muka laut di kawasan Pasifik dan perairan Sulawesi. Pada studi ini dilakukan analisis pemilihan stasiun hujan observasi, penentuan awal musim hujan, analisis komponen utama dan pengelompokan, analisis korelasi awal musim hujan terhadap anomali suhu muka laut, pembangunan model untuk prediksi awal musimhujan dan verifikasi model.Hasil analisis awal musim hujan menunjukkan setiap stasiun hujan mempunyai perbedaan awal musim hujan dengan rata-rata jatuh pada Julian Date (JD ke-348 (14 Desember. Berdasarkan hasil analisis PCA dan cluster, diperoleh bahwa di Sulawesi Selatan terbagi menjadi 3 cluster wilayah. Cluster 1 mempunyai pola hujan lokal, sedangkan cluster 2 dan 3 mempunyai pola hujan monsun. Pada peta korelasi antara awal musim hujan di Sulawesi Selatan dan anomali suhu muka laut menunjukkan bahwa terdapat korelasi nyata(r≥0.5 antara kawasan Pasifik dan Laut Sulawesi pada cluster 1 dan 2 pada bulan Juni Juli Agustus September(JJAS. Sedangkan pada cluster 3, korelasi nyata hanya pada bulan Juni di perairan Sulawesi. Model prediksi AMH terbaik, pada cluster 2 terdapat di domain prediktor kawasan pasifik dengan nilai r=0.82, sedangkan pada cluster 1 dan 3, terdapat di domain perairan Sulawesi dengan nilai r=0.78 dan r-0.48. Verifikasi model terpilih pada cluster 3 mempunyai RMSE = 3, sedangkan cluster 1 dan 2, nilai RMSE berturut-turut sebesar 16 dan 29.   Model prediction of rainy season onset is one of the keys to reduce the risk of paddy haverst failure because of climate factor in South Sulawesi province. The model prediction for rainy season onset was build using rainfall data in South Sulawesi and SST anomaly in Pacific Ocean and

  14. Momentum in Transformation of Technical Infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Elle, Morten

    1999-01-01

    Current infrastructure holds a considerable momentum and this momentum is a barrier of transformation towards more sustainable technologies and more sustainable styles of network management. Using the sewage sector in Denmark as an example of a technical infrastructure system this paper argues...... that there are technical, economical and social aspects of the current infrastructures momentum....

  15. FOREX trading strategy formation using technical analysis

    OpenAIRE

    Klimavičius, Domas

    2010-01-01

    FOREX technical analysis indicators, their characteristics and capabilities are researched in this final master thesis. The main goal of this thesis is to determine if technical analysis indicators can recognise patterns in price movements and if they can predict future price movement. The first part of the thesis presents with FOREX theoretical aspects, its characteristics and participants. In the second part of the thesis FOREX analysis tools are overviewed, focusing on technical analysis. ...

  16. The hydrogen resource. Productive, technical and economic analysis; La risorsa idrogeno: analisi produttiva tecnica ed economica

    Energy Technology Data Exchange (ETDEWEB)

    De Fronzo, G. [Lecce Univ., Lecce (Italy). Dipt. di Scienze Economiche, Matematico-Statistiche, Economici-Aziendali

    2000-02-01

    Diffusion of hydrogen as an energetic vector meets with a lot of obstacles that don't depend on available raw material, but on hydrogen combination with other elements. It is necessary, therefore, to separate hydrogen picking out the available different technologies to have different pure hydrogen of variable quantities. Besides, its diffusion as fuel is limited because of the great production cost compared to fuels sprung from petroleum. Hydrogen used on a large scale could have advantages on the environment and occupation, but there are economic and politic obstacles to limit its diffusion. Future of economic system, based on hydrogen as the main energetic vector, will depend on the programme that national and international qualified governing bodies will be able to do. [Italian] L'articolo analizza l'uso dell'idrogeno come risorsa dal punto di vista tecnico ed economico. Si discute la relazione con i programmi che governi nazionali sapranno mettere in campo per il suo sfruttamento.

  17. Membandingkan Tingkat Kemiripan Rekaman Voice Changer Menggunakan Analisis Pitch, Formant dan Spectogram

    Directory of Open Access Journals (Sweden)

    Ahmad Subki

    2018-02-01

    Full Text Available Audio forensik merupakan salah satu ilmu yang mnyandingkan antara ilmu pengetahuan dan metode ilmiah dalam proses analisis rekaman suara untuk membantu dan mendukung pengungkapan suatu tindak kejahatan yang diperlukan dalam proses persidangan. Undang-undang ITE No.19 Tahun 2016 menyebutkan bahwa rekaman suara merupakan salah satu alat bukti digital yang sah dan dapat digunakan sebagai penguat dakwaan. Rekaman suara yang merupakan barang bukti digital sangatlah mudah dan rentan dimanipulasi, baik secara sengaja maupun tidak disengaja. Pada penelitian ini dilakukan analisis terkait tingkat kemiripan antara rekaman suara voice changer dengan rekaman suara asli menggunakan analisis pitch, formant dan spectogram, rekaman suara yang dianalisis ada dua jenis rekaman suara yaitu suara laki-laki dan suara perempuan. Rekaman suara voice changer  dan rekaman suara asli, diekstrak menggunakan tools praat kemudian informasi yang diperoleh dianalisis dengan analisis statistik pitch, formant dan spectrogrammenggunakan tools gnumeric. Penelitian ini menghasilkan bahwa analisis rekaman suara voice changer dengan rekaman suara asli dapat menggunakan analisis statistik pitch, formant dan spectrogram, rekaman suara voice changer A memiliki tingkat kemiripan yang paling tinggi dengan rekaman suara asli pada posisi low pitch, sedangkan voice changer yang lain lebih sulit untuk diidentifikasi.

  18. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  19. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  20. ANALISIS DISKRIMINAN UNTUK MENENTUKAN INDIKATOR GARIS KEMISKINAN

    Directory of Open Access Journals (Sweden)

    Dadang Sukandar

    2012-03-01

    Full Text Available 800x600 Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 The objectives of this study are to: 1 determine poverty line gold standard of farmers, 2 compare the gold standard with existing poverty line i.e. Sajogyo, Central Bureau of Statistics, BKKBN, World Bank US $ 1 and World Bank US $ 2, and 3 derive poverty indicators. This research was conducted in Subang, West Java. As many as 522 farmer households were collected as sample through stratified random sampling with proportional allocation. Data collected include socio-economic, income, expenditure, food consumption, health, anthropometry, agriculture aspects and living cost component and their prices. The Gold Standard was obtained through distribution standard normal while poverty indicator was derived through discriminant analysis. The results show that the poverty line gold standard of farmer is Rp. 457,558/capita/month which is equivalent to 2.29 gram of gold/capita/month. Discriminant analysis give five indicators of poverty namely, number of households member, husband education level, nutritional status of children, frequency of egg consumption, and land size manage by farmers. Keywords: farmer, poverty, gold standard, discriminant analysis, indicator

  1. Analisis Asosiasi Kultural atas Warna: Sumatera I

    Directory of Open Access Journals (Sweden)

    Mita Purbasari

    2014-10-01

    Full Text Available Analysis cultural association of color is an approach to know color from cultural side. Unlike previous studies about color, which see the color from the aspect of psychology, then this color research’s aimed to provide insight local colors based on culture. Johannes Itten’s theory of color is used as the basis theory in this research. The theory will be reflected into the cultures of Indonesia, and in this research represented by Sumatera Island. The scope of cultural colors that will be examined is textile product of traditional clothes, bride, apparel and culinary, because these products are the most closely reflection of a culture in a society where the society defines the identity of its own. This research of a qualitative method covers collecting data of study literature, interviewing the color experts, historians and artists, visiting cultural centers especially that associated with textil and culinary product. The result will be formed of morphological matrix cultural over color. Matrix of analysis will be held in arquement and proposal study, where students can use, cultivate, and maximize method of color in visual communication to achieve the contrast and balance.

  2. Territorio e analisi statistico-economica

    Directory of Open Access Journals (Sweden)

    Alighiero Erba

    2007-10-01

    Full Text Available A careful study of national income must necessarily address the issue of localization of economic activities in each country. This aspect has been a primary focus since the first scholars of quantitative economics - the Political Arithmeticians - in setting the background for measuring income, paid large emphasis on the localization of firms. With the evolution of research and knowledge on how income is generated, distributed and used, a larger and larger set of evidence has been produced on per-capita income differences across and within countries. The awareness of the degree of income variability within a country has fostered the investigations aimed at identifying what can be defined as the "areas for the study of the circular flow of income". As a consequence, the scholars of economic statistics happened to conduct their research in a field where scholars of other disciplines were already contributing: it is the case of labor economists and/or economic geographers. Hence, in the last part of this essay, we compare the different approaches to analyzing the economic characterization of the territory taken by: a scholars of the circular flow of income, b scholars of local labor markets and c scholars of firms' localization.

  3. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  4. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  5. INDOT Technical Training Plan : [Technical Summary

    Science.gov (United States)

    2012-01-01

    A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

  6. ANALISIS KELAYAKAN FINANSIAL WISATA AIR WADUK JATIGEDE KABUPATEN SUMEDANG

    Directory of Open Access Journals (Sweden)

    Bambang Susanto

    2016-04-01

    pendahuluan agar manfaatnya jauh lebih besar dari biaya yang dikeluarkan. Oleh sebab itu untuk kepentingan ilmiah perlu dilakukan kajian akademisnya berupa Analisis kelayakan Finansial. Berdasarkan analisis kelayakan keuangan   ,dapat  disimpulkan bahwa wisata air di Waduk jatigede Kabupaten Sumedang  memberikan manfaat yang lebih dibandingkan dengan biaya yang dikeluarkan . ini dapat dilihat dari hasil analisis net present value yang positif, internal rate of return yang lebih besar dari tingkat bunga bank serta benefit cost yang lebih besar dari satu. Kata Kunci: Kelayakan Finansial; Wisata Air.

  7. ANALISIS RELEVANSI LULUSAN PERGURUAN TINGGI DENGAN DUNIA KERJA

    Directory of Open Access Journals (Sweden)

    Ali Muhson

    2012-04-01

    Full Text Available Abstract: A Relevance Analysis of University Graduates with World of Work. Education should be oriented to the competencies required by the workforce as a percentage of unemployment among the educated increase continuously. This study aims to examine the relevance of YSU Economic Education graduates. The study only focuses on the type of work and subjects taught. The subject of this study is the alumni of Economic Education Study Program. Sampling technique used is snowball sampling. Data collection technique using questionnaires and documentation while the technique of data analysis using descriptive analysis. The result suggests that the majority of the graduates find their first job as private a teacher, a private employee and a tutor, while current job of the most graduates are private teacher, private employee, and civil servant (teacher. The data shows that more than 50 percent of the graduates work in the education area. This implies that the relevance level based on the type of work is categorized as sufficient. Majority of the graduates teaches social science, economic, and entrepreneurship, hence it can be concluded that the relevance level based on the subjects taught is highly relevant.   Keyword: relevance of graduates, type of work, unemployment, employment     Abstrak: Analisis Relevansi Lulusan Perguruan Tinggi dengan Dunia Kerja. Pendidikan harus berorientasi pada kompetensi yang dibutuhkan oleh dunia kerja karena persentase penganggur di kalangan terdidik terus meningkat. Penelitian ini bertujuan untuk mengkaji tingkat relevansi (kesesuaian lulusan Pendidikan Ekonomi UNY. Kajian hanya diarahkan pada jenis pekerjaan dan mata pelajaran yang diampu. Penelitian ini mengambil subjek alumni Prodi Pendidikan Ekonomi dari berbagai angkatan. Teknik sampling yang digunakan adalah snowball sampling. Teknik pengumpulan data menggunakan angket dan dokumentasi sedangkan teknik analisis data menggunakan analisis deskriptif. Penelitian ini

  8. Teleradiology - practical aspects and lessons learnt

    International Nuclear Information System (INIS)

    Buxton, Peter J.

    1999-01-01

    Teleradiology is the most widely practised form of tele medicine and the necessary equipment is readily available. The limiting technical factor is often the communication links between the two sites. A balance must be struck between the degree of image compression and the transmission time. Non technical issues such as organisation of staff and medico-legal aspects must also be considered. Many problems can be avoided by written protocols and agreements

  9. Analisis kesesuaian dan daya dukung ekowisata bahari Pulau Sebesi, Provinsi Lampung

    Directory of Open Access Journals (Sweden)

    Yar Johan

    2015-05-01

    Full Text Available Abstract. The Sebesi Island has coral reefs, mangrove and seagrass ecosystems, and therefore this island has the potenticy to be developed as a tourism destination object. The objectives of the present study were to analysis the suitability and carrying of Sebesi Island for for marine ecotourism activities of diving and snorkeling. The primary data were collected through field sampling, direct observation of field conditions, questionnaires and interviews. The secondary data were collected from previous studies, journals, technical reports and related agencies. The results showed that the Sebesi Island was suitable for diving and snorkeling activities  (S2 category with the carrying capacity for diving and snorkeling activities were 2,394 person/day and 2,489 person/day, respectively. Keywords: coral reef, marine ecotourism, suitability, carrying capacity, Sebesi Island   Abstrak. Pulau Sebesi berpotensi untuk dikembangkan menjadi salah satu Objek Daerah Tujuan Wisata (ODTW. Ekosistem Pulau Sebesi sebagian besar merupakan ekosistem terumbu karang, mangrove dan lamun. Penelitian tentang analisis kesesuaian dan daya dukung ekowisata bahari Pulau Sebesi Provinsi Lampung bertujuan mengkaji kesesuaian kawasan Pulau Sebesi untuk kegiatan ekowisata bahari yaitu diving dan snorkeling dan menganalisis daya dukung (carryng capacity kawasan Pulau Sebesi. Pengumpulan data primer dilakukan melalui sampling, observasi langsung di lapangan, kuisioner, wawancara terbuka/langsung dan wawancara mendalam  di lokasi penelitian. Data sekunder dikumpulkan dengan penelusuran berbagai pustaka, dan instansi terkait. Hasil penelitian menunjukkan bahwa jenis kegiatan ekowisata bahari diving dan snorkling termasuk dalam kategori sesuai (S2, dengan daya dukung kawasan 2.394/hari orang untuk diving dan 2.489 orang/hari untuk snorkling. Kata kunci: terumbu karang, ekowisata bahari, kesesuaian, daya dukung, Pulau Sebesi

  10. TECHNICAL COORDINATION

    CERN Document Server

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  11. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  12. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  13. Energy sustainable communities - social and psychological aspects

    International Nuclear Information System (INIS)

    Schweizer-Ries, P.; Baasch, St.; Jagszent, J.

    2004-01-01

    Besides technical, political and economic aspects of energy sustainability there are several social, behavioural and psychological dimensions of vital importance for a successful implementation of Renewable Energy Systems (RES) and Rational Use of Energy (RUE) within communities. The European Project ''Sustainable Communities-on the energy dimension'' pursues an interdisciplinary approach to detect essential success and facilitating factors. In the last years social and psychological aspects in the process of sustainability came to the fore more and more. Not only as a complementary science to facilitate the technical aims in the change process but also as an essential part for success. (authors)

  14. ANALISIS LEMBAR KERJA SISWA DALAM MENINGKATKAN KOMUNIKASI MATEMATIS TULIS SISWA

    Directory of Open Access Journals (Sweden)

    Fimmatur Rizka Ardina

    2016-02-01

    Komunikasi merupakan suatu kemampuan yang penting untuk dimiliki setiap manusia. Komunikasi dalam artikel ini difokuskan pada komunikasi matematis tulis. Komunikasi matematis tulis ini akan berhubungan dengan lembar kerja siswa yang dipakai dalam proses pembelajaran. Tujuan penulisan artikel ini adalah untuk mendeskripsikan proses analisis LKS sebagai alat untuk meningkatkan komunikasi matematis tulis siswa. Jenis penelitian yang digunakan adalah kualitatif deskriptif. LKS akan dianalisis menggunakan standar indikator kemampuan komunikasi NCTM (2000 yang dimodifikasi sehingga terdapat empat indikator yaitu (1 siswa dapat menuliskan ide yang dimiliki dengan jelas dan tepat (2 siswa dapat menuliskan alasan untuk jawaban yang diberikan (3 siswa dapat memberikan tanggapan untuk ide atau jawaban siswa lain (4 siswa dapat menuliskan kembali ide orang lain menggunakan bahasanya sendiri. Berdasarkan hasil penelitian dapat disimpulkan bahwa LKS oleh Tim MGMP Kota Malang tidak dapat digunakan sebagai alternatif untuk meningkatkan kemmapuan komunikasi matematis tulis siswa.

  15. Analisis Implementasi Akuntansi Berbasis Akrual pada Inspektorat Jenderal Kementerian Keuangan

    Directory of Open Access Journals (Sweden)

    Eliada Herwiyanti

    2017-05-01

    Full Text Available Penelitian ini merupakan penelitian kualitatif terhadap penerapan Sistem Akuntansi Pemerintahan berbasis akrual di lingkungan Inspektorat Jenderal Kementerian Keuangan. Tujuan dari penelitian ini adalah untuk mengetahui bagaimana kesiapan dan penerapan SAP Berbasis Akrual di instansi tersebut. Data dalam penelitian ini dikumpulkan melalui observasi, studi kepustakaan, serta wawancara terhadap sepuluh orang informan yang terkait langsung dengan penerapan SAP berbasis akrual. Data yang telah dikumpulkan kemudian dianalisis dan diinterpretasikan secara naratif dengan menggunakan metode analisis data kualitatif yang direkomendasikan oleh Creswell (2012. Hasil penelitian ini menunjukkan bahwa secara umum, kesiapan Itjen Kemenkeu dalam menerapkan sistem akuntansi akrual sudah baik, mulai dari aspek komunikasi, sumber daya, komitmen organisasi, dan struktur birokrasi. Dengan kesiapan yang baik, penelitian ini juga menun­juk­kan bahwa penerapan sistem akuntansi akrual di Itjen Kemenkeu sudah dilakukan dengan sangat memuaskan, yang ditunjukkan dengan nilai sebesar 93,40%.

  16. ANALISIS PERANCANGAN BUSINESS INTELLIGENCE BERBASIS SAAS CLOUD COMPUTING

    Directory of Open Access Journals (Sweden)

    I Gede Adnyana

    2014-05-01

    Full Text Available Persaingan bisnis yang ketat, mendorong setiap perusahaan menyusun strategi bisnis agar dapat bertahan dari para pesaing. Penyusunan strategi bisnis mutlak memerlukan informasi yang tepat dan akurat, pengolahan hingga analisis data yang menghasilkan informasi yang tepat dan akurat menjadi proses yang sangat penting. Business Intelligence (BI menawarkan solusi bisnis untuk menganalisis data dan memungkinkan suatu perusahaan untuk mengambil keputusan untuk meningkatkan keuntungan dan kinerja bisnis. Namun, BI mahal untuk diimplementasikan, memerlukan biaya pemeliharaan yang tidak sedikit dan infrastruktur yang kuat. Hal ini mendorong perusahaan mengurangi biaya tetapi masih memiliki teknologi yang tepat untuk memungkinkan mereka untuk membuat keputusan, mengidentifikasi peluang dan proaktif mengidentifikasi risiko yang dapat mempengaruhi bisnis. Konsep Software as a Service (SaaS Cloud Computing dapat menjawab tantangan yang dihadapi BI. Sebelum merancang BI berbasis SaaS perlu diketahui parameter-parameter evaluasi hingga kelebihan dan kekurangannya.

  17. Analisis Kekuatan Struktur Pallet Menggunakan Metode Elemen Hingga

    Directory of Open Access Journals (Sweden)

    Tria Mariz Arief

    2015-07-01

    Full Text Available Pallet sebagai suatu alat bantu untuk mempermudah proses bongkar-muat logistik. Palletdigunakan hampir dalam berbagai lingkungan transportasi logistik. Pada bahasan berikutdikhususkan dalam lingkup transportasi di dalam pesawat udara khususnya pada pesawatangkut militer. Di lingkungan militer pallet digunakan untuk transport logistik baik secara normalmuat (loading dan bongkar (unloading maupun kondisi bongkar dengan diterjunkan daripesawat udara. Untuk pemenuhan penggunaan tersebut dilakukan perancangan ulang (reverseengineering struktur pallet yang dapat dimanufaktur secara lokal. Hipotesis awal menunjukkanbahwa berdasarkan kondisi pembebanan pada pallet dapat diperkirakan bahwa kondisitegangan dan regangan maksimum akan terjadi pada posisi sudut struktur pallet yang ditransferbebannya ke komponen plat besi penahan siku-siku dan baut. Material yang digunakan padastruktur pallet adalah Allumunium Alloy 7075-T6 dengan kekuatan tarik sebesar 503 MPa.Analisis dilakukan dengan menggunakan simulasi numerik dengan metoda elemen hingga(FEM. Proses simulasi numerik kekuatan struktur pallet difokuskan pada pembebanan statis(termasuk pengaruh factor G dalam interval beban statis 4 ton sampai 7 ton. Analisis dilakukanpada perubahan variabel tegangan dan regangan terhadap variasi beban yang diberikan untukmendapatkan tingkat keamanan struktur (margin safety. Pemodelan dilakukan denganidealisasi model ¼ bagian menggunakan elemen terstruktur dengan jenis elemen hexahedral(brick dengan jumlah 73803 elemen dan 360323 node. Hasil analisis menunjukkan teganganekuivalen maksimum struktur Pallet adalah 94 MPa yang terjadi di penguat sudut (anglebracket. Sedangkan pada struktur penguat lapis (sandwich structure berbahan thick blockyang mempunyai kekuatan sebesar 20 MPa adalah sebesar 0.84 MPa. Tingkat keamanansecara keseluruhan struktur dengan mempertimbangkan factor G hingga 2 adalah 5.3.Kata kunci: Analisis struktur, pallet, logistik, reverse engineering, FEM

  18. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI INDEPENDENSI PENAMPILAN AKUNTAN PUBLIK

    Directory of Open Access Journals (Sweden)

    Ardiani Ika S.

    2012-03-01

    Full Text Available Tujuan dari penelitian ini adalah untuk menguji secara empiris faktor-faktor yang mempengaruhi independensi penampilan akuntan publik baik secara parsial dan simultan. Faktor-faktor tersebut adalah financial interests, hubungan bisnis dengan klien, pelayanan asuransi dan audit, hubungan antara klien atau yg diaudit dengan auditor, kompetisi antara Kantor Akuntan Publik (KAP, ukuran KAP dan audit fee. Populasi dalam penelitian ini adalah para auditor di akuntan publik di Semarang tahun 2009. Metode penyeleksian sampel yang digunakan adalah convenience sampling dan jumlah respondennya 35. Alat analisis yang digunakan adalah multiple regression analysis. Dimulai dengan analisis kuantitatif untuk mengetes validitas dan reabilitas. Kemudian dilanjutkan uji asumsi klasik termasuk normality, multicollinearity, and heteroscedastisity. Hasil menunjukkan bahwa 6 variabel yang sudah dikaji secara simultan dan partial tersebut mempunyai efek yang signifikan terhadap independensi penampilan akuntan publik dengan R square 0.749. The objective of this study is to test empirically the factors that influence the independence of public accountant appearance both partially and simultaneously. The factors cover financial interests, business relationships with clients, assurance services and audit services, the length of relationship between client or auditee and auditor, the competition between Public Accountan Offices (KAPs, the size of KAP, and audit fee. The population in this study was the auditors who worked in the public accountant’s office in Semarang in 2009. The sample selection method is a convenience sampling and the  number of  respondents are 35. The Analysis tools used is multiple regression analysis. It starts by applying quantitative analysis to test the validity and reliability. Then, it is continued by testing the classical assumptions which include normality, multicollinearity, and heteroscedastisity. The result shows that the six

  19. ENCAPAI SUMBER DAYA MANUSIA UNGGUL (ANALISIS KINERJA DAN KUALITAS PELAYANAN

    Directory of Open Access Journals (Sweden)

    Ketut Sudarma

    2012-03-01

    Full Text Available Penelitian ini  bertujuan untuk menganalisis pengaruh kemampuan individu, kepuasan kerja, komitmen organisasi terhadap kinerja dan kinerja terhadap kualitas pelayanan. Sampel penelitian berjumlah 76 orang. Teknik pengambilan sampel menggunakan proportional random sampling. Variabel penelitian terdiri dari kemampuan individu, kepuasan kerja, komitmen organisasi, dan kinerja serta kualitas pelayanan  Analisis data menggunakan regresi dua tahap. Hasil penelitian menunjukkan bahwa kemampuan individu, kepuasan kerja dan komitmen organisasi mempunyai pengaruh positif signifikan terhadap kinerja dan kinerja berpengaruh positif signifikan terhadap kualitas pelayanan. Ini berarti semakin meningkat kinerja, maka semakin meningkat juga kualitas pelayanan. Dari hasil analisis deskriptif persentase tampak secara rata-rata  semua variabel penelitian  menunjukkan kategori baik, namun pada aspek-aspek tertentu pada masing-masing variabel masih terdapat kekurangan. Hasil penelitian ini diharapkan dapat menjadi masukan bagi pimpinan dalam meningkatkan kinerja dan kualitas pelayanan. Upaya perbaikan dimulai dari peningkatan kemampuan melalui pendidikan dan latihan, monitoring pelaksanaan kerja secara rutin, menumbuhkan komitmen kerja dan perbaikan standar operasi prosedur.The aim of the study is toanalyze the influence of individual abilities, job satisfaction, organizational commitment to performanceand performance againstservice quality. This samplingmethod is using 76 samples by the proportionalrandom sampling techniques. Variables consisted of individual ability, job satisfaction, organizational commitment, and performance andservice qualitydata analysisusingtwo-stageregression. The results showedthat theability of individuals, job satisfaction and organizational commitment had asignificant positive effecton performance and the performance ofa significant positive effecton quality of service. It means the higher performance, the higher service

  20. Il difficile cammino dell’analisi musicale in Italia

    Directory of Open Access Journals (Sweden)

    Claudio Annibaldi

    2014-10-01

    Full Text Available Si immaginino gli atti d’un convegno sull’analisi musicale che abbia avuto luogo in un paese come la Francia, la Germania, l’ Inghilterra o gli Stati Uniti. Potrebbe mai accadere che essi vengano pubblicati sostituendo il discorso ufficiale d’apertura dei lavori con un testo tutto nuovo epperò simulante d’esser quello effettivamente pronunciato dall’autore? E potrebbe mai accadere - essendo costui un noto critico musicale e il direttore della collana editoriale comprendente gli atti in questione - che questo nuovo testo sia da lui dedicato a uno sfoggio della propria competenza analitica capace solo di esibire una visione dilettantesca della tecnica musicale tout court? Penso proprio di no. Eppure questo è accaduto in Italia non molti anni fa, quando le Edizioni Unicopli pubblicarono, nella collana dei "Quaderni di Musica/Realtà", gli atti di un convegno sull’analisi musicale tenuto nel 1989 a Reggio Emilia: il primo del genere negli annali della musicologia italiana. L’episodio rende bene l’idea dei pericoli incombenti sul cammino di quegli studiosi che, a far data dal convegno suddetto, si sono adoperati a che la pratica analitica acquisisse anche da noi la dignità scientifica di cui gode, appunto, in paesi come la Francia, la Germania, l’Inghilterra o gli Stati Uniti. Quei pericoli si chiamano ‘dilettantismo tecnico’, ‘arroganza intellettuale’, ‘ vezzo d’ imporre l’uno e l’altra grazie a un qualche tipo di potere personale’, ‘necessità di subire tale imposizione in cambio di qualche vantaggio pratico’.

  1. ANALISIS KENDALA POTENSIAL PENERAPAN TOTAL QUALITY MANAGEMENT HOTEL PLAZA SEMARANG

    Directory of Open Access Journals (Sweden)

    Hendrajaya -

    2010-03-01

    Full Text Available Penelitian ini bertujuan untuk menemukan faktor-faktor yang terbentuk dari kendala penerapan Total Quality Management (TQM, sebagai upaya untuk menganalisis masalah-masalah potensial dari penerapan TQM di Hotel Plaza, Semarang. Sampel dari penelitian ini sejumlah 65 karyawan Hotel Plaza, Semarang yang terdiri dari manajer dan staf. Teknik analisis menggunakan Faktor Analisis. Hasil penelitian menunjukkan, bahwa kendala potensial dari implementasi TQM dapat disimpulkan menjadi lima faktor, yaitu faktor inkonsistensi, visi-misi, transformasi budaya, manajerial dan manajemen kualitas. Penelitian ini memberikan rekomendasi bahwa peningkatan fungsi-fungsi korporat melalui optimalisasi kualitas sebagai strategi bisnis dan orientasi pada kepuasan konsumen dengan melibatkan seluruh anggota organisasi, akan menjadi dasar untuk memaksimalkan daya saing perusahaan dalam hal produk, layanan, SDM, lingkungan dan seluruh proses yang dapat mendukung upaya perbaikan produktivitas. This study aims to determine the constraint factors and to analyze the potential problems of TQM implementation of Plaza Semarang Hotel. The sample of 65 employees of TQM implementation of Plaza Semarang Hotel, consist of managers and staffs. Factor analysis is used to achieve the results of the potential constraint implementation of Total Quality Management which can be summarized into five factors, they are: the factor of inconsistencies, the factor of vision and mission, cultural transformation factors, managerial factors and the factors of quality management. In order to increase the corporate functions through the optimization of quality as a business strategy and to achieve customer satisfaction, this study suggests that all members of the organization should be involved by the company as on-going basis to maximize the competitiveness of the organization on products, services, human resources, environment and all processes that support productivity improvement.

  2. Perumusan Strategi Bersaing pada Perusahaan Ban dengan Metode Analisis Portofolio Produk (Studi Kasus: PT Multistrada Arah Sarana, Tbk

    Directory of Open Access Journals (Sweden)

    Nathanael August Zefanya

    2017-01-01

    Full Text Available Industri ban di Indonesia mengalami perkembangan pesat dalam kurun waktu 10 tahun terakhir. Namun, terjadinya krisis ekonomi global menjadi penyebab menurunnya pendapatan, salah satunya adalah PT MASA dengan produk utamanya yaitu ban mobil Achilles dan ban motor Corsa yang digunakan sebagai objek penelitian ini. Telah diilakukan analisis PESTEL dan Porter’s Five Forces, identifikasi faktor lingkungan internal dan eksternal dengan analisis SWOT serta merumuskan alternatif strategi bersaing untuk direkomendasikan kepada PT MASA. Perumusan strategi alternatif didapat dari hasil analisis Matriks BCG dan Matriks IE sebagai analisis portofolio untuk mendapatkan tema strategi alternatif dalam pembuatan Matriks SWOT. Strategi alternatif kemudian diperingkatkan dengan QSPM dan dilanjutkan pembuatan rencana aksi bagi PT MASA dalam waktu 5 tahun ke depan. Setelah dilakukan analisis industri, diketahui bahwa ancaman terbesar datang dari pesaing produsen ban. Dari hasil analisis portofolio, PT MASA berada di kuadran I karena memiliki koordinat IFE serta EFE 3,32 dan 3,26. Dari hasil analisis Matriks IE, PT MASA direkomendasikan untuk melakukan strategi grow and build. Hasil Matriks BCG menunjukkan bahwa Achilles berada di dogs, sementara Corsa berada di question marks. Terdapat 13 strategi alternatif hasil dari formulasi strategi dengan menggunakan matriks TOWS. Dari hasil analisis QSPM, terdapat 7 alternatif strategi terbaik dan rencana aksi..

  3. The Roles of Technical Communication Researchers in Design Scholarship

    Science.gov (United States)

    Sánchez, Fernando

    2017-01-01

    Design has come to be understood as an essential aspect of the work that technical communicators claim. As a result, research in the field of technical communication has approached studies of design in numerous ways. This article showcases how technical communication researchers assume the roles of observers, testers, critics, creators, and…

  4. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  5. Technical presentation

    CERN Document Server

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  6. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  7. Technical presentation

    CERN Document Server

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  8. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  9. AspectKE*

    DEFF Research Database (Denmark)

    Yang, Fan; Masuhara, Hidehiko; Aotani, Tomoyuki

    2010-01-01

    Enforcing security policies to distributed systems is difficult, in particular, when a system contains untrusted components. We designed AspectKE*, a distributed AOP language based on a tuple space, to tackle this issue. In AspectKE*, aspects can enforce access control policies that depend......KE*, and demonstrate usefulness of AspectKE* through a security aspect for a distributed chat system....

  10. ANALISIS SUDUT PANDANG KAMERA (Studi kasus: Film Jelangkung dan Film The Ring 1

    Directory of Open Access Journals (Sweden)

    Listia Natadjaja

    2005-01-01

    Full Text Available Horror movie is one of the strengths of Indonesian film industry; however it is not so popular in the International market. Thus%2C an analysis is needed to determine what the strengths are of another horror movie that has achieved global recognition. This analysis trie s to examine film angles that could be one of the important factors in audio visual in creating horror movies. The Ring 1 is chosen as a comparison to Indonesian horror movie. The Ring 1 has the most world recognition%2C and it has been re-made by Korean and American horror movie makers. Jelangkung is chosen because it is the pioneer of horror movies in Indonesia and has inspired other movies in the same genre. Both films are analyzed from the camera angle aspect which gives the horror effect. Abstract in Bahasa Indonesia : Film horor merupakan salah satu kekuatan perfilman layar lebar di Indonesia.%2C akan tetapi film horor Indonesia kurang dapat menyebar di pasaran Internasional. Oleh karena itu%2C suatu analisis diperlukan untuk mengetahui apakah kekuatan-kekuatan yang dimiliki oleh film horor negara-negara lain yang banyak digemari masyarakat global terutama dari sudut pandang kamera yang merupakan salah satu faktor penting dalam menciptakan kesan horor pada suatu film. Film The Ring 1 dipilih sebagai pedoman perbandingan film horor Indonesia%2C karena film The Ring 1 adalah film horor yang sangat banyak diminati oleh masyarakat di seluruh dunia%2C bahkan telah diremake oleh Korea dan USA. Film Horor Indonesia yang dipilih adalah film Jelangkung yang pertama kali muncul pada film layar lebar dan menjadi cikal bakal munculnya banyak film layar lebar di Indonesia dengan genre yang sama. Analisa kedua film ini ditinjau dari sudut pandang kamera yang dapat menampilkan kesan horor. horror movie%2C camera angle%2C Indonesia%2C Japan.

  11. I “Quaderni ucraini” di Igort. Analisi linguistica di un reportage a fumetti

    Directory of Open Access Journals (Sweden)

    Valerio Monti

    2013-07-01

    Full Text Available L’articolo prende in considerazione i Quaderni ucraini, memorie dai tempi dell’URSS di Igor Tuveri, in arte noto con lo pseudonimo di Igort. L’opera si presenta come reportage a fumetti, nel quale l’autore racconta la sua esperienza nei territori dell’ex-Unione Sovietica. Il primo capitolo presenta il genere del graphic journalism, la sua diffusione in Italia e alcuni suoi caratteri formali. Nei capitoli successivi l’analisi si concentra sugli aspetti della lingua adottata da Igort, in rapporto con le caratteristiche del medium “fumetto” e le peculiarità del genere in cui l’opera è collocata. Le considerazioni finali evidenziano le analogie che intercorrono con la lingua tipica del graphic novel, oltre a individuare tratti frequentemente ricorrenti nel giornalismo a fumetti, evidenziando l’influenza proveniente dalla lingua del giornalismo tradizionale.  Igort’s “ukranian notebooks”A linguistic analysis of a comic strip news report The article considers the Ukrainian Notebooks, memories from the times of the USSR by Igor Tuveri, also known by the pseudonym Igort. The work looks like strip reportage, where the author describes his experience in the former Soviet Union. The first chapter presents the genre of graphic journalism, its diffusion in Italy and some of its formal features. In the following chapters, the analysis focuses on the aspects of the language adopted by Igort, in connection with the characteristics of the medium, “comics”, and the peculiarities of the genre in which the work falls. The final considerations highlight the similarities that exist with the characteristic language of the graphic novel, in addition to identifying traits which frequently recur in journalism/comics, highlighting the influence that comes from the language of traditional journalism.

  12. No 2965, No 254. Report on new energy technologies and carbon dioxide sequestration: scientifical and technical aspects; N. 2965, N. 254. Rapport sur les nouvelles technologies de l'energie et la sequestration du dioxyde de carbone: aspects scientifiques et techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bataille, Ch; Birraux, C

    2006-03-15

    The abatement of CO{sub 2} emissions is a huge technical and economical challenge. Fossil fuels, which represent 88% of the world primary energy consumption, are the main source of the 25 billions of CO{sub 2} released each year in the atmosphere. The mastery of CO{sub 2} emissions cannot come from a single technology but must result from the simultaneous implementation of several means, like the development of carbon-free energies and the mastery of fossil fuel emissions. The opportunities of progress are numerous and compatible with the economic development. This document presents, first, the different greenhouse gases, the CO{sub 2} emissions per country and the main sources of CO{sub 2} emissions (power and heat generation, transports). Then it presents different ways of abatement of CO{sub 2} emissions: clean coal technologies, gas combined cycles, CO{sub 2} sequestration, reduction of fuel consumption in transports, development of carbon-free energies: wind power, solar photovoltaic for decentralized power generation, nuclear energy for a competitive power generation and for CO{sub 2} abatement, biofuels of 2. generation and fuel cells. The conclusion stresses on the investments needed for the renewal and increase of energy capacities, and on the necessary visibility and moderation of emission abatement mechanisms (carbon trading and CO{sub 2} prices). (J.S.)

  13. No 2965, No 254. Report on new energy technologies and carbon dioxide sequestration: scientifical and technical aspects; N. 2965, N. 254. Rapport sur les nouvelles technologies de l'energie et la sequestration du dioxyde de carbone: aspects scientifiques et techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bataille, Ch.; Birraux, C

    2006-03-15

    The abatement of CO{sub 2} emissions is a huge technical and economical challenge. Fossil fuels, which represent 88% of the world primary energy consumption, are the main source of the 25 billions of CO{sub 2} released each year in the atmosphere. The mastery of CO{sub 2} emissions cannot come from a single technology but must result from the simultaneous implementation of several means, like the development of carbon-free energies and the mastery of fossil fuel emissions. The opportunities of progress are numerous and compatible with the economic development. This document presents, first, the different greenhouse gases, the CO{sub 2} emissions per country and the main sources of CO{sub 2} emissions (power and heat generation, transports). Then it presents different ways of abatement of CO{sub 2} emissions: clean coal technologies, gas combined cycles, CO{sub 2} sequestration, reduction of fuel consumption in transports, development of carbon-free energies: wind power, solar photovoltaic for decentralized power generation, nuclear energy for a competitive power generation and for CO{sub 2} abatement, biofuels of 2. generation and fuel cells. The conclusion stresses on the investments needed for the renewal and increase of energy capacities, and on the necessary visibility and moderation of emission abatement mechanisms (carbon trading and CO{sub 2} prices). (J.S.)

  14. Reader-Centered Technical Writing

    Science.gov (United States)

    Narayanan, M.

    2012-12-01

    Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

  15. Aspects of agents for safeguards

    International Nuclear Information System (INIS)

    Kotte, U.

    1999-01-01

    With the development of the Internet and the WWW, information treatment has gained a new dimension. (Intelligent) software agents are one of the means expected to relieve human staff of the burden of information overload, and in the future to contribute to safeguards data acquisition, data evaluation and decision-making. An overview is given for the categories of Internet, intranet and desktop agents. Aspects of the potential application of agents are described in three fields: information access and delivery, collaboration and workflow management, adaptive interfaces and learning assistants. Routine application of agents is not yet in sight, but the scientific and technical progress seems to be encouraging. (author)

  16. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  17. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  18. Aspects and Polymorphism in AspectJ

    DEFF Research Database (Denmark)

    Lorenz, David Harel; Ernst, Erik

    2003-01-01

    There are two important points of view on inclusion or subtype polymorphism in object-oriented programs, namely polymorphic access and dynamic dispatch. These features are essential for object-oriented programming, and it is worthwhile to consider whether they are supported in aspect-oriented......J as the basis for the presentation. The results are not exclusive to AspectJ---aspectual polymorphism may make aspects in any comparable AOSD language more expressive and reusable across programs, while preserving safety....

  19. General aspects of installations for Paje accelerator

    International Nuclear Information System (INIS)

    Goncalez, O.L.; Yanagihara, L.S.

    1985-01-01

    It is done the preliminary proposal for a 180 MeV/50 Kw linear electron accelerator facility, to be used as a pulsed neutron source. Some technical and economic aspects of this facility in the Instituto de Estudos Avancados' accelerator technology program are discussed. (Author) [pt

  20. The Analisis Sentimen Sosial Media Twitter Dengan Algoritma Machine Learning Menggunakan Software R

    Directory of Open Access Journals (Sweden)

    Jaka Aulia Pratama

    2017-10-01

    Full Text Available Media sosial adalah wadah untuk mengungkapkan opini terhadap suatu topik tertentu. Ketersediaan informasi dan opini dari para pengguna media sosial merupakan kumpulan dokumen data berupa teks yang amat sangat besar dan berguna untuk kepentingan penelitian maupun membuat suatu keputusan bagi pihak – pihak tertentu. Text Mining bisa didefinisikan sebagai proses penggalian informasi di mana pengguna berinteraksi dengan kumpulan dokumen dari waktu ke waktu dengan menggunakan suatu alat analisis. Analisis sentimen atau Opinion Mining adalah salah satu studi di bidang komputasi yang berhubungan dengan kasus publik mengenai opini, penilaian, sikap, dan emosi. Penelitian ini akan menggunakan metode Machine Learning pada analisis sentimen pengguna layanan jejaring sosial Twitter terhadap Donald Trump dan Barack Obama dalam 20000 tweets. Nilai akurasi metode Machine Learning yang diperoleh cukup tinggi yaitu 87.52% untuk Data Training dan 87.4% untuk Data Testing.

  1. Technical innovation and management

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Yang Cheol

    1982-08-15

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  2. Technical innovation and management

    International Nuclear Information System (INIS)

    Yoon, Yang Cheol

    1982-08-01

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  3. ANALISIS KELAYAKAN FINANSIAL PROYEK NARROWNECK PRESS AND BLOW UNTUK PROSES PRODUKSIBOTOL MINUMAN BERENERGI DI PT. ABC

    Directory of Open Access Journals (Sweden)

    Toni MT Munthe

    2015-08-01

    Full Text Available PT. ABC merupakan salah satu pabrik yang memproduksi botol kemasan kaca. Penelitian ini bertujuan untuk mengetahui layak atau tidaknya rencana investasi pada proyek Narrow Neck Press and Blow secara finansial di PT. ABC pada periode bulan April 2014 hingga bulan Juni 2014. Analisis kelayakan finansial proyek Narrow Neck Press and Blow, menggunakan metode analisis Net Present Value, Internal Rate of Return, Payback Period dan Sensitivity Analysis. Perbedaan antara nilai sekarang dari semua kas masuk dengan nilai sekarang dari semua kas keluar dari suatu proyek atau suatu investasi diperoleh dengan metode NPV, sedangkan untuk mencari tingkat bunga yang menyamakan nilai sekarang dari aliran kas bersih dan investasi diperoleh dengan metode IRR. Metode analisis yang dapat digunakan untuk mengetahui berapa lamakah waktu yang diperlukan untuk menutup dana yang dikeluarkan untuk suatu proyek dapat diperoleh dengan metode Payback Period. Setelah itu, dilakukan pengujian menggunakan sensitivitas analisis untuk mengetahui tingkat sensitivitas untuk tiap-tiap parameter terhadap persentase kenaikan dan penurunan. Dari hasil analisis data diperoleh nilai NPV sebesar Rp. 1.179.728.649.900,06, nilai IRR sebesar 56,36% dan periode pengembalian terletak pada 2 tahun 2 bulan 9 hari. Dengan menggunakan analisis sensitivitas dapat diketahui bahwa proyek ini sangat sensitif terhadap penurunan volume produksi. Berdasarkan hasil perhitungan, titik impas akan dicapai apabila volume produksi 213.403.267 unit per tahun atau 88,92% dari volume produksi awal. Nilai ini menunjukkan bahwa apabila volume produksi pada suatu periode mengalami penurunan lebih dari 11,08% dari volume produksi awal, maka investasi tersebut akan merugikan.

  4. ANALISIS PENGARUH VARIABILITAS TANAH PADA VARIABILITAS SPEKTRUM RESPON GEMPABUMI

    Directory of Open Access Journals (Sweden)

    I Nyoman Sukanta

    2010-11-01

    Full Text Available Salah satu komplek perkantoran yang terletak di Jalan Thamrin, Jakarta, dipilih sebagai lokasi penelitian. Hasil pemodelan data tanah, menghasilkan 3 lapisan tanah yang berbeda dengan kriteria jenis tanahnya cenderung lunak, dengan nilai N-SPT rata–rata = 11,23. Perhitungan percepatan puncak muka tanah (PGA dan nilai spektrum respon di permukaan tanah menggunakan metoda analisis linier equivalen dengan simulasi Monte Carlo. Program aplikasi SHAKE2000 merupakan alat bantu dalam simulasi, dengan memasukkan beberapa asumsi sebagai data masukan. Data masukan dinamik menggunakan sumber gempabumi Elcentro dan Mexico yang mempunyai kandungan frekuensi berbeda. Asumsi nilai percepatan puncak batuan dasar (PBA untuk kedua sumber gempabumi tersebut sebesar 0,18 g. Hasil analisis menunjukkan nilai spektrum respon dan percepatan puncak muka tanah sangat bervariasi. Gempabumi Elcentro menghasilkan nilai rata–rata PGA = 0,36 g dengan spektrum responnya = 1,0 g  pada Tc = 0,6 detik. Untuk gempabumi Mexico menghasilkan nilai rata–rata PGA = 0,30 g dengan spektrum responnya = 0,9 g pada Tc = 0,6 detik. Artinya, variabilitas jenis tanah sangat berpengaruh tehadap variabilitas spektrum respon di permukaan tanah.   One of the office complex located at Jalan Thamrin, Jakarta, was chosen as the location of the reseach. Results of data modeling soil, produces 3 different soil layers with soil type criteria tend to be soft, with a value of N-SPT  average = 11.23. Calculation of peak ground acceleration (PGA and the value of the response spectrum at ground surface using the method of equivalent linear analysis with Monte Carlo simulation. SHAKE2000 application software  is a tool in the simulation, by including some assumptions as input data. Dynamic input data using Elcentro and Mexican  earthquakes  which have different frequency contents. Assumed value of peak base acceleration (PBA for the two earthquakes was 0.18 g. The result of analysis was the value

  5. Analisis komoditas unggulan perikanan budidaya Kabupaten Pidie Jaya

    Directory of Open Access Journals (Sweden)

    Farok Afero

    2015-06-01

    Full Text Available Abstract. Snapper (Lates calcarifer, grouper (Epinephelus coioides, tiger shrimp (Penaeus monodon, vannamei shrimp (Litopenaeus vannamei and tilapia (Oreochromis niloticus are leading commodity worthly cultivated in Pidie Jaya. Bandar Baru and Tringgadeng an appropriate areas for black tiger shrimp while Jangka Buya and Ulim approriate areas for vannamei cultivation. AHP analysis showed black tiger shrimp is top priority based on the economic value while vannamei shrimp is top priority based on enterprise sustainability. Financial analysis of snapper, grouper, black tiger shrimp, vannamei shrimp and tilapia farming generated positive cash flow and NPV, IRR > 100%, the ratio of benefit to cost of production > 1,30 and payback period of investment costs  < 1 year, thus demonstrating the feasibility of cultivation of these leading commodities. Vannamei shrimp cultivation showed positive prospect as long the market offers premium price. Grouper and snapper had a positive outlook because high demand of high-quality fish in the international market. Keywords: Leading commodity; financial analysis; aquaculture; Pidie Jaya Abstrak. Komoditas kakap (Lates calcarifer, kerapu (Epinephelus coioides,udang windu (Penaeus monodon, udang vannamei (Litopenaeus vannamei dan nila (Oreochromis niloticus adalah komoditas unggulan yang layak dibudidaya di Kabupaten Pidie Jaya. Bandar Baru dan Tringgadeng merupakan kawasan yang layak untuk pengembangan komoditas udang windu sedangkan Jangka Buya dan Ulim layak untuk pengembangan komoditas udang vannamei. Analisis AHP menunjukkan komoditas udang windu menjadi prioritas utama untuk dikembangkan berdasarkan nilai ekonomi sedangkan udang vannamei menjadi prioritas utama berdasarkan keberlanjutan usaha. Analisis indikator keuangan budidaya kakap, kerapu, udang windu, vannamei dan nila menunjukkan usaha budidaya komoditas unggulan menghasilkan arus kas kumulatif dan NPV positif, nilai  IRR diatas 100%, rasio keuntungan

  6. ANALISIS PERILAKU SEKSUAL BERISIKO PADA REMAJA TERINFEKSI HIV DAN AIDS

    Directory of Open Access Journals (Sweden)

    Afritayeni Afritayeni

    2018-03-01

    penelitian eksplanatory research dengan pendekatan kuantitatif.Penelitian ini dilaksanakan dari bulan April-Oktober 2017.Jumlah sampel dalam penelitian ini adalah sebanyak 95 orang remaja yang terinfeksi HIV/ AIDS di Yayasan Sebaya Lancang Kuning dengan teknik pengambilan sampel accidental sampling. Pengumpulan data dilakukan dengan menggunakan data primer dan sekunder. Analisis data menggunakan analisis multivariat dengan uji regresi logistik berganda. Berdasarkan hasil penelitian dapat disimpulkan bahwa faktor yang paling dominan mempengaruhi perilaku seksual remaja adalah dorongan seksual.

  7. ANALISIS KEMAMPUAN KEUANGAN DAERAH PEMERINTAH PROPINSI NUSA TENGGARA BARAT

    Directory of Open Access Journals (Sweden)

    Hery Susanto

    2015-04-01

    Full Text Available This research aims to analyze the regional finance capability in West Nusa Tenggara province. This research uses secondary data of primary source. The data are obtained from the government of West Nusa Tenggara Province in the form of data that has been processed and published and become a legitimate document such as calculation data of APBD in Budgetary Year of 2003-2007. The instruments are used in collecting the data is the analysis of the regional finance capability through Calculation and Work Analysis of PAD, which is the measurement of share and growth, thus classified the result with mapping the financial region capability based on quadrant method. This research draws some conclusions namely: (1 generally, contribution of PAD (share to the total region income of NTB Province TA 2003- 2007 was low, in spite of the growth of PAD was high; (2 based on the measurement of Index Financial Capability (IKK, NTB Province was in the scale index of 0,541. Furthermore, the classification based on the criteria level of regional finance capability, the regional finance capability in NTB Province in 2003 -2007 was a province with high financial capability. There are some suggestions that could be offered to the Government of NTB Province; first, improving PAD share in NTB Province through the excavation of PAD potential sources. Second, concerning with the region cost efficiency, considering that the proportion of PAD achievement was fairly small comparing to the allocation of Region Cost. Penelitian ini bertujuan untuk menganalisis kemampuan keuangan daerah di Propinsi Nusa Tenggara Barat . Penelitian ini menggunakan data sekunder dari sumber utama. Data diperoleh dari pemerintah Propinsi Nusa Tenggara dalam bentuk data yang telah diolah dan dipublikasikan dan menjadi dokumen yang sah seperti data perhitungan APBD Tahun Anggaran 2003-2007. Instrumen yang digunakan dalam pengumpulan data adalah analisis kemampuan keuangan daerah melalui Perhitungan dan

  8. Analisis Reduksi Intensitas Cahaya Pada Smartphones’ Screen Protector Dan Dampaknya Pada Mata

    Directory of Open Access Journals (Sweden)

    Bhekti Kumorowati

    2017-04-01

    Full Text Available Analisis reduksi intensitas cahaya yang melewati screen protector dan identifikasi kemampuan screen protector sebagai pelindung mata dilakukan dengan mengukur reduksi intensitas cahaya menggunakan luxmeter, kemudian menetapkan fokus bahasan yang mencakup kemampuan cahaya menembus screen protector dan analisis fisis screen protector sebagai pelindung mata. Peran sebagai pelindung mata dikaji melalui pendekatan peristiwa polarisasi yaitu proses terserapnya sebagian arah getar cahaya. Dihasilkan sebagian arah getar cahaya layar smartphone sebelum masuk ke mata akan terserap oleh screen protector sehingga dapat memperlambat terjadinya degenerasi makula. Rekomendasi pemilihan screen protector bergantung pada besarnya koefisien atenuasi (koefisien penyerapan yang dimiliki masing-masing screen protector. Koefisien atenuasi terbesar dimiliki oleh screen protector jenis anti spy.

  9. Analisis dan Desain BI-Dashboard Monitoring Realisasi Daftar Isian Pelaksanaan Anggaran (DIPA pada Kantor Pelayanan Perbendaharaan Negara (KPPN

    Directory of Open Access Journals (Sweden)

    Ernestina Rahmanasari

    2013-09-01

    Full Text Available Transaksi keuangan badan pemerintahan tingkat daerah dipertanggungjawabkan kepada Kementrian Keuangan melalui Kantor Pelayanan Perbendaharaan Negara (KPPNsetiap bulan dalam bentuk Laporan Keuangan Pemerintah Pusat (LKPP. Laporan Keuangan, didukung dengan teknologi Business Intelligence(BI dashboarddapat dimanfaatkan sebagai data-driven decision support system yang mendorong performa kinerja. Analisis dan desainterhadap pembuatan BI dashboard menunjukkanbagaimana Laporan Keuangan dapat digunakan untuk monitoring realisasi penyerapan dana DIPA dan kinerja instansi secara tepat waktu dan interaktif.Analisis terdiri dari analisis Indikator Kinerja Utama (IKU dan analisis Laporan Keuangan. IKUpada analisis dan desain ini mencakup ketercapaian estimasi dengan penerimaan, ketercapaian pagu dengan belanja, ketepatan waktu pengiriman rekonsiliasi oleh instansi, validasi, akurasi, dan ketepatan data. Desain terdiri dari katalog dashboard, alur analisis, sumber data, desain User-Interface, dan desain objek dashboard. Sedangkan dashboard yang dirancang menggunakan aplikasi Vera sebagai Enterprise System, mengakses basis data MySQL, dan menampilkan data dengan teknologi data-driven business-intelligence Qlikview. Desain aplikasi yang telah dibuat akan menampilkan 4 (empat Tab yaitu: Dashboard utama, Analisis, Monitoring, dan Laporan

  10. Safety aspects of the RECH-1 core conversion

    International Nuclear Information System (INIS)

    Wetherby, Jaime Riesle

    1998-01-01

    When the RECH-1 research reactor joined the core conversion program for low enrichment fuel, the need to review some safety related aspects, which are currently under way with different degrees of progress, became apparent. The mentioned aspects can be grouped into: evaluation of the technical specifications of the new fuel elements: the technical specifications were carefully verified and contrasted with the recommendations of the IAEA and with those of manufacturers which are widely known for their expertise. (author)

  11. Perbandingan Penilaian Saham Dengan Metode Analisis Fundamental Dan Analisis Tehknical, Penggorengan Saham, Serta Keputusan Penilaian Saham Jika Hasil Berlawanan Arah Untuk Kedua Metode Analisis Pada Saham Bakrie Group Untuk Periode 2005- 2009

    OpenAIRE

    Harwaningrum, Miranti

    2016-01-01

    Beberapa tahun belakangan ini, dunia investasi mengalami peningkatan. Hal ini dapat terlihat dari data rata-rata perdagangan saham yang dimiliki oleh Bapepam. Salah satu jenis instrumen investasi yang sering diminati oleh investor adalah saham. Apabila dibandingkan dengan obligasi, saham memiliki expected return yang lebih tinggi. Namun, saham memiliki resiko yang lebih tinggi bila dibandingkan dengan obligasi. Untuk melakukan penilaian saham ada dua analisis yang dapat dilakukan, yaitu funda...

  12. ANALISIS ATRIBUT-ATRIBUT YANG MEMPENGARUHI TINGKAT KEPUASAN PELANGGAN TELEPON RUMAH (FIXED WIRELINE MENGGUNAKAN METODE ANALISIS DISKRIMINAN (STUDI KASUS DI PT. TELKOM KANDATEL SEMARANG

    Directory of Open Access Journals (Sweden)

    Diana Puspita Sari

    2012-02-01

    Full Text Available PT Telkom memiliki misi untuk memberikan layanan One Stop Infocom dengan kualitas prima dan harga kompetitif. Kenyataannya, PT. Telkom Kandatel Semarang mengalami penurunan pendapatan. Semakin berkembangnya layanan jasa fixed wireless yang lebih mudah dan murah, menyebabkan penurunan pemakaian jasa fixed wireline. Dengan konsumen melakukan pembelian pertama pada suatu produk tertentu dengan harga terjangkau, kualitas terjamin, maka konsumen akan kembali membeli produk tersebut, dan dampaknya dari fenomena ini adalah kepuasan pelanggan (customer satisfaction terhadap produk tertentu karena telah memberikan kepuasan dan terjaminnya kualitas, walaupun banyak pesaing lain.  Oleh sebab itu, penelitian ini membahas dan melakukan analisis kepuasan pelanggan fixed wireline PT. Telkom Kandatel Semarang, menggunakan variabel kepuasan pelanggan untuk dikelompokkan menjadi tiga tingkatan yaitu pelanggan yang sangat puas, puas, dan tidak puas dengan menggunakan analisis klaster, kemudian dilakukan analisis variabel 4P Customer Relationship Management (CRM menggunakan analisis diskriminan, sehingga diketahui atribut yang mempengaruhi tingkat kepuasan pelanggan agar PT. Telkom Kandatel Semarang dapat terus mempertahankan dan meningkatkan kepuasan pelanggan dengan berusaha memenuhi kebutuhan dan keinginan pelanggan dengan maksud kepuasan pelanggan tidak menurun agar dapat meningkatkan intensitas pemakaian fixed wireline. Kata kunci : analisis klaster, analisis diskriminan, kepuasan pelanggan, fixed wireline      PT Telkom has a mission to provide a One Stop Infocom services with excellent quality and competitive price. In fact, PT. Telkom Semarang Kandatel income decreased. The growing fixed wireless service is easier and cheaper, causes a decrease in the use of fixed wireline services.With the first consumer purchase a given product at an affordable price, guaranteed quality, then consumers will buy the product again, and the impact of this phenomenon is

  13. Technical guide to criticality alarm system design

    International Nuclear Information System (INIS)

    Greenfield, B.

    2009-01-01

    An instructional manual was created to guide criticality safety engineers through the technical aspects of designing a criticality alarm system (CAS) for Dept. of Energy (DOE) hazard class 1 and 2 facilities. The manual was structured such that it can be used by engineers designing completely new systems and by those who are working with existing facilities. Major design tasks are thoroughly analyzed to provide concise direction for how to complete the analysis. Regulatory and technical performance requirements were both addressed. (authors)

  14. Technical aspects of biodiesel production from vegetable oils

    OpenAIRE

    Krishnakumar Janahiraman; Venkatachalapathy Karuppannan V.S.; Elancheliyan Sellappan

    2008-01-01

    Biodiesel, a promising substitute as an alternative fuel has gained significant attention due to the finite nature of fossil energy sources and does not produce sulfur oxides and minimize the soot particulate in comparison with the existing one from petroleum diesel. The utilization of liquid fuels such as biodiesel produced from vegetable oil by transesterification process represents one of the most promising options for the use of conventional fossil fuels. In the first step of this experim...

  15. Technical Aspects Of Africa's Economic Development And The ...

    African Journals Online (AJOL)

    Africa's path to economic development has been constrained by destiny and policy choices to different degrees, but evidence does suggest that if institutions are built up, market economy values introduced, and the work ethic harvested, this opening century of a new millennium could indeed by Africa's century.

  16. Photovoltaic Pumps: Technical and Practical Aspects for Applications in Agriculture

    Directory of Open Access Journals (Sweden)

    A. Petroselli

    2012-01-01

    Full Text Available The paper deals with a series of tests conducted on a PV-DC pump in Viterbo (42°24′ North, 12°06′ East. The tests lasted from January 2003 up to November 2004 and involved measurements of solar radiation, on both a horizontal surface and the tilted module surface, flow rates, volumes, and total dynamic heads. In total, up to 3000 data were collected every day whose analysis allowed us to find empirical relationships among system efficiencies, solar radiations, and total dynamic heads. In the second part of the paper we develop a simple method that allows both the assessment of performances of the whole system when installed in a different site from that in which the tests were performed and the optimal inclination angle of the panel to be determined in relation to annual or seasonal use (see irrigation.

  17. Physical and technical aspects of lead cooled fast reactors safety

    International Nuclear Information System (INIS)

    Orlov, V.V.; Smirnov, V.S.; Filin, A.I.

    2001-01-01

    The safety analysis of lead-cooled fast reactors has been performed for the well-developed concept of BREST-OD-300 reactor. The most severe accidents have been considered. An ultimate design-basis accident has been defined as an event resulting from an external impact and involving a loss of leak-tightness of the lead circuit, loss of forced circulation of lead and loss of heat sink to the secondary circuit, failure of controls and of reactor scram with resultant insertion of total reactivity margin, etc. It was assumed in accident analysis that the protective feature available for accident mitigation was only reactivity feedback on the changes in the temperatures of the reactor core elements and coolant flow rate, and in some cases also actuation of passive protections of threshold action in response to low flow rate and high coolant temperature at the core outlet. It should be noted that the majority of the analyzed accidents could be overcame even without initiation of the above protections. It has been demonstrated that a combination of inherent properties of lead coolant, nitride fuel, physical and design features of fast reactors will ensure natural safety of BREST and are instrumental for avoiding by a deterministic approach the accidents associated with a significant release of radioactivity and requiring evacuation of people in any credible initiating event and a combination of events. (author)

  18. Technical Aspects of Telepathology with Emphasis on Future Development

    Directory of Open Access Journals (Sweden)

    P. Schwarzmann

    2000-01-01

    Full Text Available Pathology undergoes presently changes due to new developments in diagnostic opportunities and cost saving efforts in health care. Out of the wide field of telepathology the paper selects three prototype applications: telepathology in teleeducation, expert advice for preselected details of a slide and finally telepathology for remote diagnosis. The most challenging field for remote diagnosis is the application in the frozen section scenario. The paper starts with the mental experiment to map conventional procedures to counterparts in telepathology.

  19. Technical aspects of biodiesel production from vegetable oils

    Directory of Open Access Journals (Sweden)

    Krishnakumar Janahiraman

    2008-01-01

    Full Text Available Biodiesel, a promising substitute as an alternative fuel has gained significant attention due to the finite nature of fossil energy sources and does not produce sulfur oxides and minimize the soot particulate in comparison with the existing one from petroleum diesel. The utilization of liquid fuels such as biodiesel produced from vegetable oil by transesterification process represents one of the most promising options for the use of conventional fossil fuels. In the first step of this experimental research, edible rice bran oil used as test material and converted into methyl ester and non-edible jatropha vegetable oil is converted into jatropha oil methyl ester, which are known as biodiesel and they are prepared in the presence of homogeneous acid catalyst and optimized their operating parameters like reaction temperature, quantity of alcohol and the catalyst requirement, stirring rate and time of esterification. In the second step, the physical properties such as density, flash point, kinematic viscosity, cloud point, and pour point were found out for the above vegetable oils and their methyl esters. The same characteristics study was also carried out for the diesel fuel for obtaining the baseline data for analysis. The values obtained from the rice bran oil methyl ester and jatropha oil methyl ester are closely matched with the values of conventional diesel and it can be used in the existing diesel engine without any hardware modification. In the third step the storage characteristics of biodiesel are also studied. .

  20. Communications network traffic data : technical and legal aspects

    NARCIS (Netherlands)

    Fischer, J.C.

    2010-01-01

    Communications traffic data is a legal data concept that can be explained by the example of traditional, non-digital mail: For a letter to be sent by post it must be enclosed in an envelope. On the envelope the name of the addressee, his address and some information about the sender are noted.

  1. National Project Management Corp (United States). [Technical and regulatory aspects

    International Nuclear Information System (INIS)

    DeBor, Joseph

    2013-01-01

    Studies of the VHTR fuel cycle which involves: (i) use of light water cooled reactor (LWR) spent fuel as kernel feedstock; (ii) recycle of spent VHTR fuel; (iii) use of the VHTR in the management of transuranics (TRU); and, (iv) the geologic storage performance of spent VHTR fuel

  2. The principles and technical aspects of diuresis renography

    International Nuclear Information System (INIS)

    Conway, J.J.

    1989-01-01

    It is intuitive that dilation of the urinary tract is most likely caused by obstruction. However, the opposite is more often true. That is, dilation is not associated with obstruction, especially in children. The most common causes for hydronephrosis and hydroureter include infection, vesicoureteral reflux, congenital megacalyces and megaureter, previous obstruction, and bladder noncompliance. Theoretically, one can consider obstruction on the basis of its significance, which is that there may be a loss of renal function with time. Techniques such as intravenous pyelography and ultrasonography, which anatomically document the degree of dilation of the urinary tract, cannot quantitatively determine the presence of obstruction or its significance. Radionuclide renography more readily quantifies abnormal renal function. Serial renographic studies with furosemide can document renal function loss and, thus, determine the significance of the obstruction. Diuresis renography with furosemide provides an objective quantitative means for determining the renal function changes over time

  3. Water management paradigms in Iran: technical, social and ethical aspects

    NARCIS (Netherlands)

    Balali, M.R.; Keulartz, F.W.J.; Korthals, M.J.J.A.A.

    2007-01-01

    In Iran, water scarcity is one of the main problems threatening food security. The country is confronted with the challenge to continue the expansion of food production to meet future demand without negative effects on the environment. To illuminate the problems and perspectives of water management

  4. Stoma-Const - the technical aspects of stoma construction

    DEFF Research Database (Denmark)

    Correa Marinez, Adiela; Erestam, Sofia; Haglind, Eva

    2014-01-01

    -related quality of life and health economic analysis as well as re-operation rate and mortality within 30 days and 12 months of primary surgery. Follow-up is scheduled at 4-6 weeks, and 6 and 12 months. Inclusion is set at 240 patients. DISCUSSION: Parastomal hernia is a common complication after colostomy...

  5. Ethical aspects of the assessment of technical risks

    International Nuclear Information System (INIS)

    Birnbacher, D.

    1991-01-01

    When technology assessment goes over into technology politics, then questions arise which can only be answered in an ethical way. Questions like, which risk strategy has to be the basis for decision-making, and is a decision for or against the development, introduction or maintenance of a certain technology to be based at all on risk assessments? The author considers pure consequentialistic ethics the most plausible option, and does not see a basic difference in a risk-benefit analysis and ethical technology assessment. (DG) [de

  6. Technical design aspects of Feasibility Study-II

    International Nuclear Information System (INIS)

    Zisman, Michael S.

    2001-01-01

    Feasibility Study-II examined a high-performance Neutrino Factory providing 1 x 10 20 neutrinos per year aimed at a long-baseline detector. The Study was sponsored jointly by BNL and the Neutrino Factory and Muon Collider Collaboration ration (MC) and is based on a 1 MW proton driver operating at 24 GeV, i.e., an upgraded version of the AGS accelerator. Compared with the earlier FNAL-sponsored study (Feasibility Study-I), there is a sixfold improvement in performance. Here we describe details of the implementation of Study-II concepts and discuss their efficacy. Alternative approaches that will be pursued in follow-on R and D activities are also described briefly

  7. TECHNICAL-TECHNOLOGICAL ASPECTS OF APPLYING NEW FORMS OF PLOUGHSHARE

    Directory of Open Access Journals (Sweden)

    Đuro Banaj

    2008-07-01

    Full Text Available Investigation of the various ploghshare materials wear on the five bottom plough was conducted in October and November, 2001. The ploughing was carried out on a carbonate humogley of powder clay texture. While working, the power unit work speed ranged from 4.9 km/h to 6.40 km/h, averaging 5.58 km/h. The ploughing was done at depth of 25.5 cm on the average. The ploughshares were used for 309 hours. The total of 226 ha were ploughed consuming 1.37 h/ha. Each ploughshare ploughed 22.6 ha. Total weight of all ploughshares amounted to 38625 g prior the investigation and 30460 g at its end. It is by 8165 g i.e. 21.13% less compared to the initial weight. The loss of 760 and 930 g i.e. 33.5 and 38.1% referred mostly to D1 and L1 respectively. After the investigation they became useless for further work. Their use costs amount to HRK 10.06/ha.Tip of the ploughsahres D2 and L2 were useless after their work resulted in 33.3% loss of the initial weight. The third group of the ploughshares including ploughsahres D3, L3, D4 and L4 was characterized by an average weight loss of 770 g i.e. 18.5% whereas use costs ranged from 4.41 to 5.57 HRK/ha. They were able for continued ploughing. Tip of the ploughsahers D5 and L5, known for the loss of 27.1% of the initial weight became useless for the further work. Their costs were 3.03 HRK/ha.

  8. Technical and anatomical aspects of novalis stereotactic radiosurgery sphenopalatine ganglionectomy

    International Nuclear Information System (INIS)

    De Salles, Antonio A.F.; Gorgulho, Alessandra; Golish, S. Raymond Ph.D.; Medin, Paul M.; Malkasian, Dennis; Solberg, Timothy D.; Selch, Michael T.

    2006-01-01

    Background: Several techniques have been applied for destruction of the sphenopalatine ganglion to control cluster headache and ocular pain with sympathetic component. Cluster headache has responded to radiofrequency ablation or phenol destruction. Radiosurgery of the sphenopalatine ganglion is promising due to the excellent visualization of the target on magnetic resonance imaging (MRI), computed tomography (CT), and skull X-rays. Material and Methods: Six patients and one cadaver head were analyzed in this study. The cadaver-head dissection confirmed the location of the sphenopalatine ganglion on X-rays and CT imaging. One patient undergoing radiofrequency sphenopalatine ablation participated for confirmation of the location of the ganglion on plain X-rays. Five patients received radiosurgery of the sphenopalatine ganglion. One patient had classic unilateral cluster headache. Two patients had neuropathic pain and 1 had bilateral migrainous neuralgia. The fifth patient had bilateral atypical facial pain. All received a single maximal dose of 90 Gy with a 5- or 7.5-mm circular collimator. MRI, CT, and skull X-rays identified and confirmed the target. Results: The sphenopalatine fossa is seen in the skull X-ray as an inverse tear drop just caudal to the sphenoid sinus. This location is readily correlated to the CT target by the stereotactic coordinates and confirmed with the presence of the ganglion visualized in the MRI scan. Only the patient with cluster headache experienced lasting pain relief. Conclusion: Multiple imaging modalities confirmed the location of the sphenopalatine ganglion for radiosurgery. The procedure was performed safely with CT and MRI fusion. Radiosurgery was significantly beneficial only on classic cluster headache

  9. Aspects of the technical development for NET (Next European Torus)

    International Nuclear Information System (INIS)

    Toschi, Romano

    1987-01-01

    NET is envisaged to form, in the European fusion development program, the link between the present-day NET and the following Fusion Demonstration Reactor. The main performance objectives are: the ignition margin, the burn pulse duration and the testing capabilities. The most important design parameters are listed. The operation schedule compromises different stages, e.g. one to maximize the physics capability and another to test two design iterations of a blanket concept. At the end of the operation the machine will have accumulated 10 5 cycles and 400 days of integrated operating time corresponding to 0,8 MWy/m 2 of neutron fluence. Then selection of workable contenders for all DEMO components will be possible. Conceptually the machine is devided into 1) a relatively permanent structure, the support structure, the main vacuum containment and shielding and 2) removable and exchangeable parts such as divertor plates, blanket and first wall. The problems as seen from the present state of knowledge are outlined in connection with the particular parts. Finally, comments on the magnets, the blanket and the first wall/divertor are made. 3 figs. (qui)

  10. Technical and economic aspects of nuclear power plant decommissioning

    International Nuclear Information System (INIS)

    Glauberman, H.; Manion, W.J.

    1977-01-01

    Nuclear power plants may be decommissioned by one of three primary methods - mothballing, entombing, or dismantling, or by using combinations such as mothballing or entombing for a period of time followed by dismantling. Mothballing or entombing both result in an end-product which requires surveillance and maintenance for a significant period to ensure protection of public health and safety. This paper discusses costs for each of the decommissioning methods, including factors that will influence the method selected as well as the total costs. Decommissioning costs have been estimated for an 1100-MW(e) light-water reactor within one year after shutdown following forty years of operation. The basic economic parameters for each decommissioning method were developed using unit cost factors based on known costs of previously decommissioned reactors. Decommissioning cost estimates range from less than four million dollars for mothballing to about forty million dollars for complete dismantling. Estimated cost of entombment is about ten million dollars. Subsequent annual cost of surveillance and maintenance for a reactor facility using the mothballing or entombment method could be as high as US $200,000. Although some tooling development will be needed for removing highly activated reactor vessel segments and internals, technology is currently available and has been demonstrated on prior decommissionings, e.g. the BONUS and HALLUM reactor entombments and the Elk River Reactor complete dismantling. Costs associated with decommissioning are significant; however, allowance for them either as a one-time construction period sinking fund, or annual depreciation type operating allowance, will have little effect on construction or on operating costs. (author)

  11. Geoecological and technical aspects of radon mapping in Belarus

    International Nuclear Information System (INIS)

    Lobach, D.I.

    2002-01-01

    There are presented some actual directions of radon mapping in order to stimulate this procedure in Belarus. The first steps should be both providing the detail investigation of potential radon dangerous regions and adopting of existing devices for measurements of radon in ground water and soil

  12. The principles and technical aspects of diuresis renography

    Energy Technology Data Exchange (ETDEWEB)

    Conway, J.J. (Children' s Memorial Hospital, Chicago, IL (USA))

    1989-12-01

    It is intuitive that dilation of the urinary tract is most likely caused by obstruction. However, the opposite is more often true. That is, dilation is not associated with obstruction, especially in children. The most common causes for hydronephrosis and hydroureter include infection, vesicoureteral reflux, congenital megacalyces and megaureter, previous obstruction, and bladder noncompliance. Theoretically, one can consider obstruction on the basis of its significance, which is that there may be a loss of renal function with time. Techniques such as intravenous pyelography and ultrasonography, which anatomically document the degree of dilation of the urinary tract, cannot quantitatively determine the presence of obstruction or its significance. Radionuclide renography more readily quantifies abnormal renal function. Serial renographic studies with furosemide can document renal function loss and, thus, determine the significance of the obstruction. Diuresis renography with furosemide provides an objective quantitative means for determining the renal function changes over time.

  13. SEMANTIC NETWORKS: THEORETICAL, TECHNICAL, METHODOLOGIC AND ANALYTICAL ASPECTS

    Directory of Open Access Journals (Sweden)

    José Ángel Vera Noriega

    2005-09-01

    Full Text Available This work is a review of the methodological procedures and cares for the measurement of the connotative meanings which will be used in the elaboration of instruments with ethnic validity. Beginning from the techniques originally proposed by Figueroa et al. (1981 and later described by Lagunes (1993, the intention is to offer a didactic panorama to carry out the measurement by semantic networks introducing some recommendations derived from the studies performed with this method.

  14. Technical, Psychological, and Economic Aspects of DIEP Flap Breast Reconstruction

    NARCIS (Netherlands)

    T.H.C. Damen (Tim)

    2011-01-01

    textabstractIn the Western world the incidence of breast cancer (BC) is high. In the Netherlands the lifetime risk for women to develop BC is around 13%, making it the most common form of cancer among women with approximately 12.000 women being diagnosed annually. Also, increasing numbers of women

  15. Technical aspects of coal use in the Japanese steel industry

    International Nuclear Information System (INIS)

    Iguchi, T.

    1991-01-01

    Japan's crude steel production exceeded 100 million tons for the first time in fiscal 1972 and reached a peak of 120 million tons in fiscal 1973, as shown in this paper. The Japanese steel industry then switched from quantity to quality in line with production and market trends in the world. In fiscal 1987, all steelmakers announced future plans for reductions in steel production facilities on the assumption that Japan's crude steel production would hover around 90 million tons in response to the change in the country's production structure. Although steel production has held strong with the expansion in domestic steel demand triggered by the government's economic policy and the production plans that have eventually put their original production plans into practice. In its energy-saving activities prompted by 2 oil rises, the Japanese steel industry has dramatically improved its energy costs through energy conservation, waste heat recovery and process step consolidation, as represented by the reductions in blast furnace fuel rate and coke-oven heat consumption. During this period, the Japanese steel industry has won independence from oil and increased dependence on coal. This paper describes coal utilization technologies in coke ovens and blast furnaces, 2 major coal consuming processes in the steel industry. The environmental problems associated with the use of coal are discussed as well

  16. Technical aspects of mediastinal ultrasound for pediatric pulmonary tuberculosis

    NARCIS (Netherlands)

    Pool, Kara-Lee; Heuvelings, Charlotte C.; Bélard, Sabine; Grobusch, Martin P.; Zar, Heather J.; Bulas, Dorothy; Garra, Brian; Andronikou, Savvas

    2017-01-01

    Diagnosing childhood pulmonary tuberculosis (TB) may be challenging due to difficulties in obtaining adequate sputum samples, paucibacillary disease and the low sensitivity of diagnostic tests. Chest radiography is an important diagnostic tool for pulmonary TB, but it involves radiation exposure,

  17. Phrenic nerve conduction studies: normative data and technical aspects

    Directory of Open Access Journals (Sweden)

    Analucia Abreu Maranhão

    Full Text Available ABSTRACT Objective: The aim of the present study was to define normative data of phrenic nerve conduction parameters of a healthy population. Methods: Phrenic nerve conduction studies were performed in 27 healthy volunteers. Results: The normative limits for expiratory phrenic nerve compound muscle action potential were: amplitude (0.47 mv - 0.83 mv, latency (5.74 ms - 7.10 ms, area (6.20 ms/mv - 7.20 ms/mv and duration (18.30 ms - 20.96 ms. Inspiratory normative limits were: amplitude (0.67 mv - 1.11 mv, latency (5.90 ms - 6.34 ms, area (5.62 ms/mv - 6.72 ms/mv and duration (13.77 ms - 15.37 ms. Conclusion: The best point of phrenic nerve stimulus in the neck varies among individuals between the medial and lateral border of the clavicular head of the sternocleidomastoid muscle and stimulation of both sites, then choosing the best phrenic nerve response, seems to be the appropriate procedure.

  18. Phrenic nerve conduction studies: normative data and technical aspects.

    Science.gov (United States)

    Maranhão, Analucia Abreu; Carvalho, Sonia Regina da Silva; Caetano, Marcelo Ribeiro; Alamy, Alexandre Hofke; Peixoto, Eduardo Mesquita; Filgueiras, Pedro Del Esporte Peçanha

    2017-12-01

    The aim of the present study was to define normative data of phrenic nerve conduction parameters of a healthy population. Phrenic nerve conduction studies were performed in 27 healthy volunteers. The normative limits for expiratory phrenic nerve compound muscle action potential were: amplitude (0.47 mv - 0.83 mv), latency (5.74 ms - 7.10 ms), area (6.20 ms/mv - 7.20 ms/mv) and duration (18.30 ms - 20.96 ms). Inspiratory normative limits were: amplitude (0.67 mv - 1.11 mv), latency (5.90 ms - 6.34 ms), area (5.62 ms/mv - 6.72 ms/mv) and duration (13.77 ms - 15.37 ms). The best point of phrenic nerve stimulus in the neck varies among individuals between the medial and lateral border of the clavicular head of the sternocleidomastoid muscle and stimulation of both sites, then choosing the best phrenic nerve response, seems to be the appropriate procedure.

  19. Technical and economic aspects of nuclear power plant decommissioning

    International Nuclear Information System (INIS)

    Glauberman, H.; Manion, W.J.

    1977-01-01

    Nuclear power plants may be decommissioned by one of three primary methods, namely, mothballing, entombing, or dismantling or by using combinations such as mothballing or entombing for a period of time followed by dismantling. Mothballing or entombing both result in an end-product which require surveillance and maintenance for a significant period of time to ensure protection of public health and safety. This paper discusses costs for each of the decommissioning methods, including factors that will influence the method selected as well as the total costs. Decommissioning costs have been estimated for a 1100 MW(e) light water reactor within one year after shutdown following forty years of operation. The basic economic parameters for each decommissioning method were developed using unit cost factors based on known costs of previously decommissioned reactors. Decommissioning cost estimates range from less than four million dollars for mothballing to about forty million dollars for complete dismantling. Estimated cost of entombment is about ten million dollars. Subsequent annual cost of surveillance and maintenance for a reactor facility using the mothballing or entombment method could be as high as $200,000. Although some tooling development will be needed for the removal of the highly activated reactor vessel segments and internals, technology is currently available and has been demonstrated on prior decommissionings, e.g., the BONUS and HALLUM reactor entombments and the Elk River Reactor complete dismantling. Costs associated with decommissioning are significant; however, allowance for them either as a one-time construction period sinking fund or annual depreciation type operating allowance will have little impact on either construction or operating costs

  20. Holmium laser enucleation of the prostate hyperplasia: technical aspects

    Directory of Open Access Journals (Sweden)

    P. V. Glybochko

    2015-01-01

    Full Text Available Holmium laser enucleation of the prostate (HoLEP was first described by doctor P.J. Gilling et al. from New Zealand in 1996. The operation involves anatomical dissection of the prostatic tissue off the surgical capsule using a high-powered holmium laser followed by intravesical morsellation. The objective of this article is to explain the techniques for HoLEP.

  1. Technical and cost aspects of radioactive wastes from decommissioning

    International Nuclear Information System (INIS)

    Claes, J.; Menon, S.

    2001-01-01

    The OECD Nuclear Energy Agency's Co-operative Programme on Decommissioning was established in 1985 to share the experience and information emerging from on-going decommissioning projects within member countries. The main aim of the programme is to gather and collate such data, which can then provide the basis for planning the future industrial phase of decommissioning of commercial nuclear plants. Starting with 10 decommissioning projects in 1985, today the programme has 35 participating projects from 12 countries. Apart from exchanging valuable information, task groups have been set up for in-depth analysis and studies of areas of common interest, among which are the recycling of material from decommissioning projects and decommissioning costs. This paper will describe the structure and mode of operation of the programme. Some of the results of the work in the task groups will be presented, with particular emphasis on the management of materials from decommissioning and on decommissioning costs. (author)

  2. Reprocessing of nuclear fuels: economical, ecological and technical aspects

    International Nuclear Information System (INIS)

    Kueffer, K.

    1994-01-01

    The report deals with the questions on reprocessing and final storage of spent fuel elements from the point of view of the Swiss. The contractual obligations were discussed, of the present situation of reprocessing and their assessment. 1 fig

  3. Quality control of nuclear fuels - technical and economic aspects

    International Nuclear Information System (INIS)

    Strasser, A.A.

    1982-01-01

    The qualification and resolution of questions relating to the cost benefit of quality control are based on the interaction of a broad range of technologies and economics. This paper discusses examples of current areas of interest in quality control, and their relationship to the fuel cycle costs. (orig.)

  4. Analisis Vegetasi di Hutan Mbeji Daerah Wonosalam Jombang

    Directory of Open Access Journals (Sweden)

    Anita Munawwaroh

    2016-03-01

    Full Text Available Analisis vegetasi terhadap hutan perlu dilakukan untuk mengetahui keanekaragaman hayati yang terdapat di hutan tersebut sehingga mempermudah didalam melakukan pemeliharaan dan pemberdayaan hutan.Tujuan dari penelitian ini adalah untuk mengetahui keanekaragaman hayati dan struktur vegetasi (frekuensi, kerapatan, dominansi, dan Indeks Nilai Penting di hutan mbeji, Wonossalam, Jombang. Pada penelitian ini digunakan metode point centered quarter. Pennelitian dilakukan pada bulan Mei 2015. Hasil penelitian menujukkan padaHutan Mbeji terdapat 11 jenis pohon yang teridentifikasi dan 15 spesies tumbuhan, dimana ada 10 spesies yang telah teridentifikasiNilai penting  tumbuh-tumbuhan di Hutan Mbeji di daerah Wonosalam Jombang  pada tingkat pohon paling tinggi adalah pohon randu (Ceiba petandra  sebesar 57,42 % sedangkan nilai INP paling rendah dari jenis pohon andong (Rhadamnia cinerea yaitu sebesar 6,06 %. Pada sapling nilai penting yang paling tinggi adalah talas (Colocasia esculenta yaitu sebesar 49,23 %. Sedangkan, nilai INP paling rendah dari jenis nanas (Ananas comosus, nangka (Artocarpus heterophyllus, tapak liman (Elephantopus scaber, semak A, semak B, semak C, semak E, dan semak F yaitu sebesar 6,35 %. Tingginya nilai INP menunjukkan bahwa jenis-jenis tersebut dapat menyesuaikan diri dengan lingkungan sekitarnya yang lebih baik dibanding jenis lainnya.

  5. ANALISIS MODEL PENERIMAAN PENGGUNA SISTEM PELAPORAN PAJAK ONLINE

    Directory of Open Access Journals (Sweden)

    Muhammad Malik Hakim

    2016-04-01

    Full Text Available Direktorat Jenderal Pajak saat ini telah menerapkan e-SPT dan e-Filing sebagai sarana digitalisasi dan otomasi pelaporan pajak. Untuk meningkatkan transformasi bisnis proses dalam sistem pelayanan perpajakan dari sistem manual ke digital, diperlukan kesiapan dan penerimaan pengguna yang cukup memadai. Studi dan analisis perlu dilakukan untuk mengetahui sejauh mana tingkat penerimaan pengguna dalam menggunakan sistem e-SPT dan e- Filing. Studi dilakukan secara kuantitatif menggunakan model UTAUT yang telah dimodifikasi untuk menganalisis model penerimaan pengguna yang merupakan Wajib Pajak Orang Pribadi yang telah menggunakan e-SPT dan e- Filing. Jumlah responden dalam penelitian ini sejumlah 235 responden yang disebarkan dengan cara snow ball sampling. Hasil penelitian menunjukkan perbedaan model penerimaan e-SPT dan e-Filing dari jenis kelamin dan kelompok umur. Pengaruh harapan kinerja (PE dan pengaruh sosial (SI terhadap niat perilaku (BI, serta pengaruh niat perilaku (BI pada penggunaan aktual (AU pada pria lebih kuat dibandingkan pada wanita. Sebaliknya, pengaruh harapan usaha (EE terhadap niat perilaku (BI dan fasilitas pendukung / penunjang (FC terhadap penggunaan aktual (AU pada wanita dijumpai memberikan pengaruh yang lebih kuat. Selain itu, di dalam kelompok umur, pengaruh terhadap semua variabel yang diteliti ternyata lebih kuat pada kelompok umur 25 35 tahun. Kata kunci: model penerimaan pengguna, UTAUT, pelaporan pajak, e-SPT, e-filing.

  6. ANALISIS TINGKAT PENDAPATAN PEDAGANG CANANG DI PASAR BADUNG

    Directory of Open Access Journals (Sweden)

    Surya Dewi Rustariyuni

    2015-12-01

    Full Text Available This studyanalyzes thecharacteristic of “canang”sellers, their economicactivities, their revenues, the factors which influencethem to chooseBadung Market for selling their products and theircontributions in their household economy. As a matter of fact,all of Hindu ismpeoplein Bali use canang everyday for conductingall ceremonies, but only few people whomake canang. It has occured foryears. The method used for analizing the data isdescriptive analysis. The result shows thatthe canang sellersare mostlyfrom Bali. They are dominated by married women atthe age of 15 up to 35 years old. Then, theireducational backgroundaresenior high schools. They start selling early in the morning and stop their activities in the evening.Finally, usually the sellers get much money when there is a big ceremony.Penelitian ini menganalisis karakteristik penjual "canang", kegiatan ekonominya, pendapatannya, faktor-faktor yang mempengaruhi penjual canang untuk memilih Pasar Badung sebagai tempat untuk menjual canangnya dan kontribusi penjual canang dalam perekonomian rumah tangga. Sebenarnya, semua orang Hindu di Bali menggunakan canang setiap hari untuk melakukan semua upacara, tetapi hanya sedikit orang yang membuat canang. Ini telah terjadi selama bertahun-tahun. Metode yang digunakan untuk menganalisis data disini adalah analisis deskriptif. Hasil penelitian menunjukkan bahwa para penjual canang sebagian besar dari Bali. Mereka didominasi oleh perempuan yang sudah menikah danusianya antara 15 hingga 35 tahun. Kemudian, latar belakang pendidikan mereka adalah sekolah menengah atas. Mereka mulai menjual canang di pagi hari dan selesai di malam hari. Biasanya para penjual mendapatkan uang banyak ketika ada upacara besar.

  7. Analisis Cost-Volume-Profit Kaitannya dengan Perencanaan Laba

    Directory of Open Access Journals (Sweden)

    Rian Andriani

    2018-01-01

    Full Text Available Tujuan penelitian  ini adalah untuk menganalisis cost, volume, profit Break Event Point dan Margin Of Safety L.A English Course Baleendah Bandung pada kuartal I – IV. Metode penelitian yang digunakan adalah metode penelitian kuntitatif deskriptif. Teknik pengumpulan data menggunakan studi pustaka, observasi, wawancara, dan dokumentasi yang memiliki hubungan dengan pokok permasalahan. Teknik analisis data yang digunakan metode regresi kuadrat terkecil, break event point dan margin of safety.  Hasil menunjukan, biaya tertinggi terdapat pada kuartal I, volume penjualan  tertinggi terdapat pada kuartal I, laba tertinggi terdapat pada kuartal I, Break Event Point tertinggi terdapat pada kuartal I. Sedangkan Margin of safety (% tertinggi pada kuartal IV yaitu 91.9%. Masalah yang timbul dalam  perencanaan  laba yaitu pertama  pendapatan L.A English Course  naik turun  dalam satu  tahunnya, kedua  kurangnya promosi untuk beberapa program kecuali program regular. Upaya dalam mengatasi masalah yang timbul di L.A English Course yaitu pertama memberikan gratis biaya daftar, dan memberi voucher untuk siswa L.A yang memasukan siswa baru., kedua membagikan brosur, dan menawarkan program L.A. dengan melakukan follow up semua nomor telepon tamu yang pernah berkunjung.

  8. ANALISIS PENGARUH PERUBAHAN EARNINGS DAN RISIKO PASAR TERHADAP STRUKTUR MODAL

    Directory of Open Access Journals (Sweden)

    Endi Sarwoko

    2006-05-01

    Full Text Available Penelitian ini bertujuan untuk menguji perbedaan rata-rata struktur modal antar industri, menguji pengaruh perubahan earnings perusahaan terhadap struktur modal, dan menguji pengaruh risiko pasar dengan struktur modal perusahaan. Struktur modal dalam penelitian ini diproksikan dengan debt to equity ratio dan debt to total assets. Data diperoleh dari Pojok Bursa Efek Jakarta (BEJ Universitas Brawijaya, sampel sebanyak 40 perusahaan yang diambil secara Purposive dengan kriteria perusahaan-perusahaan tersebut aktif mencatatkan laporan keuangannya di BEJ dan aktif melakukan perdagangan saham selama 6 tahun terakhir. Hasil analisis menunjukkan bahwa terdapat pengaruh terbalik antara perubahan earnings perusahaan terhadap D/E tetapi perubahan earnings ternyata tidak berpengaruh signifikan terhadap D/A. Risiko pasar tidak berpengaruh signifikan terhadap debt to equity, hasil ini menunjukkan bahwa ketika akan melakukan pembelian saham investor tidak mempertimbangkan risiko pasar. Sedangkan berdasarkan pengaruh terhadap D/A diperoleh hasil risiko pasar berpengaruh signifikan terhadap debt to total assets,  manajemen perusahaan sangat memperhatikan dampak risiko pasar dalam menentukan kebijakan struktur modal perusahaan, karena dalam memberikan pinjaman kreditur biasanya sangat mempertimbangkan aset yang dimiliki perusahaan didanai dari mana, hutang atau modal sendiri.

  9. Analisis ergonomi postur kerja operator pada proses pembuatan batako

    Directory of Open Access Journals (Sweden)

    Regina Anggraini

    2017-03-01

    Full Text Available Abstrak: Proses pembuatan batako merupakan salah satu pekerjaan yang membutuhkan penanganan material secara manual,sehingga tenaga fisik pekerja diperlukan meskipun mesin bantu cetak sudah tersedia. Berdasarkan pengamatan dilapangandiketahui bahwa seluruh aktivitas pembuatan batako banyak membutuhkan tenaga fisik. Pekerjaan membuat batako dapatdibagi menjadi beberapa elemen kerja dan setiap elemen kerja memberikan postur kerja yang bervariasi. Hasil analisis posturkerja dengan menggunakan REBA menunjukkan pekerja pada proses pemindahan batako basah memiliki nilai 11 dengan levelrisiko sangat tinggi. Perbaikan dilakukan dengan menambahkan kursi pekerja dan berhasil menurunkan skor REBA menjadi 5.Kata Kunci: Postur kerja, REBA Abstract: Brick-making process is one of those jobs that require manual materials handling, so that the physical exertion of workersneeded though a production machine is already available. Based on observations in the field note that the entire activity ofbrick-making requires a lot of physical exertion. Brick-making can be divided into several working elements and each element ofthe work provides a varied work posture. The results of the analysis work posture using REBA showed workers in the processof moving the wet concrete blocks have a value of 11 with a very high risk level. Improvement of working conditions by adding aseat for workers reduce the REBA score to 5 .Keywords: Work Posture , REBA

  10. ANALISIS PENGARUH TINGKAT KESEHATAN BANK TERHADAP RETURN ON ASSET

    Directory of Open Access Journals (Sweden)

    Andy Setiawan

    2017-10-01

    Full Text Available Penelitian  ini  dilakukan  untuk  menganalisis pengaruh  tingkat kesehatan bank terhadap return on asset (ROA berdasarkan metode risk based bank rating (RBBR. Variabel independen yang diteliti adalah Non  Performing  Loan  (NPL, Loan to Deposit Ratio (LDR, Net Interest Margin (NIM, Capital Adequacy Ratio (CAR,  BOPO   (Biaya   Operasional/Pendapatan Operasional, Good Corporate Governance (GCG dan Posisi  Devisa  Netto  (PDN terhadap variabel dependen Return On Asset (ROA. Sampel yang digunakan  adalah  seluruh bank BUKU 4 di Indonesia selama periode 2007-2014. Teknik analisis data yang  digunakan  adalah  regresi  linier  berganda. Hasil penelitian ini menunjukkan bahwa tingkat kesehatan bank dengan metode RBBR berpengaruh signifikan secara bersama terhadap ROA. Secara parsial LDR, NIM, BOPO, dan PDN berpengaruh signifikan terhadap ROA. Sedangkan variabel NPL, GCG dan CAR tidak berpengaruh signifikan. Kemampuan prediksi dari ketujuh variabel  tersebut  terhadap  ROA  dalam  penelitian  ini  sebesar  93,7%,  sedangkan sisanya 6,3% dipengarui oleh faktor lain yang tidak dimasukkan ke dalam model penelitian.

  11. ANALISIS KADAR SIKLAMAT PADA ES KRIM DI KOTA BANJARBARU

    Directory of Open Access Journals (Sweden)

    Nurlailah Nurlailah

    2017-07-01

    Full Text Available Pemanis merupakan salah satu komponen yang sering ditambahkan dalam bahan makanan. Pemanis buatan yang banyak beredar di masyarakat adalah siklamat. Konsumsi siklamat yang melebihi dosis akan mengakibatkan kanker kandung kemih. Selain itu akan menyebabkan tumor paru, hati, dan limfa. Tujuan penelitian ini adalah untuk mengetahui adanya siklamat dalam es krim yang melebihi ambang batas yang dipersyaratkan. Jenis penelitian ini adalah survey deskriptif. Sampel penelitian adalah es krim produksi rumah tangga dari seluruh pedagang es krim di Banjarbaru utara yaitu dengan jumlah 11 pedagang es krim. Variabel dalam penelitian ini adalah kadar siklamat yang terdapat dalam es krim. Hasil penelitian menunjukkan dari 11 sampel es krim yang diperiksa, 9 sampel mengandung siklamat dengan kadar tertinggi 7,37 g/kg sebagai asam siklamat. Kesimpulan penelitian ini adalah es krim yang mengandung siklamat ditemukan sebanyak 82% (9 sampel, sedangkan 18% (2 sampel lainnya negatif, dari 9 sampel yang positif mengandung siklamat, 89% tidak memenuhi syarat PERMENKES Nomor 208 tahun 1985 yaitu melebihi 2 gr/kg sebagai asam siklamat. Perlu dilakukan pemeriksaan yang lebih spesifik untuk analisis kadar siklamat dengan metode lain seperti Kromatografi Cair Kinerja Tinggi (KCKT

  12. ANALISIS OMNICHANNEL CUSTOMER EXPERIENCE MATURITY DI PT. TELEKOMUNIKASI INDONESIA

    Directory of Open Access Journals (Sweden)

    Andreas W. Yanuardi

    2017-02-01

    Full Text Available Customer Experience yang baik mampu meningkatkan kepuasan pelanggan, sehingga membuat pelanggan menjadi setia terhadap penyedia jasa. Pentingnya Customer Experience ini membuat banyak perusahaan ber fokus dalam membangun strategi Customer Experience - nya. Salah satu strategi C ustomer Experience untuk meningkatkan kepuasan pelanggan adalah dengan Omnichannel Customer Experience . Prinsip Omnichannel adalah melakukan integrasi data di semua saluran komunikasi pelanggan sehingga perusahaan mendapatkan pandangan 360 o terhadap pelang gan, atau disebut “ single customer view ”. Integrasi data memungkinkan pelanggan melakukan interaksi dengan perusahaan melalui saluran manapun yang diinginkannya, tanpa harus mengulang informasi ketika ia berpindah saluran. Single customer view kemudian mem ungkinkan perusahaan melakukan personalisasi, yaitu memberikan pelayanan kepada pelanggan secara personal sesuai profil, aktivitas, perilaku, dan ketertarikan pelanggan tersebut. PT Telekomunikasi Indonesia Tbk , sebagai salah satu Communication Service Provider (CSP , telah mengimplementasikan strategi Omnichannel . Penelitian ini bertujuan mengukur maturity level dari implementasi Omnichannel Customer Experience PT Telekomunikasi Indonesia Tbk berdasarkan aspek - aspek dalam Omnichannel Maturity Model , men ggunakan metode expert judgment. Hasil analisis menunjukkan bahwa Telkom telah melakukan inisiasi implementasi Omnichannel Customer Experience dengan diterapkannya platform single window yang terintegrasi di semua saluran pelanggan dan dari sembilan dimensi p engukuran Omnichannel Maturity Model mayoritas sudah berada pada level Cross Channel .

  13. Analisis Kesulitan Belajar Mahasiswa Dalam Memahami Konsep Bilangan Real

    Directory of Open Access Journals (Sweden)

    Lalu Sucipto

    2017-02-01

    Full Text Available [Bahasa]: Penelitian ini bertujuan untuk mengetahui jenis-jenis kesulitan dan faktor-faktor penyebab kesulitan yang dihadapi oleh mahasiswa dalam mengerjakan soal bilangan real. Penelitian ini merupakan penelitian kualitatif dengan menggunakan analisis deskriptif. Data dikumpulkan melalui observasi, tes dan wawancara. Hasil tes dikelompokkan berdasarkan tujuh kategori kesalahan Watson kemudian dilakukan wawancara untuk mengklarifikasi kesalahan tersebut.Hasil penelitian ini menunjukkan bahwa jenis kesalahan yang dominan terjadi pada jawaban mahasiswa berupa jenis kesalahan data tidak tepat, prosedur yang tidak tepat, konflik level respon, dan masalah hirarkhi keterampilan. Kesalahan mahasiswa dalam mengerjakan soal memberikan gambaran kesulitan yang dialami dalam memahami konsep bilangan real. Faktor yang mempengaruhi kesulitan mahasiswa yaitu: materi yang sulit dipahami dan diaplikasikan dalam pemecahan masalah; dan faktor pribadi yang mencakup pola belajar yang tidak baik, sarana pendukung, dan faktor dosen. [English]: This research aims to identify undergraduate students’ difficulties and the factors which caused them in solving real analysis problems. This qualitative research applies descriptive analysis. Data is collected through observation, test, and interview. Students’ answers on test are categorized into Watson’s seven categories of errors then the students are interviewed to clarify the errors. This research reveals that dominant errors encounterd by the students are inappropriate data, inappropriate procedure, response level conclict, and skill hierarchy problem. The errors portrait the difficulties the students encountered. The factors which cause the difficulties are the material is hard to understand and apply to problem solving; and personal factor such as bad learning habits, supporting tools, and the lecturers.

  14. ANALISIS STRUKTUR KEUANGAN TERHADAP PROFITABILITAS PADA PT TELKOMINDONESIA, Tbk MAKASSAR

    Directory of Open Access Journals (Sweden)

    Agustina Merdekawati

    2017-05-01

    Methods of analysis used in this research is the analysis of the ratio of four aspects: Assets measured by the ratio Turnover Total Assets and ratios Turnover Fixed Assets, aspects of liquidity is measured by current ratio, quick ratio and cash ratio, Aspect Equity is measured by the ratio On the equity and debt aspects of Profitability measured by the ratio Profit Margin, Economic Profitability ratios, profitability ratios Equity and Net Profit Margin.

  15. Analisis Kelayakan Finansial dan Non Finansial pada Usaha Kopra di Desa Siduwonge Kecamatan Randangan Kabupaten Pohuwato

    Directory of Open Access Journals (Sweden)

    Yuriko Boekoesoe

    2015-04-01

    Full Text Available The purpose of this study were: 1. To determine whether the copra business financially worth the effort in the Village District of Randangan Siduwonge Pohuwato. 2. To determine whether the effort is worth the effort copra nonfinancial Siduwonge Village District of Randangan Pohuwato. This study was conducted in May to July. This type of research is survey research. The data obtained in this study is that the data in the form of primary and secondary data. Sampling will be done against the 30 respondents using purposive sampling. The analysis used is the financial analysis of the Net Present Value (NPV, Internal Rate of Return (IRR, Gross B / C Ratio, Net B / C Ratio and Payback Period. The results showed 1. Financially copra business in the Village District of Randangan Pohuwato Siduwonge worth the effort with 9.2 Million NPV, IRR (20.11%, Gross B / C ratio (1.27, Net B / C ratio (3.38 and payback period of 7 years 6 months. 2. In non-financial businesses in the village copra Siduwonge District of Randangan Pohuwato divided on several aspects which are as follows: a. Aspects of the Market. In a marketing system for businesses in the Village Siduwonge copra, farmers sell directly to buyers who typically have long subscription. Where the buyer directly come to the farmers who sell the copra. b. Technical Aspects. In this technical aspect of the farmers in the village siduwonge almost all have their own land as many as 25 people, but there are also some who rent land that is 5 people. c. Management aspects. In the management aspect of the planning is done before the process of harvesting coconuts into copra to be produced, the farmers in the village siduwonge not incorporated in the organization and for the direction and supervision in accordance with the land held by the copra farmers and for supervision also aims to work performed by farm workers in accordance with a predetermined agreement.

  16. Industrial espionage and technical surveillance counter measurers

    CERN Document Server

    Androulidakis, Iosif

    2016-01-01

    This book examines technical aspects of industrial espionage and its impact in modern companies, organizations, and individuals while emphasizing the importance of intellectual property in the information era. The authors discuss the problem itself and then provide statistics and real world cases. The main contribution provides a detailed discussion of the actual equipment, tools and techniques concerning technical surveillance in the framework of espionage. Moreover, they present the best practices and methods of detection (technical surveillance counter measures) as well as means of intellectual property protection.

  17. ANALISIS DESAIN PROSES SISTEM PENDINGIN PADA REAKTOR RISET INOVATIF 50 MW

    Directory of Open Access Journals (Sweden)

    Sukmanto Dibyo

    2015-03-01

    Full Text Available Reaktor Riset Inovatif (RRI merupakan jenis MTR (Material Testing Reactor yang dipersiapkan ke depan sebagai desain reaktor baru. Daya RRI telah ditetapkan dari perhitungan neutronik dan termohidrolika teras yaitu 50 MW termal. Reaktor bertekanan 8 kgf/cm2 dan laju aliran massa pendingin primer 900 kg/s. Tantangan yang penting dalam menindak lanjuti desain reaktor ini adalah analisis desain pada sistem pendingin. Makalah ini bertujuan untuk menganalisis desain proses sistem pendingin utama reaktor RRI daya 50 MW (RRI-50 dengan menggunakan program Chemcad 6.1.4. Dalam analisis ini dilakukan perhitungan neraca massa dan energi (mass/energy balances pada sistem pendingin primer dan sekunder sebagai pendingin utama. Masing-masing sistem pendingin tersebut terdiri dari 2 jalur beroperasi secara paralel dan 1 jalur redundansi. Disamping itu untuk desain termal unit komponen telah dianalisis dengan program RELAP5, frenchcreek dan Metoda Analitik. Hasil analisis yang diperoleh adalah desain diagram sistem pendingin yang mencakup data parameter entalpi, temperatur, tekanan dan laju aliran massa pendingin untuk masing-masing jalur. Adapun hasil desain unit komponen utama pada RRI-50 adalah tangki tunda dengan volume 51,5 m3, 2 unit pompa sentrifugal dan 1 unit pompa cadangan pada pendingin primer daya 141 kW/pompa dan pendingin sekunder daya 206 kW/pompa, 2 unit penukar panas tipe shell-tube dengan koefisien termal overall 1377 W/m2.oC dan 4 unit menara pendingin yang mampu melepaskan panas ke udara dengan desain temperatur approach 5,0 oC dan temperatur range 9,0 oC. Desain sistem pendingin reaktor RRI-50 ini telah menetapkan parameter operasi sistem pendingin yaitu temperatur, tekanan dan laju aliran massa pendingin dengan mempertimbangkan tuntutan aspek keselamatan teras reaktor sehingga desain temperatur maksimum pendingin masuk ke teras 44,5 oC. Kata kunci : RRI 50 MW, desain sistem pendingin, program Chemcad 6.1.4   Innovative Research Reactor RRI

  18. Analisis Zona Permeabel Fluida Sistem Panas Bumi Gunungapi Slamet Berdasarkan Analisis Kerapatan Kelurusan Citra SRTM Dan Struktur Geologi

    Directory of Open Access Journals (Sweden)

    Sachrul Iswahyudi

    2016-03-01

    Full Text Available Keberadaan manifestasi panasbumi di sekitar Gunungapi Slamet tidak dapat dipisahkan dari zona-zona permeabilitas yang berkembang. Lokasi-lokasi lulus air tersebut (zona permeabel yang memungkinkan terbentuknya sirkulasi fluida tempat air masuk untuk mengisi reservoir panas bumi dan air keluar ke permukaan bumi sebagai manifesatasi mata air panasbumi di sekitar Gunungapi Slamet. Publikasi yang berupa hasil penelitian ini mencoba mengidentifikasi zona-zona permeabel tersebut berdasarkan anaslisis kerapatan kelurusan yang terekam dalam citra SRTM. Identifikasi kelurusan-kelurusan pada citra berdasarkan komponen-komponen interpretasi citra, yaitu tona, tekstur, pola, bentuk dan relief. Hasil analisis tersebut dikompilasi dengan data struktur geologi regional yang sebelumnya telah diidentifikasi dan data lapangan berupa manifestasi mata air panas. Lokasi-lokasi dengan kerapatan kelurusan yang tinggi pada citra SRTM umumnya bersesuaian dengan zona struktur geologi regional keberadaan manifestasi mata air panas. Daerah tersebut memanjang relatif utara-selatan di bagian barat dan timur-barat di bagian selatan peta. Daerah-daerah inilah yang merupakan daerah lulus air tempat fluida bersirkulasi membentuk sistem panasbumi Gunungapi Slamet.

  19. Analisi della qualità in biblioteca: la soluzione SiMonLib™@CASPUR

    Directory of Open Access Journals (Sweden)

    Ugo Contino

    2011-12-01

    Full Text Available ItLa raccolta periodica di dati e l’analisi delle performance, in un’ottica di valutazione della Qualità del Servizio, sono sicuramente elementi rilevanti per coloro che s’interessino della gestione di una biblioteca o di un sistema bibliotecario. Modi sempre più efficienti e ottimizzati per gestire specifiche campagne di raccolta dati non possono prescindere dall’uso di strumenti in ambito ICT, soprattutto per far fronte ai non banali problemi logistico organizzativi che simili attività di raccolta dati possono comportare. In quest’ambito merita sicuramente menzione SimonLib™, un software prodotto dalla XSystems di Cagliari e pensato per gestire i processi di raccolta dati e misura della qualità in biblioteca, sia essa singola o appartenente ad un sistema. Conscio delle potenzialità offerte da questa piattaforma, il CASPUR ha sottoscritto recentemente un accordo con XSystems per offrire SimonLib alla comunità delle biblioteche italiane, sia pubbliche che private. Il servizio offerto, SiMonLib@CASPUR, installato all’interno di un’infrastruttura di server virtuali (Service Cloud presso il CED del CASPUR, prevede l’accesso in piattaforma in modalità SaaS (Software as a Service, che garantisce le piene funzionalità del servizio ad un costo notevolmente contenuto.EnLibrarians and managers of a library system have to face with relevant problems when service quality measurement in libraries is concerned. The usage of ICT based solutions for measurement campaign, data assessment and analysis, seems to be an efficient way to cope with those issues. In the past few years a software company from Cagliari (XSystems has introduced a complete, web based software solution for quality measurement in a library or a library system, called SimonLib™, that can easily address the typical technical and logistic obstacles of complex service quality measurement process. In order to offer a reliable service based on SimonLib software for

  20. Analisis Kompetensi Kewirausahaan Industri Kecil Suku Cadang di Kota Padang

    Directory of Open Access Journals (Sweden)

    Prima Fithri

    2016-05-01

    Full Text Available As economic development and current technology, there tends to SMEs have been reversed there is some effort to close down due to lack of existing orders in the business. Therefore, the government made efforts to assist existing SMEs to be able to survive in the face of global crisis is happening right now. These efforts may include providing small loans and may include training services in accordance with its business. One of the materials provided in the training is about entrepreneurship so that SMEs are expected to compete with similar companies. The low ability entrepreneur pointed out as one of the reasons SMEs are not able to compete with large companies, such as SI (Small Industry Spare Parts in the city of Padang. The failure to penetrate IK Parts of competition to supply spare parts in the PT. Semen Padang because of its low ability entrepreneur is owned by SI. With no indicator of entrepreneur ability, there are some problems for governments about policies that will be taken for judge the SI. Therefore, the entrepreneur ability should be decided to helps government in decisions making of policies, so that SI can be competing with larger companies. The method that been used in this study is the Quality Function Deployment (QFD and the recommendations for policies that can be used by the government by using SWOT analysis. QFD is used to identify consumer needs and its association with the characteristic techniques provided by the government, so that the final results are the critical competencies that should be developed first. The linkage between the needs of consumers with technical characteristics reflected in the House of Quality (HOQ. While the results of the SWOT analysis are four types of strategies which can be used later by using the strategy outlined in the strategy implementation architecture for 10 years. This research resulted in 25 indicators of entrepreneurial competencies that include Human Resources (HR, financial, and

  1. Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung Di Kota Bengkulu

    Directory of Open Access Journals (Sweden)

    Jaka A. I. Paski

    2018-01-01

    Citation: Paski, J.A.I., Faski, G.I.S.L., Handoyo, M.F. dan Pertiwi, D.A.S. (2017. Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung di Kota Bengkulu. Jurnal Ilmu Lingkungan, 15(2, 83-89, doi:10.14710/jil.15.2.83-89

  2. ANALISIS RASIO ALTMAN MODIFIKASI PADA PREDIKSI KEBANGKRUTAN PERUSAHAAN PROPERTY DAN REAL ESTATE YANG TERDAFTAR DI BEI

    OpenAIRE

    Anita Tri Widiyawati; Supri Wahyudi Utomo; Nik Amah

    2015-01-01

    Penelitian ini bertujuan untuk mengetahui pengaruh rasio Altman Modifikasi terhadap prediksi kebangkrutan. Jenis penelitian ini termasuk penelitian kuantitatif. Populasi dalam penelitian ini adalah perusahaan property dan real estate yang terdaftar di BEI. Teknik pengambilan sampel menggunakan purposive sampling sehingga diperoleh sampel sejumlah 32 perusahaan property dan real estate yang menerbitkan laporan keuangannya selama tahun 2011-2013. Teknik analisis data menggunakan regresi logisti...

  3. Analisis Perbandingan Material Slab Beton Pada Perkerasan Apron Dengan Menggunakan Program Bantu Elemen Hingga

    Directory of Open Access Journals (Sweden)

    Hendrawan Setyo Warsito

    2016-04-01

    Full Text Available Kekuatan slab beton sangat dipengaruhi oleh jenis material yang dipakai. Jenis material yang dimaksud adalah material beton dengan menggunakan PC (Portland Cement dan penggunaan geopolimer dalam komposisi campuran slab beton. Beton geopolimer merupakan beton yang ramah lingkungan. Permasalahan lain yang timbul adalah letak roda pesawat tidak selalu berada pada titik yang sama disuatu permukaan slab beton apron. Pada tugas akhir ini dimaksudkan untuk menganalisis suatu slab beton yang dibebani roda pesawat dengan campuran variasi material beton dan variasi letak roda pesawat pada slab beton dengan program bantu metode elemen hingga. Dengan data pergerakan pesawat, spesifikasi apron bandara Juanda kondisi eksisting. Dilakukan perhitungan tebal slab beton menggunakan software FAARFIELD dan diperoleh tebal slab beton sebesar 442,5 mm. Dari analisis program bantu elemen hingga dapat diperoleh tegangan pada slab beton yang ditimbulkan oleh pembebanan roda pesawat. Hasil validasi dari analisis tegangan menggunakan program bantu elemen hingga dengan analisis Westergaard yaitu memiliki nilai tegangan yang hampir sama pada ketebalan slab beton 450mm. Nilai tegangan tiap-tiap material beton menunjukan nilai tebal slab beton yang diijinkan untuk tipe pesawat tertentu. Dari analisis menggunakan program bantu elemen hingga tebal slab beton yang diijinkan untuk material slab beton PC yaitu sebesar 425mm. Sedangkan untuk material beton geopolimer yaitu sebesar  415 mm.

  4. Analisis Faktor Pembentuk Ekuitas Merek Toyota dan Daihatsu di Indonesia (Studi Komparasi pada Masyarakat Bandung)

    OpenAIRE

    Sigiro, Cristine Afriani; Rachma Putri, Yuliani; Ilfandy Imran, Ayub

    2016-01-01

    Toyota dan Daihatsu merupakan dua merek otomotif (mobil) yang sangat fenomenal di kalangan masyarakat Indonesia. Produk dari kedua merek tersebut memiliki persamaan yang identik, namun Toyota memasarkan produknya lebih mahal dibandingkan Daihatsu. Tujuan penelitian ini untuk mengetahui perbandingan ekuitas merek Toyota dan Daihatsu menurut masyarakat Bandung. Penelitian ini menggunakan paradigma penelitian positivistik dengan metode penelitian studi komparatif melalui teknik analisis data yan...

  5. ANALISIS PENGARUH CUSTOMER RELATIONSHIP MANAGEMENT TERHADAP KEPUASAN PELANGGAN PADA PT TELKOMSEL DI MAKASSAR

    OpenAIRE

    ANANDA, RACHMA RESKY

    2015-01-01

    2015 Analisis Pengaruh Customer Relationship Management Terhadap Kepuasan Pelanggan Pada PT Telkomsel di Makassar Analysis of Customer Relationship Management Influence to Customer Satisfaction at PT Telkomsel in Makassar Rachma Resky Ananda Muh. Asdar Yansor Djaya Tujuan dari penelitian ini adalah untuk menganalisis pengaruh Customer Relationship (continuity marketing, one to one marketing dan partnering atau co-marketing) terhadap k...

  6. Strategy of technical innovation

    International Nuclear Information System (INIS)

    Lee, Ga Jong

    1990-12-01

    This book deals with policy of scientific technique and technical innovation such as research for development and types of technical innovation, historical development and process of technical innovation, economic growth, technology change and investment for research and development, structure and form of technical transfer with the meaning process, from, structure and theory, economic growth and investment of research and development with experiential analysis and case study on strategy of technical innovation in electron and fine chemical industry.

  7. Urology technical and non-technical skills development: the emerging role of simulation.

    Science.gov (United States)

    Rashid, Prem; Gianduzzo, Troy R J

    2016-04-01

    To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including

  8. APLIKASI METODE-METODE AGGLOMERATIVE DALAM ANALISIS KLASTER PADA DATA TINGKAT POLUSI UDARA

    Directory of Open Access Journals (Sweden)

    Dewi Rachmatin

    2014-09-01

    Full Text Available ABSTRAK   Analisis Klaster merupakan analisis pengelompokkan data yang mengelompokkan data berdasarkan informasi yang ditemukan pada data. Tujuan dari analisis klaster adalah agar objek-objek di dalam satu kelompok memiliki kesamaan satu sama lain sedangkan dengan objek-objek yang berbeda kelompok memiliki perbedaan. Analisis klaster dibagi menjadi dua metode yaitu metode hirarki dan metode non-hirarki. Metode hirarki dibagi menjadi dua, yaitu metode agglomerative (pemusatan dan metode divisive (penyebaran. Metode-metode yang termasuk dalam metode agglomerative adalah Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method. Pada artikel ini dibahas metode-metode agglomerative tersebut yang diterapkan pada data tingkat polusi udara. Masing-masing metode tersebut memberikan jumlah klaster yang berbeda.   Kata Kunci : Analisis Klaster, Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method.     ABSTRACT Cluster analysis is an analysis of the data classification based on information found in the data.The objective of cluster analysis is that the objects in the group have in common with each other, while the different objects have different groups. Cluster analysis is divided into two methods : the method of non-hierarchical and hierarchical methods.Hierarchical method is divided into two methods, namely agglomerative methods (concentration and divisive methods (deployment. The methods included in the agglomerative method is Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward 's Method, Method and Median Centroid Method. In this article discussed the agglomerative methods were applied to the data rate of air pollution. Each of these methods provides a different number of clusters.   Keywords: Cluster Analysis , Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward

  9. Kembalikan Lagu Anak-anak Indonesia: Sebuah Analisis Struktur Musik

    Directory of Open Access Journals (Sweden)

    Ardipal - -

    2015-12-01

    . Yaitu musik sebagai pengembangan seni di lingkungan tertentu  dan musik sebagai seni komersial. Dari sisi musik komersial, hampir dua dekade terakhir  ini lagu anak-anak menghilang di media massa. Digantikan oleh lagu orang dewasa. Hal ini tentu mempengaruhi perkembangan psikologis, fisik, dan mental anak-anak. Secara teoritik, masalah ini hal ini dapat ditinjau dari produksi musik melalui pendekatan (1 konfik (hegemoni dan (2 interpretasi/makna. Penelitian ini bertujuan untuk membandingkan struktur musik lagu anak-anak dan struktur musik orang dewasa. Data diambil dari lagu anak-anak dan lagu pop orang dewasa. Metoda analisis difokuskan pada fitur lagu berdasarkan struktur musik dan dampaknya. Instrumen kunci dalam penelitian adalah peneliti sendiri dan instrumen pembantu berupa panduan kodifikasi data. Kemudian mendeskripsikan unsur-unsur tersebut yang terdapat dalam beberapa lagu anak-anak dan dewasa. Untuk menjaga keabsahan data, dilakukan kegiatan triangulasi data. Kegiatan analisis data dimulai dari tahap memilih dan mengodifikasi data, menganalisis data sesuai dengan fitur musiknya masing-masing, dan tahap menarik kesimpulan serta verifikasi. Dari data lagu yang diambil sebagai sampel penelitian, terlihat bahwa pola ritmis, melodis, interval, tempo, hingga rentang nada belum laik  dinyanyikan oleh anak-anak. Pemaksaan anak-anak untuk meniru lagu tersebut dapat berakibat fatal seperti kerusakan pita suara, kram otot rahang. Akhirnya, disarankan agar partisipan seni, dan juga Demikian juga jaringan infrastuktur seni, harus dapat memiliki pandangan yang sama dan kuat  dalam pengembangan seni musik di Indonesia, khususnya untuk lagu anak-anak. Kata Kunci: lagu anak-anak, lagu perjuangan, lagu orang dewasa, struktur musik

  10. Analisis Penerapan E-Government di Kabupaten Sragen

    Directory of Open Access Journals (Sweden)

    Yan Andriariza AS

    2013-09-01

    Full Text Available ABSTRAK Kabupaten Sragen merupakan salah satu pemerintah kabupaten yang menerapkan e-government dengan baik, dan merupakan kabupaten yang menjadi percontohan dalam suksesnya penerapan e-government. Karenanya perlu untuk dilakukan analisis penerapan e-government di Kabupaten Sragen, sebagai contoh bagi daerah lain dalam membangun e-government di daerah tersebut. Analisa yang dilakukan antara lain melihat seberapa jauh penerapan G2C, G2B dan G2G di Pemerintah Kabupaten Sragen. Selain itu juga dilakukan analisa menggunakan The UN Web Measure Index, dan analisa terakhir melakukan analisa deskriptif untuk 5 faktor kesuksesan penerapan e-government, yaitu Hukum dan Peraturan, Struktur Organisasi, Proses Bisnis, Teknologi Informasi dan Visi, Objektif dan Strategi. Dari hasil analisis diperoleh kesimpulan bahwa Kabupaten Sragen telah menerapkan G2B dan G2G, serta berada pada tahap awal penerapan G2C, selain itu Kabupaten Sragen juga telah mencapai pemerintahan yang online, tanpa kertas dan transparan. Implementasi e-government di kabupaten Sragen tersebut dapat dikatakan sukses karena telah memenuhi beberapa faktor dalam mencapai kesuksesan implementasi e-government, yaitu hukum dan peraturan, struktur organisasi, teknologi informasi dan visi, objektif dan strategi. Bila dilihat berdasarkan UN Web Measured Index, Kabupaten Sragen telah mencapai tahap 4. Saran yang dapat diberikan melalui penelitian ini adalah untuk unit kerja yang menangani TIK di Kabupaten Sragen akan lebih baik bila dipegang oleh unit kerja setingkat eselon 2 dan perlunya SOP dan peraturan tambahan terkait TIK di Kabupaten Sragen. ABSTRACT Sragen is one of the districts that implement well e-government, and being a model for the successful implementation of e-government. It is necessary to do the analysis of the application of e-government in Sragen, as an example for other regions in developing e-government in the area. Analysis was carried out to see how far the application of G2C

  11. Analisis Karaterisasi Konsentrasi dan Komposisi Partikulat Udara (Studi Case : Surabaya

    Directory of Open Access Journals (Sweden)

    Eka Fithriani Ahmad

    2016-12-01

    Full Text Available Abstrak Pencemaran udara merupakan dampak yang sangat merugikan, tidak hanya bagi manusia tetapi juga akan berdampak buruk bagi ekosistem hewan dan tumbuhan. Pada penelitian ini akan mengkaji pencemaran udara dari Oktober 2012 hingga Februari 2014 melalui penelitian konsentrasi dan komposisi dari partikulat udara dengan ukuran PM 2.5. Penelitian ini bertujuan untuk menentuan sumber asal pencemaran di Surabaya sehingga dapat dijadikan referensi berbasis ilmiah sebagai langkah untuk membuat keputusan dan kebijakan yang tepat dalam menanggulangi dampak pencemaran. Metode pengolahan data dalam penelitian ini adalah dengan menggunakan analisis reseptor modeling yaitu Positif Matrix Factorization (PMF untuk mengetahui sumber asal pencemaran. Hasil pengukuran yang diperoleh pada konsentrasi PM 2,5 adalah 15.05 μg/m3 sehingga telah melebihi baku mutu tahunan yang telah ditetapkan PP 41 tahun 1999, USEPA, maupun WHO. Dalam partikulat terdapat konsentrasi black carbon (BC sebesar 3.20 μg/m3 dan unsur Pb dengan konsentrasi 0.28 μg/m3 yang telah melebihi nilai baku mutu USEPA. Sedangkan hasil analisis reseptor modeling di dapatkan sumber asal polutan berasal dari biomass, vehicle, soil, industri Pb, industri Zn dan indutri Fe. Kata kunci: Partikulat mater 2.5, black carbon, Pb, positive matrix factorization, Surabaya   Abstract Air pollution is a very adverse impact, not only for humans but also the ecosystem of plants and animals. This research examine air pollution from October 2012 until February 2014 through the research of concentration and composition of airborne particulates with a size of PM 2.5 μm. This study aims to determine the origin and location of pollution sources in Surabaya so that it can be used as scientific reference as a step to make the right decisions and policies in tackling the impact of pollution. Data processing method in this research used analysis of receptor modeling that is Positive Matrix Factorization (PMF to determine

  12. ANALISIS POTENSI RETRIBUSI PELAYANAN PASAR DI KABUPATEN KENDAL

    Directory of Open Access Journals (Sweden)

    Herru Dwi Haryono

    2017-06-01

    Full Text Available Selama periode 2008-2012, realisasi retribusi pelayanan pasar ini mengalami tren naik turun. Sedangkan dari target yang ditentukan dalam komponen retribusi pelayanan pasar yakni retribusi pasar, retribusi sampah/kebersihan dan retribusi sewa kios rata-rata selalu terealisasi melebihi target. Penelitian ini bertujuan untuk mengetahui potensi retribusi pelayanan pasar di Kabupaten Kendal dan apakah target yang ditentukan sudah berdasarkan potensi yang ada. Data yang digunakan dalam penelitian ini adalah data sekunder. Data sekunder dalam penelitian ini berupa data yang bersumber dari BPS Kabupaten Kendal, DPPKAD    Kabupaten Kendal, Disperindag  Kabupaten  Kendal dan  UPTD Dinas  Pasar Kabupaten  Kendal.  Metode analisis yang digunakan yakni analisis deskriptif yakni menghitung potensi retribusi pelayanan pasar di Kabupaten Kendal dan membandingkan potensi dengan target dan apakah target yang ditentukan sesuai berdasarkan potensi yang ada. Hasil penelitian menunjukkan bahwa (1 potensi retribusi pelayanan pasar di Kabupaten Kendal sebesar Rp.5.130.789.600 pertahun. (2 target retribusi pelayanan pasar di Kabupaten Kendal selalu berada dibawah potensi yang ada, jadi kesimpulannya bahwa mekanisme penentuan target tidak berdasarkan potensi yang ada. Berdasarkan hasil anasilis data tersebut, saran yang dapat disampaikan adalah agar pemerintah daerah ataupun pengelola pasar dapat memanfaatkan secara maksimal potensi yang ada agar realisasi penerimaan retribusi pelayanan pasar dapat ditingkatkan lagi dan hendaknya mengevaluasi mekanisme penetapan target berdasarkan potensi yang ada agar kinerja pemerintah maupun pengelola pasar dapat ditingkatkan lagi yang akan berdampak pada realisasi penerimaan retribusi pelayanan pasar. During the period 2008-2012, the actual levy of service this market has been trending up and down. While the targets specified in the component market services levy market fees, garbage fees / levies hygiene and the average

  13. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI IMPOR BAJA DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Jhonson Agustinus Pasaribu

    2017-06-01

    Full Text Available Impor baja terus mengalami peningkatan dari tahun 1980-2012, hal ini disebabkan karena tingkat produksi baja tidak mampu mengimbangi dan memenuhi tingkat konsumsi baja. Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi impor baja di Indonesia. Metode analisis yang digunakan adalah Error Corection Model (ECM. Pengujian secara parsial digunakan uji t-statistik dan pengujian secara serempak digunakan uji F-statistik. Hasil penelitian ini menunjukan bahwa Produksi baja berpengaruh negatif dan signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Konsumsi baja menunjukan pengaruh positif dan signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Gross Domestic Product (GDP menunjukan pengaruh yang negatif dan tidak signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Nilai tukar rupiah (Kurs menunjukan pengaruh yang positif dan tidak signifikan terhadap impor baja dalam jangka panjang dan jangka pendek.  The steel import keep having enhancement from 1980 to 2012, it’s because of steel production level can’t fulfill the steel consumption level. If the high level of the steel import volume continues, domestic steel industries will run into a low impact for Indonesian’s economy. The goal of this research analize the affecting factors of steel import in Indonesia. The analytical method use the Error Correction Model (ECM. The partial test use t-statistic and the simultan test use F-statistic. The results showed that the steel production has negative and significant effect on steel import in the long term and short term. The steel consumption has positive and significant effect on steel import in the long term and short term. The Gross Domestic Product (GDP has negative and not significant effect on steel import in the long term and short term. The exchange rate indicates positive and not significant effect on steel import in the long term and short term.

  14. ANALISIS REKRUITMEN TENAGA PENDIDIK PADA SD KALAM KUDUS PEKANBARU

    Directory of Open Access Journals (Sweden)

    Murnawati Murnawati

    2015-04-01

    Full Text Available Abstrak: Penelitian ini dilakukan untuk mengetahui sistem rekrutmen tenaga pendidik pada SD kalam kudus kota Pekanbaru. Populasi dalam penelitian ini adalah tenaga pendidik di SD Kalam Kudus Kota Pekanbaru, kebutuhan guru sebanyak 65 sedangkan guru tetap sebanyak 40 guru dan sisanya guru honor sebanyak 25 guru. Dalam penelitian ini penulis mengambil sampel seluruh populasi. Pengambilan sampel dilakukan secara sensus. Data yang digunakan adalah data primer yang diperoleh dari wawancara langsung dan penyebaran kuesioner. Analisis data dalam penelitian ini adalah menggunakan metode deskriptif. Berdasarkan hasil penelitian dapat disimpulkan bahwa persyaratan administrasi dalam rekruitmen guru diperoleh rata – rata skor sebesar 3,49. Artinya persyaratan administrasi dalam rekruitmen guru pada SD Kalam Kudus Pekanbaru dinilai baik. Abstract: This research aimed to determine the system of teachers’s recruitment in Kalam Kudus elementary school of Pekanbaru. The population in this study were educators in in Kalam Kudus elementary school of Pekanbaru, the teacher needs as much as 65 while the teacher remains as much as 40 teachers and teacher salaries remaining 25 teachers. In this study the authors took samples of the entire population. Sampling was done by census. The data used is primary data obtained from interviews and questionnaires. Data analyzed by descriptive method. Based on the results of this study concluded that the administrative requirements for the recruitment of teachers obtained average - average score of 3.49. This means that the administrative requirements for the recruitment of teachers in elementary Holy Kalam Pekanbaru considered good. Kata Kunci : Rekruitmen, Tenaga Pendidik

  15. ANALISIS EFEKTIVITAS PEMBERIAN PINJAMAN PROGRAM PEMBIAYAAN UMKM OLEH KOPERASI

    Directory of Open Access Journals (Sweden)

    Hadi Ismanto

    2014-10-01

    Full Text Available Abstrak: Analisis Efektivitas Pemberian Pinjaman Program Pembiayaan UMKM Oleh Koperasi. Program Pembiayaan memiliki peran yang penting bagi UMKM, namun sering menghadapi masalah penunggakan dan kemacetan pembayaran angsuran. Penelitian ini berupaya untuk mengetahui sebab-sebab tidak lancarnya pengembalian Program Pembiayaan UJKS sehingga diharapkan dapat menyusun strategi yang lebih baik lagi dalam menyeleksi calon peminjam agar angka pinjaman bermasalah dapat ditekan. Populasi dalam penelitian ini adalah semua UMKM yang menjadi Peminjam (peminjam program pembiayaan UJKS Mitra Usaha dan masih tergolong aktif hingga bulan November 2013 dan telah memperoleh fasilitas pembiayaan sekurang-kurangnya enam bulan berjalan. Penelitian ini menemukan bahwa faktor-faktor yang berpengaruh positif terhadap tingkat pengembalian pinjaman (lancar atau menunggak adalah omzet usaha, lama usaha dan nilai plafon pinjaman. Hal ini dapat dijadikan bahan pertimbangan bagi UJKS dalam menjalankan program pembiayaan sehingga menjadi lebih efektif dalam menjalankannya.   Kata Kunci: UMKM, UJKS, Program Pembiayaan, Lancar, dan Macet.   Abstract: Effectiveness Analysis of SMEs Financing Program by Cooperative. Financing programs have an important role to SMEs, but often face the problem of repayment failures and installment payments. This study examines the causes of saving and loan cooperatives’ repayment problems. The population of this study is all SMEs borrowing from Mitra Usaha saving and loan cooperative. Furthermore these SMEs must be categorized as active SMEs until November 2013 and they had been receiving loan for at least six months. The study found that the variables such as: the length of the business, the business volume, and the value of the loan have a positive impact on repayment rate.   Keywords: SMEs, Saving and Loan Cooperative, Financing Program

  16. Analisis Kinerja Penerapan Container untuk Load Balancing Web Server

    Directory of Open Access Journals (Sweden)

    Muhammad Agung Nugroho

    2016-12-01

    Full Text Available Container merupakan teknologi virtualisasi terbaru. Container memudahkan system administrator dalam mengelola aplikasi pada server. Docker container dapat digunakan untuk membangun, mempersiapkan, dan menjalankan aplikasi. Dapat membuat aplikasi dari bahasa pemrograman yang berbeda pada lapisan apapun. Aplikasi dapat di bungkus dalam container, dan aplikasi dapat berjalan pada lingkungan apapun dimana saja.  Dalam perkembangannya container ini dapat digunakan untuk load balancing, dengan memanfaatkan HA Proxy. Load Balancing dapat digunakan untuk menyelesaikan permasalahan beban kinerja web server yang terlalu berat (overload terhadap permintaan. Load Balancing merupakan salah satu metode untuk meningkatkan skalabilitas web server sekaligus mengurangi beban kerja web server. Ujicoba dilakukan dengan memberikan beban request pada single container dan multi container, dan membandingkan kinerjanya. Analisis kinerja dapat dilakukan dengan menggunakan parameter performance pada processor, memori dan proses layanan. Penerapan ujicoba dilakukan pada raspberry pi. Hasil yang diperoleh multi container dapat digunakan untuk mengembangkan metode load balancing, hasil ujicoba menunjukkan performance raspberry pi dapat optimum karena pembagian beban processor.

  17. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI PENERIMAAN PAJAK

    Directory of Open Access Journals (Sweden)

    Phany Ineke Putri

    2013-09-01

    Full Text Available The purpose of this study was to analyze the influence of population, income per capita, inflation and the number of Trade Permit toward billboard tax revenue in Purbalingga. The results of this study is expected to provide benefit and input to the Local Government of Purbalingga, especially Departement of management of financial income and regional asset. Analysis tool used is multiple linear regression (Multiple Linear Regression Method by the method of least squares Ordinary Least Square (OLS. Jointly test results showed that overall independent variables (population, income per capita, inflation, and the number of trade permit together to show their effects on the billboard tax revenue. Adjusted R-Squared value of 0,951, which means 95,1 percent of the four independent variables. While the remaining 4,9 percent is explained by other causes outside the model. The results showed that the per capita income variable and the number of trade permit have a significant positive effect, the inflation variable has a significant negative effect, whereas a number of population variable have a positive effect which is not significant at α = 5 percent of tax revenue in Purbalingga billboard. Tujuan dari penelitian ini adalah untuk menganalisis pengaruh jumlah penduduk, pendapatan per kapita, inflasi dan jumlah surat ijin usaha perdagangan (SIUP terhadap penerimaan pajak reklame di Kabupaten Purbalingga. Manfaat penelitian ini diharapkan menjadi bahan masukan Pemerintah Kabupaten Purbalingga khususnya Dinas Pengelolaan, Pendapatan, Keuangan dan Aset Daerah. Teknik analisis yang digunakan adalah regresi berganda dengan metode Ordinary Least Square (OLS. Hasil penelitian menunjukkan ada pengaruh secara bersama-sama variabel jumlah penduduk, pendapatan per kapita, inflasi dan jumlah surat ijin usaha perdagangan terhadap penerimaan pajak reklame. Koefisien determinasi 95,1% dapat dijelaskan oleh variabel independen terhadap variabel dependen, dan sisanya

  18. Analisis Elektron Beam Profile Constancy pada Pesawat Linac

    Directory of Open Access Journals (Sweden)

    Edi Guritna

    2018-02-01

    Full Text Available Radioterapi adalah pengobatan penyakit terutama tumor atau kanker ganas dengan menggunakan radiasi elektromagnetik (Sinar-X dan Gamma dan radiasi partikel (elektron, proton, dan neutron. Salah satu alat radioterapi modern yang digunakan dalam pengobatan penyakit kanker adalah linear accelerator (linac. Alat radioterapi ini menghasilkan elektron dan sinar-X (foton yang dibangkitkan oleh generator dan mempunyai energi yang bervariasi. Dalam penelitian profil dosis, digunakan pesawat liner accelerator (linac Siemens Primus berkas elektron 5 MeV dengan luas lapangan radiasi berkisar dari 5×5 cm2 sampai 25×25 cm2. Pengukuran profil dosis dilakukan dengan menggunakan water phantom,  detektor farmer chamber dan condenser chamber yang dilengkapi dengan  computer control units (CCU serta dilakukan untuk arah crossline dan inline pada kedalaman Dmax dan kedalaman tertentu. Penelitian ini bertujuan untuk menganalisis profil berkas sinar elektron energi 5 MeV pada kedalaman tertentu dan Dmax dengan variasi luas lapangan 5×5 cm2, 10×10 cm2, 15×15 cm2, 20×20 cm2, 25×25 cm2. Hasil analisis profil dosis pada berkas elektron 5 MeV menunjukkan bahwa lapangan 5×5 cm2 memiliki nilai flatness yang cukup besar sehingga dalam kalibrasi maupun terapi radiasi perlu diperhatikan penggunaan  luas lapangan tersebut. Dalam penelitian ini juga didapatkan bahwa nilai flatness paling ideal (nilai flatness rendah terjadi pada lapangan 15×15 cm2. Sehingga ada luas lapangan lain yang bisa digunakan untuk treatment maupun kalibrasi selain 10×10 cm2 yaitu 15×15 cm2 yang memiliki nilai flatness rendah.

  19. ANALISIS STILISTIKA WACANA TERJEMAHAN RESMI NASKAH PRASASTI PLUMPUNGAN (KAJIAN HISTORIS

    Directory of Open Access Journals (Sweden)

    Hristina Nikolic

    2008-12-01

    Full Text Available This article mainly deals with the Plumpungan manuscript discourse, an ancient stone inscription found in the Salatiga area. The manuscript dates back to the 8th century and is one of the main historical sources of the Salatiga municipality. There is a tight connection involving the above mentioned inscription with the legitimacy of the Javanese court at that time, as well as with the monarch, who was seen as half- man, half-deity. The monarch drew on the labor of his subjects in maintaining reli- gious sites to ensure his place on earth, and in heaven. The Plumpungan manuscript was a ‘legal document’ used to reassure inhabitants of the area that the monarch is the legitimate ruler, and to prevent further revolt. The monarch’s subjects in the Salatiga area at the time were farmers disheartened with high taxes and the fear of volcanic eruptions, which later caused great migrations to East Java. Consequently, the mon- arch, using the Plumpungan manuscript as a medium, decreed that the Hampra vil- lage (present-day Salatiga become a tax-free area due to the excellent care that its citizens provided for the religious sites, in addition to the obeisance shown to the monarch. It becomes clear, however, that all the way through the discourse analysis, the king wanted to ensure his legitimacy. Socio-historical context confirms that the monarch, Bhanu, was a successful ruler who held power over four regions, analogi- cally with Indra, the king of all deities. Discourse analysis is detained under three main dimensions, which is grammatical, lexical and contextual, unified from be- ginning to end in a particular style that reveals genuinely hidden meaning.     Key words: manuscript, Plumpungan, kodikologi, dan analisis stilistika.

  20. KONDISI CURAH HUJAN PADA KEJADIAN BANJIR JAKARTA DAN ANALISIS KONDISI UDARA ATAS WILAYAH JAKARTA BULAN JANUARI – FEBRUARI 2013

    OpenAIRE

    Syaifullah, M. Djazim

    2018-01-01

    IntisariKondisi curah hujan di wilayah Jakarta pada kejadian banjir besar tanggal 17 Januari 2013 telah dianalisis yang dihubungkan dengan kondisi atmosfer pada selang waktu tersebut. Data curah hujan menggunakan data TRMM sedangkan analisis kondisi atmosfer menggunakan data rawinsonde. Hasil analisis menunjukkan bahwa puncak kejadian banjir Jakarta musim hujan tahun 2013 terjadi pada tanggal 17 Januari 2013 disebabkan oleh faktor lokal yang sangat kuat ditambah dengan faktor global yang mend...