Guidelines for job and task analysis for DOE nuclear facilities

International Nuclear Information System (INIS)

1983-06-01

The guidelines are intended to be responsive to the need for information on methodology, procedures, content, and use of job and task analysis since the establishment of a requirement for position task analysis for Category A reactors in DOE 5480.1A, Chapter VI. The guide describes the general approach and methods currently being utilized in the nuclear industry and by several DOE contractors for the conduct of job and task analysis and applications to the development of training programs or evaluation of existing programs. In addition other applications for job and task analysis are described including: operating procedures development, personnel management, system design, communications, and human performance predictions

Imaging gait analysis: An fMRI dual task study.

Science.gov (United States)

Bürki, Céline N; Bridenbaugh, Stephanie A; Reinhardt, Julia; Stippich, Christoph; Kressig, Reto W; Blatow, Maria

2017-08-01

In geriatric clinical diagnostics, gait analysis with cognitive-motor dual tasking is used to predict fall risk and cognitive decline. To date, the neural correlates of cognitive-motor dual tasking processes are not fully understood. To investigate these underlying neural mechanisms, we designed an fMRI paradigm to reproduce the gait analysis. We tested the fMRI paradigm's feasibility in a substudy with fifteen young adults and assessed 31 healthy older adults in the main study. First, gait speed and variability were quantified using the GAITRite © electronic walkway. Then, participants lying in the MRI-scanner were stepping on pedals of an MRI-compatible stepping device used to imitate gait during functional imaging. In each session, participants performed cognitive and motor single tasks as well as cognitive-motor dual tasks. Behavioral results showed that the parameters of both gait analyses, GAITRite © and fMRI, were significantly positively correlated. FMRI results revealed significantly reduced brain activation during dual task compared to single task conditions. Functional ROI analysis showed that activation in the superior parietal lobe (SPL) decreased less from single to dual task condition than activation in primary motor cortex and in supplementary motor areas. Moreover, SPL activation was increased during dual tasks in subjects exhibiting lower stepping speed and lower executive control. We were able to simulate walking during functional imaging with valid results that reproduce those from the GAITRite © gait analysis. On the neural level, SPL seems to play a crucial role in cognitive-motor dual tasking and to be linked to divided attention processes, particularly when motor activity is involved.

Considerations for Task Analysis Methods and Rapid E-Learning Development Techniques

Directory of Open Access Journals (Sweden)

Dr. Ismail Ipek

2014-02-01

Full Text Available The purpose of this paper is to provide basic dimensions for rapid training development in e-learning courses in education and business. Principally, it starts with defining task analysis and how to select tasks for analysis and task analysis methods for instructional design. To do this, first, learning and instructional technologies as visions of the future were discussed. Second, the importance of task analysis methods in rapid e-learning was considered, with learning technologies as asynchronous and synchronous e-learning development. Finally, rapid instructional design concepts and e-learning design strategies were defined and clarified with examples, that is, all steps for effective task analysis and rapid training development techniques based on learning and instructional design approaches were discussed, such as m-learning and other delivery systems. As a result, the concept of task analysis, rapid e-learning development strategies and the essentials of online course design were discussed, alongside learner interface design features for learners and designers.

A framework for cognitive task analysis in systems design

International Nuclear Information System (INIS)

Rasmussen, J.

1985-08-01

The present rapid development if advanced information technology and its use for support of operators of complex technical systems are changing the content of task analysis towards the analysis of mental activities in decision making. Automation removes the humans from routine tasks, and operators are left with disturbance control and critical diagnostic tasks, for which computers are suitable for support, if it is possible to match the computer strategies and interface formats dynamically to the requirements of the current task by means of an analysis of the cognitive task. Such a cognitive task analysis will not aim at a description of the information processes suited for particular control situations. It will rather aim at an analysis in order to identify the requirements to be considered along various dimensions of the decision tasks, in order to give the user - i.e. a decision maker - the freedom to adapt his performance to system requirements in a way which matches his process resources and subjective preferences. To serve this purpose, a number of analyses at various levels are needed to relate the control requirements of the system to the information processes and to the processing resources offered by computers and humans. The paper discusses the cognitive task analysis in terms of the following domains: The problem domain, which is a representation of the functional properties of the system giving a consistent framework for identification of the control requirements of the system; the decision sequences required for typical situations; the mental strategies and heuristics which are effective and acceptable for the different decision functions; and the cognitive control mechanisms used, depending upon the level of skill which can/will be applied. Finally, the end-users' criteria for choice of mental strategies in the actual situation are considered, and the need for development of criteria for judging the ultimate user acceptance of computer support is

49 CFR 236.1043 - Task analysis and basic requirements.

Science.gov (United States)

2010-10-01

... Train Control Systems § 236.1043 Task analysis and basic requirements. (a) Training structure and... classroom, simulator, computer-based, hands-on, or other formally structured training designed to impart the... 49 Transportation 4 2010-10-01 2010-10-01 false Task analysis and basic requirements. 236.1043...

49 CFR 236.923 - Task analysis and basic requirements.

Science.gov (United States)

2010-10-01

... for Processor-Based Signal and Train Control Systems § 236.923 Task analysis and basic requirements... structured training designed to impart the knowledge, skills, and abilities identified as necessary to... 49 Transportation 4 2010-10-01 2010-10-01 false Task analysis and basic requirements. 236.923...

5D Task Analysis Visualization Tool Phase II, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The creation of a five-dimensional task analysis visualization (5D-TAV) software tool for Task Analysis and Workload Planning using multi-dimensional visualization...

Final report on the Pathway Analysis Task

International Nuclear Information System (INIS)

Whicker, F.W.; Kirchner, T.B.

1993-04-01

The Pathway Analysis Task constituted one of several multi-laboratory efforts to estimate radiation doses to people, considering all important pathways of exposure, from the testing of nuclear devices at the Nevada Test Site (NTS). The primary goal of the Pathway Analysis Task was to predict radionuclide ingestion by residents of Utah, Nevada, and portions of seven other adjoining western states following radioactive fallout deposition from individual events at the NTS. This report provides comprehensive documentation of the activities and accomplishments of Colorado State University's Pathway Analysis Task during the entire period of support (1979--91). The history of the project will be summarized, indicating the principal dates and milestones, personnel involved, subcontractors, and budget information. Accomplishments, both primary and auxiliary, will be summarized with general results rather than technical details being emphasized. This will also serve as a guide to the reports and open literature publications produced, where the methodological details and specific results are documented. Selected examples of results on internal dose estimates are provided in this report because the data have not been published elsewhere

Final report on the Pathway Analysis Task

Energy Technology Data Exchange (ETDEWEB)

Whicker, F.W.; Kirchner, T.B. [Colorado State Univ., Fort Collins, CO (United States)

1993-04-01

The Pathway Analysis Task constituted one of several multi-laboratory efforts to estimate radiation doses to people, considering all important pathways of exposure, from the testing of nuclear devices at the Nevada Test Site (NTS). The primary goal of the Pathway Analysis Task was to predict radionuclide ingestion by residents of Utah, Nevada, and portions of seven other adjoining western states following radioactive fallout deposition from individual events at the NTS. This report provides comprehensive documentation of the activities and accomplishments of Colorado State University`s Pathway Analysis Task during the entire period of support (1979--91). The history of the project will be summarized, indicating the principal dates and milestones, personnel involved, subcontractors, and budget information. Accomplishments, both primary and auxiliary, will be summarized with general results rather than technical details being emphasized. This will also serve as a guide to the reports and open literature publications produced, where the methodological details and specific results are documented. Selected examples of results on internal dose estimates are provided in this report because the data have not been published elsewhere.

Inter-subject phase synchronization for exploratory analysis of task-fMRI.

Science.gov (United States)

Bolt, Taylor; Nomi, Jason S; Vij, Shruti G; Chang, Catie; Uddin, Lucina Q

2018-08-01

Analysis of task-based fMRI data is conventionally carried out using a hypothesis-driven approach, where blood-oxygen-level dependent (BOLD) time courses are correlated with a hypothesized temporal structure. In some experimental designs, this temporal structure can be difficult to define. In other cases, experimenters may wish to take a more exploratory, data-driven approach to detecting task-driven BOLD activity. In this study, we demonstrate the efficiency and power of an inter-subject synchronization approach for exploratory analysis of task-based fMRI data. Combining the tools of instantaneous phase synchronization and independent component analysis, we characterize whole-brain task-driven responses in terms of group-wise similarity in temporal signal dynamics of brain networks. We applied this framework to fMRI data collected during performance of a simple motor task and a social cognitive task. Analyses using an inter-subject phase synchronization approach revealed a large number of brain networks that dynamically synchronized to various features of the task, often not predicted by the hypothesized temporal structure of the task. We suggest that this methodological framework, along with readily available tools in the fMRI community, provides a powerful exploratory, data-driven approach for analysis of task-driven BOLD activity. Copyright © 2018 Elsevier Inc. All rights reserved.

Task analysis and computer aid development for human reliability analysis in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Yoon, W. C.; Kim, H.; Park, H. S.; Choi, H. H.; Moon, J. M.; Heo, J. Y.; Ham, D. H.; Lee, K. K.; Han, B. T. [Korea Advanced Institute of Science and Technology, Taejeon (Korea)

2001-04-01

Importance of human reliability analysis (HRA) that predicts the error's occurrence possibility in a quantitative and qualitative manners is gradually increased by human errors' effects on the system's safety. HRA needs a task analysis as a virtue step, but extant task analysis techniques have the problem that a collection of information about the situation, which the human error occurs, depends entirely on HRA analyzers. The problem makes results of the task analysis inconsistent and unreliable. To complement such problem, KAERI developed the structural information analysis (SIA) that helps to analyze task's structure and situations systematically. In this study, the SIA method was evaluated by HRA experts, and a prototype computerized supporting system named CASIA (Computer Aid for SIA) was developed for the purpose of supporting to perform HRA using the SIA method. Additionally, through applying the SIA method to emergency operating procedures, we derived generic task types used in emergency and accumulated the analysis results in the database of the CASIA. The CASIA is expected to help HRA analyzers perform the analysis more easily and consistently. If more analyses will be performed and more data will be accumulated to the CASIA's database, HRA analyzers can share freely and spread smoothly his or her analysis experiences, and there by the quality of the HRA analysis will be improved. 35 refs., 38 figs., 25 tabs. (Author)

Initial development of an automated task analysis profiling system

International Nuclear Information System (INIS)

Jorgensen, C.C.

1984-01-01

A program for automated task analysis is described. Called TAPS (task analysis profiling system), the program accepts normal English prose and outputs skills, knowledges, attitudes, and abilities (SKAAs) along with specific guidance and recommended ability measurement tests for nuclear power plant operators. A new method for defining SKAAs is presented along with a sample program output

Inpo/industry job and task analysis efforts

International Nuclear Information System (INIS)

Wigley, W.W.

1985-01-01

One of the goals of INPO is to develop and coordinate industrywide programs to improve the education, training and qualification of nuclear utility personnel. To accomplish this goal, INPO's Training and Education Division: conducts periodic evaluations of industry training programs; provides assistance to the industry in developing training programs; manages the accreditation of utility training programs. These efforts are aimed at satisfying the need for training programs for nuclear utility personnel to be performance-based. Performance-based means that training programs provide an incumbent with the skills and knowledge required to safely perform the job. One of the ways that INPO has provided assistance to the industry is through the industrywide job and task analysis effort. I will discuss the job analysis and task analysis processes, the current status of JTA efforts, JTA products and JTA lessons learned

Development of task analysis method for operator tasks in main control room of an advanced nuclear power plant

International Nuclear Information System (INIS)

Lin Chiuhsiangloe; Hsieh Tsungling

2016-01-01

Task analysis methods provide an insight for quantitative and qualitative predictions of how people will use a proposed system, though the different versions have different emphases. Most of the methods can attest to the coverage of the functionality of a system and all provide estimates of task performance time. However, most of the tasks that operators deal with in a digital work environment in the main control room of an advanced nuclear power plant require high mental activity. Such mental tasks overlap and must be dealt with at the same time; most of them can be assumed to be highly parallel in nature. Therefore, the primary aim to be addressed in this paper was to develop a method that adopts CPM-GOMS (cognitive perceptual motor-goals operators methods selection rules) as the basic pattern of mental task analysis for the advanced main control room. A within-subjects experiment design was used to examine the validity of the modified CPM-GOMS. Thirty participants participated in two task types, which included high- and low-compatibility types. The results indicated that the performance was significantly higher on the high-compatibility task type than on the low-compatibility task type; that is, the modified CPM-GOMS could distinguish the difference between high- and low-compatibility mental tasks. (author)

Physical Education-in-CLIL tasks. Determining tasks characteristics through the analysis of the diaries

Directory of Open Access Journals (Sweden)

Josep Coral Mateu

2013-07-01

Full Text Available This article focuses on the characteristics of Physical Education-in-CLIL (PE-in-CLIL tasks. CLIL (Content and Language Integrated Learning is a teaching approach which uses foreign language as a tool to enhance the subject learning process. We connect PE-in-CLIL with key competences and we introduce the CLIL 4Cs framework. We establish the aims of the study, that is; to describe the features of tasks which are most suitable to PE-in-CLIL and identify integrated tasks which appeal most to learners. We use Action-Research and we collect data through diaries. The participants of the study were twenty-six learners of 5th grade of primary school. We described the strategies of rigour and quality applied and we analysed data using a qualitative data analysis software programme (NVivo. In the results, we identify both the tasks that appeal to students and the tasks that are developed successfully. In the conclusions, we provide teaching guidelines to plan successful PE-in-CLIL tasks that appeal to students. At this point, we emphasise tasks that combined both cooperative learning and oracy with motor activity and games. We also declare the necessity of incorporating scaffolding strategies in order to accommodate students’ linguistic needs and facilitate tasks development. Future CLIL research possibilities emerge in the Physical Education field of work.

Cognitive Task Analysis Based Training for Cyber Situation Awareness

OpenAIRE

Huang , Zequn; Shen , Chien-Chung; Doshi , Sheetal; Thomas , Nimmi; Duong , Ha

2015-01-01

Part 1: Innovative Methods; International audience; Cyber attacks have been increasing significantly in both number and complexity, prompting the need for better training of cyber defense analysts. To conduct effective training for cyber situation awareness, it becomes essential to design realistic training scenarios. In this paper, we present a Cognitive Task Analysis based approach to address this training need. The technique of Cognitive Task Analysis is to capture and represent knowledge ...

Radiation protection technician job task analysis manual

International Nuclear Information System (INIS)

1990-03-01

This manual was developed to assist all DOE contractors in the design and conduct of job task analysis (JTA) for the radiation protection technician. Experience throughout the nuclear industry and the DOE system has indicated that the quality and efficiency in conducting a JTA at most sites is greatly enhanced by using a generic task list for the position, and clearly written guidelines on the JTA process. This manual is designed to provide this information for personnel to use in developing and conducting site-specific JTAs. (VC)

Designing Preclinical Instruction for Psychomotor Skills (II)--Instructional Engineering: Task Analysis.

Science.gov (United States)

Knight, G. William; And Others

1994-01-01

The first step in engineering the instruction of dental psychomotor skills, task analysis, is explained. A chart details the procedural, cognitive, desired-criteria, and desired-performance analysis of a single task, occlusal preparation for amalgam restoration with carious lesion. (MSE)

Experiment with expert system guidance of an engineering analysis task

International Nuclear Information System (INIS)

Ransom, V.H.; Fink, R.K.; Callow, R.A.

1986-01-01

An experiment is being conducted in which expert systems are used to guide the performance of an engineering analysis task. The task chosen for experimentation is the application of a large thermal hydraulic transient simulation computer code. The expectation from this work is that the expert system will result in an improved analytical result with a reduction in the amount of human labor and expertise required. The code associated functions of model formulation, data input, code execution, and analysis of the computed output have all been identified as candidate tasks that could benefit from the use of expert systems. Expert system modules have been built for the model building and data input task. Initial results include the observation that human expectations of an intelligent environment rapidly escalate and structured or stylized tasks that are tolerated in the unaided system are frustrating within the intelligent environment

Task Analysis data Processing and Enhanced Representations (TAPER), Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Task Analysis (TA) is a fundamental part of NASA system design and validation. TAs are used to produce Master Task Lists that support engineering teams and...

Advancing the Certified in Public Health Examination: A Job Task Analysis.

Science.gov (United States)

Kurz, Richard S; Yager, Christopher; Yager, James D; Foster, Allison; Breidenbach, Daniel H; Irwin, Zachary

In 2014, the National Board of Public Health Examiners performed a job task analysis (JTA) to revise the Certified in Public Health (CPH) examination. The objectives of this study were to describe the development, administration, and results of the JTA survey; to present an analysis of the survey results; and to review the implications of this first-ever public health JTA. An advisory committee of public health professionals developed a list of 200 public health job tasks categorized into 10 work domains. The list of tasks was incorporated into a web-based survey, and a snowball sample of public health professionals provided 4850 usable responses. Respondents rated job tasks as essential (4), very important (3), important (2), not very important (1), and never performed (0). The mean task importance ratings ranged from 2.61 to 3.01 (important to very important). The highest mean ratings were for tasks in the ethics domain (mean rating, 3.01). Respondents ranked 10 of the 200 tasks as the most important, with mean task rankings ranging from 2.98 to 3.39. We found subtle differences between male and female respondents and between master of public health and doctor of public health respondents in their rankings. The JTA established a set of job tasks in 10 public health work domains, and the results provided a foundation for refining the CPH examination. Additional steps are needed to further modify the content outline of the examination. An empirical assessment of public health job tasks, using methods such as principal components analysis, may provide additional insight.

An ergonomic task analysis of spinal anaesthesia.

LENUS (Irish Health Repository)

Ajmal, Muhammad

2009-12-01

Ergonomics is the study of physical interaction between humans and their working environment. The objective of this study was to characterize the performance of spinal anaesthesia in an acute hospital setting, applying ergonomic task analysis.

Analysis of the resolution processes of three modeling tasks

Directory of Open Access Journals (Sweden)

Cèsar Gallart Palau

2017-08-01

Full Text Available In this paper we present a comparative analysis of the resolution process of three modeling tasks performed by secondary education students (13-14 years, designed from three different points of view: The Modelling-eliciting Activities, the LEMA project, and the Realistic Mathematical Problems. The purpose of this analysis is to obtain a methodological characterization of them in order to provide to secondary education teachers a proper selection and sequencing of tasks for their implementation in the classroom.

Task Decomposition in Human Reliability Analysis

Energy Technology Data Exchange (ETDEWEB)

Boring, Ronald Laurids [Idaho National Laboratory; Joe, Jeffrey Clark [Idaho National Laboratory

2014-06-01

In the probabilistic safety assessments (PSAs) used in the nuclear industry, human failure events (HFEs) are determined as a subset of hardware failures, namely those hardware failures that could be triggered by human action or inaction. This approach is top-down, starting with hardware faults and deducing human contributions to those faults. Elsewhere, more traditionally human factors driven approaches would tend to look at opportunities for human errors first in a task analysis and then identify which of those errors is risk significant. The intersection of top-down and bottom-up approaches to defining HFEs has not been carefully studied. Ideally, both approaches should arrive at the same set of HFEs. This question remains central as human reliability analysis (HRA) methods are generalized to new domains like oil and gas. The HFEs used in nuclear PSAs tend to be top-down— defined as a subset of the PSA—whereas the HFEs used in petroleum quantitative risk assessments (QRAs) are more likely to be bottom-up—derived from a task analysis conducted by human factors experts. The marriage of these approaches is necessary in order to ensure that HRA methods developed for top-down HFEs are also sufficient for bottom-up applications.

A Task-Content Analysis of an Introductory Entomology Curriculum.

Science.gov (United States)

Brandenburg, R.

Described is an analysis of the content, tasks, and strategies needed by students to enable them to identify insects to order by sight and to family by use of a standard dichotomous taxonomic key. Tasks and strategies are broken down and arranged progressively in the approximate order in which students should progress. Included are listings of…

Performance monitoring and analysis of task-based OpenMP.

Directory of Open Access Journals (Sweden)

Yi Ding

Full Text Available OpenMP, a typical shared memory programming paradigm, has been extensively applied in high performance computing community due to the popularity of multicore architectures in recent years. The most significant feature of the OpenMP 3.0 specification is the introduction of the task constructs to express parallelism at a much finer level of detail. This feature, however, has posed new challenges for performance monitoring and analysis. In particular, task creation is separated from its execution, causing the traditional monitoring methods to be ineffective. This paper presents a mechanism to monitor task-based OpenMP programs with interposition and proposes two demonstration graphs for performance analysis as well. The results of two experiments are discussed to evaluate the overhead of monitoring mechanism and to verify the effects of demonstration graphs using the BOTS benchmarks.

Development of real-time multitask OSS based on cognitive task analysis

International Nuclear Information System (INIS)

Wang He; Cheng Shouyu

2010-01-01

A Real-time Multi-task Operator Support System (RMOSS) has been developed to support the operator's decision making process in the control room of NPP. VxWorks, one embedded real-time operation system, is used for RMOSS software development. According to the SRK modeling analysis result of the operator' decision making process, RMOSS is divided into five system subtasks, including Data Collection and Validation Task (DCVT), Operation Monitor Task (OMT), Fault Diagnostic Task (FDT), Operation Guideline Task (OGT) and Human Machine Interface Task (HMIT). The task test of RMOSS has been done in a real-time full scope simulator. The results showed that each task of RMOSS is capable of accomplishing their functions. (authors)

Nuclear power plant control room task analysis. Pilot study for pressurized water reactors

International Nuclear Information System (INIS)

Barks, D.B.; Kozinsky, E.J.; Eckel, S.

1982-05-01

The purposes of this nuclear plant task analysis pilot study: to demonstrate the use of task analysis techniques on selected abnormal or emergency operation events in a nuclear power plant; to evaluate the use of simulator data obtained from an automated Performance Measurement System to supplement and validate data obtained by traditional task analysis methods; and to demonstrate sample applications of task analysis data to address questions pertinent to nuclear power plant operational safety: control room layout, staffing and training requirements, operating procedures, interpersonal communications, and job performance aids. Five data sources were investigated to provide information for a task analysis. These sources were (1) written operating procedures (event-based); (2) interviews with subject matter experts (the control room operators); (3) videotapes of the control room operators (senior reactor operators and reactor operators) while responding to each event in a simulator; (4) walk-/talk-throughs conducted by control room operators for each event; and (5) simulator data from the PMS

Nuclear power plant control room crew task analysis database: SEEK system. Users manual

International Nuclear Information System (INIS)

Burgy, D.; Schroeder, L.

1984-05-01

The Crew Task Analysis SEEK Users Manual was prepared for the Office of Nuclear Regulatory Research of the US Nuclear Regulatory Commission. It is designed for use with the existing computerized Control Room Crew Task Analysis Database. The SEEK system consists of a PR1ME computer with its associated peripherals and software augmented by General Physics Corporation SEEK database management software. The SEEK software programs provide the Crew Task Database user with rapid access to any number of records desired. The software uses English-like sentences to allow the user to construct logical sorts and outputs of the task data. Given the multiple-associative nature of the database, users can directly access the data at the plant, operating sequence, task or element level - or any combination of these levels. A complete description of the crew task data contained in the database is presented in NUREG/CR-3371, Task Analysis of Nuclear Power Plant Control Room Crews (Volumes 1 and 2)

Human factors evaluation of teletherapy: Function and task analysis. Volume 2

Energy Technology Data Exchange (ETDEWEB)

Kaye, R.D.; Henriksen, K.; Jones, R. [Hughes Training, Inc., Falls Church, VA (United States); Morisseau, D.S.; Serig, D.I. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Technology

1995-07-01

As a treatment methodology, teletherapy selectively destroys cancerous and other tissue by exposure to an external beam of ionizing radiation. Sources of radiation are either a radioactive isotope, typically Cobalt-60 (Co-60), or a linear accelerator. Records maintained by the NRC have identified instances of teletherapy misadministration where the delivered radiation dose has differed from the radiation prescription (e.g., instances where fractions were delivered to the wrong patient, to the wrong body part, or were too great or too little with respect to the defined treatment volume). Both human error and machine malfunction have led to misadministrations. Effective and safe treatment requires a concern for precision and consistency of human-human and human-machine interactions throughout the course of therapy. The present study is the first part of a series of human factors evaluations for identifying the root causes that lead to human error in the teletherapy environment. The human factors evaluations included: (1) a function and task analysis of teletherapy activities, (2) an evaluation of the human-system interfaces, (3) an evaluation of procedures used by teletherapy staff, (4) an evaluation of the training and qualifications of treatment staff (excluding the oncologists), (5) an evaluation of organizational practices and policies, and (6) an identification of problems and alternative approaches for NRC and industry attention. The present report addresses the function and task analysis of teletherapy activities and provides the foundation for the conduct of the subsequent evaluations. The report includes sections on background, methodology, a description of the function and task analysis, and use of the task analysis findings for the subsequent tasks. The function and task analysis data base also is included.

Human factors evaluation of teletherapy: Function and task analysis. Volume 2

International Nuclear Information System (INIS)

Kaye, R.D.; Henriksen, K.; Jones, R.; Morisseau, D.S.; Serig, D.I.

1995-07-01

As a treatment methodology, teletherapy selectively destroys cancerous and other tissue by exposure to an external beam of ionizing radiation. Sources of radiation are either a radioactive isotope, typically Cobalt-60 (Co-60), or a linear accelerator. Records maintained by the NRC have identified instances of teletherapy misadministration where the delivered radiation dose has differed from the radiation prescription (e.g., instances where fractions were delivered to the wrong patient, to the wrong body part, or were too great or too little with respect to the defined treatment volume). Both human error and machine malfunction have led to misadministrations. Effective and safe treatment requires a concern for precision and consistency of human-human and human-machine interactions throughout the course of therapy. The present study is the first part of a series of human factors evaluations for identifying the root causes that lead to human error in the teletherapy environment. The human factors evaluations included: (1) a function and task analysis of teletherapy activities, (2) an evaluation of the human-system interfaces, (3) an evaluation of procedures used by teletherapy staff, (4) an evaluation of the training and qualifications of treatment staff (excluding the oncologists), (5) an evaluation of organizational practices and policies, and (6) an identification of problems and alternative approaches for NRC and industry attention. The present report addresses the function and task analysis of teletherapy activities and provides the foundation for the conduct of the subsequent evaluations. The report includes sections on background, methodology, a description of the function and task analysis, and use of the task analysis findings for the subsequent tasks. The function and task analysis data base also is included

Qualitative Task Analysis to Enhance Sports Characterization: A Surfing Case Study

Directory of Open Access Journals (Sweden)

Moreira Miguel

2014-10-01

Full Text Available The aim of this study was to develop a Matrix of Analysis for Sports Tasks (MAST, regardless of the sports activity, based on practice classification and task analysis. Being this a qualitative research our main question was: in assessing sports’ structure is it possible to make the characterization of any discipline through context and individuals’ behaviours? The sample was within a surf discipline in a competition flowing having 5 of the top 16 Portuguese surfers training together. Based on a qualitative method, studying the surf as the main activity was an interpretative study case. The MAST was applied in four phases: taxonomy; tasks and context description; task analysis; teaching and performance strategies. Its application allowed the activities’ characterization through the observation, surfer’s opinions and bibliographical support. The triangulation of the data was used as an information data treatment. The elements were classified by the challenges proposed to the practitioners and the taxonomy was constituted by the sport activities, group, modality and discipline. Surf is a discipline of surfing which is a sliding sport modality, therefore, a nature sport. In the context description, we had the wave’s components and constraints and the surfboards’ qualities. Through task analysis we obtained a taxonomy of surf manoeuvres. The structural and functional analysis allowed finding solutions for learning of surf techniques with trampoline and skateboards because these fit in sliding sports. MAST makes possible the development of strategies that benefit teaching and performance intervention

Qualitative Task Analysis to Enhance Sports Characterization: A Surfing Case Study

Science.gov (United States)

Moreira, Miguel; Peixoto, César

2014-01-01

The aim of this study was to develop a Matrix of Analysis for Sports Tasks (MAST), regardless of the sports activity, based on practice classification and task analysis. Being this a qualitative research our main question was: in assessing sports’ structure is it possible to make the characterization of any discipline through context and individuals’ behaviours? The sample was within a surf discipline in a competition flowing having 5 of the top 16 Portuguese surfers training together. Based on a qualitative method, studying the surf as the main activity was an interpretative study case. The MAST was applied in four phases: taxonomy; tasks and context description; task analysis; teaching and performance strategies. Its application allowed the activities’ characterization through the observation, surfer’s opinions and bibliographical support. The triangulation of the data was used as an information data treatment. The elements were classified by the challenges proposed to the practitioners and the taxonomy was constituted by the sport activities, group, modality and discipline. Surf is a discipline of surfing which is a sliding sport modality, therefore, a nature sport. In the context description, we had the wave’s components and constraints and the surfboards’ qualities. Through task analysis we obtained a taxonomy of surf manoeuvres. The structural and functional analysis allowed finding solutions for learning of surf techniques with trampoline and skateboards because these fit in sliding sports. MAST makes possible the development of strategies that benefit teaching and performance intervention. PMID:25414757

Dashboard Task Monitor for Managing ATLAS User Analysis on the Grid

Science.gov (United States)

Sargsyan, L.; Andreeva, J.; Jha, M.; Karavakis, E.; Kokoszkiewicz, L.; Saiz, P.; Schovancova, J.; Tuckett, D.; Atlas Collaboration

2014-06-01

The organization of the distributed user analysis on the Worldwide LHC Computing Grid (WLCG) infrastructure is one of the most challenging tasks among the computing activities at the Large Hadron Collider. The Experiment Dashboard offers a solution that not only monitors but also manages (kill, resubmit) user tasks and jobs via a web interface. The ATLAS Dashboard Task Monitor provides analysis users with a tool that is independent of the operating system and Grid environment. This contribution describes the functionality of the application and its implementation details, in particular authentication, authorization and audit of the management operations.

Dashboard task monitor for managing ATLAS user analysis on the grid

International Nuclear Information System (INIS)

Sargsyan, L; Andreeva, J; Karavakis, E; Saiz, P; Tuckett, D; Jha, M; Kokoszkiewicz, L; Schovancova, J

2014-01-01

The organization of the distributed user analysis on the Worldwide LHC Computing Grid (WLCG) infrastructure is one of the most challenging tasks among the computing activities at the Large Hadron Collider. The Experiment Dashboard offers a solution that not only monitors but also manages (kill, resubmit) user tasks and jobs via a web interface. The ATLAS Dashboard Task Monitor provides analysis users with a tool that is independent of the operating system and Grid environment. This contribution describes the functionality of the application and its implementation details, in particular authentication, authorization and audit of the management operations.

Task analysis in neurosciences programme design - neurological ...

African Journals Online (AJOL)

Defining educational objectives is the key to achieving the goal of professional competence in students. The technique of task analysis was selected to determine components of competence in clinical neurology appropriate to the needs of primary care. A survey of neurological problems in general practice revealed that ...

AGAPE-ET for human error analysis of emergency tasks and its application

International Nuclear Information System (INIS)

Kim, J. H.; Jeong, W. D.

2002-01-01

The paper presents a proceduralised human reliability analysis (HRA) methodology, AGAPE-ET (A Guidance And Procedure for Human Error Analysis for Emergency Tasks), covering both qualitative error analysis and quantification of human error probability (HEP) of emergency tasks in nuclear power plants. The AGAPE-ET method is based on the simplified cognitive model. By each cognitive function, error causes or error-likely situations have been identified considering the characteristics of the performance of each cognitive function and influencing mechanism of the performance influencing factors (PIFs) on the cognitive function. Then, error analysis items have been determined from the identified error causes or error-likely situations and a human error analysis procedure based on the error analysis items is organised to help the analysts cue or guide overall human error analysis. The basic scheme for the quantification of HEP consists in the multiplication of the BHEP assigned by the error analysis item and the weight from the influencing factors decision tree (IFDT) constituted by cognitive function. The method can be characterised by the structured identification of the weak points of the task required to perform and the efficient analysis process that the analysts have only to carry out with the necessary cognitive functions. The paper also presents the application of AGAPE-ET to 31 nuclear emergency tasks and its results

A survey on the task analysis methods and techniques for nuclear power plant operators

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Heui; Chun, Se Woo; Suh, Sang Moon; Lee, Jung Woon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-04-01

We have surveyed techniques and methods of task analysis from very traditional ones to recently developed ones that are being applicated to various industrial fields. We compare each other and analyse their fundamental characteristics and methodological specification in order to find a proper one enough to apply to nuclear power plant operators tasks. Generally, the fundamental process of task analyses has well been understandable, but its process of application in practice has not been so simple due to the wide and varying range of applications according to specific domain. Operators` tasks in NPPs are supposed to be performed strictly according to operational procedures written in a text and well trained, so the method of task analysis for operators` tasks in NPPs can be established to have its unique characteristics of task analysis based on the operational procedures. 8 figs., 10 tabs., 18 refs. (Author).

A survey on the task analysis methods and techniques for nuclear power plant operators

International Nuclear Information System (INIS)

Lee, Yong Heui; Chun, Se Woo; Suh, Sang Moon; Lee, Jung Woon

1994-04-01

We have surveyed techniques and methods of task analysis from very traditional ones to recently developed ones that are being applicated to various industrial fields. We compare each other and analyse their fundamental characteristics and methodological specification in order to find a proper one enough to apply to nuclear power plant operators tasks. Generally, the fundamental process of task analyses has well been understandable, but its process of application in practice has not been so simple due to the wide and varying range of applications according to specific domain. Operators' tasks in NPPs are supposed to be performed strictly according to operational procedures written in a text and well trained, so the method of task analysis for operators' tasks in NPPs can be established to have its unique characteristics of task analysis based on the operational procedures. 8 figs., 10 tabs., 18 refs. (Author)

A Validated Task Analysis of the Single Pilot Operations Concept

Science.gov (United States)

Wolter, Cynthia A.; Gore, Brian F.

2015-01-01

The current day flight deck operational environment consists of a two-person Captain/First Officer crew. A concept of operations (ConOps) to reduce the commercial cockpit to a single pilot from the current two pilot crew is termed Single Pilot Operations (SPO). This concept has been under study by researchers in the Flight Deck Display Research Laboratory (FDDRL) at the National Aeronautics and Space Administration's (NASA) Ames (Johnson, Comerford, Lachter, Battiste, Feary, and Mogford, 2012) and researchers from Langley Research Centers (Schutte et al., 2007). Transitioning from a two pilot crew to a single pilot crew will undoubtedly require changes in operational procedures, crew coordination, use of automation, and in how the roles and responsibilities of the flight deck and ATC are conceptualized in order to maintain the high levels of safety expected of the US National Airspace System. These modifications will affect the roles and the subsequent tasks that are required of the various operators in the NextGen environment. The current report outlines the process taken to identify and document the tasks required by the crew according to a number of operational scenarios studied by the FDDRL between the years 2012-2014. A baseline task decomposition has been refined to represent the tasks consistent with a new set of entities, tasks, roles, and responsibilities being explored by the FDDRL as the move is made towards SPO. Information from Subject Matter Expert interviews, participation in FDDRL experimental design meetings, and study observation was used to populate and refine task sets that were developed as part of the SPO task analyses. The task analysis is based upon the proposed ConOps for the third FDDRL SPO study. This experiment possessed nine different entities operating in six scenarios using a variety of SPO-related automation and procedural activities required to guide safe and efficient aircraft operations. The task analysis presents the roles and

Identification and Analysis of Multi-tasking Product Information Search Sessions with Query Logs

Directory of Open Access Journals (Sweden)

Xiang Zhou

2016-09-01

Full Text Available Purpose: This research aims to identify product search tasks in online shopping and analyze the characteristics of consumer multi-tasking search sessions. Design/methodology/approach: The experimental dataset contains 8,949 queries of 582 users from 3,483 search sessions. A sequential comparison of the Jaccard similarity coefficient between two adjacent search queries and hierarchical clustering of queries is used to identify search tasks. Findings: (1 Users issued a similar number of queries (1.43 to 1.47 with similar lengths (7.3-7.6 characters per task in mono-tasking and multi-tasking sessions, and (2 Users spent more time on average in sessions with more tasks, but spent less time for each task when the number of tasks increased in a session. Research limitations: The task identification method that relies only on query terms does not completely reflect the complex nature of consumer shopping behavior. Practical implications: These results provide an exploratory understanding of the relationships among multiple shopping tasks, and can be useful for product recommendation and shopping task prediction. Originality/value: The originality of this research is its use of query clustering with online shopping task identification and analysis, and the analysis of product search session characteristics.

Heuristic Task Analysis on E-Learning Course Development: A Formative Research Study

Science.gov (United States)

Lee, Ji-Yeon; Reigeluth, Charles M.

2009-01-01

Utilizing heuristic task analysis (HTA), a method developed for eliciting, analyzing, and representing expertise in complex cognitive tasks, a formative research study was conducted on the task of e-learning course development to further improve the HTA process. Three instructional designers from three different post-secondary institutions in the…

A Cognitive Task Analysis for Dental Hygiene.

Science.gov (United States)

Cameron, Cheryl A.; Beemsterboer, Phyllis L.; Johnson, Lynn A.; Mislevy, Robert J.; Steinberg, Linda S.; Breyer, F. Jay

2000-01-01

As part of the development of a scoring algorithm for a simulation-based dental hygiene initial licensure examination, this effort conducted a task analysis of the dental hygiene domain. Broad classes of behaviors that distinguish along the dental hygiene expert-novice continuum were identified and applied to the design of nine paper-based cases…

Development of contextual task analysis for NPP control room operators' work

International Nuclear Information System (INIS)

Hukki, K.

1998-01-01

The paper introduces a contextual approach to task analysis concerning control room operators' tasks and task conditions in nuclear power plants. The approach is based on the ecological concept of the situational appropriateness of activity. The task demands are dependent on the ultimate task of the operators which is to maintain the critical safety functions of the process. The context also sets boundary conditions to the fulfilment of these demands. The conceptualisation of the context affords possibilities to comprehend and make visible the core demands of the operators' work. Characteristic to the approach is that the conceptualisation is made both from the point of the operators who are making interpretations of the situation and from the point of the process to be controlled. The context is described as a world of operators' possibilities and constraints and, at the same time, in relation to the demands set by the nature of the process. The method is under development and has been applied in simulator training, in the evaluation of the control room information and in the integrated development of reliability analysis. The method emphasizes the role of explicit conceptualisation of the task situations. Explicity enhances its role as a conceptual tool and, therefore, promotes common awareness in these domains. (orig.)

Memory systems, processes, and tasks: taxonomic clarification via factor analysis.

Science.gov (United States)

Bruss, Peter J; Mitchell, David B

2009-01-01

The nature of various memory systems was examined using factor analysis. We reanalyzed data from 11 memory tasks previously reported in Mitchell and Bruss (2003). Four well-defined factors emerged, closely resembling episodic and semantic memory and conceptual and perceptual implicit memory, in line with both memory systems and transfer-appropriate processing accounts. To explore taxonomic issues, we ran separate analyses on the implicit tasks. Using a cross-format manipulation (pictures vs. words), we identified 3 prototypical tasks. Word fragment completion and picture fragment identification tasks were "factor pure," tapping perceptual processes uniquely. Category exemplar generation revealed its conceptual nature, yielding both cross-format priming and a picture superiority effect. In contrast, word stem completion and picture naming were more complex, revealing attributes of both processes.

Using task analysis to improve the requirements elicitation in health information system.

Science.gov (United States)

Teixeira, Leonor; Ferreira, Carlos; Santos, Beatriz Sousa

2007-01-01

This paper describes the application of task analysis within the design process of a Web-based information system for managing clinical information in hemophilia care, in order to improve the requirements elicitation and, consequently, to validate the domain model obtained in a previous phase of the design process (system analysis). The use of task analysis in this case proved to be a practical and efficient way to improve the requirements engineering process by involving users in the design process.

Cognitive Task Analysis of the Battalion Level Visualization Process

National Research Council Canada - National Science Library

Leedom, Dennis K; McElroy, William; Shadrick, Scott B; Lickteig, Carl; Pokorny, Robet A; Haynes, Jacqueline A; Bell, James

2007-01-01

... position or as a battalion Operations Officer or Executive Officer. Bases on findings from the cognitive task analysis, 11 skill areas were identified as potential focal points for future training development...

Initiating an ergonomic analysis. A process for jobs with highly variable tasks.

Science.gov (United States)

Conrad, K M; Lavender, S A; Reichelt, P A; Meyer, F T

2000-09-01

Occupational health nurses play a vital role in addressing ergonomic problems in the workplace. Describing and documenting exposure to ergonomic risk factors is a relatively straightforward process in jobs in which the work is repetitive. In other types of work, the analysis becomes much more challenging because tasks may be repeated infrequently, or at irregular time intervals, or under different environmental and temporal conditions, thereby making it difficult to observe a "representative" sample of the work performed. This article describes a process used to identify highly variable job tasks for ergonomic analyses. The identification of tasks for ergonomic analysis was a two step process involving interviews and a survey of firefighters and paramedics from a consortium of 14 suburban fire departments. The interviews were used to generate a list of frequently performed, physically strenuous job tasks and to capture clear descriptions of those tasks and associated roles. The goals of the survey were to confirm the interview findings across the entire target population and to quantify the frequency and degree of strenuousness of each task. In turn, the quantitative results from the survey were used to prioritize job tasks for simulation. Although this process was used to study firefighters and paramedics, the approach is likely to be suitable for many other types of occupations in which the tasks are highly variable in content and irregular in frequency.

Closed-loop, pilot/vehicle analysis of the approach and landing task

Science.gov (United States)

Anderson, M. R.; Schmidt, D. K.

1986-01-01

In the case of approach and landing, it is universally accepted that the pilot uses more than one vehicle response, or output, to close his control loops. Therefore, to model this task, a multi-loop analysis technique is required. The analysis problem has been in obtaining reasonable analytic estimates of the describing functions representing the pilot's loop compensation. Once these pilot describing functions are obtained, appropriate performance and workload metrics must then be developed for the landing task. The optimal control approach provides a powerful technique for obtaining the necessary describing functions, once the appropriate task objective is defined in terms of a quadratic objective function. An approach is presented through the use of a simple, reasonable objective function and model-based metrics to evaluate loop performance and pilot workload. The results of an analysis of the LAHOS (Landing and Approach of Higher Order Systems) study performed by R.E. Smith is also presented.

Using Heuristic Task Analysis to Create Web-Based Instructional Design Theory

Science.gov (United States)

Fiester, Herbert R.

2010-01-01

The first purpose of this study was to identify procedural and heuristic knowledge used when creating web-based instruction. The second purpose of this study was to develop suggestions for improving the Heuristic Task Analysis process, a technique for eliciting, analyzing, and representing expertise in cognitively complex tasks. Three expert…

Human factors evaluation of remote afterloading brachytherapy. Volume 2, Function and task analysis

Energy Technology Data Exchange (ETDEWEB)

Callan, J.R.; Gwynne, J.W. III; Kelly, T.T.; Muckler, F.A. [Pacific Science and Engineering Group, San Diego, CA (United States); Saunders, W.M.; Lepage, R.P.; Chin, E. [University of California San Diego Medical Center, CA (United States). Div. of Radiation Oncology; Schoenfeld, I.; Serig, D.I. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Technology

1995-05-01

A human factors project on the use of nuclear by-product material to treat cancer using remotely operated afterloaders was undertaken by the Nuclear Regulatory Commission. The purpose of the project was to identify factors that contribute to human error in the system for remote afterloading brachytherapy (RAB). This report documents the findings from the first phase of the project, which involved an extensive function and task analysis of RAB. This analysis identified the functions and tasks in RAB, made preliminary estimates of the likelihood of human error in each task, and determined the skills needed to perform each RAB task. The findings of the function and task analysis served as the foundation for the remainder of the project, which evaluated four major aspects of the RAB system linked to human error: human-system interfaces; procedures and practices; training and qualifications of RAB staff; and organizational practices and policies. At its completion, the project identified and prioritized areas for recommended NRC and industry attention based on all of the evaluations and analyses.

Human factors evaluation of remote afterloading brachytherapy. Volume 2, Function and task analysis

International Nuclear Information System (INIS)

Callan, J.R.; Gwynne, J.W. III; Kelly, T.T.; Muckler, F.A.; Saunders, W.M.; Lepage, R.P.; Chin, E.; Schoenfeld, I.; Serig, D.I.

1995-05-01

A human factors project on the use of nuclear by-product material to treat cancer using remotely operated afterloaders was undertaken by the Nuclear Regulatory Commission. The purpose of the project was to identify factors that contribute to human error in the system for remote afterloading brachytherapy (RAB). This report documents the findings from the first phase of the project, which involved an extensive function and task analysis of RAB. This analysis identified the functions and tasks in RAB, made preliminary estimates of the likelihood of human error in each task, and determined the skills needed to perform each RAB task. The findings of the function and task analysis served as the foundation for the remainder of the project, which evaluated four major aspects of the RAB system linked to human error: human-system interfaces; procedures and practices; training and qualifications of RAB staff; and organizational practices and policies. At its completion, the project identified and prioritized areas for recommended NRC and industry attention based on all of the evaluations and analyses

Articulating training methods using Job Task Analysis (JTA) - determined proficiency levels

International Nuclear Information System (INIS)

McDonald, B.A.

1985-01-01

The INPO task analysis process, as well as that of many utilities, is based on the approach used by the US Navy. This is undoubtedly due to the Navy nuclear background of many of those involved in introducing the systems approach to training to the nuclear power industry. This report outlines an approach, used by a major North-Central utility, which includes a process developed by the Air Force. Air Force task analysis and instructional system development includes the use of a proficiency code. The code includes consideration of three types of learning - task performance, task knowledge, and subject knowledge - and four levels of competence for each. The use of this classification system facilitates the identification of desired competency levels at the completion of formal training in the classroom and lab, and of informal training on the job. By using the Air Force's proficiency code. The utility's program developers were able to develop generic training for its main training facility and site-specific training at its nuclear plants, using the most efficiency and cost-effective training methods

Do tasks make a difference? Accounting for heterogeneity of performance of children with reading difficulties on tasks of executive function: findings from a meta-analysis.

Science.gov (United States)

Booth, Josephine N; Boyle, James M E; Kelly, Steve W

2010-03-01

Research studies have implicated executive functions in reading difficulties (RD). But while some studies have found children with RD to be impaired on tasks of executive function other studies report unimpaired performance. A meta-analysis was carried out to determine whether these discrepant findings can be accounted for by differences in the tasks of executive function that are utilized. A total of 48 studies comparing the performance on tasks of executive function of children with RD with their typically developing peers were included in the meta-analysis, yielding 180 effect sizes. An overall effect size of 0.57 (SE .03) was obtained, indicating that children with RD have impairments on tasks of executive function. However, effect sizes varied considerably suggesting that the impairment is not uniform. Moderator analysis revealed that task modality and IQ-achievement discrepancy definitions of RD influenced the magnitude of effect; however, the age and gender of participants and the nature of the RD did not have an influence. While the children's RD were associated with executive function impairments, variation in effect size is a product of the assessment task employed, underlying task demands, and definitional criteria.

Use of Job Task Analysis (JTA) in the development of craft training programs

International Nuclear Information System (INIS)

Gonyeau, J.A.; Long, R.E.

1985-01-01

Northern States Power Company is making a major effort to develop performance based training. It is finding the use of JTA data very helpful in the revision of its maintenance craft training programs. The technique being used involves a group of interns from the Training and Development Program of the University of Minnesota. These interns are largely graduate students, but with no nuclear and little mechanical/electrical experience. A Job Analysis for each discipline was used to: guide the following task analysis, determine program content, evaluate existing OJT check lists, and to define the four crafts used for mechanical maintenance. From the Job Analysis, a Training Task List was developed and correlated to training materials. The analysis of the tasks on the Training Task List is proceeding. Taxonomies of systems or subjects are compared to existing lesson plans. These taxonomies are useful when writing new lesson plans. The taxonomies are an excellent start for the development of enabling objectives. A Nine-Step Plan is being followed in the application of JTA data to the development and refinement of performance based training

Data analysis & probability task sheets : grades pk-2

CERN Document Server

Cook, Tanya

2009-01-01

For grades PK-2, our Common Core State Standards-based resource meets the data analysis & probability concepts addressed by the NCTM standards and encourages your students to learn and review the concepts in unique ways. Each task sheet is organized around a central problem taken from real-life experiences of the students.

Degradation mode analysis: An approach to establish effective predictive maintenance tasks

International Nuclear Information System (INIS)

Sonnett, D.E.; Douglass, P.T.; Barnard, D.D.

1991-01-01

A significant number of nuclear generating stations have been employing Reliability Centered Maintenance methodology to arrive at applicable and effective maintenance tasks for their plant equipment. The resultant endpoint of most programs has been an increased emphasis on predictive maintenance as the task of choice for monitoring and trending plant equipment condition to address failure mechanisms of the analyses. Many of these plants have spent several years conducting reliability centered analysis before they seriously begin implementing predictive program improvements. In this paper we present another methodology, entitled Degradation Mode Analysis, which provides a more direct method to quickly and economically achieve the major benefit of reliability centered analysis, namely predictive maintenance. (author)

Use of Job and Task Analysis in Training.

Science.gov (United States)

George Washington Univ., Alexandria, VA. Human Resources Research Office.

A t a briefing sponsored by the Office of the Deputy Chief of Staff for Individual Training, members of the Human Resources Research Office reported on four projects using job and task analysis in different training situations. Wor k Unit STOCK was a training program designed to develop training management procedures for heterogeneous ability…

Single-Family Energy Auditor Job Task Analysis

Energy Technology Data Exchange (ETDEWEB)

Head, Heather R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-05-02

The National Renewable Energy Laboratory (NREL) is contracted by the U.S. Department of Energy (DOE) Weatherization Assistance Program (WAP) to develop and maintain the resources under the Guidelines for Home Energy Professionals (GHEP) project. As part of the GHEP strategy to increase the quality of work conducted for single-family, residential energy-efficiency retrofits, the Home Energy Professionals Job Task Analysis are used as the foundation for quality training programs and trainers.

PBF task and training requirements analysis

International Nuclear Information System (INIS)

Blackman, H.S.; Gertman, D.I.; Petersen, R.J.

1983-05-01

Task analyses were used to assist in identifying improvements needed in the training curriculum for selected positions at the Power Burst Facility (PBF). Four positions were examined: Experiment Power Reactor Operator, Experiment (EPRO-Ex); Experiment Power Reactor Operator, Plant (EPRO-P); Experiment Power Reactor Operator, Console (EPRO-Co), and Shift Supervisor (SS). A complete position task listing and core of tasks defined in terms of (a) level of difficulty to perform, (b) severity of consequence if performed improperly, and (c) associated error probability were identified by each position. The systems, academic, and administrative knowledge needed by job incumbents to perform each task was noted. Strategies for teaching the knowledge associated with these tasks are presented

Task Analysis of Emergency Operating Procedures for Generating Quantitative HRA Data

Energy Technology Data Exchange (ETDEWEB)

Kim, Yochan; Park, Jinkyun; Kim, Seunghwan; Choi, Sun Yeong; Jung, Wondea; Jang, Inseok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

In this paper, the analysis results of the emergency task in the procedures (EOPs; emergency operating procedures) that can be observed from the simulator data are introduced. The task type, component type, system type, and additional information related with the performance of the operators were described. In addition, a prospective application of the analyzed information to HEP quantification process was discussed. In the probabilistic safety analysis (PSA) field, various human reliability analyses (HRAs) have been performed to produce estimates of human error probabilities (HEPs) for significant tasks in complex socio-technical systems. To this end, Many HRA methods have provided basic or nominal HEPs for typical tasks and the quantitative relations describing how a certain performance context or performance shaping factors (PSFs) affects the HEPs. In the HRA community, however, the necessity of appropriate and sufficient human performance data has been recently indicated. This is because a wide range of quantitative estimates in the previous HRA methods are not supported by solid empirical bases. Hence, there have been attempts to collect HRA supporting data. For example, KAERI has started to collect information on both unsafe acts of operators and the relevant PSFs. A characteristic of the database that is being developed at KAERI is that human errors and related PSF surrogates that can be objectively observable are collected from full-scope simulator experiences. In this environment, to produce concretely grounded bases of the HEPs, the traits or attributes of tasks where significant human errors can be observed should be definitely determined. The determined traits should be applicable to compare the HEPs on the traits with the data in previous HRA methods or databases. In this study, task characteristics in a Westinghouse type of EOPs were analyzed with the defining task, component, and system taxonomies.

Combined analysis of job and task benzene air exposures among workers at four US refinery operations.

Science.gov (United States)

Burns, Amanda; Shin, Jennifer Mi; Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

2017-03-01

Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers' exposures to benzene over the past 30 years.

Pilot-model analysis and simulation study of effect of control task desired control response

Science.gov (United States)

Adams, J. J.; Gera, J.; Jaudon, J. B.

1978-01-01

A pilot model analysis was performed that relates pilot control compensation, pilot aircraft system response, and aircraft response characteristics for longitudinal control. The results show that a higher aircraft short period frequency is required to achieve superior pilot aircraft system response in an altitude control task than is required in an attitude control task. These results were confirmed by a simulation study of target tracking. It was concluded that the pilot model analysis provides a theoretical basis for determining the effect of control task on pilot opinions.

Task-related component analysis for functional neuroimaging and application to near-infrared spectroscopy data.

Science.gov (United States)

Tanaka, Hirokazu; Katura, Takusige; Sato, Hiroki

2013-01-01

Reproducibility of experimental results lies at the heart of scientific disciplines. Here we propose a signal processing method that extracts task-related components by maximizing the reproducibility during task periods from neuroimaging data. Unlike hypothesis-driven methods such as general linear models, no specific time courses are presumed, and unlike data-driven approaches such as independent component analysis, no arbitrary interpretation of components is needed. Task-related components are constructed by a linear, weighted sum of multiple time courses, and its weights are optimized so as to maximize inter-block correlations (CorrMax) or covariances (CovMax). Our analysis method is referred to as task-related component analysis (TRCA). The covariance maximization is formulated as a Rayleigh-Ritz eigenvalue problem, and corresponding eigenvectors give candidates of task-related components. In addition, a systematic statistical test based on eigenvalues is proposed, so task-related and -unrelated components are classified objectively and automatically. The proposed test of statistical significance is found to be independent of the degree of autocorrelation in data if the task duration is sufficiently longer than the temporal scale of autocorrelation, so TRCA can be applied to data with autocorrelation without any modification. We demonstrate that simple extensions of TRCA can provide most distinctive signals for two tasks and can integrate multiple modalities of information to remove task-unrelated artifacts. TRCA was successfully applied to synthetic data as well as near-infrared spectroscopy (NIRS) data of finger tapping. There were two statistically significant task-related components; one was a hemodynamic response, and another was a piece-wise linear time course. In summary, we conclude that TRCA has a wide range of applications in multi-channel biophysical and behavioral measurements. Copyright © 2012 Elsevier Inc. All rights reserved.

The Use Of Computational Human Performance Modeling As Task Analysis Tool

Energy Technology Data Exchange (ETDEWEB)

Jacuqes Hugo; David Gertman

2012-07-01

During a review of the Advanced Test Reactor safety basis at the Idaho National Laboratory, human factors engineers identified ergonomic and human reliability risks involving the inadvertent exposure of a fuel element to the air during manual fuel movement and inspection in the canal. There were clear indications that these risks increased the probability of human error and possible severe physical outcomes to the operator. In response to this concern, a detailed study was conducted to determine the probability of the inadvertent exposure of a fuel element. Due to practical and safety constraints, the task network analysis technique was employed to study the work procedures at the canal. Discrete-event simulation software was used to model the entire procedure as well as the salient physical attributes of the task environment, such as distances walked, the effect of dropped tools, the effect of hazardous body postures, and physical exertion due to strenuous tool handling. The model also allowed analysis of the effect of cognitive processes such as visual perception demands, auditory information and verbal communication. The model made it possible to obtain reliable predictions of operator performance and workload estimates. It was also found that operator workload as well as the probability of human error in the fuel inspection and transfer task were influenced by the concurrent nature of certain phases of the task and the associated demand on cognitive and physical resources. More importantly, it was possible to determine with reasonable accuracy the stages as well as physical locations in the fuel handling task where operators would be most at risk of losing their balance and falling into the canal. The model also provided sufficient information for a human reliability analysis that indicated that the postulated fuel exposure accident was less than credible.

Visual Cluster Analysis for Computing Tasks at Workflow Management System of the ATLAS Experiment

CERN Document Server

Grigoryeva, Maria; The ATLAS collaboration

2018-01-01

Hundreds of petabytes of experimental data in high energy and nuclear physics (HENP) have already been obtained by unique scientific facilities such as LHC, RHIC, KEK. As the accelerators are being modernized (energy and luminosity were increased), data volumes are rapidly growing and have reached the exabyte scale, that also affects the increasing the number of analysis and data processing tasks, that are competing continuously for computational resources. The increase of processing tasks causes an increase in the performance of the computing environment by the involvement of high-performance computing resources, and forming a heterogeneous distributed computing environment (hundreds of distributed computing centers). In addition, errors happen to occur while executing tasks for data analysis and processing, which are caused by software and hardware failures. With a distributed model of data processing and analysis, the optimization of data management and workload systems becomes a fundamental task, and the ...

Visual Task Demands and the Auditory Mismatch Negativity: An Empirical Study and a Meta-Analysis.

Science.gov (United States)

Wiens, Stefan; Szychowska, Malina; Nilsson, Mats E

2016-01-01

Because the auditory system is particularly useful in monitoring the environment, previous research has examined whether task-irrelevant, auditory distracters are processed even if subjects focus their attention on visual stimuli. This research suggests that attentionally demanding visual tasks decrease the auditory mismatch negativity (MMN) to simultaneously presented auditory distractors. Because a recent behavioral study found that high visual perceptual load decreased detection sensitivity of simultaneous tones, we used a similar task (n = 28) to determine if high visual perceptual load would reduce the auditory MMN. Results suggested that perceptual load did not decrease the MMN. At face value, these nonsignificant findings may suggest that effects of perceptual load on the MMN are smaller than those of other demanding visual tasks. If so, effect sizes should differ systematically between the present and previous studies. We conducted a selective meta-analysis of published studies in which the MMN was derived from the EEG, the visual task demands were continuous and varied between high and low within the same task, and the task-irrelevant tones were presented in a typical oddball paradigm simultaneously with the visual stimuli. Because the meta-analysis suggested that the present (null) findings did not differ systematically from previous findings, the available evidence was combined. Results of this meta-analysis confirmed that demanding visual tasks reduce the MMN to auditory distracters. However, because the meta-analysis was based on small studies and because of the risk for publication biases, future studies should be preregistered with large samples (n > 150) to provide confirmatory evidence for the results of the present meta-analysis. These future studies should also use control conditions that reduce confounding effects of neural adaptation, and use load manipulations that are defined independently from their effects on the MMN.

Visual Task Demands and the Auditory Mismatch Negativity: An Empirical Study and a Meta-Analysis

Science.gov (United States)

Wiens, Stefan; Szychowska, Malina; Nilsson, Mats E.

2016-01-01

Because the auditory system is particularly useful in monitoring the environment, previous research has examined whether task-irrelevant, auditory distracters are processed even if subjects focus their attention on visual stimuli. This research suggests that attentionally demanding visual tasks decrease the auditory mismatch negativity (MMN) to simultaneously presented auditory distractors. Because a recent behavioral study found that high visual perceptual load decreased detection sensitivity of simultaneous tones, we used a similar task (n = 28) to determine if high visual perceptual load would reduce the auditory MMN. Results suggested that perceptual load did not decrease the MMN. At face value, these nonsignificant findings may suggest that effects of perceptual load on the MMN are smaller than those of other demanding visual tasks. If so, effect sizes should differ systematically between the present and previous studies. We conducted a selective meta-analysis of published studies in which the MMN was derived from the EEG, the visual task demands were continuous and varied between high and low within the same task, and the task-irrelevant tones were presented in a typical oddball paradigm simultaneously with the visual stimuli. Because the meta-analysis suggested that the present (null) findings did not differ systematically from previous findings, the available evidence was combined. Results of this meta-analysis confirmed that demanding visual tasks reduce the MMN to auditory distracters. However, because the meta-analysis was based on small studies and because of the risk for publication biases, future studies should be preregistered with large samples (n > 150) to provide confirmatory evidence for the results of the present meta-analysis. These future studies should also use control conditions that reduce confounding effects of neural adaptation, and use load manipulations that are defined independently from their effects on the MMN. PMID:26741815

Task demand, task management, and teamwork

Energy Technology Data Exchange (ETDEWEB)

Braarud, Per Oeivind; Brendryen, Haavar

2001-03-15

The current approach to mental workload assessment in process control was evaluated in 3 previous HAMMLAB studies, by analysing the relationship between workload related measures and performance. The results showed that subjective task complexity rating was related to team's control room performance, that mental effort (NASA-TLX) was weakly related to performance, and that overall activity level was unrelated to performance. The results support the argument that general cognitive measures, i.e., mental workload, are weakly related to performance in the process control domain. This implies that other workload concepts than general mental workload are needed for valid assessment of human reliability and for valid assessment of control room configurations. An assessment of task load in process control suggested that how effort is used to handle task demand is more important then the level of effort invested to solve the task. The report suggests two main workload related concepts with a potential as performance predictors in process control: task requirements, and the work style describing how effort is invested to solve the task. The task requirements are seen as composed of individual task demand and team demand. In a similar way work style are seen as composed of individual task management and teamwork style. A framework for the development of the concepts is suggested based on a literature review and experiences from HAMMLAB research. It is suggested that operational definitions of workload concepts should be based on observable control room behaviour, to assure a potential for developing performance-shaping factors. Finally an explorative analysis of teamwork measures and performance in one study indicated that teamwork concepts are related to performance. This lends support to the suggested development of team demand and teamwork style as elements of a framework for the analysis of workload in process control. (Author)

Comparative evaluation of three cognitive error analysis methods through an application to accident management tasks in NPPs

International Nuclear Information System (INIS)

Jung, Won Dea; Kim, Jae Whan; Ha, Jae Joo; Yoon, Wan C.

1999-01-01

This study was performed to comparatively evaluate selected Human Reliability Analysis (HRA) methods which mainly focus on cognitive error analysis, and to derive the requirement of a new human error analysis (HEA) framework for Accident Management (AM) in nuclear power plants(NPPs). In order to achieve this goal, we carried out a case study of human error analysis on an AM task in NPPs. In the study we evaluated three cognitive HEA methods, HRMS, CREAM and PHECA, which were selected through the review of the currently available seven cognitive HEA methods. The task of reactor cavity flooding was chosen for the application study as one of typical tasks of AM in NPPs. From the study, we derived seven requirement items for a new HEA method of AM in NPPs. We could also evaluate the applicability of three cognitive HEA methods to AM tasks. CREAM is considered to be more appropriate than others for the analysis of AM tasks. But, PHECA is regarded less appropriate for the predictive HEA technique as well as for the analysis of AM tasks. In addition to these, the advantages and disadvantages of each method are described. (author)

Partial Derivative Games in Thermodynamics: A Cognitive Task Analysis

Science.gov (United States)

Kustusch, Mary Bridget; Roundy, David; Dray, Tevian; Manogue, Corinne A.

2014-01-01

Several studies in recent years have demonstrated that upper-division students struggle with the mathematics of thermodynamics. This paper presents a task analysis based on several expert attempts to solve a challenging mathematics problem in thermodynamics. The purpose of this paper is twofold. First, we highlight the importance of cognitive task…

Task analysis: How far are we from usable PRA input

International Nuclear Information System (INIS)

Gertman, D.I.; Blackman, H.S.; Hinton, M.F.

1984-01-01

This chapter reviews data collected at the Idaho National Engineering Laboratory for three DOE-owned reactors (the Advanced Test Reactor, the Power Burst Facility, and the Loss of Fluids Test Reactor) in order to identify usable Probabilistic Risk Assessment (PRA) input. Task analytic procedures involve the determination of manning and skill levels as a means of determining communication requirements, in assessing job performance aids, and in assessing the accuracy and completeness of emergency and maintenance procedures. The least understood aspect in PRA and plant reliability models is the human factor. A number of examples from the data base are discussed and offered as a means of providing more meaningful data than has been available to PRA analysts in the past. It is concluded that the plant hardware-procedures-personnel interfaces are essential to safe and efficient plant operations and that task analysis is a reasonably sound way of achieving a qualitative method for identifying those tasks most strongly associated with task difficulty, severity of consequence, and error probability

Cognitive Task Analysis of Prioritization in Air Traffic Control.

Science.gov (United States)

Redding, Richard E.; And Others

A cognitive task analysis was performed to analyze the key cognitive components of the en route air traffic controllers' jobs. The goals were to ascertain expert mental models and decision-making strategies and to identify important differences in controller knowledge, skills, and mental models as a function of expertise. Four groups of…

Structural Design of HRA Database using generic task for Quantitative Analysis of Human Performance

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Hwan; Kim, Yo Chan; Choi, Sun Yeong; Park, Jin Kyun; Jung Won Dea [KAERI, Daejeon (Korea, Republic of)

2016-05-15

This paper describes a design of generic task based HRA database for quantitative analysis of human performance in order to estimate the number of task conductions. The estimation method to get the total task conduction number using direct counting is not easy to realize and maintain its data collection framework. To resolve this problem, this paper suggests an indirect method and a database structure using generic task that enables to estimate the total number of conduction based on instructions of operating procedures of nuclear power plants. In order to reduce human errors, therefore, all information on the human errors taken by operators in the power plant should be systematically collected and examined in its management. Korea Atomic Energy Research Institute (KAERI) is carrying out a research to develop a data collection framework to establish a Human Reliability Analysis (HRA) database that could be employed as technical bases to generate human error probabilities (HEPs) and performance shaping factors (PSFs)]. As a result of the study, the essential table schema was designed to the generic task database which stores generic tasks, procedure lists and task tree structures, and other supporting tables. The number of task conduction based on the operating procedures for HEP estimation was enabled through the generic task database and framework. To verify the framework applicability, case study for the simulated experiments was performed and analyzed using graphic user interfaces developed in this study.

Structural Design of HRA Database using generic task for Quantitative Analysis of Human Performance

International Nuclear Information System (INIS)

Kim, Seung Hwan; Kim, Yo Chan; Choi, Sun Yeong; Park, Jin Kyun; Jung Won Dea

2016-01-01

This paper describes a design of generic task based HRA database for quantitative analysis of human performance in order to estimate the number of task conductions. The estimation method to get the total task conduction number using direct counting is not easy to realize and maintain its data collection framework. To resolve this problem, this paper suggests an indirect method and a database structure using generic task that enables to estimate the total number of conduction based on instructions of operating procedures of nuclear power plants. In order to reduce human errors, therefore, all information on the human errors taken by operators in the power plant should be systematically collected and examined in its management. Korea Atomic Energy Research Institute (KAERI) is carrying out a research to develop a data collection framework to establish a Human Reliability Analysis (HRA) database that could be employed as technical bases to generate human error probabilities (HEPs) and performance shaping factors (PSFs)]. As a result of the study, the essential table schema was designed to the generic task database which stores generic tasks, procedure lists and task tree structures, and other supporting tables. The number of task conduction based on the operating procedures for HEP estimation was enabled through the generic task database and framework. To verify the framework applicability, case study for the simulated experiments was performed and analyzed using graphic user interfaces developed in this study.

Children's Task Engagement during Challenging Puzzle Tasks

Science.gov (United States)

Wang, Feihong; Algina, James; Snyder, Patricia; Cox, Martha

2017-01-01

We examined children's task engagement during a challenging puzzle task in the presence of their primary caregivers by using a representative sample of rural children from six high-poverty counties across two states. Weighted longitudinal confirmatory factor analysis and structural equation modeling were used to identify a task engagement factor…

Student Task Analysis for the Development of E-Learning Lectural System in Basic Chemistry Courses in FKIP UMMY Solok

Science.gov (United States)

Afrahamiryano, A.; Ariani, D.

2018-04-01

The student task analysis is one part of the define stage in development research using the 4-D development model. Analysis of this task is useful to determine the level of understanding of students on lecture materials that have been given. The results of this task analysis serve as a measuring tool to determine the level of success of learning and as a basis in the development of lecture system. Analysis of this task is done by the method of observation and documentation study of the tasks undertaken by students. The results of this analysis are then described and after that triangulation are done to draw conclusions. The results of the analysis indicate that the students' level of understanding is high for theoretical and low material for counting material. Based on the results of this task analysis, it can be concluded that e-learning lecture system developed should be able to increase students' understanding on basic chemicals that are calculated.

Task versus relationship conflict, team performance, and team member satisfaction: a meta-analysis.

Science.gov (United States)

De Dreu, Carsten K W; Weingart, Laurie R

2003-08-01

This study provides a meta-analysis of research on the associations between relationship conflict, task conflict, team performance, and team member satisfaction. Consistent with past theorizing, results revealed strong and negative correlations between relationship conflict, team performance, and team member satisfaction. In contrast to what has been suggested in both academic research and introductory textbooks, however, results also revealed strong and negative (instead of the predicted positive) correlations between task conflict team performance, and team member satisfaction. As predicted, conflict had stronger negative relations with team performance in highly complex (decision making, project, mixed) than in less complex (production) tasks. Finally, task conflict was less negatively related to team performance when task conflict and relationship conflict were weakly, rather than strongly, correlated.

Linkage Technologies Which Enhance the Utility of Task-Based Occupational Analysis

National Research Council Canada - National Science Library

Phalen, William

1999-01-01

.... It is alleged that traditional task-based occupational analysis is too labor intensive, too costly, too cumbersome, and too static to meet the emerging and rapidly changing needs of a business...

The Effects of Describing Antecedent Stimuli and Performance Criteria in Task Analysis Instruction for Graphing

Science.gov (United States)

Tyner, Bryan C.; Fienup, Daniel M.

2016-01-01

Task analyses are ubiquitous to applied behavior analysis interventions, yet little is known about the factors that make them effective. Numerous task analyses have been published in behavior analytic journals for constructing single-subject design graphs; however, learner outcomes using these task analyses may fall short of what could be…

Control system of the inspection robots group applying auctions and multi-criteria analysis for task allocation

Science.gov (United States)

Panfil, Wawrzyniec; Moczulski, Wojciech

2017-10-01

In the paper presented is a control system of a mobile robots group intended for carrying out inspection missions. The main research problem was to define such a control system in order to facilitate a cooperation of the robots resulting in realization of the committed inspection tasks. Many of the well-known control systems use auctions for tasks allocation, where a subject of an auction is a task to be allocated. It seems that in the case of missions characterized by much larger number of tasks than number of robots it will be better if robots (instead of tasks) are subjects of auctions. The second identified problem concerns the one-sided robot-to-task fitness evaluation. Simultaneous assessment of the robot-to-task fitness and task attractiveness for robot should affect positively for the overall effectiveness of the multi-robot system performance. The elaborated system allows to assign tasks to robots using various methods for evaluation of fitness between robots and tasks, and using some tasks allocation methods. There is proposed the method for multi-criteria analysis, which is composed of two assessments, i.e. robot's concurrency position for task among other robots and task's attractiveness for robot among other tasks. Furthermore, there are proposed methods for tasks allocation applying the mentioned multi-criteria analysis method. The verification of both the elaborated system and the proposed tasks' allocation methods was carried out with the help of simulated experiments. The object under test was a group of inspection mobile robots being a virtual counterpart of the real mobile-robot group.

Human reliability analysis of performing tasks in plants based on fuzzy integral

International Nuclear Information System (INIS)

Washio, Takashi; Kitamura, Yutaka; Takahashi, Hideaki

1991-01-01

The effective improvement of the human working conditions in nuclear power plants might be a solution for the enhancement of the operation safety. The human reliability analysis (HRA) gives a methodological basis of the improvement based on the evaluation of human reliability under various working conditions. This study investigates some difficulties of the human reliability analysis using conventional linear models and recent fuzzy integral models, and provides some solutions to the difficulties. The following practical features of the provided methods are confirmed in comparison with the conventional methods: (1) Applicability to various types of tasks (2) Capability of evaluating complicated dependencies among working condition factors (3) A priori human reliability evaluation based on a systematic task analysis of human action processes (4) A conversion scheme to probability from indices representing human reliability. (author)

Workplace for analysis of task performance

NARCIS (Netherlands)

Bos, J; Mulder, LJM; van Ouwerkerk, RJ; Maarse, FJ; Akkerman, AE; Brand, AN; Mulder, LJM

2003-01-01

In current research on mental workload and task performance a large gap exists between laboratory based studies and research projects in real life working practice. Tasks conducted within a laboratory environment often lack a strong resemblance with real life working situations. This paper presents

Analysis of Operators Comments on the PSF Questionnaire of the Task Complexity Experiment 2003/2004

Energy Technology Data Exchange (ETDEWEB)

Torralba, B.; Martinez-Arias, R.

2007-07-01

Human Reliability Analysis (HRA) methods usually take into account the effect of Performance Shaping Factors (PSF). Therefore, the adequate treatment of PSFs in HRA of Probabilistic Safety Assessment (PSA) models has a crucial importance. There is an important need for collecting PSF data based on simulator experiments. During the task complexity experiment 2003-2004, carried out in the BWR simulator of Halden Man-Machine Laboratory (HAMMLAB), there was a data collection on PSF by means of a PSF Questionnaire. Seven crews (composed of shift supervisor, reactor operator and turbine operator) from Swedish Nuclear Power Plants participated in the experiment. The PSF Questionnaire collected data on the factors: procedures, training and experience, indications, controls, team management, team communication, individual work practice, available time for the tasks, number of tasks or information load, masking and seriousness. The main statistical significant results are presented on Performance Shaping Factors data collection and analysis of the task complexity experiment 2003/2004 (HWR-810). The analysis of the comments about PSFs, which were provided by operators on the PSF Questionnaire, is described. It has been summarised the comments provided for each PSF on the scenarios, using a content analysis technique. (Author)

Analysis of Operators Comments on the PSF Questionnaire of the Task Complexity Experiment 2003/2004

International Nuclear Information System (INIS)

Torralba, B.; Martinez-Arias, R.

2007-01-01

Human Reliability Analysis (HRA) methods usually take into account the effect of Performance Shaping Factors (PSF). Therefore, the adequate treatment of PSFs in HRA of Probabilistic Safety Assessment (PSA) models has a crucial importance. There is an important need for collecting PSF data based on simulator experiments. During the task complexity experiment 2003-2004, carried out in the BWR simulator of Halden Man-Machine Laboratory (HAMMLAB), there was a data collection on PSF by means of a PSF Questionnaire. Seven crews (composed of shift supervisor, reactor operator and turbine operator) from Swedish Nuclear Power Plants participated in the experiment. The PSF Questionnaire collected data on the factors: procedures, training and experience, indications, controls, team management, team communication, individual work practice, available time for the tasks, number of tasks or information load, masking and seriousness. The main statistical significant results are presented on Performance Shaping Factors data collection and analysis of the task complexity experiment 2003/2004 (HWR-810). The analysis of the comments about PSFs, which were provided by operators on the PSF Questionnaire, is described. It has been summarised the comments provided for each PSF on the scenarios, using a content analysis technique. (Author)

Identifying optimum performance trade-offs using a cognitively bounded rational analysis model of discretionary task interleaving.

Science.gov (United States)

Janssen, Christian P; Brumby, Duncan P; Dowell, John; Chater, Nick; Howes, Andrew

2011-01-01

We report the results of a dual-task study in which participants performed a tracking and typing task under various experimental conditions. An objective payoff function was used to provide explicit feedback on how participants should trade off performance between the tasks. Results show that participants' dual-task interleaving strategy was sensitive to changes in the difficulty of the tracking task and resulted in differences in overall task performance. To test the hypothesis that people select strategies that maximize payoff, a Cognitively Bounded Rational Analysis model was developed. This analysis evaluated a variety of dual-task interleaving strategies to identify the optimal strategy for maximizing payoff in each condition. The model predicts that the region of optimum performance is different between experimental conditions. The correspondence between human data and the prediction of the optimal strategy is found to be remarkably high across a number of performance measures. This suggests that participants were honing their behavior to maximize payoff. Limitations are discussed. Copyright © 2011 Cognitive Science Society, Inc.

Task complexity, student perceptions of vocabulary learning in EFL, and task performance.

Science.gov (United States)

Wu, Xiaoli; Lowyck, Joost; Sercu, Lies; Elen, Jan

2013-03-01

The study deepened our understanding of how students' self-efficacy beliefs contribute to the context of teaching English as a foreign language in the framework of cognitive mediational paradigm at a fine-tuned task-specific level. The aim was to examine the relationship among task complexity, self-efficacy beliefs, domain-related prior knowledge, learning strategy use, and task performance as they were applied to English vocabulary learning from reading tasks. Participants were 120 second-year university students (mean age 21) from a Chinese university. This experiment had two conditions (simple/complex). A vocabulary level test was first conducted to measure participants' prior knowledge of English vocabulary. Participants were then randomly assigned to one of the learning tasks. Participants were administered task booklets together with the self-efficacy scales, measures of learning strategy use, and post-tests. Data obtained were submitted to multivariate analysis of variance (MANOVA) and path analysis. Results from the MANOVA model showed a significant effect of vocabulary level on self-efficacy beliefs, learning strategy use, and task performance. Task complexity showed no significant effect; however, an interaction effect between vocabulary level and task complexity emerged. Results from the path analysis showed self-efficacy beliefs had an indirect effect on performance. Our results highlighted the mediating role of self-efficacy beliefs and learning strategy use. Our findings indicate that students' prior knowledge plays a crucial role on both self-efficacy beliefs and task performance, and the predictive power of self-efficacy on task performance may lie in its association with learning strategy use. © 2011 The British Psychological Society.

Conjoint analysis applications in health--a checklist: a report of the ISPOR Good Research Practices for Conjoint Analysis Task Force.

Science.gov (United States)

Bridges, John F P; Hauber, A Brett; Marshall, Deborah; Lloyd, Andrew; Prosser, Lisa A; Regier, Dean A; Johnson, F Reed; Mauskopf, Josephine

2011-06-01

The application of conjoint analysis (including discrete-choice experiments and other multiattribute stated-preference methods) in health has increased rapidly over the past decade. A wider acceptance of these methods is limited by an absence of consensus-based methodological standards. The International Society for Pharmacoeconomics and Outcomes Research (ISPOR) Good Research Practices for Conjoint Analysis Task Force was established to identify good research practices for conjoint-analysis applications in health. The task force met regularly to identify the important steps in a conjoint analysis, to discuss good research practices for conjoint analysis, and to develop and refine the key criteria for identifying good research practices. ISPOR members contributed to this process through an extensive consultation process. A final consensus meeting was held to revise the article using these comments, and those of a number of international reviewers. Task force findings are presented as a 10-item checklist covering: 1) research question; 2) attributes and levels; 3) construction of tasks; 4) experimental design; 5) preference elicitation; 6) instrument design; 7) data-collection plan; 8) statistical analyses; 9) results and conclusions; and 10) study presentation. A primary question relating to each of the 10 items is posed, and three sub-questions examine finer issues within items. Although the checklist should not be interpreted as endorsing any specific methodological approach to conjoint analysis, it can facilitate future training activities and discussions of good research practices for the application of conjoint-analysis methods in health care studies. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

A Method for Functional Task Alignment Analysis of an Arthrocentesis Simulator.

Science.gov (United States)

Adams, Reid A; Gilbert, Gregory E; Buckley, Lisa A; Nino Fong, Rodolfo; Fuentealba, I Carmen; Little, Erika L

2018-05-16

During simulation-based education, simulators are subjected to procedures composed of a variety of tasks and processes. Simulators should functionally represent a patient in response to the physical action of these tasks. The aim of this work was to describe a method for determining whether a simulator does or does not have sufficient functional task alignment (FTA) to be used in a simulation. Potential performance checklist items were gathered from published arthrocentesis guidelines and aggregated into a performance checklist using Lawshe's method. An expert panel used this performance checklist and an FTA analysis questionnaire to evaluate a simulator's ability to respond to the physical actions required by the performance checklist. Thirteen items, from a pool of 39, were included on the performance checklist. Experts had mixed reviews of the simulator's FTA and its suitability for use in simulation. Unexpectedly, some positive FTA was found for several tasks where the simulator lacked functionality. By developing a detailed list of specific tasks required to complete a clinical procedure, and surveying experts on the simulator's response to those actions, educators can gain insight into the simulator's clinical accuracy and suitability. Unexpected of positive FTA ratings of function deficits suggest that further revision of the survey method is required.

Physical and cognitive task analysis in interventional radiology

Energy Technology Data Exchange (ETDEWEB)

Johnson, S [School of Psychology, University of Liverpool, Liverpool (United Kingdom); Healey, A [Royal Liverpool University Hospital, Liverpool (United Kingdom); Evans, J [Royal Liverpool University Hospital, Liverpool (United Kingdom); Murphy, M [Royal Liverpool University Hospital, Liverpool (United Kingdom); Crawshaw, M [Department of Psychology, University of Hull, Hull (United Kingdom); Gould, D [Royal Liverpool University Hospital, Liverpool (United Kingdom)

2006-01-15

AIM: To identify, describe and detail the cognitive thought processes, decision-making, and physical actions involved in the preparation and successful performance of core interventional radiology procedures. MATERIALS AND METHODS: Five commonly performed core interventional radiology procedures were selected for cognitive task analysis. Several examples of each procedure being performed by consultant interventional radiologists were videoed. The videos of those procedures, and the steps required for successful outcome, were analysed by a psychologist and an interventional radiologist. Once a skeleton algorithm of the procedures was defined, further refinement was achieved using individual interview techniques with consultant interventional radiologists. Additionally a critique of each iteration of the established algorithm was sought from non-participating independent consultant interventional radiologists. RESULTS: Detailed task descriptions and decision protocols were developed for five interventional radiology procedures (arterial puncture, nephrostomy, venous access, biopsy-using both ultrasound and computed tomography, and percutaneous transhepatic cholangiogram). Identical tasks performed within these procedures were identified and standardized within the protocols. CONCLUSIONS: Complex procedures were broken down and their constituent processes identified. This might be suitable for use as a training protocol to provide a universally acceptable safe practice at the most fundamental level. It is envisaged that data collected in this way can be used as an educational resource for trainees and could provide the basis for a training curriculum in interventional radiology. It will direct trainees towards safe practice of the highest standard. It will also provide performance objectives of a simulator model.

Physical and cognitive task analysis in interventional radiology

International Nuclear Information System (INIS)

Johnson, S.; Healey, A.; Evans, J.; Murphy, M.; Crawshaw, M.; Gould, D.

2006-01-01

AIM: To identify, describe and detail the cognitive thought processes, decision-making, and physical actions involved in the preparation and successful performance of core interventional radiology procedures. MATERIALS AND METHODS: Five commonly performed core interventional radiology procedures were selected for cognitive task analysis. Several examples of each procedure being performed by consultant interventional radiologists were videoed. The videos of those procedures, and the steps required for successful outcome, were analysed by a psychologist and an interventional radiologist. Once a skeleton algorithm of the procedures was defined, further refinement was achieved using individual interview techniques with consultant interventional radiologists. Additionally a critique of each iteration of the established algorithm was sought from non-participating independent consultant interventional radiologists. RESULTS: Detailed task descriptions and decision protocols were developed for five interventional radiology procedures (arterial puncture, nephrostomy, venous access, biopsy-using both ultrasound and computed tomography, and percutaneous transhepatic cholangiogram). Identical tasks performed within these procedures were identified and standardized within the protocols. CONCLUSIONS: Complex procedures were broken down and their constituent processes identified. This might be suitable for use as a training protocol to provide a universally acceptable safe practice at the most fundamental level. It is envisaged that data collected in this way can be used as an educational resource for trainees and could provide the basis for a training curriculum in interventional radiology. It will direct trainees towards safe practice of the highest standard. It will also provide performance objectives of a simulator model

Quantitative analysis of task selection for brain-computer interfaces

Science.gov (United States)

Llera, Alberto; Gómez, Vicenç; Kappen, Hilbert J.

2014-10-01

Objective. To assess quantitatively the impact of task selection in the performance of brain-computer interfaces (BCI). Approach. We consider the task-pairs derived from multi-class BCI imagery movement tasks in three different datasets. We analyze for the first time the benefits of task selection on a large-scale basis (109 users) and evaluate the possibility of transferring task-pair information across days for a given subject. Main results. Selecting the subject-dependent optimal task-pair among three different imagery movement tasks results in approximately 20% potential increase in the number of users that can be expected to control a binary BCI. The improvement is observed with respect to the best task-pair fixed across subjects. The best task-pair selected for each subject individually during a first day of recordings is generally a good task-pair in subsequent days. In general, task learning from the user side has a positive influence in the generalization of the optimal task-pair, but special attention should be given to inexperienced subjects. Significance. These results add significant evidence to existing literature that advocates task selection as a necessary step towards usable BCIs. This contribution motivates further research focused on deriving adaptive methods for task selection on larger sets of mental tasks in practical online scenarios.

Directionality analysis on functional magnetic resonance imaging during motor task using Granger causality.

Science.gov (United States)

Anwar, A R; Muthalib, M; Perrey, S; Galka, A; Granert, O; Wolff, S; Deuschl, G; Raethjen, J; Heute, U; Muthuraman, M

2012-01-01

Directionality analysis of signals originating from different parts of brain during motor tasks has gained a lot of interest. Since brain activity can be recorded over time, methods of time series analysis can be applied to medical time series as well. Granger Causality is a method to find a causal relationship between time series. Such causality can be referred to as a directional connection and is not necessarily bidirectional. The aim of this study is to differentiate between different motor tasks on the basis of activation maps and also to understand the nature of connections present between different parts of the brain. In this paper, three different motor tasks (finger tapping, simple finger sequencing, and complex finger sequencing) are analyzed. Time series for each task were extracted from functional magnetic resonance imaging (fMRI) data, which have a very good spatial resolution and can look into the sub-cortical regions of the brain. Activation maps based on fMRI images show that, in case of complex finger sequencing, most parts of the brain are active, unlike finger tapping during which only limited regions show activity. Directionality analysis on time series extracted from contralateral motor cortex (CMC), supplementary motor area (SMA), and cerebellum (CER) show bidirectional connections between these parts of the brain. In case of simple finger sequencing and complex finger sequencing, the strongest connections originate from SMA and CMC, while connections originating from CER in either direction are the weakest ones in magnitude during all paradigms.

Using plant procedures as the basis for conducting a job and task analysis

International Nuclear Information System (INIS)

Haynes, F.H.; Ruth, B.W.

1985-01-01

Plant procedures were selected, by Northeast Utilities (NU), as the basis for conducting Job and Task Analyses (JTA). The resultant JTA was used to design procedure based simulator training programs for Millstone 1, 2, and Connecticut Yankee. The task listings were both plant specific and exhibited excellent correlation to INPO's generic PWR and BWR task analyses. Using the procedures based method enabled us to perform the JTA using plant and training staff. This proved cost effective in terms of both time and money. Learning objectives developed from the JTA were easily justified and correlated directly to job performance within the context of the plant procedures. In addition, the analysis generated a comprehensive review of plant procedures and, conversely, the plant's normal procedure revision process generated an automatic trigger for updating the task data

Nuclear power plant personnel qualifications and training: TAPS: the task analysis profiling system. Volume 2

International Nuclear Information System (INIS)

Jorgensen, C.C.

1985-06-01

This report discusses an automated task analysis profiling system (TAPS) designed to provide a linking tool between the behaviors of nuclear power plant operators in performing their tasks and the measurement tools necessary to evaluate their in-plant performance. TAPS assists in the identification of the entry-level skill, knowledge, ability and attitude (SKAA) requirements for the various tasks and rapidly associates them with measurement tests and human factors principles. This report describes the development of TAPS and presents its first demonstration. It begins with characteristics of skilled human performance and proceeds to postulate a cognitive model to formally describe these characteristics. A method is derived for linking SKAA characteristics to measurement tests. The entire process is then automated in the form of a task analysis computer program. The development of the program is detailed and a user guide with annotated code listings and supporting test information is provided

Does complexity matter? Meta-analysis of learner performance in artificial grammar tasks.

Science.gov (United States)

Schiff, Rachel; Katan, Pesia

2014-01-01

Complexity has been shown to affect performance on artificial grammar learning (AGL) tasks (categorization of test items as grammatical/ungrammatical according to the implicitly trained grammar rules). However, previously published AGL experiments did not utilize consistent measures to investigate the comprehensive effect of grammar complexity on task performance. The present study focused on computerizing Bollt and Jones's (2000) technique of calculating topological entropy (TE), a quantitative measure of AGL charts' complexity, with the aim of examining associations between grammar systems' TE and learners' AGL task performance. We surveyed the literature and identified 56 previous AGL experiments based on 10 different grammars that met the sampling criteria. Using the automated matrix-lift-action method, we assigned a TE value for each of these 10 previously used AGL systems and examined its correlation with learners' task performance. The meta-regression analysis showed a significant correlation, demonstrating that the complexity effect transcended the different settings and conditions in which the categorization task was performed. The results reinforced the importance of using this new automated tool to uniformly measure grammar systems' complexity when experimenting with and evaluating the findings of AGL studies.

Increasing Pizza Box Assembly Using Task Analysis and a Least-to-Most Prompting Hierarchy

Science.gov (United States)

Stabnow, Erin F.

2015-01-01

This study was designed to use a task analysis and a least-to-most prompting hierarchy to teach students with cognitive disabilities pizza box assembly skills. The purpose of this study was to determine whether a least-to-most prompting hierarchy was effective in teaching students with cognitive disabilities to increase the number of task-analyzed…

A human error analysis methodology, AGAPE-ET, for emergency tasks in nuclear power plants and its application

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Whan; Jung, Won Dea [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-03-01

This report presents a procedurised human reliability analysis (HRA) methodology, AGAPE-ET (A Guidance And Procedure for Human Error Analysis for Emergency Tasks), for both qualitative error analysis and quantification of human error probability (HEP) of emergency tasks in nuclear power plants. The AGAPE-ET is based on the simplified cognitive model. By each cognitive function, error causes or error-likely situations have been identified considering the characteristics of the performance of each cognitive function and influencing mechanism of PIFs on the cognitive function. Then, error analysis items have been determined from the identified error causes or error-likely situations to help the analysts cue or guide overall human error analysis. A human error analysis procedure based on the error analysis items is organised. The basic scheme for the quantification of HEP consists in the multiplication of the BHEP assigned by the error analysis item and the weight from the influencing factors decision tree (IFDT) constituted by cognitive function. The method can be characterised by the structured identification of the weak points of the task required to perform and the efficient analysis process that the analysts have only to carry out with the necessary cognitive functions. The report also presents the the application of AFAPE-ET to 31 nuclear emergency tasks and its results. 42 refs., 7 figs., 36 tabs. (Author)

Using task analysis to generate evidence for strengthening midwifery education, practice, and regulation in Ethiopia.

Science.gov (United States)

Yigzaw, Tegbar; Carr, Catherine; Stekelenburg, Jelle; van Roosmalen, Jos; Gibson, Hannah; Gelagay, Mintwab; Admassu, Azeb

2016-01-01

Realizing aspirations for meeting the global reproductive, maternal, newborn, and child health goals depends not only on increasing the numbers but also on improving the capability of midwifery workforce. We conducted a task analysis study to identify the needs for strengthening the midwifery workforce in Ethiopia. We conducted a cross-sectional study of recently qualified midwives in Ethiopia. Purposively selected participants from representative geographic and practice settings completed a self-administered questionnaire, making judgments about the frequency of performance, criticality, competence, and location of training for a list of validated midwifery tasks. Using Statistical Package for the Social Sciences, Version 20, we computed the percentages and averages to describe participant and practice characteristics. We identified priority preservice education gaps by considering the tasks least frequently learned in preservice, most frequently mentioned for not being trained, and had the highest not capable response. Identification of top priorities for in-service training considered tasks with highest "not capable" and "never" done responses. We determined the licensing exam blueprint by weighing the composite mean scores for frequency and criticality variables and expert rating across practice categories. One hundred and thirty-eight midwives participated in the study. The majority of respondents recognized the importance of midwifery tasks (89%), felt they were capable (91.8%), reported doing them frequently (63.9%), and learned them during preservice education (56.3%). We identified competence gaps in tasks related to obstetric complications, gynecology, public health, professional duties, and prevention of mother to child transmission of HIV. Moreover, our study helped to determine composition of the licensing exam for university graduates. The task analysis indicates that midwives provide critical reproductive, maternal, newborn, and child health care

Using task analysis to generate evidence for strengthening midwifery education, practice, and regulation in Ethiopia

Science.gov (United States)

Yigzaw, Tegbar; Carr, Catherine; Stekelenburg, Jelle; van Roosmalen, Jos; Gibson, Hannah; Gelagay, Mintwab; Admassu, Azeb

2016-01-01

Purpose Realizing aspirations for meeting the global reproductive, maternal, newborn, and child health goals depends not only on increasing the numbers but also on improving the capability of midwifery workforce. We conducted a task analysis study to identify the needs for strengthening the midwifery workforce in Ethiopia. Methods We conducted a cross-sectional study of recently qualified midwives in Ethiopia. Purposively selected participants from representative geographic and practice settings completed a self-administered questionnaire, making judgments about the frequency of performance, criticality, competence, and location of training for a list of validated midwifery tasks. Using Statistical Package for the Social Sciences, Version 20, we computed the percentages and averages to describe participant and practice characteristics. We identified priority preservice education gaps by considering the tasks least frequently learned in preservice, most frequently mentioned for not being trained, and had the highest not capable response. Identification of top priorities for in-service training considered tasks with highest “not capable” and “never” done responses. We determined the licensing exam blueprint by weighing the composite mean scores for frequency and criticality variables and expert rating across practice categories. Results One hundred and thirty-eight midwives participated in the study. The majority of respondents recognized the importance of midwifery tasks (89%), felt they were capable (91.8%), reported doing them frequently (63.9%), and learned them during preservice education (56.3%). We identified competence gaps in tasks related to obstetric complications, gynecology, public health, professional duties, and prevention of mother to child transmission of HIV. Moreover, our study helped to determine composition of the licensing exam for university graduates. Conclusion The task analysis indicates that midwives provide critical reproductive

Dexterity: A MATLAB-based analysis software suite for processing and visualizing data from tasks that measure arm or forelimb function.

Science.gov (United States)

Butensky, Samuel D; Sloan, Andrew P; Meyers, Eric; Carmel, Jason B

2017-07-15

Hand function is critical for independence, and neurological injury often impairs dexterity. To measure hand function in people or forelimb function in animals, sensors are employed to quantify manipulation. These sensors make assessment easier and more quantitative and allow automation of these tasks. While automated tasks improve objectivity and throughput, they also produce large amounts of data that can be burdensome to analyze. We created software called Dexterity that simplifies data analysis of automated reaching tasks. Dexterity is MATLAB software that enables quick analysis of data from forelimb tasks. Through a graphical user interface, files are loaded and data are identified and analyzed. These data can be annotated or graphed directly. Analysis is saved, and the graph and corresponding data can be exported. For additional analysis, Dexterity provides access to custom scripts created by other users. To determine the utility of Dexterity, we performed a study to evaluate the effects of task difficulty on the degree of impairment after injury. Dexterity analyzed two months of data and allowed new users to annotate the experiment, visualize results, and save and export data easily. Previous analysis of tasks was performed with custom data analysis, requiring expertise with analysis software. Dexterity made the tools required to analyze, visualize and annotate data easy to use by investigators without data science experience. Dexterity increases accessibility to automated tasks that measure dexterity by making analysis of large data intuitive, robust, and efficient. Copyright © 2017 Elsevier B.V. All rights reserved.

Underground Test Area Subproject Phase I Data Analysis Task. Volume VIII - Risk Assessment Documentation Package

Energy Technology Data Exchange (ETDEWEB)

None

1996-12-01

Volume VIII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the risk assessment documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

Reuse-centric Requirements Analysis with Task Models, Scenarios, and Critical Parameters

Directory of Open Access Journals (Sweden)

Cyril Montabert

2007-02-01

Full Text Available This paper outlines a requirements-analysis process that unites task models, scenarios, and critical parameters to exploit and generate reusable knowledge at the requirements phase. Through the deployment of a critical-parameter-based approach to task modeling, the process yields the establishment of an integrative and formalized model issued from scenarios that can be used for requirements characterization. Furthermore, not only can this entity serve as interface to a knowledge repository relying on a critical-parameter-based taxonomy to support reuse but its characterization in terms of critical parameters also allows the model to constitute a broader reuse solution. We discuss our vision for a user-centric and reuse-centric approach to requirements analysis, present previous efforts implicated with this line of work, and state the revisions brought to extend the reuse potential and effectiveness of a previous iteration of a requirements tool implementing such process. Finally, the paper describes the sequence and nature of the activities involved with the conduct of our proposed requirements-analysis technique, concluding by previewing ongoing work in the field that will explore the feasibility for designers to use our approach.

Latent human error analysis and efficient improvement strategies by fuzzy TOPSIS in aviation maintenance tasks.

Science.gov (United States)

Chiu, Ming-Chuan; Hsieh, Min-Chih

2016-05-01

The purposes of this study were to develop a latent human error analysis process, to explore the factors of latent human error in aviation maintenance tasks, and to provide an efficient improvement strategy for addressing those errors. First, we used HFACS and RCA to define the error factors related to aviation maintenance tasks. Fuzzy TOPSIS with four criteria was applied to evaluate the error factors. Results show that 1) adverse physiological states, 2) physical/mental limitations, and 3) coordination, communication, and planning are the factors related to airline maintenance tasks that could be addressed easily and efficiently. This research establishes a new analytic process for investigating latent human error and provides a strategy for analyzing human error using fuzzy TOPSIS. Our analysis process complements shortages in existing methodologies by incorporating improvement efficiency, and it enhances the depth and broadness of human error analysis methodology. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Development of calibration training and procedures using job-task analysis

Energy Technology Data Exchange (ETDEWEB)

Smith, R.A.

1993-12-01

Efforts to handle an increased workload with dwindling manpower in the Physical and Electrical Standards Laboratory (Standards Lab) at the Oak Ridge Y-12 Plant are described. Empowerment of workers via Total Quality Management (TQM) is the basis for their efforts. A survey and follow-up team work was the course of action. The job-task analysis received honors by their peers at the Y-12 Plant.

Introducing People – Genre Analysis and Oral Comprehension and Oral Production Tasks

Directory of Open Access Journals (Sweden)

Keila Rocha Reis de Carvalho

2012-02-01

Full Text Available This paper aims at presenting an analysis of the genre introducing people and at suggesting listening comprehension and oral production tasks. This work was developed according to the characterization of the rhetorical organization of situations taken from seventeen films that contain the genre under analysis. Although several studies in the ESP area carried out recently (Andrade, 2003; Cardoso, 2003; Shergue, 2003; Belmonte, 2003; Serafini, 2003 have identified listening comprehension and oral production as the abilities that should be prioritized in an English course, much needs to be done, especially concerning the oral genres that take into account the language the learners of English as a second language need in their target situation. This work is based on Hutchinson & Waters (1987 theoretical background on ESP, Swales’ (1990 genre analysis, Ramos’ (2004 pedagogical proposal, and also on Ellis´ (2003 tasks concept. The familiarization of learners of English as a second language with this genre will provide them with the opportunity to better understand and use the English language in their academic and professional life.

Gait disorders in the elderly and dual task gait analysis: a new approach for identifying motor phenotypes.

Science.gov (United States)

Auvinet, Bernard; Touzard, Claude; Montestruc, François; Delafond, Arnaud; Goeb, Vincent

2017-01-31

Gait disorders and gait analysis under single and dual-task conditions are topics of great interest, but very few studies have looked for the relevance of gait analysis under dual-task conditions in elderly people on the basis of a clinical approach. An observational study including 103 patients (mean age 76.3 ± 7.2, women 56%) suffering from gait disorders or memory impairment was conducted. Gait analysis under dual-task conditions was carried out for all patients. Brain MRI was performed in the absence of contra-indications. Three main gait variables were measured: walking speed, stride frequency, and stride regularity. For each gait variable, the dual task cost was computed and a quartile analysis was obtained. Nonparametric tests were used for all the comparisons (Wilcoxon, Kruskal-Wallis, Fisher or Chi 2 tests). Four clinical subgroups were identified: gait instability (45%), recurrent falls (29%), memory impairment (18%), and cautious gait (8%). The biomechanical severity of these subgroups was ordered according to walking speed and stride regularity under both conditions, from least to most serious as follows: memory impairment, gait instability, recurrent falls, cautious gait (p < 0.01 for walking speed, p = 0.05 for stride regularity). According to the established diagnoses of gait disorders, 5 main pathological subgroups were identified (musculoskeletal diseases (n = 11), vestibular diseases (n = 6), mild cognitive impairment (n = 24), central nervous system pathologies, (n = 51), and without diagnosis (n = 8)). The dual task cost for walking speed, stride frequency and stride regularity were different among these subgroups (p < 0.01). The subgroups mild cognitive impairment and central nervous system pathologies both showed together a higher dual task cost for each variable compared to the other subgroups combined (p = 0.01). The quartile analysis of dual task cost for stride frequency and stride regularity

Proposal of Constraints Analysis Method Based on Network Model for Task Planning

Science.gov (United States)

Tomiyama, Tomoe; Sato, Tatsuhiro; Morita, Toyohisa; Sasaki, Toshiro

Deregulation has been accelerating several activities toward reengineering business processes, such as railway through service and modal shift in logistics. Making those activities successful, business entities have to regulate new business rules or know-how (we call them ‘constraints’). According to the new constraints, they need to manage business resources such as instruments, materials, workers and so on. In this paper, we propose a constraint analysis method to define constraints for task planning of the new business processes. To visualize each constraint's influence on planning, we propose a network model which represents allocation relations between tasks and resources. The network can also represent task ordering relations and resource grouping relations. The proposed method formalizes the way of defining constraints manually as repeatedly checking the network structure and finding conflicts between constraints. Being applied to crew scheduling problems shows that the method can adequately represent and define constraints of some task planning problems with the following fundamental features, (1) specifying work pattern to some resources, (2) restricting the number of resources for some works, (3) requiring multiple resources for some works, (4) prior allocation of some resources to some works and (5) considering the workload balance between resources.

Underground Test Area Subproject Phase I Data Analysis Task. Volume VII - Tritium Transport Model Documentation Package

Energy Technology Data Exchange (ETDEWEB)

None

1996-12-01

Volume VII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the tritium transport model documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

One Size Does Not Fit All: Human Failure Event Decomposition and Task Analysis

Energy Technology Data Exchange (ETDEWEB)

Ronald Laurids Boring, PhD

2014-09-01

In the probabilistic safety assessments (PSAs) used in the nuclear industry, human failure events (HFEs) are determined as a subset of hardware failures, namely those hardware failures that could be triggered or exacerbated by human action or inaction. This approach is top-down, starting with hardware faults and deducing human contributions to those faults. Elsewhere, more traditionally human factors driven approaches would tend to look at opportunities for human errors first in a task analysis and then identify which of those errors is risk significant. The intersection of top-down and bottom-up approaches to defining HFEs has not been carefully studied. Ideally, both approaches should arrive at the same set of HFEs. This question remains central as human reliability analysis (HRA) methods are generalized to new domains like oil and gas. The HFEs used in nuclear PSAs tend to be top-down—defined as a subset of the PSA—whereas the HFEs used in petroleum quantitative risk assessments (QRAs) are more likely to be bottom-up—derived from a task analysis conducted by human factors experts. The marriage of these approaches is necessary in order to ensure that HRA methods developed for top-down HFEs are also sufficient for bottom-up applications. In this paper, I first review top-down and bottom-up approaches for defining HFEs and then present a seven-step guideline to ensure a task analysis completed as part of human error identification decomposes to a level suitable for use as HFEs. This guideline illustrates an effective way to bridge the bottom-up approach with top-down requirements.

Validity of the alcohol purchase task: a meta-analysis.

Science.gov (United States)

Kiselica, Andrew M; Webber, Troy A; Bornovalova, Marina A

2016-05-01

Behavioral economists assess alcohol consumption as a function of unit price. This method allows construction of demand curves and demand indices, which are thought to provide precise numerical estimates of risk for alcohol problems. One of the more commonly used behavioral economic measures is the Alcohol Purchase Task (APT). Although the APT has shown promise as a measure of risk for alcohol problems, the construct validity and incremental utility of the APT remain unclear. This paper presents a meta-analysis of the APT literature. Sixteen studies were included in the meta-analysis. Studies were gathered via searches of the PsycInfo, PubMed, Web of Science and EconLit research databases. Random-effects meta-analyses with inverse variance weighting were used to calculate summary effect sizes for each demand index-drinking outcome relationship. Moderation of these effects by drinking status (regular versus heavy drinkers) was examined. Additionally, tests of the incremental utility of the APT indices in predicting drinking problems above and beyond measuring alcohol consumption were performed. The APT indices were correlated in the expected directions with drinking outcomes, although many effects were small in size. These effects were typically not moderated by the drinking status of the samples. Additionally, the intensity metric demonstrated incremental utility in predicting alcohol use disorder symptoms beyond measuring drinking. The Alcohol Purchase Task appears to have good construct validity, but limited incremental utility in estimating risk for alcohol problems. © 2015 Society for the Study of Addiction.

ALE Meta-Analysis of Schizophrenics Performing the N-Back Task

Science.gov (United States)

Harrell, Zachary

2010-10-01

MRI/fMRI has already proven itself as a valuable tool in the diagnosis and treatment of many illnesses of the brain, including cognitive problems. By exploiting the differences in magnetic susceptibility between oxygenated and deoxygenated hemoglobin, fMRI can measure blood flow in various regions of interest within the brain. This can determine the level of brain activity in relation to motor or cognitive functions and provide a metric for tissue damage or illness symptoms. Structural imaging techniques have shown lesions or deficiencies in tissue volumes in schizophrenics corresponding to areas primarily in the frontal and temporal lobes. These areas are currently known to be involved in working memory and attention, which many schizophrenics have trouble with. The ALE (Activation Likelihood Estimation) Meta-Analysis is able to statistically determine the significance of brain area activations based on the post-hoc combination of multiple studies. This process is useful for giving a general model of brain function in relation to a particular task designed to engage the affected areas (such as working memory for the n-back task). The advantages of the ALE Meta-Analysis include elimination of single subject anomalies, elimination of false/extremely weak activations, and verification of function/location hypotheses.

Monitoring supports performance in a dual-task paradigm involving a risky decision-making task and a working memory task

Directory of Open Access Journals (Sweden)

Bettina eGathmann

2015-02-01

Full Text Available Performing two cognitively demanding tasks at the same time is known to decrease performance. The current study investigates the underlying executive functions of a dual-tasking situation involving the simultaneous performance of decision making under explicit risk and a working memory task. It is suggested that making a decision and performing a working memory task at the same time should particularly require monitoring - an executive control process supervising behavior and the state of processing on two tasks. To test the role of a supervisory/monitoring function in such a dual-tasking situation we investigated 122 participants with the Game of Dice Task plus 2-back task (GDT plus 2-back task. This dual task requires participants to make decisions under risk and to perform a 2-back working memory task at the same time. Furthermore, a task measuring a set of several executive functions gathered in the term concept formation (Modified Card Sorting Test, MCST and the newly developed Balanced Switching Task (BST, measuring monitoring in particular, were used. The results demonstrate that concept formation and monitoring are involved in the simultaneous performance of decision making under risk and a working memory task. In particular, the mediation analysis revealed that BST performance partially mediates the influence of MCST performance on the GDT plus 2-back task. These findings suggest that monitoring is one important subfunction for superior performance in a dual-tasking situation including decision making under risk and a working memory task.

Monitoring supports performance in a dual-task paradigm involving a risky decision-making task and a working memory task

Science.gov (United States)

Gathmann, Bettina; Schiebener, Johannes; Wolf, Oliver T.; Brand, Matthias

2015-01-01

Performing two cognitively demanding tasks at the same time is known to decrease performance. The current study investigates the underlying executive functions of a dual-tasking situation involving the simultaneous performance of decision making under explicit risk and a working memory task. It is suggested that making a decision and performing a working memory task at the same time should particularly require monitoring—an executive control process supervising behavior and the state of processing on two tasks. To test the role of a supervisory/monitoring function in such a dual-tasking situation we investigated 122 participants with the Game of Dice Task plus 2-back task (GDT plus 2-back task). This dual task requires participants to make decisions under risk and to perform a 2-back working memory task at the same time. Furthermore, a task measuring a set of several executive functions gathered in the term concept formation (Modified Card Sorting Test, MCST) and the newly developed Balanced Switching Task (BST), measuring monitoring in particular, were used. The results demonstrate that concept formation and monitoring are involved in the simultaneous performance of decision making under risk and a working memory task. In particular, the mediation analysis revealed that BST performance partially mediates the influence of MCST performance on the GDT plus 2-back task. These findings suggest that monitoring is one important subfunction for superior performance in a dual-tasking situation including decision making under risk and a working memory task. PMID:25741308

Boundary error analysis and categorization in the TRECVID news story segmentation task

NARCIS (Netherlands)

Arlandis, J.; Over, P.; Kraaij, W.

2005-01-01

In this paper, an error analysis based on boundary error popularity (frequency) including semantic boundary categorization is applied in the context of the news story segmentation task from TRECVTD1. Clusters of systems were defined based on the input resources they used including video, audio and

Aligning Event Logs to Task-Time Matrix Clinical Pathways in BPMN for Variance Analysis.

Science.gov (United States)

Yan, Hui; Van Gorp, Pieter; Kaymak, Uzay; Lu, Xudong; Ji, Lei; Chiau, Choo Chiap; Korsten, Hendrikus H M; Duan, Huilong

2018-03-01

Clinical pathways (CPs) are popular healthcare management tools to standardize care and ensure quality. Analyzing CP compliance levels and variances is known to be useful for training and CP redesign purposes. Flexible semantics of the business process model and notation (BPMN) language has been shown to be useful for the modeling and analysis of complex protocols. However, in practical cases one may want to exploit that CPs often have the form of task-time matrices. This paper presents a new method parsing complex BPMN models and aligning traces to the models heuristically. A case study on variance analysis is undertaken, where a CP from the practice and two large sets of patients data from an electronic medical record (EMR) database are used. The results demonstrate that automated variance analysis between BPMN task-time models and real-life EMR data are feasible, whereas that was not the case for the existing analysis techniques. We also provide meaningful insights for further improvement.

Using Goal Setting and Task Analysis to Enhance Task-Based Language Learning and Teaching

Science.gov (United States)

Rubin, Joan

2015-01-01

Task-Based Language Learning and Teaching has received sustained attention from teachers and researchers for over thirty years. It is a well-established pedagogy that includes the following characteristics: major focus on authentic and real-world tasks, choice of linguistic resources by learners, and a clearly defined non-linguistic outcome. This…

Task versus relationship conflict, team performance and team member satisfaction: a meta-analysis

NARCIS (Netherlands)

de Dreu, C.K.W.; Weingart, L.R.

2003-01-01

This study provides a meta-analysis of research on the associations between relationship conflict, task conflict, team performance, and team member satisfaction. Consistent with past theorizing, resultsrevealed strong and negative correlations between relationship conflict, team performance, and

Safety analysis of patient transfers and handling tasks.

Science.gov (United States)

Vieira, Er; Kumar, S

2009-10-01

Low-back disorders are related to biomechanical demands, and nurses are among the professionals with the highest rates. Quantification of risk factors is important for safety assessment and reduction of low-back disorders. This study aimed to quantify physical demands of frequent nursing tasks and provide evidence-based recommendations to increase low-back safety. Thirty-six volunteer female nurses participated in a cross-sectional study of nine nursing tasks. Lumbar range of motion (ROM) and motion during nursing tasks were measured. Compression and shear forces at L5/S1, ligament strain and percentage of population without sufficient torso strength to perform 14 phases of nine nursing tasks were estimated. Peak flexions during trolley-to-bed, bed-to-chair and chair-to-bed transfers reached the maximum flexion ROM of the nurses. Average lumbar flexion during trolley-to-bed transfers was >50% of flexion ROM, being higher than during all other tasks. Mean (SD) compression at L5/S1 (4754 N (437 N)) and population without sufficient torso strength (37% (9%)) were highest during the pushing phase of bed-to-trolley transfers. Shear force (487 N (40 N)) and ligament strain (14% (5%)) were highest during the pulling phase of trolley-to-bed transfers. Nursing tasks impose high biomechanical demands on the lumbar spine. Excessive lumbar flexion and forces are critical aspects of manual transfers requiring most of the nurses' capabilities. Evidence-based recommendations to improve low-back safety in common nursing tasks were provided. Fitness to work, job modifications and training programs can now be designed and assessed based on the results.

Using task analysis to generate evidence for strengthening midwifery education, practice, and regulation in Ethiopia

Directory of Open Access Journals (Sweden)

Yigzaw T

2016-05-01

Full Text Available Tegbar Yigzaw,1 Catherine Carr,2 Jelle Stekelenburg,3,4 Jos van Roosmalen,5 Hannah Gibson,1 Mintwab Gelagay,1 Azeb Admassu6 1Jhpiego, Addis Ababa, Ethiopia; 2Jhpiego, Washington DC, USA; 3Department of Obstetrics and Gynecology, Leeuwarden Medical Centre, Leeuwarden, 4Department of Health Sciences, Global Health, University Medical Centre Groningen, University of Groningen, Groningen, 5Faculty of Earth and Life Sciences, Vrije Universiteit, Amsterdam, the Netherlands; 6Federal Ministry of Health, Addis Ababa, Ethiopia Purpose: Realizing aspirations for meeting the global reproductive, maternal, newborn, and child health goals depends not only on increasing the numbers but also on improving the capability of midwifery workforce. We conducted a task analysis study to identify the needs for strengthening the midwifery workforce in Ethiopia. Methods: We conducted a cross-sectional study of recently qualified midwives in Ethiopia. Purposively selected participants from representative geographic and practice settings completed a self-administered questionnaire, making judgments about the frequency of performance, criticality, competence, and location of training for a list of validated midwifery tasks. Using Statistical Package for the Social Sciences, Version 20, we computed the percentages and averages to describe participant and practice characteristics. We identified priority preservice education gaps by considering the tasks least frequently learned in preservice, most frequently mentioned for not being trained, and had the highest not capable response. Identification of top priorities for in-service training considered tasks with highest “not capable” and “never” done responses. We determined the licensing exam blueprint by weighing the composite mean scores for frequency and criticality variables and expert rating across practice categories. Results: One hundred and thirty-eight midwives participated in the study. The majority of

Analysis and Modeling of Control Tasks in Dynamic Systems

DEFF Research Database (Denmark)

Ursem, Rasmus Kjær; Krink, Thiemo; Jensen, Mikkel Thomas

2002-01-01

Most applications of evolutionary algorithms deal with static optimization problems. However, in recent years, there has been a growing interest in time-varying (dynamic) problems, which are typically found in real-world scenarios. One major challenge in this field is the design of realistic test......-case generators (TCGs), which requires a systematic analysis of dynamic optimization tasks. So far, only a few TCGs have been suggested. Our investigation leads to the conclusion that these TCGs are not capable of generating realistic dynamic benchmark tests. The result of our research is the design of a new TCG...

Bayesian network analysis revealed the connectivity difference of the default mode network from the resting-state to task-state

Science.gov (United States)

Wu, Xia; Yu, Xinyu; Yao, Li; Li, Rui

2014-01-01

Functional magnetic resonance imaging (fMRI) studies have converged to reveal the default mode network (DMN), a constellation of regions that display co-activation during resting-state but co-deactivation during attention-demanding tasks in the brain. Here, we employed a Bayesian network (BN) analysis method to construct a directed effective connectivity model of the DMN and compared the organizational architecture and interregional directed connections under both resting-state and task-state. The analysis results indicated that the DMN was consistently organized into two closely interacting subsystems in both resting-state and task-state. The directed connections between DMN regions, however, changed significantly from the resting-state to task-state condition. The results suggest that the DMN intrinsically maintains a relatively stable structure whether at rest or performing tasks but has different information processing mechanisms under varied states. PMID:25309414

Cognitive Task Analysis for Instruction in Single-Injection Ultrasound Guided-Regional Anesthesia

Science.gov (United States)

Gucev, Gligor V.

2012-01-01

Cognitive task analysis (CTA) is methodology for eliciting knowledge from subject matter experts. CTA has been used to capture the cognitive processes, decision-making, and judgments that underlie expert behaviors. A review of the literature revealed that CTA has not yet been used to capture the knowledge required to perform ultrasound guided…

ANALYSIS OF THE GAZE BEHAVIOUR OF THE WORKER ON THE CARBURETOR ASSEMBLY TASK

Directory of Open Access Journals (Sweden)

Novie Susanto

2015-06-01

Full Text Available This study presents analysis of the area of interest (AOI and the gaze behavior of human during assembly task. This study aims at investigating the human behavior in detail using an eye‐tracking system during assembly task using LEGO brick and an actual manufactured product, a carburetor. An analysis using heat map data based on the recorded videos from the eye-tracking system is taken into account to examine and investigate the gaze behavior of human. The results of this study show that the carburetor assembly requires more attention than the product made from LEGO bricks. About 50% of the participants experience the necessity to visually inspect the interim state of the work object during the simulation of the assembly sequence on the screen. They also show the tendency to want to be more certain about part fitting in the actual work object.

A task specific uncertainty analysis method for least-squares-based form characterization of ultra-precision freeform surfaces

International Nuclear Information System (INIS)

Ren, M J; Cheung, C F; Kong, L B

2012-01-01

In the measurement of ultra-precision freeform surfaces, least-squares-based form characterization methods are widely used to evaluate the form error of the measured surfaces. Although many methodologies have been proposed in recent years to improve the efficiency of the characterization process, relatively little research has been conducted on the analysis of associated uncertainty in the characterization results which may result from those characterization methods being used. As a result, this paper presents a task specific uncertainty analysis method with application in the least-squares-based form characterization of ultra-precision freeform surfaces. That is, the associated uncertainty in the form characterization results is estimated when the measured data are extracted from a specific surface with specific sampling strategy. Three factors are considered in this study which include measurement error, surface form error and sample size. The task specific uncertainty analysis method has been evaluated through a series of experiments. The results show that the task specific uncertainty analysis method can effectively estimate the uncertainty of the form characterization results for a specific freeform surface measurement

Upper Extremity Motor Learning among Individuals with Parkinson's Disease: A Meta-Analysis Evaluating Movement Time in Simple Tasks

Directory of Open Access Journals (Sweden)

K. Felix

2012-01-01

Full Text Available Motor learning has been found to occur in the rehabilitation of individuals with Parkinson's disease (PD. Through repetitive structured practice of motor tasks, individuals show improved performance, confirming that motor learning has probably taken place. Although a number of studies have been completed evaluating motor learning in people with PD, the sample sizes were small and the improvements were variable. The purpose of this meta-analysis was to determine the ability of people with PD to learn motor tasks. Studies which measured movement time in upper extremity reaching tasks and met the inclusion criteria were included in the analysis. Results of the meta-analysis indicated that people with PD and neurologically healthy controls both demonstrated motor learning, characterized by a decrease in movement time during upper extremity movements. Movement time improvements were greater in the control group than in individuals with PD. These results support the findings that the practice of upper extremity reaching tasks is beneficial in reducing movement time in persons with PD and has important implications for rehabilitation.

Wristbands as aids to reduce misidentification: an ethnographically guided task analysis.

Science.gov (United States)

Smith, Andrew F; Casey, Kate; Wilson, James; Fischbacher-Smith, Denis

2011-10-01

Wristbands are recommended in the UK as a means of verifying patient identity but have been little studied. We aimed to document how wristbands are used in practice. and participants Task analysis of wristband application and use, drawing on qualitative analysis of workplace observation of, and interviews with, clinical and non-clinical staff. Two acute district general hospitals in northern England. Our findings indicate high levels of awareness amongst clinical staff of local and national policies on wristband use, but some ambiguity about the details therein. In contrast, non-clinical staff such as ward clerks and porters were less aware of policy, although their actions also expose patients to risks resulting from misidentification. Of seven subtasks identified by the task analysis of wristband application and use, three appeared to offer particular opportunity for error. Making the decision to apply, especially in emergency patients, is important because delay in application can delay correct identification. Advance preparation of wristbands for elective admission without the patient being present can risk erroneous data or misapplication. Lastly, utilization of wristbands to verify patient identity was greater in some clinical circumstances (blood transfusion and medication administration) than in others (before transferring patients around the hospital and during handovers of care). Wristbands for patient identification are not being used to their full potential. Attention to detail in application and use, especially during handover and transfer, and an appreciation of the role played by 'non-clinical' staff, may offer further gains in patient safety.

Set-based Tasks within the Singularity-robust Multiple Task-priority Inverse Kinematics Framework: General Formulation, Stability Analysis and Experimental Results

Directory of Open Access Journals (Sweden)

Signe eMoe

2016-04-01

Full Text Available Inverse kinematics algorithms are commonly used in robotic systems to transform tasks to joint references, and several methods exist to ensure the achievement of several tasks simultaneously. The multiple task-priority inverse kinematicsframework allows tasks to be considered in a prioritized order by projecting task velocities through the nullspaces of higherpriority tasks. This paper extends this framework to handle setbased tasks, i.e. tasks with a range of valid values, in addition to equality tasks, which have a specific desired value. Examples of set-based tasks are joint limit and obstacle avoidance. The proposed method is proven to ensure asymptotic convergence of the equality task errors and the satisfaction of all high-priority set-based tasks. The practical implementation of the proposed algorithm is discussed, and experimental results are presented where a number of both set-based and equality tasks have been implemented on a 6 degree of freedom UR5 which is an industrial robotic arm from Universal Robots. The experiments validate thetheoretical results and confirm the effectiveness of the proposed approach.

Self-narrative reconstruction in emotion-focused therapy: A preliminary task analysis.

Science.gov (United States)

Cunha, Carla; Mendes, Inês; Ribeiro, António P; Angus, Lynne; Greenberg, Leslie S; Gonçalves, Miguel M

2017-11-01

This research explored the consolidation phase of emotion-focused therapy (EFT) for depression and studies-through a task-analysis method-how client-therapist dyads evolved from the exploration of the problem to self-narrative reconstruction. Innovative moments (IMs) were used to situate the process of self-narrative reconstruction within sessions, particularly through reconceptualization and performing change IMs. We contrasted the observation of these occurrences with a rational model of self-narrative reconstruction, previously built. This study presents the rational model and the revised rational-empirical model of the self-narrative reconstruction task in three EFT dyads, suggesting nine steps necessary for task resolution: (1) Explicit recognition of differences in the present and steps in the path of change; (2) Development of a meta-perspective contrast between present self and past self; (3) Amplification of contrast in the self; (4) A positive appreciation of changes is conveyed; (5) Occurrence of feelings of empowerment, competence, and mastery; (6) Reference to difficulties still present; (7) Emphasis on the loss of centrality of the problem; (8) Perception of change as a gradual, developing process; and (9) Reference to projects, experiences of change, or elaboration of new plans. Central aspects of therapist activity in facilitating the client's progression along these nine steps are also elaborated.

Concurrent multidisciplinary mechanical design based on design task analysis and knowledge sharing; Sekkei task bunseki to joho kyoyu ni yoru mechatronics kyocho sekkei

Energy Technology Data Exchange (ETDEWEB)

Kondo, K.; Ozawa, M.; Mori, T. [Toshiba Corp., Tokyo (Japan)

1999-09-01

We have developed a systematic design task planning method based on a design structure matrix(DSM) and a lumped model- based framework for knowledge sharing in a concurrent design environment as key techniques for developing higher quality products in a shorter design time. The DSM facilitates systematic analysis of dependencies among design tasks and optimization of the design process. The framework based on a lumped model description of mechanical systems enables concurrent and cooperative work among multidisciplinary designers at an early stage of the design process. In this paper, we also discuss the relationships between these techniques and the product development flow from product definition to detailed design. (author)

Classroom-Based Functional Analysis and Intervention for Disruptive and Off-Task Behaviors

Science.gov (United States)

Shumate, Emily D.; Wills, Howard P.

2010-01-01

Although there is a growing body of literature on the use of functional analysis in schools, there is a need for more demonstrations of this technology being used during the course of typical instruction. In this study, we conducted functional analyses of disruptive and off-task behavior in a reading classroom setting for 3 participants of typical…

Co-Constructional Task Analysis: Moving beyond Adult-Based Models to Assess Young Children's Task Performance

Science.gov (United States)

Lee, Scott Weng Fai

2013-01-01

The assessment of young children's thinking competence in task performances has typically followed the novice-to-expert regimen involving models of strategies that adults use when engaged in cognitive tasks such as problem-solving and decision-making. Socio-constructivists argue for a balanced pedagogical approach between the adult and child that…

Task analysis of human-in-the-loop tele-operated maintenance: What can be learned from JET?

International Nuclear Information System (INIS)

Boessenkool, H.; Thomas, J.; Heemskerk, C.J.M.; Baar, M.R. de; Steinbuch, M.; Abbink, D.A.

2014-01-01

Highlights: •Maintenance task execution at JET was analyzed to guide improvements for ITER. •A large variation in task duration was found for various operator experience levels. •Results indicate significant room for improvement for tele-operated performance. •Improvent of visual feedback and artificial guiding forces was considered promising. -- Abstract: Remote maintenance will determine the available uptime of future fusion plants such as ITER. Experience at predecessor JET showed that a human-in-the-loop tele-operated approach is crucial, although this approach entails drawbacks such as the unavoidable extensive operator training and relatively long execution times. These drawbacks are common knowledge, but little quantitative research is available to guide improvements (such as improved training methods, or active operator support systems). The aim of this paper is to identify the key areas for further improvement of tele-operated maintenance. This is achieved by a detailed task analysis based on recent maintenance at JET, using task logbooks and video data as well as interviews with experienced master–slave operators. The resulting task analysis shows the (sub)tasks that were most time-consuming and shows a large variance in time performance within operators, but also substantial differences between qualified operators with different levels of experience. The operator interviews indicate that intuitive (virtual) visual feedback and artificial (guiding) forces are promising directions for improvement. The results found in this study will be used for future research and development activities focusing on haptic guiding strategies, with the aim to further design and optimize RH maintenance systems for ITER and beyond

Analysis of operators' diagnosis tasks based on cognitive process

International Nuclear Information System (INIS)

Zhou Yong; Zhang Li

2012-01-01

Diagnosis tasks in nuclear power plants characterized as high-dynamic uncertainties are complex reasoning tasks. Diagnosis errors are the main causes for the error of commission. Firstly, based on mental model theory and perception/action cycle theory, a cognitive model for analyzing operators' diagnosis tasks is proposed. Then, the model is used to investigate a trip event which occurred at crystal river nuclear power plant. The application demonstrates typical cognitive bias and mistakes which operators may make when performing diagnosis tasks. They mainly include the strong confirmation tendency, difficulty to produce complete hypothesis sets, group mindset, non-systematic errors in hypothesis testing, and etc. (authors)

Effects of Task Complexity, Task Conditions, and Task Difficulty on the Grammatical Accuracy of EFL Learners in Written Discourse

Directory of Open Access Journals (Sweden)

Saeideh Ahangari

2012-11-01

Full Text Available Different methods of language teaching have tried to help EFL learners to develop good language skills based on their various perspectives. Research findings have underscored the effect of using task types in promoting language skills in terms of accuracy in written discourse. Therefore, this study set out to investigate whether there is an evidence of correct use of simple past tense (Accuracy based on Task Complexity (Task type :Here-and now & There-and-then,Task Conditions (Gender: Male & Female, and Task Difficulty (Proficiency: Lower-intermediate & Intermediate. Sixty Iranian English learners in a language institute participated in the study and were assigned to four groups of lower-intermediate male, lower-intermediate female, intermediate male and intermediate female. Initial homogeneity of the groups was verified using two general proficiency tests; KET for lower-intermediate and PET for intermediate. All groups in here-and-now task type were asked to write a story using simple past based on a picture strip while for there-and-then task type the participants were supposed to write about their last birthday. The results from paired samples t-test, independent samples t-test and two-way ANOVA analysis of the written data revealed significant differences in performing task types, at different proficiency levels and interaction between them. The findings have significant pedagogical implications for EFL learners to understand the relationship among Task Complexity,Task Conditions, Task Difficulty and L2 written production leading to various degrees of Accuracy.

Construction of mammographic examination process ontology using bottom-up hierarchical task analysis.

Science.gov (United States)

Yagahara, Ayako; Yokooka, Yuki; Jiang, Guoqian; Tsuji, Shintarou; Fukuda, Akihisa; Nishimoto, Naoki; Kurowarabi, Kunio; Ogasawara, Katsuhiko

2018-03-01

Describing complex mammography examination processes is important for improving the quality of mammograms. It is often difficult for experienced radiologic technologists to explain the process because their techniques depend on their experience and intuition. In our previous study, we analyzed the process using a new bottom-up hierarchical task analysis and identified key components of the process. Leveraging the results of the previous study, the purpose of this study was to construct a mammographic examination process ontology to formally describe the relationships between the process and image evaluation criteria to improve the quality of mammograms. First, we identified and created root classes: task, plan, and clinical image evaluation (CIE). Second, we described an "is-a" relation referring to the result of the previous study and the structure of the CIE. Third, the procedural steps in the ontology were described using the new properties: "isPerformedBefore," "isPerformedAfter," and "isPerformedAfterIfNecessary." Finally, the relationships between tasks and CIEs were described using the "isAffectedBy" property to represent the influence of the process on image quality. In total, there were 219 classes in the ontology. By introducing new properties related to the process flow, a sophisticated mammography examination process could be visualized. In relationships between tasks and CIEs, it became clear that the tasks affecting the evaluation criteria related to positioning were greater in number than those for image quality. We developed a mammographic examination process ontology that makes knowledge explicit for a comprehensive mammography process. Our research will support education and help promote knowledge sharing about mammography examination expertise.

Resting-State Seed-Based Analysis: An Alternative to Task-Based Language fMRI and Its Laterality Index.

Science.gov (United States)

Smitha, K A; Arun, K M; Rajesh, P G; Thomas, B; Kesavadas, C

2017-06-01

Language is a cardinal function that makes human unique. Preservation of language function poses a great challenge for surgeons during resection. The aim of the study was to assess the efficacy of resting-state fMRI in the lateralization of language function in healthy subjects to permit its further testing in patients who are unable to perform task-based fMRI. Eighteen healthy right-handed volunteers were prospectively evaluated with resting-state fMRI and task-based fMRI to assess language networks. The laterality indices of Broca and Wernicke areas were calculated by using task-based fMRI via a voxel-value approach. We adopted seed-based resting-state fMRI connectivity analysis together with parameters such as amplitude of low-frequency fluctuation and fractional amplitude of low-frequency fluctuation (fALFF). Resting-state fMRI connectivity maps for language networks were obtained from Broca and Wernicke areas in both hemispheres. We performed correlation analysis between the laterality index and the z scores of functional connectivity, amplitude of low-frequency fluctuation, and fALFF. Pearson correlation analysis between signals obtained from the z score of fALFF and the laterality index yielded a correlation coefficient of 0.849 ( P laterality index yielded an R 2 value of 0.721, indicating that 72.1% of the variance in the laterality index of task-based fMRI could be predicted from the fALFF of resting-state fMRI. The present study demonstrates that fALFF can be used as an alternative to task-based fMRI for assessing language laterality. There was a strong positive correlation between the fALFF of the Broca area of resting-state fMRI with the laterality index of task-based fMRI. Furthermore, we demonstrated the efficacy of fALFF for predicting the laterality of task-based fMRI. © 2017 by American Journal of Neuroradiology.

Job task analysis: lessons learned from application in course development

International Nuclear Information System (INIS)

Meredith, J.B.

1985-01-01

Those at Public Service Electric and Gas Company are committed to a systematic approach to training known as Instructional System Design. Our performance-based training emphasizes the ISD process to have trainees do or perform the task whenever and wherever it is possible for the jobs for which they are being trained. Included is a brief description of our process for conducting and validating job analyses. The major thrust of this paper is primarily on the lessons that we have learned in the design and development of training programs based upon job analysis results

Increased cognitive control after task conflict? Investigating the N-3 effect in task switching.

Science.gov (United States)

Schuch, Stefanie; Grange, James A

2018-05-25

Task inhibition is considered to facilitate switching to a new task and is assumed to decay slowly over time. Hence, more persisting inhibition needs to be overcome when returning to a task after one intermediary trial (ABA task sequence) than when returning after two or more intermediary trials (CBA task sequence). Schuch and Grange (J Exp Psychol Learn Mem Cogn 41:760-767, 2015) put forward the hypothesis that there is higher task conflict in ABA than CBA sequences, leading to increased cognitive control in the subsequent trial. They provided evidence that performance is better in trials following ABA than following CBA task sequences. Here, this effect of the previous task sequence ("N-3 effect") is further investigated by varying the cue-stimulus interval (CSI), allowing for short (100 ms) or long (900 ms) preparation time for the upcoming task. If increased cognitive control after ABA involves a better preparation for the upcoming task, the N-3 effect should be larger with long than short CSI. The results clearly show that this is not the case. In Experiment 1, the N-3 effect was smaller with long than short CSI; in Experiment 2, the N-3 effect was not affected by CSI. Diffusion model analysis confirmed previous results in the literature (regarding the effect of CSI and of the ABA-CBA difference); however, the N-3 effect was not unequivocally associated with any of the diffusion model parameters. In exploratory analysis, we also tested the alternative hypothesis that the N-3 effect involves more effective task shielding, which would be reflected in reduced congruency effects in trials following ABA, relative to trials following CBA; congruency effects did not differ between these conditions. Taken together, we can rule out two potential explanations of the N-3 effect: Neither is this effect due to enhanced task preparation, nor to more effective task shielding.

A comparative critical analysis of modern task-parallel runtimes.

Energy Technology Data Exchange (ETDEWEB)

Wheeler, Kyle Bruce; Stark, Dylan; Murphy, Richard C.

2012-12-01

The rise in node-level parallelism has increased interest in task-based parallel runtimes for a wide array of application areas. Applications have a wide variety of task spawning patterns which frequently change during the course of application execution, based on the algorithm or solver kernel in use. Task scheduling and load balance regimes, however, are often highly optimized for specific patterns. This paper uses four basic task spawning patterns to quantify the impact of specific scheduling policy decisions on execution time. We compare the behavior of six publicly available tasking runtimes: Intel Cilk, Intel Threading Building Blocks (TBB), Intel OpenMP, GCC OpenMP, Qthreads, and High Performance ParalleX (HPX). With the exception of Qthreads, the runtimes prove to have schedulers that are highly sensitive to application structure. No runtime is able to provide the best performance in all cases, and those that do provide the best performance in some cases, unfortunately, provide extremely poor performance when application structure does not match the schedulers assumptions.

Task-evoked brain functional magnetic susceptibility mapping by independent component analysis (χICA).

Science.gov (United States)

Chen, Zikuan; Calhoun, Vince D

2016-03-01

Conventionally, independent component analysis (ICA) is performed on an fMRI magnitude dataset to analyze brain functional mapping (AICA). By solving the inverse problem of fMRI, we can reconstruct the brain magnetic susceptibility (χ) functional states. Upon the reconstructed χ dataspace, we propose an ICA-based brain functional χ mapping method (χICA) to extract task-evoked brain functional map. A complex division algorithm is applied to a timeseries of fMRI phase images to extract temporal phase changes (relative to an OFF-state snapshot). A computed inverse MRI (CIMRI) model is used to reconstruct a 4D brain χ response dataset. χICA is implemented by applying a spatial InfoMax ICA algorithm to the reconstructed 4D χ dataspace. With finger-tapping experiments on a 7T system, the χICA-extracted χ-depicted functional map is similar to the SPM-inferred functional χ map by a spatial correlation of 0.67 ± 0.05. In comparison, the AICA-extracted magnitude-depicted map is correlated with the SPM magnitude map by 0.81 ± 0.05. The understanding of the inferiority of χICA to AICA for task-evoked functional map is an ongoing research topic. For task-evoked brain functional mapping, we compare the data-driven ICA method with the task-correlated SPM method. In particular, we compare χICA with AICA for extracting task-correlated timecourses and functional maps. χICA can extract a χ-depicted task-evoked brain functional map from a reconstructed χ dataspace without the knowledge about brain hemodynamic responses. The χICA-extracted brain functional χ map reveals a bidirectional BOLD response pattern that is unavailable (or different) from AICA. Copyright © 2016 Elsevier B.V. All rights reserved.

Multi-task linear programming discriminant analysis for the identification of progressive MCI individuals.

Science.gov (United States)

Yu, Guan; Liu, Yufeng; Thung, Kim-Han; Shen, Dinggang

2014-01-01

Accurately identifying mild cognitive impairment (MCI) individuals who will progress to Alzheimer's disease (AD) is very important for making early interventions. Many classification methods focus on integrating multiple imaging modalities such as magnetic resonance imaging (MRI) and fluorodeoxyglucose positron emission tomography (FDG-PET). However, the main challenge for MCI classification using multiple imaging modalities is the existence of a lot of missing data in many subjects. For example, in the Alzheimer's Disease Neuroimaging Initiative (ADNI) study, almost half of the subjects do not have PET images. In this paper, we propose a new and flexible binary classification method, namely Multi-task Linear Programming Discriminant (MLPD) analysis, for the incomplete multi-source feature learning. Specifically, we decompose the classification problem into different classification tasks, i.e., one for each combination of available data sources. To solve all different classification tasks jointly, our proposed MLPD method links them together by constraining them to achieve the similar estimated mean difference between the two classes (under classification) for those shared features. Compared with the state-of-the-art incomplete Multi-Source Feature (iMSF) learning method, instead of constraining different classification tasks to choose a common feature subset for those shared features, MLPD can flexibly and adaptively choose different feature subsets for different classification tasks. Furthermore, our proposed MLPD method can be efficiently implemented by linear programming. To validate our MLPD method, we perform experiments on the ADNI baseline dataset with the incomplete MRI and PET images from 167 progressive MCI (pMCI) subjects and 226 stable MCI (sMCI) subjects. We further compared our method with the iMSF method (using incomplete MRI and PET images) and also the single-task classification method (using only MRI or only subjects with both MRI and PET images

Multi-task linear programming discriminant analysis for the identification of progressive MCI individuals.

Directory of Open Access Journals (Sweden)

Guan Yu

Full Text Available Accurately identifying mild cognitive impairment (MCI individuals who will progress to Alzheimer's disease (AD is very important for making early interventions. Many classification methods focus on integrating multiple imaging modalities such as magnetic resonance imaging (MRI and fluorodeoxyglucose positron emission tomography (FDG-PET. However, the main challenge for MCI classification using multiple imaging modalities is the existence of a lot of missing data in many subjects. For example, in the Alzheimer's Disease Neuroimaging Initiative (ADNI study, almost half of the subjects do not have PET images. In this paper, we propose a new and flexible binary classification method, namely Multi-task Linear Programming Discriminant (MLPD analysis, for the incomplete multi-source feature learning. Specifically, we decompose the classification problem into different classification tasks, i.e., one for each combination of available data sources. To solve all different classification tasks jointly, our proposed MLPD method links them together by constraining them to achieve the similar estimated mean difference between the two classes (under classification for those shared features. Compared with the state-of-the-art incomplete Multi-Source Feature (iMSF learning method, instead of constraining different classification tasks to choose a common feature subset for those shared features, MLPD can flexibly and adaptively choose different feature subsets for different classification tasks. Furthermore, our proposed MLPD method can be efficiently implemented by linear programming. To validate our MLPD method, we perform experiments on the ADNI baseline dataset with the incomplete MRI and PET images from 167 progressive MCI (pMCI subjects and 226 stable MCI (sMCI subjects. We further compared our method with the iMSF method (using incomplete MRI and PET images and also the single-task classification method (using only MRI or only subjects with both MRI and

Analysis of Skeletal Muscle Metrics as Predictors of Functional Task Performance

Science.gov (United States)

Ryder, Jeffrey W.; Buxton, Roxanne E.; Redd, Elizabeth; Scott-Pandorf, Melissa; Hackney, Kyle J.; Fiedler, James; Ploutz-Snyder, Robert J.; Bloomberg, Jacob J.; Ploutz-Snyder, Lori L.

2010-01-01

PURPOSE: The ability to predict task performance using physiological performance metrics is vital to ensure that astronauts can execute their jobs safely and effectively. This investigation used a weighted suit to evaluate task performance at various ratios of strength, power, and endurance to body weight. METHODS: Twenty subjects completed muscle performance tests and functional tasks representative of those that would be required of astronauts during planetary exploration (see table for specific tests/tasks). Subjects performed functional tasks while wearing a weighted suit with additional loads ranging from 0-120% of initial body weight. Performance metrics were time to completion for all tasks except hatch opening, which consisted of total work. Task performance metrics were plotted against muscle metrics normalized to "body weight" (subject weight + external load; BW) for each trial. Fractional polynomial regression was used to model the relationship between muscle and task performance. CONCLUSION: LPMIF/BW is the best predictor of performance for predominantly lower-body tasks that are ambulatory and of short duration. LPMIF/BW is a very practical predictor of occupational task performance as it is quick and relatively safe to perform. Accordingly, bench press work best predicts hatch-opening work performance.

Overview of the ID, EPI and REL tasks of BioNLP Shared Task 2011

Directory of Open Access Journals (Sweden)

Pyysalo Sampo

2012-06-01

Full Text Available Abstract We present the preparation, resources, results and analysis of three tasks of the BioNLP Shared Task 2011: the main tasks on Infectious Diseases (ID and Epigenetics and Post-translational Modifications (EPI, and the supporting task on Entity Relations (REL. The two main tasks represent extensions of the event extraction model introduced in the BioNLP Shared Task 2009 (ST'09 to two new areas of biomedical scientific literature, each motivated by the needs of specific biocuration tasks. The ID task concerns the molecular mechanisms of infection, virulence and resistance, focusing in particular on the functions of a class of signaling systems that are ubiquitous in bacteria. The EPI task is dedicated to the extraction of statements regarding chemical modifications of DNA and proteins, with particular emphasis on changes relating to the epigenetic control of gene expression. By contrast to these two application-oriented main tasks, the REL task seeks to support extraction in general by separating challenges relating to part-of relations into a subproblem that can be addressed by independent systems. Seven groups participated in each of the two main tasks and four groups in the supporting task. The participating systems indicated advances in the capability of event extraction methods and demonstrated generalization in many aspects: from abstracts to full texts, from previously considered subdomains to new ones, and from the ST'09 extraction targets to other entities and events. The highest performance achieved in the supporting task REL, 58% F-score, is broadly comparable with levels reported for other relation extraction tasks. For the ID task, the highest-performing system achieved 56% F-score, comparable to the state-of-the-art performance at the established ST'09 task. In the EPI task, the best result was 53% F-score for the full set of extraction targets and 69% F-score for a reduced set of core extraction targets, approaching a level

Fuzzy logic approach to SWOT analysis for economics tasks and example of its computer realization

Directory of Open Access Journals (Sweden)

Vladimir CHERNOV

2016-07-01

Full Text Available The article discusses the widely used classic method of analysis, forecasting and decision-making in the various economic problems, called SWOT analysis. As known, it is a qualitative comparison of multicriteria degree of Strength, Weakness, Opportunity, Threat for different kinds of risks, forecasting the development in the markets, status and prospects of development of enterprises, regions and economic sectors, territorials etc. It can also be successfully applied to the evaluation and analysis of different project management tasks - investment, innovation, marketing, development, design and bring products to market and so on. However, in practical competitive market and economic conditions, there are various uncertainties, ambiguities, vagueness. Its making usage of SWOT analysis in the classical sense not enough reasonable and ineffective. In this case, the authors propose to use fuzzy logic approach and the theory of fuzzy sets for a more adequate representation and posttreatment assessments in the SWOT analysis. In particular, has been short showed the mathematical formulation of respective task and the main approaches to its solution. Also are given examples of suitable computer calculations in specialized software Fuzicalc for processing and operations with fuzzy input data. Finally, are presented considerations for interpretation of the results.

Analysis of Load-Carrying Capacity for Redundant Free-Floating Space Manipulators in Trajectory Tracking Task

Directory of Open Access Journals (Sweden)

Qingxuan Jia

2014-01-01

Full Text Available The aim of this paper is to analyze load-carrying capacity of redundant free-floating space manipulators (FFSM in trajectory tracking task. Combined with the analysis of influential factors in load-carrying process, evaluation of maximum load-carrying capacity (MLCC is described as multiconstrained nonlinear programming problem. An efficient algorithm based on repeated line search within discontinuous feasible region is presented to determine MLCC for a given trajectory of the end-effector and corresponding joint path. Then, considering the influence of MLCC caused by different initial configurations for the starting point of given trajectory, a kind of maximum payload initial configuration planning method is proposed by using PSO algorithm. Simulations are performed for a particular trajectory tracking task of the 7-DOF space manipulator, of which MLCC is evaluated quantitatively. By in-depth research of the simulation results, significant gap between the values of MLCC when using different initial configurations is analyzed, and the discontinuity of allowable load-carrying capacity is illustrated. The proposed analytical method can be taken as theoretical foundation of feasibility analysis, trajectory optimization, and optimal control of trajectory tracking task in on-orbit load-carrying operations.

Formative Research on the Simplifying Conditions Method (SCM) for Task Analysis and Sequencing.

Science.gov (United States)

Kim, YoungHwan; Reigluth, Charles M.

The Simplifying Conditions Method (SCM) is a set of guidelines for task analysis and sequencing of instructional content under the Elaboration Theory (ET). This article introduces the fundamentals of SCM and presents the findings from a formative research study on SCM. It was conducted in two distinct phases: design and instruction. In the first…

Blink activity and task difficulty.

Science.gov (United States)

Tanaka, Y; Yamaoka, K

1993-08-01

This study investigated the relationship between task difficulty and blink activity, which includes blink rate, blink amplitude, and blink duration. Two kinds of tasks established two levels of difficulty. In Exp. 1, a mental arithmetic task was used to examine the relationship. Analysis showed that blink rate for a difficult task was significantly higher than that for an easier one. In Exp. 2, a letter-search task (hiragana Japanese alphabet) was used while the other conditions were the same as those in Exp. 1; however, the results of this experiment were not influenced by the difficulty of the task. As results indicate that blink rate is related to not only difficulty but also the nature of the task, the nature of the task is probably dependent on a mechanism in information processing. The results for blink amplitude and blink duration showed no systematic change during either experiment.

Inferring biological tasks using Pareto analysis of high-dimensional data.

Science.gov (United States)

Hart, Yuval; Sheftel, Hila; Hausser, Jean; Szekely, Pablo; Ben-Moshe, Noa Bossel; Korem, Yael; Tendler, Avichai; Mayo, Avraham E; Alon, Uri

2015-03-01

We present the Pareto task inference method (ParTI; http://www.weizmann.ac.il/mcb/UriAlon/download/ParTI) for inferring biological tasks from high-dimensional biological data. Data are described as a polytope, and features maximally enriched closest to the vertices (or archetypes) allow identification of the tasks the vertices represent. We demonstrate that human breast tumors and mouse tissues are well described by tetrahedrons in gene expression space, with specific tumor types and biological functions enriched at each of the vertices, suggesting four key tasks.

COMMIT at SemEval-2017 Task 5: Ontology-based Method for Sentiment Analysis of Financial Headlines

NARCIS (Netherlands)

Schouten, Kim; Frasincar, Flavius; de Jong, F.M.G.

2017-01-01

This paper describes our submission to Task 5 of SemEval 2017, Fine-Grained Sentiment Analysis on Financial Microblogs and News, where we limit ourselves to performing sentiment analysis on news headlines only (track 2). The approach presented in this paper uses a Support Vector Machine to do the

Re: Madsen et al. "Unnecessary work tasks and mental health: a prospective analysis of Danish human service workers".

Science.gov (United States)

Durand-Moreau, Quentin; Loddé, Brice; Dewitte, Jean-Dominique

2015-03-01

Madsen et al (1) recently published a secondary analysis on data provided by the Project on Burnout, Motivation and Job Satisfaction (PUMA). The aim of their study, published in the Scandinavian Journal of Work, Environment & Health was to examine the associations between unnecessary work tasks and a decreased level of mental health. Though the topic was quite novel, reading this work proved disturbing and raised issues. Based on the results of this study, the authors stated that there is an association between unnecessary work tasks (assessed by a single question) and a decreased level of mental health, idem [assessed by the Mental Health Inventory (MHI-5)], in the specific population included in this PUMA survey. The authors point out a limitation of the study, namely that unnecessary work tasks were evaluated using one single question: "Do you sometimes have to do things in your job which appear to be unnecessary?". Semmer defines unnecessary work task as "tasks that should not be carried out at all because they do not make sense or because they could have been avoided, or could be carried out with less effort if things were organized more efficiently" (2). De facto, qualifying what an unnecessary task is requires stating or explaining whether the task makes sense. Making sense or not is not an objective notion. It is very difficult for either a manager or an employee to say if a task is necessary or not. Most important is that it makes sense from the worker's point of view. Making sense and being necessary are not synonyms. Some tasks do not make sense but are economically necessary (eg, when, as physicians, we are reporting our activity using ICD-10 on computers instead of being at patients' bedsides or reading this journal). Thus, there is a wide gap between Semmer's definition and the question used by the authors to evaluate his concept. A secondary analysis based on a single question is not adequate to evaluate unnecessary tasks. Nowadays, the general trend

BWR stability analysis: methodology of the stability analysis and results of PSI for the NEA/NCR benchmark task

International Nuclear Information System (INIS)

Hennig, D.; Nechvatal, L.

1996-09-01

The report describes the PSI stability analysis methodology and the validation of this methodology based on the international OECD/NEA BWR stability benchmark task. In the frame of this work, the stability properties of some operation points of the NPP Ringhals 1 have been analysed and compared with the experimental results. (author) figs., tabs., 45 refs

An Approach to Operational Analysis: Doctrinal Task Decomposition

Science.gov (United States)

2016-08-04

Once the unit is selected , CATS will output all of the doctrinal collective tasks associated with the unit. Currently, CATS outputs this information...Army unit are controlled data items, but for explanation purposes consider this simple example using a restaurant as the unit of interest. Table 1...shows an example Task Model for a restaurant using language and format similar to what CATS provides. Only 3 levels are shown in the example, but

Brain activations during bimodal dual tasks depend on the nature and combination of component tasks

Directory of Open Access Journals (Sweden)

Emma eSalo

2015-02-01

Full Text Available We used functional magnetic resonance imaging to investigate brain activations during nine different dual tasks in which the participants were required to simultaneously attend to concurrent streams of spoken syllables and written letters. They performed a phonological, spatial or simple (speaker-gender or font-shade discrimination task within each modality. We expected to find activations associated specifically with dual tasking especially in the frontal and parietal cortices. However, no brain areas showed systematic dual task enhancements common for all dual tasks. Further analysis revealed that dual tasks including component tasks that were according to Baddeley’s model modality atypical, that is, the auditory spatial task or the visual phonological task, were not associated with enhanced frontal activity. In contrast, for other dual tasks, activity specifically associated with dual tasking was found in the left or bilateral frontal cortices. Enhanced activation in parietal areas, however, appeared not to be specifically associated with dual tasking per se, but rather with intermodal attention switching. We also expected effects of dual tasking in left frontal supramodal phonological processing areas when both component tasks required phonological processing and in right parietal supramodal spatial processing areas when both tasks required spatial processing. However, no such effects were found during these dual tasks compared with their component tasks performed separately. Taken together, the current results indicate that activations during dual tasks depend in a complex manner on specific demands of component tasks.

The use of a cognitive task analysis-based multimedia program to teach surgical decision making in flexor tendon repair.

Science.gov (United States)

Luker, Kali R; Sullivan, Maura E; Peyre, Sarah E; Sherman, Randy; Grunwald, Tiffany

2008-01-01

The aim of this study was to compare the surgical knowledge of residents before and after receiving a cognitive task analysis-based multimedia teaching module. Ten plastic surgery residents were evaluated performing flexor tendon repair on 3 occasions. Traditional learning occurred between the first and second trial and served as the control. A teaching module was introduced as an intervention between the second and third trial using cognitive task analysis to illustrate decision-making skills. All residents showed improvement in their decision-making ability when performing flexor tendon repair after each surgical procedure. The group improved through traditional methods as well as exposure to our talk-aloud protocol (P > .01). After being trained using the cognitive task analysis curriculum the group displayed a statistically significant knowledge expansion (P multimedia surgical curriculum instruction achieved greater command of problem solving and are better equipped to make correct decisions in flexor tendon repair.

The Systems Approach to Functional Job Analysis. Task Analysis of the Physician's Assistant: Volume I--Task Analysis Methodology and Techniques.

Science.gov (United States)

Wake Forest Univ., Winston Salem, NC. Bowman Gray School of Medicine.

Utilizing a systematic sampling technique, the professional activities of small groups of pediatricians, family practitioners, surgeons, obstetricians, and internists were observed for 4 or 5 days by a medical student who checked a prearranged activity sheet every 30 seconds to: (1) identify those tasks and activities an assistant could be trained…

Brain-computer interface analysis of a dynamic visuo-motor task.

Science.gov (United States)

Logar, Vito; Belič, Aleš

2011-01-01

The area of brain-computer interfaces (BCIs) represents one of the more interesting fields in neurophysiological research, since it investigates the development of the machines that perform different transformations of the brain's "thoughts" to certain pre-defined actions. Experimental studies have reported some successful implementations of BCIs; however, much of the field still remains unexplored. According to some recent reports the phase coding of informational content is an important mechanism in the brain's function and cognition, and has the potential to explain various mechanisms of the brain's data transfer, but it has yet to be scrutinized in the context of brain-computer interface. Therefore, if the mechanism of phase coding is plausible, one should be able to extract the phase-coded content, carried by brain signals, using appropriate signal-processing methods. In our previous studies we have shown that by using a phase-demodulation-based signal-processing approach it is possible to decode some relevant information on the current motor action in the brain from electroencephalographic (EEG) data. In this paper the authors would like to present a continuation of their previous work on the brain-information-decoding analysis of visuo-motor (VM) tasks. The present study shows that EEG data measured during more complex, dynamic visuo-motor (dVM) tasks carries enough information about the currently performed motor action to be successfully extracted by using the appropriate signal-processing and identification methods. The aim of this paper is therefore to present a mathematical model, which by means of the EEG measurements as its inputs predicts the course of the wrist movements as applied by each subject during the task in simulated or real time (BCI analysis). However, several modifications to the existing methodology are needed to achieve optimal decoding results and a real-time, data-processing ability. The information extracted from the EEG could

Reliability of steam-turbine rotors. Task 1. Lifetime prediction analysis system. Final report

International Nuclear Information System (INIS)

Nair, P.K.; Pennick, H.G.; Peters, J.E.; Wells, C.H.

1982-12-01

Task 1 of RP 502, Reliability of Steam Turbine Rotors, resulted in the development of a computerized lifetime prediction analysis system (STRAP) for the automatic evaluation of rotor integrity based upon the results of a boresonic examination of near-bore defects. Concurrently an advanced boresonic examination system (TREES), designed to acquire data automatically for lifetime analysis, was developed and delivered to the maintenance shop of a major utility. This system and a semi-automated, state-of-the-art system (BUCS) were evaluated on two retired rotors as part of the Task 2 effort. A modified nonproprietary version of STRAP, called SAFER, is now available for rotor lifetime prediction analysis. STRAP and SAFER share a common fracture analysis postprocessor for rapid evaluation of either conventional boresonic amplitude data or TREES cell data. The final version of this postprocessor contains general stress intensity correlations for elliptical cracks in a radial stress gradient and provision for elastic-plastic instability of the ligament between an imbedded crack and the bore surface. Both linear elastic and ligament rupture models were developed for rapid analysis of linkup within three-dimensional clusters of defects. Bore stress-rupture criteria are included, but a creep-fatigue crack growth data base is not available. Physical and mechanical properties of air-melt 1CrMoV forgings are built into the program; however, only bounding values of fracture toughness versus temperature are available. Owing to the lack of data regarding the probability of flaw detection for the boresonic systems and of quantitative verification of the flaw linkup analysis, automatic evlauation of boresonic results is not recommended, and the lifetime prediction system is currently restricted to conservative, deterministic analysis of specified flaw geometries

Job task and functional analysis of the Division of Reactor Projects, office of Nuclear Reactor Regulation. Final report

Energy Technology Data Exchange (ETDEWEB)

Morzinski, J.A.; Gilmore, W.; Hahn, H.A.

1998-07-10

A job task and functional analysis was recently completed for the positions that make up the regional Divisions of Reactor Projects. Among the conclusions of that analysis was a recommendation to clarify roles and responsibilities among site, regional, and headquarters personnel. As that analysis did not cover headquarters personnel, a similar analysis was undertaken of three headquarters positions within the Division of Reactor Projects: Licensing Assistants, Project Managers, and Project Directors. The goals of this analysis were to systematically evaluate the tasks performed by these headquarters personnel to determine job training requirements, to account for variations due to division/regional assignment or differences in several experience categories, and to determine how, and by which positions, certain functions are best performed. The results of this analysis include recommendations for training and for job design. Data to support this analysis was collected by a survey instrument and through several sets of focus group meetings with representatives from each position.

Multifamily Energy Auditor Job/Task Analysis and Report: September 2013

Energy Technology Data Exchange (ETDEWEB)

Owens, C. M.

2013-09-01

The development of job/task analyses (JTAs) is one of three components of the Guidelines for Home Energy Professionals project and will allow industry to develop training resources, quality assurance protocols, accredited training programs, and professional certifications. The Multifamily Energy Auditor JTA identifies and catalogs all of the tasks performed by multifamily energy auditors, as well as the knowledge, skills, and abilities (KSAs) needed to perform the identified tasks.

Multifamily Building Operator Job/Task Analysis and Report: September 2013

Energy Technology Data Exchange (ETDEWEB)

Owens, C. M.

2013-09-01

The development of job/task analyses (JTAs) is one of three components of the Guidelines for Home Energy Professionals project and will allow industry to develop training resources, quality assurance protocols, accredited training programs, and professional certifications. The Multifamily Building Operator JTA identifies and catalogs all of the tasks performed by multifamily building operators, as well as the knowledge, skills, and abilities (KSAs) needed to perform the identified tasks.

Thermal-Hydraulic Analysis Tasks for ANAV NPPs in Support of Plant Operation and Control

Directory of Open Access Journals (Sweden)

L. Batet

2007-11-01

Full Text Available Thermal-hydraulic analysis tasks aimed at supporting plant operation and control of nuclear power plants are an important issue for the Asociación Nuclear Ascó-Vandellòs (ANAV. ANAV is the consortium that runs the Ascó power plants (2 units and the Vandellòs-II power plant. The reactors are Westinghouse-design, 3-loop PWRs with an approximate electrical power of 1000 MW. The Technical University of Catalonia (UPC thermal-hydraulic analysis team has jointly worked together with ANAV engineers at different levels in the analysis and improvement of these reactors. This article is an illustration of the usefulness of computational analysis for operational support. The contents presented were operational between 1985 and 2001 and subsequently changed slightly following various organizational adjustments. The paper has two different parts. In the first part, it describes the specific aspects of thermal-hydraulic analysis tasks related to operation and control and, in the second part, it briefly presents the results of three examples of analyses that were performed. All the presented examples are related to actual situations in which the scenarios were studied by analysts using thermal-hydraulic codes and prepared nodalizations. The paper also includes a qualitative evaluation of the benefits obtained by ANAV through thermal-hydraulic analyses aimed at supporting operation and plant control.

Development of flight experiment task requirements. Volume 2: Technical Report. Part 2: Appendix H: Tasks-skills data series

Science.gov (United States)

Hatterick, G. R.

1972-01-01

The data sheets presented contain the results of the task analysis portion of the study to identify skill requirements of space shuttle crew personnel. A comprehensive data base is provided of crew functions, operating environments, task dependencies, and task-skills applicable to a representative cross section of earth orbital research experiments.

What Makes a Mathematical Task Interesting?

Science.gov (United States)

Nyman, Rimma

2016-01-01

The study addresses the question of what makes a mathematical task interesting to the 9th year students. Semi-structured interviews were carried out with 15 students of purposive selection of the 9th year. The students were asked to recall a task they found interesting and engaging during the past three years. An analysis of the tasks was made…

Knee Arthroscopy Simulation: A Randomized Controlled Trial Evaluating the Effectiveness of the Imperial Knee Arthroscopy Cognitive Task Analysis (IKACTA) Tool.

Science.gov (United States)

Bhattacharyya, Rahul; Davidson, Donald J; Sugand, Kapil; Bartlett, Matthew J; Bhattacharya, Rajarshi; Gupte, Chinmay M

2017-10-04

Virtual-reality and cadaveric simulations are expensive and not readily accessible. Innovative and accessible training adjuncts are required to help to meet training needs. Cognitive task analysis has been used extensively to train pilots and in other surgical specialties. However, the use of cognitive task analyses within orthopaedics is in its infancy. The purpose of this study was to evaluate the effectiveness of a novel cognitive task analysis tool to train novice surgeons in diagnostic knee arthroscopy in high-fidelity, phantom-limb simulation. Three expert knee surgeons were interviewed independently to generate a list of technical steps, decision points, and errors for diagnostic knee arthroscopy. A modified Delphi technique was used to generate the final cognitive task analysis. A video and a voiceover were recorded for each phase of this procedure. These were combined to produce the Imperial Knee Arthroscopy Cognitive Task Analysis (IKACTA) tool that utilizes written and audiovisual stimuli to describe each phase of a diagnostic knee arthroscopy. In this double-blinded, randomized controlled trial, a power calculation was performed prior to recruitment. Sixteen novice orthopaedic trainees who performed ≤10 diagnostic knee arthroscopies were randomized into 2 equal groups. The intervention group (IKACTA group) was given the IKACTA tool and the control group had no additional learning material. They were assessed objectively (validated Arthroscopic Surgical Skill Evaluation Tool [ASSET] global rating scale) on a high-fidelity, phantom-knee simulator. All participants, using the Likert rating scale, subjectively rated the tool. The mean ASSET score (and standard deviation) was 19.5 ± 3.7 points in the IKACTA group and 10.6 ± 2.3 points in the control group, resulting in an improvement of 8.9 points (95% confidence interval, 7.6 to 10.1 points; p = 0.002); the score was determined as 51.3% (19.5 of 38) for the IKACTA group, 27.9% (10.6 of 38) for the

An analysis of the application of AI to the development of intelligent aids for flight crew tasks

Science.gov (United States)

Baron, S.; Feehrer, C.

1985-01-01

This report presents the results of a study aimed at developing a basis for applying artificial intelligence to the flight deck environment of commercial transport aircraft. In particular, the study was comprised of four tasks: (1) analysis of flight crew tasks, (2) survey of the state-of-the-art of relevant artificial intelligence areas, (3) identification of human factors issues relevant to intelligent cockpit aids, and (4) identification of artificial intelligence areas requiring further research.

Using task analysis to generate evidence for strengthening midwifery education, practice, and regulation in Ethiopia

NARCIS (Netherlands)

Yigzaw, Tegbar; Carr, Catherine; Stekelenburg, Jelle; van Roosmalen, Jos; Gibson, Hannah; Gelagay, Mintwab; Admassu, Azeb

2016-01-01

PURPOSE: Realizing aspirations for meeting the global reproductive, maternal, newborn, and child health goals depends not only on increasing the numbers but also on improving the capability of midwifery workforce. We conducted a task analysis study to identify the needs for strengthening the

The Factor Structure of Some Piagetian Tasks

Science.gov (United States)

Lawson, Anton E.; Nordland, Floyd H.

1976-01-01

Investigated was the hypothesis that conservation tasks are unifactor by administering eight different conservation tasks to 96 seventh-grade science students and performing a principal component analysis on the data. Results indicated that conservation tasks may measure up to three different components of cognitive thought. (SL)

Use of task analysis in control room evaluations

International Nuclear Information System (INIS)

Ross, K.C.

1981-01-01

Responding to recently formulated regulatory requirements, the BWR Owners' Group, working in conjunction with General Electric, has formulated a method for performing human factors design reviews of nuclear power plant control rooms. This process incorporates task analyses to analyze operational aspects of panel layout and design. Correlation of operator functions defined by emergency procedures against required controls and displays has proven successful in identifying instrumentation required in the control room to adequately respond to transient conditions, and in evaluating the effectiveness of panel design and physical arrangement. Extensions of the analysis have provided information on operator response paths, frequency of use of instruments, and control room layout. The techniques used were based on a need to identify primary controls and indications required by the operator in performing each step of the applicable procedure. The relative locations of these instruments were then analyzed for information on the adequacy of the control room design for those conditions

Effects of experimental muscle pain on force variability during task-related and three directional isometric force task

DEFF Research Database (Denmark)

Mista, Christian Ariel; Graven-Nielsen, Thomas

2013-01-01

was measured using sample entropy (SEn). Three-way repeated measures ANOVA with factors level of contraction, pain/control, and time were performed for the CV, the CoP, and the SEn of each component of the force. In the tangential forces, no significant effects were found for the 3D matching tasks. The ANOVA.......05). In the task-related force, no significant effects were found for the CV during the three-dimensional task or for the task-related task. Finally, the ANOVA analysis of sample entropy showed a significant interaction between pain/control and time (P

Inclusion of task dependence in human reliability analysis

International Nuclear Information System (INIS)

Su, Xiaoyan; Mahadevan, Sankaran; Xu, Peida; Deng, Yong

2014-01-01

Dependence assessment among human errors in human reliability analysis (HRA) is an important issue, which includes the evaluation of the dependence among human tasks and the effect of the dependence on the final human error probability (HEP). This paper represents a computational model to handle dependence in human reliability analysis. The aim of the study is to automatically provide conclusions on the overall degree of dependence and calculate the conditional human error probability (CHEP) once the judgments of the input factors are given. The dependence influencing factors are first identified by the experts and the priorities of these factors are also taken into consideration. Anchors and qualitative labels are provided as guidance for the HRA analyst's judgment of the input factors. The overall degree of dependence between human failure events is calculated based on the input values and the weights of the input factors. Finally, the CHEP is obtained according to a computing formula derived from the technique for human error rate prediction (THERP) method. The proposed method is able to quantify the subjective judgment from the experts and improve the transparency in the HEP evaluation process. Two examples are illustrated to show the effectiveness and the flexibility of the proposed method. - Highlights: • We propose a computational model to handle dependence in human reliability analysis. • The priorities of the dependence influencing factors are taken into consideration. • The overall dependence degree is determined by input judgments and the weights of factors. • The CHEP is obtained according to a computing formula derived from THERP

Do Tasks Make a Difference? Accounting for Heterogeneity of Performance of Children with Reading Difficulties on Tasks of Executive Function: Findings from a Meta-Analysis

Science.gov (United States)

Booth, Josephine N.; Boyle, James M. E.; Kelly, Steve W.

2010-01-01

Research studies have implicated executive functions in reading difficulties (RD). But while some studies have found children with RD to be impaired on tasks of executive function other studies report unimpaired performance. A meta-analysis was carried out to determine whether these discrepant findings can be accounted for by differences in the…

Utilizing job/task analysis to establish content validity in the design of training programs

Energy Technology Data Exchange (ETDEWEB)

Nay, W.E.

1988-01-01

The decade of the 1980's has been a turbulent time for the Department of Energy. With concern mounting about the terrorist threat, a wave of congressional inquiries and internal inspections crossed the nation and engulfed many of the nuclear laboratories and facilities operated by DOE contractors. A typical finding was the need to improve, and increase, the training of the protective force. The immediate reaction resulted in a wide variety of responses, with most contractors feeling safer with too much, rather than not enough training. As soon as the initial pressures to upgrade subsided, a task force was established to evaluate the overall training needs. Representatives from the contractor facilities worked together to conduct a job analysis of the protective force. A generic task inventory was established, and validated at the different sites. This list has been invaluable for determining the tasks, conditions, and standards needed to develop well stated learning objectives. The enhanced training programs are being refined to ensure job content validity based on the data collected.

Cognitive Modeling and Task Analysis: Basic Processes and Individual Differences

National Research Council Canada - National Science Library

Ackerman, Phillip

1999-01-01

... in a complex-skill environment. The subset of task conditions selected were those that involve basic processes of working memory, task monitoring, and differential loads on spatial reasoning and speed of perceiving...

On the importance of Task 1 and error performance measures in PRP dual-task studies

Science.gov (United States)

Strobach, Tilo; Schütz, Anja; Schubert, Torsten

2015-01-01

The psychological refractory period (PRP) paradigm is a dominant research tool in the literature on dual-task performance. In this paradigm a first and second component task (i.e., Task 1 and Task 2) are presented with variable stimulus onset asynchronies (SOAs) and priority to perform Task 1. The main indicator of dual-task impairment in PRP situations is an increasing Task 2-RT with decreasing SOAs. This impairment is typically explained with some task components being processed strictly sequentially in the context of the prominent central bottleneck theory. This assumption could implicitly suggest that processes of Task 1 are unaffected by Task 2 and bottleneck processing, i.e., decreasing SOAs do not increase reaction times (RTs) and error rates of the first task. The aim of the present review is to assess whether PRP dual-task studies included both RT and error data presentations and statistical analyses and whether studies including both data types (i.e., RTs and error rates) show data consistent with this assumption (i.e., decreasing SOAs and unaffected RTs and/or error rates in Task 1). This review demonstrates that, in contrast to RT presentations and analyses, error data is underrepresented in a substantial number of studies. Furthermore, a substantial number of studies with RT and error data showed a statistically significant impairment of Task 1 performance with decreasing SOA. Thus, these studies produced data that is not primarily consistent with the strong assumption that processes of Task 1 are unaffected by Task 2 and bottleneck processing in the context of PRP dual-task situations; this calls for a more careful report and analysis of Task 1 performance in PRP studies and for a more careful consideration of theories proposing additions to the bottleneck assumption, which are sufficiently general to explain Task 1 and Task 2 effects. PMID:25904890

On the importance of Task 1 and error performance measures in PRP dual-task studies.

Science.gov (United States)

Strobach, Tilo; Schütz, Anja; Schubert, Torsten

2015-01-01

The psychological refractory period (PRP) paradigm is a dominant research tool in the literature on dual-task performance. In this paradigm a first and second component task (i.e., Task 1 and Task 2) are presented with variable stimulus onset asynchronies (SOAs) and priority to perform Task 1. The main indicator of dual-task impairment in PRP situations is an increasing Task 2-RT with decreasing SOAs. This impairment is typically explained with some task components being processed strictly sequentially in the context of the prominent central bottleneck theory. This assumption could implicitly suggest that processes of Task 1 are unaffected by Task 2 and bottleneck processing, i.e., decreasing SOAs do not increase reaction times (RTs) and error rates of the first task. The aim of the present review is to assess whether PRP dual-task studies included both RT and error data presentations and statistical analyses and whether studies including both data types (i.e., RTs and error rates) show data consistent with this assumption (i.e., decreasing SOAs and unaffected RTs and/or error rates in Task 1). This review demonstrates that, in contrast to RT presentations and analyses, error data is underrepresented in a substantial number of studies. Furthermore, a substantial number of studies with RT and error data showed a statistically significant impairment of Task 1 performance with decreasing SOA. Thus, these studies produced data that is not primarily consistent with the strong assumption that processes of Task 1 are unaffected by Task 2 and bottleneck processing in the context of PRP dual-task situations; this calls for a more careful report and analysis of Task 1 performance in PRP studies and for a more careful consideration of theories proposing additions to the bottleneck assumption, which are sufficiently general to explain Task 1 and Task 2 effects.

The application of subjective job task analysis techniques in physically demanding occupations: evidence for the presence of self-serving bias.

Science.gov (United States)

Lee-Bates, Benjamin; Billing, Daniel C; Caputi, Peter; Carstairs, Greg L; Linnane, Denise; Middleton, Kane

2017-09-01

The aim of this study was to determine if perceptions of physically demanding job tasks are biased by employee demographics and employment profile characteristics including: age, sex, experience, length of tenure, rank and if they completed or supervised a task. Surveys were administered to 427 Royal Australian Navy personnel who characterised 33 tasks in terms of physical effort, importance, frequency, duration and vertical/horizontal distance travelled. Results showed no evidence of bias resulting from participant characteristics, however participants who were actively involved in both task participation and supervision rated these tasks as more important than those involved only in the supervision of that task. This may indicate self-serving bias in which participants that are more actively involved in a task had an inflated perception of that task's importance. These results have important implications for the conduct of job task analyses, especially the use of subjective methodologies in the development of scientifically defensible physical employment standards. Practitioner Summary: To examine the presence of systematic bias in subjective job task analysis methodologies, a survey was conducted on a sample of Royal Australian Navy personnel. The relationship between job task descriptions and participant's demographic and job profile characteristics revealed the presence of self-serving bias affecting perceptions of task importance.

Differential recruitment of theory of mind brain network across three tasks: An independent component analysis.

Science.gov (United States)

Thye, Melissa D; Ammons, Carla J; Murdaugh, Donna L; Kana, Rajesh K

2018-07-16

Social neuroscience research has focused on an identified network of brain regions primarily associated with processing Theory of Mind (ToM). However, ToM is a broad cognitive process, which encompasses several sub-processes, such as mental state detection and intentional attribution, and the connectivity of brain regions underlying the broader ToM network in response to paradigms assessing these sub-processes requires further characterization. Standard fMRI analyses which focus only on brain activity cannot capture information about ToM processing at a network level. An alternative method, independent component analysis (ICA), is a data-driven technique used to isolate intrinsic connectivity networks, and this approach provides insight into network-level regional recruitment. In this fMRI study, three complementary, but distinct ToM tasks assessing mental state detection (e.g. RMIE: Reading the Mind in the Eyes; RMIV: Reading the Mind in the Voice) and intentional attribution (Causality task) were each analyzed using ICA in order to separately characterize the recruitment and functional connectivity of core nodes in the ToM network in response to the sub-processes of ToM. Based on visual comparison of the derived networks for each task, the spatiotemporal network patterns were similar between the RMIE and RMIV tasks, which elicited mentalizing about the mental states of others, and these networks differed from the network derived for the Causality task, which elicited mentalizing about goal-directed actions. The medial prefrontal cortex, precuneus, and right inferior frontal gyrus were seen in the components with the highest correlation with the task condition for each of the tasks highlighting the role of these regions in general ToM processing. Using a data-driven approach, the current study captured the differences in task-related brain response to ToM in three distinct ToM paradigms. The findings of this study further elucidate the neural mechanisms associated

Exploring the Cosmic Frontier, Task A - Direct Detection of Dark Matter, Task B - Experimental Particle Astrophysics

International Nuclear Information System (INIS)

Matthews, John A.J.; Gold, Michael S.

2016-01-01

This report summarizes the work of Task A and B for the period 2013-2016. For Task A the work is for direct detection of dark matter with the single-phase liquid argon experiment Mini-CLEAN. For Task B the work is for the search for new physics in the analysis of fluorescence events with the Auger experiment and for the search for the indirect detection of dark matter with the HAWC experiment.

Exploring the Cosmic Frontier, Task A - Direct Detection of Dark Matter, Task B - Experimental Particle Astrophysics

Energy Technology Data Exchange (ETDEWEB)

Matthews, John A.J. [Univ. of New Mexico, Albuquerque, NM (United States); Gold, Michael S. [Univ. of New Mexico, Albuquerque, NM (United States)

2016-08-11

This report summarizes the work of Task A and B for the period 2013-2016. For Task A the work is for direct detection of dark matter with the single-phase liquid argon experiment Mini-CLEAN. For Task B the work is for the search for new physics in the analysis of fluorescence events with the Auger experiment and for the search for the indirect detection of dark matter with the HAWC experiment.

Involvement of the anterior cingulate cortex in time-based prospective memory task monitoring: An EEG analysis of brain sources using Independent Component and Measure Projection Analysis.

Directory of Open Access Journals (Sweden)

Gabriela Cruz

Full Text Available Time-based prospective memory (PM, remembering to do something at a particular moment in the future, is considered to depend upon self-initiated strategic monitoring, involving a retrieval mode (sustained maintenance of the intention plus target checking (intermittent time checks. The present experiment was designed to explore what brain regions and brain activity are associated with these components of strategic monitoring in time-based PM tasks.24 participants were asked to reset a clock every four minutes, while performing a foreground ongoing word categorisation task. EEG activity was recorded and data were decomposed into source-resolved activity using Independent Component Analysis. Common brain regions across participants, associated with retrieval mode and target checking, were found using Measure Projection Analysis.Participants decreased their performance on the ongoing task when concurrently performed with the time-based PM task, reflecting an active retrieval mode that relied on withdrawal of limited resources from the ongoing task. Brain activity, with its source in or near the anterior cingulate cortex (ACC, showed changes associated with an active retrieval mode including greater negative ERP deflections, decreased theta synchronization, and increased alpha suppression for events locked to the ongoing task while maintaining a time-based intention. Activity in the ACC was also associated with time-checks and found consistently across participants; however, we did not find an association with time perception processing per se.The involvement of the ACC in both aspects of time-based PM monitoring may be related to different functions that have been attributed to it: strategic control of attention during the retrieval mode (distributing attentional resources between the ongoing task and the time-based task and anticipatory/decision making processing associated with clock-checks.

Hawaii Energy Strategy Project 2: Fossil Energy Review. Task IV. Scenario development and analysis

Energy Technology Data Exchange (ETDEWEB)

Yamaguchi, N.D.; Breazeale, K. [ed.

1993-12-01

The Hawaii Energy Strategy (HES) Program is a seven-project effort led by the State of Hawaii Department of Business, Economic Development & Tourism (DBEDT) to investigate a wide spectrum of Hawaii energy issues. The East-West Center`s Program on Resources: Energy and Minerals, has been assigned HES Project 2, Fossil Energy Review, which focuses on fossil energy use in Hawaii and the greater regional and global markets. HES Project 2 has four parts: Task I (World and Regional Fossil Energy Dynamics) covers petroleum, natural gas, and coal in global and regional contexts, along with a discussion of energy and the environment. Task II (Fossil Energy in Hawaii) focuses more closely on fossil energy use in Hawaii: current utilization and trends, the structure of imports, possible future sources of supply, fuel substitutability, and energy security. Task III`s emphasis is Greenfield Options; that is, fossil energy sources not yet used in Hawaii. This task is divided into two sections: first, an in-depth {open_quotes}Assessment of Coal Technology Options and Implications for the State of Hawaii,{close_quotes} along with a spreadsheet analysis model, which was subcontracted to the Environmental Assessment and Information Sciences Division of Argonne National Laboratory; and second, a chapter on liquefied natural gas (LNG) in the Asia-Pacific market and the issues surrounding possible introduction of LNG into the Hawaii market.

On the importance of Task 1 and error performance measures in PRP dual-task studies

Directory of Open Access Journals (Sweden)

Tilo eStrobach

2015-04-01

Full Text Available The Psychological Refractory Period (PRP paradigm is a dominant research tool in the literature on dual-task performance. In this paradigm a first and second component task (i.e., Task 1 and 2 are presented with variable stimulus onset asynchronies (SOAs and priority to perform Task 1. The main indicator of dual-task impairment in PRP situations is an increasing Task 2-RT with decreasing SOAs. This impairment is typically explained with some task components being processed strictly sequentially in the context of the prominent central bottleneck theory. This assumption could implicitly suggest that processes of Task 1 are unaffected by Task 2 and bottleneck processing, i.e. decreasing SOAs do not increase RTs and error rates of the first task. The aim of the present review is to assess whether PRP dual-task studies included both RT and error data presentations and statistical analyses and whether studies including both data types (i.e., RTs and error rates show data consistent with this assumption (i.e., decreasing SOAs and unaffected RTs and/ or error rates in Task 1. This review demonstrates that, in contrast to RT presentations and analyses, error data is underrepresented in a substantial number of studies. Furthermore, a substantial number of studies with RT and error data showed a statistically significant impairment of Task 1 performance with decreasing SOA. Thus, these studies produced data that is not primarily consistent with the strong assumption that processes of Task 1 are unaffected by Task 2 and bottleneck processing in the context of PRP dual-task situations; this calls for a more careful report and analysis of Task 1 performance in PRP studies and for a more careful consideration of theories proposing additions to the bottleneck assumption, which are sufficiently general to explain Task 1 and Task 2 effects.

Analysis of Time n Frequency EEG Feature Extraction Methods for Mental Task Classification

Directory of Open Access Journals (Sweden)

Caglar Uyulan

2017-01-01

Full Text Available Many endogenous and external components may affect the physiological, mental and behavioral states in humans. Monitoring tools are required to evaluate biomarkers, identify biological events, and predict their outcomes. Being one of the valuable indicators, brain biomarkers derived from temporal or spectral electroencephalography (EEG signals processing, allow for the classification of mental disorders and mental tasks. An EEG signal has a nonstationary nature and individual frequency feature, hence it can be concluded that each subject has peculiar timing and data to extract unique features. In order to classify data, which are collected by performing four mental task (reciting the alphabet backwards, imagination of rotation of a cube, imagination of right hand movements (open/close and performing mathematical operations, discriminative features were extracted using four competitive time-frequency techniques; Wavelet Packet Decomposition (WPD, Morlet Wavelet Transform (MWT, Short Time Fourier Transform (STFT and Wavelet Filter Bank (WFB, respectively. The extracted features using both time and frequency domain information were then reduced using a principal component analysis for subset reduction. Finally, the reduced subsets were fed into a multi-layer perceptron neural network (MP-NN trained with back propagation (BP algorithm to generate a predictive model. This study mainly focuses on comparing the relative performance of time-frequency feature extraction methods that are used to classify mental tasks. The real-time (RT conducted experimental results underlined that the WPD feature extraction method outperforms with 92% classification accuracy compared to three other aforementioned methods for four different mental tasks.

Resting-state brain activity in the motor cortex reflects task-induced activity: A multi-voxel pattern analysis.

Science.gov (United States)

Kusano, Toshiki; Kurashige, Hiroki; Nambu, Isao; Moriguchi, Yoshiya; Hanakawa, Takashi; Wada, Yasuhiro; Osu, Rieko

2015-08-01

It has been suggested that resting-state brain activity reflects task-induced brain activity patterns. In this study, we examined whether neural representations of specific movements can be observed in the resting-state brain activity patterns of motor areas. First, we defined two regions of interest (ROIs) to examine brain activity associated with two different behavioral tasks. Using multi-voxel pattern analysis with regularized logistic regression, we designed a decoder to detect voxel-level neural representations corresponding to the tasks in each ROI. Next, we applied the decoder to resting-state brain activity. We found that the decoder discriminated resting-state neural activity with accuracy comparable to that associated with task-induced neural activity. The distribution of learned weighted parameters for each ROI was similar for resting-state and task-induced activities. Large weighted parameters were mainly located on conjunctive areas. Moreover, the accuracy of detection was higher than that for a decoder whose weights were randomly shuffled, indicating that the resting-state brain activity includes multi-voxel patterns similar to the neural representation for the tasks. Therefore, these results suggest that the neural representation of resting-state brain activity is more finely organized and more complex than conventionally considered.

Cognitive and collaborative demands of freight conductor activities: results and implications of a cognitive task analysis

Science.gov (United States)

2012-07-31

This report presents the results of a cognitive task analysis (CTA) that examined the cognitive and collaborative demands placed on conductors, as well as the knowledge and skills that experienced conductors have developed that enable them to operate...

Single-task and dual-task tandem gait test performance after concussion.

Science.gov (United States)

Howell, David R; Osternig, Louis R; Chou, Li-Shan

2017-07-01

To compare single-task and dual-task tandem gait test performance between athletes after concussion with controls on observer-timed, spatio-temporal, and center-of-mass (COM) balance control measurements. Ten participants (19.0±5.5years) were prospectively identified and completed a tandem gait test protocol within 72h of concussion and again 1 week, 2 weeks, 1 month, and 2 months post-injury. Seven uninjured controls (20.0±4.5years) completed the same protocol in similar time increments. Tandem gait test trials were performed with (dual-task) and without (single-task) concurrently performing a cognitive test as whole-body motion analysis was performed. Outcome variables included test completion time, average tandem gait velocity, cadence, and whole-body COM frontal plane displacement. Concussion participants took significantly longer to complete the dual-task tandem gait test than controls throughout the first 2 weeks post-injury (mean time=16.4 [95% CI: 13.4-19.4] vs. 10.1 [95% CI: 6.4-13.7] seconds; p=0.03). Single-task tandem gait times were significantly lower 72h post-injury (p=0.04). Dual-task cadence was significantly lower for concussion participants than controls (89.5 [95% CI: 68.6-110.4] vs. 127.0 [95% CI: 97.4-156.6] steps/minute; p=0.04). Moderately-high to high correlations between tandem gait test time and whole-body COM medial-lateral displacement were detected at each time point during dual-task gait (r s =0.70-0.93; p=0.03-0.001). Adding a cognitive task during the tandem gait test resulted in longer detectable deficits post-concussion compared to the traditional single-task tandem gait test. As a clinical tool to assess dynamic motor function, tandem gait may assist with return to sport decisions after concussion. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Form-based Approaches vs. Task-Based Approaches

Directory of Open Access Journals (Sweden)

Zahra Talebi

2015-07-01

Full Text Available This study aimed at investigating whether task-based approaches bear any superiority to that of more traditional ones evident in presentation-practice- and production phase .to fulfill the purpose of the study, the participants within the age range of 11-19, took part in the study. Following a pretest, treatment, and a posttest, the obtained data was analyzed using analysis of covariance (ANCOVA to examine the effects of the variables. The results of the analysis showed that participants in the PPP group did significantly better in the grammar recognition of the posttest than that of the task group. However, their counterparts in the task group gained better scores in the writing section of the test .this research study provided evidence in support of task proponents' claim in the merit of task-based activity in raising learners' implicit knowledge claiming to play the primary role in spontaneous speech.

Job/task analysis for I ampersand C [Instrumentation and Controls] instrument technicians at the High Flux Isotope Reactor

International Nuclear Information System (INIS)

Duke, L.L.

1989-09-01

To comply with Department of Energy Order 5480.XX (Draft), a job/task analysis was initiated by the Maintenance Management Department at Oak Ridge National Laboratory (ORNL). The analysis was applicable to instrument technicians working at the ORNL High Flux Isotope Reactor (HFIR). This document presents the procedures and results of that analysis. 2 refs., 2 figs

Task planning systems with natural language interface

International Nuclear Information System (INIS)

Kambayashi, Shaw; Uenaka, Junji

1989-12-01

In this report, a natural language analyzer and two different task planning systems are described. In 1988, we have introduced a Japanese language analyzer named CS-PARSER for the input interface of the task planning system in the Human Acts Simulation Program (HASP). For the purpose of a high speed analysis, we have modified a dictionary system of the CS-PARSER by using C language description. It is found that the new dictionary system is very useful for a high speed analysis and an efficient maintenance of the dictionary. For the study of the task planning problem, we have modified a story generating system named Micro TALE-SPIN to generate a story written in Japanese sentences. We have also constructed a planning system with natural language interface by using the CS-PARSER. Task planning processes and related knowledge bases of these systems are explained. A concept design for a new task planning system will be also discussed from evaluations of above mentioned systems. (author)

The human factors and job task analysis in nuclear power plant operation

International Nuclear Information System (INIS)

Stefanescu, Petre; Mihailescu, Nicolae; Dragusin, Octavian

1999-01-01

After a long period of time, during the development of the NPP technology, where the plant hardware has been considered to be the main factor for a safe, reliable and economic operation, the industry is now changing to an adequate responsibility of plant hardware and operation. Since the human factors has been not discussed methodically so far, there is still a lack of improved classification systems for human errors as well as a lack of methods for the systematic approach in designing the operator's working system, as for instance by using the job task analysis (J.T.A.). The J.T.A. appears to be an adequate method to study the human factor in the nuclear power plant operation, enabling an easy conversion to operational improvements. While the results of the analysis of human errors tell 'what' is to be improved, the J.T.A. shows 'how' to improve, for increasing the quality of the work and the safety of the operator's working system. The paper analyses the issue of setting the task and displays four criteria used to select aspects in NPP operation which require special consideration as personal training, design of control room, content and layout of the procedure manual, or organizing the operating personnel. The results are given as three tables giving: 1- Evaluation of deficiencies in the Working System; 2- Evaluation of the Deficiencies of Operator's Disposition; 3- Evaluation of the Mental Structure of Operation

A task analysis-linked approach for integrating the human factor in reliability assessments of nuclear power plants

International Nuclear Information System (INIS)

Ryan, T.G.

1988-01-01

This paper describes an emerging Task Analysis-Linked Evaluation Technique (TALENT) for assessing the contributions of human error to nuclear power plant systems unreliability and risk. Techniques such as TALENT are emerging as a recognition that human error is a primary contributor to plant safety, however, it has been a peripheral consideration to data in plant reliability evaluations. TALENT also recognizes that involvement of persons with behavioral science expertise is required to support plant reliability and risk analyses. A number of state-of-knowledge human reliability analysis tools are also discussed which support the TALENT process. The core of TALENT is comprised of task, timeline and interface analysis data which provide the technology base for event and fault tree development, serve as criteria for selecting and evaluating performance shaping factors, and which provide a basis for auditing TALENT results. Finally, programs and case studies used to refine the TALENT process are described along with future research needs in the area. (author)

Components of Task-Based Needs Analysis of the ESP Learners with the Specialization of Business and Tourism

Science.gov (United States)

Poghosyan, Naira

2016-01-01

In the following paper we shall thoroughly analyze the target learning needs of the learners within an ESP (English for Specific Purposes) context. The main concerns of ESP have always been and remain with the needs analysis, text analysis and preparing learners to communicate effectively in the tasks prescribed by their study or work situation.…

Brain processing of task-relevant and task-irrelevant emotional words: an ERP study.

Science.gov (United States)

González-Villar, Alberto J; Triñanes, Yolanda; Zurrón, Montserrat; Carrillo-de-la-Peña, María T

2014-09-01

Although there is evidence for preferential perceptual processing of written emotional information, the effects of attentional manipulations and the time course of affective processing require further clarification. In this study, we attempted to investigate how the emotional content of words modulates cerebral functioning (event-related potentials, ERPs) and behavior (reaction times, RTs) when the content is task-irrelevant (emotional Stroop Task, EST) or task-relevant (emotional categorization task, ECT), in a sample of healthy middle-aged women. In the EST, the RTs were longer for emotional words than for neutral words, and in the ECT, they were longer for neutral and negative words than for positive words. A principal components analysis of the ERPs identified various temporospatial factors that were differentially modified by emotional content. P2 was the first emotion-sensitive component, with enhanced factor scores for negative nouns across tasks. The N2 and late positive complex had enhanced factor scores for emotional relative to neutral information only in the ECT. The results reinforce the idea that written emotional information has a preferential processing route, both when it is task-irrelevant (producing behavioral interference) and when it is task-relevant (facilitating the categorization). After early automatic processing of the emotional content, late ERPs become more emotionally modulated as the level of attention to the valence increases.

The effect analysis of mediation variable of task productivity on the self-efficacy and employees’ performance

Directory of Open Access Journals (Sweden)

Annissa Chairum Soebandono

2016-11-01

Full Text Available This research was conducted for analyzing the effect of mediating variable that is individual task proactivity as one of the proactivities of behavior towards the relationship between self-efficacy and the employees’ performance in the logistics companies of shipping the goods. It uses convenience sampling, which is a non-probability sampling method for getting the sample of 52 employees. They were divided into two divisions, namely infrastructure and quality assurance. The questionnaire consists of two parts, in which some were assessed by themselves and others that were assessed by the supervisor. They were analyzed using path analysis using analytical tools developed by Hayes, Preacher-Hayes with the simple mediation models. It was found that employees have self-efficacy, individual task proactivity, and relatively high performance, in which individual task proactivity can be a mediating variable on the effect self-efficacy on performance.

A Task-Based Analysis of Information Requirements of Tactical Maps

Science.gov (United States)

1979-08-01

work began with the precept that military maps are primarily intended to serve users in the performance of functional tasks. By capitalizing on the task...Recherche Des Facteurs, Humaine de la Defense Natimla Onissels 2 Canadian ,losir Stall Washtington 1 C/Air Staff. Royal Canadian AF, ATTN: Pars Slid

Analysis of international and European policy instruments: pollution swapping . Task 2 Service contract "Integrated measures in agriculture to reduce ammonia emissions"

NARCIS (Netherlands)

Oenema, O.; Velthof, G.L.

2007-01-01

This Report describes the results of Task 2 ‘Analysis of International and European policy instruments’. The aim of this task is to analyze the existing International and European policy instruments aiming at reducing emissions of ammonia, nitrous oxide and methane to the atmosphere and nitrate to

Unsupervised segmentation of task activated regions in fmRI

DEFF Research Database (Denmark)

Røge, Rasmus; Madsen, Kristoffer Hougaard; Schmidt, Mikkel Nørgaard

2015-01-01

Functional Magnetic Resonance Imaging has become a central measuring modality to quantify functional activiation of the brain in both task and rest. Most analysis used to quantify functional activation requires supervised approaches as employed in statistical parametric mapping (SPM) to extract...... framework for the analysis of task fMRI and resting-state data in general where strong knowledge of how the task induces a BOLD response is missing....

Multifamily Retrofit Project Manager Job/Task Analysis and Report: September 2013

Energy Technology Data Exchange (ETDEWEB)

Owens, C. M.

2013-09-01

The development of job/task analyses (JTAs) is one of three components of the Guidelines for Home Energy Professionals project and will allow industry to develop training resources, quality assurance protocols, accredited training programs, and professional certifications. The Multifamily Retrofit Project Manager JTA identifies and catalogs all of the tasks performed by multifamily retrofit project managers, as well as the knowledge, skills, and abilities (KSAs) needed to perform the identified tasks.

Multifamily Quality Control Inspector Job/Task Analysis and Report: September 2013

Energy Technology Data Exchange (ETDEWEB)

Owens, C. M.

2013-09-01

The development of job/task analyses (JTAs) is one of three components of the Guidelines for Home Energy Professionals project and will allow industry to develop training resources, quality assurance protocols, accredited training programs, and professional certifications. The Multifamily Quality Control Inspector JTA identifies and catalogs all of the tasks performed by multifamily quality control inspectors, as well as the knowledge, skills, and abilities (KSAs) needed to perform the identified tasks.

The relationship between task conflict, task performance and team member satisfaction: the mediating role of relationship conflict

OpenAIRE

Hansen, Rebecca

2015-01-01

Task conflict and its potential positive effect on team outcomes has been questioned over the years. The findings have been inconsistent, with different studies indicating that task conflict can be positively related, negatively related or unrelated to measures of team outcomes. This study is a response to the request presented in de Wit, Greer and Jehn s (2012) recent meta-analysis, to further investigate the effect relationship conflict can have on the association between task conflict and...

Electroencephalogram complexity analysis in children with attention-deficit/hyperactivity disorder during a visual cognitive task.

Science.gov (United States)

Zarafshan, Hadi; Khaleghi, Ali; Mohammadi, Mohammad Reza; Moeini, Mahdi; Malmir, Nastaran

2016-01-01

The aim of this study was to investigate electroencephalogram (EEG) dynamics using complexity analysis in children with attention-deficit/hyperactivity disorder (ADHD) compared with healthy control children when performing a cognitive task. Thirty 7-12-year-old children meeting Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (DSM-5) criteria for ADHD and 30 healthy control children underwent an EEG evaluation during a cognitive task, and Lempel-Ziv complexity (LZC) values were computed. There were no significant differences between ADHD and control groups on age and gender. The mean LZC of the ADHD children was significantly larger than healthy children over the right anterior and right posterior regions during the cognitive performance. In the ADHD group, complexity of the right hemisphere was higher than that of the left hemisphere, but the complexity of the left hemisphere was higher than that of the right hemisphere in the normal group. Although fronto-striatal dysfunction is considered conclusive evidence for the pathophysiology of ADHD, our arithmetic mental task has provided evidence of structural and functional changes in the posterior regions and probably cerebellum in ADHD.

San Joaquin River Up-Stream DO TMDL Project Task 4: MonitoringStudy Interim Task Report #3

Energy Technology Data Exchange (ETDEWEB)

Stringfellow, William; Borglin, Sharon; Dahlgren, Randy; Hanlon,Jeremy; Graham, Justin; Burks, Remie; Hutchinson, Kathleen

2007-03-30

Lander Avenue.This data is specifically being collected to provide data for the Task 6Modeling effort. Task 4 provides input and calibration data for flow andWQ modeling associated with the low DO problems in the SJR watershed,including modeling on the linkage among nutrients, algae, and low DO.Task 4 is providing a higher volume of high quality and coherent data tothe modeling team than was available in the past for the upstream SJR.The monitoring and research activities under Task 4 are integrated withthe Modeling effort (Task 6) and are not designed to be a stand aloneprogram. Although, the majority of analysis of the Task 4 data isoccurring as part of the Task 6 Modeling program, analysis of Task 4 dataindependently of the modeling effort is also an important component ofthe DO TMDL Project effort. In this report, we present the results ofmonitoring and research conducted under Task 4. The major purposes ofthis report are to 1) document activities undertaken as part of theDOTMDL Project; 2) organize electronic data for delivery to Stateagencies, stakeholders and principal investigators (cooperators) on theDO TMDL Project; 3) provide a summary analysis of the data for referenceand to assist stakeholders in planning watershed activities inresponse tothe DO TMDL requirements; and 5) provide a preliminary scientificinterpretation independently of the Task 6 Modeling effort. Due to theextensive scope of theTask 4 portion of the DO TMDL Project, the Task 4March 2007 Interim Report is divided into a numbers of chapters andassociated appendixes designed to be able to stand1-3 independently ofeach other. The purpose of this chapter is to provide an overview of Task4 data collection and to explain the structure of the overallreport.

HIV/AIDS case management tasks and activities: the results of a functional analysis study.

Science.gov (United States)

Grube, B; Chernesky, R H

2001-01-01

Functional analysis, a variation of the time study technique, was used to examine how HIV/AIDS case managers in the tri-county region of New York State spend their time-the actual tasks and activities they choose to perform relative to the total universe of activities and tasks subsumed in the general category of case management. The picture developed was of a system operating primarily in a crisis mode, spending relatively brief amounts of time completing a range of activities and providing an extensive scope of services for or on behalf of clients. The bulk of the work was client centered, not administrative, and involved providing disease management and essential services (e.g., family and mental health). The implications of these findings are discussed, with particular attention paid to the potential influence of client profiles and worker demographics.

Neural correlates of interference resolution in the multi-source interference task: a meta-analysis of functional neuroimaging studies.

Science.gov (United States)

Deng, Yuqin; Wang, Xiaochun; Wang, Yan; Zhou, Chenglin

2018-04-10

Interference resolution refers to cognitive control processes enabling one to focus on task-related information while filtering out unrelated information. But the exact neural areas, which underlie a specific cognitive task on interference resolution, are still equivocal. The multi-source interference task (MSIT), as a particular cognitive task, is a well-established experimental paradigm used to evaluate interference resolution. Studies combining the MSIT with functional magnetic resonance imaging (fMRI) have shown that the MSIT evokes the dorsal anterior cingulate cortex (dACC) and cingulate-frontal-parietal cognitive-attentional networks. However, these brain areas have not been evaluated quantitatively and these findings have not been replicated. In the current study, we firstly report a voxel-based meta-analysis of functional brain activation associated with the MSIT so as to identify the localization of interference resolution in such a specific cognitive task. Articles on MSIT-related fMRI published between 2003 and July 2017 were eligible. The electronic databases searched included PubMed, Web of Knowledge, and Google Scholar. Differential BOLD activation patterns between the incongruent and congruent condition were meta-analyzed in anisotropic effect-size signed differential mapping software. Robustness meta-analysis indicated that two significant activation clusters were shown to have reliable functional activity in comparisons between incongruent and congruent conditions. The first reliable activation cluster, which included the dACC, medial prefrontal cortex, supplementary motor area, replicated the previous MSIT-related fMRI study results. Furthermore, we found another reliable activation cluster comprising areas of the right insula, right inferior frontal gyrus, and right lenticular nucleus-putamen, which were not typically discussed in previous MSIT-related fMRI studies. The current meta-analysis study presents the reliable brain activation patterns

Event-related potentials and secondary task performance during simulated driving.

Science.gov (United States)

Wester, A E; Böcker, K B E; Volkerts, E R; Verster, J C; Kenemans, J L

2008-01-01

Inattention and distraction account for a substantial number of traffic accidents. Therefore, we examined the impact of secondary task performance (an auditory oddball task) on a primary driving task (lane keeping). Twenty healthy participants performed two 20-min tests in the Divided Attention Steering Simulator (DASS). The visual secondary task of the DASS was replaced by an auditory oddball task to allow recording of brain activity. The driving task and the secondary (distracting) oddball task were presented in isolation and simultaneously, to assess their mutual interference. In addition to performance measures (lane keeping in the primary driving task and reaction speed in the secondary oddball task), brain activity, i.e. event-related potentials (ERPs), was recorded. Performance parameters on the driving test and the secondary oddball task did not differ between performance in isolation and simultaneous performance. However, when both tasks were performed simultaneously, reaction time variability increased in the secondary oddball task. Analysis of brain activity indicated that ERP amplitude (P3a amplitude) related to the secondary task, was significantly reduced when the task was performed simultaneously with the driving test. This study shows that when performing a simple secondary task during driving, performance of the driving task and this secondary task are both unaffected. However, analysis of brain activity shows reduced cortical processing of irrelevant, potentially distracting stimuli from the secondary task during driving.

Communications data delivery system analysis task 2 report : high-level options for secure communications data delivery systems.

Science.gov (United States)

2012-05-16

This Communications Data Delivery System Analysis Task 2 report describes and analyzes options for Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) communications data delivery systems using various communication media (Dedicated Short Ra...

Muscle Fatigue Analysis of the Deltoid during Three Head-Related Static Isometric Contraction Tasks

Directory of Open Access Journals (Sweden)

Wenxiang Cui

2017-05-01

Full Text Available This study aimed to investigate the fatiguing characteristics of muscle-tendon units (MTUs within skeletal muscles during static isometric contraction tasks. The deltoid was selected as the target muscle and three head-related static isometric contraction tasks were designed to activate three heads of the deltoid in different modes. Nine male subjects participated in this study. Surface electromyography (SEMG signals were collected synchronously from the three heads of the deltoid. The performances of five SEMG parameters, including root mean square (RMS, mean power frequency (MPF, the first coefficient of autoregressive model (ARC1, sample entropy (SE and Higuchi’s fractal dimension (HFD, in quantification of fatigue, were evaluated in terms of sensitivity to variability ratio (SVR and consistency firstly. Then, the HFD parameter was selected as the fatigue index for further muscle fatigue analysis. The experimental results demonstrated that the three deltoid heads presented different activation modes during three head-related fatiguing contractions. The fatiguing characteristics of the three heads were found to be task-dependent, and the heads kept in a relatively high activation level were more prone to fatigue. In addition, the differences in fatiguing rate between heads increased with the increase in load. The findings of this study can be helpful in better understanding the underlying neuromuscular control strategies of the central nervous system (CNS. Based on the results of this study, the CNS was thought to control the contraction of the deltoid by taking the three heads as functional units, but a certain synergy among heads might also exist to accomplish a contraction task.

Risk Assessment and Optimization for New or Novel Processes: Combining task analysis with 4D process simulation-framework and case study.

OpenAIRE

Leva, Maria Chiara; Gerbec, Marko; Balfe, Nora; Demichela, Micaela

2015-01-01

This paper describes work undertaken as part of the TOSCA project to develop approaches in-tegrating and enhancing safety, quality and productivity. The work reported here combines two existing ap-proaches: task analysis and 4D process simulation to model tasks in a 3D environment, thus creating a 4D model. The 4D model is next used for safety analysis (e.g., HAZOP a structured Hazid study) and optimiza-tion (e.g., Pareto type). The approach is demonstrated on an industrial case study involvi...

Human Factors Process Task Analysis Liquid Oxygen Pump Acceptance Test Procedure for the Advanced Technology Development Center

Science.gov (United States)

Diorio, Kimberly A.

2002-01-01

A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.

Decision paths in complex tasks

Science.gov (United States)

Galanter, Eugene

1991-01-01

Complex real world action and its prediction and control has escaped analysis by the classical methods of psychological research. The reason is that psychologists have no procedures to parse complex tasks into their constituents. Where such a division can be made, based say on expert judgment, there is no natural scale to measure the positive or negative values of the components. Even if we could assign numbers to task parts, we lack rules i.e., a theory, to combine them into a total task representation. We compare here two plausible theories for the amalgamation of the value of task components. Both of these theories require a numerical representation of motivation, for motivation is the primary variable that guides choice and action in well-learned tasks. We address this problem of motivational quantification and performance prediction by developing psychophysical scales of the desireability or aversiveness of task components based on utility scaling methods (Galanter 1990). We modify methods used originally to scale sensory magnitudes (Stevens and Galanter 1957), and that have been applied recently to the measure of task 'workload' by Gopher and Braune (1984). Our modification uses utility comparison scaling techniques which avoid the unnecessary assumptions made by Gopher and Braune. Formula for the utility of complex tasks based on the theoretical models are used to predict decision and choice of alternate paths to the same goal.

Uncertainty analysis in the task of individual monitoring data

International Nuclear Information System (INIS)

Molokanov, A.; Badjin, V.; Gasteva, G.; Antipin, E.

2003-01-01

Assessment of internal doses is an essential component of individual monitoring programmes for workers and consists of two stages: individual monitoring measurements and interpretation of the monitoring data in terms of annual intake and/or annual internal dose. The overall uncertainty in assessed dose is a combination of the uncertainties in these stages. An algorithm and a computer code were developed for estimating the uncertainties in these stages. An algorithm and a computer code were developed for estimating the uncertainty in the assessment of internal dose in the task of individual monitoring data interpretation. Two main influencing factors are analysed in this paper: the unknown time of the exposure and variability of bioassay measurements. The aim of this analysis is to show that the algorithm is applicable in designing an individual monitoring programme for workers so as to guarantee that the individual dose calculated from individual monitoring measurements does not exceed a required limit with a certain confidence probability. (author)

Study on the utilization of the cognitive architecture EPIC to the task analysis of a nuclear power plant operator

International Nuclear Information System (INIS)

Soares, Herculano Vieira

2003-02-01

This work presents a study of the use of the integrative cognitive architecture EPIC - Executive-Process - Interactive-Control, designed to evaluate the performance of a person performing tasks in parallel in a man-machine interface, as a methodology for Cognitive Task Analysis of a nuclear power plant operator. A comparison of the results obtained by the simulation by EPIC and the results obtained by application of the MHP model to the tasks performed by a shift operator during the execution of the procedure PO-E-3 - Steam Generator Tube Rupture of Angra 1 Nuclear Power Plant is done. To subsidize that comparison, an experiment was performed at the Angra 2 Nuclear Power Plant Full Scope Simulator in which three operator tasks were executed, its completion time measured and compared with the results of MHP and EPIC modeling. (author)

Masticatory muscle activity during deliberately performed oral tasks

International Nuclear Information System (INIS)

Farella, M; Palla, S; Erni, S; Gallo, L M; Michelotti, A

2008-01-01

The aim of this study was to investigate masticatory muscle activity during deliberately performed functional and non-functional oral tasks. Electromyographic (EMG) surface activity was recorded unilaterally from the masseter, anterior temporalis and suprahyoid muscles in 11 subjects (5 men, 6 women; age = 34.6 ± 10.8 years), who were accurately instructed to perform 30 different oral tasks under computer guidance using task markers. Data were analyzed by descriptive statistics, repeated measurements analysis of variance (ANOVA) and hierarchical cluster analysis. The maximum EMG amplitude of the masseter and anterior temporalis muscles was more often found during hard chewing tasks than during maximum clenching tasks. The relative contribution of masseter and anterior temporalis changed across the tasks examined (F ≥ 5.2; p ≤ 0.001). The masseter muscle was significantly (p ≤ 0.05) more active than the anterior temporalis muscle during tasks involving incisal biting, jaw protrusion, laterotrusion and jaw cupping, the difference being statistically significant (p ≤ 0.05). The anterior temporalis muscle was significantly (p ≤ 0.01) more active than the masseter muscle during tasks performed in intercuspal position, during tooth grinding, and during hard chewing on the working side. Based upon the relative contribution of the masseter, anterior temporalis, and suprahyoid muscles, the investigated oral tasks could be grouped into six separate clusters. The findings provided further insight into muscle- and task-specific EMG patterns during functional and non-functional oral behaviors

Measuring information processing in a client with extreme agitation following traumatic brain injury using the Perceive, Recall, Plan and Perform System of Task Analysis.

Science.gov (United States)

Nott, Melissa T; Chapparo, Christine

2008-09-01

Agitation following traumatic brain injury is characterised by a heightened state of activity with disorganised information processing that interferes with learning and achieving functional goals. This study aimed to identify information processing problems during task performance of a severely agitated adult using the Perceive, Recall, Plan and Perform (PRPP) System of Task Analysis. Second, this study aimed to examine the sensitivity of the PRPP System to changes in task performance over a short period of rehabilitation, and third, to evaluate the guidance provided by the PRPP in directing intervention. A case study research design was employed. The PRPP System of Task Analysis was used to assess changes in task embedded information processing capacity during occupational therapy intervention with a severely agitated adult in a rehabilitation context. Performance is assessed on three selected tasks over a one-month period. Information processing difficulties during task performance can be clearly identified when observing a severely agitated adult following a traumatic brain injury. Processing skills involving attention, sensory processing and planning were most affected at this stage of rehabilitation. These processing difficulties are linked to established descriptions of agitated behaviour. Fluctuations in performance across three tasks of differing processing complexity were evident, leading to hypothesised relationships between task complexity, environment and novelty with information processing errors. Changes in specific information processing capacity over time were evident based on repeated measures using the PRPP System of Task Analysis. This lends preliminary support for its utility as an outcome measure, and raises hypotheses about the type of therapy required to enhance information processing in people with severe agitation. The PRPP System is sensitive to information processing changes in severely agitated adults when used to reassess performance

Discovery of high-level tasks in the operating room

NARCIS (Netherlands)

Bouarfa, L.; Jonker, P.P.; Dankelman, J.

2010-01-01

Recognizing and understanding surgical high-level tasks from sensor readings is important for surgical workflow analysis. Surgical high-level task recognition is also a challenging task in ubiquitous computing because of the inherent uncertainty of sensor data and the complexity of the operating

Molecular modeling and structural analysis of two-pore domain potassium channels TASK1 interactions with the blocker A1899

Directory of Open Access Journals (Sweden)

David Mauricio Ramirez

2015-03-01

Full Text Available A1899 is a potent and highly selective blocker of the Two-pore domain potassium (K2P channel TASK-1, it acts as an antagonist blocking the K+ flux and binds to TASK-1 in the inner cavity and shows an activity in nanomolar order. This drug travels through the central cavity and finally binds in the bottom of the selectivity filter with some threonines and waters molecules forming a H-bond network and several hydrophobic interactions. Using alanine mutagenesis screens the binding site was identify involving residues in the P1 and P2 pore loops, the M2 and M4 transmembrane segments, and the halothane response element; mutations were introduced in the human TASK-1 (KCNK3, NM_002246 expressed in Oocytes from anesthetized Xenopus laevis frogs. Based in molecular modeling and structural analysis as such as molecular docking and binding free energy calculations a pose was suggested using a TASK-1 homology models. Recently, various K2P crystal structures have been obtained. We want redefined – from a structural point of view – the binding mode of A1899 in TASK-1 homology models using as a template the K2P crystal structures. By computational structural analysis we describe the molecular basis of the A1899 binding mode, how A1899 travel to its binding site and suggest an interacting pose (Figure 1. after 100 ns of molecular dynamics simulation (MDs we found an intra H-Bond (80% of the total MDs, a H-Bond whit Thr93 (42% of the total MDs, a pi-pi stacking interaction between a ring and Phe125 (88% of the total MDs and several water bridges. Our experimental and computational results allow the molecular understanding of the structural binding mechanism of the selective blocker A1899 to TASK-1 channels. We identified the structural common and divergent features of TASK-1 channel through our theoretical and experimental studies of A1899 drug action.

The approach to engineering tasks composition on knowledge portals

Science.gov (United States)

Novogrudska, Rina; Globa, Larysa; Schill, Alexsander; Romaniuk, Ryszard; Wójcik, Waldemar; Karnakova, Gaini; Kalizhanova, Aliya

2017-08-01

The paper presents an approach to engineering tasks composition on engineering knowledge portals. The specific features of engineering tasks are highlighted, their analysis makes the basis for partial engineering tasks integration. The formal algebraic system for engineering tasks composition is proposed, allowing to set the context-independent formal structures for engineering tasks elements' description. The method of engineering tasks composition is developed that allows to integrate partial calculation tasks into general calculation tasks on engineering portals, performed on user request demand. The real world scenario «Calculation of the strength for the power components of magnetic systems» is represented, approving the applicability and efficiency of proposed approach.

Task-specific modulation of human auditory evoked responses in a delayed-match-to-sample task

Directory of Open Access Journals (Sweden)

Feng eRong

2011-05-01

Full Text Available In this study, we focus our investigation on task-specific cognitive modulation of early cortical auditory processing in human cerebral cortex. During the experiments, we acquired whole-head magnetoencephalography (MEG data while participants were performing an auditory delayed-match-to-sample (DMS task and associated control tasks. Using a spatial filtering beamformer technique to simultaneously estimate multiple source activities inside the human brain, we observed a significant DMS-specific suppression of the auditory evoked response to the second stimulus in a sound pair, with the center of the effect being located in the vicinity of the left auditory cortex. For the right auditory cortex, a non-invariant suppression effect was observed in both DMS and control tasks. Furthermore, analysis of coherence revealed a beta band (12 ~ 20 Hz DMS-specific enhanced functional interaction between the sources in left auditory cortex and those in left inferior frontal gyrus, which has been shown to involve in short-term memory processing during the delay period of DMS task. Our findings support the view that early evoked cortical responses to incoming acoustic stimuli can be modulated by task-specific cognitive functions by means of frontal-temporal functional interactions.

Analysis of Mexico wind tunnel measurements. Final report of IEA Task 29, Mexnext (Phase 1)

Energy Technology Data Exchange (ETDEWEB)

Schepers, J.G.; Boorsma, K. [Energy research Center of the Netherlands ECN, Petten (Netherlands); Cho, T. [Korea Aerospace Research Institute KARI, Daejeon (Korea, Republic of); Gomez-Iradi, S. [National Renewable Energy Center of Spain CENER, Sarriguren (Spain); Schaffarczyk, P. [A. Jeromin University of Applied Sciences, CEWind EG, Kiel (Germany); Shen, W.Z. [The Technical University of Denmark, Kongens Lyngby (Denmark); Lutz, T. [K. Meister University of Stuttgart, Stuttgart (Germany); Stoevesandt, B. [ForWind, Zentrum fuer Windenergieforschung, Oldenburg (Germany); Schreck, S. [National Renewable Energy Laboratory NREL, Golden, CO (United States); Micallef, D.; Pereira, R.; Sant, T. [Delft University of Technology TUD, Delft (Netherlands); Madsen, H.A.; Soerensen, N. [Risoe-DTU, Roskilde (Denmark)

2012-02-15

This report describes the work performed within the first phase of IEA Task 29 Mexnext. In this IEA Task 29 a total of 20 organisations from 11 different countries collaborated in analysing the measurements which have been performed in the EU project 'Mexico'. Within this Mexico project 9 European institutes carried out a wind tunnel experiment in the Large Low Speed Facility (LLF) of the German Dutch Wind Facilities DNW on a rotor with a diameter of 4.5 m. Pressure distributions were measured at five locations along the blade along with detailed flow field measurements around the rotor plane using stereo PIV. As a result of the international collaboration within this task a very thorough analysis of the data could be carried out and a large number of codes were validated not only in terms of loads but also in terms of underlying flow field. The detailed pressure measurements along the blade in combination with the detailed flow field measurements gave a unique opportunity to better understand the response of a wind turbine to the incoming flow field. Deficiencies in modelling have been established and directions for model improvement can be given.

Teaching Sustainable Process Design Using 12 Systematic Computer-Aided Tasks

DEFF Research Database (Denmark)

Babi, Deenesh K.

2015-01-01

(tasks 4-7) and then sizing, costing and economic analysis of the designed process (tasks 8-9). This produces a base case design. In tasks 10-12, the student explores opportunities for heat and/or mass integration, followed by a sustainability analysis, in order to evaluate the base case design and set......In this paper a task-based approach for teaching (sustainable) process design to students pursuing a degree in chemical and biochemical engineering is presented. In tasks 1-3 the student makes design decisions for product and process selection followed by simple and rigorous model simulations...... targets for further improvement. Finally, a process optimization problem is formulated and solved to obtain the more sustainable process design. The 12 tasks are explained in terms of input and output of each task and examples of application of this approach in an MSclevel course are reported....

Adapting Cognitive Task Analysis to Investigate Clinical Decision Making and Medication Safety Incidents.

Science.gov (United States)

Russ, Alissa L; Militello, Laura G; Glassman, Peter A; Arthur, Karen J; Zillich, Alan J; Weiner, Michael

2017-05-03

Cognitive task analysis (CTA) can yield valuable insights into healthcare professionals' cognition and inform system design to promote safe, quality care. Our objective was to adapt CTA-the critical decision method, specifically-to investigate patient safety incidents, overcome barriers to implementing this method, and facilitate more widespread use of cognitive task analysis in healthcare. We adapted CTA to facilitate recruitment of healthcare professionals and developed a data collection tool to capture incidents as they occurred. We also leveraged the electronic health record (EHR) to expand data capture and used EHR-stimulated recall to aid reconstruction of safety incidents. We investigated 3 categories of medication-related incidents: adverse drug reactions, drug-drug interactions, and drug-disease interactions. Healthcare professionals submitted incidents, and a subset of incidents was selected for CTA. We analyzed several outcomes to characterize incident capture and completed CTA interviews. We captured 101 incidents. Eighty incidents (79%) met eligibility criteria. We completed 60 CTA interviews, 20 for each incident category. Capturing incidents before interviews allowed us to shorten the interview duration and reduced reliance on healthcare professionals' recall. Incorporating the EHR into CTA enriched data collection. The adapted CTA technique was successful in capturing specific categories of safety incidents. Our approach may be especially useful for investigating safety incidents that healthcare professionals "fix and forget." Our innovations to CTA are expected to expand the application of this method in healthcare and inform a wide range of studies on clinical decision making and patient safety.

SemEval-2016 task 10

DEFF Research Database (Denmark)

Schneider, Nathan; Hovy, Dirk; Johannsen, Anders Trærup

2016-01-01

This task combines the labeling of multiword expressions and supersenses (coarse-grained classes) in an explicit, yet broad-coverage paradigm for lexical semantics. Nine systems participated; the best scored 57.7% F1 in a multi-domain evaluation setting, indicating that the task remains largely...... unresolved. An error analysis reveals that a large number of instances in the data set are either hard cases, which no systems get right, or easy cases, which all systems correctly solve....

Performance-based training: from job and task analysis to training materials

International Nuclear Information System (INIS)

Davis, L.T.; Spinney, R.W.

1983-01-01

Historically, the smoke filled room approach has been used to revise training programs: instructors would sit down and design a program based on existing training materials and any federal requirements that applied. This failure to reflect a systematic definition of required job functions, responsibilities and performance standards in training programs has resulted in generic program deficiencies: they do not provide complete training of required skills and knowledge. Recognition of this need for change, coupled with a decrease in experienced industry personnel inputs and long training pipelines, has heightened the need for efficient performance-based training programs which are derived from and referenced to job performance criteria. This paper presents the process for developing performance-based training materials based on job and task analysis products

STATE-OF-THE-ART TASKS AND ACHIEVEMENTS OF PARALINGUISTIC SPEECH ANALYSIS SYSTEMS

Directory of Open Access Journals (Sweden)

A. A. Karpov

2016-07-01

Full Text Available We present analytical survey of state-of-the-art actual tasks in the area of computational paralinguistics, as well as the recent achievements of automatic systems for paralinguistic analysis of conversational speech. Paralinguistics studies non-verbal aspects of human communication and speech such as: natural emotions, accents, psycho-physiological states, pronunciation features, speaker’s voice parameters, etc. We describe architecture of a baseline computer system for acoustical paralinguistic analysis, its main components and useful speech processing methods. We present some information on an International contest called Computational Paralinguistics Challenge (ComParE, which is held each year since 2009 in the framework of the International conference INTERSPEECH organized by the International Speech Communication Association. We present sub-challenges (tasks that were proposed at the ComParE Challenges in 2009-2016, and analyze winning computer systems for each sub-challenge and obtained results. The last completed ComParE-2015 Challenge was organized in September 2015 in Germany and proposed 3 sub-challenges: 1 Degree of Nativeness (DN sub-challenge, determination of nativeness degree of speakers based on acoustics; 2 Parkinson's Condition (PC sub-challenge, recognition of a degree of Parkinson’s condition based on speech analysis; 3 Eating Condition (EC sub-challenge, determination of the eating condition state during speaking or a dialogue, and classification of consumed food type (one of seven classes of food by the speaker. In the last sub-challenge (EC, the winner was a joint Turkish-Russian team consisting of the authors of the given paper. We have developed the most efficient computer-based system for detection and classification of the corresponding (EC acoustical paralinguistic events. The paper deals with the architecture of this system, its main modules and methods, as well as the description of used training and evaluation

Effects of noise and task loading on a communication task loading on a communication task

Science.gov (United States)

Orrell, Dean H., II

Previous research had shown the effect of noise on a single communication task. This research has been criticized as not being representative of a real world situation since subjects allocated all of their attention to only one task. In the present study, the effect of adding a loading task to a standard noise-communication paradigm was investigated. Subjects performed both a communication task (Modified Rhyme Test; House et al. 1965) and a short term memory task (Sternberg, 1969) in simulated levels of aircraft noise (95, 105 and 115 dB overall sound pressure level (OASPL)). Task loading was varied with Sternberg's task by requiring subjects to memorize one, four, or six alphanumeric characters. Simulated aircraft noise was varied between levels of 95, 105 and 115 dB OASPL using a pink noise source. Results show that the addition of Sternberg's task and little effect on the intelligibility of the communication task while response time for the communication task increased.

Who multi-tasks and why? Multi-tasking ability, perceived multi-tasking ability, impulsivity, and sensation seeking.

Science.gov (United States)

Sanbonmatsu, David M; Strayer, David L; Medeiros-Ward, Nathan; Watson, Jason M

2013-01-01

The present study examined the relationship between personality and individual differences in multi-tasking ability. Participants enrolled at the University of Utah completed measures of multi-tasking activity, perceived multi-tasking ability, impulsivity, and sensation seeking. In addition, they performed the Operation Span in order to assess their executive control and actual multi-tasking ability. The findings indicate that the persons who are most capable of multi-tasking effectively are not the persons who are most likely to engage in multiple tasks simultaneously. To the contrary, multi-tasking activity as measured by the Media Multitasking Inventory and self-reported cell phone usage while driving were negatively correlated with actual multi-tasking ability. Multi-tasking was positively correlated with participants' perceived ability to multi-task ability which was found to be significantly inflated. Participants with a strong approach orientation and a weak avoidance orientation--high levels of impulsivity and sensation seeking--reported greater multi-tasking behavior. Finally, the findings suggest that people often engage in multi-tasking because they are less able to block out distractions and focus on a singular task. Participants with less executive control--low scorers on the Operation Span task and persons high in impulsivity--tended to report higher levels of multi-tasking activity.

Who multi-tasks and why? Multi-tasking ability, perceived multi-tasking ability, impulsivity, and sensation seeking.

Directory of Open Access Journals (Sweden)

David M Sanbonmatsu

Full Text Available The present study examined the relationship between personality and individual differences in multi-tasking ability. Participants enrolled at the University of Utah completed measures of multi-tasking activity, perceived multi-tasking ability, impulsivity, and sensation seeking. In addition, they performed the Operation Span in order to assess their executive control and actual multi-tasking ability. The findings indicate that the persons who are most capable of multi-tasking effectively are not the persons who are most likely to engage in multiple tasks simultaneously. To the contrary, multi-tasking activity as measured by the Media Multitasking Inventory and self-reported cell phone usage while driving were negatively correlated with actual multi-tasking ability. Multi-tasking was positively correlated with participants' perceived ability to multi-task ability which was found to be significantly inflated. Participants with a strong approach orientation and a weak avoidance orientation--high levels of impulsivity and sensation seeking--reported greater multi-tasking behavior. Finally, the findings suggest that people often engage in multi-tasking because they are less able to block out distractions and focus on a singular task. Participants with less executive control--low scorers on the Operation Span task and persons high in impulsivity--tended to report higher levels of multi-tasking activity.

Who Multi-Tasks and Why? Multi-Tasking Ability, Perceived Multi-Tasking Ability, Impulsivity, and Sensation Seeking

Science.gov (United States)

Sanbonmatsu, David M.; Strayer, David L.; Medeiros-Ward, Nathan; Watson, Jason M.

2013-01-01

The present study examined the relationship between personality and individual differences in multi-tasking ability. Participants enrolled at the University of Utah completed measures of multi-tasking activity, perceived multi-tasking ability, impulsivity, and sensation seeking. In addition, they performed the Operation Span in order to assess their executive control and actual multi-tasking ability. The findings indicate that the persons who are most capable of multi-tasking effectively are not the persons who are most likely to engage in multiple tasks simultaneously. To the contrary, multi-tasking activity as measured by the Media Multitasking Inventory and self-reported cell phone usage while driving were negatively correlated with actual multi-tasking ability. Multi-tasking was positively correlated with participants’ perceived ability to multi-task ability which was found to be significantly inflated. Participants with a strong approach orientation and a weak avoidance orientation – high levels of impulsivity and sensation seeking – reported greater multi-tasking behavior. Finally, the findings suggest that people often engage in multi-tasking because they are less able to block out distractions and focus on a singular task. Participants with less executive control - low scorers on the Operation Span task and persons high in impulsivity - tended to report higher levels of multi-tasking activity. PMID:23372720

A Work-Demand Analysis Compatible with Preemption-Aware Scheduling for Power-Aware Real-Time Tasks

Directory of Open Access Journals (Sweden)

Da-Ren Chen

2013-01-01

Full Text Available Due to the importance of slack time utilization for power-aware scheduling algorithms,we propose a work-demand analysis method called parareclamation algorithm (PRA to increase slack time utilization of the existing real-time DVS algorithms. PRA is an online scheduling for power-aware real-time tasks under rate-monotonic (RM policy. It can be implemented and fully compatible with preemption-aware or transition-aware scheduling algorithms without increasing their computational complexities. The key technique of the heuristics method doubles the analytical interval and turns the deferrable workload out the potential slack time. Theoretical proofs show that PRA guarantees the task deadlines in a feasible RM schedule and takes linear time and space complexities. Experimental results indicate that the proposed method combining the preemption-aware methods seamlessly reduces the energy consumption by 14% on average over their original algorithms.

The task-to-task communication between computers

International Nuclear Information System (INIS)

Lin Shuzi; Zhang Bingyun; Zhao Weiren

1992-01-01

The task-to-task communication is used in the Institute of High Energy Physics. The BES (Beijing Spectrometer) uses the communication mode to take some of the BEPC (Beijing Electron Positron Collider) running parameters needed by BES experiments in a periodic time. The authors describe the principle of transparent task-to-task communication and how to use it in BES on-line data acquisition system

The Analysis of Task and Data Characteristic and the Collaborative Processing Method in Real-Time Visualization Pipeline of Urban 3DGIS

Directory of Open Access Journals (Sweden)

Dongbo Zhou

2017-03-01

Full Text Available Parallel processing in the real-time visualization of three-dimensional Geographic Information Systems (3DGIS has tended to concentrate on algorithm levels in recent years, and most of the existing methods employ multiple threads in a Central Processing Unit (CPU or kernel in a Graphics Processing Unit (GPU to improve efficiency in the computation of the Level of Details (LODs for three-dimensional (3D Models and in the display of Digital Elevation Models (DEMs and Digital Orthphoto Maps (DOMs. The systematic analysis of the task and data characteristics of parallelism in the real-time visualization of 3DGIS continues to fall behind the development of hardware. In this paper, the basic procedures of real-time visualization of urban 3DGIS are first reviewed, and then the real-time visualization pipeline is analyzed. Further, the pipeline is decomposed into different task stages based on the task order and the input-output dependency. Based on the analysis of task parallelism in different pipeline stages, the data parallelism characteristics in each task are summarized by studying the involved algorithms. Finally, this paper proposes a parallel co-processing mode and a collaborative strategy for real-time visualization of urban 3DGIS. It also provides a fundamental basis for developing parallel algorithms and strategies in 3DGIS.

Task-Driven Comparison of Topic Models.

Science.gov (United States)

Alexander, Eric; Gleicher, Michael

2016-01-01

Topic modeling, a method of statistically extracting thematic content from a large collection of texts, is used for a wide variety of tasks within text analysis. Though there are a growing number of tools and techniques for exploring single models, comparisons between models are generally reduced to a small set of numerical metrics. These metrics may or may not reflect a model's performance on the analyst's intended task, and can therefore be insufficient to diagnose what causes differences between models. In this paper, we explore task-centric topic model comparison, considering how we can both provide detail for a more nuanced understanding of differences and address the wealth of tasks for which topic models are used. We derive comparison tasks from single-model uses of topic models, which predominantly fall into the categories of understanding topics, understanding similarity, and understanding change. Finally, we provide several visualization techniques that facilitate these tasks, including buddy plots, which combine color and position encodings to allow analysts to readily view changes in document similarity.

Abnormal Brain Activation During Theory of Mind Tasks in Schizophrenia: A Meta-Analysis.

Science.gov (United States)

Kronbichler, Lisa; Tschernegg, Melanie; Martin, Anna Isabel; Schurz, Matthias; Kronbichler, Martin

2017-10-21

Social cognition abilities are severely impaired in schizophrenia (SZ). The current meta-analysis used foci of 21 individual studies on functional abnormalities in the schizophrenic brain in order to identify regions that reveal convergent under- or over-activation during theory of mind (TOM) tasks. Studies were included in the analyses when contrasting tasks that require the processing of mental states with tasks which did not. Only studies that investigated patients with an ICD or DSM diagnosis were included. Quantitative voxel-based meta-analyses were done using Seed-based d Mapping software. Common TOM regions like medial-prefrontal cortex and temporo-parietal junction revealed abnormal activation in schizophrenic patients: Under-activation was identified in the medial prefrontal cortex, left orbito-frontal cortex, and in a small section of the left posterior temporo-parietal junction. Remarkably, robust over-activation was identified in a more dorsal, bilateral section of the temporo-parietal junction. Further abnormal activation was identified in medial occipito-parietal cortex, right premotor areas, left cingulate gyrus, and lingual gyrus. The findings of this study suggest that SZ patients simultaneously show over- and under-activation in TOM-related regions. Especially interesting, temporo-parietal junction reveals diverging activation patterns with an under-activating left posterior and an over-activating bilateral dorsal section. In conclusion, SZ patients show less specialized brain activation in regions linked to TOM and increased activation in attention-related networks suggesting compensatory effects. © The Author 2017. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center.

Analysis of the Latin Square Task with Linear Logistic Test Models

Science.gov (United States)

Zeuch, Nina; Holling, Heinz; Kuhn, Jorg-Tobias

2011-01-01

The Latin Square Task (LST) was developed by Birney, Halford, and Andrews [Birney, D. P., Halford, G. S., & Andrews, G. (2006). Measuring the influence of cognitive complexity on relational reasoning: The development of the Latin Square Task. Educational and Psychological Measurement, 66, 146-171.] and represents a non-domain specific,…

Trait Mindfulness and Cognitive Task Performance

Directory of Open Access Journals (Sweden)

Emalee J. W. Quickel

2014-11-01

Full Text Available Mindfulness meditation (MM training has been shown to have positive effects on working memory and focused attention tasks. Clarifying the construct of mindfulness is important so that mindfulness can be studied effectively in individual differences and cognition research. The current study tested whether trait mindfulness alone explains any of the variability on task performance. Five commonly used mindfulness scales, as well as six standardized and experimental attention and working memory tasks were administered to 164 participants with no meditation experience. Confirmatory factor analysis found that the common variance denoted by measures of trait mindfulness is unrelated to the common variance among tasks requiring focused attention. These results indicate that mindfulness scales may not be capturing the attentional aspects of mindfulness. Individuals who score high on mindfulness scales do not perform better on focused attention tasks than those who score lower on mindfulness scales. These results have implications for defining and operationalizing mindfulness.

Frontal theta EEG dynamics in a real-world air traffic control task.

Science.gov (United States)

Shou, Guofa; Ding, Lei

2013-01-01

Mental workload and time-on-task effect are two major factors expediting fatigue progress, which leads to performance decline and/or failure in real-world tasks. In the present study, electroencephalography (EEG) is applied to study mental fatigue development during an air traffic control (ATC) task. Specifically, the frontal theta EEG dynamics are firstly dissolved into a unique frontal independent component (IC) through a novel time-frequency independent component analysis (tfICA) method. Then the temporal fluctuations of the identified frontal ICs every minute are compared to workload (reflected by number of clicks per minute) and time-on-task effect by correlational analysis and linear regression analysis. It is observed that the frontal theta activity significantly increase with workload augment and time-on-task. The present study demonstrates that the frontal theta EEG activity identified by tfICA method is a sensitive and reliable metric to assess mental workload and time-on-task effect in a real-world task, i.e., ATC task, at the resolution of minute(s).

Vigilance task-related change in brain functional connectivity as revealed by wavelet phase coherence analysis of near-infrared spectroscopy signals

Directory of Open Access Journals (Sweden)

Wang Wei

2016-08-01

Full Text Available This study aims to assess the vigilance task-related change in connectivity in healthy adults using wavelet phase coherence (WPCO analysis of near-infrared spectroscopy signals (NIRS. NIRS is a non-invasive neuroimaging technique for assessing brain activity. Continuous recordings of the NIRS signals were obtained from the prefrontal cortex (PFC and sensorimotor cortical areas of 20 young healthy adults (24.9±3.3 years during a 10-min resting state and a 20-min vigilance task state. The vigilance task was used to simulate driving mental load by judging three random numbers (i.e., whether odd numbers. The task was divided into two sessions: the first 10 minutes (Task t1 and the second 10 minutes (Task t2. The WPCO of six channel pairs were calculated in five frequency intervals: 0.6–2 Hz (I, 0.145–0.6 Hz (II, 0.052–0.145 Hz (III, 0.021–0.052 Hz (IV, and 0.0095–0.021 Hz (V. The significant WPCO formed global connectivity (GC maps in intervals I and II and functional connectivity (FC maps in intervals III to V. Results show that the GC levels in interval I and FC levels in interval III were significantly lower in the Task t2 than in the resting state (p < 0.05, particularly between the left PFC and bilateral sensorimotor regions. Also, the reaction time shows an increase in Task t2 compared with that in Task t1. However, no significant difference in WPCO was found between Task t1 and resting state. The results showed that the change in FC at the range of 0.6-2 Hz was not attributed to the vigilance task pe se, but the interaction effect of vigilance task and time factors. The findings suggest that the decreased attention level might be partly attributed to the reduced GC levels between the left prefrontal region and sensorimotor area. The present results provide a new insight into the vigilance task-related brain activity.

Lessons Learned from Crowdsourcing Complex Engineering Tasks.

Science.gov (United States)

Staffelbach, Matthew; Sempolinski, Peter; Kijewski-Correa, Tracy; Thain, Douglas; Wei, Daniel; Kareem, Ahsan; Madey, Gregory

2015-01-01

Crowdsourcing is the practice of obtaining needed ideas, services, or content by requesting contributions from a large group of people. Amazon Mechanical Turk is a web marketplace for crowdsourcing microtasks, such as answering surveys and image tagging. We explored the limits of crowdsourcing by using Mechanical Turk for a more complicated task: analysis and creation of wind simulations. Our investigation examined the feasibility of using crowdsourcing for complex, highly technical tasks. This was done to determine if the benefits of crowdsourcing could be harnessed to accurately and effectively contribute to solving complex real world engineering problems. Of course, untrained crowds cannot be used as a mere substitute for trained expertise. Rather, we sought to understand how crowd workers can be used as a large pool of labor for a preliminary analysis of complex data. We compared the skill of the anonymous crowd workers from Amazon Mechanical Turk with that of civil engineering graduate students, making a first pass at analyzing wind simulation data. For the first phase, we posted analysis questions to Amazon crowd workers and to two groups of civil engineering graduate students. A second phase of our experiment instructed crowd workers and students to create simulations on our Virtual Wind Tunnel website to solve a more complex task. With a sufficiently comprehensive tutorial and compensation similar to typical crowd-sourcing wages, we were able to enlist crowd workers to effectively complete longer, more complex tasks with competence comparable to that of graduate students with more comprehensive, expert-level knowledge. Furthermore, more complex tasks require increased communication with the workers. As tasks become more complex, the employment relationship begins to become more akin to outsourcing than crowdsourcing. Through this investigation, we were able to stretch and explore the limits of crowdsourcing as a tool for solving complex problems.

Lessons from a pilot project in cognitive task analysis: the potential role of intermediates in preclinical teaching in dental education.

Science.gov (United States)

Walker, Judith; von Bergmann, HsingChi

2015-03-01

The purpose of this study was to explore the use of cognitive task analysis to inform the teaching of psychomotor skills and cognitive strategies in clinical tasks in dental education. Methods used were observing and videotaping an expert at one dental school thinking aloud while performing a specific preclinical task (in a simulated environment), interviewing the expert to probe deeper into his thinking processes, and applying the same procedures to analyze the performance of three second-year dental students who had recently learned the analyzed task and who represented a spectrum of their cohort's ability to undertake the procedure. The investigators sought to understand how experts (clinical educators) and intermediates (trained students) overlapped and differed at points in the procedure that represented the highest cognitive load, known as "critical incidents." Findings from this study and previous research identified possible limitations of current clinical teaching as a result of expert blind spots. These findings coupled with the growing evidence of the effectiveness of peer teaching suggest the potential role of intermediates in helping novices learn preclinical dentistry tasks.

DOE Defense Program (DP) safety programs. Final report, Task 003

International Nuclear Information System (INIS)

1998-01-01

The overall objective of the work on Task 003 of Subcontract 9-X52-W7423-1 was to provide LANL with support to the DOE Defense Program (DP) Safety Programs. The effort included the identification of appropriate safety requirements, the refinement of a DP-specific Safety Analysis Report (SAR) Format and Content Guide (FCG) and Comprehensive Review Plan (CRP), incorporation of graded approach instructions into the guidance, and the development of a safety analysis methodologies document. All tasks which were assigned under this Task Order were completed. Descriptions of the objectives of each task and effort performed to complete each objective is provided here

Analysis of human-in-the-loop tele-operated maintenance inspection tasks using VR

International Nuclear Information System (INIS)

Boessenkool, H.; Abbink, D.A.; Heemskerk, C.J.M.; Steinbuch, M.; Baar, M.R. de; Wildenbeest, J.G.W.; Ronden, D.; Koning, J.F.

2013-01-01

Highlights: ► Execution of tele-operated inspection tasks for ITER maintenance was analyzed. ► Human factors experiments using Virtual Reality showed to be a valuable approach. ► A large variation in time performance and number of collisions was found. ► Results indicate significant room for improvement for teleoperated free space tasks. ► A promising solution is haptic shared control: assist operator with guiding forces. -- Abstract: One of the challenges in future fusion plants such as ITER is the remote maintenance of the plant. Foreseen human-in-the-loop tele-operation is characterized by limited visual and haptic feedback from the environment, which results in degraded task performance and increased operator workload. For improved tele-operated task performance it is required to get insight in the expected tasks and problems during maintenance at ITER. By means of an exploratory human factor experiment, this paper analyses problems and bottlenecks during the execution of foreseen tele-operated maintenance at ITER, identifying most promising areas of improvement. The focus of this paper is on free space (sub)tasks where contact with the environment needs to be avoided. A group of 5 subjects was asked to carry-out an ITER related free space task (visual inspection), using a six degree of freedom master device connected to a simulated hot cell environment. The results show large variation in time performance between subjects and an increasing number of collisions for more difficult tasks, indicating room for improvement for free space (sub)tasks. The results will be used in future research on the haptic guidance strategies in the ITER Remote Handling framework

Analysis of human-in-the-loop tele-operated maintenance inspection tasks using VR

Energy Technology Data Exchange (ETDEWEB)

Boessenkool, H., E-mail: h.boessenkool@differ.nl [FOM Institute DIFFER (Dutch Institute for Fundamental Energy Research), Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Eindhoven University of Technology, Department of Mechanical Engineering, Dynamics and Control Group, PO Box 513, 5600 MB Eindhoven (Netherlands); Abbink, D.A. [Delft University of Technology, Faculty of 3mE, BioMechanical Engineering Department, Mekelweg 2, 2628 CD Delft (Netherlands); Heemskerk, C.J.M. [Heemskerk Innovative Technology B.V., Jonckerweg 12, 2201 DZ Noordwijk (Netherlands); Steinbuch, M. [Eindhoven University of Technology, Department of Mechanical Engineering, Dynamics and Control Group, PO Box 513, 5600 MB Eindhoven (Netherlands); Baar, M.R. de [FOM Institute DIFFER (Dutch Institute for Fundamental Energy Research), Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Eindhoven University of Technology, Department of Mechanical Engineering, Dynamics and Control Group, PO Box 513, 5600 MB Eindhoven (Netherlands); Wildenbeest, J.G.W. [Delft University of Technology, Faculty of 3mE, BioMechanical Engineering Department, Mekelweg 2, 2628 CD Delft (Netherlands); Heemskerk Innovative Technology B.V., Jonckerweg 12, 2201 DZ Noordwijk (Netherlands); Ronden, D. [FOM Institute DIFFER (Dutch Institute for Fundamental Energy Research), Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Koning, J.F. [Heemskerk Innovative Technology B.V., Jonckerweg 12, 2201 DZ Noordwijk (Netherlands)

2013-10-15

Highlights: ► Execution of tele-operated inspection tasks for ITER maintenance was analyzed. ► Human factors experiments using Virtual Reality showed to be a valuable approach. ► A large variation in time performance and number of collisions was found. ► Results indicate significant room for improvement for teleoperated free space tasks. ► A promising solution is haptic shared control: assist operator with guiding forces. -- Abstract: One of the challenges in future fusion plants such as ITER is the remote maintenance of the plant. Foreseen human-in-the-loop tele-operation is characterized by limited visual and haptic feedback from the environment, which results in degraded task performance and increased operator workload. For improved tele-operated task performance it is required to get insight in the expected tasks and problems during maintenance at ITER. By means of an exploratory human factor experiment, this paper analyses problems and bottlenecks during the execution of foreseen tele-operated maintenance at ITER, identifying most promising areas of improvement. The focus of this paper is on free space (sub)tasks where contact with the environment needs to be avoided. A group of 5 subjects was asked to carry-out an ITER related free space task (visual inspection), using a six degree of freedom master device connected to a simulated hot cell environment. The results show large variation in time performance between subjects and an increasing number of collisions for more difficult tasks, indicating room for improvement for free space (sub)tasks. The results will be used in future research on the haptic guidance strategies in the ITER Remote Handling framework.

Generic cognitive adaptations to task interference in task switching

NARCIS (Netherlands)

Poljac, E.; Bekkering, H.

2009-01-01

The present study investigated how the activation of previous tasks interferes with the execution of future tasks as a result of temporal manipulations. Color and shape matching tasks were organized in runs of two trials each. The tasks were specified by a cue presented before a task run, cueing

Go4: multithreaded inter-task communication with ROOT - writing non-blocking GUIs

International Nuclear Information System (INIS)

Adamczewski, J.; Al-Turany, M.; Bertini, D.; Essel, H.G.

2001-01-01

The future GSI Online-Offline-Object-Oriented analysis framework Go4 based on ROOT [CERN, R.Brun et al] provides a mechanism to monitor and control an analysis at any time. This is achieved by running the GUI and the analysis in different tasks. To control these tasks by one non-blocking GUI, the Go4 TaskHandler package was developed. It offers an asynchronous inter task communication via independent channels for commands, data, and status information. Each channel is processed by a dedicated thread and has a buffer queue as interface to the working thread. The threads are controlled by the Go4ThreadManager package, based on the ROOT TThread package. In parallel to the GUI actions, the analysis tasks can display objects like histograms in the GUI. A test GUI was implemented using the Qt widget library (Trolltech Inc.). A Qt to ROOT interface has been developed. The Go4 packages may be utilized for any ROOT application that requires to control independent data processing or monitoring tasks from a non-blocking GUI

Better dual-task processing in simultaneous interpreters

Science.gov (United States)

Strobach, Tilo; Becker, Maxi; Schubert, Torsten; Kühn, Simone

2015-01-01

Simultaneous interpreting (SI) is a highly complex activity and requires the performance and coordination of multiple, simultaneous tasks: analysis and understanding of the discourse in a first language, reformulating linguistic material, storing of intermediate processing steps, and language production in a second language among others. It is, however, an open issue whether persons with experience in SI possess superior skills in coordination of multiple tasks and whether they are able to transfer these skills to lab-based dual-task situations. Within the present study, we set out to explore whether interpreting experience is associated with related higher-order executive functioning in the context of dual-task situations of the Psychological Refractory Period (PRP) type. In this PRP situation, we found faster reactions times in participants with experience in simultaneous interpretation in contrast to control participants without such experience. Thus, simultaneous interpreters possess superior skills in coordination of multiple tasks in lab-based dual-task situations. PMID:26528232

Working Memory Training Improves Dual-Task Performance on Motor Tasks.

Science.gov (United States)

Kimura, Takehide; Kaneko, Fuminari; Nagahata, Keita; Shibata, Eriko; Aoki, Nobuhiro

2017-01-01

The authors investigated whether working memory training improves motor-motor dual-task performance consisted of upper and lower limb tasks. The upper limb task was a simple reaction task and the lower limb task was an isometric knee extension task. 45 participants (age = 21.8 ± 1.6 years) were classified into a working memory training group (WM-TRG), dual-task training group, or control group. The training duration was 2 weeks (15 min, 4 times/week). Our results indicated that working memory capacity increased significantly only in the WM-TRG. Dual-task performance improved in the WM-TRG and dual-task training group. Our study provides the novel insight that working memory training improves dual-task performance without specific training on the target motor task.

Use of Human Modeling Simulation Software in the Task Analysis of the Environmental Control and Life Support System Component Installation Procedures

Science.gov (United States)

Estes, Samantha; Parker, Nelson C. (Technical Monitor)

2001-01-01

Virtual reality and simulation applications are becoming widespread in human task analysis. These programs have many benefits for the Human Factors Engineering field. Not only do creating and using virtual environments for human engineering analyses save money and time, this approach also promotes user experimentation and provides increased quality of analyses. This paper explains the human engineering task analysis performed on the Environmental Control and Life Support System (ECLSS) space station rack and its Distillation Assembly (DA) subsystem using EAI's human modeling simulation software, Jack. When installed on the International Space Station (ISS), ECLSS will provide the life and environment support needed to adequately sustain crew life. The DA is an Orbital Replaceable Unit (ORU) that provides means of wastewater (primarily urine from flight crew and experimental animals) reclamation. Jack was used to create a model of the weightless environment of the ISS Node 3, where the ECLSS is housed. Computer aided drawings of the ECLSS rack and DA system were also brought into the environment. Anthropometric models of a 95th percentile male and 5th percentile female were used to examine the human interfaces encountered during various ECLSS and DA tasks. The results of the task analyses were used in suggesting modifications to hardware and crew task procedures to improve accessibility, conserve crew time, and add convenience for the crew. This paper will address some of those suggested modifications and the method of presenting final analyses for requirements verification.

Subjective task complexity in the control room

International Nuclear Information System (INIS)

Braarud, Per Oeivind

2000-05-01

Understanding of what makes a control room situation difficult to handle is important when studying operator performance, both with respect to prediction as well as improvement of the human performance. Previous exploratory work on complexity showed a potential for prediction and explanation of operator performance. This report investigates in further detail the theoretical background and the structure of operator rated task complexity. The report complements the previous work on complexity to make a basis for development of operator performance analysis tools. The first part of the report outlines an approach for studying the complexity of the control room crew's work. The approach draws upon man-machine research as well as problem solving research. The approach identifies five complexity-shaping components: 'task work characteristics', 'teamwork characteristics', 'individual skill', 'teamwork skill', and 'interface and support systems'. The crew's work complexity is related to concepts of human performance quality and human error. The second part of the report is a post-hoc exploratory analysis of four empirical HRP studies, where operators' conception of the complexity of control room work is assessed by questionnaires. The analysis deals with the structure of complexity questionnaire ratings, and the relationship between complexity ratings and human performance measures. The main findings from the analysis of structure was the identification of three task work factors which were named Masking, Information load and Temporal demand, and in addition the identification of one interface factor which was named Navigation. Post-hoc analysis suggests that operator's subjective complexity, which was assessed by questionnaires, is related to workload, task and system performance, and operator's self-rated performance. (Author). 28 refs., 47 tabs

Author response to letter. Ref: Madsen et al. "Unnecessary work tasks and mental health: a prospective analysis of Danish human service workers".

Science.gov (United States)

Madsen, Ida Eh; Rugulies, Reiner

2015-03-01

unnecessary or bothersome, but may correspond to work periods that allow for temporary rest". We find this suggestion curious and are not aware of any empirical studies to support this claim. Consequently, we encourage the authors of the commentary to test their hypothesis empirically. Any such empirical evidence would be a welcome advancement to the scientific knowledge concerning the mental health consequences of unnecessary work tasks. As the results of our study do not indicate that unnecessary work tasks could be beneficial to mental health, but indeed that they could be harmful, we find no reason to modify the conclusions of our article. References 1. Durand-Moreau Q, Loddé B, Dewitte J-D. Ref: Madsen et al. "Unnecessary work tasks and mental health: a prospective analysis of Danish human service workers". Scand J Work Environ Health - online first. http://dx.doi.org/10.5271/sjweh.3473. 2. Madsen IEH, Tripathi M, Borritz M, Rugulies R, Unnecessary work tasks and mental health: a prospective analysis of Danish human service workers, Scand J Work Environ Health. 2014;40(6):631-8. http://dx.doi.org/10.5271/sjweh.3453.  3. Semmer NK, Tschan F, Meier LL, Facchin S, Jacobshagen N, Illegitimate tasks and counterproductive work behavior, Appl Psychol. 2010;59:70-96. http://dx.doi.org/10.1111/j.1464-0597.2009.00416.x.  4. Durand MJ, Vézina N, Baril R, Loisel P, Richard MC, Ngomo S, Margin of manoeuvre indicators in the workplace during the rehabilitation process: a qualitative analysis, J Occup Rehab. 2009;19:194-202. http://dx.doi.org/10.1007/s10926-009-9173-4.

Cognitive task analysis and the design of computerized operator aids

International Nuclear Information System (INIS)

Andersson, H.

1985-01-01

The new technological possibilities have led to the initiation of many projects for the design and evaluation of computerized operator support systems to be implemented in nuclear power plant control rooms. A typical finding so far has been that operators often have a positive attitude towards such systems but still don't use them very much, mostly because they find almost the same information on the conventional control boards which they are accustomed to use. Still, however, there is a widely shared belief that conventional control rooms have short-comings that make the use of computerized aids necessary. One reason for the limited success so far is that the new systems often are poorly integrated with the existing conventional instrumentation and with the working procedures. The reluctance to use new computer based aids, despite their nice features, is therefore probably caused by an inadequate task analysis made prior to the design of these computerized operator support systems

Change Best: Task 2.3. Analysis of policy mix and development of Energy Efficiency Services

International Nuclear Information System (INIS)

Boonekamp, P.; Vethman, P.

2010-04-01

The aim of the Change Best project is to promote the development of an energy efficiency service (EES) market and to give good practice examples of changes in energy service business, strategies, and supportive policies and measures in the course of the implementation of Directive 2006/32/EC on Energy End-Use Efficiency and Energy Services. This report addresses task 2.3: Analysis of policy mix and development of Energy Efficiency Services.

ITER safety task NID-5a: ITER tritium environmental source terms - safety analysis basis

International Nuclear Information System (INIS)

Natalizio, A.; Kalyanam, K.M.

1994-09-01

The Canadian Fusion Fuels Technology Project's (CFFTP) is part of the contribution to ITER task NID-5a, Initial Tritium Source Term. This safety analysis basis constitutes the first part of the work for establishing tritium source terms and is intended to solicit comments and obtain agreement. The analysis objective is to provide an early estimate of tritium environmental source terms for the events to be analyzed. Events that would result in the loss of tritium are: a Loss of Coolant Accident (LOCA), a vacuum vessel boundary breach. a torus exhaust line failure, a fuelling machine process boundary failure, a fuel processing system process boundary failure, a water detritiation system process boundary failure and an isotope separation system process boundary failure. 9 figs

Team situation awareness in nuclear power plant process control: A literature review, task analysis and future research

International Nuclear Information System (INIS)

Ma, R.; Kaber, D. B.; Jones, J. M.; Starkey, R. L.

2006-01-01

Operator achievement and maintenance of situation awareness (SA) in nuclear power plant (NPP) process control has emerged as an important concept in defining effective relationships between humans and automation in this complex system. A literature review on factors influencing SA revealed several variables to be important to team SA, including the overall task and team goals, individual tasks, team member roles, and the team members themselves. Team SA can also be adversely affected by a range of factors, including stress, mental over- or under-loading, system design (including human-machine interface design), complexity, human error in perception, and automation. Our research focused on the analysis of 'shared' SA and team SA among an assumed three-person, main-control-room team. Shared SA requirements represent the knowledge that is held in common by NPP operators, and team SA represents the collective, unique knowledge of all operators. The paper describes an approach to goal-directed task analysis (GDTA) applied to NPP main control room operations. In general, the GDTA method reveals critical operator decision and information requirements. It identifies operator SA requirements relevant to performing complex systems control. The GDTA can reveal requirements at various levels of cognitive processing, including perception, comprehension and projection, in NPP process control. Based on the literature review and GDTA approach, a number of potential research issues are proposed with an aim toward understanding and facilitating team SA in NPP process control. (authors)

Enhanced Neuroactivation during Working Memory Task in Postmenopausal Women Receiving Hormone Therapy: A Coordinate-Based Meta-Analysis.

Science.gov (United States)

Li, Ke; Huang, Xiaoyan; Han, Yingping; Zhang, Jun; Lai, Yuhan; Yuan, Li; Lu, Jiaojiao; Zeng, Dong

2015-01-01

Hormone therapy (HT) has long been thought beneficial for controlling menopausal symptoms and human cognition. Studies have suggested that HT has a positive association with working memory, but no consistent relationship between HT and neural activity has been shown in any cognitive domain. The purpose of this meta-analysis was to assess the convergence of findings from published randomized control trials studies that examined brain activation changes in postmenopausal women. A systematic search for fMRI studies of neural responses during working memory tasks in postmenopausal women was performed. Studies were excluded if they were not treatment studies and did not contain placebo or blank controls. For the purpose of the meta-analysis, 8 studies were identified, with 103 postmenopausal women taking HT and 109 controls. Compared with controls, postmenopausal women who took HT increased activation in the left frontal lobe, including superior frontal gyrus (BA 8), right middle frontal gyrus (BA 9), anterior lobe, paracentral lobule (BA 7), limbic lobe, and anterior cingulate (BA 32). Additionally, decreased activation is noted in the right limbic lobe, including parahippocampal gyrus (BA 28), left parietal lobe, and superior parietal lobule (BA 7). All regions were significant at p ≤ 0.05 with correction for multiple comparisons. Hormone treatment is associated with BOLD signal activation in key anatomical areas during fMRI working memory tasks in healthy hormone-treated postmenopausal women. A positive correlation between activation and task performance suggests that hormone use may benefit working memory.

Development of the complex of nuclear-physical methods of analysis for geology and technology tasks in Kazakhstan

International Nuclear Information System (INIS)

Solodukhin, V.; Silachyov, I.; Poznyak, V.; Gorlachev, I.

2016-01-01

The paper describes the development of nuclear-physical methods of analysis and their applications in Kazakhstan for geological tasks and technology. The basic methods of this complex include instrumental neutron-activation analysis, x-ray fluorescent analysis and instrumental γ-spectrometry. The following aspects are discussed: applications of developed and adopted analytical techniques for assessment and calculations of rare-earth metal reserves at various deposits in Kazakhstan, for technology development of mining and extraction from uranium-phosphorous ore and wastes, for radioactive coal gasification technology, for studies of rare metal contents in chromite, bauxites, black shales and their processing products. (author)

Task Switching in a Hierarchical Task Structure: Evidence for the Fragility of the Task Repetition Benefit

Science.gov (United States)

Lien, Mei-Ching; Ruthruff, Eric

2004-01-01

This study examined how task switching is affected by hierarchical task organization. Traditional task-switching studies, which use a constant temporal and spatial distance between each task element (defined as a stimulus requiring a response), promote a flat task structure. Using this approach, Experiment 1 revealed a large switch cost of 238 ms.…

Planning performance in schizophrenia patients: a meta-analysis of the influence of task difficulty and clinical and sociodemographic variables.

Science.gov (United States)

Knapp, F; Viechtbauer, W; Leonhart, R; Nitschke, K; Kaller, C P

2017-08-01

Despite a large body of research on planning performance in adult schizophrenia patients, results of individual studies are equivocal, suggesting either no, moderate or severe planning deficits. This meta-analysis therefore aimed to quantify planning deficits in schizophrenia and to examine potential sources of the heterogeneity seen in the literature. The meta-analysis comprised outcomes of planning accuracy of 1377 schizophrenia patients and 1477 healthy controls from 31 different studies which assessed planning performance using tower tasks such as the Tower of London, the Tower of Hanoi and the Stockings of Cambridge. A meta-regression analysis was applied to assess the influence of potential moderator variables (i.e. sociodemographic and clinical variables as well as task difficulty). The findings indeed demonstrated a planning deficit in schizophrenia patients (mean effect size: ; 95% confidence interval 0.56-0.78) that was moderated by task difficulty in terms of the minimum number of moves required for a solution. The results did not reveal any significant relationship between the extent of planning deficits and sociodemographic or clinical variables. The current results provide first meta-analytic evidence for the commonly assumed impairments of planning performance in schizophrenia. Deficits are more likely to become manifest in problem items with higher demands on planning ahead, which may at least partly explain the heterogeneity of previous findings. As only a small fraction of studies reported coherent information on sample characteristics, future meta-analyses would benefit from more systematic reports on those variables.

CMS Dashboard Task Monitoring: A user-centric monitoring view

International Nuclear Information System (INIS)

Karavakis, Edward; Khan, Akram; Andreeva, Julia; Maier, Gerhild; Gaidioz, Benjamin

2010-01-01

We are now in a phase change of the CMS experiment where people are turning more intensely to physics analysis and away from construction. This brings a lot of challenging issues with respect to monitoring of the user analysis. The physicists must be able to monitor the execution status, application and grid-level messages of their tasks that may run at any site within the CMS Virtual Organisation. The CMS Dashboard Task Monitoring project provides this information towards individual analysis users by collecting and exposing a user-centric set of information regarding submitted tasks including reason of failure, distribution by site and over time, consumed time and efficiency. The development was user-driven with physicists invited to test the prototype in order to assemble further requirements and identify weaknesses with the application.

RELATIONSHIP BETWEEN THE TASK AVERSIVENESS AND ACADEMIC PROCRASTINATION

Directory of Open Access Journals (Sweden)

Magvirasari Lestari Linra

2016-12-01

Full Text Available Academic procrastination occurs when certain tasks are considered unpleasant, an unpleasant task and the usual delayed them is the task of writing, reading, studying for the exam, meetings, and administrative. The purpose of this study was to determine the relationship of the task aversiveness with academic procrastination. Subject of the study were 100 students out of a population of 516 students of the Faculty of Psychology class of 2012-2014. The method used in this research is quantitative by using Spearman rho as data analysis techniques. The research instrument consists of academic procrastination scale and the scale of the task aversiveness. Based on the results of correlation is known that there is a positive relationship between task aversiveness with academic procrastination with a correlation coefficient r = 0.508; p = 0.000. The results showed that of the 100 students of the Faculty of Psychology University of Makassar has a degree of relationship between task aversiveness with academic procrastination is on the very low category (25, 8%. Area / types of tasks delayed is not necessarily an unpleasant task and otherwise unpleasant task may not be postponed. Area task the highest level of aversive and delays are areas the task of writing and reading. This study illustrates that academic procrastination can be lowered by a change in the mindset of an unpleasant task.

Effects of a cognitive dual task on variability and local dynamic stability in sustained repetitive arm movements using principal component analysis: a pilot study.

Science.gov (United States)

Longo, Alessia; Federolf, Peter; Haid, Thomas; Meulenbroek, Ruud

2018-06-01

In many daily jobs, repetitive arm movements are performed for extended periods of time under continuous cognitive demands. Even highly monotonous tasks exhibit an inherent motor variability and subtle fluctuations in movement stability. Variability and stability are different aspects of system dynamics, whose magnitude may be further affected by a cognitive load. Thus, the aim of the study was to explore and compare the effects of a cognitive dual task on the variability and local dynamic stability in a repetitive bimanual task. Thirteen healthy volunteers performed the repetitive motor task with and without a concurrent cognitive task of counting aloud backwards in multiples of three. Upper-body 3D kinematics were collected and postural reconfigurations-the variability related to the volunteer's postural change-were determined through a principal component analysis-based procedure. Subsequently, the most salient component was selected for the analysis of (1) cycle-to-cycle spatial and temporal variability, and (2) local dynamic stability as reflected by the largest Lyapunov exponent. Finally, end-point variability was evaluated as a control measure. The dual cognitive task proved to increase the temporal variability and reduce the local dynamic stability, marginally decrease endpoint variability, and substantially lower the incidence of postural reconfigurations. Particularly, the latter effect is considered to be relevant for the prevention of work-related musculoskeletal disorders since reduced variability in sustained repetitive tasks might increase the risk of overuse injuries.

Task-set inertia and memory-consolidation bottleneck in dual tasks.

Science.gov (United States)

Koch, Iring; Rumiati, Raffaella I

2006-11-01

Three dual-task experiments examined the influence of processing a briefly presented visual object for deferred verbal report on performance in an unrelated auditory-manual reaction time (RT) task. RT was increased at short stimulus-onset asynchronies (SOAs) relative to long SOAs, showing that memory consolidation processes can produce a functional processing bottleneck in dual-task performance. In addition, the experiments manipulated the spatial compatibility of the orientation of the visual object and the side of the speeded manual response. This cross-task compatibility produced relative RT benefits only when the instruction for the visual task emphasized overlap at the level of response codes across the task sets (Experiment 1). However, once the effective task set was in place, it continued to produce cross-task compatibility effects even in single-task situations ("ignore" trials in Experiment 2) and when instructions for the visual task did not explicitly require spatial coding of object orientation (Experiment 3). Taken together, the data suggest a considerable degree of task-set inertia in dual-task performance, which is also reinforced by finding costs of switching task sequences (e.g., AC --> BC vs. BC --> BC) in Experiment 3.

The analysis of probability task completion; Taxonomy of probabilistic thinking-based across gender in elementary school students

Science.gov (United States)

Sari, Dwi Ivayana; Budayasa, I. Ketut; Juniati, Dwi

2017-08-01

Formulation of mathematical learning goals now is not only oriented on cognitive product, but also leads to cognitive process, which is probabilistic thinking. Probabilistic thinking is needed by students to make a decision. Elementary school students are required to develop probabilistic thinking as foundation to learn probability at higher level. A framework of probabilistic thinking of students had been developed by using SOLO taxonomy, which consists of prestructural probabilistic thinking, unistructural probabilistic thinking, multistructural probabilistic thinking and relational probabilistic thinking. This study aimed to analyze of probability task completion based on taxonomy of probabilistic thinking. The subjects were two students of fifth grade; boy and girl. Subjects were selected by giving test of mathematical ability and then based on high math ability. Subjects were given probability tasks consisting of sample space, probability of an event and probability comparison. The data analysis consisted of categorization, reduction, interpretation and conclusion. Credibility of data used time triangulation. The results was level of boy's probabilistic thinking in completing probability tasks indicated multistructural probabilistic thinking, while level of girl's probabilistic thinking in completing probability tasks indicated unistructural probabilistic thinking. The results indicated that level of boy's probabilistic thinking was higher than level of girl's probabilistic thinking. The results could contribute to curriculum developer in developing probability learning goals for elementary school students. Indeed, teachers could teach probability with regarding gender difference.

Pressurized fluidized-bed hydroretorting of eastern oil shales. Volume 4, Task 5, Operation of PFH on beneficiated shale, Task 6, Environmental data and mitigation analyses and Task 7, Sample procurement, preparation, and characterization: Final report, September 1987--May 1991

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

The objective of Task 5 (Operation of Pressurized Fluidized-Bed Hydro-Retorting (PFH) on Beneficiated Shale) was to modify the PFH process to facilitate its use for fine-sized, beneficiated Eastern shales. This task was divided into 3 subtasks: Non-Reactive Testing, Reactive Testing, and Data Analysis and Correlations. The potential environment impacts of PFH processing of oil shale must be assessed throughout the development program to ensure that the appropriate technologies are in place to mitigate any adverse effects. The overall objectives of Task 6 (Environmental Data and Mitigation Analyses) were to obtain environmental data relating to PFH and shale beneficiation and to analyze the potential environmental impacts of the integrated PFH process. The task was divided into the following four subtasks. Characterization of Processed Shales (IGT), 6.2. Water Availability and Treatment Studies, 6.3. Heavy Metals Removal and 6.4. PFH Systems Analysis. The objective of Task 7 (Sample Procurement, Preparation, and Characterization) was to procure, prepare, and characterize raw and beneficiated bulk samples of Eastern oil shale for all of the experimental tasks in the program. Accomplishments for these tasks are presented.

Who Multi-Tasks and Why? Multi-Tasking Ability, Perceived Multi-Tasking Ability, Impulsivity, and Sensation Seeking

OpenAIRE

Sanbonmatsu, David M.; Strayer, David L.; Medeiros-Ward, Nathan; Watson, Jason M.

2013-01-01

The present study examined the relationship between personality and individual differences in multi-tasking ability. Participants enrolled at the University of Utah completed measures of multi-tasking activity, perceived multi-tasking ability, impulsivity, and sensation seeking. In addition, they performed the Operation Span in order to assess their executive control and actual multi-tasking ability. The findings indicate that the persons who are most capable of multi-tasking effectively are ...

Persistency and flexibility of complex brain networks underlie dual-task interference.

Science.gov (United States)

Alavash, Mohsen; Hilgetag, Claus C; Thiel, Christiane M; Gießing, Carsten

2015-09-01

Previous studies on multitasking suggest that performance decline during concurrent task processing arises from interfering brain modules. Here, we used graph-theoretical network analysis to define functional brain modules and relate the modular organization of complex brain networks to behavioral dual-task costs. Based on resting-state and task fMRI we explored two organizational aspects potentially associated with behavioral interference when human subjects performed a visuospatial and speech task simultaneously: the topological overlap between persistent single-task modules, and the flexibility of single-task modules in adaptation to the dual-task condition. Participants showed a significant decline in visuospatial accuracy in the dual-task compared with single visuospatial task. Global analysis of topological similarity between modules revealed that the overlap between single-task modules significantly correlated with the decline in visuospatial accuracy. Subjects with larger overlap between single-task modules showed higher behavioral interference. Furthermore, lower flexible reconfiguration of single-task modules in adaptation to the dual-task condition significantly correlated with larger decline in visuospatial accuracy. Subjects with lower modular flexibility showed higher behavioral interference. At the regional level, higher overlap between single-task modules and less modular flexibility in the somatomotor cortex positively correlated with the decline in visuospatial accuracy. Additionally, higher modular flexibility in cingulate and frontal control areas and lower flexibility in right-lateralized nodes comprising the middle occipital and superior temporal gyri supported dual-tasking. Our results suggest that persistency and flexibility of brain modules are important determinants of dual-task costs. We conclude that efficient dual-tasking benefits from a specific balance between flexibility and rigidity of functional brain modules. © 2015 Wiley

Multiple-task real-time PDP-15 operating system for data acquisition and analysis

International Nuclear Information System (INIS)

Myers, W.R.

1974-01-01

The RAMOS operating system is capable of handling up to 72 simultaneous tasks in an interrupt-driven environment. The minimum viable hardware configuration includes a Digital Equipment Corporation PDP-15 computer with 16384 words of memory, extended arithmetic element, automatic priority interrupt, a 256K-word RS09 DECdisk, two DECtape transports, and an alphanumeric keyboard/typer. The monitor executes major tasks by loading disk-resident modules to memory for execution; modules are written in a format that allows page-relocation by the monitor, and can be loaded into any available page. All requests for monitor service by tasks, including input/output, floating point arithmetic, request for additional memory, task initiation, etc., are implemented by privileged monitor calls (CAL). All IO device handlers are capable of queuing requests for service, allowing several tasks ''simultaneous'' use of all resources. All alphanumeric IO (including the PC05) is completely buffered and handled by a single multiplexing routine. The floating point arithmetic software is re-entrant to all operating modules and includes matrix arithmetic functions. One of the system tasks can be a ''batch'' job, controlled by simulating an alphanumeric command terminal through cooperative functions of the disk handler and alphanumeric device software. An alphanumeric control sequence may be executed, automatically accessing disk-resident tasks in any prescribed order; a library of control sequences is maintained on bulk storage for access by the monitor. (auth)

THE SPECIFIC AND GENERAL NATURE OF LOGISTICS TASKS

Directory of Open Access Journals (Sweden)

Beáta Sz. G. Pató

2016-12-01

Full Text Available There are many ways to define and to describe jobs and assigning to people. This is a key issue in both blue collar and in white collar jobs. This analysis focuses on the work content of jobs in logistics. However, the methodology allows the exploration of closely related issues to determine competence requirements as well. Jobs can be seen to have bearing on many areas including effectiveness, efficiency of individual and organizational level, social and political issues. The purpose of the research carried out by authors was to identify the necessary competencies in logistics jobs. It included the analysis of the tasks using company document (job description analysis in order to identify the tasks and required competencies. Researchers extracted and then standardized the verb - noun pairs which described the tasks. The frequency of these pairs gave the weight of the task in a job. This method allowed the researchers to determine the overlapping rate of activities in different fields (trade, transport, comprehensive activities. It was found that the most different/independent field in the terms of similarities is warehousing. Results suggest the rethinking of the training content in order to find the right balance between the general and specific competencies. They also help organizations to optimize the composition of cross-functional staff.

Correlating behavioral responses to FMRI signals from human prefrontal cortex: examining cognitive processes using task analysis.

Science.gov (United States)

DeSouza, Joseph F X; Ovaysikia, Shima; Pynn, Laura

2012-06-20

The aim of this methods paper is to describe how to implement a neuroimaging technique to examine complementary brain processes engaged by two similar tasks. Participants' behavior during task performance in an fMRI scanner can then be correlated to the brain activity using the blood-oxygen-level-dependent signal. We measure behavior to be able to sort correct trials, where the subject performed the task correctly and then be able to examine the brain signals related to correct performance. Conversely, if subjects do not perform the task correctly, and these trials are included in the same analysis with the correct trials we would introduce trials that were not only for correct performance. Thus, in many cases these errors can be used themselves to then correlate brain activity to them. We describe two complementary tasks that are used in our lab to examine the brain during suppression of an automatic responses: the stroop(1) and anti-saccade tasks. The emotional stroop paradigm instructs participants to either report the superimposed emotional 'word' across the affective faces or the facial 'expressions' of the face stimuli(1,2). When the word and the facial expression refer to different emotions, a conflict between what must be said and what is automatically read occurs. The participant has to resolve the conflict between two simultaneously competing processes of word reading and facial expression. Our urge to read out a word leads to strong 'stimulus-response (SR)' associations; hence inhibiting these strong SR's is difficult and participants are prone to making errors. Overcoming this conflict and directing attention away from the face or the word requires the subject to inhibit bottom up processes which typically directs attention to the more salient stimulus. Similarly, in the anti-saccade task(3,4,5,6), where an instruction cue is used to direct only attention to a peripheral stimulus location but then the eye movement is made to the mirror opposite position

Rapid analysis of hay attributes using NIRS. Final report, Task II alfalfa supply system

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-10-24

This final report provides technical information on the development of a near infrared reflectance spectroscopy (NIRS) system for the analysis of alfalfa hay. The purpose of the system is to provide consistent quality for processing alfalfa stems for fuel and alfalfa leaf meal products for livestock feed. Project tasks were to: (1) develop an NIRS driven analytical system for analysis of alfalfa hay and processed alfalfa products; (2) assist in hiring a qualified NIRS technician and recommend changes in testing equipment necessary to provide accurate analysis; (3) calibrate the NIRS instrument for accurate analyses; and (4) develop prototype equipment and sampling procedures as a first step towards development of a totally automated sampling system that would rapidly sample and record incoming feedstock and outbound product. An accurate hay testing program was developed, along with calibration equations for analyzing alfalfa hay and sun-cured alfalfa pellets. A preliminary leaf steam calibration protocol was also developed. 7 refs., 11 figs., 10 tabs.

Critical Analysis on the Defeat of Task Force Ranger

National Research Council Canada - National Science Library

Day, Clifford

1997-01-01

.... The final stage, UNOSOM II, involved a peace enforcement and nation building mission. On Sunday, 3 October 1993, the relative success of UNOSOM II suddenly turned violent when a US Task Force came under heavy fire from Somali gunmen...

Do exercises used in injury prevention programmes modify cutting task biomechanics? A systematic review with meta-analysis.

Science.gov (United States)

Pappas, Evangelos; Nightingale, Elizabeth J; Simic, Milena; Ford, Kevin R; Hewett, Timothy E; Myer, Gregory D

2015-05-01

Some injury prevention programmes aim to reduce the risk of ACL rupture. Although the most common athletic task leading to ACL rupture is cutting, there is currently no consensus on how injury prevention programmes influence cutting task biomechanics. To systematically review and synthesise the scientific literature regarding the influence of injury prevention programme exercises on cutting task biomechanics. The three largest databases (Medline, EMBASE and CINAHL) were searched for studies that investigated the effect of injury prevention programmes on cutting task biomechanics. When possible meta-analyses were performed. Seven studies met the inclusion criteria. Across all studies, a total of 100 participants received exercises that are part of ACL injury prevention programmes and 76 participants served in control groups. Most studies evaluated variables associated with the quadriceps dominance theory. The meta-analysis revealed decreased lateral hamstrings electromyography activity (p ≤ 0.05) while single studies revealed decreased quadriceps and increased medial hamstrings activity and decreased peak knee flexion moment. Findings from single studies reported that ACL injury prevention exercises reduce neuromuscular deficits (knee valgus moment, lateral trunk leaning) associated with the ligament and trunk dominance theories, respectively. The programmes we analysed appear most effective when they emphasise individualised biomechanical technique correction and target postpubertal women. The exercises used in injury prevention programmes have the potential to improve cutting task biomechanics by ameliorating neuromuscular deficits linked to ACL rupture, especially when they emphasise individualised biomechanical technique correction and target postpubertal female athletes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Scalability of Several Asynchronous Many-Task Models for In Situ Statistical Analysis.

Energy Technology Data Exchange (ETDEWEB)

Pebay, Philippe Pierre [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Bennett, Janine Camille [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Kolla, Hemanth [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Borghesi, Giulio [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2017-05-01

This report is a sequel to [PB16], in which we provided a first progress report on research and development towards a scalable, asynchronous many-task, in situ statistical analysis engine using the Legion runtime system. This earlier work included a prototype implementation of a proposed solution, using a proxy mini-application as a surrogate for a full-scale scientific simulation code. The first scalability studies were conducted with the above on modestly-sized experimental clusters. In contrast, in the current work we have integrated our in situ analysis engines with a full-size scientific application (S3D, using the Legion-SPMD model), and have conducted nu- merical tests on the largest computational platform currently available for DOE science ap- plications. We also provide details regarding the design and development of a light-weight asynchronous collectives library. We describe how this library is utilized within our SPMD- Legion S3D workflow, and compare the data aggregation technique deployed herein to the approach taken within our previous work.

Brain wave correlates of attentional states: Event related potentials and quantitative EEG analysis during performance of cognitive and perceptual tasks

Science.gov (United States)

Freeman, Frederick G.

1993-01-01

presented target stimulus. In addition to the task requirements, irrelevant tones were presented in the background. Research has shown that even though these stimuli are not attended, ERP's to them can still be elicited. The amplitude of the ERP waves has been shown to change as a function of a person's level of alertness. ERP's were also collected and analyzed for the target stimuli for each task. Brain maps were produced based on the ERP voltages for the different stimuli. In addition to the ERP's, a quantitative EEG (QEEG) was performed on the data using a fast Fourier technique to produce a power spectral analysis of the EEG. This analysis was conducted on the continuous EEG while the subjects were performing the tasks. Finally, a QEEG was performed on periods during the task when subjects indicated that they were in an altered state of awareness. During the tasks, subjects were asked to indicate by pressing a button when they realized their level of task awareness had changed. EEG epochs were collected for times just before and just after subjects made this reponse. The purpose of this final analysis was to determine whether or not subjective indices of level of awareness could be correlated with different patterns of EEG.

Risk assessment of maintenance operations: the analysis of performing task and accident mechanism.

Science.gov (United States)

Carrillo-Castrillo, Jesús A; Rubio-Romero, Juan Carlos; Guadix, Jose; Onieva, Luis

2015-01-01

Maintenance operations cover a great number of occupations. Most small and medium-sized enterprises lack the appropriate information to conduct risk assessments of maintenance operations. The objective of this research is to provide a method based on the concepts of task and accident mechanisms for an initial risk assessment by taking into consideration the prevalence and severity of the maintenance accidents reported. Data were gathered from 11,190 reported accidents in maintenance operations in the manufacturing sector of Andalusia from 2003 to 2012. By using a semi-quantitative methodology, likelihood and severity were evaluated based on the actual distribution of accident mechanisms in each of the tasks. Accident mechanisms and tasks were identified by using those variables included in the European Statistics of Accidents at Work methodology. As main results, the estimated risk of the most frequent accident mechanisms identified for each of the analysed tasks is low and the only accident mechanisms with medium risk are accidents when lifting or pushing with physical stress on the musculoskeletal system in tasks involving carrying, and impacts against objects after slipping or stumbling for tasks involving movements. The prioritisation of public preventive actions for the accident mechanisms with a higher estimated risk is highly recommended.

Objective threshold for distinguishing complicated tasks

Energy Technology Data Exchange (ETDEWEB)

Park, Jin Kyun; Jung, Won Dea [KAERI, Daejeon (Korea, Republic of)

2014-08-15

Estimating the likelihood of human error in a reliable manner is really important for enhancing the safety of a large process control system such as Nuclear Power Plants (NPPs). In this regard, from the point of view of Probabilistic Safety Assessment (PSA), various kinds of Human Reliability Analysis (HRA) methods have been used for several decades in order to systematically evaluate the effect of human error on the safety of NPPs. However, one of the recurrence issues is to determine the level of an important Performance Shaping Factor (PSF) by using a clear and objective manner with respect to the context of a given task. Unfortunately, there is no such criterion for a certain PSF such as the complexity of a task. For this reason, in this study, an objective criterion that is helpful for identifying a complicated task is suggested based on the Task Complexity (TACOM) measure. To this end, subjective difficulty scores rated by high speed train drivers are collected. After that, subjective difficulty scores are compared with the associated TACOM scores being quantified based on tasks to be conducted by high speed train drivers. As a result, it is expected that high speed train drivers feel a significant difficulty when they are faced with tasks of which the TACOM scores are greater than 4.2. Since TACOM measure is a kind of general tool to quantify the complexity of tasks to be done by human operators, it is promising to conclude that this value can be regarded as a common threshold representing what a complicated task is.

Benefits of interhemispheric integration on the Japanese Kana script-matching tasks.

Science.gov (United States)

Yoshizaki, K; Tsuji, Y

2000-02-01

We tested Banich's hypothesis that the benefits of bihemispheric processing were enhanced as task complexity increased, when some procedural shortcomings in the previous studies were overcome by using Japanese Kana script-matching tasks. In Exp. 1, the 20 right-handed subjects were given the Physical-Identity task (Katakana-Katakana scripts matching) and the Name-Identity task (Katakana-Hiragana scripts matching). On both tasks, a pair of Kana scripts was tachistoscopically presented in the left, right, and bilateral visual fields. Distractor stimuli were also presented with target Kana scripts on both tasks to equate the processing load between the hemispheres. Analysis showed that, while a bilateral visual-field advantage was found on the name-identity task, a unilateral visual-field advantage was found on the physical-identity task, suggesting that, as the computational complexity of the encoding stage was enhanced, the benefits of bilateral hemispheric processing increased. In Exp. 2, the 16 right-handed subjects were given the same physical-identity task as in Exp. 1, except Hiragana scripts were used as distractors instead of digits to enhance task difficulty. Analysis showed no differences in performance between the unilateral and bilateral visual fields. Taking into account these results of physical-identity tasks for both Exps. 1 and 2, enhancing task demand in the stage of ignoring distractors made the unilateral visual-field advantage obtained in Exp. 1 disappear in Exp. 2. These results supported Banich's hypothesis.

Dynamics of the central bottleneck: dual-task and task uncertainty.

Directory of Open Access Journals (Sweden)

Mariano Sigman

2006-07-01

Full Text Available Why is the human brain fundamentally limited when attempting to execute two tasks at the same time or in close succession? Two classical paradigms, psychological refractory period (PRP and task switching, have independently approached this issue, making significant advances in our understanding of the architecture of cognition. Yet, there is an apparent contradiction between the conclusions derived from these two paradigms. The PRP paradigm, on the one hand, suggests that the simultaneous execution of two tasks is limited solely by a passive structural bottleneck in which the tasks are executed on a first-come, first-served basis. The task-switching paradigm, on the other hand, argues that switching back and forth between task configurations must be actively controlled by a central executive system (the system controlling voluntary, planned, and flexible action. Here we have explicitly designed an experiment mixing the essential ingredients of both paradigms: task uncertainty and task simultaneity. In addition to a central bottleneck, we obtain evidence for active processes of task setting (planning of the appropriate sequence of actions and task disengaging (suppression of the plan set for the first task in order to proceed with the next one. Our results clarify the chronometric relations between these central components of dual-task processing, and in particular whether they operate serially or in parallel. On this basis, we propose a hierarchical model of cognitive architecture that provides a synthesis of task-switching and PRP paradigms.

Advancing a new evidence-based professional in health care: job task analysis for health and wellness coaches.

Science.gov (United States)

Wolever, Ruth Q; Jordan, Meg; Lawson, Karen; Moore, Margaret

2016-06-27

The pressing need to manage burgeoning chronic disease has led to the emergence of job roles such as health and wellness coaches (HWCs). As use of this title has increased dramatically, so has the need to ensure consistency, quality and safety for health and wellness coaching (HWC) provided in both practice and research. Clear and uniform role definitions and competencies are required to ensure appropriate scope of practice, to allow best practices to emerge, and to support the implementation of well-designed, large scale studies to accumulate a rigorous evidence base. Since the nascent field is replete with heterogeneity in terms of role delineations and competencies, a collaborative volunteer non-profit organization, the National Consortium for Credentialing Health and Wellness Coaches (NCCHWC), has been built over the past six years to support professionalization of the field. In 2014, a professionally led Job Task Analysis (JTA) was conducted with 15 carefully selected subject matter experts (SMEs) with diverse education and professional backgrounds who were practicing HWC in a wide variety of settings. After establishing a thorough list of specific tasks employed during HWC, the expert panel discussed the knowledge and skills necessary to competently perform the tasks. Subsequently, a large validation survey assessed the relative importance and frequency of each identified job task in conducting HWC. The JTA identified 21 job tasks as essential to HWC. In the subsequent validation survey, 4026 practicing health and wellness coaches were invited to rate each of the 21 job tasks in terms of their importance and frequency. A response rate of 25.6 % provided a diverse sample (n = 1031) in terms of background, and represented a wide variety of training programs from academia, industry, the private sector and associations. Per best practices, the subset of practicing HWCs (n = 885) provided importance and frequency ratings to be used to calculate task and

The effects of stimulus modality and task integrality: Predicting dual-task performance and workload from single-task levels

Science.gov (United States)

Hart, S. G.; Shively, R. J.; Vidulich, M. A.; Miller, R. C.

1986-01-01

The influence of stimulus modality and task difficulty on workload and performance was investigated. The goal was to quantify the cost (in terms of response time and experienced workload) incurred when essentially serial task components shared common elements (e.g., the response to one initiated the other) which could be accomplished in parallel. The experimental tasks were based on the Fittsberg paradigm; the solution to a SternBERG-type memory task determines which of two identical FITTS targets are acquired. Previous research suggested that such functionally integrated dual tasks are performed with substantially less workload and faster response times than would be predicted by suming single-task components when both are presented in the same stimulus modality (visual). The physical integration of task elements was varied (although their functional relationship remained the same) to determine whether dual-task facilitation would persist if task components were presented in different sensory modalities. Again, it was found that the cost of performing the two-stage task was considerably less than the sum of component single-task levels when both were presented visually. Less facilitation was found when task elements were presented in different sensory modalities. These results suggest the importance of distinguishing between concurrent tasks that complete for limited resources from those that beneficially share common resources when selecting the stimulus modalities for information displays.

Orienting task effects on text recall in adulthood.

Science.gov (United States)

Simon, E W; Dixon, R A; Nowak, C A; Hultsch, D F

1982-09-01

This investigation examined the effects of orienting task-controlled processing on the text recall of younger (18 to 32 years), middle-aged (39 to 51 years), and older (59 to 76 years) adults. The participants were presented with a 500-word narrative text. Three groups performed orienting tasks (syntactic, stylistic, advice) within an incidental memory paradigm. A fourth group was asked for intentional recall. Analysis indicated a significant age by orienting task interaction. Younger adults recalled more propositions when recall was intentional or when it was preceded by a deep-orienting task than when it was preceded by a shallow-orienting task. Middle-aged and older adults recalled more propositions when recall was intentional than when it was incidental, regardless of the depth of the orienting task. There were no significant differences in intentional recall. In addition, a significant age x orienting task x propositional level interaction indicated that younger adults recalled more of the main ideas of the text following deep processing, whereas the middle-aged and older adults recalled more of these ideas following intentional processing.

Resolving task rule incongruence during task switching by competitor rule suppression.

Science.gov (United States)

Meiran, Nachshon; Hsieh, Shulan; Dimov, Eduard

2010-07-01

Task switching requires maintaining readiness to execute any task of a given set of tasks. However, when tasks switch, the readiness to execute the now-irrelevant task generates interference, as seen in the task rule incongruence effect. Overcoming such interference requires fine-tuned inhibition that impairs task readiness only minimally. In an experiment involving 2 object classification tasks and 2 location classification tasks, the authors show that irrelevant task rules that generate response conflicts are inhibited. This competitor rule suppression (CRS) is seen in response slowing in subsequent trials, when the competing rules become relevant. CRS is shown to operate on specific rules without affecting similar rules. CRS and backward inhibition, which is another inhibitory phenomenon, produced additive effects on reaction time, suggesting their mutual independence. Implications for current formal theories of task switching as well as for conflict monitoring theories are discussed. (c) 2010 APA, all rights reserved

Developmental changes in using verbal self-cueing in task-switching situations: the impact of task practice and task-sequencing demands

Science.gov (United States)

Kray, Jutta; Gaspard, Hanna; Karbach, Julia; Blaye, Agnès

2013-01-01

In this study we examined whether developmental changes in using verbal self-cueing for task-goal maintenance are dependent on the amount of task practice and task-sequencing demands. To measure task-goal maintenance we applied a switching paradigm in which children either performed only task A or B in single-task blocks or switched between them on every second trial in mixed-task blocks. Task-goal maintenance was determined by comparing the performance between both blocks (mixing costs). The influence of verbal self-cueing was measured by instructing children to either name the next task aloud or not to verbalize during task preparation. Task-sequencing demands were varied between groups whereas one group received spatial task cues to support keeping track of the task sequence, while the other group did not. We also varied by the amount of prior practice in task switching while one group of participants practiced task switching first, before performing the task naming in addition, and the other group did it vice versa. Results of our study investigating younger (8–10 years) and older children (11–13 years) revealed no age differences in beneficial effects of verbal self-cueing. In line with previous findings, children showed reduced mixing costs under task-naming instructions and under conditions of low task-sequence demands (with the presence of spatial task cues). Our results also indicated that these benefits were only obtained for those groups of children that first received practice in task switching alone with no additional verbalization instruction. These findings suggest that internal task-cueing strategies can be efficiently used in children but only if they received prior practice in the underlying task so that demands on keeping and coordinating various instructions are reduced. Moreover, children benefitted from spatial task cues for better task-goal maintenance only if no verbal task-cueing strategy was introduced first. PMID:24381566

Unnecessary work tasks and mental health: a prospective analysis of Danish human service workers.

Science.gov (United States)

Madsen, Ida E H; Tripathi, Manisha; Borritz, Marianne; Rugulies, Reiner

2014-11-01

According to the "stress-as-offense-to-self" perspective, work tasks that are considered unnecessary or unreasonable - so-called "illegitimate work tasks" - are likely to elicit stress-reactions. Previous studies, mostly cross-sectional, have shown that illegitimate tasks are associated with increased self-reported stress, cortisol, and counterproductive work behavior. In this article, we examine the prospective association between unnecessary work tasks, one type of illegitimate work tasks, and mental health among Danish human service workers. Further, we explore whether this association is modified by sex, age, occupational position, and baseline mental health status. The data were obtained from self-administered questionnaires from 1351 Danish human service workers in three waves of data-collection during 1999-2005. We measured unnecessary work tasks by a single item, and assessed mental health using the 5-item mental health inventory from the Short form 36 questionnaire. We analyzed data using multi-level modeling, adjusting for potential confounding by sex, age, cohabitation, occupational position, and baseline mental health. Unnecessary work tasks were prospectively associated with a decreased level of mental health. This association was stronger for employees with poor baseline mental health and tended to be more pronounced among older employees. Among participants with poor baseline mental health, the association was explained by neither psychological demands nor decision latitude. Our findings suggest that the prevention of unnecessary work tasks may benefit employee mental health, particularly among employees with pre-existing mental health problems.

Affordances and synchronization in collective creative construction tasks

DEFF Research Database (Denmark)

Tylén, Kristian; Fusaroli, Riccardo

What does it mean to cooperate? How do we share meanings and actions in order to reach a common goal? In this paper we explore the relation between cooperative coordination and heart rate. We argue that in cooperative contexts participants synchronize their heart rhythms according to two factors......: the affordances of the task at hand and the gradual consolidation of collaborative practices. Six groups of participants were instructed to construct LEGO models of six abstract notions (“responsibility”, “knowledge”, “justice” etc.), both individually and in groups. We combine video analysis and heart rate...... measurements and employ recurrence analysis techniques to quantify the mutual adaptability of heart rates among the participants in the different tasks. We show that during individual tasks individual heart rates synchronize both within and between groups (but not with controls) plausibly due...

The Relationships among Students' Future-Oriented Goals and Subgoals, Perceived Task Instrumentality, and Task-Oriented Self-Regulation Strategies in an Academic Environment

Science.gov (United States)

Tabachnick, Sharon E.; Miller, Raymond B.; Relyea, George E.

2008-01-01

The authors performed path analysis, followed by a bootstrap procedure, to test the predictions of a model explaining the relationships among students' distal future goals (both extrinsic and intrinsic), their adoption of a middle-range subgoal, their perceptions of task instrumentality, and their proximal task-oriented self-regulation strategies.…

Application of three-class ROC analysis to task-based image quality assessment of simultaneous dual-isotope myocardial perfusion SPECT (MPS).

Science.gov (United States)

He, Xin; Song, Xiyun; Frey, Eric C

2008-11-01

The diagnosis of cardiac disease using dual-isotope myocardial perfusion SPECT (MPS) is based on the defect status in both stress and rest images, and can be modeled as a three-class task of classifying patients as having no, reversible, or fixed perfusion defects. Simultaneous acquisition protocols for dual-isotope MPS imaging have gained much interest due to their advantages including perfect registration of the (201)Tl and (99m)Tc images in space and time, increased patient comfort, and higher clinical throughput. As a result of simultaneous acquisition, however, crosstalk contamination, where photons emitted by one isotope contribute to the image of the other isotope, degrades image quality. Minimizing the crosstalk is important in obtaining the best possible image quality. One way to minimize the crosstalk is to optimize the injected activity of the two isotopes by considering the three-class nature of the diagnostic problem. To effectively do so, we have previously developed a three-class receiver operating characteristic (ROC) analysis methodology that extends and unifies the decision theoretic, linear discriminant analysis, and psychophysical foundations of binary ROC analysis in a three-class paradigm. In this work, we applied the proposed three-class ROC methodology to the assessment of the image quality of simultaneous dual-isotope MPS imaging techniques and the determination of the optimal injected activity combination. In addition to this application, the rapid development of diagnostic imaging techniques has produced an increasing number of clinical diagnostic tasks that involve not only disease detection, but also disease characterization and are thus multiclass tasks. This paper provides a practical example of the application of the proposed three-class ROC analysis methodology to medical problems.

Revisiting corpus creation and analysis tools for translation tasks

Directory of Open Access Journals (Sweden)

Claudio Fantinuoli

2016-06-01

Full Text Available Many translation scholars have proposed the use of corpora to allow professional translators to produce high quality texts which read like originals. Yet, the diffusion of this methodology has been modest, one reason being the fact that software for corpora analyses have been developed with the linguist in mind, which means that they are generally complex and cumbersome, offering many advanced features, but lacking the level of usability and the specific features that meet translators’ needs. To overcome this shortcoming, we have developed TranslatorBank, a free corpus creation and analysis tool designed for translation tasks. TranslatorBank supports the creation of specialized monolingual corpora from the web; it includes a concordancer with a query system similar to a search engine; it uses basic statistical measures to indicate the reliability of results; it accesses the original documents directly for more contextual information; it includes a statistical and linguistic terminology extraction utility to extract the relevant terminology of the domain and the typical collocations of a given term. Designed to be easy and intuitive to use, the tool may help translation students as well as professionals to increase their translation quality by adhering to the specific linguistic variety of the target text corpus.

Revisiting corpus creation and analysis tools for translation tasks

Directory of Open Access Journals (Sweden)

Claudio Fantinuoli

2016-04-01

Many translation scholars have proposed the use of corpora to allow professional translators to produce high quality texts which read like originals. Yet, the diffusion of this methodology has been modest, one reason being the fact that software for corpora analyses have been developed with the linguist in mind, which means that they are generally complex and cumbersome, offering many advanced features, but lacking the level of usability and the specific features that meet translators’ needs. To overcome this shortcoming, we have developed TranslatorBank, a free corpus creation and analysis tool designed for translation tasks. TranslatorBank supports the creation of specialized monolingual corpora from the web; it includes a concordancer with a query system similar to a search engine; it uses basic statistical measures to indicate the reliability of results; it accesses the original documents directly for more contextual information; it includes a statistical and linguistic terminology extraction utility to extract the relevant terminology of the domain and the typical collocations of a given term. Designed to be easy and intuitive to use, the tool may help translation students as well as professionals to increase their translation quality by adhering to the specific linguistic variety of the target text corpus.

Default mode network connectivity during task execution.

Science.gov (United States)

Vatansever, D; Menon, D K; Manktelow, A E; Sahakian, B J; Stamatakis, E A

2015-11-15

Initially described as task-induced deactivations during goal-directed paradigms of high attentional load, the unresolved functionality of default mode regions has long been assumed to interfere with task performance. However, recent evidence suggests a potential default mode network involvement in fulfilling cognitive demands. We tested this hypothesis in a finger opposition paradigm with task and fixation periods which we compared with an independent resting state scan using functional magnetic resonance imaging and a comprehensive analysis pipeline including activation, functional connectivity, behavioural and graph theoretical assessments. The results indicate task specific changes in the default mode network topography. Behaviourally, we show that increased connectivity of the posterior cingulate cortex with the left superior frontal gyrus predicts faster reaction times. Moreover, interactive and dynamic reconfiguration of the default mode network regions' functional connections illustrates their involvement with the task at hand with higher-level global parallel processing power, yet preserved small-world architecture in comparison with rest. These findings demonstrate that the default mode network does not disengage during this paradigm, but instead may be involved in task relevant processing. Copyright © 2015 Elsevier Inc. All rights reserved.

A Content Analysis of General Chemistry Laboratory Manuals for Evidence of Higher-Order Cognitive Tasks

Science.gov (United States)

Domin, Daniel S.

1999-01-01

The science laboratory instructional environment is ideal for fostering the development of problem-solving, manipulative, and higher-order thinking skills: the skills needed by today's learner to compete in an ever increasing technology-based society. This paper reports the results of a content analysis of ten general chemistry laboratory manuals. Three experiments from each manual were examined for evidence of higher-order cognitive activities. Analysis was based upon the six major cognitive categories of Bloom's Taxonomy of Educational Objectives: knowledge, comprehension, application, analysis, synthesis, and evaluation. The results of this study show that the overwhelming majority of general chemistry laboratory manuals provide tasks that require the use of only the lower-order cognitive skills: knowledge, comprehension, and application. Two of the laboratory manuals were disparate in having activities that utilized higher-order cognition. I describe the instructional strategies used within these manuals to foster higher-order cognitive development.

Evaluation of OPPS model for plant operator's task simulation with Micro-SAINT

International Nuclear Information System (INIS)

Yoshida, Kazuo

1991-03-01

The development of a computer simulation method for cognitive behavior of operators under emergency conditions in nuclear power plant are being conducted at Japan Atomic Energy Research Institute (JAERI). As one of activities in this project, the task network modeling and simulation method has been evaluated with reproduced OPPS model using Micro-SAINT which is a PC software for task network analysis. OPPS is an operator's task simulation model developed by Oak Ridge National Laboratory. Operator's tasks under the condition of failure open of a safety relief valve in a BWR power plant has been analyzed as a sample problem with Micro-SAINT version of OPPS for the evaluation of task network analysis method. Furthermore, the fundamental capabilities of Micro-SAINT has been evaluated, and the task network in OPPS model has been also examined. As the results of this study, it has been clarified that random seed numbers in Micro-SAINT affect the probabilistic branching ratio and the distribution of task execution time calculated by Monte Carlo simulations, and the expression of network for a repeated task in the OPPS model leads to incorrect standard deviation in the case that a task execution time has some distribution. (author)

Transposition of Knowledge: Encountering Proportionality in an Algebra Task

Science.gov (United States)

Lundberg, Anna. L. V.; Kilhamn, Cecilia

2018-01-01

This article reports on an analysis of the process in which "knowledge to be taught" was transposed into "knowledge actually taught," concerning a task including proportional relationships in an algebra setting in a grade 6 classroom. We identified affordances and constraints of the task by describing the mathematical…

The data acquisition tasks for TASSO. User manual

International Nuclear Information System (INIS)

Quarrie, D.R.

1981-07-01

The TASSO Data Acquisition System is designed to accept events from various trigger sources at rates of several Hz and to transfer these events to the central DESY IBM Triplex for later offline analysis. A NORD 10S computer is used for this purpose with several data acquisition tasks running under control of a Supervisor task DASSO that is described elsewhere. (author)

A Cognitive Analysis of Armor Procedural Task Training

Science.gov (United States)

1982-03-01

Verbal Behavior, 8, 323-343. Craik , F. I. M., & Lockhart , R. S. (1972). Levels of processing : A framework for memory research. Journal of Verbal Learning...concep- tual or meaningful) coding of the task to be learned (e.g., Bjork, 1975; Craik & Lockhart , 1972; Melton & Martin, 1972). In order to remember a...were several serious problems with applying this approach in the context of entry- level military training. In particular, the soldier did not always

Implementation of Hierarchical Task Analysis for User Interface Design in Drawing Application for Early Childhood Education

Directory of Open Access Journals (Sweden)

Mira Kania Sabariah

2016-05-01

Full Text Available Draw learning in early childhood is an important lesson and full of stimulation of the process of growth and development of children which could help to train the fine motor skills. We have had a lot of applications that can be used to perform learning, including interactive learning applications. Referring to the observations that have been conducted showed that the experiences given by the applications that exist today are very diverse and have not been able to represent the model of learning and characteristics of early childhood (4-6 years. Based on the results, Hierarchical Task Analysis method generated a list of tasks that must be done in designing an user interface that represents the user experience in draw learning. Then by using the Heuristic Evaluation method the usability of the model has fulfilled a very good level of understanding and also it can be enhanced and produce a better model.

System and method for seamless task-directed autonomy for robots

Science.gov (United States)

Nielsen, Curtis; Bruemmer, David; Few, Douglas; Walton, Miles

2012-09-18

Systems, methods, and user interfaces are used for controlling a robot. An environment map and a robot designator are presented to a user. The user may place, move, and modify task designators on the environment map. The task designators indicate a position in the environment map and indicate a task for the robot to achieve. A control intermediary links task designators with robot instructions issued to the robot. The control intermediary analyzes a relative position between the task designators and the robot. The control intermediary uses the analysis to determine a task-oriented autonomy level for the robot and communicates target achievement information to the robot. The target achievement information may include instructions for directly guiding the robot if the task-oriented autonomy level indicates low robot initiative and may include instructions for directing the robot to determine a robot plan for achieving the task if the task-oriented autonomy level indicates high robot initiative.

Contaminated sediment research task: SHC Task 3.61.3

Science.gov (United States)

A poster presentation for the SHC BOSC review will summarize the research efforts under Sustainable and Healthy Communities Research Program (SHC) in the Contaminated Sediment Task within the Contaminated Sites Project. For the Task, Problem Summary & Decision Context; Task O...

Consistency of performance of robot-assisted surgical tasks in virtual reality.

Science.gov (United States)

Suh, I H; Siu, K-C; Mukherjee, M; Monk, E; Oleynikov, D; Stergiou, N

2009-01-01

The purpose of this study was to investigate consistency of performance of robot-assisted surgical tasks in a virtual reality environment. Eight subjects performed two surgical tasks, bimanual carrying and needle passing, with both the da Vinci surgical robot and a virtual reality equivalent environment. Nonlinear analysis was utilized to evaluate consistency of performance by calculating the regularity and the amount of divergence in the movement trajectories of the surgical instrument tips. Our results revealed that movement patterns for both training tasks were statistically similar between the two environments. Consistency of performance as measured by nonlinear analysis could be an appropriate methodology to evaluate the complexity of the training tasks between actual and virtual environments and assist in developing better surgical training programs.

Strategic predictors of performance in a divided attention task

Science.gov (United States)

Faragó, Kinga Bettina; Lőrincz, András

2018-01-01

In this study we investigate the strategies of subjects in a complex divided attention task. We conducted a series of experiments with ten participants and evaluated their performance. After an extensive analysis, we identified four strategic measures that justify the achievement of the participants, by highlighting the individual differences and predicting performance in a regression analysis using generalized estimating equations. Selecting the more urgent task and user action between multiple simultaneous possibilities form two of the strategic decisions, respectively. The third one refers to choosing a response within the same task when the opportunity is present. The fourth and most important measure of strategy involves thinking ahead and executing an action before a situation would become critical. This latter one has the effect of reducing later cognitive load or timing constraints and it is shown to explain almost as much variance in performance as the other three, more straightforward predictors together. In addition to determining these strategic predictors, we also show how manipulating task difficulty induces a shift in strategy, thus impairing human performance in the rehearsed task. The results of this study indicate that considerable differences in the divided attention ability of normal subjects can be identified early and with simple measurements. The importance of describing and analyzing strategies is also emphasized, which can substantially influence performance in complex tasks and may serve training needs. PMID:29621292

Strategic predictors of performance in a divided attention task.

Directory of Open Access Journals (Sweden)

Róbert Adrian Rill

Full Text Available In this study we investigate the strategies of subjects in a complex divided attention task. We conducted a series of experiments with ten participants and evaluated their performance. After an extensive analysis, we identified four strategic measures that justify the achievement of the participants, by highlighting the individual differences and predicting performance in a regression analysis using generalized estimating equations. Selecting the more urgent task and user action between multiple simultaneous possibilities form two of the strategic decisions, respectively. The third one refers to choosing a response within the same task when the opportunity is present. The fourth and most important measure of strategy involves thinking ahead and executing an action before a situation would become critical. This latter one has the effect of reducing later cognitive load or timing constraints and it is shown to explain almost as much variance in performance as the other three, more straightforward predictors together. In addition to determining these strategic predictors, we also show how manipulating task difficulty induces a shift in strategy, thus impairing human performance in the rehearsed task. The results of this study indicate that considerable differences in the divided attention ability of normal subjects can be identified early and with simple measurements. The importance of describing and analyzing strategies is also emphasized, which can substantially influence performance in complex tasks and may serve training needs.

Strategic predictors of performance in a divided attention task.

Science.gov (United States)

Rill, Róbert Adrian; Faragó, Kinga Bettina; Lőrincz, András

2018-01-01

In this study we investigate the strategies of subjects in a complex divided attention task. We conducted a series of experiments with ten participants and evaluated their performance. After an extensive analysis, we identified four strategic measures that justify the achievement of the participants, by highlighting the individual differences and predicting performance in a regression analysis using generalized estimating equations. Selecting the more urgent task and user action between multiple simultaneous possibilities form two of the strategic decisions, respectively. The third one refers to choosing a response within the same task when the opportunity is present. The fourth and most important measure of strategy involves thinking ahead and executing an action before a situation would become critical. This latter one has the effect of reducing later cognitive load or timing constraints and it is shown to explain almost as much variance in performance as the other three, more straightforward predictors together. In addition to determining these strategic predictors, we also show how manipulating task difficulty induces a shift in strategy, thus impairing human performance in the rehearsed task. The results of this study indicate that considerable differences in the divided attention ability of normal subjects can be identified early and with simple measurements. The importance of describing and analyzing strategies is also emphasized, which can substantially influence performance in complex tasks and may serve training needs.

Constructing experimental designs for discrete-choice experiments: report of the ISPOR Conjoint Analysis Experimental Design Good Research Practices Task Force.

Science.gov (United States)

Reed Johnson, F; Lancsar, Emily; Marshall, Deborah; Kilambi, Vikram; Mühlbacher, Axel; Regier, Dean A; Bresnahan, Brian W; Kanninen, Barbara; Bridges, John F P

2013-01-01

Stated-preference methods are a class of evaluation techniques for studying the preferences of patients and other stakeholders. While these methods span a variety of techniques, conjoint-analysis methods-and particularly discrete-choice experiments (DCEs)-have become the most frequently applied approach in health care in recent years. Experimental design is an important stage in the development of such methods, but establishing a consensus on standards is hampered by lack of understanding of available techniques and software. This report builds on the previous ISPOR Conjoint Analysis Task Force Report: Conjoint Analysis Applications in Health-A Checklist: A Report of the ISPOR Good Research Practices for Conjoint Analysis Task Force. This report aims to assist researchers specifically in evaluating alternative approaches to experimental design, a difficult and important element of successful DCEs. While this report does not endorse any specific approach, it does provide a guide for choosing an approach that is appropriate for a particular study. In particular, it provides an overview of the role of experimental designs for the successful implementation of the DCE approach in health care studies, and it provides researchers with an introduction to constructing experimental designs on the basis of study objectives and the statistical model researchers have selected for the study. The report outlines the theoretical requirements for designs that identify choice-model preference parameters and summarizes and compares a number of available approaches for constructing experimental designs. The task-force leadership group met via bimonthly teleconferences and in person at ISPOR meetings in the United States and Europe. An international group of experimental-design experts was consulted during this process to discuss existing approaches for experimental design and to review the task force's draft reports. In addition, ISPOR members contributed to developing a consensus

Cost-effectiveness analysis alongside clinical trials II-An ISPOR Good Research Practices Task Force report.

Science.gov (United States)

Ramsey, Scott D; Willke, Richard J; Glick, Henry; Reed, Shelby D; Augustovski, Federico; Jonsson, Bengt; Briggs, Andrew; Sullivan, Sean D

2015-03-01

Clinical trials evaluating medicines, medical devices, and procedures now commonly assess the economic value of these interventions. The growing number of prospective clinical/economic trials reflects both widespread interest in economic information for new technologies and the regulatory and reimbursement requirements of many countries that now consider evidence of economic value along with clinical efficacy. As decision makers increasingly demand evidence of economic value for health care interventions, conducting high-quality economic analyses alongside clinical studies is desirable because they broaden the scope of information available on a particular intervention, and can efficiently provide timely information with high internal and, when designed and analyzed properly, reasonable external validity. In 2005, ISPOR published the Good Research Practices for Cost-Effectiveness Analysis Alongside Clinical Trials: The ISPOR RCT-CEA Task Force report. ISPOR initiated an update of the report in 2014 to include the methodological developments over the last 9 years. This report provides updated recommendations reflecting advances in several areas related to trial design, selecting data elements, database design and management, analysis, and reporting of results. Task force members note that trials should be designed to evaluate effectiveness (rather than efficacy) when possible, should include clinical outcome measures, and should obtain health resource use and health state utilities directly from study subjects. Collection of economic data should be fully integrated into the study. An incremental analysis should be conducted with an intention-to-treat approach, complemented by relevant subgroup analyses. Uncertainty should be characterized. Articles should adhere to established standards for reporting results of cost-effectiveness analyses. Economic studies alongside trials are complementary to other evaluations (e.g., modeling studies) as information for decision

Dependency of human target detection performance on clutter and quality of supporting image analysis algorithms in a video surveillance task

Science.gov (United States)

Huber, Samuel; Dunau, Patrick; Wellig, Peter; Stein, Karin

2017-10-01

Background: In target detection, the success rates depend strongly on human observer performances. Two prior studies tested the contributions of target detection algorithms and prior training sessions. The aim of this Swiss-German cooperation study was to evaluate the dependency of human observer performance on the quality of supporting image analysis algorithms. Methods: The participants were presented 15 different video sequences. Their task was to detect all targets in the shortest possible time. Each video sequence showed a heavily cluttered simulated public area from a different viewing angle. In each video sequence, the number of avatars in the area was altered to 100, 150 and 200 subjects. The number of targets appearing was kept at 10%. The number of marked targets varied from 0, 5, 10, 20 up to 40 marked subjects while keeping the positive predictive value of the detection algorithm at 20%. During the task, workload level was assessed by applying an acoustic secondary task. Detection rates and detection times for the targets were analyzed using inferential statistics. Results: The study found Target Detection Time to increase and Target Detection Rates to decrease with increasing numbers of avatars. The same is true for the Secondary Task Reaction Time while there was no effect on Secondary Task Hit Rate. Furthermore, we found a trend for a u-shaped correlation between the numbers of markings and RTST indicating increased workload. Conclusion: The trial results may indicate useful criteria for the design of training and support of observers in observational tasks.

Reward Motivation Enhances Task Coding in Frontoparietal Cortex.

Science.gov (United States)

Etzel, Joset A; Cole, Michael W; Zacks, Jeffrey M; Kay, Kendrick N; Braver, Todd S

2016-04-01

Reward motivation often enhances task performance, but the neural mechanisms underlying such cognitive enhancement remain unclear. Here, we used a multivariate pattern analysis (MVPA) approach to test the hypothesis that motivation-related enhancement of cognitive control results from improved encoding and representation of task set information. Participants underwent two fMRI sessions of cued task switching, the first under baseline conditions, and the second with randomly intermixed reward incentive and no-incentive trials. Information about the upcoming task could be successfully decoded from cue-related activation patterns in a set of frontoparietal regions typically associated with task control. More critically, MVPA classifiers trained on the baseline session had significantly higher decoding accuracy on incentive than non-incentive trials, with decoding improvement mediating reward-related enhancement of behavioral performance. These results strongly support the hypothesis that reward motivation enhances cognitive control, by improving the discriminability of task-relevant information coded and maintained in frontoparietal brain regions. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Self-Controlled Feedback for a Complex Motor Task

Directory of Open Access Journals (Sweden)

Wolf Peter

2011-12-01

Full Text Available Self-controlled augmented feedback enhances learning of simple motor tasks. Thereby, learners tend to request feedback after trials that were rated as good by themselves. Feedback after good trials promotes positive reinforcement, which enhances motor learning. The goal of this study was to investigate when naïve learners request terminal visual feedback in a complex motor task, as conclusions drawn on simple tasks can hardly be transferred to complex tasks. Indeed, seven of nine learners stated to have intended to request feedback predominantly after good trials, but in contrast to their intention, kinematic analysis showed that feedback was rather requested randomly (23% after good, 44% after intermediate, 33% after bad trials. Moreover, requesting feedback after good trials did not correlate with learning success. It seems that self-estimation of performance in complex tasks is challenging. As a consequence, learners might have focused on certain movement aspects rather than on the overall movement. Further studies should assess the current focus of the learner in detail to gain more insight in self-estimation capabilities during complex motor task learning.

Analysis of the operator's tasks: An aid to control room design

International Nuclear Information System (INIS)

Blanc, P.; Guesnier, G.P.; Heilbronn, B.; Monnier, B.

1983-01-01

The control room designer usually has no knowledge of the tasks performed by the operator in the control room since an overall picture of the situation only becomes available once the whole facility has been constructed. In order to study and design control rooms for its future PWR units, Electricite de France (EDF) felt it was essential to analyse these tasks: the work was facilitated by the existence of 900 MW PWR units which were already in operation and which are controlled in much the same manner as future units of the same type. Accordingly, by analysing the control procedures of these 900 MW PWR units, a data base describing the control and monitoring tasks performed by operators in normal, incident and accident situations has been built up. The data-base files, which were established from a study of 130 control procedures, record all the commands given and data available in the control room (about 7000), describe the tasks connected with these commands and data, and identify the times at which they are made use of by the operator. Using this data base, the principle of operator-system communication and of data processing in the control room of the future has been established: in such a control room, most controls and data will be accessible through computer communication systems to ensure that control and monitoring systems are closely integrated under normal operating conditions as well as in incident and post-accident situations and to enable the plant to be controlled by one or two operators in a seated position. (author)

Analysis of brain activity and response to colour stimuli during learning tasks: an EEG study

Science.gov (United States)

Folgieri, Raffaella; Lucchiari, Claudio; Marini, Daniele

2013-02-01

The research project intends to demonstrate how EEG detection through BCI device can improve the analysis and the interpretation of colours-driven cognitive processes through the combined approach of cognitive science and information technology methods. To this end, firstly it was decided to design an experiment based on comparing the results of the traditional (qualitative and quantitative) cognitive analysis approach with the EEG signal analysis of the evoked potentials. In our case, the sensorial stimulus is represented by the colours, while the cognitive task consists in remembering the words appearing on the screen, with different combination of foreground (words) and background colours. In this work we analysed data collected from a sample of students involved in a learning process during which they received visual stimuli based on colour variation. The stimuli concerned both the background of the text to learn and the colour of the characters. The experiment indicated some interesting results concerning the use of primary (RGB) and complementary (CMY) colours.

Using Task-based Materials in Teaching Writing for EFL Classes in Indonesia

Directory of Open Access Journals (Sweden)

Hanna Sundari

2018-05-01

Full Text Available Task-based language teaching has been widely used for language classroom. Using tasks as main activities, task-based materials was developed particularly for writing class. This article is intended to present the study of effectiveness of task-based materials in improving writing class for university. To accommodate the research purposes, mixed method approach was carried out by using quasi experimental research and content analysis of sentence complexity. The respondents were 210 students from writing classes as experiment and control with writing test as instrument. The results of data analysis showed that there were significant differences of writing skill to those who taught using developed task-based materials. Despite the fact that the score did not significantly differ on the aspect of writing mechanics, a developed task-based material has been proved to improve students’ writing skill in the aspect of format, content, organization and grammar. Moreover, the levels of lexical complexity and accuracy from the students whose materials use task-based design are higher than those who do not use it. Then, it can be drawn a conclusion that the use of developed task-based materials brings significant effects toward writing performance.

Relationship of Level of Functioning of Institutionalized Women on a Task Analysis of Personal Care for Menstruation and the Adaptive Behavior Scale.

Science.gov (United States)

Brekke, Beverly W.; And Others

A 40-item behavior analysis task, the Menstrual Care Scale, was developed and tested with 75 randomly selected institutionalized severely retarded women (13-59 years old). The need for developing personal care skills in menstruation habits had been identified as a priority area for sexuality instruction by staff and confirmed by analysis of…

Task analysis and structure scheme for center manager station in large container inspection system

International Nuclear Information System (INIS)

Li Zheng; Gao Wenhuan; Wang Jingjin; Kang Kejun; Chen Zhiqiang

1997-01-01

LCIS works as follows: the accelerator generates beam pulses which are formed into fan shape; the scanning system drags a lorry with a container passing through the beam in constant speed; the detector array detects the beam penetrating the lorry; the projection data acquisition system reads the projections and completes an inspection image of the lorry. All these works are controlled and synchronized by the center manage station. The author will describe the process of the projection data acquisition in scanning mode and the methods of real-time projection data processing. the task analysis and the structure scheme of center manager station is presented

Job task characteristics of Australian emergency services volunteers during search and rescue operations.

Science.gov (United States)

Silk, Aaron; Lenton, Gavin; Savage, Robbie; Aisbett, Brad

2018-02-01

Search and rescue operations are necessary in locating, assisting and recovering individuals lost or in distress. In Australia, land-based search and rescue roles require a range of physically demanding tasks undertaken in dynamic and challenging environments. The aim of the current research was to identify and characterise the physically demanding tasks inherent to search and rescue operation personnel within Australia. These aims were met through a subjective job task analysis approach. In total, 11 criterion tasks were identified by personnel. These tasks were the most physically demanding, frequently occurring and operationally important tasks to these specialist roles. Muscular strength was the dominant fitness component for 7 of the 11 tasks. In addition to the discrete criterion tasks, an operational scenario was established. With the tasks and operational scenario identified, objective task analysis procedures can be undertaken so that practitioners can implement evidence-based strategies, such as physical selection procedures and task-based physical training programs, commensurate with the physical demands of search and rescue job roles. Practitioner Summary: The identification of physically demanding tasks amongst specialist emergency service roles predicates health and safety strategies which can be incorporated into organisations. Knowledge of physical task parameters allows employers to mitigate injury risk through the implementation of strategies modelled on the precise physical demands of the role.

Factor analysis for imperfect maintenance planning at nuclear power plants by cognitive task analysis

International Nuclear Information System (INIS)

Takagawa, Kenichi; Iida, Hiroyasu

2011-01-01

Imperfect maintenance planning was frequently identified in domestic nuclear power plants. To prevent such an event, we analyzed causal factors in maintenance planning stages and showed the directionality of countermeasures in this study. There is a pragmatic limit in finding the causal factors from the items based on report descriptions. Therefore, the idea of the systemic accident model, which is used to monitor the performance variability in normal circumstances, is taken as a new concept instead of investigating negative factors. As an actual method for analyzing usual activities, cognitive task analysis (CTA) was applied. Persons who experienced various maintenance activities at one electric power company were interviewed about sources related to decision making during maintenance planning, and then usual factors affecting planning were extracted as performance variability factors. The tendency of domestic events was analyzed using the classification item of those factors, and the directionality of countermeasures was shown. The following are critical for preventing imperfect maintenance planning: the persons in charge should fully understand the situation of the equipment for which they are responsible in the work planning and maintenance evaluation stages, and they should definitely understand, for example, the maintenance bases of that equipment. (author)

Reverse control for humanoid robot task recognition.

Science.gov (United States)

Hak, Sovannara; Mansard, Nicolas; Stasse, Olivier; Laumond, Jean Paul

2012-12-01

Efficient methods to perform motion recognition have been developed using statistical tools. Those methods rely on primitive learning in a suitable space, for example, the latent space of the joint angle and/or adequate task spaces. Learned primitives are often sequential: A motion is segmented according to the time axis. When working with a humanoid robot, a motion can be decomposed into parallel subtasks. For example, in a waiter scenario, the robot has to keep some plates horizontal with one of its arms while placing a plate on the table with its free hand. Recognition can thus not be limited to one task per consecutive segment of time. The method presented in this paper takes advantage of the knowledge of what tasks the robot is able to do and how the motion is generated from this set of known controllers, to perform a reverse engineering of an observed motion. This analysis is intended to recognize parallel tasks that have been used to generate a motion. The method relies on the task-function formalism and the projection operation into the null space of a task to decouple the controllers. The approach is successfully applied on a real robot to disambiguate motion in different scenarios where two motions look similar but have different purposes.

Space Station data system analysis/architecture study. Task 1: Functional requirements definition, DR-5

Science.gov (United States)

1985-01-01

The initial task in the Space Station Data System (SSDS) Analysis/Architecture Study is the definition of the functional and key performance requirements for the SSDS. The SSDS is the set of hardware and software, both on the ground and in space, that provides the basic data management services for Space Station customers and systems. The primary purpose of the requirements development activity was to provide a coordinated, documented requirements set as a basis for the system definition of the SSDS and for other subsequent study activities. These requirements should also prove useful to other Space Station activities in that they provide an indication of the scope of the information services and systems that will be needed in the Space Station program. The major results of the requirements development task are as follows: (1) identification of a conceptual topology and architecture for the end-to-end Space Station Information Systems (SSIS); (2) development of a complete set of functional requirements and design drivers for the SSIS; (3) development of functional requirements and key performance requirements for the Space Station Data System (SSDS); and (4) definition of an operating concept for the SSIS. The operating concept was developed both from a Space Station payload customer and operator perspective in order to allow a requirements practicality assessment.

[Developmental changes in reading ability of Japanese elementary school children--analysis of 4 kana reading tasks].

Science.gov (United States)

Kobayashi, Tomoka; Inagaki, Masumi; Gunji, Atsuko; Yatabe, Kiyomi; Kaga, Makiko; Goto, Takaaki; Koike, Toshihide; Wakamiya, Eiji; Koeda, Tatsuya

2010-01-01

Five hundred and twenty-eight Japanese elementary school children aged from 6 (Grade 1) to 12 (Grade 6) were tested for their abilities to read Hiragana characters, words, and short sentences. They were typically developing children whom the classroom teachers judged to have no problems with reading and writing in Japanese. Each child was asked to read four tasks which were written in Hiragana script: single mora reading task, four syllable non-word reading task, four syllable word reading task, and short sentence reading task. The total articulation time for reading and performance in terms of accuracy were measured for each task. Developmental changes in these variables were evaluated. The articulation time was significantly longer for the first graders, and it gradually shortened as they moved through to the upper grades in all tasks. The articulation time reached a plateau in the 4th grade for the four syllable word and short sentence reading tasks, while it did so for the single mora and four syllable non-word reading tasks in the 5th grade. The articulation times for the four syllable word and short sentence reading tasks correlated strongly. There were very few clear errors for all tasks, and the number of such errors significantly changed between the school grades only for the single mora and four syllable word reading tasks. It was noted that more than half of the children read the beginning portion of the word or phrase twice or more, in order to read it accurately, and developmental changes were also seen in this pattern of reading. This study revealed that the combination of these reading tasks may function as a screening test for reading disorders such as developmental dyslexia in children below the age of ten or eleven years old.

Task Management in the New ATLAS Production System

CERN Document Server

De, K; The ATLAS collaboration; Klimentov, A; Potekhin, M; Vaniachine, A

2013-01-01

The ATLAS Production System is the top level workflow manager which translates physicists' needs for production level processing into actual workflows executed across about a hundred processing sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. Providing a front-end and a management layer for petascale data processing and analysis, the new Production System contains generic subsystems that can be used in a wider range of applications. The main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, the DEFT subsystem manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. Th...

Task Management in the New ATLAS Production System

CERN Document Server

De, K; The ATLAS collaboration; Klimentov, A; Potekhin, M; Vaniachine, A

2014-01-01

The ATLAS Production System is the top level workflow manager which translates physicists' needs for production level processing into actual workflows executed across about a hundred processing sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. Providing a front-end and a management layer for petascale data processing and analysis, the new Production System contains generic subsystems that can be used in a wider range of applications. The main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, the DEFT subsystem manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. Th...

Design study of wind turbines 50 kW to 3000 kW for electric utility applications. Volume 3: Supplementary design and analysis tasks

Science.gov (United States)

1976-01-01

Additional design and analysis data are provided to supplement the results of the two parallel design study efforts. The key results of the three supplemental tasks investigated are: (1) The velocity duration profile has a significant effect in determining the optimum wind turbine design parameters and the energy generation cost. (2) Modest increases in capacity factor can be achieved with small increases in energy generation costs and capital costs. (3) Reinforced concrete towers that are esthetically attractive can be designed and built at a cost comparable to those for steel truss towers. The approach used, method of analysis, assumptions made, design requirements, and the results for each task are discussed in detail.

Selecting Tasks for Evaluating Human Performance as a Function of Gravity

Science.gov (United States)

Norcross, Jason R.; Gernhardt, Michael L.

2011-01-01

A challenge in understanding human performance as a function of gravity is determining which tasks to research. Initial studies began with treadmill walking, which was easy to quantify and control. However, with the development of pressurized rovers, it is less important to optimize human performance for ambulation as pressurized rovers will likely perform gross translation for them. Future crews are likely to spend much of their extravehicular activity (EVA) performing geology, construction,a nd maintenance type tasks. With these types of tasks, people have different performance strategies, and it is often difficult to quantify the task and measure steady-state metabolic rates or perform biomechanical analysis. For many of these types of tasks, subjective feedback may be the only data that can be collected. However, subjective data may not fully support a rigorous scientific comparison of human performance across different gravity levels and suit factors. NASA would benefit from having a wide variety of quantifiable tasks that allow human performance comparison across different conditions. In order to determine which tasks will effectively support scientific studies, many different tasks and data analysis techniques will need to be employed. Many of these tasks and techniques will not be effective, but some will produce quantifiable results that are sensitive enough to show performance differences. One of the primary concerns related to EVA performance is metabolic rate. The higher the metabolic rate, the faster the astronaut will exhaust consumables. The focus of this poster will be on how different tasks affect metabolic rate across different gravity levels.

Proceedings of the Task 2 workshop Waste Isolation Safety Assessment Program

International Nuclear Information System (INIS)

Bradley, D.J.

1979-01-01

The reports from the workshop on waste form release rate analysis are presented. The workshop started with overview presentations on the Office of Nuclear Waste Isolation (ONWI), the Waste Isolation Safety Assessment Program (WISAP), WISAP Task 2 (Waste Form Release Rate Analysis), and WISAP Task 4 (Sorption/Desorption Analysis). Technical presentations followed in these areas: leaching studies on spent fuels, leaching studies on high-level waste glass, waste form surface science experiments, radiation effects, and leach modeling. Separate abstracts were prepared for each

Proceedings of the Task 2 workshop Waste Isolation Safety Assessment Program

Energy Technology Data Exchange (ETDEWEB)

Bradley, D.J.

1979-01-01

The reports from the workshop on waste form release rate analysis are presented. The workshop started with overview presentations on the Office of Nuclear Waste Isolation (ONWI), the Waste Isolation Safety Assessment Program (WISAP), WISAP Task 2 (Waste Form Release Rate Analysis), and WISAP Task 4 (Sorption/Desorption Analysis). Technical presentations followed in these areas: leaching studies on spent fuels, leaching studies on high-level waste glass, waste form surface science experiments, radiation effects, and leach modeling. Separate abstracts were prepared for each.

Applying Hierarchical Task Analysis Method to Discovery Layer Evaluation

Directory of Open Access Journals (Sweden)

Marlen Promann

2015-03-01

Full Text Available Libraries are implementing discovery layers to offer better user experiences. While usability tests have been helpful in evaluating the success or failure of implementing discovery layers in the library context, the focus has remained on its relative interface benefits over the traditional federated search. The informal site- and context specific usability tests have offered little to test the rigor of the discovery layers against the user goals, motivations and workflow they have been designed to support. This study proposes hierarchical task analysis (HTA as an important complementary evaluation method to usability testing of discovery layers. Relevant literature is reviewed for the discovery layers and the HTA method. As no previous application of HTA to the evaluation of discovery layers was found, this paper presents the application of HTA as an expert based and workflow centered (e.g. retrieving a relevant book or a journal article method to evaluating discovery layers. Purdue University’s Primo by Ex Libris was used to map eleven use cases as HTA charts. Nielsen’s Goal Composition theory was used as an analytical framework to evaluate the goal carts from two perspectives: a users’ physical interactions (i.e. clicks, and b user’s cognitive steps (i.e. decision points for what to do next. A brief comparison of HTA and usability test findings is offered as a way of conclusion.

Task conflicts and exclusive professionalism in nursing in South Korea.

Science.gov (United States)

Jung, Minsoo

2014-01-01

Task conflicts among medical professions are essential problems to be solved in health care organizations. This study examined job conflicts between practical nurses (PNs) and registered nurses (RNs) in their duties and tasks with representative panelists from South Korea. This qualitative study used the Dacum Task Analysis process. Subject-matter experts in practical nursing were recruited utilizing stratified sampling: Ten experts developed job descriptions of PNs, and 20 validated the descriptions. The on-site tasks and duties of the PNs were measured by means of Dacum, and the results were reviewed by RNs using 3 focus-group interviews. The job description of PNs consisted of 10 duties and 117 tasks, overlapping with some tasks of RNs. Core tasks performed by PNs, such as invasive activities, led to task conflicts between the 2 groups, as these activities were regarded as the inherent duty of nursing professions. Thus, the RNs did not concede the expanded job scope of the PNs in terms of exclusive professionalism. To reduce task conflict, there is a need for the balanced development of nursing professionalism.

Development and application of a new tool in driver task analysis; Entwicklung und Anwendung einer neuen Methodik zur Fahreraufgabenanalyse

Energy Technology Data Exchange (ETDEWEB)

Fastenmeier, W.; Gstalter, H. [mensch-verkehr-umwelt Institut fuer Angewandte Psychologie, Muenchen (Germany)

2003-07-01

A framework for driver task analysis is derived from a model of the drivers information processing. The first step of the procedure (SAFE) is to divide a given driving task (e.g. left turning in a signalised intersection of a certain type) into subtasks. These subtasks are appointed to defined stretches of the road and the time structure of the subtasks is determined. For each subtask an analysis format is used, that organizes different requirements into perception, expectation, judgement, memory, decision and driver action. In a next step, typical driver errors are appointed to the subtasks. Afterwards the information gathered in the analysis procedure is compressed to ratings of the complexity and risk included in each subtask. After the crucial subtasks of a driving task have been determined, a list of those requirements that led to that rating can be compiled. These lists give the potential for aiding the driver e.g. by use of driver assistance systems. (orig.) [German] In den Verkehrswissenschaften existieren bislang keine verkehrsspezifischen Standardverfahren, die eine Anforderungsanalyse auf der Ebene der Fahraufgaben erlauben. Dieser Beitrag stellt die Grundzuege eines Verfahrens zur Fahraufgabenanalyse dar (SAFE: Situative Anforderungsanalyse von Fahraufgaben). Es basiert auf einer Modellvorstellung zu den Informationsverarbeitungsprozessen, die waehrend der Bewaeltigung der Fahraufgabe eine Rolle spielen. Der erste Schritt der Aufgabenanalyse besteht darin, eine ausgewaehlte Fahraufgabe (z.B. Linksabbiegen in einer ampelgeregelten Kreuzung bestimmten Typs) in Teilaufgaben zu zerlegen und eine zeitliche Strukturierung dieser Teilaufgaben vorzunehmen. Diese werden raeumlichen Segmenten zugeordnet, die nacheinander durchfahren werden muessen. Fuer jede Teilaufgabe erfolgt dann die eigentliche Anforderungsanalyse, die nach den Kapiteln Wahrnehmung, Erwartungsbildung, Beurteilung, Gedaechtnisprozesse, Entscheidung/Planung sowie Fahrzeugbedienung mit jeweils

Obtaining Content Weights for Test Specifications from Job Analysis Task Surveys: An Application of the Many-Facets Rasch Model

Science.gov (United States)

Wang, Ning; Stahl, John

2012-01-01

This article discusses the use of the Many-Facets Rasch Model, via the FACETS computer program (Linacre, 2006a), to scale job/practice analysis survey data as well as to combine multiple rating scales into single composite weights representing the tasks' relative importance. Results from the Many-Facets Rasch Model are compared with those…

Diverse task scheduling for individualized requirements in cloud manufacturing

Science.gov (United States)

Zhou, Longfei; Zhang, Lin; Zhao, Chun; Laili, Yuanjun; Xu, Lida

2018-03-01

Cloud manufacturing (CMfg) has emerged as a new manufacturing paradigm that provides ubiquitous, on-demand manufacturing services to customers through network and CMfg platforms. In CMfg system, task scheduling as an important means of finding suitable services for specific manufacturing tasks plays a key role in enhancing the system performance. Customers' requirements in CMfg are highly individualized, which leads to diverse manufacturing tasks in terms of execution flows and users' preferences. We focus on diverse manufacturing tasks and aim to address their scheduling issue in CMfg. First of all, a mathematical model of task scheduling is built based on analysis of the scheduling process in CMfg. To solve this scheduling problem, we propose a scheduling method aiming for diverse tasks, which enables each service demander to obtain desired manufacturing services. The candidate service sets are generated according to subtask directed graphs. An improved genetic algorithm is applied to searching for optimal task scheduling solutions. The effectiveness of the scheduling method proposed is verified by a case study with individualized customers' requirements. The results indicate that the proposed task scheduling method is able to achieve better performance than some usual algorithms such as simulated annealing and pattern search.

EEG-informed fMRI analysis during a hand grip task: estimating the relationship between EEG rhythms and the BOLD signal

Directory of Open Access Journals (Sweden)

Roberta eSclocco

2014-04-01

Full Text Available In the last decade, an increasing interest has arisen in investigating the relationship between the electrophysiological and hemodynamic measurements of brain activity, such as EEG and (BOLD fMRI. In particular, changes in BOLD have been shown to be associated with changes in the spectral profile of neural activity, rather than with absolute power. Concurrently, recent findings showed that different EEG rhythms are independently related to changes in the BOLD signal: therefore, it would be important to distinguish between the contributions of the different EEG rhythms to BOLD fluctuations when modeling the relationship between the two signals. Here we propose a method to perform EEG-informed fMRI analysis, in which the EEG regressors take into account both the changes in the spectral profile and the rhythms distinction. We applied it to EEG-fMRI data during a hand grip task in healthy subjects, and compared the results with those obtained by two existing models found in literature. Our results showed that the proposed method better captures the correlations between BOLD signal and EEG rhythms modulations, identifying task-related, well localized activated volumes. Furthermore, we showed that including among the regressors also EEG rhythms not primarily involved in the task enhances the performance of the analysis, even when only correlations with BOLD signal and specific EEG rhythms are explored.

Orbital stability analysis in biomechanics: a systematic review of a nonlinear technique to detect instability of motor tasks.

Science.gov (United States)

Riva, F; Bisi, M C; Stagni, R

2013-01-01

Falls represent a heavy economic and clinical burden on society. The identification of individual chronic characteristics associated with falling is of fundamental importance for the clinicians; in particular, the stability of daily motor tasks is one of the main factors that the clinicians look for during assessment procedures. Various methods for the assessment of stability in human movement are present in literature, and methods coming from stability analysis of nonlinear dynamic systems applied to biomechanics recently showed promise. One of these techniques is orbital stability analysis via Floquet multipliers. This method allows to measure orbital stability of periodic nonlinear dynamic systems and it seems a promising approach for the definition of a reliable motor stability index, taking into account for the whole task cycle dynamics. Despite the premises, its use in the assessment of fall risk has been deemed controversial. The aim of this systematic review was therefore to provide a critical evaluation of the literature on the topic of applications of orbital stability analysis in biomechanics, with particular focus to methodologic aspects. Four electronic databases have been searched for articles relative to the topic; 23 articles were selected for review. Quality of the studies present in literature has been assessed with a customised quality assessment tool. Overall quality of the literature in the field was found to be high. The most critical aspect was found to be the lack of uniformity in the implementation of the analysis to biomechanical time series, particularly in the choice of state space and number of cycles to include in the analysis. Copyright © 2012 Elsevier B.V. All rights reserved.

New social tasks for cognitive psychology; or, new cognitive tasks for social psychology.

Science.gov (United States)

Wettersten, John

2014-01-01

To elucidate how differing theories of rationality lead to differing practices, their social rules must be analyzed. This is true not merely in science but also in society at large. This analysis of social thinking requires both the identification of innate cognitive social psychological processes and explanations of their relations with differing rules of rational practice. These new tasks can enable social psychologists to contribute to the study of how social situations facilitate or inhibit rational practice and enable cognitive psychologists to improve social psychological theory. In contrast to dominant current research strategies, social and cognitive psychologists can integrate social studies of rational practices and their consequences with studies of underlying cognitive psychological processes. In this article I do not attempt to carry out these tasks but rather point to both their lack of recognition and their importance.

Human factors assessment in PRA using Task Analysis Linked Evaluation Technique (TALENT)

International Nuclear Information System (INIS)

Wells, J.E.; Banks, W.W.

1991-01-01

Thirty years ago the US military and US aviation industry, and more recently, in response to the US Three Mile Island and USSR Chernobyl accidents, the US commercial nuclear power industry, acknowledged that human error, as an immediate precursor, and as a latent or indirect influence in the form of training, maintainability, inservice test, and surveillance programs, is a primary contributor to unreality and risk in complex high-reliability systems. A 1985 Nuclear Regulatory Commission (NRC) study of Licensee Event Reports (LERs) suggests that upwards of 65% of commercial nuclear system failures involve human error. Despite the magnitude and nature of human error cited in that study, there has been limited attention to personnel-centered issues, especially person-to-person issues involving group processes, management and organizational environment. The paper discusses NRC integration and applications research with respect to the Task Analysis Linked Evaluation Technique (TALENT) in risk assessment applications

Social Network Analysis as an Analytic Tool for Task Group Research: A Case Study of an Interdisciplinary Community of Practice

Science.gov (United States)

Lockhart, Naorah C.

2017-01-01

Group counselors commonly collaborate in interdisciplinary settings in health care, substance abuse, and juvenile justice. Social network analysis is a methodology rarely used in counseling research yet has potential to examine task group dynamics in new ways. This case study explores the scholarly relationships among 36 members of an…

Measuring pilot workload in a motion base simulator. III - Synchronous secondary task

Science.gov (United States)

Kantowitz, Barry H.; Bortolussi, Michael R.; Hart, Sandra G.

1987-01-01

This experiment continues earlier research of Kantowitz et al. (1983) conducted in a GAT-1 motion-base trainer to evaluate choice-reaction secondary tasks as measures of pilot work load. The earlier work used an asynchronous secondary task presented every 22 sec regardless of flying performance. The present experiment uses a synchronous task presented only when a critical event occurred on the flying task. Both two- and four-choice visual secondary tasks were investigated. Analysis of primary flying-task results showed no decrement in error for altitude, indicating that the key assumption necessary for using a choice secondary task was satisfied. Reaction times showed significant differences between 'easy' and 'hard' flight scenarios as well as the ability to discriminate among flight tasks.

Task management in the new ATLAS production system

International Nuclear Information System (INIS)

De, K; Golubkov, D; Klimentov, A; Potekhin, M; Vaniachine, A

2014-01-01

This document describes the design of the new Production System of the ATLAS experiment at the LHC [1]. The Production System is the top level workflow manager which translates physicists' needs for production level processing and analysis into actual workflows executed across over a hundred Grid sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. In the new design, the main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, DEFT manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. The JEDI component then dynamically translates the task definitions from DEFT into actual workload jobs executed in the PanDA Workload Management System [2]. We present the requirements, design parameters, basics of the object model and concrete solutions utilized in building the new Production System and its components.

Walking modality, but not task difficulty, influences the control of dual-task walking.

Science.gov (United States)

Wrightson, J G; Smeeton, N J

2017-10-01

During dual-task gait, changes in the stride-to-stride variability of stride time (STV) are suggested to represent the allocation of cognitive control to walking [1]. However, contrasting effects have been reported for overground and treadmill walking, which may be due to differences in the relative difficulty of the dual task. Here we compared the effect of overground and treadmill dual-task walking on STV in 18 healthy adults. Participants walked overground and on a treadmill for 120s during single-task (walking only) and dual-task (walking whilst performing serial subtractions in sevens) conditions. Dual-task effects on STV, cognitive task (serial subtraction) performance and perceived task difficulty were compared between walking modalities. STV was increased during overground dual-task walking, but was unchanged during treadmill dual-task walking. There were no differences in cognitive task performance or perceived task difficulty. These results show that gait is controlled differently during overground and treadmill dual-task walking. However, these differences are not solely due to differences in task difficulty, and may instead represent modality dependent control strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

Two-dimensional systolic-array architecture for pixel-level vision tasks

Science.gov (United States)

Vijverberg, Julien A.; de With, Peter H. N.

2010-05-01

This paper presents ongoing work on the design of a two-dimensional (2D) systolic array for image processing. This component is designed to operate on a multi-processor system-on-chip. In contrast with other 2D systolic-array architectures and many other hardware accelerators, we investigate the applicability of executing multiple tasks in a time-interleaved fashion on the Systolic Array (SA). This leads to a lower external memory bandwidth and better load balancing of the tasks on the different processing tiles. To enable the interleaving of tasks, we add a shadow-state register for fast task switching. To reduce the number of accesses to the external memory, we propose to share the communication assist between consecutive tasks. A preliminary, non-functional version of the SA has been synthesized for an XV4S25 FPGA device and yields a maximum clock frequency of 150 MHz requiring 1,447 slices and 5 memory blocks. Mapping tasks from video content-analysis applications from literature on the SA yields reductions in the execution time of 1-2 orders of magnitude compared to the software implementation. We conclude that the choice for an SA architecture is useful, but a scaled version of the SA featuring less logic with fewer processing and pipeline stages yielding a lower clock frequency, would be sufficient for a video analysis system-on-chip.

78 FR 2996 - Meeting of the Community Preventive Services Task Force (Task Force)

Science.gov (United States)

2013-01-15

... Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention... Services Task Force (Task Force). The Task Force is independent and nonfederal. Its members are nationally.... The Task Force was convened in 1996 by the Department of Health and Human Services (HHS) to assess the...

77 FR 56845 - Meeting of the Community Preventive Services Task Force (Task Force)

Science.gov (United States)

2012-09-14

... Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention... Services Task Force (Task Force). The Task Force is independent and nonfederal. Its members are nationally.... The Task Force was convened in 1996 by the Department of Health and Human Services (HHS) to assess the...

78 FR 27969 - Meeting of the Community Preventive Services Task Force (Task Force)

Science.gov (United States)

2013-05-13

... Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention... Services Task Force (Task Force). The Task Force is independent and nonfederal. Its members are nationally.... The Task Force was convened in 1996 by the Department of Health and Human Services (HHS) to assess the...

Suggested improvements to the definitions of Standardized Plant Analysis of Risk-Human Reliability Analysis (SPAR-H) performance shaping factors, their levels and multipliers and the nominal tasks

International Nuclear Information System (INIS)

Laumann, Karin; Rasmussen, Martin

2016-01-01

This paper discusses the definitions and content of eight performance shaping factors (PSFs) used in Standardized Plant Analysis of Risk-Human Reliability Analysis (SPAR-H) and their levels and multipliers. Definitions of nominal tasks are also discussed. The discussion is based on a review of literature on PSFs, interviews with consultants who have carried out SPAR-H analysis in the petroleum industry and an evaluation of human reliability analysis reports based on SPAR-H analysis. We concluded that SPAR-H definitions and descriptions of the PSFs are unclear and overlap too much, making it difficult for the analyst to choose between them and select the appropriate level. This reduces inter-rater reliability and thus the consistency of SPAR-H analyses. New definitions of the PSFs, levels and multipliers are suggested with the aim to develop more specific definitions of the PSFs in order to increase the inter-rater reliability of SPAR-H. Another aim was to construct more varied and more nuanced levels and multipliers to improve the capacity of SPAR-H analysis to capture the degree of difficulty faced by operators in different scenarios. We also suggest that only one of two nominal SPAR-H tasks should be retained owing to the difficulty in distinguishing between them. - Highlights: • The SPAR-H guidelines should be revised. • Descriptions of the PSFs should be improved. • New definitions should reduce overlap between the PSFs. • The multipliers are based on an “old” method and should be revised. • Some PSF levels and multipliers in SPAR-H are not logical.

Beads task vs. box task: The specificity of the jumping to conclusions bias.

Science.gov (United States)

Balzan, Ryan P; Ephraums, Rachel; Delfabbro, Paul; Andreou, Christina

2017-09-01

Previous research involving the probabilistic reasoning 'beads task' has consistently demonstrated a jumping-to-conclusions (JTC) bias, where individuals with delusions make decisions based on limited evidence. However, recent studies have suggested that miscomprehension may be confounding the beads task. The current study aimed to test the conventional beads task against a conceptually simpler probabilistic reasoning "box task" METHODS: One hundred non-clinical participants completed both the beads task and the box task, and the Peters et al. Delusions Inventory (PDI) to assess for delusion-proneness. The number of 'draws to decision' was assessed for both tasks. Additionally, the total amount of on-screen evidence was manipulated for the box task, and two new box task measures were assessed (i.e., 'proportion of evidence requested' and 'deviation from optimal solution'). Despite being conceptually similar, the two tasks did not correlate, and participants requested significantly less information on the beads task relative to the box task. High-delusion-prone participants did not demonstrate hastier decisions on either task; in fact, for box task, this group was observed to be significantly more conservative than low-delusion-prone group. Neither task was incentivized; results need replication with a clinical sample. Participants, and particularly those identified as high-delusion-prone, displayed a more conservative style of responding on the novel box task, relative to the beads task. The two tasks, whilst conceptually similar, appear to be tapping different cognitive processes. The implications of these results are discussed in relation to the JTC bias and the theoretical mechanisms thought to underlie it. Copyright © 2016 Elsevier Ltd. All rights reserved.

Automatic Retrieval of Newly Instructed Cue-Task Associations Seen in Task-Conflict Effects in the First Trial after Cue-Task Instructions.

Science.gov (United States)

Meiran, Nachshon; Pereg, Maayan

2017-01-01

Novel stimulus-response associations are retrieved automatically even without prior practice. Is this true for novel cue-task associations? The experiment involved miniblocks comprising three phases and task switching. In the INSTRUCTION phase, two new stimuli (or familiar cues) were arbitrarily assigned as cues for up-down/right-left tasks performed on placeholder locations. In the UNIVALENT phase, there was no task cue since placeholder's location afforded one task but the placeholders were the stimuli that we assigned as task cues for the following BIVALENT phase (involving target locations affording both tasks). Thus, participants held the novel cue-task associations in memory while executing the UNIVALENT phase. Results show poorer performance in the first univalent trial when the placeholder was associated with the opposite task (incompatible) than when it was compatible, an effect that was numerically larger with newly instructed cues than with familiar cues. These results indicate automatic retrieval of newly instructed cue-task associations.

Incorporating Language Structure in a Communicative Task: An Analysis of the Language Component of a Communicative Task in the LINC Home Study Program

Science.gov (United States)

Lenchuk, Iryna

2014-01-01

The purpose of this article is to analyze a task included in the LINC Home Study (LHS) program. LHS is a federally funded distance education program offered to newcomers to Canada who are unable to attend regular LINC classes. A task, in which a language structure (a gerund) is chosen and analyzed, was selected from one instructional module of LHS…

Facilitating an L2 Book Club: A Conversation-Analytic Study of Task Management

Science.gov (United States)

Ro, Eunseok

2018-01-01

This study employs conversation analysis to examine a facilitator's interactional practices in the post-expansion phase of students' presentations in the context of a book club for second language learning. The analysis shows how the facilitator establishes intersubjectivity with regard to the ongoing task and manages students' task performance.…

Application of GIS Technology for Town Planning Tasks Solving

Science.gov (United States)

Kiyashko, G. A.

2017-11-01

For developing territories, one of the most actual town-planning tasks is to find out the suitable sites for building projects. The geographic information system (GIS) allows one to model complex spatial processes and can provide necessary effective tools to solve these tasks. We propose several GIS analysis models which can define suitable settlement allocations and select appropriate parcels for construction objects. We implement our models in the ArcGIS Desktop package and verify by application to the existing objects in Primorsky Region (Primorye Territory). These suitability models use several variations of the analysis method combinations and include various ways to resolve the suitability task using vector data and a raster data set. The suitability models created in this study can be combined, and one model can be integrated into another as its part. Our models can be updated by other suitability models for further detailed planning.

Engineering task plan for development, fabrication, and deployment of nested, fixed depth fluidic sampling and at-tank analysis systems

International Nuclear Information System (INIS)

REICH, F.R.

1999-01-01

An engineering task plan was developed that presents the resources, responsibilities, and schedules for the development, test, and deployment of the nested, fixed-depth fluidic sampling and at-tank analysis system. The sampling system, deployed in the privatization contract double-shell tank feed tank, will provide waste samples for assuring the readiness of the tank for shipment to the privatization contractor for vitrification. The at-tank analysis system will provide ''real-time'' assessments of the sampled wastes' chemical and physical properties. These systems support the Hanford Phase 1B Privatization Contract

The BOLD Response during Stroop Task-Like Inhibition Paradigms: Effects of Task Difficulty and Task-Relevant Modality

Science.gov (United States)

Mitchell, Rachel L. C.

2005-01-01

Previous studies of the Stroop task propose two key mediators: the prefrontal and cingulate cortices but hints exist of functional specialization within these regions. This study aimed to examine the effect of task modality upon the prefrontal and cingulate response by examining the response to colour, number, and shape Stroop tasks whilst BOLD…

The impact of task demand on visual word recognition.

Science.gov (United States)

Yang, J; Zevin, J

2014-07-11

The left occipitotemporal cortex has been found sensitive to the hierarchy of increasingly complex features in visually presented words, from individual letters to bigrams and morphemes. However, whether this sensitivity is a stable property of the brain regions engaged by word recognition is still unclear. To address the issue, the current study investigated whether different task demands modify this sensitivity. Participants viewed real English words and stimuli with hierarchical word-likeness while performing a lexical decision task (i.e., to decide whether each presented stimulus is a real word) and a symbol detection task. General linear model and independent component analysis indicated strong activation in the fronto-parietal and temporal regions during the two tasks. Furthermore, the bilateral inferior frontal gyrus and insula showed significant interaction effects between task demand and stimulus type in the pseudoword condition. The occipitotemporal cortex showed strong main effects for task demand and stimulus type, but no sensitivity to the hierarchical word-likeness was found. These results suggest that different task demands on semantic, phonological and orthographic processes can influence the involvement of the relevant regions during visual word recognition. Copyright © 2014 IBRO. Published by Elsevier Ltd. All rights reserved.

Observer efficiency in free-localization tasks with correlated noise

Directory of Open Access Journals (Sweden)

Craig eAbbey

2014-05-01

Full Text Available The efficiency of visual tasks involving localization has traditionally been evaluated using forced choice experiments that capitalize on independence across locations to simplify the performance of the ideal observer. However, developments in ideal observer analysis have shown how an ideal observer can be defined for free-localization tasks, where a target can appear anywhere in a defined search region and subjects respond by localizing the target. Since these tasks are representative of many real-world search tasks, it is of interest to evaluate the efficiency of observer performance in them. The central question of this work is whether humans are able to effectively use the information in a free-localization task relative to a similar task where target location is fixed. We use a yes-no detection task at a cued location as the reference for this comparison. Each of the tasks is evaluated using a Gaussian target profile embedded in four different Gaussian noise backgrounds having power-law noise power spectra with exponents ranging from 0 to 3. The free localization task had a square 6.7° search region. We report on two follow-up studies investigating efficiency in a detect-and-localize task, and the effect of processing the white-noise backgrounds. In the fixed-location detection task, we find average observer efficiency ranges from 35% to 59% for the different noise backgrounds. Observer efficiency improves dramatically in the tasks involving localization, ranging from 63% to 82% in the forced localization tasks and from 78% to 92% in the detect-and- localize tasks. Performance in white noise, the lowest efficiency condition, was improved by filtering to give them a power-law exponent of 2. Classification images, used to examine spatial frequency weights for the tasks, show better tuning to ideal weights in the free-localization tasks. The high absolute levels of efficiency suggest that observers are well-adapted to free-localization tasks.

Effect of education on listening comprehension of sentences on healthy elderly: analysis of number of correct responses and task execution time.

Science.gov (United States)

Silagi, Marcela Lima; Rabelo, Camila Maia; Schochat, Eliane; Mansur, Letícia Lessa

2017-11-13

To analyze the effect of education on sentence listening comprehension on cognitively healthy elderly. A total of 111 healthy elderly, aged 60-80 years of both genders were divided into two groups according to educational level: low education (0-8 years of formal education) and high education (≥9 years of formal education). The participants were assessed using the Revised Token Test, an instrument that supports the evaluation of auditory comprehension of orders with different working memory and syntactic complexity demands. The indicators used for performance analysis were the number of correct responses (accuracy analysis) and task execution time (temporal analysis) in the different blocks. The low educated group had a lower number of correct responses than the high educated group on all blocks of the test. In the temporal analysis, participants with low education had longer execution time for commands on the first four blocks related to working memory. However, the two groups had similar execution time for blocks more related to syntactic comprehension. Education influenced sentence listening comprehension on elderly. Temporal analysis allowed to infer over the relationship between comprehension and other cognitive abilities, and to observe that the low educated elderly did not use effective compensation strategies to improve their performances on the task. Therefore, low educational level, associated with aging, may potentialize the risks for language decline.

Fluctuations in work motivation: tasks do not matter!

Science.gov (United States)

Navarro, Jose; Curioso, Fernando; Gomes, Duarte; Arrieta, Carlos; Cortes, Mauricio

2013-01-01

Previous studies have shown that work motivation fluctuates considerably and in a nonlinear way over time. In the present research, we are interested in studying if the task at hand does or does not influence the presence of these fluctuations. We gathered daily registers from 69 workers during 21 consecutive working days (7036 registers) of task developed and levels of motivation, self-efficacy beliefs and instrumentalities perception. These registers were then categorized into a list of labor activities in main tasks and subtasks by means of three judges with a high level of agreement (97.47% for tasks, and 98.64% for subtasks). Taking the MSSD statistic (mean squared successive difference) of the average of motivation, self-efficacy and instrumentality, and using hierarchical regression analysis we have found that tasks (beta = .03; p = .188) and subtasks (beta = .10; p = .268) do not affect the presence of fluctuations in motivation. These results reveal instability in work motivation independently from the tasks and subtasks that the workers do. We proceed to find that fluctuations in work motivation show a fractal structure across the different tasks we do in a working day. Implications of these results to motivational theory will be discussed as well as possible explanations (e.g. the influence of affect in work motivation) and directions for future research are provided.

Darwinian algorithms and the Wason selection task: a factorial analysis of social contract selection task problems.

Science.gov (United States)

Platt, R D; Griggs, R A

1993-08-01

In four experiments with 760 subjects, the present study examined Cosmides' Darwinian algorithm theory of reasoning: specifically, its explanation of facilitation on the Wason selection task. The first experiment replicated Cosmides' finding of facilitation for social contract versions of the selection task, using both her multiple-problem format and a single-problem format. Experiment 2 examined performance on Cosmides' three main social contract problems while manipulating the perspective of the subject and the presence and absence of cost-benefit information. The presence of cost-benefit information improved performance in two of the three problems while the perspective manipulation had no effect. In Experiment 3, the cost-benefit effect was replicated; and performance on one of the three problems was enhanced by the presence of explicit negatives on the NOT-P and NOT-Q cards. Experiment 4 examined the role of the deontic term "must" in the facilitation observed for two of the social contract problems. The presence of "must" led to a significant improvement in performance. The results of these experiments are strongly supportive of social contract theory in that cost-benefit information is necessary for substantial facilitation to be observed in Cosmides' problems. These findings also suggest the presence of other cues that can help guide subjects to a deontic social contract interpretation when the social contract nature of the problem is not clear.

Task force report on health effects assessment

International Nuclear Information System (INIS)

Anderson, C.; Hushon, J.

1978-08-01

From April to August, 1978 MITRE supported the Health Effects Assessment Task Force sponsored by the Office of the Assistant Secretary for the Environment at DOE. The findings of that Task Force are incorporated in this report and include a detailed definition of health effects assessment, a survey of the mandates for health effects assessments within DOE/EV, a review of current DOE-EV health effects assessment activities, an analysis of the constraints affecting the health effects assessment process and a discussion of the Task Force recommendations. Included as appendices are summaries of two workshops conducted by the Task Force to determine the state-of-the-art of health effects assessment and modeling and a review of risk assessment activities in other federal agencies. The primary recommendation of the panel was that an office be designated or created under the Office of the Assistant Secretary for the Environment to coordinate the Health Effects Risk Assessment effort covering up to 40 program and policy areas; a similar need was expressed for the environmental effects assessment area. 1 tab

Designing Task-Based Syllabus For Writing Class

Directory of Open Access Journals (Sweden)

Sundari Hanna

2018-01-01

Full Text Available Writing is viewed as the most complex skill to learn and to teach. Beside learner factors, teacher, materials and syllabus may also affect the process of learning language as foreign language. Syllabus, in general, can be defined as a set of what is taught (content and the way it is taught (procedure. This current research aims to design a task-based syllabus for writing class at university level. This study was conducted by qualitative descriptive design with 92 students and 4 lecturers as respondents. As part of research and development project in one private university in Jakarta, a developed task-based syllabus was based on need analysis and the principles of task-based language teaching. Students’ proficiency levels are fair with sentence patterns and grammar as the most difficult aspects. Academic writing is more preferable orientation with the small portions of creative writing. Then, the developed task-based syllabus has been proposed for writing class which covers the components of goal (learning outcome, course description and objectives, a set of writing tasks, features of content focus and language focus and course evaluation. The developed syllabus, then, can guide the lecturers in designing lesson plan and selecting materials for writing class.

Investigating Antecedents of Task Commitment and Task Attraction in Service Learning Team Projects

Science.gov (United States)

Schaffer, Bryan S.; Manegold, Jennifer G.

2018-01-01

The authors investigated the antecedents of team task cohesiveness in service learning classroom environments. Focusing on task commitment and task attraction as key dependent variables representing cohesiveness, and task interdependence as the primary independent variable, the authors position three important task action phase processes as…

78 FR 59939 - Meeting of the Community Preventive Services Task Force (Task Force)

Science.gov (United States)

2013-09-30

... Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention... September 17, 2013, announcing the next meeting of the Community Preventive Services Task Force (Task Force... the Task Force to consider the findings of systematic reviews and issue findings and recommendations...

Performance Measure Analysis of Command and Control Organizational and Task Structures

National Research Council Canada - National Science Library

Smith, Neil

1996-01-01

.... The purpose of the initial A2C2 experiment was to examine the relationships between organizational structures and task structures involving competition for scarce assets, to serve as an integration...

Analysis of Time-Dependent Brain Network on Active and MI Tasks for Chronic Stroke Patients.

Directory of Open Access Journals (Sweden)

Da-Hye Kim

Full Text Available Several researchers have analyzed brain activities by investigating brain networks. However, there is a lack of the research on the temporal characteristics of the brain network during a stroke by EEG and the comparative studies between motor execution and imagery, which became known to have similar motor functions and pathways. In this study, we proposed the possibility of temporal characteristics on the brain networks of a stroke. We analyzed the temporal properties of the brain networks for nine chronic stroke patients by the active and motor imagery tasks by EEG. High beta band has a specific role in the brain network during motor tasks. In the high beta band, for the active task, there were significant characteristics of centrality and small-worldness on bilateral primary motor cortices at the initial motor execution. The degree centrality significantly increased on the contralateral primary motor cortex, and local efficiency increased on the ipsilateral primary motor cortex. These results indicate that the ipsilateral primary motor cortex constructed a powerful subnetwork by influencing the linked channels as compensatory effect, although the contralateral primary motor cortex organized an inefficient network by using the connected channels due to lesions. For the MI task, degree centrality and local efficiency significantly decreased on the somatosensory area at the initial motor imagery. Then, there were significant correlations between the properties of brain networks and motor function on the contralateral primary motor cortex and somatosensory area for each motor execution/imagery task. Our results represented that the active and MI tasks have different mechanisms of motor acts. Based on these results, we indicated the possibility of customized rehabilitation according to different motor tasks. We expect these results to help in the construction of the customized rehabilitation system depending on motor tasks by understanding temporal

Information seeking research needs extension towards tasks and technology

Directory of Open Access Journals (Sweden)

Kalervo Järvelin

2004-01-01

Full Text Available This paper discusses the research into information seeking and its directions at a general level. We approach this topic by analysis and argumentation based on past research in the domain. We begin by presenting a general model of information seeking and retrieval (IS&R which is used to derive nine broad dimensions that are needed to analyze IS&R. Past research is then contrasted with the dimensions and shown not to cover the dimensions sufficiently. Based on an analysis of the goals of information seeking research, and a view on human task performance augmentation, it is then shown that information seeking is intimately associated with, and dependent on, other aspects of work; tasks and technology included. This leads to a discussion on design and evaluation frameworks for IS&R, based on which two action lines are proposed: information retrieval research needs extension towards more context and information seeking research needs extension towards tasks and technology.

Writing Tasks and Immediate Auditory Memory in Peruvian Schoolchildren

Directory of Open Access Journals (Sweden)

José Luis Ventura-León

2017-04-01

Full Text Available The purpose of the study is determine the relationship between a group of writing tasks and the immediate auditory memory, as well as to establish differences according to sex and level of study. Two hundred and three schoolchildren of fifth and sixth of elementary education from Lima (Peru participated, they were selected by a non-probabilistic sample. The Immediate Auditory Memory Test and the Battery for Evaluation of Writing Processes (known in Spanish as PROESC were used. Central tendency measures were used for descriptive analysis. We employed the Mann-Whitney U test, Spearman Rho test and probability of superiority as effect size measurement for the inferential analysis. The results indicated a moderate direct and significant correlation between writing tasks and immediate auditory memory in general way and low correlations between dimensions. Finally, it showed that the differences in immediate auditory memory and writing tasks according to sex and level of study does not have practical significance.

Sex differences in task distribution and task exposures among Danish house painters:

DEFF Research Database (Denmark)

Heilskov-Hansen, Thomas; Svendsen, Susanne Wulff; Thomsen, Jane Frølund

2014-01-01

OBJECTIVES: Sex differences in occupational biomechanical exposures may be part of the explanation why musculoskeletal complaints and disorders tend to be more common among women than among men. We aimed to determine possible sex differences in task distribution and task-specific postures...... correction were used to evaluate sex differences. RESULTS: Statistically significant (psex differences were revealed in task proportions, but the proportions differed by less than 4%. For task exposures, no statistically significant sex differences were found. CONCLUSIONS: Only minor sex differences...... and movements of the upper extremities among Danish house painters, and to establish sex-specific task exposure matrices. METHODS: To obtain task distributions, we sent out a questionnaire to all members of the Painters' Union in Denmark (N = 9364), of whom 53% responded. Respondents reported their task...

The Effect of a Workload-Preview on Task-Prioritization and Task-Performance

Science.gov (United States)

Minotra, Dev

2012-01-01

With increased volume and sophistication of cyber attacks in recent years, maintaining situation awareness and effective task-prioritization strategy is critical to the task of cybersecurity analysts. However, high levels of mental-workload associated with the task of cybersecurity analyst's limits their ability to prioritize tasks.…

Changes in balance coordination and transfer to an unlearned balance task after slackline training: a self-organizing map analysis.

Science.gov (United States)

Serrien, Ben; Hohenauer, Erich; Clijsen, Ron; Taube, Wolfgang; Baeyens, Jean-Pierre; Küng, Ursula

2017-11-01

How humans maintain balance and change postural control due to age, injury, immobility or training is one of the basic questions in motor control. One of the problems in understanding postural control is the large set of degrees of freedom in the human motor system. Therefore, a self-organizing map (SOM), a type of artificial neural network, was used in the present study to extract and visualize information about high-dimensional balance strategies before and after a 6-week slackline training intervention. Thirteen subjects performed a flamingo and slackline balance task before and after the training while full body kinematics were measured. Range of motion, velocity and frequency of the center of mass and joint angles from the pelvis, trunk and lower leg (45 variables) were calculated and subsequently analyzed with an SOM. Subjects increased their standing time significantly on the flamingo (average +2.93 s, Cohen's d = 1.04) and slackline (+9.55 s, d = 3.28) tasks, but the effect size was more than three times larger in the slackline. The SOM analysis, followed by a k-means clustering and marginal homogeneity test, showed that the balance coordination pattern was significantly different between pre- and post-test for the slackline task only (χ 2  = 82.247; p balance coordination on the slackline could be characterized by an increase in range of motion and a decrease in velocity and frequency in nearly all degrees of freedom simultaneously. The observation of low transfer of coordination strategies to the flamingo task adds further evidence for the task-specificity principle of balance training, meaning that slackline training alone will be insufficient to increase postural control in other challenging situations.

Exploring relations between task conflict and informational conflict in the Stroop task.

Science.gov (United States)

Entel, Olga; Tzelgov, Joseph; Bereby-Meyer, Yoella; Shahar, Nitzan

2015-11-01

In this study, we tested the proposal that the Stroop task involves two conflicts--task conflict and informational conflict. Task conflict was defined as the latency difference between color words and non-letter neutrals, and manipulated by varying the proportion of color words versus non-letter neutrals. Informational conflict was defined as the latency difference between incongruent and congruent trials and manipulated by varying the congruent-to-incongruent trial ratio. We replicated previous findings showing that increasing the ratio of incongruent-to-congruent trials reduces the latency difference between the incongruent and congruent condition (i.e., informational conflict), as does increasing the proportion of color words (i.e., task conflict). A significant under-additive interaction between the two proportion manipulations (congruent vs. incongruent and color words vs. neutrals) indicated that the effects of task conflict and informational conflict were not additive. By assessing task conflict as the contrast between color words and neutrals, we found that task conflict existed in all of our experimental conditions. Under specific conditions, when task conflict dominated behavior by explaining most of the variability between congruency conditions, we also found negative facilitation, thus demonstrating that this effect is a special case of task conflict.

Investigating Perfect Timesharing: The Relationship between IM-Compatible Tasks and Dual-Task Performance

Science.gov (United States)

Halvorson, Kimberly M.; Ebner, Herschel; Hazeltine, Eliot

2013-01-01

Why are dual-task costs reduced with ideomotor (IM) compatible tasks (Greenwald & Shulman, 1973; Lien, Proctor & Allen, 2002)? In the present experiments, we first examine three different measures of single-task performance (pure single-task blocks, mixed blocks, and long stimulus onset asynchrony [SOA] trials in dual-task blocks) and two…

Euro-Quebec Hydro-Hydrogen Pilot Project (EQHHPP). Supplementary task programme

International Nuclear Information System (INIS)

1992-06-01

In the course of Phase II of the Euro-Quebec Hydro-Hydrogen Pilot Project (EQHHPP), it was found that a number of topical aspects required more detail investigations, specific tests etc. than could be cared for within Phase II, under the constraint of available time and funds. Consequently, supplementary tasks have been defined and contracted. This report is the Final Report on the results achieved during the performance of these tasks. The tasks cover a wide field for example LH 2 Airbus studies some can be associated with more than one aspect. The table following hereunder may give an overview over the tasks covered. For all 23 papers a separate subject analysis has been carried out. (orig.)

Microprocessor multi-task monitor

International Nuclear Information System (INIS)

Ludemann, C.A.

1983-01-01

This paper describes a multi-task monitor program for microprocessors. Although written for the Intel 8085, it incorporates features that would be beneficial for implementation in other microprocessors used in controlling and monitoring experiments and accelerators. The monitor places permanent programs (tasks) arbitrarily located throughout ROM in a priority ordered queue. The programmer is provided with the flexibility to add new tasks or modified versions of existing tasks, without having to comply with previously defined task boundaries or having to reprogram all of ROM. Scheduling of tasks is triggered by timers, outside stimuli (interrupts), or inter-task communications. Context switching time is of the order of tenths of a milllisecond

[Preferences of general practitioners in metropolitan France with regard to the delegation of medico-administrative tasks to secretaries assisting medico-social workers: Study in conjoint analysis].

Science.gov (United States)

Chanu, A; Caron, A; Ficheur, G; Berkhout, C; Duhamel, A; Rochoy, M

2018-05-01

A general practitioner's office is an economic unit where task delegation is an essential component in improving the quality and performance of work. To classify the preferences of general practitioners regarding the delegation of medical-administrative tasks to assistant medical-social secretaries. Conjoint analysis was applied to a random sample of 175 general practitioners working in metropolitan France. Ten scenarios were constructed based on seven attributes: training for medical secretaries, logistical support during the consultation, delegation of management planning, medical records, accounting, maintenance, and taking initiative on the telephone. A factorial design was used to reduce the number of scenarios. Physicians' socio-demographic variables were collected. One hundred and three physicians responded and the analysis included 90 respondents respecting the transitivity of preferences hypothesis. Perceived difficulty was scored 2.8 out of 5. The high rates of respondents (59%; 95% CI [51.7-66.3]) and transitivity (87.5%; 95% CI [81.1-93.9]) showed physicians' interest in this topic. Delegation of tasks concerning management planning (OR=2.91; 95% CI [2.40-13.52]) and medical records (OR=1.88; 95% CI [1.56-2.27]) were the two most important attributes for physicians. The only variable for which the choice of a secretary was not taken into account was logistical support. This is a first study examining the choices of general practitioners concerning the delegation of tasks to assistants. These findings are helpful to better understand the determinants of practitioners' choices in delegating certain tasks or not. They reveal doctors' desire to limit their ancillary tasks in order to favor better use of time for "medical" tasks. They also expose interest for training medical secretaries and widening their field of competence, suggesting the emergence of a new professional occupation that could be called "medical assistant". Copyright © 2018 Elsevier Masson

Task Demands in OSCEs Influence Learning Strategies.

Science.gov (United States)

Lafleur, Alexandre; Laflamme, Jonathan; Leppink, Jimmie; Côté, Luc

2017-01-01

Models on pre-assessment learning effects confirmed that task demands stand out among the factors assessors can modify in an assessment to influence learning. However, little is known about which tasks in objective structured clinical examinations (OSCEs) improve students' cognitive and metacognitive processes. Research is needed to support OSCE designs that benefit students' metacognitive strategies when they are studying, reinforcing a hypothesis-driven approach. With that intent, hypothesis-driven physical examination (HDPE) assessments ask students to elicit and interpret findings of the physical exam to reach a diagnosis ("Examine this patient with a painful shoulder to reach a diagnosis"). When studying for HDPE, students will dedicate more time to hypothesis-driven discussions and practice than when studying for a part-task OSCE ("Perform the shoulder exam"). It is expected that the whole-task nature of HDPE will lead to a hypothesis-oriented use of the learning resources, a frequent use of adjustment strategies, and persistence with learning. In a mixed-methods study, 40 medical students were randomly paired and filmed while studying together for two hypothetical OSCE stations. Each 25-min study period began with video cues asking to study for either a part-task OSCE or an HDPE. In a crossover design, sequences were randomized for OSCEs and contents (shoulder or spine). Time-on-task for discussions or practice were categorized as "hypothesis-driven" or "sequence of signs and maneuvers." Content analysis of focus group interviews summarized students' perception of learning resources, adjustment strategies, and persistence with learning. When studying for HDPE, students allocate significantly more time for hypothesis-driven discussions and practice. Students use resources contrasting diagnoses and report persistence with learning. When studying for part-task OSCEs, time-on-task is reversed, spent on rehearsing a sequence of signs and maneuvers. OSCEs with

The Effects of Injury Prevention Programs on the Biomechanics of Landing Tasks: A Systematic Review With Meta-analysis.

Science.gov (United States)

Lopes, Thiago Jambo Alves; Simic, Milena; Myer, Gregory D; Ford, Kevin R; Hewett, Timothy E; Pappas, Evangelos

2018-05-01

Anterior cruciate ligament (ACL) tear is a common injury in sports and often occurs during landing from a jump. To synthesize the evidence on the effects of injury prevention programs (IPPs) on landing biomechanics as they relate to the ligament, quadriceps, trunk, and leg dominance theories associated with ACL injury risk. Meta-analysis. Six electronic databases were searched for studies that investigated the effect of IPPs on landing task biomechanics. Prospective studies that reported landing biomechanics at baseline and post-IPP were included. Results from trunk, hip, and knee kinematics and kinetics related to the ACL injury theories were extracted, and meta-analyses were performed when possible. The criteria were met by 28 studies with a total of 466 participants. Most studies evaluated young females, bilateral landing tasks, and recreational athletes, while most variables were related to the ligament and quadriceps dominance theories. An important predictor of ACL injury, peak knee abduction moment, decreased ( P = .01) after the IPPs while other variables related to the ligament dominance theory did not change. Regarding the quadriceps dominance theory, after the IPPs, angles of hip flexion at initial contact ( P = .009), peak hip flexion ( P = .002), and peak knee flexion ( P = .007) increased, while knee flexion at initial contact did not change ( P = .18). Moreover, peak knee flexion moment decreased ( P = .005) and peak vertical ground-reaction force did not change ( P = .10). The exercises used in IPPs might have the potential to improve landing task biomechanics related to the quadriceps dominance theory, especially increasing peak knee and hip flexion angles. Importantly, peak knee abduction moment decreased, which indicates that IPPs influence a desired movement strategy to help athletes overcome dangerous ligament dominance loads arising from lack of frontal plane control during dynamic tasks. The lack of findings for some biomechanical variables

Strategic Adaptation to Task Characteristics, Incentives, and Individual Differences in Dual-Tasking.

Directory of Open Access Journals (Sweden)

Christian P Janssen

Full Text Available We investigate how good people are at multitasking by comparing behavior to a prediction of the optimal strategy for dividing attention between two concurrent tasks. In our experiment, 24 participants had to interleave entering digits on a keyboard with controlling a randomly moving cursor with a joystick. The difficulty of the tracking task was systematically varied as a within-subjects factor. Participants were also exposed to different explicit reward functions that varied the relative importance of the tracking task relative to the typing task (between-subjects. Results demonstrate that these changes in task characteristics and monetary incentives, together with individual differences in typing ability, influenced how participants choose to interleave tasks. This change in strategy then affected their performance on each task. A computational cognitive model was used to predict performance for a wide set of alternative strategies for how participants might have possibly interleaved tasks. This allowed for predictions of optimal performance to be derived, given the constraints placed on performance by the task and cognition. A comparison of human behavior with the predicted optimal strategy shows that participants behaved near optimally. Our findings have implications for the design and evaluation of technology for multitasking situations, as consideration should be given to the characteristics of the task, but also to how different users might use technology depending on their individual characteristics and their priorities.

78 FR 63208 - UPDATE-Meeting of the Community Preventive Services Task Force (Task Force)

Science.gov (United States)

2013-10-23

... of the Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and... Community Preventive Services Task Force (Task Force). The in-person Task Force meeting is being replaced by... CDC's ability to complete the necessary scientific and logistical support for the meeting. The Task...

Snapshots of mathematics teacher noticing during task design

Science.gov (United States)

Choy, Ban Heng

2016-09-01

Designing a mathematically worthwhile task is critical for promoting students' reasoning. To improve task design skills, teachers often engage in collaborative lesson planning activities such as lesson study. However, to learn from the process of lesson study, it is important for teachers to notice productively the concepts, students' confusion and the design of the task. But what researchers mean by productive noticing varies. In this article, I present the FOCUS Framework which highlights two characteristics of productive noticing: having an explicit focus for noticing and focusing noticing through pedagogical reasoning. Using these two characteristics, I develop snapshots of noticing as a representation of practice to present a fine-grained analysis of teacher noticing. Through vignettes of teachers discussing the design of a task to teach fractions, I illustrate how two teachers' noticing can be analysed and represented using snapshots of noticing. To conclude, I highlight what snapshots of noticing tell us about a teacher's noticing and suggest ways to use these snapshots in future studies of noticing.

Task Analysis: A Systematic Approach to Designing New Careers Programs.

Science.gov (United States)

Jackson, Vivian C.

This guide presents the primary approaches, tools, and techniques utilized by the New Careers Training Laboratory (NCTL) staff to provide skills in training and to conduct agency task analyses. Much of the technical information has been taken from an earlier NCTL publication by Tita Beal, "A New Careers Guide for Career Development…

Influence of time pressure in a simple response task, a choice-by-location task, and the Simon task

NARCIS (Netherlands)

van der Lubbe, Robert Henricus Johannes; Jaśkowski, Piotr; Wauschkuhn, Bernd; Verleger, Rolf

2001-01-01

Examined the influence of strategy for a simple response task, a choice-by-location task, and the Simon task by varying time pressure in 11 Ss (mean age 28 yrs). Besides reaction time (RT) and accuracy, we measured response force and derived two measures from the event-related EEG potential to form

Human factors assessment in PRA using task analysis linked evaluation technique (TALENT)

International Nuclear Information System (INIS)

Wells, J.E.; Banks, W.W.

1990-01-01

Human error is a primary contributor to risk in complex high-reliability systems. A 1985 U.S. Nuclear Regulatory Commission (USNRC) study of licensee event reports (LERs) suggests that upwards of 65% of commercial nuclear system failures involve human error. Since then, the USNRC has initiated research to fully and properly integrate human errors into the probabilistic risk assessment (PRA) process. The resulting implementation procedure is known as the Task Analysis Linked Evaluation Technique (TALENT). As indicated, TALENT is a broad-based method for integrating human factors expertise into the PRA process. This process achieves results which: (1) provide more realistic estimates of the impact of human performance on nuclear power safety, (2) can be fully audited, (3) provide a firm technical base for equipment-centered and personnel-centered retrofit/redesign of plants enabling them to meet internally and externally imposed safety standards, and (4) yield human and hardware data capable of supporting inquiries into human performance issues that transcend the individual plant. The TALENT procedure is being field-tested to verify its effectiveness and utility. The objectives of the field-test are to examine (1) the operability of the process, (2) its acceptability to the users, and (3) its usefulness for achieving measurable improvements in the credibility of the analysis. The field-test will provide the information needed to enhance the TALENT process

Automated acoustic analysis of task dependency in adductor spasmodic dysphonia versus muscle tension dysphonia.

Science.gov (United States)

Roy, Nelson; Mazin, Alqhazo; Awan, Shaheen N

2014-03-01

Distinguishing muscle tension dysphonia (MTD) from adductor spasmodic dysphonia (ADSD) can be difficult. Unlike MTD, ADSD is described as "task-dependent," implying that dysphonia severity varies depending upon the demands of the vocal task, with connected speech thought to be more symptomatic than sustained vowels. This study used an acoustic index of dysphonia severity (i.e., the Cepstral Spectral Index of Dysphonia [CSID]) to: 1) assess the value of "task dependency" to distinguish ADSD from MTD, and to 2) examine associations between the CSID and listener ratings. Case-Control Study. CSID estimates of dysphonia severity for connected speech and sustained vowels of patients with ADSD (n = 36) and MTD (n = 45) were compared. The diagnostic precision of task dependency (as evidenced by differences in CSID-estimated dysphonia severity between connected speech and sustained vowels) was examined. In ADSD, CSID-estimated severity for connected speech (M = 39. 2, SD = 22.0) was significantly worse than for sustained vowels (M = 29.3, SD = 21.9), [P = .020]. Whereas in MTD, no significant difference in CSID-estimated severity was observed between connected speech (M = 55.1, SD = 23.8) and sustained vowels (M = 50.0, SD = 27.4), [P = .177]. CSID evidence of task dependency correctly identified 66.7% of ADSD cases (sensitivity) and 64.4% of MTD cases (specificity). CSID and listener ratings were significantly correlated. Task dependency in ADSD, as revealed by differences in acoustically-derived estimates of dysphonia severity between connected speech and sustained vowel production, is a potentially valuable diagnostic marker. © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

A dual-task investigation of automaticity in visual word processing

Science.gov (United States)

McCann, R. S.; Remington, R. W.; Van Selst, M.

2000-01-01

An analysis of activation models of visual word processing suggests that frequency-sensitive forms of lexical processing should proceed normally while unattended. This hypothesis was tested by having participants perform a speeded pitch discrimination task followed by lexical decisions or word naming. As the stimulus onset asynchrony between the tasks was reduced, lexical-decision and naming latencies increased dramatically. Word-frequency effects were additive with the increase, indicating that frequency-sensitive processing was subject to postponement while attention was devoted to the other task. Either (a) the same neural hardware shares responsibility for lexical processing and central stages of choice reaction time task processing and cannot perform both computations simultaneously, or (b) lexical processing is blocked in order to optimize performance on the pitch discrimination task. Either way, word processing is not as automatic as activation models suggest.

The functional neuroanatomy of multitasking: combining dual tasking with a short term memory task.

Science.gov (United States)

Deprez, Sabine; Vandenbulcke, Mathieu; Peeters, Ron; Emsell, Louise; Amant, Frederic; Sunaert, Stefan

2013-09-01

Insight into the neural architecture of multitasking is crucial when investigating the pathophysiology of multitasking deficits in clinical populations. Presently, little is known about how the brain combines dual-tasking with a concurrent short-term memory task, despite the relevance of this mental operation in daily life and the frequency of complaints related to this process, in disease. In this study we aimed to examine how the brain responds when a memory task is added to dual-tasking. Thirty-three right-handed healthy volunteers (20 females, mean age 39.9 ± 5.8) were examined with functional brain imaging (fMRI). The paradigm consisted of two cross-modal single tasks (a visual and auditory temporal same-different task with short delay), a dual-task combining both single tasks simultaneously and a multi-task condition, combining the dual-task with an additional short-term memory task (temporal same-different visual task with long delay). Dual-tasking compared to both individual visual and auditory single tasks activated a predominantly right-sided fronto-parietal network and the cerebellum. When adding the additional short-term memory task, a larger and more bilateral frontoparietal network was recruited. We found enhanced activity during multitasking in components of the network that were already involved in dual-tasking, suggesting increased working memory demands, as well as recruitment of multitask-specific components including areas that are likely to be involved in online holding of visual stimuli in short-term memory such as occipito-temporal cortex. These results confirm concurrent neural processing of a visual short-term memory task during dual-tasking and provide evidence for an effective fMRI multitasking paradigm. © 2013 Elsevier Ltd. All rights reserved.